WorldWideScience

Sample records for oxygen technology survey

  1. ASRDI oxygen technology survey. Volume 5: Density and liquid level measurement instrumentation for the cryogenic fluids oxygen, hydrogen, and nitrogen

    Science.gov (United States)

    Roder, H. M.

    1974-01-01

    Information is presented on instrumentation for density measurement, liquid level measurement, quantity gauging, and phase measurement. Coverage of existing information directly concerned with oxygen was given primary emphasis. A description of the physical principle of measurement for each instrumentation type is included. The basic materials of construction are listed if available from the source document for each instrument discussed. Cleaning requirements, procedures, and verification techniques are included.

  2. Integral Field Spectroscopy Surveys: Oxygen Abundance Gradients

    Science.gov (United States)

    Sánchez, S. F.; Sánchez-Menguiano, L.

    2017-07-01

    We present here the recent results on our understanding of oxygen abundance gradients derived using Integral Field Spectroscopic surveys. In particular we analyzed more than 2124 datacubes corresponding to individual objects observed by the CALIFA (˜ 734 objects) and the public data by MaNGA (˜ 1390 objects), deriving the oxygen abundance gradient for each galaxy. We confirm previous results that indicate that the shape of this gradient is very similar for all galaxies with masses above 109.5M⊙, presenting in average a very similar slope of ˜ -0.04 dex within 0.5-2.0 re, with a possible drop in the inner regions (r109.5M⊙) the gradient seems to be flatter than for more massive ones. All these results agree with an inside-out growth of massive galaxies and indicate that low mass ones may still be growing in an outside in phase.

  3. Experimental study on ceramic membrane technology for onboard oxygen generation

    OpenAIRE

    Jiang Dongsheng; Bu Xueqin; Sun Bing; Lin Guiping; Zhao Hongtao; Cai Yan; Fang Ling

    2016-01-01

    The ceramic membrane oxygen generation technology has advantages of high concentration of produced oxygen and potential nuclear and biochemical protection capability. The present paper studies the ceramic membrane technology for onboard oxygen generation. Comparisons are made to have knowledge of the effects of two kinds of ceramic membrane separation technologies on oxygen generation, namely electricity driven ceramic membrane separation oxygen generation technology (EDCMSOGT) and pressure d...

  4. Experimental study on ceramic membrane technology for onboard oxygen generation

    Directory of Open Access Journals (Sweden)

    Jiang Dongsheng

    2016-08-01

    Full Text Available The ceramic membrane oxygen generation technology has advantages of high concentration of produced oxygen and potential nuclear and biochemical protection capability. The present paper studies the ceramic membrane technology for onboard oxygen generation. Comparisons are made to have knowledge of the effects of two kinds of ceramic membrane separation technologies on oxygen generation, namely electricity driven ceramic membrane separation oxygen generation technology (EDCMSOGT and pressure driven ceramic membrane separation oxygen generation technology (PDCMSOGT. Experiments were conducted under different temperatures, pressures of feed air and produced oxygen flow rates. On the basis of these experiments, the flow rate of feed air, electric power provided, oxygen recovery rate and concentration of produced oxygen are compared under each working condition. It is concluded that the EDCMSOGT is the oxygen generation means more suitable for onboard conditions.

  5. RECENT PROGRESS OF OXYGEN/NITROGEN SEPARATION USING MEMBRANE TECHNOLOGY

    OpenAIRE

    K. C. CHONG; S. O. LAI; H. S. THIAM; H. C. TEOH; S. L. HENG

    2016-01-01

    The oxygen-enriched air is highly demanded for various industrial applications such as medical, chemical and enhanced combustion processes. The conventional oxygen/nitrogen production is either cryogenic distillation or pressure swing adsorption (PSA). Both of these techniques possess the production capability of 20 to 300 tonnes of oxygen per day and oxygen purity of more than 95%. However, these techniques are energy intensive. Alternatively, membrane technology is an emerging technology...

  6. Oxygenic photosynthesis: translation to solar fuel technologies

    Directory of Open Access Journals (Sweden)

    Julian David Janna Olmos

    2014-12-01

    Full Text Available Mitigation of man-made climate change, rapid depletion of readily available fossil fuel reserves and facing the growing energy demand that faces mankind in the near future drive the rapid development of economically viable, renewable energy production technologies. It is very likely that greenhouse gas emissions will lead to the significant climate change over the next fifty years. World energy consumption has doubled over the last twenty-five years, and is expected to double again in the next quarter of the 21st century. Our biosphere is at the verge of a severe energy crisis that can no longer be overlooked. Solar radiation represents the most abundant source of clean, renewable energy that is readily available for conversion to solar fuels. Developing clean technologies that utilize practically inexhaustible solar energy that reaches our planet and convert it into the high energy density solar fuels provides an attractive solution to resolving the global energy crisis that mankind faces in the not too distant future. Nature’s oxygenic photosynthesis is the most fundamental process that has sustained life on Earth for more than 3.5 billion years through conversion of solar energy into energy of chemical bonds captured in biomass, food and fossil fuels. It is this process that has led to evolution of various forms of life as we know them today. Recent advances in imitating the natural process of photosynthesis by developing biohybrid and synthetic “artificial leaves” capable of solar energy conversion into clean fuels and other high value products, as well as advances in the mechanistic and structural aspects of the natural solar energy converters, photosystem I and photosystem II, allow to address the main challenges: how to maximize solar-to-fuel conversion efficiency, and most importantly: how to store the energy efficiently and use it without significant losses. Last but not least, the question of how to make the process of solar

  7. The development of zirconia membrane oxygen separation technology

    International Nuclear Information System (INIS)

    Chiacchi, F.T.; Badwal, S.P.S.; Velizko, V.

    2000-01-01

    The oxygen separation technology based on ceramic membranes constructed from stabilised zirconia is currently under development for applications ranging from oxygen generation or air enrichment for medical use to control of oxygen concentration or oxygen removal from gas streams and enclosures for semiconductor, food packaging and process control instrumentation industries. The technology is based on a rugged tubular design with extensive thermal cycling capability. Several single and three tube devices have been operated for periods up to 5000h. An eight tube module, as a building block for larger scale oxygen production or removal devices, has been constructed and is being evaluated. In this paper, the construction of the device, oxygen generating capacity, life time tests and performance of the ceramic membrane device under development at CSIRO will be discussed. Copyright (2000) The Australian Ceramic Society

  8. General survey of technology management

    Energy Technology Data Exchange (ETDEWEB)

    Shin, Yong Ha; Jang Dong Hun; Lee, In Woo

    1999-02-15

    The content of this book are technology and management, conception of technology management, feature and model of technology management system, elements of technology management, performance measurement of technology management, connectivity between technology and business function, system management of technology, manpower management, readership and technology management, motivation and technology management, management of technical investment evaluation, new item development and marketing, product liability management, intellectual property rights and transfer of technology.

  9. General survey of technology management

    International Nuclear Information System (INIS)

    Shin, Yong Ha; Jang Dong Hun; Lee, In Woo

    1999-02-01

    The content of this book are technology and management, conception of technology management, feature and model of technology management system, elements of technology management, performance measurement of technology management, connectivity between technology and business function, system management of technology, manpower management, readership and technology management, motivation and technology management, management of technical investment evaluation, new item development and marketing, product liability management, intellectual property rights and transfer of technology.

  10. The Development of Precise Engineering Surveying Technology

    Directory of Open Access Journals (Sweden)

    LI Guangyun

    2017-10-01

    Full Text Available With the construction of big science projects in China, the precise engineering surveying technology developed rapidly in the 21th century. Firstly, the paper summarized up the current development situation for the precise engineering surveying instrument and theory. Then the three typical cases of the precise engineering surveying practice such as accelerator alignment, industry measurement and high-speed railway surveying technology are focused.

  11. Drilling technologies in hydrogeological survey

    OpenAIRE

    Vorlíček, Petr

    2014-01-01

    This work deals with the drilling technologies used in hydrogeology. The main aim of the work is to explore types of drilling technologies used at hydrogeological drilling wells and modern technologies that could potentially be used in the future. The work also summarizes a historical development of drilling techniques, a drilling process procedure, information obtained from boreholes and the most common types of drilling fluids.

  12. Electrochemical extraction of oxygen using PEM electrolysis technology

    Directory of Open Access Journals (Sweden)

    BOULBABA ELADEB

    2012-11-01

    Full Text Available Electrochemical extraction of oxygen from air can be carried out by chemical reduction of oxygen at the cathode and simultaneous oxygen evolution by water anode oxidation. The present investigation deals with the use of an electrolysis cell of PEM technology for this purpose. A dedicated 25 cm2 cell provided with a commercial water electrolysis MEA and titanium grooved plates has been designed for continuous operation at pressures close to the ambient level. The MEA consisted of a Nafion 117 membrane sandwiched between a Pt/C cathode and a non-supported Pt-Ir anode. Oxygen partial consumption in long-term runs was evaluated by analysis of the outlet air by gas chromatography, depending on the cell voltage - or the current density - and the excess in air oxygen fed to the cathode. Runs over more 50 hours indicated the relative stability of the components used for current densities ranging from 0.1 to 0.2 A cm-2 with high efficiency of oxygen reduction. Higher current density could be envisaged with more efficient MEA’s, exhibiting lower overpotentials for oxygen evolution to avoid too significant degradation of the anode material and the membrane. Interpretation of the data has been carried out by calculation of the cathode current efficiency.

  13. RECENT PROGRESS OF OXYGEN/NITROGEN SEPARATION USING MEMBRANE TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    K. C. CHONG

    2016-07-01

    Full Text Available The oxygen-enriched air is highly demanded for various industrial applications such as medical, chemical and enhanced combustion processes. The conventional oxygen/nitrogen production is either cryogenic distillation or pressure swing adsorption (PSA. Both of these techniques possess the production capability of 20 to 300 tonnes of oxygen per day and oxygen purity of more than 95%. However, these techniques are energy intensive. Alternatively, membrane technology is an emerging technology in gas separation as it requires low energy consumption and relatively moderate production volume, if compared to the conventional gas production techniques. These advantages have spurred much interest from industries and academics to speed up the commercial viability of the O2/N2 separation via membrane technology. In this review, the conventional and membrane technologies in O2/N2 separation, as well as recent development of membrane fabrication techniques and materials are reviewed. The latest membrane performance in O2/N2 separation is also tabulated and discussed.

  14. International survey on gas technology organizations

    International Nuclear Information System (INIS)

    1994-11-01

    The International Survey on Gas Technology Organizations has been prepared by the IEA International Centre for Gas Technology Information. 172 companies and R and D Institutions from 41 countries have contributed to the survey. The objective of the Survey is to develop an overview of identified organizations active in the development of new gas technology. As a quick reference guide the survey offers you short descriptions of a number of the most important organizations within gas technology on a world wide basis. Many R and D institutions around the world are working with topics of relevance to the gas industry. New gas technology draws on many different scientific and technical disciplines. This first issue of the survey includes only a part of the numerous organizations and institutions active within the development of new technology of relevance to the gas industry. The preparation of this survey has been a first step in the development of the information activities of the Centre. The information regarding organizations with R and D activities of relevance to the gas industry will continuously be expanded and updated for internal use in the Centre and will also be available to external users. The Centre plans to establish on-line access to these update versions during 1995. (EG)

  15. Technological advances in extracorporeal membrane oxygenation for respiratory failure.

    Science.gov (United States)

    Rehder, Kyle J; Turner, David A; Bonadonna, Desiree; Walczak, Richard J; Rudder, Robert J; Cheifetz, Ira M

    2012-08-01

    Extracorporeal membrane oxygenation (ECMO) for neonatal and pediatric cardiac and/or respiratory failure is well established, and its use for adult respiratory failure is rapidly increasing. Management strategies developed over the past 30 years coupled with significant recent technological advances have led to improved ECMO survival. These new technologies are expanding the potential applications for ECMO in exciting ways, including new patient populations and the ability to make ECMO mobile for both intra- and inter-hospital transport. In this article, we highlight some of the recent technological advances and their impact on the utilization of ECMO in increasingly diverse patient populations.

  16. A Survey of Hadron Therapy Accelerator Technologies.

    Energy Technology Data Exchange (ETDEWEB)

    PEGGS,S.; SATOGATA, T.; FLANZ, J.

    2007-06-25

    Hadron therapy has entered a new age [1]. The number of facilities grows steadily, and 'consumer' interest is high. Some groups are working on new accelerator technology, while others optimize existing designs by reducing capital and operating costs, and improving performance. This paper surveys the current requirements and directions in accelerator technology for hadron therapy.

  17. Emerging Technology Domains Risk Survey

    Science.gov (United States)

    2015-04-01

    Success 22 11.6 Exploitation Examples 22 11.7 Triage Table 22 12 Vehicle Autonomy ( Driverless Cars) 23 12.1 Introduction 23 12.2 Recommendation 24... Driverless Cars) 12.1 Introduction Autonomous vehicles have the ability to move without direct commands from an operator. They can navigate to a...lifestyle, and likely adoption mean that driverless cars will become an incredibly important technology. In addition, the potential for human harm and

  18. 2017 Emerging Technology Domains Risk Survey

    Science.gov (United States)

    2017-10-01

    REV-03.18.2016.0 2017 Emerging Technology Domains Risk Survey Daniel Klinedinst Joel Land Kyle O’Meara October 2017 TECHNICAL REPORT CMU/SEI...Distribution Statement A: Approved for Public Release. Distribution is Unlimited. List of Tables Table 1: New and Emerging Technologies 2 Table 2: Security...Impact of New and Emerging Technologies 4 Table 3: Severity Classifications and Impact Scores 5 CMU/SEI-2017-TR-008 | SOFTWARE ENGINEERING

  19. Development of oxygen sensing technology in an irradiated fuel rod. Characteristic test of oxygen sensor

    International Nuclear Information System (INIS)

    Saito, Junichi; Hoshiya, Taiji; Sakurai, Fumio; Sakai, Haruyuki

    1996-03-01

    At the Department of JMTR (Japan Materials Test Reactor), the re-instrumentation technologies to a high burnup fuel rod irradiated in an LWR have been developed to study irradiation behavior of the fuel during power transient. It has been progressed developing a chemical sensor as one of the re-instrumentation technologies. This report summarizes the results of characteristic tests of an oxygen sensor made of Yttria Stabilized Zirconia (YSZ) as a solid electrolyte. Several kinds of experiments were carried out to evaluate the electromotive force (emf) performance, stability and lifetime of the oxygen sensor with Ni/NiO, Cr/Cr 2 O 3 and Fe/FeO, respectively as a reference electrode. From the experimental data, it is suggested that the reference electrode of Ni/NiO reveals the most appropriate characteristic of the sensor to measure the partial oxygen pressure in a fuel rod. It is the final goal of this development to clarify the change of oxygen chemical potential in a fuel rod during power transient. (author)

  20. Mechanical ventilation during extracorporeal membrane oxygenation. An international survey.

    Science.gov (United States)

    Marhong, Jonathan D; Telesnicki, Teagan; Munshi, Laveena; Del Sorbo, Lorenzo; Detsky, Michael; Fan, Eddy

    2014-07-01

    In patients with severe, acute respiratory failure undergoing venovenous extracorporeal membrane oxygenation (VV-ECMO), the optimal strategy for mechanical ventilation is unclear. Our objective was to describe ventilation practices used in centers registered with the Extracorporeal Life Support Organization (ELSO). We conducted an international cross-sectional survey of medical directors and ECMO program coordinators from all ELSO-registered centers. The survey was distributed using a commercial website that collected information on center characteristics, the presence of a mechanical ventilator protocol, ventilator settings, and weaning practices. E-mails were sent out to medical directors or coordinators at each ELSO center and their responses were pooled for analysis. We analyzed 141 (50%) individual responses from the 283 centers contacted across 28 countries. Only 27% of centers reported having an explicit mechanical ventilation protocol for ECMO patients. The majority of these centers (77%) reported "lung rest" to be the primary goal of mechanical ventilation, whereas 9% reported "lung recruitment" to be their ventilation strategy. A tidal volume of 6 ml/kg or less was targeted by 76% of respondents, and 58% targeted a positive end-expiratory pressure of 6-10 cm H2O while ventilating patients on VV-ECMO. Centers prioritized weaning VV-ECMO before mechanical ventilation. Although ventilation practices in patients supported by VV-ECMO vary across ELSO centers internationally, the majority of centers used a strategy that targeted lung-protective thresholds and prioritized weaning VV-ECMO over mechanical ventilation.

  1. Evolution of Indoor Positioning Technologies: A Survey

    Directory of Open Access Journals (Sweden)

    Ramon F. Brena

    2017-01-01

    Full Text Available Indoor positioning systems (IPS use sensors and communication technologies to locate objects in indoor environments. IPS are attracting scientific and enterprise interest because there is a big market opportunity for applying these technologies. There are many previous surveys on indoor positioning systems; however, most of them lack a solid classification scheme that would structurally map a wide field such as IPS, or omit several key technologies or have a limited perspective; finally, surveys rapidly become obsolete in an area as dynamic as IPS. The goal of this paper is to provide a technological perspective of indoor positioning systems, comprising a wide range of technologies and approaches. Further, we classify the existing approaches in a structure in order to guide the review and discussion of the different approaches. Finally, we present a comparison of indoor positioning approaches and present the evolution and trends that we foresee.

  2. Biomedical sensor for transcutaneous oxygen measurements using thick film technology

    OpenAIRE

    Lam, Yu-Zhi (Liza)

    2003-01-01

    The measurement of the partial pressure of oxygen in arterial blood is essential for the analysis of a patient's respiratory condition. There are several commercially available methods and systems to measure this parameter transcutaneously. However, they tend to be cumbersome and costly. To overcome the disadvantages presented, a new type of sensor for transcutaneous blood gas measurement was investigated, employing thick film technology, which is an excellent technique to produce sensors in ...

  3. Survey of fusion reactor technology

    International Nuclear Information System (INIS)

    Chung, M.K.; Kang, H.D.; Oh, Y.K.; Lee, K.W.; In, S.Y.; Kim, Y.C.

    1983-01-01

    The present object of the fusion research is to accomplish the scientific break even by the year of 1986. In view of current progress in the field of Fusion reactor development, we decided to carry out the conceptual design of Tokamak-type fusion reactor during the year of 82-86 in order to acquire the principles of the fusion devices, find the engineering problems and establish the basic capabilities to develop the key techniques with originality. In this year the methods for calculating the locations of the poloidal coils and distribution of the magnetic field, which is one of the most essential and complicated task in the fusion reactor design works, were established. Study on the optimization of the design method of toroidal field coil was also done. Through this work, we established the logic for the design of the toroidal field coil in tokamak and utilize this technique to the design of small compact tokamak. Apart from the development work as to the design technology of tokamak, accelerating column and high voltage power supply (200 KVDC, 100 mA) for intense D-T neutron generator were constructed and now beam transport systems are under construction. This device will be used to develop the materials and the components for the tokamak fusion reactor. (Author)

  4. Teens, Health and Technology: A National Survey

    OpenAIRE

    Ellen Wartella; Vicky Rideout; Heather Montague; Leanne Beaudoin-Ryan; Alexis Lauricella

    2016-01-01

    In the age of digital technology, as teens seem to be constantly connected online, via social media, and through mobile applications, it is no surprise that they increasingly turn to digital media to answer their health questions. This study is the first of its kind to survey a large, nationally-representative sample of teens to investigate how they use the newest digital technologies, including mobile apps, social networking sites, electronic gaming and wearable devices, to explore health...

  5. Survey Harmonisation with New Technologies Improvement (SHANTI)

    DEFF Research Database (Denmark)

    Kagerbauer, Martin

    The transport sector is one of the major sources of global warming, both from individual travel behaviour (especially car use) and from freight transport (mainly by trucks). Mobility surveys, as well as data collections about travel behaviour, are essential to develop transportation policies...... and measures which encourage more environment-friendly transport modes. Data quality is a real challenge, mainly because response rates are declining and interviewees are more and more reluctant to respond to burdensome questionnaires. Furthermore, harmonized data are a must for authorities, but in Europe...... and positioning technologies including GPS/GALILEO, GSM and Radio Data System (RDS) have advanced rapidly and their costs are decreasing. They demonstrate great potential as survey instruments for tracking individual mobility and travel behaviour as well as freight movements, by enabling to conduct surveys along...

  6. Teens, Health and Technology: A National Survey

    Directory of Open Access Journals (Sweden)

    Ellen Wartella

    2016-06-01

    Full Text Available In the age of digital technology, as teens seem to be constantly connected online, via social media, and through mobile applications, it is no surprise that they increasingly turn to digital media to answer their health questions. This study is the first of its kind to survey a large, nationally-representative sample of teens to investigate how they use the newest digital technologies, including mobile apps, social networking sites, electronic gaming and wearable devices, to explore health topics. The survey covered the types of health topics teens most frequently search for, which technologies they are most likely to use and how they use them, and whether they report having changed their behaviors due to digital health information. In addition, this survey explores how the digital divide continues to impact adolescents. Results of this study indicate that teens are concerned about many health issues, ranging from fitness, sexual activity, drugs, hygiene as well as mental health and stress. As teens virtually always have a digital device at their fingertips, it is clear that public health interventions and informational campaigns must be tailored to reflect the ways that teens currently navigate digital health information and the health challenges that concern them most.

  7. the impact of digital technology revolution on surveying curriculum ...

    African Journals Online (AJOL)

    the impact of digital technology revolution on surveying curriculum review in ... Global Journal of Environmental Sciences ... Also, it focuses on the need to review the current surveying curriculum to meet the technological advancement. Finally ...

  8. Technology survey on video face tracking

    Science.gov (United States)

    Zhang, Tong; Gomes, Herman Martins

    2014-03-01

    With the pervasiveness of monitoring cameras installed in public areas, schools, hospitals, work places and homes, video analytics technologies for interpreting these video contents are becoming increasingly relevant to people's lives. Among such technologies, human face detection and tracking (and face identification in many cases) are particularly useful in various application scenarios. While plenty of research has been conducted on face tracking and many promising approaches have been proposed, there are still significant challenges in recognizing and tracking people in videos with uncontrolled capturing conditions, largely due to pose and illumination variations, as well as occlusions and cluttered background. It is especially complex to track and identify multiple people simultaneously in real time due to the large amount of computation involved. In this paper, we present a survey on literature and software that are published or developed during recent years on the face tracking topic. The survey covers the following topics: 1) mainstream and state-of-the-art face tracking methods, including features used to model the targets and metrics used for tracking; 2) face identification and face clustering from face sequences; and 3) software packages or demonstrations that are available for algorithm development or trial. A number of publically available databases for face tracking are also introduced.

  9. Space Technology Game Changing Development- Next Generation Life Support: Spacecraft Oxygen Recovery (SCOR)

    Science.gov (United States)

    Abney, Morgan; Barta, Daniel

    2015-01-01

    The Next Generation Life Support Spacecraft Oxygen Recovery (SCOR) project element is dedicated to developing technology that enables oxygen recovery from metabolically produced carbon dioxide in space habitats. The state-of-the-art system on the International Space Station uses Sabatier technology to recover (is) approximately 50% oxygen from carbon dioxide. The remaining oxygen required for crew respiration is supplied from Earth. For long duration manned missions beyond low-Earth orbit, resupply of oxygen becomes economically and logistically prohibitive. To mitigate these challenges, the SCOR project element is targeting development of technology to increase the recovery of oxygen to 75% or more, thereby reducing the total oxygen resupply required for future missions.

  10. Survey on Multimedia Technologies for Mobile Learning Applications

    Directory of Open Access Journals (Sweden)

    Paul POCATILU

    2009-01-01

    Full Text Available Mobile technologies are developing very fast. This paper presents a survey on multimedia technologies for mobile learning applications, focusing on multimedia programming techniques for Windows Mobile, Symbian, and Java ME.

  11. Big Data: Survey, Technologies, Opportunities, and Challenges

    Directory of Open Access Journals (Sweden)

    Nawsher Khan

    2014-01-01

    Full Text Available Big Data has gained much attention from the academia and the IT industry. In the digital and computing world, information is generated and collected at a rate that rapidly exceeds the boundary range. Currently, over 2 billion people worldwide are connected to the Internet, and over 5 billion individuals own mobile phones. By 2020, 50 billion devices are expected to be connected to the Internet. At this point, predicted data production will be 44 times greater than that in 2009. As information is transferred and shared at light speed on optic fiber and wireless networks, the volume of data and the speed of market growth increase. However, the fast growth rate of such large data generates numerous challenges, such as the rapid growth of data, transfer speed, diverse data, and security. Nonetheless, Big Data is still in its infancy stage, and the domain has not been reviewed in general. Hence, this study comprehensively surveys and classifies the various attributes of Big Data, including its nature, definitions, rapid growth rate, volume, management, analysis, and security. This study also proposes a data life cycle that uses the technologies and terminologies of Big Data. Future research directions in this field are determined based on opportunities and several open issues in Big Data domination. These research directions facilitate the exploration of the domain and the development of optimal techniques to address Big Data.

  12. Big data: survey, technologies, opportunities, and challenges.

    Science.gov (United States)

    Khan, Nawsher; Yaqoob, Ibrar; Hashem, Ibrahim Abaker Targio; Inayat, Zakira; Ali, Waleed Kamaleldin Mahmoud; Alam, Muhammad; Shiraz, Muhammad; Gani, Abdullah

    2014-01-01

    Big Data has gained much attention from the academia and the IT industry. In the digital and computing world, information is generated and collected at a rate that rapidly exceeds the boundary range. Currently, over 2 billion people worldwide are connected to the Internet, and over 5 billion individuals own mobile phones. By 2020, 50 billion devices are expected to be connected to the Internet. At this point, predicted data production will be 44 times greater than that in 2009. As information is transferred and shared at light speed on optic fiber and wireless networks, the volume of data and the speed of market growth increase. However, the fast growth rate of such large data generates numerous challenges, such as the rapid growth of data, transfer speed, diverse data, and security. Nonetheless, Big Data is still in its infancy stage, and the domain has not been reviewed in general. Hence, this study comprehensively surveys and classifies the various attributes of Big Data, including its nature, definitions, rapid growth rate, volume, management, analysis, and security. This study also proposes a data life cycle that uses the technologies and terminologies of Big Data. Future research directions in this field are determined based on opportunities and several open issues in Big Data domination. These research directions facilitate the exploration of the domain and the development of optimal techniques to address Big Data.

  13. Big Data: Survey, Technologies, Opportunities, and Challenges

    Science.gov (United States)

    Khan, Nawsher; Yaqoob, Ibrar; Hashem, Ibrahim Abaker Targio; Inayat, Zakira; Mahmoud Ali, Waleed Kamaleldin; Alam, Muhammad; Shiraz, Muhammad; Gani, Abdullah

    2014-01-01

    Big Data has gained much attention from the academia and the IT industry. In the digital and computing world, information is generated and collected at a rate that rapidly exceeds the boundary range. Currently, over 2 billion people worldwide are connected to the Internet, and over 5 billion individuals own mobile phones. By 2020, 50 billion devices are expected to be connected to the Internet. At this point, predicted data production will be 44 times greater than that in 2009. As information is transferred and shared at light speed on optic fiber and wireless networks, the volume of data and the speed of market growth increase. However, the fast growth rate of such large data generates numerous challenges, such as the rapid growth of data, transfer speed, diverse data, and security. Nonetheless, Big Data is still in its infancy stage, and the domain has not been reviewed in general. Hence, this study comprehensively surveys and classifies the various attributes of Big Data, including its nature, definitions, rapid growth rate, volume, management, analysis, and security. This study also proposes a data life cycle that uses the technologies and terminologies of Big Data. Future research directions in this field are determined based on opportunities and several open issues in Big Data domination. These research directions facilitate the exploration of the domain and the development of optimal techniques to address Big Data. PMID:25136682

  14. Applied technology center business plan and market survey

    Science.gov (United States)

    Hodgin, Robert F.; Marchesini, Roberto

    1990-01-01

    Business plan and market survey for the Applied Technology Center (ATC), computer technology transfer and development non-profit corporation, is presented. The mission of the ATC is to stimulate innovation in state-of-the-art and leading edge computer based technology. The ATC encourages the practical utilization of late-breaking computer technologies by firms of all variety.

  15. General survey of Korean advanced technology

    International Nuclear Information System (INIS)

    1984-05-01

    This book includes advanced technology, world trend of advanced technology, technological innovation study for strengthening international competitiveness, patterns of Korea industrialization and its causes, structures of Korea electronic equipment and development direction, middle and long-term prospects of home appliance, the world of computer, current situation and prospect of robot industry, homework for strengthening international competitiveness of machine industry, direction for rationalization of materials industry, current situations of technical textile, future technology of developed countries, and trend of Korea technological activities.

  16. Pilot information needs survey regarding climate relevant technologies

    International Nuclear Information System (INIS)

    Van Berkel, R.; Van Roekel, A.

    1997-02-01

    The objective of this pilot survey was to arrive at a preliminary understanding of the initial technology and technology information needs in non-Annex II countries in order to support international efforts to facilitate the transfer of technologies and know-how conducive to mitigating and adapting to climate change. The study encompassed two main components, i.e. the development of a survey instrument and the execution of a pilot survey among selected non-Annex II countries. The survey instrument addresses the present status of enabling activities; technology and technology information needs; and issues related to information supply and accessibility. The survey was distributed to national focal points in 20 non-Annex II countries and to at least 35 other stakeholders in five of these non-Annex II countries. A total of 27 completed questionnaires were received, covering 10 non-Annex II countries. 3 refs

  17. Pilot information needs survey regarding climate relevant technologies

    Energy Technology Data Exchange (ETDEWEB)

    Van Berkel, R.; Van Roekel, A.

    1997-02-01

    The objective of this pilot survey was to arrive at a preliminary understanding of the initial technology and technology information needs in non-Annex II countries in order to support international efforts to facilitate the transfer of technologies and know-how conducive to mitigating and adapting to climate change. The study encompassed two main components, i.e. the development of a survey instrument and the execution of a pilot survey among selected non-Annex II countries. The survey instrument addresses the present status of enabling activities; technology and technology information needs; and issues related to information supply and accessibility. The survey was distributed to national focal points in 20 non-Annex II countries and to at least 35 other stakeholders in five of these non-Annex II countries. A total of 27 completed questionnaires were received, covering 10 non-Annex II countries. 3 refs.

  18. Development of ITM oxygen technology for integration in IGCC and other advanced power generation

    Energy Technology Data Exchange (ETDEWEB)

    Armstrong, Phillip A. [Air Products And Chemicals, Inc., Allentown, PA (United States)

    2015-03-31

    Ion Transport Membrane (ITM) technology is based on the oxygen-ion-conducting properties of certain mixed-metal oxide ceramic materials that can separate oxygen from an oxygen-containing gas, such as air, under a suitable driving force. The “ITM Oxygen” air separation system that results from the use of such ceramic membranes produces a hot, pure oxygen stream and a hot, pressurized, oxygen-depleted stream from which significant amounts of energy can be extracted. Accordingly, the technology integrates well with other high-temperature processes, including power generation. Air Products and Chemicals, Inc., the Recipient, in conjunction with a dozen subcontractors, developed ITM Oxygen technology under this five-phase Cooperative Agreement from the laboratory bench scale to implementation in a pilot plant capable of producing power and 100 tons per day (TPD) of purified oxygen. A commercial-scale membrane module manufacturing facility (the “CerFab”), sized to support a conceptual 2000 TPD ITM Oxygen Development Facility (ODF), was also established and operated under this Agreement. In the course of this work, the team developed prototype ceramic production processes and a robust planar ceramic membrane architecture based on a novel ceramic compound capable of high oxygen fluxes. The concept and feasibility of the technology was thoroughly established through laboratory pilot-scale operations testing commercial-scale membrane modules run under industrial operating conditions with compelling lifetime and reliability performance that supported further scale-up. Auxiliary systems, including contaminant mitigation, process controls, heat exchange, turbo-machinery, combustion, and membrane pressure vessels were extensively investigated and developed. The Recipient and subcontractors developed efficient process cycles that co-produce oxygen and power based on compact, low-cost ITMs. Process economics assessments show significant benefits relative to state

  19. SLJ's 2011 Technology Survey: Things Are Changing. Fast

    Science.gov (United States)

    Kenney, Brian

    2011-01-01

    Despite the funding challenges nearly all school libraries face, many media specialists are optimistic about the role of technology in the school library, according to "School Library Journal's" ("SLJ") 2011 Technology Survey. But in spite of the general optimism, others point to some significant obstacles: technological innovations are often…

  20. Survey of Enabling Technologies for CAPS

    Science.gov (United States)

    Antol, Jeffrey; Mazanek, Daniel D.; Koons, Robert H.

    2005-01-01

    The enabling technologies required for the development of a viable Comet/Asteroid Protection System (CAPS) can be divided into two principal areas: detection and deflection/orbit modification. With the proper funding levels, many of the technologies needed to support a CAPS architecture could be achievable within the next 15 to 20 years. In fact, many advanced detection technologies are currently in development for future in-space telescope systems such as the James Webb Space Telescope (JWST), formerly known as the Next Generation Space Telescope. It is anticipated that many of the JWST technologies would be available for application for CAPS detection concepts. Deflection/orbit modification technologies are also currently being studied as part of advanced power and propulsion research. However, many of these technologies, such as extremely high-output power systems, advanced propulsion, heat rejection, and directed energy systems, would likely be farther term in availability than many of the detection technologies. Discussed subsequently is a preliminary examination of the main technologies that have been identified as being essential to providing the element functionality defined during the CAPS conceptual study. The detailed requirements for many of the technology areas are still unknown, and many additional technologies will be identified as future in-depth studies are conducted in this area.

  1. A comprehensive survey of brain interface technology designs.

    Science.gov (United States)

    Mason, S G; Bashashati, A; Fatourechi, M; Navarro, K F; Birch, G E

    2007-02-01

    In this work we present the first comprehensive survey of Brain Interface (BI) technology designs published prior to January 2006. Detailed results from this survey, which was based on the Brain Interface Design Framework proposed by Mason and Birch, are presented and discussed to address the following research questions: (1) which BI technologies are directly comparable, (2) what technology designs exist, (3) which application areas (users, activities and environments) have been targeted in these designs, (4) which design approaches have received little or no research and are possible opportunities for new technology, and (5) how well are designs reported. The results of this work demonstrate that meta-analysis of high-level BI design attributes is possible and informative. The survey also produced a valuable, historical cross-reference where BI technology designers can identify what types of technology have been proposed and by whom.

  2. Technology Acceptance Model: A Survey of Literature

    Directory of Open Access Journals (Sweden)

    Priyanka Surendran

    2013-07-01

    Full Text Available The technology acceptance model has been a theory that is most widely used to explain an individual’s acceptance of an information system. This study has reviewed numerous literatures available in this area. The different studies in this area were evaluated to understand the modifications that were done on this model. The paper then tries to provide an insight on future trends in the technology acceptance model.

  3. Survey of network and information security technology

    International Nuclear Information System (INIS)

    Liu Baoxu; Wang Xiaozhen

    2007-01-01

    With the rapidly development of the computer network technology and informationize working of our Country, Network and Information Security issues becomes the focal point problem that people shows solicitude for. On the basis analysing security threat and challenge of network information and their developing trend. This paper briefly analyses and discusses the main relatively study direction and content about the theory, technology and practice of Network and Information Security. (authors)

  4. Online Learning for Mobile Technology Applications in Health Surveys

    International Development Research Centre (IDRC) Digital Library (Canada)

    Online Learning for Mobile Technology Applications in Health Surveys. In light of ... to develop a globally accessible asynchronous Internet-based training packaged backed by a real-time coaching service. Project ID. 105932. Project status.

  5. Survey and analysis of federally developed technology

    Energy Technology Data Exchange (ETDEWEB)

    Reed, J.E.; Conrad, J.L.

    1983-02-01

    The methodology and results of a test effort to determine whether there exist unexpected opportunities for the direct transfer of technologies from federal laboratories to industry are presented. Specifically, the latest results of six federal laboratories with potential application in the pulp and paper industry, particularly those results applicable to improving energy productivity, were evaluated, cataloged, and distributed to industry representatives to gauge their reaction. The principal methodological steps in this effort were the development of a taxonomy of the pulp and paper industry, identification of industry needs and laboratory capabilities, laboratory visits, review of technology findings with industry, and evaluation and compilation of industry responses.

  6. A survey of fault diagnosis technology

    Science.gov (United States)

    Riedesel, Joel

    1989-01-01

    Existing techniques and methodologies for fault diagnosis are surveyed. The techniques run the gamut from theoretical artificial intelligence work to conventional software engineering applications. They are shown to define a spectrum of implementation alternatives where tradeoffs determine their position on the spectrum. Various tradeoffs include execution time limitations and memory requirements of the algorithms as well as their effectiveness in addressing the fault diagnosis problem.

  7. Study and development of a hydrogen/oxygen fuel cell in solid polymer electrolyte technology

    Energy Technology Data Exchange (ETDEWEB)

    Mosdale, R

    1992-10-29

    The hydrogen/oxygen fuel cell appears today as the best candidate to the replacing of the internal combustion engine for automobile traction. This system uses the non explosive electrochemical recombination of hydrogen and oxygen. It is a clean generator whom only reactive product is water. This thesis shows a theoretical study of this system, the synthesis of different kinds of used electrodes and finally an analysis of water movements in polymer electrolyte by different original technologies. 70 refs., 73 figs., 15 tabs.

  8. A Survey of Technologies Supporting Virtual Project Based Learning

    DEFF Research Database (Denmark)

    Dirckinck-Holmfeld, Lone

    2002-01-01

    This paper describes a survey of technologies and to what extent they support virtual project based learning. The paper argues that a survey of learning technologies should be related to concrete learning tasks and processes. Problem oriented project pedagogy (POPP) is discussed, and a framework...... for evaluation is proposed where negotiation of meaning, coordination and resource management are identified as the key concepts in virtual project based learning. Three e-learning systems are selected for the survey, Virtual-U, Lotus Learningspace and Lotus Quickplace, as each system offers different strategies...... for e-learning. The paper concludes that virtual project based learning may benefit from facilities of all these systems....

  9. The survey of nuclear fusion technology

    International Nuclear Information System (INIS)

    Hwang, W.K.

    1981-01-01

    The fusion research evaluation model for analyzing various R and D sinarios, the trend analysis of Tokamak research, and the near-term technologies are discussed. The results of the present study are as follows: A computer code, FUSREV, has been developed based on ECON Inc.'s approach. It consists of the plasma power model and the cost/benefit model. Since the State-of-the Knowledges, which are expected to achieve as the result of subproject R and D's, can only be obtained in the form of probability distribution function, Monte-Carlo method is employed. The test computation of the code shows acceptable results. However, FUSREV has been continuously modified employing new models for both technology and economics

  10. Survey of technological trends in functional membrane materials; Kinosei makuzai ni kansuru gijutsu doko chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1979-03-01

    Materials for membranes with novel functions are surveyed. The survey is focused on 10 subjects, which are high-performance RO (reverse osmosis)/UF (ultrafiltration) membranes; development of an energy-efficient secondary treatment system for urban wastewater using pollution-free membranes; high-performance ion exchange membranes; artificial lung membranes; hydrogen separation membranes (hydrogen as energy); development of an energy-efficient combustion system using gas separation membranes (oxygen-enriched membranes); organic matter separation membranes; enzyme-aided chemical reaction membranes and their application; development of a distilling ship; and functional membranes making use of photosynthesis. Discussed in this connection are the outlines of the technologies, the need of their development, methods and contents of the development efforts, and the effects and impacts of their development. The survey further concerns the particulars of the trends in novel technologies about functional membrane materials development, covering gas separation and liquid separation technologies; chemical reaction membranes; and enzyme-aided chemical reaction membranes and their application systems. As for their application, the survey covers the field of application of desalinated or ultrapure water; field of application of food fermentation technologies; industrial wastewater, valuable materials recovery, and urban wastewater treatment; and application to medical systems. (NEDO)

  11. The Aro 1 mm Survey of the Oxygen-Rich Envelope of Supergiant Star NML Cygnus

    Science.gov (United States)

    Edwards, Jessica L.; Ziurys, L. M.; Woolf, N. J.

    2011-06-01

    Although a number of molecular line surveys of carbon-rich circumstellar envelopes (CSE) have been performed, only one oxygen-rich CSE, that of VY Canis Majoris (VY CMa), has been studied in depth. The Arizona Radio Observatory (ARO) 1 mm survey of VY CMa showed a very different and interesting chemistry dominated by sulfur- and silicon-bearing compounds as well as a number of more exotic species. A similar survey of the oxygen rich star NML Cygnus (NML Cyg) from 215 to 285 GHz is currently under way using the ARO Sub-millimeter Telescope. Initial observations show that this circumstellar envelope appears to be as chemically rich as that of VY CMa. Molecules including 12CO, 13CO, 12CN, 13CN, HCN, HCO+, CS, SO{_2}, SiO and 30SiO have been observed in NML Cyg. Line profiles of this source also suggest that there may be multiple outflows and that the circumstellar envelope is not spherically symmetric. Current results will be presented.

  12. A survey of medical diagnostic imaging technologies

    Energy Technology Data Exchange (ETDEWEB)

    Heese, V.; Gmuer, N.; Thomlinson, W.

    1991-10-01

    The fields of medical imaging and medical imaging instrumentation are increasingly important. The state-of-the-art continues to advance at a very rapid pace. In fact, various medical imaging modalities are under development at the National Synchrotron Light Source (such as MECT and Transvenous Angiography.) It is important to understand how these techniques compare with today's more conventional imaging modalities. The purpose of this report is to provide some basic information about the various medical imaging technologies currently in use and their potential developments as a basis for this comparison. This report is by no means an in-depth study of the physics and instrumentation of the various imaging modalities; instead, it is an attempt to provide an explanation of the physical bases of these techniques and their principal clinical and research capabilities.

  13. A survey of medical diagnostic imaging technologies

    Energy Technology Data Exchange (ETDEWEB)

    Heese, V.; Gmuer, N.; Thomlinson, W.

    1991-10-01

    The fields of medical imaging and medical imaging instrumentation are increasingly important. The state-of-the-art continues to advance at a very rapid pace. In fact, various medical imaging modalities are under development at the National Synchrotron Light Source (such as MECT and Transvenous Angiography.) It is important to understand how these techniques compare with today`s more conventional imaging modalities. The purpose of this report is to provide some basic information about the various medical imaging technologies currently in use and their potential developments as a basis for this comparison. This report is by no means an in-depth study of the physics and instrumentation of the various imaging modalities; instead, it is an attempt to provide an explanation of the physical bases of these techniques and their principal clinical and research capabilities.

  14. A survey of medical diagnostic imaging technologies

    International Nuclear Information System (INIS)

    Heese, V.; Gmuer, N.; Thomlinson, W.

    1991-10-01

    The fields of medical imaging and medical imaging instrumentation are increasingly important. The state-of-the-art continues to advance at a very rapid pace. In fact, various medical imaging modalities are under development at the National Synchrotron Light Source (such as MECT and Transvenous Angiography.) It is important to understand how these techniques compare with today's more conventional imaging modalities. The purpose of this report is to provide some basic information about the various medical imaging technologies currently in use and their potential developments as a basis for this comparison. This report is by no means an in-depth study of the physics and instrumentation of the various imaging modalities; instead, it is an attempt to provide an explanation of the physical bases of these techniques and their principal clinical and research capabilities

  15. Technology Survey Assistance Tool Focusing on Their Advantages

    Science.gov (United States)

    Nishiyama, Risa; Takeuchi, Hironori; Watanabe, Hideo; Nasukawa, Tetsuya

    It is important for R&D managers, consultants, and other people seeking broad knowledge in technology fields to survey technical literature such as research papers, white papers, and technology news articles. One of the important kinds of information for those people regards the effectiveness of new technologies in their own businesses. General search engines are good at selecting documents revealing the details of a specific technology or a technology field, but it is hard to obtain useful information about how a technology will apply to individual business cases from such search results. There is a need for a technology survey assistance tool that helps users find technologies with suitable capabilities. In this paper, two technical tasks were tackled to develop the prototype of this assistance tool: Extraction of advantage phrases and scoring for the advantage phrases to find novel applications in the target technology field. We describe a new method to identify advantage phrases in technical documents and our scoring function that gives higher scores to novel applications of the technology. The results of evaluations showed our phrase identification method with only a few phrasal patterns performs almost as well as human annotators, and the proposed scoring conforms better to the decisions made by professionals than random sort.

  16. The MOSDEF Survey: First Measurement of Nebular Oxygen Abundance at z > 4

    Science.gov (United States)

    Shapley, Alice E.; Sanders, Ryan L.; Reddy, Naveen A.; Kriek, Mariska; Freeman, William R.; Mobasher, Bahram; Siana, Brian; Coil, Alison L.; Leung, Gene C. K.; deGroot, Laura; Shivaei, Irene; Price, Sedona H.; Azadi, Mojegan; Aird, James

    2017-09-01

    We present the first spectroscopic measurement of multiple rest-frame optical emission lines at z > 4. During the MOSFIRE Deep Evolution Field survey, we observed the galaxy GOODSN-17940 with the Keck I/MOSFIRE spectrograph. The K-band spectrum of GOODSN-17940 includes significant detections of the [O II]λλ3726,3729, [Ne III]λ3869, and Hγ emission lines and a tentative detection of Hδ, indicating z spec = 4.4121. GOODSN-17940 is an actively star-forming z > 4 galaxy based on its K-band spectrum and broadband spectral energy distribution. A significant excess relative to the surrounding continuum is present in the Spitzer/IRAC channel 1 photometry of GOODSN-17940, due primarily to strong Hα emission with a rest-frame equivalent width of EW(Hα) = 1200 Å. Based on the assumption of 0.5 Z ⊙ models and the Calzetti attenuation curve, GOODSN-17940 is characterized by {M}* ={5.0}-0.2+4.3× {10}9 {M}⊙ . The Balmer decrement inferred from Hα/Hγ is used to dust correct the Hα emission, yielding {{SFR(H}}α )={320}-140+190 {M}⊙ {{{yr}}}-1. These M * and star formation rate (SFR) values place GOODSN-17940 an order of magnitude in SFR above the z ˜ 4 star-forming “main sequence.” Finally, we use the observed ratio of [Ne III]/[O II] to estimate the nebular oxygen abundance in GOODSN-17940, finding O/H ˜ 0.2 (O/H)⊙. Combining our new [Ne III]/[O II] measurement with those from stacked spectra at z ˜ 0, 2, and 3, we show that GOODSN-17940 represents an extension to z > 4 of the evolution toward higher [Ne III]/[O II] (I.e., lower O/H) at fixed stellar mass. It will be possible to perform the measurements presented here out to z ˜ 10 using the James Webb Space Telescope. Based on data obtained at the W.M. Keck Observatory, which is operated as a scientific partnership among the California Institute of Technology, the University of California, and the National Aeronautics and Space Administration, and was made possible by the generous financial support of

  17. Environmental Survey preliminary report, Pittsburgh Energy Technology Center, Pittsburgh, Pennsylvania

    Energy Technology Data Exchange (ETDEWEB)

    1988-09-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the US Department of Energy (DOE) Pittsburgh Energy Technology Center (PETC) conducted December 7--11, 1987. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team specialists are outside experts being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with PETC. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at PETC, and interviews with site personnel. The Survey team developed a Sampling and Analysis (S A) Plan to assist in further assessing certain environmental problems identified during its on-site Survey activities at PETC. The S A Plan will be executed by the Oak Ridge National Laboratory (ORNL). When completed, the Plan's results will be incorporated into the PETC Survey findings for inclusion into the Environmental Survey Summary Report. 64 refs., 23 figs., 29 tabs.

  18. U.S. Geological Survey laboratory method for methyl tert-Butyl ether and other fuel oxygenates

    Science.gov (United States)

    Raese, Jon W.; Rose, Donna L.; Sandstrom, Mark W.

    1995-01-01

    Methyl tert-butyl ether (MTBE) was found in shallow ground-water samples in a study of 8 urban and 20 agricultural areas throughout the United States in 1993 and 1994 (Squillace and others, 1995, p. 1). The compound is added to gasoline either seasonally or year round in many parts of the United States to increase the octane level and to reduce carbon monoxide and ozone levels in the air. The U.S. Geological Survey (USGS) National Water Quality Laboratory (NWQL), near Denver, uses state-of-the-art technology to analyze samples for MTBE as part of the USGS water-quality studies. In addition, the NWQL offers custom analyses to determine two other fuel oxygenates--ethyl tert-butyl ether (ETBE) and tert-amyl methyl ether (TAME). The NWQL was not able to obtain a reference standard for tert-amyl ethyl ether (TAEE), another possible fuel oxygenate (Shelley and Fouhy, 1994, p. 63). The shallow ground-water samples were collected as part of the USGS National Water-Quality Assessment Program. These samples were collected from 211 urban wells or springs and 562 agricultural wells sampled by the USGS in 1993 and 1994. The wells were keyed to specific land-use areas to assess the effects of different uses on ground-water quality (Squillace and others, 1995, p. 2). Ground-water samples were preserved on site to pH less than or equal to 2 with a solution of 1:1 hydrochloric acid. All samples were analyzed at the NWQL within 2 weeks after collection. The purpose of this fact sheet is to explain briefly the analytical method implemented by the USGS for determining MTBE and other fuel oxygenates. The scope is necessarily limited to an overview of the analytical method (instrumentation, sample preparation, calibration and quantitation, identification, and preservation of samples) and method performance (reagent blanks, accuracy, and precision).

  19. Academic Librarians, Professional Literature, and New Technologies: A Survey

    Science.gov (United States)

    Hardesty, Skye; Sugarman, Tammy

    2007-01-01

    Keeping abreast of professional literature and the latest trends is critical for academic librarians to be successful, but in a time of information glut, are librarians achieving this? Over seven hundred academic librarians responded to this survey and inform us about their use of both traditional methods and new technologies to stay current.

  20. A Survey of New Communications Technologies and Their Uses.

    Science.gov (United States)

    Ploman, Edward W.

    The present survey focuses on certain major developments in various countries which are of immediate relevance to the production, distribution, reception and uses of new communications technologies and media; i.e., satellite communications, cable television, videograms and new forms of video-production. Technical explanations have been avoided,…

  1. Web Surveys to Digital Movies: Technological Tools of the Trade.

    Science.gov (United States)

    Fetterman, David M.

    2002-01-01

    Highlights some of the technological tools used by educational researchers today, focusing on data collection related tools such as Web surveys, digital photography, voice recognition and transcription, file sharing and virtual office, videoconferencing on the Internet, instantaneous chat and chat rooms, reporting and dissemination, and digital…

  2. Social Touch Technology: A Survey of Haptic Technology for Social Touch

    NARCIS (Netherlands)

    Huisman, Gijs

    2017-01-01

    This survey provides an overview of work on haptic technology for social touch. Social touch has been studied extensively in psychology and neuroscience. With the development of new technologies, it is now possible to engage in social touch at a distance or engage in social touch with artificial

  3. Report on technological trend survey in fiscal 2000. Survey on bio-technology development strategy; 2000 nendo gijutsu doko nado chosa hokokusho. Bio technology gijutsu kaihatsu senryaku chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Survey and research have been performed on bio-technologies as to their seeds of technological development projects to be worked on by the government from the viewpoint of industrial utilization technologies. In the survey on the trends of research and development and technological development on human-genomes, the survey has been done on the status of execution in the Millennium Genome Project, and how the works related to human-genomes are done at the bio-related government based research organizations and the private sector research organizations. Trends related to the human-genome research in overseas countries were also surveyed. With regard to the future prospect of research and development in the post genome age, discussions were given on the result of the questionnaire survey on opinion leaders in the industrial, governmental and academic areas. In discussing the viewpoint of the industrial utilization technologies related to human genomes, candidates assumed usable in the genome related application fields were discussed, and a basic framework of a technological map was prepared. Based on the results thereof, the technological development areas anticipated to be important in the future were extracted, and the technological development themes were discussed. (NEDO)

  4. Technology assessments in transportation: survey of recent literature

    Energy Technology Data Exchange (ETDEWEB)

    LaBelle, S.J.

    1980-03-01

    A survey and an evaluation of recent studies of transportation systems done in a technology-assessment framework were undertaken as the basis for a detailed statement of work for a US Department of Energy technology assessment of transportation energy-conservation strategies. Several bibliographies were searched and numerous professionals in the field of technology assessment were contacted regarding current work. Detailed abstracts were prepared for studies judged to be sufficiently broad in coverage of impacts assessed, yet detailed in coverage of all or part of the nation's transportation systems. Some studies were rich in data but not comprehensive in their analytical approach; brief abstracts were prepared for these. An explanation of the criteria used to screen the studies, as well as abstracts of 37 reports, are provided in this compendium of transportation-technology-assessment literature.

  5. Technology, design and dementia: an exploratory survey of developers.

    Science.gov (United States)

    Jiancaro, Tizneem; Jaglal, Susan B; Mihailidis, Alex

    2017-08-01

    Despite worldwide surges in dementia, we still know relatively little about the design of home technologies that support this population. The purpose of this study was to investigate design considerations from the perspective of developers. Participants, including technical and clinical specialists, were recruited internationally and answered web-based survey questions comprising Likert-type responses with text entry options. Developers were queried on 23 technology acceptance characteristics and 24 design practices. In all, forty developers completed the survey. Concerning "technology acceptance", cost, learnability, self-confidence (during use) and usability were deemed very important. Concerning "design practice", developers overwhelmingly valued user-centred design (UCD). In terms of general assistive technology (AT) models, these were largely unknown by technical specialists compared to clinical specialists. Recommendations based on this study include incorporating "self-confidence" into design protocols; examining the implications of "usability" and UCD in this context; and considering empathy-based design approaches to suit a diverse user population. Moreover, clinical specialists have much to offer development teams, particularly concerning the use of conceptual AT models. Implications of rehabilitation Stipulate precise usability criteria. Consider "learnability" and "self-confidence" as technology adoption criteria. Recognize the important theoretical role that clinical specialists can fulfil concerning the use of design schemas. Acknowledge the diversity amongst users with dementia, potentially adopting techniques, such as designing for "extraordinary users".

  6. Pipe Explorer{trademark} surveying system. Innovative technology summary report

    Energy Technology Data Exchange (ETDEWEB)

    1999-06-01

    The US Department of Energy`s (DOE) Chicago Operations Office and the DOE`s Federal Energy Technology Center (FETC) developed a Large Scale Demonstration Project (LSDP) at the Chicago Pile-5 Research Reactor (CP-5) at Argonne National Laboratory-East (ANL). The objective of the LSDP is to demonstrate potentially beneficial decontamination and decommissioning (D and D) technologies in comparison with current baseline technologies. The Pipe Explorer{trademark} system was developed by Science and Engineering Associates, Inc. (SEA), Albuquerque, NM as a deployment method for transporting a variety of survey tools into pipes and ducts. Tools available for use with the system include alpha, beta and gamma radiation detectors; video cameras; and pipe locator beacons. Different versions of this technology have been demonstrated at three other sites; results of these demonstrations are provided in an earlier Innovative Technology Summary Report. As part of a D and D project, characterization radiological contamination inside piping systems is necessary before pipes can be recycled, remediated or disposed. This is usually done manually by surveying over the outside of the piping only, with limited effectiveness and risk of worker exposure. The pipe must be accessible to workers, and embedded pipes in concrete or in the ground would have to be excavated at high cost and risk of exposure to workers. The advantage of the Pipe Explorer is its ability to perform in-situ characterization of pipe internals.

  7. Pipe Explorer surveying system. Innovative technology summary report

    International Nuclear Information System (INIS)

    1999-06-01

    The US Department of Energy's (DOE) Chicago Operations Office and the DOE's Federal Energy Technology Center (FETC) developed a Large Scale Demonstration Project (LSDP) at the Chicago Pile-5 Research Reactor (CP-5) at Argonne National Laboratory-East (ANL). The objective of the LSDP is to demonstrate potentially beneficial decontamination and decommissioning (D and D) technologies in comparison with current baseline technologies. The Pipe Explorer trademark system was developed by Science and Engineering Associates, Inc. (SEA), Albuquerque, NM as a deployment method for transporting a variety of survey tools into pipes and ducts. Tools available for use with the system include alpha, beta and gamma radiation detectors; video cameras; and pipe locator beacons. Different versions of this technology have been demonstrated at three other sites; results of these demonstrations are provided in an earlier Innovative Technology Summary Report. As part of a D and D project, characterization radiological contamination inside piping systems is necessary before pipes can be recycled, remediated or disposed. This is usually done manually by surveying over the outside of the piping only, with limited effectiveness and risk of worker exposure. The pipe must be accessible to workers, and embedded pipes in concrete or in the ground would have to be excavated at high cost and risk of exposure to workers. The advantage of the Pipe Explorer is its ability to perform in-situ characterization of pipe internals

  8. Students' Perceptions of and Experiences With Educational Technology: A Survey.

    Science.gov (United States)

    Royal, Kenneth; Hedgpeth, Mari-Wells; McWhorter, Dan

    2016-05-18

    It is generally assumed that incoming students in medical education programs will be better equipped for the "digital age" given their younger age and an educational upbringing in which technology was seemingly omnipresent. In particular, many assume that today's medical students are more likely to hold positive attitudes and increased comfortability with technology and possess greater information technology (IT) skills. The purpose of this study was to compare responses of incoming veterinary medical students to a series of IT-related questions contained in a common questionnaire over the course of a 10-year period (2005-2015) to discern whether students' attitudes have improved and uses and comfortability with technology have increased as anticipated. A survey measuring attitudes and preferences, computing experience, and technology ownership was administered each year for the past 10 years to incoming veterinary medical students at a large veterinary school in the United States. Students' responses to survey items were compared at 3 data points (2005, 2010, and 2015). Today's incoming veterinary medical students tend to indicate the same desire to improve skills using spreadsheets and web page design as incoming students from 10 years ago. It seems that despite technological advances and increased exposure to such applications and skills, there remains a challenge for students to "keep up" with the ever evolving technology. Moreover, although students continue to report they are very comfortable with using a computer (and related devices), many use their computers as typewriters or word processors, as opposed to a means for performing more advanced computing functions. In general, today's medical students are not expert computer users as many assume. Despite an upbringing in a digitized world, many students still lack many basic computing skills.

  9. Technological learning in energy-environment-economy modelling: A survey

    International Nuclear Information System (INIS)

    Kahouli-Brahmi, Sondes

    2008-01-01

    This paper aims at providing an overview and a critical analysis of the technological learning concept and its incorporation in energy-environment-economy models. A special emphasis is put on surveying and discussing, through the so-called learning curve, both studies estimating learning rates in the energy field and studies incorporating endogenous technological learning in bottom-up and top-down models. The survey of learning rate estimations gives special attention to interpreting and explaining the sources of variability of estimated rates, which is shown to be mainly inherent in R and D expenditures, the problem of omitted variable bias, the endogeneity relationship and the role of spillovers. Large-scale models survey show that, despite some methodological and computational complexity related to the non-linearity and the non-convexity associated with the learning curve incorporation, results of the numerous modelling experiments give several new insights with regard to the analysis of the prospects of specific technological options and their cost decrease potential (bottom-up models), and with regard to the analysis of strategic considerations, especially inherent in the innovation and energy diffusion process, in particular the energy sector's endogenous responses to environment policy instruments (top-down models)

  10. Automated entry technologies for confined space work activities: A survey.

    Science.gov (United States)

    Botti, Lucia; Ferrari, Emilio; Mora, Cristina

    2017-04-01

    Work in confined spaces poses a significant risk to workers and rescuers involved in the emergency response when an accident occurs. Despite several standards and regulations define the safety requirements for such activities, injuries, and fatalities still occur. Furthermore, the on-site inspections after accidents often reveal that both employers and employees fail to implement safe entry procedures. Removing the risk is possible by avoiding the worker entry, but many activities require the presence of the operator inside the confined space to perform manual tasks. The following study investigates the available technologies for hazardous confined space work activities, e.g., cleaning, inspecting, and maintenance tasks. The aim is to provide a systematic review of the automated solutions for high-risk activities in confined spaces, considering the non-man entry as the most effective confined space safety strategy. Second, this survey aims to provide suggestions for future research addressing the design of new technologies. The survey consists of about 60 papers concerning innovative technologies for confined space work activities. The document review shows that several solutions have been developed and automation can replace the workers for a limited number of hazardous tasks. Several activities still require the manual intervention due to the complex characteristics of confined spaces, e.g., to remove the remains of the automatic cleaning process from the bottom of a tank. The results show that available technologies require more flexibility to adapt to such occupational environments and further research is needed.

  11. Hyperbaric Oxygen Therapy for the Treatment of Diabetic Foot Ulcers: A Health Technology Assessment

    Science.gov (United States)

    Lambrinos, Anna; Chan, Brian; Wells, David; Holubowich, Corinne

    2017-01-01

    Background About 15% to 25% of people with diabetes will develop a foot ulcer. These wounds are often resistant to healing; therefore, people with diabetes experience lower limb amputation at about 20 times the rate of people without diabetes. If an ulcer does not heal with standard wound care, other therapeutic interventions are offered, one of which is hyperbaric oxygen therapy (HBOT). However, the effectiveness of this therapy is not clearly known. The objectives of this health technology assessment were to assess the safety, clinical effectiveness, and cost-effectiveness of standard wound care plus HBOT versus standard wound care alone for the treatment of diabetic foot ulcers. We also investigated the preferences and perspectives of people with diabetic foot ulcers through lived experience. Methods We performed a review of the clinical and economic literature for the effectiveness and cost-effectiveness of hyperbaric oxygen therapy, as well as the budget impact of HBOT from the perspective of the Ministry of Health and Long-Term Care. We assessed the quality of the body of clinical evidence using the Grading of Recommendations Assessment, Development, and Evaluation (GRADE) Working Group criteria. To better understand the preferences, perspectives, and values of patients with diabetic foot ulcers and their experience with HBOT, we conducted interviews and administered an online survey. Results Seven randomized controlled trials and one nonrandomized controlled trial met the inclusion criteria. Comparing standard wound care plus HBOT with standard wound care alone, we found mixed results for major amputation rates (GRADE quality of evidence: low), a significant difference in favour of standard wound care plus HBOT on ulcers healed (GRADE quality of evidence: low), and no difference in terms of adverse events (GRADE quality of evidence: moderate). There is a large degree of uncertainty associated with the evaluation of the cost-effectiveness of standard wound

  12. Survey of Canadian Myotonic Dystrophy Patients' Access to Computer Technology.

    Science.gov (United States)

    Climans, Seth A; Piechowicz, Christine; Koopman, Wilma J; Venance, Shannon L

    2017-09-01

    Myotonic dystrophy type 1 is an autosomal dominant condition affecting distal hand strength, energy, and cognition. Increasingly, patients and families are seeking information online. An online neuromuscular patient portal under development can help patients access resources and interact with each other regardless of location. It is unknown how individuals living with myotonic dystrophy interact with technology and whether barriers to access exist. We aimed to characterize technology use among participants with myotonic dystrophy and to determine whether there is interest in a patient portal. Surveys were mailed to 156 participants with myotonic dystrophy type 1 registered with the Canadian Neuromuscular Disease Registry. Seventy-five participants (60% female) responded; almost half were younger than 46 years. Most (84%) used the internet; almost half of the responders (47%) used social media. The complexity and cost of technology were commonly cited reasons not to use technology. The majority of responders (76%) were interested in a myotonic dystrophy patient portal. Patients in a Canada-wide registry of myotonic dystrophy have access to and use technology such as computers and mobile phones. These patients expressed interest in a portal that would provide them with an opportunity to network with others with myotonic dystrophy and to access information about the disease.

