Is There a Role for Oral Antibiotic Preparation Alone Before Colorectal Surgery? ACS-NSQIP Analysis by Coarsened Exact Matching.

Science.gov (United States)

Garfinkle, Richard; Abou-Khalil, Jad; Morin, Nancy; Ghitulescu, Gabriela; Vasilevsky, Carol-Ann; Gordon, Philip; Demian, Marie; Boutros, Marylise

2017-07-01

Recent studies demonstrated reduced postoperative complications using combined mechanical bowel and oral antibiotic preparation before elective colorectal surgery. The aim of this study was to assess the impact of these 2 interventions on surgical site infections, anastomotic leak, ileus, major morbidity, and 30-day mortality in a large cohort of elective colectomies. This is a retrospective comparison of 30-day outcomes using the American College of Surgeons National Surgical Quality Improvement Program colectomy-targeted database with coarsened exact matching. Interventions were performed in hospitals participating in the national surgical database. Adult patients who underwent elective colectomy from 2012 to 2014 were included. Preoperative bowel preparations were evaluated. The primary outcomes measured were surgical site infections, anastomotic leak, postoperative ileus, major morbidity, and 30-day mortality. A total of 40,446 patients were analyzed: 13,219 (32.7%), 13,935 (34.5%), and 1572 (3.9%) in the no-preparation, mechanical bowel preparation alone, and oral antibiotic preparation alone groups, and 11,720 (29.0%) in the combined preparation group. After matching, 9800, 1461, and 8819 patients remained in the mechanical preparation, oral antibiotic preparation, and combined preparation groups for comparison with patients without preparation. On conditional logistic regression of matched patients, oral antibiotic preparation alone was protective of surgical site infection (OR, 0.63; 95% CI, 0.45-0.87), anastomotic leak (OR, 0.60; 95% CI, 0.34-0.97), ileus (OR, 0.79; 95% CI, 0.59-0.98), and major morbidity (OR, 0.73; 95% CI, 0.55-0.96), but not mortality (OR, 0.32; 95% CI, 0.08-1.18), whereas a regimen of combined oral antibiotics and mechanical bowel preparation was protective for all 5 major outcomes. When directly compared with oral antibiotic preparation alone, the combined regimen was not associated with any difference in any of the 5 postoperative

Soluplus®/TPGS-based solid dispersions prepared by hot-melt extrusion equipped with twin-screw systems for enhancing oral bioavailability of valsartan.

Science.gov (United States)

Lee, Jae-Young; Kang, Wie-Soo; Piao, Jingpei; Yoon, In-Soo; Kim, Dae-Duk; Cho, Hyun-Jong

2015-01-01

Soluplus(®) (SP) and D-alpha-tocopherol polyethylene glycol 1000 succinate (TPGS)-based solid dispersion (SD) formulations were developed by hot-melt extrusion (HME) to improve oral bioavailability of valsartan (VST). HME process with twin-screw configuration for generating a high shear stress was used to prepare VST SD formulations. The thermodynamic state of the drug and its dispersion in the polymers were evaluated by solid-state studies, including Fourier-transform infrared, X-ray diffraction, and differential scanning calorimetry. Drug release from the SD formulations was assessed at pH values of 1.2, 4.0, and 6.8. Pharmacokinetic study was performed in rats to estimate the oral absorption of VST. HME with a high shear rate produced by the twin-screw system was successfully applied to prepare VST-loaded SD formulations. Drug amorphization and its molecular dispersion in the polymer matrix were verified by several solid-state studies. Drug release from SD formulations was improved, compared to the pure drug, particularly at pH 6.8. Oral absorption of drug in rats was also enhanced in SP and TPGS-based SD groups compared to that in the pure drug group. SP and TPGS-based SDs, prepared by the HME process, could be used to improve aqueous solubility, dissolution, and oral absorption of poorly water-soluble drugs.

ACTOplus Met XR in Treating Patients With Stage I-IV Oral Cavity or Oropharynx Cancer Undergoing Definitive Treatment

Science.gov (United States)

2018-03-02

Oral Cavity Neoplasm; Oropharyngeal Neoplasm; Stage I Oral Cavity Squamous Cell Carcinoma AJCC v6 and v7; Stage I Oropharyngeal Squamous Cell Carcinoma AJCC v6 and v7; Stage II Oral Cavity Squamous Cell Carcinoma AJCC v6 and v7; Stage II Oropharyngeal Squamous Cell Carcinoma AJCC v6 and v7; Stage III Oral Cavity Squamous Cell Carcinoma AJCC v6 and v7; Stage III Oropharyngeal Squamous Cell Carcinoma AJCC v7; Stage IV Oral Cavity Squamous Cell Carcinoma AJCC v6 and v7; Stage IV Oropharyngeal Squamous Cell Carcinoma AJCC v7; Stage IVA Oral Cavity Squamous Cell Carcinoma AJCC v6 and v7; Stage IVA Oropharyngeal Squamous Cell Carcinoma AJCC v7; Stage IVB Oral Cavity Squamous Cell Carcinoma AJCC v6 and v7; Stage IVB Oropharyngeal Squamous Cell Carcinoma AJCC v7; Stage IVC Oral Cavity Squamous Cell Carcinoma AJCC v6 and v7; Stage IVC Oropharyngeal Squamous Cell Carcinoma AJCC v7

Stability of extemporaneously prepared rufinamide oral suspensions.

Science.gov (United States)

Hutchinson, David J; Liou, Yayin; Best, Robert; Zhao, Fang

2010-03-01

Rufinamide is an oral antiepileptic drug indicated for adjunctive therapy in treating generalized seizures associated with Lennox-Gastaut syndrome. Currently, rufinamide is available as 200-mg and 400-mg tablets. A liquid dosage form does not exist at the present time. Lack of a suspension formulation may present an administration problem for many children and adults who are unable to swallow tablets. The availability of a liquid dosage form will provide an easy and accurate way to measure and administer the medication. To determine the stability of both sugar-containing and sugar-free rufinamide suspensions over a 90-day period. A suspension of rufinamide 40 mg/mL was prepared by grinding twelve 400-mg tablets of rufinamide tablets in a glass mortar. Sixty milliliters of Ora-Plus and 60 mL of either Ora-Sweet or Ora-Sweet SF (sugar free) were mixed and added to the powder to make a final volume of 120 mL. Three identical samples of each formulation were prepared and placed in 60-mL amber plastic bottles and were stored at room temperature. A 1-mL sample was withdrawn from each of the 6 bottles with a micropipette immediately after preparation and at 7, 14, 28, 56, and 90 days. After further dilution to an expected concentration of 0.4 mg/mL, the samples were assayed using high-performance liquid chromatography. Stability was defined as the retention of at least 90% of the initial concentration. At least 90% of the initial rufinamide concentration remained throughout the 90-day study period in both preparations. There were no detectable changes in color, odor, taste, and pH and no visible microbial growth. Extemporaneously compounded suspensions of rufinamide 40 mg/mL in a 1:1 mixture of Ora-Plus and Ora-Sweet or Ora-Sweet SF were stable for at least 90 days when stored in 59-mL amber polypropylene plastic bottles at room temperature.

Preparation, characterization and bioavailability by oral administration of O/W curcumin nanoemulsions stabilized with lysophosphatidylcholine.

Science.gov (United States)

Chávez-Zamudio, Rubi; Ochoa-Flores, Angélica A; Soto-Rodríguez, Ida; Garcia-Varela, Rebeca; García, Hugo Sergio

2017-09-20

Curcumin is the main and most abundant bioactive component in Curcuma longa L. with documented properties in the prevention and treatment of chronic degenerative and infectious diseases. However, curcumin has low solubility in aqueous media, hence low bioavailability when administered orally. The use of nanoemulsions as carriers can provide a partial solution to bioavailability restrictions. In our study, O/W nanoemulsions of curcumin were prepared using lysophosphatidylcholine, a phospholipid with proven emulsification capacity; nevertheless, such qualities have not been previously reported in the preparation of nanoemulsions. Lysophosphatidylcholine was obtained by enzymatic removal of one fatty acid residue from phosphatidylcholine. The objective of our work was to formulate stable curcumin nanoemulsions and evaluate their bioavailability in BALB/c mice plasma after oral administration. Formulated nanoemulsions had a droplet size mean of 154.32 ± 3.10 nm, a polydispersity index of 0.34 ± 0.07 and zeta potential of -10.43 ± 1.10 mV; stability was monitored for 12 weeks. Lastly, in vivo pharmacokinetic parameters, using BALB/c mice, were obtained; namely, C max of 610 ± 65.0 μg mL -1 and T max of 2 h. Pharmacokinetic data revealed a higher bioavailability of emulsified as opposed to free curcumin. Research regarding other potential emulsifiers that may provide better health benefits and carry nano-encapsulated bioactive compounds more effectively, is necessary. This study provides important data on the preparation and design of nanoencapsulated Curcumin using lysophosphatidylcholine as an emulsifier.

Self-assembled lecithin/chitosan nanoparticles for oral insulin delivery: preparation and functional evaluation

Science.gov (United States)

Liu, Liyao; Zhou, Cuiping; Xia, Xuejun; Liu, Yuling

2016-01-01

Purpose Here, we investigated the formation and functional properties of self-assembled lecithin/chitosan nanoparticles (L/C NPs) loaded with insulin following insulin–phospholipid complex preparation, with the aim of developing a method for oral insulin delivery. Methods Using a modified solvent-injection method, insulin-loaded L/C NPs were obtained by combining insulin–phospholipid complexes with L/C NPs. The nanoparticle size distribution was determined by dynamic light scattering, and morphologies were analyzed by cryogenic transmission electron microscopy. Fourier transform infrared spectroscopy analysis was used to disclose the molecular mechanism of prepared insulin-loaded L/C NPs. Fast ultrafiltration and a reversed-phase high-performance liquid chromatography assay were used to separate free insulin from insulin entrapped in the L/C NPs, as well as to measure the insulin-entrapment and drug-loading efficiencies. The in vitro release profile was obtained, and in vivo hypoglycemic effects were evaluated in streptozotocin-induced diabetic rats. Results Our results indicated that insulin-containing L/C NPs had a mean size of 180 nm, an insulin-entrapment efficiency of 94%, and an insulin-loading efficiency of 4.5%. Cryogenic transmission electron microscopy observations of insulin-loaded L/C NPs revealed multilamellar structures with a hollow core, encircled by several bilayers. In vitro analysis revealed that insulin release from L/C NPs depended on the L/C ratio. Insulin-loaded L/C NPs orally administered to streptozotocin-induced diabetic rats exerted a significant hypoglycemic effect. The relative pharmacological bioavailability following oral administration of L/C NPs was 6.01%. Conclusion With the aid of phospholipid-complexation techniques, some hydrophilic peptides, such as insulin, can be successfully entrapped into L/C NPs, which could improve oral bioavailability, time-dependent release, and therapeutic activity. PMID:26966360

Type of oral solid medication packaging and medication preparation time in nursing homes: A direct observation study.

Science.gov (United States)

Cready, C M; Hudson, C; Dreyer, K

2017-12-01

Medication administration is a substantial portion of the workday in nursing homes, with the medication preparation step being the most time-consuming. However, little is known about how medication preparation time is affected by the type of packaging used for oral solid medications (ie, tablets/capsules). We examined the effects of two types of packaging. As fewer steps are associated with strip packaging compared to bingo card packaging, we hypothesized that the increase in medication preparation seconds per resident with each additional oral solid medication would be smaller when strip packaging was used. A total of 430 medication preparations conducted by eight nurses during the regularly scheduled morning medication administration period in two nursing homes-using strip packaging and bingo card packaging, respectively-were observed. Each medication preparation observation was matched to its corresponding medication administration record and observations averaged across resident. Using the resident sample (N=149), we estimated three regression models (adjusting the standard errors for the clustering of resident by nurse). The first model regressed medication preparation seconds on the number of oral solid medications. The second model added the type of packaging used and the control variables (type of unit [long-term care, post-acute care], the number of one-half pills and the dosage form diversity in the preparation). To test our hypothesis, the third model added an interaction term between the number of oral solid medications and the type of packaging used. As hypothesized, all else equal, the number of oral solid medications tended to increase medication preparation time per resident in both nursing homes, but the increase was smaller in the strip packaging nursing home (Ppackaging nursing home increased medication preparation by an average of 13 seconds (b=13.077), whereas each oral solid medication administered in the strip packaging nursing home

Preparation of 6,6,1',1',6',6'-hexadeutero sucrose.

Science.gov (United States)

Gouy, Marie-Hélène; Danel, Mathieu; Gayral, Maud; Bouchu, Alain; Queneau, Yves

2007-11-05

The preparation of 6,6,1',1',6',6'-hexadeutero sucrose is reported. The synthesis is based on a triple oxidation of a protected sucrose 6,1',6'-triol to the corresponding 6,1',6'-tricarboxylic acid or ester, followed by reduction with lithium aluminium deuteride. This triple oxidation could be achieved either using cat. TEMPO-NaOCl (to the acid) or PDC-Ac(2)O-t-BuOH (to the t-butyl carboxylic ester).

Preparation and characterization of gellan gum/glucosamine/clioquinol film as oral cancer treatment patch.

Science.gov (United States)

Tsai, Wanchi; Tsai, Huifang; Wong, Yinuan; Hong, Juiyen; Chang, Shwujen; Lee, Mingwei

2018-01-01

To administer cancer drugs with improved convenience to patients and to enhance the bioavailability of cancer drugs for oral cancer therapy, this study prepared gellan gum/glucosamine/clioquinol (GG/GS/CQ) film as the oral cancer treatment patch. GG/GS/CQ film fabricated through the EDC-mediated coupling reactions (GG/GS/CQ/EDC film). The film of the physicochemical properties and drug release kinetics were studied. The effectiveness of GG/GS/CQ/EDC film as oral cancer treatment patch were evaluated with the animal model. The results confirmed that CQ can be incorporated via EDC-mediated covalent conjugation to gellan gum/glucosamine. Mechanical testing revealed that the maximum tensile strength and elongation percentage at break were 1.91kgf/mm 2 and 5.01% for GG/GS/CQ/EDC film. After a drug release experiment lasting 45days, 86.8% of CQ was released from GG/GS/CQ/EDC film. The Huguchi model fit the GG/GS/CQ/EDC drug release data with high correlation coefficients (R 2 =0.9994, respectively). The effect of the CQ dose on oral cancer cells (OC-2) was tested, and the IC 50 of CQ alone and CQ with 10μM CuCl 2 were 9.59 and 2.22μM, respectively. The animal testing indicated that GG/GS/CQ/EDC film was decreased epidermal growth factor receptor (EGFR) expression and suppress tumor progression. These findings provide insights into a possible use for GG/GS/CQ/EDC film for oral ca in clinical practice. The GG/GS/CQ/EDC film is suitable as the dressing for use in the treatment of early-stage cancer or as wound care after surgery in late-stage of oral cancer treatment. Copyright © 2017 Elsevier B.V. All rights reserved.

Chemical stability of oseltamivir in oral solutions.

Science.gov (United States)

Albert, K; Bockshorn, J

2007-09-01

The stability of oseltamivir in oral aqueous solutions containing the preservative sodium benzoate was studied by a stability indicating HPLC-method. The separation was achieved on a RP-18 ec column using a gradient of mobile phase A (aqueous solution of 50 mM ammonium acetate) and mobile phase B (60% (v/v) acetonitrile/40% (v/v) mobile phase A). The assay was subsequently validated according to the ICH guideline Q2(R1). The extemporaneously prepared "Oseltamivir Oral Solution 15 mg/ml for Adults or for Children" (NRF 31.2.) according to the German National Formulary ("Neues Rezeptur-Formularium") was stable for 84 days if stored under refrigeration. After storage at 25 degrees C the content of oseltamivir decreased to 98.4%. Considering the toxicological limit of 0.5% of the 5-acetylamino derivative (the so-called isomer I) the solution is stable for 46 days. Oseltamivir was less stable in a solution prepared with potable water instead of purified water. Due to an increasing pH the stability of this solution decreased to 14 days. Furthermore a white precipitate of mainly calcium phosphate was observed. The addition of 0.1% anhydrous citric acid avoided these problems and improved the stability of the solution prepared with potable water to 63 days. Sodium benzoate was stable in all oral solutions tested.

Structural phase transitions of NaV6O11 and SrV6O11

International Nuclear Information System (INIS)

Kanke, Yasushi; Izumi, Fujio; Kato, Katsuo; Morii, Yukio; Funahashi, Satoru; Akiba, Etsuo.

1993-01-01

Crystal structures of NaV 6 O 11 at several temperatures were studied by either Rietveld analyses of both neutron and X-ray powder diffraction data, or an analysis of X-ray single crystal diffraction data. At 200 K, NaV 6 O 11 loses the center of symmetry, and its space group changes from P6 3 /mmc to P6 3 mc. Consequently, V(2) splits into two sites. At 30 K, NaV 6 O 11 was transformed from the hexagonal form to the orthorhombic one (Cmc2 1 ), and V(1) splits into two sites. These results indicate that magnetic phase transitions of NaV 6 O 11 at 245 K and 64.2 K are accompanied by structural phase transitions. On the other hand, no structural phase transition was detected in SrV 6 O 11 . (author)

Self-assembled lecithin/chitosan nanoparticles for oral insulin delivery: preparation and functional evaluation

Directory of Open Access Journals (Sweden)

Liu LY

2016-02-01

Full Text Available Liyao Liu, Cuiping Zhou, Xuejun Xia, Yuling Liu State Key Laboratory of Bioactive Substance and Function of Natural Medicines, Beijing Key Laboratory of Drug Delivery Technology and Novel Formulations, Department of Pharmaceutics, Institute of Materia Medica, Chinese Academy of Medical Sciences & Peking Union Medical College, Beijing, People’s Republic of China Purpose: Here, we investigated the formation and functional properties of self-assembled lecithin/chitosan nanoparticles (L/C NPs loaded with insulin following insulin–phospholipid complex preparation, with the aim of developing a method for oral insulin delivery.Methods: Using a modified solvent-injection method, insulin-loaded L/C NPs were obtained by combining insulin–phospholipid complexes with L/C NPs. The nanoparticle size distribution was determined by dynamic light scattering, and morphologies were analyzed by cryogenic transmission electron microscopy. Fourier transform infrared spectroscopy analysis was used to disclose the molecular mechanism of prepared insulin-loaded L/C NPs. Fast ultrafiltration and a reversed-phase high-performance liquid chromatography assay were used to separate free insulin from insulin entrapped in the L/C NPs, as well as to measure the insulin-entrapment and drug-loading efficiencies. The in vitro release profile was obtained, and in vivo hypoglycemic effects were evaluated in streptozotocin-induced diabetic rats.Results: Our results indicated that insulin-containing L/C NPs had a mean size of 180 nm, an insulin-entrapment efficiency of 94%, and an insulin-loading efficiency of 4.5%. Cryogenic transmission electron microscopy observations of insulin-loaded L/C NPs revealed multilamellar structures with a hollow core, encircled by several bilayers. In vitro analysis revealed that insulin release from L/C NPs depended on the L/C ratio. Insulin-loaded L/C NPs orally administered to streptozotocin-induced diabetic rats exerted a significant

Preparation of neptunium and plutonium tracers in nuclear reactions of sup 2 sup 3 sup 6 U with (21-60)MeV sup 3 He ions

CERN Document Server

Aaltonen, J; Trzaska, V; Gromova, E A; Yakovlev, V A

2001-01-01

Preparation of sup 2 sup 3 sup 6 Pu, sup 2 sup 3 sup 7 Pu and sup 2 sup 3 sup 5 Np by reactions sup 2 sup 3 sup 6 U( sup 3 He, t beta sup -) sup 2 sup 3 sup 6 Pu, sup 2 sup 3 sup 6 U( sup 3 He, 2n) sup 2 sup 3 sup 7 Pu and sup 2 sup 3 sup 6 U( sup 3 He, p3n) sup 2 sup 3 sup 5 Np in sup 3 He ion beams, their energy 43 and 60 MeV, in the K-130 cyclotron at Yuvyaskyul University (Finland) was studied. Cross sections of the reactions were determined. Yield curves for thick targets were calculated. The results are discussed and compared with previously obtained data on other reactions giving rise to formation of the same products. Methods of radiochemical separation of the products and sample preparation for alpha- and gamma-spectrometry are described

Polarity-sensitive nanocarrier for oral delivery of Sb(V and treatment of cutaneous leishmaniasis

Directory of Open Access Journals (Sweden)

Lanza JS

2016-05-01

Full Text Available Juliane S Lanza,1 Flaviana R Fernandes,1 José D Corrêa-Júnior,2 José MC Vilela,3 Rogério Magalhães-Paniago,4 Lucas AM Ferreira,5 Margareth S Andrade,3 Cynthia Demicheli,6 Maria N Melo,7 Frédéric Frézard1 1Department of Physiology and Biophysics, 2Department of Morphology, Instituto de Ciências Biológicas (ICB, Universidade Federal de Minas Gerais (UFMG, 3Innovation and Technology Center SENAI FIEMG – Campus CETEC, 4Department of Physics, Instituto de Ciências Exatas (ICEX, 5Department of Pharmaceutical Products, Faculty of Pharmacy, Universidade Federal de Minas Gerais (UFMG, 6Department of Chemistry, Instituto de Ciências Exatas (ICEX, 7Department of Parasitology, Instituto de Ciências Biológicas (ICB, Universidade Federal de Minas Gerais (UFMG, Belo Horizonte, Brazil Abstract: There is a great need for orally active drugs for the treatment of the neglected tropical disease leishmaniasis. Amphiphilic Sb(V complexes, such as 1:3 Sb–N-octanoyl-N-methylglucamide complex (SbL8, are promising drug candidates. It has been previously reported that SbL8 forms kinetically stabilized nanoassemblies in water and that this simple dispersion exhibits antileishmanial activity when given by oral route to a murine model of visceral leishmaniasis. The main objective of the present work was to interfere in the structural organization of these nanoassemblies so as to investigate their influence on the oral bioavailability of Sb, and ultimately, optimize an oral formulation of SbL8 for the treatment of cutaneous leishmaniasis. The structural organization of SbL8 nanoassemblies was manipulated through addition of propylene glycol (PG to the aqueous dispersion of SbL8. The presence of 50% (v/v PG resulted in the loss of hydrophobic microenvironment, as evidenced by fluorescence probing. However, nanostructures were still present, as demonstrated by dynamic light scattering, small-angle X-ray scattering, and atomic force microscopy (AFM. A

Comparison between oral antibiotics and probiotics as bowel preparation for elective colon cancer surgery to prevent infection: prospective randomized trial.

Science.gov (United States)

Sadahiro, Sotaro; Suzuki, Toshiyuki; Tanaka, Akira; Okada, Kazutake; Kamata, Hiroko; Ozaki, Toru; Koga, Yasuhiro

2014-03-01

We have already reported that, for patients undergoing elective colon cancer operations, perioperative infection can be prevented by a single intravenous dose of an antibiotic given immediately beforehand if mechanical bowel preparation and the administration of oral antibiotics are implemented. Synbiotics has been reported to reduce the rate of infection in patients after pancreatic cancer operations. The effectiveness of oral antibiotics and probiotics in preventing postoperative infection in elective colon cancer procedures was examined in a randomized controlled trial. Three hundred ten patients with colon cancer randomly were assigned to one of three groups. All patients underwent mechanical bowel preparation and received a single intravenous dose of flomoxef immediately before operation. Probiotics were administered in Group A; oral antibiotics were administered in Group B; and neither probiotics nor oral antibiotics were administered in Group C. Stool samples were collected 9 and 2 days before and 7 and 14 days after the procedure. Clostridium difficile toxin and the number of bacteria in the intestine were determined. The rates of incisional surgical-site infection were 18.0%, 6.1%, and 17.9% in Groups A, B, and C, and the rates of leakage were 12.0%, 1.0%, and 7.4% in Groups A, B, and C, respectively, indicating that both rates were lesser in Group B than in Groups A and C (P = .014 and P = .004, respectively). The detection rates of C. difficile toxin were not changed among the three groups. We recommend oral antibiotics, rather than probiotics, as bowel preparation for elective colon cancer procedures to prevent surgical-site infections. Copyright © 2014 Mosby, Inc. All rights reserved.

MnV2O6.V2O5 cross-like nanobelt arrays: synthesis, characterization and photocatalytic properties

International Nuclear Information System (INIS)

Abbood, Hayder A.; Ahmed, Khalid Abdelazez Mohamed; Ren, Yong; Huang, Kaixun

2013-01-01

Single-crystalline MnV 2 O 6 .V 2 O 5 cross-like nanobelt arrays were successfully synthesized by hydrothermal reaction. The products were characterized by X-ray diffraction, transmission electron microscopy and high-resolution transmission electron microscopy. The effects of the reaction conditions such as pH, V 5+ /Mn 2+ ratio, carboxymethyl cellulose concentration and reaction time on the morphology of the products were studied. The band gap of the as-prepared products was calculated via diffuse reflectance spectral analysis and their activity of photocatalytic oxidation was evaluated by photodegradation of methylene blue under visible-light irradiation. The results showed that the degradation efficiency of methylene blue catalyzed by the calcinated products is remarkably enhanced due to Mn doping, suggesting that MnV 2 O 6 .V 2 O 5 cross-like nanobelt arrays are a good candidate for visible-light-driven photocatalysts. (orig.)

Synthesis, surface properties and optical characteristics of CuV_2O_6 nanofibers

International Nuclear Information System (INIS)

Wang, Fengyun; Zhang, Hongchao; Liu, Lei; Shin, Byoungchul; Shan, Fukai

2016-01-01

In"3"+-doped CuV_2O_6 nanofibers were prepared via the hydrothermal synthesis method, which produced fibers with a typical diameter of 100 nm, and a length of 1–5 μm. The nanofibers grew in a preferred [020] direction. The crystal phase together with the structure was studied via X-ray polycrystalline diffraction (XRD) and the Rietveld refinement. The surface characteristics of this nanostructure were measured with a scanning electron microscope (SEM), energy dispersive spectra (EDS), transmission electron microscopy (TEM), and N_2–adsorption–desorption isotherms. Photo-activities were evaluated by optical absorption, luminescence, and decay behaviors. The band-gap structures and positions were investigated. The vanadate has an efficient optical absorption from the UV to the visible wavelength region with an indirect allowed transition characterized by the narrow gap energy of 1.96 eV. The photocatalysis was investigated by the photo-degradation of RhB solutions irradiated by visible light. Correspondingly, CuV_2O_6:In"3"+ nanofibers possess quenched luminescence and have a more efficient photocatalytic activity on the RhB degradation. Photocatalytic mechanisms were proposed based on the experimental results, the band-energy positions, and the trapping experiments. The coexistence of V"4"+/V"5"+ ions and induced-color centers was discussed on the proposed photocatalytic mechanism. The results demonstrated the promising potency of such In"3"+-doped CuV_2O_6 nanofibers for technological applications due to their high photo-activity and good cycling performance with the fiber morphology. - Highlights: • Recyclable α-CuV_2O_6 nanofibers were successfully prepared via hydrothermal synthesis. • In-doped α-CuV_2O_6 as a visible-light-driven photocatalyst was firstly developed. • The nanofibers display typical indirect allowed transitions with narrow band of 1.96 eV. • It presents high activity on RhB degradation under visible light irradiation. • The

Preparation and Evaluation of Enteric-Coated Chitosan Derivative-Based Microparticles Loaded with Salmon Calcitonin as an Oral Delivery System

Directory of Open Access Journals (Sweden)

Hiraku Onishi

2016-09-01

Full Text Available Background: The production of protein drugs has recently increased due to advances in biotechnology, but their clinical use is generally limited to parenteral administration due to low absorption in non-parenteral administration. Therefore, non-parenteral delivery systems allowing sufficient absorption draw much attention. Methods: Microparticles (MP were prepared using chitosan-4-thio-butylamidine conjugate (Ch-TBA, trimethyl-chitosan (TMC, and chitosan (Ch. Using salmon calcitonin (sCT as a model protein drug, Ch-TBA-, Ch-TBA/TMC (4/1-, and Ch-based MP were produced, and their Eudragit L100 (Eud-coated MP, named Ch-TBA-MP/Eud, Ch-TBA/TMC-MP/Eud, and Ch-MP/Eud, respectively, were prepared as oral delivery systems. These enteric-coated microparticles were examined in vitro and in vivo. Results: All microparticles before and after enteric coating had a submicron size (600–800 nm and micrometer size (1300–1500 nm, respectively. In vitro release patterns were similar among all microparticles; release occurred gradually, and the release rate was slower at pH 1.2 than at pH 6.8. In oral ingestion, Ch-TBA-MP/Eud suppressed plasma Ca levels most effectively among the microparticles tested. The relative effectiveness of Ch-TBA-MP/Eud to the intramuscular injection was 8.6%, while the sCT solution showed no effectiveness. Conclusion: The results suggest that Eud-coated Ch-TBA-based microparticles should have potential as an oral delivery system of protein drugs.

Dimensional stability of Ti--6Al--6V--2Sn

International Nuclear Information System (INIS)

Rack, H.J.

1978-08-01

The dimensional stability of Ti-6Al-6V-2Sn has been examined. It is shown that in the duplex annealed condition Ti-6Al-6V-2Sn is dimensionally stable at temperatures up to 448 0 K for 512 hrs. Solution treated Ti-6Al-6V-2Sn undergoes large dimensional changes during both initial aging between 673 and 973 0 K and subsequent exposure to low temperatures ( 0 K). These results indicate that if close dimensional tolerances must be maintained, duplex annealed Ti-6Al-6V-2Sn should be selected. Selection of treated and aged Ti-6Al-6V-2Sn should only be considered if accompanied by full scale environmental testing

Enhanced bioavailability of orally administered flurbiprofen by combined use of hydroxypropyl-cyclodextrin and poly(alkyl-cyanoacrylate) nanoparticles.

Science.gov (United States)

Zhao, Xiaoyun; Li, Wei; Luo, Qiuhua; Zhang, Xiangrong

2014-03-01

Flurbiprofen was formulated into nanoparticle suspension to improve its oral bioavailability. Hydroxypropyl-β-cyclodextrin inclusion-flurbiprofen complex (HP-β-CD-FP) was prepared, then incorporating this complex into poly(alkyl-cyanoacrylate) (PACA) nanoparticles. HP-β-CD-FP-PACA nanoparticle was prepared by the emulsion solvent polymerization method. The zeta potential was -26.8 mV, the mean volume particle diameter was 134 nm, drug encapsulation efficiency was 53.3 ± 3.6 % and concentration was 1.5 mg/mL. The bioavailability of flurbiprofen from optimized nanoparticles was assessed in male Wistar rats at a dose of 15 mg/kg. As compared to the flurbiprofen suspension, 211.6 % relative bioavailability was observed for flurbiprofen nanoparticles. The reduced particle size and increased surface area may contribute to improve oral bioavailability of flurbiprofen.

Stability of extemporaneously prepared glycopyrrolate oral suspensions.

Science.gov (United States)

Cober, Mary Petrea; Johnson, Cary E; Sudekum, David; Penprase, Kimberly

2011-05-01

The stability of extemporaneously prepared glycopyrrolate 0.5-mg/mL suspensions was evaluated. An oral suspension of glycopyrrolate 0.5 mg/mL was prepared by thoroughly grinding 30 1-mg tablets of glycopyrrolate in a glass mortar. Thirty milliliters of Ora-Plus and 30 mL of either Ora-Sweet or Ora-Sweet SF were mixed and added to the powder to make a final volume of 60 mL. Three identical samples of the formulation were prepared and placed in 2-oz amber plastic bottles with child-resistant caps and stored at room temperature (23-25 °C). A 1-mL sample was withdrawn from each of the three bottles with a micropipette immediately after preparation and 7, 15, 30, 60, and 90 days afterward. After further dilution to an expected concentration of 50 μg/mL with sample diluent, the samples were assayed in duplicate by stability-indicating high-performance liquid chromatography. The samples were visually examined for any color change and evaluated for pH on each day of analysis. Taste evaluations were performed at the beginning and end of the study. Stability was defined as the retention of at least 90% of the initial concentration. At least 95% of the initial glycopyrrolate remained throughout the 90-day study period in both preparations. There were no detectable changes in color, odor, taste, and pH, and no visible microbial growth was observed in any sample. Extemporaneously compounded suspensions of glycopyrrolate 0.5 mg/mL in a 1:1 mixture of Ora-Plus/Ora-Sweet or Ora-Plus/Ora-Sweet SF were stable for at least 90 days when stored in amber plastic bottles at room temperature.

Effect of oral preparation of astragalus membranaceous on serum SOD levels in aged patients with chronic bronchial asthma

International Nuclear Information System (INIS)

Sun Zhiyong

2005-01-01

Objective: To investigate the therapeutic effect of oral liquid preparation of astragalus membranaceous in aged patients with chronic bronchial asthma with special reference on the serum SOD levels. Methods: Serum SOD levels were measured with RIA in 42 aged patients with chronic bronchial asthma both before and after a course of treatment with oral liquid preparation of astragalus membranaceous (10ml b. i. d for 3 months) as well as in 35 controls. Results: The patients general condition was greatly improved after the treatment. Before treatment, the serum SOD levels in the patients were significantly lower than those in controls (P 0.05). Conclusion: Oral liquid preparation of astragalus membranaceous was therapeutically useful for chronic bronchial asthma in aged patients with correction of the serum SOD levels. (authors)

Pharmacokinetics of morphine-6-glucuronide following oral administration in healthy volunteers

DEFF Research Database (Denmark)

Villesen, Hanne H.; Kristensen, Kim; Hansen, Steen Honoré

2007-01-01

After oral administration, morphine-6-glucuronide (M6G) displays an atypical absorption profile with two peak plasma concentrations. A proposed explanation is that M6G is hydrolysed to morphine in the colon, which is then absorbed and subsequently undergoes metabolism in the liver to morphine-3-g......-glucuronide (M3G) and M6G. The aims of this study were to confirm and elucidate the biphasic absorption profile as well as clarify the conversion of M6G to morphine after a single oral administration of M6G in healthy volunteers....

Enhanced dissolution and oral bioavailability of valsartan solid dispersions prepared by a freeze-drying technique using hydrophilic polymers.

Science.gov (United States)

Xu, Wei-Juan; Xie, Hong-Juan; Cao, Qing-Ri; Shi, Li-Li; Cao, Yue; Zhu, Xiao-Yin; Cui, Jing-Hao

2016-01-01

This study aimed to improve the dissolution rate and oral bioavailability of valsartan (VAL), a poorly soluble drug using solid dispersions (SDs). The SDs were prepared by a freeze-drying technique with polyethylene glycol 6000 (PEG6000) and hydroxypropylmethylcellulose (HPMC 100KV) as hydrophilic polymers, sodium hydroxide (NaOH) as an alkalizer, and poloxamer 188 as a surfactant without using any organic solvents. In vitro dissolution rate and physicochemical properties of the SDs were characterized using the USP paddle method, differential scanning calorimetry (DSC), X-ray diffractometry (XRD) and Fourier transform-infrared (FT-IR) spectroscopy, respectively. In addition, the oral bioavailability of SDs in rats was evaluated by using VAL (pure drug) as a reference. The dissolution rates of the SDs were significantly improved at pH 1.2 and pH 6.8 compared to those of the pure drug. The results from DSC, XRD showed that VAL was molecularly dispersed in the SDs as an amorphous form. The FT-IR results suggested that intermolecular hydrogen bonding had formed between VAL and its carriers. The SDs exhibited significantly higher values of AUC 0-24 h and Cmax in comparison with the pure drug. In conclusion, hydrophilic polymer-based SDs prepared by a freeze-drying technique can be a promising method to enhance dissolution rate and oral bioavailability of VAL.

Preparation of a novel KCC-1/nylon 6 nanocomposite via electrospinning technique

Energy Technology Data Exchange (ETDEWEB)

Aghakhani, Ali [Material and Energy Research Center, Department of Semiconductors (Iran, Islamic Republic of); Kazemi, Ensiyeh; Kazemzad, Mahmood, E-mail: m-kazemzad@merc.ac.ir [Material and Energy Research Center, Department of Energy (Iran, Islamic Republic of)

2015-10-15

In this research, a novel nanofibrous composite of KCC-1/nylon 6 was prepared using electrospinning techniques. First, fibrous silica nanospheres (KCC-1) were synthesized via conventional polycondensation method with a new solvent system. The scanning electron microscopy (SEM) images showed a spongy spherical morphology with a uniform distribution of particle sizes and an average diameter of around 305 nm. Synthesized KCC-1 nanospheres are considered as mesoporous materials due to their high BET specific surface area of 576 m{sup 2} g{sup −1} and BJH average pore diameter of 3.28 nm. The KCC-1/nylon 6 composite was fabricated by preparing a dispersion of nanosilica (10–50 % w/w) in a solution of nylon 6 (15 % w/v) in formic acid. Upon applying a high voltage, the nonwoven electrospun KCC-1/nylon 6 composite nanofibers were obtained. The KCC-1 nanospheres were arranged in line along the nylon 6 fibers like rosary beads wrapped in the polymer. Based on the SEM images, we obtained a well-distributed nanocomposite even at higher silica content. The prepared KCC-1/nylon 6 composite showed 29–55 % higher BET specific surface area compared with pure nylon 6 nanofibers which makes it a good candidate to be used as a sorbent material for environmental or drug delivery applications.

The Assessment of Oral Microflora Exposed to 3% Ethanolic Extract of Brazilian Green Propolis Preparation Used for Hygiene Maintenance following Minor Oral Surgeries

Directory of Open Access Journals (Sweden)

Tadeusz Morawiec

2015-01-01

Full Text Available The aim of this study was to investigate the influence of a topically administered hygienic preparation containing a 3% ethanolic extract of Brazilian green propolis (EEP-B on oral microflora spectrum changes in a group of patients who underwent common oral surgery procedures. Two gel samples were compared: the tested gel containing an active ingredient, that is, a 3% EEP-B (gel GA, and a placebo as the negative control (gel GC. The collection of microbiological material included 14 patients requiring surgical extraction of wisdom molars and short endosseous implant installation. Clinical examinations were carried out as follow-up, that is, baseline and after 5-6 weeks’ time. During the first and subsequent assessment, swabs were taken from the mucosal surface. The number of microorganism species was found to have increased following the application of GC gel over the period of 5-6 weeks. This mainly affected Gram-positive rods and bacilli as well as Gram-negative rods. Application of the GA gel enriched with 3% EEP-B caused a profound reduction in the amount of Neisseria spp. and Bifidobacterium spp. strains. Elimination of seven species of microorganisms was observed: Streptococcus acidominimus, Streptococcus oralis, Staphylococcus epidermidis, Veillonella parvula, Bifidobacterium breve, Bifidobacterium longum, and Lactobacillus acidophilus.

Thermophysical Properties of Solid and Liquid Ti-6Al-4V (TA6V) Alloy

Science.gov (United States)

Boivineau, M.; Cagran, C.; Doytier, D.; Eyraud, V.; Nadal, M.-H.; Wilthan, B.; Pottlacher, G.

2006-03-01

Ti-6Al-4V (TA6V) titanium alloy is widely used in industrial applications such as aeronautic and aerospace due to its good mechanical properties at high temperatures. Experiments on two different resistive pulse heating devices (CEA Valduc and TU-Graz) have been carried out in order to study thermophysical properties (such as electrical resistivity, volume expansion, heat of fusion, heat capacity, normal spectral emissivity, thermal diffusivity, and thermal conductivity) of both solid and liquid Ti-6Al-4V. Fast time-resolved measurements of current, voltage, and surface radiation and shadowgraphs of the volume have been undertaken. At TU-Graz, a fast laser polarimeter has been used for determining the emissivity of liquid Ti-6Al-4V at 684.5 nm and a differential scanning calorimeter (DSC) for measuring the heat capacity of solid Ti-6Al-4V. This study deals with the specific behavior of the different solid phase transitions (effect of heating rate) and the melting region, and emphasizes the liquid state ( T > 2000 K).

Biocompatibility and Corrosion Protection Behaviour of Hydroxyapatite Sol-Gel-Derived Coatings on Ti6Al4V Alloy

Science.gov (United States)

El Hadad, Amir A.; Peón, Eduardo; García-Galván, Federico R.; Barranco, Violeta; Parra, Juan; Jiménez-Morales, Antonia; Galván, Juan Carlos

2017-01-01

The aim of this work was to prepare hydroxyapatite coatings (HAp) by a sol-gel method on Ti6Al4V alloy and to study the bioactivity, biocompatibility and corrosion protection behaviour of these coatings in presence of simulated body fluids (SBFs). Thermogravimetric/Differential Thermal Analyses (TG/DTA) and X-ray Diffraction (XRD) have been applied to obtain information about the phase transformations, mass loss, identification of the phases developed, crystallite size and degree of crystallinity of the obtained HAp powders. Fourier Transformer Infrared Spectroscopy (FTIR) has been utilized for studying the functional groups of the prepared structures. The surface morphology of the resulting HAp coatings was studied by Scanning Electron Microscopy (SEM). The bioactivity was evaluated by soaking the HAp-coatings/Ti6Al4V system in Kokubo’s Simulated Body Fluid (SBF) applying Inductively Coupled Plasma (ICP) spectrometry. 3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyl tetrazolium bromide (MTT) and Alamar blue cell viability assays were used to study the biocompatibility. Finally, the corrosion behaviour of HAp-coatings/Ti6Al4V system was researched by means of Electrochemical Impedance Spectroscopy (EIS). The obtained results showed that the prepared powders were nanocrystalline HAp with little deviations from that present in the human bone. All the prepared HAp coatings deposited on Ti6Al4V showed well-behaved biocompatibility, good bioactivity and corrosion protection properties. PMID:28772455

Biocompatibility and Corrosion Protection Behaviour of Hydroxyapatite Sol-Gel-Derived Coatings on Ti6Al4V Alloy

Directory of Open Access Journals (Sweden)

Amir A. El Hadad

2017-01-01

Full Text Available The aim of this work was to prepare hydroxyapatite coatings (HAp by a sol-gel method on Ti6Al4V alloy and to study the bioactivity, biocompatibility and corrosion protection behaviour of these coatings in presence of simulated body fluids (SBFs. Thermogravimetric/Differential Thermal Analyses (TG/DTA and X-ray Diffraction (XRD have been applied to obtain information about the phase transformations, mass loss, identification of the phases developed, crystallite size and degree of crystallinity of the obtained HAp powders. Fourier Transformer Infrared Spectroscopy (FTIR has been utilized for studying the functional groups of the prepared structures. The surface morphology of the resulting HAp coatings was studied by Scanning Electron Microscopy (SEM. The bioactivity was evaluated by soaking the HAp-coatings/Ti6Al4V system in Kokubo’s Simulated Body Fluid (SBF applying Inductively Coupled Plasma (ICP spectrometry. 3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyl tetrazolium bromide (MTT and Alamar blue cell viability assays were used to study the biocompatibility. Finally, the corrosion behaviour of HAp-coatings/Ti6Al4V system was researched by means of Electrochemical Impedance Spectroscopy (EIS. The obtained results showed that the prepared powders were nanocrystalline HAp with little deviations from that present in the human bone. All the prepared HAp coatings deposited on Ti6Al4V showed well-behaved biocompatibility, good bioactivity and corrosion protection properties.

Community oral health literacy: improving use of oral-health care guarantee in children aged 6.

Directory of Open Access Journals (Sweden)

Marco Cornejo-Ovalle

2013-08-01

Full Text Available The assessment of comprehensive oral health care for children aged 6 (GES-6years showed low utilization of this guarantee, with lower use for children from municipal public schools. The empowerment and health literacy of parents improve their role as oral-health promoters for their children. Objective: To implement and to assess a strategy of empowerment and health literacy of the community about their guaranteed health rights to increase the use of GES-6years. Methods: A mixed design. Using qualitative methodology we will design a communication tool, culturally and socially appropriate to be sent to the beneficiary community of this guarantee. Using a nonrandomized community trial, this instrument designed to empower and improve oral health literacy on GES-6 guarantee, will be sent as personalized letter (intervention signed by the mayor of the municipality with a message aimed to children beneficiaries for GES -6years and another addressed to their parents/guardians. Schools would be selected from clusters (communes of the two regions selected for convenience. Communes will be randomly selected amog those whose authorities agree to participate, and will be selected as for intervention or control. Data analysis will assess the differences in the prevalence of use of this guarantee among children from municipal schools belonging to the intervention or control arm.

Preparation a l'Autonomie en Expression Orale. (Preparation for Autonomy in Oral Communication). Melanges Pedagogiques, 1972.

Science.gov (United States)

Boulanger, C.

This article deals with the issue of gaining proficiency in oral expression in a second language. A functional approach to teaching oral proficiency is outlined, an approach which focuses on the audience as a determining factor in the speaker's linguistic output. Claims in the article are based on an experiment in the teaching of oral proficiency…

Synthesis, surface properties and optical characteristics of CuV{sub 2}O{sub 6} nanofibers

Energy Technology Data Exchange (ETDEWEB)

Wang, Fengyun, E-mail: fywang@qdu.edu.cn [College of Physics and Cultivation Base for State Key Laboratory, Qingdao University, Qingdao 266071 (China); Zhang, Hongchao [College of Physics and Cultivation Base for State Key Laboratory, Qingdao University, Qingdao 266071 (China); Liu, Lei [School of Materials Science and Engineering, Shandong University of Science and Technology, Qingdao 266590 (China); Shin, Byoungchul [Electronic Ceramics Center, Dong-Eui University, Busan, 614-714 (Korea, Republic of); Shan, Fukai, E-mail: fkshan@qdu.edu.cn [College of Physics and Cultivation Base for State Key Laboratory, Qingdao University, Qingdao 266071 (China)

2016-07-05

In{sup 3+}-doped CuV{sub 2}O{sub 6} nanofibers were prepared via the hydrothermal synthesis method, which produced fibers with a typical diameter of 100 nm, and a length of 1–5 μm. The nanofibers grew in a preferred [020] direction. The crystal phase together with the structure was studied via X-ray polycrystalline diffraction (XRD) and the Rietveld refinement. The surface characteristics of this nanostructure were measured with a scanning electron microscope (SEM), energy dispersive spectra (EDS), transmission electron microscopy (TEM), and N{sub 2}–adsorption–desorption isotherms. Photo-activities were evaluated by optical absorption, luminescence, and decay behaviors. The band-gap structures and positions were investigated. The vanadate has an efficient optical absorption from the UV to the visible wavelength region with an indirect allowed transition characterized by the narrow gap energy of 1.96 eV. The photocatalysis was investigated by the photo-degradation of RhB solutions irradiated by visible light. Correspondingly, CuV{sub 2}O{sub 6}:In{sup 3+} nanofibers possess quenched luminescence and have a more efficient photocatalytic activity on the RhB degradation. Photocatalytic mechanisms were proposed based on the experimental results, the band-energy positions, and the trapping experiments. The coexistence of V{sup 4+}/V{sup 5+} ions and induced-color centers was discussed on the proposed photocatalytic mechanism. The results demonstrated the promising potency of such In{sup 3+}-doped CuV{sub 2}O{sub 6} nanofibers for technological applications due to their high photo-activity and good cycling performance with the fiber morphology. - Highlights: • Recyclable α-CuV{sub 2}O{sub 6} nanofibers were successfully prepared via hydrothermal synthesis. • In-doped α-CuV{sub 2}O{sub 6} as a visible-light-driven photocatalyst was firstly developed. • The nanofibers display typical indirect allowed transitions with narrow band of 1.96 eV. • It presents

Wear behaviour of the couple polyethylene Ti6Al4V: Effects of the metallic surface preparation and nitrogen implantation

Science.gov (United States)

Martinella, R.; Giovanardi, S.; Palombarini, G.; Corchia, M.; Delogu, P.; Giorgi, R.; Tosello, C.

The wear behaviour improvement of the tribological couple Ti6Al4V-UHMWPE is of great interest to the medical field. Wear tests were carried out in water on a reciprocating UHMWPE annulus on implanted Ti6Al4V disc tribotestcr, with loads and velocities simulating those of hip joints. A comparison of wear behaviours was also carried out between untreated Ti6Al4V samples and Ti6Al4V subjected to a special lapping procedure. UHMWPE worn against ion-implanted and especially lapped Ti alloy showed the lowest wear rate, while, the highest (about one order of magnitude) was shown by the UHMWPE against untreated Ti6Al4V samples. XPS and AES surface analyses were carried out on metallic discs to examine the chemical composition of the surface before wear tests. Moreover depth distribution of nitrogen in implanted samples was determined using the same techniques. SEM observations displayed a polyethylene transfer film on all metallic surfaces, particularly on untreated Ti6Al4V samples. A discussion about uselessness of more conventional surface treatments for the Ti alloy is also reported.

[Establishment of modern multi-component sustained-release preparations of oral traditional Chinese medicines].

Science.gov (United States)

Xia, Hai-Jian; Zhang, Zhen-Hai; Liu, Dan; Yu, Dan-Hong; Jia, Xiao-Bin

2013-10-01

Traditional Chinese medicines have a long history, with a large quantity of efficient traditional Chinese medicines and prescriptions. However, the vast majority of pharmaceutical dose forms remain common preparations, with very few efficient, long-lasting and low-dose preparations. The sustain-release preparation allows sustained drug release in a longer period of time, maintains blood drug concentration, reduces the toxic effect and medication frequency, and improves medication compliance. Unlike monomer drugs, the material base of traditional Chinese medicine and compounds is multi-component, instead of single or several active monomers. Therefore, under the guidance of the Chinese medicine theories, modern multi-component sustained-release preparations were developed for oral traditional Chinese medicines, with the aim of finally improving the clinical efficacy of traditional Chinese medicines.

Preparation and investigation of Ulex europaeus agglutinin I-conjugated liposomes as potential oral vaccine carriers.

Science.gov (United States)

Li, KeXin; Chen, DaWei; Zhao, XiuLi; Hu, HaiYang; Yang, ChunRong; Pang, DaHai

2011-11-01

We prepared and optimized Ulex europaeus agglutinin I (UEAI)-modified Bovine serum albumin (BSA)-encapsulating liposomes (UEAI-LIP) as oral vaccine carriers and examined the feasibility of inducing systemic and mucosal immune responses by oral administration of UEAILIP. The prepared systems were characterized in vitro for their average size, zeta potential, encapsulation efficiency (EE%) and conjugation efficiency (CE%). In vitro release studies indicated that the presence of UEAI around the optimized liposomes was able to prevent a burst release of loaded BSA and provide sustained release of the encapsulated protein. In vivo immune-stimulating results in KM mice showed that BSA given intramuscularly generated systemic response only but both systemic and mucosal immune responses could be induced simultaneously in the groups in which BSA-loaded liposomes (LIP) and UEAI-LIP were administered intragastrically. Furthermore, the modification of UEAI on the surface of liposomes could further enhance the IgA and IgG levels obviously. In conclusion, this study demonstrated the high potential of lectin-modified liposomes containing the antigen as carriers for oral vaccine.

Synthesis, surface group modification of 3D MnV2O6 nanostructures and adsorption effect on Rhodamine B

International Nuclear Information System (INIS)

Zhang, Wanqun; Shi, Lei; Tang, Kaibin; Liu, Zhongping

2012-01-01

Highlights: ► Fabrication of urchin-like MnV 2 O 6 with oxygen-containing surface groups. ► Mn 0.5 V 2 O 5 ·nH 2 O as an intermediate product holds the key to the final products. ► 3D architectures of MnV 2 O 6 with oxygen-containing surface groups as sorbent. ► The sorbent shows a good adsorption ability. -- Abstract: Highly uniform 3D MnV 2 O 6 nanostructures modified by oxygen functional groups (-COO-) were successfully prepared in large quantities by an approach involving preparation of vanadyl ethylene glycolate as the precursor. The growth and self-assembly of MnV 2 O 6 nanobelts and nanorods could be readily tuned by additive species and quantities, which brought different morphologies and sizes to the final products. With a focus on the regulation of structure, the formation process of 3D architectures of MnV 2 O 6 by self-assembly of nanobelts was followed by field emission scanning electron microscopy (FE-SEM) and X-ray diffraction (XRD). The consecutive processes of vanadyl ethylene glycolate and benzoyl peroxide assisted formation of layered structure Mn 0.5 V 2 O 5 ·nH 2 O, growth of aligned MnV 2 O 6 nanobelts, and oriented assembly were proposed for the growth mechanism. The band gap vs. different morphology was also studied. Optical characterization of these MnV 2 O 6 with different morphologies showed direct bandgap energies at 1.8–1.95 eV. The adsorption properties of 3D MnV 2 O 6 nanostructures synthesized under different conditions were investigated through the removal test of Rhodamine B in aqueous water, and the 3D nanostructures synthesized with 30 g L −1 benzoyl peroxide showed good adsorption capability of Rhodamine B.

Microstructure and mechanical properties of plasma sprayed HA/YSZ/Ti-6Al-4V composite coatings.

Science.gov (United States)

Khor, K A; Gu, Y W; Pan, D; Cheang, P

2004-08-01

Plasma sprayed hydroxyapatite (HA) coatings on titanium alloy substrate have been used extensively due to their excellent biocompatibility and osteoconductivity. However, the erratic bond strength between HA and Ti alloy has raised concern over the long-term reliability of the implant. In this paper, HA/yttria stabilized zirconia (YSZ)/Ti-6Al-4V composite coatings that possess superior mechanical properties to conventional plasma sprayed HA coatings were developed. Ti-6Al-4V powders coated with fine YSZ and HA particles were prepared through a unique ceramic slurry mixing method. The so-formed composite powder was employed as feedstock for plasma spraying of the HA/YSZ/Ti-6Al-4V coatings. The influence of net plasma energy, plasma spray standoff distance, and post-spray heat treatment on microstructure, phase composition and mechanical properties were investigated. Results showed that coatings prepared with the optimum plasma sprayed condition showed a well-defined splat structure. HA/YSZ/Ti-6Al-4V solid solution was formed during plasma spraying which was beneficial for the improvement of mechanical properties. There was no evidence of Ti oxidation from the successful processing of YSZ and HA coated Ti-6Al-4V composite powders. Small amount of CaO apart from HA, ZrO(2) and Ti was present in the composite coatings. The microhardness, Young's modulus, fracture toughness, and bond strength increased significantly with the addition of YSZ. Post-spray heat treatment at 600 degrees C and 700 degrees C for up to 12h was found to further improve the mechanical properties of coatings. After the post-spray heat treatment, 17.6% increment in Young's modulus (E) and 16.3% increment in Vicker's hardness were achieved. The strengthening mechanisms of HA/YSZ/Ti-6Al-4V composite coatings were related to the dispersion strengthening by homogeneous distribution of YSZ particles in the matrix, the good mechanical properties of Ti-6Al-4V and the formation of solid solution among HA

·The clinical and biochemical effects of two combination oral ...

African Journals Online (AJOL)

1991-04-06

Apr 6, 1991 ... ~a e . ~Iternately to use a monophasic oral contraceptive. ~ntalnlng 30 J.Lg ethinyloestradiol and 150 ",g desogestrel fn a!:oelon, group.A), or a triphasic oral contraceptive contain-. T ... hpoprotein p~ttern indUCed by oral contraceptives cause ... triphasic preparation), except that current cigarette smokers (5.

New vanadium oxides with perovskite type structure: AThV/sub 2/O/sub 6/ (A=Ca,Sr)

Energy Technology Data Exchange (ETDEWEB)

Vidyasagar, K; Gopalakrishnan, J

1982-07-01

New perovskite oxides of the formula AThV/sub 2/O/sub 6/ (A=Ca,Sr) have been prepared by reduction of the corresponding AThV/sub 2/O/sub 8/ under hydrogen atmosphere. CaThV/sub 2/O/sub 6/ crystallizes in an orthorhombic LaVO/sub 3/ type structure, while the strontium compound exhibiting cation-deficient nonstoichiometry. SrThsub(1-x)V/sub 2/O/sub 6/ (x approx. 0.4), is cubic. The magnetic susceptibility behaviour of the calcium compound is similar to that of V/sup 3 +/ perovskites, while the strontium compound exhibits a large increase in susceptibility below 130K, the behaviour being likely to be associated with the mixed-valence character of vanadium.

Stability of extemporaneously prepared sodium phenylbutyrate oral suspensions.

Science.gov (United States)

Caruthers, Regine L; Johnson, Cary E

2007-07-15

In an effort to minimize barriers to compliance and adherence and to improve the accuracy of dosage measurement, sugar-containing and sugar-free sodium phenylbutyrate suspensions were formulated, and the stability of these products over a 90-day period was determined. An oral suspension of sodium phenylbutyrate 200 mg/mL was prepared by thoroughly grinding 12 g of Sodium Phenylbutyrate Powder, USP, in a glass mortar. Thirty milliliters of Ora-Plus and 30 mL of either Ora-Sweet or Ora-Sweet SF were mixed and added to the powder to make a final volume of 60 mL. Three identical samples of each formulation were prepared and placed in 2-oz amber plastic bottles with child-resistant caps and were stored at room temperature. A 500-microL sample was withdrawn from each of the six bottles with a micropipette immediately after preparation and at 7, 14, 28, 60, and 90 days. After further dilution to an expected concentration of 100 microg/mL with the mobile phase, the samples were assayed by high-performance liquid chromatography. Stability was defined as the retention of at least 90% of the initial concentration. At least 95% of the initial sodium phenylbutyrate concentration remained throughout the 90-day study period in both preparations. There were no detectable changes in color, odor, taste, and pH and no visible microbial growth in any sample. Extemporaneously compounded suspensions of sodium phenylbutyrate, 200 mg/mL, in a 1:1 mixture of Ora-Plus and Ora-Sweet or Ora-Sweet SF were stable for at least 90 days when stored in 2-oz amber plastic bottles at room temperature.

Enhancement of oral bioavailability of doxorubicin through surface modified biodegradable polymeric nanoparticles.

Science.gov (United States)

Ahmad, Niyaz; Ahmad, Rizwan; Alam, Md Aftab; Ahmad, Farhan Jalees

2018-05-23

Doxorubicin hydrochloride (DOX·HCl), an anthracycline glycoside antibiotic, exhibits low oral bioavailability due to active efflux from intestinal P-glycoprotein receptors. The oral administration of DOX remains a challenge hence; no oral formulation for DOX is marketed, till date. To improve the oral bioavailability of DOX through, preparation of a nanoformulation i.e. PEGylated-doxorubicin(DOX)-loaded-poly-lactic-co-glycolic acid (PLGA)-Nanoparticles (NPs) and to develop and validate an ultra-high performance liquid chromatography electrospray ionization-synapt mass spectrometric bioanalytical method (UHPLC/ESI-QTOF-MS/MS) for plasma (Wistar rats) DOX quantification. For chromatography, Waters ACQUITY UPLC™ along with a BEH C-18 column (2.1 mm × 100 mm; 1.7 μm), mobile phase conditions (acetonitrile: 0.1% formic acid::1:1 v/v) and flow rate (0.20 ml/min) was used. For analyte recovery from rat plasma, a liquid-liquid extraction method (LLE), using Acetonitrile: 5 mM ammonium acetate in a ratio of 6:4 v/v at pH 3.5, was used. Nanoformulation with a particle size (183.10 ± 7.41 nm), zeta potential (- 13.10 ± 1.04 mV), drug content (42.69 ± 1.97 µg/mg) and a spherical shape and smooth surface was developed. An elution time of 1.61 and 1.75 min along with a transition at m/z 544.42/397.27 and 528.46/321.41 were observed for DOX and internal standard (IS) Daunorubicin, respectively. In addition, a linear dynamic range with r 2  ≥ 0.9985 over a concentration range of 1.00-2500.0 ng/ml was observed for different processes and parameters used in the study. Similarly a marked improvement i.e. 6.8 fold was observed, in PEGylated-DOX-PLGA-NPs as compared to DOX-S, in pharmacokinetics studies. The promising approach of PEGylated-DOX-PLGA-NPs may provide an alternate to intravenous therapy for better patient care.

Preparation and electrochemical performance of AgxLi1-xV3O8

International Nuclear Information System (INIS)

Sun Junli; Jiao Lifang; Yuan Huatang; Liu Li; Wei Xin; Miao Yanli; Yang Lin; Wang Yongmei

2009-01-01

We report here the preparation of Ag-doped LiV 3 O 8 for use as a cathode material in rechargeable lithium ion batteries. Synthesis was carried out by sol-gel methods and low temperature calcination using V 2 O 5 wet gel, LiOH.H 2 O, and AgNO 3 as raw materials. The product was characterized by X-ray diffraction (XRD), and its electrochemical behavior as a cathode material was studied by galvanostatic charge-discharge, cyclic voltammetry, and ac impedance techniques. The experimental results show that Ag-doped LiV 3 O 8 cathodes have greater initial discharge capacity than undoped cathode. And those Ag-doped LiV 3 O 8 electrodes, especially Ag 0.04 Li 0.96 V 3 O 8 , show the best long-life cycling performance. All of the doped powders show better stability at the 2.6 V plateau efficiency, due to their more stable cell impedance

21 CFR 201.306 - Potassium salt preparations intended for oral ingestion by man.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 4 2010-04-01 2010-04-01 false Potassium salt preparations intended for oral ingestion by man. 201.306 Section 201.306 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL LABELING Specific Labeling Requirements for Specific Drug Products § 201.306 Potassium salt...

Preparing for 1000 GeV physics at Fermilab

International Nuclear Information System (INIS)

Anon.

1980-01-01

The superconducting proton beams and the neutrino beams at Fermilab prepared for the research with 1000 GeV colliding proton and antiproton beams are described. Especially a new developed helium transfer line is described. (HSI).

Synthesis and Electrochemical Properties of Fe-doped V6O13 as Cathode Material for Lithium-ion Battery

Directory of Open Access Journals (Sweden)

YUAN Qi

2018-01-01

Full Text Available Fe-doped V6O13 was synthesized via a facile hydrothermal method after preparing precursor in order to improve the discharge capacity and cycle performance of V6O13 cathode material at high-lithium state. XRD, SEM and XPS were employed to characterize the phase, morphology and valence of the Fe-doped V6O13. Meanwhile, the electrochemical performance was analyzed and researched. Different morphologies and electrochemical performances of Fe-doped V6O13 were obtained via doping different contents of Fe3+ ion. The sample 0.02 presented the largest thickness of nanosheets (the thickness of 600-900nm and clearance between layers. The Fe-doped V6O13 has a better electrochemical performance than that of pure V6O13. The sample 0.02 exhibits the best electrochemical performance, the initial discharge specific capacity is 433mAh·g-1 and the capacity retention is 47.1% after 100 cycles.

