WorldWideScience

Sample records for optimal growth conditions

  1. Optimal growth conditions for Isochrysis galbana

    Kaplan, D; Cohen, Z; Abeliovich, A

    1986-01-01

    Environmental and nutritional growth conditions of the unicellular microalga Isochrysis galbana were studied under laboratory conditions. The information obtained was used for cultivating the alga in outdoor miniponds. Outdoor cultures stayed monoalgal and free of predators as long as the temperature did not fall below 19 degrees C and the rate of dilution did not exceed 40% of the culture's volume. Isochrysis galbana grown in outdoor cultures provided lipid concentrations of 24-28% of ash free dry matter. 12 references.

  2. Optimization of growth medium and fermentation conditions for ...

    A sequential optimization approach based on statistical experimental designs was employed to optimize growth medium and fermentation conditions, in order to improve the antibiotic activity of Xenorhabdus nematophila TB. Tryptone soyptone broth (TSB) was chosen as the original medium for optimization. Glucose and ...

  3. Optimizing growth conditions for electroless deposition of Au films ...

    Unknown

    Optimizing growth conditions for electroless deposition of Au films on. Si(111) substrates. BHUVANA and G U KULKARNI*. Chemistry and Physics of Materials Unit and DST Unit on Nanoscience, Jawaharlal Nehru Centre for. Advanced Scientific Research, Jakkur PO, Bangalore 560 064, India. MS received 24 March 2006.

  4. Optimal Conditions for the Mycelial Growth of Coprinus comatus Strains

    Lee, Yun-Hae; Liu, Jun-Jie; Ju, Young-Cheol

    2009-01-01

    The principal objective of this study was to acquire basic data regarding the mycelial growth characteristics for the artificial cultivation of Coprinus comatus. 12 URP primers were employed to evaluate the genetic relationships of C. comatus, and the results were divided into three groups. Among six kinds of mushroom media, MYP medium was selected as the most favorable culture medium for C. comatus. The optimal temperature and pH ranges for the mycelial growth of C. comatus were 23~26℃ and pH 6~8, respectively. The carbon and nitrogen sources for optimal mycelial growth were sucrose and tryptone, respectively. PMID:23983517

  5. Optimizing Growth Conditions for Digoxin Production in Digitalis lanata Ehrh

    Herman A. van Wietmarschen

    2016-08-01

    Full Text Available Objective: Digoxin is a therapeutic cardenolide widely used to treat various heart conditions such as atrial flutter, atrial fibrillation and heart failure in both Western as well as Chinese medicine. Digoxin is extracted from cultivated Digitalis lanata Ehrh. plants, known as Mao Hua Yang Di Huang in Chinese medicine. This manuscript presents two studies that were conducted to optimize the cultivation conditions for digoxin production in the TCM Mao Hua Yan Di Huang in a greenhouse under GAP conditions.

  6. The growth response of plants to elevated CO2 under non-optimal environmental conditions

    Poorter, H.; Pérez-Soba, M.

    2001-01-01

    Under benign environmental conditions, plant growth is generally stimulated by elevated atmospheric CO2 concentrations. When environmental conditions become sub- or supra-optimal for growth, changes in the biomass enhancement ratio (BER; total plant biomass at elevated CO2 divided by plant biomass

  7. Optimization of induction, subculture conditions, and growth kinetics of Angelica sinensis (Oliv.) Diels callus.

    Huang, Bing; Han, Lijuan; Li, Shaomei; Yan, Chunyan

    2015-01-01

    Angelica sinensis (Oliv.) Diels is an important traditional Chinese medicine, and the medicinal position is its root. This perennial herb grows vigorously only in specific areas and the environment. Tissue culture induction of callus and plant regeneration is an important and effective way to obtain large scale cultures of A. sinensis. The objective was to optimize the inductive, subculture conditions, and growth kinetics of A. sinensis. Tissue culture conditions for A. sinensis were optimized using leaves and petioles (types I and II) as explants source. Murashige and Skoog (MS) and H media supplemented with 30 g/L sucrose, 7.5 g/L agar, and varying concentrations of plant growth regulators were used for callus induction. In addition, four different basal media supplemented with 1.0 mg/L 2,4-dichlorophenoxy acetic acid (2,4-D), 0.2 mg/L 6-benzyladenine (BA) and 30 g/L sucrose were optimized for callus subculture. Finally, growth kinetics of A. sinensis cultured on different subculture media was investigated based on callus properties, including fresh weight, dry weight, medium pH, callus relative fresh weight growth, callus relative growth rate (CRGR), and sucrose content. MS medium supplemented with 5 mg/L α-naphthaleneacetic acid, 0.5 mg/L BA, 0.7 mg/L 2,4-D, 30 g/L sucrose and 7.5 g/L agar resulted in optimal callus induction in A. sinensis while petiole I was found as the best plant organ for callus induction. The B5 medium supplemented with 1.0 mg/L 2,4-D, 0.2 mg/L BA and 30 g/L sucrose displayed the best results in A. sinensis callus subculture assays. The optimized conditions could be one of the most potent methods for large-scale tissue culture of A. sinensis.

  8. Controlled growth of CNT in mesoporous AAO through optimized conditions for membrane preparation and CVD operation

    Ciambelli, P; Sarno, M; Leone, C; Sannino, D [Department of Chemical and Food Engineering, University of Salerno, I-84084 Fisciano (Italy); Arurault, L; Fontorbes, S; Datas, L; Lenormand, P; Le Blond Du Plouy, S, E-mail: msarno@unisa.it, E-mail: arurault@chimie.ups-tlse.fr [Universite de Toulouse, CIRIMAT, UPS/INPT/CNRS, LCMIE, F-31062 Toulouse Cedex 9 (France)

    2011-07-01

    Anodic aluminium oxide (RAAO) membranes with a mesoporous structure were prepared under strictly controlling experimental process conditions, and physically and chemically characterized by a wide range of experimental techniques. Commercial anodic aluminium oxide (CAAO) membranes were also investigated for comparison. We demonstrated that RAAO membranes have lower content of both water and phosphorus and showed better porosity shape than CAAO. The RAAO membranes were used for template growth of carbon nanotubes (CNT) inside its pores by ethylene chemical vapour deposition (CVD) in the absence of a catalyst. A composite material, containing one nanotube for each channel, having the same length as the membrane thickness and an external diameter close to the diameter of the membrane holes, was obtained. Yield, selectivity and quality of CNTs in terms of diameter, length and arrangement (i.e. number of tubes for each channel) were optimized by investigating the effect of changing the experimental conditions for the CVD process. We showed that upon thermal treatment RAAO membranes were made up of crystallized allotropic alumina phases, which govern the subsequent CNT growth, because of their catalytic activity, likely due to their Lewis acidity. The strict control of experimental conditions for membrane preparation and CNT growth allowed us to enhance the carbon structural order, which is a critical requisite for CNT application as a substitute for copper in novel nano-interconnects.

  9. Optimizing pentacene thin-film transistor performance: Temperature and surface condition induced layer growth modification.

    Lassnig, R; Hollerer, M; Striedinger, B; Fian, A; Stadlober, B; Winkler, A

    2015-11-01

    In this work we present in situ electrical and surface analytical, as well as ex situ atomic force microscopy (AFM) studies on temperature and surface condition induced pentacene layer growth modifications, leading to the selection of optimized deposition conditions and entailing performance improvements. We prepared p ++ -silicon/silicon dioxide bottom-gate, gold bottom-contact transistor samples and evaluated the pentacene layer growth for three different surface conditions (sputtered, sputtered + carbon and unsputtered + carbon) at sample temperatures during deposition of 200 K, 300 K and 350 K. The AFM investigations focused on the gold contacts, the silicon dioxide channel region and the highly critical transition area. Evaluations of coverage dependent saturation mobilities, threshold voltages and corresponding AFM analysis were able to confirm that the first 3-4 full monolayers contribute to the majority of charge transport within the channel region. At high temperatures and on sputtered surfaces uniform layer formation in the contact-channel transition area is limited by dewetting, leading to the formation of trenches and the partial development of double layer islands within the channel region instead of full wetting layers. By combining the advantages of an initial high temperature deposition (well-ordered islands in the channel) and a subsequent low temperature deposition (continuous film formation for low contact resistance) we were able to prepare very thin (8 ML) pentacene transistors of comparably high mobility.

  10. Optimization and effects of different culture conditions on growth of Halomicronema hongdechloris – a filamentous cyanobacterium containing chlorophyll f

    Yaqiong eLi

    2014-02-01

    Full Text Available A chlorophyll f containing cyanobacterium, Halomicronema hongdechloris (H. hongdechloris was isolated from a stromatolite cyanobacterial community. However, the extremely slower growth rate of H. hongdechloris culture became a critical factor, hindering the research on this newly isolated cyanobacterium and the investigation of chlorophyll f-photosynthesis. Therefore, optimizing H. hongdechloris culture conditions has become an essential requirement for future research. This work investigated the effects of various culture conditions, essential nutrients and light environments to determine the optimal growth conditions for H. hongdechloris and the biosynthetic rate of chlorophyll f. Based on the total chlorophyll concentration, an optimal growth rate of 0.22 ± 0.02 day-1 (doubling time: 3.1 ± 0.3 days was observed when cells were grown under continuous illumination with far-red light with an intensity of 20 µE at 32°C in modified K+ES seawater (pH 8.0 with additional supplements of 11.75 mM NaNO3 and 0.15 mM K2HPO4. High performance liquid chromatography on H. hongdechloris pigments confirmed that chlorophyll a is the major chlorophyll and chlorophyll f constitutes approximately 10% of the total chlorophyll from cells grown under far-red light. Fluorescence confocal image analysis demonstrated changes of photosynthetic membranes and the distribution of photopigments in response to different light conditions. The total photosynthetic oxygen evolution yield per cell showed no changes under different light conditions, which confirms the involvement of chlorophyll f in oxygenic photosynthesis. The implications of the presence of chlorophyll f in H. hongdechloris and its relationship to light environment are discussed.

  11. A novel liquid medium for the efficient growth of the salmonid pathogen Piscirickettsia salmonis and optimization of culture conditions.

    Mirtha Henríquez

    Full Text Available Piscirickettsia salmonis is the bacterium that causes Piscirickettsiosis, a systemic disease of salmonid fish responsible for significant economic losses within the aquaculture industry worldwide. The growth of the bacterium for vaccine formulation has been traditionally accomplished by infecting eukaryotic cell lines, a process that involves high production costs and is time-consuming. Recent research has demonstrated that it is possible to culture pure P. salmonis in a blood containing (cell-free medium. In the present work we demonstrate the growth of P. salmonis in a liquid medium free from blood and serum components, thus establishing a novel and simplified bacteriological medium. Additionally, the new media reported provides improved growth conditions for P. salmonis, where biomass concentrations of approximately 800 mg cell dry weight L(-1 were obtained, about eight times higher than those reported for the blood containing medium. A 2- level full factorial design was employed to evaluate the significance of the main medium components on cell growth and an optimal temperature range of 23-27°C was determined for the microorganism to grow in the novel liquid media. Therefore, these results represent a breakthrough regarding P. salmonis research in order to optimize pure P. salmonis growth in liquid blood and serum free medium.

  12. Identification and Optimal Growth Conditions of Actinomycetes Isolated From Mangrove Environment

    Ameerah Abdul Hamid; Suhaidi Ariffin; Sharifah Aminah Syed Mohamad

    2015-01-01

    Actinomycetes are classified as saprophytes that play a significant role in the breakdown of organic matters into more readily assimilable nutrients. They are also known to produce a variety of secondary metabolites, which are useful for human, veterinary medicine and agriculture applications. The optimum growth conditions of actinomycetes isolated from mangrove environment at different temperature, pH and sodium chloride (NaCl) concentration were studied. The identification of the isolates by both biochemical test and 16S rRNA analysis was also done. All isolates were grown in ISP1 medium at different temperature (25, 30, 37 and 40 degree Celsius); pH (3.5, 5, 7 and 9); and salt concentration (0, 3, 5 and 7 % w/v). The optimum temperature for KMS1 and KMH2 isolates was at 25 degree Celsius. However, the optimum temperature for PCS1 and PMH1A was at 30 and 37 degree Celsius respectively. The optimum pH was pH 7 and the most preferred NaCl concentration of all isolates was at 3 % (w/v). All isolates showed negative result for carbohydrate fermentation except for KMS1 which showed utilisation of D-Fructose sugar with acid production. Only KMS1 and PCS1 exhibited amylolytic and proteolytic activity. The isolates were successfully identified as Streptomyces variables (KMS1), Streptomyces rubrolavendulae (KMH2), Streptomyces spp. CPE333 (PCS1) and Actinomycetales bacterium (PMH1A). (author)

  13. Optimization of experimental conditions for the monitoring of nucleation and growth of racemic Diprophylline from the supercooled melt

    Lemercier, Aurélien; Viel, Quentin; Brandel, Clément; Cartigny, Yohann; Dargent, Eric; Petit, Samuel; Coquerel, Gérard

    2017-08-01

    Since more and more pharmaceutical substances are developed as amorphous forms, it is nowadays of major relevance to get insights into the nucleation and growth mechanisms from supercooled melts (SCM). A step-by-step approach of recrystallization from a SCM is presented here, designed to elucidate the impact of various experimental parameters. Using the bronchodilator agent Diprophylline (DPL) as a model compound, it is shown that optimal conditions for informative observations of the crystallization behaviour from supercooled racemic DPL require to place samples between two cover slides with a maximum sample thickness of 20 μm, and to monitor recrystallization during an annealing step of 30 min at 70 °C, i.e. about 33 °C above the temperature of glass transition. In these optimized conditions, it could be established that DPL crystallization proceeds in two steps: spontaneous nucleation and growth of large and well-faceted particles of a new crystal form (primary crystals: PC) and subsequent crystallization of a previously known form (RII) that develops from specific surfaces of PC. The formation of PC particles therefore constitutes the key-step of the crystallization events and is shown to be favoured by at least 2.33 wt% of the major chemical impurity, Theophylline.

  14. Optimality Conditions in Vector Optimization

    Jiménez, Manuel Arana; Lizana, Antonio Rufián

    2011-01-01

    Vector optimization is continuously needed in several science fields, particularly in economy, business, engineering, physics and mathematics. The evolution of these fields depends, in part, on the improvements in vector optimization in mathematical programming. The aim of this Ebook is to present the latest developments in vector optimization. The contributions have been written by some of the most eminent researchers in this field of mathematical programming. The Ebook is considered essential for researchers and students in this field.

  15. Optimization of conditions for growth of vanadium dioxide thin films on silicon by pulsed-laser deposition

    Shibuya, Keisuke; Sawa, Akihito

    2015-10-01

    We systematically examined the effects of the substrate temperature (TS) and the oxygen pressure (PO2) on the structural and optical properties polycrystalline V O2 films grown directly on Si(100) substrates by pulsed-laser deposition. A rutile-type V O2 phase was formed at a TS ≥ 450 °C at PO2 values ranging from 5 to 20 mTorr, whereas other structures of vanadium oxides were stabilized at lower temperatures or higher oxygen pressures. The surface roughness of the V O2 films significantly increased at growth temperatures of 550 °C or more due to agglomeration of V O2 on the surface of the silicon substrate. An apparent change in the refractive index across the metal-insulator transition (MIT) temperature was observed in V O2 films grown at a TS of 450 °C or more. The difference in the refractive index at a wavelength of 1550 nm above and below the MIT temperature was influenced by both the TS and PO2, and was maximal for a V O2 film grown at 450 °C under 20 mTorr. Based on the results, we derived the PO2 versus 1/TS phase diagram for the films of vanadium oxides, which will provide a guide to optimizing the conditions for growth of V O2 films on silicon platforms.

  16. Optimization of conditions for growth of vanadium dioxide thin films on silicon by pulsed-laser deposition

    Keisuke Shibuya

    2015-10-01

    Full Text Available We systematically examined the effects of the substrate temperature (TS and the oxygen pressure (PO2 on the structural and optical properties polycrystalline V O2 films grown directly on Si(100 substrates by pulsed-laser deposition. A rutile-type V O2 phase was formed at a TS ≥ 450 °C at PO2 values ranging from 5 to 20 mTorr, whereas other structures of vanadium oxides were stabilized at lower temperatures or higher oxygen pressures. The surface roughness of the V O2 films significantly increased at growth temperatures of 550 °C or more due to agglomeration of V O2 on the surface of the silicon substrate. An apparent change in the refractive index across the metal–insulator transition (MIT temperature was observed in V O2 films grown at a TS of 450 °C or more. The difference in the refractive index at a wavelength of 1550 nm above and below the MIT temperature was influenced by both the TS and PO2, and was maximal for a V O2 film grown at 450 °C under 20 mTorr. Based on the results, we derived the PO2 versus 1/TS phase diagram for the films of vanadium oxides, which will provide a guide to optimizing the conditions for growth of V O2 films on silicon platforms.

  17. The Activity of Nodules of the Supernodulating Mutant Mtsunn Is not Limited by Photosynthesis under Optimal Growth Conditions

    Ricardo A. Cabeza

    2014-04-01

    Full Text Available Legumes match the nodule number to the N demand of the plant. When a mutation in the regulatory mechanism deprives the plant of that ability, an excessive number of nodules are formed. These mutants show low productivity in the fields, mainly due to the high carbon burden caused through the necessity to supply numerous nodules. The objective of this study was to clarify whether through optimal conditions for growth and CO2 assimilation a higher nodule activity of a supernodulating mutant of Medicago truncatula (M. truncatula can be induced. Several experimental approaches reveal that under the conditions of our experiments, the nitrogen fixation of the supernodulating mutant, designated as sunn (super numeric nodules, was not limited by photosynthesis. Higher specific nitrogen fixation activity could not be induced through short- or long-term increases in CO2 assimilation around shoots. Furthermore, a whole plant P depletion induced a decline in nitrogen fixation, however this decline did not occur significantly earlier in sunn plants, nor was it more intense compared to the wild-type. However, a distinctly different pattern of nitrogen fixation during the day/night cycles of the experiment indicates that the control of N2 fixing activity of the large number of nodules is an additional problem for the productivity of supernodulating mutants.

  18. The Activity of Nodules of the Supernodulating Mutant Mtsunn Is not Limited by Photosynthesis under Optimal Growth Conditions

    Cabeza, Ricardo A.; Lingner, Annika; Liese, Rebecca; Sulieman, Saad; Senbayram, Mehmet; Tränkner, Merle; Dittert, Klaus; Schulze, Joachim

    2014-01-01

    Legumes match the nodule number to the N demand of the plant. When a mutation in the regulatory mechanism deprives the plant of that ability, an excessive number of nodules are formed. These mutants show low productivity in the fields, mainly due to the high carbon burden caused through the necessity to supply numerous nodules. The objective of this study was to clarify whether through optimal conditions for growth and CO2 assimilation a higher nodule activity of a supernodulating mutant of Medicago truncatula (M. truncatula) can be induced. Several experimental approaches reveal that under the conditions of our experiments, the nitrogen fixation of the supernodulating mutant, designated as sunn (super numeric nodules), was not limited by photosynthesis. Higher specific nitrogen fixation activity could not be induced through short- or long-term increases in CO2 assimilation around shoots. Furthermore, a whole plant P depletion induced a decline in nitrogen fixation, however this decline did not occur significantly earlier in sunn plants, nor was it more intense compared to the wild-type. However, a distinctly different pattern of nitrogen fixation during the day/night cycles of the experiment indicates that the control of N2 fixing activity of the large number of nodules is an additional problem for the productivity of supernodulating mutants. PMID:24727372

  19. Enhancing proliferation and optimizing the culture condition for human bone marrow stromal cells using hypoxia and fibroblast growth factor-2

    Jung-Seok Lee

    2018-04-01

    Full Text Available This study aimed to determine the cellular characteristics and behaviors of human bone marrow stromal cells (hBMSCs expanded in media in a hypoxic or normoxic condition and with or without fibroblast growth factor-2 (FGF-2 treatment. hBMSCs isolated from the vertebral body and expanded in these four groups were evaluated for cellular proliferation/migration, colony-forming units, cell-surface characterization, in vitro differentiation, in vivo transplantation, and gene expression. Culturing hBMSCs using a particular environmental factor (hypoxia and with the addition of FGF-2 increased the cellular proliferation rate while enhancing the regenerative potential, modulated the multipotency-related processes (enhanced chondrogenesis-related processes/osteogenesis, but reduced adipogenesis, and increased cellular migration and collagen formation. The gene expression levels in the experimental samples showed activation of the hypoxia-inducible factor-1 pathway and glycolysis in the hypoxic condition, with this not being affected by the addition of FGF-2. The concurrent application of hypoxia and FGF-2 could provide a favorable condition for culturing hBMSCs to be used in clinical applications associated with bone tissue engineering, due to the enhancement of cellular proliferation and regenerative potential. Keywords: Bone marrow stromal cells, Hypoxia, Fibroblast growth factor, Tissue regeneration, Microenvironment interactions

  20. Optimization of the growth conditions for amylase production by bacillus licheniformis 208 isolated from local hotsprings of karachi

    Asad, W.; Saleem, F.; Ajaz, M.; Rasool, S.A.

    2014-01-01

    Studies on the optimum conditions for the production of extracellular amylase were carried out with a newly isolated strain of Bacillus 208 from the hotsprings in Karachi. The optimum temperature, initial medium pH and incubation period for amylase production were 50 degree C, 7.0 and 24 hrs respectively. Furthermore, cells when grown in the complex media showed high amylase production compared to the minimal medium. Effect of different carbon sources revealed that soluble starch (1%) increased the amylase yield significantly. Peptone (as nitrogen source) gave higher yield as compared to other nitrogen sources tested. Under optimized conditions, the organism entered the stationary phase after 12 hrs and amylase production was observed to be maximum at 24th hrs of cultivation. Enzyme production regulation is influenced by catabolite repression. Reduction in enzyme production was observed in the presence of EDTA while addition of tween 20 and CaCl/sub 2/ helped to enhance the enzyme production. (author)

  1. Baseline growth and reproductive parameters in Lymnaea stagnalis for OECD test guideline development: optimization of diets and culturing conditions

    Holbech, Henrik; Hutchinson, Tom

    laboratories in Denmark, Germany and the UK for the OECD pre-validation work to date. Laboratory cultures of L. stagnalis are traditionally fed fresh (preferably organic) lettuce; however, interrupted supplies of fresh lettuce in some countries in 2011 highlighted a potential problem for the draft OECD test...... of a mollusc reproduction test guideline. An ad hoc mollusc expert group has been formed in Europe to validate methods that can meet this need. Currently, a key species for use in this context is the freshwater gastropod Lymnaea stagnalis. An important aspect of this work is to first develop a specific...... pathogen free defined strain of L. stagnalis and second to establish a historical database of growth and reproductive rates under defined culturing conditions. A mass culture of the RENILYS® strain of L. stagnalis have been established at INRA (France) since 2002 and has been distributed to research...

  2. Optimization of cultural conditions for growth associated chromate reduction by Arthrobacter sp. SUK 1201 isolated from chromite mine overburden

    Dey, Satarupa, E-mail: dey1919@gmail.com [Microbiology Laboratory, Department of Botany, University of Calcutta, Kolkata 700019 (India); Paul, A.K., E-mail: amalk_paul@yahoo.co.in [Microbiology Laboratory, Department of Botany, University of Calcutta, Kolkata 700019 (India)

    2012-04-30

    Highlights: Black-Right-Pointing-Pointer Isolation of a potent Cr(VI) resistant and reducing Arthrobacter SUK 1201 from chromite mine overburdens of Orissa, India. Black-Right-Pointing-Pointer Phylogenetically (16S rDNA analysis), Arthrobacter SUK 1201 showed 99% nucleotide base pair similarity with Arthrobacter GZK-1. Black-Right-Pointing-Pointer Production of insoluble chromium precipitates during chromate reduction under batch culture by the isolate SUK 1201. Black-Right-Pointing-Pointer Confirmation of formation of insoluble chromium precipitate during reduction studies by EDX analysis. Black-Right-Pointing-Pointer Optimization of cultural conditions for Cr(VI) reduction under batch culture leading to complete reduction of 2 mM of Cr(VI). - Abstract: Arthrobacter sp. SUK 1201, a chromium resistant and reducing bacterium having 99% sequence homology of 16S rDNA with Arthrobacter sp. GZK-1 was isolated from chromite mine overburden dumps of Orissa, India. The objective of the present study was to optimize the cultural conditions for chromate reduction by Arthrobacter sp. SUK 1201. The strain showed 67% reduction of 2 mM chromate in 7 days and was associated with the formation of green insoluble precipitate, which showed characteristic peak of chromium in to energy dispersive X-ray analysis. However, Fourier transform infrared spectra have failed to detect any complexation of end products of Cr(VI) reduction with the cell mass. Reduction of chromate increased with increased cell density and was maximum at 10{sup 10} cells/ml, but the reduction potential decreased with increase in Cr(VI) concentration. Chromate reducing efficiency was promoted when glycerol and glucose was used as electron donors. Optimum pH and temperature of Cr(VI) reduction was 7.0 and 35 Degree-Sign C respectively. The reduction process was inhibited by several metal ions and metabolic inhibitors but not by Cu(II) and DNP. These findings suggest that Arthrobacter sp. SUK 1201 has great promise

  3. m-AAA Complexes Are Not Crucial for the Survival of Arabidopsis Under Optimal Growth Conditions Despite Their Importance for Mitochondrial Translation.

    Kolodziejczak, Marta; Skibior-Blaszczyk, Renata; Janska, Hanna

    2018-05-01

    For optimal mitochondrial activity, the mitochondrial proteome must be properly maintained or altered in response to developmental and environmental stimuli. Based on studies of yeast and humans, one of the key players in this control are m-AAA proteases, mitochondrial inner membrane-bound ATP-dependent metalloenzymes. This study focuses on the importance of m-AAA proteases in plant mitochondria, providing their first experimentally proven physiological substrate. We found that the Arabidopsis m- AAA complexes composed of AtFTSH3 and/or AtFTSH10 are involved in the proteolytic maturation of ribosomal subunit L32. Consequently, in the double Arabidopsis ftsh3/10 mutant, mitoribosome biogenesis, mitochondrial translation and functionality of OXPHOS (oxidative phosphorylation) complexes are impaired. However, in contrast to their mammalian or yeast counterparts, plant m-AAA complexes are not critical for the survival of Arabidopsis under optimal conditions; ftsh3/10 plants are only slightly smaller in size at the early developmental stage compared with plants containing m-AAA complexes. Our data suggest that a lack of significant visible morphological alterations under optimal growth conditions involves mechanisms which rely on existing functional redundancy and induced functional compensation in Arabidopsis mitochondria.

  4. Optimal growth condition of earthworms and their vermicompost features during recycling of five different fresh fruit and vegetable wastes.

    Huang, Kui; Xia, Hui; Li, Fusheng; Wei, Yongfen; Cui, Guangyu; Fu, Xiaoyong; Chen, Xuemin

    2016-07-01

    This study aimed to promote vermicomposting performance for recycling fresh fruit and vegetable wastes (FVWs) and to assess microbial population and community of final products. Five fresh FVWs including banana peels, cabbage, lettuce, potato, and watermelon peels were chosen as earthworms' food. The fate test of earthworms showed that 30 g fresh FVWs/day was the optimal loading and the banana peels was harmful for the survival of Eisenia fetida. The followed vermicomposting test revealed lower contents of total carbon and weaker microbial activity in final vermicomposts, relative to those in compared systems without earthworms worked. The leachate from FVWs carried away great amounts of nutrients from reactors. Additionally, different fresh FVWs displayed dissimilar stabilization process. Molecular biological approaches revealed that earthworms could broaden bacterial diversity in their products, with significant greater populations of actinobacteria and ammonia oxidizing bacteria than in control. This study evidences that vermicomposting efficiency differs with the types and loadings of fresh FVWs and vermicomposts are rich in agricultural probiotics.

  5. AMT1;1 transgenic rice plants with enhanced NH4(+) permeability show superior growth and higher yield under optimal and suboptimal NH4(+) conditions.

    Ranathunge, Kosala; El-Kereamy, Ashraf; Gidda, Satinder; Bi, Yong-Mei; Rothstein, Steven J

    2014-03-01

    The major source of nitrogen for rice (Oryza sativa L.) is ammonium (NH4(+)). The NH4(+) uptake of roots is mainly governed by membrane transporters, with OsAMT1;1 being a prominent member of the OsAMT1 gene family that is known to be involved in NH4(+) transport in rice plants. However, little is known about its involvement in NH4(+) uptake in rice roots and subsequent effects on NH4(+) assimilation. This study shows that OsAMT1;1 is a constitutively expressed, nitrogen-responsive gene, and its protein product is localized in the plasma membrane. Its expression level is under the control of circadian rhythm. Transgenic rice lines (L-2 and L-3) overexpressing the OsAMT1;1 gene had the same root structure as the wild type (WT). However, they had 2-fold greater NH4(+) permeability than the WT, whereas OsAMT1;1 gene expression was 20-fold higher than in the WT. Analogous to the expression, transgenic lines had a higher NH4(+) content in the shoots and roots than the WT. Direct NH4(+) fluxes in the xylem showed that the transgenic lines had significantly greater uptake rates than the WT. Higher NH4(+) contents also promoted higher expression levels of genes in the nitrogen assimilation pathway, resulting in greater nitrogen assimilates, chlorophyll, starch, sugars, and grain yield in transgenic lines than in the WT under suboptimal and optimal nitrogen conditions. OsAMT1;1 also enhanced overall plant growth, especially under suboptimal NH4(+) levels. These results suggest that OsAMT1;1 has the potential for improving nitrogen use efficiency, plant growth, and grain yield under both suboptimal and optimal nitrogen fertilizer conditions.

  6. AMT1;1 transgenic rice plants with enhanced NH4 + permeability show superior growth and higher yield under optimal and suboptimal NH4 + conditions

    Rothstein, Steven J.

    2014-01-01

    The major source of nitrogen for rice (Oryza sativa L.) is ammonium (NH4 +). The NH4 + uptake of roots is mainly governed by membrane transporters, with OsAMT1;1 being a prominent member of the OsAMT1 gene family that is known to be involved in NH4 + transport in rice plants. However, little is known about its involvement in NH4 + uptake in rice roots and subsequent effects on NH4 + assimilation. This study shows that OsAMT1;1 is a constitutively expressed, nitrogen-responsive gene, and its protein product is localized in the plasma membrane. Its expression level is under the control of circadian rhythm. Transgenic rice lines (L-2 and L-3) overexpressing the OsAMT1;1 gene had the same root structure as the wild type (WT). However, they had 2-fold greater NH4 + permeability than the WT, whereas OsAMT1;1 gene expression was 20-fold higher than in the WT. Analogous to the expression, transgenic lines had a higher NH4 + content in the shoots and roots than the WT. Direct NH4 + fluxes in the xylem showed that the transgenic lines had significantly greater uptake rates than the WT. Higher NH4 + contents also promoted higher expression levels of genes in the nitrogen assimilation pathway, resulting in greater nitrogen assimilates, chlorophyll, starch, sugars, and grain yield in transgenic lines than in the WT under suboptimal and optimal nitrogen conditions. OsAMT1;1 also enhanced overall plant growth, especially under suboptimal NH4 + levels. These results suggest that OsAMT1;1 has the potential for improving nitrogen use efficiency, plant growth, and grain yield under both suboptimal and optimal nitrogen fertilizer conditions. PMID:24420570

  7. Optimization of Nd1+xBa2-xCu3O7 thin-film growth conditions using micro-Raman spectroscopy

    Bae, J S; Yang, In-Sang; Jo, W; Wee, S H; Yoo, S I

    2006-01-01

    We explore optimal growth conditions for superconducting Nd 1+x Ba 2-x Cu 3 O 7 (NdBCO) thin films deposited under various oxygen pressures in the range of 100-800 mTorr. In this study we address spatial inhomogeneity, growth orientation, impurity phases, cation disorder, and oxygen deficiency of NdBCO thin films by using micro-Raman scattering. The films grown in the low oxygen pressure range of 100-200 mTorr show predominantly a-axis orientation and degraded superconducting properties with a critical temperature (T c ) of ∼80 K. The degradation of the transition temperature of the films deposited at lower oxygen pressure is attributed to the cation disorder, on the basis of analysis of the apical oxygen Raman mode. On the other hand, the samples grown in the higher oxygen pressure range of 400-800 mTorr show strong c-axis orientation and much less cation disorder. These features correlate with their high values of T c and J c

  8. All three quinone species play distinct roles in ensuring optimal growth under aerobic and fermentative conditions in E. coli K12

    Nitzschke, Annika

    2018-01-01

    The electron transport chain of E. coli contains three different quinone species, ubiquinone (UQ), menaquinone (MK) and demethylmenaquinone (DMK). The content and ratio of the different quinone species vary depending on the external conditions. To study the function of the different quinone species in more detail, strains with deletions preventing UQ synthesis, as well as MK and/or DMK synthesis were cultured under aerobic and anaerobic conditions. The strains were characterized with respect to growth and product synthesis. As quinones are also involved in the control of ArcB/A activity, we analyzed the phosphorylation state of the response regulator as well as the expression of selected genes.The data show reduced aerobic growth coupled to lactate production in the mutants defective in ubiquinone synthesis. This confirms the current assumption that ubiquinone is the main quinone under aerobic growth conditions. In the UQ mutant strains the amount of MK and DMK is significantly elevated. The strain synthesizing only DMK is less affected in growth than the strain synthesizing MK as well as DMK. An inhibitory effect of MK on aerobic growth due to increased oxidative stress is postulated.Under fermentative growth conditions the mutant synthesizing only UQ is severely impaired in growth. Obviously, UQ is not able to replace MK and DMK during anaerobic growth. Mutations affecting quinone synthesis have an impact on ArcA phosphorylation only under anaerobic conditions. ArcA phosphorylation is reduced in strains synthesizing only MK or MK plus DMK. PMID:29614086

  9. Simulated annealing algorithm for optimal capital growth

    Luo, Yong; Zhu, Bo; Tang, Yong

    2014-08-01

    We investigate the problem of dynamic optimal capital growth of a portfolio. A general framework that one strives to maximize the expected logarithm utility of long term growth rate was developed. Exact optimization algorithms run into difficulties in this framework and this motivates the investigation of applying simulated annealing optimized algorithm to optimize the capital growth of a given portfolio. Empirical results with real financial data indicate that the approach is inspiring for capital growth portfolio.

  10. Microfibrous Matrices: Optimization of Synthesis Conditions

    Amogh N. Karwa

    2012-01-01

    Full Text Available This study focuses on the process of optimization for carbon nanofiber synthesis at the exterior and the interior of 3-dimensional sintered nickel microfibrous networks. Synthesis of carbon nanofibers (CNF by catalytic decomposition of acetylene (ethyne was conducted at atmospheric pressure and short reaction times (10 min. Two factors evaluated during the study were (a CNF quality (observed by SEM and Raman spectroscopy and (b rate of reaction (gravimetrically measured carbon yield. Independent optimization variables included redox faceting pretreatment of nickel, synthesis temperature, and gas composition. Faceting resulted in an 8-fold increase in the carbon yield compared to an untreated substrate. Synthesis with varying levels of hydrogen maximized the carbon yield (9.31 mg C/cm2 catalyst. The quality of CNF was enhanced via a reduction in amorphous carbon that resulted from the addition of 20% ammonia. Optimized growth conditions that led to high rates of CNF deposition preferentially deposited this carbon at the exterior layer of the nickel microfibrous networks (570°C, 78% H2, 20% NH3, 2% C2H2, faceted Ni.. CNF growth within the 3-dimensional nickel networks was accomplished at the conditions selected to lower the gravimetric reaction rate (470°C, 10% H2, 88% N2, 2% C2H2, nonfaceted Ni.

  11. Conditioning biomass for microbial growth

    Bodie, Elizabeth A; England, George

    2015-03-31

    The present invention relates to methods for improving the yield of microbial processes that use lignocellulose biomass as a nutrient source. The methods comprise conditioning a composition comprising lignocellulose biomass with an enzyme composition that comprises a phenol oxidizing enzyme. The conditioned composition can support a higher rate of growth of microorganisms in a process. In one embodiment, a laccase composition is used to condition lignocellulose biomass derived from non-woody plants, such as corn and sugar cane. The invention also encompasses methods for culturing microorganisms that are sensitive to inhibitory compounds in lignocellulose biomass. The invention further provides methods of making a product by culturing the production microorganisms in conditioned lignocellulose biomass.

  12. Artificial neural network-based model for the prediction of optimal growth and culture conditions for maximum biomass accumulation in multiple shoot cultures of Centella asiatica.

    Prasad, Archana; Prakash, Om; Mehrotra, Shakti; Khan, Feroz; Mathur, Ajay Kumar; Mathur, Archana

    2017-01-01

    An artificial neural network (ANN)-based modelling approach is used to determine the synergistic effect of five major components of growth medium (Mg, Cu, Zn, nitrate and sucrose) on improved in vitro biomass yield in multiple shoot cultures of Centella asiatica. The back propagation neural network (BPNN) was employed to predict optimal biomass accumulation in terms of growth index over a defined culture duration of 35 days. The four variable concentrations of five media components, i.e. MgSO 4 (0, 0.75, 1.5, 3.0 mM), ZnSO 4 (0, 15, 30, 60 μM), CuSO 4 (0, 0.05, 0.1, 0.2 μM), NO 3 (20, 30, 40, 60 mM) and sucrose (1, 3, 5, 7 %, w/v) were taken as inputs for the ANN model. The designed model was evaluated by performing three different sets of validation experiments that indicated a greater similarity between the target and predicted dataset. The results of the modelling experiment suggested that 1.5 mM Mg, 30 μM Zn, 0.1 μM Cu, 40 mM NO 3 and 6 % (w/v) sucrose were the respective optimal concentrations of the tested medium components for achieving maximum growth index of 1654.46 with high centelloside yield (62.37 mg DW/culture) in the cultured multiple shoots. This study can facilitate the generation of higher biomass of uniform, clean, good quality C. asiatica herb that can efficiently be utilized by pharmaceutical industries.

  13. Optimal Product Variety, Scale Effects and Growth

    de Groot, H.L.F.; Nahuis, R.

    1997-01-01

    We analyze the social optimality of growth and product variety in a model of endogenous growth. The model contains two sectors, one assembly sector producing a homogenous consumption good, and one intermediate goods sector producing a differentiated input used in the assembly sector. Growth results

  14. PRODUCTION AND OPTIMIZATION OF GROWTH CONDITIONS FOR INVERTASE ENZYME BY ASPERGILLUS SP., IN SOLID STATE FERMENTATION (SSF USING PAPAYA PEEL AS SUBSTRATE

    Brindha Chelliappan

    2013-12-01

    Full Text Available Invertase enzymes are produced mainly by plants, some filamentous fungi, yeast and many other microorganisms which finds applications in food industries, confectionaries, pharmaceuticals, etc., The present work deals with the production of Invertase by Aspergillus sp., isolated from various soil samples in solid state fermentation using papaya peel waste as substrate. Enzyme activity was checked using Fehling’s reagent and assay was carried out by DNSA method. The results of optimized conditions showed that the invertase activity was high in the SSF using papaya peel as substrate, incubated for 6 days at temperature of 35°C, pH 7, with 2.25gms/100ml of Ammonium nitrate as nitrogen source and 10gms/100ml of sucrose as carbon source. Hence the agro wastes from industries can be recycled by using it as substrate in SSF for high invertase enzyme production which finds applications in many fields.

  15. Directional Convexity and Finite Optimality Conditions.

    1984-03-01

    system, Necessary Conditions for optimality. Work Unit Number 5 (Optimization and Large Scale Systems) *Istituto di Matematica Applicata, Universita...that R(T) is convex would then imply x(u,T) e int R(T). Cletituto di Matematica Applicata, Universita di Padova, 35100 ITALY. Sponsored by the United

  16. On filter boundary conditions in topology optimization

    Clausen, Anders; Andreassen, Erik

    2017-01-01

    Most research papers on topology optimization involve filters for regularization. Typically, boundary effects from the filters are ignored. Despite significant drawbacks the inappropriate homogeneous Neumann boundary conditions are used, probably because they are trivial to implement. In this paper...

  17. Design and optimization of food processing conditions

    Silva, C. L. M.

    1996-01-01

    The main research objectives of the group are the design and optimization of food processing conditions. Most of the work already developed is on the use of mathematical modeling of transport phenomena and quantification of degradation kinetics as two tools to optimize the final quality of thermally processed food products. Recently, we initiated a project with the main goal of studying the effects of freezing and frozen storage on orange and melon juice pectinesterase activity and q...

  18. Optimizing growth and conidia production of Cercospora medicaginis

    Naceur DJEBALI

    2010-09-01

    Full Text Available The fungus Cercospora medicaginis is pathogenic to annual and perennial Medicago species. It grows slowly and produces only few conidia. To test the pathogenicity or virulence of C. medicaginis and to breed resistant lines of Medicago truncatula we optimized in vitro the growth and the conidium production of four isolates of C. medicaginis derived from M. truncatula and M. polymorpha. Of the eight media tested, that with wheat bran juice (WBJ yielded optimal growth and conidium production with most strains. The optimum growth temperature on WBJ medium was 25–30°C. Growth and conidia production were better in conditions of alternating light and darkness than with constant darkness. The best growth in the liquid WBJ medium occurred at pH 6–7, but the greatest number of conidia in that medium was obtained at pH 8–9.

  19. Optimal Growth in Hypersonic Boundary Layers

    Paredes, Pedro; Choudhari, Meelan M.; Li, Fei; Chang, Chau-Lyan

    2016-01-01

    The linear form of the parabolized linear stability equations is used in a variational approach to extend the previous body of results for the optimal, nonmodal disturbance growth in boundary-layer flows. This paper investigates the optimal growth characteristics in the hypersonic Mach number regime without any high-enthalpy effects. The influence of wall cooling is studied, with particular emphasis on the role of the initial disturbance location and the value of the spanwise wave number that leads to the maximum energy growth up to a specified location. Unlike previous predictions that used a basic state obtained from a self-similar solution to the boundary-layer equations, mean flow solutions based on the full Navier-Stokes equations are used in select cases to help account for the viscous- inviscid interaction near the leading edge of the plate and for the weak shock wave emanating from that region. Using the full Navier-Stokes mean flow is shown to result in further reduction with Mach number in the magnitude of optimal growth relative to the predictions based on the self-similar approximation to the base flow.

  20. Optimization of lamp spectrum for vegetable growth

    Prikupets, L.B.; Tikhomirov, A.A. [Institute of Biophysics, Krasnoyarsk (Russian Federation)

    1994-12-31

    Commmercial light sources were evaluated as to the optimum conditions for the production of tomatoes and cucumbers. Data is presented which corresponds to the maximum productivity and optimal spectral ratios. It is suggested that the commercial light sources evaluated were not efficient for the growing of the vegetables.

  1. Optimizing conditions for an accelerated leach test

    Pietrzak, R.F.; Fuhrmann, M.; Heiser, J.; Franz, E.M.; Colombo, P.

    1988-01-01

    An accelerated leach test for low-level radioactive waste forms is being developed to provide, in a short time, data that can be extrapolated to long time periods. The approach is to provide experimental conditions that will accelerate leaching without changing the dominant release mechanism. Experimental efforts have focused on combining individual factors that have been observed to accelerate leaching. These include elevated temperature, increased leachant volume, and reduced specimen size. The response of diffusion coefficients to various acceleration factors have been evaluated and provide information on experimental parameters that need to be optimized to increase leach rates. Preliminary modeling using a diffusion mechanism (allowing for depletion) of a finite cylinder geometry indicates that during early portions of experiments (daily sampling intervals), leaching is diffusion controlled and more rapid than later in the same experiments (weekly or greater sampling intervals). For cement waste forms, this reduction in rate may be partially controlled by changes in physical structure and chemistry (sometimes related to environmental influences such as CO 2 ), but it is more likely associated with the duration of the sampling interval. By using a combination of mathematical modeling and by experimentally investigating various leach rate controlling factors, a more complete understanding of leaching processes is being developed. This, in turn, is leading to optimized accelerating conditions for a leach test

  2. Root Growth Optimizer with Self-Similar Propagation

    Xiaoxian He

    2015-01-01

    Full Text Available Most nature-inspired algorithms simulate intelligent behaviors of animals and insects that can move spontaneously and independently. The survival wisdom of plants, as another species of biology, has been neglected to some extent even though they have evolved for a longer period of time. This paper presents a new plant-inspired algorithm which is called root growth optimizer (RGO. RGO simulates the iterative growth behaviors of plant roots to optimize continuous space search. In growing process, main roots and lateral roots, classified by fitness values, implement different strategies. Main roots carry out exploitation tasks by self-similar propagation in relatively nutrient-rich areas, while lateral roots explore other places to seek for better chance. Inhibition mechanism of plant hormones is applied to main roots in case of explosive propagation in some local optimal areas. Once resources in a location are exhausted, roots would shrink away from infertile conditions to preserve their activity. In order to validate optimization effect of the algorithm, twelve benchmark functions, including eight classic functions and four CEC2005 test functions, are tested in the experiments. We compared RGO with other existing evolutionary algorithms including artificial bee colony, particle swarm optimizer, and differential evolution algorithm. The experimental results show that RGO outperforms other algorithms on most benchmark functions.

  3. Sufficient conditions for Lagrange, Mayer, and Bolza optimization problems

    Boltyanski V.

    2001-01-01

    Full Text Available The Maximum Principle [2,13] is a well known necessary condition for optimality. This condition, generally, is not sufficient. In [3], the author proved that if there exists regular synthesis of trajectories, the Maximum Principle also is a sufficient condition for time-optimality. In this article, we generalize this result for Lagrange, Mayer, and Bolza optimization problems.

  4. Optimizing conditions for an accelerated leach test

    Pietrzak, R.F.; Fuhrmann, M.; Heiser, J.; Franz, E.M.; Colombo, P.

    1988-01-01

    An accelerated leach test for low-level radioactive waste forms is being developed to provide, in a short time, data that can be extrapolated to long time periods. The approach is to provide experimental conditions that will accelerate leaching without changing the dominant release mechanism. Experimental efforts have focused on combining individual factors that have been observed to accelerate leaching. These include elevated temperature, increased leachant volume, and reduced specimen size. The response of diffusion coefficients to various acceleration factors have been evaluated and provide information on experimental parameters that need to be optimized to increase leach rates. For example, these data show that large volumes of leachant are required when leaching portland cement waste forms at elevated temperatures because of high concentrations of dissolved species. Sr-85 leaching is particularly susceptible to suppression due to concentration effects while Cs-137 leaching is less so. Preliminary modeling using a diffusion mechanism (allowing for depletion) of a finite cylinder geometry indicates that during early portions of experiments (daily sampling intervals), leaching is diffusion controlled and more rapid than later in the same experiments (weekly or greater sampling intervals). For cement waste forms, this reduction in rate may be partially controlled by changes in physical structure and chemistry (sometimes related to environmental influences such as CO 2 ), but it is more likely associated with the duration of the sampling interval. 9 refs., 6 figs

  5. Bacterial Quorum Sensing Stabilizes Cooperation by Optimizing Growth Strategies.

    Bruger, Eric L; Waters, Christopher M

    2016-11-15

    Communication has been suggested as a mechanism to stabilize cooperation. In bacteria, chemical communication, termed quorum sensing (QS), has been hypothesized to fill this role, and extracellular public goods are often induced by QS at high cell densities. Here we show, with the bacterium Vibrio harveyi, that QS provides strong resistance against invasion of a QS defector strain by maximizing the cellular growth rate at low cell densities while achieving maximum productivity through protease upregulation at high cell densities. In contrast, QS mutants that act as defectors or unconditional cooperators maximize either the growth rate or the growth yield, respectively, and thus are less fit than the wild-type QS strain. Our findings provide experimental evidence that regulation mediated by microbial communication can optimize growth strategies and stabilize cooperative phenotypes by preventing defector invasion, even under well-mixed conditions. This effect is due to a combination of responsiveness to environmental conditions provided by QS, lowering of competitive costs when QS is not induced, and pleiotropic constraints imposed on defectors that do not perform QS. Cooperation is a fundamental problem for evolutionary biology to explain. Conditional participation through phenotypic plasticity driven by communication is a potential solution to this dilemma. Thus, among bacteria, QS has been proposed to be a proximate stabilizing mechanism for cooperative behaviors. Here, we empirically demonstrate that QS in V. harveyi prevents cheating and subsequent invasion by nonproducing defectors by maximizing the growth rate at low cell densities and the growth yield at high cell densities, whereas an unconditional cooperator is rapidly driven to extinction by defectors. Our findings provide experimental evidence that QS regulation prevents the invasion of cooperative populations by QS defectors even under unstructured conditions, and they strongly support the role of

  6. Changes In Growth Culture FDA Activity Under Changing Growth Conditions

    Jørgensen, Per Elberg; Eriksen, Thomas Juul; Jensen, Bjørn K.

    1992-01-01

    The FDA hydrolysis capacities and bacterial biomass concentrations (estimated by determination of ATP content) of growth cultures prepared from activated sludge and wastewater, were measured to find out whether the FDA activity would reflect bacterial biomass under different physiological states...... of the bacteria. The FDA activity/ATP ratio was calculated for different concentrations of autoclaved sludge. A faster decay rate of ATP relative to FDA hydrolysis activity was observed, thus causing changes in the ratio. Furthermore, comparison between values obtained from pure cultures and different soils...... revealed differences up to two orders of magnitude of the ratio. Based on these results it was concluded that the FDA activity should not be applied for measurements of viable biomass in environments in which different physiological conditions occur....

  7. Closedness type regularity conditions in convex optimization and beyond

    Sorin-Mihai Grad

    2016-09-01

    Full Text Available The closedness type regularity conditions have proven during the last decade to be viable alternatives to their more restrictive interiority type counterparts, in both convex optimization and different areas where it was successfully applied. In this review article we de- and reconstruct some closedness type regularity conditions formulated by means of epigraphs and subdifferentials, respectively, for general optimization problems in order to stress that they arise naturally when dealing with such problems. The results are then specialized for constrained and unconstrained convex optimization problems. We also hint towards other classes of optimization problems where closedness type regularity conditions were successfully employed and discuss other possible applications of them.

  8. Optimization of fermentation conditions for red pigment production ...

    An extracellular pigment-producing ascomycetous filamentous fungi belonging to the genera Penicillium was obtained from soil and its optimal culture conditions investigated. The optimal culture conditions for pigment production were as follows; soluble starch 2% (670 units), peptone (880 units), pH 9.0 (900 units); ...

  9. Ancestral sequence alignment under optimal conditions

    Brown Daniel G

    2005-11-01

    Full Text Available Abstract Background Multiple genome alignment is an important problem in bioinformatics. An important subproblem used by many multiple alignment approaches is that of aligning two multiple alignments. Many popular alignment algorithms for DNA use the sum-of-pairs heuristic, where the score of a multiple alignment is the sum of its induced pairwise alignment scores. However, the biological meaning of the sum-of-pairs of pairs heuristic is not obvious. Additionally, many algorithms based on the sum-of-pairs heuristic are complicated and slow, compared to pairwise alignment algorithms. An alternative approach to aligning alignments is to first infer ancestral sequences for each alignment, and then align the two ancestral sequences. In addition to being fast, this method has a clear biological basis that takes into account the evolution implied by an underlying phylogenetic tree. In this study we explore the accuracy of aligning alignments by ancestral sequence alignment. We examine the use of both maximum likelihood and parsimony to infer ancestral sequences. Additionally, we investigate the effect on accuracy of allowing ambiguity in our ancestral sequences. Results We use synthetic sequence data that we generate by simulating evolution on a phylogenetic tree. We use two different types of phylogenetic trees: trees with a period of rapid growth followed by a period of slow growth, and trees with a period of slow growth followed by a period of rapid growth. We examine the alignment accuracy of four ancestral sequence reconstruction and alignment methods: parsimony, maximum likelihood, ambiguous parsimony, and ambiguous maximum likelihood. Additionally, we compare against the alignment accuracy of two sum-of-pairs algorithms: ClustalW and the heuristic of Ma, Zhang, and Wang. Conclusion We find that allowing ambiguity in ancestral sequences does not lead to better multiple alignments. Regardless of whether we use parsimony or maximum likelihood, the

  10. Growth conditions of 0-group plaice

    Cardoso, J.F.M.F.; Freitas, V.; de Paoli, H.; Witte, J.IJ.; van der Veer, H.W.

    2016-01-01

    Growth studies based on population-based growth estimates are limited by the fact that they do not take into account differences in age/size structure within the population. To overcome these problems, otolith microstructure analysis is often used to estimate individual growth. Here, we analyse

  11. Achieving Revenue Benchmarks Conditional on Growth Properties

    Dong Hyun Son

    2017-05-01

    Full Text Available This study examines whether certain firm characteristics, specifically growth properties, are associated with the likelihood of achieving market expectations for revenues, as well as which mechanism (revenue manipulation or expectation management growth firms utilize in order to avoid missing these expectations. The results show that growth firms are more likely to meet or exceed analyst revenue forecasts than non-growth firms. We also find that growth firms are more inclined to manipulate their reported revenues upwards, and less inclined to guide market expectations for revenues downward, in order to meet or beat expected revenues relative to non-growth firms. These findings suggest that window-dressing activities by growth firms may not be sustainable in the long-run and can misguide users of financial statements in their decision-making.

  12. Optimization of instrumental activation analysis conditions

    Guinn, V.; Gavrilas-Guinn, M.

    1993-01-01

    In instrumental neutron activation analysis (INAA) work, a good commonsense rule of thumb is that the opium conditions for the measurement of any induced activity, in a multi-element sample matrix, are an irradiation time, a decay time, and a counting time each approximately equal to the half-life of the radionuclide (if feasible). The INAA Advance Computer Program (APCP) was used to test this rule on ten reference materials. For the 280 radionuclide/material combinations traced through all 14 APCP condition sets, the rule predicted the best set for 67% of them, was off by one set for 31% of them, and was only off by two sets of 2% of them. (author) 6 refs.; 1 fig.; 3 tabs

  13. Optimizing BTEX biodegradation under denitrifying conditions

    Hutchins, S.R.

    1991-01-01

    Leaking underground storage tanks are a major source of ground water contamination by petroleum hydrocarbons. Gasoline and other fuels contain benzene, toluene, ethylbenzene, and xylenes (collectively known as BTEX), which are hazardous compounds, regulated by the U.S. Environmental Protection Agency (EPA). Laboratory tests were conducted to determine optimum conditions for benzene, toluene, ethylbenzene, and xylene (collectively known as BTEX) biodegradation by aquifer microorganisms under denitrifying conditions. Microcosms, constructed with aquifer samples from Traverse City, Michigan, were amended with selected concentrations of nutrients and one or more hydrocarbons. Toluene, ethylbenzene, m-xylene, and p-xylene, were degraded to below 5 micrograms/L when present as sole source substrates; stoichiometric calculations indicated that nitrate removal was sufficient to account for 70 to 80% of the compounds being mineralized. o-Xylene was recalcitrant when present as a sole source substrate, but was slowly degraded in the presence of the other hydrocarbons. Benzene was not degraded within one year, regardless of whether it was available as a sole source substrate or in combination with toluene, phenol, or catechol. Pre-exposure to low levels of BTEX and nutrients had variable effects, as did the addition of different concentrations of ammonia and phosphate. Nitrate concentrations as high as 500 mg/L NO3-N were slightly inhibitory. These data indicate that nitrate-mediated biodegradation of BTEX at Traverse City can occur under a variety of environmental conditions with rates relatively independent of nutrient concentrations. However, the data reaffirm that benzene is recalcitrant under strictly anaerobic conditions in these samples

  14. Numerical optimization of composite hip endoprostheses under different loading conditions

    Blake, T. A.; Davy, D. T.; Saravanos, D. A.; Hopkins, D. A.

    1992-01-01

    The optimization of composite hip implants was investigated. Emphasis was placed on the effect of shape and material tailoring of the implant to improve the implant-bone interaction. A variety of loading conditions were investigated to better understand the relationship between loading and optimization outcome. Comparisons of the initial and optimal models with more complex 3D finite element models were performed. The results indicate that design improvements made using this method result in similar improvements in the 3D models. Although the optimization outcomes were significantly affected by the choice of loading conditions, certain trends were observed that were independent of the applied loading.

  15. Growth of Corophium volutator under laboratory conditions

    Kater, B.J.; Jol, J.G.; Smit, M.G.D.

    2008-01-01

    Temperature-dependent growth is an important factor in the population model of Corophium volutator that was developed to translate responses in a 10-day acute bioassay to ecological consequences for the population. The growth rate, however, was estimated from old data, based on a Swedish population.

  16. Optimal conditions of LDR to protect the kidney from diabetes

    Cheng, Jie; Li, Fengsheng; Cui, Jiuwei; Guo, Weiying; Li, Cai; Li, Wei; Wang, Guixia; Xing, Xiao; Gao, Ying; Ge, Yuanyuan; Wang, Guanjun; Cai, Lu

    2014-01-01

    Aims We reported the attenuation of diabetes-induced renal dysfunction by exposure to multiple low-dose radiation (LDR) at 25 mGy every other day via suppressing renal oxidative damage. We here explored the optimal conditions of LDR to protect the kidney from diabetes. Main methods Type 1 diabetic mice were induced with multiple injections of low-dose streptozotocin in male C57BL/6J mice. Diabetic mice received whole body X-irradiation at dose of 12.5, 25 or 50 mGy every other day for either 4 or 8 weeks. Age-matched normal mice were similarly irradiated at the dose of 25 mGy for 4 or 8 weeks. The renal function and histopathological changes were examined at the 4th and 8th week of the study. Key findings Diabetes induced renal dysfunction, shown by the decreased creatinine and increased microalbumin in urinary. Renal oxidative damage, detected by protein nitration and lipid oxidation, and remodeling, reflected by increased expression of connective tissue growth factor, collagen IV and fibronectin, were significantly increased in diabetic mice. All these renal pathological and function changes in diabetic mice were significantly attenuated by exposure to LDR at all regimens, among which, however, exposure to LDR at 12.5 mGy for 8 weeks provided the best preventive effect on the kidney of diabetic mice. Significance Our results suggest that whole-body LDR at 12.5 mGy every other day for 8 weeks is the optimal condition of LDR to protect the kidney from diabetes. PMID:24631139

  17. Optimal therapeutic conditions for online hemodiafiltration.

    Canaud, Bernard; Chenine, Leila; Renaud, Sophie; Leray, Hélène

    2011-01-01

    The safety of online hemodiafiltration (ol-HDF) relies on very strict rules of use. The use of ultrapure water to feed an ol-HDF machine is a basic requirement for ol-HDF. Technical aspects and microbial monitoring have been precisely described in the European Best Practice Guidelines. Specifically designed and certified ol-HDF machines are needed. All these machines share the production of substitution fluid by the cold sterilization process of fresh dialysate based on ultrafilters. Hygiene handling is a crucial measure to ensure permanent safety of the ol-HDF system. Frequent disinfection of the water treatment system and dialysis machine, destruction of biofilm by chemical agents and/or thermochemical disinfection, change of filters at regular intervals, and maintenance of a permanent circulation of water are among the basic measures required to ensure ultra-purity of water and dialysis fluid. Optimal performances of ol-HDF require the use of high blood flow (300-400 ml/min), highly permeable and adequately sized hemodiafilters, a high volume of substitution (5-6 l/h) and high dialysate flow (500 ml/min). The site and type of substitution (pre-, post-, mixed, and mid-dilution) should be customized to each patient according to its blood hemorheology and its filtration fraction limitation (transmembrane pressure). All attempts should be made to maximize the fluid volume exchange per session (convective dose) in any cases. The treatment schedule in terms of session duration and weekly frequency need to be adjusted individually to improve hemodynamic tolerance, to facilitate correction of fluid overload and to increase dialysis dose (for middle-sized solutes) in order to reduce circulating levels of major uremic toxins. ol-HDF is the more advanced form of renal replacement therapy offering high efficiency over a large spectrum of toxins, high biocompatibility profile and high flexible modality. ol-HDF may help to improve global care of chronic kidney disease

  18. Pointwise second-order necessary optimality conditions and second-order sensitivity relations in optimal control

    Frankowska, Hélène; Hoehener, Daniel

    2017-06-01

    This paper is devoted to pointwise second-order necessary optimality conditions for the Mayer problem arising in optimal control theory. We first show that with every optimal trajectory it is possible to associate a solution p (ṡ) of the adjoint system (as in the Pontryagin maximum principle) and a matrix solution W (ṡ) of an adjoint matrix differential equation that satisfy a second-order transversality condition and a second-order maximality condition. These conditions seem to be a natural second-order extension of the maximum principle. We then prove a Jacobson like necessary optimality condition for general control systems and measurable optimal controls that may be only ;partially singular; and may take values on the boundary of control constraints. Finally we investigate the second-order sensitivity relations along optimal trajectories involving both p (ṡ) and W (ṡ).

  19. Analysis, numerics, and optimization of algae growth

    Kumar, K.; Pisarenco, M.; Rudnaya, M.; Savcenco, V.

    2010-01-01

    We extend the mathematical model for algae growth as described in [11] to include new effects. The roles of light, nutrients and acidity of the water body are taken into account. Important properties of the model such as existence and uniqueness of solution, as well as boundedness and positivity are

  20. Modeling and optimization of algae growth

    Thornton, Anthony Richard; Weinhart, Thomas; Bokhove, Onno; Zhang, Bowen; van der Sar, Dick M.; Kumar, Kundan; Pisarenco, Maxim; Rudnaya, Maria; Savcenco, Valeriu; Rademacher, Jens; Zijlstra, Julia; Szabelska, Alicja; Zyprych, Joanna; van der Schans, Martin; Timperio, Vincent; Veerman, Frits

    2010-01-01

    The wastewater from greenhouses has a high amount of mineral contamination and an environmentally-friendly method of removal is to use algae to clean this runoff water. The algae consume the minerals as part of their growth process. In addition to cleaning the water, the created algal bio-mass has a

  1. Human fetal growth is constrained below optimal for perinatal survival

    Vasak, B.; Koenen, S. V.; Koster, M. P. H.; Hukkelhoven, C. W. P. M.; Franx, A.; Hanson, M. A.; Visser, GHA

    ObjectiveThe use of fetal growth charts assumes that the optimal size at birth is at the 50(th) birth-weight centile, but interaction between maternal constraints on fetal growth and the risks associated with small and large fetal size at birth may indicate that this assumption is not valid for

  2. Estimating the optimal growth-maximising public debt threshold for ...

    This paper attempts to estimate an optimal growth-maximising public debt threshold for Zimbabwe. The public debt threshold is estimated by assessing the relationship between public debt and economic growth. The analysis is undertaken to determine the tipping point beyond which increases in public debt adversely affect ...

  3. Transaction fees and optimal rebalancing in the growth-optimal portfolio

    Yu Feng; Matus Medo; Liang Zhang; Yi-Cheng Zhang

    2010-01-01

    The growth-optimal portfolio optimization strategy pioneered by Kelly is based on constant portfolio rebalancing which makes it sensitive to transaction fees. We examine the effect of fees on an example of a risky asset with a binary return distribution and show that the fees may give rise to an optimal period of portfolio rebalancing. The optimal period is found analytically in the case of lognormal returns. This result is consequently generalized and numerically verified for broad return di...

  4. Optimization of fermentation conditions for trehalose production by a ...

    user

    2012-02-16

    Feb 16, 2012 ... The culture conditions for the production of trehalose by Rhodotorula sp. strain were optimized. The optimum ... INTRODUCTION. Trehalose is a ..... Water interplay in trehalose ... In: Prescott DM (Ed.), Methods in Cell Biology.

  5. Statistical optimization of cultural conditions by response surface ...

    STORAGESEVER

    2009-08-04

    Aug 4, 2009 ... Full Length Research Paper. Statistical optimization of cultural conditions by response surface methodology for phenol degradation by a novel ... Phenol is a hydrocarbon compound that is highly toxic, ... Microorganism.

  6. Optimization of Surplus Reinsurance Treaty using the Conditional Tail Expectation

    Abderrahim El Attar

    2018-03-01

    Full Text Available In this work, we propose a new optimization strategy for reinsurance using the genetic algorithms. This approach is to determine an optimal structure of a "surplus" reinsurance contract by finding the optimal cession rates through an optimization model which is based on the minimization of the Conditional Tail Expectation (CTE risk measure under the constraint of technical benefit. This approach can be seen as a decision support tool that can be used by managers to minimize the actuarial risk and maximize the technical benefit in the insurance company.

  7. Optimization of Fermentation Conditions for the Production of Bacteriocin Fermentate

    2015-03-30

    FERMENTATION CONDITIONS FOR THE PRODUCTION OF BACTERIOCIN “ FERMENTATE ” by Anthony Sikes Wayne Muller and Claire Lee March 2015...From - To) October 2010 – November 2013 4. TITLE AND SUBTITLE OPTIMIZATION OF FERMENTATION CONDITIONS FOR THE PRODUCTION OF BACTERIOCIN “ FERMENTATE ...nisin and pediocin. Whey + yeast extract was the best performing whey fermentation media. The nisin producer strain Lactococcus. lactis ssp. lactis was

  8. Strong Duality and Optimality Conditions for Generalized Equilibrium Problems

    D. H. Fang

    2013-01-01

    Full Text Available We consider a generalized equilibrium problem involving DC functions. By using the properties of the epigraph of the conjugate functions, some sufficient and/or necessary conditions for the weak and strong duality results and optimality conditions for generalized equilibrium problems are provided.

  9. Optimization of Rice Bran Fermentation Conditions Enhanced by ...

    The rice bran fermentation conditions for extraction of protein concentrate was enhanced by the use of baker's yeast at optimized conditions using response surface methodology (RSM). A central composite design with three independent variables: fermentation temperature (25 to 35oC), yeast concentration (1 to 5%) and ...

