Fascin expression in cholesteatoma: correlation with destruction of the ossicular chain and extent of disease.

Science.gov (United States)

Binnetoglu, A; Sari, M; Baglam, T; Erbarut Seven, I; Yumusakhuylu, A C; Topuz, M F; Batman, C

2015-08-01

Fascin is an actin-bundling protein found in cell membrane protrusions and increases cell motility. The expression of fascin in epithelial neoplasms has been described only recently. No data are available concerning the role of this protein in invasive cholesteatoma. Thus, we investigated the expression of fascin in cholesteatoma tissue and the relationship between fascin expression and intraoperative evaluation of the destruction of the ossicular chain and extent of disease. Cholesteatoma specimens of 28 patients and external auditory canal (EAC) skin specimens of the same patients (as the control group) were collected from mastoidectomies. Immunohistochemical technique was used to investigate the fascin expression in all cholesteatoma tissues and EAC skin specimens. Immunohistochemical staining was assessed semiquantitatively based on the thickness of epithelium. SPSS software version 16.0 (SPSS Inc., Chicago, IL, USA) was performed to statistically analyse the relationships between fascin expression and intraoperative evaluation destruction of ossicular chain and extent of the disease. Immunohistochemically, there was no or very low fascin expression observed in normal epithelial cells of EAC skin, while expressed in cholesteatoma tissue. Also, fascin expression in cholesteatoma tissues was significantly correlated with destruction of ossicular chain and extent of the disease. Fascin expression is usually found in cholesteatoma epithelium and is correlated with destruction of the ossicular chain and extent of disease. Considering all of the correlations between the clinical and histopathological findings, 'fascin immunoexpression scoring' may be used for histological grading of cholesteatoma. © 2015 John Wiley & Sons Ltd.

Feasible pickup from intact ossicular chain with floating piezoelectric microphone.

Science.gov (United States)

Kang, Hou-Yong; Na, Gao; Chi, Fang-Lu; Jin, Kai; Pan, Tie-Zheng; Gao, Zhen

2012-02-22

Many microphones have been developed to meet with the implantable requirement of totally implantable cochlear implant (TICI). However, a biocompatible one without destroying the intactness of the ossicular chain still remains under investigation. Such an implantable floating piezoelectric microphone (FPM) has been manufactured and shows an efficient electroacoustic performance in vitro test at our lab. We examined whether it pick up sensitively from the intact ossicular chain and postulated whether it be an optimal implantable one. Animal controlled experiment: five adult cats (eight ears) were sacrificed as the model to test the electroacoustic performance of the FPM. Three groups were studied: (1) the experiment group (on malleus): the FPM glued onto the handle of the malleus of the intact ossicular chains; (2) negative control group (in vivo): the FPM only hung into the tympanic cavity; (3) positive control group (Hy-M30): a HiFi commercial microphone placed close to the site of the experiment ear. The testing speaker played pure tones orderly ranged from 0.25 to 8.0 kHz. The FPM inside the ear and the HiFi microphone simultaneously picked up acoustic vibration which recorded as .wav files to analyze. The FPM transformed acoustic vibration sensitively and flatly as did the in vitro test across the frequencies above 2.0 kHz, whereas inefficiently below 1.0 kHz for its overloading mass. Although the HiFi microphone presented more efficiently than the FPM did, there was no significant difference at 3.0 kHz and 8.0 kHz. It is feasible to develop such an implantable FPM for future TICIs and TIHAs system on condition that the improvement of Micro Electromechanical System and piezoelectric ceramic material technology would be applied to reduce its weight and minimize its size.

Feasible pickup from intact ossicular chain with floating piezoelectric microphone

Directory of Open Access Journals (Sweden)

Kang Hou-Yong

2012-02-01

Full Text Available Abstract Objectives Many microphones have been developed to meet with the implantable requirement of totally implantable cochlear implant (TICI. However, a biocompatible one without destroying the intactness of the ossicular chain still remains under investigation. Such an implantable floating piezoelectric microphone (FPM has been manufactured and shows an efficient electroacoustic performance in vitro test at our lab. We examined whether it pick up sensitively from the intact ossicular chain and postulated whether it be an optimal implantable one. Methods Animal controlled experiment: five adult cats (eight ears were sacrificed as the model to test the electroacoustic performance of the FPM. Three groups were studied: (1 the experiment group (on malleus: the FPM glued onto the handle of the malleus of the intact ossicular chains; (2 negative control group (in vivo: the FPM only hung into the tympanic cavity; (3 positive control group (Hy-M30: a HiFi commercial microphone placed close to the site of the experiment ear. The testing speaker played pure tones orderly ranged from 0.25 to 8.0 kHz. The FPM inside the ear and the HiFi microphone simultaneously picked up acoustic vibration which recorded as .wav files to analyze. Results The FPM transformed acoustic vibration sensitively and flatly as did the in vitro test across the frequencies above 2.0 kHz, whereas inefficiently below 1.0 kHz for its overloading mass. Although the HiFi microphone presented more efficiently than the FPM did, there was no significant difference at 3.0 kHz and 8.0 kHz. Conclusions It is feasible to develop such an implantable FPM for future TICIs and TIHAs system on condition that the improvement of Micro Electromechanical System and piezoelectric ceramic material technology would be applied to reduce its weight and minimize its size.

Influence of Ossicular Chain Damage on Hearing After Chronic Otitis Media and Cholesteatoma Surgery: A Systematic Review and Meta-analysis.

Science.gov (United States)

Blom, Erik F; Gunning, Marlise N; Kleinrensink, Nienke J; Lokin, Alexander S H J; Bruijnzeel, Hanneke; Smit, Adriana L; Grolman, Wilko

2015-11-01

Physicians should ideally be able to provide patients with chronic otitis media and/or cholesteatoma specific information about postoperative hearing outcome, based on their level of preoperative ossicular chain damage (OCD). To identify the influence of preoperative OCD on hearing outcomes in patients after chronic otitis media and/or cholesteatoma surgery. PubMed, EMBASE, and the Cochrane Library databases were systematically searched for available evidence, without any constraints, on December 13, 2014, for articles published between January 1, 1975, and December 13, 2014. We reviewed the literature for articles assessing the prognostic value of OCD on postoperative hearing outcome (air-bone gap [ABG] in decibels), using Austin-Kartush criteria or independent OCD classification systems. We assessed relevance and validity using a self-designed critical appraisal tool based on the Cochrane Collaboration's risk of bias tool. Characteristics of study populations and postoperative ABGs in decibels were extracted from all included studies by 4 authors (E.F.B., M.N.G., N.J.K., A.S.H.J.L.). The tested hypothesis was formulated before data collection. Primary study outcome was defined as postoperative adult hearing outcomes after COM and/or cholesteatoma surgery defined as mean postoperative ABG. Our search yielded 5661 articles. Nine articles with high relevance were included. Pooled results of studies using the Austin-Kartush criteria showed a significant (P influence of stapes structure (intact stapes suprastructure, 13.5 [95% CI, 10.3-16.7], 15.1 [95% CI, 11.8-18.3], and 21.9 [95% CI, 15.0-28.8] dB vs absent stapes structure, 12.8 [95% CI, 9.5-16.1], 19.5 [95% CI, 14.9-24.1], and 30.2 [95% CI, 24.7-35.8] dB) on postoperative ABG. One study reported a significant (P = .04) difference in mean ABG between patients with present (18.9 [95% CI, 15.7-22.1] dB) and absent (24.4 [95% CI, 20.2-28.6] dB) malleus. Pooled results of Austin-Kartush studies showed that in

[Equivalent Lever Principle of Ossicular Chain and Amplitude Reduction Effect of Internal Ear Lymph].

Science.gov (United States)

Zhao, Xiaoyan; Qin, Renjia

2015-04-01

This paper makes persuasive demonstrations on some problems about the human ear sound transmission principle in existing physiological textbooks and reference books, and puts forward the authors' view to make up for its literature. Exerting the knowledge of lever in physics and the acoustics theory, we come up with an equivalent simplified model of manubrium mallei which is to meet the requirements as the long arm of the lever. We also set up an equivalent simplified model of ossicular chain--a combination of levers of ossicular chain. We disassemble the model into two simple levers, and make full analysis and demonstration on them. Through the calculation and comparison of displacement amplitudes in both external auditory canal air and internal ear lymph, we may draw a conclusion that the key reason, which the sound displacement amplitude is to be decreased to adapt to the endurance limit of the basement membrane, is that the density and sound speed in lymph is much higher than those in the air.

CT two-dimensional reformation versus three-dimensional volume rendering with regard to surgical findings in the preoperative assessment of the ossicular chain in chronic suppurative otitis media

International Nuclear Information System (INIS)

Guo, Yong; Liu, Yang; Lu, Qiao-hui; Zheng, Kui-hong; Shi, Li-jing; Wang, Qing-jun

2013-01-01

Purpose: To assess the role of three-dimensional volume rendering (3DVR) in the preoperative assessment of the ossicular chain in chronic suppurative otitis media (CSOM). Materials and methods: Sixty-six patients with CSOM were included in this prospective study. Temporal bone was scanned with a 128-channel multidetector row CT and the axial data was transferred to the workstation for multiplanar reformation (MPR) and 3DVR reconstructions. Evaluation of the ossicular chain according to a three-point scoring system on two-dimensional reformation (2D) and 3DVR was performed independently by two radiologists. The evaluation results were compared with surgical findings. Results: 2D showed over 89% accuracy in the assessment of segmental absence of the ossicular chain in CSOM, no matter how small the segmental size was. 3DVR was as accurate as 2D for the assessment of segmental absence. However, 3DVR was found to be more accurate than 2D in the evaluation of partial erosion of segments. Conclusion: Both 3DVR and 2D are accurate and reliable for the assessment of the ossicular chain in CSOM. The inclusion of 3DVR images in the imaging protocol improves the accuracy of 2D in detecting ossicular erosion from CSOM

CT two-dimensional reformation versus three-dimensional volume rendering with regard to surgical findings in the preoperative assessment of the ossicular chain in chronic suppurative otitis media

Energy Technology Data Exchange (ETDEWEB)

Guo, Yong, E-mail: guoyong27@hotmail.com [Department of Radiology, Navy General Hospital, 6# Fucheng Road, Beijing 100048 (China); Liu, Yang, E-mail: liuyangdoc@sina.com [Department of Otorhinolaryngology, Navy General Hospital, 6# Fucheng Road, Beijing 100048 (China); Lu, Qiao-hui, E-mail: Luqiaohui465@126.com [Department of Radiology, Navy General Hospital, 6# Fucheng Road, Beijing 100048 (China); Zheng, Kui-hong, E-mail: zhengkuihong1971@sina.com [Department of Radiology, Navy General Hospital, 6# Fucheng Road, Beijing 100048 (China); Shi, Li-jing, E-mail: Shilijing2003@yahoo.com.cn [Department of Radiology, Navy General Hospital, 6# Fucheng Road, Beijing 100048 (China); Wang, Qing-jun, E-mail: wangqingjun77@163.com [Department of Radiology, Navy General Hospital, 6# Fucheng Road, Beijing 100048 (China)

2013-09-15

Purpose: To assess the role of three-dimensional volume rendering (3DVR) in the preoperative assessment of the ossicular chain in chronic suppurative otitis media (CSOM). Materials and methods: Sixty-six patients with CSOM were included in this prospective study. Temporal bone was scanned with a 128-channel multidetector row CT and the axial data was transferred to the workstation for multiplanar reformation (MPR) and 3DVR reconstructions. Evaluation of the ossicular chain according to a three-point scoring system on two-dimensional reformation (2D) and 3DVR was performed independently by two radiologists. The evaluation results were compared with surgical findings. Results: 2D showed over 89% accuracy in the assessment of segmental absence of the ossicular chain in CSOM, no matter how small the segmental size was. 3DVR was as accurate as 2D for the assessment of segmental absence. However, 3DVR was found to be more accurate than 2D in the evaluation of partial erosion of segments. Conclusion: Both 3DVR and 2D are accurate and reliable for the assessment of the ossicular chain in CSOM. The inclusion of 3DVR images in the imaging protocol improves the accuracy of 2D in detecting ossicular erosion from CSOM.

Middle Ear Exploration Results in Suspected Otosclerosis Cases Referred to Amir-Almomenin and Golsar Hospitals, Rasht, 2001-2011: Are Ossicular and Footplate Area Anomalies Rare?

Directory of Open Access Journals (Sweden)

Shadman Nemati

2013-06-01

Full Text Available Introduction: Otosclerosis is a disease of bony labyrinth. Structural changes in the labyrinth often cause ossicular fixation, and thus conductive hearing loss. The purpose of this study was to evaluate middle ear exploration findings and frequency of ossicular and footplate area anomalies in patients with suspected otosclerosis referred to Amiralmomenin and Golsar Hospitals in Rasht, Iran.   Materials and Methods: In 47 patients undergone middle ear exploration in Amiralmomenin and Golsar hospitals from April 2001 to March 2011, the intraoperative findings, and other data were extracted from the medical records of the patients. The data was analyzed using SPSS 17 software.   Results: Frequency of fixation of stapes, malleus, and incus by age and sex in patients undergoing middle ear exploration showed that stapes had been fixed in 39 patients, malleus in 6 patients, and incus in 21 patients. Analysis of data showed that there was no significant association between sex and age with fixation of any of ossicles (P>0/05. Middle ear anomalies were seen in 16 cases (34.0%. Overhanging of facial nerve in 4 cases, thick stapedial crura in 5 cases, and perilymph gusher in 2 cases were the most frequent anomalies.   Conclusion:  This study show that the results of middle ear explorations in our patients in the north of Iran is somehow different from the typical otosclerotic cases, although the frequency of ossicular anomalies is better to be evaluated and compared in different areas of Iran, and other countries. 

Electrocoagulation improving bone cement use in middle-ear surgery: short-term and middle-term results.

Science.gov (United States)

Galy-Bernadoy, C; Akkari, M; Mondain, M; Uziel, A; Venail, F

2016-12-01

Bone cement is used for ossicular chain repair and revision stapes surgery. Its efficient use requires cautious removal of mucosa from the ossicles. This paper reports a technique for easy, fast and safe removal of this mucosa prior to cement application. It consists of the application of monopolar electrocoagulation on the ossicles prior to bone cement application. The outcomes of six cases of revision stapes surgery and seven cases of partial ossiculoplasty, conducted between 2007 and 2012 using this new technique, were evaluated. Intra-operative reports and audiometric data were collected. During the last assessment, reconstruction using bone cement resulted in mean post-operative air-bone gaps of 4.1 ± 6.5 dB in revision stapes surgery cases and 5.7 ± 5.5 dB in partial ossiculoplasty cases, reflecting a significant hearing improvement (p = 0.03). No complications were observed. Electrocoagulation allows the removal of mucosa from the ossicles in an easy, fast and safe manner, enabling the use of bone cement for ossicular chain reconstruction.

The relationship between post-traumatic ossicular injuries and conductive hearing loss: A 3D-CT study.

Science.gov (United States)

Maillot, Olivier; Attyé, Arnaud; Boutet, Claire; Boubagra, Kamel; Perolat, Romain; Zanolla, Marion; Grand, Sylvie; Schmerber, Sébastien; Krainik, Alexandre

2017-09-01

After a trauma, the conductive ossicular chain may be disrupted by ossicular luxation or fracture. Recent developments in 3D-CT allow a better understanding of ossicular injuries. In this retrospective study, we compared patients with post-traumatic conductive hearing loss (CHL) with those referred without CHL to evaluate the relationship between ossicular injuries and CHL. We also assessed the added value of 3D reconstructions on 2D-CT scan to detect ossicular lesions in patients surgically managed. The CT scans were performed using a 40-section spiral CT scanner in 49 patients with post-traumatic CHL (n=29) and without CHL (n=20). Three radiologists performed independent blind evaluations of 2D-CT and 3D reconstructions to detect ossicular chain injury. We used the t-test to explore differences regarding the number of subjects with ossicular injury in the two groups. We also estimated the diagnostic accuracy and the inter-rater agreement of the 3D-CT reconstructions associated to 2D-CT scan. We identified ossicular abnormality in 14 patients out of 29 and in one patient out of 20 in the CHL and non-CHL groups respectively. There was a significant difference regarding the number of subjects with ossicular lesions between the two groups (P≤0.01). The diagnostic sensitivity of 3D-CT reconstructions associated with 2D-CT ranged from 66% to 100% and the inter-reader agreement ranged from 0.85 to 1, depending of the type of lesion. The relationship between ossicular lesion and the presence of CHL tightly correlated. 3D-CT reconstructions of the temporal bone are useful to assess patients in a post-traumatic context. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

Total Ossicular Replacement Prosthesis: A New Fat Interposition Technique.

Science.gov (United States)

Saliba, Issam; Sabbah, Valérie; Poirier, Jackie Bibeau

2018-01-01

To compare audiometric results between the standard total ossicular replacement prosthesis (TORP-S) and a new fat interposition total ossicular replacement prosthesis (TORP-F) in pediatric and adult patients and to assess the complication and the undesirable outcome. This is a retrospective study. This study included 104 patients who had undergone titanium implants with TORP-F and 54 patients who had undergone the procedure with TORP-S between 2008 and 2013 in our tertiary care centers. The new technique consists of interposing a fat graft between the 4 legs of the universal titanium prosthesis (Medtronic Xomed Inc, Jacksonville, FL, USA) to provide a more stable TORP in the ovale window niche. Normally, this prosthesis is designed to fit on the stapes' head as a partial ossicular replacement prosthesis. The postoperative air-bone gap less than 25 dB for the combined cohort was 69.2% and 41.7% for the TORP-F and the TORP-S groups, respectively. The mean follow-up was 17 months postoperatively. By stratifying data, the pediatric cohort shows 56.5% in the TORP-F group (n = 52) compared with 40% in the TORP-S group (n = 29). However, the adult cohort shows 79.3% in the TORP-F group (n = 52) compared with 43.75% in the TORP-S group (n = 25). These improvements in hearing were statistically significant. There were no statistically significant differences in the speech discrimination scores. The only undesirable outcome that was statistically different between the 2 groups was the prosthesis displacement: 7% in the TORP-F group compared with 19% in the TORP-S group ( P  = .03). The interposition of a fat graft between the legs of the titanium implants (TORP-F) provides superior hearing results compared with a standard procedure (TORP-S) in pediatric and adult populations because of its better stability in the oval window niche.

High-frequency conductive hearing loss as a diagnostic test for incomplete ossicular discontinuity in non-cholesteatomatous chronic suppurative otitis media.

Directory of Open Access Journals (Sweden)

Krishnamurti M A Sarmento

Full Text Available Chronic suppurative otitis media, with or without cholesteatoma, may lead to erosion of the ossicles and discontinuity of the ossicular chain. In incomplete ossicular discontinuity (IOD, partial erosion of the ossicles occurs, but some sound transmission is noted throughout the ossicular chain. High-frequency conductive hearing loss (HfCHL has been considered a hallmark of incomplete ossicular discontinuity. This study aims to evaluate the use of HfCHL as a preoperative predictor of IOD in patients with non-cholesteatomatous chronic suppurative otitis media. The HfCHL test was defined as the preoperative air-bone gap (ABG at 4 kHz minus the average of the ABG at 0.25 and 0.5 kHz. The test was applied in 328 patients before surgery and compared to intraoperative findings as the gold standard. At surgery, 201 (61.3% patients had an intact ossicular chain, 44 (13.4% had a complete ossicular discontinuity, and 83 (25.3% exhibited an IOD. The best cutoff level was calculated as 10 dB. The HfCHL test to diagnose IOD had a sensitivity of 83% and a specificity of 92% with a post-test probability of 78% and a likelihood ratio of 10.2. We concluded that the HfCHL test is highly effective in predicting IOD in patients with non-cholesteatomatous chronic suppurative otitis media and that it should be used routinely as a screening test prior to surgery.

Short-term results using Kurz titanium ossicular implants.

Science.gov (United States)

Vassbotn, Flemming S; Møller, Per; Silvola, Juha

2007-01-01

The efficiency of titanium middle ear prosthesis for ossicular reconstruction in chronic ear disease is investigated in a Scandinavian two-center retrospective study from a Norwegian tertiary otology referral center and a Finnish otology referral center. Retrospective chart reviews were performed for procedures involving 73 titanium prostheses between 1999 and 2004. All patients that underwent surgery including the Kurz Vario titanium prosthesis were included in the study, 38 procedures including the partial ossicular replacement prosthesis (PORP) and 35 procedures including the total ossicular replacement prosthesis (TORP). Mean follow-up was 14 months. The ossiculoplasty was performed alone (29 patients) or in combination with other chronic ear surgery procedures (34 patients). Comparisons of preoperative and postoperative pure tone averages (0.5, 1, 2, and 3 kHz) according to AAO-HNS guidelines are presented, as well as data for different PTA definitions. Otosurgery procedures, complications, revisions, and extrusion rates are reported. A postoperative air-bone gap (ABG) of ossicular chain. We found no difference between reconstruction with or without cholesteatoma surgery during the same procedure. The combination of CWD and Torp gave significant inferior hearing thresholds as compared to Torp/CWU and Porp/CWD combinations.

Discovery of the earliest-known tetrapod stapes.

Science.gov (United States)

Clack, J A

1989-11-23

The evolution of the middle ear is central to the discussion of how the first tetrapods adapted to life on land as well as their phylogeny. Here I report the discovery of the stapes of Acanthostega gunnari, from the Upper Devonian of east Greenland. This is the earliest tetrapod stapes so far described, and it throws new light on both these aspects of early tetrapod biology. It has been assumed that the common inheritance of all early tetrapods was a light, rod-like stapes associated with a temporal notch in the otic region that was thought to have supported a tympanum, or eardrum. The stapes would have conducted vibrations from the tympanum to the otic capsule. By contrast, the stapes of Acanthostega was stout with a broad distal ramus associated with the temporal notch. I suggest that the temporal notch of Acanthostega and other early tetrapods supported a spiracular opening rather than a tympanum, and that the stapes controlled palatal and spiracular movements in ventilation.

Diagnosis of ossicular deformities and inner ear anomalies by high resolution CT scanning of the temporal bone

International Nuclear Information System (INIS)

Isono, Michio

1988-01-01

A comparative study was undertaken to determine the optimum slice thickness and slice gaps that can define the fine contour and continuity of the ossicles and the inner ear. Horizontal tomography was proved to be contributory enough to obtain the whole ossicular chains and the whole labyrinthine capsule. Comparison of 1.5 mm slice thickness / 1.5 mm slice gaps, 1.0 mm slice thickness / 1.0 mm slice gaps and 1.5 mm slice thickness / 1.0 mm slice gaps revealed that the last condition was optimal for demonstrating the ossicular chains, the first for the inner ear. A significant relationship was found between CT findings and surgical findings of ossicular chains in chronic otitis media and cholesteatoma. Radiological classification of the inner ear malformation, which was obtained by this method, were agenesis of the whole labyrinthine capsule, agenesis of the cochlea, slight protrusion of the cochlear growth, poor cochlear turning, agenesis of all the semicircular canals, anterior semicircular canals (s.c.) without posterior and lateral s.c., anterior s.c. without hypoplasia of posterior s.c. and aplasia of lateral s.c., and smallness of the vestibule. (author) 59 refs

Diagnosis of ossicular deformities and inner ear anomalies by high resolution CT scanning of the temporal bone

Energy Technology Data Exchange (ETDEWEB)

Isono, Michio

1988-04-01

A comparative study was undertaken to determine the optimum slice thickness and slice gaps that can define the fine contour and continuity of the ossicles and the inner ear. Horizontal tomography was proved to be contributory enough to obtain the whole ossicular chains and the whole labyrinthine capsule. Comparison of 1.5 mm slice thickness / 1.5 mm slice gaps, 1.0 mm slice thickness / 1.0 mm slice gaps and 1.5 mm slice thickness / 1.0 mm slice gaps revealed that the last condition was optimal for demonstrating the ossicular chains, the first for the inner ear. A significant relationship was found between CT findings and surgical findings of ossicular chains in chronic otitis media and cholesteatoma. Radiological classification of the inner ear malformation, which was obtained by this method, were agenesis of the whole labyrinthine capsule, agenesis of the cochlea, slight protrusion of the cochlear growth, poor cochlear turning, agenesis of all the semicircular canals, anterior semicircular canals (s.c.) without posterior and lateral s.c., anterior s.c. without hypoplasia of posterior s.c. and aplasia of lateral s.c., and smallness of the vestibule. (author) 59 refs.

Advances tomographic in evaluation of middle ear

International Nuclear Information System (INIS)

Anjos, Mayara Alves Pinheiro dos; Ledo, Mirelle D'arc Frota; Ribeiro, Marcio Duarte

2011-01-01

Computed tomography has a key role in the study of hearing, since through it can be evaluated structures not seen by otoscope. In many clinical situations the diagnosis through this test proves limited, being fundamental examination of the associated image reconstructions: multiplanar reconstruction, maximum intensity projection, and volume-rendering technique. The ossicular chain is a complex formed by the ossicles malleus, incus and stapes, situated in the middle ear; it is difficult to view them in orthogonals planes. This review article intends to demonstrate the importance of post-processing the image of the ossicular chain for a better representation of the anatomy and possible diseases. Reformatting of images helps, significantly, to a better visualization of these structures as related congenital malformations, vascular abnormalities, inflammatory conditions, neoplasia and traumas. (author)

Ossicular erosions in the dry ear: CT diagnosis

International Nuclear Information System (INIS)

Swartz, J.D.; Nunnelly, D.E.; Zwillenberg, S.; Berger, A.S.; Popky, G.L.

1986-01-01

Erosions of the ossicular chain can occur as a complication of noncholesteatomatous chronic otitis media. These defects may appear on CT of the healed ''dry'' ear. Ischemic necrosis is the most likely etiology; however, acid phosphatase-containing lysosomes are also implicated. The incus (particularly the long and lenticular processes) is by far the most vulnerable ossicle. Coronal CT is especially valuable in diagnosing these erosions. Fibrous replacement of the incudostapedial articulation may be diagnosed on CT when an unusually wide ''joint'' is seen on axial CT scans

Congenital ossicular malformation. A study of 27 ears

International Nuclear Information System (INIS)

Morioka, Shigefumi; Sakaguchi, Hirofumi; Taki, Masakatsu; Hyogo, Misako; Suzuki, Toshihiro; Hisa, Yasuo

2010-01-01

Despite otological surgerical progress improving clinical congenital ossicular malformation management, some cases remain inadequately treated. We report 27 cases of congenital ossicular malformation, focusing on reasons for remaining or delayed postoperative hearing loss evaluated in 27 congenital ossicular malformation cases in Kyoto Prefecture from 2002 to 2008. Overall success was 93% (25/27) 6 months postoperatively. Two ears had no hearing improvement and three delayed hearing loss 8 to 48 months postoperatively. The first two ears underwent small fenestration stapedotomy with malleus attachment piston, and the other three tympanoplasty type III using an autologous ossicle or total ossicular replacement prosthesis (TORP) as a columella. We discuss problems and solutions using a malleus attachment piston or prosthesis, preoperative audio- and radiological findings, and operative findings including facial nerve anomaly and congenital cholesteatoma. (author)

Comparison of Conventional Versus Spiral Computed Tomography with Three Dimensional Reconstruction in Chronic Otitis Media with Ossicular Chain Destruction

International Nuclear Information System (INIS)

Naghibi, Saeed; Seifirad, Sirous; Adami Dehkordi, Mahboobeh; Einolghozati, Sasan; Ghaffarian Eidgahi Moghadam, Nafiseh; Akhavan Rezayat, Amir; Seifirad, Soroush

2016-01-01

Chronic otitis media (COM) can be treated with tympanoplasty with or without mastoidectomy. In patients who have undergone middle ear surgery, three-dimensional spiral computed tomography (CT) scan plays an important role in optimizing surgical planning. This study was performed to compare the findings of three-dimensional reconstructed spiral and conventional CT scan of ossicular chain study in patients with COM. Fifty patients enrolled in the study underwent plane and three dimensional CT scan (PHILIPS-MX 8000). Ossicles changes, mastoid cavity, tympanic cavity, and presence of cholesteatoma were evaluated. Results of the two methods were then compared and interpreted by a radiologist, recorded in questionnaires, and analyzed. Logistic regression test and Kappa coefficient of agreement were used for statistical analyses. Sixty two ears with COM were found in physical examination. A significant difference was observed between the findings of the two methods in ossicle erosion (11.3% in conventional CT vs. 37.1% in spiral CT, P = 0.0001), decrease of mastoid air cells (82.3% in conventional CT vs. 93.5% in spiral CT, P = 0.001), and tympanic cavity opacity (12.9% in conventional CT vs. 40.3% in spiral CT, P=0.0001). No significant difference was observed between the findings of the two methods in ossicle destruction (6.5% conventional CT vs. 56.4% in spiral CT, P = 0.125), and presence of cholesteatoma (3.2% in conventional CT vs. 42% in spiral CT, P = 0.172). In this study, spiral CT scan demonstrated ossicle dislocation in 9.6%, decrease of mastoid air cells in 4.8%, and decrease of volume in the tympanic cavity in 1.6%; whereas, none of these findings were reported in the patients' conventional CT scans. Spiral-CT scan is superior to conventional CT in the diagnosis of lesions in COM before operation. It can be used for detailed evaluation of ossicular chain in such patients

Sheep as a large animal ear model: Middle-ear ossicular velocities and intracochlear sound pressure.

Science.gov (United States)

Péus, Dominik; Dobrev, Ivo; Prochazka, Lukas; Thoele, Konrad; Dalbert, Adrian; Boss, Andreas; Newcomb, Nicolas; Probst, Rudolf; Röösli, Christof; Sim, Jae Hoon; Huber, Alexander; Pfiffner, Flurin

2017-08-01

Animals are frequently used for the development and testing of new hearing devices. Dimensions of the middle ear and cochlea differ significantly between humans and commonly used animals, such as rodents or cats. The sheep cochlea is anatomically more like the human cochlea in size and number of turns. This study investigated the middle-ear ossicular velocities and intracochlear sound pressure (ICSP) in sheep temporal bones, with the aim of characterizing the sheep as an experimental model for implantable hearing devices. Measurements were made on fresh sheep temporal bones. Velocity responses of the middle ear ossicles at the umbo, long process of the incus and stapes footplate were measured in the frequency range of 0.25-8 kHz using a laser Doppler vibrometer system. Results were normalized by the corresponding sound pressure level in the external ear canal (P EC ). Sequentially, ICSPs at the scala vestibuli and tympani were then recorded with custom MEMS-based hydrophones, while presenting identical acoustic stimuli. The sheep middle ear transmitted most effectively around 4.8 kHz, with a maximum stapes velocity of 0.2 mm/s/Pa. At the same frequency, the ICSP measurements in the scala vestibuli and tympani showed the maximum gain relative to the P EC (24 dB and 5 dB, respectively). The greatest pressure difference across the cochlear partition occurred between 4 and 6 kHz. A comparison between the results of this study and human reference data showed middle-ear resonance and best cochlear sensitivity at higher frequencies in sheep. In summary, sheep can be an appropriate large animal model for research and development of implantable hearing devices. Copyright © 2017 Elsevier B.V. All rights reserved.

[The technique of hearing reconstruction in the cases of conductive hearing loss with malformed tympanic segment of facial nerve].

Science.gov (United States)

Yang, Feng; Song, Rendong; Liu, Yang

2016-02-02

To explore the technique of hearing reconstruction in the cases of conductive hearing loss with malformed tympanic segment of facial nerve. Data of 10 cases from July 2010 to March 2015 were collected.The status of tympanic segment of facial nerve, malformed ossicles and the reconstructed methods of ossicular chain were analyzed and discussed based on the embryo anatomy and surgical technique. All facial nerves in 10 cases were exposed and drooping to stapes or cover the oval window.Three patients who had normal stapes, pushed by the exposed facial nerve, were reconstructed with partial ossicular replacement prostheses (PORP). Two patients who had footplate, with partial fixation, were reconstructed with total ossicular replacement prostheses (TORP). Three patients who had atresia of the oval window were implanted with Piston after being made hole in the atresia plate.Another two cases who had atresia of the oval window were implanted with TORP after promontory being drilled out.All cases had no injury of facial nerve and nervous hearing, and no tinnitus.Nine cases had conductive hearing improvement, except one with promontory drilled out. Patients who had conductive hearing loss with malformed tympanic segment of facial nerve can be treated by the technique of hearing reconstruction.The fenestration technique in the bottom of the scala tympani of the basal turn provides us a new method for treating patients whose oval window was fully covered by malformed facial nerve.

Holmium:YAG laser stapedotomy: preliminary evaluation

Science.gov (United States)

Stubig, Ingrid M.; Reder, Paul A.; Facer, G. W.; Rylander, Henry G.; Welch, Ashley J.

1993-07-01

This study investigated the use of a pulsed Holmium:YAG ((lambda) equals 2.09 micrometers ) laser- fiber microsurgical system for laser stapedotomy. This system ablates human stapes bones effectively with minimal thermal damage. The study was designed to determine the effectiveness of the Ho:YAG laser (Schwartz Electro Optics, Inc., Orlando, FL) for stapedotomy and to evaluate temperature changes within the cochlea during the ablation process. Human cadaveric temporal bones were obtained and the stapes portion of the ossicular chain was removed. A 200 micrometers diameter low OH quartz fiber was used to irradiate these stapes bones in an air environment. The laser was pulsed at 2 Hz, 250 microsecond(s) ec pulse width and an irradiance range of 100 - 240 J/cm2 was used to ablate holes in the stapes footplate. The resultant stapedotomies created had smooth 300 micrometers diameter holes with a minimum of circumferential charring. Animal studies in-vivo were carried out in chinchillas to determine the caloric spread within the cochlea. A 0.075 mm Type T thermocouple was placed in the round window. Average temperature change during irradiation of the stapes footplate recorded in the round window was 3.6 degree(s)C. The data suggest that stapedotomy using the Ho:YAG laser can result in a controlled ablation of the stapes footplate with minimal thermal damage to the surrounding stapes. Optical coupling using fiberoptic silica fibers is an ideal method for delivering laser energy to the stapes during stapedotomy.

X-linked deafness with stapes gusher in females

International Nuclear Information System (INIS)

Papadaki, E.; Prassopoulos, P.; Bizakis, J.; Karampekios, S.; Papadakis, H.; Gourtsoyiannis, N.

1998-01-01

A 22-year-old woman presented with severe mixed hearing loss and a flow of cerebrospinal fluid in the middle ear during stapes surgery (stapes gusher). HRCT of the temporal bones showed characteristic abnormalities of the inner ear (bulbous dilatation of the lateral portion of the internal acoustic meatus with incomplete separation from the cochlea, and widening of the first part of the facial nerve canal) described in X-linked progressive mixed deafness with stapes gusher. The evaluation of the patient's family revealed a sister with the same clinical history and identical HRCT findings, and 11 normal male relatives. This is the first report with typical findings of this entity that affects only female members of a family, suggesting another type of inheritance

The "boomerang" malleus-incus complex in congenital aural atresia.

Science.gov (United States)

Mukherjee, S; Kesser, B W; Raghavan, P

2014-01-01

"Boomerang" malleus-incus fusion deformity is identified on axial high-resolution CT in a subset of patients with congenital aural atresia, and it is associated with an absent incudostapedial joint and stapes capitulum and attachment of the incus to the tympanic segment of the facial nerve canal. Twelve patients with this deformity were identified on a retrospective review of imaging from a cohort of 673 patients with congenital aural atresia, with surgical confirmation in 9 of these patients. Eight of 9 patients underwent partial ossicular replacement prosthesis reconstruction with improvement in hearing outcome. We hypothesize that the boomerang anomaly represents a more severe ossicular anomaly than is normally seen in congenital aural atresia, arising from an arrest earlier in the embryonic development of the first and second branchial arch. This has potentially important implications for surgical planning because hearing outcomes with placement of prosthesis may not be as good as with conventional atresia surgery, in which reconstruction is performed with the patient's native ossicular chain. © 2014 by American Journal of Neuroradiology.

An experimental study for qualitatively diagnosing stapes lesions by helical 3-dimensional CT

International Nuclear Information System (INIS)

Kawaue, Akifumi; Kuki, Kiyonori; Yamanaka, Noboru; Nishimura, Michihiko

2001-01-01

To evaluate qualitative diagnosis of stapes lesions by 3-dimensional computed tomography (3D-CT) combined with superselective image processing (3D-SS) of stapes, we studied helical 3D-CT on a phantom model of the temporal bone. Two stapes models were used-1 made from the bone filler, Celatite, consistent in bone density but changing in cross sectional area, and the other made from an apacerum rod used in quantitative computed tomography (QCT), consistent in cross sectional area but changing in bone density. These stapes models were put into a skull phantom and analyzed by helical 3D-CT. The influence of the tympanic cavity conditions on CT images of stapes was evaluated by filling the phantom model with Vaseline following 3D selective reconstruction. In all stapes models, lowering the lower CT window width threshold resulted in an enlarged cross-sectional area of the model. The higher the bone density, the lower the increase in cross-sectional area in the image. The stapes model with lower density had greater influence on the imaging by tympanic cavity conditions and was likely to be misdiagnosed as showing higher bone density. Based on the experimental study, 3D-SS by helical 3D-CT appears to be a useful measure for qualitatively diagnosing stapes lesions. (author)

21 CFR 874.3540 - Prosthesis modification instrument for ossicular replacement surgery.

Science.gov (United States)

2010-04-01

... replacement surgery. 874.3540 Section 874.3540 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF... § 874.3540 Prosthesis modification instrument for ossicular replacement surgery. (a) Identification. A prosthesis modification instrument for ossicular replacement surgery is a device intended for use by a...

A qualitative diagnosis of stapes lesions by helical 3-dimensional CT

International Nuclear Information System (INIS)

Kawaue, Akifumi; Yamanaka, Noboru; Kuki, Kiyonori; Nishimura, Michihiko

2001-01-01

To evaluate the usefulness of 3D-CT combined with super-selective stapes's image processing (3D-SS) for the qualitative diagnosis of stapes lesions, a new parameter, the crus index, was designed and applied to CT image diagnosis of conductive hearing loss. The crus index was designed as a new parameter indicating the average of changing rate of cross section area of crus image when the lower thresholed of CT window width reduced by 100 H.U.. The crus index was calculated with 3D-SS in 5 ears with otosclerosis, in 5 ears with eroded long process of incus or crus of stapes, an ear with facial neurinoma (susp), an ear with soft density tissue on only stapes and 6 control ears and the diagnostic usefulness was evaluated as comparing the intra-/post-operative diagnosis. The crus index was significantly higher in ears with eroded long process of incus or crus of stapes (3.58+1.36) than otosclerosis (1.33+0.35) or controls (1.44+0.3). These data suggest that the crus index using 3D-SS may be a useful parameter in diagnosing conductive hearing loss. (author)

Bilateral Congenital Absence of the Stapes Superstructure in Two Siblings

Directory of Open Access Journals (Sweden)

Jose Ignacio Undabeitia

2014-01-01

Full Text Available Middle ear ossicle malformations are an uncommon event. Among them, the congenital absence of the stapes is a very rare condition that is seldom described in the literature. We report the cases of two women, aged 19 and 22 , who presented with a long history of conductive deafness. An exploratory tympanotomy was performed and the absence of the stapes superstructure and an abnormal position of the facial nerve could be observed. A bone anchored hearing aid (BAHA was implanted in both patients with good results. It is believed that stapes agenesis is related to an abnormal development of the facial nerve, which by the 5th to 6th week of gestation would interpose between the otic capsule and the stapes blastema, preventing these structures from contacting. A long history of nonprogressive hearing loss from birth or early childhood is the key to reach a diagnosis. Several treatment options have been described. The authors opted for a hearing aid due to the high risk of facial nerve lesion, with good functional results.

Multislice CT of the auditory ossicles and ossicular ligaments. Delineation of normal anatomy and diagnosis of congenital anomaly

International Nuclear Information System (INIS)

Matsumoto, Shigeru; Tozaki, Hiromitu; Miyazaki, Hidemi

2001-01-01

By using four detector rows with 0.5 mm collimation, high resolution isotropic voxel data throughout the middle ear can be obtained with Multislice Helical CT (MSCT). The purpose of this study is to evaluate the usefulness of MSCT in demonstrating the auditory ossicles and ossicular ligaments and in the diagnosis of congenital ossicular anomalies. Thirty normal middle ears and 23 ear of 20 patients with suspicious congenital ossicular anomalies were examined. Axial images and multiplanar images were reconstructed. In the normal group, the images were evaluated based on scores for the visualization of the anatomical structure of the auditory ossicles and ossicular ligaments. In the group with anomalies, the findings suggesting ossicular anomalies were referenced and the prevalence was conjectured. Visualization of the auditory ossicles and ossicular ligaments was 98.3%-100% and 78.3%-100%, respectively. Congenital ossicular anomalies were detected in 20 ears (87.0%). MSCT is an accurate method for demonstrating minute and complicated 3D structures of the middle ear, and is found to be a technique of choice for diagnosis of ossicular anomalies. (author)

CT of the normal and pathologic stapes

International Nuclear Information System (INIS)

Veillon, F.; Meriot, P.; Bintner, M.; Baur, P.; Bourjat, P.

1991-01-01

This paper reports on CT in the pathologic stapes. The radiologic aspect of the stapes was analyzed in 287 patients with noncholesteatomatous chronic otitis media (n = 46), cholesteatoma (n = 162), malformations (n = 52), and otosclerosis (n = 27) by using axial and, occasionally, coronal sections. Two CT scanners (M1 and M2) that differ in spatial resolution were used. The radiologic and surgical results are presented. In chronic cholesteatomous otitis, we analyzed two populations, P1 and P2. In the P1 population, (n = 92), studied on the M1 unit, there was stapes destruction in 39% (n = 36), versus 38% (n = 27) in the P2 population (n = 70), studied on the M2 unit. In P1, the diagnostic sensitivity was 97% and specificity was 78%. In P2, the sensitivity was 100% and specificity was 95%. The specificity of P2 was greater than that of P1 because of the smaller number of false-positive diagnoses with the M2 unit. Equivalent results are obtained in the malformation (n = 29) and trauma (n = 16) cases. In stapedo-vestibular otosclerosis, studied only with M2, the sensitivity was 92% and specificity was 100%

Long-term hearing result using Kurz titanium ossicular implants.

Science.gov (United States)

Hess-Erga, Jeanette; Møller, Per; Vassbotn, Flemming Slinning

2013-05-01

Titanium implants in middle ear surgery were introduced in the late 90s and are now frequently used in middle ear surgery. However, long-term studies of patient outcome are few and have only been published in subgroups of patients. We report the long-term effect of titanium middle ear implants for ossicular reconstruction in chronic ear disease investigated in a Norwegian tertiary otological referral centre. Retrospective chart reviews were performed for procedures involving 76 titanium implants between 2000 and 2007. All patients who underwent surgery using the Kurz Vario titanium implant were included in the study. Audiological parameters using four frequencies, 0.5, 1, 2, and 3 kHz, according to AAO-HNS guidelines, was assessed pre and postoperatively. Otosurgical procedures, complications, revisions, and extrusion rates were analyzed. The study had no dropouts. The partial ossicular replacement prosthesis (PORP) was used in 44 procedures and the total ossicular replacement prosthesis (TORP) in 32 procedures, respectively. Mean follow-up was 5.2 years (62 months). The ossiculoplasties were performed as staging procedures or in combination with other chronic ear surgery. The same surgeon performed all the procedures. A postoperative air-bone gap of ≤ 20 dB was obtained in 74 % of the patients, 82 % for the Bell (PORP) prosthesis, and 63 % for the Arial (TORP) prosthesis. The extrusion rate was 5 %. We conclude that titanium ossicular implants give stable and excellent long-term hearing results.

The Stapes of Gomphodont Cynodonts: Insights into the Middle Ear Structure of Non-Mammaliaform Cynodonts.

Directory of Open Access Journals (Sweden)

Leandro C Gaetano

Full Text Available The stapes is known in several non-mammaliaform cynodonts, although it has only been cursorily studied. Here we thoroughly analyze the stapedial anatomy of several basal cynodonts in a phylogenetic framework. Our study shows that the stapedial anatomy is more variable than previously thought. The morphological variation of the stapes led to the recognition of 11 phylogenetic characters that were included in a total evidence data matrix centered in the analysis of gomphodont cynodonts. Stapes morphology does not provide evidence to suggest a direct connection between the stapes and a postquadrate tympanic membrane (if present and the hypothesis of a dorsal process as the site of attachment of a small ligament or the stapedial muscle is supported. The re-evaluation of the theories concerning the position of the tympanic membrane in non-mammaliaform cynodonts allowed us to conclude that the hypothetical postquadrate tympanic membrane associated with the squamosal sulcus is at best relictual and most likely non-functional (not connected with the stapes. The sound waves were most likely transmitted to the stapes from a postdentary tympanic membrane through the quadrate. Our analysis results in a better understanding of the auditory system in basal cynodonts and its evolution, highlighting the variability of the stapedial anatomy.

Measurements of angles of the normal auditory ossicles relative to the reference plane and image reconstruction technique for obtaining optimal sections of the ossicles in high-resolution multiplanar reconstruction using a multislice CT scanner

International Nuclear Information System (INIS)

Fujii, Naoko; Katada, Kazuhiro; Yoshioka, Satoshi; Takeuchi, Kenji; Takasu, Akihiko; Naito, Kensei

2005-01-01

Using high-resolution isotropic volume data obtained by 0.5 mm, 4-row multislice CT, cross-sectional observation of the auditory ossicles is possible from any desired direction without difficulty in high-resolution multiplanar reconstruction (HR-MPR) images, also distortion-free three-dimensional images of the ossicles are generated in three-dimensional CT (3D-CT) images. We measured angles of fifty normal ossicles relative to the reference plane, which has been defined as a plane through the bilateral infraorbital margins to the middle portion of the external auditory canal. Based on the results of angle measurement, four optimal sections of the ossicles for efficient viewing to the ossicular chain were identified. To understand the position of the angle measurement and the four sections, the ossicles and the reference plane were reconstructed in the 3D-CT images. As the result of observation of the ossicles and the reference plane, the malleus was parallel to the incudal long process and perpendicular to the reference plane. As the results of angle measurement, the mean angle of the tympanic portion of the facial nerve relative to the reference plane in the sagittal plane was found to be 17 deg, and the mean angle of the stapedial crura relative to the reference plane in the sagittal plane was found to be 6 deg. The mean angle of the stapes relative to the reference plane in the coronal plane was 44 deg, and the mean angle of the incudal long process relative to the stapes in the coronal plane was 89 deg. In 80% of ears, the stapes extended straight from the incudal long process. Image reconstruction technique for viewing four sections of the ossicles was investigated. Firstly, the image of the malleal head and the incudal short process was identified in the axial plane. Secondly, an image of the malleus along the malleal manubrium was reconstructed in the coronal plane. Thirdly, the image of the incudal long process was seen immediately behind the malletis image

Differential Intracochlear Sound Pressure Measurements in Normal Human Temporal Bones

Science.gov (United States)

Nakajima, Hideko Heidi; Dong, Wei; Olson, Elizabeth S.; Merchant, Saumil N.; Ravicz, Michael E.; Rosowski, John J.

2009-02-01

We present the first simultaneous sound pressure measurements in scala vestibuli and scala tympani of the cochlea in human cadaveric temporal bones. Micro-scale fiberoptic pressure sensors enabled the study of differential sound pressure at the cochlear base. This differential pressure is the input to the cochlear partition, driving cochlear waves and auditory transduction. Results showed that: pressure of scala vestibuli was much greater than scala tympani except at low and high frequencies where scala tympani pressure affects the input to the cochlea; the differential pressure proved to be an excellent measure of normal ossicular transduction of sound (shown to decrease 30-50 dB with ossicular disarticulation, whereas the individual scala pressures were significantly affected by non-ossicular conduction of sound at high frequencies); the middle-ear gain and differential pressure were generally bandpass in frequency dependence; and the middle-ear delay in the human was over twice that of the gerbil. Concurrent stapes velocity measurements allowed determination of the differential impedance across the partition and round-window impedance. The differential impedance was generally resistive, while the round-window impedance was consistent with a compliance in conjunction with distributed inertia and damping. Our techniques can be used to study inner-ear conductive pathologies (e.g., semicircular dehiscence), as well as non-ossicular cochlear stimulation (e.g., round-window stimulation) - situations that cannot be completely quantified by measurements of stapes velocity or scala-vestibuli pressure by themselves.

Endoscopic versus transcranial procurement of allograft tympano-ossicular systems: a prospective double-blind randomized controlled audit.

Science.gov (United States)

Caremans, Jeroen; Hamans, Evert; Muylle, Ludo; Van de Heyning, Paul; Van Rompaey, Vincent

2016-06-01

Allograft tympano-ossicular systems (ATOS) have proven their use over many decades in tympanoplasty and reconstruction after resection of cholesteatoma. The transcranial bone plug technique has been used in the past 50 years to procure en bloc ATOS (tympanic membrane with malleus, incus and stapes attached). Recently, our group reported the feasibility of the endoscopic procurement technique. The aim of this study was to assess whether clinical outcome is equivalent in ATOS acquired by using the endoscopic procurement technique compared to ATOS acquired by using the transcranial technique. A double-blind randomized controlled audit was performed in a tertiary referral center in patients that underwent allograft tympanoplasty because of chronic otitis media with and without cholesteatoma. Allograft epithelialisation was evaluated at the short-term postoperative visit by microscopic examination. Failures were reported if reperforation was observed. Fifty patients underwent allograft tympanoplasty: 34 received endoscopically procured ATOS and 16 received transcranially procured ATOS. One failed case was observed, in the endoscopic procurement group. We did not observe a statistically significant difference between the two groups in failure rate. This study demonstrates equivalence of the clinical outcome of allograft tympanoplasty using either endoscopic or transcranial procured ATOS and therefore indicates that the endoscopic technique can be considered the new standard procurement technique. Especially because the endoscopic procurement technique has several advantages compared to the former transcranial procurement technique: it avoids risk of prion transmission and it is faster while lacking any noticeable incision.

Segmentation and reconstruction of the 3D geometry of the middle and inner ear

Directory of Open Access Journals (Sweden)

Lu Yanfei

2017-01-01

Full Text Available The anatomical model of the ear is of great importance in the design of ossicular prosthesis, cochlear implant electrodes, as well as for the preoperative planning and navigation of surgery. By means of micro-computed tomography (micro-CT and technology of 3D reconstruction, an anatomical model of the middle and inner ear was built. Region of interest includes the ossicular chain (malleus, incus, and stapes, cochlea (scala vestibule-ST, scala tympani-ST, basilar membrane-BM, spiral ligament-SL and osseous spiral lamina-OSL, tympanic membrane-TM, oval window membrane-OWM, round window membrane-OWM and stapedial annular ligament-SAL. The micro-CT images of a cadaver’s temporal bone were acquired by “SkyScan 1076” (Kontich, Belgium, www.skyscan.be and then reconstructed to cross-section images by SkyScan NRecon™ (v1.6.10.4. The image processing and 3D geometry reconstruction of temporal bone were performed by software Mimics® (v14.0, Materialise NV, Leuven, Belgium. The obtained structures are measured and validated against literature data and the results are in good agreement.