255Gy irradiated tachyzoites of Toxoplasma gondii induce intestinal immune response in C57BL/6J immunized by oral route

Energy Technology Data Exchange (ETDEWEB)

Galisteo Junior, Andres Jimenez; Alves, Janaina Baptista [Instituto de Pesquisas Energeticas e Nucleares (IPEN), Sao Paulo, SP (Brazil). Lab. de Biologia Molecular]. E-mail: galisteo@usp.br; Hiramoto, Roberto Mitsuyoshi [Instituto Adolfo Lutz, Sao Paulo, SP (Brazil). Secao de Parasitoses Sistemicas]. E-mail: hiramoto@usp.br; Carmo, Claudia Villano do; Andrade Junior, Heitor Franco de [Instituto de Medicina Tropical de Sao Paulo, Sao Paulo, SP (Brazil). Lab. de Protozoologia]. E-mail: hfandrad@usp.br

2005-07-01

Toxoplasmosis, a prevalent widespread infection in man and animals, occurs mainly through ingestion of water and food contaminated with oocyst from cat feces, causing usually benign disease in humans, except in intrauterine fetal infection or in immunodeficient patients. We study the oral route for the development of a vaccine for toxoplasmosis, using parasites irradiated with 60 Cobalt, as an alternative for vaccine development to this worldwide parasitic infection. We evaluated the development of immunity at serum or mucosal levels, and their efficiency in protect the mice against challenge with oral cysts of the ME-49 strain. C57Bl/6j isogenic mice were immunized by oral route with 10{sup 7} 255 Gy irradiated tachyzoites from RH strain, at several protocols using milk as anti-peptic adjuvant and alum hydroxide as antacid. The preparations of irradiated tachyzoites induced production of serum IgG and IgA in immunized mice, as determined by ELISA, with IgG2a as the dominant subclass, similar to chronic infection. Their use with adjuvant allowed the excretion of significant amounts of IgA in stools also IgG, despite a lesser extent. All oral preparations induced some quantitative protection against challenge, which was similar to the parenteral route only isolated alum hydroxide was used as adjuvant. All these data support the possibility of the development of an oral vaccine against toxoplasmosis, using irradiated tachyzoites, which would be possible tool in near future for use in field baits, for immunizing either domestic or wild felids. (author)

255Gy irradiated tachyzoites of Toxoplasma gondii induce intestinal immune response in C57BL/6J immunized by oral route

International Nuclear Information System (INIS)

Galisteo Junior, Andres Jimenez; Alves, Janaina Baptista; Hiramoto, Roberto Mitsuyoshi; Carmo, Claudia Villano do; Andrade Junior, Heitor Franco de

2005-01-01

Toxoplasmosis, a prevalent widespread infection in man and animals, occurs mainly through ingestion of water and food contaminated with oocyst from cat feces, causing usually benign disease in humans, except in intrauterine fetal infection or in immunodeficient patients. We study the oral route for the development of a vaccine for toxoplasmosis, using parasites irradiated with 60 Cobalt, as an alternative for vaccine development to this worldwide parasitic infection. We evaluated the development of immunity at serum or mucosal levels, and their efficiency in protect the mice against challenge with oral cysts of the ME-49 strain. C57Bl/6j isogenic mice were immunized by oral route with 10 7 255 Gy irradiated tachyzoites from RH strain, at several protocols using milk as anti-peptic adjuvant and alum hydroxide as antacid. The preparations of irradiated tachyzoites induced production of serum IgG and IgA in immunized mice, as determined by ELISA, with IgG2a as the dominant subclass, similar to chronic infection. Their use with adjuvant allowed the excretion of significant amounts of IgA in stools also IgG, despite a lesser extent. All oral preparations induced some quantitative protection against challenge, which was similar to the parenteral route only isolated alum hydroxide was used as adjuvant. All these data support the possibility of the development of an oral vaccine against toxoplasmosis, using irradiated tachyzoites, which would be possible tool in near future for use in field baits, for immunizing either domestic or wild felids. (author)

Characterization of 2 MeV, 4 MeV, 6 MeV and 18 MeV buildup caps for use with a 0.6 cubic centimeter thimble ionization chamber

International Nuclear Information System (INIS)

Salyer, R.L.; VanDenburg, J.W.; Prinja, A.K.; Kirby, T.; Busch, R.; Hong-Nian Jow

1996-07-01

The purpose of this research is to characterize existing 2 MeV, 4 MeV and 6 MeV buildup caps, and to determine if a buildup cap can be made for the 0.6 cm 3 thimble ionization chamber that will accurately measure exposures in a high-energy photon radiation field. Two different radiation transport codes were used to computationally characterize existing 2 MeV, 4 MeV, and 6 MeV buildup caps for a 0.6 cm 3 active volume thimble ionization chamber: ITS, The Integrated TIGER Series of Coupled Electron-Photon Monte Carlo Transport Codes; and CEPXS/ONEDANT, A One-Dimensional Coupled Electron-Photon Discrete Ordinates Code Package. These codes were also used to determine the design characteristics of a buildup cap for use in the 18 MeV photon beam produced by the 14 TW pulsed power HERMES-III electron accelerator. The maximum range of the secondary electron, the depth at which maximum dose occurs, and the point where dose and collision kerma are equal have been determined to establish the validity of electronic equilibrium. The ionization chamber with the appropriate buildup cap was then subjected to a 4 MeV and a 6 MeV bremmstrahlung radiation spectrum to determine the detector response

Preparation and characterization of tetrandrine-phospholipid complex loaded lipid nanocapsules as potential oral carriers

Directory of Open Access Journals (Sweden)

Zhao YQ

2013-10-01

Full Text Available Yi-qing Zhao, Li-ping Wang, Chao Ma, Kun Zhao, Ying Liu, Nian-ping FengSchool of Pharmacy, Shanghai University of Traditional Chinese Medicine, Shanghai, People’s Republic of ChinaBackground: Tetrandrine is an active constituent that is extracted from the root tuber of the Chinese herb Stephania tetrandra S. Moore. It has shown various pharmacological effects, such as antitumor activity, multidrug resistance reversal, and hepatic fibrosis resistance. In clinical applications, it has been used to treat hypertension, pneumosilicosis, and lung cancer. However, the poor water solubility of tetrandrine has limited its application. In this study, a newly emerging oral drug carrier of phospholipid complex loaded lipid nanocapsules was developed to improve the oral bioavailability of tetrandrine.Methods: The phospholipid complex was prepared with the solvent-evaporation method to enhance the liposolubility of tetrandrine. The formation of the phospholipid complex was confirmed with a solubility study, infrared spectroscopy, and a differential scanning calorimetry (DSC analysis. The tetrandrine-phospholipid complex loaded lipid nanocapsules (TPC-LNCs were prepared using the phase inversion method. Lyophilization was performed with mannitol (10% as a cryoprotectant. TPC-LNCs were characterized according to their particle size, zeta potential, encapsulation efficiency, morphology by transmission electron microscopy, and crystallinity by DSC. In addition, the in vitro release of tetrandrine from TPC-LNCs was examined to potentially illustrate the in vivo release behavior. The in vivo bioavailability of TPC-LNCs was studied and compared to tetrandrine tablets in rats.Results: The liposolubility of tetrandrine in n-octanol improved from 8.34 µg/mL to 35.64 µg/mL in the tetrandrine-phospholipid complex. The prepared TPC-LNCs were spherical-shaped particles with a small size of 40 nm and a high encapsulation efficiency of 93.9%. DSC measurements revealed

Integrin αβ1, αvβ, α6β effectors p130Cas, Src and talin regulate carcinoma invasion and chemoresistance

International Nuclear Information System (INIS)

Sansing, Hope A.; Sarkeshik, Ali; Yates, John R.; Patel, Vyomesh; Gutkind, J. Silvio; Yamada, Kenneth M.; Berrier, Allison L.

2011-01-01

Research highlights: → Proteomics of clustered integrin αβ1, α v β, α 6 β receptors in oral carcinoma. → p130Cas, Dek, Src and talin regulate oral carcinoma invasion. → p130Cas, talin, Src and zyxin regulate oral carcinoma resistance to cisplatin. -- Abstract: Ligand engagement by integrins induces receptor clustering and formation of complexes at the integrin cytoplasmic face that controls cell signaling and cytoskeletal dynamics critical for adhesion-dependent processes. This study searches for a subset of integrin effectors that coordinates both tumor cell invasion and resistance to the chemotherapeutic drug cisplatin in oral carcinomas. Candidate integrin effectors were identified in a proteomics screen of proteins recruited to clustered integrin αβ1, α v β or α 6 β receptors in oral carcinomas. Proteins with diverse functions including microtubule and actin binding proteins, and factors involved in trafficking, transcription and translation were identified in oral carcinoma integrin complexes. Knockdown of effectors in the oral carcinoma HN12 cells revealed that p130Cas, Dek, Src and talin were required for invasion through Matrigel. Disruption of talin or p130Cas by RNA interference increased resistance to cisplatin, whereas targeting Dek, Src or zyxin reduced HN12 resistance to cisplatin. Analysis of the spreading of HN12 cells on collagen I and laminin I revealed that a decrease in p130Cas or talin expression inhibited spreading on both matrices. Interestingly, a reduction in zyxin expression enhanced spreading on laminin I and inhibited spreading on collagen I. Reduction of Dek, Src, talin or zyxin expression reduced HN12 proliferation by 30%. Proliferation was not affected by a reduction in p130Cas expression. We conclude that p130Cas, Src and talin function in both oral carcinoma invasion and resistance to cisplatin.

Design of a formulation for the preparation of 99m Tc-(V)-Dmsa and 186 Re-(V)-Dmsa

International Nuclear Information System (INIS)

Marquez L, M.B.

1998-01-01

Among the radiopharmaceuticals used for neoplasia, we can find the dimercaptosuccinic acid (Dmsa) labelled with 99m Tc and 186/188 Re. Initially, the 99m Tc-(III)-Dmsa was employed as a renal image agent. Nevertheless, when it is prepared into a basic solution, the 99m Tc-(V)-Dmsa complex is produced in high yield being cumulated by cells with a great metabolic activity. This property makes it a useful radiopharmaceutical for the detection of medullary thyroid carcinoma (MTC), soft-tissue tumors and other head and neck tumors. On the other hand, the renewed interest in β - emitting radionuclides, suggests that the 186 Re-(V)-Dmsa complex could be used as antineoplastic agent in therapy. However, the techniques reported for the preparation of these compounds lack of stability studies and they are still in process of investigation, compromising to continue on the development of the radiopharmaceuticals by introducing new possibilities for better products already known, obtaining in this way, the approximation to the ideal radiopharmaceutical. The objective of this work is to design a freeze dried kit formulation for the instant preparation of 99m Tc-(V)-Dmsa and 186 Re-(V)-Dmsa complexes useful in the diagnostic and therapy of soft-tissue tumors and other head and neck tumors. We obtained a freeze dried stable formulation for the preparation of 99m Tc-(V)-Dmsa kit with a radiochemical purity higher than 90 %, which fulfills with the quality control of radiopharmaceuticals. Furthermore, we developed analytical techniques for the determination of the different chemical compounds into the lyophilized kit. On the other hand, we obtained the optimum conditions for preparation of 186 Re-(V)-Dmsa complex in high radiochemical yields (>90%). (Author)

Oxycodone physical dependence and its oral self-administration in C57BL/6J mice.

Science.gov (United States)

Enga, Rachel M; Jackson, Asti; Damaj, M Imad; Beardsley, Patrick M

2016-10-15

Abuse of prescription opioids, such as oxycodone, has markedly increased in recent decades. While oxycodone's antinociceptive effects have been detailed in several preclinical reports, surprisingly few preclinical reports have elaborated its abuse-related effects. This is particularly surprising given that oxycodone has been in clinical use since 1917. In a novel oral operant self-administration procedure, C57BL/6J mice were trained to self-administer water before introducing increasing concentrations of oxycodone (0.056-1.0mg/ml) under post-prandial conditions during daily, 3-h test sessions. As the concentration of oxycodone increased, the numbers of deliveries first increased, then decreased in an inverted U-shape fashion characteristic of the patterns of other drugs self-administered during limited access conditions. After post-prandial conditions were removed, self-administration at the highest concentration was maintained suggesting oral oxycodone served as a positive reinforcer. In other mice, using a novel regimen of physical dependence, mice were administered increasing doses of oxycodone (9.0-33.0mg/kg, s.c.) over 9 days, challenged with naloxone (0.1-10.0mg/kg, s.c.), and then observed for 30min. Naloxone dose-dependently increased the observed number of somatic signs of withdrawal, suggesting physical dependence of oxycodone was induced under this regimen. This is the first report demonstrating induction of oral operant self-administration of oxycodone and dose-dependent precipitations of oxycodone withdrawal in C57BL/6J mice. The use of oral operant self-administration as well as the novel physical dependence regimen provides useful approaches to further examine the abuse- and dependence-related effects of this highly abused prescription opioid. Copyright © 2016 Elsevier B.V. All rights reserved.

Synthesis and microstructure characterization of Ni-Cr-Co-Ti-V-Al high entropy alloy coating on Ti-6Al-4V substrate by laser surface alloying

International Nuclear Information System (INIS)

Cai, Zhaobing; Jin, Guo; Cui, Xiufang; Liu, Zhe; Zheng, Wei; Li, Yang; Wang, Liquan

2016-01-01

Ni-Cr-Co-Ti-V-Al high-entropy alloy coating on Ti-6Al-4V was synthesized by laser surface alloying. The coating is composed of a B2 matrix and (Co, Ni)Ti 2 compounds with few β-Ti phases. Focused ion beam technique was utilized to prepare TEM sample and TEM observations agree well with XRD and SEM results. The formation of HEA phases is due to high temperature and rapid cooling rate during laser surface alloying. The thermodynamic parameters, ΔH mix , ΔS mix and δ as well as Δχ, should be used to predict the formation of the BCC solid solution, but they are not the strict criteria. Especially when Δχ reaches a high value (≥ 10%), BCC HEA will be partially decomposed, leading to the formation of (Co, Ni)Ti 2 compound phases. - Highlights: •Preparing HEA coating on Ti-6Al-4V by laser surface alloying is successful. •The synthesized HEA coating mainly consists of BCC HEA and (Co, Ni)Ti 2 compounds. •FIB technology was used to prepare the sample for TEM analysis. • ΔH mix , ΔS mix and δ as well as Δχ, should be all used to predict the formation of solid solution.

The Fifth German Oral Health Study (Fünfte Deutsche Mundgesundheitsstudie, DMS V) - rationale, design, and methods.

Science.gov (United States)

Jordan, Rainer A; Bodechtel, Constanze; Hertrampf, Katrin; Hoffmann, Thomas; Kocher, Thomas; Nitschke, Ina; Schiffner, Ulrich; Stark, Helmut; Zimmer, Stefan; Micheelis, Wolfgang

2014-12-29

Oral diseases rank among the most prevalent non-communicable diseases in modern societies. In Germany, oral epidemiological data show that both dental caries and periodontal diseases are highly prevalent, though significant improvements in oral health has been taking in the population within the last decades, particularly in children. It is, therefore, the aim of the Fifth German Oral Health Study (DMS V) to actualize the data on current oral health status and to gather information on oral health behavior and risk factors. In addition to current oral health monitoring, the study will also permit conclusions about trends in the development of oral health in Germany between 1989 and 2014. DMS V is a cross-sectional, multi-center, nationwide representative, socio-epidemiological study to investigate the oral health status und behavior of the German resident population in four age cohorts. Study participants are children (12-year-olds), adults (35- to 44-year-olds), young olds (65- to 74-year-olds), and old olds (75- to 100-year-olds) who are drawn from local residents' registration offices. Social-science investigation parameters concern subjective perceptions and attitudes regarding oral health and nutrition, sense of coherence, and socio-demographic data. Clinical oral parameters are tooth loss, caries and periodontitis, prosthodontic status, further developmental and acquired dental hard tissue and mucosal lesions. To ensure reproducibility, the dental investigators are trained and calibrated by experts and multiple reliability checks are performed throughout the field phase. Statistical analyses are calculated according to a detailed statistical analysis plan. The DMS studies first performed in 1989, 1992 and repeated in 1997 and 2005 are the only cross-sectional oral health studies conducted in Germany on a population-based national representative level. Updated prevalence and trend analyses of key oral diseases are, therefore, of major epidemiological and health

The hospital preparation of radiopharmaceuticals

International Nuclear Information System (INIS)

The subject is covered in sections: introduction; preparation ((general - sterilization), production areas (laboratories), working methods for injections, working methods for oral preparations and iodination procedures); analytical testing (general, standards common to injections and oral preparations, standards for injections, standards for oral preparations); reliable methods of preparing sup(99m)Tc-radiopharmaceuticals and 51 Cr-red cells; commercial radiopharmaceutical kits. (U.K.)

Evaluation of the pharmaceutical quality of some quinine preparations sold in Nigeria.

Science.gov (United States)

Nnamdi, Jolly A; Arhewoh, Ikhuoria M; Okhamafe, Augustine O; Enato, Ehijie F O

2009-01-01

The purpose of this study was to determine the pharmaceutical quality of quinine preparations sold in Nigerian markets. The organoleptic and physicochemical properties of quinine tablets, as well as oral liquids and parenteral quinine preparations, were assessed according to British Pharmacopoeia (BP) and unofficial standards as recommended by the manufacturers. Of the 6 brands of tablets assessed, 4 passed the uniformity of content test and 5 the disintegration test, but only 2 the dissolution test. The pH of 2 of the 6 brands of oral liquid preparations met BP standards, while only 1 oral liquid met the BP standard for percentage content. The assay further demonstrated that 4 brands of the parenteral preparations met BP standards for quinine content. All the parenteral preparations were found to be sterile. Quinine preparations sold in Nigeria varied considerably in their pharmaceutical quality. A strict check of the quality of brands of quinine by regulatory agencies and distributors before they are sold to the public is therefore recommended. Copyright 2009 S. Karger AG, Basel.

On the preparation of fine V8C7-WC and V4C3-WC powders

CSIR Research Space (South Africa)

Osborne, C

1997-01-01

Full Text Available The aim of this work was to produce V8C7-WC and V4C3-WC powders with grain size between 1 and 2mu-m, as a first stage of the preparation of fine grained WC-VC-Co hardmetal. V8C7-WC powder was produced via two routes: starting from preformed V8C7...

V-amylose structural characteristics, methods of preparation, significance, and potential applications

CSIR Research Space (South Africa)

Obiro, WC

2012-02-01

Full Text Available , and postprandial hyperglycaemia in diabetics. Various aspects of V-amylose structure, methods of preparation, factors that affect its formation, and the significance and potential applications of the V-amylose complexes are reviewed....

Interleukin-6 secreted by oral cancer- associated fibroblast accelerated VEGF expression in tumor and stroma cells.

Science.gov (United States)

Mirkeshavarz, M; Ganjibakhsh, M; Aminishakib, P; Farzaneh, P; Mahdavi, N; Vakhshiteh, F; Karimi, A; Gohari, N S; Kamali, F; Kharazifard, M J; Shahzadeh Fazeli, S A; Nasimian, A

2017-10-31

Oral cancer represents the sixth most common cancer type worldwide. Patients with oral cancer express high levels of IL-6 which is associated with very poor prognosis. Previous studies illustrated that IL-6 cytokine induces angiogenesis. It has also been reported that the presence of Cancer- Associated Fibroblasts (CAFs) is essential for angiogenesis. In this study, we examined the correlation between IL-6 and CAF and the role of this correlation on VEGF production. In this study, quantitative expression level of IL-6 and VEGF in CAF and Oral Cancer Cells (OCCs) examined through Real Time PCR and ELISA and western blot analysis. In addition, maintenance and retention of IL-6 and VEGF checked out in co-culture experiment of CAF and OCC cells. These experiments demonstrated that in oral cancer, CAF cell line secretes significantly more IL-6 than OCC. Also IL-6 is a factor that causes VEGF secretion in CAF cell line. CAF is the basic and the most essential source for producing IL-6 in patients with oral cancer. Secreted IL-6 is able to induce VEGF production in both CAF and OCCs. Correlation between CAF, IL-6 and VEGF could be considered as an approach for cancer therapy.

LHC Report: First stable beams at 6.5 TeV

CERN Multimedia

Mike Lamont, Jorg Wenninger, Jan Uythoven, Stefano Redaelli, Wolfgang Hofle and Massimo Giovannozzi for the LHC team

2015-01-01

Give or take some important loose ends, the morning of Wednesday, 3 June saw the nominal end of an intense eight weeks of beam commissioning and the delivery of the first stable beams at 6.5 TeV. Under the gaze of the media, 3 nominal bunches per beam were taken through the full cycle into collisions. This was followed by the declaration of stable beams, marking the start of Run 2 physics data-taking.   The scenes in the CCC as stable beams at an energy of 6.5 TeV marked the start of run 2 physics at the LHC. The final stages of preparation involved the set-up of the tertiary collimators. These are situated on the incoming beam about 120 to 140 m from the interaction point where the beams are still in separate beam pipes. As the local orbit changes in this region during the squeeze and after the collapse of the separation bumps, the tertiary collimators set-up with respect to the beam is required both at the end of the squeeze and with colliding beams. The orbit and optics at the main collima...

Compressive Strength Evaluation in Brazed ZrO2/Ti6Al4V Joints Using Finite Element Analysis

Science.gov (United States)

Sharma, Ashutosh; Kee, Se Ho; Jung, Flora; Heo, Yongku; Jung, Jae Pil

2016-05-01

This study aims to synthesize and evaluate the compressive strength of the ZrO2/Ti-6Al-4V joint brazed using an active metal filler Ag-Cu-Sn-Ti, and its application to dental implants assuring its reliability to resist the compressive failure in the actual oral environment. The brazing was performed at a temperature of 750 °C for 30 min in a vacuum furnace under 5 × 10-6 Torr atmosphere. The microstructure of the brazed joint showed the presence of an Ag-rich matrix and a Cu-rich phase, and Cu-Ti intermetallic compounds were observed along the Ti-6Al-4V bonded interface. The compressive strength of the brazed ZrO2/Ti-6Al-4V joint was measured by EN ISO 14801 standard test method. The measured compressive strength of the joint was ~1477 MPa—a value almost five times that of existing dental cements. Finite element analysis also confirmed the high von Mises stress values. The compressive strains in the samples were found concentrated near the Ti-6Al-4V position, matching with the position of the real fractured sample. These results suggest extremely significant compressive strength in ZrO2/Ti-6Al-4V joints using the Ag-Cu-Sn-Ti filler. It is believed that a highly reliable dental implant can be processed and designed using the results of this study.

Integrin {alpha}{beta}1, {alpha}{sub v}{beta}, {alpha}{sub 6}{beta} effectors p130Cas, Src and talin regulate carcinoma invasion and chemoresistance

Energy Technology Data Exchange (ETDEWEB)

Sansing, Hope A. [Department of Oral and Craniofacial Biology, Louisiana State University Health Sciences Center-New Orleans, School of Dentistry, New Orleans, LA (United States); Sarkeshik, Ali; Yates, John R. [Department of Chemical Physiology, Scripps Research Institute, La Jolla, CA (United States); Patel, Vyomesh; Gutkind, J. Silvio [Oral and Pharyngeal Cancer Branch, National Institute of Dental and Craniofacial Research, National Institutes of Health, Bethesda, MD (United States); Yamada, Kenneth M. [Laboratory of Cell and Developmental Biology, National Institute of Dental and Craniofacial Research, National Institutes of Health, Bethesda, MD (United States); Berrier, Allison L., E-mail: allison.berrier@gmail.com [Department of Oral and Craniofacial Biology, Louisiana State University Health Sciences Center-New Orleans, School of Dentistry, New Orleans, LA (United States)

2011-03-11

Research highlights: {yields} Proteomics of clustered integrin {alpha}{beta}1, {alpha}{sub v}{beta}, {alpha}{sub 6}{beta} receptors in oral carcinoma. {yields} p130Cas, Dek, Src and talin regulate oral carcinoma invasion. {yields} p130Cas, talin, Src and zyxin regulate oral carcinoma resistance to cisplatin. -- Abstract: Ligand engagement by integrins induces receptor clustering and formation of complexes at the integrin cytoplasmic face that controls cell signaling and cytoskeletal dynamics critical for adhesion-dependent processes. This study searches for a subset of integrin effectors that coordinates both tumor cell invasion and resistance to the chemotherapeutic drug cisplatin in oral carcinomas. Candidate integrin effectors were identified in a proteomics screen of proteins recruited to clustered integrin {alpha}{beta}1, {alpha}{sub v}{beta} or {alpha}{sub 6}{beta} receptors in oral carcinomas. Proteins with diverse functions including microtubule and actin binding proteins, and factors involved in trafficking, transcription and translation were identified in oral carcinoma integrin complexes. Knockdown of effectors in the oral carcinoma HN12 cells revealed that p130Cas, Dek, Src and talin were required for invasion through Matrigel. Disruption of talin or p130Cas by RNA interference increased resistance to cisplatin, whereas targeting Dek, Src or zyxin reduced HN12 resistance to cisplatin. Analysis of the spreading of HN12 cells on collagen I and laminin I revealed that a decrease in p130Cas or talin expression inhibited spreading on both matrices. Interestingly, a reduction in zyxin expression enhanced spreading on laminin I and inhibited spreading on collagen I. Reduction of Dek, Src, talin or zyxin expression reduced HN12 proliferation by 30%. Proliferation was not affected by a reduction in p130Cas expression. We conclude that p130Cas, Src and talin function in both oral carcinoma invasion and resistance to cisplatin.

Enhanced oral bioavailability of novel mucoadhesive pellets containing valsartan prepared by a dry powder-coating technique

DEFF Research Database (Denmark)

Cao, Qing-Ri; Liu, Yan; Xu, Wei-Juan

2012-01-01

The aim of this study was to develop novel mucoadhesive pellets containing valsartan (VAL) with enhanced oral bioavailability. Two types of VAL loaded core pellets were prepared by an extrusion/spheronization method, and further dry-coated with a mixture of hydroxypropylmethylcellulose (HPMC...

Novel Aggregation Properties of Candida albicans Secreted Aspartyl Proteinase Sap6 Mediate Virulence in Oral Candidiasis.

Science.gov (United States)

Kumar, Rohitashw; Saraswat, Darpan; Tati, Swetha; Edgerton, Mira

2015-07-01

Candida albicans, a commensal fungus of the oral microbiome, causes oral candidiasis in humans with localized or systemic immune deficiencies. Secreted aspartic proteinases (Saps) are a family of 10 related proteases and are virulence factors due to their proteolytic activity, as well as their roles in adherence and colonization of host tissues. We found that mice infected sublingually with C. albicans cells overexpressing Sap6 (SAP6 OE and a Δsap8 strain) had thicker fungal plaques and more severe oral infection, while infection with the Δsap6 strain was attenuated. These hypervirulent strains had highly aggregative colony structure in vitro and higher secreted proteinase activity; however, the levels of proteinase activity of C. albicans Saps did not uniformly match their abilities to damage cultured oral epithelial cells (SCC-15 cells). Hyphal induction in cells overexpressing Sap6 (SAP6 OE and Δsap8 cells) resulted in formation of large cell-cell aggregates. These aggregates could be produced in germinated wild-type cells by addition of native or heat-inactivated Sap6. Sap6 bound only to germinated cells and increased C. albicans adhesion to oral epithelial cells. The adhesion properties of Sap6 were lost upon deletion of its integrin-binding motif (RGD) and could be inhibited by addition of RGD peptide or anti-integrin antibodies. Thus, Sap6 (but not Sap5) has an alternative novel function in cell-cell aggregation, independent of its proteinase activity, to promote infection and virulence in oral candidiasis.

Acute and subchronic oral toxicity studies in rats of a hydrolyzed chicken sternal cartilage preparation.

Science.gov (United States)

Schauss, A G; Merkel, D J; Glaza, S M; Sorenson, S R

2007-02-01

Two acute and subchronic oral toxicity studies were conducted in rats to evaluate safety of a patented preparation of hydrolyzed chicken sternal cartilage (BioCell Collagen II) containing collagen type II, chondroitin sulfate, and hyaluronic acid. In the acute oral toxicity study, five males and five females of Sprague-Dawley rats were administered a single dose of 5000 mg of the test product per kg body weight and observed for 14 days. All animals survived and exhibited normal body weight gain throughout the study. Macroscopic necropsy examination conducted on day 15 revealed no gross pathological lesions in any of the animals. In the subchronic study, Sprague-Dawley rats (40 males, 40 females) were divided into four same-sex groups (10 animals/group). Animals in each group were administered daily either 0, 30, 300 or 1000 mg of the test product per kg of body weight for over 90 days. All animals survived and showed no significant changes in their body weights and histopathology. Although some differences were observed between the treated and control animals in several parameters, they were generally not dose-related or considered to be of toxicological significance. In conclusion, the results from the two oral toxicity studies with male and female young adult rats indicated that the test preparation from hydrolyzed chicken sternal cartilage collagen (BioCell Collagen II) was well tolerated at all four doses tested.

Thiolated Eudragit nanoparticles for oral insulin delivery: preparation, characterization and in vivo evaluation.

Science.gov (United States)

Zhang, Yan; Wu, Xiaorong; Meng, Lingkuo; Zhang, Yu; Ai, Ruiting; Qi, Na; He, Haibing; Xu, Hui; Tang, Xing

2012-10-15

In the present study thiolated Eudragit L100 (Eul) based polymeric nanoparticles (NPs) were employed to develop an oral insulin delivery system. Sulfydryl modification was achieved by grafting cysteine to the carboxylic acid group of Eudragit L100, which displayed maximum conjugate level of 390.3±13.4 μmol thiol groups per gram. Eudragit L100-cysteine (Eul-cys) and Eul nanoparticles were prepared by the precipitation method, in which reversible swelling of pH-sensitive material was used for insulin loading and release. Nanoparticles were characterized in terms of their particle size, morphology, loading efficiency (LE%) and in vitro insulin release behavior. The NPs had an average size of 324.2±39.0 nm and 308.8±35.7 nm, maximal LE% of 92.2±1.7% and 96.4±0.5% for Eul-cys and Eul, respectively. The release profile of NPs in vitro showed pH-dependent behavior. Circular dichroism (CD) spectroscopy analysis proved that the secondary structure of the insulin released from NPs was unchanged compared with native insulin. The mucoadhesion study in vitro showed that Eul-cys NPs produced a 3-fold and 2.8-fold increase in rat jejunum and ileum compared with unmodified polymer NPs, respectively, which was due to the immobilization of thiol groups on Eudragit L100. Oral administration of insulin-loaded Eul-cys NPs produced a higher and prolonged hypoglycemic action, and the corresponding relative bioavailability of insulin was found to be 7.33±0.33%, an increase of 2.8-fold compared with Eul NPs (2.65±0.63%). This delivery system is a promising novel tool to improve the absorption of protein and peptide drugs in the intestinal tract. Copyright © 2012 Elsevier B.V. All rights reserved.

A case of oral-facial-digital syndrome with overlapping manifestations of type V and type VI: a possible new OFD syndrome

International Nuclear Information System (INIS)

Chung Wongyiu; Chung Laupo

1999-01-01

We report a child with clinical and radiological manifestations characteristic of both V'aradi syndrome (oral-facial-digital syndrome type VI) and Thurston syndrome (oral-facial-digital syndrome type V). The findings have not been reported previously, and we believe that it represents a new variant. (orig.)

Preparation and certification of arsenate [As(V)] reference material, NMIJ CRM 7912-a.

Science.gov (United States)

Narukawa, Tomohiro; Kuroiwa, Takayoshi; Narushima, Izumi; Jimbo, Yasujiro; Suzuki, Toshihiro; Chiba, Koichi

2010-05-01

Arsenate [As(V)] solution reference material, National Metrology Institute of Japan (NMIJ) certified reference material (CRM) 7912-a, for speciation of arsenic species was developed and certified by NMIJ, the National Institute of Advanced Industrial Science and Technology. High-purity As(2)O(3) reagent powder was dissolved in 0.8 M HNO(3) solution and As(III) was oxidized to As(V) with HNO(3) to prepare 100 mg kg(-1) of As(V) candidate CRM solution. The solution was bottled in 400 bottles (50 mL each). The concentration of As(V) was determined by four independent analytical techniques-inductively coupled plasma mass spectrometry, inductively coupled plasma optical emission spectrometry, graphite furnace atomic absorption spectrometry, and liquid chromatography inductively coupled plasma mass spectrometry-according to As(V) calibration solutions, which were prepared from the arsenic standard of the Japan Calibration Service system and whose species was guaranteed to be As(V) by NMIJ. The uncertainties of all the measurements and preparation procedures were evaluated. The certified value of As(V) in the CRM is (99.53 +/- 1.67) mg kg(-1) (k = 2).

Synthesis, surface group modification of 3D MnV{sub 2}O{sub 6} nanostructures and adsorption effect on Rhodamine B

Energy Technology Data Exchange (ETDEWEB)

Zhang, Wanqun, E-mail: wqz@ustc.edu.cn [Hefei National Laboratory for Physical Sciences at Micro-scale, University of Science and Technology of China, Hefei, Anhui 230026 (China); Chemical Experimental Teaching Center, University of Science and Technology of China, Hefei, Anhui 230026 (China); Shi, Lei, E-mail: shil@ustc.edu.cn [Hefei National Laboratory for Physical Sciences at Micro-scale, University of Science and Technology of China, Hefei, Anhui 230026 (China); Tang, Kaibin; Liu, Zhongping [Hefei National Laboratory for Physical Sciences at Micro-scale, University of Science and Technology of China, Hefei, Anhui 230026 (China)

2012-07-15

Highlights: ► Fabrication of urchin-like MnV{sub 2}O{sub 6} with oxygen-containing surface groups. ► Mn{sub 0.5}V{sub 2}O{sub 5}·nH{sub 2}O as an intermediate product holds the key to the final products. ► 3D architectures of MnV{sub 2}O{sub 6} with oxygen-containing surface groups as sorbent. ► The sorbent shows a good adsorption ability. -- Abstract: Highly uniform 3D MnV{sub 2}O{sub 6} nanostructures modified by oxygen functional groups (-COO-) were successfully prepared in large quantities by an approach involving preparation of vanadyl ethylene glycolate as the precursor. The growth and self-assembly of MnV{sub 2}O{sub 6} nanobelts and nanorods could be readily tuned by additive species and quantities, which brought different morphologies and sizes to the final products. With a focus on the regulation of structure, the formation process of 3D architectures of MnV{sub 2}O{sub 6} by self-assembly of nanobelts was followed by field emission scanning electron microscopy (FE-SEM) and X-ray diffraction (XRD). The consecutive processes of vanadyl ethylene glycolate and benzoyl peroxide assisted formation of layered structure Mn{sub 0.5}V{sub 2}O{sub 5}·nH{sub 2}O, growth of aligned MnV{sub 2}O{sub 6} nanobelts, and oriented assembly were proposed for the growth mechanism. The band gap vs. different morphology was also studied. Optical characterization of these MnV{sub 2}O{sub 6} with different morphologies showed direct bandgap energies at 1.8–1.95 eV. The adsorption properties of 3D MnV{sub 2}O{sub 6} nanostructures synthesized under different conditions were investigated through the removal test of Rhodamine B in aqueous water, and the 3D nanostructures synthesized with 30 g L{sup −1} benzoyl peroxide showed good adsorption capability of Rhodamine B.

Changing oral health status of 6- and 12-year-old schoolchildren in Portugal

DEFF Research Database (Denmark)

Almeida, C.M.; Petersen, P.E.; André, S.J.

2003-01-01

AIMS: To assess the actual oral health status of Portuguese schoolchildren aged 6 and 12 years according to gender and urbanisation, to highlight the trend over time in dental caries prevalence of children, to assess the dental care habits and the provision of preventive services to children......, and to analyse the effect of dental care habits on caries experience. BASIC RESEARCH DESIGN: Clinical examinations of oral health status were carried out in 1999 according to WHO criteria and included dental caries, enamel lesions, oral hygiene status (OHI-S) and Community Periodontal Index (CPI). Structured...... questionnaires for interviewing children on dental care habits and participation in preventive programmes at school were used. The study comprised 799 6 year olds and 800 12 year olds. RESULTS: In 1999, the prevalence proportion rates of dental caries were 46.9% in 6 year olds and 52.9% in 12 year olds. Dental...

Superior Cycle Stability Performance of Quasi-Cuboidal CoV2O6 Microstructures as Electrode Material for Supercapacitors.

Science.gov (United States)

Wang, Yucheng; Chai, Hui; Dong, Hong; Xu, Jiayu; Jia, Dianzeng; Zhou, Wanyong

2016-10-12

In this study, a rapid, facile, and environment-friendly microwave-assisted method followed by annealing for synthesizing the quasi-cuboidal CoV 2 O 6 is developed. The as-prepared samples manifest high supercapacitor properties with a specific capacitance of 223 F g -1 , good rate capability, and superior cycle stability, retaining 123.3% capacitance when the number of cycles reaches 15,000 after determined by electrochemical tests. More importantly, the quasi-cuboidal CoV 2 O 6 for the first time is introduced into the supercapacitor as a kind of electrode material. The superior electrochemical performance of the quasi-cuboidal CoV 2 O 6 will render the metal vanadium oxides as new and attractive active material for promising application in supercapacitors.

Oral vaccination of wildlife using a vaccinia-rabies-glycoprotein recombinant virus vaccine (RABORAL V-RG®): a global review.

Science.gov (United States)

Maki, Joanne; Guiot, Anne-Laure; Aubert, Michel; Brochier, Bernard; Cliquet, Florence; Hanlon, Cathleen A; King, Roni; Oertli, Ernest H; Rupprecht, Charles E; Schumacher, Caroline; Slate, Dennis; Yakobson, Boris; Wohlers, Anne; Lankau, Emily W

2017-09-22

RABORAL V-RG ® is an oral rabies vaccine bait that contains an attenuated ("modified-live") recombinant vaccinia virus vector vaccine expressing the rabies virus glycoprotein gene (V-RG). Approximately 250 million doses have been distributed globally since 1987 without any reports of adverse reactions in wildlife or domestic animals since the first licensed recombinant oral rabies vaccine (ORV) was released into the environment to immunize wildlife populations against rabies. V-RG is genetically stable, is not detected in the oral cavity beyond 48 h after ingestion, is not shed by vaccinates into the environment, and has been tested for thermostability under a range of laboratory and field conditions. Safety of V-RG has been evaluated in over 50 vertebrate species, including non-human primates, with no adverse effects observed regardless of route or dose. Immunogenicity and efficacy have been demonstrated under laboratory and field conditions in multiple target species (including fox, raccoon, coyote, skunk, raccoon dog, and jackal). The liquid vaccine is packaged inside edible baits (i.e., RABORAL V-RG, the vaccine-bait product) which are distributed into wildlife habitats for consumption by target species. Field application of RABORAL V-RG has contributed to the elimination of wildlife rabies from three European countries (Belgium, France and Luxembourg) and of the dog/coyote rabies virus variant from the United States of America (USA). An oral rabies vaccination program in west-central Texas has essentially eliminated the gray fox rabies virus variant from Texas with the last case reported in a cow during 2009. A long-term ORV barrier program in the USA using RABORAL V-RG is preventing substantial geographic expansion of the raccoon rabies virus variant. RABORAL V-RG has also been used to control wildlife rabies in Israel for more than a decade. This paper: (1) reviews the development and historical use of RABORAL V-RG; (2) highlights wildlife rabies control

Determination of oral bioavailability of curcuminoid dispersions and nanoemulsions prepared from Curcuma longa Linnaeus.

Science.gov (United States)

Lu, Pei Shan; Inbaraj, Baskaran Stephen; Chen, Bing Huei

2018-01-01

Curcuminoid from Curcuma longa Linnaeus has been demonstrated to be effective in anti-cancer and anti-inflammation. The objectives of the present study were to prepare curcuminoid dispersion and nanoemulsion from C. longa and determine their oral bioavailabilities in rats. After curcuminoid extraction using 99.5% ethanol, bisdemethoxycurcumin (BDMC), demethoxycurcumin (DMC) and curcumin were separated within 10 min by high-performance liquid chromatography using an Eclipse XDB-C18 column (Agilent, Palo Alto, CA, USA) and a gradient mobile phase of 0.1% aqueous formic acid and acetonitrile, with a flow rate of 1 mL min -1 , column temperature of 35 °C and detection wavelength of 425 nm. Curcuminoid nanoemulsion at a particle size of 12.1 nm and encapsulation efficiency 98.8% was prepared using lecithin, Tween 80 and water. A pharmacokinetic study in rats revealed that the parameters including T max , C max , t 1/2 and the area under the curve were higher for curcuminoid nanoemulsions than for curcuminoid dispersion at the same dose employed for gavage administration, whereas, for intravenous injection, an opposite trend was shown. The oral bioavailabilities of BDMC, DMC, curcumin and total curcuminoids in nanoemulsion and dispersion were 34.39 and 4.65%, 39.93 and 5.49%, 47.82 and 9.38%, and 46 and 8.7%, respectively. The results of the present study demonstrate a higher oral bioavailability after incorporation of curcuminoid into nanoemulsion, facilitating its application as a botanic drug. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

Preparation for and building of V-1 nuclear power plant

International Nuclear Information System (INIS)

Smatlak, S.; Spirko, M.

1981-01-01

Some findings and problems encountered during the construction of the V-1 nuclear power plant at Jaslovske Bohunice are discussed from the point of view of the investor, mainly problems associated with project preparation and relations between suppliers and the customer. The progress of construction is described and the dates are shown of the main stages of construction and tests. The construction proceeded according to a net diagram and was controlled by the construction management and a coordination group headed by the investor. An international start-up commission was established for the start-up stage. The fields are outlined of the participation and co-operation of Soviet organizations during project preparation, supplies, assembly, start-up, and fuel supplies for the V-1 nuclear power plant. (B.S.)

Preparation of butadiene D{sub 6} -1-1-2-3-4-4; Preparation du butadiene D{sub 6} -1-1-2-3-4-4

Energy Technology Data Exchange (ETDEWEB)

Pichat, L; Chatelain, G [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

1959-07-01

A description of the preparation of butadiene D{sub 6} by dehalogenation of perchlorobutadiene by zinc and heavy water in dioxane. (author) [French] Description de la preparation du butadiene D{sub 6} par reduction deshalogenante du perchlorobutadiene par le zinc et l'eau lourde dans le dioxane. (auteur)

Human papillomavirus type 16 E6-specific antitumor immunity is induced by oral administration of HPV16 E6-expressing Lactobacillus casei in C57BL/6 mice.

Science.gov (United States)

Lee, Tae-Young; Kim, Yang-Hyun; Lee, Kyung-Soon; Kim, Jeong-Ki; Lee, Il-Han; Yang, Jai-Myung; Sung, Moon-Hee; Park, Jong-Sup; Poo, Haryoung

2010-11-01

Given that local cell-mediated immunity (CMI) against the human papillomavirus type 16 E6 (HPV16 E6) protein is important for eradication of HPV16 E6-expressing cancer cells in the cervical mucosa, the HPV16 E6 protein may be a target for the mucosal immunotherapy of cervical cancer. Here, we expressed the HPV16 E6 antigen on Lactobacillus casei (L. casei) and investigated E6-specific CMI following oral administration of the L. casei-PgsA-E6 to mice. Surface expression of HPV16 E6 antigens was confirmed and mice were orally inoculated with the L. casei-PgsA or the L. casei-PgsA-E6. Compared to the L. casei-PgsA-treated mice, significantly higher levels of serum IgG and mucosal IgA were observed in L. casei-PgsA-E6-immunized mice; these differences were significantly enhanced after boost. Consistent with this, systemic and local CMI were significantly increased after the boost, as shown by increased counts of IFN-gamma-secreting cells in splenocytes, mesenteric lymph nodes (MLN), and vaginal samples. Furthermore, in the TC-1 tumor model, animals receiving the orally administered L. casei-PgsA-E6 showed reduced tumor size and increased survival rate versus mice receiving control (L. casei-PgsA) immunization. We also found that L. casei-PgsA-E6-induced antitumor effect was decreased by in vivo depletion of CD4(+) or CD8(+) T cells. Collectively, these results indicate that the oral administration of lactobacilli bearing the surface-displayed E6 protein induces T cell-mediated cellular immunity and antitumor effects in mice.

Oral administration of formalin killed Vibrio anguillarum cells improves growth and protection against challenge with Vibrio harveyi in banana shrimp.

Science.gov (United States)

Patil, P K; Gopal, C; Panigrahi, A; Rajababu, D; Pillai, S M

2014-03-01

Larval rearing in hatcheries and highly intensive grow-out culture practices followed in shrimp production systems favour the growth of potential pathogenic bacterial loads. This study reports the efficacy of formalin-killed vibrio bacterin on growth, survival and protection to challenge with virulent Vibrio harveyi and Vibrio anguillarum in juveniles of banana shrimp Fenneropenaeus merguiensis. Postlarvae 15 (0·24 ± 0·01 g) were administered orally in different concentrations of bacterial preparation (0, 10(6) , 10(8) , 10(10) and 10(12 ) CFU kg(-1) feed) for a period of 6 weeks. Physicochemical and microbial quality of water in larval rearing tanks, and growth and survival of the postlarvae were monitored at regular intervals, and body composition was estimated at the end of the experiment. Shrimps were challenged with V. harveyi and V. anguillarum, and cumulative mortality was calculated. The group receiving 10(8)  CFU kg(-1) feed showed highest average weight gain (162·66 ± 22·94 mg) and survival (90·33 ± 4·5%) and lowest cumulative mortality following the challenge with V. anguillarum (26%) and V. harveyi (36·67%). The results of the study suggest that formalized vibrio administered orally to F. merguiensis postlarvae could induce both homologous and heterologous protection against V. anguillarum and V. harveyi. 'Vaccination' of shrimp postlarvae at hatcheries would help in preventing the losses due to vibriosis and the most susceptible stages of shrimp development. The study demonstrates the cross-protection offered by the oral feeding of formalin-killed Vibrio anguillarum against pathogenic V. harveyi challenge at the early developmental stages of banana shrimp, Fenneropenaeus merguiensis. © 2013 The Society for Applied Microbiology.

Smad2 and Smad6 as predictors of overall survival in oral squamous cell carcinoma patients

Directory of Open Access Journals (Sweden)

Snitcovsky Igor

2010-05-01

Full Text Available Abstract Background To test if the expression of Smad1-8 mRNAs were predictive of survival in patients with oral squamous cell carcinoma (SCC. Patients and Methods We analyzed, prospectively, the expression of Smad1-8, by means of Ribonuclease Protection Assay in 48 primary, operable, oral SCC. In addition, 21 larynx, 10 oropharynx and 4 hypopharynx SCC and 65 matched adjacent mucosa, available for study, were also included. For survival analysis, patients were categorized as positive or negative for each Smad, according to median mRNA expression. We also performed real-time quantitative PCR (QRTPCR to asses the pattern of TGFβ1, TGFβ2, TGFβ3 in oral SCC. Results Our results showed that Smad2 and Smad6 mRNA expression were both associated with survival in Oral SCC patients. Cox Multivariate analysis revealed that Smad6 positivity and Smad2 negativity were both predictive of good prognosis for oral SCC patients, independent of lymph nodal status (P = 0.003 and P = 0.029, respectively. In addition, simultaneously Smad2- and Smad6+ oral SCC group of patients did not reach median overall survival (mOS whereas the mOS of Smad2+/Smad6- subgroup was 11.6 months (P = 0.004, univariate analysis. Regarding to TGFβ isoforms, we found that Smad2 mRNA and TGFβ1 mRNA were inversely correlated (p = 0.05, R = -0.33, and that seven of the eight TGFβ1+ patients were Smad2-. In larynx SCC, Smad7- patients did not reach mOS whereas mOS of Smad7+ patients were only 7.0 months (P = 0.04. No other correlations were found among Smad expression, clinico-pathological characteristics and survival in oral, larynx, hypopharynx, oropharynx or the entire head and neck SCC population. Conclusion Smad6 together with Smad2 may be prognostic factors, independent of nodal status in oral SCC after curative resection. The underlying mechanism which involves aberrant TGFβ signaling should be better clarified in the future.

Antibiogram pattern of oral microflora in periodontic children of age group 6 to 12 years: a clinicomicrobiological study.

Science.gov (United States)

Fysal, N; Jose, Santhosh; Kulshrestha, Reena; Arora, Dimple; Hafiz, Ka Abdul; Vasudevan, Sanjay

2013-07-01

The study was carried out to see the diversity of oral microflora and its antibiotic sensitivity test in children of age group 6 to 12 years was carried. Total 50 patients of age group 6 to 12 years were analyzed for their oral microflora and then checked for the antibiotic susceptibility test. The samples that were collected were incubated at 37°C for 48 hours. Once dispersed samples were taken and Gram staining was done, also they were spread on to a number of freshly prepared agar plates and incubated to allow cells to form microbial colony. The result showed microflora common in all types, Gram-positive facultative anaerobic rods and cocci. In normal children Gram-positive facultative anaerobic and fermenting cocci were predominant where as in children with caries growth of microbiota that were Gram-negative and positive, capnophilic, motile and anaerobic rods and cocci belonging to members of genera S. mutans and A. actinomycetemcomitans was seen. By the present study it has been concluded that the number of bacteria determined by microscopic counts was twice as high in caries patients as in healthy sites, and also recommended that amoxicillin, ampicillin and amikacin are the most effective antibacterial drugs for the treatment of dental caries.

Improved oral bioavailability of valsartan using proliposomes: design, characterization and in vivo pharmacokinetics.

Science.gov (United States)

Nekkanti, Vijaykumar; Venkatesan, Natarajan; Wang, Zhijun; Betageri, Guru V

2015-01-01

The objective of our investigational work was to develop a proliposomal formulation to improve the oral bioavailability of valsartan. Proliposomes were formulated by thin film hydration technique using different ratios of phospholipids:drug:cholesterol. The prepared proliposomes were evaluated for vesicle size, encapsulation efficiency, morphological properties, in vitro drug release, in vitro permeability and in vivo pharmacokinetics. In vitro drug-release studies were performed in simulated gastric fluid (pH 1.2) and purified water using dialysis bag method. In vitro drug permeation was studied using parallel artificial membrane permeation assay (PAMPA), Caco-2 monolayer and everted rat intestinal perfusion techniques. In vivo pharmacokinetic studies were conducted in male Sprague Dawley (SD) rats. Among the proliposomal formulations, F-V was found to have the highest encapsulation efficiency of 95.6 ± 2.9% with a vesicle size of 364.1 ± 14.9 nm. The in vitro dissolution studies indicated an improved drug release from proliposomal formulation, F-V in comparison to pure drug suspension in both, purified water and pH 1.2 dissolution media after 12 h. Permeability across PAMPA, Caco-2 cell and everted rat intestinal perfusion studies were higher with F-V formulation as compared to pure drug. Following single oral administration of F-V formulation, a relative bioavailability of 202.36% was achieved as compared to pure valsartan.

Subacute (90 days) oral toxicity studies of Kombucha tea.

Science.gov (United States)

Vijayaraghavan, R; Singh, M; Rao, P V; Bhattacharya, R; Kumar, P; Sugendran, K; Kumar, O; Pant, S C; Singh, R

2000-12-01

Kombucha tea (KT) is a popular health beverage and is used as an alternative therapy. KT is prepared by placing the kombucha culture in solution of tea and sugar and allowing to ferment. The inoculum is a fungus consisting of symbiotic colony of yeast and bacteria. KT is consumed in several countries and is believed to have prophylactic and therapeutic benefits in a wide variety of ailments, viz., intestinal disorders, arthritis, ageing and stimulation of immunological system. Though KT is used in several parts of the world its beneficial effects and adverse effects have not been scientifically evaluated. Since there are no animal toxicological data on KT, subacute oral toxicity study was carried out. Five groups of rats were maintained: (a) control group given tap water orally, (b) KT given 2 ml/kg orally, (c) plain tea (PT) given 2 ml/kg orally, (d) KT given in drinking water, 1% (v/v) and (e) PT given in drinking water, 1% (v/v). The rats were given this treatment daily for a period of 90 days. Weekly records of weight, feed intake, water intake and general behaviour were monitored. There was no significant difference in the growth of the animals as evidenced by the progressive body weight change. The organ to body weight ratio and histological evaluation did not show any toxic signs. The haematological and biochemical variables were within the clinical limits. The study indicates that rats fed KT for 90 days showed no toxic effects.

IL-6 inhibits upregulation of membrane-bound TGF-beta 1 on CD4+ T cells and blocking IL-6 enhances oral tolerance

Science.gov (United States)

Kuhn, Chantal; Rezende, Rafael Machado; M'Hamdi, Hanane; da Cunha, Andre Pires; Weiner, Howard L.

2016-01-01

Oral administration of antigen induces regulatory T cells that express latent membrane-bound TGF-beta (LAP) and that have been shown to play an important role in the induction of oral tolerance. We developed an in vitro model to study modulation of LAP+ on CD4+ T cells. The combination of anti-CD3 mAb, anti-CD28 mAb and recombinant IL-2 induced expression of LAP on naïve CD4+ T cells, independent of FoxP3 or exogenous TGF-β. In vitro generated CD4+LAP+FoxP3− T cells were suppressive in vitro, inhibiting proliferation of naïve CD4+ T cells and IL-17A secretion by Th17 cells. Assessing the impact of different cytokines and neutralizing antibodies against cytokines we found that LAP induction was decreased in the presence of IL-6 and IL-21, and to a lesser extent by IL-4 and TNFα. IL-6 abrogated the in vitro induction of CD4+LAP+ T cells by STAT3 dependent inhibition of Lrrc32 (GARP), the adapter protein that tethers TGF-beta to the membrane. Oral tolerance induction was enhanced in mice lacking expression of IL-6R by CD4+ T cells and by treatment of wild-type mice with neutralizing anti-IL-6 mAb. These results suggest that pro-inflammatory cytokines interfere with oral tolerance induction and that blocking the IL-6 pathway is a potential strategy for enhancing oral tolerance in the setting of autoimmune and inflammatory diseases. PMID:28039301

Modification of Ti6Al4V implant surfaces by biocompatible TiO{sub 2}/PCL hybrid layers prepared via sol-gel dip coating: Structural characterization, mechanical and corrosion behavior

Energy Technology Data Exchange (ETDEWEB)

Catauro, Michelina, E-mail: michelina.catauro@unina2.it [Department of Industrial and Information Engineering, Second University of Naples, Via Roma 21, 81031 Aversa (Italy); Bollino, Flavia [Department of Industrial and Information Engineering, Second University of Naples, Via Roma 21, 81031 Aversa (Italy); Giovanardi, Roberto; Veronesi, Paolo [Department of Engineering “Enzo Ferrari”, University of Modena and Reggio Emilia, Via Vivarelli 10, 41125 Modena (Italy)

2017-05-01

Surface modification of metallic implants is a promising strategy to improve tissue tolerance, osseointegration and corrosion resistance of them. In the present work, bioactive and biocompatible organic-inorganic hybrid coatings were prepared using a sol-gel dip coating route. They consist of an inorganic TiO{sub 2} matrix in which different percentages of poly(ε-caprolactone) (PCL), a biodegradable and biocompatible polymer, were incorporated. The coatings were used to modify the surface of Ti6Al4V substrates in order to improve their wear and corrosion resistance. The chemical structure of the coatings was analyzed by attenuated total reflectance (ATR) Fourier transform infrared (FTIR) spectroscopy. Coating microstructure, mechanical properties and ability to inhibit the corrosion of the substrates were evaluated as a function of the PCL amount. Scanning electron microscopy (SEM) showed that the polymer allows to obtain crack-free coatings, but when high percentages were added uncoated areas appear. Nano-indentation tests revealed that, as expected, surface hardness and elastic modulus decrease as the percentage of polymeric matrix increases, but scratch testing demonstrated that the coatings are effective in preventing scratching of the underlying metallic substrate, at least for PCL contents up to 20 wt%. The electrochemical tests (polarization curves acquired in order to evaluate the corrosion resistance) allowed to asses that the coatings have a significant effect in term of corrosion potential (E{sub corr}) but they do not significantly affect the passivation process that titanium undergoes in contact with the test solution used (modified Dulbecco's phosphate-buffered saline or DPBS). - Highlights: • Bioactive TiO{sub 2}/PCL hybrid coatings on Ti6Al4V were prepared via sol-gel dip coating. • Hybrid coatings are crack-free but when 50 wt% PCL was added, uncoated areas appear. • Coating hardness and elastic modulus decrease as the PCL percentage

Preparation and evaluation of chitosan-based nanogels/gels for oral delivery of myricetin.

Science.gov (United States)

Yao, Yashu; Xia, Mengxin; Wang, Huizhen; Li, Guowen; Shen, Hongyi; Ji, Guang; Meng, Qianchao; Xie, Yan

2016-08-25

A novel nanogel/gel based on chitosan (CS) for the oral delivery of myricetin (Myr) was developed and evaluated comprehensively. The particle size of the obtained Myr-loaded CS/β-glycerol phosphate (β-GP) nanogels was in the range of 100-300nm. The rheological tests showed that the sol-gel transition happened when the nanogels were exposed to physiological temperatures, and 3D network structures of the gelatinized nanogels (gels) were confirmed by Scanning Electron Microscopy. Myr was released from CS/β-GP nanogel/gel in acidic buffers via a Fickian mechanism, and this release was simultaneously accompanied by swelling and erosion. Moreover, the nanogel/gel exhibited no cytotoxicity by MTT assay, and the oral bioavailability of Myr in rats was improved with an accelerated absorption rate after Myr was loaded into CS/β-GP nanogel/gel. In summary, all of the above showed that CS/β-GP nanogel/gel was an excellent system for orally delivering Myr. Copyright © 2016 Elsevier B.V. All rights reserved.

Characterization of laser deposited Ti6Al4V/TiC composite powders on a Ti6Al4V substrate

CSIR Research Space (South Africa)

Mahamood, RM

2014-01-01

Full Text Available This paper reports the material characterization of Ti6Al4V/TiC composite produced by laser metal deposition. The Ti6Al4V/TiC composites were deposited with a composition ratio of 50 wt.% Ti64l4V and 50 wt.% TiC. The depositions were achieved...

Solar disinfection of drinking water and oral rehydration solutions

Energy Technology Data Exchange (ETDEWEB)

Acra, A; Raffoul, Z; Karahagopian, Y

1984-01-01

This document provides concise information on oral rehydration therapy for the control of diarrheal diseases in developing countries; however, the main emphasis has been placed on the disinfection of oral rehydration solutions, or the water used in their preparation, as achieved by exposure to sunlight in transparent containers. The fundamental principles of solar energy are presented as well as studies which demonstrate the efficacy of the method. 2 figures, 6 tables.

Investigation of the HA film deposited on the porous Ti6Al4V alloy prepared via additive manufacturing

International Nuclear Information System (INIS)

Surmeneva, M; Chudinova, E; Syrtanov, M; Surmenev, R; Koptioug, A

2015-01-01

This study is focused on the use of radio frequency magnetron sputtering to modify the surface of porous Ti6Al4V alloy fabricated via additive manufacturing technology. The hydroxyapatite (HA) coated porous Ti6Al4V alloy was studied in respect with its chemical and phase composition, surface morphology, water contact angle and hysteresis, and surface free energy. Thin nanocrystalline HA film was deposited while its structure with diamond-shaped cells remained unchanged. Hysteresis and water contact angle measurements revealed an effect of the deposited HA films, namely an increased water contact angle and contact angle hysteresis. The increase of the contact angle of the coating-substrate system compared to the uncoated substrate was attributed to the multiscale structure of the resulted surfaces. (paper)

IL-6 Inhibits Upregulation of Membrane-Bound TGF-β 1 on CD4+ T Cells and Blocking IL-6 Enhances Oral Tolerance.

Science.gov (United States)

Kuhn, Chantal; Rezende, Rafael Machado; M'Hamdi, Hanane; da Cunha, Andre Pires; Weiner, Howard L

2017-02-01

Oral administration of Ag induces regulatory T cells that express latent membrane-bound TGF-β (latency-associated peptide [LAP]) and have been shown to play an important role in the induction of oral tolerance. We developed an in vitro model to study modulation of LAP + on CD4 + T cells. The combination of anti-CD3 mAb, anti-CD28 mAb, and recombinant IL-2 induced expression of LAP on naive CD4 + T cells, independent of Foxp3 or exogenous TGF-β. In vitro generated CD4 + LAP + Foxp3 - T cells were suppressive in vitro, inhibiting proliferation of naive CD4 + T cells and IL-17A secretion by Th17 cells. Assessing the impact of different cytokines and neutralizing Abs against cytokines, we found that LAP induction was decreased in the presence of IL-6 and IL-21, and to a lesser extent by IL-4 and TNF-α. IL-6 abrogated the in vitro induction of CD4 + LAP + T cells by STAT3-dependent inhibition of Lrrc32 (glycoprotein A repetitions predominant [GARP]), the adapter protein that tethers TGF-β to the membrane. Oral tolerance induction was enhanced in mice lacking expression of IL-6R by CD4 + T cells and by treatment of wild-type mice with neutralizing anti-IL-6 mAb. These results suggest that proinflammatory cytokines interfere with oral tolerance induction and that blocking the IL-6 pathway is a potential strategy for enhancing oral tolerance in the setting of autoimmune and inflammatory diseases. Copyright © 2017 by The American Association of Immunologists, Inc.

Microstructure-Tensile Properties Correlation for the Ti-6Al-4V Titanium Alloy

Science.gov (United States)

Shi, Xiaohui; Zeng, Weidong; Sun, Yu; Han, Yuanfei; Zhao, Yongqing; Guo, Ping

2015-04-01

Finding the quantitative microstructure-tensile properties correlations is the key to achieve performance optimization for various materials. However, it is extremely difficult due to their non-linear and highly interactive interrelations. In the present investigation, the lamellar microstructure features-tensile properties correlations of the Ti-6Al-4V alloy are studied using an error back-propagation artificial neural network (ANN-BP) model. Forty-eight thermomechanical treatments were conducted to prepare the Ti-6Al-4V alloy with different lamellar microstructure features. In the proposed model, the input variables are microstructure features including the α platelet thickness, colony size, and β grain size, which were extracted using Image Pro Plus software. The output variables are the tensile properties, including ultimate tensile strength, yield strength, elongation, and reduction of area. Fourteen hidden-layer neurons which can make ANN-BP model present the most excellent performance were applied. The training results show that all the relative errors between the predicted and experimental values are within 6%, which means that the trained ANN-BP model is capable of providing precise prediction of the tensile properties for Ti-6Al-4V alloy. Based on the corresponding relations between the tensile properties predicted by ANN-BP model and the lamellar microstructure features, it can be found that the yield strength decreases with increasing α platelet thickness continuously. However, the α platelet thickness exerts influence on the elongation in a more complicated way. In addition, for a given α platelet thickness, the yield strength and the elongation both increase with decreasing β grain size and colony size. In general, the β grain size and colony size play a more important role in affecting the tensile properties of Ti-6Al-4V alloy than the α platelet thickness.