  10. Management of nuclear PRs activity with optimal conditions

    Ohnishi, Teruaki

    1997-01-01

    A methodology is proposed to derive optimal conditions for the activity of nuclear public relations (PRs). With the use of data-bases available at present, expressions were derived which connect the budget allocated for the PRs activity with the intensity of stimulus for four types of activity of the advertisement in the press, the exclusive publicity, the pamphlet and the advertisement on television. Optimal conditions for the activity were determined by introducing a model describing a relation between the intensity of stimulus and the extent of the change of public's attitude to nuclear energy, namely the effect of PRs activity, and also by giving the optimal ratio of allocation of the budget among the four types of activity as a function of cost versus effectiveness of each type. Those optimal conditions, being for the ratio of allocation of the budget, the execution time and the intensity of each type of activity at that time, vary depending on the number of household in a target region, the target class of demography, the duration time of activity, and the amount of budget for the activity. It becomes clear from numerical calculation that the optimal conditions and the effect of activity show quite strong non-linearity with respect to the variation of those variables, and that the effect of PRs activity averaged over all public in the target region becomes to be maximum, in Japan, when the activity is executed with the optimal conditions determined for the target class of middle- and advanced-aged women. The management of nuclear PRs activity becomes possible by introducing such a method of fixation of optimal conditions for the activity as described here. (author)

  11. The old age security hypothesis and optimal population growth.

    Bental, B

    1989-03-01

    The application of the Samuelson-Diamond overlapping generations framework to the old age security hypothesis indicates that government intervention schemes can influence the relationship between population growth and capital accumulation. The most direct means of optimizing population growth is through taxes or subsidies that relate to the intergenerational transfer of wealth. A pay-as-you-go social security scheme, in which payment is predicated on the number of children the receiver has and is financed by taxes levied on the working population, emerges as the most likely intervention to produce the optimal steady state equilibrium. This system is able to correct any distortions the private sector may build into it. In contrast, a child support system, in which the government subsidizes or taxes workers according to their family size, can guarantee the optimal capital:labor ratio but not the optimal population growth rate. Thus, if the government seeks to decrease the population growth rate, the appropriate intervention is to levy a lump-sum social-security tax on workers and transfer the revenues to the old; the direction should be reversed if the goal is to increase population growth. Another alternative, a lump sum social security system, can guarantee optimal population growth but not a desirable capital:labor ratio. Finally, the introduction of money as a valued commodity into an economy with a high capital:labor ratio will also serve to decrease the population growth rate and solve the intergenerational transfer problem through the private sector without any need for government intervention.

  12. Thermodynamic analysis of multicomponent distillation columns: identifying optimal feed conditions

    M. L.O. Maia

    2000-12-01

    Full Text Available A new methodology for the optimisation of feed conditions as well as the calculation of minimum reflux ratio of distillation columns is presented. The reversible profile approach used for saturated liquid feeds is extended to consider other feed conditions. For flashed feed, the liquid fraction of the feed stream is used to compute the column pinch conditions and the minimum reflux ratio. The modifications required for subcooled liquid and superheated vapor feed are discussed, and a procedure to estimate the minimum reflux for those conditions is proposed. The methodology presented allows the identification of the optimal feed condition, without having to resort to a full stage-by-stage procedure.

  13. Optimal Patent Life in a Variety-Expansion Growth Model

    Lin, Hwan C.

    2013-01-01

    This paper presents more channels through which the optimal patent life is determined in a R&D-based endogenous growth model that permits growth of new varieties of consumer goods over time. Its modeling features include an endogenous hazard rate facing incumbent monopolists, the prevalence of research congestion, and the aggregate welfare importance of product differentiation. As a result, a patent’s effective life is endogenized and less than its legal life. The model is calibrated to a glo...

  14. Study on growth condition of Trichoderma mutants

    Chen Jian'ai; Xiao Min; Wang Weiming; Chen Weijing; Sun Yongtang

    2002-01-01

    Some Trichoderma mutants were cultured under different conditions 4 strains, T5, T0803, T1010, T1003 were selected with different mediums and every medium was mixed with fungicide of 40 ppm. The fungicides were procymidone + chlorothalonil, maneb and phosethyl-Al. The pH of medium were 5, 6, 7 and 8, respectively. The growing temperatures were 15, 20, 25 and 30 degree C, respectively. After the hypha growing for some days under natural high temperature, they were put in low temperature for producing spores. The growing times for these hypha were 3,4,5 and 6 days, respectively. All dates were analyzed on statistics with the orthogonal array and ranges (R) were different with different factor and levels (R = 40.4, 42.4, 48.0, 62.8, 107.0). The results showed that the strain was the most influent condition (R = 107.0) and the changed temperature time from high to low was the least influent condition (R = 40.4). Each factor variance was significant and A 3 b 4 C 2 D 1 E 3 was the optimum combined condition, under which T1010 grew more quickly and produced the most spores

  15. Optimality conditions for the numerical solution of optimization problems with PDE constraints :

    Aguilo Valentin, Miguel Alejandro; Ridzal, Denis

    2014-03-01

    A theoretical framework for the numerical solution of partial di erential equation (PDE) constrained optimization problems is presented in this report. This theoretical framework embodies the fundamental infrastructure required to e ciently implement and solve this class of problems. Detail derivations of the optimality conditions required to accurately solve several parameter identi cation and optimal control problems are also provided in this report. This will allow the reader to further understand how the theoretical abstraction presented in this report translates to the application.

  16. Optimal growth when environmental quality is a research asset

    Groth, Christian; Ricci, Francesco

    2011-01-01

    We advance an original assumption whereby a good state of the environment positively affects labor productivity in R&D such that deteriorating environmental quality negatively impacts R&D. We study the implications of this assumption for the optimal solution in an R&D-based model of growth, where......, we find that it is optimal to re-allocate employment to R&D in line with productivity changes. If environmental quality recovers only partially from pollution, R&D effort optimally begins above its long-run level, then progressively declines to a minimum and eventually increases to its steady...

  17. Eutectic growth under acoustic levitation conditions.

    Xie, W J; Cao, C D; Lü, Y J; Wei, B

    2002-12-01

    Samples of Pb-Sn eutectic alloy with a high density of 8.5 x 10(3) kg/m(3) are levitated with a single-axis acoustic levitator, and containerlessly melted and then solidified in argon atmosphere. High undercoolings up to 38 K are obtained, which results in a microstructural transition of "lamellas-broken lamellas-dendrites." This transition is further investigated in the light of the coupled zone for eutectic growth and the effects of ultrasound. The breaking of regular eutectic lamellas and suppression of gravity-induced macrosegregation of (Pb) and (Sn) dendrites are explained by the complicated internal flow inside the levitated drop, which is jointly induced by the shape oscillation, bulk vibration and rotation of the levitated drop. The ultrasonic field is also found to drive forced surface vibration, which subsequently excites capillary ripples and catalyzes nucleation on the sample surface.

  18. Global Sufficient Optimality Conditions for a Special Cubic Minimization Problem

    Xiaomei Zhang

    2012-01-01

    Full Text Available We present some sufficient global optimality conditions for a special cubic minimization problem with box constraints or binary constraints by extending the global subdifferential approach proposed by V. Jeyakumar et al. (2006. The present conditions generalize the results developed in the work of V. Jeyakumar et al. where a quadratic minimization problem with box constraints or binary constraints was considered. In addition, a special diagonal matrix is constructed, which is used to provide a convenient method for justifying the proposed sufficient conditions. Then, the reformulation of the sufficient conditions follows. It is worth noting that this reformulation is also applicable to the quadratic minimization problem with box or binary constraints considered in the works of V. Jeyakumar et al. (2006 and Y. Wang et al. (2010. Finally some examples demonstrate that our optimality conditions can effectively be used for identifying global minimizers of the certain nonconvex cubic minimization problem.

  19. Prederivatives of gamma paraconvex set-valued maps and Pareto optimality conditions for set optimization problems.

    Huang, Hui; Ning, Jixian

    2017-01-01

    Prederivatives play an important role in the research of set optimization problems. First, we establish several existence theorems of prederivatives for γ -paraconvex set-valued mappings in Banach spaces with [Formula: see text]. Then, in terms of prederivatives, we establish both necessary and sufficient conditions for the existence of Pareto minimal solution of set optimization problems.

  20. Optimality Conditions for Fuzzy Number Quadratic Programming with Fuzzy Coefficients

    Xue-Gang Zhou

    2014-01-01

    Full Text Available The purpose of the present paper is to investigate optimality conditions and duality theory in fuzzy number quadratic programming (FNQP in which the objective function is fuzzy quadratic function with fuzzy number coefficients and the constraint set is fuzzy linear functions with fuzzy number coefficients. Firstly, the equivalent quadratic programming of FNQP is presented by utilizing a linear ranking function and the dual of fuzzy number quadratic programming primal problems is introduced. Secondly, we present optimality conditions for fuzzy number quadratic programming. We then prove several duality results for fuzzy number quadratic programming problems with fuzzy coefficients.

  1. Transaction fees and optimal rebalancing in the growth-optimal portfolio

    Feng, Yu; Medo, Matúš; Zhang, Liang; Zhang, Yi-Cheng

    2011-05-01

    The growth-optimal portfolio optimization strategy pioneered by Kelly is based on constant portfolio rebalancing which makes it sensitive to transaction fees. We examine the effect of fees on an example of a risky asset with a binary return distribution and show that the fees may give rise to an optimal period of portfolio rebalancing. The optimal period is found analytically in the case of lognormal returns. This result is consequently generalized and numerically verified for broad return distributions and returns generated by a GARCH process. Finally we study the case when investment is rebalanced only partially and show that this strategy can improve the investment long-term growth rate more than optimization of the rebalancing period.

  2. Necessary optimality conditions of the second oder in a stochastic optimal control problem with delay argument

    Rashad O. Mastaliev

    2016-12-01

    Full Text Available The optimal control problem of nonlinear stochastic systems which mathematical model is given by Ito stochastic differential equation with delay argument is considered. Assuming that the concerned region is open for the control by the first and the second variation (classical sense of the quality functional we obtain the necessary optimality condition of the first and the second order. In the particular case we receive the stochastic analog of the Legendre—Clebsch condition and some constructively verified conclusions from the second order necessary condition. We investigate the Legendre–Clebsch conditions for the degeneration case and obtain the necessary conditions of optimality for a special control, in the classical sense.

  3. Conditions for mould growth on typical interior surfaces

    Møller, Eva B.; Andersen, Birgitte; Rode, Carsten

    2017-01-01

    Prediction of the risk for mould growth is an important parameter for the analysis and design of the hygrothermal performance of building constructions. However, in practice the mould growth does not always follow the predicted behavior described by the mould growth models. This is often explained...... by uncertainty in the real conditions of exposure. In this study, laboratory experiments were designed to determine mould growth at controlled transient climate compared to growth at constant climate. The experiment included three building materials with four different surface treatments. The samples were...

  4. An optimal thermal condition for maximal chlorophyll extraction

    Fu Jia-Jia

    2017-01-01

    Full Text Available This work describes an environmentally friendly process for chlorophyll extraction from bamboo leaves. Shaking water bath and ultrasound cleaner are adopted in this technology, and the influence of temperature of the water bath and ultrasonic cleaner is evaluated. Results indicated that there is an optimal condition for maximal yield of chlorophyll.

  5. Comparison of the optimized conditions for genotyping of ACE ID ...

    ACE ID polymorphism is inevitable for genetic epidemiology of several cardiovascular and non cardiovascular diseases due to its direct influence on ACE activity level. In the present work, conditions were optimized for its analysis using conventional and direct blood PCR (DB PCR). Blood samples from nine normotensive ...

  6. Optimal Conditional Reachability for Multi-Priced Timed Automata

    Larsen, Kim Guldstrand; Rasmussen, Jacob Illum

    2005-01-01

    In this paper, we prove decidability of the optimal conditional reachability problem for multi-priced timed automata, an extension of timed automata with multiple cost variables evolving according to given rates for each location. More precisely, we consider the problem of determining the minimal...

  7. Optimizing conditions for calcium phosphate mediated transient transfection

    Ling Guo

    2017-03-01

    Conclusions: Calcium phosphate mediated transfection is the most low-cost approach to introduce recombinant DNA into culture cells. However, the utility of this procedure is limited in highly-differentiated cells. Here we describe the specific HBS-buffered saline, PH, glycerol shock, vortex strength, transfection medium, and particle concentrations conditions necessary to optimize this transfection method in highly differentiated cells.

  8. Response Surface Methodology: An Extensive Potential to Optimize in vivo Photodynamic Therapy Conditions

    Tirand, Loraine; Bastogne, Thierry; Bechet, Denise M.Sc.; Linder, Michel; Thomas, Noemie; Frochot, Celine; Guillemin, Francois; Barberi-Heyob, Muriel

    2009-01-01

    Purpose: Photodynamic therapy (PDT) is based on the interaction of a photosensitizing (PS) agent, light, and oxygen. Few new PS agents are being developed to the in vivo stage, partly because of the difficulty in finding the right treatment conditions. Response surface methodology, an empirical modeling approach based on data resulting from a set of designed experiments, was suggested as a rational solution with which to select in vivo PDT conditions by using a new peptide-conjugated PS targeting agent, neuropilin-1. Methods and Materials: A Doehlert experimental design was selected to model effects and interactions of the PS dose, fluence, and fluence rate on the growth of U87 human malignant glioma cell xenografts in nude mice, using a fixed drug-light interval. All experimental results were computed by Nemrod-W software and Matlab. Results: Intrinsic diameter growth rate, a tumor growth parameter independent of the initial volume of the tumor, was selected as the response variable and was compared to tumor growth delay and relative tumor volumes. With only 13 experimental conditions tested, an optimal PDT condition was selected (PS agent dose, 2.80 mg/kg; fluence, 120 J/cm 2 ; fluence rate, 85 mW/cm 2 ). Treatment of glioma-bearing mice with the peptide-conjugated PS agent, followed by the optimized PDT condition showed a statistically significant improvement in delaying tumor growth compared with animals who received the PDT with the nonconjugated PS agent. Conclusions: Response surface methodology appears to be a useful experimental approach for rapid testing of different treatment conditions and determination of optimal values of PDT factors for any PS agent.

  9. Design of Multijunction Photovoltaic Cells Optimized for Varied Atmospheric Conditions

    C. Zhang

    2014-01-01

    Full Text Available Band gap engineering provides an opportunity to not only provide higher overall conversion efficiencies of the reference AM1.5 spectra but also customize PV device design for specific geographic locations and microenvironments based on atmospheric conditions characteristic to that particular location. Indium gallium nitride and other PV materials offer the opportunity for limited bandgap engineering to match spectra. The effects of atmospheric conditions such as aerosols, cloud cover, water vapor, and air mass have been shown to cause variations in spectral radiance that alters PV system performance due to both overrating and underrating. Designing PV devices optimized for spectral radiance of a particular region can result in improved PV system performance. This paper presents a new method for designing geographically optimized PV cells with using a numerical model for bandgap optimization. The geographic microclimate spectrally resolved solar flux for twelve representative atmospheric conditions for the incident radiation angle (zenith angle of 48.1° and fixed array angle of 40° is used to iteratively optimize the band gap for tandem, triple, and quad-layer of InGaN-based multijunction cells. The results of this method are illustrated for the case study of solar farms in the New York region and discussed.

  10. Condition Monitoring of Sensors in a NPP Using Optimized PCA

    Wei Li

    2018-01-01

    Full Text Available An optimized principal component analysis (PCA framework is proposed to implement condition monitoring for sensors in a nuclear power plant (NPP in this paper. Compared with the common PCA method in previous research, the PCA method in this paper is optimized at different modeling procedures, including data preprocessing stage, modeling parameter selection stage, and fault detection and isolation stage. Then, the model’s performance is greatly improved through these optimizations. Finally, sensor measurements from a real NPP are used to train the optimized PCA model in order to guarantee the credibility and reliability of the simulation results. Meanwhile, artificial faults are sequentially imposed to sensor measurements to estimate the fault detection and isolation ability of the proposed PCA model. Simulation results show that the optimized PCA model is capable of detecting and isolating the sensors regardless of whether they exhibit major or small failures. Meanwhile, the quantitative evaluation results also indicate that better performance can be obtained in the optimized PCA method compared with the common PCA method.

  11. Discounted cost model for condition-based maintenance optimization

    Weide, J.A.M. van der; Pandey, M.D.; Noortwijk, J.M. van

    2010-01-01

    This paper presents methods to evaluate the reliability and optimize the maintenance of engineering systems that are damaged by shocks or transients arriving randomly in time and overall degradation is modeled as a cumulative stochastic point process. The paper presents a conceptually clear and comprehensive derivation of formulas for computing the discounted cost associated with a maintenance policy combining both condition-based and age-based criteria for preventive maintenance. The proposed discounted cost model provides a more realistic basis for optimizing the maintenance policies than those based on the asymptotic, non-discounted cost rate criterion.

  12. Priority target conditions for algorithms for monitoring children's growth: Interdisciplinary consensus.

    Pauline Scherdel

    Full Text Available Growth monitoring of apparently healthy children aims at early detection of serious conditions through the use of both clinical expertise and algorithms that define abnormal growth. Optimization of growth monitoring requires standardization of the definition of abnormal growth, and the selection of the priority target conditions is a prerequisite of such standardization.To obtain a consensus about the priority target conditions for algorithms monitoring children's growth.We applied a formal consensus method with a modified version of the RAND/UCLA method, based on three phases (preparatory, literature review, and rating, with the participation of expert advisory groups from the relevant professional medical societies (ranging from primary care providers to hospital subspecialists as well as parent associations. We asked experts in the pilot (n = 11, reading (n = 8 and rating (n = 60 groups to complete the list of diagnostic classification of the European Society for Paediatric Endocrinology and then to select the conditions meeting the four predefined criteria of an ideal type of priority target condition.Strong agreement was obtained for the 8 conditions selected by the experts among the 133 possible: celiac disease, Crohn disease, craniopharyngioma, juvenile nephronophthisis, Turner syndrome, growth hormone deficiency with pituitary stalk interruption syndrome, infantile cystinosis, and hypothalamic-optochiasmatic astrocytoma (in decreasing order of agreement.This national consensus can be used to evaluate the algorithms currently suggested for growth monitoring. The method used for this national consensus could be re-used to obtain an international consensus.

  13. Influence of Different Growth Conditions on the Kefir Grains Production, used in the Kefiran Synthesis

    Carmen Rodica Pop

    2014-11-01

    Full Text Available The purpose of this study was to optimize the kefir grains biomass production, using milk as culture media. The kefir grains were cultured at different changed conditions (temperature, time, shaker rotating speed, culture media supplemented to evaluate their effects. Results showed that optimal culture conditions were using the organic skim milk, incubated at 25°C for 24 hours with a rotation rate of 125 rpm. According to results, the growth rate was 38.9 g/L for 24 h, at 25°C using the organic milk - OSM, 36.87 g/L during 24 hours, optimal time for propagation process gave 37.93 g/L kefir grains biomass when the effect of temperature level was tested. The homogenization of medium with shaker rotating induced a greater growth rate, it was obtained 38.9 g/L for 24 h, at 25°C using rotation rate at 125 rpm. The growing medium (conventional milk supplemented with different minerals and vitamins may lead to improve the growth conditions of kefir grains biomass. The optimization of the growth environment is very important for achieving the maximum production of kefir grains biomass, substrate necessary to obtain the polysaccharide kefiran

  14. Optimal energy growth in a stably stratified shear flow

    Jose, Sharath; Roy, Anubhab; Bale, Rahul; Iyer, Krithika; Govindarajan, Rama

    2018-02-01

    Transient growth of perturbations by a linear non-modal evolution is studied here in a stably stratified bounded Couette flow. The density stratification is linear. Classical inviscid stability theory states that a parallel shear flow is stable to exponentially growing disturbances if the Richardson number (Ri) is greater than 1/4 everywhere in the flow. Experiments and numerical simulations at higher Ri show however that algebraically growing disturbances can lead to transient amplification. The complexity of a stably stratified shear flow stems from its ability to combine this transient amplification with propagating internal gravity waves (IGWs). The optimal perturbations associated with maximum energy amplification are numerically obtained at intermediate Reynolds numbers. It is shown that in this wall-bounded flow, the three-dimensional optimal perturbations are oblique, unlike in unstratified flow. A partitioning of energy into kinetic and potential helps in understanding the exchange of energies and how it modifies the transient growth. We show that the apportionment between potential and kinetic energy depends, in an interesting manner, on the Richardson number, and on time, as the transient growth proceeds from an optimal perturbation. The oft-quoted stabilizing role of stratification is also probed in the non-diffusive limit in the context of disturbance energy amplification.

  15. Nonlinear Chance Constrained Problems: Optimality Conditions, Regularization and Solvers

    Adam, Lukáš; Branda, Martin

    2016-01-01

    Roč. 170, č. 2 (2016), s. 419-436 ISSN 0022-3239 R&D Projects: GA ČR GA15-00735S Institutional support: RVO:67985556 Keywords : Chance constrained programming * Optimality conditions * Regularization * Algorithms * Free MATLAB codes Subject RIV: BB - Applied Statistics, Operational Research Impact factor: 1.289, year: 2016 http://library.utia.cas.cz/separaty/2016/MTR/adam-0460909.pdf

  16. Calculation of optimal outdoor enclosure in the arctic conditions

    Tarabukina, Sardaana; Simankina, Tatyana; Pykhtin, Kirill; Grabovyy, Kirill

    2017-10-01

    Definition of optimal thickness of thermal insulating materials, prevention of frost penetration and overheat and provision of proper thermal efficiency is an important problem in arctic conditions. This article demonstrates the results of thermotechnical calculations of enclosing constructions using SHADDAN software and economic calculations made in RIK software. These results allowed us to perform comparative analysis of two building technologies: «thermal block» and «render system». Both options met regulatory heat transfer requirements. However, regarding cost efficiency, use of «thermal blocks» technology is more effective in arctic conditions.

  17. Convex variational problems linear, nearly linear and anisotropic growth conditions

    Bildhauer, Michael

    2003-01-01

    The author emphasizes a non-uniform ellipticity condition as the main approach to regularity theory for solutions of convex variational problems with different types of non-standard growth conditions. This volume first focuses on elliptic variational problems with linear growth conditions. Here the notion of a "solution" is not obvious and the point of view has to be changed several times in order to get some deeper insight. Then the smoothness properties of solutions to convex anisotropic variational problems with superlinear growth are studied. In spite of the fundamental differences, a non-uniform ellipticity condition serves as the main tool towards a unified view of the regularity theory for both kinds of problems.

  18. Optimal growth entails risky localization in population dynamics

    Gueudré, Thomas; Martin, David G.

    2018-03-01

    Essential to each other, growth and exploration are jointly observed in alive and inanimate entities, such as animals, cells or goods. But how the environment's structural and temporal properties weights in this balance remains elusive. We analyze a model of stochastic growth with time correlations and diffusive dynamics that sheds light on the way populations grow and spread over general networks. This model suggests natural explanations of empirical facts in econo-physics or ecology, such as the risk-return trade-off and the Zipf law. We conclude that optimal growth leads to a localized population distribution, but such risky position can be mitigated through the space geometry. These results have broad applicability and are subsequently illustrated over an empirical study of financial data.

  19. Constraint qualifications and optimality conditions for optimization problems with cardinality constraints

    Červinka, Michal; Kanzow, Ch.; Schwartz, A.

    2016-01-01

    Roč. 160, č. 1 (2016), s. 353-377 ISSN 0025-5610 R&D Projects: GA ČR GAP402/12/1309; GA ČR GA15-00735S Institutional support: RVO:67985556 Keywords : Cardinality constraints * Constraint qualifications * Optimality conditions * KKT conditions * Strongly stationary points Subject RIV: BA - General Mathematics Impact factor: 2.446, year: 2016 http://library.utia.cas.cz/separaty/2016/MTR/cervinka-0461165.pdf

  20. Optimizing acoustical conditions for speech intelligibility in classrooms

    Yang, Wonyoung

    High speech intelligibility is imperative in classrooms where verbal communication is critical. However, the optimal acoustical conditions to achieve a high degree of speech intelligibility have previously been investigated with inconsistent results, and practical room-acoustical solutions to optimize the acoustical conditions for speech intelligibility have not been developed. This experimental study validated auralization for speech-intelligibility testing, investigated the optimal reverberation for speech intelligibility for both normal and hearing-impaired listeners using more realistic room-acoustical models, and proposed an optimal sound-control design for speech intelligibility based on the findings. The auralization technique was used to perform subjective speech-intelligibility tests. The validation study, comparing auralization results with those of real classroom speech-intelligibility tests, found that if the room to be auralized is not very absorptive or noisy, speech-intelligibility tests using auralization are valid. The speech-intelligibility tests were done in two different auralized sound fields---approximately diffuse and non-diffuse---using the Modified Rhyme Test and both normal and hearing-impaired listeners. A hybrid room-acoustical prediction program was used throughout the work, and it and a 1/8 scale-model classroom were used to evaluate the effects of ceiling barriers and reflectors. For both subject groups, in approximately diffuse sound fields, when the speech source was closer to the listener than the noise source, the optimal reverberation time was zero. When the noise source was closer to the listener than the speech source, the optimal reverberation time was 0.4 s (with another peak at 0.0 s) with relative output power levels of the speech and noise sources SNS = 5 dB, and 0.8 s with SNS = 0 dB. In non-diffuse sound fields, when the noise source was between the speaker and the listener, the optimal reverberation time was 0.6 s with

  1. Optimized conditions for chelation of yttrium-90-DOTA immunoconjugates.

    Kukis, D L; DeNardo, S J; DeNardo, G L; O'Donnell, R T; Meares, C F

    1998-12-01

    Radioimmunotherapy (RIT) with 90Y-labeled immunoconjugates has shown promise in clinical trials. The macrocyclic chelating agent 1,4,7,10-tetraazacyclododecane-N,N',N",N"'-tetraacetic acid (DOTA) binds 90Y with extraordinary stability, minimizing the toxicity of 90Y-DOTA immunoconjugates arising from loss of 90Y to bone. However, reported 90Y-DOTA immunoconjugate product yields have been typically only BAD) was conjugated to the monoclonal antibody Lym-1 via 2-iminothiolane (2IT). The immunoconjugate product, 2IT-BAD-Lym-1, was labeled in excess yttrium in various buffers over a range of concentrations and pH. Kinetic studies were performed in selected buffers to estimate radiolabeling reaction times under prospective radiopharmacy labeling conditions. The effect of temperature on reaction kinetics was examined. Optimal radiolabeling conditions were identified and used in eight radiolabeling experiments with 2IT-BAD-Lym-1 and a second immunoconjugate, DOTA-peptide-chimeric L6, with 248-492 MBq (6.7-13.3 mCi) of 90Y. Ammonium acetate buffer (0.5 M) was associated with the highest uptake of yttrium. On the basis of kinetic data, the time required to chelate 94% of 90Y (four half-times) under prospective radiopharmacy labeling conditions in 0.5 M ammonium acetate was 17-148 min at pH 6.5, but it was only 1-10 min at pH 7.5. Raising the reaction temperature from 25 degrees C to 37 degrees C markedly increased the chelation rate. Optimal radiolabeling conditions were identified as: 30-min reaction time, 0.5 M ammonium acetate buffer, pH 7-7.5 and 37 degrees C. In eight labeling experiments under optimal conditions, a mean product yield (+/- s.d.) of 91%+/-8% was achieved, comparable to iodination yields. The specific activity of final products was 74-130 MBq (2.0-3.5 mCi) of 90Y per mg of monoclonal antibody. The immunoreactivity of 90Y-labeled immunoconjugates was 100%+/-11%. The optimization of 90Y-DOTA chelation conditions represents an important advance in 90Y RIT

  2. Optimal Time to Invest Energy Storage System under Uncertainty Conditions

    Yongma Moon

    2014-04-01

    Full Text Available This paper proposes a model to determine the optimal investment time for energy storage systems (ESSs in a price arbitrage trade application under conditions of uncertainty over future profits. The adoption of ESSs can generate profits from price arbitrage trade, which are uncertain because the future marginal prices of electricity will change depending on supply and demand. In addition, since the investment is optional, an investor can delay adopting an ESS until it becomes profitable, and can decide the optimal time. Thus, when we evaluate this investment, we need to incorporate the investor’s option which is not captured by traditional evaluation methods. In order to incorporate these aspects, we applied real option theory to our proposed model, which provides an optimal investment threshold. Our results concerning the optimal time to invest show that if future profits that are expected to be obtained from arbitrage trade become more uncertain, an investor needs to wait longer to invest. Also, improvement in efficiency of ESSs can reduce the uncertainty of arbitrage profit and, consequently, the reduced uncertainty enables earlier ESS investment, even for the same power capacity. Besides, when a higher rate of profits is expected and ESS costs are higher, an investor needs to wait longer. Also, by comparing a widely used net present value model to our real option model, we show that the net present value method underestimates the value for ESS investment and misleads the investor to make an investment earlier.

  3. Modified atmospheric conditions controlling fungal growth on cheese

    Nielsen, Per Væggemose

    1997-01-01

    Effective control of fungal growth on cheese under storage conditions is of great concern for the dairy industry. Therefore we designed a research project together with the Danish dairy industry on modelling fungal growth on cheese as affected by the combined effect of storage conditions (O2 and CO......2 level, relative humidity and temperature) and the composition of the cheese. All fungal species commonly found on cheese, starter cultures as well as contaminants, were examined.The most important factors influencing fungal growth are temperature, water activity of the medium and the carbon...... a competitive advantage over other fungi in moist conditions with high carbon dioxide levels, such as inside a roquefort cheese or in gas tight grain storage. The key to success in food packaging is to recognise the food ecosystem, as it enables us to identify which micro...

  4. Technical conditions for sustainable growth in economic theory. An analysis

    Granda C, Catalina

    2008-01-01

    Economic theory and its models point out returns to scale, substitution among productive factors and technological progress as conditions for sustainable growth. This work aims at a critical appraisal of these conditions, particularly the ones related to substitution between natural resources and manmade capital and technical change, by recognizing the inevitable physical scarcity of resources concomitant to the human actions in a world governed by hemodynamic restrictions. To do so, the role that the mentioned conditions play in the theories of economic growth with resources is analyzed, and its limitations and objections from a biophysical perspective are indicated as well. Finally, a brief consideration as to how inappropriate the theoretical representations of economic activities are to take account of growth in spite of resource exhaustion or degradation is carried out

  5. Chinese National Condition Based Power Dispatching Optimization in Microgrids

    Gang Chen

    2018-01-01

    Full Text Available This paper proposed a study on the power dispatching optimization in the microgrid aiming at Chinese national condition based on PSO algorithm. The whole work is on the basis of the weighted factor variation of the objective function due to different weather conditions. Three cases including the good contamination-diffusing weather condition, the smog weather condition, and the normal condition are considered, respectively. In the case of smog weather, the new energy generation and the battery system will be all out to use as less power as possible from the primary grid so that the pollution produced by coal consumption in the thermal power plants can be upmost reduced. However, in the case of perfect contamination-diffusing weather, the battery is not used to reserve its lifetime, while a large amount of exchanged power from the primary grid is used to obtain a most economic-efficient effect. In normal condition, the power dispatching is performed in a most balanced way considering not only the cost but also the environmental management. The case study in Suzhou Industrial Part confirms the effectiveness of the proposed method in this paper.

  6. Biodegradation of kerosene: Study of growth optimization and metabolic fate of P. janthinellum SDX7

    Shamiyan R. Khan

    2015-06-01

    Full Text Available Penicillum janthinellum SDX7 was isolated from aged petroleum hydrocarbon-affected soil at the site of Anand, Gujarat, India, and was tested for different pH, temperature, agitation and concentrations for optimal growth of the isolate that was capable of degrading upto 95%, 63% and 58% of 1%, 3% and 5% kerosene, respectively, after a period of 16 days, at optimal growth conditions of pH 6.0, 30 °C and 180 rpm agitation. The GC/MS chromatograms revealed that then-alkane fractions are easily degraded; however, the rate might be lower for branched alkanes, n-alkylaromatics, cyclic alkanes and polynuclear aromatics. The test doses caused a concentration-dependent depletion of carbohydrates of P. janthinellum SDX7 by 3% to 80%, proteins by 4% to 81% and amino acids by 8% to 95% upto 16 days of treatment. The optimal concentration of 3% kerosene resulted in the least reduction of the metabolites of P. janthinellum such as carbohydrates, proteins and amino acids with optimal growth compared to 5% and 1% (v/v kerosene doses on the 12th and 16th day of exposure. Phenols were found to be mounted by 43% to 66% at lower and higher concentrations during the experimental period. Fungal isolate P. janthinellum SDX7 was also tested for growth on various xenobiotic compounds.

  7. Optimal condition of memristance enhancement circuit using external voltage source

    Hiroya Tanaka

    2014-05-01

    Full Text Available Memristor provides nonlinear response in the current-voltage characteristic and the memristance is modulated using an external voltage source. We point out by solving nonlinear equations that an optimal condition of the external voltage source exists for maximizing the memristance in such modulation scheme. We introduce a linear function to describe the nonlinear time response and derive an important design guideline; a constant ratio of the frequency to the amplitude of the external voltage source maximizes the memristance. The analysis completely accounts for the memristance behavior.

  8. Optimization of Thermo-mechanical Conditions in Friction Stir Welding

    Tutum, Cem Celal

    with the Seqquential Quadratic Programming (SQP) gradient-based optimization algorithm in order to find the welding speed and the heat input that would yield a prescribed average temperature close to the solidus temperature under the tool, thereby expressing a condition which is favourable for the process.......Several models for the FSW process have been applied. Initially, the thermal models were addressed since they in essence constitute the basis of all other models of FSW, be it microstructural, flow or residual stress models. Both analytical and numerical models were used and combined...

  9. Optimization of Growth Medium for Efficient Cultivation of Lactobacillus salivarius i 24 using Response Surface Method

    Lim, C. H.

    2007-01-01

    Full Text Available Production of Lactobacillus salivarius i 24, a probiotic strain for chicken, was studied in batch fermentation using 500 mL Erlenmeyer flask. Response surface method (RSM was used to optimize the medium for efficient cultivation of the bacterium. The factors investigated were yeast extract, glucose and initial culture pH. A polynomial regression model with cubic and quartic terms was used for the analysis of the experimental data. Estimated optimal conditions of the factors for growth of L. salivarius i 24 were; 3.32 % (w/v glucose, 4.31 % (w/v yeast extract and initial culture pH of 6.10.

  10. Evaluating and optimizing horticultural regimes in space plant growth facilities

    Berkovich, Y.; Chetirkin, R.; Wheeler, R.; Sager, J.

    In designing innovative Space Plant Growth Facilities (SPGF) for long duration space f ightl various limitations must be addressed including onboard resources: volume, energy consumption, heat transfer and crew labor expenditure. The required accuracy in evaluating onboard resources by using the equivalent mass methodology and applying it to the design of such facilities is not precise. This is due to the uncertainty of the structure and not completely understanding of the properties of all associated hardware, including the technology in these systems. We present a simple criteria of optimization for horticultural regimes in SPGF: Qmax = max [M · (EBI) 2 / (V · E · T) ], where M is the crop harvest in terms of total dry biomass in the plant growth system; EBI is the edible biomass index (harvest index), V is a volume occupied by the crop; E is the crop light energy supply during growth; T is the crop growth duration. The criterion reflects directly on the consumption of onboard resources for crop production. We analyzed the efficiency of plant crops and the environmental parameters by examining the criteria for 15 salad and 12 wheat crops from the data in the ALS database at Kennedy Space Center. Some following conclusion have been established: 1. The technology involved in growing salad crops on a cylindrical type surface provides a more meaningful Q-criterion; 2. Wheat crops were less efficient than leafy greens (salad crops) when examining resource utilization; 3. By increasing light intensity of the crop the efficiency of the resource utilization could decrease. Using the existing databases and Q-criteria we have found that the criteria can be used in optimizing design and horticultural regimes in the SPGF.

  11. Optimality Conditions in Differentiable Vector Optimization via Second-Order Tangent Sets

    Jimenez, Bienvenido; Novo, Vicente

    2004-01-01

    We provide second-order necessary and sufficient conditions for a point to be an efficient element of a set with respect to a cone in a normed space, so that there is only a small gap between necessary and sufficient conditions. To this aim, we use the common second-order tangent set and the asymptotic second-order cone utilized by Penot. As an application we establish second-order necessary conditions for a point to be a solution of a vector optimization problem with an arbitrary feasible set and a twice Frechet differentiable objective function between two normed spaces. We also establish second-order sufficient conditions when the initial space is finite-dimensional so that there is no gap with necessary conditions. Lagrange multiplier rules are also given

  12. Determination of optimal conditions of oxytetracyclin production from streptomyces rimosus

    Zouaghi, Atef

    2007-01-01

    Streptomyces rimosus is an oxytetracycline (OTC) antibiotic producing bacteria that exhibited activities against gram positive and negative bacteria. OTC is used widely not only in medicine but also in production industry. The antibiotic production of streptomyces covers a very wide range of condition. However, antibiotic producers are particularly fastidious cultivated by proper selection of media such as carbon source. In present study we have optimised conditions of OTC production (Composition of production media, p H, shaking and temperature). The results have been shown that bran barley is the optimal media for OTC production at 28C pH5.8 at 150rpm for 5 days. For antibiotic determination, OTC was extracted with different organic solvent. Thin-layer chromatography system was used for separation and identification of OTC antibiotic. High performance liquid chromatographic (HPLC) method with ultraviolet detection for the analysis of OTC is applied to the determination of OTC purification. (Author). 24 refs

  13. Evaluation of optimization strategies and the effect of initial conditions on IMAT optimization using a leaf position optimization algorithm

    Oliver, Mike; Jensen, Michael; Chen, Jeff; Wong, Eugene

    2009-01-01

    Intensity-modulated arc therapy (IMAT) is a rotational variant of intensity-modulated radiation therapy (IMRT) that can be implemented with or without angular dose rate variation. The purpose of this study is to assess optimization strategies and initial conditions using a leaf position optimization (LPO) algorithm altered for variable dose rate IMAT. A concave planning target volume (PTV) with a central cylindrical organ at risk (OAR) was used in this study. The initial IMAT arcs were approximated by multiple static beams at 5 deg. angular increments where multi-leaf collimator (MLC) leaf positions were determined from the beam's eye view to irradiate the PTV but avoid the OAR. For the optimization strategy, two arcs with arc ranges of 280 deg. and 150 deg. were employed and plans were created using LPO alone, variable dose rate optimization (VDRO) alone, simultaneous LPO and VDRO and sequential combinations of these strategies. To assess the MLC initialization effect, three single 360 deg. arc plans with different initial MLC configurations were generated using the simultaneous LPO and VDRO. The effect of changing optimization degrees of freedom was investigated by employing 3 deg., 5 deg. and 10 deg. angular sampling intervals for the two 280 deg., two 150 deg. and single arc plans using LPO and VDRO. The objective function value, a conformity index, a dose homogeneity index, mean dose to OAR and normal tissues were computed and used to evaluate the treatment plans. This study shows that the best optimization strategy for a concave target is to use simultaneous MLC LPO and VDRO. We found that the optimization result is sensitive to the choice of initial MLC aperture shapes suggesting that an LPO-based IMAT plan may not be able to overcome local minima for this geometry. In conclusion, simultaneous MLC leaf position and VDRO are needed with the most appropriate initial conditions (MLC positions, arc ranges and number of arcs) for IMAT.

  14. Optimal operating conditions for maximum biogas production in anaerobic bioreactors

    Balmant, W.; Oliveira, B.H.; Mitchell, D.A.; Vargas, J.V.C.; Ordonez, J.C.

    2014-01-01

    The objective of this paper is to demonstrate the existence of optimal residence time and substrate inlet mass flow rate for maximum methane production through numerical simulations performed with a general transient mathematical model of an anaerobic biodigester introduced in this study. It is herein suggested a simplified model with only the most important reaction steps which are carried out by a single type of microorganisms following Monod kinetics. The mathematical model was developed for a well mixed reactor (CSTR – Continuous Stirred-Tank Reactor), considering three main reaction steps: acidogenesis, with a μ max of 8.64 day −1 and a K S of 250 mg/L, acetogenesis, with a μ max of 2.64 day −1 and a K S of 32 mg/L, and methanogenesis, with a μ max of 1.392 day −1 and a K S of 100 mg/L. The yield coefficients were 0.1-g-dry-cells/g-pollymeric compound for acidogenesis, 0.1-g-dry-cells/g-propionic acid and 0.1-g-dry-cells/g-butyric acid for acetogenesis and 0.1 g-dry-cells/g-acetic acid for methanogenesis. The model describes both the transient and the steady-state regime for several different biodigester design and operating conditions. After model experimental validation, a parametric analysis was performed. It was found that biogas production is strongly dependent on the input polymeric substrate and fermentable monomer concentrations, but fairly independent of the input propionic, acetic and butyric acid concentrations. An optimisation study was then conducted and optimal residence time and substrate inlet mass flow rate were found for maximum methane production. The optima found were very sharp, showing a sudden drop of methane mass flow rate variation from the observed maximum to zero, within a 20% range around the optimal operating parameters, which stresses the importance of their identification, no matter how complex the actual bioreactor design may be. The model is therefore expected to be a useful tool for simulation, design, control and

  15. Optimization of Remediation Conditions using Vadose Zone Monitoring Technology

    Dahan, O.; Mandelbaum, R.; Ronen, Z.

    2010-12-01

    Success of in-situ bio-remediation of the vadose zone depends mainly on the ability to change and control hydrological, physical and chemical conditions of subsurface. These manipulations enables the development of specific, indigenous, pollutants degrading bacteria or set the environmental conditions for seeded bacteria. As such, the remediation efficiency is dependent on the ability to implement optimal hydraulic and chemical conditions in deep sections of the vadose zone. Enhanced bioremediation of the vadose zone is achieved under field conditions through infiltration of water enriched with chemical additives. Yet, water percolation and solute transport in unsaturated conditions is a complex process and application of water with specific chemical conditions near land surface dose not necessarily result in promoting of desired chemical and hydraulic conditions in deeper sections of the vadose zone. A newly developed vadose-zone monitoring system (VMS) allows continuous monitoring of the hydrological and chemical properties of the percolating water along deep sections of the vadose zone. Implementation of the VMS at sites that undergoes active remediation provides real time information on the chemical and hydrological conditions in the vadose zone as the remediation process progresses. Manipulating subsurface conditions for optimal biodegradation of hydrocarbons is demonstrated through enhanced bio-remediation of the vadose zone at a site that has been contaminated with gasoline products in Tel Aviv. The vadose zone at the site is composed of 6 m clay layer overlying a sandy formation extending to the water table at depth of 20 m bls. The upper 5 m of contaminated soil were removed for ex-situ treatment, and the remaining 15 m vadose zone is treated in-situ through enhanced bioremedaition. Underground drip irrigation system was installed below the surface on the bottom of the excavation. Oxygen and nutrients releasing powder (EHCO, Adventus) was spread below the

  16. MENENTUKAN PORTOFOLIO OPTIMAL MENGGUNAKAN MODEL CONDITIONAL MEAN VARIANCE

    I GEDE ERY NISCAHYANA

    2016-08-01

    Full Text Available When the returns of stock prices show the existence of autocorrelation and heteroscedasticity, then conditional mean variance models are suitable method to model the behavior of the stocks. In this thesis, the implementation of the conditional mean variance model to the autocorrelated and heteroscedastic return was discussed. The aim of this thesis was to assess the effect of the autocorrelated and heteroscedastic returns to the optimal solution of a portfolio. The margin of four stocks, Fortune Mate Indonesia Tbk (FMII.JK, Bank Permata Tbk (BNLI.JK, Suryamas Dutamakmur Tbk (SMDM.JK dan Semen Gresik Indonesia Tbk (SMGR.JK were estimated by GARCH(1,1 model with standard innovations following the standard normal distribution and the t-distribution.  The estimations were used to construct a portfolio. The portfolio optimal was found when the standard innovation used was t-distribution with the standard deviation of 1.4532 and the mean of 0.8023 consisting of 0.9429 (94% of FMII stock, 0.0473 (5% of  BNLI stock, 0% of SMDM stock, 1% of  SMGR stock.

  17. Media and growth conditions for induction of secondary metabolite production

    Frisvad, Jens Christian

    2012-01-01

    -defined media are suited for biochemical studies, but in order to get chemical diversity expressed in filamentous fungi, sources rich in amino acids, vitamins, and trace metals have to be added, such as yeast extract and oatmeal. A battery of solid agar media is recommended for exploration of chemical diversity...... as agar plug samples are easily analyzed to get an optimal representation of the qualitative secondary metabolome. Standard incubation for a week at 25°C in darkness is recommended, but optimal conditions have to be modified depending on the ecology and physiology of different filamentous fungi....

  18. Group search optimiser-based optimal bidding strategies with no Karush-Kuhn-Tucker optimality conditions

    Yadav, Naresh Kumar; Kumar, Mukesh; Gupta, S. K.

    2017-03-01

    General strategic bidding procedure has been formulated in the literature as a bi-level searching problem, in which the offer curve tends to minimise the market clearing function and to maximise the profit. Computationally, this is complex and hence, the researchers have adopted Karush-Kuhn-Tucker (KKT) optimality conditions to transform the model into a single-level maximisation problem. However, the profit maximisation problem with KKT optimality conditions poses great challenge to the classical optimisation algorithms. The problem has become more complex after the inclusion of transmission constraints. This paper simplifies the profit maximisation problem as a minimisation function, in which the transmission constraints, the operating limits and the ISO market clearing functions are considered with no KKT optimality conditions. The derived function is solved using group search optimiser (GSO), a robust population-based optimisation algorithm. Experimental investigation is carried out on IEEE 14 as well as IEEE 30 bus systems and the performance is compared against differential evolution-based strategic bidding, genetic algorithm-based strategic bidding and particle swarm optimisation-based strategic bidding methods. The simulation results demonstrate that the obtained profit maximisation through GSO-based bidding strategies is higher than the other three methods.

  19. Optimization of conditions for gene delivery system based on PEI

    Roya Cheraghi

    2017-01-01

    Full Text Available Objective(s: PEI based nanoparticle (NP due to dual capabilities of proton sponge and DNA binding is known as powerful tool for nucleic acid delivery to cells. However, serious cytotoxicity and complicated conditions, which govern NPs properties and its interactions with cells practically, hindered achievement to high transfection efficiency. Here, we have tried to optimize the properties of PEI/ firefly luciferase plasmid complexes and cellular condition to improve transfection efficiency. Materials and Methods: For this purpose, firefly luciferase, as a robust gene reporter, was complexed with PEI to prepare NPs with different size and charge. The physicochemical properties of nanoparticles were evaluated using agarose gel retardation and dynamic light scattering.  MCF7 and BT474 cells at different confluency were also transfected with prepared nanoparticles at various concentrations for short and long times. Results: The branched PEI can instantaneously bind to DNA and form cationic NPs. The results demonstrated the production of nanoparticles with size about 100-500 nm dependent on N/P ratio. Moreover, increase of nanoparticles concentration on the cell surface drastically improved the transfection rate, so at a concentration of 30 ng/ìl, the highest transfection efficiency was achieved. On the other side, at confluency between 40-60%, the maximum efficiency was obtained. The result demonstrated that N/P ratio of 12 could establish an optimized ratio between transfection efficiency and cytotoxicity of PEI/plasmid nanoparticles. The increase of NPs N/P ratio led to significant cytotoxicity. Conclusion: Obtained results verified the optimum conditions for PEI based gene delivery in different cell lines.

  20. Effect of torrefaction conditions on greenhouse crop residue: Optimization of conditions to upgrade solid characteristics.

    Iáñez-Rodríguez, Irene; Martín-Lara, María Ángeles; Blázquez, Gabriel; Pérez, Antonio; Calero, Mónica

    2017-11-01

    This work investigated the possibility of using a greenhouse crop waste as a fuel, since it is an abundant residue in the Mediterranean area of Spain. The residue is mainly composed by biomass with a little quantity of plastic. The physical and chemical characteristics of the biomass were determined by elemental analysis, proximate analysis, FT-IR, FE-SEM and thermogravimetry. Additionally, a torrefaction process was carried out as a pre-treatment to improve the energy properties of the biomass material. The optimal conditions (time and temperature) of torrefaction were found to be 263°C and 15min using the gain and loss method. Further studies were carried out with the sample prepared with the nearest conditions to the optimal in order to determine the effect of the plastic fraction in the characteristics and torrefaction process of the waste studied. Copyright © 2017 Elsevier Ltd. All rights reserved.

  1. Optimizing Patient Management and Adherence for Children Receiving Growth Hormone.

    Acerini, Carlo L; Wac, Katarzyna; Bang, Peter; Lehwalder, Dagmar

    2017-01-01

    Poor adherence with growth hormone (GH) therapy has been associated with worse clinical outcomes, which in children relates specifically to their linear growth and loss of quality of life. The "360° GH in Europe" meeting, held in Lisbon, Portugal, in June 2016 and funded by Merck KGaA (Germany), examined many aspects of GH diseases. The three sessions, entitled " Short Stature Diagnosis and Referral ," " Optimizing Patient Management ," and " Managing Transition ," each benefited from three guest speaker presentations, followed by an open discussion and are reported as a manuscript, authored by the speakers. Reported here is a summary of the proceedings of the second session, which reviewed the determinants of GH therapy response, factors affecting GH therapy adherence and the development of innovative technologies to improve GH treatment in children. Response to GH therapy varies widely, particularly in regard to the underlying diagnosis, although there is little consensus on the definition of a poor response. If the growth response is seen to be less than expected, the possible reasons should be discussed with patients and their parents, including compliance with the therapy regimen. Understanding and addressing the multiple factors that influence adherence, in order to optimize GH therapy, requires a multi-disciplinary approach. Because therapy continues over many years, various healthcare professionals will be involved at different periods of the patient's journey. The role of the injection device for GH therapy, frequent monitoring of response, and patient support are all important for maintaining adherence. New injection devices are incorporating electronic technologies for automated monitoring and recording of clinically relevant information on injections. Study results are indicating that such devices can at least maintain GH adherence; however, acceptance of novel devices needs to be assessed and there remains an on-going need for innovations.

  2. Optimizing Patient Management and Adherence for Children Receiving Growth Hormone

    Carlo L. Acerini

    2017-11-01

    Full Text Available Poor adherence with growth hormone (GH therapy has been associated with worse clinical outcomes, which in children relates specifically to their linear growth and loss of quality of life. The “360° GH in Europe” meeting, held in Lisbon, Portugal, in June 2016 and funded by Merck KGaA (Germany, examined many aspects of GH diseases. The three sessions, entitled “Short Stature Diagnosis and Referral,” “Optimizing Patient Management,” and “Managing Transition,” each benefited from three guest speaker presentations, followed by an open discussion and are reported as a manuscript, authored by the speakers. Reported here is a summary of the proceedings of the second session, which reviewed the determinants of GH therapy response, factors affecting GH therapy adherence and the development of innovative technologies to improve GH treatment in children. Response to GH therapy varies widely, particularly in regard to the underlying diagnosis, although there is little consensus on the definition of a poor response. If the growth response is seen to be less than expected, the possible reasons should be discussed with patients and their parents, including compliance with the therapy regimen. Understanding and addressing the multiple factors that influence adherence, in order to optimize GH therapy, requires a multi-disciplinary approach. Because therapy continues over many years, various healthcare professionals will be involved at different periods of the patient’s journey. The role of the injection device for GH therapy, frequent monitoring of response, and patient support are all important for maintaining adherence. New injection devices are incorporating electronic technologies for automated monitoring and recording of clinically relevant information on injections. Study results are indicating that such devices can at least maintain GH adherence; however, acceptance of novel devices needs to be assessed and there remains an on

  3. Growth conditions of 0-group plaice Pleuronectes platessa in the western Wadden Sea as revealed by otolith microstructure analysis

    Cardoso, Joana F. M. F.; Freitas, Vânia; de Paoli, Hélène; Witte, Johannes IJ.; van der Veer, Henk W.

    2016-05-01

    Growth studies based on population-based growth estimates are limited by the fact that they do not take into account differences in age/size structure within the population. To overcome these problems, otolith microstructure analysis is often used to estimate individual growth. Here, we analyse growth of 0-group plaice in the western Wadden Sea in two years: a year preceded by a mild winter (1995) and a year preceded by a severe winter (1996). Growth was analysed by combining information on individual growth based on otolith analysis with predictions of maximum growth (= under optimal food conditions) based on a Dynamic Energy Budget model. Otolith analysis revealed that settlement occurred earlier in 1995 than in 1996. In both years, one main cohort was found, followed by a group of late settlers. No differences in mean length-at-age were found between these groups. DEB modelling suggested that growth was not maximal during the whole growing season: realized growth (the fraction of maximum growth realized by 0-group plaice) declined in the summer, although this decline was relatively small. In addition, late settling individuals exhibited lower realized growth than individuals from the main cohort. This study confirms that growth conditions for 0-group plaice are not optimal and that a growth reduction occurs in summer, as suggested in previous studies.

  4. Emergence of robust growth laws from optimal regulation of ribosome synthesis.

    Scott, Matthew; Klumpp, Stefan; Mateescu, Eduard M; Hwa, Terence

    2014-08-22

    Bacteria must constantly adapt their growth to changes in nutrient availability; yet despite large-scale changes in protein expression associated with sensing, adaptation, and processing different environmental nutrients, simple growth laws connect the ribosome abundance and the growth rate. Here, we investigate the origin of these growth laws by analyzing the features of ribosomal regulation that coordinate proteome-wide expression changes with cell growth in a variety of nutrient conditions in the model organism Escherichia coli. We identify supply-driven feedforward activation of ribosomal protein synthesis as the key regulatory motif maximizing amino acid flux, and autonomously guiding a cell to achieve optimal growth in different environments. The growth laws emerge naturally from the robust regulatory strategy underlying growth rate control, irrespective of the details of the molecular implementation. The study highlights the interplay between phenomenological modeling and molecular mechanisms in uncovering fundamental operating constraints, with implications for endogenous and synthetic design of microorganisms. © 2014 The Authors. Published under the terms of the CC BY 4.0 license.

  5. Optimization of source pencil deployment based on plant growth simulation algorithm

    Yang Lei; Liu Yibao; Liu Yujuan

    2009-01-01

    A plant growth simulation algorithm was proposed for optimizing source pencil deployment for a 60 Co irradiator. A method used to evaluate the calculation results was presented with the objective function defined by relative standard deviation of the exposure rate at the reference points, and the method to transform two kinds of control variables, i.e., position coordinates x j and y j of source pencils in the source plaque, into proper integer variables was also analyzed and solved. The results show that the plant growth simulation algorithm, which possesses both random and directional search mechanism, has good global search ability and can be used conveniently. The results are affected a little by initial conditions, and improve the uniformity in the irradiation fields. It creates a dependable field for the optimization of source bars arrangement at irradiation facility. (authors)

  6. Optimization of fermentation conditions for ethanol production from whey

    Castillo, F J; Izaguirre, M F; Michelena, V; Moreno, B

    1982-01-01

    Optimal conditions for ethanol production in 7% whey solutions by the yeast Candida pseudotropicalis ATCC 8619 included an initial pH of 4.57 and 30 degrees. Complete fermentation of the available lactose took place without supplementary nutrients; additions of N and P salts, yeast extract, or corn steep liquor resulted in increased yeast production and lower ethanol yields. A possible correlation was observed between increases in yeast inocula and lactose utilization and ethanol production rates; 8.35 g ethanol/L was obtained within 22 hours by using a yeast inoculum of 13.9 g/L. No differences in fermentation rates or ethanol yields were observed when whole or deproteinized whey solutions were used. Concentrated whey permeates, obtained after removal of the valuable proteins from whey, can be effectively fermented for ethanol production.

  7. Methods of forecasting crack growth rate under creep conditions

    Ol'kin, S.I.

    1979-01-01

    Using construction aluminium alloy application possibility of linear mechanics of the destruction for quantitative description of crack development process under creepage conditions is investigated. It is shown, that the grade dependence between the stress intensity coefficient and the crack growth rate takes place only at certain combination of the sample geometry and creepage parameters, and consequently, its applicability in every given case must necessarily be tested experimentally

  8. Selective area growth of GaN rod structures by MOVPE: Dependence on growth conditions

    Li, Shunfeng; Fuendling, Soenke; Wang, Xue; Erenburg, Milena; Al-Suleiman, Mohamed Aid Mansur; Wei, Jiandong; Wehmann, Hergo-Heinrich; Waag, Andreas [Institut fuer Halbleitertechnik, TU Braunschweig, Hans-Sommer-Strasse 66, 38106 Braunschweig (Germany); Bergbauer, Werner [Institut fuer Halbleitertechnik, TU Braunschweig, Hans-Sommer-Strasse 66, 38106 Braunschweig (Germany); Osram Opto Semiconductors GmbH, Leibnizstr. 4, 93055 Regensburg (Germany); Strassburg, Martin [Osram Opto Semiconductors GmbH, Leibnizstr. 4, 93055 Regensburg (Germany)

    2011-07-15

    Selective area growth of GaN nanorods by metalorganic vapor phase epitaxy is highly demanding for novel applications in nano-optoelectronic and nanophotonics. Recently, we report the successful selective area growth of GaN nanorods in a continuous-flow mode. In this work, as examples, we show the morphology dependence of GaN rods with {mu}m or sub-{mu}m in diameters on growth conditions. Firstly, we found that the nitridation time is critical for the growth, with an optimum from 90 to 180 seconds. This leads to more homogeneous N-polar GaN rods growth. A higher temperature during GaN rod growth tends to increase the aspect ratio of the GaN rods. This is due to the enhanced surface diffusion of growth species. The V/III ratio is also an important parameter for the GaN rod growth. Its increase causes reduction of the aspect ratio of GaN rods, which could be explained by the relatively lower growth rate on (000-1) N-polar top surface than it on {l_brace}1-100{r_brace} m-planes by supplying more NH{sub 3} (copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  9. Optimal charge and color breaking conditions in the MSSM

    Le Moueel, C.

    2001-01-01

    In the MSSM, we make a careful tree-level study of charge and color breaking conditions in the plane (H 2 ,u-tilde L ,u-tilde R ), focusing on the top quark scalar case. A simple and fast procedure to compute the VEVs of the dangerous vacuum is presented and used to derive a model-independent optimal CCB bound on A t . This bound takes into account all possible deviations of the CCB vacuum from the D-flat directions. For large tanβ, it provides a CCB maximal mixing for the stop scalar fields t-tilde 1 ,t-tilde 2 , which automatically rules out the Higgs maximal mixing vertical bar A t vertical bar = √6 m t-tilde . As a result, strong limits on the stop mass spectrum and a reduction, in some cases substantial, of the one-loop upper bound on the CP-even lightest Higgs boson mass, m h , are obtained. To incorporate one-loop leading corrections, this tree-level CCB condition should be evaluated at an appropriate renormalization scale which proves to be the SUSY scale

  10. Scenario based optimization of a container vessel with respect to its projected operating conditions

    Wagner Jonas

    2014-06-01

    Full Text Available In this paper the scenario based optimization of the bulbous bow of the KRISO Container Ship (KCS is presented. The optimization of the parametrically modeled vessel is based on a statistically developed operational profile generated from noon-to-noon reports of a comparable 3600 TEU container vessel and specific development functions representing the growth of global economy during the vessels service time. In order to consider uncertainties, statistical fluctuations are added. An analysis of these data lead to a number of most probable upcoming operating conditions (OC the vessel will stay in the future. According to their respective likeliness an objective function for the evaluation of the optimal design variant of the vessel is derived and implemented within the parametrical optimization workbench FRIENDSHIP Framework. In the following this evaluation is done with respect to vessel’s calculated effective power based on the usage of potential flow code. The evaluation shows, that the usage of scenarios within the optimization process has a strong influence on the hull form.

  11. Scenario based optimization of a container vessel with respect to its projected operating conditions

    Jonas Wagner

    2014-06-01

    Full Text Available In this paper the scenario based optimization of the bulbous bow of the KRISO Container Ship (KCS is presented. The optimization of the parametrically modeled vessel is based on a statistically developed operational profile generated from noon-to-noon reports of a comparable 3600 TEU container vessel and specific development functions representing the growth of global economy during the vessels service time. In order to consider uncertainties, statistical fluctuations are added. An analysis of these data lead to a number of most probable upcoming operating conditions (OC the vessel will stay in the future. According to their respective likeliness an objective function for the evaluation of the optimal design variant of the vessel is derived and implemented within the parametrical optimization workbench FRIENDSHIP Framework. In the following this evaluation is done with respect to vessel's calculated effective power based on the usage of potential flow code. The evaluation shows, that the usage of scenarios within the optimization process has a strong influence on the hull form.

  12. Scenario based optimization of a container vessel with respect to its projected operating conditions

    Wagner, Jonas; Binkowski, Eva; Bronsart, Robert

    2014-06-01

    In this paper the scenario based optimization of the bulbous bow of the KRISO Container Ship (KCS) is presented. The optimization of the parametrically modeled vessel is based on a statistically developed operational profile generated from noon-to-noon reports of a comparable 3600 TEU container vessel and specific development functions representing the growth of global economy during the vessels service time. In order to consider uncertainties, statistical fluctuations are added. An analysis of these data lead to a number of most probable upcoming operating conditions (OC) the vessel will stay in the future. According to their respective likeliness an objective function for the evaluation of the optimal design variant of the vessel is derived and implemented within the parametrical optimization workbench FRIENDSHIP Framework. In the following this evaluation is done with respect to vessel's calculated effective power based on the usage of potential flow code. The evaluation shows, that the usage of scenarios within the optimization process has a strong influence on the hull form.

  13. Initial Conditions Corresponding to Optimal Ion Acceleration in the VINCY Cyclotron

    Ilic, A. Z.; Ristic-Djurovic, J. L.; Cirkovic, S. T.

    2007-01-01

    The quality of a beam in a cyclotron depends a lot on the choice of initial conditions for acceleration. The criteria defining optimal acceleration as well as the choice of the corresponding initial conditions have been outlined. The results of beam dynamics simulations with optimal and non-optimal initial conditions are compared. (author)

  14. Nutritional optimization for anaerobic growth of Bacillus steaothermophilus LLD-16

    Muhammad Javed

    2016-04-01

    Full Text Available In this study, a range of nutritional supplements including twenty amino acids, major vitamins and four nucleic acid bases were exploited as added-value supplements for the growth of a lactate-minus (ldh mutant Bacillus stearothermophilus LLD-16 under anaerobic environment. The chemostat studies revealed that five amino acids that includes aspartate, glutamate, isoleucine, methionine, and serine were essential for persuaded growth of B. stearothermophilus LLD-16. The anaerobic batch studies showed that a number of nutritional supplements, such as, p-aminobenzoic acid (PABA, folic acid, pantothenic acid, adenine, glycine, leucine, tryptophan, proline, alanine and α-ketoglutarate, when added individually, improved the biomass levels. In contrast, the higher concentrations of cyanocobalamine or biotin, guanine, uracil and isoleucine were found inhibitory. Furthermore, the study explains why the highest biomass formation cannot necessarily be achieved on the richest mixture of amino acids, and the inadequacy of the biosynthetic machinery is very much dependent on the growth conditions of the microorganism.

  15. Optimizing conditions for enzymatic extraction of sunflower oil

    Badr, F. H.

    1992-10-01

    Full Text Available Sunflower seed oil was extracted with an enzymatic processes using different hydrolytic enzymes: cellulase, hemicellulase, animal proteinase, acid proteinase, pectinase and pectinex, as compared to enzyme - free aqueous extraction. All the hydrolytic enzymes enhanced oil extraction from sunflower seeds. The most optimal conditions for oil extraction from sunflower seeds were: 2% enzyme concentration, 30% substrate concentration and 3 hrs period. Using Boganov and Buchkov equation showed that time must be prolonged to get higher yields. The maximum yield during 3 hrs extraction with enzymatic process ranged between 44,5%-57,1% of the soxhlet extractable oil. The potency of the investigated enzymes in extracting oil was in the following order: acid proteinase > cellulase > hemicellulase > animal proteinase > pectinex > pectinase when compared at the previous optimal conditions.

    Aceite de semilla de girasol fue extraído mediante un proceso enzimático usando diferentes enzimas hidrolíticos: celulasa, hemicelulasa, proteinasa animal, proteinasa acida, pectinasa y pectinex, comparando con la extracción acuosa libre de enzima. Todos los enzimas hidrolíticos incrementan la extracción de aceites de semilla de girasol. Las condiciones óptimas para la extracción de aceite a partir de semillas de girasol fueron: 2% de concentración de enzima, 30% de concentración de sustrato y un período de 3 horas. La ecuación de Boganov y Buchkov mostró que el tiempo debe ser prolongado para alcanzar altos rendimientos. El máximo rendimiento durante tres horas de extracción con proceso enzimático osciló entre el 44,5%-57,1% del aceite extraído con soxhlet. La potencia de los enzimas investigados en la extracción de aceite siguió el orden: proteinasa acida > celulasa > hemicelulasa > proteinasa animal > pectinex > pectinasa cuando fue previamente comparado con las condiciones óptimas.

  16. Forced sustained swimming exercise at optimal speed enhances growth of juvenile yellowtail kingfish (Seriola lalandi).

    Palstra, Arjan P; Mes, Daan; Kusters, Kasper; Roques, Jonathan A C; Flik, Gert; Kloet, Kees; Blonk, Robbert J W

    2014-01-01

    Swimming exercise at optimal speed may optimize growth performance of yellowtail kingfish in a recirculating aquaculture system. Therefore, optimal swimming speeds (U opt in m s(-1) or body lengths s(-1), BL s(-1)) were assessed and then applied to determine the effects of long-term forced and sustained swimming at U opt on growth performance of juvenile yellowtail kingfish. U opt was quantified in Blazka-type swim-tunnels for 145, 206, and 311 mm juveniles resulting in values of: (1) 0.70 m s(-1) or 4.83 BL s(-1), (2) 0.82 m s(-1) or 3.25 BL s(-1), and (3) 0.85 m s(-1) or 2.73 BL s(-1). Combined with literature data from larger fish, a relation of U opt (BL s(-1)) = 234.07(BL)(-0.779) (R (2) = 0.9909) was established for this species. Yellowtail kingfish, either forced to perform sustained swimming exercise at an optimal speed of 2.46 BL s(-1) ("swimmers") or allowed to perform spontaneous activity at low water flow ("resters") in a newly designed 3600 L oval flume (with flow created by an impeller driven by an electric motor), were then compared. At the start of the experiment, ten fish were sampled representing the initial condition. After 18 days, swimmers (n = 23) showed a 92% greater increase in BL and 46% greater increase in BW as compared to resters (n = 23). As both groups were fed equal rations, feed conversion ratio (FCR) for swimmers was 1.21 vs. 1.74 for resters. Doppler ultrasound imaging showed a statistically significant higher blood flow (31%) in the ventral aorta of swimmers vs. resters (44 ± 3 vs. 34 ± 3 mL min(-1), respectively, under anesthesia). Thus, growth performance can be rapidly improved by optimal swimming, without larger feed investments.