Handheld Micromanipulator for Robot-Assisted Stapes Footplate Surgery

Science.gov (United States)

Grande, Gonzalo Montes; Knisely, Anna J.; Becker, Brian C.; Yang, Sungwook; Hirsch, Barry E.; Riviere, Cameron N.

2012-01-01

Stapes footplate surgery is complex and delicate. This surgery is carried out in the middle ear to improve hearing. High accuracy is required to avoid critical tissues and structures near the surgical worksite. By suppressing the surgeon’s tremor during the operation, accuracy can be improved. In this paper, a fully handheld active micromanipulator known as Micron is evaluated for its feasibility for this delicate operation. An ergonomic handle, a custom tip, and a brace attachment were designed for stapes footplate surgery and tested in a fenestration task through a fixed speculum. Accuracy was measured during simulated surgery in two different scenarios: Micron off (unaided) and Micron on (aided), both with image guidance. Preliminary results show that Micron significantly reduces the mean position error and the mean duration of time spent in specified dangerous zones. PMID:23366167

Another cause for conductive hearing loss with present acoustic reflexes.

Science.gov (United States)

Ebert, Charles S; Zanation, Adam M; Buchman, Craig A

2008-11-01

There are numerous potential causes of conductive hearing loss (HL). It is important to obtain a thorough history and perform a complete examination, including audiometric testing and radiographic evaluation when necessary. In this report, we present a patient with an intact tympanic membrane, no history of ear disease or trauma who as an adult developed progressive, conductive HL because of an anomalous course of a dehiscent facial nerve. In the patient with a conductive HL and at least partially intact reflexes, superior semicircular canal dehiscence, fracture of the stapes superstructure proximal to the tendon, other third window phenomena, and now dehiscence of the facial nerve resulting in decreased mobility of the ossicular chain must be considered.

Pre-operative computed tomography evaluation of congenital aural atresia in children; Bilan tomodensitometrique pre-operatoire des aplasies majeures de l`oreille chez l`enfant

Energy Technology Data Exchange (ETDEWEB)

Lumbroso, C.; Sebag, G.; Argyropoulou, M.; Manach, Y.; Lallemand, D. [Hopital Necker-Enfants-Malades, 75 - Paris (France)

1995-04-01

To describe computed tomography (CT) findings in congenital aural atresia (CAA) and to illustrate the impact of these findings in the preoperative evaluation. A narrow bony external auditory canal (EAC) was present in 24% of the cases. In one of these cases, the EAC contained a cholesteatoma and was consequently a clear indication of surgery. An hyperpneumatized mastoid (22%), a posterior position of the temporo mandibular joint (16%), and a bulging medial temporal fossa (12%) made the operation much more difficult. The tympanic cavity was small in 68% of the cases, normal in 28% and absent in 4% of the cases without any detectable ossicular chain. Ossicular chain anomalies were present in 91% of the cases. This consisted most frequently of a fusion of the malleus and the incus (76%) with or without fusion of the tympanic wall (33%). Lateral and anterior displacement of the descending portion of the facial nerve was present in 62%. Oval and round windows were normal in 86% of the cases. A soft tissue opacity (33%) in the tympanic cavity made it difficult to evaluate the stapes, the incudo stapedial articulation, and the facial nerve. Simultaneous abnormalities of inner ear were exceptional. (authors). 9 refs., 8 figs.

[Comparative evaluation of vertigo in patients after stapedotomy and stapedectomy].

Science.gov (United States)

Harmat, Kinga; Thurén, Gergely; Simon, László; Nepp, Nelli; Németh, Adrienn; Gerlinger, Imre; Bakó, Péter

2017-09-01

The reason of gradually developing conductive hearing loss in otosclerotic patients is the ossification of the stapes footplate to the surrounding bony structures and the therapy of stapes fixation is mainly surgical. In stapedotomy the footplate of the stapes is fenestrated with laser and microdrill in a diameter of 0.8 mm, whereas in stapedectomy there is complete removal of the footplate followed by the reconstruction of the ossicular chain. In the early postoperative period, temporary vertigo is frequently recorded which significantly influences the recovery. In the Department of Otorhinolaryngology, University of Pécs both stapedectomy and stapedotomy were performed on a daily basis between 01.02.2010 and 15.03.2012. Our study focused on comparing the degree of postoperative vertigo after the two types of surgery. We hypothesized that the smaller fenestration of the stapes footplate during stapedotomy limits exposure to the inner ear reducing the severity of dizziness. Vertigo was evaluated subjectively with a retrospective questionnaire and objectively with static posturography. On the 1st postoperative day, significantly fewer patients reported vertigo in the stapedotomy group and with significantly lower intensity. Results of the questionnaire regarding the later postoperative period showed no significant differences between the groups. Based on the analysis of the posturography test results, no significant difference was detected between the postoperative stability of the two groups. Results of the questionnaire and the posturography showed no correlation. Posturography test results did not confirm the presence of subjective vertigo. Many factors may play a role in the development of vertigo after stapes surgery, but the type of intervention does not influence it. Orv Hetil. 2017; 158(38): 1503-1511.

Minimally traumatic stapes surgery for otosclerosis: Risk reduction of post-operative vertigo

Directory of Open Access Journals (Sweden)

An-Suey Shiao

2018-06-01

Full Text Available Background: The author (Dr. Shiao modified traditional stapes surgery (TSS specifically for patients with otosclerosis. The proposed technique, referred to as minimally traumatic stapes surgery (MTSS, reduces the risk of subjective discomfort (i.e. vertigo and tinnitus following surgery. This paper compares the effectiveness of MTSS with that of TSS. Methods: The medical records of patients with otosclerosis after stapes surgery (TSS or MTSS were analyzed. Outcome variables included post-operative vertigo, tinnitus, and hearing success. Multivariate logistic regression analysis was used to determine the correlation between surgical technique and outcome variables. Results: TSS was performed in 23 otosclerosis ears and MTSS was performed in 33 otosclerosis ears. The risk of post-operative vertigo was significantly lower among patients that underwent MTSS (27% than among those that underwent TSS (83%, p < 0.001. No differences in the incidence of tinnitus were observed between the two groups. Post-operative audiometric outcomes were also equivalent between the two groups. However, multivariate logistic regression analysis revealed a correlation between post-operative vertigo and surgical technique (p < 0.001. Conclusion: MTSS involves a lower risk of vertigo than does TSS. MTSS helps to prevent damage to the footplate, thereby reducing the risk of footplate floating. Therefore, MTSS provides a means to overcome some of the limitations associated with the narrow surgical field in Asian patients. Keywords: Footplate floating, Minimally traumatic, Otosclerosis, Stapes surgery, Vertigo

Comparison of ear-canal reflectance and umbo velocity in patients with conductive hearing loss: a preliminary study.

Science.gov (United States)

Nakajima, Hideko H; Pisano, Dominic V; Roosli, Christof; Hamade, Mohamad A; Merchant, Gabrielle R; Mahfoud, Lorice; Halpin, Christopher F; Rosowski, John J; Merchant, Saumil N

2012-01-01

The goal of the present study was to investigate the clinical utility of measurements of ear-canal reflectance (ECR) in a population of patients with conductive hearing loss in the presence of an intact, healthy tympanic membrane and an aerated middle ear. We also sought to compare the diagnostic accuracy of umbo velocity (VU) measurements and measurements of ECR in the same group of patients. This prospective study comprised 31 adult patients with conductive hearing loss, of which 14 had surgically confirmed stapes fixation due to otosclerosis, 6 had surgically confirmed ossicular discontinuity, and 11 had computed tomography and vestibular evoked myogenic potential confirmed superior semicircular canal dehiscence (SCD). Measurements on all 31 ears included pure-tone audiometry for 0.25 to 8 kHz, ECR for 0.2 to 6 kHz using the Mimosa Acoustics HearID system, and VU for 0.3 to 6 kHz using the HLV-1000 laser Doppler vibrometer (Polytec Inc, Waldbronn, Germany). We analyzed power reflectance |ECR| as well as the absorbance level = 10 × log10(1 - |ECR|). All measurements were made before any surgical intervention. The VU and ECR data were plotted against normative data obtained in a companion study of 58 strictly defined normal ears (). Small increases in |ECR| at low-to-mid frequencies (400-1000 Hz) were observed in cases with stapes fixation, while narrowband decreases were seen for both SCD and ossicular discontinuity. The SCD and ossicular discontinuity differed in that the SCD had smaller decreases at mid-frequency (∼1000 Hz), whereas ossicular discontinuity had larger decreases at lower frequencies (500-800 Hz). SCD tended to have less air-bone gap at high frequencies (1-4 kHz) compared with stapes fixation and ossicular discontinuity. The |ECR| measurements, in conjunction with audiometry, could successfully separate 28 of the 31 cases into the three pathologies. By comparison, VU measurements, in conjunction with audiometry, could successfully separate

Laser-assisted fixation of a nitinol stapes prosthesis.

Science.gov (United States)

Schrötzlmair, Florian; Suchan, Fabian; Pongratz, Thomas; Krause, Eike; Müller, Joachim; Sroka, Ronald

2018-02-01

Otosclerosis is an inner ear bone disease characterized by fixation of the stapes and consequently progressive hearing loss. One treatment option is the surgical replacement of the stapes by a prosthesis. When so called "smart materials" like nitinol are used, prosthesis fixation can be performed using a laser without manual crimping on the incus. However, specific laser-prosthesis interactions have not been described yet. The aim of the present study was to elucidate the thermo-mechanical properties of the NiTiBOND® prosthesis as a basis for handling instructions for laser-assisted prosthesis fixation. Closure of the NiTiBOND® prosthesis was induced ex vivo by either a diode laser emitting at λ = 940 nm or a CO 2 laser (λ = 10,600 nm). Total energy for closure was determined. Suitable laser parameters (pulse duration, power per pulse, distance between tip of the laser fiber and prosthesis) were assessed. Specific laser-prosthesis interactions were recorded. Especially the diode laser was found to be an appropriate energy source. A total energy deposit of 60 mJ by pulses in near contact application was found to be sufficient for prosthesis closure ex vivo. Energy should be transmitted through a laser fiber equipollent to the prosthesis band diameter. Specific deformation characteristics due to the zonal prosthesis composition have to be taken into account. NiTiBOND® stapes prosthesis can be closed by very little energy when appropriate energy sources like diode lasers are used, suggesting a relatively safe application in vivo. Lasers Surg. Med. 50:153-157, 2018. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

Computed tomography of the auditory ossicles

International Nuclear Information System (INIS)

Kurosaki, Yoshihisa; Hirai, Toshiko; Otsuji, Hideaki

1983-01-01

High resolution CT has become an important tool of radiographic assessment of the temporal bone. This study was undertaken to establish criteria for spatial relationship of the ossicles on axial projection. Normal CT of the fifty-seven temporal bones was reviewed. All parts of the malleus and incus were identified in all cases, while the head, the anterior crus and the posterior crus of the stapes were identified in 68.4 % (39/57), 5.3 % (3/57), 3.5 % (2/57), respectively. In none of the cases was the footplate of the stapes seen. The malleus manubrium and the incus long process aligned almost parallel to each other with being 28.0 0 (S.D. 6.5 0 ) and 26.9 0 (S.D. 5.7 0 ) to the coronal plane, respectively. The malleus head and the incus body and short process lied within the attic on the 28.0 0 (S.D. 3.9 0 ) angle to the sagittal plane. With the above-mentioned knowledge of the normal spatial alignment of the ossicles, one is able to detect subtle malalignment of the ossicular chain on axial CT alone. However, it should be kept in mind that coronal CT would usually be necessary to evaluate the incudostapedial joint as well as the stapes itself. Pathologic cases involving the ossicles were illustrated. (author)

Effects of middle ear quasi-static stiffness on sound transmission quantified by a novel 3-axis optical force sensor.

Science.gov (United States)

Dobrev, Ivo; Sim, Jae Hoon; Aqtashi, Baktash; Huber, Alexander M; Linder, Thomas; Röösli, Christof

2018-01-01

Intra-operative quantification of the ossicle mobility could provide valuable feedback for the current status of the patient's conductive hearing. However, current methods for evaluation of middle ear mobility are mostly limited to the surgeon's subjective impression through manual palpation of the ossicles. This study investigates how middle ear transfer function is affected by stapes quasi-static stiffness of the ossicular chain. The stiffness of the middle ear is induced by a) using a novel fiber-optic 3-axis force sensor to quantify the quasi-static stiffness of the middle ear, and b) by artificial reduction of stapes mobility due to drying of the middle ear. Middle ear transfer function, defined as the ratio of the stapes footplate velocity versus the ear canal sound pressure, was measured with a single point LDV in two conditions. First, a controlled palpation force was applied at the stapes head in two in-plane (superior-inferior or posterior-anterior) directions, and at the incus lenticular process near the incudostapedial joint in the piston (lateral-medial) direction with a novel 3-axis PalpEar force sensor (Sensoptic, Losone, Switzerland), while the corresponding quasi-static displacement of the contact point was measured via a 3-axis micrometer stage. The palpation force was applied sequentially, step-wise in the range of 0.1-20 gF (1-200 mN). Second, measurements were repeated with various stages of stapes fixation, simulated by pre-load on the stapes head or drying of the temporal bone, and with severe ossicle immobilization, simulated by gluing of the stapes footplate. Simulated stapes fixation (forced drying of 5-15 min) severely decreases (20-30 dB) the low frequency (4 kHz) response. Stapes immobilization (gluing of the footplate) severely reduces (20-40 dB) the low and mid frequency response (force (Force-displacement measurements around the incudostapedial joint showed quasi-static stiffness in the range of 200-500 N/m for normal middle

Outcome measures in stapes surgery: postoperative results are independent from preoperative parameters.

Science.gov (United States)

Koopmann, Mario; Weiss, Daniel; Savvas, Eleftherios; Rudack, Claudia; Stenner, Markus

2015-09-01

The aim of this study was to compare audiometric results before and after stapes surgery and identify potential prognostic factors to appropriately select patients with otosclerosis who will most likely benefit from surgery. We enrolled 126 patients with otosclerosis (162 consecutive ears) in our study who underwent stapes surgery between 2007 and 2012 at our institution. Preoperative and postoperative data including pure-tone audiometry, speech audiometry, stapedial reflex audiometry and surgical data were analyzed. The average preoperative air-bone gap (ABG) was 28.9 ± 8.6 dB. Male patients and patients older than 45 years of age had greater preoperative ABGs in comparison to females and younger patients. Postoperative ABGs were 11.2 ± 7.4 dB. The average ABG gain was 17.7 ± 11.1 dB. Preoperative audiometric data, age, gender and type of surgery did not influence the postoperative results. Stapes surgery offers predictable results independent from disease progression or patient-related factors. While absolute values of hearing improvement are instrumental in reflecting audiometric results of a cohort, relative values better reflect individual's audiometric data resembling the patient's benefit.

An “Uncrimped” SMart Stapes Prosthesis: A Cause of Late Hearing Deterioration in Otosclerosis

Directory of Open Access Journals (Sweden)

Premjit S. Randhawa

2012-01-01

Full Text Available Statement of Problem. Stapedotomy is the treatment of choice for otosclerosis. Numerous techniques and prosthesis are available to perform this procedure. Success rates of surgery vary from 17% to 80%, and revision surgery carries an increased risk of complications as well as poorer hearing outcomes. Method of Study. Case report. Results. We report the first case of uncrimping of a SMart stapes prosthesis with no lateral displacement as a cause of late failure despite successful crimping and improvement in audiological outcomes after initial surgery. Conclusion. The SMart stapes prosthesis is widely used and has been shown to be safe and provide good hearing outcomes. Displacement of a stapes prosthesis is the commonest cause of failure. Our case shows that deterioration of hearing thresholds can occur from uncrimping of the prosthesis with no displacement. It is important to improve our understanding of stapedotomy failure as revision procedures are associated with poorer outcomes.

Autosomal dominant stapes fixation, syndactyly, and symphalangism in a family with NOG mutation

DEFF Research Database (Denmark)

Westergaard-Nielsen, Marie; Amstrup, Tine; Wanscher, Jens Højberg

2018-01-01

bilateral conductive hearing loss. Three patients were treated with stapedectomy, on one or both ears, due to fixation of stapes. All the affected members had syndactyly and symphalangism. A not previously reported mutation in the NOG gene (c.688_699del, p.Cys230_Cys232delins11) was found to segregate...... with the stapes fixation, syndactyly, and symphalangism. p.Cys230_Cysdelins11 was classified as likely pathogenic according to guidelines from the American College of Medical Genetics and Genomics. Conclusion: The clinical presentation of the reported mutation corresponds with previous case reports of families...

Postinflammatory ossicular fixation: CT analysis with surgical correlation

International Nuclear Information System (INIS)

Swartz, J.D.; Wolfson, R.J.; Marlowe, F.I.; Popky, G.L.

1985-01-01

Postinflammatory ossicular fixation is a common problem encountered by the otologic surgeon upon exploration because of conductive hearing loss in patients with chronic otitis media. These nonotosclerotic noncongenital lesions take three pathologic forms: fibrous tissue fixation (chronic adhesive otitis media), hyalinization of collagen (tympanosclerosis), and new bone formation (fibro-osseous sclerosis). More than 300 patients with the clinical diagnosis of chronic otitis media have been examined. This study encompasses 23 proved cases

Stapes surgery in residency: the UFPR clinical hospital experience.

Science.gov (United States)

Caldart, Adriano Ulisses; Terruel, Igor; Enge, Dair Jocely; Kurogi, Adriana Sayuri; Buschle, Maurício; Mocellin, Marcos

2007-01-01

Surgery of the stapedius remains the established treatment for otosclerosis. Recent publications have showed that success in surgeries done by residents have decreased and hearing results are worse than those obtained by experienced otologic surgeons. To evaluate the experience of the otorhinolaryngology unit, Parana University, relative to stapes surgery done in the residency training program. A retrospective study of 114 stapes surgeries done in the past 9 years in 96 patients. Audiometric results were analysed according to the Committee on Hearing and Equilibrium guidelines and the Amsterdam Hearing Evaluation Plots. The improvement of the airway postoperative gap and thresholds were taken into account. 96 patients were included, most of them female adults (67.7%) and white (93.7%). Stapedectomy was done in 50.9% of cases, mostly under local anesthesia and sedation (96.5%), using mostly the Teflon prosthesis (37.7%). The surgical success rate was 50.88%, there was an 11.4% complication rate. Postoperative hearing gains considered as surgical success were inferior to published results in the literature, done by experienced surgeons.

Total Ossicular Replacement Prosthesis: A New Fat Interposition Technique

Directory of Open Access Journals (Sweden)

Issam Saliba

2018-01-01

Full Text Available Objective: To compare audiometric results between the standard total ossicular replacement prosthesis (TORP-S and a new fat interposition total ossicular replacement prosthesis (TORP-F in pediatric and adult patients and to assess the complication and the undesirable outcome. Study design: This is a retrospective study. Methods: This study included 104 patients who had undergone titanium implants with TORP-F and 54 patients who had undergone the procedure with TORP-S between 2008 and 2013 in our tertiary care centers. The new technique consists of interposing a fat graft between the 4 legs of the universal titanium prosthesis (Medtronic Xomed Inc, Jacksonville, FL, USA to provide a more stable TORP in the ovale window niche. Normally, this prosthesis is designed to fit on the stapes’ head as a partial ossicular replacement prosthesis. Results: The postoperative air-bone gap less than 25 dB for the combined cohort was 69.2% and 41.7% for the TORP-F and the TORP-S groups, respectively. The mean follow-up was 17 months postoperatively. By stratifying data, the pediatric cohort shows 56.5% in the TORP-F group (n = 52 compared with 40% in the TORP-S group (n = 29. However, the adult cohort shows 79.3% in the TORP-F group (n = 52 compared with 43.75% in the TORP-S group (n = 25. These improvements in hearing were statistically significant. There were no statistically significant differences in the speech discrimination scores. The only undesirable outcome that was statistically different between the 2 groups was the prosthesis displacement: 7% in the TORP-F group compared with 19% in the TORP-S group ( P  = .03. Conclusions: The interposition of a fat graft between the legs of the titanium implants (TORP-F provides superior hearing results compared with a standard procedure (TORP-S in pediatric and adult populations because of its better stability in the oval window niche.

Changes to Hearing Levels Over the First Year After Stapes Surgery: An Analysis of 139 Patients.

Science.gov (United States)

Nash, Robert; Patel, Bhavesh; Lavy, Jeremy

2018-06-15

Stapes surgery is performed for hearing restoration in patients with otosclerosis. Results from stapes surgery are good, although a small proportion will have a persistent conductive hearing loss and will consider revision surgery. The timing of such surgery depends on expected changes to hearing thresholds during the postoperative period. We performed a retrospective case series analysis of a database of outcomes from stapes surgery performed between July 26, 2013 and March 11, 2016 at one center. Hearing outcomes over the year subsequent to surgery were recorded. There was a significant improvement in hearing outcomes between the postoperative visit at 6 weeks (mean air-bone gap 6.0 dB) and the hearing outcome at 6 months (mean air-bone gap 3.3 dB) (p < 0.01). This improvement was maintained at 12 months (mean air-bone gap 3.1 dB), although there were individual patients whose hearing outcome improved or deteriorated during this period. Improvements in air conduction thresholds mirrored improvements in air-bone gap measurements. Patients with an initial suboptimal or poor result after stapes surgery may observed improvement in their hearing thresholds in the year after surgery. These patients may have large preoperative air-bone gaps, and have a trend to have obliterated footplates. Revision surgery should not be considered until at least 6 months after primary surgery.

Modifications to a 3D-printed temporal bone model for augmented stapes fixation surgery teaching.

Science.gov (United States)

Nguyen, Yann; Mamelle, Elisabeth; De Seta, Daniele; Sterkers, Olivier; Bernardeschi, Daniele; Torres, Renato

2017-07-01

Functional outcomes and complications in otosclerosis surgery are governed by the surgeon's experience. Thus, teaching the procedure to residents to guide them through the learning process as quickly as possible is challenging. Artificial 3D-printed temporal bones are replacing cadaver specimens in many institutions to learn mastoidectomy, but these are not suitable for middle ear surgery training. The goal of this work was to adapt such an artificial temporal bone to aid the teaching of otosclerosis surgery and to evaluate this tool. We have modified a commercially available 3D-printed temporal bone by replacing the incus and stapes of the model with in-house 3D-printed ossicles. The incus could be attached to a 6-axis force sensor. The stapes footplate was fenestrated and attached to a 1-axis force sensor. Six junior surgeons (residents) and seven senior surgeons (fellows or consultants) were enrolled to perform piston prosthesis placement and crimping as performed during otosclerosis surgery. The time required to perform the tasks and the forces applied to the incus and stapes were collected and analyzed. No statistically significant differences were observed between the junior and senior groups for time taken to perform the tasks and the forces applied to the incus during crimping and placement of the prosthesis. However, significantly lower forces were applied to the stapes by the senior surgeons in comparison with the junior surgeons during prosthesis placement (junior vs senior group, 328 ± 202.9 vs 80 ± 99.6 mN, p = 0.008) and during prosthesis crimping (junior vs senior group, 565 ± 233 vs 66 ± 48.6 mN, p = 0.02). We have described a new teaching tool for otosclerosis surgery based on the modification of a 3D-printed temporal bone to implement force sensors on the incus and stapes. This tool could be used as a training tool to help the residents to self-evaluate their progress with recording of objective measurements.

A comparison of high resolution CT scan of temporal bone and operative findings in middle ear cholesteatoma

Energy Technology Data Exchange (ETDEWEB)

Kweon, Tae Beom; Seong, Hun; Cheon, Mal Soon; Kim, Hack Jin; Jang, Keung Jae; Chun, Byung Hee [Dae Dong General Hospital, Busan (Korea, Republic of)

1993-09-15

To evaluate the value of HRCT imaging in middle ear cholesteatoma, we prospectively analysed the CT images in 28 surgically proven cases with cholesteatomas regarding main site of lesion, ossicular change, facial nerve exposure and fistula formation. The most common main site of lesion was the epitympanum (92.8%). The results of sensitivity, positive predictability, and accuracy by CT imagings were as follows: for ossicular involvement, 94.1%, 88.8%, and 86.2% in malleus, 96.0%, 88.8%, and 85.7% in incus, 81.2%, 81.2%, and 78.5% in stapes; for facial nerve exposure, 66.6%, 57.1%, and 81.2%: for fistula formation, 100%, 75.0%, and 96.4%, respectively. In conclusion, the temoral bone HRCT imaging is an accurate preoperative method in detecting main lesion site, ossicular involvement, fistula formation. Because of the low sensitivity and positive predictability in detecting facial nerve exposure, it is necessary to correlate the HRCT images with the clinical status.

An analysis of the air-bone gap closure obtained by a crimping and a non-crimping titanium stapes prosthesis in otosclerosis

NARCIS (Netherlands)

Tange, Rinze A.; Grolman, Wilko

2008-01-01

OBJECTIVE: To evaluate the hearing results of stapes surgery with two different titanium stapes prostheses. A crimping and a non-crimping prosthesis. METHODS: Retrospective analyses were carried out on the pre- and postoperative hearing results obtained after 126 primary stapedotomies with two

Prosthetic ossicular on middle ear: what look?; Protese ossicular em orelha media: o que procurar?

Energy Technology Data Exchange (ETDEWEB)

Cabral, Christiane Pena; Ramos, Frederico Rocha Henriques; Pires, Diego Demolinari; Antunes, Augusto Braga Fernandes; Motta, Emilia Guerra Pinto Coelho; Ribeiro, Marcelo Almeida; Moreira, Wanderval; Diniz, Renata Lopes Furletti Caldeira [Hospital Mater Dei, Belo Horizonte, MG (Brazil)

2010-07-01

The aim of this essay was to demonstrate the normal and pathological CT findings of the post-operative imaging of patients underwent ossicular prosthesis implants. The stapedectomy replaced by prosthesis is considered the 'gold standard' treatment of patients with oval window closure, related to otosclerosis or other inflammatory conditions. Several types of prosthesis are available and the choice depends on the extension of the disease or the surgeon's preferences. Based on extensive literature review, the normal postoperative findings, as well as some surgery inherent complications were described, including among others: perforation of the tympanic membrane, necrosis associated with subluxation/extrusion of the prosthesis, granuloma/cholesteatoma or periprosthetic fibrosis, perilymphatic fistula, facial nerve damage, among other. The knowledge of post-operative and related complications CT findings is extremely useful for head and neck radiologist, but it is essential for an assertive diagnoses a close clinical correlation. (author)

An internally validated prognostic model for success in revision stapes surgery for otosclerosis.

Science.gov (United States)

Wegner, Inge; Vincent, Robert; Derks, Laura S M; Rauh, Simone P; Heymans, Martijn W; Stegeman, Inge; Grolman, Wilko

2018-03-09

To develop a prediction model that can accurately predict the chance of success following revision stapes surgery in patients with recurrent or persistent otosclerosis at 2- to 6-months follow-up and to validate this model internally. A retrospective cohort study of prospectively gathered data in a tertiary referral center. The associations of 11 prognostic factors with treatment success were tested in 705 cases using multivariable logistic regression analysis with backward selection. Success was defined as a mean air-bone gap closure to 10 dB or less. The most relevant predictors were used to derive a clinical prediction rule to determine the probability of success. Internal validation by means of bootstrapping was performed. Model performance indices, including the Hosmer-Lemeshow test, the area under the receiver operating characteristics curve (AUC), and the explained variance were calculated. Success was achieved in 57.7% of cases at 2- to 6-months follow-up. Certain previous surgical techniques, primary causes of failure leading up to revision stapes surgery, and positions of the prosthesis placed during revision surgery were associated with higher success percentages. The clinical prediction rule performed moderately well in the original dataset (Hosmer-Lemeshow P = .78; AUC = 0.73; explained variance = 22%), which slightly decreased following internal validation by means of bootstrapping (AUC = 0.69; explained variance = 13%). Our study established the importance of previous surgical technique, primary cause of failure, and type of the prosthesis placed during the revision surgery in predicting the probability of success following stapes surgery at 2- to 6-months follow-up. 2b. Laryngoscope, 2018. © 2018 The American Laryngological, Rhinological and Otological Society, Inc.

Short-Term Audiological Results of Diode Laser in Comparison with Manual Perforation in Stapes Surgery.

Science.gov (United States)

Hamerschmidt, Rogerio; Saab, Stephanie Sbizera; Carvalho, Bettina; Carmo, Carolina do

2018-04-01

Introduction  Diode laser is a new alternative in stapes surgery for otosclerosis. The present study is the first to compare the short-term results of the surgery performed using diode laser to those obtained through the conventional fenestration technique. Objective  To use audiometry to establish a comparative analysis between the functional results obtained through surgery for otosclerosis using diode laser and the conventional technique. Method  Audiometric evaluation of 12 patients submitted to stapes surgery for otosclerosis, using diode laser or conventional fenestration by needle and drills, between 2014 and 2015. Each group was composed of 6 patients. Pre and post-operative measures were compared for three months in both groups. The speech recognition threshold, the air and bone conduction threshold, as well as the gap between them at 500 Hz, 1 KHz, 2 KHz and 4 KHz were measured. Results  Significant difference in bone conduction and SRT was observed when compared post- and preoperative results in the diode group. However diode and conventional technique groups presented significant differences in air conduction and air-bone gap, suggesting that both can provide functional improvement. Conclusion  Laser stapedotomy is a safe technique with good results. Both laser surgery and the conventional technique have improved the hearing of patients with a discreet advantage for the diode laser. Further prospective and randomized clinical trials are required to disclose all possible benefits of the stapes surgery using diode laser.

Prosthetic ossicular on middle ear: what look?

International Nuclear Information System (INIS)

Cabral, Christiane Pena; Ramos, Frederico Rocha Henriques; Pires, Diego Demolinari; Antunes, Augusto Braga Fernandes; Motta, Emilia Guerra Pinto Coelho; Ribeiro, Marcelo Almeida; Moreira, Wanderval; Diniz, Renata Lopes Furletti Caldeira

2010-01-01

The aim of this essay was to demonstrate the normal and pathological CT findings of the post-operative imaging of patients underwent ossicular prosthesis implants. The stapedectomy replaced by prosthesis is considered the 'gold standard' treatment of patients with oval window closure, related to otosclerosis or other inflammatory conditions. Several types of prosthesis are available and the choice depends on the extension of the disease or the surgeon's preferences. Based on extensive literature review, the normal postoperative findings, as well as some surgery inherent complications were described, including among others: perforation of the tympanic membrane, necrosis associated with subluxation/extrusion of the prosthesis, granuloma/cholesteatoma or periprosthetic fibrosis, perilymphatic fistula, facial nerve damage, among other. The knowledge of post-operative and related complications CT findings is extremely useful for head and neck radiologist, but it is essential for an assertive diagnoses a close clinical correlation. (author)

High resolution computed tomography of auditory ossicles

International Nuclear Information System (INIS)

Isono, M.; Murata, K.; Ohta, F.; Yoshida, A.; Ishida, O.; Kinki Univ., Osaka

1990-01-01

Auditory ossicular sections were scanned at section thicknesses (mm)/section interspaces (mm) of 1.5/1.5 (61 patients), 1.0/1.0 (13 patients) or 1.5/1.0 (33 patients). At any type of section thickness/interspace, the malleal and incudal structures were observed with almost equal frequency. The region of the incudostapedial joint and each component part of the stapes were shown more frequently at a section interspace of 1.0 mm than at 1.5 mm. The visualization frequency of each auditory ossicular component on two or more serial sections was investigated. At a section thickness/section interspace of 1.5/1.5, the visualization rates were low except for large components such as the head of the malleus and the body of the incus, but at a slice interspace of 1.0 mm, they were high for most components of the auditory ossicles. (orig.)

Three-dimensional multislice CT imaging of otitis media

International Nuclear Information System (INIS)

Suzuki, Miyako; Yoshikawa, Hiroshi; Hosokawa, Akira; Furukawa, Tomoyasu; Ichikawa, Ginichiro; Wada, Akihiro; Ando, Ichiro

2002-01-01

In recent years, the multislice CT system has come into practical use that enables table movement of half mm, resulting in a significant improvement in resolution. The use of this CT system enables to depict the entire auditory ossicles, including the stapes. 3D reconstruction was performed using helical CT data in 5 patients with chronic otitis media and 5 patients with cholesteatoma. An Aquilion Multi (Toshiba) multislice helical CT scanner and a Xtension (Toshiba) image workstation were used in this study. We demonstrated the 3D display with axial, coronal and sagittal images. Compared with the normal ears, it was necessary to set a higher threshold for the affected ears. It is important to select suitable threshold for demonstration of 3D images optimally. Bone destruction of the stapes was confirmed at surgery in 2 ears. The stapes was observed at 3D-CT imaging in other 18 ears. It was found that the 3D images of the ossicular destruction in ears with cholesteatoma were consistent with surgical findings. It is therefore concluded that 3D imaging of the middle ear using a multislice CT scanner is clinically useful. (author)

Three-dimensional multislice CT imaging of otitis media

Energy Technology Data Exchange (ETDEWEB)

Suzuki, Miyako [Yanagibasi Hospital, Tokyo (Japan); Yoshikawa, Hiroshi; Hosokawa, Akira; Furukawa, Tomoyasu; Ichikawa, Ginichiro [Juntendo Univ., Tokyo (Japan). School of Medicine; Wada, Akihiro; Ando, Ichiro [Juntendo Univ., Chiba (Japan). Urayasu Hospital

2002-07-01

In recent years, the multislice CT system has come into practical use that enables table movement of half mm, resulting in a significant improvement in resolution. The use of this CT system enables to depict the entire auditory ossicles, including the stapes. 3D reconstruction was performed using helical CT data in 5 patients with chronic otitis media and 5 patients with cholesteatoma. An Aquilion Multi (Toshiba) multislice helical CT scanner and a Xtension (Toshiba) image workstation were used in this study. We demonstrated the 3D display with axial, coronal and sagittal images. Compared with the normal ears, it was necessary to set a higher threshold for the affected ears. It is important to select suitable threshold for demonstration of 3D images optimally. Bone destruction of the stapes was confirmed at surgery in 2 ears. The stapes was observed at 3D-CT imaging in other 18 ears. It was found that the 3D images of the ossicular destruction in ears with cholesteatoma were consistent with surgical findings. It is therefore concluded that 3D imaging of the middle ear using a multislice CT scanner is clinically useful. (author)

Cartilage island on stapes: autologous PORP in the hypoventilated middle ear.

Science.gov (United States)

Hess-Erga, Jeanette; Engelen, Bart Lambertus Henricus Jozef; Vassbotn, Flemming Slinning

2017-04-01

The most common technique in sound restoration of the middle ear is prosthetic surgery. Hypoventilation of the middle ear may cause adhesive otitis or atelectasis resulting in a higher risk of prosthetic extrusion rate and recurrence of the underlying cholesteatoma. We report long-term results using an island of tragal cartilage as an autologous PORP in selected patients with poor middle ear ventilation. Retrospective chart reviews were performed for procedures involving 52 patients between year 2000 and 2009. All patients that underwent surgery using tragal cartilage interposed between the suprastructure of the stapes and the tympanic membrane were included in this study. Audiological parameters using four frequencies, 0.5, 1, 2 and 3 kHz, according to AAO-HNS guidelines, were assessed pre-and postoperatively. The hearing results on different PTA frequencies were also investigated. We report long-term follow-up of patients with hypoventilated middle ear with a success rate of 71% (ABG <20%). With regards to the ABG, the low frequency component (5 and 1 kHz) showed a significantly (p < 0.05) larger improvement of mean values after surgery as compared to the high-frequency component (2 and 3 kHz). Cartilage island PORP on stapes is a stable and efficient method for selected patients with chronic middle ear disease.

Ranking of CT in persistent vertigo after implantation of stapes prostheses

International Nuclear Information System (INIS)

Koesling, S.; Woldag, K.; Meister, E.F.; Reschke, I.; Schulz, H.G.

1995-01-01

10 of 150 patients had persistent vertigo after implanation of stapes prostheses. These patients were evaluated by high resolution CT in the axial and coronal plane. Scans showed in all cases findings which related to the symptoms. The CT findings were proved intraoperatively in 9 cases. A new indirect sign of a perilymphatic fistula is described in form of an air bulla at the end of the prosthesis. Retympanotomy could be planned better with the help of HR-CT. (orig.) [de

Cochlin-tomoprotein (CTP) detection test identified perilymph leakage preoperatively in revision stapes surgery.

Science.gov (United States)

Kataoka, Yuko; Ikezono, Tetsuo; Fukushima, Kunihiro; Yuen, Koji; Maeda, Yukihide; Sugaya, Akiko; Nishizaki, Kazunori

2013-08-01

Perilymphatic fistula (PLF) is defined as an abnormal leakage between perilymph from the labyrinth to the middle ear. Symptoms include hearing loss, tinnitus, and vertigo. The standard mode of PLF detection is intraoperative visualization of perilymph leakage and fistula, which ostensibly confirms the existence of PLF. Other possible methods of diagnosis include confirmation of pneumolabyrinth via diagnostic imaging. Recently, a cochlin-tomoprotein (CTP) detection test has been developed that allows definitive diagnosis of PLF-related hearing loss. We report the case of a 45-year-old man who presented with right-sided tinnitus, hearing loss, and dizziness 30 years after stapes surgery. Middle ear lavage was performed after myringotomy. A preoperative diagnosis of PLF was reached using the CTP detection test. Intraoperative observations included a necrotic long process of the incus, displaced wire piston, and fibrous tissue in the oval window. Perilymph leakage was not evident. The oval window was closed with fascia, and vertigo disappeared within 2 weeks postoperatively. When PLF is suspected after stapes surgery, the CTP detection test can be a useful, highly sensitive, and less invasive method for preoperative diagnosis. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

Evaluation of high-resolution CT after tympanoplasty

International Nuclear Information System (INIS)

Torizuka, T.; Hayakawa, K.; Sato, Y.; Tanaka, F.; Okuno, Y.

1991-01-01

This paper reports on the condition of the middle ear cavity following tympanoplasty which is always of great interest to radiologists and otosurgeons. This study consisted of 21 patients who had various types of tympanoplasty (types I-IV) for chronic otitis media and cholesteatoma by using high-resolution CT (HRCT). HRCT following tympanoplasty was a valuable method for assessing the middle ear aeration and the state of ossicular reconstruction, including stapes prosthesis, although in some cases of soft-tissue mass in the middle ear it was necessary to correlate with clinical findings in order to differentiate between granulation and recurrence

Congenital stapes malformation: Rare conductive hearing loss in a patient with Waardenburg syndrome.

Science.gov (United States)

Melzer, Jonathan M; Eliason, Michael; Conley, George S

2016-04-01

Waardenburg syndrome is a known autosomal dominant cause of congenital hearing loss. It is characterized by a distinctive phenotypic appearance and often involves sensorineural hearing loss. Temporal bone abnormalities and inner ear dysmorphisms have been described in association with the disease. However, middle ear abnormalities as causes of conductive hearing loss are not typically seen in Waardenburg syndrome. We discuss a case of an 8-year-old female who meets diagnostic criteria for Waardenburg syndrome type 3 and who presented with a bilateral conductive hearing loss associated with congenital stapes fixation. We discuss management strategy in this previously unreported phenotype. © 2015 The American Laryngological, Rhinological and Otological Society, Inc.

Endoscopic middle ear exploration in pediatric patients with conductive hearing loss.

Science.gov (United States)

Carter, John M; Hoff, Stephen R

2017-05-01

To describe our indications, findings, and outcomes for transcanal endoscopic middle ear exploration in pediatric patients with conductive hearing loss of unknown etiology, without effusions. Prospective case series for all pediatric patients undergoing totally endoscopic transcanal middle ear exploration between April 2012 and October 2015 at a pediatric tertiary care referral hospital. Demographic data, operative findings, and hearing results were reviewed. 21 cases were performed in 20 ears (1 revision). Average age at surgery was 7.98 years and average follow up was 2.1 years. Middle ear pathology identified on CT imaging was confirmed in 55% of cases while identified in 45% of cases where pre-operative imaging was non-diagnostic. 6/20 patients (30%) had an ossicular deformity. 8/20(40%) had bony ossicular fixation. 5/20(25%) had ossicular discontinuity. 2/20(10%) had facial nerve dehiscence impinging on the stapes. 15% had adhesive myringosclerosis or severe granulation causing hearing loss. Prosthetic ossiculoplasty was done in 7/21 (33.3%) of the cases, with 1 TORP, 3 PORPs, and 3 IS joint replacements. Imaging was predictive of intra-operative findings in 13/20 cases (55%). Trainees assisted in 16/21(76%) of cases. The average improvement of PTA was 11.65 dB (range -10 to 36.25), and the average ABG improved 10.19 (range -11.25 to 28.75). There were no perioperative complications or adverse events. The endoscopic transcanal approach for middle ear exploration offers excellent visualization and is one of the best applications for the endoscopes in pediatric otology cases. This is particularly helpful for "unexplained" conductive hearing loss where ossicular deformity/fixation/discontinuity is suspected. The etiology of the conductive hearing loss was definitively found in 100% of cases, and can be repaired in the same sitting when applicable. Copyright © 2017 Elsevier B.V. All rights reserved.

Virtual CT endoscopy of the tympanic cavity - early observation

International Nuclear Information System (INIS)

Spryszynski, P.

2002-01-01

In recent times the invention of the bionic ear' and other numerous technological advances have seen many patients have their hearing either restored or instated for the first time New challenges and pathologies are being met and overcome all the time One of the challenges has been to verify the structural soundness of the ossicular chain and the structures of the tympanic cavity Congenital deafness can be caused by a congenital malformation of a bone in the ossicular chain or a deformity of any of the ligaments or membranes forming the tympanic cavity. The advent of rapid resolution computerised tomography (CT) scanning has allowed clinicians to view minute structures, otherwise thought impossible to image. This paper discusses a recently developed application and its limitations in the imaging of the structure of the middle ear and the ossicular chain. Copyright (2002) Australian Institute of Radiography

The evaluation of HRCT in the diagnosis of chronic otitis and mastoiditis

International Nuclear Information System (INIS)

Tang Yong; Zhao Jun; Liu Fangying; Zhang Xuelin

2005-01-01

Objective: To explore the value of' HRCT in the diagnosis of chronic otitis and mastoiditis. Method: Thirty-five patients with chronic otitis and mastoiditis received high resolution CT scan (HRCT). Results: (1) In cases of cholesteatoma, the mass was seen in tympanic sinus and the tympanum area; where the positive rate of' drum damage was 92% and most of the damage of substantia ossea involved the adjacent tissue. The positive rate of the disappearance, damage and cirrhosis of otosteon was 94% in patients with granuloma-type mastoiditis. The damage of eardrum wall was revealed in 15% cases of granuloma-type, in which ossicular chain was revealed wrapped with granulation tissue. The damage of ossicular chain was 23% in cases of granuloma-type. In cases of simple type, the damage of eardrum wall and the substantia ossea adjacent the ossicular chain was rare, and there was no mass. Conclusions: The HRCT is useful in the diagnosis of chronic mastoiditis. (authors)

Differential Intracochlear Sound Pressure Measurements in Human Temporal Bones with an Off-the-Shelf Sensor

Directory of Open Access Journals (Sweden)

Martin Grossöhmichen

2016-01-01

Full Text Available The standard method to determine the output level of acoustic and mechanical stimulation to the inner ear is measurement of vibration response of the stapes in human cadaveric temporal bones (TBs by laser Doppler vibrometry. However, this method is reliable only if the intact ossicular chain is stimulated. For other stimulation modes an alternative method is needed. The differential intracochlear sound pressure between scala vestibuli (SV and scala tympani (ST is assumed to correlate with excitation. Using a custom-made pressure sensor it has been successfully measured and used to determine the output level of acoustic and mechanical stimulation. To make this method generally accessible, an off-the-shelf pressure sensor (Samba Preclin 420 LP, Samba Sensors was tested here for intracochlear sound pressure measurements. During acoustic stimulation, intracochlear sound pressures were simultaneously measurable in SV and ST between 0.1 and 8 kHz with sufficient signal-to-noise ratios with this sensor. The pressure differences were comparable to results obtained with custom-made sensors. Our results demonstrated that the pressure sensor Samba Preclin 420 LP is usable for measurements of intracochlear sound pressures in SV and ST and for the determination of differential intracochlear sound pressures.

The clinical efficacy of 1 mm-slice CT of the middle ear

International Nuclear Information System (INIS)

Noda, Kazuhiro; Noiri, Teruhisa; Doi, Katsumi; Koizuka, Izumi; Tanaka, Hisashi; Mishiro, Yasuo; Okumura, Shin-ichi; Kubo, Takeshi

2000-01-01

The efficacy of the preoperative 1 mm-slice CT for evaluating the condition of the ossicular chain and the facial canal was assessed. CT findings were compared with the operative findings of middle ears in 120 cases of chronic otitis media or cholesteatoma that underwent tympanoplasty. The reliability of 1 mm-slice CT in detecting any defect of the ossicular chain was much superior to those of 2 mm-slice CT previously reported, and the difference between them is essential for preoperative information. On the other hand, thinner slice than 1 mm may be unnecessary, especially in routine use. (author)

The clinical efficacy of 1 mm-slice CT of the middle ear

Energy Technology Data Exchange (ETDEWEB)

Noda, Kazuhiro; Noiri, Teruhisa [Kawanishi Municipal Hospital, Hyogo (Japan); Doi, Katsumi; Koizuka, Izumi; Tanaka, Hisashi; Mishiro, Yasuo; Okumura, Shin-ichi; Kubo, Takeshi

2000-02-01

The efficacy of the preoperative 1 mm-slice CT for evaluating the condition of the ossicular chain and the facial canal was assessed. CT findings were compared with the operative findings of middle ears in 120 cases of chronic otitis media or cholesteatoma that underwent tympanoplasty. The reliability of 1 mm-slice CT in detecting any defect of the ossicular chain was much superior to those of 2 mm-slice CT previously reported, and the difference between them is essential for preoperative information. On the other hand, thinner slice than 1 mm may be unnecessary, especially in routine use. (author)

Tympanoplasty with ionomeric cement

DEFF Research Database (Denmark)

Kjeldsen, A D; Grøntved, A M

2000-01-01

with isolated erosion of the long incus process have been treated with a new surgical technique in which the ossicular chain was rebuilt with ionomeric cement. The results in hearing performance (mean pure-tone average (PTA) 0.5, 1 and 2 kHz) were evaluated pre- and post-surgery, and compared to those...... of > 10 dB, in 4 there was a slight improvement and in 2 a decline. The difference was not statistically significant. Hearing improvement using ionomeric cement in type II tympanoplasty was satisfactory. Reconstruction of the ossicular chain with ionomeric cement is recommended, as the procedure is easy...

Controlled exploration of the effects of conductive hearing loss on wideband acoustic immittance in human cadaveric preparations.

Science.gov (United States)

Merchant, Gabrielle R; Merchant, Saumil N; Rosowski, John J; Nakajima, Hideko Heidi

2016-11-01

Current clinical practice cannot distinguish, with any degree of certainty, the multiple pathologies that produce conductive hearing loss in patients with an intact tympanic membrane and a well-aerated middle ear without exploratory surgery. The lack of an effective non-surgical diagnostic procedure leads to unnecessary surgery and limits the accuracy of information available during pre-surgical consultations with the patient. A non-invasive measurement to determine the pathology responsible for a conductive hearing loss prior to surgery would be of great value. This work investigates the utility of wideband acoustic immittance (WAI), a non-invasive measure of middle-ear mobility, in the differential diagnosis of pathologies responsible for conductive hearing loss. We focus on determining whether power reflectance (PR), a derivative of WAI, is a possible solution to this problem. PR is a measure of the fraction of sound power reflected from the middle ear when a sound stimulus is presented to the ear canal. PR and other metrics of middle-ear performance (such as ossicular motion via laser Doppler vibrometry) were measured in well-controlled human temporal bone preparations with simulated pathologies. We report measurements before and after simulation of stapes fixation (n = 8), malleus fixation (n = 10), ossicular disarticulation (n = 10), and superior canal dehiscence (n = 8). Our results are consistent with the small set of previously published reflectance measurements made in temporal bones and patients. In this present study, these temporal bone experiments with different middle- and inner-ear pathologies were compared to the initial normal state by analyzing both WAI and ossicular motion, demonstrating that WAI can be a valuable tool in the diagnosis of conductive hearing loss. Copyright © 2016 Elsevier B.V. All rights reserved.

Ear surgery techniques results on hearing threshold improvement

Directory of Open Access Journals (Sweden)

Farhad Mokhtarinejad

2013-01-01

Full Text Available Background: Bone conduction (BC threshold depression is not always by means of sensory neural hearing loss and sometimes it is an artifact caused by middle ear pathologies and ossicular chain problems. In this research, the influences of ear surgeries on bone conduction were evaluated. Materials and Methods: This study was conducted as a clinical trial study. The ear surgery performed on 83 patients classified in four categories: Stapedectomy, tympanomastoid surgery and ossicular reconstruction partially or totally; Partial Ossicular Replacement Prosthesis (PORP and Total Ossicular Replacement Prosthesis (TORP. Bone conduction thresholds assessed in frequencies of 250, 500, 1000, 2000 and 4000 Hz pre and post the surgery. Results: In stapedectomy group, the average of BC threshold in all frequencies improved approximately 6 dB in frequency of 2000 Hz. In tympanomastoid group, BC threshold in the frequency of 500, 1000 and 2000 Hz changed 4 dB (P-value < 0.05. Moreover, In the PORP group, 5 dB enhancement was seen in 1000 and 2000 Hz. In TORP group, the results confirmed that BC threshold improved in all frequencies especially at 4000 Hz about 6.5 dB. Conclusion: In according to results of this study, BC threshold shift was seen after several ear surgeries such as stapedectomy, tympanoplasty, PORP and TORP. The average of BC improvement was approximately 5 dB. It must be considered that BC depression might happen because of ossicular chain problems. Therefore; by resolving middle ear pathologies, the better BC threshold was obtained, the less hearing problems would be faced.

Relapsing polychondritis associated with bilateral stapes footplate fixation: a case report

Directory of Open Access Journals (Sweden)

Takwoingi Yohanna M

2009-09-01

Full Text Available Abstract Introduction Relapsing polychondritis is a rare multisystem autoimmune disease of uncertain etiology characterized by recurrent episodes of inflammation and progressive destruction of cartilaginous tissues. Its respiratory, cardiovascular, renal and neurological complications are life-threatening, and it is thus important to recognize the disease and its complications early. Relapsing polychondritis may follow a slowly evolving or rapidly progressive course. Case presentation The case of a 39-years-old Caucasian woman with a three-year history of recurrent bilateral chondritis of the auricles, nasal chondritis, seronegative polyarthritis and dermatitis is reported. She had an associated bilateral stapedial fixation and one side was successfully operated on. She also had a large septal perforation involving both the cartilaginous and bony parts. The patient first presented with severe cutaneous inflammation when she was only one month old, and so this is an illustrative case of relapsing polychondritis that slowly evolved over many years. Conclusions Relapsing polychondritis is still a relatively uncommon condition, which explains why there is often a delayed diagnosis of the disease. It is usually difficult to examine tympanic membranes in cases of relapsing polychondritis, and, therefore stapes fixation should also be suspected when there is an associated conductive hearing loss.