  13. How Consumers and Physicians View New Medical Technology: Comparative Survey.

    Science.gov (United States)

    Boeldt, Debra L; Wineinger, Nathan E; Waalen, Jill; Gollamudi, Shreya; Grossberg, Adam; Steinhubl, Steven R; McCollister-Slipp, Anna; Rogers, Marc A; Silvers, Carey; Topol, Eric J

    2015-09-14

    As a result of the digital revolution coming to medicine, a number of new tools are becoming available and are starting to be introduced in clinical practice. We aim to assess health care professional and consumer attitudes toward new medical technology including smartphones, genetic testing, privacy, and patient-accessible electronic health records. We performed a survey with 1406 health care providers and 1102 consumer responders. Consumers who completed the survey were more likely to prefer new technologies for a medical diagnosis (437/1102, 39.66%) compared with providers (194/1406, 13.80%; P<.001), with more providers (393/1406, 27.95%) than consumers (175/1102, 15.88%) reporting feeling uneasy about using technology for a diagnosis. Both providers and consumers supported genetic testing for various purposes, with providers (1234/1406, 87.77%) being significantly more likely than consumers (806/1102, 73.14%) to support genetic testing when planning to have a baby (P<.001). Similarly, 91.68% (1289/1406) of providers and 81.22% (895/1102) of consumers supported diagnosing problems in a fetus (P<.001). Among providers, 90.33% (1270/1406) were concerned that patients would experience anxiety after accessing health records, and 81.95% (1149/1406) felt it would lead to requests for unnecessary medical evaluations, but only 34.30% (378/1102; P<.001) and 24.59% (271/1102; P<.001) of consumers expressed the same concerns, respectively. Physicians (137/827, 16.6%) reported less concern about the use of technology for diagnosis compared to medical students (21/235, 8.9%; P=.03) and also more frequently felt that patients owned their medical record (323/827, 39.1%; and 30/235, 12.8%, respectively; P<.001). Consumers and health professionals differ significantly and broadly in their views of emerging medical technology, with more enthusiasm and support expressed by consumers.

  14. A survey of stakeholder perspectives on exoskeleton technology.

    Science.gov (United States)

    Wolff, Jamie; Parker, Claire; Borisoff, Jaimie; Mortenson, W Ben; Mattie, Johanne

    2014-12-19

    Exoskeleton technology has potential benefits for wheelchair users' health and mobility. However, there are practical barriers to their everyday use as a mobility device. To further understand potential exoskeleton use, and facilitate the development of new technologies, a study was undertaken to explore perspectives of wheelchair users and healthcare professionals on reasons for use of exoskeleton technology, and the importance of a variety of device characteristics. An online survey with quantitative and qualitative components was conducted with wheelchair users and healthcare professionals working directly with individuals with mobility impairments. Respondents rated whether they would use or recommend an exoskeleton for four potential reasons. Seventeen design features were rated and compared in terms of their importance. An exploratory factor analysis was conducted to categorize the 17 design features into meaningful groupings. Content analysis was used to identify themes for the open ended questions regarding reasons for use of an exoskeleton. 481 survey responses were analyzed, 354 from wheelchair users and 127 from healthcare professionals. The most highly rated reason for potential use or recommendation of an exoskeleton was health benefits. Of the design features, 4 had a median rating of very important: minimization of falls risk, comfort, putting on/taking off the device, and purchase cost. Factor analysis identified two main categories of design features: Functional Activities and Technology Characteristics. Qualitative findings indicated that health and physical benefits, use for activity and access reasons, and psychosocial benefits were important considerations in whether to use or recommend an exoskeleton. This study emphasizes the importance of developing future exoskeletons that are comfortable, affordable, minimize fall risk, and enable functional activities. Findings from this study can be utilized to inform the priorities for future

  15. 75 FR 52508 - Proposed Information Collection; Comment Request; Information and Communication Technology Survey

    Science.gov (United States)

    2010-08-26

    ... conduct the 2010 through 2012 Information and Communication Technology Survey (ICTS). The annual survey... payments) for four types of information and communication technology equipment and software (computers and... and Communication Technology Survey AGENCY: U.S. Census Bureau. ACTION: Notice. SUMMARY: The...

  16. 78 FR 50374 - Proposed Information Collection; Comment Request; Information and Communication Technology Survey

    Science.gov (United States)

    2013-08-19

    ... and Communication Technology Survey AGENCY: U.S. Census Bureau, Commerce. ACTION: Notice. SUMMARY: The... Communication Technology Survey (ICTS). The annual survey collects data on two categories of non-capitalized... communication technology equipment and software (computers and peripheral equipment; ICT equipment, excluding...

  17. Technology assessment of multileaf collimation: a North American users survey

    International Nuclear Information System (INIS)

    Klein, Eric E.; Tepper, Joel; Sontag, Mark; Franklin, Michael; Ling, Clifton; Kubo, Dale

    1999-01-01

    Purpose: The American Association of Physicists in Medicine (AAPM) initiated an Assessment of Technology Subcommittee (ATS) to help the radiotherapy community evaluate emerging technologies. The ATS decided to first address multileaf collimation (MLC) by means of a North American users survey. The survey attempted to address issues such as MLC utility, efficacy, cost-effectiveness, and customer satisfaction. Methods and Materials: The survey was designed with 38 questions, with cross-tabulation set up to decipher a particular clinic's perception of MLC. The surveys were coded according to MLC types, which were narrowed to four: Elekta, Siemens, Varian 52-leaf, and Varian 80-leaf. A 40% return rate was desired. Results: A 44% (108 of 250) return was achieved. On an MLC machine, 76.5% of photon patients are being treated with MLC. The main reasons for not using MLC were stair stepping, field size limitation, and physician objection. The most common sites in which MLC is being used are lung, pelvis, and prostate. The least used sites are head and neck and mantle fields. Of the facilities, 31% claimed an increase in number of patients being treated since MLC was installed, and 44% claimed an increase in the number of fields. Though the staffing for block cutting has decreased, therapist staffing has not. However, 91% of the facilities claimed a decreased workload for the therapists, despite the increase in daily treated patients and fields. Of the facilities that justified MLC purchase for more daily patients, 63% are actually treating more patients. Only 26% of the facilities that justified an MLC purchase for intensity-modulated radiotherapy (IMRT) are currently using it for that purpose. The satisfaction rating (1 = low to 5 = high) for department groups averaged 4.0. Therapists ranked MLC as 4.6. Conclusions: Our survey shows that most users have successfully introduced MLC into the clinic as a block replacement. Most have found MLC to be cost-effective and

  18. Technology Addiction Survey: An Emerging Concern for Raising Awareness and Promotion of Healthy Use of Technology.

    Science.gov (United States)

    Sharma, Manoj Kumar; Rao, Girish N; Benegal, Vivek; Thennarasu, K; Thomas, Divya

    2017-01-01

    Technology use has shown an impact of users' lifestyle. The use has been attributed to psychosocial reasons. This usage manifests as excessive to addictive use of technology. There is a need to explore its addictive potential on large sample study as well as its association with psychosocial variables. It is one of its kind study on wider age group. The present work assessed the magnitude, burden, and sociodemographic correlates of technology addiction in an urban community. A total of 2755 individuals (1392 males and 1363 females) in the age group of 18-65 years were approached for screening internet addiction and mobile overuse, using house-to-house survey methodology. The survey indicated the presence of addiction for 1.3% for internet (2% males and 0.6% females) and mobile phone overuse (4.1%-2.5% males and 1.5% females). It was more common among males. Significant differences were observed in relation to family status for internet and mobile phone use more commonly among single/nuclear families. Technology addictions were found to be more common among single families and lesser in nuclear and joint families. Mobile phone users had psychiatric distress in comparison to users with internet addiction. The study showed negative correlation of age, years of marriage, and numbers of family members with internet addiction and mobile overuse. It has implication for raising awareness about addictive potential of technology and its impact on one's lifestyle.

  19. Survey on In-vehicle Technology Use: Results and Findings

    Directory of Open Access Journals (Sweden)

    Raj K. Kamalanathsharma

    2015-06-01

    Full Text Available The use of advanced technology in automobiles has increased dramatically in the past couple of years. Driver-assisting gadgets such as navigation systems, advanced cruise control, collision avoidance systems, and other safety systems have moved down the ladder from luxury to more basic vehicles. Concurrently, auto manufacturers are also designing and testing driving algorithms that can assist with basic driving tasks, many of which are being continuously scrutinized by traffic safety agencies to ensure that these systems do not pose a safety hazard. The research presented in this paper brings a third perspective to in-vehicle technology by conducting a two-stage survey to collect public opinion on advanced in-vehicle technology. Approximately 64 percent of the respondents used a smartphone application to assist with their travel. The top-used applications were navigation and real-time traffic information systems. Among those who used smartphones during their commutes, the top-used applications were navigation and entertainment.

  20. Survey of LWR environmental control technology performance and cost

    International Nuclear Information System (INIS)

    Heeb, C.M.; Aaberg, R.L.; Cole, B.M.; Engel, R.L.; Kennedy, W.E. Jr.; Lewallen, M.A.

    1980-03-01

    This study attempts to establish a ranking for species that are routinely released to the environment for a projected nuclear power growth scenario. Unlike comparisons made to existing standards, which are subject to frequent revision, the ranking of releases can be used to form a more logical basis for identifying the areas where further development of control technology could be required. This report describes projections of releases for several fuel cycle scenarios, identifies areas where alternative control technologies may be implemented, and discusses the available alternative control technologies. The release factors were used in a computer code system called ENFORM, which calculates the annual release of any species from any part of the LWR nuclear fuel cycle given a projection of installed nuclear generation capacity. This survey of fuel cycle releases was performed for three reprocessing scenarios (stowaway, reprocessing without recycle of Pu and reprocessing with full recycle of U and Pu) for a 100-year period beginning in 1977. The radioactivity releases were ranked on the basis of a relative ranking factor. The relative ranking factor is based on the 100-year summation of the 50-year population dose commitment from an annual release of radioactive effluents. The nonradioactive releases were ranked on the basis of dilution factor. The twenty highest ranking radioactive releases were identified and each of these was analyzed in terms of the basis for calculating the release and a description of the currently employed control method. Alternative control technology is then discussed, along with the available capital and operating cost figures for alternative control methods

  1. A SEARCH FOR OXYGEN IN THE LOW-DENSITY Lyα FOREST USING THE SLOAN DIGITAL SKY SURVEY

    International Nuclear Information System (INIS)

    Pieri, Matthew M.; Frank, Stephan; Mathur, Smita; Weinberg, David H.; York, Donald G.; Oppenheimer, Benjamin D.

    2010-01-01

    We use 2167 Sloan Digital Sky Survey quasar spectra to search for low-density oxygen in the intergalactic medium (IGM). Oxygen absorption is detected on a pixel-by-pixel basis by its correlation with Lyα forest absorption. We have developed a novel locally calibrated pixel (LCP) search method that uses adjacent regions of the spectrum to calibrate interlopers and spectral artifacts, which would otherwise limit the measurement of O VI absorption. Despite the challenges presented by searching for weak O VI within the Lyα forest in spectra of moderate resolution and signal-to-noise, we find a highly significant detection of absorption by oxygen at 2.7 2 = 80 for nine data points). We interpret our results using synthetic spectra generated from a log-normal density field assuming a mixed quasar-galaxy photoionizing background and that it dominates the ionization fraction of detected O VI. The LCP search data can be fit by a constant metallicity model with [O/H] = -2.15 +0.07 -0.09 but also by models in which low-density regions are unenriched and higher density regions have a higher metallicity. The density-dependent enrichment model by Aguirre et al. is also an acceptable fit. All our successful models have similar mass-weighted oxygen abundance, corresponding to [(O/H) MW ] = -2.45 ± 0.06. This result can be used to find the cosmic oxygen density in the Lyα forest, Ω Oxy,IGM = 1.4(±0.2) x 10 -6 ∼ 3 x 10 -4 Ω b . This is the tightest constraint on the mass-weighted mean oxygen abundance and the cosmic oxygen density in the Lyα forest to date and indicates that it contains ∼16% of the total expected metal production by star formation up to z = 3.

  2. [A survey of medical information education in radiological technology schools].

    Science.gov (United States)

    Ohba, Hisateru; Ogasawara, Katsuhiko; Hoshino, Shuhei; Hosoba, Minoru; Okuda, Yasuo; Konishi, Yasuhiko; Ikeda, Ryuji

    2010-08-20

    The purpose of this study was to clarify actual conditions and problems in medical information education and to propose the educational concept to be adopted in medical information. A questionnaire survey was carried out by the anonymous method in June 2008. The survey was intended for 40 radiological technology schools. The questionnaire items were as follows: (1) educational environment in medical information education, (2) content of a lecture in medical information, (3) problems in medical information education. The response rate was 55.0% (22 schools). Half of the responding schools had a laboratory on medical information. Seventeen schools had a medical information education facility, and out of them, approximately 50% had an educational medical information system. The main problems of the medical information education were as follows: (a) motivation of the students is low, (b) the educational coverage and level for medical information are uncertain, (c) there are not an appropriate textbook and educational guidance. In conclusion, these findings suggest that it is necessary to have a vision of medical information education in the education of radiological technologists.

  3. Information technology for sustainable supply chain management: a literature survey

    Science.gov (United States)

    Thöni, Andreas; Tjoa, A. Min

    2017-07-01

    In supply chain management (SCM), two topics have gained importance over the last years. On the one hand, sustainable SCM (SSCM) has become increasingly relevant and many publications have contributed to the topic. On the other hand, information technology (IT) is being progressively considered as a key enabler for efficiency in supply chains. Several research efforts have contributed to the field of IT for SSCM. However, this paper is the first recent attempt to summarise the current state of the art of how IT can affect SSCM in any structured way and to compare it with IT for 'general' SCM to give guidance for future research. This paper surveys 55 peer-reviewed articles that were retrieved through keyword searches (until May 2014). The analysis identifies research deficits as well as a lack of scientific discourse employing empirical techniques and a lack of investigations on the social sustainability. Additionally, possible topics for further research were derived by comparing the survey's results with the current research on IT for 'general' SCM following the analysis of 631 articles. Six fields could be identified, namely output/effects of IT, machine communication and multiagents, inputs and IT-supported processing, IT-enabled interorganisational exchange, quantitative IT approaches and a sector focus.

  4. A survey of medical information education in radiological technology schools

    International Nuclear Information System (INIS)

    Ohba, Hisateru; Ogasawara, Katsuhiko; Hoshino, Shuhei; Hosoba, Minoru; Okuda, Yasuo; Konishi, Yasuhiko; Ikeda, Ryuji

    2010-01-01

    The purpose of this study was to clarify actual conditions and problems in medical information education and to propose the educational concept to be adopted in medical information. A questionnaire survey was carried out by the anonymous method in June 2008. The survey was intended for 40 radiological technology schools. The questionnaire items were as follows: educational environment in medical information education, content of a lecture in medical information, problems in medical information education. The response rate was 55.0% (22 schools). Half of the responding schools had a laboratory on medical information. Seventeen schools had a medical information education facility, and out of them, approximately 50% had an educational medical information system. The main problems of the medical information education were as follows: motivation of the students is low, the educational coverage and level for medical information are uncertain, there are not an appropriate textbook and educational guidance. In conclusion, these findings suggest that it is necessary to have a vision of medical information education in the education of radiological technologists. (author)

  5. A Discussion of Oxygen Recovery Definitions and Key Performance Parameters for Closed-Loop Atmosphere Revitalization Life Support Technology Development

    Science.gov (United States)

    Abney, Morgan B.; Perry, Jay L.

    2016-01-01

    Over the last 55 years, NASA has evolved life support for crewed space exploration vehicles from simple resupply during Project Mercury to the complex and highly integrated system of systems aboard the International Space Station. As NASA targets exploration destinations farther from low Earth orbit and mission durations of 500 to 1000 days, life support systems must evolve to meet new requirements. In addition to having more robust, reliable, and maintainable hardware, limiting resupply becomes critical for managing mission logistics and cost. Supplying a crew with the basics of food, water, and oxygen become more challenging as the destination ventures further from Earth. Aboard ISS the Atmosphere Revitalization Subsystem (ARS) supplies the crew's oxygen demand by electrolyzing water. This approach makes water a primary logistics commodity that must be managed carefully. Chemical reduction of metabolic carbon dioxide (CO2) provides a method of recycling oxygen thereby reducing the net ARS water demand and therefore minimizing logistics needs. Multiple methods have been proposed to achieve this recovery and have been reported in the literature. However, depending on the architecture and the technology approach, "oxygen recovery" can be defined in various ways. This discontinuity makes it difficult to compare technologies directly. In an effort to clarify community discussions of Oxygen Recovery, we propose specific definitions and describe the methodology used to arrive at those definitions. Additionally, we discuss key performance parameters for Oxygen Recovery technology development including challenges with comparisons to state-of-the-art.

  6. Leading survey and research report for fiscal 1999. Survey and research on supercompiler technology; 1999 nendo supercompiler technology no chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Survey and research are conducted into the global computing technology and the next-generation parallel computer for their compiler technology and programming environment-related technology, which is for the preparation of basic key technologies for the embodiment of high-performance computing for the next generation, and efforts are exerted to extract and define technological problems and to deliberate a research system to achieve the goal. This fiscal year's achievements are mentioned below. Two territories were provided to be respectively covered by a Parallel Compiler Working Group and a Global Computing Working Group whose activities centered about overseas surveys and short-term reception of researchers from abroad. The Parallel Compiler Working Group was engaged in (1) the technological survey of the latest parallel compiler technology and, in its effort to execute researches under the project, in (2) the materialization of the contents of technology research and development and in (3) the materialization of a technology research and development system. The Global Computing Working Group was engaged in (1) the technological survey of the latest high-performance global computing and in (2) the survey of fields to accept global computing application. (NEDO)

  7. Leading survey and research report for fiscal 1999. Survey and research on supercompiler technology; 1999 nendo supercompiler technology no chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Survey and research are conducted into the global computing technology and the next-generation parallel computer for their compiler technology and programming environment-related technology, which is for the preparation of basic key technologies for the embodiment of high-performance computing for the next generation, and efforts are exerted to extract and define technological problems and to deliberate a research system to achieve the goal. This fiscal year's achievements are mentioned below. Two territories were provided to be respectively covered by a Parallel Compiler Working Group and a Global Computing Working Group whose activities centered about overseas surveys and short-term reception of researchers from abroad. The Parallel Compiler Working Group was engaged in (1) the technological survey of the latest parallel compiler technology and, in its effort to execute researches under the project, in (2) the materialization of the contents of technology research and development and in (3) the materialization of a technology research and development system. The Global Computing Working Group was engaged in (1) the technological survey of the latest high-performance global computing and in (2) the survey of fields to accept global computing application. (NEDO)

  8. Bottom Dissolved Oxygen Maps From SEAMAP Summer Groundfish/Shrimp Surveys

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Bottom dissolved oxygen (DO) data was extracted from environmental profiles acquired during the Southeast Fisheries Science Center Mississippi Laboratories summer...

  9. Introductory study of super survey (next generation underground exploration technology); Super survey (jisedai chika tansa gijutsu) no sendo kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    An investigational study was conducted on the R and D trend of innovative technology aiming at high-accuracy/high-efficiency next generation underground exploration technology (super survey technology). Paying attention to the seismic survey and electromagnetic survey, the study was made on technical characteristics, the utilization status and the needs at sites, the R and D trend, etc. As to the present R and D, the development is proceeded with of the time domain method in the electromagnetic survey, the effective quantity data processing/analysis method and the indication method using the reflection method in the elastic survey. As new technology to be noticed, the following are cited: SQUID magnetometer, underground analysis using magnetic deviation data, electromagnetic migration, ACROSS, rotating seismometer, laser Doppler vibrator, etc. Concerning the course of the next generation underground survey technology, a system of the integrated underground exploration theory is considered which is based on a combination of the electromagnetic survey and seismic exploration. In the study, a plan is worked out for research/development of a technology of analyzing the different data obtained. 49 figs., 13 tabs.

  10. Integration of intracellular telomerase monitoring by electrochemiluminescence technology and targeted cancer therapy by reactive oxygen species.

    Science.gov (United States)

    Zhang, Huairong; Li, Binxiao; Sun, Zhaomei; Zhou, Hong; Zhang, Shusheng

    2017-12-01

    Cancer therapies based on reactive oxygen species (ROS) have emerged as promising clinical treatments. Electrochemiluminescence (ECL) technology has also attracted considerable attention in the field of clinical diagnosis. However, studies about the integration of ECL diagnosis and ROS cancer therapy are very rare. Here we introduce a novel strategy that employs ECL technology and ROS to fill the above vacancy. Briefly, an ITO electrode was electrodeposited with polyluminol-Pt NPs composite films and modified with aptamer DNA to capture HL-60 cancer cells with high specificity. After that, mesoporous silica nanoparticles (MSNs) filled with phorbol 12-myristate 13-acetate (PMA) were closed by the telomerase primer DNA (T-primer DNA) and aptamer. After aptamer on MSN@PMA recognized and combined with the HL-60 cancer cells with high specificity, T-primer DNA on MSN@PMA could be moved away from the MSN@PMA surface after extension by telomerase in the HL-60 cancer cells and PMA was released to induce the production of ROS by the HL-60 cancer cells. After that, the polyluminol-Pt NPs composite films could react with hydrogen peroxide (a major ROS) and generate an ECL signal. Thus the intracellular telomerase activity of the HL-60 cancer cells could be detected in situ . Besides, ROS could induce apoptosis in the HL-60 cancer cells with high efficacy by causing oxidative damage to the lipids, protein, and DNA. Above all, the designed platform could not only detect intracellular telomerase activity instead of that of extracted telomerase, but could also kill targeted tumors by ECL technology and ROS.

  11. Development of ITM Oxygen Technology for Low-cost and Low-emission Gasification and Other Industrial Applications

    Energy Technology Data Exchange (ETDEWEB)

    Fogash, Kevin [Air Products and Chemicals, Inc., Allentown, PA (United States)

    2015-12-15

    Air Products carried out a scope of work under DOE Award No. DE-FE0012065 “Development of ITM Oxygen Technology for Low-cost and Low-emission Gasification and Other Industrial Applications” with subcontractors Ceramatec, Penn State, and WorleyParsons. The scope of work under this award was aimed at furthering the development of the Ion Transport Membrane (ITM) Oxygen production process toward a demonstration-scale facility known as the Oxygen Development Facility (ODF). Specific activities will help to enable design and construction of the ODF through advancement of a number of challenging technical elements that are required to manage risk in the initial deployment of ITM technology. Major objectives of the work included developing ITM Oxygen ceramic membrane materials with improved performance and reliability, optimizing ceramic module geometry and fabrication methods, testing module performance, trialing the improved fabrication process at commercial scale in the Ceramic Membrane Module Fabrication Facility (CerFab), and advancing engineering development of the ITM oxygen production process, including vessel design and contaminant control measures to prepare for deployment of the ODF. The comprehensive report that follows details the team’s work, which includes several notable accomplishments: 1) compressive creep, a likely limiter of ceramic module lifetime in service, was demonstrated to be retarded by an order of magnitude by changes in material formulation, module joining dimensions, and internal wafer geometry; 2) two promising new materials were shown to be superior to the incumbent ITM material in a key material parameter related to oxygen flux; 3) module degradation mechanisms were identified following operation in large pilot-scale equipment; 4) options for utilizing ITM in a coal-to-liquids (CTL) facility to enable liquids production with carbon capture were identified and studied; and 5) the benefits of potential improvements to the technology

  12. Development of ITM Oxygen Technology for Low-cost and Low-emission Gasification and Other Industrial Applications

    Energy Technology Data Exchange (ETDEWEB)

    Fogash, Kevin [Air Products and Chemicals, Inc., Allentown, PA (United States)

    2017-05-17

    Air Products carried out a scope of work under DOE Award No. DE-FE0012065 “Development of ITM Oxygen Technology for Low-cost and Low-emission Gasification and Other Industrial Applications” with subcontractors Ceramatec, Penn State, and WorleyParsons. The scope of work under this award was aimed at furthering the development of the Ion Transport Membrane (ITM) Oxygen production process toward a demonstration-scale facility known as the Oxygen Development Facility (ODF). Specific activities will help to enable design and construction of the ODF through advancement of a number of challenging technical elements that are required to manage risk in the initial deployment of ITM technology. Major objectives of the work included developing ITM Oxygen ceramic membrane materials with improved performance and reliability, optimizing ceramic module geometry and fabrication methods, testing module performance, trialing the improved fabrication process at commercial scale in the Ceramic Membrane Module Fabrication Facility (CerFab), and advancing engineering development of the ITM oxygen production process, including vessel design and contaminant control measures to prepare for deployment of the ODF. The comprehensive report that follows details the team’s work, which includes several notable accomplishments: 1) compressive creep, a likely limiter of ceramic module lifetime in service, was demonstrated to be retarded by an order of magnitude by changes in material formulation, module joining dimensions, and internal wafer geometry; 2) two promising new materials were shown to be superior to the incumbent ITM material in a key material parameter related to oxygen flux; 3) module degradation mechanisms were identified following operation in large pilot-scale equipment; 4) options for utilizing ITM in a coal-to-liquids (CTL) facility to enable liquids production with carbon capture were identified and studied; and 5) the benefits of potential improvements to the technology

  13. Reactions of oxygen and hydrogen with liquid sodium - a critical survey

    International Nuclear Information System (INIS)

    Ullmann, H.

    1982-01-01

    The fundamentals of solvation chemistry are presented with appropriate components formulated. Methods of investigation and kinetics of the reactions are described. The hydrogen equilibrium pressure and saturation solubilities are described. The chemical equilibrium between O and H in solution is presented with detailed tabulation of the saturation solutions of oxygen, hydrogen and hydroxide in liquid sodium. Agreements and differences with the literature are presented

  14. A survey of the reaction rate constants for the thermal dissociation and recombination of nitrogen and oxygen

    Science.gov (United States)

    Marraffa, Lionel; Dulikravich, George S.; Keeney, Timothy C.; Deiwert, George S.

    1988-01-01

    The objective of the present report is to survey the various values of forward and backward reaction rate constants used by investigators in the field of high-temperature (T greater than 2000 K) gas reactions involving nitrogen and oxygen only. The objective is to find those values that correlate well so that they can be used for the studies of hypersonic flow and supersonic combustion with reasonable confidence. Relatively good agreement among these various values is observed for temperatures lower than 10,000 K.

  15. Reconstructing the Pupils Attitude towards Technology-Survey

    Science.gov (United States)

    Ardies, Jan; De Maeyer, Sven; Gijbels, David

    2013-01-01

    In knowledge based economies technological literacy is gaining interest. Technological literacy correlates with attitude towards technology. When measuring technological literacy as an outcome of education, the attitudinal dimension has to be taken into account. This requires a valid, reliable instrument that should be as concise as possible, in…

  16. Fiscal 2000 survey report on the survey and research on green technology industry; 2000 nendo green technology industry ni kansuru chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    The approaches of the Government and local autonomies to green technologies are surveyed toward the construction of a green technology industry. The present activities and future outlook of environmental industries interested in green technologies are surveyed and examined, the green technologies here including (1) energy conservation measures and development of non-fossil fuels, (2) energy-related and environmental measures for countering global warming, (3) waste treatment measures for countering dioxins and endocrine disrupters. A survey is conducted of the outlines and future trends of green technology related important studies now under way at laboratories and research institutes of universities, the Government, and private-sector corporations. Based on the results of the surveys, important subjects of technical development in green technologies are extracted and studied for the possibility and outlook of their practical application. Tasks to discharge and problems to occur before they are introduced to the market are also evaluated and confirmed. Based on the results of the research and development of green technologies, actualities of environmental industries are taken up, and the problems and tasks to be settled before environmental technologies are introduced to the market are investigated and studied. (NEDO)

  17. The oxygen reactivity index and its relation to sensor technology in patients with severe brain lesions.

    Science.gov (United States)

    Dengler, Julius; Frenzel, Christin; Vajkoczy, Peter; Horn, Peter; Wolf, Stefan

    2013-08-01

    The oxygen reactivity index (ORx) has been introduced to assess the status of cerebral autoregulation after traumatic brain injury (TBI) or subarachnoid hemorrhage (SAH). Currently, there is some controversy about whether the ORx depends on the type of PbrO2-sensor technology used for its calculation. To examine if the probe technology does matter, we compared the ORx and the resulting optimal cerebral perfusion pressures (CPPopt) of simultaneously implanted Licox (CC1.SB, Integra Neuroscience, France) and Neurovent-PTO (Raumedic, Germany) probes in patients after aneurysmal SAH or severe TBI. Licox and Raumedic probes were implanted side by side in 11 patients after TBI or SAH. ORx and CPPopt were recorded continuously. The equivalence of both probes was examined using Bland-Altman analyses. The mean difference in ORx was 0.1, with Licox producing higher values. The limits of agreement regarding ORx ranged from -0.6 to +0.7. When both probes' ORx values were compared in each patient, no specific pattern in their relationship was seen. The mean difference in CPPopt was 0 mmHg with limits of agreement between -16.5 and +16.4 mmHg. Owing to the rather limited number of patients, we view the results of this study as preliminary. The main result is that Licox and Raumedic showed consistent differences in ORx and CPPopt. Therefore, ORx values of both probes cannot be interchanged and should not be viewed as equivalent. This should be taken into consideration when discussing ORx data generated by different PbrO2 probe types.

  18. Classroom Technology in Business Schools: A Survey of Installations and Attitudes toward Teaching and Learning

    Science.gov (United States)

    Parker, Betty; Burnie, David

    2009-01-01

    A survey of administrators and faculty of AACSB-accredited business schools provided insights into current classroom technology infrastructure, attitudes towards technology and learning, and the use of web course tools in business school classrooms. The results of the survey provided four major findings: business schools are utilizing high levels…

  19. Calcium and chemical looping technology for power generation and carbon dioxide (CO2) capture solid oxygen- and CO2-carriers

    CERN Document Server

    Fennell, Paul

    2015-01-01

    Calcium and Chemical Looping Technology for Power Generation and Carbon Dioxide (CO2) Capture reviews the fundamental principles, systems, oxygen carriers, and carbon dioxide carriers relevant to chemical looping and combustion. Chapters review the market development, economics, and deployment of these systems, also providing detailed information on the variety of materials and processes that will help to shape the future of CO2 capture ready power plants. Reviews the fundamental principles, systems, oxygen carriers, and carbon dioxide carriers relevant to calcium and chemical loopingProvi

  20. Enhancing Field Research Methods with Mobile Survey Technology

    Science.gov (United States)

    Glass, Michael R.

    2015-01-01

    This paper assesses the experience of undergraduate students using mobile devices and a commercial application, iSurvey, to conduct a neighborhood survey. Mobile devices offer benefits for enhancing student learning and engagement. This field exercise created the opportunity for classroom discussions on the practicalities of urban research, the…

  1. COMPENDIUM: SURVEYS EVALUATING KNOWLEDGE AND OPINIONS CONCERNING HYDROGEN AND FUEL CELL TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Truett, Lorena Faith [ORNL; Cooper, Christy [U.S. Department of Energy; Schmoyer, Richard L [ORNL

    2008-10-01

    This compendium updates a 2003 literature review of surveys of knowledge and opinions of hydrogen and fuel cell technologies. Its purpose is to ensure that results of comparable surveys are considered in surveys conducted by the U.S. Department of Energy (DOE). Over twice as many studies related to the DOE survey have been published since 2003 than prior to that date. The fact that there have been significantly more studies implies that there have been further demonstration projects and/or increased interest in hydrogen and fuel cell technologies. The primary findings of these 15 new surveys, all of which were conducted in Europe (E) or North America (NA), to the DOE surveys are as follows: 1.Respondents who are more educated are more accepting of hydrogen technologies (NA). 2.Respondents who are more knowledgeable about hydrogen and/or fuel cells are more accepting of hydrogen technologies (E, NA). 3.When asked about issues of trust, respondents generally expressed distrust of the government or political parties but trusted scientists and environmental protection organizations (E). 4.Technical knowledge about hydrogen and fuel cell technologies is low (E, NA). 5.Respondents may express opinions about a technology even when they are lacking in knowledge of that technology (E). 6.Women and men have different priorities when deciding on an automobile purchase (E). 7.Public acceptance to hydrogen is vulnerable to perceptions of decreased safety (E, NA). 8.Public acceptance to hydrogen is vulnerable to perceptions of increased cost (E, NA). The DOE surveys are similar to surveys that examine technical knowledge of hydrogen and fuel cell technologies, although the technical questions are certainly different. The DOE surveys are also similar to the opinion surveys in that they address many of the same issues, such as safety, sources of energy information, or trust. There are many differences between the surveys reviewed in this compendium and the DOE surveys. The

  2. Evaluation of different near-infrared spectroscopy technologies for assessment of tissue oxygen saturation during a vascular occlusion test.

    Science.gov (United States)

    Steenhaut, Kevin; Lapage, Koen; Bové, Thierry; De Hert, Stefan; Moerman, Annelies

    2017-12-01

    An increasing number of NIRS devices are used to provide measurements of peripheral tissue oxygen saturation (S t O 2 ). The aim of the present study is to test the hypothesis that despite technological differences between devices, similar trend values will be obtained during a vascular occlusion test. The devices compared are NIRO-200NX, which measures S t O 2 and oxyhemoglobin by spatially resolved spectroscopy and the Beer-Lambert law, respectively, and INVOS 5100C and Foresight Elite, which both measure S t O 2 with the Beer-Lambert law, enhanced with the spatial resolution technique. Forty consenting adults scheduled for CABG surgery were recruited. The respective sensors of the three NIRS devices were applied over the brachioradial muscle. Before induction of anesthesia, 3 min of ischemia were induced by inflating a blood pressure cuff at the upper arm, whereafter cuff pressure was rapidly released. Tissue oxygenation measurements included baseline, minimum and maximum values, desaturation and resaturation slopes, and rise time. Comparisons between devices were performed with the Kruskal-Wallis test with post hoc Mann-Whitney pairwise comparisons. Agreement was evaluated using Bland-Altman plots. Oxyhemoglobin measured with NIRO responded faster than the other NIRS technologies to changes in peripheral tissue oxygenation (20 vs. 27-40 s, p ≤ 0.01). When comparing INVOS with Foresight, oxygenation changes were prompter (upslope 311 [92-523]%/min vs. 114[65-199]%/min, p ≤ 0.01) and more pronounced (minimum value 36 [21-48] vs. 45 [40-51]%, p ≤ 0.01) with INVOS. Significant differences in tissue oxygen saturation measurements were observed, both within the same device as between different devices using the same measurement technology.

  3. A survey on the wireless sensor network technology

    International Nuclear Information System (INIS)

    Kim, Jae Hee; Jun, Hyeong Seop; Lee, Jae Cheol; Choi, Yoo Rak

    2007-12-01

    Wireless sensor technology is required in the safety inspection for safety-critical unit of nuclear power plant. This report describes wireless sensor technology related with the project named 'Development of a remote care system of NPP components based on the network and safety database'. This report includes contents of methodology and status of sensor network construction, status of zigbee sensor network, problem of security and sensor battery. Energy harvesting technology will be mentioned on the next report

  4. Survey of Promising Technologies for 5G Networks

    OpenAIRE

    Le, Nam Tuan; Hossain, Mohammad Arif; Islam, Amirul; Kim, Do-yun; Choi, Young-June; Jang, Yeong Min

    2016-01-01

    As an enhancement of cellular networks, the future-generation 5G network can be considered an ultra-high-speed technology. The proposed 5G network might include all types of advanced dominant technologies to provide remarkable services. Consequently, new architectures and service management schemes for different applications of the emerging technologies need to be recommended to solve issues related to data traffic capacity, high data rate, and reliability for ensuring QoS. Cloud computing, I...

  5. Chemical ionisation mass spectrometry: a survey of instrument technology

    International Nuclear Information System (INIS)

    Mather, R.E.; Todd, J.F.J.

    1979-01-01

    The purpose of this review is to survey the innovations and improvements which have been made in both instrumentation and methodology in chemical ionization mass spectrometry in the past ten years. (Auth.)

  6. Design of generic coal conversion facilities: Production of oxygenates from synthesis gas---A technology review

    Energy Technology Data Exchange (ETDEWEB)

    1991-10-01

    This report concentrates on the production of oxygenates from coal via gasification and indirect liquefaction. At the present the majority of oxygenate synthesis programs are at laboratory scale. Exceptions include commercial and demonstration scale plants for methanol and higher alcohols production, and ethers such as MTBE. Research and development work has concentrated on elucidating the fundamental transport and kinetic limitations governing various reactor configurations. But of equal or greater importance has been investigations into the optimal catalyst composition and process conditions for the production of various oxygenates.

  7. A Survey on Evaluation Factors for Business Process Management Technology

    NARCIS (Netherlands)

    Mutschler, B.B.; Reichert, M.U.

    2006-01-01

    Estimating the value of business process management (BPM) technology is a difficult task to accomplish. Computerized business processes have a strong impact on an organization, and BPM projects have a long-term cost amortization. To systematically analyze BPM technology from an economic-driven

  8. National Survey of Computer Aided Manufacturing in Industrial Technology Programs.

    Science.gov (United States)

    Heidari, Farzin

    The current status of computer-aided manufacturing in the 4-year industrial technology programs in the United States was studied. All industrial technology department chairs were mailed a questionnaire divided into program information, equipment information, and general comments sections. The questionnaire was designed to determine the subjects…

  9. Survey of Promising Technologies for 5G Networks

    Directory of Open Access Journals (Sweden)

    Nam Tuan Le

    2016-01-01

    Full Text Available As an enhancement of cellular networks, the future-generation 5G network can be considered an ultra-high-speed technology. The proposed 5G network might include all types of advanced dominant technologies to provide remarkable services. Consequently, new architectures and service management schemes for different applications of the emerging technologies need to be recommended to solve issues related to data traffic capacity, high data rate, and reliability for ensuring QoS. Cloud computing, Internet of things (IoT, and software-defined networking (SDN have become some of the core technologies for the 5G network. Cloud-based services provide flexible and efficient solutions for information and communications technology by reducing the cost of investing in and managing information technology infrastructure. In terms of functionality, SDN is a promising architecture that decouples control planes and data planes to support programmability, adaptability, and flexibility in ever-changing network architectures. However, IoT combines cloud computing and SDN to achieve greater productivity for evolving technologies in 5G by facilitating interaction between the physical and human world. The major objective of this study provides a lawless vision on comprehensive works related to enabling technologies for the next generation of mobile systems and networks, mainly focusing on 5G mobile communications.

  10. Failed technology futures: Pitfalls and lessons from a historical survey

    NARCIS (Netherlands)

    Geels, F.W.; Smit, Willem A.

    2000-01-01

    Images of the future, with hindsight, turn out to be either right or wrong. In this article, past images of the impact of Information and Communication Technology (ICT) on traffic and transportation are investigated. Informed by the field of technology studies, seven key features are formulated that

  11. Use of assistive technologies in academic libraries: a survey.

    Science.gov (United States)

    Tripathi, Manorama; Shukla, Archana

    2014-01-01

    The present article attempts to highlight the use of assistive technologies in academic libraries in India, the United Kingdom, the United States, and Canada. It dwells upon the use and importance of assistive technologies in general and their use for visually challenged learners in particular. Further, it gives suggestions for implementing assistive technologies in academic libraries for making visually challenged students self-reliant learners in accomplishing their academic and research pursuits. The present study adopted convenience sampling for collecting the data, which was collected between December 15, 2012 and January 18, 2013.

  12. FY 2000 report on the project for promotion of clean coal technology. Survey of zero emission coal technology; 2000 nendo clean coru technology suishin jigyo. Zero emission coru technology chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    The paper surveyed a plan on the zero emission coal technology including up to CO2 fixation which is proposed in the U.S. and the present situation of the related study, and studied the viability of this plan including the R and D similar to this plan in Japan. Los Alamos National Laboratory in the U.S. thought of a concept of the technology to produce hydrogen from coal and recover CO2 at the same time for underground fixation, and is proceeding with the practical application. The process does not need oxygen, combustion, nor heating to be newly made. What is needed except coal is only water and lime, both of which can be recycled. The process, which discharges nothing into the air, is a closed cycle. The HyPr-RING process in Japan is a technology to decompose coal in high temperature (about 650 degrees C)/high pressure (100-200 atm) water for hydrogen formation, absorbing the formed CO2 by CaO, etc. Both of the processes have the problem, but it is necessary to make information exchanges since Japan and the U.S. devised the process at the same time. (NEDO)

  13. International survey on attitudes toward ethics in health technology assessment: An exploratory study

    NARCIS (Netherlands)

    Arellano, L.E.; Willett, J.M.; Borry, P.

    2011-01-01

    Objectives: The objective of this exploratory study was to survey international health technology assessment (HTA) professionals to determine attitudes toward ethics in HTA. Methods: An exploratory, quantitative, cross-sectional study design was developed. The sample population (n = 636) was

  14. A survey of environmental needs and innovative technologies in Germany

    International Nuclear Information System (INIS)

    Voss, C.F.; Roberds, W.J.

    1995-05-01

    The International Technology Program (IT?), formerly the international Technology Exchange Program (ITEP), of the Department of Energy's (DOE's) Office of Environmental Restoration and Waste Management (EM) is responsible for promoting: (1) the import of innovative technologies to better address EM's needs; and (2) the export of US services into foreign markets to enhance US competitiveness. Under this program: (1) the environmental restoration market in Germany was evaluated, including the description of the general types of environmental problems, the environmental regulations, and specific selected contaminated sites; and (2) potentially innovative environmental restoration technologies, either commercially available or under development in Germany, were identified, described and evaluated. It was found that: (1) the environmental restoration market in Germany is very large, on the order of several billion US dollars per year, with a significant portion possibly available to US businesses; and (2) a large number (54) of innovative environmental restoration technologies, which are either commercially available or under development in Germany, may have some benefit to the DOE EM program and should be considered for transfer to the US

  15. Survey of subsurface geophysical exploration technologies adaptable to an airborne platform

    International Nuclear Information System (INIS)

    Taylor, K.A.

    1992-12-01

    This report has been prepared by the US Department of Energy (DOE) as part of a Research Development Demonstration Testing and Evaluation (RDDT ampersand E) project by EG ampersand G Energy Measurement's (EG ampersand G/EM) Remote Sensing Laboratory. It examines geophysical detection techniques which may be used in Environmental Restoration/Waste Management (ER/WM) surveys to locate buried waste, waste containers, potential waste migratory paths, and aquifer depths. Because of the Remote Sensing Laboratory's unique survey capabilities, only those technologies which have been adapted or are capable of being adapted to an airborne platform were studied. This survey describes several of the available subsurface survey technologies and discusses the basic capabilities of each: the target detectability, required geologic conditions, and associated survey methods. Because the airborne capabilities of these survey techniques have not been fully developed, the chapters deal mostly with the ground-based capabilities of each of the technologies, with reference made to the airborne capabilities where applicable. The information about each survey technique came from various contractors whose companies employ these specific technologies. EG ampersand G/EM cannot guarantee or verify the accuracy of the contractor information; however, the data given is an indication of the technologies that are available

  16. A Survey of Former Drafting & Engineering Design Technology Students. Summary Findings of Respondents District-Wide.

    Science.gov (United States)

    Glyer-Culver, Betty

    In fall 2001 staff of the Los Rios Community College District Office of Institutional Research collaborated with occupational deans, academic deans, and faculty to develop and administer a survey of former Drafting and Engineering Design Technology students. The survey was designed to determine how well courses had met the needs of former drafting…

  17. Application of new technologies in surveying. Einsatz von neuen Technologien im Vermessungswesen

    Energy Technology Data Exchange (ETDEWEB)

    Sperling, D [Rheinisch-Westfaelisches Elektrizitaetswerk AG, Essen (Germany, F.R.). Hauptverwaltung

    1990-07-01

    The 'tools' of the surveyor have changed considerably in the last few years. New technologies dominate the work scene, but also require many times higher capital expenditure, associated with increased economic risk. Site definition is undertaken from three fields of engineering surveying: Electronic 3D measuring technique, photogrammetric measuring procedure and surveying by satellite. (orig.).

  18. A Synthesis and Survey of Critical Success Factors for Computer Technology Projects

    Science.gov (United States)

    Baker, Ross A.

    2012-01-01

    The author investigated the existence of critical success factors for computer technology projects. Current research literature and a survey of experienced project managers indicate that there are 23 critical success factors (CSFs) that correlate with project success. The survey gathered an assessment of project success and the degree to which…

  19. Financing New Technologies, Equipment/Furniture Replacement, and Building Renovation: A Survey Report.

    Science.gov (United States)

    Shirk, Gary M.

    1984-01-01

    Reports results of survey of methods used by 77 North American academic and public libraries to finance implementation of new technologies, replace equipment and furniture, and renovate buildings. Financing methods used, frequency of use, choice, and range of methods are discussed. Eight references and list of survey participants are appended.…

  20. Report on the surveys in fiscal 1984. Surveys on the possibility of using coal liquefied oil as a raw material, and technological development thereon; 1984 nendo sekitan ekikayu no genryoka no kanosei oyobi sono gijutsu kaihatsu ni kansuru chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1985-03-01

    With an objective to establish an optimal method for utilizing coal liquefied oil, surveys were performed on the current status of applicable separation technologies for effective utilization of the hetero compounds of O and N contained in liquefied oil, the possibility of hetero compound utilization and issues in technological development for the utilization thereof. Since coal liquefied oil reflects greatly the coal composition and its structure, it contains generally a greater amount of hetero compounds, such as nitrogen and sulfur, as well as aromatic compounds than petroleum. If the hetero compounds could be removed from the liquefied oil more effectively before reforming as a result of progress in separation technologies, hydrogen consumption may be reduced. In addition, economic performance of the coal liquefaction business can be relatively improved by establishing a technology to utilize more effectively these by-products. The current fiscal year has performed surveys on the current status of technologies to separate oxygen and nitrogen in liquefied oil, the possibility of utilizing these hetero compounds, and issues in technological development for the utilization thereof. At the same time, surveys were carried out on the compositions, contents, and separation and analysis methods of hetero compounds in oil obtained by using the coal liquefaction systems being practically used. (NEDO)

  1. Roof Moisture Surveys: Current State Of The Technology

    Science.gov (United States)

    Tobiasson, Wayne

    1983-03-01

    Moisture is the big enemy of compact roofing systems. Non-destructive nuclear, capacitance and infrared methods can all find wet insulation in such roofs but a few core samples are needed for verification. Nuclear and capacitance surveys generate quantitative results at grid points but examine only a small portion of the roof. Quantitative results are not usually provided by infrared scanners but they can rapidly examine every square inch of the roof. Being able to find wet areas when they are small is an important advantage. Prices vary with the scope of the investigation. For a particular scope, the three techniques are often cost-competitive. The limitations of each technique are related to the people involved as well as the equipment. When the right people are involved, non-destructive surveys are a very effective method for improving the long-term performance and reducing the life-cycle costs of roofing systems. Plans for the maintenance, repair or replacement of a roof should include a roof moisture survey.

  2. Nondestructive detection of total viable count changes of chilled pork in high oxygen storage condition based on hyperspectral technology

    Science.gov (United States)

    Zheng, Xiaochun; Peng, Yankun; Li, Yongyu; Chao, Kuanglin; Qin, Jianwei

    2017-05-01

    The plate count method is commonly used to detect the total viable count (TVC) of bacteria in pork, which is timeconsuming and destructive. It has also been used to study the changes of the TVC in pork under different storage conditions. In recent years, many scholars have explored the non-destructive methods on detecting TVC by using visible near infrared (VIS/NIR) technology and hyperspectral technology. The TVC in chilled pork was monitored under high oxygen condition in this study by using hyperspectral technology in order to evaluate the changes of total bacterial count during storage, and then evaluate advantages and disadvantages of the storage condition. The VIS/NIR hyperspectral images of samples stored in high oxygen condition was acquired by a hyperspectral system in range of 400 1100nm. The actual reference value of total bacteria was measured by standard plate count method, and the results were obtained in 48 hours. The reflection spectra of the samples are extracted and used for the establishment of prediction model for TVC. The spectral preprocessing methods of standard normal variate transformation (SNV), multiple scatter correction (MSC) and derivation was conducted to the original reflectance spectra of samples. Partial least squares regression (PLSR) of TVC was performed and optimized to be the prediction model. The results show that the near infrared hyperspectral technology based on 400-1100nm combined with PLSR model can describe the growth pattern of the total bacteria count of the chilled pork under the condition of high oxygen very vividly and rapidly. The results obtained in this study demonstrate that the nondestructive method of TVC based on NIR hyperspectral has great potential in monitoring of edible safety in processing and storage of meat.

  3. Evaluating Recommender Systems for Technology Enhanced Learning: A Quantitative Survey

    Science.gov (United States)

    Erdt, Mojisola; Fernandez, Alejandro; Rensing, Christoph

    2015-01-01

    The increasing number of publications on recommender systems for Technology Enhanced Learning (TEL) evidence a growing interest in their development and deployment. In order to support learning, recommender systems for TEL need to consider specific requirements, which differ from the requirements for recommender systems in other domains like…

  4. A Survey on Economic-driven Evaluations of Information Technology

    NARCIS (Netherlands)

    Mutschler, B.B.; Zarvic, N.; Reichert, M.U.

    2007-01-01

    The economic-driven evaluation of information technology (IT) has become an important instrument in the management of IT projects. Numerous approaches have been developed to quantify the costs of an IT investment and its assumed profit, to evaluate its impact on business process performance, and to

  5. A survey of passive technology for digital image forensics

    Institute of Scientific and Technical Information of China (English)

    LUO Weiqi; QU Zhenhua; PAN Feng; HUANG Jiwu

    2007-01-01

    Over the past years,digital images have been widely used in the Internet and other applications.Whilst image processing techniques are developing at a rapid speed,tampering with digital images without leaving any obvious traces becomes easier and easier.This may give rise to some problems such as image authentication.A new passive technology for image forensics has evolved quickly during the last few years.Unlike the signature-based or watermark-based methods,the new technology does not need any signature generated or watermark embedded in advance,it assumes that different imaging devices or processing would introduce different inherent patterns into the output images.These underlying patterns are consistent in the original untampered images and would be altered after some kind of manipulations.Thus,they can be used as evidence for image source identification and alteration detection.In this paper,we will discuss this new forensics technology and give an overview of the prior literatures.Some concluding remarks are made about the state of the art and the challenges in this novel technology.

  6. An Empirical Survey of Technology Application in Teaching ...

    African Journals Online (AJOL)

    The present study is very important and necessary because many teachers are ... and the extent of utilization of ICTs in instruction in Nigerian secondary schools. ... new technology in teaching and learning Geography in Nigerian Secondary ... While 42% rarely make use of multi- media presentation in teaching Geography.

  7. The development of machine technology processing for earth resource survey

    Science.gov (United States)

    Landgrebe, D. A.

    1970-01-01

    The following technologies are considered for automatic processing of earth resources data: (1) registration of multispectral and multitemporal images, (2) digital image display systems, (3) data system parameter effects on satellite remote sensing systems, and (4) data compression techniques based on spectral redundancy. The importance of proper spectral band and compression algorithm selections is pointed out.

  8. Methane Post-Processor Development to Increase Oxygen Recovery beyond State-of-the-Art Carbon Dioxide Reduction Technology

    Science.gov (United States)

    Abney, Morgan B.; Greenwood, Zachary; Miller, Lee A.; Alvarez, Giraldo; Iannantuono, Michelle; Jones, Kenny

    2013-01-01

    State-of-the-art life support carbon dioxide (CO2) reduction technology, based on the Sabatier reaction, is theoretically capable of 50% recovery of oxygen from metabolic CO2. This recovery is constrained by the limited availability of reactant hydrogen. Post-processing of the methane byproduct from the Sabatier reactor results in hydrogen recycle and a subsequent increase in oxygen recovery. For this purpose, a Methane Post-Processor Assembly containing three sub-systems has been developed and tested. The assembly includes a Methane Purification Assembly (MePA) to remove residual CO2 and water vapor from the Sabatier product stream, a Plasma Pyrolysis Assembly (PPA) to partially pyrolyze methane into hydrogen and acetylene, and an Acetylene Separation Assembly (ASepA) to purify the hydrogen product for recycle. The results of partially integrated testing of the sub-systems are reported

  9. National Board Certified School Librarians' Leadership in Technology Integration: Results of a National Survey

    Science.gov (United States)

    Everhart, Nancy; Mardis, Marcia A.; Johnston, Melissa

    2011-01-01

    In an effort to address the lack of empirical knowledge about the school librarians' role in technology, the Institute for Museum and Library Services funded Project Leadership-in-Action (LIA) to study leadership practices of school librarians. This current grant project includes a survey of the technology integration practices of school…

  10. Development of metal catalyst impregnation technology for membrane-based oxygen removal system

    International Nuclear Information System (INIS)

    Kim, Mun Soo; Lee, Doo Ho; Kang, Duk Won

    2005-01-01

    Dissolved oxygen(DO) is a primary cause of PWSCC and its content in reactor coolant system in NPPs has been strictly controlled by various DO removal methods. There are several removal methods of DO, such as vacuum degasification, thermal deaeration, and reductive removal by oxygen scavengers. Although the operation principles of vacuum degasification and thermal deaeration are simple, these methods require a lot of energy for operation and show lower efficiency. And these methods have a few handicaps such as temperature, pH, toxicity, high cost of installation and so on. For the purpose of developing the best method for DO removal from make-up water storage tank, it is necessary to overcome the disadvantages of hydrazine treatment. From this point of view, membrane-based oxygen removal system (MORS) has many advantages than other methods for example, friendly environmental process, versatility of operation conditions with high temperature and low pressure, small space, low cost, etc. Recently de-gassing membrane is widely used in power plant's feed water system for DO removal. De-gassing membrane has some advantages; it removes other dissolved gases such as CO2, N2, as well as O2, and is more economical than Catalytic resin-based Oxygen Removal System. In this study, to obtain better efficiency of MORS, we modified the polypropylene (PP) hollow fiber membrane by plasma treatment and ion beam irradiation supported platinum(Pt), palladium(Pd) as metal catalyst on the surface of the membrane

  11. Research of oxygen free copper of Upcast {sup registered} technology for electric and electronic uses

    Energy Technology Data Exchange (ETDEWEB)

    Knych, Tadeusz; Smyrak, Beata; Walkowicz, Monika [AGH-Univ. of Science and Technology, Cracow (Poland)

    2011-01-15

    Rapid development of electronics and electrical engineering imposes a necessity to search for new materials enabling fast and lossless transmission of electrical signals. Increasingly common application of electronic systems and elements of electrical engineering contributed to the development of a new group of products representing highly advanced properties. Modern solutions concerning the materials to be used for manufacturing of the above specified products concentrate mainly on high purity copper. As a standard Oxygen Free Copper (OFC) or high purity Oxygen Free High Conductivity Copper (OFHC) are used for production of this kind of wires. OFHC copper purity class of 4N (99.99 %) contains approximately 1 to 3 ppm of oxygen and the total amount of impurities on the level not exceeding 22 ppm. This type of copper is additionally characterized by excellent deformation capabilities as well as corrosion and hydrogen embrittlement resistance. This article presents the analysis of the results of the complex research program on identification of the properties pertaining to wire rods produced oxygen free copper from Upcast line and ETP wire rod produced on Contirod {sup registered} line - in both cases the same type of cathode was used. Additionally, a subsequent analysis of the annealing susceptibility of wires obtained from Cu-OF rod (Upcast {sup registered}) and Cu-ETP wire rod (Contirod {sup registered}) was carried out. The comparative research on the recrystallization temperature proved to be the most interesting point. (orig.)

  12. Survey of computer vision technology for UVA navigation

    Science.gov (United States)

    Xie, Bo; Fan, Xiang; Li, Sijian

    2017-11-01

    Navigation based on computer version technology, which has the characteristics of strong independence, high precision and is not susceptible to electrical interference, has attracted more and more attention in the filed of UAV navigation research. Early navigation project based on computer version technology mainly applied to autonomous ground robot. In recent years, the visual navigation system is widely applied to unmanned machine, deep space detector and underwater robot. That further stimulate the research of integrated navigation algorithm based on computer version technology. In China, with many types of UAV development and two lunar exploration, the three phase of the project started, there has been significant progress in the study of visual navigation. The paper expounds the development of navigation based on computer version technology in the filed of UAV navigation research and draw a conclusion that visual navigation is mainly applied to three aspects as follows.(1) Acquisition of UAV navigation parameters. The parameters, including UAV attitude, position and velocity information could be got according to the relationship between the images from sensors and carrier's attitude, the relationship between instant matching images and the reference images and the relationship between carrier's velocity and characteristics of sequential images.(2) Autonomous obstacle avoidance. There are many ways to achieve obstacle avoidance in UAV navigation. The methods based on computer version technology ,including feature matching, template matching, image frames and so on, are mainly introduced. (3) The target tracking, positioning. Using the obtained images, UAV position is calculated by using optical flow method, MeanShift algorithm, CamShift algorithm, Kalman filtering and particle filter algotithm. The paper expounds three kinds of mainstream visual system. (1) High speed visual system. It uses parallel structure, with which image detection and processing are

  13. Advanced technology trend survey of micromachines in Europe; Oshu ni okeru micromachine sentan gijutsu doko chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-02-01

    In this research survey, the development trend of micromachine technology in Europe was surveyed, development level of micromachine technology of European companies was grasped, and practical application fields of their target were investigated. Technology development level of private companies in Japan`s national projects and practical application fields of Japan`s target were arranged. Trends of micromachine technology development are compared between Japanese companies and European companies. Among micromachine technology development projects in Europe, ``8520 MUST`` is a part of the ESPRIT Project. About 40,000 companies among about 170,000 companies in whole Europe are relating to the MUST Project. The main fields include the manufacturing technology, process control of machines, technology of safety, sensor technology in environmental fields, and automotive technology. The marketing fields of application include the automobile, military technology, home automation, industrial process, medical technology, environmental technology, and games. The results can be compared with the direction of research and development in Japan. 22 figs., 8 tabs.

  14. Errors in practical measurement in surveying, engineering, and technology

    International Nuclear Information System (INIS)

    Barry, B.A.; Morris, M.D.

    1991-01-01

    This book discusses statistical measurement, error theory, and statistical error analysis. The topics of the book include an introduction to measurement, measurement errors, the reliability of measurements, probability theory of errors, measures of reliability, reliability of repeated measurements, propagation of errors in computing, errors and weights, practical application of the theory of errors in measurement, two-dimensional errors and includes a bibliography. Appendices are included which address significant figures in measurement, basic concepts of probability and the normal probability curve, writing a sample specification for a procedure, classification, standards of accuracy, and general specifications of geodetic control surveys, the geoid, the frequency distribution curve and the computer and calculator solution of problems

  15. An International Survey of Shock and Vibration Technology

    Science.gov (United States)

    1979-03-01

    evolve from concept to reality. The basic food to nourish our progress will come from the inventiveness of our fundamental researchers. The progress...Space Agency, Paris, Franch , Rept. No. ESA-TT-244; DLR-Mitt-74-21, 276 pp (Feb. 1976) (Engl. transl. from "Triebwerkslaem", DGLR, Cologne Report DLR...from ZLDI, Munich. N76-24243. 684. Dittrich, W., "Some Technical Problems of Quiet Aircraft Technology", Euro- pean Space Agency, Paris, Franch , In

  16. A Survey On Biometric Security Technologies From Cloud Computing Perspective

    Directory of Open Access Journals (Sweden)

    Shivashish Ratnam

    2015-08-01

    Full Text Available Cloud computing is one of the rising technologies that takes set of connections users to the next level. Cloud is a technology where resources are paid as per usage rather than owned. One of the major challenges in this technology is Security. Biometric systems provide the answer to ensure that the rendered services are accessed only by a legal user or an authorized user and no one else. Biometric systems recognize users based on behavioral or physiological characteristics. The advantages of such systems over traditional validation methods such as passwords and IDs are well known and hence biometric systems are progressively gaining ground in terms of usage. This paper brings about a new replica of a security system where in users have to offer multiple biometric finger prints during Enrollment for a service. These templates are stored at the cloud providers section. The users are authenticated based on these finger print designed templates which have to be provided in the order of arbitrary numbers or imaginary numbers that are generated every time continuously. Both finger prints templates and images are present and they provided every time duration are encrypted or modified for enhanced security.

  17. Natural language processing-based COTS software and related technologies survey.

    Energy Technology Data Exchange (ETDEWEB)

    Stickland, Michael G.; Conrad, Gregory N.; Eaton, Shelley M.

    2003-09-01

    Natural language processing-based knowledge management software, traditionally developed for security organizations, is now becoming commercially available. An informal survey was conducted to discover and examine current NLP and related technologies and potential applications for information retrieval, information extraction, summarization, categorization, terminology management, link analysis, and visualization for possible implementation at Sandia National Laboratories. This report documents our current understanding of the technologies, lists software vendors and their products, and identifies potential applications of these technologies.

  18. Remediation of BTEX contaminated groundwater: best technology assessment between pump&treat and bioremediation by oxygen injection

    Directory of Open Access Journals (Sweden)

    Daniele Baldi

    2012-06-01

    Full Text Available The presence of benzene, toluene, ethylbenzene and xylene (BTEX dissolved in the groundwater and migrated from a light non-aqueous phase liquid (LNAPL source in an alluvial aquifer required a remedial action to be taken by the responsible party as established by the Italian regulation (Legislative Decree 152/06 and subsequent amendments. For such purpose, field investigations were conducted on site in order to define the site conceptual model and to identify the appropriate remediation technology to be applied. The remediation design was developed by means of a flow and reactive transport mathematical model, applied to saturated media, using the numerical codes MODFLOW and RT3D. Groundwater field observations showed evidence of occurring BTEX biodegradation processes by bacteria naturally present in the aquifer. Since such specific bacterial activity would be significantly enhanced by the injection of free oxygen in the aquifer, the performance of traditional pump and treat systems (P&T was assessed and compared with cost/efficiency of reactive oxygen bio-barrier technology (OD. The results showed a clear advantage in terms of cost/efficiency with the application of the OD. This presents an overall cost of about 30% of the P&T installation and maintenance, and it reaches remedial target in a shorter timeframe. Moreover, the system is also applicable as a bioremediation technology in case of Environmental Emergency Measures (MISE. The site examined is part of an industrial plant located in Central Italy.

  19. A Survey of Key Technology of Network Public Opinion Analysis

    Directory of Open Access Journals (Sweden)

    Li Su Ying

    2016-01-01

    Full Text Available The internet has become an important base for internet users to make comments because of its interactivity and fast dissemination. The outbreak of internet public opinion has become a major risk for network information security. Domestic and foreign researchers had carried out extensive and in-depth study on public opinion. Fruitful results have achieved in the basic theory research and emergency handling and other aspects of public opinion. But research on the public opinion in China is still in the initial stage, the key technology of the public opinion analysis is still as a starting point for in-depth study and discussion.

  20. Redefining robot based technologies for elderly people assistance: a survey

    DEFF Research Database (Denmark)

    Pagliarini, Luigi; Lund, Henrik Hautop

    2016-01-01

    , learning-speed, efficiency, short and long-term effect, active vs. passive, etc. We do so by showing the most important existing examples, and by taking into account all the possible factors that might help researchers when thinking of developing appropriate technologies for elderly care, as well as......, for their relative assistance personnel. Indeed, while in rehabilitation robotics, a major role is played by the human-machine interface (HMI) used to gather the patient's intent from biological signals, and convert them into control signals for the robotic artefacts, surprisingly, decades of research have not yet...

  1. Technology in the Pharmacy Learning Environment: Surveys of Use and Misuse

    Directory of Open Access Journals (Sweden)

    Kimberley J. Begley

    2015-01-01

    Full Text Available The use of technology in the classroom may have positive and negative effects on learning. The purpose of this investigation was twofold: to identify the effect technology is having on the pharmacy learning environment; and, to assess students' use of technology during class time for non-academic purposes. This study included a national cross-sectional survey as well as a single, college-specific survey. The national survey had a faculty response rate of 71.2%. Of the responders, approximately 61% identified significant problems related to students' use of technology in the pharmacy learning environment. Cell phones were a recognized concern and more than 90% of programs have chosen to restrict cell phone use in the classroom. The single college survey examining technology use during class for non-academic purposes had a student response rate of 87% and faculty response rate of 100%. Students and faculty members disagreed regarding the negative effects of technology use during class for non-academic purposes. Notably, 16% of students acknowledged their in-class use of technology for non-academic purposes had been disruptive to their learning, as compared to 95.7% of faculty. According to students, common reasons for off-task technology use included checking e-mail/text messages (75.1%, lack of engagement (58.1%, multitasking (56.2%, and accessing social media sites (33%. Faculty and students were asked about enforcement of technology policy. More faculty than students supported policy enforcement by faculty (65.2% versus 22.8%, respectively; p<0.001 as well as policy enforcement by students (78.3% versus 31.9%, respectively; p<0.001. Overall, technology use during class for non-academic purposes was common. Many schools and colleges of pharmacy are developing approaches to address these evolving issues by revising their technology use policies.   Type: Original Research

  2. Environmental Survey preliminary report, Morgantown Energy Technology Center, Morgantown, West Virginia

    Energy Technology Data Exchange (ETDEWEB)

    1988-06-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the US Department of Energy (DOE) Morgantown Energy Technology Center (METC) conducted November 30 through December 4, 1987. In addition, the preliminary findings of the Laramie Project Office (LPO) Survey, which was conducted as part of the METC Survey on January 25 through 29, 1988, are presented in Appendices E and F. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team components are outside experts being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with METC. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. The on-site phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at METC, and interviews with site personnel. The Survey team developed a Sampling and Analysis Plan to assist in further assessing certain environmental problems identified during its on-site activities at METC. The Sampling and Analysis Plan will be executed by the Oak Ridge National Laboratory (ORNL). When completed, the results will be incorporated into the METC Environmental Survey Interim Report. The Interim Report will reflect the final determinations of the Survey METC. 60 refs., 28 figs., 43 tabs.