  17. Risk Informed Optimization of Nuclear Instrumentation for Emergency Conditions

    Knoll, Alexander

    2013-06-01

    Emergency conditions after a nuclear accident are different in each case and cannot be predicted accurately. The accident at TMI did not contaminate the environment. The accident at Chernobyl had a large, early release of nuclear contamination, widely dispersed over many countries. Although there was no large, early release of contamination at Fukushima Daiichi, the timeline of the accident included days of later contamination of various degrees of severity. A large amount of the contamination has been released to the ocean and an exclusion zone still exists around the station. In all of these accidents there were no adequate radiation monitoring systems distant from the origin point that could provide accurate status to the authorities and the local population. In the recent years a number of new nuclear monitoring systems have been implemented or are under development to be installed in areas that might be exposed to nuclear contamination in emergencies. Based on the risk informed optimization methodology, this paper provides recommendations for selecting the quantity and type of instrumentation, the location and sampling of data, and the real-time processing of information. (authors)

  18. Empowering leaders optimize working conditions for engagement: a multilevel study.

    Tuckey, Michelle R; Bakker, Arnold B; Dollard, Maureen F

    2012-01-01

    Using a multilevel framework, this study examined the role of empowering leadership at the group level by fire brigade captains in facilitating the individual level motivational processes that underpin work engagement in volunteer firefighters. Anonymous mail surveys were completed by 540 volunteer firefighters from 68 fire brigades and, separately, by 68 brigade captains. As predicted on the basis of the Job Demands-Resources model, increased levels of cognitive demands and cognitive resources partially mediated the relationship between empowering leadership and work engagement. In a three-way Leadership × Demands × Resources interaction, empowering leadership also had the effect of optimizing working conditions for engagement by strengthening the positive effect of a work context in which both cognitive demands and cognitive resources were high. Our findings shed light on a process through which leaders can empower workers and enhance well-being: via their influence on and interaction with the work environment. They also underscore the need to examine work engagement from a multilevel theoretical perspective.

  19. Statistically defining optimal conditions of coagulation time of skim milk

    Celebi, M.; Ozdemir, Z.O.; Eroglu, E.; Guney, I

    2014-01-01

    Milk consist huge amount of largely water and different proteins. Kappa-kazein of these milk proteins can be coagulated by Mucor miehei rennet enzyme, is an aspartic protease which cleavege 105 (phenly alanine)-106 (methionine) peptide bond. It is commonly used clotting milk proteins for cheese production in dairy industry. The aim of this study to measure milk clotting times of skim milk by using Mucor Miehei rennet and determination of optimal conditions of milk clotting time by mathematical modelling. In this research, milk clotting times of skim milk were measured at different pHs (3.0, 4.0, 5.0, 6.0, 7.0, 8.0) and temperatures (20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75 degree C). It was used statistical approach for defining best pH and temperature for milk clotting time of skim milk. Milk clotting activity was increase at acidic pHs and high temperatures. (author)

  20. Minimization for conditional simulation: Relationship to optimal transport

    Oliver, Dean S.

    2014-05-01

    In this paper, we consider the problem of generating independent samples from a conditional distribution when independent samples from the prior distribution are available. Although there are exact methods for sampling from the posterior (e.g. Markov chain Monte Carlo or acceptance/rejection), these methods tend to be computationally demanding when evaluation of the likelihood function is expensive, as it is for most geoscience applications. As an alternative, in this paper we discuss deterministic mappings of variables distributed according to the prior to variables distributed according to the posterior. Although any deterministic mappings might be equally useful, we will focus our discussion on a class of algorithms that obtain implicit mappings by minimization of a cost function that includes measures of data mismatch and model variable mismatch. Algorithms of this type include quasi-linear estimation, randomized maximum likelihood, perturbed observation ensemble Kalman filter, and ensemble of perturbed analyses (4D-Var). When the prior pdf is Gaussian and the observation operators are linear, we show that these minimization-based simulation methods solve an optimal transport problem with a nonstandard cost function. When the observation operators are nonlinear, however, the mapping of variables from the prior to the posterior obtained from those methods is only approximate. Errors arise from neglect of the Jacobian determinant of the transformation and from the possibility of discontinuous mappings.

  1. Growth optimization and electronic structure of ultrathin CoO films on Ag(001): A LEED and photoemission study

    Barman, Sukanta; Menon, Krishnakumar S. R.

    2018-04-01

    We present here a detailed growth optimization of CoO thin film on Ag(001) involving the effects of different growth parameters on the electronic structure. A well-ordered stoichiometric growth of 5 ML CoO film has been observed at 473 K substrate temperature and 1 × 10-6 mbar oxygen partial pressure. The growth at lower substrate temperature and oxygen partial pressure show non-stoichiometric impurity phases which have been investigated further to correlate the growth parameters with surface electronic structure. The coverage dependent valence band electronic structure of the films grown at optimized condition reveals the presence of interfacial states near the Fermi edge (EF) for lower film coverages. Presence of interfacial states in the stoichiometric films rules out their defect-induced origin. We argue that this is an intrinsic feature of transition metal monoxides like NiO, CoO, MnO in the low coverage regime.

  2. Optimization of mooseer (A. hirtifolium Boiss.) dehydration under infrared conditions.

    Chayjan, Reza Amiri; Fealekari, Mosayeb

    2017-01-01

    In recent years, infrared drying has gained popularity as an alternative drying method for a va- riety of agricultural products. The use of infrared radiation technology in drying agricultural products has several advantages. These may include decreased drying time, high energy efficiency, high-quality finished products and uniform temperature in the product. With intermittent infrared and convection heating of a thick porous material, the drying time can be reduced compared to convection alone, while keeping good food quality and high energy efficiency. Response surface methodology (RSM) was employed to optimize the drying con- ditions of mooseer under infrared-convective drying. Experiments were performed at air temperatures of  40, 55 and 70°C, infrared powers of 500, 1000 and 1500 W, air velocities of 0.5, 1.5 and 2.5 m/s and slice thicknesses of 2, 4, and 6 mm. In this study, effective moisture diffusivity (Deff), shrinkage, color changes and specific energy consumption (SEC) were investigated. The central composite design (CCD) was selected for the design and optimization of the process. Deff was obtained between 1.4×10 and 3.57×10    m /s. With increasing air temperature and slice –10                                  –9       2 thickness, Deff also increased. The level of shrinkage rose as slice thickness increased. The highest and lowest values of color changes were calculated at air temperatures of 70°C (52.3%) and 40°C (5.65%), respectively. Increasing air velocity led to an increase in SEC. Optimum conditions for mooseer drying were achieved at air temperature of 70°C, infrared power of 867.46, air velocity of 0.59 m/s and slice thickness of 2 mm. At this point, Deff, shrinkage, color changes and SEC was obtained as 1.32×10–9 m2/s, 29.58%, 17.62% and 4.64 MJ/kg, respectively. The desir- ability value of 0.689 was achieved for the drying process.  .

  3. A simplified counter diffusion method combined with a 1D simulation program for optimizing crystallization conditions.

    Tanaka, Hiroaki; Inaka, Koji; Sugiyama, Shigeru; Takahashi, Sachiko; Sano, Satoshi; Sato, Masaru; Yoshitomi, Susumu

    2004-01-01

    We developed a new protein crystallization method has been developed using a simplified counter-diffusion method for optimizing crystallization condition. It is composed of only a single capillary, the gel in the silicon tube and the screw-top test tube, which are readily available in the laboratory. The one capillary can continuously scan a wide range of crystallization conditions (combination of the concentrations of the precipitant and the protein) unless crystallization occurs, which means that it corresponds to many drops in the vapor-diffusion method. The amount of the precipitant and the protein solutions can be much less than in conventional methods. In this study, lysozyme and alpha-amylase were used as model proteins for demonstrating the efficiency of this method. In addition, one-dimensional (1-D) simulations of the crystal growth were performed based on the 1-D diffusion model. The optimized conditions can be applied to the initial crystallization conditions for both other counter-diffusion methods with the Granada Crystallization Box (GCB) and for the vapor-diffusion method after some modification.

  4. Optimization of operating conditions of distillation columns: an energy saving option in refinery industry

    Alireza Fazlali

    2010-01-01

    Full Text Available While energy prices continue to climb, it conservation remains the prime concern for process industries. The daily growth of energy consumption throughout the world and the real necessity of providing it, shows that optimization of energy generation and consumption units is an economical and sometimes vital case. Hence, the optimization of a petroleum refinery is aimed towards great production and an increase in quality. In this research, the atmospheric distillation unit of the Iran-Arak-Shazand petroleum refinery was subject to optimization efforts. It was performed by the means of using a simulator with the aim to earn more overhead products. In the next step the optimization results from the simulators were carried out in the real world, at the above mentioned unit. Results demonstrate that the changes in the real operating conditions increase the overhead products with desirable quality. Finally, a net economical balance between the increments of the overhead products and the energy consumption shows an energy saving in this refinery.

  5. Optimization of Water Allocation between Different Crops in Water Stress Conditions in Qazvin Irrigation Network

    Mehdi Mohammad khani

    2017-06-01

    Full Text Available Introduction: Evaluations show the necessity of using optimization models in order to determine optimal allocation of water in different water conditions. Its use can be proposed according to developed model abilities in this study in order to optimize water productivity and provide sustainable management and development of water resources over irrigation and drainage networks. Basic needs of the earth growing population and limitation of water and soil resources remindnecessity of optimal use of resources. World’s more than 280 million hectare lands are covered by irrigation networks (Khalkhali et al., 2006. The efficiency of most projects is between 30-50 percent and studies show that performance of most irrigation and drainage networks is not desirable and they have not achieved their aims. Hirich et al. (2014 Used deficit irrigation to improve crop water productivity of sweet corn, chickpea, faba bean and quinoa. For all crops, the highest water productivity and yield were obtained when deficit irrigation was applied during the vegetative growth stage. During the second season 2011 two cultivars of quinoa, faba bean and sweet corn have been cultivated applying 6 deficit irrigation treatments (rainfed, 0, 25, 50, 75 and 100% of full irrigation only during the vegetative growth stage, while in the rest of a crop cycle full irrigation was provided except for rainfed treatment. For quinoa and faba bean, treatment receiving 50% of the full irrigation during the vegetative growth stage recorded the highest yield and water productivity, while for sweet corn applying 75% of full irrigation was the optimal treatment in terms of yield and water productivity. Moghaddasi et al. (2010 worked examines and compares this approach with that based on the optimization method to manage agricultural water demand during drought to minimize damage. The results show that the optimization method resulted in 42% more income for the agricultural sector using the

  6. Growth of microbial mixed cultures under anaerobic, alkaline conditions

    Wenk, M.

    1993-09-01

    Cement and concrete are the most important engineered barrier materials in a repository for low- and intermediate-level waste and thus represent the most significant component of the total disposal inventory. Based on the chemical composition of the concrete used in the repository and the groundwater fluxes in the modelled host rock, it is to be expected that the pH in the near vicinity of the repository could exceed a value of 10.5 for more than a million years. The groundwater in the repository environment also has a limited carbon concentration. Since microorganisms will be present in a repository and can even find suitable living conditions within the waste itself, investigations were carried out in order to establish the extent to which microbial activity is possible under the extreme conditions of the repository near-field. For the investigations, alkalophilic cultures were enriched from samples from alkaline habitats and from Valanginian Marl. Anaerobic bacteria with fermentative, sulfate-reducing and methanogenic metabolism were selected. The growth and activity of the mixed cultures were studied under alkaline conditions and the dependence on pH and carbon concentration determined. All the mixed cultures investigated are alkalophilic. The optimum growth range for the cultures is between pH 9.0 and pH 10.0. The activity limit for the fermentative mixed culture is at pH 12, for the sulfate-reducers at pH 11 and for the methanogens at pH 10.5. Given the limited supply of carbon, the mixed cultures can only grow under slightly alkaline conditions. Only the fermentative cultures are capable of surviving with limited carbon supply at pH 13. (author) 24 figs., 18 tabs., 101 refs

  7. Simulation of fatigue crack growth under large scale yielding conditions

    Schweizer, Christoph; Seifert, Thomas; Riedel, Hermann

    2010-07-01

    A simple mechanism based model for fatigue crack growth assumes a linear correlation between the cyclic crack-tip opening displacement (ΔCTOD) and the crack growth increment (da/dN). The objective of this work is to compare analytical estimates of ΔCTOD with results of numerical calculations under large scale yielding conditions and to verify the physical basis of the model by comparing the predicted and the measured evolution of the crack length in a 10%-chromium-steel. The material is described by a rate independent cyclic plasticity model with power-law hardening and Masing behavior. During the tension-going part of the cycle, nodes at the crack-tip are released such that the crack growth increment corresponds approximately to the crack-tip opening. The finite element analysis performed in ABAQUS is continued for so many cycles until a stabilized value of ΔCTOD is reached. The analytical model contains an interpolation formula for the J-integral, which is generalized to account for cyclic loading and crack closure. Both simulated and estimated ΔCTOD are reasonably consistent. The predicted crack length evolution is found to be in good agreement with the behavior of microcracks observed in a 10%-chromium steel.

  8. Growth conditions determine the DNF2 requirement for symbiosis.

    Fathi Berrabah

    Full Text Available Rhizobia and legumes are able to interact in a symbiotic way leading to the development of root nodules. Within nodules, rhizobia fix nitrogen for the benefit of the plant. These interactions are efficient because spectacularly high densities of nitrogen fixing rhizobia are maintained in the plant cells. DNF2, a Medicago truncatula gene has been described as required for nitrogen fixation, bacteroid's persistence and to prevent defense-like reactions in the nodules. This manuscript shows that a Rhizobium mutant unable to differentiate is not sufficient to trigger defense-like reactions in this organ. Furthermore, we show that the requirement of DNF2 for effective symbiosis can be overcome by permissive growth conditions. The dnf2 knockout mutants grown in vitro on agarose or Phytagel as gelling agents are able to produce nodules fixing nitrogen with the same efficiency as the wild-type. However, when agarose medium is supplemented with the plant defense elicitor ulvan, the dnf2 mutant recovers the fix- phenotype. Together, our data show that plant growth conditions impact the gene requirement for symbiotic nitrogen fixation and suggest that they influence the symbiotic suppression of defense reactions in nodules.

  9. Growth, development and productivity of Jerusalem artichoke depending on plant stand in the conditions of the Republic of Karakalpakstan

    Zhangabaeva A.S.

    2017-08-01

    Full Text Available the article presents the results of studying the influence of various schemes of planting seed tubers of Jerusalem artichoke on the rate of plant growth and development in the soil and climatic conditions of the Republic of Karakalpakstan. Differences in the rate of growth and development of plants are revealed, depending on the varietal features of Jerusalem artichoke and the density of their standing. The most optimal scheme for planting tubers of Jerusalem artichoke is 70x40 cm.

  10. Veld condition and animal performance: application of an optimal ...

    Keywords: Diet choices; Food ingestion; Foraging models; Grassland conditions; Herbivores; animal performance; animal production; diet choice; digestion rate; grazing; needs; quality; veld condition score; condition; performance; grassland; production; foraging; model; food; ingestion; digestion; food preferences; food ...

  11. Effects of growth conditions on thermal profiles during Czochralski silicon crystal growth

    Choe, Kwang Su; Stefani, Jerry A.; Dettling, Theodore B.; Tien, John K.; Wallace, John P.

    1991-01-01

    An eddy current testing method was used to continuously monitor crystal growth process and investigate the effects of growth conditions on thermal profiles during Czochralski silicon crystal growth. The experimental concept was to monitor the intrinsic electrical conductivities of the growing crystal and deduce temperature values from them. In terms of the experiments, the effects of changes in growth parameters, which include the crystal and crucible rotation rates, crucible position, and pull rate, and hot-zone geometries were investigated. The results show that the crystal thermal profile could shift significantly as a function of crystal length if the closed-loop control fails to maintain a constant thermal condition. As a direct evidence to the effects of the melt flow on heat transfer processes, a thermal gradient minimum was observed when the crystal/crucible rotation combination was 20/-10 rpm cw. The thermal gradients in the crystal near the growth interface were reduced most by decreasing the pull rate or by reducing the radiant heat loss to the environment; a nearly constant axial thermal gradient was achieved when either the pull rate was decreased by half, the height of the exposed crucible wall was doubled, or a radiation shield was placed around the crystal. Under these conditions, the average axial thermal gradient along the surface of the crystal was about 4-5°C/mm. When compared to theoretical results found in literature, the axial profiles correlated well with the results of the models which included radiant interactions. However, the radial gradients estimated from three-frequency data were much higher than what were predicted by known theoretical models. This discrepancy seems to indicate that optical phenomenon within the crystal is significant and should be included in theoretical modeling.

  12. Growth optimization for thick crack-free GaN layers on sapphire with HVPE

    Richter, E.; Hennig, Ch.; Kissel, H.; Sonia, G.; Zeimer, U.; Weyers, M. [Ferdinand-Braun-Institut fuer Hoechstfrequenztechnik, 12489 Berlin (Germany)

    2005-05-01

    Conditions for optimized growth of thick GaN layers with crack-free surfaces by HVPE are reported. It was found that a 1:1 mixture of H{sub 2}/N{sub 2} as carrier gas leads to the lowest density of cracks in the surface. Crack formation also depends on the properties of the GaN/sapphire templates used. Best results have been obtained for 5 {mu}m thick GaN/sapphire templates grown by MOVPE with medium compressive strain {epsilon}{sub zz} of about 0.05%. But there is no simple dependence of the crack formation on the strain status of the starting layer indicating that the HVPE growth of GaN can itself introduce strong tensile strain. (copyright 2005 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  13. Novel approach for optimization of fermentative condition for ...

    Jane

    2011-07-20

    Jul 20, 2011 ... School of Biochemical Engineering, Institute of Technology, Banaras Hindu University ... been applied for the optimization of a few biochemical ..... Methanol by Methylo bacterium Extorquens DSMZ. 1340. Iran J. Chem. Chem.

  14. Screening of Lactic Acid Bacteria for Anti-Fusarium Activity and Optimization of Incubation Conditions.

    Zhao, Hui; Vegi, Anuradha; Wolf-Hall, Charlene

    2017-10-01

    Anti-Fusarium activities of lactic acid bacteria (LAB) Lactobacillus plantarum 299V, L. plantarum NRRL-4496, and Lactobacillus rhamnosus VT1 were determined by a microdilution assay developed in this study against Fusarium graminearum 08/RG/BF/51. A cell-free Lactobacillus culture supernatant (CFLCS) of L. rhamnosus VT1 had the highest anti-Fusarium activity. Response surface methodology was used to optimize the incubation conditions for production of CFLCS. A Box-Behnken factorial design was used to investigate the effects of incubation time, shaking speed, and incubation temperature on the inhibition rate of CFLCS. A model equation was generated to predict the inhibition rate of CFLCS under various incubation conditions. A low probability value (0.0012) and associated F value of 25.10 suggested that the model was highly significant. A high R 2 value (0.978) indicated a very satisfactory model performance. Response surface methodology analysis suggested that an incubation temperature at 34°C, a shaking speed at 170 rpm, and an incubation time of 55 h were the best combination for production of CFLCS from L. rhamnosus VT1. Under these incubation conditions, a 10% L. rhamnosus VT1 CFLCS solution was predicted to inhibit the growth of F. graminearum by 75.6% in vitro and inhibited 83.7% of the growth in the validation experiment. Thus, the CFLCS of L. rhamnosus VT1 was an effective anti-Fusarium mixture.

  15. Optimization of tactical decisions: subjective and objective conditionality

    Олег Юрійович Булулуков

    2016-06-01

    Full Text Available In the article «human» and «objective» factors are investigated that influencing on optimization of tactical decisions. Attention is accented on dependence of the got information about the circumstances of crime from the acceptance of correct decisions an investigator. Connection between efficiency of investigation and acceptance of optimal tactical decisions is underlined. The declared problem is not investigational in literature in a sufficient measure. Its separate aspects found the reflection in works: D. А. Solodova, S. Yu. Yakushina and others. Some questions related to optimization of investigation and making decision an investigator we discover in works: R. S. Belkin, V. А. Juravel, V. Е. Konovalova, V. L. Sinchuk, B. V. Shur, V. Yu. Shepitko. The aim of the article is determination of term «optimization», as it applies to tactical decisions in criminalistics, and also consideration of influence of human and objective factors on the acceptance of optimal decisions at investigation of crimes. In the article etymology of term is considered «optimization» and interpretation of its is given as it applies to the acceptance of tactical decisions. The types of mark human and objective factors, stipulating optimization of tactical decisions. The last assists efficiency of tactics of investigation of crimes. At consideration of «human factors» of influencing on optimization decisions, attention applies on «psychological traps» can take place at making decision. Among them such are named, as: anchoring; status quo; irreversible expenses; desired and actual; incorrect formulation; conceit; reinsurance; constancy of memory. Underlined, absence of unambiguity in the brought list over of «objective factors» influencing at choice tactical decision. The different understanding of «tactical risk» is argued, as a factor influencing on an acceptance tactical decisions. The analysis of «human» and «objective» factors influencing on

  16. Optimization of processing parameters on the controlled growth of c-axis oriented ZnO nanorod arrays

    Malek, M. F., E-mail: mfmalek07@gmail.com; Rusop, M., E-mail: rusop@salam.uitm.my [NANO-ElecTronic Centre (NET), Faculty of Electrical Engineering, Universiti Teknologi MARA (UiTM), 40450 Shah Alam, Selangor (Malaysia); NANO-SciTech Centre (NST), Institute of Science (IOS), Universiti Teknologi MARA - UiTM, 40450 Shah Alam, Selangor (Malaysia); Mamat, M. H., E-mail: hafiz-030@yahoo.com [NANO-ElecTronic Centre (NET), Faculty of Electrical Engineering, Universiti Teknologi MARA (UiTM), 40450 Shah Alam, Selangor (Malaysia); Musa, M. Z., E-mail: musa948@gmail.com [NANO-ElecTronic Centre (NET), Faculty of Electrical Engineering, Universiti Teknologi MARA (UiTM), 40450 Shah Alam, Selangor (Malaysia); Faculty of Electrical Engineering, Universiti Teknologi MARA (UiTM) Pulau Pinang, Jalan Permatang Pauh, 13500 Permatang Pauh, Pulau Pinang (Malaysia); Saurdi, I., E-mail: saurdy788@gmail.com; Ishak, A., E-mail: ishak@sarawak.uitm.edu.my [NANO-ElecTronic Centre (NET), Faculty of Electrical Engineering, Universiti Teknologi MARA (UiTM), 40450 Shah Alam, Selangor (Malaysia); Faculty of Electrical Engineering, Universiti Teknologi MARA (UiTM) Sarawak, Kampus Kota Samarahan, Jalan Meranek, 94300 Kota Samarahan, Sarawak (Malaysia); Alrokayan, Salman A. H., E-mail: dr.salman@alrokayan.com; Khan, Haseeb A., E-mail: khan-haseeb@yahoo.com [Chair of Targeting and Treatment of Cancer Using Nanoparticles, Deanship of Scientific Research, King Saud University (KSU), Riyadh 11451 (Saudi Arabia)

    2016-07-06

    Optimization of the growth time parameter was conducted to synthesize high-quality c-axis ZnO nanorod arrays. The effects of the parameter on the crystal growth and properties were systematically investigated. Our studies confirmed that the growth time influence the properties of ZnO nanorods where the crystallite size of the structures was increased at higher deposition time. Field emission scanning electron microsope analysis confirmed the morphologies structure of the ZnO nanorods. The ZnO nanostructures prepared under the optimized growth conditions showed an intense XRD peak which reveal a higher c-axis oriented ZnO nanorod arrays thus demonstrating the formation of defect free structure.

  17. The onset condition of equatorial plasma bubbles - the role of seeding mechanism and growth condition

    Kil, H.; Choi, J. M.; Kwak, Y. S.; Lee, W. K.; Park, J.

    2015-12-01

    We investigate the role of seeding mechanism and growth condition of perturbations in the creation of equatorial plasma bubbles by analyzing the C/NOFS and ROCSAT-1 satellite observations. The initial development times of bubbles were identified by manual processing of the data, and the periodic characteristics in the occurrence of bubbles were investigated using periodograms obtained from segments of bubble chains. Our preliminary results show that bubbles initiate at the time that the pre-reversal enhancement (PRE) ends. This time corresponds to the time that the F region reaches the highest altitude where the growth rate of the Rayleigh-Taylor (R-T) instability is large. The initial onset time of bubbles varies with season and longitude in accordance with the variation of the PRE ending time. Our investigation of the periodicity in the occurrence of bubbles (spacing between bubbles) shows that a dominant periodicity does not exist; the spacing between bubbles ranges from 100 km to over 1000 km. A pronounced periodicity occurs in some series of bubbles, but, in general, multiple periodicity co-exists. The initiation of bubbles at a specific local time but the absence of a preferential wave property in the occurrence of bubbles lead to the conclusion that the onset of bubbles is controlled by the growth condition of the R-T instability.

  18. Forced sustained swimming exercise at optimal speed enhances growth of juvenile yellowtail kingfish (Seriola lalandi)

    Palstra, A.P.; Mes, D.; Kusters, K.; Roques, J.A.C.; Flik, G.; Kloet, K.; Blonk, R.J.W.

    2015-01-01

    Swimming exercise at optimal speed may optimize growth performance of yellowtail kingfish in a recirculating aquaculture system. Therefore, optimal swimming speeds (U-opt in m s(-1) or body lengths s(-1), BL s(-1)) were assessed and then applied to determine the effects of long-term forced and

  19. Optimal Operational Monetary Policy Rules in an Endogenous Growth Model: a calibrated analysis

    Arato, Hiroki

    2009-01-01

    This paper constructs an endogenous growth New Keynesian model and considers growth and welfare effect of Taylor-type (operational) monetary policy rules. The Ramsey equilibrium and optimal operational monetary policy rule is also computed. In the calibrated model, the Ramseyoptimal volatility of inflation rate is smaller than that in standard exogenous growth New Keynesian model with physical capital accumulation. Optimal operational monetary policy rule makes nominal interest rate respond s...

  20. Growth patterns for etiolated soybeans germinated under spaceflight conditions

    Levine, Howard G.; Piastuch, William C.

    In the GENEX (GENe EXpression) spaceflight experiment (flown on STS-87), six surface sterilized soybean seeds ( Glycine max cv McCall) were inserted into each of 32 autoclaved plastic seed growth pouches containing an inner germination paper sleeve (for a total of 192 seeds). The pouches were stowed within a mid-deck locker until Mission Flight Day 10, at which time an astronaut added water to initiate the process of seed germination on-orbit and subsequently transferred them to four light-tight aluminum canisters called BRIC-60s (Biological Research In Canisters). We report here on the morphological characteristics of: (1) the recovered flight plants ( N = 177), (2) the corresponding ground control population ( N = 183), plus (3) additional controls grown on the ground under clinostat conditions ( N = 93). No significant morphological differences were found between the flight, ground control and clinorotated treatments for either the cotyledons or hypocotyls. There were, however, significantly longer primary roots produced in the flight population relative to the ground control population, which in turn had significantly longer primary roots than the clinorotated population. This same pattern was observed relative to the production of lateral roots (flight > control > clinorotated). Taken together with previous literature reports, we believe that there is now sufficient evidence to conclude that plants grown under conditions of microgravity will generally exhibit enhanced root production relative to their ground control counterparts. Some causes underlying this phenomenon are speculated on.

  1. Optimization of in vitro culture and transfection condition of bovine ...

    The present study aimed to optimize the in vitro culture and transfection efficiency of bovine primary spermatogonial stem cells (SSCs). To this end, SSCs were obtained from newborn Holstein bull calves by two-step enzymatic digestion. After enrichment and culture, SSCs were characterized by using alkaline phosphatase ...

  2. Optimization of biomass-producing conditions of Micrococcus sp. S ...

    Then these three variables were optimized by Box-behnken experimental design and response surface methodology, and a multinomial equation was constructed to describe the correlation between the biomass production and the three tested variables. By solving to this equation, the predicted maximum biomass was ...

  3. Response surface optimization of the process conditions for anti ...

    GREGORY

    2011-12-16

    Dec 16, 2011 ... These two phenolic acids are already known to have anti-diabetic properties from previous study. ... Key words: Anti-diabetic, Cucumis sativus, β-glucosidase inhibitor, optimization, phenolic acids. .... concentration of 0.022 unit/ml solution. ..... antioxidant properties (Srivastava et al., 2009). ... acids in beer.

  4. Growth Optimization of Lactobacillus plantarum T5jq301796.1, an Iranian Indigenous Probiotic in Lab Scale Fermenter

    Faranak Noori

    2016-07-01

    Full Text Available Background and Objective: Lactobacillus plantarum is one of the probiotics species used in functional food products. These bacteria or their purified bacteriocins are used as biological preservatives in the food industry. The first step in production of an array of probiotic products is optimizing production in fermentors. This study aimed to examine factors affecting the in vitro growth optimization of Lactobacillus plantarum T5JQ301796.1 in a lab scale fermentor.Materials and Methods: Following 24 hours of anaerobic culture of the lactobacillus at 37°C, the pre-culture was ready and was inoculated to a 5 liter fermentor at 37°C and stirred at 40 rpm. Then factors affecting lactobacillus growth including carbon and nitrogen sources and pH were studied. The results were interpreted using response surface methodology (RSM, and optimal conditions for the equipment were determined.Results and Conclusion: For optimal growth of Lactobacillus plantarum T5JQ301796.1 in lab scale fermentor, the optimal conditions were 25.96 gl-1 of glucose, 1.82% of yeast extract, pH of 7.26, and stirring at 40 rpm at optimum temperature between 37-40°C. In this condition, maximum viable cell in the batch fermentation was 1.25×1010 CFU ml-1. Application of central composite design for the growth optimization of this bacterium led to maximum viable cells equal to 1.25×1010 CFU ml-1. So the mentioned features can lead to optimum industrial scale production and usage of this probiotic strain in probiotic products.Conflict of interest: The authors declare that there is no conflict of interest.

  5. The optimal condition of performing MTT assay for the determination of radiation sensitivity

    Hong, Semie; Kim, Il Han

    2001-01-01

    The measurement of radiation survival using a clonogenic assay, the established standard, can be difficult and time consuming. In this study, We have used the MTT assay, based on the reduction of a tetrazolium salt to a purple formazan precipitate by living cells, as a substitution for clonogenic assay and have examined the optimal condition for performing this assay in determination of radiation sensitivity. Four human cancer cell lines - PCI-1, SNU-1066, NCI-H63O and RKO cells have been used. For each cell line, a clonogenic assay and a MTT assay using Premix WST-1 solution, which is one of the tetrazolium salts and does not require washing or solubilization of the precipitate were carried out after irradiation of 0, 2, 4, 6, 8, 10 Gy, For clonogenic assay, cells in 25 cm 2 flasks were irradiated after overnight incubation and the resultant colonies containing more than 50 cells were scored after culturing the cells for 10-14 days, For MTT assay, the relationship between absorbance and cell number, optimal seeding cell number, and optimal timing of assay was determined. Then, MTT assay was performed when the irradiated cells had regained exponential growth or when the non-irradiated cells had undergone four or more doubling times. There was minimal variation in the values gained from these two methods with the standard deviation generally less than 5%, and there were no statistically significant differences between two methods according to t-test in low radiation dose (below 6 Gy). The regression analyses showed high linear correlation with the R 2 value of 0.975-0.992 between data from the two different methods. The optimal cell numbers for MTT assay were found to be dependent on plating efficiency of used cell line. Less than 300 cells/well were appropriate for cells with high plating efficiency (more than 30%). For cells with low plating efficiency (less than 30%), 500 cells/well or more were appropriate for assay. The optimal time for MTT assay was alter 6

  6. Optimized conditions for high-level solubilization and purification of ...

    NH Computers

    2011-10-10

    Oct 10, 2011 ... filtration chromatography using Sephadex G-50 column. The purified protein was refolded by .... blocking with BSA, the nitrocellulose membrane was processed using rabbit monoclonal antibody raised ..... recombinant human growth hormone using radial flow chromatography. Protein Exp. Purif., 68: 54-59.

  7. Optimized conditions for high-level solubilization and purification of ...

    In this report, we describe the cloning, over-expression, efficient solubilization, purification and evaluation of bioactivity of camel growth hormone (cGH). The total cellular RNA was extracted from pituitary glands of freshly slaughtered animals and cDNA of cGH was synthesized by a pair of sequence specific primers with a ...

  8. Improving growth performance in calves under hot weather conditions

    Emara, S.S.M.

    2009-01-01

    The main objectives of the present study were to evaluate the effect of some supplement such as dried live yeast DLY (Saccharomyces cerevisiae), DLY + vitamin E and / or dried whey milk (DWM) on blood constituents and thyroid activity in relation to some immune indices and growth performance of calves under hot weather conditions. The ambient temperature and relative humidity averaged 36.9±4 degree C and 43-58 % during day and 29±4 degree C and 60-68 % during night, respectively, which were equivalent to temperature humidity index of 86-89 during day and 78-80 during night . The present study included three experiments as follows. Experiment 1 : Six female bovine Baladi calves of 8-10 months old and 100 kg initial body weight (IBW) were used during two periods. In the first period, the calves were offered the basal diet for one month and considered as a control period. In the second period, the same calves were fed the same basal diet which supplemented with 15 g / calf/ day DLY for one month and considered as treated period. The obtained results indicated that supplementation of DLY reduced significantly the respiration rate (RR) and rectal temperature (RT) as well as serum lipids profile including total cholesterol, low density lipoprotein (LDL- cholesterol) very low density lipoprotein (VLDL-cholesterol) triglycerides and phospholipids.The second and third experiments were carried out for improving growth performance of heat-stressed bovine baladi calves by adding DLY and vitamine E (alpha-tocopherol) to their diet in experiment 2 and dried whey milk (DWM) in experiment 3.

  9. Growth-Prediction Model for Blue Mussels (Mytilus edulis on Future Optimally Thinned Farm-Ropes in Great Belt (Denmark

    Poul S. Larsen

    2016-07-01

    Full Text Available A recently developed BioEnergetic Growth (BEG model for blue mussels (Mytilus edulis, valid for juvenile mussels, has been further developed to an ‘extended model’ and an alternative ‘ad hoc BEG model’ valid for post-metamorphic mussels, where the latter accounts for changing ambient chl a concentration. It was used to predict the growth of M. edulis on optimally thinned farm-ropes in Great Belt (Denmark, from newly settled post-metamorphic mussels of an initial shell size of 0.8 mm to marketable juvenile 30–35 mm ‘mini-mussels’. Such mussels will presumably in the near future be introduced as a new Danish, smaller-sized consumer product. Field data for actual growth (from Day 0 = 14 June 2011 showed that size of ‘mini-mussel’ was reached on Day 109 (Oct 1 and length 38 mm on Day 178 (Dec 9 while the corresponding predictions using the extended model were Day 121 (Oct 13 and Day 159 (Nov 20. Similar results were obtained by use of the ad hoc BEG model which also demonstrated the sensitivity of growth prediction to levels of chl a concentration, but less to temperature. The results suggest that it is possible (when the conditions are optimal, i.e., no intraspecific competition ensured by sufficient thinning to produce ‘mini-mussels’ in Great Belt during one season, but not the usual marketable 45-mm mussels. We suggest that the prediction model may be used as a practical instrument to evaluate to what degree the actual growth of mussels on farm ropes due to intraspecific competition may deviate from the potential (optimal growth under specified chl a and temperature conditions, and this implies that the effect of thinning to optimize the individual growth by eliminating intraspecific competition can be rationally evaluated.

  10. Optimal Bail Out Policy, Conditionality and Creative Ambiguity

    Xavier Freixas

    1999-01-01

    This paper addresses the issue of the optimal behaviour of the Lender of Last Resort (LOLR) in its microeconomic role regarding individual financial institutions in distress. It has been argued that the LOLR should not intervene at the microeconomic level and let any defaulting institution face the market discipline, as it will be confronted with the consequences of the risks it has taken. By considering a simple cost benefit analysis we show that this position my lack a sufficient foundation...

  11. Optimal bail out policy, conditionality and constructive ambiguity

    Freixas, Xavier

    1999-01-01

    This paper addresses the issue of the optimal behaviour of the Lender of Last Resort (LOLR) in its microeconomic role regarding individual financial institutions in distress. It has been argued that the LOLR should not intervene at the microeconomic level and let any defaulting institution face the market discipline, as it will be confronted with the consequences of the risks it has taken. By considering a simple cost benefit analysis we show that this position may lac...

  12. Optimal Bail-Out, Conditionality and Creative Ambiguity

    Freixas, Xavier

    1999-01-01

    This paper addresses the issue of the optimal behaviour of the Lender of Last Resort (LOLR) in its microeconomic role regarding individual financial institutions in distress. It has been argued that the LOLR should not intervene at the microeconomic level and let any defaulting institution face the market discipline, as it will be confronted with the consequences of the risks it has taken. By considering a simple cost benefit analysis we show that this position may lack a sufficient foundatio...

  13. Impacts of Plant Growth-Promoting Rhizobacteria-based Biostimulants on Wheat Growth under Greenhouse and Field Conditions

    Nguyen, Minh; Ongena, Marc; Colinet, Gilles; Vandenbol, Micheline; Spaepen, Stijn; Bodson, Bernard; Jijakli, Haissam; du Jardin, Patrick; Delaplace, Pierre

    2015-01-01

    Plant Growth-Promoting Rhizobacteria (PGPR) are one of the main biostimulant classes due to their capacity of stimulating root growth and enhancing soil mineral availability, hence increasing nutrient use efficiency in crops. The aim of this study is to screen commercially PGPR-containing products to enhance wheat growth and yield in combination with an optimized nitrogen (N) fertilizer application scheme. This could lead to a significant reduction of N fertilizer application without affectin...

  14. Magnetic manipulation device for the optimization of cell processing conditions.

    Ito, Hiroshi; Kato, Ryuji; Ino, Kosuke; Honda, Hiroyuki

    2010-02-01

    Variability in human cell phenotypes make it's advancements in optimized cell processing necessary for personalized cell therapy. Here we propose a strategy of palm-top sized device to assist physically manipulating cells for optimizing cell preparations. For the design of such a device, we combined two conventional approaches: multi-well plate formatting and magnetic cell handling using magnetite cationic liposomes (MCLs). From our previous works, we showed the labeling applications of MCL on adhesive cells for various tissue engineering approaches. To feasibly transfer cells in multi-well plate, we here evaluated the magnetic response of MCL-labeled suspension type cells. The cell handling performance of Jurkat cells proved to be faster and more robust compared to MACS (Magnetic Cell Sorting) bead methods. To further confirm our strategy, prototype palm-top sized device "magnetic manipulation device (MMD)" was designed. In the device, the actual cell transportation efficacy of Jurkat cells was satisfying. Moreover, as a model of the most distributed clinical cell processing, primary peripheral blood mononuclear cells (PBMCs) from different volunteers were evaluated. By MMD, individual PBMCs indicated to have optimum Interleukin-2 (IL-2) concentrations for the expansion. Such huge differences of individual cells indicated that MMD, our proposing efficient and self-contained support tool, could assist the feasible and cost-effective optimization of cell processing in clinical facilities. Copyright (c) 2009 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

  15. Optimization of functionalization conditions for protein analysis by AFM

    Arroyo-Hernández, María, E-mail: maria.arroyo@ctb.upm.es [Centro de Tecnología Biomédica, Universidad Politécnica de Madrid, 28223 Pozuelo de Alarcón, Madrid (Spain); Departamento de Ciencia de Materiales, ETSI Caminos, Canales y Puertos, Universidad Politécnica de Madrid, 28040 Madrid (Spain); Daza, Rafael; Pérez-Rigueiro, Jose; Elices, Manuel; Nieto-Márquez, Jorge; Guinea, Gustavo V. [Centro de Tecnología Biomédica, Universidad Politécnica de Madrid, 28223 Pozuelo de Alarcón, Madrid (Spain); Departamento de Ciencia de Materiales, ETSI Caminos, Canales y Puertos, Universidad Politécnica de Madrid, 28040 Madrid (Spain)

    2014-10-30

    Highlights: • Highest fluorescence is obtained for central conditions. • Largest primary amine contribution is obtained for central conditions. • RMS roughness is smaller than 1 nm for all functional films. • Selected deposition conditions lead to proper RMS and functionality values. • LDH proteins adsorbed on AVS-films were observed by AFM. - Abstract: Activated vapor silanization (AVS) is used to functionalize silicon surfaces through deposition of amine-containing thin films. AVS combines vapor silanization and chemical vapor deposition techniques and allows the properties of the functionalized layers (thickness, amine concentration and topography) to be controlled by tuning the deposition conditions. An accurate characterization is performed to correlate the deposition conditions and functional-film properties. In particular, it is shown that smooth surfaces with a sufficient surface density of amine groups may be obtained with this technique. These surfaces are suitable for the study of proteins with atomic force microscopy.

  16. Effect of cultivation conditions on growth and antifungal activity of ...

    Administrator

    Growth and production of antifungal agent by Mycena leptocephala was investigated in different culture media composition at various initial pH and temperatures. Maximum growth and activity was observed at the initial pH of 5.5 and 25oC. No detectable growth and activity was observed at pH of 3.5 and 7.5. Growth of the ...

  17. Stress-Related Growth in Two Challenging Conditions

    Šolcová, Iva; Tavel, P.

    2017-01-01

    Roč. 13, č. 1 (2017), č. článku 4. ISSN 1529-5168 Institutional support: RVO:68081740 Keywords : Mars-500 * cruise * personal growth * spirituality, cognitive growth * social growth Subject RIV: AN - Psychology OBOR OECD: Psychology (including human - machine relations)

  18. Optimality Conditions for Nondifferentiable Multiobjective Semi-Infinite Programming Problems

    D. Barilla

    2016-01-01

    Full Text Available We have considered a multiobjective semi-infinite programming problem with a feasible set defined by inequality constraints. First we studied a Fritz-John type necessary condition. Then, we introduced two constraint qualifications and derive the weak and strong Karush-Kuhn-Tucker (KKT in brief types necessary conditions for an efficient solution of the considered problem. Finally an extension of a Caristi-Ferrara-Stefanescu result for the (Φ,ρ-invexity is proved, and some sufficient conditions are presented under this weak assumption. All results are given in terms of Clark subdifferential.

  19. Forced sustained swimming exercise at optimal speed enhances growth of juvenile yellowtail kingfish (Seriola lalandi

    Arjan P. Palstra

    2015-01-01

    Full Text Available Swimming exercise at optimal speed may optimize growth performance of yellowtail kingfish in a recirculating aquaculture system. Therefore, optimal swimming speeds (Uopt in m s-1 or body lengths s-1, BL s-1 were assessed and then applied to determine the effects of long-term forced and sustained swimming at Uopt on growth performance of juvenile yellowtail kingfish. Uopt was quantified in Blazka-type swim-tunnels for 145 mm, 206 mm and 311 mm juveniles resulting in values of: 1 0.70 m s-1 or 4.83 BL s-1, 2 0.82 m s-1 or 3.25 BL s-1 and 3 0.85 m s-1 or 2.73 BL s-1. Combined with literature data from larger fish, a relation of Uopt (BL s-1 = 234.07(BL-0.779 (R2= 0.9909 was established for this species. Yellowtail kingfish, either forced to perform sustained swimming exercise at an optimal speed of 2.46 BL s-1 (‘swimmers’ or allowed to perform spontaneous activity at low water flow (‘resters’ in a newly designed 3,600 L oval flume (with flow created by an impeller driven by an electric motor, were then compared. At the start of the experiment, ten fish were sampled representing the initial condition. After 18 days, swimmers (n= 23 showed a 92% greater increase in BL and 46% greater increase in BW as compared to resters (n= 23. As both groups were fed equal rations, feed conversion ratio (FCR for swimmers was 1.21 vs. 1.74 for resters. Doppler ultrasound imaging showed a statistically significant higher blood flow (31% in the ventral aorta of swimmers vs. resters (44 ± 3 mL min-1 vs. 34 ± 3 mL min-1, respectively, under anesthesia. Thus growth performance can be rapidly improved by optimal swimming, without larger feed investments.

  20. Optimization of the purification methods for recovery of recombinant growth hormone from Paralichthys olivaceus

    Zang, Xiaonan; Zhang, Xuecheng; Mu, Xiaosheng; Liu, Bin

    2013-03-01

    This study aimed to optimize the purification of recombinant growth hormone from Paralichthys olivaceus. Recombinant flounder growth hormone (r-fGH) was expressed by Escherichia coli in form of inclusion body or as soluble protein under different inducing conditions. The inclusion body was renatured using two recovery methods, i.e., dilution and dialysis. Thereafter, the refolded protein was purified by Glutathione Sepharase 4B affinity chromatography and r-fGH was obtained by cleavage of thrombin. For soluble products, r-fGH was directly purified from the lysates by Glutathione Sepharase 4B affinity chromatography. ELISA-receptor assay demonstrated that despite its low receptor binding activity, the r-fGH purified from refolded inclusion body had a higher yield (2.605 mg L-1) than that from soluble protein (1.964 mg L-1). Of the tested recovery methods, addition of renaturing buffer (pH 8.5) into denatured inclusion body yielded the best recovery rate (17.9%). This work provided an optimized purification method for high recovery of r-fGH, thus contributing to the application of r-fGH to aquaculture.

  1. Optimization Of PVDF-TrFE Processing Conditions For The Fabrication Of Organic MEMS Resonators.

    Ducrot, Pierre-Henri; Dufour, Isabelle; Ayela, Cédric

    2016-01-21

    This paper reports a systematic optimization of processing conditions of PVDF-TrFE piezoelectric thin films, used as integrated transducers in organic MEMS resonators. Indeed, despite data on electromechanical properties of PVDF found in the literature, optimized processing conditions that lead to these properties remain only partially described. In this work, a rigorous optimization of parameters enabling state-of-the-art piezoelectric properties of PVDF-TrFE thin films has been performed via the evaluation of the actuation performance of MEMS resonators. Conditions such as annealing duration, poling field and poling duration have been optimized and repeatability of the process has been demonstrated.

  2. Air conditioning with methane: Efficiency and economics optimization parameters

    Mastrullo, R.; Sasso, M.; Sibilio, S.; Vanoli, R.

    1992-01-01

    This paper presents an efficiency and economics evaluation method for methane fired cooling systems. Focus is on direct flame two staged absorption systems and alternative engine driven compressor sets. Comparisons are made with conventional vapour compression plants powered by electricity supplied by the national grid. A first and second law based thermodynamics analysis is made in which fuel use coefficients and exergy yields are determined. The economics analysis establishes annual energy savings, unit cooling energy production costs, payback periods and economics/efficiency optimization curves useful for preliminary feasibility studies

  3. Selection of optimal conditions for preparation of emulsified fuel fluids

    Ivanov, V. A.; Berg, V. I.; Frolov, M. D.

    2018-05-01

    The aim of the article is to derive the optimal concept of physical and chemical effects, and its application to the production of water-fuel emulsions. The authors set a research task to attempt to estimate the influence of the surfactant concentration on such indicator as the time before the beginning of emulsion breaking. The analysis, based on experimental data, showed that an increase in the concentration of sodium lauryl sulfate is expedient to a certain point, corresponding to 0.05% of the total mass fraction. The main advantage of the model is a rational combination of methods of physical and chemical treatment used in the production of emulsions.

  4. Homogeneity and heterogeneity in amylase production by Bacillus subtilis under different growth conditions.

    Ploss, Tina N; Reilman, Ewoud; Monteferrante, Carmine G; Denham, Emma L; Piersma, Sjouke; Lingner, Anja; Vehmaanperä, Jari; Lorenz, Patrick; van Dijl, Jan Maarten

    2016-03-29

    Bacillus subtilis is an important cell factory for the biotechnological industry due to its ability to secrete commercially relevant proteins in large amounts directly into the growth medium. However, hyper-secretion of proteins, such as α-amylases, leads to induction of the secretion stress-responsive CssR-CssS regulatory system, resulting in up-regulation of the HtrA and HtrB proteases. These proteases degrade misfolded proteins secreted via the Sec pathway, resulting in a loss of product. The aim of this study was to investigate the secretion stress response in B. subtilis 168 cells overproducing the industrially relevant α-amylase AmyM from Geobacillus stearothermophilus, which was expressed from the strong promoter P(amyQ)-M. Here we show that activity of the htrB promoter as induced by overproduction of AmyM was "noisy", which is indicative for heterogeneous activation of the secretion stress pathway. Plasmids were constructed to allow real-time analysis of P(amyQ)-M promoter activity and AmyM production by, respectively, transcriptional and out-of-frame translationally coupled fusions with gfpmut3. Our results show the emergence of distinct sub-populations of high- and low-level AmyM-producing cells, reflecting heterogeneity in the activity of P(amyQ)-M. This most likely explains the heterogeneous secretion stress response. Importantly, more homogenous cell populations with regard to P(amyQ)-M activity were observed for the B. subtilis mutant strain 168degUhy32, and the wild-type strain 168 under optimized growth conditions. Expression heterogeneity of secretory proteins in B. subtilis can be suppressed by degU mutation and optimized growth conditions. Further, the out-of-frame translational fusion of a gene for a secreted target protein and gfp represents a versatile tool for real-time monitoring of protein production and opens novel avenues for Bacillus production strain improvement.

  5. Optimal control of the process of cultivation in the conditions of infection

    N. V. Sukhanova

    2016-01-01

    Full Text Available The article presents a way of solving of the optimal control problem of antibiotic feeding under condition of infection, consisting in the selection of the optimal control in the field of admissible control, with the aim of achieving a compromise between the losses in production due to the presence of foreign microflora, and the cost of its suppression due to the application of antibiotic. The presence of other microorganisms in the finished product, in particular of the “wild“ ones, considerably impairs the quality indicators of the final product (in particular, it reduces the storage time. In peculiar conditions of production it is possible to improve the quality of target product due to elimination of infection, including, when used antibiotics in the process of cultivation, but due to the lack of efficient algorithms and control systems of their supply the question is still open. We use the system of Lotka-Volterra adapted for microbiological process as a mathematical model adequately describing the situation of competitive interaction of two populations of microorganisms (useful and “wild“ ones due to the consumption of one resource. The aim is to find a control law U(t belonging to the field of admissible control. The control that affords minimum to the optimization criterion in accordance with the principle of maximum is defined by the condition of the maximum of Hamilton function and the resulting canonical system of equations. The modified conjugated system of equations in matrix form is obtained. The solution of system of differential-different equations in the analytical form is found using the method of coordinate transformation. As a result an optimal control law is found (with regard to the selected criterion. This is the control law of application of the antibiotic, allowing to control the concentration of foreign microflora in the process of cultivation of microorganisms and accounting for the specific

  6. The Optimal Level and Impact of Internal Factors on Growth

    Li, Kui-Wai

    2011-01-01

    This paper empirically uses data from the world economy to show that performance of domestic factors are equally important to external factors when comes to growth. Various external and domestic factors are used to construct two separate indices and the principal component method is applied in the analysis. The empirical results show that given a different level of performance in the economy’s external factors, a higher performance in the internal factors will produce a higher growth rate....

  7. Optimization of radiation safety conditions in radon laboratories

    Kibal'nik, S.P.; Koroleva, T.M.

    1990-01-01

    The study was aimed at studying working conditions of personnel, engaged in production and supply of radon solution in medical and prophylactic institutions of the Kaliningrad region for the period 1962-1988. Data on examinations carried out at radon laboratories during this period by radiological group of the Kaliningrad sanitary epidemiological station were used as a basis for the study. Positive dynamics of indicators of radiation safety of the persons working at these objects is indicated, concrete measures and ways for improving working conditions of the personnel and role of sanitary epidemiological service in solving these problems are shown. 2 refs.; 1 tab

  8. Power systems control complex optimization in the new market conditions

    Krumm, L.; Kurrel, U.; Tauts, A.; Terno, O.; Zeidmanis, I.; Krisans, Z.

    2000-01-01

    A generalization and development of the theory and methods for complex optimisation of the performance and development control of an interconnected system (IPS) under new market conditions (mainly multicriterial and game approaches) is given considering the specifics of IPS at the international level in post-socialist countries and in particular in the Baltic states. Thereby the kernel of the mathematical apparatus of this theory the Generalized Reduced Gradient Method (GRGM) is further generalised and developed with the application of multicriterial and game methods to meet various market conditions. (author)

  9. Optimization of the caldasite processing conditions by alcaline melting

    Brown, A.E.P.

    1976-01-01

    A study has been done to recover economically the uranium and zirconium values of the ores at Pocos de Caldas Plateau in the state of Minas Gerais, Brazil. In a preliminar study, it was investigated the opening of the ore by alcaline fusion that were carried out in a temperature controlled furnace and the variables studied were the time, temperature and NaOH/ore ratio. The optimization procedure was based on the steepest Ascent Method developed by Box and Wilson, utilizing a complete 2 3 factorial design. The analysis of the data indicated the response optimum for the process in: time 1.52 +-0.1 hour; temperature 805 +-15degC; NaOH/ore ratio 1.7 ton/ton. Solubilizations higher than 97%ZrO 2 and recuperations nearly of 100%U 3 O 8 are obtained arouns this point [pt

  10. Optimal Combustion Conditions for a Small-scale Biomass Boiler

    Viktor Plaček

    2012-01-01

    Full Text Available This paper reports on an attempt to achieve maximum efficiency and lowest possible emissions for a small-scale biomass boiler. This aim can be attained only by changing the control algorithm of the boiler, and in this way not raising the acquisition costs for the boiler. This paper describes the experimental facility, the problems that arose while establishing the facility, and how we have dealt with them. The focus is on discontinuities arising after periodic grate sweeping, and on finding the parameters of the PID control loops. Alongside these methods, which need a lambda probe signal for proper functionality, we inroduce another method, which is able to intercept the optimal combustion working point without the need to use a lambda sensor.

  11. Optimization of culture conditions of Streptomyces rochei (MTCC ...

    Fermentation and culture conditions were studied in shaken-flask culture to induce the production of greater amounts of antimicrobial metabolites by Streptomyces rochei (10109). Antimicrobial metabolite production started after 48 h incubation and reached its optimum level at 20% inoculum size at 120 h, at which point the ...

  12. Optimizing access to conditions data in ATLAS event data processing

    Rinaldi, Lorenzo; The ATLAS collaboration

    2018-01-01

    The processing of ATLAS event data requires access to conditions data which is stored in database systems. This data includes, for example alignment, calibration, and configuration information that may be characterized by large volumes, diverse content, and/or information which evolves over time as refinements are made in those conditions. Additional layers of complexity are added by the need to provide this information across the world-wide ATLAS computing grid and the sheer number of simultaneously executing processes on the grid, each demanding a unique set of conditions to proceed. Distributing this data to all the processes that require it in an efficient manner has proven to be an increasing challenge with the growing needs and number of event-wise tasks. In this presentation, we briefly describe the systems in which we have collected information about the use of conditions in event data processing. We then proceed to explain how this information has been used to refine not only reconstruction software ...

  13. Placental growth factor expression is reversed by antivascular endothelial growth factor therapy under hypoxic conditions.

    Zhou, Ai-Yi; Bai, Yu-Jing; Zhao, Min; Yu, Wen-Zhen; Huang, Lv-Zhen; Li, Xiao-Xin

    2014-08-01

    Clinical trials have revealed that the antivascular endothelial growth factor (VEGF) therapies are effective in retinopathy of prematurity (ROP). But the low level of VEGF was necessary as a survival signal in healthy conditions, and endogenous placental growth factor (PIGF) is redundant for development. The purpose of this study was to elucidate the PIGF expression under hypoxia as well as the influence of anti-VEGF therapy on PIGF. CoCl2-induced hypoxic human umbilical vein endothelial cells (HUVECs) were used for an in vitro study, and oxygen-induced retinopathy (OIR) mice models were used for an in vivo study. The expression patterns of PIGF under hypoxic conditions and the influence of anti-VEGF therapy on PIGF were evaluated by quantitative reverse transcription-polymerase chain reaction (RTPCR). The retinal avascular areas and neovascularization (NV) areas of anti-VEGF, anti-PIGF and combination treatments were calculated. Retina PIGF concentration was evaluated by ELISA after treatment. The vasoactive effects of exogenous PIGF on HUVECs were investigated by proliferation and migration studies. PIGF mRNA expression was reduced by hypoxia in OIR mice, in HUVECs under hypoxia and anti-VEGF treatment. However, PIGF expression was reversed by anti-VEGF therapy in the OIR model and in HUVECs under hypoxia. Exogenous PIGF significantly inhibited HUVECs proliferation and migration under normal conditions, but it stimulated cell proliferation and migration under hypoxia. Anti-PIGF treatment was effective for neovascular tufts in OIR mice (P<0.05). The finding that PIGF expression is iatrogenically up-regulated by anti-VEGF therapy provides a consideration to combine it with anti-PIGF therapy.

  14. Optimizing Pt/TiO2 templates for textured PZT growth and MEMS devices

    Potrepka, Daniel; Fox, Glenn; Sanchez, Luz; Polcawich, Ronald

    2013-03-01

    Crystallographic texture of lead zirconate titanate (PZT) thin films strongly influences piezoelectric properties used in MEMS applications. Textured growth can be achieved by relying on crystal growth habit and can also be initiated by the use of a seed-layer heteroepitaxial template. Template choice and the process used to form it determine structural quality, ultimately influencing performance and reliability of MEMS PZT devices such as switches, filters, and actuators. This study focuses on how 111-textured PZT is generated by a combination of crystal habit and templating mechanisms that occur in the PZT/bottom-electrode stack. The sequence begins with 0001-textured Ti deposited on thermally grown SiO2 on a Si wafer. The Ti is converted to 100-textured TiO2 (rutile) through thermal oxidation. Then 111-textured Pt can be grown to act as a template for 111-textured PZT. Ti and Pt are deposited by DC magnetron sputtering. TiO2 and Pt film textures and structure were optimized by variation of sputtering deposition times, temperatures and power levels, and post-deposition anneal conditions. The relationship between Ti, TiO2, and Pt texture and their impact on PZT growth will be presented. Also affiliated with U.S. Army Research Lab, Adelphi, MD 20783, USA

  15. Peroxisomal catalase deficiency modulates yeast lifespan depending on growth conditions

    Kawalek, Adam; Lefevre, Sophie D.; Veenhuis, Marten; van der Klei, Ida J.

    We studied the role of peroxisomal catalase in chronological aging of the yeast Hansenula polymorpha in relation to various growth substrates. Catalase-deficient (cat) cells showed a similar chronological life span (CLS) relative to the wild-type control upon growth on carbon and nitrogen sources

  16. Biologic phosphorus elimination - influencing parameters, boundary conditions, process optimation

    Dai Xiaohu.

    1992-01-01

    This paper first presents a systematic study of the basic process of biologic phosphorus elimination as employed by the original 'Phoredox (Main Stream) Process'. The conditions governing the process and the factors influencing its performance were determined by trial operation. A stationary model was developed for the purpose of modelling biologic phosphorus elimination in such a main stream process and optimising the dimensioning. The validity of the model was confirmed by operational data given in the literature and by operational data from the authors' own semitechnical-scale experimental plant. The model permits simulation of the values to be expected for effluent phosphorus and phosphate concentrations for given influent data and boundary conditions. It is thus possible to dimension a plant for accomodation of the original Phoredox (Main Stream) Process or any similar phosphorus eliminating plant that is to work according to the principle of the main stream process. (orig./EF) [de

  17. Inverse Problems and Data Fusion for crop production applications targeting optimal growth - Fertilization

    Kaur, Bipjeet; Owusu, Robert K. A.

    2015-01-01

    of the crop growth process based on information on soil quality, field seeding, spraying/fertilization and environmental information in general. Finally, references to software tools, which could form the basis for an open source platform for a planning and monitoring system for optimal crop growth......, such that the crop yield is optimized with respect to several parameters (e.g. high end user value and minimum environmental impact), thus obtaining a sustainable production. The growth process optimization is based on information, including sensor based measurements with sensor quality monitoring, from previous......This work in progress is a contribution to crop growth systems for planning and monitoring of farm activities and practices by farmers. The work outlines the initial findings related to modelling, simulation and visualization techniques for crop growth, specifically targeting the barley crop...

  18. Lettuce growth and quality optimization in a plant factory

    Nicole, C.C.S.; Charalambous, F.; Martinakos, S.; De Voort, Van S.; Li, Z.; Verhoog, M.; Krijn, M.

    2016-01-01

    Since the early 2000s, plant factory (or vertical farm) technology has been introduced for growing vegetables and soft fruits. With a well-controlled environment, new health benefits, food safety, optimized nutrients and increased shelf-life can be offered to consumers. With the progress of light

  19. Optimizing patient management and adherence for children receiving growth hormone

    Acerini, Carlo L.; Wac, Katarzyna; Bang, Peter

    2017-01-01

    © 2017 Acerini, Wac, Bang and Lehwalder. Poor adherence with growth hormone (GH) therapy has been associated with worse clinical outcomes, which in children relates specifically to their linear growth and loss of quality of life. The "360° GH in Europe" meeting, held in Lisbon, Portugal, in June...... and are reported as a manuscript, authored by the speakers. Reported here is a summary of the proceedings of the second session, which reviewed the determinants of GH therapy response, factors affecting GH therapy adherence and the development of innovative technologies to improve GH treatment in children....... Response to GH therapy varies widely, particularly in regard to the underlying diagnosis, although there is little consensus on the definition of a poor response. If the growth response is seen to be less than expected, the possible reasons should be discussed with patients and their parents, including...

  20. Glucose metabolism in Lactococcus lactis MG1363 under different aeration conditions: Requirement of acetate to sustain growth under microaerobic conditions

    Nordkvist, Mikkel; Jensen, N.B.S.; Villadsen, John

    2003-01-01

    Lactococcus lactis subsp. lactis MG1363 was grown in batch cultures on a defined medium with glucose as the energy source under different aeration conditions, namely, anaerobic conditions, aerobic conditions, and microaerobic conditions with a dissolved oxygen tension of 5% (when saturation...... resulted in acetate, CO2, and acetoin replacing formate and ethanol as end products. Under microaerobic conditions, growth came to a gradual halt, although more than 60% of the glucose was still left. A decline in growth was not observed during microaerobic cultivation when acetate was added to the medium...

  1. Social communication in mice--are there optimal cage conditions?

    Allain-Thibeault Ferhat

    Full Text Available Social communication is heavily affected in patients with neuropsychiatric disorders. Accordingly, mouse models designed to study the mechanisms leading to these disorders are tested for this phenotypic trait. Test conditions vary between different models, and the effect of these test conditions on the quantity and quality of social interactions and ultrasonic communication is unknown. The present study examines to which extent the habituation time to the test cage as well as the shape/size of the cage influence social communication in freely interacting mice. We tested 8 pairs of male mice in free dyadic social interactions, with two habituation times (20 min and 30 min and three cage formats (rectangle, round, square. We tested the effect of these conditions on the different types of social contacts, approach-escape sequences, follow behavior, and the time each animal spent in the vision field of the other one, as well as on the emission of ultrasonic vocalizations and their contexts of emission. We provide for the first time an integrated analysis of the social interaction behavior and ultrasonic vocalizations. Surprisingly, we did not highlight any significant effect of habituation time and cage shape/size on the behavioral events examined. There was only a slight increase of social interactions with the longer habituation time in the round cage. Remarkably, we also showed that vocalizations were emitted during specific behavioral sequences especially during close contact or approach behaviors. The present study provides a protocol reliably eliciting social contacts and ultrasonic vocalizations in adult male mice. This protocol is therefore well adapted for standardized investigation of social interactions in mouse models of neuropsychiatric disorders.

  2. Estimating the optimal growth-maximising public debt threshold for ...

    kirstam

    Dr N. Mupunga is at the Reserve Bank of Zimbabwe, and Prof. P. le Roux is in the Department of Economics, Nelson ..... negative correlation between debt and growth. Moreover the estimated endogenous ..... GDP ratio calibrated by the IMF and World Bank (2012: 25) for low-income countries rated weak in terms of country ...

  3. Estimating the optimal growth-maximising public debt threshold for ...

    kirstam

    Dr N. Mupunga is at the Reserve Bank of Zimbabwe, and Prof. P. le Roux is .... The debt overhang has also led to a huge credit risk premium for both ..... includes gross government debt-to-GDP and economic growth ratios, including almost all ...

  4. Influence of growth conditions on microstructure and defects in ...

    and dislocations in the intermediate Si layer are generated due to the development of non-uniform stresses during ... during the initial stages of growth on substrate and reporting ..... Research for financial support for carrying out the present.

  5. Optimizing the definition of intrauterine growth restriction: the multicenter prospective PORTO Study.

    Unterscheider, Julia

    2013-04-01

    The objective of the Prospective Observational Trial to Optimize Pediatric Health in Intrauterine Growth Restriction (IUGR) (PORTO Study), a national prospective observational multicenter study, was to evaluate which sonographic findings were associated with perinatal morbidity and mortality in pregnancies affected by growth restriction, originally defined as estimated fetal weight (EFW) <10th centile.

  6. Growth-Prediction Model for Blue Mussels (Mytilus edulis) on Future Optimally Thinned Farm-Ropes in Great Belt (Denmark)

    Larsen, Poul Scheel; Riisgård, Hans

    2016-01-01

    as a new Danish, smaller-sized consumer product. Field data for actual growth (from Day 0 = 14 June 2011) showed that size of ‘mini-mussel’ was reached on Day 109 (Oct 1) and length 38 mm on Day 178 (Dec 9) while the corresponding predictions using the extended model were Day 121 (Oct 13) and Day 159 (Nov...... 20). Similar results were obtained by use of the ad hoc BEG model which also demonstrated the sensitivity of growth prediction to levels of chl a concentration, but less to temperature. The results suggest that it is possible (when the conditions are optimal, i.e., no intraspecific competition...... competition may deviate from the potential (optimal) growth under specified chl a and temperature conditions, and this implies that the effect of thinning to optimize the individual growth by eliminating intraspecific competition can be rationally evaluated....