Comparison of Oral Stereognosis in 6 and 7 Old Normal Children

Directory of Open Access Journals (Sweden)

Amir Shiani

2004-06-01

Full Text Available Objective: This research determined oral stereognosis (form recognition and spent time to recognize in normal children in north and south of Tehran city to use it in assessment and therapy of oral senses and speech in children with articulation disorders. Materials & Methods: This research was done in 200 children who were 6 & 7 years old and normal in Tehran city. 20 items with different shapes were used and children were wanted to recognize the shapes which were put in their mouth and they should choice one of three shapes located in front of them. Responses and the spent time were calculated. Results: The mean scores of form recognition in children of 6 years old is 17/34 and in children of 7 years old is 17/59. There was no significant difference between them in their scores (P=0.31. In addition, the time of formation diagnosis in 6 years old children is 2/67s (seconds and in 7 years old children is 2/82s, there was no significant difference between them (P=0.11.The northern city children responded slower than the other group (P=0.000. The only statistically significant score between two sexes was the time of formation recognition which was shorter in girls relative to the boys (P=0.043. Conclusion: Based on this study, a significant correlation could not be found in ability of oral stereognosis in 6 and 7 years old children. But in south of city children can recognize faster than children in northern city. Based on importance of this sense in speech, we suggest normalization of it in different ages.

V&V of MCNP 6.1.1 Beta Against Intermediate and High-Energy Experimental Data

Energy Technology Data Exchange (ETDEWEB)

Mashnik, Stepan G [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2014-09-08

This report presents a set of validation and verification (V&V) MCNP 6.1.1 beta results calculated in parallel, with MPI, obtained using its event generators at intermediate and high-energies compared against various experimental data. It also contains several examples of results using the models at energies below 150 MeV, down to 10 MeV, where data libraries are normally used. This report can be considered as the forth part of a set of MCNP6 Testing Primers, after its first, LA-UR-11-05129, and second, LA-UR-11-05627, and third, LA-UR-26944, publications, but is devoted to V&V with the latest, 1.1 beta version of MCNP6. The MCNP6 test-problems discussed here are presented in the /VALIDATION_CEM/and/VALIDATION_LAQGSM/subdirectories in the MCNP6/Testing/directory. README files that contain short descriptions of every input file, the experiment, the quantity of interest that the experiment measures and its description in the MCNP6 output files, and the publication reference of that experiment are presented for every test problem. Templates for plotting the corresponding results with xmgrace as well as pdf files with figures representing the final results of our V&V efforts are presented. Several technical “bugs” in MCNP 6.1.1 beta were discovered during our current V&V of MCNP6 while running it in parallel with MPI using its event generators. These “bugs” are to be fixed in the following version of MCNP6. Our results show that MCNP 6.1.1 beta using its CEM03.03, LAQGSM03.03, Bertini, and INCL+ABLA, event generators describes, as a rule, reasonably well different intermediate- and high-energy measured data. This primer isn’t meant to be read from cover to cover. Readers may skip some sections and go directly to any test problem in which they are interested.

Stability of an extemporaneously prepared tadalafil suspension.

Science.gov (United States)

Pettit, Rebecca S; Johnson, Cary E; Caruthers, Regine L

2012-04-01

The stability of an extemporaneously prepared tadalafil oral suspension was studied. An oral suspension of tadalafil 5 mg/mL was prepared by thoroughly grinding 15 20-mg tadalafil tablets in a glass mortar. Thirty milliliters of Ora-Plus and 30 mL of Ora-Sweet were mixed and added to the powder to make a final volume of 60 mL. Three identical samples of the formulation were prepared and placed in 2-oz amber plastic bottles with child-resistant caps and stored at room temperature (23-25 °C). A 1-mL sample was withdrawn from each of the three bottles with a micropipette immediately after preparation and at 7, 14, 28, 57, and 91 days. After double dilution (1:10 and 0.1:5 v/v) to an expected concentration of 10 μg/mL with methanol and mobile phase, respectively, the samples were assayed in duplicate using stability-indicating high-performance liquid chromatography. The samples were visually examined for any color change and evaluated for pH changes on each day of analysis. Taste evaluation was performed at the beginning and end of the study. Stability was defined as the retention of at least 90% of the initial concentration. At least 99% of the initial tadalafil concentration remained throughout the 91-day study period. There were no detectable changes in color, odor, taste, and pH, and no visible microbial growth was observed in any sample. An extemporaneously prepared suspension of tadalafil 5 mg/mL in a 1:1 mixture of Ora-Plus and Ora-Sweet was stable for at least 91 days when stored in amber plastic bottles at room temperature.

Test of 6-in.-thick pressure vessels. Series 4: intermediate test vessels V-5 and V-9 with inside nozzle corner cracks

International Nuclear Information System (INIS)

Merkle, J.G.; Robinson, G.C.; Holz, P.P.; Smith, J.E.

1977-01-01

Failure testing is described for two 99-cm-diam (39-in.), 15.2-cm-thick (6-in.) steel pressure vessels, each containing one flawed nozzle. Vessel V-5 was tested at 88 0 C (190 0 F) and failed by leaking without fracturing after extensive stable crack growth. Vessel V-9 was tested at 25 0 C (75 0 F) and failed by fracturing. Material properties measured before the tests were used for pretest and posttest fracture analyses. Test results supported by analysis indicate that inside nozzle corner cracks are not subject to plane strain under pressure loading. The preparation of inside nozzle corner cracks is described in detail. Extensive experimental data are tabulated and plotted

Preparation and determination of desethylamiodarone in dog lung by HPLC-MS.

Science.gov (United States)

Hong, Liu Xue; Ying, Yang Chuan; Lei, Zheng; Chen, Guo Rui

2011-11-01

A novel method was developed for the preparation and determination of desethylamiodarone in dog lung by high-performance liquid chromatography (HPLC) with amiodarone as a standard. The selected dog was orally given amiodarone, then executed and the active metabolite desethylamiodirone in lung tissue was isolated, concentrated and purified by Waters C18 column (25 mm x 250 mm, 10 microm) with mobile phase of acetonitrile-100 mmol/L acetic acid containing 15 mmol/L diethylamine (55:45 v/v) at a flow rate of 10.0 mL/min. Hypersil ODS2 column (4.6 mm x 250 mm 5 microm) was used to analyze amiodarone and desethylamiodarone, with the same mobile phase at a flow rate of 1.0 mL/min, the detection wavelength was 237.5 nm. Atmosperic pressure electronic spray ionization (AP-ESI) and ion mass spectral (m/z) of 618.1(M + H) were selected to validate desethylamiodarone. The f(i) of desethylamiodarone and amiodarone were 1.04 +/- 0.02 and 1.020 +/- 0.01, respectively. It indicated that desethylamiodarone can be separated and purified by preparational HPLC after Mass Spectrometry (MS) validation and quantified according to f(i) of amiodarone indirectly. The proposed method enables the preparation and determination of desethylamiodarone in dog lung successfully.

Oral hygiene risk indicators among 6- to 9-year-old Taiwanese aboriginal children.

Science.gov (United States)

Hsieh, Hui-Ju; Huang, Shun-Te; Tsai, Chi-Cheng; Chiou, Meng-Jao; Liao, Cheng-Ta

2014-05-01

This study investigated the dental health status, dietary habits, oral hygiene levels, and caretaker risk indicators among Taiwanese children. This cross-sectional purposive sampling study included 256 aboriginal children, 6 to 9 years old, living in remote regions in southern Taiwan. Participants received dental examinations, and questionnaires were completed by caretakers. Data were analyzed using the χ(2) test, t test, and multiple logistic regressions. The deft (sum of decayed, extracted, and filled primary teeth) and defs (sum of the decayed, extracted, and filled primary dentition surfaces) indices were affected by the frequencies of drinking sweetened beverages (P = .0006) and daily toothbrushing (P = .0032). Caretakers' toothbrushing frequency was a significant predictor of children's oral hygiene status (P oral hygiene was 2.04 (P = .0184). Oral hygiene among aboriginal children in this study was inadequate. Caretakers' toothbrushing frequency and betel quid habit were significant predictors of poor children's oral hygiene. © 2012 APJPH.

Evaluation of resting brain conditions measured by two different methods (i.v. and oral administration) with 18F-FDG-PET

International Nuclear Information System (INIS)

Masud, M.; Yamaguchi, Keiichiro; Rikimaru, Hisashi; Tashiro, Manabu; Ozaki, Kaoru; Watanuki, Shoichi; Miyake, Masayasu; Ido, Tatsuo; Itoh, Masatoshi

2001-01-01

Our aim was to evaluate regional differences between brain activity in two resting control conditions measured by 3D PET after administration of FDG through either the intravenous (i.v.) or the oral route. Ten healthy male volunteers engaged in the study as the i.v. group (mean age, 26±9.3 years, ±S.D.) who received FDG intravenously and another 10 volunteers as the oral group (mean age, 27.9±11.3 years, ±S.D.) who received FDG per os. A set of 3D-PET scans (emission and transmission scans) were performed in both groups. To explore possible functional differences between the brains of the two groups, the SPM-96 software was used for statistical analysis. The results revealed that glucose metabolism was significantly higher in the superior frontal gyrus, superior parietal lobule, lingual gyrus and left cerebellar hemisphere in the i.v. group than in the oral group. Metabolically active areas were found in the superior, middle and inferior temporal gyrus, parahippocampal gyrus, amygdaloid nucleus, pons and cerebellum in the oral group when compared with the i.v. group. These differences were presumably induced by differences between FDG kinetics and/or time-weighted behavioral effects in the two studies. This study suggests the need for extreme caution when selecting a pooled control population for designated activation studies. (author)

[Oral hygiene customs in 6-12 year old schoolchildren].

Science.gov (United States)

Hernández-Martínez, César Tadeo; Medina-Solís, Carlo Eduardo; Robles-Bermeo, Norma Leticia; Mendoza-Rodríguez, Martha; Veras-Hernández, Miriam; De la Rosa-Santillana, Rubén; Escoffié-Ramírez, Mauricio; Márquez-Rodríguez, Sonia

2014-01-01

OBJECTIVE. To characterize utilization of oral hygiene devices and customs in schoolchildren. MATERIAL AND METHODS. We performed a cross-sectional study in 1,404 schoolchildren (6- 12 year olds) from 14 public schools in Pachuca, Hidalgo, México, using a questionnaire for sociodemographic variables and 1) Tooth brushing frequency (customs were 85.5% tooth brushing, 90.9% toothpaste, 19.4% flossing, and 28.2% mouthwash. Only 11.8% of participants reported utilization in all 4 categories. We observed differences (p < 0.05) across sexes only in the use of toothpaste, as women used it more often. Differences across age were observed (p < 0.05) for tooth brushing (younger children brushed more often) and flossing (older children flossed more often). CONCLUSIONS. Tooth brushing was the oral hygiene practice more often performed in this sample, with other frequencies being relatively low. There were differences by age and sex across some variables.

Dissolution and oral bioavailability enhancement of praziquantel by solid dispersions.

Science.gov (United States)

Liu, Yanyan; Wang, Tianzi; Ding, Wenya; Dong, Chunliu; Wang, Xiaoting; Chen, Jianqing; Li, Yanhua

2018-06-01

The aim of the present investigation was to enhance the solubility, dissolution, and oral bioavailability of praziquantel (PZQ), a poorly water-soluble BCS II drug (Biopharmaceutical Classification System), using a solid dispersion (SD) technique involving hydrophilic copolymers. The SD formulations were prepared by a solvent evaporation method with PZQ and PEG 4000 (polyethylene glycol 4000), PEG 6000, or P 188 polymers at various weight ratios or a combination of PEG 4000/P 188. The optimized SD formulation, which had the highest solubility in distilled water, was further characterized by its surface morphology, crystallinity, and dissolution in 0.1 M HCl with 0.2% w/v of sodium dodecyl sulfate (SDS). X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) revealed the amorphous form of PZQ in the SDs. Moreover, at an oral dosage of 5 mg/kg PZQ, the SDs had higher C max values and areas under the curve (AUCs) compared to those of commercial PZQ tablets. Preparation of PZQ-loaded SDs using PEG 4000/P 188 is a promising strategy to improve the oral bioavailability of PZQ.

Our experience using primary oral antibiotics in the management of orbital cellulitis in a tertiary referral centre.

Science.gov (United States)

Cannon, P S; Mc Keag, D; Radford, R; Ataullah, S; Leatherbarrow, B

2009-03-01

Orbital cellulitis is conventionally managed by intravenous (i.v.) antibiotic therapy, followed by oral antibiotics once the infection shows signs of significant improvement. We report 4 years of experience using primary oral ciprofloxacin and clindamycin in cases of orbital cellulitis. Oral ciprofloxacin and clindamycin have a similar bioavailability to the i.v. preparations and provide an appropriate spectrum of antibiotic cover for the pathogens responsible for orbital cellulitis. A retrospective review was performed that identified all patients with orbital cellulitis and treated with primary oral antibiotic therapy admitted to the Manchester Royal Eye Hospital between March 2003 and March 2007. Age, stage of disease, surgical intervention, hospital duration, and complications were obtained. A comparison was made with patients admitted to our unit with orbital cellulitis and treated with primary i.v. antibiotics between March 2000 and March 2003. Nineteen patients were included in the review for the period March 2003 to March 2007, which comprised of 7 children and 12 adults. Five patients required surgical intervention. All patients responded to the oral regimen, 18 patients had no change to their oral antibiotic therapy. Mean hospital stay was 4.4 days. There were no complications. Empirical oral ciprofloxacin and clindamycin combination may be as safe and effective as i.v. therapy in the management of orbital cellulitis. Oral treatment can offer the advantages of rapid delivery of the first antibiotic dose, fewer interruptions in treatment, and simplified delivery of medication particularly in children.

Asthma-associated oral and dental health repercussions in children aged 6 to 12 years

Directory of Open Access Journals (Sweden)

Juana Angélica Ramos-Ríos

2017-10-01

Full Text Available Background: Asthma, which is characterized by mouth breathing and by the use of drugs for its treatment, affects between 1 and 30% of children and adolescents. There are only few studies reporting its impact on the oral cavity. Objectives: To find out the most common asthma-associated repercussions in 6 to 12-year-old children. Methods: Cross-sectional, comparative, analytical study carried out in 2 primary schools from Coclique, Veracruz, Mexico, in 6 to 12-year-old children. The International Study of Asthma and Allergies in Childhood (ISAAC questionnaire for parents was used. Results: In a population of 409 children, a prevalence of asthma of 6.84% (n = 28 was found, which was higher in males (15, 54%; boys aged 6, 7 and 11 years and girls aged 8, 9 and 10 years were most affected. Risk factors for oral manifestations were acidic pH (OR = 170, caries (OR = 4.29, anterior open bite (OR = 66.78, gingivitis (OR = 9.75, atypical swallowing (OR = 15.70 and high-arched palate (OR = 45.60. Conclusion: Children with chronic conditions such as asthma require an oral and dental preventive program as part of their interdisciplinary care.

Preparation and characterization of amorphous amphotericin B nanoparticles for oral administration through liquid antisolvent precipitation.

Science.gov (United States)

Zu, Yuangang; Sun, Wei; Zhao, Xiuhua; Wang, Weiguo; Li, Yong; Ge, Yunlong; Liu, Ying; Wang, Kunlun

2014-03-12

We prepared amphotericin B (AmB) nanoparticles through liquid antisolvent precipitation (LAP) and by freeze-drying to improve the solubility of AmB for oral administration. The LAP was optimized through a single-factor experiment. We determined the effects of surfactants and their concentration, the stirring time, the precipitation temperature, the stirring intensity, the drug concentration and the volume ratio of antisolvent to solvent on the mean particle size (MPS) of the AmB nanoparticles. Increased stirring intensity and precipitation time favored AmB nanoparticles with smaller MPS, but precipitation times exceeding 30 min did not further reduce the MPS. Increased Tween-80 concentration and the drug concentration decreased the MPS of the AmB nanoparticles. Increased precipitation temperature and antisolvent to solvent volume ratio initially decreased the MPS of the AmB nanoparticles, which increased thereafter. Optimum conditions produced AmB nanoparticles with an MPS of 135.1 nm. The AmB nanoparticles were characterized through scanning electron microscopy (SEM), mass spectrometry (MS), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermal gravimetric analysis (TG), solvent residue, drug purity test, and dissolution testing. The analyses indicated that the chemical structure of AmB remained unchanged in the nanoparticles, but the structure was changed from crystalline to amorphous. The residual DMSO in the nanoparticles was 0.24% less than the standard set by the International Conference on Harmonization limit for class III solvents. The AmB nanoparticles exhibited 2.1 times faster dissolution rates and 13 times equilibrium solubility compared with the raw drug. The detection results indicate that the AmB nanoparticles potentially improved the oral absorption of AmB. Copyright © 2013 Elsevier B.V. All rights reserved.

[A clinical case of young, oral combined contraceptive using women, heterozygous carrier of the Factor V (Leiden) which revealed thrombosis of the left internal jugular vein and brain ischemia with cerebral infarction and ischemic stroke].

Science.gov (United States)

Kovachev, S; Ramshev, K; Ramsheva, Z; Ivanov, A; Ganovska, A

2013-01-01

Thrombophilia is associated with increased risks of venous thrombosis in women taking oral contraceptive preparations. Universal thrombophilia screening in women prior to prescribing oral contraceptive preparations is not supported by current evidence. The case is presented of a 23 year-old women with a personal history of interruption and on the same day started with oral contraceptive (0.03 microg ethynil estradiol - 0.075 microg gestodene), which due on a 18 pill/day to acute headache, increasing vomiting and speaking defects. Physical/neurologic/gynecologic examinations observed a normal status. The MRI and CT revealed thrombosis of the left internal jugular vein and brain ischemia with cerebral infarction and ischemic stroke. The acute therapy of thrombotic findings was accompanied with many tests. The thrombophilia PCR-Real time - test finds heterozygous carrier of the Factor V (Leiden). This case shows the need of large prospective studies that should be undertaken to refine the risks and establish the associations of thrombophilias with venous thrombosis among contraceptive users. The key to a prompt diagnosis is to know the risk factors. The relative value of a thrombophilia screening programme before contraceptive using needs to be established.

Thermoluminescence response of Ge-, Al- and Nd- doped optical fibers by 6 MeV - electron and 6 MeV - photon irradiations

International Nuclear Information System (INIS)

Hossain, I.; Moburak, A. A.; Saeed, M.A.; Wagiran, H.; Hida, N.; Yaakob, H.N.

2015-01-01

In this paper, we report the prediction of thermoluminescence responses of Neodymium-doped SiO 2 optical fibre with various dose ranges from 0.5 Gy to 4.0 Gy by 6 MeV - electron irradiations without requirement for experimental measurements. A technique has been developed to calculate prediction of 6 MeV - electron response of Neodymium-doped SiO 2 optical fibre by observing the measured TL response of 6 MV - photon and the ratio of known measured photon/electron yield ratio distribution for Ge-doped, Al-doped optical fibre and standard TLD 100 dosimeter. The samples were kept in gelatin capsule an irradiated with 6 MV - photon at the dose range from 0.5 Gy to 4.0 Gy. Siemens model Primus 3368 linear accelerator located at Hospital Sultan Ismail, Johor Bahru has been used to deliver the photon beam to the samples. We found the average response ratio of 6 MV - photon and 6 MeV - electron in Ge-doped, Al-doped optical fibre and standard TLD-100 dosimeter are 0.83(3). Observing the measured value of 6 MV - photon irradiation this average ratio is useful to find the prediction of thermoluminescence responses by 6 MeV - electron irradiation of Neodymium-doped SiO 2 optical fibre by the requirement for experimental measurements with various dose ranges from 0.5 Gy to 4.0 Gy by 6 MV - photon irradiations.

Characterisation of oral and i.v. glucose handling in truncally vagotomised subjects with pyloroplasty

DEFF Research Database (Denmark)

Plamboeck, Astrid; Veedfald, Simon; Deacon, Carolyn F

2013-01-01

=16) and matched controls (n=10) underwent 50 g-oral glucose tolerance test (OGTT)±vildagliptin, a DPP4 inhibitor (DPP4i) and isoglycaemic i.v. glucose infusion (IIGI), copying the OGTT without DPP4i. RESULTS: Isoglycaemia was obtained with 25±2 g glucose in vagotomised subjects and 18±2 g in controls...

High-resolution infrared spectroscopy of the interacting v₉, v₅ + v₆ and 3v₆ levels of CH₂⁷⁹BrF

DEFF Research Database (Denmark)

Visinoni, R.; Baldacci, A.; Larsen, R. Wugt

2011-01-01

order a- and b- and c-type Coriolis terms. A detailed analysis of the rotational structure yields a set of accurate upper-state parameters up to quartic distortion terms for v(9) and v(5) + v(6). In addition, spectroscopic information about the dark ternary overtone of v(6) has been obtained. (C) 2011...

Improved oral bioavailability of probucol by dry media-milling.

Science.gov (United States)

Li, Jia; Yang, Yan; Zhao, Meihui; Xu, Hui; Ma, Junyuan; Wang, Shaoning

2017-09-01

The polymer/probucol co-milled mixtures were prepared to improve drug dissolution rate and oral bioavailability. Probucol, a BCS II drug, was co-milled together with Copovidone (Kollidon VA64, VA64), Soluplus, or MCC using the dry media-milling process with planetary ball-milling equipment. The properties of the milled mixtures including morphology, crystal form, vitro drug dissolution and in vivo oral bioavailability in rats were evaluated. Probucol existed as an amorphous in the matrix of the co-milled mixtures containing VA64, which helped to enhance drug dissolution. The ternary mixture composed of VA64, RH40, and probucol showed increased dissolution rates in both sink and non-sink conditions. It also had a higher oral bioavailability compared to the reference formulation. Dry-media milling of binary or ternary mixtures composed of drug, polymer and surfactant possibly have wide applications to improve dissolution rate and oral bioavailability of water-insoluble drugs. Copyright © 2017 Elsevier B.V. All rights reserved.

Preparing the Next Generation of Oral Historians: An Anthology of Oral History Education

Science.gov (United States)

Lanman, Barry A., Ed.; Wendling, Laura M., Ed.

2006-01-01

This book is an invaluable resource to educators seeking to bring history alive for students at all levels. The anthology opens with chapters on the fundamentals of oral history and its place in the classroom, but its heart lies in nearly two dozen insightful personal essays by educators who have successfully incorporated oral history into their…

Friction and wear study of diamond-like carbon gradient coatings on Ti6Al4V substrate prepared by plasma source ion implant-ion beam enhanced deposition

International Nuclear Information System (INIS)

Jiang, Shuwen; Jiang Bin; Li Yan; Li Yanrong; Yin Guangfu; Zheng Changqiong

2004-01-01

DLC gradient coatings had been deposited on Ti6Al4V alloy substrate by plasma source ion implantation-ion beam enhanced deposition method and their friction and wear behavior sliding against ultra high molecular weight polyethylene counterpart were investigated. The results showed that DLC gradient coated Ti6Al4V had low friction coefficient, which reduced 24, 14 and 10% compared with non-coated Ti6Al4V alloy under dry sliding, lubrication of bovine serum and 0.9% NaCl solution, respectively. DLC gradient coated Ti6Al4V showed significantly improved wear resistance, the wear rate was about half of non-coated Ti6Al4V alloy. The wear of ultra high molecular weight polyethylene counterpart was also reduced. High adhesion to Ti6Al4V substrate of DLC gradient coatings and surface structure played important roles in improved tribological performance, serious oxidative wear was eliminated when DLC gradient coating was applied to the Ti6Al4V alloy

Synthesis of a TiBw/Ti6Al4V composite by powder compact extrusion using a blended powder mixture

Energy Technology Data Exchange (ETDEWEB)

Lu, Huiyang, E-mail: hl209@waikato.ac.nz [Waikato Center for Advanced Materials, School of Engineering, University of Waikato, Hamilton (New Zealand); Zhang, Deliang, E-mail: zhangdeliang@sjtu.edu.cn [State Key Laboratory of Metal Matrix Composites, School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai (China); Gabbitas, Brian, E-mail: briang@waikato.ac.nz [Waikato Center for Advanced Materials, School of Engineering, University of Waikato, Hamilton (New Zealand); Yang, Fei, E-mail: fyang@waikato.ac.nz [Waikato Center for Advanced Materials, School of Engineering, University of Waikato, Hamilton (New Zealand); Matthews, Steven, E-mail: S.Matthews@massey.ac.nz [School of Engineering and Advanced Technology, Massey University, Auckland (New Zealand)

2014-09-01

Highlights: • TiB/Ti6Al4V composites were prepared from extruded BE powders. • Different starting powders affected the morphologies of TiB whiskers formed in-situ. • A TiB/Ti6Al4V composite with TiB whiskers had good strength and ductility. • The strength and ductility achieved were superior to those obtained by other methods. - Abstract: A Ti–6 wt%Al–4 wt%V alloy (Ti6Al4V) matrix composite, reinforced by in situ synthesized TiB whiskers (TiBw) has been successfully fabricated by powder compact extrusion using a blended powder mixture. The microstructural characterization of the various extruded samples showed that the different starting powders, pre-alloyed powder plus boron powder or titanium plus Al–40V master alloy powder plus boron powder, had a significant effect on the morphology of the in situ synthesized TiB whiskers. It is also evident that the TiB whiskers affect the microstructural evolution of the Ti6Al4V matrix. The tensile test results indicated that the composite with a dispersion of fine TiB whiskers with high aspect ratios exhibited a high ultimate tensile stress (UTS) and yield stress (YS) of 1436 MPa and 1361 MPa, respectively, a reasonably good tensile ductility reflected by an elongation to fracture of 5.6% was also achieved. This is a significant improvement compared with as-extruded monolithic Ti6Al4V alloy produced in this study.

Synthesis of a TiBw/Ti6Al4V composite by powder compact extrusion using a blended powder mixture

International Nuclear Information System (INIS)

Lu, Huiyang; Zhang, Deliang; Gabbitas, Brian; Yang, Fei; Matthews, Steven

2014-01-01

Highlights: • TiB/Ti6Al4V composites were prepared from extruded BE powders. • Different starting powders affected the morphologies of TiB whiskers formed in-situ. • A TiB/Ti6Al4V composite with TiB whiskers had good strength and ductility. • The strength and ductility achieved were superior to those obtained by other methods. - Abstract: A Ti–6 wt%Al–4 wt%V alloy (Ti6Al4V) matrix composite, reinforced by in situ synthesized TiB whiskers (TiBw) has been successfully fabricated by powder compact extrusion using a blended powder mixture. The microstructural characterization of the various extruded samples showed that the different starting powders, pre-alloyed powder plus boron powder or titanium plus Al–40V master alloy powder plus boron powder, had a significant effect on the morphology of the in situ synthesized TiB whiskers. It is also evident that the TiB whiskers affect the microstructural evolution of the Ti6Al4V matrix. The tensile test results indicated that the composite with a dispersion of fine TiB whiskers with high aspect ratios exhibited a high ultimate tensile stress (UTS) and yield stress (YS) of 1436 MPa and 1361 MPa, respectively, a reasonably good tensile ductility reflected by an elongation to fracture of 5.6% was also achieved. This is a significant improvement compared with as-extruded monolithic Ti6Al4V alloy produced in this study

Evaluation of resting brain conditions measured by two different methods (i.v. and oral administration) with {sup 18}F-FDG-PET

Energy Technology Data Exchange (ETDEWEB)

Masud, M.; Yamaguchi, Keiichiro; Rikimaru, Hisashi; Tashiro, Manabu; Ozaki, Kaoru; Watanuki, Shoichi; Miyake, Masayasu; Ido, Tatsuo; Itoh, Masatoshi [Tohoku Univ., Sendai (Japan). Cyclotron and Radioisotope Center

2001-02-01

Our aim was to evaluate regional differences between brain activity in two resting control conditions measured by 3D PET after administration of FDG through either the intravenous (i.v.) or the oral route. Ten healthy male volunteers engaged in the study as the i.v. group (mean age, 26{+-}9.3 years, {+-}S.D.) who received FDG intravenously and another 10 volunteers as the oral group (mean age, 27.9{+-}11.3 years, {+-}S.D.) who received FDG per os. A set of 3D-PET scans (emission and transmission scans) were performed in both groups. To explore possible functional differences between the brains of the two groups, the SPM-96 software was used for statistical analysis. The results revealed that glucose metabolism was significantly higher in the superior frontal gyrus, superior parietal lobule, lingual gyrus and left cerebellar hemisphere in the i.v. group than in the oral group. Metabolically active areas were found in the superior, middle and inferior temporal gyrus, parahippocampal gyrus, amygdaloid nucleus, pons and cerebellum in the oral group when compared with the i.v. group. These differences were presumably induced by differences between FDG kinetics and/or time-weighted behavioral effects in the two studies. This study suggests the need for extreme caution when selecting a pooled control population for designated activation studies. (author)

Preparation and characterization of multi-walled carbon nanotube/hydroxyapatite nanocomposite film dip coated on Ti-6Al-4V by sol-gel method for biomedical applications: an in vitro study.

Science.gov (United States)

Abrishamchian, Alireza; Hooshmand, Tabassom; Mohammadi, Mohammadreza; Najafi, Farhood

2013-05-01

In the present research, the introduction of multi-walled carbon nanotubes (MWCNTs) into the hydroxyapatite (HA) matrix and dip coating of nanocomposite on titanium alloy (Ti-6Al-4V) plate was conducted in order to improve the performance of the HA-coated implant via the sol-gel method. The structural characterization and electron microscopy results confirmed well crystallized HA-MWCNT coating and homogenous dispersion of carbon nanotubes in the ceramic matrix at temperatures as low as 500 °C. The evaluation of the mechanical properties of HA and HA/MWCNT composite coatings with different weight percentages of MWCNTs showed that the addition of low concentrations of MWCNTs (0.5 and 1 wt.%) had improved effect on the mechanical properties of nanocomposite coatings. Moreover, this in vitro study ascertained the biocompatibility of the prepared sol-gel-derived HA/MWCNT composite coatings. Copyright © 2013 Elsevier B.V. All rights reserved.

Evaluation of oral and dental health of 6-12 year-old students in Kermanshah city

Directory of Open Access Journals (Sweden)

Mohammad Reza Nokhostin

2013-09-01

Full Text Available Background: Oral and dental health are among the most important aspects of individual health. Thus, it is necessary to determine community’s oral health status. Various epidemiological studies are required at different levels to assess the efficacy of preventive, oral and dental health control programs in a society. Complications such as nutritional adverse effects, periodontal diseases and adverse psychological effects of dental caries and etc. could be prevented by in-time diagnosis and treatment. This study aimed to assess DMF, dmf index and periodontal status in 6-12 year-old students in Kermanshah City in 2009. Material and Methods: This was a descriptive cross-sectional study. Data were collected through interview and dental clinical examination using disposable dental explorer, dental mirror, periodontal probe, a flash light and a marker. Data were entered into a questionnaire containing demographic characteristics and oral and dental health status of subjects (WHO oral health assessments form. A total of 1050 students aged 6 to 12 years were evaluated for their oral health status in Kermanshah City. Data were analyzed using SPSS version 14 software. T-test and chi square test were also used for analysis. Results: A total of 50% of boys and 52% of girls were susceptible to dent facial problems due to caries, extraction, premature loss of deciduous teeth, and congenital or acquired maxillofacial problems following conditions like mouth breathing due to adenoid and etc. Overall, 18.3% of 6 year old students were caries free. Among middle school students, DMFT was 1.65±1.82 and 3.88±2.72 among female and male 12 year old students, respectively. In general, 19.8% of elementary and 16.8% of 12 year old students had clinically healthy gingiva 21.6% of 6 to 12 year old students did not brush their teeth. A significant correlation was found between the frequency of tooth brushing per day and mean dmft, mean DMFT and gingival health (P<0

Lecithin-based microemulsion of a peptide for oral administration: preparation, characterization, and physical stability of the formulation.

Science.gov (United States)

Cilek, Ayşe; Celebi, Nevin; Tirnaksiz, Figen

2006-01-01

The objective of our study was to prepare and characterize a stable microemulsion formulation for oral administration of a peptide, e.g., rh-insulin. The microemulsions were prepared using Labrafil M 1944 CS, Phospholipon 90G (lecithin), absolute alcohol, and bidistilled water. Commercially available soybean lecithins (namely, Phospholipon 80, phosphatidylcholine purity 76 +/- 3%, and Phospholipon 90G, phosphatidylcholine purity 93 +/- 3%) were used in the study. The results showed that the phase diagram obtained using a low purity lecithin was not similar to that obtained with a high purity lecithin. We observed that the microemulsion area was wider at the phase diagram obtained with the higher purity lecithin. We found that the extent of the microemulsion region depended upon both the purity of the lecithin and the surfactant/co-surfactant (s/co-s) mixing ratios (K(m)). The rheological studies showed that microemulsions followed a Newtonian behavior. Such physical characteristics as viscosity, turbidity, density, conductivity, refractive index, droplet size, physical appearance, and phase separation of the microemulsion were measured at different temperatures (4 degrees C, 25 degrees C, and 40 degrees C) during 6 months. The results indicated that the physical characteristics of the developed microemulsions did not change under different storage temperatures (p > 0.05).

The Preparation of an Electron Beam Machine 500 keV/10 mA Instrumentation

International Nuclear Information System (INIS)

Sudiyanto; Prayitno; Dewita; Bambang-Supardiyono; Widi-Setyawan

2000-01-01

The preparation of an Electron Beam Machine 500 keV/10 mA instrumentation by using a Distributed Instrumentation System have been done. The system consisting of industrial interfaces PCL-718 ADC 12 bit, PCLD-889 Mux/Prog Gain Amp PCLD-786 Driver Relay with solid state relays, PCL 745 serial com, DC motor 12-24 V/8.6 A with reduction gear 10:1 and a pair of PC's connected with twisted cable and an isolated amplifier AD-210 equipped with high voltage divider. The operation can be done using animation Pascal program on the remote mode using twisted cable and a pair of RS-485 interfaces, some operation sequences such as switch on/off blower unit, water pump cooling unit, filament voltage, anode voltage and some timer's have already been adapted on the computer program. Non intercepting beam monitoring technique have been discussed in this paper. (author)

Preparation and biological study of 99Tcm(N) (PNP6) (Cyc-RGD) for integrin αvβ3-positive tumor imaging

International Nuclear Information System (INIS)

Chen Baojun; Hu Ji; Liang Jixin; Li Hongyu; Luo Lianzhe; Shen Langtao; Luo Zhifu; Chen Yang

2007-01-01

The Cys-RGD peptide is labelled with 99 Tc m -nitrido core combined with PNP6 lig- and (PNP6=bis (diethoxypropylphosphino ethyl) ethoxy ethylamine) to investigate the possibility of radiolabelled RGD peptides for tumor α v β 3 integrin receptor scintigraphy. The radiochemical purity is measured with HPLC, the in vitro stability is investigated at room temperature and at 37 degree C incubated in the cystein and serum solution. Biodistribution studies and gamma camera imaging are performed in normal mice and nude mice bearing FWK-1 pancreatic tumor xenografts. More than 92% radiolabelling yield is achieved under optimized condition. The high in vitro stability is found for 99 Tc m (N) (PNP6) (Cys-RGD). In vivo biodistribution studies indicate the radiolabelled peptide is cleared rapidly from blood and mainly excreted via urinary system. Tumor uptake is 2.92 ± 0.71%/g at 1 h after injection. The uptake ratios of tumor to blood and tumor to muscle (T/NT) are 11.0 and 3. 1 at 4 h after injection, respectively. Scintigraphic imaging allows contrasting visualisation of α v β 3 -expressed tumors at 1 h after injection. The results suggest 99 Tc m (N) (PNP6) (Cys- RGD) may be the potential agent for α v β 3 -positive tumor imaging. (authors)

ANC of 6.92 MeV (2"+) and 7.12 MeV (1"-) states from sub-Coulomb "1"2C("6Li,d) data

International Nuclear Information System (INIS)

Mondal, Ashok; Basu, C.; Adhikari, S.

2016-01-01

The determination of the astrophysical S-factor of the "1"2C(α,γ) reaction at 300 keV requires a R-matrix extrapolation. This is because a direct measurement of this reaction at 300 keV is almost impossible due to the very small cross-section. The R-matrix extrapolation requires as input the asymptotic normalization constant (ANC) of mainly two "1"6O states states viz. 6.92 MeV and 7.12 MeV on which the fit is most sensitive. The ANC of these two states have been determined from indirect measurements, mainly from "1"2C("6Li,d) and "1"2C("7Li,t) alpha transfer reactions. Most of these measurements are done at above barrier energies as cross-sections are larger. In this work, we determine the ANC of the 6.92 MeV and 7.12 MeV states of "1"6O using the "1"2C("6Li,d) data of Heikkinen et al measured at 4.5 to 5.0 MeV incident energies. The data spans over a larger angular span in comparison to Avila though the former data do not cover the very backward angles as in the Avila data. As the Heikkinen data has never been analyzed to extract the ANC we report the results of our analysis of the data

Synthesis of [64Cu]DOTA-ADIBON3-Ala-PEG28-A20FMDV2 via copper-free click chemistry for PET imaging of integrin αvβ6

International Nuclear Information System (INIS)

Drishty Satpati; Nadine Bauer; Hausner, S.H.

2014-01-01

Catalyst-free click reactions are effective chemical tools for synthesis of radiometal-based radiopharmaceuticals offering advantages towards preparation of non-toxic agents with high specific activity. In the present study the radiotracer [ 64 Cu]DOTA-ADIBON 3 -Ala-PEG 28 -A20FMDV2, [ 64 Cu]3, was synthesized for positron emission tomography imaging of integrin α v β 6 expressing tumors via a strain-promoted click reaction using both a 'pre-click' and 'post-click' approaches. The radiotracer, prepared in >99 % radiochemical yield, was evaluated in vitro (64.6 ± 2.8 % binding to α v β 6 -positive cells vs. v β 6 -negative cells) and in vivo (α v β 6 -positive tumor uptake: 1.52 ± 0.16 % ID/g, 24 h p.i.). While the high initial renal uptake (76.2 ± 10.7 % ID/g at 1 h p.i.) was comparable to a previously reported radiotracer, [ 64 Cu]DOTA-PEG 28 -A20FMDV2, [ 64 Cu]3 showed notably improved renal clearance (11.3 ± 2.5 % ID/g at 24 h p.i.). Thus, the introduction of a chelator-strained alkyne system resulted in improved pharmacokinetics for the present radiotracer, highlighting the attractive prospects of strain-promoted click-based preparations in the construction of radiometalated bioconjugates for targeted molecular imaging and therapy. (author)

Preparation of well-distributed titania nanopillar arrays on Ti6Al4V surface by induction heating for enhancing osteogenic differentiation of stem cells

Science.gov (United States)

Li, Ning-Bo; Sun, Sheng-Jun; Bai, Han-Ying; Xiao, Gui-Yong; Xu, Wen-Hua; Zhao, Jun-Han; Chen, Xin; Lu, Yu-Peng; Zhang, Yi-Lin

2018-01-01

Great effort has recently been devoted to the preparation of nanoscale surfaces on titanium-based implants to achieve clinically fast osteoinduction and osseointegration, which relies on the unique characteristics of the nanostructure. In this work, we used induction heating treatment (IHT) as a rapid oxidation method to fabricate a porous nanoscale oxide layer on the Ti6Al4V surface for better medical application. Well-distributed vertical nanopillars were yielded by IHT for 20-35 s on the alloy surface. The composition of the oxides contained rutile/anatase TiO2 and a small amount of Al2O3 between the TiO2 grain boundaries (GBs). This technology resulted in a reduction and subsequent increase of surface roughness of 26-32 nm when upregulating the heating time, followed by the successive enhancement of the thickness, wettability and adhesion strength of the oxidation layer to the matrix. The surface hardness also distinctly rose to 554 HV in the IHT-35 s group compared with the 350 HV of bare Ti6Al4V. The massive small-angle GBs in the bare alloy promoted the formation of nanosized oxide crystallites. The grain refinement and deformation texture reduction further improved the mechanical properties of the matrix after IHT. Moreover, in vitro experiments on a mesenchymal stem cell (BMSC) culture derived from human bone marrow for 1-7 days indicated that the nanoscale layers did not cause cytotoxicity, and facilitated cell differentiation in osteoblasts by enhancing the gene and osteogenesis-related protein expressions after 1-3 weeks of culturing. The increase of the IHT time slightly advanced the BMSC proliferation and differentiation, especially during long-term culture. Our findings provide strong evidence that IHT oxidation technology is a novel nanosurface modification technology, which is potentially promising for further clinical development.

Ammonia sensing properties of V-doped ZnO:Ca nanopowders prepared by sol–gel synthesis

International Nuclear Information System (INIS)

Fazio, E.; Hjiri, M.; Dhahri, R.; El Mir, L.; Sabatino, G.; Barreca, F.; Neri, F.; Leonardi, S.G.; Pistone, A.; Neri, G.

2015-01-01

V-doped ZnO:Ca nanopowders with different V loading were prepared by sol–gel synthesis and successive drying in ethanol under supercritical conditions. Characterization data of nanopowders annealed at 700 °C in air, revealed that they have the wurtzite structure. Raman features of V-doped ZnO:Ca samples were found to be substantially modified with respect to pure ZnO or binary ZnO:Ca samples, which indicate the substitution of vanadium ions in the ZnO lattice. The ammonia sensing properties of V-doped ZnO:Ca thick films were also investigated. The results obtained demonstrate the possibility of a fine tuning of the sensing characteristics of ZnO-based sensors by Ca and V doping. In particular, their combined effect has brought to an enhanced response towards NH 3 compared to bare ZnO and binary V-ZnO and Ca-ZnO samples. Raman investigation suggested that the presence of Ca play a key role in enhancing the sensor response in these ternary composite nanomaterials. - Graphical abstract: V-doped ZnO:Ca nanopowders prepared by sol–gel synthesis possess enhanced sensing characteristics towards NH 3 compared to bare ZnO. - Highlights: • V-doped ZnO:Ca nanopowders with different V loading were prepared by sol–gel synthesis. • Raman features of V-doped ZnO:Ca samples indicate the substitution of V ions in the ZnO lattice. • Combined effects of dopants have brought to an enhanced response to NH 3 compared to ZnO. • Ca play a key role in enhancing the sensor response of ternary V-doped ZnO:Ca composites

Density of liquid Ti-6Al-4V

Directory of Open Access Journals (Sweden)

Schmon Alexander

2017-01-01

Full Text Available Ti-6Al-4V is due to its high strength-density ratio a commonly used alloy in aerospace industry applications. But liquid phase data are scarce as preventing contaminations of the reactive high temperature melt during the investigation process poses a challenge. The thermophysical quantity density is of special interest since it is necessary input parameter in modern numerical casting and solidification simulations. Liquid phase density of Ti-6Al-4V as function of temperature was determined employing a fast resistive pulse-heating technique based on the approach to avoid contaminations of the specimen by extremely reducing the experimental duration of the investigation process. Temperature dependent density of liquid Ti-6Al-4V was determined in a temperature range between 2050 K and 2590 K and is presented.

Oral and transdermal DL-methylphenidate-ethanol interactions in C57BL/6J mice: potentiation of locomotor activity with oral delivery.

Science.gov (United States)

Bell, Guinevere H; Griffin, William C; Patrick, Kennerly S

2011-12-01

Many abusers of dl-methylphenidate co-abuse ethanol. The present animal study examined behavioral effects of oral or transdermal DL-methylphenidate in combination with a high, depressive dose of ethanol to model co-abuse. Locomotor activity of C57BL/6J mice was recorded for 3 h following dosing with either oral DL-methylphenidate (7.5 mg/kg) or transdermal DL-methylphenidate (Daytrana®;1/4 of a 12.5 cm(2) patch; mean dose 7.5 mg/kg), with or without oral ethanol (3 g/kg). Brains were enantiospecifically analyzed for the isomers of methylphenidate and the transesterification metabolite ethylphenidate. An otherwise depressive dose of ethanol significantly potentiated oral DL-methylphenidate induced increases in total distance traveled for the first 100 min (pbrain D-methylphenidate concentrations were significantly elevated by ethanol in both the oral (65% increase) and transdermal (88% increase) groups. The corresponding L-ethylphenidate concentrations were 10 ng/g and 130 ng/g. Stimulant induced motor activity in rodents may correlate with abuse liability. Potentiation of DL-methylphenidate motor effects by concomitant ethanol carries implications regarding increased abuse potential of DL-methylphenidate when combined with ethanol. Copyright © 2011 Elsevier Inc. All rights reserved.

Enhanced oral bioavailability of docetaxel by lecithin nanoparticles: preparation, in vitro, and in vivo evaluation

Science.gov (United States)

Hu, Kaili; Cao, Shan; Hu, Fuqiang; Feng, Jianfang

2012-01-01

The aim of this research work was to investigate the potential of lecithin nanoparticles (LNs) in improving the oral bioavailability of docetaxel. Docetaxel-loaded LNs (DTX-LNs) were prepared from oil-in-water emulsions and characterized in terms of morphology, size, zeta potential, and encapsulation efficiency. The in vitro release of docetaxel from the nanoparticles was studied by using dialysis bag method. Caco-2 cell monolayer was used for the in vitro permeation study of DTX-LNs. Bioavailability studies were conducted in rats and different pharmacokinetic parameters were evaluated after oral administration of DTX-LNs. The results showed that DTX-LNs had a mean diameter of 360 ± 8 nm and exhibited spherical shape with smooth surface under transmission electron microscopy. The DTX-LNs showed a sustained-release profile, with about 80% of docetaxel released within 72 hours. The apical to basolateral transport of docetaxel across the Caco-2 cell monolayer from the DTX-LNs was 2.14 times compared to that of the docetaxel solution (0.15 × 10−5 ± 0.016 × 10−5 cm/second versus 0.07 × 10−5 ± 0.003 × 10−5 cm/second). The oral bioavailability of the DTX-LNs was 3.65 times that of docetaxel solution (8.75% versus 2.40%). These results indicate that DTX-LNs were valuable as an oral drug delivery system to enhance the absorption of docetaxel. PMID:22848177

Oral fast-dissolving drug delivery membranes prepared from electrospun polyvinylpyrrolidone ultrafine fibers

International Nuclear Information System (INIS)

Yu Dengguang; Shen Xiaxia; Zhu Limin; Branford-White, Chris; White, Kenneth; Annie Bligh, S W

2009-01-01

Oral fast-dissolving drug delivery membranes (FDMs) for poorly water-soluble drugs were prepared via electrospinning technology with ibuprofen as the model drug and polyvinylpyrrolidone (PVP) K30 as the filament-forming polymer and drug carrier. Results from differential scanning calorimetry, x-ray diffraction, and morphological observations demonstrated that ibuprofen was distributed in the ultrafine fibers in the form of nanosolid dispersions and the physical status of drug was an amorphous or molecular form, different from that of the pure drug and a physical mixture of PVP and ibuprofen. Fourier-transform infrared spectroscopy results illustrated that the main interactions between PVP and ibuprofen were mediated through hydrogen bonding. Pharmacotechnical tests showed that FDMs with different drug contents had almost the same wetting and disintegrating times, about 15 and 8 s, respectively, but significantly different drug dissolution rates due to the different physical status of the drug and the different drug-release-controlled mechanisms. 84.9% and 58.7% of ibuprofen was released in the first 20 s for FDMs with a drug-to-PVP ratio of 1:4 and 1:2, respectively. Electrospun ultrafine fibers have the potential to be used as solid dispersions to improve the dissolution profiles of poorly water-soluble drugs or as oral fast disintegrating drug delivery systems.

Novel Lipid-Free Nanoformulation for Improving Oral Bioavailability of Coenzyme Q10

Directory of Open Access Journals (Sweden)

Huafeng Zhou

2014-01-01

Full Text Available To improve the bioavailability of orally administered lipophilic coenzyme Q10 (CoQ10, we formulated a novel lipid-free nano-CoQ10 system stabilized by various surfactants. Nano-CoQ10s, composed of 2.5% (w/w CoQ10, 1.67% (w/w surfactant, and 41.67% (w/w glycerol, were prepared by hot high-pressure homogenization. The resulting formulations were characterized by particle size, zeta potential, differential scanning calorimetry, and cryogenic transmission electron microscopy. We found that the mean particle size of all nano-CoQ10s ranged from 66.3±1.5 nm to 92.7±1.5 nm and the zeta potential ranged from -12.8±1.4 mV to -41.6±1.4 mV. The CoQ10 in nano-CoQ10s likely existed in a supercooled state, and nano-CoQ10s stored in a brown sealed bottle were stable for 180 days at 25°C. The bioavailability of CoQ10 was evaluated following oral administration of CoQ10 formulations in Sprague-Dawley rats. Compared to the values observed following administration of CoQ10-Suspension, nano-CoQ10 modified with various surfactants significantly increased the maximum plasma concentration and the area under the plasma concentration-time curve. Thus, the lipid-free system of a nano-CoQ10 stabilized with a surfactant may be an effective vehicle for improving oral bioavailability of CoQ10.

An oral Na(V)1.8 blocker improves motor function in mice completely deficient of myelin protein P-0

DEFF Research Database (Denmark)

Rosberg, Mette R.; Alvarez Herrero, Susana; Krarup, Christian

2016-01-01

Mice deficient of myelin protein P0 are established models of demyelinating Charcot-Marie-Tooth (CMT) disease. Dysmyelination in these mice is associated with an ectopic expression of the sensory neuron specific sodium channel isoform NaV1.8 on motor axons. We reported that in P0+/−, a model of CMT......1B, the membrane dysfunction could be acutely improved by a novel oral NaV1.8 blocker referred to as Compound 31 (C31, Bioorg. Med. Chem. Lett. 2010, 20, 6812; AbbVie Inc.). The aim of this study was to investigate the extent to which C31 treatment could also improve the motor axon function in P0......-of-concept that treatment with oral subtype-selective NaV1.8 blockers could be used to improve the motor function in severe forms of demyelinating CMT....

Analisi di minimizzazione dei costi del trattamento della leucemia cronica con fludarabina fosfato (Fludara® e.v. e p.o.: metodologia e risultati di un’indagine empirica

Directory of Open Access Journals (Sweden)

Carlo Lazzaro

2004-12-01

Full Text Available The aim of the paper is to compare healthcare-related costs of a 5-day course with fludarabine phosphate i.v. vs a 5-day course with oral fludarabine phosphate in Italian patients with chronic leukemia. A cost-minimization analysis was performed from both Italian National Healthcare Service (INHS and hospital perspectives. Healthcare-related costs were collected from 2 out of a sample of 28 Ematology wards and included those of drug acquisition, drug preparation, drug administration, reception and discharge of patient before and after drug administration; hospital overheads were calculated as a percentage of the total healthcare-related costs. The reimbursement schemes for acquisition and administration of fludarabine phosphate i.v. were gathered from the whole sample of 28 Ematology wards taken into account. Costs were expressed in euros 2004. When compared to fludarabine phosphate i.v., oral fludarabine phosphate allowed savings ranging from 223,47 euros (hospital perspective to 477,05 euros (INHS perspective per patient. As far as hospital perspective was concerned, savings associated with oral fludarabine phosphate were due to hospital overheads (115.1%, drug preparation (19.6%, drug administration (17.3%, reception and discharge of patient before and after drug administration (2.9%, whereas costs for drug acquisition was higher for oral formulation (-54.8%. When INHS perspective was taken into account, 3 out of 28 Ematology wards (11% were reimbursed on a drug-plus-outpatient-drug-administration-basis, whereas 25 out of 28 Ematology wards (89% were reimbursed on a day-hospital-stay-basis. Savings associated with oral fludarabine phosphate were due to day-hospital stay (253.4%, outpatient drug administration (1.1%, whereas cost for drug acquisition were higher for oral formulation (-154.5%. Sensitivity analysis confirmed the robustness of basecase results. Savings associated with oral fludarabine phosphate may be of relevant interest for

Revealing strategies of quorum sensing in Azospirillum brasilense strains Ab-V5 and Ab-V6.

Science.gov (United States)

Fukami, Josiane; Abrantes, Julia Laura Fernandes; Del Cerro, Pablo; Nogueira, Marco Antonio; Ollero, Francisco Javier; Megías, Manuel; Hungria, Mariangela

2018-01-01

Azospirillum brasilense is an important plant-growth promoting bacterium (PGPB) that requires several critical steps for root colonization, including biofilm and exopolysaccharide (EPS) synthesis and cell motility. In several bacteria these mechanisms are mediated by quorum sensing (QS) systems that regulate the expression of specific genes mediated by the autoinducers N-acyl-homoserine lactones (AHLs). We investigated QS mechanisms in strains Ab-V5 and Ab-V6 of A. brasilense, which are broadly used in commercial inoculants in Brazil. Neither of these strains carries a luxI gene, but there are several luxR solos that might perceive AHL molecules. By adding external AHLs we verified that biofilm and EPS production and cell motility (swimming and swarming) were regulated via QS in Ab-V5, but not in Ab-V6. Differences were observed not only between strains, but also in the specificity of LuxR-type receptors to AHL molecules. However, Ab-V6 was outstanding in indole acetic acid (IAA) synthesis and this molecule might mimic AHL signals. We also applied the quorum quenching (QQ) strategy, obtaining transconjugants of Ab-V5 and Ab-V6 carrying a plasmid with acyl-homoserine lactonase. When maize (Zea mays L.) was inoculated with the wild-type and transconjugant strains, plant growth was decreased with the transconjugant of Ab-V5-confirming the importance of an AHL-mediated QS system-but did not affect plant growth promotion by Ab-V6.

High-temperature oxidation of silicide-aluminide layer on the TiAl6V4 alloy prepared by liquid-phase siliconizing

Czech Academy of Sciences Publication Activity Database

Kubatík, Tomáš František

2016-01-01

Roč. 50, č. 2 (2016), s. 257-261 ISSN 1580-2949 Institutional support: RVO:61389021 Keywords : TiAl6V4 * silicides * high-temperature oxidation * liquid-phase silicon izing Subject RIV: JG - Metallurgy Impact factor: 0.436, year: 2016

Oral health status and treatment needs of asthmatic children aged 6 – 12 Years in Lucknow

Directory of Open Access Journals (Sweden)

Pramod Kumar Yadav

2017-01-01

Full Text Available Introduction: Asthma is a growing public health problem affecting over 300 million people worldwide. Asthmatic children have an altered immune response and a high tendency to mouth breathing especially during an episode of rhinitis or an attack thus predisposing them to serious oral health problems. Aim: This study aims to assess oral health status of asthmatic children aged 6–12. Materials and Methods: A cross-sectional study was conducted among 450 asthmatic children aged 6–12 years in Lucknow, asthmatic children were chosen from pediatric department of major hospitals. Gingival index (GI, oral hygiene index-simplified (OHI-S, and dentition status and treatment need of World Health Organization oral health survey pro forma (1997 were used to assess oral health status. ANOVA, Chi-square test, and descriptive statistics were carried out. SPSS 16 was used for the data analysis. Results: Mean dynamical mean-field theory (DMFT was 2.98 ± 1.52 and 3.05 ± 1.60, mean GI score was 1.55 ± 0.52 and 1.53 ± 0.42 and mean OHI-S was 2.59 ± 0.68 and 2.48 ± 0.77 among the male and female asthmatic children. Conclusion: Female asthmatic children had higher mean DMFT score, but lower mean GI score and oral hygiene score than male children in comparison and also they had a compromised oral hygiene status.

Additive manufactured Ti6Al4V scaffolds with the RF- magnetron sputter deposited hydroxyapatite coating

International Nuclear Information System (INIS)

Chudinova, E; Surmeneva, M; Surmenev, R; Koptioug, A; Scoglund, P

2016-01-01

Present paper reports on the results of surface modification of the additively manufactured porous Ti6Al4V scaffolds. Radio frequency (RF) magnetron sputtering was used to modify the surface of the alloy via deposition of the biocompatible hydroxyapatite (HA) coating. The surface morphology, chemical and phase composition of the HA-coated alloy were studied. It was revealed that RF magnetron sputtering allows preparing a homogeneous HA coating onto the entire surface of scaffolds. (paper)

Oral Health Status Related to Social Behaviors among 6 - 11 Year Old Schoolchildren in Kosovo

Directory of Open Access Journals (Sweden)

Lulëjeta Ferizi

2017-01-01

Full Text Available The aim of the present study was to evaluate the current oral health status among schoolchildren in Kosovo aged 6-11 years. Material and methods: A study included 5679 schoolchildren aged 6 -11 years, from different towns of Kosovo. Dental health status was evaluated using the World Health Organization (WHO caries diagnostic criteria for decayed, missing and filled teeth (dmft/DMFT index, for deciduous and permanent dentition. The observed children have answered a number of questions about their oral hygiene, eating habits, and dental visits. The analysis included frequencies and means. The differences between means were tested using the student t-test (p<0.05. The factors associated with dental caries were tested using the Spearman’s rank. Results: The mean dmft/DMFT of schoolchildren aged 6-11 years was 4.36 ± 3.763 and 1.20 ± 1.488, respectively. Sealant placements were found among 90 schoolchildren, amounting to 1.58%. From 8 years of age, 50% of children brush their teeth twice a day. Confectionery consumption among the observed children has increased. Forty percent of them eat sweets at least once a day, and majority of them visit their dentists only when necessary. A significant correlation between consumption of confectionery, oral hygiene, dental visits and the prevalence of caries was confirmed. Conclusion: The results of the present study show that there is a high prevalence of caries among 6-11 year old schoolchildren, thus pointing to a need for an extensive program of primary oral health care as well as utilizing preventive measures and regular dental visits.

Scalable and template-free synthesis of nanostructured Na{sub 1.08}V{sub 6}O{sub 15} as high-performance cathode material for lithium-ion batteries

Energy Technology Data Exchange (ETDEWEB)

Zheng, Shili, E-mail: slzheng@ipe.ac.cn [National Engineering Laboratory for Hydrometallurgical Cleaner Production Technology, Key Laboratory of Green Process and Engineering, Institute of Process Engineering, Chinese Academy of Sciences, Beijing (China); Wang, Xinran; Yan, Hong [National Engineering Laboratory for Hydrometallurgical Cleaner Production Technology, Key Laboratory of Green Process and Engineering, Institute of Process Engineering, Chinese Academy of Sciences, Beijing (China); University of Chinese Academy of Sciences, No. 19A Yuquan Road, Beijing (China); Du, Hao; Zhang, Yi [National Engineering Laboratory for Hydrometallurgical Cleaner Production Technology, Key Laboratory of Green Process and Engineering, Institute of Process Engineering, Chinese Academy of Sciences, Beijing (China)

2016-09-15

Highlights: • Nanostructured Na{sub 1.08}V{sub 6}O{sub 15} was synthesized through additive-free sol-gel process. • Prepared Na{sub 1.08}V{sub 6}O{sub 15} demonstrated high capacity and sufficient cycling stability. • The reaction temperature was optimized to allow scalable Na{sub 1.08}V{sub 6}O{sub 15} fabrication. - Abstract: Developing high-capacity cathode material with feasibility and scalability is still challenging for lithium-ion batteries (LIBs). In this study, a high-capacity ternary sodium vanadate compound, nanostructured NaV{sub 6}O{sub 15}, was template-free synthesized through sol-gel process with high producing efficiency. The as-prepared sample was systematically post-treated at different temperature and the post-annealing temperature was found to determine the cycling stability and capacity of NaV{sub 6}O{sub 15}. The well-crystallized one exhibited good electrochemical performance with a high specific capacity of 302 mAh g{sup −1} when cycled at current density of 0.03 mA g{sup −1}. Its relatively long-term cycling stability was characterized by the cell performance under the current density of 1 A g{sup −1}, delivering a reversible capacity of 118 mAh g{sup −1} after 300 cycles with 79% capacity retention and nearly 100% coulombic efficiency: all demonstrating its significant promise of proposed strategy for large-scale synthesis of NaV{sub 6}O{sub 15} as cathode with high-capacity and high energy density for LIBs.

Application of nanoparticles for oral delivery of acid-labile lansoprazole in the treatment of gastric ulcer: in vitro and in vivo evaluations.

Science.gov (United States)

Alai, Milind; Lin, Wen Jen

2015-01-01

The aim of this study was to develop nanoparticles for oral delivery of an acid-labile drug, lansoprazole (LPZ), for gastric ulcer therapy. LPZ-loaded positively charged Eudragit(®) RS100 nanoparticles (ERSNPs-LPZ) and negatively charged poly(lactic-co-glycolic acid) nanoparticles (PLGANPs-LPZ) were prepared. The effect of charge on nanoparticle deposition in ulcerated and non-ulcerated regions of the stomach was investigated. The cellular uptake of nanoparticles in the intestine was evaluated in a Caco-2 cell model. The pharmacokinetic performance and ulcer healing response of LPZ-loaded nanoparticles following oral administration were evaluated in Wistar rats with induced ulcers. The prepared drug-loaded ERSNPs-LPZ and PLGANPs-LPZ possessed opposite surface charge (+38.5±0.3 mV versus -27.3±0.3 mV, respectively) and the particle size was around 200 nm with a narrow size distribution. The negatively charged PLGANPs adhered more readily to the ulcerated region (7.22%±1.21% per cm(2)), whereas the positively charged ERSNPs preferentially distributed in the non-ulcerated region (8.29%±0.35% per cm(2)). Both ERSNPs and PLGANPs were prominent uptake in Caco-2 cells, too. The nanoparticles sustained and prolonged LPZ concentrations up to 24 hours, and the half-life and mean residence time of LPZ were prolonged by 3.5-fold and 4.5-fold, respectively, as compared with LPZ solution. Oral administration of LPZ-loaded nanoparticles healed 92.6%-95.7% of gastric ulcers in Wistar rats within 7 days.