  3. The future prospect of PV and CSP solar technologies: An expert elicitation survey

    International Nuclear Information System (INIS)

    Bosetti, Valentina; Catenacci, Michela; Fiorese, Giulia; Verdolini, Elena

    2012-01-01

    In this paper we present and discuss the results of an expert elicitation survey on solar technologies. Sixteen leading European experts from the academic world, the private sector and international institutions took part in this expert elicitation survey on Photovoltaic (PV) and Concentrated Solar Power (CSP) technologies. The survey collected probabilistic information on (1) how Research, Development and Demonstration (RD and D) investments will impact the future costs of solar technologies and (2) the potential for solar technology deployment both in OECD and non-OECD countries. Understanding the technological progress and the potential of solar PV and CPS technologies is crucial to draft appropriate energy policies. The results presented in this paper are thus relevant for the policy making process and can be used as better input data in integrated assessment and energy models. - Highlights: ► With constant public support at least one solar technology will become cost-competitive with fossil fuels. ► Demonstration should become a key area of funding. ► Without climate policy (carbon price), by 2030 solar technologies will not be cost-competitive. ► The EU will first achieve a breakthrough in production costs. ► The share of electricity production from solar will never exceed 30%.

  4. Survey of the hypervelocity impact technology and applications.

    Energy Technology Data Exchange (ETDEWEB)

    Chhabildas, Lalit Chandra; Orphal, Dennis L.

    2006-05-01

    HVIS 2005 was a clear success. The Symposium brought together nearly two hundred active researchers and students from thirteen countries around the world. The 84 papers presented at HVIS 2005 constitute an ''update'' on current research and the state-of-the-art of hypervelocity science. Combined with the over 7000 pages of technical papers from the eight previous Symposia, beginning in 1986, all published in the International Journal of Impact Engineering, the papers from HVIS 2005 add to the growing body of knowledge and the progressing state-of-the-art of hypervelocity science. It is encouraging to report that even with the limited funding resources compared to two decades ago, creativity and ingenuity in hypervelocity science are alive and well. There is considerable overlap in different disciplines that allows researchers to leverage. Experimentally, higher velocities are now available in the laboratory and are ideally suited for space applications that can be tied to both civilian (NASA) and DoD military applications. Computationally, there is considerable advancement both in computer and modeling technologies. Higher computing speeds and techniques such as parallel processing allow system level type applications to be addressed directly today, much in contrast to the situation only a few years ago. Needless to say, both experimentally and computationally, the ultimate utility will depend on the curiosity and the probing questions that will be incumbent upon the individual researcher. It is quite satisfying that over two dozen students attended the symposium. Hopefully this is indicative of a good pool of future researchers that will be needed both in the government and civilian industries. It is also gratifying to note that novel thrust areas exploring different and new material phenomenology relevant to hypervelocity impact, but a number of other applications as well, are being pursued. In conclusion, considerable progress is still being

  5. Development of ITM Oxygen Technology for Low-cost and Low-emission Gasification and Other Industrial Applications

    Energy Technology Data Exchange (ETDEWEB)

    Armstrong, Phillip

    2014-11-01

    Air Products is carrying out a scope of work under DOE Award No. DE-FE0012065 “Development of ITM Oxygen Technology for Low-cost and Low-emission Gasification and Other Industrial Applications.” The Statement of Project Objectives (SOPO) includes a Task 4f in which a Decision Point shall be reached, necessitating a review of Tasks 2-5 with an emphasis on Task 4f. This Topical Report constitutes the Decision Point Application pertaining to Task 4f. The SOPO under DOE Award No. DE-FE0012065 is aimed at furthering the development of the Ion Transport Membrane (ITM) Oxygen production process toward a demonstration scale facility known as the Oxygen Development Facility (ODF). It is anticipated that the completion of the current SOPO will advance the technology significantly along a pathway towards enabling the design and construction of the ODF. Development progress on several fronts is critical before an ODF project can commence; this Topical Report serves as an early update on the progress in critical development areas. Progress was made under all tasks, including Materials Development, Ceramic Processing Development, Engineering Development, and Performance Testing. Under Task 4f, Air Products carried out a cost and performance study in which several process design and cost parameters were varied and assessed with a process model and budgetary costing exercise. The results show that the major variables include ceramic module reliability, ITM operating temperature, module production yield, and heat addition strategy. High-temperature compact heat exchangers are shown to contribute significant cost benefits, while directly firing into the feed stream to an ITM are even a mild improvement on the high-temperature recuperation approach. Based on the findings to-date, Air Products recommends no changes to the content or emphasis in the current SOPO and recommends its completion prior to another formal assessment of these factors.

  6. A Survey of Complex Object Technologies for Digital Libraries

    Science.gov (United States)

    Nelson, Michael L.; Argue, Brad; Efron, Miles; Denn, Sheila; Pattuelli, Maria Cristina

    2001-01-01

    Many early web-based digital libraries (DLs) had implicit assumptions reflected in their architecture that the unit of focus in the DL (frequently "reports" or "e-prints") would only be manifested in a single, or at most a few, common file formats such as PDF or PostScript. DLs have now matured to the point where their contents are commonly no longer simple files. Complex objects in DLs have emerged from in response to various requirements, including: simple aggregation of formats and supporting files, bundling additional information to aid digital preservation, creating opaque digital objects for e-commerce applications, and the incorporation of dynamic services with the traditional data files. We examine a representative (but not necessarily exhaustive) number of current and recent historical web-based complex object technologies and projects that are applicable to DLs: Aurora, Buckets, ComMentor, Cryptolopes, Digibox, Document Management Alliance, FEDORA, Kahn-Wilensky Framework Digital Objects, Metadata Encoding & Transmission Standard, Multivalent Documents, Open eBooks, VERS Encapsulated Objects, and the Warwick Framework.

  7. Technology in the Public Library: Results from the 1992 PLDS Survey of Technology.

    Science.gov (United States)

    Fidler, Linda M.; Johnson, Debra Wilcox

    1994-01-01

    Discusses and compares the incorporation of technology by larger public libraries in Canada and the United States. Technology mentioned includes online public access catalogs; remote and local online database searching; microcomputers and software for public use; and fax, voice mail, and Telecommunication Devices for the Deaf and Teletype writer…

  8. A patent survey case: how could technological forecasting help cosmetic chemists with product innovation?

    Science.gov (United States)

    Domicio Da Silva Souza, Ivan; Juliana Pinheiro, Bárbara; Passarini Takahashi, Vania

    2012-01-01

    Patents represent a free and open source of data for studying innovation and forecasting technological trends. Thus, we suggest that new discussions about the role of patent information are needed. To illustrate the relevance of this issue, we performed a survey of patents involving skin care products, which were granted by the United States Patent and Trademark Office (USPTO) between 2006 and 2010, to identify opportunities for innovation and technological trends. We quantified the use of technologies in 333 patents. We plotted a life cycle of technologies related to natural ingredients. We also determined the cross impact of the technologies identified. We observed technologies related to processes applied to cosmetics (2.2%), functional packaging and applicators (2.9%), excipients and active compounds (21.5%), and cosmetic preparations (73.5%). Further, 21.6% of the patents were related to the use of natural ingredients. Several opportunities for innovation were discussed throughout this paper, for example, the use of peptides as active compounds or intracellular carriers (only 3.9% of the technologies in cosmetic preparations). We also observed technological cross impacts that suggested a trend toward multifunctional cosmetics, among others. Patent surveys may help researchers with product innovation because they allow us to identify available and unexplored technologies and turn them into whole new concepts.

  9. [Evaluation of heart impact in the 100 m extreme intensity sport using near-infrared non-invasive muscle oxygen detecting device and sports heart rate detection technology].

    Science.gov (United States)

    Wang, Pei-Yong; Long, Fei-Xiao; Fu, Lan-Ying; Li, Yue; Ding, Hai-Shu; Qu, An-Lian; Zhou, Xiao-Ping

    2010-02-01

    Using continuous two wavelength near-infrared technology to detect the variation in the consistency of oxygen hemoglobin in the muscle and the sports heart rate wireless real time collection technology, we devised the real time muscle tissue oxygenation and instantaneous heart rate experiment scheme and implemented it for the process of the 100 m run with two parameters given simultaneously. The experiment shows that the concentration of the oxygen hemoglobin in the muscle tissue continues decreasing after the end of the 100 m run, and the time interval between the moment when the concentration of the oxygen hemoglobin attains the minimum value and the moment when the athletes finish the 100 m run is (6.65 +/- 1.10) sec; while the heart rate continues increasing after the end of the 100 m run, and the time interval between the moment when the heart rate attains the maximum value and the moment when the athletes finish the 100 m run is (8.00 +/- 1.57) sec. The results show that the two wavelength near-infrared tissue oxygenation detection technology and the sports heart rate real time collection equipment can accurately measure the sports tissue oxygenation and the heart rate in the extreme intensity sport, and reveal the process of muscle oxygen transportation and consumption and its dynamic character with the heart rate in the extreme intensity sport.

  10. Appraisal of Information Technology Requirements in Quantity Surveying Firms in Northern Nigeria

    Directory of Open Access Journals (Sweden)

    Y. U. Datti

    2017-06-01

    Full Text Available A worrisome trend in the adoption of emerging technologies for competitive advantages and improved productivities by QSs have been observed in that there is overwhelming evidence that there is an increasing usage of IT in quantity surveying firms but little or no noticeable benefits on the practice. It however becomes pertinent to ask then, that despite the increases adoption of computing and telecommunication technologies, why isn’t there any noticeable change due to the impacts of IT in the Nigerian Construction Industry with particular reference to Quantity Surveying practices. The study appraised the requirement of IT in quantity surveying practice in Nigeria. It examined the position of IT in quantity surveying firms in terms of its requirement and analyzed IT requirements-based problem constraining quantity surveying firms. The study is a survey research designed to obtain information on information technology in QS firms. A self-administered questionnaire was employed to quantity surveyors in consulting firms for responses. Responses were returned and analyzed using severity index and later ranked in order of importance. The results indicate a high level of computerization of professional services among the firms with greater number of their computers being networked. However, despite high level of networking of available computers, sharing of printers and other scarce tools/technologies are not established. Compared to developed countries such as Canada, Australia, United Kingdom and USA, the position of IT requirements in QS firms in Nigeria can be said to be at basic level with organization possessing and applying basic IT tools and technologies (e.g. scanners, digital cameras, dvd/cd-rom, general purpose software, QS application software, chat programs etc. in their daily operation and processes. While most firms are progressing toward intermediate level by possessing intermediate IT tools and technologies (e.g. teleconferencing

  11. Sensor Web Technology Challenges and Advancements for the Earth Science Decadal Survey Era

    Science.gov (United States)

    Norton, Charles D.; Moe, Karen

    2011-01-01

    This paper examines the Earth science decadal survey era and the role ESTO developed sensor web technologies can contribute to the scientific observations. This includes hardware and software technology advances for in-situ and in-space measurements. Also discussed are emerging areas of importance such as the potential of small satellites for sensor web based observations as well as advances in data fusion critical to the science and societal benefits of future missions, and the challenges ahead.

  12. UST-ID robotics: Wireless communication and minimum conductor technology, and end-point tracking technology surveys

    International Nuclear Information System (INIS)

    Holliday, M.A.

    1993-10-01

    This report is a technology review of the current state-of-the-art in two technologies applicable to the Underground Storage Tank (UST) program at the Hanford Nuclear Reservation. The first review is of wireless and minimal conductor technologies for in-tank communications. The second review is of advanced concepts for independent tool-point tracking. This study addresses the need to provide wireless transmission media or minimum conductor technology for in-tank communications and robot control. At present, signals are conducted via contacting transmission media, i.e., cables. Replacing wires with radio frequencies or invisible light are commonplace in the communication industry. This technology will be evaluated for its applicability to the needs of robotics. Some of these options are radio signals, leaky coax, infrared, microwave, and optical fiber systems. Although optical fiber systems are contacting transmission media, they will be considered because of their ability to reduce the number of conductors. In this report we will identify, evaluate, and recommend the requirements for wireless and minimum conductor technology to replace the present cable system. The second section is a technology survey of concepts for independent end-point tracking (tracking the position of robot end effectors). The position of the end effector in current industrial robots is determined by computing that position from joint information, which is basically a problem of locating a point in three-dimensional space. Several approaches are presently being used in industrial robotics, including: stereo-triangulation with a theodolite network and electrocamera system, photogrammetry, and multiple-length measurement with laser interferometry and wires. The techniques that will be evaluated in this survey are advanced applications of the aforementioned approaches. These include laser tracking (3-D and 5-D), ultrasonic tracking, vision-guided servoing, and adaptive robotic visual tracking

  13. Report on surveys in fiscal 2000 on the surveys and researches in relation to nano-technology; 2000 nendo nano technology ni kakawaru chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    In order to view over the situation surrounding the nano-technology as a whole, surveys and discussions were given by means of questionnaire and open discussion meetings. In the questionnaire, the answer that the products utilizing nano-scale structure have already been, or scheduled to be put on sale has exceeded half of the total answers. Experts view that the nano-technology is infiltrating steadily into the actual society. In view of the applicable fields, and in the opening discussion meetings, drastic innovation was expected in the industrial technologies in the future not too far away as a dream world, by using the 'nano-technology' that utilizes a principle completely different from the principles that have been practically used. In order to achieve that goal, a recognition was made clear that the braeakthrough in other fields is important, and the field crossing fusion such as coordination with academia, and exchanges between different businesses and different fields is important. In the comparison of competitive edges of Japan, America and Europe, Japan was recognized to possess sufficient competitive power, but the sense of crisis is felt toward the latent technological power of America of the future. (NEDO)

  14. Report on surveys in fiscal 2000 on the surveys and researches in relation to nano-technology; 2000 nendo nano technology ni kakawaru chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    In order to view over the situation surrounding the nano-technology as a whole, surveys and discussions were given by means of questionnaire and open discussion meetings. In the questionnaire, the answer that the products utilizing nano-scale structure have already been, or scheduled to be put on sale has exceeded half of the total answers. Experts view that the nano-technology is infiltrating steadily into the actual society. In view of the applicable fields, and in the opening discussion meetings, drastic innovation was expected in the industrial technologies in the future not too far away as a dream world, by using the 'nano-technology' that utilizes a principle completely different from the principles that have been practically used. In order to achieve that goal, a recognition was made clear that the braeakthrough in other fields is important, and the field crossing fusion such as coordination with academia, and exchanges between different businesses and different fields is important. In the comparison of competitive edges of Japan, America and Europe, Japan was recognized to possess sufficient competitive power, but the sense of crisis is felt toward the latent technological power of America of the future. (NEDO)

  15. Characterization of Patient Interest in Provider-Based Consumer Health Information Technology: Survey Study.

    Science.gov (United States)

    Featherall, Joseph; Lapin, Brittany; Chaitoff, Alexander; Havele, Sonia A; Thompson, Nicolas; Katzan, Irene

    2018-04-19

    Consumer health information technology can improve patient engagement in their health care and assist in navigating the complexities of health care delivery. However, the consumer health information technology offerings of health systems are often driven by provider rather than patient perspectives and inadequately address patient needs, thus limiting their adoption by patients. Consideration given to patients as stakeholders in the development of such technologies may improve adoption, efficacy, and consumer health information technology resource allocation. The aims of this paper were to measure patient interest in different health system consumer health information technology apps and determine the influence of patient characteristics on consumer health information technology interest. Patients seen at the Cleveland Clinic Neurological Institute were electronically surveyed on their interest in using different consumer health information technology apps. A self-efficacy scale, Patient Health Questionnaire-9 depression screen, and EuroQol 5 dimensions health-related quality of life scale were also completed by patients. Logistic regression was used to determine the influence of patient characteristics on interest in consumer health information technology in the categories of self-management, education, and communication. The majority of 3852 patient respondents had an interest in all technology categories assessed in the survey. The highest interest was in apps that allow patients to ask questions of providers (3476/3852, 90.24%) and to schedule appointments (3211/3839, 83.64%). Patient interest in consumer health information technology was significantly associated with greater depression symptoms, worse quality of life, greater health self-efficacy, and smartphone ownership (Pinformation technology development and their perspectives should consistently guide development efforts. Health systems should consider focusing on consumer health information technologies

  16. Development of an aquaculture system using nanobubble technology for the optimation of dissolved oxygen in culture media for nile tilapia (Oreochromis niloticus)

    Science.gov (United States)

    Mahasri, G.; Saskia, A.; Apandi, P. S.; Dewi, N. N.; Rozi; Usuman, N. M.

    2018-04-01

    The purpose of this research was to discover the process of enrichment of dissolved oxygen in fish cultivation media using nanobubble technology. This study was conducted with two treatments, namely a cultivation media without fish and a cultivation media containing 8 fish with an average body length of 24.5 cm. The results showed that the concentration of dissolved oxygen increased from 6.5 mg/L to 25 mg/L. The rate of increase in dissolved oxygen concentration for 30 minutes is 0.61 pp/minute. The rate of decrease in dissolved oxygen concentration in treatment 1 is 3.08 ppm/day and in treatment 2 is 0.23 ppm/minute. It was concluded that nanobubble is able to increase dissolved oxygen.

  17. Emerging Technologies and Techniques for Wide Area Radiological Survey and Remediation

    Energy Technology Data Exchange (ETDEWEB)

    Sutton, M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Zhao, P. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-03-24

    Technologies to survey and decontaminate wide-area contamination and process the subsequent radioactive waste have been developed and implemented following the Chernobyl nuclear power plant release and the breach of a radiological source resulting in contamination in Goiania, Brazil. These civilian examples of radioactive material releases provided some of the first examples of urban radiological remediation. Many emerging technologies have recently been developed and demonstrated in Japan following the release of radioactive cesium isotopes (Cs-134 and Cs-137) from the Fukushima Dai-ichi nuclear power plant in 2011. Information on technologies reported by several Japanese government agencies, such as the Japan Atomic Energy Agency (JAEA), the Ministry of the Environment (MOE) and the National Institute for Environmental Science (NIES), together with academic institutions and industry are summarized and compared to recently developed, deployed and available technologies in the United States. The technologies and techniques presented in this report may be deployed in response to a wide area contamination event in the United States. In some cases, additional research and testing is needed to adequately validate the technology effectiveness over wide areas. Survey techniques can be deployed on the ground or from the air, allowing a range of coverage rates and sensitivities. Survey technologies also include those useful in measuring decontamination progress and mapping contamination. Decontamination technologies and techniques range from non-destructive (e.g., high pressure washing) and minimally destructive (plowing), to fully destructive (surface removal or demolition). Waste minimization techniques can greatly impact the long-term environmental consequences and cost following remediation efforts. Recommendations on technical improvements to address technology gaps are presented together with observations on remediation in Japan.

  18. DEVELOPMENT OF REACTION-DRIVEN IONIC TRANSPORT MEMBRANES (ITMs) TECHNOLOGY: PHASE IV/BUDGET PERIOD 6 “Development of ITM Oxygen Technology for Integration in IGCC and Other Advanced Power Generation Systems”

    Energy Technology Data Exchange (ETDEWEB)

    David, Studer

    2012-03-01

    Air Products and Chemicals, along with development participants and in association with the U.S. Department of Energy, has made substantial progress in developing a novel air separation technology. Unlike conventional cryogenic processes, this method uses high-temperature ceramic membranes to produce high-purity oxygen. The membranes selectively transport oxygen ions with high flux and infinite theoretical selectivity. Reaction-driven ceramic membranes are fabricated from non-porous, multi-component metallic oxides, operate at temperatures typically over 700°C, and have exceptionally high oxygen flux and selectivity. Oxygen from low-pressure air permeates as oxygen ions through the ceramic membrane and is consumed through chemical reactions, thus creating a chemical driving force that pulls oxygen ions across the membrane at high rates. The oxygen reacts with a hydrocarbon fuel in a partial oxidation process to produce a hydrogen and carbon monoxide mixture – synthesis gas. This project expands the partial-oxidation scope of ITM technology beyond natural gas feed and investigates the potential for ITM reaction-driven technology to be used in conjunction with gasification and pyrolysis technologies to provide more economical routes for producing hydrogen and synthesis gas. This report presents an overview of the ITM reaction-driven development effort, including ceramic materials development, fabrication and testing of small-scale ceramic modules, ceramic modeling, and the investigation of gasifier integration schemes

  19. A survey of clinical performance skills requirements in medical radiation technology

    International Nuclear Information System (INIS)

    Rowntree, P.A.; Veitch, J.D.

    1993-01-01

    This paper outlines the reasons behind carry out a study of clinical performance skills requirements and the method being used to gather data. It describes the changes which have occurred in radiographer education in Queensland, the broader impact brought about by changes in professional body requirements and the development of a Competency based Standards Document for the profession. The paper provides examples of the survey design and layout being developed for distribution to third year students in the Medical Imaging Technology major of the Bachelor of Applied Science (Medical Radiation Technology) Queensland University of Technology, graduates and clinical departments in Queensland. 1 tab., 1 fig

  20. Uses of technology in lower secondary mathematics education : a concise topical survey

    NARCIS (Netherlands)

    Drijvers, P.H.M.; Ball, Lynda; Barzel, Barbel; Heid, M. Kathleen; Cao, Yiming; Maschietto, Michela

    2016-01-01

    This topical survey provides an overview of the current state of the art in technology use in mathematics education, including both practice-oriented experiences and research-based evidence, as seen from an international perspective. Three core themes are discussed: Evidence of effectiveness;

  1. CECE: Expanding the Envelope of Deep Throttling Technology in Liquid Oxygen/Liquid Hydrogen Rocket Engines for NASA Exploration Missions

    Science.gov (United States)

    Giuliano, Victor J.; Leonard, Timothy G.; Lyda, Randy T.; Kim, Tony S.

    2010-01-01

    As one of the first technology development programs awarded by NASA under the Vision for Space Exploration, the Pratt & Whitney Rocketdyne (PWR) Deep Throttling, Common Extensible Cryogenic Engine (CECE) program was selected by NASA in November 2004 to begin technology development and demonstration toward a deep throttling, cryogenic engine supporting ongoing trade studies for NASA s Lunar Lander descent stage. The CECE program leverages the maturity and previous investment of a flight-proven hydrogen/oxygen expander cycle engine, the PWR RL10, to develop and demonstrate an unprecedented combination of reliability, safety, durability, throttlability, and restart capabilities in high-energy, cryogenic, in-space propulsion. The testbed selected for the deep throttling demonstration phases of this program was a minimally modified RL10 engine, allowing for maximum current production engine commonality and extensibility with minimum program cost. Four series of demonstrator engine tests have been successfully completed between April 2006 and April 2010, accumulating 7,436 seconds of hot fire time over 47 separate tests. While the first two test series explored low power combustion (chug) and system instabilities, the third test series investigated and was ultimately successful in demonstrating several mitigating technologies for these instabilities and achieved a stable throttling ratio of 13:1. The fourth test series significantly expanded the engine s operability envelope by successfully demonstrating a closed-loop control system and extensive transient modeling to enable lower power engine starting, faster throttle ramp rates, and mission-specific ignition testing. The final hot fire test demonstrated a chug-free, minimum power level of 5.9%, corresponding to an overall 17.6:1 throttling ratio achieved. In total, these tests have provided an early technology demonstration of an enabling cryogenic propulsion concept with invaluable system-level technology data

  2. Successful implementation of new technologies in nursing care: a questionnaire survey of nurse-users.

    Science.gov (United States)

    de Veer, Anke J E; Fleuren, Margot A H; Bekkema, Nienke; Francke, Anneke L

    2011-10-27

    A growing number of new technologies are becoming available within nursing care that can improve the quality of care, reduce costs, or enhance working conditions. However, such effects can only be achieved if technologies are used as intended. The aim of this study is to gain a better understanding of determinants influencing the success of the introduction of new technologies as perceived by nursing staff. The study population is a nationally representative research sample of nursing staff (further referred to as the Nursing Staff Panel), of whom 685 (67%) completed a survey questionnaire about their experiences with recently introduced technologies. Participants were working in Dutch hospitals, psychiatric organizations, care organizations for mentally disabled people, home care organizations, nursing homes or homes for the elderly. Half of the respondents were confronted with the introduction of a new technology in the last three years. Only half of these rated the introduction of the technology as positive.The factors most frequently mentioned as impeding actual use were related to the (kind of) technology itself, such as malfunctioning, ease of use, relevance for patients, and risks to patients. Furthermore nursing staff stress the importance of an adequate innovation strategy. A prerequisite for the successful introduction of new technologies is to analyse determinants that may impede or enhance the introduction among potential users. For technological innovations special attention has to be paid to the (perceived) characteristics of the technology itself.

  3. US Geological Survey National Computer Technology Meeting; Proceedings, Phoenix, Arizona, November 14-18, 1988

    Science.gov (United States)

    Balthrop, Barbara H.; Terry, J.E.

    1991-01-01

    The U.S. Geological Survey National Computer Technology Meetings (NCTM) are sponsored by the Water Resources Division and provide a forum for the presentation of technical papers and the sharing of ideas or experiences related to computer technology. This report serves as a proceedings of the meeting held in November, 1988 at the Crescent Hotel in Phoenix, Arizona. The meeting was attended by more than 200 technical and managerial people representing all Divisions of the U.S. Geological Survey.Scientists in every Division of the U.S. Geological Survey rely heavily upon state-of-the-art computer technology (both hardware and sofnuare). Today the goals of each Division are pursued in an environment where high speed computers, distributed communications, distributed data bases, high technology input/output devices, and very sophisticated simulation tools are used regularly. Therefore, information transfer and the sharing of advances in technology are very important issues that must be addressed regularly.This report contains complete papers and abstracts of papers that were presented at the 1988 NCTM. The report is divided into topical sections that reflect common areas of interest and application. In each section, papers are presented first followed by abstracts. For these proceedings, the publication of a complete paper or only an abstract was at the discretion of the author, although complete papers were encouraged.Some papers presented at the 1988 NCTM are not published in these proceedings.

  4. Survey and studies on the roles of nuclear power development in economy and technology

    International Nuclear Information System (INIS)

    1985-01-01

    The development and utilization of nuclear energy is principally for security of energy supplies but, on the other hand, is contributing largely to the economic activities and technology developments in Japan. In order to clarify the economic and the technological roles played by the nuclear energy development and utilization, Atomic Energy Commission has made survey and studies on the present state of nuclear power industry and of nuclear power technology and the respective effects in other areas. The nuclear power industry, through its high growth, is now a substantial portion, and so has significant influence, in Japan's whole economic activities. Then, the nuclear power technology, started with its introduction, is now on the world's leading level. Its effects in other areas include quality control, system technology, etc. (Mori, K.)

  5. Technology survey for real-time monitoring of plutonium in a vitrifier off-gas system

    International Nuclear Information System (INIS)

    Berg, J.M.; Veirs, D.K.

    1996-01-01

    We surveyed several promising measurement technologies for the real-time monitoring of plutonium in a vitrifier off-gas system. The vitrifier is being developed by Westinghouse Savannah River Corp. and will be used to demonstrate vitrification of plutonium dissolved in nitric acid for fissile material disposition. The risk of developing a criticality hazard in the off-gas processing equipment can be managed by using available measurement technologies. We identified several potential technologies and methods for detecting plutonium that are sensitive enough to detect the accumulation of a mass sufficient to form a criticality hazard. We recommend gross alpha-monitoring technologies as the most promising option for Westinghouse Savannah River Corp. to consider because that option appears to require the least additional development. We also recommend further consideration for several other technologies because they offer specific advantages and because gross alpha-monitoring could prove unsuitable when tested for this specific application

  6. Fall prevention intervention technologies: A conceptual framework and survey of the state of the art.

    Science.gov (United States)

    Hamm, Julian; Money, Arthur G; Atwal, Anita; Paraskevopoulos, Ioannis

    2016-02-01

    In recent years, an ever increasing range of technology-based applications have been developed with the goal of assisting in the delivery of more effective and efficient fall prevention interventions. Whilst there have been a number of studies that have surveyed technologies for a particular sub-domain of fall prevention, there is no existing research which surveys the full spectrum of falls prevention interventions and characterises the range of technologies that have augmented this landscape. This study presents a conceptual framework and survey of the state of the art of technology-based fall prevention systems which is derived from a systematic template analysis of studies presented in contemporary research literature. The framework proposes four broad categories of fall prevention intervention system: Pre-fall prevention; Post-fall prevention; Fall injury prevention; Cross-fall prevention. Other categories include, Application type, Technology deployment platform, Information sources, Deployment environment, User interface type, and Collaborative function. After presenting the conceptual framework, a detailed survey of the state of the art is presented as a function of the proposed framework. A number of research challenges emerge as a result of surveying the research literature, which include a need for: new systems that focus on overcoming extrinsic falls risk factors; systems that support the environmental risk assessment process; systems that enable patients and practitioners to develop more collaborative relationships and engage in shared decision making during falls risk assessment and prevention activities. In response to these challenges, recommendations and future research directions are proposed to overcome each respective challenge. Copyright © 2016 The Authors. Published by Elsevier Inc. All rights reserved.

  7. Is the Sky Falling? New Technology, Changing Media, and the Future of Surveys

    Directory of Open Access Journals (Sweden)

    Mick P. Couper

    2013-12-01

    Full Text Available In this paper I review three key technology-related trends: 1 big data, 2 non-probability samples, and 3 mobile data collection. I focus on the implications of these trends for survey research and the research profession. With regard to big data, I review a number of concerns that need to be addressed, and argue for a balanced and careful evaluation of the role that big data can play in the future. I argue that these developments are unlikely to replace transitional survey data collection, but will supplement surveys and expand the range of research methods. I also argue for the need for the survey research profession to adapt to changing circumstances.

  8. Educational technology for millennial dental hygiene students: a survey of U.S. dental hygiene programs.

    Science.gov (United States)

    Beebe, Catherine R R; Gurenlian, JoAnn R; Rogo, Ellen J

    2014-06-01

    A growing body of literature suggests that today's learners have changed and education must change as well since Millennial generation students expect technology to be used in their coursework. This study sought to determine what educational technology is being used in U.S. dental hygiene programs, what student and faculty perceptions are of the effectiveness of technology, and what barriers exist to implementing educational technology. A stratified random sample of 120 entry-level dental hygiene programs nationwide were invited to participate in a survey. Fourteen programs participated, yielding a pool of 415 potential individual participants; out of those, eighty-four student and thirty-eight faculty respondents were included in the analysis, a total of 122. Results were analyzed using descriptive statistics and a Mann-Whitney U test (peducational technology in all areas except clickers and wikis. The faculty members tended to rate the effectiveness of educational technology higher than did the students. The greatest perceived barrier to implementing technology was technical difficulties. This study suggests that support services should be available to faculty and students to ensure successful implementation of technology. Dental hygiene educators have adopted many types of educational technology, but more data are needed to determine best practices.

  9. Communications Technology and Motor Neuron Disease: An Australian Survey of People With Motor Neuron Disease.

    Science.gov (United States)

    Mackenzie, Lynette; Bhuta, Prarthna; Rusten, Kim; Devine, Janet; Love, Anna; Waterson, Penny

    2016-01-25

    People with Motor Neuron Disease (MND), of which amyotrophic lateral sclerosis (ALS) is the most common form in adults, typically experience difficulties with communication and disabilities associated with movement. Assistive technology is essential to facilitate everyday activities, promote social support and enhance quality of life. This study aimed to explore the types of mainstream and commonly available communication technology used by people with MND including software and hardware, to identify the levels of confidence and skill that people with MND reported in using technology, to determine perceived barriers to the use of technology for communication, and to investigate the willingness of people with MND to adopt alternative modes of communication. An on-line survey was distributed to members of the New South Wales Motor Neuron Disease Association (MND NSW). Descriptive techniques were used to summarize frequencies of responses and cross tabulate data. Free-text responses to survey items and verbal comments from participants who chose to undertake the survey by telephone were analyzed using thematic analysis. Responses from 79 MND NSW members indicated that 15-21% had difficulty with speaking, writing and/or using a keyboard. Commonly used devices were desktop computers, laptops, tablets and mobile phones. Most participants (84%) were connected to the Internet and used it for email (91%), to find out more about MND (59%), to follow the news (50%) or for on-line shopping (46%). A third of respondents used Skype or its equivalent, but few used this to interact with health professionals. People with MND need greater awareness of technology options to access the most appropriate solutions. The timing for people with MND to make decisions about technology is critical. Health professionals need skills and knowledge about the application of technology to be able to work with people with MND to select the best communication technology options as early as possible

  10. Bottom Dissolved Oxygen Maps From SEAMAP Summer and Fall Groundfish/Shrimp Surveys from 1982 to 1998 (NCEI Accession 0155488)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Bottom dissolved oxygen (DO) data was extracted from environmental profiles acquired during the Southeast Fisheries Science Center Mississippi Laboratories summer...

  11. Science and technology related global problems: An international survey of science educators

    Science.gov (United States)

    Bybee, Rodger W.; Mau, Teri

    This survey evaluated one aspect of the Science-Technology-Society theme, namely, the teaching of global problems related to science and technology. The survey was conducted during spring 1984. Two hundred sixty-two science educators representing 41 countries completed the survey. Response was 80%. Findings included a ranking of twelve global problems (the top six were: World Hunger and Food Resources, Population Growth, Air Quality and Atmosphere, Water Resources, War Technology, and Human Health and Disease). Science educators generally indicated the following: the science and technology related global problems would be worse by the year 2000; they were slightly or moderately knowledgeable about the problems; print, audio-visual media, and personal experiences were their primary sources of information; it is important to study global problems in schools; emphasis on global problems should increase with age/grade level; an integrated approach should be used to teach about global problems; courses including global problems should be required of all students; most countries are in the early stages of developing programs including global problems; there is a clear trend toward S-T-S; there is public support for including global problems; and, the most significant limitations to implementation of the S-T-S theme (in order of significance) are political, personnel, social, psychological, economic, pedagogical, and physical. Implications for research and development in science education are discussed.

  12. Utilization of dashboard technology in academic radiology departments: results of a national survey.

    Science.gov (United States)

    Mansoori, Bahar; Novak, Ronald D; Sivit, Carlos J; Ros, Pablo R

    2013-04-01

    The aim of this study was to identify the most widely used financial, productivity, and accessibility metrics used by academic radiology departments (ARDs) in a dashboard format via a national survey. The results provide a guide to the selection of preferred or commonly used indicators to facilitate dashboard implementation and use. The study met the criteria for an exemption from institutional review board approval. A cross-sectional survey was conducted using a survey approved by the Society of Chairs of Academic Radiology Departments and sent to its members. The survey was designed to evaluate the adoption, access, and composition of dashboard technology in ARDs, particularly those related to measures of productivity and financial performance. The overall response rate was 42% (56 of 131 members). Sixty-two percent of responding ARDs currently use some form of dashboard technology, but 50% have used this technology for ≤2 years. Sixty-five percent of all ARDs use their dashboard information on a monthly basis. The two dashboard financial indicators most frequently used by ARDs are revenue and actual expenses. Similarly, the two productivity indicators used most widely are total examination volume and examination volume per modality. The two most important access indicators used are report turnaround time and backlog per unit time. Currently, fewer than two-thirds of the responding ARDs use dashboard technology, and one-half have used the technology for ≤2 years. Although some fiscal and productivity indices are more frequently used, there are a diverse number of factors used to measure productivity, finance, access, and other operational parameters in ARD dashboards. Thus, the information provided by each institutional dashboard may be significantly different from that in other ARDs. Copyright © 2013 American College of Radiology. Published by Elsevier Inc. All rights reserved.

  13. Survey on the use of CAD-CAM technology by UK and Irish dental technicians.

    Science.gov (United States)

    Blackwell, E; Nesbit, M; Petridis, H

    2017-05-12

    Statement of the problem Digital workflows (CAD/CAM) have been introduced in dentistry during recent years. No published information exists on dental technicians' use and reporting of this technology.Purpose The aim of this cross sectional survey was to identify the extent digital technology has infiltrated the workplace and to investigate the factors affecting the use of CAD-CAM technology by dental laboratory technicians within Ireland and the UK.Materials and methods A web-based questionnaire was composed (Opinio, Object Planet Inc. Oslo, Norway) and distributed to UK and Irish dental technicians. Answers to all questions were anonymous and grouped such that general information was gathered initially, followed by branching of the survey into two sections depending on whether or not the respondent worked with CAD-CAM technology. Results were compiled and statistical analysis (Fisher's Exact test, SPSS, IBM, Armonk, New York, USA) was performed in order to investigate any correlation between various demographic variables and the answers provided.Results The survey was distributed to 760 UK technicians and 77 Irish technicians. The total number of completed surveys was 105, which yielded a total response rate of 14%. Most technicians reported using some form of CAD/CAM aspect in the workflow, and this was more significant for technicians working in large laboratories. Most training received was company-led. Large laboratories were also significantly correlated with less outsourcing of CAD/CAM work and a change in dental material use leading to the increase of zirconia and the decrease of noble alloys. Dental technicians did not report any significant change in working relationships and staffing as a result of CAD/CAM incorporation. High initial investment cost was the most common reason quoted from non-users, along with the lack of such technology in their working environment.

  14. A Survey of Intelligent Control and Health Management Technologies for Aircraft Propulsion Systems

    Science.gov (United States)

    Litt, Jonathan S.; Simon, Donald L.; Garg, Sanjay; Guo, Ten-Heui; Mercer, Carolyn; Behbahani, Alireza; Bajwa, Anupa; Jensen, Daniel T.

    2005-01-01

    Intelligent Control and Health Management technology for aircraft propulsion systems is much more developed in the laboratory than in practice. With a renewed emphasis on reducing engine life cycle costs, improving fuel efficiency, increasing durability and life, etc., driven by various government programs, there is a strong push to move these technologies out of the laboratory and onto the engine. This paper describes the existing state of engine control and on-board health management, and surveys some specific technologies under development that will enable an aircraft propulsion system to operate in an intelligent way--defined as self-diagnostic, self-prognostic, self-optimizing, and mission adaptable. These technologies offer the potential for creating extremely safe, highly reliable systems. The technologies will help to enable a level of performance that far exceeds that of today s propulsion systems in terms of reduction of harmful emissions, maximization of fuel efficiency, and minimization of noise, while improving system affordability and safety. Technologies that are discussed include various aspects of propulsion control, diagnostics, prognostics, and their integration. The paper focuses on the improvements that can be achieved through innovative software and algorithms. It concentrates on those areas that do not require significant advances in sensors and actuators to make them achievable, while acknowledging the additional benefit that can be realized when those technologies become available. The paper also discusses issues associated with the introduction of some of the technologies.

  15. Survey on the succession situation of technologies; Gijutsu keisho jokyo chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-03-01

    The basic survey was carried out to promote the succession and creative use of the previous industrial science and technology. The following 5 themes were summarized in fiscal 1993. On `Fuel technology policy and technological development,` Navy Fuel Depot, Chemical Research Institute at University of Kyoto, Central Laboratory of South Manchuria Railway Co., and Fuel Research Laboratory of the Ministry of Agriculture and Commerce played important roles, and the 1000atm continuous hydrogenation system was completed in 1941. On `Technology of long-distance power transmission,` high-voltage insulation technology finally reached an international level after World War II. On `Unification of frequency and electrical technology,` the two-frequency system for eastern and western areas was established before World War II, and construction of Sakuma Frequency Conversion Station allowed power interchange between two areas. On `Organization of national research laboratories,` the Agency of Industrial Science and Technology distinguished the roles of new and existing laboratories. On `Wind power technology in Europe and America,` comparison between American and Danish approaches is the most important issue today. 146 refs., 20 figs., 13 tabs.

  16. A Survey of Rural Hospitals’ Perspectives on Health Information Technology Outsourcing

    Science.gov (United States)

    Johnson, Nicholas; Murphy, Alison; McNeese, Nathan; Reddy, Madhu; Purao, Sandeep

    2013-01-01

    A survey of rural hospitals was conducted in the spring of 2012 to better understand their perspectives on health information technology (HIT) outsourcing and the role that hospital-to-hospital HIT partnerships (HHPs) can play as an outsourcing mechanism. The survey sought to understand how HHPs might be leveraged for HIT implementation, as well as the challenges with forming them. The results suggest that HHPs have the potential to address rural hospitals’ slow rate of HIT adoption, but there are also challenges to creating these partnerships. These issues, as well as avenues for further research, are then discussed. PMID:24551373

  17. A survey of rural hospitals' perspectives on health information technology outsourcing.

    Science.gov (United States)

    Johnson, Nicholas; Murphy, Alison; McNeese, Nathan; Reddy, Madhu; Purao, Sandeep

    2013-01-01

    A survey of rural hospitals was conducted in the spring of 2012 to better understand their perspectives on health information technology (HIT) outsourcing and the role that hospital-to-hospital HIT partnerships (HHPs) can play as an outsourcing mechanism. The survey sought to understand how HHPs might be leveraged for HIT implementation, as well as the challenges with forming them. The results suggest that HHPs have the potential to address rural hospitals' slow rate of HIT adoption, but there are also challenges to creating these partnerships. These issues, as well as avenues for further research, are then discussed.

  18. iPads, mobile technologies, and communication applications: a survey of family wants, needs, and preferences.

    Science.gov (United States)

    Meder, Allison M; Wegner, Jane R

    2015-03-01

    Families of children with communication disabilities were surveyed to explore wants and preferences relative to mobile media technology, including iPads, as a form of augmentative and alternative communication (AAC). The families surveyed reported wanting information and support from professionals, including speech language pathologists (SLPs), who are knowledgeable about AAC. These families wanted devices to meet their children's individual needs and reported that ease of use and affordability were the most influential characteristics in the purchase of mobile media devices and communication applications. SLPs who understand family decision making can utilize collaborative clinical decision making that respects families' wants and needs, while also focusing on device feature matching and family education.

  19. Survey of subsurface treatment technologies for environmental restoration sites at Sandia National Laboratories, New Mexico.

    Energy Technology Data Exchange (ETDEWEB)

    McGrath, Lucas K.; Ho, Clifford Kuofei; Wright, Jerome L.

    2003-08-01

    This report provides a survey of remediation and treatment technologies for contaminants of concern at environmental restoration (ER) sites at Sandia National Laboratories, New Mexico. The sites that were evaluated include the Tijeras Arroyo Groundwater, Technical Area V, and Canyons sites. The primary contaminants of concern at these sites include trichloroethylene (TCE), tetrachloroethylene (PCE), and nitrate in groundwater. Due to the low contaminant concentrations (close to regulatory limits) and significant depths to groundwater ({approx}500 feet) at these sites, few in-situ remediation technologies are applicable. The most applicable treatment technologies include monitored natural attenuation and enhanced bioremediation/denitrification to reduce the concentrations of TCE, PCE, and nitrate in the groundwater. Stripping technologies to remove chlorinated solvents and other volatile organic compounds from the vadose zone can also be implemented, if needed.

  20. Geographic information technology monitoring and mapping of coal fires in Ukraine, according to the space survey

    Energy Technology Data Exchange (ETDEWEB)

    Pivnyak, G.; Busygin, B.; Garkusha, I. [National Mining Univ., Dnipropetrovsk (Ukraine)

    2010-07-01

    Coal fires are a significant problem around the world, particularly in China, India, and the United States. Coal fires burn thousands of tons of coal reserves and lead to serious problems for the environment, degradation and destruction of landscape, and harm public health. Technology, such as spectrology analysis of signatures with high temperature activity can be used to calculate vegetation algorithms and soil indexes, and multispectral survey data in the thermal channels of scanners. This paper presented the perspectives of technology development in coal fires and the approach to the detection, monitoring, and quantitative estimation of coal fires by the instruments using geographic information systems. Specifically, the paper considered the use of coal fire fragment monitoring technology from data of a diachronous survey obtained by Landsat satellites, to classify dangerous coal waste banks of the Donbass Mine located in Ukraine. The paper provided a description of the study area and discussed the detection technology of temperature-active waste banks. It was concluded that geoinformation technology provides an opportunity to effectively mark mining dumps, in particular, waste banks in multispectrum space images made by Landsat satellites. 7 refs., 6 figs.

  1. A survey on draught animal technology (DAT) in EN-Nhoud area, North Kordofan State, Sudan.

    Science.gov (United States)

    Makki, Elsamawal Khalil; Musa, Ezdehar Omer Mohammed

    2011-06-01

    Draught animal technology (DAT) can potentially play a central role in agriculture transformation for traditional farmers. This study surveyed the state of DAT in En-Nhoud area, North Kordofan State, Sudan in an attempt to have a clear view of the changes brought about by introducing the technology. The study followed the cross-sectional survey design. Farmers were selected from ten clusters (villages) and data were collected using questionnaires and face to face interviews with farmers in addition to group discussions with them and the different actors in the field. The results showed that farmers appreciate the role played by DAT, but they highlighted the need for further capacity building and technical backup. Harnessing issues are not well understood and applied by the farmers. The different actors involved in DAT in the area lack networking and coordination, and this reflected on the many problems and constraints faced by the farmers.

  2. A State-of-the-Art Survey of Indoor Positioning and Navigation Systems and Technologies

    Directory of Open Access Journals (Sweden)

    Wilson Sakpere

    2017-12-01

    Full Text Available The research and use of positioning and navigation technologies outdoors has seen a steady and exponential growth. Based on this success, there have been attempts to implement these technologies indoors, leading to numerous studies. Most of the algorithms, techniques and technologies used have been implemented outdoors. However, how they fare indoors is different altogether. Thus, several technologies have been proposed and implemented to improve positioning and navigation indoors. Among them are Infrared (IR, Ultrasound, Audible Sound, Magnetic, Optical and Vision, Radio Frequency (RF, Visible Light, Pedestrian Dead Reckoning (PDR/Inertial Navigation System (INS and Hybrid. The RF technologies include Bluetooth, Ultra-wideband (UWB, Wireless Sensor Network (WSN, Wireless Local Area Network (WLAN, Radio-Frequency Identification (RFID and Near Field Communication (NFC. In addition, positioning techniques applied in indoor positioning systems include the signal properties and positioning algorithms. The prevalent signal properties are Angle of Arrival (AOA, Time of Arrival (TOA, Time Difference of Arrival (TDOA and Received Signal Strength Indication (RSSI, while the positioning algorithms are Triangulation, Trilateration, Proximity and Scene Analysis/ Fingerprinting. This paper presents a state-of-the-art survey of indoor positioning and navigation systems and technologies, and their use in various scenarios. It analyses distinct positioning technology metrics such as accuracy, complexity, cost, privacy, scalability and usability. This paper has profound implications for future studies of positioning and navigation.

  3. Clinical Computer Systems Survey (CLICS): learning about health information technology (HIT) in its context of use.

    Science.gov (United States)

    Lichtner, Valentina; Cornford, Tony; Klecun, Ela

    2013-01-01

    Successful health information technology (HIT) implementations need to be informed on the context of use and on users' attitudes. To this end, we developed the CLinical Computer Systems Survey (CLICS) instrument. CLICS reflects a socio-technical view of HIT adoption, and is designed to encompass all members of the clinical team. We used the survey in a large English hospital as part of its internal evaluation of the implementation of an electronic patient record system (EPR). The survey revealed extent and type of use of the EPR; how it related to and integrated with other existing systems; and people's views on its use, usability and emergent safety issues. Significantly, participants really appreciated 'being asked'. They also reminded us of the wider range of administrative roles engaged with EPR. This observation reveals pertinent questions as to our understanding of the boundaries between administrative tasks and clinical medicine - what we propose as the field of 'administrative medicine'.

  4. Demonstration of a Cylinder-Fill System Based on Solid Electrolyte Oxygen Separator (SEOS) Technology: One Year Early Field Assessment at a USAF Maintenance Facility

    Science.gov (United States)

    2011-02-01

    governed by the Nernst equation : )ln( 4 , , 2 2 cathodeO anodeO N p p F RTV = (1) Removal of the oxygen product from the anode side of the...technology requires applied voltages higher than the Nernst voltage, VN. This overpotential increases the productivity per cell. However, the increased

  5. Report on preceding surveys and researches in fiscal 1999. Surveys and researches on the next generation cold emission technology; 1999 nendo jisedai cold emission gijutsu no chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    The cold emission (CE) technology must be developed as the base technology to realize the next generation flat panel displays, fluorescent display tubes, communication use microwave tubes, electron microscopes, electric power conversion elements, image photographing tubes, and different kinds of sensors. Therefore, this paper describes surveys and researches performed on technological problems and technological seeds in a hyperfine processing technology for cold emitters, and technologies to control, evaluate and simulate solid surface of cold emitters. Different kinds of applied devices that can be realized by using the CE technology are also surveyed and researched. Section 1 summarizes the progress in information communicating technologies and the changes in terminal utilization environment. Section 2 describes the application of a display technology for information terminals and a cold cathode. Section 3 investigates elementary technologies for developing electric field radiation display. Section 4 investigates physics and an evaluation technology for the next generation cold cathode. Section 5 describes the result of the investigations re-commissioned to Tsukuba University for measuring microscopic work function on solid surface by using the scanning probe process. Section 6 proposes a research and development project for the 'next generation CE technology'. (NEDO)

  6. Fiscal 2000 survey report on technological trends. Survey on trend of high-density energy beam technology concerning conservation of energy; 2000 nendo gijutsu doko nado chosa hokokusho. Energy shiyo gorika ni kakawaru komitsudo energy beam technology no doko chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    There is a possibility that machining technology using high-density energy beam will bring an epoch-making change to micro-nano area processing. In particular, a laser beam having high controllability is indispensable. This is a report of the fiscal 2000 survey. The survey was conducted on laser beam generation, control and nano-diagnostic techniques, micro-nano optics technologies and machining technologies, with the development problems and targets summarized. Laser beam generation/control technologies, which become the basic tools for micro-nano manufacturing, were investigated, as were inspection technologies for the purpose of checking the functions of nano structures created. Particularly, the investigation elucidated the significance of development of a femtosecond solid state laser based on a semiconductor laser and the control techniques of their phase. Further, necessity was emphasized in developing X-ray probing, infrared and terahertz spectroscopy which are essential for nano-diagnostic techniques. In optics technologies, the paper described the importance of photonic crystals which enable less-than-wavelength machining or electrical beam control using interference effect. The possibility of fabricating photocatalysts with nano-particles was also mentioned, as was the manufacturing of nano-functional structures. (NEDO)

  7. Survey of history/succession of industrial technology. Book of survey of the domestic industrial technology which contributed greatly to the industrial development; Sangyo gijutsu rekishi keisho chosa. Sangyo no hatten ni okiku kiyoshita kokunai sangyo gijutsu no chosahen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper surveyed a history of the industrial technology development which contributed to the innovation of technology in Japan for contribution to the future selection of technical themes and decision on developmental methods. In accordance with the increasing contribution of the Japanese industrial technology to scientific and economic activities in Japan and abroad, it is important to clarify a historical significance of the industrial technology and to make the most of results of the survey for the future succession/development of industrial technology. The survey focused on chemical processes brought up as the Japanese industrial technology which is regarded as world-famous and on the systematical study of the history of the Japanese scientific technology. Hereafter, this becomes a guiding principle for engineers. The paper arranged the survey results of production processes of 2-ethylhexanol, acrylic acid, acrylamide, and cresol/resorcinol, optical resolution process of amino acids, and flue gas desulfurization process. The paper also surveyed technologies of ammonia synthesis, coal liquefaction, high polymer film production and synthesis of medical raw materials. The results were obtained which are suggestive for developing creative/original technology. 210 refs., 93 figs., 49 tabs.

  8. A survey on LPWA technology: LoRa and NB-IoT

    Directory of Open Access Journals (Sweden)

    Rashmi Sharan Sinha

    2017-03-01

    Full Text Available By 2020, more than twenty five billion devices would be connected through wireless communications. In accordance with the rapid growth of the internet of things (IoT market, low power wide area (LPWA technologies have become popular. In various LPWA technologies, narrowband (NB-IoT and long range (LoRa are two leading technologies. In this paper, we provide a comprehensive survey on NB-IoT and LoRa as efficient solutions connecting the devices. It is shown that unlicensed LoRa has advantages in terms of battery lifetime, capacity, and cost. Meanwhile, licensed NB-IoT offers benefits in terms of QoS, latency, reliability, and range.

  9. The US Department of Energy hydrogen baseline survey: assessing knowledge and opinions about hydrogen technology

    International Nuclear Information System (INIS)

    Christy Cooper; Tykey Truett; R L Schmoyer

    2006-01-01

    To design and maintain its education program, the United States Department of Energy (DOE) Hydrogen Program conducted a statistically-valid national survey to measure knowledge and opinions of hydrogen among key target audiences. The Hydrogen Baseline Knowledge Survey provides a reference for designing the DOE hydrogen education strategy and will be used in comparisons with future surveys to measure changes in knowledge and opinions over time. The survey sampled four U.S. populations: (1) public; (2) students; (3) state and local government officials; and (4) potential large-scale hydrogen end-users in three business categories. Questions measured technical understanding of hydrogen and opinions about hydrogen safety. Other questions assessed visions of the likelihood of future hydrogen applications and sources of energy information. Several important findings were discovered, including a striking lack of technical understanding across all survey groups, as well as a strong correlation between technical knowledge and opinions about safety: those who demonstrated an understanding of hydrogen technologies expressed the least fear of its safe use. (authors)

  10. Learning to teach mathematics with technology: A survey of professional development needs, experiences and impacts

    Science.gov (United States)

    Bennison, Anne; Goos, Merrilyn

    2010-04-01

    The potential for digital technologies to enhance students' mathematics learning is widely recognised, and use of computers and graphics calculators is now encouraged or required by secondary school mathematics curriculum documents throughout Australia. However, previous research indicates that effective integration of technology into classroom practice remains patchy, with factors such as teacher knowledge, confidence, experience and beliefs, access to resources, and participation in professional development influencing uptake and implementation. This paper reports on a large-scale survey of technology-related professional development experiences and needs of Queensland secondary mathematics teachers. Teachers who had participated in professional development were found to be more confident in using technology and more convinced of its benefits in supporting students' learning of mathematics. Experienced, specialist mathematics teachers in large metropolitan schools were more likely than others to have attended technology-related professional development, with lack of time and limited access to resources acting as hindrances to many. Teachers expressed a clear preference for professional development that helps them meaningfully integrate technology into lessons to improve student learning of specific mathematical topics. These findings have implications for the design and delivery of professional development that improves teachers' knowledge, understanding, and skills in a diverse range of contexts.

  11. Game Changing Development Program - Next Generation Life Support Project: Oxygen Recovery From Carbon Dioxide Using Ion Exchange Membrane Electrolysis Technology

    Science.gov (United States)

    Burke, Kenneth A.; Jiao, Feng

    2016-01-01

    This report summarizes the Phase I research and development work performed during the March 13, 2015 to July 13, 2016 period. The proposal for this work was submitted in response to NASA Research Announcement NNH14ZOA001N, "Space Technology Research, Development, Demonstration, and Infusion 2014 (SpaceTech-REDDI-2014)," Appendix 14GCD-C2 "Game Changing Development Program, Advanced Oxygen Recovery for Spacecraft Life Support Systems Appendix" The Task Agreement for this Phase I work is Document Control Number: GCDP-02-TA-15015. The objective of the Phase I project was to demonstrate in laboratories two Engineering Development Units (EDU) that perform critical functions of the low temperature carbon dioxide electrolysis and the catalytic conversion of carbon monoxide into carbon and carbon dioxide. The low temperature carbon dioxide electrolysis EDU was built by the University of Delaware with Dr. Feng Jiao as the principal investigator in charge of this EDU development (under NASA Contract NNC15CA04C). The carbon monoxide catalytic conversion EDU was built by the NASA Glenn Research Center with Kenneth Burke as the principal investigator and overall project leader for the development of both EDUs. Both EDUs were successfully developed and demonstrated the critical functions for each process. The carbon dioxide electrolysis EDU was delivered to the NASA Johnson Space Center and the carbon monoxide catalytic conversion EDU was delivered to the NASA Marshall Spaceflight Center.

  12. Report on the surveys in fiscal 1999. Surveys on foundations for establishing industrial technology strategies (Strategies by fields - Bio technology field); 1999 nendo sangyo gijutsu senryaku sakutei kiban chosa hokokusho. Bun'yabetsu gijutsu senryaku (Bio technology bun'ya)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    In order to deal with strengthening of competitive power in the bio-technological field and social requirements thereon, it was intended to establish target setting, ways to achieve the objectives, and technological strategies including extraction of policy problems, by combining the wisdom possessed by industries, governmental organizations, and academic world. Section 1 describes the result of the surveys on establishing technological strategies by fields. America tackles importantly with matters related to life science. Japan is strong in fermentation technologies, bio-reactors, and enzyme engineering. Japan stands nearly equal, or is slightly inferior to America in clone livestocks and bio-sensors. Japan's competitiveness is very low in such advanced technology fields as gene therapies, gene combined agricultural products, bio-agricultural chemicals, gene exploration technologies, and gene diagnosis. Section 2 describes technological strategies in four fields. To explain, the improvement in foundations to raise efficiencies in research and development and industrialization processes, strategies to place importance on such industrial fields as realizing 'wishes of people for happiness of diversified nature', the improvement of the environment in which people and societies can enjoy benefits brought about by growth of the industries, and structuring of institutions to promote industrialization of bio-technologies for the nation as a whole. (NEDO)

  13. Digital Technology in the protection of cultural heritage Bao Fan Temple mural digital mapping survey

    Directory of Open Access Journals (Sweden)

    Y. Zheng

    2015-08-01

    Full Text Available Peng Xi county, Sichuan province, the Bao Fan temple mural digitization survey mapping project: we use three-dimensional laserscanning, multi-baseline definition digital photography, multi-spectral digital image acquisition and other technologies for digital survey mapping. The purpose of this project is to use modern mathematical reconnaissance mapping means to obtain accurate mural shape, color, quality and other data. Combined with field investigation and laboratory analysis results, and based on a comprehensive survey and study, a comprehensive analysis of the historical Bao Fan Temple mural artistic and scientific value was conducted. A study of the mural’s many qualities (structural, material, technique, preservation environment, degradation, etc. reveal all aspects of the information carried by the Bao Fan Temple mural. From multiple angles (archeology, architecture, surveying, conservation science and other disciplines an assessment for the Bao Fan Temple mural provides basic data and recommendations for conservation of the mural. In order to achieve the conservation of cultural relics in the Bao Fan Temple mural digitization survey mapping process, we try to apply the advantages of three-dimensional laser scanning equipment. For wall murals this means obtaining three-dimensional scale data from the scan of the building and through the analysis of these data to help determine the overall condition of the settlement as well as the deformation of the wall structure. Survey analysis provides an effective set of conclusions and suggestions for appropriate mural conservation. But before data collection, analysis and research need to first to select the appropriate scanning equipment, set the appropriate scanning accuracy and layout position of stations necessary to determine the scope of required data. We use the fine features of the three-dimensional laser scanning measuring arm to scan the mural surface deformation degradation to reflect

  14. Digital Technology in the protection of cultural heritage Bao Fan Temple mural digital mapping survey

    Science.gov (United States)

    Zheng, Y.

    2015-08-01

    Peng Xi county, Sichuan province, the Bao Fan temple mural digitization survey mapping project: we use three-dimensional laserscanning, multi-baseline definition digital photography, multi-spectral digital image acquisition and other technologies for digital survey mapping. The purpose of this project is to use modern mathematical reconnaissance mapping means to obtain accurate mural shape, color, quality and other data. Combined with field investigation and laboratory analysis results, and based on a comprehensive survey and study, a comprehensive analysis of the historical Bao Fan Temple mural artistic and scientific value was conducted. A study of the mural's many qualities (structural, material, technique, preservation environment, degradation, etc.) reveal all aspects of the information carried by the Bao Fan Temple mural. From multiple angles (archeology, architecture, surveying, conservation science and other disciplines) an assessment for the Bao Fan Temple mural provides basic data and recommendations for conservation of the mural. In order to achieve the conservation of cultural relics in the Bao Fan Temple mural digitization survey mapping process, we try to apply the advantages of three-dimensional laser scanning equipment. For wall murals this means obtaining three-dimensional scale data from the scan of the building and through the analysis of these data to help determine the overall condition of the settlement as well as the deformation of the wall structure. Survey analysis provides an effective set of conclusions and suggestions for appropriate mural conservation. But before data collection, analysis and research need to first to select the appropriate scanning equipment, set the appropriate scanning accuracy and layout position of stations necessary to determine the scope of required data. We use the fine features of the three-dimensional laser scanning measuring arm to scan the mural surface deformation degradation to reflect the actual state of

  15. Mobile Technology Use Across Age Groups in Patients Eligible for Cardiac Rehabilitation: Survey Study.

    Science.gov (United States)

    Gallagher, Robyn; Roach, Kellie; Sadler, Leonie; Glinatsis, Helen; Belshaw, Julie; Kirkness, Ann; Zhang, Ling; Gallagher, Patrick; Paull, Glenn; Gao, Yan; Partridge, Stephanie Ruth; Parker, Helen; Neubeck, Lis

    2017-10-24

    Emerging evidence indicates mobile technology-based strategies may improve access to secondary prevention and reduce risk factors in cardiac patients. However, little is known about cardiac patients' use of mobile technology, particularly for health reasons and whether the usage varies across patient demographics. This study aimed to describe cardiac patients' use of mobile technology and to determine variations between age groups after adjusting for education, employment, and confidence with using mobile technology. Cardiac patients eligible for attending cardiac rehabilitation were recruited from 9 hospital and community sites across metropolitan and rural settings in New South Wales, Australia. Participants completed a survey on the use of mobile technology devices, features used, confidence with using mobile technology, willingness and interest in learning, and health-related use. The sample (N=282) had a mean age of 66.5 (standard deviation [SD] 10.6) years, 71.9% (203/282) were male, and 79.0% (223/282) lived in a metropolitan area. The most common diagnoses were percutaneous coronary intervention (33.3%, 94/282) and myocardial infarction (22.7%, 64/282). The majority (91.1%, 257/282) used at least one type of technology device, 70.9% (200/282) used mobile technology (mobile phone/tablet), and 31.9% (90/282) used all types. Technology was used by 54.6% (154/282) for health purposes, most often to access information on health conditions (41.4%, 117/282) and medications (34.8%, 98/282). Age had an important independent association with the use of mobile technology after adjusting for education, employment, and confidence. The youngest group (mobile technology than the oldest (>69 years) age group (odds ratio [OR] 4.45, 95% CI 1.46-13.55), 5 times more likely to use mobile apps (OR 5.00, 95% CI 2.01-12.44), and 3 times more likely to use technology for health-related reasons (OR 3.31, 95% CI 1.34-8.18). Compared with the older group, the middle age group (56

  16. Surveying wearable human assistive technology for life and safety critical applications: standards, challenges and opportunities.

    Science.gov (United States)

    Alam, Muhammad Mahtab; Ben Hamida, Elyes

    2014-05-23

    In this survey a new application paradigm life and safety for critical operations and missions using wearable Wireless Body Area Networks (WBANs) technology is introduced. This paradigm has a vast scope of applications, including disaster management, worker safety in harsh environments such as roadside and building workers, mobile health monitoring, ambient assisted living and many more. It is often the case that during the critical operations and the target conditions, the existing infrastructure is either absent, damaged or overcrowded. In this context, it is envisioned that WBANs will enable the quick deployment of ad-hoc/on-the-fly communication networks to help save many lives and ensuring people's safety. However, to understand the applications more deeply and their specific characteristics and requirements, this survey presents a comprehensive study on the applications scenarios, their context and specific requirements. It explores details of the key enabling standards, existing state-of-the-art research studies, and projects to understand their limitations before realizing aforementioned applications. Application-specific challenges and issues are discussed comprehensively from various perspectives and future research and development directions are highlighted as an inspiration for new innovative solutions. To conclude, this survey opens up a good opportunity for companies and research centers to investigate old but still new problems, in the realm of wearable technologies, which are increasingly evolving and getting more and more attention recently.