  7. Influence of the mycelium growth conditions on the production of amylolytic, proteolytic and pectinolytic enzymes by Aspergillus niger C

    Fiedurek, J.; Ilczuk, Z.; Lobarzewski, J. (Uniwersytet Marii Curie-Sklodowskiej, Lublin (Poland). Inst. Mikrobiologii i Biochemii)

    1989-01-01

    Various nitrogen and carbon sources, as well as natural products, were examined as inducers of the production of amylases, proteases and pectinases by A. niger C. A. niger C grown on wheat bran extract medium provided culture supernatants with the highest enzymatic activities. Some culture conditions, e.g. pH, medium temperature and time period of cultivation, were optimalized to improve the growth and enzyme biosynthesis by A. niger C. (orig.).

  8. Optimized inorganic carbon regime for enhanced growth and lipid accumulation in Chlorella vulgaris.

    Lohman, Egan J; Gardner, Robert D; Pedersen, Todd; Peyton, Brent M; Cooksey, Keith E; Gerlach, Robin

    2015-01-01

    Large-scale algal biofuel production has been limited, among other factors, by the availability of inorganic carbon in the culture medium at concentrations higher than achievable with atmospheric CO2. Life cycle analyses have concluded that costs associated with supplying CO2 to algal cultures are significant contributors to the overall energy consumption. A two-phase optimal growth and lipid accumulation scenario is presented, which (1) enhances the growth rate and (2) the triacylglyceride (TAG) accumulation rate in the oleaginous Chlorophyte Chlorella vulgaris strain UTEX 395, by growing the organism in the presence of low concentrations of NaHCO3 (5 mM) and controlling the pH of the system with a periodic gas sparge of 5 % CO2 (v/v). Once cultures reached the desired cell densities, which can be "fine-tuned" based on initial nutrient concentrations, cultures were switched to a lipid accumulation metabolism through the addition of 50 mM NaHCO3. This two-phase approach increased the specific growth rate of C. vulgaris by 69 % compared to cultures sparged continuously with 5 % CO2 (v/v); further, biomass productivity (g L(-1) day(-1)) was increased by 27 %. Total biodiesel potential [assessed as total fatty acid methyl ester (FAME) produced] was increased from 53.3 to 61 % (FAME biomass(-1)) under the optimized conditions; biodiesel productivity (g FAME L(-1) day(-1)) was increased by 7.7 %. A bicarbonate salt screen revealed that American Chemical Society (ACS) and industrial grade NaHCO3 induced the highest TAG accumulation (% w/w), whereas Na2CO3 did not induce significant TAG accumulation. NH4HCO3 had a negative effect on cell health presumably due to ammonia toxicity. The raw, unrefined form of trona, NaHCO3∙Na2CO3 (sodium sesquicarbonate) induced TAG accumulation, albeit to a slightly lower extent than the more refined forms of sodium bicarbonate. The strategic addition of sodium bicarbonate was found to enhance growth and lipid accumulation rates in

  9. Optimization of drilling mud conditioning for chemically enhanced centrifuging

    Wojtanowicz, A. K. [Louisiana State Univ., Baton Rouge, LA (United States); Ye, Y. [Jianghan Petroleum Institute, Beijing, (China)

    1998-05-01

    A simple method (the nine point (9-P) experiment) for finding optimum chemical conditioning that would maximize mud volume reduction, (i.e. enhance water removal or dewatering) and minimize the cost of the chemicals required, was described. The 9-P experiment is based on the statistical theory of factorial analysis and derives its name from the fact that it requires only nine tests to find the optimum treatment. The experimental design and the method of analysis are described. When compared to conventional trial-and-error approaches, the 9-P method showed a 1.78 to 2.35-fold increase in volume reduction efficiency, and up to 3.7-fold reduction in chemical usage.

  10. Growth Conditions Regulate the Requirements for Caulobacter Chromosome Segregation

    Shebelut, Conrad W.; Jensen, Rasmus Bugge; Gitai, Zemer

    2009-01-01

    Growth environments are important metabolic and developmental regulators. Here we demonstrate a growth environment-dependent effect on Caulobacter chromosome segregation of a small-molecule inhibitor of the MreB bacterial actin cytoskeleton. Our results also implicate ParAB as important segregation...... determinants, suggesting that multiple distinct mechanisms can mediate Caulobacter chromosome segregation and that their relative contributions can be environmentally regulated....

  11. Growth or reproduction: emergence of an evolutionary optimal strategy

    Grilli, J; Suweis, S; Maritan, A

    2013-01-01

    Modern ecology has re-emphasized the need for a quantitative understanding of the original ‘survival of the fittest theme’ based on analysis of the intricate trade-offs between competing evolutionary strategies that characterize the evolution of life. This is key to the understanding of species coexistence and ecosystem diversity under the omnipresent constraint of limited resources. In this work we propose an agent-based model replicating a community of interacting individuals, e.g. plants in a forest, where all are competing for the same finite amount of resources and each competitor is characterized by a specific growth–reproduction strategy. We show that such an evolution dynamics drives the system towards a stationary state characterized by an emergent optimal strategy, which in turn depends on the amount of available resources the ecosystem can rely on. We find that the share of resources used by individuals is power-law distributed with an exponent directly related to the optimal strategy. The model can be further generalized to devise optimal strategies in social and economical interacting systems dynamics. (paper)

  12. Fermentation conditions optimization of secondary metabolites of crocus sativus L in endophytic fungi

    DU Yan

    2012-08-01

    Full Text Available In this paper,Endophytic fungi,isolated from corm of saffron,were selected.Strains Q31 fermentation conditions on production of carotenoids were studied.Three kinds of carbon sources were selected.Study found that sucrose could promote cell growth and carotenoid accumulation,and amount of mycelium had an increase of 50.83% in the experimental group than the control group.Carotenoid yield was 23.15 times of the control group.Select three kinds of nitrogen and crosscombinations between them,found that add ammonium sulfate,Mycelium of experimental group had an increased of 86.43% than the control group and carotenoid yield was 5.91 times of the control group.the optimal conditions was found by orthogonal test:sucrose 40 g/L,ammonium sulfate 1.0 g/L,bottling amout 100 mL/250 mL,Inoculum size 5%.By using LC-MS to analyze secondary metabolites of endophytic fungi Q31 from saffron,we found it could steady metabolize one kind of carotinoid,its peak time was 22.447min,maximum absorption peaks were 414.4 and 438.3nm,MW was 738.

  13. Numerical Simulation of a Tumor Growth Dynamics Model Using Particle Swarm Optimization.

    Wang, Zhijun; Wang, Qing

    Tumor cell growth models involve high-dimensional parameter spaces that require computationally tractable methods to solve. To address a proposed tumor growth dynamics mathematical model, an instance of the particle swarm optimization method was implemented to speed up the search process in the multi-dimensional parameter space to find optimal parameter values that fit experimental data from mice cancel cells. The fitness function, which measures the difference between calculated results and experimental data, was minimized in the numerical simulation process. The results and search efficiency of the particle swarm optimization method were compared to those from other evolutional methods such as genetic algorithms.

  14. A model of optimal protein allocation during phototrophic growth

    Faizi, M.; Zavřel, Tomáš; Loureiro, C.; Červený, Jan; Steuer, Ralf

    2018-01-01

    Roč. 166, apr (2018), s. 26-36 ISSN 0303-2647 R&D Projects: GA MŠk(CZ) LO1415; GA ČR(CZ) GA15-17367S; GA MŠk(CZ) LM2015055 Institutional support: RVO:86652079 Keywords : Cellular protein economy * Cyanobacteria * Microbial growth laws * Photosynthesis * Resource allocation * Systems biology Subject RIV: EI - Biotechnology ; Bionics OBOR OECD: Environmental biotechnology Impact factor: 1.652, year: 2016

  15. Optimal display conditions for quantitative analysis of stereoscopic cerebral angiograms

    Charland, P.; Peters, T.; McGill Univ., Montreal, Quebec

    1996-01-01

    For several years the authors have been using a stereoscopic display as a tool in the planning of stereotactic neurosurgical techniques. This PC-based workstation allows the surgeon to interact with and view vascular images in three dimensions, as well as to perform quantitative analysis of the three-dimensional (3-D) space. Some of the perceptual issues relevant to the presentation of medical images on this stereoscopic display were addressed in five experiments. The authors show that a number of parameters--namely the shape, color, and depth cue, associated with a cursor--as well as the image filtering and observer position, have a role in improving the observer's perception of a 3-D image and his ability to localize points within the stereoscopically presented 3-D image. However, an analysis of the results indicates that while varying these parameters can lead to an effect on the performance of individual observers, the effects are not consistent across observers, and the mean accuracy remains relatively constant under the different experimental conditions

  16. Optimizing grade-control drillhole spacing with conditional simulations

    Adrian Martínez-Vargas

    2017-01-01

    Full Text Available This paper summarizes a method to determine the optimum spacing of grade-control drillholes drilled with reverse-circulation. The optimum drillhole spacing was defined as that one whose cost equals the cost of misclassifying ore and waste in selection mining units (SMU. The cost of misclassification of a given drillhole spacing is equal to the cost of processing waste misclassified as ore (Type I error plus the value of the ore misclassified as waste (Type II error. Type I and Type II errors were deduced by comparing true and estimated grades at SMUs, in relation to a cuttoff grade value and assuming free ore selection. True grades at SMUs and grades at drillhole samples were generated with conditional simulations. A set of estimated grades at SMU, one per each drillhole spacing, were generated with ordinary kriging. This method was used to determine the optimum drillhole spacing in a gold deposit. The results showed that the cost of misclassification is sensitive to extreme block values and tend to be overrepresented. Capping SMU’s lost values and implementing diggability constraints was recommended to improve calculations of total misclassification costs.

  17. Salicornia as a crop plant in temperate regions: selection of genetically characterized ecotypes and optimization of their cultivation conditions.

    Singh, Devesh; Buhmann, Anne K; Flowers, Tim J; Seal, Charlotte E; Papenbrock, Jutta

    2014-11-10

    Rising sea levels and salinization of groundwater due to global climate change result in fast-dwindling sources of freshwater. Therefore, it is important to find alternatives to grow food crops and vegetables. Halophytes are naturally evolved salt-tolerant plants that are adapted to grow in environments that inhibit the growth of most glycophytic crop plants substantially. Members of the Salicornioideae are promising candidates for saline agriculture due to their high tolerance to salinity. Our aim was to develop genetically characterized lines of Salicornia and Sarcocornia for further breeding and to determine optimal cultivation conditions. To obtain a large and diverse genetic pool, seeds were collected from different countries and ecological conditions. The external transcribed spacer (ETS) sequence of 62 Salicornia and Sarcocornia accessions was analysed: ETS sequence data showed a clear distinction between the two genera and between different Salicornia taxa. However, in some cases the ETS was not sufficiently variable to resolve morphologically distinct species. For the determination of optimal cultivation conditions, experiments on germination, seedling establishment and growth to a harvestable size were performed using different accessions of Salicornia spp. Experiments revealed that the percentage germination was greatest at lower salinities and with temperatures of 20/10 °C (day/night). Salicornia spp. produced more harvestable biomass in hydroponic culture than in sand culture, but the nutrient concentration requires optimization as hydroponically grown plants showed symptoms of stress. Salicornia ramosissima produced more harvestable biomass than Salicornia dolichostachya in artificial sea water containing 257 mM NaCl. Based on preliminary tests on ease of cultivation, gain in biomass, morphology and taste, S. dolichostachya was investigated in more detail, and the optimal salinity for seedling establishment was found to be 100 mM. Harvesting of S

  18. Selecting and optimizing eco-physiological parameters of Biome-BGC to reproduce observed woody and leaf biomass growth of Eucommia ulmoides plantation in China using Dakota optimizer

    Miyauchi, T.; Machimura, T.

    2013-12-01

    In the simulation using an ecosystem process model, the adjustment of parameters is indispensable for improving the accuracy of prediction. This procedure, however, requires much time and effort for approaching the simulation results to the measurements on models consisting of various ecosystem processes. In this study, we tried to apply a general purpose optimization tool in the parameter optimization of an ecosystem model, and examined its validity by comparing the simulated and measured biomass growth of a woody plantation. A biometric survey of tree biomass growth was performed in 2009 in an 11-year old Eucommia ulmoides plantation in Henan Province, China. Climate of the site was dry temperate. Leaf, above- and below-ground woody biomass were measured from three cut trees and converted into carbon mass per area by measured carbon contents and stem density. Yearly woody biomass growth of the plantation was calculated according to allometric relationships determined by tree ring analysis of seven cut trees. We used Biome-BGC (Thornton, 2002) to reproduce biomass growth of the plantation. Air temperature and humidity from 1981 to 2010 was used as input climate condition. The plant functional type was deciduous broadleaf, and non-optimizing parameters were left default. 11-year long normal simulations were performed following a spin-up run. In order to select optimizing parameters, we analyzed the sensitivity of leaf, above- and below-ground woody biomass to eco-physiological parameters. Following the selection, optimization of parameters was performed by using the Dakota optimizer. Dakota is an optimizer developed by Sandia National Laboratories for providing a systematic and rapid means to obtain optimal designs using simulation based models. As the object function, we calculated the sum of relative errors between simulated and measured leaf, above- and below-ground woody carbon at each of eleven years. In an alternative run, errors at the last year (at the

  19. Positive impact of bio-stimulators on growth and physiological activity of willow in climate change conditions

    Piotrowski, Krzysztof; Romanowska-Duda, Zdzisława

    2018-04-01

    The aim of this research was to evaluate the physiological activity and growth of willow (Salix viminalis L.) plants cultivated under the conditions of adverse temperature and soil moisture content, and to assess the effect of the foliar application of Biojodis (1.0%) and Asahi SL (0.03%) bio-stimulators, or a mixture of Microcistis aeruginosa MKR 0105 and Anabaena PCC 7120 cyanobacteria under such changing growth conditions. The obtained results showed different reactions to the applied constant or periodically changed temperature and soil moisture content. The plants which grew at periodically changed adverse temperature (from -5 to 40oC) or in scantily (20% m.c.) or excessively (60% m.c.) watered soils, grew slowly, in comparison with those growing at 20oC and in optimally moistened soil (30% m.c.). Foliar application of Biojodis and Asahi SL cyanobacteria increased the growth of willow at optimal and adverse temperature or in scantily and excessively moistened soil. The changes in plant growth were associated with the changes in electrolyte leakage, activity of acid or alkaline phosphatases, RNase, index of chlorophyll content in leaves and gas exchange. The above indicates that the foliar application of the studied cyanobacteria and bio-stimulators partly alleviates the harmful impact of adverse temperature and water stress on growth and physiological activity of willow plants

  20. Influence of growth conditions on microstructure and defects in ...

    improved crystal quality. 4. Conclusions. 1. Significant improvement of the diamond quality and an almost defect free diamond coating has been grown by combination of optimized process parameters like high hydrogen flow rates, moderate microwave power and chamber pressure of microwave plasma CVD. 2.

  1. Conditions for microbial growth in the FILTRA steam absorption tower

    Nilsson, H.; Roffey, R.

    1983-08-01

    By the appointment of the Southern Sweden Power Supply an experimental study has been carried out in order to evaluate the risk for microbial growth in the planned FILTRA steam absorbtion tower at the nuclear power plant in Barsebaeck. Four modelsystems were supplied with nitrogen atmosphere and a relative humidity of 100, 75, 50 and 25 percent. The fifth system received air and 75 percent relative humidity. Samples were collected and analysed for microbial growth after 1, 2, 4 and 8 months. The amounts of microorganisms and the ATP content was monitored. No measureable growth of any significance could be observed after 8 months in any system. An elementary analyses showed that the level of nitrogen and carbon in the stones was below the limit of detection (<0.3 percent C, <0.2 percent N). (author)

  2. Maximizing neotissue growth kinetics in a perfusion bioreactor: An in silico strategy using model reduction and Bayesian optimization.

    Mehrian, Mohammad; Guyot, Yann; Papantoniou, Ioannis; Olofsson, Simon; Sonnaert, Maarten; Misener, Ruth; Geris, Liesbet

    2018-03-01

    In regenerative medicine, computer models describing bioreactor processes can assist in designing optimal process conditions leading to robust and economically viable products. In this study, we started from a (3D) mechanistic model describing the growth of neotissue, comprised of cells, and extracellular matrix, in a perfusion bioreactor set-up influenced by the scaffold geometry, flow-induced shear stress, and a number of metabolic factors. Subsequently, we applied model reduction by reformulating the problem from a set of partial differential equations into a set of ordinary differential equations. Comparing the reduced model results to the mechanistic model results and to dedicated experimental results assesses the reduction step quality. The obtained homogenized model is 10 5 fold faster than the 3D version, allowing the application of rigorous optimization techniques. Bayesian optimization was applied to find the medium refreshment regime in terms of frequency and percentage of medium replaced that would maximize neotissue growth kinetics during 21 days of culture. The simulation results indicated that maximum neotissue growth will occur for a high frequency and medium replacement percentage, a finding that is corroborated by reports in the literature. This study demonstrates an in silico strategy for bioprocess optimization paying particular attention to the reduction of the associated computational cost. © 2017 Wiley Periodicals, Inc.

  3. Study of the optimal reaction conditions for assay of the mouse alternative complement pathway

    Dijk, H. van; Rademaker, P.M.; Klerx, J.P.A.M.; Willers, J.M.M.

    1985-01-01

    The optimal reaction conditions for hemolytic assay of alternative complement pathway activity in mouse serum were investigated. A microtiter system was used, in which a number of 7.5×106 rabbit erythrocytes per test well appeared to be optimal. Rabbit erythrocytes were superior as target cells over

  4. Vector-valued measure and the necessary conditions for the optimal control problems of linear systems

    Xunjing, L.

    1981-12-01

    The vector-valued measure defined by the well-posed linear boundary value problems is discussed. The maximum principle of the optimal control problem with non-convex constraint is proved by using the vector-valued measure. Especially, the necessary conditions of the optimal control of elliptic systems is derived without the convexity of the control domain and the cost function. (author)

  5. Optimizing continuous cover management of boreal forest when timber prices and tree growth are stochastic

    Timo Pukkala

    2015-03-01

    Full Text Available Background Decisions on forest management are made under risk and uncertainty because the stand development cannot be predicted exactly and future timber prices are unknown. Deterministic calculations may lead to biased advice on optimal forest management. The study optimized continuous cover management of boreal forest in a situation where tree growth, regeneration, and timber prices include uncertainty. Methods Both anticipatory and adaptive optimization approaches were used. The adaptive approach optimized the reservation price function instead of fixed cutting years. The future prices of different timber assortments were described by cross-correlated auto-regressive models. The high variation around ingrowth model was simulated using a model that describes the cross- and autocorrelations of the regeneration results of different species and years. Tree growth was predicted with individual tree models, the predictions of which were adjusted on the basis of a climate-induced growth trend, which was stochastic. Residuals of the deterministic diameter growth model were also simulated. They consisted of random tree factors and cross- and autocorrelated temporal terms. Results Of the analyzed factors, timber price caused most uncertainty in the calculation of the net present value of a certain management schedule. Ingrowth and climate trend were less significant sources of risk and uncertainty than tree growth. Stochastic anticipatory optimization led to more diverse post-cutting stand structures than obtained in deterministic optimization. Cutting interval was shorter when risk and uncertainty were included in the analyses. Conclusions Adaptive optimization and management led to 6%–14% higher net present values than obtained in management that was based on anticipatory optimization. Increasing risk aversion of the forest landowner led to earlier cuttings in a mature stand. The effect of risk attitude on optimization results was small.

  6. A Sufficient Condition on Convex Relaxation of AC Optimal Power Flow in Distribution Networks

    Huang, Shaojun; Wu, Qiuwei; Wang, Jianhui

    2016-01-01

    This paper proposes a sufficient condition for the convex relaxation of AC Optimal Power Flow (OPF) in radial distribution networks as a second order cone program (SOCP) to be exact. The condition requires that the allowed reverse power flow is only reactive or active, or none. Under the proposed...... solution of the SOCP can be converted to an optimal solution of the original AC OPF. The efficacy of the convex relaxation to solve the AC OPF is demonstrated by case studies of an optimal multi-period planning problem of electric vehicles (EVs) in distribution networks....... sufficient condition, the feasible sub-injection region (power injections of nodes excluding the root node) of the AC OPF is convex. The exactness of the convex relaxation under the proposed condition is proved through constructing a group of monotonic series with limits, which ensures that the optimal...

  7. Growth characteristics and enzyme production optimization of lipase Producing Strain

    Zheng, Chaocheng

    2018-01-01

    55 samples from different regions were selected and screened by Rhodamine B flat transparent circle method to observe lipase producing effect, among which, LHY-1, identified as Serratia sp. has the characteristics of fast growth, high enzyme production and stable ability. The colony of this strain is white, the edge is smooth and tidy, the surface is moist, the cell is straight, rod-shaped, gram negative, 0.1-0.2 μm in diameter and, length 0.3-0.5 μm in length.

  8. An optimization strategy for the control of small capacity heat pump integrated air-conditioning system

    Gao, Jiajia; Huang, Gongsheng; Xu, Xinhua

    2016-01-01

    Highlights: • An optimization strategy for a small-scale air-conditioning system is developed. • The optimization strategy aims at optimizing the overall system energy consumption. • The strategy may guarantee the robust control of the space air temperature. • The performance of the optimization strategy was tested on a simulation platform. - Abstract: This paper studies the optimization of a small-scale central air-conditioning system, in which the cooling is provided by a ground source heat pump (GSHP) equipped with an on/off capacity control. The optimization strategy aims to optimize the overall system energy consumption and simultaneously guarantee the robustness of the space air temperature control without violating the allowed GSHP maximum start-ups number per hour specified by customers. The set-point of the chilled water return temperature and the width of the water temperature control band are used as the decision variables for the optimization. The performance of the proposed strategy was tested on a simulation platform. Results show that the optimization strategy can save the energy consumption by 9.59% in a typical spring day and 2.97% in a typical summer day. Meanwhile it is able to enhance the space air temperature control robustness when compared with a basic control strategy without optimization.

  9. Analysis of Influence Factors on Extraction Rate of Lutein from Marigold and Optimization of Saponification Conditions

    Wang Xian-Qing; Li Man; Liu Yan-Yan; Liang Ying

    2015-01-01

    After lutein esters extracted by ultrasonic-assisted organic solvent from marigold powder, saponification conditions such as saponification solution concentration, saponification lipuid dosage, saponification temperature and saponification time were optimized by response surface analysis. The results showed that the optimal saponification conditions are saponification solution concentration 10%, saponification lipuid dosage 200 mL, saponification temperature 50°C, saponification time 2 h. Und...

  10. THE CONDITIONS OF TRANSITION TO INNOVATIVE TYPE OF ECONOMIC GROWTH

    D. E. Sorokin

    2010-01-01

    Article is devoted theoretical-methodological problems of transition of the Russian economy to innovative type of economic growth. Realization of the problems set forth above are possible only in case of a support of the Russian economy on the fifth technological way and its abilities to pass to the sixth technological way.

  11. Growth of Sulphuric Acid Nanoparticles Under Wet and Dry Conditions

    Škrabalová, Lenka; Brus, David; Antilla, T.; Ždímal, Vladimír; Lihavainen, H.

    2014-01-01

    Roč. 14, č. 12 (2014), s. 6461-6475 ISSN 1680-7316 R&D Projects: GA AV ČR IAA200760905 Grant - others:AFCEP(FI) 1118615 Institutional support: RVO:67985858 Keywords : binary nucleation * sulphuric acid - water * condensational growth Subject RIV: BJ - Thermodynamics Impact factor: 5.053, year: 2014

  12. Examining environmental condition on the growth areas of Turkish ...

    In this study, recent hazelnut growth areas were determined by Remote Sensing techniques for Trabzon province of Turkey. By using Geographical Information Systems (GIS) techniques, environmental data such as elevation, slope, aspect, geology, and soil data were produced and analyzed to examine environmental ...

  13. Second-order Optimality Conditions for Optimal Control of the Primitive Equations of the Ocean with Periodic Inputs

    Tachim Medjo, T.

    2011-01-01

    We investigate in this article the Pontryagin's maximum principle for control problem associated with the primitive equations (PEs) of the ocean with periodic inputs. We also derive a second-order sufficient condition for optimality. This work is closely related to Wang (SIAM J. Control Optim. 41(2):583-606, 2002) and He (Acta Math. Sci. Ser. B Engl. Ed. 26(4):729-734, 2006), in which the authors proved similar results for the three-dimensional Navier-Stokes (NS) systems.

  14. Collecting conditions usage metadata to optimize current and future ATLAS software and processing

    AUTHOR|(INSPIRE)INSPIRE-00064378; The ATLAS collaboration; Formica, Andrea; Gallas, Elizabeth; Oda, Susumu; Rinaldi, Lorenzo; Rybkin, Grigori; Verducci, Monica

    2017-01-01

    Conditions data (for example: alignment, calibration, data quality) are used extensively in the processing of real and simulated data in ATLAS. The volume and variety of the conditions data needed by different types of processing are quite diverse, so optimizing its access requires a careful understanding of conditions usage patterns. These patterns can be quantified by mining representative log files from each type of processing and gathering detailed information about conditions usage for that type of processing into a central repository.

  15. Optimal geometric structure for nanofluid-cooled microchannel heat sink under various constraint conditions

    Wang Xiaodong; Bin An; Xu Jinliang

    2013-01-01

    Highlights: ► An inverse geometry optimization method is used to optimize heat sink structure. ► Nanofluid is used as coolant of heat sink. ► Three parameters are simultaneously optimized at various constraint conditions. ► The optimal designs of nanofluid-cooled heat sink are obtained. - Abstract: A numerical model is developed to analyze the flow and heat transfer in nanofluid-cooled microchannel heat sink (MCHS). In the MCHS model, temperature-dependent thermophysical properties are taken into account due to large temperature differences in the MCHS and strong temperature-dependent characteristics of nanofluids, the model is validated by experimental data with good agreement. The simplified conjugate-gradient method is coupled with MCHS model as optimization tool. Three geometric parameters, including channel number, channel aspect ratio, and width ratio of channel to pitch, are simultaneously optimized at fixed inlet volume flow rate, fixed pumping power, and fixed pressure drop as constraint condition, respectively. The optimal designs of MCHS are obtained for various constraint conditions and the effects of inlet volume flow rate, pumping power, and pressure drop on the optimal geometric parameters are discussed.

  16. Enhanced Production of carboxymethylcellulase by a marine bacterium, Bacillus velezensis A-68, by using rice hulls in pilot-scale bioreactor under optimized conditions for dissolved oxygen.

    Gao, Wa; Kim, Hye-Jin; Chung, Chung-Han; Lee, Jin-Woo

    2014-09-01

    The optimal conditions for the production of carboxymethylcellulase (CMCase) by Bacillus velezensis A-68 at a flask scale have been previously reported. In this study, the parameters involved in dissolved oxygen in 7 and 100 L bioreactors were optimized for the pilot-scale production of CMCase. The optimal agitation speed and aeration rate for cell growth of B. velezensis A-68 were 323 rpm and 1.46 vvm in a 7 L bioreactor, whereas those for the production of CMCase were 380 rpm and 0.54 vvm, respectively. The analysis of variance (ANOVA) implied that the highly significant factor for cell growth was the aeration rate, whereas that for the production of CMCase was the agitation speed. The optimal inner pressures for cell growth and the production of CMCase by B. velezensis A-68 in a 100 L bioreactor were 0.00 and 0.04 MPa, respectively. The maximal production of CMCase in a 100 L bioreactor under optimized conditions using rice hulls was 108.1 U/ml, which was 1.8 times higher than that at a flask scale under previously optimized conditions.

  17. Optimation of Nitrogen and Phosphorus in Azolla Growth as Biofertilizer

    Hany Handajani

    2013-03-01

    Full Text Available Nitrogen is one of the most important minerals for living organisms. Azolla is known as a small water fern which can fix nitrogen through the symbiotic association with the blue green algae Anabaena. Experimental studies were carried out in the glass house, investigating the growth of Azolla using different levels of nitrogen and phosphorus in the media. The experiment used 12 treatments with 3 levels of nitrogen (0, 5, and 10 mg atom/L and 4 levels of phosphorus (0, 10, 20, and 30 mg atom/l in a factorial design with 3 replicates. The results show that the highest biomass for fresh weight (13.28 g, dry weight (1,126 g, and the fastest doubling time (7.71 days were found in combination of 10 mg atom/L N and 30 mg atom/L P. Meanwhile, the highest protein content was found in combination of 5 mg atom/L N and 20 mg atom/L P. After the third day heterocyst cells in Anabaena could only be found in those two combinations, but the highest heterocyst cells was found in the lower N and P combination similar to the highest protein content. Further experiment is suggested to introduce Azolla as bio-fertilizer for acid water system, such as peat land water.

  18. Plant Growth Optimization by Vegetable Production System in HI-SEAS Analog Habitat

    Ehrlich, Joshua W.; Massa, Gioia D.; Wheeler, Raymond M.; Gill, Tracy R.; Quincy, Charles D.; Roberson, Luke B.; Binsted, Kim; Morrow, Robert C.

    2017-01-01

    The Vegetable Production System (Veggie) is a scientific payload designed to support plant growth for food production under microgravity conditions. The configuration of Veggie consists of an LED lighting system with modular rooting pillows designed to contain substrate media and time-release fertilizer. The pillows were designed to be watered passively using capillary principles but have typically been watered manually by the astronauts in low-Earth orbit (LEO). The design of Veggie allows cabin air to be drawn through the plant enclosure for thermal and humidity control and for supplying CO2 to the plants. Since its delivery to the International Space Station (ISS) in 2014, Veggie has undergone several experimental trials by various crews. Ground unit testing of Veggie was conducted during an 8-month Mars analog study in a semi-contained environment of a simulated habitat located at approximately 8,200 feet (2,500 m) elevation on the Mauna Loa volcano on the Island of Hawaii. The Hawaii Space Exploration Analog and Simulation (HI-SEAS) offered conditions (habitat, mission, communications, etc.) intended to simulate a planetary exploration mission. This paper provides data and analyses to show the prospect for optimized use of the current Veggie design for human habitats. Lessons learned during the study may provide opportunities for updating the system design and operational parameters for current Veggie experiments being conducted onboard the ISS and for payloads on future deep space missions.

  19. Analysis of gene essentiality in Escherichia coli across strains and growth conditions

    Bonde, Ida; Lennen, Rebecca; Cardoso, Joao

    are either essential or detrimental for growth in the test condition in question. In this study the TN-Seq method was used to investigate the differences in gene essentiality between four laboratory strains of E.coli subjected to four different growth conditions to investigate the reason for the differences...

  20. Joint optimization of condition-based maintenance and production lot-sizing

    Peng, H.; van Houtum, G.J.J.A.N.

    2016-01-01

    Due to the development of sensor technologies nowadays, condition-based maintenance (CBM) programs can be established and optimized based on the data collected through condition monitoring. The CBM activities can significantly increase the uptime of a machine. However, they should be conducted in a

  1. The optimization of some of the conditions for analysis by spark-source mass spectrometry

    Pearton, D.C.P.; Sobiecki, A.

    1980-01-01

    The need for improved precision in spark-source mass spectrometry is highlighted. Several parameters, such as photoplate-development technique, instrumental stability and focus, and sparking conditions, were optimized. Measurements made under these optimum conditions attained precisions of more than 12 per cent

  2. The list of strains and growth conditions - The Rice Growth Monitoring for The Phenotypic Functional Analysis | LSDB Archive [Life Science Database Archive metadata

    Full Text Available List Contact us The Rice Growth Monitoring for The Phenotypic Functional Analysis The list of strains and growth... conditions Data detail Data name The list of strains and growth conditions DOI 10.18908/lsdba.nbdc00945...-001 Description of data contents The list of strains and growth conditions for respective samples. Data fil...servation Intervals of imaging Intervals of imaging Growth data Graph of chronological changes in growth Ima...History of This Database Site Policy | Contact Us The list of strains and growth conditions - The Rice Growth Monitoring for The Phenotypic Functional Analysis | LSDB Archive ...

  3. Growth Optimal Portfolio Selection Under Proportional Transaction Costs with Obligatory Diversification

    Duncan, T.; Pasik Duncan, B.; Stettner, L.

    2011-01-01

    A continuous time long run growth optimal or optimal logarithmic utility portfolio with proportional transaction costs consisting of a fixed proportional cost and a cost proportional to the volume of transaction is considered. The asset prices are modeled as exponent of diffusion with jumps whose parameters depend on a finite state Markov process of economic factors. An obligatory portfolio diversification is introduced, accordingly to which it is required to invest at least a fixed small portion of our wealth in each asset.

  4. An application of Pontrjagin's principle to the study of the optimal growth of population

    Spinadel, V. de

    1976-01-01

    This paper examines the consequences of an optimal control of population growth and allows to derive criteria referring to the economic basis of expenditure on population control and to obtain optimal paths for a model in which such a control is possible. By means of very simple assumptions one can reduce the problem to a two-state variable control problem and, in consequence, apply Pontrjagin's maximum principle to solve it. (author)

  5. Vision-based judgment of tomato maturity under growth conditions ...

    To determine the picking time of tomato and design the control strategy for the harvesting robot, the judgment of tomato maturity under natural conditions is ... Hue-mean and red-green color-difference image mean can be used as a criterion for the judgment of tomato maturity, and the tests indicated that the redgreen mean ...

  6. Optimization of photosynthesis, growth, and biochemical composition of the microalga Rhodomonas salina

    Thuy, Minh Vu Thi; Douëtte, Claire; Rayner, Thomas Allan

    2016-01-01

    The cryptophyte Rhodomonas salina is widely used as feed for copepod cultures. However, culturing conditions to obtain high-quality algae have not yet been efficiently optimized. Therefore, we aimed to develop a cultivation protocol for R. salina to optimize its nutritional value and provide tech...

  7. Spot-shadowing optimization to mitigate damage growth in a high-energy-laser amplifier chain.

    Bahk, Seung-Whan; Zuegel, Jonathan D; Fienup, James R; Widmayer, C Clay; Heebner, John

    2008-12-10

    A spot-shadowing technique to mitigate damage growth in a high-energy laser is studied. Its goal is to minimize the energy loss and undesirable hot spots in intermediate planes of the laser. A nonlinear optimization algorithm solves for the complex fields required to mitigate damage growth in the National Ignition Facility amplifier chain. The method is generally applicable to any large fusion laser.

  8. Optimal Application Timing of Pest Control Tactics in Nonautonomous Pest Growth Model

    Zhang, Shujuan; Liang, Juhua; Tang, Sanyi

    2014-01-01

    Considering the effects of the living environment on growth of populations, it is unrealistic to assume that the growth rates of predator and prey are all constants in the models with integrated pest management (IPM) strategies. Therefore, a nonautonomous predator-prey system with impulsive effect is developed and investigated in the present work. In order to determine the optimal application timing of IPM tactics, the threshold value which guarantees the stability of pest-free periodic solut...

  9. Creative Destruction and Optimal Patent Life in a Variety-Expanding Growth Model

    Lin, Hwan C.

    2013-01-01

    This paper presents more channels through which the optimal patent life is determined in a R&D-based endogenous growth model that permits growth of new varieties of consumer goods over time. Its modeling features include an endogenous hazard rate facing incumbent monopolists, the prevalence of research congestion, and the aggregate welfare importance of product differentiation. As a result, a patent’s effective life is endogenized and less than its legal life. The model is calibrated to a glo...

  10. Optimization of solid-state fermentation conditions for Trichoderma harzianum using an orthogonal test.

    Zhang, J D; Yang, Q

    2015-03-13

    The aim of this study was to develop a protocol for the production of fungal bio-pesticides with high efficiency, low cost, and non-polluting fermentation, while also increasing their survival rate under field conditions. This is the first study to develop biocontrol Trichoderma harzianum transformants TS1 that are resistant to benzimidazole fungicides. Agricultural corn stover and wheat bran waste were used as a medium and inducing carbon source for solid fermentation. Spore production was observed, and the method was optimized using single-factor tests with 4 factors at 3 levels in an orthogonal experimental design to determine the optimal culture conditions for T. harzianum TS1. In this step, we determined the best conditions for fermenting the biocontrol fungi. The optimal culture conditions for T. harzianum TS1 were cultivated for 8 days, a ratio of straw to wheat bran of 1:3, ammonium persulfate as the nitrogen source, and a water content of 30 mL. Under optimal culture conditions, the sporulation of T. harzianum TS1 reached 1.49 x 10(10) CFU/g, which was 1.46-fold higher than that achieved before optimization. Increased sporulation of T. harzianum TS1 results in better utilization of space and nutrients to achieve control of plant pathogens. This method allows for the recycling of agricultural waste straw.

  11. Existence conditions of optimal trajectories in dynamic control processes; Conditions d'existence de trajectoires optimales des processus dynamiques commandes

    Bonnemay-Juricek, L [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1968-07-01

    The existence of solutions in the optimal control problems with free endpoints is studied in this report and existence conditions are established without the usual assumption that the control region is convex. Furthermore the results, in order to be of some utility in physical applications, are expressed only by means of conditions on the parameters defining the system. (author) [French] Ce rapport etudie l'existence de solutions optimales dans les problemes de commande ou le point terminal est libre et ou la duree de l'evolution du systeme a optimiser est connue. Des conditions d'existence y sont formulees sans recourir a l'hypothese usuelle de convexite du domaine des valeurs des commandes. De plus on a cherche a rendre utilisables les resultats en ne faisant porter les conditions que sur les parametres directement accessibles du systeme. (auteur)

  12. Performing Comparative Peptidomics Analyses of Salmonella from Different Growth Conditions

    Adkins, Joshua N.; Mottaz, Heather; Metz, Thomas O.; Ansong, Charles K.; Manes, Nathan P.; Smith, Richard D.; Heffron, Fred

    2010-01-08

    Host–pathogen interactions are complex competitions during which both the host and the pathogen adapt rapidly to each other in order for one or the other to survive. Salmonella enterica serovar Typhimurium is a pathogen with a broad host range that causes a typhoid fever-like disease in mice and severe food poisoning in humans. The murine typhoid fever is a systemic infection in which S.typhimurium evades part of the immune system by replicating inside macrophages and other cells. The transition from a foodborne contaminant to an intracellular pathogen must occur rapidly in multiple,ordered steps in order for S. typhimurium to thrive within its host environment. Using S. typhimurium isolated from rich culture conditions and from conditions that mimic the hostile intracellular environment of the host cell, a native low molecular weight protein fraction, or peptidome, was enriched from cell lysates by precipitation with organic solvents. The enriched peptidome was analyzed by both LC–MS/MS and LC–MS-based methods, although several other methods are possible. Pre-fractionation of peptides allowed identification of small proteins and protein degradation products that would normally be overlooked. Comparison of peptides present in lysates prepared from Salmonella grown under different conditions provided a unique insight into cellular degradation processes as well as identification of novel peptides encoded in the genome but not annotated. The overall approach is detailed here as applied to Salmonella and is adaptable to a broad range of biological systems.

  13. Modelling and optimization of environmental conditions for kefiran production by Lactobacillus kefiranofaciens.

    Cheirsilp, B; Shimizu, H; Shioya, S

    2001-12-01

    A mathematical model for kefiran production by Lactobacillus kefiranofaciens was established, in which the effects of pH, substrate and product on cell growth, exopolysaccharide formation and substrate assimilation were considered. The model gave a good representation both of the formation of exopolysaccharides (which are not only attached to cells but also released into the medium) and of the time courses of the production of galactose and glucose in the medium (which are produced and consumed by the cells). Since pH and both lactose and lactic acid concentrations differently affected production and growth activity, the model included the effects of pH and the concentrations of lactose and lactic acid. Based on the mathematical model, an optimal pH profile for the maximum production of kefiran in batch culture was obtained. In this study, a simplified optimization method was developed, in which the optimal pH profile was determined at a particular final fermentation time. This was based on the principle that, at a certain time, switching from the maximum specific growth rate to the critical one (which yields the maximum specific production rate) results in maximum production. Maximum kefiran production was obtained, which was 20% higher than that obtained in the constant-pH control fermentation. A genetic algorithm (GA) was also applied to obtain the optimal pH profile; and it was found that practically the same solution was obtained using the GA.

  14. Growth curves and the international standard: How children's growth reflects challenging conditions in rural Timor-Leste.

    Spencer, Phoebe R; Sanders, Katherine A; Judge, Debra S

    2018-02-01

    Population-specific growth references are important in understanding local growth variation, especially in developing countries where child growth is poor and the need for effective health interventions is high. In this article, we use mixed longitudinal data to calculate the first growth curves for rural East Timorese children to identify where, during development, deviation from the international standards occurs. Over an eight-year period, 1,245 children from two ecologically distinct rural areas of Timor-Leste were measured a total of 4,904 times. We compared growth to the World Health Organization (WHO) standards using z-scores, and modeled height and weight velocity using the SuperImposition by Translation And Rotation (SITAR) method. Using the Generalized Additive Model for Location, Scale and Shape (GAMLSS) method, we created the first growth curves for rural Timorese children for height, weight and body mass index (BMI). Relative to the WHO standards, children show early-life growth faltering, and stunting throughout childhood and adolescence. The median height and weight for this population tracks below the WHO fifth centile. Males have poorer growth than females in both z-BMI (p = .001) and z-height-for-age (p = .018) and, unlike females, continue to grow into adulthood. This is the most comprehensive investigation to date of rural Timorese children's growth, and the growth curves created may potentially be used to identify future secular trends in growth as the country develops. We show significant deviation from the international standard that becomes most pronounced at adolescence, similar to the growth of other Asian populations. Males and females show different growth responses to challenging conditions in this population. © 2017 Wiley Periodicals, Inc.

  15. Deciphering flux adjustments of engineered E. coli cells during fermentation with changing growth conditions

    He, Lian [Washington Univ., St. Louis, MO (United States); Xiu, Yu [Rensselaer Polytechnic Inst., Troy, NY (United States); Beijing Univ. of Chemical Technology (China); Jones, J. Andrew [Rensselaer Polytechnic Inst., Troy, NY (United States); Hamilton College, Clinton, NY (United States); Baidoo, Edward E. K. [Joint BioEnergy Inst. (JBEI), Emeryville, CA (United States); Keasling, Jay D. [Joint BioEnergy Inst. (JBEI), Emeryville, CA (United States); Univ. of California, Berkeley, CA (United States); Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Technical Univ. of Denmark, Lyngby (Denmark); Tang, Yinjie J. [Washington Univ., St. Louis, MO (United States); Koffas, Mattheos A. G. [Rensselaer Polytechnic Inst., Troy, NY (United States)

    2016-12-23

    Microbial fermentation conditions are dynamic, due to transcriptional induction, nutrient consumption, or changes to incubation conditions. In this paper, 13C-metabolic flux analysis was used to characterize two violacein-producing E. coli strains with vastly different productivities, and to profile their metabolic adjustments resulting from external perturbations during fermentation. The two strains were first grown at 37 °C in stage 1, and then the temperature was transitioned to 20 °C in stage 2 for the optimal expression of the violacein synthesis pathway. After induction, violacein production was minimal in stage 3, but accelerated in stage 4 (early production phase) and 5 (late production phase) in the high producing strain, reaching a final concentration of 1.5 mmol/L. On the contrary, ~0.02 mmol/L of violacein was obtained from the low producing strain. To have a snapshot of the temporal metabolic changes in each stage, we performed 13C-MFA via isotopomer analysis of fast-turnover free metabolites. The results indicate strikingly stable flux ratios in the central metabolism throughout the early growth stages. In the late stages, however, the high producer rewired its flux distribution significantly, which featured an upregulated pentose phosphate pathway and TCA cycle, reflux from acetate utilization, negligible anabolic fluxes, and elevated maintenance loss, to compensate for nutrient depletion and drainage of some building blocks due to violacein overproduction. The low producer with stronger promoters shifted its relative fluxes in stage 5 by enhancing the flux through the TCA cycle and acetate overflow, while exhibiting a reduced biomass growth and a minimal flux towards violacein synthesis. Finally, interestingly, the addition of the violacein precursor (tryptophan) in the medium inhibited high producer but enhanced low producer's productivity, leading to hypotheses of unknown pathway regulations (such as metabolite

  16. Optimal design of multistage chemostats in series using different microbial growth kinetics

    Qasim, Muhammad [Petroleum Engineering Technology, Abu Dhabi Polytechnic (United Arab Emirates)

    2013-07-01

    In this paper, the optimum design of multistage chemostats (CSTRs) was investigated. The optimal design was based on the minimum overall reactor volume using different volume for each chemostat. The paper investigates three different microbial growth kinetics; Monod kinetics, Contois kinetics and the Logistic equation. The total dimensionless residence time (theta Total) was set as the optimization objective function that was minimized by varying the intermediate dimensionless substrate concentration (alfa i). The effect of inlet substrate concentration (S0) to the first reactor on the optimized total dimensionless residence time was investigated at a constant conversion of 0.90. In addition, the effect of conversion on the optimized total dimensionless residence time was also investigated at constant inlet substrate concentration (S0). For each case, optimization was done using up to five chemostats in series.

  17. Crack growth threshold under hold time conditions in DA Inconel 718 – A transition in the crack growth mechanism

    E. Fessler

    2016-01-01

    Full Text Available Aeroengine manufacturers have to demonstrate that critical components such as turbine disks, made of DA Inconel 718, meet the certification requirements in term of fatigue crack growth. In order to be more representative of the in service loading conditions, crack growth under hold time conditions is studied. Modelling crack growth under these conditions is challenging due to the combined effect of fatigue, creep and environment. Under these conditions, established models are often conservative but the degree of conservatism can be reduced by introducing the crack growth threshold in models. Here, the emphasis is laid on the characterization of crack growth rates in the low ΔK regime under hold time conditions and in particular, on the involved crack growth mechanism. Crack growth tests were carried out at high temperature (550 °C to 650 °C under hold time conditions (up to 1200 s in the low ΔK regime using a K-decreasing procedure. Scanning electron microscopy was used to identify the fracture mode involved in the low ΔK regime. EBSD analyses and BSE imaging were also carried out along the crack path for a more accurate identification of the fracture mode. A transition from intergranular to transgranular fracture was evidenced in the low ΔK regime and slip bands have also been observed at the tip of an arrested crack at low ΔK. Transgranular fracture and slip bands are usually observed under pure fatigue loading conditions. At low ΔK, hold time cycles are believed to act as equivalent pure fatigue cycles. This change in the crack growth mechanism under hold time conditions at low ΔK is discussed regarding results related to intergranular crack tip oxidation and its effect on the crack growth behaviour of Inconel 718 alloy. A concept based on an “effective oxygen partial pressure” at the crack tip is proposed to explain the transition from transgranular to intergranular fracture in the low ΔK regime.

  18. Conditions for characterizing the structure of optimal strategies in infinite-horizon dynamic programs

    Porteus, E.

    1982-01-01

    The study of infinite-horizon nonstationary dynamic programs using the operator approach is continued. The point of view here differs slightly from that taken by others, in that Denardo's local income function is not used as a starting point. Infinite-horizon values are defined as limits of finite-horizon values, as the horizons get long. Two important conditions of an earlier paper are weakened, yet the optimality equations, the optimality criterion, and the existence of optimal ''structured'' strategies are still obtained

  19. Element stacking method for topology optimization with material-dependent boundary and loading conditions

    Yoon, Gil Ho; Park, Y.K.; Kim, Y.Y.

    2007-01-01

    A new topology optimization scheme, called the element stacking method, is developed to better handle design optimization involving material-dependent boundary conditions and selection of elements of different types. If these problems are solved by existing standard approaches, complicated finite...... element models or topology optimization reformulation may be necessary. The key idea of the proposed method is to stack multiple elements on the same discretization pixel and select a single or no element. In this method, stacked elements on the same pixel have the same coordinates but may have...... independent degrees of freedom. Some test problems are considered to check the effectiveness of the proposed stacking method....

  20. Optimal control of algae growth by controlling CO 2 and nutrition flow using Pontryagin Maximum Principle

    Mardlijah; Jamil, Ahmad; Hanafi, Lukman; Sanjaya, Suharmadi

    2017-09-01

    There are so many benefit of algae. One of them is using for renewable energy and sustainable in the future. The greater growth of algae will increasing biodiesel production and the increase of algae growth is influenced by glucose, nutrients and photosynthesis process. In this paper, the optimal control problem of the growth of algae is discussed. The objective function is to maximize the concentration of dry algae while the control is the flow of carbon dioxide and the nutrition. The solution is obtained by applying the Pontryagin Maximum Principle. and the result show that the concentration of algae increased more than 15 %.

  1. A method for aggregating external operating conditions in multi-generation system optimization models

    Lythcke-Jørgensen, Christoffer Ernst; Münster, Marie; Ensinas, Adriano Viana

    2016-01-01

    This paper presents a novel, simple method for reducing external operating condition datasets to be used in multi-generation system optimization models. The method, called the Characteristic Operating Pattern (CHOP) method, is a visually-based aggregation method that clusters reference data based...... on parameter values rather than time of occurrence, thereby preserving important information on short-term relations between the relevant operating parameters. This is opposed to commonly used methods where data are averaged over chronological periods (months or years), and extreme conditions are hidden...... in the averaged values. The CHOP method is tested in a case study where the operation of a fictive Danish combined heat and power plant is optimized over a historical 5-year period. The optimization model is solved using the full external operating condition dataset, a reduced dataset obtained using the CHOP...

  2. Optimal control of distributed parameter system with incomplete information about the initial condition

    Kotarski, W.; Kowalewski, A.

    1982-03-01

    In this paper we consider an optimal control problem for a system described by a linear partial differential equation of the parabolic type with Dirichlet's boundary condition. We impose some constraints on the control. The performance functional has the integral form. The control time T is fixed. The initial condition is not given by a known function but belongs to a certain set (incomplete information about the initial state). The problem formulated in this paper describes the process of optimal heating, of which we do not have exact information about the initial temperature on the heated object. We present an example in which the set of admissible controls and one of initial conditions are given by means of the norm constraints too. The application of the well-known projective gradient method in the Hilbert space allows us to obtain the numerical solution for our optimization problem. (author)

  3. Optimal distributed control of a diffuse interface model of tumor growth

    Colli, Pierluigi; Gilardi, Gianni; Rocca, Elisabetta; Sprekels, Jürgen

    2017-06-01

    In this paper, a distributed optimal control problem is studied for a diffuse interface model of tumor growth which was proposed by Hawkins-Daruud et al in Hawkins-Daruud et al (2011 Int. J. Numer. Math. Biomed. Eng. 28 3-24). The model consists of a Cahn-Hilliard equation for the tumor cell fraction φ coupled to a reaction-diffusion equation for a function σ representing the nutrient-rich extracellular water volume fraction. The distributed control u monitors as a right-hand side of the equation for σ and can be interpreted as a nutrient supply or a medication, while the cost function, which is of standard tracking type, is meant to keep the tumor cell fraction under control during the evolution. We show that the control-to-state operator is Fréchet differentiable between appropriate Banach spaces and derive the first-order necessary optimality conditions in terms of a variational inequality involving the adjoint state variables. The financial support of the FP7-IDEAS-ERC-StG #256872 (EntroPhase) and of the project Fondazione Cariplo-Regione Lombardia MEGAsTAR ‘Matematica d’Eccellenza in biologia ed ingegneria come accelleratore di una nuona strateGia per l’ATtRattività dell’ateneo pavese’ is gratefully acknowledged. The paper also benefited from the support of the MIUR-PRIN Grant 2015PA5MP7 ‘Calculus of Variations’ for PC and GG, and the GNAMPA (Gruppo Nazionale per l’Analisi Matematica, la Probabilità e le loro Applicazioni) of INdAM (Istituto Nazionale di Alta Matematica) for PC, GG and ER.

  4. Optimization of conditions for probiotic curd formulation by Enterococcus faecium MTCC 5695 with probiotic properties using response surface methodology.

    Ramakrishnan, Vrinda; Goveas, Louella Concepta; Prakash, Maya; Halami, Prakash M; Narayan, Bhaskar

    2014-11-01

    Enterococcus faecium MTCC 5695 possessing potential probiotic properties as well as enterocin producing ability was used as starter culture. Effect of time (12-24 h) and inoculum level (3-7 % v/v) on cell growth, bacteriocin production, antioxidant property, titrable acidity and pH of curd was studied by response surface methodology (RSM). The optimized conditions were 26.48 h and 2.17%v/v inoculum and the second order model validated. Co cultivation studies revealed that the formulated product had the ability to prevent growth of foodborne pathogens that affect keeping quality of the product during storage. The results indicated that application of E. faecium MTCC 5695 along with usage of optimized conditions attributed to the formation of highly consistent well set curd with bioactive and bioprotective properties. Formulated curd with potential probiotic attributes can be used as therapeutic agent for the treatment of foodborne diseases like Traveler's diarrhea and gastroenteritis which thereby help in improvement of bowel health.

  5. OPTIMIZING CONDITIONS FOR SPECTROPHOTOMETRIC DETERMINATION OF TOTAL POLYPHENOLS IN WINES USING FOLIN-CIOCALTEU REAGENT

    Daniel Bajčan

    2013-02-01

    Full Text Available Wine is a complex beverage that obtains its properties mainly due to synergistic effect of alcohol, organic acids, arbohydrates, as well as the phenolic and aromatic substances. At present days, we can observe an increased interest in the study of polyphenols in wines that have antioxidant, antimicrobial, anti-inflammatory, anti-cancer and many other beneficial effects. Moderate and regular consumption of the red wine especially, with a high content of phenolic compounds, has a beneficial effect on human health. The aim of this work was to optimize conditions for spectrophotometric determination of total polyphenols in winwas to optimize conditions for spectrophotometric determination of total polyphenols in winwas to optimize conditions for spectrophotometric determination of total polyphenols in winwas to optimize conditions for pectrophotometric determination of total polyphenols in wine using Folin-Ciocaulteu reagent. Based on several studies, in order to minimize chemical use and optimize analysis time, we have proposed a method for the determination of total polyphenols using 0.25 ml Folin-Ciocaulteu reagent, 3 ml of 20% Na2CO3 solution and time of coloring complex 1.5 hour. We f

  6. Evaluation of different feeds for optimal growth and survival of parthenogenetic brine shrimp, Artemia

    Sumitra-Vijayaraghavan; Krishnakumari, L.; Royan, J.P.

    intestinalis and Ulva fasciata). Rice bran yielded best growth at an optimal level of 0.1 and 0.5 mg.ml-1 d-1 respectively for 1-4 and 4-8 d old larvae. Rice bran was also the best food for outdoor cultures. Artemia fed rice bran took shortest time to reach...

  7. Behavior and sensitivity of an optimal tree diameter growth model under data uncertainty

    Don C. Bragg

    2005-01-01

    Using loblolly pine, shortleaf pine, white oak, and northern red oak as examples, this paper considers the behavior of potential relative increment (PRI) models of optimal tree diameter growth under data uncertainity. Recommendations on intial sample size and the PRI iteractive curve fitting process are provided. Combining different state inventories prior to PRI model...

  8. Optimal tax rate and economic growth. Evidence from Nigeria and South Africa

    Olufemi Muibi SAIBU

    2015-05-01

    Full Text Available The recent economic crisis had made developing countries to look inward for financial resources to finance development. The readily alternative is the tax revenues however, the possible adverse direct and indirect effects of tax on productivity and work efforts as well as on aggregate consumption had make some African countries (especially Nigeria and South Africa reluctant in implementing far reaching tax policy reform. This paper examines optimal tax burden and real output growth Nigeria and South Africa, two of the top four economies in Africa. The paper empirically determined what should be the optimal tax rate for Nigeria and South Africa-the two leading economies in Africa. The paper found that nonlinearity hypothesis in the effects of tax in the case of South Africa is rejected while a significant nonlinear relationship is found in the case of Nigeria. The results suggest that the growth-maximizing tax rate is about 15% of per capita GDP for South Africa and 30% for Nigeria. At that tax rate, the economic growth rate would be around 6% and 8% instead of the actual mean growth rate of 2.84% and 4.51% for South Africa and Nigeria respectively. The paper concluded the current tax burden in the two countries may be sub-optimal and may hurt long term sustainable growth process in the two countries

  9. Conditions associated with Clostridium sporogenes growth as a surrogate for Clostridium botulinum in nonthermally processed canned butter.

    Taylor, R H; Dunn, M L; Ogden, L V; Jefferies, L K; Eggett, D L; Steele, F M

    2013-05-01

    The objective of this study was to better understand the effect of butter composition and emulsion structure on growth and survival of Clostridium sporogenes, used as a surrogate for C. botulinum in canned butter. The lack of a thermal process step in commercially available canned butter raises questions of potential safety, because it is hermetically sealed and generally exhibits anaerobic growth conditions, which are optimal for Clostridium botulinum growth. Without thermal processing, low-acid canned foods must have inhibitory factors present to prevent C. botulinum growth. Some potential intrinsic inhibitory factors, or hurdles, within butter include: reduced water activity, acidity in cultured products, elevated salt content, and the micro-droplet nature of the aqueous phase in the butter emulsion. It was hypothesized that a normal, intact butter emulsion would have sufficient hurdles to prevent C. botulinum growth, whereas a broken butter emulsion would result in a coalesced aqueous phase that would allow for C. botulinum growth. Batch-churned butter was inoculated with C. sporogenes; butter samples with varying salt contents (0, 0.8, 1.6, and 2.4% wt/wt NaCl) were prepared and stored in coated steel cans for varying times (1 or 2 wk) and temperatures (22 or 41°C) to determine temperature and emulsion structure effects on C. sporogenes growth. Samples stored at 41°C showed a significant increase in C. sporogenes growth compared with those stored at 22°C. Furthermore, NaCl addition was found to have a significant effect on C. sporogenes growth, with 0.8% NaCl promoting more growth than 0%, but with decreases in growth observed at 1.6 and 2.4%. Uninoculated control plates were also found to have bacterial growth; this growth was attributed to other anaerobic bacteria present within the cream. It was concluded that removal of the hurdle created by the micro-droplet size of the emulsion aqueous phase could result in C. botulinum growth even at elevated salt

  10. Identification of risk conditions for the development of adrenal disorders: how optimized PubMed search strategies makes the difference.

    Guaraldi, Federica; Parasiliti-Caprino, Mirko; Goggi, Riccardo; Beccuti, Guglielmo; Grottoli, Silvia; Arvat, Emanuela; Ghizzoni, Lucia; Ghigo, Ezio; Giordano, Roberta; Gori, Davide

    2014-12-01

    The exponential growth of scientific literature available through electronic databases (namely PubMed) has increased the chance of finding interesting articles. At the same time, search has become more complicated, time consuming, and at risk of missing important information. Therefore, optimized strategies have to be adopted to maximize searching impact. The aim of this study was to formulate efficient strings to search PubMed for etiologic associations between adrenal disorders (ADs) and other conditions. A comprehensive list of terms identifying endogenous conditions primarily affecting adrenals was compiled. An ad hoc analysis was performed to find the best way to express each term in order to find the highest number of potentially pertinent articles in PubMed. A predefined number of retrieved abstracts were read to assess their association with ADs' etiology. A more sensitive (providing the largest literature coverage) and a more specific (including only those terms retrieving >40 % of potentially pertinent articles) string were formulated. Various researches were performed to assess strings' ability to identify articles of interest in comparison with non-optimized literature searches. We formulated optimized, ready applicable tools for the identification of the literature assessing etiologic associations in the field of ADs using PubMed, and demonstrated the advantages deriving from their application. Detailed description of the methodological process is also provided, so that this work can easily be translated to other fields of practice.

  11. A Synchrotron FTIR Microspectroscopy Investigation of Fungal Hyphae Grown under Optimal and Stressed Conditions

    Szeghalmi, A.; Kaminskyj, S.; Gough, K.

    2007-01-01

    Synchrotron FTIR can provide high spatial resolution ( o C but have growth defects at 42 o C. We have also investigated Neurospora and Rhizopus cultures grown in media with optimal or elevated pH. Significant differences between the spectra of the three fungi are likely related to differences in composition and structure. In addition, high spatial resolution synchrotron FTIR spectroscopy provides an outstanding method for monitoring subtle subcellular changes that accompany environmental stress

  12. Effects of plant–soil feedback on tree seedling growth under arid conditions

    Meijer, S.S.; Holmgren, M.; Van der Putten, W.H.

    2011-01-01

    Aims Plants are able to influence their growing environment by changing biotic and abiotic soil conditions. These soil conditions in turn can influence plant growth conditions, which is called plant–soil feedback. Plant–soil feedback is known to be operative in a wide variety of ecosystems ranging

  13. Effects of plant-soil feedback on tree seedling growth under arid conditions

    Meijer, S.S.; Holmgren, M.; Putten, van der W.H.

    2011-01-01

    Aims: Plants are able to influence their growing environment by changing biotic and abiotic soil conditions. These soil conditions in turn can influence plant growth conditions, which is called plant–soil feedback. Plant–soil feedback is known to be operative in a wide variety of ecosystems ranging

  14. Optimization of deposition conditions of CdS thin films using response surface methodology

    Yücel, Ersin, E-mail: dr.ersinyucel@gmail.com [Department of Physics, Faculty of Arts and Sciences, Mustafa Kemal University, 31034 Hatay (Turkey); Güler, Nuray [Department of Physics, Faculty of Arts and Sciences, Mustafa Kemal University, 31034 Hatay (Turkey); Yücel, Yasin [Department of Chemistry, Faculty of Arts and Sciences, Mustafa Kemal University, 31034 Hatay (Turkey)

    2014-03-15

    Highlights: • Statistical methods used for optimization of CdS deposition parameters. • The morphology of the films was smooth, homogeneous and continuous. • Optimal conditions found as pH 11, stirring speed:361 rpm and deposition time: 55 min. • CdS thin film band gap value was 2.72 eV under the optimum conditions. -- Abstract: Cadmium sulfide (CdS) thin films were prepared on glass substrates by chemical bath deposition (CBD) technique under different pH, stirring speed and deposition time. Response Surface Methodology (RSM) and Central Composite Design (CCD) were used to optimization of deposition parameters of the CdS thin films. RSM and CCD were also used to understand the significance and interaction of the factors affecting the film quality. Variables were determined as pH, stirring speed and deposition time. The band gap was chosen as response in the study. Influences of the variables on the band gap and the film quality were investigated. 5-level-3-factor central composite design was employed to evaluate the effects of the deposition conditions parameters such as pH (10.2–11.8), stirring speed (132–468 rpm) and deposition time (33–67 min) on the band gap of the films. The samples were characterized using X-ray diffraction (XRD), scanning electron microscope (SEM) and ultraviolet–visible spectroscopy (UV–vis) measurements. The optimal conditions for the deposition parameters of the CdS thin films have been found to be: pH 11, 361 of stirring speed and 55 min of deposition time. Under the optimal conditions theoretical (predicted) band gap of CdS (2.66 eV) was calculated using optimal coded values from the model and the theoretical value is good agreement with the value (2.72 eV) obtained by verification experiment.

  15. Mutation and screening of high-alcoholic-yield yeast by HEPE and optimization of the fermentation condition

    Han Jingjing; Lu Jiangtao; Zhang Qin; Wang Yan; Fu Yujie; Wang Shilong; Fu Haiying

    2011-01-01

    The Saccharomyces Cerevisiae YE0 was mutated using high-energy-pulse-electron (HEPE) beam. After ethanol stress and determination of the alcohol yield by gas chromatograph, the mutant YF1 with high alcoholic yield was obtained. The results showed that under the optimized fermentation conditions (34 degree C as the fermentation temperature, 72 h as the fermentation time and 30% as the glucose concentration), the alcoholic yield of YF1 was 15.57% which was 58.23% higher than that of the original strain YE0 (9.84%) under the same conditions. The growth rate and lethal temperature of the mutant YF1 were obviously enhanced to the original strain YE0. The mutant YF1 has a great potential application in industrial production of alcohol. And it can also be used as the original strain for further mutagenesis to get the strain of higher alcoholic yield. (authors)

  16. Optimal operating conditions for external cavity semiconductor laser optical chaos communication system

    Priyadarshi, S; Pierce, I; Hong, Y; Shore, K A

    2012-01-01

    In optical chaos communications a message is masked in the noise-like broadband output of a chaotic transmitter laser, and message recovery is enabled through the synchronization of the transmitter and the (chaotic) receiver laser. Key issues are to identify the laser operating conditions which provide the highest quality synchronization conditions and those which provide optimized message extraction. In general such operating conditions are not coincident. In this paper numerical simulations are performed with the aim of identifying a regime of operation where the highest quality synchronization and optimizing message extraction efficiency are achieved simultaneously. Use of such an operating regime will facilitate practical deployment of optical chaos communications systems without the need for re-adjustment of laser operating conditions in the field. (paper)

  17. The impact of quantitative optimization of hybridization conditions on gene expression analysis

    Auburn Richard P

    2011-03-01

    Full Text Available Abstract Background With the growing availability of entire genome sequences, an increasing number of scientists can exploit oligonucleotide microarrays for genome-scale expression studies. While probe-design is a major research area, relatively little work has been reported on the optimization of microarray protocols. Results As shown in this study, suboptimal conditions can have considerable impact on biologically relevant observations. For example, deviation from the optimal temperature by one degree Celsius lead to a loss of up to 44% of differentially expressed genes identified. While genes from thousands of Gene Ontology categories were affected, transcription factors and other low-copy-number regulators were disproportionately lost. Calibrated protocols are thus required in order to take full advantage of the large dynamic range of microarrays. For an objective optimization of protocols we introduce an approach that maximizes the amount of information obtained per experiment. A comparison of two typical samples is sufficient for this calibration. We can ensure, however, that optimization results are independent of the samples and the specific measures used for calibration. Both simulations and spike-in experiments confirmed an unbiased determination of generally optimal experimental conditions. Conclusions Well calibrated hybridization conditions are thus easily achieved and necessary for the efficient detection of differential expression. They are essential for the sensitive pro filing of low-copy-number molecules. This is particularly critical for studies of transcription factor expression, or the inference and study of regulatory networks.

  18. The influence of antioxidants 'TIOFAN' and 'FANTOX 11-1' on physiological growth of broilers in conditions of intoxication with lead and cadmium salts

    Koval, Yu.I.; Bokova, T.I.; Kandalintseva, N.V.

    2008-01-01

    The purpose of research is to study the influence of antioxidants 'TIOFAN' and 'FANTOX 11-1' on physiological growth of broilers in conditions of intoxication with lead and cadmium salts. The growth and development of bird in conditions of intoxication with heavy metals and by using of antioxidants as detoxicant is studied. The biochemical blood values on application of antioxidants and without them in conditions of intoxication are determined. The most effective preparation raising of birds productivity and it's optimal concentration is established.

