WorldWideScience

Sample records for optically addressable micro-fluidic

  1. Fabrication and characterization of micro fluidic based fiber optic refractive index sensor

    Directory of Open Access Journals (Sweden)

    I.S.L. Abdul Hamid

    2017-04-01

    Full Text Available A refractive index sensor was proposed by using 3 dimension (3D grayscale lithography technique. Optical fiber with taper diameter of 12 μm was embedded in a closed microfluidic channel. Taper area of optical fiber is in floating condition at the center of micro channel. Grayscale variation range used for this sensor was 70%–74% and thickness variation 430 μm–694 μm was achieved. The dimension of the sensor was 7.5 cm in length and 2 cm in width. Fabricated sensor was characterized with air condition and solution concentration from 0.1 M to 1 M. A sensitivity of 1457 nm/RIU is achieved. The measured results show a good repeatability and low temperature cross-sensitivity.

  2. Challenges in high accuracy surface replication for micro optics and micro fluidics manufacture

    DEFF Research Database (Denmark)

    Tosello, Guido; Hansen, Hans Nørgaard; Calaon, Matteo;

    2014-01-01

    by replication technologies such as nickel electroplating. All replication steps are enabled by a high precision master and high reproduction fidelity to ensure that the functionalities associated with the design are transferred to the final component. Engineered surface micro structures can be either......Patterning the surface of polymer components with microstructured geometries is employed in optical and microfluidic applications. Mass fabrication of polymer micro structured products is enabled by replication technologies such as injection moulding. Micro structured tools are also produced...... distributed, e.g., to create an optical pattern, or discretised, e.g., as micro channels for fluids manipulation. Key aspects of two process chains based on replication technologies for both types of micro structures are investigated: lateral replication fidelity, dimensional control at micro scale, edge...

  3. A Coupled Cavity Micro Fluidic Dye Ring Laser

    CERN Document Server

    Gersborg-Hansen, M; Mortensen, N A; Kristensen, A

    2004-01-01

    We present a laterally emitting, coupled cavity micro fluidic dye ring laser, suitable for integration into lab-on-a-chip micro systems. The micro-fluidic laser has been successfully designed, fabricated, characterized and modelled. The resonator is formed by a micro-fluidic channel bounded by two isosceles triangle mirrors. The micro-fluidic laser structure is defined using photo lithography in 10 microns thick SU-8 polymer on a glass substrate. The micro fluidic channel is sealed by a glass lid, using PMMA adhesive bonding. The laser is characterized using the laser dye Rhodamine 6G dissolved in ethanol or ethylene glycol as the active gain medium, which is pumped through the micro-fluidic channel and laser resonator. The dye laser is optically pumped normal to the chip plane at 532 nm by a pulsed, frequency doubled Nd:YAG laser and lasing is observed with a threshold pump pulse energy flux of around 55 micro-Joule/square-milimeter. The lasing is multi-mode, and the laser has switchable output coupling into...

  4. Design and fabrication of a micro fluidic circuit for the separation of micron sized particles

    CSIR Research Space (South Africa)

    Khumalo, F

    2009-07-01

    Full Text Available The development of a micro fluidic circuit for the separation of micro particles is being investigated. There are a wide range of available separation techniques such as acoustic, laminar flow, split flow, optical trapping and centrifugal forces...

  5. Integration of biological ion channels onto optically addressable micro-fluidic electrode arrays for single molecule characterization.

    Energy Technology Data Exchange (ETDEWEB)

    Brozik, Susan Marie; Frink, Laura J. Douglas; Bachand, George David; Keller, David J. (University of New Mexico, Albuquerque, NM); Patrick, Elizabeth L.; Marshall, Jason A. (University of New Mexico, Albuquerque, NM); Ortiz, Theodore P. (University of New Mexico, Albuquerque, NM); Meyer, Lauren A. (University of New Mexico, Albuquerque, NM); Davis, Ryan W. (University of New Mexico, Albuquerque, NM); Brozik, James A. (University of New Mexico, Albuquerque, NM); Flemming, Jeb Hunter

    2004-12-01

    The challenge of modeling the organization and function of biological membranes on a solid support has received considerable attention in recent years, primarily driven by potential applications in biosensor design. Affinity-based biosensors show great promise for extremely sensitive detection of BW agents and toxins. Receptor molecules have been successfully incorporated into phospholipid bilayers supported on sensing platforms. However, a collective body of data detailing a mechanistic understanding of membrane processes involved in receptor-substrate interactions and the competition between localized perturbations and delocalized responses resulting in reorganization of transmembrane protein structure, has yet to be produced. This report describes a systematic procedure to develop detailed correlation between (recognition-induced) protein restructuring and function of a ligand gated ion channel by combining single molecule fluorescence spectroscopy and single channel current recordings. This document is divided into three sections: (1) reported are the thermodynamics and diffusion properties of gramicidin using single molecule fluorescence imaging and (2) preliminary work on the 5HT{sub 3} serotonin receptor. Thirdly, we describe the design and fabrication of a miniaturized platform using the concepts of these two technologies (spectroscopic and single channel electrochemical techniques) for single molecule analysis, with a longer term goal of using the physical and electronic changes caused by a specific molecular recognition event as a transduction pathway in affinity based biosensors for biotoxin detection.

  6. Low-cost thermoforming of micro fluidic analysis chips

    Science.gov (United States)

    Truckenmüller, R.; Rummler, Z.; Schaller, Th; Schomburg, W. K.

    2002-07-01

    We present a new method for the low-cost manufacture of micro fluidic devices from polymers for single use. Within a one-step or two-step process inside a hot embossing press, micro channels are thermoformed into a thin plastic film and welded on to a thicker plastic film or sheet. Sterile, hermetically sealed micro fluidic structures were fabricated from polystyrene for easy opening immediately before use. It even appears to be possible to produce micro fluidic analysis chips from polymers on a coil from which single devices are cut off for use.

  7. pH-Sensitive Hydrogel for Micro-Fluidic Valve

    Directory of Open Access Journals (Sweden)

    Zhengzhi Yang

    2012-07-01

    Full Text Available The deformation behavior of a pH-sensitive hydrogel micro-fluidic valve system is investigated using inhomogeneous gel deformation theory, in which the fluid-structure interaction (FSI of the gel solid and fluid flow in the pipe is considered. We use a finite element method with a well adopted hydrogel constitutive equation, which is coded in commercial software, ABAQUS, to simulate the hydrogel valve swelling deformation, while FLUENT is adopted to model the fluid flow in the pipe of the hydrogel valve system. The study demonstrates that FSI significantly affects the gel swelling deformed shapes, fluid flow pressure and velocity patterns. FSI has to be considered in the study on fluid flow regulated by hydrogel microfluidic valve. The study provides a more accurate and adoptable model for future design of new pH-sensitive hydrogel valves, and also gives a useful guideline for further studies on hydrogel fluidic applications.

  8. A micro-fluidic study of whole blood behaviour on PMMA topographical nanostructures

    Directory of Open Access Journals (Sweden)

    Tsud Nataliya

    2008-02-01

    Full Text Available Abstract Background Polymers are attractive materials for both biomedical engineering and cardiovascular applications. Although nano-topography has been found to influence cell behaviour, no established method exists to understand and evaluate the effects of nano-topography on polymer-blood interaction. Results We optimized a micro-fluidic set-up to study the interaction of whole blood with nano-structured polymer surfaces under flow conditions. Micro-fluidic chips were coated with polymethylmethacrylate films and structured by polymer demixing. Surface feature size varied from 40 nm to 400 nm and feature height from 5 nm to 50 nm. Whole blood flow rate through the micro-fluidic channels, platelet adhesion and von Willebrand factor and fibrinogen adsorption onto the structured polymer films were investigated. Whole blood flow rate through the micro-fluidic channels was found to decrease with increasing average surface feature size. Adhesion and spreading of platelets from whole blood and von Willebrand factor adsorption from platelet poor plasma were enhanced on the structured surfaces with larger feature, while fibrinogen adsorption followed the opposite trend. Conclusion We investigated whole blood behaviour and plasma protein adsorption on nano-structured polymer materials under flow conditions using a micro-fluidic set-up. We speculate that surface nano-topography of polymer films influences primarily plasma protein adsorption, which results in the control of platelet adhesion and thrombus formation.

  9. Vibration interference analysis and verification of micro-fluidic inertial switch

    Directory of Open Access Journals (Sweden)

    Liu Tingting

    2014-02-01

    Full Text Available The micro-fluidic inertial switch based on liquid metal utilizes the moving mercury droplet to close the switch under the action of acceleration, which is characterized by no moving parts, small contact resistance, long service life and large current. In addition to the requirement of response time, accuracy and reliability, the micro-fluidic inertial switch needs to overcome the impact of the ambient vibration. The influence of the ambient vibration on the performance of switch is investigated by loading pulse or sinusoidal interference signals in the X, Y and Z direction. The numerical results suggest that the performance of micro-fluidic inertial switch is greatly affected by impact interference signal in X sensitive direction as compared with low frequency harmonic signal. If the impact signal with high amplitude lasts only for a short time, the wrong operation might also occur. The interference signals in insensitive direction have a relatively small impact on the performance of switch, and the impact of interference signal can be reduced by reasonable structural design. Finally, anodic bonding, deep reactive ion etching (DRIE and sputtering technique are adopted to fabricate the micro-fluidic inertial switch. The acceleration threshold of the prototype is tested. The experiment results agree with the numerical results, which indicate that the simulation method is valid.

  10. Vibration interference analysis and verification of micro-fluidic inertial switch

    Science.gov (United States)

    Tingting, Liu; Wei, Su; Tao, Yang; Yuan, Xu

    2014-03-01

    The micro-fluidic inertial switch based on liquid metal utilizes the moving mercury droplet to close the switch under the action of acceleration, which is characterized by no moving parts, small contact resistance, long service life and large current. In addition to the requirement of response time, accuracy and reliability, the micro-fluidic inertial switch needs to overcome the impact of the ambient vibration. The influence of the ambient vibration on the performance of switch is investigated by loading pulse or sinusoidal interference signals in the X, Y and Z direction. The numerical results suggest that the performance of micro-fluidic inertial switch is greatly affected by impact interference signal in X sensitive direction as compared with low frequency harmonic signal. If the impact signal with high amplitude lasts only for a short time, the wrong operation might also occur. The interference signals in insensitive direction have a relatively small impact on the performance of switch, and the impact of interference signal can be reduced by reasonable structural design. Finally, anodic bonding, deep reactive ion etching (DRIE) and sputtering technique are adopted to fabricate the micro-fluidic inertial switch. The acceleration threshold of the prototype is tested. The experiment results agree with the numerical results, which indicate that the simulation method is valid.

  11. Micro-Fluidic Dye Ring Laser - Experimental Tuning of the Wavelength and Numerical Simulation of the Cavity Modes

    DEFF Research Database (Denmark)

    Gersborg-Hansen, Morten; Balslev, Søren; Mortensen, Niels Asger

    2006-01-01

    We demonstrate wavelength tuning of a micro-fluidic dye ring laser. Wavelength tunability is obtained by controlling the liquid dye concentration. The device performance is modelled by FEM simulations supporting a ray-tracing view.......We demonstrate wavelength tuning of a micro-fluidic dye ring laser. Wavelength tunability is obtained by controlling the liquid dye concentration. The device performance is modelled by FEM simulations supporting a ray-tracing view....

  12. Fabrication of Biochips with Micro Fluidic Channels by Micro End-milling and Powder Blasting

    Directory of Open Access Journals (Sweden)

    Dong Sam Park

    2008-02-01

    Full Text Available For microfabrications of biochips with micro fluidic channels, a large number of microfabrication techniques based on silicon or glass-based Micro-Electro-Mechanical System (MEMS technologies were proposed in the last decade. In recent years, for low cost and mass production, polymer-based microfabrication techniques by microinjection molding and micro hot embossing have been proposed. These techniques, which require a proper photoresist, mask, UV light exposure, developing, and electroplating as a preprocess, are considered to have some problems. In this study, we propose a new microfabrication technology which consists of micro end-milling and powder blasting. This technique could be directly applied to fabricate the metal mold without any preprocesses. The metal mold with micro-channels is machined by micro end-milling, and then, burrs generated in the end-milling process are removed by powder blasting. From the experimental results, micro end-milling combined with powder blasting could be applied effectively for fabrication of the injection mold of biochips with micro fluidic channels.

  13. Investigation of the dye concentration influence on the lasing wavelength and threshold for a micro-fluidic dye laser

    DEFF Research Database (Denmark)

    Helbo, Bjarne; Kragh, Søren; Kjeldsen, B.G.;

    2003-01-01

    We investigate a micro-fluidic dye laser, which can be integrated with polymer-based lab-on-a-chip microsystems without further processing steps. A simple rate-equation model is used to predict the lasing threshold. The laser device is characterised using the laser dye Rhodamine 6G dissolved in e...

  14. Silicon micro-fluidic cooling for NA62 GTK pixel detectors

    CERN Document Server

    Romagnoli, G; Brunel, B; Catinaccio, A; Degrange, J; Mapelli, A; Morel, M; Noel, J; Petagna, P

    2015-01-01

    Silicon micro-channel cooling is being studied for efficient thermal management in application fields such as high power computing and 3D electronic integration. This concept has been introduced in 2010 for the thermal management of silicon pixel detectors in high energy physics experiments. Combining the versatility of standard micro-fabrication processes with the high thermal efficiency typical of micro-fluidics, it is possible to produce effective thermal management devices that are well adapted to different detector configurations. The production of very thin cooling devices in silicon enables a minimization of material of the tracking sensors and eliminates mechanical stresses due to the mismatch of the coefficient of thermal expansion between detectors and cooling systems. The NA62 experiment at CERN will be the first high particle physics experiment that will install a micro-cooling system to perform the thermal management of the three detection planes of its Gigatracker pixel detector.

  15. Fundamental Study on New Micro Fluidic Drive Method Based on Liquid Crystalline Backflow

    Directory of Open Access Journals (Sweden)

    Chunbo Liu

    2012-11-01

    Full Text Available In this study, we propose a one-dimensional simple model for predicting the performance of the new micro fluidic drive and then we have a research of the control method based on liquid crystalline backflow by combining the motion of the upper plate of a liquid crystal cell and the flow of a liquid crystal. Comparison of the numerical predictions and the experimental results shows that the proposed model is useful to predict qualitatively the motion the upper plate. The drive efficiency is affected by applied voltage, the frequency, the duty ratio and the gap of the cell. The ideal drive quality can be achieved when the rotation range of the molecules at the center of the cell is controlled within 50-80°.

  16. Optical trapping and tweezing using a spatial light modulator

    CSIR Research Space (South Africa)

    Ismail, Y

    2009-07-01

    Full Text Available properties within a channel of dimensions of approximately tens to hundreds micrometers achieved by the use of optical tweezing. The basic micro-fluidic channel is made Venturing into the field of Micro-fluidic Page 18 © CSIR 2009...

  17. Use of PLL-g-PEG in micro-fluidic devices for localizing selective and specific protein binding.

    Science.gov (United States)

    Marie, Rodolphe; Beech, Jason P; Vörös, Janos; Tegenfeldt, Jonas O; Höök, Fredrik

    2006-11-21

    By utilizing flow-controlled PLL-g-PEG and PLL-g-PEGbiotin modification of predefined regions of a poly(dimethylsiloxane) (PDMS) micro-fluidic device, with an intentionally chosen large (approximately 1 cm2) internal surface area, we report rapid (10 min), highly localized (6 x 10(-6) cm2), and specific surface-based protein capture from a sample volume (100 microL) containing a low amount of protein (160 attomol in pure buffer and 400 attomol in serum). The design criteria for this surface modification were achieved using QCM-D (quartz crystal microbalance with energy dissipation monitoring) of serum protein adsorption onto PLL-g-PEG-modified oxidized PDMS. Equally good, or almost as good, results were obtained for oxidized SU-8, Topas, and poly(methyl metacrylate) (PMMA), demonstrating the generic potential of PLL-g-PEG for surface modification in various micro-fluidic applications.

  18. Improved DNA extraction efficiency from low level cell numbers using a silica monolith based micro fluidic device.

    Science.gov (United States)

    Kashkary, Loay; Kemp, Cordula; Shaw, Kirsty J; Greenway, Gillian M; Haswell, Stephen J

    2012-10-31

    The evaluation of a micro fluidic system with an integrated silica monolith for performing DNA extraction from limited biological samples has been carried out. Low DNA target concentrations usually require the addition of carrier RNA to ensure desired extraction efficiencies. Here, we demonstrate a micro fluidic extraction system with increasingly efficient extraction performances for biological samples containing extracted DNA showed successful amplification via the polymerase chain reaction demonstrating both the effectiveness of the proposed system at removing potential inhibitors and yielding good quality DNA. The work presented here beneficially identifies reduced sample volumes/concentrations as suitable for processing with respect to downstream analysis by enabling pre-concentration of the biological sample, particularly important when dealing with clinical or forensic specimens.

  19. Optimization of elstomeric micro-fluidic valve dimensions using non-linear finite element methods

    Directory of Open Access Journals (Sweden)

    H Khawaja

    2016-04-01

    Full Text Available We use a nonlinear finite element (FE method model to compare,optimize and determine the limits for useful geometries of microfluidicvalves in elastomer polydimethylsiloxane (PDMS. Simulations havebeen performed with the aim of finding the optimal shape, size andlocation of pressurization that minimizes the pressure required to operatethe valve. One important constraint governing the design parameters isthat the stresses should be within elastic limits, so that the componentremains safe from any type of structural failure. To obtain reliable results,non-linear stress analysis was performed using the Mooney-Rivlin 9parameter approximation which is based on the Hyper Elastic MaterialModel. A 20 noded brick element was used for the development of FEmodel. Mesh sensitivity analysis was also performed to assess the qualityof the results. The simulations were performed with commerciallyavailable FE modeling software, developed by ANSYS Inc. to determinethe effect of varying different geometric parameters on the performanceof micro-fluidic valves.The aim of this work is to determine the geometry of the channel crosssectionthat would result in the largest deflection for the least appliedpressure, i.e. to minimize the pressure needed to operate the valve.

  20. A micro-fluidic treadmill for observing suspended plankton in the lab

    Science.gov (United States)

    Jaffe, J. S.; Laxton, B.; Garwood, J. C.; Franks, P. J. S.; Roberts, P. L.

    2016-02-01

    A significant obstacle to laboratory studies of interactions between small organisms ( mm) and their fluid environment is our ability to obtain high-resolution images while allowing freedom of motion. This is because as the organisms sink, they will often move out of the field of view of the observation system. One solution to this problem is to impose a water circulation pattern that preserves their location relative to the camera system while imaging the organisms away from the glass walls. To accomplish this we have designed and created a plankton treadmill. Our computer-controlled system consists of a digital video camera attached to a macro or microscope and a micro-fluidic pump whose flow is regulated to maintain a suspended organism's position relative to the field of view. Organisms are detected and tracked in real time in the video frames, allowing a control algorithm to compensate for any vertical movement by adjusting the flow. The flow control can be manually adjusted using on-screen controls, semi-automatically adjusted to allow the user to select a particular organism to be tracked or fully automatic through the use of classification and tracking algorithms. Experiments with a simple cm-sized cuvette and a number of organisms that are both positively and negatively buoyant have demonstrated the success of the system in permitting longer observation times than would be possible in the absence of a controlled-flow environment. The subjects were observed using a new dual-view, holographic imaging system that provides 3-dimensional microscopic observations with relatively isotropic resolution. We will present the system design, construction, the control algorithm, and some images obtained with the holographic system, demonstrating its effectiveness. Small particles seeded into the flow clearly show the 3D flow fields around the subjects as they freely sink or swim.

  1. Disposable micro-fluidic biosensor array for online parallelized cell adhesion kinetics analysis on quartz crystal resonators

    DEFF Research Database (Denmark)

    Cama, G.; Jacobs, T.; Dimaki, Maria

    2010-01-01

    In this contribution we present a new disposable micro-fluidic biosensor array for the online analysis of adherent Madin Darby canine kidney (MDCK-II) cells on quartz crystal resonators (QCRs). The device was conceived for the parallel cultivation of cells providing the same experimental conditions...... molding process was simulated in order to optimize the mold geometry and minimize the shrinkage and the warpage of the parts. MDCK-II cells were cultivated in the biosensor array. Parallel cultivation of cells on the gold surface of the QCRs led to first observations of the impact of the cell distribution...

  2. Rapid, single-molecule assays in nano/micro-fluidic chips with arrays of closely spaced parallel channels fabricated by femtosecond laser machining.

    Science.gov (United States)

    Canfield, Brian K; King, Jason K; Robinson, William N; Hofmeister, William H; Davis, Lloyd M

    2014-08-20

    Cost-effective pharmaceutical drug discovery depends on increasing assay throughput while reducing reagent needs. To this end, we are developing an ultrasensitive, fluorescence-based platform that incorporates a nano/micro-fluidic chip with an array of closely spaced channels for parallelized optical readout of single-molecule assays. Here we describe the use of direct femtosecond laser machining to fabricate several hundred closely spaced channels on the surfaces of fused silica substrates. The channels are sealed by bonding to a microscope cover slip spin-coated with a thin film of poly(dimethylsiloxane). Single-molecule detection experiments are conducted using a custom-built, wide-field microscope. The array of channels is epi-illuminated by a line-generating red diode laser, resulting in a line focus just a few microns thick across a 500 micron field of view. A dilute aqueous solution of fluorescently labeled biomolecules is loaded into the device and fluorescence is detected with an electron-multiplying CCD camera, allowing acquisition rates up to 7 kHz for each microchannel. Matched digital filtering based on experimental parameters is used to perform an initial, rapid assessment of detected fluorescence. More detailed analysis is obtained through fluorescence correlation spectroscopy. Simulated fluorescence data is shown to agree well with experimental values.

  3. A High-Voltage Integrated Circuit Engine for a Dielectrophoresis-based Programmable Micro-Fluidic Processor

    Science.gov (United States)

    Current, K. Wayne; Yuk, Kelvin; McConaghy, Charles; Gascoyne, Peter R. C.; Schwartz, Jon A.; Vykoukal, Jody V.; Andrews, Craig

    2010-01-01

    A high-voltage (HV) integrated circuit has been demonstrated to transport droplets on programmable paths across its coated surface. This chip is the engine for a dielectrophoresis (DEP)-based micro-fluidic lab-on-a-chip system. This chip creates DEP forces that move and help inject droplets. Electrode excitation voltage and frequency are variable. With the electrodes driven with a 100V peak-to-peak periodic waveform, the maximum high-voltage electrode waveform frequency is about 200Hz. Data communication rate is variable up to 250kHz. This demonstration chip has a 32×32 array of nominally 100V electrode drivers. It is fabricated in a 130V SOI CMOS fabrication technology, dissipates a maximum of 1.87W, and is about 10.4 mm × 8.2 mm. PMID:23989241

  4. Integrated optical addressing of an ion qubit

    CERN Document Server

    Mehta, Karan K; McConnell, Robert; Ram, Rajeev J; Sage, Jeremy M; Chiaverini, John

    2015-01-01

    Scalable implementation of the optics required to control trapped atomic ions' quantum states will be required to construct large-scale ion trap quantum information processors. All experiments in ion traps so far have employed approaches cumbersome to scale to even a few tens of qubits, with the majority relying on manipulation of free space beams with bulk optics. Here we demonstrate lithographically defined nanophotonic dielectric waveguides integrated within a linear surface-electrode ion trap chip, and qubit addressing at multiple locations via focusing grating couplers that emit through openings in the trap electrodes to an ion trapped 50 $\\mu$m above the chip. We perform quantum coherent operations using visible light routed in and emitted from silicon nitride waveguides and couplers, on the optical qubit transition in individual $^{88}$Sr$^+$ ions. The addressing beam is focused near the ion position with a 2 $\\mu$m 1/$e^2$-radius along the trap axis, and we measure crosstalk errors between $10^{-2}$ a...

  5. Integrated optical addressing of an ion qubit.

    Science.gov (United States)

    Mehta, Karan K; Bruzewicz, Colin D; McConnell, Robert; Ram, Rajeev J; Sage, Jeremy M; Chiaverini, John

    2016-12-01

    The long coherence times and strong Coulomb interactions afforded by trapped ion qubits have enabled realizations of the necessary primitives for quantum information processing and the highest-fidelity quantum operations in any qubit to date. Although light delivery to each individual ion in a system is essential for general quantum manipulations and readout, experiments so far have employed optical systems that are cumbersome to scale to even a few tens of qubits. Here we demonstrate lithographically defined nanophotonic waveguide devices for light routing and ion addressing that are fully integrated within a surface-electrode ion trap chip. Ion qubits are addressed at multiple locations via focusing grating couplers emitting through openings in the trap electrodes to ions trapped 50 μm above the chip; using this light, we perform quantum coherent operations on the optical qubit transition in individual (88)Sr(+) ions. The grating focuses the beam to a diffraction-limited spot near the ion position with 2 μm 1/e(2) radius along the trap axis, and we measure crosstalk errors between 10(-2) and 4 × 10(-4) at distances 7.5-15 μm from the beam centre. Owing to the scalability of the planar fabrication technique employed, together with the tight focusing and stable alignment afforded by the integration of the optics within the trap chip, this approach presents a path to creating the optical systems required for large-scale trapped-ion quantum information processing.

  6. Integrated optical addressing of an ion qubit

    Science.gov (United States)

    Mehta, Karan K.; Bruzewicz, Colin D.; McConnell, Robert; Ram, Rajeev J.; Sage, Jeremy M.; Chiaverini, John

    2016-12-01

    The long coherence times and strong Coulomb interactions afforded by trapped ion qubits have enabled realizations of the necessary primitives for quantum information processing and the highest-fidelity quantum operations in any qubit to date. Although light delivery to each individual ion in a system is essential for general quantum manipulations and readout, experiments so far have employed optical systems that are cumbersome to scale to even a few tens of qubits. Here we demonstrate lithographically defined nanophotonic waveguide devices for light routing and ion addressing that are fully integrated within a surface-electrode ion trap chip. Ion qubits are addressed at multiple locations via focusing grating couplers emitting through openings in the trap electrodes to ions trapped 50 μm above the chip; using this light, we perform quantum coherent operations on the optical qubit transition in individual 88Sr+ ions. The grating focuses the beam to a diffraction-limited spot near the ion position with 2 μm 1/e2 radius along the trap axis, and we measure crosstalk errors between 10-2 and 4 × 10-4 at distances 7.5-15 μm from the beam centre. Owing to the scalability of the planar fabrication technique employed, together with the tight focusing and stable alignment afforded by the integration of the optics within the trap chip, this approach presents a path to creating the optical systems required for large-scale trapped-ion quantum information processing.

  7. Transport coefficients for electrolytes in arbitrarily shaped nano and micro-fluidic channels

    CERN Document Server

    Mortensen, N A; Olesen, L H

    2006-01-01

    We consider laminar flow of incompressible electrolytes in long, straight channels driven by pressure and electro-osmosis. We use a Hilbert space eigenfunction expansion to address the general problem of an arbitrary cross section and obtain general results in linear-response theory for the hydraulic and electrical transport coefficients which satisfy Onsager relations. In the limit of non-overlapping Debye layers the transport coefficients are simply expressed in terms of parameters of the electrolyte as well as the geometrical correction factor for the Hagen-Poiseuille part of the problem. In particular, we consider the limits of thin non-overlapping as well as strongly overlapping Debye layers, respectively, and calculate the corrections to the hydraulic resistance due to electro-hydrodynamic interactions.

  8. Micro Fluidic Channel Machining on Fused Silica Glass Using Powder Blasting

    Directory of Open Access Journals (Sweden)

    Dong-Sam Park

    2008-02-01

    Full Text Available In this study, micro fluid channels are machined on fused silica glass via powder blasting, a mechanical etching process, and the machining characteristics of the channels are experimentally evaluated. In the process, material removal is performed by the collision of micro abrasives injected by highly compressed air on to the target surface. This approach can be characterized as an integration of brittle mode machining based on micro crack propagation. Fused silica glass, a high purity synthetic amorphous silicon dioxide, is selected as a workpiece material. It has a very low thermal expansion coefficient and excellent optical qualities and exceptional transmittance over a wide spectral range, especially in the ultraviolet range. The powder blasting process parameters affecting the machined results are injection pressure, abrasive particle size and density, stand-off distance, number of nozzle scanning, and shape/size of the required patterns. In this study, the influence of the number of nozzle scanning, abrasive particle size, and pattern size on the formation of micro channels is investigated. Machined shapes and surface roughness are measured using a 3-dimensional vision profiler and the results are discussed.

  9. Semi-automated bacterial spore detection system with micro-fluidic chips for aerosol collection, spore treatment and ICAN DNA detection.

    Science.gov (United States)

    Inami, Hisao; Tsuge, Kouichiro; Matsuzawa, Mitsuhiro; Sasaki, Yasuhiko; Togashi, Shigenori; Komano, Asuka; Seto, Yasuo

    2009-07-15

    A semi-automated bacterial spore detection system (BSDS) was developed to detect biological threat agents (e.g., Bacillus anthracis) on-site. The system comprised an aerosol sampler, micro-fluidic chip-A (for spore germination and cell lysis), micro-fluidic chip-B (for extraction and detection of genomic DNA) and an analyzer. An aerosol with bacterial spores was first collected in the collection chamber of chip-A with a velocity of 300 l/min, and the chip-A was taken off from the aerosol sampler and loaded into the analyzer. Reagents packaged in the chip-A were sequentially applied into the chamber. The genomic DNA extract from spore lyzate was manually transferred from chip-A to chip-B and loaded into the analyzer. Genomic DNA in chip-B was first trapped on a glass bead column, washed with various reagents, and eluted to the detection chamber by sequential auto-dispensing. Isothermal and chimeric primer-initiated amplification of nucleic acids (ICAN) with fluorescent measurement was adopted to amplify and detect target DNA. Bacillus subtilis was the stimulant of biological warfare agent in this experiment. Pretreatment conditions were optimized by examining bacterial target DNA recovery in the respective steps (aerosol collection, spore germination, cell lysis, and DNA extraction), by an off-chip experiment using a real-time polymerase chain reaction quantification method. Without the germination step, B. subtilis spores did not demonstrate amplification of target DNA. The detection of 10(4) spores was achieved within 2h throughout the micro-fluidic process.

  10. Automated micro fluidic system for PCR applications in the monitoring of drinking water quality; Aplicacion de sistemas bionaliticos integrados sobre plataformas de microfluidica en el control de la calidad microbiologica del agua

    Energy Technology Data Exchange (ETDEWEB)

    Soria Soria, E.; Yanez Amoros, A.; Murtula Corbi, R.; Catalan Cuenca, V.; Martin-Cisneros, C. S.; Ymbern, O.; Alonso-Chamorro, J.

    2009-07-01

    Microbiological laboratories present a growing interest in automated, simple and user-friendly methodologies able to perform simultaneous analysis of a high amount of samples. Analytical tools based on micro-fluidic could play an important role in this field. In this work, the development of an automated micro fluidic system for PCR applications and aimed to monitoring of drinking water quality is presented. The device will be able to determine, simultaneously, fecal pollution indicators and water-transmitted pathogens. Further-more, complemented with DNA pre-concentration and extraction modules, the device would present a highly integrated solution for microbiological diagnostic laboratories. (Author) 13 refs.

