WorldWideScience

Sample records for p-type electrical conductivity

  1. Electrical conduction and dielectric relaxation in p-type PVA/CuI polymer composite

    Directory of Open Access Journals (Sweden)

    M.H. Makled

    2013-11-01

    Full Text Available PVA/CuI polymer composite samples have been prepared and subjected to characterizations using FT-IR spectroscopy, DSC analysis, ac spectroscopy and dc conduction. The FT-IR spectral analysis shows remarkable variation of the absorption peak positions whereas DSC illustrates a little decrease of both glass transition temperature, Tg, and crystallization fraction, χ, with increasing CuI concentration. An increase of dc conductivity for PVA/CuI nano composite by increasing CuI concentration is recoded up to 15 wt%, besides it obeys Arhenuis plot with an activation energy in the range 0.54–1.32 eV. The frequency dependence of ac conductivity showed power law with an exponent 0.33 < s < 0.69 which predicts hopping conduction mechanism. The frequency dependence of both dielectric permittivity and dielectric loss obeys Debye dispersion relations in wide range of temperatures and frequency. Significant values of dipole relaxation time obtained which are thermally activated with activation energies in the range 0.33–0.87 eV. A significant value of hopping distance in the range 3.4–1.2 nm is estimated in agreement with the value of Bohr radius of the exciton.

  2. Electrical conduction and dielectric relaxation in p-type PVA/CuI polymer composite.

    Science.gov (United States)

    Makled, M H; Sheha, E; Shanap, T S; El-Mansy, M K

    2013-11-01

    PVA/CuI polymer composite samples have been prepared and subjected to characterizations using FT-IR spectroscopy, DSC analysis, ac spectroscopy and dc conduction. The FT-IR spectral analysis shows remarkable variation of the absorption peak positions whereas DSC illustrates a little decrease of both glass transition temperature, Tg , and crystallization fraction, χ, with increasing CuI concentration. An increase of dc conductivity for PVA/CuI nano composite by increasing CuI concentration is recoded up to 15 wt%, besides it obeys Arhenuis plot with an activation energy in the range 0.54-1.32 eV. The frequency dependence of ac conductivity showed power law with an exponent 0.33 < s < 0.69 which predicts hopping conduction mechanism. The frequency dependence of both dielectric permittivity and dielectric loss obeys Debye dispersion relations in wide range of temperatures and frequency. Significant values of dipole relaxation time obtained which are thermally activated with activation energies in the range 0.33-0.87 eV. A significant value of hopping distance in the range 3.4-1.2 nm is estimated in agreement with the value of Bohr radius of the exciton.

  3. Change in the electrical conductivity of SnO{sub 2} crystal from n-type to p-type conductivity

    Energy Technology Data Exchange (ETDEWEB)

    Villamagua, Luis, E-mail: luis.villamagua@tyndall.ie [Grupo de Fisicoquímica de Materiales, Universidad Técnica Particular de Loja, Apartado 11-01-608, Loja (Ecuador); Dipartimento di Ingegneria per l’Ambiente e il Territorio e Ingegneria Chimica, Università della Calabria, 87036 Rende (CS) (Italy); Stashans, Arvids [Grupo de Fisicoquímica de Materiales, Universidad Técnica Particular de Loja, Apartado 11-01-608, Loja (Ecuador); Lee, Po-Ming; Liu, Yen-Shuo; Liu, Cheng-Yi [Department of Chemical and Materials Engineering, National Central University, Jhong-Li, Taiwan (China); Carini, Manuela [Dipartimento di Ingegneria per l’Ambiente e il Territorio e Ingegneria Chimica, Università della Calabria, 87036 Rende (CS) (Italy)

    2015-05-01

    Highlights: • Switch from n-type to p-type conductivity in SnO{sub 2} has been studied. • Computational DFT + U method where used. • X-ray diffraction and X-ray photoelectron spectroscopy where used. • Al- and N-codoped SnO{sub 2} compound shows stable p-type conductivity. • Low resistivity (3.657 × 10{sup −1} Ω cm) has been obtained. • High carrier concentration (4.858 × 10{sup 19} cm{sup −3}) has been obtained. - Abstract: The long-sought fully transparent technology will not come true if the n region of the p–n junction does not get as well developed as its p counterpart. Both experimental and theoretical efforts have to be used to study and discover phenomena occurring at the microscopic level in SnO{sub 2} systems. In the present paper, using the DFT + U approach as a main tool and the Vienna ab initio Simulation Package (VASP) we reproduce both intrinsic n-type as well as p-type conductivity in concordance to results observed in real samples of SnO{sub 2} material. Initially, an oxygen vacancy (1.56 mol% concentration) combined with a tin-interstitial (1.56 mol% concentration) scheme was used to achieve the n-type electrical conductivity. Later, to attain the p-type conductivity, crystal already possessing n-type conductivity, was codoped with nitrogen (1.56 mol% concentration) and aluminium (12.48 mol% concentration) impurities. Detailed explanation of structural changes endured by the geometry of the crystal as well as the changes in its electrical properties has been obtained. Our experimental data to a very good extent matches with the results found in the DFT + U modelling.

  4. P-type transparent conducting oxides

    Science.gov (United States)

    Zhang, Kelvin H. L.; Xi, Kai; Blamire, Mark G.; Egdell, Russell G.

    2016-09-01

    Transparent conducting oxides constitute a unique class of materials combining properties of electrical conductivity and optical transparency in a single material. They are needed for a wide range of applications including solar cells, flat panel displays, touch screens, light emitting diodes and transparent electronics. Most of the commercially available TCOs are n-type, such as Sn doped In2O3, Al doped ZnO, and F doped SnO2. However, the development of efficient p-type TCOs remains an outstanding challenge. This challenge is thought to be due to the localized nature of the O 2p derived valence band which leads to difficulty in introducing shallow acceptors and large hole effective masses. In 1997 Hosono and co-workers (1997 Nature 389 939) proposed the concept of ‘chemical modulation of the valence band’ to mitigate this problem using hybridization of O 2p orbitals with close-shell Cu 3d 10 orbitals. This work has sparked tremendous interest in designing p-TCO materials together with deep understanding the underlying materials physics. In this article, we will provide a comprehensive review on traditional and recently emergent p-TCOs, including Cu+-based delafossites, layered oxychalcogenides, nd 6 spinel oxides, Cr3+-based oxides (3d 3) and post-transition metal oxides with lone pair state (ns 2). We will focus our discussions on the basic materials physics of these materials in terms of electronic structures, doping and defect properties for p-type conductivity and optical properties. Device applications based on p-TCOs for transparent p-n junctions will also be briefly discussed.

  5. Structural, electrical and optical properties of p-type transparent conducting SnO{sub 2}:Al film derived from thermal diffusion of Al/SnO{sub 2}/Al multilayer thin films

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, J. [Key Laboratory of Silicate Materials Science and Engineering (Wuhan University of Technology), Ministry of Education, 122 Luoshi Road, Hongshan District, Wuhan, Hubei 430070 (China); Zhao, X.J., E-mail: opluse@whut.edu.cn [Key Laboratory of Silicate Materials Science and Engineering (Wuhan University of Technology), Ministry of Education, 122 Luoshi Road, Hongshan District, Wuhan, Hubei 430070 (China); Ni, J.M.; Tao, H.Z. [Key Laboratory of Silicate Materials Science and Engineering (Wuhan University of Technology), Ministry of Education, 122 Luoshi Road, Hongshan District, Wuhan, Hubei 430070 (China)

    2010-11-15

    Highly transparent, p-type conducting SnO{sub 2}:Al films derived from thermal diffusion of a sandwich structure Al/SnO{sub 2}/Al multilayer thin films deposited on quartz substrate have been prepared by direct current and radio-frequency magnetron sputtering using Al and SnO{sub 2} targets. The deposited films were annealed at various temperatures for different durations. The effect of thermal diffusing temperature and time on the structural, electrical and optical performances of SnO{sub 2}:Al films has been studied. X-ray diffraction results show that all p-type conducting films possessed polycrystalline SnO{sub 2} with tetragonal rutile structure. Hall-effect results indicate that 450 deg. C for 4 h were the optimum annealing parameters for p-type SnO{sub 2}:Al films, resulting in a relatively high hole concentration of 7.2 x 10{sup 18} cm{sup -3} and a low resistivity of 0.81 {Omega} cm. The transmission of the p-type SnO{sub 2}:Al films was above 80%.

  6. P-type conductivity in annealed strontium titanate

    Energy Technology Data Exchange (ETDEWEB)

    Poole, Violet M.; Corolewski, Caleb D.; McCluskey, Matthew D., E-mail: mattmcc@wsu.edu [Department of Physics and Astronomy, Washington State University, Pullman, WA 99164-2814 (United States)

    2015-12-15

    Hall-effect measurements indicate p-type conductivity in bulk, single-crystal strontium titanate (SrTiO{sub 3}, or STO) samples that were annealed at 1200°C. Room-temperature mobilities above 100 cm{sup 2}/V s were measured, an order of magnitude higher than those for electrons (5-10 cm{sup 2}/V s). Average hole densities were in the 10{sup 9}-10{sup 10} cm{sup −3} range, consistent with a deep acceptor.

  7. Electrical Conductivity.

    Science.gov (United States)

    Hershey, David R.; Sand, Susan

    1993-01-01

    Explains how electrical conductivity (EC) can be used to measure ion concentration in solutions. Describes instrumentation for the measurement, temperature dependence and EC, and the EC of common substances. (PR)

  8. Infrared Transparent Spinel Films with p -Type Conductivity

    Energy Technology Data Exchange (ETDEWEB)

    Windisch, Charles F.; Exarhos, Gregory J.; Ferris, Kim F.; Engelhard, Mark H.; Stewart, Donald C.

    2001-11-29

    Spinel oxide films containing at least two transition metal cations were found to exhibit p-type conductivity with high optical transparency from the visible to wavelengths near 15 micrometers. Resistivities as low as 0.003 ohm-cm were measured on 100 nm thick rf sputter deposited films that contained nickel and cobalt. Optical spectra, Raman scattering and XPS measurements indicated the valency of nickel localized on octahedral sites within the spinel lattice determines these properties. Electronic band structure calculations corroborated the experimental results. A resistivity minimum was found at the composition NiCo2O4 deposited from aqueous or alcoholic solutions followed by subsequent annealing at 400 degrees C in air. Solution deposited films richer in nickel than this stoichiometry always were found to phase separate into nickel oxide and a spinel phase with concomitant loss in conductivity. However, the phase stability region could be extended to higher nickel contents when rf-sputter deposition techniques were used. Sputter deposited spinel films having a nickel to cobalt ratio less than 2 were found to exhibit the highest conductivity. Results suggest that the phase stability region for these materials can be extended through appropriate choice of deposition conditions. A possible mechanism that promotes high conductivity in this system is thought to be charge transfer between the resident di- and trivalent cations that may be assisted by the magnetic nature of the oxide film.

  9. Synthesis of p-type and n-type nickel ferrites and associated electrical properties

    Energy Technology Data Exchange (ETDEWEB)

    Šutka, Andris, E-mail: andris.sutka@rtu.lv [Faculty of Material Science and Applied Chemistry, Riga Technical University, Paula Valdena 3, Riga, LV-1048 (Latvia); Institute of Physics, University of Tartu, Ravila 14c, 50411, 51014 Tartu (Estonia); Pärna, Rainer [Institute of Physics, University of Tartu, Ravila 14c, 50411, 51014 Tartu (Estonia); Estonian Nanotechnology Competence Centre, Ravila 14c, 50411, 51014 Tartu (Estonia); Käämbre, Tanel [Institute of Physics, University of Tartu, Ravila 14c, 50411, 51014 Tartu (Estonia); Kisand, Vambola [Institute of Physics, University of Tartu, Ravila 14c, 50411, 51014 Tartu (Estonia); Estonian Nanotechnology Competence Centre, Ravila 14c, 50411, 51014 Tartu (Estonia)

    2015-01-01

    We used sol–gel auto combustion to synthesize nickel ferrites of p-type and n-type conductivity by controlling the relative amounts of nickel and iron during synthesis. The obtained samples have been characterized by XRD, FE-SEM, electrical measurements and XPS. We observe huge differences in the effect of grain size on the electrical resistivity between the p-type and the n-type material when the grain size increases from nano to micro scale during annealing at temperatures from 900 {sup o}C to 1300 {sup o}C. The observed resistivity decrease (due to grain size) is four orders of magnitude in the n-type nickel ferrite, whereas the p-type material remains virtually unaffected. We rationalize this drastic difference to stem from a reverse contrast of the surface (grain shell) versus bulk (grain core) conductivity between p- and n-type ferrite. With the grain shells in p-type the easier charge carrier path the effect of scatter at grain boundaries is accordingly diminished, whereas in the n-type charge transport properties are controlled by (the number of) grain boundaries in a conduction path.

  10. Enhanced thermopower and low thermal conductivity in p-type polycrystalline ZrTe5

    Science.gov (United States)

    Hooda, M. K.; Yadav, C. S.

    2017-07-01

    Thermoelectric properties of polycrystalline p-type ZrTe5 are reported in the temperature (T) range of 2-340 K. Thermoelectric power (S) is positive and reaches up to 458 μV/K at 340 K on increasing T. The value of Fermi energy 16 meV suggests a low carrier density of ≈9.5 × 1018 cm-3. A sharp anomaly in S data is observed at 38 K, which seems intrinsic to p-type ZrTe5. The thermal conductivity (κ) value is low (2 W/m K at T = 300 K) with major contribution from the lattice part. Electrical resistivity data show the metal to semiconductor transition at T ˜ 150 K and non-Arrhenius behavior in the semiconducting region. The figure of merit zT (0.026 at T = 300 K) is ˜63% higher than that of HfTe5 (0.016) and better than those of the conventional SnTe, p-type PbTe, and bipolar pristine ZrTe5 compounds.

  11. Interstitial oxygen as a source of p-type conductivity in hexagonal manganites

    Science.gov (United States)

    Skjærvø, Sandra H.; Wefring, Espen T.; Nesdal, Silje K.; Gaukås, Nikolai H.; Olsen, Gerhard H.; Glaum, Julia; Tybell, Thomas; Selbach, Sverre M.

    2016-12-01

    Hexagonal manganites, h-RMnO3 (R=Sc, Y, Ho-Lu), have been intensively studied for their multiferroic properties, magnetoelectric coupling, topological defects and electrically conducting domain walls. Although point defects strongly affect the conductivity of transition metal oxides, the defect chemistry of h-RMnO3 has received little attention. We use a combination of experiments and first principles electronic structure calculations to elucidate the effect of interstitial oxygen anions, Oi, on the electrical and structural properties of h-YMnO3. Enthalpy stabilized interstitial oxygen anions are shown to be the main source of p-type electronic conductivity, without reducing the spontaneous ferroelectric polarization. A low energy barrier interstitialcy mechanism is inferred from Density Functional Theory calculations to be the microscopic migration path of Oi. Since the Oi content governs the concentration of charge carrier holes, controlling the thermal and atmospheric history provides a simple and fully reversible way of tuning the electrical properties of h-RMnO3.

  12. Atomic layer deposition of undoped TiO2 exhibiting p-type conductivity.

    Science.gov (United States)

    Iancu, Andrei T; Logar, Manca; Park, Joonsuk; Prinz, Fritz B

    2015-03-11

    With prominent photocatalytic applications and widespread use in semiconductor devices, TiO2 is one of the most popular metal oxides. However, despite its popularity, it has yet to achieve its full potential due to a lack of effective methods for achieving p-type conductivity. Here, we show that undoped p-type TiO2 films can be fabricated by atomic layer deposition (ALD) and that their electrical properties can be controlled across a wide range using proper postprocessing anneals in various ambient environments. Hole mobilities larger than 400 cm(2)/(V·s) are accessible superseding the use of extrinsic doping, which generally produces orders of magnitude smaller values. Through a combination of analyses and experiments, we provide evidence that this behavior is primarily due to an excess of oxygen in the films. This discovery enables entirely new categories of TiO2 devices and applications, and unlocks the potential to improve existing ones. TiO2 homojunction diodes fabricated completely by ALD are developed as a demonstration of the utility of these techniques and shown to exhibit useful rectifying characteristics even with minimal processing refinement.

  13. Theoretical prediction of p-type transparent conductivity in Zn-doped TiO2.

    Science.gov (United States)

    Han, Xiaoping; Shao, Guosheng

    2013-06-28

    It is very difficult and yet extremely important to fill the wide technological gap in developing transparent conducting oxides (TCOs) that exhibit excellent p-type conducting characteristics. Here, on the basis of extensive first-principles calculations, we discover for the first time potentially promising p-type transparent conductivity in Zn-doped TiO2 under oxygen rich conditions. Efforts have been made to elaborate the effects of possible defects and their interaction with Zn doping on the p-type transparent conductivity. This work offers a fundamental road map for cost-effective development of p-type TCOs based on TiO2, which is a cheap and stable material system of large natural resources.

  14. Luminance behavior of lithium-doped ZnO nanowires with p-type conduction characteristics.

    Science.gov (United States)

    Ko, Won Bae; Lee, Jun Seok; Lee, Sang Hyo; Cha, Seung Nam; Sohn, Jung Inn; Kim, Jong Min; Park, Young Jun; Kim, Hyun Jung; Hong, Jin Pyo

    2013-09-01

    The present study describes the room-temperature cathodeluminescence (CL) and temperature-dependent photoluminescence (PL) properties of p-type lithium (Li)-doped zinc oxide (ZnO) nanowires (NWs) grown by hydrothermal doping and post-annealing processes. A ZnO thin film was used as a seed layer in NW growth. The emission wavelengths and intensities of undoped ZnO NWs and p-type Li-doped ZnO NWs were analyzed for comparison. CL and PL observations of post-annealed p-type Li-doped ZnO NWs clearly exhibited a dominant sharp band-edge emission. Finally, a n-type ZnO thin film/p-type annealed Li-doped ZnO NW homojunction diode was prepared to confirm the p-type conduction of annealed Li-doped ZnO NWs as well as the structural properties measured by transmission electron microscopy.

  15. Perovskite Sr-doped LaCrO3 as a new p-type transparent conducting oxide

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Hongliang; Du, Yingge; Papadogianni, Alexandra; Bierwagen, Oliver; Sallis, Shawn; Piper, Louis F. J.; Bowden, Mark E.; Shutthanandan, V.; Sushko, Petr; Chambers, Scott A.

    2015-09-16

    Transparent conducting oxides (TCOs) constitute a unique class of materials which combine the seemingly mutually exclusive properties of electrical conductivity and optical transparency in a single material. TCOs are useful for a wide range of applications including solar cells, displays, light emitting diodes and transparent electronics. Simple post-transition metal oxides such as ZnO, In2O3 and SnO2 are wide gap insulators in which the ionic character generates an oxygen 2p-derived valence band (VB) and a metal s-derived conduction band (CB), resulting in large optical band gaps (>3.0 eV) and excellent n-type conductivity when donor doped. In contrast, the development of efficient p-type TCOs remains a global materials challenge. Converting n-type oxides to p-type analogs by acceptor doping is extremely difficult and these materials display poor conductivity.

  16. Method for producing high carrier concentration p-Type transparent conducting oxides

    Science.gov (United States)

    Li, Xiaonan; Yan, Yanfa; Coutts, Timothy J.; Gessert, Timothy A.; Dehart, Clay M.

    2009-04-14

    A method for producing transparent p-type conducting oxide films without co-doping plasma enhancement or high temperature comprising: a) introducing a dialkyl metal at ambient temperature and a saturated pressure in a carrier gas into a low pressure deposition chamber, and b) introducing NO alone or with an oxidizer into the chamber under an environment sufficient to produce a metal-rich condition to enable NO decomposition and atomic nitrogen incorporation into the formed transparent metal conducting oxide.

  17. Electrically conductive cellulose composite

    Science.gov (United States)

    Evans, Barbara R.; O'Neill, Hugh M.; Woodward, Jonathan

    2010-05-04

    An electrically conductive cellulose composite includes a cellulose matrix and an electrically conductive carbonaceous material incorporated into the cellulose matrix. The electrical conductivity of the cellulose composite is at least 10 .mu.S/cm at 25.degree. C. The composite can be made by incorporating the electrically conductive carbonaceous material into a culture medium with a cellulose-producing organism, such as Gluconoacetobacter hansenii. The composites can be used to form electrodes, such as for use in membrane electrode assemblies for fuel cells.

  18. Interstitial oxygen as a source of p-type conductivity in hexagonal manganites

    National Research Council Canada - National Science Library

    Sandra H Skjærvø; Espen T Wefring; Silje K Nesdal; Nikolai H Gaukås; Gerhard H Olsen; Julia Glaum; Thomas Tybell; Sverre M Selbach

    2016-01-01

      Hexagonal manganites, h-RMnO3 (R=Sc, Y, Ho-Lu), have been intensively studied for their multiferroic properties, magnetoelectric coupling, topological defects and electrically conducting domain walls...

  19. Enhanced photovoltaic effect of ruthenium complex-modified graphene oxide with P-type conductivity

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Wei, E-mail: jj_zw_js@sina.com.cn; Bai, Huicong; Zhang, Yu; Sun, Ying; Lin, Shen; Liu, Jian; Yang, Qi; Song, Xi-Ming, E-mail: songlab@lnu.edu.cn

    2014-10-15

    A graphene oxide nanocomposite with bis(1,10-phenanthroline)(N-(2-aminoethyl)-4-(4-methyl-2,2-bipyridine-4-yl) formamide) ruthenium (Ru(phen){sub 2}(bpy-NH{sub 2})(PF{sub 6}){sub 2}), a ruthenium complex, was synthesized by amidation reaction between amino group of the ruthenium complex and carboxyl group of GO. The as-prepared Ru(II)–GO composite was characterized by infrared (IR) spectroscopy, X-ray photoelectron spectroscopy (XPS), ultraviolet–visible (UV–Vis) absorption spectra, fluorescence spectra, surface photovoltage (SPV) spectrum and transient photovoltage (TPV) technology. This nanocomposite showed a typical p-type character and an enhanced photovoltaic effect at long timescale of about 3 × 10{sup −3} s compared to GO alone. A reversible rise/decay of the photocurrent in response to the on/off illumination step was also observed in a photoelectrochemical cell of the Ru(II)–GO composite. The photocurrent response of the Ru(II)–GO film was remarkably higher than that of GO film. Therefore, this Ru(II)–GO composite is believed to be a promising p-type photoelectric conversion material for further photovoltaic applications. - Highlights: • A new dye-sensitized graphene oxide nanocomposite was reported. • A photo-induced charge transfer process in this nanocomposite was confirmed. • This composite showed a typical p-type conductivity. • This composite showed an enhanced photovoltaic effect at a long timescale.

  20. Electrically Conducting Polymers.

    Science.gov (United States)

    1983-04-07

    polypyrrole, the oxidized polythiophene is also unstable in air. A rather different class of conducting polymers lies outside the scope of this review but...AD-A129 488 ELECTRICALLY CONDUCTING POLYNERS(U) IBM RESEARCH LAB / SAN JOSE CA W D GILL ET RL. 97 APR 83 TR-B UNCLASSIFIED F/G 7/3 N I Ihhhhhhhhhhhhl...00 Contract N00014-80-C-0779 Technical Report No. 8 *Electrically Conducting Polymers by W. D. Gill, T. C. Clarke, and G. B. Street Prepared for

  1. Electrical Conductivity in Textiles

    Science.gov (United States)

    2006-01-01

    Copper is the most widely used electrical conductor. Like most metals, though, it has several drawbacks: it is heavy, expensive, and can break. Fibers that conduct electricity could be the solutions to these problems, and they are of great interest to NASA. Conductive fibers provide lightweight alternatives to heavy copper wiring in a variety of settings, including aerospace, where weight is always a chief concern. This is an area where NASA is always seeking improved materials. The fibers are also more cost-effective than metals. Expenditure is another area where NASA is always looking to make improvements. In the case of electronics that are confined to small spaces and subject to severe stress, copper is prone to breaking and losing connection over time. Flexible conductive fibers eliminate that problem. They are more supple and stronger than brittle copper and, thus, find good use in these and similar situations. While clearly a much-needed material, electrically conductive fibers are not readily available. The cost of new technology development, with all the pitfalls of troubleshooting production and the years of testing, and without the guarantee of an immediate market, is often too much of a financial hazard for companies to risk. NASA, however, saw the need for electrical fibers in its many projects and sought out a high-tech textile company that was already experimenting in this field, Syscom Technology, Inc., of Columbus, Ohio. Syscom was founded in 1993 to provide computer software engineering services and basic materials research in the areas of high-performance polymer fibers and films. In 1999, Syscom decided to focus its business and technical efforts on development of high-strength, high-performance, and electrically conductive polymer fibers. The company developed AmberStrand, an electrically conductive, low-weight, strong-yet-flexible hybrid metal-polymer YARN.

  2. Fabrication of p-type conductivity in SnO{sub 2} thin films through Ga doping

    Energy Technology Data Exchange (ETDEWEB)

    Tsay, Chien-Yie, E-mail: cytsay@fcu.edu.tw; Liang, Shan-Chien

    2015-02-15

    Highlights: • P-type Ga-doped SnO{sub 2} semiconductor films were prepared by sol-gel spin coating. • Optical bandgaps of the SnO{sub 2}:Ga films are narrower than that of the SnO{sub 2} film. • SnO{sub 2}:Ga films exhibited p-type conductivity as Ga doping content higher than 10%. • A p-n heterojunction composed of p-type SnO{sub 2}:Ga and n-type ZnO:Al was fabricated. - Abstract: P-type transparent tin oxide (SnO{sub 2}) based semiconductor thin films were deposited onto alkali-free glass substrates by a sol-gel spin-coating method using gallium (Ga) as acceptor dopant. In this study, we investigated the influence of Ga doping concentration ([Ga]/[Sn] + [Ga] = 0%, 5%, 10%, 15%, and 20%) on the structural, optical and electrical properties of SnO{sub 2} thin films. XRD analysis results showed that dried Ga-doped SnO{sub 2} (SnO{sub 2}:Ga) sol-gel films annealed in oxygen ambient at 520 °C for 1 h exhibited only the tetragonal rutile phase. The average optical transmittance of as-prepared thin film samples was higher than 87.0% in the visible light region; the optical band gap energy slightly decreased from 3.92 eV to 3.83 eV with increases in Ga doping content. Hall effect measurement showed that the nature of conductivity of SnO{sub 2}:Ga thin films changed from n-type to p-type when the Ga doping level was 10%, and when it was at 15%, Ga-doped SnO{sub 2} thin films exhibited the highest mean hole concentration of 1.70 × 10{sup 18} cm{sup -3}. Furthermore, a transparent p-SnO{sub 2}:Ga (Ga doping level of 15%)/n-ZnO:Al (Al doping level of 2%) heterojunction was fabricated on alkali-free glass. The I-V curve measurement for the p-n heterojunction diode showed a typical rectifying characteristic with a forward turn-on voltage of 0.65 V.

  3. Electrically Conductive Porous Membrane

    Science.gov (United States)

    Burke, Kenneth Alan (Inventor)

    2014-01-01

    The present invention relates to an electrically conductive membrane that can be configured to be used in fuel cell systems to act as a hydrophilic water separator internal to the fuel cell, or as a water separator used with water vapor fed electrolysis cells, or as a water separator used with water vapor fed electrolysis cells, or as a capillary structure in a thin head pipe evaporator, or as a hydrophobic gas diffusion layer covering the fuel cell electrode surface in a fuel cell.

  4. Large area growth and electrical properties of p-type WSe2 atomic layers.

    Science.gov (United States)

    Zhou, Hailong; Wang, Chen; Shaw, Jonathan C; Cheng, Rui; Chen, Yu; Huang, Xiaoqing; Liu, Yuan; Weiss, Nathan O; Lin, Zhaoyang; Huang, Yu; Duan, Xiangfeng

    2015-01-14

    Transition metal dichacogenides represent a unique class of two-dimensional layered materials that can be exfoliated into single or few atomic layers. Tungsten diselenide (WSe(2)) is one typical example with p-type semiconductor characteristics. Bulk WSe(2) has an indirect band gap (∼ 1.2 eV), which transits into a direct band gap (∼ 1.65 eV) in monolayers. Monolayer WSe(2), therefore, is of considerable interest as a new electronic material for functional electronics and optoelectronics. However, the controllable synthesis of large-area WSe(2) atomic layers remains a challenge. The studies on WSe(2) are largely limited by relatively small lateral size of exfoliated flakes and poor yield, which has significantly restricted the large-scale applications of the WSe(2) atomic layers. Here, we report a systematic study of chemical vapor deposition approach for large area growth of atomically thin WSe(2) film with the lateral dimensions up to ∼ 1 cm(2). Microphotoluminescence mapping indicates distinct layer dependent efficiency. The monolayer area exhibits much stronger light emission than bilayer or multilayers, consistent with the expected transition to direct band gap in the monolayer limit. The transmission electron microscopy studies demonstrate excellent crystalline quality of the atomically thin WSe(2). Electrical transport studies further show that the p-type WSe(2) field-effect transistors exhibit excellent electronic characteristics with effective hole carrier mobility up to 100 cm(2) V(-1) s(-1) for monolayer and up to 350 cm(2) V(-1) s(-1) for few-layer materials at room temperature, comparable or well above that of previously reported mobility values for the synthetic WSe(2) and comparable to the best exfoliated materials.

  5. Electrical Detection of the Helical Spin Texture in a p-type Topological Insulator Sb2Te3

    Science.gov (United States)

    Li, C. H.; van ‘T Erve, O. M. J.; Li, Y. Y.; Li, L.; Jonker, B. T.

    2016-07-01

    The surface states of 3D topological insulators (TIs) exhibit a helical spin texture with spin locked at right angles with momentum. The chirality of this spin texture is expected to invert crossing the Dirac point, a property that has been experimentally observed by optical probes. Here, we directly determine the chirality below the Dirac point by electrically detecting spin-momentum locking in surface states of a p-type TI, Sb2Te3. A current flowing in the Sb2Te3 surface states generates a net spin polarization due to spin-momentum locking, which is electrically detected as a voltage on an Fe/Al2O3 tunnel barrier detector. Measurements of this voltage as a function of current direction and detector magnetization indicate that hole spin-momentum locking follows the right-hand rule, opposite that of electron, providing direct confirmation that the chirality is indeed inverted below Dirac point. The spin signal is linear with current, and exhibits a temperature dependence consistent with the semiconducting nature of the TI film and freeze-out of bulk conduction below 100 K. Our results demonstrate that the chirality of the helical spin texture of TI surface states can be determined electrically, an enabling step in the electrical manipulation of spins in next generation TI-based quantum devices.

  6. Sensitization of p-type NiO using n-type conducting polymers

    NARCIS (Netherlands)

    Chavhan, S.D.; Abellon, R.D.; Breemen, A.J.J.M. van; Koetse, M.M.; Sweelssen, J.; Savenije, T.J.

    2010-01-01

    We report on the sensitization of a p-type inorganic semiconductor, NiO, by n-type conjugated polymers. NiO thin films were deposited using RF sputtering in pure Ar (NiO A) or in Ar + O2 (90% + 10%) (NiO B). XPS and Kelvin probe measurements indicate the incorporation of oxygen in NiO B

  7. Sensitization of p-type NiO using n-type conducting polymers

    NARCIS (Netherlands)

    Chavhan, S.D.; Abellon, R.D.; Breemen, A.J.J.M. van; Koetse, M.M.; Sweelssen, J.; Savenije, T.J.

    2010-01-01

    We report on the sensitization of a p-type inorganic semiconductor, NiO, by n-type conjugated polymers. NiO thin films were deposited using RF sputtering in pure Ar (NiO A) or in Ar + O2 (90% + 10%) (NiO B). XPS and Kelvin probe measurements indicate the incorporation of oxygen in NiO B l

  8. Sensitization of p-type NiO using n-type conducting polymers

    NARCIS (Netherlands)

    Chavhan, S.D.; Abellon, R.D.; Breemen, A.J.J.M. van; Koetse, M.M.; Sweelssen, J.; Savenije, T.J.

    2010-01-01

    We report on the sensitization of a p-type inorganic semiconductor, NiO, by n-type conjugated polymers. NiO thin films were deposited using RF sputtering in pure Ar (NiO A) or in Ar + O2 (90% + 10%) (NiO B). XPS and Kelvin probe measurements indicate the incorporation of oxygen in NiO B l

  9. Enhanced p-type conductivity and band gap narrowing in heavily Al doped NiO thin films deposited by RF magnetron sputtering.

    Science.gov (United States)

    Nandy, S; Maiti, U N; Ghosh, C K; Chattopadhyay, K K

    2009-03-18

    Stoichiometric NiO, a Mott-Hubbard insulator at room temperature, shows p-type electrical conduction due to the introduction of Ni(2+) vacancies (V(Ni)('')) and self-doping of Ni(3+) ions in the presence of excess oxygen. The electrical conductivity of this important material is low and not sufficient for active device fabrication. Al doped NiO thin films were synthesized by radio frequency (RF) magnetron sputtering on glass substrates at a substrate temperature of 250 °C in an oxygen + argon atmosphere in order to enhance the p-type electrical conductivity. X-ray diffraction studies confirmed the correct phase formation and also oriented growth of NiO thin films. Al doping was confirmed by x-ray photoelectron spectroscopic studies. The structural, electrical and optical properties of the films were investigated as a function of Al doping (0-4 wt%) in the target. The room temperature electrical conductivity increased from 0.01-0.32 S cm (-1) for 0-4% Al doping. With increasing Al doping, above the Mott critical carrier density, energy band gap shrinkage was observed. This was explained by the shift of the band edges due to the existence of exchange and correlation energies amongst the electron-electron and hole-hole systems and also by the interaction between the impurity quasi-particle system.

  10. Room temperature p-type conductivity and coexistence of ferroelectric order in ferromagnetic Li doped ZnO nanoparticles

    KAUST Repository

    Awan, Saif Ullah

    2014-10-28

    Memory and switching devices acquired new materials which exhibit ferroelectric and ferromagnetic order simultaneously. We reported multiferroic behavior in Zn1-yLiyO(0.00≤y≤0.10) nanoparticles. The analysis of transmission electron micrographs confirmed the hexagonal morphology and wurtzite crystalline structure. We investigated p-type conductivity in doped samples and measured hole carriers in range 2.4×1017/cc to 7.3×1017/cc for different Li contents. We found that hole carriers are responsible for long range order ferromagnetic coupling in Li doped samples. Room temperature ferroelectric hysteresis loops were observed in 8% and 10% Li doped samples. We demonstrated ferroelectric coercivity (remnant polarization) 2.5kV/cm (0.11 μC/cm2) and 2.8kV/cm (0.15 μC/cm2) for y=0.08 and y=0.10 samples. We propose that the mechanism of Li induced ferroelectricity in ZnO is due to indirect dipole interaction via hole carriers. We investigated that if the sample has hole carriers ≥5.3×1017/cc, they can mediate the ferroelectricity. Ferroelectric and ferromagnetic measurements showed that higher electric polarization and larger magnetic moment is attained when the hole concentration is larger and vice versa. Our results confirmed the hole dependent coexistence of ferromagnetic and ferroelectric behavior at room temperature, which provide potential applications for switchable and memory devices.

  11. Optical and Electrical Effects of p-type μc-SiOx:H in Thin-Film Silicon Solar Cells on Various Front Textures

    Directory of Open Access Journals (Sweden)

    Chao Zhang

    2014-01-01

    Full Text Available p-type hydrogenated microcrystalline silicon oxide (µc-SiOx:H was developed and implemented as a contact layer in hydrogenated amorphous silicon (a-Si:H single junction solar cells. Higher transparency, sufficient electrical conductivity, low ohmic contact to sputtered ZnO:Al, and tunable refractive index make p-type µc-SiOx:H a promising alternative to the commonly used p-type hydrogenated microcrystalline silicon (µc-Si:H contact layers. In this work, p-type µc-SiOx:H layers were fabricated with a conductivity of up to 10−2 S/cm and a Raman crystallinity of above 60%. Furthermore, we present p-type µc-SiOx:H films with a broad range of optical properties (2.1 eV < band gap E04<2.8 eV and 1.6 < refractive index n<2.6. These properties can be tuned by adapting deposition parameters, for example, the CO2/SiH4 deposition gas ratio. A conversion efficiency improvement of a-Si:H solar cells is achieved by applying p-type µc-SiOx:H contact layer compared to the standard p-type µc-Si:H contact layer. As another aspect, the influence of the front side texture on a-Si:H p-i-n solar cells with different p-type contact layers, µc-Si:H and µc-SiOx:H, is investigated. Furthermore, we discuss the correlation between the decrease of Voc and the cell surface area derived from AFM measurements.

  12. Fabrication and electrical characterization of Al/DNA-CTMA/ p-type a-Si:H photodiode based on DNA-CTMA biomaterial

    Science.gov (United States)

    Siva Pratap Reddy, M.; Puneetha, Peddathimula; Lee, Young-Woong; Jeong, Seong-Hoon; Park, Chinho

    2017-01-01

    In this work, a deoxyribonucleic acid-cetyltrimethylammonium chloride (DNA-CTMA) biomaterial based p-type hydrogenated amorphous silicon ( a-Si:H) photodiode (PD) is fabricated and its electrical characteristics are investigated. The Al/DNA-CTMA/ p-type a-Si:H PD parameters are studied using current-voltage ( I-V), capacitancevoltage-frequency ( C-V-f) and conductance-voltage-frequency ( G/ω-V-f) measurements. The barrier height and the ideality factor of the diode are found to be 0.78 eV and 1.9, respectively. The electrical and photoconductivity properties of the diode are analyzed by using dark I-V and transient photocurrent techniques. The C-V-f and G/ω-V-f measurements indicate that the capacitance and conductance of the diode depend on the voltage and frequency, respectively. The experimental results reveal that the decreases in capacitance and the increases in conductance with an increase in frequency can be explained on the basis of interface states ( N SS ). Series resistance ( R S ) measurements are performed on the diode and discussed here. The obtained electrical parameters confirm that the Al/DNA-CTMA/ p-type a-Si:H PD can be used as an optical sensor for the development of commercial applications that are environmentally benign. [Figure not available: see fulltext.

  13. The influence of substrate and annealing temperatures on electrical properties of p-type ZnO films

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, C.Y. [Department of Mathematics and Physics, Shanghai Institute of technology, 120 Cao Bao Road, Shanghai 200235 (China)], E-mail: zhang_canyun@sit.edu.cn

    2009-01-15

    In this study, p-type ZnO films with excellent electrical properties were prepared by ultrasonic spray pyrolysis (USP) combining with a N-Al codoping technique. The influence of the substrate temperature and annealing temperature on electrical properties of ZnO films was investigated. The growth and doping process of ZnO films was explored by thermogravimetry, differential scanning calorimetry and mass spectrum (TG-DSC-MS) measurements. It is suggested that the variation of electrical properties of ZnO films with the substrate temperature and annealing temperature results from the removal of H element out of the films.

  14. Electrically conductive anodized aluminum coatings

    Science.gov (United States)

    Alwitt, Robert S. (Inventor); Liu, Yanming (Inventor)

    2001-01-01

    A process for producing anodized aluminum with enhanced electrical conductivity, comprising anodic oxidation of aluminum alloy substrate, electrolytic deposition of a small amount of metal into the pores of the anodized aluminum, and electrolytic anodic deposition of an electrically conductive oxide, including manganese dioxide, into the pores containing the metal deposit; and the product produced by the process.

  15. Effects of air-annealing on the electrical properties of p-type tin monoxide thin-film transistors

    Science.gov (United States)

    Cho, In-Tak; U, Myeonghun; Song, Sang-Hun; Lee, Jong-Ho; Kwon, Hyuck-In

    2014-04-01

    We have investigated the effects of air-annealing on the electrical performance of the p-type tin oxide thin-film transistors (TFTs). The air-annealing of the tin oxide thin-film was made using a mini furnace at various temperatures. From the x-ray photoelectron spectroscopy (XPS) and x-ray diffraction (XRD) data, it is demonstrated that the phase of tin oxide partially transforms from SnO to SnO2 with an air-annealing process, and it accelerates as the annealing temperature increases. The electrical performance of the p-type tin oxide TFT with a channel thickness of 25 nm exhibits much improved electrical performance when air-annealed at 230 °C for 1 h, but a decrease of the on-current is observed with an ambipolar operation in 260 and 290 °C air-annealed devices. Based on the XPS, XRD, and Hall measurement data, the reduced hole concentration inside the channel due to the recombination with electrons from SnO2 is believed to be the reason for the electrical performance improvement in 230 °C air-annealed p-type tin oxide TFTs, and a partial formation of n-type SnO2 channel is considered as the plausible reason for the ambipolar operation in tin oxide TFTs with high annealing temperatures. Our experimental results show that there is an optimum air-annealing temperature which can improve the electrical performance in p-type tin oxide TFTs.

  16. The electrical properties of photodiodes based on nanostructure gallium doped cadmium oxide/p-type silicon junctions

    Science.gov (United States)

    Çavaş, M.; Yakuphanoğlu, F.; Karataş, Ş.

    2017-01-01

    Gallium doped cadmium-oxide (CdO: Ga) thin films were successfully deposited by sol-gel spin coating method on p-type Si substrate. The electrical properties of the photodiode based on nanostructure Ga doped n-CdO/p-Si junctions were investigated. The current-voltage (I-V) characteristics of the structure were investigated under various light intensity and dark. It was observed that generated photocurrent of the Au/n-CdO/p-Si junctions depended on light intensity. The capacitance-voltage and conductance-voltage measurements were carried out for this diode in the frequency range between 100 and 1000 kHz at room temperature by steps of 100 kHz. The capacitance decreased with increasing frequency due to a continuous distribution of the interface states. These results suggested that the Au/n-CdO/p-Si Schottky junctions could be utilized as a photosensor. Furthermore, the voltage and frequency dependence of series resistance were calculated from the C-V and G/ω-V measurements and plotted as functions of voltage and frequency. The distribution profile of R S -V gave a peak in the depletion region at low frequencies and disappeared with increasing frequencies.

  17. Lead free CH3NH3SnI3 perovskite thin-film with p-type semiconducting nature and metal-like conductivity

    OpenAIRE

    2016-01-01

    Lead free CH3NH3SnI3 perovskite thin film was prepared by low temperature solution processing and characterized using current sensing atomic force microscopy (CS-AFM). Analysis of electrical, optical, and optoelectrical properties reveals unique p-type semiconducting nature and metal like conductivity of this material. CH3NH3SnI3 film also showed a strong absorption in visible and near infrared spectrum with absorption onset of 1.3 eV. X-ray Diffraction analysis and scanning electron microsco...

  18. Electrically Conductive Anodized Aluminum Surfaces

    Science.gov (United States)

    Nguyen, Trung Hung

    2006-01-01

    Anodized aluminum components can be treated to make them sufficiently electrically conductive to suppress discharges of static electricity. The treatment was conceived as a means of preventing static electric discharges on exterior satin-anodized aluminum (SAA) surfaces of spacecraft without adversely affecting the thermal-control/optical properties of the SAA and without need to apply electrically conductive paints, which eventually peel off in the harsh environment of outer space. The treatment can also be used to impart electrical conductivity to anodized housings of computers, medical electronic instruments, telephoneexchange equipment, and other terrestrial electronic equipment vulnerable to electrostatic discharge. The electrical resistivity of a typical anodized aluminum surface layer lies between 10(exp 11) and 10(exp 13) Omega-cm. To suppress electrostatic discharge, it is necessary to reduce the electrical resistivity significantly - preferably to anodized surface becomes covered and the pores in the surface filled with a transparent, electrically conductive metal oxide nanocomposite. Filling the pores with the nanocomposite reduces the transverse electrical resistivity and, in the original intended outer-space application, the exterior covering portion of the nanocomposite would afford the requisite electrical contact with the outer-space plasma. The electrical resistivity of the nanocomposite can be tailored to a value between 10(exp 7) and 10(exp 12) Omega-cm. Unlike electrically conductive paint, the nanocomposite becomes an integral part of the anodized aluminum substrate, without need for adhesive bonding material and without risk of subsequent peeling. The electrodeposition process is compatible with commercial anodizing production lines. At present, the electronics industry uses expensive, exotic, electrostaticdischarge- suppressing finishes: examples include silver impregnated anodized, black electroless nickel, black chrome, and black copper. In

  19. Conduction mechanisms in p-type Pb{sub 1-x}Eu{sub x}Te alloys in the insulator regime

    Energy Technology Data Exchange (ETDEWEB)

    Peres, M. L.; Rubinger, R. M.; Ribeiro, L. H.; Rubinger, C. P. L. [Departamento de Fisica e Quimica, Instituto de Ciencias Exatas, Universidade Federal de Itajuba, Itajuba, PB 50, MG CEP 37500-903 (Brazil); Ribeiro, G. M. [Departamento de Fisica, ICEx, Universidade Federal de Minas Gerais, Belo Horizonte, PB 702, MG CEP 30123-970 (Brazil); Chitta, V. A. [Instituto de Fisica, Universidade de Sao Paulo, Sao Paulo, PB 66318, SP CEP 05315-970 (Brazil); Rappl, P. H. O.; Abramof, E. [Laboratorio Associado de Sensores e Materiais, Instituto Nacional de Pesquisas Espaciais, Sao Jose dos Campos, PB 515, SP CEP 12201-970 (Brazil)

    2012-06-15

    Electrical resistivity measurements were performed on p-type Pb{sub 1-x}Eu{sub x}Te films with Eu content x = 4%, 5%, 6%, 8%, and 9%. The well-known metal-insulator transition that occurs around 5% at room temperature due to the introduction of Eu is observed, and we used the differential activation energy method to study the conduction mechanisms present in these samples. In the insulator regime (x > 6%), we found that band conduction is the dominating conduction mechanism for high temperatures with carriers excitation between the valence band and the 4f levels originated from the Eu atoms. We also verified that mix conduction dominates the low temperatures region. Samples with x = 4% and 5% present a temperature dependent metal insulator transition and we found that this dependence can be related to the relation between the thermal energy k{sub B}T and the activation energy {Delta}{epsilon}{sub a}. The physical description obtained through the activation energy analysis gives a new insight about the conduction mechanisms in insulating p-type Pb{sub 1-x}Eu{sub x}Te films and also shed some light over the influence of the 4f levels on the transport process in the insulator region.

  20. Electrical Conductivity of Cryolite Melts

    Science.gov (United States)

    Fellner, P.; Grjotheim, K.; Kvande, H.

    1985-11-01

    This paper proposes an equation for the electrical conductivity of multicomponent cryolite-based mixtures. The equation is based on a physical model which assumes that the conductivity is proportional to the number density of the effective electric charges in the melt. The various authors in the available literature show a great discrepancy in conductivity data of cryolite-based melts. The equation based on the physical model enables determination of which set of data is preferable. Special consideration in this respect is given to the influence of magnesium flouride and lithium flouride additions to the melt.

  1. Electrical conductivity of chondritic meteorites

    Science.gov (United States)

    Duba, AL; Didwall, E. M.; Burke, G. J.; Sonett, C. P.

    1987-01-01

    The electrical conductivity of samples of the Murchison and Allende carbonaceous chondrites is 4 to 6 orders of magnitude greater than rock forming minerals such as olivine for temperatures up to 700 C. The remarkably high electrical conductivity of these meteorites is attributed to carbon at the grain boundaries. Much of this carbon is produced by pyrolyzation of hydrocarbons at temperatures in excess of 150 C. As the temperature increases, light hydrocarbons are driven off and a carbon-rich residue or char migrates to the grain boundaries enhancing electrical conductivity. Assuming that carbon was present at the grain boundaries in the material which comprised the meteorite parent bodies, the electrical heating of such bodies was calculated as a function of body size and solar distance during a hypothetical T-Tauri phase of the sun. Input conductivity data for the meteorite parent body were the present carbonaceous chondrite values for temperatures up to 840 C and the electrical conductivity values for olivine above 840 C.

  2. Novel p-Type Conductive Semiconductor Nanocrystalline Film as the Back Electrode for High-Performance Thin Film Solar Cells.

    Science.gov (United States)

    Zhang, Ming-Jian; Lin, Qinxian; Yang, Xiaoyang; Mei, Zongwei; Liang, Jun; Lin, Yuan; Pan, Feng

    2016-02-10

    Thin film solar cells, due to the low cost, high efficiency, long-term stability, and consumer applications, have been widely applied for harvesting green energy. All of these thin film solar cells generally adopt various metal thin films as the back electrode, like Mo, Au, Ni, Ag, Al, graphite, and so forth. When they contact with p-type layer, it always produces a Schottky contact with a high contact potential barrier, which greatly affects the cell performance. In this work, we report for the first time to find an appropriate p-type conductive semiconductor film, digenite Cu9S5 nanocrystalline film, as the back electrode for CdTe solar cells as the model device. Its low sheet resistance (16.6 Ω/sq) could compare to that of the commercial TCO films (6-30 Ω/sq), like FTO, ITO, and AZO. Different from the traditonal metal back electrode, it produces a successive gradient-doping region by the controllable Cu diffusion, which greatly reduces the contact potential barrier. Remarkably, it achieved a comparable power conversion efficiency (PCE, 11.3%) with the traditional metal back electrode (Cu/Au thin films, 11.4%) in CdTe cells and a higher PCE (13.8%) with the help of the Au assistant film. We believe it could also act as the back electrode for other thin film solar cells (α-Si, CuInS2, CIGSe, CZTS, etc.), for their performance improvement.

  3. Effect of Substitutional Pb Doping on Bipolar and Lattice Thermal Conductivity in p-Type Bi0.48Sb1.52Te3

    Directory of Open Access Journals (Sweden)

    Hyun-sik Kim

    2017-07-01

    Full Text Available Cation substitutional doping is an effective approach to modifying the electronic and thermal transports in Bi2Te3-based thermoelectric alloys. Here we present a comprehensive analysis of the electrical and thermal conductivities of polycrystalline Pb-doped p-type bulk Bi0.48Sb1.52Te3. Pb doping significantly increased the electrical conductivity up to ~2700 S/cm at x = 0.02 in Bi0.48-xPbxSb1.52Te3 due to the increase in hole carrier concentration. Even though the total thermal conductivity increased as Pb was added, due to the increased hole carrier concentration, the thermal conductivity was reduced by 14–22% if the contribution of the increased hole carrier concentration was excluded. To further understand the origin of reduction in the thermal conductivity, we first estimated the contribution of bipolar conduction to thermal conductivity from a two-parabolic band model, which is an extension of the single parabolic band model. Thereafter, the contribution of additional point defect scattering caused by Pb substitution (Pb in the cation site was analyzed using the Debye–Callaway model. We found that Pb doping significantly suppressed both the bipolar thermal conduction and lattice thermal conductivity simultaneously, while the bipolar contribution to the total thermal conductivity reduction increased at high temperatures. At Pb doping of x = 0.02, the bipolar thermal conductivity decreased by ~30% from 0.47 W/mK to 0.33 W/mK at 480 K, which accounts for 70% of the total reduction.

  4. Electrical Conductivity in Transition Metals

    Science.gov (United States)

    Talbot, Christopher; Vickneson, Kishanda

    2013-01-01

    The aim of this "Science Note" is to describe how to test the electron-sea model to determine whether it accurately predicts relative electrical conductivity for first-row transition metals. In the electron-sea model, a metal crystal is viewed as a three-dimensional array of metal cations immersed in a sea of delocalised valence…

  5. Effect of doping concentration on the conductivity and optical properties of p-type ZnO thin films

    Energy Technology Data Exchange (ETDEWEB)

    Pathak, Trilok Kumar [Semiconductor Research Lab, Department of Physics, Gurukula Kangri University, Haridwar (India); Kumar, Vinod, E-mail: vinod.phy@gmail.com [Department of Physics, University of the Free State, Bloemfontein (South Africa); Swart, H.C., E-mail: swarthc@ufs.ac.za [Department of Physics, University of the Free State, Bloemfontein (South Africa); Purohit, L.P., E-mail: proflppurohitphys@gmail.com [Semiconductor Research Lab, Department of Physics, Gurukula Kangri University, Haridwar (India)

    2016-01-01

    Nitrogen doped ZnO (NZO) thin films were synthesized on glass substrates by the sol–gel and spin coating method. Zinc acetate dihydrates and ammonium acetate were used as precursors for zinc and nitrogen, respectively. X-ray diffraction study showed that the thin films have a hexagonal wurtzite structure corresponding (002) peak for undoped and doped ZnO thin films. The transmittance of the films was above 80% and the band gap of the film varies from 3.21±0.03 eV for undoped and doped ZnO. The minimum resistivity of NZO thin films was obtained as 0.473 Ω cm for the 4 at% of nitrogen (N) doping with a mobility of 1.995 cm{sup 2}/V s. The NZO thin films showed p-type conductivity at 2 and 3 at% of N doping. The AC conductivity measurements that were carried out in the frequency range 10 kHz to 0.1 MHz showed localized conduction in the NZO thin films. These highly transparent ZnO films can be used as a possible window layer in solar cells.

  6. A study of structural, electrical, and optical properties of p-type Zn-doped SnO2 films versus deposition and annealing temperature

    Science.gov (United States)

    Le, Tran; Phuc Dang, Huu; Luc, Quang Ho; Hieu Le, Van

    2017-04-01

    This study presents a detailed investigation of the structural, electrical, and optical properties of p-type Zn-doped SnO2 versus the deposition and annealing temperature. Using a direct-current (DC) magnetron sputtering method, p-type transparent conductive Zn-doped SnO2 (ZTO) films were deposited on quartz glass substrates. Zn dopants incorporated into the SnO2 host lattice formed the preferred dominant SnO2 (1 0 1) and (2 1 1) planes. X-ray photoelectron spectroscopy (XPS) was used for identifying the valence state of Zn in the ZTO film. The electrical property of ZTO films changed from n-type to p-type at the threshold temperature of 400 °C, and the films achieved extremely high conductivity at the optimum annealing temperature of 600 °C after annealing for 2 h. The best conductive property of the film was obtained on a 10 wt% ZnO-doped SnO2 target with a resistivity, hole concentration, and hole mobility of 0.22 Ω · cm, 7.19  ×  1018 cm-3, and 3.95 cm2 V-1 s-1, respectively. Besides, the average transmission of films was  >84%. The surface morphology of films was examined using scanning electron microscopy (SEM). Moreover, the acceptor level of Zn2+ was identified using photoluminescence spectra at room temperature. Current-voltage (I-V) characteristics revealed the behavior of a p-ZTO/n-Si heterojunction diode.

  7. p-Type Transparent Conducting Oxide/n-Type Semiconductor Heterojunctions for Efficient and Stable Solar Water Oxidation.

    Science.gov (United States)

    Chen, Le; Yang, Jinhui; Klaus, Shannon; Lee, Lyman J; Woods-Robinson, Rachel; Ma, Jie; Lum, Yanwei; Cooper, Jason K; Toma, Francesca M; Wang, Lin-Wang; Sharp, Ian D; Bell, Alexis T; Ager, Joel W

    2015-08-05

    Achieving stable operation of photoanodes used as components of solar water splitting devices is critical to realizing the promise of this renewable energy technology. It is shown that p-type transparent conducting oxides (p-TCOs) can function both as a selective hole contact and corrosion protection layer for photoanodes used in light-driven water oxidation. Using NiCo2O4 as the p-TCO and n-type Si as a prototypical light absorber, a rectifying heterojunction capable of light driven water oxidation was created. By placing the charge separating junction in the Si using a np(+) structure and by incorporating a highly active heterogeneous Ni-Fe oxygen evolution catalyst, efficient light-driven water oxidation can be achieved. In this structure, oxygen evolution under AM1.5G illumination occurs at 0.95 V vs RHE, and the current density at the reversible potential for water oxidation (1.23 V vs RHE) is >25 mA cm(-2). Stable operation was confirmed by observing a constant current density over 72 h and by sensitive measurements of corrosion products in the electrolyte. In situ Raman spectroscopy was employed to investigate structural transformation of NiCo2O4 during electrochemical oxidation. The interface between the light absorber and p-TCO is crucial to produce selective hole conduction to the surface under illumination. For example, annealing to produce more crystalline NiCo2O4 produces only small changes in its hole conductivity, while a thicker SiOx layer is formed at the n-Si/p-NiCo2O4 interface, greatly reducing the PEC performance. The generality of the p-TCO protection approach is demonstrated by multihour, stable, water oxidation with n-InP/p-NiCo2O4 heterojunction photoanodes.

  8. Electric Conductivity of Phosphorus Nanowires

    Institute of Scientific and Technical Information of China (English)

    ZHANG Jing-Xiang; LI Hui; ZHANG Xue-Qing; LIEW Kim-Meow

    2009-01-01

    We present the structures and electrical transport properties of nanowires made from different strands of phosphorus chains encapsulated in carbon nanotubes. Optimized by density function theory, our results indicate that the conductance spectra reveal an oscillation dependence on the size of wires. It can be seen from the density of states and current-voltage curves that the structure of nanowires affects their properties greatly. Among them,the DNA-like double-helical phosphorus nanowire exhibits the distinct characteristic of an approximately linear I - V relationship and has a higher conductance than others. The transport properties of phosphorus nanowires are highly correlated with their microstructures.

  9. Effect of Etching Time on Optical and Thermal Properties of p-Type Porous Silicon Prepared by Electrical Anodisation Method

    Directory of Open Access Journals (Sweden)

    Kasra Behzad

    2012-01-01

    Full Text Available The porous silicon (PSi layers were formed on p-type silicon (Si wafer. The six samples were anodised electrically with 30 mA/cm2 fixed current density for different etching times. The structural, optical, and thermal properties of porous silicon on silicon substrates were investigated by photoluminescence (PL, photoacoustic spectroscopy (PAS, and UV-Vis-NIR spectrophotometer. The thickness and porosity of the layers were measured using the gravimetric method. The band gap of the samples was measured through the photoluminescence (PL peak and absorption spectra, then they were compared. It shows that band gap value increases by raising the porosity. Photoacoustic spectroscopy (PAS was carried out for measuring the thermal diffusivity (TD of the samples.

  10. Growth and electrical properties of high-quality Mg-doped P-type A10.2Ga0.8N films

    Institute of Scientific and Technical Information of China (English)

    Zhou Xiaowei; Li Peixian; Xu Shengrui; Hao Yue

    2009-01-01

    The growth of high-performance Mg-doped p-type AlxGa1-xN(X=0.2)using metal-organic chemical vapor deposition is reported.The influence of growth conditions(growth temperature,magnesium flow,and thermal annealing temperature)on the electrical properties of Mg-doped p-type AlxGa1-xN(X=0.2)has been investigated.Using the optimized conditions,we obtained a minimum p-type resistivity of 0.71 Ωcm for p-type AlGaN with 20% Al fraction.

  11. Controlled p-type to n-type conductivity transformation in NiO thin films by ultraviolet-laser irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Gupta, Pranav; Dutta, Titas; Mal, Siddhartha; Narayan, Jagdish [Materials Science and Engineering, North Carolina State University, Raleigh, North Carolina 27606 (United States)

    2012-01-01

    We report the systematic changes in structural, electrical, and optical properties of NiO thin films on c-sapphire introduced by nanosecond ultraviolet excimer laser pulses. Epitaxial nature of as deposited NiO was determined by x-ray diffraction phi scans and transmission electron microscopy (TEM) and it was established that NiO film growth takes place with twin domains on sapphire where two types of domains have 60 deg. in-plane rotation with respect to each other about the [111] growth direction. We determined that at pulsed laser energy density of 0.275 J/cm{sup 2}, NiO films exhibited conversion from p-type semiconducting to n-type conductive behavior with three orders of magnitude decrease in resistivity, while maintaining its cubic crystal structure and good epitaxial relationship. Our TEM and electron-energy-loss spectroscopy studies conclusively ruled out the presence of any Ni clustering or precipitation due to the laser treatment. The laser-induced n-type carrier transport and conductivity enhancement were shown to be reversible through subsequent thermal annealing in oxygen. This change in conductivity behavior was correlated with the nonequilibrium concentration of laser induced Ni{sup 0}-like defect states.

  12. Lead free CH3NH3SnI3 perovskite thin-film with p-type semiconducting nature and metal-like conductivity

    Science.gov (United States)

    Iefanova, Anastasiia; Adhikari, Nirmal; Dubey, Ashish; Khatiwada, Devendra; Qiao, Qiquan

    2016-08-01

    Lead free CH3NH3SnI3 perovskite thin film was prepared by low temperature solution processing and characterized using current sensing atomic force microscopy (CS-AFM). Analysis of electrical, optical, and optoelectrical properties reveals unique p-type semiconducting nature and metal like conductivity of this material. CH3NH3SnI3 film also showed a strong absorption in visible and near infrared spectrum with absorption onset of 1.3 eV. X-ray Diffraction analysis and scanning electron microscopy (SEM) confirmed a structure of this compound and uniform film formation. The morphology, film uniformity, light harvesting and electrical properties strongly depend on preparation method and precursor solution. CH3NH3SnI3 films prepared based on dimethylformamide (DMF) showed higher crystallinity and light harvesting capability compared to the film based on combination of dimethyl sulfoxide (DMSO) with gamma-butyrolactone (GBL). Local photocurrent mapping analysis showed that CH3NH3SnI3 can be used as an active layer and have a potential to fabricate lead free photovoltaic devices.

  13. Lead free CH3NH3SnI3 perovskite thin-film with p-type semiconducting nature and metal-like conductivity

    Directory of Open Access Journals (Sweden)

    Anastasiia Iefanova

    2016-08-01

    Full Text Available Lead free CH3NH3SnI3 perovskite thin film was prepared by low temperature solution processing and characterized using current sensing atomic force microscopy (CS-AFM. Analysis of electrical, optical, and optoelectrical properties reveals unique p-type semiconducting nature and metal like conductivity of this material. CH3NH3SnI3 film also showed a strong absorption in visible and near infrared spectrum with absorption onset of 1.3 eV. X-ray Diffraction analysis and scanning electron microscopy (SEM confirmed a structure of this compound and uniform film formation. The morphology, film uniformity, light harvesting and electrical properties strongly depend on preparation method and precursor solution. CH3NH3SnI3 films prepared based on dimethylformamide (DMF showed higher crystallinity and light harvesting capability compared to the film based on combination of dimethyl sulfoxide (DMSO with gamma-butyrolactone (GBL. Local photocurrent mapping analysis showed that CH3NH3SnI3 can be used as an active layer and have a potential to fabricate lead free photovoltaic devices.

  14. Efros-Shklovskii type variable range hopping conduction and magnetoresistance in p-type CuGa3Te5

    Science.gov (United States)

    Wasim, S. M.; Essaleh, L.; Marín, G.; Rincón, C.; Amhil, S.; Galibert, J.

    2017-07-01

    Variable range hopping conduction of Efros and Shklovskii type when a Coulomb gap appears at the Fermi level due to repulsive interaction of the holes, is observed in two different temperature regions in the ordered defect compound CuGa3Te5. Since this type of electrical conduction appears over a very wide temperature range between 4 and 150 K, not reported before in elemental II-VI, and I-III-VI2 compound semiconductors, three different methods were employed to analyze the data to confirm this behavior. This is also supported from the study of the variation of impurity band hole mobility with temperature. Other hopping parameters are estimated. The logarithmic variation of the positive magnetoresistance at different temperatures in the two regions varies as B2 and B1/5 above and below the critical field Bc, that separates the low and high magnetic field regions. This is in complete agreement with the theory of Efros and Shklovskii. The temperature dependence of the corresponding slope as T- 3/2 and T- 3/5 is also consistent with the proposed models.

  15. Origin of p-type conductivity of Sb-doped ZnO nanorods and the local structure around Sb ions

    Energy Technology Data Exchange (ETDEWEB)

    Liang, J. K.; Su, H. L., E-mail: suhlnju@hotmail.com, E-mail: ycwu@hfut.edu.cn, E-mail: jcahuang@mail.ncku.edu.tw; Wu, Y. C., E-mail: suhlnju@hotmail.com, E-mail: ycwu@hfut.edu.cn, E-mail: jcahuang@mail.ncku.edu.tw [School of Materials Science and Engineering and Anhui Provincial Key Laboratory of Advanced Functional Materials and Devices, Hefei University of Technology, Hefei 230009, Anhui (China); Chuang, P. Y.; Kuo, C. L.; Huang, S. Y. [Department of Physics, National Cheng Kung University, Tainan 701, Taiwan (China); Chan, T. S. [National Synchrotron Radiation Research Center, Hsinchu 300, Taiwan (China); Huang, J. C. A., E-mail: suhlnju@hotmail.com, E-mail: ycwu@hfut.edu.cn, E-mail: jcahuang@mail.ncku.edu.tw [Department of Physics, National Cheng Kung University, Tainan 701, Taiwan (China); Advanced Optoelectronic Technology Center and Center for Micro/Nano Science and Technology, National Cheng Kung University, Tainan 701, Taiwan (China); Taiwan Consortium of Emergent Crystalline Materials, Ministry of Science and Technology, Taipei 106, Taiwan (China)

    2015-05-25

    To probe the origin of p-type conductivity in Sb-doped ZnO, a careful and detailed synchrotron radiation study was performed. The extended X-ray absorption fine structure and X-ray photoelectron spectroscopy investigations provided the evidence for the formation of the complex defects comprising substitution Sb ions at Zn sites (Sb{sub Zn}) and Zn vacancies within the Sb-doped ZnO lattice. Such complex defects result in the increases of Sb-O coordination number and the Sb valence and thereby lead to the p-type conductivity of Sb-doped ZnO. The back-gate field-effect-transistors based on single nanorod of Sb-doped ZnO were constructed, and the stable p-type conduction behavior was confirmed.

  16. Electrical Conductivity of the Carbon Fiber Conductive Concrete

    Institute of Scientific and Technical Information of China (English)

    HOU Zuofu; LI Zhuoqiu; WANG Jianjun

    2007-01-01

    This paper discussed two methods to enhance the electrical conductivity of the carbon fiber(CF) electrically conductive concrete. The increase in the content of stone and the amount of water used to dissolve the methylcellulose and marinate the carbon fibers can decrease the electrical resistivity of the electrically conductive concrete effectively. Based on these two methods, the minimum CF content of the CF electrically conductive concrete for deicing or snow-melting application and the optimal ratio of the amount of water to dissolve the methylcellulose and marinate the carbon fibers were obtained.

  17. Corrosion Protection of Electrically Conductive Surfaces

    OpenAIRE

    Jian Song; Liangliang Wang; Andre Zibart; Christian Koch

    2012-01-01

    The basic function of the electrically conductive surface of electrical contacts is electrical conduction. The electrical conductivity of contact materials can be largely reduced by corrosion and in order to avoid corrosion, protective coatings must be used. Another phenomenon that leads to increasing contact resistance is fretting corrosion. Fretting corrosion is the degradation mechanism of surface material, which causes increasing contact resistance. Fretting corrosion occurs when there is...

  18. Effective electrical conductivity of a nonuniform plasma

    Science.gov (United States)

    Nichols, L. D.

    1975-01-01

    A simple nonuniformity model for calculating effective electrical conductivity and Hall parameter is proposed. The model shows that the effective conductivity can be significantly reduced by nonuniformities in the Hall parameter, even if the local conductivity is uniform.

  19. Electrical Conductivity of Ferritin Proteins by Conductive AFM

    Science.gov (United States)

    Xu, Degao; Watt, Gerald D.; Harb, John N.; Davis, Robert C.

    2005-01-01

    Electrical conductivity measurements were performed on single apoferritin and holoferritin molecules by conductive atomic force microscopy. Conductivity of self-assembled monolayer films of ferritin molecules on gold surfaces was also measured. Holoferritin was 5-25 times more conductive than apoferritin, indicating that for holoferritin most electron-transfer goes through the ferrihydrite core. With 1 V applied, the average electrical currents through single holoferritin and apoferritin molecules were 2.6 PA and 0.19 PA, respectively.

  20. Corrosion Protection of Electrically Conductive Surfaces

    Directory of Open Access Journals (Sweden)

    Jian Song

    2012-11-01

    Full Text Available The basic function of the electrically conductive surface of electrical contacts is electrical conduction. The electrical conductivity of contact materials can be largely reduced by corrosion and in order to avoid corrosion, protective coatings must be used. Another phenomenon that leads to increasing contact resistance is fretting corrosion. Fretting corrosion is the degradation mechanism of surface material, which causes increasing contact resistance. Fretting corrosion occurs when there is a relative movement between electrical contacts with surfaces of ignoble metal. Avoiding fretting corrosion is therefore extremely challenging in electronic devices with pluggable electrical connections. Gold is one of the most commonly used noble plating materials for high performance electrical contacts because of its high corrosion resistance and its good and stable electrical behavior. The authors have investigated different ways to minimize the consumption of gold for electrical contacts and to improve the performance of gold plating. Other plating materials often used for corrosion protection of electrically conductive surfaces are tin, nickel, silver and palladium. This paper will deal with properties and new research results of different plating materials in addition to other means used for corrosion protection of electrically conductive surfaces and the testing of corrosion resistance of electrically conductive surfaces.