Comparison of preoperative computerized tomography scan imaging of temporal bone with the intra-operative findings in patients undergoing mastiodectomy

International Nuclear Information System (INIS)

Gerami, H.; Naghavi, E.; Wahabi-Moghadam, M.; Forghanparast, K.; Akbar, Manzar H.

2009-01-01

Objective was to compare the consistency rates of pre- and intra-operative radiological findings in patients with chronic suppurative otitis media (CSOM). In a cross-sectional study, 80 patients with CSOM underwent pre-operative CT scanning and we compared the results with intra-operative clinical findings during mastiodectomy from 2000-2004 in the Otology Department, Amiralmomenin Hospital of Guilan Medical University, Rasht, Iran. Sensitivity, specificity, positive and negative predictive value of CT scan in tympanic and mastoid cholesteatoma, ossicular chain erosion, tegmentympani erosion, dehiscence of facial canal, lateral semicircular canal (LSCC) fistula were assessed. Then, correlation between radiological findings and intra-operative findings were calculated. The mean age of patients was 27.9+-16.3 years. Mostly were males (n=57 [71.3%]). Correlation of preoperative radiological images with intra-operative clinical findings were moderate to good on tympanic cholesteatoma, mastoid cholesteatoma and ossicular chain erosion, but weak and insignificant in cases of tegmen erosion, facial canal dehiscene and LSCC fistulae. Preoperative CT scan may be helpful in decision-making for surgery in cases of cholesteatoma and ossicular erosion. Despite of limitations radiological scanning is a useful adjunct to management of CSOM. (author)

Ear Structures of the Naked Mole-Rat, Heterocephalus glaber, and Its Relatives (Rodentia: Bathyergidae.

Directory of Open Access Journals (Sweden)

Matthew J Mason

Full Text Available Although increasingly popular as a laboratory species, very little is known about the peripheral auditory system of the naked mole-rat, Heterocephalus glaber. In this study, middle and inner ears of naked mole-rats of a range of ages were examined using micro-computed tomography and dissection. The ears of five other bathyergid species (Bathyergus suillus, Cryptomys hottentotus, Fukomys micklemi, Georychus capensis and Heliophobius argenteocinereus were examined for comparative purposes. The middle ears of bathyergids show features commonly found in other members of the Ctenohystrica rodent clade, including a fused malleus and incus, a synovial stapedio-vestibular articulation and the loss of the stapedius muscle. Heterocephalus deviates morphologically from the other bathyergids examined in that it has a more complex mastoid cavity structure, poorly-ossified processes of the malleus and incus, a 'columelliform' stapes and fewer cochlear turns. Bathyergids have semicircular canals with unusually wide diameters relative to their radii of curvature. How the lateral semicircular canal reaches the vestibule differs between species. Heterocephalus has much more limited high-frequency hearing than would be predicted from its small ear structures. The spongy bone forming its ossicular processes, the weak incudo-stapedial articulation, the columelliform stapes and (compared to other bathyergids reduced cochlear coiling are all potentially degenerate features which might reflect a lack of selective pressure on its peripheral auditory system. Substantial intraspecific differences were found in certain middle and inner ear structures, which might also result from relaxed selective pressures. However, such interpretations must be treated with caution in the absence of experimental evidence.

Ear Structures of the Naked Mole-Rat, Heterocephalus glaber, and Its Relatives (Rodentia: Bathyergidae).

Science.gov (United States)

Mason, Matthew J; Cornwall, Hannah L; Smith, Ewan St J

2016-01-01

Although increasingly popular as a laboratory species, very little is known about the peripheral auditory system of the naked mole-rat, Heterocephalus glaber. In this study, middle and inner ears of naked mole-rats of a range of ages were examined using micro-computed tomography and dissection. The ears of five other bathyergid species (Bathyergus suillus, Cryptomys hottentotus, Fukomys micklemi, Georychus capensis and Heliophobius argenteocinereus) were examined for comparative purposes. The middle ears of bathyergids show features commonly found in other members of the Ctenohystrica rodent clade, including a fused malleus and incus, a synovial stapedio-vestibular articulation and the loss of the stapedius muscle. Heterocephalus deviates morphologically from the other bathyergids examined in that it has a more complex mastoid cavity structure, poorly-ossified processes of the malleus and incus, a 'columelliform' stapes and fewer cochlear turns. Bathyergids have semicircular canals with unusually wide diameters relative to their radii of curvature. How the lateral semicircular canal reaches the vestibule differs between species. Heterocephalus has much more limited high-frequency hearing than would be predicted from its small ear structures. The spongy bone forming its ossicular processes, the weak incudo-stapedial articulation, the columelliform stapes and (compared to other bathyergids) reduced cochlear coiling are all potentially degenerate features which might reflect a lack of selective pressure on its peripheral auditory system. Substantial intraspecific differences were found in certain middle and inner ear structures, which might also result from relaxed selective pressures. However, such interpretations must be treated with caution in the absence of experimental evidence.

Novel syndrome with conductive hearing loss and congenital glaucoma in three generations.

Science.gov (United States)

Takeuchi, Kazuhiko; Kitano, Masako; Sakaida, Hiroshi; Masuda, Sawako

2017-08-01

The objective of this paper was to describe the clinical and otological findings in multiple members of a family with congenital glaucoma, cardiac anomaly, and conductive hearing loss due to ossicular chain anomalies. We performed a retrospective review of the medical charts and otological materials of multiple members of the same family. Congenital glaucoma and hearing loss were inherited by the proband and her daughter, son, and mother, suggesting autosomal dominant inheritance. The son and daughter also showed atrial septal defects. Exploratory tympanotomies revealed anomalies of the long process of the incus in the proband and her daughter, and tympanoplasty improved hearing loss in both patients. This represents the first description of coexisting congenital glaucoma and conductive hearing loss due to ossicular chain anomalies in multiple members of a single family. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Ossiculoplasty: A Prospective Study of 80 Cases

Directory of Open Access Journals (Sweden)

Shrinivas Shripatrao Chavan

2014-07-01

Full Text Available Introduction: The use of ossicular graft material in ossicular chain reconstruction has significantly improved hearing results hearing after tympanoplasty and tympanomastoid surgery for chronic otitis media. Today, otologists have a wide array of tools from which to choose, but may find it difficult to know which middle ear implant works best.   Materials and Methods: A prospective study of 80 patients who underwent ossiculoplasty was performed in the ear, nose, and throat (ENT department at a tertiary health care facility from 2011 to 2013. Patients with chronic suppurative otitis media with an air-bone gap (ABG of >25 dB with ossicular involvement were included in the study. Total ossicular replacement prosthesis (TORP, partial ossicular replacement prosthesis (PORP, and refashioned incus were used. Success was defined as ABG   Results: The majority patients were of middle age with moderate conductive hearing loss. Incus was the most susceptible ossicle. Overall success rate in this study was 80.0% with an average change of 15.76 dB in ABG.   Conclusion:  With continuing advances in our understanding of middle ear mechanics, the results of ossiculoplasty are improving and results can be very rewarding in experienced hands. Severity of preoperative ear discharge, preoperative mastoid cellularity, presence of disease, and surgical procedure proved to be significant prognostic factors. Autograft incus and PORP fared better when the malleus handle was present while TORP gave better results when the malleus handle was eroded.  

Tympanic plate fractures in temporal bone trauma: prevalence and associated injuries.

Science.gov (United States)

Wood, C P; Hunt, C H; Bergen, D C; Carlson, M L; Diehn, F E; Schwartz, K M; McKenzie, G A; Morreale, R F; Lane, J I

2014-01-01

The prevalence of tympanic plate fractures, which are associated with an increased risk of external auditory canal stenosis following temporal bone trauma, is unknown. A review of posttraumatic high-resolution CT temporal bone examinations was performed to determine the prevalence of tympanic plate fractures and to identify any associated temporal bone injuries. A retrospective review was performed to evaluate patients with head trauma who underwent emergent high-resolution CT examinations of the temporal bone from July 2006 to March 2012. Fractures were identified and assessed for orientation; involvement of the tympanic plate, scutum, bony labyrinth, facial nerve canal, and temporomandibular joint; and ossicular chain disruption. Thirty-nine patients (41.3 ± 17.2 years of age) had a total of 46 temporal bone fractures (7 bilateral). Tympanic plate fractures were identified in 27 (58.7%) of these 46 fractures. Ossicular disruption occurred in 17 (37.0%). Fractures involving the scutum occurred in 25 (54.4%). None of the 46 fractured temporal bones had a mandibular condyle dislocation or fracture. Of the 27 cases of tympanic plate fractures, 14 (51.8%) had ossicular disruption (P = .016) and 18 (66.6%) had a fracture of the scutum (P = .044). Temporomandibular joint gas was seen in 15 (33%) but was not statistically associated with tympanic plate fracture (P = .21). Tympanic plate fractures are commonly seen on high-resolution CT performed for evaluation of temporal bone trauma. It is important to recognize these fractures to avoid the preventable complication of external auditory canal stenosis and the potential for conductive hearing loss due to a fracture involving the scutum or ossicular chain.

Congenital malformations of the external and middle ear: high-resolution CT findings of surgical import

International Nuclear Information System (INIS)

Swartz, J.D.; Faerber, E.N.

1985-01-01

The external auditory canal, middle ear, and bulk of the ossicular chain develop from the first branchial groove, first and second branchial arches, and first pharyngeal pouch. Embryologic development of these structures is complex and only rarely are two anomalies identical. This study includes 11 cases of unilateral external auditory canal atresia and two cases of bilateral atresia. Eight cases (four bilateral) of isolated congenital ossicular anomalies are also included. Emphasis is placed on findings of surgical import. All patients were studied with computed tomography only, because it was believed that the bony and soft-tissue detail achieved is superior to that with conventional multidirectional tomography

The demonstration of the auditory ossicles by high resolution CT

International Nuclear Information System (INIS)

Lloyd, G.A.S.; Boulay, G.H. du; Phelps, P.D.; Pullicino, P.

1979-01-01

The high resolution CT scanning system introduced by EMI in 1978 has added a new dimension to computerised tomography in otology. The apparatus used for this study was an EMI CT 5005 body scanner adapted for head and neck scanning and incorporating a high resolution facility. The latter has proved most advantageous in areas of relatively high differential absorption, so that its application to the demonstration of abnormalities in the petrous temporal bone, and in particular middle ear disease, has been very rewarding. Traumatic ossicular disruptions may now be demonstrated and the high contrast of CT often shows them better than conventional hypocycloidal tomography. The stapes is also better visualised and congenital abnormalities of its superstructure have been recorded. These studies have been achieved with a very acceptable level of radiation to the eye, lens and cornea and the technique is clearly a rival to conventional pluridirectional tomography in the assessment of the petrous temporal bone. With further design improvements high resolution CT could completely replace existing techniques. (orig.) [de

The use of total ossicular replacement prosthesis after radical tympanomastoidectomy

Directory of Open Access Journals (Sweden)

Rančić Dejan

2013-01-01

Full Text Available Background/Aim. This paper presents our operative method for hearing recovery after the previous radical tympanomastoidectomy, radical trepanation of the temporal bone (trepanatio radicalis ossis temporalis - TROT in eight patients submitted to operations for giant cholesteatotoma. Methods. All the patients were admitted to our clinic after TROT. There were no signs of cholesteatoma or infection. The patients refused any stent implantations or any hearing aids due to possible aesthetic problems. The described procedure developed in two steps. The first one was to restore the destroyed cavum tympany and to covert with chondroperichondral new membrane with a pin-like “guide” as collumela. The second step was to insert a TORP (total ossicular replacement prosthesis after guide excision. Results. After the first operation (stage one there were no infections in the operated area nor chondroperichondral graft rejection. Postoperative audiometry (6 to 8 weeks was done to demonstrate the improvement of air conduction. Three months following the first, the second (stage two operation was performed and 2.5 to 3 months after this operation even greater audiometry revealed hearing improvement in air- and bone-conduction. The patients were dismissed from the hospital 2 days after each procedure without any complications. They did not experience any dizziness, vomiting nor a severe pain. Three months after the second operative stage, otoscopic findings were very good. The audiometry findings after a 3-months period (after stage one and 3 months after final TORP insertion was done for each of the patients. After one year, the audiometric curve was the same. Clinical and audiometry follow up demonstrated a hearing recovery and closure of air bone gap (ABG to values of 5 to 15 dB. Conclusion. The use of TORP after radical tympanomastoidectomy is feasible. The first step of the procedure is the fixation of a neomembrane. A stabilized neomembrane is essential

Audiological and surgical evidence for the presence of a third window effect for the conductive hearing loss in DFNX2 deafness irrespective of types of mutations.

Science.gov (United States)

Choi, Byung Yoon; An, Yong-Hwi; Park, Joo Hyun; Jang, Jeong Hun; Chung, Hyun Chung; Kim, Ah-Reum; Lee, Jun Ho; Kim, Chong-Sun; Oh, Seung Ha; Chang, Sun O

2013-11-01

The objective of this study was to clarify the cause of the air-bone gap in incomplete partition (IP) type III cases according to the POU3F4 gene (DFNX2) mutation type. A retrospective analysis of patient medical records was done in a tertiary referral medical center. Five IP type III patients proved to be carrying a mutation in or affecting POU3F4. The hearing and the middle ear status at either exploratory tympanotomy or cochlear implantation from these DFNX2 cases was reviewed. Four of five unrelated IP type III patients harbored a point mutation of POU3F4 and the fifth patient carried a large genomic deletion upstream to POU3F4. Two of the four DFNX2 patients carrying a point mutation had moderate to severe mixed hearing loss with a substantial amount of air-bone gap. These patients underwent exploratory tympanotomy to identify the cause of their hearing loss. The other three patients, including one carrying a large deletion, had profound hearing loss at presentation and received a cochlear implant. In the exploratory tympanotomy group with a substantial amount of air-bone gap and a point mutation (n = 2), one patient had a perfect ossicular chain with normal mobility, a positive ipsilateral stapedial reflex, and a positive round window reflex. In the cochlear implantation group (n = 3), we found a stapes with normal mobility and a positive round window reflex in one patient who harbored a large genomic deletion upstream to POU3F4. We concluded that the probable presence of the third window effect is not limited to the particular type of POU3F4 mutation.

Determinants of Change in Air-Bone Gap and Bone Conduction in Patients Operated on for Chronic Otitis Media.

Science.gov (United States)

Wiatr, Maciej; Wiatr, Agnieszka; Składzień, Jacek; Stręk, Paweł

2015-08-11

Middle ear surgery aims to eliminate pathology from the middle ear, improve drainage and ventilation of the postoperative cavity, and reconstruct the tympanic membrane and ossicles. The aim of this work is to define the factors that affect ABG (air-bone gap) and bone conduction in the patients operated on due to chronic otitis media. A prospective analysis of patients operated on due to diseases of the middle ear during 2009-2012 was carried out. The cases of patients operated on for the first time due to chronic otitis media were analyzed. The analysis encompassed patients who had undergone middle ear surgery. The patients were divided into several groups taking into account the abnormalities of the middle ear mucous and damage of the ossicular chain observed during otosurgery. A significant hearing improvement was observed in patients with type 2 tympanoplasty in the course of chronic cholesteatoma otitis media and in patients with simple chronic inflammatory process in whom a PORP was used in the reconstruction. Granulation tissue was an unfavorable factor of hearing improvement following tympanoplasty. A significant improvement of bone conduction was observed in the patients with dry perforation without other lesions in the middle ear. The elimination of granulation lesions was a positive factor for the future improvement of the function of the inner ear. The presence of granuloma-related lesions in the middle ear spaces is likely to impede hearing improvement. Damage to the ossicular chain rules out the possibility of bone conduction improvement after surgery. The prognosis on tube-related simple chronic otitis media after myringoplasty, with the preserved continuity of the ossicular chain, consists of closing the ABG and leads to significant improvement of bone conduction.

Ranking of CT in persistent vertigo after implantation of stapes prostheses; Stellenwert der Computertomographie bei persistierenden Gleichgewichtsstoerungen nach dem Einsatz von Stapesplastiken

Energy Technology Data Exchange (ETDEWEB)

Koesling, S. [Leipzig Univ. (Germany). Klinik fuer Diagnostische Radiologie; Woldag, K. [Leipzig Univ. (Germany). Klinik und Poliklinik fuer Hals-Nasen-Ohren-Krankheiten; Meister, E.F. [Leipzig Univ. (Germany). Klinik und Poliklinik fuer Hals-Nasen-Ohren-Krankheiten; Reschke, I. [Leipzig Univ. (Germany). Klinik fuer Diagnostische Radiologie; Schulz, H.G. [Leipzig Univ. (Germany). Klinik fuer Diagnostische Radiologie

1995-01-01

10 of 150 patients had persistent vertigo after implanation of stapes prostheses. These patients were evaluated by high resolution CT in the axial and coronal plane. Scans showed in all cases findings which related to the symptoms. The CT findings were proved intraoperatively in 9 cases. A new indirect sign of a perilymphatic fistula is described in form of an air bulla at the end of the prosthesis. Retympanotomy could be planned better with the help of HR-CT. (orig.) [Deutsch] Von 150 Patienten zeigten 10 nach dem Einsatz einer Stapesprothese eine persistierende vestibulaere Symptomatik. Mittels der hochaufloesenden Felsenbein-CT in axialer und koronarer Schnittfuehrung konnten in allen Faellen in Symptomatik erklaerende Befunde erhoben werden. Eine operative Bestaetigung erfolgte in 9 Faellen. Als bisher in der Literatur in diesem Zusammenhang nicht beschriebenes, indirektes Zeichen einer Perilymphfistel wurde eine kleine Luftblase am Prothesenende nachgewiesen. Die HR-CT hat sich als wesentliche Erleichterung bei der Planung einer Retympanotomie erwiesen. (orig.)

Theoretical and computacional analysis of the fixing of ossicular chain

Directory of Open Access Journals (Sweden)

E. Alvarado Anell

2008-01-01

Full Text Available Presentamos un modelo matemático para describir la dinámica de la membrana timpánica ante una fijación de la cadena osicular. El modelo se ha derivado de la ecuación de onda libre, considerando primero semi-membranas, las cuales resultan de líneas nodales del centro al eje de la membrana. Posteriermente se considera el caso donde sólo hay una línea nodal, la cual modela la región donde está conectado el martillo a la membrana. Se ha usado MAPLE para realizar las simulaciones del modelo, se han observado las vibraciones de la membrana timpánica con la cadena osicular fija. Se muestra que la región donde el martillo se conecta a la membrana permanece fija.

Anatomical study of the pigs temporal bone by microdissection.

Science.gov (United States)

Garcia, Leandro de Borborema; Andrade, José Santos Cruz de; Testa, José Ricardo Gurgel

2014-01-01

Initial study of the pig`s temporal bone anatomy in order to enable a new experimental model in ear surgery. Dissection of five temporal bones of Sus scrofa pigs obtained from UNIFESP - Surgical Skills Laboratory, removed with hole saw to avoid any injury and stored in formaldehyde 10% for better conservation. The microdissection in all five temporal bone had the following steps: inspection of the outer part, external canal and tympanic membrane microscopy, mastoidectomy, removal of external ear canal and tympanic membrane, inspection of ossicular chain and middle ear. Anatomically it is located at the same position than in humans. Some landmarks usually found in humans are missing. The tympanic membrane of the pig showed to be very similar to the human, separating the external and the middle ear. The middle ear`s appearance is very similar than in humans. The ossicular chain is almost exactly the same, as well as the facial nerve, showing the same relationship with the lateral semicircular canal. The temporal bone of the pigs can be used as an alternative for training in ear surgery, especially due the facility to find it and its similarity with temporal bone of the humans.

[Analyses of the clinical characteristics of unilateral conductive hearing loss with intact tympanic membrane].

Science.gov (United States)

Tang, Chaoying; Zhang, Jishuai; Han, Weiju; Shen, Weidong; Liu, Jun; Hou, Zhaohui; Dai, Pu; Yang, Shiming; Han, Dongyi

2016-05-01

To analyze the clinical characteristics of unilateral conductive hearing loss with intact tympanic membrane, and summarize the key diagnostic points, differential diagnosis and observe the effects of surgical treatment. We reviewed data from 82 patients with unilateral conductive hearing loss with intact tympanic membranes who accepted the exploratory tympanotomy from April 2011 to September 2013. There were 41 males and 41 females, aged from 7 to 66( averaged 26.5±13.7)years, with a history of one month to 50 years. The history, clinical symptoms, audiological evaluation, high resolution temporal bone CT, the results of surgical exploration and hearing reconstruction were analyzed. The exploratory tympanotomy revealed 43 cases of congenital middle ear malformations (52.4%), 22 cases of otosclerosis (26.8%), eight cases of congenital cholesteatoma (9.8%), six cases of trauma induced conductive hearing loss (7.3%), three cases of congenital ossicular malformations with congenital cholesteatoma (3.7%). Progressive hearing loss was common in patients with otosclerosis and congenital cholesteatoma, and patients with congenital middle ear malformations described their hearing loss since childhood. High resolution temporal bone CT of congenital middle ear malformation, trauma induced conductive hearing loss, congenital cholesteatoma diagnosis rate was 40.0%, 50.0%, and 83.3% respectively. The preoperative air-conductive threshold of patients with absence of the oval window were increased to (66.9±1.1)dBHL, the preoperative bone-conductive threshold achieved (28.3±10.4)dBHL at 2 000 Hz. While patients with stapes fixation and that with ossicular chain discontinuity were (27.2±9.7)dBHL and (17.8±8.8)dBHL(P=0.000)respectively. Through the tympanic exploration with endaural incision under the microscope, different hearing reconstruction were applied according to different lesions. After the operation, the hearing level of 52 patients with return visit were improved, the

Evolution of the auditory ossicles in extant hominids: metric variation in African apes and humans

Science.gov (United States)

Quam, Rolf M; Coleman, Mark N; Martínez, Ignacio

2014-01-01

of sexual dimorphism were found in the ossicles within each taxon, but some relationship with body size and several dimensions of the ear bones was found. Several of the metric distinctions in the incus and stapes imply a slightly different articulation of the ossicular chain within the tympanic cavity in African apes compared with humans. The limited auditory implications of these metric differences in the ossicles are also discussed. Finally, the results of this study suggest that several plesiomorphic features for apes may be retained in the ear bones of the early hominin taxa Australopithecus and Paranthropus as well as in the Neandertals. PMID:24845949

Medline Plus

Full Text Available ... incus and stapes. As the stapes moves, it pushes a structure called the oval window in and ... brain by sensory nerves. As the stapes rocks back and forth against the oval window, it transmits ...

Technical note: a landmark-based approach to the study of the ear ossicles using ultra-high-resolution X-ray computed tomography data.

Science.gov (United States)

Schmidt, Jodi L; Cole, Theodore M; Silcox, Mary T

2011-08-01

Previous study of the ear ossicles in Primates has demonstrated that they vary on both functional and phylogenetic bases. Such studies have generally employed two-dimensional linear measurements rather than three-dimensional data. The availability of Ultra- high-resolution X-ray computed tomography (UhrCT) has made it possible to accurately image the ossicles so that broadly accepted methodologies for acquiring and studying morphometric data can be applied. Using UhrCT data also allows for the ossicular chain to be studied in anatomical position, so that it is possible to consider the spatial and size relationships of all three bones. One issue impeding the morphometric study of the ear ossicles is a lack of broadly recognized landmarks. Distinguishing landmarks on the ossicles is difficult in part because there are only two areas of articulation in the ossicular chain, one of which (the malleus/incus articulation) has a complex three-dimensional form. A measurement error study is presented demonstrating that a suite of 16 landmarks can be precisely located on reconstructions of the ossicles from UhrCT data. Estimates of measurement error showed that most landmarks were highly replicable, with an average CV for associated interlandmark distances of less than 3%. The positions of these landmarks are chosen to reflect not only the overall shape of the bones in the chain and their relative positions, but also functional parameters. This study should provide a basis for further examination of the smallest bones in the body in three dimensions. Copyright © 2011 Wiley-Liss, Inc.

CT of petrou bone. Utility to cholesteatoma location. Study of 28 cases

International Nuclear Information System (INIS)

Ferrer, M.D.; Espinos, M.A.; Molina, A.; Martinez-Rodrigo, J.; Galant, J.

1993-01-01

Twenty-eight patients with cholesteatoma were studied preoperatively by means of CT petrous bone to determine the localization and extension of their lesion. All the patients underwent survey and the intraoperative findings were compared with those resulting from CT. The reading was carried out with no knowledge of the intraoperative data. The following results were obtained: localization of cholesteatoma in attic, antrum and posterior tympanic cavity had a sensitivity of 0.91 and a specificity of 0.57, with a Fisher's p value less than 0.0005. When the erosion produced by the cholesteatoma was studied in the different structures, the accuracy was greatest with the stape, the septum and prussak's space; the highest number of false negatives corresponded to the tympanic membrane. The false positives were produced in the assessment of the facial canal, tegmen tympani and the labyrinthine fistula. The reliability of CT was very high for the diagnosis of ossicular destruction and displacement of the small bones, as well as for the state of the mastoid cells and congenital variations. In conclusion, we point out the importance of performing a CT study prior to surgery for cholesteatoma due to its elevated sensitivity in locating the lesion, and we stress the value of the knowledge of the erosion of the different structures since it constitutes a guide for intraoperative exploration and assessment. (Author)

High resolution CT of temporal bone trauma

International Nuclear Information System (INIS)

Youn, Eun Kyung

1986-01-01

Radiographic studies of the temporal bone following head trauma are indicated when there is cerebrospinal fluid otorrhea or rhinorrhoea, hearing loss, or facial nerve paralysis. Plain radiography displays only 17-30% of temporal bone fractures and pluridirectional tomography is both difficult to perform, particularly in the acutely ill patient, and less satisfactory for the demonstration of fine fractures. Consequently, high resolution CT is the imaging method of choice for the investigation of suspected temporal bone trauma and allows special resolution of fine bony detail comparable to that attainable by conventional tomography. Eight cases of temporal bone trauma examined at Korea General Hospital April 1985 through May 1986. The results were as follows: Seven patients (87%) suffered longitudinal fractures. In 6 patients who had purely conductive hearing loss, CT revealed various ossicular chain abnormality. In one patient who had neuro sensory hearing loss, CT demonstrated intract ossicular with a fracture nearing lateral wall of the lateral semicircular canal. In one patient who had mixed hearing loss, CT showed complex fracture.

Cirurgia do estapédio na residência: experiência do Hospital de Clínicas/UFPR Stapes surgery in residency: the ufpr clinical hospital experience

Directory of Open Access Journals (Sweden)

Adriano Ulisses Caldart

2007-10-01

Full Text Available A cirurgia do estapédio permanece como tratamento consagrado para a otosclerose. Recentes publicações têm demonstrado que o sucesso cirúrgico nas cirurgias realizadas por médicos residentes tem diminuído e que os resultados audiológicos tem sido piores que os obtidos por cirurgiões experientes. OBJETIVOS: Avaliar a experiência do serviço de otorrinolaringologia do Hospital de Clínicas/UFPR na realização de cirurgias do estapédio no programa de residência médica. MATERIAL E MÉTODO: Estudo retrospectivo de 114 cirurgias do estapédio realizadas nos últimos 9 anos, em 96 pacientes. Os resultados audiométricos foram analisados conforme orientação do Committee on Hearing and Equilibrium e através do Amsterdam Hearing Evaluation Plots, considerando a melhora do gap pós-operatório e de limiares da via aérea. RESULTADOS: Foram incluídos 96 pacientes, na maioria adultos, do sexo feminino (67,7% e caucasianos (93,7%. Em 50,9% dos casos foi realizada estapedectomia, sendo a grande maioria sob anestesia local e sedação (96,5% e utilizando principalmente a prótese de Teflon (37,7%. A taxa de sucesso cirúrgico foi de 50,88%, com 11,4% de complicações. CONCLUSÃO: Os ganhos de audição pós-operatórios considerados como sucesso cirúrgico foram inferiores aos publicados na literatura por cirurgiões experientes.Surgery of the stapedius remains the established treatment for otosclerosis. Recent publications have showed that success in surgeries done by residents have decreased and hearing results are worse than those obtained by experienced otologic surgeons. AIM: To evaluate the experience of the otorhinolaryngology unit, Parana University, relative to stapes surgery done in the residency training program. MATERIAL AND METHOD: A retrospective study of 114 stapes surgeries done in the past 9 years in 96 patients. Audiometric results were analysed according to the Commitee on Hearing and Equilibrium guidelines and the Amsterdam

The influence of prosthesis diameter in stapes surgery: a meta-analysis and systematic review of the literature.

Science.gov (United States)

Laske, Roman D; Röösli, Christof; Chatzimichalis, Michail Vasileios; Sim, Jae Hoon; Huber, Alexander M

2011-06-01

To analyze the influence of stapes prosthesis diameter on postoperative hearing results after stapedotomy without interposition in otosclerotic patients. PubMed search from 1970 to 2009 using the key words stapedotomy or stapedectomy or otosclerosis or stapesplasty. Inclusion criteria to select articles and patient groups for meta-analysis and statistical analyses were as follows: otosclerosis as diagnosis, clear description of technique and prosthesis size, calibrated stapedotomy, and complete report of functional results. Five controlled studies were found analyzing the influence of prosthesis diameter and reporting the results in a comparable way for meta-analysis (n = 590). Sixty-two studies not analyzing the influence of prosthesis diameter contained comparable subgroups with a total of 9,536 cases. These cases were pooled according to their diameter (0.3, 0.4, 0.5, 0.6,and 0.8 mm). The results of air conduction, bone conduction, air-bone gap (ABG), and success rate (closure of the ABG within 10 dB as percentage of the total cases) for all groups and frequency-specific ABG results were gathered. Furthermore, 12 clinical and experimental studies were reviewed that did not contribute to the statistical analysis. A meta-analysis performed for success rate of the 5 controlled studies showed favorable results for 0.6-mm over 0.4-mm prostheses (success rate, 67% versus 58%, p = 0.05). In the statistical analysis of the pooled data, the 0.6-mm prosthesis showed better results compared with 0.4 mm (p prosthesis in the high frequencies. There was no difference in postoperative change of bone conduction in the 0.6- and 0.4-mm groups. Statistically significant results could not be assessed for other prosthesis diameters because of the small number of cases reported. A 0.6-mm diameter piston prosthesis is associated with significantly better results than a 0.4-mm prosthesis and should be used if the surgical conditions allow it.

Measurement of conductive hearing loss in mice.

Science.gov (United States)

Qin, Zhaobing; Wood, Melissa; Rosowski, John J

2010-05-01

In order to discriminate conductive hearing loss from sensorineural impairment, quantitative measurements were used to evaluate the effect of artificial conductive pathology on distortion-product otoacoustic emissions (DPOAEs), auditory brainstem responses (ABRs) and laser-Doppler vibrometry (LDV) in mice. The conductive manipulations were created by perforating the pars flaccida of the tympanic membrane, filling or partially filling the middle-ear cavity with saline, fixing the ossicular chain, and interrupting the incudo-stapedial joint. In the saline-filled and ossicular-fixation groups, averaged DPOAE thresholds increased relative to the control state by 20-36 and 25-39 dB, respectively with the largest threshold shifts occurring at frequencies less than 20kHz, while averaged ABR thresholds increased 12-19 and 12-25 dB, respectively without the predominant low-frequency effect. Both DPOAE and ABR thresholds were elevated by less than 10 dB in the half-filled saline condition; no significant change was observed after pars flaccida perforation. Conductive pathology generally produced a change in DPOAE threshold in dB that was 1.5-2.5 times larger than the ABR threshold change at frequencies less than 30 kHz; the changes in the two thresholds were nearly equal at the highest frequencies. While mild conductive pathology (ABR threshold shifts of conductive hearing losses (ABR threshold shifts >10 dB) were associated with significant deceases in DPOAE growth rate. Our LDV measurements are consistent with others and suggest that measurements of umbo velocity are not an accurate indicator of conductive hearing loss produced by ossicular lesions in mice. Copyright (c) 2009 Elsevier B.V. All rights reserved.

CHAINS-PC, Decay Chain Atomic Densities

International Nuclear Information System (INIS)

1994-01-01

1 - Description of program or function: CHAINS computes the atom density of members of a single radioactive decay chain. The linearity of the Bateman equations allows tracing of interconnecting chains by manually accumulating results from separate calculations of single chains. Re-entrant loops can be treated as extensions of a single chain. Losses from the chain are also tallied. 2 - Method of solution: The Bateman equations are solved analytically using double-precision arithmetic. Poles are avoided by small alterations of the loss terms. Multigroup fluxes, cross sections, and self-shielding factors entered as input are used to compute the effective specific reaction rates. The atom densities are computed at any specified times. 3 - Restrictions on the complexity of the problem: Maxima of 100 energy groups, 100 time values, 50 members in a chain

Outcomes for conservative management of traumatic conductive hearing loss.

Science.gov (United States)

Grant, Jonathan R; Arganbright, Jill; Friedland, David R

2008-04-01

To evaluate the natural history of traumatic conductive hearing loss. Retrospective chart review. Otologic and audiometric evaluations of patients in the early posttraumatic phase were compared with evaluations at follow-up. Assessment included etiologies of trauma, classification of hearing loss, factors causing conductive loss, and analyses of changes in air-bone gaps, pure-tone averages and hearing loss class. There were 45 patients, representing 47 ears, with sufficient initial and follow-up documentation to analyze the natural history of traumatic conductive hearing loss. Overall, 77% of ears showed an improvement in pure-tone averages without surgical intervention. Air-bone gaps closed from an average of 24.8 +/- 12.1 to 13.2 +/- 11.1 dB. Only 11% of ears demonstrated a decrease in pure-tone averages, and 12% showed no change in thresholds. All forms of injury contributing to the conductive hearing loss had good outcomes. Specifically, tympanic membrane perforations showed final air-bone gaps of 14.9 +/- 11.2 dB; cases of hemotympanum had final air-bone gaps of 10.0 +/- 8.1 dB; and suspected ossicular chain disruptions had final air-bone gaps of 13.9 +/- 12.3 dB. Only 5 of 47 ears ultimately required surgical intervention for persistent pathology. Patients with all forms of traumatic conductive hearing loss can be initially managed conservatively. Even suspected ossicular chain disruptions have a high rate of spontaneous reparation. Surgical intervention for perforation or conductive hearing loss should be undertaken in the rare cases when these conditions persist greater than 6 months.

Imaging of Conductive Hearing Loss With a Normal Tympanic Membrane.

Science.gov (United States)

Curtin, Hugh D

2016-01-01

This article presents an approach to imaging conductive hearing loss in patients with normal tympanic membranes and discusses entities that should be checked as the radiologist evaluates this potentially complicated issue. Conductive hearing loss in a patient with a normal tympanic membrane is a complicated condition that requires a careful imaging approach. Imaging should focus on otosclerosis, and possible mimics and potential surgical considerations should be evaluated. The radiologist should examine the ossicular chain and the round window and keep in mind that a defect in the superior semicircular canal can disturb the hydraulic integrity of the labyrinth.

Medline Plus

Full Text Available ... stapes. As the stapes moves, it pushes a structure called the oval window in and out. This ... cochlea, which is a fluid-filled snail-like structure that contains the receptor organ for hearing. The ...

Creative industries value chain: The value chain logic in supply chain relationships

OpenAIRE

Emilia Madudová

2017-01-01

The purpose of this paper is to provide a deeper look into value chain logic in supply chain relationships in a creative industries value chains. In recent years, value has been recognized as a key factor in better understanding of consumer behavior and gaining a competitive advantage. In a value chain, added value should be defined at every step of the chain. There should be defined activity which adds value as well as the activity that subtracts any value. The total value can be then calcul...

Standard handbook of chains chains for power transmission and material handling

CERN Document Server

2005-01-01

A BRIEF HISTORY OF THE DEVELOPMENT OF CHAINEarly DevelopmentsCog ChainCast Detachable ChainCast Pintle ChainPrecision Roller ChainEngineering Steel ChainSilent ChainFlat-Top ChainTerminologyA CHAIN OVERVIEW: USES AND ADVANTAGESGeneralTypes of ChainScope of Chains CoveredStyles and Forms of ChainsStraight and Offset Link ChainsChains With and Without RollersUses of ChainStandard Chains and Their UsesThe Advantages of Chains in ApplicationsAdvantages of Roller Chains in DrivesAdvantages of Silent Chain Drives

Development Value Chains meet Business Supply Chains : The concept of Global Value Chains unraveled

NARCIS (Netherlands)

S. Drost (Sarah); J.C.A.C. van Wijk (Jeroen); S.R. Vellema (Sietze)

2011-01-01

textabstractValue chain promotion is considered a key element of private sector development strategies and pro-poor growth. However, (value) chain concepts are rather complex and unclear. This paper unravels the concept of global value chains and studies the diversity of key value chain-related

MRI information for commonly used otologic implants: review and update.

Science.gov (United States)

Azadarmaki, Roya; Tubbs, Rhonda; Chen, Douglas A; Shellock, Frank G

2014-04-01

To review information on magnetic resonance imaging (MRI) issues for commonly used otologic implants. Manufacturing companies, National Library of Medicine's online database, and an additional online database (www.MRIsafety.com). A literature review of the National Library of Medicine's online database with focus on MRI issues for otologic implants was performed. The MRI information on implants provided by manufacturers was reviewed. Baha and Ponto Pro osseointegrated implants' abutment and fixture and the implanted magnet of the Sophono Alpha 1 and 2 abutment-free systems are approved for 3-Tesla magnetic resonance (MR) systems. The external processors of these devices are MR Unsafe. Of the implants tested, middle ear ossicular prostheses, including stapes prostheses, except for the 1987 McGee prosthesis, are MR Conditional for 1.5-Tesla (and many are approved for 3-Tesla) MR systems. Cochlear implants with removable magnets are approved for patients undergoing MRI at 1.5 Tesla after magnet removal. The MED-EL PULSAR, SONATA, CONCERT, and CONCERT PIN cochlear implants can be used in patients undergoing MRI at 1.5 Tesla with application of a protective bandage. The MED-EL COMBI 40+ can be used in 0.2-Tesla MR systems. Implants made from nonmagnetic and nonconducting materials are MR Safe. Knowledge of MRI guidelines for commonly used otologic implants is important. Guidelines on MRI issues approved by the US Food and Drug Administration are not always the same compared with other parts of the world. This monograph provides a current reference for physicians on MRI issues for commonly used otologic implants.

SUPPLY CHAIN STRATEGIES IN THE CONTEXT OF AN E-COMMERCE CHAIN (E-CHAIN

Directory of Open Access Journals (Sweden)

João Gilberto Mendes do Reis

2014-05-01

Full Text Available This paper purpose to explore the relationships between supply chain strategies and product performance in retail e-commerce. In this case, we concern that in current, in order to bear up under competition, organizations have to manage their supply chains so that they meet the needs of their final customers. With this concept in mind, the research presented in this study focuses on establishing the right strategy for supply chains according to their product segment. Thus, after a Literature Review, the paper explain a methodology based in different authors studies. Finally the article focuses on a pratical case in e-commerce retail that describes its application in this field. The research shows that it is possible to use a methodology for classifying supply chains using chain strategies and product features. The use of the right strategy for supply chains will improve the competitive advantage of businesses. One limitation is that the methodology study focuses on only two e-commerce segment; future studies may go further in refining the proposed framework for other segments. The aim of this research is to offer businesses a model for evaluating supply chains, allowing them to improve the performance of their products and services by using the right strategy for supply chains. The classification proposal of this paper presents an original model for classification of supply chains based on different studies on the theme.

Biosilicate® Ototoxicity and Vestibulotoxicity evaluation in guinea-pigs Avaliação da ototoxicidade e vestibulotoxicidade do biosilicato® em orelhas de cobaias

Directory of Open Access Journals (Sweden)

Eduardo Tanaka Massuda

2009-10-01

Full Text Available Changes, destructions and interruptions in middle ear ossicular chain architecture may be caused by infection, trauma, tumors, congenital alterations or prior surgeries. Nonetheless, infectious and inflammatory processes, focal or generalized which affect the middle ear are the most prevalent, causing a great demand for ossiculoplasty. Biosilicato® is a new material which can be used in the middle ear with the goal of reconstructing the ossicular chain. It is a bioactive type A vitroceramic, in other words, it binds to bone or soft tissue in a matter of a few hours, thanks to the formation of hydroxy-carbonateapatatie in its contact surface when in contact with body fluids. AIMS: The goal of the present paper is to assess biosilicate ototoxicity and vestibular toxicity in experimental animals, for later use in humans. MATERIALS AND METHODS: This a clinical and experimental study in which otoacoustic emissions were performed before and after the placement of Biosilicate in the middle ear of experimental animals and a scanning electron microscopy was carried out in the cochlea, saccule, utriculus and macula of the semicircular canals after 30 and 90 days to assess oto and vestibular toxicity. RESULTS: There were no signs of oto or vestibular toxicity in any of the groups associated with biosilicate. CONCLUSION: Biosilicate is a safe material to be used in ossiculoplastiesAs alterações, destruições e interrupções da arquitetura da cadeia ossicular da orelha média podem ser causadas por infecções, trauma, tumores, alterações congênitas ou cirurgias prévias. Entretanto os processos inflamatórios e infecciosos, focais ou generalizados que acometem a orelha média são os mais prevalentes, gerando uma enorme demanda de ossiculoplastias. O Biosilicato® é um novo material que pode ser usado em orelhas médias com o objetivo de reconstruir a cadeia ossicular. Constitui-se de uma vitrocerâmica bioativa do tipo A, ou seja, que se liga a

Decision-Making for Supply Chain Integration Supply Chain Integration

CERN Document Server

Lettice, Fiona; Durowoju, Olatunde

2012-01-01

Effective supply chain integration, and the tight co-ordination it creates, is an essential pre-requisite for successful supply chain management.  Decision-Making for Supply Chain Integration is a practical reference on recent research in the area of supply chain integration focusing on distributed decision-making problems. Recent applications of various decision-making tools for integrating supply chains are covered including chapters focusing on: •Supplier selection, pricing strategy and inventory decisions in multi-level supply chains, •RFID-enabled distributed decision-making, •Operational risk issues and time-critical decision-making for sensitive logistics nodes, Modelling end to end processes to improve supply chain integration, and •Integrated systems to improve service delivery and optimize resource use. Decision-Making for Supply Chain Integration provides an insight into the tools and methodologies of this field with support from real-life case studies demonstrating successful application ...

Port supply chain integration : analyzing biofuel supply chains

NARCIS (Netherlands)

Stevens, Leonie C. E.; Vis, Iris F. A.

2016-01-01

This paper focuses on port supply chain integration to strengthen operational and business performance. We provide a structured and comprehensive method to enable port supply chain integration and demonstrate its applicability to the biofuel supply chain. We define the value proposition, role,

Heavy Chain Diseases

Science.gov (United States)

... of heavy chain produced: Alpha Gamma Mu Alpha Heavy Chain Disease Alpha heavy chain disease (IgA heavy ... the disease or lead to a remission. Gamma Heavy Chain Disease Gamma heavy chain disease (IgG heavy ...

Supply Chain Connectivity: Enhancing Participation in the Global Supply Chain

OpenAIRE

Patalinghug, Epictetus E.

2015-01-01

Supply chain connectivity is vital for the efficient flow of trade among APEC economies. This paper reviews the literature and supply chain management, describes the barriers to enhancing participation in global supply chain, analyzes the various measures of supply chain performance, and suggests steps for the Philippines to fully reap the benefits of the global value chain.

Three dimensional volume rendering virtual endoscopy of the ossicles using a multi-row detector CT: applications and limitations

International Nuclear Information System (INIS)

Kim, Su Yeon; Choi, Sun Seob; Kang, Myung Jin; Shin, Tae Beom; Lee, Ki Nam; Kang, Myung Koo

2005-01-01

This study was conducted to know the applications and limitations of three dimensional volume rendering virtual endoscopy of the ossicles using a multi-row detector CT. This study examined 25 patients who underwent temporal bone CT using a 16-row detector CT as a result of hearing problems or trauma. The axial CT scan of the temporal bone was performed with a 0.6 mm collimation, and a reconstruction was carried out with a U70u sharp of kernel value, a 1 mm thickness and 0.5-1.0 mm increments. After observing the ossicles in the axial and coronal images, virtual endoscopy was performed using a three dimensional volume rendering technique with a threshold value of-500 HU. The intra-operative otoendoscopy was performed in 12 ears, and was compared with the virtual endoscopy findings. Virtual endoscopy of the 29 ears without hearing problems demonstrated hypoplastic or an incomplete depiction of the stapes superstructures in 25 ears and a normal depiction in 4 ears. Virtual endoscopy of 21 ears with hearing problems demonstrated no ossicles in 1 ears, no malleus in 3 ears, a malleoincudal subluxation in 6 ears, a dysplastic incus in 5 ears, an incudostapedial subluxation in 9 ears, dysplastic stapes in 2 ears, a hypoplastic or incomplete depiction of the stapes in 16 ears and no stapes in 1 ears. In contrast to the intra-operative otoendoscopy, 8 out of 12 ears showed a hypoplastic or deformed stapes in the virtual endoscopy. Volume rendering virtual endoscopy using a multi-row detector CT is an excellent method for evaluation the ossicles in three dimension, even thought the partial volume effect for the stapes superstructures needs to be considered

Comparison between Microscopic and Endoscopic Approaches for Evaluation of Anatomic Areas in Surgically Treated Chronic Otitis Media

Directory of Open Access Journals (Sweden)

M.T. Goodarzi

2013-07-01

Full Text Available Introduction & Objective: The diagnostic value of endoscopic and microscopic procedures for viewing different structures of middle ear has been widely assessed however, no published study is available for comparing the diagnostic value of them in chronic otitis media patients. The present study conducted to compare diagnostic value of these two procedures for as-sessment of middle ear normal structures and possible defects in these patients. Materials & Methods: In a prospective descriptive analytical study, fifty eight consecutive pa-tients older than 15 years who suffered from chronic otitis media and were candidates for tympanoplasty with or without mastoidectomy were included into the study and underwent operation. After entering the middle ear by post auricular incision and elevation of a tym-panomeatal flap, and prior to surgery , the middle ear was first examined by an operating mi-croscope in different bed and microscope positions and by performing gentle maneuvers on the head and then was reevaluated using a rigid 0 & 30 degree sinoscope. The visible areas of middle ear were separately noted. Results: Structures of epitympanum, posterior mesotympanum, and hypotympanum structures were more visible using endoscope compared with microscope(P0.05. Conclusion: Endoscopic and microscopic procedures had similar diagnostic values to view ossicular chain mobility and reflexes of round window as well as to detect ossicular chain erosions, but different anatomical parts and more hidden pits of the middle ear such as epitympanum, posterior mesotympanum, and hypotympanum are more visible by an endoscopic tool.In case of pathologic conditions, endoscopic approach is recommended for better observation and adequate evaluation of the location before and after the removal of the lesion. (Sci J Hamadan Univ Med Sci 2013; 20 (2:95-100

Falling chains

OpenAIRE

Wong, Chun Wa; Yasui, Kosuke

2005-01-01

The one-dimensional fall of a folded chain with one end suspended from a rigid support and a chain falling from a resting heap on a table is studied. Because their Lagrangians contain no explicit time dependence, the falling chains are conservative systems. Their equations of motion are shown to contain a term that enforces energy conservation when masses are transferred between subchains. We show that Cayley's 1857 energy nonconserving solution for a chain falling from a resting heap is inco...

Conductive hearing loss with an intact tympanic membrane due to non-inflammatory causes.

Science.gov (United States)

Choi, Jin Hyuk; Lee, Min Young; Park, Ji Hye; Lee, Kyu-Yup; Lee, Sang Heun; Jang, Jeong Hun

2016-04-01

We analyzed audiologic and surgical findings in patients with conductive hearing loss (CHL) with an intact tympanic membrane (TM) that was of a non-inflammatory origin. We reviewed data from patients who underwent exploratory tympanotomy for CHL with intact TM from January 1995 to November 2012. Patients with diseases of non-inflammatory origin were enrolled (69 patients; 79 ears). Patients were categorized into two groups: non-trauma (50 ears) and trauma (29 ears). Demographic data, intraoperative findings, and audiologic results were obtained and analyzed. Overall, the second decade was the most common age of diagnosis in both the non-trauma and trauma groups. Operative findings showed that ossicular dislocation was more prevalent than ossicular fixation; all trauma group subjects had ossicular dislocation. Short columellization or partial ossicular replacement was the most frequently adopted surgical procedures in both groups. Overall, audiologically, air-conduction thresholds (ACs) and air-bone gaps were significantly improved over the short- and long-term period in both groups. However, the non-trauma group had significantly higher preoperative ACs than the trauma group, especially at low frequencies. This study provides clinicians with useful information regarding the clinical characteristics of CHL with intact TM of non-inflammatory origin. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

A Review of the Wood Pellet Value Chain, Modern Value/Supply Chain Management Approaches, and Value/Supply Chain Models

Directory of Open Access Journals (Sweden)

Natalie M. Hughes

2014-01-01

Full Text Available We reviewed 153 peer-reviewed sources to provide identification of modern supply chain management techniques and exploration of supply chain modeling, to offer decision support to managers. Ultimately, the review is intended to assist member-companies of supply chains, mainly producers, improve their current management approaches, by directing them to studies that may be suitable for direct application to their supply chains and value chains for improved efficiency and profitability. We found that information on supply chain management and modeling techniques in general is available. However, few Canadian-based published studies exist regarding a demand-driven modeling approach to value/supply chain management for wood pellet production. Only three papers were found specifically on wood pellet value chain analysis. We propose that more studies should be carried out on the value chain of wood pellet manufacturing, as well as demand-driven management and modeling approaches with improved demand forecasting methods.

Logistic chain modelling

NARCIS (Netherlands)

Slats, P.A.; Bhola, B.; Evers, J.J.M.; Dijkhuizen, G.

1995-01-01

Logistic chain modelling is very important in improving the overall performance of the total logistic chain. Logistic models provide support for a large range of applications, such as analysing bottlenecks, improving customer service, configuring new logistic chains and adapting existing chains to

Gushing metal chain

Science.gov (United States)

Belyaev, Alexander; Sukhanov, Alexander; Tsvetkov, Alexander

2016-03-01

This article addresses the problem in which a chain falls from a glass from some height. This phenomenon demonstrates a paradoxical rise of the chain over the glass. To explain this effect, an initial hypothesis and an appropriate theory are proposed for calculating the steady fall parameters of the chain. For this purpose, the modified Cayley's problem of falling chain given its rise due to the centrifugal force of upward inertia is solved. Results show that the lift caused by an increase in linear density at the part of chain where it is being bent (the upper part) is due to the convergence of the chain balls to one another. The experiments confirm the obtained estimates of the lifting chain.

What Can Healthcare Supply Chains Learn from Consumer-Product Supply Chains?

OpenAIRE

Schwarz, Leroy B.