  11. Parallel Memory Addressing Using Coincident Optical Pulses

    Science.gov (United States)

    1989-09-15

    defined for Al and M, respectively, and at each does not have to be the same for every pair of adjacent destination nodeje D, u D2, the number of...system, a register SKIP may be used at each nodej has to skip before reading the messages addressed node to indicate the number of messages to be

  12. Optical CAM architecture for address lookup at 10 Gbps

    Science.gov (United States)

    Maniotis, P.; Terzenidis, N.; Pleros, N.

    2017-02-01

    Content Addressable Memories (CAMs) are widely used in nowadays router applications due to their fast bit searching capabilities. However, address loop-up operation cannot still keep up with high data-rate speeds of optical packet payload due to the limited speeds offered by electronic technology, which hardly can reach a few GHz. Despite this limitation, optics has still not managed to penetrate in the area of address look-up and forwarding operations due to the complete lack of optical CAM-based solutions. To the best of our knowledge, the first all-optical binary CAM cell has been only recently experimentally demonstrated by our group using an all-optical monolithically integrated InP Flip-Flop and an optical XOR gate, revealing error-free operation at 10 Gbps for both Content Addressing and Content Writing operations. In this paper, we extend our previous work by presenting for the first time to our knowledge an all-optical Ternary CAM cell architecture that allows also for a third matching state of "X" or "don't care", thus adding the necessary searching flexibility required by modern CAM-based solutions for supporting subnet-masked addresses. Moreover, we exploit the optical Ternary CAM cell towards deploying a complete CAM row formed by 4 Ternary CAM cells, demonstrating its operation through VPI simulations at 10 Gbps for an indicative 2 bit packet address and for both Content Addressing and Content Writing functionalities. The potential of this memory architecture to allow for up to 40 Gbps operation could presumably lead to fast CAM-based routing applications by enabling all-optical Address Lookup schemes.

  13. Effects of Interfaces on Dynamics in Micro-Fluidic Devices: Slip-Boundaries’ Impact on Rotation Characteristics of Polar Liquid Film Motors

    Science.gov (United States)

    Jiang, Su-Rong; Liu, Zhong-Qiang; Amos Yinnon, Tamar; Kong, Xiang-Mu

    2017-05-01

    A new approach for exploring effects of interfaces on polar liquids is presented. Their impact on the polar liquid film motor (PLFM) - a novel micro-fluidic device - is studied. We account for the interface’s impact by modeling slip boundary effects on the PLFM’s electro-hydro-dynamical rotations. Our analytical results show as k={l}s/R increases (with {l}s denoting the slip length resulting from the interface’s impact on the film’s properties, k > -1 and R denoting the film’s radius): (a) PLFMs subsequently exhibit rotation characteristics under “negative-”, “no-”, “partial-” and “perfect-” slip boundary conditions; (b) The maximum value of the linear velocity of the steady rotating film increases linearly and its location approaches the film’s border; (c) The decay of the angular velocities’ dependency on the distance from the center of the film slows down, resulting in a macroscopic flow near the boundary. With our calculated rotation speed distributions consistent with the existing experimental ones, research aiming at fitting computed to measured distributions promises identifying the factors affecting {l}s, e.g., solid-fluid potential interactions and surface roughness. The consistency also is advantageous for optimizing PLFM’s applications as micro-washers, centrifuges, mixers in the lab-on-a-chip. Supported by National Natural Science Foundation of China under Grant Nos. 11302118, 11275112, and Natural Science Foundation of Shandong Province under Grant No. ZR2013AQ015

  14. Novel preparation of controlled porosity particle/fibre loaded scaffolds using a hybrid micro-fluidic and electrohydrodynamic technique.

    Science.gov (United States)

    Parhizkar, Maryam; Sofokleous, Panagiotis; Stride, Eleanor; Edirisinghe, Mohan

    2014-11-27

    The purpose of this research was to produce multi-dimensional scaffolds containing biocompatible particles and fibres. To achieve this, two techniques were combined and used: T-Junction microfluidics and electrohydrodynamic (EHD) processing. The former was used to form layers of monodispersed bovine serum albumin (BSA) bubbles, which upon drying formed porous scaffolds. By altering the T-Junction processing parameters, bubbles with different diameters were produced and hence the scaffold porosity could be controlled. EHD processing was used to spray or spin poly(lactic-co-glycolic) (PLGA), polymethysilsesquioxane (PMSQ) and collagen particles/fibres onto the scaffolds during their production and after drying. As a result, multifunctional BSA scaffolds with controlled porosity containing PLGA, PMSQ and collagen particles/fibres were obtained. Product morphology was studied by optical and scanning electron microscopy. These products have potential applications in many advanced biomedical, pharmaceutical and cosmetic fields e.g. bone regeneration, drug delivery, cosmetic cream lathers, facial scrubbing creams etc.

  15. Optically addressed ultra-wideband phased antenna array

    Science.gov (United States)

    Bai, Jian

    Demands for high data rate and multifunctional apertures from both civilian and military users have motivated development of ultra-wideband (UWB) electrically steered phased arrays. Meanwhile, the need for large contiguous frequency is pushing operation of radio systems into the millimeter-wave (mm-wave) range. Therefore, modern radio systems require UWB performance from VHF to mm-wave. However, traditional electronic systems suffer many challenges that make achieving these requirements difficult. Several examples includes: voltage controlled oscillators (VCO) cannot provide a tunable range of several octaves, distribution of wideband local oscillator signals undergo high loss and dispersion through RF transmission lines, and antennas have very limited bandwidth or bulky sizes. Recently, RF photonics technology has drawn considerable attention because of its advantages over traditional systems, with the capability of offering extreme power efficiency, information capacity, frequency agility, and spatial beam diversity. A hybrid RF photonic communication system utilizing optical links and an RF transducer at the antenna potentially provides ultra-wideband data transmission, i.e., over 100 GHz. A successful implementation of such an optically addressed phased array requires addressing several key challenges. Photonic generation of an RF source with over a seven-octave bandwidth has been demonstrated in the last few years. However, one challenge which still remains is how to convey phased optical signals to downconversion modules and antennas. Therefore, a feed network with phase sweeping capability and low excessive phase noise needs to be developed. Another key challenge is to develop an ultra-wideband array antenna. Modern frontends require antennas to be compact, planar, and low-profile in addition to possessing broad bandwidth, conforming to stringent space, weight, cost, and power constraints. To address these issues, I will study broadband and miniaturization

  16. Micro-fluidic (Lab-on the- Chip) PCR Array Cartridge for Biological Screening in a Hand Held Device: FInal Report for CRADA no 264. PNNL-T2-258-RU with CombiMatrix Corp

    Energy Technology Data Exchange (ETDEWEB)

    Rainina, Evguenia I.

    2010-10-31

    The worldwide emergence of both new and old diseases resulting from human expansion and also human and materials mobility has and will continue to place stress on both medical and clinical diagnostics. The classical approach to bioagents detection involves the use of differential metabolic assays to determine species type in the case of most bacteria, or the use of cell culture and electron microscopy to diagnose viruses and some bacteria that are intracellular parasites. The long-term goal in bioagent detection is to develop a hand-held instrument featuring disposable cartridges which contain all the necessary reagents, reaction chambers, waste chambers, and micro-fluidics to extract, concentrate, amplify, and analyze nucleic acids. This GIPP project began development of a sensory platform using nucleic-acid based probes. Although research was not completed, initial findings indicated that an advanced sensing device could theoretically be built on a DNA/RNA-based technology platform.

  17. Hyperresolving phase-only filters with an optically addressable liquid crystal spatial light modulator.

    Science.gov (United States)

    McOrist, J; Sharma, M D; Sheppard, C J R; West, E; Matsuda, K

    2003-01-01

    Hyperresolving (sometimes called 'superresolving' or 'ultraresolving') phase-only filters can be generated using an optically addressable liquid crystal spatial light modulator. This approach avoids the problems of low efficiency, and coupling between amplitude and phase modulation, that arise when using conventional liquid crystal modulators. When addressed by a programmed light intensity distribution, it allows filters to be changed rapidly to modify the response of a system or permit the investigation of different filter designs. In this paper we present experimental hyperresolved images obtained using an optically addressable parallel-aligned nematic LCD with two zone Toraldo type phase-only filters. The images are compared with theoretical predictions.

  18. Surface Plasmon mediated near-field imaging and optical addressing in nanoscience

    CERN Document Server

    Drezet, A; Krenn, J R; Brun, M; Huant, S

    2007-01-01

    We present an overview of recent progress in plasmonics. We focus our study on the observation and excitation of surface plasmon polaritons (SPPs) with optical near-field microscopy. We discuss in particular recent applications of photon scanning tunnelling microscope (PSTM) for imaging of SPP propagating in metal and dielectric wave guides. We show how near-field scanning optical microscopy (NSOM) can be used to optically and actively address remotely nano-objects such as quantum dots. Additionally we compare results obtained with near-field microscopy to those obtained with other optical far-field methods of analysis such as leakage radiation microscopy (LRM).

  19. Photonic gene circuits by optically addressable siRNA-Au nanoantennas.

    Science.gov (United States)

    Lee, Somin Eunice; Sasaki, Darryl Y; Park, Younggeun; Xu, Ren; Brennan, James S; Bissell, Mina J; Lee, Luke P

    2012-09-25

    The precise perturbation of gene circuits and the direct observation of signaling pathways in living cells are essential for both fundamental biology and translational medicine. Current optogenetic technology offers a new paradigm of optical control for cells; however, this technology relies on permanent genomic modifications with light-responsive genes, thus limiting dynamic reconfiguration of gene circuits. Here, we report precise control of perturbation and reconfiguration of gene circuits in living cells by optically addressable siRNA-Au nanoantennas. The siRNA-Au nanoantennas fulfill dual functions as selectively addressable optical receivers and biomolecular emitters of small interfering RNA (siRNA). Using siRNA-Au nanoantennas as optical inputs to existing circuit connections, photonic gene circuits are constructed in living cells. We show that photonic gene circuits are modular, enabling subcircuits to be combined on-demand. Photonic gene circuits open new avenues for engineering functional gene circuits useful for fundamental bioscience, bioengineering, and medical applications.

  20. Quantum Computation with Neutral Atoms at Addressable Optical Lattice Sites and Atoms in Confined Geometries

    Science.gov (United States)

    2014-10-13

    Félix Riou, Aaron Reinhard, Laura A. Zundel, David S. Weiss. Spontaneous-emission- induced transition rates between atomic states in optical lattices...complementary technique to measure the hyperfine states at each lattice site. We developed a technique to cool atoms so that they are mostly in the vibrational ...28-Feb-2013 Approved for Public Release; Distribution Unlimited Final Report: Quantum Computation with Neutral Atoms at Addressable Optical Lattice

  1. Double remote electrochemical addressing and optical readout of electrochemiluminescence at the tip of an optical fiber.

    Science.gov (United States)

    Li, Haidong; Garrigue, Patrick; Bouffier, Laurent; Arbault, Stéphane; Kuhn, Alexander; Sojic, Neso

    2016-07-21

    In this work, we report an original strategy for the wireless electrochemical generation of light at the tip of an optical fiber bundle, coupled with a simultaneous remote readout. An optical fiber bundle coated with a nanometer-thin gold film acts as a dual platform, on the one hand to locally generate electrochemiluminescence (ECL) in a wireless manner by bipolar electrochemistry, and on the other hand to guide the resulting ECL signal. The light emission is triggered and collected at one end, transmitted by the waveguide and remotely detected at the opposite end. Integration of both functionalities at the level of the same miniaturized object leads to an unprecedented bipolar opto-electrode, allowing one to quantify the ECL intensity as a function of different parameters in a double remote approach with interesting potential applications, ranging from high-throughput catalyst screening to massive parallel biochemical analysis.

  2. Coherent addressing of individual neutral atoms in a 3D optical lattice

    CERN Document Server

    Wang, Yang; Corcovilos, Theodore A; Kumar, Aishwarya; Weiss, David S

    2015-01-01

    We demonstrate arbitrary coherent addressing of individual neutral atoms in a $5\\times 5\\times 5$ array formed by an optical lattice. Addressing is accomplished using rapidly reconfigurable crossed laser beams to selectively ac Stark shift target atoms, so that only target atoms are resonant with state-changing microwaves. The effect of these targeted single qubit gates on the quantum information stored in non-targeted atoms is smaller than $3\\times 10^{-3}$ in state fidelity. This is an important step along the path of converting the scalability promise of neutral atoms into reality.

  3. Coherent Addressing of Individual Neutral Atoms in a 3D Optical Lattice.

    Science.gov (United States)

    Wang, Yang; Zhang, Xianli; Corcovilos, Theodore A; Kumar, Aishwarya; Weiss, David S

    2015-07-24

    We demonstrate arbitrary coherent addressing of individual neutral atoms in a 5×5×5 array formed by an optical lattice. Addressing is accomplished using rapidly reconfigurable crossed laser beams to selectively ac Stark shift target atoms, so that only target atoms are resonant with state-changing microwaves. The effect of these targeted single qubit gates on the quantum information stored in nontargeted atoms is smaller than 3×10^{-3} in state fidelity. This is an important step along the path of converting the scalability promise of neutral atoms into reality.

  4. Towards high-resolution retinal prostheses with direct optical addressing and inductive telemetry

    Science.gov (United States)

    Ha, Sohmyung; Khraiche, Massoud L.; Akinin, Abraham; Jing, Yi; Damle, Samir; Kuang, Yanjin; Bauchner, Sue; Lo, Yu-Hwa; Freeman, William R.; Silva, Gabriel A.; Cauwenberghs, Gert

    2016-10-01

    Objective. Despite considerable advances in retinal prostheses over the last two decades, the resolution of restored vision has remained severely limited, well below the 20/200 acuity threshold of blindness. Towards drastic improvements in spatial resolution, we present a scalable architecture for retinal prostheses in which each stimulation electrode is directly activated by incident light and powered by a common voltage pulse transferred over a single wireless inductive link. Approach. The hybrid optical addressability and electronic powering scheme provides separate spatial and temporal control over stimulation, and further provides optoelectronic gain for substantially lower light intensity thresholds than other optically addressed retinal prostheses using passive microphotodiode arrays. The architecture permits the use of high-density electrode arrays with ultra-high photosensitive silicon nanowires, obviating the need for excessive wiring and high-throughput data telemetry. Instead, the single inductive link drives the entire array of electrodes through two wires and provides external control over waveform parameters for common voltage stimulation. Main results. A complete system comprising inductive telemetry link, stimulation pulse demodulator, charge-balancing series capacitor, and nanowire-based electrode device is integrated and validated ex vivo on rat retina tissue. Significance. Measurements demonstrate control over retinal neural activity both by light and electrical bias, validating the feasibility of the proposed architecture and its system components as an important first step towards a high-resolution optically addressed retinal prosthesis.

  5. 惯性微流体开关阈值特性与响应历程的数值仿真%Numerical Simulation on Threshold Characteristics and Response Process of Micro-fluidic Inertial Switch

    Institute of Scientific and Technical Information of China (English)

    蔺怡; 杨涛; 刘婷婷; 陈光焱; 王超

    2012-01-01

    根据变矩形截面微通道惯性微流体开关的结构和工作机理,建立了水银液滴在临界状态下的开关静态阈值模型.采用VOF模型,考虑了表面张力作用和接触角效应,模拟了水银液滴在微通道中的动态时间历程,较准确地反映了液滴形状连续变化中的关键特征.通过对水银液滴速度随时间变化的跟踪,验证了开关具有阈值特性.仿真分析了微阀门宽度、微通道深度等结构参数对加速度阈值的影响,从而验证了阈值解析公式.当接触角为130°至170°时,数值仿真结果显示开关的响应时间随着接触角的增大而减小.讨论了不同网格尺寸对开关动态过程仿真计算结果的影响,结果曲线表明在仿真设置条件下计算结果对网格尺寸依赖较小.%According to structure and mechanism of micro-fluidic inertial switch with varying rectangular cross-section , the static model of threshold g-value in critical state is established. Based on the VOF with containing surface tension and contact angle effects, the transient response process of mercury droplet in the microchannel is simulated using Fluent, which reflects the key feature of droplet deformation. By tracing the droplet velocity during the response time, threshold characteristics is illustrated by numerical simulation. The analytic equation is verified by simulating the influence of design parameters of microchannel on threshold g-value. The simulation analysis on the dynamic behavior of the switch shows that the response time decreases slightly with the increase of the contact angle when the contact angle is within the range of 130° ~ 170°. In addition, the dynamic process of inertial switch is simulated for three different grid sizes, and the result indicates that there is no significant variation in results as the grid resolution is changed.

  6. Micro-Fluidic Device for Drug Delivery

    Science.gov (United States)

    Beebe, David J. (Inventor); MacDonald, Michael J. (Inventor); Eddington, David T. (Inventor); Mensing, Glennys A. (Inventor)

    2014-01-01

    A microfluidic device is provided for delivering a drug to an individual. The microfluidic device includes a body that defines a reservoir for receiving the drug therein. A valve interconnects the reservoir to an output needle that is insertable into the skin of an individual. A pressure source urges the drug from the reservoir toward the needle. The valve is movable between a closed position preventing the flow of the drug from the reservoir to the output needle and an open position allowing for the flow of the drug from the reservoir to the output needle in response to a predetermined condition in the physiological fluids of the individual.

  7. A light writable microfluidic "flash memory": optically addressed actuator array with latched operation for microfluidic applications.

    Science.gov (United States)

    Hua, Zhishan; Pal, Rohit; Srivannavit, Onnop; Burns, Mark A; Gulari, Erdogan

    2008-03-01

    This paper presents a novel optically addressed microactuator array (microfluidic "flash memory") with latched operation. Analogous to the address-data bus mediated memory address protocol in electronics, the microactuator array consists of individual phase-change based actuators addressed by localized heating through focused light patterns (address bus), which can be provided by a modified projector or high power laser pointer. A common pressure manifold (data bus) for the entire array is used to generate large deflections of the phase change actuators in the molten phase. The use of phase change material as the working media enables latched operation of the actuator array. After the initial light "writing" during which the phase is temporarily changed to molten, the actuated status is self-maintained by the solid phase of the actuator without power and pressure inputs. The microfluidic flash memory can be re-configured by a new light illumination pattern and common pressure signal. The proposed approach can achieve actuation of arbitrary units in a large-scale array without the need for complex external equipment such as solenoid valves and electrical modules, which leads to significantly simplified system implementation and compact system size. The proposed work therefore provides a flexible, energy-efficient, and low cost multiplexing solution for microfluidic applications based on physical displacements. As an example, the use of the latched microactuator array as "normally closed" or "normally open" microvalves is demonstrated. The phase-change wax is fully encapsulated and thus immune from contamination issues in fluidic environments.

  8. All-optical differential detection for suppressing multiple-access interference in coherent time-addressed optical CDMA systems.

    Science.gov (United States)

    Kim, Sun-Jong; Kim, Tae-Young; Park, Chul; Park, Chang-Soo; Chun, Young

    2004-05-03

    A novel scheme for suppressing the multiple-access interference (MAI) in coherent time-addressed optical CDMA systems is proposed. This is based on a differential detection using the dual-control NOLM. The basic principle for MAI suppression is described. For experimental demonstration, two encoded channels are constructed and decoded. These decoded signals are sent to the dual-control NOLM and a high autocorrelation peak with suppressed MAI at the output of NOLM is observed. Signal-to-interference ratio is improved by 7 dB.

  9. Optical phase encryption by phase contrast using electrically addressed spatial light modulator

    Science.gov (United States)

    Nishchal, Naveen Kumar; Joseph, Joby; Singh, Kehar

    2003-03-01

    We report the use of an electrically addressed liquid crystal spatial light modulator (EALCSLM) operating in the phase mode as a phase-contrast filter (PCF). As an application, an optical phase encryption system has been implemented. We encrypt and decrypt a two-dimensional phase image obtained from an amplitude image. Encrypted image is holographically recorded in a Barium titanate crystal and is then decrypted by generating through phase conjugation, a conjugate of the encrypted image. The decrypted phase image is converted into an amplitude image using an EASLM as a PCF. The idea has been supported by the experimental results.

  10. Probing Matter-Field and Atom-Number Correlations in Optical Lattices by Global Nondestructive Addressing

    CERN Document Server

    Kozlowski, Wojciech; Mekhov, Igor B

    2014-01-01

    We show that light scattering from an ultracold gas reveals not only density correlations, but also matter-field interference at its shortest possible distance in an optical lattice, which defines key properties such as tunneling and matter-field phase gradients. This signal can be enhanced by concentrating probe light between lattice sites rather than at density maxima. As addressing between two single sites is challenging, we focus on global nondestructive scattering, allowing probing order parameters, matter-field quadratures and their squeezing. The scattering angular distribution displays peaks even if classical diffraction is forbidden and we derive generalized Bragg conditions. Light scattering distinguishes all phases in the Mott insulator - superfluid - Bose glass phase transition.

  11. In-line single-mode fiber variable optical attenuator based on electrically addressable microdroplets

    Science.gov (United States)

    Duduś, A.; Blue, R.; Zagnoni, M.; Stewart, G.; Uttamchandani, D.

    2014-07-01

    We report an in-line, fiber optic, broadband variable optical attenuator employing a side-polished, single-mode optical fiber integrated on a digital microfluidics platform. The system is designed to electrically translate a liquid droplet along the polished surface of an optical fiber using electrowetting forces. This fiber optic device has the advantage of no moving mechanical parts and lends itself to miniaturization. A maximum attenuation of 25 dB has been obtained in the wavelength range between 1520 nm and 1560 nm.

  12. KEYNOTE ADDRESS: The role of standards in the emerging optical digital data disk storage systems market

    Science.gov (United States)

    Bainbridge, Ross C.

    1984-09-01

    The Institute for Computer Sciences and Technology at the National Bureau of Standards is pleased to cooperate with the International Society for Optical Engineering and to join with the other distinguished organizations in cosponsoring this conference on applications of optical digital data disk storage systems.

  13. Addressable, large-field second harmonic generation microscopy based on 2D acousto-optical deflector and spatial light modulator.

    Science.gov (United States)

    Shao, Yonghong; Liu, Honghai; Qin, Wan; Qu, Junle; Peng, Xiang; Niu, Hanben; Gao, Bruce Z

    2012-09-01

    We present an addressable, large-field second harmonic generation microscope by combining a 2D acousto-optical deflector with a spatial light modulator. The SLM shapes an incoming mode-locked, near-infrared Ti:Sapphire laser beam into a multifocus array, which can be rapidly scanned by changing the incident angle of the laser beam using a 2D acousto-optical deflector. Compared to the single-beam-scan technique, the multifocus array scan can increase the scanning rate and the field-of-view size with the multi-region imaging ability.

  14. Multipoint-emitting optical fibers for spatially addressable in vivo optogenetics.

    Science.gov (United States)

    Pisanello, Ferruccio; Sileo, Leonardo; Oldenburg, Ian A; Pisanello, Marco; Martiradonna, Luigi; Assad, John A; Sabatini, Bernardo L; De Vittorio, Massimo

    2014-06-18

    Optical stimulation and silencing of neural activity is a powerful technique for elucidating the structure and function of neural circuitry. In most in vivo optogenetic experiments, light is delivered into the brain through a single optical fiber. However, this approach limits illumination to a fixed volume of the brain. Here a focused ion beam is used to pattern multiple light windows on a tapered optical fiber. We show that such fibers allow selective and dynamic illumination of different brain regions along the taper. Site selection is achieved by a simple coupling strategy at the fiber input, and the use of a single tapered waveguide minimizes the implant invasiveness. We demonstrate the effectiveness of this approach for multipoint optical stimulation in the mammalian brain in vivo by coupling the fiber to a microelectrode array and performing simultaneous extracellular recording and stimulation at multiple sites in the mouse striatum and cerebral cortex.

  15. Electrical dependencies of optical modulation capabilities in digitally addressed parallel aligned liquid crystal on silicon devices

    OpenAIRE

    Martínez Guardiola, Francisco Javier; Márquez Ruiz, Andrés; Gallego Rico, Sergi; Ortuño Sánchez, Manuel; Francés Monllor, Jorge; Beléndez Vázquez, Augusto; Pascual Villalobos, Inmaculada

    2014-01-01

    Parallel aligned liquid crystal on silicon (PA-LCoS) displays have found wide acceptance in applications requiring phase-only modulation. Among LCoS devices, and PA-LCoS as a specific case, digital addressing has become a very common technology. In principle, modern digital technology provides some benefits with respect to analog addressing such as reduced interpixel cross-talk, lower power consumption and supply voltage, gray level scale repeatability, high programmability, and noise robustn...

  16. Optically addressable nuclear spins in a solid with a six-hour coherence time

    Science.gov (United States)

    Zhong, Manjin; Hedges, Morgan P.; Ahlefeldt, Rose L.; Bartholomew, John G.; Beavan, Sarah E.; Wittig, Sven M.; Longdell, Jevon J.; Sellars, Matthew J.

    2015-01-01

    Space-like separation of entangled quantum states is a central concept in fundamental investigations of quantum mechanics and in quantum communication applications. Optical approaches are ubiquitous in the distribution of entanglement because entangled photons are easy to generate and transmit. However, extending this direct distribution beyond a range of a few hundred kilometres to a worldwide network is prohibited by losses associated with scattering, diffraction and absorption during transmission. A proposal to overcome this range limitation is the quantum repeater protocol, which involves the distribution of entangled pairs of optical modes among many quantum memories stationed along the transmission channel. To be effective, the memories must store the quantum information encoded on the optical modes for times that are long compared to the direct optical transmission time of the channel. Here we measure a decoherence rate of 8 × 10-5 per second over 100 milliseconds, which is the time required for light transmission on a global scale. The measurements were performed on a ground-state hyperfine transition of europium ion dopants in yttrium orthosilicate (151Eu3+:Y2SiO5) using optically detected nuclear magnetic resonance techniques. The observed decoherence rate is at least an order of magnitude lower than that of any other system suitable for an optical quantum memory. Furthermore, by employing dynamic decoupling, a coherence time of 370 +/- 60 minutes was achieved at 2 kelvin. It has been almost universally assumed that light is the best long-distance carrier for quantum information. However, the coherence time observed here is long enough that nuclear spins travelling at 9 kilometres per hour in a crystal would have a lower decoherence with distance than light in an optical fibre. This enables some very early approaches to entanglement distribution to be revisited, in particular those in which the spins are transported rather than the light.

  17. Computational chemistry modeling and design of photoswitchable alignment materials for optically addressable liquid crystal devices

    Science.gov (United States)

    Marshall, K. L.; Sekera, E. R.; Xiao, K.

    2015-09-01

    Photoalignment technology based on optically switchable "command surfaces" has been receiving increasing interest for liquid crystal optics and photonics device applications. Azobenzene compounds in the form of low-molar-mass, watersoluble salts deposited either directly on the substrate surface or after dispersion in a polymer binder have been almost exclusively employed for these applications, and ongoing research in the area follows a largely empirical materials design and development approach. Recent computational chemistry advances now afford unprecedented opportunities to develop predictive capabilities that will lead to new photoswitchable alignment layer materials with low switching energies, enhanced bistability, write/erase fatigue resistance, and high laser-damage thresholds. In the work described here, computational methods based on the density functional theory and time-dependent density functional theory were employed to study the impact of molecular structure on optical switching properties in photoswitchable methacrylate and acrylamide polymers functionalized with azobenzene and spiropyran pendants.

  18. A photo-driven dual-frequency addressable optical device of banana-shaped molecules

    Energy Technology Data Exchange (ETDEWEB)

    Krishna Prasad, S., E-mail: skpras@gmail.com; Lakshmi Madhuri, P.; Hiremath, Uma S.; Yelamaggad, C. V. [Centre for Soft Matter Research, Jalahalli, Bangalore 560 013 (India)

    2014-03-17

    We propose a photonic switch employing a blend of host banana-shaped liquid crystalline molecules and guest photoisomerizable calamitic molecules. The material exhibits a change in the sign of the dielectric anisotropy switching from positive to negative, at a certain crossover frequency of the probing field. The consequent change in electric torque can be used to alter the orientation of the molecules between surface-determined and field-driven optical states resulting in a large change in the optical transmission characteristics. Here, we demonstrate the realization of this feature by an unpolarized UV beam, the first of its kind for banana-shaped molecules. The underlying principle of photoisomerization eliminates the need for a second driving frequency. The device also acts as a reversible conductance switch with an order of magnitude increase of conductivity brought about by light. Possible usage of this for optically driven display devices and image storage applications is suggested.

  19. Addressing the needs of the telecoms industry for optical fibre communication in Africa

    Science.gov (United States)

    Leitch, Andrew W. R.; Conibear, Ann B.

    2005-10-01

    We report on a successful partnership between the Department of Physics at the Nelson Mandela Metropolitan University (NMMU) and Telkom, South Africa's national telecommunications company, to train physics students in the important fields related to optical fibre technology. The partnership, which began in 2001 and forms part of Telkom's Centre of Excellence program in South Africa, is currently being extended to other countries in Africa. The training being conducted in the Physics Department has as one of its main goals an increased understanding of polarisation mode dispersion (PMD), an effect that will ultimately limit the transmission speeds through optical fibre.

  20. Multiparticle Entanglement and Spatial Addressability of Ultracold Atoms in Optical Lattices

    Science.gov (United States)

    2009-02-01

    resolution imaging system will be located. • Magnetic trapping and evaporation We initially planned to realize a Bose - Einstein condensate in an... Bose Einstein Condensate in a hybrid trap consisting of the magnetic trap and a dipole trap. • Integration of the prepared optical lattice setup

  1. Low-power optically addressed spatial light modulators using MBE-grown III-V structures

    Science.gov (United States)

    Maserjian, Joseph L.; Larsson, Anders G.

    1991-12-01

    Device approaches are investigated for O-SLMs based on MBE engineered III-V materials and structures. Strong photo-optic effects can be achieved in periodically (delta) -doped multiple quantum well (MQW) structures. The doping-defined barriers serve to separate and delay recombination of the photo-generated electron-hole pairs. One can use this photo-effect to change the internal field across the MQWs giving rise to quantum-confined Stark shift. Alternately, the photo-generated electrons can be used to occupy the quantum wells, which in turn causes exciton quenching and a shift of the absorption edge. Recent work has shown that both of these predicted photo-optic effects can indeed be achieved in such MBE engineered structures. However, these enhanced effects are still insufficient for high contrast modulation with only single or double pass absorption through active layers of practical thickness. We use the asymmetric Fabry-Perot cavity approach which permits extinction of light due to interference of light reflected from the front and back surfaces of the cavity. Modulation of the absorption in the active cavity layers unbalances the cavity and 'turns on' the reflected output signal, thereby allowing large contrast ratios. This approach is realized with an all-MBE- grown structure consisting of a GaAs/AlAs quarter-wave stack reflector grown over the GaAs substrate as the high reflectance mirror (approximately equals 0.98) and the GaAs surface as the low reflectance mirror (approximately equals 0.3). We use for our active cavities InGaAs/GaAs MQWs separated by npn (delta) -doped GaAs barriers to achieve sensitive photo-optic effect due to exciton quenching. High contrast modulation (> 60:1) is achieved with the Fabry-Perot structures using low power (write signal.