  1. Electrical Conductivity of Aluminium Alloy Foams

    Institute of Scientific and Technical Information of China (English)

    凤仪; 郑海务; 朱震刚; 祖方遒

    2002-01-01

    Closed-cell aluminium alloy foams were produced using the powder metallurgical technique. The effect of porosityand cell diameter on the electrical conductivity of foams was investigated and the results were compared with anumber of models. It was found that the percolation theory can be successfully applied to describe the dependenceof the electrical conductivity of aluminium alloy foams on the relative density. The cell diameter has a negligibleeffect on the electrical conductivity of foams.

  2. Electrical band-gap narrowing in n- and p-type heavily doped silicon at 300 K

    Science.gov (United States)

    Van Cong, H.; Brunet, S.

    1986-09-01

    Based on previous results band-gap narrowing in heavily doped silicon at 300 K is investigated and expressed in terms of impurity size-and-doping effects. The results obtained for n- and p-type heavily doped silicon are compared with other theories and experiments.

  3. The low resistive and transparent Al-doped SnO{sub 2} films: p-type conductivity, nanostructures and photoluminescence

    Energy Technology Data Exchange (ETDEWEB)

    Benouis, C.E. [Department of Material Technology, Physics Faculty, USTOMB University, BP1505 Oran (Algeria); Benhaliliba, M., E-mail: mbenhaliliba@gmail.com [Department of Material Technology, Physics Faculty, USTOMB University, BP1505 Oran (Algeria); Mouffak, Z. [Department of Electrical and Computer Engineering California State University, Fresno, CA (United States); Avila-Garcia, A. [Cinvestav-IPN, Dept. Ingeniería Eléctrica-SEES, Apdo. Postal 14-740, 07000 México, D.F. (Mexico); Tiburcio-Silver, A. [ITT-DIE, Apdo, Postal 20, Metepec 3, 52176 Estado de Mexico (Mexico); Ortega Lopez, M.; Romano Trujillo, R. [Centro de Investigación en Dispositivos Semiconductores, Instituto de Ciencias-BUAP, 14 Sur y Av. San Claudio, C.U. Puebla, Pue. (Mexico); Ocak, Y.S. [Dicle University, Education Faculty, Science Department, 21280 Diyarbakir (Turkey)

    2014-08-01

    Highlights: • Low resistive and high transparency Al doped SnO{sub 2} films. • Films are deposited onto ITO substrate by spray pyrolysis. • Nanostructured films are revealed. • p-Type conductivity is exhibited. • Photoluminescence of films is studied. - Abstract: In this work, we study the crystalline structure, surface morphology, transmittance, optical bandgap and n/p type inversion of tin oxide (SnO{sub 2}). The Nanostructured films of Al-doped SnO{sub 2} were successfully produced onto ITO-coated glass substrates via the spray pyrolysis method at a deposition temperature of 300 °C. A (1 0 1) and (2 1 1)-oriented tetragonal crystal structure was confirmed by X-ray patterns; and grain sizes varied within the range 8−42 nm. The films were polycrystalline, showing a high transparency in the visible (VIS) and infrared (IR) spectra. The optical bandgap was estimated to be around 3.4 eV. The atomic force microscopy (AFM) analysis showed the nanostructures consisting of nanotips, nanopatches, nanopits and nanobubbles. The samples exhibited high conductivity that ranged from 0.55 to 10{sup 4} (S/cm) at ambient and showed an inversion from n to p-type as well as a degenerate semiconductor characters with a bulk concentration reaching 1.7 x 10{sup 19} cm{sup −3}. The photoluminescence measurements reveal the detection of violet, green and yellow emissions.

  4. The electrical conductivity and surface conduction of consolidated rock cores.

    Science.gov (United States)

    Alkafeef, Saad F; Alajmi, Abdullah F

    2007-05-15

    A fully computerized high-pressure and high-temperature core holder device is simultaneously used to determine the electrical conductivity, zeta potential, and surface conductivity of consolidated rock cores in aqueous and nonaqueous systems. The total electrical conductivity of rock cores was determined by coupling streaming current and potential measurements. This shows that neglecting the surface conductivity Ksigma is crucial to converting the streaming potential into zeta potentials. It is observed that plots of the core total conductivity as a function of the electrolyte conductivity KL exhibit two behaviors. At low ionic strength, the core conductivity clearly depends on the contribution of surface conductivity behind the slip plane, whereas at higher ionic strength, the magnitude of the surface conductivity becomes negligible. The electrical conductivity of rock cores was found to be in good agreement with the O'Brien theory and the Briggs method. The contribution of the stagnant layer to the surface conductivity in nonaqueous systems has been shown to be significant. This shows that the stagnant layer displays significantly different behavior in different nonaqueous systems, depending on the core porosity and the double-layer overlap. The results indicate that the application of electrokinetics in petroleum reservoirs can provide important insights into reservoir fluid flow characterization.

  5. Electrically conducting polymers for aerospace applications

    Science.gov (United States)

    Meador, Mary Ann B.; Gaier, James R.; Good, Brian S.; Sharp, G. R.; Meador, Michael A.

    1991-01-01

    Current research on electrically conducting polymers from 1974 to the present is reviewed focusing on the development of materials for aeronautic and space applications. Problems discussed include extended pi-systems, pyrolytic polymers, charge-transfer systems, conductive matrix resins for composite materials, and prospects for the use of conducting polymers in space photovoltaics.

  6. [Myocardial infarction after conduction electrical weapon shock].

    Science.gov (United States)

    Ben Ahmed, H; Bouzouita, K; Selmi, K; Chelli, M; Mokaddem, A; Ben Ameur, Y; Boujnah, M R

    2013-04-01

    Controversy persists over the safety of conducted electrical weapons, which are increasingly used by law enforcement agencies around the world. We report a case of 33-year-old man who had an acute inferior myocardial infarction after he was shot in the chest with an electrical weapon. Copyright © 2012 Elsevier Masson SAS. All rights reserved.

  7. Theory of electrical conductivities of ferrogels

    CERN Document Server

    Huang, J P

    2004-01-01

    Conductive organic polymers can be formulated with polymers that incorporate fine dispersed metallic particles. In this work, we present a general model for ferrogels which are chemically cross-linked polymer networks swollen with a ferrofluid. Our aim is to study the effect of the shape and/or material (conductivity) anisotropy on the effective electrical conductivity of the ferrogel in the presence of an external magnetic field. Our theory can reproduce the known results, and provides a link between the particle property and orientation distribution and the effective electrical conductivity. To this end, we find that material (conductivity) anisotropies are more important to yield a high effective electrical conductivity than shape anisotropies, while magnetic fields can offer a correction.

  8. Thermodynamic parameters of elasticity and electrical conductivity ...

    African Journals Online (AJOL)

    Thermodynamic parameters of elasticity and electrical conductivity of reinforced natural rubber (nr) vulca nizates. ... Bulletin of the Chemical Society of Ethiopia ... The thermodynamic parameters (change in free energy of elasticity, DGe; ...

  9. Electrical Resistance Tomography of Conductive Thin Films

    CERN Document Server

    Cultrera, Alessandro

    2016-01-01

    The Electrical Resistance Tomography (ERT) technique is applied to the measurement of sheet conductance maps of both uniform and patterned conductive thin films. Images of the sheet conductance spatial distribution, and local conductivity values are obtained. Test samples are tin oxide films on glass substrates, with electrical contacts on the sample boundary, some samples are deliberately patterned in order to induce null conductivity zones of known geometry while others contain higher conductivity inclusions. Four-terminal resistance measurements among the contacts are performed with a scanning setup. The ERT reconstruction is performed by a numerical algorithm based on the total variation regularization and the L-curve method. ERT correctly images the sheet conductance spatial distribution of the samples. The reconstructed conductance values are in good quantitative agreement with independent measurements performed with the van der Pauw and the four-point probe methods.

  10. Contact-independent electrical conductance measurement

    Energy Technology Data Exchange (ETDEWEB)

    Mentzel, Tamar S.; MacLean, Kenneth; Kastner, Marc A.; Ray, Nirat

    2017-01-24

    Electrical conductance measurement system including a one-dimensional semiconducting channel, with electrical conductance sensitive to electrostatic fluctuations, in a circuit for measuring channel electrical current. An electrically-conductive element is disposed at a location at which the element is capacitively coupled to the channel; a midpoint of the element aligned with about a midpoint of the channel, and connected to first and second electrically-conductive contact pads that are together in a circuit connected to apply a changing voltage across the element. The electrically-conductive contact pads are laterally spaced from the midpoint of the element by a distance of at least about three times a screening length of the element, given in SI units as (K.di-elect cons..sub.0/e.sup.2D(E.sub.F)).sup.1/2, where K is the static dielectric constant, .di-elect cons..sub.0 is the permittivity of free space, e is electron charge, and D(E.sub.F) is the density of states at the Fermi energy for the element.

  11. Chemical Bath Deposition of p-Type Transparent, Highly Conducting (CuS)x:(ZnS)1-x Nanocomposite Thin Films and Fabrication of Si Heterojunction Solar Cells.

    Science.gov (United States)

    Xu, Xiaojie; Bullock, James; Schelhas, Laura T; Stutz, Elias Z; Fonseca, Jose J; Hettick, Mark; Pool, Vanessa L; Tai, Kong Fai; Toney, Michael F; Fang, Xiaosheng; Javey, Ali; Wong, Lydia Helena; Ager, Joel W

    2016-03-09

    P-type transparent conducting films of nanocrystalline (CuS)x:(ZnS)1-x were synthesized by facile and low-cost chemical bath deposition. Wide angle X-ray scattering (WAXS) and high resolution transmission electron microscopy (HRTEM) were used to evaluate the nanocomposite structure, which consists of sub-5 nm crystallites of sphalerite ZnS and covellite CuS. Film transparency can be controlled by tuning the size of the nanocrystallites, which is achieved by adjusting the concentration of the complexing agent during growth; optimal films have optical transmission above 70% in the visible range of the spectrum. The hole conductivity increases with the fraction of the covellite phase and can be as high as 1000 S cm(-1), which is higher than most reported p-type transparent materials and approaches that of n-type transparent materials such as indium tin oxide (ITO) and aluminum doped zinc oxide (AZO) synthesized at a similar temperature. Heterojunction p-(CuS)x:(ZnS)1-x/n-Si solar cells were fabricated with the nanocomposite film serving as a hole-selective contact. Under 1 sun illumination, an open circuit voltage of 535 mV was observed. This value compares favorably to other emerging heterojunction Si solar cells which use a low temperature process to fabricate the contact, such as single-walled carbon nanotube/Si (370-530 mV) and graphene/Si (360-552 mV).

  12. Increased p-type conductivity in GaN{sub x}Sb{sub 1−x}, experimental and theoretical aspects

    Energy Technology Data Exchange (ETDEWEB)

    Segercrantz, N., E-mail: natalie.segercrantz@aalto.fi; Makkonen, I.; Slotte, J.; Kujala, J.; Tuomisto, F. [Department of Applied Physics, Aalto University, P.O. Box 14100, FIN-00076 Aalto Espoo (Finland); Veal, T. D. [Department of Physics and Stephenson Institute for Renewable Energy, University of Liverpool, Liverpool L69 7ZF (United Kingdom); Ashwin, M. J. [Department of Chemistry, University of Warwick, Coventry CV4 7AL (United Kingdom)

    2015-08-28

    The large increase in the p-type conductivity observed when nitrogen is added to GaSb has been studied using positron annihilation spectroscopy and ab initio calculations. Doppler broadening measurements have been conducted on samples of GaN{sub x}Sb{sub 1−x} layers grown by molecular beam epitaxy, and the results have been compared with calculated first-principle results corresponding to different defect structures. From the calculated data, binding energies for nitrogen-related defects have also been estimated. Based on the results, the increase in residual hole concentration is explained by an increase in the fraction of negative acceptor-type defects in the material. As the band gap decreases with increasing N concentration, the ionization levels of the defects move closer to the valence band. Ga vacancy-type defects are found to act as positron trapping defects in the material, and the ratio of Ga vacancy-type defects to Ga antisites is found to be higher than that of the p-type bulk GaSb substrate. Beside Ga vacancies, the calculated results imply that complexes of a Ga vacancy and nitrogen could be present in the material.

  13. Direct ultrasensitive electrical detection of prostate cancer biomarkers with CMOS-compatible n- and p-type silicon nanowire sensor arrays

    Science.gov (United States)

    Gao, Anran; Lu, Na; Dai, Pengfei; Fan, Chunhai; Wang, Yuelin; Li, Tie

    2014-10-01

    Sensitive and quantitative analysis of proteins is central to disease diagnosis, drug screening, and proteomic studies. Here, a label-free, real-time, simultaneous and ultrasensitive prostate-specific antigen (PSA) sensor was developed using CMOS-compatible silicon nanowire field effect transistors (SiNW FET). Highly responsive n- and p-type SiNW arrays were fabricated and integrated on a single chip with a complementary metal oxide semiconductor (CMOS) compatible anisotropic self-stop etching technique which eliminated the need for a hybrid method. The incorporated n- and p-type nanowires revealed complementary electrical response upon PSA binding, providing a unique means of internal control for sensing signal verification. The highly selective, simultaneous and multiplexed detection of PSA marker at attomolar concentrations, a level useful for clinical diagnosis of prostate cancer, was demonstrated. The detection ability was corroborated to be effective by comparing the detection results at different pH values. Furthermore, the real-time measurement was also carried out in a clinically relevant sample of blood serum, indicating the practicable development of rapid, robust, high-performance, and low-cost diagnostic systems.Sensitive and quantitative analysis of proteins is central to disease diagnosis, drug screening, and proteomic studies. Here, a label-free, real-time, simultaneous and ultrasensitive prostate-specific antigen (PSA) sensor was developed using CMOS-compatible silicon nanowire field effect transistors (SiNW FET). Highly responsive n- and p-type SiNW arrays were fabricated and integrated on a single chip with a complementary metal oxide semiconductor (CMOS) compatible anisotropic self-stop etching technique which eliminated the need for a hybrid method. The incorporated n- and p-type nanowires revealed complementary electrical response upon PSA binding, providing a unique means of internal control for sensing signal verification. The highly

  14. Electrically conductive and thermally conductive materials for electronic packaging

    Science.gov (United States)

    Liu, Zongrong

    The aim of this dissertation is to develop electrically or thermally conductive materials that are needed for electronic packaging and microelectronic cooling. These materials are in the form of coatings and are made from pastes. The research work encompasses paste formulation, studying the process of converting a paste to a conductive material, relating the processing conditions to the structure and performance, and evaluating performance attributes that are relevant to the application of these conductive materials. The research has resulted in new information that is valuable to the microelectronic industry. Work on electrically conductive materials emphasizes the development of electrical interconnection materials in the form of air-firable glass-free silver-based electrically conductive thick films, which use the Ti-Al alloy as the binder and are in contrast to conventional films that use glass as the binder. The air-firability, as enabled by minor additions of tin and zinc to the paste, is in contrast to previous glass-free films that are not firable. The recommended firing condition is 930°C in air. The organic vehicle in the paste comprises ethyl cellulose, which undergoes thermal decomposition during burnout of the paste. The ethyl cellulose is dissolved in ether, which facilitates the burnout. Excessive ethyl cellulose hinders the burnout. A higher heating rate results in more residue after burnout. The presence of silver particles facilitates drying and burnout. Firing in air gives lower resistivity than firing in oxygen. Firing in argon gives poor films. Compared to conventional films that use glass as the binder, these films, when appropriately fired, exhibit lower electrical resistivity (2.5 x 10-6 O.cm) and higher scratch resistance. Work on thermally conductive materials addresses thermal interface materials, which are materials placed at the interface between a heat sink and a heat source for the purpose of improving the thermal contact. Heat

  15. Electrical conductivity of Cu-Li alloys

    Institute of Scientific and Technical Information of China (English)

    朱达川; 宋明昭; 陈家钊; 涂铭旌; 潘海滨

    2004-01-01

    The electrical conductivity of Cu-Li alloys was studied. And the distribution of electrons near Fermi surface was detected by synchrotron radiation instrument. The results show that the electrical conductivity of Cu-Li alloys decreases from 5. 22 × 10-9 S/m to 3. 69 × 10-9 S/m with the increase of Li content. Li can decrease the oxygen, sulfur and other impurities content in commercial Cu, but Li dissolved in Cu lattice leads to distortion of Cu lattice from 0. 005 %-0. 050 %, affects the valence band of Cu, increases the binding energy of surface electron, and decreases the electron density of Fermi surface simultaneously. So the electrical conductivity decreases gradually with the increase of Li content.

  16. Electrical conduction in transition-metal salts

    Energy Technology Data Exchange (ETDEWEB)

    Grado-Caffaro, M.A.; Grado-Caffaro, M. [Scientific Consultants, Madrid (Spain)

    2016-08-01

    We predict that a given transition-metal salt as, for example, a K{sub 2}CuCl{sub 4}.2H{sub 2}O-type compound, can behave as an electrical conductor in the paramagnetic case. In fact, we determine the electrical conductance in a salt of this type. This conductance is found to be quantised in agreement with previous well-known results. Related mathematical expressions in the context of superexchange interaction are obtained. In addition, we determine the corresponding (macroscopically viewed) current density and the associated electron wave functions.

  17. Electrical properties of n-type GaSb substrates and p-type GaSb buffer layers for InAs/InGaSb superlattice infrared detectors

    Energy Technology Data Exchange (ETDEWEB)

    Mitchel, W. C., E-mail: William.Mitchel.1@us.af.mil; Haugan, H. J.; Mou, Shin; Brown, G. J. [Air Force Research Laboratory, Materials & Manufacturing Directorate, Wright-Patterson Air Force Base, Ohio 45433 (United States); Elhamri, S.; Berney, R. [University of Dayton, Department of Physics, Dayton, Ohio 45469 (United States)

    2015-09-15

    Lightly doped n-type GaSb substrates with p-type GaSb buffer layers are the preferred templates for growth of InAs/InGaSb superlattices used in infrared detector applications because of relatively high infrared transmission and a close lattice match to the superlattices. We report here temperature dependent resistivity and Hall effect measurements of bare substrates and substrate-p-type buffer layer structures grown by molecular beam epitaxy. Multicarrier analysis of the resistivity and Hall coefficient data demonstrate that high temperature transport in the substrates is due to conduction in both the high mobility zone center Γ band and the low mobility off-center L band. High overall mobility values indicate the absence of close compensation and that improved infrared and transport properties were achieved by a reduction in intrinsic acceptor concentration. Standard transport measurements of the undoped buffer layers show p-type conduction up to 300 K indicating electrical isolation of the buffer layer from the lightly n-type GaSb substrate. However, the highest temperature data indicate the early stages of the expected p to n type conversion which leads to apparent anomalously high carrier concentrations and lower than expected mobilities. Data at 77 K indicate very high quality buffer layers.

  18. Electrical properties of n-type GaSb substrates and p-type GaSb buffer layers for InAs/InGaSb superlattice infrared detectors

    Directory of Open Access Journals (Sweden)

    W. C. Mitchel

    2015-09-01

    Full Text Available Lightly doped n-type GaSb substrates with p-type GaSb buffer layers are the preferred templates for growth of InAs/InGaSb superlattices used in infrared detector applications because of relatively high infrared transmission and a close lattice match to the superlattices. We report here temperature dependent resistivity and Hall effect measurements of bare substrates and substrate-p-type buffer layer structures grown by molecular beam epitaxy. Multicarrier analysis of the resistivity and Hall coefficient data demonstrate that high temperature transport in the substrates is due to conduction in both the high mobility zone center Γ band and the low mobility off-center L band. High overall mobility values indicate the absence of close compensation and that improved infrared and transport properties were achieved by a reduction in intrinsic acceptor concentration. Standard transport measurements of the undoped buffer layers show p-type conduction up to 300 K indicating electrical isolation of the buffer layer from the lightly n-type GaSb substrate. However, the highest temperature data indicate the early stages of the expected p to n type conversion which leads to apparent anomalously high carrier concentrations and lower than expected mobilities. Data at 77 K indicate very high quality buffer layers.

  19. Electrical conductivity of individual polypyrrole microtube

    Institute of Scientific and Technical Information of China (English)

    Long Yun-Ze; Xiao Hong-Mei; Chen Zhao-Jia; Wan Mei-Xiang; Jin Ai-Zi; Gu Chang-Zhi

    2004-01-01

    Conducting microtubes (0.4-0.5μm in outer diameter) made of polypyrrole (PPy) doped with p-toluene sulfonic acid (PTSA) were synthesized by a self-assembly method. We report the electrical conductivity of an individual PPy microtube, on which a pair of platinum micro-leads was fabricated bv focused ion beam deposition. The measured room-temperature conductivity of the individual PPy microtube was 0.29S/cm, which is comparable to that of templatesynthesized PPy micro/nanotubes. The temperature dependence of conductivity of the individual microtube follows the three-dimensional variable-range hopping (3D VRH) model.

  20. Poole-Frenkel effect on electrical characterization of Al-doped ZnO films deposited on p-type GaN

    Energy Technology Data Exchange (ETDEWEB)

    Huang, Bohr-Ran [Graduate Institute of Electro-Optical Engineering and Department of Electronic Engineering, National Taiwan University of Science and Technology, Taipei 106, Taiwan (China); Liao, Chung-Chi [Department of Electronic Engineering, National Taiwan University of Science and Technology, Taipei 106, Taiwan (China); Ke, Wen-Cheng, E-mail: wcke@saturn.yzu.edu.tw; Chang, Yuan-Ching; Huang, Hao-Ping [Department of Mechanical Engineering, Yuan Ze University, Chung-Li 320, Taiwan (China); Chen, Nai-Chuan [Institute of Electro-Optical Engineering and Department of Electronic Engineering, Chang Gung University, Tao-Yuan 333, Taiwan (China)

    2014-03-21

    This paper presents the electrical properties of Al-doped ZnO (AZO) films directly grown on two types of p-type GaN thin films. The low-pressure p-GaN thin films (LP-p-GaN) exhibited structural properties of high-density edge-type threading dislocations (TDs) and compensated defects (i.e., nitrogen vacancy). Compared with high-pressure p-GaN thin films (HP-p-GaN), X-ray photoemission spectroscopy of Ga 3d core levels indicated that the surface Fermi-level shifted toward the higher binding-energy side by approximately 0.7 eV. The high-density edge-type TDs and compensated defects enabled surface Fermi-level shifting above the intrinsic Fermi-level, causing the surface of LP-p-GaN thin films to invert to n-type semiconductor. A highly nonlinear increase in leakage current regarding reverse-bias voltage was observed for AZO/LP-p-GaN. The theoretical fits for the reverse-bias voltage region indicated that the field-assisted thermal ionization of carriers from defect associated traps, which is known as the Poole-Frenkel effect, dominated the I-V behavior of AZO/LP-p-GaN. The fitting result estimated the trap energy level at 0.62 eV below the conduction band edge. In addition, the optical band gap increased from 3.50 eV for as-deposited AZO films to 3.62 eV for 300 °C annealed AZO films because of the increased carrier concentration. The increasing Fermi-level of the 300 °C annealed AZO films enabled the carrier transport to move across the interface into the LP-p-GaN thin films without any thermal activated energy. Thus, the Ohmic behavior of AZO contact can be achieved directly on the low-pressure p-GaN films at room temperature.

  1. Origin of the n -type and p -type conductivity of MoS 2 monolayers on a SiO 2 substrate

    KAUST Repository

    Dolui, Kapildeb

    2013-04-02

    Ab initio density functional theory calculations are performed to study the electronic properties of a MoS2 monolayer deposited over a SiO 2 substrate in the presence of interface impurities and defects. When MoS2 is placed on a defect-free substrate, the oxide plays an insignificant role since the conduction band top and the valence band minimum of MoS2 are located approximately in the middle of the SiO2 band gap. However, if Na impurities and O dangling bonds are introduced at the SiO2 surface, these lead to localized states, which modulate the conductivity of the MoS2 monolayer from n- to p-type. Our results show that the conductive properties of MoS2 deposited on SiO 2 are mainly determined by the detailed structure of the MoS 2/SiO2 interface, and suggest that doping the substrate can represent a viable strategy for engineering MoS2-based devices. © 2013 American Physical Society.

  2. Hopping conduction in p-type MoS{sub 2} near the critical regime of the metal-insulator transition

    Energy Technology Data Exchange (ETDEWEB)

    Park, Tae-Eon; Jang, Chaun, E-mail: cujang@kist.re.kr, E-mail: presto@kist.re.kr [Center for Spintronics, Korea Institute of Science and Technology, Seoul 136-791 (Korea, Republic of); Suh, Joonki; Wu, Junqiao [Department of Materials Science and Engineering, University of California, Berkeley, California 94720 (United States); Seo, Dongjea [Center for Spintronics, Korea Institute of Science and Technology, Seoul 136-791 (Korea, Republic of); Department of Materials Science and Engineering, Yonsei University, Seoul 120-749 (Korea, Republic of); Park, Joonsuk [Department of Materials Science and Engineering, Stanford University, Stanford, California 94305 (United States); Lin, Der-Yuh [Department of Electronics Engineering, National Changhua University of Education, Changhua 50007, Taiwan (China); Huang, Ying-Sheng [Department of Electronics Engineering, National Taiwan University of Science and Technology, Taipei 10607, Taiwan (China); Choi, Heon-Jin [Department of Materials Science and Engineering, Yonsei University, Seoul 120-749 (Korea, Republic of); Chang, Joonyeon, E-mail: cujang@kist.re.kr, E-mail: presto@kist.re.kr [Center for Spintronics, Korea Institute of Science and Technology, Seoul 136-791 (Korea, Republic of); Department of Nanomaterials Science and Engineering, Korea University of Science and Technology, Daejeon 305-350 (Korea, Republic of)

    2015-11-30

    We report on temperature-dependent charge and magneto transport of chemically doped MoS{sub 2}, p-type molybdenum disulfide degenerately doped with niobium (MoS{sub 2}:Nb). The temperature dependence of the electrical resistivity is characterized by a power law, ρ(T) ∼ T{sup −0.25}, which indicates that the system resides within the critical regime of the metal-insulator (M-I) transition. By applying high magnetic field (∼7 T), we observed a 20% increase in the resistivity at 2 K. The positive magnetoresistance shows that charge transport in this system is governed by the Mott-like three-dimensional variable range hopping (VRH) at low temperatures. According to relationship between magnetic-field and temperature dependencies of VRH resistivity, we extracted a characteristic localization length of 19.8 nm for MoS{sub 2}:Nb on the insulating side of the M-I transition.

  3. Pulsed electrical discharge in conductive solution

    Science.gov (United States)

    Panov, V. A.; Vasilyak, L. M.; Vetchinin, S. P.; Pecherkin, V. Ya; Son, E. E.

    2016-09-01

    Electrical discharge in a conductive solution of isopropyl alcohol in tap water (330 μ S cm-1) has been studied experimentally applying high voltage millisecond pulses (rise time  ˜0.4 μ \\text{s} , amplitude up to 15 kV, positive polarity) to a pin anode electrode. Dynamic current-voltage characteristics synchronized with high-speed images of the discharge were studied. The discharge was found to develop from high electric field region in the anode vicinity where initial conductive current with density  ˜100 A cm-2 results in fast heating and massive nucleation of vapor bubbles. Discharges in nucleated bubbles then produce a highly conductive plasma region and facilitate overheating instability development with subsequent formation of a thermally ionized plasma channel. The measured plasma channel propagation speed was 3-15 m s-1. A proposed thermal model of plasma channel development explains the low observed plasma channel propagation speed.

  4. Electrical conduction of a XLPE nanocomposite

    Science.gov (United States)

    Park, Yong-Jun; Sim, Jae-Yong; Lim, Kee-Joe; Nam, Jin-Ho; Park, Wan-Gi

    2014-07-01

    The resistivity, breakdown strength, and formation of space charges are very important factors for insulation design of HVDC cable. It is known that a nano-sized metal-oxide inorganic filler reduces the formation of space charges in the polymer nanocomposite. Electrical conduction of cross-linked polyethylene(XLPE) nanocomposite insulating material is investigated in this paper. The conduction currents of two kinds of XLPE nanocomposites and XLPE without nano-filler were measured at temperature of 303 ~ 363 K under the applied electric fields of 10 ~ 50 kV/mm. The current of the nanocomposite specimen is smaller than that of XLPE specimen without nano-filler. The conduction mechanism may be explained in terms of Schottky emission and multi-core model.

  5. Nanocomposite of p-type conductive polymer/functionalized graphene oxide nanosheets as novel and hybrid electrodes for highly capacitive pseudocapacitors.

    Science.gov (United States)

    Ehsani, A; Mohammad Shiri, H; Kowsari, E; Safari, R; Torabian, J; Kazemi, S

    2016-09-15

    An effective approach for increasing the life cycle of poly ortho aminophenol (POAP) as a p-type conductive polymers is combining conventional conductive polymers and nanomaterials to fabricate hybrid electrodes. In this paper, functionalized graphene oxide (FGO) has first been synthesized using a chemical approach. Hybrid POAP/FGO films have then been fabricated by POAP electropolymerization in the presence of FGO nanoparticles as active electrodes for electrochemical supercapacitors. Based on the atomic scale study results, it seems that H3PO4(-) oxygen atoms and terminal pyridine ring nitrogen atoms play a crucial role in the intramolecular charge and energy transfer in the FGO molecular systems. Theoretical studies, surface and electrochemical analyses have been used for characterization of POAP/FGO composite films. Different electrochemical methods including galvanostatic charge discharge experiments, cyclic voltammetry and electrochemical impedance spectroscopy have been applied to study the system performance. This work introduces new nanocomposite materials for electrochemical redox capacitors with such advantages as the ease of synthesis, high active surface area and stability in an aqueous electrolyte.

  6. Promoting oxygen vacancy formation and p-type conductivity in SrTiO3via alkali metal doping: a first principles study.

    Science.gov (United States)

    Triggiani, Leonardo; Muñoz-García, Ana B; Agostiano, Angela; Pavone, Michele

    2016-10-19

    Strontium titanate (SrTiO3, STO) is a prototypical perovskite oxide, widely exploited in many technological applications, from catalysis to energy conversion devices. In the context of solid-oxide fuel cells, STO has been recently applied as an epitaxial substrate for nano-sized layers of mixed ion-electron conductive catalysts with enhanced electrochemical performances. To extend the applications of such heterogeneous nano-cathodes in real devices, also the STO support should be active for both electron transport and oxide diffusion. To this end, we explored using first-principles calculations the strategy of doping of STO at the Sr site with sodium and potassium. These two ions fit in the perovskite structure and induce holes in the STO valence band, so as to obtain the desired p-type electronic conduction. At the same time, the doping with alkali ions also promotes the formation of oxygen vacancies in STO, a prerequisite for effective oxide diffusion. Analysis of electron density rearrangements upon defect formation allows relating the favorable vacancy formation energies to an improved electronic delocalization over the oxide sub-lattice, as observed in closely related materials (e.g. Sr2Fe1.5Mo0.5O6). Overall, our results suggest the alkali-doped STO as a new potential substrate material in nanoscale heterogeneous electrodes for solid oxide electrochemical cells.

  7. Electrical properties and surface morphology of electron beam evaporated p-type silicon thin films on polyethylene terephthalate for solar cells applications

    Energy Technology Data Exchange (ETDEWEB)

    Ang, P. C.; Ibrahim, K.; Pakhuruddin, M. Z. [Nano-Optoelectronics Research and Technology Laboratory, School of Physics, Universiti Sains Malaysia, Minden 11800 Penang (Malaysia)

    2015-04-24

    One way to realize low-cost thin film silicon (Si) solar cells fabrication is by depositing the films with high-deposition rate and manufacturing-compatible electron beam (e-beam) evaporation onto inexpensive foreign substrates such as glass or plastic. Most of the ongoing research is reported on e-beam evaporation of Si films on glass substrates to make polycrystalline solar cells but works combining both e-beam evaporation and plastic substrates are still scarce in the literature. This paper studies electrical properties and surface morphology of 1 µm electron beam evaporated Al-doped p-type silicon thin films on textured polyethylene terephthalate (PET) substrate for application as an absorber layer in solar cells. In this work, Si thin films with different doping concentrations (including an undoped reference) are prepared by e-beam evaporation. Energy dispersion X-ray (EDX) showed that the Si films are uniformly doped by Al dopant atoms. With increased Al/Si ratio, doping concentration increased while both resistivity and carrier mobility of the films showed opposite relationships. Root mean square (RMS) surface roughness increased. Overall, the Al-doped Si film with Al/Si ratio of 2% (doping concentration = 1.57×10{sup 16} atoms/cm{sup 3}) has been found to provide the optimum properties of a p-type absorber layer for fabrication of thin film Si solar cells on PET substrate.

  8. Influence of annealing in H atmosphere on the electrical properties of Al2O3 layers grown on p-type Si by the atomic layer deposition technique

    Science.gov (United States)

    Kolkovsky, Vl.; Stübner, R.; Langa, S.; Wende, U.; Kaiser, B.; Conrad, H.; Schenk, H.

    2016-09-01

    In the present study the electrical properties of 100 nm and 400 nm alumina films grown by the atomic layer deposition technique on p-type Si before and after a post-deposition annealing at 440 °C and after a dc H plasma treatment at different temperatures are investigated. We show that the density of interface states is below 2 × 1010 cm-2 in these samples and this value is significantly lower compared to that reported previously in thinner alumina layers (below 50 nm). The effective minority carrier lifetime τg,eff and the effective surface recombination velocity seff in untreated p-type Si samples with 100 nm and 400 nm aluminum oxide is comparable with those obtained after thermal oxidation of 90 nm SiO2. Both, a post-deposition annealing in forming gas (nitrogen/hydrogen) at elevated temperatures and a dc H-plasma treatment at temperatures close to room temperature lead to the introduction of negatively charged defects in alumina films. The results obtained in samples annealed in different atmospheres at different temperatures or subjected to a dc H plasma treatment allow us to correlate these centers with H-related defects. By comparing with theory we tentatively assign them to negatively charged interstitial H atoms.

  9. Electrical conductivity of metal powders under pressure

    Energy Technology Data Exchange (ETDEWEB)

    Montes, J.M.; Cintas, J.; Urban, P. [Universidad de Sevilla, Department of Mechanical and Materials Engineering Escuela Tecnica Superior de Ingenieria, Sevilla (Spain); Cuevas, F.G. [Universidad de Huelva, Department of Chemistry and Materials Science Escuela Tecnica Superior de Ingenieria, Palos de la Frontera (Spain)

    2011-12-15

    A model for calculating the electrical conductivity of a compressed powder mass consisting of oxide-coated metal particles has been derived. A theoretical tool previously developed by the authors, the so-called 'equivalent simple cubic system', was used in the model deduction. This tool is based on relating the actual powder system to an equivalent one consisting of deforming spheres packed in a simple cubic lattice, which is much easier to examine. The proposed model relates the effective electrical conductivity of the powder mass under compression to its level of porosity. Other physically measurable parameters in the model are the conductivities of the metal and oxide constituting the powder particles, their radii, the mean thickness of the oxide layer and the tap porosity of the powder. Two additional parameters controlling the effect of the descaling of the particle oxide layer were empirically introduced. The proposed model was experimentally verified by measurements of the electrical conductivity of aluminium, bronze, iron, nickel and titanium powders under pressure. The consistency between theoretical predictions and experimental results was reasonably good in all cases. (orig.)

  10. Two high-field thermodynamically stable conductivity states in photoconductive CdS, one n-type and one p-type

    Energy Technology Data Exchange (ETDEWEB)

    Böer, Karl W. [Department of Physics and Astronomy, 217 Sharp Lab, University of Delaware, Newark, Delaware 19716 (United States)

    2015-08-28

    Photoconductive CdS is known to be n-type and develops high-field domains in the range of negative differential conductivities. These domains have been extensively discussed, and when remaining attached to the electrodes have been renamed Böer domains (a broader definition suggested earlier is misleading) [K. Thiessen, Phys. Status Solidi B 248, 2775 (2011)]. They are occurring at high applied voltage in a range at which the current becomes highly non-ohmic that is conventionally described as N-shaped when the conductance decreases with increasing bias or as S-shaped when the current starts to increase again. In this paper only such cases will be discussed in which the current stays below significant Joule heating (no current channel formation), and only for stationary electrode-attached high-field domains. These are the cathode-attached domains that are maintained by field-quenching and are thermodynamically stable. Their finding is summarized in the first segment of this paper. When the applied voltage is increased, an anode-attached hyper-high-field domain develops that is stabilized by a hole blocking anode and will be analyzed in more detail below. It will be shown that they are a thermodynamically stable p-type photoconductive state of CdS. These two new states can be used to determine the carrier densities and mobilities as function of the field and the effective work function in dependence of the spectral distribution of the optical excitation. In a thin slab adjacent to a blocking cathode, the quasi-Fermi levels are spread to a precise amount and are kept there in the entire high-field region. This opens the opportunity to analyze with small modulation of the excitation the trap transition coefficients near these quasi-Fermi levels separately, without broadening interference from other signals. This has already resulted in the discovery of an unusually sharp electron quenching level when the CdS was in a p-type state with an anode adjacent domain. It is

  11. Lower Bound of Electrical Conductivity from Holography

    CERN Document Server

    Ge, Xian-Hui; Wu, Shao-Feng

    2015-01-01

    We propose a universal lower bound of dc electrical conductivity in rotational- and translational- symmetries breaking systems via the holographic duality. This bound predicts that BTZ-black brane can be easily used to realize linear temperature resistivity. We also construct an anisotropic black brane solution, which yields linear temperature for the in-plane resistivity and insulating behavior for the out-of-plane resistivity. Ultimately, we discuss its implications in experiments.

  12. Damage Detection in Electrically Conductive Structures

    Science.gov (United States)

    Anderson, Todd A.

    2002-12-01

    High-technology systems are in need of structures that perform with increased functionality and a reduction in weight, while simultaneously maintaining a high level of performance and reliability. To accomplish this, structural elements must be designed more efficiently and with increased functionality, thereby creating multifunctional structures (MFS). Through the addition of carbon fibers, nanotubes, or particles, composite structures can be made electrically conductive while simultaneously increasing their strength and stiffness to weight ratios. Using the electrical properties of these structures for the purpose of damage detection and location for health and usage monitoring is of particular interest for aerospace structures. One such method for doing this is Electrical Impedance Tomography (EIT). With EIT, an electric current is applied through a pair of electrodes and the electric potential is recorded at other monitoring electrodes around the area of study. An inverse solution of the governing Maxwell equations is then required to determine the conductivities of discrete areas within the region of interest. However, this method is nearly ill-posed and computationally intensive as it focuses on imaging small changes in conductivity within the region of interest. For locating damage in a medium with an otherwise homogeneous conductivity, an alternative approach is to search for parameters such as the damage location and size. Towards those ends, this study develops an Artificial Neural Network (ANN) to determine the state of an electrically conductive region based on applied reference current and electrical potentials at electrodes around the periphery of the region. A significant benefit of the ANN approach is that once trained, the solution of an inverse problem does not require costly computations of the inverse problem. This method also takes advantage of the pattern recognition abilities of neural networks and is a robust solution method in the presence

  13. DC electrical conductivity study of cerium doped conducting glass systems

    Science.gov (United States)

    Barde, R. V.; Waghuley, S. A.

    2013-06-01

    The glass samples of composition 60V2O5-5P2O5-(35-x)B2O3-xCeO2, (1 ≤ x ≤ 5) were prepared by the conventional melt quench method. The samples were characterized by X-ray diffraction and thermo gravimetric-differential thermal analysis. The glass transition temperature and crystallization temperature determined from TG-DTA analysis. The DC electrical conductivity has been carried out in the temperature range 303-473 K. The maximum conductivity and minimum activation energy were found to be 0.039 Scm-1 and 0.15 eV at 473 K for x=1, respectively.

  14. Finite Element Model of Cardiac Electrical Conduction.

    Science.gov (United States)

    Yin, John Zhihao

    1994-01-01

    In this thesis, we develop mathematical models to study electrical conduction of the heart. One important pattern of wave propagation of electrical excitation in the heart is reentry which is believed to be the underlying mechanism of some dangerous cardiac arhythmias such as ventricular tachycardia and ventricular fibrillation. We present in this thesis a new ionic channel model of the ventricular cardiac cell membrane to study the microscopic electrical properties of myocardium. We base our model on recent single channel experiment data and a simple physical diffusion model of the calcium channel. Our ionic channel model of myocardium has simpler differential equations and fewer parameters than previous models. Further more, our ionic channel model achieves better results in simulating the strength-interval curve when we connect the membrane patch model to form a one dimensional cardiac muscle strand. We go on to study a finite element model which uses multiple states and non-nearest neighbor interactions to include curvature and dispersion effects. We create a generalized lattice randomization to overcome the artifacts generated by the interaction between the local dynamics and the regularities of the square lattice. We show that the homogeneous model does not display spontaneous wavefront breakup in a reentrant wave propagation once the lattice artifacts have been smoothed out by lattice randomization with a randomization scale larger than the characteristic length of the interaction. We further develop a finite 3-D 3-state heart model which employs a probability interaction rule. This model is applied to the simulation of Body Surface Laplacian Mapping (BSLM) using a cylindrical volume conductor as the torso model. We show that BSLM has a higher spatial resolution than conventional mapping methods in revealing the underlying electrical activities of the heart. The results of these studies demonstrate that mathematical modeling and computer simulation are very

  15. Electrically Conductive Metal Nanowire Polymer Nanocomposites

    Science.gov (United States)

    Luo, Xiaoxiong

    This thesis investigates electrically conductive polymer nanocomposites formulated with metal nanowires for electrostatic discharge and electromagnetic interference shielding. Copper nanowires (CuNWs) of an average length of 1.98 mum and diameter of 25 +/- 4 nm were synthesized. The oxidation reaction of the CuNWs in air can be divided into two stages at weight of 111.2% on TGA curves. The isoconversional activation energies determined by Starink method were used to fit the different master plots. Johnson-Mehl-Avrami (JMA) equation gave the best fit. The surface atoms of the CuNWs are the sites for the random nucleation and the crystallite strain in the CuNWs is the driving force for the growth of nuclei mechanism during the oxidation process. To improve the anti-oxidation properties of the CuNWs, silver was coated onto the surface of the CuNWs in Ag-amine solution. The prepared silver coated CuNWs (AgCuNWs) with silver content of 66.52 wt. %, diameter of 28--33 nm exhibited improved anti-oxidation behavior. The electrical resistivity of the AgCuNW/low density polyethylene (LDPE) nanocomposites is lower than that of the CuNW/LDPE nanocomposites with the same volume percentage of fillers. The nanocomposites formulated with CuNWs and polyethylenes (PEs) were compared to study the different interaction between the CuNWs and the different types of PE matrices. The electrical conductivity of the different PE matrices filled with the same concentrations of CuNWs correlated well with the level of the CuNW dispersion. The intermolecular force and entanglement resulting from the different macromolecular structures such as molecular weight and branching played an important role in the dispersion, electrical properties and rheological behaviour of the CuNW/PE nanocomposites. Ferromagnetic polycrystalline nickel nanowires (NiNWs) were synthesized with uniform diameter of ca. 38 nm and an average length of 2.68 mum. The NiNW linear low density polyethylene (LLDPE

  16. Electrical conductivity of water-bearing magmas

    Science.gov (United States)

    Gaillard, F.

    2003-04-01

    Phase diagrams and chemical analyzes of crystals and glass inclusions of erupted lavas tell us that most explosive volcanic eruptions were caused by extremely water-rich pre-eruptive conditions. Volcanologists estimate volcanic hazards by the pre-eruptive water content of lavas erupted in the past and they hypothesize that future eruptions should show similar features. Alternatively, the development of methods allowing direct estimation of water content of magmas stored in the Earth’s interior would have the advantage of providing direct constraints about upcoming rather than past eruptions. Geoelectrical sounding, being the most sensitive probe to the chemical state of the Earth’s interior, seems a promising tool providing that its interpretation is based on relevant laboratory constraints. However, the current database of electrical conductivity of silicate melt merely constrains anhydrous composition. We have therefore undertaken an experimental program aiming at elucidating the effect of water on the electrical conductivity of natural magmas. Measurements (impedance spectroscopy) are performed using a two electrodes set-up in an internally heated pressure vessel. The explored temperature and pressure range is 25-1350°C and 0.1-400MPa. The material used is a natural rhyolitic obsidian. Hydration of this rhyolite is first performed in Pt capsules with 0.5, 1, 2 and 6wt% of water. In a second step, the conductivity measurements are performed at pressure and temperature in a modified Pt capsule. One end of the capsule is arc-welded whereas the other end is closed with the help of a BN cone and cement through which an inner electrode is introduced in the form a Pt wire. The capsule is used as outer electrode. The electrical cell has therefore a radial geometry. The rhyolite is introduced in the cell in the form of a cylinder drilled in the previously hydrated glass. At dwell condition, the melt is sandwiched between two slices of quartz avoiding any deformation

  17. Morphology and electrical conductivity of PACS

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    Polyaluminium chlorides with sulfate ion(PACS) were prepared by using AlCl3· 6H2O, Al(SO4 )3· 18H2O and Na2CO3 as raw materials. The effects of basicity (r), Al3 +/SO42- molar ratio and aging time on the morphology of PACS were observed by transmission electrical microscope. The influence of aging time on charge neutralization and coagulation effect of PACS was studied.The effects of basicity (r), Al3+/SO42- molar ratio and aging time on the electrical conductivity of PACS solution were also investigated. The experimental results show that the degree of polymerization of polyaluminium chloride(PAC) increases when SO42-ion is added. The higher the basicity(r) and the longer the aging time, the larger the size of polymer PACS. The ability of PACS neutralizing the charge on Kaolinite decreases with the increase of aging time. The electrical conductivity of PACS solution (the concentration of Al3+ ion is 0.18 mol/L) with different aging time is the function of the basicity and Al3 +/SO42- molar ratios and has its maximum at r = 0.5 and Al3+/SO42- = 12.

  18. Electrical conductivity of sulfamic acid single crystals

    Energy Technology Data Exchange (ETDEWEB)

    Varughese, G. [Department of Physics, Catholicate College, Pathanamthitta, Kerala (India); Iype, L. [School of Pure and Applied Physics, Mahatma Gandhi Unniversity, Kottayam, Kerala (India); Rajesh, R. [Department of Physics, N S S College, Manjeri, Malappuram, Kerala (India); Joseph, G. [Department of Physics, Sacred Heart College, Thevara, Cochin, Kerala (India); Louis, G. [Department of Physics, Cochin University of Science and Technology, Cochin, Kerala (India); Santhosh Kumar, A.

    2010-08-15

    Single crystals of sulfamic acid have been grown by the method of slow evaporation at constant temperature. DC electrical conductivity was measured in the temperature range 300 - 440 K along a, b and c-axes. Conductivity measurements show slope change near 330 K and 410 K. The slope change observed around 330 K may be attributed as due to a phase transition which has been well supported by the DSC and DTA measurements. Slope change observed around 410 K is attributed as the onset of the thermal decomcoposition as evidenced by TGA curve. TGA studies show the crystal is very stable up to 440 K. Activation energies for the conduction process are calculated for all measured crystallographic directions. (copyright 2010 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  19. Inductive Measurement of Plasma Jet Electrical Conductivity

    Science.gov (United States)

    Turner, Matthew W.; Hawk, Clark W.; Litchford, Ron J.

    2005-01-01

    An inductive probing scheme, originally developed for shock tube studies, has been adapted to measure explosive plasma jet conductivities. In this method, the perturbation of an applied magnetic field by a plasma jet induces a voltage in a search coil, which, in turn, can be used to infer electrical conductivity through the inversion of a Fredholm integral equation of the first kind. A 1-inch diameter probe was designed and constructed, and calibration was accomplished by firing an aluminum slug through the probe using a light-gas gun. Exploratory laboratory experiments were carried out using plasma jets expelled from 15-gram high explosive shaped charges. Measured conductivities were in the range of 3 kS/m for unseeded octol charges and 20 kS/m for seeded octol charges containing 2% potassium carbonate by mass.

  20. Universality of DC electrical conductivity from holography

    Science.gov (United States)

    Ge, Xian-Hui; Sin, Sang-Jin; Wu, Shao-Feng

    2017-04-01

    We propose a universal formula of dc electrical conductivity in rotational- and translational-symmetries breaking systems via the holographic duality. This formula states that the ratio of the determinant of the dc electrical conductivities along any spatial directions to the black hole area density in zero-charge limit has a universal value. As explicit illustrations, we give several examples elucidating the validation of this formula: We construct an anisotropic black brane solution, which yields linear in temperature for the in-plane resistivity and insulating behavior for the out-of-plane resistivity; We also construct a spatially isotropic black brane solution that both the linear-T and quadratic-T contributions to the resistivity can be realized. 1). For Z (ϕ) = 1 and d ≥ 3, isotropic black branes in the AdS space cannot be utilized to realize linear temperature resistivity in the zero-charges limit. Nevertheless, anisotropic black branes are good candidates in model-building of holographic strange metals. 2). For d + 1-dimensional spatially isotropic Lifshitz black holes with Z (ϕ) = 1 in the absence of hyperscaling violation, this relation indicates that σii|qi=0 =[ 4 π / (d + z - 1) ] d - 3T (d - 3) / z, which is consistent with what obtained in Refs. [23,24] based on a universal scaling relation hypothesis: σ (ω = 0) =T (d - 3) / z Θ (0), where z is a dynamical critical exponent and Θ (ω) is a frequency dependent function. 3). This relation applies to shear viscosity-bound and electrical conductivity-bound violated systems, for example, systems considered in [20,25,26]. In [27], the authors conjectured that for the case d = 3, there exists a lower bound of dc electrical conductivity ∏iσii > 1. But it was soon found that this bound can be violated by a special coupling between the linear axion fields and the U (1) gauge field [25,26]. The structure of this paper is organized as follows. In section 2, we present our main results by writing

  1. Electrical Conductivity Calculations from the Purgatorio Code

    Energy Technology Data Exchange (ETDEWEB)

    Hansen, S B; Isaacs, W A; Sterne, P A; Wilson, B G; Sonnad, V; Young, D A

    2006-01-09

    The Purgatorio code [Wilson et al., JQSRT 99, 658-679 (2006)] is a new implementation of the Inferno model describing a spherically symmetric average atom embedded in a uniform plasma. Bound and continuum electrons are treated using a fully relativistic quantum mechanical description, giving the electron-thermal contribution to the equation of state (EOS). The free-electron density of states can also be used to calculate scattering cross sections for electron transport. Using the extended Ziman formulation, electrical conductivities are then obtained by convolving these transport cross sections with externally-imposed ion-ion structure factors.

  2. Dipole-induced conductivity enhancement by n-type inclusion in a p-type system: α-Fe₂O₃-PEDOT:PSS nanocomposites.

    Science.gov (United States)

    Raccis, R; Wortmann, L; Ilyas, S; Schläfer, J; Mettenbörger, A; Mathur, S

    2014-08-07

    Hematite (α-Fe2O3) nanoparticles of two different shapes but of same size (ca. 40 nm) were dispersed in PEDOT:PSS matrices in various concentration ranges (0-7 wt%) to study the consequent changes in conductivity in the dark and under solar illumination conditions. Within a distinct range of concentration, a distinct increase in the conductivity was observed for both spherical and cubical particle population. We ascribed this effect to the generalized Poole-Frenkel theory of conduction in conjunction with the basic depletion width properties of heterojunctions and electrostatic dipole moments, and verified our assumptions through data fitting. A difference in conductivity between sphere- and cube-based α-Fe2O3-PEDOT:PSS nanocomposites was also observed and ascribed to the electrostatic edge effect on the nanoparticles. The dispersion of α-Fe2O3 nanocrystals was confirmed by high-resolution electron microscopy, whereas the electrical properties and modulations thereof were followed by recording current-voltage characteristics.

  3. Modeling liver electrical conductivity during hypertonic injection.

    Science.gov (United States)

    Castellví, Quim; Sánchez-Velázquez, Patricia; Moll, Xavier; Berjano, Enrique; Andaluz, Anna; Burdío, Fernando; Bijnens, Bart; Ivorra, Antoni

    2017-05-30

    Metastases in the liver frequently grow as scattered tumor nodules that neither can be removed by surgical resection nor focally ablated. Previously, we have proposed a novel technique based on irreversible electroporation that may be able to simultaneously treat all nodules in the liver while sparing healthy tissue. The proposed technique requires increasing the electrical conductivity of healthy liver by injecting a hypersaline solution through the portal vein. Aiming to assess the capability of increasing the global conductivity of the liver by means of hypersaline fluids, here, it is presented a mathematical model that estimates the NaCl distribution within the liver and the resulting conductivity change. The model fuses well-established compartmental pharmacokinetic models of the organ with saline injection models used for resuscitation treatments, and it considers changes in sinusoidal blood viscosity because of the hypertonicity of the solution. Here, it is also described a pilot experimental study in pigs in which different volumes of NaCl 20% (from 100 to 200 mL) were injected through the portal vein at different flow rates (from 53 to 171 mL/minute). The in vivo conductivity results fit those obtained by the model, both quantitatively and qualitatively, being able to predict the maximum conductivity with a 14.6% average relative error. The maximum conductivity value was 0.44 second/m, which corresponds to increasing 4 times the mean basal conductivity (0.11 second/m). The results suggest that the presented model is well suited for predicting on liver conductivity changes during hypertonic saline injection. Copyright © 2017 John Wiley & Sons, Ltd.

  4. Lead free CH{sub 3}NH{sub 3}SnI{sub 3} perovskite thin-film with p-type semiconducting nature and metal-like conductivity

    Energy Technology Data Exchange (ETDEWEB)

    Iefanova, Anastasiia; Adhikari, Nirmal; Dubey, Ashish; Khatiwada, Devendra; Qiao, Qiquan, E-mail: qiquan.qiao@sdstate.edu [South Dakota State University, Brookings, South Dakota (United States)

    2016-08-15

    Lead free CH{sub 3}NH{sub 3}SnI{sub 3} perovskite thin film was prepared by low temperature solution processing and characterized using current sensing atomic force microscopy (CS-AFM). Analysis of electrical, optical, and optoelectrical properties reveals unique p-type semiconducting nature and metal like conductivity of this material. CH{sub 3}NH{sub 3}SnI{sub 3} film also showed a strong absorption in visible and near infrared spectrum with absorption onset of 1.3 eV. X-ray Diffraction analysis and scanning electron microscopy (SEM) confirmed a structure of this compound and uniform film formation. The morphology, film uniformity, light harvesting and electrical properties strongly depend on preparation method and precursor solution. CH{sub 3}NH{sub 3}SnI{sub 3} films prepared based on dimethylformamide (DMF) showed higher crystallinity and light harvesting capability compared to the film based on combination of dimethyl sulfoxide (DMSO) with gamma-butyrolactone (GBL). Local photocurrent mapping analysis showed that CH{sub 3}NH{sub 3}SnI{sub 3} can be used as an active layer and have a potential to fabricate lead free photovoltaic devices.

  5. Study of the electrical, thermal and chemical properties of Pd ohmic contacts to p-type 4H-SiC: dependence on annealing conditions

    Energy Technology Data Exchange (ETDEWEB)

    Kassamakova, L.; Kakanakov, R. [Inst. of Appl. Phys., Plovdiv (Bulgaria). BAS; Nordell, N.; Savage, S. [Industrial Microelectronics Center, Kista (Sweden); Kakanakova-Georgieva, A.; Marinova, Ts. [Inst. of General and Inorganic Chemistry, BAS, Sofia (Bulgaria)

    1999-07-30

    The electrical and chemical properties of Pd ohmic contacts to p-type 4H-SiC, together with their thermal stability, have been studied in the annealing temperature range 600 - 700 C. The ohmic behaviour of as-deposited and annealed contacts has been checked from I - V characteristics and the contact resistivity has been determined by the linear TLM method in order to determine the electrical properties and the thermal stability. An ohmic behaviour was established after annealing at 600 C, while the lowest contact resistivity 5.5 x 10{sup -5} {omega}cm{sup 2} was obtained at 700 C. The contact structure, before and after annealing, was investigated using X-ray photoelectron spectroscopy depth analysis. As-deposited Pd films form an abrupt and chemically inert Pd/SiC interface. Annealing causes the formation of palladium silicide. After formation at 600 C the contact structure consists of unreacted Pd and Pd{sub 3}Si. During annealing at 700 C. Pd and SiC react completely and a mixture of Pd{sub 3}Si, Pd{sub 2}Si and C in a graphite state is found in the contact layer. The examination of the thermal stability shows that after a 100 h heating at 500 C, only the contacts annealed at 700 C did not suffer from a change in resistivity. This can be explained by a more complete reaction between the Pd contact layer and the SiC substrate at this higher annealing temperature. (orig.)

  6. Anisotropy of electrical conductivity in dry olivine

    Energy Technology Data Exchange (ETDEWEB)

    Du Frane, W L; Roberts, J J; Toffelmier, D A; Tyburczy, J A

    2005-04-13

    [1] The electrical conductivity ({sigma}) was measured for a single crystal of San Carlos olivine (Fo{sub 89.1}) for all three principal orientations over oxygen fugacities 10{sup -7} < fO{sub 2} < 10{sup 1} Pa at 1100, 1200, and 1300 C. Fe-doped Pt electrodes were used in conjunction with a conservative range of fO{sub 2}, T, and time to reduce Fe loss resulting in data that is {approx}0.15 log units higher in conductivity than previous studies. At 1200 C and fO{sub 2} = 10{sup -1} Pa, {sigma}{sub [100]} = 10{sup -2.27} S/m, {sigma}{sub [010]} = 10{sup -2.49} S/m, {sigma}{sub [001]} = 10{sup -2.40} S/m. The dependences of {sigma} on T and fO{sub 2} have been simultaneously modeled with undifferentiated mixed conduction of small polarons and Mg vacancies to obtain steady-state fO{sub 2}-independent activation energies: Ea{sub [100]} = 0.32 eV, Ea{sub [010]} = 0.56 eV, Ea{sub [001]} = 0.71 eV. A single crystal of dry olivine would provide a maximum of {approx}10{sup 0.4} S/m azimuthal {sigma} contrast for T < 1500 C. The anisotropic results are combined to create an isotropic model with Ea = 0.53 eV.

  7. Sintering Behavior and Effect of Silver Nanowires on the Electrical Conductivity of Electrically Conductive Adhesives.

    Science.gov (United States)

    Xie, H; Xiong, N N; Wang, Y H; Zhao, Y Z; Li, J Z

    2016-01-01

    In this paper, two kinds of silver nanowires with a 160 nm average diameter ranging from 30 to 90 µm length and a 450 nm average diameter up to 100 µm length were successfully synthesized by a polyol process with FeCl3 and Na₂S as reaction inhibitor, respectively. The experimental results indicate that the morphologies and sintering behaviors of both of silver nanowires are impacted by glutaric acid and sintering temperature. The isotropically conductive adhesives (ICAs) filled with micro-sized silver flakes and silver nanowires as hybrid fillers were fabricated and the electrical properties were investigated based on the fraction of the silver nanowires of the total of silver fillers and the curing temperature, etc. The in situ monitoring the variation in electrical resistance of the ICAs explores that silver nanowires have influence on the curing behavior of the ICAs. Silver nanowires synthesized with Na2S as reaction inhibitor and treated with glutaric acid can significantly improve the electrical conductivity of the ICAs in the case of the low loading of silver fillers in the appropriate proportion range of the weight ratio of micro-sized silver flakes and silver nanowires, primarily as a result of connecting effect. When the loading of silver fillers in the ICAs is high, the electrical conductivity is also enhanced slightly in the case of the proper fraction of silver nanowires of the total of silver fillers. The effect of the curing temperature on the electrical conductivity relates to the fraction of silver nanowires and the total loading of silver fillers. The electrical conductivity of the ICAs filled with micro-sized silver flakes and silver nanowires synthesized with FeCl₃ as reaction inhibitor is greatly damaged, indicating that the size of silver nanowires also is one of main factor to impact the electrical conductivity of the ICAs doped with silver nanowires. The electrical property of the ICAs filled with micro-sized silver flakes and silver

  8. Form Invariant Sommerfeld Electrical Conductivity in Generalised d Dimensions

    Institute of Scientific and Technical Information of China (English)

    Muktish Acharyya

    2011-01-01

    The Sommerfeld electrical conductivity is calculated in d dimensions following Boltzmann kinetic approach. At T =0, the mathematical form of the electrical conductivity is found to remain invariant in any generalised spatial (d) dimensions.

  9. Temporal stability of electrical conductivity in a sandy soil

    Science.gov (United States)

    Pedrera-Parrilla, Aura; Brevik, Eric C.; Giráldez, Juan V.; Vanderlinden, Karl

    2016-07-01

    Understanding of soil spatial variability is needed to delimit areas for precision agriculture. Electromagnetic induction sensors which measure the soil apparent electrical conductivity reflect soil spatial variability. The objectives of this work were to see if a temporally stable component could be found in electrical conductivity, and to see if temporal stability information acquired from several electrical conductivity surveys could be used to better interpret the results of concurrent surveys of electrical conductivity and soil water content. The experimental work was performed in a commercial rainfed olive grove of 6.7 ha in the `La Manga' catchment in SW Spain. Several soil surveys provided gravimetric soil water content and electrical conductivity data. Soil electrical conductivity values were used to spatially delimit three areas in the grove, based on the first principal component, which represented the time-stable dominant spatial electrical conductivity pattern and explained 86% of the total electrical conductivity variance. Significant differences in clay, stone and soil water contents were detected between the three areas. Relationships between electrical conductivity and soil water content were modelled with an exponential model. Parameters from the model showed a strong effect of the first principal component on the relationship between soil water content and electrical conductivity. Overall temporal stability of electrical conductivity reflects soil properties and manifests itself in spatial patterns of soil water content.

  10. The electrical conductivity of polycrystalline metallic films

    Science.gov (United States)

    Moraga, Luis; Arenas, Claudio; Henriquez, Ricardo; Bravo, Sergio; Solis, Basilio

    2016-10-01

    We calculate the electrical conductivity of polycrystalline metallic films by means of a semi-numerical procedure that provides solutions of the Boltzmann transport equation, that are essentially exact, by summing over classical trajectories according to Chambers' method. Following Mayadas and Shatzkes (MS), grain boundaries are modeled as an array of parallel plane barriers situated perpendicularly to the direction of the current. Alternatively, according to Szczyrbowski and Schmalzbauer (SS), the model consists in a triple array of these barriers in mutual perpendicular directions. The effects of surface roughness are described by means of Fuchs' specularity parameters. Following SS, the scattering properties of grain boundaries are taken into account by means of another specularity parameter and a probability of coherent passage. The difference between the sum of these and one is the probability of diffuse scattering. When this formalism is compared with the approximate formula of Mayadas and Shatzkes (Phys. Rev. B 1, 103 (1986)) it is shown that the latter greatly overestimates the film resistivity over most values of the reflectivity of the grain boundaries. The dependence of the conductivity of thin films on the probability of coherent passage and grain diameters is examined. In accordance with MS we find that the effects of disorder in the distribution of grain diameters is quite small. Moreover, we find that it is not safe to neglect the effects of the scattering by the additional interfaces created by stacked grains. However, when compared with recent resitivity-thickness data, it is shown that all three formalisms can provide accurate fits to experiment. In addition, it is shown that, depending on the respective reflectivities and distance from a surface, some of these interfaces may increase or diminish considerably the conductivity of the sample. As an illustration of this effect, we show a tentative fit of resistivity data of gold films measured by

  11. Electrical conductivity of nanostructured and C60-modified aluminum

    NARCIS (Netherlands)

    Zameshin, A.; Popov, M.; Medvedev, V.V.; Perfilov, S.; Lomakin, R.; Buga, S.; Denisov, V.; Kirichenko, A.; Skryleva, E.; Tatyanin, E.; Aksenenkov, V.; Blank, V.

    2012-01-01

    In this paper, we study the electrical conductivity of nanostructured C60-modified aluminum, and the possibility of optimizing its electrical and mechanical properties. The model proposed allows estimating the electrical conductivity of the material at low surface filling factor. A number of samples

  12. Electrical conductivity of nanostructured and C-60-modified aluminum

    NARCIS (Netherlands)

    Zameshin, A.; Popov, M.; Medvedev, V.; Perfilov, S.; Lomakin, R.; Buga, S.; Denisov, V.; Kirichenko, A.; Skryleva, E.; Tatyanin, E.; Aksenenkov, V.; Blank, V.

    2012-01-01

    In this paper, we study the electrical conductivity of nanostructured C-60-modified aluminum, and the possibility of optimizing its electrical and mechanical properties. The model proposed allows estimating the electrical conductivity of the material at low surface filling factor. A number of sample

  13. Effect of Synthesis Conditions on Formation, Electrical Properties, and Seebeck Coefficient of p-Type Ca3Co4O9± δ Thermoelectric Ceramics

    Science.gov (United States)

    Radhika, T.; Raghu, N.; Powrnami, N.; Jothi Ramalingam, R.; Al-Lohedan, Hamad A.

    2017-03-01

    Ca3Co4O9± δ ceramic powders have been prepared by a solid-state method. The calcination and sintering temperatures and reaction conditions were varied to achieve highly dense materials for thermoelectric applications. The optimized calcination temperature and reaction conditions were derived. X-ray diffraction patterns showed formation of secondary phases for longer calcination duration. The density of the ceramics ranged from 3.2 g cm-3 to 3.4 g cm-3, not varying greatly with the calcination/sintering conditions. The electrical properties and Seebeck coefficient reveal that the density and nonstoichiometry greatly influenced the achievement of good thermoelectric properties. Transmission electron microscopy (TEM) images showed fine particles with nanosize, strongly bound together to form metal-rich particle aggregates. Tubular morphology below 50 nm to 100 nm scale was observed in TEM images of as-prepared solid-state Ca3Co4O9± δ . As-prepared samples showed improved electrical conductivity and Seebeck coefficient, suitable for thermoelectric applications.

  14. Electrical Conduction of Some Fe3S3 Ring Compounds

    Institute of Scientific and Technical Information of China (English)

    WANG Jian; LIU Ping; YOU Gang

    2003-01-01

    @@ M3S3 cluster six-membered ring compounds are very interesting compounds liking aromatic benzene, and Cu, Pd, B and so on can also form M3S3 cluster besides Fe. [1,2] In recent years electrical conduction of some metal com plexes has been studied. [3,4] The study of electrical conduction through DNA molecules has illustrated that DNA is a semiconductor, but its principle of electrical conduction has not been revealed. [5,6] Electrical conduction of artificial synthesized Fe-S cluster compounds has not been reported. We hope to infer the function on electrical conduction of metal active centers of iron-sulfur proteins through study of electrical conduction of Fe3S3 ring compounds, paving the way for the discovery of new advanced biological functional materials.

  15. Electrical conduction in solid materials physicochemical bases and possible applications

    CERN Document Server

    Suchet, J P

    2013-01-01

    Electrical Conduction in Solid Materials (Physicochemical Bases and Possible Applications) investigates the physicochemical bases and possible applications of electrical conduction in solid materials, with emphasis on conductors, semiconductors, and insulators. Topics range from the interatomic bonds of conductors to the effective atomic charge in conventional semiconductors and magnetic transitions in switching semiconductors. Comprised of 10 chapters, this volume begins with a description of electrical conduction in conductors and semiconductors, metals and alloys, as well as interatomic bon

  16. Electrical conductivity, ionic conductivity, optical absorption, and gas separation properties of ionically conductive polymer membranes embedded with Si microwire arrays

    OpenAIRE

    Spurgeon, Joshua M.; Walter, Michael G.; Zhou, Junfeng; Kohl, Paul A.; Lewis, Nathan S.

    2011-01-01

    The optical absorption, ionic conductivity, electronic conductivity, and gas separation properties have been evaluated for flexible composite films of ionically conductive polymers that contain partially embedded arrays of ordered, crystalline, p-type Si microwires. The cation exchange ionomer Nafion, and a recently developed anion exchange ionomer, poly(arylene ether sulfone) that contains quaternary ammonium groups (QAPSF), produced composite microwire array/ionomer membrane films that were...

  17. Method of forming an electrically conductive cellulose composite

    Science.gov (United States)

    Evans, Barbara R.; O'Neill, Hugh M.; Woodward, Jonathan

    2011-11-22

    An electrically conductive cellulose composite includes a cellulose matrix and an electrically conductive carbonaceous material incorporated into the cellulose matrix. The electrical conductivity of the cellulose composite is at least 10 .mu.S/cm at 25.degree. C. The composite can be made by incorporating the electrically conductive carbonaceous material into a culture medium with a cellulose-producing organism, such as Gluconoacetobacter hansenii. The composites can be used to form electrodes, such as for use in membrane electrode assemblies for fuel cells.