2008-01-01

A Framework for Thinking About Supply-Chain Management: “The IDIB Portfolio” (Information, Decision-making, Implementation, Buffer system) Describe Supply-Chains for Consumer Products Before “Wal-Mart” Describe Supply-Chains for Consumer Products After “Wal-Mart” Describe Stylized Supply Chain for Healthcare Products

Multi-chain Markov chain Monte Carlo methods for computationally expensive models

Science.gov (United States)

Huang, M.; Ray, J.; Ren, H.; Hou, Z.; Bao, J.

2017-12-01

Markov chain Monte Carlo (MCMC) methods are used to infer model parameters from observational data. The parameters are inferred as probability densities, thus capturing estimation error due to sparsity of the data, and the shortcomings of the model. Multiple communicating chains executing the MCMC method have the potential to explore the parameter space better, and conceivably accelerate the convergence to the final distribution. We present results from tests conducted with the multi-chain method to show how the acceleration occurs i.e., for loose convergence tolerances, the multiple chains do not make much of a difference. The ensemble of chains also seems to have the ability to accelerate the convergence of a few chains that might start from suboptimal starting points. Finally, we show the performance of the chains in the estimation of O(10) parameters using computationally expensive forward models such as the Community Land Model, where the sampling burden is distributed over multiple chains.

A Review of the Wood Pellet Value Chain, Modern Value/Supply Chain Management Approaches, and Value/Supply Chain Models

OpenAIRE

Hughes, Natalie M.; Shahi, Chander; Pulkki, Reino

2014-01-01

We reviewed 153 peer-reviewed sources to provide identification of modern supply chain management techniques and exploration of supply chain modeling, to offer decision support to managers. Ultimately, the review is intended to assist member-companies of supply chains, mainly producers, improve their current management approaches, by directing them to studies that may be suitable for direct application to their supply chains and value chains for improved efficiency and profitability. We found...

Decisive Markov Chains

OpenAIRE

Abdulla, Parosh Aziz; Henda, Noomene Ben; Mayr, Richard

2007-01-01

We consider qualitative and quantitative verification problems for infinite-state Markov chains. We call a Markov chain decisive w.r.t. a given set of target states F if it almost certainly eventually reaches either F or a state from which F can no longer be reached. While all finite Markov chains are trivially decisive (for every set F), this also holds for many classes of infinite Markov chains. Infinite Markov chains which contain a finite attractor are decisive w.r.t. every set F. In part...

Modeling sound transmission of human middle ear and its clinical applications using finite element analysis

Directory of Open Access Journals (Sweden)

Shou-I Chen

2013-03-01

Full Text Available We have developed a new finite element (FE model of human right ear, including the accurate geometry of middle ear ossicles, external ear canal, tympanic cavity, and mastoid cavity. The FE model would be suitable to study the dynamic behaviors of pathological middle ear conditions, including changes of stapedial ligament stiffness, tensor tympani ligament (TTL, and tympanic membrane (TM stiffness and thickness. Increasing stiffness of stapedial ligament has substantial effect on stapes footplate movement, especially at low frequencies, but less effect on umbo movement. Softer TTL will result in increasing umbo and stapes footplate displacement, especially at low frequencies (f1500 Hz. As (TM thickness was increased, the umbo displacement was reduced, especially at very low frequencies (f<600 Hz. Otherwise, the stapes displacement was reduced at all frequencies.

Requirements of supply chain management in differentiating European pork chains.

Science.gov (United States)

Trienekens, Jacques; Wognum, Nel

2013-11-01

This paper summarizes results obtained by research into pork chain management in the EU Integrated Project Q-Porkchains. Changing demands for intrinsic and extrinsic quality attributes of pork products impact the way supply chain management should be organized from the farmer down to the consumer. The paper shows the importance of Quality Management Systems for integrating supply chains and enhancing consumer confidence. The paper also presents innovations in information system integration for aligning information exchange in the supply chain and logistics concepts based on innovative measurement technologies at the slaughterhouse stage. In the final section research challenges towards sustainable pork supply chains satisfying current consumer demands are presented. Copyright © 2013 Elsevier Ltd. All rights reserved.

One long chain among shorter chains : the Flory approach revisited

OpenAIRE

Raphaël , E.; Fredrickson , G.; Pincus , P.

1992-01-01

We consider the mean square end-to-end distance of a long chain immersed in a monodisperse, concentrated solution of shorter, chemically identical chains. In contrast with the earlier work of Flory, no simplifying assumption on the wave vector dependence of the effective potential between segments is made. In order to obtain a closed form expression for the dimension of the long chain, we first derive a general expression for the mean square end-to-end distance of a flexible chain with arbitr...

Sustainable Supply Chain Design

DEFF Research Database (Denmark)

Bals, Lydia; Tate, Wendy

A significant conceptual and practical challenge is how to integrate triple bottom line (TBL; including economic, social and environmental) sustainability into global supply chains. Although this integration is necessary to slow down global resource depletion, understanding is limited of how...... to implement TBL goals across the supply chain. In supply chain design, the classic economic perspective still dominates, although the idea of the TBL is more widely disseminated. The purpose of this research is to add to the sustainable supply chain management literature (SSCM) research agenda...... by incorporating the physical chain, and the (information and financial) support chains into supply chain design. This manuscript tackles issues of what the chains are designed for and how they are designed structurally. Four sustainable businesses are used as illustrative case examples of innovative supply chain...

Supply Chain Management og Supply Chain costing

DEFF Research Database (Denmark)

Nielsen, Steen; Mortensen, Ole

2002-01-01

Formålet med denne artikel er at belyse de muligheder som ligger i at integrere virksomhedens økonomiske styring med begrebet Supply Chain Management (SCM). Dette søges belyst ved først at beskrive den teoretiske ramme, hvori SCM indgår. Herefter analyseres begrebet Supply Chain Costing (SCC) som...... Århus. Et resultat er, at via begrebet Supply Chain Costing skabes der mulighed for at måle logistikkædens aktiviteter i kr./øre. Anvendelsen af denne information har også strategisk betydning for at kunne vælge kunde og leverandør. Ved hjælp af integrationen skabes der også helt nye mulighed...

The Use of Supply Chains and Supply Chain Management in the ...

African Journals Online (AJOL)

Dr Peter Schmitz

supply chain management to guide the production of maps. Supply chain management can ... Distribution and logistics. Product flow. Information flow and Money. The Firm. Data from supplier(s) ..... In Global Supply Chains: Developing Skills ...

Architectures for Green-Field Supply Chain Integration: Supply Chain Integration Design

OpenAIRE

Radanliev, Petar

2015-01-01

This paper applied case study research to design architectures for green-field supply chain integration. The integration design is based on a case study of a supply chain integration of 5 companies, operating in different, but supply chain complimenting industry sectors. The case study research is applied to design and validate the architectures in a real world scenario. The supply\\ud chain integration architectures enable the conversion of individual into integrated strategies. The architect...

Pengukuran Kinerja Supply Chain Dengan Pendekatan Supply Chain Operation References (SCOR)

OpenAIRE

Rizki Wahyuniardi; Moh. Syarwani; Ryan Anggani

2017-01-01

PT. Brodo Ganesha Indonesia is a national company engaged in manufacturing with the production of leather shoes. The company has many stakeholders and it is difficult to manage its supply chain, thereby affecting the effectiveness and efficiency of the company's supply chains. The research was conducted to measure the performance of supply chain by using Supply Chain Operation References (SCOR) approach. The initial hierarchy model of performance measurement is tailored to the company's condi...

The role of supply chain collaboration in supply chain risk mitigation

OpenAIRE

Chen, Jie

2017-01-01

In the last two decades, supply chain operations have changed drastically. Globalization of the market, shortened product life cycle, global outsourcing and offshoring, and increasing complexity of the supply base has resulted in modern supply chains becoming more vulnerable than ever. There are also more frequent natural or man-made disasters which disrupt the supply chain operations. All these have led to higher exposure of risks of supply chains and the failure to manage the...

Computed tomography study of otitis media

International Nuclear Information System (INIS)

Bahia, Paulo Roberto Valle; Marchiori, Edson

1997-01-01

The findings of computed tomography (CT) of 89 patients clinically suspected of having otitis media were studied in this work. Such results were compared to clinical diagnosis, otoscopy, surgical findings and previous data. Among the results of our analysis, we studied seven patients with acute otitis media and 83 patients with chronic otitis media. The patients with acute otitis media have undergone CT examinations to evaluate possible spread to central nervous system. The diagnosis of cholesteatoma, its extension and complications were the main indication. for chronic otitis media study. The main findings of the cholesteatomatous otitis were the occupation of the epitympanun, the bony wall destruction and the ossicular chain erosion. The CT demonstrated a great sensibility to diagnose the cholesteatoma. (author)

Temporal bone trauma and complications: computed tomography findings

Energy Technology Data Exchange (ETDEWEB)

Costa, Ana Maria Doffemond; Gaiotti, Juliana Oggioni; Couto, Caroline Laurita Batista; Gomes, Natalia Delage; Diniz, Renata Lopes Furletti Caldeira; Motta, Emilia Guerra Pinto Coelho, E-mail: anadoffemond@yahoo.com.br [Hospital Mater Dei, Belo Horizonte, MG (Brazil). Unit of Radiology and Imaging Diagnosis

2013-03-15

Most temporal bone fractures result from high-energy blunt head trauma, and are frequently related to other skull fractures or to polytrauma. Fractures and displacements of ossicular chain in the middle ear represent some of the main complications of temporal bone injury, and hence they will be more deeply approached in the present article. Other types of injuries include labyrinthine fractures, dural fistula, facial nerve paralysis and extension into the carotid canal. Computed tomography plays a fundamental role in the initial evaluation of polytrauma patients, as it can help to identify important structural injuries that may lead to severe complications such as sensorineural hearing loss, conductive hearing loss, dizziness and balance dysfunction, perilymphatic fistulas, facial nerve paralysis, vascular injury and others. (author)

Temporal bone trauma and complications: computed tomography findings

International Nuclear Information System (INIS)

Costa, Ana Maria Doffemond; Gaiotti, Juliana Oggioni; Couto, Caroline Laurita Batista; Gomes, Natalia Delage; Diniz, Renata Lopes Furletti Caldeira; Motta, Emilia Guerra Pinto Coelho

2013-01-01

Most temporal bone fractures result from high-energy blunt head trauma, and are frequently related to other skull fractures or to polytrauma. Fractures and displacements of ossicular chain in the middle ear represent some of the main complications of temporal bone injury, and hence they will be more deeply approached in the present article. Other types of injuries include labyrinthine fractures, dural fistula, facial nerve paralysis and extension into the carotid canal. Computed tomography plays a fundamental role in the initial evaluation of polytrauma patients, as it can help to identify important structural injuries that may lead to severe complications such as sensorineural hearing loss, conductive hearing loss, dizziness and balance dysfunction, perilymphatic fistulas, facial nerve paralysis, vascular injury and others. (author)

Computed tomography study of otitis media; A tomografia computadorizada no estudo das otites medias

Energy Technology Data Exchange (ETDEWEB)

Bahia, Paulo Roberto Valle; Marchiori, Edson [Universidade Federal, Rio de Janeiro, RJ (Brazil). Dept. de Radiologia

1997-03-01

The findings of computed tomography (CT) of 89 patients clinically suspected of having otitis media were studied in this work. Such results were compared to clinical diagnosis, otoscopy, surgical findings and previous data. Among the results of our analysis, we studied seven patients with acute otitis media and 83 patients with chronic otitis media. The patients with acute otitis media have undergone CT examinations to evaluate possible spread to central nervous system. The diagnosis of cholesteatoma, its extension and complications were the main indication. for chronic otitis media study. The main findings of the cholesteatomatous otitis were the occupation of the epitympanun, the bony wall destruction and the ossicular chain erosion. The CT demonstrated a great sensibility to diagnose the cholesteatoma. (author) 25 refs., 10 figs.

Chain Assembly and Disassembly Processes Differently Affect the Conformational Space of Ubiquitin Chains.

Science.gov (United States)

Kniss, Andreas; Schuetz, Denise; Kazemi, Sina; Pluska, Lukas; Spindler, Philipp E; Rogov, Vladimir V; Husnjak, Koraljka; Dikic, Ivan; Güntert, Peter; Sommer, Thomas; Prisner, Thomas F; Dötsch, Volker

2018-02-06

Ubiquitination is the most versatile posttranslational modification. The information is encoded by linkage type as well as chain length, which are translated by ubiquitin binding domains into specific signaling events. Chain topology determines the conformational space of a ubiquitin chain and adds an additional regulatory layer to this ubiquitin code. In particular, processes that modify chain length will be affected by chain conformations as they require access to the elongation or cleavage sites. We investigated conformational distributions in the context of chain elongation and disassembly using pulsed electron-electron double resonance spectroscopy in combination with molecular modeling. Analysis of the conformational space of diubiquitin revealed conformational selection or remodeling as mechanisms for chain recognition during elongation or hydrolysis, respectively. Chain elongation to tetraubiquitin increases the sampled conformational space, suggesting that a high intrinsic flexibility of K48-linked chains may contribute to efficient proteasomal degradation. Copyright © 2017 Elsevier Ltd. All rights reserved.

CHAIN 2

International Nuclear Information System (INIS)

Bailey, D.

1998-04-01

The Second Processing Chain (CHAIN2) consists of a suite of ten programs which together provide a full local analysis of the bulk plasma physics within the JET Tokamak. In discussing these ten computational models this report is intended to fulfil two broad purposes. Firstly it is meant to be used as a reference source for any user of CHAIN2 data, and secondly it provides a basic User Manual sufficient to instruct anyone in running the CHAIN2 suite of codes. In the main report text each module is described in terms of its underlying physics and any associated assumptions or limitations, whilst deliberate emphasis is put on highlighting the physics and mathematics of the calculations required in deriving each individual datatype in the standard module PPF output. In fact each datatype of the CHAIN2 PPF output listed in Appendix D is cross referenced to the point in the main text where its evaluation is discussed. An effort is made not only to give the equation used to derive a particular data profile but also to explicitly define which external data sources are involved in the computational calculation

Pengukuran Kinerja Supply Chain Dengan Pendekatan Supply Chain Operation References (SCOR

Directory of Open Access Journals (Sweden)

Rizki Wahyuniardi

2017-12-01

Full Text Available PT. Brodo Ganesha Indonesia is a national company engaged in manufacturing with the production of leather shoes. The company has many stakeholders and it is difficult to manage its supply chain, thereby affecting the effectiveness and efficiency of the company's supply chains. The research was conducted to measure the performance of supply chain by using Supply Chain Operation References (SCOR approach. The initial hierarchy model of performance measurement is tailored to the company's condition to measure its supply chain performance, while the normalization of Snorm De Boer serves to equalize the value of the matrix used as the measurement indicator. The level of importance of performance attributes is measured by weighting with subjective questionnaires. Value of performance attribute obtained reliability 19,74, responsiveness 16,91, agility 11,00; and asset management 12.26. The total performance score of 59.90. This value indicates that the performance of the supply chain is in an average position.

Effective food supply chains : generating, modelling and evaluating supply chain scenarios

NARCIS (Netherlands)

Vorst, van der J.G.A.J.

2000-01-01

Logistical co-ordination in FMCG supply chains

The overall objectives of the research described in this thesis were to obtain insight into the applicability of the concept Supply Chain Management (SCM) in food supply chains (SCs) from a logistical point of view, and to

Integrated supply chain risk management

OpenAIRE

Riaan Bredell; Jackie Walters

2007-01-01

Integrated supply chain risk management (ISCRM) has become indispensable to the theory and practice of supply chain management. The economic and political realities of the modern world require not only a different approach to supply chain management, but also bold steps to secure supply chain performance and sustainable wealth creation. Integrated supply chain risk management provides supply chain organisations with a level of insight into their supply chains yet to be achieved. If correctly ...

Supply-Chain Optimization Template

Science.gov (United States)

Quiett, William F.; Sealing, Scott L.

2009-01-01

The Supply-Chain Optimization Template (SCOT) is an instructional guide for identifying, evaluating, and optimizing (including re-engineering) aerospace- oriented supply chains. The SCOT was derived from the Supply Chain Council s Supply-Chain Operations Reference (SCC SCOR) Model, which is more generic and more oriented toward achieving a competitive advantage in business.

Self-lacing atom chains

International Nuclear Information System (INIS)

Zandvliet, Harold J W; Van Houselt, Arie; Poelsema, Bene

2009-01-01

The structural and electronic properties of self-lacing atomic chains on Pt modified Ge(001) surfaces have been studied using low-temperature scanning tunnelling microscopy and spectroscopy. The self-lacing chains have a cross section of only one atom, are perfectly straight, thousands of atoms long and virtually defect free. The atomic chains are composed of dimers that have their bonds aligned in a direction parallel to the chain direction. At low temperatures the atomic chains undergo a Peierls transition: the periodicity of the chains doubles from a 2 x to a 4 x periodicity and an energy gap opens up. Furthermore, at low temperatures (T<80 K) novel quasi-one-dimensional electronic states are found. These quasi-one-dimensional electronic states originate from an electronic state of the underlying terrace that is confined between the atomic chains.

Supply Chain Systems Architecture and Engineering Design: Green-field Supply Chain Integration

OpenAIRE

Radanliev, P

2015-01-01

This paper developed a new theory for supply chain architecture, and engineering design that enables integration of the business and supply chain strategies. The architecture starts with individual supply chain participants and derives insights into the complex and abstract concept of green-field integration design. The paper presented a conceptual system for depicting the interactions between business and supply chain strategy engineering. The system examines the decisions made when engineer...

Supply chain planning classification

Science.gov (United States)

Hvolby, Hans-Henrik; Trienekens, Jacques; Bonde, Hans

2001-10-01

Industry experience a need to shift in focus from internal production planning towards planning in the supply network. In this respect customer oriented thinking becomes almost a common good amongst companies in the supply network. An increase in the use of information technology is needed to enable companies to better tune their production planning with customers and suppliers. Information technology opportunities and supply chain planning systems facilitate companies to monitor and control their supplier network. In spite if these developments, most links in today's supply chains make individual plans, because the real demand information is not available throughout the chain. The current systems and processes of the supply chains are not designed to meet the requirements now placed upon them. For long term relationships with suppliers and customers, an integrated decision-making process is needed in order to obtain a satisfactory result for all parties. Especially when customized production and short lead-time is in focus. An effective value chain makes inventory available and visible among the value chain members, minimizes response time and optimizes total inventory value held throughout the chain. In this paper a supply chain planning classification grid is presented based current manufacturing classifications and supply chain planning initiatives.

Computed tomography of the ossicles

International Nuclear Information System (INIS)

Chakeres, D.W.; Weider, D.J.

1985-01-01

Otologists and otolaryngologists have described in detail the disorders which are unique to the ossicles. However the anatomy and spectrum of pathology and anatomy of the ossicles are not familiar to most radiologists. Recent advances in computed tomography (CT) and a systematic approach to evaluation now allow accurate identification of even subtle abnormalities of the ossicles. We present the normal anatomy, ossicular abnormalities, and indications for computed tomographic study. Because of the greater diagnostic capability of CT, the radiologist's role has increased in evaluation and treatment planning of patients with suspected ossicular abnormalities. (orig.)

Modeling microstructure of incudostapedial joint and the effect on cochlear input

Science.gov (United States)

Gan, Rong Z.; Wang, Xuelin

2015-12-01

The incudostapedial joint (ISJ) connects the incus to stapes in human ear and plays an important role for sound transmission from the tympanic membrane (TM) to cochlea. ISJ is a synovial joint composed of articular cartilage on the lenticular process and stapes head with the synovial fluid between them. However, there is no study on how the synovial ISJ affects the middle ear and cochlear functions. Recently, we have developed a 3-dimensinal finite element (FE) model of synovial ISJ and connected the model to our comprehensive FE model of the human ear. The motions of TM, stapes footplate, and basilar membrane and the pressures in scala vestibule and scala tympani were derived over frequencies and compared with experimental measurements. Results show that the synovial ISJ affects sound transmission into cochlea and the frequency-dependent viscoelastic behavior of ISJ provides protection for cochlea from high intensity sound.

Abnormal Congenital Location of Stapes’ Superstructure: Clinical and Embryological Implications

Directory of Open Access Journals (Sweden)

Vânia Henriques

2016-01-01

Full Text Available Congenital middle ear malformations are rare. Most part of them are usually associated with other malformations, such as aural atresia, microtia, and dysmorphic craniofacial features. A clinical case of a 24-year-old male with a right-sided conductive hearing loss since his childhood, without craniofacial malformation, is presented. He was proposed for exploratory tympanotomy under the suspicious diagnosis of otosclerosis. The surgery revealed an abnormal location of stapes’ superstructure, which was attached to the promontory and had an isolated and mobile osseous footplate in the oval window. A stapes prosthesis was inserted and resulted in closure of the air-bone gap by 25 dB. A review of the literature was also performed using MEDLINE. Two theories diverge on the embryologic origin of the stapes. Our findings seem to be in favour of the theory that defines two different embryologic origins to the stapes.

A 1,470 nm diode laser in stapedotomy: Mechanical, thermal, and acoustic effects.

Science.gov (United States)

Koenraads, Simone P C; de Boorder, Tjeerd; Grolman, Wilko; Kamalski, Digna M A

2017-08-01

Multiple laser systems have been investigated for their use in stapes surgery in patients with otosclerosis. The diode 1,470 nm laser used in this study is an attractive laser system because it is easily transported and relatively inexpensive in use. This wavelength has relative high absorption in water. This study aimed to investigate the mechanical, thermal, and acoustic effects of the diode 1,470 nm laser on a stapes in an inner ear model. Experiments were performed in an inner ear model including fresh frozen human stapes. High-speed imaging with frame rates up to 2,000 frames per second (f/s) was used to visualize the effects in the vestibule during fenestration of the footplate. A special high-speed color Schlieren technique was used to study thermal effects. The sound produced by perforation was recorded by a hydrophone. Single pulse settings of the diode 1,470 nm laser were 100 ms, 3 W. Diode 1,470 nm laser fenestration showed mechanical effects with small vapor bubbles and pressure waves pushed into the vestibule. Thermal imaging visualized an increase temperature underneath the stapes footplate. Acoustic effects were limited, but larger sounds levels were reached when vaporization bubbles arise and explode in the vestibule. The diode 1,470 nm laser highly absorbs in perilymph and is capable of forming a clear fenestration in the stapes. An overlapping laser pulse will increase the risk of vapor bubbles, pressure waves, and heating the vestibule. As long as we do not know the possible damage of these effects to the inner ear function, it seems advisable to use the laser with less potential harm. Lasers Surg. Med. 49:619-624, 2017. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

Integrated supply chain risk management

Directory of Open Access Journals (Sweden)

Riaan Bredell

2007-11-01

Full Text Available Integrated supply chain risk management (ISCRM has become indispensable to the theory and practice of supply chain management. The economic and political realities of the modern world require not only a different approach to supply chain management, but also bold steps to secure supply chain performance and sustainable wealth creation. Integrated supply chain risk management provides supply chain organisations with a level of insight into their supply chains yet to be achieved. If correctly applied, this process may optimise management decision-making and assist in the protection and enhancement of shareholder value.

Fresh fish distribution chains: An analysis of three Danish and three Australian chains

DEFF Research Database (Denmark)

Frederiksen, Marco Thorup; Bremner, Allan

2001-01-01

. Traceability is a most important issue in the high value product chains in Australia. No information technology methods, were in evidence. In the Danish chains, nearly all traceability was lost after the collector/auction stage and the only evaluation of quality parameters was by inspection.......Information on traceability was gathered for three domestic Danish fish chains typical of the current trading practices in fresh seafood and for three chains exporting products from Australia to Japan. The same standard questionnaires, coupled with personal interviews, were used in all six chains...

Chain transitivity in hyperspaces

International Nuclear Information System (INIS)

Fernández, Leobardo; Good, Chris; Puljiz, Mate; Ramírez, Ártico

2015-01-01

Given a non-empty compact metric space X and a continuous function f: X → X, we study the dynamics of the induced maps on the hyperspace of non-empty compact subsets of X and on various other invariant subspaces thereof, in particular symmetric products. We show how some important dynamical properties transfer across induced systems. These amongst others include, chain transitivity, chain (weakly) mixing, chain recurrence, exactness by chains. From our main theorem we derive an ε-chain version of Furstenberg’s celebrated 2 implies n Theorem. We also show the implications our results have for dynamics on continua.

Understanding your supply chain to reduce the risk of supply chain disruption.

Science.gov (United States)

Wildgoose, Nick; Brennan, Patrick; Thompson, Simon

2012-01-01

Supply chains are at the heart of the way in which organisations operate and compete today; they also play a critical role in overall organisation performance. In the context of increasingly complex and global supply chains, the actions taken to drive down costs are likely to drive risk into the supply chain. The frequency of supply chain disruptions is high and this paper offers practical advice to help reduce the frequency and cost associated with these. There is advice to help with the understanding of how to identify critical suppliers. The reader is guided through comprehensive risk assessment and mitigation approaches and a selection of practical risk solutions and tools that you can use is described. There is a section on the 'dos and don'ts' relating to supplier due diligence. For those organisations facing the challenge of drawing up a business case relating to investment in improving supply chain resiliency, there is also a section outlining some of the business benefits of improving supply chain resiliency.

Supply chain components

OpenAIRE

Vieraşu, T.; Bălăşescu, M.

2011-01-01

In this article I will go through three main logistics components, which are represented by: transportation, inventory and facilities, and the three secondary logistical components: information, production location, price and how they determine performance of any supply chain. I will discuss then how these components are used in the design, planning and operation of a supply chain. I will also talk about some obstacles a supply chain manager may encounter.

Endoscopy-Assisted Ear Surgery for Treatment of Chronic Otitis Media With Cholesteatoma, Adhesion, or Retraction Pockets.

Science.gov (United States)

Ulku, Cagatay Han

2017-06-01

The objective of this study was to analyze the results of endoscopy-assisted ear surgery for the treatment of chronic otitis media with cholesteatoma, adhesion, or retraction pockets.Fifty-one patients who underwent oto-endoscopy-assisted canal wall up tympanomastoid surgery and/or limited anterior atticotomy with tympanoplasty for chronic otitis media with cholesteatoma, adhesion, or retraction pocket from 2006 to 2013 have been included in this study. Eradication of the disease from the middle ear and mastoid air cells was achieved by combination of the oto-microscobic and oto-endoscopic approaches. Second look surgery was performed 18 months later from the initial surgery in selected patients. Age, gender, pre-/postoperative otoscopy findings/audiograms, type of the used prostheses, and follow-up time were obtained from the patient's file. Anatomic integrity rates of the tympanic membrane, the mean gains of air bone gap, on pure-tone audiogram at 4 frequencies and existence of the residual disease were reviewed parameters. Functional evaluation was made in patients with intact tympanic membrane.Of the 51 patients, the ratios of the chronic otitis media with cholesteatoma and isolated adhesive otitis or retraction pocket cases were 74.5% (38/51) and 25.5% (13/51), respectively. Ossicular chain reconstruction was made with PORP in 27 patients and TORP in 20 patients, whereas the ossicular chain was intact in 4 patients. Anatomic integrity rates of the tympanic membrane were 90.2% (46/51). The overall (n = 46) pre-/postoperative mean ABG obtained at 4 frequencies were 28.3 ± 12.26 and 9.18 ± 5.68 dB (P otitis media with cholesteatoma patients. However, there was no recurrence or new cholesteatoma formation in isolated retraction pockets or adhesive otitis patients.Oto-endoscopic eradication of the cholesteatoma or epithelial tissue from hidden area after the all visible cholesteatoma removal by oto-microscope improves the quality of surgery

Disrupted bone remodeling leads to cochlear overgrowth and hearing loss in a mouse model of fibrous dysplasia.

Directory of Open Access Journals (Sweden)

Omar Akil

Full Text Available Normal hearing requires exquisite cooperation between bony and sensorineural structures within the cochlea. For example, the inner ear secretes proteins such as osteoprotegrin (OPG that can prevent cochlear bone remodeling. Accordingly, diseases that affect bone regulation can also result in hearing loss. Patients with fibrous dysplasia develop trabecular bone overgrowth resulting in hearing loss if the lesions affect the temporal bones. Unfortunately, the mechanisms responsible for this hearing loss, which could be sensorineural and/or conductive, remain unclear. In this study, we used a unique transgenic mouse model of increased Gs G-protein coupled receptor (GPCR signaling induced by expression of an engineered receptor, Rs1, in osteoblastic cells. These ColI(2.3+/Rs1+ mice showed dramatic bone lesions that histologically and radiologically resembled fibrous dysplasia. We found that ColI(2.3+/Rs1+ mice showed progressive and severe conductive hearing loss. Ossicular chain impingement increased with the size and number of dysplastic lesions. While sensorineural structures were unaffected, ColI(2.3+/Rs1+ cochleae had abnormally high osteoclast activity, together with elevated tartrate resistant acid phosphatase (TRAP activity and receptor activator of nuclear factor kappa-B ligand (Rankl mRNA expression. ColI(2.3+/Rs1+ cochleae also showed decreased expression of Sclerostin (Sost, an antagonist of the Wnt signaling pathway that normally increases bone formation. The osteocyte canalicular networks of ColI(2.3+/Rs1+ cochleae were disrupted and showed abnormal osteocyte morphology. The osteocytes in the ColI(2.3+/Rs1+ cochleae showed increased expression of matrix metalloproteinase 13 (MMP-13 and TRAP, both of which can support osteocyte-mediated peri-lacunar remodeling. Thus, while the ossicular chain impingement is sufficient to account for the progressive hearing loss in fibrous dysplasia, the deregulation of bone remodeling extends to the

Stochastic Simulation of a Full-Chain Reptation Model with Constraint Release, Chain-Length Fluctuations and Chain Stretching

DEFF Research Database (Denmark)

Neergaard, Jesper; Schieber, Jay D.

1999-01-01

A self-consistent reptation model that includes chain stretching, chain-length fluctuations, segment connectivity and constraint release is used to predict transient and steady flows. Quantitative comparisons are made with entangledsolution data. The model is able to capture quantitatively all...

Measuring performance at the supply chain level: the role of the chain director

Directory of Open Access Journals (Sweden)

Job A.C. De Haan

2016-05-01

The findings show when an attempt to implement a PMS at the supply chain level might be appropriate and effective (if a chain exists and has a director, and how the system’s content should be focused on what is needed to improve chain performance (with end customers’ demands as a starting point. The paper highlights the benefits obtained by the other partners if they comply with the best informed supply chain member in the development of the chain’s PMS, as well as how a PMS cannot be developed when none of the partners can be labelled as chain director.

Supply Chain Management Practices in Toy Supply Chains

DEFF Research Database (Denmark)

Arlbjørn, Jan Stentoft; Johansen, J.; Wong, C. Y.

2005-01-01

Purpose - Innovative products usually experience highly unpredictable and variable demand. This is especially valid for the volatile and seasonal toy industry, which produces high obsolete inventory, lost sales and markdown. In such a volatile industry, what supply chain management (SCM) practices...... (traditional mass-production or push-models). These low-responsive practices in the toy supply chain are not caused only by slow knowledge diffusion. SCM know-how is not yet capable of managing such levels of volatility and seasonality. Therefore, explanations of these theoretical gaps and what new theories...... are required for such extreme volatility and seasonality are proposed. Originality/value - It reveals actual SCM practices in a volatile and seasonal supply chain, such that theoretical and practical gaps are identified. Also, it proposes a model to match manufacturing SCM-practices with retailer SCM-practices....

Supply chain components

Directory of Open Access Journals (Sweden)

Vieraşu, T.

2011-01-01

Full Text Available In this article I will go through three main logistics components, which are represented by: transportation, inventory and facilities, and the three secondary logistical components: information, production location, price and how they determine performance of any supply chain. I will discuss then how these components are used in the design, planning and operation of a supply chain. I will also talk about some obstacles a supply chain manager may encounter.

Markov Tail Chains

OpenAIRE

janssen, Anja; Segers, Johan

2013-01-01

The extremes of a univariate Markov chain with regularly varying stationary marginal distribution and asymptotically linear behavior are known to exhibit a multiplicative random walk structure called the tail chain. In this paper we extend this fact to Markov chains with multivariate regularly varying marginal distributions in Rd. We analyze both the forward and the backward tail process and show that they mutually determine each other through a kind of adjoint relation. In ...

The Global Value Chain

DEFF Research Database (Denmark)

Sørensen, Olav Jull

The conference paper aims to develop the global value chain concept by including corporate internal value adding activities and competition to the basic framework in order to turn the global value chain into a strategic management tool......The conference paper aims to develop the global value chain concept by including corporate internal value adding activities and competition to the basic framework in order to turn the global value chain into a strategic management tool...

Mesoscale simulation of semiflexible chains. I. Endpoint distribution and chain dynamics

Science.gov (United States)

Groot, Robert D.

2013-06-01

The endpoint distribution and dynamics of semiflexible fibers are studied by numerical simulation. A brief overview is given over the analytical theory of flexible and semiflexible polymers. In particular, a closed expression is given for the relaxation spectrum of wormlike chains, which determines polymer diffusion and rheology. Next a simulation model for wormlike chains with full hydrodynamic interaction is described, and relations for the bending and torsion modulus are given. Two methods are introduced to include torsion stiffness into the model. The model is validated by simulating single chains in a heat bath, and comparing the endpoint distribution of the chains with established Monte Carlo results. It is concluded that torsion stiffness leads to a slightly shorter effective persistence length for a given bending stiffness. To further validate the simulation model, polymer diffusion is studied for fixed persistence length and varying polymer length N. The diffusion constant shows crossover from Rouse (D ∝ N-1) to reptation behaviour (D ∝ N-2). The terminal relaxation time obtained from the monomer displacement is consistent with the theory of wormlike chains. The probability for chain crossing has also been studied. This probability is so low that it does not influence the present results.

The design of supply chains

OpenAIRE

Bøge Sørensen, Lars

2004-01-01

Keywords Supply Chain Management, Supply Chain Design, Literature study Abstract Argues stability is a design objective for supply chain design alongside cost, lead time and responsiveness. Performs an extensive literature study on supply chain design, identifies methods, theories and objectives in the existing literature. Describes the concept external specificity and how it’s used to design supply chains. Using the concept upstream, archetypes of risk minimal and maximal desi...

Analysis of Supply Chain Risk Management Strategies: Case Study of Supply Chain Disruptions

OpenAIRE

Marcelo Dias Carvalho; Leticia Ishikawa

2016-01-01

Supply Chain Risk Management refers to a set of strategies used by companies to avoid supply chain disruption caused by damage at production facilities, natural disasters, capacity issues, inventory problems, incorrect forecasts, and delays. Many companies use the techniques of the Toyota Production System, which in a way goes against a better management of supply chain risks. This paper studies key events in some multinationals to analyze the trade-off between the best supply chain risk mana...

Editorial: Supply Chain Management

Directory of Open Access Journals (Sweden)

Dimitrios Aidonis

2017-05-01

Full Text Available This special issue has followed up the 3rd Olympus International Conference on Supply Chains held on Athens Metropolitan Expo, November 7 & 8 2015, Greece. The Conference was organized by the Department of Logistics Technological Educational Institute of Central Macedonia, in collaboration with the: a Laboratory of Quantitative Analysis, Logistics and Supply Chain Management of the Department of Mechanical Engineering, Aristotle University of Thessaloniki (AUTH, b Greek Association of Supply Chain Management (EEL of Northern Greece and the c Supply Chain & Logistics Journal. During the 2-Days Conference more than 60 research papers were presented covering the following thematic areas: (i Transportation, (ii Best Practices in Logistics, (iii Information and Communication Technologies in Supply Chain Management, (iv Food Logistics, (v New Trends in Business Logistics, and (vi Green Supply Chain Management. Three keynote invited speakers addressed interesting issues for the Operational Research, the Opportunities and Prospects of Greek Ports chaired Round Tables with other Greek and Foreign Scientists and Specialists.

Alignment between chain quality management and chain governance in EU pork supply chains: a Transaction-Cost-Economics perspective.

Science.gov (United States)

Wever, Mark; Wognum, Nel; Trienekens, Jacques; Omta, Onno

2010-02-01

Although inter-firm coordination of quality management is increasingly important for meeting end-customer demand in agri-food chains, few researchers focus on the relation between inter-firm quality management systems (QMS) and inter-firm governance structures (GS). However, failure to align QMSs and GSs may lead to inefficiencies in quality management because of high transaction-costs. In addition, misalignment is likely to reduce the quality of end-customer products. This paper addresses this gap in research by empirically examining the relation between QMSs and GSs in pork meat supply chains. Transaction-Cost-Economic theory is used to develop propositions about the relation between three aspects of QMSs--ownership, vertical scope and scale of adoption--and the use of different types of GSs in pork meat supply chains. To validate the propositions, seven cases are examined from four different countries. The results show that the different aspects of QMSs largely relate to specific GSs used in chains in the manner predicted by the propositions. This supports the view that alignment between QMSs and GSs is important for the efficient coordination of quality management in (pork meat) supply chains.

The design of supply chains

DEFF Research Database (Denmark)

Bøge Sørensen, Lars

2004-01-01

Keywords Supply Chain Management, Supply Chain Design, Literature studyAbstract Argues stability is a design objective for supply chain design alongside cost, leadtime and responsiveness. Performs an extensive literature study on supply chain design,identifies methods, theories and objectives...... in the existing literature. Describes the conceptexternal specificity and how it's used to design supply chains. Using the concept upstream,archetypes of risk minimal and maximal design are identified. Downstream the conceptdescribes two viable scenarios, one minimizing the impact, the other minimizing...... theprobability of (intended) departure of a supply chain partner. Finally, principles for supplychain design are described and managerial outlined....

Requirements of supply chain management in differentiating European pork chains

NARCIS (Netherlands)

Trienekens, J.H.; Wognum, P.M.

2013-01-01

This paper summarizes results obtained by research into pork chain management in the EU Integrated Project Q-Porkchains. Changing demands for intrinsic and extrinsic quality attributes of pork products impact the way supply chain management should be organized from the farmer down to the consumer.

The triple-A supply chain.

Science.gov (United States)

Lee, Hau L

2004-10-01

Building a strong supply chain is essential for business success. But when it comes to improving their supply chains, few companies take the right approach. Many businesses work to make their chains faster or more cost-effective, assuming that those steps are the keys to competitive advantage. To the contrary: Supply chains that focus on speed and costs tend to deteriorate over time. The author has spent 15 years studying more than 60 companies to gain insight into this and other supply chain dilemmas. His conclusion: Only companies that build supply chains that are agile, adaptable, and aligned get ahead of their rivals. All three components are essential; without any one of them, supply chains break down. Great companies create supply chains that respond to abrupt changes in markets. Agility is critical because in most industries, both demand and supply fluctuate rapidly and widely. Supply chains typically cope by playing speed against costs, but agile ones respond both quickly and cost-efficiently. Great companies also adapt their supply networks when markets or strategies change. The best supply chains allow managers to identify structural shifts early by recording the latest data, filtering out noise, and tracking key patterns. Finally, great companies align the interests of the partners in their supply chains with their own. That's important because every firm is concerned solely with its own interests. If its goals are out of alignment with those of other partners in the supply chain, performance will suffer. When companies hear about the triple-A supply chain, they assume that building one will require increased technology and investment. But most firms already have the infrastructure in place to create one. A fresh attitude alone can go a long way toward making it happen.

The composite supply chain efficiency model: A case study of the Sishen-Saldanha supply chain

Directory of Open Access Journals (Sweden)

Leila L. Goedhals-Gerber

2016-01-01

Full Text Available As South Africa strives to be a major force in global markets, it is essential that South African supply chains achieve and maintain a competitive advantage. One approach to achieving this is to ensure that South African supply chains maximise their levels of efficiency. Consequently, the efficiency levels of South Africa’s supply chains must be evaluated. The objective of this article is to propose a model that can assist South African industries in becoming internationally competitive by providing them with a tool for evaluating their levels of efficiency both as individual firms and as a component in an overall supply chain. The Composite Supply Chain Efficiency Model (CSCEM was developed to measure supply chain efficiency across supply chains using variables identified as problem areas experienced by South African supply chains. The CSCEM is tested in this article using the Sishen-Saldanda iron ore supply chain as a case study. The results indicate that all three links or nodes along the Sishen-Saldanha iron ore supply chain performed well. The average efficiency of the rail leg was 97.34%, while the average efficiency of the mine and the port were 97% and 95.44%, respectively. The results also show that the CSCEM can be used by South African firms to measure their levels of supply chain efficiency. This article concludes with the benefits of the CSCEM.

Performance analysis of Supply Chain Management with Supply Chain Operation reference model

Science.gov (United States)

Hasibuan, Abdurrozzaq; Arfah, Mahrani; Parinduri, Luthfi; Hernawati, Tri; Suliawati; Harahap, Bonar; Rahmah Sibuea, Siti; Krianto Sulaiman, Oris; purwadi, Adi

2018-04-01

This research was conducted at PT. Shamrock Manufacturing Corpora, the company is required to think creatively to implement competition strategy by producing goods/services that are more qualified, cheaper. Therefore, it is necessary to measure the performance of Supply Chain Management in order to improve the competitiveness. Therefore, the company is required to optimize its production output to meet the export quality standard. This research begins with the creation of initial dimensions based on Supply Chain Management process, ie Plan, Source, Make, Delivery, and Return with hierarchy based on Supply Chain Reference Operation that is Reliability, Responsiveness, Agility, Cost, and Asset. Key Performance Indicator identification becomes a benchmark in performance measurement whereas Snorm De Boer normalization serves to equalize Key Performance Indicator value. Analiytical Hierarchy Process is done to assist in determining priority criteria. Measurement of Supply Chain Management performance at PT. Shamrock Manufacturing Corpora produces SC. Responsiveness (0.649) has higher weight (priority) than other alternatives. The result of performance analysis using Supply Chain Reference Operation model of Supply Chain Management performance at PT. Shamrock Manufacturing Corpora looks good because its monitoring system between 50-100 is good.

Radiation induced solid-state polymerization of long-chain acrylates containing fluorocarbon chain

International Nuclear Information System (INIS)

Shibasaki, Y.; Zhu, Zhi-Qin

1995-01-01

γ-Ray irradiation post-polymerizations of long-chain acrylates containing fluorocarbon chain, H(CF 2 ) 10 CH 2 OCOCH=CH 2 and H(CF 2 ) 8 CH 2 OCOCH=CH 2 , were investigated and also the structures and thermal properties of comb-like polymers obtained were studied. It was found that these monomers exhibited very high polymerizability at wide temperature ranges around the melting points. Because the fluorocarbon chains are less flexible and thicker than the hydrocarbon chains, it can be expected that the aggregation force among the monomer molecules is strong and the conformational freedom of functional group for polymerization is large. According to the DSC and the X-ray diffraction measurements of the comb-like polymers obtained, the fluorocarbon chains are aggregated in a mode of hexagonal packing in the lamellar crystals. This situation can be considered as an optimum condition for the γ-ray irradiation post-polymerization. (author)

USING A NEW SUPPLY CHAIN PLANNING METHODOLOGY TO IMPROVE SUPPLY CHAIN EFFICIENCY

Directory of Open Access Journals (Sweden)

A.L.V. Raubenheimer

2012-01-01

Full Text Available

ENGLISH ABSTRACT: Effective supply chain planning and management has emerged as one of the most challenging opportunities for companies in the global economy during the last decade or two. This article reviews the evolution of Supply Chain Management and the traditional Supply Chain Solutions. It then introduces a new Supply Chain Planning methodology in which simulation modelling plays an important value-adding role to help organisations understand the dynamics of their Supply Chains.

AFRIKAANSE OPSOMMING:Effektiewe voorsieningskettingbeplanning en –bestuur het gedurende die laaste twee dekades ontwikkel tot een van die mees uitdagende geleenthede vir ondernemings in die wêreldekonomie. Hierdie artikel hersien kortliks die ontwikkeling van voorsieningskettingbestuur en die tradisionele oplossings. ‘n Nuwe voorsieningskettingbeplanningsmetodologie word dan voorgestel en bespreek waarin simulasiemodellering ‘n belangrike rol speel om ondernemings te help om die dinamika van hul voorsieningskettings te begryp.

The role of enterprise systems in supply chain networks: a taxonomy of supply chain strategies

DEFF Research Database (Denmark)

Møller, Charles

2006-01-01

in the supply chain and to choose the right supply chain strategy. The work is based on a comprehensive study of the Supply Chain Management (SCM) and Enterprise Resource Planning (ERP) literature and the study suggests that there is an emerging new research potential for Enterprise Systems (ES) in the supply......This paper proposes a taxonomy for supply chain integration strategies. The taxonomy is based on the contingencies of supply chain network coupling and the Extended Enterprise Systems (EES) architecture in the supply chain. The purpose of this model is to map the portfolio of relations...

DOS cones along atomic chains

International Nuclear Information System (INIS)

Kwapiński, Tomasz

2017-01-01

The electron transport properties of a linear atomic chain are studied theoretically within the tight-binding Hamiltonian and the Green’s function method. Variations of the local density of states (DOS) along the chain are investigated. They are crucial in scanning tunnelling experiments and give important insight into the electron transport mechanism and charge distribution inside chains. It is found that depending on the chain parity the local DOS at the Fermi level can form cone-like structures (DOS cones) along the chain. The general condition for the local DOS oscillations is obtained and the linear behaviour of the local density function is confirmed analytically. DOS cones are characterized by a linear decay towards the chain which is in contrast to the propagation properties of charge density waves, end states and Friedel oscillations in one-dimensional systems. We find that DOS cones can appear due to non-resonant electron transport, the spin–orbit scattering or for chains fabricated on a substrate with localized electrons. It is also shown that for imperfect chains (e.g. with a reduced coupling strength between two neighboring sites) a diamond-like structure of the local DOS along the chain appears. (paper)

DOS cones along atomic chains

Science.gov (United States)

Kwapiński, Tomasz

2017-03-01

The electron transport properties of a linear atomic chain are studied theoretically within the tight-binding Hamiltonian and the Green’s function method. Variations of the local density of states (DOS) along the chain are investigated. They are crucial in scanning tunnelling experiments and give important insight into the electron transport mechanism and charge distribution inside chains. It is found that depending on the chain parity the local DOS at the Fermi level can form cone-like structures (DOS cones) along the chain. The general condition for the local DOS oscillations is obtained and the linear behaviour of the local density function is confirmed analytically. DOS cones are characterized by a linear decay towards the chain which is in contrast to the propagation properties of charge density waves, end states and Friedel oscillations in one-dimensional systems. We find that DOS cones can appear due to non-resonant electron transport, the spin-orbit scattering or for chains fabricated on a substrate with localized electrons. It is also shown that for imperfect chains (e.g. with a reduced coupling strength between two neighboring sites) a diamond-like structure of the local DOS along the chain appears.

Chain Dynamics in Magnetorheological Suspensions

Science.gov (United States)

Gast, A. P.; Furst, E. M.

1999-01-01

Magnetorheological (MR) suspensions are composed of colloidal particles which acquire dipole moments when subjected to an external magnetic field. At sufficient field strengths and concentrations, the dipolar particles rapidly aggregate to form long chains. Subsequent lateral cross-linking of the dipolar chains is responsible for a rapid liquid-to-solid-like rheological transition. The unique, magnetically-activated rheological properties of MR suspensions make them ideal for interfacing mechanical systems to electronic controls. Additionally, the ability to experimentally probe colloidal suspensions interacting through tunable anisotropic potentials is of fundamental interest. Our current experimental work has focused on understanding the fluctuations of dipolar chains. It has been proposed by Halsey and Toor (HT) that the strong Landau-Peierls thermal fluctuations of dipolar chains could be responsible for long-range attractions between chains. Such interactions will govern the long-time relaxation of MR suspensions. We have synthesized monodisperse neutrally buoyant MR suspensions by density matching stabilized ferrofluid emulsion droplets with D2O. This allows us to probe the dynamics of the dipolar chains using light scattering without gravitational, interfacial, and polydispersity effects to resolve the short-wavelength dynamics of the dipolar chains. We used diffusing wave spectroscopy to measure these dynamics. The particle displacements at short times that show an independence to the field strength, but at long times exhibit a constrained, sub-diffusive motion that slows as the dipole strength is increased. The experiments are in good qualitative agreement with Brownian dynamics simulations of dipolar chains. Although there have been several important and detailed studies of the structure and interactions in MR suspensions, there has not been conclusive evidence that supports or contradicts the HT model prediction that long-range interactions exist between

THE ROLE OF SUPPLY CHAIN COLLABORATION ON SUSTAINABLE SUPPLY CHAIN MANAGEMENT PERFORMANCE

OpenAIRE

Ince, Huseyin; Ince, Andac Sahinbey

2015-01-01

Sustainable supply chain management and collaboration have taken big attention from academicians and practitioners. The extensive literature review is conducted to analyse the relationship between Sustainable Supply Chain Management and collaboration and its effects on performance of SSCM dimensions. Then, a framework is proposed to explain the relationship between sustainable supply chain management and collaboration. For further studies the proposed framework should be tested empirically.

Chain-modified radioiodinated fatty acids

International Nuclear Information System (INIS)

Otto, C.A.

1987-01-01

Several carbon chain manipulations have been studied in terms of their effects on myocardial activity levels and residence time. The manipulations examined included: chain length, chain branching, chain unsaturation, and carbon-iodine bond stabilization. It was found that chain length affects myocardial activity levels for both straight-chain alkyl acids and branched chain alkyl and aryl acids. Similar results have been reported for the straight-chain aryl acids. Generally, the longer chain lengths correlated with higher myocardial activity levels and longer residence times. This behavior is attributed to storage as triglycerides. Branched chain acids are designed to be anti-metabolites but only the aryl β-methyl acids possessed the expected time course of constant or very slowly decreasing activity levels. The alkyl β-methyl acids underwent rapid deiodination - a process apparently independent of β-oxidation. Inhibition of β-oxidation by incorporation of carbon-carbon double and triple bonds was studied. Deiodination of ω-iodo alkyl fatty acids prevented an assessment of suicide inhibition using an unsaturated alkynoic acid. Stabilization of the carbon-iodine bond by attachment of iodine to a vinylic or aryl carbon was studied. The low myocardial values and high blood values observed for an eleven carbon ω-iodo vinylic fatty acid were not encouraging but ω-iodo aryl fatty acids appear to avoid the problems of rapid deiodination. (Auth.)

The Service-profit Chain

DEFF Research Database (Denmark)

Grønholdt, Lars; Martensen, Anne

2016-01-01

This paper examines the links between employee attitudes, customer loyalty and company profitability. From a conceptual point of view, this employee-customer-profit chain, also known as the service-profit chain, is well founded and generally accepted. But for many companies, it seems difficult...... to demonstrate such links, and several issues must be addressed to uncover the links. To investigate these links empirically, a hotel chain provided data matching employee and customer measures with measures of profitability. We have successfully employed a modeling approach, and the paper reports empirical...... evidence of the employee-customer-profit chain. As it is possible to estimate the links, we have demonstrated their effect on company profitability. The research findings provide a better understanding of the service-profit chain and may help practitioners in improving company financial performance....