  19. Temperature and pH conditions for mycelial growth of Agaricus brasiliensis on axenic cultivation

    Colauto, Nelson Barros; Universidade Paranaense; Aizono, Patrícia Midori; Universidade Paranaense; Carvalho, Lis Ribeiro Magalhães de; Universidade Paranaense; Paccola-Meirelles, Luzia Doretto; Universidade Estadual de Londrina; Linde, Giani Andrea; Universidade Paranaense

    2008-01-01

    Few studies have been done to determine Agaricus brasiliensis Wasser et al. (A. blazei; A. subrufescens) basic mycelial growth characteristics on axenic cultivation. This study aimed to determine the optimal temperature and initial pH for mycelial growth of A. brasiliensis on malt extract agar medium to develop axenic cultivation techniques. Studied initial pH values for mycelial growth were adjusted to 3.0, 4.0, 5.0, 5.5, with HCl, 6.0, 7.0, 8.0, with NaOH, and again 7.0 and 8.0, with CaCO3....

  20. Growth Protocols for Etiolated Soybeans Germinated within BRIC-60 Canisters Under Spaceflight Conditions

    Levine, H. G.; Sharek, J. A.; Johnson, K. M.; Stryjewski, E. C.; Prima, V. I.; Martynenko, O. I.; Piastuch, W. C.

    As part of the GENEX (Gene Expression) spaceflight experiment, protocols were developed to optimize the inflight germination and subsequent growth of 192 soybean (Glycine max cv McCall) seeds during STS-87. We describe a method which provided uniform growth and development of etiolated seedlings while eliminating root and shoot restrictions for short-term (4-7 day) experiments. Final seedling growth morphologies and the gaseous CO2 and ethylene levels present both on the last day in space and at the time of recovery within the spaceflight and ground control BRIC-60 canisters are presented

  1. Effects of environmental conditions on growth and survival of Salmonella in pasteurized whole egg

    Jakociune, Dziuginta; Bisgaard, Magne; Hervé, Gaëlle

    2014-01-01

    This study investigated the influence of three parameters (time, temperature and NaCl concentration) on survival and four parameters (temperature, NaCl and lysozyme concentrations and pH) on growth of Salmonella enterica serovar Enteritidis (S. Enteritidis) in pasteurized whole egg (PWE). Doehlert......Cl at a fixed heating time of 120s, while maximum growth rate was estimated at 25°C and 0% of NaCl. pH and lysozyme concentration were shown not to influence growth performance significantly in the range of values studied. Results inform industry of the optimal pasteurization and storage parameters for liquid...

  2. Optimal registration conditions for tooth EPR dosimetry at low accumulated dose

    Galtsev, V.E.; Galtseva, E.V.; Lebedev, Y.S.

    1997-01-01

    The spectrum registration under rapid passage conditions (the second harmonic phase quadrature of the absorption signal) allows one to enhance substantially the sensitivity of tooth enamel and bone EPR dosimetry at a low accumulated dose. In the present work the dependencies of the radiation and background signals on EPR spectrometer parameters are described and the optimal conditions in RPM for EPR dosimetry are obtained. (Author)

  3. Use Conditions and Efficiency Measurements of DC Power Optimizers for Photovoltaic Systems: Preprint

    Deline, C.; MacAlpine, S.

    2013-10-01

    No consensus standard exists for estimating annual conversion efficiency of DC-DC converters or power optimizers in photovoltaic (PV) applications. The performance benefits of PV power electronics including per-panel DC-DC converters depend in large part on the operating conditions of the PV system, along with the performance characteristics of the power optimizer itself. This work presents acase study of three system configurations that take advantage of the capabilities of DC power optimizers. Measured conversion efficiencies of DC-DC converters are applied to these scenarios to determine the annual weighted operating efficiency. A simplified general method of reporting weighted efficiency is given, based on the California Energy Commission's CEC efficiency rating and severalinput / output voltage ratios. Efficiency measurements of commercial power optimizer products are presented using the new performance metric, along with a description of the limitations of the approach.

  4. Determination of Optimal Flow Paths for Safety Injection According to Accident Conditions

    Yoo, Kwae Hwan; Kim, Ju Hyun; Kim, Dong Yeong; Na, Man Gyun [Chosun Univ., Gwangju (Korea, Republic of); Hur, Seop; Kim, Changhwoi [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2014-05-15

    In case severe accidents happen, major safety parameters of nuclear reactors are rapidly changed. Therefore, operators are unable to respond appropriately. This situation causes the human error of operators that led to serious accidents at Chernobyl. In this study, we aimed to develop an algorithm that can be used to select the optimal flow path for cold shutdown in serious accidents, and to recover an NPP quickly and efficiently from the severe accidents. In order to select the optimal flow path, we applied a Dijkstra algorithm. The Dijkstra algorithm is used to find the path of minimum total length between two given nodes and needs a weight (or length) matrix. In this study, the weight between nodes was calculated from frictional and minor losses inside pipes. That is, the optimal flow path is found so that the pressure drop between a starting node (water source) and a destination node (position that cooling water is injected) is minimized. In case a severe accident has happened, if we inject cooling water through the optimized flow path, then the nuclear reactor will be safely and effectively returned into the cold shutdown state. In this study, we have analyzed the optimal flow paths for safety injection as a preliminary study for developing an accident recovery system. After analyzing the optimal flow path using the Dijkstra algorithm, and the optimal flow paths were selected by calculating the head loss according to path conditions.

  5. Applying Central Composite Design and Response Surface Methodology to Optimize Growth and Biomass Production of Haemophilus influenzae Type b.

    Momen, Seyed Bahman; Siadat, Seyed Davar; Akbari, Neda; Ranjbar, Bijan; Khajeh, Khosro

    2016-06-01

    Haemophilus influenzae type b (Hib) is the leading cause of bacterial meningitis, otitis media, pneumonia, cellulitis, bacteremia, and septic arthritis in infants and young children. The Hib capsule contains the major virulence factor, and is composed of polyribosyl ribitol phosphate (PRP) that can induce immune system response. Vaccines consisting of Hib capsular polysaccharide (PRP) conjugated to a carrier protein are effective in the prevention of the infections. However, due to costly processes in PRP production, these vaccines are too expensive. To enhance biomass, in this research we focused on optimizing Hib growth with respect to physical factors such as pH, temperature, and agitation by using a response surface methodology (RSM). We employed a central composite design (CCD) and a response surface methodology to determine the optimum cultivation conditions for growth and biomass production of H. influenzae type b. The treatment factors investigated were initial pH, agitation, and temperature, using shaking flasks. After Hib cultivation and determination of dry biomass, analysis of experimental data was performed by the RSM-CCD. The model showed that temperature and pH had an interactive effect on Hib biomass production. The dry biomass produced in shaking flasks was about 5470 mg/L, which was under an initial pH of 8.5, at 250 rpm and 35° C. We found CCD and RSM very effective in optimizing Hib culture conditions, and Hib biomass production was greatly influenced by pH and incubation temperature. Therefore, optimization of the growth factors to maximize Hib production can lead to 1) an increase in bacterial biomass and PRP productions, 2) lower vaccine prices, 3) vaccination of more susceptible populations, and 4) lower risk of Hib infections.

  6. Multi-condition optimization and experimental study of impeller blades in a mixed-flow pump

    Houlin Liu

    2016-05-01

    Full Text Available On the basis of design of experiment and numerical simulation, a reliable optimization method for blades of a mixed-flow pump is proposed with the maximum weighted average efficiency at multi-conditions as optimum objective. First, the performance of the model pump was measured and the test results were used to validate the simulation method. To improve the simulation accuracy, the check of the grid independence and the comparison of different turbulence models were done in detail. Then, the method of design of experiment for key geometrical parameters was used to obtain the optimization scheme. The maximum weighted average efficiency of pump at three operation conditions was chosen as optimum objective. The optimum solution was gotten and confirmed by the experiment. The results demonstrate that efficiency of the mixed-flow pump with optimized impeller increases by 3.9%, and the high-efficiency zone is increased from 0.021 to 0.040.

  7. Optimization of Photovoltaic Electrolyzer Hybrid systems; taking into account the effect of climate conditions

    Sayedin, Farid; Maroufmashat, Azadeh; Sattari, Sourena; Elkamel, Ali; Fowler, Michael

    2016-01-01

    Highlights: • The optimal size of directly coupled Photovoltaic–Electrolyzer (PV/EL) is studied. • The effect of climate condition on the performance of PV/EL is studied. • PV/EL energy transfer loss and the levelized cost of hydrogen production minimized. • The model is applied to locations with different climate and solar irradiations. • Solar to electricity/electricity to hydrogen/solar to hydrogen efficiencies are derived. - Abstract: Solar energy will make a valuable contribution for power generation in the future. However the intermittency of solar energy has become an important issue in the utilization of PV system, especially small scale distributed solar energy conversion systems. The issue can be addressed through the management of production and storage of the energy in the form of hydrogen. The hydrogen can be produced by solar photovoltaic (PV) powered electrolysis of water. The amount of transferred energy to an electrolyzer from a PV module is a function of the distance between maximum power points (MPP) of PV module and the electrolyzer operating points. The distance can be minimized by optimizing the number of series and parallel units of the electrolyzer. However the maximum power points are subject to PV module characteristics, solar irradiation and ambient temperature. This means the climate condition can substantially influence the MPP and therefore the optimal size of the PV–Electrolyzer (PV/EL) system. On the other hand, system size can affect the levelized cost of hydrogen production as well. In this paper, the impact of climate conditions on the optimal size and operating conditions of a direct coupled photovoltaic–electrolyzer system has been studied. For this purpose, the optimal size of electrolyzer for six cities which have different climate condition is obtained by considering two solution scenarios, regarding two objectives which are annual energy transfer loss and levelized costs of hydrogen production and then the

  8. Photophysiological variability of microphytobenthic diatoms after growth in different types of culture conditions

    Forster, R.M.; Martin-Jézéquel, V.R.

    2005-01-01

    Microphytobenthic diatoms have great ecological importance in estuarine and coastal marine ecosystenis, yet many aspects of their physiology have not been investigated under controlled conditions. This work describes patterns in growth rates and photosynthesis in different types of culture for

  9. Bacillus spp. from rainforest soil promote plant growth under limited nitrogen conditions.

    Huang, X-F; Zhou, D; Guo, J; Manter, D K; Reardon, K F; Vivanco, J M

    2015-03-01

    The aim of this study was to evaluate effects of PGPR (plant growth-promoting rhizobacteria) isolated from rainforest soil on different plants under limited nitrogen conditions. Bacterial isolates from a Peruvian rainforest soil were screened for plant growth-promoting effects on Arabidopsis (Col-0). Four selected isolates including one Bacillus subtilis, two B. atrophaeus and one B. pumilus significantly promoted growth of Zea mays L. and Solanum lycopersicum under greenhouse conditions. Moreover, the PGPRs significantly promoted growth of S. lycopersicum in both low and nitrogen-amended soil conditions. These PGPR strains were further studied to obtain insights into possible mechanisms of plant growth promotion. Volatile chemicals from those isolates promoted Arabidopsis growth, and the expression of genes related to IAA production was induced in the Arabidopsis plants treated with PGPRs. Further, selected PGPR strains triggered induced systemic resistance (ISR) against Pseudomonas syringae pv tomato DC3000 in Arabidopsis. PGPR strains isolated from the rainforest soil promoted the plant growth of Arabidopsis, corn and tomato. New PGPR that have wider adaptability to different crops, soils and environmental conditions are needed to decrease our reliance on agricultural amendments derived from fossil-based fuels. The PGPRs isolated from a nonagricultural site constitute new plant growth-promoting strains that could be developed for agricultural uses. © 2014 The Society for Applied Microbiology.

  10. High throughput nanostructure-initiator mass spectrometry screening of microbial growth conditions for maximal β-glucosidase production.

    Cheng, Xiaoliang; Hiras, Jennifer; Deng, Kai; Bowen, Benjamin; Simmons, Blake A; Adams, Paul D; Singer, Steven W; Northen, Trent R

    2013-01-01

    Production of biofuels via enzymatic hydrolysis of complex plant polysaccharides is a subject of intense global interest. Microbial communities are known to express a wide range of enzymes necessary for the saccharification of lignocellulosic feedstocks and serve as a powerful reservoir for enzyme discovery. However, the growth temperature and conditions that yield high cellulase activity vary widely, and the throughput to identify optimal conditions has been limited by the slow handling and conventional analysis. A rapid method that uses small volumes of isolate culture to resolve specific enzyme activity is needed. In this work, a high throughput nanostructure-initiator mass spectrometry (NIMS)-based approach was developed for screening a thermophilic cellulolytic actinomycete, Thermobispora bispora, for β-glucosidase production under various growth conditions. Media that produced high β-glucosidase activity were found to be I/S + glucose or microcrystalline cellulose (MCC), Medium 84 + rolled oats, and M9TE + MCC at 45°C. Supernatants of cell cultures grown in M9TE + 1% MCC cleaved 2.5 times more substrate at 45°C than at all other temperatures. While T. bispora is reported to grow optimally at 60°C in Medium 84 + rolled oats and M9TE + 1% MCC, approximately 40% more conversion was observed at 45°C. This high throughput NIMS approach may provide an important tool in discovery and characterization of enzymes from environmental microbes for industrial and biofuel applications.

  11. High throughput nanostructure-initiator mass spectrometry screening of microbial growth conditions for maximal β-glucosidase production

    Xiaoliang eCheng

    2013-12-01

    Full Text Available Production of biofuels via enzymatic hydrolysis of complex plant polysaccharides is a subject of intense global interest. Microbial communities are known to express a wide range of enzymes necessary for the saccharification of lignocellulosic feedstocks and serve as a powerful reservoir for enzyme discovery. However, the growth temperature and conditions that yield high cellulase activity vary widely, and the throughput to identify optimal conditions has been limited by the slow handling and conventional analysis. A rapid method that uses small volumes of isolate culture to resolve specific enzyme activity is needed. In this work, a high throughput nanostructure-initiator mass spectrometry (NIMS based approach was developed for screening a thermophilic cellulolytic actinomycete, Thermobispora bispora, for β-glucosidase production under various growth conditions. Media that produced high β-glucosidase activity were found to be I/S + glucose or microcrystalline cellulose (MCC, Medium 84 + rolled oats, and M9TE + MCC at 45 °C. Supernatants of cell cultures grown in M9TE + 1% MCC cleaved 2.5 times more substrate at 45 °C than at all other temperatures. While T. bispora is reported to grow optimally at 60 °C in Medium 84 + rolled oats and M9TE + 1% MCC, approximately 40% more conversion was observed at 45 °C. This high throughput NIMS approach may provide an important tool in discovery and characterization of enzymes from environmental microbes for industrial and biofuel applications.

  12. Evaluating Maximum Photovoltaic Integration in District Distribution Systems Considering Optimal Inverter Dispatch and Cloud Shading Conditions

    Ding, Tao; Kou, Yu; Yang, Yongheng

    2017-01-01

    . However, the intermittency of solar PV energy (e.g., due to passing clouds) may affect the PV generation in the district distribution network. To address this issue, the voltage magnitude constraints under the cloud shading conditions should be taken into account in the optimization model, which can...

  13. On sharp necessary optimality conditions in control of contact problems with strings

    Jarušek, Jiří; Outrata, Jiří

    2007-01-01

    Roč. 64, č. 4 (2007), s. 1117-1128 ISSN 0362-546X R&D Projects: GA AV ČR IAA1075402 Institutional research plan: CEZ:AV0Z10190503; CEZ:AV0Z10750506 Keywords : equilibrium constraints * optimality conditions * Fréchet normals Subject RIV: BA - General Mathematics Impact factor: 1.097, year: 2007

  14. Characterization and optimization of cathodic conditions for H2O2 synthesis in microbial electrochemical cells

    Cathode potential and O2 supply methods were investigated to improve H2O2 synthesis in an electrochemical cell, and optimal cathode conditions were applied for microbial electrochemical cells (MECs). Using aqueous O2 for the cathode significantly improved current density, but H2...

  15. Simulation-Based Planning of Optimal Conditions for Industrial Computed Tomography

    Reisinger, S.; Kasperl, S.; Franz, M.

    2011-01-01

    We present a method to optimise conditions for industrial computed tomography (CT). This optimisation is based on a deterministic simulation. Our algorithm finds task-specific CT equipment settings to achieve optimal exposure parameters by means of an STL-model of the specimen and a raytracing...

  16. Optimization of Synthesis Condition for Nanoscale Zero Valent Iron Immobilization on Granular Activated Carbon

    Mines, Paul D.; Andersen, Henrik Rasmus; Hwang, Yuhoon

    2016-01-01

    economical loss, but also potential risk to human health and environment. Thus, the immobilization onto coarse or structured support is essential. In this study, two representative processes for nZVI immobilization on granular activated carbon (GAC) were evaluated, and optimized conditions for synthesizing...

  17. Necessary and Sufficient Conditions for Pareto Optimality in Infinite Horizon Cooperative Differential Games

    Reddy, P.V.; Engwerda, J.C.

    2011-01-01

    In this article we derive necessary and sufficient conditions for the existence of Pareto optimal solutions for infinite horizon cooperative differential games. We consider games defined by non autonomous and discounted autonomous systems. The obtained results are used to analyze the regular

  18. The Optimal Conditions for Form-Focused Instruction: Method, Target Complexity, and Types of Knowledge

    Kim, Jeong-eun

    2012-01-01

    This dissertation investigates optimal conditions for form-focused instruction (FFI) by considering effects of internal (i.e., timing and types of FFI) and external (i.e., complexity and familiarity) variables of FFI when it is offered within a primarily meaning-focused context of adult second language (L2) learning. Ninety-two Korean-speaking…

  19. An endogenous Taylor condition in an endogenous growth monetary policy model

    Le, Mai Vo; Gillman, Max; Minford, Patrick

    2007-01-01

    The paper derives a Taylor condition as part of the agent's equilibrium behavior in an endogenous growth monetary economy. It shows the assumptions necessary to make it almost identical to the original Taylor rule, and that it can interchangably take a money supply growth rate form. From the money supply form, simple policy experiments are conducted. A full central bank policy model is derived that includes the Taylor condition along with equations comparable to the standard aggregate-demand/...

  20. Quantitative approach for optimizing e-beam condition of photoresist inspection and measurement

    Lin, Chia-Jen; Teng, Chia-Hao; Cheng, Po-Chung; Sato, Yoshishige; Huang, Shang-Chieh; Chen, Chu-En; Maruyama, Kotaro; Yamazaki, Yuichiro

    2018-03-01

    Severe process margin in advanced technology node of semiconductor device is controlled by e-beam metrology system and e-beam inspection system with scanning electron microscopy (SEM) image. By using SEM, larger area image with higher image quality is required to collect massive amount of data for metrology and to detect defect in a large area for inspection. Although photoresist is the one of the critical process in semiconductor device manufacturing, observing photoresist pattern by SEM image is crucial and troublesome especially in the case of large image. The charging effect by e-beam irradiation on photoresist pattern causes deterioration of image quality, and it affect CD variation on metrology system and causes difficulties to continue defect inspection in a long time for a large area. In this study, we established a quantitative approach for optimizing e-beam condition with "Die to Database" algorithm of NGR3500 on photoresist pattern to minimize charging effect. And we enhanced the performance of measurement and inspection on photoresist pattern by using optimized e-beam condition. NGR3500 is the geometry verification system based on "Die to Database" algorithm which compares SEM image with design data [1]. By comparing SEM image and design data, key performance indicator (KPI) of SEM image such as "Sharpness", "S/N", "Gray level variation in FOV", "Image shift" can be retrieved. These KPIs were analyzed with different e-beam conditions which consist of "Landing Energy", "Probe Current", "Scanning Speed" and "Scanning Method", and the best e-beam condition could be achieved with maximum image quality, maximum scanning speed and minimum image shift. On this quantitative approach of optimizing e-beam condition, we could observe dependency of SEM condition on photoresist charging. By using optimized e-beam condition, measurement could be continued on photoresist pattern over 24 hours stably. KPIs of SEM image proved image quality during measurement and

  1. Theoretical Aspects Regarding the Optimal Taxation of Effort With More Conditions

    Prof. Dumitru MARIN PhD

    2017-09-01

    Full Text Available In this article, the authors propose to conduct a pertinent analysis of the use of mathematical models in relation to optimal effort taxation. The effort taxation must be a balance between allocative efficiency and distribution. It is a question of determining the optimal tax level for three conditions. The theory is that the shift to a fixed amount, a single share, is not feasible for wage compensation, being important to note that this condition is one that must be considered. The mathematical model proposed by the authors regarding optimal taxation of multi-condition effort is relevant and suggestive for the analysis. It is well known that, in order to increase tax revenue, they must inevitably be based on the unobservable variant, which is the potential gain or, most importantly, on the individual productivity of labor. Solving a problem of this sensibility, such as the optimal taxation of multi-state effort, needs to be analyzed and conditioned by the establishment of a mathematical-econometric model that highlights both the aspects of a minimum expectation threshold or a situation that depends on the economic outcome. The authors consider the existing variants and establish variants based on a mathematical model that is analyzed to best answer the problem of the adverse selection ie the balance between allocation efficiency and distribution. We analyze the optimization problem from Lagrange’s function and associated multiplier, highlighting the mathematical functions that can be used. Further, the authors consider the case of adverse selection based on asymmetric information. For the objective function and budget constraint, the authors consider that they need to add incentive restrictions, especially when they are taxed on income. By analyzing this hypothesis in depth, the authors propose and demonstrate a mathematical function that best suits these adjustment needs and solve the adverse selection. The way in which the authors suggest

  2. Optimal replenishment policy for fuzzy inventory model with deteriorating items and allowable shortages under inflationary conditions

    Jaggi Chandra K.

    2016-01-01

    Full Text Available This study develops an inventory model to determine ordering policy for deteriorating items with constant demand rate under inflationary condition over a fixed planning horizon. Shortages are allowed and are partially backlogged. In today’s wobbling economy, especially for long term investment, the effects of inflation cannot be disregarded as uncertainty about future inflation may influence the ordering policy. Therefore, in this paper a fuzzy model is developed that fuzzify the inflation rate, discount rate, deterioration rate, and backlogging parameter by using triangular fuzzy numbers to represent the uncertainty. For Defuzzification, the well known signed distance method is employed to find the total profit over the planning horizon. The objective of the study is to derive the optimal number of cycles and their optimal length so to maximize the net present value of the total profit over a fixed planning horizon. The necessary and sufficient conditions for an optimal solution are characterized. An algorithm is proposed to find the optimal solution. Finally, the proposed model has been validated with numerical example. Sensitivity analysis has been performed to study the impact of various parameters on the optimal solution, and some important managerial implications are presented.

  3. Influence of the growth conditions on the optical and structural properties of self-assembled InAs/GaAs quantum dots for low As/In ratio

    Ozdemir, Samet; Suyolcu, Y. Eren [Advanced Technologies Research Unit: Nanotechnology, Graduate School of Sciences, Anadolu University, Yunusemre Campus, 26470 Eskisehir (Turkey); Turan, Servet [Department of Materials Science and Engineering, Anadolu University, Iki Eylul Campus, 26555 Eskisehir (Turkey); Aslan, Bulent, E-mail: bulentaslan@anadolu.edu.tr [Department of Physics, Anadolu University, Yunusemre Campus, 26470 Eskisehir (Turkey)

    2017-01-15

    Highlights: • Effects of systematically changed growth conditions on InAs/GaAs QDs were studied. • Growths were optimized for low As/In flux ratio to obtain well-resolved PL spectra. • XRD rocking curve signal fitting was used to analyze the samples. • XRD analysis reflects the overall tendency of the QD density and WL behavior. - Abstract: We report on the growth and characterization of self-assembled InAs/GaAs quantum dots (QDs). The influence of the systematically changed growth conditions on the opto-electronic and structural properties of the QDs were investigated. Combination of the amount of the deposited InAs, growth temperature and growth rate were optimized for low As/In flux ratio to obtain well-resolved ground and excited states in the low temperature photoluminescence (PL) spectra. SEM and TEM techniques were also used for the characterization of QDs. The results were evaluated simply through the conservation of mass approximation and the x-ray diffraction measurements with fitted curves. The extracted InAs and wetting layer thicknesses were brought out that the XRD analysis reflects the overall tendency of the QD density change and WL behaviors in response to the changes in growth conditions.

  4. Optimization of the thermal conditions for processing hatchery waste eggs as meal for feed.

    Chiu, W Z; Wei, H W

    2011-05-01

    The purpose of this study was to optimize the thermal conditions for processing hatchery waste eggs (HWE) into rich feedstuff with lower electricity consumption by using response surface methodology. In the study, the effects of processing temperature and time on HWE meal (HWEM) quality and production were evaluated. As the results indicate, optimization was obtained when the processing lasted for 23 h at the fixed temperature of 65°C, resulting in higher protein digestibility in vitro (89.6%) and DM (88.5%) content of HWEM with lower electricity consumption (82.4 kWh/60 kg of HWE). No significant differences existed between the quality values predicted by mathematical formulae and those obtained through practical analyses in DM (87 vs. 88.5%), CP (39.2 vs. 38.3%), protein digestibility in vitro (90.7 vs. 89.6%), and electricity consumed (80.8 vs. 82.4 kWh/60 kg of HWE). Furthermore, the product derived from the optimized processing conditions had better biosecurity; Salmonella spp. were not found and Escherichia coli levels were substantially reduced (from 10(7) to 10(4) cfu/g). In summary, HWEM of superior quality can be produced when the processing conditions optimized in the current research are utilized.

  5. A review on condition-based maintenance optimization models for stochastically deteriorating system

    Alaswad, Suzan; Xiang, Yisha

    2017-01-01

    Condition-based maintenance (CBM) is a maintenance strategy that collects and assesses real-time information, and recommends maintenance decisions based on the current condition of the system. In recent decades, research on CBM has been rapidly growing due to the rapid development of computer-based monitoring technologies. Research studies have proven that CBM, if planned properly, can be effective in improving equipment reliability at reduced costs. This paper presents a review of CBM literature with emphasis on mathematical modeling and optimization approaches. We focus this review on important aspects of the CBM, such as optimization criteria, inspection frequency, maintenance degree, solution methodology, etc. Since the modeling choice for the stochastic deterioration process greatly influences CBM strategy decisions, this review classifies the literature on CBM models based on the underlying deterioration processes, namely discrete- and continuous-state deterioration, and proportional hazard model. CBM models for multi-unit systems are also reviewed in this paper. This paper provides useful references for CBM management professionals and researchers working on CBM modeling and optimization. - Highlights: • A review on Condition-based maintenance (CBM) optimization models is presented. • The CBM models are classified based on the underlying deterioration processes. • Existing CBM models for both single- and multi-unit systems are reviewed. • Future essential research directions on CBM are identified.

  6. Diatom production in the marine environment : implications for larval fish growth and condition

    St. John, Michael; Clemmesen, C.; Lund, T.

    2001-01-01

    To test the effects of diatom production on larval fish growth and condition. laboratory experiments were performed with larval North Sea cod reared on different algal food chains. These food chains were based on cultures of (a) the diatoms Skeletonema costatum and Thalassiosira weissflogii: (b....../omega6 fatty acids in the algal source had no significant effect. The highest and lowest growth rates were observed in food chains based on H. triquetra and T. weissflogii. respectively (means for days 14-16 of 4.0 and - 4.7). The mixed diatom/dinoflagellate diet resulted in inter- mediate growth rates...... and condition. Regressions of growth rates against EPA and DHA content indicated no inhibitory effect of diatom production on growth in larval cod...

  7. [Is it possible to "cancel" aging process of cell cultures under optimal conditions for cultivation?].

    Bozhkov, A I; Kovaleva, M K; Menzianova, N G

    2011-01-01

    The characteristics of the cells epigenotypes Dunaliella viridis Teod. in the process of chronological and replicative aging were investigated. By 40th day of accumulative cultivation (which coincided with the stationary growth phase) DNA content in the cells of Dunaliella viridis increased 2 times, triacylglycerides 3 times, beta-carotene and carbonyl proteins 2 times, RNA content decreased in comparison with cells in exponential growth phase, i. e., the 40th day of growth of culture forms the age-related epigenotype. 4 received subcultures were being transplanted during 2 years in mid-logarithmic growth phase (subculture-10), early stationary phase of growth (subculture-20), in the mid-stationary growth phase (subculture-30), and late stationary growth phase (subculture-40). It is shown that epigenotype of subculture-10 remained unchanged over 2 years of cultivation, i. e., it does not manifest replicative aging. At the same time, the subculture-20, although long enough (at least 40 passages), maintained epigenotype characteristic of young cultures, and showed age-related changes. Pronounced age-dependent changes of epigenotype in the course of cultivation were identified for subculture-30, and subculture-40 was characterized by unstable epigenotype. Thus, cultivation conditions determine the intensity of replicative aging in Dunaliella viridis.

  8. Evaluating Maximum Photovoltaic Integration in District Distribution Systems Considering Optimal Inverter Dispatch and Cloud Shading Conditions

    Ding, Tao; Kou, Yu; Yang, Yongheng

    2017-01-01

    . However, the intermittency of solar PV energy (e.g., due to passing clouds) may affect the PV generation in the district distribution network. To address this issue, the voltage magnitude constraints under the cloud shading conditions should be taken into account in the optimization model, which can......As photovoltaic (PV) integration increases in distribution systems, to investigate the maximum allowable PV integration capacity for a district distribution system becomes necessary in the planning phase, an optimization model is thus proposed to evaluate the maximum PV integration capacity while...

  9. Optimization of culture conditions for gamma-aminobutyric acid production in fermented adzuki bean milk

    Hung Yi Song

    2018-01-01

    Full Text Available γ-Aminobutyric acid (GABA, a nonprotein amino acid, is widely distributed in nature and fulfills several physiological functions. In this study, various lactic acid strains commonly used to produce fermented milk products were inoculated into adzuki bean milk for producing GABA. The high GABA producing strain was selected in further experiment to improve the GABA production utilizing culture medium optimization. The results demonstrated that adzuki bean milk inoculated with Lactobacillus rhamnosus GG increased GABA content from 0.05 mg/mL to 0.44 mg/mL after 36 hours of fermentation, which showed the greatest elevation in this study. Furthermore, the optimal cultural condition to adzuki bean milk inoculated with L. rhamnosus GG to improve the GABA content was performed using response surface methodology. The results showed that GABA content was dependent on the addition of galactose, monosodium glutamate, and pyridoxine with which the increasing ratios of GABA were 23–38%, 24–68%, and 8–36%, respectively. The optimal culture condition for GABA production of adzuki bean milk was found at the content of 1.44% galactose, 2.27% monosodium glutamate, and 0.20% pyridoxine. Under the optimal cultural condition, the amount of GABA produced in the fermented adzuki bean milk was 1.12 mg/mL, which was 22.4-fold higher than that of the unfermented adzuki bean milk (0.05 mg/100 mL. The results suggested that the optimized cultural condition of adzuki bean milk inoculated with L. rhamnosus GG can increase GABA content for consumers as a daily supplement as suggested.

  10. Crack growth under combined creep and fatigue conditions in alloy 800

    Pfaffelhuber, M.; Roedig, M.; Schubert, F.; Nickel, H.

    1989-08-01

    To investigate the crack growth behaviour under combined creep-fatigue loading, CT 25 mm-specimens of X10NiCrAlTi 32 20 (Alloy 800) have been tested in experiments with cyclic loadings and hold times, with static loadings and short stress rekief interrupts, with ramp type loadings and with sequences of separate fatigue and creep crack growth periods. The test temperature of 700deg C was selected because only in this temperature range this alloy provides similar amounts of crack growth under creep and fatigue conditions due to equivalent stress levels. For the estimation of crack growth under combined loading conditions a linear accumulation of increase in crack length was proved using the crack growth laws of pure creep and fatigue crack growth. Hold time and ramp loadings lead to a higher crack growth rate compared with pure creep or pure fatigue crack growth tests. In hold time experiments the crack growth rate is higher than ramp tests of the same period time. The results of hold time tests can be fairly enough predicted by linear damage accumulation rules. (orig.) [de

  11. Growth of AlGaN under the conditions of significant gallium evaporation: phase separation and enhanced lateral growth

    Mayboroda, I. O.; Knizhnik, A. A.; Grishchenko, Yu. V.; Ezubchenko, I. S.; Zanaveskin, Maxim L.; Presniakov, M. Yu.; Potapkin, B. V.; Ilyin, V. A.

    2017-01-01

    Growth kinetics of AlGaN in NH3 MBE under significant Ga desorption was studied. It was found that the addition of gallium stimulates 2D growth and provides better morphology of films compared to pure AlN. The effect was experimentally observed at up to 98% desorption of the impinging gallium. We found that, under the conditions of significant thermal desorption, larger amounts of gallium were retained at lateral boundaries of 3D surface features than at flat terraces because of the higher bi...

  12. Effects of culture conditions on the growth and reproduction of Gut Weed, Ulva intestinalis Linnaeus (Ulvales, Chlorophyta

    Rapeeporn Ruangchuay

    2012-11-01

    Full Text Available In vitro cultivation of Gut Weed, Ulva intestinalis Linnaeus, was experimentally studied to support its near optimalfarming, with potential impact in Thailand on its direct use as human food or its co-cultures in shrimp farming.Germling clusters (2 weeks old and 7.50±2.98 mm long were seeded into 500 mL flasks and biomass growth rateoptimized with respect to the main controllable factors; seedling density, salinity, light intensity, and temperature. These factorswere assumed to each have an optimal value independent of the others, and the factors were optimized one at a time. Themaximum growth at three to four weeks of cultivation was obtained at the factor levels of 0.05 gL-1, 20 ppt, 80 mol photonm-2s-1 and 25°C. Early zoosporangia were obtained from 2nd to 4th weeks. The relative growth rate ranged from 9.47 to 22.18 %day-1, and only asexual reproduction of U. intestinalis was observed under these culture conditions.

  13. Optimal Therapeutic Strategy for Non-small Cell Lung Cancer with Mutated Epidermal Growth Factor Receptor

    Zhong SHI

    2015-02-01

    Full Text Available Although epidermal growth factor receptor tyrosine kinase inhibitors (EGFR-TKIs have been widely used in non-small cell lung cancer (NSCLC patients, it is still controversial about how to combine EGFR-TKI with chemotherapy and other targeted drugs. We have made a summary on the current therapeutic models of EGFR-TKI combined with chemotherapy/bevacizumab in this review and aimed to find the optimal therapeutic strategy for NSCLC patients with EGFR mutation.

  14. Distinct age and differentiation-state dependent metabolic profiles of oligodendrocytes under optimal and stress conditions.

    Vijayaraghava T S Rao

    Full Text Available Within the microenvironment of multiple sclerosis lesions, oligodendrocytes are subject to metabolic stress reflecting effects of focal ischemia and inflammation. Previous studies have shown that under optimal conditions in vitro, the respiratory activity of human adult brain-derived oligodendrocytes is lower and more predominantly glycolytic compared to oligodendrocytes differentiated in vitro from post natal rat brain oligodendrocyte progenitor cells. In response to sub-lethal metabolic stress, adult human oligodendrocytes reduce overall energy production rate impacting the capacity to maintain myelination. Here, we directly compare the metabolic profiles of oligodendrocytes derived from adult rat brain with oligodendrocytes newly differentiated in vitro from oligodendrocyte progenitor cells obtained from the post natal rat brain, under both optimal culture and metabolic stress (low/no glucose conditions. Oxygen consumption and extracellular acidification rates were measured using a Seahorse extracellular flux analyzer. Our findings indicate that under optimal conditions, adult rat oligodendrocytes preferentially use glycolysis whereas newly differentiated post natal rat oligodendrocytes, and the oligodendrocyte progenitor cells from which they are derived, mainly utilize oxidative phosphorylation to produce ATP. Metabolic stress increases the rate of ATP production via oxidative phosphorylation and significantly reduces glycolysis in adult oligodendrocytes. The rate of ATP production was relatively unchanged in newly differentiated post natal oligodendrocytes under these stress conditions, while it was significantly reduced in oligodendrocyte progenitor cells. Our study indicates that both age and maturation influence the metabolic profile under optimal and stressed conditions, emphasizing the need to consider these variables for in vitro studies that aim to model adult human disease.

  15. The optimal atmospheric CO2 concentration for the growth of winter wheat (Triticum aestivum).

    Xu, Ming

    2015-07-20

    This study examined the optimal atmospheric CO2 concentration of the CO2 fertilization effect on the growth of winter wheat with growth chambers where the CO2 concentration was controlled at 400, 600, 800, 1000, and 1200 ppm respectively. I found that initial increase in atmospheric CO2 concentration dramatically enhanced winter wheat growth through the CO2 fertilization effect. However, this CO2 fertilization effect was substantially compromised with further increase in CO2 concentration, demonstrating an optimal CO2 concentration of 889.6, 909.4, and 894.2 ppm for aboveground, belowground, and total biomass, respectively, and 967.8 ppm for leaf photosynthesis. Also, high CO2 concentrations exceeding the optima not only reduced leaf stomatal density, length and conductance, but also changed the spatial distribution pattern of stomata on leaves. In addition, high CO2 concentration also decreased the maximum carboxylation rate (Vc(max)) and the maximum electron transport rate (J(max)) of leaf photosynthesis. However, the high CO2 concentration had little effect on leaf length and plant height. The optimal CO2 fertilization effect found in this study can be used as an indicator in selecting and breeding new wheat strains in adapting to future high atmospheric CO2 concentrations and climate change. Copyright © 2015. Published by Elsevier GmbH.

  16. Simulation of microcirculatory hemodynamics: estimation of boundary condition using particle swarm optimization.

    Pan, Qing; Wang, Ruofan; Reglin, Bettina; Fang, Luping; Pries, Axel R; Ning, Gangmin

    2014-01-01

    Estimation of the boundary condition is a critical problem in simulating hemodynamics in microvascular networks. This paper proposed a boundary estimation strategy based on a particle swarm optimization (PSO) algorithm, which aims to minimize the number of vessels with inverted flow direction in comparison to the experimental observation. The algorithm took boundary values as the particle swarm and updated the position of the particles iteratively to approach the optimization target. The method was tested in a real rat mesenteric network. With random initial boundary values, the method achieved a minimized 9 segments with an inverted flow direction in the network with 546 vessels. Compared with reported literature, the current work has the advantage of a better fit with experimental observations and is more suitable for the boundary estimation problem in pulsatile hemodynamic models due to the experiment-based optimization target selection.

  17. Sufficient conditions for optimality for a mathematical model of drug treatment with pharmacodynamics

    Maciej Leszczyński

    2017-01-01

    Full Text Available We consider an optimal control problem for a general mathematical model of drug treatment with a single agent. The control represents the concentration of the agent and its effect (pharmacodynamics is modelled by a Hill function (i.e., Michaelis-Menten type kinetics. The aim is to minimize a cost functional consisting of a weighted average related to the state of the system (both at the end and during a fixed therapy horizon and to the total amount of drugs given. The latter is an indirect measure for the side effects of treatment. It is shown that optimal controls are continuous functions of time that change between full or no dose segments with connecting pieces that take values in the interior of the control set. Sufficient conditions for the strong local optimality of an extremal controlled trajectory in terms of the existence of a solution to a piecewise defined Riccati differential equation are given.

  18. Artificial Plant Root System Growth for Distributed Optimization: Models and Emergent Behaviors

    Su Weixing

    2016-01-01

    Full Text Available Plant root foraging exhibits complex behaviors analogous to those of animals, including the adaptability to continuous changes in soil environments. In this work, we adapt the optimality principles in the study of plant root foraging behavior to create one possible bio-inspired optimization framework for solving complex engineering problems. This provides us with novel models of plant root foraging behavior and with new methods for global optimization. This framework is instantiated as a new search paradigm, which combines the root tip growth, branching, random walk, and death. We perform a comprehensive simulation to demonstrate that the proposed model accurately reflects the characteristics of natural plant root systems. In order to be able to climb the noise-filled gradients of nutrients in soil, the foraging behaviors of root systems are social and cooperative, and analogous to animal foraging behaviors.

  19. Model Based Optimal Sensor Network Design for Condition Monitoring in an IGCC Plant

    Kumar, Rajeeva; Kumar, Aditya; Dai, Dan; Seenumani, Gayathri; Down, John; Lopez, Rodrigo

    2012-12-31

    This report summarizes the achievements and final results of this program. The objective of this program is to develop a general model-based sensor network design methodology and tools to address key issues in the design of an optimal sensor network configuration: the type, location and number of sensors used in a network, for online condition monitoring. In particular, the focus in this work is to develop software tools for optimal sensor placement (OSP) and use these tools to design optimal sensor network configuration for online condition monitoring of gasifier refractory wear and radiant syngas cooler (RSC) fouling. The methodology developed will be applicable to sensing system design for online condition monitoring for broad range of applications. The overall approach consists of (i) defining condition monitoring requirement in terms of OSP and mapping these requirements in mathematical terms for OSP algorithm, (ii) analyzing trade-off of alternate OSP algorithms, down selecting the most relevant ones and developing them for IGCC applications (iii) enhancing the gasifier and RSC models as required by OSP algorithms, (iv) applying the developed OSP algorithm to design the optimal sensor network required for the condition monitoring of an IGCC gasifier refractory and RSC fouling. Two key requirements for OSP for condition monitoring are desired precision for the monitoring variables (e.g. refractory wear) and reliability of the proposed sensor network in the presence of expected sensor failures. The OSP problem is naturally posed within a Kalman filtering approach as an integer programming problem where the key requirements of precision and reliability are imposed as constraints. The optimization is performed over the overall network cost. Based on extensive literature survey two formulations were identified as being relevant to OSP for condition monitoring; one based on LMI formulation and the other being standard INLP formulation. Various algorithms to solve

  20. Growth Characterization and Optimization of Cyanobacterial Isolates from the Arabian Gulf

    Siller Rodriguez, Luis F.

    2013-12-01

    Photoautotrophic organisms have been highlighted as carbon capture and conversion platforms for sustainable production of agricultural and chemicals in KSA. Previously two cyanobacterial strains, Geitlerinema spp. CT7801 and CT7802, were isolated from an industrial brine outfall site in the Eastern Province of the Kingdom of Saudi Arabia. Initial characterization of their growth characteristics showed growth at high temperature (38 ºC) and high salinity ( > 60 PSU), making them potentially good candidates for industrial applications. In this study, quantitative growth assays were performed using standardized methods developed for the analysis of Red Sea photosynthetic microorganisms supported by microscopic observations, optimal growth media preference assays, CO2 concentration effect, photoperiod effect, mixotrophic and heterotrophic growth tests. Data was recorded for absorbance (600 and 750 nm wave lenght), dry cell weight (DCW), colorimetric observations, and chlorophyll a content. Both CT7801 and CT7802 exhibited a clear preference for Walne\\'s Red Sea medium. An analysis on media composition highlights B and Fe as growth enhancers, as well as a base requirement of seawater. Tests on the effect of supplied concentration of CO2 showed that air enhanced with 1 % v/v CO2 allows approximately 2-fold increase in DCW for Geitlerinema spp. CT7802. Photoperiod tests showed that continuous light is disadvantageous for phototrophic growth of Geitlerinema spp. CT7801 and CT7802. Results for mixotrophic and heterotrophic growth of Geitlerinema spp. CT7801 and CT7802 revealed their ability to metabolize glycerol. Analysis on the complete genome of CT7802 identified three key enzymes, glycerol kinase, glycerol-3-phosphate dehydrogenase and triosephosphate isomerase, which may catalyze the glycerol metabolic pathway in the strain. Utilization of glycerol, a residue of the biodiesel industry, might provide a sustainable alternative for growth of Geitlerinema sp. CT7802.

  1. Optimization of Combine Heat and Power Plants in the Russian Wholesale Power Market Conditions

    I. A. Chuchueva

    2015-01-01

    Full Text Available The paper concerns the relevant problem to optimize the combine heat and power (CHP plants in the Russian wholesale power market conditions. Since 1975 the CHP plants specialists faced the problem of fuel rate or fuel cost reduction while ensuring the fixed level of heat and power production. The optimality criterion was the fuel rate or fuel cost which has to be minimized. Produced heat and power was paid by known tariff. Since the power market started in 2006 the power payment scheme has essentially changed: produced power is paid by market price. In such condition a new optimality criterion the paper offers is a profit which has to be maximized for the given time horizon. Depending on the optimization horizon the paper suggests four types of the problem urgency, namely: long-term, mid-term, short-term, and operative optimization. It clearly shows that the previous problem of fuel cost minimization is a special case of profit maximization problem. To bring the problem to the mixed-integer linear programming problem a new linear characteristic curves of steam and gas turbine are introduced. Error of linearization is 0.6%. The formal statement of the problem of short-term CHP plants optimization in the market conditions is offered. The problem was solved with IRM software (OpenLinkInternational for seven power plants of JSC “Quadra”: Dyagilevskaya CHP, Kurskaya CHP-1, Lipetskaya CHP-2, Orlovskaya CHP, Kurskaya CHP NWR, Tambovskaya CHP, and Smolenskaya CHP-2.The conducted computational experiment showed that a potential profit is between 1.7% and 4.7% of the fuel cost of different CHP plants and depends on the power plant operation conditions. The potential profit value is 2–3 times higher than analogous estimations, which were obtained solving fuel cost minimization problem. The perspectives of the work are formalization of mid-term and long-term CHP plants optimization problem and development of domestic software for the new problem

  2. Lettuce and rhizosphere microbiome responses to growth promoting Pseudomonas species under field conditions.

    Cipriano, Matheus A P; Lupatini, Manoeli; Lopes-Santos, Lucilene; da Silva, Márcio J; Roesch, Luiz F W; Destéfano, Suzete A L; Freitas, Sueli S; Kuramae, Eiko E

    2016-12-01

    Plant growth promoting rhizobacteria are well described and recommended for several crops worldwide. However, one of the most common problems in research into them is the difficulty in obtaining reproducible results. Furthermore, few studies have evaluated plant growth promotion and soil microbial community composition resulting from bacterial inoculation under field conditions. Here we evaluated the effect of 54 Pseudomonas strains on lettuce (Lactuca sativa) growth. The 12 most promising strains were phylogenetically and physiologically characterized for plant growth-promoting traits, including phosphate solubilization, hormone production and antagonism to pathogen compounds, and their effect on plant growth under farm field conditions. Additionally, the impact of beneficial strains on the rhizospheric bacterial community was evaluated for inoculated plants. The strains IAC-RBcr4 and IAC-RBru1, with different plant growth promoting traits, improved lettuce plant biomass yields up to 30%. These two strains also impacted rhizosphere bacterial groups including Isosphaera and Pirellula (phylum Planctomycetes) and Acidothermus, Pseudolabrys and Singusphaera (phylum Actinobacteria). This is the first study to demonstrate consistent results for the effects of Pseudomonas strains on lettuce growth promotion for seedlings and plants grown under tropical field conditions. © FEMS 2016. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  3. The effect of growth conditions on flavonols and anthocyanins accumulation in green and red lettuce

    Klaudia BRÜCKOVÁ; Oksana SYTAR; Marek ŢIVČÁK; Marian BRESTIC; Aleš LEBEDA

    2016-01-01

    The aim of the study was to investigate the effect of different growth conditions on anthocyanins and flavonols accumulation in leaves of green and red loose leaf lettuce (Lactuca sativa var. crispa). Lettuce plants were grown in three types of conditions, in greenhouse (I. variant), behind clear glass in field (II. variant) and in open field conditions (III. variant). Estimation of anthocyanins and flavonols content was done by non-destructive measurements with optical fluorescence sensor Mu...

  4. Use of Phytone Peptone to Optimize Growth and Cell Density of Lactobacillus reuteri.

    Atilola, Olabiyi A; Gyawali, Rabin; Aljaloud, Sulaiman O; Ibrahim, Salam A

    2015-08-10

    The objective of this study was to determine the use of phytone peptone to optimize the growth and cell density of Lactobacillus reuteri. Four strains of L. reuteri (DSM 20016, SD 2112, CF 2-7F, and MF 2-3,) were used in this study. An overnight culture of individual strains was inoculated into fresh basal media with various protein sources (peptone, tryptone, proteose peptone #3, phytone peptone, tryptic soy broth, yeast extract, and beef extract). Samples were then mixed well and incubated at 37 °C for 15 h. Bacterial growth was monitored by measuring turbidity (optical density 610 nm) at different time intervals during the incubation period. At the end of incubation, samples were plated on de-Man Rogosa Sharpe (MRS) agar to determine the bacterial population. Our results showed that phytone peptone promoted the growth of L. reuteri ( p reuteri .

  5. PARTICLE SWARM OPTIMIZATION BASED OF THE MAXIMUM PHOTOVOLTAIC POWER TRACTIOQG UNDER DIFFERENT CONDITIONS

    Y. Labbi

    2015-08-01

    Full Text Available Photovoltaic electricity is seen as an important source of renewable energy. The photovoltaic array is an unstable source of power since the peak power point depends on the temperature and the irradiation level. A maximum peak power point tracking is then necessary for maximum efficiency.In this work, a Particle Swarm Optimization (PSO is proposed for maximum power point tracker for photovoltaic panel, are used to generate the optimal MPP, such that solar panel maximum power is generated under different operating conditions. A photovoltaic system including a solar panel and PSO MPP tracker is modelled and simulated, it has been has been carried out which has shown the effectiveness of PSO to draw much energy and fast response against change in working conditions.

  6. 'Massfunktionen' as limit conditions of an optimization scheme for the telecobalt therapy

    Kirsch, M.; Forth, E.; Schumann, E.

    1978-01-01

    The basic ideas of the 'Score-Funktionen-Modell' of Hope and his collaborators are used for the establishment of the first stage of an optimization scheme for the telecobalt therapy. The new 'Massfunktionen' for the telecobalt therapy are limit conditions for the criterion of the optimum, i.e. the dose distribution in a body section. The 'Massfunktionen' are an analytic registration of parameters for the dose distribution such as dose homogeneity in the focal region and sparing of the subcutaneous tissues, the radiosensitive organs and the sound surroundings of the tumor. The functions are derived from the dose conditions in the irradiated body section. At the actual stage of development of the optimization scheme, these functions allow to decide whether an irradiation scheme is acceptable or not. (orig.) [de

  7. An Optimization Method for Condition Based Maintenance of Aircraft Fleet Considering Prognostics Uncertainty

    Qiang Feng

    2014-01-01

    Full Text Available An optimization method for condition based maintenance (CBM of aircraft fleet considering prognostics uncertainty is proposed. The CBM and dispatch process of aircraft fleet is analyzed first, and the alternative strategy sets for single aircraft are given. Then, the optimization problem of fleet CBM with lower maintenance cost and dispatch risk is translated to the combinatorial optimization problem of single aircraft strategy. Remain useful life (RUL distribution of the key line replaceable Module (LRM has been transformed into the failure probability of the aircraft and the fleet health status matrix is established. And the calculation method of the costs and risks for mission based on health status matrix and maintenance matrix is given. Further, an optimization method for fleet dispatch and CBM under acceptable risk is proposed based on an improved genetic algorithm. Finally, a fleet of 10 aircrafts is studied to verify the proposed method. The results shows that it could realize optimization and control of the aircraft fleet oriented to mission success.

  8. Model development and optimization of operating conditions to maximize PEMFC performance by response surface methodology

    Kanani, Homayoon; Shams, Mehrzad; Hasheminasab, Mohammadreza; Bozorgnezhad, Ali

    2015-01-01

    Highlights: • The optimization of the operating parameters in a serpentine PEMFC is done using RSM. • The RSM model can predict the cell power over the wide range of operating conditions. • St-An, St-Ca and RH-Ca have an optimum value to obtain the best performance. • The interactions of the operating conditions affect the output power significantly. • The cathode and anode stoichiometry are the most effective parameters on the power. - Abstract: Optimization of operating conditions to obtain maximum power in PEMFCs could have a significant role to reduce the costs of this emerging technology. In the present experimental study, a single serpentine PEMFC is used to investigate the effects of operating conditions on the electrical power production of the cell. Four significant parameters including cathode stoichiometry, anode stoichiometry, gases inlet temperature, and cathode relative humidity are studied using Design of Experiment (DOE) to obtain an optimal power. Central composite second order Response Surface Methodology (RSM) is used to model the relationship between goal function (power) and considered input parameters (operating conditions). Using this statistical–mathematical method leads to obtain a second-order equation for the cell power. This model considers interactions and quadratic effects of different operating conditions and predicts the maximum or minimum power production over the entire working range of the parameters. In this range, high stoichiometry of cathode and low stoichiometry of anode results in the minimum cell power and contrary the medium range of fuel and oxidant stoichiometry leads to the maximum power. Results show that there is an optimum value for the anode stoichiometry, cathode stoichiometry and relative humidity to reach the best performance. The predictions of the model are evaluated by experimental tests and they are in a good agreement for different ranges of the parameters

  9. Optimal starting conditions for the rendezvous maneuver: Analytical and computational approach

    Ciarcia, Marco

    The three-dimensional rendezvous between two spacecraft is considered: a target spacecraft on a circular orbit around the Earth and a chaser spacecraft initially on some elliptical orbit yet to be determined. The chaser spacecraft has variable mass, limited thrust, and its trajectory is governed by three controls, one determining the thrust magnitude and two determining the thrust direction. We seek the time history of the controls in such a way that the propellant mass required to execute the rendezvous maneuver is minimized. Two cases are considered: (i) time-to-rendezvous free and (ii) time-to-rendezvous given, respectively equivalent to (i) free angular travel and (ii) fixed angular travel for the target spacecraft. The above problem has been studied by several authors under the assumption that the initial separation coordinates and the initial separation velocities are given, hence known initial conditions for the chaser spacecraft. In this paper, it is assumed that both the initial separation coordinates and initial separation velocities are free except for the requirement that the initial chaser-to-target distance is given so as to prevent the occurrence of trivial solutions. Two approaches are employed: optimal control formulation (Part A) and mathematical programming formulation (Part B). In Part A, analyses are performed with the multiple-subarc sequential gradient-restoration algorithm for optimal control problems. They show that the fuel-optimal trajectory is zero-bang, namely it is characterized by two subarcs: a long coasting zero-thrust subarc followed by a short powered max-thrust braking subarc. While the thrust direction of the powered subarc is continuously variable for the optimal trajectory, its replacement with a constant (yet optimized) thrust direction produces a very efficient guidance trajectory. Indeed, for all values of the initial distance, the fuel required by the guidance trajectory is within less than one percent of the fuel required

  10. Conditional random slope: A new approach for estimating individual child growth velocity in epidemiological research.

    Leung, Michael; Bassani, Diego G; Racine-Poon, Amy; Goldenberg, Anna; Ali, Syed Asad; Kang, Gagandeep; Premkumar, Prasanna S; Roth, Daniel E

    2017-09-10

    Conditioning child growth measures on baseline accounts for regression to the mean (RTM). Here, we present the "conditional random slope" (CRS) model, based on a linear-mixed effects model that incorporates a baseline-time interaction term that can accommodate multiple data points for a child while also directly accounting for RTM. In two birth cohorts, we applied five approaches to estimate child growth velocities from 0 to 12 months to assess the effect of increasing data density (number of measures per child) on the magnitude of RTM of unconditional estimates, and the correlation and concordance between the CRS and four alternative metrics. Further, we demonstrated the differential effect of the choice of velocity metric on the magnitude of the association between infant growth and stunting at 2 years. RTM was minimally attenuated by increasing data density for unconditional growth modeling approaches. CRS and classical conditional models gave nearly identical estimates with two measures per child. Compared to the CRS estimates, unconditional metrics had moderate correlation (r = 0.65-0.91), but poor agreement in the classification of infants with relatively slow growth (kappa = 0.38-0.78). Estimates of the velocity-stunting association were the same for CRS and classical conditional models but differed substantially between conditional versus unconditional metrics. The CRS can leverage the flexibility of linear mixed models while addressing RTM in longitudinal analyses. © 2017 The Authors American Journal of Human Biology Published by Wiley Periodicals, Inc.

  11. Facet-Dependent Oxidative Goethite Growth As a Function of Aqueous Solution Conditions.

    Strehlau, Jennifer H; Stemig, Melissa S; Penn, R Lee; Arnold, William A

    2016-10-04

    Nitroaromatic compounds are groundwater pollutants that can be degraded through reactions with Fe(II) adsorbed on iron oxide nanoparticles, although little is known about the evolving reactivity of the minerals with continuous pollutant exposure. In this work, Fe(II)/goethite reactivity toward 4-chloronitrobenzene (4-ClNB) as a function of pH, organic matter presence, and reactant concentrations was explored using sequential-spike batch reactors. Reaction rate constants were smaller with lower pH, introduction of organic matter, and diluted reactant concentrations as compared to a reference condition. Reaction rate constants did not change with the number of 4-ClNB spikes for all reaction conditions. Under all conditions, oxidative goethite growth was demonstrated through X-ray diffraction, magnetic characterization, and transmission electron microscopy. Nonparametric statistics were applied to compare histograms of lengths and widths of goethite nanoparticles as a function of varied solution conditions. The conditions that slowed the reaction also resulted in statistically shorter and wider particles than for the faster reactions. Additionally, added organic matter interfered with particle growth on the favorable {021} faces to a greater extent, with statistically reduced rate of growth on the tip facets and increased rate of growth on the side facets. These data demonstrate that oxidative growth of goethite in aqueous systems is dependent on major groundwater variables, such as pH and the presence of organic matter, which could lead to the evolving reactivity of goethite particles in natural environments.

  12. Optimization of experimental conditions in uranium trace determination using laser time-resolved fluorimetry

    Baly, L.; Garcia, M.A.

    1996-01-01

    At the present paper a new sample excitation geometry is presented for the uranium trace determination in aqueous solutions by the Time-Resolved Laser-Induced Fluorescence. This new design introduces the laser radiation through the top side of the cell allowing the use of cells with two quartz sides, less expensive than commonly used at this experimental set. Optimization of the excitation conditions, temporal discrimination and spectral selection are presented

  13. Optimization of Fuel Cell System Operating Conditions for Fuel Cell Vehicles

    Zhao, Hengbing; Burke, Andy

    2008-01-01

    Proton Exchange Membrane fuel cell (PEMFC) technology for use in fuel cell vehicles and other applications has been intensively developed in recent decades. Besides the fuel cell stack, air and fuel control and thermal and water management are major challenges in the development of the fuel cell for vehicle applications. The air supply system can have a major impact on overall system efficiency. In this paper a fuel cell system model for optimizing system operating conditions was developed wh...

  14. Optimization of Saccharification Conditions of Lignocellulosic Biomass under Alkaline Pre-Treatment and Enzymatic Hydrolysis

    Rafał Łukajtis

    2018-04-01

    Full Text Available Pre-treatment is a significant step in the production of second-generation biofuels from waste lignocellulosic materials. Obtaining biofuels as a result of fermentation processes requires appropriate pre-treatment conditions ensuring the highest possible degree of saccharification of the feed material. An influence of the following process parameters were investigated for alkaline pre-treatment of Salix viminalis L.: catalyst concentration (NaOH, temperature, pre-treatment time and granulation. For this purpose, experiments were carried out in accordance to the Box-Behnken design for four factors. In the saccharification process of the pre-treated biomass, cellulolytic enzymes immobilized on diatomaceous earth were used. Based on the obtained results, a mathematical model for the optimal conditions of alkaline pre-treatment prediction is proposed. The optimal conditions of alkaline pre-treatment are established as follows: granulation 0.75 mm, catalyst concentration 7%, pre-treatment time 6 h and temperature 65 °C if the saccharification efficiency and cost analysis are considered. An influence of the optimized pre-treatment on both the chemical composition and structural changes for six various lignocellulosic materials (energetic willow, energetic poplar, beech, triticale, meadow grass, corncobs was investigated. SEM images of raw and pre-treated biomass samples are included in order to follow the changes in the biomass structure during hydrolysis.

  15. Optimizing cutting conditions on sustainable machining of aluminum alloy to minimize power consumption

    Nur, Rusdi; Suyuti, Muhammad Arsyad; Susanto, Tri Agus

    2017-06-01

    Aluminum is widely utilized in the industrial sector. There are several advantages of aluminum, i.e. good flexibility and formability, high corrosion resistance and electrical conductivity, and high heat. Despite of these characteristics, however, pure aluminum is rarely used because of its lacks of strength. Thus, most of the aluminum used in the industrial sectors was in the form of alloy form. Sustainable machining can be considered to link with the transformation of input materials and energy/power demand into finished goods. Machining processes are responsible for environmental effects accepting to their power consumption. The cutting conditions have been optimized to minimize the cutting power, which is the power consumed for cutting. This paper presents an experimental study of sustainable machining of Al-11%Si base alloy that was operated without any cooling system to assess the capacity in reducing power consumption. The cutting force was measured and the cutting power was calculated. Both of cutting force and cutting power were analyzed and modeled by using the central composite design (CCD). The result of this study indicated that the cutting speed has an effect on machining performance and that optimum cutting conditions have to be determined, while sustainable machining can be followed in terms of minimizing power consumption and cutting force. The model developed from this study can be used for evaluation process and optimization to determine optimal cutting conditions for the performance of the whole process.

  16. Pancreatic lipase inhibitory constituents from Morus alba leaves and optimization for extraction conditions.

    Jeong, Ji Yeon; Jo, Yang Hee; Kim, Seon Beom; Liu, Qing; Lee, Jin Woo; Mo, Eun Jin; Lee, Ki Yong; Hwang, Bang Yeon; Lee, Mi Kyeong

    2015-06-01

    The leaves of Morus alba (Moraceae) have been traditionally used for the treatment of metabolic diseases including diabetes and hyperlipidemia. Thus, inhibitory effect of M. alba leaves on pancreatic lipase and their active constituents were investigated in this study. Twenty phenolic compounds including ten flavonoids, eight benzofurans, one stilbene and one chalcones were isolated from the leaves of M. alba. Among the isolated compounds, morachalcone A (20) exerted strong pancreatic lipase inhibition with IC50 value of 6.2 μM. Other phenolic compounds containing a prenyl group showed moderate pancreatic lipase inhibition with IC50 value of <50 μM. Next, extraction conditions with maximum pancreatic lipase inhibition and phenolic content were optimized using response surface methodology with three-level-three-factor Box-Behnken design. Our results suggested the optimized extraction condition for maximum pancreatic lipase inhibition and phenolic content as ethanol concentration of 74.9%; temperature 57.4 °C and sample/solvent ratio, 1/10. The pancreatic lipase inhibition and total phenolic content under optimized condition were found to be 58.5% and 26.2 μg GAE (gallic acid equivalent)/mg extract, respectively, which were well matched with the predicted value. Copyright © 2015 Elsevier Ltd. All rights reserved.

  17. On the conditions required for vacancy loop growth in irradiated metals and alloys

    Hayns, M.R.

    1980-07-01

    A simple theoretical model is investigated which allows the conditions under which vacancy dislocation loop growth is possible to be examined. This forms an extension of previous work in that bulk defect recombination is not ignored and the effects of vacancy thermal emission are included. Whilst the present work does not provide a kinetic model for vacancy loop growth it has been possible to examine the criteria required for stable growth in some detail. The effects of network dislocation density, temperature, damage rate, the influence of other critical sinks, notably voids and grain boundaries, and interstitial dislocation loops have been considered. The analogy with the growth conditions for cavities as voids is highlighted. A detailed comparison with experiment is not attempted as this is being considered separately. (author)

  18. The in vitro fitness cost of antimicrobial resistance in Escherichia coli varies with the growth conditions

    Petersen, Andreas; Aarestrup, Frank Møller; Olsen, John Elmerdahl

    2009-01-01

    The objective of this study was to investigate the influence of stressful growth conditions on the fitness cost of antimicrobial resistance in Escherichia coli BJ4 caused by chromosomal mutations and plasmid acquisition. The fitness cost of chromosomal streptomycin resistance increased......H and at high-salt concentrations. Strains with an impaired rpoS demonstrated a reduced fitness only during growth in a high-salt concentration. In conclusion, it was demonstrated that bacterial fitness cost in association with antimicrobial resistance generally increases under stressful growth conditions....... However, the growth potential of bacteria with antimicrobial resistances did not increase in a straightforward manner in these in vitro experiments and is therefore probably even more difficult to predict in vivo....

  19. Classroom acoustics design guidelines based on the optimization of speaker conditions

    Pelegrin Garcia, David; Brunskog, Jonas

    2012-01-01

    School teachers suffer frequently from voice problems due to the high vocal load that they experience and the not-always-ideal conditions under which they have to teach. Traditionally, the purpose of the acoustic design of classrooms has been to optimize speech intelligibility. New guidelines...... and noise level measurements in classrooms. Requirements of optimum vocal comfort, average A-weighted speech levels across the audience higher than 50 dB, and a physical volume higher than 6 m3/student are combined to extract optimum acoustic conditions, which depend on the number of students....... These conditions, which are independent on the position of the speaker, cannot be optimum for more than 50 students. For classrooms with 10 students, the reverberation time in occupied conditions shall be between 0.5 and 0.65 s, and the volume between 60 and 170 m3. For classrooms with 40 students...

  20. Second-Order Necessary Optimality Conditions for Some State-Constrained Control Problems of Semilinear Elliptic Equations

    Casas, E.; Troeltzsch, F.

    1999-01-01

    In this paper we are concerned with some optimal control problems governed by semilinear elliptic equations. The case of a boundary control is studied. We consider pointwise constraints on the control and a finite number of equality and inequality constraints on the state. The goal is to derive first- and second-order optimality conditions satisfied by locally optimal solutions of the problem

  1. Evaluation procedure of creep-fatigue defect growth in high temperature condition and application

    Park, Chang Gyu; Kim, Jong Bum; Lee, Jae Han

    2003-12-01

    This study proposed the evaluation procedure of creep-fatigue defect growth on the high-temperature cylindrical structure applicable to the KALIMER, which is developed by KAERI. Parameters used in creep defect growth and the evaluation codes with these parameters were analyzed. In UK, the evaluation procedure of defect initiation and growth were proposed with R5/R6 code. In Japan, simple evauation method was proposed by JNC. In France, RCC-MR A16 code which was evaluation procedure of the creep-fatigue defect initiation and growth related to leak before break was developed, and equations related to load conditions were modified lately. As an application example, the creep-fatigue defect growth on circumferential semi-elliptical surface defect in high temperature cylindrical structure was evaluated by RCC-MR A16

  2. Bulk water phase and biofilm growth in drinking water at low nutrient conditions

    Boe-Hansen, Rasmus; Albrechtsen, Hans-Jørgen; Arvin, Erik

    2002-01-01

    , and cell-specific leucine incorporation rate. Bacteria in the bulk water phase incubated without the presence of biofilmexhibited a bacterial growth rate of 0.30 day1. The biofilmwas radioactively labelled by the addition of 14C-benzoic acid. Subsequently, a biofilmdetachm ent rate of 0.013 day1...... the formation of a mature quasi-stationary biofilm. At retention times of 12 h, total bacterial counts increased equivalent to a net bacterial growth rate of 0.048 day1. The bulk water phase bacteria exhibited a higher activity than the biofilmbacteria in terms of culturability, cell-specific ATP content......In this study, the bacterial growth dynamics of a drinking water distribution system at low nutrient conditions was studied in order to determine bacterial growth rates by a range of methods, and to compare growth rates in the bulk water phase and the biofilm. A model distribution system was used...