Two Oral Midazolam Preparations in Pediatric Dental Patients: A Prospective Randomised Clinical Trial

Directory of Open Access Journals (Sweden)

Katayoun Salem

2015-01-01

Full Text Available Pharmacological sedation is an alternative behavior management strategy in pediatric dentistry. The aim of this study was to compare the behavioral and physiologic effects of “commercially midazolam syrup” versus “orally administered IV midazolam dosage form (extemporaneous midazolam (EF” in uncooperative pediatric dental patients. Eighty-eight children between 4 to 7 years of age received 0.2–0.5 mg/kg midazolam in this parallel trial. Physiologic parameters were recorded at baseline and every 15 minutes. Behavior assessment was conducted objectively by Houpt scale throughout the sedation and North Carolina at baseline and during injection and cavity preparation. No significant difference in behavior was noted by Houpt or North Carolina scale. Acceptable behavior (excellent, very good, and good was observed in 90.9% of syrup and 79.5% of EF subjects, respectively. Physiological parameters remained in normal range without significant difference between groups and no adverse effect was observed. It is concluded that EF midazolam preparation can be used as an acceptable alternative to midazolam syrup.

Improved tribological behavior of boron implanted Ti-6Al-4V

International Nuclear Information System (INIS)

Baker, N.P.; Walter, K.C.; Nastasi, M.

1998-03-01

Boron implanted of Ti6Al4V has been conducted at combinations of 32 and 40 keV to supplement that done previously at 75 keV. Shallower boron depth profiles with higher B-concentrations in the Ti64 surface have been obtained by tailoring the combinations of ion energy and dose. This work used three different ion energy and dose combinations of 4 x 10 17 B-at/cm 2 at 40 keV plus 2 x 10 17 B-at/cm 2 at 32 keV, 4 x 10 17 B-at/cm 2 at 40 keV, and 4 x 10 17 B-at/cm 2 at 32 keV plus 2 x 10 17 B-at/cm 2 at 40 keV. Comparisons are made between Ti6Al4V with a shallow implanted boron depth profile, Ti6Al4V with a deeper boron depth profile and nitrogen implanted using a plasma source ion implantation process. It has been previously shown that while boron implanted Ti64 has a ∼ 30% higher surface hardness than nitrogen implanted Ti64, the N-implantation reduced the wear coefficient of Ti64 by 25--120x, while B-implantation reduced the wear coefficient by 6.5x or less. The results show that no significant improvement is made in the wear resistance of boron implanted Ti6Al4V by increasing the concentration of boron at the surface from approximately 10% to 43%. Transmission electron microscopy (TEM) and selected area diffraction (SAD) indicated the formation of crystalline TiB in the implanted surface layer. Shallower depth profiles result in reductions of the Ti6Al4V wear coefficient by 6.5x or less which is the same result obtained earlier with the deeper boron depth profile. Surface hardness of Ti6Al4V with shallower boron depth profiles was improved approximately 10% compared to the results previously acquired with deeper boron depth profiles

Spark Plasma Sintering (SPS)-Assisted Synthesis and Thermoelectric Characterization of Magnéli Phase V6O11

KAUST Repository

Joos, Markus

2018-01-11

The Magnéli phase V6O11 was synthesized in gram amounts from a powder mixture of V6O11/V7O13 and vanadium metal, using the spark plasma sintering (SPS) technique. Its structure was determined with synchrotron X-ray powder diffraction data from a phase-pure sample synthesized by conventional solid-state synthesis. A special feature of Magnéli-type oxides is a combination of crystallographic shear and intrinsic disorder that leads to relatively low lattice thermal conductivities. SPS prepared V6O11 has a relatively low thermal conductivity of κ = 2.72 ± 0.06 W (m K)-1 while being a n-type conductor with an electrical conductivity of σ = 0.039 ± 0.005 (μΩ m)-1, a Seebeck coefficient of α = -(35 ± 2) μV K-1, which leads to a power factor of PF = 4.9 ± 0.8 × 10-5W (m K2)-1 at ∼600 K. Advances in the application of Magnéli phases are mostly hindered by synthetic and processing challenges, especially when metastable and nanostructured materials such as V6O11 are involved. This study gives insight into the complications of SPS-assisted synthesis of complex oxide materials, provides new information about the thermal and electrical properties of vanadium oxides at high temperatures, and supports the concept of reducing the thermal conductivity of materials with structural building blocks such as crystallographic shear (CS) planes.

Spark Plasma Sintering (SPS)-Assisted Synthesis and Thermoelectric Characterization of Magnéli Phase V6O11

KAUST Repository

Joos, Markus; Cerretti, Giacomo; Veremchuk, Igor; Hofmann, Patrick; Frerichs, Hajo; Anjum, Dalaver H.; Reich, Tobias; Lieberwirth, Ingo; Panthö fer, Martin; Zeier, Wolfgang G.; Tremel, Wolfgang

2018-01-01

The Magnéli phase V6O11 was synthesized in gram amounts from a powder mixture of V6O11/V7O13 and vanadium metal, using the spark plasma sintering (SPS) technique. Its structure was determined with synchrotron X-ray powder diffraction data from a phase-pure sample synthesized by conventional solid-state synthesis. A special feature of Magnéli-type oxides is a combination of crystallographic shear and intrinsic disorder that leads to relatively low lattice thermal conductivities. SPS prepared V6O11 has a relatively low thermal conductivity of κ = 2.72 ± 0.06 W (m K)-1 while being a n-type conductor with an electrical conductivity of σ = 0.039 ± 0.005 (μΩ m)-1, a Seebeck coefficient of α = -(35 ± 2) μV K-1, which leads to a power factor of PF = 4.9 ± 0.8 × 10-5W (m K2)-1 at ∼600 K. Advances in the application of Magnéli phases are mostly hindered by synthetic and processing challenges, especially when metastable and nanostructured materials such as V6O11 are involved. This study gives insight into the complications of SPS-assisted synthesis of complex oxide materials, provides new information about the thermal and electrical properties of vanadium oxides at high temperatures, and supports the concept of reducing the thermal conductivity of materials with structural building blocks such as crystallographic shear (CS) planes.

Enhancing the Solubility and Oral Bioavailability of Poorly Water-Soluble Drugs Using Monoolein Cubosomes.

Science.gov (United States)

Ali, Md Ashraf; Kataoka, Noriko; Ranneh, Abdul-Hackam; Iwao, Yasunori; Noguchi, Shuji; Oka, Toshihiko; Itai, Shigeru

2017-01-01

Monoolein cubosomes containing either spironolactone (SPI) or nifedipine (NI) were prepared using a high-pressure homogenization technique and characterized in terms of their solubility and oral bioavailability. The mean particle size, polydispersity index (PDI), zeta potential, solubility and encapsulation efficiency (EE) values of the SPI- and NI-loaded cubosomes were determined to be 90.4 nm, 0.187, -13.4 mV, 163 µg/mL and 90.2%, and 91.3 nm, 0.168, -12.8 mV, 189 µg/mL and 93.0%, respectively, which were almost identical to those of the blank cubosome. Small-angle X-ray scattering analyses confirmed that the SPI-loaded, NI-loaded and blank cubosomes existed in the cubic space group Im3̄m. The lattice parameters of the SPI- and NI-loaded cubosomes were 147.6 and 151.6 Å, respectively, making them almost identical to that of blank cubosome (151.0 Å). The in vitro release profiles of the SPI- and NI-loaded cubosomes showed that they released less than 5% of the drugs into various media over 12-48 h, indicating that most of the drug remained encapsulated within the cubic phase of their lipid bilayer. Furthermore, the in vivo pharmacokinetic results suggested that these cubosomes led to a considerable increase in the systemic oral bioavailability of the drugs compared with pure dispersions of the same materials. Notably, the stability results indicated that the mean particle size and PDI values of these cubosomes were stable for at least 4 weeks. Taken together, these results demonstrate that monoolein cubosomes represent promising drug carriers for enhancing the solubility and oral bioavailability of poorly water-soluble drugs.

Robust species taxonomy assignment algorithm for 16S rRNA NGS reads: application to oral carcinoma samples

Directory of Open Access Journals (Sweden)

Nezar Noor Al-Hebshi

2015-09-01

Full Text Available Background: Usefulness of next-generation sequencing (NGS in assessing bacteria associated with oral squamous cell carcinoma (OSCC has been undermined by inability to classify reads to the species level. Objective: The purpose of this study was to develop a robust algorithm for species-level classification of NGS reads from oral samples and to pilot test it for profiling bacteria within OSCC tissues. Methods: Bacterial 16S V1-V3 libraries were prepared from three OSCC DNA samples and sequenced using 454's FLX chemistry. High-quality, well-aligned, and non-chimeric reads ≥350 bp were classified using a novel, multi-stage algorithm that involves matching reads to reference sequences in revised versions of the Human Oral Microbiome Database (HOMD, HOMD extended (HOMDEXT, and Greengene Gold (GGG at alignment coverage and percentage identity ≥98%, followed by assignment to species level based on top hit reference sequences. Priority was given to hits in HOMD, then HOMDEXT and finally GGG. Unmatched reads were subject to operational taxonomic unit analysis. Results: Nearly, 92.8% of the reads were matched to updated-HOMD 13.2, 1.83% to trusted-HOMDEXT, and 1.36% to modified-GGG. Of all matched reads, 99.6% were classified to species level. A total of 228 species-level taxa were identified, representing 11 phyla; the most abundant were Proteobacteria, Bacteroidetes, Firmicutes, Fusobacteria, and Actinobacteria. Thirty-five species-level taxa were detected in all samples. On average, Prevotella oris, Neisseria flava, Neisseria flavescens/subflava, Fusobacterium nucleatum ss polymorphum, Aggregatibacter segnis, Streptococcus mitis, and Fusobacterium periodontium were the most abundant. Bacteroides fragilis, a species rarely isolated from the oral cavity, was detected in two samples. Conclusion: This multi-stage algorithm maximizes the fraction of reads classified to the species level while ensuring reliable classification by giving priority to the

Preparation of Polyamide-6 Submicrometer-Sized Spheres by In Situ Polymerization.

Science.gov (United States)

Zhao, Xingke; Xia, Housheng; Fu, Xubing; Duan, Jianping; Yang, Guisheng

2015-11-01

Polyamide-6 (PA6) submicron-sized spheres are prepared by two steps: (1) anionic ring-opening polymerization of ε-caprolactam in the presence of poly(ethylene glycol)-block-poly-(propylene glycol)-block-poly(ethylene glycol)(PEG-b-PPG-b-PEG) and (2) separation of PA6 spheres by dissolving PEG-b-PPG-b-PEG from the prepared blends. The PA6 microspheres obtained are regular spherical, with diameter ranging from 200 nm to 2 μm and narrow size distribution, as confirmed by scanning electron microscopy. By comparison with PA6/PS and PA6/PEG systems, it is denominated that the PEG blocks in PEG-b-PPG-b-PEG can effectively reduce the surface tension of PA6 droplets and further decrease the diameter of the PA6 microspheres. The PPG block in PEG-b-PPG-b-PEG can prevent the PA6 droplets coalescing with each other, and isolated spherical particles can be obtained finally. The phase inversion of the PA6/PEG-b-PPG-b-PEG blends occurs at very low PEG-b-PPG-b-PEG content; the PEG-b-PPG-b-PEG phase can be removed by water easily. The whole experiment can be finished in a short time (approximately in half an hour) without using any organic solvents; it is an efficient strategy for the preparation of submicron-sized PA6 microspheres. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Administración de medicamentos por vía oral: Interacciones medicamento - alimento Oral drug administration: drug-food interactions

Directory of Open Access Journals (Sweden)

Nélida Barrueco

2008-03-01

Full Text Available Introducción: la vía oral de administración de medicamentos es la vía más cómoda, segura y económica. Sin embargo, pueden existir interacciones con otros fármacos o con alimentos que alteren la eficacia y seguridad de los mismos. Objetivo: desarrollar un programa de información dirigido a enfermeros y enfermeras sobre la administración de medicamentos por vía oral. Método: se seleccionan los medicamentos más utilizados en el área de cardiología pediátrica, revisándose para cada principio activo la administración en relación con alimentos o productos medicinales y otros aspectos relacionados con la administración por vía oral. Resultados: se elabora una tabla informativa sobre un total de 28 principios activos. Discusión: Los farmacéuticos de hospital se han integrado recientemente en los equipos multidisciplinares y desde esta posición tienen la oportunidad de desarrollar diferentes programas de atención farmacéutica, educación sanitaria e información encaminadas a prevenir problemas relacionados con los medicamentos, aumentar su uso seguro y disminuir los riesgos asociados a cualquier tratamiento farmacológico. Las prescripciones médicas generalmente no indican el horario y la forma de administración de los medicamentos, dejando a enfermeros y enfermeras la responsabilidad de su organización. Por esto deben estar informados de cómo y cuándo se deben administrar los medicamentos, lo que permite garantizar su uso seguro y disminuir los riesgos asociados al tratamiento.Background: The easiest, safest and cheapest way to administrate drugs is by mouth (PO. Nevertheless, there may be interactions, either with other drugs or with food, which can modify efficacy and security of the drug itself. Objective: the development of a nursing information program about the administration of drugs PO. Method: we selected the most used drugs corresponding to the pediatric cardiology area, looking for the best administration

The Tribological Performance of Surface Treated Ti6A14V as Sliding Against Si3N4 Ball and 316L Stainless Steel Cylinder

Science.gov (United States)

Kao, W. H.; Su, Y. L.; Horng, J. H.; Huang, H. C.

2016-12-01

Closed field unbalanced magnetron sputtering was used to deposit diamond-like carbon (Ti-C:H) coatings on Ti6Al4V alloy and gas nitrided Ti6Al4V alloy. Four different specimens were prepared, namely untreated Ti6Al4V alloy (Ti6Al4V), gas nitrided Ti6Al4V alloy (N-Ti6Al4V), Ti-C:H-coated Ti6Al4V alloy (Ti-C:H/Ti6Al4V) and Ti-C:H-coated gas nitrided Ti6Al4V alloy (Ti-C:H/N-Ti6Al4V). The tribological properties of the four specimens were evaluated using a reciprocating wear tester sliding against a Si3N4 ball (point contact mode) and 316L stainless steel cylinder (line contact mode). The wear tests were performed in a 0.89 wt.% NaCl solution. The results showed that the nitriding treatment increased the surface roughness and hardness of the Ti6Al4V alloy and improved the wear resistance as a result. In addition, the Ti-C:H coating also improved the tribological performance of Ti6Al4V. For example, compared to the untreated Ti6Al4V sample, the Ti-C:H coating reduced the wear depth and friction coefficient by 340 times and 10 times, respectively, in the point contact wear mode, and 151 times and 9 times, respectively, in the line contact wear mode. It is thus inferred that diamond-like carbon coatings are of significant benefit in extending the service life of artificial biomedical implants.

Corrosion kinetics and topography analysis of Ti–6Al–4V alloy subjected to different mouthwash solutions

Energy Technology Data Exchange (ETDEWEB)

Faverani, Leonardo Perez [Department of Surgery and Integrated Clinic, Aracatuba Dental School, Univ Estadual Paulista (UNESP), Jose Bonifacio, 1193, Aracatuba, São Paulo 16015-050 (Brazil); Department of Dental Materials and Prosthodontics, Aracatuba Dental School, Univ Estadual Paulista (UNESP), Jose Bonifacio, 1193, Aracatuba, São Paulo 16015-050 (Brazil); Barao, Valentim Adelino Ricardo, E-mail: barao@fop.unicamp.br [Department of Prosthodontics and Periodontology, Piracicaba Dental School, University of Campinas (UNICAMP), Av. Limeira 901, Piracicaba, São Paulo 13414-903 (Brazil); Pires, Maria Flávia Araújo [Department of Dental Materials and Prosthodontics, Aracatuba Dental School, Univ Estadual Paulista (UNESP), Jose Bonifacio, 1193, Aracatuba, São Paulo 16015-050 (Brazil); Yuan, Judy Chia-Chun; Sukotjo, Cortino [Department of Restorative Dentistry, University of Illinois at Chicago-College of Dentistry, 801 S Paulina, Chicago, IL 60612-7211 (United States); Mathew, Mathew T. [Department of Orthopedic Surgery, Rush University Medical Center, 1611 West Harrison, Chicago, IL 60612-7211 (United States); Assunção, Wirley Gonçalves [Department of Dental Materials and Prosthodontics, Aracatuba Dental School, Univ Estadual Paulista (UNESP), Jose Bonifacio, 1193, Aracatuba, São Paulo 16015-050 (Brazil)

2014-10-01

This study evaluated the corrosion kinetics and surface topography of Ti–6Al–4V alloy exposed to mouthwash solutions (0.12% chlorhexidine digluconate, 0.053% cetylpyridinium chloride and 3% hydrogen peroxide) compared to artificial saliva (pH 6.5) (control). Twenty Ti–6Al–4V alloy disks were used and divided into 4 groups (n = 5). For the electrochemical assay, standard tests as open circuit potential and electrochemical impedance spectroscopy (EIS) were applied at baseline, 7 and 14 days after immersion in the solutions. Scanning electron microscopy, atomic force microscopy and profilometry (average roughness — R{sub a}) were used for surface characterization. Total weight loss of disks was calculated. Data were analyzed by ANOVA and Bonferroni's test (α = 0.05). Hydrogen peroxide generated the lowest polarization resistance (R{sub p}) values for all periods (P < 0.05). For the capacitance (C{sub dl}), similar results were observed among groups at baseline (P = 0.098). For the 7 and 14-day periods, hydrogen peroxide promoted the highest C{sub dl} values (P < 0.0001). Hydrogen peroxide promoted expressive superficial changes and greater Ra values than the others (P < 0.0001). It could be concluded that solutions containing cetylpyridinium chloride and chlorhexidine digluconate might be the mouthwashes of choice during the post-operatory period of dental implants. However, hydrogen peroxide is counter-indicated in these situations. Further studies evaluating the dynamics of these solutions (tribocorrosion) and immersing the disks in daily cycles (two or three times a day) to mimic a clinical situation closest to the application of mouthwashes in the oral cavity are warranted to prove our results. - Highlights: • Long-term electrochemical stability of Ti–6Al–4V in mouthwashes was investigated. • 3% percent hydrogen peroxide reduced the corrosion resistance of the Ti–6Al–4V. • Ti is stable in 0.12% chlorhexidine digluconate and 0

Test of 6-in.-thick pressure vessels. Series 3: intermediate test vessel V-7A under sustained loading

International Nuclear Information System (INIS)

Bryan, R.H.; Cate, T.M.; Holz, P.P.; King, T.A.; Merkle, J.G.; Robinson, G.C.; Smith, G.C.; Smith, J.E.; Whitman, G.D.

1978-01-01

HSST intermediate test vessel V-7 was repaired after being tested hydrostatically to leakage and was retested pneumatically as vessel V-7A. Except for the method of applying the load, the conditions in both tests were nearly identical. In each case, a sharp outside surface flaw 547 mm long (18 in.) by about 135 mm deep (5.3 in.) was prepared in the 152-mm-thick (6-in.) test cylinder of A533, grade B, class 1 steel. The inside surface of vessel V-7A was sealed in the region of the flaw by a thin metal patch so that pressure could be sustained after rupture. Vessel V-7A failed by rupture of the flaw ligament without burst, as expected. Rupture occurred at 144.3 MPa (20.92 ksi), after which pressure was sustained for 30 min without any indication of instability. The rupture pressure of vessel V-7A was about 2 percent less than that of vessel V-7

Protective Sliding Carbon-Based Nanolayers Prepared by Argon or Nitrogen Ion-Beam Assisted Deposition on Ti6Al4V Alloy

Czech Academy of Sciences Publication Activity Database

Vlčák, P.; Jirka, Ivan

2016-01-01

Roč. 2016, č. 2016 (2016), 1697090 ISSN 1687-4110 Institutional support: RVO:61388955 Keywords : carbon-based nanolayers * Ti6Al4V * nanotechnology Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 1.871, year: 2016

Oral and parenteral pyridostigmine in preparing Myasthenia Gravis patients for thymectomy;a randomized Clinical trial

Directory of Open Access Journals (Sweden)

Tadjeddein A

2007-06-01

Full Text Available Background: Respiratory failure and crisis is one of major complications of thymectomy in myasthenia gravis patients. There are different medication regimes for preparing these patients for surgery and reducing post-operative side effects. The goal of this study is to compare respiratory complications of oral vs. Parenteral preoperative administration of anticholinesterase agents for thymectomy in myasthenia gravis patients. Methods: This randomized controlled trial included 101 patients in class IIA or IIB of myasthenia gravis according to the Osserman classification system. The control group fasted for eight hours before surgery and oral anticholines-terase agents were replaced with parenteral ones. The case group also fasted for 8 hours before surgery, but pyridostigmine was continued at its usual dose until the time of operation and the last dose was given to patients with a small amount of water in the operating room on the operating bed. Results: There was no statistically meaningful difference between the two groups in terms of age, sex and pathologic findings. In comparison, the mean hospital stay for the case group was 3.98 days and 6.34 for the control group (p value = 0.003. There were eight cases of respiratory crisis or failure (16% in the control group but only 1 case (2% was observed in case group (p value = 0.014. Only one patient in the case group required re-intubation after the surgery; however, six patients in control group were re-intubated (p value = 0.053. Plasmapheresis was required for five patients in the control group and one patient in the case group (p value = 0.098. Tracheostomy was performed on two patients in the control group to accommodate prolonged intubation, but none of the case group required this procedure. Conclusion: This study shows that continuing oral anticholinesterase agents up to the time of operation, with the last dose at the operative theater, lowers the incidence of post-operative myasthenia

Investigation of nano-structured Zirconium oxide film on Ti6Al4V substrate to improve tribological properties prepared by PIII&D

Energy Technology Data Exchange (ETDEWEB)

Saleem, Sehrish [Department of Physics, Government College University, Lahore 54000 (Pakistan); Department of Physics and Materials Science, City University of Hong Kong, Tat Chee Avenue, Kowloon (Hong Kong); Ahmad, R., E-mail: ahriaz@gcu.edu.pk [Department of Physics, Government College University, Lahore 54000 (Pakistan); Centre for Advanced Studies in Physics (CASP), Government College University, Lahore 54000 (Pakistan); Ayub, R. [Centre for Advanced Studies in Physics (CASP), Government College University, Lahore 54000 (Pakistan); Ikhlaq, Uzma [Department of Physics, Government College University, Lahore 54000 (Pakistan); Jin, Weihong; Chu, Paul K. [Department of Physics and Materials Science, City University of Hong Kong, Tat Chee Avenue, Kowloon (Hong Kong)

2017-02-01

Highlights: • ZrO{sub 2} film was deposited on Ti6Al4V alloy using the plasma immersion ion implantation and deposition at various bias voltage. • The deposited film was characterized by XPS, AFM, Ellipometry, Nano-indentation and Pin-on disk machine. • A dense zirconium oxide film with the maximum thickness 108 nm was formed at maximum applied voltage. • The hardness and wear resistance of film is much higher as compared to the substrate. - Abstract: Plasma immersion ion implantation and deposition (PIII&D) is the most attractive and efficient technique used in the medical field to tailor materials for biomedical applications. In the present study zirconium oxide nano-structured thin films were deposited on surface of Ti6Al4V alloy for bias voltages of 15, 20 and 25 kV. The chemical composition, surface roughness and thickness of deposited films were characterized by the x-ray photoelectron spectroscopy (XPS), atomic force microscope (AFM) and ellipsometry respectively. The XPS results confirm the formation of a dense zirconium oxide film of the treated specimens. AFM results exhibit a smooth film with maximum roughness of about 8.4 nm is formed. The thickness of the film is increased with the increase in bias voltages and is maximum at 25 kV. The effect of bias voltages on wear characteristics was further investigated by pin-on-disk test. It is observed that the friction coefficient is reduced, whereas wear resistance is enhanced and it is found to be maximum at 25 kV compared to the other bias voltages. Nanohardness is improved up to twice compared to untreated specimen at the maximum bias voltage. Therefore, it is concluded that deposition of zirconium oxide using the PIII&D is produced a dense layer on the substrate surface, which can be used as a promising candidate for the improved tribological properties of Ti6Al4V.

Modification of Ti6Al4V surface by diazonium compounds

Science.gov (United States)

Sandomierski, Mariusz; Buchwald, Tomasz; Strzemiecka, Beata; Voelkel, Adam

2018-02-01

Ti6Al4V alloy is the most commonly used in orthopedic industry as an endoprosthesis. Ti6Al4V exhibits good mechanical properties, except the abrasion resistance. Surface modification of Ti6Al4V in order to obtain organic layer, and then the attachment of the polymer, can allow for overcoming this problem. The aim of the work was the modification of Ti6Al4V surface by diazonium compounds: salt or cation generated in situ and examine the influence of the reducing agent - ascorbic acid, and the temperature of reaction on modification process. Moreover, the simulated body fluid was used for the assessment of the organic layer stability on Ti6Al4V surface. The evaluation of the modification was carried out using the following methods: Raman microspectroscopy, scanning electron microscopy and energy-dispersive X-ray spectroscopy. Higher temperature of modification by 4-hydroxymethylbenzenediazonium cation, provides the largest amount of organic layer on the Ti6Al4V alloy. In the case of the Ti6Al4V modified by Variamine Blue B salt, the amount of organic layer is not dependent on the reaction condition. Moreover, the ascorbic acid and the presence of TiO2 does not effect on the modification. The modified surface is completely coated with the organic layer which is stable in simulated body fluid.

Betel nut chewing, oral premalignant lesions, and the oral microbiome.

Science.gov (United States)

Hernandez, Brenda Y; Zhu, Xuemei; Goodman, Marc T; Gatewood, Robert; Mendiola, Paul; Quinata, Katrina; Paulino, Yvette C

2017-01-01

Oral cancers are attributed to a number of causal agents including tobacco, alcohol, human papillomavirus (HPV), and areca (betel) nut. Although betel nut chewing has been established as an independent cause of oral cancer, the mechanisms of carcinogenesis are poorly understood. An investigation was undertaken to evaluate the influence of betel nut chewing on the oral microbiome and oral premalignant lesions. Study participants were recruited from a dental clinic in Guam. Structured interviews and oral examinations were performed. Oral swabbing and saliva samples were evaluated by 454 pyrosequencing of the V3- V5 region of the 16S rRNA bacterial gene and genotyped for HPV. One hundred twenty-two adults were enrolled including 64 current betel nut chewers, 37 former chewers, and 21 with no history of betel nut use. Oral premalignant lesions, including leukoplakia and submucous fibrosis, were observed in 10 chewers. Within-sample bacterial diversity was significantly lower in long-term (≥10 years) chewers vs. never chewers and in current chewers with oral lesions vs. individuals without lesions. Between-sample bacterial diversity based on Unifrac distances significantly differed by chewing status and oral lesion status. Current chewers had significantly elevated levels of Streptococcus infantis and higher and lower levels of distinct taxa of the Actinomyces and Streptococcus genera. Long-term chewers had reduced levels of Parascardovia and Streptococcus. Chewers with oral lesions had significantly elevated levels of Oribacterium, Actinomyces, and Streptococcus, including Streptococcus anginosus. In multivariate analyses, controlling for smoking, oral HPV, S.anginosus, and S. infantis levels, current betel nut chewing remained the only predictor of oral premalignant lesions. Our study provides evidence that betel nut chewing alters the oral bacterial microbiome including that of chewers who develop oral premalignant lesions. Nonetheless, whether microbial changes

Protective Sliding Carbon-Based Nanolayers Prepared by Argon or Nitrogen Ion-Beam Assisted Deposition on Ti6Al4V Alloy

Directory of Open Access Journals (Sweden)

Petr Vlcak

2016-01-01

Full Text Available The microstructure and the surface properties of samples coated by carbon-based nanolayer were investigated in an effort to increase the surface hardness and reduce the coefficient of friction of the Ti6Al4V alloy. Protective carbon-based nanolayers were fabricated by argon or nitrogen ion-beam assisted deposition at ion energy of 700 eV on Ti6Al4V substrates. The Raman spectra indicated that nanolayers had a diamond-like carbon character with sp2 rich bonds. The TiC and TiN compounds formed in the surface area were detected by X-ray diffraction. Nanoscratch tests showed increased adhesion of a carbon-based nanolayer deposited with ion assistance in comparison with a carbon nanolayer deposited without ion assistance. The results showed that argon ion assistance leads to greater nanohardness than a sample coated by a carbon-based nanolayer with nitrogen ion assistance. A more than twofold increase in nanohardness and a more than fivefold decrease in the coefficient of friction were obtained for samples coated by a carbon-based nanolayer with ion assistance, in comparison with the reference sample.

Pharmacokinetic Profile of Oral Cannabis in Humans: Blood and Oral Fluid Disposition and Relation to Pharmacodynamic Outcomes.

Science.gov (United States)

Vandrey, Ryan; Herrmann, Evan S; Mitchell, John M; Bigelow, George E; Flegel, Ronald; LoDico, Charles; Cone, Edward J

2017-03-01

Most research on cannabis pharmacokinetics has evaluated inhaled cannabis, but oral ("edible") preparations comprise an increasing segment of the cannabis market. To assess oral cannabis pharmacokinetics and pharmacodynamics, healthy adults (N = 6 per dose) were administered cannabis brownies containing 10, 25 or 50 mg 9-tetrahydrocannabinol (THC). Whole blood and oral fluid specimens were obtained at baseline and then for 9 days post-exposure; 6 days in a residential research setting and 3 days as outpatients. Measures of subjective, cardiovascular and performance effects were obtained at baseline and for 8 h post-ingestion. The mean Cmax for THC in whole blood was 1, 3.5 and 3.3 ng/mL for the 10, 25 and 50 mg THC doses, respectively. The mean maximum concentration (Cmax) and mean time to maximum concentration (Tmax) of 11-OH-THC in whole blood were similar to THC. Cmax blood concentrations of THCCOOH were generally higher than THC and had longer Tmax values. The mean Tmax for THC in oral fluid occurred immediately following oral dose administration, and appear to reflect local topical residue rather than systemic bioavailbility. Mean Cmax oral fluid concentrations of THCCOOH were lower than THC, erratic over time and mean Tmax occurred at longer times than THC. The window of THC detection ranged from 0 to 22 h for whole blood (limit of quantitation (LOQ) = 0.5 ng/mL) and 1.9 to 22 h for oral fluid (LOQ = 1.0 ng/mL). Subjective drug and cognitive performance effects were generally dose dependent, peaked at 1.5-3 h post-administration, and lasted 6-8 h. Whole blood cannabinoid concentrations were significantly correlated with subjective drug effects. Correlations between blood cannabinoids and cognitive performance measures, and between oral fluid and all pharmacodynamic outcomes were either non-significant or not orderly by dose. Quantitative levels of cannabinoids in whole blood and oral fluid were low compared with levels observed following inhalation of

Preoperative oral antibiotics reduce surgical site infection following elective colorectal resections.

Science.gov (United States)

Cannon, Jamie A; Altom, Laura K; Deierhoi, Rhiannon J; Morris, Melanie; Richman, Joshua S; Vick, Catherine C; Itani, Kamal M F; Hawn, Mary T

2012-11-01

Surgical site infection is a major cause of morbidity after colorectal resections. Despite evidence that preoperative oral antibiotics with mechanical bowel preparation reduce surgical site infection rates, the use of oral antibiotics is decreasing. Currently, the administration of oral antibiotics is controversial and considered ineffective without mechanical bowel preparation. The aim of this study is to examine the use of mechanical bowel preparation and oral antibiotics and their relationship to surgical site infection rates in a colorectal Surgical Care Improvement Project cohort. This retrospective study used Veterans Affairs Surgical Quality Improvement Program preoperative risk and surgical site infection outcome data linked to Veterans Affairs Surgical Care Improvement Project and Pharmacy Benefits Management data. Univariate and multivariable models were performed to identify factors associated with surgical site infection within 30 days of surgery. This study was conducted in 112 Veterans Affairs hospitals. Included were 9940 patients who underwent elective colorectal resections from 2005 to 2009. The primary outcome measured was the incidence of surgical site infection. Patients receiving oral antibiotics had significantly lower surgical site infection rates. Those receiving no bowel preparation had similar surgical site infection rates to those who had mechanical bowel preparation only (18.1% vs 20%). Those receiving oral antibiotics alone had an surgical site infection rate of 8.3%, and those receiving oral antibiotics plus mechanical bowel preparation had a rate of 9.2%. In adjusted analysis, the use of oral antibiotics alone was associated with a 67% decrease in surgical site infection occurrence (OR=0.33, 95% CI 0.21-0.50). Oral antibiotics plus mechanical bowel preparation was associated with a 57% decrease in surgical site infection occurrence (OR=0.43, 95% CI 0.34-0.55). Timely administration of parenteral antibiotics (Surgical Care Improvement

Ensino sobre perioperatório a pacientes: estudo comparativo de recursos audiovisual (vídeo e oral Enseñanza a pacientes sobre el perioperatorio: estudio comparativo entre usos de recursos Teaching on perioperative nursing: a comparative study on audiovisual (video and oral resources

Directory of Open Access Journals (Sweden)

Adriana Aparecida Delloiagono de Paula

1997-07-01

Full Text Available A finalidade do estudo foi comparar, na informação perioperatória de Enfermagem, os recursos audiovisual (vídeo e oral. Registrou-se como sujeitos 104 pacientes, sendo 54 e 50 para os grupos oral e vídeo, respectivamente. Concluiu-se que os grupos de pacientes eram homogêneos e que não havia diferença significativa entre os dois recursos utilizados, e que independente do recurso utilizado, as respostas emitidas foram qualitativamente melhores. Porém na informação perioperatória com o vídeo utilizou-se 10 minutos e na oral 45 minutos, sendo que o vídeo impede o verbalismo característico dos métodos expositivos e reduz o tempo gasto no oferecimento das informações.La finalidad de este estudio fue comparar en la fase perioperatoria de enfermería los dos niveles de aprendizaje, usando recursos (vídeo y usando solo información oral. Se registraron 104 pacientes de los cuales a 54 se les dio información oral y a 50 se usó vídeo. Se concluyó que los grupos eran homogéneos y que no había diferencias significativas entre los dos métodos utilizados y que independientemente de los recursos las respuestas eran cualitativamente mejores. Pero en la información con vídeo se utilizó 10 minutos y en la forma oral 45 minutos, porque el vídeo impide el verbalismo característico de los métodos expositivos y por ello reduce el tiempo gastado en el ofrecimiento de las informaciones.The aim of this study was to compare information on perioperative Nursing regarding audiovisual (video and oral resources. 104 patients were registered as subjects and divided in two groups, 54 of them in the oral group and 50 in the video group. Authors concluded that the groups were homogeneous and that there was no significant difference between the two resources used. Independent from the resource used, the responses were qualitatively better. However, regarding perioperative informations, authors spent 10 minutes using the video while oral information

Microcontainers as an oral delivery system for spray dried cubosomes containing ovalbumin

DEFF Research Database (Denmark)

Nielsen, Line Hagner; Rades, Thomas; Boyd, Ben

2017-01-01

The purpose of this study was to prepare cubosomes encapsulating the model antigen ovalbumin (OVA) via spray drying, and to characterise such cubosomes with a view for their potential application in oral vaccine delivery. Furthermore the cubosome formulation was loaded into polymeric...... microcontainers intended as an oral drug delivery system. The cubosomes consisted of commercial glyceryl monooleate, Dimodan®, containing OVA and were surrounded with a dextran shell prepared by spray drying. Cryo-TEM was used to confirm that cubosomes were formed after hydration of the spray dried precursor...... the cubosomes and microcontainers occurred at pH 6.8, releasing 44.1±5.6% of the OVA in 96h. Small-angle X-ray scattering (SAXS) revealed that the 'dry' particles possessed an internal ordered lipid structure (lamellar and inverse micellar phase) by virtue of a small amount of residual water, and after...

Grindability of cast Ti-6Al-4V alloyed with copper.

Science.gov (United States)

Watanabe, Ikuya; Aoki, Takayuki; Okabe, Toru

2009-02-01

This study investigated the grindability of cast Ti-6Al-4V alloyed with copper. The metals tested were commercially pure titanium (CP Ti), Ti-6Al-4V, experimental Ti-6Al-4V-Cu (1, 4, and 10 wt% Cu), and Co-Cr alloy. Each metal was cast into five blocks (3.0 x 8.0 x 30.0 mm(3)). The 3.0-mm wide surface of each block was ground using a hand-piece engine with an SiC wheel at four circumferential speeds (500, 750, 1000, and 1250 m/min) at a grinding force of 100 g. The grindability index (G-index) was determined as volume loss (mm(3)) calculated from the weight loss after 1 minute of grinding and the density of each metal. The ratio of the metal volume loss and the wheel volume loss was also calculated (G-ratio, %). Data (n = 5) were statistically analyzed using ANOVA (alpha= 0.05). Ti-6Al-4V and the experimental Ti-6Al-4V-Cu alloys exhibited significantly (p grindability of some of the resultant Ti-6Al-4V-Cu alloys.

Immunohistochemical Analysis of the Activation Status of the Akt/mTOR/pS6 Signaling Pathway in Oral Lichen Planus

Directory of Open Access Journals (Sweden)

Georgios Prodromidis

2013-01-01

Full Text Available Introduction. Aberrations of the Akt/mTOR/pS6 pathway have been linked to various types of human cancer, including oral squamous cell carcinoma (OSCC. The purpose of this study was to evaluate the activation status of Akt, mTOR, and pS6 in oral lichen planus (OLP in comparison with oral premalignant and malignant lesions and normal oral mucosa (NM. Materials and Methods. Immunohistochemistry for p-Akt, p-mTOR, and phospho-pS6 was performed in 40 OLP, 20 oral leukoplakias (OL, 10 OSCC, and 10 control samples of NM. Results. Nuclear p-Akt expression was detected in the vast majority of cases in all categories, being significantly higher in OL. Cytoplasmic p-Akt and p-mTOR staining was present only in a minority of OLP cases, being significantly lower compared to OL and OSCC. Phospho-pS6 showed cytoplasmic positivity in most OLP cases, which however was significantly lower compared to OL and OSCC. Conclusions. Overall, cytoplasmic p-Akt, p-mTOR, and phospho-pS6 levels appear to be significantly lower in OLP compared to OL and OSCC. However, the expression of these molecules in a subset of OLP cases suggests that activation of Akt/mTOR/pS6 may occur in the context of OLP, possibly contributing to the premalignant potential of individual cases.

Vaxchora: A Single-Dose Oral Cholera Vaccine.

Science.gov (United States)

Cabrera, Adriana; Lepage, Jayne E; Sullivan, Karyn M; Seed, Sheila M

2017-07-01

To review trials evaluating the efficacy and safety of Vaxchora, a reformulated, single-dose, oral, lyophilized Vibrio cholerae CVD 103-HgR vaccine for the prevention of travel-related cholera caused by V cholerae serogroup O1. A literature search was conducted using MEDLINE (1946 to January week 3, 2017) and EMBASE (1996 to 2017 week 3). Keywords included oral cholera vaccine, single-dose, Vaxchora, and CVD 103-HgR. Limits included human, clinical trials published in English since 2010. ClinicalTrials.gov was used as a source for unpublished data. Additional data sources were obtained through bibliographic review of selected articles. Studies that addressed the safety and efficacy of Vaxchora, the reformulated, single-dose oral CVD 103-HgR cholera vaccine, were selected for analysis. Approval of Vaxchora, was based on efficacy of the vaccine in human trials demonstrating 90.3% protection among those challenged with V cholerae 10 days after vaccination and in immunogenicity studies with 90% systemic vibriocidal antibody conversion at 6 months after a single-dose of vaccine. Tolerability was acceptable, with the most common adverse effects reported to be fatigue, headache, and abdominal pain. Vaxchora is the only FDA-approved, single-dose oral vaccine for the prevention of cholera caused by V cholerae serogroup O1 in adult travelers from the United States going to cholera-affected areas. Safety and efficacy has not been established in children, immunocompromised persons, and pregnant or breastfeeding women or those living in cholera-endemic areas.

Pharmacokinetics of posaconazole in koalas (Phascolarctos cinereus) after intravenous and oral administration.

Science.gov (United States)

Gharibi, S; Kimble, B; Vogelnest, L; Barnes, J; Stadler, C K; Govendir, M

2017-12-01

The pharmacokinetic profile of posaconazole in clinically normal koalas (n = 8) was investigated. Single doses of posaconazole were administered intravenously (i.v.; 3 mg/kg; n = 2) or orally (p.o.; 6 mg/kg; n = 6) with serial plasma samples collected over 24 and 36 hr, respectively. Plasma concentrations of posaconazole were quantified by validated high-performance liquid chromatography. A noncompartmental pharmacokinetic analysis of data was performed. Following i.v. administration, estimates of the median (range) of plasma clearance (CL) and steady-state volume of distribution (V ss ) were 0.15 (0.13-0.18) L hr -1  kg -1 and 1.23 (0.93-1.53) L/kg, respectively. The median (range) elimination half-life (t 1/2 ) after i.v. and p.o. administration was 7.90 (7.62-8.18) and 12.79 (11.22-16.24) hr, respectively. Oral bioavailability varied from 0.43 to 0.99 (median: 0.66). Following oral administration, maximum plasma concentration (C max ; median: 0.72, range: 0.55-0.93 μg/ml) was achieved in 8 (range 6-12) hr. The in vitro plasma protein binding of posaconazole incubated at 37°C was 99.25 ± 0.29%. Consideration of posaconazole pharmacokinetic/pharmacodynamic (PK/PD) targets for some yeasts such as disseminated candidiasis suggests that posaconazole could be an efficacious treatment for cryptococcosis in koalas. © 2017 John Wiley & Sons Ltd.

Narrow band gap and visible light-driven photocatalysis of V-doped Bi{sub 6}Mo{sub 2}O{sub 15} nanoparticles

Energy Technology Data Exchange (ETDEWEB)

Xu, Jian; Qin, Chuanxiang; Huang, Yanlin [State and Local Joint Engineering Laboratory for Novel Functional Polymeric Materials, College of Chemistry, Chemical Engineering and Materials Science, Soochow University, Suzhou 215123 (China); Wang, Yaorong, E-mail: yrwang@suda.edu.cn [State and Local Joint Engineering Laboratory for Novel Functional Polymeric Materials, College of Chemistry, Chemical Engineering and Materials Science, Soochow University, Suzhou 215123 (China); Qin, Lin [Department of Physics and Interdisciplinary Program of Biomedical, Mechanical & Electrical Engineering, Pukyong National University, Busan 608-737 (Korea, Republic of); Seo, Hyo Jin, E-mail: hjseo@pknu.ac.kr [Department of Physics and Interdisciplinary Program of Biomedical, Mechanical & Electrical Engineering, Pukyong National University, Busan 608-737 (Korea, Republic of)

2017-02-28

Highlights: • V{sup 5+}-doped Bi{sub 6}Mo{sub 2}O{sub 15} was synthesized by the electrospinning preparation. • The band gap energy of Bi{sub 6}Mo{sub 2}O{sub 15} was greatly reduced by V-doping in the lattices. • V-doped Bi{sub 6}Mo{sub 2}O{sub 15} shows high activity in RhB degradation under visible light. • Crystal structure of Bi{sub 6}Mo{sub 2}O{sub 15} is favorable for high photocatalytic capacity. - Abstract: Pure and V{sup 5+}-doped Bi{sub 6}Mo{sub 2}O{sub 15} (3Bi{sub 2}O{sub 3}·2MoO{sub 3}) photocatalysts were synthesized through electrospinning, followed by low-temperature heat treatment. The samples developed into nanoparticles with an average size of approximately 50 nm. The crystalline phases were verified via X-ray powder diffraction measurements (XRD). The surface properties of the photocatalysts were studied by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS) analyses. The UV–vis spectra showed that V doping in Bi{sub 6}Mo{sub 2}O{sub 15} shifted the optical absorption from the UV region to the visible-light wavelength region. The energy of the band gap of Bi{sub 6}Mo{sub 2}O{sub 15} was reduced by V doping in the lattices. The photocatalytic activities of the pure and V-doped Bi{sub 6}Mo{sub 2}O{sub 15} were tested through photodegradation of rhodamine B (RhB) dye solutions under visible light irradiation. Results showed that 20 mol% V-doped Bi{sub 6}Mo{sub 2}O{sub 15} achieved efficient photocatalytic ability. RhB could be degraded by V-doped Bi{sub 6}Mo{sub 2}O{sub 15} in 2 h. The photocatalytic activities and mechanisms were discussed according to the characteristics of the crystal structure and the results of EIS and XPS measurements.

Biodegradable nanoparticles loaded with insulin-phospholipid complex for oral delivery: preparation, in vitro characterization and in vivo evaluation.

Science.gov (United States)

Cui, Fude; Shi, Kai; Zhang, Liqiang; Tao, Anjin; Kawashima, Yoshiaki

2006-08-28

Biodegradable nanoparticles loaded with insulin-phospholipid complex were prepared by a novel reverse micelle-solvent evaporation method, in which soybean phosphatidylcholine (SPC) was employed to improve the liposolubility of insulin, and biodegradable polymers as carrier materials to control drug release. Solubilization study, IR and X-ray diffraction analysis were employed to prove the complex formation. The effects of key parameters such as polymer/SPC weight ratio, organic phase and polymer type on the properties of the nanoparticles were investigated. Spherical particles of 200 nm mean diameter and a narrow size distribution were obtained under optimal conditions. The drug entrapment efficiency was up to 90%. The in vitro drug release was characterized by an initial burst and subsequent delayed release in both pH 6.8 and pH 1.2 dissolution mediums. The specific modality of drug release, i.e., free or SPC-combined, was investigated in the aid of ultracentrifugation and ultrafiltration methods. The influence of polymer type on the drug release was also discussed. The pharmacological effects of the nanoparticles made of PLGA 50/50 (Av.Mw 9500) were further evaluated to confirm their potential suitability for oral delivery. Intragastric administration of the 20 IU/kg nanoparticles reduced fasting plasma glucose levels to 57.4% within the first 8 h of administration and this continued for 12 h. PK/PD analysis indicated that 7.7% of oral bioavailability relative to subcutaneous injection was obtained.

Development of 66 kV/6.9 kV 2 MV A prototype HTS power transformer

International Nuclear Information System (INIS)

Bohno, T.; Tomioka, A.; Imaizumi, M.; Sanuki, Y.; Yamamoto, T.; Yasukawa, Y.; Ono, H.; Yagi, Y.; Iwadate, K.

2005-01-01

We have developed the technology of the producing a HTS magnet for the power transformer. Three subjects have been mainly studied, high voltage technologies, large current and low AC loss technologies and sub-cooling system technologies to establish the technology of 66 kV/6.9 kV 10 MV A class HTS power transformer. In order to verify the validity of elemental technologies, such as high voltage technologies, large current and low AC loss technologies and sub-cooling system technologies, single-phase 2 MV A class 66 kV/6.9 kV prototype HTS transformer was manufactured and tested. In the load loss (AC loss) measurement, it was obtained that the measured value of 633 W was almost corresponding to the calculated value of 576 W at the rated operation of 2 MV A. Moreover, the breakdown was not found all voltage withstand test. These test results indicate that elemental technologies were established for the development of 66 kV/6.9 kV 10 MV A class HTS power transformer

Binuclear complexes of technetium. Evidence for bis(terdentate)bidentate coordination by the bridging ligand 2,3,5,6-tetrakis(2-pyridyl)pyrazine to technetium(V)

International Nuclear Information System (INIS)

Du Preez, J.G.H.; Gerber, T.I.A.; Gibson, M.L.; Geyser, R.

1990-01-01

The authors have used the potentially bis(terdentate) nitrogen aromatic heterocyclic ligand 2,3,5,6-tetrakis(2-pyridyl)pyrazine (tppz) to prepare mono- and bimetallic technetium(V) complexes bound to tppz. The stimulus for the development of the coordination chemistry of the man-made element technetium is provided by the use of complexes of this element as anatomical imaging agents in nuclear medicine. Although the chemistry of technetium(V) with nitrogen donor ligands is well understood, no complexes have been prepared using potentially terdentate neutral nitrogen donor ligands of this metal in the +5 oxidation state

Neutral V production with 14.6 x A GeV/c silicon beams

International Nuclear Information System (INIS)

Eiseman, S.E.; Etkin, A.; Foley, K.J.; Hackenburg, R.W.; Longacre, R.S.; Love, W.A.; Morris, T.W.; Platner, E.D.; Saulys, A.C.; Lindenbaum, S.J.; Chan, C.S.; Kramer, M.A.; Zhao, K.; Hallman, T.J.; Madansky, L.; Bonner, B.E.; Buchanan, J.A.; Chiou, C.N.; Clement, J.M.; Corcoran, M.D.; Kruk, J.W.; Mutchler, G.S.; Nessi-Tedaldi, F.; Nessi, M.; Roberts, J.B.

1990-01-01

We present the results of a measurement of neutral V production with 14.6xA GeV/c Si beams on Au and Cu targets. The Λ and K s 0 yields were measured as a function of negative particle multiplicity. Effective temperatures were determined from an exponential fit to the transverse mass distributions. (orig.)

Surface modification of solid lipid nanoparticles for oral delivery of curcumin: Improvement of bioavailability through enhanced cellular uptake, and lymphatic uptake.

Science.gov (United States)

Baek, Jong-Suep; Cho, Cheong-Weon

2017-08-01

Curcumin has been reported to exhibit potent anticancer effects. However, poor solubility, bioavailability and stability of curcumin limit its in vivo efficacy for the cancer treatment. Solid lipid nanoparticles (SLN) are a promising delivery system for the enhancement of bioavailability of hydrophobic drugs. However, burst release of drug from SLN in acidic environment limits its usage as oral delivery system. Hence, we prepared N-carboxymethyl chitosan (NCC) coated curcumin-loaded SLN (NCC-SLN) to inhibit the rapid release of curcumin in acidic environment and enhance the bioavailability. The NCC-SLN exhibited suppressed burst release in simulated gastric fluid while sustained release was observed in simulated intestinal fluid. Furthermore, NCC-SLN exhibited increased cytotoxicity and cellular uptake on MCF-7 cells. The lymphatic uptake and oral bioavailability of NCC-SLN were found to be 6.3-fold and 9.5-fold higher than that of curcumin solution, respectively. These results suggest that NCC-SLN could be an efficient oral delivery system for curcumin. Copyright © 2017 Elsevier B.V. All rights reserved.

Biocorrosion of TiO2 nanoparticle coating of Ti-6Al-4V in DMEM under specific in vitro conditions

Science.gov (United States)

Höhn, Sarah; Virtanen, Sannakaisa

2015-02-01

A TiO2 nanoparticle coating was prepared on a biomedical Ti-6Al-4V alloy using "spin-coating" technique with a colloidal suspension of TiO2 nanopowders with the aim to optimize the surface morphology (e.g., roughness) for improved biocompatibility. The influence of a TiO2 nanoparticle (NP) coating on the corrosion behavior, metal ion release, and biomimetic apatite formation was studied in DMEM, at 37.5 °C with a continuous supply of 5% CO2. Electrochemical impedance spectroscopy measurements indicate a formation of a new layer on the surface of the NP-coated sample upon 28 days immersion in DMEM. Scanning electron microscopy (SEM) and X-ray spectroscopy confirm that the surface of the NP-coated Ti-6Al-4V shows a complete coverage by a Ca-phosphate layer in contrast to the non-coated Ti-6Al-4V alloy. Hence, the TiO2-NP coating strongly enhances biomimetic apatite formation on the alloy surface. In addition, the TiO2-NP coating can efficiently reduce Al-release from the alloy, for which the bare Ti-6Al-4V alloy is significant for at least 28 days of immersion in DMEM.

Conceptual design of the Argonne 6-GeV synchrotron light source

International Nuclear Information System (INIS)

Cho, Y.; Crosbie, E.; Khoe, T.

1985-01-01

The Argonne National Laboratory Synchrotron Light Source Storage Ring is designed to have a natural emittance of 6.5 X 10 -9 m for circulating 6-GeV positrons. Thirty of the 32 long straight sections, each 6.5-m long, will be available for synchrotron light insertion devices. A circulating positron current of 300 mA can be injected in about 8 min. from a booster synchrotron operating with a repetition time of 1.2 sec. The booster synchrotron will contain two different rf systems. The lower frequency system (38.97 MHz) will accept positrons from a 360-MeV linac and will accelerate them to 2.25 GeV. The higher frequency system (350.76 MHz) will accelerate the positrons to 6 GeV. The positrons will be produced from a 300-MeV electron beam on a tungsten target

Mangiferin inhibits lipopolysaccharide-induced production of interleukin-6 in human oral epithelial cells by suppressing toll-like receptor signaling.

Science.gov (United States)

Li, Hao; Wang, Qi; Chen, Xinmin; Ding, Yi; Li, Wei

2016-11-01

Oral epithelial cells have currently been found to play an important role in inflammatory modulation in periodontitis. Mangiferin is a natural glucosylxanthone with anti-inflammatory activity. The aim of this study was to investigate the regulatory effect of mangiferin on lipopolysaccharide (LPS)-induced production of proinflammatory cytokine interleukin-6 (IL-6) in oral epithelial cells and the underlying mechanisms. The levels of LPS-induced IL-6 production in OKF6/TERT-2 oral keratinocytes were detected using enzyme-linked immunosorbent assay (ELISA). The expression of Toll-like receptor (TLR) 2 and TLR4 was determined using western blot analysis. And the phosphorylation of TLR downstream nuclear factor-κB (NF-κB), p38 mitogen-activated protein kinase (p38 MAPK) and c-Jun N-terminal kinase (JNK) was examined using cell-based protein phosphorylation ELISA kits. We found that mangiferin reduced LPS-upregulated IL-6 production in OKF6/TERT-2 cells. Additionally, mangiferin inhibited LPS-induced TLR2 and TLR4 overexpression, and suppressed the phosphorylation of NF-κB, p38 MAPK and JNK. Moreover, mangiferin repressed IL-6 production and TLR signaling activation in a dose-dependent manner after 24h treatment. Mangiferin decreases LPS-induced production of IL-6 in human oral epithelial cells by suppressing TLR signaling, and this glucosylxanthone may have potential for the treatment of periodontitis. Copyright © 2016 Elsevier Ltd. All rights reserved.

The preparation and properties of a novel electrolyte of electrochemical double layer capacitors based on LiPF6 and acetamide

International Nuclear Information System (INIS)

Li Qi; Zuo Xiaoxi; Liu Jiansheng; Xiao Xin; Shu Dong; Nan Junmin

2011-01-01

A novel electrolyte applied in electrochemical double-layer capacitors (EDLCs) has been prepared based on lithium hexafluorophosphate (LiPF 6 ) and acetamide and subsequently characterized by differential scanning calorimetry (DSC), thermal gravimetric analysis (TGA), electrochemical techniques and so on. The mixtures of LiPF 6 and acetamide at the molar ratios of 1:4 to 1:6 exist as liquids below 25 °C, which is attributed to the melting point depression of mixture and the coordination of the polar groups (C=O and NH groups) of acetamide with Li + and PF 6 − ions. The strong interaction between LiPF 6 and acetamide results in the rupture of the electrovalent bond of LiPF 6 and the breakage of hydrogen bonds among the acetamide molecules, leading to the formation of a liquid electrolyte. The LiPF 6 /acetamide electrolyte with a molar ratio of 1:5.5 exhibits a 5.2 V electrochemical window and suitable ionic conductivity at room temperature. In particular, the coin-type cells with carbon electrodes and LiPF 6 /acetamide electrolyte possess high thermal stability and electrochemical properties, showing that the as-prepared LiPF 6 /acetamide electrolyte is a promising candidate for EDLCs.

Nanosuspensions of 10-hydroxycamptothecin that can maintain high and extended supersaturation to enhance oral absorption: preparation, characterization and in vitro/in vivo evaluation

Energy Technology Data Exchange (ETDEWEB)

Pu, Xiaohui; Sun, Jin, E-mail: sunjin66@21cn.com [Shenyang Pharmaceutical University, Department of Biopharmaceutics, School of Pharmacy (China); Han, Jihong [Keele University, School of Pharmacy and Institute for Science and Technology in Medicine (United Kingdom); Lian, He; Zhang, Peng [Shenyang Pharmaceutical University, Department of Biopharmaceutics, School of Pharmacy (China); Yan, Zhongtian [Nantion Institutes for Food and Drug Control (China); He, Zhonggui, E-mail: hezhgui_student@yahoo.com.cn [Shenyang Pharmaceutical University, Department of Biopharmaceutics, School of Pharmacy (China)

2013-11-15

The purpose of the study was to prepare and characterize nanosuspensions that can maintain high and extended supersaturation to improve the dissolution and absorption of poorly soluble 10-hydroxycamptothecin (10-HCPT). 10-HCPT oral nanosuspensions (HCPT-Nanosuspensions) were produced on a laboratory-scale by microprecipitation- high pressure homogenization method. The particle morphology and the physical state were studied using transmission electron microscopy, X-ray powder diffraction (XRPD), and differential scanning calorimetry (DSC). Supersaturated dissolution tests were carried out with the paddle method. Caco-2 cell experiments were performed to imitate the oral absorption. The in vivo pharmacokinetics studies were undertaken in rats following oral administration. The 10-HCPT nanoparticles were 135 nm in dimension before lyophilization and were claviform or lump in shape. XRPD and DSC both confirmed that a portion of 10-HCPT was present in a crystalline state in nanosuspension. Supersaturated dissolution tests showed HCPT-Nanosuspensions could maintain high supersaturated level for an extended period time. The cell experiment on HCPT-Nanosuspensions showed a significantly higher uptake and greater membrane permeability compared with the other formulations. The pharmacokinetic test exhibited HCPT-Nanosuspensions had a similar pharmacokinetic performance with 10-HCPT solution. In conclusion, highly and extendedly supersaturated HCPT-Nanosuspensions have been prepared which could result in high peak concentration (C{sub max}) and great exposure (AUC) after oral administration.

Design of a formulation for the preparation of {sup 99m} Tc-(V)-Dmsa and {sup 186} Re-(V)-Dmsa; Diseno de una formulacion para la obtencion de {sup 99m} Tc-(V)-DMSA y {sup 186} Re-(V)-DMSA

Energy Technology Data Exchange (ETDEWEB)

Marquez L, M B [Universidad Autonoma del Estado de Mexico. Facultad de Quimica. Toluca (Mexico)

1998-06-01

Among the radiopharmaceuticals used for neoplasia, we can find the dimercaptosuccinic acid (Dmsa) labelled with {sup 99m} Tc and {sup 186/188} Re. Initially, the {sup 99m} Tc-(III)-Dmsa was employed as a renal image agent. Nevertheless, when it is prepared into a basic solution, the {sup 99m} Tc-(V)-Dmsa complex is produced in high yield being cumulated by cells with a great metabolic activity. This property makes it a useful radiopharmaceutical for the detection of medullary thyroid carcinoma (MTC), soft-tissue tumors and other head and neck tumors. On the other hand, the renewed interest in {beta} - emitting radionuclides, suggests that the {sup 186} Re-(V)-Dmsa complex could be used as antineoplastic agent in therapy. However, the techniques reported for the preparation of these compounds lack of stability studies and they are still in process of investigation, compromising to continue on the development of the radiopharmaceuticals by introducing new possibilities for better products already known, obtaining in this way, the approximation to the ideal radiopharmaceutical. The objective of this work is to design a freeze dried kit formulation for the instant preparation of {sup 99m} Tc-(V)-Dmsa and {sup 186} Re-(V)-Dmsa complexes useful in the diagnostic and therapy of soft-tissue tumors and other head and neck tumors. We obtained a freeze dried stable formulation for the preparation of {sup 99m} Tc-(V)-Dmsa kit with a radiochemical purity higher than 90 %, which fulfills with the quality control of radiopharmaceuticals. Furthermore, we developed analytical techniques for the determination of the different chemical compounds into the lyophilized kit. On the other hand, we obtained the optimum conditions for preparation of {sup 186} Re-(V)-Dmsa complex in high radiochemical yields (>90%). (Author).

Preparation and characterization of multi-walled carbon nanotube/hydroxyapatite nanocomposite film dip coated on Ti–6Al–4V by sol–gel method for biomedical applications: An in vitro study

International Nuclear Information System (INIS)

Abrishamchian, Alireza; Hooshmand, Tabassom; Mohammadi, Mohammadreza; Najafi, Farhood

2013-01-01

In the present research, the introduction of multi-walled carbon nanotubes (MWCNTs) into the hydroxyapatite (HA) matrix and dip coating of nanocomposite on titanium alloy (Ti–6Al–4V) plate was conducted in order to improve the performance of the HA-coated implant via the sol–gel method. The structural characterization and electron microscopy results confirmed well crystallized HA–MWCNT coating and homogenous dispersion of carbon nanotubes in the ceramic matrix at temperatures as low as 500 °C. The evaluation of the mechanical properties of HA and HA/MWCNT composite coatings with different weight percentages of MWCNTs showed that the addition of low concentrations of MWCNTs (0.5 and 1 wt.%) had improved effect on the mechanical properties of nanocomposite coatings. Moreover, this in vitro study ascertained the biocompatibility of the prepared sol–gel-derived HA/MWCNT composite coatings. - Highlights: ► Carbon nanotube/hydroxyapatite composite was successfully dip-coated on Ti by sol–gel. ► Well-crystallized HA–MWCNT and homogenous dispersion of nanotubes were obtained. ► Low concentration of CNTs improved the mechanical properties of composite coating. ► Biocompatibility of the prepared sol–gel-derived HA/MWCNT films was ascertained

Preparation and characterization of multi-walled carbon nanotube/hydroxyapatite nanocomposite film dip coated on Ti–6Al–4V by sol–gel method for biomedical applications: An in vitro study

Energy Technology Data Exchange (ETDEWEB)

Abrishamchian, Alireza [Department of Dental Biomaterials, School of Dentistry/Research Center for Science and Technology in Medicine, Tehran University of Medical Sciences, Tehran (Iran, Islamic Republic of); Hooshmand, Tabassom, E-mail: hoshmand@sina.tums.ac.ir [Department of Dental Biomaterials, School of Dentistry/Research Center for Science and Technology in Medicine, Tehran University of Medical Sciences, Tehran (Iran, Islamic Republic of); Mohammadi, Mohammadreza [Department of Materials Science and Engineering, Sharif University of Technology, Tehran (Iran, Islamic Republic of); Najafi, Farhood [Department of Resin and Additives, Institute for Color Science and Technology, Tehran (Iran, Islamic Republic of)

2013-05-01

In the present research, the introduction of multi-walled carbon nanotubes (MWCNTs) into the hydroxyapatite (HA) matrix and dip coating of nanocomposite on titanium alloy (Ti–6Al–4V) plate was conducted in order to improve the performance of the HA-coated implant via the sol–gel method. The structural characterization and electron microscopy results confirmed well crystallized HA–MWCNT coating and homogenous dispersion of carbon nanotubes in the ceramic matrix at temperatures as low as 500 °C. The evaluation of the mechanical properties of HA and HA/MWCNT composite coatings with different weight percentages of MWCNTs showed that the addition of low concentrations of MWCNTs (0.5 and 1 wt.%) had improved effect on the mechanical properties of nanocomposite coatings. Moreover, this in vitro study ascertained the biocompatibility of the prepared sol–gel-derived HA/MWCNT composite coatings. - Highlights: ► Carbon nanotube/hydroxyapatite composite was successfully dip-coated on Ti by sol–gel. ► Well-crystallized HA–MWCNT and homogenous dispersion of nanotubes were obtained. ► Low concentration of CNTs improved the mechanical properties of composite coating. ► Biocompatibility of the prepared sol–gel-derived HA/MWCNT films was ascertained.