  2. Optical signatures of molecular dissymmetry: combining theory with experiments to address stereochemical puzzles.

    Science.gov (United States)

    Mukhopadhyay, Parag; Wipf, Peter; Beratan, David N

    2009-06-16

    Modern chemistry emerged from the quest to describe the three-dimensional structure of molecules: van't Hoff's tetravalent carbon placed symmetry and dissymmetry at the heart of chemistry. In this Account, we explore how modern theory, synthesis, and spectroscopy can be used in concert to elucidate the symmetry and dissymmetry of molecules and their assemblies. Chiroptical spectroscopy, including optical rotatory dispersion (ORD), electronic circular dichroism (ECD), vibrational circular dichroism (VCD), and Raman optical activity (ROA), measures the response of dissymmetric structures to electromagnetic radiation. This response can in turn reveal the arrangement of atoms in space, but deciphering the molecular information encoded in chiroptical spectra requires an effective theoretical approach. Although important correlations between ECD and molecular stereochemistry have existed for some time, a battery of accurate new theoretical methods that link a much wider range of chiroptical spectroscopies to structure have emerged over the past decade. The promise of this field is considerable: theory and spectroscopy can assist in assigning the relative and absolute configurations of complex products, revealing the structure of noncovalent aggregates, defining metrics for molecular diversity based on polarization response, and designing chirally imprinted nanomaterials. The physical organic chemistry of chirality is fascinating in its own right: defining atomic and group contributions to optical rotation (OR) is now possible. Although the common expectation is that chiroptical response is determined solely by a chiral solute's electronic structure in a given environment, chiral imprinting effects on the surrounding medium and molecular assembly can, in fact, dominate the chiroptical signatures. The theoretical interpretation of chiroptical markers is challenging because the optical properties are subtle, resulting from the strong electric dipole and the weaker electric

  3. Engineered muscle systems having individually addressable distributed muscle actuators controlled by optical stimuli.

    Science.gov (United States)

    Neal, Devin; Asada, H Harry

    2013-01-01

    A multi degree-of-freedom system using live skeletal muscles as actuators is presented. Millimeter-scale, optically excitable 3D skeletal muscle strips are created by culturing genetically coded precursory muscle cells that are activated with light: optogenetics. These muscle bio-actuators are networked together to create a distributed actuator system. Unlike traditional mechanical systems where fixed axis joints are rotated with electric motors, the new networked muscle bio-actuators can activate loads having no fixed joint. These types of loads include shoulders, the mouth, and the jaw. The optogenetic approach offers high spatiotemporal resolution for precise control of muscle activation, and opens up the possibility to activate hundreds of interconnected muscles in a spatiotemporally coordinated manner. In this work, we explore the design of robotic systems composed of multiple light-activated live muscular actuator units. We describe and compare massively parallel and highly serial/networked distributions of these building-block actuator units. We have built functional fundamental prototypes and present experimental results to demonstrate the feasibility of the construction of larger scale muscle systems.

  4. Optically addressable single-use microfluidic valves by laser printer lithography.

    Science.gov (United States)

    Garcia-Cordero, Jose L; Kurzbuch, Dirk; Benito-Lopez, Fernando; Diamond, Dermot; Lee, Luke P; Ricco, Antonio J

    2010-10-21

    We report the design, fabrication, and characterization of practical microfluidic valves fabricated using laser printer lithography. These optofluidic valves are opened by directing optical energy from a solid-state laser, with similar power characteristics to those used in CD/DVD drives, to a spot of printed toner where localized heating melts an orifice in the polymer layer in as little as 500 ms, connecting previously isolated fluidic components or compartments. Valve functionality, response time, and laser input energy dependence of orifice size are reported for cyclo-olefin polymer (COP) and polyethylene terephthalate (PET) films. Implementation of these optofluidic valves is demonstrated on pressure-driven and centrifugal microfluidic platforms. In addition, these "one-shot" valves comprise a continuous polymer film that hermetically isolates on-chip fluid volumes within fluidic devices using low-vapor-permeability materials; we confirmed this for a period of one month. The fabrication and integration of optofluidic valves are compatible with a range of polymer microfabrication technologies and should facilitate the development of fully integrated, reconfigurable, and automated lab-on-a-chip systems, particularly when reagents must be stored on chip for extended periods, e.g. for medical diagnostic devices, lab-on-a-chip synthetic systems, or hazardous biochemical analysis platforms.

  5. Silicon Nitride Waveguides for Plasmon Optical Trapping and Sensing Applications

    CERN Document Server

    Zhao, Qiancheng; Huang, Yuewang; Capolino, Filippo; Boyraz, Ozdal

    2015-01-01

    We demonstrate a silicon nitride trench waveguide deposited with bowtie antennas for plasmonic enhanced optical trapping. The sub-micron silicon nitride trench waveguides were fabricated with conventional optical lithography in a low cost manner. The waveguides embrace not only low propagation loss and high nonlinearity, but also the inborn merits of combining micro-fluidic channel and waveguide together. Analyte contained in the trapezoidal trench channel can interact with the evanescent field from the waveguide beneath. The evanescent field can be further enhanced by plasmonic nanostructures. With the help of gold nano bowtie antennas, the studied waveguide shows outstanding trapping capability on 10 nm polystyrene nanoparticles. We show that the bowtie antennas can lead to 60-fold enhancement of electric field in the antenna gap. The optical trapping force on a nanoparticle is boosted by three orders of magnitude. A strong tendency shows the nanoparticle is likely to move to the high field strength region,...

  6. Molecular beam epitaxy engineered III-V semiconductor structures for low-power optically addressed spatial light modulators

    Science.gov (United States)

    Larsson, Anders G.; Maserjian, Joseph

    1992-01-01

    Device approaches are investigated for optically addressed SLMs based on molecular-beam epitaxy (MBE) engineered III-V materials and structures. Strong photooptic effects can be achieved in periodically delta-doped multiple-quantum-well structures, but are still insufficient for high-contrast modulation with only single- or double-pass absorption through active layers of practical thickness. The asymmetric Fabry-Perot cavity approach is employed to permit extinction of light due to interference of light reflected from the front and back surfaces of the cavity. This approach is realized with an all-MBE-grown structure consisting of GaAs/AlAs quarter-wave stack reflector grown over the GaAs substrate as the high reflectance mirror and the GaAs surface as the low reflectance mirror. High-contrast modulation is achieved using a low-power InGaAs/GaAs quantum well laser for the control signal.

  7. Electrically actuatable doped polymer flakes and electrically addressable optical devices using suspensions of doped polymer flakes in a fluid host

    Science.gov (United States)

    Trajkovska-Petkoska, Anka; Jacobs, Stephen D.; Marshall, Kenneth L.; Kosc, Tanya Z.

    2010-05-11

    Doped electrically actuatable (electrically addressable or switchable) polymer flakes have enhanced and controllable electric field induced motion by virtue of doping a polymer material that functions as the base flake matrix with either a distribution of insoluble dopant particles or a dopant material that is completely soluble in the base flake matrix. The base flake matrix may be a polymer liquid crystal material, and the dopants generally have higher dielectric permittivity and/or conductivity than the electrically actuatable polymer base flake matrix. The dopant distribution within the base flake matrix may be either homogeneous or non-homogeneous. In the latter case, the non-homogeneous distribution of dopant provides a dielectric permittivity and/or conductivity gradient within the body of the flakes. The dopant can also be a carbon-containing material (either soluble or insoluble in the base flake matrix) that absorbs light so as to reduce the unpolarized scattered light component reflected from the flakes, thereby enhancing the effective intensity of circularly polarized light reflected from the flakes when the flakes are oriented into a light reflecting state. Electro-optic devices contain these doped flakes suspended in a host fluid can be addressed with an applied electric field, thus controlling the orientation of the flakes between a bright reflecting state and a non-reflecting dark state.

  8. Temperature characterization of integrated optical all-polymer Mach-Zehnder interferometers

    Science.gov (United States)

    Xiao, Yanfen; Hofmann, Meike; Wang, Ziyu; Langenecker, Alexa; Shermann, Stanislav; Gleissner, Uwe; Zappe, Hans

    2016-04-01

    Two new design concepts for all-polymer-based integrated optical Mach-Zehnder interferometers in foil as chemical or bio-chemical sensors are presented. Fabricated with hot-embossing and printing techniques, these all polymer optical components are designed for low-cost fabrication and yield highly sensitive response to external refractive index changes. Compared to traditional semiconductor based systems, these polymer sensors do not need the interaction window and do not require a cleanroom for fabrication. The optical response of the asymmetric interferometers to temperature variations is determined theoretically and compared for two designs. Using the designed asymmetric interferometer, a chemical micro-fluidic test system with temperature controller experimentally demonstrates the sensors' temperature characteristics.

  9. Numerical Modeling of Micro Fluidics of Polymer Melts

    DEFF Research Database (Denmark)

    Marin, José Manuel Román; Rasmussen, Henrik K.

    2008-01-01

    film on a hard substrate. The numerical method is based on a Lagrangian kinematics description of the fluid, where the (Cartesian) coordinate system attached to the particles is discretized by ten-node quadratic tetrahedral elements. The time integral in the K-BKZ model is discretized by a quadratic......A new Galerkin finite element scheme for the numerical simulation of three-dimensional time-dependent flow of K-BKZ fluids has been developed. The scheme was used to model the polymer melt flow in nano imprint lithography (NIL). In NIL a sub micrometer pattern is hot pressed onto a thin polymer...

  10. Topology optimization of flexible micro-fluidic devices

    DEFF Research Database (Denmark)

    Kreissl, Sebastian; Pingen, Georg; Evgrafov, Anton

    2010-01-01

    in the undeformed and deformed configurations. The layout of fluid channels is determined by material topology optimization. In addition, the thickness distribution, the distribution of active material for internal actuation, and the support conditions are optimized. The coupled fluid-structure response...... and fluid mesh. The governing and the adjoint equations of the resulting fluid-structure interaction problem are derived. The proposed method is illustrated with the design of tunable manifolds....

  11. Topology optimization of flexible micro-fluidic devices

    DEFF Research Database (Denmark)

    Kreissl, Sebastian; Pingen, Georg; Evgrafov, Anton;

    2010-01-01

    A multi-objective topology optimization formulation for the design of dynamically tunable fluidic devices is presented. The flow is manipulated via external and internal mechanical actuation, leading to elastic deformations of flow channels. The design objectives characterize the performance...

  12. Numerical Modeling of Flow Distribution in Micro-Fluidics Systems

    Science.gov (United States)

    Majumdar, Alok; Cole, Helen; Chen, C. P.

    2005-01-01

    This paper describes an application of a general purpose computer program, GFSSP (Generalized Fluid System Simulation Program) for calculating flow distribution in a network of micro-channels. GFSSP employs a finite volume formulation of mass and momentum conservation equations in a network consisting of nodes and branches. Mass conservation equation is solved for pressures at the nodes while the momentum conservation equation is solved at the branches to calculate flowrate. The system of equations describing the fluid network is solved by a numerical method that is a combination of the Newton-Raphson and successive substitution methods. The numerical results have been compared with test data and detailed CFD (computational Fluid Dynamics) calculations. The agreement between test data and predictions is satisfactory. The discrepancies between the predictions and test data can be attributed to the frictional correlation which does not include the effect of surface tension or electro-kinetic effect.

  13. Infrared to visible image up-conversion using optically addressed spatial light modulator utilizing liquid crystal and InGaAs photodiodes

    Energy Technology Data Exchange (ETDEWEB)

    Solodar, A., E-mail: asisolodar@gmail.com; Arun Kumar, T.; Sarusi, G.; Abdulhalim, I. [Department of Electro-Optics Engineering and The Ilse Katz Institute for Nanoscale Science and Technology, Ben Gurion University of the Negev, Beer Sheva 84105 (Israel)

    2016-01-11

    Combination of InGaAs/InP heterojunction photodetector with nematic liquid crystal (LC) as the electro-optic modulating material for optically addressed spatial light modulator for short wavelength infra-red (SWIR) to visible light image conversion was designed, fabricated, and tested. The photodetector layer is composed of 640 × 512 photodiodes array based on heterojunction InP/InGaAs having 15 μm pitch on InP substrate and with backside illumination architecture. The photodiodes exhibit extremely low, dark current at room temperature, with optimum photo-response in the SWIR region. The photocurrent generated in the heterojunction, due to the SWIR photons absorption, is drifted to the surface of the InP, thus modulating the electric field distribution which modifies the orientation of the LC molecules. This device can be attractive for SWIR to visible image upconversion, such as for uncooled night vision goggles under low ambient light conditions.

  14. Optically Addressable Silicon Vacancy-Related Spin Centers in Rhombic Silicon Carbide with High Breakdown Characteristics and ENDOR Evidence of Their Structure.

    Science.gov (United States)

    Soltamov, V A; Yavkin, B V; Tolmachev, D O; Babunts, R A; Badalyan, A G; Davydov, V Yu; Mokhov, E N; Proskuryakov, I I; Orlinskii, S B; Baranov, P G

    2015-12-11

    We discovered a family of uniaxially oriented silicon vacancy-related centers with S=3/2 in a rhombic 15R-SiC crystalline matrix. We demonstrate that these centers exhibit unique characteristics such as optical spin alignment up to the temperatures of 250°C. Thus, the range of robust optically addressable vacancy-related spin centers is extended to the wide class of rhombic SiC polytypes. To use these centers for quantum applications it is essential to know their structure. Using high frequency electron nuclear double resonance, we show that the centers are formed by negatively charged silicon vacancies V_{Si}^{-} in the paramagnetic state with S=3/2 that is noncovalently bonded to the neutral carbon vacancy V_{C}^{0} in the nonparamagnetic state, located on the adjacent site along the SiC symmetry c axis.

  15. Doppler-free, multiwavelength acousto-optic deflector for two-photon addressing arrays of Rb atoms in a quantum information processor.

    Science.gov (United States)

    Kim, Sangtaek; Mcleod, Robert R; Saffman, M; Wagner, Kelvin H

    2008-04-10

    We demonstrate a dual wavelength acousto-optic deflector (AOD) designed to deflect two wavelengths to the same angles by driving with two RF frequencies. The AOD is designed as a beam scanner to address two-photon transitions in a two-dimensional array of trapped neutral Rb87 atoms in a quantum computer. Momentum space is used to design AODs that have the same diffraction angles for two wavelengths (780 and 480 nm) and have nonoverlapping Bragg-matched frequency response at these wavelengths, so that there will be no cross talk when proportional frequencies are applied to diffract the two wavelengths. The appropriate crystal orientation, crystal shape, transducer size, and transducer height are determined for an AOD made with a tellurium dioxide crystal (TeO(2)). The designed and fabricated AOD has more than 100 resolvable spots, widely separated band shapes for the two wavelengths within an overall octave bandwidth, spatially overlapping diffraction angles for both wavelengths (780 and 480 nm), and a 4 micros or less access time. Cascaded AODs in which the first device upshifts and the second downshifts allow Doppler-free scanning as required for addressing the narrow atomic resonance without detuning. We experimentally show the diffraction-limited Doppler-free scanning performance and spatial resolution of the designed AOD.

  16. Welcome Address

    OpenAIRE

    Shantanu Sengupta

    1983-01-01

    This article is part of the NEDA-PIDS Seminar-Workshop on the Philippine System of National Accounts. It outlines the seminar’s major objectives and the problems and issues that need to be addressed. It argues that coordination among institutions can lead to effective resolution to sensitive issues.

  17. Tight control of light trapping in surface addressable photonic crystal membranes: application to spectrally and spatially selective optical devices (Conference Presentation)

    Science.gov (United States)

    Letartre, Xavier; Blanchard, Cédric; Grillet, Christian; Jamois, Cécile; Leclercq, Jean-Louis; Viktorovitch, Pierre

    2016-04-01

    Surface addressable Photonic Crystal Membranes (PCM) are 1D or 2D photonic crystals formed in a slab waveguides where Bloch modes located above the light line are exploited. These modes are responsible for resonances in the reflection spectrum whose bandwidth can be adjusted at will. These resonances result from the coupling between a guided mode of the membrane and a free-space mode through the pattern of the photonic crystal. If broadband, these structures represent an ideal mirror to form compact vertical microcavity with 3D confinement of photons and polarization selectivity. Among numerous devices, low threshold VCSELs with remarkable and tunable modal properties have been demonstrated. Narrow band PCMs (or high Q resonators) have also been extensively used for surface addressable optoelectronic devices where an active material is embedded into the membrane, leading to the demonstration of low threshold surface emitting lasers, nonlinear bistables, optical traps... In this presentation, we will describe the main physical rules which govern the lifetime of photons in these resonant modes. More specifically, it will be emphasized that the Q factor of the PCM is determined, to the first order, by the integral overlap between the electromagnetic field distributions of the guided and free space modes and of the dielectric periodic perturbation which is applied to the homogeneous membrane to get the photonic crystal. It turns out that the symmetries of these distributions are of prime importance for the strength of the resonance. It will be shown that, by molding in-plane or vertical symmetries of Bloch modes, spectrally and spatially selective light absorbers or emitters can be designed. First proof of concept devices will be also presented.

  18. Welcome Address

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    @@  On behalf of the International Life Sciences Institute, I welcome you to Beijing and to the Third Asian Conference on Food Safety and Nutrition. Many of you will remember the first Asian conference on Food Safety held in Kuala Lumpur in 1990 and the second held in Bangkok in 1994. These meetings have been so successful that ILSI made the commitment to host such a conference periodically in order to provide a forum to share the latest information and to set new goals and priorities.   This year, we have broadened the scope of the agenda to include issues on nutrition. I want to thank all of our co-sponsors and members of the Planning Committee for preparing such a comprehensive and timely program. Some of the issues and challenges facing Asia that will be addressed at this meeting are:

  19. Large-area super-resolution optical imaging by using core-shell microfibers

    Science.gov (United States)

    Liu, Cheng-Yang; Lo, Wei-Chieh

    2017-09-01

    We first numerically and experimentally report large-area super-resolution optical imaging achieved by using core-shell microfibers. The particular spatial electromagnetic waves for different core-shell microfibers are studied by using finite-difference time-domain and ray tracing calculations. The focusing properties of photonic nanojets are evaluated in terms of intensity profile and full width at half-maximum along propagation and transversal directions. In experiment, the general optical fiber is chemically etched down to 6 μm diameter and coated with different metallic thin films by using glancing angle deposition. The direct imaging of photonic nanojets for different core-shell microfibers is performed with a scanning optical microscope system. We show that the intensity distribution of a photonic nanojet is highly related to the metallic shell due to the surface plasmon polaritons. Furthermore, large-area super-resolution optical imaging is performed by using different core-shell microfibers placed over the nano-scale grating with 150 nm line width. The core-shell microfiber-assisted imaging is achieved with super-resolution and hundreds of times the field-of-view in contrast to microspheres. The possible applications of these core-shell optical microfibers include real-time large-area micro-fluidics and nano-structure inspections.

  20. Inaugural address

    Science.gov (United States)

    Joshi, P. S.

    2014-03-01

    From jets to cosmos to cosmic censorship P S Joshi Tata Institute of Fundamental Research, Homi Bhabha Road, Colaba, Mumbai 400005, India E-mail: psj@tifr.res.in 1. Introduction At the outset, I should like to acknowledge that part of the title above, which tries to capture the main flavour of this meeting, and has been borrowed from one of the plenary talks at the conference. When we set out to make the programme for the conference, we thought of beginning with observations on the Universe, but then we certainly wanted to go further and address deeper questions, which were at the very foundations of our inquiry, and understanding on the nature and structure of the Universe. I believe, we succeeded to a good extent, and it is all here for you in the form of these Conference Proceedings, which have been aptly titled as 'Vishwa Mimansa', which could be possibly translated as 'Analysis of the Universe'! It is my great pleasure and privilege to welcome you all to the ICGC-2011 meeting at Goa. The International Conference on Gravitation and Cosmology (ICGC) series of meetings are being organized by the Indian Association for General Relativity and Gravitation (IAGRG), and the first such meeting was planned and conducted in Goa in 1987, with subsequent meetings taking place at a duration of about four years at various locations in India. So, it was thought appropriate to return to Goa to celebrate the 25 years of the ICGC meetings. The recollections from that first meeting have been recorded elsewhere here in these Proceedings. The research and teaching on gravitation and cosmology was initiated quite early in India, by V V Narlikar at the Banares Hindu University, and by N R Sen in Kolkata in the 1930s. In course of time, this activity grew and gained momentum, and in early 1969, at the felicitation held for the 60 years of V V Narlikar at a conference in Ahmedabad, P C Vaidya proposed the formation of the IAGRG society, with V V Narlikar being the first President. This

  1. Opening Address

    Science.gov (United States)

    Crovini, L.

    1994-01-01

    Ladies and Gentlemen To quote Mr Jean Terrien: "Physics must be one step ahead of metrology". A long-serving Director of the BIPM, he said these words when visiting the IMGC in 1970 as a member of the scientific board of our Institute. At that time it was still an open question whether the IMGC should start research work on the absolute measurement of silicon lattice spacing. Mr Terrien underlined the revolutionary character of x-ray interferometry and, eventually, he caused the balance needle to lean towards the ... right direction. Mr Terrien correctly foresaw that, like Michelson's interferometer of 1880, x-ray interferometry could have a prominent place in today's science and technology. And while, in the first case, after more than a century we can see instruments based on electromagnetic wave interaction within every one's reach in laboratories and, sometimes, in workshops, in the second case, twenty-five years since the first development of an x-ray interferometer we can witness its role in nanometrology. Today and tomorrow we meet to discuss how to go beyond the sixth decimal place in the value of the Avogadro constant. We are aware that the quest for this achievement requires the cooperation of scientists with complementary capabilities. I am sure that the present workshop is a very good opportunity to present and discuss results and to improve and extend existing cooperation. The new adjustment of fundamental constants envisaged by the CODATA Task Group is redoubling scientists' efforts to produce competitive values of NA. The results of the measurements of the silicon lattice spacing in terms of an optical wavelength, which were available for the 1986 adjustment, combined with the determination of silicon molar volume, demonstrate how such an NA determination produces a consistent set of other constants and opens the way to a possible redefinition of the kilogram. We shall see in these two days how far we have progressed along this road. For us at the

  2. Laser-assisted modification of polymers for microfluidic, micro-optics, and cell culture applications

    Science.gov (United States)

    Pfleging, W.; Adamietz, R.; Brückner, H. J.; Bruns, M.; Welle, A.

    2007-02-01

    Laser-assisted patterning of polymers is investigated for the direct fabrication of polymeric lab-on-a-chip devices in microsystem technology for capillary electrophoresis chips in bio-analytical applications. In many cases the laser process induces a chemical, physical and topographical change in the laser treated surface. This material modification significantly influences the lab-on-a-chip-functionalities. We will present our current research results in laser-assisted modification of polystyrene (PS) and polymethylmethacrylate (PMMA) with respect to applications in micro-optics, micro-fluidics and cell culture applications. For this purpose the refractive index change, the wettability and the adsorption of proteins and the adhesion of animal cells were investigated as function of laser- and processing parameters. The possible change of surface chemistry was characterized by X-ray photoelectron spectroscopy. The local UV-laser-assisted formation of chemical structures suitable for improved cell adhesion was realized on two- and three-dimensional PS and polycarbonate (PC) surfaces. Above and below the laser ablation threshold two different mechanisms were detected. In one case the produced debris was responsible for improved cell adhesion, while in the other case a photolytical activation of the polymer surface including a subsequent oxidization in oxygen or ambient air leads to a highly localized alteration of protein adsorption from cell culture media and increased cell adhesion. The highly localized control of wettability on polymeric surfaces was investigated for PS and PMMA. In the case of PS the dynamic advancing contact angle could be adjusted between 2° and 150°. This was possible for a suitable exposure dose and an appropriate choice of processing gas (helium or oxygen). A similar but not so significant effect was observed for PMMA below the laser ablation threshold. For PMMA the dynamic advancing contact angle could be adjusted between nearly 50° and

  3. Presidential address.

    Science.gov (United States)

    Vohra, U

    1993-07-01

    The Secretary of India's Ministry of Health and Family Welfare serves as Chair of the Executive Council of the International Institute for Population Sciences in Bombay. She addressed its 35th convocation in 1993. Global population stands at 5.43 billion and increases by about 90 million people each year. 84 million of these new people are born in developing countries. India contributes 17 million new people annually. The annual population growth rate in India is about 2%. Its population size will probably surpass 1 billion by the 2000. High population growth rates are a leading obstacle to socioeconomic development in developing countries. Governments of many developing countries recognize this problem and have expanded their family planning programs to stabilize population growth. Asian countries that have done so and have completed the fertility transition include China, Japan, Singapore, South Korea, and Thailand. Burma, Malaysia, North Korea, Sri Lanka, and Vietnam have not yet completed the transition. Afghanistan, Bangladesh, Iran, Nepal, and Pakistan are half-way through the transition. High population growth rates put pressure on land by fragmenting finite land resources, increasing the number of landless laborers and unemployment, and by causing considerable rural-urban migration. All these factors bring about social stress and burden civic services. India has reduced its total fertility rate from 5.2 to 3.9 between 1971 and 1991. Some Indian states have already achieved replacement fertility. Considerable disparity in socioeconomic development exists among states and districts. For example, the states of Bihar, Madhya Pradesh, Rajasthan, and Uttar Pradesh have female literacy rates lower than 27%, while that for Kerala is 87%. Overall, infant mortality has fallen from 110 to 80 between 1981 and 1990. In Uttar Pradesh, it has fallen from 150 to 98, while it is at 17 in Kerala. India needs innovative approaches to increase contraceptive prevalence rates

  4. Welcome Address

    Science.gov (United States)

    Kiku, H.

    2014-12-01

    Ladies and Gentlemen, It is an honor for me to present my welcome address in the 3rd International Workshop on "State of the Art in Nuclear Cluster Physics"(SOTANCP3), as the president of Kanto Gakuin University. Particularly to those from abroad more than 17 countries, I am very grateful for your participation after long long trips from your home to Yokohama. On the behalf of the Kanto Gakuin University, we certainly welcome your visit to our university and stay in Yokohama. First I would like to introduce Kanto Gakuin University briefly. Kanto Gakuin University, which is called KGU, traces its roots back to the Yokohama Baptist Seminary founded in 1884 in Yamate, Yokohama. The seminary's founder was Albert Arnold Bennett, alumnus of Brown University, who came to Japan from the United States to establish a theological seminary for cultivating and training Japanese missionaries. Now KGU is a major member of the Kanto Gakuin School Corporation, which is composed of two kindergartens, two primary schools, two junior high schools, two senior high schools as well as KGU. In this university, we have eight faculties with graduate school including Humanities, Economics, Law, Sciences and Engineering, Architecture and Environmental Design, Human and Environmental Studies, Nursing, and Law School. Over eleven thousands students are currently learning in our university. By the way, my major is the geotechnical engineering, and I belong to the faculty of Sciences and Engineering in my university. Prof. T. Yamada, here, is my colleague in the same faculty. I know that the nuclear physics is one of the most active academic fields in the world. In fact, about half of the participants, namely, more than 50 scientists, come from abroad in this conference. Moreover, I know that the nuclear physics is related to not only the other fundamental physics such as the elementary particle physics and astrophysics but also chemistry, medical sciences, medical cares, and radiation metrology

  5. Optics

    CERN Document Server

    Fincham, W H A

    2013-01-01

    Optics: Ninth Edition Optics: Ninth Edition covers the work necessary for the specialization in such subjects as ophthalmic optics, optical instruments and lens design. The text includes topics such as the propagation and behavior of light; reflection and refraction - their laws and how different media affect them; lenses - thick and thin, cylindrical and subcylindrical; photometry; dispersion and color; interference; and polarization. Also included are topics such as diffraction and holography; the limitation of beams in optical systems and its effects; and lens systems. The book is recommen

  6. Bio-Fluid Transport Models Through Nano and Micro-Fluidic Components

    Science.gov (United States)

    2005-08-01

    D. L. Chapman, Phil. Mag. 25, 475 (1913) 13 Figure 7 Velocity profile in plane Couette flow obtained for three layers (yellow, pink and green...technique and a wall shear stress sensor with superior spatial resolution will be further evaluated using experimental measurements in Poiseuille flow ...Seattle, WA (2004) [22] M. Yoda and R. Sadr, “Near-wall Velocity Measurements in Poiseuille Flow : Effect of Shear,” 57th Annual Meeting of the

  7. Bio-Inspired Micro-Fluidic Angular-Rate Sensor for Vestibular Prostheses

    Directory of Open Access Journals (Sweden)

    Charalambos M. Andreou

    2014-07-01

    Full Text Available This paper presents an alternative approach for angular-rate sensing based on the way that the natural vestibular semicircular canals operate, whereby the inertial mass of a fluid is used to deform a sensing structure upon rotation. The presented gyro has been fabricated in a commercially available MEMS process, which allows for microfluidic channels to be implemented in etched glass layers, which sandwich a bulk-micromachined silicon substrate, containing the sensing structures. Measured results obtained from a proof-of-concept device indicate an angular rate sensitivity of less than 1 °/s, which is similar to that of the natural vestibular system. By avoiding the use of a continually-excited vibrating mass, as is practiced in today’s state-of-the-art gyroscopes, an ultra-low power consumption of 300 μW is obtained, thus making it suitable for implantation.

  8. Design and testing of micro fluidic chemical analysis chip integrated with micro valveless pump

    Institute of Scientific and Technical Information of China (English)

    FU; Xin; XIE; Haibo; YANG; Huayong; JIA; Zhijian; FANG; Qun

    2005-01-01

    A new structure and working principle of the chip integrated with micro valveless pump for capillary electrophoresis was proposed in this paper. The micro valveless pump with plane structure has advantages of simple structure, and the process technology is compatible with existing micro chips for capillary electrophoresis. Based upon the mathematical model, simulation study of micro pump was carried out to investigate the influence of structural parameters on flow characteristics, and the performance of the integrated micro pump was also tested with different control parameters. The simulation results agree with the experimental results. Three samples, which are amino acid, fluorescein and buffer solution, have been examined with this chip. The results of the primary experiments showed that the micro valveless pump was promising in the integration and automatization of miniature integrated fluidic systems.

  9. The butterfly proboscis as a fiber-based, self-cleaning, micro-fluidic system

    Science.gov (United States)

    Kornev, Kostantin G.; Monaenkova, Daria; Adler, Peter H.; Beard, Charles E.; Lee, Wah-Keat

    2016-04-01

    The butterfly proboscis is a unique, naturally engineered device for acquiring liquid food, which also minimizes concerns for viscosity and stickiness of the fluids. With a few examples, we emphasize the importance of the scale-form functionality triangle of this feeding device and the coupling through capillarity.

  10. Biological Cell Identification by Integrating Micro-Fluidics, Electrical Impedance Spectroscopy and Stochastic Estimation

    Science.gov (United States)

    2007-03-01

    2-10 2.3.1 Linear Systems Theory Overview . . . . . . . . . . . . 2-10 vi Page 2.3.2 Cell Electrical Response as a...the system to the system output. Linear systems theory deals with the fundamentals of dynamic systems and provides the mathematical framework to model...input and output relationships based on di¤erential equations that describe system dynamics. Linear systems theory coupled with stochastic estimation

  11. Micro fluidic System for Culturing and Monitoring of Neuronal Cells and Tissue

    DEFF Research Database (Denmark)

    Bakmand, Tanya; Waagepetersen, Helle S.

    . Tests show that the function of neurons cultured on PNWs lies closer to neurons in vivo than neurons cultured on conventional plastic substrates. The second part of the thesis describes a fluidic system for culturing of brain slices. It describes the fabrication and use of the system as well as results...... for culturing of brain tissue. The second goal was to develop a sensor system with the potential for incorporation into both conventional culture systems and fluidic culturing systems. The third and final goal of this project was to develop a system for culturing of neuronal cells with the possibility...... neuronal cells on a Peptide Nano Wires (PNW) modified substrate aiming to bring conventional neuronal cultures closer to mimic the in vivo situation. The work describes both the fabrication of the culture substrates and results comparing the performance of PNWcultured neurons and conventional cultures...

