Processability, Microstruc ture and Impact Properties of Injectionmoulded Poly(oxymethylene)

DEFF Research Database (Denmark)

Laursen, Jens Lolle

I nærværende afhandling undersøges procesafhængigheden af slagstyrken af spsrøjtestøbt poly(oxymethylen), dels via en standardmetode for brudmekanisk karakterisering, dels via en lignende metode baseret på en indstøbt kærv. En sammenligning af de to metoder viser, at sidstnævnte giver et mål, som...

Low-temperature poly(oxymethylene) direct bonding via self-assembled monolayer

Science.gov (United States)

Fu, Weixin; Ma, Bo; Kuwae, Hiroyuki; Shoji, Shuichi; Mizuno, Jun

2018-02-01

A direct bonding of poly(oxymethylene) (POM) was feasible at 100 °C by using self-assembled monolayer (SAM) as a surface modification method. (3-aminopropyl)triethoxysilane (APTES) and (3-glycidyloxypropyl)trimethoxysilane (GOPTS) were used in our work. X-ray photoelectron spectroscopy showed that both APTES and GOPTS modified the POM surface successfully. Bonding strength evaluation revealed that surface modification was affected by pretreatment (VUV/O3) process time. In addition, the bonding condition with highest strength had an average strength of 372 kPa. This technology is expected to be used in packaging for micro-/nano-electromechanical systems, such as biomedical devices.

catena-Poly[[[diaquacopper(II]-μ-2,2′-{[p-phenylenebis(oxymethylene]bis(pyridinium-3,1-diyl}diacetate] dibromide

Directory of Open Access Journals (Sweden)

Wei-Cheng Pan

2010-06-01

Full Text Available The title centrosymmetric coordination polymer, {[Cu(C22H20N2O6(H2O2]Br2}n, formed by the reaction of the flexible double betaine ligand 2,2′-{[p-phenylenebis(oxymethylene]bis(pyridine-3,1-diyl}diacetic acid with CuBr2, contains a Cu(II atom (overline1 symmetry which is surrounded by two water molecules and bridged by two anions in a square-planar coordination. In the crystal, polymeric zigzag chains are linked via O—H...Br interactions, forming a two-dimensional network extending parallel to (011.

Synthesis of 9,9′-[1,2-Ethanediylbis(oxymethylene]bis-2-amino-1,9-dihydro-6H-purin-6-one, an Impurity of Acyclovir

Directory of Open Access Journals (Sweden)

Juan José Vaquero

2012-07-01

Full Text Available The synthesis of 9,9'-[1,2-ethanediylbis(oxymethylene]bis-2-amino-1,9-dihydro-6H-purin-6-one, a minor impurity of acyclovir, is described. Starting with commercial N-(9-acetyl-6-oxo-1H-purin-2-ylacetamide, the process uses an acid catalysed phase transfer catalysis (PTC process to produce the selective alkylation at the 9 position of the guanine ring.

Effect of tetramethylsilane flow on the deposition and tribological behaviors of silicon doped diamond-like carbon rubbed against poly(oxymethylene)

Science.gov (United States)

Deng, Xingrui; Lim, Yankuang; Kousaka, Hiroyuki; Tokoroyama, Takayuki; Umehara, Noritsugu

2014-11-01

In this study, silicon doped diamond-like carbon (Si-DLC) was deposited on stainless steel (JIS SUS304) by using surface wave-excited plasma (SWP). The effects of tetramethylsilane (TMS) flow on the composition, topography, mechanical properties and tribological behavior were investigated. Pin-on-disc tribo-meter was used to investigate the tribological behavior of the Si-DLC coating rubbed against poly(oxymethylene) (POM). The results show that the deposition rate, roughness of Si-DLC increased and the hardness of Si-DLC decreased with the increase of TMS flow rate from 2 to 4 sccm; the roughness increase therein led to the increase of ploughing term of friction. The increase of adhesion term was also seen with the increase of TMS flow rate, being attributed to the decrease of hydrogen concentration in the coating. It was considered that more POM transferred onto the Si-DLC deposited at higher TMS flow rate due to larger heat generation by friction.

Journal of Chemical Sciences | Indian Academy of Sciences

Indian Academy of Sciences (India)

trihydroxybenzene as a core unit, interconnecting three Schiff base or azobenzene moieties via oxymethylene spacers have been synthesized and characterized by spectroscopic techniques. Every member in these series possesses either ...

Journal of Chemical Sciences | Indian Academy of Sciences

Indian Academy of Sciences (India)

oxymethylene ethers) from alcohols and paraformaldehyde in the presence of commercially available nickel(II) salt is described. The reaction proceeds readily under neutral, solvent-free conditions using paraformaldehyde as a C1 source.

new glucopyranosylglyceryl-n-octenyl adipate and bioactivity of retro

African Journals Online (AJOL)

dell

oxymethylene oxygen atoms, and to the rest of the molecule ..... The agar diffusion method was used to determine both the ..... Luminometer at 37 oC and light emission was recorded ..... Zweier J and Trush MA 1998 Validation of Lucigenin ...