Comparison of three sampling instruments, Cytobrush, Curette and OralCDx, for liquid-based cytology of the oral mucosa.

Science.gov (United States)

Reboiras-López, M D; Pérez-Sayáns, M; Somoza-Martín, J M; Antúnez-López, J R; Gándara-Vila, P; Gayoso-Diz, P; Gándara-Rey, J M; García-García, A

2012-01-01

Exfoliative cytology of the oral cavity is a simple and noninvasive technique that permits the study of epithelial cells. Liquid-based cytology is an auxiliary diagnostic tool for improving the specificity and sensitivity of conventional cytology. The objective of our study was to compare the quality of normal oral mucosa cytology samples obtained using three different instruments, Cytobrush®, dermatological curette and Oral CDx® for liquid-based cytology. One hundred four cytological samples of oral cavity were analyzed. Samples were obtained from healthy volunteer subjects using all three instruments. The clinical and demographic variables were age, sex and smoking habits. We analyzed cellularity, quality of the preparation and types of cells in the samples. All preparations showed appropriate preparation quality. In all smears analyzed, cells were distributed uniformly and showed no mucus, bleeding, inflammatory exudate or artifacts. We found no correlation between the average number of cells and the type of instrument. The samples generally consisted of two types of cells: superficial and intermediate. No differences were found among the cytological preparations of these three instruments. We did not observe basal cells in any of the samples analyzed.

Energy distributions study of spallation neutrons produced at 0 deg. by proton beams (0.8 GeV and 1.6 GeV) and deuteron beams (1.2 and 1.6 GeV)

International Nuclear Information System (INIS)

Martinez, Eugenie

1997-01-01

We are studying the energy distributions of spallation neutrons produced at 0 deg. by protons of 0.8 GeV up to 1.6 GeV and deuterons of 1.2 and 1.6 GeV with two complementary experimental techniques: the time of flight measurement with tagged incident protons for low energy neutrons (3-400 MeV) and the use of a magnetic spectrometer at high energy (E ≥ 200 MeV). These measurements enable us to measure for the first time the neutron spectra for incident energies higher than 800 MeV. We have compared the double differential cross sections produced with 1.2 GeV protons on several thin targets (Al, Fe, Zr, W, Pb and Th). The neutron production obtained for a lead target is also studied for various energies (0.8 up to 1.6 GeV) and incident particles (p, d). Data are compared with theoretical simulations carried out using the TIERCE system and the intranuclear cascade model of J. Cugnon associated to the decay code of D. Durand. The neutron spectra calculated by using the HETC and MCNP codes, included in TIERCE, are significantly higher than the measured distributions. A better agreement is observed with the results of the Cugnon's cascade model. (author) [fr

Conceptual design of the Argonne 6-GeV synchrotron light source

International Nuclear Information System (INIS)

Cho, Y.; Crosbie, E.; Khoe, T.

1985-01-01

The Argonne National Laboratory Synchrotron Light Source Storage Ring is designed to have a natural emittance of 6.5 x 10 -9 m for circulating 6-GeV positrons. Thirty of the 32 long straight sections, each 6.5-m long, will be available for synchrotron light insertion devices. A circulating positron current of 300 mA can be injected in about 8 min. from a booster synchrotron operating with a repetition time of 1.2 sec. The booster synchrotron will contain two different RF systems. The lower frequency system (38.97 MHz) will accept positrons from a 360-MeV linac and will accelerate them to 2.25 GeV. The higher frequency system (350.76 MHz) will accelerate the positrons to 6 GeV. The positrons will be produced from a 300-MeV electron beam on a tungsten target. A conceptual layout is shown

A solid phospholipid-bile salts-mixed micelles based on the fast dissolving oral films to improve the oral bioavailability of poorly water-soluble drugs

Science.gov (United States)

Lv, Qing-yuan; Li, Xian-yi; Shen, Bao-de; Dai, Ling; Xu, He; Shen, Cheng-ying; Yuan, Hai-long; Han, Jin

2014-06-01

The phospholipid-bile salts-mixed micelles (PL-BS-MMs) are potent carriers used for oral absorption of drugs that are poorly soluble in water; however, there are many limitations associated with liquid formulations. In the current study, the feasibility of preparing the fast dissolving oral films (FDOFs) containing PL-BS-MMs was examined. FDOFs incorporated with Cucurbitacin B (Cu B)-loaded PL-sodium deoxycholate (SDC)-MMs have been developed and characterized. To prepare the MMs and to serve as the micellar carrier, a weight ratio of 1:0.8 and total concentration of 54 mg/mL was selected for the PL/SDC based on the size, size distribution, zeta potential, encapsulation efficiency, and morphology. The concentration of Cu B was determined to be 5 mg/mL. Results showed that a narrow size distributed nanomicelles with a mean particle size of 86.21 ± 6.11 nm and a zeta potential of -31.21 ± 1.17 mV was obtained in our optimized Cu B-PL/SDC-MMs formulation. FDOFs were produced by solvent casting method and the formulation with 50 mg/mL of pullulan and 40 mg/mL of PEG 400 were deemed based on the physico-mechanical properties. The FDOFs containing Cu B-PL/SDC-MMs were easily reconstituted in a transparent and clear solution giving back a colloidal system with spherical micelles in the submicron range. In the in vitro dissolution test, the FDOFs containing Cu B-PL/SDC-MMs showed an increased dissolution velocity markedly. The pharmacokinetics study showed that the FDOFs containing PL-SDC-MMs not only kept the absorption properties as same as the PL-SDC-MMs, but also significantly increased the oral bioavailability of Cu B compared to the Cu B suspension ( p < 0.05). This study showed that the FDOFs containing Cu B-PL/SDC-MMs could represent a novel platform for the delivery of poorly water-soluble drugs via oral administration. Furthermore, the integration with the FDOFs could also provide a simple and cost-effective manner for the solidification of PL-SDC-MMs.

Microstructure and erosive wear behaviors of Ti6Al4V alloy treated by plasma Ni alloying

Energy Technology Data Exchange (ETDEWEB)

Wang, Z.X.; Wu, H.R.; Shan, X.L.; Lin, N.M.; He, Z.Y., E-mail: tyuthzy@126.com; Liu, X.P.

2016-12-01

Graphical abstract: The Ni modified layers were prepared on the surface of Ti6Al4V substrate by the plasma surface alloying technique. The surface and cross-section morphology, element concentration and phase composition were investigated by thermal field emission scanning electron microscopy (SEM), and glow discharge optical emission spectroscopy (GDOES), X-ray diffraction (XRD), respectively. The cross-section nano-scale hardness of Ni modified layer was measured by nano indenter. The results showed that Ni modified layers exhibited triple layers structure and continuous gradient distribution of the concentration. From the surface to the matrix, they were 2 μm Ni deposition layer, 8 μm Ni-rich alloying layer including the phases of Ni{sub 3}Ti, NiTi, Ti{sub 2}Ni, AlNi{sub 3} and 24 μm Ni-poor alloying layer forming the solid solution of nickel. With increasing of the thickness of Ni modified layer, the microhardness increased first, reached the climax, then gradient decreased. The erosion tests were performed on the surface of the untreated and treated Ti6Al4V sample using MSE (Micro-slurry-jet Erosion) method. The experiment results showed that the wear rate of every layer showed different value, and the Ni-rich alloying layer was the lowest. The strengthening mechanism of Ni modified layer was also discussed. - Highlights: • The Ni modified layers were prepared by the plasma surface alloying technique. • Triple layers structure was prepared. • Using Micro-slurry-jet Erosion method. • The erosion rate of Ni modified layer experienced the process of descending first and then ascending. • Improvement of erosion resistance performance of Ni-rich alloying layer was prominent. The wear mechanism of Ni modified layer showed micro-cutting wearing. - Abstract: The Ni modified layers were prepared on the surface of Ti6Al4V substrate by the plasma surface alloying technique. The surface and cross-section morphology, element concentration and phase composition

Urban outbreak of acute orally acquired Chagas disease in Táchira, Venezuela

OpenAIRE

Benítez, Jesús A.; Araujo, Benjamín; Contreras, Krisell; Rivas, Marianela; Ramírez, Pedro; Guerra, Watermo; Calderón, Noél; Terren, Carlo Ascaso; Barrera, Reggie; Rodríguez Morales, Alfonso Javier

2013-01-01

Aguda por vía oral adquirió la enfermedad de Chagas (AOACD) se ha convertido en una amenaza importante en algunos países de América del Sur [1,2]. Hasta marzo de 2013, al menos cuatro han reportado brotes de la enfermedad de Chagas aguda adquirida por vía oral, en concreto Brasil [3], Venezuela [4], Colombia [5] y Bolivia [6]. Los brotes también se están produciendo probablemente en Argentina y Ecuador, según algunos informes antiguos [2]. En Venezuela, ha habido por lo menos tres informes ep...

28-Day oral (gavage) toxicity studies of green tea catechins prepared for beverages in rats.

Science.gov (United States)

Chengelis, Christopher P; Kirkpatrick, Jeannie B; Regan, Karen S; Radovsky, Ann E; Beck, Melissa J; Morita, Osamu; Tamaki, Yasushi; Suzuki, Hiroyuki

2008-03-01

The beneficial health effects associated with drinking green tea are widely considered to be due primarily to tea catechins. Heat treatment of marketed green tea beverages for sterilization causes epimerization and/or polymerization of tea catechins. Safety studies on heat-treated tea catechins are limited. The objective of the present study was to evaluate potential adverse effects, if any, of two standardized green tea catechin (GTC) preparations: one that underwent heat sterilization (GTC-H) and one that was not heat-sterilized (GTC-UH). A decaffeinated preparation of the GTC-H (GTC-HDC) was also evaluated to ascertain if any effects were due to caffeine. The GTC preparations were administered to rats once daily at levels up to 2000 mg/kg/day for 28 days. There were no deaths attributable to the GTC preparations. The clinical condition of the animals, functional observational battery, motor activity, clinical pathology evaluations, organ weights, and gross necropsy findings were unaffected by any of the GTC preparations. GTC-HDC or GTC-UH dosing had no effects on body weights or microscopic findings, whereas lower body weights and food consumption were observed in the 1000 and 2000 mg/kg/day GTC-H group males. The no observed-adverse-effect level (NOAEL) for localized gastric effects for GTC-H was 1000 mg/kg/day. No other target organs were identified. Thus, the NOAEL for systemic toxicity following oral administration was 2000 mg/kg/day for GTC-H, GTC HDC, and GTC-UH under the conditions of this study.

Localization of integrin alpha(v)beta3 and vascular endothelial growth factor receptor-2 (KDR/Flk-1) in cutaneous and oral melanomas of dog.

Science.gov (United States)

Rawlings, N G; Simko, E; Bebchuk, T; Caldwell, S J; Singh, B

2003-07-01

Melanomas are common neoplasms of dogs and arise from pigment-producing cells called melanocytes or melanoblasts. Melanomas of skin are often easily cured by surgical excision, but those of oral mucosa are aggressive, metastasize to the regional lymph nodes and lungs, and respond poorly to conventional therapy. Tumor growth is sustained by proliferation of microvessels via a process called angiogenesis. Integrin alpha(v)beta3 is expressed in proliferating but not in quiescent microvessels suggesting a role in angiogenesis. Vascular endothelial growth factor (VEGF) manifests its mitogenic and angiogenic effects mainly via VEGF receptor-2 (VEGFR-2/Flk-1). We conducted this immunocytochemical study to investigate the expression of integrin alpha(v)beta3 and VEGFR-2 in archival and fresh samples from cases of canine melanomas. Results show that integrin alpha(v)beta3 was expressed in 72% and 88% of cutaneous and oral melanomas, respectively, and the expression was restricted to and immediately around the melanocytes and endothelial cells. VEGFR-2 staining of selected cases of melanoma revealed that its expression overlapped with the alpha(v)beta3 integrin. Dual immuno-gold electron microscopy confirmed co-localization of integrin alpha(v)beta3 and VEGFR-2 in melanocytes and endothelial cells. These data demonstrate expression and co-localization of integrin alpha(v)beta3 and VEGFR-2 in cutaneous and oral melanomas of dogs.

pH-sensitive chitosan/alginate core-shell nanoparticles for efficient and safe oral insulin delivery.

Science.gov (United States)

Mukhopadhyay, Piyasi; Chakraborty, Souma; Bhattacharya, Sourav; Mishra, Roshnara; Kundu, P P

2015-01-01

Chitosan-alginate (CS/ALG) nanoparticles were prepared by formation of an ionotropic pre-gelation of an alginate (ALG) core entrapping insulin, followed by chitosan (CS) polyelectrolyte complexation, for successful oral insulin administration. Mild preparation process without harsh chemicals is aimed at improving insulin bio-efficiency in in vivo model. The nanoparticles showed an average particle size of 100-200 nm in dynamic light scattering (DLS), with almost spherical or sub-spherical shape and ∼ 85% of insulin encapsulation. Again, retention of almost entire amount of encapsulated insulin in simulated gastric buffer followed by its sustained release in simulated intestinal condition proved its pH sensitivity in in vitro release studies. Significant hypoglycemic effects with improved insulin-relative bioavailability (∼ 8.11%) in in vivo model revealed the efficacy of these core-shell nanoparticles of CS/ALG as an oral insulin carrier. No systemic toxicity was found after its peroral treatment, suggesting these core-shell nanoparticles as a promising device for potential oral insulin delivery. Copyright © 2014 Elsevier B.V. All rights reserved.

Electrochemical properties of opal-V6O13 composites

International Nuclear Information System (INIS)

Vernardou, D.; Apostolopoulou, M.; Louloudakis, D.; Spanakis, E.; Katsarakis, N.; Koudoumas, E.; McGrath, J.; Pemble, M.E.

2014-01-01

Highlights: • Opal-V 6 O 13 composites grown at 95 °C for 50 h. • The deposition period affects the void filling of the opals. • The electrochemical performance is correlated with the oxide’s characteristics. -- Abstract: Vanadium oxides were hydrothermally grown on opal glass substrates at 95 °C. The deposition period was observed to affect the structure of the oxides and the voids filling of the opal surfaces. V 6 O 13 grown on opal for 50 h presented satisfactory electrochemical performance and electrochromic response with a contrast ratio of 2. The specific capacitance of this composite reached a value of 192 F g −1 , which was stable up to 500 continuous charge intercalation/deintercalation scans. The importance of achieving crystalline V 6 O 13 and high opal surface coverage towards the enhancement of the electrochemical properties is presented

Raman spectroscopy of few-layer graphene prepared by C2–C6 cluster ion implantation

International Nuclear Information System (INIS)

Wang, Z.S.; Zhang, R.; Zhang, Z.D.; Huang, Z.H.; Liu, C.S.; Fu, D.J.; Liu, J.R.

2013-01-01

Few-layer graphene has been prepared on 300 nm-thick Ni films by C 2 –C 6 cluster ion implantation at 20 keV/cluster. Raman spectroscopy reveals significant influence of the number of atoms in the cluster, the implantation dose, and thermal treatment on the structure of the graphene layers. In particular, the graphene samples exhibit a sharp G peak at 1584 cm −1 and 2D peaks at 2711–2717 cm −1 . The I G /I 2D ratios higher than 1.70 and I G /I D ratio as high as 1.95 confirm that graphene sheets with low density of defects have been synthesized with much improved quality by ion implantation with larger clusters of C 4 –C 6

Curcumin modulates cellular AP-1, NF-kB, and HPV16 E6 proteins in oral cancer.

Science.gov (United States)

Mishra, Alok; Kumar, Rakesh; Tyagi, Abhishek; Kohaar, Indu; Hedau, Suresh; Bharti, Alok C; Sarker, Subhodeep; Dey, Dipankar; Saluja, Daman; Das, Bhudev

2015-01-01

In this study, we investigated the effects of the natural antioxidant curcumin on the HPV16-positive oral carcinoma cell line 93VU147T and demonstrated that curcumin is not only a potent inhibitor for the activity of host nuclear transcription factors AP-1 and NF-kB but it also selectively suppresses transcription of the HPV16/E6 oncogene during the carcinogenic process in oral cancer cells. This study suggests a therapeutic potential of curcumin for high-risk human papilloma virus (HPV)-infected oral cancers.

Oral complications of cancer therapies. Oral complications in the pediatric population

International Nuclear Information System (INIS)

Leggott, P.J.

1990-01-01

A number of acute oral complications may be associated with cancer therapy in children, but the extent and duration of these complications, and the most effective management techniques. have not been well described. The few studies differ in design, making comparisons difficult. Well-controlled, prospective clinical studies are needed to define the most effective strategies for the management of acute oral complications in children. However, it is clear that dental intervention prior to cancer therapy is an important factor in the optimal preparation of the patient. During cancer therapy, intensive supervised oral preventive protocols appear to be of benefit to the child's oral health, overall comfort, and well-being. Furthermore, the prevention of oral infection may significantly reduce the morbidity associated with cancer therapy. Long-term preventive oral care may help prevent dental disease and infection in medically compromised children and contribute to improving the quality of life. 41 references

Osteoblast Cell Response on the Ti6Al4V Alloy Heat-Treated

Directory of Open Access Journals (Sweden)

Mercedes Paulina Chávez-Díaz

2017-04-01

Full Text Available In an effort to examine the effect of the microstructural changes of the Ti6Al4V alloy, two heat treatments were carried out below (Ti6Al4V800 and above (Ti6Al4V1050 its β-phase transformation temperature. After each treatment, globular and lamellar microstructures were obtained. Saos-2 pre-osteoblast human osteosarcoma cells were seeded onto Ti6Al4V alloy disks and immersed in cell culture for 7 days. Electrochemical assays in situ were performed using OCP and EIS measurements. Impedance data show a passive behavior for the three Ti6Al4V alloys; additionally, enhanced impedance values were recorded for Ti6Al4V800 and Ti6Al4V1050 alloys. This passive behavior in culture medium is mostly due to the formation of TiO2 during their sterilization. Biocompatibility and cell adhesion were characterized using the SEM technique; Ti6Al4V as received and Ti6Al4V800 alloys exhibited polygonal and elongated morphology, whereas Ti6Al4V1050 alloy displayed a spherical morphology. Ti and O elements were identified by EDX analysis due to the TiO2 and signals of C, N and O, related to the formation of organic compounds from extracellular matrix. These results suggest that cell adhesion is more likely to occur on TiO2 formed in discrete α-phase regions (hcp depending on its microstructure (grains.

Educational intervention about oral piercing knowledge among dental students and adolescents at schools.

Science.gov (United States)

Junco, Pilar; Barrios, Rocío; Ruiz, María José; Bravo, Manuel

2017-10-01

Oral piercing can lead to complications and dentists are in a unique position to detect such complications. The purpose of this study was: (i) to assess the immediate and the long-term effects, on dental students, of a training programme about oral piercing knowledge; and (ii) to assess the immediate effect, on adolescents, of a single educational intervention session about oral piercing. A training programme for dental students (n = 66) was carried out in three phases. The last phase consisted of preparing and giving talks about oral piercing at schools, which was delivered by a random selection of dental students involved in the training programme. Dental students answered a questionnaire about oral piercing knowledge, before, immediately after (only the dental students included in the last phase) and 12 months after the training programme. Adolescents (n = 347) answered a survey about oral piercing knowledge before and after the talks. There were statistically significant differences in all comparison groups, except for the results in the 'before intervention' and in the '12 months after intervention' groups among dental students who had not prepared and given the talks to adolescents. Knowledge about oral piercing significantly improved among adolescents when comparing results before (mean questionnaire score = 3.0) and after (mean questionnaire score = 6.2) the talks. Oral piercing educational intervention had a favourable impact on adolescents and dental students, particularly among those who were more involved in the learning process. © 2017 FDI World Dental Federation.

Synthesis of 14C- and 2H-labeled 1,3 dihydro-3, 3-dimethyl-5-(1,4,5,6,- tetrahydro-6-oxo-3-pyridazinyl)-2H-indol-2-one (LY195115), an orally effective positive inotrope

International Nuclear Information System (INIS)

Robertson, D.W.; Krushinski, J.H.; Kau, D.

1986-01-01

The synthesis of 14 C- and 2 H-labeled 1,3-dihydro-3,3-dimethyl-5-(1,4,5,6-tetrahydro-6-oxo-3-pyridazinyl)-2H-indol -2-one (LY195115), an extremely potent, orally-effective cardiotonic with inotropic and vasodilator activities is described. The 14 C-label was introduced in the antepenultimate step by reaction of a β-chloroketone precursor with Na 14 CN; acid-catalyzed hydrolysis and cyclization with hydrazine provided the tetrahydropyridazinone bearing the 14 C-label in the oxo-carbon. 1,3-Dihydro-3,3-di(methyl-d 3 ) -2H-indol-2-one was prepared by exhaustive methylation of 1-acetyl-1,3-dihydro-2H-indol-2-one with sodium hydride and iodomethane-d 3 , followed by removal of the nitrogen protecting group. This labeled material was converted in two steps to [ 2 H 6 ]-LY195115. (author)

Mechanical behavior and modelisation of Ti-6Al-4V titanium sheet under hot stamping conditions

Science.gov (United States)

Sirvin, Q.; Velay, V.; Bonnaire, R.; Penazzi, L.

2017-10-01

The Ti-6Al-4V titanium alloy is widely used for the manufacture of aeronautical and automotive parts (solid parts). In aeronautics, this alloy is employed for its excellent mechanical behavior associated with low density, outstanding corrosion resistance and good mechanical properties up to 600°C. It is especially used for the manufacture of fuselage frames, on the pylon for carrying out the primary structure (machining forged blocks) and the secondary structure in sheet form. In this last case, the sheet metal forming can be done through various methods: at room temperature by drawing operation, at very high temperature (≃900°C) by superplastic forming (SPF) and at intermediate temperature (≥750°C) by hot forming (HF). In order to reduce production costs and environmental troubles, the cycle times reduction associated with a decrease of temperature levels are relevant. This study focuses on the behavior modelling of Ti-6Al-4V alloy at temperatures above room temperature to obtained greater formability and below SPF condition to reduce tools workshop and energy costs. The displacement field measurement obtained by Digital Image Correlation (DIC) is based on innovative surface preparation pattern adapted to high temperature exposures. Different material parameters are identified to define a model able to predict the mechanical behavior of Ti-6Al-4V alloy under hot stamping conditions. The hardening plastic model identified is introduced in FEM to simulate an omega shape forming operation.

Experimental investigation and oral bioavailability enhancement of nano-sized curcumin by using supercritical anti-solvent process.

Science.gov (United States)

Anwar, Mohammed; Ahmad, Iqbal; Warsi, Musarrat H; Mohapatra, Sharmistha; Ahmad, Niyaz; Akhter, Sohail; Ali, Asgar; Ahmad, Farhan J

2015-10-01

The biomedical applications of curcumin (CUR) are limited due to its poor oral bioavailability. In this work, CUR nanoparticles were successfully prepared by combining the supercritical anti-solvent (SAS) process with Tween 80 as a solubilizing agent and permeation enhancer. Different processing parameters that can govern the mean particle size and size distribution of nanoparticles were well investigated by manipulating the types of solvents, mixing vessel pressure, mixing vessel temperature, CO2 flow rate, solution flow rate and solution concentration. Solid state characterization was done by Fourier Transform infrared spectroscopy, differential scanning calorimetry, dynamic light scattering, scanning electron microscopy, and powder X-ray diffraction study. Solubility and dissolution profile of SAS-processed CUR were found to be significantly increased in comparison with native CUR. Further, a validated ultra-performance liquid chromatographic method with quadrupole-time of flight-mass spectrometry was developed to investigate the pharmacokinetic parameters after a single oral dose (100mg/kg) administration of CUR (before/after SAS-processed) in male Wistar rats. From the plasma concentration vs. time profile graph, oral bioavailability of SAS-processed CUR was found to be increased approximately 11.6-fold (p<0.001) as compared to native CUR. Copyright © 2015 Elsevier B.V. All rights reserved.

Promoting Oral Health in 6-12 Year-Old Students: A Systematic Review

Directory of Open Access Journals (Sweden)

Seyed Mohammad Mehdi Hazavehei

2015-03-01

Full Text Available Background and Objectives: The group of 6-12 year-old students are the main target of oral health programs due to the high prevalence of dental caries and the formation of permanent teeth during this age and the lifestyle-shaping nature of the period. Schools provide the easiest and most effective means of accessing this group. The present study was conducted to examine the impact of school-based interventions on improved oral health in 6-12 year-old students. Materials and Methods: The present systematic review searched for its English and Persian keywords in databases such as the Scopus, Proquest, Science Direct, Pubmed, Springer, Biomed Central, Google Scholar, IranMedex and SID and examined studies published between January 2004 and September 2014 about educational interventions aiming to prevent oral diseases and promote associated health behaviors in students. Results: The 17 studies selected for examination were divided into two categories: first, assessing an education based on self-care behaviors and preventive services second, assessing an education based on self-care behaviors only. Those interventions that were consistent in nature, involved the parents and the school personnel, used behavior change models, used a combination of several training methods, used practical experiences and provided preventive services were more effective in promoting knowledge and health behaviors and reducing dental caries and plaque in this group of children. Conclusion: Providing consistent community-based education, using a combination of several organized educational programs, following up on the children's progress, using behavior change theories and models and providing prevention services are the most effective measures for achieving the desired goals.

Preparation of Mg2FeH6 Nanoparticles for Hydrogen Storage Properties

Directory of Open Access Journals (Sweden)

N. A. Niaz

2013-01-01

Full Text Available Magnesium (Mg and iron (Fe nanoparticles are prepared by thermal decomposition of bipyridyl complexes of metals. These prepared Mg-Fe (2 : 1 nanoparticles are hydrogenated under 4 MPa hydrogen pressure and 673 K for 48 hours to achieve Mg2FeH6. Their structural analysis was assessed by applying manifold techniques. The hydrogen storage properties of prepared compound were measured by Sieverts type apparatus. The desorption kinetics were measured by high pressure thermal desorption spectrometer (HP-TDS. More than 5 wt% hydrogen released was obtained by the Mg2FeH6 within 5 min, and during rehydrogenation very effective hydrogen absorption rate was observed by the compound.

Thermomechanical response of 3D laser-deposited Ti–6Al–4V alloy over a wide range of strain rates and temperatures

Energy Technology Data Exchange (ETDEWEB)

Li, Peng-Hui [School of Aeronautics, Northwestern Polytechnical University, Xi’an 710072 (China); Guo, Wei-Guo, E-mail: weiguo@nwpu.edu.cn [School of Aeronautics, Northwestern Polytechnical University, Xi’an 710072 (China); Huang, Wei-Dong [The State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi’an 710072 (China); Su, Yu [Department of Mechanics, School of Aerospace Engineering, Beijing Institute of Technology, Beijing 100081 (China); Lin, Xin [The State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi’an 710072 (China); Yuan, Kang-Bo [School of Aeronautics, Northwestern Polytechnical University, Xi’an 710072 (China)

2015-10-28

To understand and evaluate the thermomechanical property of Ti–6Al–4V alloy prepared by the 3D laser deposition technology, an uniaxial compression test was performed on cylindrical samples using an electronic universal testing machine and enhanced Hopkinson technique, over the range of strain rate from 0.001/s to 5000/s, and at initial temperatures from the room temperature to 1173 K. The microstructure of the undeformed and deformed samples was examined through optical microscopy and the use of scanning electron microscope (SEM). The experimental results show the followings: (1) the anisotropy of the mechanical property of this alloy is not significant despite the visible stratification at the exterior surfaces; (2) initial defects, such as the initial voids and lack of fusion, are found in the microstructure and in the crack surfaces of the deformed samples, and they are considered as a major source of crack initiation and propagation; (3) adiabatic shear bands and shearing can easily develop at all selected temperatures for samples under compression; (4) the yield and ultimate strengths of this laser-deposited Ti–6Al–4V alloy are both lower than those of the Ti–6Al–4V alloy prepared by forging and electron beam melting, whereas both of its strengths are higher than those of a conventional grade Ti–6Al–4V alloy at high strain rate only. In addition to compression tests we also conducted tensile loading tests on the laser-deposited alloy at both low and high strain rates (0.1/s and 1000/s). There is significant tension/compression asymmetry in the mechanical response under high-strain-rate loading. It was found that the quasi-static tensile fracturing exhibits typical composite fracture characteristic with quasi-cleavages and dimples, while the high-strain-rate fracturing is characterized by ductile fracture behavior.

Increasing the dissolution rate and oral bioavailability of the poorly water-soluble drug valsartan using novel hierarchical porous carbon monoliths.

Science.gov (United States)

Zhang, Yanzhuo; Che, Erxi; Zhang, Miao; Sun, Baoxiang; Gao, Jian; Han, Jin; Song, Yaling

2014-10-01

In the present study, a novel hierarchical porous carbon monolith (HPCM) with three-dimensionally (3D) ordered macropores (∼ 400 nm) and uniform accessible mesopores (∼ 5.2 nm) was synthesized via a facile dual-templating technique using colloidal silica nanospheres and Poloxamer 407 as templates. The feasibility of the prepared HPCM for oral drug delivery was studied. Valsartan (VAL) was chosen as a poorly water-soluble model drug and loaded into the HPCM matrix using the solvent evaporation method. Scanning electron microscopy (SEM) and specific surface area analysis were employed to characterize the drug-loaded HPCM-based formulation, confirming the successful inclusion of VAL into the nanopores of HPCM. Powder X-ray diffraction (PXRD) and differential scanning calorimetry (DSC) demonstrated that the incorporated drug in the HPCM matrix was in an amorphous state and the VAL formulation exhibited good physical stability for up to 6 months. In vitro tests showed that the dissolution rate of HPCM-based formulation was increased significantly compared with that of crystalline VAL or VAL-loaded 3D ordered macroporous carbon monoliths (OMCMs). Furthermore, a pharmacokinetic study in rats demonstrated about 2.4-fold increase in oral bioavailability of VAL in the case of HPCM-based formulation compared with the commercially available VAL preparation (Valzaar(®)). These results therefore suggest that HPCM is a promising carrier able to improve the dissolution rate and oral bioavailability of the poorly water-soluble drug VAL. Copyright © 2014. Published by Elsevier B.V.

Crystal structure and magnetic properties of the solid-solution phase Ca3Co2-v Sc v O6

International Nuclear Information System (INIS)

Hervoches, Charles H.; Fredenborg, Vivian Miksch; Kjekshus, Arne; Fjellvag, Helmer; Hauback, Bjorn C.

2007-01-01

The two crystallographically non-equivalent Co atoms of the quasi-one-dimensional crystal structure of Ca 3 Co 2 O 6 form chains with alternating, face-sharing polyhedra of Co2O 6 trigonal prisms and Co1O 6 octahedra. This compound forms a substitutional solid-solution phase with Sc, in which the Sc atoms enter the Co2 sublattice exclusively. The homogeneity range of Ca 3 Co 2- v Sc v O 6 (more specifically Ca 3 Co1Co2 1- v Sc v O 6 ) extends up to v∼0.55. The crystal structure belongs to space group R3-barc with lattice parameters (in hexagonal setting): 9.0846(3)≤a≤9.1300(2) A and 10.3885(4)≤c≤10.4677(4) A. The magnetic moment decreases rapidly with increasing amount of the non-magnetic Sc solute in the lattice. - Graphical abstract: The quasi-one-dimensional Ca 3 Co 2 O 6 phase forms a substitutional solid-solution system with Sc, in which the Sc atoms enter the Co2 sublattice exclusively. The homogeneity range of Ca 3 Co 2- v Sc v O 6 extends up to v∼0.55. The magnetic moment decreases rapidly with increasing amount of the non-magnetic Sc solute in the lattice

Development of 6.6 kV/600 A superconducting fault current limiter using coated conductors

Energy Technology Data Exchange (ETDEWEB)

Yazawa, T., E-mail: takashi.yazawa@toshiba.co.j [Toshiba Corporation, Power Systems Company (Japan); Koyanagi, K.; Takahashi, M.; Toba, K.; Takigami, H.; Urata, M. [Toshiba Corporation, Power Systems Company (Japan); Iijima, Y.; Saitoh, T. [Fujikura Ltd. (Japan); Amemiya, N. [Superconductivity Research Laboratory, ISTEC (Japan); Shiohara, Y. [Department of Electrical Engineering, Kyoto University (Japan); Ito, T. [Tokyo Gas Co., Ltd. (Japan)

2009-10-15

As one of the programs in the Ministry of Economy, Trade and Industry (METI) project regarding R and D on superconducting coated conductor, three-phase superconducting fault current limiter (SFCL) for 6.6 kV application was developed and successfully tested. The developed SFCL was mainly comprised three-phase set of current limiting coils installed in a sub-cooled nitrogen cryostat with a GM cryocooler, circuit breakers and a sequence circuit. The whole system was installed in a cubicle. Two tapes of coated conductor were wound in parallel in each coil to obtain the rated current of 72 A rms. After developing the whole SFCL system, short circuit experiments were implemented with a short circuit generator. In a three-line ground fault test, the SFCL successfully restricted the prospected short circuit current over 1.6 kA to about 800 A by the applied voltage of 6.6 kV. The SFCL was installed in a user field and connected with a gas engine generator, followed by a consecutive operation. In this program, 600 A class FCL coil, with which four coated conductor tapes were wound, was also developed. The coil showed sufficiently low AC loss at the rated current. With these results, the program attained the planned target of the fundamentals for the 6.6 kV/600 A SFCL.

Solid self-nanoemulsifying drug delivery systems for oral delivery of polypeptide-k: Formulation, optimization, in-vitro and in-vivo antidiabetic evaluation.

Science.gov (United States)

Garg, Varun; Kaur, Puneet; Singh, Sachin Kumar; Kumar, Bimlesh; Bawa, Palak; Gulati, Monica; Yadav, Ankit Kumar

2017-11-15

Development of self-nanoemulsifying drug delivery systems (SNEDDS) of polypeptide-k (PPK) is reported with the aim to achieve its oral delivery. Box-Behnken design (BBD) was adopted to develop and optimize the composition of SNEDDS. Oleoyl polyoxyl-6 glycerides (A), Tween 80 (B), and diethylene glycol monoethyl ether (C) were used as oil, surfactant and co-surfactant, respectively as independent variables. The effect of variation in their composition was observed on the mean droplet size (y1), polydispersity index (PDI) (y2), % drug loading (y3) and zeta potential (y4). As per the optimal design, seventeen SNEDDS prototypes were prepared. The optimized composition of SNEDDS formulation was 25% v/v Oleoyl polyoxyl-6 glycerides, 37% v/v Tween 80, 38% v/v diethylene glycol monoethyl ether, and 3% w/v PPK. The optimized formulation revealed values of y1, y2, y3, and y4 as 31.89nm, 0.16, 73.15%, and -15.65mV, respectively. Further the optimized liquid SNEDDS were solidified through spray drying using various hydrophilic and hydrophobic carriers. Among the various carriers, Aerosil 200 was found to provide desirable flow, compression, disintegration and dissolution properties. Both, liquid and solid-SNEDDS have shown release of >90% within 10min. The formulation was found stable with change in pH, dilution, temperature variation and freeze thaw cycles in terms of droplet size, zeta potential, drug precipitation and phase separation. Crystalline PPK was observed in amorphous state in solid SNEDDS when characterized through DSC and PXRD studies. The biochemical, hematological and histopathological results of streptozotocin induced diabetic rats shown promising antidiabetic potential of PPK loaded in SNEDDS at its both the doses (i.e. 400mg/kg and 800mg/kg) as compared to its naïve form at both the doses. The study revealed successful formulation of SNEDDS for oral delivery of PPK. Copyright © 2017 Elsevier B.V. All rights reserved.

Interleukin-6 and neopterin levels in the serum and saliva of patients with Lichen planus and oral Lichen planus.

Science.gov (United States)

Abdel-Haq, Ayman; Kusnierz-Cabala, Beata; Darczuk, Dagmara; Sobuta, Eliza; Dumnicka, Paulina; Wojas-Pelc, Anna; Chomyszyn-Gajewska, Maria

2014-11-01

Lichen planus together with its oral variant is a chronic, inflammatory disease of the skin and the mucosa of unclear aetiology and with an unpredictable course that still poses a major problem in terms of diagnosis and treatment. The objective of this study was to assess the concentrations of interleukin-6 (IL-6) and neopterin in saliva and serum of patients with lichen planus (including reticular and erosive form of oral lichen planus) and to compare them with the concentrations observed in healthy controls. The study material comprised serum and saliva samples from 56 patients diagnosed with lichen planus and 56 healthy volunteers. The ELISA test was used to measure concentrations of IL-6 and neopterin in the serum and saliva of the study participants. The concentrations of IL-6 in saliva and serum of patients with lichen planus were significantly higher than in controls (P = 0.0002; P oral lichen planus had significantly higher IL-6 concentrations in their saliva compared to patients with reticular form of disease (P = 0.01). The concentrations of neopterin were significantly higher in the serum but not in saliva of lichen planus patients vs. controls (P lichen planus as well as the salivary concentrations of IL-6. The differences observed in IL-6 levels in patients with erosive-atrophic forms of oral lichen planus may indicate a substantial role played by the cytokine in the disease. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Structural and electrical properties of polycrystalline CdSe thin films, before and after irradiation with 6 MeV accelerated electrons

International Nuclear Information System (INIS)

Ion, L.; Antohe, V.A.; Tazlaoanu, C.; Antohe, S.; Scarlat, F.

2004-01-01

Structural and electrical properties of polycrystalline CdSe thin films irradiated with high-energy electrons are analyzed. The samples were prepared by vacuum deposition of CdSe powder onto optical glass substrate. Their structure and the temperature dependence of the electrical resistance were determined, both before and after irradiation with 6 MeV electrons at fluencies up to 10 16 electrons/cm 2 . There were no measurable changes in the crystalline structure of the films after irradiation. Electrical properties are controlled by the defect level of donor type, possibly a selenium vacancy, with two ionizing states having ionization energies of about 0.40 eV and 0.22 eV, respectively. The major effect of the irradiation is to increase significantly the concentration of these defects. (authors)

Marginal microleakage evaluation in class V composite restorations of deciduous teeth prepared conventionally and using Er:YAG laser

International Nuclear Information System (INIS)

Pulga, Neusa Vieira Galvao

2001-01-01

The evaluation of marginal microleakage in class V restorations of deciduous teeth prepared using Er:laser and comparison to the ones observed when conventionally prepared, using two photopolimerizable materials, composite resin and glass ionomer cement, was the subject of this study. Twenty eight complete deciduous teeth were divided into four groups Group 1 (G1) prepared with high speed drill + composite resin; Group 2 (G2) prepared with high speed drill + glass ionomer cement; Group 3 (G3) prepared using Er:YAG laser (2.94 μm), 300 mJ, 3 Hz, handpiece 2051, energy density 86 mJ/cm 2 + composite resin; Group 4 (G4) prepared using Er:YAG laser (2.94 μm), 300 mJ, 3 Hz, handpiece 2051, energy density 86 J / cm 2 + glass ionomer cement. After the preparation and restoration the specimens where stored at 37 deg C for 24 hours, thermally stressed, immersed in 50% aqueous solution of silver nitrate for 24 hours while kept in the dark. The specimens were rinsed in water, soaked in photodeveloping solution and exposed to fluorescent light for 6 hours. After this process the samples were sectioned and observed by stereomicroscopy. For comparison the groups were divided into occlusive and cervical microleakage. The results were analysed under the Kruskal-Wallis test. For the occlusive microleakage the statistical significance was 5% among the groups and the average comparison showed higher microleakage for G1 (M=35.1) than for G2 (M=24.0) as well as compared to G3 (M=22.3). The other groups did not present statistical differences among them. For the cervical microleakage the Kruskal-Wallis test did not present any statistical difference. Comparing the occlusive and cervical microleakage data, for every group, using the Wilcoxon test, no statistical differences were observed. Concluding, this study showed the Er:YAG laser to be effective for class V restorations and to result in a smaller microleakage degree using the composite resin. These results indicate the viability

Oral traumatic ulcerative granuloma with stromal eosinophilia: A clinicopathological study of 34 cases.

Science.gov (United States)

Shen, Wei-Ren; Chang, Julia Yu-Fong; Wu, Yang-Che; Cheng, Shih-Jung; Chen, Hsin-Ming; Wang, Yi-Ping

2015-09-01

Traumatic ulcerative granuloma with stromal eosinophilia (TUGSE) is a special oral ulcerative lesion that shares many clinical features of an oral squamous cell carcinoma. This study reports the clinicopathological features of 34 oral TUGSE lesions in Taiwanese patients. Thirty-four TUGSE cases were retrieved from the files of the Department of Oral Pathology and Oral Diagnosis, National Taiwan University Hospital from 2003 to 2009. Their clinical data and histopathological features were examined, collected, and analyzed. The study group included 22 male and 12 female patients (64.7% and 35.3%, respectively) with oral TUGSE. The mean age of the patients was 49 years (range, 8 to 80 years). The most common site for oral TUGSE lesions was the tongue (23 cases, 67.6%), followed by the buccal mucosa (6 cases, 17.6%), retromolar area (2 cases, 5.9%), floor of the mouth and lingual sulcus (2 cases, 5.9%), and lip (1 case, 3.0%). For 23 tongue cases, 19 occurred on the dorsum and the tip (82.6%) and 4 on the ventral surface (17.4%). Of the 34 oral TUGSE lesions, 13 (38.2%) had a mild, 11 (32.4%) a moderate, and 10 (29.4%) a severe eosinophilic infiltrate. Oral TUGSE lesions occur more frequently on the dorsal surface and the tip of the tongue and in male patients between 41 and 60 years of age. The eosinophilic infiltrates in oral TUGSE lesions show a scattered or clustered pattern, and their density varies from case to case. Oral TUGSE is a self-limiting lesion, and aggressive surgical treatment is usually not required. Copyright © 2013. Published by Elsevier B.V.

Enhanced oral bioavailability of silymarin using liposomes containing a bile salt: preparation by supercritical fluid technology and evaluation in vitro and in vivo

Science.gov (United States)

Yang, Gang; Zhao, Yaping; Zhang, Yongtai; Dang, Beilei; Liu, Ying; Feng, Nianping

2015-01-01

The aim of this investigation was to develop a procedure to improve the dissolution and bioavailability of silymarin (SM) by using bile salt-containing liposomes that were prepared by supercritical fluid technology (ie, solution-enhanced dispersion by supercritical fluids [SEDS]). The process for the preparation of SM-loaded liposomes containing a bile salt (SM-Lip-SEDS) was optimized using a central composite design of response surface methodology with the ratio of SM to phospholipids (w/w), flow rate of solution (mL/min), and pressure (MPa) as independent variables. Particle size, entrapment efficiency (EE), and drug loading (DL) were dependent variables for optimization of the process and formulation variables. The particle size, zeta potential, EE, and DL of the optimized SM-Lip-SEDS were 160.5 nm, −62.3 mV, 91.4%, and 4.73%, respectively. Two other methods to produce SM liposomes were compared to the SEDS method. The liposomes obtained by the SEDS method exhibited the highest EE and DL, smallest particle size, and best stability compared to liposomes produced by the thin-film dispersion and reversed-phase evaporation methods. Compared to the SM powder, SM-Lip-SEDS showed increased in vitro drug release. The in vivo AUC0−t of SM-Lip-SEDS was 4.8-fold higher than that of the SM powder. These results illustrate that liposomes containing a bile salt can be used to enhance the oral bioavailability of SM and that supercritical fluid technology is suitable for the preparation of liposomes. PMID:26543366

Microstructure of Ti-6Al-4V produced by selective laser melting

International Nuclear Information System (INIS)

Simonelli, M; Tse, Y Y; Tuck, C

2012-01-01

Ti-6Al-4V is the most widely used titanium alloy. Manufacturing of Ti-6Al-4V components using novel additive processing techniques such as selective laser melting is of great interest. This study focuses on the microstructure characterisation of Ti-6Al-4V components produced by selective laser melting (SLM) with full (Ti-6Al-4V base plate) and partial (Ti-6Al-4V needle-shaped bed) support. The starting material, a plasma atomised powder, and the component products are studied using various microscopy techniques including optical, scanning electron and transmission electron microscopy and electron backscattered diffraction (EBSD). Powder particles are fully dense, possess a spherical shape and are composed of acicular α phase. The as-built material shows oriented acicular martensitic phase with well defined columnar grains. The morphology of martensitic phase and microstructural evolution will be discussed in relation to the SLM processing parameters employed and the different cooling rates experienced by the components.

Preparation and Characterization of Promoted Fe-V/SiO2 Nanocatalysts for Oxidation of Alcohols

Directory of Open Access Journals (Sweden)

Hamid Reza Rafiee

2013-01-01

Full Text Available A series of SiO2 supported iron-vanadium catalysts were prepared using sol-gel and wetness impregnation methods. This research investigates the effects of V and Cu on the structure and morphology of Fe/SiO2 catalysts. The SiO2 supported catalyst with the highest specific surface area and pore volume was obtained when it is containing 40 wt.% Fe, 15 wt.% V, and 2 wt.% Cu. Characterization of prepared catalysts was carried out by powder X-ray diffraction (XRD, scanning electron microcopy (SEM, vibrating sample magnetometry (VSM, Fourier transform infrared (FT-IR spectrometry, temperature program reduction (TPR, N2 physisorption, and thermal analysis methods such as thermal gravimetric analysis (TGA and differential scanning calorimetry (DSC. The Fe-V/SiO2 catalyst promoted with 2 wt.% of Cu exhibited typical ferromagnetic behavior at room temperature with a saturation magnetization value of 11.44 emu/g. This character of catalyst indicated great potential for application in magnetic separation technologies. The prepared catalyst was found to act as an efficient recoverable nanocatalyst for oxidation reaction of alcohols to aldehydes and ketones in aqueous media under mild condition. Moreover, the catalyst was reused five times without significant degradation in catalytic activity and performance.

Structural analysis during the development of the Ford Lion V6 engine; Strukturanalysen bei der Entwicklung des neuen Ford-Lion-V6-Dieselmotors

Energy Technology Data Exchange (ETDEWEB)

Parker, M.J.; Moore, D.S. [Perkins Engines Co., Peterborough (United Kingdom); Gill, S. [Ford Motor Co., Dearborn, MI (United States); Rowley, J. [Ford Motor Co. Ltd., Basildon (United Kingdom)

2006-04-15

Ford and PSA Peugeot Citroen have recently launched their new 2.7 litre Lion V6-HSDI engine for installation into the Jaguar 'S' type platform. The engine was developed to provide market leading noise, vibration and harshness whilst simultaneously providing high power density and meeting the Euro 4 emissions requirements. This paper describes the advanced computer based predictive analysis that was used to support and validate the design of core engine components at each of the individual Ford Product Development System (FPDS) phases for the Lion V6 engine. (orig.)

Application of nanoparticles for oral delivery of acid-labile lansoprazole in the treatment of gastric ulcer: in vitro and in vivo evaluations

Directory of Open Access Journals (Sweden)

Alai M

2015-06-01

Full Text Available Milind Alai,1 Wen Jen Lin1,2 1Graduate Institute of Pharmaceutical Sciences, School of Pharmacy, 2Drug Research Center, College of Medicine, National Taiwan University, Taipei, Taiwan Abstract: The aim of this study was to develop nanoparticles for oral delivery of an acid-labile drug, lansoprazole (LPZ, for gastric ulcer therapy. LPZ-loaded positively charged Eudragit® RS100 nanoparticles (ERSNPs-LPZ and negatively charged poly(lactic-co-glycolic acid nanoparticles (PLGANPs-LPZ were prepared. The effect of charge on nanoparticle deposition in ulcerated and non-ulcerated regions of the stomach was investigated. The cellular uptake of nanoparticles in the intestine was evaluated in a Caco-2 cell model. The pharmacokinetic performance and ulcer healing response of LPZ-loaded nanoparticles following oral administration were evaluated in Wistar rats with induced ulcers. The prepared drug-loaded ERSNPs-LPZ and PLGANPs-LPZ possessed opposite surface charge (+38.5±0.3 mV versus -27.3±0.3 mV, respectively and the particle size was around 200 nm with a narrow size distribution. The negatively charged PLGANPs adhered more readily to the ulcerated region (7.22%±1.21% per cm2, whereas the positively charged ERSNPs preferentially distributed in the non-ulcerated region (8.29%±0.35% per cm2. Both ERSNPs and PLGANPs were prominent uptake in Caco-2 cells, too. The nanoparticles sustained and prolonged LPZ concentrations up to 24 hours, and the half-life and mean residence time of LPZ were prolonged by 3.5-fold and 4.5-fold, respectively, as compared with LPZ solution. Oral administration of LPZ-loaded nanoparticles healed 92.6%–95.7% of gastric ulcers in Wistar rats within 7 days. Keywords: nanoparticles, lansoprazole, Eudragit® RS100, PLGA

Oral warfarin affects peripheral blood leukocyte IL-6 and TNFα production in rats.

Science.gov (United States)

Popov, Aleksandra; Belij, Sandra; Subota, Vesna; Zolotarevski, Lidija; Mirkov, Ivana; Kataranovski, Dragan; Kataranovski, Milena

2013-01-01

Warfarin is a Vitamin K (VK) antagonist that affects Vitamin K-dependent (VKD) processes, including blood coagulation, as well as processes unrelated to hemostasis such as bone growth, calcification, and growth of some cell types. In addition, warfarin exerts influence on some non-VKD-related activities, including anti-tumor and immunomodulating activity. With respect to the latter, both immune stimulating and suppressive effects have been noted in different experimental systems. To explore the in vivo immunomodulatory potential of warfarin on one type of activity (i.e., cytokine production) in two different immune cell populations (i.e., mononuclear or polymorphonuclear cells), effects of subchronic oral warfarin intake in rats on pro-inflammatory cytokine (i.e., TNFα, IL-6) production by peripheral blood mononuclear and polymorphonuclear cells (granulocytes) was examined. Differential effects of warfarin intake on TNFα and IL-6 were noted, depending on the type of peripheral blood leukocytes and on the cytokine examined. Specifically, a lack of effect on TNFα and a priming of IL-6 production by mononuclear cells along with a decrease in TNFα and a lack of effect on IL-6 in polymorphonuclear cells were seen in warfarin-exposed hosts. The cell- and cytokine-dependent effects from subchronic oral warfarin intake on peripheral blood leukocytes demonstrated in this study could, possibly, differentially affect reactions mediated by these cells. Ultimately, the observed effects in rats might have implications for those humans who are on long-term/prolonged warfarin therapy.

Novel sodium intercalated (NH4)2V6O16 platelets: High performance cathode materials for lithium-ion battery.

Science.gov (United States)

Fei, Hailong; Wu, Xiaomin; Li, Huan; Wei, Mingdeng

2014-02-01

A simple and versatile method for preparation of novel sodium intercalated (NH4)2V6O16 is developed via a simple hydrothermal route. It is found that ammonium sodium vanadium bronze displays higher discharge capacity and better rate cyclic stability than ammonium vanadium bronze as lithium-ion battery cathode material because of smaller charge transfer resistance, which would favor superior discharge capacity and rate performance. Crown Copyright © 2013. Published by Elsevier Inc. All rights reserved.

Plasma-sprayed CaTiSiO5 ceramic coating on Ti-6Al-4V with excellent bonding strength, stability and cellular bioactivity

Science.gov (United States)

Wu, Chengtie; Ramaswamy, Yogambha; Liu, Xuanyong; Wang, Guocheng; Zreiqat, Hala

2008-01-01

Novel Ca-Si-Ti-based sphene (CaTiSiO5) ceramics possess excellent chemical stability and cytocompatibility. The aim of this study was to prepare sphene coating on titanium alloy (Ti-6Al-4V) for orthopaedic applications using the plasma spray method. The phase composition, surface and interface microstructure, coating thickness, surface roughness and bonding strength of the plasma-sprayed sphene coating were analysed using X-ray diffraction, scanning electron microscopy, atomic force microscopy and the standard mechanical testing of the American Society for Testing and Materials, respectively. The results indicated that sphene coating was obtained with a uniform and dense microstructure at the interface of the Ti-6Al-4V surface and the thickness and surface roughness of the coating were approximately 150 and 10 μm, respectively. Plasma-sprayed sphene coating on Ti-6Al-4V possessed a significantly improved bonding strength and chemical stability compared with plasma-sprayed hydroxyapatite (HAp) coating. Plasma-sprayed sphene coating supported human osteoblast-like cell (HOB) attachment and significantly enhanced HOB proliferation and differentiation compared with plasma-sprayed HAp coating and uncoated Ti-6Al-4V. Taken together, plasma-sprayed sphene coating on Ti-6Al-4V possessed excellent bonding strength, chemical stability and cellular bioactivity, indicating its potential application for orthopaedic implants. PMID:18664431

Aminoclay–lipid hybrid composite as a novel drug carrier of fenofibrate for the enhancement of drug release and oral absorption

Directory of Open Access Journals (Sweden)

Yang L

2016-03-01

Full Text Available Liang Yang, Yating Shao, Hyo-Kyung Han BK Plus Project Team, College of Pharmacy, Dongguk University, Goyang, South Korea Abstract: This study aimed to prepare the aminoclay–lipid hybrid composite to enhance the drug release and improve the oral bioavailability of poorly water-soluble fenofibrate. Antisolvent precipitation coupled with an immediate freeze-drying method was adopted to incorporate fenofibrate into aminoclay–lipid hybrid composite (ALC. The optimal composition of the ALC formulation was determined as the ratios of aminoclay to krill oil of 3:1 (w/w, krill oil to fenofibrate of 2:1 (w/w, and antisolvent to solvent of 6:4 (v/v. The morphological characteristics of ALC formulation were determined using scanning electron microscopy, differential scanning calorimetry, and X-ray powder diffraction, which indicated microcrystalline state of fenofibrate in ALC formulation. The ALC formulation achieved almost complete dissolution within 30 minutes, whereas the untreated powder and physical mixture exhibited less than 15% drug release. Furthermore, ALC formulation effectively increased the peak plasma concentration (Cmax and area under the curve (AUC of fenofibric acid (an active metabolite in rats by approximately 13- and seven-fold, respectively. Furthermore, ALC formulation exhibited much lower moisture sorption behavior than the lyophilized formulation using sucrose as a cryoprotectant. Taken together, the present findings suggest that ALC formulation is promising for improving the oral absorption of poorly soluble fenofibrate. Keywords: aminoclay, omega-3 phospholipids, fenofibrate, drug release, oral absorption 

Biocorrosion of TiO2 nanoparticle coating of Ti–6Al–4V in DMEM under specific in vitro conditions

International Nuclear Information System (INIS)

Höhn, Sarah; Virtanen, Sannakaisa

2015-01-01

Highlights: • Possibility to fabricate a TiO 2 NP-coating on Ti–6Al–4V by a simple spin-coating method. • The NP-coating enhances biomimetic apatite formation on the surface immersed in DMEM. • The TiO 2 coating can efficiently reduce Al release from the alloy during immersion in DMEM. • TiO 2 NP-coating makes the surface more bioactive. - Abstract: A TiO 2 nanoparticle coating was prepared on a biomedical Ti–6Al–4V alloy using “spin-coating” technique with a colloidal suspension of TiO 2 nanopowders with the aim to optimize the surface morphology (e.g., roughness) for improved biocompatibility. The influence of a TiO 2 nanoparticle (NP) coating on the corrosion behavior, metal ion release, and biomimetic apatite formation was studied in DMEM, at 37.5 °C with a continuous supply of 5% CO 2 . Electrochemical impedance spectroscopy measurements indicate a formation of a new layer on the surface of the NP-coated sample upon 28 days immersion in DMEM. Scanning electron microscopy (SEM) and X-ray spectroscopy confirm that the surface of the NP-coated Ti–6Al–4V shows a complete coverage by a Ca–phosphate layer in contrast to the non-coated Ti–6Al–4V alloy. Hence, the TiO 2 -NP coating strongly enhances biomimetic apatite formation on the alloy surface. In addition, the TiO 2 -NP coating can efficiently reduce Al-release from the alloy, for which the bare Ti–6Al–4V alloy is significant for at least 28 days of immersion in DMEM

Technical preparations for the in-vessel 14 MeV neutron calibration at JET

International Nuclear Information System (INIS)

Batistoni, P.; Popovichev, S.; Crowe, R.; Cufar, A.; Ghani, Z.; Keogh, K.; Peacock, A.; Price, R.; Baranov, A.; Korotkov, S.; Lykin, P.; Samoshin, A.

2017-01-01

Highlights: • The JET 14 MeV neutron calibration requires a neutron generator to be deployed inside the vacuum vessel by means of the remote handling system. • A neutron generator of suitable intensity and compliant with physics, remote handling and safety requirements has been identified and procured.The scientific programme of the preparatory phase devoted to fully characterizing the selected 14 MeV neutron generator is discussed. • The aim is to measure the absolute neutron emission rate within (± 5%) and the energy spectrum of emitted neutron as a function of angles. • The physics preparations, source issues, safety and engineering aspects required to calibrate directly the JET neutron detectors are discussed. - Abstract: The power output of fusion devices is measured from their neutron yields which relate directly to the fusion yield. In this paper we describe the devices and methods that have been prepared to perform a new in situ 14 MeV neutron calibration at JET in view of the new DT campaign planned at JET in the next years. The target accuracy of this calibration is ±10% as required for ITER, where a precise neutron yield measurement is important, e.g., for tritium accountancy. In this paper, the constraints and early decisions which defined the main calibration approach are discussed, e.g., the choice of 14 MeV neutron source and the deployment method. The physics preparations, source issues, safety and engineering aspects required to calibrate directly the JET neutron detectors are also discussed. The existing JET remote-handling system will be used to deploy the neutron source inside the JET vessel. For this purpose, compatible tooling and systems necessary to ensure safe and efficient deployment have been developed. The scientific programme of the preparatory phase is devoted to fully characterizing the selected 14 MeV neutron generator to be used as the calibrating source, obtain a better understanding of the limitations of the

Technical preparations for the in-vessel 14 MeV neutron calibration at JET

Energy Technology Data Exchange (ETDEWEB)

Batistoni, P., E-mail: paola.batistoni@enea.it [ENEA, Department of Fusion and Nuclear Safety Technology, I-00044, Frascati, Rome (Italy); EUROfusion Consortium, Culham Science Centre, Abingdon, Oxon, OX14 3DB (United Kingdom); Popovichev, S. [CCFE, Culham Science Centre, Abingdon, Oxon, OX14 3DB (United Kingdom); EUROfusion Consortium, Culham Science Centre, Abingdon, Oxon, OX14 3DB (United Kingdom); Crowe, R. [Remote Applications in Challenging Environments (RACE), Culham Science Centre, Abingdon, Oxon, OX14 3DB (United Kingdom); EUROfusion Consortium, Culham Science Centre, Abingdon, Oxon, OX14 3DB (United Kingdom); Cufar, A. [Reactor Physics Division, Jožef Stefan Institute, Jamova cesta 39, SI-1000, Ljubljana (Slovenia); EUROfusion Consortium, Culham Science Centre, Abingdon, Oxon, OX14 3DB (United Kingdom); Ghani, Z. [CCFE, Culham Science Centre, Abingdon, Oxon, OX14 3DB (United Kingdom); EUROfusion Consortium, Culham Science Centre, Abingdon, Oxon, OX14 3DB (United Kingdom); Keogh, K. [Remote Applications in Challenging Environments (RACE), Culham Science Centre, Abingdon, Oxon, OX14 3DB (United Kingdom); EUROfusion Consortium, Culham Science Centre, Abingdon, Oxon, OX14 3DB (United Kingdom); Peacock, A. [JET Exploitation Unit, Abingdon, Oxon, OX14 3DB (United Kingdom); Price, R. [Remote Applications in Challenging Environments (RACE), Culham Science Centre, Abingdon, Oxon, OX14 3DB (United Kingdom); EUROfusion Consortium, Culham Science Centre, Abingdon, Oxon, OX14 3DB (United Kingdom); Baranov, A.; Korotkov, S.; Lykin, P.; Samoshin, A. [All-Russia Research Institute of Automatics (VNIIA), 22, Sushchevskaya str., 127055, Moscow (Russian Federation)

2017-04-15

Highlights: • The JET 14 MeV neutron calibration requires a neutron generator to be deployed inside the vacuum vessel by means of the remote handling system. • A neutron generator of suitable intensity and compliant with physics, remote handling and safety requirements has been identified and procured.The scientific programme of the preparatory phase devoted to fully characterizing the selected 14 MeV neutron generator is discussed. • The aim is to measure the absolute neutron emission rate within (± 5%) and the energy spectrum of emitted neutron as a function of angles. • The physics preparations, source issues, safety and engineering aspects required to calibrate directly the JET neutron detectors are discussed. - Abstract: The power output of fusion devices is measured from their neutron yields which relate directly to the fusion yield. In this paper we describe the devices and methods that have been prepared to perform a new in situ 14 MeV neutron calibration at JET in view of the new DT campaign planned at JET in the next years. The target accuracy of this calibration is ±10% as required for ITER, where a precise neutron yield measurement is important, e.g., for tritium accountancy. In this paper, the constraints and early decisions which defined the main calibration approach are discussed, e.g., the choice of 14 MeV neutron source and the deployment method. The physics preparations, source issues, safety and engineering aspects required to calibrate directly the JET neutron detectors are also discussed. The existing JET remote-handling system will be used to deploy the neutron source inside the JET vessel. For this purpose, compatible tooling and systems necessary to ensure safe and efficient deployment have been developed. The scientific programme of the preparatory phase is devoted to fully characterizing the selected 14 MeV neutron generator to be used as the calibrating source, obtain a better understanding of the limitations of the

Espironolactona vía oral en coriorretinopatía serosa central crónica: reporte de un caso

Directory of Open Access Journals (Sweden)

Jorge Othón García Pérez

2016-09-01

En este caso con coriorretinopatía serosa central crónica la terapia antimineralocorticoide con espironolactona vía oral demuestra buenos resultados anatómicos y visuales, al disminuir de manera significativa la cantidad de líquido subfoveal y el grosor macular central, mejorando la agudeza visual mejor corregida sin efectos colaterales.