  12. Micro-fluidic partitioning between polymeric sheets for chemical amplification and processing

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, Brian L.

    2017-01-24

    A system for fluid partitioning for chemical amplification or other chemical processing or separations of a sample, comprising a first dispenser of a first polymeric sheet, wherein the first polymeric sheet contains chambers; a second dispenser of a second polymeric sheet wherein the first dispenser and the second dispenser are positioned so that the first polymeric sheet and the second polymeric sheet become parallel; a dispenser of the fluid positioned to dispense the fluid between the first polymeric sheet and the second polymeric sheet; and a seal unit that seals the first polymeric sheet and the second polymeric sheet together thereby sealing the sample between the first polymeric sheet and the second polymeric sheet and partitioning the fluid for chemical amplification or other chemical processing or separations.

  13. Open Tubular Microreactor with Enzyme Functionalized Micro- fluidic Channel for Amperometric Detection of Glucose

    Institute of Scientific and Technical Information of China (English)

    张蕾; 曲平; 盛金; 雷建平; 鞠烷先

    2012-01-01

    A simple and efficient method using enzyme immobilized microfluidic channel as open tubular microreactor was designed for amperometric detection of glucose. The microreactor was composed of a polydimethylsilicone/ glass hybrid device with three reservoirs, a cooling cave and a 6 cm capillary with a sampling fracture as micro-channel. The microchannel was further modified by thermal polymerization, followed by covalently attaching with glucose oxidase. Through fracture sampling and electrochromatography separation, the production via enzymatic reaction was determinated by Pt electrode at the end of capillary. The linear range for the detection of glucose was 0.05--7.5 mmol·L-1 with detection limit of 23μmol.L-1 The inter-and intra-chip reproducibilities for determination of 2.5 mmol-L-1 glucose were 98.5% (n=5) and 96.0% (n=5), respectively. With the advantage of flexible assembly, rapid efficiency, good stability and low-cost, this microreactor provided a potential platform for estab- lishing a portable enzyme-based chemical detection system in practical application.

  14. Novel design of a refractive index sensor based on a dual-core micro-structured optical fiber

    CERN Document Server

    Tsigaridas, G; Persephonis, P

    2014-01-01

    In the present work a new model of a refractive index (RI) sensor is exhibited. This is based on a dual core micro-structured optical fiber (MOF), where two holes are introduced at the core centers. In this way, the model enhances the interaction of the fiber modes propagated in the core region, providing the possibility of increasing the dimensions of the fiber sensor. Thus, the filling of the fiber holes with the fluid under study is facilitated, and generally the practical use of the system as a refractive index sensor is simplified. The influence of the core separation and the diameter of the central holes on the sensitivity of the sensor have been studied by a numerical simulation. The results are in agreement with the expected behavior as it is determined by the physics of the problem. Based on the same operating principle, it is verified that a dual-core conventional optical fiber with micro-fluidic channels at the center of the cores, can also operates as an RI sensor.

  15. Optics

    CERN Document Server

    Fincham, W H A

    2013-01-01

    Optics: Eighth Edition covers the work necessary for the specialization in such subjects as ophthalmic optics, optical instruments and lens design. The text includes topics such as the propagation and behavior of light; reflection and refraction - their laws and how different media affect them; lenses - thick and thin, cylindrical and subcylindrical; photometry; dispersion and color; interference; and polarization. Also included are topics such as diffraction and holography; the limitation of beams in optical systems and its effects; and lens systems. The book is recommended for engineering st

  16. Allegheny County Address Points

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — This dataset contains address points which represent physical address locations assigned by the Allegheny County addressing authority. Data is updated by County...

  17. Allegheny County Address Points

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — This dataset contains address points which represent physical address locations assigned by the Allegheny County addressing authority. Data is updated by County...

  18. A Novel Approach for TNA Address Management

    Institute of Scientific and Technical Information of China (English)

    Xiaodong Wang; Yaohui Jin; Weishen Hu; Shenli Zhu

    2003-01-01

    We present a new scheme to allocate/de- allocate Transport Network Assigned (TNA) address using Link ManagementProtocol (LMP) and to register/resolution these addresses using Lightweight Directory Access Protocol (LDAP) forAutomatically Switched Optical Network (ASON).

  19. Reach Address Database (RAD)

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Reach Address Database (RAD) stores the reach address of each Water Program feature that has been linked to the underlying surface water features (streams,...

  20. License Address List

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Address list generated from National Saltwater Angler Registry. Used in conjunction with an address-based sample as per survey design.

  1. Optical processing

    Science.gov (United States)

    Gustafson, S. C.

    1985-12-01

    The technical contributions were as follows: (1) Optical parallel 2-D neighborhood processor and optical processor assessment technique; (2) High accuracy with moderately accurate components and optical fredkin gate architectures; (3) Integrated optical threshold computing, pipelined polynomial processor, and all optical analog/digital converter; (4) Adaptive optical associative memory model with attention; (5) Effectiveness of parallelism and connectivity in optical computers; (6) Optical systolic array processing using an integrated acoustooptic module; (7) Optical threshold elements and networks, holographic threshold processors, adaptive matched spatial filtering, and coherence theory in optical computing; (8) Time-varying optical processing for sub-pixel targets, optical Kalman filtering, and adaptive matched filtering; (9) Optical degrees of freedom, ultra short optical pulses, number representations, content-addressable-memory processors, and integrated optical Givens rotation devices; (10) Optical J-K flip flop analysis and interfacing for optical computers; (11) Matrix multiplication algorithms and limits of incoherent optical computers; (12) Architecture for machine vision with sensor fusion, pattern recognition functions, and neural net implementations; (13) Optical computing algorithms, architectures, and components; and (14) Dynamic optical interconnections, advantages and architectures.

  2. Addressing Ozone Layer Depletion

    Science.gov (United States)

    Access information on EPA's efforts to address ozone layer depletion through regulations, collaborations with stakeholders, international treaties, partnerships with the private sector, and enforcement actions under Title VI of the Clean Air Act.

  3. Addressivity in cogenerative dialogues

    Science.gov (United States)

    Hsu, Pei-Ling

    2014-03-01

    Ashraf Shady's paper provides a first-hand reflection on how a foreign teacher used cogens as culturally adaptive pedagogy to address cultural misalignments with students. In this paper, Shady drew on several cogen sessions to showcase his journey of using different forms of cogens with his students. To improve the quality of cogens, one strategy he used was to adjust the number of participants in cogens. As a result, some cogens worked and others did not. During the course of reading his paper, I was impressed by his creative and flexible use of cogens and at the same time was intrigued by the question of why some cogens work and not others. In searching for an answer, I found that Mikhail Bakhtin's dialogism, especially the concept of addressivity, provides a comprehensive framework to address this question. In this commentary, I reanalyze the cogen episodes described in Shady's paper in the light of dialogism. My analysis suggests that addressivity plays an important role in mediating the success of cogens. Cogens with high addressivity function as internally persuasive discourse that allows diverse consciousnesses to coexist and so likely affords productive dialogues. The implications of addressivity in teaching and learning are further discussed.

  4. An optical sensing approach for the noninvasive transdermal monitoring of cortisol

    Science.gov (United States)

    Hwang, Yongsoon; Gupta, Niraj K.; Ojha, Yagya R.; Cameron, Brent D.

    2016-03-01

    Cortisol, a biomarker of stress, has recently been shown to have potential in evaluating the physiological state of individuals diagnosed with stress-related conditions including chronic fatigue syndrome. Noninvasive techniques to extract biomarkers from the body are a topic of considerable interest. One such technique to achieve this is known as reverse iontophoresis (RI) which is capable of extracting biomolecules through the skin. Unfortunately, however, the extracted levels are often considerably lower in concentration than those found in blood, thereby requiring a very sensitive analytical method with a low limit of detection. A promising sensing approach, which is well suited to handle such samples, is Surface Plasmon Resonance (SPR) spectroscopy. When coupled with aptamer modified surfaces, such sensors can achieve both selectivity and the required sensitivity. In this study, fabrication and characterization of a RIbased SPR biosensor for the measurement of cortisol has been developed. The optical mount and diffusion cell were both fabricated through the use of 3D printing techniques. The SPR sensor was configured to employ a prism couplerbased arrangement with a laser generation module and CCD line sensor. Cortisol-specific DNA aptamers were immobilized onto a gold surface to achieve the necessary selectivity. For demonstration purposes, cortisol was extracted by the RI system using a skin phantom flow system capable of generating time dependent concentration profiles. The captured sample was then transported using a micro-fluidic platform from the RI collection site to the SPR sensor for real-time monitoring. Analysis and system control was accomplished within a developed LabVIEW® program.

  5. Thermal modeling of laser-addressed liquid-crystal displays

    Science.gov (United States)

    Evans, K. E.; Nkansah, M. A.

    1990-06-01

    Optical-absorption calculations and finite-element methods are used to calculate time-dependent temperature profiles in two contrasting laser-addressed liquid-crystal displays. It is shown that the presence of conducting electrode layers has a significant effect on the temperature profiles both by affecting the optical-absorption characteristics of the cell and the resulting thermal conductivity. It is shown that efficient optical absorption does not necessarily result in the best cell-addressing performance.

  6. Addressing mathematics & statistics anxiety

    OpenAIRE

    Kotecha, Meena

    2015-01-01

    This paper should be of interest to mathematics and statistics educators ranging from pre-university to university education sectors. It will discuss some features of the author’s teaching model developed over her longitudinal study conducted to understand and address mathematics and statistics anxiety, which is one of the main barriers to engaging with these subjects especially in non-specialist undergraduates. It will demonstrate how a range of formative assessments are used to kindle, as w...

  7. Bioreactors addressing diabetes mellitus.

    Science.gov (United States)

    Minteer, Danielle M; Gerlach, Jorg C; Marra, Kacey G

    2014-11-01

    The concept of bioreactors in biochemical engineering is a well-established process; however, the idea of applying bioreactor technology to biomedical and tissue engineering issues is relatively novel and has been rapidly accepted as a culture model. Tissue engineers have developed and adapted various types of bioreactors in which to culture many different cell types and therapies addressing several diseases, including diabetes mellitus types 1 and 2. With a rising world of bioreactor development and an ever increasing diagnosis rate of diabetes, this review aims to highlight bioreactor history and emerging bioreactor technologies used for diabetes-related cell culture and therapies.

  8. Influence of process parameters on edge replication quality of lab-on-a-chip micro fluidic systems geometries

    DEFF Research Database (Denmark)

    Calaon, Matteo; Tosello, Guido; Hansen, Hans Nørgaard

    2013-01-01

    temperature were investigated. Moreover, consequences of different positions, directions and nominal channels width were considered. Edge replication quality was quantitatively characterized, analyzing calibrated scanning electron microscope (SEM) images with a digital imaging processing software. Results......The growing demand to manufacture, with high accuracy, structures enabling transportation, treatments and measurements of minuscule biomedical samples on polymer substrates is pushing the process capability of technologies such as injection molding to their limits. To characterize and asses...... the replication quality of molded micro-features on cyclic olefin copolymer (COC) a tool insert collecting critical channel cross sections was manufactured. The master was made by UV lithography and subsequent nickel electroplating. Effect of packing phase parameters (packing time, packing pressure) and mold...

  9. Addressing psychiatric comorbidity.

    Science.gov (United States)

    Woody, G E; McLellan, A T; O'Brien, C P; Luborsky, L

    1991-01-01

    Research studies indicate that addressing psychiatric comorbidity can improve treatment for selected groups of substance-abusing patients. However, the chances for implementing the necessary techniques on a large scale are compromised by the absence of professional input and guidance within programs. This is especially true in public programs, which treat some of the most disadvantaged, disturbed, and socially destructive individuals in the entire mental health system. One starting point for upgrading the level of knowledge and training of staff members who work in this large treatment system could be to develop a better and more authoritative information dissemination network. Such a system exists in medicine; physicians are expected to read appropriate journals and to guide their treatment decisions using the data contained in the journals. Standards of practice and methods for modifying current practice are within the tradition of reading new facts, studying old ones, and comparing treatment outcome under different conditions with what is actually being done. No such general system of information-gathering or -sharing exists, particularly in public treatment programs. One of the most flagrant examples of this "educational shortfall" can be found among those methadone programs that adamantly insist on prescribing no more than 30 to 35 mg/day for all patients, in spite of the overwhelming evidence that these dose levels generally are inadequate. In some cases, program directors are unaware of studies that have shown the relationship between dose and outcome. In other cases, they are aware of the studies but do not modify their practices accordingly. This example of inadequate dosing is offered as an example of one situation that could be improved by adherence to a system of authoritative and systematic information dissemination. Many issues in substance abuse treatment do not lend themselves to information dissemination as readily as that of methadone dosing

  10. Address Points, Addressing, Published in 2008, Taylor County.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Address Points dataset, was produced all or in part from Orthoimagery information as of 2008. It is described as 'Addressing'. Data by this publisher are often...

  11. Anonymous-address-resolution model

    Institute of Scientific and Technical Information of China (English)

    Guang-jia SONG; Zhen-zhou JI

    2016-01-01

    Address-resolution protocol (ARP) is an important protocol of data link layers that aims to obtain the corresponding relationship between Internet Protocol (IP) and Media Access Control (MAC) addresses. Traditional ARPs (address-resolution and neighbor-discovery protocols) do not consider the existence of malicious nodes, which reveals destination addresses in the resolution process. Thus, these traditional protocols allow malicious nodes to easily carry out attacks, such as man-in-the-middle attack and denial-of-service attack. To overcome these weaknesses, we propose an anonymous-address-resolution (AS-AR) protocol. AS-AR does not publicize the destination address in the address-resolution process and hides the IP and MAC addresses of the source node. The malicious node cannot obtain the addresses of the destination and the node which initiates the address resolution; thus, it cannot attack. Analyses and experiments show that AS-AR has a higher security level than existing security methods, such as secure-neighbor discovery.

  12. CONTENT-ADDRESSABLE MEMORY SYSTEMS,

    Science.gov (United States)

    The utility of content -addressable memories (CAM’s) within a general purpose computing system is investigated. Word cells within CAM may be...addressed by the character of all or a part of cell contents . Multimembered sets of word cells may be addressed simultaneously. The distributed logical...capabilities of CAM are extended to allow simultaneous transformation of multimembered sets and to allow communication between neighboring word cells. A

  13. Reclaiming unused IPv4 addresses

    CERN Multimedia

    IT Department

    2016-01-01

    As many people might know, the number of IPv4 addresses is limited and almost all have been allocated (see here and here for more information).   Although CERN has been allocated some 340,000 addresses, the way these are allocated across the site is not as efficient as we would like. As we face an increasing demand for IPv4 addresses with the growth in virtual machines, the IT Department’s Communication Systems Group will be reorganising address allocation during 2016 to make more efficient use of the IPv4 address ranges that have been allocated to CERN. We aim, wherever possible, to avoid giving out fixed IP addresses, and have all devices connected to the campus network obtain an address dynamically each time they connect. As a first stage, starting in February, IP addresses that have not been used for more than 9 months will be reclaimed. No information about the devices concerned will be deleted from LANDB, but a new IP address will have to be requested if they are ever reconnected to t...

  14. 2015 ASHG Awards and Addresses

    Science.gov (United States)

    2016-01-01

    Each year at the annual meeting of The American Society of Human Genetics (ASHG), addresses are given in honor of The Society and a number of award winners. A summary of each of these is given below. On the following pages, we have printed the presidential address and the addresses for the William Allan Award, the Curt Stern Award, and the Victor A. McKusick Leadership Award. Webcasts of these addresses, as well as those of many other presentations, can be found at http://www.ashg.org.

  15. A Pedagogy to Address Plagiarism.

    Science.gov (United States)

    Whitaker, Elaine E.

    1993-01-01

    Presents strategies and methods by which writing teachers can openly address the potential problem of plagiarism. Details specific methods used by one teacher to train students how to quote and cite materials without plagiarizing. (HB)

  16. Optics/Optical Diagnostics Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — The Optics/Optical Diagnostics Laboratory supports graduate instruction in optics, optical and laser diagnostics and electro-optics. The optics laboratory provides...

  17. Optical Design for Biomedical Imaging

    CERN Document Server

    Liang, Rongguang

    2010-01-01

    Designing an efficient imaging system for biomedical optics requires a solid understanding of the special requirements of the optical systems for biomedical imaging and the optical components used in the systems. However, a lack of reference books on optical design (imaging and illumination) for biomedical imaging has led to some inefficient systems. This book fills the gap between biomedical optics and optical design by addressing the fundamentals of biomedical optics and optical engineering, and biomedical imaging systems. The first half provides a brief introduction to biomedical optics and

  18. Diffusion dynamics in microfluidic dye lasers

    DEFF Research Database (Denmark)

    Gersborg-Hansen, Morten; Balslev, Søren; Mortensen, Niels Asger

    2007-01-01

    We have investigated the bleaching dynamics that occur in opto-fluidic dye lasers, where the liquid laser dye in a channel is locally bleached due to optical pumping. Our studies suggest that for micro-fluidic devices, the dye bleaching may be compensated through diffusion of dye molecules alone....... By relying on diffusion rather than convection to generate the necessary dye replenishment, our observation potentially allows for a significant simplification of opto-fluidic dye laser device layouts, omitting the need for cumbersome and costly external fluidic handling or on-chip micro-fluidic pumping...

  19. Introduction to IP address management

    CERN Document Server

    Rooney, Tim

    2010-01-01

    "The book begins with a basic overview of IP networking, followed by chapters describing each of the three core IPAM technologies: IPv4 and IPv6 addressing, DHCP, and DNS. The next three chapters describe IPAM management techniques and practice, followed by chapters on IPv4-IPv6 co-existence, security and the IPAM business case"--

  20. Geocoding Patient Addresses for Biosurveillance

    OpenAIRE

    Olson, Karen L; Kenneth D Mandl

    2002-01-01

    New biosurveillance information systems are being developed to detect clusters of disease using temporal and spatial characteristics. Geographical Information Systems (GIS) can use patient addresses stored in hospital information systems to assign latitude and longitude coordinates, enabling the detection of spatial clusters. However, inaccuracy can be introduced during the geocoding process and this could have a profound adverse effect on detection sensitivity. In an analysis of three years ...

  1. Nonlinear effects in optical fibers

    CERN Document Server

    Ferreira, Mario F

    2011-01-01

    Cutting-edge coverage of nonlinear phenomena occurring inside optical fibers Nonlinear fiber optics is a specialized part of fiber optics dealing with optical nonlinearities and their applications. As fiber-optic communication systems have become more advanced and complex, the nonlinear effects in optical fibers have increased in importance, as they adversely affect system performance. Paradoxically, the same nonlinear phenomena also offer the promise of addressing the bandwidth bottleneck for signal processing for future ultra-high speed optical networks. Nonlinear Effects in Optical Fiber

  2. Atomic clusters with addressable complexity

    Science.gov (United States)

    Wales, David J.

    2017-02-01

    A general formulation for constructing addressable atomic clusters is introduced, based on one or more reference structures. By modifying the well depths in a given interatomic potential in favour of nearest-neighbour interactions that are defined in the reference(s), the potential energy landscape can be biased to make a particular permutational isomer the global minimum. The magnitude of the bias changes the resulting potential energy landscape systematically, providing a framework to produce clusters that should self-organise efficiently into the target structure. These features are illustrated for small systems, where all the relevant local minima and transition states can be identified, and for the low-energy regions of the landscape for larger clusters. For a 55-particle cluster, it is possible to design a target structure from a transition state of the original potential and to retain this structure in a doubly addressable landscape. Disconnectivity graphs based on local minima that have no direct connections to a lower minimum provide a helpful way to visualise the larger databases. These minima correspond to the termini of monotonic sequences, which always proceed downhill in terms of potential energy, and we identify them as a class of biminimum. Multiple copies of the target cluster are treated by adding a repulsive term between particles with the same address to maintain distinguishable targets upon aggregation. By tuning the magnitude of this term, it is possible to create assemblies of the target cluster corresponding to a variety of structures, including rings and chains.

  3. Small, fast, and tough: Shrinking down integrated elastomer transducers

    Science.gov (United States)

    Rosset, Samuel; Shea, Herbert R.

    2016-09-01

    We review recent progress in miniaturized dielectric elastomer actuators (DEAs), sensors, and energy harvesters. We focus primarily on configurations where the large strain, high compliance, stretchability, and high level of integration offered by dielectric elastomer transducers provide significant advantages over other mm or μm-scale transduction technologies. We first present the most active application areas, including: tunable optics, soft robotics, haptics, micro fluidics, biomedical devices, and stretchable sensors. We then discuss the fabrication challenges related to miniaturization, such as thin membrane fabrication, precise patterning of compliant electrodes, and reliable batch fabrication of multilayer devices. We finally address the impact of miniaturization on strain, force, and driving voltage, as well as the important effect of boundary conditions on the performance of mm-scale DEAs.

  4. Optical remote sensing

    CERN Document Server

    Prasad, Saurabh; Chanussot, Jocelyn

    2011-01-01

    Optical remote sensing relies on exploiting multispectral and hyper spectral imagery possessing high spatial and spectral resolutions respectively. These modalities, although useful for most remote sensing tasks, often present challenges that must be addressed for their effective exploitation. This book presents current state-of-the-art algorithms that address the following key challenges encountered in representation and analysis of such optical remotely sensed data: challenges in pre-processing images, storing and representing high dimensional data, fusing different sensor modalities, patter

  5. Nanoscale content-addressable memory

    Science.gov (United States)

    Davis, Bryan (Inventor); Principe, Jose C. (Inventor); Fortes, Jose (Inventor)

    2009-01-01

    A combined content addressable memory device and memory interface is provided. The combined device and interface includes one or more one molecular wire crossbar memories having spaced-apart key nanowires, spaced-apart value nanowires adjacent to the key nanowires, and configurable switches between the key nanowires and the value nanowires. The combination further includes a key microwire-nanowire grid (key MNG) electrically connected to the spaced-apart key nanowires, and a value microwire-nanowire grid (value MNG) electrically connected to the spaced-apart value nanowires. A key or value MNGs selects multiple nanowires for a given key or value.

  6. Addressing inequities in healthy eating.

    Science.gov (United States)

    Friel, Sharon; Hattersley, Libby; Ford, Laura; O'Rourke, Kerryn

    2015-09-01

    What, when, where and how much people eat is influenced by a complex mix of factors at societal, community and individual levels. These influences operate both directly through the food system and indirectly through political, economic, social and cultural pathways that cause social stratification and influence the quality of conditions in which people live their lives. These factors are the social determinants of inequities in healthy eating. This paper provides an overview of the current evidence base for addressing these determinants and for the promotion of equity in healthy eating.

  7. Addressing the workforce pipeline challenge

    Energy Technology Data Exchange (ETDEWEB)

    Leonard Bond; Kevin Kostelnik; Richard Holman

    2006-11-01

    A secure and affordable energy supply is essential for achieving U.S. national security, in continuing U.S. prosperity and in laying the foundations to enable future economic growth. To meet this goal the next generation energy workforce in the U.S., in particular those needed to support instrumentation, controls and advanced operations and maintenance, is a critical element. The workforce is aging and a new workforce pipeline, to support both current generation and new build has yet to be established. The paper reviews the challenges and some actions being taken to address this need.

  8. Optic glioma

    Science.gov (United States)

    Glioma - optic; Optic nerve glioma; Juvenile pilocytic astrocytoma; Brain cancer - optic glioma ... Optic gliomas are rare. The cause of optic gliomas is unknown. Most optic gliomas are slow-growing ...

  9. Flexible, fibre-addressable surface-plasmon-resonance chip

    Science.gov (United States)

    Chowdhury, Faqrul; Chau, Kenneth J.

    2012-02-01

    Surface plasmon resonance (SPR) sensors exploit optical coupling to surface plasmons, light waves bound to a metal surface. In the most common configuration, a SPR sensor is used with an external light source, optical components to polarize incident light and guide light to and from a metal surface, a coupling device to convert free-space light into surface plasmons and back into free-space light, and a light detector. The light source, the optical components, and the light detector are external to the SPR device, and the coupling structure is often integrated directly with the surface-plasmon-sustaining metal surface. The requirement of several external components restricts the miniaturization of SPR devices and prohibits low-cost implementation. To address these limitations, we design, fabricate, and test a new SPR device chip that is fibre-addressable, does not require a discrete coupling structure, and integrates light delivery, light polarization control, surface plasmon coupling onto a thin, flexible substrate. Our SPR chip is constructed from a thin gold layer deposited on top of a clear plastic sheet, which is then optically connected from the bottom surface onto a plastic linear polarizer sheet. Two cleaved fibres, one to input light and the other to collect reflected light, are then optically attached to SPR device. We experimentally characterize the SPR device and find good agreement between our measurements and a theoretical model based on transfer matrix formalism.

  10. Building Footprints - Montana Structures/Addresses Framework

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — The Montana Structures/Addresses Framework is a statewide spatial database of structure and address points in the State of Montana. The Montana Structures/Addresses...

  11. Addressing neurological disorders with neuromodulation.

    Science.gov (United States)

    Oluigbo, Chima O; Rezai, Ali R

    2011-07-01

    Neurological disorders are becoming increasingly common in developed countries as a result of the aging population. In spite of medications, these disorders can result in progressive loss of function as well as chronic physical, cognitive, and emotional disability that ultimately places enormous emotional and economic on the patient, caretakers, and the society in general. Neuromodulation is emerging as a therapeutic option in these patients. Neuromodulation is a field, which involves implantable devices that allow for the reversible adjustable application of electrical, chemical, or biological agents to the central or peripheral nervous system with the objective of altering its functioning with the objective of achieving a therapeutic or clinically beneficial effect. It is a rapidly evolving field that brings together many different specialties in the fields of medicine, materials science, computer science and technology, biomedical, and neural engineering as well as the surgical or interventional specialties. It has multiple current and emerging indications, and an enormous potential for growth. The main challenges before it are in the need for effective collaboration between engineers, basic scientists, and clinicians to develop innovations that address specific problems resulting in new devices and clinical applications.

  12. Cloud optics

    CERN Document Server

    Kokhanovsky, A

    2006-01-01

    Clouds affect the climate of the Earth, and they are an important factor in the weather. Therefore, their radiative properties must be understood in great detail. This book summarizes current knowledge on cloud optical properties, for example their ability to absorb, transmit, and reflect light, which depends on the clouds' geometrical and microphysical characteristics such as sizes of droplets and crystals, their shapes, and structures. In addition, problems related to the image transfer through clouds and cloud remote sensing are addressed in this book in great detail. This book can be an im

  13. An address geocoding solution for Chinese cities

    Science.gov (United States)

    Zhang, Xuehu; Ma, Haoming; Li, Qi

    2006-10-01

    We introduce the challenges of address geocoding for Chinese cities and present a potential solution along with a prototype system that deal with these challenges by combining and extending current geocoding solutions developed for United States and Japan. The proposed solution starts by separating city addresses into "standard" addresses which meet a predefined address model and non-standard ones. The standard addresses are stored in a structured relational database in their normalized forms, while a selected portion of the non-standard addresses are stored as aliases to the standard addresses. An in-memory address index is then constructed from the address database and serves as the basis for real-time address matching. Test results were obtained from two trials conducted in the city Beijing. On average 80% matching rate were achieved. Possible improvements to the current design are also discussed.

  14. Innovative Solar Optical Materials

    Science.gov (United States)

    Lampert, Carl M.

    1984-02-01

    A variety of optical coatings are discussed in the context of solar energy utilization. Well-known coatings such as transparent conductors (heat mirrors), selective absorbers, and reflective films are surveyed briefly. Emphasis is placed on the materials' limitations and on use of lesser-known optical coatings and materials. Physical and optical properties are detailed for protective antireflection films, cold mirrors, fluorescent concentrator materials, radiative cooling surfaces, and optical switching films including electrochromic, thermochromic, photochromic, and liquid crystal types. For many of these materials, research has only recently been considered, so various design and durability issues need to be addressed.

  15. Fully integrated optical system for lab-on-a-chip applications

    DEFF Research Database (Denmark)

    Balslev, Søren; Olsen, Brian Bilenberg; Geschke, Oliver

    2004-01-01

    We present a lab-on-a-chip device featuring a microfluidic dye laser, wave-guides, microfluidic components and photo-detectors integrated on the chip. The microsystem is designed for wavelength selective absorption measurements in the visible range on a fluidic sample, which can be prepared....../mixed on-chip. The laser structures, wave-guides and micro-fluidic handling system are defined in a single UV-lithography step on a 10 μm thick SU-8 layer on top of the substrate. The SU-8 structures are sealed by a Borofloat glass lid, using polymethylmethacrylate (PMMA) adhesive bonding....

  16. A thermally self-sustained micro-power plant with integrated micro-solid oxide fuel cells, micro-reformer and functional micro-fluidic carrier

    NARCIS (Netherlands)

    Scherrer, B.; Evans, A.; Santis-Alvarez, A. J.; Jiang, B.; Martynczuk, J.; Galinski, H.; Nabavi, M.; Prestat, M.; Tölke, R.; Bieberle, A.; Poulikakos, D.; Muralt, P.; Niedermann, P.; Dommann, A.; Maeder, T.; Heeb, P.; Straessle, V.; Muller, C.; Gauckler, L. J.

    2014-01-01

    Low temperature micro-solid oxide fuel cell (micro-SOFC) systems are an attractive alternative power source for small-size portable electronic devices due to their high energy efficiency and density. Here, we report on a thermally self-sustainable reformer micro-SOFC assembly. The device consists of

  17. Evaluation of cell lysis procedures and use of a micro fluidic system for an automated DNA-based cell identification in interplanetary missions

    Science.gov (United States)

    Hall, J. A.; Felnagle, E.; Fries, M.; Spearing, S.; Monaco, L.; Steele, A.

    2006-12-01

    A Modular Assay System for Solar System Exploration (MASSE) is being developed to include sample handling, pre-treatment, separation and analysis of biological target compounds by both DNA and protein microarrays. To better design sensitive and accurate initial upstream sample handling of the MASSE instrument, experiments investigating the sensitivity and potential extraction bias of commercially available DNA extraction kits between classes of environmentally relevant prokaryotes such as gram-negative bacteria ( Escherichia coli), gram-positive bacteria ( Bacillus megatarium), and Archaea ( Haloarcula marismortui) were performed. For extractions of both planktonic cultures and spiked Mars simulated regolith, FTA ® paper demonstrated the highest sensitivity, with detection as low as ˜1×10 1 cells and ˜3.3×10 2 cells, respectively. In addition to the highest sensitivity, custom modified application of FTA ® paper extraction protocol is the simplest in terms of incorporation into MASSE and displayed little bias in sensitivity with respect to prokaryotic cell type. The implementation of FTA paper for environmental microbiology investigations appears to be a viable and effective option potentially negating the need for other pre-concentration steps such as filtration and negating concerns regarding extraction efficiency of cells. In addition to investigations on useful technology for upstream sample handling in MASSE, we have also evaluated the potential for μTAS to be employed in the MASSE instrument by employing proprietary lab-on-a-chip development technology to investigate the potential for microfluidic cell lysis of different prokaryotic cells employing both chemical and biological lysis agents. Real-time bright-field microscopy and quantitative PMT detection indicated that that gram positive, gram negative and archaeal cells were effectively lyzed in a few seconds using the microfluidic chip protocol developed. This included employing a lysis buffer with components including lysozyme, Protease, Proteinase K, Tween-20 and TritonX-100. The effectiveness of antibiotics and other chemical lysis agents were also screened and demonstrated partial effectiveness on all three cell types. This work demonstrates a step wise approach to evaluating the efficacy and sensitivity of commercial macro-scale technology and state-of-the-art developmental microfluidic technology under consideration for incorporation into the remotely operated MASSE instrument currently under development at the Carnegie Institution of Washington.