  18. Anisotropic ion diffusivity in intervertebral disc: an electrical conductivity approach.

    Science.gov (United States)

    Jackson, Alicia; Yao, Hai; Brown, Mark D; Yong Gu, Wei

    2006-11-15

    Investigation of the transport behavior of ions in intervertebral disc using an electrical conductivity method. To determine the electrical conductivity and ion diffusivity of nucleus pulposus and anulus fibrosus in 3 major directions (axial, circumferential, and radial). Knowledge of diffusivity of small molecules is important for understanding nutrition supply in intervertebral disc and disc degeneration. However, little is known on the anisotropic behaviors of ion diffusivity and of electrical conductivity in intervertebral disc. Electrical conductivity measurement was performed on 24 axial, circumferential, and radial anulus fibrosus specimens and 24 axial nucleus pulposus specimens from bovine coccygeal discs. The diffusivity of Na and Cl were estimated by the analysis of conductivity data. The electrical conductivity (mean +/- standard deviation; n = 24) of the bovine anulus fibrosus was 4.70 +/- 1.08 mS/cm in the axial, 2.86 +/- 0.83 mS/cm in the radial, and 4.38 +/- 1.25 mS/cm in the circumferential direction. For nucleus pulposus, the electrical conductivity (mean +/- standard deviation; n = 24) was 8.95 +/- 0.89 mS/cm. The mean value for nucleus pulposus was significantly higher than that of anulus fibrosus (t test, P conductivity in the radial direction was significantly lower than in axial or circumferential directions. Similar trends were found for both Na and Cl diffusivities. Both electrical conductivity and ion diffusivity were highly sensitive to water content. Electrical conductivity and ion diffusivity of anulus fibrosus are anisotropic.

  19. Effects of Concentration and Substrate Type on Structure and Conductivity of p-Type CuS Thin Films Grown by Spray Pyrolysis Deposition

    Science.gov (United States)

    Sabah, Fayroz A.; Ahmed, Naser M.; Hassan, Z.

    2016-09-01

    Copper sulphide (CuS) thin films were grown upon Ti, indium tin oxide (ITO), and glass substrates by using spray pyrolysis deposition at 200°C. The films exhibited good adhesion compared to chemical bath deposition. CuCl2·2H2O and Na2S2O3·5H2O precursors were used as Cu2+ and S2- sources, respectively. Two concentrations (i.e., 0.2 M and 0.4 M) were selected in this study. X-ray diffraction analysis reveals that the films with 0.2 M showed only the formation of a covellite CuS phase having a hexagonal crystal structure with diffraction peaks of low intensity. For 0.4 M concentration, in addition to the covellite CuS phase, chalcocite Cu2S phase having a hexagonal crystal structure also appeared with relatively higher intensity peaks for all thin films. Field-emission scanning electron microscopy observations showed the formation of small grains for 0.2 M, whereas a mixture of grains with square-like shape and nanoplates were formed for 0.4 M. Depending on the 0.2 M and 0.4 M thin films thicknesses (3.2 μm and 4 μm, respectively), the band gap energy was obtained from optical measurements to be approximately 2.64 eV for 0.2 M (pure CuS phase), which slightly decreased up to 2.56 eV for 0.4 M concentration. Hall effect measurements showed that all grown films are p-type. The 0.2 M film exhibited much lower sheet resistance (R sh = 33.96 Ω/Sq-55.70 Ω/Sq) compared to 0.4 M film (R sh = 104.33 Ω/Sq-466.6 Ω/Sq). Moreover, for both concentrations, the films deposited onto ITO substrate showed the lowest sheet resistance (R sh = 33.96 Ω/Sq-104.33 Ω/Sq).

  20. Effects of Concentration and Substrate Type on Structure and Conductivity of p-Type CuS Thin Films Grown by Spray Pyrolysis Deposition

    Science.gov (United States)

    Sabah, Fayroz A.; Ahmed, Naser M.; Hassan, Z.

    2017-01-01

    Copper sulphide (CuS) thin films were grown upon Ti, indium tin oxide (ITO), and glass substrates by using spray pyrolysis deposition at 200°C. The films exhibited good adhesion compared to chemical bath deposition. CuCl2·2H2O and Na2S2O3·5H2O precursors were used as Cu2+ and S2- sources, respectively. Two concentrations (i.e., 0.2 M and 0.4 M) were selected in this study. X-ray diffraction analysis reveals that the films with 0.2 M showed only the formation of a covellite CuS phase having a hexagonal crystal structure with diffraction peaks of low intensity. For 0.4 M concentration, in addition to the covellite CuS phase, chalcocite Cu2S phase having a hexagonal crystal structure also appeared with relatively higher intensity peaks for all thin films. Field-emission scanning electron microscopy observations showed the formation of small grains for 0.2 M, whereas a mixture of grains with square-like shape and nanoplates were formed for 0.4 M. Depending on the 0.2 M and 0.4 M thin films thicknesses (3.2 μm and 4 μm, respectively), the band gap energy was obtained from optical measurements to be approximately 2.64 eV for 0.2 M (pure CuS phase), which slightly decreased up to 2.56 eV for 0.4 M concentration. Hall effect measurements showed that all grown films are p-type. The 0.2 M film exhibited much lower sheet resistance ( R sh = 33.96 Ω/Sq-55.70 Ω/Sq) compared to 0.4 M film ( R sh = 104.33 Ω/Sq-466.6 Ω/Sq). Moreover, for both concentrations, the films deposited onto ITO substrate showed the lowest sheet resistance ( R sh = 33.96 Ω/Sq-104.33 Ω/Sq).

  1. Wet method for measuring starch gelatinization temperature using electrical conductivity.

    Science.gov (United States)

    Morales-Sanchez, E; Figueroa, J D C; Gaytan-Martínez, M

    2009-09-01

    The objective of the present study was to develop a method for obtaining the gelatinization temperature of starches by using electrical conductivity. Native starches from corn, rice, potato, and wheat were prepared with different proportions of water and heated from room temperature to 90 degrees C, in a device especially designed for monitoring the electrical conductivity as a function of temperature. The results showed a linear trend of the electrical conductivity with the temperature until it reaches the onset gelatinization temperature. After that point, the electrical conductivity presented an increment or decrement depending on the water content in the sample and it was related to starch swelling and gelatinization phenomena. At the end gelatinization temperature, the conductivity becomes stable and linear, indicating that there are no more changes of phase. The starch gelatinization parameter, which was evaluated in the 4 types of starches using the electrical conductivity, was compared with those obtained by using differential scanning calorimeter (DSC). The onset temperature at which the electrical conductivity increased or decreased was found to be similar to that obtained by DSC. Also, the final temperature at which the electrical conductivity returned to linearity matched the end gelatinization temperature of the DSC. Further, a wet method for measuring the onset, peak, and end gelatinization temperatures as a function of temperature using the electrical conductivity curves is presented for a starch-water suspension.

  2. Ambient effects on the electrical conductivity of carbon nanotubes

    DEFF Research Database (Denmark)

    Roch, Aljoscha; Greifzu, Moritz; Roch Talens, Esther

    2015-01-01

    We show that the electrical conductivity of single walled carbon nanotubes (SWCNT) networks is affected by oxygen and air humidity under ambient conditions by more than a magnitude. Later, we intentionally modified the electrical conductivity by functionalization with iodine and investigated...

  3. Electrical conductivity measurements of nanofluids and development of new correlations.

    Science.gov (United States)

    Konakanchi, Hanumantharao; Vajjha, Ravikanth; Misra, Debasmita; Das, Debendra

    2011-08-01

    In this study the electrical conductivity of aluminum oxide (Al2O3), silicon dioxide (SiO2) and zinc oxide (ZnO) nanoparticles dispersed in propylene glycol and water mixture were measured in the temperature range of 0 degrees C to 90 degrees C. The volumetric concentration of nanoparticles in these fluids ranged from 0 to 10% for different nanofluids. The particle sizes considered were from 20 nm to 70 nm. The electrical conductivity measuring apparatus and the measurement procedure were validated by measuring the electrical conductivity of a calibration fluid, whose properties are known accurately. The measured electrical conductivity values agreed within +/- 1% with the published data reported by the manufacturer. Following the validation, the electrical conductivities of different nanofluids were measured. The measurements showed that electrical conductivity of nanofluids increased with an increase in temperature and also with an increase in particle volumetric concentration. For the same nanofluid at a fixed volumetric concentration, the electrical conductivity was found to be higher for smaller particle sizes. From the experimental data, empirical models were developed for three nanofluids to express the electrical conductivity as functions of temperature, volumetric concentration and the size of the nanoparticles.

  4. Electrical conduction in graphene and nanotubes

    CERN Document Server

    Fujita, Shigeji

    2013-01-01

    Written in a self-contained manner, this textbook allows both advanced students and practicing applied physicists and engineers to learn the relevant aspects from the bottom up. All logical steps are laid out without omitting steps.The book covers electrical transport properties in carbon based materials by dealing with statistical mechanics of carbon nanotubes and graphene ? presenting many fresh and sometimes provoking views. Both second quantization and superconductivity are covered and discussed thoroughly. An extensive list of references is given in the end of each chapter, while derivati

  5. A simple and innovative route to electrosynthesis of Eu2O3 nanoparticles and its nanocomposite with p-type conductive polymer: Characterisation and electrochemical properties.

    Science.gov (United States)

    Mohammad Shiri, H; Ehsani, A

    2016-07-01

    Conductive polymers are usually used as an electrode in redox supercapacitor. However, due to accumulation of stress on polymer during repeating charge-discharge process, the cycle life of pure conductive polymer is poor, which needs to be further improved. For this purpose, combining conventional conductive polymers active material and nanomaterials to fabricate hybrid electrode has been considered to be one of the efficient avenues. In this paper, a simple and rapid electrochemical method has been carried out to prepare Eu2O3 nanoparticles and hybrid POAP/Eu2O3 to serve as the active electrode for electrochemical supercapacitor. Structural and morphological characterisations of Eu2O3 and composite film were carried out using powder X-ray diffraction, field emission scanning electron microscopy and energy dispersion of X-rays. Their electrochemical properties were also investigated using cyclic voltammetry, galvanostatic charge-discharge and electrochemical impedance spectroscopy. The as-prepared composites had excellent properties in the specific capacitance and a coulombic efficiency of 95%. The as-prepared composites had excellent properties in the capacitance, and its specific capacitance was up to 375Fg(-1) and a coulombic efficiency of 95%. This work introduces new nanocomposite materials for electrochemical redox capacitors with advantages including ease synthesis, high active surface area and stability in an aqueous electrolyte.

  6. Electrical conductivity measurements from the STRATCOM 8 experiment

    Science.gov (United States)

    Mitchell, J. D.; Ho, K. J.; Half, L. C.; Croskey, C. L.; Olsen, R. O.

    1978-01-01

    A blunt probe experiment for measuring electrical conductivity was flown with the STRATCOM 8 instrument package. Data were obtained by the instrument throughout the entire measurement period. A preliminary analysis of the data indicates an enhancement in conductivity associated with the krypton discharge ionization lamp, particularly in negative conductivity. The conductivity values and their altitude dependence are consistent with previous balloon and rocket results.

  7. Electrically conductive lines on cellulose nanopaper for flexible electrical devices

    Science.gov (United States)

    Hsieh, Ming-Chun; Kim, Changjae; Nogi, Masaya; Suganuma, Katsuaki

    2013-09-01

    Highly conductive circuits are fabricated on nanopapers composed of densely packed 15-60 nm wide cellulose nanofibers. Conductive materials are deposited on the nanopaper and mechanically sieved through the densely packed nanofiber networks. As a result, their conductivity is enhanced to the level of bulk silver and LED lights are successfully illuminated via these metallic conductive lines on the nanopaper. Under the same deposition conditions, traditional papers consisting of micro-sized pulp fibers produced very low conductivity lines with non-uniform boundaries because of their larger pore structures. These results indicate that advanced, lightweight and highly flexible devices can be realized on cellulose nanopaper using continuous deposition processes. Continuous deposition on nanopaper is a promising approach for a simple roll-to-roll manufacturing process.

  8. Structural and Electrical Study of Conducting Polymers

    Science.gov (United States)

    Shaktawat, Vinodini; Dixit, Manasvi; Saxena, N. S.; Sharma, Kananbala

    2010-06-01

    Pure and oxalic acid doped conducting polymers (polyaniline and polypyrrole) were chemically synthesized using ammonium persulfate (APS) as an oxidant. These samples were characterized through Scanning Electron Microscopy (SEM), which provides information about the surface topography of polymers. I-V characteristics have been recorded at room temperature as well as in the temperature range from 313 K to 463 K. So obtained characteristic curves were found to be linear. Temperature dependence of conductivity suggests a semiconducting nature in polyaniline samples with increase in temperature, whereas oxalic acid doped polypyrrole sample suggests a transition from semiconducting to metallic nature with the increase of temperature.

  9. (ECG). Part 2:Abnormalities of electrical conduction

    African Journals Online (AJOL)

    Ann Burgess

    noticeable effect at all (asymptomatic) through to sudden death ... This may result in failure of the heart rate to rise adequately with exercise (chronotropic ... there are varying degrees of AV block and these result in different patterns of ... Mobitz Type 2 second degree AV block; on this occasion only 1 P wave in 3 is conducted ...

  10. Variable Anisotropic Brain Electrical Conductivities in Epileptogenic Foci

    Science.gov (United States)

    Mandelkern, M.; Bui, D.; Salamon, N.; Vinters, H. V.; Mathern, G. W.

    2010-01-01

    Source localization models assume brain electrical conductivities are isotropic at about 0.33 S/m. These assumptions have not been confirmed ex vivo in humans. This study determined bidirectional electrical conductivities from pediatric epilepsy surgery patients. Electrical conductivities perpendicular and parallel to the pial surface of neocortex and subcortical white matter (n = 15) were measured using the 4-electrode technique and compared with clinical variables. Mean (±SD) electrical conductivities were 0.10 ± 0.01 S/m, and varied by 243% from patient to patient. Perpendicular and parallel conductivities differed by 45%, and the larger values were perpendicular to the pial surface in 47% and parallel in 40% of patients. A perpendicular principal axis was associated with normal, while isotropy and parallel principal axes were linked with epileptogenic lesions by MRI. Electrical conductivities were decreased in patients with cortical dysplasia compared with non-dysplasia etiologies. The electrical conductivity values of freshly excised human brain tissues were approximately 30% of assumed values, varied by over 200% from patient to patient, and had erratic anisotropic and isotropic shapes if the MRI showed a lesion. Understanding brain electrical conductivity and ways to non-invasively measure them are probably necessary to enhance the ability to localize EEG sources from epilepsy surgery patients. PMID:20440549

  11. Electrical safety of conducted electrical weapons relative to requirements of relevant electrical standards.

    Science.gov (United States)

    Panescu, Dorin; Nerheim, Max; Kroll, Mark

    2013-01-01

    TASER(®) conducted electrical weapons (CEW) deliver electrical pulses that can inhibit a person's neuromuscular control or temporarily incapacitate. TASER X26, X26P, and X2 are among CEW models most frequently deployed by law enforcement agencies. The X2 CEW uses two cartridge bays while the X26 and X26P CEWs have only one. The TASER X26P CEW electronic output circuit design is equivalent to that of any one of the two TASER X2 outputs. The goal of this paper was to analyze the nominal electrical outputs of TASER X26, X26P, and X2 CEWs in reference to provisions of several international standards that specify safety requirements for electrical medical devices and electrical fences. Although these standards do not specifically mention CEWs, they are the closest electrical safety standards and hence give very relevant guidance. The outputs of two TASER X26 and two TASER X2 CEWs were measured and confirmed against manufacturer and other published specifications. The TASER X26, X26P, and X2 CEWs electrical output parameters were reviewed against relevant safety requirements of UL 69, IEC 60335-2-76 Ed 2.1, IEC 60479-1, IEC 60479-2, AS/NZS 60479.1, AS/NZS 60479.2 and IEC 60601-1. Prior reports on similar topics were reviewed as well. Our measurements and analyses confirmed that the nominal electrical outputs of TASER X26, X26P and X2 CEWs lie within safety bounds specified by relevant requirements of the above standards.

  12. Assembly for electrical conductivity measurements in the piston cylinder device

    Science.gov (United States)

    Watson, Heather Christine [Dublin, CA; Roberts, Jeffrey James [Livermore, CA

    2012-06-05

    An assembly apparatus for measurement of electrical conductivity or other properties of a sample in a piston cylinder device wherein pressure and heat are applied to the sample by the piston cylinder device. The assembly apparatus includes a body, a first electrode in the body, the first electrode operatively connected to the sample, a first electrical conductor connected to the first electrode, a washer constructed of a hard conducting material, the washer surrounding the first electrical conductor in the body, a second electrode in the body, the second electrode operatively connected to the sample, and a second electrical conductor connected to the second electrode.

  13. Synthesis of novel electrically conducting polymers: Potential conducting Langmuir-Blodgett films and conducting polymers on defined surfaces

    Science.gov (United States)

    Zimmer, Hans

    1993-01-01

    Based on previous results involving thiophene derived electrically conducting polymers in which it was shown that thiophene, 3-substituted thiophenes, furans, and certain oligomers of these compounds showed electrical conductivity after polymerization. The conductivity was in the order of up to 500 S/cm. In addition, these polymers showed conductivity without being doped and most of all they were practically inert toward ambient conditions. They even could be used in aqueous media. With these findings as a guide, a number of 3-long-chain-substituted thiophenes and 1-substituted-3-long-chain substituted pyrrols were synthesized as monomers for potential polymeric electrically conducting Langmuir-Blodgett films.

  14. Local electric conductive property of Si nanowire models

    Directory of Open Access Journals (Sweden)

    Yuji Ikeda

    2012-12-01

    Full Text Available Local electric conductive properties of Si nanowire models are investigated by using two local electric conductivity tensors, σ↔ ext (r⃗ and σ↔ int (r⃗, defined in Rigged QED. It is emphasized that σ↔ int (r⃗ is defined as the response of electric current to the actual electric field at a specific point and does not have corresponding macroscopic physical quantity. For the Si nanowire models, there are regions which show complicated response of electric current density to electric field, in particular, opposite and rotational ones. Local conductivities are considered to be available for the study of a negative differential resistance (NDR, which may be related to this opposite response. It is found that σ↔ int (r⃗ shows quite different pattern from σ↔ ext (r⃗, local electric conductivity defined for the external electric field. The effects of impurities are also studied by using the model including a Ge atom, in terms of the local response to electric field. It is found that the difference from the pristine model is found mainly around the Ge atom.

  15. Percolation of open grain boundaries and change in electrical conductivity

    Science.gov (United States)

    Watanabe, T.

    2016-12-01

    Numerical experiments were conducted on the percolation of open grain boundaries to study the percolation threshold and evolution of connectivity. Open grain boundaries are a major component of pores in crustal materials. Electrical conductivity and permeability are highly sensitive to the connectivity of open brain boundaries. The length and size of the largest cluster was surveyed in a 3D array of cubic grains for various fractions of open grain boundary. For sufficiently large size of array, the percolation threshold was found to be 0.25. If more than 25% of grain boundaries are open, an interconnected network of open grain boundaries is formed. If the aggregate is saturated with brine, the electrical conduction can occur through open grain boundaries. The connectivity of open grain boundaries steeply increases to 1 around the threshold. The electrical conductivity is also expected to increase steeply. The crack density parameter for the percolation threshold is estimated to be 0.1. The large change in electrical conductivity for a small change in crack density parameter is thus expected around crack density parameter of 0.1. Simultaneous measurements on elastic wave velocity and electrical conductivity in a brine saturated granitic rock (Watanabe and Higuchi, 2015) showed a steep change in electrical conductivity around the crack density parameter of 0.1. XCT images show that open grain boundaries are the dominant pores in the sample. The steep change in conductivity must thus be related to the percolation of open grain boundaries.

  16. An experimental investigation of electrical conductivities in biopolymers

    Indian Academy of Sciences (India)

    H Mallick; A Sarkar

    2000-08-01

    Gum arabica obtained from acacia plant is a conducting biopolymer. Experiments are carried out on this natural gum arabica. In the present study TGA, ion transference number, transient ionic current, thermal analysis, frequency and temperature variation of a.c. conductivity, Arrhenius plot and volt–ampere characteristics of specimens are carried out. The total electrical conductivity of these biopolymers are comparable to that of synthetic polymers doped with inorganic salts. The ion transference number of these biopolymers show their superionic nature of electrical conduction. The overall conduction mechanism seems to be protonic in nature rather than electronic one.

  17. Electrochemical relaxation at electrically conducting polymers

    Science.gov (United States)

    Nateghi, M. R.; zarandi, M. B.

    2008-08-01

    In this study, slow relaxation (SR) associated with the electroreduction of polyaniline (PAn) films during polarization to high cathodic potentials was investigated by cyclic voltammetry technique. Anodic voltammetric currents were used as experimental variable to indicate the relaxation occurring in PAn films deposited electrochemically on the Pt electrode surface. The dependence of SR on polymer film thickness, waiting potential, and mobility of the doped anion was investigated. Percolation threshold potential for heteropolyanion doped PAn was estimated to be between 150 and 200 mV depending on polymer thickness on the electrode surface. A new model of the conducting to insulating conversion is described by the percolation theory and mobility gap changes during the process.

  18. Electrochemical relaxation at electrically conducting polymers

    Energy Technology Data Exchange (ETDEWEB)

    Nateghi, M R [Department of Chemistry, Islamic Azad University, Yazd-Branch, Yazd (Iran, Islamic Republic of); Zarandi, M B [Department of physics, Yazd University, Yazd (Iran, Islamic Republic of)

    2008-08-15

    In this study, slow relaxation (SR) associated with the electroreduction of polyaniline (PAn) films during polarization to high cathodic potentials was investigated by cyclic voltammetry technique. Anodic voltammetric currents were used as experimental variable to indicate the relaxation occurring in PAn films deposited electrochemically on the Pt electrode surface. The dependence of SR on polymer film thickness, waiting potential, and mobility of the doped anion was investigated. Percolation threshold potential for heteropolyanion doped PAn was estimated to be between 150 and 200 mV depending on polymer thickness on the electrode surface. A new model of the conducting to insulating conversion is described by the percolation theory and mobility gap changes during the process.

  19. Effect of Ligament Morphology on Electrical Conductivity of Porous Silver

    Science.gov (United States)

    Zuruzi, Abu Samah; Mazulianawati, Majid Siti

    2016-12-01

    We investigate the effect of ligament morphology on electrical conductivity of open cell porous silver (Ag). Porous Ag was formed when silver nanoparticles in an organic phase were annealed at 150°C for durations ranging from 1 to 5 min. Electrical conductivity of porous Ag was about 20% of bulk value after 5 min annealing. Porous Ag was modeled as a collection of Kelvin cell (truncated octahedrons) structures comprised of conjoined conical ligaments and spherical vertices. An analytical expression for electrical conductivity was obtained. Electrical conductivity normal to hexagonal faces of the unit cell was computed. Our model indicates contribution of grain boundary to electrical resistance increases significantly after the first minute of annealing and plateaus thereafter. Using experimental electrical conductivity data as an input, the model suggests that the ratio, n, of surfaces of one half of a conjoined cone ligament is between 0.7 and 1.0. Average deviation from experimentally determined relative electrical conductivity, Δ σ r, was minimal when n = 0.9.

  20. Measurement of Electrical Conductivity for a Biomass Fire

    Directory of Open Access Journals (Sweden)

    Mal Heron

    2008-08-01

    Full Text Available A controlled fire burner was constructed where various natural vegetation species could be used as fuel. The burner was equipped with thermocouples to measure fuel surface temperature and used as a cavity for microwaves with a laboratory quality 2- port vector network analyzer to determine electrical conductivity from S-parameters. Electrical conductivity for vegetation material flames is important for numerical prediction of flashover in high voltage power transmission faults research. Vegetation fires that burn under high voltage transmission lines reduce flashover voltage by increasing air electrical conductivity and temperature. Analyzer determined electrical conductivity ranged from 0.0058 - 0.0079 mho/m for a fire with a maximum temperature of 1240 K.

  1. Electrical conductivity of rocks at high pressures and temperatures

    Science.gov (United States)

    Parkhomenko, E. I.; Bondarenko, A. T.

    1986-01-01

    The results of studies of the electrical conductivity in the most widely distributed types of igneous rocks, at temperatures of up to 1200 C, at atmospheric pressure, and also at temperatures of up to 700 C and at pressures of up to 20,000 kg/sq cm are described. The figures of electrical conductivity, of activaation energy and of the preexponential coefficient are presented and the dependence of these parameters on the petrochemical parameters of the rocks are reviewed. The possible electrical conductivities for the depository, granite and basalt layers of the Earth's crust and of the upper mantle are presented, as well as the electrical conductivity distribution to the depth of 200 to 240 km for different geological structures.

  2. Influential Factors on Deicing Performance of Electrically Conductive Concrete Pavement

    Institute of Scientific and Technical Information of China (English)

    TANG Zuquan; QIAN Jueshi; LI Zhuoqiu; WU Chuanming

    2006-01-01

    The deicing experiment of carbon fiber reinforced electrically conductive concrete (CFRC) slab was conducted in laboratory at first, then the deicing process of CFRC pavement was analyzed by means of finite element method (FEM). At last, based on the energy conservation law and the computing results of finite element method, the influential factors including the setting of electric heating layer, environmental temperature, the thickness of ice, material parameters, and deicing power on deicing performance and energy consumption were discussed.

  3. Effect of Crystallinity on Electrical Conduction in Polypropylene

    Science.gov (United States)

    Ikezaki, Kazuo; Kaneko, Takanobu; Sakakibara, Toshio

    1981-03-01

    The electrical conduction of 20 μm thick polypropylene films with different crystallinities has been studied at 72°C below 400 kV/cm. The field dependence of the current shows that the conduction mechanism in this polymer is ion hopping. The estimated ionic jump distance strongly depends on the polymer crystallinity, and it decreases from 100 Å to 45 Å as the crystallinity increases from 50.5% to 78%. Preheating of samples seriously affects the electrical conduction in polypropylene, so differences in conductivity, activation energy and jump distance obtained by different authors can be explained partly by differences in the thermal history of the samples used.

  4. Electrical Conductivity of the Lower-Mantle Ferropericlase

    Energy Technology Data Exchange (ETDEWEB)

    Lin, J F; Weir, S T; Jackson, D D; Evans, W J; Vohra, Y K; Qiu, W; Yoo, C S

    2007-04-19

    Electrical conductivity of the lower-mantle ferropericlase-(Mg{sub 0.75},Fe{sub 0.25})O has been studied using designer diamond anvils to pressures over one megabar and temperatures up to 500 K. The electrical conductivity of (Mg{sub 0.75},Fe{sub 0.25})O gradually rises by an order of magnitude up to 50 GPa but decreases by a factor of approximately three between 50 to 70 GPa. This decrease in the electrical conductivity is attributed to the electronic high-spin to low-spin transition of iron in ferropericlase. That is, the electronic spin transition of iron results in a decrease in the mobility and/or density of the charge transfer carriers in the low-spin ferropericlase. The activation energy of the low-spin ferropericlase is 0.27 eV at 101 GPa, similar to that of the high-spin ferropericlase at relatively low temperatures. Our results indicate that low-spin ferropericlase exhibits lower electrical conductivity than high-spin ferropericlase, which needs to be considered in future geomagnetic models for the lower mantle. The extrapolated electrical conductivity of the low-spin ferropericlase, together with that of silicate perovskite, at the lower mantle pressure-temperature conditions is consistent with the model electrical conductivity profile of the lower mantle.

  5. Electrostatic Discharge Sensitivity and Electrical Conductivity of Composite Energetic Materials

    Energy Technology Data Exchange (ETDEWEB)

    Michael A. Daniels; Daniel J. Prentice; Chelsea Weir; Michelle L. Pantoya; Gautham Ramachandran; Tim Dallas

    2013-02-01

    Composite energetic material response to electrical stimuli was investigated and a correlation between electrical conductivity and ignition sensitivity was examined. The composites consisted of micrometer particle aluminum combined with another metal, metal oxide, or fluoropolymer. Of the nine tested mixtures, aluminum with copper oxide was the only mixture to ignite by electrostatic discharge with minimum ignition energy (MIE) of 25 mJ and an electrical conductivity of 1246.25 nS; two orders of magnitude higher than the next composite. This study showed a similar trend in MIE for ignition triggered by a discharged spark compared with a thermal hot wire source.

  6. Effect of Fly Ash on the Electrical Conductivity of Concretes

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    The fly ash occasionally has high content of iron oxide and carbon that are good electrical conducting components. This paper investigates the effect of the fly ash used as mineral admixtures on the electrical conductivity of concretes. The electrical properties of concretes using 3 kinds of fly ash with different iron oxide contents have been studied. Experimental results show that at the same fly ash dosage the resistivity of concrete using fly ash with high content of iron oxide is slightly lower than that with low content of iron oxide. However, the concrete resistivity after 14d increases as fly ash dosage increases regardless of iron oxide content in fly ash.

  7. Thermal and Electrical Conductivity Measurements of CDA 510 Phosphor Bronze

    Science.gov (United States)

    Tuttle, James E.; Canavan, Edgar; DiPirro, Michael

    2009-01-01

    Many cryogenic systems use electrical cables containing phosphor bronze wire. While phosphor bronze's electrical and thermal conductivity values have been published, there is significant variation among different phosphor bronze formulations. The James Webb Space Telescope (JWST) will use several phosphor bronze wire harnesses containing a specific formulation (CDA 510, annealed temper). The heat conducted into the JWST instrument stage is dominated by these harnesses, and approximately half of the harness conductance is due to the phosphor bronze wires. Since the JWST radiators are expected to just keep the instruments at their operating temperature with limited cooling margin, it is important to know the thermal conductivity of the actual alloy being used. We describe an experiment which measured the electrical and thermal conductivity of this material between 4 and 295 Kelvin.

  8. Improving electrical conductivity in polycarbonate nanocomposites using highly conductive PEDOT/PSS coated MWCNTs

    KAUST Repository

    Zhou, Jian

    2013-07-10

    We describe a strategy to design highly electrically conductive polycarbonate nanocomposites by using multiwalled carbon nanotubes (MWCNTs) coated with a thin layer of poly(3,4-ethylenedioxythiophene)/ poly(styrenesulfonate), a conductive polymer. We found that this coating method improves the electrical properties of the nanocomposites in two ways. First, the coating becomes the main electrical conductive path. Second, the coating promotes the formation of a percolation network at a low filler concentration (0.3 wt %). To tailor the electrical properties of the conductive polymer coating, we used a polar solvent ethylene glycol, and we can tune the final properties of the nanocomposite by controlling the concentrations of the elementary constituents or the intrinsic properties of the conductive polymer coating. This very flexible technique allows for tailoring the properties of the final product. © 2013 American Chemical Society.

  9. The electrical conduction variation in stained carbon nanotubes

    Science.gov (United States)

    Sun, Shih-Jye; Wei Fan, Jun; Lin, Chung-Yi

    2012-01-01

    Carbon nanotubes become stained from coupling with foreign molecules, especially from adsorbing gas molecules. The charge exchange, which is due to the orbital hybridization, occurred in the stained carbon nanotube induces electrical dipoles that consequently vary the electrical conduction of the nanotube. We propose a microscopic model to evaluate the electrical current variation produced by the induced electrical dipoles in a stained zigzag carbon nanotube. It is found that stronger orbital hybridization strengths and larger orbital energy differences between the carbon nanotube and the gas molecules help increasing the induced electrical dipole moment. Compared with the stain-free carbon nanotube, the induced electrical dipoles suppress the current in the nanotube. In the carbon nanotubes with induced dipoles the current increases as a result of increasing orbital energy dispersion via stronger hybridization couplings. In particular, at a fixed hybridization coupling, the current increases with the bond length for the donor-carbon nanotube but reversely for the acceptor-carbon nanotube.

  10. Measurements of the vertical atmospheric electric field and of the electrical conductivity with stratospheric balloons

    Science.gov (United States)

    Iversen, I. B.; Madsen, M. M.; Dangelo, N.

    1985-01-01

    Measurements of the atmospheric (vertical) electric field with balloons in the stratosphere are reported. The atmospheric electrical conductivity is also measured and the current density inferred. The average vertical current shows the expected variation with universal time and is also seen to be influenced by external (magnetospheric) electric fields.

  11. Effects of Silver Microparticles and Nanoparticles on Thermal and Electrical Characteristics of Electrically Conductive Adhesives

    Science.gov (United States)

    Zulkarnain, M.; Fadzil, M. A.; Mariatti, M.; Azid, I. A.

    2017-08-01

    The effects of different volume fractions of silver (Ag) particles of different size (microsize, 2 μm to 3.5 μm diameter; nanosize, 80 nm diameter) on the thermal and electrical characteristics of epoxy-Ag electrically conductive adhesive (ECA) have been evaluated, as well as hybrid ECAs with both particle sizes at different ratios. Improved thermal and electrical conductivity resulted from the interaction between the particles, as evaluated by analysis of sample morphology. The interaction was altered to improve the conductivity. For both particle sizes, the electrical resistivity showed a transition from insulation to conduction at 6 vol.% Ag. In the hybrid system, the thermal conductivity decreased with increasing microparticle filler ratio. The electrical conductivity of the hybrid composite increased at 50:50 weight ratio.

  12. Lorentz force sigmometry: A contactless method for electrical conductivity measurements

    Science.gov (United States)

    Uhlig, Robert P.; Zec, Mladen; Ziolkowski, Marek; Brauer, Hartmut; Thess, André

    2012-05-01

    The present communication reports a new technique for the contactless measurement of the specific electrical conductivity of a solid body or an electrically conducting fluid. We term the technique "Lorentz force sigmometry" where the neologism "sigmometry" is derived from the Greek letter sigma, often used to denote the electrical conductivity. Lorentz force sigmometry (LoFoS) is based on similar principles as the traditional eddy current testing but allows a larger penetration depth and is less sensitive to variations in the distance between the sensor and the sample. We formulate the theory of LoFoS and compute the calibration function which is necessary for determining the unknown electrical conductivity from measurements of the Lorentz force. We conduct a series of experiments which demonstrate that the measured Lorentz forces are in excellent agreement with the numerical predictions. Applying this technique to an aluminum sample with a known electrical conductivity of σAl=20.4MS/m and to a copper sample with σCu=57.92MS/m we obtain σAl=21.59MS/m and σCu=60.08MS/m, respectively. This demonstrates that LoFoS is a convenient and accurate technique that may find application in process control and thermo-physical property measurements for solid and liquid conductors.

  13. Mechanically stiff, electrically conductive composites of polymers and carbon nanotubes

    Science.gov (United States)

    Worsley, Marcus A.; Kucheyev, Sergei O.; Baumann, Theodore F.; Kuntz, Joshua D.; Satcher, Jr., Joe H.; Hamza, Alex V.

    2015-07-21

    Using SWNT-CA as scaffolds to fabricate stiff, highly conductive polymer (PDMS) composites. The SWNT-CA is immersing in a polymer resin to produce a SWNT-CA infiltrated with a polymer resin. The SWNT-CA infiltrated with a polymer resin is cured to produce the stiff and electrically conductive composite of carbon nanotube aerogel and polymer.

  14. Establishing a conversion factor between electrical conductivity and ...

    African Journals Online (AJOL)

    2015-07-04

    Jul 4, 2015 ... Keywords: EC, electrical conductivity, mine water, TDS, total dissolved solids, SA, South Africa ... TDS is used to calculate the volume of sludge that will be generated by treating ... which the conductivity method is but one option (DWA, 2012). Several ..... drop correlating with a period of extensive rainfalls.

  15. Model for electrical conductivity of muscle meat during Ohmic heating

    NARCIS (Netherlands)

    Sman, van der R.G.M.

    2017-01-01

    A model is presented for predicting the electrical conductivity of muscle meat, which can be used for the evaluation of Ohmic heating. The model computes the conductivity as a function of composition, temperature and microstructure. The muscle meat is thought to be composed of protein, water, salt.

  16. Electrical conductivity in the precambrian lithosphere of western canada

    Science.gov (United States)

    Boerner; Kurtz; Craven; Ross; Jones; Davis

    1999-01-29

    The subcrustal lithosphere underlying the southern Archean Churchill Province (ACP) in western Canada is at least one order of magnitude more electrically conductive than the lithosphere beneath adjacent Paleoproterozoic crust. The measured electrical properties of the lithosphere underlying most of the Paleoproterozoic crust can be explained by the conductivity of olivine. Mantle xenolith and geological mapping evidence indicate that the lithosphere beneath the southern ACP was substantially modified as a result of being trapped between two nearly synchronous Paleoproterozoic subduction zones. Tectonically induced metasomatism thus may have enhanced the subcrustal lithosphere conductivity of the southern ACP.

  17. Electrical conductivity of Cu-Ag in situ filamentary composites

    Institute of Scientific and Technical Information of China (English)

    NING Yuan-tao; ZHANG Xiao-hui; WU Yue-jun

    2007-01-01

    The electrical conductivity of Cu-10Ag in situ filamentary composite was studied during the deformation and annealing processes. The dependence of electrical resistivity of the deformed composites on the true strain presents a two-stage change with increase of the true strain. The intermediate heat treatment and the stabilized annealing treatment to the deformed composite promote the separation of Ag precipitate, and increase the electrical conductivity. The maximum conductivity of the composite experienced the stabilizing heat treatment can reach about 97% IACS with σb≥400 MPa at 550 ℃ annealing, and reach about 70% IACS with σb≥1 250 MPa at 300 ℃ annealing. The corresponded strength of the composite was reported. The microstructure reason for the changes of the conductivity was discussed.

  18. Thermal conductivity, electrical conductivity and specific heat of copper-carbon fiber composite

    Science.gov (United States)

    Kuniya, Keiichi; Arakawa, Hideo; Kanai, Tsuneyuki; Chiba, Akio

    1988-01-01

    A new material of copper/carbon fiber composite is developed which retains the properties of copper, i.e., its excellent electrical and thermal conductivity, and the property of carbon, i.e., a small thermal expansion coefficient. These properties of the composite are adjustable within a certain range by changing the volume and/or the orientation of the carbon fibers. The effects of carbon fiber volume and arrangement changes on the thermal and electrical conductivity, and specific heat of the composite are studied. Results obtained are as follows: the thermal and electrical conductivity of the composite decrease as the volume of the carbon fiber increases, and were influenced by the fiber orientation. The results are predictable from a careful application of the rule of mixtures for composites. The specific heat of the composite was dependent, not on fiber orientation, but on fiber volume. In the thermal fatigue tests, no degradation in the electrical conductivity of this composite was observed.

  19. Fabrication of highly conductive carbon nanotube fibers for electrical application

    Science.gov (United States)

    Guo, Fengmei; Li, Can; Wei, Jinquan; Xu, Ruiqiao; Zhang, Zelin; Cui, Xian; Wang, Kunlin; Wu, Dehai

    2015-09-01

    Carbon nanotubes (CNTs) have great potential for use as electrical wires because of their outstanding electrical and mechanical properties. Here, we fabricate lightweight CNT fibers with electrical conductivity as high as that of stainless steel from macroscopic CNT films by drawing them through diamond wire-drawing dies. The entangled CNT bundles are straightened by suffering tension, which improves the alignment of the fibers. The loose fibers are squeezed by the diamond wire-drawing dies, which reduces the intertube space and contact resistance. The CNT fibers prepared by drawing have an electrical conductivity as high as 1.6 × 106 s m-1. The fibers are very stable when kept in the air and under cyclic tensile test. A prototype of CNT motor is demonstrated by replacing the copper wires with the CNT fibers.

  20. Laboratory-based electrical conductivity at Martian mantle conditions

    Science.gov (United States)

    Verhoeven, Olivier; Vacher, Pierre

    2016-12-01

    Information on temperature and composition of planetary mantles can be obtained from electrical conductivity profiles derived from induced magnetic field analysis. This requires a modeling of the conductivity for each mineral phase at conditions relevant to planetary interiors. Interpretation of iron-rich Martian mantle conductivity profile therefore requires a careful modeling of the conductivity of iron-bearing minerals. In this paper, we show that conduction mechanism called small polaron is the dominant conduction mechanism at temperature, water and iron content conditions relevant to Mars mantle. We then review the different measurements performed on mineral phases with various iron content. We show that, for all measurements of mineral conductivity reported so far, the effect of iron content on the activation energy governing the exponential decrease in the Arrhenius law can be modeled as the cubic square root of the iron content. We recast all laboratory results on a common generalized Arrhenius law for iron-bearing minerals, anchored on Earth's mantle values. We then use this modeling to compute a new synthetic profile of Martian mantle electrical conductivity. This new profile matches perfectly, in the depth range [100,1000] km, the electrical conductivity profile recently derived from the study of Mars Global Surveyor magnetic field measurements.

  1. Electrical conductivity of rigid polyurethane foam at high temperature

    Science.gov (United States)

    Johnson, R. T., Jr.

    1982-08-01

    The electrical conductivity of rigid polyurethane foam, used for electronic encapsulation, was measured during thermal decomposition to 3400 C. At higher temperatures the conductance continues to increase. With pressure loaded electrical leads, sample softening results in eventual contact between electrodes which produces electrical shorting. Air and nitrogen environments show no significant dependence of the conductivity on the atmosphere over the temperature range. The insulating characteristics of polyurethane foam below approx. 2700 C are similar to those for silicone based materials used for electronic case housings and are better than those for phenolics. At higher temperatures (greater than or equal to 2700 C) the phenolics appear to be better insulators to approx. 5000 C and the silicones to approx. 6000 C. It is concluded that the Sylgard 184/GMB encapsulant is a significantly better insulator at high temperature than the rigid polyurethane foam.

  2. Electrical conduction mechanism in GeSeSb chalcogenide glasses

    Indian Academy of Sciences (India)

    Vandana Kumari; Anusaiya Kaswan; D Patidar; Kananbala Sharma; N S Saxena

    2016-02-01

    Electrical conductivity of chalcogenide glassy system Ge$_{30−x}$Se$_{70}$Sb$_{x}$ ( = 10, 15, 20 and 25) prepared by melt quenching has been determined at different temperatures in bulk through the $I$–$V$ characteristic curves. It is quite evident from results that Poole–Frenkel conduction mechanisms hold good for conduction in these glasses in a given temperature range. The variation in electrical conductivity with composition was attributed to the Se–Sb bond concentration in the Se–Ge–Sb system. Results indicated that Ge$_5$Se$_{70}$Sb$_{25}$ showed the minimum resistance. In view of this the composition Ge$_5$Se$_{70}$Sb$_{25}$ may be coined as ‘critical composition’ in the proposed series. Also the activation energies of conduction of these glassy alloys have been calculated in higher and lower temperature range using the Arrhenius equation.

  3. Electrical Conductivity of HgTe at High Temperatures

    Science.gov (United States)

    Li, C.; Lehoczky, S. L.; Su, C.-H.; Scripa, R. N.

    2004-01-01

    The electrical conductivity of HgTe was measured using a rotating magnetic field method from 300 K to the melting point (943 K). A microscopic theory for electrical conduction was used to calculate the expected temperature dependence of the HgTe conductivity. A comparison between the measured and calculated conductivities was used to obtain the estimates of the temperature dependence of Gamma(sub 6)-Gamma(sub 8) energy gap from 300 K to 943 K. The estimated temperature coefficient for the energy gap was comparable to the previous results at lower temperatures (less than or equal to 300 K). A rapid increase in the conductivity just above 300 K and a subsequent decrease at 500 K is attributed to band crossover effects. This paper describes the experimental approach and some of the theoretical calculation details.

  4. Computational analysis of electrical conduction in hybrid nanomaterials with embedded non-penetrating conductive particles

    Science.gov (United States)

    Cai, Jizhe; Naraghi, Mohammad

    2016-08-01

    In this work, a comprehensive multi-resolution two-dimensional (2D) resistor network model is proposed to analyze the electrical conductivity of hybrid nanomaterials made of insulating matrix with conductive particles such as CNT reinforced nanocomposites and thick film resistors. Unlike existing approaches, our model takes into account the impenetrability of the particles and their random placement within the matrix. Moreover, our model presents a detailed description of intra-particle conductivity via finite element analysis, which to the authors’ best knowledge has not been addressed before. The inter-particle conductivity is assumed to be primarily due to electron tunneling. The model is then used to predict the electrical conductivity of electrospun carbon nanofibers as a function of microstructural parameters such as turbostratic domain alignment and aspect ratio. To simulate the microstructure of single CNF, randomly positioned nucleation sites were seeded and grown as turbostratic particles with anisotropic growth rates. Particle growth was in steps and growth of each particle in each direction was stopped upon contact with other particles. The study points to the significant contribution of both intra-particle and inter-particle conductivity to the overall conductivity of hybrid composites. Influence of particle alignment and anisotropic growth rate ratio on electrical conductivity is also discussed. The results show that partial alignment in contrast to complete alignment can result in maximum electrical conductivity of whole CNF. High degrees of alignment can adversely affect conductivity by lowering the probability of the formation of a conductive path. The results demonstrate approaches to enhance electrical conductivity of hybrid materials through controlling their microstructure which is applicable not only to carbon nanofibers, but also many other types of hybrid composites such as thick film resistors.

  5. Corrosion-protective coatings from electrically conducting polymers

    Science.gov (United States)

    Thompson, Karen Gebert; Bryan, Coleman J.; Benicewicz, Brian C.; Wrobleski, Debra A.

    1991-01-01

    In a joint effort between NASA Kennedy and LANL, electrically conductive polymer coatings were developed as corrosion protective coatings for metal surfaces. At NASA Kennedy, the launch environment consist of marine, severe solar, and intermittent high acid and/or elevated temperature conditions. Electrically conductive polymer coatings were developed which impart corrosion resistance to mild steel when exposed to saline and acidic environments. Such coatings also seem to promote corrosion resistance in areas of mild steel where scratches exist in the protective coating. Such coatings appear promising for many commercial applications.

  6. How Can Soil Electrical Conductivity Measurements Control Soil Pollution?

    Directory of Open Access Journals (Sweden)

    Mohammad Reza

    2010-10-01

    Full Text Available Soil pollution results from the build up of contaminants, toxic compounds, radioactive materials, salts, chemicals and cancer-causing agents. The most common soil pollutants are hydrocarbons, heavy metals (cadmium, lead, chromium, copper, zinc, mercury and arsenic, herbicides, pesticides, oils, tars, PCBs and dioxins. Soil Electrical Conductivity (EC is one of the soil physical properties w hich have a good relationship with the other soil characteristics. As measuring soil electrical conductivity is easier, less expensive and faster than other soil properties measurements, using a detector that can do on the go soil EC measurements is a good tool for obtaining useful information about soil pollution condition.

  7. Electrical conductivity measurements on silicate melts using the loop technique

    Science.gov (United States)

    Waff, H. S.

    1976-01-01

    A new method is described for measurement of the electrical conductivity of silicate melts under controlled oxygen partial pressure at temperatures to 1550 C. The melt samples are suspended as droplets on platinum-rhodium loops, minimizing iron loss from the melt due to alloying with platinum, and providing maximum surface exposure of the melt to the oxygen-buffering gas atmosphere. The latter provides extremely rapid equilibration of the melt with the imposed oxygen partial pressure. The loop technique involves a minimum of setup time and cost, provides reproducible results to within + or - 5% and is well suited to electrical conductivity studies on silicate melts containing redox cations.

  8. The effect of water on the electrical conductivity of olivine.

    Science.gov (United States)

    Wang, Duojun; Mookherjee, Mainak; Xu, Yousheng; Karato, Shun-ichiro

    2006-10-26

    It is well known that water (as a source of hydrogen) affects the physical and chemical properties of minerals--for example, plastic deformation and melting temperature--and accordingly plays an important role in the dynamics and geochemical evolution of the Earth. Estimating the water content of the Earth's mantle by direct sampling provides only a limited data set from shallow regions (olivine, the most abundant mineral in the Earth's mantle. Here we report a laboratory study of the dependence of the electrical conductivity of olivine aggregates on water content at high temperature and pressure. The electrical conductivity of synthetic polycrystalline olivine was determined from a.c. impedance measurements at a pressure of 4 GPa for a temperature range of 873-1,273 K for water contents of 0.01-0.08 wt%. The results show that the electrical conductivity is strongly dependent on water content but depends only modestly on temperature. The water content dependence of conductivity is best explained by a model in which electrical conduction is due to the motion of free protons. A comparison of the laboratory data with geophysical observations suggests that the typical oceanic asthenosphere contains approximately 10(-2) wt% water, whereas the water content in the continental upper mantle is less than approximately 10(-3) wt%.

  9. Self-healable electrically conducting wires for wearable microelectronics.

    Science.gov (United States)

    Sun, Hao; You, Xiao; Jiang, Yishu; Guan, Guozhen; Fang, Xin; Deng, Jue; Chen, Peining; Luo, Yongfeng; Peng, Huisheng

    2014-09-01

    Electrically conducting wires play a critical role in the advancement of modern electronics and in particular are an important key to the development of next-generation wearable microelectronics. However, the thin conducting wires can easily break during use, and the whole device fails to function as a result. Herein, a new family of high-performance conducting wires that can self-heal after breaking has been developed by wrapping sheets of aligned carbon nanotubes around polymer fibers. The aligned carbon nanotubes offer an effective strategy for the self-healing of the electric conductivity, whereas the polymer fiber recovers its mechanical strength. A self-healable wire-shaped supercapacitor fabricated from a wire electrode of this type maintained a high capacitance after breaking and self-healing.

  10. Estimating Upper Mantle Hydration from In Situ Electrical Conductivity

    Science.gov (United States)

    Behrens, J.; Constable, S.; Heinson, G.; Everett, M.; Weiss, C.; Key, K.

    2004-12-01

    The electrical conductivity of 35-40 Ma Pacific plate has been measured in situ; one robust result is the presence of bulk anisotropy in the lithospheric upper mantle. We interpret this anisotropy to be a result of hydrothermal circulation into the upper mantle along spreading-ridge-parallel normal faults: the associated zones of serpentinized peridotite provide the pathways of enhanced electrical conductivity required by the data. Our modeling bounds the range of possible anisotropic ratios, which are then used to estimate the amount of water required to serpentinize the requisite amounts of peridotite. These data sets, however, do not indicate anisotropy in the bulk conductivity of the crust, nor in the asthenospheric mantle. This second point is significant, as recent measurements of sub-continental asthenospheric conductivity have been interpreted to indicate anisotropy aligned with present plate motion, with the diffusion of hydrogen through olivine advanced as an explanation.

  11. Measurement of electrical conductivity of micron-scale metallic wires

    Institute of Scientific and Technical Information of China (English)

    JU Bing-feng; JU Yang

    2006-01-01

    Electrical conductivities of micron-scale aluminum wires were quantitatively measured by a four-point atomic force microscope (AFM) probe. This technique is a combination of the principles of the four-point probe method and standard AFM. This technique was applied to the 99.999% aluminum wires with 350 nm thickness and different widths of 5.0,25.0 and 50.0 μm. Since the small dimensions of the wires,the geometrical effects were discussed in details. Experiment results show that the four-point AFM probe is mechanically flexible and robust. The four-point AFM probe technique is capable of measuring surface topography together with local electrical conductivity simultaneously. The repeatable measurements indicate that this technique could be used for fast in-situ electrical properties characterization of sensors and microelectromechanical system devices.

  12. Electric Conductivity from the solution of the Relativistic Boltzmann Equation

    CERN Document Server

    Puglisi, A; Greco, V

    2014-01-01

    We present numerical results of electric conductivity $\\sigma_{el}$ of a fluid obtained solving the Relativistic Transport Boltzmann equation in a box with periodic boundary conditions. We compute $\\sigma_{el}$ using two methods: the definition itself, i.e. applying an external electric field, and the evaluation of the Green-Kubo relation based on the time evolution of the current-current correlator. We find a very good agreement between the two methods. We also compare numerical results with analytic formulas in Relaxation Time Approximation (RTA) where the relaxation time for $\\sigma_{el}$ is determined by the transport cross section $\\sigma_{tr}$, i.e. the differential cross section weighted with the collisional momentum transfer. We investigate the electric conductivity dependence on the microscopic details of the 2-body scatterings: isotropic and anisotropic cross-section, and massless and massive particles. We find that the RTA underestimates considerably $\\sigma_{el}$; for example at screening masses $...

  13. On the flow dependency of the electrical conductivity of blood

    NARCIS (Netherlands)

    Hoetink, AE; Faes, TJC; Visser, KR; Heethaar, RM

    Experiments presented in the literature show that the electrical conductivity of flowing blood depends on flow velocity. The aim of this study is to extend the Maxwell-Fricke theory, developed for a dilute suspension of ellipsoidal particles in an electrolyte, to explain this flow dependency of the

  14. On the flow dependency of the electrical conductivity of blood

    NARCIS (Netherlands)

    Hoetink, AE; Faes, TJC; Visser, KR; Heethaar, RM

    2004-01-01

    Experiments presented in the literature show that the electrical conductivity of flowing blood depends on flow velocity. The aim of this study is to extend the Maxwell-Fricke theory, developed for a dilute suspension of ellipsoidal particles in an electrolyte, to explain this flow dependency of the

  15. Electrical Conductivity of milk: ability to predict mastitis status

    NARCIS (Netherlands)

    Norberg, E.; Hogeveen, H.; Korsgaard, I.R.; Friggens, N.C.; Sloth, K.H.M.N.; Lovendahl, P.

    2004-01-01

    Electrical conductivity (EC) of milk has been introduced as an indicator trait for mastitis over the last decade, and it may be considered as a potential trait in a breeding program where selection for improved udder health is included. In this study, various EC traits were investigated for their as

  16. Electrical Conductivity, Thermal Behavior, and Seebeck Coefficient of Conductive Films for Printed Thermoelectric Energy Harvesting Systems

    Science.gov (United States)

    Ankireddy, Krishnamraju; Menon, Akanksha K.; Iezzi, Brian; Yee, Shannon K.; Losego, Mark D.; Jur, Jesse S.

    2016-11-01

    Printed electronics is being explored as a rapid, facile means for manufacturing thermoelectric generators (TEGs) that can recover useful electrical energy from waste heat. This work examines the relevant electrical conductivity, thermal resistance, thermovoltage, and Seebeck coefficient of printed films for use in such printed flexible TEGs. The thermoelectric performance of TEGs printed using commercially relevant nickel, silver, and carbon inks is evaluated. The microstructure of the printed films is investigated to better understand why the electrical conductivity and Seebeck coefficient are degraded. Thermal conduction is shown to be relatively insensitive to the type of metalized coating and nearly equivalent to that of an uncoated polymer substrate. Of the commercially available conductive ink materials examined, carbon-nickel TEGs are shown to exhibit the highest thermovoltage, with a value of 10.3 μV/K. However, silver-nickel TEGs produced the highest power generation of 14.6 μW [from 31 junctions with temperature difference (Δ T) of 113°C] due to their low electrical resistance. The voltage generated from the silver-nickel TEG was stable under continuous operation at 275°C for 3 h. We have also demonstrated that, after a year of storage in ambient conditions, these devices retain their performance. Notably, the electrical conductivity and Seebeck coefficient measured for individual materials were consistent with those measured from actual printed TEG device structures, validating the need for further fundamental materials characterization to accelerate flexible TEG device optimization.

  17. Modelling electrical conductivity of groundwater using an adaptive neuro-fuzzy inference system

    NARCIS (Netherlands)

    B. Tutmez (Bulent); Z. Hatipoglu (Z.); U. Kaymak (Uzay)

    2006-01-01

    textabstractElectrical conductivity is an important indicator for water quality assessment. Since the composition of mineral salts affects the electrical conductivity of groundwater, it is important to understand the relationships between mineral salt composition and electrical conductivity. In this

  18. Electrical conductivity anomalies associated with circular lunar maria

    Science.gov (United States)

    Dyal, P.; Daily, W. D.

    1979-01-01

    A strong anisotropy is observed in magnetic field fluctuations measured by the Lunokhod 2 magnetometer located on the eastern edge of Mare Serenitatis. This anisotropy can be explained by a regional anomaly in the subsurface electrical conductivity distribution associated with the mare similar to the proposed conductivity anomaly associated with Mare Imbrium. The Serenitatis magnetic field anisotropy is compared to the field fluctuation measured by the Apollo 16 magnetometer 1100 km to the south, and this comparison indicates that the subsurface conductivity distribution can be modeled by a nonconducting layer in the lunar lithosphere which is 150 km thick beneath the highlands and 300 km thick beneath Serenitatis. The decrease in electrical conductivity of the upper mantle beneath the mare may result from lower temperatures due to transport of thermal energy and radioactive heat sources to the surface during mare flooding. This proposed anomaly, along with that proposed for Mare Imbrium, strengthens the possibility of regional anomalies in electrical conductivity associated with all circular lunar maria.

  19. Composite yarns of multiwalled carbon nanotubes with metallic electrical conductivity.

    Science.gov (United States)

    Randeniya, Lakshman K; Bendavid, Avi; Martin, Philip J; Tran, Canh-Dung

    2010-08-16

    Unique macrostructures known as spun carbon-nanotube fibers (CNT yarns) can be manufactured from vertically aligned forests of multiwalled carbon nanotubes (MWCNTs). These yarns behave as semiconductors with room-temperature conductivities of about 5 x 10(2) S cm(-1). Their potential use as, for example, microelectrodes in medical implants, wires in microelectronics, or lightweight conductors in the aviation industry has hitherto been hampered by their insufficient electrical conductivity. In this Full Paper, the synthesis of metal-CNT composite yarns, which combine the unique properties of CNT yarns and nanocrystalline metals to obtain a new class of materials with enhanced electrical conductivity, is presented. The synthesis is achieved using a new technique, self-fuelled electrodeposition (SFED), which combines a metal reducing agent and an external circuit for transfer of electrons to the CNT surface, where the deposition of metal nanoparticles takes place. In particular, the Cu-CNT and Au-CNT composite yarns prepared by this method have metal-like electrical conductivities (2-3 x 10(5) S cm(-1)) and are mechanically robust against stringent tape tests. However, the tensile strengths of the composite yarns are 30-50% smaller than that of the unmodified CNT yarn. The SFED technique described here can also be used as a convenient means for the deposition of metal nanoparticles on solid electrode supports, such as conducting glass or carbon black, for catalytic applications.

  20. Observations and parameterization of the stratospheric electrical conductivity

    Science.gov (United States)

    Hu, Hua; Holzworth, Robert H.

    1996-12-01

    Simultaneous in situ measurements of the stratospheric electrical conductivity, made from multiple balloon platforms during the 1992-1993 Extended Life Balloon-Borne Observatories (ELBBO) experiment, have yielded the most comprehensive data set on the stratospheric electrical conductivity. The ELBBO project involved launches of five superpressure balloons into the stratosphere from Dunedin, New Zealand, beginning November 10, 1992, and lasting through March 18, 1993. Most of the balloons floated at a constant altitude of 26 km for over 3 months, covered a wide range of latitudes from the South Pole to 28°S, and circled around the southern hemisphere several times. On average, the positive polar conductivity (conductivity of positive ions alone) was about 15% higher than that of the negative conductivity, suggesting that differences may exist between the mobilities of positive and negative ions. Data from each polarity of polar conductivity also indicate persistent, apparently organized, short-term and localized variations, with amplitude within 30% of the mean value. In corrected geomagnetic (CGM) coordinates the conductivity variations were found to be a function of latitude but not of longitude. The total conductivity can increase 150% from low latitude to high latitude, and does remain nearly constant at latitudes above 55° (namely, the cosmic ray knee latitude). Calculations based on ionization theory demonstrate that the latitudinal variations in the conductivity measurements were mainly due to the latitudinal variations in incident galactic cosmic ray intensity, with only little effect from the air temperature variations. The calculations shown here also suggest that small ions (as opposed to large ions) provide the main contribution to the stratospheric conductivity. The comparisons between conductivity measurements and models show that commonly used models can underestimate the latitudinal variation by a factor of 2. In this paper the stratospheric

  1. Consequences of electrical conductivity in an orb spider's capture web

    Science.gov (United States)

    Vollrath, Fritz; Edmonds, Donald

    2013-12-01

    The glue-coated and wet capture spiral of the orb web of the garden cross spider Araneus diadematus is suspended between the dry silk radial and web frame threads. Here, we experimentally demonstrate that the capture spiral is electrically conductive because of necks of liquid connecting the droplets even if the thread is stretched. We examine how this conductivity of the capture spiral may lead to entrapment of charged airborne particles such as pollen, spray droplets and even insects. We further describe and model how the conducting spiral will also locally distort the Earth's ambient electric field. Finally, we examine the hypothesis that such distortion could be used by potential prey to detect the presence of a web but conclude that any effect would probably be too small to allow an insect to take evasive action.

  2. Nonlinear Conductivity of a Holographic Superconductor Under Constant Electric Field

    CERN Document Server

    Zeng, Hua-Bi; Fan, Zheyong; Chen, Chiang-Mei

    2016-01-01

    The dynamics of a two-dimensional superconductor under a constant electric field $E$ is studied by using the gauge/gravity correspondence. The pair breaking current induced by $E$ first increases to a peak value and then decreases to a constant value at late time, where the superconducting gap goes to zero, corresponding to a normal conducting phase. The peak value of the current is found to increase linearly with respect to the electric field. Moreover, the nonlinear conductivity, defined as an average of the conductivity in the superconducting phase, scales as $\\sim E^{-2/3}$ for large $E$ when the system is close to the critical temperature, which agrees with predictions from solving the time dependent Ginzburg-Landau equation.

  3. Electrical conductivity and dielectric properties of potassium sulfamate single crystals

    Energy Technology Data Exchange (ETDEWEB)

    Kumar, A.S.; Iype, L.; Rajesh, R. [School of Pure and Applied Physics, Mahatma Gandhi University, Kottayam (India); Varughese, G. [Department of Physics, Catholicate College, Pathanamthitta, Kerala (India); Joseph, G. [Department of Physics, Sacred Heart College, Thevera, Cochin, Kerala (India); Louis, G. [Department of Physics, Cochin University of Science and Technology, Cochin (India)

    2011-10-15

    Single crystals of potassium sulfamate are grown by the method of slow evaporation at constant temperature. AC electrical conductivity of potassium sulfamate is measured in the temperature range 300-430 K and in the frequency region between 100 Hz and 3 MHz along the a, b and c-axes. Complex impedance spectroscopy is used to investigate the frequency response of the electrical properties of the potassium sulfamate single crystal. Temperature variation of AC conductivity and dielectric measurements show a slope change around 345 K for both heating and cooling run and this anomaly is attributed as phase transition, which is well supported by the DSC measurements. Value of loss tangent in the temperature region 330-400 K is found to be very low. Activation energies for the conduction process are calculated along the a, b and c-axes. (copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  4. Evaluation of electrical transverse conductivity of the unidirectional CFRP

    Science.gov (United States)

    Khebbab, Mohamed; Feliachi, Mouloud; El Hadi Latreche, M.

    2016-01-01

    In this paper, a technique for the calculation of the electrical transverse conductivity of unidirectional carbon fiber reinforced polymer (CFRP), based on Markov chains, is proposed. Inspired by the microscopic cross-sectional structure of CFRP, an electrical percolation system is constructed. The effective transverse conductivity is derived from an equivalent conductance of the percolation network. To achieve such a determination, a notion of escape probability associated to absorbing Markov chains is applied. The obtained results are compared with those given by percolation theory; and also with published experimental data. Our results are shown to be in good agreement with the references. Contribution to the topical issue "Numelec 2015 - Elected submissions", edited by Adel Razek

  5. Electrical conductivity in two mixed-valence liquids.

    Science.gov (United States)

    Yao, Wenzhi; Kelley, Steven P; Rogers, Robin D; Vaid, Thomas P

    2015-06-01

    Two different room-temperature liquid systems were investigated, both of which conduct a DC electrical current without decomposition or net chemical transformation. DC electrical conductivity is possible in both cases because of the presence of two different oxidation states of a redox-active species. One system is a 1 : 1 molar mixture of n-butylferrocene (BuFc) and its cation bis(trifluoromethane)sulfonimide salt, [BuFc(+)][NTf2(-)], while the other is a 1 : 1 molar mixture of TEMPO and its cation bis(trifluoromethane)sulfonimide salt, [TEMPO(+)][NTf2(-)]. The TEMPO-[TEMPO(+)][NTf2(-)] system is notable in that it is an electrically conducting liquid in which the conductivity originates from an organic molecule in two different oxidation states, with no metals present. Single-crystal X-ray diffraction of [TEMPO(+)][NTf2(-)] revealed a complex structure with structurally different cation-anion interactions for cis- and trans [NTf2(-)] conformers. The electron transfer self-exchange rate constant for BuFc/BuFc(+) in CD3CN was determined by (1)H NMR spectroscopy to be 5.4 × 10(6) M(-1) s(-1). The rate constant allowed calculation of an estimated electrical conductivity of 7.6 × 10(-5)Ω(-1) cm(-1) for BuFc-[BuFc(+)][NTf2(-)], twice the measured value of 3.8 × 10(-5)Ω(-1) cm(-1). Similarly, a previously reported self-exchange rate constant for TEMPO/TEMPO(+) in CH3CN led to an estimated conductivity of 1.3 × 10(-4)Ω(-1) cm(-1) for TEMPO-[TEMPO(+)][NTf2(-)], a factor of about 3 higher than the measured value of 4.3 × 10(-5)Ω(-1) cm(-1).

  6. Image theory for electric dipoles above a conducting anisotropic earth

    Science.gov (United States)

    Mahmoud, S. F.

    1984-07-01

    New image representations for vertical electric dipoles (VED) above an imperfectly conducting and axially anisotropic earth are developed. These include multidiscrete images at different depths below the air-earth interface and multipole image sources. It is shown that, in contrast with the available image representations in the literature, the developed ones predict the correct behavior of the fields in the far zone along the earth's surface. Extension to a layered earth's model is made. The theory is also extended to the horizontal electric dipole with similar conclusions to the case of the vertical dipole.

  7. Durable Microstructured Surfaces: Combining Electrical Conductivity with Superoleophobicity.

    Science.gov (United States)

    Pan, Zihe; Wang, Tianchang; Sun, Shaofan; Zhao, Boxin

    2016-01-27

    In this study, electrically conductive and superoleophobic polydimethylsiloxane (PDMS) has been fabricated through embedding Ag flakes (SFs) and Ag nanowires (SNWs) into microstructures of the trichloroperfluorooctylsilane (FDTS)-blended PDMS elastomer. Microstructured PDMS surfaces became conductive at the percolation surface coverage of 3.0 × 10(-2) mg/mm(2) for SFs; the highest conductivity was 1.12 × 10(5) S/m at the SFs surface coverage of 6.0 × 10(-2) mg/mm(2). A significant improvement of the conductivity (increased 3 times at the SNWs fraction of 11%) was achieved by using SNWs to replace some SFs because of the conductive pathways from the formed SNWs networks and its connections with SFs. These conductive fillers bonded strongly with microstructured FDTS-blended PDMS and retained surface properties under the sliding preload of 8.0 N. Stretching tests indicated that the resistance increased with the increasing strains and returned to its original state when the strain was released, showing highly stretchable and reversible electrical properties. Compared with SFs embedded surfaces, the resistances of SFs/SNWs embedded surfaces were less dependent on the strain because of bridging effect of SNWs. The superoleophobicity was achieved by the synergetic effect of surface modification through blending FDTS and the microstructures transferred from sand papers. The research findings demonstrate a simple approach to make the insulating elastomer to have the desired surface oleophobicity and electrical conductivity and help meet the needs for the development of conductive devices with microstructures and multifunctional properties.

  8. Thermal and Electrical Conductivity Probe for Phoenix Mars Lander

    Science.gov (United States)

    2007-01-01

    NASA's Phoenix Mars Lander will assess how heat and electricity move through Martian soil from one spike or needle to another of a four-spike electronic fork that will be pushed into the soil at different stages of digging by the lander's Robotic Arm. The four-spike tool, called the thermal and electrical conductivity probe, is in the middle-right of this photo, mounted near the end of the arm near the lander's scoop (upper left). In one type of experiment with this tool, a pulse of heat will be put into one spike, and the rate at which the temperature rises on the nearby spike will be recorded, along with the rate at which the heated spike cools. A little bit of ice can make a big difference in how well soil conducts heat. Similarly, soil's electrical conductivity -- also tested with this tool -- is a sensitive indicator of moisture in the soil. This device adapts technology used in soil-moisture gauges for irrigation-control systems. The conductivity probe has an additional role besides soil analysis. It will serve as a hunidity sensor when held in the air.