  3. Light-optimized growth of cyanobacterial cultures: Growth phases and productivity of biomass and secreted molecules in light-limited batch growth.

    Clark, Ryan L; McGinley, Laura L; Purdy, Hugh M; Korosh, Travis C; Reed, Jennifer L; Root, Thatcher W; Pfleger, Brian F

    2018-03-27

    Cyanobacteria are photosynthetic microorganisms whose metabolism can be modified through genetic engineering for production of a wide variety of molecules directly from CO 2 , light, and nutrients. Diverse molecules have been produced in small quantities by engineered cyanobacteria to demonstrate the feasibility of photosynthetic biorefineries. Consequently, there is interest in engineering these microorganisms to increase titer and productivity to meet industrial metrics. Unfortunately, differing experimental conditions and cultivation techniques confound comparisons of strains and metabolic engineering strategies. In this work, we discuss the factors governing photoautotrophic growth and demonstrate nutritionally replete conditions in which a model cyanobacterium can be grown to stationary phase with light as the sole limiting substrate. We introduce a mathematical framework for understanding the dynamics of growth and product secretion in light-limited cyanobacterial cultures. Using this framework, we demonstrate how cyanobacterial growth in differing experimental systems can be easily scaled by the volumetric photon delivery rate using the model organisms Synechococcus sp. strain PCC7002 and Synechococcus elongatus strain UTEX2973. We use this framework to predict scaled up growth and product secretion in 1L photobioreactors of two strains of Synechococcus PCC7002 engineered for production of l-lactate or L-lysine. The analytical framework developed in this work serves as a guide for future metabolic engineering studies of cyanobacteria to allow better comparison of experiments performed in different experimental systems and to further investigate the dynamics of growth and product secretion. Copyright © 2018 International Metabolic Engineering Society. Published by Elsevier Inc. All rights reserved.

  4. Effect of growth conditions on the photovoltaic efficiency of poly(terthiophene) based photoelectrochemical cells

    Tsekouras, George; Too, Chee O.; Wallace, Gordon G.

    2005-01-01

    Conditions associated with the electrochemical growth of poly(terthiophene) (PTTh) were shown to have a considerable effect on photovoltaic (PV) performance indicators, namely, short-circuit-current (I sc ), open-circuit-voltage (V oc ), fill-factor (FF) and power-conversion-efficiency (PCE). The solvent and electrochemical technique used during growth were found to have an effect on PV performance. Increasing the upper potential limit associated with growth by cyclic voltammetry (CV) was found to decrease PV efficiency. The use of higher temperatures during growth was found to improve PV performance. Conditions associated with the electrochemical growth of PTTh were found to affect PV performance because of resultant changes to the polymer morphology. Such changes were characterised using scanning electron microscopy (SEM). In general, PTTh morphologies that exhibited increased porosity gave better PV performance by increasing the contact area between the PTTh and the liquid electrolyte. Combining the optimum conditions for the electrochemical growth of PTTh yielded a photoelectrochemical cell (PEC) showing I sc = 888 μA cm -2 , V oc 152 mV, FF = 37.3% and PCE = 0.101% under halogen light (solar simulated) intensity of 500 W m -2

  5. The influence of MOVPE growth conditions on the shell of core-shell GaN microrod structures

    Schimpke, Tilman; Avramescu, Adrian; Koller, Andreas; Fernando-Saavedra, Amalia; Hartmann, Jana; Ledig, Johannes; Waag, Andreas; Strassburg, Martin; Lugauer, Hans-Jürgen

    2017-05-01

    A core-shell geometry is employed for most next-generation, three-dimensional opto-electric devices based on III-V semiconductors and grown by metal organic vapor phase epitaxy (MOVPE). Controlling the shape of the shell layers is fundamental for device optimization, however no detailed analysis of the influence of growth conditions has been published to date. We study homogeneous arrays of gallium nitride core-shell microrods with height and diameter in the micrometer range and grown in a two-step selective area MOVPE process. Changes in shell shape and homogeneity effected by deliberately altered shell growth conditions were accurately assessed by digital analysis of high-resolution scanning electron microscope images. Most notably, two temperature regimes could be established, which show a significantly different behavior with regard to material distribution. Above 900 °C of wafer carrier temperature, the shell thickness along the growth axis of the rods was very homogeneous, however variations between vicinal rods increase. In contrast, below 830 °C the shell thickness is higher close to the microrod tip than at the base of the rods, while the lateral homogeneity between neighboring microrods is very uniform. This temperature effect could be either amplified or attenuated by changing the remaining growth parameters such as reactor pressure, structure distance, gallium precursor, carrier gas composition and dopant materials. Possible reasons for these findings are discussed with respect to GaN decomposition as well as the surface and gas phase diffusion of growth species, leading to an improved control of the functional layers in next-generation 3D V-III devices.

  6. A novel strategy to identify the critical conditions for growth-induced instabilities.

    Javili, A; Steinmann, P; Kuhl, E

    2014-01-01

    Geometric instabilities in living structures can be critical for healthy biological function, and abnormal buckling, folding, or wrinkling patterns are often important indicators of disease. Mathematical models typically attribute these instabilities to differential growth, and characterize them using the concept of fictitious configurations. This kinematic approach toward growth-induced instabilities is based on the multiplicative decomposition of the total deformation gradient into a reversible elastic part and an irreversible growth part. While this generic concept is generally accepted and well established today, the critical conditions for the formation of growth-induced instabilities remain elusive and poorly understood. Here we propose a novel strategy for the stability analysis of growing structures motivated by the idea of replacing growth by prestress. Conceptually speaking, we kinematically map the stress-free grown configuration onto a prestressed initial configuration. This allows us to adopt a classical infinitesimal stability analysis to identify critical material parameter ranges beyond which growth-induced instabilities may occur. We illustrate the proposed concept by a series of numerical examples using the finite element method. Understanding the critical conditions for growth-induced instabilities may have immediate applications in plastic and reconstructive surgery, asthma, obstructive sleep apnoea, and brain development. © 2013 Elsevier Ltd. All rights reserved.

  7. Cholera toxin expression by El Tor Vibrio cholerae in shallow culture growth conditions.

    Cobaxin, Mayra; Martínez, Haydee; Ayala, Guadalupe; Holmgren, Jan; Sjöling, Asa; Sánchez, Joaquín

    2014-01-01

    Vibrio cholerae O1 classical, El Tor and O139 are the primary biotypes that cause epidemic cholera, and they also express cholera toxin (CT). Although classical V. cholerae produces CT in various settings, the El Tor and O139 strains require specific growth conditions for CT induction, such as the so-called AKI conditions, which consist of growth in static conditions followed by growth under aerobic shaking conditions. However, our group has demonstrated that CT production may also take place in shallow static cultures. How these type of cultures induce CT production has been unclear, but we now report that in shallow culture growth conditions, there is virtual depletion of dissolved oxygen after 2.5 h of growth. Concurrently, during the first three to 4 h, endogenous CO2 accumulates in the media and the pH decreases. These findings may explain CT expression at the molecular level because CT production relies on a regulatory cascade, in which the key regulator AphB may be activated by anaerobiosis and by low pH. AphB activation stimulates TcpP synthesis, which induces ToxT production, and ToxT directly stimulates ctxAB expression, which encodes CT. Importantly, ToxT activity is enhanced by bicarbonate. Therefore, we suggest that in shallow cultures, AphB is activated by initial decreases in oxygen and pH, and subsequently, ToxT is activated by intracellular bicarbonate that has been generated from endogenous CO2. This working model would explain CT production in shallow cultures and, possibly, also in other growth conditions. Copyright © 2013 Elsevier Ltd. All rights reserved.

  8. Optimization of trigeneration systems by Mathematical Programming: Influence of plant scheme and boundary conditions

    Piacentino, A.; Gallea, R.; Cardona, F.; Lo Brano, V.; Ciulla, G.; Catrini, P.

    2015-01-01

    Highlights: • Lay-out, design and operation of trigeneration plant is optimized for hotel building. • The temporal basis used for the optimization is properly selected. • The influence of plant scheme on the optimal results is discussed. • Sensitivity analysis is performed for different levels of tax exemption on fuel. • Dynamic behavior of the cogeneration unit influences its optimal operation strategy. - Abstract: The large potential for energy saving by cogeneration and trigeneration in the building sector is scarcely exploited due to a number of obstacles in making the investments attractive. The analyst often encounters difficulties in identifying optimal design and operation strategies, since a number of factors, either endogenous (i.e. related with the energy load profiles) and exogenous (i.e. related with external conditions like energy prices and support mechanisms), influence the economic viability. In this paper a decision tool is adopted, which represents an upgrade of a software analyzed in previous papers; the tool simultaneously optimizes the plant lay-out, the sizes of the main components and their operation strategy. For a specific building in the hotel sector, a preliminary analysis is performed to identify the most promising plant configuration, in terms of type of cogeneration unit (either microturbine or diesel oil/natural gas-fueled reciprocate engine) and absorption chiller. Then, sensitivity analyses are carried out to investigate the effects induced by: (a) tax exemption for the fuel consumed in “efficient cogeneration” mode, (b) dynamic behavior of the prime mover and consequent capability to rapidly adjust its load level to follow the energy loads

  9. Influence of growth conditions and surface reaction byproducts on GaN grown via metal organic molecular beam epitaxy: Toward an understanding of surface reaction chemistry

    Pritchett, David; Henderson, Walter; Burnham, Shawn D.; Doolittle, W. Alan

    2006-04-01

    The surface reaction byproducts during the growth of GaN films via metal organic molecular beam epitaxy (MOMBE) were investigated as a means to optimize material properties. Ethylene and ethane were identified as the dominant surface reaction hydrocarbon byproducts, averaging 27.63% and 7.15% of the total gas content present during growth. Intense ultraviolet (UV) photoexcitation during growth was found to significantly increase the abundance of ethylene and ethane while reducing the presence of H2 and N2. At 920°C, UV excitation was shown to enhance growth rate and crystalline quality while reducing carbon incorporation. Over a limited growth condition range, a 4.5×1019-3.4×1020 cm-3 variation in carbon incorporation was achieved at constant high vacuum. Coupled with growth rate gains, UV excitation yielded films with ˜58% less integrated carbon content. Structural material property variations are reported for various ammonia flows and growth temperatures. The results suggest that high carbon incorporation can be achieved and regulated during MOMBE growth and that in-situ optimization through hydrocarbon analysis may provide further enhancement in the allowable carbon concentration range.

  10. Environmental Growth Conditions of Trichoderma spp. Affects Indole Acetic Acid Derivatives, Volatile Organic Compounds, and Plant Growth Promotion

    Nieto-Jacobo, Maria F.; Steyaert, Johanna M.; Salazar-Badillo, Fatima B.; Nguyen, Dianne Vi; Rostás, Michael; Braithwaite, Mark; De Souza, Jorge T.; Jimenez-Bremont, Juan F.; Ohkura, Mana; Stewart, Alison

    2017-01-01

    Trichoderma species are soil-borne filamentous fungi widely utilized for their many plant health benefits, such as conferring improved growth, disease resistance and abiotic stress tolerance to their hosts. Many Trichoderma species are able to produce the auxin phytohormone indole-3-acetic acid (IAA), and its production has been suggested to promote root growth. Here we show that the production of IAA is strain dependent and diverse external stimuli are associated with its production. In in vitro assays, Arabidopsis primary root length was negatively affected by the interaction with some Trichoderma strains. In soil experiments, a continuum effect on plant growth was shown and this was also strain dependent. In plate assays, some strains of Trichoderma spp. inhibited the expression of the auxin reporter gene DR5 in Arabidopsis primary roots but not secondary roots. When Trichoderma spp. and A. thaliana were physically separated, enhancement of both shoot and root biomass, increased root production and chlorophyll content were observed, which strongly suggested that volatile production by the fungus influenced the parameters analyzed. Trichoderma strains T. virens Gv29.8, T. atroviride IMI206040, T. sp. “atroviride B” LU132, and T. asperellum LU1370 were demonstrated to promote plant growth through volatile production. However, contrasting differences were observed with LU1370 which had a negative effect on plant growth in soil but a positive effect in plate assays. Altogether our results suggest that the mechanisms and molecules involved in plant growth promotion by Trichoderma spp. are multivariable and are affected by the environmental conditions. PMID:28232840

  11. Monitoring growth condition of spring maize in Northeast China using a process-based model

    Wang, Peijuan; Zhou, Yuyu; Huo, Zhiguo; Han, Lijuan; Qiu, Jianxiu; Tan, Yanjng; Liu, Dan

    2018-04-01

    Early and accurate assessment of the growth condition of spring maize, a major crop in China, is important for the national food security. This study used a process-based Remote-Sensing-Photosynthesis-Yield Estimation for Crops (RS-P-YEC) model, driven by satellite-derived leaf area index and ground-based meteorological observations, to simulate net primary productivity (NPP) of spring maize in Northeast China from the first ten-day (FTD) of May to the second ten-day (STD) of August during 2001-2014. The growth condition of spring maize in 2014 in Northeast China was monitored and evaluated spatially and temporally by comparison with 5- and 13-year averages, as well as 2009 and 2013. Results showed that NPP simulated by the RS-P-YEC model, with consideration of multi-scattered radiation inside the crop canopy, could reveal the growth condition of spring maize more reasonably than the Boreal Ecosystem Productivity Simulator. Moreover, NPP outperformed other commonly used vegetation indices (e.g., Normalized Difference Vegetation Index (NDVI) and Enhanced Vegetation Index (EVI)) for monitoring and evaluating the growth condition of spring maize. Compared with the 5- and 13-year averages, the growth condition of spring maize in 2014 was worse before the STD of June and after the FTD of August, and it was better from the third ten-day (TTD) of June to the TTD of July across Northeast China. Spatially, regions with slightly worse and worse growth conditions in the STD of August 2014 were concentrated mainly in central Northeast China, and they accounted for about half of the production area of spring maize in Northeast China. This study confirms that NPP is a good indicator for monitoring and evaluating growth condition because of its capacity to reflect the physiological characteristics of crops. Meanwhile, the RS-P-YEC model, driven by remote sensing and ground-based meteorological data, is effective for monitoring crop growth condition over large areas in a near real

  12. Using Markov Models of Fault Growth Physics and Environmental Stresses to Optimize Control Actions

    Bole, Brian; Goebel, Kai; Vachtsevanos, George

    2012-01-01

    A generalized Markov chain representation of fault dynamics is presented for the case that available modeling of fault growth physics and future environmental stresses can be represented by two independent stochastic process models. A contrived but representatively challenging example will be presented and analyzed, in which uncertainty in the modeling of fault growth physics is represented by a uniformly distributed dice throwing process, and a discrete random walk is used to represent uncertain modeling of future exogenous loading demands to be placed on the system. A finite horizon dynamic programming algorithm is used to solve for an optimal control policy over a finite time window for the case that stochastic models representing physics of failure and future environmental stresses are known, and the states of both stochastic processes are observable by implemented control routines. The fundamental limitations of optimization performed in the presence of uncertain modeling information are examined by comparing the outcomes obtained from simulations of an optimizing control policy with the outcomes that would be achievable if all modeling uncertainties were removed from the system.

  13. Optimal Fermentation Conditions of Hyaluronidase Inhibition Activity on Asparagus cochinchinensis Merrill by Weissella cibaria.

    Kim, Minji; Kim, Won-Baek; Koo, Kyoung Yoon; Kim, Bo Ram; Kim, Doohyun; Lee, Seoyoun; Son, Hong Joo; Hwang, Dae Youn; Kim, Dong Seob; Lee, Chung Yeoul; Lee, Heeseob

    2017-04-28

    This study was conducted to evaluate the hyaluronidase (HAase) inhibition activity of Asparagus cochinchinesis (AC) extracts following fermentation by Weissella cibaria through response surface methodology. To optimize the HAase inhibition activity, a central composite design was introduced based on four variables: the concentration of AC extract ( X 1 : 1-5%), amount of starter culture ( X 2 : 1-5%), pH ( X 3 : 4-8), and fermentation time ( X 4 : 0-10 days). The experimental data were fitted to quadratic regression equations, the accuracy of the equations was analyzed by ANOVA, and the regression coefficients for the surface quadratic model of HAase inhibition activity in the fermented AC extract were estimated by the F test and the corresponding p values. The HAase inhibition activity indicated that fermentation time was most significant among the parameters within the conditions tested. To validate the model, two different conditions among those generated by the Design Expert program were selected. Under both conditions, predicted and experimental data agreed well. Moreover, the content of protodioscin (a well-known compound related to anti-inflammation activity) was elevated after fermentation of the AC extract at the optimized fermentation condition.

  14. Optimization of biomass, total carotenoids and astaxanthin production in Haematococcus pluvialis Flotow strain Steptoe (Nevada, USA under laboratory conditions

    ANA S CIFUENTES

    2003-01-01

    Full Text Available The microalga Haematococcus pluvialis Flotow is one of the natural sources of astaxanthin, a pigment widely used in salmon feed. This study was made to discover optimal conditions for biomass and astaxanthin production in H. pluvialis from Steptoe, Nevada (USA, cultured in batch mode. Growth was carried out under autotrophic (with NaNO3, NH4Cl and urea and mixotrophic conditions (with 4, 8, 12 mM sodium acetate under two photon flux densities (PFD (35 and 85 µmol m-2 s-1. The carotenogenesis was induced by 1 addition of NaCl (0.2 and 0.8 %, 2 N-deprivation and 3 high PFD (150 µmol m-2 s-1. Total carotenoids were estimated by spectrophotometry and total astaxanthin by HPLC. Ammonium chloride was the best N-source for growth (k=0.7 div day-1, 228-258 mg l-1and 2.0 x 10(5 - 2.5 x 10(5 cells ml-1 at both PFD, respectively. With increasing acetate concentration, a slight increment in growth occurred only at 85 µmol m-2 s-1. Light was the best inductive carotenogenic factor, and the highest carotenoid production (4.9 mg l-1, 25.0 pg cell-1 was obtained in cultures pre-grown in nitrate at low light. The NaCl caused an increase in carotenoid content per cell at increasing salt concentrations, but resulted in a high cell mortality and did not produce any increment in carotenoid content per volume compared to cultures grown at 150 µmol m-2 s-1. The highest carotenoid content per cell (22 pg and astaxanthin content per dry weight (10.3 mg g-1 (1% w/w were obtained at 85 µmol m-2 s-1 with 0.8% NaCl.

  15. The necessary and sufficient conditions of the optimality for hyperbolic systems with non-differentiable performance functional

    Kowalewski, A.

    1982-11-01

    In this paper an optimal control problem with non-differentiable cost function for distributed parameter system is solved. As an example an optimal control problem for system described by a linear partial differential of hyperbolic type with the Neuman's boundary condition is considered. By use of the Milutin-Dubovicki method, necessary and sufficient conditions of optimality with non-differentiable performance functional and constrained control are derived for Neuman's problem. (author)

  16. Rayleigh-Taylor instability under curved substrates: An optimal transient growth analysis

    Balestra, Gioele; Brun, P.-T.; Gallaire, François

    2016-12-01

    We investigate the stability of thin viscous films coated on the inside of a horizontal cylindrical substrate. In such a case, gravity acts both as a stabilizing force through the progressive drainage of the film and as a destabilizing force prone to form droplets via the Rayleigh-Taylor instability. The drainage solution, derived from lubrication equations, is found asymptotically stable with respect to infinitesimally small perturbations, although in reality, droplets often form. To resolve this paradox, we perform an optimal transient growth analysis for the first-order perturbations of the liquid's interface, generalizing the results of Trinh et al. [Phys. Fluids 26, 051704 (2014), 10.1063/1.4876476]. We find that the system displays a linear transient growth potential that gives rise to two different scenarios depending on the value of the Bond number (prescribing the relative importance of gravity and surface tension forces). At low Bond numbers, the optimal perturbation of the interface does not generate droplets. In contrast, for higher Bond numbers, perturbations on the upper hemicircle yield gains large enough to potentially form droplets. The gain increases exponentially with the Bond number. In particular, depending on the amplitude of the initial perturbation, we find a critical Bond number above which the short-time linear growth is sufficient to trigger the nonlinear effects required to form dripping droplets. We conclude that the transition to droplets detaching from the substrate is noise and perturbation dependent.

  17. Growth dynamics variation of different larch provenances under the mountain conditions in Poland

    Kulej, M. [Univ. of Agriculture, Cracow (Poland). Section of Seed Production and Selection

    1995-12-31

    The results of 25-year investigations based on measurements and statistical analysis concerning the growth dynamics variation of larch provenances from the entire area of Poland are reported in this paper. This is the first larch provenance experiment in Poland under mountain conditions. The results obtained showed a significant variability among the provenances tested as regards the basic growth characters (height, d.b.h., growth index) at the age of 5, 8, 11, 15, 20 and 25 years. The larch from Klodzko and Proszkow turned out to be the best in respect of growth during the entire 25-years period. Decidedly bad were provenances from Marcule, Grojec, Rawa mazowiecka and Kroscienko. We cannot forecast the future growth of larch when trees are 5-years old since such prognosis may carry an error. However, on the basis of the results obtained it may be concluded that when trees are about 8 years old the stabilization of the position of individual provenances as regards growth takes place. The height growth curves for the individual provenances during the 25-years period (with exception of the provenance from Marcule) fall within the interval {+-} 0,5S from the compensated curve for the entire population studied. All larch provenances in the experiment had reached the height growth culmination. A greatest differentiation in respect of this character occurred in case of the provenances from Sudetes. 27 refs, 4 figs, 8 tabs

  18. Growth dynamics variation of different larch provenances under the mountain conditions in Poland

    Kulej, M [Univ. of Agriculture, Cracow (Poland). Section of Seed Production and Selection

    1996-12-31

    The results of 25-year investigations based on measurements and statistical analysis concerning the growth dynamics variation of larch provenances from the entire area of Poland are reported in this paper. This is the first larch provenance experiment in Poland under mountain conditions. The results obtained showed a significant variability among the provenances tested as regards the basic growth characters (height, d.b.h., growth index) at the age of 5, 8, 11, 15, 20 and 25 years. The larch from Klodzko and Proszkow turned out to be the best in respect of growth during the entire 25-years period. Decidedly bad were provenances from Marcule, Grojec, Rawa mazowiecka and Kroscienko. We cannot forecast the future growth of larch when trees are 5-years old since such prognosis may carry an error. However, on the basis of the results obtained it may be concluded that when trees are about 8 years old the stabilization of the position of individual provenances as regards growth takes place. The height growth curves for the individual provenances during the 25-years period (with exception of the provenance from Marcule) fall within the interval {+-} 0,5S from the compensated curve for the entire population studied. All larch provenances in the experiment had reached the height growth culmination. A greatest differentiation in respect of this character occurred in case of the provenances from Sudetes. 27 refs, 4 figs, 8 tabs

  19. Diffusive growth of a single droplet with three different boundary conditions

    Tavassoli, Z.; Rodgers, G. J.

    2000-02-01

    We study a single, motionless three-dimensional droplet growing by adsorption of diffusing monomers on a 2D substrate. The diffusing monomers are adsorbed at the aggregate perimeter of the droplet with different boundary conditions. Models with both an adsorption boundary condition and a radiation boundary condition, as well as a phenomenological model, are considered and solved in a quasistatic approximation. The latter two models allow particle detachment. In the short time limit, the droplet radius grows as a power of the time with exponents of 1/4, 1/2 and 3/4 for the models with adsorption, radiation and phenomenological boundary conditions, respectively. In the long time limit a universal growth rate as $[t/\\ln(t)]^{1/3}$ is observed for the radius of the droplet for all models independent of the boundary conditions. This asymptotic behaviour was obtained by Krapivsky \\cite{krapquasi} where a similarity variable approach was used to treat the growth of a droplet with an adsorption boundary condition based on a quasistatic approximation. Another boundary condition with a constant flux of monomers at the aggregate perimeter is also examined. The results exhibit a power law growth rate with an exponent of 1/3 for all times.

  20. The optimal conditions for nata production from sugar palm syrup by Acetobacter xylinum TISTR 107

    Laochareonsuk, T.

    2005-11-01

    Full Text Available The optimal conditions of nata production from the fermentation of sugar palm syrup by Acetobacter xylinum TISTR 107 was studied. The results showed that optimized production for a litre of sugar palm syrup medium should compose 15 ºBrix concentration, 7.0 g NH4H2PO4 and 0.7 g MgSO4. 7 H2O at pH 4.25 and incubation at room temperature. The thickness of nata production reached 1.15 cm in 9 days. Sensory evaluation showed that there were no significant difference in odor and acceptability between the nata from sugar palm syrup and the traditional nata production from coconut juice whereas there were significant differences in color and texture. However, the nata from sugar palm syrup gave a better texture. Chemical analysis of the nata produced under these optimal culture conditions revealed 0.13% protein, 0.012% fat, 2.74% fiber, 0.378% nitrogen-free extract, 0.11% ash and 96.63% moisture content. The results suggest that nata produced from sugar palm syrup can be used in food and confectionery.

  1. Risk-informed optimal routing of ships considering different damage scenarios and operational conditions

    Decò, Alberto; Frangopol, Dan M.

    2013-01-01

    The aim of this paper is the development of a risk-informed decision tool for the optimal mission-oriented routing of ships. The strength of the hull is investigated by modeling the midship section with finite elements and by analyzing different damage levels depending on the propagation of plastification throughout the section. Vertical and horizontal flexural interaction is investigated. Uncertainties associated with geometry and material properties are accounted for by means of the implementation of the response surface method. Load effects are evaluated using strip theory. Reliability analysis is performed for several ship operational conditions and considering four different limit states. Then, risk is assessed by including the direct losses associated with five investigated damage states. The effects of corrosion on aged ships are included in the proposed approach. Polar representation of load effects, reliability, and direct risk are presented for a large spectrum of operational conditions. Finally, the optimal routing of ships is obtained by minimizing both the estimated time of arrival and the expected direct risk, which are clearly conflicting objectives. The optimization process provides feasible solutions belonging to the Pareto front. The proposed approach is applied to a Joint High Speed Sealift

  2. Optimal condition for fabricating superhydrophobic Aluminum surfaces with controlled anodizing processes

    Saffari, Hamid; Sohrabi, Beheshteh; Noori, Mohammad Reza; Bahrami, Hamid Reza Talesh

    2018-03-01

    A single step anodizing process is used to produce micro-nano structures on Aluminum (1050) substrates with sulfuric acid as electrolyte. Therefore, surface energy of the anodized layer is reduced using stearic acid modification. Undoubtedly, effects of different parameters including anodizing time, electrical current, and type and concentration of electrolyte on the final contact angle are systemically studied and optimized. Results show that anodizing current of 0.41 A, electrolyte (sulfuric acid) concentration of 15 wt.% and anodizing time of 90 min are optimal conditions which give contact angle as high as 159.2° and sliding angle lower than 5°. Moreover, the study reveals that adding oxalic acid to the sulfuric acid cannot enhance superhydrophobicity of the samples. Also, scanning electron microscopy images of samples show that irregular (bird's nest) structures present on the surface instead of high-ordered honeycomb structures expecting from normal anodizing process. Additionally, X-ray diffraction analysis of the samples shows that only amorphous structures present on the surface. The Brunauer-Emmett-Teller (BET) specific surface area of the anodized layer is 2.55 m2 g-1 in optimal condition. Ultimately, the surface keeps its hydrophobicity in air and deionized water (DIW) after one week and 12 weeks, respectively.

  3. Optimal condition for employing an axicon-generated Bessel beam to fabricate cylindrical microlens arrays

    Luo, Zhi; Yin, Kai; Dong, Xinran; Duan, Ji’an

    2018-05-01

    A numerical algorithm, modelling the transformation from a Gaussian beam to a Bessel beam, is presented for the purpose to study the optimal condition for employing an axicon-generated Bessel beam to fabricate cylindrical microlens arrays (CMLAs). By applying the numerical algorithm to simulate the spatial intensity distribution behind the axicon under different defects of a rotund-apex and different diameter ratios of an incident beam to the axicon, we find that the diffraction effects formed by the axicon edge can be almost eliminated when the diameter ratio is less than 1:2, but the spatial intensity distribution is disturbed dramatically even a few tens of microns deviation of the apex, especially for the front part of the axicon-generated Bessel beam. Fortunately, the lateral intensity profile in the rear part still maintains a desirable Bessel curve. Therefore, the rear part of the Bessel area and the less than 1:2 diameter ratio are the optimal choice for employing an axicon-generated Bessel beam to implement surface microstructures fabrication. Furthermore, by applying the optimal conditions to direct writing microstructures on fused silica with a femtosecond (fs) laser, a large area close-packed CMLA is fabricated. The CMLA presents high quality and uniformity and its optical performance is also demonstrated.

  4. Statistical Optimization of Conditions for Decolorization of Synthetic Dyes by Cordyceps militaris MTCC 3936 Using RSM

    Baljinder Kaur

    2015-01-01

    Full Text Available In the present study, the biobleaching potential of white rot fungus Cordyceps militaris MTCC3936 was investigated. For preliminary screening, decolorization properties of C. militaris were comparatively studied using whole cells in agar-based and liquid culture systems. Preliminary investigation in liquid culture systems revealed 100% decolorization achieved within 3 days of incubation for reactive yellow 18, 6 days for reactive red 31, 7 days for reactive black 8, and 11 days for reactive green 19 and reactive red 74. RSM was further used to study the effect of three independent variables such as pH, incubation time, and concentration of dye on decolorization properties of cell free supernatant of C. militaris. RSM based statistical analysis revealed that dye decolorization by cell free supernatants of C. militaris is more efficient than whole cell based system. The optimized conditions for decolorization of synthetic dyes were identified as dye concentration of 300 ppm, incubation time of 48 h, and optimal pH value as 5.5, except for reactive red 31 (for which the model was nonsignificant. The maximum dye decolorizations achieved under optimized conditions for reactive yellow 18, reactive green 19, reactive red 74, and reactive black 8 were 73.07, 65.36, 55.37, and 68.59%, respectively.

  5. Thermal preference of juvenile Dover sole (Solea solea in relation to thermal acclimation and optimal growth temperature.

    Edward Schram

    Full Text Available Dover sole (Solea solea is an obligate ectotherm with a natural thermal habitat ranging from approximately 5 to 27°C. Thermal optima for growth lie in the range of 20 to 25°C. More precise information on thermal optima for growth is needed for cost-effective Dover sole aquaculture. The main objective of this study was to determine the optimal growth temperature of juvenile Dover sole (Solea solea and in addition to test the hypothesis that the final preferendum equals the optimal growth temperature. Temperature preference was measured in a circular preference chamber for Dover sole acclimated to 18, 22 and 28°C. Optimal growth temperature was measured by rearing Dover sole at 19, 22, 25 and 28°C. The optimal growth temperature resulting from this growth experiment was 22.7°C for Dover sole with a size between 30 to 50 g. The temperature preferred by juvenile Dover sole increases with acclimation temperature and exceeds the optimal temperature for growth. A final preferendum could not be detected. Although a confounding effect of behavioural fever on temperature preference could not be entirely excluded, thermal preference and thermal optima for physiological processes seem to be unrelated in Dover sole.

  6. Optimization of Aluminum Anodization Conditions for the Fabrication of Nanowires by Electrodeposition

    Fucsko, Viola

    2005-01-01

    Anodized alumina nanotemplates have a variety of potential applications in the development of nanotechnology. Alumina nanotemplates are formed by oxidizing aluminum film in an electrolyte solution.During anodization, aluminum oxidizes, and, under the proper conditions, nanometer-sized pores develop. A series of experiments was conducted to determine the optimal conditions for anodization. Three-micrometer thick aluminum films on silicon and silicon oxide substrates were anodized using constant voltages of 13-25 V. 0.1-0.3M oxalic acid was used as the electrolyte. The anodization time was found to increase and the overshooting current decreased as both the voltage and the electrolyte concentrations were decreased. The samples were observed under a scanning electron microscope. Anodizing with 25V in 0.3M oxalic acid appears to be the best process conditions. The alumina nanotemplates are being used to fabricate nanowires by electrodeposition. The current-voltage characteristics of copper nanowires have also been studied.

  7. Nonlinear optimization method of ship floating condition calculation in wave based on vector

    Ding, Ning; Yu, Jian-xing

    2014-08-01

    Ship floating condition in regular waves is calculated. New equations controlling any ship's floating condition are proposed by use of the vector operation. This form is a nonlinear optimization problem which can be solved using the penalty function method with constant coefficients. And the solving process is accelerated by dichotomy. During the solving process, the ship's displacement and buoyant centre have been calculated by the integration of the ship surface according to the waterline. The ship surface is described using an accumulative chord length theory in order to determine the displacement, the buoyancy center and the waterline. The draught forming the waterline at each station can be found out by calculating the intersection of the ship surface and the wave surface. The results of an example indicate that this method is exact and efficient. It can calculate the ship floating condition in regular waves as well as simplify the calculation and improve the computational efficiency and the precision of results.

  8. Laser mutagenesis and producing cellulase condition optimization of Trichoderma virid protoplast

    Chen Shuli; Zhang Qin; Han Jingjing; Lv Jiangtao; Wang Shilong; Yao Side

    2009-01-01

    The protoplast of Trichoderma virid CICC13038 was mutated using Nd:YAG laser of 266 nm light. And a high-cellulase producing strain JG13 was bred by screening with cellulose microcrystalline. Under the condition of 28 degree C, 180 rpm and 72 h of fermentation time, optimal conditions for the celluase ferment by orthogonal experiment were: 2% bran as the carbon source, 1% (NH 4 ) 2 SO 4 as the nitrogen source, 0.5% Tween-80 as a enzyme-promoting agent,and 25 mL of medium volume in a 250 mL bottle. The cellulase activity of the mutant reached 35.68 U/mL, 25.76% higher than that of the original strain under the same conditions. The mutant JG13 has a great potential in industrial production. And it also can be used as the original strain for further mutagenesis to get the strain of higher cellulase activity. (authors)

  9. Portfolio optimization using Mean Absolute Deviation (MAD and Conditional Value-at-Risk (CVaR

    Lucas Pelegrin da Silva

    Full Text Available Abstract This paper investigates the efficiency of traditional portfolio optimization models when the returns of financial assets are highly volatile, e.g., in financial crises periods. We also develop alternative optimization models that combine the mean absolute deviation (MAD and the conditional value at risk (CVaR, attempting to mitigate inefficient, low return and/or high-risk, portfolios. Three methodologies for estimating the probability of the asset’s historical returns are also compared. By using historical data on the Brazilian stock market between 2004 and 2013, we analyze the efficiency of the proposed approaches. Our results show that the traditional models provide portfolios with higher returns, but our propose model are able to generate lower risk portfolios, which might be more attractive in volatile markets. In addition, we find that models that do not use equiprobable scenarios produce better results in terms of return and risk.

  10. Rapid Synthesis of Silver Nanoparticles from Fusarium oxysporum by Optimizing Physicocultural Conditions

    Sonal S. Birla

    2013-01-01

    Full Text Available Synthesis of silver nanoparticles (SNPs by fungi is emerging as an important branch of nanotechnology due to its ecofriendly, safe, and cost-effective nature. In order to increase the yield of biosynthesized SNPs of desired shape and size, it is necessary to control the cultural and physical parameters during the synthesis. We report optimum synthesis of SNPs on malt extract glucose yeast extract peptone (MGYP medium at pH 9–11, 40–60°C, and 190.7 Lux and in sun light. The salt concentrations, volume of filtrate and biomass quantity were found to be directly proportional to the yield. The optimized conditions for the stable and rapid synthesis will help in large scale synthesis of monodispersed SNPs. The main aim of the present study was to optimize different media, temperature, pH, light intensity, salt concentration, volume of filtrate, and biomass quantity for the synthesis of SNPs by Fusarium oxysporum.

  11. Optimal condition-based maintenance decisions for systems with dependent stochastic degradation of components

    Hong, H.P.; Zhou, W.; Zhang, S.; Ye, W.

    2014-01-01

    Components in engineered systems are subjected to stochastic deterioration due to the operating environmental conditions, and the uncertainty in material properties. The components need to be inspected and possibly replaced based on preventive or failure replacement criteria to provide the intended and safe operation of the system. In the present study, we investigate the influence of dependent stochastic degradation of multiple components on the optimal maintenance decisions. We use copula to model the dependent stochastic degradation of components, and formulate the optimal decision problem based on the minimum expected cost rule and the stochastic dominance rules. The latter is used to cope with decision maker's risk attitude. We illustrate the developed probabilistic analysis approach and the influence of the dependency of the stochastic degradation on the preferred decisions through numerical examples

  12. Optimal heat rejection pressure in transcritical carbon dioxide air conditioning and heat pump systems

    Liao, Shengming; Jakobsen, Arne

    1998-01-01

    Due to the urgent need for environmentally benign refrigerants, the use of the natural substance carbon dioxide in refrigeration systems has gained more and more attention. In systems such as automobile air-conditioners and heat pumps, owing to the relatively high heat rejection temperatures, the...... dioxide air conditioning or heat pump systems and for intelligent controlling such systems.......Due to the urgent need for environmentally benign refrigerants, the use of the natural substance carbon dioxide in refrigeration systems has gained more and more attention. In systems such as automobile air-conditioners and heat pumps, owing to the relatively high heat rejection temperatures......, the cycles using carbon dioxide as refrigerant will have to operate in the transcritical area. In a transcritical carbon dioxide system, there is an optimal heat rejection pressure that gives a maximum COP. In this paper, it is shown that the value of this optimal heat rejection pressure mainly depends...

  13. Importance of optimizing chromatographic conditions and mass spectrometric parameters for supercritical fluid chromatography/mass spectrometry.

    Fujito, Yuka; Hayakawa, Yoshihiro; Izumi, Yoshihiro; Bamba, Takeshi

    2017-07-28

    Supercritical fluid chromatography/mass spectrometry (SFC/MS) has great potential in high-throughput and the simultaneous analysis of a wide variety of compounds, and it has been widely used in recent years. The use of MS for detection provides the advantages of high sensitivity and high selectivity. However, the sensitivity of MS detection depends on the chromatographic conditions and MS parameters. Thus, optimization of MS parameters corresponding to the SFC condition is mandatory for maximizing performance when connecting SFC to MS. The aim of this study was to reveal a way to decide the optimum composition of the mobile phase and the flow rate of the make-up solvent for MS detection in a wide range of compounds. Additionally, we also showed the basic concept for determination of the optimum values of the MS parameters focusing on the MS detection sensitivity in SFC/MS analysis. To verify the versatility of these findings, a total of 441 pesticides with a wide polarity range (logP ow from -4.21 to 7.70) and pKa (acidic, neutral and basic). In this study, a new SFC-MS interface was used, which can transfer the entire volume of eluate into the MS by directly coupling the SFC with the MS. This enabled us to compare the sensitivity or optimum MS parameters for MS detection between LC/MS and SFC/MS for the same sample volume introduced into the MS. As a result, it was found that the optimum values of some MS parameters were completely different from those of LC/MS, and that SFC/MS-specific optimization of the analytical conditions is required. Lastly, we evaluated the sensitivity of SFC/MS using fully optimized analytical conditions. As a result, we confirmed that SFC/MS showed much higher sensitivity than LC/MS when the analytical conditions were fully optimized for SFC/MS; and the high sensitivity also increase the number of the compounds that can be detected with good repeatability in real sample analysis. This result indicates that SFC/MS has potential for

  14. Optimal experimental design in an epidermal growth factor receptor signalling and down-regulation model.

    Casey, F P; Baird, D; Feng, Q; Gutenkunst, R N; Waterfall, J J; Myers, C R; Brown, K S; Cerione, R A; Sethna, J P

    2007-05-01

    We apply the methods of optimal experimental design to a differential equation model for epidermal growth factor receptor signalling, trafficking and down-regulation. The model incorporates the role of a recently discovered protein complex made up of the E3 ubiquitin ligase, Cbl, the guanine exchange factor (GEF), Cool-1 (beta -Pix) and the Rho family G protein Cdc42. The complex has been suggested to be important in disrupting receptor down-regulation. We demonstrate that the model interactions can accurately reproduce the experimental observations, that they can be used to make predictions with accompanying uncertainties, and that we can apply ideas of optimal experimental design to suggest new experiments that reduce the uncertainty on unmeasurable components of the system.

  15. Influence of culture conditions on growth and protein metabolism in chlorella pyranosides

    Mazon Matanzo, M. P.; Fernandez Gonzalez, J.; Batuecas Suarez, B.

    1981-01-01

    Growth and protein metabolism of Chlorella pyranoside under different conditions of temperature, photo period and CO 2 concentration was studied. The optimum of biomass production was observed at 25 degree centigree, 40.000 ppm of CO 2 in air and a 20 h. light period, followed of 4 h. of darkness. Some variations in free aminoacids content was observed under different conditions but no change did occur in protein. (Author) 68 refs

  16. Influence of culture conditions on growth and protein metabolism in chlorella pyrenoidosa

    Fernandez Gonzalez, J.; Mazon, M.P.; Batuecas, B.

    1981-01-01

    Growth and protein metabolism of chlorella pyrenoidosa under differents conditions of temperature, photoperiod and CO 2 concentration was studied. The optimum of biomas production was observed at 25 deg C, 40.000 ppm of CO 2 in air and a 20 h. light period, followed of 4 h. of darkness. Some variations in free aminoacids content was observed under differents conditions but no change did occur in protein. (author)

  17. Enhanced shoot investment makes invasive plants exhibit growth advantages in high nitrogen conditions.

    Liu, X A; Peng, Y; Li, J J; Peng, P H

    2018-03-12

    Resource amendments commonly promote plant invasions, raising concerns over the potential consequences of nitrogen (N) deposition; however, it is unclear whether invaders will benefit from N deposition more than natives. Growth is among the most fundamental inherent traits of plants and thus good invaders may have superior growth advantages in response to resource amendments. We compared the growth and allocation between invasive and native plants in different N regimes including controls (ambient N concentrations). We found that invasive plants always grew much larger than native plants in varying N conditions, regardless of growth- or phylogeny-based analyses, and that the former allocated more biomass to shoots than the latter. Although N addition enhanced the growth of invasive plants, this enhancement did not increase with increasing N addition. Across invasive and native species, changes in shoot biomass allocation were positively correlated with changes in whole-plant biomass; and the slope of this relationship was greater in invasive plants than native plants. These findings suggest that enhanced shoot investment makes invasive plants retain a growth advantage in high N conditions relative to natives, and also highlight that future N deposition may increase the risks of plant invasions.

  18. Enhancing inulinase yield by irradiation mutation associated with optimization of culture conditions

    Yafeng Gou

    2015-09-01

    Full Text Available A new inulinase-producing strain was isolated from rhizosphere soils of Jerusalem artichoke collected from Shihezi (Xinjiang, China using Jerusalem artichoke power (JAP as sole carbon source. It was identified as an Aspergillus niger strain by analysis of 16S rRNA. To improve inulinase production, this fungus was subjected to mutagenesis induced by 60Co γ-irradiation. A genetically stable mutant (designated E12 was obtained and it showed 2.7-fold higher inulinase activity (128 U/mL than the parental strain in the supernatant of a submerged culture. Sequential methodology was used to optimize the inulinase production of stain E12. A screening trial was first performed using Plackett-Burman design and variables with statistically significant effects on inulinase bio-production were identified. These significant factors were further optimized by central composite design experiments and response surface methodology. Finally, it was found that the maximum inulinase production (185 U/mL could be achieved under the optimized conditions namely pH 7.0, yeast extract concentration of 5.0 g/L, JAP concentration of 66.5 g/L, peptone concentration of 29.1 g/L, solution volume of 49.4 mL in 250-mL shake flasks, agitation speed of 180 rpm, and fermentation time of 60 h. The yield of inulinase under optimized culture conditions was approximately 1.4-fold of that obtained by using basal culture medium. These findings are of significance for the potential industrial application of the mutant E12.

  19. Collecting conditions usage metadata to optimize current and future ATLAS software and processing

    Barberis, Dario; The ATLAS collaboration; Gallas, Elizabeth; Oda, Susumu

    2016-01-01

    Conditions data (for example: alignment, calibration, data quality) are used extensively in the processing of real and simulated data in ATLAS. The volume and variety of the conditions data needed by different types of processing are quite diverse, so optimizing its access requires a careful understanding of conditions usage patterns. These patterns can be quantified by mining representative log files from each type of processing and gathering detailed information about conditions usage for that type of processing into a central repository. In this presentation, we describe the systems developed to collect this conditions usage metadata per job type and describe a few specific (but very different) ways in which it has been used. For example, it can be used to cull specific conditions data into a much more compact package to be used by jobs doing similar types of processing: these customized collections can then be shipped with jobs to be executed on isolated worker nodes (such as HPC farms) that have no netwo...

  20. Define optimal conditions for steam generator tube integrity and an extended steam generator service life

    Lu, Y.C.

    2007-01-01

    Steam generator (SG) tubing materials are susceptible to corrosion degradation in certain electrochemical corrosion potential regions in the presence of some aggressive ions. Because of the hideout of impurities, the local chemistry conditions in areas under sludge and inside SG crevices may be very aggressive with high concentrations of chlorides and other impurities. These areas are the locations where SG tubing materials are susceptible to degradation such as pitting, crevice corrosion, intergranular attack (IGA) and stress corrosion cracking (SCC). The corrosion susceptibility of each SG alloy is different and is a function of the electrochemical corrosion potential (ECP) and chemical environment. Electrochemical corrosion behaviors of major SG tube alloys were studied under some plausible aggressive crevice chemistry conditions. The possible hazardous conditions leading to SG tube degradation and the conditions, which can minimize SG tube degradation have been determined. Optimal operating conditions in the form of a 'Recommended ECP/pH zone' for minimizing corrosion degradation have been defined for all major SG tube materials, including Alloys 600, 800, 690 and 400, under CANDU SG operating and startup conditions. SCC tests and accelerated corrosion tests were carried out to verify and revise the recommended ECP/pH zones. This information is being incorporated into ChemAND, a system health monitor for plant chemistry management developed by AECL, which alloys utilities to evaluate the status of the SG alloys and to minimize SG material degradation by appropriate SG water chemistry management. (author)

  1. Identification and characterization of a novel biodiesel producing halophilic Aphanothece halophytica and its growth and lipid optimization in various media

    Monisha Miriam, L.R.; Edwin Raj, R.; Kings, Ajith J.; Adhi Visvanathan, M.

    2017-01-01

    Highlights: • Halophilic microalgae, Aphanothece halophytica is a new candidate for third generation biodiesel source. • This species is robust, resilient, stable and non-susceptible to environmental conditions. • Novel media, seaweed extract and micronutrient are tested, compared and optimized. • High lipid productivity with low free fatty acid content confirms its potential for biodiesel production. - Abstract: The choice of precise strain is a crucial parameter to the success of algal oil industry. A novel halophilic microalgae, Aphanothece halophytica is selected as a potential source to satisfy the enormous energy needs. This species is highly resilient to environmental changes and can effectively utilize both organic and inorganic nutrients. Commercialization of biodiesel production is hindered by its production cost which necessitates advances in quantitative and qualitative microalgae cultivation. In this work, the salinity and major nutrient sources such as nitrogen, phosphorous and potassium of the standard Jaworski’s medium are replaced with commercial agricultural fertilizers like urea (N), single super phosphate (P) and muriate of potash (K) respectively and its concentrations optimized for the growth rate. The result showed maximum growth at 60 ppt salinity, 0.05 g l"−"1 (N), 0.5 g l"−"1 (P) and 0.5 g l"−"1 (K). Then a novel attempt is made to identify a low cost media, involving organic–inorganic (seaweed extract + NPK), inorganic (micronutrients + NPK), organic (vermicompost medium) for maximizing growth rate and lipid productivity, which is then compared with the standard Jaworski’s medium. A. halophytica gave the highest cell density of 21.6 × 10"6 ± 0.17 cells ml"−"1 on the 20th day with a lipid content of 29 ± 0.1% by dry weight in seaweed extract + NPK medium. It’s potentiality for biodiesel production is further confirmed by the gas chromatography analysis of the lipid.

  2. Slow Growth and Optimal Approximation of Pseudoanalytic Functions on the Disk

    Devendra Kumar

    2013-07-01

    Full Text Available Pseudoanalytic functions (PAF are constructed as complex combination of real-valued analytic solutions to the Stokes-Betrami System. These solutions include the generalized biaxisymmetric potentials. McCoy [10] considered the approximation of pseudoanalytic functions on the disk. Kumar et al. [9] studied the generalized order and generalized type of PAF in terms of the Fourier coefficients occurring in its local expansion and optimal approximation errors in Bernstein sense on the disk. The aim of this paper is to improve the results of McCoy [10] and Kumar et al. [9]. Our results apply satisfactorily for slow growth.

  3. Predictability of a Coupled Model of ENSO Using Singular Vector Analysis: Optimal Growth and Forecast Skill.

    Xue, Yan

    The optimal growth and its relationship with the forecast skill of the Zebiak and Cane model are studied using a simple statistical model best fit to the original nonlinear model and local linear tangent models about idealized climatic states (the mean background and ENSO cycles in a long model run), and the actual forecast states, including two sets of runs using two different initialization procedures. The seasonally varying Markov model best fit to a suite of 3-year forecasts in a reduced EOF space (18 EOFs) fits the original nonlinear model reasonably well and has comparable or better forecast skill. The initial error growth in a linear evolution operator A is governed by the eigenvalues of A^{T}A, and the square roots of eigenvalues and eigenvectors of A^{T}A are named singular values and singular vectors. One dominant growing singular vector is found, and the optimal 6 month growth rate is largest for a (boreal) spring start and smallest for a fall start. Most of the variation in the optimal growth rate of the two forecasts is seasonal, attributable to the seasonal variations in the mean background, except that in the cold events it is substantially suppressed. It is found that the mean background (zero anomaly) is the most unstable state, and the "forecast IC states" are more unstable than the "coupled model states". One dominant growing singular vector is found, characterized by north-south and east -west dipoles, convergent winds on the equator in the eastern Pacific and a deepened thermocline in the whole equatorial belt. This singular vector is insensitive to initial time and optimization time, but its final pattern is a strong function of initial states. The ENSO system is inherently unpredictable for the dominant singular vector can amplify 5-fold to 24-fold in 6 months and evolve into the large scales characteristic of ENSO. However, the inherent ENSO predictability is only a secondary factor, while the mismatches between the model and data is a

  4. Understanding the reaction kinetics to optimize graphene growth on Cu by chemical vapor deposition

    Kraus, Juergen; Boebel, Lena; Zwaschka, Gregor; Guenther, Sebastian [Technische Universitaet Muenchen, Zentralinstitut fuer Katalyseforschung, Chemie Department, Physikalische Chemie mit Schwerpunkt Katalyse, Garching (Germany)

    2017-11-15

    Understanding and controlling the growth kinetics of graphene is a prerequisite to synthesize this highly wanted material by chemical vapor deposition on Cu, e.g. for the construction of ultra-stable electron transparent membranes. It is reviewed that Cu foils contain a considerable amount of carbon in the bulk which significantly exceeds the expected amount of thermally equilibrated dissolved carbon in Cu and that this carbon must be removed before any high quality graphene may be grown. Starting with such conditioned Cu foils, systematic studies of the graphene growth kinetics in a reactive CH{sub 4}/H{sub 2} atmosphere allow to extract the following meaningful data: prediction of the equilibrium constant of the graphene formation reaction within a precision of a factor of two, the confirmation that the graphene growth proceeds from a C(ad)-phase on Cu which is in thermal equilibrium with the reactive gas phase, its apparent activation barrier and finally the prediction of the achievable growth velocity of the growing graphene flakes during chemical vapor deposition. As a result of the performed study, growth parameters are identified for the synthesis of high quality monolayer graphene with single crystalline domains of 100-1000 μm in diameter within a reasonable growth time. (copyright 2017 by WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  5. Optimal conditions for obtaining collagen from chicken feet and its characterization

    Íris Braz da Silva ARAÚJO

    2018-04-01

    Full Text Available Abstract The objective of this study was to extract collagen from chicken feet, determining optimal extraction conditions according to acetic acid concentration, pepsin content and time of enzymatic hydrolysis. A factorial design 23 was used, with three replications at the central point, totaling 11 experiments. The response variable studied was the collagen content of the isolate obtained. In addition to the optimization, the characterization of the isolates with higher and lower collagen content, in relation to the amino acid profile, electrophoretic profile, peptide hydrophobicity and functional properties, such as water solubility, water retention capacity and emulsifying activity, were carried out. The proposed model was statistically significant, with conditions of higher collagen content of 0.3 mol/L of acetic acid, 0.2% of pepsin and 12 hours of hydrolysis. The collagen isolate under these conditions showed higher iminoacids content, higher sum of peptide areas, higher solubility in water and water retention at 60 °C. The treatment with lower collagen content showed high emulsifying activity. The collagen isolate of the chicken feet presented characteristics makes it suitable for application in the food industry.

  6. Optimization of Freeze Drying Conditions for Purified Pectinase from Mango (Mangifera indica cv. Chokanan Peel

    Abdul Manap Mohd Yazid

    2012-03-01

    Full Text Available Response surface methodology (RSM along with central composite design (CCD was applied to optimize the freeze drying conditions for purified pectinase from mango (Mangifera indica cv. Chokanan peel. The effect of pectinase content (−2.66, 62.66 mg/mL, Arabic gum (−1.21, 10.21%, w/v, and maltodextrin (0.73, 7.26%, w/v as independent variables on activity, yield, and storage stability of freeze-dried enzyme was evaluated. Storage stability of pectinase was investigated after one week at 4 °C and yield percentage of the enzyme after encapsulation was also determined. The independent variables had the most significant (p < 0.05 effect on pectinase activity and yield of the enzyme. It was observed that the interaction effect of Arabic gum and maltodextrin improved the enzymatic properties of freeze-dried pectinase. The optimal conditions for freeze-dried pectinase from mango peel were obtained using 30 mg/mL of pectinase content, 4.5 (%, w/v of Arabic gum, and 4 (%, w/v of maltodextrin. Under these conditions, the maximum activity (11.12 U/mL, yield (86.4% and storage stability (84.2% of encapsulated pectinase were achieved.

  7. Optimization of Freeze Drying Conditions for Purified Pectinase from Mango (Mangifera indica cv. Chokanan) Peel

    Mehrnoush, Amid; Mustafa, Shuhaimi; Yazid, Abdul Manap Mohd

    2012-01-01

    Response surface methodology (RSM) along with central composite design (CCD) was applied to optimize the freeze drying conditions for purified pectinase from mango (Mangifera indica cv. Chokanan) peel. The effect of pectinase content (−2.66, 62.66 mg/mL), Arabic gum (−1.21, 10.21%, w/v), and maltodextrin (0.73, 7.26%, w/v) as independent variables on activity, yield, and storage stability of freeze-dried enzyme was evaluated. Storage stability of pectinase was investigated after one week at 4 °C and yield percentage of the enzyme after encapsulation was also determined. The independent variables had the most significant (p < 0.05) effect on pectinase activity and yield of the enzyme. It was observed that the interaction effect of Arabic gum and maltodextrin improved the enzymatic properties of freeze-dried pectinase. The optimal conditions for freeze-dried pectinase from mango peel were obtained using 30 mg/mL of pectinase content, 4.5 (%, w/v) of Arabic gum, and 4 (%, w/v) of maltodextrin. Under these conditions, the maximum activity (11.12 U/mL), yield (86.4%) and storage stability (84.2%) of encapsulated pectinase were achieved. PMID:22489134

  8. Effect of different seed treatments on maize seed germination parameters under optimal and suboptimal temperature conditions

    Vujošević Bojana

    2017-01-01

    Full Text Available The aim of this study was to determine the effect of different seed treatments on germination parameters of three maize genotypes under optimal and suboptimal temperature conditions. Seed was treated with recommended doses of three commercial pesticide formulations: metalaxyl-m 10 g/L + fludioxonil 25 g/L, metalaxyl 20 g/kg + prothioconazole 100 g/kg and thiacloprid 400 g/L. Testing was conducted at 25°C and 15°C. Results of the study indicate that there are differences in response of maize genotypes to applied seed treatments, as well as to a specific treatment at optimal and suboptimal temperatures. Some treatments, depending on the mixing partner and temperature conditions, can affect final germination. In other cases, germination rate can be accelerated or prolonged, but with no effect on final germination. In order to provide fast and uniform emergence under different temperature conditions, further examination of the response of maize genotypes to specific seed treatments would be beneficial.

  9. Stand conditions immediately following a restoration harvest in an old-growth pine-hardwood remnant

    D. C. Bragg

    2010-01-01

    Portions of the Levi Wilcoxon Demonstration Forest (LWDF), a privately owned parcel of old-growth pine and hardwoods in Ashley County, Arkansas, were recently treated to restore conditions similar to some historic accounts of the virgin forest. Following a hardwood-only cut, a post-harvest inventory showed that the number of tree species in the sample area declined...

  10. Spatial variation in growth, condition and maturation reaction norms of the Baltic herring Clupea harengus membras

    Vainikka, A.; Mollet, F.M.; Casini, M.; Gardmark, A.

    2009-01-01

    Understanding of spatial patterns in life-history traits can help fisheries management focus on biologically and functionally relevant stock units. In the present study, we examined life-history variation in growth, condition and maturation of the Baltic herring Clupea harengus membras among

  11. Using time-dependent models to investigate body condition and growth rate of the giant gartersnake

    Coates, P.S.; Wylie, G.D.; Halstead, B.J.; Casazza, Michael L.

    2009-01-01

    Identifying links between phenotypic attributes and fitness is a primary goal of reproductive ecology. Differences in within-year patterns of body condition between sexes of gartersnakes in relation to reproduction and growth are not fully understood. We conducted an 11-year field study of body condition and growth rate of the giant gartersnake Thamnophis gigas across 13 study areas in the Central Valley of California, USA. We developed a priori mixed effects models of body condition index (BCI), which included covariates of time, sex and snout-vent length and reported the best-approximating models using an information theoretic approach. Also, we developed models of growth rate index (GRI) using covariates of sex and periods based on reproductive behavior. The largest difference in BCI between sexes, as predicted by a non-linear (cubic) time model, occurred during the mating period when female body condition (0.014??0.001 se) was substantially greater than males (-0.027??0.002 se). Males likely allocated energy to search for mates, while females likely stored energy for embryonic development. We also provided evidence that males use more body energy reserves than females during hibernation, perhaps because of different body temperatures between sexes. We found GRI of male snakes was substantially lower during the mating period than during a non-mating period, which indicated that a trade-off existed between searching for mates and growth. These findings contribute to our understanding of snake ecology in a Mediterranean climate. ?? 2009 The Zoological Society of London.

  12. Individual Differences in the Expression of Conditioned Fear Are Associated with Endogenous Fibroblast Growth Factor 2

    Graham, Bronwyn M.; Richardson, Rick

    2016-01-01

    These experiments examined the relationship between the neurotrophic factor fibroblast growth factor 2 (FGF2) and individual differences in the expression of conditioned fear. Experiments 1 and 2 demonstrated that rats naturally expressing low levels of contextual or cued fear have higher levels of hippocampal FGF2 relative to rats that express…

  13. EXO70C2 is a key regulatory factor for optimal tip growth of pollen

    Synek, Lukas

    2017-03-30

    The exocyst, an eukaryotic tethering complex, co-regulates targeted exocytosis as an effector of small GTPases in polarized cell growth. In land plants, several exocyst subunits are encoded by double or triple paralogs, culminating in tens of EXO70 paralogs. Out of 23 Arabidopsis EXO70 isoforms, we analyzed seven isoforms expressed in pollen. Genetic and microscopic analyses of single mutants in EXO70A2, C1, C2, F1, H3, H5, and H6 genes revealed that only a loss-of-function EXO70C2 allele resulted in a significant male-specific transmission defect (segregation 40%:51%:9%) due to aberrant pollen tube growth. Mutant pollen tubes grown in vitro exhibited enhanced growth rate and a decreased thickness of the tip cell wall, causing tip bursts. However, exo70C2 pollen tubes could frequently recover and restart their speedy elongation, resulting in a repetitive stop-and-go growth dynamics. A pollen-specific depletion of the closest paralog, EXO70C1, using ami-RNA in the exo70C2 mutant background resulted in a complete pollen-specific transmission defect, suggesting redundant functions of EXO70C1 and EXO70C2. Both EXO70C1 and EXO70C2, GFP-tagged and expressed under their native promoters, localized in the cytoplasm of pollen grains, pollen tubes, and also root trichoblast cells. Expression of EXO70C2-GFP complemented aberrant growth of exo70C2 pollen tubes. The absent EXO70C2 interactions with core exocyst subunits in the yeast two-hybrid assay, cytoplasmic localization, and genetic effect suggest an unconventional EXO70 function possibly as a regulator of exocytosis outside the exocyst complex. In conclusion, EXO70C2 is a novel factor contributing to the regulation of optimal tip growth of Arabidopsis pollen tubes.

  14. Optimization of hetero-epitaxial growth for the threading dislocation density reduction of germanium epilayers

    Chong, Haining; Wang, Zhewei; Chen, Chaonan; Xu, Zemin; Wu, Ke; Wu, Lan; Xu, Bo; Ye, Hui

    2018-04-01

    In order to suppress dislocation generation, we develop a "three-step growth" method to heteroepitaxy low dislocation density germanium (Ge) layers on silicon with the MBE process. The method is composed of 3 growth steps: low temperature (LT) seed layer, LT-HT intermediate layer as well as high temperature (HT) epilayer, successively. Threading dislocation density (TDD) of epitaxial Ge layers is measured as low as 1.4 × 106 cm-2 by optimizing the growth parameters. The results of Raman spectrum showed that the internal strain of heteroepitaxial Ge layers is tensile and homogeneous. During the growth of LT-HT intermediate layer, TDD reduction can be obtained by lowering the temperature ramping rate, and high rate deposition maintains smooth surface morphology in Ge epilayer. A mechanism based on thermodynamics is used to explain the TDD and surface morphological dependence on temperature ramping rate and deposition rate. Furthermore, we demonstrate that the Ge layer obtained can provide an excellent platform for III-V materials integrated on Si.

  15. Use of Phytone Peptone to Optimize Growth and Cell Density of Lactobacillus reuteri

    Olabiyi A. Atilola

    2015-08-01

    Full Text Available The objective of this study was to determine the use of phytone peptone to optimize the growth and cell density of Lactobacillus reuteri. Four strains of L. reuteri (DSM 20016, SD 2112, CF 2-7F, and MF 2-3, were used in this study. An overnight culture of individual strains was inoculated into fresh basal media with various protein sources (peptone, tryptone, proteose peptone #3, phytone peptone, tryptic soy broth, yeast extract, and beef extract. Samples were then mixed well and incubated at 37 °C for 15 h. Bacterial growth was monitored by measuring turbidity (optical density 610 nm at different time intervals during the incubation period. At the end of incubation, samples were plated on de-Man Rogosa Sharpe (MRS agar to determine the bacterial population. Our results showed that phytone peptone promoted the growth of L. reuteri (p < 0.05 by 1.4 log CFU/mL on average compared to the control samples. Therefore, phytone peptone could be included in laboratory media to enhance growth and increase the cell density of L. reuteri.

  16. Deep Soil Conditions Make Mediterranean Cork Oak Stem Growth Vulnerable to Autumnal Rainfall Decline in Tunisia

    Lobna Zribi

    2016-10-01

    Full Text Available Tree rings provide fruitful information on climate features driving annual forest growth through statistical correlations between annual tree growth and climate features. Indices built upon tree growth limitation by carbon sequestration (source hypothesis or drought-driven cambial phenology (sink hypothesis can be used to better identify underlying processes. We used both analytical frameworks on Quercus suber, a sparsely studied species due to tree ring methodological issues, and growing on a favorable sub-humid Mediterranean climate and deep soil conditions in Tunisia (North Africa. Statistical analysis revealed the major role of autumnal rainfall before the growing season on annual tree growth over the 1918–2008 time series. Using a water budget model, we were able to explain the critical role of the deep soil water refill during the wet season in affecting both the drought onset controlling growth phenology and the summer drought intensity affecting carbon assimilation. Analysis of recent climate changes in the region additionally illustrated an increase in temperatures enhancing the evaporative demand and advancing growth start, and a decline in rainfalls in autumn, two key variables driving stem growth. We concluded on the benefits of using process-based indices in dendrochronological analysis and identified the main vulnerability of this Mediterranean forest to autumnal rainfall decline, a peculiar aspect of climate change under summer-dry climates.

  17. Optimization of Coolant Technique Conditions for Machining A319 Aluminium Alloy Using Response Surface Method (RSM)

    Zainal Ariffin, S.; Razlan, A.; Ali, M. Mohd; Efendee, A. M.; Rahman, M. M.

    2018-03-01

    Background/Objectives: The paper discusses about the optimum cutting parameters with coolant techniques condition (1.0 mm nozzle orifice, wet and dry) to optimize surface roughness, temperature and tool wear in the machining process based on the selected setting parameters. The selected cutting parameters for this study were the cutting speed, feed rate, depth of cut and coolant techniques condition. Methods/Statistical Analysis Experiments were conducted and investigated based on Design of Experiment (DOE) with Response Surface Method. The research of the aggressive machining process on aluminum alloy (A319) for automotive applications is an effort to understand the machining concept, which widely used in a variety of manufacturing industries especially in the automotive industry. Findings: The results show that the dominant failure mode is the surface roughness, temperature and tool wear when using 1.0 mm nozzle orifice, increases during machining and also can be alternative minimize built up edge of the A319. The exploration for surface roughness, productivity and the optimization of cutting speed in the technical and commercial aspects of the manufacturing processes of A319 are discussed in automotive components industries for further work Applications/Improvements: The research result also beneficial in minimizing the costs incurred and improving productivity of manufacturing firms. According to the mathematical model and equations, generated by CCD based RSM, experiments were performed and cutting coolant condition technique using size nozzle can reduces tool wear, surface roughness and temperature was obtained. Results have been analyzed and optimization has been carried out for selecting cutting parameters, shows that the effectiveness and efficiency of the system can be identified and helps to solve potential problems.