  18. A thermally self-sustained micro-power plant with integrated micro-solid oxide fuel cells, micro-reformer and functional micro-fluidic carrier

    NARCIS (Netherlands)

    Scherrer, B.; Evans, A.; Santis-Alvarez, A. J.; Jiang, B.; Martynczuk, J.; Galinski, H.; Nabavi, M.; Prestat, M.; Tölke, R.; Bieberle, A.; Poulikakos, D.; Muralt, P.; Niedermann, P.; Dommann, A.; Maeder, T.; Heeb, P.; Straessle, V.; Muller, C.; Gauckler, L. J.

    2014-01-01

    Low temperature micro-solid oxide fuel cell (micro-SOFC) systems are an attractive alternative power source for small-size portable electronic devices due to their high energy efficiency and density. Here, we report on a thermally self-sustainable reformer micro-SOFC assembly. The device consists of

  19. A micro-fluidic sub-microliter sample introduction system for direct analysis of Chinese rice wine by inductively coupled plasma mass spectrometry using external aqueous calibration

    Energy Technology Data Exchange (ETDEWEB)

    Cheng, Heyong [Institute of Microanalytical Systems, Department of Chemistry, Zhejiang University, Hangzhou, 310027 (China); College of Material Chemistry and Chemical Engineering, Hangzhou Normal University, Hangzhou, 310036 (China); Liu, Jinhua [College of Material Chemistry and Chemical Engineering, Hangzhou Normal University, Hangzhou, 310036 (China); Xu, Zigang [Institute of Analytical and Applied Chemistry, Department of Chemistry, Zhejiang University, Hangzhou, 310027 (China); Yin, Xuefeng, E-mail: yinxf@zju.edu.cn [Institute of Microanalytical Systems, Department of Chemistry, Zhejiang University, Hangzhou, 310027 (China); College of Material Chemistry and Chemical Engineering, Hangzhou Normal University, Hangzhou, 310036 (China)

    2012-07-15

    A microfluidic sub-microliter sample introducing system was developed for direct analysis of Chinese rice wine by inductively coupled plasma mass spectrometry (ICP-MS). It consisted of a microfluidic chip integrating variable-volume sampling channels (0.1-0.8 {mu}L), an eight-way multi-functional valve used in flow injection analysis (FIA), a syringe pump and a peristaltic pump of the Ar ICP-MS instrument. Three solutions, i.e., 15, 40 and 100 g L{sup -1} glucose in 20% ethanol were used to simulate Chinese rice wine of the dry type, the semidry type and the semisweet type, each. The effects of their volume introduced into ICP-MS on the plasma stability and ICP-MS intensities were studied. The experimental results showed that neither alteration of plasma stability nor carbon deposition was observed when the sampling volume of 20% ethanol containing 100 g L{sup -1} glucose was downscaled to 0.8 {mu}L. Further reducing the sampling volume to 0.4 {mu}L, no significant difference between the intensities of multi-element standard prepared in three simulated Chinese rice wine matrices and those in aqueous solution was observed. It indicated no negative effect of Chinese rice wine matrix on the ICP-MS intensities. A sampling volume of 0.4 {mu}L was considered to be a good compromise between sensitivity and matrix effect. The flow rate of the carrier was chosen as 20 {mu}L min{sup -1} for obtaining peaks with the highest peak height within the shortest time. Based on these observations, a microflow injection ({mu}FI) method for the direct determination of cadmium and lead in Chinese rice wine by ICP-MS using an external aqueous calibration was developed. The sample throughput was 45 h{sup -1} with the detection limit of 19.8 and 10.4 ng L{sup -1} for Cd and Pb, respectively. The contents of Cd and Pb in 10 Chinese rice wine samples were measured. The results agreed well with those determined by ICP-MS with the conventional sampling system after microwave assisted digestion. The recoveries of three Chinese rice wine samples ranged between 95.5 and 102.8%. Furthermore, the determined contents of Cd and Pb in a certified reference material of red wine (GBW 10031) and a quality control test material of wine (FAPAS T07163QC) by the proposed method were in fairly good accordance with the certified/assigned values. All results verified the accuracy of our method. - Highlights: Black-Right-Pointing-Pointer A microfluidic sub-microliter sample introduction system was developed for ICP-MS. Black-Right-Pointing-Pointer Direct analysis of Chinese rice wine by ICP-MS was achieved. Black-Right-Pointing-Pointer No carbon deposit or matrix effect from Chinese rice wine was observed.

  20. Field guide to nonlinear optics

    CERN Document Server

    Powers, Peter E

    2013-01-01

    Optomechanics is a field of mechanics that addresses the specific design challenges associated with optical systems. This [i]Field Guide [/i]describes how to mount optical components, as well as how to analyze a given design. It is intended for practicing optical and mechanical engineers whose work requires knowledge in both optics and mechanics. This Field Guide is designed for those looking for a condensed and concise source of key concepts, equations, and techniques for nonlinear optics. Topics covered include technologically important effects, recent developments in nonlinear optics

  1. What is an address in South Africa?

    CSIR Research Space (South Africa)

    Coetzee, S

    2007-11-01

    Full Text Available numbers inside the security estate and therefore these addresses are not necessarily part of the municipal address database. If a person inside such a security estate wants to open a financial account, how can one verify that their address is valid? A... African addresses’, subsequently given the designation SANS 1883. The aim of the standard is not to devise a new system of addressing or to build a national address database, but rather to enable interoperability in address data sets and geographical...

  2. 77 FR 48429 - Commission Address Change

    Science.gov (United States)

    2012-08-14

    ... HEALTH REVIEW COMMISSION 29 CFR Parts 2700, 2701, 2702, 2704, 2705, 2706 Commission Address Change AGENCY... to inform the public of the address change. DATES: This final rule will take effect on August 27... because the amendments are of a minor and administrative nature dealing with only a change in address....

  3. Novel Duplicate Address Detection with Hash Function.

    Science.gov (United States)

    Song, GuangJia; Ji, ZhenZhou

    2016-01-01

    Duplicate address detection (DAD) is an important component of the address resolution protocol (ARP) and the neighbor discovery protocol (NDP). DAD determines whether an IP address is in conflict with other nodes. In traditional DAD, the target address to be detected is broadcast through the network, which provides convenience for malicious nodes to attack. A malicious node can send a spoofing reply to prevent the address configuration of a normal node, and thus, a denial-of-service attack is launched. This study proposes a hash method to hide the target address in DAD, which prevents an attack node from launching destination attacks. If the address of a normal node is identical to the detection address, then its hash value should be the same as the "Hash_64" field in the neighboring solicitation message. Consequently, DAD can be successfully completed. This process is called DAD-h. Simulation results indicate that address configuration using DAD-h has a considerably higher success rate when under attack compared with traditional DAD. Comparative analysis shows that DAD-h does not require third-party devices and considerable computing resources; it also provides a lightweight security resolution.

  4. IP Address Management Principles and Practice

    CERN Document Server

    Rooney, Timothy

    2010-01-01

    This book will be the first covering the subject of IP address management (IPAM). The practice of IPAM includes the application of network management disciplines to IP address space and associated network services, namely DHCP (Dynamic Host Configuration Protocol) and DNS (Domain Name System). The consequence of inaccurately configuring DHCP is that end users may not be able to obtain IP addresses to access the network. Without proper DNS configuration, usability of the network will greatly suffer as the name-to-address lookup process may fail. Imagine having to navigate to a website or send a

  5. Optical atomic clocks

    CERN Document Server

    Poli, N; Gill, P; Tino, G M

    2014-01-01

    In the last ten years extraordinary results in time and frequency metrology have been demonstrated. Frequency-stabilization techniques for continuous-wave lasers and femto-second optical frequency combs have enabled a rapid development of frequency standards based on optical transitions in ultra-cold neutral atoms and trapped ions. As a result, today's best performing atomic clocks tick at an optical rate and allow scientists to perform high-resolution measurements with a precision approaching a few parts in $10^{18}$. This paper reviews the history and the state of the art in optical-clock research and addresses the implementation of optical clocks in a possible future redefinition of the SI second as well as in tests of fundamental physics.

  6. Optical network democratization.

    Science.gov (United States)

    Nejabati, Reza; Peng, Shuping; Simeonidou, Dimitra

    2016-03-06

    The current Internet infrastructure is not able to support independent evolution and innovation at physical and network layer functionalities, protocols and services, while at same time supporting the increasing bandwidth demands of evolving and heterogeneous applications. This paper addresses this problem by proposing a completely democratized optical network infrastructure. It introduces the novel concepts of the optical white box and bare metal optical switch as key technology enablers for democratizing optical networks. These are programmable optical switches whose hardware is loosely connected internally and is completely separated from their control software. To alleviate their complexity, a multi-dimensional abstraction mechanism using software-defined network technology is proposed. It creates a universal model of the proposed switches without exposing their technological details. It also enables a conventional network programmer to develop network applications for control of the optical network without specific technical knowledge of the physical layer. Furthermore, a novel optical network virtualization mechanism is proposed, enabling the composition and operation of multiple coexisting and application-specific virtual optical networks sharing the same physical infrastructure. Finally, the optical white box and the abstraction mechanism are experimentally evaluated, while the virtualization mechanism is evaluated with simulation.

  7. A New Method of Chinese Address Extraction Based on Address Tree Model

    Directory of Open Access Journals (Sweden)

    KANG Mengjun

    2015-01-01

    Full Text Available Address is a spatial location encoding method of individual geographical area. In China, address planning is relatively backward due to the rapid development of the city, resulting in the presence of large number of non-standard address. The space constrain relationship of standard address model is analyzed in this paper and a new method of standard address extraction based on the tree model is proposed, which regards topological relationship as consistent criteria of space constraints. With this method, standard address can be extracted and errors can be excluded from non-standard address. Results indicate that higher math rate can be obtained with this method.

  8. Image compression using address-vector quantization

    Science.gov (United States)

    Nasrabadi, Nasser M.; Feng, Yushu

    1990-12-01

    A novel vector quantization scheme, the address-vector quantizer (A-VQ), is proposed which exploits the interblock correlation by encoding a group of blocks together using an address-codebook (AC). The AC is a set of address-codevectors (ACVs), each representing a combination of addresses or indices. Each element of the ACV is an address of an entry in the LBG-codebook, representing a vector-quantized block. The AC consists of an active (addressable) region and an inactive (nonaddressable) region. During encoding the ACVs in the AC are reordered adaptively to bring the most probable ACVs into the active region. When encoding an ACV, the active region is checked, and if such an address combination exists, its index is transmitted to the receiver. Otherwise, the address of each block is transmitted individually. The SNR of the images encoded by the A-VQ method is the same as that of a memoryless vector quantizer, but the bit rate is by a factor of approximately two.

  9. State of industry, environment, human resources addressed

    Energy Technology Data Exchange (ETDEWEB)

    Yergin, D.; Brookes, W.; DeArment, R.

    1991-07-01

    The article is based on three addresses to the AMC Coal Convention '91. Yergin examines the impact of the Gulf crisis on the world energy market. Brookes is sceptical about the 'green industry' and calls for better scientific evidence. DeArment addresses the MSAA's Job Safety Analysis program and other health and safety matters.

  10. Forms of Address in Chilean Spanish

    Science.gov (United States)

    Bishop, Kelley; Michnowicz, Jim

    2010-01-01

    The present investigation examines possible social and linguistic factors that influence forms of address used in Chilean Spanish with various interlocutors. A characteristic of the Spanish of Chile is the use of a variety of forms of address for the second person singular, "tu", "vos", and "usted", with corresponding…

  11. Public Address Systems. Specifications - Installation - Operation.

    Science.gov (United States)

    Palmer, Fred M.

    Provisions for public address in new construction of campus buildings (specifications, installations, and operation of public address systems), are discussed in non-technical terms. Consideration is given to microphones, amplifiers, loudspeakers and the placement and operation of various different combinations. (FS)

  12. Address forms in Chinese audit opinions

    Institute of Scientific and Technical Information of China (English)

    Ziye; Zhao

    2014-01-01

    Although forms of address are widely used in textual and other types of disclosure,empirical evidence of their effects is rare.China provides a unique setting in which to test the economic consequences of the forms of address used in audit reports.From 2003 to 2011,about 60%of auditors surveyed addressed their clients by their real names in audit opinions,while the others used honorifics.Based on a sample of Chinese audit opinions,I report the following findings.First,the announcement of an audit opinion that uses the client’s real name elicits a greater market response than the announcement of an opinion featuring an honorific form of address.Second,the effects of real-name forms of address are stronger in firms with weak board governance.Third,the association between audit fees and audit risk factors,such as loss-making,is stronger in firms that are addressed by their real names in audit reports.I conclude from these findings that the forms of address used in audit opinions may reveal private information on audit quality.The results of this study are consistent with the power-solidarity effect described by sociolinguists.

  13. Local address and emergency contact details

    CERN Multimedia

    2013-01-01

    The HR Department would like to remind members of the personnel that they are responsible for ensuring that their personal data concerning local address and preferred emergency contact details remains valid and up-to-date.   Both are easily accessible via the links below: Local address: https://edh.cern.ch/Document/Personnel/LocalAddressChange   Emergency contacts: https://edh.cern.ch/Document/Personnel/EC   Please take a few minutes to check your details and modify if necessary. Thank you in advance. HR Department Head Office

  14. Optical Electronics. Electronics Module 9. Instructor's Guide.

    Science.gov (United States)

    Franken, Bill

    This module is the ninth of 10 modules in the competency-based electronics series. Introductory materials include a listing of competencies addressed in the module, a parts/equipment list, and a cross reference table of instructional materials. Five instructional units cover: fiber optic cable; optical coupler; lasers and masers; optical displays;…

  15. VT E911 road address range geocoder

    Data.gov (United States)

    Vermont Center for Geographic Information — VT E911 road address range geocoder. VCGI, in collaboration with the VT E911 Board, has created a suite of geocoding services that can be used to batch geocode...

  16. Address Points, Published in unknown, SWGRC.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Address Points dataset as of unknown. Data by this publisher are often provided in Geographic coordinate system; in a Not Sure projection; The extent of these...

  17. Addressing Transition Issues in Languages Education.

    Science.gov (United States)

    Steigler-Peters, Susi; Moran, Wendy; Piccioli, Maria Teresa; Chesterton, Paul

    2003-01-01

    Focuses on what has been learned from the implementation and evaluation of the Australian Language and Continuity Initiative (LCI) in relation to addressing transition issues in language education. (Author/VWL)

  18. An Efficient Reconfigurable Content Addressable Memory

    Directory of Open Access Journals (Sweden)

    Saswathy Sekharan

    2014-01-01

    Full Text Available This paper introduces an efficient reconfigurable Content Addressable memory (CAMs which is a hardware search engine that are much faster than other algorithmic approaches for search intensive applications. Content Addressable Memories are composed of conventional semiconductor memory (usually SRAM with added comparison circuitry that enables a search operation to complete in a single clock cycle. To understand more about Content Addressable Memory, it helps to contrast it with RAM. A RAM is an integrated circuit that stores data temporarily. In CAM, the user supplies the data and gets back the address.In this paper we introduce a temporary memory called Cache. The cache-CAM (C-CAM saves 80% power over a conventional CAM. Compared with existing software search engines proposed hardware search engine can do multiple searches at a time with more flexibility.

  19. VT E911 ESITE geocoder - address points

    Data.gov (United States)

    Vermont Center for Geographic Information — VT E911 ESITE geocoder - address points. VCGI, in collaboration with the VT E911 Board, has created a suite of geocoding services that can be used to batch geocode...

  20. Chemical Address Tags of Fluorescent Bioimaging Probes

    OpenAIRE

    Shedden, Kerby; Rosania, Gus R.

    2010-01-01

    Chemical address tags can be defined as specific structural features shared by a set of bioimaging probes having a predictable influence on cell-associated visual signals obtained from these probes. Here, using a large image dataset acquired with a high content screening instrument, machine vision and cheminformatics analysis have been applied to reveal chemical address tags. With a combinatorial library of fluorescent molecules, fluorescence signal intensity, spectral, and spatial features c...

  1. Integrated optical transceiver with electronically controlled optical beamsteering

    Energy Technology Data Exchange (ETDEWEB)

    Davids, Paul; DeRose, Christopher; Tauke-Pedretti, Anna

    2017-08-22

    A beam-steering optical transceiver is provided. The transceiver includes one or more modules, each comprising an antenna chip and a control chip bonded to the antenna chip. Each antenna chip has a feeder waveguide, a plurality of row waveguides that tap off from the feeder waveguide, and a plurality of metallic nanoantenna elements arranged in a two-dimensional array of rows and columns such that each row overlies one of the row waveguides. Each antenna chip also includes a plurality of independently addressable thermo-optical phase shifters, each configured to produce a thermo-optical phase shift in a respective row. Each antenna chip also has, for each row, a row-wise heating circuit configured to produce a respective thermo-optic phase shift at each nanoantenna element along its row. The control chip includes controllable current sources for the independently addressable thermo-optical phase shifters and the row-wise heating circuits.

  2. South African address standard and initiatives towards an international address standard

    CSIR Research Space (South Africa)

    Cooper, Antony K

    2008-10-01

    Full Text Available Various countries and international organizations have address standards or are developing them. An address is needed for many more applications than just postal delivery, such as: goods delivery; connecting utilities; opening bank accounts; voting...

  3. South African address standard and initiatives towards an international address standard.

    CSIR Research Space (South Africa)

    Cooper, Anthony K

    2008-09-01

    Full Text Available Various countries and international organizations have address standards or are developing them. An address is needed for many more applications than just postal delivery, such as: goods delivery; connecting utilities; opening bank accounts; voting...

  4. Parcels and Land Ownership, rural addressing does collect address points, Published in unknown, Gibson County Government.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Parcels and Land Ownership dataset as of unknown. It is described as 'rural addressing does collect address points'. The extent of these data is generally Gila...

  5. Address Points, Address points, Published in 2008, Norton County Appraisal Office.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Address Points dataset, was produced all or in part from Orthoimagery information as of 2008. It is described as 'Address points'. Data by this publisher are...

  6. 46 CFR 67.113 - Managing owner designation; address; requirement to report change of address.

    Science.gov (United States)

    2010-10-01

    ... change of address. The owner of each vessel must designate a managing owner on the Application for...) Whenever the address of the managing owner changes, the managing owner shall notify the Director, National... 46 Shipping 2 2010-10-01 2010-10-01 false Managing owner designation; address; requirement to...

  7. Introduction to Optical Tweezers.

    Science.gov (United States)

    Koch, Matthias D; Shaevitz, Joshua W

    2017-01-01

    Thirty years after their invention by Arthur Ashkin and colleagues at Bell Labs in 1986 [1], optical tweezers (or traps) have become a versatile tool to address numerous biological problems. Put simply, an optical trap is a highly focused laser beam that is capable of holding and applying forces to micron-sized dielectric objects. However, their development over the last few decades has converted these tools from boutique instruments into highly versatile instruments of molecular biophysics. This introductory chapter intends to give a brief overview of the field, highlight some important scientific achievements, and demonstrate why optical traps have become a powerful tool in the biological sciences. We introduce a typical optical setup, describe the basic theoretical concepts of how trapping forces arise, and present the quantitative position and force measurement techniques that are most widely used today.

  8. Nonlinear optical thin films

    Science.gov (United States)

    Leslie, Thomas M.

    1993-01-01

    A focused approach to development and evaluation of organic polymer films for use in optoelectronics is presented. The issues and challenges that are addressed include: (1) material synthesis, purification, and the tailoring of the material properties; (2) deposition of uniform thin films by a variety of methods; (3) characterization of material physical properties (thermal, electrical, optical, and electro-optical); and (4) device fabrication and testing. Photonic materials, devices, and systems were identified as critical technology areas by the Department of Commerce and the Department of Defense. This approach offers strong integration of basic material issues through engineering applications by the development of materials that can be exploited as the active unit in a variety of polymeric thin film devices. Improved materials were developed with unprecedented purity and stability. The absorptive properties can be tailored and controlled to provide significant improvement in propagation losses and nonlinear performance. Furthermore, the materials were incorporated into polymers that are highly compatible with fabrication and patterning processes for integrated optical devices and circuits. By simultaneously addressing the issues of materials development and characterization, keeping device design and fabrication in mind, many obstacles were overcome for implementation of these polymeric materials and devices into systems. We intend to considerably improve the upper use temperature, poling stability, and compatibility with silicon based devices. The principal device application that was targeted is a linear electro-optic modulation etalon. Organic polymers need to be properly designed and coupled with existing integrated circuit technology to create new photonic devices for optical communication, image processing, other laser applications such as harmonic generation, and eventually optical computing. The progression from microscopic sample to a suitable film

  9. Ergonomics guidelines for designing electronic mail addresses.

    Science.gov (United States)

    Rau, P L; Salvendy, G

    2001-03-15

    The aim was to design a human-centred electronic mail (e-mail) address system based on networking technology and cognitive ergonomics. Based on the background literature and the results of users' survey, a conceptual model is developed for designing e-mail addresses. This model consists of e-mail address components of formats, domain length, meaningfulness, orientation and information type pertaining to recall, information association and categorization. Five hypotheses were proposed to test the conceptual model, and four experiments were conducted with 85 participants to test the hypotheses. The dependent variables were performance time, error rate and degree of satisfaction, and the independent variables were components of the e-mail addresses. The main results indicate that for a recall task, significantly lower total performance time (26.2%) and error rate (75%) were found for the hybrid formats (digits and letters) than for the letter format, and up to four characters was the best single domain length. For an information association task, embedding both geographical and organizational information significantly decreased the response time (10.9%) in comparison with only embedding organizational information. For a categorization task, embedding both geographical information and organizational information significantly decreased response time (40.7%) in comparison with only embedding organizational information. This research demonstrates the importance of human-centred design and provides guidelines in effectively designing e-mail addresses.

  10. Roadmap on optical sensors

    Science.gov (United States)

    Ferreira, Mário F. S.; Castro-Camus, Enrique; Ottaway, David J.; López-Higuera, José Miguel; Feng, Xian; Jin, Wei; Jeong, Yoonchan; Picqué, Nathalie; Tong, Limin; Reinhard, Björn M.; Pellegrino, Paul M.; Méndez, Alexis; Diem, Max; Vollmer, Frank; Quan, Qimin

    2017-08-01

    Sensors are devices or systems able to detect, measure and convert magnitudes from any domain to an electrical one. Using light as a probe for optical sensing is one of the most efficient approaches for this purpose. The history of optical sensing using some methods based on absorbance, emissive and florescence properties date back to the 16th century. The field of optical sensors evolved during the following centuries, but it did not achieve maturity until the demonstration of the first laser in 1960. The unique properties of laser light become particularly important in the case of laser-based sensors, whose operation is entirely based upon the direct detection of laser light itself, without relying on any additional mediating device. However, compared with freely propagating light beams, artificially engineered optical fields are in increasing demand for probing samples with very small sizes and/or weak light-matter interaction. Optical fiber sensors constitute a subarea of optical sensors in which fiber technologies are employed. Different types of specialty and photonic crystal fibers provide improved performance and novel sensing concepts. Actually, structurization with wavelength or subwavelength feature size appears as the most efficient way to enhance sensor sensitivity and its detection limit. This leads to the area of micro- and nano-engineered optical sensors. It is expected that the combination of better fabrication techniques and new physical effects may open new and fascinating opportunities in this area. This roadmap on optical sensors addresses different technologies and application areas of the field. Fourteen contributions authored by experts from both industry and academia provide insights into the current state-of-the-art and the challenges faced by researchers currently. Two sections of this paper provide an overview of laser-based and frequency comb-based sensors. Three sections address the area of optical fiber sensors, encompassing both

  11. Addressing the Issue: Bullying and LGBTQ Youth

    Directory of Open Access Journals (Sweden)

    Kimberly Allen

    2014-09-01

    Full Text Available Each day, thousands of youth experience bullying and as many of 70% of all youth report having experienced bullying, either directly or indirectly (Cantor, 2005. For Gay, Lesbian, Bi-sexual, Transgender and Questioning (LGBTQ youth, the chances of experiencing bullying are much higher than for youth in the general population (Russell, Horn, Kosciw, & Saewyc, 2010. Although many youth serving organizations have begun to address the issue of bullying with bullying prevention programs, there is a deficit of information and a lack of inclusion of prevention efforts that specifically address LGBTQ youth. This article address the role of youth organizations in creating safe and inclusive environments for all youth, with specific attention paid to resources and strategies for inclusive environments for LGBTQ youth.

  12. Modern optics

    CERN Document Server

    Guenther, B D

    2015-01-01

    Modern Optics is a fundamental study of the principles of optics using a rigorous physical approach based on Maxwell's Equations. The treatment provides the mathematical foundations needed to understand a number of applications such as laser optics, fiber optics and medical imaging covered in an engineering curriculum as well as the traditional topics covered in a physics based course in optics. In addition to treating the fundamentals in optical science, the student is given an exposure to actual optics engineering problems such as paraxial matrix optics, aberrations with experimental examples, Fourier transform optics (Fresnel-Kirchhoff formulation), Gaussian waves, thin films, photonic crystals, surface plasmons, and fiber optics. Through its many pictures, figures, and diagrams, the text provides a good physical insight into the topics covered. The course content can be modified to reflect the interests of the instructor as well as the student, through the selection of optional material provided in append...

  13. Catching Attention in Fiber Optics Class

    OpenAIRE

    Kezerashvili, R. Ya.; Leng, L

    2004-01-01

    Following a brief review on the history and the current development of fiber optics, the significance of teaching fiber optics for science and non-science major college students is addressed. Several experimental demonstrations designed to aid the teaching and learning process in fiber optics lectures are presented. Sample laboratory projects are also proposed to help the students to understand the physical principles of fiber optics.

  14. Strategies for Addressing Spreadsheet Compliance Challenges

    CERN Document Server

    Weber, Brandon

    2006-01-01

    Most organizations today use spreadsheets in some form or another to support critical business processes. However the financial resources, and developmental rigor dedicated to them are often minor in comparison to other enterprise technology. The increasing focus on achieving regulatory and other forms of compliance over key technology assets has made it clear that organizations must regard spreadsheets as an enterprise resource and account for them when developing an overall compliance strategy. This paper provides the reader with a set of practical strategies for addressing spreadsheet compliance from an organizational perspective. It then presents capabilities offered in the 2007 Microsoft Office System which can be used to help customers address compliance challenges.

  15. Welfare work addressing immigrants and refugees

    DEFF Research Database (Denmark)

    Øland, Trine

    these integrationist visions in their quest to protect immigrants’ and refugees’ fundamental wellbeing and status as human beings with equal rights, group life and history. These opposing elements generate ambiguity and contradiction within integrationist welfare work. The ambition of the presentation is to enquire......In this presentation I will discuss the ways in which welfare workers addressing immigrants and refugees (re)produce integrationist visions, symbolizing society as an integrated whole and immigrants/refugees as a distraction to that whole. Paradoxically, welfare workers also oppose......, nurses and more) addressing immigrants and refugees and their families and descendants in the Danish welfare nation-state....

  16. Shared address collectives using counter mechanisms

    Science.gov (United States)

    Blocksome, Michael; Dozsa, Gabor; Gooding, Thomas M; Heidelberger, Philip; Kumar, Sameer; Mamidala, Amith R; Miller, Douglas

    2014-02-18

    A shared address space on a compute node stores data received from a network and data to transmit to the network. The shared address space includes an application buffer that can be directly operated upon by a plurality of processes, for instance, running on different cores on the compute node. A shared counter is used for one or more of signaling arrival of the data across the plurality of processes running on the compute node, signaling completion of an operation performed by one or more of the plurality of processes, obtaining reservation slots by one or more of the plurality of processes, or combinations thereof.

  17. Addressing techniques of liquid crystal displays

    CERN Document Server

    Ruckmongathan, Temkar N

    2014-01-01

    Unique reference source that can be used from the beginning to end of a design project to aid choosing an appropriate LCD addressing technique for a given application This book will be aimed at design engineers who are likely to embed LCD drivers and controllers in many systems including systems on chip. Such designers face the challenge of making the right choice of an addressing technique that will serve them with best performance at minimal cost and complexity. Readers will be able to learn about various methods available for driving matrix LCDs and the comparisons at the end of each chap

  18. Optic Neuritis

    OpenAIRE

    1989-01-01

    Demyelinating optic neuritis is the most common cause of unilateral painful visual loss in the United States. Although patients presenting with demyelinating optic neuritis have favorable long-term visual prognosis, optic neuritis is the initial clinical manifestation of multiple sclerosis in 20% of patients. The Optic Neuritis Treatment Trial (ONTT) has helped stratify the risk of developing multiple sclerosis after the first episode of optic neuritis based on abnormal findings on brain MRI....

  19. Reflecting telescope optics

    CERN Document Server

    Wilson, Raymond N

    2004-01-01

    R.N. Wilson's two-volume treatise on reflecting telescope optics has become a classic in its own right. It is intended to give a complete treatment of the subject, addressing professionals in research and industry as well as students of astronomy and amateur astronomers. This first volume, Basic Design Theory and its Historical Development, is devoted to the theory of reflecting telescope optics and systematically recounts the historical progress. The author's approach is morphological, with strong emphasis on the historical development. The book is richly illustrated including spot-diagrams a

  20. Transition through Teamwork: Professionals Address Student Access

    Science.gov (United States)

    Bube, Sue Ann; Carrothers, Carol; Johnson, Cinda

    2016-01-01

    Prior to 2013, there was no collaboration around the transition services for deaf and hard of hearing students in Washington State. Washington had numerous agencies providing excellent support, but those agencies were not working together. It was not until January 29, 2013, when pepnet 2 hosted the Building State Capacity to Address Critical…

  1. Rational Rhymes for Addressing Common Childhood Issues

    Science.gov (United States)

    Warren, Jeffrey M.

    2011-01-01

    Music-based interventions are valuable tools counselors can use when working with children. Specific types of music-based interventions, such as songs or rhymes, can be especially pertinent in addressing the thoughts, feelings, and behaviors of children. Rational-emotive behavior therapy (REBT) provides a therapeutic framework that encourages…

  2. Addressing Psychosocial Factors with Library Mentoring

    Science.gov (United States)

    Farrell, Bridget; Alabi, Jaena; Whaley, Pambanisha; Jenda, Claudine

    2017-01-01

    The majority of articles on mentoring in the library and information science field address career development by emphasizing the orientation process for new librarians and building the requisite skills for a specific job. Few articles deal with the psychological and social challenges that many early-career and minority librarians face, which can…

  3. Addressing Issues Related to Technology and Engineering

    Science.gov (United States)

    Technology Teacher, 2008

    2008-01-01

    This article presents an interview with Michael Hacker and David Burghardt, codirectors of Hoftra University's Center for Technological Literacy. Hacker and Burghardt address issues related to technology and engineering. They argue that teachers need to be aware of the problems kids are facing, and how to present these problems in an engaging…

  4. Road Map to Address Cognitive Health

    Centers for Disease Control (CDC) Podcasts

    2014-06-09

    In this podcast, CDC’s Dr. Lynda Anderson highlights the important roles that states and communities can play in addressing cognitive health as part of overall health.  Created: 6/9/2014 by National Center for Chronic Disease Prevention and Health Promotion (NCCDPHP).   Date Released: 6/9/2014.