V0 production in p+A collisions at √(s)=41.6 GeV

International Nuclear Information System (INIS)

Abt, I.; Kisel, I.; Adams, M.; Cruse, C.; Ehret, K.; Funcke, M.; Schwenninger, B.; Wegener, D.; Agari, M.; Bauer, C.; Braeuer, M.; Hofmann, W.; Jagla, T.; Knoepfle, K.T.; Pleier, M.A.; Reeves, K.; Sanchez, F.; Schmelling, M.; Schwingenheuer, B.; Sciacca, F.; Albrecht, H.; Aplin, S.J.; Bagaturia, Y.; Egorytchev, V.; Emeliyanov, D.; Flammer, J.; Goloubkov, D.; Golubkov, Y.; Hohlmann, M.; Lewendel, B.; Lomonosov, B.; Masciocchi, S.; Medinnis, M.; Mevius, M.; Michetti, A.; Negodaev, M.; Noerenberg, M.; Nunez Pardo de Vera, M.T.; Padilla, C.; Ressing, D.; Riu, I.; Rybnikov, V.; Schmidt, B.; Schwarz, A.S.; Soezueer, L.; Somov, A.; Somov, S.; Spengler, J.; Wurth, R.; Aleksandrov, A.; Bohm, G.; Gellrich, A.; Hernandez, J.M.; Mankel, R.; Nowak, S.; Schreiner, A.; Schwanke, U.; Walter, M.; Amaral, V.; Amorim, A.; Bastos, J.; Batista, J.; Carvalho, J.; Silva, L.; Wolters, H.; Aushev, V.; Prystupa, S.; Pugatch, V.; Vassiliev, Yu.; Balagura, V.; Bobchenko, B.; Bogatyrev, A.; Danilov, M.; Essenov, S.; Fominykh, B.; Golutvin, A.; Gouchtchine, O.; Guilitsky, Yu.; Igonkina, O.; Khasanov, F.; Kvaratskheliia, T.; Matchikhilian, I.; Mikhailov, Yu.; Mizuk, R.; Popov, V.; Rostovtseva, I.; Tikhomirov, I.; Titov, M.; Zaitsev, Yu.; Zhelezov, A.; Bargiotti, M.; Bertin, A.; Bruschi, M.; De Castro, S.; Fabbri, L.; Faccioli, P.; Giacobbe, B.; Grimaldi, F.; Massa, I.; Piccinini, M.; Poli, M.; Semprini-Cesari, N.; Spighi, R.; Villa, M.; Vitale, A.; Zoccoli, A.; Barsukova, O.; Belkov, A.; Belkov, Ar.; Belotelov, I.; Golutvin, I.; Karpenko, N.; Kiryushin, Yu.; Lanyov, A.; Solunin, S.; Bauer, T.S.; Hulsbergen, W.; Sbrizzi, A.; Boecker, M.; Buchholz, P.; Husemann, U.; Keller, S.; Walenta, A.H.; Werthenbach, U.; Bruinsma, M.; Ouchrif, M.; Buran, T.; Danielsen, K.M.; Ould-Saada, F.; Pylypchenko, Y.; Conde, P.; Dam, M.; Groth-Jensen, J.; Hansen, J.D.; Klinkby, E.; Muresan, R.; Petersen, B.A.; Xella-Hansen, S.; Deppe, H.; Dreis, H.B.; Eisele, F.; Feuerstack-Raible, M.; Gradl, S.; Gradl, W.; Hott, T.; Kessler, J.; Krauss, C.; Rick, H.; Uwer, U.; Dong, X.; Jiang, C.; Zheng, Z.; Garrido, Ll.; Peralta, D.; Glaess, J.; Maenner, R.; Wurz, A.; Gorbounov, I.; Zeuner, T.; Gorisek, A.; Kupper, S.; Pestotnik, R.; Staric, M.; Zivko, T.; Goulart, D.C.; Schwartz, A.J.; Ispiryan, M.; Lau, K.; Pyrlik, J.; Subramania, H.S.; Kapitza, H.; Symalla, M.; Eldik, C. van; Karabekyan, S.; Pernack, R.; Schroeder, H.; Zimmermann, R.; Kolanoski, H.; Kruecker, D.; Lohse, T.; Medin, G.; Nedden, M. zur; Stegmann, C.; Korpar, S.; Kreuzer, P.; Krizan, P.; Stanovnik, A.; Pose, D.; Robmann, P.; Shuvalov, S.; Spiridonov, A.; Tsakov, I.; Vukotic, I.; Wahlberg, H.; Wang, J.J.; Zavertyaev, M.

2009-01-01

Inclusive doubly differential cross sections d 2 σ pA /dx F dp T 2 as a function of Feynman-x(x F ) and transverse momentum (p T ) for the production of K S 0 , Λ and anti Λ in proton-nucleus interactions at 920 GeV are presented. The measurements were performed by HERA-B in the negative x F range (-0.12 F T =1.6 GeV/c. Results for three target materials: carbon, titanium and tungsten are given. The ratios of production cross sections are presented and discussed. The Cronin effect is clearly observed for all three V 0 species. The atomic number dependence is parameterized as σ pA =σ pN .A α where σ pN is the proton-nucleon cross section. The measured values of α are all near one. The results are compared with EPOS 1.67 and PYTHIA 6.3. EPOS reproduces the data to within ∼20% except at very low transverse momentum. (orig.)

Blistering in alloy Ti–6Al–4V from H + ion implantation

Indian Academy of Sciences (India)

6Al–4V, was studied, following H+ ion implantation of 150 keV and 250 keV energy to fluence of 2.6 × 1018 cm-2 and 2.5 × 1019 cm-2, respectively at ambient temperature. No detectable change was observed in surface features of either of the ...

Improved corrosion resistant and mechanical behavior of distinct composite coatings (silica/titania/zirconia on Ti–6Al–4V deposited by EPD

Directory of Open Access Journals (Sweden)

M. Chellappa

2017-09-01

Full Text Available Synthesized composite powders (ZrO2/TiO2, SiO2/TiO2, and SiO2/ZrO2 were successfully deposited on Ti–6Al–4V by electrophoretic deposition method (EPD to improve its electrochemical characteristics for better biomedical applications. In the present investigation, the three composite powders were prepared by sol–gel synthesis and its phase purity was analyzed by Powder X-ray diffraction (XRD method. Further, the performance of the deposited coatings was assessed by scanning electron microscopy (SEM coupled with energy dispersive X-ray analysis (EDAX, scratch resistance test. The electrochemical properties of the composite coatings were analyzed by Potentiodynamic (Tafel polarization and electrochemical impedance spectroscopy (EIS studies. From the results, we observed that the corrosion resistance behavior of the different composite coated metallic substrate exhibited divergent corrosion resistance nature than blank Ti–6Al–4V. Of all these coatings on Ti–6Al–4V, the composite made up of, ZrO2/TiO2 has pronounced corrosion resistance behavior in Ringer’s solution when compared to others. This behavior is due to the presence of strong adherent coating owing to the existence of uniform deposition on Ti–6Al–4V.

Imidacloprid is hydroxylated by Laodelphax striatellus CYP6AY3v2.

Science.gov (United States)

Wang, R; Zhu, Y; Deng, L; Zhang, H; Wang, Q; Yin, M; Song, P; Elzaki, M E A; Han, Z; Wu, M

2017-10-01

Laodelphax striatellus (Fallén) is one of the most destructive pests of rice, and has developed high resistance to imidacloprid. Our previous work indicated a strong association between imidacloprid resistance and the overexpression of a cytochrome P450 gene CYP6AY3v2 in a L. striatellus imidacloprid resistant strain (Imid-R). In this study, a transgenic Drosophila melanogaster line that overexpressed the L. striatellus CYP6AY3v2 gene was established and was found to confer increased levels of imidacloprid resistance. Furthermore, CYP6AY3v2 was co-expressed with D. melanogaster cytochrome P450 reductase (CPR) in Spodoptera frugiperda 9 (SF9) cells. A carbon monoxide difference spectra analysis indicated that CYP6AY3v2 was expressed predominately in its cytochrome P450 (P450) form, which is indicative of a good-quality functional enzyme. The recombinant CYP6AY3v2 protein efficiently catalysed the model substrate P-nitroanisole to p-nitrophenol with a maximum velocity (V max ) of 60.78 ± 3.93 optical density (mOD)/min/mg protein. In addition, imidacloprid itself was metabolized by the recombinant CYP6AY3v2/nicotinamide adenine dinucleotide 2'-phosphate reduced tetrasodium salt (NADPH) CPR microsomes in in vitro assays (catalytic constant (K cat ) = 0.34 pmol/min/pmol P450, michaelis constant (K m ) = 41.98 μM), and imidacloprid depletion and metabolite peak formation were with a time dependence. The data provided direct evidence that CYP6AY3v2 is capable of hydroxylation of imidacloprid and conferring metabolic resistance in L. striatellus. © 2017 The Royal Entomological Society.

Oral candidiasis following steroid therapy for oral lichen planus.

Science.gov (United States)

Marable, D R; Bowers, L M; Stout, T L; Stewart, C M; Berg, K M; Sankar, V; DeRossi, S S; Thoppay, J R; Brennan, M T

2016-03-01

The purpose of this multicentre study was to determine the incidence of oral candidiasis in patients treated with topical steroids for oral lichen planus (OLP) and to determine whether the application of a concurrent antifungal therapy prevented the development of an oral candidiasis in these patients. Records of 315 patients with OLP seen at four Oral Medicine practices treated for at least 2 weeks with steroids with and without the use of an antifungal regimen were retrospectively reviewed. The overall incidence of oral fungal infection in those treated with steroid therapy for OLP was 13.6%. There was no statistically significant difference in the rate of oral candidiasis development in those treated with an antifungal regimen vs those not treated prophylactically (14.3% vs 12.6%) (P = 0.68). Despite the use of various regimens, none of the preventive antifungal strategies used in this study resulted in a significant difference in the rate of development of an oral candidiasis in patients with OLP treated with steroids. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Formulation strategy and evaluation of nanocrystal piroxicam orally disintegrating tablets manufacturing by freeze-drying.

Science.gov (United States)

Lai, Francesco; Pini, Elena; Corrias, Francesco; Perricci, Jacopo; Manconi, Maria; Fadda, Anna Maria; Sinico, Chiara

2014-06-05

Piroxicam (PRX) is a non-steroidal anti-inflammatory drug characterized by a poor water solubility and consequently by a low oral bioavailability. In this work, different nanocrystal orally disintegrating tablets (ODT) were prepared to enhance piroxicam dissolution rate and saturation solubility. PRX nanocrystals were prepared by means of high pressure homogenization technique using poloxamer 188 as stabilizer. Three different ODTs were prepared with the same nanosuspension using different excipients in order to study their effect on the PRX dissolution properties. PRX nanocrystal size and zeta potential were determined by photon correlation spectroscopy. Additional characterization of PRX nanocrystal ODT was carried out by infrared spectroscopy, X-ray powder diffractometry, differential scanning calorimetry. Dissolution study was performed in distilled water (pH 5.5) and compared with PRX coarse suspension ODT, PRX/poloxamer 188 physical mixture, bulk PRX samples and a PRX commercial ODT. All PRX nanocrystal ODT formulations showed a higher drug dissolution rate than coarse PRX ODT. PRX nanocrystal ODT prepared using gelatin or croscarmellose as excipient showed a higher PRX dissolution rate compared with the commercial formulation and ODT prepared using xanthan gum. Overall results confirmed that improved PRX dissolution rate is due to the increased surface-to-volume ratio due to the nanosized drug particle but also revealed the important role of different excipients used. Copyright © 2014 Elsevier B.V. All rights reserved.

Expression of CD44v6 and Its Association with Prognosis in Epithelial Ovarian Carcinomas

Directory of Open Access Journals (Sweden)

Dang-xia Zhou

2012-01-01

Full Text Available The aim of this study was to evaluate CD44v6 protein expression and its prognostic value of CD44v6 in ovarian carcinoma. The expression of CD44v6 was analyzed in 62 patients with ovarian carcinoma by immunohistochemical method. The data obtained were analyzed by univariate and multivariate analyses. The present study clearly demonstrates that tumor tissues from 41 (66.1% patients showed positive expression with CD44v6. The expression of CD44v6 was significantly correlated with histological type, FIGO stage and histological grade of ovarian carcinomas. Concerning the prognosis, the survival period of patients with CD44v6 positive was shorter than that of patients with CD44v6 negative (36.6% versus 66.7%, 5-year survival, P<0.05. Univariate analysis showed that CD44v6 expression, histological type, FIGO stage and histological grade were associated with 5-year survival, and CD44v6 expression was associated with histological type, FIGO stage and histological grade and 5-year survival. In multivariate analysis, using the COX-regression model, CD44v6 expression was important prognostic factor. In conclusion, these results suggest that CD44v6 may be related to histological type, FIGO stage and histological grade of ovarian carcinomas, and CD44v6 may be an important molecular marker for poor prognosis in ovarian carcinomas.

Preparation and in vitro evaluation of hydrophilic fenretinide nanoparticles.

Science.gov (United States)

Ledet, Grace A; Graves, Richard A; Glotser, Elena Y; Mandal, Tarun K; Bostanian, Levon A

2015-02-20

Fenretinide is an effective anti-cancer drug with high in vitro cytotoxicity and low in vivo systemic toxicity. In clinical trials, fenretinide has shown poor therapeutic efficacy following oral administration - attributed to its low bioavailability and solubility. The long term goal of this project is to develop a formulation for the oral delivery of fenretinide. The purpose of this part of the study was to prepare and characterize hydrophilic nanoparticle formulations of fenretinide. Three different ratios of polyvinyl pyrrolidone (PVP) to fenretinide were used, namely, 3:1, 4:1, and 5:1. Both drug and polymer were dissolved in a mixture of methanol and dichloromethane (2:23 v/v). Rotary evaporation was used to remove the solvents, and, following reconstitution with water, a high pressure homogenizer was used to form nanoparticles. The particle size and polydispersity index were measured before and after lyophilization. The formulations were studied by scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and X-ray powder diffraction (XRPD). The effectiveness of the formulations was assessed by release studies and Caco-2 cell permeability assays. As the PVP content increased, the recovered particle size following lyophilization became more consistent with the pre-lyophilization particle size, especially for those formulations with less lactose. The DSC scans of the formulations did not show any fenretinide melting endotherms, indicating that the drug was either present in an amorphous form in the formulation or that a solid solution of the drug in PVP had formed. For the release studies, the highest drug release among the formulations was 249.2±35.5ng/mL for the formulation with 4:1 polymer-to-drug. When the permeability of the formulations was evaluated in a Caco-2 cell model, the mean normalized flux for each treatment group was significantly higher (p<0.05) from the fenretinide control. The formulation containing 4:1 polymer

Proximity effects on the local magnetic moments of clusters V{sub 6}-V{sub 9} embedded in a Fe matrix

Energy Technology Data Exchange (ETDEWEB)

Sosa-Hernandez, E.M. [Departamento de Matematicas Aplicadas, Facultad de Contaduria y Administration, Universidad Autonoma de San Luis Potosi, Alvaro Obregon 64, 78000 San Luis Potosi, S.L.P. (Mexico); Alvarado-Leyva, P.G. [Departamento de Fisica, Facultad de Ciencias, Universidad Autonoma de San Luis Potosi Alvaro Obregon 64, 78000 San Luis Potosi, S.L.P. (Mexico)]. E-mail: pal@galia.fc.uaslp.mx

2006-11-09

The magnetic behavior of clusters V{sub 6}-V{sub 9} in bulk Fe is determined by using an electronic Hamiltonian which includes s, p and d electrons. The spin density distribution is calculated self-consistenly in the unrestricted Hartree-Fock approximation. The local magnetic moments are obtained at V and Fe atoms; the magnetic coupling between Fe and V atoms is antiferromagnetic-like. We consider two cases, the first case correspond to non-interacting clusters, the distance between them is infinity, and the another case, when the clusters are interacting, the separation between them is finite; in the first case, the magnetic order in V{sub 6} is ferromagnetic-like whereas for V{sub 9} the magnetic order is antiferromagnetic-like, in the second case we have found that the magnetic order is not well stablished in V{sub 6}. We have found that the magnetic order in the matrix is not broken by the presence of the V atoms, although the local magnetic moments of Fe atoms at the interface cluster-matrix, are reduced respect to Fe bulk magnetization (2.22{mu} {sub B}) [e.g. {mu} {sub Fe}(5) = 1.98{mu} {sub B} in V{sub 6}; {mu} {sub Fe}(3) 1.89{mu} {sub B} in V{sub 9}].

Resolved resonance parameters for uranium 238 from 4 to 6 keV

International Nuclear Information System (INIS)

Olsen, D.K.; Meszaros, P.S.

1982-01-01

Neutron widths for 145 resonances from 4 to 6 keV are reported from a least-squares shape analysis of the ORELA 150-m, 4-sample 238 U transmission data. The resultant s-wave strength function from 4 to 6 keV is found to be substantially smaller than that from 0 to 4 keV

Key improvements in machining of Ti6al4v alloy: A review

Science.gov (United States)

Katta, Sivakoteswararao; Chaitanya, G.

2017-07-01

Now a days the use of ti-6al-4v alloy is high in demand in many industries like aero space, bio medical automobile, space, military etc. the production rates in the industries are not sufficient because the machiniability of ti-6al-4v is the main problem, there are several cutting tools available for metal cutting operations still there is a gap in finding the proper cutting tool material for machining of ti-6al-4v. because the properties of titanium like high heat resistant, low thermal conductivity, low weight ratio, less corrosiveness, and more many properties attracting the industrialists to use titanium as their material for their products, many researchers done the research on machininbility of ti-6al-4v by using different tool materials. but as for my literature survey there is still lot of scope is available, to find better cutting tool with techniques for machining ti-6al-4v. in this paper iam discussing the work done by various researchers on ti-6al-4v alloy with different techniques.

Botulinum toxin in preparation of oral cavity for microsurgical reconstruction.

Science.gov (United States)

Corradino, Bartolo; Di Lorenzo, Sara; Mossuto, Carmela; Costa, Renato Patrizio; Moschella, Francesco

2010-01-01

Infiltration of botulinum toxin in the major salivary glands allows a temporary reduction of salivation that begins 8 days afterwards and returns to normal within 2 months. The inhibition of salivary secretion, carried out before the oral cavity reconstructive surgery, could allow a reduction of the incidence of oro-cutaneous fistulas and local complications. Saliva stagnation is a risk factor for patients who have to undergo reconstructive microsurgery of the oral cavity, because of fistula formation and local complications in the oral cavity. The authors suggest infiltration of botulinum toxin in the major salivary glands to reduce salivation temporarily during the healing stage. During the preoperative stage, 20 patients with oral cavity carcinoma who were candidates for microsurgical reconstruction underwent sialoscintigraphy and a quantitative measurement of the salivary secretion. Injection of botulinum toxin was carried out in the salivary glands 4 days before surgery. The saliva quantitative measurement was repeated 3 and 8 days after infiltration, sialoscintigraphy after 15 days. In all cases, the saliva quantitative measurement revealed a reduction of 50% and 70% of the salivary secretion after 72 h and 8 days, respectively. A lower rate of local complications was observed.

Study of the gamma spectra emitted in a nuclear reaction - Measurement of the half-lives of the levels 6.13 MeV, 6.92 MeV and 7.12 MeV of 16O

International Nuclear Information System (INIS)

Leccia, F.

1967-01-01

When the energy shifts of the gamma spectrum released during a nuclear reaction are important compared with the detector resolution, the comparison of the experimental spectrum with theoretical spectra allows us to determine the half-life of the initial state of the transition. The calculation of the experimental spectrum implies to know the slowing-down of the recoil nucleus in the matter in order to take into account the Doppler effect. For recoil energies in the range of the MeV and for solid media, the Lindhard theory agrees well with experimental data. The phenomenon of deflection which appears at very low energies must be taken into account by restraining the measurement domain. By choosing an adequate media we can measure half-lives in the domain 1 and 100 fs without needing to take into account deflection effects. We have measured the half-life of the first 3 energy levels of 16 O (6.135 MeV, 6.923 MeV and 7.121 MeV), these levels are reached through the reaction 19 F(p,αγ) 16 O with proton incident energies ranging from 0.872 MeV to 2.42 MeV. We have used a coaxial germanium semi-conductor with lithium additions that was connected to an amplification line of Ortec type. 2 kinds of target have been used: calcium fluoride and copper fluoride evaporated on tantalum support. We have obtained the following values for the half-life: (16±4) fs for the 6.923 MeV level, (18±4) fs for the 7.121 MeV level, and for the 6.135 MeV we can only give a lower limit since the gamma decay occurs when the nucleus is at rest τ > 200 fs

Mastering vRealize operations manager analyze and optimize your it environment by gaining a practical understanding of vRealize operations 6.6

CERN Document Server

Kaloferov, Spas; Carnie, Alasdair; Norris, Scott

2018-01-01

Nowadays you can find companies that have virtualized 75%, or even more than 95% of their environment. Having a good forensic tool with comprehensive predictive analysis functionality, to monitor your virtual environment and software, is crucial. vRealize Operations 6.6 offers this and much more to help your business run uninterrupted.

Acceptability of oral typhoid vaccine in Thai children.

Science.gov (United States)

Mekmullica, Jutarat; Pancharoen, Chitsanu

2003-06-01

To determine the acceptability of oral typhoid vaccine to Thai children, 434 volunteers, aged 4-15 years (average age = 8.2 years), were assigned to take three capsules of oral typhoid vaccine (one capsule every other day). Success was defined as the subjects' being able to swallow all three capsules. Information concerning the subjects' level of education, eating habits, and ability to take medicines in a variety of preparations (syrups, tablets and capsules) was obtained. The overall success rate was 94.2%; the rates were 84.4%, 94.9%, and 100% in the age groups 4-6 years, 7-9 years, and 10-12 years respectively. The rates were 82%, 85.7%, 93.3%, 96.4%, 98.8%, 100% and 100% in the students of kindergarten 1, kindergarten 2, elementary grade 1, grade 2, grade 3, grade 4, and grade 5 respectively. There was a correlation between a child's prior ability to take tablets/capsules and his success in swallowing the oral typhoid vaccine.

Tribological investigations of surface treated Ti6Al4V

International Nuclear Information System (INIS)

Rueck, D.M.; Schminke, A.; Schmidt, H.; Soltani-Farshi, M.; Baumann, H.; Fink, U.; Richter, E.

1998-05-01

The tribological couple of the titanium alloy Ti6Al4V and ultrahigh molecular weight polyethylene (UHMWPE) is used for hip and knee joint prostheses. It is known that surface treatment of the titanium alloy Ti6Al4V by ion implantation of various elements can improve the wear behavior of such prostheses. The results of tribological tests, performed in Ringer solution with a ring-on-disc tester, show that oxygen in the implanted near surface region has a pronounced influence on the wear performance. Oxygen can be introduced into the surface by different mechanisms: either by direct implantation of oxygen ions or by indiffusion during the implantation of other elements like nitrogen or carbon at higher temperatures. The influence of the oxygen content in the near surface region of implanted and nonimplanted Ti6Al4V on the tribological performance is discussed in detail. (orig.)

An empirical-statistical model for laser cladding of Ti-6Al-4V powder on Ti-6Al-4V substrate

Science.gov (United States)

Nabhani, Mohammad; Razavi, Reza Shoja; Barekat, Masoud

2018-03-01

In this article, Ti-6Al-4V powder alloy was directly deposited on Ti-6Al-4V substrate using laser cladding process. In this process, some key parameters such as laser power (P), laser scanning rate (V) and powder feeding rate (F) play important roles. Using linear regression analysis, this paper develops the empirical-statistical relation between these key parameters and geometrical characteristics of single clad tracks (i.e. clad height, clad width, penetration depth, wetting angle, and dilution) as a combined parameter (PαVβFγ). The results indicated that the clad width linearly depended on PV-1/3 and powder feeding rate had no effect on it. The dilution controlled by a combined parameter as VF-1/2 and laser power was a dispensable factor. However, laser power was the dominant factor for the clad height, penetration depth, and wetting angle so that they were proportional to PV-1F1/4, PVF-1/8, and P3/4V-1F-1/4, respectively. Based on the results of correlation coefficient (R > 0.9) and analysis of residuals, it was confirmed that these empirical-statistical relations were in good agreement with the measured values of single clad tracks. Finally, these relations led to the design of a processing map that can predict the geometrical characteristics of the single clad tracks based on the key parameters.

Comparative study of efficacy, tolerability and compliance of oral iron preparations (iron edetate, iron polymatose complex) and intramuscular iron sorbitol in iron deficiency anaemia in children

International Nuclear Information System (INIS)

Afzal, M.; Qureshi, S.M.; Lutafullah, M.

2009-01-01

To compare the efficacy, tolerability and compliance of oral iron preparations(iron edetate and Iron polymaltose complex) with each other and with intramuscular iron sorbitol in iron deficiency anaemia in children. A Randomized Controlled Trial (RCT) was carried out at the Paediatric Department of Combined Military Hospital (CMH) from January 2006 to December 2007. In total 146 children, up to 12 years age having haemoglobin (Hb%) less than 8 gm% were included. They were randomly distributed into three groups. Group A(64 cases) received oral sodium iron edetate (SIE), Group B (40 cases) received oral iron polymaltose complex (IPC) and group C (42 cases) received intramuscular iron sorbitol (IS) in recommended dosages. Rise in Hb%>10 gm% was kept as desired target. Maximum duration of treatment planned was 2 weeks for parenteral iron (group C) and 12 weeks for oral iron (groups A and B). Haematological parameters- Hb%, mean corpuscular volume (MCV), mean corpuscular haemoglobin (MCH), mean corpuscular haemoglobin concentration (MCHC) were measured at induction followed at 2 weeks, 4 weeks, 8 weeks and 12 weeks after start of treatment. Compliance and drop out rates were determined on each visit. Data was analyzed using SPSS version 10. ANOVA was used to analyze difference in rise in Hb% at various intervals. Statistically significant increase in mean Hb%, MCV, MCHC after 02 weeks was observed in group C (IS). Rise in these parameters became significant in group A (SIE) and B (IPC) after 04 weeks. Persistent rise was observed in oral groups at 08 and 12 weeks. Rise in Hb% was much faster in group C (IS). It took 2 weeks to achieve mean Hb% > 10 gm% and compliance rate was 40.5%, while to achieve same target, duration required was 8 weeks in group A (SIE) and 12 weeks in group B (IPC) and compliance rate was 39% and 30% respectively. Adverse effects were much more common with group A (SIE) as compared to other two groups. Intramuscular iron sorbitol is a reliable and

Creep behavior of plasma carburized Ti-6Al-4V alloy

International Nuclear Information System (INIS)

Oliveira, Veronica Mara Cortez Alves de; Barboza, Miguel Justino Ribeiro; Silva, Mariane Capellari Leite da; Pinto, Catia Gisele; Suzuki, Paulo Atsushi; Machado, Joao Paulo B.

2010-01-01

This paper aims to evaluate the effect of plasma carburizing on the Ti-6Al-4V alloy submitted to creep tests. The results showed that the alloy Ti-6Al-4V had a hardness of 334 ± 18 HV. After treatment thermochemical by plasma, was observed the formation of a layer of average thickness of 1,5 μm and hardness of 809 ± 79 HV due to the presence of TiC phase identified by X-ray diffraction. The treatment increased the values of average roughness of 1,28 to 2,02 μm. The creep properties of carburized specimens were improved in comparison with those of the uncarburized Ti-6Al-4V alloy. (author)

Association of the Addition of Oral Antibiotics to Mechanical Bowel Preparation for Left Colon and Rectal Cancer Resections With Reduction of Surgical Site Infections.

Science.gov (United States)

Vo, Elaine; Massarweh, Nader N; Chai, Christy Y; Tran Cao, Hop S; Zamani, Nader; Abraham, Sherry; Adigun, Kafayat; Awad, Samir S

2018-02-01

Surgical site infections (SSIs) after colorectal surgery remain a significant complication, particularly for patients with cancer, because they can delay the administration of adjuvant therapy. A combination of oral antibiotics and mechanical bowel preparation (MBP) is a potential, yet controversial, SSI prevention strategy. To determine the association of the addition of oral antibiotics to MBP with preventing SSIs in left colon and rectal cancer resections and its association with the timely administration of adjuvant therapy. A retrospective review was performed of 89 patients undergoing left colon and rectal cancer resections from October 1, 2013, to December 31, 2016, at a single institution. A bowel regimen of oral antibiotics and MBP (neomycin sulfate, metronidazole hydrochloride, and magnesium citrate) was implemented August 1, 2015. Patients receiving MBP and oral antibiotics and those undergoing MBP without oral antibiotics were compared using univariate analysis. Multivariable logistic regression controlling for factors that may affect SSIs was used to evaluate the association between use of oral antibiotics and MBP and the occurrence of SSIs. Surgical site infections within 30 days of the index procedure and time to adjuvant therapy. Of the 89 patients (5 women and 84 men; mean [SD] age, 65.3 [9.2] years) in the study, 49 underwent surgery with MBP but without oral antibiotics and 40 underwent surgery with MBP and oral antibiotics. The patients who received oral antibiotics and MBP were younger than those who received only MBP (mean [SD] age, 62.6 [9.1] vs 67.5 [8.8] years; P = .01), but these 2 cohorts of patients were otherwise similar in baseline demographic, clinical, and cancer characteristics. Surgical approach (minimally invasive vs open) and case type were similarly distributed; however, the median operative time of patients who received oral antibiotics and MBP was longer than that of patients who received MBP only (391 minutes

Biocompatibility of Mg Ion Doped Hydroxyapatite Films on Ti-6Al-4V Surface by Electrochemical Deposition.

Science.gov (United States)

Lee, Kang; Choe, Han-Cheol

2016-02-01

In this study, we prepared magnesium (Mg) doped nano-phase hydroxyapatite (HAp) films on the TiO2 nano-network surface using electrochemical deposition method. Ti-6Al-4V ELI surface was anodized in 5 M NaOH solution at 0.3 A for 10 min. Nano-network TiO2 surface were formed by these anodization steps which acted as templates and anchorage for growth of the Mg doped HAp during subsequent pulsed electrochemical deposition process at 85 degrees C. The phase and morphologies of HAp deposits were influenced by the Mg ion concentration.

Oral omega-6 essential fatty acid treatment in contact lens associated dry eye.

OpenAIRE

Kokke, K. H.; Morris, J. A.; Lawrenson, J.

2008-01-01

Symptoms of dry eye are commonly reported in contact lens wearers and are a frequent cause of non-tolerance. The purpose of the present study is to evaluate the effects of oral treatment with particular omega-6 fatty acids in the form of evening primrose oil (EPO) on subjective symptoms, ocular surface signs and tear film characteristic in patients with contact lens associated dry eye.

Evaluation of synthetic zeolites as oral delivery vehicle for anti-inflammatory drugs

Directory of Open Access Journals (Sweden)

Elham Khodaverdi

2014-05-01

Full Text Available Objective(s: In this research, zeolite X and zeolite Y were used as vehicle to prepare intestine targeted oral delivery systems of indomethacin and ibuprofen. Materials and Methods: A soaking procedure was implemented to encapsulate indomethacin or ibuprofen within synthetic zeolites. Gravimetric methods and IR spectra of prepared formulations were used to assess drug loading efficiencies into zeolite structures. Scanning Electron Microscopy (SEM was also utilized to determine morphologies changes in synthetic zeolites after drug loading. At the next stage, dissolution studies were used to predict the in vivo performance of prepared formulations at HCl 0.1 N and PBS pH 6.5 as simulated gastric fluid (SGF and simulated intestine fluid (SIF, respectively. Results: Drug loadings of prepared formulations was determined between 24-26 % w/w. Dissolution tests at SGF were shown that zeolites could retain acidic model drugs in their porous structures and can be able to limit their release into the stomach. On the other hand, all prepared formulations completely released model drugs during 3 hr in simulated intestine fluid. Conclusion: Obtained results indicated zeolites could potentially be able to release indomethacin and ibuprofen in a sustained and controlled manner and reduced adverse effects commonly accompanying oral administrations of NSAIDs.

Preparation and characterization of solid oral dosage forms containing soy isoflavones

Directory of Open Access Journals (Sweden)

Stela R. de Oliveira

2013-02-01

Full Text Available Soy isoflavones have been extensively used for menopausal symptoms and prevention of hormone-related cancer, osteoporosis and cardiovascular diseases. Commercially available forms of isoflavones include supplements, capsules and tablets. However, the non-standardization of soy isoflavones extracts and different dissolution profiles of these solid dosage forms highlight the need of additional studies on the development of well characterized pharmaceutical dosage forms of isoflavones. In this work, immediate release oral tablets of soy isoflavones were obtained and evaluated. Genistein and daidzein, were the main constituents of the dried soy extract. Preparation of the tables was accomplished in a rotary tableting machine following either a dry mixture for direct compression or wet granulation with different excipients. Powder, granules and tablets were evaluated for several parameters, including flow properties, Carr and Hausner indexes, hardness, friability, disintegration time and drug release profile. Also, a fast and validated HPLC analytical method for both genistein and daidzein was developed. Formulations containing sodium croscarmellose and sodium dodecyl sulfate resulted in better flowability as indicated by the flow rate and angle of repose, faster disintegration time and immediate release dissolution profile.

Preparation and characterization of docetaxel self-nanoemulsifying powders (SNEPs): A strategy for improved oral delivery

Energy Technology Data Exchange (ETDEWEB)

Sunkavalli, Sharath; Eedara, Basanth Babu; Janga, Karthik Yadav; Velpula, Ashok; Jukanti, Raju; Bandari, Suresh [St. Peter' s Institute of Pharmaceutical Sciences, Warangal (India)

2016-03-15

Liquid self-nanoemulsifying drug delivery systems (L-SNEDDS) of docetaxel were prepared using varying ratios of Capmul PG 8 NF (oil), Cremophor EL (surfactant) and Transcutol-P (co-surfactant). The optimized L-SNEDDS (L{sub 11}) was transformed into self-nanoemulsifying powder (SNEP) by physical adsorption on to Neusilin US2 and evaluated for dissolution behavior, in vitro cytotoxicity and in vivo oral bioavailability. Optimized L-SNEDDS (L{sub 11}) composed of 50% of oil, 41.7% of surfactant and 8.3% co-surfactant produced stable emulsion with smaller globules (43±3 nm). In vitro dissolution studies showed the rapid drug release within 5min (95.42±1%) from SNEP{sub N}. In vitro cytotoxicity assessed by the MTT assay using MCF-7 human breast cancer cell lines revealed that L-SNEDDS significantly reduced the IC{sub 50} value and was 2.3 times lower than the pure docetaxel. Further, the oral bioavailability studies in male Wistar rats showed higher C{sub max} values following treatment with SNEP{sub N} (0.98±0.13 μg/mL) and L-SNEDDS (1.09± 0.06 μg/mL) compared to pure docetaxel (0.37±0.04 μg/mL).

Early transition to oral antibiotic therapy for community-acquired pneumonia: duration of therapy, clinical outcomes, and cost analysis.

Science.gov (United States)

Omidvari, K; de Boisblanc, B P; Karam, G; Nelson, S; Haponik, E; Summer, W

1998-08-01

Our objective was to compare therapeutic outcome and analyse cost-benefit of a 'conventional' (7-day course of i.v. antibiotic therapy) vs. an abbreviated (2-day i.v. antibiotic course followed by 'switch' to oral antibiotics) therapy for in-patients with community-acquired pneumonia (CAP). We used a multicenter prospective, randomized, parallel group with a 28 day follow-up, at the University-based teaching hospitals: The Medical Center of Louisiana in New Orleans, LA and hospitals listed in the acknowledgement. Ninety-five patients were randomized to receive either a 'conventional' course of intravenous antibiotic therapy with cefamandole 1 g i.v. every 6 h for 7 days (n = 37), or an abbreviated course of intravenous therapy with cefamandole (1 g i.v. every 6 h for 2 days) followed by oral therapy with cefaclor (500 mg every 8 h for 5 days). No difference was found in the clinical courses, cure rates, survival or the resolution of the chest radiograph abnormalities among the two groups. The mean duration of therapy (6.88 days for the conventional group compared to 7-30 days for the early oral therapy group) and the frequencies of overall symptomatic improvement (97% vs. 95%, respectively) were similar in both groups. Patients who received early oral therapy had shorter hospital stays (7.3 vs. 9.71 days, P = 0.01), and a lower total cost of care ($2953 vs. $5002, P < 0.05). It was concluded that early transition to an oral antibiotic after an abbreviated course of intravenous therapy in CAP is substantially less expensive and has comparable efficacy to conventional intravenous therapy. Altering physicians' customary management of hospitalized patients with CAP can reduce costs with no appreciable additional risk of adverse patient outcome.

Surface properties of Ti-6Al-4V alloy part I: Surface roughness and apparent surface free energy.

Science.gov (United States)

Yan, Yingdi; Chibowski, Emil; Szcześ, Aleksandra

2017-01-01

Titanium (Ti) and its alloys are the most often used implants material in dental treatment and orthopedics. Topography and wettability of its surface play important role in film formation, protein adhesion, following osseointegration and even duration of inserted implant. In this paper, we prepared Ti-6Al-4V alloy samples using different smoothing and polishing materials as well the air plasma treatment, on which contact angles of water, formamide and diiodomethane were measured. Then the apparent surface free energy was calculated using four different approaches (CAH, LWAB, O-W and Neumann's Equation of State). From LWAB approach the components of surface free energy were obtained, which shed more light on the wetting properties of samples surface. The surface roughness of the prepared samples was investigated with the help of optical profilometer and AFM. It was interesting whether the surface roughness affects the apparent surface free energy. It was found that both polar interactions the electron donor parameter of the energy and the work of water adhesion increased with decreasing roughness of the surfaces. Moreover, short time plasma treatment (1min) caused decrease in the surface hydrophilic character, while longer time (10min) treatment caused significant increase in the polar interactions and the work of water adhesion. Although Ti-6Al-4V alloy has been investigated many times, to our knowledge, so far no paper has been published in which surface roughness and changes in the surface free energy of the alloy were compared in the quantitative way in such large extent. This novel approach deliver better knowledge about the surface properties of differently smoothed and polished samples which may be helpful to facilitate cell adhesion, proliferation and mineralization. Therefore the results obtained present also potentially practical meaning. Copyright © 2016 Elsevier B.V. All rights reserved.

Continuous low-dose oral chemotherapy in recurrent and persistent carcinoma of cervix following chemoradiation: A comparative study between prolonged oral cyclophosphamide and oral etoposide

Directory of Open Access Journals (Sweden)

Upasana Baruah

2014-01-01

Full Text Available Aim: To compare the efficacy and toxicities of low-dose oral cyclophosphamide and oral etoposide in patients with persistent and recurrent cervical cancer with gross pelvic disease following full course of chemoradiation therapy. Materials and Methods: 30 patients with recurrent and persistent cervical cancer with gross pelvic disease were enrolled in this trial. The patients were randomly divided into two groups of 15 patients each with one group receiving low dose oral cyclophosphamide (100 mg/day and the other group receiving low-dose oral etoposide (50 mg/day. Results were statistically analysed by IBM SPSS Statistics 19. Results: Oral etoposide was not well tolerated with grade 2 neutropenia occurring in 33.3% and grade 3 neutropenia in 6.6% and thrombocytopenia occurring in 13.3%. Oral cyclophosphamide group on the other hand was better tolerated with none of the patients having thrombocytopenia and 6.6% patients having grade 2 neutropenia. There were two complete response (15.38% and one partial response at the end of study (7.6% in the cyclophosphamide group whereas there was no complete response and two partial response (16.6% in the oral etoposide group. Conclusion: Long-term, low-dose oral etoposide was found to be less tolerated without any significant effect with patients with persistent and recurrent cervical cancer with gross pelvic disease following full course of chemoradiation therapy in contrast to oral cyclophosphamide which was found to be effective and well-tolerated by the patients.

Preparation and properties of amylose complexes prepared from hexadecylamine and its hydrochloride salt

Science.gov (United States)

Amylose inclusion complexes were prepared from jet-cooked aqueous mixtures of high amylose corn starch and 1-hexadecylamine (HDA). Slow-cooling produced torus/disc-shaped spherulites, whereas aggregates of smaller spherulites were obtained by rapid-cooling in ice. The morphologies and 6(1)V x-ray ...

Strengthening mechanisms in Ti-6Al-4V/TiC composites

International Nuclear Information System (INIS)

Johnson, A.J. Wagoner; Kumar, K.S.; Briant, C.L.

2004-01-01

In this study, the compressive behavior of Ti-6Al-4V/TiC composites considered for ballistic applications was examined at strain rates of 0.1, 1.0, and 10 s-1. As little as 1 vol% of particulate TiC provided nearly a 25% increase in strength in Ti-6Al-4V/TiC composites over that of the monolithic Ti-6Al-4V, while subsequent additions of TiC did not provide proportional benefit. The mechanisms responsible for such a significant increase in strength were investigated for the first time in this study. Microscopy (optical, SEM, TEM) aided in identifying the possible strengthening mechanisms that are typically important to the strength of metal matrix composites. These mechanisms include grain size and subgrain size refinement and an increase in dislocation density, all of which can occur during processing. Two other important mechanisms are thermal mismatch strains and load transfer from the matrix to the particle; the contribution of these mechanisms to the strength of the composite was evaluated using the Eshelby approach. A quantitative comparison of the mechanisms listed clearly showed that none of them was responsible for the large increase in strength with only 1vol%TiC in Ti-6Al-4V. The results from this study show for the first time that carbon in solution is, by far, the most potent strengthening mechanism in the Ti-6Al-4V/TiC particulate composites

The prevalence of oral and peri-oral piercings in young adults: a systematic review.

Science.gov (United States)

Hennequin-Hoenderdos, N L; Slot, D E; Van der Weijden, G A

2012-08-01

To determine the prevalence of oral and/or peri-oral piercings in young adults based on a systematic review of the available literature. The MEDLINE-PubMed, Cochrane-CENTRAL and EMBASE databases were comprehensively searched through April 2012 to identify appropriate studies. The prevalence of oral and/or peri-oral piercings was evaluated in the general population, as well as by gender and by anatomical site. An independent screening of 1711 unique titles and abstracts resulted in 13 publications that met the eligibility criteria. In total, 11 249 participants (mean age, 20.6 years) were questioned and/or examined for oral and/or peri-oral piercings. In the studies that provided information concerning the presence of oral and/or peri-oral piercings, the prevalence varied from 0.8% to 12%, resulting in a mean prevalence of 5.2%. When examined based on anatomical site, the most common sites were the tongue (a prevalence of 5.6%), followed by the lip (1.5%). Oral piercings were more prevalent in women (5.6%) than men (1.6%). Among the populations that were studied, oral and/or peri-oral piercings were observed in a relatively small percentage (5.2%) of young adults. The prevalence was approximately four times higher among females when compared with males. On the basis of the literature, the tongue was the most common oral site for a piercing. Dental care professionals are in an ideal position to offer information regarding safe piercings and to provide advice regarding oral hygiene, aftercare and possible complications. © 2012 John Wiley & Sons A/S.

Synthetic surfactant- and cross-linker-free preparation of highly stable lipid-polymer hybrid nanoparticles as potential oral delivery vehicles.

Science.gov (United States)

Wang, Taoran; Xue, Jingyi; Hu, Qiaobin; Zhou, Mingyong; Chang, Chao; Luo, Yangchao

2017-06-05

The toxicity associated with concentrated synthetic surfactants and the poor stability at gastrointestinal condition are two major constraints for practical applications of solid lipid nanoparticles (SLN) as oral delivery vehicles. In this study, a synthetic surfactant-free and cross-linker-free method was developed to fabricate effective, safe, and ultra-stable lipid-polymer hybrid nanoparticles (LPN). Bovine serum albumin (BSA) and dextran varying in molecular weights were first conjugated through Maillard reaction and the conjugates were exploited to emulsify solid lipid by a solvent diffusion and sonication method. The multilayer structure was formed by self-assembly of BSA-dextran micelles to envelope solid lipid via a pH- and heating-induced facile process with simultaneous surface deposition of pectin. The efficiency of different BSA-dextran conjugates was systematically studied to prepare LPN with the smallest size, the most homogeneous distribution and the greatest stability. The molecular interactions were characterized by Fourier transform infrared and fluorescence spectroscopies. Both nano spray drying and freeze-drying methods were tested to produce spherical and uniform pectin-coated LPN powders that were able to re-assemble nanoscale structure when redispersed in water. The results demonstrated the promise of a synthetic surfactant- and cross-linker-free technique to prepare highly stable pectin-coated LPN from all natural biomaterials as potential oral delivery vehicles.

Knowledge and behaviour of parents in relation to the oral and dental health of children aged 4-6 years.

Science.gov (United States)

ElKarmi, R; Shore, E; O'Connell, A

2015-04-01

To evaluate baseline knowledge and behaviour of parents with regard to the oral and dental health of their young children. Following ethical approval, six urban and rural schools were identified. Questionnaires were distributed to the parents of pupils (children aged 4-6 years). The questionnaire included several questions evaluating parental knowledge and behaviour of oral and dental health issues in their children. Each question was assigned a score of either 0 or 1 being inconsistent or consistent with current paediatric guidelines giving a maximum score of 6 for knowledge and 7 for behaviour. Chi-square analysis was used to analyse associations among variables. Parental knowledge varied widely among parents and across questions; however, 70.2 % of parents had scores greater than 3 (range 0-6). The majority of parents (65.8 %) also had scores greater than 3 (range 0-7) for behaviour. Deficiencies were noted in oral hygiene practices; very few parents brushed their child's teeth and were not aware of the recommended age of the first dental visit at 1 year (Age 1 visit). Parents without free medical care demonstrated high levels of knowledge (P parents thought that the information available to them on the oral health of their young children was insufficient. Parents appeared to have limited knowledge regarding the dental and oral health of their young children. This study indicates a need for improved education for parents, particularly in toothbrushing behaviour and use of toothpaste. Education strategies tailored to the Irish population should be explored.

Biocorrosion of TiO{sub 2} nanoparticle coating of Ti–6Al–4V in DMEM under specific in vitro conditions

Energy Technology Data Exchange (ETDEWEB)

Höhn, Sarah, E-mail: sarah.hoehn@fau.de; Virtanen, Sannakaisa, E-mail: virtanen@ww.uni-erlangen.de

2015-02-28

Highlights: • Possibility to fabricate a TiO{sub 2} NP-coating on Ti–6Al–4V by a simple spin-coating method. • The NP-coating enhances biomimetic apatite formation on the surface immersed in DMEM. • The TiO{sub 2} coating can efficiently reduce Al release from the alloy during immersion in DMEM. • TiO{sub 2} NP-coating makes the surface more bioactive. - Abstract: A TiO{sub 2} nanoparticle coating was prepared on a biomedical Ti–6Al–4V alloy using “spin-coating” technique with a colloidal suspension of TiO{sub 2} nanopowders with the aim to optimize the surface morphology (e.g., roughness) for improved biocompatibility. The influence of a TiO{sub 2} nanoparticle (NP) coating on the corrosion behavior, metal ion release, and biomimetic apatite formation was studied in DMEM, at 37.5 °C with a continuous supply of 5% CO{sub 2}. Electrochemical impedance spectroscopy measurements indicate a formation of a new layer on the surface of the NP-coated sample upon 28 days immersion in DMEM. Scanning electron microscopy (SEM) and X-ray spectroscopy confirm that the surface of the NP-coated Ti–6Al–4V shows a complete coverage by a Ca–phosphate layer in contrast to the non-coated Ti–6Al–4V alloy. Hence, the TiO{sub 2}-NP coating strongly enhances biomimetic apatite formation on the alloy surface. In addition, the TiO{sub 2}-NP coating can efficiently reduce Al-release from the alloy, for which the bare Ti–6Al–4V alloy is significant for at least 28 days of immersion in DMEM.

THE EXON 5, 6, 7, 8 OF P53 MUTATIONS IN ORAL SQUAMOUS CELLS CARCINOMA

Directory of Open Access Journals (Sweden)

Retno P Rahayu

2012-04-01

Full Text Available Genetic instability may underlie the etiology of multistep carcinogenesis. The altered p53 gene observed in tumors may represent the expression of such instability and may allow the accumulation of other gene alterations caused by multiple mechanism. p53 gene is the guardian of the genome, that is why we pay more attention to this gene. In this study, we evaluated the significance of p53 mutation in 55 patient with oral squamous carcinoma. Thirty among them underwent well-differentiated carcinoma, while the remaining 25 patients underwent poorly differentiated carcinoma. The mutations were detected by PCR-SSCP (Single strand Conformational Polymorphism analysis in the region between exon 5 and exon 8. The results indicated that the p53 mutation in exon 5 (40%, exon 6 (28%, exon 7 (24% and exon 8 (8% were associated with poorly differentiated carcinoma, whereas mutation in exon 5 (10%, exon 6 (30%, exon 7 (40% and exon 8 (20% were associated with well-differentiated carcinoma. These observations suggest that p53 mutation in exon 5, 6, and 7 have strong correlation with poorly differentiated in oral squamous carcinoma while well-differentiated level was related with mutation in exon 6,7 and 8.

Preparation of Metal Immobilized Orange Waste Gel for Arsenic(V Removal From Water

Directory of Open Access Journals (Sweden)

Biplob Kumar Biswas

2014-05-01

Full Text Available Abstract - The toxicity of arsenic is known to be a risk to aquatic flora and fauna and to human health even in relatively low concentration. In this research an adsorption gel was prepared from agricultural waste material (orange waste through simple chemical modification in the view to remove arsenic (V from water. Orange waste was crushed into small particles and saponified with Ca(OH2 to prepare saponified orange waste, which was further modified by immobilizing gadolinium(III to obtain desired adsorption material (Gd(III-immobilized SOW gel. The effective pH range for arsenic adsorption was found to be 7.5 – 8.5. Adsorption capacity of the gel was evaluated to be 0.45 mol-arsenic (V/kg. Dynamic adsorption of arsenic (V in column-mode was conducted and a dynamic capacity was found to be 0.39 mol/kg. Elution of arsenate was tested after complete saturation of the column packed with gadolinium-immobilized orange waste adsorption gel. A complete elution of arsenate was achieved with the help of 1 M HCl and 28 times pre-concentration factor was attained. This study showed that a cheap and abundant agro-industrial waste material could be successfully employed for the remediation of arsenic pollution in aquatic environment. Keywords: Arsenic; Orange waste; Gadolinium(III; Adsorption; Elution.

Anti-inflammatory and healing action of oral gel containing borneol monoterpene in chemotherapy-induced mucositis in rats ( Rattus norvegicus

Directory of Open Access Journals (Sweden)

Braz José do Nascimento-Júnior

2017-07-01

Full Text Available ABSTRACT The aim of this study was to investigate the effect of gels containing the monoterpene borneol in induced oral mucositis using an animal model. Gels were prepared with borneol at 1.2% and 2.4% (w/w. Oral mucositis was induced by administration of three doses of 5-fluorouracil (30 mg/kg, i.p. and injury with acetic acid (50%, v/v soaked in filter paper applied to right cheek mucosa for 60s. Four subgroups comprising 12 animals each were formed. Six animals from each group were sacrificed at days seven and fourteen after oral mucositis induction. Mucous samples were processed and stained with hematoxylin-eosin and Masson’s Trichrome. The semiquantitative evaluation involved observation of inflammatory parameters. ImageJ® software was used in the quantitative evaluation. For statistical analyses, Two-way ANOVA, followed by Tukey’s post-test (p <0.05, were employed. Borneol 2.4% gel proved effective in the treatment of oral mucositis with statistically significant differences between groups for angiogenesis control, inflammatory cell count reduction and percentage neoformed collagen increase. The confirmation of anti-inflammatory and healing action of borneol in oral mucositis in rats renders it a good marker for predicting this activity for plant extracts rich in this substance.

Preparation and characterization of V/TiO{sub 2} nanocatalyst with magnetic nucleus of iron

Energy Technology Data Exchange (ETDEWEB)

Feyzi, Mostafa; Rafiee, Hamid Reza, E-mail: rafieehr@yahoo.com; Ranjbar, Shahram; Jafari, Fataneh; Safari, Banafsheh

2013-11-15

Graphical abstract: - Highlights: • Fe-V/TiO{sub 2} nanocatalyst is prepared. • Combination of sol–gel and wetness impregnation methods. • Facile separation of catalyst from medium by magnet. - Abstract: A magnetic composite containing V/TiO{sub 2} was prepared by combination of sol–gel and wetness impregnation methods. The effects of synthesis temperature, different weight percents of Fe supported on TiO{sub 2}, vanadium loading and the heating rate of calcination on the structure and morphology of nanocatalyst were investigated. The optimum conditions for synthesized catalyst were 40 wt.% of Fe, 15 wt.% of V and synthesis temperature equal to 30 °C. Characterization of catalyst is carried out using XRD, TGA, DSC, SEM, FTIR and N{sub 2} physisorption measurements. The magnetic character of nanocatalyst was measured using VSM, which showed the typical paramagnetic behavior of sample at room temperature with a saturation magnetization value equal to 8.283 emu/g. The nanocatalyst has a particle size about 56 nm and can easily be separated from medium by a magnet.

[Protective activity of S-PT84, a heat-killed preparation of Lactobacillus pentosus, against oral and gastric candidiasis in an experimental murine model].

Science.gov (United States)

Hayama, Kazumi; Ishijima, Sanae; Ono, Yoshiko; Izumo, Takayuki; Ida, Masayuki; Shibata, Hiroshi; Abe, Shigeru

2014-01-01

The effect of S-PT84, a heat-killed preparation of Lactobacillus pentosus on growth of Candida albicans was examined in vitro and in vivo. The mycelial growth was effectively inhibited by S-PT84 and seemed to bind to the hyphae. We assessed the potential of S-PT84 for treatment of oral and gastric candidiasis using a murine model. When 2 mg of S-PT84 was administered three times into the oral cavity of orally Candida infected mice, the score of lesions on the tongue was improved on day 2. When 50 μl and 200 μl of S-PT84 (10 mg/ml) were administered three times into the oral cavity (0.5 mg × 3) and the stomach (2 mg × 3) of the same mouse model, the number of viable Candida cells in the stomach was reduced significantly on day 2. These findings suggest the possibility that S-PT84 has potential as a food ingredient supporting anti-Candida treatment, especially for Candida infection in the gastrointestinal tract.

The Audi 3.0l TFSI - the new top-of-the-range V6 engine; Der Audi 3,0l TFSI - die neue V6 Spitzenmotorisierung

Energy Technology Data Exchange (ETDEWEB)

Fitzen, M.; Hatz, W.; Eiser, A.; Heiduk, T.; Riegner, J. [Audi AG, Ingolstadt (Germany)

2008-07-01

The 3.0l TFSI represents the new top-of-the-range V6 engine from Audi. In its basic form this engine design delivers 213 kW (290 bhp) and 420 Nm. The fundamental design of the engine has been adopted from the naturally aspirated V6 engines as revised in 2006, including the measures to reduce frictional losses. An entirely new development is the supercharger module, with integrated Roots blower, bypass regulation and charge air intercooling. All the components are accommodated inside the V. As a result of the extremely compact dimensions it has also been possible to adopt the arrangement of the inlet and exhaust systems directly from the naturally aspirated engines without any changes. In conjunction with direct injection, this sets new standards in terms of responsiveness, efficiency and noise levels. The new Audi V6 3.0l TFSI combines excellent torque and power output with outstanding responsiveness, along with the package and exhaust-related benefits of a naturally aspirated engine. That makes it ideally suitable for a wide range of applications within the Audi model portfolio. The initial launch of the engine will be in the new A6 for the autumn of 2008. (orig.)

Preparation, characterization, and optimization of primaquine-loaded solid lipid nanoparticles

Directory of Open Access Journals (Sweden)

Omwoyo WN

2014-08-01

Full Text Available Wesley Nyaigoti Omwoyo,1,2 Bernhards Ogutu,3,4 Florence Oloo,3,5 Hulda Swai,6 Lonji Kalombo,6 Paula Melariri,6 Geoffrey Maroa Mahanga,2 Jeremiah Waweru Gathirwa3,4 1Department of Chemistry, Maasai Mara University, Narok, Kenya; 2Department of Chemistry, Jaramogi Oginga Odinga University of Science and Technology, Bondo, Kenya; 3Center for Research in Therapeutic Sciences, Strathmore University, Nairobi, Kenya; 4Kenya Medical Research Institute, Nairobi, Kenya; 5Department of Chemical Sciences and Technology, Technical University of Kenya, Nairobi, Kenya; 6Department of Polymers and Composites, Council for Scientific and Industrial Research, Pretoria, South Africa Abstract: Primaquine (PQ is one of the most widely used antimalarial drugs and is the only available drug that combats the relapsing form of malaria. PQ use in higher doses is limited by severe tissue toxicity including hematological- and gastrointestinal-related side effects. Nanoformulation of drugs in an appropriate drug carrier system has been extensively studied and shown to have the potential to improve bioavailability, thereby enhancing activity, reducing dose frequency, and subsequently reducing toxicity. The aim of this work was to design, synthesize, and characterize PQ-loaded solid lipid nanoparticles (SLNs (PQ-SLNs as a potential drug-delivery system. SLNs were prepared by a modified solvent emulsification evaporation method based on a water-in-oil-in-water (w/o/w double emulsion. The mean particle size, zeta potential, drug loading, and encapsulation efficiency of the PQ-SLNs were 236 nm, +23 mV, 14%, and 75%, respectively. The zeta potential of the SLNs changed dramatically, from -6.54 mV to +23.0 mV, by binding positively charged chitosan as surface modifier. A spherical morphology of PQ-SLNs was seen by scanning electron microscope. In vitro, release profile depicted a steady drug release over 72 hours. Differential scanning calorimeter thermograms demonstrated presence

Study of reaction mechanisms in 40Ar+68Zn interaction at 14.6 and 27.6 MeV/N

International Nuclear Information System (INIS)

Rami, F.

1985-01-01

The competing mechanisms in the 40 Ar+ 68 Zn reaction have been investigated at two bombarding energies: 14.6 and 27.6 MeV/nucleon. Mass, charge and energy spectra of the reaction products have been measured in a large angular range (3 0 0 ). The results show that important changes occur in this energy region. At 14.6 MeV/nucleon the production of the projectile-like fragments results mainly from deep inelastic and direct nucleon transfer reactions; while at 27.6 MeV/nucleon a strong component corresponding to process similar to projectile fragmentation is also observed. A distinction between the fragmentation process and direct transfer of few nucleons has been possible by analysing the linear momentum distributions of the detected fragments. The energy dependance of the fusion cross section indicates that this process should disappear for incident energies E/A > approximately 30 MeV/nucleon. The maximum temperature reached by the compound nucleus has been deduced i.e. Tmax approximately equal 7 MeV; this value is in agreement with recent theoretical predictions [fr

Development of surface stabilized candesartan cilexetil nanocrystals with enhanced dissolution rate, permeation rate across CaCo-2, and oral bioavailability.

Science.gov (United States)

Jain, Sanyog; Reddy, Venkata Appa; Arora, Sumit; Patel, Kamlesh

2016-10-01

Candesartan cilexetil (CC), an ester prodrug of candesartan, is BCS class II drug with extremely low aqueous solubility limiting its oral bioavailability. The present research aimed to develop a nanocrystalline formulation of CC with improved saturation solubility in gastrointestinal fluids and thereby, exhibiting enhanced oral bioavailability. CC nanocrystals were prepared using a low energy antisolvent precipitation methodology. A combination of hydroxypropyl methylcellulose (HPMC) and Pluronic® F 127 (50:50 w/w) was found to be optimum for the preparation of CC nanocrystals. The particle size, polydispersity index (PDI), and zeta potential of optimized formulation was found to be 159 ± 8.1 nm, 0.177 ± 0.043, and -23.7 ± 1.02 mV, respectively. Optimized formulation was found to possess irregular, plate-like morphology as evaluated by scanning electron microscopy and crystalline as evaluated by differential scanning calorimetry (DSC) and X-ray powder diffraction (XRPD). A significant increase in saturation solubility and dissolution rate of the optimized nanosuspension was observed at all the tested pH conditions. Optimized CC nanocrystals exhibited a storage stability of more than 3 months when stored under cold and room temperature conditions. In vitro Caco-2 permeability further revealed that CC nanocrystals exhibited nearly 4-fold increase in permeation rate compared to the free CC. In vivo oral bioavailability studies of optimized CC nanocrystals in murine model revealed 3.8-fold increase in the oral bioavailability and twice the C max as compared with the free CC when administered orally. In conclusion, this study has established a crystalline nanosuspension formulation of CC with improved oral bioavailability in murine model. Graphical Abstract Antisolvent precipitation methodology for the preparation of Candesartan Cilexetil nanocrystals for enhanced solubility and oral bioavailability.

Oral Health Status Among 6- and 12-year-old Jordanian Schoolchildren

DEFF Research Database (Denmark)

Rajab, Lamis Darwish; Petersen, Poul Erik; Baqain, Zaid

2014-01-01

of caries and the need for dental care. Materials and Methods: A cross-sectional epidemiological survey was carried out which included 2496 children aged 6 years and 2560 children aged 12 years selected by stratified cluster sampling. Children were examined in schools and data comprised information about...... caries and gingival health status. WHO methodology and criteria were applied. Structured questionnaires were used to collect information about oral hygiene, dental visits, consumption of sugars and parents' level of education. Results: The caries prevalence rates were 76.4% in 6-year-olds and 45.5% in 12...... and fewer filled teeth than did children of the upper socioeconomic group. Multivariate regression analysis showed that social class was the most important independent variable for caries. The results from 2005 were compared with similar data collected in the capital, Amman, in 1993. For all social classes...