  9. Electrically conducting nanobiocomposites using carbon nanotubes and collagen waste fibers

    Energy Technology Data Exchange (ETDEWEB)

    Meiyazhagan, Ashokkumar; Thangavel, Saravanamoorthy [Advanced Materials Laboratory, Center for Leather Apparel & Accessories Development, Central Leather Research Institute (Council of Scientific and Industrial Research), Adyar, Chennai 600020 (India); Hashim, Daniel P.; Ajayan, Pulickel M. [Department of Materials Science and NanoEngineering, Rice University, Houston, TX 77005 (United States); Palanisamy, Thanikaivelan, E-mail: thanik8@yahoo.com [Advanced Materials Laboratory, Center for Leather Apparel & Accessories Development, Central Leather Research Institute (Council of Scientific and Industrial Research), Adyar, Chennai 600020 (India)

    2015-05-01

    Electrically conducting hybrid biocomposite films were prepared using a simple and cost-effective method by incorporating different types of carbon nanotubes (XCNTs) viz., few walled carbon nanotube (FWCNT) and boron doped carbon nanotube (BCNT) into biopolymers. Collagen extracted from animal skin wastes was blended with guar gum and XCNTs in varying proportions to form flexible and electrically conducting hybrid films. We found that the electrical conductivity of both types of hybrid films increases radically as the XCNT loading increases. BCNT incorporated hybrid films show better electrical conductivity (3.0 × 10{sup −1} S/cm) than their FWCNT loaded counter parts (4.8 × 10{sup −4} S/cm) at a dosage of 2 wt.%. On the other hand, mechanical and other physical properties such as transparency, flexibility and surface smoothness of the developed hybrid films were affected as a function of XCNT concentration. We also demonstrated that the developed hybrid films lit up a LED lamp when inserted between batteries and the brightness of the emitted light depended on the XCNT loading. These results suggest a new way to transform an industrial biowaste into innovative advanced materials for applications in fields related to biomedicine, biosensors and electronics. - Highlights: • Hybrid nanobiocomposite films prepared using collagen, guar gum and CNTs. • Examined the effect of CNT doping on the properties of hybrid biocomposite films. • Higher CNT loading improved the conductivity radically, especially for BCNT. • The ability of developed hybrid films to lit up a LED lamp was demonstrated. • The results suggest a new way to transform biowaste into advanced materials.

  10. Electrical conductivity of aqueous solutions of aluminum salts

    Science.gov (United States)

    Vila, J.; Rilo, E.; Segade, L.; Cabeza, O.; Varela, L. M.

    2005-03-01

    We present experimental measurements of the specific electrical conductivity (σ) in aqueous solutions of aluminum salts at different temperatures, covering all salt concentrations from saturation to infinite dilution. The salts employed were AlCl3 , AlBr3 , AlI3 , and Al(NO3)3 , which present a 1:3 relationship between the electrical charges of anion and cation. In addition, we have measured the density in all ranges of concentrations of the four aqueous electrolyte solutions at 298.15K . The measured densities show an almost linear behavior with concentration, and we have fitted it to a second order polynomial with very high degree of approximation. The measurement of the specific conductivity at constant temperature reveals the existence of maxima in the conductivity vs concentration curves at molar concentrations around 1.5M for the three halide solutions studied, and at approximately 2M for the nitrate. We present a theoretical foundation for the existence of these maxima, based on the classical Debye-Hückel-Onsager hydrodynamic mean-field framework for electrical transport and its high concentration extensions, and also a brief consideration of ionic frictional coefficients using mode-coupling theory. We also found that the calculated values of the equivalent conductance vary in an approximately linear way with the square root of the concentration at concentrations as high as those where the maximum of σ appears. Finally, and for completeness, we have measured the temperature dependence of the electrical conductivity at selected concentrations from 283to353K , and performed a fit to an exponential equation of the Vogel-Fulcher-Tamman type. The values of the calculated temperatures of null mobility of the four salts are reported.

  11. Spatial-decomposition analysis of electrical conductivity in ionic liquid.

    Science.gov (United States)

    Tu, Kai-Min; Ishizuka, Ryosuke; Matubayasi, Nobuyuki

    2014-12-28

    The electrical conductivity of room temperature ionic liquid (IL) is investigated with molecular dynamics simulation. A trajectory of 1 μs in total is analyzed for the ionic liquid [C4mim][NTf2] (1-n-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, and the anion is also called TFSI or TFSA), and the ion motions are examined in direct connection to the conductivity within the framework formulated previously [K.-M. Tu, R. Ishizuka, and N. Matubayasi, J. Chem. Phys. 141, 044126 (2014)]. As a transport coefficient, the computed electrical conductivity is in fair agreement with the experiment. The conductivity is then decomposed into the autocorrelation term of Nernst-Einstein form and the cross-correlation term describing the two-body motions of ions, and the cross-correlation term is further decomposed spatially to incorporate the structural insights on ion configurations into the dynamic picture. It is observed that the ion-pair contribution to the conductivity is not spatially localized and extends beyond the first coordination shell. The extent of localization of the cross-correlation effect in the conductivity is in correspondence to that of the spatial correlation represented by radial distribution function, which persists over nanometer scale.

  12. Synthesis of Conductive Nanofillers/Nanofibers and Electrical Properties of their Conductive Polymer Composites

    Science.gov (United States)

    Sarvi, Ali

    Thanks to their corrosion resistance, light weight, low cost, and ease of processing, electrically conducting polymer composites (CPCs) have received significant attention for the replacement of metals and inorganic materials for sensors, actuators, supercapacitors, and electromagnetic interference (EMI) shields. In this PhD thesis, high aspect ratio conductive nanofillers namely copper nanowires (CuNWs) and multiwall carbon nanotubes (MWCNTs) were coated with polyaniline (PANi) using solution mixing and in-situ polymerization method, respectively. Transmission electron microscopy (TEM) showed a smooth polyaniline nano-coating between 5--18 nm in thickness on the nanofillers' surface. The coating thickness and; consequently, electrical conductivity was controlled and tuned by polyaniline/aniline concentration in solution. Composites with tunable conductivity may be used as chemisensors, electronic pressure sensors and switches. Coated nanofillers demonstrated better dispersion in polystyrene (PS) and provided lower electrical percolation threshold. Dispersion of nanofillers in PS was investigated using rheological measurements and confirmed with electron micrographs and nano-scale images of CPCs. Polyaniline (PANi), when used as a coating layer, was able to attenuate electromagnetic (EM) waves via absorption and store electrical charges though pseudocapacitance mechanism. The dielectric measurements of MWCNT-PANi/PS composites showed one order of magnitude increase in real electrical permittivity compared to that of MWCNT/PS composites making them suitable for charge storage purposes. Incorporation of PANi also brought a new insight into conductive network formation mechanism in electrospun mats where the orientation of conductive high aspect ratio nanofillers is a major problem. Conductive nanofibers of poly(vinylidene fluoride) (PVDF) filled with coated multiwall carbon nanotubes (MWCNTs) were fabricated using electrospinning. These highly oriented PVDF

  13. Electrically Conductive Thick Film Made from Silver Alkylcarbamates

    Science.gov (United States)

    Liu, Jianguo; Li, Xiangyou; Wang, Xiaoye; Zeng, Xiaoyan

    2010-10-01

    A homogeneous electrically conductive silver paste without solid or particle phase was developed using silver alkylcarbamates [(C n H2 n-1NHCOO)2Ag, n ≤ 4] as the precursor of the functional phase. The silver alkylcarbamates were light insensitive and had a low decomposition temperature (below 200°C). The paste was a non-Newtonian fluid with viscosity significantly depending on the content of the thickening agent ethyl cellulose. Array patterns with a resolution of 20 μm were obtained using this paste by a micropen direct-writing method. After the paste with about 48 wt.% silver methylcarbamate [(CH3NHCOO)2Ag] precursor was sintered at 180°C for 15 min, an electrically conductive network consisting of more than 95 wt.% silver was formed, and was found to have a volume electrical resistivity on the order of 10-5 Ω cm and a sheet electrical resistivity on the order of 10-2-10-3 Ω/□. The cohesion strength within the sintered paste and the adhesion strength between the sintered paste layer and the alumina ceramic substrate were tested according to test method B of the American Society for Testing and Materials standard D3359-08. None of the sintered paste layer was detached under the test conditions, and the cohesion and adhesion strengths met the highest grade according to the standard.

  14. The deep lunar electrical conductivity profile - Structural and thermal inferences

    Science.gov (United States)

    Hood, L. L.; Herbert, F.; Sonett, C. P.

    1982-01-01

    Simultaneous lunar surface and orbital magnetometer records are reexamined, to ascertain intervals which may be suitable for measuring lunar inductive response in the solar wind and terrestrial magnetosheath. Power spectral estimates of the response tangent to the lunar surface, defined in terms of transfer and gain functions, are obtained for the 0.0001-0.01 Hz frequency range. The maximum consistency of estimates from different time intervals is found when the initial analysis is limited to the tangential direction of maximum incident power, or that direction in which the ratio of signal to background noise is greatest. Spherically symmetric plasma confinement theory is used in the interpretation of transfer function data, by way of forward model calculations, under the assumption of continuous electrical conductivity increase with depth. Results are presented for internal electrical conductivity profile, metallic core radius, and selenotherm limits.

  15. Fabrication and Microstructure of BN Matrix Composites with Electrical Conductivity

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    BN ceramic is an advanced engineering ceramics with excellent thermal shock resistance, good workability and excellent dielectricity.TiB2 ceramic has excellent electric conductivity,high melting points, and corrosion resistance to molten metal.Therefore,the composite consisting of BN and TiB2 ceramics is expected to have a combination of above-mentioned properties,thereby can be used as self- heating crucible.In this paper,hot pressing technology was used to fabricate the high performance BN-TiB2 composite materials.microstructure and electric conducting mechanism were studied,and the relationship between the microstructure and physical property was discussed.The results show that the microstructure of composites has a great influence on the physical property of composites.The BN-TiB2 composites with excellent mechanical strength and stable resistivity can be obtained by optimizing the processing parameter and controlling the microstructure of composites.

  16. Graphene oxide with improved electrical conductivity for supercapacitor electrodes

    Science.gov (United States)

    Li, Z. J.; Yang, B. C.; Zhang, S. R.; Zhao, C. M.

    2012-02-01

    Predominant few-layer graphene (FLG) sheets of high electrical conductivity have been synthesized by a multi-step intercalation and reduction method. The electrical conductivity of the as-synthesized FLG is measured to be ∼3.2 × 104 S m-1, comparable to that of pristine graphite. Scanning electron microscopy (SEM), transmission electron microscopy (TEM) and Raman analysis reveal that the as-synthesized FLG sheets have large areas with single and double layers. The specific capacitance of 180 F g-1 is obtained for the FLG in a 1 M Na2SO4 aqueous electrolyte by integrating the cyclic voltammogram. The good capacitive behavior of the FLG is very promising for the application for next-generation high-performance electrochemical supercapacitors.

  17. Thermal conductivity, viscosity, and electrical conductivity of iron oxide with a cloud fractal structure

    Science.gov (United States)

    Jamilpanah, Pouya; Pahlavanzadeh, Hassan; Kheradmand, Amanj

    2016-09-01

    In the present study, nanoscale iron oxide was synthesized using a hydrothermal method; XRD analysis revealed that all the produced crystals are iron oxide. FESEM microscopic imaging showed that particles are on the scale of nano and their morphology is cloud fractal. To study the laboratory properties of thermal conductivity, viscosity, and electrical conductivity of the nanoparticles, they were dispersed in ethylene glycol-based fluid and the nanofluid was in a two-step synthesis during this process. The experiments were carried out with a weight fraction between 0 and 2 % at temperatures between 25 and 45 °C. According to the results of the experiments, increasing the density of nanoparticles in the fluid increases thermal conductivity, as it was predicted in all theoretical models. On the other hand, nano viscosity increases as the weight fraction increases while it decreases as temperature goes up. Electrical conductivity also increases with raising the temperature and weight fraction. Theoretical models were studied to predict Thermal conductivity, viscosity, and electrical conductivity of the nanofluid.

  18. Thermal conductivity, viscosity, and electrical conductivity of iron oxide with a cloud fractal structure

    Science.gov (United States)

    Jamilpanah, Pouya; Pahlavanzadeh, Hassan; Kheradmand, Amanj

    2017-04-01

    In the present study, nanoscale iron oxide was synthesized using a hydrothermal method; XRD analysis revealed that all the produced crystals are iron oxide. FESEM microscopic imaging showed that particles are on the scale of nano and their morphology is cloud fractal. To study the laboratory properties of thermal conductivity, viscosity, and electrical conductivity of the nanoparticles, they were dispersed in ethylene glycol-based fluid and the nanofluid was in a two-step synthesis during this process. The experiments were carried out with a weight fraction between 0 and 2 % at temperatures between 25 and 45 °C. According to the results of the experiments, increasing the density of nanoparticles in the fluid increases thermal conductivity, as it was predicted in all theoretical models. On the other hand, nano viscosity increases as the weight fraction increases while it decreases as temperature goes up. Electrical conductivity also increases with raising the temperature and weight fraction. Theoretical models were studied to predict Thermal conductivity, viscosity, and electrical conductivity of the nanofluid.

  19. Electrical conductivities and chemical stabilities of mixed conducting pyrochlores for SOFC applications

    DEFF Research Database (Denmark)

    Holtappels, P.; Poulsen, F.W.; Mogensen, Mogens Bjerg

    2000-01-01

    Pyrochlores with praseodymium as the A-site cation and zirconium, tin, cerium and manganese cations on the B-site were prepared in air and their electrical conductivities were investigated as a function of oxygen partial pressure and temperature. Pure Pr2Zr2O7+/-delta as well as samples modified...

  20. Magnetic resonance electrical impedance tomography for measuring electrical conductivity during electroporation.

    Science.gov (United States)

    Kranjc, M; Bajd, F; Serša, I; Miklavčič, D

    2014-06-01

    The electroporation effect on tissue can be assessed by measurement of electrical properties of the tissue undergoing electroporation. The most prominent techniques for measuring electrical properties of electroporated tissues have been voltage-current measurement of applied pulses and electrical impedance tomography (EIT). However, the electrical conductivity of tissue assessed by means of voltage-current measurement was lacking in information on tissue heterogeneity, while EIT requires numerous additional electrodes and produces results with low spatial resolution and high noise. Magnetic resonance EIT (MREIT) is similar to EIT, as it is also used for reconstruction of conductivity images, though voltage and current measurements are not limited to the boundaries in MREIT, hence it yields conductivity images with better spatial resolution. The aim of this study was to investigate and demonstrate the feasibility of the MREIT technique for assessment of conductivity images of tissues undergoing electroporation. Two objects were investigated: agar phantoms and ex vivo liver tissue. As expected, no significant change of electrical conductivity was detected in agar phantoms exposed to pulses of all used amplitudes, while a considerable increase of conductivity was measured in liver tissue exposed to pulses of different amplitudes.

  1. Comparison of Systems for Levitation Heating of Electrically Conductive Bodies

    Directory of Open Access Journals (Sweden)

    Bohus Ulrych

    2004-01-01

    Full Text Available Levitation heating of nonmagnetic electrically conductive bodies can be realized in various systems consisting of one of more inductors. The paper deals with compassion of the resultant. Lorentz lifts force acting on such a body (cylinder, sphere and velocity of its heating for different shapes of coils and parameters of the field currents (amplitudes, frequency. The tack is solved in quasi-coupled formulation. Theoretical considerations are supplemented with an illustrative example whose results are discussed.

  2. Electrical conductivity of polyaniline doped PVC–PMMA polymer blends

    Indian Academy of Sciences (India)

    S H Deshmukh; D K Burghate; V P Akhare; V S Deogaonkar; P T Deshmukh; M S Deshmukh

    2007-02-01

    The electrical conductivity of polyaniline doped polyvinylchloride (PVC) and poly(methyl methacrylate) (PMMA) thin films has been measured by studying the – characteristics at various temperatures in the range 323–363 K. The results are presented in the form of – characteristics and analysis has been made by interpretation of Poole–Frenkel, Fowler–Nordheim, Schottky ln() vs plots, Richardson and Arrhenius plots. The analysis of these results suggests that Schottky and Richardson mechanisms are primarily responsible for the observed conduction.

  3. Single-photon heat conduction in electrical circuits

    CERN Document Server

    Jones, P J; Tan, K Y; Möttönen, M

    2011-01-01

    We study photonic heat conduction between two resistors coupled weakly to a single superconducting microwave cavity. At low enough temperature, the dominating part of the heat exchanged between the resistors is transmitted by single-photon excitations of the fundamental mode of the cavity. This manifestation of single-photon heat conduction should be experimentally observable with the current state of the art. Our scheme can possibly be utilized in remote interference-free temperature control of electric components and environment engineering for superconducting qubits coupled to cavities.

  4. Electrical conductivity tensor of dense plasma in magnetic fields

    CERN Document Server

    Harutyunyan, Arus

    2016-01-01

    Electrical conductivity of finite-temperature plasma in neutron star crusts is studied for applications in magneto-hydrodynamical description of compact stars. We solve the Boltzmann kinetic equation in relaxation time approximation taking into account the anisotropy of transport due to the magnetic field, the effects of dynamical screening in the scattering matrix element and corre- lations among the nuclei. We show that conductivity has a minimum at a non-zero temperature, a low-temperature decrease and a power-law increase with increasing temperature. Selected numerical results are shown for matter composed of carbon, iron, and heavier nuclei present in the outer crusts of neutron star.

  5. ACCELERATED AGING AND ELECTRICAL CONDUCTIVITY TESTS IN CRAMBE SEEDS

    Directory of Open Access Journals (Sweden)

    Juliana Joice Pereira Lima

    2015-02-01

    Full Text Available The aim of this study was to adapt the methodology of the accelerated aging and electrical conductivity tests for determination of physiological potential in crambe seeds. Six seed lots of crambe (cv. FMS Brilhante were subjected to determination of moisture content, germination test, first count germination, emergence, and emergence speed index. For the accelerated aging test, the traditional methodology was used with water, and with a saturated potassium chloride and sodium chloride solution in three periods of exposure (24, 48, and 72 hours at 41°C; the electrical conductivity test was performed with four pre-soaking treatments (0, 2, 4, and 8 hours and four soaking periods (4, 8, 16, and 24 hours at 25°C. The accelerated aging test with water for 72 hours and the electrical conductivity test with 2 hours of pre-soaking and assessment after 16 hours were effective for classification of the crambe seed lots in regard to physiological quality.

  6. Electrical conduction in SnO{sub 2} varistors

    Energy Technology Data Exchange (ETDEWEB)

    Glot, A.B., E-mail: alexglot@mixteco.utm.m [Universidad Tehnologica de la Mixteca, Huajuapan de Leon, Oaxaca 69000 (Mexico); Gaponov, A.V. [Dniepropetrovsk National University, Dniepropetrovsk 49010 (Ukraine); Sandoval-Garcia, A.P. [Universidad Tehnologica de la Mixteca, Huajuapan de Leon, Oaxaca 69000 (Mexico)

    2010-01-15

    This paper outlines some details of the conduction mechanism in SnO{sub 2}-based ceramic varistors. It is shown that the activation energy of electrical conduction E{sub s}igma (the barrier height phi) in SnO{sub 2} varistor is weakly decreased at low electric field E and strongly decreased at high fields. The strong decrease in E{sub s}igma(E) at high fields is conditioning factor of highly nonlinear current-voltage characteristic. The conduction process is thermally activated not only at low (E{sub s}igmaapprox =0.8-1eV) but also at high electric fields (E{sub s}igmaapprox =0.3-0.5eV). The 'negative capacitance' phenomenon at high fields in highly nonlinear SnO{sub 2} varistor is observed. The relation between the high nonlinearity, the high slope of E{sub s}igma(E) dependence at high fields, the 'negative capacitance' and possible generation of the minority carriers (holes) at high fields is discussed.

  7. State of hydration and electrical conductance of ichthyotic skin

    Directory of Open Access Journals (Sweden)

    Gupta A

    1990-01-01

    Full Text Available Dry skin of twelve subjects suffering from ichthyosis vulgaris and the efficacy of a moisturiser-Cotaryl were quantitatively assessed by measuring the skin surface hydration and high frequency (3.5 MHz electrical conductance of skin. The state of hydration and conductance of ichthyotic skin were 86.9 + 24.6 and 11.0 + 5.7 micro-mho respectively, being much less-compared to 132. 0 + 5.3 and 72.5 + 54.0 micro-mho ofnormal subjects. The moisturiser increased the state of hydration and also the electrical conductance of the stratum corneuni to near-normal values and maintained them as long as the application continued. However, both the hydration and the conductance fell sharply within a week of withrawal of the moisturiser. A moisturiser was thus undoubtedly efficacious in ichthyotic skin, but the effect was only temporary. The state of hydration was found, at all stages, to bear a strong positive correlation (r = 0.69 to 0.80 with the skin conductance.

  8. The Thermal Electrical Conductivity Probe (TECP) for Phoenix

    Science.gov (United States)

    Zent, Aaron P.; Hecht, Michael H.; Cobos, Doug R.; Campbell, Gaylon S.; Campbell, Colin S.; Cardell, Greg; Foote, Marc C.; Wood, Stephen E.; Mehta, Manish

    2009-01-01

    The Thermal and Electrical Conductivity Probe (TECP) is a component of the Microscopy, Electrochemistry, and Conductivity Analyzer (MECA) payload on the Phoenix Lander. TECP will measure the temperature, thermal conductivity and volumetric heat capacity of the regolith. It will also detect and quantify the population of mobile H2O molecules in the regolith, if any, throughout the polar summer, by measuring the electrical conductivity of the regolith, as well as the dielectric permittivity. In the vapor phase, TECP is capable of measuring the atmospheric H2O vapor abundance, as well as augment the wind velocity measurements from the meteorology instrumentation. TECP is mounted near the end of the 2.3 m Robotic Arm, and can be placed either in the regolith material or held aloft in the atmosphere. This paper describes the development and calibration of the TECP. In addition, substantial characterization of the instrument has been conducted to identify behavioral characteristics that might affect landed surface operations. The greatest potential issue identified in characterization tests is the extraordinary sensitivity of the TECP to placement. Small gaps alter the contact between the TECP and regolith, complicating data interpretation. Testing with the Phoenix Robotic Arm identified mitigation techniques that will be implemented during flight. A flight model of the instrument was also field tested in the Antarctic Dry Valleys during the 2007-2008 International Polar year. 2

  9. Conductive network formation of carbon nanotubes in elastic polymer microfibers and its effect on the electrical conductance: Experiment and simulation.

    Science.gov (United States)

    Cho, Hyun Woo; Kim, Sang Won; Kim, Jeongmin; Kim, Un Jeong; Im, Kyuhyun; Park, Jong-Jin; Sung, Bong June

    2016-05-21

    We investigate how the electrical conductance of microfibers (made of polymers and conductive nanofillers) decreases upon uniaxial deformation by performing both experiments and simulations. Even though various elastic conductors have been developed due to promising applications for deformable electronic devices, the mechanism at a molecular level for electrical conductance change has remained elusive. Previous studies proposed that the decrease in electrical conductance would result from changes in either distances or contact numbers between conductive fillers. In this work, we prepare microfibers of single walled carbon nanotubes (SWCNTs)/polyvinyl alcohol composites and investigate the electrical conductance and the orientation of SWCNTs upon uniaxial deformation. We also perform extensive Monte Carlo simulations, which reproduce experimental results for the relative decrease in conductance and the SWCNTs orientation. We investigate the electrical networks of SWCNTs in microfibers and find that the decrease in the electrical conductance upon uniaxial deformation should be attributed to a subtle change in the topological structure of the electrical network.

  10. Electrically conductive biodegradable polymer composite for nerve regeneration: electricity-stimulated neurite outgrowth and axon regeneration.

    Science.gov (United States)

    Zhang, Ze; Rouabhia, Mahmoud; Wang, Zhaoxu; Roberge, Christophe; Shi, Guixin; Roche, Phillippe; Li, Jiangming; Dao, Lê H

    2007-01-01

    Normal and electrically stimulated PC12 cell cultures and the implantation of nerve guidance channels were performed to evaluate newly developed electrically conductive biodegradable polymer composites. Polypyrrole (PPy) doped by butane sulfonic acid showed a significantly higher number of viable cells compared with PPy doped by polystyrenesulfonate after a 6-day culture. The PC12 cells were left to proliferate for 6 days, and the PPy-coated membranes, showing less initial cell adherence, recorded the same proliferation rate as did the noncoated membranes. Direct current electricity at various intensities was applied to the PC12 cell-cultured conductive membranes. After 7 days, the greatest number of neurites appeared on the membranes with a current intensity approximating 1.7-8.4 microA/cm. Nerve guidance channels made of conductive biodegradable composite were implanted into rats to replace 8 mm of sciatic nerve. The implants were harvested after 2 months and analyzed with immunohistochemistry and transmission electron microscopy. The regenerated nerve tissue displayed myelinated axons and Schwann cells that were similar to those in the native nerve. Electrical stimulation applied through the electrically conductive biodegradable polymers therefore enhanced neurite outgrowth in a current-dependent fashion. The conductive polymers also supported sciatic nerve regeneration in rats.

  11. A Study on Properties of Electrical Conductive Bricks for Direct Current Electrical Arc Furnace

    Institute of Scientific and Technical Information of China (English)

    1999-01-01

    In this expeiment,the effects of temperature and graphite content on the electricl conductivity of MgO-C materials are studied,Experimental results indicated:the proper ontent of graphite is 10%-12%,The specific electrical resistance of MgO-C materials tends to decrease as the preheat treatment temerature rises.After heat treatment,the specific electrical resistance of MgO-C materials is nearly independent of temperature.

  12. Investigations on electrical conductivity and dielectric properties of Na doped ZnO synthesized from sol gel method

    Energy Technology Data Exchange (ETDEWEB)

    Tabib, Asma; Sdiri, Nasr [Laboratoire de Physico-Chimie des Matériaux Minéraux et leurs Applications, Centre National de Recherches en Sciences des Matériaux, B.P. 95 Hammam-Lif, 2050 (Tunisia); Elhouichet, Habib, E-mail: habib.elhouichet@fst.rnu.tn [Laboratoire de Physico-Chimie des Matériaux Minéraux et leurs Applications, Centre National de Recherches en Sciences des Matériaux, B.P. 95 Hammam-Lif, 2050 (Tunisia); Département de Physique, Faculté des Sciences de Tunis, University Tunis El Manar, Tunis 2092 (Tunisia); Férid, Mokhtar [Laboratoire de Physico-Chimie des Matériaux Minéraux et leurs Applications, Centre National de Recherches en Sciences des Matériaux, B.P. 95 Hammam-Lif, 2050 (Tunisia)

    2015-02-15

    Highlights: • ZnO nanoparticles doped with Na were prepared from sol-gel method. • Electric conductivity and dielectric properties were investigated. • The ZnO conductivity is estimated to be of p-type for critical Na doping of 1.5% at. - Abstract: Na doped ZnO nanoparticles (NPs) were elaborated by sol gel technique. The X-ray diffraction patterns show that the peaks are indexed to the hexagonal structure without any trace of an extra phase. Electric and dielectric properties were investigated using complex impedance spectroscopy. The impedance spectra were analyzed in terms of equivalent circuits involving resistors, capacitors and constant phase elements (CPE). The contribution of grain boundary resistance to the total resistance of the system is remarkable. The AC conductivity increases with temperature following the Arrhenius law, with single apparent activation energy for conduction process. The frequency dependence of the electric conductivity follows a simple power law behavior, in according to relation σ{sub AC}(ω) = σ(0) + A ω{sup s}, where s is smaller than 1. The analysis of dc conductivity indicates that the conduction is ionic in nature. The study of its variation, at fixed temperature, with Na content shows sharp decrease which is explained by the formation of Na{sub Zn} acceptor. It was found that the dc conductivity reaches its minimum value for critical Na concentration of 1.5% at which the conductivity is estimated to be of p-type. Impedance and modulus study reveals the temperature dependent non-Debye type relaxation phenomenon. Dielectric studies revealed a promising dielectric properties (relatively high ε′ at low frequencies and low loss at high frequencies). In the low-frequency region, the values of M′ tends to zero suggesting negligible or absent electrode polarization phenomenon. The frequency dependent maxima in the imaginary modulus are found to obey to Arrhenius law.

  13. Electrically conductive gold- and copper-metallized DNA origami nanostructures.

    Science.gov (United States)

    Geng, Yanli; Pearson, Anthony C; Gates, Elisabeth P; Uprety, Bibek; Davis, Robert C; Harb, John N; Woolley, Adam T

    2013-03-12

    This work demonstrates the use of a circuit-like DNA origami structure as a template to fabricate conductive gold and copper nanostructures on Si surfaces. We improved over previous results by using multiple Pd seeding steps to increase seed uniformity and density. Our process has also been characterized through atomic force microscopy, particle size distribution analysis, and scanning electron microscopy. We found that four successive Pd seeding steps yielded the best results for electroless metal plating on DNA origami. Electrical resistance measurements were done on both Au- and Cu-metallized nanostructures, with each showing ohmic behavior. Gold-plated DNA origami structures made under optimal conditions had an average resistivity of 7.0 × 10(-5) Ω·m, whereas copper-metallized structures had a resistivity as low as 3.6 × 10(-4) Ω·m. Importantly, this is the first demonstration of electrically conductive Cu nanostructures fabricated on either DNA or DNA origami templates. Although resistivities for both gold and copper samples were larger than those of the bulk metal, these metal nanostructures have the potential for use in electrically connecting small structures. In addition, these metallized objects might find use in surface-enhanced Raman scattering experiments.

  14. Realistic Electric Field Mapping of Anisotropic Muscle During Electrical Stimulation Using a Combination of Water Diffusion Tensor and Electrical Conductivity.

    Science.gov (United States)

    Choi, Bup Kyung; Oh, Tong In; Sajib, Saurav Zk; Kim, Jin Woong; Kim, Hyung Joong; Kwon, Oh In; Woo, Eung Je

    2017-04-01

    To realistically map the electric fields of biological tissues using a diffusion tensor magnetic resonance electrical impedance tomography (DT-MREIT) method to estimate tissue response during electrical stimulation. Imaging experiments were performed using chunks of bovine muscle. Two silver wire electrodes were positioned inside the muscle tissue for electrical stimulation. Electric pulses were applied with a 100-V amplitude and 100-μs width using a voltage stimulator. During electrical stimulation, we collected DT-MREIT data from a 3T magnetic resonance imaging scanner. We adopted the projected current density method to calculate the electric field. Based on the relation between the water diffusion tensor and the conductivity tensor, we computed the position-dependent scale factor using the measured magnetic flux density data. Then, a final conductivity tensor map was reconstructed using the multiplication of the water diffusion tensor and the scale factor. The current density images from DT-MREIT data represent the internal current flows that exist not only in the electrodes but also in surrounding regions. The reconstructed electric filed map from our anisotropic conductivity tensor with the projected current density shows coverage that is more than 2 times as wide, and higher signals in both the electrodes and surrounding tissues, than the previous isotropic method owing to the consideration of tissue anisotropy. An electric field map obtained by an anisotropic reconstruction method showed different patterns from the results of the previous isotropic reconstruction method. Since accurate electric field mapping is important to correctly estimate the coverage of the electrical treatment, future studies should include more rigorous validations of the new method through in vivo and in situ experiments.

  15. Realistic Electric Field Mapping of Anisotropic Muscle During Electrical Stimulation Using a Combination of Water Diffusion Tensor and Electrical Conductivity

    Science.gov (United States)

    2017-01-01

    Purpose To realistically map the electric fields of biological tissues using a diffusion tensor magnetic resonance electrical impedance tomography (DT-MREIT) method to estimate tissue response during electrical stimulation. Methods Imaging experiments were performed using chunks of bovine muscle. Two silver wire electrodes were positioned inside the muscle tissue for electrical stimulation. Electric pulses were applied with a 100-V amplitude and 100-μs width using a voltage stimulator. During electrical stimulation, we collected DT-MREIT data from a 3T magnetic resonance imaging scanner. We adopted the projected current density method to calculate the electric field. Based on the relation between the water diffusion tensor and the conductivity tensor, we computed the position-dependent scale factor using the measured magnetic flux density data. Then, a final conductivity tensor map was reconstructed using the multiplication of the water diffusion tensor and the scale factor. Results The current density images from DT-MREIT data represent the internal current flows that exist not only in the electrodes but also in surrounding regions. The reconstructed electric filed map from our anisotropic conductivity tensor with the projected current density shows coverage that is more than 2 times as wide, and higher signals in both the electrodes and surrounding tissues, than the previous isotropic method owing to the consideration of tissue anisotropy. Conclusions An electric field map obtained by an anisotropic reconstruction method showed different patterns from the results of the previous isotropic reconstruction method. Since accurate electric field mapping is important to correctly estimate the coverage of the electrical treatment, future studies should include more rigorous validations of the new method through in vivo and in situ experiments. PMID:28446015

  16. In vivo electrical conductivity measurements during and after tumor electroporation: conductivity changes reflect the treatment outcome.

    Science.gov (United States)

    Ivorra, Antoni; Al-Sakere, Bassim; Rubinsky, Boris; Mir, Lluis M

    2009-10-01

    Electroporation is the phenomenon in which cell membrane permeability is increased by exposing the cell to short high-electric-field pulses. Reversible electroporation treatments are used in vivo for gene therapy and drug therapy while irreversible electroporation is used for tissue ablation. Tissue conductivity changes induced by electroporation could provide real-time feedback of the treatment outcome. Here we describe the results from a study in which fibrosarcomas (n = 39) inoculated in mice were treated according to different electroporation protocols, some of them known to cause irreversible damage. Conductivity was measured before, within the pulses, in between the pulses and for up to 30 min after treatment. Conductivity increased pulse after pulse. Depending on the applied electroporation protocol, the conductivity increase after treatment ranged from 10% to 180%. The most significant conclusion from this study is the fact that post-treatment conductivity seems to be correlated with treatment outcome in terms of reversibility.

  17. Electrical Conductivity of Metals: A New Look at this Subject

    Directory of Open Access Journals (Sweden)

    Silva P. R.

    2014-04-01

    Full Text Available Various parameters tied to the electrical conductivity of typical metals are estimated and are expressed in terms of universal constants. It happen s that they are close to those found in metallic copper at room temperature. The fact that the realization of the model occurs at room temperature is explained by using th e Landauer’s erasure principle. The averaged collision time of the electron of conduction is also thought as a particle lifetime. Finally an analogy is established between the motion of the electron of conduction and the cosmological constant problem, where a spherical surface of radius equal to the electron mean free path has been thought as a surf ace horizon for the charge carriers.

  18. Measurements of middle-atmosphere electric fields and associated electrical conductivities

    Science.gov (United States)

    Hale, L. C.; Croskey, C. L.; Mitchell, J. D.

    1981-01-01

    A simple antenna for measuring the vertical electric field in the 'middle atmosphere' has been flown on a number of rocket-launched parachute-borne payloads. The data from the first nine such flights, launched under a variety of geophysical conditions, are presented, along with electrical conductivities measured simultaneously. The data include indications of layered peaks of several volts per meter in the mesospheric field at high and low latitudes in situations of relatively low conductivity. During an auroral 'REP' event the electric field reversed direction in the lower stratosphere, accompanied by a substantial enhancement in conductivity. The data generally do not confirm speculations based only on the extension of the thunderstorm circuit from below or the mapping of ionospheric and magnetospheric fields from above, but seem to require, in addition, internal generation processes in the middle atmosphere.

  19. Improved Electrical Conductivity of Carbon/Polyvinyl Alcohol Electrospun Nanofibers

    Directory of Open Access Journals (Sweden)

    Nader Shehata

    2015-01-01

    Full Text Available Carbon nanofibers (CNFs gained much interest in the last few years due to their promising electrical, chemical, and mechanical characteristics. This paper investigates a new nanocomposite composed of carbon nanofibers hosted by PVA and both are integrated in one electrospun nanofibers web. This technique shows a simple and cheap way to offer a host for CNFs using traditional deposition techniques. The results show that electrical conductivity of the formed nanofibers has been improved up to 1.63 × 10−4 S/cm for CNFs of weight 2%. The peak temperature of mass loss through TGA measurements has been reduced by 2.3%. SEM images show the homogeneity of the formed PVA and carbon nanofibers in one web, with stretched CNFs after the electrospinning process. The formed nanocomposite can be used in wide variety of applications including nanoelectronics and gas adsorption.

  20. MHD rotation of electrically conducting media in crossed fields

    Energy Technology Data Exchange (ETDEWEB)

    Nikitin, N.V.

    1978-01-01

    A nonlinear scheme is developed for calculating the hydrodynamic characteristics of MHD flow in a cylindrical vessel of finite dimensions, in an electric field and a magnetic field crossing each other. The incompressible fluid is assumed to have a constant viscosity and electrical conductivity. The solution to the complete system of MHD equations is expanded in a series with respect to the magnetic Reynolds number, for a large hydrodynamic Reynolds number. And rather simple engineering formulas for calculating the velocity field and the pressure field are derived by the Karman-Pohlhausen method of integral relations. The results are compared with experimental data pertaining to a model helium-xenon discharge chamber with distribution of the Lorentz force causing the plasma to rotate as a quasi-solid. 15 references, 5 figures, 1 table.

  1. Electrical Conductivity Mechanism in Unconventional Lead Vanadate Glasses

    Science.gov (United States)

    Abdel-Wahab, F.; Merazga, A.; Montaser, A. A.

    2016-12-01

    Lead vanadate glasses of the system (V2O5)_{1-x}(PbO)x with x = 0.4 , 0.45, 0.5, 0.55, 0.6 have been prepared by the press-quenching technique. The dc (σ (0) ) and ac (σ (ω )) electrical conductivities were measured in the temperature range from 150 to 420 K and the frequency range from 102 to 106 Hz. The electrical properties are shown to be sensitive to composition. The experimental results have been analyzed within the framework of different models. The dc conductivity is found to be proportional to Tp with the exponent p ranging from 8.2 to 9.8, suggesting that the transport is determined by a multi-phonon process of weak electron-lattice coupling. The ac conductivity is explained by the percolation path approximation (PPA). In this model, σ (ω ) is closely related to the σ (0) and fitting the experimental data produces a dielectric relaxation time τ in good agreement with the expected value in both magnitude and temperature dependence.

  2. Multifunctional conducting fibres with electrically controlled release of ciprofloxacin.

    Science.gov (United States)

    Esrafilzadeh, Dorna; Razal, Joselito M; Moulton, Simon E; Stewart, Elise M; Wallace, Gordon G

    2013-08-10

    We hereby present a new method of producing coaxial conducting polymer fibres loaded with an antibiotic drug that can then be subsequently released (or sustained) in response to electrical stimulation. The method involves wet-spinning of poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate) (PEDOT:PSS) fibre, which served as the inner core to the electropolymerised outer shell layer of polypyrrole (Ppy). Ciprofloxacin hydrochloride (Cipro) was selected as the model drug and as the dopant in the Ppy synthesis. The release of Cipro in phosphate buffered saline (PBS) from the fibres was controlled by switching the redox state of Ppy.Cipro layer. Released Cipro under passive and stimulated conditions were tested against Gram positive (Streptococcus pyogenes) and Gram negative (Escherichia coli) bacteria. Significant inhibition of bacterial growth was observed against both strains tested. These results confirm that Cipro retains antibacterial properties during fibre fabrication and electrochemically controlled release. In vitro cytotoxicity testing utilising the neural B35 cell line confirmed the cytocompatibility of the drug loaded conducting fibres. Electrical conductivity, cytocompatibility and tuning release profile from this flexible fibre can lead to promising bionic applications such as neuroprosthetics and localised drug delivery. Copyright © 2013 Elsevier B.V. All rights reserved.

  3. Electrical conductivity of warm neutron star crust in magnetic fields

    CERN Document Server

    Harutyunyan, Arus

    2016-01-01

    We study the electrical conductivity of finite-temperature crust of a warm compact star which may be formed in the aftermath of a supernova explosion or a binary neutron star merger as well as when a cold neutron star is heated by accretion of material from a companion. We focus on the temperature-density regime where plasma is in the liquid state and, therefore, the conductivity is dominated by the electron scattering off correlated nuclei. The dynamical screening of this interaction is implemented in terms of polarization tensor computed in the hard-thermal-loop effective field theory of QED plasma. The correlations of the background ionic component are accounted for via a structure factor derived from Monte-Carlo simulations of one-component-plasma. With this input we solve the Boltzmann kinetic equation in relaxation time approximation taking into account the anisotropy of transport due to the magnetic field. The electrical conductivity tensor is studied numerically as a function of temperature and densit...

  4. Electrical Conductivity Mechanism in Unconventional Lead Vanadate Glasses

    Science.gov (United States)

    Abdel-Wahab, F.; Merazga, A.; Montaser, A. A.

    2017-03-01

    Lead vanadate glasses of the system (V2O5)_{1-x}(PbO)x with x = 0.4, 0.45, 0.5, 0.55, 0.6 have been prepared by the press-quenching technique. The dc (σ (0)) and ac (σ (ω )) electrical conductivities were measured in the temperature range from 150 to 420 K and the frequency range from 102 to 106 Hz. The electrical properties are shown to be sensitive to composition. The experimental results have been analyzed within the framework of different models. The dc conductivity is found to be proportional to Tp with the exponent p ranging from 8.2 to 9.8, suggesting that the transport is determined by a multi-phonon process of weak electron-lattice coupling. The ac conductivity is explained by the percolation path approximation (PPA). In this model, σ (ω ) is closely related to the σ (0) and fitting the experimental data produces a dielectric relaxation time τ in good agreement with the expected value in both magnitude and temperature dependence.

  5. Lunar electrical conductivity, permeability and temperature from Apollo magnetometer experiments

    Science.gov (United States)

    Dyal, P.; Parkin, C. W.; Daily, W. D.

    1977-01-01

    Magnetometers were deployed at four Apollo sites on the moon to measure remanent and induced lunar magnetic fields. Measurements from this network of instruments were used to calculate the electrical conductivity, temperature, magnetic permeability, and iron abundance of the lunar interior. The measured lunar remanent fields range from 3 gammas minimum at the Apollo 15 site to 327 gammas maximum at the Apollo 16 site. Simultaneous magnetic field and solar plasma pressure measurements show that the remanent fields at the Apollo 12 and 16 sites interact with, and are compressed by, the solar wind. Remanent fields at Apollo 12 and Apollo 16 are increased 16 gammas and 32 gammas, respectively, by a solar plasma bulk pressure increase of 1.5 X 10 to the -7th power dynes/sq cm. Global lunar fields due to eddy currents, induced in the lunar interior by magnetic transients, were analyzed to calculate an electrical conductivity profile for the moon. From nightside magnetometer data in the solar wind it was found that deeper than 170 km into the moon the conductivity rises from .0003 mhos/m to .10 mhos/m at 100 km depth. Recent analysis of data obtained in the geomagnetic tail, in regions free of complicating plasma effects, yields results consistent with nightside values.

  6. Gas-Tolerant Device Senses Electrical Conductivity of Liquid

    Science.gov (United States)

    O'Connor, Edward W.

    2005-01-01

    The figure depicts a device for measuring the electrical conductivity of a flowing liquid. Unlike prior such devices, this one does not trap gas bubbles entrained in the liquid. Usually, the electrical conductivity of a liquid is measured by use of two electrodes immersed in the liquid. A typical prior device based on this concept contains large cavities that can trap gas. Any gas present between or near the electrodes causes a significant offset in the conductivity reading and, if the gas becomes trapped, then the offset persists. Extensive tests on two-phase (liquid/ gas) flow have shown that in the case of liquid flowing along a section of tubing, gas entrained in the liquid is not trapped in the section as long as the inner wall of the section is smooth and continuous, and the section is the narrowest tubing section along the flow path. The design of the device is based on the foregoing observation: The electrodes and the insulators separating the electrodes constitute adjacent parts of the walls of a tube. The bore of the tube is machined to make the wall smooth and to provide a straight flow path from the inlet to the outlet. The diameter of the electrode/insulator tube assembly is less than the diameter of the inlet or outlet tubing. An outer shell contains the electrodes and insulators and constitutes a leak and pressure barrier. Any gas bubble flowing through this device causes only a momentary conductivity offset that is filtered out by software used to process the conductivity readings.

  7. The electrical conductivity and longitudinal magnetoresistance of metallic nanotubes

    Science.gov (United States)

    Moraga, Luis; Henriquez, Ricardo; Bravo, Sergio; Solis, Basilio

    2017-03-01

    Proceeding from exact solutions of the Boltzmann transport equation in the relaxation time approximation, we present formulas for the electrical conductivity and longitudinal magnetoresistance of single-crystalline cylindrical nanotubes. The effects of surface scattering are taken into account by introducing different specularity parameters at the inner and outer surfaces. For small values of the inner diameter, these formulas reduce to the respective expressions for cylindrical nanowires. It is found that the existing measurements of the resistivity of nanotubes (Venkata Kamalakar and Raychaudhuri, New J. Phys. 14, 043032 (2012)) can be accurately described by this formalism.

  8. HYDROMAGNETIC DIVERGENT CHANNEL FLOW OF A VISCOELASTIC ELECTRICALLY CONDUCTING FLUID

    Directory of Open Access Journals (Sweden)

    RITA CHOUDHURY

    2011-10-01

    Full Text Available A theoretical study for the two-dimensional boundary layer flow through a divergent channel of a visco-elastic electrically conducting fluid in presence of transverse magnetic field has been considered. Similarity solutions are obtained by considering a special form of magnetic field. The analytical expressions for velocity and skin friction at the wall have been obtained and numerically worked out for different values of the flow parametersinvolved in the solution. The velocity and the skin friction coefficient have been presented graphically to observe the visco-elastic effects for various values of the flow parameters across the boundary layer.

  9. The electrical conductivity and longitudinal magnetoresistance of metallic nanotubes

    Energy Technology Data Exchange (ETDEWEB)

    Moraga, Luis, E-mail: luismoragajaramillo@gmail.com [Universidad Central de Chile, Toesca 1783, Santiago 8370178 (Chile); Henriquez, Ricardo, E-mail: rahc.78@gmail.com [Departamento de Física, Universidad Técnica Federico Santa María, Av. España 1680, Valparaíso (Chile); Bravo, Sergio, E-mail: bravo.castillo.sergio@gmail.com [Departamento de Física, Universidad Técnica Federico Santa María, Av. España 1680, Valparaíso (Chile); Solis, Basilio, E-mail: bsolis1984@gmail.com [Argelander-Institut für Astronomie, Auf dem Hügel 71, 53121 Bonn (Germany)

    2017-03-01

    Proceeding from exact solutions of the Boltzmann transport equation in the relaxation time approximation, we present formulas for the electrical conductivity and longitudinal magnetoresistance of single-crystalline cylindrical nanotubes. The effects of surface scattering are taken into account by introducing different specularity parameters at the inner and outer surfaces. For small values of the inner diameter, these formulas reduce to the respective expressions for cylindrical nanowires. It is found that the existing measurements of the resistivity of nanotubes (Venkata Kamalakar and Raychaudhuri, New J. Phys. 14, 043032 (2012)) can be accurately described by this formalism.

  10. Electrical conduction in some inclusion compounds of iodine

    Energy Technology Data Exchange (ETDEWEB)

    Oza, A.T. (Sardar Patel Univ., Vallabh Vidyanagar (India). Dept. of Physics)

    1983-12-16

    The electrical resistivities of three organic polyiodide chain complexes, namely ..cap alpha..-cyclodextrin-KI-I/sub 2/ x 4 H/sub 2/O, amylose-iodine, and (coumarin)/sub 4/-KI-I/sub 2/ are found to increase at high pressures up to 80 kbar. The increase in the resistivities at high pressures and the Arrhenius-type temperature dependence of resistivities can be explained only with trap limited conduction. The effect of trapping is enhanced at high pressures. Pressure increases either the density of traps or their depth or both.

  11. Weak discontinuities in electrically conducting and radiating gases

    Directory of Open Access Journals (Sweden)

    Rai A.

    2002-01-01

    Full Text Available The singular surface theory has been used to determine the law of propagation of weak discontinuities and the problem of growth and decay of waves. The effect of radioactive heat transfer has been treated using a differential approximation which is valid over entire optical depth range. The effects of wave geometry and magnetic field with finite electrical conductivity on the global behavior of the wave amplitude have also been studied. The two cases of diverging and converging waves have been discussed separately.

  12. Scattering processes and electrical conductivity of partially ionized hydrogen plasma

    Energy Technology Data Exchange (ETDEWEB)

    Ramazanov, T. [Fachbereich Physik, Universitaet Rostock, D-18051 Rostock (Germany); SRIETP, Al Farabi Kazakh National University, Tole bi, 96a, 480012, Almaty (Kazakhstan); Galiyev, K.; Dzhumagulova, K.N. [SRIETP, Al Farabi Kazakh National University, Tole bi, 96a, 480012, Almaty (Kazakhstan); Roepke, G.; Redmer, R. [Fachbereich Physik, Universitaet Rostock, D-18051 Rostock (Germany)

    2003-07-01

    We consider partially ionized hydrogen plasma for the density region n{sub e} = (10{sup 18} / 10{sup 22}) cm{sup -} {sup 3}. The cross sections for scattering processes between the particles are calculated within the partial wave method. Charged particles in the system (electrons, protons) interact via an effective potential that takes into account three-particle correlations. The Buckingham polarization potential is used to describe electron-atom and proton-atom interactions. The electrical conductivity is determined using the Chapman-Enskog method. The results are compared with other available data. (Abstract Copyright [2003], Wiley Periodicals, Inc.)

  13. Comment on "Electrical Conductivity and Current-Voltage Characteristics of Individual Conducting Polymer PEDOT Nanowires"

    Institute of Scientific and Technical Information of China (English)

    P. Ohlckers; P. Pipinys

    2009-01-01

    @@ In "Electrical Conductivity and Current-Voltage Characteristics of Individual Conducting Polymer PEDOT Nanowires", Long et al.[1] reported the currentvoltage ( Ⅰ - Ⅴ) characteristics of individual poly(3,4-ethylenedioxythiophene) (PEDOT) nanowires in the temperature range from 20 to 50K (Fig. 2(a)). The authors stated that at temperatures equal to 50 K and higher, the Ⅰ - Ⅴ curves were linear. With decreasing temperature the Ⅰ - Ⅴ curves gradually became nonlinear. The temperature behavior of Ⅰ - Ⅴ characteristics is not suitably explained.

  14. Dynamic Conduction in 2-Dimensional Conductor: Magneto-Conductivity Tensor under Rapid Oscillatory Electric Field

    Directory of Open Access Journals (Sweden)

    Pijus Kanti Samanta

    2016-06-01

    Full Text Available The conduction mechanism of metals under rapidly oscillating electric field and static perpendicular magnetic field has been investigated within the regime ω≫1/τ. The conventional Lorentz force equation has been used to calculate the conduction current density within the metal. It was found that the conductivity of the metal is anisotropic in nature. We also found that the diagonal elements of the conductivity tensor are equal while the off-diagonal elements are equal in magnitude but opposite in sign. Further it is also found that the diagonal components are imaginary and inversely varies with ω while the off-diagonal components are inversely proportional to ω2.

  15. Fluctuations electrical conductivity in a granular s-wave superconductor

    Science.gov (United States)

    Salehi, H.; Yousefvand, A.; Zargar Shoushtari, M.

    2017-01-01

    The present study tries to evaluate the fluctuation electrical conductivity in a granular s-wave superconductor at the temperature near to the critical temperature. The evaluation is conducted under the condition of limited tunneling conductance between the grains and small impurity concentration. All the first order fluctuation corrections, involving the nonlocal scattered electron in a granular s-wave superconductor, are calculated in three dimensions and in the limit of clean. Using Green's function theory initially, the Cooperon (impurity vertex), λ (q , ε1 , ε2) , and the fluctuation propagator, Lk (q , Ωk) , are calculated in the presence of impurities. Then, the three distinct contributions of Aslamazov-Larkin, Maki-Thompson, and Density of states are calculated by means of the Kubo formula. Analysis shows that the terms of Aslamazov-Larkin and anomalous Maki-Thompson have positive contributions to the conductivity in the clean limit, whereas the terms of Density of state and the regular Maki-Thompson have negative signs, leading to the reduction of total fluctuation conductivity.

  16. Thermal and electrical conductivity of iron at Earth's core conditions

    CERN Document Server

    Pozzo, Monica; Gubbins, David; Alfè, Dario

    2012-01-01

    The Earth acts as a gigantic heat engine driven by decay of radiogenic isotopes and slow cooling, which gives rise to plate tectonics, volcanoes, and mountain building. Another key product is the geomagnetic field, generated in the liquid iron core by a dynamo running on heat released by cooling and freezing to grow the solid inner core, and on chemical convection due to light elements expelled from the liquid on freezing. The power supplied to the geodynamo, measured by the heat-flux across the core-mantle boundary (CMB), places constraints on Earth's evolution. Estimates of CMB heat-flux depend on properties of iron mixtures under the extreme pressure and temperature conditions in the core, most critically on the thermal and electrical conductivities. These quantities remain poorly known because of inherent difficulties in experimentation and theory. Here we use density functional theory to compute these conductivities in liquid iron mixtures at core conditions from first principles- the first directly comp...

  17. Electrical conductivity measurements on disk-shaped samples.

    Science.gov (United States)

    de Boor, J; Zabrocki, K; Frohring, J; Müller, E

    2014-07-01

    We have developed a sample holder design that allows for electrical conductivity measurements on a disk-shaped sample. The sample holder design is based on and compatible with popular measurement systems that are currently restricted to bar-shaped samples. The geometrical correction factors which account for the adjusted measurement configuration were calculated using finite element modeling for a broad range of sample and measurement geometries. We also show that the modeling results can be approximated by a simple analytical fit function with excellent accuracy. The proposed sample holder design is compatible with a concurrent measurement of the Seebeck coefficient. The chosen sample geometry is furthermore compatible with a thermal conductivity measurement using a laser flash apparatus. A complete thermoelectric characterization without cutting the sample is thus possible.

  18. Electrical Conductivity of Alkaline-reduced Graphene Oxide

    Institute of Scientific and Technical Information of China (English)

    WANG Huan; TIAN Hong-wei; WANG Xin-wei; QIAO Liang; WANG Shu-min; WANG Xing-li; ZHENG Wei-tao; LIU Yi-chun

    2011-01-01

    A green route using a very simple and straightforward ultrasonic process under alkaline conditions,rather than a general chemical reduction process using hydrazine,was utilized to obtain the hydrophilic reduced graphene oxide(RGO) sheets,via removing oxygen functional groups from graphene oxide(GO) and repairing the aromatic structure.It is found that the conductivity of the obtained RGO could be tuned by changing pH value in alkaline solution,and the current-voltage(Ⅰ-Ⅴ) curves of both GO and RGO are nonlinear and slightly asymmetric.Under the same applied voltage,the current of RGO is much larger than that of GO,indicating a pronounced increase in the electrical conductivity of RGO,compared to that of GO.

  19. Interplanetary double-shock ensembles with anomalous electrical conductivity

    Science.gov (United States)

    Dryer, M.

    1972-01-01

    Similarity theory is applied to the case of constant velocity, piston-driven, shock waves. This family of solutions, incorporating the interplanetary magnetic field for the case of infinite electric conductivity, represents one class of experimentally observed, flare-generated shock waves. This paper discusses the theoretical extension to flows with finite conductivity (presumably caused by unspecified modes of wave-particle interactions). Solutions, including reverse shocks, are found for a wide range of magnetic Reynolds numbers from one to infinity. Consideration of a zero and nonzero ambient flowing solar wind (together with removal of magnetic considerations) enables the recovery of earlier similarity solutions as well as numerical simulations. A limited comparison with observations suggests that flare energetics can be reasonably estimated once the shock velocity, ambient solar wind velocity and density, and ambient azimuthal Alfven Mach number are known.

  20. Electrical conductivity of a methane-air burning plasma under the action of weak electric fields

    Science.gov (United States)

    Colonna, G.; Pietanza, L. D.; D'Angola, A.; Laricchiuta, A.; Di Vita, A.

    2017-02-01

    This paper focuses on the calculation of the electrical conductivity of a methane-air flame in the presence of weak electric fields, solving the Boltzmann equation for free electrons self-consistently coupled with chemical kinetics. The chemical model GRI-Mech 3.0 has been completed with chemi-ionization reactions to model ionization in the absence of fields, and a database of cross sections for electron-impact-induced processes to account for reactions and transitions activated in the flame during discharge. The dependence of plasma properties on the frequency of an oscillating field has been studied under different pressure and gas temperature conditions. Fitting expressions of the electrical conductivity as a function of gas temperature and methane consumption are provided for different operational conditions in the Ansaldo Energia burner.

  1. Custom modular electromagnetic induction system for shallow electrical conductivity measurements

    Science.gov (United States)

    Mester, Achim; Zimmermann, Egon; Tan, Xihe; von Hebel, Christian; van der Kruk, Jan; van Waasen, Stefan

    2017-04-01

    Electromagnetic induction (EMI) is a contactless measurement method that offers fast and easy investigations of the shallow electrical conductivity, e.g. on the field-scale. Available frequency domain EMI systems offer multiple fixed transmitter-receiver (Tx-Rx) pairs with Tx-Rx separations between 0.3 and 4.0 m and investigation depths of up to six meters. Here, we present our custom EMI system that consists of modular sensor units that can either be transmitters or receivers, and a backpack containing the data acquisition system. The prototype system is optimized for frequencies between 5 and 30 kHz and Tx-Rx separations between 0.4 and 2.0 m. Each Tx and Rx signal is digitized separately and stored on a notebook computer. The soil conductivity information is determined after the measurements with advanced digital processing of the data using optimized correction and calibration procedures. The system stores the raw data throughout the entire procedure, which offers many advantages: (1) comprehensive accuracy and error analysis as well as the reproducibility of corrections and calibration procedures; (2) easy customizability of the number of Tx-/Rx-units and their arrangement and frequencies; (3) signals from simultaneously working transmitters can be separated within the received data using orthogonal signals, resulting in additional Tx-Rx pairs and maximized soil information; and (4) later improvements in the post-processing algorithms can be applied to old data sets. Exemplary, here we present an innovative setup with two transmitters and five receivers using orthogonal signals yielding ten Tx-Rx pairs. Note that orthogonal signals enable for redundant Tx-Rx pairs that are useful for verification of the transmitter signals and for data stacking. In contrast to commercial systems, only adjustments in the post-processing were necessary to realize such measurement configurations with flexibly combined Tx and Rx modules. The presented system reaches an accuracy of

  2. Electric conductivity of polymer films filled with magnetic nanoparticles

    Science.gov (United States)

    Rumyantsev, B. M.; Bibikov, S. B.; Bychkova, A. V.; Leontiev, V. G.; Berendyaev, V. I.; Sorokina, O. N.; Kovarskii, A. L.

    2016-12-01

    The conductivity of polymer composites with magnetic nanoparticles (MNP) containing magnetite and other MNP (Ni, Cu-Ni) in the layers and planar cells with Al electrodes is studied. For soluble polymers (polyvinylpyrrolidone and polyvinyl alcohol) containing 1-10 wt % of magnetite MNP, a substantial effect of MNP on surface conductivity is detected over a wide range (from 10-10 to 10-3 Ω-1). It is shown that the addition of magnetite MNP not only results in a considerable change in cell conductivity, but also leads to its partially irreversible variation (by an order of magnitude or more) via minor modifications of the experimental conditions (temperature, electric field). For high-resistance samples with low probabilities of conducting chain formation, temperature current peaks are observed upon moderate heating (up to 350 K). These peaks are similar to the maxima observed upon polymer electret thermodischarges when the charges are captured by the deep centers associated with separate MNP or MNP aggregates. The type and position of the maxima are determined by the characteristics of the polymer matrix. For polyvinylpyrrolidone composites, the maxima are observed some time after heating (the echo effect). With composites based on solventborne polymers (polyalkanesterimides, soluble polyimide) and Ni, Cu-Ni MNP, no change in film conductivity measured electrophotographically is observed, due to the formation of a dielectric coating formed by polymer macromolecules adsorbed on the MNP surface. An explanation based on the possible formation of magnetic aggregates of magnetite MNP and conducting chains is proposed. Magnetic aggregation IPM is proposed as one way of controlling cell conductivity.

  3. Printability and Electrical Conductivity of UV Curable MWCNT Ink

    Science.gov (United States)

    Ortega, Ada; Park, Byungwoo; Kim, Nam Soo

    2015-03-01

    Composites reinforced with multiwalled carbon nanotubes (MWCNT) in a photosensitive acrylic matrix were successfully synthesized and their printing, rheological, and electrical behavior was characterized. The shape of the reinforcement MWCNT particles was analyzed by transmission electron microscopy. The MWCNT were mixed in the acrylic polymer at increasing concentrations until the percolation threshold was determined at 2 wt.% with a conductivity of 4.26 × 10-4 S/cm. The large increase in viscosity with addition of MWCNT showed the need for a printing system capable of dispensing solutions of up to 613 × 103 cp. Lines were printed with a precision dispensing system mounted in computer controlled x-y-z stages, while an integrated ultraviolet light emission diode dot with a single wavelength of 385 nm cured seconds after the ink was dispensed. The wetting properties of the composite with respect to polyester, polyethylene terephthalate, polyimide, and paper films were analyzed with a goniometer. The relationship between the contact angle, pattern accuracy, and electrical conductivity was determined for each substrate.

  4. Magnetoresistance, electrical conductivity, and Hall effect of glassy carbon

    Energy Technology Data Exchange (ETDEWEB)

    Baker, D.F.

    1983-02-01

    These properties of glassy carbon heat treated for three hours between 1200 and 2700/sup 0/C were measured from 3 to 300/sup 0/K in magnetic fields up to 5 tesla. The magnetoresistance was generally negative and saturated with reciprocal temperature, but still increased as a function of magnetic field. The maximum negative magnetoresistance measured was 2.2% for 2700/sup 0/C material. Several models based on the negative magnetoresistance being proportional to the square of the magnetic moment were attempted; the best fit was obtained for the simplest model combining Curie and Pauli paramagnetism for heat treatments above 1600/sup 0/C. Positive magnetoresistance was found only in less than 1600/sup 0/C treated glassy carbon. The electrical conductivity, of the order of 200 (ohm-cm)/sup -1/ at room temperature, can be empirically written as sigma = A + Bexp(-CT/sup -1/4) - DT/sup -1/2. The Hall coefficient was independent of magnetic field, insensitive to temperature, but was a strong function of heat treatment temperature, crossing over from negative to positive at about 1700/sup 0/C and ranging from -0.048 to 0.126 cm/sup 3//coul. The idea of one-dimensional filaments in glassy carbon suggested by the electrical conductivity is compatible with the present consensus view of the microstructure.

  5. Electrical conductivity, thermal conductivity, and rheological properties of graphene oxide-based nanofluids

    Energy Technology Data Exchange (ETDEWEB)

    Hadadian, Mahboobeh; Goharshadi, Elaheh K., E-mail: gohari@ferdowsi.um.ac.ir [Ferdowsi University of Mashhad, Department of Chemistry (Iran, Islamic Republic of); Youssefi, Abbas [Par-e-Tavous Research Institute (Iran, Islamic Republic of)

    2014-12-15

    Highly stable graphene oxide (GO)-based nanofluids were simply prepared by dispersing graphite oxide with the average crystallite size of 20 nm, in polar base fluids without using any surfactant. Electrical conductivity, thermal conductivity, and rheological properties of the nanofluids were measured at different mass fractions and various temperatures. An enormous enhancement, 25,678 %, in electrical conductivity of distilled water was observed by loading 0.0006 mass fraction of GO at 25 °C. GO–ethylene glycol nanofluids exhibited a non-Newtonian shear-thinning behavior followed by a shear-independent region. This shear-thinning behavior became more pronounced at higher GO concentrations. The maximum ratio of the viscosity of nanofluid to that of the ethylene glycol as a base fluid was 3.4 for the mass fraction of 0.005 of GO at 20 °C under shear rate of 27.5 s{sup −1}. Thermal conductivity enhancement of 30 % was obtained for GO–ethylene glycol nanofluid for mass fraction of 0.07. The measurement of the transport properties of this new kind of nanofluid showed that it could provide an ideal fluid for heat transfer and electronic applications.

  6. Mantle electrical conductivity profile of Niger delta region

    Indian Academy of Sciences (India)

    Daniel N Obiora; Francisca N Okeke; K Yumoto; Stan O Agha

    2014-06-01

    The mantle electrical conductivity-depth profile of the Niger delta region in Nigeria has been determined using solar quiet day ionospheric current (Sq).The magnetometer data obtained in 2010 from geomagnetic stations installed in Lagos by magnetic dataset (MAGDAS) in 2008 and data from magnetometers installed in some parts of Niger delta by Center for Basic Space Science, University of Nigeria, Nsukka, were employed in this study. Gauss spherical harmonic analysis (SHA) method was used to separate the internal and external field contributions to Sq current system. The result depicted that the conductivity profile rose steadily from about 0.032 S/m at a depth of 89 km to 0.041 S/m at 100 km and 0.09 S/m at 221 km. This high conductivity region agreed with the global seismic low velocity region, the asthenosphere. The conductivity profile continued increasing downward until it got to 0.157 S/m at a depth of about 373 km (close to the base of upper mantle), 0.201 S/m at 784 km and reached 0.243 S/m at a depth of 1179 km at the lower mantle.

  7. Electrical Conductivity and Current-Voltage Characteristics of Individual Conducting Polymer PEDOT Nanowires

    Institute of Scientific and Technical Information of China (English)

    LONG Yun-Ze; DUVAIL Jean-Luc; CHEN Zhao-Jia; JIN Ai-Zi; GU Chang-Zhi

    2008-01-01

    We report the current-voltage (I-V) characteristics and electrical conductivity of individual template-synthesized poly(3,4-ethylenedioxythiophene) (PEDOT) nanowires (190 ± 6 nm in diameter and σRT : 11.2±2Ω-1cm-1)over a wide temperature range from 300 to 10K. With lowering temperature, the Ⅰ- Ⅴ characteristics become nonlinear around 50 K, and a clear Coulomb gap-like structure appears in the differential conductance (dI/dV)spectra. The temperature dependence of the resistance below 70 K follows ln R ∝ T-1/2, which can be interpreted as Efros-Shklovskii hopping conduction in the presence of a Coulomb gap. In addition, the influences of measurement methods such as the applied bias voltage magnitude, the two-probe and four-probe techniques used in the resistance measurements are also reported and discussed.

  8. Effect of Cerium on Mechanical Performance and Electrical Conductivity of Aluminum Rod for Electrical Purpose

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    The effect of rare earth element Ce on mechanical performance and electrical conductivity of aluminum rod for electrical purpose were studied under industrial production condition. Using optical microscope, SEM, TEM, EDS and X-ray diffractometer, the microstructure and phase composition of aluminum rod were measured and analyzed. The results indicate that the content of rare earth element Ce is between 0.05%~0.16% in the aluminum rod for electrical purpose. Its tensile strength is enhanced to some extent. The research also discovers that the tensile strength is enhanced remarkably with impurity element Si content increases. Because influence of Si is big to the conductivity, the Si content should be controlled continuously strictly in the aluminum for electrical purpose. Adding rare earth element Ce reduces the solid solubility of Si in the aluminum matrix, and the negative effect of Si on the aluminum conductor reduces effectively. So the limit of in Si content in aluminum rod for electrical purpose can be relaxed moderately.

  9. Convergence of valence bands for high thermoelectric performance for p-type InN

    Science.gov (United States)

    Li, Hai-Zhu; Li, Ruo-Ping; Liu, Jun-Hui; Huang, Ming-Ju

    2015-12-01

    Band engineering to converge the bands to achieve high valley degeneracy is one of effective approaches for designing ideal thermoelectric materials. Convergence of many valleys in the valence band may lead to a high Seebeck coefficient, and induce promising thermoelectric performance of p-type InN. In the current work, we have systematically investigated the electronic structure and thermoelectric performance of wurtzite InN by using the density functional theory combined with semiclassical Boltzmann transport theory. Form the results, it can be found that intrinsic InN has a large Seebeck coefficient (254 μV/K) and the largest value of ZeT is 0.77. The transport properties of p-type InN are better than that of n-type one at the optimum carrier concentration, which mainly due to the large Seebeck coefficient for p-type InN, although the electrical conductivity of n-type InN is larger than that of p-type one. We found that the larger Seebeck coefficient for p-type InN may originate from the large valley degeneracy in the valence band. Moreover, the low minimum lattice thermal conductivity for InN is one key factor to become a good thermoelectric material. Therefore, p-type InN could be a potential material for further applications in the thermoelectric area.