  17. Virtual reality technology and surgical training--a survey of general surgeons in Ireland.

    Science.gov (United States)

    Early, S A; Roche-Nagle, G

    2006-01-01

    Virtual Reality Technology (VRT) is a validated method of training in industry but only recently has found a place in the postgraduate surgical curriculum. We surveyed 143 Irish consultant surgeons to ascertain their opinions on this topical issue. The survey consisted of 22 questions to which the consultants were asked to respond by choosing from a 5-point Likert scale. Sixty-five per cent responded. A majority of 72% had seen VRT but only 47% had 'hands on' experience. Forty-six per cent believed that they were poorly informed regarding available technologies. As consultants became more informed about VRT significant differences were seen with regard to attitudes regarding the role of VR in skills in surgical training (p<0.05) and in the ability to define teaching objectives (p<0.005). Our survey suggests that the underuse of the current offerings is not due to a perceived lack of interest on the part of the surgical trainers. Suppliers of these programmes have a responsibility to adequately educate and collaborate with all parties involved to improve overall benefit from these simulators.

  18. Technology use among adults who are deaf and hard of hearing: a national survey.

    Science.gov (United States)

    Maiorana-Basas, Michella; Pagliaro, Claudia M

    2014-07-01

    As society becomes increasingly more dependent on technology, information regarding the use, preference, and accessibility of commonly used devices and services among individuals who are deaf and hard of hearing (DHH) is crucial. Developing technologies that are functional and appropriately accessible allows persons who are DHH to fully participate in society, education, and business while also providing opportunities for personal and professional advancement. Although a few international studies have addressed the technology use of individuals who are DHH, none exist that focus on the needs, preferences, and accessibility of current Internet- and mobile-based technologies. Consequently, a national survey was conducted in the United States to determine the preference, frequency of use, and accessibility of various technologies (hardware, software, Web sites) by adults who are DHH and living in the United States. Findings indicate frequent use of smartphones and personal computers, specifically for text-based communication and web surfing, and little use of Teletypewriter/Telecommunications Device for the Deaf. Web site feature preferences include pictures and text, and captions over signed translations. Some results varied by demographics. © The Author 2014. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  19. Capability assessment and challenges for quantum technology gravity sensors for near surface terrestrial geophysical surveying

    Science.gov (United States)

    Boddice, Daniel; Metje, Nicole; Tuckwell, George

    2017-11-01

    Geophysical surveying is widely used for the location of subsurface features. Current technology is limited in terms of its resolution (thus size of features it can detect) and penetration depth and a suitable technique is needed to bridge the gap between shallow near surface investigation using techniques such as EM conductivity mapping and GPR commonly used to map the upper 5 m below ground surface, and large features at greater depths detectable using conventional microgravity (> 5 m below ground surface). This will minimise the risks from unknown features buried in and conditions of the ground during civil engineering work. Quantum technology (QT) gravity sensors potentially offer a step-change in technology for locating features which lie outside of the currently detectable range in terms of size and depth, but that potential is currently unknown as field instruments have not been developed. To overcome this, a novel computer simulation was developed for a large range of different targets of interest. The simulation included realistic noise modelling of instrumental, environmental and location sources of noise which limit the accuracy of current microgravity measurements, in order to assess the potential capability of the new QT instruments in realistic situations and determine some of the likely limitations on their implementation. The results of the simulations for near surface features showed that the new technology is best employed in a gradiometer configuration as opposed to the traditional single sensor gravimeter used by current instruments due to the ability to suppress vibrational environmental noise effects due to common mode rejection between the sensors. A significant improvement in detection capability of 1.5-2 times was observed, putting targets such as mineshafts into the detectability zone which would be a major advantage for subsurface surveying. Thus this research, for the first time, has demonstrated clearly the benefits of QT gravity

  20. A Survey of Online and Mobile Technology Use at Peer Support Agencies.

    Science.gov (United States)

    Aschbrenner, Kelly A; Naslund, John A; Grinley, Thomas; Bienvenida, John Carlo M; Bartels, Stephen J; Brunette, Mary

    2018-01-04

    Understanding how individuals with mental illness who receive services at peer support agencies use technology can inform the development of online and mobile health interventions tailored for users in these non-traditional mental health settings. The purpose of this study was to assess the use of technology among individuals with mental illness at peer support agencies. A survey delivered within peer support agencies (PSAs) in one state assessed technology use among individuals ages 18 and over with a self-identified mental illness receiving services at these agencies. In total, 195 individuals from 10 PSAs completed the survey. Eighty-two percent of respondents used the internet, with 63% of respondents connected to the internet at the PSAs. Eighty one percent of respondents owned a cell phone, 70% used text messaging, 58% owned smartphones, 61% used mobile applications, and 72% used social media. PSA users under age 55 were significantly more likely to own a smartphone than PSA users age 55 and older. Among internet users, 71% had searched for health information online and 57% had searched for mental health information online. Many individuals who receive services at PSAs have access to online and mobile technologies. These technologies may be leveraged to expand the reach of evidence-based health and mental health programs to individuals in these non-traditional mental health settings. Future research should explore the feasibility of intervention strategies that involve PSAs as a resource for linking people with mental illness to online and mobile support for their health and wellness goals.

  1. Using Digital Technology to Engage and Communicate with Patients: A Survey of Patient Attitudes.

    Science.gov (United States)

    Jenssen, Brian P; Mitra, Nandita; Shah, Anand; Wan, Fei; Grande, David

    2016-01-01

    As primary care moves toward a system of population health management, providers will need to engage patients outside traditional office-based interactions. We assessed patient attitudes regarding technology use to communicate with their primary care team or to engage with other patients outside typical office settings. Design/Participants/Main Measures We conducted a national survey using GfK KnowledgePanel(®) to examine attitudes on the use of digital technology (email, text messaging, and social media such as Facebook and Twitter) to communicate with primary care teams about health behavior goals and test results. We also assessed attitudes toward the use of digital technologies to engage with other patients in activities such as peer coaching. Of the 5119 panel members invited to participate, 3336 completed the survey (response rate, 65.2 %). Among respondents, more than half (58 %) reported using Facebook, and nearly two-thirds (64.1 %) used text messaging. Overall, few participants were willing to communicate about health goals via social media (3.1 %) or text messaging (13.3 %), compared to email (48.8 %) or phone (75.5 %) (results were similar for communication about test results). Among those that used text messaging, race/ethnicity was the only factor independently associated with greater support for text messaging [African American (OR 1.44; 95 % CI, 1.01-2.06) and Hispanic (OR 1.8; 95 % CI, 1.25-2.59)] in multivariate models. Participants interested in engaging in peer coaching through Facebook (11.7 %) were more likely to be younger (p digital technology such as text messaging and social media, few participants supported using these tools for communicating with their physicians' practice. Participants were most supportive of using email for communication. Contrary to previous studies, among users of technology, low socioeconomic status and racial/ethnic minorities were equally or more likely to support use.

  2. The use of mobile technology in health libraries: a summary of a UK-based survey.

    Science.gov (United States)

    Chamberlain, David; Elcock, Martin; Puligari, Preeti

    2015-12-01

    Health libraries have changed over the past fifteen years in the format of the information they provide. This is driven by developments in technology. To conduct a survey of NHS health libraries in the United Kingdom in order to summarise how mobile technologies are being used, how they are promoted and how they are delivered, highlighting good practice and solutions to issues. An online survey was carried out in 2013 and sent to academic and NHS web-based discussion lists. There were 199 responses. Main replies were from large Acute Hospital Trusts. Only 18% of respondents had conducted research into use of mobile technology (MT) within their Trust. Forty per cent of Trusts offered clinical point of care tools, 29% mobile catalogues, and 30% had mobile enabled web sites. Libraries utilised third-party partnerships rather than develop their own applications or tools. Seventy per cent of Trusts promoted new MT services via e-mail. Network restrictions were the main barrier to development as well as finance and expertise. Uptake and development of MT is sporadic and driven by individuals. There is an opportunity for collaboration and sharing resources and expertise. There are benefits to adopting user-friendly resources. © 2015 Health Libraries Group.

  3. SLJ's Technology Survey 2006: New Technologies--Like Blogs and Wikis--Are Taking Their Place in the School Media Center

    Science.gov (United States)

    Brewer, Sally; Milam, Peggy

    2006-01-01

    This article presents findings from the School Library Journal's 2006 national technology survey that investigated the trend in today's library media centers. As this study demonstrates, technology continues to be a significant aspect of K-12 media centers. Despite restricted funding and schedules stretched to the limit, media specialists have…

  4. The future of the provision process for mobility assistive technology: a survey of providers.

    Science.gov (United States)

    Dicianno, Brad E; Joseph, James; Eckstein, Stacy; Zigler, Christina K; Quinby, Eleanor J; Schmeler, Mark R; Schein, Richard M; Pearlman, Jon; Cooper, Rory A

    2018-03-20

    The purpose of this study was to evaluate the opinions of providers of mobility assistive technologies to help inform a research agenda and set priorities. This survey study was anonymous and gathered opinions of individuals who participate in the process to provide wheelchairs and other assistive technologies to clients. Participants were asked to rank the importance of developing various technologies and rank items against each other in terms of order of importance. Participants were also asked to respond to several open-ended questions or statements. A total of 161 providers from 35 states within the USA consented to participation and completed the survey. This survey revealed themes of advanced wheelchair design, assistive robotics and intelligent systems, human machine interfaces and smart device applications. It also outlined priorities for researchers to provide continuing education to clients and providers. These themes will be used to develop research and development priorities. Implications for Rehabilitation • Research in advanced wheelchair design is needed to facilitate travel and environmental access with wheelchairs and to develop alternative power sources for wheelchairs.• New assistive robotics and intelligent systems are needed to help wheelchairs overcome obstacles or self-adjust, assist wheelchair navigation in the community, assist caregivers and transfers, and aid ambulation.• Innovations in human machine interfaces may help advance the control of mobility devices and robots with the brain, eye movements, facial gesture recognition or other systems.• Development of new smart devices is needed for better control of the environment, monitoring activity and promoting healthy behaviours.

  5. Human Factors Process Task Analysis Liquid Oxygen Pump Acceptance Test Procedure for the Advanced Technology Development Center

    Science.gov (United States)

    Diorio, Kimberly A.

    2002-01-01

    A process task analysis effort was undertaken by Dynacs Inc. commencing in June 2002 under contract from NASA YA-D6. Funding was provided through NASA's Ames Research Center (ARC), Code M/HQ, and Industrial Engineering and Safety (IES). The John F. Kennedy Space Center (KSC) Engineering Development Contract (EDC) Task Order was 5SMA768. The scope of the effort was to conduct a Human Factors Process Failure Modes and Effects Analysis (HF PFMEA) of a hazardous activity and provide recommendations to eliminate or reduce the effects of errors caused by human factors. The Liquid Oxygen (LOX) Pump Acceptance Test Procedure (ATP) was selected for this analysis. The HF PFMEA table (see appendix A) provides an analysis of six major categories evaluated for this study. These categories include Personnel Certification, Test Procedure Format, Test Procedure Safety Controls, Test Article Data, Instrumentation, and Voice Communication. For each specific requirement listed in appendix A, the following topics were addressed: Requirement, Potential Human Error, Performance-Shaping Factors, Potential Effects of the Error, Barriers and Controls, Risk Priority Numbers, and Recommended Actions. This report summarizes findings and gives recommendations as determined by the data contained in appendix A. It also includes a discussion of technology barriers and challenges to performing task analyses, as well as lessons learned. The HF PFMEA table in appendix A recommends the use of accepted and required safety criteria in order to reduce the risk of human error. The items with the highest risk priority numbers should receive the greatest amount of consideration. Implementation of the recommendations will result in a safer operation for all personnel.

  6. Overview and outlook on muon survey tomography based on micromegas detectors for unreachable sites technology

    Directory of Open Access Journals (Sweden)

    Roche I. Lázaro

    2016-01-01

    Full Text Available The present document describes the functioning principles of the Muon Survey Tomography based on Micromegas detectors for Unreachable Sites Technology and its distinguishing features from other Micromegas-like detectors. Additionally, it addresses the challenges found while operating the first generation and the resulting improvements. Currently, the project Temporal Tomography of the Densitometry by the Measurement of Muons is focused on obtaining a reliable pulse from the micromesh, associated to the passing of a muon, in order to trigger the acquisition and operate in standalone mode. An outlook of the future steps of the project is provided as well.

  7. Surveying and optical tooling technologies combined to align a skewed beamline at the LAMPF accelerator

    International Nuclear Information System (INIS)

    Bauke, W.; Clark, D.A.; Trujillo, P.B.

    1985-01-01

    Optical Tooling evolved from traditional surveying, and both technologies are sometimes used interchangeably in large industrial installations, since the instruments and their specialized adapters and supports complement each other well. A unique marriage of both technologies was accomplished in a novel application at LAMPF, the Los Alamos Meson Physics Facility. LAMPF consists of a linear accelerator with multiple target systems, one of which had to be altered to accommodate a new beamline for a neutrino experiment. The new line was to be installed into a crowded beam tunnel and had to be skewed and tilted in compound angles to avoid existing equipment. In this paper we describe how Optical Tooling was used in conjunction with simple alignment and reference fixtures to set fiducials on the magnets and other mechanical components of the beamline, and how theodolites and sight levels were then adapted to align these components along the calculated skew planes. Design tolerances are compared with measured alignment results

  8. Overview of Instructional Technology Used in the Education of Occupational Therapy Students: A Survey Study

    Directory of Open Access Journals (Sweden)

    Bryan M. Gee

    2017-10-01

    Full Text Available The purpose of this study was to explore the type of instructional technology (IT master’s degree level occupational therapy educational programs routinely use as a part of their lecture- and laboratory-based instruction. Surveying the administrators of 121 graduate occupational therapy programs in the United States, we found that the majority of the respondents identified their program as using IT in some form for lecturebased courses, with less inclusion of IT for laboratory-based courses. Hybrid instruction, with the majority of the content being delivered face-to-face and the remainder via online, were the trends among the respondents. The findings also indicated that the respondents’ programs avoid certain IT, including synchronous online chat rooms or instant messaging, digital image collections, blogs or online journaling, Wikis, and audio/video podcasting. Few of the respondents said their programs had made a significant leap into implementing a larger online presence with instructional technology

  9. Development and Application of the Key Technologies for the Quality Control and Inspection of National Geographical Conditions Survey Products

    Science.gov (United States)

    Zhao, Y.; Zhang, L.; Ma, W.; Zhang, P.; Zhao, T.

    2018-04-01

    The First National Geographical Condition Survey is a predecessor task to dynamically master basic situations of the nature, ecology and human activities on the earth's surface and it is the brand-new mapping geographic information engineering. In order to ensure comprehensive, real and accurate survey results and achieve the quality management target which the qualified rate is 100 % and the yield is more than 80 %, it is necessary to carry out the quality control and result inspection for national geographical conditions survey on a national scale. To ensure that achievement quality meets quality target requirements, this paper develops the key technology method of "five-in-one" quality control that is constituted by "quality control system of national geographical condition survey, quality inspection technology system, quality evaluation system, quality inspection information management system and national linked quality control institutions" by aiming at large scale, wide coverage range, more undertaking units, more management levels, technical updating, more production process and obvious regional differences in the national geographical condition survey and combining with novel achievement manifestation, complicated dependency, more special reference data, and large data size. This project fully considering the domestic and foreign related research results and production practice experience, combined with the technology development and the needs of the production, it stipulates the inspection methods and technical requirements of each stage in the quality inspection of the geographical condition survey results, and extends the traditional inspection and acceptance technology, and solves the key technologies that are badly needed in the first national geographic survey.

  10. Current status and perceived needs of information technology in Critical Access Hospitals: a survey study

    Directory of Open Access Journals (Sweden)

    George Demiris

    2007-01-01

    Full Text Available The US Congress established the designation of Critical Access Hospitals in 1997, recognising rural hospitals as vital links to health for rural and underserved populations. The intent of the reimbursement system is to improve financial performance, thereby reducing hospital closures. Informatics applications are thought to be tools that can enable the sustainability of such facilities. The aim of this study is to identify the current use of information and communication technology in Critical Access Hospitals, and to assess their readiness and receptiveness for the use of new software and hardware applications and their perceived information technology (IT needs. A survey was mailed to the administrators of all Critical Access Hospitals in one US state (Missouri and a reminder was mailed a few weeks later. Twenty-seven out of 33 surveys were filled out and returned (response rate 82%. While most respondents (66.7% stated that their employees have been somewhat comfortable in using new technology, almost 15% stated that their employees have been somewhat uncomfortable. Similarly, almost 12% of the respondents stated that they themselves felt somewhat uncomfortable introducing new technology. While all facilities have computers, only half of them have a specific IT plan. Findings indicate that Critical Access Hospitals are often struggling with lack of resources and specific applications that address their needs. However, it is widely recognised that IT plays an essential role in the sustainability of their organisations. The study demonstrates that IT applications have to be customised to address the needs and infrastructure of the rural settings in order to be accepted and properly utilised.

  11. Independent Verification Survey Report For Zone 1 Of The East Tennessee Technology Park In Oak Ridge, Tennessee

    International Nuclear Information System (INIS)

    King, David A.

    2012-01-01

    Oak Ridge Associated Universities (ORAU) conducted in-process inspections and independent verification (IV) surveys in support of DOE's remedial efforts in Zone 1 of East Tennessee Technology Park (ETTP) in Oak Ridge, Tennessee. Inspections concluded that the remediation contractor's soil removal and survey objectives were satisfied and the dynamic verification strategy (DVS) was implemented as designed. Independent verification (IV) activities included gamma walkover surveys and soil sample collection/analysis over multiple exposure units (EUs)

  12. Oxygen Extraction from Minerals

    Science.gov (United States)

    Muscatello, Tony

    2017-01-01

    Oxygen, whether used as part of rocket bipropellant or for astronaut life support, is a key consumable for space exploration and commercialization. In Situ Resource Utilization (ISRU) has been proposed many times as a method for making space exploration more cost effective and sustainable. On planetary and asteroid surfaces the presence of minerals in the regolith that contain oxygen is very common, making them a potential oxygen resource. The majority of research and development for oxygen extraction from minerals has been for lunar regolith although this work would generally be applicable to regolith at other locations in space. This presentation will briefly survey the major methods investigated for oxygen extraction from regolith with a focus on the current status of those methods and possible future development pathways. The major oxygen production methods are (1) extraction from lunar ilmenite (FeTiO3) with either hydrogen or carbon monoxide, (2) carbothermal reduction of iron oxides and silicates with methane, and (3) molten regolith electrolysis (MRE) of silicates. Methods (1) and (2) have also been investigated in a two-step process using CO reduction and carbon deposition followed by carbothermal reduction. All three processes have byproducts that could also be used as resources. Hydrogen or carbon monoxide reduction produce iron metal in small amounts that could potentially be used as construction material. Carbothermal reduction also makes iron metal along with silicon metal and a glass with possible applications. MRE produces iron, silicon, aluminum, titanium, and glass, with higher silicon yields than carbothermal reduction. On Mars and possibly on some moons and asteroids, water is present in the form of mineral hydrates, hydroxyl (-OH) groups on minerals, andor water adsorbed on mineral surfaces. Heating of the minerals can liberate the water which can be electrolyzed to provide a source of oxygen as well. The chemistry of these processes, some key

  13. Fiscal 1997 survey report. Subtask 9 (hydrogen utilization worldwide clean energy system technology) (WE-NET) (survey/study on the innovative and leading technology); 1997 nendo seika hokokusho. Suiso riyo kokusai clean energy system gijutsu (WE-NET) subtask 9 kakushinteki, sendoteki gijutsu ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    For the purpose of giving useful suggestions/proposals to the course of WE-NET and contributing to the R and D, conducted were survey/collection/evaluation of new technologies. The paper described the fiscal 1997 results. The number of the proposals of new technology accumulated during fiscal 1993 to 1997 is 28. The proposals of new technology made in fiscal 1997 are hydrogen production effectively using solar energy by wavelength zone, hydrogen storage using fullerene, and the methanol power generation turbine system. Four technologies proposed in fiscal 1996 and 1997 were evaluated. The evaluation method requires two steps of the marking using the analytic hierarchy process (AHP) and the adjustment by the committee. The highly evaluated proposals out of those having been made were analysis/evaluation of hydrogen-oxygen internal-combustion Stirling engine, hydrogen production effectively using solar energy by wavelength zone, hydrogen production by solid oxide electrolysis, magnetic refrigeration method for hydrogen liquefaction, hydrogen production technology using photocatalyst, etc. The paper also stated the result of studying concepts of innovative/leading technologies in fiscal 1996. 4 figs., 29 tabs.

  14. Maintaining Continuity of Knowledge (CoK) of Spent Fuel Pools: Tool Survey - Scenarios, Technology Considerations, and Evaluation Criteria

    Energy Technology Data Exchange (ETDEWEB)

    Benz, Jacob M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Tanner, Jennifer E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Smart, Heidi A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); MacDougall, Matthew R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-01-18

    The objective of this report is to identify the foundational elements which will drive the survey and evaluation of potential technologies to be considered to maintain CoK of spent fuel within a pool in the potential absence of light or in low light scenarios. These foundational elements include identifying use cases that highlight the type of environments in which the technologies may be asked to operate; the CoK elements required of the technologies, such as unique identification or presence/absence identification; the functional and operational requirements for the technologies; and the criteria against which the technologies will be evaluated.

  15. Survey of advanced radiation technologies used at designated cancer care hospitals in Japan

    International Nuclear Information System (INIS)

    Shikama, Naoto; Tsujino, Kayoko; Nakamura, Katsumasa; Ishikura, Satoshi

    2014-01-01

    Our survey assessed the use of advanced radiotherapy technologies at the designated cancer care hospitals in Japan, and we identified several issues to be addressed. We collected the data of 397 designated cancer care hospitals, including information on staffing in the department of radiation oncology (e.g. radiation oncologists, medical physicists and radiation therapists), the number of linear accelerators and the implementation of advanced radiotherapy technologies from the Center for Cancer Control and Information Services of the National Cancer Center, Japan. Only 53% prefectural designated cancer care hospitals and 16% regional designated cancer care hospitals have implemented intensity-modulated radiotherapy for head and neck cancers, and 62% prefectural designated cancer care hospitals and 23% regional designated cancer care hospitals use intensity-modulated radiotherapy for prostate cancer. Seventy-four percent prefectural designated cancer care hospitals and 40% regional designated cancer care hospitals employ stereotactic body radiotherapy for lung cancer. Our multivariate analysis of prefectural designated cancer care hospitals which satisfy the institute's qualifications for advanced technologies revealed the number of radiation oncologists (P=0.01) and that of radiation therapists (P=0.003) were significantly correlated with the implementation of intensity-modulated radiotherapy for prostate cancer, and the number of radiation oncologists (P=0.02) was correlated with the implementation of stereotactic body radiotherapy. There was a trend to correlate the number of medical physicists with the implementation of stereotactic body radiotherapy (P=0.07). Only 175 (51%) regional designated cancer care hospitals satisfy the institute's qualification of stereotactic body radiotherapy and 76 (22%) satisfy that of intensity-modulated radiotherapy. Seventeen percent prefectural designated cancer care hospitals and 13% regional designated cancer care hospitals

  16. Human factors survey of advanced instrumentation and controls technologies in nuclear plants

    International Nuclear Information System (INIS)

    Carter, R.J.

    1992-01-01

    A survey of advanced instrumentation and controls (I ampersand C) technologies and associated human factors issues in the US and Canadian nuclear industries was carried out by a team from Oak Ridge national laboratory to provide background for the development of regulatory policy, criteria, and guides for review of advanced I ampersand C systems as well as human engineering guidelines for evaluating these systems. The survey found those components of the US nuclear industry surveyed to be quite interested in advanced I ampersand C, but very cautious in implementing such systems in nuclear facilities and power plants. The trend in the facilities surveyed is to experiment cautiously when there is an intuitive advantage or short-term payoff. In the control room, the usual practice is direct substitution of digital and microprocessor-based instruments or systems that are functionally identical to the analog instruments or systems being replaced. The most advanced I ampersand C systems were found in the Canadian CANDU plants, where the newest plant has digital system in almost 100% of its control systems and in over 70% of its plant protection system. The hypothesis that properly 'introducing digital systems increases safety' is supported by the Canadian experience. The performance of these digital systems was achieved using an appropriate quality assurance program for the software development. The ability of digital systems to detect impending failures and initiate a fail-safe action, is a significant safety issue that should be of special interest to every US utility as well as to the US Nuclear Regulatory Commission. (orig.)

  17. A survey of information technology management at U.S. dental schools.

    Science.gov (United States)

    Wrzosek, Mariusz; Warner, Gary; Donoff, R Bruce; Howell, Thomas H; Karimbux, Nadeem

    2003-10-01

    The purpose of this project is to assess how information technology (IT) is being implemented and managed in U.S. dental schools. Recent advances in IT have restructured many of the administrative, curricular, and clinical functions in dental schools. Purchasing hardware and software and hiring personnel to maintain IT present significant financial and administrative commitments for these schools. A nine-question survey was sent to all U.S. dental schools via email with a follow-up postal mailing. Forty-six surveys were returned (83.6 percent response rate). The analysis indicates that dental schools are managing IT in vastly different ways. For example, 71 percent of the schools report a centralized structure, and 61 percent have a line item in the budget to manage IT. On average there are 4.4 full-time equivalents hired to manage IT, with the majority of these people being trained in IT (eight schools reported dually trained IT/dental personnel). The majority of schools report using software to manage their admissions process (70 percent), curriculum analysis (72 percent), and delivery of curriculum content (72 percent), as well as to manage their student clinics (91 percent, business aspect; 87 percent, patients; 65 percent, grading on clinic floor; 76 percent, managing clinical evaluations) and faculty practices (85 percent, business aspect; 65 percent, patients). The use of multimedia (50 percent) and simulation (52 percent) in the preclinical area is mixed. The purchase of laptops (24 percent) and PCs (11 percent) is required in almost a third of all schools participating in this survey. Dental schools in the United States are managing IT in a variety of different ways, using various internally and commercially available tools. The cost to institutions can be large and is usually handled in centralized structures in the school with fixed budgets. The results of this survey can be used to assist schools in the planning and implementation of IT at their

  18. Are health centers in Thailand ready for health information technology? : a national survey.

    Science.gov (United States)

    Kijsanayotin, Boonchai; Speedie, Stuart

    2006-01-01

    The Thailand universal health care coverage scheme was instituted in 2001 and The Thailand Ministry of Public Health (MOPH) is restructuring its information systems to support this reform. The MOPH anticipates developing computerized health information systems which can provide information for administration tasks and can improve both healthcare delivery and public health services. To achieve these target goals, knowledge about users and organizations is vital. The knowledge of how health center workers currently use information technology (IT), their knowledge of IT, and acceptance of IT are not only beneficial to policy makers but also to system designers and implementers. The primary objective of this study is to learn how health centers in Thailand use IT, the level of basic IT knowledge among their workers, and their acceptance of health IT. We surveyed a random cross sectional sample of 1,607 health centers representing the total of 9,806 in Thailand in 2005. With an 82% response rate, the preliminary results indicate that information technology usage is pervasive in health centers. The respondents showed a moderately high degree of health information technology acceptance with a modest level of basic IT knowledge. There were no differences in degrees of acceptance among the four geographic regions. The mean score of "intention to use IT" was 5.6 on a scale of 7 and the average basic IT knowledge score was 13 out of 20. These results suggests the possibility of project success if the national health center information system projects are developed and implemented.

  19. Fiscal 1997 survey report. Survey on the innovative well drilling technology; 1997 nendo chosa hokokusho. Kakushinteki kosei kussaku gijutsu ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    In the geothermal drilling, reduction of the cost of well drilling is an important subject for technical development. The geothermal resource development tends to be made at higher temperatures and at deeper wells. In the present drilling technology, the cost is rising with the exponentially increasing depth and temperature, and there is also occurring the technical limit. Accordingly, the survey clarified the limit of the present drilling technology/cost to point out the research trend of the drilling technology as substitute for the present one, possibilities of the introduction, and the R and D target and subjects. As to latest drilling systems abroad and in Japan, the following were surveyed to study and extract promising technologies and systems: improvement/application of drilling equipment/materials (enhancement of heat resistance of the main drilling equipment, etc., cooling effects of top drive, heat resistance verification of MWD tools, PDM, tricone bits, multi-stage cementing tools, etc.), heightening of drilling rates, trend surveys of slim hole drilling, control drilling, well maintenance/workover, and well design technology. 68 refs., 73 figs., 40 tabs.

  20. Modal survey testing of the Lidar In-space Technology Experiment (LITE) - A Space Shuttle payload

    Science.gov (United States)

    Anderson, J. B.; Coleman, A. D.; Driskill, T. C.; Lindell, M. C.

    This paper presents the results of the modal survey test of the Lidar In-space Technology Experiment (LITE), a Space Shuttle payload mounted in a Spacelab flight single pallet. The test was performed by the Dynamics Test Branch at Marshall Space Flight Center, AL and run in two phases. In the first phase, an unloaded orthogrid connected to the pallet with 52 tension struts was tested. This test included 73 measurement points in three directions. In the second phase, the pallet was integrated with mass simulators mounted on the flight support structure to represent the dynamics (weight and center of gravity) of the various components comprising the LITE experiment and instrumented at 213 points in 3 directions. The test article was suspended by an air bag system to simulate a free-free boundary condition. This paper presents the results obtained from the testing and analytical model correlation efforts. The effect of the suspension system on the test article is also discussed.

  1. Users' attitude towards science and technology database system : INIS user needs survey

    International Nuclear Information System (INIS)

    Fukazawa, Takeyasu; Takahashi, Satoko; Yonezawa, Minoru; Kajiro, Tadashi; Mineo, Yukinobu; Habara, Takako; Komatsubara, Yasutoshi; Hiramatsu, Nobuaki; Habara, Tadashi.

    1995-01-01

    The International Nuclear Information System (INIS) is the world's leading information system on the peaceful use of nuclear energy which is being operated by the International Atomic Energy Agency (IAEA) in collaboration with its member-states and other international organizations. After more than 20 years of the operation of INIS, a user needs survey was conducted with the aim of assisting the INIS Secretariat to decide which way INIS should go. This report describes users' attitude towards that system on the basis of the conclusions drawn from the questionnaires sent out to the users by the Japan Atomic Energy Research Institute, the INIS national center in Japan, in close collaboration with the Japan Information Center of Science and Technology. (author)

  2. Survey on Wireless Sensor Network Technologies for Industrial Automation: The Security and Quality of Service Perspectives

    Directory of Open Access Journals (Sweden)

    Delphine Christin

    2010-04-01

    Full Text Available Wireless Sensor Networks (WSNs are gradually adopted in the industrial world due to their advantages over wired networks. In addition to saving cabling costs, WSNs widen the realm of environments feasible for monitoring. They thus add sensing and acting capabilities to objects in the physical world and allow for communication among these objects or with services in the future Internet. However, the acceptance of WSNs by the industrial automation community is impeded by open issues, such as security guarantees and provision of Quality of Service (QoS. To examine both of these perspectives, we select and survey relevant WSN technologies dedicated to industrial automation. We determine QoS requirements and carry out a threat analysis, which act as basis of our evaluation of the current state-of-the-art. According to the results of this evaluation, we identify and discuss open research issues.

  3. Internet and mobile technology use among urban African American parents: survey study of a clinical population.

    Science.gov (United States)

    Mitchell, Stephanie J; Godoy, Leandra; Shabazz, Kanya; Horn, Ivor B

    2014-01-13

    There is considerable potential for mobile technologies to empower pediatric patients and families by improving their communication with health professionals. National surveys suggest minority parents frequently communicate via mobile technology, but it is uncertain how amenable they are to receiving health care information in this format. Although the low cost and far reach characteristics of mobile health (mHealth) technology makes it advantageous for communication with minority parents, data on acceptance are needed. The objective of the study was to determine utilization of mobile and Internet technology by African American parents in an urban, underserved population, and to assess their interest in receiving health information via text messaging or other technologies (eg, social media and the Internet). A survey was administered to parents of children aged 1-12 years covered by public insurance receiving care at 3 pediatric primary care centers in Washington, DC. The African American sample (N=302) was composed of primarily single (75.8%, 229/302) mothers. Almost half had more than a high school education (47.7%, 144/302) and incomes above US $25,000 per year (43.0%, 130/302). Most (97.0%, 293/302) reported owning a cell phone, of which 91.1% (275/302) used it to text and 78.5% (237/302) used it to access the Internet. Most had service plans with unlimited text and data, but 26.5% (80/302) experienced service interruptions in the previous year. Home Internet access was more prevalent among those with higher income (86.2%, 112/130), but it was still relatively pervasive among lower income families (66.9%, 83/124). In adjusted logistic regression models, African American mothers with income greater than US $25,000 annually were 4 times as likely to own a tablet computer than their lower income counterparts. Of the participants, 80.8% (244/302) used social networking, primarily Facebook, and 74.2% (224/302) were interested in joining a social networking group

  4. A survey on the technologies and cases for the cognitive models of nuclear power plant operators

    International Nuclear Information System (INIS)

    Lee, Yong Hee; Chun, Se Woo; Seo, Sang Moon; Lee, Hyun Chul

    1993-04-01

    To enhance the safety and availability of nuclear power plants, it is necessary to develop the methodologies which can systematically analyze the interrelationships between plant operators and main process systems. Operator congnitive models enable to provide an explicit method to analyze how operator's congitive behavior reacts to the behavior of system changes. However, because no adequate model has been developed up to now, it is difficult to take an effective approach for the review, assessment and improvement of human factors. In this study, we have surveyed the techniques and the cases of operator model development, aiming to develop an operator's model as one of human engineering application methodologies. We have analyzed the cognitive characteristics of decision-making, which is one of the principal factors for modeling, and reviewed the methodologies and implementation thechniques used in the cases of the model development. We investigated the tendencies of the model developments by reviewing ten cases and especially CES, INTEROPS and COSIMO models which have been developed or are under development in nuclear fields. Also, we summarized the cognitive characteristics to be considered in the modeling for the purpose of modeling operator's decision-making. For modeling methodologies, we found a trend of the modeling that is software simulations based on the artificial intelligence technologies, especially focused in knowledge representation methods. Based on the results of our survey, we proposed a development approach and several urgent research subjects. We suggested the development simulation tools which can be applicable to the review, assessment and improvement of human factors, by implementing them as softwares using expert system development tools. The results of this study have been applied to our long-term project named 'The Development of Human Engineering Technologies.' (Author)

  5. Survey of information technology in Intensive Care Units in Ontario, Canada

    Directory of Open Access Journals (Sweden)

    Hallett David

    2008-01-01

    Full Text Available Abstract Background The Intensive Care Unit (ICU is a data-rich environment where information technology (IT may enhance patient care. We surveyed ICUs in the province of Ontario, Canada, to determine the availability, implementation and variability of information systems. Methods A self-administered internet-based survey was completed by ICU directors between May and October 2006. We measured the spectrum of ICU clinical data accessible electronically, the availability of decision support tools, the availability of electronic imaging systems for radiology, the use of electronic order entry and medication administration systems, and the availability of hardware and wireless or mobile systems. We used Fisher's Exact tests to compare IT availability and Classification and Regression Trees (CART to estimate the optimal cut-point for the number of computers per ICU bed. Results We obtained responses from 50 hospitals (68.5% of institutions with level 3 ICUs, of which 21 (42% were university-affiliated. The majority electronically accessed laboratory data and imaging reports (92% and used picture archiving and communication systems (PACS (76%. Other computing functions were less prevalent (medication administration records 46%, physician or nursing notes 26%; medication order entry 22%. No association was noted between IT availability and ICU size or university affiliation. Sites used clinical information systems from15 different vendors and 8 different PACS systems were in use. Half of the respondents described the number of computers available as insufficient. Wireless networks and mobile computing systems were used in 23 ICUs (46%. Conclusion Ontario ICUs demontrate a high prevalence of the use of basic information technology systems. However, implementation of the more complex and potentially more beneficial applications is low. The wide variation in vendors utilized may impair information exchange, interoperability and uniform data collection.

  6. A multispectral scanner survey of the Rocky Flats Environmental Technology Site and surrounding area, Golden, Colorado

    International Nuclear Information System (INIS)

    Brewster, S.B. Jr.; Brickey, D.W.; Ross, S.L.; Shines, J.E.

    1997-04-01

    Aerial multispectral scanner imagery was collected of the Rocky Flats Environmental Technology Site in Golden, Colorado, on June 3, 5, 6, and 7, 1994, using a Daedalus AADS1268 multispectral scanner and coincident aerial color and color infrared photography. Flight altitudes were 4,500 feet (1372 meters) above ground level to match prior 1989 survey data; 2,000 feet (609 meters) above ground level for sitewide vegetation mapping; and 1,000 feet (304 meters) above ground level for selected areas of special interest. A multispectral survey was initiated to improve the existing vegetation classification map, to identify seeps and springs, and to generate ARC/INFO Geographic Information System compatible coverages of the vegetation and wetlands for the entire site including the buffer zone. The multispectral scanner imagery and coincident aerial photography were analyzed for the detection, identification, and mapping of vegetation and wetlands. The multispectral scanner data were processed digitally while the color and color infrared photography were manually photo-interpreted to define vegetation and wetlands. Several standard image enhancement techniques were applied to the multispectral scanner data to assist image interpretation. A seep enhancement was applied and a color composite consisting of multispectral scanner channels 11, 7, and 5 (thermal infrared, mid-infrared, and red bands, respectively) proved most useful for detecting seeps, seep zones, and springs. The predawn thermal infrared data were also useful in identifying and locating seeps. The remote sensing data, mapped wetlands, and ancillary Geographic Information System compatible data sets were spatially analyzed for seeps

  7. Utilization of information technology in medical education: a questionnaire survey of students in a Malaysian institution.

    Science.gov (United States)

    Nurjahan, M I; Lim, T A; Yeong, S W; Foong, A L S; Ware, J

    2002-12-01

    The objective of this survey was to obtain a self-reported assessment of the use of Information and Communication Technology (ICT) by medical students at the International Medical University, Malaysia. Students' perceived skills and extent of usage of ICT were evaluated using a questionnaire. Chi-square analysis were performed to ascertain the association between variables. Further statistical testing using Chi-square test for trend was done when one of the variables was ordered, and Spearman rank correlation when both variables were ordered. Overall, (98%) of students responded to the questionnaire. Twenty seven students (5.7%) did not use a computer either in the university or at home. Most students surveyed reported adequate skills at word processing (55%), e-mailing (78%) and surfing the internet (67%). The results suggests that in order to increase the level of computer literacy among medical students, positive steps would need to be taken, for example the formal inclusion of ICT instruction in the teaching of undergraduate medicine. This will enhance medical students' ability to acquire, appraise, and use information in order to solve clinical and other problems quickly and efficiently in the course of their studies, and more importantly when they graduate.

  8. Feasibility survey on international cooperation for high efficiency energy conversion technology in fiscal 1993

    Science.gov (United States)

    1994-03-01

    Following cooperative researches on fuel cell jointly conducted by NEDO and EGAT (Electricity Generating Authority of Thailand), the survey on international cooperation relating to high efficiency energy conversion technology was carried out for the ASEAN countries. The paper summed up the results of the survey. The study of the international cooperation is made for the following three items: a program for periodical exchange of information with EGAT, a project for cooperative research on phosphoric acid fuel cell in Indonesia, and a project for cooperative research with EGAT on electric power storage by advanced battery. In Malaysia, which is small in scale of state, part of the Ministry of Energy, Telecommunication and Posts is only in charge of the energy issue. Therefore, the situation is that they cannot answer well to many items of research/development cooperation brought in from Japan. The item of medium- and long-term developmental research in the Philippines is about the problems which are seen subsequently in the Manila metropolitan area where the problem of outage is being settled. Accordingly, it is essential to promote the cooperative research, well confirming policies and systems of the Ministry of Energy and the national electricity corporation.

  9. People attending pulmonary rehabilitation demonstrate a substantial engagement with technology and willingness to use telerehabilitation: a survey

    Directory of Open Access Journals (Sweden)

    Zachariah Seidman

    2017-07-01

    Conclusion: People attending metropolitan pulmonary rehabilitation, maintenance exercise classes and support groups had substantial technology engagement, with high device access and use, and good self-rated technology competence. The majority of participants were willing to use telerehabilitation, especially if they were regular users of technology devices. [Seidman Z, McNamara R, Wootton S, Leung R, Spencer L, Dale M, Dennis S, McKeough Z (2017 People attending pulmonary rehabilitation demonstrate a substantial engagement with technology and willingness to use telerehabilitation: a survey. Journal of Physiotherapy 63: 175–181

  10. Employee problems and their consequences in the technology industry: evidence from surveys and counseling records.

    Science.gov (United States)

    Wang, Ching-Wen; Lin, Po-Chang; Sha, Chyuan

    2014-06-01

    To support employees' work and health, organizations should help employees cope with common problems. Previous studies have focused primarily on work-related problems across multiple industries rather than on evaluating industry-specific issues. Here, two approaches identified common work and non-work employee problems in the technology industry with the strongest correlations with psychosomatic health and life satisfaction. Study 1 used questionnaires to identify the problems that were perceived as the most frequent by lower-level employees (N = 355) working in the technology industry. Study 2 evaluated employees' coping behaviors by analyzing (with permission) counseling records collected from an employee assistance service company (N = 276). Employees reported a variety of problems; work problems were the only problems (of the top 5 problems) reported in both studies. Several problems emerged in the counseling records (e.g., legal issues, career development, family and marriage problems, and emotional problems) but not in the surveys. Future research should apply these observations to develop scales for measuring employee stressors.

  11. Students views of integrating web-based learning technology into the nursing curriculum - A descriptive survey.

    Science.gov (United States)

    Adams, Audrey; Timmins, Fiona

    2006-01-01

    This paper describes students' experiences of a Web-based innovation at one university. This paper reports on the first phase of this development where two Web-based modules were developed. Using a survey approach (n=44) students' access to and use of computer technology were explored. Findings revealed that students' prior use of computers and Internet technologies was higher than previously reported, although use of databases was low. Skills in this area increased during the programme, with a significant rise in database, email, search engine and word processing use. Many specific computer skills were learned during the programme, with high numbers reporting ability to deal adequately with files and folders. Overall, the experience was a positive one for students. While a sense of student isolation was not reported, as many students kept in touch by phone and class attendance continued, some individual students did appear to isolate themselves. This teaching methodology has much to offer in the provision of convenient easy to access programmes that can be easily adapted to the individual lifestyle. However, student support mechanisms need careful consideration for students who are at risk of becoming isolated. Staff also need to supported in the provision of this methodology and face-to-face contact with teachers for some part of the programme is preferable.

  12. Strategic uses of information technology in health care: a state-of-the-art survey.

    Science.gov (United States)

    Raghupathi, W; Tan, J

    1999-08-01

    The general perception that the use of information technology (IT) in health care is ten to fifteen years behind IT in other industrial sectors such as banking, manufacturing, and airline is rapidly changing. Health care providers, faced with an unprecedented era of competition and managed care, are now exploring the opportunities for using IT to improve the quality while simultaneously reducing the cost of health care. A revolution is taking place in the health care industry, with IT playing an increasingly important role in its delivery. In recent years, for example, the industry spent approximately $12 billion to $14 billion a year on IT. Further exponential growth is expected as the health care industry implements electronic medical records, upgrades hospital information systems, sets up intranets for sharing information among key stakeholders, and uses public networks, such as the Internet, for distributing health-related information and for providing remote diagnostics. Along with these drastic changes and the new approach to health care, the field of health/medical informatics and telematics has also experienced significant growth in the last few years. This article identifies and surveys the critical information technologies that are being adopted to provide strategic benefits to the various health care constituencies including hospitals and health maintenance organizations (HMOs).

  13. DEVELOPMENT AND APPLICATION OF THE KEY TECHNOLOGIES FOR THE QUALITY CONTROL AND INSPECTION OF NATIONAL GEOGRAPHICAL CONDITIONS SURVEY PRODUCTS

    Directory of Open Access Journals (Sweden)

    Y. Zhao

    2018-04-01

    Full Text Available The First National Geographical Condition Survey is a predecessor task to dynamically master basic situations of the nature, ecology and human activities on the earth’s surface and it is the brand-new mapping geographic information engineering. In order to ensure comprehensive, real and accurate survey results and achieve the quality management target which the qualified rate is 100 % and the yield is more than 80 %, it is necessary to carry out the quality control and result inspection for national geographical conditions survey on a national scale. To ensure that achievement quality meets quality target requirements, this paper develops the key technology method of “five-in-one” quality control that is constituted by “quality control system of national geographical condition survey, quality inspection technology system, quality evaluation system, quality inspection information management system and national linked quality control institutions” by aiming at large scale, wide coverage range, more undertaking units, more management levels, technical updating, more production process and obvious regional differences in the national geographical condition survey and combining with novel achievement manifestation, complicated dependency, more special reference data, and large data size. This project fully considering the domestic and foreign related research results and production practice experience, combined with the technology development and the needs of the production, it stipulates the inspection methods and technical requirements of each stage in the quality inspection of the geographical condition survey results, and extends the traditional inspection and acceptance technology, and solves the key technologies that are badly needed in the first national geographic survey.

  14. A survey of stakeholder perspectives on a proposed combined exoskeleton-wheelchair technology.

    Science.gov (United States)

    Bhatnagar, Tim; Ben Mortensen, W; Mattie, Johanne; Wolff, Jamie; Parker, Claire; Borisoff, Jaimie

    2017-07-01

    Exoskeleton technology has potential benefits for wheelchair users' health and mobility. However, there are practical barriers to their everyday use as a mobility device. In particular, challenges related to travelling longer distances and transitioning between using a wheelchair and exoskeleton walking may present significant deterrents to regular exoskeleton use. In an effort to remove these barriers, a combined exoskeleton-wheelchair concept ('COMBO') has been proposed, which aims to achieve the benefits of both these mobility technologies. Given the inherent importance of including user-stakeholder opinions when designing an assistive technology solution, a study was undertaken to explore the perspectives of wheelchair users and healthcare professionals on the proposed conceptual design of the COMBO. An online survey with quantitative and qualitative components was conducted with wheelchair users and healthcare professionals working directly with individuals with mobility impairments. Respondents rated whether they would use or recommend a COMBO for four potential reasons. Nine design features were rated and compared in terms of their importance. Content analysis was used to analyze data from an open-ended question regarding additional perceptions about using or recommending a COMBO. A total of 481 survey responses were analyzed, 354 from wheelchair users and 127 from healthcare professionals. Potential health benefits was the most highly rated reason for potential use or recommendation of a COMBO. Of the 9 design features, 2 had a median rating of very important: inclusion of a fall-protection mechanism, and the ability for the operator to use their hands while standing. Qualitative findings indicated that health and physical benefits, use for daily life activities, and psychosocial benefits were important considerations in whether to use or recommend the COMBO. This study captures the opinions and perspectives of two stakeholder groups for an exoskeleton

  15. 2012 national survey on bicyclist and pedestrian attitudes and behavior : traffic tech : technology transfer series

    Science.gov (United States)

    2013-09-01

    In 2012, NHTSA conducted a national telephone survey to obtain a status report on attitudes, knowledge, and behavior related to outdoor walking and bicycling. This study updates national telephone survey data collected by NHTSA in 2002. The survey ad...

  16. A Survey of Communications and Networking Technologies for Energy Management in Buildings and Home Automation

    Directory of Open Access Journals (Sweden)

    Aravind Kailas

    2012-01-01

    Full Text Available With the exploding power consumption in private households and increasing environmental and regulatory restraints, the need to improve the overall efficiency of electrical networks has never been greater. That being said, the most efficient way to minimize the power consumption is by voluntary mitigation of home electric energy consumption, based on energy-awareness and automatic or manual reduction of standby power of idling home appliances. Deploying bi-directional smart meters and home energy management (HEM agents that provision real-time usage monitoring and remote control, will enable HEM in “smart households.” Furthermore, the traditionally inelastic demand curve has began to change, and these emerging HEM technologies enable consumers (industrial to residential to respond to the energy market behavior to reduce their consumption at peak prices, to supply reserves on a as-needed basis, and to reduce demand on the electric grid. Because the development of smart grid-related activities has resulted in an increased interest in demand response (DR and demand side management (DSM programs, this paper presents some popular DR and DSM initiatives that include planning, implementation and evaluation techniques for reducing energy consumption and peak electricity demand. The paper then focuses on reviewing and distinguishing the various state-of-the-art HEM control and networking technologies, and outlines directions for promoting the shift towards a society with low energy demand and low greenhouse gas emissions. The paper also surveys the existing software and hardware tools, platforms, and test beds for evaluating the performance of the information and communications technologies that are at the core of future smart grids. It is envisioned that this paper will inspire future research and design efforts in developing standardized and user-friendly smart energy monitoring systems that are suitable for wide scale deployment in homes.

  17. Fiscal 1994 survey report. Coal hydrogasification technology development; 1994 nendo sekitan suiten gaska gijutsu kaihatsu chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    Surveys and studies were conducted to establish a practical SNG (substitute natural gas) production process. For the development of an ARCH (advanced rapid coal hydrogasification) process, a plan was prepared covering the basic concept of the process, overall development program, hydrogen/oxygen burner, and an injector. The overall development program comprises element studies (4 years) and the study of the operation of a 50 tons/day pilot plant (8 years), and deals with the development of a reactor and peripheral equipment. Next comes a total system verification effort using a 200 tons/day verification plant in combination with a hydrogen production process, and this aims to achieve commercialization at 3 million Nm{sup 3}/day. As for the hydrogen/oxygen burner, a structure was proposed after surveys of literature and patents on burner structures, ignition methods, and monitoring methods. In the development of an injector, a plan was prepared for testing, and improving, the performance in a cold/hot model of a specimen incorporating the proposed hydrogen/oxygen burner. Basic studies to be carried out include simulation-aided performance prediction. (NEDO)

  18. FY 2000 report on the survey on the long-term energy technology strategy. Fundamental survey to work out industrial technology strategies (technology strategy by field - material technology field); 2000 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (bun'yabetsu gijutsu senryaku (zairyo gijutsu bun'ya))

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    For the purpose of constructing the material technology strategy, conducted were study of the trend of technical development, arrangement of material technology seeds, and survey of the R and D environment. Concretely, the paper carried out the grasp of the national projects related to materials in Europe and the U.S., patent registration (U.S.-Japan comparison)/application (Europe/Japan), transfer of technology trade, and survey of the trend of papers made public in scientific magazines. Further, in the survey of the R and D environment, conducted were how to treat researchers/engineers, how to handle intellectual ownership, system to promote the cooperation among industry/university/government, and comparison among countries in policies of technology such as patent strategy. The results of the survey were classified into the following 4 items: 1) trend of the technical development in the material technology field; 2) developmental environment in the material technology field; 3) competitive force in the material field and material user needs/seeds maps; 4) proposal for the material technology strategy. As to the competitive force of material technology in 3), the paper took up organic/polymer, iron/steel, aluminum, semiconductor, and ceramic materials. (NEDO)

  19. Sleep technologists educational needs assessment: a survey of polysomnography, electroneurodiagnostic technology, and respiratory therapy education program directors.

    Science.gov (United States)

    Wells, Mary Ellen; Vaughn, Bradley V

    2013-10-15

    In this study, we assessed the community and educational needs for sleep technologists by surveying program directors of nationally accredited polysomnography, electroneurodiagnostic technology, and respiratory care educational programs. Currently, little is known about our educational capacity and the need for advanced degrees for sleep medicine technical support. A questionnaire was developed about current and future community and educational needs for sleep technologists. The questionnaire was sent to directors of CAAHEP-accredited polysomnography and electroneurodiagnostic technology programs (associate degree and certificate programs), and directors of CoARC-accredited respiratory therapy associate degree and bachelor degree programs (n = 358). Qualitative and quantitative data were collected via an internet survey tool. Data analysis was conducted with the IBM SPSS statistical package and included calculating means and standard deviations of the frequency of responses. Qualitative data was analyzed and classified based on emerging themes. One hundred seven of 408 program directors completed the survey. Seventy-four percent agreed that demand for qualified sleep technologists will increase, yet 50% of those surveyed believe there are not enough educational programs to meet the demand. Seventy-eight percent of those surveyed agreed that the educational requirements for sleep technologists will soon increase; 79% of those surveyed believe sleep centers have a need for technologists with advanced training or specialization. Our study shows educators of associate and certificate degree programs believe there is a need for a bachelor's degree in sleep science and technology.

  20. Use of medical technologies in rehabilitation medicine settings in Israel: results of the TECHNO-R 2005 survey.

    Science.gov (United States)

    Ring, Haim; Keren, Ofer; Zwecker, Manuel; Dynia, Aida

    2007-10-01

    With the development of computer technology and the high-tech electronic industry over the past 30 years, the technological age is flourishing. New technologies are continually being introduced, and questions regarding the economic viability of these technologies need to be addressed. To identify the medical technologies currently in use in different rehabilitation medicine settings in Israel. The TECHNO-R 2005 survey was conducted in two phases. Beginning in 2004, the first survey used a questionnaire with open questions relating to the different technologies in clinical use, including questions on their purpose, who operates the device (technician, physiotherapist, occupational therapist, physician, etc.), and a description of the treated patients. This questionnaire was sent to 31 rehabilitation medicine facilities in Israel. Due to difficulties in comprehension of the term "technology," a second revised standardized questionnaire with closed-ended questions specifying diverse technologies was introduced in 2005. The responder had to mark from a list of 15 different medical technologies which were in use in his or her facility, as well as their purpose, who operates the device, and a description of the treated patients. Transcutaneous electrical nerve stimulation, the TILT bed, continuous passive movement, and therapeutic ultrasound were the most widely used technologies in rehabilitation medicine facilities. Monitoring of the sitting position in the wheelchair, at the bottom of the list, was found to be the least used technology (with 15.4% occurrence). Most of the technologies are used primarily for treatment purposes and to a lesser degree for diagnosis and research. Our study poses a fundamental semantic and conceptual question regarding what kind of technologies are or should be part of the standard equipment of any accredited rehabilitation medicine facility for assessment, treatment and/or research. For this purpose, additional data are needed.

  1. Report on the survey in fiscal 1998. Survey on an environment technology transfer information network; 1998 nendo hokokusho. Kankyo gijutsu iten joho network chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This paper describes a survey on an environment technology transfer information network. Based on the achievements obtained by the surveys in fiscal 1995 and 1996, the ICETT has participated as one organization constituting the APEC environment technology exchange virtual center, and begun providing information since April 1997. As the environment technology information, those items actually employed by factories and operation sites in Japan are put into a data base, and into a home page including training information centering around those contained in the data base, and examples of works done by local governments for prevention of pollution. Furthermore in fiscal 1997, a simulation software for a model process has been developed. Fiscal 1998 strengthened the data base for environment preservation technology information, investigated environment preserving model companies and summarized them including even their management aspect. Investigations were carried out in developing countries on application of cleaner technologies. Gaps far exceeding anticipation exist in every field between these developing countries and Japan. Environment protection measures applied and succeeded in the developing countries as the means to narrow the gaps were collected, and compiled as the specific examples. (NEDO)

  2. The role of hospital payments in the adoption of new medical technologies: an international survey of current practice.

    Science.gov (United States)

    Sorenson, Corinna; Drummond, Michael; Torbica, Aleksandra; Callea, Giuditta; Mateus, Ceu

    2015-04-01

    This study examined the role of prospective payment systems in the adoption of new medical technologies across different countries. A literature review was conducted to provide background for the study and guide development of a survey instrument. The survey was disseminated to hospital payment systems experts in 15 jurisdictions. Fifty-one surveys were disseminated, with 34 returned. The surveys returned covered 14 of the 15 jurisdictions invited to participate. The majority (71%) of countries update the patient classification system and/or payment tariffs on an annual basis to try to account for new technologies. Use of short-term separate or supplementary payments for new technologies occurs in 79% of countries to ensure adequate funding and facilitate adoption. A minority (43%) of countries use evidence of therapeutic benefit and/or costs to determine or update payment tariffs, although it is somewhat more common in establishing short-term payments. The main barrier to using evidence is uncertain or unavailable clinical evidence. Almost three-fourths of respondents believed diagnosis-related group systems incentivize or deter technology adoption, depending on the particular circumstances. Improvements are needed, such as enhanced strategies for evidence generation and linking evidence of value to payments, national and international collaboration and training to improve existing practice, and flexible timelines for short-term payments. Importantly, additional research is needed to understand how different payment policies impact technology uptake as well as quality of care and costs.

  3. Traditional methods v. new technologies – dilemmas for dietary assessment in large-scale nutrition surveys and studies

    DEFF Research Database (Denmark)

    Amoutzopoulos, B.; Steer, T.; Roberts, C.

    2018-01-01

    assessment in population surveys’, was held at the 9th International Conference on Diet and Activity Methods (ICDAM9), Brisbane, September 2015. Despite respondent and researcher burden, traditional methods have been most commonly used in nutrition surveys. However, dietary assessment technologies offer...... of traditional dietary assessment methods (food records, FFQ, 24 h recalls, diet history with interviewer-assisted data collection) v. new technology-based dietary assessment methods (web-based and mobile device applications). The panel discussion ‘Traditional methods v. new technologies: dilemmas for dietary......The aim of the present paper is to summarise current and future applications of dietary assessment technologies in nutrition surveys in developed countries. It includes the discussion of key points and highlights of subsequent developments from a panel discussion to address strengths and weaknesses...

  4. Equipment Design and Cost Estimation for Small Modular Biomass Systems, Synthesis Gas Cleanup, and Oxygen Separation Equipment; Task 9: Mixed Alcohols From Syngas -- State of Technology

    Energy Technology Data Exchange (ETDEWEB)

    Nexant Inc.

    2006-05-01

    This deliverable is for Task 9, Mixed Alcohols from Syngas: State of Technology, as part of National Renewable Energy Laboratory (NREL) Award ACO-5-44027, ''Equipment Design and Cost Estimation for Small Modular Biomass Systems, Synthesis Gas Cleanup and Oxygen Separation Equipment''. Task 9 supplements the work previously done by NREL in the mixed alcohols section of the 2003 technical report Preliminary Screening--Technical and Economic Assessment of Synthesis Gas to Fuels and Chemicals with Emphasis on the Potential for Biomass-Derived Syngas.

  5. Human Factors Process Task Analysis: Liquid Oxygen Pump Acceptance Test Procedure at the Advanced Technology Development Center

    Science.gov (United States)

    Diorio, Kimberly A.; Voska, Ned (Technical Monitor)

    2002-01-01

    This viewgraph presentation provides information on Human Factors Process Failure Modes and Effects Analysis (HF PFMEA). HF PFMEA includes the following 10 steps: Describe mission; Define System; Identify human-machine; List human actions; Identify potential errors; Identify factors that effect error; Determine likelihood of error; Determine potential effects of errors; Evaluate risk; Generate solutions (manage error). The presentation also describes how this analysis was applied to a liquid oxygen pump acceptance test.

  6. A Survey of LIDAR Technology and Its Use in Spacecraft Relative Navigation

    Science.gov (United States)

    Christian, John A.; Cryan, Scott P.

    2013-01-01

    This paper provides a survey of modern LIght Detection And Ranging (LIDAR) sensors from a perspective of how they can be used for spacecraft relative navigation. In addition to LIDAR technology commonly used in space applications today (e.g. scanning, flash), this paper reviews emerging LIDAR technologies gaining traction in other non-aerospace fields. The discussion will include an overview of sensor operating principles and specific pros/cons for each type of LIDAR. This paper provides a comprehensive review of LIDAR technology as applied specifically to spacecraft relative navigation. HE problem of orbital rendezvous and docking has been a consistent challenge for complex space missions since before the Gemini 8 spacecraft performed the first successful on-orbit docking of two spacecraft in 1966. Over the years, a great deal of effort has been devoted to advancing technology associated with all aspects of the rendezvous, proximity operations, and docking (RPOD) flight phase. After years of perfecting the art of crewed rendezvous with the Gemini, Apollo, and Space Shuttle programs, NASA began investigating the problem of autonomous rendezvous and docking (AR&D) to support a host of different mission applications. Some of these applications include autonomous resupply of the International Space Station (ISS), robotic servicing/refueling of existing orbital assets, and on-orbit assembly.1 The push towards a robust AR&D capability has led to an intensified interest in a number of different sensors capable of providing insight into the relative state of two spacecraft. The present work focuses on exploring the state-of-the-art in one of these sensors - LIght Detection And Ranging (LIDAR) sensors. It should be noted that the military community frequently uses the acronym LADAR (LAser Detection And Ranging) to refer to what this paper calls LIDARs. A LIDAR is an active remote sensing device that is typically used in space applications to obtain the range to one or more

  7. Fiscal 1999 survey report on survey of long-term strategy on energy technology. Long-term energy technological strategy survey (Long-term energy technological strategy survey); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Choki energy gijutsu senryaku chosa (choki energy gijutsu senryaku chosa))

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    To enhance still more effectively the research and development of energy-related/environmental technologies, research and development strategies have to be worked out from a long-term view point and policy resources such as investment in research and development should be optimally distributed after clarifying and defining the course to follow toward the achievement of research and development goals. This project aims to conduct studies, and to show the course to follow in the future, towards the establishment of a long-term energy technological strategy by investigating energy systems for around 2050, interim energy systems at the intermediate stage, and innovative energy technologies for realizing such energy systems. In Chapter 1, the position of the survey and its purpose and prerequisites are shown. In Chapter 2, the history of social and economic conditions surrounding energy/environmental technologies and of energy situation up to the present time is compiled, and the outlook is analyzed and predicted. In Chapter 3, formulation of a long-term energy technological strategy is discussed. In Chapter 5, how to embody such a strategy is shown. (NEDO)

  8. Fiscal 1992 report. Overseas surveys out of surveys for coal hydrogasification technology development; 1992 nendo sekitan suiten gaska gijutsu kaihatsu chosa ni okeru kaigai chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1992-12-01

    As part of the coal hydrogasification technology development survey project, overseas surveys were carried out as in the preceding fiscal year. With an emphasis placed on the process materials and resources, and on product utilization technologies, surveys and studies were conducted about the trends of development of coal and natural gas resources, and information was collected on energy-related matters in Indonesia and Australia. The need of hydrogasification technology was investigated from the viewpoint of natural resources. Moreover, Japanese engineers were dispatched to APEC (Asia-Pacific Economic Cooperation Conference) New Energy Seminar, Indonesia. Visits were made for information on the natural gas resources at an LNG base in East Kalimantan, Indonesia; coal gasification, energy, and others at CSIRO (Commonwealth Scientific and Industrial Research Organization), Australia; coal bed and methane resources at Warren Center, University of Sydney, Australia; coal bed and methane resources at the Brisbane office, Mitsubishi Gas Chemical Company, Inc.; and coal resources at coal mines of Idemitsu South Queensland Coal Pty Ltd. (NEDO)

  9. Health Technology Assessments of human papillomavirus vaccinations in Europe: a survey from VENICE network

    Directory of Open Access Journals (Sweden)

    Frédérique Dorléans

    2012-03-01

    Full Text Available

    Background: Venice II is a project funded in 2008 by the European centre for disease Prevention and control to collect information on the national vaccination programmes, to increase their knowledge and to know the impact of new vaccines introduced in member states (MS. In 2006-2007, two vaccines against human papillomavirus (HPV were authorized in Europe.
    Methods: an online survey was carried out to investigate the decision-making process undertaken regarding the potential introduction of the HPV vaccinations into MS national immunization pro- grammes as well as to investigate the modalities of implementation of the vaccination programmes. there were specific questions about health technology assessment and reports of the countries that had carried them out were reviewed.
    Results: in 21 of the 29 MS, the national advisory body recommended to introduce HPV vaccination in their national immunization schedule and in 18 countries introduced it. only 6 countries have realized a health technology assessments (Hta report, each one with different methodology, but in all of them both vaccines show positive evaluations.
    Conclusion: from the available Hta, HPV vaccination is cost-effective under the assumption of a life- long protection. Screening programme for cervical cancer and HPV vaccination programme should be always complementary. organizational aspects need to be taken into account to improve the vaccina- tion. HPV vaccination should target girls before the debut of their sexual life. Instead HPV vaccination of boys has not been demonstrated as bringing significant epidemiological benefits and has not been shown as being cost-effective. ...