Plastic value chains

DEFF Research Database (Denmark)

Baxter, John; Wahlstrom, Margareta; Zu Castell-Rüdenhausen, Malin

2014-01-01

Optimizing plastic value chains is regarded as an important measure in order to increase recycling of plastics in an efficient way. This can also lead to improved awareness of the hazardous substances contained in plastic waste, and how to avoid that these substances are recycled. As an example......, plastics from WEEE is chosen as a Nordic case study. The project aims to propose a number of improvements for this value chain together with representatives from Nordic stakeholders. Based on the experiences made, a guide for other plastic value chains shall be developed....

Project Decision Chain

DEFF Research Database (Denmark)

Rolstadås, Asbjørn; Pinto, Jeffrey K.; Falster, Peter

2015-01-01

To add value to project performance and help obtain project success, a new framework for decision making in projects is defined. It introduces the project decision chain inspired by the supply chain thinking in the manufacturing sector and uses three types of decisions: authorization, selection......, and plan decision. A primitive decision element is defined where all the three decision types can be accommodated. Each task in the primitive element can in itself contain subtasks that in turn will comprise new primitive elements. The primitive elements are nested together in a project decision chain....

Essentials of supply chain management

CERN Document Server

Hugos, Michael H

2011-01-01

The latest thinking, strategies, developments, and technologies to stay current in supply chain management Presenting the core concepts and techniques of supply chain management in a clear, concise and easily readable style, the Third Edition of Essentials of Supply Chain Management outlines the most crucial tenets and concepts of supply chain management.

A remark on Dickey's stabilizing chain

International Nuclear Information System (INIS)

Svinin, Andrei K.

2011-01-01

We observe that Dickey's stabilizing chain can be naturally included into two-dimensional chain of infinitely many copies of equations of KP hierarchy. -- Highlights: → In this study we consider Dickey's stabilizing chain. → We construct two-dimensional chain of dressing truncated operators. → We show that Dickey's stabilizing chain can be included into two-dimensional chain of KP hierarchies.

Method of identification of unbranched chain reaction with cross termination of chain

International Nuclear Information System (INIS)

Poluehktov, V.A.; Begishev, I.R.

1977-01-01

Gas-phase chlorination of unsymmetrical difluoroethane initiated by gamma quanta of Co 60 has been studied. At decreased temperatures the only hydrogen is replaced by a chlorine atom. Over a wide range of ratios of the initial reagents, the reaction occurs with a chain rupture. An analysis of the kinetics of such a reaction provides a method for identification of an unbranched chain reaction with a cross-rupture of the chain

Risikobasiertes Supply-Chain-Management

DEFF Research Database (Denmark)

Wieland, Andreas; Schinz, Philipp

2015-01-01

Das Management erlebt seit einigen Jahren dahingehend einen Paradigmenwechsel, dass nicht mehr Unternehmen als einzelne autonome Einheiten im Wettbewerb zueinander stehen, sondern die Supply Chains, in denen diese Unternehmen eingebunden sind. Ursachen hierfür sind beispielsweise die Auslagerung...... von Nicht-Kernprozessen auf vorgelagerte Stufen der Supply Chain oder auf Supply-Chain-Dienstleister sowie die Internationalisierung der Beschaffung. Dieser Paradigmenwechsel hat traditionelles Denken in den Schranken des Systems „Unternehmen“ abgelöst und zum Supply- Chain-Denken geführt, das vor......- und nachgelagerte Stufen des Systems „End-to-End-Supply-Chain“ einbezieht, etwa auch die Lieferanten von Lieferanten....

Concurrent Product & Supply Chain Creation

DEFF Research Database (Denmark)

Gubi, Ebbe

it is a structural premise. We also know that logistics costs generally are estimated 15-20% of total product costs. Accordingly, it stands to reason that a company can reduce costs, and thereby gain an edge on its competitors, by tailoring the supply chain in question to an individual product or product family; i.......e. by creating Focused Supply Chains. At the same time, customer satisfaction can be increased. As a second means to achieving a better fit between product and supply chain, the firm can deploy Design for Logistics, the discipline of considering the supply chain during product creation. The thesis sets out...... and supply chains should be created concurrently and integrated. The concept of Concurrent Product & Supply Chain Creation is introduced, and the two main components Focused Supply Chains and Design For Logistics are explained and exemplified by use of Bang & Olufsen....

Risk Management in Biopharmaceutical Supply Chains

OpenAIRE

Ma, Yao

2011-01-01

Biopharmaceutical supply chains present considerable complexity issue for the formulation of optimal plans due to significant uncertainty in the supply chain. The primary goal of biopharmaceutical supply chain planning is to provide reliable supply to patients while coping with various supply chain risks. In chapter 1 first I discuss the key elements and basic characteristics of the biopharmaceutical supply chain . Then I present the major challenges in biopharmaceutical supply chain planning...

Halalan Toyyiban Supply Chain The New Insights in Sustainable Supply Chain Management

OpenAIRE

Omar, Emi Normalina; Jaafar, Harlina Suzana; Osman, Muhamad Rahimi; Nasruddin, Faisol

2013-01-01

Purpose: In today’s highly competitive world scenario, in order for logistics and supply chain firms to be successful, resilient and sustainable, halalan-toyyiban supply chain could be the new insight in assisting the firm. Hence, the purpose of this study is to provide a practical definition for developing an effective supply chain through halalan toyyiban processes and comparing the similarities and differences of the halal term. Design/methodology/approach: The analysis is develo...

The Tax-Efficient Supply Chain

DEFF Research Database (Denmark)

Webber, Stuart

2011-01-01

Many multinational enterprises are restructuring supply chains to reduce their cost structures. As trade barriers fall and communications technologies improve, it has become easier and more cost-effective to manage business operations across international borders. This has motivated businesses...... practitioners in France, South Africa, Switzerland, Mexico, Argentina, and the United States. Companies are restructuring their supply chains and simultaneously reducing their income tax obligations. This article demonstrates that MNEs should link income tax and supply chain considerations when restructuring...... their supply chains, and they should endeavor to maximize net income when doing so. This recommendation differs from the great majority of supply chain literature, which has generally recommended that businesses seek to minimize pretax costs. One of the most important activities for both supply chain and tax...

Mouse myeloma cells that make short immunoglobulin heavy chains: pleiotropic effects on glycosylation and chain assembly

OpenAIRE

1984-01-01

Two variants in immunoglobulin heavy chain production, derived from the MPC 11 mouse myeloma cell line, make short heavy (H) chains with identical precise deletions of the CH3 domain. The CH3 domain is expressed in the H chain mRNA from both variants. Although in vitro translation of this mRNA produces one H chain species, deleted heavy chains are secreted as heavy-light (HL) and H2L2 moieties in contrast to MPC 11, which secretes only H2L2 . The heavy chains of HL apparently contain more car...

Supply chain dynamics in healthcare services.

Science.gov (United States)

Samuel, Cherian; Gonapa, Kasiviswanadh; Chaudhary, P K; Mishra, Ananya

2010-01-01

The purpose of this paper is to analyse health service supply chain systems. A great deal of literature is available on supply chain management in finished goods inventory situations; however, little research exists on managing service capacity when finished goods inventories are absent. System dynamics models for a typical service-oriented supply chain such as healthcare processes are developed, wherein three service stages are presented sequentially. Just like supply chains with finished goods inventory, healthcare service supply chains also show dynamic behaviour. Comparing options, service reduction, and capacity adjustment delays showed that reducing capacity adjustment and service delays gives better results. The study is confined to health service-oriented supply chains. Further work includes extending the study to service-oriented supply chains with parallel processing, i.e. having more than one stage to perform a similar operation and also to study the behaviour in service-oriented supply chains that have re-entrant orders and applications. Specific case studies can also be developed to reveal factors relevant to particular service-oriented supply chains. The paper explains the bullwhip effect in healthcare service-oriented supply chains. Reducing stages and capacity adjustment are strategic options for service-oriented supply chains. The paper throws light on policy options for managing healthcare service-oriented supply chain dynamics.

Supply Chain Management

DEFF Research Database (Denmark)

Wieland, Andreas; Handfield, Robert B.

Supply chain management has made great strides in becoming a discipline with a standalone body of theories. As part of this evolution, researchers have sought to embed and integrate observed supply chain management phenomena into theoretical statements. In our review, we explore where we have been...

Value Chain Engineering

DEFF Research Database (Denmark)

Wæhrens, Brian Vejrum; Slepniov, Dmitrij

2015-01-01

This workbook is recommended for the attention of students of and managers in Danish small and medium sized enterprises (SMEs). Danish SMEs are currently facing a number of key challenges related to their position in global value chains. This book provides an insight into value chain management t...

Crystallisation and chain conformation of long chain n-alkanes

International Nuclear Information System (INIS)

Gorce, J.

2000-06-01

Hydrocarbon chains are a basic component in a number of systems as diverse as biological membranes, phospholipids and polymers. A better understanding of the physical properties of n-alkane chains should provide a better understanding of these more complex systems. With this aim, vibrational spectroscopy has been extensively used. This technique, sensitive to molecular details, is the only one able to both identify and quantify conformational disorder present in paraffinic systems. To achieve this, methyl deformations have been widely used as ''internal standards'' for the normalisation of peak areas. However, in the case of n-alkanes with short chain length, such as n-C 44 H 90 for example, the infrared spectra recorded at liquid nitrogen temperature and reported here show the sensitivity of these latter peaks to the various crystal structures formed. Indeed, the main frequencies of the symmetric methyl bending mode were found between 1384 cm -1 and 1368 cm -1 as a function of the crystal form. Changes in the frequency of the first order of the L.A.M. present in the Raman spectra were also observed. At higher temperatures, non all-trans conformers, inferred from different infrared bands present in the wagging mode region, were found to be essentially placed at the end of the n-alkane chains. At the monoclinic phase transition, the concentration of end-gauche conformers, proportional to the area of the infrared band at 1342 cm -1 , increases abruptly. On the contrary, in the spectra recorded at liquid nitrogen temperature no such band is observed. We also studied the degree of disorder in two purely monodisperse long chain n-alkanes, namely n-C 198 H 398 and n-C 246 H 494 . The chain conformation as well as the tilt angle of the chains from the crystal surfaces were determined by means of low frequency Raman spectroscopy and S.A.X.S. measurements on solution-crystallised samples. The increase in the number of end-gauche conformers which was expected to occur with

The effect of chain flexibility and chain mobility on radiation crosslinking reactions of polymers

International Nuclear Information System (INIS)

Sun Jiazhen

2003-01-01

Flexibility of polymer chains is an important factor to effects of radiation crosslinking of the polymer. Polymers with flexible chains are easier to be crosslinked, with lower dose of gelation, than polymers with more rigid chains. And it is known that most polymers with abnormal rigidity can be radiation-crosslinked only at high temperatures when the molecular chains get enough mobility. The flexibility of polymer chains also influences the relationship between degree of degradation and radiation dose. A chain flexibility factor β has been introduced to modify the Charlesby-Pinner equation of sol-fraction and radiation dose. The new relationship equation applies to a wider range of polymers in radiation crosslinking. Studies also show that for flexible polymers with lower T g and molecular internal rotating factor, mechanism of radiation crosslinking is mainly in H type, whereas for rigid polymers with higher T g and molecular internal rotating factor, mechanism of radiation crosslinking is mainly in T type

Phasic Triplet Markov Chains.

Science.gov (United States)

El Yazid Boudaren, Mohamed; Monfrini, Emmanuel; Pieczynski, Wojciech; Aïssani, Amar

2014-11-01

Hidden Markov chains have been shown to be inadequate for data modeling under some complex conditions. In this work, we address the problem of statistical modeling of phenomena involving two heterogeneous system states. Such phenomena may arise in biology or communications, among other fields. Namely, we consider that a sequence of meaningful words is to be searched within a whole observation that also contains arbitrary one-by-one symbols. Moreover, a word may be interrupted at some site to be carried on later. Applying plain hidden Markov chains to such data, while ignoring their specificity, yields unsatisfactory results. The Phasic triplet Markov chain, proposed in this paper, overcomes this difficulty by means of an auxiliary underlying process in accordance with the triplet Markov chains theory. Related Bayesian restoration techniques and parameters estimation procedures according to the new model are then described. Finally, to assess the performance of the proposed model against the conventional hidden Markov chain model, experiments are conducted on synthetic and real data.

Critical Chain Exercises

Science.gov (United States)

Doyle, John Kevin

2010-01-01

Critical Chains project management focuses on holding buffers at the project level vs. task level, and managing buffers as a project resource. A number of studies have shown that Critical Chain project management can significantly improve organizational schedule fidelity (i.e., improve the proportion of projects delivered on time) and reduce…

Nodal-chain metals.

Science.gov (United States)

Bzdušek, Tomáš; Wu, QuanSheng; Rüegg, Andreas; Sigrist, Manfred; Soluyanov, Alexey A

2016-10-06

The band theory of solids is arguably the most successful theory of condensed-matter physics, providing a description of the electronic energy levels in various materials. Electronic wavefunctions obtained from the band theory enable a topological characterization of metals for which the electronic spectrum may host robust, topologically protected, fermionic quasiparticles. Many of these quasiparticles are analogues of the elementary particles of the Standard Model, but others do not have a counterpart in relativistic high-energy theories. A complete list of possible quasiparticles in solids is lacking, even in the non-interacting case. Here we describe the possible existence of a hitherto unrecognized type of fermionic excitation in metals. This excitation forms a nodal chain-a chain of connected loops in momentum space-along which conduction and valence bands touch. We prove that the nodal chain is topologically distinct from previously reported excitations. We discuss the symmetry requirements for the appearance of this excitation and predict that it is realized in an existing material, iridium tetrafluoride (IrF 4 ), as well as in other compounds of this class of materials. Using IrF 4 as an example, we provide a discussion of the topological surface states associated with the nodal chain. We argue that the presence of the nodal-chain fermions will result in anomalous magnetotransport properties, distinct from those of materials exhibiting previously known excitations.

Innovation Across the Supply Chain

DEFF Research Database (Denmark)

Druehl, Cheryl; Carrillo, Janice; Hsuan, Juliana

Innovation is an integral part of every firm’s ongoing operations. Beyond product innovation, supply chain innovations offer a unique source of competitive advantage. We synthesize recent research on innovation in the supply chain, specifically, innovative supply chain processes...

Adjustable chain trees for proteins

DEFF Research Database (Denmark)

Winter, Pawel; Fonseca, Rasmus

2012-01-01

A chain tree is a data structure for changing protein conformations. It enables very fast detection of clashes and free energy potential calculations. A modified version of chain trees that adjust themselves to the changing conformations of folding proteins is introduced. This results in much...... tighter bounding volume hierarchies and therefore fewer intersection checks. Computational results indicate that the efficiency of the adjustable chain trees is significantly improved compared to the traditional chain trees....

Teaching Lean Six Sigma within a Supply Chain Context: The Airplane Supply Chain Simulation

Science.gov (United States)

Ellis, Scott C.; Goldsby, Thomas J.; Bailey, Ana M.; Oh, Jae-Young

2014-01-01

Lean six sigma is a management methodology that firms can employ to achieve substantial improvement in supply chain performance. However, few pedagogical exercises facilitate students' use of a comprehensive set of lean six sigma principles within a supply chain context. We describe the Airplane Supply Chain Simulation that helps students…

The influence of power in supply chain innovation; a case-study of the Dutch wheat chain

NARCIS (Netherlands)

Pol, Hanneke; Visscher, Klaasjan

2010-01-01

The purpose of this article is to clarify the relation between the power structure of a supply chain and the possibilities to realize supply chain innovations. In an in-depth case study of the faltering start of an innovation trajectory in the Dutch wheat supply chain, we show that supply chain

Risk Management in Logystics Chains

OpenAIRE

Butrin, Andrey; Vikulov, Vladimir

2013-01-01

Article is devoted to risk management of supply chain. The authors considered indicators of supply chain risks, including risks caused by supplier. Authors formed a method of optimizing the level of supply chain risk in the integration with suppliers and customers.

Supply chain strategies, issues and models

CERN Document Server

Ramanathan, Ramakrishnan

2014-01-01

In the 21st century, supply chain operations and relationships among supply chain partners have become highly challenging, necessitating new approaches, e.g., the development of new models. Supply Chain Strategies, Issues and Models discusses supply chain issues and models with examples from actual industrial cases. Expert authors with a wide spectrum of knowledge working in various areas of supply chain management from various geographical locations offer refreshing, novel and insightful ideas and address possible solutions using established theories and models. Supply Chain Strategies, Issues and Models features studies that have used mathematical modeling, statistical analyses and also descriptive qualitative studies. The chapters cover many relevant themes related to supply chains and logistics including supply chain complexity, information sharing, quality (six sigma), electronic Kanbans, inventory models, scheduling, purchasing and contracts. To facilitate easy reading, the chapters that deal with suppl...

Management Accounting and Supply Chain Strategy

OpenAIRE

Hald, Kim S.; Thrane, Sof

2016-01-01

Research positioned in the intersection between management accounting and supply chain management is increasing. However, the relationship between management accounting and supply chain strategies has been neglected in extant research. This research adds to literature on management accounting and supply chain management through exploring how supply chain strategy and management accounting is related, and how supply chain relationship structure modifies this relation. Building on a contingency...

Supply Chain Management In Construction Revealed

OpenAIRE

Dr. Ghaith Al-Werikat

2017-01-01

The construction supply chain plays a major role in the construction market competition. Construction supply chain management assists enterprises by helping to improve competitiveness increase profits and have more control over the different factors and variables within the project. This paper discusses the construction supply chain characteristics challenges and problems supply chains encounter and the benefits of an integrated supply chain in the construction sector.

Non-stationary Markov chains

OpenAIRE

Mallak, Saed

1996-01-01

Ankara : Department of Mathematics and Institute of Engineering and Sciences of Bilkent University, 1996. Thesis (Master's) -- Bilkent University, 1996. Includes bibliographical references leaves leaf 29 In thi.s work, we studierl the Ergodicilv of Non-Stationary .Markov chains. We gave several e.xainples with different cases. We proved that given a sec[uence of Markov chains such that the limit of this sec|uence is an Ergodic Markov chain, then the limit of the combination ...

Economy, market and chain

OpenAIRE

Sukkel, W.; Hommes, M.

2009-01-01

In their pursuit of growth and professionalisation, the Dutch organic sector focuses primarily on market development. But how do you stimulate the market for organic foods? This is the subject of many research projects concerning market, consumer preferences and the supply chain. These projects focus specifically at consumer purchasing behaviour, product development, supply chain formation and minimising cost price. As a rule, this research takes place in close cooperation with chain actors

Understanding the supply chain

Directory of Open Access Journals (Sweden)

Aćimović Slobodan

2006-01-01

Full Text Available Supply chain management represents new business philosophy and includes strategically positioned and much wider scope of activity in comparison with its "older brother" - management of logistics. Philosophy of the concept of supply chain is directed to more coordination of key business functions of every link in distribution chain in the process of organization of the flow of both goods and information, while logistic managing instruments are focused on internal optimum of flows of goods and information within one company. Applying the concept of integrated supply chain among several companies makes the importance of operative logistics activity even greater on the level of one company, thus advancing processes of optimum and coordination within and between different companies and confirms the importance of logistics performances for the company’s profitability. Besides the fact that the borders between companies are being deleted, this concept of supply chain in one distribution channel influences increasing of importance of functional, i.e. traditional business managing approaches but instead it points out the importance of process managing approaches. Although the author is aware that "there is nothing harder, more dangerous and with uncertain success, but to find a way for introducing some novelties (Machiavelli, it would be even his additional stimulation for trying to bring closer the concept and goals of supply chain implementation that are identified in key, relevant, modern, theoretical and consulting approaches in order to achieve better understanding of the subject and faster implementation of the concept of supply chain management by domestic companies.

Dependence of the product chain-length on detergents for long-chain E-polyprenyl diphosphate synthases

Science.gov (United States)

Pan, Jian-Jung; Ramamoorthy, Gurusankar; Poulter, C. Dale

2013-01-01

Long-chain E-polyprenyl diphosphate synthases (E-PDS) catalyze repetitive addition of isopentenyl diphosphate (IPP) to the growing prenyl chain of an allylic diphosphate. The polyprenyl diphosphate products are required for the biosynthesis of ubiquinones and menaquinones required for electron transport during oxidative phosphorylation to generate ATP. In vitro, the long-chain PDSs require addition of phospholipids or detergents to the assay buffer to enhance product release and maintain efficient turnover. During preliminary assays of product chain-length with anionic, zwitterionic, and non-ionic detergents, we discovered considerable variability. Examination of a series of non-ionic PEG detergents with several long-chain E-PDSs from different organisms revealed that in vitro incubations with nonaethylene glycol monododecyl ether or Triton X-100 typically gave chain lengths that corresponded to those of the isoprenoid moieties in respiratory quinones synthesized in vivo. In contrast incubations in buffer with n-butanol, CHAPS, DMSO, n-octyl-β-glucopyranoside, or β-cyclodextrin or in buffer without detergent typically proceeded more slowly and gave a broad range of chain lengths. PMID:23802587

A micropower miniature piezoelectric actuator for implantable middle ear hearing device.

Science.gov (United States)

Wang, Zhigang; Mills, Robert; Luo, Hongyan; Zheng, Xiaolin; Hou, Wensheng; Wang, Lijun; Brown, Stuart I; Cuschieri, Alfred

2011-02-01

This paper describes the design and development of a small actuator using a miniature piezoelectric stack and a flextensional mechanical amplification structure for an implantable middle ear hearing device (IMEHD). A finite-element method was used in the actuator design. Actuator vibration displacement was measured using a laser vibrometer. Preliminary evaluation of the actuator for an IMEHD was conducted using a temporal bone model. Initial results from one temporal bone study indicated that the actuator was small enough to be implanted within the middle ear cavity, and sufficient stapes displacement can be generated for patients with mild to moderate hearing losses, especially at higher frequency range, by the actuator suspended onto the stapes. There was an insignificant mass-loading effect on normal sound transmission (actuator was attached to the stapes and switched off. Improved vibration performance is predicted by more firm attachment. The actuator power consumption and its generated equivalent sound pressure level are also discussed. In conclusion, the actuator has advantages of small size, lightweight, and micropower consumption for potential use as IMHEDs.

Advances in single chain technology.

Science.gov (United States)

Gonzalez-Burgos, Marina; Latorre-Sanchez, Alejandro; Pomposo, José A

2015-10-07

The recent ability to manipulate and visualize single atoms at atomic level has given rise to modern bottom-up nanotechnology. Similar exquisite degree of control at the individual polymeric chain level for producing functional soft nanoentities is expected to become a reality in the next few years through the full development of so-called "single chain technology". Ultra-small unimolecular soft nano-objects endowed with useful, autonomous and smart functions are the expected, long-term valuable output of single chain technology. This review covers the recent advances in single chain technology for the construction of soft nano-objects via chain compaction, with an emphasis in dynamic, letter-shaped and compositionally unsymmetrical single rings, complex multi-ring systems, single chain nanoparticles, tadpoles, dumbbells and hairpins, as well as the potential end-use applications of individual soft nano-objects endowed with useful functions in catalysis, sensing, drug delivery and other uses.

Tunnel current across linear homocatenated germanium chains

International Nuclear Information System (INIS)

Matsuura, Yukihito

2014-01-01

The electronic transport properties of germanium oligomers catenating into linear chains (linear Ge chains) have been theoretically studied using first principle methods. The conduction mechanism of a Ge chain sandwiched between gold electrodes was analyzed based on the density of states and the eigenstates of the molecule in a two-probe environment. Like that of silicon chains (Si chains), the highest occupied molecular orbital of Ge chains contains the extended σ-conjugation of Ge 4p orbitals at energy levels close to the Fermi level; this is in contrast to the electronic properties of linear carbon chains. Furthermore, the conductance of a Ge chain is expected to decrease exponentially with molecular length L. The decay constant β, which is defined as e −βL , of a Ge chain is similar to that of a Si chain, whereas the conductance of the Ge chains is higher than that of Si chains even though the Ge–Ge bond length is longer than the Si–Si bond length

Supply Chain Management In Construction Revealed

Directory of Open Access Journals (Sweden)

Dr. Ghaith Al-Werikat

2017-03-01

Full Text Available The construction supply chain plays a major role in the construction market competition. Construction supply chain management assists enterprises by helping to improve competitiveness increase profits and have more control over the different factors and variables within the project. This paper discusses the construction supply chain characteristics challenges and problems supply chains encounter and the benefits of an integrated supply chain in the construction sector.

Managing the Global Supply Chain

DEFF Research Database (Denmark)

Skjøtt-Larsen, Tage; Schary, Philip B.; Mikkola, Juliana Hsuan

The world today faces global competition. The supply chain is vital part of the globalization process. Presenting a global view of the scope and complexity of supply chain management, this book reflects the rapid change that has taken place within the supply chain and its environment. This new...... edition has been fully updated with recent changes in concepts, technology and practice. Integration and collaboration are keywords in future competition. Firms must be agile and lean at the same time. The book gives an insightful overview of the conceptual foundations of the global supply chain, as...... well as current examples of best practice of managing supply chains in a global context....

Managing the Global Supply Chain

DEFF Research Database (Denmark)

Hsuan, Juliana; Skjøtt-Larsen, Tage; Kinra, Aseem

The world today faces global competition. The supply chain is vital part of the globalization process. Presenting a global view of the scope and complexity of supply chain management, this book reflects the rapid change that has taken place within the supply chain and its environment. This new...... well as current examples of best practice of managing supply chains in a global context....... edition has been fully updated with recent changes in concepts, technology and practice. Integration and collaboration are keywords in future competition. Firms must be agile and lean at the same time. The book gives an insightful overview of the conceptual foundations of the global supply chain, as...

Designing structural supply chain flexibility

NARCIS (Netherlands)

Mulinski, Ksawery Jan

2012-01-01

In a continuously changing business environment the role of supply chain flexibility is constantly increasing. A flexible supply chain can ensure survival in quickly changing market conditions as well as enable sustainable growth. This thesis explores the topic of supply chain flexibility with focus

Determining X-chains in graph states

International Nuclear Information System (INIS)

Wu, Jun-Yi; Kampermann, Hermann; Bruß, Dagmar

2016-01-01

The representation of graph states in the X-basis as well as the calculation of graph state overlaps can efficiently be performed by using the concept of X-chains (Wu et al 2015 Phys. Rev. A 92 012322). We present a necessary and sufficient criterion for X-chains and show that they can efficiently be determined by the Bareiss algorithm. An analytical approach for searching X-chain groups of a graph state is proposed. Furthermore we generalize the concept of X-chains to so-called Euler chains, whose induced subgraphs are Eulerian. This approach helps to determine if a given vertex set is an X-chain and we show how Euler chains can be used in the construction of multipartite Bell inequalities for graph states. (paper)

Enzymatic hydrolysis of short-chain lecithin/long-chain phospholipid unilamellar vesicles: sensitivity of phospholipases to matrix phase state.

Science.gov (United States)

Gabriel, N E; Agman, N V; Roberts, M F

1987-11-17

Short-chain lecithin/long-chain phospholipid unilamellar vesicles (SLUVs), unlike pure long-chain lecithin vesicles, are excellent substrates for water-soluble phospholipases. Hemolysis assays show that greater than 99.5% of the short-chain lecithin is partitioned in the bilayer. In these binary component vesicles, the short-chain species is the preferred substrate, while the long-chain phospholipid can be treated as an inhibitor (phospholipase C) or poor substrate (phospholipase A2). For phospholipase C Bacillus cereus, apparent Km and Vmax values show that bilayer-solubilized diheptanoylphosphatidylcholine (diheptanoyl-PC) is nearly as good a substrate as pure micellar diheptanoyl-PC, although the extent of short-chain lecithin hydrolysis depends on the phase state of the long-chain lipid. For phospholipase A2 Naja naja naja, both Km and Vmax values show a greater range: in a gel-state matrix, diheptanoyl-PC is hydrolyzed with micellelike kinetic parameters; in a liquid-crystalline matrix, the short-chain lecithin becomes comparable to the long-chain component. Both enzymes also show an anomalous increase in specific activity toward diheptanoyl-PC around the phase transition temperature of the long-chain phospholipid. Since the short-chain lecithin does not exhibit a phase transition, this must reflect fluctuations in head-group area or vertical motions of the short-chain lecithin caused by surrounding long-chain lecithin molecules. These results are discussed in terms of a specific model for SLUV hydrolysis and a general explanation for the "interfacial activation" observed with water-soluble phospholipases.

Linking Supply Chain Governance and Biosecurity in the Context of HPAI Control in Western Java: A Value Chain Perspective

Directory of Open Access Journals (Sweden)

Dikky Indrawan

2018-05-01

Full Text Available Despite extensive efforts to control the highly pathogenic avian influenza (HPAI, it remains endemic in Western Java, Indonesia. To understand the limited effectiveness of HPAI control measures, it is important to map the complex structure of the poultry sector. The governance of the poultry value chain in particular, could play a pivotal role, yet there is limited information on the different chain governance structures and their impacts on HPAI control. This article uses value chain analysis (VCA, focusing on an in-depth assessment of governance structures as well as transaction cost economics and quantitative estimates of the market power of different chain actors, to establish a theoretical framework to examine biosecurity and HPAI control in the Western Java poultry chain. During the research, semi-structured interviews were conducted with key value-chain stakeholders, and the economic performance of identified actors was estimated. Results indicated the co-existence of four different poultry value chains in West Java: the integrator chain, the semi-automated slaughterhouse chain, the controlled slaughter-point chain, and the private slaughter-point chain. The integrator chain was characterized by the highest levels of coordination and a tight, hierarchical governance. In contrast, the other three types of value chains were less coordinated. The market power of the different actors within the four value chains also differed. In more integrated chains, slaughterhouses held considerable market power, while in more informal value chains, market power was in the hands of traders. The economic effects of HPAI and biosecurity measures also varied for the identified actors in the different value chains. Implementation of biosecurity and HPAI control measures was strongly related to the governance structure of the chain, with interactions between different chains and governance structures accentuating the risk of HPAI. Our findings highlight that a

Linking Supply Chain Governance and Biosecurity in the Context of HPAI Control in Western Java: A Value Chain Perspective

Science.gov (United States)

Indrawan, Dikky; Rich, Karl M.; van Horne, Peter; Daryanto, Arief; Hogeveen, Henk

2018-01-01

Despite extensive efforts to control the highly pathogenic avian influenza (HPAI), it remains endemic in Western Java, Indonesia. To understand the limited effectiveness of HPAI control measures, it is important to map the complex structure of the poultry sector. The governance of the poultry value chain in particular, could play a pivotal role, yet there is limited information on the different chain governance structures and their impacts on HPAI control. This article uses value chain analysis (VCA), focusing on an in-depth assessment of governance structures as well as transaction cost economics and quantitative estimates of the market power of different chain actors, to establish a theoretical framework to examine biosecurity and HPAI control in the Western Java poultry chain. During the research, semi-structured interviews were conducted with key value-chain stakeholders, and the economic performance of identified actors was estimated. Results indicated the co-existence of four different poultry value chains in West Java: the integrator chain, the semi-automated slaughterhouse chain, the controlled slaughter-point chain, and the private slaughter-point chain. The integrator chain was characterized by the highest levels of coordination and a tight, hierarchical governance. In contrast, the other three types of value chains were less coordinated. The market power of the different actors within the four value chains also differed. In more integrated chains, slaughterhouses held considerable market power, while in more informal value chains, market power was in the hands of traders. The economic effects of HPAI and biosecurity measures also varied for the identified actors in the different value chains. Implementation of biosecurity and HPAI control measures was strongly related to the governance structure of the chain, with interactions between different chains and governance structures accentuating the risk of HPAI. Our findings highlight that a proper

Linking Supply Chain Governance and Biosecurity in the Context of HPAI Control in Western Java: A Value Chain Perspective.

Science.gov (United States)

Indrawan, Dikky; Rich, Karl M; van Horne, Peter; Daryanto, Arief; Hogeveen, Henk

2018-01-01

Despite extensive efforts to control the highly pathogenic avian influenza (HPAI), it remains endemic in Western Java, Indonesia. To understand the limited effectiveness of HPAI control measures, it is important to map the complex structure of the poultry sector. The governance of the poultry value chain in particular, could play a pivotal role, yet there is limited information on the different chain governance structures and their impacts on HPAI control. This article uses value chain analysis (VCA), focusing on an in-depth assessment of governance structures as well as transaction cost economics and quantitative estimates of the market power of different chain actors, to establish a theoretical framework to examine biosecurity and HPAI control in the Western Java poultry chain. During the research, semi-structured interviews were conducted with key value-chain stakeholders, and the economic performance of identified actors was estimated. Results indicated the co-existence of four different poultry value chains in West Java: the integrator chain, the semi-automated slaughterhouse chain, the controlled slaughter-point chain, and the private slaughter-point chain. The integrator chain was characterized by the highest levels of coordination and a tight, hierarchical governance. In contrast, the other three types of value chains were less coordinated. The market power of the different actors within the four value chains also differed. In more integrated chains, slaughterhouses held considerable market power, while in more informal value chains, market power was in the hands of traders. The economic effects of HPAI and biosecurity measures also varied for the identified actors in the different value chains. Implementation of biosecurity and HPAI control measures was strongly related to the governance structure of the chain, with interactions between different chains and governance structures accentuating the risk of HPAI. Our findings highlight that a proper

Flux through a Markov chain

International Nuclear Information System (INIS)

Floriani, Elena; Lima, Ricardo; Ourrad, Ouerdia; Spinelli, Lionel

2016-01-01

Highlights: • The flux through a Markov chain of a conserved quantity (mass) is studied. • Mass is supplied by an external source and ends in the absorbing states of the chain. • Meaningful for modeling open systems whose dynamics has a Markov property. • The analytical expression of mass distribution is given for a constant source. • The expression of mass distribution is given for periodic or random sources. - Abstract: In this paper we study the flux through a finite Markov chain of a quantity, that we will call mass, which moves through the states of the chain according to the Markov transition probabilities. Mass is supplied by an external source and accumulates in the absorbing states of the chain. We believe that studying how this conserved quantity evolves through the transient (non-absorbing) states of the chain could be useful for the modelization of open systems whose dynamics has a Markov property.

Coordinated supply chain dynamic production planning model

Science.gov (United States)

Chandra, Charu; Grabis, Janis

2001-10-01

Coordination of different and often contradicting interests of individual supply chain members is one of the important issues in supply chain management because the individual members can not succeed without success of the supply chain and vice versa. This paper investigates a supply chain dynamic production planning problem with emphasis on coordination. A planning problem is formally described using a supply chain kernel, which defines supply chain configuration, management policies, available resources and objectives both at supply chain or macro and supply chain member or micro levels. The coordinated model is solved in order to balance decisions made at the macro and micro levels and members' profitability is used as the coordination criterion. The coordinated model is used to determine inventory levels and production capacity across the supply chain. Application of the coordinated model distributes costs burden uniformly among supply chain members and preserves overall efficiency of the supply chain. Influence of the demand series uncertainty is investigated. The production planning model is a part of the integrated supply chain decision modeling system, which is shared among the supply chain members across the Internet.

Position Paper on Intelligent Supply Chains

DEFF Research Database (Denmark)

Møller, Charles

This paper is intended to present and to analyze the concept of the Intelligent Supply Chain (ISC). The purpose of the paper is to: 1) Clarify the concept of the intelligent supply chain; 2) Identify emerging research opportunities; and 3) Specify a research engagement model for further explorati...... of intelligent supply chains. It is concluded that information management is critical to intelligent supply chains and a research agenda is outlined.......This paper is intended to present and to analyze the concept of the Intelligent Supply Chain (ISC). The purpose of the paper is to: 1) Clarify the concept of the intelligent supply chain; 2) Identify emerging research opportunities; and 3) Specify a research engagement model for further exploration...... the concept of Intelligent Supply Chain and to establish an overall perspective based on information management. The claim made here is that the notion of the intelligent enterprise contributes with a new perspective on supply chain management that addresses the current challenges in an industrial supply...

SUPPLY CHAIN MANAGEMENT – KEY FACTORS

Directory of Open Access Journals (Sweden)

Magdalena Daniela DINU

2014-06-01

Full Text Available This paper exposes Supply Chain Management by its key factors. Briefly, where the Supply Chain Management is treated as strategic part of a company then maintaining both control and influence throughout the entire supply chain are key factors and critical to success. On the other hand, finding the right partner to manage the non-strategic Supply Chains would be another key factor too. To define the most important key factors within Supply Chain Management means a deeply understanding of both Supply Chain’ s components, procedures, workflow, processes and the importance of Supply Chain Management into maximizing company's value. SCORE model able to provide solid information about measuring performance and identifying priorities within Supply Chain Management will help us to understand the key factors by analyzing its elements: Plan, Source, Make, Deliver,Return, Enable. These elements covers all the challenging areas from first to third tier of Supply Chain Management.

Middle ear bones of a mid-gestation ruminant foetus extracted from x-ray computed tomography

Science.gov (United States)

Costeur, Loic; Mennecart, Bastien; Müller, Bert; Schulz, Georg

2016-10-01

The timing of ossification of middle ear ossicles has been extensively studied in humans. This is an exception since it is vastly unknown in the +5000 extant species of placentals. As a preliminary approach, a cow foetus (around 115 days of gestation) was visualized using X-ray microtomography (μCT) and the ossicles including stapes, incus, and malleus could be extracted from the data set. All three bones have already undergone substantial ossification, which allow comparison to adult middle ear bones. Their ossification at this stage parallels ossification in humans at a comparable stage of gestation. While full ossification is not yet achieved almost all the morphological characters of the ossicles are observed. Bone tissue is still very porous, the stapes does not have the characteristic plate-like footplate, the lenticular process of the incus is missing and the manubrium of the malleus is very thin and not yet complete. Despite all this, the ossicles are articulate with each other and perfectly with the bony labyrinth. The stapes footplate is positioned on the oval window but is smaller than the latter while it should perfectly fit to transmit sound vibrations to the cochlea. All ossicles, especially the stapes, have not yet reached adult size, while the bony labyrinth already has. This is the first detailed description of a set of middle ear bones in a placental at mid-gestation based on high-resolution μCT. Similarities in ossification timing with humans encourage more work to be done on foetuses to understand if a general rule for placental mammals exists.

Process Algebra and Markov Chains

NARCIS (Netherlands)

Brinksma, Hendrik; Hermanns, H.; Brinksma, Hendrik; Hermanns, H.; Katoen, Joost P.

This paper surveys and relates the basic concepts of process algebra and the modelling of continuous time Markov chains. It provides basic introductions to both fields, where we also study the Markov chains from an algebraic perspective, viz. that of Markov chain algebra. We then proceed to study

Process algebra and Markov chains

NARCIS (Netherlands)

Brinksma, E.; Hermanns, H.; Brinksma, E.; Hermanns, H.; Katoen, J.P.

2001-01-01

This paper surveys and relates the basic concepts of process algebra and the modelling of continuous time Markov chains. It provides basic introductions to both fields, where we also study the Markov chains from an algebraic perspective, viz. that of Markov chain algebra. We then proceed to study

Estapedotomia totalmente endoscópica: técnica e resultados preliminares Fully endoscopic stapes surgery (stapedotomy: technique and preliminary results

Directory of Open Access Journals (Sweden)

João Flávio Nogueira Júnior

2011-12-01

visualization of important structures. b To show initial results, discuss possible advantages and disadvantages of this instrument. METHODS: 15 patients with otosclerosis were selected to undergo stapedotomies in 2010. The data and surgery videos were analyzed retrospectively (study case series. The anatomical conditions of the oval window niche and surgical steps were described and used to assess possible benefits of such procedures. RESULTS: The surgeries were performed with endoscopes only and all relevant anatomical structures were visualized without difficulty. No complications were observed and 14 of the 15 patients reported improvement of their hearing, confirmed by postoperative audiological tests. CONCLUSION: Totally endoscopic stapes surgeries are technically feasible, safe and promising. In this small series, the main advantages were: virtually no trauma to the chorda tympani nerve and excellent vision. The disadvantages were the lack of stereoscopic vision, having to work with one hand only and the learning curve.

Loads applied to fixations for chain stretching

Energy Technology Data Exchange (ETDEWEB)

Ahrens, K; Brychta, P

1985-06-01

The chains of scraper chain conveyors must be pre-stretched during standstill in order to compensate the elongations occurring during operation. They require frequent retensiening in order to meet the varying operational requirements. During tensioning, the chains are fixed in a point in the top run by means of fixation elements. The authors present a method for calculating the retaining force needed in the fixations. There are three different initial conditions of the chain before trensioning: Tensionsfree chain, pretensioned chain (stressed chain), slack chain. In all three cases, it is important to find out whether or nor the tensioning drive reaches full speed. The method of calculation is illustrated by the example of a scraper chain conveyor; it enables the establishment of rules for tensioning without damaging the chain and is a good basis for the dimensioning of new types of fixation elements.

Chain Effects: The Impact of Academy Chains on Low Income Students

Science.gov (United States)

Hutchings, Merryn; Francis, Becky; De Vries, Robert

2014-01-01

The authors analysed school performance data to review how well disadvantaged pupils achieve in academy chains. They included chains only if they had at least three academies in 2013, and two sponsored secondary academies for the whole period from September 2010 to July 2013. This means that academies are included in our analysis only when there…

The Financial Supply Chain Management: a New Solution for Supply Chain Resilience

Directory of Open Access Journals (Sweden)

Virgil Popa

2013-02-01

Full Text Available In the present article, the author aims to find solutions to optimize the supply chain for the cash flow – a flow of products reversed from the physical one and the two-ways flow of information. In the last 15-20 years, academics and practitioners were oriented towards increasing the speed, cost reduction on supply chain material’s flow, oriented towards 3RP (3 Resource Planning logistics solutions and management solutions such as outsourcing or collaborative management. In terms of information flow, there has been a real revolution with the rise of the Internet and information technology standards introduced by the VICS (Voluntary Interindustry Commerce Standards, CSCMP (Council of Supply Chain Management Professionals, SCC (Supply Chain Council şi ECR Europe (Efficient Consumer Respons. The objective of this paper is to identify new ways of working together on supply chain financial flows. Methods used are the documentation in the literature and the practices of transnational companies under recession. Results refer to the identification of new solutions such as reverse factoring. A comparative analysis regarding the european and national regulations gets us to the conclusion that Romania is still tributary to traditional commercial credit. We propose that the Collaborative management, as a modus vivendi in a globalized and super computerized world, must be included within all Romanian organizations life, within the Supply Chain, but also those which are 3PL (Third Part Logistics and 4PL (Four Part Logistics organizations, where not only information services are included, but also financial services (banks and specialized financial institutions.

Synergy between the Multiple Supply Chain and Green Supply Chain Management (GSCM) approaches: an initial analysis aimed at fostering supply chain sustainability

OpenAIRE

Ana Lima de Carvalho; Livia Rodrigues Ignácio; Kleber Francisco Esposto; Aldo Roberto Ometto

2016-01-01

The concept of Green Supply Chain Management (GSCM) was created in the 90s to reduce the environmental impacts of productive systems. This approach seeks to improve the environmental performance of all the participants in a supply chain, from the extraction of raw materials to the use and final disposal of the product, through relationships of collaboration or conformity between the parties. The multiple supply chains approach established by Gattorna (2009) brought to light different supply c...

Supply Chain Visibility with Linked Open Data for Supply Chain Risk Analysis

NARCIS (Netherlands)

Hofman, W.J.

2011-01-01

Current customs applications are declaration based to support the various customs procedures based on (inter)national laws and regulations. To be able to perform a proper supply chain risk analysis, customs requires to have all data in supply chains. The current declaration procedures are not

SUPPLY CHAIN MANAGEMENT – KEY FACTORS

OpenAIRE

Magdalena Daniela DINU

2014-01-01

This paper exposes Supply Chain Management by its key factors. Briefly, where the Supply Chain Management is treated as strategic part of a company then maintaining both control and influence throughout the entire supply chain are key factors and critical to success. On the other hand, finding the right partner to manage the non-strategic Supply Chains would be another key factor too. To define the most important key factors within Supply Chain Management means a deeply understanding of bot...

Shark Ig light chain junctions are as diverse as in heavy chains.

Science.gov (United States)

Fleurant, Marshall; Changchien, Lily; Chen, Chin-Tung; Flajnik, Martin F; Hsu, Ellen

2004-11-01

We have characterized a small family of four genes encoding one of the three nurse shark Ig L chain isotypes, called NS5. All NS5 cDNA sequences are encoded by three loci, of which two are organized as conventional clusters, each consisting of a V and J gene segment that can recombine and one C region exon; the third contains a germline-joined VJ in-frame and the fourth locus is a pseudogene. This is the second nurse shark L chain type where both germline-joined and split V-J organizations have been found. Since there are only two rearranging Ig loci, it was possible for the first time to examine junctional diversity in defined fish Ig genes, comparing productive vs nonproductive rearrangements. N region addition was found to be considerably more extensive in length and in frequency than any other vertebrate L chain so far reported and rivals that in H chain. We put forth the speculation that the unprecedented efficiency of N region addition (87-93% of NS5 sequences) may be a result not only of simultaneous H and L chain rearrangement in the shark but also of processing events that afford greater accessibility of the V or J gene coding ends to terminal deoxynucleotidyltransferase.

An assessment of chain management practice within the industrial pork value chain: Beijing Ciity, China

NARCIS (Netherlands)

Wenzhao, M.

2008-01-01

The research assesses the value chain and quality control of the pork industry in Beijing municipality of China. Through interviewing all the actors of pork industrial value chain in Beijing, the roles functions and problems of each of the actor of the pork industrial value chain of Beijing were

A chain of FPU cells

NARCIS (Netherlands)

Verhulst, F.

2015-01-01

In contrast to the classical Fermi-Pasta-Ulam (FPU) chain, the inhomogeneous FPU chain shows nearly all the principal resonances. Using this fact, we can construct a periodic FPU chain of low dimension, for instance a FPU cell of four degrees-of-freedom, that can be used as a building block for a

Environmental Management in Product Chains

DEFF Research Database (Denmark)

Jørgensen, Michael Søgaard; Forman, Marianne

2009-01-01

between existing resources, norms and values and external pressures for environmental management (second section). A model for the types of corporate network relations that need to be mapped and understood in order to analyze and/or develop environmental management in a product chain (third section......The chapter aims at giving background to companies, consultants, governmental regulators, NGOs etc. for the analysis and planning of environmental management in specific product chains through: A framework for understanding environmental management in product chains as shaped by the interaction......). An overview of examples from our own research and from literature of the type and the role of environmental issues and initiatives in product chains (fourth section). A typology for characterizing corporate strategies as part of environmental management in product chains and characterizing those competencies...

Thermodynamics of Dipolar Chain Systems

International Nuclear Information System (INIS)

Armstrong, J.R.; Zinner, N.T.; Fedorov, D.V.; Jensen, A.S.

2013-01-01

The thermodynamics of a quantum system of layers containing perpendicularly oriented dipolar molecules is studied within an oscillator approximation for both bosonic and fermionic species. The system is assumed to be built from chains with one molecule in each layer. We consider the effects of the intralayer repulsion and quantum statistical requirements in systems with more than one chain. Specifically, we consider the case of two chains and solve the problem analytically within the harmonic Hamiltonian approach which is accurate for large dipole moments. The case of three chains is calculated numerically. Our findings indicate that thermodynamic observables, such as the heat capacity, can be used to probe the signatures of the intralayer interaction between chains. This should be relevant for near future experiments on polar molecules with strong dipole moments. (author)

A conceptual framework for supply chain governance: An application to agri-food chains in China

NARCIS (Netherlands)

Zhang, X.Y.; Aramyan, L.H.

2009-01-01

Purpose - Chinese agri-food chains consist of the millions of small scale farmers, who are not well structured and organized in the supply chain. Owing to market liberalization and globalization, one of the most challenging issues along agri-food chains in China is becoming the issue of how to link

Can We Defend the Defense Supply Chain Lessons Learned from Industry Leaders in Supply Chain Management

Science.gov (United States)

2018-03-01

Simpson, “Tim Cook: The ‘Cool Customer ’ Behind Apple’s Supply Chain Success,” Supply Management , January 18, 2016, https://www.cips.org/supply... management /analysis/2016/february/tim- cook-the-cool- customer -behind-apples-supply-chain-success/. 13 Kif Leswing, “Apples ‘Shreds” Old iPhones to Prevent...chain, including products, services, information, finances, demand, relationships , and risks. In a more complete definition, supply chain management

CHALLENGES OF SUPPLY CHAIN MANAGEMENT

Directory of Open Access Journals (Sweden)

Natalia GALANTON

2017-11-01

Full Text Available The present article highlights the basic characteristics of the supply chain, specific to changes in the business environment of companies at the beginning of the 21st century. Supply chain activities turn natural resources, raw materials and components into a finished product, which is then delivered to the final customer. The supply chain incorporates the production process alongside the raw material acquisition and distribution of finished products, encompassing all the existing process responsible for transforming the materials taken from the supplier to the finished products delivered to customers. Today, competitiveness and performance of an organization are dependent on belonging to an efficient and effective supply-delivery chain where synergies exist due to the establishment and implementation of common goals and strategies by partners. Competition does not take place between independent organizations or between small groups of organizations, but between supply and delivery chains, made up of interconnected networks of producers, distributors and logistics providers. Under these circumstances, supply chain managers must seek solutions to respond promptly to the most important challenges in the field.

MASTERING SUPPLY CHAIN RISKS

Directory of Open Access Journals (Sweden)

Borut Jereb

2012-11-01

Full Text Available Risks in supply chains represent one of the major business issues today. Since every organizationstrives for success and uninterrupted operations, efficient supply chain risk management is crucial.During supply chain risk research at the Faculty of Logistics in Maribor (Slovenia some keyissues in the field were identified, the major being the lack of instruments which can make riskmanagement in an organization easier and more efficient. Consequently, a model which captures anddescribes risks in an organization and its supply chain was developed. It is in accordance with thegeneral risk management and supply chain security standards, the ISO 31000 and ISO 28000families. It also incorporates recent finding from the risk management field, especially from theviewpoint of segmenting of the public.The model described in this paper focuses on the risks itself by defining them by different keydimensions, so that risk management is simplified and can be undertaken in every supply chain andorganizations within them. Based on our mode and consequent practical research in actualorganizations, a freely accessible risk catalog has been assembled and published online from the risksthat have been identified so far. This catalog can serve as a checklist and a starting point in supplychain risk management in organizations. It also incorporates experts from the field into a community,in order to assemble an ever growing list of possible risks and to provide insight into the model andits value in practice.