  5. Problem Solvers: Solutions--The Inaugural Address

    Science.gov (United States)

    Dause, Emily

    2014-01-01

    Fourth graders in Miss Dause's and Mrs. Hicks's mathematics classes at South Mountain Elementary School in Dillsburg, Pennsylvania, worked with the data from the Inauagural Address problem that was previously published published in the February 2013 issue of "Teaching Children Mathematics". This activity allowed students to showcase…

  6. assessing nutrition intervention programmes that addressed ...

    African Journals Online (AJOL)

    2012-04-02

    Apr 2, 2012 ... address short-term hunger and improve active learning capacity of children in ... evaluation report of 2000 recommended that school feeding should ... were, however, anecdotal accounts of improved school attendance and classroom .... question of what type of food is best suited for the supplementation ...

  7. How Sociology Texts Address Gun Control

    Science.gov (United States)

    Tonso, William R.

    2004-01-01

    William R. Tonso has chosen an issue that he knows something about to examine how sociology textbooks address controversy. Appealing for gun control is fashionable, but it is at odds with a fondness that ordinary Americans have for their firearms--one that is supported by a growing body of research on deterrence to crime. There are two sides to…

  8. Addressing Measurement Issues Related to Bullying Involvement

    Science.gov (United States)

    Casper, Deborah M.; Meter, Diana J.; Card, Noel A.

    2015-01-01

    In this article, we address measurement issues related to select aspects of bullying involvement with the goal of moving psychometrically sound measurement practices toward applied bullying research. We first provide a nontechnical introduction to psychometric considerations in measuring bullying involvement, highlighting the importance of…

  9. Addressing production stops in the food industry

    DEFF Research Database (Denmark)

    Hansen, Zaza Nadja Lee; Herbert, Luke Thomas; Jacobsen, Peter

    2014-01-01

    This paper investigates the challenges in the food industry which causes the production lines to stop, illustrated by a case study of an SME size company in the baked goods sector in Denmark. The paper proposes key elements this sector needs to be aware of to effectively address production stops......, and gives examples of the unique challenges faced by the SME food industry....

  10. Mapping virtual addresses to different physical addresses for value disambiguation for thread memory access requests

    Science.gov (United States)

    Gala, Alan; Ohmacht, Martin

    2014-09-02

    A multiprocessor system includes nodes. Each node includes a data path that includes a core, a TLB, and a first level cache implementing disambiguation. The system also includes at least one second level cache and a main memory. For thread memory access requests, the core uses an address associated with an instruction format of the core. The first level cache uses an address format related to the size of the main memory plus an offset corresponding to hardware thread meta data. The second level cache uses a physical main memory address plus software thread meta data to store the memory access request. The second level cache accesses the main memory using the physical address with neither the offset nor the thread meta data after resolving speculation. In short, this system includes mapping of a virtual address to a different physical addresses for value disambiguation for different threads.

  11. Engineering Optics

    CERN Document Server

    Iizuka, Keigo

    2008-01-01

    Engineering Optics is a book for students who want to apply their knowledge of optics to engineering problems, as well as for engineering students who want to acquire the basic principles of optics. It covers such important topics as optical signal processing, holography, tomography, holographic radars, fiber optical communication, electro- and acousto-optic devices, and integrated optics (including optical bistability). As a basis for understanding these topics, the first few chapters give easy-to-follow explanations of diffraction theory, Fourier transforms, and geometrical optics. Practical examples, such as the video disk, the Fresnel zone plate, and many more, appear throughout the text, together with numerous solved exercises. There is an entirely new section in this updated edition on 3-D imaging.

  12. Image Coding Based on Address Vector Quantization.

    Science.gov (United States)

    Feng, Yushu

    Image coding is finding increased application in teleconferencing, archiving, and remote sensing. This thesis investigates the potential of Vector Quantization (VQ), a relatively new source coding technique, for compression of monochromatic and color images. Extensions of the Vector Quantization technique to the Address Vector Quantization method have been investigated. In Vector Quantization, the image data to be encoded are first processed to yield a set of vectors. A codeword from the codebook which best matches the input image vector is then selected. Compression is achieved by replacing the image vector with the index of the code-word which produced the best match, the index is sent to the channel. Reconstruction of the image is done by using a table lookup technique, where the label is simply used as an address for a table containing the representative vectors. A code-book of representative vectors (codewords) is generated using an iterative clustering algorithm such as K-means, or the generalized Lloyd algorithm. A review of different Vector Quantization techniques are given in chapter 1. Chapter 2 gives an overview of codebook design methods including the Kohonen neural network to design codebook. During the encoding process, the correlation of the address is considered and Address Vector Quantization is developed for color image and monochrome image coding. Address VQ which includes static and dynamic processes is introduced in chapter 3. In order to overcome the problems in Hierarchical VQ, Multi-layer Address Vector Quantization is proposed in chapter 4. This approach gives the same performance as that of the normal VQ scheme but the bit rate is about 1/2 to 1/3 as that of the normal VQ method. In chapter 5, a Dynamic Finite State VQ based on a probability transition matrix to select the best subcodebook to encode the image is developed. In chapter 6, a new adaptive vector quantization scheme, suitable for color video coding, called "A Self -Organizing

  13. Electron optics

    CERN Document Server

    Grivet, Pierre; Bertein, F; Castaing, R; Gauzit, M; Septier, Albert L

    1972-01-01

    Electron Optics, Second English Edition, Part I: Optics is a 10-chapter book that begins by elucidating the fundamental features and basic techniques of electron optics, as well as the distribution of potential and field in electrostatic lenses. This book then explains the field distribution in magnetic lenses; the optical properties of electrostatic and magnetic lenses; and the similarities and differences between glass optics and electron optics. Subsequent chapters focus on lens defects; some electrostatic lenses and triode guns; and magnetic lens models. The strong focusing lenses and pris

  14. Overview of an address and purpose of the workshop [ISO Workshop on address standards: Considering the issues related to an international address standard

    CSIR Research Space (South Africa)

    Cooper, Antony K

    2008-05-01

    Full Text Available This workshop was conceived with the aim of discussing what an address actually is and exploring the possibility of developing an international address standard across the various domains that use addresses. This paper attempts to provide...

  15. Characterization of addressability by simultaneous randomized benchmarking

    CERN Document Server

    Gambetta, Jay M; Merkel, S T; Johnson, B R; Smolin, John A; Chow, Jerry M; Ryan, Colm A; Rigetti, Chad; Poletto, S; Ohki, Thomas A; Ketchen, Mark B; Steffen, M

    2012-01-01

    The control and handling of errors arising from cross-talk and unwanted interactions in multi-qubit systems is an important issue in quantum information processing architectures. We introduce a benchmarking protocol that provides information about the amount of addressability present in the system and implement it on coupled superconducting qubits. The protocol consists of randomized benchmarking each qubit individually and then simultaneously, and the amount of addressability is related to the difference of the average gate fidelities of those experiments. We present the results on two similar samples with different amounts of cross-talk and unwanted interactions, which agree with predictions based on simple models for the amount of residual coupling.

  16. Improving student learning by addressing misconceptions

    Science.gov (United States)

    Engelmann, Carol A.; Huntoon, Jacqueline E.

    2011-12-01

    Students—and often those who teach them—come to class with preconceptions and misconceptions that hinder their learning. For instance, many K-12 students and teachers believe groundwater exists in the ground in actual rivers or lakes, but in fact, groundwater is found in permeable rock layers called aquifers. Such misconceptions need to be addressed before students can learn scientific concepts correctly. While other science disciplines have been addressing preconceptions and misconceptions for many years, the geoscience community has only recently begun to concentrate on the impact these have on students' learning. Valuable research is being done that illuminates how geologic thinking evolves from the "novice" to "expert" level. The expert is defined as an individual with deep understanding of Earth science concepts. As research progresses, geoscientists are realizing that correcting preconceptions and misconceptions can move teachers and students closer to the "expert" level [Libarkin, 2005].

  17. World Federation of Vascular Societies: presidential address

    DEFF Research Database (Denmark)

    Sillesen, Henrik Hegaard

    2010-01-01

    The presidential address describes briefly the history of the World Federation for Vascular Societies (WFVS) and its objectives. Vascular Surgery today includes interventional procedures (open surgical and endovascular) in addition to risk factor reduction and medical treatment. It is equally imp...... throughout the world. In addition, for introduction of new treatments, training issues and dissemination of science a global organisation like the WFVS is needed.......The presidential address describes briefly the history of the World Federation for Vascular Societies (WFVS) and its objectives. Vascular Surgery today includes interventional procedures (open surgical and endovascular) in addition to risk factor reduction and medical treatment. It is equally....... Similar, in order to be able to train with relevant case mix and numbers, and in order always to have both complex open and endovascular skills on call 24 hours per day, 365 days a year, centralisation into larger units is necessary. The WFVS is important simply looking at the huge demographic differences...

  18. Forms of Address as Discrete Modal Operators

    Directory of Open Access Journals (Sweden)

    Wojciech Paweł Sosnowski

    2016-12-01

    Full Text Available Forms of Address as Discrete Modal Operators The category of expressions of politeness includes, among others, forms of address. Forms of address express honorification. Honorification can be defined as a special type of meaning that consists of information about the social and interpersonal relations between the speaker and the addressee, the speaker and the hearer, and the speaker and the protagonist of the predication. As far as their place in the syntactic structure is concerned, forms of address can either be integrated with the other elements of a predication or not. However, they are always part of a predication’s semantic structure. Moreover, forms of address convey the speaker’s attitude to the meaning of the predicate that they want to convey, which consequently means that forms of address also carry a modal element. Modality can be defined as a situation in which an individual is in a particular mental state, i.e. exhibits some kind of attitude to a situation or a type of situations. Forms of address can be categorised as modal operators conveying imperatives, requests, suppositions, etc. The term "operator" can be used for a unit of language when it changes the semantic structure of the predication. My research on honorification is mainly based on contemporary corpora, both monolingual and multilingual. In the present study, I analyse forms of address which carry imperative and optative meanings.   Formy adresatywne jako dyskretne operatory modalne W obrębie wyrażeń realizujących funkcje grzecznościowe znajduje się grupa form adresatywnych. Są one częścią kategorii honoryfikatywności rozumianej jako szczególny rodzaj znaczenia zawartego w treści wypowiedzi, informację o towarzysko-społecznej relacji między nadawcą a odbiorcą, nadawcą a słuchaczem oraz nadawcą a bohaterem wypowiedzi. Gramatycznie formy adresatywne mogą być zarówno zintegrowane, jak i niezintegrowane syntaktycznie z resztą wypowiedzi, ale

  19. CANE: The Content Addressed Network Environment

    CERN Document Server

    Gardner-Stephen, Paul

    2007-01-01

    The fragmented nature and asymmetry of local and remote file access and network access, combined with the current lack of robust authenticity and privacy, hamstrings the current internet. The collection of disjoint and often ad-hoc technologies currently in use are at least partially responsible for the magnitude and potency of the plagues besetting the information economy, of which spam and email borne virii are canonical examples. The proposed replacement for the internet, Internet Protocol Version 6 (IPv6), does little to tackle these underlying issues, instead concentrating on addressing the technical issues of a decade ago. This paper introduces CANE, a Content Addressed Network Environment, and compares it against current internet and related technologies. Specifically, CANE presents a simple computing environment in which location is abstracted away in favour of identity, and trust is explicitly defined. Identity is cryptographically verified and yet remains pervasively open in nature. It is argued tha...

  20. Addressing food waste reduction in Denmark

    DEFF Research Database (Denmark)

    Halloran, Afton Marina Szasz; Clement, Jesper; Kornum, Niels

    2014-01-01

    and environmental challenge. Using the case of Denmark, this paper analyses causes of food waste, and discusses how different stakeholders address the prevention and reuse of the €1.18. billion of annual edible food waste. Currently, the majority of food waste is still incinerated with energy recovery. However......Global food demand is driven by population and economic growth, and urbanization. One important instrument to meet this increasing demand and to decrease the pressure on food production is to minimize food losses and food waste. Food waste and loss is a major societal, economic, nutritional......, improvements in technology have made it more efficient to utilize food waste for biogas and compost, which improves nutrient cycling through the food system. Major efforts to address food waste in Denmark have mainly been promoted through civil society groups with governmental support, as well as by industry...

  1. Sending and Addressing Messages in Web Services

    OpenAIRE

    Borkowski, Piotr

    2007-01-01

    This thesis provides an overview of Web Services technology. The concept of Web Services and Service Oriented Architecture are explained. The thesis focuses on the mechanisms for transporting and addressing messages in web services, especially SOAP. It presents the development history of SOAP, an overview of the SOAP 1.2 specification, and the differences between SOAP in version 1.1 and 1.2. Further, the thesis presents two web servers for development and deployment of web services using Java...

  2. Design of an addressable memory controller.

    OpenAIRE

    Ham, Byung Woon.

    1987-01-01

    Approved for public release; distribution in unlimited. The main memory is an essential subsystem in a Von Neumann type of stored program machine. Because of the speed gap existence between the processor and the main memor>% there has been a constant need to improve the main memor\\' to achieve a better throughput. One method is to use a CAM(Content Addressable Memorv'). It is known as a \\ery powerful facility for searching a particular item from a data array rather than from...

  3. Addressing spiritual leadership: an organizational model.

    Science.gov (United States)

    Burkhart, Lisa; Solari-Twadell, P Ann; Haas, Sheila

    2008-01-01

    The Joint Commission requires health systems to address spiritual care. Research indicates that spirituality is associated with better physical, psychological, and social health and that culturally diverse populations and individuals at end-of-life often request spiritual care. The authors report the results of a consensus conference of 21 executives representing 10 large faith-based health systems who discussed the input, process, and outcomes of a corporate model for spiritual leadership. Specific initiatives are highlighted.

  4. Matrix-addressable electrochromic display cell

    Science.gov (United States)

    Beni, G.; Schiavone, L. M.

    1981-04-01

    We report an electrochromic display cell with intrinsic matrix addressability. The cell, based on a sputtered iridium oxide film (SIROF) and a tantalum-oxide hysteretic counterelectrode, has electrochromic parameters (i.e., response times, operating voltages, and contrast) similar to those of other SIROF display devices, but in addition, has short-circuit memory and voltage threshold. Memory and threshold are sufficiently large to allow, in principle, multiplexing of electrochromic display panels of large-screen TV pixel size.

  5. Politeness Strategies in American Presidential Inaugural Addresses

    Institute of Scientific and Technical Information of China (English)

    李立文; 朱琳靓

    2008-01-01

    American presidential inaugural address(PIA)a very important variety with worldwide influence and long-lasting significance.Its main task and purpose is to outline the main policies of the new government and win people's support.However.the prerequisite of winning people's sympathy and support lies in people's good relationship with and trust in the government.Therefore almost all the speakers resort to"approached-based" positive politeness strategy quite often which performs this function very well.

  6. Forest Policies Addressing Climate Change in China

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    As a developing country with a large population and a fragile ecological environment, China is particularly vulnerable to the adverse effects of climate change. Beginning with the Rio Conference of 1992 China has played a progressively enhanced role in combating climate change. A series of policies and measures to address climate change have been taken in the overall context of national sustainable development strategy, making positive contributions to the mitigation and adaptation to climate change, among ...

  7. Matching Alternative Addresses: a Semantic Web Approach

    Science.gov (United States)

    Ariannamazi, S.; Karimipour, F.; Hakimpour, F.

    2015-12-01

    Rapid development of crowd-sourcing or volunteered geographic information (VGI) provides opportunities for authoritatives that deal with geospatial information. Heterogeneity of multiple data sources and inconsistency of data types is a key characteristics of VGI datasets. The expansion of cities resulted in the growing number of POIs in the OpenStreetMap, a well-known VGI source, which causes the datasets to outdate in short periods of time. These changes made to spatial and aspatial attributes of features such as names and addresses might cause confusion or ambiguity in the processes that require feature's literal information like addressing and geocoding. VGI sources neither will conform specific vocabularies nor will remain in a specific schema for a long period of time. As a result, the integration of VGI sources is crucial and inevitable in order to avoid duplication and the waste of resources. Information integration can be used to match features and qualify different annotation alternatives for disambiguation. This study enhances the search capabilities of geospatial tools with applications able to understand user terminology to pursuit an efficient way for finding desired results. Semantic web is a capable tool for developing technologies that deal with lexical and numerical calculations and estimations. There are a vast amount of literal-spatial data representing the capability of linguistic information in knowledge modeling, but these resources need to be harmonized based on Semantic Web standards. The process of making addresses homogenous generates a helpful tool based on spatial data integration and lexical annotation matching and disambiguating.

  8. Addressing language barriers to healthcare in India.

    Science.gov (United States)

    Narayan, Lalit

    2013-01-01

    In spite of a growing recognition of the importance of doctor-patient communication, the issue of language barriers to healthcare has received very little attention in India. The Indian population speaks over 22 major languages with English used as the lingua franca for biomedicine. Large-scale internal migration has meant that health workers are encountering increasing instances of language discordance within clinical settings. Research done predominantly in the West has shown language discordance to significantly affect access to care, cause problems of comprehension and adherence, and decrease the satisfaction and quality of care. Addressing language barriers to healthcare in India requires a stronger political commitment to providing non-discriminatory health services, especially to vulnerable groups such as illiterate migrant workers. Research will have to address three broad areas: the ways in which language barriers affect health and healthcare, the efficacy of interventions to overcome language barriers, and the costs of language barriers and efforts to overcome them. There is a need to address such barriers in health worker education and clinical practice. Proven strategies such as hiring multilingual healthcare workers, providing language training to health providers, employing in situ translators or using telephone interpretation services will have to be evaluated for their appropriateness to the Indian context. Internet-based initiatives, the proliferation of mobile phones and recent advances in machine translation promise to contribute to the solution. Copyright 2013, NMJI.

  9. Optical Solitons

    Science.gov (United States)

    Taylor, J. R.

    2005-08-01

    1. Optical solitons in fibres: theoretical review A. Hasegawa; 2. Solitons in optical fibres: an experimental account L. F. Mollenauer; 3. All-optical long-distance soliton-based transmission systems K. Smith and L. F. Mollenauer; 4. Nonlinear propagation effects in optical fibres: numerical studies K. J. Blow and N. J. Doran; 5. Soliton-soliton interactions C. Desem and P. L. Chu; 6. Soliton amplification in erbium-doped fibre amplifiers and its application to soliton communication M. Nakazawa; 7. Nonlinear transformation of laser radiation and generation of Raman solitons in optical fibres E. M. Dianov, A. B. Grudinin, A. M. Prokhorov and V. N. Serkin; 8. Generation and compression of femtosecond solitons in optical fibers P. V. Mamyshev; 9. Optical fibre solitons in the presence of higher order dispersion and birefringence C. R. Menyuk and Ping-Kong A. Wai; 10. Dark optical solitons A. M. Weiner; 11. Soliton Raman effects J. R. Taylor; Bibliography; Index.

  10. Quantum enhanced optical sensing

    DEFF Research Database (Denmark)

    Schäfermeier, Clemens

    The work in this thesis is embedded in the framework of quantum metrology and explores quantum effects in solid state emitters and optical sensing. Specifically, the thesis comprises studies on silicon vacancy centres in nanodiamonds, phase measurements and cavity optomechanics utilising optical...... squeezed states, and a theoretical study on quantum amplifiers. Due to its similarity to single atoms, colour centres in diamond are ideal objects for exploring and exploiting quantum effects, because they are comparably easy to produce, probe and maintain. While nitrogen vacancy centres are the most...... identified spectral diffusion as the main hindrance in extending spin coherence times. Overcoming this issue will provide a promising candidate as an emitter for quantum information. Next, the question of how squeezed states of light can improve optical sensing was addressed. For this purpose, a squeezed...

  11. Optical Fiber Fusion Splicing

    CERN Document Server

    Yablon, Andrew D

    2005-01-01

    This book is an up-to-date treatment of optical fiber fusion splicing incorporating all the recent innovations in the field. It provides a toolbox of general strategies and specific techniques that the reader can apply when optimizing fusion splices between novel fibers. It specifically addresses considerations important for fusion splicing of contemporary specialty fibers including dispersion compensating fiber, erbium-doped gain fiber, polarization maintaining fiber, and microstructured fiber. Finally, it discusses the future of optical fiber fusion splicing including silica and non-silica based optical fibers as well as the trend toward increasing automation. Whilst serving as a self-contained reference work, abundant citations from the technical literature will enable readers to readily locate primary sources.

  12. Optical biosensors

    OpenAIRE

    Damborský, Pavel; Švitel, Juraj; Katrlík, Jaroslav

    2016-01-01

    Optical biosensors represent the most common type of biosensor. Here we provide a brief classification, a description of underlying principles of operation and their bioanalytical applications. The main focus is placed on the most widely used optical biosensors which are surface plasmon resonance (SPR)-based biosensors including SPR imaging and localized SPR. In addition, other optical biosensor systems are described, such as evanescent wave fluorescence and bioluminescent optical fibre biose...

  13. Optical keyboard

    Science.gov (United States)

    Veligdan, James T.; Feichtner, John D.; Phillips, Thomas E.

    2001-01-01

    An optical keyboard includes an optical panel having optical waveguides stacked together. First ends of the waveguides define an inlet face, and opposite ends thereof define a screen. A projector transmits a light beam outbound through the waveguides for display on the screen as a keyboard image. A light sensor is optically aligned with the inlet face for sensing an inbound light beam channeled through the waveguides from the screen upon covering one key of the keyboard image.

  14. Optical highlighter molecules in neurobiology.

    Science.gov (United States)

    Datta, Sandeep Robert; Patterson, George H

    2012-02-01

    The development of advanced optical methods has played a key role in propelling progress in neurobiology. Genetically-encoded fluorescent molecules found in nature have enabled labeling of individual neurons to study their physiology and anatomy. Here we discuss the recent use of both native and synthetic optical highlighter proteins to address key problems in neurobiology, including questions relevant to synaptic function, neuroanatomy, and the organization of neural circuits.

  15. MATCHING ALTERNATIVE ADDRESSES: A SEMANTIC WEB APPROACH

    Directory of Open Access Journals (Sweden)

    S. Ariannamazi

    2015-12-01

    Full Text Available Rapid development of crowd-sourcing or volunteered geographic information (VGI provides opportunities for authoritatives that deal with geospatial information. Heterogeneity of multiple data sources and inconsistency of data types is a key characteristics of VGI datasets. The expansion of cities resulted in the growing number of POIs in the OpenStreetMap, a well-known VGI source, which causes the datasets to outdate in short periods of time. These changes made to spatial and aspatial attributes of features such as names and addresses might cause confusion or ambiguity in the processes that require feature’s literal information like addressing and geocoding. VGI sources neither will conform specific vocabularies nor will remain in a specific schema for a long period of time. As a result, the integration of VGI sources is crucial and inevitable in order to avoid duplication and the waste of resources. Information integration can be used to match features and qualify different annotation alternatives for disambiguation. This study enhances the search capabilities of geospatial tools with applications able to understand user terminology to pursuit an efficient way for finding desired results. Semantic web is a capable tool for developing technologies that deal with lexical and numerical calculations and estimations. There are a vast amount of literal-spatial data representing the capability of linguistic information in knowledge modeling, but these resources need to be harmonized based on Semantic Web standards. The process of making addresses homogenous generates a helpful tool based on spatial data integration and lexical annotation matching and disambiguating.

  16. Grid Added Value to Address Malaria

    CERN Document Server

    Breton, V; Hofmann, M

    2008-01-01

    Through this paper, we call for a distributed, internet-based collaboration to address one of the worst plagues of our present world, malaria. The spirit is a non-proprietary peer-production of information-embedding goods. And we propose to use the grid technology to enable such a world wide "open source" like collaboration. The first step towards this vision has been achieved during the summer on the EGEE grid infrastructure where 46 million ligands were docked for a total amount of 80 CPU years in 6 weeks in the quest for new drugs.

  17. A Task Force to Address Bullying.

    Science.gov (United States)

    Keller, Ronald; Budin, Wendy C; Allie, Tammy

    2016-02-01

    Bullying in the workplace can create a dysfunctional environment that is associated with serious physical and psychological harm to the person being bullied. Nurses' experience with bullying has gained considerable attention in recent years, and warrants further discussion. Nurse leaders need to develop and implement effective bullying prevention initiatives that will foster the functioning of a professional and productive staff in a healthy work environment. The aim of this article is to review workplace bullying as experienced by nurses, and describe how nurses at a Magnet-designated academic medical center developed and implemented a bullying task force to address the problem.

  18. ADDRESSING THE RISKS OF GLOBAL PRODUCT DEVELOPMENT

    DEFF Research Database (Denmark)

    Hansen, Zaza Nadja Lee; Ahmed-Kristensen, Saeema

    2011-01-01

    Offshoring various stages in the product development process – from engineering tasks like R&D and design to manufacturing activities - can impact the development process, the product and the organisation. Some of these impacts are positive while some are negative. The negative impacts are related...... to rework, misunderstandings, miscommunication and lower quality. This paper investigates how the organisation can reduce the negative aspects of offshoring by presenting two possible approaches; one which lessens the exposure to situations in which these negative impacts happen and another which addresses...

  19. HEP technologies to address medical imaging challenges

    CERN Document Server

    CERN. Geneva

    2016-01-01

    Developments in detector technologies aimed at solving challenges in present and future CERN experiments, particularly at the LHC, have triggered exceptional advances in the performance of medical imaging devices, allowing for a spectacular progress in in-vivo molecular imaging procedures, which are opening the way for tailored therapies of major diseases. This talk will briefly review the recent history of this prime example of technology transfer from HEP experiments to society, will describe the technical challenges being addressed by some ongoing projects, and will present a few new ideas for further developments and their foreseeable impact.

  20. Panels and Lectures Address China Controversies

    Directory of Open Access Journals (Sweden)

    Video Resources

    2010-04-01

    Full Text Available Editors note: Over the past several months, colleagues have brought to our attention three public panel discussions and lectures that address contemporary controversies in Chinese studies. These discussions have been video-recorded and are available to view on the internet. These presentations may be useful either for scholarly pursuits or may be excerpted for classroom viewing. We wish to thank those who contacted us about these resources, and we encourage readers who know of other such video resources to let us know about them so that we can inform our ASIANetwork colleagues of their existence and availability.

  1. Optical interconnects

    CERN Document Server

    Chen, Ray T

    2006-01-01

    This book describes fully embedded board level optical interconnect in detail including the fabrication of the thin-film VCSEL array, its characterization, thermal management, the fabrication of optical interconnection layer, and the integration of devices on a flexible waveguide film. All the optical components are buried within electrical PCB layers in a fully embedded board level optical interconnect. Therefore, we can save foot prints on the top real estate of the PCB and relieve packaging difficulty reduced by separating fabrication processes. To realize fully embedded board level optical

  2. Optical fibres

    CERN Document Server

    Geisler, J; Boutruche, J P

    1986-01-01

    Optical Fibers covers numerous research works on the significant advances in optical fibers, with particular emphasis on their application.This text is composed of three parts encompassing 15 chapters. The first part deals with the manufacture of optical fibers and the materials used in their production. The second part describes optical-fiber connectors, terminals and branches. The third part is concerned with the major optoelectronic components encountered in optical-communication systems.This book will be of value to research scientists, engineers, and patent workers.

  3. Nonlinear optics

    CERN Document Server

    Boyd, Robert W

    2013-01-01

    Nonlinear Optics is an advanced textbook for courses dealing with nonlinear optics, quantum electronics, laser physics, contemporary and quantum optics, and electrooptics. Its pedagogical emphasis is on fundamentals rather than particular, transitory applications. As a result, this textbook will have lasting appeal to a wide audience of electrical engineering, physics, and optics students, as well as those in related fields such as materials science and chemistry.Key Features* The origin of optical nonlinearities, including dependence on the polarization of light* A detailed treatment of the q

  4. Reconfigurable optical switches with monolithic electrical-to-optical interfaces

    Energy Technology Data Exchange (ETDEWEB)

    Cheng, J.; Zhou, P. [New Mexico Univ., Albuquerque, NM (United States). Center for High Technology Materials; Zolper, J.C.; Lear, K.L.; Vawter, G.A. [Sandia National Labs., Albuquerque, NM (United States); Leibenguth, R.E.; Adams, A.C. [AT and T Bell Labs., Breinigsville, PA (United States)

    1994-03-01

    Vertical cavity surface-emitting lasers (VCSELs) can be integrated with heterojunction phototransistors (HPTs) and heterojunction bipolar transistors (HBTs) on the same wafer to form high speed optical and optoelectronic switches, respectively, that can be optically or electrically addressed. This permits the direct communication and transmission of data between distributed electronic processors through an optical switching network. The experimental demonstration of an integrated optoelectronic HBT/VCSEL switch combining a GaAs/AlGaAs heterojunction bipolar transistor (HBT) with a VCSEL is described below, using the same epilayer structure upon which binary HPT/VCSEL optical switches are also built. The monolithic HBT/VCSEL switch has high current gain, low power dissipation, and a high optical to electrical conversion efficiency. Its modulation has been measured and modeled.

  5. Small-angle X-ray scattering at high brilliance european synchrotrons for biotechnology and nano-technology

    Energy Technology Data Exchange (ETDEWEB)

    Svergun, D.; Malfois, M. [EMBL c/o DESY, Hamburg (Germany); Svergun, D. [Institute of Crystallography, Russian Academy of Sciences, Moscow (Russian Federation); Douka, M. [Commission Europeenne, DG III, Bruxelles (Belgium); Riekel, Ch. [European Synchrotron Radiation Facility (ESRF), 38 - Grenoble (France); Perez, J. [Soleil, 91 - Saclay (France); Roessle, M. [European Molecular Biology Laboratory (EMBL), 38 - Grenoble (France); Amenitsch, H. [IBN/Elettra (Germany); Gunter Grossman, J. [Daresbury Synchrotron Radiation Source (SRS) (United Kingdom); Vestergaard, B. [University of Pharmaceutical Sciences, Copenhagen (Denmark); Receveur-Brechot, V. [Centre National de la Recherche Scientifique (CNRS/AFMB), 13 - Marseille (France); Roth, St.V. [Deutsches Elektronen Synchrotron (HASYLAB), Hamburg (Germany); Ferrari, E. [National Institute for the Physics of Matter (CNR-INFM), Trieste (Italy)

    2007-07-01

    Different issues such as micro-fluidic devices for SAXS (small-angle X-ray diffraction), the use of electro-spray and ion trapping for SAXS in the gas phase, the study of flexible and disordered proteins through SAXS, the time-resolved SAXS studies in solution, or the study of nano-structured soft materials, were addressed in this workshop. This document gathers the transparencies of the presentations.