  18. Optimization of protectant, salinity and freezing condition for freeze-drying preservation of Edwardsiella tarda

    Yu, Yongxiang; Zhang, Zheng; Wang, Yingeng; Liao, Meijie; Li, Bin; Xue, Liangyi

    2017-10-01

    Novel preservation condition without ultra-low temperature is needed for the study of pathogen in marine fishes. Freeze-drying is such a method usually used for preservation of terrigenous bacteria. However, studies using freeze-drying method to preserving marine microorganisms remain very limited. In this study, we optimized the composition of protectants during the freeze-drying of Edwardsiella tarda, a fish pathogen that causes systemic infection in marine fishes. We found that the optimal composition of protectant mixture contained trehalose (8.0%), skim milk (12.0%), sodium citrate (2.0%), serum (12.0%) and PVP (2.0%). Orthogonal and interaction analyses demonstrated the interaction between serum and skim milk or sodium citrate. The highest survival rate of E. tarda was observed when the concentration of NaCl was 10.0, 30.0 and between 5.0 and 10.0 g L-1 for preparing TSB medium, E. tarda suspension and protectant mixture, respectively. When E. tarda was frozen at -80°C or -40°C for 6 h, its survival rate was higher than that under other tested conditions. Under the optimized conditions, when the protectant mixture was used during freeze-drying process, the survival rate (79.63%-82.30%) of E. tarda was significantly higher than that obtained using single protectant. Scanning electron microscopy (SEM) image indicated that E. tarda was embedded in thick matrix with detectable aggregation. In sum, the protectant mixture may be used as a novel cryoprotective additive for E. tarda.

  19. Optimization conditions for the separation of rare earth elements, americium, curium and cesium with HPLC technique

    Goutelard, F.; Caussignac, C.; Brennetot, R.; Stadelmann, G.; Gautier, C.

    2009-01-01

    In order to validate the neutronic code calculations used in the nuclear field, it is necessary to quantify the isotopic composition of the nuclear irradiated fuels with high precision and accuracy. A separation step whose objective is to isolate the elements of interest in a fraction as pure as possible, is performed before mass spectrometry detection (MC-ICP-MS, TIMS), in order to eliminate isobaric interferences. In a first step, uranium and plutonium are separated from the fission products by ion exchange chromatography. Then, fission products are separated by high performance liquid chromatography (HPLC). A gradient separation with a silica sulphonated support as stationary phase and hydroxy-methyl butyric acid (HMB) as eluent solution provides a good degree of separation of the rare earth elements, Am, Cm and Cs. But, for a same manufacturer, the rate of sulphonated groups is variable from one column to another for a given production batch. For every replacement of column, it is necessary to adjust the separation conditions. Furthermore, the high radioactivity of the samples injected damages the stationary phase, dragging a regular renewal of the columns. The goal of this study is to determine the optimal separation conditions with a minimum of tests in order to limit the time assigned to this operation. A first Doehlert experimental design with pH and HMB concentration as variables has been implemented to optimize Gd, Eu separation, in isocratic initial conditions. A second one has been tested in order to separate the higher lanthanides and to fix the final conditions of the gradient separation. A last set of tests has been performed to characterize the cesium behaviour. Finally, the gradient conditions have been adjusted in order to perform the full separation of lanthanides, Cs, Am and Cm with nuclear facilities. (author)

  20. Survey of Optimal Temperature and Moisture for Worms Growth and Operating Vermicompost Production of Food Wastes

    A Eslami; A Nabaey; R Rostami

    2009-01-01

    "n "nBackground and Objectives:Nowadays vermicompost production of food wastes is posed as one of appropriate methods to food wastes. disposal, its production used in agriculture and gardening. Moreover this process has some by products beside useful fertilizer that one of them is the worms. we can use them in variety of products specially in production of poultry and fish food. So determination of optimal condition for operating vermicompost production process of food wastes and worms. growt...

  1. Optimization of autohydrolysis conditions to extract antioxidant phenolic compounds from spent coffee grounds

    Ballesteros, Lina F.; Ramirez, Monica J.; Orrego, Carlos E.

    2017-01-01

    Autohydrolysis, which is an eco-friendly technology that employs only water as extraction solvent, was used to extract antioxidant phenolic compounds from spent coffee grounds (SCG). Experimental assays were carried out using different temperatures (160–200 °C), liquid/solid ratios (5–15 ml/g SCG.......46 mg TE/g SCG, and TAA = 66.21 mg α-TOC/g SCG) consisted in using 15 ml water/g SCG, at 200 °C during 50 min. Apart from being a green technology, autohydrolysis under optimized conditions was demonstrated to be an efficient method to extract antioxidant phenolic compounds from SCG....

  2. Determination of optimized growth medium and cryoprotective additives to enhance the growth and survival of Lactobacillus salivarius.

    Yeo, Soyoung; Shin, Hee Sung; Lee, Hye Won; Hong, Doseon; Park, Hyunjoon; Holzapfel, Wilhelm; Kim, Eun Bae; Huh, Chul Sung

    2018-03-16

    Beneficial effects of lactic acid bacteria (LAB) have been intensively investigated in recent decades with special focus on modulation of the host intestinal microbiota. Numerous discoveries of effective probiotics are driven by a significantly increasing demand for dietary supplements. Consequently, technological advances in the large-scale production and lyophilization are needed by probiotic-related industries for producing probiotic LAB for commercial use. Our study had a dual objective, i.e., to determine the optimum growth medium composition and to investigate appropriate cryoprotective additives (CPAs) for Lactobacillus salivarius , and compare its responses with other Lactobacillus species. The one-factor-at-a-time method and central composite design were applied to determine the optimal medium composition for L. salivarius cultivation. The following composition of the medium was established (per liter): 21.64 g maltose, 85 g yeast extract, 1.21 ml Tween 80, 6 g sodium acetate, 0.2 g MgSO 4 ∙7H 2 O, 0.02 g MnSO 4 ∙H 2 O, 1 g K 2 HPO 4 , 1.5 g KH 2 PO 4 , 0.01 g FeSO 4 ∙7H 2 O and 1 g sodium citrate. A cryoprotective additive combination comprising 10% ( w/v ) skim milk and 10% ( w/v ) sucrose supplemented with 2.5% ( w/v ) sodium glutamate was selected for L. salivarius , and its effectiveness was confirmed using culture-independent methods in the freeze-dried cells of the Lactobacillus strains. In conclusion, the optimized medium enhanced the species-specific cultivation of L. salivarius . On the other hand, the cryoprotective effects of the selected CPA mixture may also be dependent on the bacterial strain. This study highlights the necessity for precise and advanced processing techniques for large-scale production of probiotics in the food and feed industries.

  3. Effective Condition for Whole Testis Cryopreservation of Endangered Miho Spine Loach (Cobitis choii) Through the Optimization of Mud Loach (Misgurnus mizolepis) Whole Testis Cryopreservation Condition.

    Kim, J J; Nam, Y K; Bang, I C; Gong, S P

      BACKGROUND: Miho spine loach (Cobitis choii) is an endangered Korean endemic fish. Whole testis cryopreservation is a good way for species preservation, but needs to the sacrifice of a large number of fish to optimize the freezing condition. Considering this limitation, a surrogate fish species was used for the protocol development. This study was to establish the effective condition for Miho spine loach whole testis cryopreservation by optimizing the conditions for whole testis cryopreservation in an allied species, mud loach (Misgurnus mizolepis). The condition for whole testis cryopreservation was optimized in mud loach first, and then the optimal condition was applied to Miho spine loach testes. The optimal condition for mud loach testis cryopreservation consists of the freezing medium containing 1.3 M dimethyl sulfoxide, 6% fetal bovine serum and 0.3 M trehalose, -1 C/min cooling rate and 26 degree C thawing temperature, which also permits effective cryopreservation of Miho spine loach testes. An effective cryopreservation condition for whole testis of the endangered Miho spine loach has been established by using mud loach as a surrogate fish.

  4. Kinetic modeling of growth and lipid body induction in Chlorella pyrenoidosa under heterotrophic conditions.

    Sachdeva, Neha; Kumar, G Dinesh; Gupta, Ravi Prakash; Mathur, Anshu Shankar; Manikandan, B; Basu, Biswajit; Tuli, Deepak Kumar

    2016-10-01

    The aim of the present work was to develop a mathematical model to describe the biomass and (total) lipid productivity of Chlorella pyrenoidosa NCIM 2738 under heterotrophic conditions. Biomass growth rate was predicted by Droop's cell quota model, while changes observed in cell quota (utilization) under carbon excess conditions were used for the modeling and predicting the lipid accumulation rate. The model was simulated under non-limiting (excess) carbon and limiting nitrate concentration and validated with experimental data for the culture grown in batch (flask) mode under different nitrate concentrations. The present model incorporated two modes (growth and stressed) for the prediction of endogenous lipid synthesis/induction and aimed to predict the effect and response of the microalgae under nutrient starvation (stressed) conditions. MATLAB and Genetic Algorithm were employed for the prediction and validation of the model parameters. Copyright © 2016 Elsevier Ltd. All rights reserved.

  5. Metabolite profiling uncovers plasmid-induced cobalt limitation under methylotrophic growth conditions.

    Patrick Kiefer

    2009-11-01

    Full Text Available The introduction and maintenance of plasmids in cells is often associated with a reduction of growth rate. The reason for this growth reduction is unclear in many cases.We observed a surprisingly large reduction in growth rate of about 50% of Methylobacterium extorquens AM1 during methylotrophic growth in the presence of a plasmid, pCM80 expressing the tetA gene, relative to the wild-type. A less pronounced growth delay during growth under non-methylotrophic growth conditions was observed; this suggested an inhibition of one-carbon metabolism rather than a general growth inhibition or metabolic burden. Metabolome analyses revealed an increase in pool sizes of ethylmalonyl-CoA and methylmalonyl-CoA of more than 6- and 35-fold, respectively, relative to wild type, suggesting a strongly reduced conversion of these central intermediates, which are essential for glyoxylate regeneration in this model methylotroph. Similar results were found for M. extorquens AM1 pCM160 which confers kanamycin resistance. These intermediates of the ethylmalonyl-CoA pathway have in common their conversion by coenzyme B(12-dependent mutases, which have cobalt as a central ligand. The one-carbon metabolism-related growth delay was restored by providing higher cobalt concentrations, by heterologous expression of isocitrate lyase as an alternative path for glyoxylate regeneration, or by identification and overproduction of proteins involved in cobalt import.This study demonstrates that the introduction of the plasmids leads to an apparent inhibition of the cobalt-dependent enzymes of the ethylmalonyl-CoA pathway. Possible explanations are presented and point to a limited cobalt concentration in the cell as a consequence of the antibiotic stress.

  6. Optimizing an Investment Solution in Conditions of Uncertainty and Risk as a Multicriterial Task

    Kotsyuba Oleksiy S.

    2017-10-01

    Full Text Available The article is concerned with the methodology for optimizing investment decisions in conditions of uncertainty and risk. The subject area of the study relates, first of all, to real investment. The problem of modeling an optimal investment solution is considered to be a multicriterial task. Also, the constructive part of the publication is based on the position that the multicriteriality of objectives of investment projecting is the result, first, of the complex nature of the category of economic attractiveness (efficiency of real investment, and secondly, of the need to take into account the risk factor, which is a vector measure, in the preparation of an investment solution. An attempt has been made to develop an instrumentarium to optimize investment decisions in a situation of uncertainty and the risk it engenders, based on the use of roll-up of the local criteria. As a result of its implementation, a model has been proposed, which has the advantage that it takes into account, to a greater extent than is the case for standardized roll-up options, the contensive and formal features of the local (detailed criteria.

  7. Optimization of cardiovascular stent against restenosis: factorial design-based statistical analysis of polymer coating conditions.

    Gayathri Acharya

    Full Text Available The objective of this study was to optimize the physicodynamic conditions of polymeric system as a coating substrate for drug eluting stents against restenosis. As Nitric Oxide (NO has multifunctional activities, such as regulating blood flow and pressure, and influencing thrombus formation, a continuous and spatiotemporal delivery of NO loaded in the polymer based nanoparticles could be a viable option to reduce and prevent restenosis. To identify the most suitable carrier for S-Nitrosoglutathione (GSNO, a NO prodrug, stents were coated with various polymers, such as poly (lactic-co-glycolic acid (PLGA, polyethylene glycol (PEG and polycaprolactone (PCL, using solvent evaporation technique. Full factorial design was used to evaluate the effects of the formulation variables in polymer-based stent coatings on the GSNO release rate and weight loss rate. The least square regression model was used for data analysis in the optimization process. The polymer-coated stents were further assessed with Differential scanning calorimetry (DSC, Fourier transform infrared spectroscopy analysis (FTIR, Scanning electron microscopy (SEM images and platelet adhesion studies. Stents coated with PCL matrix displayed more sustained and controlled drug release profiles than those coated with PLGA and PEG. Stents coated with PCL matrix showed the least platelet adhesion rate. Subsequently, stents coated with PCL matrix were subjected to the further optimization processes for improvement of surface morphology and enhancement of the drug release duration. The results of this study demonstrated that PCL matrix containing GSNO is a promising system for stent surface coating against restenosis.

  8. Optimizing fermentation process miscanthus-to-ethanol biorefinery scale under uncertain conditions

    Bomberg, Matthew; Sanchez, Daniel L; Lipman, Timothy E

    2014-01-01

    Ethanol produced from cellulosic feedstocks has garnered significant interest for greenhouse gas abatement and energy security promotion. One outstanding question in the development of a mature cellulosic ethanol industry is the optimal scale of biorefining activities. This question is important for companies and entrepreneurs seeking to construct and operate cellulosic ethanol biorefineries as it determines the size of investment needed and the amount of feedstock for which they must contract. The question also has important implications for the nature and location of lifecycle environmental impacts from cellulosic ethanol. We use an optimization framework similar to previous studies, but add richer details by treating many of these critical parameters as random variables and incorporating a stochastic sub-model for land conversion. We then use Monte Carlo simulation to obtain a probability distribution for the optimal scale of a biorefinery using a fermentation process and miscanthus feedstock. We find a bimodal distribution with a high peak at around 10–30 MMgal yr −1 (representing circumstances where a relatively low percentage of farmers elect to participate in miscanthus cultivation) and a lower and flatter peak between 150 and 250 MMgal yr −1 (representing more typically assumed land-conversion conditions). This distribution leads to useful insights; in particular, the asymmetry of the distribution—with significantly more mass on the low side—indicates that developers of cellulosic ethanol biorefineries may wish to exercise caution in scale-up. (letters)

  9. Optimizing fermentation process miscanthus-to-ethanol biorefinery scale under uncertain conditions

    Bomberg, Matthew; Sanchez, Daniel L.; Lipman, Timothy E.

    2014-05-01

    Ethanol produced from cellulosic feedstocks has garnered significant interest for greenhouse gas abatement and energy security promotion. One outstanding question in the development of a mature cellulosic ethanol industry is the optimal scale of biorefining activities. This question is important for companies and entrepreneurs seeking to construct and operate cellulosic ethanol biorefineries as it determines the size of investment needed and the amount of feedstock for which they must contract. The question also has important implications for the nature and location of lifecycle environmental impacts from cellulosic ethanol. We use an optimization framework similar to previous studies, but add richer details by treating many of these critical parameters as random variables and incorporating a stochastic sub-model for land conversion. We then use Monte Carlo simulation to obtain a probability distribution for the optimal scale of a biorefinery using a fermentation process and miscanthus feedstock. We find a bimodal distribution with a high peak at around 10-30 MMgal yr-1 (representing circumstances where a relatively low percentage of farmers elect to participate in miscanthus cultivation) and a lower and flatter peak between 150 and 250 MMgal yr-1 (representing more typically assumed land-conversion conditions). This distribution leads to useful insights; in particular, the asymmetry of the distribution—with significantly more mass on the low side—indicates that developers of cellulosic ethanol biorefineries may wish to exercise caution in scale-up.

  10. Optimization on Pretreatment Conditions of Seaweed Liquid Waste for Bio ethanol Production

    Nur Zatul-Iffah Zakaria; Dachyar Arbain; Mohd Noor Ahmad; Mohd Irfan Hatim Mohamed Dzahir

    2015-01-01

    Seaweed liquid waste (SLW) from a non-conventional seaweed (Gracilaria sp.) drying process where the seaweed is ruptured and filter-squeezed has been investigated. The liquid contains proteins and minerals which potentially pollute the environment if it is not been properly treated. For that reason, this paper deals with study on the feasibility of SLW utilization as a feedstock for bio ethanol production. The fermentation of bio ethanol production was carried out by Saccharomyces cerevisiae in which ethanol produced was measured by gas chromatography. In order to increase its fermentable sugar content, the SLW was treated with dilute acid. Center composite design of response surface methodology (RSM) had been used to optimize the sugar content by varying the parameters involved in the dilute acid pretreatment conditions. These are sulphuric acid concentration (M), temperature (degree Celsius) and seaweed waste concentration (g/ ml). It was obtained that the R 2 value reached 0.97 indicating that the model is acceptable. The three parameters showed p-value less than 0.05 suggesting their significance interactions. The optimization resulted 25 times improvement of reducing sugar concentration. The reducing sugar resulting from the optimized pretreatment was later used as fermentation medium to produce ethanol up to 123.197 mg/ l. (author)

  11. Optimization of Electrochemical Treatment Process Conditions for Distillery Effluent Using Response Surface Methodology

    P. Arulmathi

    2015-01-01

    Full Text Available Distillery industry is recognized as one of the most polluting industries in India with a large amount of annual effluent production. In this present study, the optimization of electrochemical treatment process variables was reported to treat the color and COD of distillery spent wash using Ti/Pt as an anode in a batch mode. Process variables such as pH, current density, electrolysis time, and electrolyte dose were selected as operation variables and chemical oxygen demand (COD and color removal efficiency were considered as response variable for optimization using response surface methodology. Indirect electrochemical-oxidation process variables were optimized using Box-Behnken response surface design (BBD. The results showed that electrochemical treatment process effectively removed the COD (89.5% and color (95.1% of the distillery industry spent wash under the optimum conditions: pH of 4.12, current density of 25.02 mA/cm2, electrolysis time of 103.27 min, and electrolyte (NaCl concentration of 1.67 g/L, respectively.

  12. Optimization of Production Conditions for Protoplasts and Polyethylene Glycol-Mediated Transformation of Gaeumannomyces tritici.

    Wang, Mei; Zhang, Jie; Wang, Lanying; Han, Lirong; Zhang, Xing; Feng, Juntao

    2018-05-24

    Take-all, caused by Gaeumannomyces tritici , is one of the most important wheat root diseases worldwide, as it results in serious yield losses. In this study, G. tritici was transformed to express the hygromycin B phosphotransferase using a combined protoplast and polyethylene glycol (PEG)-mediated transformation technique. Based on a series of single-factor experimental results, three major factors-temperature, enzyme lysis time, and concentration of the lysing enzyme-were selected as the independent variables, which were optimized using the response surface methodology. A higher protoplast yield of 9.83 × 10⁷ protoplasts/mL was observed, and the protoplast vitality was also high, reaching 96.27% after optimization. Protoplasts were isolated under the optimal conditions, with the highest transformation frequency (46⁻54 transformants/μg DNA). Polymerase chain reaction and Southern blotting detection indicated that the genes of hygromycin phosphotransferase were successfully inserted into the genome of G. tritici . An optimised PEG-mediated protoplast transformation system for G. tritici was established. The techniques and procedures described will lay the foundation for establishing a good mutation library of G. tritici and could be used to transform other fungi.

  13. Studies of mineralization in tissue culture: optimal conditions for cartilage calcification

    Boskey, A. L.; Stiner, D.; Doty, S. B.; Binderman, I.; Leboy, P.

    1992-01-01

    The optimal conditions for obtaining a calcified cartilage matrix approximating that which exists in situ were established in a differentiating chick limb bud mesenchymal cell culture system. Using cells from stage 21-24 embryos in a micro-mass culture, at an optimal density of 0.5 million cells/20 microliters spot, the deposition of small crystals of hydroxyapatite on a collagenous matrix and matrix vesicles was detected by day 21 using X-ray diffraction, FT-IR microscopy, and electron microscopy. Optimal media, containing 1.1 mM Ca, 4 mM P, 25 micrograms/ml vitamin C, 0.3 mg/ml glutamine, no Hepes buffer, and 10% fetal bovine serum, produced matrix resembling the calcifying cartilage matrix of fetal chick long bones. Interestingly, higher concentrations of fetal bovine serum had an inhibitory effect on calcification. The cartilage phenotype was confirmed based on the cellular expression of cartilage collagen and proteoglycan mRNAs, the presence of type II and type X collagen, and cartilage type proteoglycan at the light microscopic level, and the presence of chondrocytes and matrix vesicles at the EM level. The system is proposed as a model for evaluating the events in cell mediated cartilage calcification.

  14. Optimization of operating conditions in oxidation of dibenzothiophene in the light hydrocarbon model

    Akbari Azam

    2014-01-01

    Full Text Available In this research, the effects of process variables on the efficiency and mechanism of dibenzothiophene oxidation in formicacid/H2O2 system for deep desulfurization of a light hydrocarbon model were systematically studied by statistical modelling and optimization using response surface methodology and implementing the central composite design. A quadratic regression model was developed to predict the yield of sulfur oxidation as the model response. The model indicated that temperature was the most significant effective factor and suggested an important interaction between temperature and H2O2/sulfur ratio; at temperatures above 56°C, more excess oxidant was necessary because of instability of active peroxo intermediates and loss of H2O2 due to thermal decomposition. In contrast, the water hindrance effect of H2O2 aqueous solution in desulfurization progress was more significant at temperatures bellow 56°C. In the optimization process, minimizing H2O2/sulfur ratio and catalyst consumption for maximum yield of desulfurization was economically considerable. The optimal condition was obtained at temperature of 57 °C, H2O2/sulfur ratio of 2.5 mol/mol and catalyst dosage of 0.82 mL in 50 mL solution of DBT in n-hexane leading to a maximum oxidation yield of 95% after 1 hour reaction. Good agreement between predicted and experimental results (less than 4% error was found.

  15. Thermal and economical optimization of air conditioning units with vapor compression refrigeration system

    Sanaye, S.; Malekmohammadi, H.R. [Iran University of Science and Technology, Tehran (Iran). Dept. of Mechanical Engineering

    2004-09-01

    A new method of thermal and economical optimum design of air conditioning units with vapor compression refrigeration system, is presented. Such a system includes compressor, condenser, evaporator, centrifugal and axial fans. Evaporator and condenser temperatures, their heating surface areas (frontal surface area and number of tubes), centrifugal and axial fan powers, and compressor power are among the design variables. The data provided by manufacturers for fan (volume flow rate versus pressure drop) and compressor power (using evaporator and condenser temperatures) was used to choose these components directly from available data for consumers. To study the performance of the system under various situations, and implementing the optimization procedure, a simulation program including all thermal and geometrical parameters was developed. The objective function for optimization was the total cost per unit cooling load of the system including capital investment for components as well as the required electricity cost. To find the system design parameters, this objective function was minimized by Lagrange multipliers method. The effects of changing the cooling load on optimal design parameters were studied. (author)

  16. Optimization of enzymatic hydrolysis and fermentation conditions for improved bioethanol production from potato peel residues.

    Ben Taher, Imen; Fickers, Patrick; Chniti, Sofien; Hassouna, Mnasser

    2017-03-01

    The aim of this work was the optimization of the enzyme hydrolysis of potato peel residues (PPR) for bioethanol production. The process included a pretreatment step followed by an enzyme hydrolysis using crude enzyme system composed of cellulase, amylase and hemicellulase, produced by a mixed culture of Aspergillus niger and Trichoderma reesei. Hydrothermal, alkali and acid pretreatments were considered with regards to the enhancement of enzyme hydrolysis of potato peel residues. The obtained results showed that hydrothermal pretreatment lead to a higher enzyme hydrolysis yield compared to both acid and alkali pretreatments. Enzyme hydrolysis was also optimized for parameters such as temperature, pH, substrate loading and surfactant loading using a response surface methodology. Under optimized conditions, 77 g L -1 of reducing sugars were obtained. Yeast fermentation of the released reducing sugars led to an ethanol titer of 30 g L -1 after supplementation of the culture medium with ammonium sulfate. Moreover, a comparative study between acid and enzyme hydrolysis of potato peel residues was investigated. Results showed that enzyme hydrolysis offers higher yield of bioethanol production than acid hydrolysis. These results highlight the potential of second generation bioethanol production from potato peel residues treated with onsite produced hydrolytic enzymes. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:397-406, 2017. © 2017 American Institute of Chemical Engineers.

  17. Optimization of recirculating laminar air flow in operating room air conditioning systems

    Enver Yalcin

    2016-04-01

    Full Text Available The laminar flow air-conditioning system with 100% fresh air is used in almost all operating rooms without discrimination in Turkey. The laminar flow device which is working with 100% fresh air should be absolutely used in Type 1A operating rooms. However, there is not mandatory to use of 100% fresh air for Type 1B defined as places performed simpler operation. Compared with recirculating laminar flow, energy needs of the laminar flow with 100 % fresh air has been emerged about 40% more than re-circulated air flow. Therefore, when a recirculating laminar flow device is operated instead of laminar flow system with 100% fresh air in the Type 1B operating room, annual energy consumption will be reduced. In this study, in an operating room with recirculating laminar flow, optimal conditions have been investigated in order to obtain laminar flow form by analyzing velocity distributions at various supply velocities by using computational fluid dynamics method (CFD.

  18. Optimization of Cultivation and Storage Conditions on Red Cabbage Seed Sprouts

    Baek, K.H.; Jo, D.J.; Park, J.H.; Kwon, J.H.; Kim, G.R.; Lee, G.D.; Kim, J.S.; Kim, Y.R.; Han, B.S.; Yoon, S.R.

    2013-01-01

    This study was carried out to find the optimal conditions for red cabbage seed sprouts in terms of their physicochemical and sensory qualities by electron-beam irradiation, cultivation and storage using the response surface methodology (RSM). Moisture content (R2 = 0.9638) was affected by irradiation dose and cultivation time. Total phenolics content (R2 = 0.9117) was mainly affected by irradiation dose, but carotenoid content (R2 = 0.8338) was affected in the order of irradiation dose, cultivation time and storage time. Sensory properties were also affected by irradiation dose, and thus scores decreased as irradiation dose increased. The optimum conditions estimated by superimposing total phenolics content and overall acceptance were 2.2-3.8 kGy of the irradiation dose, 3.0-4.0 days of cultivation and 2.0-3.0 days of storage

  19. OPTIMIZATION OF MICROWAVE AND AIR DRYING CONDITIONS OF QUINCE (CYDONIA OBLONGA, MILLER USING RESPONSE SURFACE METHODOLOGY

    Cem Baltacioglu

    2015-03-01

    Full Text Available Effects of slice thickness of quince (Cydonia oblonga Miller , microwave incident power and air drying temperature on antioxidant activity and total phenolic content of quince were investigated during drying in microwave and air drying. Optimum conditions were found to be: i for microwave drying, 285 W and 4.14 mm thick (maximum antioxidant activity and 285 W and 6.85 mm thick (maximum total phenolic content, and ii for air drying, 75 ºC and 1.2 mm thick (both maximum antioxidant activity and total phenolic content. Drying conditions were optimized by using the response surface methodology. 13 experiments were carried out considering incident microwave powers from 285 to 795 W, air temperature from 46 to 74 ºC and slice thickness from 1.2 to 6.8 mm.

  20. Simplified model-based optimal control of VAV air-conditioning system

    Nassif, N.; Kajl, S.; Sabourin, R. [Ecole de Technologie Superieure, Montreal, PQ (Canada). Dept. of Construction Engineering

    2005-07-01

    The improvement of Variable Air Volume (VAV) system performance is one of several attempts being made to minimize the high energy use associated with the operation of heating, ventilation and air conditioning (HVAC) systems. A Simplified Optimization Process (SOP) comprised of controller set point strategies and a simplified VAV model was presented in this paper. The aim of the SOP was to determine supply set points. The advantage of the SOP over previous methods was that it did not require a detailed VAV model and optimization program. In addition, the monitored data for representative local-loop control can be checked on-line, after which controller set points can be updated in order to ensure proper operation by opting for real situations with minimum energy use. The SOP was validated using existing monitoring data and a model of an existing VAV system. Energy use simulations were compared to that of the existing VAV system. At each simulation step, 3 controller set point values were proposed and studied using the VAV model in order to select a value for each point which corresponded to the best performance of the VAV system. Simplified VAV component models were presented. Strategies for controller set points were described, including zone air temperature, duct static pressure set points; chilled water supply set points and supply air temperature set points. Simplified optimization process calculations were presented. Results indicated that the SOP provided significant energy savings when applied to specific AHU systems. In a comparison with a Detailed Optimization Process (DOP), the SOP was capable of determining set points close to those obtained by the DOP. However, it was noted that the controller set points determined by the SOP need a certain amount of time to reach optimal values when outdoor conditions or thermal loads are significantly changed. It was suggested that this disadvantage could be overcome by the use of a dynamic incremental value, which

  1. A global review of freshwater crayfish temperature tolerance, preference, and optimal growth

    Westhoff, Jacob T.; Rosenberger, Amanda E.

    2016-01-01

    Conservation efforts, environmental planning, and management must account for ongoing ecosystem alteration due to a changing climate, introduced species, and shifting land use. This type of management can be facilitated by an understanding of the thermal ecology of aquatic organisms. However, information on thermal ecology for entire taxonomic groups is rarely compiled or summarized, and reviews of the science can facilitate its advancement. Crayfish are one of the most globally threatened taxa, and ongoing declines and extirpation could have serious consequences on aquatic ecosystem function due to their significant biomass and ecosystem roles. Our goal was to review the literature on thermal ecology for freshwater crayfish worldwide, with emphasis on studies that estimated temperature tolerance, temperature preference, or optimal growth. We also explored relationships between temperature metrics and species distributions. We located 56 studies containing information for at least one of those three metrics, which covered approximately 6 % of extant crayfish species worldwide. Information on one or more metrics existed for all 3 genera of Astacidae, 4 of the 12 genera of Cambaridae, and 3 of the 15 genera of Parastacidae. Investigations employed numerous methodological approaches for estimating these parameters, which restricts comparisons among and within species. The only statistically significant relationship we observed between a temperature metric and species range was a negative linear relationship between absolute latitude and optimal growth temperature. We recommend expansion of studies examining the thermal ecology of freshwater crayfish and identify and discuss methodological approaches that can improve standardization and comparability among studies.

  2. Evaluation of growth and flowering of Chenopodium quinoa Willd. under Polish conditions

    Krzysztof Gęsiński

    2012-12-01

    Full Text Available The material presented refers to the estimation of growth and the flowering (Chenopodium quinoa Willd. under Polish conditions. The species has been a South-American pseudocereal cultivated in the traditional form in the Andean region for over 5 thousand years. Its advantage, apart from low soil and climate requirements, is that it shows high nutritive value. The Chenopodium quinoa protein is especially valuable with its amino acid composition which is better balanced than that of wheat or maize. It shows a better share of egzogenic aminoacids. Field examinations were carried out in 1999-2001 at the Experiment Station of Cultivar Testing at Chrząstowo. The experiment involved two cultivars from two various growing regions: America and Europe. Analyses were made to include development stages, plant growth dynamics, inflorescences development dynamics, inflorescence habit and flowering. Differences were recorded in the growth and development models of the cultivars researched. The European cultivar had a short compact inflorescence with a short flowering period, reaching 120 cm. American cultivar plants were high (160 cm; they showed a slower continuous growth, loose big-in-size inflorescence, and a long period of flowering. The plants ended their growing season over the flowering stage or seed formation. The adequate growth, the course of flowering and, as a result, a stable yielding of the European cultivar make the group suitable for the cultivation under Polish conditions. This breeding group should also be the parent material for the cultivation of the Polish cultivar of Chenopodium quinoa.

  3. Conditional expression of constitutively active estrogen receptor {alpha} in chondrocytes impairs longitudinal bone growth in mice

    Ikeda, Kazuhiro [Division of Gene Regulation and Signal Transduction, Research Center for Genomic Medicine, Saitama Medical University, Saitama (Japan); Tsukui, Tohru [Experimental Animal Laboratory, Research Center for Genomic Medicine, Saitama Medical University, Saitama (Japan); Imazawa, Yukiko; Horie-Inoue, Kuniko [Division of Gene Regulation and Signal Transduction, Research Center for Genomic Medicine, Saitama Medical University, Saitama (Japan); Inoue, Satoshi, E-mail: INOUE-GER@h.u-tokyo.ac.jp [Division of Gene Regulation and Signal Transduction, Research Center for Genomic Medicine, Saitama Medical University, Saitama (Japan); Department of Geriatric Medicine, Graduate School of Medicine, The University of Tokyo, Tokyo (Japan); Department of Anti-Aging Medicine, Graduate School of Medicine, The University of Tokyo, Tokyo (Japan)

    2012-09-07

    Highlights: Black-Right-Pointing-Pointer Conditional transgenic mice expressing constitutively active estrogen receptor {alpha} (caER{alpha}) in chondrocytes were developed. Black-Right-Pointing-Pointer Expression of caER{alpha} in chondrocytes impaired longitudinal bone growth in mice. Black-Right-Pointing-Pointer caER{alpha} affects chondrocyte proliferation and differentiation. Black-Right-Pointing-Pointer This mouse model is useful for understanding the physiological role of ER{alpha}in vivo. -- Abstract: Estrogen plays important roles in the regulation of chondrocyte proliferation and differentiation, which are essential steps for longitudinal bone growth; however, the mechanisms of estrogen action on chondrocytes have not been fully elucidated. In the present study, we generated conditional transgenic mice, designated as caER{alpha}{sup ColII}, expressing constitutively active mutant estrogen receptor (ER) {alpha} in chondrocytes, using the chondrocyte-specific type II collagen promoter-driven Cre transgenic mice. caER{alpha}{sup ColII} mice showed retardation in longitudinal growth, with short bone lengths. BrdU labeling showed reduced proliferation of hypertrophic chondrocytes in the proliferating layer of the growth plate of tibia in caER{alpha}{sup ColII} mice. In situ hybridization analysis of type X collagen revealed that the maturation of hypertrophic chondrocytes was impaired in caER{alpha}{sup ColII} mice. These results suggest that ER{alpha} is a critical regulator of chondrocyte proliferation and maturation during skeletal development, mediating longitudinal bone growth in vivo.

  4. Conditional expression of constitutively active estrogen receptor α in chondrocytes impairs longitudinal bone growth in mice

    Ikeda, Kazuhiro; Tsukui, Tohru; Imazawa, Yukiko; Horie-Inoue, Kuniko; Inoue, Satoshi

    2012-01-01

    Highlights: ► Conditional transgenic mice expressing constitutively active estrogen receptor α (caERα) in chondrocytes were developed. ► Expression of caERα in chondrocytes impaired longitudinal bone growth in mice. ► caERα affects chondrocyte proliferation and differentiation. ► This mouse model is useful for understanding the physiological role of ERαin vivo. -- Abstract: Estrogen plays important roles in the regulation of chondrocyte proliferation and differentiation, which are essential steps for longitudinal bone growth; however, the mechanisms of estrogen action on chondrocytes have not been fully elucidated. In the present study, we generated conditional transgenic mice, designated as caERα ColII , expressing constitutively active mutant estrogen receptor (ER) α in chondrocytes, using the chondrocyte-specific type II collagen promoter-driven Cre transgenic mice. caERα ColII mice showed retardation in longitudinal growth, with short bone lengths. BrdU labeling showed reduced proliferation of hypertrophic chondrocytes in the proliferating layer of the growth plate of tibia in caERα ColII mice. In situ hybridization analysis of type X collagen revealed that the maturation of hypertrophic chondrocytes was impaired in caERα ColII mice. These results suggest that ERα is a critical regulator of chondrocyte proliferation and maturation during skeletal development, mediating longitudinal bone growth in vivo.

  5. Unfolded protein response is required for Aspergillus oryzae growth under conditions inducing secretory hydrolytic enzyme production.

    Tanaka, Mizuki; Shintani, Takahiro; Gomi, Katsuya

    2015-12-01

    Unfolded protein response (UPR) is an intracellular signaling pathway for adaptation to endoplasmic reticulum (ER) stress. In yeast UPR, Ire1 cleaves the unconventional intron of HAC1 mRNA, and the functional Hac1 protein translated from the spliced HAC1 mRNA induces the expression of ER chaperone genes and ER-associated degradation genes for the refolding or degradation of unfolded proteins. In this study, we constructed an ireA (IRE1 ortholog) conditionally expressing strain of Aspergillus oryzae, a filamentous fungus producing a large amount of amylolytic enzymes, and examined the contribution of UPR to ER stress adaptation under physiological conditions. Repression of ireA completely blocked A. oryzae growth under conditions inducing the production of hydrolytic enzymes, such as amylases and proteases. This growth defect was restored by the introduction of unconventional intronless hacA (hacA-i). Furthermore, UPR was observed to be induced by amylolytic gene expression, and the disruption of the transcriptional activator for amylolytic genes resulted in partial growth restoration of the ireA-repressing strain. In addition, a homokaryotic ireA disruption mutant was successfully generated using the strain harboring hacA-i as a parental host. These results indicated that UPR is required for A. oryzae growth to alleviate ER stress induced by excessive production of hydrolytic enzymes. Copyright © 2015 Elsevier Inc. All rights reserved.

  6. Assessing the effects of adaptation measures on optimal water resources allocation under varied water availability conditions

    Liu, Dedi; Guo, Shenglian; Shao, Quanxi; Liu, Pan; Xiong, Lihua; Wang, Le; Hong, Xingjun; Xu, Yao; Wang, Zhaoli

    2018-01-01

    Human activities and climate change have altered the spatial and temporal distribution of water availability which is a principal prerequisite for allocation of different water resources. In order to quantify the impacts of climate change and human activities on water availability and optimal allocation of water resources, hydrological models and optimal water resource allocation models should be integrated. Given that increasing human water demand and varying water availability conditions necessitate adaptation measures, we propose a framework to assess the effects of these measures on optimal allocation of water resources. The proposed model and framework were applied to a case study of the middle and lower reaches of the Hanjiang River Basin in China. Two representative concentration pathway (RCP) scenarios (RCP2.6 and RCP4.5) were employed to project future climate, and the Variable Infiltration Capacity (VIC) hydrological model was used to simulate the variability of flows under historical (1956-2011) and future (2012-2099) conditions. The water availability determined by simulating flow with the VIC hydrological model was used to establish the optimal water resources allocation model. The allocation results were derived under an extremely dry year (with an annual average water flow frequency of 95%), a very dry year (with an annual average water flow frequency of 90%), a dry year (with an annual average water flow frequency of 75%), and a normal year (with an annual average water flow frequency of 50%) during historical and future periods. The results show that the total available water resources in the study area and the inflow of the Danjiangkou Reservoir will increase in the future. However, the uneven distribution of water availability will cause water shortage problems, especially in the boundary areas. The effects of adaptation measures, including water saving, and dynamic control of flood limiting water levels (FLWLs) for reservoir operation, were

  7. Optimization, selection and feasibility study of solar parabolic trough power plants for Algerian conditions

    Boukelia, T.E.; Mecibah, M.S.; Kumar, B.N.; Reddy, K.S.

    2015-01-01

    Highlights: • Evaluation of solar resources in the absence of measured data. • Optimization of 2 PTSTPPs integrated with TES and FBS and using oil and salt as HTFs. • 4E comparative study of the two optimized plants alongside the Andasol 1 plant. • The salt plant resulting as the best one and has been chosen for the viability study. • Tamanrasset is the best location for construction of PTSTPPs. - Abstract: In the present study, optimization of two parabolic trough solar thermal power plants integrated with thermal energy storage (TES), and fuel backup system (FBS) has been performed. The first plant uses Therminol VP-1 as heat transfer fluid in the solar field and the second plant uses molten salt. The optimization is carried out with solar multiple (SM) and full load hours of TES as the parameters, with an objective of minimizing the levelized cost of electricity (LCOE) and maximizing the annual energy yield. A 4E (energy–exergy–environment–economic) comparison of the optimized plants alongside the Andasol 1 as reference plant is studied. The molten salt plant resulting as the best technology, from the optimization and 4E comparative study has been chosen for the viability analysis of ten locations in Algeria with semi-arid and arid climatic conditions. The results indicate that Andasol 1 reference plant has the highest mean annual energy efficiency (17.25%) and exergy efficiency (23.30%). Whereas, the highest capacity factor (54.60%) and power generation (236.90 GW h) are exhibited by the molten salt plant. The molten salt plant has least annual water usage of about 800,482 m 3 , but demands more land for the operation. Nevertheless the oil plant emits the lowest amount of CO 2 gas (less than 40.3 kilo tonnes). From the economic viewpoint, molten salt seems to be the best technology compared to other plants due to its lowest investment cost (less than 360 million dollars) and lower levelized cost of electricity (LCOE) (8.48 ¢/kW h). The

  8. Aconitase B is required for optimal growth of Xanthomonas campestris pv. vesicatoria in pepper plants.

    Janine Kirchberg

    Full Text Available The aerobic plant pathogenic bacterium Xanthomonas campestris pv. vesicatoria (Xcv colonizes the intercellular spaces of pepper and tomato. One enzyme that might contribute to the successful proliferation of Xcv in the host is the iron-sulfur protein aconitase, which catalyzes the conversion of citrate to isocitrate in the tricarboxylic acid (TCA cycle and might also sense reactive oxygen species (ROS and changes in cellular iron levels. Xcv contains three putative aconitases, two of which, acnA and acnB, are encoded by a single chromosomal locus. The focus of this study is aconitase B (AcnB. acnB is co-transcribed with two genes, XCV1925 and XCV1926, encoding putative nucleic acid-binding proteins. In vitro growth of acnB mutants was like wild type, whereas in planta growth and symptom formation in pepper plants were impaired. While acnA, XCV1925 or XCV1926 mutants showed a wild-type phenotype with respect to bacterial growth and in planta symptom formation, proliferation of the acnB mutant in susceptible pepper plants was significantly impaired. Furthermore, the deletion of acnB led to reduced HR induction in resistant pepper plants and an increased susceptibility to the superoxide-generating compound menadione. As AcnB complemented the growth deficiency of an Escherichia coli aconitase mutant, it is likely to be an active aconitase. We therefore propose that optimal growth and survival of Xcv in pepper plants depends on AcnB, which might be required for the utilization of citrate as carbon source and could also help protect the bacterium against oxidative stress.

  9. Bulk water phase and biofilm growth in drinking water at low nutrient conditions.

    Boe-Hansen, Rasmus; Albrechtsen, Hans-Jørgen; Arvin, Erik; Jørgensen, Claus

    2002-11-01

    In this study, the bacterial growth dynamics of a drinking water distribution system at low nutrient conditions was studied in order to determine bacterial growth rates by a range of methods, and to compare growth rates in the bulk water phase and the biofilm. A model distribution system was used to quantify the effect of retention times at hydraulic conditions similar to those in drinking water distribution networks. Water and pipe wall samples were taken and examined during the experiment. The pipes had been exposed to drinking water at approximately 13 degrees C, for at least 385 days to allow the formation of a mature quasi-stationary biofilm. At retention times of 12 h, total bacterial counts increased equivalent to a net bacterial growth rate of 0.048 day(-1). The bulk water phase bacteria exhibited a higher activity than the biofilm bacteria in terms of culturability, cell-specific ATP content, and cell-specific leucine incorporation rate. Bacteria in the bulk water phase incubated without the presence of biofilm exhibited a bacterial growth rate of 0.30 day(-1). The biofilm was radioactively labelled by the addition of 14C-benzoic acid. Subsequently, a biofilm detachment rate of 0.013 day(-1) was determined by measuring the release of 14C-labelled bacteria of the biofilm. For the quasi-stationary phase biofilm, the detachment rate was equivalent to the net growth rate. The growth rates determined in this study by different independent experimental approaches were comparable and within the range of values reported in the literature.

  10. SnS absorber thin films by co-evaporation: Optimization of the growth rate and influence of the annealing

    Robles, Víctor, E-mail: victor.robles@ciemat.es; Trigo, Juan Francisco; Guillén, Cecilia; Herrero, José

    2015-05-01

    Tin sulfide thin films were prepared by co-evaporation on soda-lime glass substrates, for use as absorber layers. The synthesis was carried out at 350 °C substrate temperature and varying the growth rate in the 2-6 Å/s range, adjusting the deposition time in order to obtain thicknesses in the 700-1500 nm range. After evaporation, the samples were heated at 400 °C and 500 °C under various atmospheres. The evolution of the morphological, structural and optical properties has been analyzed as a function of the thickness and deposition rate, before and after annealing. For the samples grown at the lowest rate, SnS and Sn{sub 2}S{sub 3} phase mixing has been observed by X-ray diffraction. Samples with reduced thickness preferably crystallize in the SnS phase, whereas thicker layers become richer in the Sn{sub 2}S{sub 3} phase. The sulfur treatment of samples prepared at the lowest rate results in the formation of SnS{sub 2} phase. Otherwise, the samples obtained at the highest rates show single-phase SnS after heating at 400 °C in sulfur atmosphere, with gap energy values around 1.24 eV. - Highlights: • Tin sulfide thin films were deposited by co-evaporation at different growth rates. • The influence of the growth rate and post-annealing at different conditions was studied. • The SnS phase was obtained by optimizing the growth rate and the annealing process. • The SnS phase presented properties for use as absorber layer.

  11. Screening a strain of Aspergillus niger and optimization of fermentation conditions for degradation of aflatoxin B₁.

    Zhang, Wei; Xue, Beibei; Li, Mengmeng; Mu, Yang; Chen, Zhihui; Li, Jianping; Shan, Anshan

    2014-11-13

    Aflatoxin B₁, a type of highly toxic mycotoxin produced by some species belonging to the Aspergillus genus, such as Aspergillus flavus and Aspergillus parasiticus, is widely distributed in feed matrices. Here, coumarin was used as the sole carbon source to screen microorganism strains that were isolated from types of feed ingredients. Only one isolate (ND-1) was able to degrade aflatoxin B₁ after screening. ND-1 isolate, identified as a strain of Aspergillus niger using phylogenetic analysis on the basis of 18S rDNA, could remove 26.3% of aflatoxin B₁ after 48 h of fermentation in nutrient broth (NB). Optimization of fermentation conditions for aflatoxin B₁ degradation by selected Aspergillus niger was also performed. These results showed that 58.2% of aflatoxin B₁ was degraded after 24 h of culture under the optimal fermentation conditions. The aflatoxin B₁ degradation activity of Aspergillus niger supernatant was significantly stronger than cells and cell extracts. Furthermore, effects of temperature, heat treatment, pH, and metal ions on aflatoxin B₁ degradation by the supernatant were examined. Results indicated that aflatoxin B₁ degradation of Aspergillus niger is enzymatic and this process occurs in the extracellular environment.

  12. Simultaneous topography and recognition imaging: physical aspects and optimal imaging conditions

    Preiner, Johannes; Ebner, Andreas; Zhu Rong; Hinterdorfer, Peter; Chtcheglova, Lilia

    2009-01-01

    Simultaneous topography and recognition imaging (TREC) allows for the investigation of receptor distributions on natural biological surfaces under physiological conditions. Based on atomic force microscopy (AFM) in combination with a cantilever tip carrying a ligand molecule, it enables us to sense topography and recognition of receptor molecules simultaneously with nanometre accuracy. In this study we introduce optimized handling conditions and investigate the physical properties of the cantilever-tip-sample ensemble, which is essential for the interpretation of the experimental data gained from this technique. In contrast to conventional AFM methods, TREC is based on a more sophisticated feedback loop, which enables us to discriminate topographical contributions from recognition events in the AFM cantilever motion. The features of this feedback loop were investigated through a detailed analysis of the topography and recognition data obtained on a model protein system. Single avidin molecules immobilized on a mica substrate were imaged with an AFM tip functionalized with a biotinylated IgG. A simple procedure for adjusting the optimal amplitude for TREC imaging is described by exploiting the sharp localization of the TREC signal within a small range of oscillation amplitudes. This procedure can also be used for proving the specificity of the detected receptor-ligand interactions. For understanding and eliminating topographical crosstalk in the recognition images we developed a simple theoretical model, which nicely explains its origin and its dependence on the excitation frequency.

  13. Statistical optimization for alkali pretreatment conditions of narrow-leaf cattail by response surface methodology

    Arrisa Ruangmee

    2013-08-01

    Full Text Available Response surface methodology with central composite design was applied to optimize alkali pretreatment of narrow-leafcattail (Typha angustifolia. Joint effects of three independent variables; NaOH concentration (1-5%, temperature (60-100 ºC,and reaction time (30-150 min, were investigated to evaluate the increase in and the improvement of cellulosic componentscontained in the raw material after pretreatment. The combined optimum condition based on the cellulosic content obtainedfrom this study is: a concentration of 5% NaOH, a reaction time of 120 min, and a temperature of 100 ºC. This result has beenanalyzed employing ANOVA with a second order polynomial equation. The model was found to be significant and was able topredict accurately the response of strength at less than 5% error. Under this combined optimal condition, the desirable cellulosic content in the sample increased from 38.5 to 68.3%, while the unfavorable hemicellulosic content decreased from 37.6 to7.3%.

  14. Optimization of Conditions for In Vitro Culture of the Microphallid Digenean Gynaecotyla adunca

    Jenna West

    2014-01-01

    Full Text Available In vitro cultivation of digeneans would aid the development of effective treatments and studies of the biology of the parasites. The goal of this study was to optimize culture conditions for the trematode, Gynaecotyla adunca. Metacercariae of the parasite from fiddler crabs, Uca pugnax, excysted in trypsin, were incubated overnight to permit fertilization, and were cultured in different conditions to find those that resulted in maximum worm longevity and egg production. When cultured in media lacking serum, worms lived longer in Hanks balanced salt solution and Dulbecco’s Modified Eagle medium/F-12 (DME/F-12 than in RPMI-1640 but produced the most eggs in DME/F-12. Worm longevity and egg production increased when worms were grown in DME/F-12 supplemented with 20% chicken, horse, or newborn calf serum but the greatest number of eggs was deposited in cultures containing horse or chicken serum. Horse serum was chosen over chicken serum due to the formation of a precipitate in chicken serum. The optimal concentration of horse serum with respect to egg production ranged from 5 to 20%. Infectivity of eggs deposited by worms in culture was tested by feeding eggs to mud snails, Ilyanassa obsoleta. None of these snails produced G. adunca cercariae.

  15. Optimization on Preparation Conditions of Salidroside Liposome and Its Immunological Activity on PCV-2 in Mice

    Yibo Feng

    2015-01-01

    Full Text Available The aim of this study was to optimize the preparation conditions of salidroside liposome with high encapsulation efficiency (EE and to study the immunological enhancement activity of salidroside liposome as porcine circovirus type 2 virus (PCV-2 vaccine adjuvant. Response surface methodology (RSM was selected to optimize the conditions for the preparation of salidroside liposome using Design-Expert V8.0.6 software. Three kinds of salidroside liposome adjuvants were prepared to study their adjuvant activity. BALB/c mice were immunized with PCV-2 encapsulated in different kinds of salidroside liposome adjuvants. The PCV-2-specific IgG in immunized mice serum was determined with ELISA. The results showed that when the concentration of ammonium sulfate was 0.26 mol·L−1, ethanol volume 6.5 mL, temperature 43°C, ethanol injection rate 3 mL·min−1, and salidroside liposome could be prepared with high encapsulation efficiency of 94.527%. Salidroside liposome as adjuvant could rapidly induce the production of PCV-2-specific IgG and salidroside liposome I adjuvant proved to provide the best effect among the three kinds of salidroside liposome adjuvants.

  16. Optimization of papain hydrolysis conditions for release of glycosaminoglycans from the chicken keel cartilage

    Le Vien, Nguyen Thi; Nguyen, Pham Bao; Cuong, Lam Duc; An, Trinh Thi Thua; Dao, Dong Thi Anh

    2017-09-01

    Glycosaminoglycans (GAGs) are natural biocompounds which join to construct cartilage tissuses, it can be extracted from cartilage of sharks, pigs, cows, chickens, etc. GAGs contain a Chondroitin sulfate (CS) content which is a supplement of functional food used for preventing and supporting treatment of arthritis and eye diseases. Therefore, the GAGs extraction from byproducts of the industry of cattle and poultry slaughter to identify the CS content by papain enzyme is necessary. In this study, the optimal hydrolysis conditions were obtained by response surface methodology (RSM). The independent variables were coded as: pH (x1), enzyme concentration (x2), incubation temperature (x3) and hydrolysis time (x4). The results of the analysis of variance (ANOVA) shown that the variables actively affected GAGs content. The optimal conditions of hydrolysis were derived at pH of 7.1, ratio of enzyme per substances of 0.62% w/wpo, temperature of 65°C and hydrolysis time of 230 minutes, GAGs content reached 14.3% of the dry matter of raw material. Analyzes by HPLC revealed that 56.17% of the dry preparations of GAGs were CS compound, were equivalent to 8.11% of the dry matter of chicken keel cartilage. Molecular weight of the dry preparations GAGs was 259.6 kDa. The dry preparations included the contents of moisture 12.2%, protein 8.42%, lipid 0%, ash 10.03% and extracted GAGs 69.35%.

  17. Optimization of simultaneous saccharification and fermentation conditions with amphipathic lignin derivatives for concentrated bioethanol production.

    Cheng, Ningning; Koda, Keiichi; Tamai, Yutaka; Yamamoto, Yoko; Takasuka, Taichi E; Uraki, Yasumitsu

    2017-05-01

    Amphipathic lignin derivatives (A-LDs) prepared from the black liquor of soda pulping of Japanese cedar are strong accelerators for bioethanol production under a fed-batch simultaneous enzymatic saccharification and fermentation (SSF) process. To improve the bioethanol production concentration, conditions such as reaction temperature, stirring program, and A-LDs loadings were optimized in both small scale and large scale fed-batch SSF. The fed-batch SSF in the presence of 3.0g/L A-LDs at 38°C gave the maximum ethanol production and a high enzyme recovery rate. Furthermore, a jar-fermenter equipped with a powerful mechanical stirrer was designed for 1.5L-scale fed-batch SSF to achieve rigorous mixing during high substrate loading. Finally, the 1.5L fed-batch SSF with a substrate loading of 30% (w/v) produced a high ethanol concentration of 87.9g/L in the presence of A-LDs under optimized conditions. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

  18. Safer operating conditions and optimal scaling-up process for cyclohexanone peroxide reaction

    Zang, Na; Qian, Xin-Ming; Liu, Zhen-Yi; Shu, Chi-Min

    2015-01-01

    Highlights: • Thermal hazard of cyclohexanone peroxide reaction was measured by experimental techniques. • Levenberg–Marquardt algorithm was adopted to evaluate kinetic parameters. • Safer operating conditions at laboratory scale were acquired by BDs and TDs. • The verified safer operating conditions were used to obtain the optimal scale-up parameters applied in industrial plants. - Abstract: The cyclohexanone peroxide reaction process, one of the eighteen hazardous chemical processes identified in China, is performed in indirectly cooled semibatch reactors. The peroxide reaction is added to a mixture of hydrogen peroxide and nitric acid, which form heterogeneous liquid–liquid systems. A simple and general procedure for building boundary and temperature diagrams of peroxide process is given here to account for the overall kinetic expressions. Such a procedure has been validated by comparison with experimental data. Thermally safer operating parameters were obtained at laboratory scale, and the scaled-up procedure was performed to give the minimum dosing time in an industrial plant, which is in favor of maximizing industrial reactor productivity. The results are of great significance for governing the peroxide reaction process apart from the thermal runaway region. It also greatly aids in determining optimization on operating parameters in industrial plants.

  19. Fermentation Conditions and Media Optimization for Isocitric Acid Production from Ethanol by Yarrowia lipolytica

    Svetlana V. Kamzolova

    2018-01-01

    Full Text Available Isocitric acid exists in the form of four stereoisomers, of which only the threo-Ds-form (ICA is a natural active compound, an intermediate of Krebs cycle, and suitable for nutritional and pharmaceutical use. In this paper, we propose a method for ICA production from ethanol by yeast Yarrowia lipolytica. The effects of temperature, pH of the medium, and aeration on the growth of the producer Y. lipolytica VKM Y-2373 and synthesis of ICA were studied. An optimal fermentation regime, which ensures a good growth of the producer and directed synthesis of the target product, was determined. The producer is advised to carry out cultivation at 29°C and various pH of the medium and the oxygen concentration (pH 5 and pO2 20–25% (of saturation during the growth period and pH 6 and pO2 50–55% (of saturation during the acid formation on a nutrient medium containing an increased content of zinc (0.6 mg/L, iron (1.2 mg/L, and 30 mM itaconic acid (inhibitor of isocitrate lyase—the key enzyme of ICA metabolism should also be introduced into the nutrition medium. Such fermentation production mode provides 90.5 g/L ICA with process selectivity of 80%, mass yield (YICA of 0.77 g/g, and energy yield (ηICA of 0.278 g/g.

  20. Controlling the site density of multiwall carbon nanotubes via growth conditions

    Siegal, M. P.; Overmyer, D. L.; Kaatz, F. H.

    2004-06-01

    We present two complementary methods for controlling the site density of multiwall carbon nanotubes (CNTs) directly as a function of growth conditions from 1011to107CNTs/cm2. Several potential applications require significant spacing between individual CNTs. The first method shows that the site density varies with the heat of formation of the hydrocarbon gas used during CNT growth by thermal chemical vapor deposition. The second method demonstrates that the site density decreases with increasing residual stress of the metal catalyst/diffusion barrier layers. These methods are combined for wide-range control of CNT site density.

  1. In vitro maintenance, under slow-growth conditions, of oil palm germplasm obtained by embryo rescue

    Julcéia Camillo

    2015-05-01

    Full Text Available The objective of this work was to evaluate the in vitro maintenance of oil palm (Elaeis guineensis and E. oleifera accessions under slow-growth conditions. Plants produced by embryo rescue were subject to 1/2MS culture medium supplemented with the carbohydrates sucrose, mannitol, and sorbitol at 1, 2, and 3% under 20 and 25±2ºC. After 12 months, the temperature of 20°C reduced plant growth. Sucrose is the most appropriate carbohydrate for maintaining the quality of the plants, whereas mannitol and sorbitol result in a reduced plant survival.

  2. Seasonal carbon storage and growth in Mediterranean tree seedlings under different water conditions.

    Sanz-Pérez, Virginia; Castro-Díez, Pilar; Joffre, Richard

    2009-09-01

    In all Mediterranean-type ecosystems, evergreen and deciduous trees differing in wood anatomy, growth pattern and leaf habit coexist, suggesting distinct adaptative responses to environmental constraints. This study examined the effects of summer water stress on carbon (C) storage and growth in seedlings of three coexisting Mediterranean trees that differed in phenology and wood anatomy characteristics: Quercus ilex subsp. ballota (Desf.) Samp., Quercus faginea Lam. and Pinus halepensis L. Seedlings were subjected to two levels of watering during two consecutive summers and achieved a minimum of -0.5 and -2.5 MPa of predawn water potential in the control and water stress treatment, respectively. Both Quercus species concentrated their growth in the early growing season, demanding higher C in early spring but replenishing C-stores in autumn. These species allocated more biomass to roots, having larger belowground starch and lipid reserves. Quercus species differed in seasonal storage dynamics from P. halepensis. This species allocated most of its C to aboveground growth, which occurred gradually during the growing season, leading to fewer C-reserves. Soluble sugar and starch concentrations sharply declined in August in P. halepensis, probably because reserves support respiration demands as this species closed stomata earlier under water stress. Drought reduced growth of the three species, mainly in Q. faginea and P. halepensis, but not C-reserves, suggesting that growth under water stress conditions is not limited by C-availability.

  3. Growth, Toxin Production and Allelopathic Effects of Pseudo-nitzschia multiseries under Iron-Enriched Conditions

    Bruna Fernanda Sobrinho

    2017-10-01

    Full Text Available In order to assess the effects of Fe-enrichment on the growth and domoic acid (DA production of the toxigenic diatom Pseudo-nitzschia multiseries, static cultures that received the addition of different iron (Fe concentrations were maintained for 30 days. Intra- and extracellular DA concentrations were evaluated over time, and growth and chain-formation were compared to those of non-toxic diatoms, Bacillaria sp. Growth rates of P. multiseries (μ = 0.45–0.73 d−1 were similar among cultures containing different Fe concentrations. Likewise, the similar incidence and length of P. multiseries stepped cell chains (usually 2–4; up to 8-cell long among the treatments reinforces that the cultures were not growth-inhibited under any condition tested, suggesting an efficient Fe acquisition mechanism. Moreover, DA concentrations were significantly higher under the highest Fe concentration, indicating that Fe is required for toxin synthesis. Bacillaria sp. reached comparable growth rates under the same Fe concentrations, except when the dissolved cell contents from a P. multiseries culture was added. The 50–70% reduction in cell density and 70–90% decrease in total chlorophyll-a content of Bacillaria sp. at early stationary growth phase indicates, for the first time, an allelopathic effect of undetermined compounds released by Pseudo-nitzschia to another diatom species.

  4. Taguchi Experimental Design for Optimization of Recombinant Human Growth Hormone Production in CHO Cell Lines and Comparing its Biological Activity with Prokaryotic Growth Hormone.

    Aghili, Zahra Sadat; Zarkesh-Esfahani, Sayyed Hamid

    2018-02-01

    Growth hormone deficiency results in growth retardation in children and the GH deficiency syndrome in adults and they need to receive recombinant-GH in order to rectify the GH deficiency symptoms. Mammalian cells have become the favorite system for production of recombinant proteins for clinical application compared to prokaryotic systems because of their capability for appropriate protein folding, assembly, post-translational modification and proper signal. However, production level in mammalian cells is generally low compared to prokaryotic hosts. Taguchi has established orthogonal arrays to describe a large number of experimental situations mainly to reduce experimental errors and to enhance the efficiency and reproducibility of laboratory experiments.In the present study, rhGH was produced in CHO cells and production of rhGH was assessed using Dot blotting, western blotting and Elisa assay. For optimization of rhGH production in CHO cells using Taguchi method An M16 orthogonal experimental design was used to investigate four different culture components. The biological activity of rhGH was assessed using LHRE-TK-Luciferase reporter gene system in HEK-293 and compared to the biological activity of prokaryotic rhGH.A maximal productivity of rhGH was reached in the conditions of 1%DMSO, 1%glycerol, 25 µM ZnSO 4 and 0 mM NaBu. Our findings indicate that control of culture conditions such as the addition of chemical components helps to develop an efficient large-scale and industrial process for the production of rhGH in CHO cells. Results of bioassay indicated that rhGH produced by CHO cells is able to induce GH-mediated intracellular cell signaling and showed higher bioactivity when compared to prokaryotic GH at the same concentrations. © Georg Thieme Verlag KG Stuttgart · New York.

  5. Optimal control of nutrition restricted dynamics model of Microalgae biomass growth model

    Ratianingsih, R.; Azim; Nacong, N.; Resnawati; Mardlijah; Widodo, B.

    2017-12-01

    The biomass of the microalgae is very potential to be proposed as an alternative renewable energy resources because it could be extracted into lipid. Afterward, the lipid could be processed to get the biodiesel or bioethanol. The extraction of the biomass on lipid synthesis process is very important to be studied because the process just gives some amount of lipid. A mathematical model of restricted microalgae biomass growth just gives 1/3 proportion of lipid with respect to the biomass in the synthesis process. An optimal control is designed to raise the ratio between the number of lipid formation and the microalgae biomass to be used in synthesis process. The minimum/ Pontryagin maximum principle is used to get the optimal lipid production. The simulation shows that the optimal lipid formation could be reach by simultaneously controlling the carbon dioxide, in the respiration and photosynthesis the process, and intake nutrition rates of liquid waste and urea substrate. The production of controlled microalgae lipid could be increase 6.5 times comparing to the uncontrolled one.

  6. Enzymatic scavenging of oxygen dissolved in water: Application of response surface methodology in optimization of conditions

    Karimi Afzal

    2012-01-01

    Full Text Available In this work, removal of dissolved oxygen in water through reduction by glucose, which was catalyzed by glucose oxidase – catalase enzyme, was studied. Central composite design (CCD technique was applied to achieve optimum conditions for dissolved oxygen scavenging. Linear, square and interactions between effective parameters were obtained to develop a second order polynomial equation. The adequacy of the obtained model was evaluated by the residual plots, probability-value, coefficient of determination, and Fisher’s variance ratio test. Optimum conditions for activity of two enzymes in water deoxygenation were obtained as follows: pH=5.6, T=40°C, initial substrate concentration [S] = 65.5 mmol/L and glucose oxidase activity [E] = 252 U/Lat excess amount of catalase. The deoxygenation process during 30 seconds, in the optimal conditions, was predicted 98.2%. Practical deoxygenation in the predicted conditions was achieved to be 95.20% which was close to the model prediction.