Phase behaviour of polyethylene knotted ring chains

International Nuclear Information System (INIS)

Wen Xiao-Hui; Xia A-Gen; Chen Hong-Ping; Zhang Lin-Xi

2011-01-01

The phase behaviour of polyethylene knotted ring chains is investigated by using molecular dynamics simulations. In this paper, we focus on the collapse of the polyethylene knotted ring chain, and also present the results of linear and ring chains for comparison. At high temperatures, a fully extensive knot structure is observed. The mean-square radius of gyration per bond (S 2 )/(Nb 2 ) and the shape factor (δ*) depend on not only the chain length but also the knot type. With temperature decreasing, chain collapse is observed, and the collapse temperature decreases with the chain length increasing. The actual collapse transition can be determined by the specific heat capacity C v , and the knotted ring chain undergoes gas—liquid—solid-like transition directly. The phase transition of a knotted ring chain is only one-stage collapse, which is different from the polyethylene linear and ring chains. This investigation can provide some insights into the statistical properties of knotted polymer chains. (condensed matter: structural, mechanical, and thermal properties)

Determining an optimal supply chain strategy

Directory of Open Access Journals (Sweden)

Intaher M. Ambe

2012-11-01

Full Text Available In today’s business environment, many companies want to become efficient and flexible, but have struggled, in part, because they have not been able to formulate optimal supply chain strategies. Often this is as a result of insufficient knowledge about the costs involved in maintaining supply chains and the impact of the supply chain on their operations. Hence, these companies find it difficult to manufacture at a competitive cost and respond quickly and reliably to market demand. Mismatched strategies are the root cause of the problems that plague supply chains, and supply-chain strategies based on a one-size-fits-all strategy often fail. The purpose of this article is to suggest instruments to determine an optimal supply chain strategy. This article, which is conceptual in nature, provides a review of current supply chain strategies and suggests a framework for determining an optimal strategy.

A Three Level Framework for Closed-Loop Supply Chain Management—Linking Society, Chain and Actor Level

Directory of Open Access Journals (Sweden)

Stefan Seuring

2011-04-01

Full Text Available Supply chain management and closed-loop supply chain management (CLSCM have developed into established concepts in recent years. The related material cycles and product returns form an important part of all related processes with high potential for reducing environmental burden. The paper proposes a framework for (environmentally triggered closed-loop supply chain management, spanning three different levels: the societal or governance, the chain and the actor level. Within each level, a set of activities or processes can be identified. Taken together, the levels allow a comprehensive analysis of a closed-loop supply chain system. This is illustrated building on two case studies in the textile and apparel industry, where closed-loop supply chains have been designed to take specific apparel products back. The case studies are analyzed against all three levels and allow exemplification of related challenges and interrelations among the three levels. The three levels contribute to the further comprehension of the multiple issues having to be taken into account for successfully implementing closed-loop supply chains.

Academic Education Chain Operation Model

OpenAIRE

Ruskov, Petko; Ruskov, Andrey

2007-01-01

This paper presents an approach for modelling the educational processes as a value added chain. It is an attempt to use a business approach to interpret and compile existing business and educational processes towards reference models and suggest an Academic Education Chain Operation Model. The model can be used to develop an Academic Chain Operation Reference Model.

Supply chain management for small business--how to avoid being part of the food chain.

Science.gov (United States)

Knechtges, J P; Watts, C A

2000-08-01

A supply chain is a series of customer and supplier relationships that extend throughout and beyond the company. It is an interwoven set of links that together form a chain supplying our customers in a seamless and integrated fashion delivering a high level of customer satisfaction. Supply chain management (SCM) integrates all activities so they are focused on customer satisfaction (both internally and externally). One of the things this article will attempt to accomplish is to provide a clear understanding of SCM's positive impact on customer service as well as on improving profitability, cash flow, product cycle times, and communication. Whether we go forward in the supply chain to the final end-user or backward in the supply chain to our supplier's suppliers, SCM will significantly improve our ability to serve our customers.

Sports Nutrition Food Industry Chain Development Research

OpenAIRE

Jie Yin

2015-01-01

Through the study of Henan sports nutrition food industry chain optimization, the study analyses development advantage and competitive advantage of Henan in sports nutrition food industry chain and existing problems and challenges in Henan sports nutrition food industry chain and at the same time introduces the theory of supply chain management to the development of sports nutrition food industry chain, clearly optimizes countermeasures of sports nutrition food industry chain. Pointing out sp...

The Governance of Global Wealth Chains

DEFF Research Database (Denmark)

Seabrooke, Leonard; Wigan, Duncan

) innovation capacities among suppliers of products used in wealth chains. We then differentiate five types of global value chain governance - market, modular, relational, captive, and hierarchy - which range from simple ‘off shelf’ products shielded from regulators by advantageous international tax laws...... to highly complex and flexible innovative financial products produced by large financial institutions and corporations. This paper highlights how Global Wealth Chains intersect with value chains and real economies, and provides three brief case studies on offshore shell companies, family property trusts......This working paper creates a theoretical framework to explain how Global Wealth Chains are created, maintained, and governed. We draw upon different strands of literature, including scholarship in international political economy and economic geography on Global Value Chains, literature on finance...

Are Local Food Chains More Sustainable than Global Food Chains? Considerations for Assessment

Directory of Open Access Journals (Sweden)

Gianluca Brunori

2016-05-01

Full Text Available This paper summarizes the main findings of the GLAMUR project which starts with an apparently simple question: is “local” more sustainable than “global”? Sustainability assessment is framed within a post-normal science perspective, advocating the integration of public deliberation and scientific research. The assessment spans 39 local, intermediate and global supply chain case studies across different commodities and countries. Assessment criteria cover environmental, economic, social, health and ethical sustainability dimensions. A closer view of the food system demonstrates a highly dynamic local–global continuum where actors, while adapting to a changing environment, establish multiple relations and animate several chain configurations. The evidence suggests caution when comparing “local” and “global” chains, especially when using the outcomes of the comparison in decision-making. Supply chains are analytical constructs that necessarily—and arbitrarily—are confined by system boundaries, isolating a set of elements from an interconnected whole. Even consolidated approaches, such as Life Cycle Assessment (LCA, assess only a part of sustainability attributes, and the interpretation may be controversial. Many sustainability attributes are not yet measurable and “hard” methodologies need to be complemented by “soft” methodologies which are at least able to identify critical issues and trade-offs. Aware of these limitations, our research shows that comparing local and global chains, with the necessary caution, can help overcome a priori positions that so far have characterized the debate between “localists” and “globalists”. At firm level, comparison between “local” and “global” chains could be useful to identify best practices, benchmarks, critical points, and errors to avoid. As sustainability is not a status to achieve, but a never-ending process, comparison and deliberation can be the basis of a �

The Governance of Global Wealth Chains

DEFF Research Database (Denmark)

Seabrooke, Leonard; Wigan, Duncan

2017-01-01

This article offers a theoretical framework to explain how Global Wealth Chains (GWCs) are created, maintained, and governed. We draw upon different strands of literature, including scholarship in International Political Economy and Economic Geography on Global Value Chains, literature on finance...... innovative financial products produced by large financial institutions and corporations. This article highlights how GWCs intersect with value chains, and provides brief case examples of wealth chains and how they interact.......This article offers a theoretical framework to explain how Global Wealth Chains (GWCs) are created, maintained, and governed. We draw upon different strands of literature, including scholarship in International Political Economy and Economic Geography on Global Value Chains, literature on finance...... capacities among suppliers of products used in wealth chains. We then differentiate five types of GWC governance – Market, Modular, Relational, Captive, and Hierarchy – which range from simple ‘off shelf’ products shielded from regulators by advantageous international tax laws to highly complex and flexible...

Symmetry chains for the atomic shell model. I. Classification of symmetry chains for atomic configurations

International Nuclear Information System (INIS)

Gruber, B.; Thomas, M.S.

1980-01-01

In this article the symmetry chains for the atomic shell model are classified in such a way that they lead from the group SU(4l+2) to its subgroup SOsub(J)(3). The atomic configurations (nl)sup(N) transform like irreducible representations of the group SU(4l+2), while SOsub(J)(3) corresponds to total angular momentum in SU(4l+2). The defining matrices for the various embeddings are given for each symmetry chain that is obtained. These matrices also define the projection onto the weight subspaces for the corresponding subsymmetries and thus relate the various quantum numbers and determine the branching of representations. It is shown in this article that three (interrelated) symmetry chains are obtained which correspond to L-S coupling, j-j coupling, and a seniority dependent coupling. Moreover, for l<=6 these chains are complete, i.e., there are no other chains but these. In articles to follow, the symmetry chains that lead from the group SO(8l+5) to SOsub(J)(3) will be discussed, with the entire atomic shell transforming like an irreducible representation of SO(8l+5). The transformation properties of the states of the atomic shell will be determined according to the various symmetry chains obtained. The symmetry lattice discussed in this article forms a sublattice of the larger symmetry lattice with SO(8l+5) as supergroup. Thus the transformation properties of the states of the atomic configurations, according to the various symmetry chains discussed in this article, will be obtained too. (author)

Tympanosclerosis of the middle ear: radiologic-surgical correlation

International Nuclear Information System (INIS)

Moon, Won Jin; Park, Dong Woo; Lee, Seung Ro; Seong, Jin Yong; Song, Soon Young; Hahm, Chang Kok; Kim, Yong Soo; Park, Choong Ki; Tae, Kyung

1998-01-01

Tympanosclerosis is a common problem causing conductive hearing loss accompanied by chronic otitis media. The purpose of this study was to evaluate the CT findings of tympanosclerosis, and correlate them with the surgical findings. The CT scans of 17 patients with surgically-proven tympanosclerosis and those of a control group of 34 patients with nontympanosclerotic chronic otitis media were reviewed. According to their location, they were assigned to one of three groups; tympanic membrane, epitympanum, or ossicles. Tympanosclerosis usually appears on CT as ossicular thickening, narrowing of the epitympanum, calcification of the tympanic membrane and/or tympanic cavity. CT is very helpful in evaluating ossicular involvement and determining the appropriate surgical treatment of tympanosclerosis. (author). 13 refs., 4 figs

Tympanosclerosis of the middle ear: radiologic-surgical correlation

Energy Technology Data Exchange (ETDEWEB)

Moon, Won Jin; Park, Dong Woo; Lee, Seung Ro; Seong, Jin Yong; Song, Soon Young; Hahm, Chang Kok; Kim, Yong Soo; Park, Choong Ki; Tae, Kyung [Hanyang Univ., Seoul (Korea, Republic of). Coll. of Medicine

1998-02-01

Tympanosclerosis is a common problem causing conductive hearing loss accompanied by chronic otitis media. The purpose of this study was to evaluate the CT findings of tympanosclerosis, and correlate them with the surgical findings. The CT scans of 17 patients with surgically-proven tympanosclerosis and those of a control group of 34 patients with nontympanosclerotic chronic otitis media were reviewed. According to their location, they were assigned to one of three groups; tympanic membrane, epitympanum, or ossicles. Tympanosclerosis usually appears on CT as ossicular thickening, narrowing of the epitympanum, calcification of the tympanic membrane and/or tympanic cavity. CT is very helpful in evaluating ossicular involvement and determining the appropriate surgical treatment of tympanosclerosis. (author). 13 refs., 4 figs.

The role of the supply chain executive in supply chain integration: a behavioral approach

OpenAIRE

ELENA REVILLA; LUIS GOMEZ - MEJIA

2008-01-01

Applying a behavioural approach of agency theory, this paper aimed to identify the most appropriate employment and compensation system (ECS) for supply chain executives in order to foster supply chain integration. We attempted to develop a novel approach of how encourages supply chain integration from the perspective of managerial incentives, an enabler that has not been analyzed in the literature. The paper presents the analysis of three sources of risk bearing - compensation risk, employmen...

Financing the End-to-end Supply Chain: A Reference Guide to Supply Chain Finance

OpenAIRE

Templar, Simon; Hofmann, Erik; Findlay, Charles

2016-01-01

Financing the End to End Supply Chain provides readers with a real insight into the increasingly important area of supply chain finance. It demonstrates the importance of the strategic relationship between the physical supply of goods and services and the associated financial flows. The book provides a clear introduction, demonstrating the importance of the strategic relationship between supply chain and financial communities within an organization. It contains vital information on how supply...

Supply chain design approaches for supply chain resilience: A qualitative study of South African fast-moving consumer goods grocery manufacturers

Directory of Open Access Journals (Sweden)

Assilah Agigi

2016-10-01

Full Text Available Orientation: In today’s globalised and complex business environment, firms are ever more vulnerable to supply chain disruptions, originating both internally and externally from the supply chain. Supply chain resilience minimises the impact of a disruption through design approaches, which allows the supply chain to respond appropriately to disruptive events. Research purpose: This article investigated the supply chain risks faced by grocery manufacturers in the South African fast-moving consumer goods (FMCG industry and explored supply chain design approaches that enable supply chain resilience. Motivation for the study: South African grocery manufacturers are faced with distinct risks. Whilst supply chain risk management studies have provided firms with certain guidelines to mitigate risk, supply chains are still vulnerable to unanticipated risks. Literature on supply chain resilience in the South African context is scant. The concept of supply chain resilience provides firms with strategies that are built into the supply chain that allow firms to react and recover swiftly from disruptions. Furthermore, supply chain resilience strategies assist firms in becoming less vulnerable to possible disruptions. Research design approach and method: This study was conducted by using a descriptive qualitative research design. Data were collected through semi-structured interviews with senior supply chain practitioners specifically within the South African FMCG grocery manufacturing industry. Main findings: The study found that labour unrest is the most common risk faced by the industry. Furthermore, strategic stock and supply chain mapping are of the most useful design approaches to enhance supply chain resilience. Practical/managerial implications: The study provides managers with new insights in guiding supply chain design decisions for resilient supply chains. Through the identification of risks and appropriate solutions linked to the various risks

Editorial: Supply Chain Management

Directory of Open Access Journals (Sweden)

Aidonis, D.

2012-01-01

Full Text Available This special issue has followed up the 2nd Olympus International Conference on Supply Chains held on October 5-6, 2012, in Katerini, Greece. The Conference was organized by the Department of Logistics of Alexander Technological Educational Institution (ATEI of Thessaloniki, in collaboration with the Laboratory of Quantitative Analysis, Logistics and Supply Chain Management of the Department of Mechanical Engineering, Aristotle University of Thessaloniki (AUTH. During the 2-Days Conference more than 50 research papers were presented covering the following thematic areas: (i Business Logistics, (ii Transportation, Telematics and Distribution Networks, (iii Green Logistics, (iv Information and Communication Technologies in Supply Chain Management, and (v Services and Quality. Three keynote invited speakers addressed interesting issues for the Humanitarian Logistics, Green Supply Chains of the Agrifood Sector and the Opportunities and Prospects of Greek Ports chaired Round Tables with other Greek and Foreign Scientists and Specialists.

Don't break the chain: importance of supply chain management in the operating room setting.

Science.gov (United States)

Bilyk, Candis

2008-09-01

Management of supplies within the operating room (OR) has considerable implications for decreasing healthcare costs while maintaining high-quality patient care. This area of healthcare therefore requires more monitoring by end-users including OR management, physicians, and nursing staff. This article is based on understanding supply chain management in the OR setting. Information provided throughout the article can be applied to small or large health care centers. It defines supply chain management and contains a brief overview of supply chain processes. It reviews the benefits of following these processes. The article also includes recommendations for improving the supply chain in the OR.

SAChES: Scalable Adaptive Chain-Ensemble Sampling.

Energy Technology Data Exchange (ETDEWEB)

Swiler, Laura Painton [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Ray, Jaideep [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Ebeida, Mohamed Salah [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Huang, Maoyi [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hou, Zhangshuan [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Bao, Jie [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Ren, Huiying [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2017-08-01

We present the development of a parallel Markov Chain Monte Carlo (MCMC) method called SAChES, Scalable Adaptive Chain-Ensemble Sampling. This capability is targed to Bayesian calibration of com- putationally expensive simulation models. SAChES involves a hybrid of two methods: Differential Evo- lution Monte Carlo followed by Adaptive Metropolis. Both methods involve parallel chains. Differential evolution allows one to explore high-dimensional parameter spaces using loosely coupled (i.e., largely asynchronous) chains. Loose coupling allows the use of large chain ensembles, with far more chains than the number of parameters to explore. This reduces per-chain sampling burden, enables high-dimensional inversions and the use of computationally expensive forward models. The large number of chains can also ameliorate the impact of silent-errors, which may affect only a few chains. The chain ensemble can also be sampled to provide an initial condition when an aberrant chain is re-spawned. Adaptive Metropolis takes the best points from the differential evolution and efficiently hones in on the poste- rior density. The multitude of chains in SAChES is leveraged to (1) enable efficient exploration of the parameter space; and (2) ensure robustness to silent errors which may be unavoidable in extreme-scale computational platforms of the future. This report outlines SAChES, describes four papers that are the result of the project, and discusses some additional results.

Demand chain management - The evolution

Directory of Open Access Journals (Sweden)

D Ericsson

2011-06-01

Full Text Available The concepts of Supply Chain Management (SCM and Demand Chain Management (DCM are among the new and debated topics concerning logistics in the literature. The question considered in this paper is: “Are these concepts needed or will they just add to the confusion?” Lasting business concepts have always evolved in close interaction between business and academia. Different approaches start out in business and they are then, more or less si- multaneously, aligned, integrated, systemised and structured in academia. In this way a terminology (or language is provided that helps in further diffusion of the concepts. There is a lack of consensus on the definition of the concept of SCM. This may be one of the major reasons for the difficulty in advancing the science and measuring the results of implementation in business. Relationships in SCM span from rather loose coalitions to highly structured virtual network integrations. DCM is a highly organised chain in which the key is mutual interdependence and partnership. The purpose is to create a distinctive competence for the chain as a whole that helps to identify and satisfy customer needs and wishes. The classical research concerning vertical marketing systems is very helpful in systemising the rather unstructured discussions in current SCM research. The trend lies in increasing competition between channels rather than between companies, which in turn leads to the creation of channels with a high degree of partnership and mutual interdependence between members. These types of channels are known as organised vertical marketing systems in the classic marketing channel research. The behaviour in these types of channels, as well as the formal and informal structures, roles in the network, power and dependence relations, etc. are well covered topics in the literature. The concept of vertical marketing systems lies behind the definition of demand chains and demand chain management proposed in this paper. A

"Bullwhip Effect" in Supply Chains

Directory of Open Access Journals (Sweden)

Anđelko Ščukanec

2007-09-01

Full Text Available The system which connects all the elements between theproducer and the consumer is called the supply chain. This definitionof the supply chain shows its complexity, dynamics anduncertainty. Successful operation of supply chains requires thebest possible coordination of its elements, which obviously indicatesthe utmost importance of the information flow alongthem. The operation of supply chains on the whole has to bemore successful than the operation of their individual elements.It should be noted that such a complex process may give rise toa series of problems, unwanted events, as well as substantial reductionin profits and the level of service. One of such unwantedphenomena which may occur in the supply chain is the"bullwhip effect". This is a possible increase in the diversity oforders which occurs when we move along the elements of thesupply chain (from the customers' orders to the producers' orders.The work analyses the processes within the supply chainsand the occurrence of the bullwhip effect. The main causes ofthe bullwhip effect that we encounter daily in the supply chainshave been clearly defined. The paper also presents the mainnegative consequences of such a disturbance within the supplychains, and provides possible solutions for avoiding the bullwhipeffect.

Replicator dynamics in value chains

DEFF Research Database (Denmark)

Cantner, Uwe; Savin, Ivan; Vannuccini, Simone

2016-01-01

The pure model of replicator dynamics though providing important insights in the evolution of markets has not found much of empirical support. This paper extends the model to the case of firms vertically integrated in value chains. We show that i) by taking value chains into account, the replicator...... dynamics may revert its effect. In these regressive developments of market selection, firms with low fitness expand because of being integrated with highly fit partners, and the other way around; ii) allowing partner's switching within a value chain illustrates that periods of instability in the early...... stage of industry life-cycle may be the result of an 'optimization' of partners within a value chain providing a novel and simple explanation to the evidence discussed by Mazzucato (1998); iii) there are distinct differences in the contribution to market selection between the layers of a value chain...

Developing sustainable food supply chains.

Science.gov (United States)

Smith, B Gail

2008-02-27

This paper reviews the opportunities available for food businesses to encourage consumers to eat healthier and more nutritious diets, to invest in more sustainable manufacturing and distribution systems and to develop procurement systems based on more sustainable forms of agriculture. The important factors in developing more sustainable supply chains are identified as the type of supply chain involved and the individual business attitude to extending responsibility for product quality into social and environmental performance within their own supply chains. Interpersonal trust and working to standards are both important to build more sustainable local and many conserved food supply chains, but inadequate to transform mainstream agriculture and raw material supplies to the manufactured and commodity food markets. Cooperation among food manufacturers, retailers, NGOs, governmental and farmers' organizations is vital in order to raise standards for some supply chains and to enable farmers to adopt more sustainable agricultural practices.

Primitive chain network simulations of probe rheology.

Science.gov (United States)

Masubuchi, Yuichi; Amamoto, Yoshifumi; Pandey, Ankita; Liu, Cheng-Yang

2017-09-27

Probe rheology experiments, in which the dynamics of a small amount of probe chains dissolved in immobile matrix chains is discussed, have been performed for the development of molecular theories for entangled polymer dynamics. Although probe chain dynamics in probe rheology is considered hypothetically as single chain dynamics in fixed tube-shaped confinement, it has not been fully elucidated. For instance, the end-to-end relaxation of probe chains is slower than that for monodisperse melts, unlike the conventional molecular theories. In this study, the viscoelastic and dielectric relaxations of probe chains were calculated by primitive chain network simulations. The simulations semi-quantitatively reproduced the dielectric relaxation, which reflects the effect of constraint release on the end-to-end relaxation. Fair agreement was also obtained for the viscoelastic relaxation time. However, the viscoelastic relaxation intensity was underestimated, possibly due to some flaws in the model for the inter-chain cross-correlations between probe and matrix chains.

Chain networking revealed by molecular dynamics simulation

Science.gov (United States)

Zheng, Yexin; Tsige, Mesfin; Wang, Shi-Qing

Based on Kremer-Grest model for entangled polymer melts, we demonstrate how the response of a polymer glass depends critically on the chain length. After quenching two melts of very different chain lengths (350 beads per chain and 30 beads per chain) into deeply glassy states, we subject them to uniaxial extension. Our MD simulations show that the glass of long chains undergoes stable necking after yielding whereas the system of short chains is unable to neck and breaks up after strain localization. During ductile extension of the polymer glass made of long chain significant chain tension builds up in the load-bearing strands (LBSs). Further analysis is expected to reveal evidence of activation of the primary structure during post-yield extension. These results lend support to the recent molecular model 1 and are the simulations to demonstrate the role of chain networking. This work is supported, in part, by a NSF Grant (DMR-EAGER-1444859)

Efficient Constructions for One-way Hash Chains

National Research Council Canada - National Science Library

Hu, Yih-Chun; Jakobsson, Markus; Perrig, Adrian

2003-01-01

.... Our first construction, the Sandwich-chain, provides a smaller bandwidth overhead for one-way chain values, and enables efficient verification of one-way chain values if the trusted one-way chain value is far away...

Human beta 2 chain of laminin (formerly S chain): cDNA cloning, chromosomal localization, and expression in carcinomas

DEFF Research Database (Denmark)

Wewer, U M; Gerecke, D R; Durkin, M E

1994-01-01

or other known laminin genes. Immunostaining showed that the beta 2 chain is localized to the smooth muscle basement membranes of the arteries, while the homologous beta 1 chain is confined to the subendothelial basement membranes. The beta 2 chain was found in the basement membranes of ovarian carcinomas......Overlapping cDNA clones that encode the full-length human laminin beta 2 chain, formerly called the S chain, were isolated. The cDNA of 5680 nt contains a 5391-nt open reading frame encoding 1797 amino acids. At the amino terminus is a 32-amino-acid signal peptide that is followed by the mature...... beta 2 chain polypeptide of 1765 amino acids with a calculated molecular mass of 192,389 Da. The human beta 2 chain is predicted to have all of the seven structural domains typical of the beta chains of laminin, including the short cysteine-rich alpha region. The amino acid sequence of human beta 2...

Chain formation of metal atoms

DEFF Research Database (Denmark)

Bahn, Sune Rastad; Jacobsen, Karsten Wedel

2001-01-01

The possibility of formation of single-atomic chains by manipulation of nanocontacts is studied for a selection of metals (Ni, Pd, Pt, Cu, Ag, Au). Molecular dynamics simulations show that the tendency for chain formation is strongest for Au and Pt. Density functional theory calculations indicate...... that the metals which form chains exhibit pronounced many-atom interactions with strong bonding in low coordinated systems....

Overcoming SMEs Financing and Supply Chain Obstacles by Introducing Supply Chain Finance

Directory of Open Access Journals (Sweden)

Abbasi Waseem Ahmed

2018-05-01

Full Text Available Keeping in view the importance of small and medium enterprises (SMEs for the growth of a nation, we must also keep an eye on the challenges faced by those SMEs. There are various kinds of financing and supply chain options available for SMEs but they still face lot of hindrances. This paper would help us to understand why SMEs are important for the development of any country and how could we help the SMEs from facing challenges related to financing and supply chain. This study further highlights the key financing issues faced by SMEs and also focuses on major supply chain challenges confronted by the SMEs. This study put emphasis on the concept of supply chain finance (SCF and that how SCF could help SMEs to overcome those challenges. In addition, this paper also points out the benefits and prospects of SMEs. Even though the concept of SCF is still in developing phase but it has shown significant assistance to SMEs in order to grow further.

Study and realisation of chaining operators

International Nuclear Information System (INIS)

Khan, Mohd Solaiman

1970-01-01

Within the frame of researches in the field of binary analysis performed in the nuclear instrumentation department of the Saclay Nuclear Centre, this research thesis belongs to the field of applications of binary analysis theories, and more particularly to the development and study of a chaining operator (chaining operators are used to develop complex automatic systems with a clear separation between information processing and program-based management of this processing). The author first recalls some notions of binary analysis: algebraic binary sets, products and their specific properties, and practical realisation of binary functions by means of logical circuits. He recalls methods for the general study of sequential systems; generalities, base functions, elementary reflex functions, graphical study of sequential systems, search for and removal of commutation variations. He discusses the present organisation of electronic computers: software, hardware, synchronous and asynchronous control. He presents chaining operators: generalities, computation of a chaining operator, static aspect of chaining operators. He reports and comments the practical realisation of chaining operators: components, measurements performed on elaborated chaining operators, simulation experimental set-up [fr

The fish industry - toward supply chain modelling

DEFF Research Database (Denmark)

Jensen, Toke Koldborg; Nielsen, Jette; Larsen, Erling

2010-01-01

such as quality and shelf-life issues enforce additional requirements onto the chains. In this article, we consider the supply chain structure of the fish industry. We discuss and illustrate the potential of using mathematical models to identify quality and value-adding activities. The article provides a first......Mathematical models for simulating and optimizing aspects of supply chains such as distribution, planning, and optimal handling of raw materials are widely used. However, modeling based on a holistic chain view including several or all supply chain agents is less studied, and food-related aspects...... step toward innovative supply chain modeling aimed to identify benefits for all agents along chains in the fish industry....

Excitation spectrum of ferromagnetic xxz-chains

International Nuclear Information System (INIS)

Schneider, T.; Stoll, E.

1983-01-01

In the history of xxz-Heisenberg spin chains, understanding of the dynamic form factors (DFF) is much less advanced. In this paper the DFF of ferromagnetic xxz chains as a tool to probe and interpret excitation spectrum is reviewed. The Isingheisenberg chain, and the Planar-Heisenberg chain (where HF approximations become exact) are studied. The results provide instructive connections between spin systems, interacting fermions and bosons. Various new aspects--thermally induced bound state effects in terms of central peaks in DFF for Isinglike xxz chains; the possibility to observe bound states in S /SUB zz/ (q,w) accessible by neutron scattering techniques, in the planar system--are found

Quantum tight-binding chains with dissipative coupling

International Nuclear Information System (INIS)

Mogilevtsev, D; Slepyan, G Ya; Garusov, E; Kilin, S Ya; Korolkova, N

2015-01-01

We present a one-dimensional tight-binding chain of two-level systems coupled only through common dissipative Markovian reservoirs. This quantum chain can demonstrate anomalous thermodynamic behavior contradicting Fourier law. Population dynamics of individual systems of the chain is polynomial with the order determined by the initial state of the chain. The chain can simulate classically hard problems, such as multi-dimensional random walks. (paper)

Supply chain management and optimization in manufacturing

CERN Document Server

Pirim, Harun; Yilbas, Bekir Sami

2014-01-01

This book introduces general supply chain terminology particularly for novice readers, state of the art supply chain management and optimization issues and problems in manufacturing. The book provides insights for making supply chain decisions, planning and scheduling through supply chain network. It introduces optimization problems, i.e. transportation of raw materials, products and location, inventory of plants, warehouses and retailers, faced throughout the supply chain network.

Equivalence of chain conformations in the surface region of a polymer melt and a single Gaussian chain under critical conditions.

Science.gov (United States)

Skvortsov, A M; Leermakers, F A M; Fleer, G J

2013-08-07

In the melt polymer conformations are nearly ideal according to Flory's ideality hypothesis. Silberberg generalized this statement for chains in the interfacial region. We check the Silberberg argument by analyzing the conformations of a probe chain end-grafted at a solid surface in a sea of floating free chains of concentration φ by the self-consistent field (SCF) method. Apart from the grafting, probe chain and floating chains are identical. Most of the results were obtained for a standard SCF model with freely jointed chains on a six-choice lattice, where immediate step reversals are allowed. A few data were generated for a five-choice lattice, where such step reversals are forbidden. These coarse-grained models describe the equilibrium properties of flexible atactic polymer chains at the scale of the segment length. The concentration was varied over the whole range from φ = 0 (single grafted chain) to φ = 1 (probe chain in the melt). The number of contacts with the surface, average height of the free end and its dispersion, average loop and train length, tail size distribution, end-point and overall segment distributions were calculated for a grafted probe chain as a function of φ, for several chain lengths and substrate∕polymer interactions, which were varied from strong repulsion to strong adsorption. The computations show that the conformations of the probe chain in the melt do not depend on substrate∕polymer interactions and are very similar to the conformations of a single end-grafted chain under critical conditions, and can thus be described analytically. When the substrate∕polymer interaction is fixed at the value corresponding to critical conditions, all equilibrium properties of a probe chain are independent of φ, over the whole range from a dilute solution to the melt. We believe that the conformations of all flexible chains in the surface region of the melt are close to those of an appropriate single chain in critical conditions, provided

Information flow in the pharmaceutical supply chain.

Science.gov (United States)

Yousefi, Nazila; Alibabaei, Ahmad

2015-01-01

Managing the supply chain plays an important role in creating competitive advantages for companies. Adequate information flow in supply chain is one of the most important issues in SCM. Therefore, using certain Information Systems can have a significant role in managing and integrating data and information within the supply chain. Pharmaceutical supply chain is more complex than many other supply chains, in the sense that it can affect social and political perspectives. On the other hand, managing the pharmaceutical supply chain is difficult because of its complexity and also government regulations in this field. Although, Iran has progressed a lot in pharmaceutical manufacturing, still there are many unsolved issues in managing the information flow in the pharmaceutical supply chain. In this study, we reviewed the benefits of using different levels of an integrated information system in the supply chain and the possible challenges ahead.

Formation and properties of metal-oxygen atomic chains

DEFF Research Database (Denmark)

Thijssen, W.H.A.; Strange, Mikkel; de Brugh, J.M.J.A.

2008-01-01

of longer atomic chains. The mechanical and electrical properties of these diatomic chains have been investigated by determining local vibration modes of the chain and by measuring the dependence of the average chain-conductance on the length of the chain. Additionally, we have performed calculations......Suspended chains consisting of single noble metal and oxygen atoms have been formed. We provide evidence that oxygen can react with and be incorporated into metallic one-dimensional atomic chains. Oxygen incorporation reinforces the linear bonds in the chain, which facilitates the creation...

Reinforcement learning in supply chains.

Science.gov (United States)

Valluri, Annapurna; North, Michael J; Macal, Charles M

2009-10-01

Effective management of supply chains creates value and can strategically position companies. In practice, human beings have been found to be both surprisingly successful and disappointingly inept at managing supply chains. The related fields of cognitive psychology and artificial intelligence have postulated a variety of potential mechanisms to explain this behavior. One of the leading candidates is reinforcement learning. This paper applies agent-based modeling to investigate the comparative behavioral consequences of three simple reinforcement learning algorithms in a multi-stage supply chain. For the first time, our findings show that the specific algorithm that is employed can have dramatic effects on the results obtained. Reinforcement learning is found to be valuable in multi-stage supply chains with several learning agents, as independent agents can learn to coordinate their behavior. However, learning in multi-stage supply chains using these postulated approaches from cognitive psychology and artificial intelligence take extremely long time periods to achieve stability which raises questions about their ability to explain behavior in real supply chains. The fact that it takes thousands of periods for agents to learn in this simple multi-agent setting provides new evidence that real world decision makers are unlikely to be using strict reinforcement learning in practice.

A concept for collaborative supply chain planning

DEFF Research Database (Denmark)

Alfnes, E.; Dreyer, H.C.; Hvolby, Hans-Henrik

2012-01-01

The main challenge for many manufacturers is the increased complexity of the supply chain, and as supply chains get more complicated enterprises require better tools for supply chain planning and execution. Many vendors offer systems to plan and control in-house operations, whereas mainly large...... vendors such as Oracle, SAP and I2 offer supply chain planning systems. This limits the ability for SMEs to exploit the supply chain planning options. This paper is part of a research project carried out to develop a new supply chain add-on for Microsoft AX, a very common system for SMEs. The paper...... discusses current supply chain planning solutions and presents a more simple and adaptive concept to be used in both SMEs and larger enterprises....

Inhibition of gastrin-stimulated gastric acid secretion by medium-chain triglycerides and long-chain triglycerides in healthy young men.

NARCIS (Netherlands)

Maas, M.I.M.; Hopman, W.P.M.; Katan, M.B.; Jansen, J.B.M.J.

1996-01-01

Long-chain triglycerides inhibit gastric acid secretion, but the effect of medium-chain triglycerides in humans is unknown. We compared the effects of intraduodenally perfused saline, medium-chain and long-chain triglycerides on gastrin-stimulated gastric acid secretion and cholecystokinin release.

Predictors of chain acquisition among independent dialysis facilities.

Science.gov (United States)

Pozniak, Alyssa S; Hirth, Richard A; Banaszak-Holl, Jane; Wheeler, John R C

2010-04-01

To determine the predictors of chain acquisition among independent dialysis providers. Retrospective facility-level data combined from CMS Cost Reports, Medical Evidence Forms, Annual Facility Surveys, and claims for 1996-2003. Independent dialysis facilities' probability of acquisition by a dialysis chain (overall and by chain size) was estimated using a discrete time hazard rate model, controlling for financial and clinical performance, practice patterns, market factors, and other facility characteristics. The sample includes all U.S. freestanding dialysis facilities that report not being chain affiliated for at least 1 year between 1997 and 2003. Above-average costs and better quality outcomes are significant determinants of dialysis chain acquisition. Facilities in larger markets were more likely to be acquired by a chain. Furthermore, small dialysis chains have different acquisition strategies than large chains. Dialysis chains appear to employ a mix of turn-around and cream-skimming strategies. Poor financial health is a predictor of chain acquisition as in other health care sectors, but the increased likelihood of chain acquisition among higher quality facilities is unique to the dialysis industry. Significant differences among predictors of acquisition by small and large chains reinforce the importance of using a richer classification for chain status.

Overview of MPC applications in supply chains: Potential use and benefits in the management of forest-based supply chains

Directory of Open Access Journals (Sweden)

Tatiana M. Pinho

2015-12-01

Full Text Available Aim of study: This work aims to provide an overview of Model Predictive Controllers (MPC applications in supply chains, to describe the forest-based supply chain and to analyse the potential use and benefits of MPC in a case study concerning a biomass supply chain.Area of study: The proposed methods are being applied to a company located in Finland.Material and methods: Supply chains are complex systems where actions and partners’ coordination influence the whole system performance. The increase of competitiveness and need of quick responses to the costumers implies the use of efficient management techniques. The control theory, particularly MPC, has been successfully used as a supply chain management tool. MPC is able to deal with dynamic interactions between the partners and to globally optimize the supply chain performance in the presence of disturbances. However, as far as is authors’ knowledge, there are no applications of this methodology in the forest-based supply chains. This work proposes a control architecture to improve the performance of the forest supply chain. The controller is based on prediction models which are able to simulate the system and deal with disturbances.Main results: The preliminary results enable to evaluate the impacts of disturbances in the supply chain. Thus, it is possible to react beforehand, controlling the schedules and tasks’ allocation, or alert the planning level in order to generate a new plan.Research highlights:   Overview of MPC applications in supply chains; forest-based supply chain description; case study presentation: wood biomass supply chain for energy production; MPC architecture proposal to decrease the operation times.Keywords: biomass; forest; Model Predictive Control; planning; supply chain.

The fishing industry - toward supply chain modelling

DEFF Research Database (Denmark)

Jensen, Toke Koldborg; Nielsen, Jette; Larsen, Erling P.

Mathematical models for simulating and optimizing supply chain aspects such as distribution planning and optimal use of raw materials are widely used. However, modelling based on a holistic chain view is less studied, and food-related aspects such as quality and shelf life issues enforce additional...... requirements onto the chains. In this paper, we consider the supply chain structure of the Danish fishing industry and illustrate the potential of using mathematical models to identify quality and value-adding activities. This is a first step toward innovative supply chain modelling aimed to identify benefits...... for actors along chains in the fishing industry....

Unit and internal chain profiles of maca amylopectin.

Science.gov (United States)

Zhang, Ling; Li, Guantian; Yao, Weirong; Zhu, Fan

2018-03-01

Unit chain length distributions of amylopectin and its φ, β-limit dextrins, which reflect amylopectin internal structure from three maca starches, were determined by high-performance anion-exchange chromatography with pulsed amperometric detection after debranching, and the samples were compared with maize starch. The amylopectins exhibited average chain lengths ranging from 16.72 to 17.16, with ranges of total internal chain length, external chain length, and internal chain length of the maca amylopectins at 12.49 to 13.68, 11.24 to 11.89, and 4.27 to 4.48. The average chain length, external chain length, internal chain length, and total internal chain length were comparable in three maca amylopectins. Amylopectins of the three maca genotypes studied here presented no significant differences in their unit chain length profiles, but did show significant differences in their internal chain profiles. Additional genetic variations between different maca genotypes need to be studied to provide unit- and internal chain profiles of maca amylopectin. Copyright © 2017. Published by Elsevier Ltd.

Mixed-chain phosphatidylcholine bilayers: structure and properties

International Nuclear Information System (INIS)

Mattai, J.; Sripada, P.K.; Shipley, G.G.

1987-01-01

Calorimetric and x-ray diffraction data are reported for two series of saturated mixed-chain phosphatidylcholines (PCs), 18:0/n:0-PC and n:0/18:0-PC, where the sn-1 and sn-2 fatty acyl chains on the glycerol backbone are systematically varied by two methylene groups from 18:0 to 10:0 (n = 18, 16, 14, 12, or 10). Fully hydrated PCs were annealed at -4 0 C and their multilamellar dispersions characterized by differential scanning calorimetry and x-ray diffraction. All mixed-chain PCs form low-temperature crystalline bilayer phases following low-temperature incubation, except 18:0/10:0-PC. The subtransition temperature (T/sub s/) shifts toward the main (chain melting) transition temperature (T/sub m/) as the sn-1 or sn-2 fatty acyl chain is reduced in length. T/sub m/ decreases with acyl chain length for both series of PCs except 18:0/10:0-PC, while for the positional isomers, n:0/18:0-PC and 18:0/n:0-PC, T/sub m/ is higher for the isomer with the longer acyl chain in the sn-2 position of the glycerol backbone. The conversion from the crystalline bilayer L/sub c/phase to the liquid-crystalline L/sub α/ phase with melted hydrocarbon chains occurs through a series of phase changes which are chain length dependent. Molecular models indicate that the bilayer gel phases for the more asymmetric PC series, 18:0/n:0-PC, must undergo progressive interdigitation with chain length reduction to maintain maximum chain-chain interaction. The L/sub β/* phase of 18:0/10:p-PC is the most stable structure for this PC below T/sub m/. The formation and stability of the triple-chain structures can be rationalized from molecular models

Almería’s tomato chain analysis and strategies to upgrade the chain

NARCIS (Netherlands)

García Martínez de San Vicente, I.T.

2012-01-01

The Almeria’s tomato value chain is currently reducing its competitiveness due to high production and processing costs as well as the maintenance of selling prices and the increase of competitors. Therefore, the purpose of this study was to assess the Almeria’s tomato value chain in order to

Analysis of a quantum Markov chain

International Nuclear Information System (INIS)

Marbeau, J.; Gudder, S.

1990-01-01

A quantum chain is analogous to a classical stationary Markov chain except that the probability measure is replaced by a complex amplitude measure and the transition probability matrix is replaced by a transition amplitude matrix. After considering the general situation, we study a particular example of a quantum chain whose transition amplitude matrix has the form of a Dirichlet matrix. Such matrices generate a discrete analog of the usual continuum Feynman amplitude. We then compute the probability distribution for these quantum chains

Markov set-chains

CERN Document Server

Hartfiel, Darald J

1998-01-01

In this study extending classical Markov chain theory to handle fluctuating transition matrices, the author develops a theory of Markov set-chains and provides numerous examples showing how that theory can be applied. Chapters are concluded with a discussion of related research. Readers who can benefit from this monograph are those interested in, or involved with, systems whose data is imprecise or that fluctuate with time. A background equivalent to a course in linear algebra and one in probability theory should be sufficient.

Phase separation in short-chain lecithin/gel-state long-chain lecithin aggregates

International Nuclear Information System (INIS)

Bian, J.; Roberts, M.F.

1990-01-01

Small bilayer particles for spontaneously from gel-state long-chain phospholipids such as dipalmitoylphosphatidylcholine and 0.2 mol fraction short-chain lecithins (e.g., diheptanoylphosphatidylcholine). When the particles are incubed at temperatures greater than the T m of the long-chain phosphatidylcholine (PC), the particles rapidly fuse (from 90-angstrom to ≥ 5,000-angstrom radius); this transition is reversible. A possible explanation for this behavior involves patching or phase separation of the short-chain component within the gel-state particle and randomization of both lipid species above T m . Differential scanning calorimetry, 1 H T 1 values of proteodiheptanoyl-PC in diheptanoyl-PC-d 26 /dipalmitoyl-PC-d 62 matrices of varying deuterium content, solid-state 2 H NMR spectroscopy as a function of temperature, and fluorescence pyrene excimer-to-monomer ratios as a function of mole fraction diheptanoyl-PC provide evidence that such phase separation must occur. These results are used to construct a phase diagram for the diheptanoyl-PC/dipalmitoyl-PC system, to propose detailed geometric models for the different lipid particles involved, and to understand phospholipase kinetics toward the different aggregates

On spin chains and field theories

International Nuclear Information System (INIS)

Roiban, Radu

2004-01-01

We point out that the existence of global symmetries in a field theory is not an essential ingredient in its relation with an integrable model. We describe an obvious construction which, given an integrable spin chain, yields a field theory whose 1-loop scale transformations are generated by the spin chain hamiltonian. We also identify a necessary condition for a given field theory to be related to an integrable spin chain. As an example, we describe an anisotropic and parity-breaking generalization of the XXZ Heisenberg spin chain and its associated field theory. The system has no nonabelian global symmetries and generally does not admit a supersymmetric extension without the introduction of more propagating bosonic fields. For the case of a 2-state chain we find the spectrum and the eigenstates. For certain values of its coupling constants the field theory associated to this general type of chain is the bosonic sector of the q-deformation of N = 4 SYM theory. (author)

Information flow in the pharmaceutical supply chain

OpenAIRE

Yousefi, Nazila; Alibabaei, Ahmad

2015-01-01

Managing the supply chain plays an important role in creating competitive advantages for companies. Adequate information flow in supply chain is one of the most important issues in SCM. Therefore, using certain Information Systems can have a significant role in managing and integrating data and information within the supply chain. Pharmaceutical supply chain is more complex than many other supply chains, in the sense that it can affect social and political perspectives. On the other hand, man...

Chain and network science: A research framework

NARCIS (Netherlands)

Omta, S.W.F.; Trienekens, J.H.; Beers, G.

2001-01-01

In this first article of the Journal on Chain and Network Science the base-line is set for a discussion on contents and scope of chain and network theory. Chain and network research is clustered into four main ‘streams’: Network theory, social capital theory, supply chain management and business

Fields From Markov Chains

DEFF Research Database (Denmark)

Justesen, Jørn

2005-01-01

A simple construction of two-dimensional (2-D) fields is presented. Rows and columns are outcomes of the same Markov chain. The entropy can be calculated explicitly.......A simple construction of two-dimensional (2-D) fields is presented. Rows and columns are outcomes of the same Markov chain. The entropy can be calculated explicitly....

Principles in Halal Supply Chain Management

NARCIS (Netherlands)

Tieman, H.; Vorst, van der J.G.A.J.; Maznah Che Ghazali,

2012-01-01

Purpose – The purpose of this paper is to introduce a new framework to optimise the design of halal food supply chains, called the “Halal Supply Chain Model”. In this research the main logistics business processes are defined, which are the determinants for the halal supply chain performance.

Experiences with the Mango Chain Game

NARCIS (Netherlands)

Meijer, S.A.; Zuñiga-Arias, G.; Sterrenburg, S.

2005-01-01

The mango chain game is a simulation game used for research purposes. It facilitated studying the bargaining power of Costa Rican mango producers in international supply chains of mango. The game simulates a simplified mango export chain in which real world local producers can play the role of

Chain inflation revisited

International Nuclear Information System (INIS)

Chialva, Diego; Danielsson, Ulf H

2008-01-01

This paper represents an in-depth treatment of the chain inflation scenario. We fully determine the evolution of the universe in the model, the conditions necessary in order to have a successful inflationary period, and the matching with the observational results regarding the cosmological perturbations. We study in great detail, and in general, the dynamics of the background, as well as the mechanism of generation of the perturbations. We also find an explicit formula for the spectrum of adiabatic perturbations. Our results prove that chain inflation is a viable model for solving the horizon, entropy and flatness problems of standard cosmology and for generating the right amount of adiabatic cosmological perturbations. The results are radically different from those found in previous works on the subject. Finally, we argue that there is a natural way to embed chain inflation into flux compactified string theory. We discuss the details of the implementation and how to fit observations

Gluon chains and multiquark hadrons

International Nuclear Information System (INIS)

Jadach, S.; Jezabek, M.

1979-01-01

A monopole approximation to the confining potential is proposed. In this approximation spatially separated groups of quarks carry a definite total colour charge. The potentials which lead to the formation of gluon chains are discussed. The generalization of a (3,3bar) chain notion, studied by Tiktopoulos, to the case of arbitrary colour charges is given. It is argued that these generalized chains may be unstable with respect to splitting into a system of weakly interacting chains of the (3,3bar) type. A unified picture of the high energy hadronic collisions, based on the gluon chain notion and the monopole approximation is proposed. In the meson-meson sector this picture is equivalent to the topological approach. For the other processes it is similar to the approach of Rossi and Veneziano. However, it is argued that the introduction of the junction line into the quark frame is superfluous. The results are expressed in the language of the coloured dual diagrams which provide a generalization of those of Harari and Rosner. (author)

Molecular Wring Resonances in Chain Molecules

DEFF Research Database (Denmark)

Bohr, Henrik; Brunak, Søren; Bohr, Jakob

1997-01-01

It is shown that the eigenfrequency of collective twist excitations in chain molecules can be in the megahertz and gigahertz range. Accordingly, resonance states can be obtained at specific frequencies, and phenomena that involve structural properties can take place. Chain molecules can alter the...... their conformation and their ability to function, and a breaking of the chain can result. It is suggested that this phenomenon forms the basis for effects caused by the interaction of microwaves and biomolecules, e.g. microwave assisted hydrolysis of chain molecules....

Environmental management the supply chain perspective

CERN Document Server

Wong, Christina W Y; Lun, Y H Venus; Cheng, T C E

2015-01-01

In view of the increasing quest for environmental management in businesses, this book provides a good reference to firms to understand how they may manage their supply chains to improve business and environmental performance. The book consists of six chapters covering such topics as environmental management, environmental management practices with supply chain efforts, collaborative environmental management, organizational capabilities in environmental management, environmental disclosure, and closed-loop supply chains. The book presents theory-driven discussions on the link between environmental management and business performance in the context of supply chain management. The book will be useful for firms to learn from the research findings and real-life cases to develop plans to implement environmental management practices jointly with supply chain partners.

The economic performance of supply chain(s) served by the mega freight transport vehicles

NARCIS (Netherlands)

Janic, M.

2014-01-01

This paper deals with the economic performances of supply chain(s) served by different including the mega freight transport vehicles. These performances are considered as a dimension of the supply chain’s sustainability together with the infrastructural, technical/technological, operational,

Use of supply chains and supply chain managment to improve the efficiency and effectiveness of GIS units

CSIR Research Space (South Africa)

Schmitz, Peter MU

2007-06-01

Full Text Available The objective of this study is to provide a tool, namely the establishment of supply chains and supply chain management to manage this chain, enabling a GIS unit to respond to the needs of their customers with the right product at the right time...

Chains of mean-field models

International Nuclear Information System (INIS)

Hamed Hassani, S; Macris, Nicolas; Urbanke, Ruediger

2012-01-01

We consider a collection of Curie–Weiss (CW) spin systems, possibly with a random field, each of which is placed along the positions of a one-dimensional chain. The CW systems are coupled together by a Kac-type interaction in the longitudinal direction of the chain and by an infinite-range interaction in the direction transverse to the chain. Our motivations for studying this model come from recent findings in the theory of error-correcting codes based on spatially coupled graphs. We find that, although much simpler than the codes, the model studied here already displays similar behavior. We are interested in the van der Waals curve in a regime where the size of each Curie–Weiss model tends to infinity, and the length of the chain and range of the Kac interaction are large but finite. Below the critical temperature, and with appropriate boundary conditions, there appears a series of equilibrium states representing kink-like interfaces between the two equilibrium states of the individual system. The van der Waals curve oscillates periodically around the Maxwell plateau. These oscillations have a period inversely proportional to the chain length and an amplitude exponentially small in the range of the interaction; in other words, the spinodal points of the chain model lie exponentially close to the phase transition threshold. The amplitude of the oscillations is closely related to a Peierls–Nabarro free energy barrier for the motion of the kink along the chain. Analogies to similar phenomena and their possible algorithmic significance for graphical models of interest in coding theory and theoretical computer science are pointed out

The Supply Chain Risk Management

OpenAIRE

Skitsko Volodymyr I.; Voynikov Mykola Yu.

2018-01-01

The article considers current approaches of risk-management in supply chains, the main steps of the risk management process are analyzed and detailed both for a separate enterprise – participant of supply chain, for the supply chain in general, and for the Beer game, based on the international risk management standards. The article provides a way to assess the risks of the «producer» in the Beer game according to the three strategies of its behavior, which presumably can correspond to differe...

Simulation study of the initial crystallization processes of poly(3-hexylthiophene) in solution: ordering dynamics of main chains and side chains.