  6. Addressing firefighter safety around solar PV systems

    Energy Technology Data Exchange (ETDEWEB)

    Harris, B. [Sustainable Energy Technologies, Calgary, AB (Canada)

    2010-11-15

    The article discussed new considerations for installing photovoltaic (PV) systems that address the needs of fire service personnel. The presence of a PV system presents a multitude of dangers for firefighters, including electrical shock, the inhalation of toxic gases from being unable to cut a hole through the roof, falling debris and flying glass, and dead loading on a compromised structure and tripping on conduits. Mapping systems should be modified so that buildings with PV systems are identified for first responders, including firefighters who should learn that solar modules present an electrical hazard during the day but not at night; covering PV modules with foam or salvage covers may not shut the system down to a safe level; it takes a few moments for the power in PV modules to reduce to zero; and PV modules or conduit should never be cut, broke, chopped, or walked upon. The California Department of Forestry and Fire Protection recommends creating pathways and allowing easier access to the roof by setting the modules back from roof edges, creating a structurally sound pathway for firefighters to walk on and space to cut ventilation holes. However, the setback rule makes the economics of solar installation less viable for residential applications. The technological innovations aimed at addressing system safety all focus on limiting firefighter contact with live electrical components to within the extra-low-voltage (ELV) band. Some of the inverters on the market that support ELV system architecture were described. 1 fig.

  7. E-beam addressed Spatial Light Modulator employing electron trapping materials. Phase 1

    Science.gov (United States)

    Lu, Xiaojing; Yang, Xiangyang; Wrigley, Charles Y.; Bradley, Richard; Meszaros, Janos

    1995-03-01

    Spatial light modulators (SLM's) play a critically important role in optical signal processing and optical computing. A novel electron beam addressed emissive SLM which combines high performance polycrystalline electron trapping (ET) materials with an advanced field-emitter array is being developed. The proposed SLM combines high resolution (greater than 100 lplmm), high SBP (greater than 1000 x 1000), high frame rate (greater than or equal 1 KHz), high contrast ratio (greater than l03:l) and low drive voltage (less than 15 V) in a single device. The additional features of the proposed SLM are its wide variety of operation modes and electrical and optical dual-addressability. Such a SLM, if successfully developed, will surely have substantial impact on optical processing technology. During the Phase-1 efforts, a review of field emitter arrays has been done to show that it has the merits of electrical-addressability, high space-bandwidth product (SBP), low drive voltage compatible with IC driving circuitry, and high update speed. The device architecture has been investigated and the design of two prototype devices has been provided.

  8. Applied optics and optical design

    CERN Document Server

    Conrady, A E

    2011-01-01

    ""For the optical engineer it is an indispensable work."" - Journal, Optical Society of America""As a practical guide this book has no rival."" - Transactions, Optical Society""A noteworthy contribution,"" - Nature (London)Part I covers all ordinary ray-tracing methods, together with the complete theory of primary aberrations and as much of higher aberration as is needed for the design of telescopes, low-power microscopes and simple optical systems. Chapters: Fundamental Equations, Spherical Aberration, Physical Aspect of Optical Images, Chromatic Aberration, Design of Achromatic Object-Glass

  9. Address Forms in Chinese and English-Speaking Culture

    Institute of Scientific and Technical Information of China (English)

    王晓茹

    2015-01-01

    Address forms is one of markers of politeness and is an indispensable part of communication. An appropriate address form promotes interpersonal communication smoothly. An address form is polite in one culture, but might be inappropriate in an⁃other culture. The paper contrasts address forms in English and Chinese culture and explores the reasons for their different choice of address terms.

  10. GIS-based geocoding methods for area-based addresses and 3D addresses in urban areas

    OpenAIRE

    Jiyeong Lee

    2009-01-01

    For more than four decades, two address-matching methods, the street-based address geocoding method and address-point-matching method, have been used to identify geographical coordinates from postal addresses. However, street-based address geocoding methods developed for the US addressing system are not universally applicable in developing a single-portal geocoding middleware for worldwide Internet-based geographic information systems applications. Problems also exist with address-point match...

  11. Adresse inconnue / Address unknown / Suchwiin Bulmyeong

    Directory of Open Access Journals (Sweden)

    Serge Gruzinski

    2005-03-01

    Full Text Available Tous les films asiatiques parlent de métissage, même ceux qui se présentent comme de vastes fresques historiques perdues dans le temps. Les emprunts aux traditions hollywoodiennes et européennes n'ont cessé d'enrichir une cinématographie aussi ancienne que celle du monde occidental. Dans Adresse inconnue (Address unknown le cinéaste coréen Kim Ki-duk explore l'expérience du métissage et le corps du métis à la frontière entre Corée du Nord et Corée du sud. Fils d'un GI américain et noir et d...

  12. Validation of Housing Standards Addressing Accessibility

    DEFF Research Database (Denmark)

    Helle, Tina

    2013-01-01

    The aim was to explore the use of an activity-based approach to determine the validity of a set of housing standards addressing accessibility. This included examination of the frequency and the extent of accessibility problems among older people with physical functional limitations who used...... participant groups were examined. Performing well-known kitchen activities was associated with accessibility problems for all three participant groups, in particular those using a wheelchair. The overall validity of the housing standards examined was poor. Observing older people interacting with realistic...... no mobility device (n = 10) or who used a wheelchair (n = 10) or a rollator (n = 10). The setting was a kitchen designed according to present housing standards. The participants prepared lunch in the kitchen. Accessibility problems were assessed by observation and self-report. Differences between the three...

  13. Professional Culture and Climate: Addressing Unconscious Bias

    Science.gov (United States)

    Knezek, Patricia

    2016-10-01

    Unconscious bias reflects expectations or stereotypes that influence our judgments of others (regardless of our own group). Everyone has unconscious biases. The end result of unconscious bias can be an accumulation of advantage or disadvantage that impacts the long term career success of individuals, depending on which biases they are subject to. In order to foster a professional culture and climate, being aware of these unconscious biases and mitigating against them is a first step. This is particularly important when judgements are needed, such as in cases for recruitment, choice of speakers for conferences, and even reviewing papers submitted for publication. This presentation will cover how unconscious bias manifests itself, what evidence exists to demonstrate it exists, and ways it can be addressed.

  14. Library outreach: addressing Utah's "Digital Divide".

    Science.gov (United States)

    McCloskey, K M

    2000-10-01

    A "Digital Divide" in information and technological literacy exists in Utah between small hospitals and clinics in rural areas and the larger health care institutions in the major urban area of the state. The goals of the outreach program of the Spencer S. Eccles Health Sciences Library at the University of Utah address solutions to this disparity in partnership with the National Network of Libraries of Medicine-- Midcontinental Region, the Utah Department of Health, and the Utah Area Health Education Centers. In a circuit-rider approach, an outreach librarian offers classes and demonstrations throughout the state that teach information-access skills to health professionals. Provision of traditional library services to unaffiliated health professionals is integrated into the library's daily workload as a component of the outreach program. The paper describes the history, methodology, administration, funding, impact, and results of the program.

  15. Advancing efforts to address youth violence involvement.

    Science.gov (United States)

    Weist, M D; Cooley-Quille, M

    2001-06-01

    Discusses the increased public attention on violence-related problems among youth and the concomitant increased diversity in research. Youth violence involvement is a complex construct that includes violence experienced in multiple settings (home, school, neighborhood) and in multiple forms (as victims, witnesses, perpetrators, and through family members, friends, and the media). Potential impacts of such violence involvement are considerable, including increased internalizing and externalizing behaviors among youth and future problems in school adjustment and life-course development. This introductory article reviews key dimensions of youth-related violence, describes an American Psychological Association Task Force (Division 12) developed to advance relevant research, and presents examples of national resources and efforts that attempt to address this critical public health issue.

  16. Addressing submarine geohazards through scientific drilling

    Science.gov (United States)

    Camerlenghi, A.

    2009-04-01

    Natural submarine geohazards (earthquakes, volcanic eruptions, landslides, volcanic island flank collapses) are geological phenomena originating at or below the seafloor leading to a situation of risk for off-shore and on-shore structures and the coastal population. Addressing submarine geohazards means understanding their spatial and temporal variability, the pre-conditioning factors, their triggers, and the physical processes that control their evolution. Such scientific endeavour is nowadays considered by a large sector of the international scientific community as an obligation in order to contribute to the mitigation of the potentially destructive societal effects of submarine geohazards. The study of submarine geohazards requires a multi-disciplinary scientific approach: geohazards must be studied through their geological record; active processes must be monitored; geohazard evolution must be modelled. Ultimately, the information must be used for the assessment of vulnerability, risk analysis, and development of mitigation strategies. In contrast with the terrestrial environment, the oceanic environment is rather hostile to widespread and fast application of high-resolution remote sensing techniques, accessibility for visual inspection, sampling and installation of monitoring stations. Scientific Drilling through the IODP (including the related pre site-survey investigations, sampling, logging and in situ measurements capability, and as a platform for deployment of long term observatories at the surface and down-hole) can be viewed as the centre of gravity of an international, coordinated, multi-disciplinary scientific approach to address submarine geohazards. The IODP Initial Science Plan expiring in 2013 does not address openly geohazards among the program scientific objectives. Hazards are referred to mainly in relation to earthquakes and initiatives towards the understanding of seismogenesis. Notably, the only drilling initiative presently under way is the

  17. Discurso de paraninfo Guest speaker's address

    Directory of Open Access Journals (Sweden)

    José Carlos Bruni

    2002-01-01

    Full Text Available O presente texto é o discurso de paraninfo pronunciado para os formandos da turma de 2001 da Faculdade de Filosofia e Ciências da Universidade Estadual Paulista, Campus de Marília/SP. Constitui-se em pequena reflexão sobre o momento da formatura, a passagem para a vida profissional e os problemas mais candentes que a vida acadêmica enfrenta hoje no Brasil.This is the text of the guest speaker's address given on the graduation ceremony of the 2001 class at the Faculdade de Filosofia e Ciências da Universidade Estadual Paulista at Marília/São Paulo. It consists in a brief reflection about the moment of graduation, the passage to professional life and the most serious problems of academic life today in Brazil.

  18. Addressing consumerization of IT risks with nudging

    Directory of Open Access Journals (Sweden)

    Iryna Yevseyeva

    2015-01-01

    Full Text Available In this work we address the main issues of Information Technology (IT consumerization that are related to security risks, and vulnerabilities of devices used within Bring Your Own Device (BYOD strategy in particular. We propose a ‘soft’ mitigation strategy for user actions based on nudging, widely applied to health and social behavior influence. In particular, we propose a complementary, less strict, more flexible Information Security policies, based on risk assessment of device vulnerabilities and threats to corporate data and devices, combined with a strategy of influencing security behavior by nudging. We argue that nudging, by taking into account the context of the decision-making environment, and the fact that the employee may be in better position to make a more appropriate decision, may be more suitable than strict policies in situations of uncertainty of security-related decisions. Several examples of nudging are considered for different tested and potential scenarios in security context.

  19. Optical communication components

    Science.gov (United States)

    Eldada, Louay

    2004-03-01

    We review and contrast key technologies developed to address the optical components market for communication applications. We first review the component requirements from a network perspective. We then look at different material systems, compare their properties, and describe the functions achieved to date in each of them. The material systems reviewed include silica fiber, silica on silicon, silicon on insulator, silicon oxynitride, sol-gels, polymers, thin-film dielectrics, lithium niobate, indium phosphide, gallium arsenide, magneto-optic materials, and birefringent crystals. We then describe the most commonly used classes of optical device technology and present their pros and cons as well as the functions achieved to date in each of them. The technologies reviewed include passive, actuation, and active technologies. The passive technologies described include fused fibers, dispersion-compensating fiber, beam steering, Bragg gratings, diffraction gratings, holographic elements, thin-film filters, photonic crystals, microrings, and birefringent elements. The actuation technologies include thermo-optics, electro-optics, acousto-optics, magneto-optics, electroabsorption, liquid crystals, total internal reflection technologies, and mechanical actuation. The active technologies include heterostructures, quantum wells, rare-earth doping, dye doping, Raman amplification, and semiconductor amplification. We also investigate the use of different material systems and device technologies to achieve building-block functions, including lasers, amplifiers, detectors, modulators, polarization controllers, couplers, filters, switches, attenuators, isolators, circulators, wavelength converters, chromatic dispersion compensators, and polarization mode dispersion compensators. Some of the technologies presented are well established in the industry and in some cases have reached the commodity stage, others have recently become ready for commercial introduction, while some others

  20. Miniaturised optical sensors for industrial applications

    DEFF Research Database (Denmark)

    Jakobsen, Michael Linde; Hanson, Steen Grüner

    2010-01-01

    When addressing optical sensors for use in e.g. industry, compactness, robustness and performance are essentials. Adhering to these demands, we have developed a suit of compact optical sensors for the specific purposes of measuring angular velocity and linear translations of rigid objects...

  1. Optical properties of graphene antidot lattices

    DEFF Research Database (Denmark)

    Pedersen, Thomas Garm; Flindt, Christian; Pedersen, Jesper Goor

    2008-01-01

    demonstrate that this artificial nanomaterial is a dipole-allowed direct-gap semiconductor with a very pronounced optical-absorption edge. Hence, optical infrared spectroscopy should be an ideal probe of the electronic structure. To address realistic experimental situations, we include effects due to disorder...

  2. 75 FR 41790 - Address Management Services-Elimination of the Manual Card Option for Address Sequencing Services

    Science.gov (United States)

    2010-07-19

    ... 111 Address Management Services--Elimination of the Manual Card Option for Address Sequencing Services... line of ``Address Management Services comments.'' Faxed comments are not accepted. FOR FURTHER... send address cards to the appropriate Address Management Services district office or to the delivery...

  3. Optical electronics

    CERN Document Server

    Yariv, Amnon

    1991-01-01

    This classic text introduces engineering students to the first principles of major phenomena and devices of optoelectronics and optical communication technology. Yariv's "first principles" approach employs real-life examples and extensive problems. The text includes separate chapters on quantum well and semiconductor lasers, as well as phase conjugation and its applications. Optical fiber amplification, signal and noise considerations in optical fiber systems, laser arrays and distributed feedback lasers all are covered extensively in major sections within chapters.

  4. [Optic neuritis].

    Science.gov (United States)

    Wilhelm, H; Heine, C; Tonagel, F

    2014-11-01

    Optic neuritis is a frequent neuro-ophthalmological disease in which the diagnosis can be based on just a few symptoms and findings. It is not only important to differentiate from other optic nerve disorders but also to recognise special types of optic neuritis, which is mostly only possible during the course of the disease. This article presents a review of the current state in diagnosis and therapy from the authors' personal point of view.

  5. Optically excited synapse for neural networks.

    Science.gov (United States)

    Boyd, G D

    1987-07-15

    What can optics with its promise of parallelism do for neural networks which require matrix multipliers? An all optical approach requires optical logic devices which are still in their infancy. An alternative is to retain electronic logic while optically addressing the synapse matrix. This paper considers several versions of an optically addressed neural network compatible with VLSI that could be fabricated with the synapse connection unspecified. This optical matrix multiplier circuit is compared to an all electronic matrix multiplier. For the optical version a synapse consisting of back-to-back photodiodes is found to have a suitable i-v characteristic for optical matrix multiplication (a linear region) plus a clipping or nonlinear region as required for neural networks. Four photodiodes per synapse are required. The strength of the synapse connection is controlled by the optical power and is thus an adjustable parameter. The synapse network can be programmed in various ways such as a shadow mask of metal, imaged mask (static), or light valve or an acoustooptic scanned laser beam or array of beams (dynamic). A milliwatt from LEDs or lasers is adequate power. The neuron has a linear transfer function and is either a summing amplifier, in which case the synapse signal is current, or an integrator, in which case the synapse signal is charge, the choice of which depends on the programming mode. Optical addressing and settling times of microseconds are anticipated. Electronic neural networks using single-value resistor synapses or single-bit programmable synapses have been demonstrated in the high-gain region of discrete single-value feedback. As an alternative to these networks and the above proposed optical synapses, an electronic analog-voltage vector matrix multiplier is considered using MOSFETS as the variable conductance in CMOS VLSI. It is concluded that a shadow mask addressed (static) optical neural network is promising.

  6. The optic nerve head in glaucoma

    Directory of Open Access Journals (Sweden)

    Rupert RA Bourne

    2006-09-01

    Full Text Available ll types of glaucoma involve glaucomatous optic neuropathy. The key to detection and management of glaucoma is understanding how to examine the optic nerve head (ONH. This pictorial glossary addresses the following issues: how to examine the ONH; normal characteristics of the ONH; characteristics of a glaucomatous ONH; how to tell if the glaucomatous optic neuropathy is getting worse;‘pitfalls and pearls’.

  7. Future trends in adaptive Optics

    Science.gov (United States)

    Le Louarn, Miska

    2001-05-01

    In this talk, I will summarize the limitations of current adaptive optics systems (cone effect, anisoplanatism) and I will show what methods can be used to overcome them. I will focus on Multi-Conjugate AO and the polychromatic laser guide star. I will also address AO for Extremely Large Telescopes (ELTs), such as OWL (ESO) and CELT (University of California / Caltech).

  8. Addressing uncertainty in atomistic machine learning

    DEFF Research Database (Denmark)

    Peterson, Andrew A.; Christensen, Rune; Khorshidi, Alireza

    2017-01-01

    Machine-learning regression has been demonstrated to precisely emulate the potential energy and forces that are output from more expensive electronic-structure calculations. However, to predict new regions of the potential energy surface, an assessment must be made of the credibility of the predi......Machine-learning regression has been demonstrated to precisely emulate the potential energy and forces that are output from more expensive electronic-structure calculations. However, to predict new regions of the potential energy surface, an assessment must be made of the credibility...... of the predictions. In this perspective, we address the types of errors that might arise in atomistic machine learning, the unique aspects of atomistic simulations that make machine-learning challenging, and highlight how uncertainty analysis can be used to assess the validity of machine-learning predictions. We...... suggest this will allow researchers to more fully use machine learning for the routine acceleration of large, high-accuracy, or extended-time simulations. In our demonstrations, we use a bootstrap ensemble of neural network-based calculators, and show that the width of the ensemble can provide an estimate...

  9. Programming chemistry in DNA-addressable bioreactors.

    Science.gov (United States)

    Fellermann, Harold; Cardelli, Luca

    2014-10-06

    We present a formal calculus, termed the chemtainer calculus, able to capture the complexity of compartmentalized reaction systems such as populations of possibly nested vesicular compartments. Compartments contain molecular cargo as well as surface markers in the form of DNA single strands. These markers serve as compartment addresses and allow for their targeted transport and fusion, thereby enabling reactions of previously separated chemicals. The overall system organization allows for the set-up of programmable chemistry in microfluidic or other automated environments. We introduce a simple sequential programming language whose instructions are motivated by state-of-the-art microfluidic technology. Our approach integrates electronic control, chemical computing and material production in a unified formal framework that is able to mimic the integrated computational and constructive capabilities of the subcellular matrix. We provide a non-deterministic semantics of our programming language that enables us to analytically derive the computational and constructive power of our machinery. This semantics is used to derive the sets of all constructable chemicals and supermolecular structures that emerge from different underlying instruction sets. Because our proofs are constructive, they can be used to automatically infer control programs for the construction of target structures from a limited set of resource molecules. Finally, we present an example of our framework from the area of oligosaccharide synthesis.

  10. Assessing what to address in science communication

    Science.gov (United States)

    Bruine de Bruin, Wändi; Bostrom, Ann

    2013-01-01

    As members of a democratic society, individuals face complex decisions about whether to support climate change mitigation, vaccinations, genetically modified food, nanotechnology, geoengineering, and so on. To inform people’s decisions and public debate, scientific experts at government agencies, nongovernmental organizations, and other organizations aim to provide understandable and scientifically accurate communication materials. Such communications aim to improve people’s understanding of the decision-relevant issues, and if needed, promote behavior change. Unfortunately, existing communications sometimes fail when scientific experts lack information about what people need to know to make more informed decisions or what wording people use to describe relevant concepts. We provide an introduction for scientific experts about how to use mental models research with intended audience members to inform their communication efforts. Specifically, we describe how to conduct interviews to characterize people’s decision-relevant beliefs or mental models of the topic under consideration, identify gaps and misconceptions in their knowledge, and reveal their preferred wording. We also describe methods for designing follow-up surveys with larger samples to examine the prevalence of beliefs as well as the relationships of beliefs with behaviors. Finally, we discuss how findings from these interviews and surveys can be used to design communications that effectively address gaps and misconceptions in people’s mental models in wording that they understand. We present applications to different scientific domains, showing that this approach leads to communications that improve recipients’ understanding and ability to make informed decisions. PMID:23942122

  11. Addressing uncertainty in atomistic machine learning.

    Science.gov (United States)

    Peterson, Andrew A; Christensen, Rune; Khorshidi, Alireza

    2017-05-10

    Machine-learning regression has been demonstrated to precisely emulate the potential energy and forces that are output from more expensive electronic-structure calculations. However, to predict new regions of the potential energy surface, an assessment must be made of the credibility of the predictions. In this perspective, we address the types of errors that might arise in atomistic machine learning, the unique aspects of atomistic simulations that make machine-learning challenging, and highlight how uncertainty analysis can be used to assess the validity of machine-learning predictions. We suggest this will allow researchers to more fully use machine learning for the routine acceleration of large, high-accuracy, or extended-time simulations. In our demonstrations, we use a bootstrap ensemble of neural network-based calculators, and show that the width of the ensemble can provide an estimate of the uncertainty when the width is comparable to that in the training data. Intriguingly, we also show that the uncertainty can be localized to specific atoms in the simulation, which may offer hints for the generation of training data to strategically improve the machine-learned representation.

  12. Addressing social resistance in emerging security technologies

    Science.gov (United States)

    Mitchener-Nissen, Timothy

    2013-01-01

    In their efforts to enhance the safety and security of citizens, governments and law enforcement agencies look to scientists and engineers to produce modern methods for preventing, detecting, and prosecuting criminal activities. Whole body scanners, lie detection technologies, biometrics, etc., are all being developed for incorporation into the criminal justice apparatus.1 Yet despite their purported security benefits these technologies often evoke social resistance. Concerns over privacy, ethics, and function-creep appear repeatedly in analyses of these technologies. It is argued here that scientists and engineers continue to pay insufficient attention to this resistance; acknowledging the presence of these social concerns yet failing to meaningfully address them. In so doing they place at risk the very technologies and techniques they are seeking to develop, for socially controversial security technologies face restrictions and in some cases outright banning. By identifying sources of potential social resistance early in the research and design process, scientists can both engage with the public in meaningful debate and modify their security technologies before deployment so as to minimize social resistance and enhance uptake. PMID:23970863

  13. The Value of Addressing Patient Preferences.

    Science.gov (United States)

    Allen, Jeff D; Stewart, Mark D; Roberts, Samantha A; Sigal, Ellen V

    2017-02-01

    Recent scientific progress is, in some cases, leading to transformative new medicines for diseases that previously had marginal or even no treatment options. This offers great promise for people affected by these diseases, but it has also placed stress on the health care system in terms of the growing cost associated with some new interventions. Effort has been taken to create tools to help patients and health care providers assess the value of new medical innovations. These tools may also provide the basis for assessing the price associated with new medical products. Given the growing expenditures in health care, value frameworks present an opportunity to evaluate new therapeutic options in the context of other treatments and potentially lead to a more economically sustainable health care system. In summary, the contribution to meaningful improvements in health outcomes is the primary focus of any assessment of the value of a new intervention. A component of such evaluations, however, should factor in timely access to new products that address an unmet medical need, as well as the magnitude of that beneficial impact. To achieve these goals, value assessment tools should allow for flexibility in clinical end points and trial designs, incorporate patient preferences, and continually evolve as new evidence, practice patterns, and medical progress advance.

  14. Addressing Issues for Land Change Science

    Science.gov (United States)

    Braimoh, Ademola; Huang, He Qing

    2009-09-01

    Workshop on Vulnerability and Resilience of Land Systems in Asia; Beijing, China, 15-17 June 2009; There is a growing international community of scholars who work within the interdisciplinary field of land change science, a scientific domain that seeks to understand the dynamics of the land system as a coupled human-environment system. A coupled human-environment system is one in which the social and biophysical subsystems are intertwined so that the system's condition and responses to external forcing are based on the synergy of the two subsystems. Research on land system vulnerability, defined as a function of exposure and sensitivity to natural and anthropogenic perturbations, such as climate variability and sudden changes in macroeconomic conditions and the ability to cope with the impacts of those perturbations, is a fundamental component of land change science. To address issues related to land system vulnerability, the Global Land Project (GLP; http://www.glp-beijing.org.cn/index.php and http://www.glp.hokudai.ac.jp) brought together an interdisciplinary group of researchers with backgrounds ranging from environmental to social sciences. Participants came from both developed and developing countries. The workshop sought to (1) improve knowledge of the causal processes that affect a system's vulnerability and capacity to cope with different perturbations and (2) identify factors that hinder the integration of vulnerability assessment into policies and decision making.

  15. Addressing social resistance in emerging security technologies.

    Science.gov (United States)

    Mitchener-Nissen, Timothy

    2013-01-01

    In their efforts to enhance the safety and security of citizens, governments and law enforcement agencies look to scientists and engineers to produce modern methods for preventing, detecting, and prosecuting criminal activities. Whole body scanners, lie detection technologies, biometrics, etc., are all being developed for incorporation into the criminal justice apparatus. Yet despite their purported security benefits these technologies often evoke social resistance. Concerns over privacy, ethics, and function-creep appear repeatedly in analyses of these technologies. It is argued here that scientists and engineers continue to pay insufficient attention to this resistance; acknowledging the presence of these social concerns yet failing to meaningfully address them. In so doing they place at risk the very technologies and techniques they are seeking to develop, for socially controversial security technologies face restrictions and in some cases outright banning. By identifying sources of potential social resistance early in the research and design process, scientists can both engage with the public in meaningful debate and modify their security technologies before deployment so as to minimize social resistance and enhance uptake.

  16. Fiber optic and laser sensors VII; Proceedings of the Meeting, Boston, MA, Sept. 5-7, 1989

    Science.gov (United States)

    Udd, Eric (Editor); Depaula, Ramon P. (Editor)

    1990-01-01

    Various papers on fiber optic and laser sensors are presented. Individual topics addressed include: fiber optic photoelastic pressure sensor for high-temperature gases, fiber optic gyroscope using an eight-component LiNbO3 integrated optic circuit, design and performance of a fiber optic gyroscope using integrated optics, digital angular position sensor using wavelength division multiplexing, simple repeatable fiber optic intensity sensor for temperature measurement, compensation for effects of ambient temperature on rare-earth-doped fiber optic thermometer.

  17. Address Points - COUNTY_ADDRESS_POINTS_IDHS_IN: Address Points Maintained by County Agencies in Indiana (Indiana Department of Homeland Security, Point Shapefile)

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — COUNTY_ADDRESS_POINTS_IDHS_IN is a point shapefile that contains address points maintained by county agencies in Indiana, provided by personnel of Indiana Department...

  18. Address Points - COUNTY_ADDRESS_POINTS_IDHS_IN: Address Points Maintained by County Agencies in Indiana (Indiana Department of Homeland Security, Point feature class)

    Data.gov (United States)

    NSGIC State | GIS Inventory — COUNTY_ADDRESS_POINTS_IDHS_IN is an ESRI Geodatabase point feature class that contains address points maintained by county agencies in Indiana, provided by personnel...

  19. Optical Detectors

    Science.gov (United States)

    Tabbert, Bernd; Goushcha, Alexander

    Optical detectors are applied in all fields of human activities from basic research to commercial applications in communication, automotive, medical imaging, homeland security, and other fields. The processes of light interaction with matter described in other chapters of this handbook form the basis for understanding the optical detectors physics and device properties.

  20. Optic neuritis

    DEFF Research Database (Denmark)

    Sørensen, Torben Lykke; Roed, H; Sellebjerg, F

    2004-01-01

    To study the involvement of the chemokine receptor CXCR3 and its ligands (CXCL9/Mig, CXCL10/IP-10, CXCL11/ITAC) in optic neuritis (ON).......To study the involvement of the chemokine receptor CXCR3 and its ligands (CXCL9/Mig, CXCL10/IP-10, CXCL11/ITAC) in optic neuritis (ON)....

  1. Optical biosensors

    Science.gov (United States)

    Damborský, Pavel; Švitel, Juraj

    2016-01-01

    Optical biosensors represent the most common type of biosensor. Here we provide a brief classification, a description of underlying principles of operation and their bioanalytical applications. The main focus is placed on the most widely used optical biosensors which are surface plasmon resonance (SPR)-based biosensors including SPR imaging and localized SPR. In addition, other optical biosensor systems are described, such as evanescent wave fluorescence and bioluminescent optical fibre biosensors, as well as interferometric, ellipsometric and reflectometric interference spectroscopy and surface-enhanced Raman scattering biosensors. The optical biosensors discussed here allow the sensitive and selective detection of a wide range of analytes including viruses, toxins, drugs, antibodies, tumour biomarkers and tumour cells. PMID:27365039

  2. Lagrangian optics

    CERN Document Server

    Lakshminarayanan, Vasudevan; Thyagarajan, K

    2002-01-01

    Ingeometrical optics, light propagation is analyzed in terms of light rays which define the path of propagation of light energy in the limitofthe optical wavelength tending to zero. Many features oflight propagation can be analyzed in terms ofrays,ofcourse, subtle effects near foci, caustics or turning points would need an analysis based on the wave natureoflight. Allofgeometric optics can be derived from Fermat's principle which is an extremum principle. The counterpart in classical mechanics is of course Hamilton's principle. There is a very close analogy between mechanics ofparticles and optics oflight rays. Much insight (and useful results) can be obtained by analyzing these analogies. Asnoted by H. Goldstein in his book Classical Mechanics (Addison Wesley, Cambridge, MA, 1956), classical mechanics is only a geometrical optics approximation to a wave theory! In this book we begin with Fermat's principle and obtain the Lagrangian and Hamiltonian pictures of ray propagation through various media. Given the ...

  3. International partnership in lunar missions: Inaugural address

    Indian Academy of Sciences (India)

    Dr A P J Abdul Kalam

    2005-12-01

    I am delighted to participate in the 6th International Conference on Exploration and Utilization of the Moon organized by the Physical Research Laboratory,Ahmedabad.I greet the organizers, eminent planetary exploration and space scientists from India and abroad,academicians,industrialists,engineers,entrepreneurs and distinguished guests.I understand that the International Lunar Conference is a forum to discuss scienti fic results of the ongoing and future space missions related to lunar exploration.This conference will also be utilized to develop understanding on various strategies,initiatives and missions leading to a permanent human presence on our Moon as the future objective.I am happy to note that interactions that took place in the earlier conferences have been bene ficial to participating countries through the intense sharing of scientific knowledge,data and hands-on mission experiences of various space agencies pursuing lunar exploration programmes.I find that nearly 100 scientific papers are being presented in this conference and that the Moon missions being planned and conducted by all the space faring nations of the world are being presented,reviewed and discussed.I note with excitement that many key issues related to space science and Moon missions are being addressed in this conference.These deliberations are important for the world space science community.This will enable you to obtain a comprehensive picture of the goals and policies of all nations striving towards a common vision of space research,being made available for the bene fit of all mankind.Indeed this augurs well for progress towards universal peace and harmony that is a cherished goal of the people of the world as a whole.