In-vivo degradation mechanism of Ti-6Al-4V hip joints

DEFF Research Database (Denmark)

Lomholt, Trine Colding; Pantleon, Karen; Somers, Marcel A. J.

2011-01-01

In-vivo exposed Ti-6Al-4V implants were investigated to determine the degradation mechanism occurring during the articulating movements of the hip joint in the human body. Failed implants were compared to Ti-6Al-4V samples, which were tested in the laboratory for their tribocorrosion performance....... The results strongly indicate that degradation of Ti-6Al-4V has occurred with the same mechanism for both the implants and the laboratory tested samples and, hence, block-on-ring tribocorrosion testing was found to be a useful tool for mimicking the degradation occurring in the body.The degradation mechanism...

V-set and Ig domain-containing 4 (VSIG4)-expressing hepatic F4/80+ cells regulate oral antigen-specific responses in mouse.

Science.gov (United States)

Shin, Wonhwa; Jeon, Youkyoung; Choi, Inhak; Kim, Yeon-Jeong

2018-04-01

Oral tolerance can prevent unnecessary immune responses against dietary antigens. Members of the B7 protein family play critical roles in the positive and/or negative regulation of T cell responses to interactions between APCs and T cells. V-set and Ig domain-containing 4 (VSIG4), a B7-related co-signaling molecule, has been known to act as a co-inhibitory ligand and may be critical in establishing immune tolerance. Therefore, we investigated the regulation of VSIG4 signaling in a food allergy and experimental oral tolerance murine models. We analyzed the contributions of the two main sites involved in oral tolerance, the mesenteric lymph node (MLN) and the liver, in VSIG4-mediated oral tolerance induction. Through the comparative analysis of major APCs, dendritic cells (DCs) and macrophages, we found that Kupffer cells play a critical role in inducing regulatory T cells (Tregs) and establishing immune tolerance against oral antigens via VSIG4 signaling. Taken together, these results suggest the possibility of VSIG4 signaling-based regulation of orally administered antigens. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Laser fabrication of Ag-HA nanocomposites on Ti6Al4V implant for enhancing bioactivity and antibacterial capability

Energy Technology Data Exchange (ETDEWEB)

Liu, Xiangmei; Man, H.C., E-mail: mfhcman@polyu.edu.hk

2017-01-01

For titanium alloy implants, both surface bioactivity and antibacterial infection are the two critical factors in determining the success of clinical implantation of these metallic implants. In the present work, a novel nanocomposite layer of nano-silver-containing hydroxyapatite (Ag-HA) was prepared on the surface of biomedical Ti6Al4V by laser processing. Analysis using SEM, EDS and XRD shows the formation of an Ag-HA layer of about 200 μm fusion bonded to the substrate. Mineralization tests in simulated body fluid (SBF) showed that laser fabricated Ag-HA nanocomposite layer favors the deposition of apatite on the surface of the implants. Antibacterial tests confirmed that all Ag-HA nanocomposite layers can kill bacteria while a higher Ag content would lower the cytocompatibility of these coatings. Cell viability decreases when the Ag content reaches 5% in these coatings, due to the larger amount of Ag leached out, as confirmed by ion release evaluation. Our results reveal that laser fabricated Ag-HA nanocomposite coatings containing 2% Ag show both excellent cytocompatibility and antibacterial capability. - Highlights: • Silver-containing hydroxyapatite (Ag-HA) nanocomposite layer was fabricated on Ti6Al4V by laser technique. • Both bioactivity and antibacterial capability were significantly enhanced compared with bare Ti6Al4V. • Ag-HA nanocomposite coatings containing 2% Ag show both excellent cytocompatibility and antibacterial capability.

The preparation for an instant kit of 99mTc(V) DMSA as a tumor-seeking imaging agent and animal experimentation

International Nuclear Information System (INIS)

Li Yunlong; Li Hongyu; Jing Hui; Guo Hongyuan; Liu Yingmei; Zhao Hui

1997-10-01

A method for preparing an instant kit of 99m Tc(V) DMSA was described. The effect of pH on labelling efficiency of the kit was investigated. 99m Tc(V) DMSA was characterized by TLC on silica-gel sheets, eluting with n-butanol: acetic acid: water = 3:2:3 (volume ratio). Radiochemical purity and stability of 99m Tc(V) DMSA in vitro were studied. The results clearly demonstrated that the yield of 99m Tc(V) DMSA was more than 95% at pH 8∼8.5 and the agent was stable in 3 h at room temperature. Effect of temperature, moisture and luminosity on the stability of the freeze-dried kit were considered. The biological distributions of 99m Tc(V) DMSA were measured in mice bearing tumor S180. The results indicated that during 1∼6 h after i.v. injection, 99m Tc(V) DMSA was highly up taken in tumor tissue, the ratios of tumor: muscle and tumor: bone were in the ranges of 1.4∼2.4 and 1.2∼1.8, respectively. This peculiarity indicated that 99m Tc(V) DMSA has tumor-seeking property and could be used as a tumor-seeking imaging agent. (9 refs., 11 tabs.)

Physiologic effects of bowel preparation

DEFF Research Database (Denmark)

Holte, Kathrine; Nielsen, Kristine Grubbe; Madsen, Jan Lysgård

2004-01-01

healthy volunteers (median age, 63 years) underwent bowel preparation with bisacodyl and sodium phosphate. Fluid and food intake were standardized according to weight, providing adequate calorie and oral fluid intake. Before and after bowel preparation, weight, exercise capacity, orthostatic tolerance...

Sample preparation composite and replicate strategy case studies for assay of solid oral drug products.

Science.gov (United States)

Nickerson, Beverly; Harrington, Brent; Li, Fasheng; Guo, Michele Xuemei

2017-11-30

Drug product assay is one of several tests required for new drug products to ensure the quality of the product at release and throughout the life cycle of the product. Drug product assay testing is typically performed by preparing a composite sample of multiple dosage units to obtain an assay value representative of the batch. In some cases replicate composite samples may be prepared and the reportable assay value is the average value of all the replicates. In previously published work by Harrington et al. (2014) [5], a sample preparation composite and replicate strategy for assay was developed to provide a systematic approach which accounts for variability due to the analytical method and dosage form with a standard error of the potency assay criteria based on compendia and regulatory requirements. In this work, this sample preparation composite and replicate strategy for assay is applied to several case studies to demonstrate the utility of this approach and its application at various stages of pharmaceutical drug product development. Copyright © 2017 Elsevier B.V. All rights reserved.

Coinfection with Epstein–Barr Virus (EBV, Human Papilloma Virus (HPV and Polyoma BK Virus (BKPyV in Laryngeal, Oropharyngeal and Oral Cavity Cancer

Directory of Open Access Journals (Sweden)

Bartłomiej Drop

2017-12-01

Full Text Available Most research providing evidence for the role of oncogenic viruses in head and neck squamous cell carcinoma (SCC development is focused on one type of virus without analyzing possible interactions between two or more types of viruses. The aim of this study was to analyse the prevalence of co-infection with human papillomavirus (HPV, Epstein–Barr virus (EBV and polyoma BK virus (BKPyV in oral, oropharyngeal and laryngeal squamous cell carcinomas in Polish patients. The correlations between viral infection, SCC, demographic parameters, evidence of metastases and grading were also investigated. Fresh-frozen tumour tissue samples were collected from 146 patients with laryngeal, oropharyngeal and oral cancer. After DNA extraction, the DNA of the studied viruses was detected using polymerase chain rection (PCR assay. Males (87.7% with a history of smoking (70.6% and alcohol abuse (59.6% prevailed in the studied group. Histological type G2 was recognized in 64.4% cases. The patients were most frequently diagnosed with T2 stage (36.3% and with N1 stage (45.8%. Infection with at least two viruses was detected in 56.2% of patients. In this group, co-infection with HPV/EBV was identified in 34.1% of cases, EBV/BKV in 23.2%, HPV/BKV in 22.0%, and HPV/EBV/BKV in 20.7%. No difference of multiple infection in different locations of cancer was observed. The prevalence of poorly differentiated tumours (G3 was more frequent in co-infection with all three viruses than EBV or BKV alone. A significant correlation was observed between tumour dimensions (T and lymph-node involvement (N in co-infected patients compared to single infection. Further studies are necessary to clarify whether co-infection plays an important role in the initiation and/or progression of oncogenic transformation of oral, oropharyngeal and laryngeal epithelial cells.

Coinfection with Epstein-Barr Virus (EBV), Human Papilloma Virus (HPV) and Polyoma BK Virus (BKPyV) in Laryngeal, Oropharyngeal and Oral Cavity Cancer.

Science.gov (United States)

Drop, Bartłomiej; Strycharz-Dudziak, Małgorzata; Kliszczewska, Ewa; Polz-Dacewicz, Małgorzata

2017-12-19

Most research providing evidence for the role of oncogenic viruses in head and neck squamous cell carcinoma (SCC) development is focused on one type of virus without analyzing possible interactions between two or more types of viruses. The aim of this study was to analyse the prevalence of co-infection with human papillomavirus (HPV), Epstein-Barr virus (EBV) and polyoma BK virus (BKPyV) in oral, oropharyngeal and laryngeal squamous cell carcinomas in Polish patients. The correlations between viral infection, SCC, demographic parameters, evidence of metastases and grading were also investigated. Fresh-frozen tumour tissue samples were collected from 146 patients with laryngeal, oropharyngeal and oral cancer. After DNA extraction, the DNA of the studied viruses was detected using polymerase chain rection (PCR) assay. Males (87.7%) with a history of smoking (70.6%) and alcohol abuse (59.6%) prevailed in the studied group. Histological type G2 was recognized in 64.4% cases. The patients were most frequently diagnosed with T2 stage (36.3%) and with N1 stage (45.8%). Infection with at least two viruses was detected in 56.2% of patients. In this group, co-infection with HPV/EBV was identified in 34.1% of cases, EBV/BKV in 23.2%, HPV/BKV in 22.0%, and HPV/EBV/BKV in 20.7%. No difference of multiple infection in different locations of cancer was observed. The prevalence of poorly differentiated tumours (G3) was more frequent in co-infection with all three viruses than EBV or BKV alone. A significant correlation was observed between tumour dimensions (T) and lymph-node involvement (N) in co-infected patients compared to single infection. Further studies are necessary to clarify whether co-infection plays an important role in the initiation and/or progression of oncogenic transformation of oral, oropharyngeal and laryngeal epithelial cells.

Coinfection with Epstein–Barr Virus (EBV), Human Papilloma Virus (HPV) and Polyoma BK Virus (BKPyV) in Laryngeal, Oropharyngeal and Oral Cavity Cancer

Science.gov (United States)

Drop, Bartłomiej; Strycharz-Dudziak, Małgorzata; Kliszczewska, Ewa; Polz-Dacewicz, Małgorzata

2017-01-01

Most research providing evidence for the role of oncogenic viruses in head and neck squamous cell carcinoma (SCC) development is focused on one type of virus without analyzing possible interactions between two or more types of viruses. The aim of this study was to analyse the prevalence of co-infection with human papillomavirus (HPV), Epstein–Barr virus (EBV) and polyoma BK virus (BKPyV) in oral, oropharyngeal and laryngeal squamous cell carcinomas in Polish patients. The correlations between viral infection, SCC, demographic parameters, evidence of metastases and grading were also investigated. Fresh-frozen tumour tissue samples were collected from 146 patients with laryngeal, oropharyngeal and oral cancer. After DNA extraction, the DNA of the studied viruses was detected using polymerase chain rection (PCR) assay. Males (87.7%) with a history of smoking (70.6%) and alcohol abuse (59.6%) prevailed in the studied group. Histological type G2 was recognized in 64.4% cases. The patients were most frequently diagnosed with T2 stage (36.3%) and with N1 stage (45.8%). Infection with at least two viruses was detected in 56.2% of patients. In this group, co-infection with HPV/EBV was identified in 34.1% of cases, EBV/BKV in 23.2%, HPV/BKV in 22.0%, and HPV/EBV/BKV in 20.7%. No difference of multiple infection in different locations of cancer was observed. The prevalence of poorly differentiated tumours (G3) was more frequent in co-infection with all three viruses than EBV or BKV alone. A significant correlation was observed between tumour dimensions (T) and lymph-node involvement (N) in co-infected patients compared to single infection. Further studies are necessary to clarify whether co-infection plays an important role in the initiation and/or progression of oncogenic transformation of oral, oropharyngeal and laryngeal epithelial cells. PMID:29257122

A school-based oral health educational program: the experience of Maringa- PR, Brazil.

Science.gov (United States)

Conrado, Carlos Alberto; Maciel, Sandra Mara; Oliveira, Márcia Regina

2004-03-01

The main purpose of this study was to evaluate the preliminary results of a school-based oral health educational strategy adopted in public primary schools from the city of Maringa, State of Parana, Brazil. The study sample was composed by 556 children and adolescents aged 6 to 17 years old, 124 schoolteachers and a group of 55 mothers. The educational approach was implemented for 18 months and consisted of reinforcements of interventions addressed to students and schoolteachers at school level and few activities targeted at the mothers, performed by means of home visits. Baseline and follow-up interviews focused on oral health care were undertaken for the entire study population. As a stimulus for the students to achieve proper oral hygiene habits, the simplified oral hygiene index was assessed at three different moments. A statistically significant improvement in their oral hygiene index (pstudied. They also point out the need of intensifying the preparation of schoolteachers in oral health topics, as well the instructions to the mothers for their oral health care. Moreover, they highlight the importance of the continuous implementation of school-based programs to promote the oral health.

Proton irradiation studies on pure Ti and Ti-6Al-4V

Energy Technology Data Exchange (ETDEWEB)

Dutta Gupta, A. [Variable Energy Cyclotron Centre, HBNI, 1/AF Bidhannagar, Kolkata (India); Mukherjee, P., E-mail: paramita@vecc.gov.in [Variable Energy Cyclotron Centre, HBNI, 1/AF Bidhannagar, Kolkata (India); Gayathri, N.; Bhattacharyya, P.; Bhattacharya, M. [Variable Energy Cyclotron Centre, HBNI, 1/AF Bidhannagar, Kolkata (India); Sarkar, Apu [Materials Group, Bhabha Atomic Research Centre, Mumbai (India); Sen, S. [Mechanical Engineering, Jadavpur University, Kolkata (India); Mitra, M.K. [Metallurgical and Materials Engineering, Jadavpur University, Kolkata (India)

2016-11-15

Post irradiated microstructural characterisation of pure Ti and Ti-6Al-4V has been done as a function of dose using different model based techniques of X-ray diffraction line profile analysis. There is a systematic change of domain size for both the materials with dose but the microstrain within the domain remains almost unaltered. The domain size appears to be lower for pure Ti at all doses as compared to Ti-6Al-4V alloy. XRD peaks became highly asymmetric particularly at a dose of 5 × 10{sup 21} p/m{sup 2} for Ti-6Al-4V samples which is not observed for pure Ti at the same dose. This may be attributed to the segregation of alloying elements as a result of irradiation. Microhardness values increases with dose for pure Ti and then saturates at higher doses whereas microhardness values are found to decrease at higher doses for Ti-6Al-4V.

Influences of argon gas shielding on diffusion bonding of Ti-6Al-4V alloy to aluminum

International Nuclear Information System (INIS)

Akcaa, A.; Gursela, A.

2017-01-01

This study presents a diffusion bonding process of commercially pure aluminum to Ti-6Al-4V alloy. Prepared samples were exposed to temperature of 560, 600 and 640 °C for the bonding time of 30, 45 and 60 min at the atmosphere of argon gas and non-argon. Diffusion bonding is a dissimilar metal welding process which can be applied to the materials without causing any physical deformations. The processed samples were also metallographically prepared, optically examined followed by Vickers microhardness test in order to determine joint strength. Scanning Electron Microscopy (SEM) and Energy Dispersive Spectroscopy (EDS) were used in this work to investigate the compositional changes in order to observe the influence of atmosphere shielding in the transition zone. The result of tests and analyses were tried to be compared with the effect of argon shielding. The significant influences have been observed in the argon shielding during diffusion bonding process. [es

Multi-crystal native SAD analysis at 6 keV.

Science.gov (United States)

Liu, Qun; Guo, Youzhong; Chang, Yanqi; Cai, Zheng; Assur, Zahra; Mancia, Filippo; Greene, Mark I; Hendrickson, Wayne A

2014-10-01

Anomalous diffraction signals from typical native macromolecules are very weak, frustrating their use in de novo structure determination. Here, native SAD procedures are described to enhance signal to noise in anomalous diffraction by using multiple crystals in combination with synchrotron X-rays at 6 keV. Increased anomalous signals were obtained at 6 keV compared with 7 keV X-ray energy, which was used for previous native SAD analyses. A feasibility test of multi-crystal-based native SAD phasing was performed at 3.2 Å resolution for a known tyrosine protein kinase domain, and real-life applications were made to two novel membrane proteins at about 3.0 Å resolution. The three applications collectively serve to validate the robust feasibility of native SAD phasing at lower energy.

A new HCV genotype 6 subtype designated 6v was confirmed with three complete genome sequences.

Science.gov (United States)

Wang, Yizhong; Xia, Xueshan; Li, Chunhua; Maneekarn, Niwat; Xia, Wenjie; Zhao, Wenhua; Feng, Yue; Kung, Hsiang Fu; Fu, Yongshui; Lu, Ling

2009-03-01

Although hepatitis C virus (HCV) genotype 6 is classified into 21 subtypes, 6a-6u, new variants continue to be identified. To characterize the full-length genomes of three novel HCV genotype 6 variants: KMN02, KM046 and KM181. From sera of patients with HCV infection, the entire HCV genome was amplified by RT-PCR followed by direct DNA sequencing and phylogenetic analysis. The sera contained HCV genomes of 9461, 9429, and 9461nt in length, and each harboured a single ORF of 9051nt. The genomes showed 95.3-98.1% nucleotide similarity to each other and 72.2-75.4% similarity to 23 genotype 6 reference sequences, which represent subtypes 6a-6u and unassigned variants km41 and gz52557. Phylogenetic analyses demonstrated that they were genotype 6, but were subtypically distinct. Based on the current criteria of HCV classification, they were designed to represent a new subtype, 6v. Analysis of E1 and NS5B region partial sequences revealed two additional related variants, CMBD-14 and CMBD-86 that had been previously reported in northern Thailand and sequences dropped into Genbank. Three novel HCV genotype 6 variants were entirely sequenced and designated subtype 6v.

Microstructures, mechanical, and biological properties of a novel Ti-6V-4V/zinc surface nanocomposite prepared by friction stir processing

Directory of Open Access Journals (Sweden)

Zhu C

2018-03-01

Full Text Available Chenyuan Zhu,1,2,* Yuting Lv,3,4,* Chao Qian,1,2,* Zihao Ding,3,5 Ting Jiao,1,2 Xiaoyu Gu,1,2 Eryi Lu,6 Liqiang Wang,3 Fuqiang Zhang1,2 1Department of Prosthodontics, Ninth People’s Hospital, Shanghai Jiao Tong University School of Medicine, 2Shanghai Key Laboratory of Stomatology, Shanghai Research Institute of Stomatology, National Clinical Research Center of Stomatology, 3State Key Laboratory of Metal Matrix Composites, Shanghai Jiao Tong University, Shanghai, 4College of Mechanical and Electronic Engineering, Shandong University of Science and Technology, Qingdao, People’s Republic of China; 5Department of Materials Science and Engineering, Carnegie Mellon University, Pittsburgh, PA, USA; 6Department of Stomatology, Ren Ji Hospital, Shanghai Jiao Tong University School of Medicine, Shanghai, People’s Republic of China *These authors contributed equally to this work Background: The interaction between the material and the organism affects the survival rate of the orthopedic or dental implant in vivo. Friction stir processing (FSP is considered a new solid-state processing technology for surface modification. Purpose: This study aims to strengthen the surface mechanical properties and promote the osteogenic capacity of the biomaterial by constructing a Ti-6Al-4V (TC4/zinc (Zn surface nanocomposites through FSP. Methods: FSP was used to modify the surface of TC4. The microstructures and mechanical properties were analyzed by scanning electron microscopy, transmission electron microscopy, nanoindentation and Vickers hardness. The biological properties of the modified surface were evaluated by the in vitro and in vivo study. Results: The results showed that nanocrystalline and numerous β regions, grain boundary a phase, coarser acicular α phase and finer acicular martensite α' appeared because of the severe plastic deformation caused by FSP, resulting in a decreased elastic modulus and an increased surface hardness. With the addition of

High Expression of Osteopontin and CD44v6 in Odontogenic Keratocysts

Directory of Open Access Journals (Sweden)

Yi-Ping Wang

2009-04-01

Conclusion: Binding of OPN to osteoclast cell membrane receptor integrin αv can activate the osteoclasts and increase their osteolytic activity. In addition, binding of OPN to OKC lining epithelial cell membrane receptor CD44v6 can enhance the motility, migration, invasion and spread of lining epithelial cells into the surrounding cancellous bone. Therefore, we suggest that the local aggressive behavior and high osteolytic ability of OKCs in the jawbone can be explained at least partially by high expression of OPN and CD44v6 in lining epithelial cells of OKCs and high expression of integrin αv in osteoclasts.

Comparison of LiV3O8 cathode materials prepared by different methods

DEFF Research Database (Denmark)

West, Keld; Zachau-Christiansen, Birgit; Skaarup, Steen

1996-01-01

Lithium trivanadate, LiV3O8, can be prepared in a finely dispersed form by dehydration of aqueous lithium vanadate gels. Two methods of dehydration, both easily adaptable to large-scale production, are described in this work: freeze drying and spray drying. After heat-treatment of the dried gels ...... is demonstrated as well as the electrochemical properties of the vanadium oxide....

Comparação da eficácia de doses iguais de acetaminofeno retal e oral em crianças Comparison of antipyretic effectiveness of equal doses of rectal and oral acetaminophen in children

Directory of Open Access Journals (Sweden)

Sedigha Akhavan Karbasi

2010-06-01

Full Text Available OBJETIVO: Comparar uma dose de acetaminofeno oral e retal e avaliar a aceitabilidade do acetaminofeno retal, uma vez que o acetaminofeno oral e retal é amplamente usado como agente antipirético em crianças com febre e a eficiência comparativa dessas duas preparações não está bem estabelecida. MÉTODOS: Neste estudo prospectivo de grupos paralelos, foram incluídas 60 crianças admitidas na emergência ou clínica ambulatorial pediátrica em um hospital terciário, com idade entre 6 meses e 6 anos e com temperatura retal acima de 39 °C. Os pacientes foram distribuídos aleatoriamente em dois grupos de mesmo tamanho. O grupo 1 recebeu 15 mg/kg de acetaminofeno retal, e o grupo 2 recebeu a mesma dose oralmente. A temperatura foi registrada no tempo zero e 1 e 3 horas após administração da droga. RESULTADOS: No primeiro grupo, a redução média de temperatura, 1 e 3 horas após administração do acetaminofeno, foi de 1,07±0,16 (p 0,05. CONCLUSÃO: As preparações oral e retal de acetaminofeno têm eficácia antipirética equivalente em crianças. A via retal mostrou ser tão aceitável quanto a oral entre os pais.OBJECTIVE: To compare a dose of oral and rectal acetaminophen and to evaluate acceptability of rectal acetaminophen, since oral and rectal acetaminophen is widely used as an antipyretic agent in febrile children and the comparative effectiveness of these two preparations is not well established. METHODS: In this prospective parallel group designed study, 60 children who presented to the emergency department or outpatient pediatric clinic at a tertiary hospital and aged from 6 months to 6 years with rectal temperature over 39 °C were enrolled. Patients were randomly assigned to two equal-sized groups. Group 1 received 15 mg/kg acetaminophen rectally and group 2 received the same dose orally. Temperature was recorded at baseline and 1 and 3 hours after drug administration. RESULTS: In the first group, mean decrease in

Trasplante de mucosa oral en la reconstrucción de las vías lagrimales Oral mucosa transplants in restoration of lacrimal canaliculi

Directory of Open Access Journals (Sweden)

Bernardo Canto Vidal

2000-06-01

Full Text Available Se realizaron 143 intervenciones de las vías lagrimales, mediante la técnica quirúrgica de trasplante de mucosa oral con 55 injertos libres y 88 tubulares, a partir del año 1995. Para ello se tuvo en cuenta el examen clínico y radiológico y el tipo de afectación. Con la utilización de las técnicas de injerto libre o tubular de la mucosa se puede restablecer la fisiología lagrimal en los pacientes con mutilaciones por traumatismos o presencia de tumores con disminución del riesgo quirúrgico; además se recomienda por novedosa, práctica y por los buenos resultados obtenidos.143 interventions of lacrimal canaliculi were carried out, throgh surgical technique of oral mucosa transplant (55 free grafts and 88 tutular ones since 1995, bearing in min radiological and clinical examination and type of invelvement. Using technique of free or tubular graft, it is possible restore lacrimal physiology in patients with mutilations from trauma or prevence of tumors thus decreasing surgical risk; this tachnique is recommended by its novelty, usefulness . and by good results obtained.

Preparation and characterization of some pyridine-2,6-dicarboxylato thorium(IV) complexes

Energy Technology Data Exchange (ETDEWEB)

Degetto, S; Baracco, L [Consiglio Nazionale delle Ricerche, Padua (Italy). Lab. di Chimica e Tecnologia dei Radioelementi; Graziani, R [Padua Univ. (Italy). Istituto di Chimica Generale ed Inorganica; Celon, E [Padua Univ. (Italy). Istituto di Chimica Organica

1978-12-01

The preparation of complexes of pyridine-2,6-dicarboxylic acid (H/sub 2/PDC) with thorium(IV) is reported and discussed. The reactivity of Th(PDC)/sub 2/(H/sub 2/O)/sub 4/ was tested by preparing adducts with some neutral ligands. The complexes were characterized by i.r. spectroscopy, elemental analysis and thermal behaviour. Preliminary information on the structure obtained by x-ray analysis is also reported.

Material characteristic of Ti alloy (Ti-6Al-4V)

International Nuclear Information System (INIS)

Toyoshima, Noboru

1997-03-01

In regard to material characteristic of Ti alloy (Ti-6Al-4V), the following matters are provided by experiments. 1) In high temperature permeation behavior of implanted deuterium ion (0.5keV, 6.4 x 10 18 D + ions/m 2 s, ∼760deg K), the ratio of permeation flux to incident flux ranges from 3.3 x 10 -3 at 633deg K to 4.8 x 10 -3 at 753deg K. The activation energy of permeation is 0.12eV in this temperature region above 600deg K. At temperatures below 600deg K, the permeation flux of deuterium decreases drastically and the implanted ions remain in the alloy. 2) Radioactivation analysis using 14MeV fast neutron shows that Ti-6Al-4V alloy contains higher values of principal ingredients, Al, V, Fe, than that recorded at the chemical composition of Ti alloy, and also, contains impurities with Ni, Co and Mn. 3) Fraction of about 0.095wt% H 2 were absorbed in the test specimens, and tensile strength test was carried out. Under the condition of the hydrogen pressure 50 torr and temperature ∼500degC. The results show that there is no degradation in mechanical properties for absorption of with less than 0.04wt% H 2 . The tensile strength of wilding specimens have almost the same as that without wilding. Ti alloy, as a material of vacuum vessel of nuclear fusion device, must be selected to that with less impurities, particularly Co, by radioactivation analysis, and must be used under the temperature of 200-300degC, where hydrogen absorption does not make too progress. It is considered that Ti alloy can be used with less than 0.04wt% H 2 absorption in viewpoint of material mechanical strength. (author)

Novel HPLC Analysis of Hydrocortisone in Conventional and Controlled-Release Pharmaceutical Preparations

OpenAIRE

Adi-Dako, Ofosua; Oppong Bekoe, Samuel; Ofori-Kwakye, Kwabena; Appiah, Enoch; Peprah, Paul

2017-01-01

An isocratic sensitive and precise reverse phase high-performance liquid chromatography (RP-HPLC) method was developed and validated for the determination and quantification of hydrocortisone in controlled-release and conventional (tablets and injections) pharmaceutical preparations. Chromatographic separation was achieved on an ODS (C18), 5??m, 4.6 ? 150?mm, with an isocratic elution using a freshly prepared mobile phase of composition methanol?:?water?:?acetic acid (60?:?30?:?10, v/v/v) at ...

Methodological Study to Develop Standard Operational Protocol on Oral Drug Administration for Children.

Science.gov (United States)

Bijarania, Sunil Kumar; Saini, Sushma Kumari; Verma, Sanjay; Kaur, Sukhwinder

2017-05-01

To develop standard operational protocol (SOP) on oral drug administration and checklist to assess the implementation of the developed SOP. In this prospective methodological study, SOPs were developed in five phases. In the first phase, the preliminary draft of SOPs and checklists were prepared based on literature review, assessment of current practices and focus group discussion (FGD) with bedside working nurses. In the second phase, content validity was checked with the help of Delphi technique (12 experts). Total four drafts were prepared in stages and necessary modifications were made as per suggestions after each Delphi round. Fourth Delphi round was performed after conducting a pilot study. In the fourth phase, all bedside nurses were trained as per SOPs and asked to practice accordingly and observation of thirty oral drug administrations in children was done to check reliability of checklists for implementation of SOPs. In Phase-V, 7 FGDs were conducted with bedside nurses to assess the effectiveness of SOPs. The Content Validity Index (CVI) of SOP and checklists was 99.77%. Overall standardized Cronbach's alpha was calculated as 0.94. All the nurses felt that the SOP is useful. Valid and feasible SOP for drug administration to children through oral route along with valid and reliable checklist were developed. It is recommended to use this document for drug administration to children.

Administración oral de preparado parenteral de vitamina K en anticoagulación excesiva por warfarina

Directory of Open Access Journals (Sweden)

Yoleima Lozada

2012-04-01

Full Text Available La warfarina es frecuentemente usada en la terapia anticoagulante actual, su acción debe ser monitorizada usando el tiempo de protrombina expresado como International Normalized Ratio (INR; cuando se excede el rango de seguridad se puede administrar vitamina K (Vit-K, preferentemente por vía oral. Dicha presentación no está disponible en Venezuela. Se realizó un ensayo clínico, doble ciego, donde a 20 pacientes, edad 18-60 años, sin sangrado e INR inicial de 6 a 10 inclusive; les fue suspendida la warfarina e inmediatamente agrupados al azar a recibir dosis única de Vit-K (oral 1.25mg de Vit-K fraccionada de una presentación parenteral o placebo. El punto final primario, INR < 3.5 a las 24 horas de administrar la dosis, se alcanzó en 70% de los pacientes en Vit-K y 20% en placebo. La reducción absoluta del riesgo y su intervalo de confianza de 95%: RAR (IC95% = 50% (14.4 a 85.6 ρ = 0.028; NNT (IC95% = 2(1.3 a 6.9; no se registraron eventos adversos, ni INR < 2 luego de 24 horas de tratamiento. Los resultados obtenidos son consistentes con estudios donde se administró Vit-K en preparación específica para vía oral. Así la Vit-K en presentación parenteral, administrada por vía oral, es más efectiva y segura que simplemente detener la administración de warfarina para revertir la excesiva anticoagulación, en donde no exista presentación específica oral de Vit-K o ésta sea muy costosa.

Coexistência de pênfigo vulgar e infecção pelo vírus herpes simples na mucosa oral Coexistence of pemphigus vulgaris and herpes simplex virus infection in oral mucosa

Directory of Open Access Journals (Sweden)

Adrianna Milagres

2007-12-01

Full Text Available O pênfigo vulgar é uma doença mucocutânea, imunomediada, caracterizada por lesões vesiculobolhosas, enquanto a infecção pelo vírus herpes simples (HSV é comum na cavidade oral. A coexistência das duas doenças tem sido relatada por alguns autores. Este artigo relata o caso de um paciente com múltiplas lesões em várias áreas da mucosa oral, cujo procedimento foi raspagem e biópsia incisional, que resultou no diagnóstico de pênfigo vulgar associado à infecção pelo HSV. Destaca-se a inusitada associação das doenças e a identificação citopatológica de duas populações celulares com aspectos morfológicos distintos e característicos, capazes de determinar o correto diagnóstico, sendo fundamental para a conduta e terapêutica adequada.Pemphigus vulgaris is an autoimmune mucocutaneous disease, characterized by vesiculobullous lesions. Herpes simplex virus (HSV infection is common in the oral cavity and the coexistence of pemphigus vulgaris and HSV infection has been reported by some authors. In this work, we report a case of a patient with multiple lesions involving several areas of the oral mucous membrane. Based on scraping cytology and incisional biopsy findings, the diagnosis was pemphigus vulgaris associated with HSV infection. We call attention to the uncommon association of both diseases and the cytological identification of two cell populations with different and characteristic morphological aspects, able enough to establish the correct diagnosis and define an appropriate therapeutic approach.

The optical potential for 6Li-6Li elastic scattering at 156 MeV

International Nuclear Information System (INIS)

Micek, S.; Majka, Z.; Klewe-Nebenius, H.; Rebel, H.; Gils, H.J.

1984-10-01

Elastic scattering of 6 Li from 6 Li has been studied for the beam energy of 156 MeV. The experimental differential cross section has been analysed on the basis of the optical model using various phenomenological forms. The spin-orbit interaction proves to be less significant. A semi-microscopic double-folding cluster model which generates the real part of the optical potential by an antisymmetrized d-α cluster wave function of 6 Li and α-α, d-d and d-α interactions is well able to describe the experimental data. (orig.) [de

Development and Evaluation of the Biogenic Emissions Inventory System (BEIS) Model v3.6

Science.gov (United States)

We have developed new canopy emission algorithms and land use data for BEIS v3.6. Simulations with BEIS v3.4 and BEIS v3.6 in CMAQ v5.0.2 are compared these changes to the Model of Emissions of Gases and Aerosols from Nature (MEGAN) and evaluated the simulations against observati...

Phenazopyridine-phthalimide nano-cocrystal: Release rate and oral bioavailability enhancement.

Science.gov (United States)

Huang, Yu; Li, Jin-Mei; Lai, Zhi-Hui; Wu, Jun; Lu, Tong-Bu; Chen, Jia-Mei

2017-11-15

Both cocrystal and nanocrystal technologies have been widely used in the pharmaceutical development for poorly soluble drugs. However, the synergistic effects due to the integration of these two technologies have not been well investigated. The aim of this study is to develop a nano-sized cocrystal of phenazopyridine (PAP) with phthalimide (PI) to enhance the release rate and oral bioavailability of PAP. A PAP-PI nano-cocrystal with particle diameter of 21.4±0.1nm was successfully prepared via a sonochemical approach and characterized by powder X-ray diffraction (PXRD), differential scanning calorimetry (DSC), scanning electron microscopy (SEM) and dynamic light scattering (DLS) analysis. An in vitro release study revealed a significant release rate enhancement for PAP-PI nano-cocrystal as compared to PAP-PI cocrystal and PAP hydrochloride salt. Further, a comparative oral bioavailability study in rats indicated significant improvement in C max and oral bioavailability (AUC 0-∞ ) by 1.39- and 2.44-fold, respectively. This study demonstrated that this novel nano-cocrystal technology can be a new promising option to improve release rate and absorption of poorly soluble compounds in the pharmaceutical industry. Copyright © 2017 Elsevier B.V. All rights reserved.

Lobatamide C: total synthesis, stereochemical assignment, preparation of simplified analogues, and V-ATPase inhibition studies.

Science.gov (United States)

Shen, Ruichao; Lin, Cheng Ting; Bowman, Emma Jean; Bowman, Barry J; Porco, John A

2003-07-02

The total synthesis and stereochemical assignment of the potent antitumor macrolide lobatamide C, as well as synthesis of simplified lobatamide analogues, is reported. Cu(I)-mediated enamide formation methodology has been developed to prepare the highly unsaturated enamide side chain of the natural product and analogues. A key fragment coupling employs base-mediated esterification of a beta-hydroxy acid and a salicylate cyanomethyl ester. Three additional stereoisomers of lobatamide C have been prepared using related synthetic routes. The stereochemistry at C8, C11, and C15 of lobatamide C was assigned by comparison of stereoisomers and X-ray analysis of a crystalline derivative. Synthetic lobatamide C, stereoisomers, and simplified analogues have been evaluated for inhibition of bovine chromaffin granule membrane V-ATPase. The salicylate phenol, enamide NH, and ortho-substitution of the salicylate ester have been shown to be important for V-ATPase inhibitory activity.

Portuguese self-reported oral-hygiene habits and oral status.

Science.gov (United States)

Melo, Paulo; Marques, Sandra; Silva, Orlando Monteiro

2017-06-01

Good oral health is essential for good general health and quality of life. In Portugal, there are few studies on oral-health habits and the population's perceptions of this behaviour. The main purpose of this study was to characterise the Portuguese population's self-reported oral-health status, habits and perceptions, as well as their demands regarding national oral health-care services. A randomised group of 1,395 individuals, > 15 years of age, was selected as a representative sample of the Portuguese population. Face-to-face interviews were conducted, based on a structured questionnaire with closed and semi-closed questions. The data were submitted for statistical analysis using SPSS. A sample of 1,102 individuals answered the questionnaire. The great majority of the sample (97.6%) brushed their teeth daily, 70.3% had lost permanent teeth and 6.4% were edentulous. The loss of permanent teeth was statistically associated with poor oral-hygiene habits (P hygiene habits among older people and people from lower social classes. © 2016 FDI World Dental Federation.

Surface properties of Ti-6Al-4V alloy part I: Surface roughness and apparent surface free energy

Energy Technology Data Exchange (ETDEWEB)

Yan, Yingdi; Chibowski, Emil; Szcześ, Aleksandra, E-mail: aszczes@poczta.umcs.lublin.pl

2017-01-01

Titanium (Ti) and its alloys are the most often used implants material in dental treatment and orthopedics. Topography and wettability of its surface play important role in film formation, protein adhesion, following osseointegration and even duration of inserted implant. In this paper, we prepared Ti-6Al-4V alloy samples using different smoothing and polishing materials as well the air plasma treatment, on which contact angles of water, formamide and diiodomethane were measured. Then the apparent surface free energy was calculated using four different approaches (CAH, LWAB, O-W and Neumann's Equation of State). From LWAB approach the components of surface free energy were obtained, which shed more light on the wetting properties of samples surface. The surface roughness of the prepared samples was investigated with the help of optical profilometer and AFM. It was interesting whether the surface roughness affects the apparent surface free energy. It was found that both polar interactions the electron donor parameter of the energy and the work of water adhesion increased with decreasing roughness of the surfaces. Moreover, short time plasma treatment (1 min) caused decrease in the surface hydrophilic character, while longer time (10 min) treatment caused significant increase in the polar interactions and the work of water adhesion. Although Ti-6Al-4V alloy has been investigated many times, to our knowledge, so far no paper has been published in which surface roughness and changes in the surface free energy of the alloy were compared in the quantitative way in such large extent. This novel approach deliver better knowledge about the surface properties of differently smoothed and polished samples which may be helpful to facilitate cell adhesion, proliferation and mineralization. Therefore the results obtained present also potentially practical meaning. - Highlights: • Surface of five Ti-6Al-4V alloy samples were smoothed and polished successively. • The

Layered Composite of TiC-TiB2 to Ti-6Al-4V in Graded Composition by Combustion Synthesis in High-gravity Field

International Nuclear Information System (INIS)

Huang Xuegang; Zhao Zhongmin; Zhang Long

2013-01-01

By taking combustion synthesis to prepare solidified TiB 2 matrix ceramic in high-gravity field, the layered composite of TiC-TiB 2 ceramic to Ti-6Al-4V substrate in graded composition was achieved. XRD, FESEM and EDS results showed that the bulk full-density solidified TiC-TiB 2 composite was composed of fine TiB 2 platelets, TiC irregular grains, a few of α-Al 2 O 3 inclusions and Cr alloy phases, and α'-Ti phases alternating with Ti-enriched carbides constituted the matrix of the joint in which fine TiB platelets were embedded, whereas some C, B atoms were also detected at the heat-affected zone of Ti-6A1-4V substrate. The layered composite of the solidified ceramic to Ti-6Al-4V substrate in graded composition with continuous microstructure was considered a result of fused joint and inter-diffusion between liquid ceramic and surface-molten Ti alloy, followed by TiB 2 -Ti peritectic reaction and subsequent eutectic reaction in TiC-TiB-Ti ternary system.

Assessing Oral Cancer Awareness Among Dentists.

Science.gov (United States)

Kebabcıoğlu, Özge; Pekiner, Filiz Namdar

2017-03-01

The aim of this study was to assess oral cancer awareness among dentists who attended 101st FDI World Dental Congress, İstanbul, Turkey. Among 170 dentists who agreed to participate, there were 13 oral surgeons, 6 restorative dentists, 4 endodontists, 4 orthodontists, 6 periodontists, 5 pedodontists, and 14 prosthodontists. Knowledge of oral cancer risk factors and diagnosis procedures, dentists' attitude towards oral cancers, management practice regarding oral cancer, and oral cancer information sources were assessed using 25 questions. The data were analyzed with IBM SPSS Statistics 22.0 program. Among 170 participant dentists, there were 69 (40.6%) male dentists and 101 (59.4%) female dentists. Largest number of them identified tobacco (98.8%) and alcohol usage (91.2%), prior oral cancer lesions (95.3%), viral infections (90.0%), UV exposure (86.5%), and betel quid chewing (80.6%), and lower numbers reported older age (56.5%) and low consumption of fruit and vegetables (52.4%). Oral medicine specialists scored marginally higher in indicating erythroplakia and leukoplakia most likely to be precancerous and squamous cell carcinoma as the most common form of oral cancer (p ral cancer detection and prevention.

Hydroxychloroquine niosomes: a new trend in topical management of oral lichen planus.

Science.gov (United States)

Bendas, Ehab R; Abdullah, Hamoud; El-Komy, Mohamed H M; Kassem, Mohamed A A

2013-12-31

The work aimed at studying a novel topical niosomal gel formulation of hydroxychloroquine for the management of oral lichen planus. Niosomes have been reported as conceivable vesicles to deliver drug molecules to the desired mucous membrane or skin layers. Hydroxychloroquine niosomes were designed using different methods of preparation. Tween 20 and cholesterol in molar ratio (1:0.5) were used. The prepared systems were characterized for entrapment efficiency, particle size and in vitro drug release. Different factors affecting the encapsulation of hydroxychloroquine in niosomes were studied vs. varying the type of surfactant, the cholesterol:surfactant molar ratio and the amount of the drug. The selected noisome formulation was dispersed in different gel formulations and evaluated according to the in vitro drug release and the physical stability. The results showed that the type of surfactant, cholesterol ratio and incorporated amount of drug altered the entrapment efficiency and the in vitro release of hydroxychloroquine from niosomes. The optimum formulation was prepared by reverse phase evaporation technique using Brij 98:cholesterol molar ratio (1:1.5) and containing 20mg of hydroxychloroquine and incorporated in 20% w/v Pluronic F-127 gel. A double-blind, controlled clinical study was performed using two groups of patients. Group A (n=11) who received hydroxychloroquine niosomal gel formulation, one application-a-day over 4 months showed 64.28% reduction in the size of lesions and the average score of pain was reduced from "4" to "1". Compared to placebo group B (n=5), who showed only 3.94% reduction in the lesion size and the average score of pain was remained "3". Our results suggest that these niosomal formulations could constitute a promising approach for the topical treatment of oral lichen planus in short time with less side effects and no recurrence after stopping the treatment. Copyright © 2013 Elsevier B.V. All rights reserved.

Preoperative chemoradiotherapy with oral doxifluridine plus low-dose oral leucovorin in unresectable primary rectal cancer

International Nuclear Information System (INIS)

Seong, Jinsil; Cho, Jae Ho; Kim, Nam Kyu; Min, Jin Sik; Suh, Chang Ok

2001-01-01

Purpose: The use of oral chemotherapeutic agents in chemoradiotherapy provides several advantages. Doxifluridine, an oral 5-FU prodrug, has been shown to be effective in colorectal cancer. We attempted a Phase II trial of preoperative chemoradiotherapy with doxifluridine plus a low-dose oral leucovorin in unresectable primary rectal cancer patients. In this study, toxicity and efficacy were evaluated. Methods and Materials: There were 23 patients with primary unresectable rectal cancer in this trial, 21 of whom were available for analysis. The patients were treated with oral doxifluridine (900 mg/day) plus oral leucovorin (30 mg/day) from days 1 to 35, and pelvic radiation of 45 Gy over 5 weeks. Surgical resection was performed 5-6 weeks after the treatment. Results: Acute toxicity involved thrombocytopenia, nausea/vomiting, diarrhea, and skin reaction. All were in Grade 1/2, except diarrhea, which was not only the most frequent (7 patients, 33.3%), but also the only toxicity of Grade 3 (2 patients). The clinical tumor response was shown in 5 patients (23.8%) as a complete response and 13 patients (61.9%) as a partial response. A complete resection with negative resection margin was done in 18 patients (85.7%), in 2 of whom a pathologic complete response was shown (9.5%). The overall downstaging rate in the T- and N-stage groupings was 71.4% (15 patients). Conclusion: This study demonstrated the efficacy and low toxicity of chemoradiotherapy with doxifluridine. Currently, a Phase III randomized trial of chemoradiotherapy is ongoing at our institute to compare the therapeutic efficacy of oral 5-FU with respect to i.v. 5-FU in locally advanced and unresectable rectal cancer

Semi-solid dosage form of clonazepam for rapid oral mucosal absorption.

Science.gov (United States)

Sakata, Osamu; Machida, Yoshiharu; Onishi, Hiraku

2011-07-01

In order to obtain an alternative to the intravenous (i.v.) dosage form of clonazepam (CZ), an oral droplet formulation of CZ was developed previously; however, the droplet was physically unstable. Therefore, in the present study, it was attempted to develop an easily-handled dosage form, which was more physically stable and allowed rapid drug absorption from oral mucosa. A semi-solid dosage form, composed of polyethylene glycol 1500 (PEG), CZ, and oleic acid (OA) at 37/1/2 (w/w) and named PEG/CZ/OA, and a semi-solid dosage form containing PEG and CZ at 39/1 (w/w), called PEG/CZ, were prepared. Their physical stability in air at room temperature and oral mucosal absorption in rats were investigated. The semi-solid dosage forms were much more stable physically than the droplet, that is, no recrystallization of CZ was observed for at least 8 days. The effective concentration for humans and rats (20 ng/mL or more) was achieved within 30 min after buccal administration for both PEG/CZ/OA and PEG/CZ. The plasma concentration increased gradually and less varied at each time point for PEG/CZ/OA. PEG/CZ/OA was found to show more rapid and higher absorption of CZ in buccal administration than in sublingual administration. Buccal administration with the semi-solid dosage PEG/CZ with or without OA was suggested to be a possibly useful novel dosage form as an alternative to i.v. injection.

Effect of plasma molybdenized buffer layer on adhesive properties of TiN film coated on Ti6Al4V alloy

Energy Technology Data Exchange (ETDEWEB)

Qin, Lin, E-mail: qinlin@tyut.edu.cn; Yi, Hong; Kong, Fanyou; Ma, Hua; Guo, Lili; Tian, Linhai; Tang, Bin

2017-05-01

Highlights: • A molybdenized layer was prepared as a buffer layer under TiN film on Ti6Al4V. • The molybdenized layer can enhance adhesion strength of PVD coatings effectively. • The duplex treated samples increase elastic energy ratio in the impact tests. • The enhancement attributes to the hardness improvement and inverted-S shape elastic modulus profile of the modified layer. - Abstract: Effect of molybdenized buffer layer on adhesion strength of TiN film on Ti6Al4V alloy was investigated. The buffer layer composed of a dense molybdenum deposition layer, a rapid drop zone and a slow fall zone was prepared using double glow plasma surface alloying technique. Scratch tests and low energy repeated impact tests were adopted to comparatively evaluate the duplex treated layers and the single TiN samples. The results show that the critical load was increased from 62 N for the single TiN film to over 100 N for the duplex treated layer. The volume of impact pit, formed in impact tests, of the single TiN samples is 9.15 × 10{sup 6} μm{sup 3}, and about 1.5 times than that of the duplex treated samples. The Leeb hardness values reveal that about 70% impact energy was transferred to the single TiN samples to generate permanent deformation, while that was only about 47% for the duplex treated samples. The mechanism of improving adhesion strength is attributed to synergistic effect due to an inverted-S shape elastic modulus distribution produced by the molybdenized layer.

Molybdeno-Aluminizing of Powder Metallurgy and Wrought Ti and Ti-6Al-4V alloys by Pack Cementation process

International Nuclear Information System (INIS)

Tsipas, Sophia A.; Gordo, Elena

2016-01-01

Wear and high temperature oxidation resistance of some titanium-based alloys needs to be enhanced, and this can be effectively accomplished by surface treatment. Molybdenizing is a surface treatment where molybdenum is introduced into the surface of titanium alloys causing the formation of wear-resistant surface layers containing molybdenum, while aluminizing of titanium-based alloys has been reported to improve their high temperature oxidation properties. Whereas pack cementation and other surface modification methods have been used for molybdenizing or aluminizing of wrought and/or cast pure titanium and titanium alloys, such surface treatments have not been reported on titanium alloys produced by powder metallurgy (PM). Also a critical understanding of the process parameters for simultaneous one step molybdeno-aluminizing of titanium alloys by pack cementation and the predominant mechanism for this process have not been reported. The current research work describes the surface modification of titanium and Ti-6Al-4V prepared by PM by molybdeno-aluminizing and analyzes thermodynamic aspects of the deposition process. Similar coatings are also deposited to wrought Ti-6Al-4V and compared. Characterization of the coatings was carried out using scanning electron microscopy and x-ray diffraction. For both titanium and Ti-6Al-4V, the use of a powder pack containing ammonium chloride as activator leads to the deposition of molybdenum and aluminium into the surface but also introduces nitrogen causing the formation of a thin titanium nitride layer. In addition, various titanium aluminides and mixed titanium aluminium nitrides are formed. The appropriate conditions for molybdeno-aluminizing as well as the phases expected to be formed were successfully determined by thermodynamic equilibrium calculations. - Highlights: •Simultaneous co-deposition of Mo-Al onto powder metallurgy and wrought Ti alloy •Thermodynamic calculations were used to optimize deposition conditions

Molybdeno-Aluminizing of Powder Metallurgy and Wrought Ti and Ti-6Al-4V alloys by Pack Cementation process

Energy Technology Data Exchange (ETDEWEB)

Tsipas, Sophia A., E-mail: stsipas@ing.uc3m.es; Gordo, Elena

2016-08-15

Wear and high temperature oxidation resistance of some titanium-based alloys needs to be enhanced, and this can be effectively accomplished by surface treatment. Molybdenizing is a surface treatment where molybdenum is introduced into the surface of titanium alloys causing the formation of wear-resistant surface layers containing molybdenum, while aluminizing of titanium-based alloys has been reported to improve their high temperature oxidation properties. Whereas pack cementation and other surface modification methods have been used for molybdenizing or aluminizing of wrought and/or cast pure titanium and titanium alloys, such surface treatments have not been reported on titanium alloys produced by powder metallurgy (PM). Also a critical understanding of the process parameters for simultaneous one step molybdeno-aluminizing of titanium alloys by pack cementation and the predominant mechanism for this process have not been reported. The current research work describes the surface modification of titanium and Ti-6Al-4V prepared by PM by molybdeno-aluminizing and analyzes thermodynamic aspects of the deposition process. Similar coatings are also deposited to wrought Ti-6Al-4V and compared. Characterization of the coatings was carried out using scanning electron microscopy and x-ray diffraction. For both titanium and Ti-6Al-4V, the use of a powder pack containing ammonium chloride as activator leads to the deposition of molybdenum and aluminium into the surface but also introduces nitrogen causing the formation of a thin titanium nitride layer. In addition, various titanium aluminides and mixed titanium aluminium nitrides are formed. The appropriate conditions for molybdeno-aluminizing as well as the phases expected to be formed were successfully determined by thermodynamic equilibrium calculations. - Highlights: •Simultaneous co-deposition of Mo-Al onto powder metallurgy and wrought Ti alloy •Thermodynamic calculations were used to optimize deposition conditions

Large coercivity in nanocrystalline TbMn6Sn6 permanent magnets prepared by mechanical milling

International Nuclear Information System (INIS)

Zhang Hongwei; Zhao Tongyun; Zhang Jian; Rong Chuanbing; Zhang Shaoying; Shen Baogen; Li Lu; Zhang Ligang

2003-01-01

Isotropic TbMn 6 Sn 6 was prepared by mechanical milling and subsequent annealing. Although the crystalline grain size was a little larger than 15 nm, no remanence enhancement resulting from intergrain exchange coupling was observed. The coercivity μ 0 H c = 0.96 T at 293 K was much larger than that expected from magnetocrystalline anisotropy. The smallest effective anisotropy constant is suggested to be 0.25 MJ m -3 when the coercivity mechanism is controlled by coherent rotation of magnetization in a single-domain grain. The contributions of shape anisotropy and magnetoelastic anisotropy are considered in order to explain the large coercivity in the magnets

Functionally engineered nanosized particles in pharmaceutics: improved oral delivery of poorly water-soluble drugs.

Science.gov (United States)

Ozeki, Tetsuya; Tagami, Tatsuaki

2013-01-01

The development of drug nanoparticles has attracted substantial attention because of their potential to improve the dissolution rate and oral availability of poorly water-soluble drugs. This review summarizes the recent articles that discussed nanoparticle-based oral drug delivery systems. The preparation methods were categorized as top-down and bottom-up methods, which are common methods for preparing drug nanoparticles. In addition, methods of handling drug nanoparticles (e.g., one-step preparation of nanocomposites which are microparticles containing drug nanoparticles) were introduced for the effective preservation of drug nanoparticles. The carrier-based preparation of drug nanoparticles was also introduced as a potentially promising oral drug delivery system.

Direct analysis of [6,6-(2)H2]glucose and [U-(13)C6]glucose dry blood spot enrichments by LC-MS/MS.

Science.gov (United States)

Coelho, Margarida; Mendes, Vera M; Lima, Inês S; Martins, Fátima O; Fernandes, Ana B; Macedo, M Paula; Jones, John G; Manadas, Bruno

2016-06-01

A liquid chromatography tandem mass spectrometry (LC-MS/MS) using multiple reaction monitoring (MRM) in a triple-quadrupole scan mode was developed and comprehensively validated for the determination of [6,6-(2)H2]glucose and [U-(13)C6]glucose enrichments from dried blood spots (DBS) without prior derivatization. The method is demonstrated with dried blood spots obtained from rats administered with a primed-constant infusion of [U-(13)C6]glucose and an oral glucose load enriched with [6,6-(2)H2]glucose. The sensitivity is sufficient for analysis of the equivalent to blood and the overall method was accurate and precise for the determination of DBS isotopic enrichments. Copyright © 2016 Elsevier B.V. All rights reserved.

Preparation and evaluation of oral multiparticulate formulations of acid-labile drugs

OpenAIRE

Huang, Fang

2017-01-01

Säure-labile Medikamente werden leicht in saurem Medium abgebaut, welche hauptsächlich als enterisch beschichtete Dosierungsformen für die orale Verabreichung formuliert wurden. Das Ziel dieser Studie war es, orale multipartikuläre Formulierungen von säure-labilen Medikamenten, mit Ilaprazol, Lansoprazol und Rabeprazol Natrium als Modellarzneistoffe vorzubereiten. Der Einfluss der Wirkstofflöslichkeit von Lansoprazol und Rabeprazol Natrium und des Kerntyps, wurde auf das Übe...

The short-circuit test results of 6.9 kV/2.3 kV 400 kVA-class YBCO model transformer

International Nuclear Information System (INIS)

Tomioka, A.; Otonari, T.; Ogata, T.; Iwakuma, M.; Okamoto, H.; Hayashi, H.; Iijima, Y.; Saito, T.; Gosho, Y.; Tanabe, K.; Izumi, T.; Shiohara, Y.

2011-01-01

The 6.9 kV/2.3 kV 400 kVA-class single-phase YBCO model transformer with the YBCO tape with copper tape was manufactured for short-circuit current test. Short-circuit test was performed and the short-circuit current of primary winding was 346 A which was about six times larger than the rated current. The I-V characteristics of the winding did not change before and after the test. The transformer withstood short-circuit current. We are planning to turn the result into a consideration of a 66 kV/6.9 kV-20 MVA-class three-phase superconducting transformer. We are developing an elemental technology for 66 kV/6.9 kV 20 MVA-class power transformer with YBCO conductors. The protection of short-circuit technology is one of the elemental technologies for HTS transformer. Since short-circuit current is much higher than critical current of YBCO tape, there is a possibility that superconducting characteristics may be damaged during short-circuit period. We made a conductor to compose the YBCO tape with copper tape. We manufactured 6.9 kV/2.3 kV 400 kVA-class YBCO model transformer using this conductor and performed short-circuit current test. The short-circuit current of primary winding was 346 A which was about six times larger than the rated current. The I-V characteristics of the winding did not change before and after the test. We may consider this conductor withstands short-circuit current.

Effect of Zirconium Addition on Microstructure and Mechanical Property of TiC/Ti6A14V Composites

Science.gov (United States)

Ma, Xuliang; Wang, Xiang; Li, Li; Gai, Pengtao; Zhu, Chengwu

TiC/Ti6A14V composites with different Zr additions were prepared successfully in a consumable vacuum arc furnace equipped with a water-cooled copper crucible and the effect of the Zr content on the microstructure and mechanical property of 15 vol.%TiC/Ti6A14V composites was investigated by XRD, SEM and hardness testing. The results show that when the level of Zr addition is less than 4 wt.%, the morphology of the primary TiC in the composites is dendrite, and the petal-shape, piece-shape or palpus-shape eutectic TiC separates out around the primary TiC. The average size of the primary TiC decreases and the amount of eutectic TiC increases gradually with increasing Zr content. The effects of Zr on morphology of the primary TiC weaken with further addition of Zr. And the hardness (HRC) of composites was obviously increased in the whole range of Zr addition. The refinement mechanism of Zr was attributed to the combined effects of increase in nucleation rate at the constitutionally supercooled zone ahead of the solidification front and reduction in growth rate.

Silexan, an orally administered Lavandula oil preparation, is effective in the treatment of 'subsyndromal' anxiety disorder: a randomized, double-blind, placebo controlled trial.

Science.gov (United States)

Kasper, Siegfried; Gastpar, Markus; Müller, Walter E; Volz, Hans-Peter; Möller, Hans-Jürgen; Dienel, Angelika; Schläfke, Sandra

2010-09-01

This study was performed to investigate the anxiolytic efficacy of silexan, a new oral lavender oil capsule preparation, in comparison to placebo in primary care. In 27 general and psychiatric practices 221 adults suffering from anxiety disorder not otherwise specified (Diagnostic and Statistical Manual of Mental disorders-IV 300.00 or International Statistical Classification of Diseases and Related Health Problems, Tenth revision F41.9) were randomized to 80 mg/day of a defined, orally administered preparation from Lavandula species or placebo for 10 weeks with visits every 2 weeks. A Hamilton Anxiety Scale (HAMA) total score >or=18 and a total score >5 for the Pittsburgh Sleep Quality Index (PSQI) were required. The primary outcome measures were HAMA and PSQI total score decrease between baseline and week 10. Secondary efficacy measures included the Clinical Global Impressions scale, the Zung Self-rating Anxiety Scale, and the SF-36 Health Survey Questionnaire. Patients treated with silexan showed a total score decrease by 16.0+/-8.3 points (mean+/-SD, 59.3%) for the HAMA and by 5.5+/-4.4 points (44.7%) for the PSQI compared to 9.5+/-9.1 (35.4%) and 3.8+/-4.1 points (30.9%) in the placebo group (PLavandula oil preparation had a significant beneficial influence on quality and duration of sleep and improved general mental and physical health without causing any unwanted sedative or other drug specific effects. Lavandula oil preparation silexan is both efficacious and safe for the relief of anxiety disorder not otherwise specified. It has a clinically meaningful anxiolytic effect and alleviates anxiety related disturbed sleep.

Test of 6-inch-thick pressure vessels. Series 2. Intermediate test vessels V-3, V-4, and V-6

International Nuclear Information System (INIS)

Bryan, R.H.; Merkle, J.G.; Raftenberg, M.N.; Robinson, G.C.; Smith, J.E.

1975-11-01

The second series of intermediate vessel tests were crack initiation fracture tests of 6-in.-thick 39-in.-OD steel vessels with sharp surface flaws approximately 2 1 / 2 in. deep by 8 in. long in the longitudinal weld seams of the test cylinders. Fracture was initiated by means of hydraulic pressurization. One vessel was tested at each of three temperatures: 75, 130, and 190 0 F. Pretest analyses were made to predict the failure pressures and strains. Fracture toughness data obtained by equivalent-energy analysis of precracked Charpy-V tests and compact-tension specimen tests were used in the fracture analyses. The vessels behaved generally as had been expected. Posttest fracture analyses were also performed for each vessel. Detailed discussions of the fracture analysis methods developed in support of the vessel tests described are included. 34 references

Antimicrobial Activity of Nitric Oxide-Releasing Ti-6Al-4V Metal Oxide

Science.gov (United States)

Reger, Nina A.; Meng, Wilson S.; Gawalt, Ellen S.

2017-01-01

Titanium and titanium alloy materials are commonly used in joint replacements, due to the high strength of the materials. Pathogenic microorganisms can easily adhere to the surface of the metal implant, leading to an increased potential for implant failure. The surface of a titanium-aluminum-vanadium (Ti-6Al-4V) metal oxide implant material was functionalized to deliver an small antibacterial molecule, nitric oxide. S-nitroso-penicillamine, a S-nitrosothiol nitric oxide donor, was covalently immobilized on the metal oxide surface using self-assembled monolayers. Infrared spectroscopy was used to confirm the attachment of the S-nitrosothiol donor to the Ti-Al-4V surface. Attachment of S-nitroso-penicillamine resulted in a nitric oxide (NO) release of 89.6 ± 4.8 nmol/cm2 under physiological conditions. This low concentration of nitric oxide reduced Escherichia coli and Staphylococcus epidermidis growth by 41.5 ± 1.2% and 25.3 ± 0.6%, respectively. Combining the S-nitrosothiol releasing Ti-6Al-4V with tetracycline, a commonly-prescribed antibiotic, increased the effectiveness of the antibiotic by 35.4 ± 1.3%, which allows for lower doses of antibiotics to be used. A synergistic effect of ampicillin with S-nitroso-penicillamine-modified Ti-6Al-4V against S. epidermidis was not observed. The functionalized Ti-6Al-4V surface was not cytotoxic to mouse fibroblasts. PMID:28635681

Human Cadaver Material in Preclinical Oral Surgery.