     

  10. Survey report for fiscal 1998. Survey of creation of highly efficient renewable resources and bioconversion technologies; 1998 nendo chosa hokokusho. Kokoritsu saisei kano shigen no sosei narabini bio conversion gijutsu ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    A survey is conducted concerning environmentally friendly industrial technologies that utilize renewable resources, which are technologies of creating highly renewable resources and converting renewable resources by breeding industrial vegetation. In relation with the creation technologies, the state of research and development of basic technologies is surveyed, which involves the fabrication of environmental stress resisting vegetation, studies for the application of the gene expression control mechanism, introduction of multigenes and site-directed genes, etc. Concerning the respective target products expected to be produced by industrial vegetation, as much information as possible relative to genes is collected on the current state of production, metabolism in vegetation and microbials, and biosynthesis. Surveyed in relation with the bioconversion technology are the conversion of vegetation-derived polymers, construction of environmentally friendly ligno-bioprocess, conversion of sugar, production of biofuels, etc. Furthermore, the technology of treating ligneous wastes with supercritical water is surveyed, this to determine the practicality of the technology at the current stage. (NEDO)

  11. Scientists' motivation to communicate science and technology to the public: surveying participants at the Madrid Science Fair

    OpenAIRE

    Martín-Sempere , María José; Garzón-García , Belén; Rey-Rocha , Jesús

    2008-01-01

    Abstract This paper investigates what motivates scientists to communicate science and technology in a science event involving a direct relationship and interaction with the public. A structured questionnaire survey was administered through face-to-face interviews to 167 research practitioners (researchers, technicians, support staff and fellows) at the Spanish Council for Scientific Research (CSIC) who part...

  12. Current technological clinical practice in breast radiotherapy; results of a survey in EORTC-Radiation Oncology Group affiliated institutions

    NARCIS (Netherlands)

    van der Laan, Hans Paul; Hurkmans, Coen W; Kuten, Abraham; Westenberg, Helen A

    PURPOSE: To evaluate the current technological clinical practice of radiation therapy of the breast in institutions participating in the EORTC-Radiation Oncology Group (EORTC-ROG). MATERIALS AND METHODS: A survey was conducted between August 2008 and January 2009 on behalf of the Breast Working

  13. Report on the Results of the 1988 Survey of Former Biomedical Engineering Technology Students. Research Report Number 56.

    Science.gov (United States)

    Livieratos, Barbara B.

    In spring 1988, a telephone survey was conducted of students who had been enrolled in Howard Community College's (HCC's) Biomedical Engineering Technology (BMET) program between 1972 and 1987. The study sought to gather information for future student recruitment and program planning efforts. Responses were obtained from 43 (35%) of a potential…

  14. A Survey of Exemplar Teachers' Perceptions, Use, and Access of Computer-Based Games and Technology for Classroom Instruction

    Science.gov (United States)

    Proctor, Michael D.; Marks, Yaela

    2013-01-01

    This research reports and analyzes for archival purposes surveyed perceptions, use, and access by 259 United States based exemplar Primary and Secondary educators of computer-based games and technology for classroom instruction. Participating respondents were considered exemplary as they each won the Milken Educator Award during the 1996-2009…

  15. Practices and health perception of preparation of Brassica vegetables: translating survey data to technological and nutritional implications

    NARCIS (Netherlands)

    Nugrahedi, P.Y.; Hantoro, I.; Verkerk, R.; Dekker, M.; Steenbekkers, L.P.A.

    2015-01-01

    Food preparation practices are known to have large nutritional implications on the final product. This article describes survey data on preparation practices of Brassica vegetables and the translation of these data into technological and nutritional implications using knowledge on the mechanisms of

  16. A survey on publications in fusion research and technology science and technology indicators in fusion R and T

    International Nuclear Information System (INIS)

    Hillebrand, C.D.

    1999-01-01

    Scientific publications disseminate research results and are therefore an interesting subject for science and technology analysis. Bibliographic databases contain scientific publications which are indexed and structured. The paper considers Fusion Research and Technology records which are stored in the International Nuclear Information System (INIS) bibliographic database. For the first time, all scientometric and bibliometric information specific to a selected field of science and technology contained in a bibliographic database, using INIS records, is analysed and quantified. A variety of new science and technology indicators which can be used for assessing research and development activities are also presented. (author)

  17. A survey on publications in fusion research and technology science and technology indicators in fusion R and T

    International Nuclear Information System (INIS)

    Hillebrand, C.-D.

    2001-01-01

    Scientific publications disseminate research results and are therefore an interesting subject for science and technology analysis. Bibliographic databases contain scientific publications which are indexed and structured. The paper considers Fusion Research and Technology records which are stored in the International Nuclear Information System (INIS) bibliographic database. For the first time, all scientometric and bibliometric information specific to a selected field of science and technology contained in a bibliographic database, using INIS records, is analysed and quantified. A variety of new science and technology indicators which can be used for assessing research and development activities are also presented. (author)

  18. Fiscal 1999 survey report on long-term energy technological strategies and the like. Long-term energy technological strategy survey (Medium-term energy technological strategy survey); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Choki energy gijutsu senryaku chosa (chuki energy gijutsu senryaku chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Energy strategies to be implemented under the New Sunshine Program by around 2010 have been compiled, with nation's industrial technological strategies, long-term energy outlook, and the like taken into consideration. The present survey aims to work out medium-term energy technological strategies. In Chapter 2, by conducting studies on the state of energy strategies in the national industry technological strategies as primarily compiled, long-term energy supply and demand outlook, and the history so far of the New Sunshine Program, and social conditions surrounding energy/environmental technologies and energy conditions are arranged in order and then analyzed with a view to deriving social needs. In Chapter 3, in view of the derived social needs, medium-term energy technological strategies are broken down into strategic target details, based on the important regions and major and minor strategic targets of the national industry technological strategies. In Chapter 4, medium-term energy technological strategies are worked out. In Chapter 5, 'basic ideas,' 'measures for promoting technology development,' 'return of the fruits to society' are mentioned as the methods of realizing the strategies. In Chapter 6, surveys and researches are summarized, and future development is predicted. (NEDO)

  19. Fiscal 1999 survey report on long-term energy technological strategies and the like. Long-term energy technological strategy survey (Medium-term energy technological strategy survey); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Choki energy gijutsu senryaku chosa (chuki energy gijutsu senryaku chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Energy strategies to be implemented under the New Sunshine Program by around 2010 have been compiled, with nation's industrial technological strategies, long-term energy outlook, and the like taken into consideration. The present survey aims to work out medium-term energy technological strategies. In Chapter 2, by conducting studies on the state of energy strategies in the national industry technological strategies as primarily compiled, long-term energy supply and demand outlook, and the history so far of the New Sunshine Program, and social conditions surrounding energy/environmental technologies and energy conditions are arranged in order and then analyzed with a view to deriving social needs. In Chapter 3, in view of the derived social needs, medium-term energy technological strategies are broken down into strategic target details, based on the important regions and major and minor strategic targets of the national industry technological strategies. In Chapter 4, medium-term energy technological strategies are worked out. In Chapter 5, 'basic ideas,' 'measures for promoting technology development,' 'return of the fruits to society' are mentioned as the methods of realizing the strategies. In Chapter 6, surveys and researches are summarized, and future development is predicted. (NEDO)

  20. Fiscal 1999 survey report. Survey and research concerning development of next-generation chemical process technologies; 1999 nendo jisedai kagaku process gijutsu kaihatsu ni kansuru chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    To further enhance resource/energy conservation and environmental impact reduction, it is necessary to develop innovative chemical reaction process technologies. It is for this reason that 'development of next-generation chemical reaction process technologies' is being carried out under the New Sunshine Program. The survey and research, for the fulfilment of the above goal, aim to select important technologies and put in a easy-to-study order the problems contained in associated technologies for picking out tasks for future studies for the purpose of suggesting some subjects to be taken up for future development. In addition, studies are made about how a comprehensive technology assessment system should be. In this fiscal year, propositions are compiled for research and development projects on five subjects. Studies of subjects other than these five will also continue to eventually build concrete propositions on them. The said five subjects involve 1) the development and application of nonaqueous biotechnologies, 2) biotechnology-aided polymeric material creation processes, 3) construction of high-efficiency energy conservation processes using innovative grain handling technologies in the high-temperature reaction field, 4) manufacture of high-performance polymeric materials for batteries and development of battery fabrication processes, and 5) the development of an energy conservation process maximally utilizing environmentally-friendly polyolefin. (NEDO)

  1. Fiscal 1999 survey report. Survey and research concerning development of next-generation chemical process technologies; 1999 nendo jisedai kagaku process gijutsu kaihatsu ni kansuru chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    To further enhance resource/energy conservation and environmental impact reduction, it is necessary to develop innovative chemical reaction process technologies. It is for this reason that 'development of next-generation chemical reaction process technologies' is being carried out under the New Sunshine Program. The survey and research, for the fulfilment of the above goal, aim to select important technologies and put in a easy-to-study order the problems contained in associated technologies for picking out tasks for future studies for the purpose of suggesting some subjects to be taken up for future development. In addition, studies are made about how a comprehensive technology assessment system should be. In this fiscal year, propositions are compiled for research and development projects on five subjects. Studies of subjects other than these five will also continue to eventually build concrete propositions on them. The said five subjects involve 1) the development and application of nonaqueous biotechnologies, 2) biotechnology-aided polymeric material creation processes, 3) construction of high-efficiency energy conservation processes using innovative grain handling technologies in the high-temperature reaction field, 4) manufacture of high-performance polymeric materials for batteries and development of battery fabrication processes, and 5) the development of an energy conservation process maximally utilizing environmentally-friendly polyolefin. (NEDO)

  2. Survey of the strategic competence needs regarding nuclear technology at present and in the future

    International Nuclear Information System (INIS)

    Karnik, Peter; Hammar, Lennart

    2001-12-01

    The Swedish Nuclear Power Inspectorate (SKI) has been commissioned by the government to present a strategy for future directions and priorities regarding the nuclear technology research. This should be done before the end of year 2001. A part of this work is to determine the national future need of competence and how the competence needs should be satisfied. ES-konsult has been assigned by SKI to evaluate the competence needs - based on a questionnaire survey - for the industry and SKI, especially critical nuclear competence that is needed to maintain safety. The nuclear competence can be decreasing as a result of the political decision that the nuclear power should be phased out in Sweden. The purpose is to use the results from the questionnaire as a starting point and then investigate the demands on relevant education at universities. The questionnaire has been prepared in cooperation with SKI. Data has been collected about strategic nuclear technical competencies divided into eleven different defined competence areas. The questions concerned the number of employees with education from universities, within each of one of the eleven competence areas defined. The need of competent employees should also be predicted looking 10 years ahead from now. When it comes to employees today, they have been divided into different categories depending on education, age and experience. The staff turnover for the last five years was also asked for. In the questionnaire there were also some general questions regarding this matter. The collected data covers 709 employees on the power plants, SKI, SKB, Westinghouse Atom, Studsvik, DNV Nuclear Technology, SQC and KSU. The data is presented and discussed in the report. The role of specific nuclear technical competence in the strategic competence areas is especially discussed. In some cases the competence areas consists of general technical and scientific knowledge that will be available in the future regardless of the nuclear power

  3. Preliminary survey of separations technology applicable to the pretreatment of Hanford tank waste (1992--1993)

    International Nuclear Information System (INIS)

    Lawrence, W.E.; Kurath, D.E.

    1994-04-01

    The US Department of Energy has established the Tank Waste Remediation System (TWRS) to manage and dispose of radioactive wastes stored at the Hanford Site. Within this program are evaluations of pretreatment system alternatives through literature reviews. The information in this report was collected as part of this project at Pacific Northwest Laboratory. A preliminary survey of literature on separations recently entered into the Hanford electronic databases (1992--1993) that have the potential for pretreatment of Hanford tank waste was conducted. Separation processes that can assist in the removal of actinides (uranium, plutonium, americium), lanthanides, barium, 137 Cs, 90 Sr, 129 I, 63 Ni, and 99 Tc were evaluated. Separation processes of interest were identified through literature searches, journal reviews, and participation in separation technology conferences. This report contains brief descriptions of the potential separation processes, the extent and/or selectivity of the separation, the experimental conditions, and observations. Information was collected on both national and international separation studies to provide a global perspective on recent research efforts

  4. Assistive technology use by disability type and race: exploration of a population-based health survey.

    Science.gov (United States)

    Ilunga Tshiswaka, Daudet; Loggins Clay, Shondra; Chiu, Chung-Yi; Alston, Reginald; Lewis, Allen

    2015-09-28

    To examine the relationships among Assistive Technology (AT) use, race, type of disability and selected other demographic characteristics. Using 2009 National Health Interview Survey, descriptive statistics, statistical interactions and binary logistic regression were performed to identify, contrast and predict the likelihood of using AT based on the type of disability among African Americans (AAs) and European Americans (EAs). We found that more AAs (10% within group proportion of total AAs) used AT compared to EAs (7.5% within group proportion of total EAs). Physical (p disabling conditions that predict the use of AT than AAs, whereas AAs had more demographic characteristics beyond race that predict AT use than EAs. Disparities were observed in AT usage by disability types and demographic characteristics between AAs and EAs. Moreover, the predictive strength of AT usage based on disability types and other demographic variables differed by races. Overall, the findings about the different relationships among race, disability type, and AT use are found. Implications for Rehabilitation The finding may inform the development of initiatives by rehabilitation leaders to encourage the use of AT by AAs and EAs according to their type of impairment. Having identified physical impairment as statistically significant predictor of AT use greater among AAs, rehabilitation leaders should ensure that people living with those types of disability have access to the corresponding type of AT and can use them effectively.

  5. Survey on utility technology of a tidal and ocean current energy

    Science.gov (United States)

    Hirose, Manabu; Kadoyu, Masataka; Tanaka, Hiroyoshi

    1987-06-01

    A study is made to show the current technological levels in Japan and other nations regarding the conversion of tidal current or ocean current energy to electric power and to determine the latent energy quantities and energy-related characteristics of tidal and ocean currents. In Japan, relatively large-scale experiments made so far mostly used one of the following three types of devices: Savonius-wheel type, Darrieus-wheel type, and cross-flow-wheel type. Field experiments of tidal energy conversion have been performed at the Naruto and Kurushima Straits. The energy in the Kuroshio current is estimated at about 170 billion kWh per year. Ocean current energy does not undergo large seasonal variations. The total energy in major straits and channels in the Inland Sea and other sea areas to the west is estimated at about 124 billion kWh per year. Tidal current energy shows large seasonal variations, but it is possible to predict the changes. A survey is made to determine energy-related characteristics of a tidal current at Chichino-seto, Kagoshima Prefecture. At Chichino-seto, the flow velocity ranges from 0 to 2.2m/s, with a latent tidal current energy of about 70 kW, of which about 20 kW can actually be utilized.

  6. Technology-Facilitated Sexual Violence Victimization: Results From an Online Survey of Australian Adults.

    Science.gov (United States)

    Powell, Anastasia; Henry, Nicola

    2016-10-01

    Online forms of sexual harassment and abuse as experienced by adults represent an emerging yet under-researched set of behaviors, such that very few studies have sought to estimate the extent of the problem. This article presents the results of an online survey of 2,956 Australian adult (aged 18 to 54 years) experiences of technology-facilitated sexual violence (TFSV) victimization. The prevalence of TFSV was analyzed in relation to a 21-item scale developed in accordance with prior conceptual research identifying multiple dimensions of TFSV including digital sexual harassment, image-based sexual abuse, sexual aggression and/or coercion, and, gender and/or sexuality-based harassment (including virtual sexual violence). Results revealed significant differences in lifetime TFSV victimization for younger (18-24) and non-heterosexual identifying adults. Lifetime TFSV victimization for men and women was not significantly different, though women were more likely to report sexual harassment victimization and men were more likely to report victimization through the distribution of non-consensual images, as well as gender and/or sexuality-based harassment. The authors conclude that although women and men report experiencing similar overall prevalence of TFSV victimization, the nature and impacts of those experiences differ in particular gendered ways that reflect broader patterns in both gender relations and "offline" sexual harassment.

  7. FY 1999 New Sunshine Project survey research project - Survey on the long-term energy technology strategy, etc. Fundamental survey to decide on the industrial technology strategy - Technology strategy by field (Material technology field - Nonferrous metal field); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (bun'yabetsu gijutsu senryaku (zairyo gijutsu bun'ya (hitetsu kinzoku bun'ya)))

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    The survey/study were conducted to contribute to proposing technology strategies such as technical competitive force and the forecast in the material field, especially in the silicon wafer and compound semiconductor field. As to the silicon wafer technology, the following technologies were pointed out as those to be reinforced: future silicon crystals, mirror processing wafer, breakthrough technology needed for super LSI, heat-treated wafer, epitaxial wafer, SOI wafer, measuring/assessment technology, etc. In relation to the compound semiconductor technology, survey/study were made on the bulk crystal growth technology, epitaxial growth technology, crystal growth device technology, wafer processing technology, inspection/evaluation technology, device processing technology, etc. As the comprehensive strategy, the following were proposed: establishment of the place for industry/government/university cooperation, establishment of the center for evaluation of wafer materials/characteristics/process, and establishment of the compound semiconductor R and D center where men of practical business ability from industry/government/university get together and conduct the R and D of production technology and production facilities for compound semiconductor materials and devices. (NEDO)

  8. Embryo transfer techniques: an American Society for Reproductive Medicine survey of current Society for Assisted Reproductive Technology practices.

    Science.gov (United States)

    Toth, Thomas L; Lee, Malinda S; Bendikson, Kristin A; Reindollar, Richard H

    2017-04-01

    To better understand practice patterns and opportunities for standardization of ET. Cross-sectional survey. Not applicable. Not applicable. An anonymous 82-question survey was emailed to the medical directors of 286 Society for Assisted Reproductive Technology member IVF practices. A follow-up survey composed of three questions specific to ET technique was emailed to the same medical directors. Descriptive statistics of the results were compiled. The survey assessed policies, protocols, restrictions, and specifics pertinent to the technique of ET. There were 117 (41%) responses; 32% practice in academic settings and 68% in private practice. Responders were experienced clinicians, half of whom had performed Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

  9. Oxygen toxicity

    Directory of Open Access Journals (Sweden)

    C. A. van der Westhuizen

    1990-07-01

    Full Text Available Oxygen has been discovered about 200 years ago. Since then the vital physiological involvement of oxygen in various biologi­cal processes, mainly energy production, has been established. However, in the body molecular oxygen can be converted to toxic oxygen metabolites such as superoxide anion, hydrogen peroxide, the hydroxyl radical and singlet oxygen. These toxic metabolites are produced mainly in the mitochondria, plasma membranes and endoplasmic reticulum.

  10. A Survey on the Development Status of Nano Technology as a Basic and Fundamental Technology of Nuclear Energy

    International Nuclear Information System (INIS)

    Lee, Byung Chul; Lee, J. Y.; Lee, G. H.

    2010-02-01

    - It is necessary to research and develop high-grade nuclear energy technology such as raising stability of nuclear power generation, improving economic feasibility and managing radioactive wastes. - Innovation of nano technology is composed of each stage as follows Energy source -> conversion to energy -> distribution of energy -> energy storage -> energy use which are a value added system in the part of energy. - It is necessary to strengthen support of the government to raise next-generation human resources for continuous promotion of nuclear energy, referring to KNOO program promoted by the UK government for raising recognition about nuclear energy, raising core human resources and developing next generation core technology

  11. Mobile Technology Use by People Experiencing Multiple Sclerosis Fatigue: Survey Methodology.

    Science.gov (United States)

    Van Kessel, Kirsten; Babbage, Duncan R; Reay, Nicholas; Miner-Williams, Warren M; Kersten, Paula

    2017-02-28

    Fatigue is one of the most commonly reported symptoms of multiple sclerosis (MS). It has a profound impact on all spheres of life, for people with MS and their relatives. It is one of the key precipitants of early retirement. Individual, group, and Internet cognitive behavioral therapy-based approaches to supporting people with MS to manage their fatigue have been shown to be effective. The aim of this project was to (1) survey the types of mobile devices and level of Internet access people with MS use or would consider using for a health intervention and (2) characterize the levels of fatigue severity and their impact experienced by the people in our sample to provide an estimate of fatigue severity of people with MS in New Zealand. The ultimate goal of this work was to support the future development of a mobile intervention for the management of fatigue for people with MS. Survey methodology using an online questionnaire was used to assess people with MS. A total of 51 people with MS participated. The average age was 48.5 years, and the large majority of the sample (77%) was female. Participants reported significant levels of fatigue as measured with the summary score of the Neurological Fatigue Index (mean 31.4 [SD 5.3]). Most (84%) respondents scored on average more than 3 on the fatigue severity questions, reflecting significant fatigue. Mobile phone usage was high with 86% of respondents reporting having a mobile phone; apps were used by 75% of respondents. Most participants (92%) accessed the Internet from home. New Zealand respondents with MS experienced high levels of both fatigue severity and fatigue impact. The majority of participants have a mobile device and access to the Internet. These findings, along with limited access to face-to-face cognitive behavioral therapy-based interventions, create an opportunity to develop a mobile technology platform for delivering a cognitive behavioral therapy-based intervention to decrease the severity and impact of

  12. Educating patients about warfarin therapy using information technology: A survey on healthcare professionals’ perspectives

    Directory of Open Access Journals (Sweden)

    Mullan J

    2012-06-01

    Full Text Available Objective: To explore healthcare professionals’ views about the benefits and challenges of using information technology (IT resources for educating patients about their warfarin therapy.Methods: A cross-sectional survey of both community and hospital-based healthcare professionals (e.g., doctors, pharmacists and nurses involved using a purpose-designed questionnaire. The questionnaires were distributed using a multi-modal approach to maximise response rates.Results: Of the total 300 questionnaires distributed, 109 completed surveys were received (43.3% response rate. Over half (53.2% of the healthcare participants were aged between 40-59 years, the majority (59.5% of whom were female. Fifty nine (54.1% participants reported having had no access to warfarin-specific IT-based patient education resources, and a further 19 (38.0% of the participants who had IT-access reported that they never used such resources. According to the healthcare participants, the main challenges associated with educating their patients about warfarin therapy included: patient-related factors, such as older age, language barriers, cognitive impairments and/or ethnic backgrounds or healthcare professional factors, such as time constraints. The healthcare professionals reported that there were several aspects about warfarin therapy which they found difficult to educate their patients about which is why they identified computers and interactive touch screen kiosks as preferred IT devices to deliver warfarin education resources in general practices, hospital-based clinics and community pharmacies. At the same time, the healthcare professionals also identified a number of facilitators (e.g., to reinforce warfarin education, to offer reliable and easily comprehensible information and barriers (e.g., time and costs of using IT resources, difficulty in operating the resources that could impact on the effective implementation of these devices in educating patients about their

  13. Validation of a novel wearable, wireless technology to estimate oxygen levels and lactate threshold power in the exercising muscle.

    Science.gov (United States)

    Farzam, Parisa; Starkweather, Zack; Franceschini, Maria A

    2018-04-01

    There is a growing interest in monitoring muscle oxygen saturation (SmO 2 ), which is a localized measure of muscle oxidative metabolism and can be acquired continuously and noninvasively using near-infrared spectroscopy (NIRS) methods. Most NIRS systems are cumbersome, expensive, fiber coupled devices, with use limited to lab settings. A novel, low cost, wireless, wearable has been developed for use in athletic training. In this study, we evaluate the advantages and limitations of this new simple continuous-wave (CW) NIRS device with respect to a benchtop, frequency-domain near-infrared spectroscopy (FDNIRS) system. Oxygen saturation and hemoglobin/myoglobin concentration in the exercising muscles of 17 athletic individuals were measured simultaneously with the two systems, while subjects performed an incremental test on a stationary cycle ergometer. In addition, blood lactate concentration was measured at the end of each increment with a lactate analyzer. During exercise, the correlation coefficients of the SmO 2 and hemoglobin/myoglobin concentrations between the two systems were over 0.70. We also found both systems were insensitive to the presence of thin layers of varying absorption, mimicking different skin colors. Neither system was able to predict the athletes' lactate threshold power accurately by simply using SmO 2 thresholds. Instead, the proprietary software of the wearable device was able to predict the athletes' lactate threshold power within half of one power increment of the cycling test. These results indicate this novel wearable device may provide a physiological indicator of athlete's exertion. © 2018 The Authors. Physiological Reports published by Wiley Periodicals, Inc. on behalf of The Physiological Society and the American Physiological Society.

  14. Professional Problems Experienced by Information Technology Teachers and Suggested Solutions: Longitudinal Survey

    Directory of Open Access Journals (Sweden)

    Hafize Keser

    2013-02-01

    Full Text Available The study aimed to determine the opinions of teacher candidates in the fourth year of Computer Education & Instructional Technologies department (CEIT on the Problems Experienced by Information Technology (IT Teachers and Suggested Solutions and it has been designed in case study routine taking place within qualitative research tradition and in a longitudinal survey model. The final year IT teacher candidates receiving education in Ankara University Educational Sciences Faculty CEIT department in academic years 2011-2012 and 2012-2013 have formed the study group of the research (N=123. The data obtained in the research by open-end questionnaire have been analysed and interpreted by inductive encoding technique, freuency analysis and descriptive content analysis. At the end of the study carried out, it has been determined that the IT teacher candidates have handled in two sub-dimensions the problems experienced by the IT teachers, these being, problems towards the courses the IT teachers attend and problems regarding the professional lives of IT teachers and suggested solutions in line with these. The leading problems towards the courses the IT teachers attend are that the courses are optional, the courses are grade-free, the course hours are few, the significance of IT not being comprehended very well by the executives, teachers, parents and students, inadequacy of physical means of IT classes and references of the course. And, the main problems regarding professional lives of IT course teachers are the duty, power and responsibility of IT teachers not made clear enough, difficulties in formative teacher practice, course hours which have to be completed by IT teachers not being able to be completed and problem of permanent staff, the courses that must be attended by IT teachers being taugth by teachers from other branches, lack of executives and experts trained from a field to supervise IT and formative teachers. And, the suggested leading

  15. Attitudes on and usage of balloon catheter technology in rhinology: A survey of the American Rhinologic Society.

    Science.gov (United States)

    Halderman, Ashleigh A; Stokken, Janalee; Momin, Suhael R; Smith, Timothy L; Sindwani, Raj

    2015-01-01

    Use of balloon catheter dilation in the management of paranasal sinus diseases, including chronic rhinosinusitis (CRS) and recurrent acute rhinosinusitis, remains controversial. In an effort to gain some clarity about its evolving role, we surveyed members of the American Rhinologic Society (ARS). Online survey. ARS Members were sent an invitation by e-mail to participate in an online, anonymous 23-item survey. A total of 231 participants completed the survey, for an overall response rate of 25%. Balloon catheter technology (BCT) played no role in the practices of one-third of all the respondents. Of those who did use BCT, more than 50% performed only 1-4 cases per month on average. This did not differ significantly with practice type (p = 0.2988). The overall use of BCT differed between types of practices with those in private practice reporting greater use of the technology for maxillary and sphenoid sinuses (p = 0.0003 and p = 0.0073, respectively). Participants in private practice appeared significantly more impressed with the results of BCT when compared with those in academia (p = 0.0005) and also thought that patients were more satisfied (p = 0.0002). Opinions toward the strength of available evidence also differed significantly between the two groups (p = 0.0007). Thirty-two respondents had experienced a complication with BCT, although the majority of these did not require any intervention. ARS members surveyed used BCT infrequently in their practices. Attitudes on the role of this technology in CRS management differed between academic and private practitioners, but, despite this, the volume of reported BCT use was the same. Surgeons are more accepting of the technology now compared with 5 years ago, and many of them believe that their use of BCT will increase in the future.

  16. [A survey of pubertal development in children born with assisted reproductive technology].

    Science.gov (United States)

    Liu, Zi-Yuan; Wang, Xin-Li; Han, Tong-Yan; Cui, Yun-Pu; Wang, Xue-Mei; Tong, Xiao-Mei; Song, Yi; Wang, Hai-Jun; Li, Song

    2017-06-01

    To investigate the status of pubertal development in children born with assisted reproductive technology (ART). A retrospective analysis was performed on the pubertal development data of children born with ART in Peking University Third Hospital from 1994 to 2003 (ART group). The data in the cross-sectional study "Reports on the Physical Fitness and Health Research of Chinese School Students in 2010" were used as a control. The age at menarche and the age at spermarche were compared between the two groups. The status of pubertal development in the overweight and obese children in the ART group was evaluated to investigate the correlation between pubertal development and body mass index (BMI). A total of 200 children born with ART were enrolled in this study, and 72 of them (41 males and 31 females) completed the survey (response rate=36.0%). In the ART group, the mean age at spermarche and the mean age at menarche were 13.9 years (95%CI: 13.7-14.3 years) and 12.2 years (95%CI: 11.8-12.6 years), respectively. There were no significant differences in the age at spermarche and the age at menarche between the ART and control groups (P>0.05). In the ART group, there were no significant differences in the age at spermarche and the age at menarche between the overweight and obese children and the normal weight children (P>0.05). There were also no significant differences in overweight rate and obesity rate between the children in the ART group and the adolescents in Beijing (P>0.05). In the ART group, there was no significant correlation between the age at spermarche or menarche and BMI (P>0.05). No delayed or precocious puberty is observed in children born with ART. This is consistent with the normal control data. And there is no significant correlation between pubertal development and BMI in children born with ART.

  17. Can consumers save energy? Results from surveys of consumer adoption and use of low and zero carbon technologies

    Energy Technology Data Exchange (ETDEWEB)

    Herring, Horace; Caird, Sally; Roy, Robin [Design Innovation Group, Faculty of Technology, The Open Univ. (United Kingdom)

    2007-07-01

    This paper presents results from a UK Open Univ. research project which surveyed consumers' reasons for adoption - and non-adoption - of domestic energy efficiency measures and renewable energy systems - collectively called low and zero carbon (LZC) technologies. Data was gathered during 2006 via an on-line questionnaire with nearly 400 responses, mainly from 'green' consumers, supplemented by 83 in-depth telephone interviews. These consumer surveys also identified problems and benefits experienced by adopters of these LZC technologies.The paper outlines some results of these surveys, for four established energy efficiency measures - loft insulation, condensing boilers, heating controls, and energy-efficient lighting - and for four renewable energy technologies - solar water heating, solar photovoltaics (PV), micro-wind turbines and wood stoves. These consumers typically adopted the energy efficiency measures and renewable energy systems to save energy, money and/or the environment, which many considered they achieved despite some rebound effects. The reasons for considering but rejecting these LZC technologies include the familiar cost barriers, but there were also other obstacles that varied according to the product or system concerned. An important finding is that most adopters of renewable energy systems have previously adopted two or more energy efficiency measures. Thus one conclusion is: sell energy efficiency first, then renewables. Whilst in the UK very few people have adopted household renewable energy systems, about a third of the consumers in our on-line survey said that they seriously considered adopting a renewable energy technology, although, only about 20 % of these actually did so. There seems to be considerable interest in household renewables in the UK, especially among older, middle class green consumers, but so far only relatively few pioneer adopters (notably retired couples) have managed to overcome the barriers of cost, time

  18. Queer in STEM: Workplace Experiences Reported in a National Survey of LGBTQA Individuals in Science, Technology, Engineering, and Mathematics Careers.

    Science.gov (United States)

    Yoder, Jeremy B; Mattheis, Allison

    2016-01-01

    A survey of individuals working in science, technology, engineering, and mathematics (STEM) fields who identify as lesbian, gay, bisexual, trans*, queer, or asexual (LGTBQA) was administered online in 2013. Participants completed a 58-item questionnaire to report their professional areas of expertise, levels of education, geographic location, and gender and sexual identities and rated their work and social communities as welcoming or hostile to queer identities. An analysis of 1,427 responses to this survey provided the first broad portrait of this population, and it revealed trends related to workplace practices that can inform efforts to improve queer inclusivity in STEM workplaces.

  19. STEM Career Cluster Engineering and Technology Education pathway in Georgia: Perceptions of Georgia engineering and technology education high school teachers and CTAE administrators as measured by the Characteristics of Engineering and Technology Education survey

    Science.gov (United States)

    Crenshaw, Mark VanBuren

    This study examined the perceptions held by Georgia Science, Technology, Engineering, and Mathematics (STEM) Career Cluster Engineering and Technology Education (ETE) high school pathway teachers and Georgia's Career, Technical and Agriculture Education (CTAE) administrators regarding the ETE pathway and its effect on implementation within their district and schools. It provides strategies for ETE teaching methods, curriculum content, STEM integration, and how to improve the ETE pathway program of study. Current teaching and curricular trends were examined in ETE as well as the role ETE should play as related to STEM education. The study, using the Characteristics of Engineering and Technology Education Survey, was conducted to answer the following research questions: (a) Is there a significant difference in the perception of ETE teaching methodology between Georgia ETE high school teachers and CTAE administrators as measured by the Characteristics of Engineering and Technology Education Survey? (b) Is there a significant difference in the perception of ETE curriculum content between Georgia ETE high school teachers and CTAE administrators as measured by the Characteristics of Engineering and Technology Education Survey? (c) Is there a significant difference in the perception of STEM integration in the ETE high school pathway between Georgia ETE high school teachers and CTAE administrators as measured by the Characteristics of Engineering and Technology Education Survey? and (d) Is there a significant difference in the perception of how to improve the ETE high school pathway between Georgia ETE high school teachers and CTAE administrators as measured by the Characteristics of Engineering and Technology Education Survey? Suggestions for further research also were offered.

  20. Decision Point 3 of Statement of Project Objectives (SOPO) “Recovery Act: Development of ITM Oxygen Technology for Integration with Advanced Industrial Systems”

    Energy Technology Data Exchange (ETDEWEB)

    Armstrong, Phillip

    2012-03-01

    Air Products is carrying out a scope of work under Phase 5 of the ITM Oxygen Cooperative Agreement to design, build, and operate a ceramic membrane fabrication facility (the -CerFabII) to enable production of membrane modules to supply a conceptual 2000 ton per day (TPD) ITM Oxygen facility (the -ITM Oxygen Development FacilityII), and to perform supporting development tasks in materials development and engineering development toward industrial, carbon capture and sequestration applications. Air Products is executing this project under the American Recovery and Reinvestment Act (ARRA) with the objective to accelerate the adoption of ITM Oxygen technology to help meet the country’s goals for deploying clean power plants. The objective of this Topical Report is to address the requirements of Decision Point 3 (DP3), which pertains to the status of all Tasks within Phase 5 and most notably the project status of the CerFab (Task 30) prior to authorization of funds for equipment purchase and construction of the facility. The intent of the DP3 is to provide the opportunity for DOE-NETL to review the status of these tasks and to make recommendations on forward project direction, including a recommendation to pass into Budget Period 8. In the area of Materials Development, Air Products has specified a high pressure dilatometer system which will enable measurements of material expansion of ITM ceramic compounds at very high oxygen partial pressures consistent with CCS applications. Under Task 28.2, subcontractor Ceramatec has made significant progress since DP2 in materials selection and process development and improvement for advanced architecture module fabrication. Ceramatec has determined a materials specification, and has selected a process for making the material. Ceramatec has further developed and selected the process for applying the membrane to unsintered advanced architecture wafers with a Two Step process. Ceramatec has built submodules meeting leak rate

  1. FY 2000 report on the survey of long-term energy technology strategy, etc. - Fundamental survey to work out the industrial technology strategy. Research survey on technology innovation indices to be worked out; 2000 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (gijutsu kakushin shihyo no sakutei ni kansuru chosa kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    For technology innovation, it is indispensable to arrange the environment where the continuous and spontaneous technology innovations are generated. >From this point of view, the paper re-confirmed functions of enterprises, universities and national research institutes that are main bodies of technology innovation. For the use for working out measures for activation as the basic data, conducted were the making of indices for surveying the whole system of technology innovation in Japan, and the study of the data to be prepared as statistics and the survey method. In the 1st stage, about 450 figure/table data related to technology innovation were collected for making them database from official statistic data and publications of governments and international organizations in Japan and European countries. Further, using official statistic data, about 240 figure/tables were made which seem to be important as indices of technology innovation. In the 2nd stage, on the basis of this database, the details of the activities were analyzed, and from the indices, the actual situation/subjects were considered. At last, the paper explained the index system of 'Oslo Manual' which is a guideline of working out OECD's innovation indices. (NEDO)

  2. FY 2000 report on the survey of long-term energy technology strategy, etc. - Fundamental survey to work out the industrial technology strategy. Research survey on technology innovation indices to be worked out; 2000 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (gijutsu kakushin shihyo no sakutei ni kansuru chosa kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    For technology innovation, it is indispensable to arrange the environment where the continuous and spontaneous technology innovations are generated. >From this point of view, the paper re-confirmed functions of enterprises, universities and national research institutes that are main bodies of technology innovation. For the use for working out measures for activation as the basic data, conducted were the making of indices for surveying the whole system of technology innovation in Japan, and the study of the data to be prepared as statistics and the survey method. In the 1st stage, about 450 figure/table data related to technology innovation were collected for making them database from official statistic data and publications of governments and international organizations in Japan and European countries. Further, using official statistic data, about 240 figure/tables were made which seem to be important as indices of technology innovation. In the 2nd stage, on the basis of this database, the details of the activities were analyzed, and from the indices, the actual situation/subjects were considered. At last, the paper explained the index system of 'Oslo Manual' which is a guideline of working out OECD's innovation indices. (NEDO)

  3. Assessing the Impact and Effectiveness of the Advanced Technological Education (ATE) Program. 2004 Survey Results. Volume I: Evaluation of the ATE Program Design

    Science.gov (United States)

    Hanssen, Carl E.; Gullickson, Arlen R.

    2004-01-01

    This report presents results from the fifth annual survey of Advanced Technological Education (ATE) projects, centers, and articulation partnerships. ATE has approximately 220 active awards. Of these, 163 ATE-funded projects, centers, and articulation partnerships were asked to participate in the 2004 survey. During the survey administration…

  4. Fiscal 1991 report. Overseas surveys out of surveys for coal hydrogasification technology development; 1991 nendo sekitan suiten gaska gijutsu kaihatsu chosa ni okeru kaigai chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1991-11-01

    For the selection and evaluation of coal gasification processes suitable for substitute natural gas (SNG) production, visits were made to business corporations, research institutes, etc., engaged in the development of coal gasification technology abroad, and surveys were conducted of the development status overseas and information was collected. Visits were made and information was collected on the Lurgi process, a commercial SNG plant, and others at Dakota Gasification Company, U.S.; U-gas process and others at Institute of Gas Technology; energy-related matters at U.S. Department of Energy; coal hydrogasification process and others at Midlands Station, British Gas plc; Shell coal gasification process and others at Amsterdam Research Institute, Royal Dutch Shell; coal gasification, high-temperature desulfurization, and others at KEMA, Holland; and IGCC (integrated gasification combined cycle) verification plant with the Shell coal gasification process incorporated thereinto, now under construction at Demkolec. (NEDO)

  5. Report on the results of the FY 1998 hydrogen utilization international clean energy system technology (WE-NET). Subtask 7. Survey/study on hydrogen utilization technology; 1998 nendo suiso riyo kokusai clean energy system (WE-NET). 7. Suiso riyo gijutsu ni kansuru chosa kento

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The paper described the results of survey/study of the FY 1998 WE-NET project. In Subtask 7, survey/study have been made on the main hydrogen utilization technologies except the hydrogen combustion gas turbine since FY 1993. Based on the survey results having been obtained, study was made on conditions for introducing promising technology, future prospects, etc. in FY 1998. As to the power generation, the basic combustion test and test on hydrogen injection equipment as element test, and test on ignition equipment were carried out using rapid compression/expansion equipment. A scenario for introducing hydrogen vehicle was made, and at the same time environmental LCA was conducted by which environmental influences can be assessed. The survey of the market of pure hydrogen polymer electrolyte fuel cells were made in terms of the electric utility use, industrial use, residential/commercial use, and movement/vehicle use. Study was conducted on the combined process of oxygen production equipment and He Brayton cycle in the subzero fractionation/low-temperature VSA method. Various methods including performance, price, etc. were surveyed/studied, making it a precondition that hydrogen supply stations are installed in stand-alone distribution near places of consumption. (NEDO)

  6. Science and Technology for Communication and Persuasion Abroad: Gap Analysis and Survey

    Science.gov (United States)

    2012-03-01

    technology are heavily influenced by studying technology use in the West—which, some argue, biases the field toward individualist rather than collectivist ...serious games, particularly for non-Western cultures , and to develop new technologies to that end. Such investment should include immersive virtual...environments, which favor different strategies of influence than text-based environments.27 Rilla Khaled, " Culturally -Relevant Persuasive Technology

  7. Is There A Rural-Urban Technology Gap? Results of the ERS Rural Manufacturing Survey

    OpenAIRE

    Gale, H. Frederick, Jr.

    1997-01-01

    Advanced technology use is less prevalent in rural than in urban manufacturing plants, but plants of comparable size in the same industry use about the same level of technology, regardless of urban/rural location. The rural gap comes about because the mix of rural industries is more heavily weighted with "low-technology" industries. Both rural and urban businesses rate inadequate worker skills as the most important barrier to use of new production technologies and management practices, while ...

  8. Report on surveys in fiscal 2000 on the surveys and researches on fundamental technology of polymeric materials in relation to materials nano-technology program; 2000 nendo zairyo nano technology program ni kansuru kobunshi zairyo kiban gijutsu ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-11-01

    On the 'polymeric' technology field being the constitution elementary technology of the material neon-technology program, surveys and researches have been performed through holding workshops on the directionality of technological development to be proceeded in a medium term in the future, and the assignments to be worked on with emphasis. The 'Fundamental technology of polymeric materials workshop' was held together with the 49th polymer discussion meeting, in which 300 persons have attended showing high interest of researchers. With regard to the prospect and possibility of the polymeric technology, statements were given on the ways the polymeric technology development should be in the future, and expectations toward the polymeric technology. In the development assignments for the polymeric technology, discussions were given on the current status and problems in the primary structure control technology, tertiary structure control technology, and surface and interface structure control technology. Discussions were also given on the current status and problems in textiles as the high-order structure control technology, the current status and problems in the material forming technology, and the systematization of the polymeric technology and the knowledge thereof. The core of the polymeric technology is the nano-technology itself, whereas the expectations toward the 'Fundamental Polymeric Technology Research Center' were indicated. (NEDO)

  9. Report on surveys in fiscal 2000 on the surveys and researches on fundamental technology of polymeric materials in relation to materials nano-technology program; 2000 nendo zairyo nano technology program ni kansuru kobunshi zairyo kiban gijutsu ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-11-01

    On the 'polymeric' technology field being the constitution elementary technology of the material neon-technology program, surveys and researches have been performed through holding workshops on the directionality of technological development to be proceeded in a medium term in the future, and the assignments to be worked on with emphasis. The 'Fundamental technology of polymeric materials workshop' was held together with the 49th polymer discussion meeting, in which 300 persons have attended showing high interest of researchers. With regard to the prospect and possibility of the polymeric technology, statements were given on the ways the polymeric technology development should be in the future, and expectations toward the polymeric technology. In the development assignments for the polymeric technology, discussions were given on the current status and problems in the primary structure control technology, tertiary structure control technology, and surface and interface structure control technology. Discussions were also given on the current status and problems in textiles as the high-order structure control technology, the current status and problems in the material forming technology, and the systematization of the polymeric technology and the knowledge thereof. The core of the polymeric technology is the nano-technology itself, whereas the expectations toward the 'Fundamental Polymeric Technology Research Center' were indicated. (NEDO)

  10. Endoscopic and keyhole endoscope-assisted neurosurgical approaches: a qualitative survey on technical challenges and technological solutions.

    Science.gov (United States)

    Marcus, Hani J; Cundy, Thomas P; Hughes-Hallett, Archie; Yang, Guang-Zhong; Darzi, Ara; Nandi, Dipankar

    2014-10-01

    The literature reflects a resurgence of interest in endoscopic and keyhole endoscope-assisted neurosurgical approaches as alternatives to conventional microsurgical approaches in carefully selected cases. The aim of this study was to assess the technical challenges of neuroendoscopy, and the scope for technological innovations to overcome these barriers. All full members of the Society of British Neurosurgeons (SBNS) were electronically invited to participate in an online survey. The open-ended structured survey asked three questions; firstly, whether the surgeon presently utilises or has experience with endoscopic or endoscope-assisted approaches; secondly, what they consider to be the major technical barriers to adopting such approaches; and thirdly, what technological advances they foresee improving safety and efficacy in the field. Responses were subjected to a qualitative research method of multi-rater emergent theme analysis. Three clear themes emerged: 1) surgical approach and better integration with image-guidance systems (20%), 2) intra-operative visualisation and improvements in neuroendoscopy (49%), and 3) surgical manipulation and improvements in instruments (74%). The analysis of responses to our open-ended survey revealed that although opinion was varied three major themes could be identified. Emerging technological advances such as augmented reality, high-definition stereo-endoscopy, and robotic joint-wristed instruments may help overcome the technical difficulties associated with neuroendoscopic approaches. Results of this qualitative survey provide consensus amongst the technology end-user community such that unambiguous goals and priorities may be defined. Systems integrating these advances could improve the safety and efficacy of endoscopic and endoscope-assisted neurosurgical approaches.

  11. Oxygen Therapy

    Science.gov (United States)

    ... their breathing to dangerously low levels. Will I need oxygen when I sleep? Usually if you use supplemental oxygen during the ... your health care provider tells you you only need to use oxygen for exercise or sleep. Even if you feel “fine” off of your ...

  12. Fiscal 2000 survey report. Survey and study of constellation satellites technology; 2000 nendo chosa hokokusho. Konsutereshon eisei gijutsu ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Demands for constellation satellites were surveyed and satellite systems were studied for extracting basic technical tasks relative to constellation satellite systems and for drafting space verification plans. For a constellation satellite system to accomplish its missions, two or more satellites have to be simultaneously navigated. It is assumed that its field of application will cover earth observation, information communication, risk management, disaster prevention, and the like. With such applications taken into consideration, surveys and studies were conducted about the need and marketability of constellation satellites, need of state-level involvement, and requests for missions to be imposed on a constellation system. For plural satellites to satisfy mission requests by coordinating with each other, it will be necessary to develop basic technologies, such as navigational guidance, communications control, system autonomous management, and operation on the ground. Functions and performance that a constellation satellite system are requested to have and basic technologies to be studied and developed were extracted, and space verification plans were drafted. (NEDO)

  13. Oxygen enrichment incineration

    International Nuclear Information System (INIS)

    Kim, Jeong Guk; Yang, Hee Chul; Park, Geun Il; Kim, Joon Hyung

    2000-10-01

    Oxygen enriched combustion technology has recently been used in waste incineration. To apply the oxygen enrichment on alpha-bearing waste incineration, which is being developed, a state-of-an-art review has been performed. The use of oxygen or oxygen-enriched air instead of air in incineration would result in increase of combustion efficiency and capacity, and reduction of off-gas product. Especially, the off-gas could be reduced below a quarter, which might reduce off-gas treatment facilities, and also increase an efficiency of off-gas treatment. However, the use of oxygen might also lead to local overheating and high nitrogen oxides (NOx) formation. To overcome these problems, an application of low NOx oxy-fuel burner and recycling of a part of off-gas to combustion chamber have been suggested

  14. Oxygen enrichment incineration

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jeong Guk; Yang, Hee Chul; Park, Geun Il; Kim, Joon Hyung

    2000-10-01

    Oxygen enriched combustion technology has recently been used in waste incineration. To apply the oxygen enrichment on alpha-bearing waste incineration, which is being developed, a state-of-an-art review has been performed. The use of oxygen or oxygen-enriched air instead of air in incineration would result in increase of combustion efficiency and capacity, and reduction of off-gas product. Especially, the off-gas could be reduced below a quarter, which might reduce off-gas treatment facilities, and also increase an efficiency of off-gas treatment. However, the use of oxygen might also lead to local overheating and high nitrogen oxides (NOx) formation. To overcome these problems, an application of low NOx oxy-fuel burner and recycling of a part of off-gas to combustion chamber have been suggested.

  15. FY 1999 New Sunshine Project survey research project - Survey on the long-term energy technology strategy, etc. Fundamental survey to decide on the industrial technology strategy - Technology strategy by field (Aerospace technology field - Airplane technology field); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (bun'yabetsu gijutsu senryaku (koku uchu gijutsu bun'ya (kokuki gijutsu bun'ya)))

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    The survey/study were conducted to contribute to proposing technology strategies such as the analysis of the present state of technical competitive force and the forecast in the airplane technology field. In future airplane industry, to meet the requests/restrictions from the society in the international airplane industry in the recent years, it is predicted that technology innovation will advance centering on the following four fields: next generation airplane technology to enable the innovative cost reduction in development/production, technology to realize the substantial reduction in flight cost of airline, technology to enhance reliability for the next generation flight which meets the multi-frequency flight/increasing demand for small plane, and airplane frontier technology. Moreover, regulations especially on noise, CO2 reduction and NOx reduction are becoming very strict internationally because of the increasing concern about global environmental problems. It is urgently needed to establish technology to cope with these trends. As the comprehensive strategy, the following are considered: development of airframe under the leadership of Japan and securing of the demand, efficient arrangement and operation of large-scale experimental facilities, IT adoption to the airplane industry, organic cooperation by industry/university/government, etc. (NEDO)

  16. Leading survey and research report for fiscal 1999. Survey and research on chemical reaction simulator technology; 1999 nendo kagaku hanno simulator gijutsu no chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Although various chemical reactions are made use of at scenes of chemical industry for the acquisition of desired chemicals, the control of reaction process governing factors, such as temperature, pressure, catalysts, solutions, etc., is found to be carried out only on the empirical basis. At the present time, rational or optimum reaction designs are not to be prepared in a short period of time in the presence of the widespread shortage of knowledge about chemical reactions and of the shortage of understanding of chemical reactions at the micro level. Leading survey and research are conducted for the development of a 'chemical reaction simulator' technology to enable the acquisition of optimum reaction designing guidelines in a short period of time. Using the simulator, a chemical of his choice is inputted by a researcher engaged in the study of an real chemical reaction and then various techniques of computer science are mobilized for the preparation of a huge number of feasible reaction routes, and high-precision simulations are conducted for the feasible reaction routes. The results achieved this fiscal year are reported. The purpose of this research and its ripple effect on new product industry creation are stated. Then the positioning, mission, and concept of such a chemical reaction simulator are described. Finally, the result of research and survey of knowledge databases and the result of research and survey of computational chemistry are stated. (NEDO)

  17. Leading survey and research report for fiscal 1999. Survey and research on chemical reaction simulator technology; 1999 nendo kagaku hanno simulator gijutsu no chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Although various chemical reactions are made use of at scenes of chemical industry for the acquisition of desired chemicals, the control of reaction process governing factors, such as temperature, pressure, catalysts, solutions, etc., is found to be carried out only on the empirical basis. At the present time, rational or optimum reaction designs are not to be prepared in a short period of time in the presence of the widespread shortage of knowledge about chemical reactions and of the shortage of understanding of chemical reactions at the micro level. Leading survey and research are conducted for the development of a 'chemical reaction simulator' technology to enable the acquisition of optimum reaction designing guidelines in a short period of time. Using the simulator, a chemical of his choice is inputted by a researcher engaged in the study of an real chemical reaction and then various techniques of computer science are mobilized for the preparation of a huge number of feasible reaction routes, and high-precision simulations are conducted for the feasible reaction routes. The results achieved this fiscal year are reported. The purpose of this research and its ripple effect on new product industry creation are stated. Then the positioning, mission, and concept of such a chemical reaction simulator are described. Finally, the result of research and survey of knowledge databases and the result of research and survey of computational chemistry are stated. (NEDO)

  18. Surveys and researches on trends of technologies related to hydrogen; Suiso ni kansuru gijutsu doko chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1983-03-01

    This report covers surveys of the latest technological trends in relation to the production, storage, and transportation of hydrogen as energy. Also included in the report are surveys of hydrogen, fuel cells, and wind energy centering about Europe. At the 4th World Hydrogen Energy Conference (Pasadena, U.S., June 1982), a number of essays were presented concerning the utilization of hydrogen, production of hydrogen, thermochemical processes, hybrid processes, photochemical processes, photo/thermochemical processes, other processes, fuel cells, metallic hydrides, etc. This report particularly describes in detail the trends of technologies involving the production of hydrogen by the electrolysis of water and by thermochemical processes. As for the recent trend of the metallic hydride technology, reports are made on the International Symposium on the Properties and Applications of Metal Hydrides (Toba, Japan, June 1982) and on Japan's research on the application of metallic hydrides. Concerning the trends in Europe of technologies relative to hydrogen, fuel cells, and wind energy, the results of the research group's on-site investigations are reported. (NEDO)

  19. Surveys and researches on trends of technologies related to hydrogen; Suiso ni kansuru gijutsu doko chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1983-03-01

    This report covers surveys of the latest technological trends in relation to the production, storage, and transportation of hydrogen as energy. Also included in the report are surveys of hydrogen, fuel cells, and wind energy centering about Europe. At the 4th World Hydrogen Energy Conference (Pasadena, U.S., June 1982), a number of essays were presented concerning the utilization of hydrogen, production of hydrogen, thermochemical processes, hybrid processes, photochemical processes, photo/thermochemical processes, other processes, fuel cells, metallic hydrides, etc. This report particularly describes in detail the trends of technologies involving the production of hydrogen by the electrolysis of water and by thermochemical processes. As for the recent trend of the metallic hydride technology, reports are made on the International Symposium on the Properties and Applications of Metal Hydrides (Toba, Japan, June 1982) and on Japan's research on the application of metallic hydrides. Concerning the trends in Europe of technologies relative to hydrogen, fuel cells, and wind energy, the results of the research group's on-site investigations are reported. (NEDO)

  20. Oxygen Therapy

    Directory of Open Access Journals (Sweden)

    Bonnie Solmes

    2000-01-01

    Full Text Available LTOT is prescribed for people with chronic lung disease in whom there is a decrease in the ability of the lungs to supply enough oxygen to the body. The heart is obliged to pump faster to meet the body's oxygen requirements. This may place undue stress on the heart, resulting in palpitations, dizziness and fatigue. A low oxygen level in arterial blood is also harmful to the heart, the brain and the pulmonary blood vessels. Oxygen therapy is used to break this cycle. A person with low blood oxygen will often be able to accomplish more with less fatigue with the help of supplemental oxygen therapy. Shortness of breath is a mechanical problem resulting from the effects of chronic obstructive pulmonary disease. Oxygen therapy may or may not reduce shortness of breath, but it will help the lungs and heart to function with less stress.

  1. Preferences of Young Adults With First-Episode Psychosis for Receiving Specialized Mental Health Services Using Technology: A Survey Study.

    Science.gov (United States)

    Lal, Shalini; Dell'Elce, Jennifer; Tucci, Natasha; Fuhrer, Rebecca; Tamblyn, Robyn; Malla, Ashok

    2015-01-01

    Despite the potential and interest of using technology for delivering specialized psychiatric services to young adults, surprisingly limited attention has been paid to systematically assess their perspectives in this regard. For example, limited knowledge exists on the extent to which young people receiving specialized services for a first-episode psychosis (FEP) are receptive to using new technologies as part of mental health care, and to which types of technology-enabled mental health interventions they are amenable to. The purpose of this study is to assess the interest of young adults with FEP in using technology to receive mental health information, services, and supports. This study uses a cross-sectional, descriptive survey design. A convenience sample of 67 participants between the ages of 18 and 35 were recruited from two specialized early intervention programs for psychosis. Interviewer-administered surveys were conducted between December 2013 and October 2014. Descriptive statistics are reported. Among the 67 respondents who completed the survey, the majority (85%, 57/67) agreed or strongly agreed with YouTube as a platform for mental health-related services and supports. The top five technology-enabled services that participants were amenable to were (1) information on medication (96%, 64/67); (2) information on education, career, and employment (93%, 62/67); (3) decision-making tools pertaining to treatment and recovery (93%, 62/67); (4) reminders for appointments via text messaging (93%, 62/67); and (5) information about mental health, psychosis, and recovery in general (91%, 61/67). The top self-reported barriers to seeking mental health information online were lack of knowledge on how to perform an Internet search (31%, 21/67) and the way information is presented online (27%, 18/67). Two thirds (67%; 45/67) reported being comfortable in online settings, and almost half (48%; 32/67) reported a preference for mixed formats when viewing mental health

  2. A survey of contemporary enterprise storage technologies from a digital forensics perspective

    Directory of Open Access Journals (Sweden)

    Gregory H. Carlton

    2011-09-01

    Full Text Available As the proliferation of digital computational systems continue to expand, increasingly complex technologies emerge, including those regarding large, enterprise-wide, information storage and retrieval systems. Within this study, we examine four contemporary enterprise storage technologies. Our examination of these technologies is presented with an overview of the technological features of each offering and then followed with a discussion of the impact of these technologies on digital forensics methods, particularly regarding forensic data acquisition. We offer a general opinion concerning a recommended data acquisition method when faced with the task of obtaining a forensic image of data contained within these technologies, we discuss limitations of our study, and lastly, we suggest areas in which additional research would benefit the field of digital forensics.

  3. Survey of technology for decommissioning of nuclear fuel cycle facilities. 8. Remote handling and cutting techniques

    Energy Technology Data Exchange (ETDEWEB)

    Ogawa, Ryuichiro; Ishijima, Noboru [Japan Nuclear Cycle Development Inst., Oarai, Ibaraki (Japan). Oarai Engineering Center

    1999-03-01

    In nuclear fuel cycle facility decommissioning and refurbishment, the remote handling techniques such as dismantling, waste handling and decontamination are needed to reduce personnel radiation exposure. The survey research for the status of R and D activities on remote handling tools suitable for nuclear facilities in the world and domestic existing commercial cutting tools applicable to decommissioning of the facilities was conducted. In addition, the drive mechanism, sensing element and control system applicable to the remote handling devices were also surveyed. This report presents brief surveyed summaries. (H. Itami)

  4. A survey of nursing faculty needs for training in use of new technologies for education and practice.

    Science.gov (United States)

    Nguyen, Diane N; Zierler, Brenda; Nguyen, Huong Q

    2011-04-01

    This study describes nursing faculty's use, knowledge of, and training needs associated with distance learning, simulation, telehealth, and informatics tools in nursing education and practice. Web-based surveys were completed by 193 faculty members from nursing schools in the western United States. More than half of the respondents were frequent users of distance learning and informatics tools. Approximately 66% of faculty reported they were competent with distance learning and informatics tools. Training and technical support for the use of distance learning was highest, yet 69% of faculty still reported a need for additional training. The availability of training and financial and technical support was associated with greater use of distance learning technologies (p technologies, the findings suggest nursing faculty perceive a need for training and support to effectively use educational technologies in nursing education. Copyright 2011, SLACK Incorporated.

  5. Free and open source enabling technologies for patient-centric, guideline-based clinical decision support: a survey.

    Science.gov (United States)

    Leong, T Y; Kaiser, K; Miksch, S

    2007-01-01

    Guideline-based clinical decision support is an emerging paradigm to help reduce error, lower cost, and improve quality in evidence-based medicine. The free and open source (FOS) approach is a promising alternative for delivering cost-effective information technology (IT) solutions in health care. In this paper, we survey the current FOS enabling technologies for patient-centric, guideline-based care, and discuss the current trends and future directions of their role in clinical decision support. We searched PubMed, major biomedical informatics websites, and the web in general for papers and links related to FOS health care IT systems. We also relied on our background and knowledge for specific subtopics. We focused on the functionalities of guideline modeling tools, and briefly examined the supporting technologies for terminology, data exchange and electronic health record (EHR) standards. To effectively support patient-centric, guideline-based care, the computerized guidelines and protocols need to be integrated with existing clinical information systems or EHRs. Technologies that enable such integration should be accessible, interoperable, and scalable. A plethora of FOS tools and techniques for supporting different knowledge management and quality assurance tasks involved are available. Many challenges, however, remain in their implementation. There are active and growing trends of deploying FOS enabling technologies for integrating clinical guidelines, protocols, and pathways into the main care processes. The continuing development and maturation of such technologies are likely to make increasingly significant contributions to patient-centric, guideline-based clinical decision support.

  6. ITEP: A survey of innovative environmental restoration technologies in the Netherlands and France

    International Nuclear Information System (INIS)

    Roberds, W.J.; Voss, C.F.; Hitchcock, S.A.

    1995-05-01

    The International Technology Exchange Program (ITEP) of the Department of Energy's (DOE's) Office of Environmental Management (EM) is responsible for promoting the import of innovative technologies to better address EM's needs and the export of US services into foreign markets to enhance US competitiveness. Under this program, potentially innovative environmental restoration technologies, either commercially available or under development in the Netherlands and France, were identified, described, and evaluated. It was found that 12 innovative environmental restoration technologies, which are either commercially available or under development in the Netherlands and France, may have some benefit for the DOE EM program and should be considered for transfer to the United States

  7. Estimates of Nitrogen, Phosphorus, Biochemical Oxygen Demand, and Fecal Coliforms Entering the Environment Due to Inadequate Sanitation Treatment Technologies in 108 Low and Middle Income Countries.

    Science.gov (United States)

    Fuhrmeister, Erica R; Schwab, Kellogg J; Julian, Timothy R

    2015-10-06

    Understanding the excretion and treatment of human waste (feces and urine) in low and middle income countries (LMICs) is necessary to design appropriate waste management strategies. However, excretion and treatment are often difficult to quantify due to decentralization of excreta management. We address this gap by developing a mechanistic, stochastic model to characterize phosphorus, nitrogen, biochemical oxygen demand (BOD), and fecal coliform pollution from human excreta for 108 LMICs. The model estimates excretion and treatment given three scenarios: (1) use of existing sanitation systems, (2) use of World Health Organization-defined "improved sanitation", and (3) use of best available technologies. Our model estimates that more than 10(9) kg/yr each of phosphorus, nitrogen and BOD are produced. Of this, 22(19-27)%, 11(7-15)%, 17(10-23)%, and 35 (23-47)% (mean and 95% range) BOD, nitrogen, phosphorus, and fecal coliforms, respectively, are removed by existing sanitation systems. Our model estimates that upgrading to "improved sanitation" increases mean removal slightly to between 17 and 53%. Under the best available technology scenario, only approximately 60-80% of pollutants are treated. To reduce impact of nutrient and microbial pollution on human and environmental health, improvements in both access to adequate sanitation and sanitation treatment efficiency are needed.

  8. Technology Assessment for Proof-of-Concept UF6 Cylinder Unique Identification Task 3.1.2 Report – Survey and Assessment of Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Wylie, Joann; Hockert, John

    2014-04-24

    The National Nuclear Security Administration (NNSA) Office of Nonproliferation and International Security’s (NA-24) Next Generation Safeguards Initiative (NGSI) and the nuclear industry have begun to develop approaches to identify and monitor uranium hexafluoride (UF6) cylinders. The NA-24 interest in a global monitoring system for UF6 cylinders relates to its interest in supporting the International Atomic Energy Agency (IAEA) in deterring and detecting diversion of UF6 (e.g., loss of cylinder in transit) and undeclared excess production at conversion and enrichment facilities. The industry interest in a global monitoring system for UF6 cylinders relates to the improvements in operational efficiencies that such a system would provide. This task is part of an effort to survey and assess technologies for a UF6 cylinder to identify candidate technologies for a proof-of-concept demonstration and evaluation for the Cylinder Identification System (CIS).

  9. In-plane technologies for transflective mobile displays: A Literature Survey

    NARCIS (Netherlands)

    Strömer, J.F.

    2007-01-01

    This report discusses the optical design of transflective displaysusing in-plane technologies, such as IPS or FFS. It demonstrates theevolutional develpement of the technology of important companies and Universities that are active in this area. It discusses relevant theoretical studies and

  10. Technology Use among Adults Who Are Deaf and Hard of Hearing: A National Survey

    Science.gov (United States)

    Maiorana-Basas, Michella; Pagliaro, Claudia M.