  10. Electrical conductivity and dielectric measurements of CoMTPP

    Energy Technology Data Exchange (ETDEWEB)

    El-Nahass, M.M., E-mail: prof_nahhas@yahoo.com [Physics Department, Faculty of Education, Ain Shams University, Roxy Square 11757, Cairo (Egypt); Atta, A.A. [Physics Department, Faculty of Education, Ain Shams University, Roxy Square 11757, Cairo (Egypt); Department of Physics, Faculty of Science, Taif University, Taif 888 (Saudi Arabia); El-Zaidia, E.F.M.; Farag, A.A.M. [Physics Department, Faculty of Education, Ain Shams University, Roxy Square 11757, Cairo (Egypt); Ammar, A.H. [Physics Department, Faculty of Education, Ain Shams University, Roxy Square 11757, Cairo (Egypt); Physics Department, Faculty of Science and Arts, Taibah University, Al-Ola (Saudi Arabia)

    2014-01-15

    Results of X-ray diffraction patterns (XRD) show that the powder of 5,10, 15,20-Tetrakis(4-methoxyphenyl)-21H,23H-porphine cobalt(II) (CoMTPP) has polycrystalline nature with triclinic structure. Miller's indices, (hkl), values for each diffraction peak in XRD spectrum are calculated. The electrical conductivity and dielectric properties of bulk CoMTPP have been investigated in the frequency range 42 Hz–5 MHz and in the temperature range 298–413 K. The frequency dependence of electrical conductivity, σ (ω, Τ), follows the Jonscher's universal dynamic law. The obtained results have been discussed in terms of the correlated barrier hopping (CBH) model, which is well adapted to CoMTPP semiconductor material. Complex impedance data are obtained at different frequency and temperature. The best fitting for the Cole–Cole plots can be represented by an equivalent circuit element composed of RQC. The conductivity in the direct regime, σ{sub dc}, is described by the variable range hopping (VRH). The values of dielectric constant, ε{sup ′} (ω), and dielectric loss, ε″ (ω), are found to be decrease with increasing frequency due to the interface states capacitance. - Highlights: • Investigation of the structural characterization of CoMTPP thin films using XRD. • The applicability of the CBH model to CoMTPP films. • Impedance spectroscopy is a very useful technique in solid state electronic system. • Dielectric constant and dielectric loss values decrease by increasing frequency.

  11. Acidosis slows electrical conduction through the atrio-ventricular node

    Directory of Open Access Journals (Sweden)

    Ashley Muir Nisbet

    2014-06-01

    Full Text Available Acidosis affects the mechanical and electrical activity of mammalian hearts but comparatively little is known about its effects on the function of the atrio-ventricular node (AVN. In this study, the electrical activity of the epicardial surface of the left ventricle of isolated Langendorff-perfused rabbit hearts was examined using optical methods. Perfusion with hypercapnic Tyrode’s solution (20% CO2, pH 6.7 increased the time of earliest activation (Tact from 100.5+7.9 to 166.1+7.2ms (n=8 at a pacing cycle length (PCL of 300ms (37oC. Tact increased at shorter PCL, and the hypercapnic solution prolonged Tact further: at 150ms PCL, Tact was prolonged from 131.0+5.2 to 174.9+16.3ms. 2:1 AVN block was common at shorter cycle lengths. Atrial and ventricular conduction times were not significantly affected by the hypercapnic solution suggesting that the increased delay originated in the AVN. Isolated right atrial preparations were superfused with Tyrode’s solutions at pH 7.4 (control, 6.8 and 6.3. Low pH prolonged the atrial-Hisian (AH interval, the effective and functional refractory periods and Wenckebach cycle length significantly. Complete AVN block occurred in 6 out of 9 preparations. Optical imaging of conduction at the AV junction revealed increased conduction delay in the region of the AVN, with less marked effects in atrial and ventricular tissue. Thus acidosis can dramatically prolong the AVN delay, and in combination with short cycle lengths, this can cause partial or complete AVN block and is therefore implicated in the development of brady-arrhythmias in conditions of local or systemic acidosis.

  12. Interdiffusion and Spinodal Decomposition in Electrically Conducting Polymer Blends

    Directory of Open Access Journals (Sweden)

    Antti Takala

    2015-08-01

    Full Text Available The impact of phase morphology in electrically conducting polymer composites has become essential for the efficiency of the various functional applications, in which the continuity of the electroactive paths in multicomponent systems is essential. For instance in bulk heterojunction organic solar cells, where the light-induced electron transfer through photon absorption creating excitons (electron-hole pairs, the control of diffusion of the spatially localized excitons and their dissociation at the interface and the effective collection of holes and electrons, all depend on the surface area, domain sizes, and connectivity in these organic semiconductor blends. We have used a model semiconductor polymer blend with defined miscibility to investigate the phase separation kinetics and the formation of connected pathways. Temperature jump experiments were applied from a miscible region of semiconducting poly(alkylthiophene (PAT blends with ethylenevinylacetate-elastomers (EVA and the kinetics at the early stages of phase separation were evaluated in order to establish bicontinuous phase morphology via spinodal decomposition. The diffusion in the blend was followed by two methods: first during a miscible phase separating into two phases: from the measurement of the spinodal decomposition. Secondly the diffusion was measured by monitoring the interdiffusion of PAT film into the EVA film at elected temperatures and eventually compared the temperature dependent diffusion characteristics. With this first quantitative evaluation of the spinodal decomposition as well as the interdiffusion in conducting polymer blends, we show that a systematic control of the phase separation kinetics in a polymer blend with one of the components being electrically conducting polymer can be used to optimize the morphology.

  13. Hexagonally-arranged-nanoporous and continuous NiO films with varying electrical conductivity

    Energy Technology Data Exchange (ETDEWEB)

    Gutiérrez, A., E-mail: a.gutierrez@uam.es [Departamento de Física Aplicada and Instituto de Ciencia de Materiales Nicolás Cabrera, Universidad Autónoma de Madrid, Cantoblanco, E-28049 Madrid (Spain); Domínguez-Cañizares, G. [Departamento de Física Aplicada and Instituto de Ciencia de Materiales Nicolás Cabrera, Universidad Autónoma de Madrid, Cantoblanco, E-28049 Madrid (Spain); Jiménez, J.A. [Centro Nacional de Investigaciones Metalúrgicas, CSIC, Avda Gregorio del Amo 8, E-28040 Madrid (Spain); Preda, I. [European Synchrotron Radiation Facility, BP 220, F-38043 Grenoble Cedex 9 (France); Díaz-Fernández, D. [Departamento de Física Aplicada and Instituto de Ciencia de Materiales Nicolás Cabrera, Universidad Autónoma de Madrid, Cantoblanco, E-28049 Madrid (Spain); Jiménez-Villacorta, F. [Department of Chemical Engineering, Northeastern University, 360 Huntington Ave., Boston, MA 02115 (United States); Castro, G.R. [European Synchrotron Radiation Facility, BP 220, F-38043 Grenoble Cedex 9 (France); Instituto de Ciencia de Materiales de Madrid, CSIC, Sor Juana Inés de la Cruz, 3, E-28049 Madrid (Spain); Chaboy, J. [Instituto de Ciencia de Materiales de Aragón, CSIC, and Departamento de Física de la Materia Condensada, Universidad de Zaragoza, E-50009 Zaragoza (Spain); Soriano, L. [Departamento de Física Aplicada and Instituto de Ciencia de Materiales Nicolás Cabrera, Universidad Autónoma de Madrid, Cantoblanco, E-28049 Madrid (Spain)

    2013-07-01

    Nickel oxide (NiO) thin films have been prepared by magnetron sputtering, with different Ar/O{sub 2} ratios in the plasma, on several substrates, including hexagonally arranged nanoporous anodic alumina membranes (AAM). The obtained films exhibit columnar growth, which makes it possible to preserve the hexagonal order of the AAM substrates in the NiO thin films. X ray diffraction patterns show a polycrystalline structure with a crystallographic texture that depends on the plasma composition. Additionally, the NiO lattice parameter increases with the oxygen content of the plasma. The presence of oxygen during deposition is responsible for these structural changes, as well as for an oxygen enrichment in the NiO films, which leads to changes in their electrical properties. The electrical resistivity of the films decreases with the oxygen content of the plasma, which suggests p-type conductivity due to oxygen enrichment in the NiO lattice. Indeed, an analysis of the EXAFS oscillations at the Ni–K edge confirms the lattice expansion and a decrease of the Ni–Ni coordination number when the oxygen content of the plasma increases, which points towards an increasing presence of Ni vacancies for larger values of the O{sub 2}/Ar ratio.

  14. Modulation Electric Field Intensity Sensor in a Conductive Medium

    Directory of Open Access Journals (Sweden)

    O. I. Miseyk

    2015-01-01

    Full Text Available The requirement to conduct measurements across the big water areas and in the ocean depths arises a problem of creating devices to measure an electric field, being either set on the high-speed mobile carriers, or implemented as the sounders, which investigate a vertical or horizontal structure of the electric field of ocean. Manufactured, designed, and hypothetical devices for measuring poor electric fields of the ocean were analyzed. The analysis allowed us to prove that there is a need in creation of modulation sensors (with modulation of a non-electric origin either with periodically changing capabilities of measuring bases, or with space-changing (and therefore, time-changing position of measuring base of primary converters, as the most effective in terms of allocation and measurement of the modulated signal from unmodulated noise.The paper considers the mathematical models of modulation sensors of electric field intensity in the ultralow-frequency range, which are set on the mobile carriers. It justifies a choice of two basic models of primary converters with a change of the measuring base in space, i.e. with the "changing" base and with the "rotating" base. A feature of the offered models with vertical sounding is the minimum value of noise because of rotation of measuring electrodes in a magnetic field of Earth, and hydrodynamic noise. The paper shows that noise caused by the relative movement of sensor and water completely disappears in two cases:1. for a vertical sounder in the autonomous mode or a horizontal sounder with zero buoyancy in the specified shape of water;2. in a case when the sensor has no component of measuring base in the considered area, for example, for the sensor with in-line array of electrodes located in the horizontal plane.The paper proves advantage of the model with "rotating" measuring base, which provides the maximum power transfer from the primary converter to loading for all relative positions of an external

  15. Development of Novel Alternative Technologies for Decontamination of Warfare Agents: Electric Heating with Intrinsically Conductive Polymers

    Science.gov (United States)

    2007-11-02

    in converting electric energy to thermal energy for the decon applications. Other conductive materials, such as polythiophenes , polypyrroles, carbon...Development of Novel Alternative Technologies for Decontamination of Warfare Agents: Electric Heating with Intrinsically Conductive Polymers...Joule)-heating with conducting polymers. The basic concept is that electrically conducting polymers, such as polyaniline, can be used as coatings or

  16. Electrical conductivity of carbonaceous chondrites and electric heating of meteorite parent bodies

    Science.gov (United States)

    Duba, AL

    1987-01-01

    Electromagnetic heating of rock-forming materials most probably was an important process in the early history of the solar system. Electrical conductivity experiments of representative materials such as carbonaceous chondrites are necessary to obtain data for use in electromagnetic heating models. With the assumption that carbon was present at grain boundaries in the material that comprised the meteorite parent bodies, the electrical heating of such bodies was calculated as a function of body size and solar distance using the T-Tauri model of Sonett and Herbert (1977). The results are discussed.

  17. Hall and thermoelectric evaluation of p-type InAs

    Energy Technology Data Exchange (ETDEWEB)

    Wagener, M.C., E-mail: magnus.wagener@nmmu.ac.z [Department of Physics, Nelson Mandela Metropolitan University, Port Elizabeth (South Africa); Wagener, V.; Botha, J.R. [Department of Physics, Nelson Mandela Metropolitan University, Port Elizabeth (South Africa)

    2009-12-15

    This paper compares the galvanometric and thermoelectric evaluation of the electrical characteristics of narrow gap semiconductors. In particular, the influence of a surface inversion layer is incorporated into the analysis of the temperature-dependent Hall and thermoelectric measurements of p-type InAs. The temperature at which the Seebeck coefficient of p-type material changes sign is shown to be unaffected by the presence of degenerate conduction paths. This finding consequently facilitated the direct determination of the acceptor density of lightly doped thin film InAs.

  18. Processing and electrical conductivity of lanthanum gallate core-shell heterostructures

    Directory of Open Access Journals (Sweden)

    Gomes, Eduarda

    2006-06-01

    Full Text Available The electrical properties of a lanthanum gallate solid electrolyte were modified by selectively doping the grain boundaries with Fe. This was achieved by sandwiching a La0.95Sr0.05Ga0.90Mg0.10O3-δ (LSGM dense pellet between LaFeO3 samples. Annealing at 1550°C in air for several hours promoted Fe diffusion into LSGM via the grain boundaries. Scanning electron microscopy and energy-dispersive spectroscopy analyses showed that iron was located at the grain boundary while the grain bulk preserved the LSGM composition. Impedance spectra obtained at low temperature consist of the two usual bulk and grain boundary contributions. A significant increase in total conductivity was observed for the iron-doped samples, the effect being greater for the grain boundary contribution. The total conductivity measured for the iron-containing material revealed a slight decrease with decreasing oxygen partial pressure, suggesting the onset of p-type electronic conduction. Estimates of the p-type electronic conductivity (σp were obtained by fitting the low temperature impedance spectra to a simple equivalent circuit including one parallel electronic branch. The value for σp in air at 300°C is 3.1×10-6 S/cm and the activation energy is 75.1 kJ/mol between 300 and 400°C.

    Las propiedades elécticas de un electrolito sólido de galato de lantano se han modificado mediante un dopado eléctrico de Fe en borde de grano. Esto se consiguió preparando una estructura de sandwich con una plantilla densa de La0.95Sr0.05Ga0.90Mg0.10O3-δ (LSGM entre las muestras de LaFeO3. Un tratamiento de varias horas a 1550ºC en aire favoreció la difusión de Fe a lo largo de los bordes de grano. Los análisis mediante microscopia electrónica de barrido y espectroscopía de energía dispersada muestran que el hierro se localiza en borde de grano mientras que se preserva la composición de LSGM en el interior de grano. En las muestras dopadas con hierro se observa un aumento de

  19. Electrical conductivity of intermediate magmas from Uturuncu Volcano (Bolivia)

    Science.gov (United States)

    Laumonier, Mickael; Gaillard, Fabrice; Sifre, David

    2015-04-01

    Magmas erupted at Uturuncu volcano (South Bolivia) comes from the Altiplano-Puna Magma Body (APMB, Chile-Bolivia), a crustal massive body of 80 km long by 10 km thick located at ~ 35 km depth named. Recent magneto telluric surveys reveal a resistivity lower than 1 ohm.m due to the presence of melt which could result in the reactivation of the volcano. In order to better constrain the resistivity profiles and thus the conditions of magma storage of the APMB, we have performed in situ electrical measurements on natural dacites and andesites from Uturuncu with a 4-wire set up in a piston cylinder and internally heated pressure vessel. The range of temperature (500 to 1300°C), pressure (0.3 to 2 Gpa), and the various water contents covers the respective ranges occurring at natural conditions. The results show that the conductivity increases with the temperature and the water content but slightly decreases with the pressure. Then a model was built from these results so as to help in (i) interpreting the electrical signature of natural magmas, (ii) constraining their conditions (chemical composition, temperature, pressure, water content, melt fraction) from the source to the storage location and (iii) providing information on the interior structure of a volcano and its reservoir.

  20. Electrically and Thermally Conducting Nanocomposites for Electronic Applications

    Directory of Open Access Journals (Sweden)

    Daryl Santos

    2010-02-01

    Full Text Available Nanocomposites made up of polymer matrices and carbon nanotubes are a class of advanced materials with great application potential in electronics packaging. Nanocomposites with carbon nanotubes as fillers have been designed with the aim of exploiting the high thermal, electrical and mechanical properties characteristic of carbon nanotubes. Heat dissipation in electronic devices requires interface materials with high thermal conductivity. Here, current developments and challenges in the application of nanotubes as fillers in polymer matrices are explored. The blending together of nanotubes and polymers result in what are known as nanocomposites. Among the most pressing current issues related to nanocomposite fabrication are (i dispersion of carbon nanotubes in the polymer host, (ii carbon nanotube-polymer interaction and the nature of the interface, and (iii alignment of carbon nanotubes in a polymer matrix. These issues are believed to be directly related to the electrical and thermal performance of nanocomposites. The recent progress in the fabrication of nanocomposites with carbon nanotubes as fillers and their potential application in electronics packaging as thermal interface materials is also reported.

  1. Electrical conductance of carbon nanotubes with misaligned ends

    Energy Technology Data Exchange (ETDEWEB)

    Pantano, Antonio, E-mail: antonio.pantano@unipa.it; Muratore, Giuseppe; Montinaro, Nicola [Universita degli Studi di Palermo, Dipartimento di Ingegneria Chimica, Gestionale, Informatica e Meccanica (Italy)

    2013-09-15

    During a manufacturing process, when a straight carbon nanotube is placed on a substrate, e.g., production of transistors, its two ends are often misaligned. In this study, we investigate the effects of multiwall carbon nanotubes' (MWCNTs) outer diameter and chirality on the change in conductance due to misalignment of the two ends. The length of the studied MWCNTs was 120 nm, while the diameters ranged between 4 and 7 nm. A mixed finite element-tight-binding approach was carefully designed to realize reduction in computational time by orders of magnitude in calculating the deformation-induced changes in the electrical transport properties of the nanotubes. Numerical results suggest that armchair MWCNTs of small diameter should work better if used as conductors, while zigzag MWCNTs of large diameter are more suitable for building sensors.Graphical Abstract.

  2. Facile synthesis of boron nitride nanotubes and improved electrical conductivity.

    Science.gov (United States)

    Chen, Yongjun; Luo, Lijie; Zhou, Longchang; Mo, Libin; Tong, Zhangfa

    2010-02-01

    A layer of catalyst film on substrate is usually required during the vapor-liquid-solid (VLS) growth of one-dimensional (1D) nanomaterials. In this work, however, a novel approach for synthesizing high-purity bamboo-like boron nitride (BN) nanotubes directly on commercial stainless steel foils was demonstrated. Synthesis was realized by heating boron and zinc oxide (ZnO) powders at 1200 degrees C under a mixture gas flow of nitrogen and hydrogen. The stainless steel foils played an additional role of catalyst besides the substrate during the VLS growth of the nanotubes. In addition, the electrical conductivity of the BN nanotubes was efficiently improved in a simple way by coating with Au and Pd nanoparticles. The decorated BN nanotubes may find potential applications in catalysts, sensors and nanoelectronics.

  3. TASER conducted electrical weapons and implanted pacemakers and defibrillators.

    Science.gov (United States)

    Vanga, Subba R; Bommana, Sudharani; Kroll, Mark W; Swerdlow, Charles; Lakkireddy, Dhanunjaya

    2009-01-01

    Conducted electrical weapons (CEW) have generated controversy in recent years regarding their effect on heart rhythm and on their suspected interaction with implanted devices such as the pacemakers and ICDs (implantable cardioverter defibrillators). We review the current evidence available on device interactions and pre-sent a new case series of 6 patients. We used the available case reports and animal studies on TASER or CEW related publications in PubMed. Oversensing of TASER CEW discharges may cause noise reversion pacing in pacemakers and inappropriate detection of VF in ICDs. The nominal 5-second discharge is sufficiently short that neither clinically significant inhibition of bradycardia pacing nor inappropriate ICD shocks have been reported. Current evidence indicates that CEW discharges do not have adverse effects on pacemakers and ICDs.

  4. Electrical conductivity and viscosity of borosilicate glasses and melts

    DEFF Research Database (Denmark)

    Ehrt, Doris; Keding, Ralf

    2009-01-01

    , 0 to 62·5 mol% B2O3, and 25 to 85 mol% SiO2. The glass samples were characterised by different methods. Refractive indices, density and thermal expansion were measured. Phase separation effects were investigated by electron microscopy. The electrical conductivity of glasses and melts were determined...... by impedance measurements in a wide temperature range (250 to 1450°C). The activation energies were calculated by Arrhenius plots in various temperature regions: below the glass transition temperature, Tg, above the melting point, Tl, and between Tg and Tl. Viscosity measurements were carried out...... with different methods from Tg to the melt. The measured data were fitted and the activation energies calculated. Simple exponential behaviour was found only in very narrow temperature ranges. The effect of B2O3 in sodium borosilicate glasses and melts is discussed in comparison with sodium silicate glasses...

  5. Electrically conductive, optically transparent polymer/carbon nanotube composites

    Science.gov (United States)

    Connell, John W. (Inventor); Smith, Jr., Joseph G. (Inventor); Harrison, Joycelyn S. (Inventor); Park, Cheol (Inventor); Watson, Kent A. (Inventor); Ounaies, Zoubeida (Inventor)

    2011-01-01

    The present invention is directed to the effective dispersion of carbon nanotubes (CNTs) into polymer matrices. The nanocomposites are prepared using polymer matrices and exhibit a unique combination of properties, most notably, high retention of optical transparency in the visible range (i.e., 400-800 nm), electrical conductivity, and high thermal stability. By appropriate selection of the matrix resin, additional properties such as vacuum ultraviolet radiation resistance, atomic oxygen resistance, high glass transition (T.sub.g) temperatures, and excellent toughness can be attained. The resulting nanocomposites can be used to fabricate or formulate a variety of articles such as coatings on a variety of substrates, films, foams, fibers, threads, adhesives and fiber coated prepreg. The properties of the nanocomposites can be adjusted by selection of the polymer matrix and CNT to fabricate articles that possess high optical transparency and antistatic behavior.

  6. Polymeric salt bridges for conducting electric current in microfluidic devices

    Science.gov (United States)

    Shepodd, Timothy J.; Tichenor, Mark S.; Artau, Alexander

    2009-11-17

    A "cast-in-place" monolithic microporous polymer salt bridge for conducting electrical current in microfluidic devices, and methods for manufacture thereof is disclosed. Polymeric salt bridges are formed in place in capillaries or microchannels. Formulations are prepared with monomer, suitable cross-linkers, solvent, and a thermal or radiation responsive initiator. The formulation is placed in a desired location and then suitable radiation such as UV light is used to polymerize the salt bridge within a desired structural location. Embodiments are provided wherein the polymeric salt bridges have sufficient porosity to allow ionic migration without bulk flow of solvents therethrough. The salt bridges form barriers that seal against fluid pressures in excess of 5000 pounds per square inch. The salt bridges can be formulated for carriage of suitable amperage at a desired voltage, and thus microfluidic devices using such salt bridges can be specifically constructed to meet selected analytical requirements.

  7. Vortex Lines and Monopoles in Electrically Conducting Plasmas

    Institute of Scientific and Technical Information of China (English)

    WANG Ji-Biao; REN Ji-Rong; LI Ran

    2009-01-01

    Based on the C-mapping topological current theory and the decomposition of gauge potential theory, the vortex lines and the monopoles in electrically conducting plasmas are studied.It is pointed out that these two topological structures respectively inhere in two-dimensional and three-dimensional topological currents, which can be derived from the same topological term , and both these topological structures are characterized by the φ-mapping topological numbers-Hopf indices and Brouwer degrees.Furthermore, the spatial bifurcation of vortex lines and the generation and annihilation of monopoles are also discussed.At last, we point out that the Hopf invariant is a proper topological invariant to describe the knotted solitons.

  8. System and method for determining velocity of electrically conductive fluid

    Science.gov (United States)

    Polzin, Kurt A. (Inventor); Korman, Valentin (Inventor); Markusic, Thomas E. (Inventor); Stanojev, Boris Johann (Inventor)

    2008-01-01

    A flowing electrically-conductive fluid is controlled between an upstream and downstream location thereof to insure that a convection timescale of the flowing fluid is less than a thermal diffusion timescale of the flowing fluid. First and second nodes of a current-carrying circuit are coupled to the fluid at the upstream location. A current pulse is applied to the current-carrying circuit so that the current pulse travels through the flowing fluid to thereby generate a thermal feature therein at the upstream location. The thermal feature is convected to the downstream location where it is monitored to detect a peak associated with the thermal feature so-convected. The velocity of the fluid flow is determined using a time-of-flight analysis.

  9. Genetic aspects of milk electrical conductivity in Italian Brown cattle

    Directory of Open Access Journals (Sweden)

    Martino Cassandro

    2010-01-01

    Full Text Available Electrical conductivity (EC of milk is defined as an indicator of the udder health. The EC is a low cost and easy recordable information in dairy herds with automatic milking systems. The heritability of EC showed to be higher than somatic cell count and for this reason might be an useful trait for indirect selection for mastitis resistance. The heritability for EC in Italian Brown cattle was equal to 0.23. Therefore, EC could be useful not only for dairy cows management but also for selection of dairy cows. The high correlation between breeding values for SCC and EC is promising in order for improving mastitis resistance and functional ability of dairy cows.

  10. Reduction Kinetics and Electrical Conductivity in Lead Disilicate Glasses.

    Science.gov (United States)

    Kumar, Sajal

    Reduced lead silicate based glasses constitute the active element in night vision devices. The thermochemical reduction of these glasses is necessary to render them electronically conducting. In this thesis some of the more important reduction parameters and their influence on the post-reduction have been identified. The aim of this work was to establish the conduction mechanism(s) responsible in these glasses. The samples were reduced in hydrogen of varying moisture content, in the temperature range of 330-500 ^circC for various times. X-ray diffraction and thermogravimetric measurements clearly established that the reduction resulted in the formation of metallic lead islands with a diameter of ~4 nm, with an inter-island spacing of ~ 3.4 nm. In contrast to the electrical conductivity, the microstructure was found to be a weak function of reduction parameters. No coarsening of the microstructure was observed even after extended anneals at high temperatures, strongly suggesting that the final lead-island size was dictated by the size of the holes either present in the parent glass or formed as a result of reduction, in an otherwise rigid glass network. The electronic conductivity was found to go through a minimum with reduction temperature. Increasing the moisture content of the reducing gas resulted in an increase in the post-reduction resistance and in the sharpness of the minimum. The post-reduction activation energies were measured to be ~0.09 eV and found to be independent of all reduction variables, indicating that a single conduction mechanism was operative in all cases. The variation in conductivity was ascribed to variation in the number of mobile carriers. The mechanism of conduction was proposed to be that of a bipolaron hopping between Pb^{4+} and Pb ^{2+} ions, the former forming as a result of a disproportionation reaction that takes place during reduction and/or cooling of the samples from the reduction temperature. The electron transport is believed

  11. Improved phenol adsorption from aqueous solution using electrically conducting adsorbents

    Energy Technology Data Exchange (ETDEWEB)

    Asghar, Hafiz Muhammad Anwaar; Hussain, Syed Nadir [The University of Manchester, Manchester (United Kingdom); Sattar, Hamed [University of Leeds, Leeds (United Kingdom); Brown, Nigel Willis [Daresbury Innovation Centre, Cheshire (United Kingdom); Roberts, Edward Pelham Lindfield [University of Calgary, Calgary (Canada)

    2014-05-15

    The electrically conducting and partially porous graphite based adsorbent (called Nyex{sup TM} 2000) was tested for its adsorption capacity and electrochemical regeneration ability for the removal of phenol from aqueous solution. Nyex{sup TM} 2000 was tested in comparison with Nyex{sup TM} 1000, which is currently being used for a number of industrial waste water treatment applications. Nyex{sup TM} 1000 exhibited small adsorption capacity of 0.1 mg g{sup -1} for phenol because of having small specific surface area of 1 m{sup 2} g{sup -1}. In contrast, Nyex{sup TM} 2000 with specific surface area of 17 m{sup 2} g{sup -1} delivered an adsorption capacity of 0.8 mg g{sup -1}, which was eight-fold higher than that of Nyex{sup TM} 1000. Nyex{sup TM} 2000 was successfully electrochemically regenerated by passing a current of 0.5 A, charge passed of 31 C g{sup -1} for a treatment time of 45 minutes. These electrochemical parameters were comparable to Nyex{sup TM} 1000 for which a current of 0.5 A, charge passed of 5 C g{sup -1} for a treatment time of 20 minutes were applied for complete oxidation of adsorbed phenol. The comparatively high charge density was found to be required for Nyex{sup TM} 2000, which is justified with its higher adsorption capacity. The FTIR results validated the mineralization of adsorbed phenol into CO{sub 2} and H{sub 2}O except the formation of few by-products, which were in traces when compared with the concentration of phenol removed from aqueous solution. The electrical energy as required for electrochemical oxidation of phenol adsorbed onto Nyex{sup TM} 1000 and 2000 was found to be 214 and 196 J mg{sup -1}, respectively. The comparatively low energy requirement for electrochemical oxidation using Nyex{sup TM} 2000 is consistent with its higher bed electrical conductivity, which is twice that of Nyex{sup TM} 1000.

  12. DNA origami metallized site specifically to form electrically conductive nanowires.

    Science.gov (United States)

    Pearson, Anthony C; Liu, Jianfei; Pound, Elisabeth; Uprety, Bibek; Woolley, Adam T; Davis, Robert C; Harb, John N

    2012-09-06

    DNA origami is a promising tool for use as a template in the design and fabrication of nanoscale structures. The ability to engineer selected staple strands on a DNA origami structure provides a high density of addressable locations across the structure. Here we report a method using site-specific attachment of gold nanoparticles to modified staple strands and subsequent metallization to fabricate conductive wires from DNA origami templates. We have modified DNA origami structures by lengthening each staple strand in select regions with a 10-base nucleotide sequence and have attached DNA-modified gold nanoparticles to the lengthened staple strands via complementary base-pairing. The high density of extended staple strands allowed the gold nanoparticles to pack tightly in the modified regions of the DNA origami, where the measured median gap size between neighboring particles was 4.1 nm. Gold metallization processes were optimized so that the attached gold nanoparticles grew until gaps between particles were filled and uniform continuous nanowires were formed. Finally, electron beam lithography was used to pattern electrodes in order to measure the electrical conductivity of metallized DNA origami, which showed an average resistance of 2.4 kΩ per metallized structure.

  13. Electrical conduction and dielectric studies of ZnO pellets

    Energy Technology Data Exchange (ETDEWEB)

    Chaari, Mariem, E-mail: m_chaari@yahoo.fr [Laboratory of Composite Ceramic and Polymer Materials (LaMaCoP), Scientific Faculty of Sfax, Route of the Soukra Km 4, Sfax 3038 (Tunisia); Matoussi, Adel [Laboratory of Composite Ceramic and Polymer Materials (LaMaCoP), Scientific Faculty of Sfax, Route of the Soukra Km 4, Sfax 3038 (Tunisia)

    2012-09-01

    A series of Zinc Oxide pellets sintered at different temperatures was studied by means of dielectric spectroscopy in the wide frequency range of 1-10{sup 6} Hz and temperature interval from -100 Degree-Sign C to 30 Degree-Sign C. Electrical conductivity was analysed using Jonsher's universal power law, and the values of s were found to decrease with the increase in temperature, which agrees well with the correlation barrier hopping (CBH) model. As the temperature increased, energy activation E{sub dc} became less than 0.39 eV and dc conductivity ({sigma}{sub dc}) values in the range of 1.9 Multiplication-Sign 10{sup -14}-9.7 Multiplication-Sign 10{sup -10} {Omega} m{sup -1} were observed. The dielectric modulus showed ionic polarisation at the intermediate and high frequencies related to oxygen interstitial O{sub i}, oxygen vacancy V{sub O} and Zinc interstitial Zn{sub i}. At low frequency, it revealed a Maxwell-Wagner-Sillars relaxation with barrier heights of grain boundaries between 0.74 and 0.88 eV for all the studied pellets.

  14. Thermal and electrical conductivity of iron at Earth's core conditions.

    Science.gov (United States)

    Pozzo, Monica; Davies, Chris; Gubbins, David; Alfè, Dario

    2012-04-11

    The Earth acts as a gigantic heat engine driven by the decay of radiogenic isotopes and slow cooling, which gives rise to plate tectonics, volcanoes and mountain building. Another key product is the geomagnetic field, generated in the liquid iron core by a dynamo running on heat released by cooling and freezing (as the solid inner core grows), and on chemical convection (due to light elements expelled from the liquid on freezing). The power supplied to the geodynamo, measured by the heat flux across the core-mantle boundary (CMB), places constraints on Earth's evolution. Estimates of CMB heat flux depend on properties of iron mixtures under the extreme pressure and temperature conditions in the core, most critically on the thermal and electrical conductivities. These quantities remain poorly known because of inherent experimental and theoretical difficulties. Here we use density functional theory to compute these conductivities in liquid iron mixtures at core conditions from first principles--unlike previous estimates, which relied on extrapolations. The mixtures of iron, oxygen, sulphur and silicon are taken from earlier work and fit the seismologically determined core density and inner-core boundary density jump. We find both conductivities to be two to three times higher than estimates in current use. The changes are so large that core thermal histories and power requirements need to be reassessed. New estimates indicate that the adiabatic heat flux is 15 to 16 terawatts at the CMB, higher than present estimates of CMB heat flux based on mantle convection; the top of the core must be thermally stratified and any convection in the upper core must be driven by chemical convection against the adverse thermal buoyancy or lateral variations in CMB heat flow. Power for the geodynamo is greatly restricted, and future models of mantle evolution will need to incorporate a high CMB heat flux and explain the recent formation of the inner core.

  15. Electrically-conductive proppant and methods for making and using same

    Energy Technology Data Exchange (ETDEWEB)

    Cannan, Chad; Roper, Todd; Savoy, Steve; Mitchell, Daniel R.

    2016-09-06

    Electrically-conductive sintered, substantially round and spherical particles and methods for producing such electrically-conductive sintered, substantially round and spherical particles from an alumina-containing raw material. Methods for using such electrically-conductive sintered, substantially round and spherical particles in hydraulic fracturing operations.

  16. Effects of physical properties on electrical conductivity of compacted lateritic soil

    Institute of Scientific and Technical Information of China (English)

    Wei Bai; Lingwei Kong; Aiguo Guo

    2013-01-01

    Natural soils of various types have different electrical properties due to the composition, structure, water content, and temperature. In order to investigate the electrical properties of lateritic soil, electrical con-ductivity experiments have been conducted on a self-developed testing device. Test results show that the electrical conductivity of laterite increases with the increase of water content, degree of saturation and dry density. When the water content is below the optimum water content, the electrical conductivity of soils increases nonlinearly and the variation rate increases dramatically. However, when the water content, degree of saturation, or dry density increases to a certain value, the electrical conductivity tends to be a constant. In addition, soil electrical conductivity increases with the increase of temperature, and it is observed that the electrical conductivity decreases with the increase of the number of wetting-drying cycles.

  17. Effect of Electric Field on Conductivity and Vickers Hardness of an Al-Li Alloy

    Science.gov (United States)

    Liu, Bing; Chen, Da-Rong; Chen, Zheng; Wang, Yong-Xin; Li, Xiao-Ling

    2003-11-01

    Static electric fields were applied on an aluminium-lithium alloy during solution treatment. The conductivity and Vickers hardness of the quenched Al-Li alloy is changed with the effect of electric field. The Vickers hardness increases with the applied electric field for a certain solutionizing time but decreases with the time under an electric field. In the absence of the electric field, the Vickers hardness and the conductivity increase synchronously, while reversed after electric field treatment. Positive and negative electric fields had the similar effect. The change of the local electron density in alloy caused by electric field is presented to explain the effect.

  18. Effect of Electric Field on Conductivity and Vickers Hardness of an A1-Li Alloy

    Institute of Scientific and Technical Information of China (English)

    刘兵; 陈大融; 陈铮; 王永欣; 李晓玲

    2003-01-01

    Static electric fields were applied on an aluminium-lithium alloy during solution treatment.The conductivity and Vickers hardness of the quenched Al-Li alloy is changed with the effect of electric field.The Vickers hardness increases with the applied electric field for a certain solutionizing time but decreases with the time under an electric field.In the absence of the electric field,the Vickers hardness and the conductivity increase synchronously,while reversed after electric field treatment.Positive and negative electric fields had the similar effect.The change of the local electron density in alloy caused by electric field is presented to explain the effect.

  19. EFFECTS OF TRITIUM GAS EXPOSURE ON ELECTRICALLY CONDUCTING POLYMERS

    Energy Technology Data Exchange (ETDEWEB)

    Kane, M.; Clark, E.; Lascola, R.

    2009-12-16

    Effects of beta (tritium) and gamma irradiation on the surface electrical conductivity of two types of conducting polymer films are documented to determine their potential use as a sensing and surveillance device for the tritium facility. It was shown that surface conductivity was significantly reduced by irradiation with both gamma and tritium gas. In order to compare the results from the two radiation sources, an approximate dose equivalence was calculated. The materials were also sensitive to small radiation doses (<10{sup 5} rad), showing that there is a measurable response to relatively small total doses of tritium gas. Spectroscopy was also used to confirm the mechanism by which this sensing device would operate in order to calibrate this sensor for potential use. It was determined that one material (polyaniline) was very sensitive to oxidation while the other material (PEDOT-PSS) was not. However, polyaniline provided the best response as a sensing material, and it is suggested that an oxygen-impermeable, radiation-transparent coating be applied to this material for future device prototype fabrication. A great deal of interest has developed in recent years in the area of conducting polymers due to the high levels of conductivity that can be achieved, some comparable to that of metals [Gerard 2002]. Additionally, the desirable physical and chemical properties of a polymer are retained and can be exploited for various applications, including light emitting diodes (LED), anti-static packaging, electronic coatings, and sensors. The electron transfer mechanism is generally accepted as one of electron 'hopping' through delocalized electrons in the conjugated backbone, although other mechanisms have been proposed based on the type of polymer and dopant [Inzelt 2000, Gerard 2002]. The conducting polymer polyaniline (PANi) is of particular interest because there are extensive studies on the modulation of the conductivity by changing either the oxidation

  20. Spin-dependent electrical conduction in a pentacene Schottky diode explored by electrically detected magnetic resonance

    Science.gov (United States)

    Fukuda, Kunito; Asakawa, Naoki

    2017-02-01

    Reported is the observation of dark spin-dependent electrical conduction in a Schottky barrier diode with pentacene (PSBD) using electrically detected magnetic resonance at room temperature. It is suggested that spin-dependent conduction exists in pentacene thin films, which is explored by examining the anisotropic linewidth of the EDMR signal and current density-voltage (J-V) measurements. The EDMR spectrum can be decomposed to Gaussian and Lorentzian components. The dependency of the two signals on the applied voltage was consistent with the current density-voltage (J-V) of the PSBD rather than that of the electron-only device of Al/pentacene/Al, indicating that the spin-dependent conduction is due to bipolaron formation associated with hole polaronic hopping processes. The applied-voltage dependence of the ratio of intensity of the Gaussian line to the Lorentzian may infer that increasing current density should make conducting paths more dispersive, thereby resulting in an increased fraction of the Gaussian line due to the higher dispersive g-factor.

  1. Review on Optical and Electrical Properties of Conducting Polymers

    Directory of Open Access Journals (Sweden)

    Manisha Bajpai

    2016-01-01

    Full Text Available We reviewed optical and electrical properties of conjugated polymers. The charge transport models to describe the hole and electron transport mechanism are also included in the electrical properties of conjugated polymers. The effect of optical and electrical properties after doping is also indexed in this paper.

  2. Electrical conduction and glass relaxation in alkali- silicate glasses

    Science.gov (United States)

    Angel, Paul William

    Electrical response measurements from 1 Hz to 1 MHz between 50o and 540oC were made on potassium, sodium and lithium-silicate glasses with low alkali oxide contents. Conductivity and electrical relaxation responses for both annealed and air quenched glasses of the same composition were compared. Quenching was found to lower the dc conductivity, σdc, and activation energy as well as increase the pre-exponential term when compared to the corresponding annealed glass of the same composition. All of the glasses exhibited Arrhenius behavior in the log σdc against 1/T plots. A sharp decrease in σdc was observed for glasses containing alkali concentrations of 7 mol% or less. The σdc activation energy exhibited similar behavior when plotted as a function of alkali composition and was explained in terms of a mixture of the weak and strong electrolyte models. The depression angle for fits to the complex impedance data were also measured as a function of thermal history, alkali concentration and alkali species. These results were interpreted in terms of changes in the distribution of relaxation times. Annealed samples from a single melt of a 10 mol% K2O-90SiO2 glass were reheated to temperatures ranging from 450o to 800oC, held isothermally for 20 min, and then quenched in either air or silicon oil. The complex impedance of both an annealed and the quenched samples were then measured as a function of temperature from 120o to 250oC. The σdc was found to be remain unaffected by heat treatments below 450oC, to increase rapidly over an approximate 200oC range of temperatures that was dependent on cooling rate and to be constant for heat treatments above this range. This behavior is interpreted in terms of the mean structural relaxation time as a function of temperature and cooling rate near the glass transition temperature and glass transformation ranges. A more detailed definition for the transition and transformation temperatures and ranges was also provided.

  3. Improvement of metallic joint electrical conductivity using a novel conductive paste produced from recycled residues

    Directory of Open Access Journals (Sweden)

    Erivelto Luís de Souza

    2006-06-01

    Full Text Available In industry, the transmission of electricity usually requires high currents transported for very long distances, and in some cases, such as in aluminum plants, the use of high currents is essential for the reduction process. The connections between the electrical furnaces and the transmission cables are made with busbars, which can be comprised of either one or two different types of metal. In this transmission process, the main method to upgrade electrical circuit performance is by improving conductivity at the joint interface. Due to the need to reduce cost and simplify maintenance procedures, the interfaces at the joints are simply brushed, and conductive pastes are pressed between the contacting metals. The material most commonly used is a high-cost graphite paste, which is not produced by any Brazilian company. This paper presents a novel conductive paste, easily elaborated from industrial residues, involving low-cost production, yet presenting better results than those obtained with the graphite paste.A transmissão de eletricidade na indústria usualmente implica altas correntes transportadas por grandes distâncias e, em alguns casos, como em fábricas de alumínio, o uso de altas correntes é essencial no processo de redução. As conexões entre os cabos de transmissão e os fornos elétricos são feitas com barramentos, que podem ser de apenas um tipo de metal, ou de dois diferentes tipos. Nesse processo de transmissão, a principal maneira de aumentar o desempenho do circuito é através da melhoria da condutividade na interface das juntas elétricas. Devido às necessidades de redução de custos e de simplificação dos procedimentos de manutenção, as interfaces nas juntas são apenas escovadas e pastas contutoras são pressionadas entre os metais em contato. O material mais comumente usado é uma pasta condutora de grafite de alto custo, a qual não é produzida por nenhuma companhia brasileira. Esse artigo apresenta uma pasta

  4. Electrical conduction mechanism in ZnS nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Ali, Hassan [Micro and Nano Devices Group, Department of Metallurgy and Materials Engineering, Pakistan Institute of Engineering and Applied Sciences, Nilore 45650, Islamabad (Pakistan); Karim, S. [Nanomaterials Research Group, Physics Division, PINSTECH, Nilore 45650, Islamabad (Pakistan); Rafiq, M.A. [Micro and Nano Devices Group, Department of Metallurgy and Materials Engineering, Pakistan Institute of Engineering and Applied Sciences, Nilore 45650, Islamabad (Pakistan); Maaz, K., E-mail: maaz@impcas.ac.cn [Nanomaterials Research Group, Physics Division, PINSTECH, Nilore 45650, Islamabad (Pakistan); Rahman, Atta ur [Material Laboratory, Department of Physics, Abul Wali Khan University, Mardan, Khyber Pakhtunkhwa (Pakistan); Nisar, A.; Ahmad, M. [Nanomaterials Research Group, Physics Division, PINSTECH, Nilore 45650, Islamabad (Pakistan)

    2014-11-05

    Highlights: • ZnS nanoparticles have been prepared by coprecipitation route with diameter of 20 nm. • The bandgap energy shows small shift as compared to the bulk value of ZnS. • This is explained by weak quantum confinement effects resulted from the quantization of exciton motion. • The photoluminescence spectrum shows two peaks that are assigned to the recombination of electrons and holes. • And to the transitions of electrons from the sulfur to zinc vacancy states. - Abstract: ZnS nanoparticles with hexagonal wurtzite crystal structure have been prepared by coprecipitation method at 70 °C and subsequently annealed at 400 °C for 4 h. The average particle size has been found to be ∼20 nm. ZnS nanopowder has been characterized by UV–Vis spectrophotometry. The band gap has been calculated in the range of 3.9 eV. Impedance spectroscopic technique has been used to examine the electrical properties of ZnS nanoparticles pressed to pellet form in the temperature range of 300–400 K. Correlated barrier hopping has been the prevailing conduction mechanism in ZnS. The activation energy calculated from the Arrhenius relation is consistent with bipolaron and single polaron hopping in correlated barrier hopping model.

  5. Highly Electrically Conducting Glass-Graphene Nanoplatelets Hybrid Coatings.

    Science.gov (United States)

    Garcia, E; Nistal, A; Khalifa, A; Essa, Y; Martín de la Escalera, F; Osendi, M I; Miranzo, P

    2015-08-19

    Hybrid coatings consisting of a heat resistant Y2O3-Al2O3-SiO2 (YAS) glass containing 2.3 wt % of graphene nanoplatelets (GNPs) were developed by flame spraying homogeneous ceramic powders-GNP granules. Around 40% of the GNPs survived the high spraying temperatures and were distributed along the splat-interfaces, forming a percolated network. These YAS-GNP coatings are potentially interesting in thermal protection systems and electromagnetic interference shields for aerospace applications; therefore silicon carbide (SiC) materials at the forefront of those applications were employed as substrates. Whereas the YAS coatings are nonconductive, the YAS-GNP coatings showed in-plane electrical conductivity (∼10(2) S·m(-1)) for which a low percolation limit (below 3.6 vol %) is inferred. Indentation tests revealed the formation of a highly damaged indentation zone showing multiple shear displacements between adjacent splats probably favored by the graphene sheets location. The indentation radial cracks typically found in brittle glass coatings are not detected in the hybrid coatings that are also more compliant.

  6. Electrical conductivity of milk: ability to predict mastitis status.

    Science.gov (United States)

    Norberg, E; Hogeveen, H; Korsgaard, I R; Friggens, N C; Sloth, K H M N; Løvendahl, P

    2004-04-01

    Electrical conductivity (EC) of milk has been introduced as an indicator trait for mastitis over the last decade, and it may be considered as a potential trait in a breeding program where selection for improved udder health is included. In this study, various EC traits were investigated for their association with udder health. In total, 322 cows with 549 lactations were included in the study. Cows were classified as healthy or clinically or subclinically infected, and EC was measured repeatedly during milking on each quarter. Four EC traits were defined; the inter-quarter ratio (IQR) between the highest and lowest quarter EC values, the maximum EC level for a cow, IQR between the highest and lowest quarter EC variation, and the maximum EC variation for a cow. Values for the traits were calculated for every milking throughout the entire lactation. All EC traits increased significantly (P < 0.001) when cows were subclinically or clinically infected. A simple threshold test and discriminant function analysis was used to validate the ability of the EC traits to distinguish between cows in different health groups. Traits reflecting the level rather than variation of EC, and in particular the IQR, performed best to classify cows correctly. By using this trait, 80.6% of clinical and 45.0% of subclinical cases were classified correctly. Of the cows classified as healthy, 74.8% were classified correctly. However, some extra information about udder health status was obtained when a combination of EC traits was used.

  7. Illuminating the electrical conductivity of the lowermost mantle from below

    Science.gov (United States)

    Jault, Dominique

    2015-07-01

    The magnetic field that originates in the earth's core is transformed across the electrically conducting mantle before being observed, at the earth's surface or above. Assuming that the conductivity depends only on radius, it has been customary to treat the mantle as a linear time-invariant filter for the core magnetic field, with properties (as a function of the frequency ω) specified by the transfer function Γ(ω). An high-frequency approximation to Γ(ω), which is derived from a three terms WKBJ expansion with ω-1/2 as small parameter, is found here to reproduce adequately, for low harmonic degrees and/or thin conducting layers, the exact solution, which is evaluated numerically. It is contrasted with the low-frequency estimation of Γ, which consists in a perturbation procedure and in writing Γ(ω) as a series in powers of ω (ω → 0). The low-frequency theory is applied to the magnetic variations produced by the geostrophic core flows with about 6 yr period as the phase of these flows is independently determined from their effect on the length of the day. Apart from that, the low-frequency approximation overestimates the screening by the mantle of high-frequency signals, especially the low harmonic degree ones. In practice, the attenuating factor defined from the O(ω2) term in the expansion of Γ as ω → 0 cannot be retrieved from analyses of geomagnetic time-series. Application of the mantle filter theory hinges on our knowledge about the time spectrum of the magnetic field at the core surface. The low-frequency theory had been previously applied to observatory series on the assumption that geomagnetic jerks occurring in the core are rare and isolated events. Rather than following up these earlier studies, I note that the spectral density function for the second time derivative of the main magnetic field coefficients is approximately independent of ω in a frequency range for which the mantle has undoubtedly negligible influence. In the absence of

  8. DC electrical conductivity, thermoelectric power measurements of TiO{sub 2}-substituted lead vanadate glasses

    Energy Technology Data Exchange (ETDEWEB)

    Ramesh, K.V. [Department of Engineering Physics, GITAM College of Engineering, Gandhinagar Campus, Rushikonda, Visakhapatnam 530 045 (India)]. E-mail: kv_ramesh5@yahoo.co.in; Sastry, D.L. [Department of Physics, Andhra University, Visakhapatnam 530 003 (India)]. E-mail: Sastry_dl@yahoo.co.in

    2007-01-01

    Glasses of the system x(TiO{sub 2})(50-x)PbO:50V{sub 2}O{sub 5} were prepared by melt-quench process in the range x=0-15 mole%. Measurements are reported for DC electrical conductivity as well as thermoelectrical power for the above compositions in the temperature range 27-227 deg. C. The experimental results are analyzed with reference to various theoretical models proposed for DC electrical conduction in amorphous semiconductors. The analysis shows that at high temperatures, the temperature dependence of DC conductivity is consistent with Mott's model of phonon-assisted hopping conduction, variable range hopping mechanism and Schnakenberg's model mechanism. The high-temperature thermoelectric power (TEP) was satisfactorily explained by Heikes' relation and the data also showed evidence of small polaron formation in these glasses. Thermo EMF measurements indicate that all the glass samples including unsubstituted lead metavanadate are n-type at room temperature. As temperature is increased TiO{sub 2}-substituted samples change from n-type to p-type. When Heike's formula is applied to all the systems at room temperature, the amount of disorder was found to be the same in all the systems. When Emin's formula is used for the estimation of W {sub D}, the activation energy due to disorder, in TiO{sub 2}-substituted samples, unusually large values of W {sub D} ({approx}0.6 eV) are obtained. The present results indicate that the Emin's formula cannot be directly used to estimate the disorder energy in TiO{sub 2}-substituted lead vanadates. The temperature-dependent change of sign of the TEP S, in these systems may arise due to change in V{sup 4+}/V{sup 5+} ratio with the change of temperature or due to the onset of band type of conduction as in MnO or other extrinsic compensated semi-conductors.

  9. Gum ghatti based novel electrically conductive biomaterials: A study of conductivity and surface morphology

    Directory of Open Access Journals (Sweden)

    S. Kalia

    2014-04-01

    Full Text Available Gum ghatti-cl-poly(acrylamide-aniline interpenetrating network (IPN was synthesized by a two-step aqueous polymerization method, in which aniline monomer was absorbed into the network of gum ghatti-cl-poly(acrylamide and followed by a polymerization reaction between aniline monomers. Initially, semi-IPN based on acrylamide and gum ghatti was prepared by free-radical copolymerization in aqueous media with optimized process parameters, using N,N'-methylenebis-acrylamide, as cross-linker and ammonium persulfate, as an initiator system. Optimum reaction conditions affording maximum percentage swelling were: solvent [mL] =12, Acrylamide (AAm [mol•L–1] = 1.971, Ammonium peroxydisulfate (APS [mol•L–1] = 0.131•10–1, N,N'-methylene-bis-acrylamide (MBA [mol•L–1] = 0.162•10–1, reaction time [min] = 210, temperature [°C] = 100 and pH = 7.0. The resulting IPN was doped with different protonic acids. The effect of the doping has been investigated on the conductivity and surface morphology of the IPN hydrogel. The maximum conductivity was observed with 1.5N HClO4 concentration. The morphological, structural and electrical properties of the candidate polymers were studied using scanning electron micrscopy (SEM, Fourier transform infrared spectroscopy FTIR and two-probe method, respectively.

  10. Realization of Ag-S codoped p-type ZnO thin films

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Tian Ning, E-mail: xtn9886@zju.edu.cn [Department of Science, Zhijiang College of Zhejiang University of Technology, Hangzhou, Zhejiang 310024 (China); Department of Physics, State Key Laboratory of Silicon Materials, Zhejiang University, Hangzhou, Zhejiang 310027 (China); Li, Xiang; Lu, Zhong [Department of Science, Zhijiang College of Zhejiang University of Technology, Hangzhou, Zhejiang 310024 (China); Chen, Yong Yue [Department of Physics, State Key Laboratory of Silicon Materials, Zhejiang University, Hangzhou, Zhejiang 310027 (China); Sui, Cheng Hua [Department of Science, Zhijiang College of Zhejiang University of Technology, Hangzhou, Zhejiang 310024 (China); Wu, Hui Zhen [Department of Physics, State Key Laboratory of Silicon Materials, Zhejiang University, Hangzhou, Zhejiang 310027 (China)

    2014-10-15

    Highlights: • Ag-S codoped p-type ZnO thin films have been fabricated. • The films exhibit low resistivity and high Hall mobility and hole concentration. • A ZnO:(Ag, S)/i-ZnO/ZnO:Al homojunction has been fabricated and shows rectifying behaviors. - Abstract: Ag-S codoped ZnO films have been grown on quartz substrates by e-beam evaporation at low temperature (100 °C). The effects of Ag{sub 2}S content on the structural and electrical properties of the films were investigated. The results showed that 2 wt% Ag{sub 2}S doped films exhibited p-type conduction, with a resistivity of 0.0347 Ω cm, a Hall mobility of 9.53 cm{sup 2} V{sup −1} s{sup −1}, and a hole concentration of 1.89 × 10{sup 19} cm{sup −3} at room temperature. The X-ray photoelectron spectroscopy measurements showed that Ag and S have been incorporated into the films. To further confirm the p-type conduction of Ag-S codoped ZnO films, a ZnO:(Ag, S)/i-ZnO/ZnO:Al homojunction was fabricated and rectifying behaviors of which was measured. High electrical performance and low growth temperature indicate that Ag{sub 2}S is a promising dopant to fabricate p-type Ag-S codoped ZnO films.

  11. 76 FR 70122 - Plan for Conduct of 2012 Electric Transmission Congestion Study

    Science.gov (United States)

    2011-11-10

    ... Regional Entity (TRE), and the Western Electricity Coordinating Council. In preparing the 2009 Congestion... additions. These sources may include, but are not limited to: ] Electricity market analyses, including... for Conduct of 2012 Electric Transmission Congestion Study AGENCY: Office of Electricity Delivery...

  12. Microstructural inhomogeneity of electrical conductivity in subcutaneous fat tissue.

    Directory of Open Access Journals (Sweden)

    Ilja L Kruglikov

    Full Text Available Microscopic peculiarities stemming from a temperature increase in subcutaneous adipose tissue (sWAT after applying a radio-frequency (RF current, must be strongly dependent on the type of sWAT. This effect is connected with different electrical conductivities of pathways inside (triglycerides in adipocytes and outside (extra-cellular matrix the cells and to the different weighting of these pathways in hypertrophic and hyperplastic types of sWAT. The application of the RF current to hypertrophic sWAT, which normally has a strongly developed extracellular matrix with high concentrations of hyaluronan and collagen in a peri-cellular space of adipocytes, can produce, micro-structurally, a highly inhomogeneous temperature distribution, characterized by strong temperature gradients between the peri-cellular sheath of the extra-cellular matrix around the hypertrophic adipocytes and their volumes. In addition to normal temperature effects, which are generally considered in body contouring, these temperature gradients can produce thermo-mechanical stresses on the cells' surfaces. Whereas these stresses are relatively small under normal conditions and cannot cause any direct fracturing or damage of the cell structure, these stresses can, under some supportive conditions, be theoretically increased by several orders of magnitude, causing the thermo-mechanical cell damage. This effect cannot be realized in sWAT of normal or hyperplastic types where the peri-cellular structures are under-developed. It is concluded that the results of RF application in body contouring procedures must be strongly dependent on the morphological structure of sWAT.

  13. Transcardiac conducted electrical weapon (TASER) probe deployments: incidence and outcomes.

    Science.gov (United States)

    Bozeman, William P; Teacher, Eric; Winslow, James E

    2012-12-01

    TASER (TASER International, Scottsdale, AZ) conducted electrical weapons (CEWs) are commonly used by law enforcement officers. Although animal studies have suggested that transcardiac CEW discharges may produce direct cardiac effects, this has not been demonstrated in human studies. This study sought to determine the incidence and outcomes of transcardiac CEW probe impact locations in a large series of actual CEW deployments. A multi-center database of consecutive CEW uses by law enforcement officers was retrospectively reviewed. Case report forms were independently reviewed by three investigators to identify cases with paired probe configurations potentially producing a transcardiac discharge vector. Descriptive analysis was performed and inter-rater reliability was assessed. Among 1201 total CEW uses, 813 included probe deployments and 178 cases had paired anterior probe impacts potentially capable of producing a transcardiac discharge vector. This represents 14.8% of all CEW uses (95% confidence interval [CI] 12.9-16.9%) and 21.9% of CEW uses in probe mode (95% CI 19.1-24.9%). Inter-rater agreement was very good, with kappa = 0.82. There were no immediate deaths in any cases (97.5% CI 0.0-0.3%) to suggest a cardiac dysrhythmia, including those with transcardiac discharge vector. CEW deployments with probe impact configurations capable of producing a transcardiac discharge occur in a minority of cases in field use conditions. None of these cases, transcardiac or otherwise, produced immediately fatal dysrhythmias. These data support the overall safety of CEWs and provide a benchmark estimate of the likelihood of transcardiac discharge vectors occurring in field use of CEWs. Copyright © 2012 Elsevier Inc. All rights reserved.

  14. Microstructural inhomogeneity of electrical conductivity in subcutaneous fat tissue.

    Science.gov (United States)

    Kruglikov, Ilja L

    2015-01-01

    Microscopic peculiarities stemming from a temperature increase in subcutaneous adipose tissue (sWAT) after applying a radio-frequency (RF) current, must be strongly dependent on the type of sWAT. This effect is connected with different electrical conductivities of pathways inside (triglycerides in adipocytes) and outside (extra-cellular matrix) the cells and to the different weighting of these pathways in hypertrophic and hyperplastic types of sWAT. The application of the RF current to hypertrophic sWAT, which normally has a strongly developed extracellular matrix with high concentrations of hyaluronan and collagen in a peri-cellular space of adipocytes, can produce, micro-structurally, a highly inhomogeneous temperature distribution, characterized by strong temperature gradients between the peri-cellular sheath of the extra-cellular matrix around the hypertrophic adipocytes and their volumes. In addition to normal temperature effects, which are generally considered in body contouring, these temperature gradients can produce thermo-mechanical stresses on the cells' surfaces. Whereas these stresses are relatively small under normal conditions and cannot cause any direct fracturing or damage of the cell structure, these stresses can, under some supportive conditions, be theoretically increased by several orders of magnitude, causing the thermo-mechanical cell damage. This effect cannot be realized in sWAT of normal or hyperplastic types where the peri-cellular structures are under-developed. It is concluded that the results of RF application in body contouring procedures must be strongly dependent on the morphological structure of sWAT.

  15. Application of Electromagnetic Induction to Monitor Changes in Soil Electrical Conductivity Profiles in Arid Agriculture

    KAUST Repository

    Jadoon, K.Z.

    2015-09-06

    In this research, multi-configuration electromagnetic induction (EMI) measurements were conducted in a corn field to estimate variation in soil electrical conductivity profiles in the roots zone. Electromagnetic forward model based on the full solution of Maxwell\\'s equation was used to simulate the apparent electrical conductivity measured with EMI system (the CMD mini-Explorer). Joint inversion of multi-configuration EMI measurements were performed to estimate the vertical soil electrical conductivity profiles. The inversion minimizes the misfit between the measured and modeled soil apparent electrical conductivity by DiffeRential Evolution Adaptive Metropolis (DREAM) algorithm, which is based on Bayesain approach. Results indicate that soil electrical conductivity profiles have low values close to the corn plants, which indicates loss of soil moisture due to the root water uptake. These results offer valuable insights into future potential and emerging challenges in the development of joint analysis of multi-configuration EMI measurements to retrieve effective soil electrical conductivity profiles.

  16. Modeling geomagnetic induction hazards using a 3-D electrical conductivity model of Australia

    Science.gov (United States)

    Wang, Liejun; Lewis, Andrew M.; Ogawa, Yasuo; Jones, William V.; Costelloe, Marina T.

    2016-12-01

    The surface electric field induced by external geomagnetic source fields is modeled for a continental-scale 3-D electrical conductivity model of Australia at periods of a few minutes to a few hours. The amplitude and orientation of the induced electric field at periods of 360 s and 1800 s are presented and compared to those derived from a simplified ocean-continent (OC) electrical conductivity model. It is found that the induced electric field in the Australian region is distorted by the heterogeneous continental electrical conductivity structures and surrounding oceans. On the northern coastlines, the induced electric field is decreased relative to the simple OC model due to a reduced conductivity contrast between the seas and the enhanced conductivity structures inland. In central Australia, the induced electric field is less distorted with respect to the OC model as the location is remote from the oceans, but inland crustal high-conductivity anomalies are the major source of distortion of the induced electric field. In the west of the continent, the lower conductivity of the Western Australia Craton increases the conductivity contrast between the deeper oceans and land and significantly enhances the induced electric field. Generally, the induced electric field in southern Australia, south of latitude -20°, is higher compared to northern Australia. This paper provides a regional indicator of geomagnetic induction hazards across Australia.

  17. Materials and methods for autonomous restoration of electrical conductivity

    Science.gov (United States)

    Blaiszik, Benjamin J; Odom, Susan A; Caruso, Mary M; Jackson, Aaron C; Baginska, Marta B; Ritchey, Joshua A; Finke, Aaron D; White, Scott R; Moore, Jeffrey S; Sottos, Nancy R; Braun, Paul V; Amine, Khalil

    2014-03-25

    An autonomic conductivity restoration system includes a solid conductor and a plurality of particles. The particles include a conductive fluid, a plurality of conductive microparticles, and/or a conductive material forming agent. The solid conductor has a first end, a second end, and a first conductivity between the first and second ends. When a crack forms between the first and second ends of the conductor, the contents of at least a portion of the particles are released into the crack. The cracked conductor and the released contents of the particles form a restored conductor having a second conductivity, which may be at least 90% of the first conductivity.

  18. Phase Diagrams of Electric-Fduced Aggregation in Conducting Colloids

    Science.gov (United States)

    Khusid, B.; Acrivos, A.

    1999-01-01

    Under the application of a sufficiently strong electric field, a suspension may undergo reversible phase transitions from a homogeneous random arrangement of particles into a variety of ordered aggregation patterns. The surprising fact about electric-field driven phase transitions is that the aggregation patterns, that are observed in very diverse systems of colloids, display a number of common structural features and modes of evolution thereby implying that a universal mechanism may exist to account for these phenomena. It is now generally believed that this mechanism emanates from the presence of the long-range anisotropic interactions between colloidal particles due to their polarization in an applied field. But, in spite of numerous applications of the electric-field-driven phenomena in biotechnology, separation, materials engineering, chemical analysis, etc. our understanding of these phenomena is far from complete. Thus, it is the purpose of the proposed research to develop a theory and then test experimentally, under normal- and low-gravity conditions, the accuracy of the theoretical predictions regarding the effect of the synergism of the interparticle electric and hydrodynamic interactions on the phase diagram of a suspension. The main results from our theoretical studies performed to-date enable one to trace how the variations of the electrical properties of the constituent materials influence the topology of the suspension phase diagram and then, by using an appropriate phase diagram, to evaluate how the electric-field-induced transformations will depend on the frequency and the strength of the applied field.

  19. Ultrahigh Oxidation Resistance and High Electrical Conductivity in Copper-Silver Powder

    Science.gov (United States)

    Li, Jiaxiang; Li, Yunping; Wang, Zhongchang; Bian, Huakang; Hou, Yuhang; Wang, Fenglin; Xu, Guofu; Liu, Bin; Liu, Yong

    2016-12-01

    The electrical conductivity of pure Cu powder is typically deteriorated at elevated temperatures due to the oxidation by forming non-conducting oxides on surface, while enhancing oxidation resistance via alloying is often accompanied by a drastic decline of electrical conductivity. Obtaining Cu powder with both a high electrical conductivity and a high oxidation resistance represents one of the key challenges in developing next-generation electrical transferring powder. Here, we fabricate a Cu-Ag powder with a continuous Ag network along grain boundaries of Cu particles and demonstrate that this new structure can inhibit the preferential oxidation in grain boundaries at elevated temperatures. As a result, the Cu-Ag powder displays considerably high electrical conductivity and high oxidation resistance up to approximately 300 °C, which are markedly higher than that of pure Cu powder. This study paves a new pathway for developing novel Cu powders with much enhanced electrical conductivity and oxidation resistance in service.

  20. Influence of deformation and heat treatment on electrical conductivity of CuMoCr alloy

    Institute of Scientific and Technical Information of China (English)

    XIONG Xue-hui; LIU Lin; YUE Xue-qing; LIU Jian-hua; ZHANG Rui-jun

    2009-01-01

    The solution heat treatment, cold deformation and subsequent aging were performed on CuMoCr al-loy. And the influence of deformation and aging treatment on the electrical conductivity of CuMoCr alloy was studied through metallograph, transmission electron microscopy (TEM) and electrical conductivity measure-ment. Results show that deformation without subsequent aging can reduce the electrical conductivity of CuMoCr alloy, but deformation followed by the optimum aging treatment can effectively improve the electrical conductivi-ty of CuMoCr alloy. Aging at 500℃ for 4 h after 80% deformation, the much better electrical conductivity of CuMoCr alloy can be obtained. Reduction of Cr content in the Cu matrix could be the reason for the enhance-ment of electrical conductivity.

  1. Electrically conductive nanostructured silver doped zinc oxide (Ag:ZnO) prepared by solution-immersion technique

    Science.gov (United States)

    Afaah, A. N.; Asib, N. A. M.; Aadila, A.; Mohamed, R.; Rusop, M.; Khusaimi, Z.

    2016-07-01

    p-type ZnO films have been fabricated on ZnO-seeded glass substrate, using AgNO3 as a source of silver dopant by facile solution-immersion. Cleaned glass substrate were seeded with ZnO by mist-atomisation, and next the seeded substrates were immersed in Ag:ZnO solution. The effects of Ag doping concentration on the Ag-doped ZnO have been investigated. The substrates were immersed in different concentrations of Ag dopant with variation of 0, 1, 3, 5 and 7 at. %. The surface morphology of the films was characterized by field emission scanning electron microscope (FESEM). In order to investigate the electrical properties, the films were characterized by Current-Voltage (I-V) measurement. FESEM micrographs showed uniform distribution of nanostructured ZnO and Ag:ZnO. Besides, the electrical properties of Ag-doped ZnO were also dependent on the doping concentration. The I-V measurement result indicated the electrical properties of 1 at. % Ag:ZnO thin film owned highest electrical conductivity.

  2. Sputtering deposition of P-type SnO films with SnO₂ target in hydrogen-containing atmosphere.

    Science.gov (United States)

    Hsu, Po-Ching; Hsu, Chao-Jui; Chang, Ching-Hsiang; Tsai, Shiao-Po; Chen, Wei-Chung; Hsieh, Hsing-Hung; Wu, Chung-Chih

    2014-08-27

    In this work, we had investigated sputtering deposition of p-type SnO using the widely used and robust SnO2 target in a hydrogen-containing reducing atmosphere. The effects of the hydrogen-containing sputtering gas on structures, compositions, optical, and electrical properties of deposited SnOx films were studied. Results show that polycrystalline and SnO-dominant films could be readily obtained by carefully controlling the hydrogen gas ratio in the sputtering gas and the extent of reduction reaction. P-type conductivity was unambiguously observed for SnO-dominant films with traceable Sn components, exhibiting a p-type Hall mobility of up to ∼3 cm(2) V(-1) s(-1). P-type SnO thin-film transistors using such SnO-dominant films were also demonstrated.

  3. Electrical conductivity improvement of aeronautical carbon fiber reinforced polyepoxy composites by insertion of carbon nanotubes

    OpenAIRE

    Lonjon, Antoine; Demont, Philippe; Dantras, Eric; Lacabanne, Colette

    2012-01-01

    International audience; An increase and homogenization of electrical conductivity is essential in epoxy carbon fiber laminar aeronautical composites. Dynamic conductivity measurements have shown a very poor transversal conductivity. Double wall carbon nanotubes have been introduced into the epoxy matrix to increase the electrical conductivity. The conductivity and the degree of dispersion of carbon nanotubes in epoxy matrix were evaluated. The epoxy matrix was filled with 0.4 wt.% of CNTs to ...

  4. Mechanism of electrical conductivity in an irradiated polyimide

    Science.gov (United States)

    Ries, H. R.; Harries, W. L.; Long, S. A. T.; Long, E. R., Jr.

    1989-01-01

    A polyimide was exposed to 1.0 MeV electron radiation. The radiation-induced radical density and dc conductivity were measured at various post-irradiation times. The radiation-induced radical density was found to be correlated to the increased dc conductivity through a hopping model of conductivity. The post-irradiation radical species were identified.