Science.gov (United States)

Barber, H. Dexter; And Others

1993-01-01

A University of Michigan dental school curriculum for oral surgery that uses human cadaver heads is described. Selection, preparation, and laboratory use of the materials are outlined. Faculty and students have received the sequence well and found it prepared them for clinical rotation. (MSE)

Preparative separation and purification of bufadienolides from ChanSu by high-speed counter-current chromatography combined with preparative HPLC

International Nuclear Information System (INIS)

Li, Jialian; Zhang, Yongqing; Lin, Yunliang; Wang, Xiao; Fang, Lei; Geng, Yanling; Zhang, Qinde

2013-01-01

Eight bufadienolides were successfully isolated and purified from ChanSu by high-speed counter-current chromatography (HSCCC) combined with preparative HPLC (prep-HPLC). First, a stepwise elution mode of HSCCC with the solvent system composed of petroleum ether–ethyl acetate–methanol–water (4:6:4:6, 4:6:5:5, v/v) was employed and four bufadienolides, two partially purified fractions were obtained from 200 mg of crude extract. The partially purified fractions III and VI were then further separated by prepHPLC, respectively, and another four bufadienolides were recovered. Their structures were confirmed by ESI-MS and 1 H-NMR spectra. (author)

Preparation and Characterization of Epitaxial VO2 Films on Sapphire Using Postepitaxial Topotaxy Route via Epitaxial V2O3 Films

Science.gov (United States)

Yamaguchi, Iwao; Manabe, Takaaki; Tsuchiya, Tetsuo; Nakajima, Tomohiko; Sohma, Mitsugu; Kumagai, Toshiya

2008-02-01

Epitaxial VO2 films were prepared on the C-planes of α-Al2O3 substrates by a metal organic deposition (MOD) process. It was difficult to obtain the single phase of (010)M-oriented VO2 films, in which the subscript M refers to the monoclinic indices, by the heat treatment of amorphous precursor films in the VO2-stable region after the pyrolysis of the coating solution. The product films consisted of discontinuous circular grains of 1-2 µm size on the substrate surface. Therefore, we prepared the (010)M-oriented epitaxial VO2 films using postepitaxial topotaxy (PET), that is, topotactic oxidation of (0001)-oriented epitaxial V2O3 films. First, epitaxial V2O3(0001) films were obtained by MOD starting with a vanadium naphthenate solution. Second, the epitaxial V2O3(0001) films were topotactically oxidized at 500 °C in an Ar-O2 gas mixture with pO2 = 10-4 atm to obtain (010)M-oriented epitaxial VO2 films. The epitaxial relationships were VO2(010)M ∥ α-Al2O3(0001) and VO2[100]M ∥ α-Al2O3[0110], [1010], [1100]. The VO2(010)M films exhibited metal-semiconductor transitions with hysteresis loops at 60-80 °C. The resistivity change before and after the transition of the VO2(010)M film oxidized for 6 h was three orders of magnitude.

Shared Oral Care

DEFF Research Database (Denmark)

Hede, Børge; Elmelund Poulsen,, Johan; Christophersen, Rasmus

2014-01-01

Shared Oral Care - Forebyggelse af orale sygdomme på plejecentre Introduktion og formål: Mangelfuld mundhygiejne hos plejekrævende ældre er et alment og veldokumenteret sundhedsproblem, der kan føre til massiv udvikling af tandsygdomme, og som yderligere kan være medvirkende årsag til alvorlige...... ressourceanvendelse er muligt at skabe en betydeligt forbedret mundhygiejne hos plejekrævende ældre Key words: Geriatric dentistry, nursing home, community health services, prevention, situated learning...

Preparation and Evaluation of Novel In Situ Gels Containing Acyclovir for the Treatment of Oral Herpes Simplex Virus Infections

Directory of Open Access Journals (Sweden)

Binu Chaudhary

2014-01-01

Full Text Available The objective of this work was to develop an oral mucosal drug delivery system to facilitate the local and systemic delivery of acyclovir for the treatment of oral herpes infection caused by the herpes simplex virus (HSV. An in situ gelling system was used to increase the residence time and thus the bioavailability of acyclovir in oral mucosa. Temperature and pH trigged in situ gel formulations were prepared by cold method using polymers like poloxamer 407, carbopol 934, and HPMC. Glycerin and a mixture of tween 80 and ethanol (1 : 2 ratio were used as the drug dissolving solvent. The pH of carbopol containing formulation was adjusted to pH 5.8 while the pH of poloxamer solution was adjusted to pH 7. These formulations were evaluated for sol-gel transition temperature, gelling capacity, pH, viscosity, spreadability, gel strength, drug content, ex-vitro permeation, and mucoadhesion. The gelation temperatures of all the formulations were within the range of 28–38°C. All the formulations exhibited fairly uniform drug content (98.15–99.75%. Drug release study of all the formulations showed sustained release properties. The release of drug through these in situ gel formulations followed the Higuchi model and Korsmeyer peppas model mechanism.

Peculiarities of component interaction in {Gd, Er}-V-Sn Ternary systems at 870 K and crystal structure of RV6Sn6 stannides

International Nuclear Information System (INIS)

Romaka, L.; Stadnyk, Yu.; Romaka, V.V.; Demchenko, P.; Stadnyshyn, M.; Konyk, M.

2011-01-01

Highlights: → {Gd, Er}-V-Sn ternary systems at 870 K are characterized by formation of stannides with general compositions RV 6 Sn 6 . → Isostructural RV 6 Sn 6 compounds were also found with Y, Dy, Ho, Tm, and Lu. → The crystal structure of RV 6 Sn 6 compounds was determined by powder diffraction method. → Structural analysis showed that RV 6 Sn 6 compounds (R = Gd, Dy-Tm, Lu) are disordered; YV 6 Sn 6 is characterized by structure ordering. - Abstract: The phase equilibria in the Gd-V-Sn and Er-V-Sn ternary systems were studied at 870 K by means of X-ray and metallographic analyses in the whole concentration range. Both Gd-V-Sn and Er-V-Sn systems are characterized by formation of one ternary compound at investigated temperature, with stoichiometry RV 6 Sn 6 (SmMn 6 Sn 6 -type, space group P6/mmm, a = 0.55322(3) nm, c = 0.91949(7) nm for Gd, a = 0.55191(2) nm, c = 0.91869(8) nm for Er). Solubility of the third component in the binary compounds was not observed. Compounds with the SmMn 6 Sn 6 -type were also found with Dy, Ho, Tm, and Lu, while YV 6 Sn 6 compound crystallizes in HfFe 6 Ge 6 structure type. All investigated compounds are the first ternary stannides with rare earth elements and vanadium.

Hydridation of Ti-6Al-4V

International Nuclear Information System (INIS)

Domizzi, G; Luppo, M.I; Ortiz, M; Vigna, G

2004-01-01

The production of Ti pieces or their alloys through powder metallurgy is an economical alternative that replaces the costly methods commonly used. The Ti-6AI-4V alloy is widely used in the aerospace, chemical and medical industries. The use of powder from the alloy instead of using more pure alloyed titanium powders, further simplifies the production process. The presence of V allows the phase β to stabilize at very low temperatures and both alloys alter the Ti-H equilibrium diagram. This work analyzes to what degree these effects influence the obtaining of powders from this alloy from that of hydridation and dehydridation. Although it has slower kinetics, powders can be produced in times similar to those found for grade 2 Ti since the distribution of hydrides in the sample is uniform and the material is fragile enough for concentrations of approximately 0.7 H/Ti (CW)

Pharmacokinetics of fexofenadine: evaluation of a microdose and assessment of absolute oral bioavailability.

Science.gov (United States)

Lappin, Graham; Shishikura, Yoko; Jochemsen, Roeline; Weaver, Richard John; Gesson, Charlotte; Houston, Brian; Oosterhuis, Berend; Bjerrum, Ole J; Rowland, Malcolm; Garner, Colin

2010-05-12

A human pharmacokinetic study was performed to assess the ability of a microdose to predict the pharmacokinetics of a therapeutic dose of fexofenadine and to determine its absolute oral bioavailability. Fexofenadine was chosen to represent an unmetabolized transporter substrate (P-gP and OATP). Fexofenadine was administered to 6 healthy male volunteers in a three way cross-over design. A microdose (100microg) of (14)C-drug was administered orally (period 1) and intravenously by 30min infusion (period 2). In period 3 an intravenous tracer dose (100microg) of (14)C-drug was administered simultaneously with an oral unlabelled therapeutic dose (120mg). Plasma was collected from all 3 periods and analysed for both total (14)C content and parent drug by accelerator mass spectrometry (AMS). For period 3, plasma samples were also analysed using HPLC-fluorescence to determine total drug concentration. Urine was collected and analysed for total (14)C. Good concordance between the microdose and therapeutic dose pharmacokinetics was observed. Microdose: CL 13L/h, CL(R) 4.1L/h, V(ss) 54L, t(1/2) 16h; therapeutic dose: CL 16L/h, CL(R) 6.2L/h, V(ss) 64L, t(1/2) 12h. The absolute oral bioavailability of fexofenadine was 0.35 (microdose 0.41, therapeutic dose 0.30). Despite a 1200-fold difference in dose of fexofenadine, the microdose predicted well the pharmacokinetic parameters following a therapeutic dose for this transporter dependent compound.

Floating Microparticulate Oral Diltiazem Hydrochloride Delivery ...

African Journals Online (AJOL)

Delivery System for Improved Delivery to Heart ... Conclusion: Microparticulate floating (gastroretentive) oral drug delivery system of diltiazem prepared ..... treatment of cardiac disease. ... hydrochloride-loaded mucoadhesive microspheres.

Compounds of type Ba/sub 2/Bsup(III)Ossup(V)O/sub 6/

Energy Technology Data Exchange (ETDEWEB)

Treiber, U; Kemmler-Sack, S [Tuebingen Univ. (Germany, F.R.). Lehrstuhl fuer Anorganische Chemie 2

1981-07-01

The black perovskites of type Ba/sub 2/Bsup(III)Ossup(V)O/sub 6/ crystallize cubic (Bsup(III) = Pr, Nd, Sm-Lu, Y) and rhombohedral (Bsup(III) = La) respectively; the cell volumina decrease linearily with (rsub(B)sup(III))/sup 3/. Intensity calculations on powder data for Ba/sub 2/YOsO/sub 6/ (space group Fm3m-Osub(h)/sup 5/) and Ba/sub 2/LaOsO/sub 6/ (space group R-3m-Dsub(3d)/sup 5/) gave the intensity related R'values of 4.6% and 5.0% respectively. The results of the vibrational spectroscopic investigations are reported in common with the bond orders, M-O distances and mean amplitudes and compared with the corresponding values of the series Ba/sub 2/Bsup(III)Irsup(V)O/sub 6/ and Ba/sub 2/Bsup(III)Rusup(V)O/sub 6/.

Development of coated nifedipine dry elixir as a long acting oral delivery with bioavailability enhancement.

Science.gov (United States)

Choi, Jae-Yoon; Jin, Su-Eon; Park, Youmie; Lee, Hyo-Jong; Park, Yohan; Maeng, Han-Joo; Kim, Chong-Kook

2011-10-01

To develop the long acting nifedipine oral delivery with bioavailability enhancement, a nifedipine dry elixir (NDE) containing nifedipine ethanol solution in dextrin shell was prepared using a spray-dryer, and then coated nifedipine dry elixir (CNDE) was prepared by coating NDE with Eudragit acrylic resin. The physical characteristics and bioavailability of NDE and CNDE were evaluated, and then compared to those of nifedipine powder. NDE and CNDE, which were spherical in shape, had about 6.64 and 8.68-8.75 μm of geometric mean diameters, respectively. The amount of nifedipine dissolved from NDE for 60 min increased about 7- and 40-fold compared to nifedipine powder in pH 1.2 simulated gastric fluid and pH 6.8 simulated intestinal fluid, respectively. Nifedipine released from CNDE was retarded in both dissolution media compared with that from NDE. After oral administration of NDE, the C(max) and AUC(0→8h) of nifedipine in rat increased about 13- and 7-fold, respectively, and the Tmax of nifedipine was reduced significantly compared with those after oral administration of nifedipine powder alone. The AUC(0→8h) and T(max) of nifedipine in CNDE increased markedly and the C(max) of nifedipine in CNDE was significantly reduced compared to those in NDE. It is concluded that CNDE, which could lower the initial burst-out plasma concentration and maintain the plasma level of nifedipine over a longer period with bioavailability enhancement, might be one of potential alternatives to the marketed long acting oral delivery system for nifedipine.

On the Young's moduli of Ti-6Al-4V alloys

International Nuclear Information System (INIS)

Fan, Zhongyun

1993-01-01

In this paper, the authors will present an iterative approach to Young's modulus of multi-phase composites developed by Fan et al. The iterative approach will then be applied to Ti-6Al-4V alloys to predict their effective Young's moduli. It is hoped that the theoretical predictions will offer a quantitative explanation to the peculiar shape of the E c -f β curve and will shed some light on controlling the Young's moduli of Ti-6Al-4V alloys by choosing the proper heat treatment procedure

Self-Assessment, Preparation and Response Time on a Computerized Oral Proficiency Test

Science.gov (United States)

Malabonga, Valerie; Kenyon, Dorry M.; Carpenter, Helen

2005-01-01

Two studies investigated technical aspects of a computer-mediated test, the Computerized Oral Proficiency Instrument (COPI), particularly in contrast to a similar tape-mediated test, the Simulated Oral Proficiency Interview (SOPI). The first study investigated how examinees used self-assessment to choose an appropriate starting level on the COPI.…

Preparation of poly(acrylonitrile-butyl acrylate) gel electrolyte for lithium-ion batteries

International Nuclear Information System (INIS)

Tian Zheng; He Xiangming; Pu Weihua; Wan Chunrong; Jiang Changyin

2006-01-01

Poly(acrylonitrile-butyl acrylate) gel polymer electrolyte was prepared for lithium ion batteries. The preparation started with synthesis of poly(acrylonitrile-butyl acrylate) by radical emulsion polymerization, followed by phase inversion to produce microporous membrane. Then, the microporous gel polymer electrolytes (MGPEs) was prepared with the microporous membrane and LiPF 6 in ethylene carbonate/diethyl carbonate. The dry microporous membrane showed a fracture strength as high as 18.98 MPa. As-prepared gel polymer electrolytes presented ionic conductivity in excess of 3.0 x 10 -3 S cm -1 at ambient temperature and a decomposition voltage over 6.6 V. The results showed that the as-prepared gel polymer electrolytes were promising materials for Li-ion batteries

Minimization of CYP2D6 Polymorphic Differences and Improved Bioavailability via Transdermal Administration: Latrepirdine Example.

Science.gov (United States)

Chew, Marci L; Mordenti, Joyce; Yeoh, Thean; Ranade, Gautam; Qiu, Ruolun; Fang, Juanzhi; Liang, Yali; Corrigan, Brian

2016-08-01

Transdermal delivery has the potential to offer improved bioavailability by circumventing first-pass gut and hepatic metabolism. This study evaluated the pharmacokinetics of oral immediate release and transdermal latrepirdine in extensive and poor CYP2D6 metabolizers (EM/PM). Latrepirdine transdermal solution was prepared extemporaneously. The solution was applied with occlusive dressing to upper or middle back for 24 h. Each subject received a single dose of 8.14 mg oral, 5 mg transdermal, and 10 mg transdermal (EMs only) latrepirdine free base in a fixed sequence. Twelve EMs and 7 PMs (50-79 years) enrolled and completed the study. Latrepirdine was well tolerated following both routes of administration. Dose-normalized latrepirdine total exposures were approximately 11-fold and 1.5-fold higher in EMs and PMs, respectively following administration of transdermal relative to oral. Differences between EM and PM latrepirdine exposures were decreased, with PMs having 1.9- and 2.7-fold higher peak and total exposures, respectively, following transdermal administration compared to 11- and 20-fold higher exposures, respectively, following oral administration. Transdermal delivery can potentially mitigate the large intersubject differences observed with compounds metabolized primarily by CYP2D6. Transdermal delivery was readily accomplished in the clinic using an extemporaneously prepared solution [NCT00990613].

Aqueous stability and oral pharmacokinetics of meloxicam and carprofen in male C57BL/6 mice.

Science.gov (United States)

Ingrao, Joelle C; Johnson, Ron; Tor, Elizabeth; Gu, Yu; Litman, Marcus; Turner, Patricia V

2013-09-01

We found that carprofen and meloxicam under 3 environmental conditions (ambient dark, ambient light, and 4 °C) remained stable for at least 7 d. We then evaluated the oral pharmacokinetics of meloxicam (20 mg/kg) and carprofen (10 mg/kg) in male C57BL/6 mice after oral gavage or administration in the drinking water. Mice did not drink meloxicam-medicated water but readily consumed carprofen-medicated water, consuming an average of 14.19 mL carprofen-medicated water per 100 g body weight daily; mice drank more during the dark phase than during the light phase. Plasma analyzed by HPLC (meloxicam) and tandem mass spectrometry (carprofen) revealed that the peak meloxicam and carprofen concentrations were 16.7 and 20.3 μg/mL and occurred at 4 and 2 h after oral gavage, respectively. Similar blood levels were achieved after 12 h access to the carprofen-medicated water bottle. At 24 h after oral gavage, the drugs were not detectable in plasma. Meloxicam plasma AUC, elimination half-life, apparent volume of distribution, and apparent oral clearance were 160.4 mg/L × h, 7.4 h, 0.36 L/kg, and 0.125 mL/h × kg, respectively. Carprofen plasma AUC, elimination half-life, apparent volume of distribution, and apparent oral clearance were 160.8 mg/L × h, 7.4 h, 0.42 L/kg, and 0.062 mL/h × kg, respectively. No gross or microscopic evidence of toxicity was seen in any mouse. Our findings indicate that carprofen can be administered in drinking water to mice and that medicated water bottles should be placed 12 to 24 h prior to painful procedures.

Preclinical and clinical pharmacology of oral anticancer drugs

NARCIS (Netherlands)

Oostendorp, R.L.

2009-01-01

Nowadays, more than 25% of all anticancer drugs are developed as oral formulations. Oral administration of drugs has several advantages over intravenous (i.v.) administration. It will on average be more convenient for patients, because they can take oral medication themselves, there is no need for

Oral delivery of capsaicin using MPEG-PCL nanoparticles.

Science.gov (United States)

Peng, Wei; Jiang, Xin-yi; Zhu, Yuan; Omari-Siaw, E; Deng, Wen-wen; Yu, Jiang-nan; Xu, Xi-ming; Zhang, Wei-ming

2015-01-01

To prepare a biodegradable polymeric carrier for oral delivery of a water-insoluble drug capsaicin (CAP) and evaluate its quality. CAP-loaded methoxy poly (ethylene glycol)-poly(ε-caprolactone) nanoparticles (CAP/NPs) were prepared using a modified emulsification solvent diffusion technique. The quality of CAP/NPs were evaluated using transmission electron microscopy, powder X-ray diffraction, differential scanning calorimetry and Fourier transform infrared techniques. A dialysis method was used to analyze the in vitro release profile of CAP from the CAP/NPs. Adult male rats were orally administered CAP/NPs (35 mg/kg), and the plasma concentrations of CAP were measured with a validated HPLC method. The morphology of rat gastric mucosa was studied with HE staining. CAP/NPs had an average diameter of 82.54 ± 0.51 nm, high drug-loading capacity of 14.0% ± 0.13% and high stability. CAP/NPs showed a biphasic release profile in vitro: the burst release was less than 25% of the loaded drug within 12 h followed by a more sustained release for 60 h. The pharmacokinetics study showed that the mean maximum plasma concentration was observed 4 h after oral administered of CAP/NPs, and approximately 90 ng/mL of CAP was detected in serum after 36 h. The area under the curve for the CAP/NPs group was approximately 6-fold higher than that for raw CAP suspension. Histological studies showed that CAP/NPs markedly reduced CAP-caused gastric mucosa irritation. CAP/NPs significantly enhance the bioavailability of CAP and markedly reduce gastric mucosa irritation in rats.

Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) : Part 2: cables for rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)

CERN Document Server

International Electrotechnical Commission. Geneva

2005-01-01

Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) : Part 2: cables for rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)

Convenient synthesis of 6-nor-9,10-dihydrolysergic acid methyl ester.

Science.gov (United States)

Crider, A M; Grubb, R; Bachmann, K A; Rawat, A K

1981-12-01

6-Nor-9,10-dihydrolysergic acid methyl ester (IV) was prepared by demethylation of 9,10-dihydrolysergic acid methyl ester (II) with 2,2,2-trichloroethyl chloroformate, followed by reduction of the intermediate carbamate (III) with zinc in acetic acid. The 6-ethyl-V and 6-n-propyl-VI derivatives were prepared by alkylation of IV with the appropriate halide. All of the ergoline derivatives were evaluated for stereotyped behavior in rats, with 6-nor-6-ethyl-9,10-dihydrolysergic acid methyl ester (V) being active but much less potent than apomorphine. Compound VI was evaluated for its effect on blood pressure; at a dose of 30 mg/kg ip, it significantly lowered, diastolic pressure in normotensive rats.

Efficient Absorption of X-Hydroxyproline (Hyp)-Gly after Oral Administration of a Novel Gelatin Hydrolysate Prepared Using Ginger Protease.

Science.gov (United States)

Taga, Yuki; Kusubata, Masashi; Ogawa-Goto, Kiyoko; Hattori, Shunji

2016-04-13

Recent studies have reported that oral intake of gelatin hydrolysate has various beneficial effects, such as reduction of joint pain and lowering of blood sugar levels. In this study, we produced a novel gelatin hydrolysate using a cysteine-type ginger protease having unique substrate specificity with preferential peptide cleavage with Pro at the P2 position. Substantial amounts of X-hydroxyproline (Hyp)-Gly-type tripeptides were generated up to 2.5% (w/w) concomitantly with Gly-Pro-Y-type tripeptides (5%; w/w) using ginger powder. The in vivo absorption of the ginger-degraded gelatin hydrolysate was estimated using mice. The plasma levels of collagen-derived oligopeptides, especially X-Hyp-Gly, were significantly high (e.g., 2.3-fold for Glu-Hyp-Gly, p < 0.05) compared with those of the control gelatin hydrolysate, which was prepared using gastrointestinal proteases and did not contain detectable X-Hyp-Gly. This study demonstrated that orally administered X-Hyp-Gly was effectively absorbed into the blood, probably due to the high protease resistance of this type of tripeptide.

Oral immunization of mice with engineered Lactobacillus gasseri NM713 strain expressing Streptococcus pyogenes M6 antigen.

Science.gov (United States)

Mansour, Nahla M; Abdelaziz, Sahar A

2016-08-01

The aim of this in vivo study was to evaluate the effects of a recombinant probiotic strain, Lactobacillus gasseri NM713, which expresses the conserved region of streptococcal M6 protein (CRR6), as an oral vaccine against Streptococcus pyogenes. A dose of 10(9) cells of the recombinant strain in 150 μL PBS buffer was administered orally to a group of mice. One control group received an equivalent dose of Lb. gasseri NM613 (containing the empty plasmid without insert) or and another control group received PBS buffer. Each group contained 30 mice. The immunization protocol was followed on three consecutive days, after which two booster doses were administered at two week intervals. Fecal and serum samples were collected from the mice on Days 18, 32, 46, 58 after the first immunization and Day 0 prior to immunization. Anti-CRR6 IgA and IgG concentrations were measured by ELISA in fecal and sera samples, respectively, to assess immune responses. Vaccination with the recombinant Lb. gasseri NM713 strain induced significant protection after nasal challenge with S. pyogenes, only a small percentage of this group developing streptococcal infection (10%) or dying of it (3.3%) compared with the NM613 and PBS control groups, high percentages of which developed streptococcal infection (43.3% and 46.7%, respectively) and died of it (46.7% and 53%, respectively). These results indicate that recombinant Lb. gasseri NM713 has potential as an oral delivery vaccine against streptococcus group A. © 2016 The Societies and John Wiley & Sons Australia, Ltd.

PHARMACOKINETICS OF DICLOFENAC SODIUM AND PAPAVERINE HYDROCHLORIDE AFTER ORAL ADMINISTRATION OF TABLETS TO RABBITS.

Science.gov (United States)

Kasperek, Regina; Zimmer, Łukasz; Jawień, Wojciech; Poleszak, Ewa

2015-01-01

Non-compartmental pharmacokinetic analysis of diclofenac sodium (DIC) and papaverine hydrochloride (PAP) after oral administration of composed tablets to rabbits was developed. HPLC method for determination of DIC and PAP in rabbit plasma was developed and validated. Chromatographic separation of DIC, PAP and the IS was achieved on a Zorbax SB C18 5-µm column (150 mm x 4.6 mm) using methanol-water (55:45, v/v) as mobile phase at a flow rate of 0.8 mL/min. Pharmacokinetic analysis showed that oral administration of a tablet composed of DIC and PAP do not change the pharmacokinetic parameters such as MRT, MAT, Cl and bioavailability of the active substances compared with single administration of DIC and PAP after single dose.

Periodontal Therapy Effects on Nitrite Related to Oral Bacteria: A 6-Month Randomized Clinical Trial.

Science.gov (United States)

Cortelli, Sheila C; Costa, Fernando O; Rodrigues, Edson; Cota, Luis O M; Cortelli, Jose R

2015-08-01

Nitrite is a biologic factor relevant to oral and systemic homeostasis. Through an oral bacteria reduction process, it was suggested that periodontal therapy and chlorhexidine (CHX) rinse could affect nitrite levels, leading to negative effects, such as an increase in blood pressure. This 6-month randomized clinical trial evaluated the effects of periodontal therapeutic protocols on salivary nitrite and its relation to subgingival bacteria. One hundred patients with periodontitis were allocated randomly to debridement procedures in four weekly sections (quadrant scaling [QS]) or within 24 hours (full-mouth scaling [FMS]) in conjunction with a 60-day CHX (QS + CHX and FMS + CHX), placebo (QS + placebo and FMS + placebo), or no mouthrinse (QS + none and FMS + none) use. Real-time polymerase chain reaction determined total bacterial, Aggregatibacter actinomycetemcomitans, Porphyromonas gingivalis, Tannerella forsythia, Treponema denticola, Streptococcus oralis, and Actinomyces naeslundii levels. Salivary nitrite concentration was determined with Griess reagent. Data were analyzed statistically at baseline and 3 and 6 months by analysis of variance, Kruskal-Wallis, Mann-Whitney U, and Spearman correlation tests (P periodontal pockets. The relationship between nitrite and bacterial levels appears weak. Short-term scaling exhibited a greater influence on nitrite concentrations then long-term CHX use.

Betel nut chewing and its deleterious effects on oral cavity

Directory of Open Access Journals (Sweden)

Richa Anand

2014-01-01

Full Text Available The habit of chewing betel nut has a long history of use. Betel nut and products derived from it are widely used as a masticatory product among various communities and in several countries across the world. Over a long period, several additives have been added to a simple betel nut preparation; thus, creating the betel quid (BQ and encompassing chewing tobacco in the preparation. Betel nut has deleterious effects on oral soft tissues. Its effects on dental caries and periodontal diseases, two major oral diseases are less well-documented. Betel-induced lichenoid lesions mainly on buccal mucosa have been reported at quid retained sites. In chronic chewers, a condition called betel chewers mucosa is often found where the quid is placed. Betel nut chewing is implicated in oral submucous fibrosis (OSF and its use along with tobacco can cause leukoplakia, both of which are potentially malignant in the oral cavity. Oral cancer often arises from such precancerous changes. Thus, public health measures to quit betel use are recommended to control disabling conditions such as OSF and oral cancer.

Betel nut chewing and its deleterious effects on oral cavity.

Science.gov (United States)

Anand, Richa; Dhingra, Chandan; Prasad, Sumanth; Menon, Ipseeta

2014-01-01

The habit of chewing betel nut has a long history of use. Betel nut and products derived from it are widely used as a masticatory product among various communities and in several countries across the world. Over a long period, several additives have been added to a simple betel nut preparation; thus, creating the betel quid (BQ) and encompassing chewing tobacco in the preparation. Betel nut has deleterious effects on oral soft tissues. Its effects on dental caries and periodontal diseases, two major oral diseases are less well-documented. Betel-induced lichenoid lesions mainly on buccal mucosa have been reported at quid retained sites. In chronic chewers, a condition called betel chewers mucosa is often found where the quid is placed. Betel nut chewing is implicated in oral submucous fibrosis (OSF) and its use along with tobacco can cause leukoplakia, both of which are potentially malignant in the oral cavity. Oral cancer often arises from such precancerous changes. Thus, public health measures to quit betel use are recommended to control disabling conditions such as OSF and oral cancer.

Iodinated chlorin p6 copper complex induces anti-proliferative effect in oral cancer cells through elevation of intracellular reactive oxygen species.

Science.gov (United States)

Sarbadhikary, Paromita; Dube, Alok

2017-11-01

We investigated the anticancer chemotoxicity of previously reported iodinated chlorin p 6 copper complex (ICp 6 -Cu), a novel chlorophyll derivative in which copper is attached to the side chain carboxylate groups via coordination. Human oral carcinoma cells NT8e, 4451 and the non-cancerous keratinocyte HaCaT cells were treated with ICp 6 -Cu for 48 h in dark and cell viability, proliferation and morphological alterations were examined. ICp 6 -Cu showed pronounced cytotoxicity in cancer cells with IC 50 ∼40 μM, whereas, the viability of HaCaT cells was not affected. Cell proliferation assay revealed that ICp 6 -Cu at IC 50 concentration led to complete inhibition of cell proliferation in both the cell lines. Cell morphology studied by confocal microscopy showed absence of cell death via necrosis or apoptosis. Instead, the treated cells displayed distinct features of non-apoptotic death such as highly vacuolated cytoplasm, lysosomal membrane permeabilization and damage to cytoskeleton F-actin filaments. In addition, ICp 6 -Cu treatment led to time dependent increase in the intracellular level of reactive oxygen species (ROS) and the cytotoxicity of ICp 6 -Cu was significantly inhibited by pre-treatment of cells with antioxidants (glutathione and trolox). These findings revealed that ICp 6 -Cu is a potent chemotoxic agent which can induce cytotoxic effect in cancer cells through elevation of intracellular ROS. It is suggested that ICp 6 -Cu may provide tumor selective chemotoxicity by exploiting difference of redox environment in normal and cancer cells. Copyright © 2017 Elsevier B.V. All rights reserved.

Metronomic therapy with oral 6-mercaptopurine in elderly acute myeloid leukemia: A prospective pilot study

Directory of Open Access Journals (Sweden)

Akhil Kapoor

2016-01-01

Full Text Available Introduction: Acute myeloid leukemia (AML in elderly patients differs biologically from that in younger patients and is known to have unfavorable chromosomal rearrangements, higher resistance, and lower tolerance to chemotherapy. In such circumstances, instead of giving full-blown chemotherapy, palliative metronomic chemotherapy (MCT could be a treatment option. Patients and Methods: We performed a prospective pilot study of old AML patients (age >60 years not amenable to curative treatment. Thirty-two patients were enrolled into the study and were treated with daily oral 6-mercaptopurine 75 mg/m 2 . The following inclusion criteria were used: age >60 years, nonpromyelocytic AML, the absence of uncontrolled comorbidities, and patient not amenable to curative treatment. Overall survival (OS was calculated using Kaplan-Meier method and Cox regression analysis were used to calculate the hazards ratio of significant factors. Results: The median age of the patients was 69 years (range: 61-86 years with male: female ratio of 2.5:1. About 59.4% of patients had Eastern Cooperative Oncology Group performance status of 2 while rest had the status of 3. The median OS was 6 months (95% confidence interval [CI]: 4.4-7.6. Males had median OS of 7 months (95% CI: 5.4-8.6 versus females with OS of 3 months (95% CI: 1.5-4.4; P = 0.008. There was no survival difference on the basis of baseline hemoglobin or French-American-British class. There were no Grade 4 toxicities and no episode of febrile neutropenia. Conclusions: MCT with oral 6-mercaptopurine is an attractive treatment option in elderly AML patients who are not amenable to curative therapy with minimal toxicities.

Inhibition of interleukin-6 expression by the V protein of parainfluenza virus 5

International Nuclear Information System (INIS)

Lin Yuan; Sun Minghao; Fuentes, Sandra M.; Keim, Celia D.; Rothermel, Terri; He Biao

2007-01-01

The V protein of parainfluenza virus 5 (PIV5) plays an important role in the evasion of host immune responses. The V protein blocks interferon (IFN) signaling in human cells by causing degradation of the STAT1 protein, a key component of IFN signaling, and blocks IFN-β production by preventing nuclear translocation of IRF3, a key transcription factor for activating IFN-β promoter. Interleukin-6 (IL-6), along with tumor necrosis factor (TNF)-α and IL-1β, is a major proinflammatory cytokine that plays important roles in clearing virus infection through inflammatory responses. Many viruses have developed strategies to block IL-6 expression. Wild-type PIV5 infection induces little, if any, expression of cytokines such as IL-6 or TNF-α, whereas infection by a mutant PIV5 lacking the conserved C-terminal cysteine rich domain (rPIV5VΔC) induced high levels of IL-6 expression. Examination of mRNA levels of IL-6 indicated that the transcription activation of IL-6 played an important role in the increased IL-6 expression. Co-infection with wild-type PIV5 prevented the activation of IL-6 transcription by rPIV5VΔC, and a plasmid encoding the full-length PIV5 V protein prevented the activation of IL-6 promoter-driven reporter gene expression by rPIV5VΔC, indicating that the V protein played a role in inhibiting IL-6 transcription. The activation of IL-6 was independent of IFN-β even though rPIV5VΔC-infected cells produced IFN-β. Using reporter gene assays and chromatin immunoprecipitation (ChIP), it was found that NF-κB played an important role in activating expression of IL-6. We have proposed a model of activating and inhibiting IL-6 transcription by PIV5

A 6.13MeV gamma reference source, measurement of the emission rate

International Nuclear Information System (INIS)

Robert, Andre; Blondel, Maurice; Morel, Jean; Thomas, Claude.

1977-08-01

A 6.13MeV γ reference source has been produced by using 13 C(α, nγ) 16 O reaction occurring in an intimate 13 C and 238 Pu mixture. With two walls made leak proof this standard source is easy handled and convenient to the calibration of detectors. The 6.13MeV gamma ray is emitted without Doeppler effect, is measured with an uncertainty of 6% by three independent methods [fr

High-resolution Auger spectroscopy on 79 MeV Ar5+, 89 MeV Ar6+, and 136 MeV Ar7+ ions after excitation by helium

International Nuclear Information System (INIS)

Schneider, T.

1988-01-01

In this thesis the atomic structure of highly excited Ar 6+ and Ar 7+ ions was studied. For this 79 MeV Ar 5+ , 89 MeV Ar 6+ , and 136 MeV Ar 7+ ions of a heavy ion accelerator were excited by a He gas target to autoionizing states and the Auger electrons emitted in the decay were measured in highly-resolving state. The spectra were taken under an observational angle of zero degree relative to the beam axis in order to minimize the kinematical broadening of the Auger lines. (orig./HSI) [de

6 MeV RF Linac for cargo scanning and industrial radiography

International Nuclear Information System (INIS)

2017-01-01

RF Linac-based X-ray sources are very widely used for cargo-scanning and industrial X-ray radiography applications. A 6 MeV on-axis coupled-cavity S-band RF linac has been designed, developed and tested successfully at Electron Beam Centre, Navi Mumbai. This facility falls under the purview of BARC Safety Council, which has conducted safety reviews and awarded regulatory clearances for the operation of the linac system. This paper outlines the salient features of the 6 MeV linac, its safety aspects and test results. A brief history of regulatory aspects is also presented

Preparative separation and purification of bufadienolides from ChanSu by high-speed counter-current chromatography combined with preparative HPLC

Energy Technology Data Exchange (ETDEWEB)

Li, Jialian; Zhang, Yongqing, E-mail: fleiv@163.com [College of Pharmacy, Shandong University of Traditional Chinese Medicine, Jinan, Shandong (China); Lin, Yunliang; Wang, Xiao; Fang, Lei; Geng, Yanling [Shandong Analysis and Test Center, Shandong Academy of Sciences, Jinan, Shandong (China); Zhang, Qinde [Shandong College of Traditional Chinese Medicine, Laiyang, Shandong (China)

2013-09-01

Eight bufadienolides were successfully isolated and purified from ChanSu by high-speed counter-current chromatography (HSCCC) combined with preparative HPLC (prep-HPLC). First, a stepwise elution mode of HSCCC with the solvent system composed of petroleum ether-ethyl acetate-methanol-water (4:6:4:6, 4:6:5:5, v/v) was employed and four bufadienolides, two partially purified fractions were obtained from 200 mg of crude extract. The partially purified fractions III and VI were then further separated by prepHPLC, respectively, and another four bufadienolides were recovered. Their structures were confirmed by ESI-MS and {sup 1}H-NMR spectra. (author)

Improving oral bioavailability of resveratrol by a UDP-glucuronosyltransferase inhibitory excipient-based self-microemulsion.

Science.gov (United States)

Yang, Fei-Fei; Zhou, Jing; Hu, Xiao; Cong, Zhao-Qing; Liu, Chun-Yu; Pan, Rui-Le; Chang, Qi; Liu, Xin-Min; Liao, Yong-Hong

2018-03-01

Self-microemulsifying (SME) drug delivery system has been developed to increase oral bioavailabilities, and inhibitory excipients are capable of improving oral bioavailability by inhibiting enzyme mediated intestinal metabolism. However, the potential of enzyme inhibitory excipients containing SME in boosting resveratrol bioavailability remains largely uninvestigated. In this study, we set out to prepare SME-1 with UGT inhibitory excipients (excipients without inhibitory activities named SME-2 as control) to increase the bioavailability of RES by inhibiting intestinal metabolism. Results demonstrated that similar physicochemical properties such as size, polydistribution index and in vitro release, cellular uptake and permeability in Caco-2 cells as well as in vivo lymphatic distribution between inhibitory SME-1 and non-inhibitory SME-2 were observed. In vivo study demonstrated that the molar ratios of RES-G/RES were 7.25±0.48 and 5.06±2.42 for free drug and SME-2, respectively, and the molar ratio decreased to 0.36±0.10 in SME-1 group. Pharmacokinetic study confirmed that the inhibitory excipients containing SME demonstrated potential in increasing bioavailability of RES from 6.5% for the free RES and 12.9% for SME-2 to 76.1% in SME-1 through modulating the glucuronidation by UGT inhibitory excipients. Copyright © 2018 Elsevier B.V. All rights reserved.

Exploring the oral microbiota of children at various developmental stages of their dentition in the relation to their oral health

Directory of Open Access Journals (Sweden)

Montijn Roy C

2011-03-01

Full Text Available Abstract Background An understanding of the relation of commensal microbiota to health is essential in preventing disease. Here we studied the oral microbial composition of children (N = 74, aged 3 - 18 years in natural transition from their deciduous to a permanent dentition and related the microbial profiles to their oral health status. The microbial composition of saliva was assessed by barcoded pyrosequencing of the V5-V6 hypervariable regions of the 16 S rRNA, as well as by using phylogenetic microarrays. Results Pyrosequencing reads (126174 reads, 1045 unique sequences represented 8 phyla and 113 higher taxa in saliva samples. Four phyla - Firmicutes, Bacteriodetes, Proteobacteria and Actinobacteria - predominated in all groups. The deciduous dentition harboured a higher proportion of Proteobacteria (Gammaproteobacteria, Moraxellaceae than Bacteroidetes, while in all other groups Bacteroidetes were at least as abundant as Proteobacteria. Bacteroidetes (mainly genus Prevotella, Veillonellaceae family, Spirochaetes and candidate division TM7 increased with increasing age, reflecting maturation of the microbiome driven by biological changes with age. Microarray analysis enabled further analysis of the individual salivary microbiota. Of 350 microarray probes, 156 gave a positive signal with, on average, 77 (range 48-93 probes per individual sample. A caries-free oral status significantly associated with the higher signal of the probes targeting Porphyromonas catoniae and Neisseria flavescens. Conclusions The potential role of P. catoniae and N. flavescens as oral health markers should be assessed in large-scale clinical studies. The combination of both, open-ended and targeted molecular approaches provides us with information that will increase our understanding of the interplay between the human host and its microbiome.

Synthesis of the Novel 4,4?- and 6,6?- Dihydroxamic - 2,2?-Bipyridines and Improved Routes to 4,4?- and 6,6?- Substituted 2,2?-Bipyridines and Mono-N-Oxide-2,2?-Bipyridine

Directory of Open Access Journals (Sweden)

Donnici Claudio Luis

1998-01-01

Full Text Available The preparation of key precursors for many 2,2?-bipyridine derivatives such as 4,4?-dicarboxy- 2,2?-bipyridine (I, 6,6?-dicarboxy-2,2?-bipyridine- acid (II, 4,4?-dinitro-2,2?-bipyridine-N,N-dioxide (III, 6,6?-dicarbothioamide-2,2?-bipyridine (IV and mono-N-oxide-2,2?-bipyridine (VII through more efficient methods is described. The syntheses of the novel ligands 4,4?-dihydroxamic-2,2?-bipyridine (V and 6,6?-dihydroxamic-2,2?-bipyridine (VI are also reported.

Genesis of Microstructures in Friction Stir Welding of Ti-6Al-4V

Science.gov (United States)

Tchein, Gnofam Jacques; Jacquin, Dimitri; Coupard, Dominique; Lacoste, Eric; Girot Mata, Franck

2018-03-01

This paper is focused on the genesis of microstructures in friction stir welding (FSW) of the Ti-6Al-4V alloy. Several titanium joints, initially prepared with four different preheat treatments, were processed by FSW. Detailed microstructural analyses were performed in order to investigate change in the microstructure during the process. In this work, the FSW processing allows a controlled and stable microstructure to be produced in the stirring zone, regardless of the initial heat treatment or the welding conditions. The welded material undergoes a severe thermomechanical treatment which can be divided into two steps. First, the friction in the shoulder and the plastic strain give rise to the necessary conditions to allow a continuous dynamic recrystallization of the β phase. This operation produces a fine and equiaxed β grain structure. Second, once the pin has moved away, the temperature decreases, and the material undergoes a heat treatment equivalent to air quenching. The material thus exhibits a β → β + α transformation with germination of a fine intergranular Widmanstätten phase within the ex-fully-recrystallized-β grains.

Genesis of Microstructures in Friction Stir Welding of Ti-6Al-4V

Science.gov (United States)

Tchein, Gnofam Jacques; Jacquin, Dimitri; Coupard, Dominique; Lacoste, Eric; Girot Mata, Franck

2018-06-01

This paper is focused on the genesis of microstructures in friction stir welding (FSW) of the Ti-6Al-4V alloy. Several titanium joints, initially prepared with four different preheat treatments, were processed by FSW. Detailed microstructural analyses were performed in order to investigate change in the microstructure during the process. In this work, the FSW processing allows a controlled and stable microstructure to be produced in the stirring zone, regardless of the initial heat treatment or the welding conditions. The welded material undergoes a severe thermomechanical treatment which can be divided into two steps. First, the friction in the shoulder and the plastic strain give rise to the necessary conditions to allow a continuous dynamic recrystallization of the β phase. This operation produces a fine and equiaxed β grain structure. Second, once the pin has moved away, the temperature decreases, and the material undergoes a heat treatment equivalent to air quenching. The material thus exhibits a β → β + α transformation with germination of a fine intergranular Widmanstätten phase within the ex-fully-recrystallized- β grains.

Preparation and characterization of 1,6 anhydrous Β-D-Glucopyranose from starch

International Nuclear Information System (INIS)

Alvarez Lopez, M.S.

1991-01-01

In order to prepare 2-deoxi-2-fluoride-D-glucosa (2FDG) in an inert form there are several synthesis methods, but the more interesting one for our study is based in a reaction from the 1,6 anhydrous, Β-D-glucopyranose (1,6AGP), in an attempt to compare the labelling efficiency rate of 2FDG with F-18, which is highly used in nuclear medicine. In the present paper the attainment of starch from white potatoe, infrared analysis of this starch and fusion point are included. Also results are compared with an analytical reactive standard. The process of preparation of 1,6AGP by pyrolysis of starch under reduced pressure, its separation and purification by crystallization and infrared characterization of 1,6AGP, nuclear magnetic resonance and mass spectrometry are also included. 10 kg. of potatoes were used, and 93059 g. ±5.8 of starch with an efficiency rate of 9.32 ±0.631; fusion point was 272 o C and there was a 9.83 ± 1.48 % of humidity. After the pyrolysis, crystallization an purification processes, 1.71 ±0.54 % of 1,6AGP were obtained. Later results of compound characterization, nuclear magnetic resonance, infrared and mass spectrometry were compared with a commercial product and it was proved that it corresponds to such pure compound. (Author)

High-performance Li3V2(PO4)3/C cathode materials prepared via a sol–gel route with double carbon sources

International Nuclear Information System (INIS)

Zhang Lulu; Li Ying; Peng Gang; Wang Zhaohui; Ma Jun; Zhang Wuxing; Hu Xianluo; Huang Yunhui

2012-01-01

Graphical abstract: Double carbon sources were employed to prepare core–shell Li 3 V 2 (PO 4 ) 3 /C composites, giving rise to uniform carbon coating and high conducting network. The as-obtained composites showed remarkably enhanced capacity and rate capability. Highlights: ► Double carbon sources were used to prepare core–shell Li 3 V 2 (PO 4 ) 3 /C composites. ► An improved oxalic acid-based sol–gel method was developed. ► Uniform carbon coating and high conducting network were attained for Li 3 V 2 (PO 4 ) 3 . ► Remarkably enhanced capacity and rate capability were obtained. - Abstract: Li 3 V 2 (PO 4 ) 3 /C (LVP/C) composites have been successfully synthesized via an oxalic acid-based sol–gel process assisted by glucose, in which oxalic acid and glucose serve as double carbon sources. X-ray diffraction patterns show that all samples are well crystallized. Transmission electron microscopy images reveal that the LVP/C sample prepared with 15 wt% glucose is uniformly coated by carbon layer with an appropriate thickness of 8–10 nm, resulting in a high electrical conductivity and a fast kinetics. The Li + -ion diffusion coefficient in the LVP/C sample prepared with glucose is ∼10 −10 cm 2 s −1 , which is larger than that of the LVP/C sample prepared without glucose. The LVP/C sample prepared with 15 wt% glucose exhibits the best electrochemical performance with discharge capacity as high as 171 mAh g −1 at 0.1 C and 119 mAh g −1 at 10 C. The present work provides a valuable route for preparing lithium metal phosphates with double carbon sources to improve the conductivity and hence the electrochemical performance.

Synthesis and characterization of Cu/sub 11/V/sub 6/O/sub 26/ as high -- capacity cathodes for lithium secondary batteries via a wet chemistry route

International Nuclear Information System (INIS)

Yuan, C.; Binqiang, M.A.; Suhong, L.U.

2009-01-01

The cathode material of Cu/sub 11/ V/sub 6/O/sub 26/ has been synthesized for the lithium secondary batteries via the wet-chemistry method. The as-prepared powders were characterized by powder X-ray diffraction (XRD), scanning electron microscope (SEM) and laser particle size analysis (LPSA) The electrochemical performances were evaluated by the galvanostatic discharge-charge and cyclic voltammetry technique. These results revealed that Cu/sub 11/ V/sub 6/O/sub 26/ powder could be formed at a temperature as low as 300 degree C, and its particle size was smaller and distributed in a narrower range compared to the other powders synthesized at 400 degree C and 500 degree C. The initial discharge capacity of the powder synthesized at 300 degree C whose D/sub 50/ was only 24.251 macro m was 318.2 mAh/g. It was also found that a severe structure modification of Cu/sub 11/ V/sub 6/ O/sub 26/ powder might take place after the first cycle according to cyclic voltammetry test, which should be responsible for its irreversible capacity. (author)

Vicarious nucleophilic substitution to prepare 1,3-diamino-2,4,6-trinitrobenzene or 1,3,5-triamino-2,4,6-trinitrobenzene

Science.gov (United States)

Mitchell, Alexander R.; Pagoria, Philip F.; Schmidt, Robert D.

1996-01-01

The present invention relates to a process to produce 1,3-diamino-2,4,6-trinitrobenzene (DATB) or 1,3,5-triamino-2,4,6,-trinitrobenzene (TATB) by: (a) reacting at ambient pressure and a temperature of between about 0.degree. and 50.degree. C. for between about 0.1 and 24 hr, a trinitroaromatic compound of structure V: ##STR1## wherein X, Y, and Z are each independently selected from --H, or --NH.sub.2, with the proviso that at least 1 or 2 of X, Y, and Z are hydrogen, with an amount effective to produce DATB or TATB of 1,1,1-trialkylhydrazinium halide wherein alkyl is selected from methyl, ethyl, propyl or butyl and halide is selected from chloride, bromide or iodide. in the presence of a strong base selected from sodium butoxide, potassium butoxide, potassium propoxide, sodium propoxide, sodium ethoxide, potassium ethoxide, sodium methoxide, potassium methoxide, and combinations thereof; in a solvent selected from the group consisting of methanol, ethanol, propanol, butanol, dimethylsulphoxide, N-methylpyrrolidone, hexamethylphosphoramide, dimethylformide, dimethylacetamide and mixtures thereof, provided that when alcohols are present primarily DATB and picramide is formed; and (b) isolating the DATB or TATB produced. DATB and TATB are useful specialty explosives. TATB is also used for the preparation of benzenehexamine, a starting material for the synthesis of novel materials (optical imaging devices, liquid crystals, ferromagnetic compounds).

Preparation of poly(acrylonitrile-butyl acrylate) gel electrolyte for lithium-ion batteries

Energy Technology Data Exchange (ETDEWEB)

Tian Zheng [Institute of Nuclear and New Energy Technology, Tsinghua University, Beijing 100084 (China); He Xiangming [Institute of Nuclear and New Energy Technology, Tsinghua University, Beijing 100084 (China)]. E-mail: hexm@tsinghua.edu.cn; Pu Weihua [Institute of Nuclear and New Energy Technology, Tsinghua University, Beijing 100084 (China); Wan Chunrong [Institute of Nuclear and New Energy Technology, Tsinghua University, Beijing 100084 (China); Jiang Changyin [Institute of Nuclear and New Energy Technology, Tsinghua University, Beijing 100084 (China)

2006-10-25

Poly(acrylonitrile-butyl acrylate) gel polymer electrolyte was prepared for lithium ion batteries. The preparation started with synthesis of poly(acrylonitrile-butyl acrylate) by radical emulsion polymerization, followed by phase inversion to produce microporous membrane. Then, the microporous gel polymer electrolytes (MGPEs) was prepared with the microporous membrane and LiPF{sub 6} in ethylene carbonate/diethyl carbonate. The dry microporous membrane showed a fracture strength as high as 18.98 MPa. As-prepared gel polymer electrolytes presented ionic conductivity in excess of 3.0 x 10{sup -3} S cm{sup -1} at ambient temperature and a decomposition voltage over 6.6 V. The results showed that the as-prepared gel polymer electrolytes were promising materials for Li-ion batteries.

Preparation of radioiodinated insulin and thyroid stimulating hormone using 1,3,4,6-tetrachloro-3. cap alpha. , 6. cap alpha. -diphenylglycouril (iodogen) for radioimmunoassay

Energy Technology Data Exchange (ETDEWEB)

Pillai, M R.A.; Gupte, J H; Jyotsna, T; Mani, R S

1987-11-01

Radioiodinated insulin and thyroid stimulating hormones were prepared using 1,3,4,6-tetrachloro-3..cap alpha.., 6..cap alpha..-diphenylglycouril (iodogen). Conditions of iodination like concentration of iodogen, reaction time, etc. were optimized to get maximum yield. Stability studies of iodogen coated tubes were carried out over a period of time. The dependence of iodination yield on varying amounts of activity and protein concentration were investigated. Iodination yield over a range of pH was also studied. The radiolabelled hormones prepared by this method were used in radioimmunoassay and compared with tracers prepared by the Chloramine-T method. (author) 16 refs.; 5 tabs.

Strain-related acid production by oral streptococci

DEFF Research Database (Denmark)

de Soet, JJ; Nyvad, Bente; Kilian, Mogens

2000-01-01

Acid production, in particular at low pH, is thought to be an important ecological determinant in dental caries. The aim of the present study was to determine the acid producing capability at different pH levels of 47 streptococcal strains, representing 9 species, isolated from human dental plaque....... The bacteria were grown until mid log-phase under anaerobic conditions and acid production was measured in a pH-stat system at pH 7.0, 6.0, 5.5 and 5.0. At all pH values, the mean velocity of acid production (V(ap)) by Streptococcus mutans and S. sobrinus was significantly higher (p... that of the other oral streptococci, including S. mitis, S. oralis, S. gordonii, S. sanguis, S. intermedius, S. anginosus, S. constellatus, and S. vestibularis. However, the V(ap) of some strains of S. mitis biovar 1 and S. oralis, particularly at pH values of 7.0 and 6.0, exceeded that of some strains of S. mutans...

Pharmacokinetics of fluconazole following intravenous and oral administration to koalas (Phascolarctos cinereus).

Science.gov (United States)

Black, L A; Krockenberger, M B; Kimble, B; Govendir, M

2014-02-01

Clinically normal koalas (n = 12) received a single dose of 10 mg/kg fluconazole orally (p.o.; n = 6) or intravenously (i.v.; n = 6). Serial plasma samples were collected over 24 h, and fluconazole concentrations were determined using a validated HPLC assay. A noncompartmental pharmacokinetic analysis was performed. Following i.v. administration, median (range) plasma clearance (CL) and steady-state volume of distribution (Vss ) were 0.31 (0.11-0.55) L/h/kg and 0.92 (0.38-1.40) L/kg, respectively. The elimination half-life (t1/2 ) was much shorter than in many species (i.v.: median 2.25, range 0.98-6.51 h; p.o.: 4.69, range 2.47-8.01 h), and oral bioavailability was low and variable (median 0.53, range 0.20-0.97). Absorption rate-limited disposition was evident. Plasma protein binding was 39.5 ± 3.5%. Although fluconazole volume of distribution (Varea ) displayed an allometric relationship with other mammals, CL and t1/2 did not. Allometrically scaled values were approximately sevenfold lower (CL) and sixfold higher (t1/2 ) than observed values, highlighting flaws associated with this technique in physiologically distinct species. On the basis of fAUC/MIC pharmacodynamic targets, fluconazole is predicted to be ineffective against Cryptococcus gattii in the koala as a sole therapeutic agent administered at 10 mg/kg p.o. every 12 h. © 2013 John Wiley & Sons Ltd.

Oral Insulin - Fact or Fiction?

Indian Academy of Sciences (India)

attempts have explored the following options, either singly, or together: • Protecting ... derivative of insulin has been seen to maintain its biological activity and also have .... that in the short future any oral preparation that can achieve consistent ...

Mesoporous Bioactive Glass Functionalized 3D Ti-6Al-4V Scaffolds with Improved Surface Bioactivity.

Science.gov (United States)

Ye, Xiaotong; Leeflang, Sander; Wu, Chengtie; Chang, Jiang; Zhou, Jie; Huan, Zhiguang

2017-10-27

Porous Ti-6Al-4V scaffolds fabricated by means of selective laser melting (SLM), having controllable geometrical features and preferable mechanical properties, have been developed as a class of biomaterials that hold promising potential for bone repair. However, the inherent bio-inertness of the Ti-6Al-4V alloy as the matrix of the scaffolds results in a lack in the ability to stimulate bone ingrowth and regeneration. The aim of the present study was to develop a bioactive coating on the struts of SLM Ti-6Al-4V scaffolds in order to add the desired surface osteogenesis ability. Mesoporous bioactive glasses (MBGs) coating was applied on the strut surfaces of the SLM Ti-6Al-4V scaffolds through spin coating, followed by a heat treatment. It was found that the coating could maintain the characteristic mesoporous structure and chemical composition of MBG, and establish good interfacial adhesion to the Ti-6Al-4V substrate. The compressive strength and pore interconnectivity of the scaffolds were not affected by the coating. Moreover, the results obtained from in vitro cell culture experiments demonstrated that the attachment, proliferation, and differentiation of human bone marrow stromal cells (hBMSCs) on the MBG-coated Ti-6Al-4V scaffolds were improved as compared with those on the conventional bioactive glass (BG)-coated Ti-6Al-4V scaffolds and bare-metal Ti-6Al-4V scaffolds. Our results demonstrated that the MBG coating by using the spinning coating method could be an effective approach to achieving enhanced surface biofunctionalization for SLM Ti-6Al-4V scaffolds.

Mesoporous Bioactive Glass Functionalized 3D Ti-6Al-4V Scaffolds with Improved Surface Bioactivity

Directory of Open Access Journals (Sweden)

Xiaotong Ye

2017-10-01

Full Text Available Porous Ti-6Al-4V scaffolds fabricated by means of selective laser melting (SLM, having controllable geometrical features and preferable mechanical properties, have been developed as a class of biomaterials that hold promising potential for bone repair. However, the inherent bio-inertness of the Ti-6Al-4V alloy as the matrix of the scaffolds results in a lack in the ability to stimulate bone ingrowth and regeneration. The aim of the present study was to develop a bioactive coating on the struts of SLM Ti-6Al-4V scaffolds in order to add the desired surface osteogenesis ability. Mesoporous bioactive glasses (MBGs coating was applied on the strut surfaces of the SLM Ti-6Al-4V scaffolds through spin coating, followed by a heat treatment. It was found that the coating could maintain the characteristic mesoporous structure and chemical composition of MBG, and establish good interfacial adhesion to the Ti-6Al-4V substrate. The compressive strength and pore interconnectivity of the scaffolds were not affected by the coating. Moreover, the results obtained from in vitro cell culture experiments demonstrated that the attachment, proliferation, and differentiation of human bone marrow stromal cells (hBMSCs on the MBG-coated Ti-6Al-4V scaffolds were improved as compared with those on the conventional bioactive glass (BG-coated Ti-6Al-4V scaffolds and bare-metal Ti-6Al-4V scaffolds. Our results demonstrated that the MBG coating by using the spinning coating method could be an effective approach to achieving enhanced surface biofunctionalization for SLM Ti-6Al-4V scaffolds.

Oral omega-6 essential fatty acid treatment in contact lens associated dry eye.

Science.gov (United States)

Kokke, Karolien H; Morris, Judith A; Lawrenson, John G

2008-06-01

Symptoms of dry eye are commonly reported in contact lens wearers and are a frequent cause of non-tolerance. The purpose of the present study is to evaluate the effects of oral treatment with particular omega-6 fatty acids in the form of evening primrose oil (EPO) on subjective symptoms, ocular surface signs and tear film characteristic in patients with contact lens associated dry eye. The study design was randomised, double-masked and placebo controlled. 76 female soft contact lens wearers were treated for 6 months with either EPO or placebo (olive oil). Subjects underwent three examinations (baseline, 3 and 6 months). At each examination subjects were given a questionnaire relating to lens comfort and dry eye symptoms and underwent a series of tests of tear film characteristics (tear meniscus height, break-up time), meibomian gland function (lipid layer thickness and quality) and ocular surface parameters (hyperaemia and staining). The EPO group showed a significant improvement in the specific symptom of 'dryness' at 3 and 6 months (porally administered omega-6 fatty acids in alleviating dry eye symptoms and improving overall lens comfort in patients suffering from contact lens associated dry eye.

A Review of the Fatigue Properties of Additively Manufactured Ti-6Al-4V

Science.gov (United States)

Cao, Fei; Zhang, Tiantian; Ryder, Matthew A.; Lados, Diana A.

2018-03-01

Various additive manufacturing (AM) technologies have been used to fabricate Ti-6Al-4V. The fatigue performance of Ti-6Al-4V varies from process to process. In this review, fatigue properties of Ti-6Al-4V alloys made by different AM technologies and post-fabrication treatments were compiled and discussed to correlate with the materials' characteristic features, primarily surface roughness and porosity. Microstructure anisotropy and porosity effects on fatigue crack growth and fatigue life are also presented and discussed. A modified Kitagawa-Takahashi diagram developed from current available fatigue data was used to quantify the influence of defects on fatigue strength. This review aims to assist in selecting/optimizing AM processes to achieve high fatigue resistance in Ti-6Al-4V, as well as provide a better understanding of the advantages and limitations of current AM techniques in producing titanium alloys.

Stability of [6]-gingerol and [6]-shogaol in simulated gastric and intestinal fluids.

Science.gov (United States)

Bhattarai, Sushila; Tran, Van H; Duke, Colin C

2007-11-30

The degradation kinetics of [6]-gingerol and [6]-shogaol were investigated in simulated gastric (pH 1) and intestinal (pH 7.4) fluids at 37 degrees C. Degradation products were quantitatively determined by HPLC (Lichrospher 60 RP select B column, 5 microm, 125 mm x 4 mm; mobile phase: methanol-water-acetic acid (60:39:1 v/v); flow rate: 0.6 ml/min; detection UV: 280 nm). In simulated gastric fluid (SGF) [6]-gingerol and [6]-shogaol underwent first-order reversible dehydration and hydration reactions to form [6]-shogaol and [6]-gingerol, respectively. The degradation was catalyzed by hydrogen ions and reached equilibrium at approximately 200 h. In simulated intestinal fluid (SIF) both [6]-gingerol and [6]-shogaol showed insignificant interconversion between one another. Addition of amino acids glycine, 3-amino propionic acid (beta-alanine) and gamma-amino butyric acid (GABA), and ammonium acetate at a range of concentrations of 0.05-0.5mM had no effect on the rate of degradation of [6]-shogaol in SGF and 0.1M HCl solution. However, at exceedingly high concentration (0.5M) of ammonium acetate and glycine, significant amounts of [6]-shogaol ammonia and glycine adducts were detected. The degradation profile of [6]-gingerol and [6]-shogaol under simulated physiological conditions reported in this study will provide insight into the stability of these compounds when administered orally.