    2014-01-01

    As society becomes increasingly more dependent on technology, information regarding the use, preference, and accessibility of commonly used devices and services among individuals who are deaf and hard of hearing (DHH) is crucial. Developing technologies that are functional and appropriately accessible allows persons who are DHH to fully…

  11. Technological Change in the Workplace: A Statewide Survey of Community College Library and Learning Resources Personnel.

    Science.gov (United States)

    Poole, Carolyn E.; Denny, Emmett

    2001-01-01

    Discussion of the effects of technostress on library personnel focuses on an investigation that examined how employees in Florida community college libraries and learning resources centers are dealing with technological change in their work environment. Considers implications for planning and implementing technological change and includes…

  12. A Survey of Pre-Service Teachers' Acceptance of Technology in Thailand

    Science.gov (United States)

    Teo, Timothy; Khlaisang, Jintavee; Thammetar, Thapanee; Ruangrit, Nammon; Satiman, Anirut; Sunphakitjumnong, Kobkul

    2014-01-01

    In the recent decade, Thailand has launched many initiatives to ensure that technology is integrated into the school curriculum. Despite the investment and efforts of the government, few studies have been conducted to examine users' acceptance of technology. Given that educators are the change agents in many educational initiatives, it is…

  13. Pre-Service Teachers' Attitude towards Information and Communication Technology Usage: A Ghanaian Survey

    Science.gov (United States)

    Gyamfi, Stephen Adu

    2017-01-01

    This study employed the Technology Acceptance Model (TAM) to empirically investigate factors that influence Ghanaian pre-service teachers' attitudes towards Information and Communication Technology (ICT) usage. To achieve this aim, the study extended the TAM framework by adding leadership support and job relevance as exogenous variables. Data were…

  14. A Survey of EFL Learners' Attitudes toward Information and Communication Technologies

    Science.gov (United States)

    Liu, Junhong

    2009-01-01

    In response to the widespread use of and ever-changing nature of Information and Communication Technologies (ICT), various investigations were carried out regarding attitudes toward ICT. This paper attempted to investigate college non-English majors' attitudes toward the integration of Information and Communication Technologies into English…

  15. Successful implementation of new technologies in nursing care: a questionnaire survey of nurse-users.

    NARCIS (Netherlands)

    Veer, A.J.E. de; Fleuren, M.A.H.; Bekkema, N.; Francke, A.L.

    2011-01-01

    BACKGROUND: A growing number of new technologies are becoming available within nursing care that can improve the quality of care, reduce costs, or enhance working conditions. However, such effects can only be achieved if technologies are used as intended. The aim of this study is to gain a better

  16. Successful implementation of new technologies in nursing care: A questionnaire survey of nurse-users

    NARCIS (Netherlands)

    Veer, A.J.E. de; Fleuren, M.A.H.; Bekkema, N.; Francke, A.L.

    2011-01-01

    Background: A growing number of new technologies are becoming available within nursing care that can improve the quality of care, reduce costs, or enhance working conditions. However, such effects can only be achieved if technologies are used as intended. The aim of this study is to gain a better

  17. The status of training and education in information and computer technology of Australian nurses: a national survey.

    Science.gov (United States)

    Eley, Robert; Fallon, Tony; Soar, Jeffrey; Buikstra, Elizabeth; Hegney, Desley

    2008-10-01

    A study was undertaken of the current knowledge and future training requirements of nurses in information and computer technology to inform policy to meet national goals for health. The role of the modern clinical nurse is intertwined with information and computer technology and adoption of such technology forms an important component of national strategies in health. The majority of nurses are expected to use information and computer technology during their work; however, the full extent of their knowledge and experience is unclear. Self-administered postal survey. A 78-item questionnaire was distributed to 10,000 Australian Nursing Federation members to identify the nurses' use of information and computer technology. Eighteen items related to nurses' training and education in information and computer technology. Response rate was 44%. Computers were used by 86.3% of respondents as part of their work-related activities. Between 4-17% of nurses had received training in each of 11 generic computer skills and software applications during their preregistration/pre-enrolment and between 12-30% as continuing professional education. Nurses who had received training believed that it was adequate to meet the needs of their job and was given at an appropriate time. Almost half of the respondents indicated that they required more training to better meet the information and computer technology requirements of their jobs and a quarter believed that their level of computer literacy was restricting their career development. Nurses considered that the vast majority of employers did not encourage information and computer technology training and, for those for whom training was available, workload was the major barrier to uptake. Nurses favoured introduction of a national competency standard in information and computer technology. For the considerable benefits of information and computer technology to be incorporated fully into the health system, employers must pay more attention

  18. Facilitating out-of-home caregiving through health information technology: survey of informal caregivers' current practices, interests, and perceived barriers.

    Science.gov (United States)

    Zulman, Donna M; Piette, John D; Jenchura, Emily C; Asch, Steven M; Rosland, Ann-Marie

    2013-07-10

    Many patients with chronic conditions are supported by out-of-home informal caregivers-family members, friends, and other individuals who provide care and support without pay-who, if armed with effective consumer health information technology, could inexpensively facilitate their care. We sought to understand caregivers' use of, interest in, and perceived barriers to health information technology for out-of-home caregiving. We conducted 2 sequential Web-based surveys with a national sample of individuals who provide out-of-home caregiving to an adult family member or friend with a chronic illness. We queried respondents about their use of health information technology for out-of-home caregiving and used multivariable regression to investigate caregiver and care-recipient characteristics associated with caregivers' technology use for caregiving. Among 316 out-of-home caregiver respondents, 34.5% (109/316) reported using health information technology for caregiving activities. The likelihood of a caregiver using technology increased significantly with intensity of caregiving (as measured by number of out-of-home caregiving activities). Compared with very low intensity caregivers, the adjusted odds ratio (OR) of technology use was 1.88 (95% CI 1.01-3.50) for low intensity caregivers, 2.39 (95% CI 1.11-5.15) for moderate intensity caregivers, and 3.70 (95% CI 1.62-8.45) for high intensity caregivers. Over 70% (149/207) of technology nonusers reported interest in using technology in the future to support caregiving. The most commonly cited barriers to technology use for caregiving were health system privacy rules that restrict access to care-recipients' health information and lack of familiarity with programs or websites that facilitate out-of-home caregiving. Health information technology use for out-of-home caregiving is common, especially among individuals who provide more intense caregiving. Health care systems can address the mismatch between caregivers' interest

  19. Fiscal 1999 survey report. Survey of long-term strategy for energy technology: Volume 1 (Survey of foundation for strategy formulation for industrial technologies - strategy for environmental foundation buildup); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. 1. Sangyo gijutsu senryaku sakutei kiban chosa (kankyo kiban seibi senryaku)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Japan has to prepare itself to behave accurately, and to stay technologically competitive, in the severe competition age to come in which it will fail to find leaders to follow. To fulfill this goal, Japan has to collect sufficient information and analyze it relative to the current state and future prospect of industrial technologies in Japan and overseas and various factors that will influence them, and to develop industrial technology related policies based firmly on scientific and theoretical foundations to be established using the thus-acquired knowledge. Under the circumstances, a survey is conducted of innovative, technological foundations, such as industrial technology related efforts in and out of Japan. The report consists of two volumes that cover what are described below. For the survey of technology related policies pursued in various countries abroad, literature and the like are investigated concerning technology related measures, budgets, and decision making processes in America, Britain, Germany, France, and the European Union, and the results are compiled so that their systems may be compared with each other. In the survey of Japan's technology related innovative systems, case studies are made about commodities over which Japan is relatively high in competitive power. Specifically, commodities manufactured by Japan's businesses and occupying 75% or more of the global share are investigated. (NEDO)

  20. Fiscal 1999 survey report. Survey of long-term strategy for energy technology: Volume 1 (Survey of foundation for strategy formulation for industrial technologies - strategy for environmental foundation buildup); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. 1. Sangyo gijutsu senryaku sakutei kiban chosa (kankyo kiban seibi senryaku)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Japan has to prepare itself to behave accurately, and to stay technologically competitive, in the severe competition age to come in which it will fail to find leaders to follow. To fulfill this goal, Japan has to collect sufficient information and analyze it relative to the current state and future prospect of industrial technologies in Japan and overseas and various factors that will influence them, and to develop industrial technology related policies based firmly on scientific and theoretical foundations to be established using the thus-acquired knowledge. Under the circumstances, a survey is conducted of innovative, technological foundations, such as industrial technology related efforts in and out of Japan. The report consists of two volumes that cover what are described below. For the survey of technology related policies pursued in various countries abroad, literature and the like are investigated concerning technology related measures, budgets, and decision making processes in America, Britain, Germany, France, and the European Union, and the results are compiled so that their systems may be compared with each other. In the survey of Japan's technology related innovative systems, case studies are made about commodities over which Japan is relatively high in competitive power. Specifically, commodities manufactured by Japan's businesses and occupying 75% or more of the global share are investigated. (NEDO)

  1. International survey of methods used in health technology assessment (HTA: does practice meet the principles proposed for good research?

    Directory of Open Access Journals (Sweden)

    Stephens JM

    2012-08-01

    Full Text Available Jennifer M Stephens,1 Bonnie Handke,2 Jalpa A Doshi3 On behalf of the HTA Principles Working Group, part of the International Society for Pharmacoeconomics and Outcomes Research (ISPOR HTA Special Interest Group (SIG1Pharmerit International, Bethesda, MD, USA; 2Medtronic Neuromodulation, Minneapolis, MN, USA; 3Center for Evidence-Based Practice and Center for Health Incentives and Behavioral Economics, Perelman School of Medicine, University of Pennsylvania, Philadelphia, PA, USAObjective: To describe research methods used internationally in health technology assessment (HTA and health-care reimbursement policies; compare the survey findings on research methods and processes to published HTA principles; and discuss important issues/trends reported by HTA bodies related to current research methods and applications of the HTA process.Methods: Representatives from HTA bodies worldwide were recruited to complete an online survey consisting of 47 items within four topics: (1 organizational information and process, (2 primary HTA methodologies and importance of attributes, (3 HTA application and dissemination, and (4 quality of HTA, including key issues. Results were presented as a comparison of current HTA practices and research methods to published HTA principles.Results: The survey was completed by 30 respondents representing 16 countries in five major regions, Australia (n = 3, Canada (n = 2, Europe (n = 17, Latin America (n = 2, and the United States (n = 6. The most common methodologies used were systematic review, meta-analysis, and economic modeling. The most common attributes evaluated were effectiveness (more commonly than efficacy, cost-effectiveness, safety, and quality of life. The attributes assessed, relative importance of the attributes, and conformance with HTA principles varied by region/country. Key issues and trends facing HTA bodies included standardizing methods for economic evaluations and grading of evidence, lack of evidence

  2. Survey of the development of industrial technology in Japan; Sangyo gijutsu rekishi keisho chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Conditions for creating Japan`s type technologies have been investigated by extracting technologies and experiences meriting the succession to the next generation among the industrial technologies in Japan after World War II. Technological creativity of Japan began to appear from the 1970`s. Quartz watch of SEIKO, U-Matic VTR of SONY, ladle refinery method of DAIDO Steel, PAN-based carbon fiber of TORAY, continuous annealing of Nippon Steel, calculating machine using liquid crystal of SHARP, ASA-400 high sensitivity film of FUJI FILM, and Japanese word-processor of TOSHIBA are the examples. The basic ability to create those products and technology lays in the diversity of firms in electronic device and fine machinery industries consisting the boundary between general and electrical machinery, the systematizing ability and inter-industrial cooperation which were promoted through quality control, automatization of assembly and production control by computer, and the research and development capability which has been brought up during the high economic growth as a learning process of technology. The society and industries have to make efforts to create the new creative conditions for younger generations. Otherwise, Japan`s technology will not develop. 134 refs., 19 figs., 8 tabs.

  3. Towards User Acceptance of Biometric Technology in E-Government: A Survey Study in the Kingdom of Saudi Arabia

    Science.gov (United States)

    Alhussain, Thamer; Drew, Steve

    The paper discussed an exploratory study of government employees’ perceptions of the introduction of biometric authentication at the workplace in the Kingdom of Saudi Arabia. We suggest that studying the factors affecting employees’ acceptance of new technology will help ease the adoption of biometric technology in other e-government applications. A combination of survey and interviews was used to collect the required data. Interviews were conducted with managers and questionnaires were given to employees from two different government organisations in the Kingdom of Saudi Arabia to investigate the employees’ perceptions of using biometrics. The results of this study indicate a significant digital and cultural gap between the technological awareness of employees and the preferred authentication solutions promoted by management. A lack of trust in technology, its potential for misuse and management motives reflect the managers’ need to consider their responsibilities for narrowing these gaps. It was apparent that overcoming employees’ resistance is an essential issue facing biometric implementation. Based on the research we recommend that an awareness and orientation process about biometrics should take place before the technology is introduced into the organisation.

  4. Radiation survey of mobile and wireless technology masts in public places in Kaduna metropolis Nigeria

    International Nuclear Information System (INIS)

    Onoh, N. I.; Ogbanje, G. O.; Jonah, S. A.

    2014-01-01

    Work was done to measure radiation exposure of the populace in Kaduna metropolis from radiation emitted from global satellite communication masts. Base stations were surveyed in residential, school and office areas. Parameters sampled include the electric field strength, magnetic field strength, power density and ionizing radiation dose rate of the 20 surveyed masts belonging to four service providers. The instruments deployed include the Rf- EMF strength meter Model 480836 used to measure the first three parameters and Radiation Monitor Radex RD 1503 used to determine the forth parameter. The result obtained in this work was compared with the limits set by international regulatory bodies. Our result shows that electromagnetic and ionizing radiation exposures from the surveyed masts are far below the standard limits. Based on this, the population in Kaduna metropolis is not subjected to any adverse health effects from the Global System of Mobile Communication/Universal Mobile Telecommunication System masts at the moment.

  5. A Comprehensive Survey of Emerging Technologies for the New York Metropolitan Area

    Science.gov (United States)

    2008-11-01

    The increasing challenges in managing and operating transportation systems have behooved transportation agencies to consider innovative alternative technology solutions to improve transportation system performance. The goal of this project is to cond...

  6. A Survey of Mobile and Wireless Technologies for Augmented Reality Systems (Preprint)

    Science.gov (United States)

    2008-02-01

    main system consists of four subsystems called Engines: three rendering engines for visual, audio and special effects multimodal simulation and a...and display technology available. The key technologies used in this MR system are Open Scene Graph and Cal3D for graphics, Port Audio for sound, and...Reality, Visualisation and Interaction in Africa, Cape Town, Feb. 3-5, 2003 [48] Rauhala, M., Gunnarsson, A., Henrysson, A., Ynnerman, A., "A Novel

  7. Survey into basics, concepts, applications, security and simulation of DHT and applications based on DHT technologies

    OpenAIRE

    Aaltonen, Petri

    2017-01-01

    Distributed architectures have emerged as a significant area of computing affecting the consumer domain more and more. Distributed data transfer has proven to be a suitable and convenient technology for efficiently transferring files across multiple peers interested in obtaining an identical copy of the same data – for example entertainment or a block of application data. Current technology when discussing decentralized distributed systems are based on the Distributed Hash Table structures. F...

  8. Baby Boomers’ Adoption of Consumer Health Technologies: Survey on Readiness and Barriers

    OpenAIRE

    LeRouge, Cynthia; Van Slyke, Craig; Seale, Deborah; Wright, Kevin

    2014-01-01

    Background As they age, baby boomers (born 1946-1964) will have increasing medical needs and are likely to place large demand on health care resources. Consumer health technologies may help stem rising health care needs and costs by improving provider-to-patient communication, health monitoring, and information access and enabling self-care. Research has not explored the degree to which baby boomers are ready for, or are currently embracing, specific consumer health technologies This study ex...

  9. Survey on the Technology Readiness Level of R and D projects for a Technical Risk Management

    International Nuclear Information System (INIS)

    Song, S. J.; Chang, J.; Lee, K. Y.

    2008-01-01

    The purpose of applying the Technology Readiness Level/Design Readiness Level (TRL/DRL) in technical risk management is to make technology assessments, and improve communication among researchers with a consistent, systematic technology readiness Technical risk management for the Nuclear Hydrogen Production project was adopted of experience assessed with Delphi Method from the Next Generation Nuclear Plant(NGNP)of the DOE to improve the poor contactor management of the major projects which experienced cost increases and/or schedule delays in long-term. In the current phase that is doing key technology research and development projects, the technology readiness level was reviewed and applied to the Nuclear Hydrogen Production project to prepare an input for the next design phases. Based on the previous works, pre-conceptional design and key R and D works for the Nuclear Hydrogen Design and Development(NHDD) projects and the results of key research and development projects, the TRL was applied to assess the levels and compared with the advanced design stages of Westinghouse Electric Co. With this process, several issues were identified to apply the design and technology level to the familiar steps of design process and research and development projects. In order to resolve these issues, it is needed to systematically adjust and modify the current process with TRLs

  10. An aerial radiological survey of the EG ampersand G Mound Applied Technologies and surrounding area, Miamisburg, Ohio

    International Nuclear Information System (INIS)

    1992-11-01

    An aerial radiological survey was conducted over EG ampersand G Mound Applied Technologies, Miamisburg, Ohio, during the period of June 9--24, 1989. The purpose of the 41-square-kilometer (16-square-mile) survey was to document the terrestrial gamma environment of the plant and surrounding area. In addition, ground-based exposure rate measurements and soil samples were obtained to support the aerial data. An exposure rate contour map at 1 meter above ground level was.constructed from the gamma data and overlaid on an aerial photograph and map of the area. Exposure rates measured in the area typically ranged from 9 to 11 microroentgens per hour (μR/h)

  11. Learning, technology and intellectual property: a survey of the philosophies and preferences of our trainees and peers.

    Science.gov (United States)

    Bedoya, Maria A; Back, Susan J; Scanlon, Mary H; Delgado, Jorge; Darge, Kassa; Reid, Janet R

    2016-12-01

    Increasing workloads threaten the quality of teaching in academic radiology practices. There is a wealth of unfiltered educational resources for radiology on the internet. As a digital native, today's radiology trainee may have differing opinions from teachers about learning and intellectual property. To identify the preferences and philosophies regarding learning, technology and intellectual property toward the future development of an innovative radiology curriculum. An electronic survey with 22 questions was sent to 2,010 members of the Society for Pediatric Radiology and 100 radiology trainees. Three hundred sixty-one of the 2,110 surveys were returned. All questions were completed in 342 surveys. Fifty-three respondents were trainees (residents and fellows) and 289 respondents were radiologists (teachers). Time needed for a single learning activity in both groups is learning environments were point-of-care and outside work hours for both groups. Ideal lecture durations were 31-45 min for trainees and 21-30 min for teachers (P=0.001). Adoption of new technology showed late majority and laggard trends for both groups (P=0.296). Interest in gadgets was greater in trainees (17%) than teachers (2%) (Peducational materials (P=0.028); 27% versus 13%, respectively, disagreed with dissemination of those materials beyond the institution (P=0.013). While millennial trainees are adult learners with a stronger comfort with technology, learning styles of trainees and teachers are more similar than was previously believed. Trainees and teachers hold conflicting philosophies about intellectual property. Results herein speak favorably for revising our teaching portfolio to include practical learning materials of short duration available at point-of-care.

  12. Technology survey of computer software as applicable to the MIUS project

    Science.gov (United States)

    Fulbright, B. E.

    1975-01-01

    Existing computer software, available from either governmental or private sources, applicable to modular integrated utility system program simulation is surveyed. Several programs and subprograms are described to provide a consolidated reference, and a bibliography is included. The report covers the two broad areas of design simulation and system simulation.

  13. Comparing Two Survey Research Approaches: E-Mail and Web-Based Technology versus Traditional Mail.

    Science.gov (United States)

    Howes, Colleen M.; Mailloux, Mark R.

    2001-01-01

    Contrasted two survey methodologies: e-mail-Web and traditional mail. Found that: (1) e-mail-Web respondents were proportionately more likely to be male and enrolled in school full-time; (2) more individual question non-response was present for the e-mail-Web sample; and (3) e-mail-Web respondents value different aspects of graduate school. (EV)

  14. A National Survey of School Counselor Supervision Practices: Administrative, Clinical, Peer, and Technology Mediated Supervision

    Science.gov (United States)

    Perera-Diltz, Dilani M.; Mason, Kimberly L.

    2012-01-01

    Supervision is vital for personal and professional development of counselors. Practicing school counselors (n = 1557) across the nation were surveyed to explore current supervision practices. Results indicated that 41.1% of school counselors provide supervision. Although 89% receive some type of supervision, only 10.3% of school counselors receive…

  15. Report on a survey in fiscal 1999. Survey on movements in technologies related to climate change; 1999 nendo kiko hendo ni kansuru gijutsu doko chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Working group 3 of the Intergovernmental Panel on Climate Change (IPCC) is now conducting technological and socio-economical assessments of climate change mitigation measures. The objectives of this research are, in conjunction with the IPCC activities, to perform investigation on the draft of the Third Assessment Report and the related literatures, and survey and study movements in technologies for climate change mitigation measures by performing investigations and researches by using models as required. Chapter 1 generalizes the activities of IPCC since 1988, and describes the preparation schedule for the third assessment report being worked on, as well as the summary movements thereof and the features of the third assessment report. Chapter 2 states the history of the activities. Chapter 3 describes that the third assessment report (draft) being prepared by the Working Group 3 is composed as a whole of the options of implementation, the theoretical background of the implementation, the international institutions, and the evaluation on the implementation. It generalizes the first order draft (FOD). Chapter 4 states the results of investigations on the points of issue which were regarded as the problems in the process of preparing the FOD. Chapter 5 describes the investigations of the FOD, making various important keywords as the axis of the investigations. (NEDO)

  16. Report on a survey in fiscal 1999. Survey on movements in technologies related to phytoremediation; 1999 nendo phytoremediation ni kansuru gijutsu doko chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    This survey is intended to discuss the status quo in movements of technologies related to phytoremediation (PM) that utilizes metabolic functions of plants, the overseas situation thereof where the PM application has advanced, and the future technological problems. The PM can be divided largely into the following four categories according to the actions of plants: 1) phyto-extraction - absorbs substances dissolved in water directly or through actions of leguminous bacteria to purify the water or soil; 2) phyto-transformation - action to absorb polluting substances into plant bodies and decompose them; 3) phyto-stimulation - rhizospheric microorganisms are activated by enzymes secreted from roots to decompose chemical substances; and 4) phyto-stabilization - actions to fix or stabilize polluting chemical substances by actions of substances secreted from plants and/or leguminous bacteria in soil and interactions with soil particles. Japan's independent researches have derived such researches as a research to utilize street lining trees to purify polluted air, a research to realize purification of hard-to-degrade substances by introducing degradable genes of microorganisms, and a research intended to create plants that accumulate in them heavy metals densely. (NEDO)

  17. Report on a survey in fiscal 1999. Survey on movements in technologies related to phytoremediation; 1999 nendo phytoremediation ni kansuru gijutsu doko chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    This survey is intended to discuss the status quo in movements of technologies related to phytoremediation (PM) that utilizes metabolic functions of plants, the overseas situation thereof where the PM application has advanced, and the future technological problems. The PM can be divided largely into the following four categories according to the actions of plants: 1) phyto-extraction - absorbs substances dissolved in water directly or through actions of leguminous bacteria to purify the water or soil; 2) phyto-transformation - action to absorb polluting substances into plant bodies and decompose them; 3) phyto-stimulation - rhizospheric microorganisms are activated by enzymes secreted from roots to decompose chemical substances; and 4) phyto-stabilization - actions to fix or stabilize polluting chemical substances by actions of substances secreted from plants and/or leguminous bacteria in soil and interactions with soil particles. Japan's independent researches have derived such researches as a research to utilize street lining trees to purify polluted air, a research to realize purification of hard-to-degrade substances by introducing degradable genes of microorganisms, and a research intended to create plants that accumulate in them heavy metals densely. (NEDO)

  18. [The historical meaning of serological surveys as a laboratory technology applied to the immunization campaigns. The case of poliomyelitis in Spain].

    Science.gov (United States)

    Ballester, Rosa; Porras, María-Isabel

    2009-01-01

    The aim of the paper is to analyse the introduction, use and diffusion of the serological surveys, a public health technology on the borderline between epidemiology and laboratory, in connection with poliomyelitis in Spain during the Francoism period. Within the framework of the "new history" of medical technologies and innovations, the serological surveys played an important role both in the improvement of knowledge on socio-demographic distribution and the health politics arena.

  19. Survey of the situation of technology succession. Databases of articles including in industrial technology museums; Gijutsu keisho jokyo chosa. Sangyo gijutsu hakubutsukan shuzohin D.B. hen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    To promote the succession of history of and the creative use of industrial science technologies, the paper made lists and databases of the articles of industrial technology museums and material halls in Japan. Record/preservation and collection/systematization of history of the industrial technology is useful for forming bases necessary for promotion of future research/development and international contribution. Museums and material halls are the fields for making comprehensive and practical activities. The data were made as one of the basic databases as the first step for promoting activities for examining the technical succession situation in a long term range continuously and systematically. In the classification of the data, the energy relation was divided into electric power, nuclear power, oil, coal, gas and energy in general. Others were classified into metal/mine, electricity/electronics/communication, chemistry/food, ship building/heavy machinery, printing/precision instrument, and textile/spinning. Moreover, the traffic relation was classified into railroad, automobiles/two-wheeled vehicles, airline/space, and ships. Items were also set of life relation, civil engineering/architecture, and general. The total number of the museums for the survey reached 208.

  20. Research report of fiscal 1997. Survey on information networks for environment technology transfer; 1997 nendo hokokusho. Kankyo gijutsu iten joho network chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    ICETT is one of the member organizations of APEC environment technology virtual center which established in Osaka in 1996 for active environment technology exchange between APEC countries based on a survey result obtained in fiscal 1995. ICETT began its information service in April, 1997, and completed useful prototype home pages which include the database composed of practical useful information on environment preservation technology of domestic factories and offices, and training information and local governments` approach cases to pollution control. In fiscal 1997, further survey was made, and the simulation software of a model process was also developed for training. Clean technology and energy saving technology strongly demanded by developing countries were surveyed to prepare a database including useful information for developing countries. A basic design software for bio-treatment of waste water was also prepared. The total number of home page accesses exceeded a predicted number for the first half year. 5 refs., 25 figs.

  1. Development of laparoscopic surgery and training facilities in Europe: Results of a survey of the European Society of Uro-Technology (ESUT)

    NARCIS (Netherlands)

    Laguna, M. P.; Schreuders, L. C.; Rassweiler, J. J.; Abbou, C. C.; van Velthoven, R.; Janetschek, G.; Breda, G.; de la Rosette, J. J. M. C. H.

    2005-01-01

    Objective: The European Society of Uro-Technology (ESUT) conducted a survey in order to assess the application of laparoscopy and the facilitation of training programs within Europe. Methods: A total of 430 urologists and residents from European countries answered the ESUT survey during the XVIIIth

  2. The Leadership Role of the Teacher Librarian in Technology Integration: Early Results of a Survey of Highly Certified Teacher Librarians in the United States

    Science.gov (United States)

    Everhart, Nancy; Mardis, Marcia A.; Johnston, Melissa

    2010-01-01

    In 2008, the United States' Institute for Museum and Library Services funded Project Leadership-in-Action (LIA) that included surveys of the technology integration practices of teacher librarian leaders with National Board Certification. Preliminary 2009 survey results suggested that the 295 respondents worked in well-resourced libraries with…

  3. Magnetic fusion energy technology fellowship: Report on survey of institutional coordinators

    International Nuclear Information System (INIS)

    1993-02-01

    In 1980, the Magnetic Fusion Energy Technology (MFET) Fellowship program was established by the US Department of Energy, Office of Fusion Energy, to encourage outstanding students interested in fusion energy technology to continue their education at a qualified graduate school. The basic objective of the MFET Fellowship program is to ensure an adequate supply of scientists in this field by supporting graduate study, training, and research in magnetic fusion energy technology. The program also supports the broader objective of advancing fusion toward the realization of commercially viable energy systems through the research by MFET fellows. The MFET Fellowship program is administered by the Science/Engineering Education Division of Oak Ridge Institute for Science and Education. Guidance for program administration is provided by an academic advisory committee

  4. Priority survey between indicators and analytic hierarchy process analysis for green chemistry technology assessment.

    Science.gov (United States)

    Kim, Sungjune; Hong, Seokpyo; Ahn, Kilsoo; Gong, Sungyong

    2015-01-01

    This study presents the indicators and proxy variables for the quantitative assessment of green chemistry technologies and evaluates the relative importance of each assessment element by consulting experts from the fields of ecology, chemistry, safety, and public health. The results collected were subjected to an analytic hierarchy process to obtain the weights of the indicators and the proxy variables. These weights may prove useful in avoiding having to resort to qualitative means in absence of weights between indicators when integrating the results of quantitative assessment by indicator. This study points to the limitations of current quantitative assessment techniques for green chemistry technologies and seeks to present the future direction for quantitative assessment of green chemistry technologies.

  5. Report on survey in fiscal 2000 on the survey on succession of history of industrial technologies. Survey edition of industrial technologies in Japan that have contributed largely to development of industries; 2000 nendo sangyo gijutsu rekishi keisho chosa hokokusho. Sangyo no hatten ni okiku kiyoshita kokunai sangyo gijutsu no chosahen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Surveys and researches have been performed to serve as reference for the future research and development policies by clarifying the innovation process of industrial technologies in Japan and the originality and creativity seen in that process. The surveys have focused on processes born in Japan and evaluated as 'world class' in significance of some kind, and summarized the technology history. The current fiscal year has surveyed newly the following nine processes: industrialization of the sodium glutamate and fructose manufacturing technologies, development of solar cell technologies, industrialization of the manufacturing process of cyclohexnol via cyclohexene, development of the MEK manufacturing process, development and industrialization of hollow fiber reverse osmosis membrane modules for single stage sea water desalination, development and industrialization of the new vitamin B1 intermediate process, development of HSG-Si capacitors for semiconductor memories, and development and industrialization of 4-ethylene fluoride/ethylene copolymer (ETFE). The surveys are considered to have obtained the results abound in suggestions toward original and creative technological developments. (NEDO)

  6. A survey on the automatic object tracking technology using video signals

    International Nuclear Information System (INIS)

    Lee, Jae Cheol; Jun, Hyeong Seop; Choi, Yu Rak; Kim, Jae Hee

    2003-01-01

    Recently, automatic identification and tracking of the object are actively studied according to the rapid development of signal processing and vision technology using improved hardware and software. The object tracking technology can be applied to various fields such as road watching of the vehicles, weather satellite, traffic observation, intelligent remote video-conferences and autonomous mobile robots. Object tracking system receives subsequent pictures from the camera and detects motions of the objects in these pictures. In this report, we investigate various object tracking techniques such as brightness change using histogram characteristic, differential image analysis, contour and feature extraction, and try to find proper methods that can be used to mobile robots actually

  7. Portable Diagnostics Technology Assessment for Space Missions. Part 2; Market Survey

    Science.gov (United States)

    Nelson, Emily S.; Chait, Arnon

    2010-01-01

    A mission to Mars of several years duration requires more demanding standards for all onboard instruments than a 6-month mission to the Moon or the International Space Station. In Part 1, we evaluated generic technologies and suitability to NASA needs. This prior work considered crew safety, device maturity and flightworthiness, resource consumption, and medical value. In Part 2, we continue the study by assessing the current marketplace for reliable Point-of-Care diagnostics. The ultimate goal of this project is to provide a set of objective analytical tools to suggest efficient strategies for reaching specific medical targets for any given space mission as program needs, technological development, and scientific understanding evolve.

  8. Correlates of in-person and technology-facilitated sexual harassment from an online survey among young Australians.

    Science.gov (United States)

    Douglass, Caitlin H; Wright, Cassandra J C; Davis, Angela C; Lim, Megan S C

    2018-06-01

    Background: Technology-facilitated sexual harassment is an emerging phenomenon. This study investigates correlates of sexual harassment among young Australians. Methods: Participants aged 15-29 were recruited for an online survey. Participants reported how often in the past year they experienced sexual harassment in person, via phone, social media and dating apps. Correlates of in-person and technology-facilitated sexual harassment were identified using logistic regression. Results: Of all participants (n=1272, 70% female), two-thirds reported sexual harassment in person, 34% through social media and 26% via phone. Of participants who used a dating app in the past year (n=535), 57% experienced sexual harassment. Sexual harassment in person was correlated with being female (aOR=9.2, CI=6.9-12.2), trans and gender diverse (aOR=2.6, CI=1.2-5.7) and being aged 20-24 years (aOR=1.5, CI=1.1-2.1). Heterosexual identity reduced the odds of sexual harassment in person (aOR=0.7, CI=0.5-0.9). Technology-facilitated sexual harassment was correlated with female (aOR=3.5, CI=2.6-4.6) and trans and gender diverse identities (aOR=3.0, CI=1.4-6.5). Older age [25-29 years (aOR=0.5, CI=0.4-0.8)] and heterosexual identity (aOR=0.7, CI=0.5-0.9) significantly reduced the odds of technology-facilitated sexual harassment. Conclusion: Young people identifying as female, trans and gender diverse and non-heterosexual are at risk of in-person and technology-facilitated sexual harassment. Service and technology providers, academics, and policy makers must respond with innovative strategies.

  9. Oxygen-Methane Thruster, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Orion Propulsion, Inc. proposes to develop an Oxygen and Methane RCS Thruster to advance the technology of alternate fuels. A successful Oxygen/CH4 RCS Thruster will...

  10. Application for surveying technology for the alignment of large optical systems

    International Nuclear Information System (INIS)

    Bauke, W.

    1984-01-01

    Precise alignment of optical elements in large optical systems is difficult if many elements are positioned such that direct alignment or boresighting becomes impossible. A practical approach is to identify discrete optical path segments and align these using standard surveying or optical-tooling instrumentation. One simply has to develop an alignment theory in which the alignment optical path duplicates or closely approximates the optical path of the operational device. The surveying instruments can then be used to simulate the optical input beams to the system segments to be aligned. Auxiliary targets and reflectors may be added, and the alignment procedure may be augmented by standard optical test instrumentation and techniques. Examples are given using theodolites, transits, and levels with autocollimating capability and micrometer adaptors to perform boresighting and autocollimation techniques on segments of the optical train of the Antares Laser Fusion System at Los Alamos National Laboratory

  11. Survey data on cost and benefits of climate smart agricultural technologies in western Kenya.

    Science.gov (United States)

    Ng'ang'a, S K; Mwungu, C M; Mwongera, C; Kinyua, I; Notenbaert, A; Girvetz, E

    2018-02-01

    This paper describes data that were collected in three counties of western Kenya, namely Siaya, Bungoma, and Kakamega. The main aim of collecting the data was to assess the climate smartness, profitability and returns of soil protection and rehabilitation measures. The data were collected from 88 households. The households were selected using simple random sampling technique from a primary sampling frame of 180 farm households provided by the ministry of agriculture through the counties agricultural officers. The surveys were administered by trained research assistants using a structured questionnaire that was designed in Census and Survey Processing System (CSPro). Later, the data was exported to STATA version 14.1 for cleaning and management purposes. The data are hosted in an open source dataverse to allow other researchers generate new insights from the data (http://dx.doi.org/10.7910/DVN/K6JQXC).

  12. Technology survey of electrical power generation and distribution for MIUS application

    Science.gov (United States)

    Gill, W. L.; Redding, T. E.

    1975-01-01

    Candidate electrical generation power systems for the modular integrated utility systems (MIUS) program are described. Literature surveys were conducted to cover both conventional and exotic generators. Heat-recovery equipment associated with conventional power systems and supporting equipment are also discussed. Typical ranges of operating conditions and generating efficiencies are described. Power distribution is discussed briefly. Those systems that appear to be applicable to MIUS have been indicated, and the criteria for equipment selection are discussed.

  13. Extracorporeal membrane oxygenation (ECMO)

    African Journals Online (AJOL)

    Extracorporeal membrane oxygenation (ECMO) is not a novel therapy in the true sense of the ... Intention-to-treat analysis showed benefit for ECMO, with a relative risk ... no doubt that VV-ECMO is an advance in medical technology, and that.

  14. Information and Communication Technologies as Agricultural Extension Tools: A Survey among Farmers in West Macedonia, Greece

    Science.gov (United States)

    Anastasios, Michailidis; Koutsouris, Alex; Konstadinos, Mattas

    2010-01-01

    This article critically assesses the potential of information and communication technologies (ICTs) as agricultural extension tools. Specifically, the purpose of the current piece of work is to identify the extent of the use of ICTs on farms, look into farmers' characteristics as related to ICTs' adoption and explore farmers' preferred extension…

  15. A survey of infrared technology for special nuclear materials control and accounting

    International Nuclear Information System (INIS)

    Stanbro, W.D.; Leonard, R.S.; Steverson, C.A.; Angerman, M.I.

    1992-03-01

    This report reviews some aspects of current infrared measurement technology and suggests two applications in which it may be used in nuclear safeguards. These applications include both materials control and materials accounting. In each case, the measurements rely on passive detection of infrared radiation generated from the heat produced by the radioactive decay of plutonium. Both imaging and non-imaging techniques are discussed

  16. Self-Presentation Bias in Surveys of Teachers' Educational Technology Practices

    Science.gov (United States)

    Kopcha, Theodore J.; Sullivan, Howard

    2007-01-01

    This study investigated self-presentation bias in the self-reports of teachers about their practices in six topic areas in educational technology (Instructional Design, Assessment, Learner-Centered Instruction, Curriculum Alignment, Attitudes about Computers, and Use of Computers with Students). Subjects were 50 middle-school teachers. Data were…

  17. Technological Monitoring Applied to Survey-Based on Brazilian Patent Applications about PEMFC

    Directory of Open Access Journals (Sweden)

    Deysimar de Souza Carvalho

    2011-06-01

    Full Text Available The present study aims to show the importance of patents as an instrument of technological innovation and to assess the relevance of technology of PEMFC in Brazil by means of the technological monitoring methodology from 1996 to 2005. This study used different Industrial Property Databases (INPI-BR, ESPACENET and DWPI, in order to retrieve the BR applications in each database. Relevant keywords as “fuel cell” were used in combination with specific IPC (H01M8 in order to assess the main applicants, countries, IPCs and technological innovation over time. In Brazil, the country holding more requests in this area is the United States (US with 53,7% of the patent applications, while Brazil (BR accounts for 4,4% of the total requests. It was also observed that the North-American company, UTC Fuel Cells comes on top of the list and that there were no patent applications of Brazilian origin (BR in other countries.

  18. The Adoption and Use of Health Information Technology in Rural Areas: Results of a National Survey

    Science.gov (United States)

    Singh, Ranjit; Lichter, Michael I.; Danzo, Andrew; Taylor, John; Rosenthal, Thomas

    2012-01-01

    Context: Health information technology (HIT) is a national policy priority. Knowledge about the special needs, if any, of rural health care providers should be taken into account as policy is put into action. Little is known, however, about rural-urban differences in HIT adoption at the national level. Purpose: To conduct the first national…

  19. Adaptation of the Science, Technology, Engineering, and Mathematics Career Interest Survey (STEM-CIS) into Turkish

    Science.gov (United States)

    Koyunlu Unlu, Zeynep; Dokme, Ilbilge; Unlu, Veli

    2016-01-01

    Problem Statement: Science, technology, engineering, and mathematics (STEM) education has recently become a remarkable research topic, especially in developed countries as a result of the skilled workforce required in the fields of the STEM. Considering that professional tendencies are revealed at early ages, determining students' interest in STEM…

  20. A Survey of Mathematics Education Technology Dissertation Scope and Quality: 1968-2009

    Science.gov (United States)

    Ronau, Robert N.; Rakes, Christopher R.; Bush, Sarah B.; Driskell, Shannon O.; Niess, Margaret L.; Pugalee, David K.

    2014-01-01

    We examined 480 dissertations on the use of technology in mathematics education and developed a Quality Framework (QF) that provided structure to consistently define and measure quality. Dissertation studies earned an average of 64.4% of the possible quality points across all methodology types, compared to studies in journals that averaged 47.2%.…

  1. General wisdom concerning the factors affecting the adoption of cleaner technologies: a survey 1990-2007

    NARCIS (Netherlands)

    Montalvo Corral, C.

    2008-01-01

    Cleaner technologies (CT) have recently received much attention in diverse media and policy agendas. This comes out of the clear role they play in environmental protection and sustainability and the large potential to contribute to economic growth and competitiveness. The realization of both

  2. Leadership Style and Learning Organization: A Survey of Information Technology Professionals

    Science.gov (United States)

    Stewart, Jeffrey E.

    2013-01-01

    Leadership in information technology (IT) firms remains a topic for study. Understanding how IT professionals react to leadership styles creates an opportunity for IT leaders to better lead by matching expectation to leadership style. Previous research has linked transformation leadership to the learning organization in the pharmaceutical sector,…

  3. A survey on 5G networks for the Internet of Things: communication technologies and challenges

    CSIR Research Space (South Africa)

    Alpakwu, GA

    2017-12-01

    Full Text Available The Internet of Things (IoT) is a promising technology which tends to revolutionize and connect the global world via heterogeneous smart devices through seamless connectivity. The current demand for machine-type communications (MTC) has resulted...

  4. A Survey of Recent Advances in Optical and Multimedia Information Technologies.

    Science.gov (United States)

    Jessop, Deborah

    1997-01-01

    Examines developments in multimedia technologies and in the World Wide Web. Discusses CD-recordable, CD-rewritable, cable modems, personal digital assistants, digital video discs, interactivity and virtual worlds, advertising on the Web, and Intranets and CD-ROM networks. Eight tables and figures show costs, download time, estimated sales, storage…

  5. The Supervision of Information Technology Classrooms in Turkey: A Nationwide Survey

    Science.gov (United States)

    Memisoglu, Salih Pasa

    2007-01-01

    The purpose of this study was to identify how primary school supervisors carry out their roles concerning information and communications technology (ICT) based classrooms in public primary schools in Turkey. Data were collected via a questionnaire from 583 primary school supervisors working in 17 different provinces. Statistical programs were used…

  6. Fiscal 1997 technological survey report. Engineer exchange project - coal mine technological field (Advanced coal producing country survey - U.S.A. survey); 1997 nendo gijutsusha koryu jigyo (tanko gijutsu bun'ya) senshin santankoku chosa. Beikoku chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    While the introduction and adaptation of the Longwall excavation technology were carried forward for coal producing countries in the Pacific region, U.S.A. information was collected by making tours of coal mines in the West and Washington/Colorado/Utah States, with the intention of ascertaining technological trend so as to carry out efficient technological transfer, and for the purpose of replenishing the contents and contributing to the smooth implementation of the engineer exchange project in 'coal mine technological field'. The coal reserves are 400 billion tons, with 840 million tons produced and with 80 million tons exported; not less than 56% of the U.S. domestic electricity rests on coal. Production by open-pit mining is the majority while the output by underground mining is 38%; the Longwall method has increased as a digging method, taking 18% of all digging output. The productivity is 4.24 ton/person per day and ranks as the world highest. The coal mining technological trend in the U.S. can be summarized as follows. The coal mining output in the West is increasing, with the number of mines decreasing, so that the output per mine is increasing. With the output ratio by open-pit mining increasing, the digging method in the mine is being changed to the Longwall. (NEDO)

  7. Embryo transfer practices in the United States: a survey of clinics registered with the Society for Assisted Reproductive Technology.

    Science.gov (United States)

    Jungheim, Emily S; Ryan, Ginny L; Levens, Eric D; Cunningham, Alexandra F; Macones, George A; Carson, Kenneth R; Beltsos, Angeline N; Odem, Randall R

    2010-09-01

    To gain a better understanding of factors influencing clinicians' embryo transfer practices. Cross-sectional survey. Web-based survey conducted in December 2008 of individuals practicing IVF in centers registered with the Society for Assisted Reproductive Technology (SART). None. None. Prevalence of clinicians reporting following embryo transfer guidelines recommended by the American Society for Reproductive Medicine (ASRM), prevalence among these clinicians to deviate from ASRM guidelines in commonly encountered clinical scenarios, and practice patterns related to single embryo transfer. Six percent of respondents reported following their own, independent guidelines for the number of embryos to transfer after IVF. Of the 94% of respondents who reported routinely following ASRM embryo transfer guidelines, 52% would deviate from these guidelines for patient request, 51% for cycles involving the transfer of frozen embryos, and 70% for patients with previously failed IVF cycles. All respondents reported routinely discussing the risks of multiple gestations associated with standard embryo transfer practices, whereas only 34% reported routinely discussing single embryo transfer with all patients. Although the majority of clinicians responding to our survey reported following ASRM embryo transfer guidelines, at least half would deviate from these guidelines in a number of different situations. Copyright (c) 2010 American Society for Reproductive Medicine. All rights reserved.

  8. Public acceptance of CO2 capture and storage technology : a survey of public opinion to explore influential factors

    International Nuclear Information System (INIS)

    Itaoka, K.; Saito, A.; Akai, M.

    2005-01-01

    A potentially effective tool in managing carbon emissions is carbon capture and storage technology (CCS). However, its effectiveness depends on its acceptability by the public, and very little is known about how willing the general public will accept various options of CCS. This paper presented the results of a study that assessed general perceptions of various forms of CCS and identified various factors that influence public acceptance of CCS. Two versions of a survey were administered and conducted in Tokyo and Sapporo, Japan in December 2003. The paper discussed the design of the questionnaire as well as the administration of the survey. One version of the survey provided limited education about CCS, while another version, provided more extensive information about CCS. The data analysis methodology was also described with reference to factor analysis, comparisons of means and rank order distributions, and multiple regression. Last, the study findings and results were presented. The findings suggest that the general public was supportive of CCS as part of a larger national climate policy, although it was opposed to the implementation of specific CCS options involving deep-sea dilution option of ocean storage, lake type option of ocean storage, onshore option of geological storage, and offshore option of geological storage. In addition, it was found that education about CCS affected public acceptance. The more information respondents obtained about CCS, the more likely they were to be supportive of those storage options, except for onshore option of geological storage. 4 refs., 3 tabs

  9. Accuracy of self-reported survey data on assisted reproductive technology treatment parameters and reproductive history.

    Science.gov (United States)

    Stern, Judy E; McLain, Alexander C; Buck Louis, Germaine M; Luke, Barbara; Yeung, Edwina H

    2016-08-01

    It is unknown whether data obtained from maternal self-report for assisted reproductive technology treatment parameters and reproductive history are accurate for use in research studies. We evaluated the accuracy of self-reported in assisted reproductive technology treatment and reproductive history from the Upstate KIDS study in comparison with clinical data reported to the Society for Assisted Reproductive Technology Clinic Outcome Reporting System. Upstate KIDS maternal questionnaire data from deliveries between 2008 and 2010 were linked to data reported to Society for Assisted Reproductive Technology Clinic Outcome Reporting System. The 617 index deliveries were compared as to treatment type (frozen embryo transfer and donor egg or sperm) and use of intracytoplasmic sperm injection and assisted hatching. Use of injectable medications, self-report for assisted reproductive technology, or frozen embryo transfer prior to the index deliveries were also compared. We report agreement in which both sources had yes or both no and sensitivity of maternal report using Society for Assisted Reproductive Technology Clinic Outcome Reporting System as the gold standard. Significance was determined using χ(2) at P < 0.05. Universal agreement was not reached on any parameter but was best for treatment type of frozen embryo transfer (agreement, 96%; sensitivity, 93%) and use of donor eggs (agreement, 97%; sensitivity, 82%) or sperm (agreement, 98%; sensitivity, 82%). Use of intracytoplasmic sperm injection (agreement, 78%: sensitivity, 78%) and assisted hatching (agreement, 57%; sensitivity, 38%) agreed less well with self-reported use (P < .0001). In vitro fertilization (agreement, 82%) and frozen embryo transfer (agreement, 90%) prior to the index delivery were more consistently reported than was use of injectable medication (agreement, 76%) (P < .0001). Women accurately report in vitro fertilization treatment but are less accurate about procedures handled in the

  10. National French survey on tele-transmission of EEG recordings: More than a simple technological challenge.

    Science.gov (United States)

    Sauleau, Paul; Despatin, Jane; Cheng, Xufei; Lemesle, Martine; Touzery-de Villepin, Anne; N'Guyen The Tich, Sylvie; Kubis, Nathalie

    2016-04-01

    Assessment of current practice and the need for tele-transmission and remote interpretation of EEG in France. Transmission of EEG to a distant center could be a promising solution to the problem of decreasing availability of neurophysiologists for EEG interpretation, in order to provide equity within health care services in France. This practice should logically follow the legal framework of telemedicine and the recommendations that were recently edited by the Société de neurophysiologie clinique de langue française (SNCLF) and the Ligue française contre l'épilepsie (LCFE). A national survey was designed and performed under the auspices of the SNCLF. This survey reveals that there is an important gap between the official recommendations and the "reality on the ground". These local organizations were mainly established through the impulse of individual initiatives, rarely driven by health regulatory authorities and sometimes far from legal frameworks. For the majority, they result from a need to improve medical care, especially in pediatrics and neonatology, and to ensure continuity of care. When present, tele-transmission of EEG is often only partially satisfactory, since many technical procedures have to be improved. Conversely, the lack of tele-transmission of EEG would penalize medical care for some patients. The survey shows both the wealth of local initiatives and the fragility of most existing networks, emphasizing the need for better cooperation between regulatory authorities and health care professionals to establish or improve the transmission of EEG in France. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

  11. The survey of American college students computer technology preferences & purchasing plans

    CERN Document Server

    2009-01-01

    This report presents data from a survey of more than 400 American college students.  The report presents data on student computer ownership of both PCs and laptops, purchasing plans for PCs and laptops, as well as purchasing plans for cell phones and digital cameras.  The report also provides details on how student finance their computer purchases, how much money comes from parents or guardians, and how much from the student themselves, or from their parties.  In addition to data on PCs the report provides detailed info on use of popular word processing packages such as Word, WordPerfect and Open Office.

  12. Intuitive risk perception: research results of attitude surveys toward risk and technology

    International Nuclear Information System (INIS)

    Renn, O.; Peters, H.P.

    1982-01-01

    Using the instruments of the empirical social sciences, a cross-section study was conducted comprising experiments on qualitative risk characteristics, in-depth interviews on mechanisms of risk perception and representative surveys of the public on technical risk sources, in particular with regard to nuclear energy. The results of these studies show that person-related expectations in respect of risk consequences, the possibility of personal influencing control, the severity of risk consequences and one's own risk propensity play a significant role in the evaluation of risks

  13. Science and Technology for Communication and Persuasion Aboard: Gap Analysis and Survey. Revision

    Science.gov (United States)

    2012-03-01

    in the West—which, some argue, biases the field toward individualist rather than collectivist motives for action. Although the U.S. government has...campaigns. It might be worthwhile to invest in research on the persuasiveness of so- called serious games, particularly for non-Western cultures , and to...text-based environments. ’ Rilla Khaled, " Culturally -Relevant Persuasive Technology" (Dissertation, Victoria University of Wellington, 2008), 11

  14. Increasing the Mobility of Dismounted Marines. Small Unit Mobility Enhancement Technologies: Unmanned Ground Vehicles Market Survey

    Science.gov (United States)

    2009-10-01

    DARPA) Legged Squad Support System (LS3) Program. DARPA’s LS3 Program is an effort to develop a walking platform, preferably a quadruped, which...top-scoring UGV’s are track- or wheel-based; only the BigDog is a leg -based system. This presented BigDog with certain advantages (particularly...Technologies, Inc.’s ( DTI ) first location in Ranlo, North Carolina) – is a system capable of wheeled or tracked locomotion and was recently

  15. 区块链隐私保护研究综述%Survey on Privacy Preserving Techniques for Blockchain Technology

    Institute of Scientific and Technical Information of China (English)

    祝烈煌; 高峰; 沈蒙; 李艳东; 郑宝昆; 毛洪亮; 吴震

    2017-01-01

    Core features of the blockchain technology are "de-centralization" and "de-trusting" .As a distributed ledger technology ,smart contract infrastructure platform and novel distributed computing paradigm ,it can effectively build programmable currency ,programmable finance and programmable society ,which will have a far-reaching impact on the financial and other fields ,and drive a new round of technological change and application change .While blockchain technology can improve efficiency , reduce costs and enhance data security ,it is still in the face of serious privacy issues which have been widely concerned by researchers . The survey first analyzes the technical characteristics of the blockchain ,defines the concept of identity privacy and transaction privacy ,points out the advantages and disadvantages of blockchain technology in privacy protection and introduces the attack methods in existing researches ,such as transaction tracing technology and account clustering technology .And then we introduce a variety of privacy mechanisms ,including malicious nodes detection and restricting access technology for the network layer ,transaction mixing technology ,encryption technology and limited release technology for the transaction layer , and some defense mechanisms for blockchain applications layer .In the end ,we discuss the limitations of the existing technologies and envision future directions on this topic .In addition ,the regulatory approach to malicious use of blockchain technology is discussed .%区块链技术的核心特征是"去中心化"和"去信任化",作为分布式总账技术、智能合约基础平台、分布式新型计算范式,可以有效构建可编程货币、可编程金融和可编程社会,势必将对金融及其他领域带来深远影响,并驱动新一轮技术变革和应用变革.但是区块链技术在提高效率、降低成本、提高数据安全性的同时,也面临严重的隐私泄露问题,得到研究者的广泛关

  16. How IMS Enables Converged Services for Cable and 3G Technologies: A Survey

    Directory of Open Access Journals (Sweden)

    Mani Mehdi

    2008-01-01

    Full Text Available The IP multimedia subsystem (IMS is a service control overlay standardized by the 3GPP. The IMS is based on session initiation protocol (SIP to establish, modify, and terminate the sessions. It provides a clean separation between services, signaling, and media with the potential to enable control and management of services over multiple transport technologies. In the scope of fixed-mobile convergence, this paper is dedicated to presenting a review of how cable networks can be integrated into IMS technology to achieve 3G-cable horizontal convergence. Cable networks, as one of the major fixed broadband access technologies with PacketCable architecture, are able to provide broadband internet access and VoIP in addition to cable TV. In this article, we review the evolution in PacketCable architecture to take up IMS. In this way, we consider the standardization and research activities to address this integration. We review some important challenges such as SIP protocol compatibility, defining unique user profile, required enhancement in authentication process, QoS and charging system.

  17. How IMS Enables Converged Services for Cable and 3G Technologies: A Survey

    Directory of Open Access Journals (Sweden)

    Noël Crespi

    2008-04-01

    Full Text Available The IP multimedia subsystem (IMS is a service control overlay standardized by the 3GPP. The IMS is based on session initiation protocol (SIP to establish, modify, and terminate the sessions. It provides a clean separation between services, signaling, and media with the potential to enable control and management of services over multiple transport technologies. In the scope of fixed-mobile convergence, this paper is dedicated to presenting a review of how cable networks can be integrated into IMS technology to achieve 3G-cable horizontal convergence. Cable networks, as one of the major fixed broadband access technologies with PacketCable architecture, are able to provide broadband internet access and VoIP in addition to cable TV. In this article, we review the evolution in PacketCable architecture to take up IMS. In this way, we consider the standardization and research activities to address this integration. We review some important challenges such as SIP protocol compatibility, defining unique user profile, required enhancement in authentication process, QoS and charging system.

  18. Sustainability assessment of energy technologies via social indicators: Results of a survey among European energy experts

    International Nuclear Information System (INIS)

    Gallego Carrera, Diana; Mack, Alexander

    2010-01-01

    Sustainability assessment of energy technologies oftentimes fails to account for social repercussions and long-term negative effects and benefits of energy systems. As part of the NEEDS project, an expert-based set of social indicators was developed and verified by the European stakeholders with the objective of contributing in the development of social indicators for the assessment of societal effects of energy systems. For this purpose, scientific experts from four sample countries France, Germany, Italy and Switzerland were interviewed to assess 16 different energy systems on a specific stakeholder reviewed indicator set. The indicator set covers the four main criteria: 'security and reliability of energy provision; 'political stability and legitimacy'; 'social and individual risks' and 'quality of life'. This article will review the process of indicator development and assessment and highlight results for today's most prominent and future energy technologies and some likely to make an impact in the future. Expert judgments varied considerably between countries and energy systems, with the exception of renewable technologies, which were overall positively assessed on almost all evaluation criteria.

  19. Report on surveys in fiscal 2000 on the survey on preparing list of names of well-informed persons in industrial technological fields; 2000 nendo sangyo gijutsu bun'ya ni okeru yushikisha meibo sakutei ni kakawaru chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    In order to identify, in establishing plans for industrial technological fields, the well-informed persons from whom useful knowledge and comments can be obtained, a well-informed person survey was conducted by surveying and hearing the roles and selection processes of the well-informed persons inside and outside the country. For the organizations in Japan, the survey was made on Japan Society for the Promotion of Science, and Japan Science Technology Organization. For the organizations outside the country, surveys were made on two organizations in the U.S., one organization in Germany, and one organization in U.K. All of them are the research aiding organizations established to allocate the national budget to the research investments. As compared to Japan, the organizations in foreign countries are characterized as follows: technological fields that are given priority are declared clearly by the organizations; in selecting the publicly advertised projects, the guidelines on the research scope are strict, but flexibility is given in fund allocation; the first screening process is carried out by researchers and scholars in the same technological field, and the second screening is performed by the authorization committee. Extraction of well-informed persons and preparation of a name list were performed for some of the technological fields in Japan by means of the hearing survey. (NEDO)

  20. Exploring the Use of information and communication technologies and social networks among university nursing faculty staff. An opinion survey

    Directory of Open Access Journals (Sweden)

    José Luis Fernández-Alemán

    2014-12-01

    Full Text Available Objective. This work sought to analyze the use of Information and Communication Technologies (ICTs and social networks among the university nursing faculty staff in Spain. Methodology. This was a descriptive, cross-sectional study using a questionnaire on ICT skills designed to comply with the research objective, which was evaluated by experts and which was subjected to exploratory analysis of principal components; the reliability of this instrument measured with Cronbach's alpha was 0.85. The information technology tool used to publish the questionnaire on line was Limesurvey. The sample comprised 165 professors from 25 Nursing Faculties and Schools from universities in Spain. Results. Seventy one percent of the total surveyed used internet services to look for information, 63% used the internet as a means for formation and learning, and 72% used it as a communication platform (e-mail and virtual platforms like Sakai and Moodle. Although 51% of the teaching staff surveyed had more than 120 students registered in their courses, hypothesis testing revealed that the number of students in class is not a determining factor for the teaching staff to have greater interest to update its knowledge in ICTs. Younger professors use new technologies more profusely and the most-valued advantage of using ICTs was quick access to information. Professors perceive that after the Bologna Declaration, which requires modifying their teaching-learning processes through the new teaching methodologies, a drop has been produced in their performance and that of their peers in their area of knowledge. Conclusion. The nursing teaching staff is making strong efforts to confront the new challenges posed by ICTs to train the professionals of the 21st century. It is fundamental to pay special attention to improving the university teaching staff's skills in managing ICTs, promoting the implementation of the knowledge acquired.

  1. Exploring the Use of information and communication technologies and social networks among university nursing faculty staff. An opinion survey.

    Science.gov (United States)

    Fernández-Alemán, José Luis; Sánchez García, Ana Belén; López Montesinos, María José; Marqués-Sánchez, Pilar; Bayón Darkistade, Enrique; Pérez Rivera, Francisco Javier

    2014-01-01

    This work sought to analyze the use of Information and Communication Technologies (ICTs) and social networks among the university nursing faculty staff in Spain. This was a descriptive, cross-sectional study using a questionnaire on ICT skills designed to comply with the research objective, which was evaluated by experts and which was subjected to exploratory analysis of principal components; the reliability of this instrument measured with Cronbach's alpha was 0.85. The information technology tool used to publish the questionnaire on line was Limesurvey. The sample comprised 165 professors from 25 Nursing Faculties and Schools from universities in Spain. Seventy one percent of the total surveyed used internet services to look for information, 63% used the internet as a means for formation and learning, and 72% used it as a communication platform (e-mail and virtual platforms like Sakai and Moodle). Although 51% of the teaching staff surveyed had more than 120 students registered in their courses, hypothesis testing revealed that the number of students in class is not a determining factor for the teaching staff to have greater interest to update its knowledge in ICTs. Younger professors use new technologies more profusely and the most-valued advantage of using ICTs was quick access to information. Professors perceive that after the Bologna Declaration, which requires modifying their teaching-learning processes through the new teaching methodologies, a drop has been produced in their performance and that of their peers in their area of knowledge. The nursing teaching staff is making strong efforts to confront the new challenges posed by ICTs to train the professionals of the 21st century. It is fundamental to pay special attention to improving the university teaching staff's skills in managing ICTs, promoting the implementation of the knowledge acquired.

  2. Powers of detection : technology companies vie to capture leak survey business for natural gas pipelines

    Energy Technology Data Exchange (ETDEWEB)

    Byfield, M.

    2005-09-01

    ITT Industries Inc., Physical Sciences Inc., and LaSen Inc. are 3 American companies leading the way to find more efficient methods for identifying leaks from natural gas pipelines. Edmonton-based Synodon Inc. has recently joined the leaders with its newly developed and more sensitive equipment that it hopes to have on the market by the summer of 2006. Leak detection technology was first developed in 1993 in response to concerns about the reliability of aging pipeline infrastructure. In addition to safety concerns, there are concerns over global warming. Methane is a potential greenhouse gas and the United states Environmental Protection Agency estimates that 300 billion cubic feet escape into the atmosphere every year from pipeline leaks. The 2002 Pipeline Safety Improvement Bill in the United States stipulates that leak inspections must be conducted up to 4 times per year in densely populated areas. Violators face fines as high as $1 million. In response to the pipeline safety bill, Synodon raised private equity financing to commercialize an airborne leak detection technology stemming from Canada's space program. In the United States, leak detection technologies that appear likely to take 5 to 20 years for commercialization have been been financed by the Department of Energy and the Office of Pipeline Safety. This paper summarized 5 leak detection prototypes, including ITT's Airborne Natural Gas Emission LiDAR (ANGEL) system which targets high-pressure, long-distance pipelines in North America, LaSen's Airborne LiDAR Pipeline Inspection System (ALPIS) based on DIAL Technology, and a hand-held remote methane leak detector developed jointly by Physical Sciences Inc. of Massachusetts and Houston-based Heath Consultants Inc. Synodon claims that hand-held detectors are too slow and that LiDAR systems still aren't reliable for detection of leaks much below 500 scf/h. Synodon's realSens technology may be more difficult to develop, but it detects

  3. Report on surveys in fiscal 1999. Foundational survey for establishing strategies for industrial technology (surveys on strategies for establishing priorities and improving intellectual foundation); 1999 nendo sangyo gijutsu senryaku sakutei kiban chosa. Jutenka senryaku chiteki kiban seibi chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    With an objective to promote technological developments smoothly, surveys and discussions were given on how the improvements in intellectual foundations are worked out inside and outside the country. In surveying the status of improving the databases inside and outside the country, it was disclosed that the databases both inside and outside the country are arranged under the auspices of the governments. The reason for this is considered because the intellectual foundation improvement is difficult to be established as a business. In order to structure a framework to put together and publicize the data including those possessed by the private sector, surveys and discussions were given on the interest among titles to intellectual properties, contractual relationship between the database improving parties and the data providing parties, relationship with taxation systems, and how the incentives should be provided for publicizing the data. In discussing a model case to utilize data acquired by the private sector, it was concluded that assistance by the governments is indispensable for the organizations for structuring and maintaining the databases to continue their activities independently. Among the data measured and managed at the national level, problems in the publicizing method thereof were discussed especially on the data related to ocean information. (NEDO)

  4. [Satisfaction survey on the use of autologous oocyte vitrification in Assisted Reproductive Technologies].

    Science.gov (United States)

    Boyer, P; Lefebvre, F; Siraudin, C; Montjean, D; Le Coz, P; Gervoise-Boyer, M

    2018-04-02

    We organized a survey for in-vitro fertilization couples who beneficiated on self-preservation of part of the oocyte cohort. The main objective was to measure couples' satisfaction. Secondary objectives were; to identify how patients had been informed; to verify that the use of the ART technique met their expectations, and how they felt about oocyte or embryo freezing. The data were collected by a questionnaire sent electronically to couples who had undergone partial vitrification of the oocyte cohort and at least one warming cycle. The questionnaire consisted of 2 components; one for the women and another one for their husband. Eighty-eight women and 62 men responded to the survey respectively, representing 50.86% and 35.84% of the targeted patients. They were satisfied with a 90% rate, men and women combined. The information we give in the center is heard by couples and is part of the trust in the medical staff. Men are more worried than women about the risks of stimulation or ovarian pick-up and are not displeased to be called upon for sperm recovery for every attempt at oocyte warming. The ambiguity of the answers on the representation of the embryo confirms what is already described, but is independent of the acceptance of freezing whether it is oocyte or embryo. In the same way as evaluating the results, the evaluation of patient satisfaction is useful for the implementation of therapeutic strategies and care pathways. Copyright © 2018 Elsevier Masson SAS. All rights reserved.