Quantitative NMR spectroscopy of binary liquid mixtures (aldehyde + alcohol) Part I: Acetaldehyde + (methanol or ethanol or 1-propanol)

International Nuclear Information System (INIS)

Jaubert, Silke; Maurer, Gerd

2014-01-01

Highlights: • Formation of hemiacetal/poly(oxymethylene) hemiacetals in liquid binary mixtures. • Acetaldehyde and a low molecular alcohol (methanol or ethanol or 1-propanol). • Quantitative 13 C NMR spectroscopy at temperatures between (255 and 295) K. • Hemiacetals are the predominant species. • (Acetaldehyde + methanol (50 + 50)) at 255 K: hemiacetal (polymers) >80% (≈10%). -- Abstract: Aldehydes react with alcohols to hemiacetals and poly(oxymethylene) hemiacetals. The chemical reaction equilibria of such reactions, in particular in the liquid state, can have an essential influence on the thermodynamic properties and related phenomena like, for example, on the vapour + liquid phase equilibrium. Therefore, thermodynamic models that aim to describe quantitatively such phase equilibria have to consider the chemical reaction equilibrium in the coexisting phases. This is well known in the literature for systems such as, for example, formaldehyde and methanol. However, experimental information on the chemical reaction equilibria in mixtures with other aldehydes (than formaldehyde) and alcohols is extremely scarce. Therefore, quantitative NMR spectroscopy was used to investigate the chemical reaction equilibria in binary mixtures of acetaldehyde and a single alcohol (here either methanol, ethanol or 1-propanol) at temperatures between (255 and 295) K. The results reveal that the majority of the constituents of the mixture is present as hemiacetal and the first two poly(oxymethylene) hemiacetals: in an equimolar mixture of (acetaldehyde + methanol or ethanol or 1-propanol), between about 90% at T = 255 K and about 75% at 295 K. The mole-fraction based chemical reaction equilibrium constants for the formation of those species were determined and some derived properties are reported

The polymerization of furfuryl alcohol with p-toluenesulfonic acid: photo cross-linkable feature of the polymer

International Nuclear Information System (INIS)

Principe, Martha; Martinez, Ricardo; Ortiz, Pedro; Rieumont, Jacques

2000-01-01

Poly (furfuryl alcohol) with different amounts of oxymethylenic bridges was synthesized using trifluoroacetic and p-toluenesulfonic acid. All polymers displayed a tendency to retain acids. The isolated products containing traces of acid became insoluble in a few hours; while neutral material maintains theirs solubility for at least one month. Polymers stored in solution were stable according to their HNMR spectra. Polymers cross-linked after being exposed to UV radiation. The product of the reaction of polymer with maleic anhydride is useful for preparing negative photo resists. (author)

Two dimensional solid state NMR

International Nuclear Information System (INIS)

Kentgens, A.P.M.

1987-01-01

This thesis illustrates, by discussing some existing and newly developed 2D solid state experiments, that two-dimensional NMR of solids is a useful and important extension of NMR techniques. Chapter 1 gives an overview of spin interactions and averaging techniques important in solid state NMR. As 2D NMR is already an established technique in solutions, only the basics of two dimensional NMR are presented in chapter 2, with an emphasis on the aspects important for solid spectra. The following chapters discuss the theoretical background and applications of specific 2D solid state experiments. An application of 2D-J resolved NMR, analogous to J-resolved spectroscopy in solutions, to natural rubber is given in chapter 3. In chapter 4 the anisotropic chemical shift is mapped out against the heteronuclear dipolar interaction to obtain information about the orientation of the shielding tensor in poly-(oxymethylene). Chapter 5 concentrates on the study of super-slow molecular motions in polymers using a variant of the 2D exchange experiment developed by us. Finally chapter 6 discusses a new experiment, 2D nutation NMR, which makes it possible to study the quadrupole interaction of half-integer spins. 230 refs.; 48 figs.; 8 tabs

Identification of Di(oxymethylene)glycol in the Raman Spectrum of Formaldehyde Aqueous Solutions by ab lnitio Molecular Dynamics Simulations and Quantum Chemistry Calculations

Czech Academy of Sciences Publication Activity Database

Delcroix, Pauline; Pagliai, M.; Cardini, G.; Bégué, D.; Hanoune, B.

2015-01-01

Roč. 119, č. 38 (2015), s. 9785-9793 ISSN 1089-5639 Institutional support: RVO:61388963 Keywords : hydrogen bond dynamics * chemical equilibria * liquid water Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 2.883, year: 2015

Synthesis and Characterization of a Novel Polyacetal & Design and Preparation of Superhydrophobic Photocatalytic Surfaces

Science.gov (United States)

Zhao, Yuanyuan

Acetal copolymers represent a family of well-established engineering thermoplastics serving a broad range of important industrial applications including replacement for metals. The first part of this thesis describes the first synthesis of an eight-member ring acetal, 6-methyl-1, 3-dioxocane (MDOC), and its cationic copolymerization with trioxane initiated by boron trifluoride dibutyl etherate. The copolymerization process was monitored in situ using proton NMR. Incorporation of MDOC led to the insertion of the "stopper" unit, "--[CH2CH2CH(CH3)CH 2CH2)O]--", thus synthesizing the new acetal copolymer. A superior copolymer thermal stability with a ~ 20oC increase in degradation onset temperature compared with end-capped polyoxmethylene was observed. Both TGA and DSC data indicated the random placement of the "stopper" in the copolymer likely due to efficient transacetalization because of the higher basicity and flexibility of the stopper unit compared with co-units comprising 2 to 4 carbons in length. DSC thermo-grams showed a melting curve of a polymer with melting point lower, as expected, than that of oxymethylene homopolymer. No homopolymer in the copolymer samples was in indicated by TGA. The new acetal copolymer, poly(6-methyl-1,3-dioxocane-co-trioxane), which has a "stopper" co-unit with five carbon atoms along the backbone, contains the longest reported stopper co-unit, potentially leading to improved elongation, and toughness and better compatibility with a range of additives compared to acetal homopolymers.. Chapter 3 presents a novel lamination fabrication method that enables pre-formed TiO2 nanoparticles to become partially embedded in the surface of a thermoplastic polymer film. In this way, the particles are strongly adhered to the surface while remaining accessible to the aqueous solution. By modifying the fabrication conditions (e.g. temperature, pressure, polymer melt viscosity, etc.), the morphology of the hierarchical TiO2-polymer surface can be