  5. Investigation on the Electrical Conductivity of Transformer Oil-Based AlN Nanofluid

    Directory of Open Access Journals (Sweden)

    M. Dong

    2013-01-01

    Full Text Available Aluminum-nitride-(AlN-transformer oil-based nanofluid was prepared by dispersing AlN nanoparticles in transformer oil. The composition-dependent electrical conductivity of AlN-transformer oil nanofluid was investigated at different ambient temperatures. The results indicate the nonlinear dependences of the electrical conductivity on volumetric fraction and temperature. In comparison to the pure transformer oil, the electrical conductivity of nanofluid containing 0.5% AlN nanoparticles has increased by 1057 times at 60°C. By considering the electrophoresis of the AlN nanoparticles, a straightforward electrical conductivity model is established to modulate and understand the experiment results.

  6. Study of electrical conductivity response upon formation of ice and gas hydrates from salt solutions by a second generation high pressure electrical conductivity probe.

    Science.gov (United States)

    Sowa, Barbara; Zhang, Xue Hua; Kozielski, Karen A; Dunstan, Dave E; Hartley, Patrick G; Maeda, Nobuo

    2014-11-01

    We recently reported the development of a high pressure electrical conductivity probe (HP-ECP) for experimental studies of formation of gas hydrates from electrolytes. The onset of the formation of methane-propane mixed gas hydrate from salt solutions was marked by a temporary upward spike in the electrical conductivity. To further understand hydrate formation a second generation of window-less HP-ECP (MkII), which has a much smaller heat capacity than the earlier version and allows access to faster cooling rates, has been constructed. Using the HP-ECP (MkII) the electrical conductivity signal responses of NaCl solutions upon the formation of ice, tetrahydrofuran hydrates, and methane-propane mixed gas hydrate has been measured. The concentration range of the NaCl solutions was from 1 mM to 3M and the driving AC frequency range was from 25 Hz to 5 kHz. This data has been used to construct an "electrical conductivity response phase diagrams" that summarize the electrical conductivity response signal upon solid formation in these systems. The general trend is that gas hydrate formation is marked by an upward spike in the conductivity at high concentrations and by a drop at low concentrations. This work shows that HP-ECP can be applied in automated measurements of hydrate formation probability distributions of optically opaque samples using the conductivity response signals as a trigger.

  7. Bentonite electrical conductivity: a model based on series–parallel transport

    KAUST Repository

    Lima, Ana T.

    2010-01-30

    Bentonite has significant applications nowadays, among them as landfill liners, in concrete industry as a repairing material, and as drilling mud in oil well construction. The application of an electric field to such perimeters is under wide discussion, and subject of many studies. However, to understand the behaviour of such an expansive and plastic material under the influence of an electric field, the perception of its electrical properties is essential. This work serves to compare existing data of such electrical behaviour with new laboratorial results. Electrical conductivity is a pertinent parameter since it indicates how much a material is prone to conduct electricity. In the current study, total conductivity of a compacted porous medium was established to be dependent upon density of the bentonite plug. Therefore, surface conductivity was addressed and a series-parallel transport model used to quantify/predict the total conductivity of the system. © The Author(s) 2010.

  8. Evaluation of DC electric field distribution of PPLP specimen based on the measurement of electrical conductivity in LN2

    Science.gov (United States)

    Hwang, Jae-Sang; Seong, Jae-Kyu; Shin, Woo-Ju; Lee, Jong-Geon; Cho, Jeon-Wook; Ryoo, Hee-Suk; Lee, Bang-Wook

    2013-11-01

    High temperature superconducting (HTS) cable has been paid much attention due to its high efficiency and high current transportation capability, and it is also regarded as eco-friendly power cable for the next generation. Especially for DC HTS cable, it has more sustainable and stable properties compared to AC HTS cable due to the absence of AC loss in DC HTS cable. Recently, DC HTS cable has been investigated competitively all over the world, and one of the key components of DC HTS cable to be developed is a cable joint box considering HVDC environment. In order to achieve the optimum insulation design of the joint box, analysis of DC electric field distribution of the joint box is a fundamental process to develop DC HTS cable. Generally, AC electric field distribution depends on relative permittivity of dielectric materials but in case of DC, electrical conductivity of dielectric material is a dominant factor which determines electric field distribution. In this study, in order to evaluate DC electric field characteristics of the joint box for DC HTS cable, polypropylene laminated paper (PPLP) specimen has been prepared and its DC electric field distribution was analyzed based on the measurement of electrical conductivity of PPLP in liquid nitrogen (LN2). Electrical conductivity of PPLP in LN2 has not been reported yet but it should be measured for DC electric field analysis. The experimental works for measuring electrical conductivity of PPLP in LN2 were presented in this paper. Based on the experimental works, DC electric field distribution of PPLP specimen was fully analyzed considering the steady state and the transient state of DC. Consequently, it was possible to determine the electric field distribution characteristics considering different DC applying stages including DC switching on, DC switching off and polarity reversal conditions.

  9. Electrically Conductive, Hydrophilic Porous Membrane for Fuel Cell Applications Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This Phase I effort seeks to produce a conductive polyethersulfone (PES) microporous membrane for fuel cell water management applications. This membrane will...

  10. Extraction of temperature dependent electrical resistivity and thermal conductivity from silicon microwires self-heated to melting temperature

    Science.gov (United States)

    Bakan, Gokhan; Adnane, Lhacene; Gokirmak, Ali; Silva, Helena

    2012-09-01

    Temperature-dependent electrical resistivity, ρ(T), and thermal conductivity, k(T), of nanocrystalline silicon microwires self-heated to melt are extracted by matching simulated current-voltage (I-V) characteristics to experimental I-V characteristics. Electrical resistivity is extracted from highly doped p-type wires on silicon dioxide in which the heat losses are predominantly to the substrate and the self-heating depends mainly on ρ(T) of the wires. The extracted ρ(T) decreases from 11.8 mΩ cm at room-temperature to 5.2 mΩ cm at 1690 K, in reasonable agreement with the values measured up to ˜650 K. Electrical resistivity and thermal conductivity are extracted from suspended highly doped n-type silicon wires in which the heat losses are predominantly through the wires. In this case, measured ρ(T) (decreasing from 20.5 mΩ cm at room temperature to 12 mΩ cm at 620 K) is used to extract ρ(T) at higher temperatures (decreasing to 1 mΩ cm at 1690 K) and k(T) (decreasing from 30 W m-1 K-1 at room temperature to 20 W m-1 K-1 at 1690 K). The method is tested by using the extracted parameters to model wires with different dimensions. The experimental and simulated I-V curves for these wires show good agreement up to high voltage and temperature levels. This technique allows extraction of the electrical resistivity and thermal conductivity up to very high temperatures from self-heated microstructures.

  11. In vivo human-skin electrical conduction and pain sensations

    Energy Technology Data Exchange (ETDEWEB)

    Voegelin, M. R. [Florence, Univ. (Italy). Div. di Fisica Medica. Dipt. di Fisiopatologia; Paoli, G.; Zoppi, M. [Florence, Univ. (Italy). Istituto della I Clinica Medica

    1997-06-01

    In vivo human skin is stimulated by direct current the intensity of which ranges from 1 {mu}A to 1 mA. They have detected the voltage/current plot and the temporal trend of potential difference between two electrodes placed in a suitable cutaneous region of stimulation, in a group of healthy subjects. They have elaborated a non-linear functional equivalent model to describe the system behaviour. The electrical stimulation can induce painful sensation, over a critical value of the current intensity, and they believe that this sensation is due to thermal dissipation into the inner layers of the skin. In fact, subjects begin to feel pain when the electric power dissipated in the stimulated region for unit time is within the range of 235-260 mcal/cm{sup 2}{center_dot}s, that corresponds to the thermal threshold required to evoke pain.

  12. Preparation of Electrically Conductive Polystyrene/Carbon Nanofiber Nanocomposite Films

    Science.gov (United States)

    Sun, Luyi; O'Reilly, Jonathan Y.; Tien, Chi-Wei; Sue, Hung-Jue

    2008-01-01

    A simple and effective approach to prepare conductive polystyrene/carbon nanofiber (PS/CNF) nanocomposite films via a solution dispersion method is presented. Inexpensive CNF, which has a structure similar to multi-walled carbon nanotubes, is chosen as a nanofiller in this experiment to achieve conductivity in PS films. A good dispersion is…

  13. Sublinear dispersive conductivity in polyetherimides by the electric modulus formalism

    OpenAIRE

    Mudarra López, Miguel; Sellarès González, Jordi; Cañadas Lorenzo, Juan Carlos; Diego Vives, José Antonio

    2013-01-01

    (c) 2015 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other users, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works for resale or redistribution to servers or lists, or reuse of any copyrighted components of this work in other works. Two commercially available polyetherimides, Ultem 1000 and Ultem 5000, have been studied by means of Dynamic Electrical Analysis. Result...

  14. Self-resonant Coil for Contactless Electrical Conductivity Measurement under Pulsed Ultra-high Magnetic Fields

    CERN Document Server

    Nakamura, Daisuke; Takeyama, Shojiro

    2014-01-01

    In this study, we develop experimental apparatus for contactless electrical conductivity measurements under pulsed high magnetic fields over 100 T using a self-resonant-type high-frequency circuit. The resonant power spectra were numerically analyzed, and the conducted simulations showed that the apparatus is optimal for electrical conductivity measurements of materials with high electrical conductivity. The newly developed instruments were applied to a high-temperature cuprate superconductor La$_{2-x}$Sr$_x$CuO$_4$ to show conductivity changes in magnetic fields up to 102 T with a good signal-to-noise ratio. The upper critical field was determined with high accuracy.

  15. Thermal switching of the electrical conductivity of Si(111)([Formula

    DEFF Research Database (Denmark)

    Wells, J W; Kallehauge, Jesper; Hofmann, Ph

    2007-01-01

    The temperature-dependent surface conductivity of the Si(111)([Formula: see text])Ag surface was measured using a microscopic four-point probe. The conductivity was found to undergo a sharp increase of about three orders of magnitude when the system was heated above about 220 K. This strong...... conductivity change is reversible and attributed to the phase transition which is generally believed to occur on this surface. It is also shown that, in order to find the true surface conductivity, it is necessary to separate it from the contribution of the bulk and space charge layer. In this work......, this is achieved by using a finite-element model. A percolating network of Ag islands on Si(111) was also studied and a much simpler behaviour (compared to that of Si(111)([Formula: see text])Ag) was found. The temperature-dependent conductivity of this system was found to display typical metallic behaviour...

  16. Electrical conductivity measurements of aqueous and immobilized potassium hydroxide

    DEFF Research Database (Denmark)

    Allebrod, Frank; Chatzichristodoulou, Christodoulos; Mollerup, Pia Lolk

    2012-01-01

    -porous solid pellets were produced and used to immobilize aqueous KOH solutions. These are intended to operate as ion-conductive diaphragms (electrolytes) in alkaline electrolysis cells, offering high conductivity and corrosion resistance. The conductivity of immobilized KOH has been determined by the same......It is important to know the conductivity of the electrolyte of an alkaline electrolysis cell at a given temperature and concentration so as to reduce the ohmic loss during electrolysis through optimal cell and system design. The conductivity of aqueous KOH at elevated temperatures and high...... + gaseous phase fields of the KOH/H2O system were calculated as a function of temperature, concentration and pressure in the temperature range of 100–350 °C, for concentrations of 0–60 wt% and at pressures between 1 and 100 bar....

  17. Influence of dehydration on the electrical conductivity of epidote and implications for high-conductivity anomalies in subduction zones

    Science.gov (United States)

    Hu, Haiying; Dai, Lidong; Li, Heping; Hui, Keshi; Sun, Wenqing

    2017-04-01

    The anomalously high electrical conductivities ( 0.1 to 1 S/m) in deep mantle wedge regions extensively detected by magnetotelluric studies are often associated with the presence of fluids released from the progressive dehydration of subducting slabs. Epidote minerals are the Ca-Al-rich hydrous silicates with huge stability fields exceeding those of amphibole (>70-80 km) in subducting oceanic crust, and they may therefore be transported to greater depth than amphibole and release water to the mantle wedge. In this study, the electrical conductivities of epidote were measured at 0.5-1.5 GPa and 573-1273 K by using a Solartron-1260 Impedance/Gain-Phase Analyzer in a YJ-3000t multianvil pressure within the frequency range of 0.1-106 Hz. The results demonstrate that the influence of pressure on electrical conductivity of epidote is relatively small compared to that of temperature. The dehydration reaction of epidote is observed through the variation of electrical conductivity around 1073 K, and electrical conductivity reaches up to 1 S/m at 1273 K, which can be attributed to aqueous fluid released from epidote dehydration. After sample dehydration, electrical conductivity noticeably decreases by as much as nearly a log unit compared with that before dehydration, presumably due to a combination of the presence of coexisting mineral phases and aqueous fluid derived from the residual epidote. Taking into account the petrological and geothermal structures of subduction zones, it is suggested that the aqueous fluid produced by epidote dehydration could be responsible for the anomalously high conductivities in deep mantle wedges at depths of 70-120 km, particularly in hot subduction zones.

  18. Numerical Modelling of Electric Conductance of a thin Sheet

    Directory of Open Access Journals (Sweden)

    Mojmir Kollar

    2006-01-01

    Full Text Available In this paper the numeric modelling of total resistance of a thin sheet, with local conductivity in randomlydistributed grains higher then is that of the basic matrix, is presented. The 2D model is formed by a structure of longitudinaland transversal conductors interconnected in nodes of a square net. In all nodes, using iteration procedure, the potential isdetermined from which the conductance of sheet is computed between two touching electrodes. The described model can beused to imitate the behaviour of heterogeneous thin conducting sheets prepared by different techniques. The model wasverified in some cases where the net resistance is well known from the theory.

  19. Electrical conductivity of molten SnCl{sub 2} at temperature as high as 1314 K

    Energy Technology Data Exchange (ETDEWEB)

    Salyulev, Alexander B.; Potapov, Alexei M. [Ural Branch of RAS, Ekaterinburg (Russian Federation). Inst. of High-Temperature Electrochemistry

    2015-07-01

    The electrical conductivity of molten SnCl{sub 2} was measured in a wide temperature range (ΔT=763 K), from 551 K to temperature as high as 1314 K, that is, 391 above the boiling point of the salt. The specific electrical conductance was found to reach its maximum at 1143 K, after that it decreases with the temperature rising.

  20. Electrical Conductivity Of Diamond Up To 1,200 Degrees C

    Science.gov (United States)

    Vandersande, Jan W.; Zoltan, Leslie D.

    1993-01-01

    Report discusses measurements of electrical conductivities of two synthetic diamond films, three synthetic diamondlike films, and two natural type IIa diamonds at temperatures from ambient to 1,200 degrees C. Measurements performed to compare electrical conductivities of state-of-the-art diamond films with those of natural insulating diamond, particularly at temperatures above 700 degrees C.

  1. The electrical conductivity of jet fuels F–34 and F–35 (JET A–1 in distribution

    Directory of Open Access Journals (Sweden)

    Białecki Tomasz

    2015-12-01

    Full Text Available The paper presents a changeability of electrical conductivity of jet fuels in distribution. Author described the methods used to prevent the formation of the dangers of static electricity. Research was carried out on two basic fuels used worldwide to power engines in civil (Jet A – 1 and military aircrafts (F – 34, during real fuel supplies in aviation military unit. Results of influence of temperature on the electrical conductivity of jet fuel are presented.

  2. The influence of AlN interlayers on the microstructural and electrical properties of p-type AlGaN/GaN superlattices grown on GaN/sapphire templates

    Energy Technology Data Exchange (ETDEWEB)

    Li, Lei; Liu, Lei; Wang, Lei; Li, Ding; Song, Jie; Liu, Ningyang; Chen, Weihua; Wang, Yuzhou; Yang, Zhijian; Hu, Xiaodong [Peking University, State Key Laboratory for Artificial Microstructure and Mesoscopic Physics, School of Physics, Beijing (China)

    2012-09-15

    AlN with different thicknesses were grown as interlayers (ILs) between GaN and p-type Al{sub 0.15}Ga{sub 0.85}N/GaN superlattices (SLs) by metal organic vapor phase epitaxy (MOVPE). It was found that the edge-type threading dislocation density (TDD) increased gradually from the minimum of 2.5 x 10{sup 9} cm{sup -2} without AlN IL to the maximum of 1 x 10{sup 10} cm{sup -2} at an AlN thickness of 20 nm, while the screw-type TDD remained almost unchanged due to the interface-related TD suppression and regeneration mechanism. We obtained that the edge-type dislocations acted as acceptors in p-type Al{sub x} Ga{sub 1-x} N/GaN SLs, through the comparison of the edge-type TDD and hole concentration with different thicknesses of AlN IL. The Mg activation energy was significantly decreased from 153 to 70 meV with a 10-nm AlN IL, which was attributed to the strain modulation between AlGaN barrier and GaN well. The large activation efficiency, together with the TDs, led to the enhanced hole concentration. The variation trend of Hall mobility was also observed, which originated from the scattering at TDs. (orig.)

  3. Effects of a radially varying electrical conductivity on 3D numerical dynamos

    CERN Document Server

    Gomez-Perez, Natalia; Wicht, Johannes; 10.1016/j.pepi.2010.03.006

    2010-01-01

    The transition from liquid metal to silicate rock in the cores of the terrestrial planets is likely to be accompanied by a gradient in the composition of the outer core liquid. The electrical conductivity of a volatile enriched liquid alloy can be substantially lower than a light-element-depleted fluid found close to the inner core boundary. In this paper, we investigate the effect of radially variable electrical conductivity on planetary dynamo action using an electrical conductivity that decreases exponentially as a function of radius. We find that numerical solutions with continuous, radially outward decreasing electrical conductivity profiles result in strongly modified flow and magnetic field dynamics, compared to solutions with homogeneous electrical conductivity. The force balances at the top of the simulated fluid determine the overall character of the flow. The relationship between Coriolis and Lorentz forces near the outer boundary controls the flow and magnetic field intensity and morphology of the...

  4. Electrical conduction of LiF interlayers in organic diodes

    Energy Technology Data Exchange (ETDEWEB)

    Bory, Benjamin F.; Janssen, René A. J.; Meskers, Stefan C. J., E-mail: s.c.j.meskers@tue.nl [Molecular Materials and Nanosystems and Institute for Complex Molecular Systems, Eindhoven University of Technology, P.O. Box 513, 5600 MB Eindhoven (Netherlands); Gomes, Henrique L. [Instituto de Telecomunicações, Av. Rovisco, Pais, 1, 1049–001, Lisboa, Portugal and Universidade do Algarve, Campus de Gambelas, 8005-139 Faro (Portugal); Leeuw, Dago M. de [Max-Planck Institute for Polymer Research, Ackermannweg 10, 55128 Mainz, Germany and King Abdulaziz University, Jeddah (Saudi Arabia)

    2015-04-21

    An interlayer of LiF in between a metal and an organic semiconductor is commonly used to improve the electron injection. Here, we investigate the effect of moderate bias voltages on the electrical properties of Al/LiF/poly(spirofluorene)/Ba/Al diodes by systematically varying the thickness of the LiF layer (2-50 nm). Application of forward bias V below the bandgap of LiF (V < E{sub g} ∼ 14 V) results in reversible formation of an electrical double layer at the LiF/poly(spirofluorene) hetero-junction. Electrons are trapped on the poly(spirofluorene) side of the junction, while positively charged defects accumulate in the LiF with number densities as high as 10{sup 25}/m{sup 3}. Optoelectronic measurements confirm the built-up of aggregated, ionized F centres in the LiF as the positive trapped charges. The charged defects result in efficient transport of electrons from the polymer across the LiF, with current densities that are practically independent of the thickness of the LiF layer.

  5. Electrical conductivity and Equation of State from Measurements of a Tamped Electrically Exploded Foil

    Science.gov (United States)

    Ruden, Edward; Amdahl, David; Cooksey, Rufus; Domonkos, Matthew; Robinson, Paul; Analla, Francis; Brown, Darwin; Kostora, Mark; Camacho, Frank

    2013-10-01

    Results are presented for an experiment that produces and diagnoses dynamic surface conditions of homogeneous warm dense matter (WDM) to infer intrinsic bulk properties such as density, pressure, temperature, specific energy, electrical conductivity, and emissivity in the ranges of up to few eV and down to 0.1 solid density-typical of those encountered in single shot pulsed power device electrodes. The goal is to validate ab initio models of matter encountered for predictive modeling of such devices. In the test whose results are presented here, the WDM is produced by Ohmically heating and exploding an 80 μm Al foil placed between two fused quartz tampers by the discharge of a 36 μF capacitor bank charged to 30.1 kV and discharged in 2.55 μs to a peak load current of 460 kA. Measurements are presented from two division of amplitude polarimeters which operate at 532 nm and 1064 nm, a complementary pyrometer which measures the spectral radiance ratio at those wavelengths, a long-range 660 nm photonic Doppler velocimeter, and a B-dot probe array from which the aforementioned intrinsic properties may be inferred. Available results are compared to a 3-D MHD ALEGRA simulation of the full dynamic load and return conductor geometry with a two-loop external coupled circuit.

  6. Electrical conductivity of the dusty plasma in the Enceladus plume

    Science.gov (United States)

    Yaroshenko, V. V.; Lühr, H.

    2016-11-01

    The plasma conductivity is an important issue for understanding the magnetic field structure registered by Cassini in the Enceladus proximity. We have revise the conductivity mechanism to incorporate the plume nanograins as a new plasma species and take into account the relevant collisional processes including those accounting for the momentum exchange between the charged dust and co-rotating ions. It is concluded that in the Enceladus plume the dust dynamics affects the Pedersen and Hall conductivity more efficiently than the electron depletion associated with the presence of the negatively charged dust as has been suggested by Simon et al. (Simon, S., Saur, J., Kriegel, H., Neubauer, F. M., Motschmann, U., and Dougherty, U. [2011] J. Geophys. Res., 116, A04221, doi:10.1029/2010JA016338). The electron depletion remains a decisive factor for only the parallel conductivity. In the parameter regime relevant for the Enceladus plume, one finds increase of the Pedersen and decrease of the parallel components, whereas for the Hall conductivity the charged dust changes both - its value and the sign. The associated reversed Hall effect depends significantly upon the local dust-to-plasma density ratio. An onset of the reversed Hall effect appears to be restricted to outer parts of the Enceladus plume. The results obtained can significantly modify Enceladus' Alfvén wing structure and thus be useful for interpretations of the magnetic field perturbations registered by the Cassini Magnetometer during the close Enceladus flybys.

  7. Electrical conductance through nanocontacts between fcc(100) electrodes of gold

    Energy Technology Data Exchange (ETDEWEB)

    Koudela, Daniela; Lopez-Acevedo, Olga; Walter, Michael [Department of Physics, Nanoscience Center, P.O. Box 35, FIN-40014 University of Jyvaeskylae (Finland); Haekkinen, Hannu [Department of Physics, Nanoscience Center, P.O. Box 35, FIN-40014 University of Jyvaeskylae (Finland); Department of Chemistry, P.O. Box 35, FIN-40014 University of Jyvaeskylae (Finland)

    2008-07-01

    Both experimental and theoretical work has been done to explain conductance curves for metal nanowires, giving presently a good model that allows to explain experimental results microscopically. For one atom contacts it has moreover been shown, theoretically and experimentally, a strong relation between the number of valence orbitals of the single atom and the maximum value of the conductance that can be obtained. We have studied Au nanowires of different lengths connected to fcc(100) tips corresponding to possible configurations in the elongation process. For those systems we have calculated the self-consistent potential obtained with Density Functional Theory and used it to calculate the conductance using the recursion-transfer-matrix method. Our results show that though gold has formally only one valence electron (6s), for wires shorter than 3 atoms there are 3 (partially) open eigenmodes.

  8. Effect of neutron flux on the frequency dependencies of electrical conductivity of silicon nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Huseynov, E.; Garibli, A., E-mail: elchin.huse@yahoo.com [National Nuclear Research Center, Department of Nanotechnology and Radiation Material Science, 1073, Inshaatchilar pr. 4, Baku (Azerbaijan)

    2016-11-01

    It has been reviewed the frequency dependencies of electrical conductivity of nanoparticles affected by neutron flux at different times and initial state, at various constant temperatures such as 100, 200, 300 and 400 K. Measurements have been carried out at each temperature at the different 97 values of frequency in the 1 Hz - 1 MHz range. From interdependence between real and imaginary parts of electrical conductivity it has been determined the type of conductivity. Moreover, in the work it is given the mechanism of electrical conductivity according to the obtained results. (Author)

  9. Electrical conductivity anisotropy of partially molten peridotite under shear deformation

    Science.gov (United States)

    Zhang, B.; Yoshino, T.; Yamazaki, D.; Manthilake, G. M.; Katsura, T.

    2013-12-01

    Recent ocean bottom magnetotelluric investigations have revealed a high-conductivity layer (HCL) with high anisotropy characterized by higher conductivity values in the direction parallel to the plate motion beneath the southern East Pacific Rise (Evans et al., 2005) and beneath the edge of the Cocos plate at the Middle America trench offshore of Nicaragua (Naif et al., 2013). These geophysical observations have been attributed to either hydration (water) of mantle minerals or the presence of partial melt. Currently, aligned partial melt has been regarded as the most preferable candidate for explaining the conductivity anisotropy because of the implausibility of proton conduction (Yoshino et al., 2006). In this study, we report development of the conductivity anisotropy between parallel and normal to shear direction on the shear plane in partial molten peridotite as a function of time and shear strain. Starting samples were pre-synthesized partial molten peridotite, showing homogeneous melt distribution. The partially molten peridotite samples were deformed in simple shear geometry at 1 GPa and 1723 K in a DIA-type apparatus with uniaxial deformation facility. Conductivity difference between parallel and normal to shear direction reached one order, which is equivalent to that observed beneath asthenosphere. In contrast, such anisotropic behavior was not found in the melt-free samples, suggesting that development of the conductivity anisotropy was generated under shear stress. Microstructure of the deformed partial molten peridotite shows partial melt tends to preferentially locate grain boundaries parallel to shear direction, and forms continuously thin melt layer sub-parallel to the shear direction, whereas apparently isolated distribution was observed on the section perpendicular to the shear direction. The resultant melt morphology can be approximated by tube like geometry parallel to the shear direction. This observation suggests that the development of

  10. Evaluation of Electrical and Thermal Conductivity of Polymeric ...

    African Journals Online (AJOL)

    PROF HORSFALL

    application was compressed in a wooden mold to form tablets of the doped polymers. On testing ... as in most African countries owing to the dual problem of increase in waste .... polymers or plastics is 1016 Ωm while conductive additives can ...

  11. Atrioventricular conduction in mammalian species: Hemodynamic and electrical scaling

    NARCIS (Netherlands)

    Meijler, F.L.; Billette, J.; Jalife, J.; Kik, M.J.L.; Reiber, J.H.C.; Stokhof, A.A.; Westenberg, J.J.M.; Wassenaar, C.; Strackee, J.

    2005-01-01

    OBJECTIVES The purpose of this study was to investigate scaling of the duration of late diastolic left ventricular (LV) filling in relation to AV conduction time (delay) (PR interval on the ECG) in mammals. BACKGROUND From mouse to whale, AV delay increases 10-fold, whereas body mass increases one m

  12. Experimental Study on the Electrical Conductivity of Pyroxene Andesite at High Temperature and High Pressure

    Science.gov (United States)

    Hui, KeShi; Dai, LiDong; Li, HePing; Hu, HaiYing; Jiang, JianJun; Sun, WenQing; Zhang, Hui

    2016-09-01

    The electrical conductivity of pyroxene andesite was in situ measured under conditions of 1.0-2.0 GPa and 673-1073 K using a YJ-3000t multi-anvil press and Solartron-1260 Impedance/Gain-phase analyzer. Experimental results indicate that the electrical conductivities of pyroxene andesite increase with increasing temperature, and the electrical conductivities decrease with the rise of pressure, and the relationship between electrical conductivity (σ) and temperature (T) conforms to an Arrhenius relation within a given pressure and temperature range. When temperature rises up to 873-923 K, the electrical conductivities of pyroxene andesite abruptly increase, and the activation enthalpy increases at this range, which demonstrates that pyroxene andesite starts to dehydrate. By the virtue of the activation enthalpy (0.35-0.42 eV) and the activation volume (-6.75 ± 1.67 cm3/mole) which characterizes the electrical properties of sample after dehydration, we consider that the conduction mechanism is the small polaron conduction before and after dehydration, and that the rise of carrier concentration is the most important reason of increased electrical conductivity.

  13. Highly electrically conductive nanocomposites based on polymer-infused graphene sponges.

    Science.gov (United States)

    Li, Yuanqing; Samad, Yarjan Abdul; Polychronopoulou, Kyriaki; Alhassan, Saeed M; Liao, Kin

    2014-04-11

    Conductive polymer composites require a three-dimensional 3D network to impart electrical conductivity. A general method that is applicable to most polymers for achieving a desirable graphene 3D network is still a challenge. We have developed a facile technique to fabricate highly electrical conductive composite using vacuum-assisted infusion of epoxy into graphene sponge GS scaffold. Macroscopic GSs were synthesized from graphene oxide solution by a hydrothermal method combined with freeze drying. The GS/epoxy composites prepared display consistent isotropic electrical conductivity around 1 S/m, and it is found to be close to that of the pristine GS. Compared with neat epoxy, GS/epoxy has a 12-orders-of-magnitude increase in electrical conductivity, attributed to the compactly interconnected graphene network constructed in the polymer matrix. This method can be extended to other materials to fabricate highly conductive composites for practical applications such as electronic devices, sensors, actuators, and electromagnetic shielding.

  14. Modeling of heat evolution in silicate building materials with electrically conductive admixtures

    Science.gov (United States)

    Fiala, Lukáš; Maděra, Jiří; Vejmelková, Eva; Černý, Robert

    2016-12-01

    Silicate building materials are electrically non-conductive, in general. However, a sufficient amount of electrically conductive admixtures can significantly increase their electrical conductivity. Consequently, new practical applications of such materials are available. Materials with enhanced electrical properties can be used as self-sensing sensors monitoring evolution of cracks, electromagnetic shields or cores of deicing systems. This paper deals with the modeling of heat evolution in silicate building materials by the action of passing electric current. Due to the conducting paths formed in the material's matrix by adding a sufficient amount of electrically conductive admixture and applying electric voltage on the installed electrodes, electric current is passing through the material. Thanks to the electric current, Joule heat is successively evolved. As it is crucial to evaluate theoretically the amount of evolved heat in order to assess the effectiveness of such a system, a model describing the Joule heat evolution is proposed and a modeling example based on finite-element method is introduced.

  15. Piezoresistance in p-type silicon revisited

    DEFF Research Database (Denmark)

    Richter, Jacob; Pedersen, Jesper; Brandbyge, Mads;

    2008-01-01

    We calculate the shear piezocoefficient pi44 in p-type Si with a 6×6 k·p Hamiltonian model using the Boltzmann transport equation in the relaxation-time approximation. Furthermore, we fabricate and characterize p-type silicon piezoresistors embedded in a (001) silicon substrate. We find that the ...

  16. Apparent Electrical Conductivity of Porous Titanium Prepared by the Powder Metallurgy Method

    Institute of Scientific and Technical Information of China (English)

    LI Cheng-Feng; ZHU Zhen-Gang

    2005-01-01

    @@ Porous titanium is produced by the powder metallurgy method. Dependence of the electrical conductivity on the porosity and pore size is investigated and the experimental results are compared with a number of models. It is found that the minimum solid area model could be successfully applied to describe the relationship between the electrical conductivity and the porosity of porous titanium. This kind of conductivity increases with increasing pore sizes.

  17. Laboratory measurements of electrical conductivities of hydrous and dry Mount Vesuvius melts under pressure

    Science.gov (United States)

    Pommier, A.; Gaillard, F.; Pichavant, M.; Scaillet, B.

    2008-05-01

    Quantitative interpretation of MT anomalies in volcanic regions requires laboratory measurements of electrical conductivities of natural magma compositions. The electrical conductivities of three lava compositions from Mount Vesuvius (Italy) have been measured using an impedance spectrometer. Experiments were conducted on both glasses and melts between 400 and 1300°C, at both ambient pressure in air and high pressures (up to 400 MPa). Both dry and hydrous (up to 5.6 wt % H2O) melt compositions were investigated. A change of the conduction mechanism corresponding to the glass transition was systematically observed. The conductivity data were fitted by sample-specific Arrhenius laws on either side of Tg. The electrical conductivity increases with temperature and is higher in the order tephrite, phonotephrite to phonolite. For the three investigated compositions, increasing pressure decreases the conductivity, although the effect of pressure is relatively small. The three investigated compositions have similar activation volumes (ΔV = 16-24 cm3 mol-1). Increasing the water content of the melt increases the conductivity. Comparison of activation energies (Ea) from conductivity and sodium diffusion and use of the Nernst-Einstein relation allow sodium to be identified as the main charge carrier in our melts and presumably also in the corresponding glasses. Our data and those of previous studies highlight the correlation between the Arrhenius parameters Ea and σ0. A semiempirical method allowing the determination of the electrical conductivity of natural magmatic liquids is proposed, in which the activation energy is modeled on the basis of the Anderson-Stuart model, σ0 being obtained from the compensation law and ΔV being fitted from our experimental data. The model enables the electrical conductivity to be calculated for the entire range of melt compositions at Mount Vesuvius and also satisfactorily predicts the electrical response of other melt compositions

  18. Reversible Control of Anisotropic Electrical Conductivity using Colloidal Microfluidic Networks

    Science.gov (United States)

    2007-04-17

    steady electrophoresis (EP), AC-electro- osmosis (ACEO), and dielectrophoresis (DEP) effects (explained in detail later in this report). Figure 2 shows...capacitance (compare Figs. 2i and 2a). At moderate forcing frequencies (~ 1 kHz) we observe onset of AC electro- osmosis (ACEO), which forms an impinging...resistance can also be seen to be fairly constant at high frequencies, with a value that is inversely proportional to the conductivity of the solution

  19. Lorentz force sigmometry: a novel technique for measuring the electrical conductivity of solid and liquid metals

    Science.gov (United States)

    Alkhalil, Shatha; Kolesnikov, Yurii; Thess, André

    2015-11-01

    In this paper, a novel method to measure the electrical conductivity of solid and molten metals is described. We term the method ‘Lorentz force sigmometry’, where the term ‘sigmometry’ refers to the letter sigma σ, often used to denote the electrical conductivity. The Lorentz force sigmometry method is based on the phenomenon of eddy currents generation in a moving conductor exposed to a magnetic field. Based on Ampere’s law, the eddy currents in turn generate a secondary magnetic field; as a result, the Lorentz force acts to brake the conductor. Owing to Newton’s third law, a measurable force, which is equal to the Lorentz force and is directly proportional to the electrical conductivity of the conductive fluid or solid, acts on the magnet. We present the results of the measurements performed on solids along with the initial measurements on fluids with a eutectic alloy composition of Ga67In20.5Sn12.5; detailed measurements on molten metals are still in progress and will be published in the future. We conducted a series of experiments and measured the properties of known electrical conductive metals, including aluminum and copper, to compute the calibration factor of the device, and then used the same calibration factor to estimate the unknown electrical conductivity of a brass bar. The predicted electrical conductivity of the brass bar was compared with the conductivity measured with a commercial device called ‘SigmaTest’ the observed error was less than 0.5%.

  20. Enhanced Electrical Conductivity of Aluminum by Carbon Nanotube Hybrid Dilution

    Science.gov (United States)

    Stigers, Shelby; Savadelis, Alexader; Carruba, Kathryn; Johns, Kiley; Adu, Kofi

    2015-03-01

    Carbon nanotubes (CNTs) have been recognized as potential candidate for reinforcements in lightweight metals. A composite consisting of CNTs embedded in an Al-matrix might work as an ultra-low-resistive material with the potential of having a room-temperature resistivity far below Al, Cu and Ag. While several advances have been made in developing Al-CNT composites, three major challenges: (1) interfacial bond strength between CNT and the Al matrix, (2) homogeneous dispersion of the CNTs in the Al matrix and impurity (CNTs) scattering centers, continue to limit progress in Al-CNT composites. Several conventional methods including powder metallurgy, melting and solidification, thermal spray and electrochemical deposition have been used to process Al and CNT to form composites. We present preliminary results that address these challenges and demonstrate the fabrication of easily drawable Al-CNT composites into wires of diameter <= 1.0mm with ~ 18% +/- 2% reduction in the electrical resistivity of Al-CNT composite using CNT-hybrid as reinforcement and an inductive melting technique that takes advantage of the induced eddy current in the melt to provide in-situ stirring. This Work is Supported by Penn State Altoona Undergraduate Research Sponsored Program and Penn State Materials Research Institute, University Park.

  1. Factors affecting the pH and electrical conductivity of MgO–ethylene glycol nanofluids

    Indian Academy of Sciences (India)

    Saheed A Adio; Mohsen Sharifpur; Josua P Meyer

    2015-09-01

    The pH and electrical conductivity are important properties of nanofluids that have not been widely studied, especially with regard to temperature and ultrasonication energy. To study the factors that affect the pH and electrical conductivity of magnesium oxide–ethylene glycol (MgO–EG) nanofluid, the effects of temperature, volume fraction, particle size and ultrasonication energy were investigated. Two different sizes of MgO were dispersed in EG base fluid up to the volume fraction of 3%, and the pH and electrical conductivity were monitored between the temperatures of 20 and 70°C. Characterization by transmission electron microscopy and size analyses revealed the morphology and sizes of the nanoparticle samples. The pH values dropped consistently with the increase of temperature, while electrical conductivity value increased with the increase of temperature. The experimental result showed that the increase in the MgO volume fraction increased both the pH and electrical conductivity values of the MgO–EG nanofluid. There was no recognizable influence of ultrasonication energy density on the pH and electrical conductivity of the nanofluid; therefore, it was concluded that temperature, volume fraction and particle size are the predominant factors affecting both the pH and electrical conductivity of MgO–EG nanofluid within the present experimental conditions.

  2. Estimation of electric conductivity of the quark gluon plasma via asymmetric heavy-ion collisions

    CERN Document Server

    Hirono, Yuji; Hirano, Tetsufumi

    2012-01-01

    We show that in asymmetric heavy-ion collisions, especially off-central Cu+Au collisions, a sizable strength of electric field directed from Au nucleus to Cu nucleus is generated in the overlapping region, because of the difference in the number of electric charges between the two nuclei. This electric field would induce an electric current in the matter created after the collision, which result in a dipole deformation of the charge distribution. The directed flow parameters $v_1^{\\pm}$ of charged particles turn out to be sensitive to the charge dipole and provide us with information about electric conductivity of the quark gluon plasma.

  3. Nanoionics phenomenon in proton-conducting oxide: Effect of dispersion of nanosize platinum particles on electrical conduction properties

    Directory of Open Access Journals (Sweden)

    Hiroshige Matsumoto et al

    2007-01-01

    Full Text Available High-temperature proton conductors are oxides in which low-valence cations are doped as electron acceptors; the incorporation of water molecules into the oxides results in the formation of protonic defects that act as charge carriers. Since the protons thus formed are in equilibrium with other electronic defects, electrons and holes, the oxides possibly have different proton-conduction properties at and near boundaries when they are in contact with another phase. In this paper, we present our recent experimental observation of a marked change in the electrical properties of a proton conductor upon the dispersal of fine platinum particles in the oxide. First, the material shows extremely low electrical conductivity in comparison with the original proton-conducting perovskite. Second, there was a threshold amount of platinum at which such a drop in conductivity occurred. A percolation model is employed to explain these experimental results; the fine platinum particles dispersed in the proton-conducting oxide wears highly resistive skin that is formed due to shifts in defect equilibriums, which prevents ionic/electronic conduction. The experiments suggest that the ion-conducting properties of oxides can be varied by introducing interfaces at a certain density; nanoionics is a key to yielding enhanced and/or controlled ionic conduction in solids.

  4. Electrically conductive fabric based stretchable triboelectric energy harvester

    Science.gov (United States)

    Haque, Rubaiyet I.; Farine, Pierre-André; Briand, Danick

    2016-11-01

    Stretchable conductive fabric-based triboelectric generator (TENG), to develop breathing/chest band for harvesting energy at low frequency has been developed. Stretchable conductive nylon-fabric and carbon-based elastomer composites were used as electrodes. During this work, film casting technique was implemented and combination of different materials, such as, polydimethylsiloxane (PDMS) and polytetrafluoroethylene (PTFE)/ polyurethane (PU) were tested as triboelectric layers. The process was compatible with large scale fabrication. At low operation frequency of 1.0±0.1 Hz for the strain of 13±1.5%, developed TENGs provide output power densities of 0.06 μW/cm2 and 0.11 μW/cm2 for the load resistance of 100 MΩ, and energy density of 0.19±0.03 nJ/cm2/cycle and 0.08±0.01 nJ/cm2/cycle for the use of capacitor of 2.2 μF, for PDMS-PTFE and PDMS-PU based TENGs respectively.

  5. Effect of ion radiation on the electrical conductivity of zirconia

    Energy Technology Data Exchange (ETDEWEB)

    Frangul' yan, T.; Pichugin, V.; Ryabchikov, A. [and others

    2001-07-01

    It is well-known that ion bombardment of the surface of a large number of dielectrics causes the surface the transfer to the conducting state. When the heating the specimens to high temperature in vacuum, oxygen is removed in the neutral state from the zirconia lattice, leaving a vacancy in the lattice and two electrons (non-stoichiometry of the second type). The formation of non-stoichiometry in this case takes place under thermodynamically equilibrium conditions. The deviation of stoichiometry is accompanied by changes of the electronic states in the lattice. The excess electrons are distributed between internal and impunity defects of the crystal lattice, filling the levels in the forbidden zone of the dielectrics. This is reflected in the change of the colour (darkening) of the specimens. In radiation treatment, the formation of non-stoichiometry with respect to the oxygen of the second type takes place on the background of the global structural rearrangement of the lattice, associated with the formation of radiation defects. In this work, we have attempted to analyse the effect of these types of non-stoichiometry on the formation of the conducting state in the dielectrics.

  6. Experimental study on electrical conductivity of dunite at high temperature and pressure—— The evidence of electrical conductivity of cold mantle in the Gaize-Lugu area

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The electrical conductivities of the dunite from the Qinghai-Xizang (Tibetan) Plateau were measured with the impedance spectra method at 1.0 -4.0 GPa and 643-1093 K. The experimental results indicated that activation enthalpies of the dunite are smaller than 0.9 eV, the conduction mechanism in dunite may be attributed to the mixed electrical conduction involving grain interiors and boundaries. On the basis of the results of this experiment, we can deduce that there exists cold mantle in the area of Gaize- Lugu in the Qinghai-Xizang (Tibetan) Plateau by reverse methods from the magnetotelluric sounding data (conductivity-depths profile) available for western Tibet. The result provides the present cold mantle viewpoint with strong proof on the basis of high temperature and pressure experiments.

  7. Seebeck effect influence on joule heat evolution in electrically conductive silicate materials

    Science.gov (United States)

    Fiala, Lukáš; Medved, Igor; Maděra, Jiří; Černý, Robert

    2016-07-01

    In general, silicate building materials are non-conductive matters that are not able to evolve heat when they are subjected to an external voltage. However, the electrical conductivity can be increased by addition of electrically conductive admixtures in appropriate amount which leads to generation of conductive paths in materials matrix. Such enhanced materials can evolve Joule heat and are utilizable as a core of self-heating or snow-melting systems. In this paper, Joule heat evolution together with Seebeck effect in electrically conductive silicate materials was taken into consideration and the model based on heat equation with included influence of DC electric field was proposed. Besides, a modeling example of heating element was carried out on FEM basis and time development of temperature in chosen surface points was expressed in order to declare ability of such system to be applicable.

  8. The electrical conductivity characteristics of Fe/Cu nano-scale multilayer materials

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    A mathematical model for describing the relationship betweenelectrical conductivity and the thickness of bilayer, ratio of sublayer thickness of a nano-scale multilayer material (MLM) is presented. Fe/Cu MLM was synthesized by electron beam physical vapor deposition (EB-PVD) technique, and the dependence of electrical conductivity of Fe/Cu MLM on the bilayer thickness and ratio of sublayer thickness were investigated. It is shown that the electrical conductivity of Fe/Cu MLM with fixed ratio of sublayer thickness decreases sharply when the thickness of bilayer becomes thinner than 30 nm. When the bilayer thickness is kept constant, the electrical conductivity linearly decreases with the increasing ratio of sublayer thickness. The values of parameters in the model were obtained by fitting the measured results of electrical conductivity of Fe/Cu MLM with fixed ratio of sublayer thickness. It is found that the calculated values agree well with measured ones.

  9. Electrical conductivity of lunar surface rocks - Laboratory measurements and implications for lunar interior temperatures

    Science.gov (United States)

    Schwerer, F. C.; Huffman, G. P.; Fisher, R. M.; Nagata, T.

    1974-01-01

    Results are reported for laboratory measurements of the dc and low-frequency ac electrical conductivity of three lunar rocks with ferrous iron contents of 5 to 26 wt %. The measurements were made at temperatures ranging from 20 to 1000 C, and Mossbauer spectroscopy was used to determine the dependence of electrical conductivity on furnace atmosphere. It is found that the magnitude of electrical conductivity generally increases with increasing iron content. A comparison of the data on these samples with data on terrestrial olivines and pyroxenes shows that the electrical conductivity of anhydrous silicate minerals is influenced primarily by the concentration, oxidation state, and distribution of iron, while the silicate crystal structure is only of secondary importance. Lunar interior temperatures are deduced from experimental lunar conductivity profiles, and the resulting temperature-depth profiles are found to be consistent with those calculated for two different lunar evolutionary models as well as with various experimental constraints.

  10. Electrically conductive carbon fibre-reinforced composite for aircraft lightning strike protection

    Science.gov (United States)

    Katunin, Andrzej; Krukiewicz, Katarzyna; Turczyn, Roman; Sul, Przemysław; Bilewicz, Marcin

    2017-05-01

    Aircraft elements, especially elements of exterior fuselage, are subjected to damage caused by lightning strikes. Due to the fact that these elements are manufactured from polymeric composites in modern aircraft, and thus, they cannot conduct electrical charges, the lightning strikes cause burnouts in composite structures. Therefore, the effective lightning strike protection for such structures is highly desired. The solution presented in this paper is based on application of organic conductive fillers in the form of intrinsically conducting polymers and carbon fabric in order to ensure electrical conductivity of whole composite and simultaneously retain superior mechanical properties. The presented studies cover synthesis and manufacturing of the electrically conductive composite as well as its characterization with respect to mechanical and electrical properties. The performed studies indicate that the proposed material can be potentially considered as a constructional material for aircraft industry, which characterizes by good operational properties and low cost of manufacturing with respect to current lightning strike protection materials solutions.

  11. In situ electrical conductivity measurements of H2O under static pressure up to 28 GPa

    Science.gov (United States)

    Liu, Bao; Gao, Yang; Han, Yonghao; Ma, Yanzhang; Gao, Chunxiao

    2016-08-01

    The in situ electrical conductivity measurements on water in both solid state and liquid state were performed under pressure up to 28 GPa and temperature from 77 K to 300 K using a microcircuit fabricated on a diamond anvil cell (DAC). Water chemically ionization mainly contributes to electrical conduction in liquid state, which is in accord with the results obtained under dynamic pressure. Energy band theory of liquid water was used to understand effect of static pressure on electrical conduction of water. The electric conductivity of H2O decreased discontinuously by four orders of magnitude at 0.7-0.96 GPa, indicating water frozen at this P-T condition. Correspondingly, the conduction of H2O in solid state is determined by arrangement and bending of H-bond in ice VI and ice VII. Based on Jaccard theory, we have concluded that the charge carriers of ice are already existing ions and Bjerrum defects.

  12. Double-Wall Nanotubes and Graphene Nanoplatelets for Hybrid Conductive Adhesives with Enhanced Thermal and Electrical Conductivity.

    Science.gov (United States)

    Messina, Elena; Leone, Nancy; Foti, Antonino; Di Marco, Gaetano; Riccucci, Cristina; Di Carlo, Gabriella; Di Maggio, Francesco; Cassata, Antonio; Gargano, Leonardo; D'Andrea, Cristiano; Fazio, Barbara; Maragò, Onofrio Maria; Robba, Benedetto; Vasi, Cirino; Ingo, Gabriel Maria; Gucciardi, Pietro Giuseppe

    2016-09-07

    Improving the electrical and thermal properties of conductive adhesives is essential for the fabrication of compact microelectronic and optoelectronic power devices. Here we report on the addition of a commercially available conductive resin with double-wall carbon nanotubes and graphene nanoplatelets that yields simultaneously improved thermal and electrical conductivity. Using isopropanol as a common solvent for the debundling of nanotubes, exfoliation of graphene, and dispersion of the carbon nanostructures in the epoxy resin, we obtain a nanostructured conducting adhesive with thermal conductivity of ∼12 W/mK and resistivity down to 30 μΩ cm at very small loadings (1% w/w for nanotubes and 0.01% w/w for graphene). The low filler content allows one to keep almost unchanged the glass-transition temperature, the viscosity, and the curing parameters. Die shear measurements show that the nanostructured resins fulfill the MIL-STD-883 requirements when bonding gold-metalized SMD components, even after repeated thermal cycling. The same procedure has been validated on a high-conductivity resin characterized by a higher viscosity, on which we have doubled the thermal conductivity and quadrupled the electrical conductivity. Graphene yields better performances with respect to nanotubes in terms of conductivity and filler quantity needed to improve the resin. We have finally applied the nanostructured resins to bond GaN-based high-electron-mobility transistors in power-amplifier circuits. We observe a decrease of the GaN peak and average temperatures of, respectively, ∼30 °C and ∼10 °C, with respect to the pristine resin. The obtained results are important for the fabrication of advanced packaging materials in power electronic and microwave applications and fit the technological roadmap for CNTs, graphene, and hybrid systems.

  13. Electrical measurements in the atmosphere and the Ionosphere over an active thunderstorm. II - Direct current electric fields and conductivity

    Science.gov (United States)

    Holzworth, R. H.; Kelley, M. C.; Siefring, C. L.; Hale, L. C.; Mitchell, J. D.

    1985-01-01

    On August 9, 1981, a series of three rockets was launched over an air mass thunderstorm off the eastern seaboard of Virginia while simultaneous stratospheric and ground-based electric field measurements were made. The conductivity was substantially lower at most altitudes than the conductivity profiles used by theoretical models. Direct current electric fields over 80 mV/m were measured as far away as 96 km from the storm in the stratosphere at 23 km altitude. No dc electric fields above 75 km altitude could be identified with the thunderstorm, in agreement with theory. However, vertical current densities over 120 pA/sq m were seen well above the classical 'electrosphere' (at 50 or 60 km). Frequent dc shifts in the electric field following lightning transients were seen by both balloon and rocket payloads. These dc shifts are clearly identifiable with either cloud-to-ground (increases) or intercloud (decreases) lightning flashes.

  14. Optical Conductivity of Impurity-Doped Parabolic Quantum Wells in an Applied Electric Field

    Institute of Scientific and Technical Information of China (English)

    GUO Kang-Xian; CHEN Chuan-Yu

    2005-01-01

    The optical conductivity of impurity-doped parabolic quantum wells in an applied electric field is investigated with the memory-function approach, and the analytic expression for the optical conductivity is derived. With characteristic parameters pertaining to GaAs/Ga1-xAlxAs parabolic quantum wells, the numerical results are presented.It is shown that, the smaller the well width, the larger the peak intensity of the optical conductivity, and the more asymmetric the shape of the optical conductivity; the optical conductivity is more sensitive to the electric field, the electric field enhances the optical conductivity; when the dimension of the quantum well increases, the optical conductivity increases until it reaches a maximum value, and then decreases.

  15. Comment on 'Electronic Properties of Red P-Type T12S5 Single Crystals'

    Institute of Scientific and Technical Information of China (English)

    M. Cankurtaran; H. (C)elik

    2007-01-01

    Recently, Gamal et al. [Chin. Phys. Lett. 22 (2005) 1530] reported the results of electrical conductivity, Hall effect and thermoelectric measurements on p-type Th2S5 single crystals. From the experimental data for the temperature dependence of differential thermoelectric power, Gamal et al. determined the values of 2.66 × 10-41 kg and 2.50 × 10-41 kg, respectively, for the effective masses of electrons and holes in p-type Tl2S5, which are about ten orders of magnitude smaller than the free electron mass (9.11 × 10-31 kg). We argue that the anomalously small values obtained for the effective mass of charge carriers in Tl2S5 have no physical significance.

  16. Perspectives of High-Temperature Thermoelectric Applications and p-type and n-type Aluminoborides

    Science.gov (United States)

    Mori, T.

    2016-10-01

    A need exists to develop high-temperature thermoelectric materials which can utilize high-temperature unutilized/waste heat in thermal power plants, steelworks, factories, incinerators, etc., and also focused solar power. The thermal power plant topping application is of potential high impact since it can sizably increase the efficiency of power plants which are the major supply of electrical power for many countries. Higher borides are possible candidates for their particular high-temperature stability, generally large Seebeck coefficients, α, and intrinsic low thermal conductivity. Excellent (|α| > 200 μV/K) p-type or n-type behavior was recently achieved in the aluminoboride YAl x B14 by varying the occupancy of Al sites, x. Finding p-type and n-type counterparts has long been a difficulty of thermoelectric research not limited to borides. This paper reviews possible high-temperature thermoelectric applications, and recent developments and perspectives of thermoelectric aluminoborides.

  17. Music through the skin—simple demonstration of human electrical conductivity

    Science.gov (United States)

    Vollmer, M.; Möllmann, K. P.

    2016-05-01

    The conduction of electricity is an important topic for any basic physics course. Issues of safety often results in teacher demonstration experiments in front of the class or in extremely simple though—for students—not really fascinating (not to say boring) hands on activities for everybody using 1.5 V batteries, cables and light bulbs etc. Here we briefly review some basic facts about conduction of electricity through the human body and report a simple, safe, and awe inspiring electrical conduction experiment which can be performed with little preparation by a teacher involving the whole class of say 20 students.

  18. Tunable electrical conductivity in metal-organic framework thin film devices

    Energy Technology Data Exchange (ETDEWEB)

    Talin, Albert Alec; Allendorf, Mark D.; Stavila, Vitalie; Leonard, Francois

    2016-08-30

    A composition including a porous metal organic framework (MOF) including an open metal site and a guest species capable of charge transfer that can coordinate with the open metal site, wherein the composition is electrically conductive. A method including infiltrating a porous metal organic framework (MOF) including an open metal site with a guest species that is capable of charge transfer; and coordinating the guest species to the open metal site to form a composition including an electrical conductivity greater than an electrical conductivity of the MOF.

  19. Tunable electrical conductivity in metal-organic framework thin film devices

    Energy Technology Data Exchange (ETDEWEB)

    Talin, Albert Alec; Allendorf, Mark D.; Stavila, Vitalie; Leonard, Francois

    2016-05-24

    A composition including a porous metal organic framework (MOF) including an open metal site and a guest species capable of charge transfer that can coordinate with the open metal site, wherein the composition is electrically conductive. A method including infiltrating a porous metal organic framework (MOF) including an open metal site with a guest species that is capable of charge transfer; and coordinating the guest species to the open metal site to form a composition including an electrical conductivity greater than an electrical conductivity of the MOF.

  20. Fluctuations of Electrical Conductivity: A New Source for Astrophysical Magnetic Fields.

    Science.gov (United States)

    Pétrélis, F; Alexakis, A; Gissinger, C

    2016-04-22

    We consider the generation of a magnetic field by the flow of a fluid for which the electrical conductivity is nonuniform. A new amplification mechanism is found which leads to dynamo action for flows much simpler than those considered so far. In particular, the fluctuations of the electrical conductivity provide a way to bypass antidynamo theorems. For astrophysical objects, we show through three-dimensional global numerical simulations that the temperature-driven fluctuations of the electrical conductivity can amplify an otherwise decaying large scale equatorial dipolar field. This effect could play a role for the generation of the unusually tilted magnetic field of the iced giants Neptune and Uranus.

  1. Thermodynamic parameters of elasticity and electrical conductivity of reinforced natural rubber (nr vulca nizates

    Directory of Open Access Journals (Sweden)

    B.F. Adeosun

    2004-12-01

    Full Text Available The thermodynamic parameters (change in free energy of elasticity, ΔGe; change in enthalpy of elasticity, ΔHe; and change in entropy of elasticity, ΔSe and the electrical conductivity of natural rubber composites reinforced separately with some agricultural wastes have been determined. Results show that the reinforced composites are relatively more ordered and more spontaneous to elasticity than the unreinforced composite. These more ordered composites were observed to conduct electricity better than the unreinforced. The inclusion of the agricultural wastes examined in the formulation of natural rubber composite enhances the elasticity and the electrical conductivity of natural rubber.

  2. Effect of gamma irradiation on DC electrical conductivity of ZnO nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Swaroop, K.; Somashekarappa, H. M., E-mail: carrtmu@gmail.com [Centre for Application of Radioisotopes and Radiation Technology (CARRT), USIC, Mangalore University, Mangalagangotri-574199, Karnataka (India); Naveen, C. S.; Jayanna, H. S. [Department of PG Studies and Research in Physics, Kuvempu University, Shankaraghatta-577451, Shimoga, Karnataka (India)

    2015-06-24

    The temperature dependent dc electrical conductivity of gamma irradiated Zinc oxide (ZnO) nanoparticles is presented in this paper. The X-ray diffraction (XRD) pattern shows hexagonal wurtzite structure of ZnO. Fourier Transform Infrared Spectroscopy (FTIR) confirms Zn-O stretching vibrations. UV-Visible spectroscopy studies show that the energy band gap (E{sub g}) of the prepared ZnO nanoparticles increases with respect to gamma irradiation dose, which can be related to room temperature dc electrical conductivity. The result shows significant variation in the high temperature dc electrical conductivity of ZnO nanoparticles due to gamma irradiation.

  3. Fluctuations of electrical conductivity: a new source for astrophysical magnetic fields

    CERN Document Server

    Petrelis, Francois; Gissinger, Christophe

    2016-01-01

    We consider the generation of magnetic field by the flow of a fluid for which the electrical conductivity is nonuniform. A new amplification mechanism is found which leads to dynamo action for flows much simpler than those considered so far. In particular, the fluctuations of the electrical conductivity provide a way to bypass anti-dynamo theorems. For astrophysical objects, we show through three-dimensional global numerical simulations that the temperature-driven fluctuations of the electrical conductivity can amplify an otherwise decaying large scale equatorial dipolar field. This effect could play a role for the generation of the unusually tilted magnetic field of the iced giants Neptune and Uranus.

  4. Nanostructured Cu-Cr alloy with high strength and electrical conductivity

    Energy Technology Data Exchange (ETDEWEB)

    Islamgaliev, R. K., E-mail: saturn@mail.rb.ru; Nesterov, K. M. [Institute of Physics of Advanced Materials, Ufa State Aviation Technical University, Ufa 450000 (Russian Federation); Bourgon, J.; Champion, Y. [ICMPE-CNRS, Université Paris 12, 6-8 rue Henri Dunant, 94320 Thiais, cedex (France); Valiev, R. Z. [Institute of Physics of Advanced Materials, Ufa State Aviation Technical University, Ufa 450000 (Russian Federation); Laboratory for Mechanics of Bulk Nanostructured Materials, Saint Petersburg State University, 198504 Peterhof, Saint Petersburg (Russian Federation)

    2014-05-21

    The influence of nanostructuring by high pressure torsion (HPT) on strength and electrical conductivity in the Cu-Cr alloy has been investigated. Microstructure of HPT samples was studied by transmission electron microscopy with special attention on precipitation of small chromium particles after various treatments. Effect of dynamic precipitation leading to enhancement of strength and electrical conductivity was observed. It is shown that nanostructuring leads to combination of high ultimate tensile strength of 790–840 MPa, enhanced electrical conductivity of 81%–85% IACS and thermal stability up to 500 °C. The contributions of grain refinement and precipitation to enhanced properties of nanostructured alloy are discussed.

  5. Electrical conductivity of electrolytes applicable to natural waters from 0 to 100 degrees C

    Science.gov (United States)

    McCleskey, R. Blaine

    2011-01-01

    The electrical conductivities of 34 electrolyte solutions found in natural waters ranging from (10-4 to 1) mol•kg-1 in concentration and from (5 to 90) °C have been determined. High-quality electrical conductivity data for numerous electrolytes exist in the scientific literature, but the data do not span the concentration or temperature ranges of many electrolytes in natural waters. Methods for calculating the electrical conductivities of natural waters have incorporated these data from the literature, and as a result these methods cannot be used to reliably calculate the electrical conductivity over a large enough range of temperature and concentration. For the single-electrolyte solutions, empirical equations were developed that relate electrical conductivity to temperature and molality. For the 942 molar conductivity determinations for single electrolytes from this study, the mean relative difference between the calculated and measured values was 0.1 %. The calculated molar conductivity was compared to literature data, and the mean relative difference for 1978 measurements was 0.2 %. These data provide an improved basis for calculating electrical conductivity for most natural waters.

  6. Thermal and Electrical Conductivity of Ge1Sb4Te7 Chalcogenide Alloy

    Science.gov (United States)

    Lan, Rui; Endo, Rie; Kuwahara, Masashi; Kobayashi, Yoshinao; Susa, Masahiro

    2017-02-01

    The unique properties of the Ge1Sb4Te7 alloy as a chalcogenide make it a good candidate for application in phase-change random access memory as well as thermoelectric materials. The thermal and electrical conductivity of the Ge1Sb4Te7 alloy play an important role in both applications. This work aims to determine the thermal conductivity and electrical resistivity of the Ge1Sb4Te7 alloy as a function of temperature and to discuss the thermal conduction mechanism. Thermal conductivity and electrical resistivity were measured from room temperature to 778 K using the hot strip method and the four-terminal method, respectively. The thermal conductivity of the Ge1Sb4Te7 alloy shows an interesting temperature dependence: it decreases up to about 600 K, and then increases with increasing temperature. The electrical resistivity shows a monotonic increase with increasing temperature. Through a discussion of the thermal conductivity results together with electrical resistivity results, it is proposed that electronic thermal conductivity dominates the thermal conductivity, while the bipolar diffusion contributes to the increase in the thermal conductivity at higher temperatures. The resonance bonding existing in this chalcogenide alloy accounts for the low lattice thermal conductivity.

  7. P-type electronic and thermal transport properties of Mg2Sn1-xSix

    Science.gov (United States)

    Kim, Sunphil; Wiendlocha, Bartlomiej; Heremans, Joseph P.

    2013-03-01

    P-type Mg2Sn doped with various acceptors(1)(2) has been studied as a potential thermoelectric material. Because of its narrow band gap and high lattice thermal conductivity, the zT values of the binary compound are limited: zTmax reported is 0.3(3). In this work, we synthesize and characterize p-type-doped Mg2Sn1-xSix with various acceptors. Silicon is added in order to widen the band gap and scatter the phonons. The conduction band degeneracy that yields excellent zT in n-type material in the Mg2Sn1-xSix alloy system unfortunately does not apply to p-type material. Thermomagnetic and galvanomagnetic properties (electrical resistivity, Seebeck, Hall, and Nernst coefficients) are measured, along with thermal conductivity and band gap measurements. Finally, zT values are reported. (1) H. Y. Chen et al. Journal of Electronic Materials, Vol. 38, No. 7, 2009 (2) S. Choi et al. Journal of Electronic Materials, Vol. 41, No. 6, 2012 (3) H. Y. Chen et al. Phys. Status Solidi A 207, No. 11, 2523-2531 (2010) The work is supported by the joint NSF/DOE program on thermoelectrics, NSF-CBET-1048622

  8. Study on delayed cracking of conductive notch under electric field in PZT-5H ferroelectric ceramics

    Institute of Scientific and Technical Information of China (English)

    QIAO Guangli; SU Yanjing; QIAO Lijie; CHU Wuyang

    2006-01-01

    Electric-field-induced delay cracking of conducting notch in PZT-5H ferroelectric ceramics has been studied using a compact specimen with a notch filled in conductive silver paste. The critical electric field that induces instant failure of the PZT-5H specimen is shown to be EF = 14.7(3.2 kV/cm. When an electric field lower than EF, but higher than EDF = 9.9 kV/cm was applied, a micro-crack formed at the conductive notch tip instantly, propagating slowly until the specimen failure. When the electric field was lower than EDF, the micro-crack propagated a short distance, and then stopped. When the electric field was lower than EK=4.9 kV/cm, no cracks formed at the conductive notch tip instantly, however, a delay micro-crack would form and propagate. When the electric field was lower than EDK=2.4 kV/cm, no cracks formed and delay propagation occurred. A model for electric charge emission and concentration at a conductive notch is proposed to explain the delay cracking of conducting notch.

  9. Effects of the electrical conductivity and orientation of silicon substrate on the synthesis of multi-walled carbon nanotubes by thermal chemical vapor deposition

    Science.gov (United States)

    Choi, Hyonkwang; Gong, Jaeseok; Lim, Yeongjin; Im, Ki Hong; Jeon, Minhyon

    2013-02-01

    We studied the effects of the electrical conductivity and orientation of silicon substrate on both catalytic Fe thin film and the structure and morphology of multi-walled carbon nanotube (MWNT) grown by low-pressure chemical vapor deposition. Both p-type Si(100) and Si(111) substrates with three different doping concentrations (high, low, undoped) were used to evaluate the formation of catalytic nanoparticles and the growth of MWNTs. The morphology of catalytic nanoparticles such as size and density was characterized by field-emission scanning electron microscopy, Cs-corrected energy-filtered transmission electron microscopy, and X-ray photoelectron spectroscopy. Structural characteristics of MWNTs grown on different combinations of silicon substrate orientation and electrical conductivities ( σ) were also systematically analyzed. Based on the experimental results, growth modes of MWNTs could be controlled by choosing an appropriate combination of σ and orientation of Si substrates.

  10. The Influence of Preparation Conditions on the Electrical Conductivity of Poly N-Methyl-pyrrole Films

    DEFF Research Database (Denmark)

    Vidanapathirana, K.; Careem, M.A.; Skaarup, Steen

    1999-01-01

    on the electrical conductivity has been investigated. The conductivity was measured by the in situ method using a specially prepared two-band microelectrode. The current density used during the polymerization has a considerable influence on the conductivity, as earlier observed for polypyrrole in non...

  11. Electrical conduction in polycrystalline CVD diamond: Temperature dependent impedance measurements

    Energy Technology Data Exchange (ETDEWEB)

    Ye, H.; Williams, O.A.; Jackman, R.B. [Electronic and Electrical Engineering, University College London, Torrington Place, London WC1E 7JE (United Kingdom); Rudkin, R.; Atkinson, A. [Department of Materials, Imperial College London, South Kensington, London SW7 2AZ (United Kingdom)

    2002-10-16

    In this paper, we report the first measurement of impedance on freestanding diamond films from 0.1 Hz to 10 MHz up to 300 C. A wide range of CVD materials have been investigated, but here we concentrate on 'black' diamond grown by MWPECVD. The Cole-Cole (Z' via Z{sup ''}) plots are well fitted to a RC parallel circuit model and the equivalent resistance and capacitance for the diamond films have been estimated using the Zview curve fitting. The results show only one single semicircle response at each temperature measured. It was found that the resistance decreases from 62 M{omega} at room temperature to 4 k{omega} at 300 C, with an activation energy around 0.51 eV. The equivalent capacitance is maintained at the level of 10{sup 2} pF up to 300 C, suggesting that the diamond grain boundaries are dominating the conduction. At 400 C, the impedance at low frequencies shows a linear tail, which can be explained that the ac polarization of diamond/Au interface occurs. (Abstract Copyright [2002], Wiley Periodicals, Inc.)

  12. Electrical conductivity induced in insulators by pulsed radiation

    Energy Technology Data Exchange (ETDEWEB)

    Ahrens, T.J.; Wooten, F.

    1976-06-01

    The minimum prompt photoconductivity induced by pulses of x rays, gamma rays, and energetic electrons in various amorphous and disordered insulating organic and inorganic materials is predicted on the basis of data for the scattering of hot electrons in solids and the band gap for insulators. For total doses of 3 x 10/sup 4/ to 30 x 10/sup 4/ rad or greater, the minimum prompt photoconductivity is predicted to be linear with dose rate, ..gamma.., and is given by sigma(..cap omega../sup -1/cm/sup -1/) = 5 x 10/sup -19/ rho/sub 0/..gamma../E/sup 2//sub g/, where rho/sub 0/ is the density (g/cm/sup 3/) and E/sub g/ is the optical band gap (eV). This formula agrees well with data for a variety of plastics, mica, and borosilicate glass under widely different irradiation conditions. The formula considerably underestimates absolute values of prompt conductivities observed for Al/sub 2/O/sub 3/, MgO, and certain plastics, because the model does not hold for ordered materials.