  5. Postures of pediatric dentists toward endodontic standards and acceptance of novel technology in Udaipur city: A questionnaire survey

    Directory of Open Access Journals (Sweden)

    Chirag M Raiyani

    2015-01-01

    Full Text Available Background: To ascertain the current clinical practice of pediatric dentists involves utilization of a variety of materials and recent technological advances. Materials and Methods: A total of 218 pediatric dentists (118 males and 100 females were selected for the study those are registered in IDA Udaipur and surveyed using a self-administered questionnaire. Participants were divided into three groups according to their year of experience in the clinical practice. A total of 11 structured questions presented through a pilot study done among the 10% of the total participant′s related to endodontic procedure were used for the study. Frequency and percentage distribution were calculated. Results: The results showed that glass bead sterilization (41.3% was the most commonly used method for sterilization. Isolation during the pulpectomy procedure performed using cotton rolls and suction tip (40.4%. Most of them used hand instruments (58.3% among those; K-file (42.7% was widely used. Radiographic method (53.7% was most common procedure for determination of working length. Single sitting pulpectomy was not commonly preferred. Conclusion:The results of this study indicated that endodontic technology and materials for pulpectomy procedures are slowly being adapted in clinical practice in India. Therefore, pediatric dentist should update their knowledge and practice with current technology.

  6. A Brief Survey of Media Access Control, Data Link Layer, and Protocol Technologies for Lunar Surface Communications

    Science.gov (United States)

    Wallett, Thomas M.

    2009-01-01

    This paper surveys and describes some of the existing media access control and data link layer technologies for possible application in lunar surface communications and the advanced wideband Direct Sequence Code Division Multiple Access (DSCDMA) conceptual systems utilizing phased-array technology that will evolve in the next decade. Time Domain Multiple Access (TDMA) and Code Division Multiple Access (CDMA) are standard Media Access Control (MAC) techniques that can be incorporated into lunar surface communications architectures. Another novel hybrid technique that is recently being developed for use with smart antenna technology combines the advantages of CDMA with those of TDMA. The relatively new and sundry wireless LAN data link layer protocols that are continually under development offer distinct advantages for lunar surface applications over the legacy protocols which are not wireless. Also several communication transport and routing protocols can be chosen with characteristics commensurate with smart antenna systems to provide spacecraft communications for links exhibiting high capacity on the surface of the Moon. The proper choices depend on the specific communication requirements.

  7. Survey and analysis of the domestic technology level for the concept development of high level waste disposal

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Chang Sun; Kim, Byung Su; Song, Jae Hyok [Seoul National University, Seoul (Korea); Park, Kwang Hon; Hwang, Ju Ho; Park, Sung Hyun; Lee, Jae Min [Kyunghee University, Seoul (Korea); Han, Joung Sang; Kim, Ku Young [Yonsei University, Seoul (Korea); Lee, Jae Ki; Chang, Jae Kwon [Hangyang University, Seoul (Korea)

    1998-09-01

    The objectives of this study are the analysis of the status of HLW disposal technology and the investigation of the domestic technology level. The study has taken two years to complete with the participation of forty five researchers. The study was mainly carried out through means of literature surveys, collection of related data, visits to research institutes, and meetings with experts in the specific fields. During the first year of this project, the International Symposium on the Concept Development of the High Level Waste Disposal System was held in Taejon, Korea in October, 1997. Eight highly professed foreign experts whose fields of expertise projected to the area of high level waste disposal were invited to the symposium. This study is composed of four major areas; disposal system design/construction, engineered barrier characterization, geologic environment evaluation and performance assessment and total safety. A technical tree scheme of HLW disposal has been illustrated according to the investigation and an analysis for each technical area. For each detailed technology, research projects, performing organization/method and techniques that are to be secured in the order of priority are proposed, but the suggestions are merely at a superfluous level of propositional idea due to the reduction of the budget in the second year. The detailed programs on HLW disposal are greatly affected by governmental HLW disposal policy and in this study, the primary decisions to be made in each level of HLW disposal enterprise and a rough scheme are proposed. (author). 20 refs., 97 figs., 33 tabs.

  8. ITM oxygen for gasification

    Energy Technology Data Exchange (ETDEWEB)

    Armstrong, P.A.; Foster, E.P. [Air Products and Chemicals Inc., Toronto, ON (Canada); Gunardson, H.H. [Air Products Canada Ltd., Mississauga, ON (Canada)

    2005-11-01

    This paper described a newly developed air separation technology called Ionic Transport Membrane (ITM), which reduces the overall cost of the gasification process. The technology is well suited for advanced energy conversion processes such as integrated gasification combined cycle (IGCC) that require oxygen and use heavy carbonaceous feedstocks such as residual oils, bitumens, coke and coal. It is also well suited for traditional industrial applications for oxygen and distributed power. Air Products Canada Limited developed the ceramic membrane air separation technology that can reduce the cost of pure oxygen by more than 30 per cent. The separation technology achieves a capital cost reduction of 30 per cent and an energy reduction of 35 per cent over conventional cryogenic air separation. ITM is an electrochemical process that integrates well with the gasification process and an IGCC option for producing electricity from the waste heat generated from gasification. This paper described the integration of ITM technology with both the gasification and IGCC processes and showed the attractive economics of ITM. 6 refs., 2 tabs., 6 figs.

  9. Oxygen diffusion in glasses and ceramic materials

    International Nuclear Information System (INIS)

    Kolitsch, A.; Richter, E.; Wolf, M.

    1978-10-01

    A survey is given on the published works to study oxygen diffusion in glasses and ceramic materials in the last years. In the first part methods are described for the measurement of oxygen diffusion coefficients and in the second part the published reports on oxygen diffusion in glasses, ceramic and other oxides are discussed. The most important results are summarized in different tables. (author)

  10. Survey on the possibility of international cooperation on production technology of biohydrogen; Bio suiso seizo gijutsu ni kakawaru kokusai kyoryoku kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    R and D on the production technology of hydrogen by biotechnology is one of the effective projects for worldwide energy supply technology and global environment protection technology in the 21st century. The research trend of various institutions promoting R and D on production technology of biohydrogen in the U.S.A. and other countries was surveyed together with the possibility of international cooperation. The production technology of biohydrogen is being watched over the world. Various researches are in promotion corresponding to environmental conditions as follows: search of not only photosynthetic bacteria but also such bacteria with hydrogen productivity as algae and anaerobic bacteria, and the gene engineering study for improving the hydrogen productivity of target microorganisms. All the institutions visited for this survey have great expectations in wide cooperative study in the future. On the possibility of international cooperation on the production technology of biohydrogen, the further precise survey should be promoted for developing more effective technologies based on the previous survey results. 156 refs., 10 tabs.

  11. Fiscal 1990 report. Overseas surveys out of surveys for coal hydrogasification technology development; 1990 nendo sekitan suiten gaska gijutsu kaihatsu chosa ni okeru kaigai chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1990-12-01

    For the selection and evaluation of coal gasification processes suitable for substitute natural gas (SNG) production, visits were made to overseas business corporations, research institutes, etc., engaged in the development of coal gasification technology, surveys were conducted of the status of development abroad, and information was collected. Visited were Westfield Development Center, British Gas plc; Midlands Research Station, British Gas plc; IEA Coal Research; IFP (Institut Francais de Petrole); and DMT-FP (DMT-Gesellschaft fur Forschung und Prufung mbH). The Westfield Development Center uses coal from near-by open cut mines and supplies town gas to the Scottish region. The slagging Lurgi process, etc., were investigated. At Midlands Research Station, where a coal hydrogasification process is under development, the history of development and the cold model test were summarized, a test plan using a 5 tons/day pilot plant and the modification of test facilities were explained, and the 5 tons/day pilot plant was visited for study. (NEDO)

  12. A survey of characteristic engine features for technology-sustained pervasive games

    CERN Document Server

    Nevelsteen, Kim JL

    2015-01-01

    This book scrutinizes pervasive games from a technological perspective, focusing on the sub-domain of games that satisfy the criteria that they make use of virtual game elements. In the computer game industry, the use of a game engine to build games is common, but current game engines do not support pervasive games. Since the computer game industry is already rich with game engines, this book investigates: (i) if a game engine can be repurposed to stage pervasive games; (ii) if features describing a would-be pervasive game engine can be identified; (iii) using those features, if an architectu

  13. A Survey of Wireless Indoor Positioning Technology for Fire Emergency Routing

    International Nuclear Information System (INIS)

    Niu, Lei

    2014-01-01

    Fire emergency response needs positioning solutions to assist evacuation and rescue operations. Therefore, we have to carefully review the candidates for this purpose. These indoor positioning technologies show different levels of applicability in fire emergency response. According to the varying demands of emergency response, flexible localization solutions should be provided. Thus, we guide a first step to implement this concept in three pre-defined emergency scenes. At last, we conclude several key features for indoor positioning solutions for emergency routing and three future research topics

  14. Chinese Nurses' Acceptance of PDA: A Cross-Sectional Survey Using a Technology Acceptance Model.

    Science.gov (United States)

    Wang, Yanling; Xiao, Qian; Sun, Liu; Wu, Ying

    2016-01-01

    This study explores Chinese nurses' acceptance of PDA, using a questionnaire based on the framework of Technology Acceptance Model (TAM). 357 nurses were involved in the study. The results reveal the scores of the nurses' acceptance of PDA were means 3.18~3.36 in four dimensions. The younger of nurses, the higher nurses' title, the longer previous usage time, the more experienced using PDA, and the more acceptance of PDA. Therefore, the hospital administrators may change strategies to enhance nurses' acceptance of PDA, and promote the wide application of PDA.

  15. Survey of Technologies to Support Reuse of Gloveboxes at LANL TA-55

    International Nuclear Information System (INIS)

    Cadwallader, L.C.; Pinson, P.A.

    1998-01-01

    This report is a summary of ideas and technologies available to support reuse of plutonium gloveboxes at the Los Alamos National Laboratory (LANL) Technical Area 55 (TA-55). This work is the second of two deliverables in the task to enhance glovebox design for longevity and reusability at TA-55. The report presents several design change suggestions to be evaluated for their feasibility by LANL glovebox designers. The report also describes some techniques to be evaluated by LANL for their usefulness in reducing glovebox waste

  16. Intraportal islet oxygenation.

    Science.gov (United States)

    Suszynski, Thomas M; Avgoustiniatos, Efstathios S; Papas, Klearchos K

    2014-05-01

    Islet transplantation (IT) is a promising therapy for the treatment of diabetes. The large number of islets required to achieve insulin independence limit its cost-effectiveness and the number of patients who can be treated. It is believed that >50% of islets are lost in the immediate post-IT period. Poor oxygenation in the early post-IT period is recognized as a possible reason for islet loss and dysfunction but has not been extensively studied. Several key variables affect oxygenation in this setting, including (1) local oxygen partial pressure (pO(2)), (2) islet oxygen consumption, (3) islet size (diameter, D), and (4) presence or absence of thrombosis on the islet surface. We discuss implications of oxygen-limiting conditions on intraportal islet viability and function. Of the 4 key variables, the islet size appears to be the most important determinant of the anoxic and nonfunctional islet volume fractions. Similarly, the effect of thrombus formation on the islet surface may be substantial. At the University of Minnesota, average size distribution data from clinical alloislet preparations (n = 10) indicate that >150-µm D islets account for only ~30% of the total islet number, but >85% of the total islet volume. This suggests that improved oxygen supply to the islets may have a profound impact on islet survivability and function since most of the β-cell volume is within large islets which are most susceptible to oxygen-limiting conditions. The assumption that the liver is a suitable islet transplant site from the standpoint of oxygenation should be reconsidered. © 2014 Diabetes Technology Society.

  17. Tutorial on technology transfer and survey design and data collection for measuring Internet and Intranet existence, usage, and impact (survey-2000) in acute care hospitals in the United States.

    Science.gov (United States)

    Hatcher, M

    2001-02-01

    This paper provides a tutorial of technology transfer for management information systems in health care. Additionally it describes the process for a national survey of acute care hospitals using a random sample of 813 hospitals. The purpose of the survey was to measure the levels of Internet and Intranet existence and usage in acute care hospitals. The depth of the survey includes e-commerce for both business to business and with customers. The relationships with systems approaches, user involvement, user satisfaction and decision-making will be studied. Changes with results of a prior survey conducted in 1997 can be studied and enabling and inhabiting factors identified. This information will provide benchmarks for hospitals to plan their network technology position and to set goals.

  18. Fiscal 1993 technological survey report. R and D project for industrial science and technology (R and D of quantum functional device - studies on technological prediction); 1993 nendo ryoshi kino soshi no kenkyu kaihatsu (gijutsu yosoku kenkyu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-03-01

    Researches are in progress with a view to establishing fundamental technology for a quantum functional device, which engineeringly uses various quantum mechanical effects emerging in a ultrafine dimentional area, for the purpose of contributing to the micro electronics technology that deals with ultra high speed and ultra high functional information processing necessitated in an advanced information-oriented society. Survey on research activities was conducted concerning the peripheral technologies of a quantum functional device project, for example, related technologies such as a high temperature scanning tunneling microscope enabling preparation of a micro structure of nm order, and an ultra high vacuum CVD device. In addition, discussions were held on the subjects of preparation/evaluation technology of a quantum functional device and a single electronic device, with the purpose of predicting/judging, from a wider viewpoint, indications of unexpected research results of the R and D in the remarkably evolving field of quantum functional devices, quickly taking the indications into projects, and efficiently promoting the R and D by making sure of the directions to proceed. (NEDO)

  19. Report on the FY 1999 survey on long-term energy technology strategy/basic survey for working out industrial technology strategy. Technology strategy by field (formed raw material field); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (bun'yabetsu gijutsu senryaku (sokeizai bun'ya))

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    The paper described the results of the survey of the formed raw material field in relation to the FY 1999 long-term energy technology strategy. In the advancing international specialization, efforts are being made for the secure basic base technology force and cost reduction required for competition, and at the same time the aim is not to retain/improve all the formed raw material technologies, but to discriminate the materials in the aspects except the cost. By promoting the reformation into the proposed type industry, it is necessary to work out the bold strategy including the review of the system/structure for promoting the strategic technology innovation by aiming at the important formed raw material technology which can be a life line for the assembly industry, in particular. Concretely, the comprehensive technology system which concentrated a variety of engineering knowledge/information was constructed. The system is shifted to the one that adopted information/communication technology. The conversion in the early time to the proposed type industry is attempted. Japan acquires capability for heightening the level of technology, by which Japan will continue leading the formed raw material technology to the world's top level. Japan realizes the network consisting of the industry, university and government. The environment is realized where new personnel will naturally enter the formed raw material industry and bottom up the total technology force. (NEDO)

  20. Continuous remote monitoring of COPD patients-justification and explanation of the requirements and a survey of the available technologies.

    Science.gov (United States)

    Tomasic, Ivan; Tomasic, Nikica; Trobec, Roman; Krpan, Miroslav; Kelava, Tomislav

    2018-04-01

    Remote patient monitoring should reduce mortality rates, improve care, and reduce costs. We present an overview of the available technologies for the remote monitoring of chronic obstructive pulmonary disease (COPD) patients, together with the most important medical information regarding COPD in a language that is adapted for engineers. Our aim is to bridge the gap between the technical and medical worlds and to facilitate and motivate future research in the field. We also present a justification, motivation, and explanation of how to monitor the most important parameters for COPD patients, together with pointers for the challenges that remain. Additionally, we propose and justify the importance of electrocardiograms (ECGs) and the arterial carbon dioxide partial pressure (PaCO 2 ) as two crucial physiological parameters that have not been used so far to any great extent in the monitoring of COPD patients. We cover four possibilities for the remote monitoring of COPD patients: continuous monitoring during normal daily activities for the prediction and early detection of exacerbations and life-threatening events, monitoring during the home treatment of mild exacerbations, monitoring oxygen therapy applications, and monitoring exercise. We also present and discuss the current approaches to decision support at remote locations and list the normal and pathological values/ranges for all the relevant physiological parameters. The paper concludes with our insights into the future developments and remaining challenges for improvements to continuous remote monitoring systems. Graphical abstract ᅟ.

  1. Technology Readiness Level (TRL) Advancement of the MSPI On-Board Processing Platform for the ACE Decadal Survey Mission

    Science.gov (United States)

    Pingree, Paula J.; Werne, Thomas A.; Bekker, Dmitriy L.; Wilson, Thor O.

    2011-01-01

    The Xilinx Virtex-5QV is a new Single-event Immune Reconfigurable FPGA (SIRF) device that is targeted as the spaceborne processor for the NASA Decadal Survey Aerosol-Cloud-Ecosystem (ACE) mission's Multiangle SpectroPolarimetric Imager (MSPI) instrument, currently under development at JPL. A key technology needed for MSPI is on-board processing (OBP) to calculate polarimetry data as imaged by each of the 9 cameras forming the instrument. With funding from NASA's ESTO1 AIST2 Program, JPL is demonstrating how signal data at 95 Mbytes/sec over 16 channels for each of the 9 multi-angle cameras can be reduced to 0.45 Mbytes/sec, thereby substantially reducing the image data volume for spacecraft downlink without loss of science information. This is done via a least-squares fitting algorithm implemented on the Virtex-5 FPGA operating in real-time on the raw video data stream.

  2. Exploring the association between social capital and depressive symptoms: results of a survey in German information and communication technology companies.

    Science.gov (United States)

    Jung, Julia; Ernstmann, Nicole; Nitzsche, Anika; Driller, Elke; Kowalski, Christoph; Lehner, Birgit; Stieler-Lorenz, Brigitte; Friepörtner, Katharina; Schmidt, Anna; Pfaff, Holger

    2012-01-01

    This study examines the association between social capital at work and depressive symptoms in employees. Data for this cross-sectional study were collected through an online survey with the full population of employees from six companies in the German information and communication technology sector (response rate: 58.4%). A multivariate logistic regression analysis was performed. Results of data from a total of 328 employees suggest that, after controlling for sociodemographic factors, health awareness, and job strain, lower levels of perceived social capital at work are associated with the experience of depressive symptoms (OR = 0.76; 95% CI: 0.64-0.90). Our findings suggest that characteristics of high social capital at work, such as an established environment of trust and a sense of common values and convictions, could be an essential resource for preventing depressive disorders.

  3. Application of Digital Survey Mapping Technology in the Investigation of Colored Wood Statue in the Caoxi Temple

    Science.gov (United States)

    Li, Y.; Zheng, Y.

    2017-08-01

    The colored wood statues in the CaoXi Temple represent the Sandashi(Manjushri, Samantabhadra , Avalokitesvar) in the Buddhism.These statues with great value were carved in Dali kingdom of the Song dynasty. Because of natural and man-made reasons, disease has become very seriously both in the painted layer on the surface and the structure inside. So it is very important to record the current situation, analyze the structure, craft and material, and detect the cause of disease. This paper takes the colored wood statues as the research object, and kinds of digital survey technology were applied in the process. The Research results will play an important role in the protection, explanation and display.

  4. On the awareness of radiation protection. A questionnaire survey of junior college students of radiological technology

    International Nuclear Information System (INIS)

    Kayamori, Ryo; Togashi, Atsuhiko; Yamazaki, Yoshihiro; Inakoshi, Hideki

    2002-01-01

    A questionnaire survey on the awareness of radiation protection was conducted to improve our curriculum of radiation protection education, which seems to be important for the safe administrative control systems and handling techniques of radiation. A total of 426 students answered our questionnaire during the period of 1994 to 1999. They were 80 first-year, 114 second-year and 232 third-year students. The facility values of 4 questions on the influence of radiation to a human body were 50.2%, 30.3%, 28.9% and 7.0%. There was no statistically significant difference among different age groups. The facility values of 3 questions on the dose limitation of occupation exposure were 50.5% (on the effective dose equivalent), 36.4% (on the tissue dose equivalent to skin), and 40.9% (on the crystalline lens). On safe handling of radiation, only 35.7% of students correctly answered that they use a plastic board to protect themselves from β-ray, while 77.0% correctly answered the question on the decontamination method of radioactive substance from the skin. The results show the students' lack of knowledge on radiation protection. Those involved in basic science education and radiation protection education, therefore, need to clarify their teaching content and offer explicit explanations on the proper dose of radiation, effects to exposure dose, interaction between different materials and radiation. (author)

  5. Survey of Education, Engineering, and Information Technology Students Knowledge of Green Computing in Nigerian University

    Directory of Open Access Journals (Sweden)

    Tajudeen Ahmed Shittu

    2016-02-01

    Full Text Available The use of computer system is growing rapidly and there is growing concern on the environmental hazard associated with its use. Thus, the need for every user’s to possess the knowledge of using computer in an environmental friendly manner.  This study therefore, investigated the knowledge of green computing possessed by university students in Nigeria. To achieve this, survey method was employed to carry out the study. The study involved students from three schools (Computer Science, Engineering, and Education. Purposive sampling method was used to draw three hundred (300 respondents that volunteer to answer the questionnaire administered for gathering the data of the study. The instrument used was adapted but modify and subjected to pilot testing to ascertain its validity and internal consistency. The reliability of the instrument showed a .75 Cronbach alpha level.  The first research question was answer with descriptive statistic (perecentage.  T-test and ANOVA was used to answer question two and three. The findings showed that the students do not possess adequate knowledge on conscious use of computing system. Also, the study showed that there is no significant difference in the green computing knowledge possesses among male and female as well as among student from the three schools. Based on these findings, the study suggested among other an aggressive campaign on green computing among university communities.

  6. A New Optic Technology for Measuring Oxygen Dissolved in Water: Luminescence Dissolved Oxygen (LDO); Nueva tecnologia optica para la medicion de oxigeno disuelto en agua: oxigeno disuelto por luminiscencia (LDO)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-07-01

    Continual measurement of oxygen in the active sludge tank is a very important parameter is the biological treatment of waste waters. Traditional electrochemical sensors are based on polarographic or galvanic cells, a technique which produces electrolyte consumption and progressive deterioration of the anode. Both effects inevitable lead to a drift in the measurement signal, which requires periodical calibration. Lange has developed a completely new technique for its new LDO sensor for measuring oxygen concentration in waste waters. This technique is based on the luminescent radiation of a luminescent substance (luminophore) and reduces the determination to the purely physical measurement of time, so that, in theory it is free of drift and there is no need for the use to calibrate the sensor. (Author)

  7. Quantum Information, computation and cryptography. An introductory survey of theory, technology and experiments

    International Nuclear Information System (INIS)

    Benatti, Fabio; Fannes, Mark; Floreanini, Roberto; Petritis, Dimitri

    2010-01-01

    This multi-authored textbook addresses graduate students with a background in physics, mathematics or computer science. No research experience is necessary. Consequently, rather than comprehensively reviewing the vast body of knowledge and literature gathered in the past twenty years, this book concentrates on a number of carefully selected aspects of quantum information theory and technology. Given the highly interdisciplinary nature of the subject, the multi-authored approach brings together different points of view from various renowned experts, providing a coherent picture of the subject matter. The book consists of ten chapters and includes examples, problems, and exercises. The first five present the mathematical tools required for a full comprehension of various aspects of quantum mechanics, classical information, and coding theory. Chapter 6 deals with the manipulation and transmission of information in the quantum realm. Chapters 7 and 8 discuss experimental implementations of quantum information ideas using photons and atoms. Finally, chapters 9 and 10 address ground-breaking applications in cryptography and computation. (orig.)

  8. Site vegetation report: Terrestrial vegetation survey (1993--1995) for the Rocky Flats Environmental Technology Site

    International Nuclear Information System (INIS)

    1997-06-01

    The Ecological Monitoring Program (EcMP) was designed to investigate the long-term ecological trends in terrestrial and aquatic ecosystems at the US Department of energy's (DOE's) Rocky Flats Environmental Technology Site (Site) (DOE 1993). Field sampling was conducted during 1993, 1994, and 1995, until the program was terminated in late 1995. This report presents the terrestrial vegetation data that were gathered by the EcMP. The site is located on the Colorado Piedmont, east of the Front Range, between Boulder and Golden, approximately 25 km (16 miles) northwest of Denver. The topography and proximity of the Site to the mountain front result in an interesting mixture of prairie and mountain plant species. The Site is one of the few large, relatively undisturbed areas of its kind that remains along the Colorado Piedmont. Until 1989, the primary mission of the Site was the production of nuclear weapons components (DOE 1993). After production ceased, Site personnel shifted their focus to cleanup and closure

  9. Survey of a fusion technology for wireless PEC with energy harvesting in nuclear industry

    International Nuclear Information System (INIS)

    Lee, Jae Cheol; Choi, Yoo Rark

    2008-01-01

    The wireless sensor network has a power-supply problem by constitution. Large amount of sensors are used in wireless networks and each sensor needs energy source for its operation. The life of a battery used in a sensor is finite. When a battery went out, we must exchange it with new one. But the number of sensors used in the wireless network is too numerous, so it is somewhat terrible job to exchange the exhausted batteries with new ones. Various researches have been executed to solve this problem. The mainstreams of them are energy efficiency and energy harvesting. The protocols such as flat-based routing, hierarchical-based routing, location-based routing and MAC protocol have been developed and applied to sensor networks for energy efficiency. But energy harvesting methods can be a ultimate solution. Energy harvesting is the process for capturing and storing of energies. A variety of different sources exist for harvesting energy, such as solar power, thermal energy, wind energy, salinity gradients and kinetic energy. We described an energy harvesting technology and a wireless pulsed eddy currents(PEC) inspection based on it

  10. Site vegetation report: Terrestrial vegetation survey (1993--1995) for the Rocky Flats Environmental Technology Site

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-06-01

    The Ecological Monitoring Program (EcMP) was designed to investigate the long-term ecological trends in terrestrial and aquatic ecosystems at the US Department of energy`s (DOE`s) Rocky Flats Environmental Technology Site (Site) (DOE 1993). Field sampling was conducted during 1993, 1994, and 1995, until the program was terminated in late 1995. This report presents the terrestrial vegetation data that were gathered by the EcMP. The site is located on the Colorado Piedmont, east of the Front Range, between Boulder and Golden, approximately 25 km (16 miles) northwest of Denver. The topography and proximity of the Site to the mountain front result in an interesting mixture of prairie and mountain plant species. The Site is one of the few large, relatively undisturbed areas of its kind that remains along the Colorado Piedmont. Until 1989, the primary mission of the Site was the production of nuclear weapons components (DOE 1993). After production ceased, Site personnel shifted their focus to cleanup and closure.

  11. Survey of the energy use rationalization freon decomposition technology (public use); Energy shiyo gorika freon bunkai gijutsu chosa. (kokaiyo)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The paper made a research survey of a technology to decompose the recovered CFC (specified freon) in which energy efficiency is high and no hazardous materials such as dioxin are generated. As to the technology to decompose specified freon, the high frequency plasma method, the cement kiln method and the combustion method are at the stage of the demonstration test and close to the commercialization. The catalyst method has finished the basic test and is at the stage of a pilot plant. Besides, there are the supercritical water decomposition method, the ultraviolet decomposition method, etc., but they are at the stage of the fundamental research. Mechanisms of the dioxin generation and the suppression of dioxin generation in case of incinerating waste mixed with halide have been made clear. In the fundamental test, conditions were obtained under which the freon decomposition rate of more than 99.99% is attained by the combustion of a mixture of industrial waste and freon using the combustion method, and measures for reduction in hazardous materials such as dioxin were expected to be taken. In the catalyst method, the result obtained was the decomposition rate of more than 99.99% and the catalyst life of more than 1000 years, and its practicality was confirmed. 43 refs., 97 figs., 29 tabs.

  12. A Survey of the Rapidly Emerging Field of Nanotechnology: Potential Applications for Scientific Instruments and Technologies for Atmospheric Entry Probes

    Science.gov (United States)

    Meyyappan, M.; Arnold, J. O.

    2005-01-01

    The field of Nanotechnology is well funded worldwide and innovations applicable to Solar System Exploration are emerging much more rapidly than thought possible just a few years ago. This presentation will survey recent innovations from nanotechnololgy with a focus on novel applications to atmospheric entry science and probe technology, in a fashion similar to that presented by Arnold and Venkatapathy at the previous workshop forum at Lisbon Portugal, October 6-9, 2003. Nanotechnology is a rapidly emerging field that builds systems, devices and materials from the bottom up, atom by atom, and in so doing provides them with novel and remarkable macro-scale performance. This technology has the potential to revolutionize space exploration by reducing mass and simultaneously increasing capability. Thermal, Radiation, Impact Protective Shields: Atmospheric probes and humans on long duration deep space missions involved in Solar System Exploration must safely endure 3 significant hazards: (i) atmospheric entry; (ii) radiation; and (iii) micrometeorite or debris impact. Nanostructured materials could be developed to address all three hazards with a single protective shield, which would involve much less mass than a traditional approach. The concept can be ready in time for incorporation into NASA s Crew Exploration Vehicle, and possible entry probes to fly on the Jupiter Icy Moons

  13. FY 1999 New Sunshine Project survey research project - Survey on the long-term energy technology strategy, etc. Fundamental survey to decide on the industrial technology strategy - Technology strategy by field (Fiber technology field); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (bun'yabetsu gijutsu senryaku (sen'i gijutsu bun'ya))

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    The survey/study were conducted to contribute to proposing technology strategies such as the analysis of the present state of technical competitive force and the forecast in the fiber industry technology field. For the fiber industry to meet the requests from the society in the 21st century and to develop as an industry, it is necessary to achieve the technology innovation by making use of technology and recreation. As important seeds for which the Japanese fiber industry should focus efforts, the following were cited: To double the strength of general-purpose polymer synthetic fiber; To add the environmental control function by gradient functionalization; To practically use the environmental harmony type nonaqueous working process; To develop the fiber environmentally friendly and fiber working process; To give sensor functions such as temperature-humidity sensitive function; To develop petroleum substituting fiber materials; To develop separation/decomposition technology and reproduction technology of composite materials; etc. Further, in the recreation field, the paper cited the arrangement of intellectual property protection/design property preservation, and the promotion of commercial base making and strengthening of life style proposals. (NEDO)

  14. Oxygen safety

    Science.gov (United States)

    ... sure you have working smoke detectors and a working fire extinguisher in your home. If you move around the house with your oxygen, you may need more than one fire extinguisher in different locations. Smoking can be very dangerous. No one should smoke ...

  15. Amostra mestra e geoprocessamento: tecnologias para inquéritos domiciliares Master sample and geoprocessing: technologies for household surveys

    Directory of Open Access Journals (Sweden)

    Nilza Nunes da Silva

    2003-08-01

    census enumeration areas in several epidemiological surveys using updated information from the National Survey of Households (PNAD. METHODS: Address data file comprising 72 census enumeration areas was kept as primary sampling units for the city of São Paulo. During the period 1995-2000, three distinct household samples were drawn using the two-stage cluster sampling procedure. Geographic Information System (GIS technology allowed delimiting boundaries, blocks and streets for any primary sampling unit and printing updated maps for selected sub-samples. RESULTS: Twenty-five thousand dwellings made up the permanent address data file of the master sample. A cheaper and quicker selection of each sample, plus gathering information on demographic and topographical profiles of census enumeration areas were the main contribution of the study results. CONCLUSIONS: The master sample concept, integrated with GIS technology, is an advantageous alternative sampling design for household surveys in urban areas. Using the list of addresses from the PNAD updated yearly, although limiting its application to the most populated Brazilian cities, avoids the need of creating an independent sampling procedure for each individual survey carried out in the period between demographic censuses, and it is an important contribution for planning sampling surveys in public health.

  16. FY 2000 report on the survey on the long-term energy technology strategy, etc. - Basement technology for implementation of industrial technology strategy. Survey on the extraction of preferential important technical subjects in FY 2002; 2000 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho - sangyo gijutsu senryaku sakutei kiban chosa. 2002 nendo yusenteki juyo gijutsu kadai no chushutsu ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    This survey is to investigate the consciousness of researchers and engineers of enterprises, universities, etc, of the importance of about 100 important technical subjects in 'the industrial technology strategy' prepared by the Ministry of Economy, Trade and Industry. In the questionnaire survey, the following were selected: 1)systematization of policy in consideration of the social needs and R and D of the technology to realize it; 2) R and D of the technology to advance the future frontier; 3) technical subjects that the government should promptly start to tackle in each classification in arrangement of the intellectual basis. Answers to the following items were obtained: 'selection reasons' for why it was considered important in each technical subject, 'lead time' toward the time of the industrialization, 'international positioning' of Japan against Western countries, 'possibility of heightening/maintaining the international competitive force,' and 'items that the government should participate in.' In 1), the following four big targets were arranged: 'security/safety,' 'informatization,' 'environment' and 'energy'. In 2), the following technical subjects were arranged: 'biotechnology,' 'information communication technology,' 'production technology,' 'materials/process technology,' 'energy/environment' and 'new blending/traversable/integrated technology.' In the results of the survey, analyzed were big targets, and trends and characteristics at technical field levels. (NEDO)

  17. Oxygen therapy - infants

    Science.gov (United States)

    ... breathe increased amounts of oxygen to get normal levels of oxygen in their blood. Oxygen therapy provides babies with the extra oxygen. Information Oxygen is a gas that the cells in your body need to work properly. The ...

  18. FY 1999 report on the survey of the history/inheritance of industrial technology. Survey of the inheritance/education of technology in museums of industrial technology in Japan; 1999 nendo sangyo gijutsu rekishi keisho chosa hokokusho. Kokunai sangyo gijutsu hakubutsukan ni okeru gijutsu keisho keihatsu chosa hen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    For the purpose of clarifying the course of promotion of the original/creative future R and D and contributing to selection of technical themes and working-out of developmental methods, survey was conducted paying visits to museums of industrial technology in Japan which evaluate/preserve/exhibit/utilize memorial goods, data, information pertaining to the industrial technology in Japan. Museums for survey were the following ten: Chiba Museum of Science and Industry; Garasu no Sato (Glass Village); Maizuru World Brick Museum; Museum of Industrial Technology; Numata Memorial Hall/Mitsutoyo Museum of Dimensional Metrology; Omachi Energy Museum; Sake Museum; Saint Juan Bautista Museum; Subway Museum; Textile Museum Yukari. One of the points of this survey was to survey the actual state of the experimental type exhibition. The experimental type exhibition, which is wide in sphere, seems to be effective since visitors can operate it, simulate it, feel its size and make scientific experiments. However, the museums are not necessarily satisfied with the present situation. (NEDO)

  19. A Survey of the Literature on Unintended Consequences Associated with Health Information Technology: 2014–2015

    Science.gov (United States)

    Abraham, J.; Novak, L. L.; Reynolds, T. L.; Gettinger, A.

    2016-01-01

    Summary Objective To summarize recent research on unintended consequences associated with implementation and use of health information technology (health IT). Included in the review are original empirical investigations published in English between 2014 and 2015 that reported unintended effects introduced by adoption of digital interventions. Our analysis focuses on the trends of this steam of research, areas in which unintended consequences have continued to be reported, and common themes that emerge from the findings of these studies. Method Most of the papers reviewed were retrieved by searching three literature databases: MEDLINE, Embase, and CINAHL. Two rounds of searches were performed: the first round used more restrictive search terms specific to unintended consequences; the second round lifted the restrictions to include more generic health IT evaluation studies. Each paper was independently screened by at least two authors; differences were resolved through consensus development. Results The literature search identified 1,538 papers that were potentially relevant; 34 were deemed meeting our inclusion criteria after screening. Studies described in these 34 papers took place in a wide variety of care areas from emergency departments to ophthalmology clinics. Some papers reflected several previously unreported unintended consequences, such as staff attrition and patients’ withholding of information due to privacy and security concerns. A majority of these studies (71%) were quantitative investigations based on analysis of objectively recorded data. Several of them employed longitudinal or time series designs to distinguish between unintended consequences that had only transient impact, versus those that had persisting impact. Most of these unintended consequences resulted in adverse outcomes, even though instances of beneficial impact were also noted. While care areas covered were heterogeneous, over half of the studies were conducted at academic medical

  20. NAL-Tokyo Institute of Technology: Oxygen concentration on the surface of the solid, C[sub 6]0 are used, and it succeeds in the measurement. Kotai hyomen no sanso nodo, C[sub 60] mochii sokuteini seiko

    Energy Technology Data Exchange (ETDEWEB)

    1998-12-31

    NAL succeeded in oxygen concentration measurement on the surface of the solid which fralen (C[sub 6]0) which was the same base body in cooperation with Tokyo Institute of Technology, biotechnology course as to carbon was used for fralen absorbs light, and materiality to be returned in the condition (base bottom condition) of the place by this activated condition's reacting for the activated condition with oxygen is used. The condition that became of this fralen was used, and oxygen pressure (concentration) developed how to measure it. Oxygen pressure on the surface of the irradiation is measured the light with applying fralen on the surface of the measurement solid and spraying oxygen gas on the application side. So far, 100 points and more of holes were made on the surface of the model, and a pressure sensor was installed, and pressure measurement was being done, and it was as it were the measurement of the meeting body of the point in the aircraft and the wind experiment of the rocket model. The application of fralen, light only irradiates it, and oxygen pressure can be measured easily in the way of measuring it this time. Moreover, it is the measurement of the non-contact and non-destruction side. The illuminant, which makes fralen activated condition again, is sufficient with the visible light, and it is said that it doesn't need to use purple outside light about it. If light can irradiate it again, the surface pressure of which part can be measured, too. (translated by NEDO)

  1. NAL-Tokyo Institute of Technology: Oxygen concentration on the surface of the solid, C{sub 6}0 are used, and it succeeds in the measurement; Kotai hyomen no sanso nodo, C{sub 60} mochii sokuteini seiko

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-31

    NAL succeeded in oxygen concentration measurement on the surface of the solid which fralen (C{sub 6}0) which was the same base body in cooperation with Tokyo Institute of Technology, biotechnology course as to carbon was used for fralen absorbs light, and materiality to be returned in the condition (base bottom condition) of the place by this activated condition`s reacting for the activated condition with oxygen is used. The condition that became of this fralen was used, and oxygen pressure (concentration) developed how to measure it. Oxygen pressure on the surface of the irradiation is measured the light with applying fralen on the surface of the measurement solid and spraying oxygen gas on the application side. So far, 100 points and more of holes were made on the surface of the model, and a pressure sensor was installed, and pressure measurement was being done, and it was as it were the measurement of the meeting body of the point in the aircraft and the wind experiment of the rocket model. The application of fralen, light only irradiates it, and oxygen pressure can be measured easily in the way of measuring it this time. Moreover, it is the measurement of the non-contact and non-destruction side. The illuminant, which makes fralen activated condition again, is sufficient with the visible light, and it is said that it doesn`t need to use purple outside light about it. If light can irradiate it again, the surface pressure of which part can be measured, too. (translated by NEDO)

  2. Report on a survey in fiscal 1999. Survey on trends in new carbon dioxide fixation technologies utilizing bacteria and algae. (3); 1999 nendo saikin sorui wo riyoshita atarashii nisanka tanso kotei gijutsu no doko chosa. 3

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    In order to achieve collection and effective utilization of CO2 as the representative greenhouse effect gas, through use of microorganism functions, a survey was performed on problems when the CO2 fixation system is applied to factories, based on the results of surveys in fiscals 1997 and 1998 and the supplementary surveys therein. Discussions were given on feasibility and effect of introducing the in situ CO2 fixation systems. With regard to the current status and problems in technologies to fix and utilize effectively CO2 by use of photosynthetic bacteria and micro algae by means of solar beam, the paper summarizes the 'searches and breeding of bacteria and algae' and the 'research and development of a high-density and large-quantity cultivation system such as for CO2 fixation and useful substance production'. The paper also describes problems in the CO2 fixation technologies utilizing bacteria and algae. With regard to the CO2 fixation technologies utilizing bacteria and algae, the paper summarized the contents of the survey on CO2 fixation by using photosynthetic bacteria, clostridium bacteria, and coryne bacteria. Surveys were performed inside and outside the country on kinds and existence quantities of unutilized organic wastes in which microorganisms that fix CO2 can be utilized. The CO2 fixation systems can be considered of their possibilities of being introduced into foodstuff factories where organic waste water with high concentration can be obtained. (NEDO)

  3. Report on a survey in fiscal 1999. Survey on trends in new carbon dioxide fixation technologies utilizing bacteria and algae. (3); 1999 nendo saikin sorui wo riyoshita atarashii nisanka tanso kotei gijutsu no doko chosa. 3

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    In order to achieve collection and effective utilization of CO2 as the representative greenhouse effect gas, through use of microorganism functions, a survey was performed on problems when the CO2 fixation system is applied to factories, based on the results of surveys in fiscals 1997 and 1998 and the supplementary surveys therein. Discussions were given on feasibility and effect of introducing the in situ CO2 fixation systems. With regard to the current status and problems in technologies to fix and utilize effectively CO2 by use of photosynthetic bacteria and micro algae by means of solar beam, the paper summarizes the 'searches and breeding of bacteria and algae' and the 'research and development of a high-density and large-quantity cultivation system such as for CO2 fixation and useful substance production'. The paper also describes problems in the CO2 fixation technologies utilizing bacteria and algae. With regard to the CO2 fixation technologies utilizing bacteria and algae, the paper summarized the contents of the survey on CO2 fixation by using photosynthetic bacteria, clostridium bacteria, and coryne bacteria. Surveys were performed inside and outside the country on kinds and existence quantities of unutilized organic wastes in which microorganisms that fix CO2 can be utilized. The CO2 fixation systems can be considered of their possibilities of being introduced into foodstuff factories where organic waste water with high concentration can be obtained. (NEDO)

  4. Report on the FY 1999 survey on long-term energy technology strategy/basic survey for working out industrial technology strategy. Technology strategy by field - chemical/process field (chemical/process technology field); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (bun'yabetsu gijutsu senryaku (kagaku process bun'ya (kagaku process gijutsu bun'ya)))

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    As to long-term energy technology strategy, the paper described the results of the FY 1999 survey of chemical/process technology. The future chemical technology should be transformed from the material production technology in which priority used to be given to convenience to new chemical technology in which the functions needed are to be created. The shortage of the developmental period and minimization of the waste are also desired by the use of new methods. For it, the industry/government/university should gather wisdom together and fulfil the requests from other industries of the country under the circumstances of the society which is aging, is decreasing in birthrate, and is being highly information-oriented. At the same time, the technology should be contributional to constructing the circulating type society which has environmental harmony. If not, it cannot be the technology which is recognized by the society. Efforts should be made for the fundamental technology development, technology to create the materials needed in the society, and development of new process technology to be recognized in the society. Further, the development of technology to meet the needs/restraints from the society should be promoted as seen in the environmental hormone. At the same time, the intellectual base should be prepared such as arrangement of the technology database for advancing smooth technology development. (NEDO)

  5. Fiscal 2000 survey report. Survey of long-term energy technology strategy and the like (Survey of natural gas technology trend); 2000 nendo choki energy gijutsu senryaku nadoni kansuru chosa hokokusho. Choki energy gijutsu senryaku chosa (tennen gas gijutsu doko chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    In search of new technical tasks involving the supply, transportation, and utilization of natural gas, a survey is conducted of the trend of natural gas supply and demand, trend of development of related technologies, and their impact on the market. After natural gas matters are outlined and definition and classification are established, investigations are conducted into natural gas production and the trend of new natural gas consuming countries supposedly to affect the natural gas supply and demand situation. Taken up as relevant technologies are cogeneration, natural gas powered automobiles, fuel cells, GTL (gas to liquid) technology, and micro gas turbines. These technologies are examined from the viewpoints of environmentally-friendliness and energy conservation feature, and then tasks to discharge are proposed in the fields of technology development, operation, and fuel. For natural gas powered automobiles, vehicular performance improvement and the conformability and standardization of high-pressure parts and components are taken up in the field of technology development, and the introduction and augmentation of quick fillers for natural gas and increase in the number of natural gas supply stations are taken up in the field of operation. Concerning fuel cells, in the field of fuels to be fed to the same, technologies of hydrogen storage and of refining and reforming of oil based fuels are taken up. (NEDO)

  6. Research report of fiscal 1997. Survey on strategies of export of environment technology in overseas countries; 1997 nendo chosa hokokusho. Shogaikoku no kankyo gijutsu yushutsu senryaku chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    For active environment technology export to OECD countries, needs for environmental measures in developing countries were surveyed. Both collection of environment technology needs in developing countries and preparation of technology seeds information of Japanese enterprises, and promotion of environmental projects by adding an information dispatch function are important. Active preparation and exchange of experiences and know-how of concerned enterprises, local governments and national organizations are also necessary. For development and possible export of small- and medium-sized ventures with excellent technologies and know-how, a suitable consulting system is essential for risks. For smooth promotion of warming prevention by international cooperation, active development of monitoring technology is also important. To support developing countries, OJT of persons in charge in technology transfer sites, and preparation of information infrastructure are necessary. Japan with much know-how on environmental preservation should positively participate in international standardization activities such as ISO. 10 refs., 14 figs., 56 tabs.

  7. Report on the surveys in fiscal 1999. Surveys on foundations for establishing industrial technology strategies (Strategies by fields - Bio technology field); 1999 nendo sangyo gijutsu senryaku sakutei kiban chosa hokokusho. Bun'yabetsu gijutsu senryaku (Bio technology bun'ya)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    In order to deal with strengthening of competitive power in the bio-technological field and social requirements thereon, it was intended to establish target setting, ways to achieve the objectives, and technological strategies including extraction of policy problems, by combining the wisdom possessed by industries, governmental organizations, and academic world. Section 1 describes the result of the surveys on establishing technological strategies by fields. America tackles importantly with matters related to life science. Japan is strong in fermentation technologies, bio-reactors, and enzyme engineering. Japan stands nearly equal, or is slightly inferior to America in clone livestocks and bio-sensors. Japan's competitiveness is very low in such advanced technology fields as gene therapies, gene combined agricultural products, bio-agricultural chemicals, gene exploration technologies, and gene diagnosis. Section 2 describes technological strategies in four fields. To explain, the improvement in foundations to raise efficiencies in research and development and industrialization processes, strategies to place importance on such industrial fields as realizing 'wishes of people for happiness of diversified nature', the improvement of the environment in which people and societies can enjoy benefits brought about by growth of the industries, and structuring of institutions to promote industrialization of bio-technologies for the nation as a whole. (NEDO)

  8. FY1998 report on the surveys and studies on developing next generation chemical process technologies; 1998 nendo jisedai kagaku process gijutsu kaihatsu ni kansuru chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    For further resource and energy conservation and environmental load reduction, development is necessary on innovative chemical reaction technologies. This paper describes surveys on next generation chemical processes. As non-halogen processes subject to development of new catalysts, new processes were investigated and searching experiments and discussions were given on isocyanate, propylene oxide, and phenol. Technological progress in the C1 chemistry was investigated. Problems in hydrocarbon compound oxidation, hydroxylation, and decomposition by utilizing microorganisms were put into order as application of environmentally friendly technologies. Marine biotechnical possibilities were surveyed. The surveys were given on new processes utilizing the phase transfer catalyst forming a third phase, manufacture of biodegradable plastics, and a novel reaction system combined with self-separation process using molecular assembly. Possibilities were searched on designing a truly simple production system of highly energy saving type. Such fundamental common technologies as structure analysis, property control and reaction engineering were investigated for methods to manufacture functional micro-powder chemical materials. Development was discussed on a system for technology assessment over whole product life cycle to structure a technology assessment basis. (NEDO)

  9. FY 2000 report on the survey of energy conservation technology in Japan; 2000 nendo chosa hokoku. Nihon kokunai no sho energy gijutsu ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    For the purpose of supporting self-help efforts to deal with energy environmental problems in developing countries in the Asian region, etc. and making the transfer of the energy conservation technology and petroleum substituting energy technology that are at a practical stage and are owned by Japan, evaluation of each technology was conducted in terms mainly of applicability for a model project. The existing survey data were supplemented/deleted. As the model project supposing the application to developing countries in Asia, types of industry for survey were selected as follows: iron/steel, nonferrous metal, chemical industry, oil refining, ceramics/earthware, paper/pulp, foodstuffs, textile/spinning, electricity (power generation)/gas, technologies common to all industry types. Technologies for survey were energy saving production facilities and energy saving equipment at plant with a regular scale to which the applicability as the model project was supposed. The energy saving effect was all calculated in TOE, and the method to calculate the effect was also described. The paper further described possibilities of introduction/spread of the said technologies to developing countries in Asia, introduction limitation/preconditions, cost vs. effect, etc. (NEDO)

  10. Report on the FY 1999 survey on long-term energy technology strategy/basic survey for working out industrial technology strategy. Technology strategy by field - material technology field (nonferrous metal field); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (bun'yabetsu gijutsu senryaku (zairyo gijutsu bun'ya (hitetsu kinzoku bunya)))

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    The paper described the results of the survey of the nonferrous metal field relating to the FY 1999 long-term energy technology strategy. The needs for electronics products are increasing toward the 21st century. Domestically the competition with other countries in enlarging the market share has been intensifying. At the same time, the smaller the size of device becomes, the more the barriers in technology to be overcome increase. In the development of Si wafer to cope with such a situation, there are a lot of problems to be broken down in liaison with industry/government/university. Compound semiconductors are higher in speed than Si, and have a marked feature of producing light, but are difficult in crystal growth. It was in the past 20 years that the development of commercialization technology has rapidly advanced. Compound semiconductors are indispensable as a device in the energy problem which strongly influences the global environment. In the U.S., for the military use, a policy for upbringing national industries has been carried out since 1993. The role of compound semiconductor materials playing as the fundamental industry which supports the semiconductor industry and system industry as the nation's core industries is important even in Japan the same as in the U.S. (NEDO)

  11. Report on the FY 1999 survey on long-term energy technology strategy/basic survey for working out industrial technology strategy. Technology strategy by field - material technology field (nonferrous metal field); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (bun'yabetsu gijutsu senryaku (zairyo gijutsu bun'ya (hitetsu kinzoku bunya)))

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    The paper described the results of the survey of the nonferrous metal field relating to the FY 1999 long-term energy technology strategy. The needs for electronics products are increasing toward the 21st century. Domestically the competition with other countries in enlarging the market share has been intensifying. At the same time, the smaller the size of device becomes, the more the barriers in technology to be overcome increase. In the development of Si wafer to cope with such a situation, there are a lot of problems to be broken down in liaison with industry/government/university. Compound semiconductors are higher in speed than Si, and have a marked feature of producing light, but are difficult in crystal growth. It was in the past 20 years that the development of commercialization technology has rapidly advanced. Compound semiconductors are indispensable as a device in the energy problem which strongly influences the global environment. In the U.S., for the military use, a policy for upbringing national industries has been carried out since 1993. The role of compound semiconductor materials playing as the fundamental industry which supports the semiconductor industry and system industry as the nation's core industries is important even in Japan the same as in the U.S. (NEDO)

  12. Fiscal 1993 technological survey report. R and D project for industrial science and technology (R and D of quantum functional device); 1993 nendo ryoshi kino soshi no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-03-01

    An examination is in progress with a view to establishing fundamental technology for a quantum functional device, which engineeringly uses various quantum mechanical effects emerging in a ultrafine dimentional area, for the purpose of contributing to the micro electronics technology that deals with ultra high speed and ultra high functional information processing necessitated in an advanced information-oriented society. As a general research study, survey on the technological trend was done, as was the analysis/examination of the R and D. In regard to the R and D of quantization technology, with the object of structuring an element device by means of quantization functions and structuring an integration system, examinations were made on tunneling in semiconductors, physical phenomenon like electrical conduction, ultrafine fabrication techniques, etc., with R and D conducted on structures and forming technique for realizing quantization functions such as quantum wire and quantum dot, crystal growing technology, simulation technology, design of materials, etc.. (NEDO)

  13. Technological development for super-high efficiency solar cells. Survey on the commercialization on analysis; Chokokoritsu taiyo denchi no gijutsu kaihatsu. Jitsuyoka kaiseki ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Tatsuta, M [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1994-12-01

    This paper reports the survey results on analysis of super-high efficiency solar cells for practical use in fiscal 1994. (1) On the survey on crystalline compound solar cells, it was pointed out that the present study target is III-V compound semiconductor solar cell, and efficiencies of 36-39% are theoretically expected by use of two-junction cells. (2) On structure of super-high efficiency solar cells of 40%, selection of upper and lower cell materials for multi-junction cells, high-efficiency tandem Si solar cells, and the merit and possibility of light collection operation were surveyed, and their issues were discussed. (3) On physical properties of mixed crystalline semiconductors and characteristic evaluation of solar cells, impurities, trap center, minority carrier life, and applicability of supper lattice structure to high-efficiency solar cells were surveyed. (4) On fabrication technology of compound semiconductor solar cells, various problems of and approaches to electrode formation and antireflection film technologies, the meaning and issues of thin film substrate technology and continuous process, trial calculation of costs, safety, and resource problem were surveyed.

  14. Present practice and treatment strategies in endourological stone management: results of a survey of the European Society of Uro-technology (ESUT)

    NARCIS (Netherlands)

    Kauer, P. C.; Laguna, M. P.; Alivizatos, G.; Joyce, A.; Muschter, R.; Swartz, R.; Tolley, D.; de la Rosette, J. J. M. C. H.

    2005-01-01

    OBJECTIVES: The European Society of Urological Technology (ESUT) conducted a survey in order to assess and record the current trends between urologists with regard to the application of endourological stone management to identify trends and differences in treatment strategies among urologists.

  15. Demonstration of a Cylinder Fill System Based on Solid Electrolyte Oxygen Separator (SEOS) Technology: Early Field Assessment at a USAF Maintenance Facility

    Science.gov (United States)

    2010-06-01

    is governed by the Nernst equation : )ln( 4 , , 2 2 cathodeO anodeO N p p F RT V  (1) Removal of the oxygen product from the anode side of the...requires applied voltages higher than the Nernst voltage, VN. This overpotential increases the productivity per cell. However, the increased

  16. On the gasification of biomass in a steam-oxygen blown CFB gasifier with the focus on gas quality upgrading : Technology background, experiments and mathematical modeling

    NARCIS (Netherlands)

    Siedlecki, M.

    2011-01-01

    This work presents and discusses the results of the research on the gasification of biomass in an atmospheric circulating fluidized bed, with a mixture of steam and oxygen as fluidization / gasification medium. The main objectives of this research were to investigate and improve the gasification

  17. Employee Perception of the Impact of Information Technology Investment in Organisations: a survey of the hotel industry

    Directory of Open Access Journals (Sweden)

    Bruce Lo

    2000-05-01

    Full Text Available To improve their operational efficiency and to maintain their competitiveness in the market place many organisations continue to invest substantially in their Information Technology (IT capability. But how do the employees themselves view the impact and the value of IT investment? This paper considers this question in the context of the hospitality industry. More specifically, it investigates the different perception of hotel employees on the impact of organisational IT investment on (a IT usage by employees, (b employee satisfaction with the IT systems, (c changes in the level of employee performance, and (d organisational performance of the hotel. 945 hotel employees in Bali, Indonesia were surveyed to assess their perception of the organisational impact of IT. Factor analysis, analysis of variance and regression analysis were performed on the data to examine the' range of employee viewpoints. Results showed that there were significant differences among the employees' perception with respect to age, educational level, position in the hotel, and individual income. These findings suggest that even senior management may regard the investment in IT is worthwhile, there may be a divergence of opinion among the employees as to what are the real benefits of IT. In order to fully leverage the potential of their IT investment, managers should pay particular attention to shaping the views of the employees who ultimately determine whether the IT capabilities in an organisation are put to use.

  18. Satisfaction Survey on Information Technology-Based Glucose Monitoring System Targeting Diabetes Mellitus in Private Local Clinics in Korea

    Directory of Open Access Journals (Sweden)

    Hun-Sung Kim

    2017-06-01

    Full Text Available BackgroundPrivate local clinics in Korea have little experience with information technology (IT-based glucose monitoring (ITGM. Our aim is to examine user satisfaction and the possibility of using ITGM service practically.MethodsPatients sent their blood glucose levels to physicians in local clinics. The physicians reviewed the blood glucose values online and provided personal consultations through text messaging or phone calls. Thereafter, a satisfaction survey on the ITGM service, the modified Morisky scale, and patient assessment of chronic illness care were administered.ResultsOne hundred and seventy patients from seven private local clinics used the ITGM. Overall satisfaction, including that about the ITGM service, the device, and its usefulness, was rated higher than “mostly satisfied” (score 4.2±0.8 out of 5.0 and even higher among the elderly. Satisfaction was positively associated with age, especially in those older than 60 years. The main reason for intent for future use of the service was the time/place flexibility. Highly motivated patients tended to answer positively regarding information satisfaction (P=0.0377.ConclusionOur study is the first to investigate ITGM satisfaction in private local clinics. The feasibility of users utilizing ITGM should be clarified, and future clinical research on the service's clinical effects and cost-benefit analysis is needed.

  19. Fiscal 1993 survey report. Coal hydrogasification technology development; 1993 nendo sekitan suiten gaska gijutsu kaihatsu chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-03-01

    Surveys and studies were conducted to establish a practical SNG (substitute natural gas) production process. The hydrogasification process that Japan should develop is a flexible process that operates on the three modes of the maximum SNG yield, the maximum heat efficiency, and the maximum BTX (benzene, toluene, xylene) yield. Such being the case, an ARCH (advanced rapid coal hydrogasification) process was proposed, provided with a reactor capable of an ARCH-1 type operation for the maximum gas cooling efficiency and an ARCH-2 type operation for the maximum liquid yield. As for the details of the ARCH process development, the time and priority for development were determined for each of the items in consideration of the technical contents and the steps of development in the flow from a bench plant to a demonstration plant. The technology of char cooling and extraction was specified as the first item to be immediately dealt with. As for the development of the hydrogasification reactor, it was concluded that it was suitable to begin with the development of an injector. According to the development plan, the cost required up to a pilot plant test was estimated at 2 billion yen. (NEDO)

  20. Parametric survey for benefit of partitioning and transmutation technology in terms of high-level radioactive waste disposal

    International Nuclear Information System (INIS)

    Oigawa, Hiroyuki; Nishihara, Kenji; Morita, Yasuji; Yokoo, Takeshi; Ikeda, Takao; Takaki, Naoyuki

    2007-01-01

    Benefit of implementing Partitioning and Transmutation (P and T) technology was parametrically surveyed in terms of high-level radioactive waste (HLW) disposal by discussing possible reduction of the geological repository area. First, the amount and characteristics of HLWs caused from UO 2 and MOX spent fuels of light-water reactors (LWR) were evaluated for various reprocessing schemes and cooling periods. The emplacement area in the repository site required for the disposal of these HLWs was then estimated with considering the temperature constrain in the repository. The results showed that, by recycling minor actinides (MA), the emplacement area could be reduced by 17-29% in the case of UO 2 -LWR and by 63-85% in the case of MOX-LWR in comparison with the conventional PUREX reprocessing. This significant impact in MOX fuel was caused by the recycle of 241 Am which was a long-term heat source. Further 70-80% reduction of the emplacement area in comparison with the MA-recovery case could be expected by partitioning the fission products (FP) into several groups for both fuel types. To achieve this benefit of P and T, however, it is necessary to confirm the engineering feasibility of these unconventional disposal concepts. (author)

  1. Obese subjects involvement in a population-based survey: the use of information and communication technologies (ICT) to avoid stigmatization.

    Science.gov (United States)

    Pétré, Benoit; Donneau, Anne-Françoise; Crutze, Céline; Husson, Eddy; Scheen, André; Guillaume, Michèle

    2015-05-01

    Epidemiological and health promotion studies in obese subjects are hampered by the difficulty of obtaining a representative sample from the community. The enrollment process can be at high risk of stigmatization. The purpose of this study is to describe an original information and communication technologies (ICT) strategy to get around these ethical and methodological difficulties. A multimedia campaign of communication was organized on the topic of overweight and quality of life (QoL). A specific website was developed to collect via a questionnaire QoL data as well as information related to patient's needs and health perception from participants. To promote the website, multiple information supports were largely diffused. Primary care professionals were solicited to enhance the enrollment. The campaign started with a press conference covered by the main television channels. The ICT-based approach allowed the participation of 4,155 subjects homogeneously distributed with respect to body mass index, age, gender and socioeconomic level. A high percentage of subjects fully completed the web-based questionnaire. The press conference allowed reaching a quarter of the total sample within 5 days. Overweight remains a major public health problem. This survey showed that a holistic approach supported by ICT is a promising way to recruit obese subjects without stigmatizing the disorder.

  2. The role of absorptive capactiy in technological learning in CDM projects : evidences from survey in Brazil, China, India and Mexico

    NARCIS (Netherlands)

    Doranova, A.; Costa, I.; Duysters, G.M.

    2011-01-01

    Technology transfer in Clean Development Mechanism (CDM) projects of the Kyoto Protocol has acquired increasing attention of policy makers and academia. This study is an effort to investigate CDM projects' related technology transfer process from the organisational learning and technological

  3. The role of absorptive capacity in technological learning in CDM projects : Evidences from survey in Brazil, China, India and Mexico

    NARCIS (Netherlands)

    Doranova, A.; Costa, I.; Duijsters, G.M.

    2011-01-01

    Technology transfer in Clean Development Mechanism (CDM) projects of the Kyoto Protocol has acquired increasing attention of policy makers and academia. This study is an effort to investigate CDM projects' related technology transfer process from the organisational learning and technological

  4. Report on surveys and researches to excavate international joint researches related to industrial technologies; Sangyo gijutsu ni kansuru kokusai kyodo kenkyu hakkutsu no tame no chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Five themes were taken up for a project of the 'surveys and researches to excavate international joint researches related to industrial technologies'. Investigation groups were organized and dispatched for each theme toperform domestic and overseas surveys. Discussions were given on eachtheme for the possibilities of structuring international joint researches. The five themes are as follows: 'wearable information network related technologies', wherein technologies to micronize information devices have been advanced rapidly, and the technologies are entering the age from personalizing and mobilizing the information into the wearable computing; this theme is intended to develop systems to unify these technologies by means of international joint researches: 'surveys on using unutilized animal oils and fats as chemical raw materials', which are intended to make clear possibilities and problems in utilizing animal oils and fats as raw materials for the chemical industry that can substitute fossil resources: 'international joint researches on new glasses' and 'processes to manufacture semiconductors using glassy carbon' to develop glassy carbon having excellent chemical resistance substituting quartz: and 'international joint researches on the Russian project which places environment and energy in its center'. (NEDO)

  5. FY 1998 report on the verification survey of geothermal exploration technology, etc. 2/2. Survey of deep geothermal resource; 1998 nendo chinetsu tansa gijutsu nado kensho chosa hokokusho. 2/2. Shinbu chinetsu shigen chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-12-01

    For the purpose of commercializing deep geothermal resource, a deep exploration well of 4000m class was drilled in the existing geothermal development area to survey the situation of deep geothermal resource existence and the availability. Concretely, the deep geothermal exploration well was drilled for study in the Kakkonda area, Shizukuishi town, Iwate prefecture, to clarify the situation of deep geothermal resource existence and the whole image of geothermal system. Consideration was made of the deep geothermal exploration method, systematization of deep high temperature drilling technology, and availability of deep geothermal resource. The results of the survey were summed up as follows: 1) general remarks; 2) deep exploration well drilling work; 3) details of the study. This report contained 3). In 3), the items were as follows: heightening of accuracy of the deep geothermal resource exploration method, making of a geothermal model in the Kakkonda area, study of deep drilling technology, study of deep fluid utilization technology, and making of a guide for deep geothermal resource exploration/development in the Kakkonda area. As to the technology of high temperature deep geothermal well drilling, studies were made of the borehole cooling method, mud water cooling method, survey of deterioration of casing with age, etc. (NEDO)

  6. Machine technology: a survey

    International Nuclear Information System (INIS)

    Barbier, M.M.