  7. Optimal fetal growth for the Caucasian singleton and assessment of appropriateness of fetal growth: an analysis of a total population perinatal database

    Lawrence David M

    2005-05-01

    Full Text Available Abstract Background The appropriateness of an individual's intra uterine growth is now considered an important determinant of both short and long term outcomes, yet currently used measures have several shortcomings. This study demonstrates a method of assessing appropriateness of intrauterine growth based on the estimation of each individual's optimal newborn dimensions from routinely available perinatal data. Appropriateness of growth can then be inferred from the ratio of the value of the observed dimension to that of the optimal dimension. Methods Fractional polynomial regression models including terms for non-pathological determinants of fetal size (gestational duration, fetal gender and maternal height, age and parity were used to predict birth weight, birth length and head circumference from a population without any major risk factors for sub-optimal intra-uterine growth. This population was selected from a total population of all singleton, Caucasian births in Western Australia 1998–2002. Births were excluded if the pregnancy was exposed to factors known to influence fetal growth pathologically. The values predicted by these models were treated as the optimal values, given infant gender, gestational age, maternal height, parity, and age. Results The selected sample (N = 62,746 comprised 60.5% of the total Caucasian singleton birth cohort. Equations are presented that predict optimal birth weight, birth length and head circumference given gestational duration, fetal gender, maternal height, age and parity. The best fitting models explained 40.5% of variance for birth weight, 32.2% for birth length, and 25.2% for head circumference at birth. Conclusion Proportion of optimal birth weight (length or head circumference provides a method of assessing appropriateness of intrauterine growth that is less dependent on the health of the reference population or the quality of their morphometric data than is percentile position on a birth weight

  8. Condition monitoring and thermo economic optimization of operation for a hybrid plant using artificial neural networks

    Assadi, Mohsen; Fast, Magnus (Lund University, Dept. of Energy Sciences, Lund (Sweden))

    2008-05-15

    The project aim is to model the hybrid plant at Vaesthamnsverket in Helsingborg using artificial neural networks (ANN) and integrating the ANN models, for online condition monitoring and thermo economic optimization, on site. The definition of a hybrid plant is that it uses more than one fuel, in this case a natural gas fuelled gas turbine with heat recovery steam generator (HRSG) and a biomass fuelled steam boiler with steam turbine. The thermo economic optimization takes into account current electricity prices, taxes, fuel prices etc. and calculates the current production cost along with the 'predicted' production cost. The tool also has a built in feature of predicting when a compressor wash is economically beneficial. The user interface is developed together with co-workers at Vaesthamnsverket to ensure its usefulness. The user interface includes functions for warnings and alarms when possible deviations in operation occur and also includes a feature for plotting parameter trends (both measured and predicted values) in selected time intervals. The target group is the plant owners and the original equipment manufacturers (OEM). The power plant owners want to acquire a product for condition monitoring and thermo economic optimization of e.g. maintenance. The OEMs main interest lies in investigating the possibilities of delivering ANN models, for condition monitoring, along with their new gas turbines. The project has been carried out at Lund University, Department of Energy Sciences, with support from Vaesthamnsverket AB and Siemens Industrial Turbomachinery AB. Vaesthamnsverket has contributed with operational data from the plant as well as support in plant related questions. They have also been involved in the implementation of the ANN models in their computer system and the development of the user interface. Siemens have contributed with expert knowledge about their SGT800 gas turbine. The implementation of the ANN models, and the accompanying user

  9. 3-D simulations to investigate initial condition effects on the growth of Rayleigh-Taylor mixing

    Andrews, Malcolm J [Los Alamos National Laboratory

    2008-01-01

    The effect of initial conditions on the growth rate of turbulent Rayleigh-Taylor (RT) mixing has been studied using carefully formulated numerical simulations. An integrated large-eddy simulation (ILES) that uses a finite-volume technique was employed to solve the three-dimensional incompressible Euler equations with numerical dissipation. The initial conditions were chosen to test the dependence of the RT growth parameters ({alpha}{sub b}, {alpha}{sub s}) on variations in (a) the spectral bandwidth, (b) the spectral shape, and (c) discrete banded spectra. Our findings support the notion that the overall growth of the RT mixing is strongly dependent on initial conditions. Variation in spectral shapes and bandwidths are found to have a complex effect of the late time development of the RT mixing layer, and raise the question of whether we can design RT transition and turbulence based on our choice of initial conditions. In addition, our results provide a useful database for the initialization and development of closures describing RT transition and turbulence.

  10. Effect of Salicylic Acid on the Growth and Physiological Characteristics of Maize under Stress Conditions

    Manzoor, K.; Ilyas, N.; Batool, N.; Arshad, M.; Ahmad, B.

    2015-01-01

    Salicylic acid (SA) is a naturally occurring signaling molecule and growth regulator that enhances plant growth particularly in stress conditions. The present study was planned to evaluate the effects of different levels of SA on maize growth under drought and salt stress conditions. An experiment was conducted to test the morphological, physiological and biochemical changes in two cultivar of maize D-1184 and TG-8250. Varying levels of salicylic acid, i.e. 5mM, 10mM and 15mM were applied through foliar method. Exogenous applications of salicylic acid were done after 20 days of germination of the maize plants. Salicylic acid significantly affects root and shoot dry matter under drought and salt stress. Foliar application of SA significantly increased proline concentration (11 percentage and 12 percentage), amino acid accumulation (25 percentage and 18 percentage), relative water (17 percentage and 14 percentage) and Chlorophyll content. Overall, it can be concluded that SA at lower concentration is effective to minimize the effect of stress conditions. Maize cultivar TG-8250 showed better tolerance under drought and salt stress condition as compared to D-1184 cultivar. (author)

  11. Effect of Water Deficit Stress on Peach Growth under Commercial Orchard Management Conditions

    M. Rahmati

    2015-06-01

    Full Text Available In order to study the sensitivity of vegetative growth to water deficit stress of a late-maturing peach (Prunus persica L. cv. Elberta under orchard conditions, an experiment was conducted as randomized complete-block design with three treatments and four repetitions in Shahdiran commercial orchard in Mashhad during 2011. Three irrigation treatments including 360 (low stress, 180 (moderate stress and 90 (severe stress m3ha-1week-1 using a drip irrigation system (minimum stem water potential near harvest: -1.2, -1.5 and -1.7 MPa, respectively from the mid-pit hardening stage (12th of June until harvest (23rd of Sep. applied. Predawn, stem and leaf water potentials, leaf photosynthesis, transpiration, stomatal conductance and leaf temperature, the number of new shoots on fruit bearing shoots and vegetative shoots lengths during growing season as well as leaf area at harvest were measured. The results showed that water deficit stress had negative effects on peach tree water status, thereby resulting in decreased leaf gas exchange and tree vegetative growth. As significant decreased assimilate production of tree was resulted from both decreased leaf assimilation rate (until about 23 % and 50 %, respectively under moderate and severe stress conditions compared to low stress conditions and decreased leaf area of tree (until about 57% and 79%, respectively under moderate and severe stress conditions compared to low stress conditions at harvest. The significant positive correlation between leaf water potential and vegetative growth of peach revealed that shoot growth would decrease by 30% and 50% of maximum at leaf water potential of –1.56 and –2.30 MPa, respectively.

  12. Ventilatory function assessment in safety pharmacology: Optimization of rodent studies using normocapnic or hypercapnic conditions

    Goineau, Sonia; Rompion, Sonia; Guillaume, Philippe; Picard, Sandra

    2010-01-01

    Although the whole body plethysmography for unrestrained animals is the most widely used method to assess the respiratory risk of new drugs in safety pharmacology, non-appropriate experimental conditions may mask deleterious side effects of some substances. If stimulant or bronchodilatory effects can be easily evidenced in rodents under standard experimental conditions, i.e. normal air breathing and diurnal phase, drug-induced respiratory depression remains more difficult to detect. This study was aimed at comparing the responsiveness of Wistar rats, Duncan Hartley guinea-pigs or BALB/c mice to the respiratory properties of theophylline (50 or 100 mg/kg p.o.) or morphine (30 mg/kg i.p.) under varying conditions (100% air versus 5% CO 2 -enriched air, light versus dark day phase), in order to select the most appropriate experimental conditions to each species for safety airway investigations. Our results showed that under normocapnia the ventilatory depressant effects of morphine can be easily evidenced in mice, slightly observed in guinea-pigs and not detected in rats in any day phase. Slight hypercapnic conditions enhanced the responsiveness of rats to morphine but not that of guinea-pigs and importantly they did not blunt the airway responsiveness of rats to the stimulation and bronchodilation evoked by theophylline, the most widely used reference agent in safety pharmacology studies. In conclusion, hypercapnic conditions associated with the non-invasive whole body plethysmography should be considered for optimizing the assessment of both the ventilatory depressant potential of morphine-like substances or the respiratory stimulant effects of new drugs in the rat, the most extensively used species in rodent safety and toxicological investigations.

  13. Optimization of structural and growth parameters of metamorphic InGaAs photovoltaic converters grown by MOCVD

    Rybalchenko, D. V.; Mintairov, S. A.; Salii, R. A.; Shvarts, M. Z.; Timoshina, N. Kh.; Kalyuzhnyy, N. A., E-mail: nickk@mail.ioffe.ru [Russian Academy of Sciences, Ioffe Physical–Technical Institute (Russian Federation)

    2017-01-15

    Metamorphic Ga{sub 0.76}In{sub 0.24}As heterostructures for photovoltaic converters are grown by the MOCVD (metal–organic chemical vapor deposition) technique. It is found that, due to the valence-band offset at the p-In{sub 0.24}Al{sub 0.76}As/p-In{sub 0.24}Ga{sub 0.76}As (wide-gap window/emitter) heterointerface, a potential barrier for holes arises as a result of a low carrier concentration in the wide-gap material. The use of an InAlGaAs solid solution with an Al content lower than 40% makes it possible to raise the hole concentration in the widegap window up ~9 × 10{sup 18} cm{sup –3} and completely remove the potential barrier, thereby reducing the series resistance of the device. The parameters of an GaInAs metamorphic buffer layer with a stepwise In content profile are calculated and its epitaxial growth conditions are optimized, which improves carrier collection from the n-GaInAs base region and provides a quantum efficiency of 83% at a wavelength of 1064 nm. Optimization of the metamorphic heterostructure of the photovoltaic converter results in that its conversion efficiency for laser light with a wavelength of 1064 nm is 38.5%.

  14. Increasing costs due to ocean acidification drives phytoplankton to be more heavily calcified: optimal growth strategy of coccolithophores.

    Takahiro Irie

    Full Text Available Ocean acidification is potentially one of the greatest threats to marine ecosystems and global carbon cycling. Amongst calcifying organisms, coccolithophores have received special attention because their calcite precipitation plays a significant role in alkalinity flux to the deep ocean (i.e., inorganic carbon pump. Currently, empirical effort is devoted to evaluating the plastic responses to acidification, but evolutionary considerations are missing from this approach. We thus constructed an optimality model to evaluate the evolutionary response of coccolithophorid life history, assuming that their exoskeleton (coccolith serves to reduce the instantaneous mortality rates. Our model predicted that natural selection favors constructing more heavily calcified exoskeleton in response to increased acidification-driven costs. This counter-intuitive response occurs because the fitness benefit of choosing a better-defended, slower growth strategy in more acidic conditions, outweighs that of accelerating the cell cycle, as this occurs by producing less calcified exoskeleton. Contrary to the widely held belief, the evolutionarily optimized population can precipitate larger amounts of CaCO(3 during the bloom in more acidified seawater, depending on parameter values. These findings suggest that ocean acidification may enhance the calcification rates of marine organisms as an adaptive response, possibly accompanied by higher carbon fixation ability. Our theory also provides a compelling explanation for the multispecific fossil time-series record from ∼200 years ago to present, in which mean coccolith size has increased along with rising atmospheric CO(2 concentration.

  15. Effect of Different Growth Conditions on Certain Biochemical Parameters of Different Cyanobacterial Strains

    Hammouda, O. E.

    2012-01-01

    Full Text Available Aims: Variation in the traditional growth medium conditions to enhance the production of lipids, carbohydrates, protein and the free amino acids content of three cyanobacterial species. Methodology and Results: Three species of cyanobacteria (Anabaena laxa, Anabaena fertilissima and Nostoc muscorum were collected from the culture collection of Soils, Water and Environment Research Institute, Agriculture Research Center, Giza, Egypt, to investigate their biochemical composition under different growth conditions, using BG110 (nitrogen free as growth medium. These conditions were represented by control medium, static glucose medium with (1%, w/v, aerated medium (aerated by bubbling technique depending on CO2 normally existed in air with a concentration of 0.03%, molasses medium (0.7%, v/v and aerated medium enriched with glucose (1%, w/v. Lipid content, total carbohydrates, soluble proteins and free amino acids were determined at the previous conditions. Glucose at 0.7% (w/v was the most favorable for lipid production in A. laxa, where it exhibited the highest lipid content (427 μg/g fresh wt.. Increasing molasses concentration up to 0.7% (v/v produced an increase in lipid contents of the tested cyanobacterial strains. The highest lipid content of both N. muscorum (366.2 μg/g fresh wt. and A. laxa (357.4 μg/g fresh wt. were recorded at molasses concentrations of 0.1 and 0.7% (v/v, respectively. A. laxa expressed high significant values for both proteins (31.6 μg/mL and free amino acids (40.5 mg/g dry wt. after 6 days of incubation period under aerated enriched glucose condition (1%, w/v. Also, at the same growth conditions, A. fertilissima exhibited high significant values for carbohydrates at 4th day (876.8 mg/g dry wt.. Conclusion, significance and impact of study: Aerated enriched glucose medium (1%, w/v was the best growth medium condition used in the present study.

  16. In vitro conservation of Piper aduncum and Piper hispidinervum under slow-growth conditions

    Tatiane Loureiro da Silva

    2011-04-01

    Full Text Available The objective of this work was to evaluate in vitro storage of Piper aduncum and P. hispidinervum under slow-growth conditions. Shoots were stored at low temperatures (10, 20 and 25°C, and the culture medium was supplemented with osmotic agents (sucrose and mannitol - at 1, 2 and 3% and abiscisic acid - ABA (0, 0.5, 1.0, 2.0 and 3.0 mg L-1. After six-months of storage, shoots were evaluated for survival and regrowth. Low temperature at 20ºC was effective for the in vitro conservation of P. aduncum and P. hispidinervum shoots. In vitro cultures maintained at 20ºC on MS medium showed 100% survival with slow-growth shoots. The presence of mannitol or ABA, in the culture medium, negatively affected shoot growth, which is evidenced by the low rate of recovered shoots.

  17. A necessary condition for dispersal driven growth of populations with discrete patch dynamics.

    Guiver, Chris; Packman, David; Townley, Stuart

    2017-07-07

    We revisit the question of when can dispersal-induced coupling between discrete sink populations cause overall population growth? Such a phenomenon is called dispersal driven growth and provides a simple explanation of how dispersal can allow populations to persist across discrete, spatially heterogeneous, environments even when individual patches are adverse or unfavourable. For two classes of mathematical models, one linear and one non-linear, we provide necessary conditions for dispersal driven growth in terms of the non-existence of a common linear Lyapunov function, which we describe. Our approach draws heavily upon the underlying positive dynamical systems structure. Our results apply to both discrete- and continuous-time models. The theory is illustrated with examples and both biological and mathematical conclusions are drawn. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

  18. Uropathogenic Escherichia coli Express Type 1 Fimbriae Only in Surface Adherent Populations Under Physiological Growth Conditions

    Stærk, Kristian; Kolmos, Hans Jørn; Khandige, Surabhi

    2016-01-01

    were correlated with the ability to adhere to and invade cultured human bladder cells. RESULTS:  Although inactive during planktonic growth in urine, T1F expression occurs when UPEC settles on and infects bladder epithelial cells or colonizes catheters. As a result, UPEC in these sessile populations...... with increased expression during surface growth adaptation and infection of uroepithelial cells. This leads to separation of UPEC into low-expression planktonic populations and high-expression sessile populations....... enhances bladder cell adhesion and invasion potential. Only T1F-negative UPEC are subsequently released to the urine, thus limiting T1F expression to surface-associated UPEC alone. CONCLUSION:  Our results demonstrate that T1F expression is strictly regulated under physiological growth conditions...

  19. Growth and Survival of Some Probiotic Strains in Simulated Ice Cream Conditions

    Homayouni, A.; Ehsani, M. R.; Azizi, A.; Razavi, S. H.; Yarmand, M. S.

    A Completely Randomized Design (CRD) experiment was applied in triplicates to evaluate the survival of four probiotic strains in simulated ice cream conditions. The growth and survival rate of these probiotic strains (Lactobacillus acidophilus, Lactobacillus casei, Bifidobacterium bifidum and Bifidobacterium longum) in varying amount of sucrose (10, 15, 20 and 25%), oxygen scavenging components (0.05% L-cysteine and 0.05% L-ascorbate) and temperatures (4 and -20°C) during different periods of time (1, 2 and 3 months) were evaluated in MRS-broth medium. Optical density at 580 nm was used to measure growth. Lactobacilli strains proved to be highly resistant in comparison with Biffidobacteria strains. The viable cell number of Lactobacillus casei in different sucrose concentrations, different oxidoreduction potentials and refrigeration temperature was 1x1010, 2x108 and 5x107 cfu mL-1, respectively. Growth and survival rate of Lactobacillus casei showed to be the highest.

  20. THE EMPLOYMENT – PRODUCTIVITY – SALARY RELATION, A CONDITION FOR ACHIEVING LONG - TERM ECONOMIC GROWTH

    Mihai CHIRILA

    2005-01-01

    Full Text Available The employment-productivity-salary correlation is essential towards setting up conditions for economic growth andlasting social stability. An influence exists from technological changes, current stage of economic development,peculiarities of labour offer, employers – trade-unions interaction, etc. The analysis covers long-term and short-termcycles. In keeping with specificity of development stages, national economy witnesses an interval of productivitygrowth facilitating maximized employment and a rise in salary too. A lower growth rate indicates difficulties inassimilating new technologies; a higher growth rate generates instability in employing labour. Thus, the exercise ofstrong pressure is shown to exist on economic and technological structures. Likewise, this is what happens whenproductivity goes ahead of the separate analyses of the correlations between employment and productivity, on theone hand, and productivity and salary, on the other.

  1. Feeding behaviour and growth of the Peruvian scallop (Argopecten purpuratus) under daily cyclic hypoxia conditions

    Aguirre-Velarde, Arturo; Jean, Fred; Thouzeau, Gérard; Flye-Sainte-Marie, Jonathan

    2018-01-01

    As a secondary consequence of the high productivity of the upwelling system, organisms inhabiting Peruvian coastal bays are frequently exposed to hypoxic conditions. The aim of the present paper was to investigate the effects of daily-cyclic-severe hypoxia on energetics of a species presenting little escape ability when facing hypoxia. For this purpose, juvenile Peruvian scallops (Argopecten purpuratus) were exposed to four experimental conditions: fed and starved, combined or not to nightly severe hypoxia (5% oxygen saturation) for ≈ 12 h over a 21-day experiment. In both fed conditions, clearance rate was measured by the mean of an open-flow system. Our results indicate that the Peruvian scallop is able to maintain an active filtration even at low oxygen saturation, at least during expositions up to 12 h. During the first phase of exposure to hypoxia, clearance rate decreased abruptly when oxygen saturation dropped below 10%, but rapidly recovered to values close to those found under normoxia. As a consequence of this ability to feed during hypoxia, no difference in soft tissue dry weight (digestive gland not included) was observed at the end of the experimental period between oxic conditions among fed scallops. However, shell growth was negatively affected by hypoxic condition. Starved individuals exhibited similar weight loss between hypoxic and normoxic conditions indicating no or little effect of oxic condition on maintenance costs. Considering the observed responses for feeding, growth and maintenance, we can hypothesize that this species presents metabolic/bioenergetic efficient adaptations to deal with hypoxic conditions that are recurrent in Peruvian coastal bays. We hypothesize that the small observed effects might be modelled in the context of the Dynamic Energy Budget theory as a restriction of reserve mobilization under hypoxic conditions.

  2. Nutritional modulation of IGF-1 in relation to growth and body condition in Sceloporus lizards.

    Duncan, Christine A; Jetzt, Amanda E; Cohick, Wendie S; John-Alder, Henry B

    2015-05-15

    Nutrition and energy balance are important regulators of growth and the growth hormone/insulin-like growth factor (GH/IGF) axis. However, our understanding of these functions does not extend uniformly to all classes of vertebrates and is mainly limited to controlled laboratory conditions. Lizards can be useful models to improve our understanding of the nutritional regulation of the GH/IGF-1 axis because many species are relatively easy to observe and manipulate both in the laboratory and in the field. In the present study, the effects of variation in food intake on growth, body condition, and hepatic IGF-1 mRNA levels were measured in (1) juveniles of Sceloporus jarrovii maintained on a full or 1/3 ration and (2) hatchlings of Sceloporus undulatus subjected to full or zero ration with or without re-feeding. These parameters plus plasma IGF-1 were measured in a third experiment using adults of S. undulatus subjected to full or zero ration with or without re-feeding. In all experiments, plasma corticosterone was measured as an anticipated indicator of nutritional stress. In S. jarrovii, growth and body condition were reduced but lizards remained in positive energy balance on 1/3 ration, and hepatic IGF-1 mRNA and plasma corticosterone were not affected in comparison to full ration. In S. undulatus, growth, body condition, hepatic IGF-1 mRNA, and plasma IGF-1 were all reduced by zero ration and restored by refeeding. Plasma corticosterone was increased in response to zero ration and restored by full ration in hatchlings but not adults of S. undulatus. These data indicate that lizards conform to the broader vertebrate model in which severe food deprivation and negative energy balance is required to attenuate systemic IGF-1 expression. However, when animals remain in positive energy balance, reduced food intake does not appear to affect systemic IGF-1. Consistent with other studies on lizards, the corticosterone response to reduced food intake is an unreliable indicator

  3. Influence of bovine lactoferrin on the growth of selected probiotic bacteria under aerobic conditions.

    Chen, Po-Wen; Ku, Yu-We; Chu, Fang-Yi

    2014-10-01

    Bovine lactoferrin (bLf) is a natural glycoprotein, and it shows broad-spectrum antimicrobial activity. However, reports on the influences of bLf on probiotic bacteria have been mixed. We examined the effects of apo-bLf (between 0.25 and 128 mg/mL) on both aerobic and anaerobic cultures of probiotics. We found that bLf had similar effects on the growth of probiotics under aerobic or anaerobic conditions, and that it actively and significantly (at concentrations of >0.25 mg/mL) retarded the growth rate of Bifidobacterium bifidum (ATCC 29521), B. longum (ATCC 15707), B. lactis (BCRC 17394), B. infantis (ATCC 15697), Lactobacillus reuteri (ATCC 23272), L. rhamnosus (ATCC 53103), and L. coryniformis (ATCC 25602) in a dose-dependent manner. Otherwise, minimal inhibitory concentrations (MICs) were 128 or >128 mg/mL against B. bifidum, B. longum, B. lactis, L. reuteri, and L. rhamnosus (ATCC 53103). With regard to MICs, bLf showed at least four-fold lower inhibitory effect on probiotics than on pathogens. Intriguingly, bLf (>0.25 mg/mL) significantly enhanced the growth of Rhamnosus (ATCC 7469) and L. acidophilus (BCRC 14065) by approximately 40-200 %, during their late periods of growth. Supernatants produced from aerobic but not anaerobic cultures of L. acidophilus reduced the growth of Escherichia coli by about 20 %. Thus, bLf displayed a dose-dependent inhibitory effect on the growth of most probiotic strains under either aerobic or anaerobic conditions. An antibacterial supernatant prepared from the aerobic cultures may have significant practical use.

  4. Modification of growth conditions by mm-waves of wood-decaying mushrooms cultures

    Avagyan, I.A.

    2016-01-01

    Basidial macromycetes are not only value food, but can be used as source of such biological active compounds as the genistein, β -glucans, glioxal-oxidase et al. In this work we used different frequencies of extremely high frequency of electromagnetic irradiation (EHF EMI) with the aim of obtaining mushroom cultures with increased fermentative activity by the modulation of its growth conditions during growth on the peptone media. We investigated the influence of the non-thermal extremely high frequency electromagnetic waves in the interval of 45-53 GHz on β-glucosidase activities of two species of wood-decaying mushroom. In this study we examined the most popular edible wood-decaying mushroom Pleurotus ostreatus, which is wide-spread in the forests and commercial mushroom Lentinula edodes, under influence of such an abiotic factor as the extremely high frequency waves in the interval of 45 GHz - 53 GHz during 20 and 40 min on the 7th day of mycelial culture's growth. After the treatment of cultures we continued their growth and on the 3th day we examined the influence of these waves on fermentative activity of mycelial extracts. The some conditions of such treatment led to significant rising of β-glucosidase activities in the extracts of mycelial cultures

  5. Initial growth of Costus longebracteolatus and Costus spiralis ‘French Kiss’ under different light conditions

    Renata Bachin Mazzini-Guedes

    2016-12-01

    Full Text Available The Brazilian native Costus longebracteolatus and Costus spiralis ‘French Kiss’, in the family Costaceae, have been used as both cut flowers and cut foliage. It is known that Costus species grow better under partial shade, but studies on the influence of shading or light on plant growth, development, and flower production are still incipient. As this kind of information is essential on planning of planting, production, and agribusiness activities, the objective of this research was to evaluate the influence of different colored shade nets and light conditions on the initial growth of both C. longebracteolatus and C. spiralis ‘French Kiss’. Plants, obtained from cuttings of pseudostems, were cultivated under six light conditions, which comprised six treatments, along 270 days: red net with 50% shading, blue net with 50% shading, black net with 70% shading, black net with 50% shading, black net with 30% shading, and full sun. The initial growth of C. longebracteolatus (up to 270 days is more successful under the blue net with 50% shading, which promoted highest values of pseudostem length and dry matter of aerial part. For C. spiralis ‘French Kiss’ plants, both the red and blue nets with 50% shading implied best results and differed for the other treatments with greater pseudostem length. Plant exposure to full sun inhibited growth and development, and favored early leaf necrosis.

  6. Increased biomass yield of Lactococcus lactis during energetically limited growth and respiratory conditions

    Købmann, Brian Jensen; Blank, Lars Mathias; Solem, Christian

    2008-01-01

    (glucose/mannose-specific phosphotransferase system). Amino acid catabolism could be excluded as the source of the additional ATP. Since mutants without a functional H+-ATPase produced less ATP under sugar starvation and respiratory conditions, the additional ATP yield appears to come partly from energy......Lactococcus lactis is known to be capable of respiration under aerobic conditions in the presence of haemin. In the present study the effect of respiration on ATP production during growth on different sugars was examined. With glucose as the sole carbon source, respiratory conditions in L. lactis...... MG1363 resulted in only a minor increase, 21%, in biomass yield. Since ATP production through substrate-level phosphorylation was essentially identical with and without respiration, the increased biomass yield was a result of energy-saving under respiratory conditions estimated to be 0.4 mol of ATP...

  7. Optimization of Minimum Quantity Lubricant Conditions and Cutting Parameters in Hard Milling of AISI H13 Steel

    The-Vinh Do; Quang-Cherng Hsu

    2016-01-01

    As a successful solution applied to hard machining, the minimum quantity lubricant (MQL) has already been established as an alternative to flood coolant processing. The optimization of MQL parameters and cutting parameters under MQL condition are essential and pressing. The study was divided into two parts. In the first part of this study, the Taguchi method was applied to find the optimal values of MQL condition in the hard milling of AISI H13 with consideration of reduced surface roughness....

  8. Effect of Bacillus Species Rhizobacteria on Kabuli Chickpea Plants Growth under Pots and Field Conditions

    Ait Kaki, Asma; Benhassine, Sara; Milet, Asma; Kara Ali, Monira; Moula, Nassim; Kacem Chaouche, Nordine

    2018-01-01

    In the present research, some Bacillus strains were produced at the industrial scale in order to be tested on chickpea growth, under pots and field conditions. Bacteria reached high sporulation yields ranging from 0.8×109-2.5×109 and 8×109-10×109 spores mL-1 in flasks and 500 L bioreactor culture conditions, respectively. Under pots experiment, B. amyloliquefaciens (9SRTS) and B. amyloliquefaciens (CWBI) increased significantly the root mass (0.31 and 0.37 vs. 0.066 g, respectively) and reduc...

  9. Rate-Independent Processes with Linear Growth Energies and Time-Dependent Boundary Conditions

    Kružík, Martin; Zimmer, J.

    2012-01-01

    Roč. 5, č. 3 (2012), s. 591-604 ISSN 1937-1632 R&D Projects: GA AV ČR IAA100750802 Grant - others:GA ČR(CZ) GAP201/10/0357 Institutional research plan: CEZ:AV0Z10750506 Keywords : concentrations * oscillations * time - dependent boundary conditions * rate-independent evolution Subject RIV: BA - General Mathematics http://library.utia.cas.cz/separaty/2011/MTR/kruzik-rate-independent processes with linear growth energies and time - dependent boundary conditions.pdf

  10. Energy Performance and Optimal Control of Air-conditioned Buildings Integrated with Phase Change Materials

    Zhu, Na

    This thesis presents an overview of the previous research work on dynamic characteristics and energy performance of buildings due to the integration of PCMs. The research work on dynamic characteristics and energy performance of buildings using PCMs both with and without air-conditioning is reviewed. Since the particular interest in using PCMs for free cooling and peak load shifting, specific research efforts on both subjects are reviewed separately. A simplified physical dynamic model of building structures integrated with SSPCM (shaped-stabilized phase change material) is developed and validated in this study. The simplified physical model represents the wall by 3 resistances and 2 capacitances and the PCM layer by 4 resistances and 2 capacitances respectively while the key issue is the parameter identification of the model. This thesis also presents the studies on the thermodynamic characteristics of buildings enhanced by PCM and on the investigation of the impacts of PCM on the building cooling load and peak cooling demand at different climates and seasons as well as the optimal operation and control strategies to reduce the energy consumption and energy cost by reducing the air-conditioning energy consumption and peak load. An office building floor with typical variable air volume (VAV) air-conditioning system is used and simulated as the reference building in the comparison study. The envelopes of the studied building are further enhanced by integrating the PCM layers. The building system is tested in two selected cities of typical climates in China including Hong Kong and Beijing. The cold charge and discharge processes, the operation and control strategies of night ventilation and the air temperature set-point reset strategy for minimizing the energy consumption and electricity cost are studied. This thesis presents the simulation test platform, the test results on the cold storage and discharge processes, the air-conditioning energy consumption and demand

  11. Modelling growth of Penicillium expansum and Aspergillus niger at constant and fluctuating temperature conditions.

    Gougouli, Maria; Koutsoumanis, Konstantinos P

    2010-06-15

    The growth of Penicillium expansum and Aspergillus niger, isolated from yogurt production environment, was investigated on malt extract agar with pH=4.2 and a(w)=0.997, simulating yogurt, at isothermal conditions ranging from -1.3 to 35 degrees C and from 5 to 42.3 degrees C, respectively. The growth rate (mu) and (apparent) lag time (lambda) of the mycelium growth were modelled as a function of temperature using a Cardinal Model with Inflection (CMI). The results showed that the CMI can describe successfully the effect of temperature on fungal growth within the entire biokinetic range for both isolates. The estimated values of the CMI for mu were T(min)=-5.74 degrees C, T(max)=30.97 degrees C, T(opt)=22.08 degrees C and mu(opt)=0.221 mm/h for P. expansum and T(min)=10.13 degrees C, T(max)=43.13 degrees C, T(opt)=31.44 degrees C, and mu(opt)=0.840 mm/h for A. niger. The cardinal values for lambda were very close to the respective values for mu indicating similar temperature dependence of the growth rate and the lag time of the mycelium growth. The developed models were further validated under fluctuating temperature conditions using various dynamic temperature scenarios. The time-temperature conditions studied included single temperature shifts before or after the end of the lag time and continuous periodic temperature fluctuations. The prediction of growth at changing temperature was based on the assumption that after a temperature shift the growth rate is adopted instantaneously to the new temperature, while the lag time was predicted using a cumulative lag approach. The results showed that when the temperature shifts occurred before the end of the lag, they did not cause any significant additional lag and the observed total lag was very close to the cumulative lag predicted by the model. In experiments with temperature shifts after the end of the lag time, accurate predictions were obtained when the temperature profile included temperatures which were inside the

  12. Characteristics of bacterial and fungal growth in plastic bottled beverages under a consuming condition model.

    Watanabe, Maiko; Ohnishi, Takahiro; Araki, Emiko; Kanda, Takashi; Tomita, Atsuko; Ozawa, Kazuhiro; Goto, Keiichi; Sugiyama, Kanji; Konuma, Hirotaka; Hara-Kudo, Yukiko

    2014-01-01

    Microbial contamination in unfinished beverages can occur when drinking directly from the bottle. Various microorganisms, including foodborne pathogens, are able to grow in these beverages at room temperature or in a refrigerator. In this study, we elucidated the characteristics of microorganism growth in bottled beverages under consuming condition models. Furthermore, we provide insight into the safety of partially consumed bottled beverages with respect to food hygiene. We inoculated microorganisms, including foodborne pathogens, into various plastic bottled beverages and analysed the dynamic growth of microorganisms as well as bacterial toxin production in the beverages. Eight bottled beverage types were tested in this study, namely green tea, apple juice drink, tomato juice, carbonated drink, sport drink, coffee with milk, isotonic water and mineral water, and in these beverages several microorganism types were used: nine bacteria including three toxin producers, three yeasts, and five moulds. Following inoculation, the bottles were incubated at 35°C for 48 h for bacteria, 25°C for 48 h for yeasts, and 25°C for 28 days for moulds. During the incubation period, the number of bacteria and yeasts and visible changes in mould-growth were determined over time. Our results indicated that combinations of the beverage types and microorganism species correlated with the degree of growth. Regarding factors that affect the growth and toxin-productivity of microorganisms in beverages, it is speculated that the pH, static/shaking culture, temperature, additives, or ingredients, such as carbon dioxide or organic matter (especially of plant origin), may be important for microorganism growth in beverages. Our results suggest that various types of unfinished beverages have microorganism growth and can include food borne pathogens and bacterial toxins. Therefore, our results indicate that in terms of food hygiene it is necessary to consume beverages immediately after opening

  13. Growth Responses of Fish During Chronic Exposure of Metal Mixture under Laboratory Conditions

    Saima Naz and Muhammad Javed

    2013-07-01

    Full Text Available Growth responses of five fish species viz. Catla catla, Labeo rohita, Cirrhina mrigala, Ctenopharyngodon idella and Hypophthalmichthys molitrix were determined, separately, under chronic exposure of binary mixture of metals (Zn+Ni at sub-lethal concentrations (1/3rd of LC50 for 12 weeks. Randomized complete block design (RCBD was followed to conduct this research work. The groups (10 fish each of Catla catla, Labeo rohita, Cirrhina mrigala, Ctenopharyngodon idella and Hypophthalmichthys molitrix having almost similar weights were investigated for their growth responses and metals bioaccumulation patterns in their body organs during chronic exposure of Zn+Ni mixture. The bioaccumulation of metals in the fish body organs viz. gills, liver, kidney, fins, bones, muscle and skin were also determined before and after growth trails under the stress of metals mixture. The exposure of fish to sub-lethal concentrations of mixture caused significant impacts on the average wet weight increments of five fish species. Ctenopharyngodon idella and Labeo rohita attained significantly higher weights, followed by that of Hypophthalmichthys molitrix, Cirrhina mrigala and Catla catla. However, the growth of metals mixture exposed fish species was significantly lesser than that of control fish (un-stressed. Significantly variable condition factor values reflected the degree of fish well-beings that correlated directly with fish growth and metal exposure concentration. Any significant change in feed intake, due to stress, is reflected in terms of fish growth showing the impacts of metal mixture on fish growth were either additive or antagonist / synergistic. Accumulation of all the metals in fish body followed the general order: liver>kidney>gills> skin >muscle> fins >bones.

  14. Optimizing the physical conditioning of the NASCAR sprint cup pit crew athlete.

    Ferguson, David P; Davis, Adam M; Lightfoot, J Timothy

    2015-03-01

    Stock car racing is the largest spectator sport in the United States. As a result, National Association for Stock Car Automobile Racing (NASCAR) Sprint Cup teams have begun to invest in strength and conditioning programs for their pit crew athletes. However, there is limited knowledge regarding the physical characteristics of elite NASCAR pit crew athletes, how the NASCAR Sprint Cup season affects basic physiological parameters such as body composition, and what is the most appropriate physical training program that meets the needs of a pit crew athlete. We conducted 3 experiments involving Sprint Cup motorsport athletes to determine predictors of success at the elite level, seasonal physiological changes, and appropriate physical training programs. Our results showed that hamstring flexibility (p = 0.015) and the score on the 2-tire front run test (p = 0.012) were significant predictors of NASCAR Sprint Cup Pit Crew athlete performance. Additionally, during the off season, pit crew athletes lost lean body mass, which did not return until the middle of the season. Therefore, a strength and conditioning program was developed to optimize pit crew athlete performance throughout the season. Implementation of this strength and conditioning program in 1 NASCAR Sprint Cup team demonstrated that pit crew athletes were able to prevent lean body mass loss and have increased muscle power output from the start of the season to the end of the season.

  15. Optimization of ultrasonic emulsification conditions for the production of orange peel essential oil nanoemulsions.

    Hashtjin, Adel Mirmajidi; Abbasi, Soleiman

    2015-05-01

    The aim of the present study was to investigate the influence of emulsifying conditions on some physical and rheological properties of orange peel essential oil (OPEO) in water nanoemulsions. In this regard, using the response surface methodology, the influence of ultrasonication conditions including sonication amplitude (70-100 %), sonication time (90-150 s) and process temperature (5-45 °C) on the mean droplets diameter (Z-average value), polydispersity index (PDI), and viscosity of the OPEO nanoemulsions was evaluated. In addition, the flow behavior and stability of selected nanoemulsions was evaluated during storage (up to 3 months) at different temperatures (5, 25 and 45 °C). Based on the results of the optimization, the optimum conditions for producing OPEO nanoemulsions (Z-average value 18.16 nm) were determined as 94 % (sonication amplitude), 138 s (sonication time) and 37 °C (process temperature). Moreover, analysis of variance (ANOVA) showed high coefficients of determination values (R (2) > 0.95) for the response surface models of the energy input and Z-average. In addition, the flow behavior of produced nanoemulsions was Newtonian, and the effect of time and storage temperature as well as their interactions on the Z-average value was highly significant (P < 0.0001).

  16. Growth, photosynthetic pigments and production of essential oil of long-pepper under different light conditions.

    Lima, Vandimilli A; Pacheco, Fernanda V; Avelar, Rafaella P; Alvarenga, Ivan C A; Pinto, José Eduardo B P; Alvarenga, Amauri A DE

    2017-01-01

    Piper hispidinervum C. DC. is popularly known as long-pepper and it owns a commercial value due to the essential oil it produces. Long-pepper oil is rich in safrole and eugenoln components that have insecticidal, fungicidal and bactericidal activity. It has been establish that to medicinal plants light influences not only growth but also essential oil production. The growth, the content of photosynthetic pigments and the essential oil production of Piper hispidinervum at greenhouses with different light conditions was evaluated. The treatments were characterized by cultivation of plants for 180 days under different light conditions, produced by shading greenhouses with 50% and 30% of natural incident irradiance, two colored shading nets red (RN) and blue (BN) both blocking 50% of the incident radiation and one treatment at full-sun (0% of shade). The results showed that the treatments of 50% shade and RN and BN were the ones which stimulated the greater growth. Blue and red light also had the best production of photosynthetic pigments. Essential oil yielded more under full sun therefore this is the most indicated condition to produce seedlings for the chemical and pharmaceutical industry.

  17. Growth, photosynthetic pigments and production of essential oil of long-pepper under different light conditions

    VANDIMILLI A. LIMA

    Full Text Available ABSTRACT Piper hispidinervum C. DC. is popularly known as long-pepper and it owns a commercial value due to the essential oil it produces. Long-pepper oil is rich in safrole and eugenoln components that have insecticidal, fungicidal and bactericidal activity. It has been establish that to medicinal plants light influences not only growth but also essential oil production. The growth, the content of photosynthetic pigments and the essential oil production of Piper hispidinervum at greenhouses with different light conditions was evaluated. The treatments were characterized by cultivation of plants for 180 days under different light conditions, produced by shading greenhouses with 50% and 30% of natural incident irradiance, two colored shading nets red (RN and blue (BN both blocking 50% of the incident radiation and one treatment at full-sun (0% of shade. The results showed that the treatments of 50% shade and RN and BN were the ones which stimulated the greater growth. Blue and red light also had the best production of photosynthetic pigments. Essential oil yielded more under full sun therefore this is the most indicated condition to produce seedlings for the chemical and pharmaceutical industry.

  18. Arabidopsis Phosphatidic Acid Phosphohydrolases Are Essential for Growth under Nitrogen-Depleted Conditions

    Yushi Yoshitake

    2017-10-01

    Full Text Available The Arabidopsis homologs of mammalian lipin, PAH1 and PAH2, are cytosolic phosphatidic acid phosphohydrolases that are involved in phospholipid biosynthesis and are essential for growth under phosphate starvation. Here, pah1 pah2 double-knockout mutants were found to be hypersensitive to nitrogen (N starvation, whereas transgenic plants overexpressing PAH1 or PAH2 in the pah1 pah2 mutant background showed a similar growth phenotype as compared with wild type (WT under N starvation. The chlorophyll content of pah1 pah2 was significantly lower than that of WT, whereas the chlorophyll content and photosynthetic activity of the transgenic plants were significantly higher than those of WT under N-depleted conditions. Membrane glycerolipid composition of the pah1 pah2 mutants showed a significant decrease in the mole percent of chloroplast lipids to other phospholipids, whereas membrane lipid composition did not differ between transgenic plants and WT plants. Pulse-chase labeling experiments using plants grown under N-depleted conditions showed that, in pah1 pah2 plants, the labeling percent of chloroplast lipids such as phosphatidylglycerol and monogalactosyldiacylglycerol in the total glycerolipids was significantly lower than in WT. Moreover, N starvation-induced degradation of chloroplast structure was enhanced in pah1 pah2 mutants, and the membrane structure was recovered by complementation with PAH1. Thus, PAH is involved in maintaining chloroplast membrane structure and is required for growth under N-depleted conditions.

  19. A portable anaerobic microbioreactor reveals optimum growth conditions for the methanogen Methanosaeta concilii.

    Steinhaus, Benjamin; Garcia, Marcelo L; Shen, Amy Q; Angenent, Largus T

    2007-03-01

    Conventional studies of the optimum growth conditions for methanogens (methane-producing, obligate anaerobic archaea) are typically conducted with serum bottles or bioreactors. The use of microfluidics to culture methanogens allows direct microscopic observations of the time-integrated response of growth. Here, we developed a microbioreactor (microBR) with approximately 1-microl microchannels to study some optimum growth conditions for the methanogen Methanosaeta concilii. The microBR is contained in an anaerobic chamber specifically designed to place it directly onto an inverted light microscope stage while maintaining a N2-CO2 environment. The methanogen was cultured for months inside microchannels of different widths. Channel width was manipulated to create various fluid velocities, allowing the direct study of the behavior and responses of M. concilii to various shear stresses and revealing an optimum shear level of approximately 20 to 35 microPa. Gradients in a single microchannel were then used to find an optimum pH level of 7.6 and an optimum total NH4-N concentration of less than 1,100 mg/liter (<47 mg/liter as free NH3-N) for M. concilii under conditions of the previously determined ideal shear stress and pH and at a temperature of 35 degrees C.

  20. Initial growth of Bauhinia variegata trees under different colored shade nets and light conditions

    Renata Bachin Mazzini-Guedes

    2014-12-01

    Full Text Available Bauhinia variegata and B. variegata var. candida, commonly known as orchid trees, are small sized trees widely used for urban forestry and landscaping. Adult plants grow under full sun; in Brazil, however, seedlings are generally cultivated in commercial nurseries under natural half-shading. The objective of this study was to evaluate the influence of different colored shade nets and light conditions on the initial growth of B. variegata and B. variegata var. candida. The influence of six light conditions (red net with 50% shading; blue net with 50% shading; black net with 70% shading; black net with 50% shading; black net with 30% shading; and full sun on the initial growth of B. variegata and B. variegata var. candida were evaluated along 160 days, and growth relationships were calculated. Seedlings showed more efficiency on the use of photoassimilated compounds when grown under full sun. Such condition is the most appropriate for seedling production of B. variegata and B. variegata var. candida, contradicting what has been performed in practice.

  1. Application of Fourier transform near-infrared spectroscopy to optimization of green tea steaming process conditions.

    Ono, Daiki; Bamba, Takeshi; Oku, Yuichi; Yonetani, Tsutomu; Fukusaki, Eiichiro

    2011-09-01

    In this study, we constructed prediction models by metabolic fingerprinting of fresh green tea leaves using Fourier transform near-infrared (FT-NIR) spectroscopy and partial least squares (PLS) regression analysis to objectively optimize of the steaming process conditions in green tea manufacture. The steaming process is the most important step for manufacturing high quality green tea products. However, the parameter setting of the steamer is currently determined subjectively by the manufacturer. Therefore, a simple and robust system that can be used to objectively set the steaming process parameters is necessary. We focused on FT-NIR spectroscopy because of its simple operation, quick measurement, and low running costs. After removal of noise in the spectral data by principal component analysis (PCA), PLS regression analysis was performed using spectral information as independent variables, and the steaming parameters set by experienced manufacturers as dependent variables. The prediction models were successfully constructed with satisfactory accuracy. Moreover, the results of the demonstrated experiment suggested that the green tea steaming process parameters could be predicted on a larger manufacturing scale. This technique will contribute to improvement of the quality and productivity of green tea because it can objectively optimize the complicated green tea steaming process and will be suitable for practical use in green tea manufacture. Copyright © 2011 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

  2. Optimization of conditions for the extraction of phorbol esters from Jatropha oil

    Devappa, Rakshit K.; Makkar, H.P.S.; Becker, K. [Institute for Animal Production in the Tropics and Subtropics (480b), University of Hohenheim, 70593 Stuttgart (Germany)

    2010-08-15

    The production of Jatropha curcas seeds as a biodiesel feedstock is expected to reach 160 Mt by 2017. The present study aims at extracting phorbol esters (PEs) as a co-product from Jatropha oil before processing it to biodiesel. The conditions were optimized for extraction of PEs in organic solvents by using a magnetic stirrer and an Ultra turrax. The extent of reduction in PEs was >99.4% in methanol using any of the stirring tools. However, the extraction using Ultra turrax affected considerably the colour of the remaining oil. Therefore, further solvent:oil ratio, time and temperature were optimized using a magnetic stirrer to get PE rich fraction-I (48.4 mg PEs g{sup -1}) and virtually PE-free oil. PEs were 14 fold higher in this fraction than the control oil. PEs, extracted in methanol from the untreated Jatropha oil, at 1 mg L{sup -1} produced 100% mortality in snails (Physa fontinalis). The methanol extract from virtually PE-free oil when concentrated 20 and 25 time the untreated Jatropha oil (equivalent of 20 mg L{sup -1} and 25 mg L{sup -1} PEs in the control oil) was nontoxic to snails. PE rich fraction-I, obtained as a co-product, can be used in agricultural, medicinal and pharmaceutical applications and the remaining oil can be used for biodiesel preparation. The remaining oil will be friendly to the environment and workers. (author)

  3. On thermoeconomics of energy systems at variable load conditions: Integrated optimization of plant design and operation

    Piacentino, A.; Cardona, F.

    2007-01-01

    Thermoeconomics has been assuming a growing role among the disciplines oriented to the analysis of energy systems, its different methodologies allowing solution of problems in the fields of cost accounting, plant design optimisation and diagnostic of malfunctions. However, the thermoeconomic methodologies as such are particularly appropriate to analyse large industrial systems at steady or quasi-steady operation, but they can be hardly applied to small to medium scale units operating in unsteady conditions to cover a variable energy demand. In this paper, the fundamentals of thermoeconomics for systems operated at variable load are discussed, examining the cost formation process and, separately, the cost fractions related to capital depreciation (which require additional distinctions with respect to plants in steady operation) and to exergy consumption. The relevant effects of the efficiency penalty due to off design operation on the exergetic cost of internal flows are also examined. An original algorithm is proposed for the integrated optimization of plant design and operation based on an analytical solution by the Lagrange multipliers method and on a multi-objective decision function, expressed either in terms of net cash flow or primary energy saving. The method is suitable for application in complex energy systems, such as 'facilities of components of a same product' connected to external networks for power or heat distribution. For demonstrative purposes, the proposed thermoeconomically aided optimization is performed for a grid connected trigeneration system to be installed in a large hotel

  4. Safety constraints applied to an adaptive Bayesian condition-based maintenance optimization model

    Flage, Roger; Coit, David W.; Luxhøj, James T.; Aven, Terje

    2012-01-01

    A model is described that determines an optimal inspection and maintenance scheme for a deteriorating unit with a stochastic degradation process with independent and stationary increments and for which the parameters are uncertain. This model and resulting maintenance plans offers some distinct benefits compared to prior research because the uncertainty of the degradation process is accommodated by a Bayesian approach and two new safety constraints have been applied to the problem: (1) with a given subjective probability (degree of belief), the limiting relative frequency of one or more failures during a fixed time interval is bounded; or (2) the subjective probability of one or more failures during a fixed time interval is bounded. In the model, the parameter(s) of a condition-based inspection scheduling function and a preventive replacement threshold are jointly optimized upon each replacement and inspection such as to minimize the expected long run cost per unit of time, but also considering one of the specified safety constraints. A numerical example is included to illustrate the effect of imposing each of the two different safety constraints.

  5. Analysis of diet optimization models for enabling conditions for hypertrophic muscle enlargement in athletes

    L. Matijević

    2013-01-01

    Full Text Available In this study mathematical models were created and used in diet optimization for an athlete – recreational bodybuilder for pretournament period. The main aim was to determine weekly menus that can enable conditions for the hypertrophic muscle enlargement and to reduce the fat mass in a body. Each daily offer was planned to contain six to seven meals but with respect to several user’s personal demands. Optimal carbohydrates, fat and protein ratio in diet for enabling hypertrophy, recommended in literature, was found to be 43:30:27 and was chosen as the target in this research. Variables included in models were presented dishes and constraints, observed values of the offers; price, mass of consumed food, energy, water and content of different nutrients. The general idea was to create the models and to compare different programs in solving a problem. LINDO and MS Excel were recognized as widely spread and were chosen for model testing and examination. Both programs were suggested weekly menus that were acceptable to the user and were met all recommendations and demands. Weekly menus were analysed and compared. Sensitivity tests from both programs were used to detect possible critical points in the menu. Used programs produced slightly different results but still with very high correlation between proposed weekly intakes (R2=0.99856, p<0.05 so both can be successfully used in the pretournament period of bodybuilding and recommended for this complex task.

  6. Decision Optimization for Power Grid Operating Conditions with High- and Low-Voltage Parallel Loops

    Dong Yang

    2017-05-01

    Full Text Available With the development of higher-voltage power grids, the high- and low-voltage parallel loops are emerging, which lead to energy losses and even threaten the security and stability of power systems. The multi-infeed high-voltage direct current (HVDC configurations widely appearing in AC/DC interconnected power systems make this situation even worse. Aimed at energy saving and system security, a decision optimization method for power grid operating conditions with high- and low-voltage parallel loops is proposed in this paper. Firstly, considering hub substation distribution and power grid structure, parallel loop opening schemes are generated with GN (Girvan-Newman algorithms. Then, candidate opening schemes are preliminarily selected from all these generated schemes based on a filtering index. Finally, with the influence on power system security, stability and operation economy in consideration, an evaluation model for candidate opening schemes is founded based on analytic hierarchy process (AHP. And a fuzzy evaluation algorithm is used to find the optimal scheme. Simulation results of a New England 39-bus system and an actual power system validate the effectiveness and superiority of this proposed method.

  7. Optimal conditions for taking spectra of coffee beans plasma spectroscopy induced by laser (LIBS)

    Diaz Guerrero, A. M.; Flores Reyes; Ponce Cabrera, L. V.

    2016-01-01

    Coffee beans, arabica and robusta, from Mexico (Chiapas and Veracruz), Colombia, Kenya and Sumatra were analyzed by Laser-induced breakdown spectroscopy (LIBS). The time delay and pulse energy were varied in order to find the optimal conditions for taking spectra in coffee beans; finding that the increased visibility of the peaks and the lowest electronic background is observed with 1 s and 450 mJ. Spectra were taken in different regions of grain area to confirm its homogeneous composition. It was found that the intensity of the signal Ca is much higher than that of K in African coffee, lower in the coffee of America, and much lower in the coffee from Asia. (Author)

  8. Analysis and Optimal Condition of the Rear-Sound-Aided Control Source in Active Noise Control

    Karel Kreuter

    2011-01-01

    Full Text Available An active noise control scenario of simple ducts is considered. The previously suggested technique of using an single loudspeaker and its rear sound to cancel the upstream sound is further examined and compared to the bidirectional solution in order to give theoretical proof of its advantage. Firstly, a model with a new approach for taking damping effects into account is derived based on the electrical transmission line theory. By comparison with the old model, the new approach is validated, and occurring differences are discussed. Moreover, a numerical application with the consideration of damping is implemented for confirmation. The influence of the rear sound strength on the feedback-path system is investigated, and the optimal condition is determined. Finally, it is proven that the proposed source has an advantage of an extended phase lag and a time delay in the feedback-path system by both frequency-response analysis and numerical calculation of the time response.

  9. OPTIMIZATION OF PRETREATMENT CONDITIONS OF CARROTS TO MAXIMIZE JUICE RECOVERY BY RESPONSE SURFACE METHODOLOGY

    H. K. SHARMA

    2006-12-01

    Full Text Available Carrot juice was expressed in a hydraulic press using a wooden set up. Carrot samples pretreated at different designed combinations, using Central Composite Rotatable Design (CCRD, Response Surface Methodology (RSM, of pH, temperature and time were expressed and juice so obtained was characterized for various physico-chemical parameters which involved yield, TSS and water content, reducing sugars, total sugars and color (absorbance. The study indicated that carrots exposed to the different pretreatment conditions resulted in increased amount of yield than that of the control. The responses were optimized by numerical method and were found to be 78.23% yield, 0.93% color (abs, 3.41% reducing sugars, 5.53% total sugars, 6.69obrix, and 90.50% water content. All the derived mathematical models for the various responses were found to be fit significantly to predict the data.

  10. Optimal conditions for high current proton irradiations at the university of Wisconsin's ion beam laboratory

    Wetteland, C. J.; Field, K. G.; Gerczak, T. J.; Eiden, T. J.; Maier, B. R.; Albakri, O.; Sridharan, K.; Allen, T. R.

    2013-01-01

    The National Electrostatics Corporation's (NEC) Toroidal Volume Ion Source (TORVIS) source is known for exceptionally high proton currents with minimal service downtime as compared to traditional sputter sources. It has been possible to obtain over 150μA of proton current from the source, with over 70μA on the target stage. However, beam fluxes above ∼1×10 17 /m2-s may have many undesirable effects, especially for insulators. This may include high temperature gradients at the surface, sputtering, surface discharge, cracking or even disintegration of the sample. A series of experiments were conducted to examine the role of high current fluxes in a suite of ceramics and insulating materials. Results will show the optimal proton irradiation conditions and target mounting strategies needed to minimize unwanted macro-scale damage, while developing a procedure for conducting preliminary radiation experiments.

  11. An Exploratory Study on the Optimized Test Conditions of the Lock-in Thermography Technique

    Cho, Yong Jin

    2011-01-01

    This work is devoted to the technique application of lock-in infrared thermography in the shipbuilding and ocean engineering industry. For this purpose, an exploratory study to find the optimized test conditions is carried out by the design of experiments. It has been confirmed to be useful method that the phase contrast images were quantified by a reference image and weighted by defect hole size. Illuminated optical intensity of lower or medium strength give a good result for getting a phase contrast image. In order to get a good phase contrast image, lock-in frequency factors should be high in proportion to the illuminated optical intensity. The integration time of infrared camera should have been inversely proportional to the optical intensity. The other hand, the difference of specimen materials gave a slightly biased results not being discriminative reasoning

  12. [Orthogonal experiments for optimizing the formulation and preparation conditions of temozolomide solid lipid nanoparticles].

    Dou, Mingjin; Huang, Guihua; Xi, Yanwei; Zhang, Na

    2008-10-01

    TMZ-SLN were prepared by emulsification-low temperature solidification method with stearic acid. The formulation and the preparation conditions were optimized by orthogonal experiments using entrapment efficiency as the evaluation index. The morphology was detected by transmission electron microscope. The Zeta potentials and the particle size distribution were evaluated by Laser Doppler Anemometry. The entrapment efficiencies and the drug release characteristics in vitro were assessed. The result showed that TMZ-SLN were concinnous and spherical in shape. The mean diameter (d(av) ) was 65.0 +/- 6.2 nm and the Zeta potential was -37.2 mV. The average entrapment efficiency was 58.9% +/- 1.21 %. The drug release behavior in vitro conformed to Higuchi Equation. The formation of a new material phase was testified by analysis of differential scanning calorimetry.

  13. Decreasing diameter fluctuation of polymer optical fiber with optimized drawing conditions

    Çetinkaya, Onur; Wojcik, Grzegorz; Mergo, Pawel

    2018-05-01

    The diameter fluctuations of poly(methyl methacrylate) based polymer optical fibers, during drawing processes, have been comprehensively studied. In this study, several drawing parameters were selected for investigation; such as drawing tensions, preform diameters, preform feeding speeds, and argon flows. Varied drawing tensions were used to draw fibers, while other parameters were maintained at constant. At a later stage in the process, micro-structured polymer optical fibers were drawn under optimized drawing conditions. Fiber diameter deviations were reduced to 2.2%, when a 0.2 N drawing tension was employed during the drawing process. Higher drawing tensions led to higher diameter fluctuations. The Young’s modulus of fibers drawn with different tensions was also measured. Our results showed that fiber elasticity increased as drawing tensions decreased. The inhomogeneity of fibers was also determined by comparing the deviation of Young’s modulus.

  14. Optimization and Performance Study of Select Heating Ventilation and Air Conditioning Technologies for Commercial Buildings

    Kamal, Rajeev

    part load operation. The study highlighted the need for optimum system sizing for GEHP/HVAC systems to meet the building load to obtain better performance in buildings. The second part of this study focusses on using chilled water or ice as thermal energy storage for shifting the air conditioning load from peak to off-peak in a commercial building. Thermal energy storage can play a very important role in providing demand-side management for diversifying the utility demand from buildings. Model of a large commercial office building is developed with thermal storage for cooling for peak power shifting. Three variations of the model were developed and analyzed for their performance with 1) ice storage, 2) chilled water storage with mixed storage tank and 3) chilled water storage with stratified tank, using EnergyPlus 8.5 software developed by the US Department of Energy. Operation strategy with tactical control to incorporate peak power schedule was developed using energy management system (EMS). The modeled HVAC system was optimized for minimum cost with the optimal storage capacity and chiller size using JEPlus. Based on the simulation, an optimal storage capacity of 40-45 GJ was estimated for the large office building model along with 40% smaller chiller capacity resulting in higher chiller part-load performance. Additionally, the auxiliary system like pump and condenser were also optimized to smaller capacities and thus resulting in less power demand during operation. The overall annual saving potential was found in the range of 7-10% for cooling electricity use resulting in 10-17% reduction in costs to the consumer. A possible annual peak shifting of 25-78% was found from the simulation results after comparing with the reference models. Adopting TES in commercial buildings and achieving 25% peak shifting could result in a reduction in peak summer demand of 1398 MW in Tampa.

  15. Optimization of marine waste based-growth media for microbial lipase production using mixture design methodology.

    Sellami, Mohamed; Kedachi, Samiha; Frikha, Fakher; Miled, Nabil; Ben Rebah, Faouzi

    2013-01-01

    Lipase production by Staphylococcus xylosus and Rhizopus oryzae was investigated using a culture medium based on a mixture of synthetic medium and supernatants generated from tuna by-products and Ulva rigida biomass. The proportion of the three medium components was optimized using the simplex-centroid mixture design method (SCMD). Results indicated that the experimental data were in good agreement with predicted values, indicating that SCMD was a reliable method for determining the optimum mixture proportion of the growth medium. Maximal lipase activities of 12.5 and 23.5 IU/mL were obtained with a 50:50 (v:v) mixture of synthetic medium and tuna by-product supernatant for Staphylococcus xylosus and Rhizopus oryzae, respectively. The predicted responses from these mixture proportions were also validated experimentally.

  16. Optimal operating conditions of a transcritical endoreversible cycle using a low enthalpy heat source

    Rachedi, Malika; Feidt, Michel; Amirat, Madjid; Merzouk, Mustapha

    2016-01-01

    Highlights: • Thermodynamics analysis of a finite size heat engine driven by a finite heat source. • Mathematical modelling of a transcritical endoreversible organic Rankine cycle. • Parametric study of the optimum operating conditions of transcritical cycle. • Choice of appropriate parameters could lead to very promising efficiencies. - Abstract: In the context of thermodynamic analysis of finite dimensions systems, we studied the optimum operating conditions of an endoreversible thermal machine. In this study, we considered a transcritical cycle, considering external irreversibilities. The hot reservoir is a low enthalpy geothermal heat source; therefore, it is assumed to be finite, whereas the cold reservoir is assumed to be infinite. The power optimisation is investigated by searching the optimum effectiveness of the heat-exchanger at the hot side of the engine. The sum of the total effectiveness and the second law of thermodynamics are used as constraints for optimisation. The optimal temperatures of the working fluid and optimum performances are evaluated based on the most significant parameters of the system: (1) the ratio of heat capacity rate of the working fluid to the heat capacity rate of the coolant and (2) the ratio of the sink temperature to the temperature of the hot source. The parametric study of the cycle and its approximation by a trilateral cycle enabled us to determine the optimum value of the effectiveness of the heat exchangers and the optimal operating temperatures of the cycle considered. The efficiencies obtained are in the range of 15–25% and was found to exceed the efficiency expected by the Curzon and Ahlborn prevision; meanwhile, the Carnot efficiency remains at a high limit.

  17. Optimization of fermentation conditions for the production of curcumin by engineered Escherichia coli.

    Couto, Márcia R; Rodrigues, Joana L; Rodrigues, Lígia R

    2017-08-01

    Curcumin is a plant secondary metabolite with outstanding therapeutic effects. Therefore, there is a great interest in developing new strategies to produce this high-value compound in a cheaper and environmentally friendly way. Curcumin heterologous production in Escherichia coli using artificial biosynthetic pathways was previously demonstrated using synthetic biology approaches. However, the culturing conditions to produce this compound were not optimized and so far only a two-step fermentation process involving the exchange of culture medium allowed high concentrations of curcumin to be obtained, which limits its production at an industrial scale. In this study, the culturing conditions to produce curcumin were evaluated and optimized. In addition, it was concluded that E. coli BL21 allows higher concentrations of curcumin to be produced than E. coli K-12 strains. Different isopropyl β-d-thiogalactopyranoside concentrations, time of protein expression induction and substrate type and concentration were also evaluated. The highest curcumin production obtained was 959.3 µM (95.93% of per cent yield), which was 3.1-fold higher than the highest concentration previously reported. This concentration was obtained using a two-stage fermentation with lysogeny broth (LB) and M9. Moreover, terrific broth was also demonstrated to be a very interesting alternative medium to produce curcumin because it also led to high concentrations (817.7 µM). The use of this single fermentation medium represents an advantage at industrial scale and, although the final production is lower than that obtained with the LB-M9 combination, it leads to a significantly higher production of curcumin in the first 24 h of fermentation. This study allowed obtaining the highest concentrations of curcumin reported so far in a heterologous organism and is of interest for all of those working with the heterologous production of curcuminoids, other complex polyphenolic compounds or plant secondary

  18. Growth condition dependency is the major cause of non-responsiveness upon genetic perturbation.

    Saman Amini

    Full Text Available Investigating the role and interplay between individual proteins in biological processes is often performed by assessing the functional consequences of gene inactivation or removal. Depending on the sensitivity of the assay used for determining phenotype, between 66% (growth and 53% (gene expression of Saccharomyces cerevisiae gene deletion strains show no defect when analyzed under a single condition. Although it is well known that this non-responsive behavior is caused by different types of redundancy mechanisms or by growth condition/cell type dependency, it is not known what the relative contribution of these different causes is. Understanding the underlying causes of and their relative contribution to non-responsive behavior upon genetic perturbation is extremely important for designing efficient strategies aimed at elucidating gene function and unraveling complex cellular systems. Here, we provide a systematic classification of the underlying causes of and their relative contribution to non-responsive behavior upon gene deletion. The overall contribution of redundancy to non-responsive behavior is estimated at 29%, of which approximately 17% is due to homology-based redundancy and 12% is due to pathway-based redundancy. The major determinant of non-responsiveness is condition dependency (71%. For approximately 14% of protein complexes, just-in-time assembly can be put forward as a potential mechanistic explanation for how proteins can be regulated in a condition dependent manner. Taken together, the results underscore the large contribution of growth condition requirement to non-responsive behavior, which needs to be taken into account for strategies aimed at determining gene function. The classification provided here, can also be further harnessed in systematic analyses of complex cellular systems.

  19. Mathematical modeling of growth of Salmonella in raw ground beef under isothermal conditions from 10 to 45 Degree C

    The objective of this study was to develop primary and secondary models to describe the growth of Salmonella in raw ground beef. Primary and secondary models can be integrated into a dynamic model that can predict the microbial growth under varying environmental conditions. Growth data of Salmonel...

  20. Optimization of Design Parameters and Operating Conditions of Electrochemical Capacitors for High Energy and Power Performance

    Ike, Innocent S.; Sigalas, Iakovos; Iyuke, Sunny E.

    2017-03-01

    Theoretical expressions for performance parameters of different electrochemical capacitors (ECs) have been optimized by solving them using MATLAB scripts as well as via the MATLAB R2014a optimization toolbox. The performance of the different kinds of ECs under given conditions was compared using theoretical equations and simulations of various models based on the conditions of device components, using optimal values for the coefficient associated with the battery-kind material ( K BMopt) and the constant associated with the electrolyte material ( K Eopt), as well as our symmetric electric double-layer capacitor (EDLC) experimental data. Estimation of performance parameters was possible based on values for the mass ratio of electrodes, operating potential range ratio, and specific capacitance of electrolyte. The performance of asymmetric ECs with suitable electrode mass and operating potential range ratios using aqueous or organic electrolyte at appropriate operating potential range and specific capacitance was 2.2 and 5.56 times greater, respectively, than for the symmetric EDLC and asymmetric EC using the same aqueous electrolyte, respectively. This enhancement was accompanied by reduced cell mass and volume. Also, the storable and deliverable energies of the asymmetric EC with suitable electrode mass and operating potential range ratios using the proper organic electrolyte were 12.9 times greater than those of the symmetric EDLC using aqueous electrolyte, again with reduced cell mass and volume. The storable energy, energy density, and power density of the asymmetric EDLC with suitable electrode mass and operating potential range ratios using the proper organic electrolyte were 5.56 times higher than for a similar symmetric EDLC using aqueous electrolyte, with cell mass and volume reduced by a factor of 1.77. Also, the asymmetric EDLC with the same type of electrode and suitable electrode mass ratio, working potential range ratio, and proper organic electrolyte