Science.gov (United States)

Takizawa, Yuumi; Shimomura, Takeshi; Miura, Toshiaki

2013-05-23

We study the initial nucleation dynamics of poly(3-hexylthiophene) (P3HT) in solution, focusing on the relationship between the ordering process of main chains and that of side chains. We carried out Langevin dynamics simulation and found that the initial nucleation processes consist of three steps: the ordering of ring orientation, the ordering of main-chain vectors, and the ordering of side chains. At the start, the normal vectors of thiophene rings aligned in a very short time, followed by alignment of main-chain end-to-end vectors. The flexible side-chain ordering took almost 5 times longer than the rigid-main-chain ordering. The simulation results indicated that the ordering of side chains was induced after the formation of the regular stack structure of main chains. This slow ordering dynamics of flexible side chains is one of the factors that cause anisotropic nuclei growth, which would be closely related to the formation of nanofiber structures without external flow field. Our simulation results revealed how the combined structure of the planar and rigid-main-chain backbones and the sparse flexible side chains lead to specific ordering behaviors that are not observed in ordinary linear polymer crystallization processes.

Diffusion of chains in a periodic potential

Science.gov (United States)

Terranova, G. R.; Mártin, H. O.; Aldao, C. M.

2017-09-01

We studied the diffusion of 1D rigid chains in a square wave potential of period T. We considered chains of type A (composed of N particles A) and chains of type A-B (composed of N/2 particles A and N/2 particles B). The square wave potential represents domains, a lamellar structure observed for block copolymers, in which the repulsive δ energy between each A particle (B particle) of the chain and B particles (A particles) of the medium where the chains diffuse. From Monte Carlo simulations and analytical results it is found that the normalized diffusivity D, for N\\ll T , presents a universal behavior as a function of X  =  Nδ for chains of type A and X  =  (Nδ  -  lnT 2) for chains of type A-B, with and exponential decay for large values of X. For fixed values of δ and T, D is a periodic function of N with period T and 2T for chains of type A and type A-B, respectively.

Achieving Supply Chain Integration within Construction Industry

Directory of Open Access Journals (Sweden)

Peter McDermotti

2012-11-01

Full Text Available The main driver behind the adoption of supply chain management (SCM philosophy into the construction industry was the successes within other industry sectors. SCM can be defined as network of different organisations, linked upstream and downstream in a chain, aiming to produce quality and value in the services and products for the end consumers through integrated processes and activities. In order to achieve the optimised level of integration of the whole supply chain, the industry has responded in various forms. This paper will discuss different initiatives by the researchers,construction industry,and the UK government in order to achieve optimal level of supply chain integration. This paper will discuss the concept of aggregation,and also look at other supply chain integration related concepts including client-led supply chain, knowledge about the whole supply chain, effects of procurement on integration of supply chain, etc. The paper will give a brief overview and initial findings of a project undertaken by the authors, and also include examples from the UK construction industry on bundling of the supply and demand.

Modelling Lean and Green Supply Chain

Science.gov (United States)

Duarte, Susana Carla Vieira Lino Medina

The success of an organization depends on the effective control of its supply chain. It is important to recognize new opportunities for organization and its supply chain. In the last few years the approach to lean, agile, resilient and green supply chain paradigms has been addressed in the scientific literature. Research in this field shows that the integration of these concepts revealed some contradictions among so many paradigms. This thesis is mainly focused on the lean and green approaches. Thirteen different management frameworks, embodied in awards, standards and tools were studied to understand if they could contribute for the modelling process of a lean and green approach. The study reveals a number of categories that are common in most management frameworks, providing adequate conditions for a lean and green supply chain transformation. A conceptual framework for the evaluation of a lean and green organization`s supply chain was proposed. The framework considers six key criteria, namely, leadership, people, strategic planning, stakeholders, processes and results. It was proposed an assessment method considering a criteria score for each criterion. The purpose is to understand how lean and green supply chain can be compatible, using principles, practices, techniques or tools (i.e. elements) that support both, a lean and a green approach, in all key criteria. A case study in the automotive upstream supply chain was performed to understand more deeply if the elements proposed for the conceptual framework could be implemented in a real-scenario. Based on the conceptual framework and the case study, a roadmap to achieve a lean-green transformation is presented. The proposed roadmap revealed its contribution to the understanding on how and when an organization`s supply chain should apply the lean and green elements. This study is relevant to practice, as it may assist managers in the adoption of a lean and green supply chain approach, giving insights for the

Liquid crystal polymers: evidence of hairpin defects in nematic main chains, comparison with side chain polymers

Science.gov (United States)

Li, M. H.; Brûlet, A.; Keller, P.; Cotton, J. P.

1996-09-01

This article describes the conformation of two species of liquid crystalline polymers as revealed by small angle neutron scattering. The results obtained with side chain polymers are recalled. The procedure used to analyze the scattering data of main chains in the nematic phase is reported in this paper. It permits a demonstration of the existence of hairpins. Comparison of both polymer species shows that in the isotropic phase, the two polymers adopt a random coil conformation. In the nematic phase, the conformations are very different; the side chains behave as a melt of penetrable random coils whereas the main chains behave as a nematic phase of non penetrable cylinders.

Kinematics and Dynamics of Roller Chain Drives

DEFF Research Database (Denmark)

Fuglede, Niels

There are two main subjects of this work: Kinematic and dynamic modeling and analysis of roller chain drives. In the kinematic analysis we contribute first with a complete treatment of the roller chain drive modeled as a four-bar mechanism. This includes a general, exact and approximate analysis...... which is useful for predicting the characteristic loading of the roller chain drive. As a completely novel contribution, a kinematic model and analysis is presented which includes both spans and sprockets in a simple chain drive system. A general procedure for determination of the total wrapping length...... is presented, which also allows for exact sprocket center positions for a chain with a given number of links. Results show that the total chain wrapping length varies periodically with the tooth frequency. These results are of practical importance to both the design, installation and operation of roller chain...

The Governance of Global Wealth Chains

DEFF Research Database (Denmark)

Seabrooke, Leonard; Wigan, Duncan

liability and (3) innovation capacities among suppliers of products used in wealth chains. We then differentiate five types of global value chain governance - market, modular, relational, captive, an d hierarchy – which range from simple ‘off shelf’ products shielded from regulators by advantageous...... international tax laws to highly complex and flexible innovative financial products produced by large financial institutions and corporations. This article highlights how Global Wealth Cha ins intersect with value chains and real economies, and provides three brief case studies on offshore shell companies......This introduction to the Special Issue creates a theoretical framework to explain how Global Wealth Chains are created, maintained, and governed. We draw upon different strands of literature, including scholarship in international political economy and economic geography on Global Value Chains...

Research Methodologies in Supply Chain Management

DEFF Research Database (Denmark)

Kotzab, Herbert

. Within the 36 chapters 70 authors bring together a rich selection of theoretical and practical examples of how research methodologies are applied in supply chain management. The book contains papers on theoretical implications as well as papers on a range of key methods, such as modelling, surveys, case...... studies or action research. It will be of great interest to researchers in the area of supply chain management and logistics, but also to neighbouring fields, such as network management or global operations.......While supply chain management has risen to great prominence in recent year, there are hardly related developments in research methodologies. Yet, as supply chains cover more than one company, one central issue is how to collect and analyse data along the whole or relevant part of the supply chain...

Sustainable Value Chains and Labour - Linking Chain and "Inner Drivers" : From Concepts to Practice

NARCIS (Netherlands)

L.J. Pegler (Lee)

2011-01-01

textabstractGlobal value chains are driven by considerations of cost and efficiency but just as much by power relations. This appears evident from studies of industrial relations and labour outcomes within value chains, especially those where drivenness is most explicit. Within a context of

Pengukuran Performansi Supply Chain Dengan Menggunakan Supply Chain Operation Reference (Scor) Berbasis Analytical Hierarchy Process (Ahp) Dan Objective Matrix (Omax)

OpenAIRE

Hanugrani, Nikita; Setyanto, Nasir Widha; Efranto, Remba Yanuar

2013-01-01

PT. Indonesian Tobacco merupakan salah satu Perusahaan rokok yang telah menerapkan konsep Supply Chain Management untuk mengatur proses aliran material. Selama berjalannya Supply Chain Management tersebut, Perusahaan belum pernah melakukan pengukuran terhadap performansi supply chain yang melibatkan semua pihak yang terkait. Metode yang digunakan untuk mengukur performansi supply chain adalah Supply Chain Operation Reference (SCOR). SCOR merupakan suatu model acuan proses untuk operasi supply...

Nonlinear tearing mode and vortex chains

International Nuclear Information System (INIS)

Jovanovic, D.; Vranjes, J.

1996-01-01

We study the nonlinear stage of a tearing mode, whose island width exceeds the tearing layer thickness, and the wavelength is of the order of collisionless skin depth. A coherent solution is found in the form of a moving vortex chain. It is the result of a self-organization process, which adjusts the profile of the sheared poloidal magnetic field and excites a localized perpendicular sheared plasma flow, consisting of three counterstreaming jets. A numerical solution shows a twin chain of plasma vortices, coupled with a single chain of magnetic islands, whose width is of the order of collisionless skin depth. Adiabatic evolution of the vortex chain in the presence of small viscosity reveals its finite lifetime. The chain destruction may occur either directly, or through a sequence of bifurcations (corresponding to abrupt changes of the vortex chain parameters) to magnetic field stochastization within a layer of the collisionless skin depth scale, which occurs before the magnetic island overlapping takes place. This provides a new mechanism for the anomalous transport. (orig.)

Domain walls in single-chain magnets

Science.gov (United States)

Pianet, Vivien; Urdampilleta, Matias; Colin, Thierry; Clérac, Rodolphe; Coulon, Claude

2017-12-01

The topology and creation energy of domain walls in different magnetic chains (called Single-Chain Magnets or SCMs) are discussed. As these domain walls, that can be seen as "defects", are known to control both static and dynamic properties of these one-dimensional systems, their study and understanding are necessary first steps before a deeper discussion of the SCM properties at finite temperature. The starting point of the paper is the simple regular ferromagnetic chain for which the characteristics of the domain walls are well known. Then two cases will be discussed (i) the "mixed chains" in which isotropic and anisotropic classical spins alternate, and (ii) the so-called "canted chains" where two different easy axis directions are present. In particular, we show that "strictly narrow" domain walls no longer exist in these more complex cases, while a cascade of phase transitions is found for canted chains as the canting angle approaches 45∘. The consequence for thermodynamic properties is briefly discussed in the last part of the paper.

Probabilistic Chain Teleportation of a Qutrit-State

International Nuclear Information System (INIS)

Wang Meiyu; Yan Fengli

2010-01-01

We investigate chain teleportation of a qutrit-state via the non-maximally two-qutrit entangled channels. For the case of four parties, the efficiencies of two chain teleportation protocols, the separate chain teleportation protocol (SCTP), and the global chain teleportation protocol (GCTP), are calculated. In SCTP the errors are corrected between every step while in GCTP the errors are corrected only at the end. Furthermore, we present a piecewise global chain teleportation protocol (PGCTP) for keeping away from the inconvenience of error-correction of GCTP. We show that PGCTP is more efficient than SCTP. (general)

Regeneration and general Markov chains

Directory of Open Access Journals (Sweden)

Vladimir V. Kalashnikov

1994-01-01

Full Text Available Ergodicity, continuity, finite approximations and rare visits of general Markov chains are investigated. The obtained results permit further quantitative analysis of characteristics, such as, rates of convergence, continuity (measured as a distance between perturbed and non-perturbed characteristics, deviations between Markov chains, accuracy of approximations and bounds on the distribution function of the first visit time to a chosen subset, etc. The underlying techniques use the embedding of the general Markov chain into a wide sense regenerative process with the help of splitting construction.

Markov Chains and Markov Processes

OpenAIRE

Ogunbayo, Segun

2016-01-01

Markov chain, which was named after Andrew Markov is a mathematical system that transfers a state to another state. Many real world systems contain uncertainty. This study helps us to understand the basic idea of a Markov chain and how is been useful in our daily lives. For some times there had been suspense on distinct predictions and future existences. Also in different games there had been different expectations or results involved. That is the reason why we need Markov chains to predict o...

New sensors and processing chain

CERN Document Server

Yaakoubi, Nourdin

2014-01-01

A vital tool for researchers, engineers, and students, New Sensors and Processing Chain focuses on the processing chain to set up in order to extract relevant information on various systems. Highlighting the design of new microsensors and various applications, the authors present recent progress in instrumentation and microsystem design, providing insight to the modification of the sensor itself as well as its environment. Various applications illustrate the presentations, which show how a processing chain is organized from the data acquired by a specific sensor.

Trauma dos ossos temporais e suas complicações: aspectos na tomografia computadorizada Temporal bone trauma and complications: computed tomography findings

Directory of Open Access Journals (Sweden)

Ana Maria Doffémond Costa

2013-04-01

Full Text Available A maioria das fraturas dos ossos temporais resulta de traumas cranianos bruscos, de alta energia, estando muitas vezes relacionadas a outras fraturas cranianas ou a politraumatismo. As fraturas e os deslocamentos da cadeia ossicular, na orelha média, representam umas das principais complicações das injúrias nos ossos temporais e, por isso, serão abordadas de maneira mais profunda neste artigo. Os outros tipos de injúrias englobam as fraturas labirínticas, fístula dural, paralisia facial e extensão da linha de fratura ao canal carotídeo. A tomografia computadorizada tem papel fundamental na avaliação inicial dos pacientes politraumatizados, pois é capaz de identificar injúrias em importantes estruturas que podem causar graves complicações, como perda auditiva de condução ou neurossensorial, tonturas e disfunções do equilíbrio, fístulas perilinfáticas, paralisia do nervo facial, lesões vasculares, entre outras.Most temporal bone fractures result from high-energy blunt head trauma, and are frequently related to other skull fractures or to polytrauma. Fractures and displacements of ossicular chain in the middle ear represent some of the main complications of temporal bone injury, and hence they will be more deeply approached in the present article. Other types of injuries include labyrinthine fractures, dural fistula, facial nerve paralysis and extension into the carotid canal. Computed tomography plays a fundamental role in the initial evaluation of polytrauma patients, as it can help to identify important structural injuries that may lead to severe complications such as sensorineural hearing loss, conductive hearing loss, dizziness and balance dysfunction, perilymphatic fistulas, facial nerve paralysis, vascular injury and others.

Congenital external auditory canal atresia and stenosis: temporal bone CT findings

Energy Technology Data Exchange (ETDEWEB)

Lee, Dong Hoon; Kim, Bum Soo; Jung, So Lyung; Kim, Young Joo; Chun, Ho Jong; Choi, Kyu Ho; Park, Shi Nae [College of Medicine, Catholic Univ. of Korea, Seoul (Korea, Republic of)

2002-04-01

To determine the computed tomographic (CT) findings of atresia and stenosis of the external auditory canal (EAC), and to describe associated abnormalities in surrounding structures. We retrospectively reviewed the axial and coronal CT images of the temporal bone in 15 patients (M:F=8:7;mean age, 15.8 years) with 16 cases of EAC atresia (unilateral n=11, bilateral n=1) and EAC stenosis (unilateral n=3). Associated abnormalities of the EAC, tympanic cavity, ossicles, mastoid air cells, eustachian tube, facial nerve course, mandibular condyle and condylar fossa, sigmoid sinus and jugular bulb, and the base of the middle cranial fossa were evaluated. Thirteen cases of bony EAC atresia (one bilateral), with an atretic bony plate, were noted, and one case of unilateral membranous atresia, in which a soft tissue the EAC. A unilateral lesion occurred more frequently on the right temporal bone (n=8, 73%). Associated abnormalities included a small tympanic cavity (n=8, 62%), decreased mastoid pneumatization (n=8, 62%), displacement of the mandibular condyle and the posterior wall of the condylar fossa (n=7, 54%), dilatation of the Eustachian tube (n=7, 54%), and inferior displacement of the temporal fossa base (n=8, 62%). Abnormalities of ossicles were noted in the malleolus (n=12, 92%), incus (n=10, 77%) and stapes (n=6, 46%). The course of the facial nerve was abnormal in four cases, and abnormality of the auditory canal was noted in one. Among three cases of EAC stenosis, ossicular aplasia was observed in one, and in another the location of the mandibular condyle and condylar fossa was abnormal. In the remaining case there was no associated abnormality. Atresia of the EAC is frequently accompanied by abnormalities of the middle ear cavity, ossicles, and adjacent structures other than the inner ear. For patients with atresia and stenosis of this canal, CT of the temporal bone is essentially helpful in evaluating these associated abnormalities.

Chain chemical reactions during matrix devitrification

International Nuclear Information System (INIS)

Barkalov, I.M.

1980-01-01

Investigation results of chain reaction mechanisms, proceeding at devitrification of glass-like matrices under the effect of γ-irradiation are summarized. Peculiarities of kinetics and mechanism of chain reactions proceeding at devitrification are considered: hydrocarbon chlorination, polymerization of vinyl monomers, copolymerization and graft polymerization. Possible application aspects of the chain reaction conducting during matrix devitrification are also considered

Symmetry chains and adaptation coefficients

International Nuclear Information System (INIS)

Fritzer, H.P.; Gruber, B.

1985-01-01

Given a symmetry chain of physical significance it becomes necessary to obtain states which transform properly with respect to the symmetries of the chain. In this article we describe a method which permits us to calculate symmetry-adapted quantum states with relative ease. The coefficients for the symmetry-adapted linear combinations are obtained, in numerical form, in terms of the original states of the system and can thus be represented in the form of numerical tables. In addition, one also obtains automatically the matrix elements for the operators of the symmetry groups which are involved, and thus for any physical operator which can be expressed either as an element of the algebra or of the enveloping algebra. The method is well suited for computers once the physically relevant symmetry chain, or chains, have been defined. While the method to be described is generally applicable to any physical system for which semisimple Lie algebras play a role we choose here a familiar example in order to illustrate the method and to illuminate its simplicity. We choose the nuclear shell model for the case of two nucleons with orbital angular momentum l = 1. While the states of the entire shell transform like the smallest spin representation of SO(25) we restrict our attention to its subgroup SU(6) x SU(2)/sub T/. We determine the symmetry chains which lead to total angular momentum SU(2)/sub J/ and obtain the symmetry-adapted states for these chains

Supply chain design approaches for supply chain resilience: A qualitative study of South African fast-moving consumer goods grocery manufacturers

OpenAIRE

Assilah Agigi; Wesley Niemann; Theuns Kotzé

2016-01-01

Orientation: In today’s globalised and complex business environment, firms are ever more vulnerable to supply chain disruptions, originating both internally and externally from the supply chain. Supply chain resilience minimises the impact of a disruption through design approaches, which allows the supply chain to respond appropriately to disruptive events. Research purpose: This article investigated the supply chain risks faced by grocery manufacturers in the South African fast-moving co...

Integration of vaccine supply chains with other health commodity supply chains: a framework for decision making.

Science.gov (United States)

Yadav, Prashant; Lydon, Patrick; Oswald, Julianna; Dicko, Modibo; Zaffran, Michel

2014-11-28

One of the primary objectives of National Immunization Programs is to strengthen and optimize immunization supply chains so that vaccines are delivered to the end recipients effectively, efficiently and sustainably. As a result of larger investments in global health and a wider portfolio of vaccines, global agencies are recognizing the need for vaccine supply chains to operate at their most optimal levels. Integration with other supply chains is often presented as a strategy to improve efficiency. However, it remains unclear if the proposed benefits from integration of vaccine supply chains with other supply chains will outweigh the costs. This paper provides a framework for deciding where such integration offers the most significant benefits. It also cautions about the pitfalls of integration as a one size fits all strategy. It also highlights the need for systematic collection of cost and efficiency data in order to understand the value of integration and other such initiatives. Copyright © 2014 Elsevier Ltd. All rights reserved.

Designing the Reverse Supply Chain

DEFF Research Database (Denmark)

Gobbi, Chiara

2011-01-01

Purpose – The purpose of this paper is to explore the impact of the product residual value (PRV) and the loss of value over time of returned products in the reverse supply chain configuration. It also examines whether or not the distinction of Fisher's functional and innovative products holds...... that allows for recapturing most of the PRV. These notions have then been tested by analyzing two reverse supply chains with a case study research methodology. Findings – The findings show that low PRV is associated with second-class recovery options (recycling and energy recovery) and that high PRV...... is associated with first-class recovery options (reconditioning and remarketing). When the recovery option is recycling, time is not relevant, the primary objective is cost reduction (efficiency), the chain is centralized, and actors and phases of the reverse chain are determined by the specificity...

Supply Chain Management in Albania: An Empirical Study

OpenAIRE

Alma Spaho, Thoma Mitre

2012-01-01

Supply chain management in Albania has received little attention in the recent literature. Many companies now realize that actions taken by one member of the chain can influence the profitability of all others in the chain. Companies are increasingly thinking in terms of competing as part of a supply chain against other supply chains, rather than as a single firm against other individual firms. The aim of the paper is to investigate the current situation of supply chain management in Albania ...

Markov chains theory and applications

CERN Document Server

Sericola, Bruno

2013-01-01

Markov chains are a fundamental class of stochastic processes. They are widely used to solve problems in a large number of domains such as operational research, computer science, communication networks and manufacturing systems. The success of Markov chains is mainly due to their simplicity of use, the large number of available theoretical results and the quality of algorithms developed for the numerical evaluation of many metrics of interest.The author presents the theory of both discrete-time and continuous-time homogeneous Markov chains. He carefully examines the explosion phenomenon, the

Quadratic Variation by Markov Chains

DEFF Research Database (Denmark)

Hansen, Peter Reinhard; Horel, Guillaume

We introduce a novel estimator of the quadratic variation that is based on the the- ory of Markov chains. The estimator is motivated by some general results concerning filtering contaminated semimartingales. Specifically, we show that filtering can in prin- ciple remove the effects of market...... microstructure noise in a general framework where little is assumed about the noise. For the practical implementation, we adopt the dis- crete Markov chain model that is well suited for the analysis of financial high-frequency prices. The Markov chain framework facilitates simple expressions and elegant analyti...

Fusion chain reaction - a chain reaction with charged particles

International Nuclear Information System (INIS)

Peres, A.; Shvarts, D.

1975-01-01

When a DT-plasma is compressed to very high density, the particles resulting from nuclear reactions give their energy mostly to D and T ions, by nuclear collisions, rather than to electrons as usual. Fusion can thus proceed as a chain reaction, without the need of thermonuclear temperatures. In this paper, we derive relations for the suprathermal ion population created by a fusion reaction. Numerical integration of these equations shows that a chain reaction can proceed in a cold infinite DT-plasma at densities above 8.4x10 27 ions.cm -3 . Seeding the plasma with a small amount of 6 Li reduces the critical density to 7.2x10 27 ions.cm -3 (140000times the normal solid density). (author)

Governance Structure Choices in Supply Chain Management Evidence from Spanish and Chinese Pork Chain Cases

OpenAIRE

Ji, Chen

2012-01-01

The author participated in the 6 th EU Framework Project ―Q-pork Chains (FP6-036245-2)‖ from 2007 to 2009. With understanding of work reports from China and other countries, it is found that compared with other countries, China has great problems in pork quality and safety. By comparing the pork chain management between China and Spain, It is found that the difference in governance structure is one of the main differences in pork chain management between Spain and China. In China, spot-...

Issue on supply chain of renewable energy

International Nuclear Information System (INIS)

Cucchiella, Federica; D’Adamo, Idiano

2013-01-01

Highlights: • One of the most relevant debates, is related to energy and environmental issue. • The development of renewable energy usage is due to several factors. • Indeed challenges from a supply chain point of view are required. • Thorough survey on topics of supply chain and renewable energy has been conducted. • Findings are discussed against the backdrop of SCs as sustainable RE option. - Abstract: Actually, one of the most relevant debates, among both citizens that government, is related to energy and environmental issue. The development of renewable energy usage is due to several factors such as the political strategic decisions and geographical situation. Indeed the high development of renewable energies requires challenges from a supply chain point of view. In this paper, a thorough survey of the extant literature on the topic of supply chain (SC) and renewable energy (RE) has been conducted. English papers published on international peer-reviewed journals from 2003 to 2013 have been considered. Sustainable Supply Chain Management (SSCM) resolves the duality between environmental, economic and social aspects. Sustainable manufacturing practices play an essential role in promoting renewable energy development and commercialization; this will require significant changes to the industry’s traditional Supply Chain Management and business model. The aim of the paper is investigate literature insights useful to increase the performance and overcome barriers to the RE supply chain development. Like many typical supply chains, also supply chain related to RE includes elements such as: physical, information, and financial flows. The present research is useful to individualize characteristics of a RE supply chain. Moreover, the research is useful improve the performance of RE supply chain in some aspects like: • better control supply chain costs to make renewable energy more affordable; • manage supply chain to address weakened demand in the near

Waste Reduction in Fresh Food Supply Chains

DEFF Research Database (Denmark)

Kaipia, Riikka; Loikkanen, Lauri; Dukovska-Popovska, Iskra

2011-01-01

The paper studies a well-known phenomenon, information sharing in supply chains, in a new context, fresh foods, with a specific goal, supporting sustainable performance in the supply chain. Fresh foods are important for retail stores, representing around half of retail sales, but form a challengi...... and heterogeneous group of products to manage. The value of the paper lies in its pointing out detailed solutions to how in real-life supply chains data can be used efficiently to improve the performance of the supply chain.......The paper studies a well-known phenomenon, information sharing in supply chains, in a new context, fresh foods, with a specific goal, supporting sustainable performance in the supply chain. Fresh foods are important for retail stores, representing around half of retail sales, but form a challenging...

Sustainable Supply Chain Design in Social Businesses

DEFF Research Database (Denmark)

Tate, Wendy L.; Bals, Lydia

2018-01-01

A significant conceptual and practical challenge for companies is how to integrate triple bottom line (TBL) sustainability into their global supply chains. In supply chain research, the classic economic perspective—the business of business is to be profitable—still dominates, followed by coverage......, how to connect these insights into supply chain design for TBL sustainability has not been studied. Therefore, the purpose of this research was to move the theory of supply chain forward into the sustainable supply chain management (SSCM) research agenda. Toward that purpose, the paper analyzes...... of the environmental dimension; the social dimension is underrepresented. Stakeholders, however, are calling for a TBL perspective that simultaneously includes environmental, social, and economic gains. While there have been recent theoretical advances on how to characterize supply chains in terms of their structure...

Delivering Sustainability Through Supply Chain Distribution Network Redesign

Directory of Open Access Journals (Sweden)

Denise Ravet

2013-09-01

Full Text Available Purpose - Companies could gain (cost, service, green/sustainable competitive advantage through the supply chain network. The goal of this article is to study how to deliver sustainability through the supply chain distribution network redesign.Design/methodology/approach - A literature review is conducted to examine research relating to sustainable supply chain strategies and supply chain distribution network redesign.Findings - A study of the supply chain literature reveals the importance to rethink the supply chain distribution network design and to treat sustainability as integral to operations.

Greenhouse gas emission factor for coal power chain in China and the comparison with nuclear power chain

International Nuclear Information System (INIS)

Ma Zhonghai; Pan Ziqiang; He Huimin

1999-01-01

The Greenhouse Gas Emission for coal power chain in China is analyzed in detail and comprehensively by using the Life Cycle Analysis method. The Greenhouse Gas Emission Factors (GGEF) in each link and for the total power chain are calculated. The total GGEF for coal power chain is 1302.3 gCO 2 /kWh, about 40 times more than that for nuclear power chain. And consequently greenhouse effect could not be aggravated further by nuclear power. The energy strategy for nuclear power development is one of reality ways to retard the greenhouse effect, put resources into rational use and protect environment

Platelet-derived growth factor (PDGF) B-chain gene expression by activated blood monocytes precedes the expression of the PDGF A-chain gene

International Nuclear Information System (INIS)

Martinet, Y.; Jaffe, H.A.; Yamauchi, K.; Betsholtz, C.; Westermark, B.; Heldin, C.H.; Crystal, R.G.

1987-01-01

When activated, normal human blood monocytes are known to express the c-sis proto-oncogene coding for PDGF B-chain. Since normal human platelet PDGF molecules are dimers of A and B chains and platelets and monocytes are derived from the same marrow precursors, activated blood monocytes were simultaneously evaluated for their expression of PDGF A and B chain genes. Human blood monocytes were purified by adherence, cultured with or without activation by lipopolysaccharide and poly(A)+ RNA evaluated using Northern analysis and 32 P-labeled A-chain and B-chain (human c-sis) probes. Unstimulated blood monocytes did not express either A-chain or B-chain genes. In contrast, activated monocytes expressed a 4.2 kb mRNA B-chain transcript at 4 hr, but the B-chain mRNA levels declined significantly over the next 18 hr. In comparison, activated monocytes expressed very little A-chain mRNA at 4 hr, but at 12 hr 1.9, 2.3, and 2.8 kb transcripts were observed and persisted through 24 hr. Thus, activation of blood monocytes is followed by PDGF B-chain gene expression preceding PDGF A-chain gene expression, suggesting a difference in the regulation of the expression of the genes for these two chains by these cells

Primitive-path statistics of entangled polymers: mapping multi-chain simulations onto single-chain mean-field models

International Nuclear Information System (INIS)

Steenbakkers, Rudi J A; Schieber, Jay D; Tzoumanekas, Christos; Li, Ying; Liu, Wing Kam; Kröger, Martin

2014-01-01

We present a method to map the full equilibrium distribution of the primitive-path (PP) length, obtained from multi-chain simulations of polymer melts, onto a single-chain mean-field ‘target’ model. Most previous works used the Doi–Edwards tube model as a target. However, the average number of monomers per PP segment, obtained from multi-chain PP networks, has consistently shown a discrepancy of a factor of two with respect to tube-model estimates. Part of the problem is that the tube model neglects fluctuations in the lengths of PP segments, the number of entanglements per chain and the distribution of monomers among PP segments, while all these fluctuations are observed in multi-chain simulations. Here we use a recently proposed slip-link model, which includes fluctuations in all these variables as well as in the spatial positions of the entanglements. This turns out to be essential to obtain qualitative and quantitative agreement with the equilibrium PP-length distribution obtained from multi-chain simulations. By fitting this distribution, we are able to determine two of the three parameters of the model, which govern its equilibrium properties. This mapping is executed for four different linear polymers and for different molecular weights. The two parameters are found to depend on chemistry, but not on molecular weight. The model predicts a constant plateau modulus minus a correction inversely proportional to molecular weight. The value for well-entangled chains, with the parameters determined ab initio, lies in the range of experimental data for the materials investigated. (paper)

Risk assessment and management logistics chains

Directory of Open Access Journals (Sweden)

Vladimir Vikulov

2014-03-01

Full Text Available Background: In the context of economic globalization and increasing complexity of economic relations enterprises need methods and techniques to improve and sustain their position on the global market. Integration processes offer business new opportunities, but at the same time present new challenges for the management, including the key objectives of the risk management. Method: On the basis of analysis tools known from the pertinent literature (Supply Chain Management and Supply Chain Risk Management methods, methods of probability theory, methods of risk management, methods of statistics the authors of this paper proposed their own risk assessment method and the method of management of logistics chains. The proposed tool is a specific hybrid of solutions known from the literature. Results: The presented method has been successfully used within the frames of economic-mathematical model of industrial enterprises. Indicators of supply chain risks, including risks caused by supplier are considered in this paper. Authors formed a method of optimizing the level of supply chain risk in the integration with suppliers and customers. Conclusion: Every organization, which starting the process of integration with supplier and customers, needs to use tools, methodologies and techniques for identification of "weak links" in the supply chain. The proposed method allows to fix risk origin places in various links of the supply chain and to identify "weak links" of a logistic chain that may occur in the future. The method is a useful tool for managing not only risks and risk situations, but also to improve the efficiency of current assets management by providing the ability to optimize the level of risk in the current assets management of the industrial enterprise.

Flexibility evaluation of multiechelon supply chains.

Science.gov (United States)

Almeida, João Flávio de Freitas; Conceição, Samuel Vieira; Pinto, Luiz Ricardo; de Camargo, Ricardo Saraiva; Júnior, Gilberto de Miranda

2018-01-01

Multiechelon supply chains are complex logistics systems that require flexibility and coordination at a tactical level to cope with environmental uncertainties in an efficient and effective manner. To cope with these challenges, mathematical programming models are developed to evaluate supply chain flexibility. However, under uncertainty, supply chain models become complex and the scope of flexibility analysis is generally reduced. This paper presents a unified approach that can evaluate the flexibility of a four-echelon supply chain via a robust stochastic programming model. The model simultaneously considers the plans of multiple business divisions such as marketing, logistics, manufacturing, and procurement, whose goals are often conflicting. A numerical example with deterministic parameters is presented to introduce the analysis, and then, the model stochastic parameters are considered to evaluate flexibility. The results of the analysis on supply, manufacturing, and distribution flexibility are presented. Tradeoff analysis of demand variability and service levels is also carried out. The proposed approach facilitates the adoption of different management styles, thus improving supply chain resilience. The model can be extended to contexts pertaining to supply chain disruptions; for example, the model can be used to explore operation strategies when subtle events disrupt supply, manufacturing, or distribution.

Supply chain design: Some critical questions

Directory of Open Access Journals (Sweden)

J. D. Nel

2010-11-01

Full Text Available Effective supply chain management (SCM requires organisations to work together in order to satisfy the needs of their end customers. Since organisations have to determine which processes and relationships will best achieve this aim, the design of their supply chains is important. Supply chain design thus forms an integral part of SCM and embodies the supply chain's structure. Unfortunately, too many organisations allow the design of their supply chain to evolve into its current form instead of planning their supply chain design (SCD efforts. The literature is vague on what SCD efforts constitute. This article consists of a comprehensive literature study in which an effort was made to bring more clarity on exactly what purposeful SCD efforts consist of, and some key questions were formulated that organisations could use as a guide in their SCD practices. From these critical questions a conceptual framework has been developed that can be used to determine whether organisations' SCD practices are aligned with organisational objectives. The conceptual framework was tested at two South African organisations to determine if it indeed can be be used to analyse the SCD practices of organisations.

Negotiations in Supply Chain Management

DEFF Research Database (Denmark)

Zachariassen, Frederik

2008-01-01

negotiation literature. Subsequently, an empirical case study is presented, which explicitly aims at exploring the role of negotiations between members of a supply chain. Based on the findings, the paper concludes on specific, normative guidelines for negotiations for improved supply chain competitiveness...

Spatial Configuration of Macromolecular Chains

Indian Academy of Sciences (India)

where C reaches a constant value with increase in n for any series of finitely flexible chains. ... entirely free of overlaps between any pair of segments is very small for a long chain. The attrition of .... Excerpts froin Flory's Nobel Banquet Speech.

Realities of Supply Chain Collaboration

NARCIS (Netherlands)

Kampstra, R.P.; Ashayeri, J.; Gattorna, J.

2006-01-01

Successful supply chain collaboration (SCC) practices are rather exceptional, yet collaboration is believed to be the single most pressing need in supply chain management.In this paper we discuss the realities of SCC, present prerequisites for the collaboration process, indicate where the process

Electric Power Supply Chain Management Addressing Climate Change

DEFF Research Database (Denmark)

Wang, Xiao-Hui; Cong, Ronggang

2012-01-01

Supply chain management played a critical role in the electric power industrial chain optimization. The purpose of this paper was to review a sample of the literature relating to supply chain management and its possible applications in electricity power system, especially in the context of climate...... change. The study compared the difference between electric power supply chain management and traditional supply chain management. Furthermore, some possible research topics are addressed. The aim of this paper was to promote the application of supply chain management in the China electricity sector...

Serum Free Light Chains in Neoplastic Monoclonal Gammopathies: Relative Under-Detection of Lambda Dominant Kappa/Lambda Ratio, and Underproduction of Free Lambda Light Chains, as Compared to Kappa Light Chains, in Patients With Neoplastic Monoclonal Gammopathies.

Science.gov (United States)

Lee, Won Sok; Singh, Gurmukh

2018-07-01

Quantitative evaluation of serum free light chains is recommended for the work up of monoclonal gammopathies. Immunoglobulin light chains are generally produced in excess of heavy chains. In patients with monoclonal gammopathy, κ/λ ratio is abnormal less frequently with lambda chain lesions. This study was undertaken to ascertain if the levels of overproduction of the two light chain types and their detection rates are different in patients with neoplastic monoclonal gammopathies. Results of serum protein electrophoresis (SPEP), serum protein immunofixation electrophoresis (SIFE), urine protein electrophoresis (UPEP), urine protein immunofixation electrophoresis (UIFE), and serum free light chain assay (SFLCA) in patients with monoclonal gammopathies were examined retrospectively. The κ/λ ratios were appropriately abnormal more often in kappa chain lesions. Ratios of κ/λ were normal in about 25% of patients with lambda chain lesions in whom free homogenous lambda light chains were detectable in urine. An illustrative case suggests underproduction of free lambda light chains, in some instances. The lower prevalence of lambda dominant κ/λ ratio in lesions with lambda light chains is estimated to be due to relative under-detection of lambda dominant κ/λ ratio in about 25% of the patients and because lambda chains are not produced in as much excess of heavy chains as are kappa chains, in about 5% of the patients. The results question the medical necessity and clinical usefulness of the serum free light chain assay. UPEP/UIFE is under-utilized.

Strategic orientation in evaluation of supply chain activities

Directory of Open Access Journals (Sweden)

Javad sofiyabadi

2012-08-01

Full Text Available Employment of supply chain management could impact the entire functional and practical aspects of industry and services positively and change the manager’s attitude toward the implementation of supply chain management systems from a cost-oriented attitude to an enabling attitude towards better activities with other chain members. Yet still many organizations do not have the required vision within the identification of strategic appropriate measure in implementation, evaluation and usage of proper benchmarks to attain an integrated chain. Constantly supply chain management activity can be introduced as a tied up with strategic level of organization. Hence, it is a necessary with an overall strategic approach to identify the criteria, which enable us to include the whole process level of chain, financial matter of chain activities, visible and invisible properties, human activity and turn all these activities into an integrated approach to resolve supply chain difficulties. In this paper, we present an integrated balanced score card combined with DEMATEL technique to prioritize different alternatives for supply chain implementation.

Monitoring the vaccine cold chain.

OpenAIRE

Cheriyan, E

1993-01-01

Maintaining the vaccine cold chain is an essential part of a successful immunisation programme. A continuous electronic temperature monitor helped to identify breaks in the cold chain in the community and the study led to the issue of proper guidelines and replacement of faulty equipment.

The chain re-action

CERN Multimedia

2009-01-01

On 18 March, beam commissioning started in the first ‘link’ of the accelerator chain – LINAC 2. This marks the start of what will be the longest period of beam operations in CERN’s history, with the accelerator complex remaining operational throughout the winter to supply the LHC. The Bulletin finds out what is being done to make sure the whole chain is ready for this historic run.

Supply chain risk management

OpenAIRE

Christian Hollstein; Frank Himpel

2013-01-01

Background: Supply chain risk management increasingly gains prominence in many international industries. In order to strengthen supply chain structures, processes, and networks, adequate potentials for risk management need to be built (focus on effective logistics) and to be utilized (focus on efficient logistics). Natural-based disasters, such as the case of Fukushima, illustrate how crucial risk management is. Method: By aligning a theoretical-conceptual framework with empirical-induct...

Linking corporate strategy and supply chain management

OpenAIRE

Hofmann, Erik

2009-01-01

Purpose of this paper: The paper researches the linkages between corporate and supply chain strategy. It represents a stage of an on-going research initiative aimed at providing a framework for understanding systematically the integration of corporate strategy making and supply chain management. Design/methodology/approach: The paper engaged itself in the theory/literature related to strategic and supply chain management. Four generic levels of strategy are linked to supply chain ma...

Modern slavery challenges to supply chain management

OpenAIRE

Gold, Stefan; Trautrims, Alexander; Trodd, Zoe

2015-01-01

Purpose\\ud – This paper aims to draw attention to the challenges modern slavery poses to supply chain management. Although many international supply chains are (most often unknowingly) connected to slave labour activities, supply chain managers and researchers have so far neglected the issue. This will most likely change as soon as civil society lobbying and new legislation impose increasing litigation and reputational risks on companies operating international supply chains. \\ud \\ud Design/m...

Additive manufacturing technology in spare parts supply chain

DEFF Research Database (Denmark)

Li, Yao; Jia, Guozhu; Yang, Cheng

2017-01-01

Additive Manufacturing (AM) technology has the potential to significantly improve supply chain dynamics. The purpose of this paper is to investigate the impact of AM on spare parts supply chain. Three supply chain scenarios are investigated in this paper, namely conventional supply chain...

Who Manages Our Supply Chains?

DEFF Research Database (Denmark)

Flöthmann, Christoph

to manage the manifold tasks they face on a daily basis. Unfortunately, as globalization has simultaneously increased the complexity of supply chains and the demand for highly qualified personnel, companies are facing a significant undersupply of talent (Cottrill, 2010). Moreover, organizations appear......While managers in traditional management functions focus on developing strong expertise to become “specialists” in their own discipline, supply chain managers are a different species: They have to combine a cross-functional understanding of various business fields and multi-faceted competencies......-based dissertation is to address the research gap between human resource management (HRM) and supply chain management (SCM)....

Simulation and Analysis of Roller Chain Drive Systems

DEFF Research Database (Denmark)

Pedersen, Sine Leergaard

The subject of this thesis is simulation and analysis of large roller chain drive systems, such as e.g. used in marine diesel engines. The aim of developing a chain drive simulation program is to analyse dynamic phenomena of chain drive systems and investigate different design changes to the syst......The subject of this thesis is simulation and analysis of large roller chain drive systems, such as e.g. used in marine diesel engines. The aim of developing a chain drive simulation program is to analyse dynamic phenomena of chain drive systems and investigate different design changes...... mathematical models, and compare to the prior done research. Even though the model is developed at first for the use of analysing chain drive systems in marine engines, the methods can with small changes be used in general, as for e.g. chain drives in industrial machines, car engines and motorbikes. A novel...

Analysis of supply chain management of shallots in Medan

Science.gov (United States)

Alam, M. C.; Supriana, T.

2018-02-01

Supply chain is important for business. One of supply chain that needs to be studied is the shallots supply chain. Medan have high demand while the supply of shallots is limited. This study aims to analyze the flow of shallots supply chain distribution in Medan. The method used was survey by using questionnaires to shallots producers, collecting traders, distributors, traders as well as government involved in shallots supply chain. Descriptive analysis was used to explain the shallots supply chain distribution flow. The results showed that there are two shallots supply chain model in Medan that was local shallots model and imported shallots model. Local shallots model could be distinguished based on three producer area, those were models of Medan Marelan, Samosir, and Simalungun. Medan Marelan and Simalungun models have seven supply chains, while the Samosir Model has eight supply chains. This condition indicates that the local shallots supply chain management in Medan was not efficient because of the length of the distribution channel. Supply chain imported shallots was more efficient because it had a shorter distribution flow with five supply chains.

Knowledge management system for risk mitigation in supply chain uncertainty: case from automotive battery supply chain

Science.gov (United States)

Marie, I. A.; Sugiarto, D.; Surjasa, D.; Witonohadi, A.

2018-01-01

Automotive battery supply chain include battery manufacturer, sulphuric acid suppliers, polypropylene suppliers, lead suppliers, transportation service providers, warehouses, retailers and even customers. Due to the increasingly dynamic condition of the environment, supply chain actors were required to improve their ability to overcome various uncertainty issues in the environment. This paper aims to describe the process of designing a knowledge management system for risk mitigation in supply chain uncertainty. The design methodology began with the identification of the knowledge needed to solve the problems associated with uncertainty and analysis of system requirements. The design of the knowledge management system was described in the form of a data flow diagram. The results of the study indicated that key knowledge area that needs to be managed were the knowledge to maintain the stability of process in sulphuric acid process and knowledge to overcome the wastes in battery manufacturing process. The system was expected to be a media acquisition, dissemination and storage of knowledge associated with the uncertainty in the battery supply chain and increase the supply chain performance.

Analytic evidence of the equivalence of the alternating Heisenberg spin chain to the mixed spin (1, 1/2) Heisenberg chain

International Nuclear Information System (INIS)

Jiang Jianjun; Liu Yongjun; Tang Fei; Yang Cuihong

2011-01-01

We investigated the properties of the spin-1/2 ferromagnetic-antiferromagnetic-antiferromagnetic alternating Heisenberg chain using the spin-wave theory. The spin-wave excitation spectra, the sublattice magnetizations and the local bond energies of the model are calculated to be compared with the corresponding properties of the mixed spin (1, 1/2) chain for a range of α. The results demonstrate that all the properties show similar behaviours in the small α limit, so the properties of the mixed spin (1, 1/2) chain can be described using the spin-1/2 ferromagnetic-antiferromagnetic-antiferromagnetic alternating Heisenberg chain. -- Research Highlights: →The spin-wave excitation spectra, the sublattice magnetizations and the local bond energies of the spin-1/2 ferromagnetic-antiferromagnetic-antiferromagnetic alternating Heisenberg chain are calculated. →In the small α limit, the properties of the mixed spin (1,1/2) chain can be described using the spin-1/2 ferromagnetic-antiferromagnetic-antiferromagnetic alternating Heisenberg chain. →The spin-1/2 ferromagnetic-antiferromagnetic-antiferromagnetic alternating Heisenberg chain may be of interest for some real quasi-one-dimensional molecular magnetic materials.

Assessing complexity of supply chains: evidence from wholesalers

NARCIS (Netherlands)

de Leeuw, S.L.J.M.; Grotenhuis, R.; van Goor, A.R.

2013-01-01

Purpose: The purpose of this paper is to discuss complexity assessment in supply chains, to describe a methodology for measuring supply chain complexity in distributive trade and to illustrate the measurement of supply chain complexity and mechanisms to cope with supply chain complexity in

Designing value-creating supply chain networks

CERN Document Server

Martel, Alain

2016-01-01

Focusing on the design of robust value-creating supply chain networks (SCN) and key strategic issues related to the number; location, capacity and mission of supply chain facilities (plants, distribution centers) – as well as the network structure required to provide flexibility and resilience in an uncertain world – this book presents an innovative methodology for SCN reengineering that can be used to significantly improve the bottom line of supply chain dependent businesses. Providing readers with the tools needed to analyze and model value creation activities, Designing Value-Creating Supply Chain Networks examines the risks faced by modern supply chains, and shows how to develop plausible future scenarios to evaluate potential SCN designs. The design methods proposed are based on a visual representation formalism that facilitates the analysis and modeling of SCN design problems, book chapters incorporate several example problems and exercises which can be solved with Excel tools (Analysis tools and So...

Precast Pearl-Chain concrete arch bridges

DEFF Research Database (Denmark)

Halding, Philip Skov; Hertz, Kristian Dahl; Schmidt, Jacob Wittrup

2015-01-01

A Pearl-Chain Bridge is a closed-spandrel arch bridge consisting of a number of straight pre-fabricated so called Super-Light Deck elements put together in an arch shape by post-tensioning cables. Several Pearl-Chain arches can be positioned adjacent to each other by a crane to achieve a bridge...... of a desired width. On top of the arch is a filling material to level out the surface of the above road. The filling only transfers vertical loads to the arch. The geometry and material properties of Super-Light Decks are presented, and we refer to several fullscale tests of Pearl-Chain arches where...... the technology was used. We also study other important components and details in the Pearl-Chain Bridge concept and review the effects of different types of loads. A theoretical case study of a circular 30 m span Pearl-Chain Bridge is presented showing the influence of a number of parameters: The number of post...

Auto component supply chain: a path to global India

OpenAIRE

Kale, Shailendra; Palacios Fernández, Miguel; Tafur Segura, José Javier; Jarad, Rajendra; Chitale, C.M.

2011-01-01

Supply chain management works to bring the supplier, the distributor, and the customer into one cohesive process. The Supply Chain Council defined supply chain as ‘Supply Chain: The flow and transformation of raw materials into products from suppliers through production and distribution facilities to the ultimate consumer., and then Sunil Chopra and Meindl, (2001) have define Supply chain management as ‘Supply Chain Management involves the flows between and among stages in a supply chain to m...

Academic Education Chain Operation Model

NARCIS (Netherlands)

Ruskov, Petko; Ruskov, Andrey

2007-01-01

This paper presents an approach for modelling the educational processes as a value added chain. It is an attempt to use a business approach to interpret and compile existing business and educational processes towards reference models and suggest an Academic Education Chain Operation Model. The model

Performance measurement for supply chain management and evaluation criteria determination for reverse supply chain management

Science.gov (United States)

Kongar, N. Elif

2004-12-01

Today, since customers are able to obtain similar-quality products for similar prices, the lead time has become the only preference criterion for most of the consumers. Therefore, it is crucial that the lead time, i.e., the time spent from the raw material phase till the manufactured good reaches the customer, is minimized. This issue can be investigated under the title of Supply Chain Management (SCM). An efficiently managed supply chain can lead to reduced response time for customers. To achieve this, continuous observation of supply chain efficiency, i.e., a constant performance evaluation of the current SCM is required. Widely used conventional performance measurement methods lack the ability to evaluate a SCM since the supply chain is a dynamic system that requires a more thorough and flexible performance measurement technique. Balanced Scorecard (BS) is an efficient tool for measuring the performance of dynamic systems and has a proven capability of providing the decision makers with the appropriate feedback data. In addition to SCM, a relatively new management field, namely reverse supply chain management (RSCM), also necessitates an appropriate evaluation approach. RSCM differs from SCM in many aspects, i.e., the criteria used for evaluation, the high level of uncertainty involved etc., not allowing the usage of identical evaluation techniques used for SCM. This study proposes a generic Balanced Scorecard to measure the performance of supply chain management while defining the appropriate performance measures for SCM. A scorecard prototype, ESCAPE, is presented to demonstrate the evaluation process.

Quantifying Short-Chain Chlorinated Paraffin Congener Groups

NARCIS (Netherlands)

Yuan, Bo; Bogdal, Christian; Berger, Urs; MacLeod, Matthew; Gebbink, Wouter A.; Alsberg, Tomas; Wit, de Cynthia A.

2017-01-01

Accurate quantification of short-chain chlorinated paraffins (SCCPs) poses an exceptional challenge to analytical chemists. SCCPs are complex mixtures of chlorinated alkanes with variable chain length and chlorination level; congeners with a fixed chain length (n) and number of chlorines (m) are

The effect of problems on supply chain wide efficiency

Directory of Open Access Journals (Sweden)

Micheline J. Naude

2011-11-01

This article reports on an exploratory empirical study to illustrate the effect of problems at one party in the supply chain on the whole supply chain. The study was done at automotive component manufacturers. To determine how problems at one place permeate through the whole supply chain, correlation testing was done between supply-side, internal operations, and distribution or customer-side problems. The study found that problems experienced at one place in the supply chain had a negative impact throughout the supply chain. Automotive supply chains should therefore be managed more as a system, taking into consideration the effect of decision making and actions at one part of the supply chain on other parts of the supply chain. There should be a supply chain wide co-operative effort to find solutions to inefficiencies at all places in the supply chain.

Branched-chain fatty acid biosynthesis in a branched-chain amino acid aminotransferase mutant of Staphylococcus carnosus

DEFF Research Database (Denmark)

Beck, Hans Christian

2005-01-01

Fatty acid biosynthesis by a mutant strain of Staphylococcus carnosus deficient in branched-chain amino acid aminotransferase (IlvE) activity was analysed. This mutant was unable to produce the appropriate branched-chain alpha-ketoacid precursors for branched-chain fatty acid biosynthesis from...... in rich medium and growth in defined medium supplemented with 2-methylpropanoic acid lead to extensive alteration of the fatty acid composition in the cell membrane. In rich medium, a change from 51.7% to 17.1% anteiso-C15:0, and from 3.6% to 33.9% iso-C14:0 fatty acids as compared to the wild-type strain...... for 2-methylpropanoic acid production, revealing that the IlvE protein plays an important, but not essential role in the biosynthesis of branched-chain fatty acids and secondary metabolites in S. carnosus....