    1981-01-01

    An attempt was made to find existing machines that have been upgraded and that could be used for large-scale decontamination operations outdoors. Such machines are in the building industry, the mining industry, and the road construction industry. The road construction industry has yielded the machines in this presentation. A review is given of operations that can be done with the machines available

  7. User Interface Technology Survey.

    Science.gov (United States)

    1987-04-01

    Menu entries may be grouped and orgered Into menu hierarchies. AN levels of a hirarchy may be visible at once, or they may have to be navigated with...s t Xerox aw systemflla3. Ti ft"s lb m"k t system leble , ba it ls effective tis of1 iy some User 9101" SWsuc kaybosrdoeute usersome ssteMIS ( Apple Ma...r~stMiTemidndanodApple we tadaml no d Muaioh Isa tadsm macesd to Apple - ,pfr ftc ParSomPT In a beadue-nu of Adobe System lnooporstsd. Scdlbs Is a

  8. Report on survey in fiscal 2000 on the survey on succession of history of industrial technologies. Survey edition of originality and creativity of electric and electronic technologies in Japan; 2000 nendo sangyo gijutsu rekishi keisho chosa hokokusho. Kokunai sangyo no denki denshi gijutsu no dokusosei to sozosei no chosahen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    In order to clarify the innovation process of industrial technologies in Japan and the originality and creativity seen in that process to serve for the future development, hearing surveys have been performed. The persons being the hearing objects are Mr. Koichi Oshima who has researched the series capacitors for power transmission cables, Mr. Makoto Osatake who has researched the distortion in frequency modulation, and Mr. Hisao Oka who has researched the destruction phenomena in rectifier elements of power semiconductors. Mr. Hiroshi Inose and Mr. Toichiro Koike who have accepted the hearing survey were represented by the mourning statements due to their sudden death. The items of the questions in the hearing survey included: their home background, why have they studied electricity area specially?, determination criteria when they were forced to make a serious selection and the results thereof, examples of successes and failures and the age background, breakthrough points in the success cases, what they want to convey to future generations from their achievements, what they wished if they have done, methods of conveying the technologies, persons whom they respect as their teachers, existence of persons who have given them protection, sources of passion and motivation that supported the research life, and the principles toward the research. (NEDO)

  9. FY 2000 Report on the survey results. Report on the survey/study on development of technologies for aging societies; 2000 nendo koreika taio gijutsu kaihatsu ni kakawaru chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    The survey/study is conducted for (development of technologies for aging societies) by, e.g., the discussions at the (committee for investigating the technological development programs for activating the aging societies) and activities by the subordinate working groups, and the surveys on the aging societies and welfare-related technologies. The following results are obtained. The care-needing aged is not the sole stratum growing as a result of progress of the aging societies, because 87% of the aged can be self-supporting, needing no cares or other special aids. It is necessary to develop the industrial policies which combine the results of the promoted engineering research and development of the techniques/services for (active self-supporting) of the aged with the welfare-related equipment and services. It is also necessary to discuss the (technological development programs for activating the aging societies) through concerted efforts by the research organizations and industrial circles related to welfare equipment and government, to recognize their own roles. In these programs, acceleration and continuation of the technological development of the medical treatment/welfare equipment as one of the promising industrial areas are important. (NEDO)

  10. The Potential That Electronic Nicotine Delivery Systems Can be a Disruptive Technology: Results From a National Survey.

    Science.gov (United States)

    Pechacek, Terry F; Nayak, Pratibha; Gregory, Kyle R; Weaver, Scott R; Eriksen, Michael P

    2016-10-01

    This study evaluates the reasons for use and acceptance of Electronic Nicotine Delivery Systems (ENDS) among current and former cigarette smokers to assess if ENDS may become a satisfying alternative to cigarettes. Data are from a national probability sample of 5717 US adults, surveyed June-November 2014. The survey contained questions on awareness, usage, and reasons for use of traditional and novel tobacco products. The analytic sample was current and former smokers who ever used ENDS (n = 729) and was divided into four mutually exclusive categories. Among the 585 current smokers, 337 were no longer using ENDS ("E-Cig Rejecters"), and 248 were continuing to use both ENDS and cigarettes ("E-Cig Dual Users"). Among 144 former cigarette smokers, 101 were non-recent users of ENDS ("Quit All Products"), and 43 were continuing to use ENDS exclusively ("Switchers"). Former smokers (the "Switchers") report finding ENDS a satisfying alternative to regular cigarettes, with only 15.8% (95% confidence interval [CI] 4.4-27.1) rating ENDS as less enjoyable than regular cigarettes. However, greater than fivefold more current smokers did not find them satisfying and stopped using them (77.3%; 95% CI 72.1-82.4 of "E-Cig Rejecters" rated ENDS as less enjoyable). Being less harmful was the most highly rated reason for continuing to use ENDS among "Switchers." Most (80.9%) "Switchers" reported that ENDS helped them quit cigarettes. Since many current smokers who have tried ENDS reject them as a satisfying alternative to regular cigarettes, ENDS will not replace regular cigarettes unless they improve. Since about one-half of recent former smokers are trying ENDS with about one-fourth continuing to use them, and many reporting that these products have helped them quit regular cigarettes, the potential impact of ENDS on population quit rates deserves continued surveillance. However, since most current smokers who have tried ENDS reject them as a satisfying alternative to regular

  11. Survey on the long-term energy technology strategy. 2. Survey of the basement of the industrial technology strategy settlement (Environmental basement arrangement strategy); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa. 2. Sangyo gijutsu senryaku sakutei kiban chosa (kankyo kiban seibi senryaku)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    For the Japanese industry to cope properly with the age of great competition and to secure the technology competitive force, it is indispensable to collect/analyze a lot of information and develop policies, that is, strategies, for industrial technology. For study of types of technology innovation system, a survey was conducted in FY 1999 of samples of products with comparatively high competitive force. Concept of the product concerned was examined in terms of the enterprise (person) which created the product, enterprise which commercialized it first in the world, etc. As to each of the technologies, factors to get a top share were analyzed. Based on the analyses, factors to get a large share were classified, and the relations with technology were analyzed. With 'Study of industrial technology strategy' issued in March 1999 as reference, 54 of the products of which the world share is more than 75% were extracted. In the table, about the items on creation of technology, technology was classified into the basic technology, similar technology, traditional technology, and combined technology. About the items on improvement/application, it was classified into improvement and usage development. The other items were classified into production technology, users, and development/production cooperation infrastructure. (NEDO)

  12. Technology and Social Media Use Among Patients Enrolled in Outpatient Addiction Treatment Programs: Cross-Sectional Survey Study.

    Science.gov (United States)

    Ashford, Robert D; Lynch, Kevin; Curtis, Brenda

    2018-03-06

    Substance use disorder research and practice have not yet taken advantage of emerging changes in communication patterns. While internet and social media use is widespread in the general population, little is known about how these mediums are used in substance use disorder treatment. The aims of this paper were to provide data on patients' with substance use disorders mobile phone ownership rates, usage patterns on multiple digital platforms (social media, internet, computer, and mobile apps), and their interest in the use of these platforms to monitor personal recovery. We conducted a cross-sectional survey of patients in 4 intensive outpatient substance use disorder treatment facilities in Philadelphia, PA, USA. Logistic regressions were used to examine associations among variables. Survey participants (N=259) were mostly male (72.9%, 188/259), African American (62.9%, 163/259), with annual incomes less than US $10,000 (62.5%, 161/259), and averaged 39 (SD 12.24) years of age. The vast majority of participants (93.8%, 243/259) owned a mobile phone and about 64.1% (166/259) owned a mobile phone with app capabilities, of which 85.1% (207/243) accessed the internet mainly through their mobile phone. There were no significant differences in age, gender, ethnicity, or socio-economic status by computer usage, internet usage, number of times participants changed their phone, type of mobile phone contract, or whether participants had unlimited calling plans. The sample was grouped into 3 age groups (Millennials, Generation Xers, and Baby Boomers). The rates of having a social media account differed across these 3 age groups with significant differences between Baby Boomers and both Generation Xers and Millennials (Psocial media account (73.6%, 190/259), most (76.1%, 144/190) reported using it daily and nearly all (98.2%, 186/190) used Facebook. Nearly half of participants (47.4%, 90/190) reported viewing content on social media that triggered substance cravings and an

  13. Technology.

    Science.gov (United States)

    Online-Offline, 1998

    1998-01-01

    Focuses on technology, on advances in such areas as aeronautics, electronics, physics, the space sciences, as well as computers and the attendant progress in medicine, robotics, and artificial intelligence. Describes educational resources for elementary and middle school students, including Web sites, CD-ROMs and software, videotapes, books,…

  14. Health information exposure from information and communication technologies and its associations with health behaviors: Population-based survey.

    Science.gov (United States)

    Shen, Chen; Wang, Man Ping; Wan, Alice; Viswanath, Kasisomayajula; Chan, Sophia Siu Chee; Lam, Tai Hing

    2018-08-01

    Health information and communication technologies (ICTs) are increasingly used but little is known about routine exposure to health information from ICTs and its associations with health behaviors. A territory-wide population-based dual landline and mobile telephone survey was conducted in 2016 in Hong Kong, where smartphone ownership and Internet access are among the most prevalent, easiest and fastest in the world. Health information exposure from traditional sources (television/radio/newspaper/magazine), Internet websites, social media sites and instant messaging (IM); and information on smoking, alcohol consumption and physical activity were recorded. Prevalence was weighted by age, sex and education level of the general population. Multinomial logistic regression was used to assess the association of health information exposure with smoking and alcohol consumption, whilst multivariable linear regression was used to assess the association with frequency of moderate and vigorous physical activity (days/week). Of 3063 respondents, most (71.6%) were often or sometimes exposed to health information from traditional sources, followed by Internet websites (40.9%), social media sites (40.7%), and IM (27.0%). Respondents with lower education and household income were less frequently exposed to health information from Internet websites, social media sites and IM (all P < 0.001). Health information exposure from IM was associated with being never smokers, and more frequent moderate and vigorous physical activity (all P for trend <0.05). Health information exposure from IM was least frequent but associated with healthier behaviors. Further public health education campaigns can consider using IM to deliver information, particularly to disadvantaged groups. Copyright © 2018 Elsevier Inc. All rights reserved.

  15. Report on the FY 1999 survey on long-term energy technology strategy/basic survey for working out industrial technology strategy. Part 1. Technology strategy by field - material technology field (fine ceramics technology field); 1999 nendo choki energy gijutsu senryaku ni kansuru chosa. 1. Sangyo gijutsu senryaku sakutei kiban chosa (bun'yabetsu gijutsu senryaku (zairyo gijutsu bun'ya (fine ceramics gijutsu bun'ya)))

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    The paper described the results of the survey of the fine ceramics technology field relating to the FY 1999 long-term energy technology strategy. The fine ceramics industry is a new industry for which the future development is expected. It has far-reaching effects on other industries. Japan has the advantage over other countries. As subjects to remarkably develop the industry, needed are the long-term basic preparation which promotes technology innovation such as the promotion of the fundamental/creative R and D, construction of an industry/university liaison system, and arrangement of the intellectual base. Preparation of the competitive environment and promotion of policies paying attention to the market are needed which make the development under the private control by creative study/corporate activities possible. Also important are the demonstration of leadership and secure international competitive force in the light of Japan's international position. For the private-control development, the role and course of various groups should be made clear from a long-term aspect. It is desirable that university/government will newly develop innovative technology, and industry will make the present technology force more developmental and competitive. Support from the nation is requested for researches large in scale. (NEDO)

  16. Fiscal 2000 survey and research achievement report on the survey and research on next-generation EUVL (extreme ultraviolet lithography) technology; 2000 nendo jisedai EUVL (Extreme Ultra-Violet Lithography) gijutsu chosa kenkyu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    While surveys of technical progress and tasks of EUVL in Japan and overseas are under way for submitting a proposition for the industrialization of EUVL technology by expatiating the results of the EUVL research and development program scheduled to be complete in fiscal 2001, the future of EUVL is considered. The survey results are summarized in five chapters which involve (1) the outlines of survey and research results, (2) technical trends of lithography, (3) systems for EUVL research and development in the world, and (5) the conclusion. In chapter (4), light sources, systems (exposure devices), masks, resists, and other element technologies are investigated. The survey results about light sources involve the background against which their development is described, performance that an extreme ultraviolet ray source is requested to have, candidate EUVL light sources, their technical features and tasks they present, and the latest trends overseas. Concerning the exposure device, the body (device constitution), stage, sensor, projection system, and the irradiation system are investigated. As for masks, the outline of a EUVL mask, masking substrate, multilayer film fabrication, masking pattern formation, and other tasks for development are investigated. (NEDO)

  17. Study on a Preliminary Survey and Analysis of HLW Management Technology Suitable for Nuclear Industrial Environment in Korea

    International Nuclear Information System (INIS)

    Kim, Eun Ka; Suh, In Suk; Ro, Seong Gy; Yoo, Kun Joong; Yoo, Jae Hyung; Cho, Sung Soo

    2010-12-01

    The purpose of this study is to suggest development direction of related technologies to analyze patented technology filed as a leading technology and to identify the technology trend for developing HLW management technology suitable for atomic industrial environment in Korea. For patent analysis of HLW management technology, international patent data were collected. And international application number, patent share of applicant and nationality, annual number of applications, application trends of assignees and detail technology, and frequency of patent citations / citations-to were analyzed by statistical analysis. Technical level and competitiveness through quantitative analysis by indicators of patent analysis were confirmed. And technology developments of blank technology, similarity analysis, the point of the main patent and a range of patent rights were analyzed through in-depth analysis. Trends of the patented technology of our country and world patent technology in such results have been identified, and statistical data on patents were secured. Especially in HLW management technology, patent application in Korea compared ti United States, Japan and European Union was began much later for the '90s, and are showing the annual increase on trend of patent application. Patent trend in Korea corresponds to development generation, while declining in foreign patent. The result of this study will be usefully applied to setting a development direction and blank technology of patent technology to pursue future in Korea

  18. Survey on the technological development issues for large-scale methanol engine power generation plant; Ogata methanol engine hatsuden plant ni kansuru gijutsu kaihatsu kadai chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-03-01

    Based on the result of `Survey on the feasibility of large-scale methanol engine power generation plant` in fiscal 1992, concrete technological development issues were studied for its practical use, and the technological R & D scheme was prepared for large-scale methanol engine power plant featured by low NOx and high efficiency. Technological development issues of this plant were as follows: improvement of thermal efficiency, reduction of NOx emission, improvement of the reliability and durability of ignition and fuel injection systems, and reduction of vibration. As the economical effect of the technological development, the profitability of NOx control measures was compared between this methanol engine and conventional heavy oil diesel engines or gas engines. As a result, this engine was more economical than conventional engines. It was suggested that development of the equipment will be completed in nearly 4 years through every component study, single-cylinder model experiment and real engine test. 21 refs., 43 figs., 19 tabs.

  19. Verification study on technology for site investigation for geological disposal. Confirmation of the applicability of survey methods through establishing site descriptive models in accordance with stepwise investigation approach

    International Nuclear Information System (INIS)

    Kondo, Hirofumi; Suzuki, Koichi; Hasegawa, Takuma; Hamada, Takaomi; Yoshimura, Kimitaka

    2014-01-01

    The Yokosuka Demonstration and Validation Project, which uses the Yokosuka Central Research Institute of Electric Power Industry (CRIEPI) site, a Neogene sedimentary and coastal environment, has been conducted since the 2006 fiscal year as a cooperative research project between NUMO (Nuclear Waste Management Organization of Japan) and CRIEPI. The objectives of this project were to examine and refine the basic methodology of the investigation and assessment in accordance with the conditions of geological environment at each stage of investigations from the surface (Preliminary Investigation and the first half of Detailed Investigation conducted by NUMO) for high level radioactive waste geological disposal. Within investigation technologies at these early stages, a borehole survey is an important means of directly obtaining various properties of the deep geological environment. On the other hand, surface geophysical prospecting data provide information about the geological and resistivity structures at depth for planning borehole surveys. During the 2006-2009 fiscal years, a series of on-site surveys and tests, including borehole surveys of YDP-1 (depth: 350 m) and YDP-2 (depth: 500 m), were conducted in this test site. Furthermore, seismic surveys (including seismic reflection method) and electromagnetic surveys (including magnetotelluric method) were conducted within the expanded CRIEPI site in the 2010 fiscal year to obtain information about the geological structure, and the resistivity structure reflecting the distribution of the salt water/fresh water boundary, respectively, to a depth of over several hundred meters. The validity of existing survey and testing methods for stepwise investigations (from surface to borehole surveys) for obtaining properties of the geological environment (in various conditions relating to differences in the properties of the Miura and the Hayama Groups at this site) was confirmed through establishing site descriptive models based on

  20. Fiscal 1999 survey report. Survey of feasibility of international cooperation in the transfer of technology; 1999 nendo gijutsu iten ni kakawaru kokusai kyoryoku kanosei chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Among the activity goals of CTI (climate technology initiative), which is a framework designed to encourage international cooperation of leading nations in the voluntary development and diffusion of technologies supposed to contribute to the reduction of greenhouse gas emissions, there is the promotion of the transfer and diffusion of climate change preventing technologies. To achieve the goal, energy efficiency oriented workshops will be held as part of the training for the raising of people skilled in energy saving, the results will be examined, the achievements attained at such events will be introduced at COP5 (Conference of the Parties at Bonn), and the responses of the respective countries will be reviewed, all these for the investigation of the feasibility of international cooperation for raising people dedicated to the reduction of greenhouse gas emission. In this fiscal year, aiming to make clear the possibility of contribution to the transfer of software-related technologies through cooperation of multiple nations, lecturers from leading countries and participants from developing nations met, held a workshop over energy efficiency technologies, and the results were compiled. (NEDO)

  1. Leading survey and research report for fiscal 1999. Survey and research on 3-dimensional ion beam processing technology; 1999 nendo sanjigen ion kokan gijutsu no chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Application of ion beam processing to 2-dimensional shapes in the past has been limited to flat shapes or small areas. There is a 3-dimensional plasma-based ion implantation (PBII) technology for which high-density plasma is generated using plural metal ion sources and gas ion sources for the application of pulse voltages. Using this technology, ions are implanted into intricate shapes, large areas, and surfaces of 3-dimensional shapes, and surface reforming is accomplished through thin film formation. It is low in cost and high in productivity, and finds a great demand for use in the fabrication of members of large and complicated engines for automobiles, spacecraft, and aircraft, members of precision machines, and members of electric power facilities and chemical plants where high resistance to abrasion, corrosion, and heat are mandatory. Research and development for its practical application, however, has just started and, before its commercialization, technologies have to be completed involving surface treatment using gas plasma for ion implantation, thin film formation using metal ion plasma, and their hybrid. Similarly important is the technology of generating homogenous plasma. This new technology is expected to enhance economic efficiency, provide means to deal with environmental matters, and improve on energy efficiency. An outline of the proposition for the project is compiled in this report. (NEDO)

  2. Survey and research for the enhancement of large-scale technology development 1. Japan's large-scale technology development and the effects; Ogata gijutsu kaihatsu suishin no tame no chosa kenkyu. 1. Nippon no daikibo gijutsu kaihatsu to sono koka

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1981-03-01

    A survey is conducted into the effects of projects implemented under the large-scale industrial technology research and development system. In the development of 'ultraperformance computers,' each of the technologies is being widely utilized, and the data service system of Nippon Telegraph and Telephone Public Corporation and the large computer (HITAC8800) owe much for their success to the fruits of the development endeavor. In the development of the 'desulfurization technology,' the fruits are in use by Tokyo Electric Power Co., Inc., and Chubu Electric Power Co., Inc., incorporated into their desulfurization systems. Although there is no practical plant based on the 'great-depth remotely controlled submarine oil drilling rig,' yet oceanic technologies and control methods are being utilized in various fields. The 'seawater desalination and by-product utilization' technologies have enabled the establishment of technologies of the top level in the world thanks to the resultant manufacture of concrete evaporator and related technologies. Eleven plants have been completed utilizing the fruits of the development. In the field of 'electric vehicle,' there is no commercialization in progress due to problems in cost effectiveness though remarkable improvement has been achieved in terms of performance. Technologies about weight reduction, semiconductor devices, battery parts and components, etc., are being utilized in many fields. (NEDO)

  3. Environmentally-friendly oxygen-free roasting/wet magnetic separation technology for in situ recycling cobalt, lithium carbonate and graphite from spent LiCoO{sub 2}/graphite lithium batteries

    Energy Technology Data Exchange (ETDEWEB)

    Li, Jia; Wang, Guangxu; Xu, Zhenming, E-mail: zmxu@sjtu.edu.cn

    2016-01-25

    Highlights: • The idea of “waste + waste → resources.” was used on this study. • Based on thermodynamic analysis, the possible reaction between LiCoO{sub 2} and graphite was obtained. • The residues of oxygen-free roasting are cobalt, lithium carbonate and graphite. • The recovery rate of Co and Li is 95.72% and 98.93% after wet magnetic separation. • It provides the rationale for environmental-friendly recycling spent LIBs in industrial-scale. - Abstract: The definite aim of the present paper is to present some novel methods that use oxygen-free roasting and wet magnetic separation to in situ recycle of cobalt, Lithium Carbonate and Graphite from mixed electrode materials. The in situ recycling means to change waste into resources by its own components, which is an idea of “waste + waste → resources.” After mechanical scraping the mixed electrode materials enrich powders of LiCoO{sub 2} and graphite. The possible reaction between LiCoO{sub 2} and graphite was obtained by thermodynamic analysis. The feasibility of the reaction at high temperature was studied with the simultaneous thermogravimetry analysis under standard atmospheric pressure. Then the oxygen-free roasting/wet magnetic separation method was used to transfer the low added value mixed electrode materials to high added value products. The results indicated that, through the serious technologies of oxygen-free roasting and wet magnetic separation, mixture materials consist with LiCoO{sub 2} and graphite powders are transferred to the individual products of cobalt, Lithium Carbonate and Graphite. Because there is not any chemical solution added in the process, the cost of treating secondary pollution can be saved. This study provides a theoretical basis for industrial-scale recycling resources from spent LIBs.

  4. Leading survey and research report for fiscal 1999. Survey and research on advanced design technology for electronic system; 1999 nendo electronics kiki sekkeiryoku kyoka gijutsu no chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    The efforts center on techniques for optimizing the designing process of the system-on-chip (SoC) which assumes the most important part in the technology involved. An SoC is a system in which most of the system-constituting functions are integrated on a single chip, whose design is growing increasingly difficult to prepare because its circuitry containing complicated functions is growing larger in scale at an annual rate of 58%. Its elements are growing microstructural at a sharp pace, and a very optimum designing technique is required to deal with the development. Under the circumstances, the numbers of engineers and man-hours required to cope with the situation are increasing exponentially. The improvement of design productivity at the present time stays at a low annual rate of 21%. Surveyed are the background, objective, and necessity of the research and development of technologies for the whole designing process consisting of the function designing stage which is of the highest level, the logical circuit designing stage, and the manufacturing process designing stage. Furthermore, the current status, research, and development of related technologies and the status of related patents in Japan and overseas are surveyed. Studies are also conducted about the goals of technologies to be developed and about breakthrough points before achieving the goals, and a development project is assumed and proposed. (NEDO)

  5. Report on the achievements in fiscal 1999. Surveys on the foundation for establishing industrial technology strategies (Foundation and environment improving strategies - an overall survey); 1999 nendo sangyo gijutsu senryaku sakutei kiban chosa hokokusho. Kiban kankyo seibi senryaku (zentai chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Surveys were performed on the foundation for technological innovation in Japan and other countries. Main findings obtained from the actual state survey were compiled from the two aspects of 'items having difference in international comparison' and 'main findings by nucleuses and functions'. In order to activate the economy stagnated in the 1980's, America has developed strong industrial technology policies under the initiative of the government to strengthen the competitive edge, and the result thereof appears linking with the briskness in the today's U.S. economy. In Japan, the non-competitive fund distributed uniformly to national universities and national research institutes accounts for the majority in the governmental research fund. In contrast, many of the research funds of the U.S. government are the competitive fund, whereas researchers perform their research works using these funds, including their own labor cost, and the competition is intense. America is regarded to have put a huge amount of national defense research expense and space development research expense into private business entities, which are playing a large role in developing advanced technologies. A great amount of governmental fund is injected concentratedly into researches of health, medical and bio-technologies. (NEDO)

  6. Report on the achievements in fiscal 1999. Surveys on the foundation for establishing industrial technology strategies (Foundation and environment improving strategies - an overall survey); 1999 nendo sangyo gijutsu senryaku sakutei kiban chosa hokokusho. Kiban kankyo seibi senryaku (zentai chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Surveys were performed on the foundation for technological innovation in Japan and other countries. Main findings obtained from the actual state survey were compiled from the two aspects of 'items having difference in international comparison' and 'main findings by nucleuses and functions'. In order to activate the economy stagnated in the 1980's, America has developed strong industrial technology policies under the initiative of the government to strengthen the competitive edge, and the result thereof appears linking with the briskness in the today's U.S. economy. In Japan, the non-competitive fund distributed uniformly to national universities and national research institutes accounts for the majority in the governmental research fund. In contrast, many of the research funds of the U.S. government are the competitive fund, whereas researchers perform their research works using these funds, including their own labor cost, and the competition is intense. America is regarded to have put a huge amount of national defense research expense and space development research expense into private business entities, which are playing a large role in developing advanced technologies. A great amount of governmental fund is injected concentratedly into researches of health, medical and bio-technologies. (NEDO)

  7. FY 1998 survey report. Industrial technology history/succession survey (Survey of originality and creativity of machinery technology of the Japanese industry); 1998 nendo chosa hokokusho. Sangyo gijutsu rekishi keisho chosa (kokunai sangyo kikai gijutsu no dokusosei to sozosei no chosahen)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    From a viewpoint of long-term development/creative R and D promotion of the industrial technology of Japan, this survey clarifies where there are originality/creativity for technological innovations of Japan and contributes to selecting future technical themes and working out developmental methods. Aiming at succeeding to the industrial technology, this report arranges the results of the examinational research on machinery technology legacy conducted in FY 1998. The total number of registration is 530. The items of classification are as follows: machine tool (cutting processing, plastic processing), power/energy machine (external combustion engine, internal combustion engine, fluid machine, generator/motor), traffic machine (automobile, rolling stock, ship, aircraft, bicycle), industrial machine 1 (iron/steel-making machine, casting machine, mining machine, food producing machine, woodworking machine, textile machine, paper-making machine, printing machine, chemical machine), industrial machine 2 (agriculture/forestry/fisheries machine, civil engineering/construction machine, medical machine, ceramics machine), measuring device/experimental equipment (measuring device, experimental device, design device, machine watch/calculator), machine structure (plant, bridge), etc. (NEDO)

  8. CoJet technology for oxygen injection injection in EAFS - industrial gases supply and customers productivity improvements; Tecnologia CoJet para injecao de oxigenio em FEAS - fornecimento de gases e aumento da produtividade dos clientes

    Energy Technology Data Exchange (ETDEWEB)

    Marques, Izaias Lucas; Zagury, Pedro Athias [White Martins Gases Industriais Ltda., Rio de Janeiro, RJ (Brazil)

    2010-07-01

    PRAXAIR is one of the largest industrial gases producers of the World, being present in more than 40 countries and strongly connected to the steel industry. PRAXAIR has experience to supply products and services to all kinds of steel mills. Several technologies developed by the Company, such as CoJet (a system to coherent oxygen jet injection in EAF and BOF furnaces), Slag Splashing (splashing slag to cover BOF furnaces walls increasing refractory wear campaign life), AOD (a process for specialty steel production) and others, are currently in commercial operation in different parts of the world. In Brazil, Praxair is the owner of White Martins, the largest industrial gases company in South America, present in nine countries of the continent. Company's portfolio includes atmospheric gases, carbonic gas production, acetylene, hydrogen, specialty and health and care gases, mixtures for welding, gas seamless steel cylinders, applications equipment, and storage and gases transportation. The Company also operates a natural gas liquefaction unit. In addition to technologies and process, Praxair / White Martins can also supply solutions for measurement, control and gases injection, according to strict safety and quality standards. The present work has the objective to show the benefits of the CoJet EAF System, oxygen injectors positioned in the furnace walls. In 2009, two systems have been installed in South American mills and the results achieved will be following discussed. (author)

  9. A Cabin Air Separator for EVA Oxygen

    Science.gov (United States)

    Graf, John C.

    2011-01-01

    Presently, the Extra-Vehicular Activities (EVAs) conducted from the Quest Joint Airlock on the International Space Station use high pressure, high purity oxygen that is delivered to the Space Station by the Space Shuttle. When the Space Shuttle retires, a new method of delivering high pressure, high purity oxygen to the High Pressure Gas Tanks (HPGTs) is needed. One method is to use a cabin air separator to sweep oxygen from the cabin air, generate a low pressure/high purity oxygen stream, and compress the oxygen with a multistage mechanical compressor. A main advantage to this type of system is that the existing low pressure oxygen supply infrastructure can be used as the source of cabin oxygen. ISS has two water electrolysis systems that deliver low pressure oxygen to the cabin, as well as chlorate candles and compressed gas tanks on cargo vehicles. Each of these systems can feed low pressure oxygen into the cabin, and any low pressure oxygen source can be used as an on-board source of oxygen. Three different oxygen separator systems were evaluated, and a two stage Pressure Swing Adsorption system was selected for reasons of technical maturity. Two different compressor designs were subjected to long term testing, and the compressor with better life performance and more favorable oxygen safety characteristics was selected. These technologies have been used as the basis of a design for a flight system located in Equipment Lock, and taken to Preliminary Design Review level of maturity. This paper describes the Cabin Air Separator for EVA Oxygen (CASEO) concept, describes the separator and compressor technology trades, highlights key technology risks, and describes the flight hardware concept as presented at Preliminary Design Review (PDR)

  10. Fiscal 1995 verification survey of geothermal exploration technology. Report on a deep geothermal resource survey; 1995 nendo chinetsu tansa gijutsu nado kensho chosa. Shinbu chinetsu shigen hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-06-01

    For the purpose of reducing the risk of deep geothermal resource development, the paper investigated three factors for the formation of geothermal resource in the deep underground, that is, heat supply from heat source, supply of geothermal fluids, and the developmental status of fracture systems forming reservoir structures. The survey further clarified the status of existence of deep geothermal resource and the whole image of the geothermal system including shallow geothermal energy in order to research/study usability of deep geothermal resource. In the deep geothermal resource survey, drilling/examination were made of a deep geothermal exploration well (`WD-1,` target depth: approximately 3,000-4,000m) in the already developed area, with the aim of making rationalized promotion of the geothermal development. And the status of existence of deep geothermal resource and the whole image of the geothermal system were clarified to investigate/study usability of the geothermal system. In fiscal 1995, `WD-1` in the Kakkonda area reached a depth of 3,729m. By this, surveys were made to grasp the whole image of the shallow-deep geothermal system and to obtain basic data for researching usability of deep geothermal resource. 22 refs., 531 figs., 136 tabs.

  11. Fiscal 1999 technical survey report. Survey of energy conservation technologies in Japan; 1999 nendo kokunai no sho energy gijutsu ni kansuru chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    NEDO (New Energy and Industrial Technology Development Organization), in its effort to implement a joint project with importing countries, endeavors to popularize energy conservation technologies by introducing them into plants in the importing countries and by demonstrating their validity on real systems. Energy conservation technologies in use in Japan's steelmaking, cement making, chemical, and oil refining industries were reassessed in view of their usefulness in the above-said project. During the reassessment, they were analyzed also for cost effectiveness for the scales on which they would possibly be introduced. Ninety-four technologies were reassessed, which involved the top pressure recovery facilities, continuous casting facilities, high frequency melting furnace, and high efficiency sintering furnace ignition device, these for the steelmaking industry; the materials crushing vertical roller mill, NSP (new suspension preheater) type cement calcination kiln, finishing process preliminary crusher, urban wastes conversion into materials for cement making or into fuel, these for the cement making industry; the multi-effect evaporator for an ammonia manufacturing process and the device for collecting waste heat at the outlet of a synthetic gas compressor, these for the chemical industry; and reduction in the amount of injection steam by use of vacuum distillation tower top steam recycling, etc., these in relation with oil refining facilities. (NEDO)

  12. Survey on the Sources of Information in Science, Technology and Commerce in the State of Penang, Malaysia

    Science.gov (United States)

    Tee, Lim Huck; Fong, Tang Wan

    1973-01-01

    Penang, Malaysia is undergoing rapid industrialization to stimulate its economy. A survey was conducted to determine what technical, scientific, and commercial information sources were available. Areas covered in the survey were library facilities, journals, commercial reference works and audio-visual materials. (DH)

  13. Technology

    Directory of Open Access Journals (Sweden)

    Xu Jing

    2016-01-01

    Full Text Available The traditional answer card reading method using OMR (Optical Mark Reader, most commonly, OMR special card special use, less versatile, high cost, aiming at the existing problems proposed a method based on pattern recognition of the answer card identification method. Using the method based on Line Segment Detector to detect the tilt of the image, the existence of tilt image rotation correction, and eventually achieve positioning and detection of answers to the answer sheet .Pattern recognition technology for automatic reading, high accuracy, detect faster

  14. UAV-Based Photogrammetry and Integrated Technologies for Architectural Applications—Methodological Strategies for the After-Quake Survey of Vertical Structures in Mantua (Italy)

    Science.gov (United States)

    Achille, Cristiana; Adami, Andrea; Chiarini, Silvia; Cremonesi, Stefano; Fassi, Francesco; Fregonese, Luigi; Taffurelli, Laura

    2015-01-01

    This paper examines the survey of tall buildings in an emergency context like in the case of post-seismic events. The after-earthquake survey has to guarantee time-savings, high precision and security during the operational stages. The main goal is to optimize the application of methodologies based on acquisition and automatic elaborations of photogrammetric data even with the use of Unmanned Aerial Vehicle (UAV) systems in order to provide fast and low cost operations. The suggested methods integrate new technologies with commonly used technologies like TLS and topographic acquisition. The value of the photogrammetric application is demonstrated by a test case, based on the comparison of acquisition, calibration and 3D modeling results in case of use of a laser scanner, metric camera and amateur reflex camera. The test would help us to demonstrate the efficiency of image based methods in the acquisition of complex architecture. The case study is Santa Barbara Bell tower in Mantua. The applied survey solution allows a complete 3D database of the complex architectural structure to be obtained for the extraction of all the information needed for significant intervention. This demonstrates the applicability of the photogrammetry using UAV for the survey of vertical structures, complex buildings and difficult accessible architectural parts, providing high precision results. PMID:26134108

  15. UAV-Based Photogrammetry and Integrated Technologies for Architectural Applications—Methodological Strategies for the After-Quake Survey of Vertical Structures in Mantua (Italy

    Directory of Open Access Journals (Sweden)

    Cristiana Achille

    2015-06-01

    Full Text Available This paper examines the survey of tall buildings in an emergency context like in the case of post-seismic events. The after-earthquake survey has to guarantee time-savings, high precision and security during the operational stages. The main goal is to optimize the application of methodologies based on acquisition and automatic elaborations of photogrammetric data even with the use of Unmanned Aerial Vehicle (UAV systems in order to provide fast and low cost operations. The suggested methods integrate new technologies with commonly used technologies like TLS and topographic acquisition. The value of the photogrammetric application is demonstrated by a test case, based on the comparison of acquisition, calibration and 3D modeling results in case of use of a laser scanner, metric camera and amateur reflex camera. The test would help us to demonstrate the efficiency of image based methods in the acquisition of complex architecture. The case study is Santa Barbara Bell tower in Mantua. The applied survey solution allows a complete 3D database of the complex architectural structure to be obtained for the extraction of all the information needed for significant intervention. This demonstrates the applicability of the photogrammetry using UAV for the survey of vertical structures, complex buildings and difficult accessible architectural parts, providing high precision results.

  16. UAV-Based Photogrammetry and Integrated Technologies for Architectural Applications--Methodological Strategies for the After-Quake Survey of Vertical Structures in Mantua (Italy).

    Science.gov (United States)

    Achille, Cristiana; Adami, Andrea; Chiarini, Silvia; Cremonesi, Stefano; Fassi, Francesco; Fregonese, Luigi; Taffurelli, Laura

    2015-06-30

    This paper examines the survey of tall buildings in an emergency context like in the case of post-seismic events. The after-earthquake survey has to guarantee time-savings, high precision and security during the operational stages. The main goal is to optimize the application of methodologies based on acquisition and automatic elaborations of photogrammetric data even with the use of Unmanned Aerial Vehicle (UAV) systems in order to provide fast and low cost operations. The suggested methods integrate new technologies with commonly used technologies like TLS and topographic acquisition. The value of the photogrammetric application is demonstrated by a test case, based on the comparison of acquisition, calibration and 3D modeling results in case of use of a laser scanner, metric camera and amateur reflex camera. The test would help us to demonstrate the efficiency of image based methods in the acquisition of complex architecture. The case study is Santa Barbara Bell tower in Mantua. The applied survey solution allows a complete 3D database of the complex architectural structure to be obtained for the extraction of all the information needed for significant intervention. This demonstrates the applicability of the photogrammetry using UAV for the survey of vertical structures, complex buildings and difficult accessible architectural parts, providing high precision results.

  17. Survey report for fiscal 1998. Survey of trends of new CO{sub 2} fixation technology using bacteria and algae (II); 1998 nendo chosa hokokusho. Saikin sorui wo riyoshita atarashii nisanka tanso kotei gijutsu no doko chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The trend of technology is surveyed from a standpoint that, in the process of CO2 fixation using microbes for the production of useful substances, it is essential, in view of income/outgo balance and economy, to utilize their catalytic function. The survey centers about the feasibility of the utilization of organic wastes, cellulose wastes in particular, as an energy source. Special attention is paid to the energy of artificial light and laser beams. From a point of view that it is important to suppress cell multiplication and to effectively utilize only catalytic activity for the production of useful substances, the cell division mechanism of the Corynebacterium is analyzed, and the findings are compiled to facilitate the study as to whether the division may be controlled. A report is also prepared on the metabolic mechanism of a photosynthesizing bacterium that is judged to be the most promising species. Reference is made to aerobic and anaerobic bacteria. Shown are the organic compounds that are formed by CO2 gas fixation thanks to microbial or enzymatic reactions. To emphasize their importance as an energy source and to explain the conversion of biomass into useful substances, the technology and economy of conversion into fuel compounds are surveyed. The production of ethanol out of organic wastes is evaluated in the way of LCA (life cycle assessment). (NEDO)

  18. Evaluation of biomethane technologies in Europe – Technical concepts under the scope of a Delphi-Survey embedded in a multi-criteria analysis

    International Nuclear Information System (INIS)

    Billig, Eric; Thrän, Daniela

    2016-01-01

    Methane from biomass is a well suited renewable energy carrier with a wide range of applications. The main technologies for its production out of biomass are biochemical conversion from the upgrading of biogas and thermochemical conversion by gasification and methanation. Presently there exists no methodology to compare the process alternatives for methane production from biomass. This paper investigates a comprehensive evaluation method based on a multi-criteria analysis. Due to the comparable well developed biomethane market in Europe, compared to other regions in the world, the study area was restricted to Europe. The weighting of the different criteria is carried out in two rounds as a pair-to-pair comparison of the criteria by experts from different technology fields in a Delphi-Survey. As a result, the prioritisation can be used to classify the biomass conversion technologies to convert biomass to biomethane. According to the weightings given by experts, the two criteria energy efficiency and production costs are of great importance compared to the other criteria. - Highlights: • Overview of technologies for renewable methane (biochemical and thermochemical). • Overview of multi-criteria analysis. • Novel methodology for comparison of biochemical and thermochemical conversion. • Delphi-Survey (approach and evaluation) in the field of biomethane resp. bio-SNG.

  19. Leading survey and research report for fiscal 1999. New technology based on functions involved in intracellular protein transport; 1999 nendo saibonai tanpakushitsu yuso kino riyo gijutsu kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    An intercellular transport technology (artificial manipulation of an intracellular protein transport system in eucaryotes) is studied for the accumulation of cytotoxic proteins, whose expression has so far been difficult, and activated proteins, which have avoided decomposition, in appropriate intracellular minute organs. The aim is to construct a system to allow foreign proteins high in productivity and quality to express themselves for production in eucaryotes. Basic surveys were conducted of the intracellular biological functions of single-membrane organelles (endoplasmic reticulum, peroxisome, vacuole/lysosome, and Golgi body), the molecular mechanism of protein transport to each organelle, and protein activation and quality control, and element technologies were extracted. For the development of novel pharmaceuticals making use of the intracellular protein transport technology, an activated protein production system was built and a search was made for transport activity impeding substances. Research tasks relative to the development of the new technologies were isolated, such as the visualization of intercellular transport. A survey was made of the market for pharmaceuticals, cosmetics, enzymes, and visualizing equipment (fluorescence microscope provided with new functions), etc. (NEDO)

  20. Survival Outcomes Following the Use of Extracorporeal Membrane Oxygenation as a Rescue Technology in Critically Ill Patients: Results From Pennsylvania 2007-2015.

    Science.gov (United States)

    Huesch, Marco D; Foy, Andrew; Brehm, Christoph

    2018-01-01

    To examine real-world outcomes of survival, length of stay, and discharge destination, among all adult extracorporeal membrane oxygenation admissions in one state over nearly a decade. Retrospective analysis of administrative discharge data. State-wide administrative discharge data from Pennsylvania between 2007 and 2015. All 2,948 consecutive patients billed under a Diagnosis-Related Grouper 3 grouper and in whom a procedural code for extracorporeal membrane oxygenation was present, admitted between the beginning of 2007 and the end of 2015 to hospitals regulated by the state of Pennsylvania. Admitting diagnoses were coded as respiratory, cardiac, cardiac arrest, or uncategorized based on administrative data. Unadjusted in-hospital mortality, length of stay, and discharge destination. Summary statistics and tests of differences by age 65 years or older and by admitting diagnosis were performed. Outcomes by age were plotted using running-mean smoothed graphs. Over the 9-year period, the average observed death rate was 51.7%. Among all survivors, 14.6% went home to self-care and a further 15.2% to home health care. Of all survivors, 43.8% were readmitted within 1 month, and 60.6% within 1 year. Among elderly survivors, readmission rates were 52.3% and 65.5% within 1 month and 1 year, respectively. The likelihood of dying in-hospital increased with age that of being discharged home or to postacute care decreased. In a "usual clinical practice" setting, short-term outcomes are similar to those observed in clinical trials such as Conventional Ventilation or ECMO for Severe Adult Respiratory Failure, in registries such as extracorporeal life support organization, and in smaller single-site studies. More data on longer term follow-up are needed to allow clinicians to better inform patient selection and care.

  1. Nurses' Use and Perception of an Information and Communication Technology System for Improving Coordination During Hospital Discharges: A Survey in Swedish Primary Healthcare.

    Science.gov (United States)

    Christiansen, Line; Fagerström, Cecilia; Nilsson, Lina

    2017-07-01

    To facilitate communications between care levels and improve coordination during hospital discharges, there is great potential in using information and communication technology systems, because they can significantly help to deter unnecessary readmissions. However, there is still a lack of knowledge about how often nurses use information and communication technology and the indicators related to its use. The aims of this study were to describe the indicators related to nurses' use of an information and communication technology system for collaboration between care levels and to estimate whether the level of use can be related to nurses' perceptions of the information and communication technology system's contribution to improve coordination during hospital discharges. A quantitative survey of 37 nurses from 11 primary healthcare centers was performed in a county in southern Sweden. The data were analyzed using descriptive and comparative analyses. The results showed that perceptions concerning the information and communication technology system's usability and time consumption differed between nurses who used the system and those who did not. Simultaneously, the nurses were rather unaware of the ability of the information and communication technology system to improve coordination during patient discharges.

  2. Report on surveys in fiscal 1999 on research and development of the environment harmonizing catalyst technology; 1999 nendo kankyo chowagata shokubai gijutsu no kenkyu kaihatsu chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    This paper reports the surveys in fiscal 1999 on research and development of the environment harmonizing catalyst technology. The discussion subjects taken up included suppression of discharge of carbon dioxide, catalysts used when manufacturing hydrogen and technology thereof, and environment purifying catalysts to decompose harmful substances, and technology thereof. The roles of catalysts and their technologies are expected in reducing the reforming temperatures, achieving energy saving, and reducing decomposition energy. Furthermore, the catalysts are expected of high activity, long life and low cost. Three themes were selected from the emergency and importance points of view. The themes are, in the consumer field, research and development of efficiency improvement in membrane reactors for reforming low-grade hydrocarbons to structure a technology to manufacture hydrogen for small-size portable fuel cells; and in the industrial field, development of hydrogen and carbon product manufacturing technologies with which CO2 generation is suppressed by means of the catalytic decomposition process. In practice, for such discharged harmful substances as dioxins, PCB and volatile organic compounds (VOC), treating them is the urgent environmental problem, and therefore, the fundamental research was taken up for practical application of the second-generation catalysts of the ultra-violet light and visible light responding type. (NEDO)

  3. Leading research report for fiscal 1999. Survey and research on microparticle control process technology; 1999 nendo micro ryushi seigyo process gijutsu no chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    For the functional upgrading of electronic equipment which will support the computerized society in the 21st century, a substance itself is required to exhibit novel functions or to behave better on a reduced amount. Dependence on the synthesis of new materials alone has its own limit, but a method of reducing the substances conventionally known for their safety into particles of the nanometer scale will be one of the solutions. Micro-science and micro-technology are in progress in Japan and abroad, which mainly deal with particles 10nm-100nm in size. To make better use of the functions of substances, there should be single nanoparticles 1nm-10nm in size. Such particles are easy to coagulate, however, and it is difficult to keep them in their nanometer-scale single state free of coagulation. If Japan succeeds in the development of 1nm-10nm size nanoparticle structurizing technology and manufacturing technology utilizing this technology, Japan will have a clear advantage over other countries in the world in the domain of nanoparticle engineering. The survey and research described in this report aim to review the trends of technologies for nanoparticle composition and functionalization and to clarify the course that Japan is to follow in the development of technologies concerned. (NEDO)

  4. FY 1998 report on the verification survey of geothermal exploration technology, etc. 1/2. Survey of deep geothermal resource; 1998 nendo chinetsu tansa gijutsu nado kensho chosa hokokusho. 1/2. Shinbu chinetsu shigen chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-12-01

    For the purpose of commercializing deep geothermal resource, a deep exploration well of 4000m class was drilled in the existing geothermal development area to survey the situation of deep geothermal resource existence and the availability. Concretely, the deep geothermal exploration well was drilled for study in the Kakkonda area, Shizukuishi town, Iwate prefecture, to clarify the situation of deep geothermal resource existence and the whole image of geothermal system. Consideration was made of the deep geothermal exploration method, systematization of deep high temperature drilling technology, and availability of deep geothermal resource. The results of the survey were summed up as follows: 1) general remarks; 2) deep exploration well drilling work; 3) details of the study. 1) and 2) were included in this report, and 3) in the next report. In 1), the items were as follows: the study plan/gist of study execution, the details and results of the deep geothermal resource survey, the outline of the deep exploration well drilling work, and the outline of the results of the FY 1998 study. In 2), the drilling work plan/the actual results of the drilling work were summed up. As to the results of the study, summarized were the acquisition of survey data on deep exploration well, heightening of accuracy of the deep geothermal resource exploration method, etc. (NEDO)

  5. Report for fiscal 2000 on surveys on foundation to establish industrial technology strategy. Surveys on foundation to assist activation of research and development; 2000 nendo sangyo gijutsu senryaku sakutei kiban chosa hokokusho. Kenkyu kaihatsu kasseika shien kiso chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    In order to help discuss the measures to activate researches and developments in private corporations, surveys were made on barriers and factors related to industrial technology research and development by fields, and discussions were given on structuring research and development models. Factors impeding research and development processes relate to a case of each phase in the fundamental research, applied research, and product development, and a case of human resources, funds and information. A policy of structuring models was determined to make quantitative the effects of different aiding systems of the government for researches and developments in private corporations. Case analyses were conducted by using a pilot model. In the present research, a questionnaire survey was carried out to acquire such data as R and D time lag, and to identify the effects of the policies. Surveys were also performed on research and development programs in North America, by making interviews to concerned corporations. As a result of the surveys, such problems were extracted as research and development fund, freer flow of human resources, research and development systems, handling of results of researches performed by consortiums, accounting systems, and sale of the government owned patents. (NEDO)

  6. Fiscal 1999 survey report. Basic survey on practical application of innovative energy technologies; 1999 nendo kakushinteki energy gijutsu no jitsuyoka ni kansuru kiso chosa. 3

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    This survey aims to verify whether recoverable energies can bear the important role of energy source in place of fossil fuels, to probe into problems that may arise in the process of recoverable energy introduction, and to compile suggestions about measures toward their smooth introduction, these by working out an 'ultralong-term world energy supply and demand outlook' valid up to 2100. Various measures to deal with global warming are analyzed by simulation. The study is not to predict what is in store but to metrically describe and present choices and possibilities for the future with a theoretical consistency based on various factors including economic growth, population, demand for energy, magnitude of fossil energy resources, and feasibility and cost of recoverable energies. This study implies that there is not a single, determining policy for solving the global warming problem and that it is important to cope with the problem by resorting to combinations of various means. (NEDO)

  7. Self-Report Computer-Based Survey of Technology Use by People with Intellectual and Developmental Disabilities

    Science.gov (United States)

    Tanis, Emily Shea; Palmer, Susan; Wehmeyer, Michael; Davies, Daniel K.; Stock, Steven E.; Lobb, Kathy; Bishop, Barbara

    2012-01-01

    Advancements of technologies in the areas of mobility, hearing and vision, communication, and daily living for people with intellectual and developmental disabilities has the potential to greatly enhance independence and self-determination. Previous research, however, suggests that there is a technological divide with regard to the use of such…

  8. A Survey on Quality of Service Monitoring and Analysis of Network of Agricultural Science and Technology Resources

    OpenAIRE

    Jian , Ma

    2014-01-01

    International audience; First, current situation on Network of agricultural science and technology resources is described. Then we pay much attention to the quality of service monitoring and analysis system of network resources. And finally, we come to the conclusion that the construction of Quality of service monitoring, analysis of network of agricultural science and technology resources is in great need.

  9. Life Support Systems: Oxygen Generation and Recovery

    Data.gov (United States)

    National Aeronautics and Space Administration — The Advanced Exploration Systems (AES) Life Support Systems project Oxygen Generation and Recovery technology development area encompasses several sub-tasks in an...

  10. Understanding Older Adult's Technology Adoption and Withdrawal for Elderly Care and Education: Mixed Method Analysis from National Survey.

    Science.gov (United States)

    Chiu, Ching-Ju; Liu, Chia-Wen

    2017-11-03

    Elderly adults have comprised the fastest growing population adopting the Internet and computer technology over the past decade. However, how their experiences can shed light on elderly learning theory has not been examined much in the literature. This study investigated the factors and reasons associated with Internet adoption and withdrawal among older adults in Taiwan, and if any gender differences exist in this context. Data on participants aged 50 years and older from the nationally representative "Digital Opportunity Survey on Individuals and Households in Taiwan," who did not use the Internet in 2005 but adopted it in 2007 (n=1548), and those who reported using Internet in 2011 but then withdrew (n=1575), were analyzed. Factors and reasons associated with Internet adoption and withdrawal were examined using both quantitative and qualitative data. Education level independently predicted Internet adoption behavior. With regard to the reasons for adoption, 66% (62/94) of participants indicated they started using the Internet to meet certain "needs"; for example, "keeping up with the world" (40.4%, 38/94) was listed as the most critical reason, followed by "job needs" (25.5%, 24/94). Older adults with a positive attitude toward the Internet with regard to increasing employment opportunities (OR 2.0, 95% CI 1.0-3.9, P=.04) and the amount of information obtained (OR 0.5, 95% CI 0.3-0.9, P=.01), as well as enriching recreation and entertainment (OR 0.6, 95% CI 0.4-0.9, P=.02), were less likely to withdraw from the Internet. The most common reason for Internet withdrawal was "psychological barriers" (eg, no available time, no meaningful use, or nothing worth reading/watching; 66.3%, 193/291), followed by "health barriers" (eg, eyes or body deteriorate with Internet use; 21.0%, 61/291). Although psychological barriers were the most important factor for Internet withdrawal for both men (72.5%, 100/138) and women (62%, 93/150), women were more likely than men to be

  11. Joint project of the international network of agencies for health technology assessment--Part 1: Survey results on diffusion, assessment, and clinical use of positron emission tomography.

    Science.gov (United States)

    Hastings, John; Adams, Elizabeth J

    2006-01-01

    The International Network of Agencies for Health Technology Assessment (INAHTA) has been tracking activities associated with the clinical use of positron emission tomography (PET) in its members' healthcare systems since 1997 and published its first Joint Project report on PET in 1999. Part 1 of this Joint Project report presents survey results on diffusion, assessment activities, and policy for clinical use related to PET among INAHTA members since 1999. INAHTA members were surveyed in 2003-2004. Twenty-seven INAHTA agencies (69 percent response rate) from nineteen countries responded to the survey. Dedicated PET systems are the most universally installed systems to date. Mobile scanners and modified gamma cameras are used occasionally as lower cost alternatives, and interest in PET-computed tomography hybrid models is rising despite limited assessment of impact on service planning. PET was used and assessed most commonly for managing patients with cancer. All respondents reported having some form of public funding for clinical PET frequently linked to data collection for the purpose of gathering evidence to refine clinical use and guide resource allocation toward indications that maximize clinical and cost-effectiveness. The use of HTA within a continuous quality improvement framework can help optimize scarce resources for evaluation and use of high cost diagnostic technologies such as PET, particularly where potential clinical or cost-effectiveness is considerable but conclusive evidence is lacking.

  12. Hydrographic processing considerations in the “Big Data” age: An overview of technology trends in ocean and coastal surveys

    Science.gov (United States)

    Holland, M.; Hoggarth, A.; Nicholson, J.

    2016-04-01

    The quantity of information generated by survey sensors for ocean and coastal zone mapping has reached the “Big Data” age. This is influenced by the number of survey sensors available to conduct a survey, high data resolution, commercial availability, as well as an increased use of autonomous platforms. The number of users of sophisticated survey information is also growing with the increase in data volume. This is leading to a greater demand and broader use of the processed results, which includes marine archeology, disaster response, and many other applications. Data processing and exchange techniques are evolving to ensure this increased accuracy in acquired data meets the user demand, and leads to an improved understanding of the ocean environment. This includes the use of automated processing, models that maintain the best possible representation of varying resolution data to reduce duplication, as well as data plug-ins and interoperability standards. Through the adoption of interoperable standards, data can be exchanged between stakeholders and used many times in any GIS to support an even wider range of activities. The growing importance of Marine Spatial Data Infrastructure (MSDI) is also contributing to the increased access of marine information to support sustainable use of ocean and coastal environments. This paper offers an industry perspective on trends in hydrographic surveying and processing, and the increased use of marine spatial data.

  13. A survey of the knowledge, use, and adoption of emerging technologies by academics in an Open Distance Learning environment

    Directory of Open Access Journals (Sweden)

    B Chimbo

    2014-07-01

    Full Text Available The realisation of the advantages offered by e-learning accompanied by the use of various emerging information technologies has resulted in a noticeable shift by academia towards e-learning. An analysis of the use, knowledge and adoption of emerging technologies by academics in an Open Distance Learning (ODL environment at the University of South Africa (UNISA was undertaken in this study. The aim of the study was to evaluate the use, knowledge and adoption of emerging e-learning technologies by the academics from the selected schools. The academics in the Schools of Arts, Computing and Science were purposively selected in order to draw on views of academics from different teaching and educational backgrounds. Questionnaires were distributed both electronically and manually. The results showed that academics in all the Schools were competent at the use of information technology tools and applications such as emailing, word-processing, Internet, myUnisa (UNISA’s online teaching platform, and Microsoft PowerPoint and Excel. An evaluation of the awareness of different emerging technological tools showed that most academics were aware of Open Access Technologies, Social Networking Sites, Blogs, Video Games and Microblogging Platforms. While the level of awareness was high for these technologies, the use by the academics was low. At least 62.3% of the academics indicated willingness to migrate to online teaching completely and also indicated the need for further training on new technologies. A comparison of the different schools showed no statistically significant difference in the use, knowledge and willingness to adopt technology amongst the academics.

  14. Survey on problems in developing technologies for the global environment issues (Version II); Chikyu kankyo mondai gijutsu kaihatsu kadai chosa. 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1990-07-01

    This paper describes a survey on problems in developing technologies for the global environment issues. Technological development of means to reduce generation of environmental issues and substitutive means for non-generation thereof is being moved forward specifically in the Sunshine Project and the Moonlight Project. The Chemical Technology Research Institute assumes that it has a responsibility to positively contribute to developing a technological system that matches the substance circulation mechanism of the earth from the fields of chemistry. Therefore, the Institute has organized working groups that have been identifying problems from their expertise standpoints and have been extracting study assignments. Subsequent to the Version I, the Version II has been compiled. The Version II takes up the simulation of global warming mechanisms, behavior of gases dissolved in oceans, and possibility of fixing CO2 in oceans. With respect to fluorocarbons, the Version II describes development of substitutive substances, their stability, combustion method as a destruction technique, and destruction by means of super criticality. Regarding CO2, the version introduces technologies to re-use CO2 as a resource by means of membrane separation, storage, and contact hydrogenation. The volume also dwells on CO2 reduction by using photo-chemical and electrochemical reactions, CO2 reduction and photo-synthesis by using semiconductors as photo catalysts and electrodes. (NEDO)

  15. FY 1999 New Sunshine Project survey research project - Survey on the long-term energy technology strategy, etc. Fundamental survey to decide on the industrial technology strategy - Technology strategy by field (Electronic information technology field - Human process ware technology field of the computer relation field); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (bun'yabetsu gijutsu senryaku (denshi joho gijutsu bun'ya (computer kanren bun'ya no uchi, human process ware gijutsu bun'ya)))

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    The survey/study were conducted to contribute to proposing technology strategies such as the analysis of the present state of technical competitive force and the forecast in the human process ware industry technology field of the computer relation field. The human process ware is a system aimed at fermenting human power for thinking, problem solution and creation. Its main subjects are the following three: close society technology for will communication by automatically learning backgrounds of people joining the community; topics community technology for community formation for the appropriate people/organizations by grasping true topics/purposes from conversation; active interaction technology for supporting creative activities of users/community and making conversation with users. Further, in the region of the technology to meet the requests/restrictions from the society, the following are expected: energy/resource conservation; realization of the life with ease/safety and of high quality in the aged society; realization of the advanced information network society which becomes the basis of a new economic society. (NEDO)

  16. Report on a survey in fiscal 1999. Part 2. Survey on the biomass-derived energy conversion technology; 1999 nendo biomass shigen wo genryo to suru energy henkan gijutsu ni kansuru chosa hokokusho. 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Biomass energy is positioned as a promising environment harmonizing energy in the 21st century because it does not break down the CO2 balance in the global scale. The present survey has investigated quantity of biomass resources utilizable as energy resources, investigated and analyzed the biomass-derived energy conversion technology, searched for a promising practically usable technology, and discussed the means to achieve the technological introduction. The foreword chapter describes that now is the good time to recognize importance of and introduce the biomass-derived technology. First and second chapters estimate energy potential and utilizable quantity of wastes-based biomass in Indonesia, Malaysia, the Philippines, and Brazil. Chapter 3 investigates feasibility of methane fermentation and ethanol fermentation as a promising bio-chemical conversion process. Chapter 4 has performed feasibility studies on biomass electric power generation, methanol synthesis by gasification, thermal decomposition and gasification as promising thermo-chemical conversion processes. Chapter 5 proposed a biomass electric power generation system, a biomass-gasified methanol synthesizing system, and a dimethyl ether production system. (NEDO)

  17. Evaluation of the use of reactive oxygen species (ROS generated through oxyion® technology in strawberry (Fragaria × ananassa (Duchesne ex Weston Duchesne ex Rozier cv. Monterrey storage

    Directory of Open Access Journals (Sweden)

    Rafael Andres Ramirez

    2018-04-01

    Full Text Available Reactive oxygen species (ROS play a key role in oxidative stress processes at the biological level. In most cases the presence of these chemical species is undesirable due to the impact they have on tissues and cellular structures, however, their effects can be used to control the incidence of microorganisms responsible for deterioration processes in fruits and vegetables. In the present study the feasibility of combining low temperature storage with the presence of reactive oxygen species generated using Oxyion® technology to control the deterioration process in strawberry (Fragaria X ananassa was studied. The treatments used were as follows: control storage (4°C ± 2°C without Oxyion® and ROS storage (4°C ± 2°C with Oxyion®, for two product categories according to weight and maturation state according to NTC 4103 (ICONTEC, 1997. The variables were monitored with measuring points at 1, 3, 5, 7, 10 and 15 days after harvest in percentage of loss of mass, soluble solids, respiratory intensity, acidity, resistance, color and ethylene and significant interactions among variables. At the conclusion of the study, Oxyion® technology was found to have statistically significant differences compared to control, and have allowed to less weight loss, higher resistance and lower exogenous ethylene production, extending the life of strawberry cv. Monterrey in a 40% during storage, additionally the losses by action of microorganisms present in strawberries surface were reduced considerably, generating a positive precedent in the processes of storage and conservation of fruits for Colombia.

  18. Technological progress and long-term energy demand - a survey of recent approaches and a Danish case

    DEFF Research Database (Denmark)

    Klinge Jacobsen, Henrik

    2001-01-01

    This paper discusses di!erent approaches to incorporating technological progress in energy-economy models and the e!ecton long-term energy demand projections. Approaches to modelling based on an exogenous annual change of energy e$ciencyto an endogenous explanation of innovation for energy...... technologies are covered. Technological progress is an important issue for modelling long-term energy demand and is often characterised as the main contributor to the di!erent energy demand forecasts from di!erent models. New economic theoretical developments in the "elds of endogenous growth and industrial...... description, two models of residential energy demand in Denmark are compared. A Danish macroeconometric model is compared to a technological vintage model that is covering electric appliances and residential heating demand. The energy demand projection of the two models diverges, and the underlying...

  19. Avatar Web-Based Self-Report Survey System Technology for Public Health Research: Technical Outcome Results and Lessons Learned.

    Science.gov (United States)

    Savel, Craig; Mierzwa, Stan; Gorbach, Pamina M; Souidi, Samir; Lally, Michelle; Zimet, Gregory; Interventions, Aids

    2016-01-01

    This paper reports on a specific Web-based self-report data collection system that was developed for a public health research study in the United States. Our focus is on technical outcome results and lessons learned that may be useful to other projects requiring such a solution. The system was accessible from any device that had a browser that supported HTML5. Report findings include: which hardware devices, Web browsers, and operating systems were used; the rate of survey completion; and key considerations for employing Web-based surveys in a clinical trial setting.

  20. Barriers to the adoption of energy-saving technologies in the building sector: A survey study of Jing-jin-tang, China

    International Nuclear Information System (INIS)

    Du, Ping; Zheng, Li-Qun; Xie, Bai-Chen; Mahalingam, Arjun

    2014-01-01

    The building sector of China currently consumes 20% of the total energy consumption. Studies on barriers to the adoption of building energy-saving technologies are of great significance on implementing policies related to achieving energy-saving goals. This paper studied 15 barriers with the aid of information collected through questionnaires and semi-structured interviews. The respondents were 135 employees working in the Jing-jin-tang area. Based on the results of the factor analysis, the barriers were categorized into five groups: attitudes of stakeholders, policies and regulations, auxiliary resources, profitability, and adaptability of the technologies. Analysis of the entire sample showed that the stakeholders’ reluctance to use was the largest barrier, followed by high initial investment and low profitability. Further analysis showed that the occupation and designation of the respondents and the size of the enterprises that they served influenced their perspectives on the barriers. It was found that architects attributed more importance to the adoption of energy-saving technologies than contractors; barriers confronted by employees of large enterprises and small enterprises were different; managers perceived weaker barriers than frontline employees and were more optimistic about the prospect of building energy-saving technologies. Finally, policy recommendations were proposed based on these in-depth and targeted analyses. - Highlights: • Fifteen barriers to the adoption of energy-saving technologies are discussed. • Surveys are conducted in one of China's most technologically developed area. • The barriers are divided into 5 groups according to the results of factor analysis. • Barriers related to profitability greatly hamper the adoption of the technologies. • Comparative analyses show the background of respondents influence their viewpoints


<