  13. Self-monitoring electrically conductive asphalt-based composite containing carbon fillers

    Institute of Scientific and Technical Information of China (English)

    WU Shao-peng; LIU Xiao-ming; YE Qun-shan; LI Ning

    2006-01-01

    A new novel function materials,structure self-monitoring asphalt-based composite was introduced. The results show that the output resistance of electrically conductive asphalt-based composites would change under cyclic loading and vehicle loading action. The resistance change of conductive asphalt-based composites was aroused by the variation of its interior structure. When the fatigue failure was studied,the larger cracks cut the continuous electrically conductive path and the electron is difficult to overcome the potential barrier of gap. In the early period,the slight deformation and microcrack may be recovered due to the viscoelasticity character of asphalt,which leads to some cracks close again,the output resistance changes a little. But with the shear process performs continuously,the cracks become larger and larger,which would cut the conductive path and block off the transition of electrons,and if the cracks are large enough,the pitch-matrix composites containing carbon fillers will lose electrically conductive function. When the rutting failure was studied,the flowage of conductive substance results in the decrease of substance due to electrically conducting and conductive path decreasing. The decrease of electron volume contribute to electrically conducting and large stone aggregate prevent the electron from transiting. In a word,the variation of output resistance is aroused by the variation of interior structure completely.

  14. Four point probe structures with buried electrodes for the electrical characterization of ultrathin conducting films

    NARCIS (Netherlands)

    Groenland, A.W.; Wolters, R.A.M.; Kovalgin, A.Y.; Schmitz, J.

    2009-01-01

    Test structures for the electrical characterization of ultrathin conductive (ALD) films are presented based on buried electrodes on which the ultrathin film is deposited. This work includes test structure design and fabrication, and the electrical characterization of ALD TiN films down to 4 nm. It i

  15. Iodine doped carbon nanotube cables exceeding specific electrical conductivity of metals

    Science.gov (United States)

    Zhao, Yao; Wei, Jinquan; Vajtai, Robert; Ajayan, Pulickel M.; Barrera, Enrique V.

    2011-09-01

    Creating highly electrically conducting cables from macroscopic aggregates of carbon nanotubes, to replace metallic wires, is still a dream. Here we report the fabrication of iodine-doped, double-walled nanotube cables having electrical resistivity reaching ~10-7 Ω.m. Due to the low density, their specific conductivity (conductivity/weight) is higher than copper and aluminum and is only just below that of the highest specific conductivity metal, sodium. The cables exhibit high current-carrying capacity of 104~105 A/cm2 and can be joined together into arbitrary length and diameter, without degradation of their electrical properties. The application of such nanotube cables is demonstrated by partly replacing metal wires in a household light bulb circuit. The conductivity variation as a function of temperature for the cables is five times smaller than that for copper. The high conductivity nanotube cables could find a range of applications, from low dimensional interconnects to transmission lines.

  16. Electrical Conductivity of Synthetic Quartz Crystals at High Temperature and Pressure from Complex Impedance Measurements

    Institute of Scientific and Technical Information of China (English)

    王多君; 李和平; 刘丛强; 易丽; 丁东业; 苏根利; 张卫刚

    2002-01-01

    An electrical conductivity measurement system under high-pressure conditions with a multi-anvil high-pressure apparatus by an ac complex impedance method was set up. With this system, we have successfully measured the electrical conductivity of synthetic quartz under pressure up to approximately 1.0 GPa in the temperature range 661-987K. The values of electrical conductivity decrease with the increasing pressure and increase with the increasing temperature. The activation enthalpies for the α-quartz crystals are 1.10-1.28eV. The electrical conductivity of α-quartz is ionic, with Na ions moving in channels parallel to the c-axis being the predominant current carrier.

  17. Illustrating Electric Conductivity Using the Particle-in-a-Box Model: Quantum Superposition is the Key

    CERN Document Server

    Sivanesan, Umaseh; Izmaylov, Artur F

    2016-01-01

    Most of the textbooks explaining electric conductivity in the context of quantum mechanics provide either incomplete or semi-classical explanations that are not connected with the elementary concepts of quantum mechanics. We illustrate the conduction phenomena using the simplest model system in quantum dynamics, a particle in a box (PIB). To induce the particle dynamics, a linear potential tilting the bottom of the box is introduced, which is equivalent to imposing a constant electric field for a charged particle. Although the PIB model represents a closed system that cannot have a flow of electrons through the system, we consider the oscillatory dynamics of the particle probability density as the analogue of the electric current. Relating the amplitude and other parameters of the particle oscillatory dynamics with the gap between the ground and excited states of the PIB model allows us to demonstrate one of the most basic dependencies of electric conductivity on the valence-conduction band gap of the materia...

  18. A promising structure for fabricating high strength and high electrical conductivity copper alloys.

    Science.gov (United States)

    Li, Rengeng; Kang, Huijun; Chen, Zongning; Fan, Guohua; Zou, Cunlei; Wang, Wei; Zhang, Shaojian; Lu, Yiping; Jie, Jinchuan; Cao, Zhiqiang; Li, Tingju; Wang, Tongmin

    2016-02-09

    To address the trade-off between strength and electrical conductivity, we propose a strategy: introducing precipitated particles into a structure composed of deformation twins. A Cu-0.3%Zr alloy was designed to verify our strategy. Zirconium was dissolved into a copper matrix by solution treatment prior to cryorolling and precipitated in the form of Cu5Zr from copper matrix via a subsequent aging treatment. The microstructure evolutions of the processed samples were investigated by transmission electron microscopy and X-ray diffraction analysis, and the mechanical and physical behaviours were evaluated through tensile and electrical conductivity tests. The results demonstrated that superior tensile strength (602.04 MPa) and electrical conductivity (81.4% IACS) was achieved. This strategy provides a new route for balancing the strength and electrical conductivity of copper alloys, which can be developed for large-scale industrial application.

  19. EVIDENCE FOR MICROBIAL ENHANCED ELECTRICAL CONDUCTIVITY IN HYDROCARBON-CONTAMINATED SEDIMENTS

    Science.gov (United States)

    Electrical conductivity of sediments during microbial mineralization of diesel was investigated in a mesoscale column experiment consisting of biotic contaminated and uncontaminated columns. Microbial population numbers increased with a clear pattern of depth zonation within the ...

  20. Electrical conductivity of molten CdCl{sub 2} at temperatures as high as 1474 K

    Energy Technology Data Exchange (ETDEWEB)

    Salyulev, Alexander B.; Potapov, Alexei M. [Russian Academy of Sciences, Ekaterinburg (Russian Federation). Inst. of High-Temperature Electrochemistry

    2016-11-01

    The electrical conductivity of molten CdCl{sub 2} was measured across a wide temperature range (ΔT=628 K), from 846 K to as high as 1474 K, i.e. 241 above the normal boiling point of the salt. In previous studies, a maximum temperature of 1201 K was reached, this being 273 lower than in the present work. The activation energy of electrical conductivity was calculated.

  1. Hydrothermal Fabrication of Silver Nanowires-Silver Nanoparticles-Graphene Nanosheets Composites in Enhancing Electrical Conductive Performance of Electrically Conductive Adhesives

    Directory of Open Access Journals (Sweden)

    Hongru Ma

    2016-06-01

    Full Text Available Silver nanowires-silver nanoparticles-graphene nanosheets (AgNWs-AgNPs-GN hybrid nanomaterials were fabricated through a hydrothermal method by using glucose as a green reducing agent. The charge carriers of AgNWs-AgNPs-GN passed through defect regions in the GNs rapidly with the aid of the AgNW and AgNP building blocks, leading to high electrical conductivity of electrically conductive adhesives (ECA filled with AgNWs-AgNPs-GN. The morphologies of synthesized AgNWs-AgNPs-GN hybrid nanomaterials were characterized by field emission scanning electron microscope (FESEM, and high resolution transmission electron microscopy (HRTEM. X-ray diffraction (XRD and laser confocal micro-Raman spectroscopy were used to investigate the structure of AgNWs-AgNPs-GN. The resistance of cured ECAs was investigated by the four-probe method. The results indicated AgNWs-AgNPs-GN hybrid nanomaterials exhibited excellent electrical properties for decreasing the resistivity of electrically conductive adhesives (ECA. The resistivity of ECA was 3.01 × 10−4 Ω·cm when the content of the AgNWs-AgNPs-GN hybrid nanomaterial was 0.8 wt %.

  2. Developmental condition and technical problems on electric insulation for super-conducting electric power machine

    Science.gov (United States)

    Motoyama, H.

    1989-05-01

    The present situations of superconducting electric power machines in the world and studied problems were investigated from viewpoint of the electric insulation. 50MVA generator (CRIE/Hitachi) or 120MVA generator (KWU/Siemens) where the dc superconducting technique was applied on field windings, are developed. As to Superconducting transformer, 220KVA transformer is trially manufactured and the conceptual design of 1,000MVA transformer is made by W.H. or Alstom. Future problems are the study of protecting method for the overvoltage to superconducting electric power machines and the study to prevent the quench for superconducting windings. The respective insulating characteristics of solid and liquid insulators become clear gradually under the cryogenic condition but a large part of insulating characteristics of composite insulator prepared by combination of both insulators are not clear, so that these problems must be clarified.

  3. Single flexible nanofiber to achieve simultaneous photoluminescence-electrical conductivity bifunctionality.

    Science.gov (United States)

    Sheng, Shujuan; Ma, Qianli; Dong, Xiangting; Lv, Nan; Wang, Jinxian; Yu, Wensheng; Liu, Guixia

    2015-02-01

    In order to develop new-type multifunctional composite nanofibers, Eu(BA)3 phen/PANI/PVP bifunctional composite nanofibers with simultaneous photoluminescence and electrical conductivity have been successfully fabricated via electrospinning technology. Polyvinyl pyrrolidone (PVP) is used as a matrix to construct composite nanofibers containing different amounts of Eu(BA)3 phen and polyaniline (PANI). X-Ray diffractometry (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), vibrating sample magnetometry (VSM), fluorescence spectroscopy and a Hall effect measurement system are used to characterize the morphology and properties of the composite nanofibers. The results indicate that the bifunctional composite nanofibers simultaneously possess excellent photoluminescence and electrical conductivity. Fluorescence emission peaks of Eu(3+) ions are observed in the Eu(BA)3 phen/PANI/PVP photoluminescence-electrical conductivity bifunctional composite nanofibers. The electrical conductivity reaches up to the order of 10(-3)  S/cm. The luminescent intensity and electrical conductivity of the composite nanofibers can be tuned by adjusting the amounts of Eu(BA)3 phen and PANI. The obtained photoluminescence-electrical conductivity bifunctional composite nanofibers are expected to possess many potential applications in areas such as microwave absorption, molecular electronics, biomedicine and future nanomechanics. More importantly, the design concept and construction technique are of universal significance to fabricate other bifunctional one-dimensional naonomaterials.

  4. Electrical stimulation of nerve cells using conductive nanofibrous scaffolds for nerve tissue engineering.

    Science.gov (United States)

    Ghasemi-Mobarakeh, Laleh; Prabhakaran, Molamma P; Morshed, Mohammad; Nasr-Esfahani, Mohammad Hossein; Ramakrishna, Seeram

    2009-11-01

    Fabrication of scaffolds with suitable chemical, mechanical, and electrical properties is critical for the success of nerve tissue engineering. Electrical stimulation was directly applied to electrospun conductive nanofibrous scaffolds to enhance the nerve regeneration process. In the present study, electrospun conductive nanofibers were prepared by mixing 10 and 15 wt% doped polyaniline (PANI) with poly (epsilon-caprolactone)/gelatin (PG) (70:30) solution (PANI/PG) by electrospinning. The fiber diameter, pore size, hydrophilicity, tensile properties, conductivity, Fourier transform infrared (FTIR), and X-ray photoelectron spectroscopy spectra of nanofibers were determined, and the in vitro biodegradability of the different nanofibrous scaffolds was also evaluated. Nanofibrous scaffolds containing 15% PANI was found to exhibit the most balanced properties to meet all the required specifications for electrical stimulation for its enhanced conductivity and is used for in vitro culture and electrical stimulation of nerve stem cells. 3-(4,5-dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenyl)-2H-tetrazolium (MTS) assay and scanning electron microscopy results showed that conductive nanofibrous scaffolds are suitable substrates for the attachment and proliferation of nerve stem cells. Electrical stimulation through conductive nanofibrous PANI/PG scaffolds showed enhanced cell proliferation and neurite outgrowth compared to the PANI/PG scaffolds that were not subjected to electrical stimulation.

  5. Experimental and numerical investigation of the effective electrical conductivity of nitrogen-doped graphene nanofluids

    Energy Technology Data Exchange (ETDEWEB)

    Mehrali, Mohammad, E-mail: mohamad.mehrali@siswa.um.edu.my [University of Malaya, Department of Mechanical Engineering and Advanced Material Research Centre (Malaysia); Sadeghinezhad, Emad, E-mail: esn802001@yahoo.com [University of Malaya, Department of Mechanical Engineering (Malaysia); Rashidi, Mohammad Mehdi [Tongji University, Shanghai Automotive Wind Tunnel Center (China); Akhiani, Amir Reza; Tahan Latibari, Sara; Mehrali, Mehdi; Metselaar, Hendrik Simon Cornelis [University of Malaya, Department of Mechanical Engineering and Advanced Material Research Centre (Malaysia)

    2015-06-15

    Electrical conductivity is an important property for technological applications of nanofluids that have not been widely investigated, and few studies have been concerned about the electrical conductivity. In this study, nitrogen-doped graphene (NDG) nanofluids were prepared using the two-step method in an aqueous solution of 0.025 wt% Triton X-100 as a surfactant at several concentrations (0.01, 0.02, 0.04, 0.06 wt%). The electrical conductivity of the aqueous NDG nanofluids showed a linear dependence on the concentration and increased up to 1814.96 % for a loading of 0.06 wt% NDG nanosheet. From the experimental data, empirical models were developed to express the electrical conductivity as functions of temperature and concentration. It was observed that increasing the temperature has much greater effect on electrical conductivity enhancement than increasing the NDG nanosheet loading. Additionally, by considering the electrophoresis of the NDG nanosheets, a straightforward electrical conductivity model is established to modulate and understand the experimental results.

  6. Hysteresis in the relation between moisture uptake and electrical conductivity in neat epoxy

    KAUST Repository

    Lubineau, Gilles

    2017-05-11

    Monitoring changes in electrical conductivity is a simple way to assess the water uptake from environmental moisture in polymers. However, the relation between water uptake and changes in conductivity is not fully understood. We monitored changes in the electrical volume conductivity of an anhydride-cured epoxy polymer during moisture sorption-desorption experiments. Gravimetric analysis showed that the polymer exhibits a two-stage sorption behavior resulting from the competition between diffusive and reactive mechanisms. As expected, the macroscopic electrical conductivity increases with the diffusion of water. However, our most surprising observation was severe hysteresis in the relation between water uptake and electrical conductivity during the sorption and desorption experiments. This indicates that change in the electrical conductivity depends on both the water uptake and the competition between the diffusive and reactive mechanisms. We studied samples with various thicknesses to determine the relative effects of the diffusive and reactive mechanisms. This is an important observation as it means that general electrical monitoring techniques should be used cautiously when it comes to measuring the moisture content of polymer or polymer-based composite samples.

  7. Electrical conduction mechanism in bulk ceramic insulators at high voltages until dielectric breakdown

    Science.gov (United States)

    Neusel, C.; Jelitto, H.; Schneider, G. A.

    2015-04-01

    In order to develop and verify a dielectric breakdown model for bulk insulators thicker than 100 μm, the knowledge of the dominating conduction mechanism at high electric fields, or respectively voltages, is necessary. The dielectric breakdown is the electrical failure of an insulator. In some existing breakdown models, ohmic conduction is assumed as dominating conduction mechanism. For verification, the dominating dc conduction mechanism of bulk insulators at room temperature was investigated by applying high voltages up to 70 kV to the insulator until dielectric breakdown occurs. Four conduction models, namely, ohmic, space charge limited, Schottky, and Poole-Frenkel conduction, were employed to identify the dominating conduction mechanism. Comparing the calculated permittivities from the Schottky and Poole-Frenkel coefficients with experimentally measured permittivity, Schottky and Poole-Frenkel conduction can be excluded as dominating conduction mechanism. Based on the current density voltage characteristics (J-V-curve) and the thickness-dependence of the current density, space charge limited conduction (SCLC) was identified to be the dominating conduction mechanism at high voltages leading to dielectric breakdown. As a consequence, breakdown models based on ohmic conduction are not appropriate to explain the breakdown of the investigated bulk insulators. Furthermore, the electrical failure of the examined bulk insulators can only be described correctly by a breakdown model which includes SCLC as conduction mechanism.

  8. Dehydration of chlorite explains anomalously high electrical conductivity in the mantle wedges.

    Science.gov (United States)

    Manthilake, Geeth; Bolfan-Casanova, Nathalie; Novella, Davide; Mookherjee, Mainak; Andrault, Denis

    2016-05-01

    Mantle wedge regions in subduction zone settings show anomalously high electrical conductivity (~1 S/m) that has often been attributed to the presence of aqueous fluids released by slab dehydration. Laboratory-based measurements of the electrical conductivity of hydrous phases and aqueous fluids are significantly lower and cannot readily explain the geophysically observed anomalously high electrical conductivity. The released aqueous fluid also rehydrates the mantle wedge and stabilizes a suite of hydrous phases, including serpentine and chlorite. In this present study, we have measured the electrical conductivity of a natural chlorite at pressures and temperatures relevant for the subduction zone setting. In our experiment, we observe two distinct conductivity enhancements when chlorite is heated to temperatures beyond its thermodynamic stability field. The initial increase in electrical conductivity to ~3 × 10(-3) S/m can be attributed to chlorite dehydration and the release of aqueous fluids. This is followed by a unique, subsequent enhancement of electrical conductivity of up to 7 × 10(-1) S/m. This is related to the growth of an interconnected network of a highly conductive and chemically impure magnetite mineral phase. Thus, the dehydration of chlorite and associated processes are likely to be crucial in explaining the anomalously high electrical conductivity observed in mantle wedges. Chlorite dehydration in the mantle wedge provides an additional source of aqueous fluid above the slab and could also be responsible for the fixed depth (120 ± 40 km) of melting at the top of the subducting slab beneath the subduction-related volcanic arc front.

  9. Effect of Metal Oxide on Electrical Resistivity of Conductive Wood Charcoal

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    To analyze the effect of metal oxide on electrical resistivity of conductive wood charcoal,wood powder of Masson pine was mixed with ferric oxide (Fe_2O_3) and nickel oxide (NiO), respectively,and then the mixed powders were carbonized at high temperature in a laboratory-scale tube furnace in a nitrogen atmosphere. DCY-3 resistivity tester was used to measure electrical resistivity of conductive wood charcoal. When carbonization temperature was 1200 ℃, the electrical resistivity of controlsamples, Fe_2O_3 (...

  10. High-performance electrically conductive silver paste prepared by silver-containing precursor

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Jianguo; Cao, Yu; Li, Xiangyou; Wang, Xiaoye; Zeng, Xiaoyan [Huazhong University of Science and Technology, Wuhan National Laboratory for Optoelectronics, College of Optoelectronics Science and Engineering, Wuhan (China)

    2010-09-15

    A high-performance electrically conductive silver paste with no solid particles before drying and/or sintering is developed, in which silver-containing precursor is employed as conductive functional phase. Thermogravimetry analysis, volume electrical resistivity tests and sintering experiments show that the paste with about 14 wt.% silver pristine content is able to achieve the volume electrical resistivity of (2-3) x 10{sup -5} {omega} cm after it is sintered at 220 C. A micro-pen direct-writing process indicates that it is very suitable for the fabrication of high-resolution (25 {mu}m) and high-integration devices and apparatus. (orig.)

  11. High-performance electrically conductive silver paste prepared by silver-containing precursor

    Science.gov (United States)

    Liu, Jianguo; Cao, Yu; Li, Xiangyou; Wang, Xiaoye; Zeng, Xiaoyan

    2010-09-01

    A high-performance electrically conductive silver paste with no solid particles before drying and/or sintering is developed, in which silver-containing precursor is employed as conductive functional phase. Thermogravimetry analysis, volume electrical resistivity tests and sintering experiments show that the paste with about 14 wt.% silver pristine content is able to achieve the volume electrical resistivity of (2-3) ×10-5 Ω cm after it is sintered at 220°C. A micro-pen direct-writing process indicates that it is very suitable for the fabrication of high-resolution (25 μm) and high-integration devices and apparatus.

  12. Effects of annealing process on electrical conductivity and mechanical property of Cu-Te alloys

    Institute of Scientific and Technical Information of China (English)

    ZHU Da-chuan; TANG Ke; SONG Ming-zhao; TU Ming-jing

    2006-01-01

    The effects of annealing process on the electrical conductivity and mechanical properties of Cu-Te alloys were studied via AG-10TA electronic universal machine, SB2230 digital electric bridge, SEM and EDS. The results show that recrystallization and precipitation occur simultaneously during the annealing process of Cu-Te alloys. Tellurium precipitates as Cu2Te second phase. The grain size increases with the increasing of annealing temperature and time. The electrical conductivity increases monotonously. The tensile strength of Cu-Te alloy is higher than that of pure copper.

  13. A Novel Method for Measuring Electrical Conductivity of High Insulating Oil Using Charge Decay

    Science.gov (United States)

    Wang, Z. Q.; Qi, P.; Wang, D. S.; Wang, Y. D.; Zhou, W.

    2016-05-01

    For the high insulating oil, it is difficult to measure the conductivity precisely using voltammetry method. A high-precision measurementis proposed for measuring bulk electrical conductivity of high insulating oils (about 10-9--10-15S/m) using charge decay. The oil is insulated and charged firstly, and then grounded fully. During the experimental procedure, charge decay is observed to show an exponential law according to "Ohm" theory. The data of time dependence of charge density is automatically recorded using an ADAS and a computer. Relaxation time constant is fitted from the data using Gnuplot software. The electrical conductivity is calculated using relaxation time constant and dielectric permittivity. Charge density is substituted by electric potential, considering charge density is difficult to measure. The conductivity of five kinds of oils is measured. Using this method, the conductivity of diesel oil is easily measured to beas low as 0.961 pS/m, as shown in Fig. 5.

  14. Field and temperature dependence of the small polaron hopping electrical conductivity in 1D disordered systems

    Energy Technology Data Exchange (ETDEWEB)

    Triberis, G P; Dimakogianni, M, E-mail: gtriber@phys.uoa.g [Solid State Section, Physics Department, University of Athens, Panepistimiopolis, 15784 Zografos, Athens (Greece)

    2009-09-23

    We investigate the effect of the electric field and the temperature on the electrical conductivity of one-dimensional disordered systems due to phonon assisted hopping of small polarons. The microscopic transport mechanism is treated within the framework of the generalized molecular crystal model and the Kubo formula, while percolation theoretical arguments lead to analytical expressions for the macroscopic behavior of the electrical conductivity at high (multi-phonon assisted hopping) and low (few-phonon assisted hopping) temperatures under the influence of moderate electric fields. The theoretical results are successfully applied to recent experimental findings for a wide temperature range and from low up to moderate electric fields. Comparison is made with other theories.

  15. Laboratory device to analyse the impact of soil properties on electrical and thermal conductivity

    Science.gov (United States)

    Bertermann, David; Schwarz, Hans

    2017-04-01

    Gathering information about soil properties in an efficient way is essential for many soil applications also for very shallow geothermal systems (e.g. collector systems or heat baskets). In the field, electrical resistivity tomogramphy measurements enable non-invasive and extensive analyses regarding the determination of soil properties. For a better understanding of measured electrical resistivity values in relation to soil properties within this study, a laboratory setup was developed. The structure of this laboratory setup is geared to gather electrical resistivity or rather electrical conductivity values which are directly comparable to data measured in the field. Within this setup grain size distribution, moisture content, and bulk density, which are the most important soil parameters affecting the electrical resistivity, can be adjusted. In terms of a better estimation of the geothermal capability of soil, thermal conductivity measurements were also implemented within the laboratory test sequence. The generated data reveals the serious influence of the water content and also provides a huge impact of the bulk density on the electrical as well as on the thermal conductivity. Furthermore, different behaviour patterns of electrical and thermal conductivity in their particular relation to the different soil parameters could be identified.

  16. Estimates of olivine-basaltic melt electrical conductivity using a digital rock physics approach

    Science.gov (United States)

    Miller, Kevin J.; Montési, Laurent G. J.; Zhu, Wen-lu

    2015-12-01

    Estimates of melt content beneath fast-spreading mid-ocean ridges inferred from magnetotelluric tomography (MT) vary between 0.01 and 0.10. Much of this variation may stem from a lack of understanding of how the grain-scale melt geometry influences the bulk electrical conductivity of a partially molten rock, especially at low melt fraction. We compute bulk electrical conductivity of olivine-basalt aggregates over 0.02 to 0.20 melt fraction by simulating electric current in experimentally obtained partially molten geometries. Olivine-basalt aggregates were synthesized by hot-pressing San Carlos olivine and high-alumina basalt in a solid-medium piston-cylinder apparatus. Run conditions for experimental charges were 1.5 GPa and 1350 °C. Upon completion, charges were quenched and cored. Samples were imaged using synchrotron X-ray micro-computed tomography (μ-CT). The resulting high-resolution, 3-dimensional (3-D) image of the melt distribution constitutes a digital rock sample, on which numerical simulations were conducted to estimate material properties. To compute bulk electrical conductivity, we simulated a direct current measurement by solving the current continuity equation, assuming electrical conductivities for olivine and melt. An application of Ohm's Law yields the bulk electrical conductivity of the partially molten region. The bulk electrical conductivity values for nominally dry materials follow a power-law relationship σbulk = Cσmeltϕm with fit parameters m = 1.3 ± 0.3 and C = 0.66 ± 0.06. Laminar fluid flow simulations were conducted on the same partially molten geometries to obtain permeability, and the respective pathways for electrical current and fluid flow over the same melt geometry were compared. Our results indicate that the pathways for flow fluid are different from those for electric current. Electrical tortuosity is lower than fluid flow tortuosity. The simulation results are compared to existing experimental data, and the potential

  17. Electrical Impedance Spectroscopy for Electro-Mechanical Characterization of Conductive Fabrics

    Directory of Open Access Journals (Sweden)

    Tushar Kanti Bera

    2014-06-01

    Full Text Available When we use a conductive fabric as a pressure sensor, it is necessary to quantitatively understand its electromechanical property related with the applied pressure. We investigated electromechanical properties of three different conductive fabrics using the electrical impedance spectroscopy (EIS. We found that their electrical impedance spectra depend not only on the electrical properties of the conductive yarns, but also on their weaving structures. When we apply a mechanical tension or compression, there occur structural deformations in the conductive fabrics altering their apparent electrical impedance spectra. For a stretchable conductive fabric, the impedance magnitude increased or decreased under tension or compression, respectively. For an almost non-stretchable conductive fabric, both tension and compression resulted in decreased impedance values since the applied tension failed to elongate the fabric. To measure both tension and compression separately, it is desirable to use a stretchable conductive fabric. For any conductive fabric chosen as a pressure-sensing material, its resistivity under no loading conditions must be carefully chosen since it determines a measurable range of the impedance values subject to different amounts of loadings. We suggest the EIS method to characterize the electromechanical property of a conductive fabric in designing a thin and flexible fabric pressure sensor.

  18. Dual percolation behaviors of electrical and thermal conductivity in metal-ceramic composites

    Science.gov (United States)

    Sun, K.; Zhang, Z. D.; Qian, L.; Dang, F.; Zhang, X. H.; Fan, R. H.

    2016-02-01

    The thermal and electrical properties including the permittivity spectra in radio frequency region were investigated for copper/yttrium iron garnet (Cu/YIG) composites. Interestingly, the percolation behaviors in electrical and thermal conductivity were obtained due to the formation of copper particles' networks. Beyond the electrical percolation threshold, negative permittivity was observed and plasmon frequency was reduced by several orders of magnitude. With the increase in copper content, the thermal conductivity was gradually increased; meanwhile, the phonon scattering effect and thermal resistance get enhanced, so the rate of increase in thermal conductivity gradually slows down. Hopefully, Cu/YIG composites with tunable electrical and thermal properties have great potentials for electromagnetic interference shielding and electromagnetic wave attenuation.

  19. Dual percolation behaviors of electrical and thermal conductivity in metal-ceramic composites

    Energy Technology Data Exchange (ETDEWEB)

    Sun, K.; Zhang, Z. D.; Qian, L.; Dang, F.; Zhang, X. H., E-mail: zhangxh@sdu.edu.cn, E-mail: fan@sdu.edu.cn; Fan, R. H., E-mail: zhangxh@sdu.edu.cn, E-mail: fan@sdu.edu.cn [Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials (Ministry of Education), Shandong University, Jinan 250061 (China)

    2016-02-08

    The thermal and electrical properties including the permittivity spectra in radio frequency region were investigated for copper/yttrium iron garnet (Cu/YIG) composites. Interestingly, the percolation behaviors in electrical and thermal conductivity were obtained due to the formation of copper particles' networks. Beyond the electrical percolation threshold, negative permittivity was observed and plasmon frequency was reduced by several orders of magnitude. With the increase in copper content, the thermal conductivity was gradually increased; meanwhile, the phonon scattering effect and thermal resistance get enhanced, so the rate of increase in thermal conductivity gradually slows down. Hopefully, Cu/YIG composites with tunable electrical and thermal properties have great potentials for electromagnetic interference shielding and electromagnetic wave attenuation.

  20. Electrical conductivity of mantle clinopyroxene as a function of water content and its implication on electrical structure of uppermost mantle

    Science.gov (United States)

    Zhao, Chengcheng; Yoshino, Takashi

    2016-08-01

    The electrical conductivity of San Carlos clinopyroxene aggregates with various water contents were measured under Ni-NiO buffer at 1.5 GPa and 600-1200 K in a DIA-type apparatus. The conductivity increases with increasing water content in clinopyroxene. Hidden conduction mechanism was detected because of the much smaller iron content in clinopyroxene, which was usually covered by small polaron conduction in other nominally anhydrous minerals. The identified activation enthalpies ranged from 0.70-0.75 eV to 1.23-1.37 eV. Our result reveals that the dominant charge-carrying species in electrical conductivity could change with temperature and water content. At high temperatures relevant to asthenospheric condition, activation enthalpy for the conductivity agrees well with that for the hydrogen self-diffusion. The dominant charge carrier therefore might be M site vacancy. However, contrary to previous view that all hydrogens contribute to increasing conductivity equally, our result shows that only a limited amount (20%-40%) of hydrogen acts as effective charge carrier in clinopyroxene. On the other hand, the activation enthalpy for the conductivity at low temperatures is significantly lower than that for the hydrogen self-diffusion, similar to what has been observed in olivine and orthopyroxene. This type of conduction is probably caused by fast diffusion of specific hydrogen or fast hydrogen grain boundary diffusion. At low temperatures, the proton conduction of clinopyroxene is nearly one order and two orders of magnitude lower than those of olivine and orthopyroxene, respectively, and tends to converge at high temperatures. Using the present data combined with conductivity of olivine and orthopyroxene, a laboratory-based conductivity-depth profile in the uppermost mantle shows that hydrous clinopyroxene cannot account for the high conductive regions observed beneath the ocean floor near Eastern Pacific Rise. The presence of partial melt would be unavoidable.

  1. Electrical conductivity measurements in sewage sludge pellets: innovative techniques for environmental management.

    Science.gov (United States)

    Camilla, S; Jordan, M M

    2009-09-15

    This paper presents research on the behaviour of electrical conductivity of sludge pellets resulting from the treatment of urban wastewater at the drying grounds of the El Trebal wastewater processing plant, located in the Mapocho river basin of the Metropolitana Region, Santiago, Chile. In the methodology used samples were taken that correspond to three horizons of the sewage sludge pile. The first horizon made up the upper portion of the pile (the surface), the second the central portion (mesophilous), and the third the lower one (thermophilous). Electrical conductivity measurements were taken in sewage sludge pellets under pressures on the order of 15-50 MPa with currents of 10(-15)A. Electrical conductivity measurements were also taken for different horizons, and innovative techniques and methodologies for sludge samples presented in the form of pellets are used for this purpose. Such pellets are easily reproduced with sufficient precision, and at the same time allow modifying other variables like mass, sample dimensions and compaction levels. The trends of the conductivity curves are similar for the sludge from the isolation surface horizon (H1) as well as for the mesophilous area horizon (H2). In the case of the thermophilous area horizon (H3), the electrical conductivity shows extremely high values when compared to horizons H1 and H2. This paper could be useful in establishing a general rule for taking electrical conductivity measurements in sewage sludge samples. Such a rule could bring accurate reproducible values, and be used for other types of dry wastes.

  2. On the dielectric relaxation of biological cell suspensions: the effect of the membrane electrical conductivity.

    Science.gov (United States)

    Di Biasio, A; Cametti, C

    2011-06-01

    Due to the mismatch of the electrical parameters (the permittivity ϵ' and the electrical conductivity σ) of the membrane of a biological cell with the ones of the cytosol and the extracellular medium, biological cell suspensions are the site, under the influence of an external electric field, of large dielectric relaxations in the radiowave frequency range. However, a point still remains controversial, i.e., whether or not the value of membrane conductivity σ(s) might be extracted from the de-convolution of the dielectric spectra or otherwise if it would be more reasonable to assign to the membrane conductivity a value equal to zero. This point is not to be considered with superficiality since it concerns an a priori choice which ultimately influences the values of the electrical parameters deduced from this technique. As far as this point is concerned, the opinion of the researchers in this field diverges. We believe that, at least within certain limits, the membrane conductivity can be deduced from the shape of the relaxation spectra. We substantiate this thesis with two different examples concerning the first a suspension of human normal erythrocyte cells and the second a suspension of human lymphocyte cells. In both cases, by means of an accurate fitting procedure based on the Levenberg-Marquardt method for complex functions, we can evaluate the membrane conductivity σ(s) with its associated uncertainty. The knowledge of the membrane electrical conductivity will favor the investigation of different ion transport mechanisms across the cell membrane.

  3. Column displacement experiments to evaluate electrical conductivity effects on electromagnetic soil water sensing

    Science.gov (United States)

    Bulk electrical conductivity (EC) in superactive soils has been shown to strongly influence electromagnetic sensing of permittivity. However, these effects are dependent on soil water content and temperature as well as the pore water conductivity. We carried out isothermal column displacement experi...

  4. Thermoelectric power and electrical conductivity of strontium-doped lanthanum manganite

    DEFF Research Database (Denmark)

    Ahlgren, E.O.; Poulsen, F.W.

    1996-01-01

    Thermoelectric power and electrical conductivity of pure and 5, 10 and 20% strontium-doped lanthanum manganite are determined as function of temperature in air and of P-O2 at 1000 degrees C. At high temperatures the thermoelectric power is negative. Both thermoelectric power and conductivity...

  5. Mapping of GeSbTe Thin Film Electrical Properties with Conductive AFM

    Science.gov (United States)

    Brocious, Jordan; Inglefield, Colin; Bobela, David; Herring, Thomas; Taylor, P. Craig

    2007-10-01

    The phase-change material system GeSbTe (GST) is currently used for optical data storage, however many details of the mechanism governing the phase change are not understood. GST's optical properties and electrical conductivities differ between the amorphous and crystalline phases. For instance, the electrical conductivity in the amorphous phase can be ˜10^3 times smaller than electrical conductivity in the crystalline phase. Thin films of Ge2Sb2Te5 and other alloys were created by a RF sputtering technique, which is known to produce amorphous samples. Crystalline regions were created after growth by localized laser heating. We characterized these films with Conductive Atomic Force Microscopy, which provides physical and electrical topography images. From this characterization we have identified sparse ˜100 nm highly conductive regions in the overall low-conductivity amorphous material. Although the laser treatment does not result in a uniformly conductive film, conductive regions in the treated material are significantly denser and larger.

  6. Laboratory monitoring of CO2 migration and phase transition using complex electrical conductivity

    NARCIS (Netherlands)

    Kirichek, O.; Ghose, R.; Heller, H.K.J.

    2013-01-01

    We explore a new monitoring technique for the CO2 front propagation and phase transition processes using complex electrical conductivity measurements. A laboratory facility has been built to conduct coreflood experiments under reservoir conditions. CO2 is injected in both dry and brine-saturated res

  7. Electrical conductivity and thermal behavior of solid electrolytes based on alkali carbonates and sulfates

    NARCIS (Netherlands)

    Brosda, S.; Bouwmeester, Henricus J.M.; Guth, U.

    1997-01-01

    Both thermal stability and electrical conductivity of alkali ion conducting Na2CO3 and Na2SO4, were improved by adding alkaline earth carbonates and sulfates, respectively, as well as insulating materials like ¿-Al2O3. The admixing of divalent compounds causes two effects. First a more or less

  8. Correlation of electrical resistivity imaging, push-tool and groundwater electrical conductivity at a heterogeneous field site

    Energy Technology Data Exchange (ETDEWEB)

    Rayner, S.F.; Bentley, L.R.; Robillard, J.M. [Calgary Univ., AB (Canada)

    2003-07-01

    This paper describes the collection of data at a decommissioned sour gas plant, located on a topographic high in central Alberta. The information collected included: push-tool electrical conductivity (EC), three-dimensional electrical resistivity imaging (3D-ERI) and groundwater sample electrical conductivity. There was no correlation between the inverted ERI conductivity values and groundwater EC values, despite the existence of strong correlation between the inverted ERI conductivity values and upscaled push-tool EC. The most probable cause for the lack of correlation between the ERI and groundwater EC values is subsurface heterogeneity. There is a possibility that the EC of the mobile groundwater within the fractures and sand lenses are different than that of the relatively immobile matrix pore water, due to remediation activities. The entrance of the groundwater from piezometers is from high permeability zones (like sand lenses and fractures) within the screened interval. The ERI data mostly likely does not specifically identify the conductivity of the groundwater within these fractures and thin sand lenses. As a result, the manner in which ERI and groundwater data are interpreted in terms of subsurface geochemistry is affected. 4 refs., 4 figs.

  9. Carbon nanotubes with silver nanoparticle decoration and conductive polymer coating for improving the electrical conductivity of polycarbonate composites

    KAUST Repository

    Patole, Archana S.

    2015-01-01

    We proposed a strategy to enhance the conductivity of polycarbonate by using three-phase hybrid metallic/non-metallic fillers. Ethylene diamine (EDA) functionalized multiwalled carbon nanotubes (MWCNT-EDA) are first decorated with silver nanoparticles. These Ag/ MWCNT-EDA fillers are then coated with a conductive layer of ethylene glycol treated PEDOT: PSS (poly [3,4-ethylenedioxythiophene]: poly [styrenesulfonate]) (EP). In such an approach, the MWCNT backbone is covered by a highly conductive coating made of Ag nanoparticles surrounded by EP. To understand how Ag and EP form a highly conductive coating, the effect of different wt% of Ag nanoparticles on EP was studied. Ag nanoparticles around the size of 128 ± 28 nmeffectively lowered the volume resistivity of bulk EP, resulting in a highly conducting Ag/EP blend. We found that in the final Ag/MWCNT-EDA/EP assembly, the EP coating enhances the electrical conductivity in two ways: (1) it is an efficient dispersing agent that helps in achieving a uniform dispersion of the Ag/MWCNT-EDA and (2) it acts as a conductive bridge between particles (Ag and MWCNT-EDA), reducing the particle to particle resistivity. When inserted into polycarbonate, this three-phase blend successfully reduced the volume resistivity of the polymer by two orders of magnitude compared with previous approaches.

  10. Giant electric conductivity in CuO-Cu interface and its HTSC-like temperature changes

    CERN Document Server

    Osipov, V V; Naumov, S V

    2001-01-01

    The temperature dependences of the electric conductivity and volt-ampere characteristics (VAC) of the samples, representing the CuO monocrystals, the natural facets whereof are coated with the Cu film, are studied. It is shown that the electric conductivity, related to the Cu films, after electro-chemical or thermal annealing grows multiply up to 1.5 x 10 sup 5 times as compared to the Cu control films on the devitrified glass. The obtained results are explained by formation of the high-conductivity interface layer between CuO and Cu. It is supposed that the giant electric conductivity, its HTSC-like change with the temperature and VAC nonlinearity may be conditioned by formation of superconducting areas with critical temperatures, essentially exceeding 400 K

  11. Understanding Electrical Conduction States in WO3 Thin Films Applied for Resistive Random-Access Memory

    Science.gov (United States)

    Ta, Thi Kieu Hanh; Pham, Kim Ngoc; Dao, Thi Bang Tam; Tran, Dai Lam; Phan, Bach Thang

    2016-05-01

    The electrical conduction and associated resistance switching mechanism of top electrode/WO3/bottom electrode devices [top electrode (TE): Ag, Ti; bottom electrode (BE): Pt, fluorine-doped tin oxide] have been investigated. The direction of switching and switching ability depended on both the top and bottom electrode material. Multiple electrical conduction mechanisms control the leakage current of such switching devices, including trap-controlled space-charge, ballistic, Ohmic, and Fowler-Nordheim tunneling effects. The transition between electrical conduction states is also linked to the switching (SET-RESET) process. This is the first report of ballistic conduction in research into resistive random-access memory. The associated resistive switching mechanisms are also discussed.

  12. Linear Regression Model of the Ash Mass Fraction and Electrical Conductivity for Slovenian Honey

    Directory of Open Access Journals (Sweden)

    Mojca Jamnik

    2008-01-01

    Full Text Available Mass fraction of ash is a quality criterion for determining the botanical origin of honey. At present, this parameter is generally being replaced by the measurement of electrical conductivity (κ. The value κ depends on the ash and acid content of honey; the higher their content, the higher the resulting conductivity. A linear regression model for the relationship between ash and electrical conductivity has been established for Slovenian honey by analysing 290 samples of Slovenian honey (including acacia, lime, chestnut, spruce, fir, multifloral and mixed forest honeydew honey. The obtained model differs from the one proposed by the International Honey Commission (IHC in the slope, but not in the section part of the relation formula. Therefore, the Slovenian model is recommended when calculating the ash mass fraction from the results of electrical conductivity in samples of Slovenian honey.

  13. Electromagnetic fields with electric and chiral magnetic conductivities in heavy ion collisions

    Science.gov (United States)

    Li, Hui; Sheng, Xin-li; Wang, Qun

    2016-10-01

    We derive an analytic formula for electric and magnetic fields produced by a moving charged particle in a conducting medium with the electric conductivity σ and the chiral magnetic conductivity σχ. We use the Green's function method and assume that σχ is much smaller than σ . The compact algebraic expressions for electric and magnetic fields without any integrals are obtained. They recover the Lienard-Wiechert formula at vanishing conductivities. Exact numerical solutions are also found for any values of σ and σχ and are compared with analytic results. Both numerical and analytic results agree very well for the scale of high-energy heavy ion collisions. The spacetime profiles of electromagnetic fields in noncentral Au+Au collisions have been calculated based on these analytic formula as well as exact numerical solutions.

  14. Electromagnetic fields with electric and chiral magnetic conductivities in heavy ion collisions

    CERN Document Server

    Li, Hui; Wang, Qun

    2016-01-01

    We derive analytic formula for electric and magnetic fields produced by a moving charged particle in a conducting medium with the electric conductivity \\sigma and the chiral magnetic conductivity \\sigma_{\\chi}. We use the Green function method and assume that \\sigma_{\\chi} is much smaller than \\sigma. The compact algebraic expressions for electric and magnetic fields without any integrals are obtained. They recover the Lienard-Wiechert formula at vanishing conductivities. Exact numerical solutions are also found for any values of \\sigma and \\sigma_{\\chi} and are compared to analytic results. Both numerical and analytic results agree very well for the scale of high energy heavy ion collisions. The space-time profiles of electromagnetic fields in non-central Au+Au collisions have been calculated based on these analytic formula as well as exact numerical solutions.

  15. Responses of atmospheric electric field and air-earth current to variations of conductivity profiles

    Science.gov (United States)

    Makino, M.; Ogawa, T.

    1984-05-01

    A global circuit model is constructed to study responses of air-earth current and electric field to a variation of atmospheric electrical conductivity profile. The model includes the orography and the global distribution of thunderstorm generators. The conductivity varies with latitude and exponentially with altitude. The thunderstorm cloud is assumed to be a current generator with a positive source at the top and a negative one at the bottom. The UT diurnal variations of the global current and the ionospheric potential are evaluated considering the local-time dependence of thunderstorm activity. The global distribution of the electric field and the air-earth current are affected by the orography and latitudinal effects. Assuming a variation of conductivity profile, responses of atmospheric electrical parameters are investigated. The nonuniform decrement of the conductivity with altitude increases both the electric field and the air-earth current. The result suggests a possibility that the increment of the electric field and the air-earth current after a solar flare may be caused by this scheme, due to Forbush decrease.

  16. A Chemically Polymerized Electrically Conducting Composite of Polypyrrole Nanoparticles and Polyurethane for Tissue Engineering

    Science.gov (United States)

    Broda, Christopher R.; Lee, Jae Y.; Sirivisoot, Sirinrath; Schmidt, Christine E.; Harrison, Benjamin S.

    2011-01-01

    A variety of cell types respond to electrical stimuli, accordingly many conducting polymers (CPs) have been used as tissue engineering (TE) scaffolds, one such CP is polypyrrole (PPy). PPy is a well studied biomaterial with potential TE applications due to its electrical conductivity and many other beneficial properties. Combining its characteristics with an elastomeric material, such as polyurethane (PU), may yield a hybrid scaffold with electrical activity and significant mechanical resilience. Pyrrole was in situ polymerized within a PU emulsion mixture in weight ratios of 1:100, 1:20, 1:10 and 1:5, respectively. Morphology, electrical conductivity, mechanical properties and cytocompatibility with C2C12 myoblast cells were characterized. The polymerization resulted in a composite with a principle base of PU interspersed with an electrically percolating network of PPy nanoparticles. As the mass ratio of PPy to PU increased so did electrical conductivity of the composites. In addition, as the mass ratio of PPy to PU increased, stiffness of the composite increased while maximum elongation length decreased. Ultimate tensile strength was reduced by approximately 47% across all samples with the addition of PPy to the PU base. Cytocompatibility assay data indicated no significant cytotoxic effect from the composites. Static cellular seeding of C2C12 cells and subsequent differentiation showed myotube formation on the composite materials. PMID:21681943

  17. Electrical conductivity of a silicone network upon electron irradiation: influence of formulation

    Science.gov (United States)

    Roggero, A.; Dantras, E.; Paulmier, T.; Tonon, C.; Lewandowski, S.; Dagras, S.; Payan, D.

    2016-12-01

    In this study, the electrical conductivity of a silicone elastomer filled with inorganic fillers was investigated upon electron irradiation. Neat samples consisting of the isolated polysiloxane matrix (with no fillers) were studied in parallel to identify the filler contribution to this evolution. It was shown that exposure to 400 keV electron doses induced a decrease in electrical conductivity for both the filled and neat materials. This decrease was much more pronounced with the filled samples than with the neat ones. Moreover, the activation energy of electrical conductivity (Arrhenius behaviour) doubled in the filled case, while it varied only weakly for the neat case. In light of these results, structure-property relationships were proposed on the basis of the radiation-induced crosslink processes to which this material is subject. In the framework of electronic percolation theory, it is suggested that the radiation-induced formation of SiO3 crosslinks in the polysiloxane network and SiO4 crosslinks at filler-matrix interfaces affects the percolation path of the material, which can be simply modelled by a network of resistors in series. On one hand, their densification increases the overall resistance of the percolation path, which results in the observed decrease of effective electrical conductivity. On the other hand, the steep increase in activation energy in the filled material attributes to the SiO4 crosslinks becoming the most restrictive barrier along the percolation path. In spite of the misleading likeness of electrical conductivities in the pristine state, this study presented evidence that silicone formulation can affect the evolution of electrical properties in radiative environments. To illustrate this conclusion, the use of this material in space applications, especially when directly exposed to the radiative space environment, was discussed. The decrease in electrical conductivity was associated with a progressively increasing risk for the

  18. Electrical conductance in a single wall carbon nanotube (SWCNT: tight binding model

    Directory of Open Access Journals (Sweden)

    T Mardaani

    2010-03-01

    Full Text Available In this study, we derive analytically Green’s function (GF formalism to calculate the electrical conductance for an armchair SWCNT in the ballistic regime. We obtain an exact analytical formula for the conductance of the SWCNT, in the tight-binding approach and assuming nearest-neighbor interaction by recursion process in the GF formalism. We show that in the presence of uniform external potential, the number of conductance channels and resonance energy range of the system decrease.

  19. Electrochemical Device Comprising an Electrically-Conductive, Selectively-Permeable Membrane

    Science.gov (United States)

    Mittelsteadt, Cortney K. (Inventor); Laicer, Castro S. T. (Inventor); Harrison, Katherine E. (Inventor); McPheeters, Bryn M. (Inventor)

    2017-01-01

    An electrochemical device, such as a fuel cell or an electrolyzer. In one embodiment, the electrochemical device includes a membrane electrode assembly (MEA), an anodic gas diffusion medium in contact with the anode of the MEA, a cathodic gas diffusion medium in contact with the cathode, a first bipolar plate in contact with the anodic gas diffusion medium, and a second bipolar plate in contact with the cathodic gas diffusion medium. Each of the bipolar plates includes an electrically-conductive, non-porous, liquid-permeable, substantially gas-impermeable membrane in contact with its respective gas diffusion medium, the membrane including a solid polymer electrolyte and a non-particulate, electrically-conductive material, such as carbon nanotubes, carbon nanofibers, and/or metal nanowires. In addition, each bipolar plate also includes an electrically-conductive fluid chamber in contact with the electrically-conductive, selectively-permeable membrane and further includes a non-porous and electrically-conductive plate in contact with the fluid chamber.

  20. Enhanced Electrical Conductivity due to Morphological Changes in Polyanaline-Titania Core-Shell Nanocomposites

    Science.gov (United States)

    Coates, Nelson; Liu, Jianfeng; Segalman, Rachel; Urban, Jeffrey

    2015-03-01

    Conducting polymer-inorganic nanoparticle composites are a valuable class of advanced materials with a wide range of applications due their extensive physical and chemical tunability. Although effective medium theories are often used to predict the behavior of these materials, the actual physical properties can be distinctly different from their constituents due to a variety of structural or electrical interfacial interactions that may manifest. Here, we present electrical conductivity data for TiO2 nanoparticles coated with polyanaline, along with structural characterization of the conducting polymer as a function of component volume fraction. For these composites, we find that the electrical conductivity cannot be explained by a 2-component effective medium theory, but rather is correlated to a structural change in the polymer. We hypothesize that the organic-inorganic interface induces a structural change in a region of polymer surrounding the nanoparticle which improves the electrical conductivity of the composite. These results emphasize the importance of controlling interfacial interactions in organic-inorganic composites, and demonstrate the potential for using such interactions as a way to tune electrical transport.

  1. Drag Forces, Neutral Wind and Electric Conductivity Changes in the Ionospheric E Region

    CERN Document Server

    Nenovski, Petko

    2014-01-01

    The neutrals in the Earth environment are in fact free and subjected to drag forces (by ions). In this study we show that drag or friction forces in the ionosphere-thermosphere system initiate changes in the plasma flow, neutral wind, and the conductivity, as well. Ions and electrons embedded in neutral wind field of velocity u acquire drifts perpendicular both to the initial neutral wind velocity and to the ambient magnetic field producing a perpendicular electric current. This perpendicular electric current is defined by a conductivity derived previously and the polarization electric field u x B. Self-consistently, the free neutrals acquires an additional neutral velocity component perpendicular to the initial neutral wind velocity u. The Pedersen and Hall currents wane within a specific time inversely proportional to neutral-ion collision frequency. These findings are relevant to a better understanding of electric current generation, distribution and closure in weakly ionized plasmas where charged particle...

  2. Effect of aligned carbon nanotubes on electrical conductivity behaviour in polycarbonate matrix

    Indian Academy of Sciences (India)

    M M Larijani; E J Khamse; Z Asadollahi; M Asadi

    2012-06-01

    This article reports effects of alignment of embedded carbon nanotubes in a polycarbonate polymer matrix under magnetic, direct and alternating current electric fields on the electrical properties of the resulting nanocomposites. Composites consisting of different quantities of carbon nanotubes in a polycarbonate matrix have been prepared using a solution casting technique. The effects of field strength and nanotube concentration on the resulted network structure and conductivity of the composites were studied by in situ optical microscopy, transmission electron microscopy and four-point probe technique. The results showed that the composites prepared in the presence of field had better conductivity than those of as-prepared composites. It was also concluded that the application of alternating current electric field and magnetic field in this system led to the formation of relatively continuing networks while direct current electric field only prevented agglomeration of the carbon nanotubes in the polycarbonate matrix and created relatively uniform distribution of nanotubes in the matrix.

  3. Electrical Properties of Photodiode Ba0.25Sr0.75TiO3 (BST Thin Film Doped with Ferric Oxide on p-type Si (100 Substrate using Chemical Solution Deposition Method

    Directory of Open Access Journals (Sweden)

    Irzaman

    2011-12-01

    Full Text Available In this paper we have grown pure Ba0.25Sr0.75TiO3 (BST and BST doped by Ferric Oxide Fe2O3 (BFST with doping variations of 5%, 10%, and 15% above type-p Silicon (100 substrate using the chemical solution deposition (CSD method with spin coating technique at rotation speed of 3000 rpm, for 30 seconds. BST thin film are made with a concentration of 1 M 2-methoxyethanol and annealing temperature of 850OC for the Si (100 substrate. Characterization of the thin film is performed for the electrical properties such as the current-voltage (I-V curve using Keithley model 2400 as well as dielectric constant, time constant, pyroelectric characteristics, and depth measurement. The results show that the thin film depth increases if the concentration of the Ferric Oxide doping increases. The I-V characterization shows that the BST and BFST thin film has photodiode properties. The dielectric constant increases with the addition of doping. The maximum dielectric constant value is obtained for 15 % doping concentration namely 83.1 for pure BST and 6.89, 11.1, 41.63 and 83.1, respectively for the Ferric Oxide doping based BST with concentration of 5%, 10%, and 15%. XRD spectra of 15 % of ferric oxide doped BST thin film tetragonal phase, we carried out the lattice constant were a = b = 4.203 Å; c = 4.214 Å; c/a ratio = 1.003

  4. Nanoscale electrical and mechanical characteristics of conductive polyaniline network in polymer composite films.

    Science.gov (United States)

    Jafarzadeh, Shadi; Claesson, Per M; Sundell, Per-Erik; Pan, Jinshan; Thormann, Esben

    2014-11-12

    The presence and characteristics of a connected network of polyaniline (PANI) within a composite coating based on polyester acrylate (PEA) has been investigated. The bulk electrical conductivity of the composite was measured by impedance spectroscopy. It was found that the composite films containing PANI have an electrical conductivity level in the range of semiconductors (order of 10(-3) S cm(-1)), which suggests the presence of a connected network of the conductive phase. The nanoscopic distribution of such a network within the cured film was characterized by PeakForce tunneling atomic force microscopy (AFM). This method simultaneously provides local information about surface topography and nanomechanical properties, together with electrical conductivity arising from conductive paths connecting the metallic substrate to the surface of the coating. The data demonstrates that a PEA-rich layer exists at the composite-air interface, which hinders the conductive phase to be fully detected at the surface layer. However, by exposing the internal structure of the composites using a microtome, a much higher population of a conductive network of PANI, with higher elastic modulus than the PEA matrix, was observed and characterized. Local current-voltage (I-V) spectroscopy was utilized to investigate the conduction mechanism within the nanocomposite films, and revealed non-Ohmic characteristics of the conductive network.

  5. Electrical conductivity as an indicator of iron reduction rates in abiotic and biotic systems

    Science.gov (United States)

    Regberg, Aaron; Singha, Kamini; Tien, Ming; Picardal, Flynn; Zheng, Quanxing; Schieber, Jurgen; Roden, Eric; Brantley, Susan L.

    2011-04-01

    Although changes in bulk electrical conductivity (σb) in aquifers have been attributed to microbial activity, σb has never been used to infer biogeochemical reaction rates quantitatively. To explore the use of electrical conductivity to measure reaction rates, we conducted iron oxide reduction experiments of increasing biological complexity. To quantify reaction rates, we propose composite reactions that incorporate the stoichiometry of five different types of reactions: redox, acid-base, sorption, dissolution/precipitation, and biosynthesis. In batch experiments and the early stages of a column experiment, such reaction stoichiometries inferred from a few chemical measurements allowed quantification of the Fe oxide reduction rate based on changes in electrical conductivity. The relationship between electrical conductivity and fluid chemistry did not hold during the latter stages of the column experiment when σb increased while fluid chemistry remained constant. Growth of an electrically conductive biofilm could possibly explain this late stage σb increase. The measured σb increase is consistent with a model proposed by analogy from percolation theory that attributes the increased conductivity to growth of biofilms with conductivity of ˜5.5 S m-1 in at least 3% of the column pore space. This work demonstrates that measurements of σb and flow rate, combined with a few direct chemical measurements, can be used to quantify biogeochemical reaction rates in controlled laboratory situations and may be able to detect the presence of biofilms. This approach may help in designing future field experiments to interpret biogeochemical reactivity from conductivity measurements.

  6. A study by electrical conductivity measurements of the semiconductive and redox properties of Nb-doped NiO catalysts in correlation with the oxidative dehydrogenation of ethane.

    Science.gov (United States)

    Popescu, Ionel; Skoufa, Zinovia; Heracleous, Eleni; Lemonidou, Angeliki; Marcu, Ioan-Cezar

    2015-03-28

    Nb-doped nickel oxides with Nb contents in the range from 1 to 20% and, for comparison, pure NiO, were characterized using in situ electrical conductivity measurements in correlation with their catalytic performances for the oxidative dehydrogenation (ODH) of ethane into ethylene. Their electrical conductivity was studied as a function of temperature and oxygen partial pressure and was followed with time during sequential exposures to air, ethane-air mixture (reaction mixture) and pure ethane in conditions similar to those of catalysis. All the oxides were p-type semiconductors under air. Their electrical conductivity in the reaction temperature range decreased in the following order: NiO > Nb(1)NiO > Nb(5)NiO > Nb(10)NiO > Nb(15)NiO > Nb(20)NiO. This correlates well with the catalytic activity expressed as the intrinsic rate of ethane consumption. All the catalysts were partially reduced under the reaction mixture in the reaction temperature range, an inverse correlation between their conductivity in these conditions and the ODH selectivity being observed. The ODH reaction of ethane takes place via a heterogeneous redox mechanism involving the surface lattice O(-) species.

  7. Study by electrical conductivity measurements of semiconductive and redox properties of M-doped NiO (M = Li, Mg, Al, Ga, Ti, Nb) catalysts for the oxidative dehydrogenation of ethane.

    Science.gov (United States)

    Popescu, Ionel; Heracleous, Eleni; Skoufa, Zinovia; Lemonidou, Angeliki; Marcu, Ioan-Cezar

    2014-03-14

    Pure and M-doped nickel oxides with M = Li, Mg, Al, Ga, Ti, Nb, catalysts for the oxidative dehydrogenation of ethane into ethylene, were characterized by in situ electrical conductivity measurements. Their electrical conductivity was studied as a function of temperature and oxygen partial pressure and was followed with time during sequential exposures to air, an ethane-air mixture (reaction mixture) and pure ethane under conditions similar to those of catalysis. All the materials appeared to be p-type semiconductors under air with positive holes as the main charge carriers and their electrical conductivity decreased in the following order: Li-NiO > NiO > Mg-NiO > Nb-NiO > Ga-NiO > Al-NiO > Ti-NiO. All the catalysts remained p-type semiconductors in the reaction mixture at 400 °C. Correlations between the p-type semiconductivity and the catalytic properties have been evidenced. The reaction mechanism involves surface lattice O(-) species and can be assimilated to a Mars and van Krevelen mechanism.

  8. Numerical Investigation of Entropy Generation in Unsteady MHD Generalized Couette Flow with Variable Electrical Conductivity

    Science.gov (United States)

    Chinyoka, T.; Makinde, O. D.

    2013-01-01

    The thermodynamic second law analysis is utilized to investigate the inherent irreversibility in an unsteady hydromagnetic generalized Couette flow with variable electrical conductivity in the presence of induced electric field. Based on some simplified assumption, the model nonlinear governing equations are obtained and solved numerically using semidiscretization finite difference techniques. Effects of various thermophysical parameters on the fluid velocity, temperature, current density, skin friction, the Nusselt number, entropy generation number, and the Bejan number are presented graphically and discussed quantitatively. PMID:23956691

  9. Wireless Sensing System Using Open-circuit, Electrically-conductive Spiral-trace Sensor

    Science.gov (United States)

    Woodard, Stanley E. (Inventor); Taylor, Bryant D. (Inventor)

    2013-01-01

    A wireless sensing system includes a sensor made from an electrical conductor shaped to form an open-circuit, electrically-conductive spiral trace having inductance and capacitance. In the presence of a time-varying magnetic field, the sensor resonates to generate a harmonic response having a frequency, amplitude and bandwidth. A magnetic field response recorder wirelessly transmits the time-varying magnetic field to the sensor and wirelessly detects the sensor's response frequency, amplitude and bandwidth.

  10. Upper crustal fault zones: Constraining structure and dynamics using electrical conductivity

    OpenAIRE

    Hoffmann-Rothe, A.; Oliver Ritter; Christoph Janssen;  

    2003-01-01

    Upper crustal fault zones, either fossil or active, are often connected with electrical conductivity anomalies. These anomalies depend on properties such as the porosity/permeability of the fault zone material, the fluid content or the state of healing/cementation of the fault-fracture mesh; properties that moreover control the ability of a fault to accumulate strain. Structural heterogeneities caused by the faulting process are therefore believed to either increase or decrease the electrical...

  11. Evolution of plant P-type ATPases

    Directory of Open Access Journals (Sweden)

    Christian N.S. Pedersen

    2012-02-01

    Full Text Available Five organisms having completely sequenced genomes and belonging to all major branches of green plants (Viridiplantae were analyzed with respect to their content of P-type ATPases encoding genes. These were the chlorophytes Ostreococcus tauria and Chlamydomonas reinhardtii, and the streptophytes Physcomitrella patens (a moss, Selaginella moellendorffii (a primitive vascular plant, and Arabidopsis thaliana (a model flowering plant. Each organism contained sequences for all five subfamilies of P-type ATPases. Our analysis demonstrates when specific subgroups of P-type ATPases disappeared in the evolution of Angiosperms. Na/K-pump related P2C ATPases were lost with the evolution of streptophytes whereas Na+ or K+ pumping P2D ATPases and secretory pathway Ca2+-ATPases remained until mosses. An N-terminally located calmodulin binding domain in P2B ATPases can only be detected in pumps from Streptophytae, whereas, like in animals, a C-terminally localized calmodulin binding domain might be present in chlorophyte P2B Ca2+-ATPases. Chlorophyte genomes encode P3A ATPases resembling protist plasma membrane H+-ATPases and a C-terminal regulatory domain is missing. The complete inventory of P-type ATPases in the major branches of Viridiplantae is an important starting point for elucidating the evolution in plants of these important pumps.

  12. Field Emission Characteristics of Conducting Polymer Films Conditioned by Electric Discharge

    Institute of Scientific and Technical Information of China (English)

    Guohong LAI; Zhenglin LI; Lan CHENG; Junbiao PENG

    2006-01-01

    A pure conducting polymer(PANI-CSA)film conditioned by an electric discharge was tentatively utilized as an cathode for emitting electrons under electric fields. The emission of electrons was observed using a phosphor(ZnO:Zn)screen excited by electrons from the conditioned film. The film morphology was investigated using a scanning electron microscope and it was found that undulate whisker-like sites formed on the surface. The emission was presumably due to the undulate whisker-like sites. The field enhancement factor was estimated to be as high as 1150. The electron emitting process of the PANI-CSA film conditioned by electric discharge was also discussed.

  13. Grain Size Effect on Electrical Conductivity and Giant Magnetoresistance of Bulk Magnetic Polycrystals

    Institute of Scientific and Technical Information of China (English)

    LUO Wei; ZHU Lin-Li; ZHENG Xiao-Jing

    2009-01-01

    By solving the Boltzmann transport equation and considering the spin-dependent grain boundary scattering, the distribution of electrons in grains and the electrical transport properties in the applied magnetic field are studied. With regard to the dominant influence of grain boundary scattering which is taken as a boundary condi-tion for the electrical transport, the grain size-dependent electrical conductivity is investigated. In addition, the reorientation of the relative magnetization between grains brings the change of the electron spin when the magne-tonanocrystalline material is subjected to the magnetic field, resulting in the remarkable giant magnetoresistance effect.

  14. Analysis of in-situ electrical conductivity data from the HFIR TRIST-ER1 experiment

    Energy Technology Data Exchange (ETDEWEB)

    Zinkle, S.J.; Snead, L.L. [Oak Ridge National Lab., TN (United States); Shikama, T. [Tohoku Univ. (Japan)] [and others

    1997-08-01

    The current vs. applied voltage data generated from the HFIR TRIST-ER1 experiment have been analyzed to determine the electrical conductivity of the 15 aluminum oxide specimens and the MgO-insulated electrical cables as a function of irradiation dose. With the exception of the 0.05%Cr-doped sapphire (ruby) specimen, the electrical conductivity of the alumina specimens remained at the expected radiation induced conductivity (RIC) level of <10{sup -6} S/m during full-power reactor irradiation (10-16 kGy/s) at 450-500{degrees}C up to a maximum dose of {approximately}3 dpa. The ruby specimen showed a rapid initial increase in conductivity to {approximately}2 x 10{sup -4} S/m after {approximately}0.1 dpa, followed by a gradual decrease to <1 x 10{sup -6} S/m after 2 dpa. Nonohmic electrical behavior was observed in all of the specimens, and was attributed to preferential attraction of ionized electrons in the capsule gas to the unshielded low-side bare electrical leads emanating from the subcapsules. The electrical conductivity was determined from the slope of the specimen current vs. voltage curve at negative voltages, where the gas ionization effect was minimized. Dielectric breakdown tests performed on unirradiated mineral-insulated coaxial cables identical to those used in the high voltage coaxial cables during the 3-month irradiation is attributable to thermal dielectric breakdown in the glass seals at the end of the cables, as opposed to a radiation-induced electrical degradation (RIED) effect.

  15. Application of conductive polymers, scaffolds and electrical stimulation for nerve tissue engineering.

    Science.gov (United States)

    Ghasemi-Mobarakeh, Laleh; Prabhakaran, Molamma P; Morshed, Mohammad; Nasr-Esfahani, Mohammad Hossein; Baharvand, Hossein; Kiani, Sahar; Al-Deyab, Salem S; Ramakrishna, Seeram

    2011-04-01

    Among the numerous attempts to integrate tissue engineering concepts into strategies to repair nearly all parts of the body, neuronal repair stands out. This is partially due to the complexity of the nervous anatomical system, its functioning and the inefficiency of conventional repair approaches, which are based on single components of either biomaterials or cells alone. Electrical stimulation has been shown to enhance the nerve regeneration process and this consequently makes the use of electrically conductive polymers very attractive for the construction of scaffolds for nerve tissue engineering. In this review, by taking into consideration the electrical properties of nerve cells and the effect of electrical stimulation on nerve cells, we discuss the most commonly utilized conductive polymers, polypyrrole (PPy) and polyaniline (PANI), along with their design and modifications, thus making them suitable scaffolds for nerve tissue engineering. Other electrospun, composite, conductive scaffolds, such as PANI/gelatin and PPy/poly(ε-caprolactone), with or without electrical stimulation, are also discussed. Different procedures of electrical stimulation which have been used in tissue engineering, with examples on their specific applications in tissue engineering, are also discussed.

  16. Magnetic resonance electrical impedance tomography (MREIT): conductivity and current density imaging

    Science.gov (United States)

    Seo, Jin Keun; Kwon, Ohin; Woo, Eung Je

    2005-01-01

    This paper reviews the latest impedance imaging technique called Magnetic Resonance Electrical Impedance Tomography (MREIT) providing information on electrical conductivity and current density distributions inside an electrically conducting domain such as the human body. The motivation for this research is explained by discussing conductivity changes related with physiological and pathological events, electromagnetic source imaging and electromagnetic stimulations. We briefly summarize the related technique of Electrical Impedance Tomography (EIT) that deals with cross-sectional image reconstructions of conductivity distributions from boundary measurements of current-voltage data. Noting that EIT suffers from the ill-posed nature of the corresponding inverse problem, we introduce MREIT as a new conductivity imaging modality providing images with better spatial resolution and accuracy. MREIT utilizes internal information on the induced magnetic field in addition to the boundary current-voltage measurements to produce three-dimensional images of conductivity and current density distributions. Mathematical theory, algorithms, and experimental methods of current MREIT research are described. With numerous potential applications in mind, future research directions in MREIT are proposed.