Flexibility evaluation of multiechelon supply chains.

Directory of Open Access Journals (Sweden)

João Flávio de Freitas Almeida

Full Text Available Multiechelon supply chains are complex logistics systems that require flexibility and coordination at a tactical level to cope with environmental uncertainties in an efficient and effective manner. To cope with these challenges, mathematical programming models are developed to evaluate supply chain flexibility. However, under uncertainty, supply chain models become complex and the scope of flexibility analysis is generally reduced. This paper presents a unified approach that can evaluate the flexibility of a four-echelon supply chain via a robust stochastic programming model. The model simultaneously considers the plans of multiple business divisions such as marketing, logistics, manufacturing, and procurement, whose goals are often conflicting. A numerical example with deterministic parameters is presented to introduce the analysis, and then, the model stochastic parameters are considered to evaluate flexibility. The results of the analysis on supply, manufacturing, and distribution flexibility are presented. Tradeoff analysis of demand variability and service levels is also carried out. The proposed approach facilitates the adoption of different management styles, thus improving supply chain resilience. The model can be extended to contexts pertaining to supply chain disruptions; for example, the model can be used to explore operation strategies when subtle events disrupt supply, manufacturing, or distribution.

Antiretroviral procurement and supply chain management.

Science.gov (United States)

Ripin, David J; Jamieson, David; Meyers, Amy; Warty, Umesh; Dain, Mary; Khamsi, Cyril

2014-01-01

Procurement, the country-level process of ordering antiretrovirals (ARVs), and supply chain management, the mechanism by which they are delivered to health-care facilities, are critical processes required to move ARVs from manufacturers to patients. To provide a glimpse into the ARV procurement and supply chain, the following pages provide an overview of the primary stakeholders, principal operating models, and policies and regulations involved in ARV procurement. Also presented are key challenges that need to be addressed to ensure that the supply chain is not a barrier to the goal of universal coverage. This article will cover the steps necessary to order and distribute ARVs, including different models of delivery, key stakeholders involved, strategic considerations that vary depending on context and policies affecting them. The single drug examples given illustrate the complications inherent in fragmented supply and demand-driven models of procurement and supply chain management, and suggest tools for navigating these hurdles that will ultimately result in more secure and reliable ARV provision. Understanding the dynamics of ARV supply chain is important for the global health community, both to ensure full and efficient treatment of persons living with HIV as well as to inform the supply chain decisions for other public health products.

Secure Supply Chains : Design Restrictions & Organizational Boundaries

NARCIS (Netherlands)

Ludema, M.W.

2009-01-01

An important issue in the design of secure supply chains is the understanding of the relation between supply chains and the organizational responsibility of specific parts of these supply chains. Organizational boundaries change over time by means of vertical and/or horizontal (des)-integration and

Consistency and refinement for Interval Markov Chains

DEFF Research Database (Denmark)

Delahaye, Benoit; Larsen, Kim Guldstrand; Legay, Axel

2012-01-01

Interval Markov Chains (IMC), or Markov Chains with probability intervals in the transition matrix, are the base of a classic specification theory for probabilistic systems [18]. The standard semantics of IMCs assigns to a specification the set of all Markov Chains that satisfy its interval...

Demand chain management — The implementation | Ericsson ...

African Journals Online (AJOL)

Most current supply chain models were developed during a period of relative stability. Today, the environment is discontinuous, volatile and unpredictable. This requires a major rethinking and revitalisation of existing supply chain models. Supply chains are much more than warehouses, transportation and technology, they ...

Bio-based supply chains : risks and institutional arrangements

NARCIS (Netherlands)

Peerlings, J.H.M.; Ge, L.; Galen, van M.A.

2012-01-01

One of the challenges for the bio-based economy is to achieve production efficiency that can compete with fossil-based products. New scale-efficient product supply chains have to be created, or current supply chains have to be amended to incorporate the biomass supply chain. These new supply chains

Performance evaluation on aquatic product cold-chain logistics

Directory of Open Access Journals (Sweden)

Wenbing Wu

2015-11-01

Full Text Available Purpose: The requirements for high quality and diversification aquatic products are increasing with the improvement of Chinese living standard. However, the distribution between place of production and place of consumption are uneven, which results in large cold-chain logistics demand for aquatic products. At present, the low-level development of cold chain logistics has a bad impact on the circulation of aquatic products in China. So it is very urgent to develop cold-chain logistics in China. Design/methodology/approach: In order to do this, we apply performance evaluation, a well-known management tool, to study Chinese aquatic product cold-chain logistics. In this paper we first propose SISP(Subjects, Indexes, Standards, and Phases of performance evaluation model and ACSSN model(Aquatic product, Customer, Supply Chain, Society, and Node enterprises of supply chain for aquatic products cold-chain logistics performance evaluation. Then an ANP-Fuzzy method is proposed to evaluate the operational performance of Shandong Oriental Ocean Sci-Tech Co., Ltd. Furthermore, a system dynamic model is built to simulate the impact of temperature on the profits in aquatic products cold-chain sales section. Findings: We find out within a reasonable temperature range, lower temperature brings higher profit level. Also, performance improvement methods are proposed and the simulation of performance evaluation system is developed. Practical implications: Our findings can help to improve the level of aquatic product cold-chain logistics in China. Originality/value: The paper proposes the SISP (Subjects, Indexes, Standards, and Phases of performance evaluation model and ACSSN model (Aquatic product, Customer, Supply Chain, Society, and Node enterprises of supply chain for aquatic products cold-chain logistics performance evaluation.

Leading a supply chain turnaround.

Science.gov (United States)

Slone, Reuben E

2004-10-01

Just five years ago, salespeople at Whirlpool were in the habit of referring to their supply chain organization as the "sales disablers." Now the company excels at getting products to the right place at the right time--while managing to keep inventories low. How did that happen? In this first-person account, Reuben Slone, Whirlpool's vice president of Global Supply Chain, describes how he and his colleagues devised the right supply chain strategy, sold it internally, and implemented it. Slone insisted that the right focal point for the strategy was the satisfaction of consumers at the end of the supply chain. Most supply chain initiatives do the opposite: They start with the realities of a company's manufacturing base and proceed from there. Through a series of interviews with trade customers large and small, his team identified 27 different capabilities that drove industry perceptions of Whirlpool's performance. Knowing it was infeasible to aim for world-class performance across all of them, Slone weighed the costs of excelling at each and found the combination of initiatives that would provide overall competitive advantage. A highly disciplined project management office and broad training in project management were key to keeping work on budget and on benefit. Slone set an intense pace--three "releases" of new capabilities every month--that the group maintains to this day. Lest this seem like a technology story, however, Slone insists it is just as much a "talent renaissance." People are proud today to be part of Whirlpool's supply chain organization, and its new generation of talent will give the company a competitive advantage for years to come.

Chained function filters - theory and applications.

OpenAIRE

Chrisostomidis, Christos E.

2003-01-01

For the first time, the new class of filter transfer functions, called Chained Functions is described, in detail. With Chained functions, one may define a new polynomial generating function that is given by the product of a combination of low order functions, called seed functions. The chained function concept provides with a variety of transfer functions, having the same order but different frequency-domain, time-domain and implementation characteristics. When compared to the conventional Ch...

Entanglement of periodic anisotropic XY chains

International Nuclear Information System (INIS)

Zhang Lifa; Tong Peiqing

2005-01-01

By using the concept of concurrence, the entanglement of periodic anisotropic XY chains in a transverse field is studied numerically. It is found that the derivatives ∂ λ C(1) of nearest-neighbour concurrence diverge at quantum critical points. By proper scaling, we found that all the derivatives ∂ λ C(1) for periodic XY chains in the vicinity of quantum critical points have the same behaviours as that of a uniform chain

Vibroplasty for mixed and conductive hearing loss.

Science.gov (United States)

Luers, Jan Christoffer; Hüttenbrink, Karl-Bernd; Zahnert, Thomas; Bornitz, Matthias; Beutner, Dirk

2013-08-01

To summarize new application methods of an active middle ear implant (Vibrant Soundbridge) in patients with conductive or mixed hearing loss. Publications listed in the Medline/PubMed database. All publications published in English language; search term Vibrant Soundbridge AND floating mass transducer in all fields. Structured analysis of all publications. Extraction of significant findings and conclusions and audiometric data. Modern application methods of an active middle ear implant (VSB) open new therapeutic options for patients with various outer and middle ear diseases resulting in conductive or mixed hearing loss. Titanium couplers can help to couple the active middle ear implant in a standardized way to remnants of the ossicular chain or to the round window. Thus, the active middle ear implant has been established as an alternative treatment option for patients with mixed and conductive hearing. However, the heterogeneity of the studies published so far complicates the analysis of the audiometric results, and thus, the functional hearing gain after VSB implantation varies a lot.

Secure information sharing in digital supply chains

NARCIS (Netherlands)

Bhargava, B.; Ranchal, R.; Ben Othmane, L.; Kalra, B.M.

2013-01-01

Modern organizations interact with their partners through digital supply chain business processes for producing and delivering products and services to consumers. A partner in this supply chain can be a sub-contractor to whom work is outsourced. Each partner in a supply chain uses data, generates

Implementasi Knowledge Management dalam Sistem Supply Chain Agroindustri

Directory of Open Access Journals (Sweden)

Evi Savitri Iriani

2017-03-01

Full Text Available Knowledge Management (KM and supply chain is a new approach used by many companies to create value, increase organizational effectivity and productivity, and competitiveness. However, this concept is still rarely used in agroindustry. The integration of KM and supply chain is very important. A supply chain which applies knowledge managemen system in all the chains will get the final value larger than the total values of all chains, and thus improve competitiveness f the product. The application of KM is initiated by collecting information from supply chain system which were then analysed and shared with all of the components of all chains to support decision making process. A key of success in the implementation of KM is knowledge sharing among components within the system. Another important factor is leadership to support the implementation of KM and colaboration with other parties

Wal-Mart's Successfully Integrated Supply Chain and the Necessity of Establishing the Triple-A supply Chain in the 21st century

OpenAIRE

Ha Nguyen Thi Thu

2017-01-01

Aim/purpose - The main purposes of the paper are to analyze features creating a Wal-Mart's successful integrated supply chain that contributes its dominant position in the retail market and identify issues existing in Wal-Mart's supply chain. Then some suggestions will be mentioned for Wal-Mart to establish the Triple-A supply chain. Methodology - This paper is based on literature studies for reviewing Wal-Mart's integrated supply chain and designing an ideal Triple-A supply chain. Findings -...

Den teoretiske udvikling af Supply Chain Strategimodeller

DEFF Research Database (Denmark)

Arvad Johansen, Jens

2011-01-01

segmentering via postponement-princippet, har givet mærkbare forbedringer. Det beskrives endvidere, hvordan produkternes livscyklus påvirker valget af supply chain design. Begrebet Demand Chain Management( DCM), hvormed strategimodeller bruger klassiske marketingelementer sammen med Supply Chain Management...... (SCM), bliver behandlet og der udvikles en DCM-strategimodel....

Supply chain quality management

Directory of Open Access Journals (Sweden)

Hannan Amoozad Mahdiraji

2012-10-01

Full Text Available In recent years, there are several methods introduced for the improvement of operational performances. Total quality management and supply chain management are two methods recommended for this purpose. These two approaches have been studied in most researches separately, while they have objectives in common, and this makes them a strategic means, which can be used, simultaneously. Total quality management and supply chain management play significant roles to increase the organizational competitiveness power. Moreover, they have only one purpose that is customer satisfaction, and they are different only on their approaches to reach their objectives. In this research, we aim to study both approaches of quality management and supply chain, their positive increasing effects that may be generated after their integration. For this purpose, the concept and definitions of each approach is studied, independently, their similarities and differences are recognized, and finally, the advantages of their integration are introduced.

Investigations of model polymers: Dynamics of melts and statics of a long chain in a dilute melt of shorter chains

International Nuclear Information System (INIS)

Bishop, M.; Ceperley, D.; Frisch, H.L.; Kalos, M.H.

1982-01-01

We report additional results on a simple model of polymers, namely the diffusion in concentrated polymer systems and the static properties of one long chain in a dilute melt of shorter chains. It is found, for the polymer sizes and time scales amenable to our computer calculations, that there is as yet no evidence for a ''reptation'' regime in a melt. There is some indication of reptation in the case of a single chain moving through fixed obstacles. No statistically significant effect of the change, from excluded volume behavior of the long chain to ideal behavior as the shorter chains grow, is observed

Spectral methods for quantum Markov chains

Energy Technology Data Exchange (ETDEWEB)

Szehr, Oleg

2014-05-08

The aim of this project is to contribute to our understanding of quantum time evolutions, whereby we focus on quantum Markov chains. The latter constitute a natural generalization of the ubiquitous concept of a classical Markov chain to describe evolutions of quantum mechanical systems. We contribute to the theory of such processes by introducing novel methods that allow us to relate the eigenvalue spectrum of the transition map to convergence as well as stability properties of the Markov chain.

Finding gold in the supply chain.

Science.gov (United States)

Caudle, Allen

2009-12-01

To optimize supply chain performance and achieve savings that enhance the bottom line, hospitals should: Generate purchase orders for every item purchased. Ensure the organization is protected from undue vendor influence. Keep track of where supply chain dollars are going. Review contracts regularly to ensure competitiveness. Have a contract for each product category. Buy only what the organization is sure to use. Get rid of excess inventory. Develop a strategic plan for continued supply chain savings.

Spectral methods for quantum Markov chains

International Nuclear Information System (INIS)

Szehr, Oleg

2014-01-01

The aim of this project is to contribute to our understanding of quantum time evolutions, whereby we focus on quantum Markov chains. The latter constitute a natural generalization of the ubiquitous concept of a classical Markov chain to describe evolutions of quantum mechanical systems. We contribute to the theory of such processes by introducing novel methods that allow us to relate the eigenvalue spectrum of the transition map to convergence as well as stability properties of the Markov chain.

Integrable multiparametric quantum spin chains

CERN Document Server

Förster, A; Roditi, I; Foerster, Angela; Links, Jon; Roditi, Itzhak

1998-01-01

Using Reshetikhin's construction for multiparametric quantum algebras we obtain the associated multiparametric quantum spin chains. We show that under certain restrictions these models can be mapped to quantum spin chains with twisted boundary conditions. We illustrate how this general formalism applies to construct multiparametric versions of the supersymmetric t-J and U models.

Chains versus Independents: Newspaper and Market Characteristics.

Science.gov (United States)

Hale, F. Dennis

A study examined the marketing differences between large chain newspapers and small chain and independent newspapers by analyzing differences in characteristics of the newspapers, patterns of circulation, economic and social conditions of the market, and competition from other print media. The 200 newspapers studied--113 large chain and 87 small…

Extending the "Knowledge Advantage": Creating Learning Chains

Science.gov (United States)

Maqsood, Tayyab; Walker, Derek; Finegan, Andrew

2007-01-01

Purpose: The purpose of this paper is to develop a synergy between the approaches of knowledge management in a learning organisation and supply chain management so that learning chains can be created in order to unleash innovation and creativity by managing knowledge in supply chains. Design/methodology/approach: Through extensive literature…

Side Chain Engineering in Solution-Processable Conjugated Polymers

KAUST Repository

Mei, Jianguo

2014-01-14

Side chains in conjugated polymers have been primarily utilized as solubilizing groups. However, these side chains have roles that are far beyond. We advocate using side chain engineering to tune a polymer\\'s physical properties, including absorption, emission, energy level, molecular packing, and charge transport. To date, numerous flexible substituents suitable for constructing side chains have been reported. In this Perspective article, we advocate that the side chain engineering approach can advance better designs for next-generation conjugated polymers. © 2013 American Chemical Society.

Step Density Profiles in Localized Chains

Science.gov (United States)

De Roeck, Wojciech; Dhar, Abhishek; Huveneers, François; Schütz, Marius

2017-06-01

We consider two types of strongly disordered one-dimensional Hamiltonian systems coupled to baths (energy or particle reservoirs) at the boundaries: strongly disordered quantum spin chains and disordered classical harmonic oscillators. These systems are believed to exhibit localization, implying in particular that the conductivity decays exponentially in the chain length L. We ask however for the profile of the (very slowly) transported quantity in the steady state. We find that this profile is a step-function, jumping in the middle of the chain from the value set by the left bath to the value set by the right bath. This is confirmed by numerics on a disordered quantum spin chain of 9 spins and on much longer chains of harmonic oscillators. From theoretical arguments, we find that the width of the step grows not faster than √{L}, and we confirm this numerically for harmonic oscillators. In this case, we also observe a drastic breakdown of local equilibrium at the step, resulting in a heavily oscillating temperature profile.

Screened ion-ion interaction in mercury-chain compounds: Single chain

International Nuclear Information System (INIS)

Mohan, M.M.; Griffin, A.

1985-01-01

At room temperature, the mercury chains in Hg/sub 3-delta/AsF 6 exhibit phonons characteristic of a one-dimensional lattice. We calculate the screening of the Hg ion-ion interaction in a single chain by electrons moving in a cylindrical potential of finite radius, within the random-phase approximation. The resulting Bohm-Staver-type expression for the phonon velocity is (Z 2 mN/sub I//MN/sub e/)/sup 1/2/v/sub F/, where Z is the Hg ionic charge and N/sub I/ (N/sub e/) is the number of ions (electrons) per unit length. Use of the Tomonaga-Luttinger solution for the electronic response function (keeping only the small-momentum scattering processes) just renormalizes the Fermi velocity in this expression

Integration of Forestry Industrial Chain in China

OpenAIRE

Lan, Zhanzhan; Wang, Liqun

2013-01-01

Based on the Smile Curve and Michael E. Porter’ value chain model, this paper points out that China’s forestry industry stays at the low end of the value chain for a long time. Raw materials are imported from foreign countries and also sold in foreign countries. Then, the authors analyze characteristics and existing problems of China’s forestry industrial chain. They put forward the development direction of China’s forestry industrial chain with reference to International Paper Compan...

Exploration Supply Chain Simulation

Science.gov (United States)

2008-01-01

The Exploration Supply Chain Simulation project was chartered by the NASA Exploration Systems Mission Directorate to develop a software tool, with proper data, to quantitatively analyze supply chains for future program planning. This tool is a discrete-event simulation that uses the basic supply chain concepts of planning, sourcing, making, delivering, and returning. This supply chain perspective is combined with other discrete or continuous simulation factors. Discrete resource events (such as launch or delivery reviews) are represented as organizational functional units. Continuous resources (such as civil service or contractor program functions) are defined as enabling functional units. Concepts of fixed and variable costs are included in the model to allow the discrete events to interact with cost calculations. The definition file is intrinsic to the model, but a blank start can be initiated at any time. The current definition file is an Orion Ares I crew launch vehicle. Parameters stretch from Kennedy Space Center across and into other program entities (Michaud Assembly Facility, Aliant Techsystems, Stennis Space Center, Johnson Space Center, etc.) though these will only gain detail as the file continues to evolve. The Orion Ares I file definition in the tool continues to evolve, and analysis from this tool is expected in 2008. This is the first application of such business-driven modeling to a NASA/government-- aerospace contractor endeavor.

Evolution of topological features in finite antiferromagnetic Heisenberg chains

International Nuclear Information System (INIS)

Chen Changfeng

2003-01-01

We examine the behavior of nonlocal topological order in finite antiferromagnetic Heisenberg chains using the density matrix renormalization group techniques. We find that chains with even and odd site parity show very different behavior in the topological string order parameter, reflecting interesting interplay of the intrinsic magnetic correlation and the topological term in the chains. Analysis of the calculated string order parameter as a function of the chain length and the topological angle indicates that S=1/2 and S=1 chains show special behavior while all S>1 chains have similar topological structure. This result supports an earlier conjecture on the classification of quantum spin chains based on an analysis of their phase diagrams. Implications of the topological behavior in finite quantum spin chains are discussed

40 CFR 264.276 - Food-chain crops.

Science.gov (United States)

2010-07-01

...) Describe the procedures used in conducting any tests, including the sample selection criteria, sample size... 40 Protection of Environment 25 2010-07-01 2010-07-01 false Food-chain crops. 264.276 Section 264... Treatment § 264.276 Food-chain crops. The Regional Administrator may allow the growth of food-chain crops in...

The Advancement Value Chain: An Exploratory Model

Science.gov (United States)

Leonard, Edward F., III

2005-01-01

Since the introduction of the value chain concept in 1985, several varying, yet virtually similar, value chains have been developed for the business enterprise. Shifting to higher education, can a value chain be found that links together the various activities of advancement so that an institution's leaders can actually look at the philanthropic…

Virtualization of work in global supply chains

Directory of Open Access Journals (Sweden)

Sabina Wyrwich-Płotka

2016-12-01

Full Text Available Background: The paper is devoted to the notion and benefits of implementing virtual work in global supply chains. Virtual work must be understood as an intentional activity of a human being, aimed at rendering services (tangible and intangible, by means of ITC tools, performed in a distance from the traditional place of work, in a mobile manner. The empirical research were conducted on the basis of 4 case studies of global leaders of supply chains, which in accordance with M. Fisher's classification, represent two types. The case studies confirmed the positive influence of virtual work both in effective and flexible supply chains. Favourable market and technological conditions and increasing awareness of benefits of virtual work will make it more and more widespread in companies comprising global supply chains. The aim of the study is to demonstrate the cause and effect relationships between virtual work and competitiveness of efficient and flexible supply chain. Methods: The paper is based on the available recent scientific-theoretical research and publication.  The authors analyzed 4 enterprises in Poland. The enterprises representing a flexible or an effective supply chain, either using or not a virtual work. The study carried out the authors had the form of individual interviews. The authors used case studies to show that virtual work brings notable benefits in an effective and flexible supply chain.  Results: Based on these case studies, the authors demonstrated reasons to implement virtual work in selected enterprises. The reasons to implement virtual work are determinants of possible achieve economies in effective and flexible supply chain Conclusions: The examined case studies show that virtual work brings different benefits. In the effective supply chain, virtual workers enable to increase effectiveness and financial results for example. In the flexible supply chain the virtual work can be a way to maintain and build long

Levels & Barriers to Supply Chain Integration: A conceptual model of Supply Chain Performance

OpenAIRE

RajaIrfan Sabir; Muhammad Irfan

2014-01-01

In modern business scenario Supply chain has become the back bone for every business organization. All supply chain partners are joined together in value delivery network of company that no one can perform better without support of other. The ultimate objective of this cohesive relationship is to deliver value to customers and gets desired state of customer satisfaction & loyalty for the organization. For this purpose it is necessary to integrate the internal and external partners of Supply c...

Performance Modeling of Communication Networks with Markov Chains

CERN Document Server

Mo, Jeonghoon

2010-01-01

This book is an introduction to Markov chain modeling with applications to communication networks. It begins with a general introduction to performance modeling in Chapter 1 where we introduce different performance models. We then introduce basic ideas of Markov chain modeling: Markov property, discrete time Markov chain (DTMe and continuous time Markov chain (CTMe. We also discuss how to find the steady state distributions from these Markov chains and how they can be used to compute the system performance metric. The solution methodologies include a balance equation technique, limiting probab

Green supply chain management : a study of green supply chain management within the pulp and paper industry

OpenAIRE

Anker-Rasch, Trine-Lise; Sørgard, Siri Daviknes

2011-01-01

The objective of this thesis is to create a framework that can be used by supply chains, in particular supply chains from the pulp and paper industry, to identify internal strengths and weaknesses and external opportunities and threats to develop environmental strategies. To identify which questions to use in the environmental strategy framework, we first identified the environmental picture which the pulp and paper industry is facing. We then used this and the theory of green supply chain...

The value of supply chain coordination under moral hazard: A case study of the consumer product supply chain.

Science.gov (United States)

Lee, Yumi; Song, Sang Hwa; Cheong, Taesu

2018-01-01

In this paper, we examine a real-world case related to the consumer product supply chain to analyze the value of supply chain coordination under the condition of moral hazard. Because of the characteristics of a buyback contract scheme employed in the supply chain, the supplier company's sales department encourages retailers to order more inventory to meet their sales target, whereas retailers pay less attention to their inventory level and leftovers at the end of the season. This condition induces moral hazard problems in the operation of the supply chain, as suppliers suffer from huge returns of leftover inventory. This, in turn, is related to the obsolescence of returned inventory, even with penalty terms in the contract for the return of any leftovers. In this study, we show under the current buyback-based supply chain operation, the inventory levels of both the supplier and retailers exceed customer demand and develop vendor-managed inventory (VMI) system with base stock policy to remove any mismatch of supply and demand. A comparison of both systems shows that through the proper coordination of supply chain operations, both suppliers and retailers can gain additional benefits while providing proper services to end customers.

Technical Aspects of Cyber Kill Chain

OpenAIRE

Yadav, Tarun; Mallari, Rao Arvind

2016-01-01

Recent trends in targeted cyber-attacks has increased the interest of research in the field of cyber security. Such attacks have massive disruptive effects on rganizations, enterprises and governments. Cyber kill chain is a model to describe cyber-attacks so as to develop incident response and analysis capabilities. Cyber kill chain in simple terms is an attack chain, the path that an intruder takes to penetrate information systems over time to execute an attack on the target. This paper broa...

Investigating and evaluating the influcence of supply chain structure on supply chain risk

Directory of Open Access Journals (Sweden)

Sayed, Zehran

2016-11-01

Full Text Available Supply chains are exposed to disruptions resulting from internal or external factors that hinder the performance of one or more of their constituent entities. An exploratory study was conducted to determine whether supply chain structure (SCS influences supply chain risk (SCR, in the context of small and medium enterprises (SMEs in South Africa. Thematic content analysis was applied to the case data of four Gauteng-based manufacturing SMEs (SMMEs, and summarised in a literature-developed, conceptual structure-risk framework. Results indicate that SCS does influence SCR. Investment in facility infrastructure and supplier relationships appear to be the most influential features. SCS also affects the operational and financial risk of an enterprise. These risks drive the SMEs’ strategy and reputation, and consequently drive the corresponding risk dimensions (i.e., strategic and reputation risks. These findings are limited, and should not be generalised to all South African SMEs.

Direct observation of the edge spin structure and chain length dependence of a finite haldane chain by high field ESR measurements

International Nuclear Information System (INIS)

Yoshida, Makoto; Ohta, Hitoshi; Ito, Toshimitsu; Ajiro, Yoshitami

2006-01-01

We have performed high field and multi-frequency ESR measurements of finite length S=1 antiferromagnetic chains in Y 2 BaNi 0.96 Mg 0.04 O 5 . Owing to the high spectral resolution by high fields and high frequencies, observed ESR signals can be separated into the contributions of the finite chains with various chain lengths. Our results clearly show that the edge spins actually interact with each other through the quantum spin chain and the interaction depends on the chain length N. (author)

Integrating product design into the supply chain

DEFF Research Database (Denmark)

Khan, Omera; Stolte, Terje; Creazza, Alessandro

2016-01-01

into the supply chain. Originality/Value: This paper provides novel insights to both practitioners and researchers. For practitioners detailed recommendations are given on how they can maximise benefits through integrating product design into the supply chain. The RBV has been harnessed to highlight how......Purpose: The aim of the research is to illustrate how companies can create competitive capabilities through integration of product design into the supply chain. In doing so the paper reveals the challenges and the opportunities that companies face when integrating product design and supply chain...... of opportunities and challenges when integrating product design and the supply chain and subsequently a step-by-step guide is developed to address these. Practical Implications: The research provides key recommendations to companies on how to create competitive capabilities by integrating product design...

Integrating product design into the supply chain

DEFF Research Database (Denmark)

Khan, Omera; Stolte, Terje; Creazza, Alessandro

2016-01-01

Purpose: The aim of the research is to illustrate how companies can create competitive capabilities through integration of product design into the supply chain. In doing so the paper reveals the challenges and the opportunities that companies face when integrating product design and supply chain...... of opportunities and challenges when integrating product design and the supply chain and subsequently a step-by-step guide is developed to address these. Practical Implications: The research provides key recommendations to companies on how to create competitive capabilities by integrating product design...... into the supply chain. Originality/Value: This paper provides novel insights to both practitioners and researchers. For practitioners detailed recommendations are given on how they can maximise benefits through integrating product design into the supply chain. The RBV has been harnessed to highlight how...

Haldane-Shastry spin chains of BCN type

International Nuclear Information System (INIS)

Enciso, A.; Finkel, F.; Gonzalez-Lopez, A.; Rodriguez, M.A.

2005-01-01

We introduce four types of SU(2M+1) spin chains which can be regarded as the BCN versions of the celebrated Haldane-Shastry chain. These chains depend on two free parameters and, unlike the original Haldane-Shastry chain, their sites need not be equally spaced. We prove that all four chains are solvable by deriving an exact expression for their partition function using Polychronakos's 'freezing trick'. From this expression we deduce several properties of the spectrum, and advance a number of conjectures that hold for a wide range of values of the spin M and the number of particles. In particular, we conjecture that the level density is Gaussian, and provide a heuristic derivation of general formulas for the mean and the standard deviation of the energy

Carbon 14 in the aquatic food chain

International Nuclear Information System (INIS)

Mueller, H.; Fischer, E.

1983-01-01

In the links of the food chain consisting of water, water plants, and fish from 6 several aquatic ecosystems, the specific C-14 activity of the carbon was determined from 1979 to 1981 and compared with values of the terrestrial food chain. The mean values obtained from the specific acitivities of the links were between 203 and 321 mBq/g C (5.5 and 8.7 pCi/g C). Four of the six mean values differ from the values for the terrestrial food chain of 260 to 240 mBg/g C (7.0 to 6.5 pCi/g C) investigated for 1979 to 1980. The specific-acitivity model is valid for the aquatic food chain only if atmosphere and man are not included as chain links. (orig.) [de

Plasmon-Polariton Properties in Metallic Nanosphere Chains

Directory of Open Access Journals (Sweden)

Witold Aleksander Jacak

2015-06-01

Full Text Available The propagation of collective wave type plasmonic excitations along infinite chains of metallic nanospheres has been analyzed, including near-, medium- and far-field contributions to the plasmon dipole interaction with all retardation effects taken into account. It is proven that there exist weakly-damped self-modes of plasmon-polaritons in the chain for which the propagation range is limited by relatively small Ohmic losses only. In this regime, the Lorentz friction irradiation losses on each nanosphere in the chain are ideally compensated by the energy income from the rest of the chain. The completely undamped collective waves were identified in the case of the presence of persistent external excitation of some fragment of the chain. The obtained characteristics of these excitations fit the experimental observations well.

Alignment of Information Systems with Supply Chains: Impacts on Supply Chain Performance and Organizational Performance

Science.gov (United States)

Qrunfleh, Sufian M.

2010-01-01

Over the past decade, an important focus of researchers has been on supply chain management (SCM), as many organizations believe that effective SCM is the key to building and sustaining competitive advantage for their products/services. To manage the supply chain, companies need to adopt an SCM strategy (SCMS) and implement appropriate SCM…

Supply chain finance

Directory of Open Access Journals (Sweden)

Kasavica Petar

2014-01-01

Full Text Available The concept of supply chain finance is a response to global illiquidity, intensified through the global economic crisis and globalization of commercial and financial flows. The growing illiquidity undermines credit ratings of economic entities, thereby reducing the potential for achieving the projected goals (profitability and portfolio quality. In order to overcome this, banks have introduced certain products flexible to the requirements of specific transactions. The concerned products redirect the focus from a client's credit rating and risk to the credit rating and risk of a business partner (buyer, resulting in benefits for all transaction participants ('win-win-win'. Moreover, the activities are targeted at transaction analysis, i.e. the isolation and protection of the cash flow as the source of financial instrument's repayment. On the other hand, there has been an increasing number of transactions based on the risk of the commercial bank of the client's business partner, or on the risk of collateral (inventory. The focus is actually placed on the financing of adequate supply chain stages, given that counterparty relationship management has been proven to be crucial for efficient management of one's own business. The tensions existing in the relations between partners (increasingly long payment deadlines are in the basis of the supply chain finance concept. Decisions made by banks are based on the entire supply chain (wide information basis, thereby shifting the focus from the product (as was the case before the crisis to the client's needs. Thus, decisions become increasingly comprehensive, quicker, and more precise, and portfolios less risky. Through the individual portfolio of banks, the market of national economies also becomes safer and more liquid. These are rather profitable transactions, because, due to the risk transfer, financing is enabled to companies to whom classic crediting in most cases is not available.

Tubulointerstitial nephritis accompanying gamma-heavy chain deposition and gamma-heavy chain restricted plasma cells in the kidney.

Science.gov (United States)

Nayer, Ali; Green, Dollie F; Gonzalez-Suarez, Maria L; Sujoy, Victoria; Ikpatt, Offiong F; Thomas, David B

2014-09-01

Monoclonal immunoglobulin heavy chain (HC) diseases are rare proliferative disorders of B lymphocytes or plasma cells characterized by the presence of monoclonal α-, µ-, or γ-HC without associated light chains in the blood, urine, or both. We report a 59-year-old woman with a history of Hodgkin disease who developed hypercalcemia, proteinuria, and impaired kidney function. Protein electrophoresis and immunofixation displayed γ-HC without associated light chains in the serum and urine. Pathologic examination demonstrated severe tubulointerstitial nephritis associated with diffuse and strong linear staining of the glomerular and tubular basement membranes as well as Bowman capsules for γ-HC, but not for κ- or λ-light chains. Immunohistochemical examination of the kidney and bone marrow demonstrated numerous CD138+ plasma cells immunoreactive for γ-HC, but not for κ- or λ-light chains. This is the first report of tubulointerstitial nephritis associated with γ-HC deposition and γ-HC restricted plasma cells in the kidney. This report heightens awareness about tubulointerstitial nephritis as a possible manifestation of γ-HC deposition in the kidney.

Linear-chain assemblies of iron oxide nanoparticles

Energy Technology Data Exchange (ETDEWEB)

Dhak, Prasanta; Kim, Min-Kwan; Lee, Jae Hyeok; Kim, Miyoung; Kim, Sang-Koog, E-mail: sangkoog@snu.ac.kr

2017-07-01

Highlights: • Hydrothermal synthesis of pure phase 200 nm Fe{sub 3}O{sub 4} nanoparticles. • Studies of linear-chain assemblies of iron oxide nanosphere by FESEM. • Micromagnetic simulations showed the presence of 3D vortex states. • The B.E. for different numbers of particles in linear chain assemblies were calculated. - Abstract: We synthesized iron oxide nanoparticles using a simple hydrothermal approach and found several types of segments of their linear-chain self-assemblies as observed by field emission scanning electron microscopy. X-ray diffraction and transmission electron microscopy measurements confirm a well-defined single-phase FCC structure. Vibrating sample magnetometry measurements exhibit a ferromagnetic behavior. Micromagnetic numerical simulations show magnetic vortex states in the nanosphere model. Also, calculations of binding energies for different numbers of particles in the linear-chain assemblies explain a possible mechanism responsible for the self-assemblies of segments of the linear chains of nanoparticles. This work offers a step towards linear-chain self-assemblies of iron oxide nanoparticles and the effect of magnetic vortex states in individual nanoparticles on their binding energy.

Spatial Configuration of Macromolecular Chains

Indian Academy of Sciences (India)

where C reaches a constant value with increase in n for any series of finitely flexible chains. The smoothed density within the domain of a linear macromolecule having a molecular weight of 100,000 or greater (i.e., n > 1000) is low, only on the order of one percent or less of the space being occupied by chain segments.

Defect-induced conductance oscillations in short atomic chains

International Nuclear Information System (INIS)

Wawrzyniak-Adamczewska, M; Kostyrko, T

2012-01-01

Electronic transport through a junction made of two gold electrodes connected with a gold chain containing a silver impurity is analyzed with a tight binding model and the density-functional theory. It is shown that the conductance depends in a simple way on the position of the impurity in the chain and the parity of the total number of atoms of the chain. For an odd chain the conductance takes on a higher value when the Ag impurity substitutes an even Au atom in the chain, and a lower one for an odd position of the Ag atom. In the case of an even chain the conductance hardly depends on the position of the Ag atom. This new kind of a defect-induced parity oscillation of the conductance is significantly more prominent than the well-known even-odd effect related to the dependence of the conductance on the parity of number of atoms in perfect chains. (paper)

Approximate quantum Markov chains

CERN Document Server

Sutter, David

2018-01-01

This book is an introduction to quantum Markov chains and explains how this concept is connected to the question of how well a lost quantum mechanical system can be recovered from a correlated subsystem. To achieve this goal, we strengthen the data-processing inequality such that it reveals a statement about the reconstruction of lost information. The main difficulty in order to understand the behavior of quantum Markov chains arises from the fact that quantum mechanical operators do not commute in general. As a result we start by explaining two techniques of how to deal with non-commuting matrices: the spectral pinching method and complex interpolation theory. Once the reader is familiar with these techniques a novel inequality is presented that extends the celebrated Golden-Thompson inequality to arbitrarily many matrices. This inequality is the key ingredient in understanding approximate quantum Markov chains and it answers a question from matrix analysis that was open since 1973, i.e., if Lieb's triple ma...

Nuclear safety chains

International Nuclear Information System (INIS)

Robbins, M.C.; Eames, G.F.; Mayell, J.R.

1981-01-01

An original scheme has been developed for expressing the complex interrelationships associated with the engineered safeguards provided for a nuclear power station. This management tool, based upon network diagrams called Nuclear Safety Chains, looks at the function required of a particular item of safety plant, defines all of the vital supplies and support features necessary for successful operation, and expresses them in visual form, to facilitate analysis and optimisation for operations and maintenance staff. The safety chains are confined to manual schemes at present, although they are designed to be compatible with modern computer techniques. Their usefulness with any routine maintenance planning application on high technology plant is already being appreciated. (author)

Relaxation Dynamics of Nanoparticle-Tethered Polymer Chains

KAUST Repository

Kim, Sung A

2015-09-08

© 2015 American Chemical Society. Relaxation dynamics of nanoparticle-tethered cis-1,4-polyisoprene (PI) are investigated using dielectric spectroscopy and rheometry. A model system composed of polymer chains densely grafted to spherical SiO2 nanoparticles to form self-suspended suspensions facilitates detailed studies of slow global chain and fast segmental mode dynamics under surface and geometrical confinement-from experiments performed in bulk materials. We report that unentangled polymer molecules tethered to nanoparticles relax far more slowly than their tethered entangled counterparts. Specifically, at fixed grafting density we find, counterintuitively, that increasing the tethered polymer molecular weight up to values close to the entanglement molecular weight speeds up chain relaxation dynamics. Decreasing the polymer grafting density for a fixed molecular weight has the opposite effect: it dramatically slows down chain relaxation, increases interchain coupling, and leads to a transition in rheological response from simple fluid behavior to viscoelastic fluid behavior for tethered PI chains that are unentangled by conventional measures. Increasing the measurement temperature produces an even stronger elastic response and speeds up molecular relaxation at a rate that decreases with grafting density and molecular weight. These observations are discussed in terms of chain confinement driven by crowding between particles and by the existence of an entropic attractive force produced by the space-filling constraint on individual chains in a self-suspended material. Our results indicate that the entropic force between densely grafted polymer molecules couples motions of individual chains in an analogous manner to reversible cross-links in associating polymers.

Value Chain Development as Alternative Method For Mapping Waste Management

Directory of Open Access Journals (Sweden)

Muhammad Saiful Hakim

2017-06-01

Full Text Available Solid Waste management begin at the household as waste of consumption and ended as a new form of waste product or recycling. Based on its value chain the subsequent process will have distict differences with manufacturing product. Value chain of manufacturing product will characterize as value added chain along the chain, where every side of the chain will generate positive chain. In the other hand, some parties of waste management value chain will negative value existed. Some parties in this chain will generate negative value solely because they must establish some cost for wipe the waste. Dissimilarities between value chain on product and waste will contribute to discrepancy between parties. Main purpose of this research is to identify value chain from solid waste management using value chain development. Another purpose to accomplished is to resolve discrepancy in value chain.  Research results shown that household is the parties that experiences negative value. To minimize the discrepancies there should be an action towards household

A possibility for generation of two species of charge carriers along main-chain and side-chains for a π-conjugated polymer

International Nuclear Information System (INIS)

Kudo, Yuki; Kawabata, Kohsuke; Goto, Hiromasa

2013-01-01

Iodide doping produces charge carriers in π-conjugated polymers. Solitons can be generated in the case of polyacetylene, and polarons in the case of aromatic-type conjugated polymers. We synthesized a conjugated main-chain/side-chain polymer, which consists of polyene in the main-chain and aromatic-type conjugated units in the side-chains. Based on the SSH (Su, Schrieffer, Heeger) theoretical model of solitons in one-dimensional conjugated polymers, we experimentally carried out chemical doping to the main-chain/side-chains conjugated polymer. Generation of the charge carriers was examined by electron spin resonance spectroscopy. This study may lead to realization of a dual doping system of solitons and polarons in π-conjugation expanded to two-dimensional directions in polymers.

Moving Segmentation Up the Supply-Chain: Supply Chain Segmentation and Artificial Neural Networks

OpenAIRE

Erevelles, Sunil; Fukawa, Nobuyuki

2008-01-01

This paper explained the concept of supply-side segmentation and transvectional alignment, and applies these concepts in the artificial neural network (ANN). To the best of our knowledge, no research has applied ANN in explaining the heterogeneity of both the supply-side and demand-side of a market in forming relational entity that consists of firms at all levels of the supply chain and the demand chain. The ANN offers a way of operationalizing the concept of supply-side segmentation. In toda...

Effect of chain stiffness on the structure of single-chain polymer nanoparticles

Science.gov (United States)

Moreno, Angel J.; Bacova, Petra; Lo Verso, Federica; Arbe, Arantxa; Colmenero, Juan; Pomposo, José A.

2018-01-01

Polymeric single-chain nanoparticles (SCNPs) are soft nano-objects synthesized by purely intramolecular cross-linking of single polymer chains. By means of computer simulations, we investigate the conformational properties of SCNPs as a function of the bending stiffness of their linear polymer precursors. We investigate a broad range of characteristic ratios from the fully flexible case to those typical of bulky synthetic polymers. Increasing stiffness hinders bonding of groups separated by short contour distances and increases looping over longer distances, leading to more compact nanoparticles with a structure of highly interconnected loops. This feature is reflected in a crossover in the scaling behaviour of several structural observables. The scaling exponents change from those characteristic for Gaussian chains or rings in θ-solvents in the fully flexible limit, to values resembling fractal or ‘crumpled’ globular behaviour for very stiff SCNPs. We characterize domains in the SCNPs. These are weakly deformable regions that can be seen as disordered analogues of domains in disordered proteins. Increasing stiffness leads to bigger and less deformable domains. Surprisingly, the scaling behaviour of the domains is in all cases similar to that of Gaussian chains or rings, irrespective of the stiffness and degree of cross-linking. It is the spatial arrangement of the domains which determines the global structure of the SCNP (sparse Gaussian-like object or crumpled globule). Since intramolecular stiffness can be varied through the specific chemistry of the precursor or by introducing bulky side groups in its backbone, our results propose a new strategy to tune the global structure of SCNPs.

Direct current hopping conductance along DNA chain

Institute of Scientific and Technical Information of China (English)

Ma Song-Shan; Xu Hui; Liu Xiao-Liang; Li Ming-Jun

2007-01-01

This paper proposes a model of direct current(DC) electron hopping transport in DNA,in which DNA is considered as a binary one-dimensional disordered system.To quantitatively study the DC conductivity in DNA,it numerically calculates the DC conductivity of DNA chains with difierent parameter values.The result shows that the DC conductivity of DNA chain increases with the increase of temperature.And the conductivity of DNA chain is depended on the probability P.which represents the degree of compositional disorder in a DNA sequence to some extent.For P＜0.5,the conductivity of DNA chain decreases with the increase of P,while for P≥0.5,the conductivity increases with the increase of p.The DC conductivity in DNA chain also varies with the change of the electric field,it presents non-Ohm's law conductivity characteristics.

The Evolutionary Dynamics of Biofuel Value Chains

DEFF Research Database (Denmark)

Ponte, Stefano

2014-01-01

In this paper I propose to push the frontier of global value chain (GVC) governance analysis through the concept of ‘polarity’. Much of the existing GVC literature has focused on ‘unipolar’ value chains, where one group of ‘lead firms’ inhabiting a specific function in a chain plays a dominant role...... in governing it. Some scholars have explored the dynamics of governance in GVCs characterized as ‘bipolar’, where two sets of actors in different functional positions both drive the chain. I expand this direction further to suggest conceptualizing governance within a continuum between unipolarity...... and multipolarity. Empirically, I do so by examining the evolutionary dynamics of governance in biofuel value chains, with specific focus on the key regulatory and institutional features that facilitated their emergence and expansion. First, I examine the formation, evolution, and governance of three national/regional...

Supply chain performance within agri-food sector

Directory of Open Access Journals (Sweden)

Dinu Daniela Magdalena

2016-01-01

Full Text Available By setting the goals of this scientific paper has been outlined the research methodology. Thus were developed conclusion, and by using the methods, procedures, techniques, rules and tools and know-how has been demonstrated the central hypothesis: 'Inside the agri-food supply chain is created value through operations and logistics activities.' The value created leads to competitive advantages in order to identify companies within market, gaining loyal consumers. The article presents the components of agri-food supply chain, the main Key Performance Indicators measuring its performance, the difference between a traditional supply chain and sustainable supply chain by analyzing the waste management component. In order to get professional expertise referring to Key Performance Indicators a quantitative research has been organized. In closing the article present the development strategies of agri-food supply chain.

Influence of chain topology and bond potential on the glass transition of polymer chains simulated with the bond fluctuation model

International Nuclear Information System (INIS)

Freire, J J

2008-01-01

The bond fluctuation model with a bond potential has been applied to investigation of the glass transition of linear chains and chains with a regular disposition of small branches. Cooling and subsequent heating curves are obtained for the chain energies and also for the mean acceptance probability of a bead jump. In order to mimic different trends to vitrification, a factor B gauging the strength of the bond potential with respect to the long-range potential (i.e. the intramolecular or intermolecular potential between indirectly bonded beads) has been introduced. (A higher value of B leads to a preference for the highest bond lengths and a higher total energy, implying a greater tendency to vitrify.) Different cases have been considered for linear chains: no long-range potential, no bond potential and several choices for B. Furthermore, two distinct values of B have been considered for alternate bonds in linear chains. In the case of the branched chains, mixed models with different values of B for bonds in the main chain and in the branches have also been investigated. The possible presence of ordering or crystallization has been characterized by calculating the collective light scattering function of the different samples after annealing at a convenient temperature below the onset of the abrupt change in the curves associated with a thermodynamic transition. It is concluded that ordering is inherited more efficiently in the systems with branched chains and also for higher values of B. The branched molecules with the highest B values in the main chain bonds exhibit two distinct transitions in the heating curves, which may be associated with two glass transitions. This behavior has been detected experimentally for chains with relatively long flexible branches

Influence of chain topology and bond potential on the glass transition of polymer chains simulated with the bond fluctuation model

Energy Technology Data Exchange (ETDEWEB)

Freire, J J [Departamento de Ciencias y Tecnicas FisicoquImicas, Facultad de Ciencias, Universidad Nacional de Educacion a Distancia (UNED), Senda del Rey 9, 28040 Madrid (Spain)], E-mail: jfreire@invi.uned.es

2008-07-16

The bond fluctuation model with a bond potential has been applied to investigation of the glass transition of linear chains and chains with a regular disposition of small branches. Cooling and subsequent heating curves are obtained for the chain energies and also for the mean acceptance probability of a bead jump. In order to mimic different trends to vitrification, a factor B gauging the strength of the bond potential with respect to the long-range potential (i.e. the intramolecular or intermolecular potential between indirectly bonded beads) has been introduced. (A higher value of B leads to a preference for the highest bond lengths and a higher total energy, implying a greater tendency to vitrify.) Different cases have been considered for linear chains: no long-range potential, no bond potential and several choices for B. Furthermore, two distinct values of B have been considered for alternate bonds in linear chains. In the case of the branched chains, mixed models with different values of B for bonds in the main chain and in the branches have also been investigated. The possible presence of ordering or crystallization has been characterized by calculating the collective light scattering function of the different samples after annealing at a convenient temperature below the onset of the abrupt change in the curves associated with a thermodynamic transition. It is concluded that ordering is inherited more efficiently in the systems with branched chains and also for higher values of B. The branched molecules with the highest B values in the main chain bonds exhibit two distinct transitions in the heating curves, which may be associated with two glass transitions. This behavior has been detected experimentally for chains with relatively long flexible branches.

Modelling antibody side chain conformations using heuristic database search.

Science.gov (United States)

Ritchie, D W; Kemp, G J

1997-01-01

We have developed a knowledge-based system which models the side chain conformations of residues in the variable domains of antibody Fv fragments. The system is written in Prolog and uses an object-oriented database of aligned antibody structures in conjunction with a side chain rotamer library. The antibody database provides 3-dimensional clusters of side chain conformations which can be copied en masse into the model structure. The object-oriented database architecture facilitates a navigational style of database access, necessary to assemble side chains clusters. Around 60% of the model is built using side chain clusters and this eliminates much of the combinatorial complexity associated with many other side chain placement algorithms. Construction and placement of side chain clusters is guided by a heuristic cost function based on a simple model of side chain packing interactions. Even with a simple model, we find that a large proportion of side chain conformations are modelled accurately. We expect our approach could be used with other homologous protein families, in addition to antibodies, both to improve the quality of model structures and to give a "smart start" to the side chain placement problem.

Natural Hazards and Supply Chain Disruptions

Science.gov (United States)

Haraguchi, M.

2016-12-01

Natural hazards distress the global economy through disruptions in supply chain networks. Moreover, despite increasing investment to infrastructure for disaster risk management, economic damages and losses caused by natural hazards are increasing. Manufacturing companies today have reduced inventories and streamlined logistics in order to maximize economic competitiveness. As a result, today's supply chains are profoundly susceptible to systemic risks, which are the risk of collapse of an entire network caused by a few node of the network. For instance, the prolonged floods in Thailand in 2011 caused supply chain disruptions in their primary industries, i.e. electronic and automotive industries, harming not only the Thai economy but also the global economy. Similar problems occurred after the Great East Japan Earthquake and Tsunami in 2011, the Mississippi River floods and droughts during 2011 - 2013, and the Earthquake in Kumamoto Japan in 2016. This study attempts to discover what kind of effective measures are available for private companies to manage supply chain disruptions caused by floods. It also proposes a method to estimate potential risks using a Bayesian network. The study uses a Bayesian network to create synthetic networks that include variables associated with the magnitude and duration of floods, major components of supply chains such as logistics, multiple layers of suppliers, warehouses, and consumer markets. Considering situations across different times, our study shows desirable data requirements for the analysis and effective measures to improve Value at Risk (VaR) for private enterprises and supply chains.