  17. Investigation on magnetoacoustic signal generation with magnetic induction and its application to electrical conductivity reconstruction.

    Science.gov (United States)

    Ma, Qingyu; He, Bin

    2007-08-21

    A theoretical study on the magnetoacoustic signal generation with magnetic induction and its applications to electrical conductivity reconstruction is conducted. An object with a concentric cylindrical geometry is located in a static magnetic field and a pulsed magnetic field. Driven by Lorentz force generated by the static magnetic field, the magnetically induced eddy current produces acoustic vibration and the propagated sound wave is received by a transducer around the object to reconstruct the corresponding electrical conductivity distribution of the object. A theory on the magnetoacoustic waveform generation for a circular symmetric model is provided as a forward problem. The explicit formulae and quantitative algorithm for the electrical conductivity reconstruction are then presented as an inverse problem. Computer simulations were conducted to test the proposed theory and assess the performance of the inverse algorithms for a multi-layer cylindrical model. The present simulation results confirm the validity of the proposed theory and suggest the feasibility of reconstructing electrical conductivity distribution based on the proposed theory on the magnetoacoustic signal generation with magnetic induction.

  18. Zero-differential conductance of two-dimensional electrons in crossed electric and magnetic fields

    Science.gov (United States)

    Bykov, A. A.; Byrnes, Sean; Dietrich, Scott; Vitkalov, Sergey; Marchishin, I. V.; Dmitriev, D. V.

    2013-02-01

    An electronic state with zero-differential conductance is found in nonlinear response to an electric field E applied to two dimensional Corbino discs of highly mobile carriers placed in quantizing magnetic fields. The state occurs above a critical electric field E>Eth at low temperatures and is accompanied by an abrupt dip in the differential conductance. The proposed model considers a local instability of the electric field E as the origin of the observed phenomenon. Comparison between the observed electronic state and the state with zero differential resistance, occurring in Hall bar geometry, indicates that the nonlinear response of edge states and/or skipping orbits is not essential in the studied samples. The result confirms that quantal heating is the dominant nonlinear mechanism leading to electronic states with both zero differential resistance and conductance.

  19. Facile synthesis and electrical conductivity of carbon nanotube reinforced nanosilver composite

    Energy Technology Data Exchange (ETDEWEB)

    Pal, Hemant [National Institute of Technology, Hamirpur (India). Dept. of Physics; Govt. College Chowari, Chamba (H.P.) (India). Dept. of Physics; Sharma, Vimal [National Institute of Technology, Hamirpur (India). Dept. of Physics; Kumar, Rajesh [Jaypee Univ. of Information and Technology, Solan (H.P.) (India). Dept. of Physics; Thakur, Nagesh [Himachal Pradesh Univ., Shimla (H.P.) (India). Dept. of Physics

    2012-12-15

    Metal matrix nanocomposites reinforced with carbon nanotubes (CNTs) have become popular in industrial applications. Due to their excellent thermophysical and mechanical properties, CNTs are considered as attractive filler for the improvement in properties of metals. In the present work, we have synthesized noncovalently functionalized CNT reinforced nanosilver composites by using a modified molecular level mixing method. The structure and morphology of nanocomposites are characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and energy dispersive spectroscopy. The electrical conductivity of silver-CNT nanocomposites measured by the four-point probe method is found to be more than that of the pure nanosilver. The significant improvement in electrical conductivity of Ag/CNT nanocomposites stems from homogenous and embedded distribution of CNTs in a silver matrix with intact structure resulting from noncovalent functionalization. The low temperature sintering also enhances the electrical conductivity of Ag/CNT nanocomposites. (orig.)

  20. In vivo measurements of electrical conductivity of porcine organs at low frequency: new method of measurement.

    Science.gov (United States)

    Spottorno, J; Multigner, M; Rivero, G; Alvarez, L; de la Venta, J; Santos, M

    2012-10-01

    Calculations of the induced currents created in the human body by external electromagnetic fields would be more accurate provided that more realistic experimental values of the electrical properties of the body were available. The purpose of this work is to experimentally obtain values for the conductivity of living organs in conditions close to the real situation. Two-electrode in vivo measurements of the bioimpedance of some porcine organs have been performed. From these measurements and taking into account geometrical considerations, the electrical conductivity for the kidney, liver, heart, and spinal cord has been obtained and were found to be higher than the values reported in the literature. Furthermore, a new experimental procedure is proposed where the conductivity is determined from the values of the electrical potential and currents that are induced by an external electromagnetic field created by a coil placed close to the organ under study.

  1. Electrical Conductivity of Fine Crystalline Graphite under the Influence of the Hydrostatic Pressure

    Directory of Open Access Journals (Sweden)

    I.V. Ovsiienko

    2016-06-01

    Full Text Available It was investigated the influence of hydrostatic pressure on the electrical conductivity of crystalline graphite in temperature range (77-293 K. It was revealed that the reducing of electrical resistivity in specimens of fine crystalline graphite under the action of hydrostatic pressure is due to increasing of overlap between valence and conduction bands that leads to increase of the concentration of free charge carriers. The change of the overlap of valence and conduction bands was estimated. It is shown the decrease of the distance between the graphite layers under pressure is irreversible process, when load is remove the electric resistance increases slightly, but does not acquire the initial value.

  2. IONIC CONDUCTIVITY AND ELECTRICAL PROPERTIES OF CARBOXYMETHYL CELLULOSE - NH4Cl SOLID POLYMER ELECTROLYTES

    Directory of Open Access Journals (Sweden)

    N. H. AHMAD

    2016-06-01

    Full Text Available In this present work, carboxymethyl cellulose (CMC – ammonium chloride (NH4Cl solid polymer electrolyte (SPE films were prepared by solution casting method. The ionic conductivity and electrical properties of SPE films were investigated using Electrical Impedance Spectroscopy. SPE film containing 16 wt. % NH4Cl exhibited the highest ionic conductivity of 1.43 x 10-3 S/cm at ambient temperature, 303K. The temperature dependence SPE films showed an Arrhenius-type relation where the regression values obtained from the log conductivity versus reciprocal temperature is close to unity (R2≈1. The electrical properties have been measured as a function of frequency of Ԑr,Ԑi, Mr, Mi shown a non-Debye type behavior

  3. Mechanically robust, electrically conductive ultralow-density carbon nanotube-based aerogels

    Science.gov (United States)

    Worsley, Marcus A; Baumann, Theodore F; Satcher, Jr., Joe H

    2014-04-01

    A method of making a mechanically robust, electrically conductive ultralow-density carbon nanotube-based aerogel, including the steps of dispersing nanotubes in an aqueous media or other media to form a suspension, adding reactants and catalyst to the suspension to create a reaction mixture, curing the reaction mixture to form a wet gel, drying the wet gel to produce a dry gel, and pyrolyzing the dry gel to produce the mechanically robust, electrically conductive ultralow-density carbon nanotube-based aerogel. The aerogel is mechanically robust, electrically conductive, and ultralow-density, and is made of a porous carbon material having 5 to 95% by weight carbon nanotubes and 5 to 95% carbon binder.

  4. A Route for Polymer Nanocomposites with Engineered Electrical Conductivity and Percolation Threshold

    Directory of Open Access Journals (Sweden)

    Lawrence T. Drzal

    2010-02-01

    Full Text Available Polymer nanocomposites with engineered electrical properties can be made by tuning the fabrication method, processing conditions and filler’s geometric and physical properties. This work focuses on investigating the effect of filler’s geometry (aspect ratio and shape, intrinsic electrical conductivity, alignment and dispersion within the polymer, and polymer crystallinity, on the percolation threshold and electrical conductivity of polypropylene based nanocomposites. The conductive reinforcements used are exfoliated graphite nanoplatelets, carbon black, vapor grown carbon fibers and polyacrylonitrile carbon fibers. The composites are made using melt mixing followed by injection molding. A coating method is also employed to improve the nanofiller’s dispersion within the polymer and compression molding is used to alter the nanofiller’s alignment.

  5. Electrical conductivity anomaly beneath Mare Serenitatis detected by Lunokhod 2 and Apollo 16 magnetometers

    Science.gov (United States)

    Vanian, L. L.; Vnuchkova, T. A.; Egorov, I. V.; Basilevskii, A. T.; Eroshenko, E. G.; Fainberg, E. B.; Dyal, P.; Daily, W. D.

    1979-01-01

    Magnetic fluctuations measured by the Lunokhod 2 magnetometer in the Bay Le Monnier are distinctly anisotropic when compared to simultaneous Apollo 16 magnetometer data measured 1100 km away in the Descartes highlands. This anisotropy can be explained by an anomalous electrical conductivity of the upper mantle beneath Mare Serenitatis. A model is presented of anomalously lower electrical conductivity beneath Serenitatis and the simultaneous magnetic data from the Lunokhod 2 site at the mare edge and the Apollo 16 site are compared to the numerically calculated model solutions. This comparison indicates that the anisotropic fluctuations can be modeled by a nonconducting layer in the lunar lithosphere which is 150 km thick beneath the highlands and 300 km thick beneath Mare Serenitatis. A decreased electrical conductivity in the upper mantle beneath the mare may be due to a lower temperature resulting from heat carried out the magma source regions to the surface during mare flooding.

  6. Mechanically robust, electrically conductive ultralow-density carbon nanotube-based aerogels

    Energy Technology Data Exchange (ETDEWEB)

    Worsley, Marcus A.; Baumann, Theodore F.; Satcher, Jr, Joe H.

    2016-07-05

    A method of making a mechanically robust, electrically conductive ultralow-density carbon nanotube-based aerogel, including the steps of dispersing nanotubes in an aqueous media or other media to form a suspension, adding reactants and catalyst to the suspension to create a reaction mixture, curing the reaction mixture to form a wet gel, drying the wet gel to produce a dry gel, and pyrolyzing the dry gel to produce the mechanically robust, electrically conductive ultralow-density carbon nanotube-based aerogel. The aerogel is mechanically robust, electrically conductive, and ultralow-density, and is made of a porous carbon material having 5 to 95% by weight carbon nanotubes and 5 to 95% carbon binder.

  7. A Study on Electrically Conducting Magnesia—carbon Bricks for DC EAF

    Institute of Scientific and Technical Information of China (English)

    TONGXiaojun; YANLiyi; 等

    1998-01-01

    This paper gives a brief introduction to a kind of special refractories for DC EAF-electrically conducting magnesia-carbon bricks.The application of the conductive magnesia-carbon brick as a hearth electrode is a trend of development in DC arc furnace hearth bootom because of its features of anti corrosion and easy repatching,This is a proven process already available abroad.After a study of teh effect of different amount of graphite added and pretreating temperatures on the eletric-conductivity of magnesia-carbon bricks it has been found that for a balance between electric and thermal conductivities,the proper amount of graphite to be added should be 8%-14% and the pretreatment at temperature of 1300-1500℃ will result in the formation inside the magnesia-carbon bricks of a continuous three-dimensional network of graphite and semi-coke,thus making the brick conductive.

  8. The Electrical Conductivity of Gabbro at High Temperature and High Pressure

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The electric conductivity of gabbro has been measured at 1.0-2.0 Gpa and 320-700℃,and the conduction mechanism has been analyzed in terms of the impedance spectra.Experimental results indicated that the electric conductivity depends on the frequency of alter-native current.Impedance arcs representing the conduction mechanism of grain interiors are displayed in the complex impedance plane ,and the mechanism is dominated at high pressure.These arcs occur over the range of 102-k×105Hz(k is the positive integer from 1 to 9) .On the basis of our results and previous work,it is concluded that gabbro cannot form any high conductivity layer (HCL) in the middle-lower crust.

  9. The Electrical Conductivity of Gabbro at High Temperature and High Pressure

    Institute of Scientific and Technical Information of China (English)

    王多君; 李和平; 易丽; 张卫刚; 刘丛强; 苏根利; 丁东业

    2002-01-01

    The electric conductivity of gabbro has been measured at 1.0 - 2.0 GPa and 320-700℃, and the conduction mechanism has been analyzed in terms of the impedance spectra.Experimental results indicated that the electric conductivity depends on the frequency of alternative current. Impedance arcs representing the conduction mechanism of grain interiors are displayed in the complex impedance plane, and the mechanism is dominated at high pressure.These arcs occur over the range of 102 - k× 105 Hz (k is the positive integer from 1 to 9). On the basis of our results and previous work, it is concluded that gabbro cannot form any high conductivity layer (HCL) in the middle-lower crust.

  10. The electrical conductivities of candidate beam-waveguide antenna shroud materials

    Science.gov (United States)

    Otoshi, T. Y.; Franco, M. M.

    1994-01-01

    The shroud on the beam-waveguide (BWG) antenna at DSS 13 is made from highly magnetic American Society for Testing and Materials (ASTM) A36 steel. Measurements at 8.42 GHz showed that this material (with paint) has a very poor electrical conductivity that is 600 times worse than aluminum. In cases where the BWG mirrors might be slightly misaligned, unintentional illumination and poor electrical conductivity of the shroud walls can cause system noise temperature to be increased significantly. This potential increase of noise temperature contribution can be reduced through the use of better conductivity materials for the shroud walls. An alternative is to attempt to improve the conductivity of the currently used ASTM A36 steel by means of some type of plating, surface treatment, or high-conductivity paints. This article presents the results of a study made to find improved materials for future shrouds and mirror supports.

  11. Study on the Electrical Conductivity of Au Nanoparticle/ Chloroform and Toluene Suspensions

    Institute of Scientific and Technical Information of China (English)

    FANG Fang; ZHANG Ya-fei

    2005-01-01

    Au nanoparticles capped by hexadecanethiol and dodecanethiol were chemically synthesized. The characteristics of electrical conductivity for the capped nanoparticles dissolved in chloroform and toluene solvents were investigated. The electrical conductivity of the samples is conspicuously Au nanoparticle concentration dependent.The results show that a rapid conductivity increases when the nanoparticle concentration increases from low value to a moderate value of 5.47 g/L and 11.22 g/L, which is capped by hexadecanethiol and dodecanethiol in chloroform solvent, and 2.77 g/L and 7.88 g/L in toluene solvent. The room-temperature dc conductivity σdc of Au nanoparticle capped by hexadecanethiol is smaller than that capped by dodecanethiol in the whole range of Au nanoparticle concentrations. The conductivity of Au nanoparticle suspensions increases almost linearly in the temperature range in above two solvents.

  12. Effect of Electrical Conductivity on the Soil of Irrigated Farmlands of Kaduna Metropolis Nigeria

    Directory of Open Access Journals (Sweden)

    W.L.O Jimoh

    2014-07-01

    Full Text Available The objective of this research work is to assess the level of electrical conductivity in the soil of irrigated farmlands of Kaduna metropolis using conductivity meter. It was found that lowest electrical conductivity of 1.14 µScm-1 was obtained from Badiko samples and the highest from Kawo with conductivity of 2.63 µScm-1 . It was also found that from the ANOVA p = 0.000<0.05 shows that there is significant differences in the electrical conductivity of soil across the various sampling sites. The real differences of soil conductivity was further analyzed by a post-hoc test using the Duncan Multiple range test with samples from Badiko and Nasarawa having the least soil conductivity. In the second homogeneous subgroup there is Danmani, Abakpa, Makera, Doka etc. The third subgroup include Rigasa, Kabala, Barnawa,Kakuri, Kawo, Malali while the highest soil conductivity fall in the fourth subgroup which include Kawo and Rigachikun (control sites. Infact most of the samples were moderately saline while some are non saline, as a result of human activities occurring in such sites, hence, increase the mobility of heavy metals in the soil. Thereby leading to the toxicity and polluting the soil as well as reducing its ability in the production of crops and vegetables in the affected agricultural areas.

  13. Influence of Electric Fields and Conductivity on Pollen Tube Growth assessed via Electrical Lab-on-Chip.

    Science.gov (United States)

    Agudelo, Carlos; Packirisamy, Muthukumaran; Geitmann, Anja

    2016-01-25

    Pollen tubes are polarly growing plant cells that are able to rapidly respond to a combination of chemical, mechanical, and electrical cues. This behavioural feature allows them to invade the flower pistil and deliver the sperm cells in highly targeted manner to receptive ovules in order to accomplish fertilization. How signals are perceived and processed in the pollen tube is still poorly understood. Evidence for electrical guidance in particular is vague and highly contradictory. To generate reproducible experimental conditions for the investigation of the effect of electric fields on pollen tube growth we developed an Electrical Lab-on-Chip (ELoC). Pollen from the species Camellia displayed differential sensitivity to electric fields depending on whether the entire cell or only its growing tip was exposed. The response to DC fields was dramatically higher than that to AC fields of the same strength. However, AC fields were found to restore and even promote pollen growth. Surprisingly, the pollen tube response correlated with the conductivity of the growth medium under different AC frequencies--consistent with the notion that the effect of the field on pollen tube growth may be mediated via its effect on the motion of ions.

  14. ZnO Coatings with Controlled Pore Size, Crystallinity and Electrical Conductivity

    Directory of Open Access Journals (Sweden)

    Roman SCHMACK

    2016-05-01

    Full Text Available Zinc oxide is a wide bandgap semiconductor with unique optical, electrical and catalytic properties. Many of its practical applications rely on the materials pore structure, crystallinity and electrical conductivity. We report a synthesis method for ZnO films with ordered mesopore structure and tuneable crystallinity and electrical conductivity. The synthesis relies on dip-coating of solutions containing micelles of an amphiphilic block copolymer and complexes of Zn2+ ions with aliphatic ligands. A subsequent calcination at 400°C removes the template and induces crystallization of the pore walls. The pore structure is controlled by the template polymer, whereas the aliphatic ligands control the crystallinity of the pore walls. Complexes with a higher thermal stability result in ZnO films with a higher content of residual carbon, smaller ZnO crystals and therefore lower electrical conductivity. The paper discusses the ability of different types of ligands to assist in the synthesis of mesoporous ZnO and relates the structure and thermal stability of the precursor complexes to the crystallinity and electrical conductivity of the zinc oxide.DOI: http://dx.doi.org/10.5755/j01.ms.22.1.8634

  15. Nerve growth factor-immobilized polypyrrole: Bioactive electrically conducting polymer for enhanced neurite extension

    Science.gov (United States)

    Gomez, Natalia; Schmidt, Christine E.

    2010-01-01

    Biomaterials that present multiple stimuli are attractive for a number of biomedical applications. In particular, electrical and biological cues are important factors to include in interfaces with neurons for applications such as nerve conduits and neural probes. Here, we report the combination of these two stimuli, by immobilizing nerve growth factor (NGF) on the surface of the electrically conducting polymer polypyrrole (PPy). NGF was immobilized using an intermediate linker provided by a layer of polyallylamine conjugated to an arylazido functional group. Upon exposure to UV light and activation of the azido groups, NGF was fixed to the substrate. Three different surface concentrations were obtained (0.21–0.98 ng/mm2) and similar levels of neurite extension were observed on immobilized NGF as with soluble NGF. Additionally, electrical stimulation experiments were conducted with the modified polymer and revealed a 50% increase in neurite outgrowth in PC12 cells compared to experiments without electrical stimulation. This novel modification of PPy provides both electrical and biological stimulation, by presenting tethered growth factors and only producing a small decrease in the material's properties (conductivity ~10 S cm−1) when compared to other modification techniques (conductivity ~10−3–10−6 S cm−1. PMID:17111407

  16. ZnO Coatings with Controlled Pore Size, Crystallinity and Electrical Conductivity

    Directory of Open Access Journals (Sweden)

    Roman SCHMACK

    2016-05-01

    Full Text Available Zinc oxide is a wide bandgap semiconductor with unique optical, electrical and catalytic properties. Many of its practical applications rely on the materials pore structure, crystallinity and electrical conductivity. We report a synthesis method for ZnO films with ordered mesopore structure and tuneable crystallinity and electrical conductivity. The synthesis relies on dip-coating of solutions containing micelles of an amphiphilic block copolymer and complexes of Zn2+ ions with aliphatic ligands. A subsequent calcination at 400°C removes the template and induces crystallization of the pore walls. The pore structure is controlled by the template polymer, whereas the aliphatic ligands control the crystallinity of the pore walls. Complexes with a higher thermal stability result in ZnO films with a higher content of residual carbon, smaller ZnO crystals and therefore lower electrical conductivity. The paper discusses the ability of different types of ligands to assist in the synthesis of mesoporous ZnO and relates the structure and thermal stability of the precursor complexes to the crystallinity and electrical conductivity of the zinc oxide.DOI: http://dx.doi.org/10.5755/j01.ms.22.1.8634

  17. Increase in Electrical Conductivity of MOF to Billion-Fold upon Filling the Nanochannels with Conducting Polymer.

    Science.gov (United States)

    Dhara, Barun; Nagarkar, Sanjog S; Kumar, Jitender; Kumar, Vikash; Jha, Plawan Kumar; Ghosh, Sujit K; Nair, Sunil; Ballav, Nirmalya

    2016-08-01

    Redox-active pyrrole (Py) monomers were intercalated into 1D nanochannels of [Cd(NDC)0.5(PCA)]·Gx (H2NDC = 2,6-napthalenedicarboxylic acid, HPCA = 4-pyridinecarboxylic acid, G = guest molecules) (1) - a fluorescent 3D MOF (λem = 385 nm). Subsequent activation of 1⊃Py upon immersing into iodine (I2) solution resulted in an increment of the bulk electrical conductivity by ∼9 orders of magnitude. The unusual increase in conductivity was attributed to the formation of highly oriented and conducting polypyrrole (PPy) chains inside 1D nanochannels and specific host-guest interaction in 1⊃PPy thereof. The Hall-effect measurements suggested 1⊃PPy to be an n-type semiconductor material with remarkably high-carrier density (η) of ∼1.5 × 10(17) cm(-3) and mobility (μ) of ∼8.15 cm(2) V(-1) s(-1). The fluorescence property of 1 was almost retained in 1⊃PPy with concomitant exciplex-type emission at higher wavelength (λem = 520 nm). The here-presented results on [MOF⊃Conducting Polymer] systems in general will serve as a prototype experiment toward rational design for the development of highly conductive yet fluorescent MOF-based materials for various optoelectronic applications.

  18. Enhancing the electrical conductivity of carbon-nanotube-based transparent conductive films using functionalized few-walled carbon nanotubes decorated with palladium nanoparticles as fillers.

    Science.gov (United States)

    Li, Yu-An; Tai, Nyan-Hwa; Chen, Swe-Kai; Tsai, Tsung-Yen

    2011-08-23

    This work demonstrates the processing and characterization of the transparent and highly electrically conductive film using few-walled carbon nanotubes (FWCNTs) decorated with Pd nanoparticles as fillers. The approach included functionalizing the FWCNTs, immersing them in an aqueous solution of palladate salts, and subsequently subjecting them to a reduction reaction in H(2). Field-emission scanning electron microscopy and transmission electron microscopy images showed that the functionalized FWCNTs (f-FWCNTs) were decorated with uniform and homogeneous Pd nanoparticles with an average diameter of 5 nm. A shift of the G-band to a higher frequency in the Raman spectra of the Pd-decorated f-FWCNTs (Pd@f-FWCNTs) illustrates that the p-type doping effect was enhanced. X-ray photoelectron spectroscopy and energy-dispersive X-ray spectroscopy showed that PdCl(2) was the primary decoration compound on the f-FWCNTs prior to the reduction reaction and that Pd nanoparticles were the only decorated nanoparticles after H(2) reduction. The contact resistance between the metallic materials and the semiconducting CNTs in FWCNTs, controlled by the Schottky barrier, was significantly decreased compared to the pristine FWCNTs. The decrease in contact resistance is attributed to the 0.26 eV increase of the work function of the Pd@f-FWCNTs. Extremely low sheet resistance of 274 ohm/sq of the poly(ethylene terephthalate) substrates coated with Pd@f-FWCNTs was attained, which was 1/25 the resistance exhibited by those coated with FWCNTs, whereas the same optical transmittance of 81.65% at a wavelength of 550 nm was maintained. © 2011 American Chemical Society

  19. Ammonia plasma modification towards a rapid and low temperature approach for tuning electrical conductivity of ZnO nanowires on flexible substrates

    Science.gov (United States)

    Ong, Wei Li; Zhang, Chun; Ho, Ghim Wei

    2011-10-01

    Though the fabrication of ZnO nanostructures is economical and low temperature, the lack of a facile, reliable and low temperature methodology to tune its electrical conductivity has prevented it from competing with other semiconductors. Here, we carried out surface modification of ZnO nanowires using ammonia plasma with no heat treatment, and studied their electrical properties over an extended time frame of more than a year. The fabrication of flexible devices was demonstrated via various methods of transferring and aligning as-synthesized ZnO nanowires onto plastic substrates. Hall measurements of the plasma modified ZnO nanowires revealed p-type conductivity. The N1s peak was present in the X-ray photoelectron spectrum of the surface modified ZnO, showing the presence of ammonia complexes. Low temperature photoluminescence showed evidence of acceptor-bound exciton emission. The resulting electrical devices, a chemical sensor and p-n homojunction, show the tunable electrical response of the surface modified ZnO nanowires.

  20. Frequency-dependent electrical conductivity of concentrated dispersions of spherical colloidal particles.

    Science.gov (United States)

    Bradshaw-Hajek, B H; Miklavcic, S J; White, L R

    2008-05-06

    This paper outlines the application of a self-consistent cell-model theory of electrokinetics to the problem of determining the electrical conductivity of a dense suspension of spherical colloidal particles. Numerical solutions of the standard electrokinetic equations, subject to self-consistent boundary conditions, are implemented in formulas for the electrical conductivity appropriate to the particle-averaged cell model of the suspension. Results of calculations as a function of frequency, zeta potential, volume fraction, and electrolyte composition, are presented and discussed.

  1. Lustrous copper nanoparticle film: Photodeposition with high quantum yield and electric conductivity

    Science.gov (United States)

    Miyagawa, Masaya; Yonemura, Mari; Tanaka, Hideki

    2016-11-01

    Cu nanoparticle (NP) film has attracted much attention due to its high electric conductivity. In the present study, we prepared a Cu NP film on a TiO2-coated substrate by photoreduction of copper acetate solution. The obtained film showed high electric conductivity and metallic luster by the successive deposition of Cu NP. Moreover, the film was decomposed on exposure to fresh air, and its decomposition reaction mechanisms were proposed. Hence, we concluded that the obtained lustrous film was composed of Cu NP, even though its physical properties was similar to bulk copper.

  2. Theoretical Computation for Non-Equilibrium Air Plasma Electrical Conductivity at Atmospheric Pressure

    Institute of Scientific and Technical Information of China (English)

    HAN Dong; GUO Wen-Kang; XU Ping; LIANG Rong-Qing

    2007-01-01

    @@ Based on the Chapman-Enskog theory, we calculate the electrical conductivity of non-equilibrium air plasma in the two-temperature model. We consider different degrees of non-equilibrium, which is defined by the ratio of electronic temperature to heavy particles temperature. The method of computing the composition of air plasma is demonstrated. After calculating the electrical conductivity from electron temperature 1000 K to 15000K, the present result is compared with Murphy's study [Plasma Chem. Plasma Process 15 (1994) 279] for equilibrium case. All the calculation is completed at atmospheric pressure. The present results may have potential applications in numerical calculation of non-equilibrium air plasma.

  3. Statistical properties of Joule heating rate, electric field and conductances at high latitudes

    Directory of Open Access Journals (Sweden)

    A. T. Aikio

    2009-07-01

    Full Text Available Statistical properties of Joule heating rate, electric field and conductances in the high latitude ionosphere are studied by a unique one-month measurement made by the EISCAT incoherent scatter radar in Tromsø (66.6 cgmlat from 6 March to 6 April 2006. The data are from the same season (close to vernal equinox and from similar sunspot conditions (about 1.5 years before the sunspot minimum providing an excellent set of data to study the MLT and Kp dependence of parameters with high temporal and spatial resolution.

    All the parameters show a clear MLT variation, which is different for low and high Kp conditions. Our results indicate that the response of morning sector conductances and conductance ratios to increased magnetic activity is stronger than that of the evening sector. The co-location of Pedersen conductance maximum and electric field maximum in the morning sector produces the largest Joule heating rates 03–05 MLT for Kp≥3. In the evening sector, a smaller maximum occurs at 18 MLT. Minimum Joule heating rates in the nightside are statistically observed at 23 MLT, which is the location of the electric Harang discontinuity.

    An important outcome of the paper are the fitted functions for the Joule heating rate as a function of electric field magnitude, separately for four MLT sectors and two activity levels (Kp<3 and Kp≥3. In addition to the squared electric field, the fit includes a linear term to study the possible anticorrelation or correlation between electric field and conductance. In the midday sector, positive correlation is found as well as in the morning sector for the high activity case. In the midnight and evening sectors, anticorrelation between electric field and conductance is obtained, i.e. high electric fields are associated with low conductances. This is expected to occur in the return current regions adjacent to

  4. Ion Pair in Extreme Aqueous Environments, Molecular-Based and Electric Conductance Approaches

    Energy Technology Data Exchange (ETDEWEB)

    Chialvo, Ariel A [ORNL; Gruszkiewicz, Miroslaw {Mirek} S [ORNL; Simonson, J Michael {Mike} [ORNL; Palmer, Donald [ORNL; Cole, David R [ORNL

    2009-01-01

    We determine by molecular-based simulation the density profiles of the Na+!Cl! ion-pair association constant in steam environments along three supercritical isotherms to interrogate the behavior of ion speciation in dilute aqueous solutions at extreme conditions. Moreover, we describe a new ultra-sensitive flow-through electric conductance apparatus designed to bridge the gap between the currently lowest steam-density conditions at which we are experimentally able to attain electric conductance measurements and the theoretically-reachable zero-density limit. Finally, we highlight important modeling challenges encountered near the zero-density limit and discuss ways to overcome them.

  5. Remarkable enhancement of the electrical conductivity of carbon nanostructured thin films after compression.

    Science.gov (United States)

    Georgakilas, Vasilios; Koutsioukis, Apostolos; Petr, Martin; Tucek, Jiri; Zboril, Radek

    2016-06-01

    In this work, we demonstrate a significant improvement in the electrical conductivity of carbon nanostructured thin films, composed of graphene nanosheets and multiwalled carbon nanotubes, by compression/polishing. It is shown that the sheet resistance of compressed thin films of carbon nanostructures and hybrids is remarkably decreased in comparison with that of as-deposited films. The number of the interconnections, the distance between the nanostructures as well as their orientation are highly altered by the compression favoring the electrical conductivity of the compressed samples.

  6. Correlation Between the Raman Crystallinity of p-Type Micro-Crystalline Silicon Layer and Open Circuit Voltage of n-i-p Solar Cells.

    Science.gov (United States)

    Jung, Junhee; Kim, Sunbo; Park, Jinjoo; Shin, Chonghoon; Pham, Duy Phong; Kim, Jiwoong; Chung, Sungyoun; Lee, Youngseok; Yi, Junsin

    2015-10-01

    This article mainly discusses the difference between p-i-n and n-i-p type solar cells. Their structural difference has an effect on cell performance, such as open circuit voltage and fill factor. Although the deposition conditions are the same for both p-i-n and n-i-p cases, the substrate layers for depositing p-type microcrystalline silicon layers differ. In n-i-p cells, the substrate layer is p-type amorphous silicon oxide layer; whereas, in p-i-n cells, the substrate layer is ZnO:Al. The interfacial change leads to a 12% difference in the crystallinity of the p-type microcrystalline silicon layers. When the p-type microcrystalline silicon layer's crystallinity was not sufficient to activate an internal electric field, the open circuit voltage and fill factor decreased 0.075 V and 7.36%, respectively. We analyzed this problem by comparing the Raman spectra, electrical conductivity, activation energy and solar cell performance. By adjusting the thickness of the p-type microcrystalline silicon layer, we increased the open circuit voltage of the n-i-p cell from 0.835 to 0.91 V.

  7. Fabrication of p-type ZnSe:Sb nanowires for high-performance ultraviolet light photodetector application.

    Science.gov (United States)

    Nie, Biao; Luo, Lin-Bao; Chen, Jing-Jing; Hu, Ji-Gang; Wu, Chun-Yan; Wang, Li; Yu, Yong-Qiang; Zhu, Zhi-Feng; Jie, Jian-Sheng

    2013-03-08

    p-type ZnSe nanowires (NWs) with tunable electrical conductivity were fabricated on a large scale by evaporating a mixed powder composed of ZnSe and Sb in different ratios. According to the structural characterization, the Sb-doped ZnSe NWs are of single crystalline form and grow along the [001] direction. The presence of Sb in the ZnSe NWs was confirmed by XPS spectra. Electrical measurement of a single ZnSe:Sb NW based back-gate metal-oxide field-effect-transistor reveals that all the doped NWs exhibit typical p-type conduction characteristics, and the conductivity can be tuned over eight orders of magnitude, from 6.36 × 10(-7) S cm(-1) for the undoped sample to ∼37.33 S cm(-1) for the heavily doped sample. A crossed p-n nano-heterojunction photodetector made from the as-doped nanostructures displays pronounced rectification behavior, with a rectification ratio as high as 10(3) at ±5 V. Remarkably, it exhibits high sensitivity to ultraviolet light illumination with good reproducibility and quick photoresponse. Finally, the work mechanism of such a p-n junction based photodetector was elucidated. The generality of the above result suggests that the as-doped p-type ZnSe NWs will find wide application in future optoelectronics devices.

  8. Temperature dependence of dc electrical conductivity of activated carbon-metal oxide nanocomposites. Some insight into conduction mechanisms

    Science.gov (United States)

    Barroso-Bogeat, Adrián; Alexandre-Franco, María; Fernández-González, Carmen; Sánchez-González, José; Gómez-Serrano, Vicente

    2015-12-01

    From a commercial activated carbon (AC) and six metal oxide (Al2O3, Fe2O3, SnO2, TiO2, WO3 and ZnO) precursors, two series of AC-metal oxide nanocomposites are prepared by wet impregnation, oven-drying at 120 °C, and subsequent heat treatment at 200 or 850 °C in inert atmosphere. The temperature-dependent dc electrical conductivity of AC and the as-prepared nanocomposites is measured from room temperature up to ca. 200 °C in air atmosphere by the four-probe method. The decrease in conductivity for the hybrid materials as compared to AC is the result of a complex interplay between several factors, including not only the intrinsic conductivity, crystallite size, content and chemical nature of the supported nanoparticles, which ultimately depend on the precursor and heat treatment temperature, but also the adsorption of oxygen and water from the surrounding atmosphere. The conductivity data are discussed in terms of a thermally activated process. In this regard, both AC and the prepared nanocomposites behave as semiconductors, and the temperature-dependent conductivity data have been interpreted on the basis of the classical model proposed by Mott and Davis. Because of its high content of heteroatoms, AC may be considered as a heavily doped semiconductor, so that conduction of thermally excited carriers via acceptor or donor levels is expected to be the dominant mechanism. The activation energies for the hybrid materials suggest that the supported metal oxide nanoparticles strongly modify the electronic band structure of AC by introducing new trap levels in different positions along its band gap. Furthermore, the thermally activated conduction process satisfies the Meyer-Neldel rule, which is likely connected with the shift of the Fermi level due to the introduction of the different metal oxide nanoparticles in the AC matrix.

  9. Electrical conductivity of activated carbon-metal oxide nanocomposites under compression: a comparison study.

    Science.gov (United States)

    Barroso-Bogeat, A; Alexandre-Franco, M; Fernández-González, C; Macías-García, A; Gómez-Serrano, V

    2014-12-01

    From a granular commercial activated carbon (AC) and six metal oxide (Al2O3, Fe2O3, SnO2, TiO2, WO3 and ZnO) precursors, two series of AC-metal oxide nanocomposites were prepared by wet impregnation, oven-drying at 120 °C, and subsequent heat treatment at 200 or 850 °C in an inert atmosphere. Here, the electrical conductivity of the resulting products was studied under moderate compression. The influence of the applied pressure, sample volume, mechanical work, and density of the hybrid materials was thoroughly investigated. The DC electrical conductivity of the compressed samples was measured at room temperature by the four-probe method. Compaction assays suggest that the mechanical properties of the nanocomposites are largely determined by the carbon matrix. Both the decrease in volume and the increase in density were relatively small and only significant at pressures lower than 100 kPa for AC and most nanocomposites. In contrast, the bulk electrical conductivity of the hybrid materials was strongly influenced by the intrinsic conductivity, mean crystallite size, content and chemical nature of the supported phases, which ultimately depend on the metal oxide precursor and heat treatment temperature. The supported nanoparticles may be considered to act as electrical switches either hindering or favouring the effective electron transport between the AC cores of neighbouring composite particles in contact under compression. Conductivity values as a rule were lower for the nanocomposites than for the raw AC, all of them falling in the range of semiconductor materials. With the increase in heat treatment temperature, the trend is toward the improvement of conductivity due to the increase in the crystallite size and, in some cases, to the formation of metals in the elemental state and even metal carbides. The patterns of variation of the electrical conductivity with pressure and mechanical work were slightly similar, thus suggesting the predominance of the pressure

  10. Electrical conductivity of orthopyroxene: Implications for the water content of the asthenosphere

    Science.gov (United States)

    Dai, Lidong; Karato, Shun-ichiro

    2009-01-01

    Electrical conductivity of minerals is sensitive to water content and hence can be used to infer the water content in the mantle. However, previous studies to infer the water content in the upper mantle were based on pure olivine model of the upper mantle. Influence of other minerals particularly that of orthopyroxene needs to be included to obtain a better estimate of water content in view of the high water solubility in this mineral. Here we report new results of electrical conductivity measurements on orthopyroxene, and apply these results to estimate the water content of the upper mantle of Earth. We found that the electrical conductivity of orthopyroxene is enhanced by the addition of water in a similar way as other minerals such as olivine and pyrope garnet. Using these new results, we calculate the electrical conductivity of pyrolite mantle as a function of water content and temperature incorporating the temperature and water fugacity-dependent hydrogen partitioning. Reported values of asthenosphere conductivity of 4 × 10−2−10−1 S/m corresponds to the water content of 0.01–0.04 wt%, a result in good agreement with the petrological model of the upper mantle. PMID:20009379

  11. Electrically conducting polymer nanostructures confined in anodized aluminum oxide templates (AAO

    Directory of Open Access Journals (Sweden)

    I. Blaszczyk-Lezak

    2016-03-01

    Full Text Available Intrinsically or extrinsically conducting polymers are considered good candidates for replacement of metals in specific applications. In order to further expand their applications, it seems necessary to examine the influence of confinement effects on the electric properties of nanostructured conducting polymers in comparison to the bulk. The present study reports a novel way to fabricate and characterize high quality and controllable one-dimensional (1D polymer nanostructures with promising electrical properties, with the aid of two examples polyaniline (PANI and poly(vinylidene fluoride with multiwall carbon nanotubes (PVDF-MWCNT as representative of intrinsically and extrinsically conducting polymers, respectively. In this work, porous anodic aluminum oxide (AAO templates have been used both as a nanoreactor to synthesize 1D PANI nanostructures by polymerization of the ANI monomer and as a nanomold to prepare 1D PVDFMWCNT nanorods by melt infiltration of the precursor PVDF-MWCNT film. The obtained polymer nanostructures were morphologically and chemically characterized by SEM and Confocal Raman Spectroscopy, respectively, and the electrical properties determined by Broadband Dielectric Spectroscopy (BDS in a non-destructive way. SEM study allowed to establish the final nanostructure of PANI and PVDF-MWCNT and confirmed, in both cases, the well-aligned and uniform rodlike polymer nanostructures. Confocal Raman Microscopy has been performed to study the formation of the conducting emeraldine salt of PANI through all the length of AAO nanocavities. Finally, the electrical conductivity of both types of polymer nanostructures was easily evaluated by means of Dielectric Spectroscopy.

  12. Innovative methodology for electrical conductivity measurements and metal partition in biosolid pellets

    Science.gov (United States)

    Jordan, Manuel Miguel; Rincón-Mora, Beatriz; Belén Almendro-Candel, María; Navarro-Pedreño, José; Gómez-Lucas, Ignacio; Bech, Jaume

    2017-04-01

    Use of biosolids to improve the nutrient content in a soil is a common practice. The obligation to restore abandoned mine and the correct application of biosolids is guaranteed by the legislation on waste management, biosolids and soil conservation (Jordán et al. 2008). The present research was conducted to determine electrical conductivity in dry wastes (pellets) using a innovative methodology (Camilla and Jordán, 2009). On the other hand, the present study was designed to examine the distribution of selected heavy metals in biosolid pellets, and also to relate the distribution patterns of these metals. In this context, heavy metal concentrations were studied in biosolid pellets under different pressures. Electrical conductivity measurements were taken in biosolid pellets under pressures on the order of 50 to 150 MPa and with currents of 10-15 A. Measurements of electrical conductivity and heavy metal content for different areas (H1, H2, and H3) were taken. Total content of metals was determined following microwave digestion and analysed by ICP/MS. Triplicate portions were weighed in polycarbonate centrifuge tubes and sequentially extracted. The distribution of chemical forms of Cd, Ni, Cr, and Pb in the biosolids was studied using a sequential extraction procedure that fractionates the metal into soluble-exchangeable, specifically sorbed-carbonate bound, oxidizable, reducible, and residual forms. The residual, reducible, and carbonate-sorbed forms were dominant. Higher Cr and Ni content were detected in pellets made with biosolids from the H3. The highest Cd and Ni values were detected in the H2. The trends of the conductivity curves were similar for the sludge from the isolation surface (H1) and for the mesophilous area (H2). In the case of the thermophilous area (H3), the electrical conductivity showed extremely high values. This behaviour was similar in the case of the Cr and Ni content. However, in the case of Cd and Pb, the highest values were detected in

  13. Effect of temperature, pressure and iron content on the electrical conductivity of orthopyroxene

    Science.gov (United States)

    Zhang, Baohua; Yoshino, Takashi

    2016-12-01

    The electrical conductivity of (Mg1- x , Fe x )SiO3 orthopyroxene with various iron contents [ X Fe = Fe/(Fe + Mg) = 0, 0.1, 0.3, 0.5, 0.7 and 1.0] was measured in a Kawai-type multianvil apparatus by impedance spectroscopy over a wide range of pressure ( P) and temperature ( T) covering the stability field of orthopyroxene. Impedance spectroscopy measurements indicated that the electrical conductivity of orthopyroxene systematically increased with increasing total iron content. The conductivity slightly decreased with increasing pressure at a constant temperature. For samples with lower Fe content, two conduction mechanisms were identified from the Arrhenius behavior. A change in the activation enthalpy indicated that the dominant conduction mechanism changed from small polaron to ionic conduction with increasing temperature. At temperature below 1373 K, relatively low activation enthalpies and small positive activation volumes suggest that the dominant mechanism of charge transport is Fe2+‒Fe3+ hopping (small polaron). At higher temperatures above 1473 K, ionic conduction (via Mg vacancy mobility) dominates, with higher activation enthalpy exceeding 2 eV and larger positive activation volume. All electrical conductivity data fit the formula for electrical conductivity σ = σ0i exp [ { - {( {Δ E0i + PΔ V0i } )}/{k_{{B} T}}} ] + σ0p X_{{Fe}} exp { { - {[ {Δ E0p - α X_{{Fe}}^{1/3} + P( {Δ V0p - β X_{{Fe}} } )} ]}/{k_{{B} T}}} }, where σ 0 is the pre-exponential term, Δ E 0 and Δ V 0 are the activation energy and the activation volume at very low total iron concentration, k B is the Boltzmann constant, T is the absolute temperature, and superscripts i and p denote the ionic and small polaron conductions, respectively. Electrical conductivity of Al-free orthopyroxene with X Fe = 0.1 is distinctly lower than that of olivine with X Fe = 0.1. Above 3 GPa Al content in orthopyroxene becomes smaller in association with garnet formation. Unless iron content in

  14. Reconstruction of apparent orthotropic conductivity tensor image using magnetic resonance electrical impedance tomography

    Energy Technology Data Exchange (ETDEWEB)

    Sajib, Saurav Z. K.; Kim, Ji Eun; Jeong, Woo Chul; Kim, Hyung Joong; Woo, Eung Je [Department of Biomedical Engineering, Kyung Hee University, Yongin, Gyeonggi (Korea, Republic of); Kwon, Oh In, E-mail: oikwon@konkuk.ac.kr [Department of Mathematics, Konkuk University, Seoul (Korea, Republic of)

    2015-03-14

    Magnetic resonance electrical impedance tomography visualizes current density and/or conductivity distributions inside an electrically conductive object. Injecting currents into the imaging object along at least two different directions, induced magnetic flux density data can be measured using a magnetic resonance imaging scanner. Without rotating the object inside the scanner, we can measure only one component of the magnetic flux density denoted as B{sub z}. Since the biological tissues such as skeletal muscle and brain white matter show strong anisotropic properties, the reconstruction of anisotropic conductivity tensor is indispensable for the accurate observations in the biological systems. In this paper, we propose a direct method to reconstruct an axial apparent orthotropic conductivity tensor by using multiple B{sub z} data subject to multiple injection currents. To investigate the anisotropic conductivity properties, we first recover the internal current density from the measured B{sub z} data. From the recovered internal current density and the curl-free condition of the electric field, we derive an over-determined matrix system for determining the internal absolute orthotropic conductivity tensor. The over-determined matrix system is designed to use a combination of two loops around each pixel. Numerical simulations and phantom experimental results demonstrate that the proposed algorithm stably determines the orthotropic conductivity tensor.

  15. Superposition approach for description of electrical conductivity in sheared MWNT/polycarbonate melts

    Directory of Open Access Journals (Sweden)

    M. Saphiannikova

    2012-06-01

    Full Text Available The theoretical description of electrical properties of polymer melts, filled with attractively interacting conductive particles, represents a great challenge. Such filler particles tend to build a network-like structure which is very fragile and can be easily broken in a shear flow with shear rates of about 1 s–1. In this study, measured shear-induced changes in electrical conductivity of polymer composites are described using a superposition approach, in which the filler particles are separated into a highly conductive percolating and low conductive non-percolating phases. The latter is represented by separated well-dispersed filler particles. It is assumed that these phases determine the effective electrical properties of composites through a type of mixing rule involving the phase volume fractions. The conductivity of the percolating phase is described with the help of classical percolation theory, while the conductivity of non-percolating phase is given by the matrix conductivity enhanced by the presence of separate filler particles. The percolation theory is coupled with a kinetic equation for a scalar structural parameter which describes the current state of filler network under particular flow conditions. The superposition approach is applied to transient shear experiments carried out on polycarbonate composites filled with multi-wall carbon nanotubes.

  16. D.C. electrical conductivity and magnetic susceptibility of polythiophene doped with iodine

    Science.gov (United States)

    Chourasia, Ashish B.; Kelkar, Deepali S.

    2013-06-01

    Polythiophene was chemically synthesized, undoped and then re-doped with iodine. FTIR spectra confirm iodine doping. XRD analysis is used to calculate crystallinity of the samples. Electrical conductivity measurements were carried out using two probe technique in the temperature range from 300 K to 373 K. Undoped and doped samples show semi conducting nature. After doping the conductivity increases by eight orders of magnitude at 318 K. Magnetic susceptibility measurements were carried out using Guoy's method, both samples show diamagnetic nature. Conductivity and magnetic susceptibility measurements indicate that predominant charge carriers, in the iodine doped polythiophene, are bipolarons.

  17. Acoustic patterning for 3D embedded electrically conductive wire in stereolithography

    Science.gov (United States)

    Erdem Yunus, Doruk; Sohrabi, Salman; He, Ran; Shi, Wentao; Liu, Yaling

    2017-04-01

    In this paper, we reported a new approach for particle assembly with acoustic tweezers during three-dimensional (3D) printing, for the fabrication of embedded conductive wires with 3D structures. A hexagon shaped acoustic tweezer was incorporated with a digital light processing based stereolithography printer to pattern conductive lines via aligning and condensing conductive nanoparticles. The effect of filler content on electrical resistivity and pattern thickness were studied for copper, magnetite nanoparticles, and carbon nanofiber reinforced nanocomposite samples. The obtained data was later used to produce examples of conductive 3D microstructures and embedded electronic components by using the suggested method.

  18. Cu₃(hexaiminotriphenylene)₂: an electrically conductive 2D metal-organic framework for chemiresistive sensing.

    Science.gov (United States)

    Campbell, Michael G; Sheberla, Dennis; Liu, Sophie F; Swager, Timothy M; Dincă, Mircea

    2015-03-27

    The utility of metal-organic frameworks (MOFs) as functional materials in electronic devices has been limited to date by a lack of MOFs that display high electrical conductivity. Here, we report the synthesis of a new electrically conductive 2D MOF, Cu3(HITP)2 (HITP=2,3,6,7,10,11-hexaiminotriphenylene), which displays a bulk conductivity of 0.2 S cm(-1) (pellet, two-point-probe). Devices synthesized by simple drop casting of Cu3(HITP)2 dispersions function as reversible chemiresistive sensors, capable of detecting sub-ppm levels of ammonia vapor. Comparison with the isostructural 2D MOF Ni3(HITP)2 shows that the copper sites are critical for ammonia sensing, indicating that rational design/synthesis can be used to tune the functional properties of conductive MOFs.

  19. Analysis of variance on thickness and electrical conductivity measurements of carbon nanotube thin films

    Science.gov (United States)

    Li, Min-Yang; Yang, Mingchia; Vargas, Emily; Neff, Kyle; Vanli, Arda; Liang, Richard

    2016-09-01

    One of the major challenges towards controlling the transfer of electrical and mechanical properties of nanotubes into nanocomposites is the lack of adequate measurement systems to quantify the variations in bulk properties while the nanotubes were used as the reinforcement material. In this study, we conducted one-way analysis of variance (ANOVA) on thickness and conductivity measurements. By analyzing the data collected from both experienced and inexperienced operators, we found some operation details users might overlook that resulted in variations, since conductivity measurements of CNT thin films are very sensitive to thickness measurements. In addition, we demonstrated how issues in measurements damaged samples and limited the number of replications resulting in large variations in the electrical conductivity measurement results. Based on this study, we proposed a faster, more reliable approach to measure the thickness of CNT thin films that operators can follow to make these measurement processes less dependent on operator skills.

  20. Electric conductivity and aggregation of anthracite and graphite particles in concretes

    Energy Technology Data Exchange (ETDEWEB)

    E.A. Fanina; A.N. Lopanov [Belgorod State Technological University, Belgorod (Russian Federation)

    2009-02-15

    A statistical model of the electric conductivity of a heterogeneous system based on coal and a binding agent is presented. In this system, a conductive phase appears because of particle aggregation. The model was tested in the systems of anthracite and graphite in cement stone. The consistency between the experimental and calculated electric conductivities with a correlation coefficient higher than 0.9 was found on a linear interpolation of model parameters. It was found that the presence of a surfactant (cetylpyridinium chloride) and a high-molecular-weight compound (polyvinyl acetate) changed the number of particles in anthracite and graphite aggregates to affect the specific conductivity of the heterogeneous system. 9 refs., 5 figs., 1 tab.

  1. Reversible switching of electrical conductivity in an AOT-isooctane-water microemulsion via photoisomerization of azobenzene.

    Science.gov (United States)

    Bufe, Markus; Wolff, Thomas

    2009-07-21

    The electrical conductivity of microemulsions composed of aerosol OT (AOT), isooctane, and water as a function of temperature was studied in the absence and presence of azobenzene, and consequences of an in situ trans-cis photoisomerization of azobenzene were investigated. A conductivity onset upon raising the temperature of a water-in-oil microemulsion indicates percolation. Small amounts (0.1-5% w/w) of solubilized azobenzene induce higher percolation temperatures T(p) (by up to 19 K), and photoisomerization of azobenzene shifts T(p) back to values that may be below T(p) in the absence of azobenzene. Consequently, the microemulsion can be switched from nonconducting to conducting by exposing samples to UV-light at lambda > 310 nm, without varying temperature or composition. The effect reverts within several minutes after turning off the irradiation lamp through thermal reisomerization. By that, reversible switching of electrical conductivity is brought about.

  2. Study of Electrical Conduction Mechanism of Organic Double-Layer Diode Using Electric Field Induced Optical Second Harmonic Generation Measurement.

    Science.gov (United States)

    Nishi, Shohei; Taguchi, Dai; Manaka, Takaaki; Iwamoto, Mitsumasa

    2016-04-01

    By using electric field induced optical second harmonic generation (EFISHG) and current voltage (I-V) measurements, we studied the electrical transport mechanism of organic double-layer diodes with a structure of Au/N, N'-di-[(1-naphthyl)-N, N'-diphenyl]-(1,1'-biphenyl)-4,4'-diamine (a-NPD)/poly(methyl methacrylate) (PMMA)/indium zinc oxide (IZO). Here the α-NPD is a carrier transport layer and the PMMA is an electrical insulating layer. The current level was very low, but the I-V characteristics showed a rectifying behavior. The EFISHG measurement selectively and directly probed the electric field across the α-NPD layer, and showed that the electric field across the a-NPD layer is completely relaxed owing to the charge accumulation at the a-NPD/PMMA interface in the region V > 0, whereas the carrier accumulation was not significant in the region V < 0. On the basis of these experimental results, we proposed a model of the rectification. Further, by coupling the I-V characteristics with the EFISHG measurement, the I-V characteristics of the diodes were well converted into the current-electric field (I-E) characteristics of the α-NPD layer and the PMMA layer. The I-E characteristics suggested the Schottky-type conduction governs the carrier transport. We conclude that the I-V measurement coupled with the EFISHG measurement is very useful to study carrier transport mechanism of the organic double-layer diodes.

  3. Electrical properties of polypropylene-based composites controlled by multilayered distribution of conductive particles.

    Science.gov (United States)

    Gao, Wanli; Zheng, Yu; Shen, Jiabin; Guo, Shaoyun

    2015-01-28

    Materials consisting of alternating layers of pure polypropylene (PP) and carbon black filled polypropylene (PPCB) were fabricated in this work. The electrical behaviors of the multilayered composites were investigated from two directions: (1) Parallel to interfaces. The confined layer space allowed for a more compact connection between CB particles, while the conductive pathways tended to be broken up with increasing number of layers leading to a distinct enhancement of the electrical resistivity due to the separation of insulated PP layers. (2) Vertical to interfaces. The alternating assemblies of insulated and conductive layers like a parallel-plate capacitor made the electrical conductivity become frequency dependent. Following the layer multiplication process, the dielectric permittivity was significantly enhanced due to the accumulation of electrical charges at interfaces. Thus, as a microwave was incident on the dielectric medium, the interfacial polarization made the main contribution to inherent dissipation of microwave energy, so that the absorbing peak became strengthened when the material had more layers. Furthermore, the layer interfaces in the multilayered system were also effective to inhibit the propagation of cracks in the stretching process, leading to a larger elongation at the break than that of the PP/CB conventional system, which provided a potential route to fabricate electrical materials with optimal mechanical properties.

  4. Large apparent electric size of solid-state nanopores due to spatially extended surface conduction.

    Science.gov (United States)

    Lee, Choongyeop; Joly, Laurent; Siria, Alessandro; Biance, Anne-Laure; Fulcrand, Rémy; Bocquet, Lydéric

    2012-08-08

    Ion transport through nanopores drilled in thin membranes is central to numerous applications, including biosensing and ion selective membranes. This paper reports experiments, numerical calculations, and theoretical predictions demonstrating an unexpectedly large ionic conduction in solid-state nanopores, taking its origin in anomalous entrance effects. In contrast to naive expectations based on analogies with electric circuits, the surface conductance inside the nanopore is shown to perturb the three-dimensional electric current streamlines far outside the nanopore in order to meet charge conservation at the pore entrance. This unexpected contribution to the ionic conductance can be interpreted in terms of an apparent electric size of the solid-state nanopore, which is much larger than its geometric counterpart whenever the number of charges carried by the nanopore surface exceeds its bulk counterpart. This apparent electric size, which can reach hundreds of nanometers, can have a major impact on the electrical detection of translocation events through nanopores, as well as for ionic transport in biological nanopores.

  5. Semiconductor structures having electrically insulating and conducting portions formed from an AlSb-alloy layer

    Science.gov (United States)

    Spahn, Olga B.; Lear, Kevin L.

    1998-01-01

    A semiconductor structure. The semiconductor structure comprises a plurality of semiconductor layers formed on a substrate including at least one layer of a III-V compound semiconductor alloy comprising aluminum (Al) and antimony (Sb), with at least a part of the AlSb-alloy layer being chemically converted by an oxidation process to form superposed electrically insulating and electrically conducting portions. The electrically insulating portion formed from the AlSb-alloy layer comprises an oxide of aluminum (e.g. Al.sub.2 O.sub.3), while the electrically conducting portion comprises Sb. A lateral oxidation process allows formation of the superposed insulating and conducting portions below monocrystalline semiconductor layers for forming many different types of semiconductor structures having particular utility for optoelectronic devices such as light-emitting diodes, edge-emitting lasers, vertical-cavity surface-emitting lasers, photodetectors and optical modulators (waveguide and surface normal), and for electronic devices such as heterojunction bipolar transistors, field-effect transistors and quantum-effect devices. The invention is expected to be particularly useful for forming light-emitting devices for use in the 1.3-1.6 .mu.m wavelength range, with the AlSb-alloy layer acting to define an active region of the device and to effectively channel an electrical current therein for efficient light generation.

  6. Structuring and Electric Conductivity of Polymer Composites Pyrolysed at High Temperatures

    Directory of Open Access Journals (Sweden)

    Aneli Jimsher N.

    2014-09-01

    Full Text Available The new conductive monolithic materials have been created on the basis of phenolformaldehyde mixtures and epoxy resins at the presence of some silicon organic compounds and fiber glasses annealed in vacuum and hydrogen media. The conductive, magnetic and some other properties of these materials were investigated. It is proved experimentally that the obtained products are characterized by semi-conductive properties, the level of conductivity and conductive type of which, are regulated by the selection of technological methods. The density and mobility of carriers can be increased by increasing the annealing temperature up to definite levels. The temperature dependence of the electrical conductivity and charge mobility are described by Mott formulas. The magnetic properties of the annealed materials are investigated by ESR method. It is established that in the annealing process free radicals and other paramagnetic centers are formed. On the basis of obtained results it is proposed to form the conducting clusters for transporting the charge between them.

  7. Microstructure, electrical conductivity and modulus spectra of CdI2 doped nanocomposite-electrolytes

    Science.gov (United States)

    Kundu, Ranadip; Roy, Debasish; Bhattacharya, Sanjib

    2017-02-01

    Ionic conductivity and dielectric behavior of Ag2O-CdI2-CdO nanocomposite system have been studied. X-ray diffraction has been carried out to obtain the crystallite sizes and the growth of CdO dispersed in glass-matrices. Total conductivity of them shows thermally activated nature. It is observed that total conductivity decreases and corresponding activation energy for conduction follows opposite behavior. The high-frequency ac conductivity may correspond to a nonrandom, correlated and sub-diffusive motion of Ag+ ions. Conductivity relaxation time is found to increase. The nature of scaling of the conductivity as well as modulus spectra indicates that the electrical relaxation of Ag+ is temperature independent but depends upon composition.

  8. Microstructure, electrical conductivity and modulus spectra of CdI{sub 2} doped nanocomposite-electrolytes

    Energy Technology Data Exchange (ETDEWEB)

    Kundu, Ranadip [Department of Engineering Sciences and Humanities, Siliguri Institute of Technology, Darjeeeling 734009, West Bengal (India); Department of Mechanical Engineering, Jadavpur University, Jadavpur, Kolkata 700032 (India); Roy, Debasish [Department of Mechanical Engineering, Jadavpur University, Jadavpur, Kolkata 700032 (India); Bhattacharya, Sanjib, E-mail: sanjib_ssp@yahoo.co.in [Department of Engineering Sciences and Humanities, Siliguri Institute of Technology, Darjeeeling 734009, West Bengal (India)

    2017-02-15

    Ionic conductivity and dielectric behavior of Ag{sub 2}O–CdI{sub 2}–CdO nanocomposite system have been studied. X-ray diffraction has been carried out to obtain the crystallite sizes and the growth of CdO dispersed in glass-matrices. Total conductivity of them shows thermally activated nature. It is observed that total conductivity decreases and corresponding activation energy for conduction follows opposite behavior. The high-frequency ac conductivity may correspond to a nonrandom, correlated and sub-diffusive motion of Ag{sup +} ions. Conductivity relaxation time is found to increase. The nature of scaling of the conductivity as well as modulus spectra indicates that the electrical relaxation of Ag{sup +} is temperature independent but depends upon composition.

  9. Electrical conduction mechanism of polyvinyl chloride (PVC)–polymethyl methacrylate (PMMA) blend film

    Indian Academy of Sciences (India)

    R S Gulalkari; Y G Bakale; D K Burghate; V S Deogaonkar

    2007-09-01

    The electrical conduction mechanism in polyvinyl chloride (PVC)–polymethyl methacrylate (PMMA) blend film has been studied at various temperatures in the range 313 K to 353 K. The results are presented in the form of – characteristics. Analysis has been made in the light of Poole–Frenkel, Fowler–Nordheim, Schottky, log() vs. plots and Arrhenius plots. It is observed that, Schottky–Richardson mechanism is primarily responsible for the observed conduction.

  10. Electrical conductivity measurements on gel grown KDP crystals added with urea and thiourea

    Indian Academy of Sciences (India)

    M Priya; C M Padma; T H Freeda; C Mahadevan; C Balasingh

    2001-10-01

    Pure and impurity added (with urea and thiourea) KDP single crystals were grown by the gel method using silica gels. Electrical conductivity measurements were carried out along both the unique axis and perpendicular directions at various temperatures ranging from 30 to 140°C by the conventional two-probe method. The present study shows that the conductivity in KDP crystals, for both the impurities considered, increases with the increase in impurity concentration and temperature. Activation energies were also determined and reported.

  11. D.C. electrical conductivity measurements on ADP single crystals added with simple organic compounds

    Indian Academy of Sciences (India)

    A Anne Assencia; C Mahadevan

    2005-08-01

    Pure and impurity added (with urea and thiourea) ADP single crystals were grown by the free evaporation method. D.C. electrical conductivity measurements were carried out along both the unique axis and perpendicular directions at various temperatures ranging from 40–150°C by the conventional two-probe method. Activation energies were also determined. The present study indicates that the conductivity increases with the increase in impurity concentration and temperature.

  12. Electrical Conduction and Dielectric Breakdown Characteristics of Alkyl Ester Dielectric Fluids obtained from Palm Kernel Oil

    OpenAIRE

    Abdelmalik, A. A.; Fothergill, J; Dodd, S. J.

    2012-01-01

    Naturally occurring palm kernel oil (PKO) and its ester derivatives are being considered as sustainable alternatives to synthetic oils for use as dielectric fluids. This paper reports on their dielectric properties, which have been studied and compared to BS148 mineral oil. The low frequency complex dielectric response of the PKO and its derivatives are related to ionic conduction and electrode polarization phenomena. The purified PKO has an electrical conductivity of 3.04 ?? 10-12 Sm-1 at 30...

  13. Investigations for Thermal and Electrical Conductivity of ABS-Graphene Blended Prototypes.

    Science.gov (United States)

    Singh, Rupinder; Sandhu, Gurleen S; Penna, Rosa; Farina, Ilenia

    2017-07-31

    The thermoplastic materials such as acrylonitrile-butadiene-styrene (ABS) and Nylon have large applications in three-dimensional printing of functional/non-functional prototypes. Usually these polymer-based prototypes are lacking in thermal and electrical conductivity. Graphene (Gr) has attracted impressive enthusiasm in the recent past due to its natural mechanical, thermal, and electrical properties. This paper presents the step by step procedure (as a case study) for development of an in-house ABS-Gr blended composite feedstock filament for fused deposition modelling (FDM) applications. The feedstock filament has been prepared by two different methods (mechanical and chemical mixing). For mechanical mixing, a twin screw extrusion (TSE) process has been used, and for chemical mixing, the composite of Gr in an ABS matrix has been set by chemical dissolution, followed by mechanical blending through TSE. Finally, the electrical and thermal conductivity of functional prototypes prepared from composite feedstock filaments have been optimized.

  14. UNSTEADY PLANE MHD BOUNDARY LAYER FLOW OF A FLUID OF VARIABLE ELECTRICAL CONDUCTIVITY

    Directory of Open Access Journals (Sweden)

    Zoran B Boričić

    2010-01-01

    Full Text Available This paper is devoted to the analysis of unsteady plane laminar magnetohydrodynamic (MHD boundary layer flow of incompressible and variable electrical conductivity fluid. The present magnetic field is homogenous and perpendicular to the body surface. Outer electric filed is neglected and magnetic Reynolds number is significantly lower then one i.e. considered problem is in induction-less approximation. Free stream velocity is an arbitrary differentiable function. Fluid electrical conductivity is decreasing function of velocity ratio. In order to solve the described problem multiparametric (generalized similarity method is used and so-called universal equations are obtained. Obtained universal equations are solved numerically in appropriate approximation and a part of obtained results is given in the form of figures and corresponding conclusions.

  15. Electrical conductivity enhancement in thermoplastic polyurethane-graphene nanoplatelet composites by stretch-release cycles

    Science.gov (United States)

    Cataldi, Pietro; Ceseracciu, Luca; Marras, Sergio; Athanassiou, Athanassia; Bayer, Ilker S.

    2017-03-01

    This study shows that electrical conductivity and elastic modulus of conductive thermoplastic elastomers containing graphene nanoplatelets (GnPs) can be significantly enhanced by exposing them to stretch-release cycles, without exceeding 20% of the maximum strain. Although no alignment of GnPs in any specific direction was detected, this enhancement was found to occur due to redistribution of the GnPs within the polymer matrix undergoing repeated stretch-release cycles. Up to 60% of reduction in electrical resistance and 30% enhancement in elastic modulus were measured for certain nanocomposites at the end of 1000 cycles. Processing of such GnP nanocomposites with stretch-release cycles could constitute an innovative approach to enhance their electrical and mechanical properties.

  16. Conductivity enhancement of sulfonated poly(ether ketone ketone) blends using electric field structuring techniques

    Science.gov (United States)

    Gasa, Jeffrey V.; Shaw, Montgomery T.

    2004-03-01

    Binary blends composed of an ion-containing polymer and a secondary component were cast under an applied elec. field to produce membranes with anisotropic morphologies. The ion-containing polymer was sulfonated poly(ether ketone ketone) (SPEKK) and the secondary component was either poly(ether imide) (PEI) or styrene-acrylonitrile (SAN) copolymer. A range of compositions and sulfonation levels were studied using this blend system. Optical and SEM micrographs of the resulting membranes showed columnar structures that were oriented along the direction of the field. It was found that electric field alignment only occurs when SPEKK is the dispersed phase but not when it is the matrix. The results show that the conductivities of the membranes that were cast under an electric field were significantly higher than those of the membranes cast without electric field. The conductivity measurements were interpreted in terms of a composite equation with structure-dependent parameters.

  17. Two-stepped reduction of graphene oxide for improved electrical conductivity for sensor applications

    Science.gov (United States)

    Von Schleusingen, Mubaraq; Ahmad, Mohd Noor

    2017-03-01

    In the last decade graphene, and its derivatives, have received widespread attention for their applications in biotechnology, microelectronics, and other electrical industries. This paper establishes the benefits of a two part reduction procedure for graphene oxide to produce a highly conductive reduced graphene oxide. The procedure utilizes a chemical and microwave treatment to achieve reduction suitable for sensor applications.

  18. Electrical conductivity of molten ZnCl{sub 2} at temperature as high as 1421 K

    Energy Technology Data Exchange (ETDEWEB)

    Salyulev, Alexander B.; Potapov, Alexei M. [RAS Ural Branch, Ekaterinburg. (Russian Federation) Institute of High-Temperature Electrochemistry

    2015-07-01

    The electrical conductivity of molten ZnCl{sub 2} was measured in a wide temperature range (ΔT=863 K) to a temperature as high as 1421 K that is 417 degrees above the boiling point of the salt. At the temperature maximum of the own vapor pressure of the salt reached several megapascals.

  19. New down-hole TDR method for deep profile soil water content and bulk electrical conductivity

    Science.gov (United States)

    Comprehensive irrigation and salinity management both require accurate knowledge of field soil water content and bulk electrical conductivity to depths greater than the root zone depth in agricultural fields. Scientists at the USDA-ARS Conservation & Production Research Laboratory, Bushland, Texas, ...

  20. A Simple Demonstration of the High-Temperature Electrical Conductivity of Glass

    Science.gov (United States)

    Chiaverina, Chris

    2014-01-01

    We usually think of glass as a good electrical insulator; this, however, is not always the case. There are several ways to show that glass becomes conducting at high temperatures, but the following approach, devised by Brown University demonstration manager Gerald Zani, may be one of the simplest to perform.