  4. Address burnout with a caring, nurturing environment.

    Science.gov (United States)

    2014-06-01

    With their hectic schedules and demanding work responsibilities, emergency physicians are particularly vulnerable to symptoms of burnout. One study showed that more than half of emergency providers reported at least one symptom of burnout when they were asked to fill out a survey tool used to measure burnout--more than any other type of provider. It's a concern because physicians experiencing burnout may be less attentive to their patients, and some ultimately choose to leave medicine because they are no longer satisfied with their work. However, there are steps health systems and administrators can take to help physicians who are struggling, and prevent isolated problems from escalating into larger issues. When a national sample of more than 7,200 physicians agreed to take the Maslach Burnout Inventory, a survey tool used to measure burnout, nearly half (45.8%) reported at least one symptom of burnout, and 65% of the emergency providers reported symptoms of burnout. Burnout is not just fatigue. It involves disappointment in a relationship or relationships, and lack of satisfaction or fulfillment with work, according to experts. Symptoms may include moodiness, irritability, sarcasm, and may result in performance issues as well. Further, there may be physical changes such as weight loss or changes in appetite. To prevent or address burnout, experts advise health systems to nurture a caring, collaborative environment, and to make sure that providers have mentors or resources to reach out to if they are experiencing any work-related problems. They also advise administrators to make sure that burnout is a safe topic of conversation.

  5. Programmatic methods for addressing contaminated volume uncertainties.

    Energy Technology Data Exchange (ETDEWEB)

    DURHAM, L.A.; JOHNSON, R.L.; RIEMAN, C.R.; SPECTOR, H.L.; Environmental Science Division; U.S. ARMY CORPS OF ENGINEERS BUFFALO DISTRICT

    2007-01-01

    Accurate estimates of the volumes of contaminated soils or sediments are critical to effective program planning and to successfully designing and implementing remedial actions. Unfortunately, data available to support the preremedial design are often sparse and insufficient for accurately estimating contaminated soil volumes, resulting in significant uncertainty associated with these volume estimates. The uncertainty in the soil volume estimates significantly contributes to the uncertainty in the overall project cost estimates, especially since excavation and off-site disposal are the primary cost items in soil remedial action projects. The Army Corps of Engineers Buffalo District's experience has been that historical contaminated soil volume estimates developed under the Formerly Utilized Sites Remedial Action Program (FUSRAP) often underestimated the actual volume of subsurface contaminated soils requiring excavation during the course of a remedial activity. In response, the Buffalo District has adopted a variety of programmatic methods for addressing contaminated volume uncertainties. These include developing final status survey protocols prior to remedial design, explicitly estimating the uncertainty associated with volume estimates, investing in predesign data collection to reduce volume uncertainties, and incorporating dynamic work strategies and real-time analytics in predesign characterization and remediation activities. This paper describes some of these experiences in greater detail, drawing from the knowledge gained at Ashland1, Ashland2, Linde, and Rattlesnake Creek. In the case of Rattlesnake Creek, these approaches provided the Buffalo District with an accurate predesign contaminated volume estimate and resulted in one of the first successful FUSRAP fixed-price remediation contracts for the Buffalo District.

  6. Computational strategies to address chromatin structure problems

    Science.gov (United States)

    Perišić, Ognjen; Schlick, Tamar

    2016-06-01

    While the genetic information is contained in double helical DNA, gene expression is a complex multilevel process that involves various functional units, from nucleosomes to fully formed chromatin fibers accompanied by a host of various chromatin binding enzymes. The chromatin fiber is a polymer composed of histone protein complexes upon which DNA wraps, like yarn upon many spools. The nature of chromatin structure has been an open question since the beginning of modern molecular biology. Many experiments have shown that the chromatin fiber is a highly dynamic entity with pronounced structural diversity that includes properties of idealized zig-zag and solenoid models, as well as other motifs. This diversity can produce a high packing ratio and thus inhibit access to a majority of the wound DNA. Despite much research, chromatin’s dynamic structure has not yet been fully described. Long stretches of chromatin fibers exhibit puzzling dynamic behavior that requires interpretation in the light of gene expression patterns in various tissue and organisms. The properties of chromatin fiber can be investigated with experimental techniques, like in vitro biochemistry, in vivo imagining, and high-throughput chromosome capture technology. Those techniques provide useful insights into the fiber’s structure and dynamics, but they are limited in resolution and scope, especially regarding compact fibers and chromosomes in the cellular milieu. Complementary but specialized modeling techniques are needed to handle large floppy polymers such as the chromatin fiber. In this review, we discuss current approaches in the chromatin structure field with an emphasis on modeling, such as molecular dynamics and coarse-grained computational approaches. Combinations of these computational techniques complement experiments and address many relevant biological problems, as we will illustrate with special focus on epigenetic modulation of chromatin structure.

  7. Final Report on Internet Addressable Lightswitch

    Energy Technology Data Exchange (ETDEWEB)

    Rubinstein, Francis; Pettler, Peter

    2001-08-27

    This report describes the work performed to develop and test a new switching system and communications network that is useful for economically switching lighting circuits in existing commercial buildings. The first section of the report provides the general background of the IBECS (Integrated Building Environmental Communications System) research and development work as well as the context for the development of the new switching system. The research and development effort that went into producing the first proof-of-concept (the IBECS Addressable Power Switch or APS) and the physical prototype of that concept is detailed in the second section. In the third section of the report, we detail the refined Powerline Carrier Based IBECS Title 24 Wall Switch system that evolved from the APS prototype. The refined system provided a path for installing IBECS switching technology in existing buildings that may not be already wired for light level switching control. The final section of the report describes the performance of the IBECS Title 24 Switch system as applied to a small demonstration in two offices at LBNL's Building 90. We learned that the new Powerline Carrier control systems (A-10 technology) that have evolved from the early X-10 systems have solved most of the noise problems that dogged the successful application of X-10 technologies in commercial buildings. We found that the new A-10 powerline carrier control technology can be reliable and effective for switching lighting circuits even in electrically noisy office environments like LBNL. Thus we successfully completed the task objectives by designing, building and demonstrating a new switching system that can provide multiple levels of light which can be triggered either from specially designed wall switches or from a digital communications network. By applying commercially available powerline carrier based technologies that communicate over the in-place lighting wiring system, this type of control can be

  8. Public health approach to address maternal mortality.

    Science.gov (United States)

    Rai, Sanjay K; Anand, K; Misra, Puneet; Kant, Shashi; Upadhyay, Ravi Prakash

    2012-01-01

    Reducing maternal mortality is one of the major challenges to health systems worldwide, more so in developing countries that account for nearly 99% of these maternal deaths. Lack of a standard method for reporting of maternal death poses a major hurdle in making global comparisons. Currently much of the focus is on documenting the "number" of maternal deaths and delineating the "medical causes" behind these deaths. There is a need to acknowledge the social correlates of maternal deaths as well. Investigating and in-depth understanding of each maternal death can provide indications on practical ways of addressing the problem. Death of a mother has serious implications for the child as well as other family members and to prevent the same, a comprehensive approach is required. This could include providing essential maternal care, early management of complications and good quality intrapartum care through the involvement of skilled birth attendants. Ensuring the availability, affordability, and accessibility of quality maternal health services, including emergency obstetric care (EmOC) would prove pivotal in reducing the maternal deaths. To increase perceived seriousness of the community regarding maternal health, a well-structured awareness campaign is needed with importance be given to avoid adolescent pregnancy as well. Initiatives like Janani Surakhsha Yojna (JSY) that have the potential to improve maternal health needs to be strengthened. Quality assessments should form an essential part of all services that are directed toward improving maternal health. Further, emphasis needs to be given on research by involving multiple allied partners, with the aim to develop a prioritized, coordinated, and innovative research agenda for women's health.

  9. Public health approach to address maternal mortality

    Directory of Open Access Journals (Sweden)

    Sanjay K Rai

    2012-01-01

    Full Text Available Reducing maternal mortality is one of the major challenges to health systems worldwide, more so in developing countries that account for nearly 99% of these maternal deaths. Lack of a standard method for reporting of maternal death poses a major hurdle in making global comparisons. Currently much of the focus is on documenting the "number" of maternal deaths and delineating the "medical causes" behind these deaths. There is a need to acknowledge the social correlates of maternal deaths as well. Investigating and in-depth understanding of each maternal death can provide indications on practical ways of addressing the problem. Death of a mother has serious implications for the child as well as other family members and to prevent the same, a comprehensive approach is required. This could include providing essential maternal care, early management of complications and good quality intrapartum care through the involvement of skilled birth attendants. Ensuring the availability, affordability, and accessibility of quality maternal health services, including emergency obstetric care (EmOC would prove pivotal in reducing the maternal deaths. To increase perceived seriousness of the community regarding maternal health, a well-structured awareness campaign is needed with importance be given to avoid adolescent pregnancy as well. Initiatives like Janani Surakhsha Yojna (JSY that have the potential to improve maternal health needs to be strengthened. Quality assessments should form an essential part of all services that are directed toward improving maternal health. Further, emphasis needs to be given on research by involving multiple allied partners, with the aim to develop a prioritized, coordinated, and innovative research agenda for women′s health.

  10. 21 CFR 1321.01 - DEA mailing addresses.

    Science.gov (United States)

    2010-04-01

    ... Addresses Code of Federal Regulations Section—Topic DEA Mailing address DEA Administrator 1308.43(b... 21 Food and Drugs 9 2010-04-01 2010-04-01 false DEA mailing addresses. 1321.01 Section 1321.01 Food and Drugs DRUG ENFORCEMENT ADMINISTRATION, DEPARTMENT OF JUSTICE DEA MAILING ADDRESSES § 1321.01...

  11. Optical frequency standards for time and length applications

    Science.gov (United States)

    Hong, Feng-Lei

    2017-01-01

    The last decade has witnessed tremendous progress in research on optical frequency metrology. Optical frequency standards using optical lattice and single-ion trap technologies have reached levels of stability and accuracy that surpass the performance of the best Cs fountain atomic clocks by orders of magnitude. Optical frequency standards are also used for various applications including length metrology. Optical frequency measurement and links using optical frequency combs and optical fibres play important roles in the development of optical frequency standards. This article introduces optical frequency standards recommended by the International Committee for Weights and Measures (CIPM) along with updates provided by recent research results. Frequency ratio measurements and remote frequency comparisons are addressed in relation to the work whose goal is to redefine the second. Optical frequency standard and optical frequency comb applications are also described.

  12. Essentials of nonlinear optics

    CERN Document Server

    Murti, Y V G S

    2014-01-01

    Current literature on Nonlinear Optics varies widely in terms of content, style, and coverage of specific topics, relative emphasis of areas and the depth of treatment. While most of these books are excellent resources for the researchers, there is a strong need for books appropriate for presenting the subject at the undergraduate or postgraduate levels in Universities. The need for such a book to serve as a textbook at the level of the bachelors and masters courses was felt by the authors while teaching courses on nonlinear optics to students of both science and engineering during the past two decades. This book has emerged from an attempt to address the requirement of presenting the subject at college level. A one-semester course covering the essentials can effectively be designed based on this.

  13. Optical developments for optogenetics.

    Science.gov (United States)

    Papagiakoumou, Eirini

    2013-10-01

    Brain intricacies and the difficulty that scientists encounter in revealing its function with standard approaches such as electrical stimulation of neurons have led to the exploration of new tools that enable the study of neural circuits in a remote and non-invasive way. To this end, optogenetics has initialised a revolution for neuroscience in the last decade by enabling simultaneous monitoring and stimulation of specific neuronal populations in intact brain preparations through genetically targeted expression of light sensitive proteins and molecular photoswitches. In addition to ongoing molecular probe development and optimisation, novel optical techniques hold immense potential to amplify and diversify the utility of optogenetic methods. Importantly, by improving the spatio-temporal resolution of light stimulation, neural circuits can be photoactivated in patterns mimicking endogenous physiological processes. The following synopsis addresses the possibilities and limitations of optical stimulation methods applied to and developed for activation of neuronal optogenetic tools.

  14. Addressing contrasting cognitive models in scientific collaboration

    Science.gov (United States)

    Diviacco, P.

    2012-04-01

    If the social aspects of scientific communities and their internal dynamics is starting to be recognized and acknowledged in the everyday lives of scientists, it is rather difficult for them to find tools that could support their activities consistently with this perspective. Issues span from gathering researchers to mutual awareness, from information sharing to building meaning, with the last one being particularly critical in research fields as the geo-sciences, that deal with the reconstruction of unique, often non-reproducible, and contingent processes. Reasoning here is, in fact, mainly abductive, allowing multiple and concurrent explanations for the same phenomenon to coexist. Scientists bias one hypothesis over another not only on strictly logical but also on sociological motivations. Following a vision, scientists tend to evolve and isolate themselves from other scientists creating communities characterized by different cognitive models, so that after some time these become incompatible and scientists stop understanding each other. We address these problems as a communication issue so that the classic distinction into three levels (syntactic, semantic and pragmatic) can be used. At the syntactic level, we highlight non-technical obstacles that condition interoperability and data availability and transparency. At the semantic level, possible incompatibilities of cognitive models are particularly evident, so that using ontologies, cross-domain reconciliation should be applied. This is a very difficult task to perform since the projection of knowledge by scientists, in the designated community, is political and thus can create a lot of tension. The strategy we propose to overcome these issues pertains to pragmatics, in the sense that it is intended to acknowledge the cultural and personal factors each partner brings into the collaboration and is based on the idea that meaning should remain a flexible and contingent representation of possibly divergent views

  15. Evaluating Judicial Performance and Addressing Gender Bias

    Directory of Open Access Journals (Sweden)

    Angela Melville

    2014-12-01

    Full Text Available Elek and Rottman argue that judicial evaluation is often biased against women and minority judges. The need to address bias is important, however often the desire for diversity seems so self-evident as to belie deeper analysis. This paper examines the two main rationales for gender equality on the bench. First, female judges are often considered necessary in order to bring a gendered perspective to judging, however it is argued that this rationale is flawed. Second, an alternative rationale based on equality and legitimacy is offered which avoids gender essentialism. While debates typically focus on these two rationales, a third rationale embraces both difference and equality/legitimacy. The presence of female judges has an important symbolic value which destabilises existing fraternal legal norms. Finally, increasing the number of female judges may not necessarily change judging, and this paper also analyses how the transformative potential offered by judicial diversity can work in practice. Elek y Rottman defienden que la evaluación judicial suele estar sesgada en contra de las mujeres y los jueces pertenecientes a minorías. La necesidad de abordar el sesgo es importante, sin embargo a menudo el deseo de diversidad parece tan evidente como para contradecir un análisis más profundo. Este artículo examina los dos motivos principales para la igualdad de género en el banquillo. En primer lugar, las mujeres jueces a menudo se consideran necesarias para aportar una perspectiva de género al hecho de juzgar, sin embargo, se defiende que este razonamiento es erróneo. En segundo lugar, se ofrece una alternativa lógica basada en la igualdad y la legitimidad que evita el esencialismo de género. Mientras que los debates suelen centrarse en estas dos razones, una tercera justificación abarca tanto la diferencia como la igualdad/legitimidad. La presencia de mujeres en la judicatura tiene un importante valor simbólico que desestabiliza las normas

  16. Multi Sensor Approach to Address Sustainable Development

    Science.gov (United States)

    Habib, Shahid

    2007-01-01

    The main objectives of Earth Science research are many folds: to understand how does this planet operates, can we model her operation and eventually develop the capability to predict such changes. However, the underlying goals of this work are to eventually serve the humanity in providing societal benefits. This requires continuous, and detailed observations from many sources in situ, airborne and space. By and large, the space observations are the way to comprehend the global phenomena across continental boundaries and provide credible boundary conditions for the mesoscale studies. This requires a multiple sensors, look angles and measurements over the same spot in accurately solving many problems that may be related to air quality, multi hazard disasters, public health, hydrology and more. Therefore, there are many ways to address these issues and develop joint implementation, data sharing and operating strategies for the benefit of the world community. This is because for large geographical areas or regions and a diverse population, some sound observations, scientific facts and analytical models must support the decision making. This is crucial for the sustainability of vital resources of the world and at the same time to protect the inhabitants, endangered species and the ecology. Needless to say, there is no single sensor, which can answer all such questions effectively. Due to multi sensor approach, it puts a tremendous burden on any single implementing entity in terms of information, knowledge, budget, technology readiness and computational power. And, more importantly, the health of planet Earth and its ability to sustain life is not governed by a single country, but in reality, is everyone's business on this planet. Therefore, with this notion, it is becoming an impractical problem by any single organization/country to bear this colossal responsibility. So far, each developed country within their means has proceeded along satisfactorily in implementing

  17. Addressing the Old Water Paradox using tritium

    Science.gov (United States)

    Cartwright, Ian; Morgenstern, Uwe

    2017-04-01

    , including intermediate stores such as soil water, interflow, and water in the regolith, a multi-tracer approach is required to apportion the contribution of water from these stores during high flow events. Most of the major ions and EC were not useful in determining the changing water stores and the variation in stable isotopes was minor. Tritium provides the opportunity to directly assess how the average residence time of water varies across the flow event and through this address some aspects of the old water paradox.

  18. Multi Sensor Approach to Address Sustainable Development

    Science.gov (United States)

    Habib, Shahid

    2007-01-01

    The main objectives of Earth Science research are many folds: to understand how does this planet operates, can we model her operation and eventually develop the capability to predict such changes. However, the underlying goals of this work are to eventually serve the humanity in providing societal benefits. This requires continuous, and detailed observations from many sources in situ, airborne and space. By and large, the space observations are the way to comprehend the global phenomena across continental boundaries and provide credible boundary conditions for the mesoscale studies. This requires a multiple sensors, look angles and measurements over the same spot in accurately solving many problems that may be related to air quality, multi hazard disasters, public health, hydrology and more. Therefore, there are many ways to address these issues and develop joint implementation, data sharing and operating strategies for the benefit of the world community. This is because for large geographical areas or regions and a diverse population, some sound observations, scientific facts and analytical models must support the decision making. This is crucial for the sustainability of vital resources of the world and at the same time to protect the inhabitants, endangered species and the ecology. Needless to say, there is no single sensor, which can answer all such questions effectively. Due to multi sensor approach, it puts a tremendous burden on any single implementing entity in terms of information, knowledge, budget, technology readiness and computational power. And, more importantly, the health of planet Earth and its ability to sustain life is not governed by a single country, but in reality, is everyone's business on this planet. Therefore, with this notion, it is becoming an impractical problem by any single organization/country to bear this colossal responsibility. So far, each developed country within their means has proceeded along satisfactorily in implementing

  19. All-Optical Network Subsystems Using Integrated SOA-Based Optical Gates and Flip-Flops for Label-Swapped Netorks

    DEFF Research Database (Denmark)

    Seoane, Jorge; Holm-Nielsen, Pablo Villanueva; Kehayas, E.;

    2006-01-01

    In this letter, we demonstrate that all-optical network subsystems, offering intelligence in the optical layer, can be constructed by functional integration of integrated all-optical logic gates and flip-flops. In this context, we show 10-Gb/s all-optical 2-bit label address recognition by interc...

  20. Nonlinear optics

    CERN Document Server

    Bloembergen, Nicolaas

    1996-01-01

    Nicolaas Bloembergen, recipient of the Nobel Prize for Physics (1981), wrote Nonlinear Optics in 1964, when the field of nonlinear optics was only three years old. The available literature has since grown by at least three orders of magnitude.The vitality of Nonlinear Optics is evident from the still-growing number of scientists and engineers engaged in the study of new nonlinear phenomena and in the development of new nonlinear devices in the field of opto-electronics. This monograph should be helpful in providing a historical introduction and a general background of basic ideas both for expe

  1. Optical holography

    CERN Document Server

    Collier, Robert

    2013-01-01

    Optical Holography deals with the use of optical holography to solve technical problems, with emphasis on the properties of holograms formed with visible light. Topics covered include the Fourier transform, propagation and diffraction, pulsed-laser holography, and optical systems with spherical lenses. A geometric analysis of point-source holograms is also presented, and holograms and hologram spatial filters formed with spatially modulated reference waves are described. This book is comprised of 20 chapters and begins with an introduction to concepts that are basic to understanding hologr

  2. Research on the Mo del of a Lightweight Resource Addressing

    Institute of Scientific and Technical Information of China (English)

    LUO Bingqing; SUN Zhixin

    2015-01-01

    This paper discussed the characteristics of addressing from the perspective of Internet address-ing mechanism. An Internet of things (IOT) resource ad-dressing iteration model was defined. In the model, a di-rect addressing mode for active nodes and an indirect addressing mode for passive codes were proposed, which meet the requirement for multiple encoding mode. A uni-fied IOT resource lightweight addressing scheme based on IPv6 has been proposed to implement the two addressing modes. The scheme utilized the virtual domain to solve the problem of the heterogeneous encoding. The paper imple-mented the addressing process from the Internet host to the sensor node based on IPv6 over low-power wireless personal area networks (6LoWPAN) protocol. The experi-ment results show that the scheme is performed to realize communication between wireless sensor networks and IPv6 networks.

  3. A knowledge-based agent prototype for Chinese address geocoding

    Science.gov (United States)

    Wei, Ran; Zhang, Xuehu; Ding, Linfang; Ma, Haoming; Li, Qi

    2009-10-01

    Chinese address geocoding is a difficult problem to deal with due to intrinsic complexities in Chinese address systems and a lack of standards in address assignments and usages. In order to improve existing address geocoding algorithm, a spatial knowledge-based agent prototype aimed at validating address geocoding results is built to determine the spatial accuracies as well as matching confidence. A portion of human's knowledge of judging the spatial closeness of two addresses is represented via first order logic and the corresponding algorithms are implemented with the Prolog language. Preliminary tests conducted using addresses matching result in Beijing area showed that the prototype can successfully assess the spatial closeness between the matching address and the query address with 97% accuracy.

  4. Optical Spectroscopy

    DEFF Research Database (Denmark)

    Thyrhaug, Erling

    The work presented in this thesis is broadly concerned with how complexation reactions and molecular motion can be characterized with the standard techniques in optical spectroscopy. The thesis aims to show a relatively broad range of methods for probing physico-chemical properties in fluorophore...... containing systems and are characterized using techniques in optical spectroscopy. Of the standard techniques in optical spectroscopy, particular attention has been paid to those based on time-resolved measurements and polarization, which is reflected in the experiment design in the projects. Not all...... reactions by optical spectroscopy. In project 1 simple steady-state absorption and fluorescence spectroscopy is used to determine the stoichiometries and equilibrium constants in the inclusion complex formation between cyclodextrins and derivatives of the water-insoluble oligo(phenylene vinylene) in aqueous...

  5. Miniaturised optical sensors for industrial applications

    DEFF Research Database (Denmark)

    Jakobsen, Michael Linde; Hanson, Steen Grüner

    2010-01-01

    When addressing optical sensors for use in e.g. industry, compactness, robustness and performance are essentials. Adhering to these demands, we have developed a suit of compact optical sensors for the specific purposes of measuring angular velocity and linear translations of rigid objects....... The technology is based on compact and low-cost laser sources such as Vertical Cavity Surface Emitting Lasers (VCSELs). The methods characterise the object motion by speckle translation in the near field (imaging) or far field (optical Fourier transform) by optical spatial filtering velocimetry. The volume...

  6. Quantum optics

    DEFF Research Database (Denmark)

    Andersen, Ulrik Lund

    2013-01-01

    Further sensitivity improvements are required before advanced optical interferometers will be able to measure gravitational waves. A team has now shown that introducing quantum squeezing of light may help to detect these elusive waves.......Further sensitivity improvements are required before advanced optical interferometers will be able to measure gravitational waves. A team has now shown that introducing quantum squeezing of light may help to detect these elusive waves....

  7. Quantum optics

    DEFF Research Database (Denmark)

    Andersen, Ulrik Lund

    2013-01-01

    Further sensitivity improvements are required before advanced optical interferometers will be able to measure gravitational waves. A team has now shown that introducing quantum squeezing of light may help to detect these elusive waves.......Further sensitivity improvements are required before advanced optical interferometers will be able to measure gravitational waves. A team has now shown that introducing quantum squeezing of light may help to detect these elusive waves....

  8. Ocean optics

    Energy Technology Data Exchange (ETDEWEB)

    Spinard, R.W.; Carder, K.L.; Perry, M.J.

    1994-12-31

    This volume is the twenty fifth in the series of Oxford Monographs in Geology and Geophysics. The propagation off light in the hydra-atmosphere systems is governed by the integral-differential Radiative Transfer Equation (RTE). Closure and inversion are the most common techniques in optical oceanography to understand the most basic principles of natural variability. Three types of closure are dealt with: scale closure, experimental closure, and instrument closure. The subject is well introduced by Spinard et al. in the Preface while Howard Gordon in Chapter 1 provides an in-depth introduction to the RTE and its inherent problems. Inherent and apparent optical properties are dealt with in Chapter 2 by John Kirk and the realities of optical closure are presented in the following chapter by Ronald Zaneveld. The balance of the papers in this volume is quite varied. The early papers deal in a very mathematical manner with the basics of radiative transfer and the relationship between inherent and optical properties. Polarization of sea water is discussed in a chapter that contains a chronological listing of discoveries in polarization, starting at about 1000 AD with the discovery of dichroic properties of crystals by the Vikings and ending with the demonstration of polarotaxis in certain marine organisms by Waterman in 1972. Chapter 12 on Raman scattering in pure water and the pattern recognition techniques presented in Chapter 13 on the optical effects of large particles may be of relevance to fields outside ocean optics.

  9. Optic nerve atrophy

    Science.gov (United States)

    Optic atrophy; Optic neuropathy ... There are many causes of optic atrophy. The most common is poor blood flow. This is called ischemic optic neuropathy. The problem most often affects older adults. The optic ...

  10. Optical Addressing of Multi-Colour Photochromic Material Mixture for Volumetric Display

    Science.gov (United States)

    Hirayama, Ryuji; Shiraki, Atsushi; Naruse, Makoto; Nakamura, Shinichiro; Nakayama, Hirotaka; Kakue, Takashi; Shimobaba, Tomoyoshi; Ito, Tomoyoshi

    2016-08-01

    This is the first study to demonstrate that colour transformations in the volume of a photochromic material (PM) are induced at the intersections of two control light channels, one controlling PM colouration and the other controlling decolouration. Thus, PM colouration is induced by position selectivity, and therefore, a dynamic volumetric display may be realised using these two control lights. Moreover, a mixture of multiple PM types with different absorption properties exhibits different colours depending on the control light spectrum. Particularly, the spectrum management of the control light allows colour-selective colouration besides position selectivity. Therefore, a PM-based, full-colour volumetric display is realised. We experimentally construct a mixture of two PM types and validate the operating principles of such a volumetric display system. Our system is constructed simply by mixing multiple PM types; therefore, the display hardware structure is extremely simple, and the minimum size of a volume element can be as small as the size of a molecule. Volumetric displays can provide natural three-dimensional (3D) perception; therefore, the potential uses of our system include high-definition 3D visualisation for medical applications, architectural design, human–computer interactions, advertising, and entertainment.

  11. Optical Addressing Electronic Tongue Based on Low Selective Photovoltaic Transducer with Nanoporous Silicon Layer

    Science.gov (United States)

    Litvinenko, S. V.; Bielobrov, D. O.; Lysenko, V.; Skryshevsky, V. A.

    2016-08-01

    The electronic tongue based on the array of low selective photovoltaic (PV) sensors and principal component analysis is proposed for detection of various alcohol solutions. A sensor array is created at the forming of p-n junction on silicon wafer with porous silicon layer on the opposite side. A dynamical set of sensors is formed due to the inhomogeneous distribution of the surface recombination rate at this porous silicon side. The sensitive to molecular adsorption photocurrent is induced at the scanning of this side by laser beam. Water, ethanol, iso-propanol, and their mixtures were selected for testing. It is shown that the use of the random dispersion of surface recombination rates on different spots of the rear side of p-n junction and principal component analysis of PV signals allows identifying mentioned liquid substances and their mixtures.

  12. Plasmonic Purcell factor and coupling efficiency to surface plasmons. Implications for addressing and controlling optical nanosources

    Science.gov (United States)

    Colas des Francs, G.; Barthes, J.; Bouhelier, A.; Weeber, J. C.; Dereux, A.; Cuche, A.; Girard, C.

    2016-09-01

    The Purcell factor F p is a key quantity in cavity quantum electrodynamics (cQED) that quantifies the coupling rate between a dipolar emitter and a cavity mode. Its simple form {F}{{p}}\\propto Q/V unravels the possible strategies to enhance and control light-matter interaction. Practically, efficient light-matter interaction is achieved thanks to either (i) high quality factor Q at the basis of cQED or (ii) low modal volume V at the basis of nanophotonics and plasmonics. In the last decade, strong efforts have been done to derive a plasmonic Purcell factor in order to transpose cQED concepts to the nanocale, in a scale-law approach. In this work, we discuss the plasmonic Purcell factor for both delocalized (SPP) and localized (LSP) surface-plasmon-polaritons and briefly summarize the expected applications for nanophotonics. On the basis of the SPP resonance shape (Lorentzian or Fano profile), we derive closed form expression for the coupling rate to delocalized plasmons. The quality factor factor and modal confinement of both SPP and LSP are quantified, demonstrating their strongly subwavelength behavior.

  13. Cavity-Free, Matrix-Addressable Quantum Dot Architecture for On-Chip Optical Switching

    Science.gov (United States)

    2013-04-01

    or photo-induced bleaching. Given their intrinsically low IEP (~3, close to that of SiO2) they are ideal candidates for our electrostatic self...are currently investigating usage of our method on substrates with high IEPs such as Al2O3, Si3N4, and ITO. By using nanoparticle emitters with...intrinsically high IEPs , such as MgO nanocubes and ZnO nanocrystals, we can expand the range of applicability of our self-assembly technique. Personnel

  14. Asynchronous transfer of individually addressable optical channels through a multimode fiber using phase conjugation

    CERN Document Server

    Czarske, Jueurgen W; Koukourakis, Nektarios; Buettner, Lars

    2016-01-01

    Multimode fibers are attractive for a variety of applications such as internet data transfer, data center hubs, micromanipulation, optogenetics and other biomedical applications. A major hurdle for imaging through multimode fibers is the occurring scrambling, resulting in a randomization of light. Recently, clear imaging has been successfully accomplished using wavefront shaping, but the spatial information was transferred synchronously only. We demonstrate asynchronous information transmission using individual phase conjugations by employing only one spatial light modulator with multiple windows. Our findings pave the way towards individual signal transfer inside strongly scattering media.

  15. Optical Addressing Electronic Tongue Based on Low Selective Photovoltaic Transducer with Nanoporous Silicon Layer.

    Science.gov (United States)

    Litvinenko, S V; Bielobrov, D O; Lysenko, V; Skryshevsky, V A

    2016-12-01

    The electronic tongue based on the array of low selective photovoltaic (PV) sensors and principal component analysis is proposed for detection of various alcohol solutions. A sensor array is created at the forming of p-n junction on silicon wafer with porous silicon layer on the opposite side. A dynamical set of sensors is formed due to the inhomogeneous distribution of the surface recombination rate at this porous silicon side. The sensitive to molecular adsorption photocurrent is induced at the scanning of this side by laser beam. Water, ethanol, iso-propanol, and their mixtures were selected for testing. It is shown that the use of the random dispersion of surface recombination rates on different spots of the rear side of p-n junction and principal component analysis of PV signals allows identifying mentioned liquid substances and their mixtures.

  16. Address forms in Persian based on Iranian movies

    OpenAIRE

    Derakhshan Rokni, Tina

    2012-01-01

    The present thesis: “Address forms in Persian language based on Iranian movies”, investigates address forms as socio-linguistic forms which are directly related to social factors such as age, gender and social class. In the Persian language there is a strong tradition of addressing each other in various ways, changing from one context to another. Addressing is a universal phenomenon, but the rules that govern the choice are different from one language to another. So, the hierarchical struc...

  17. 40 Gbit/s Transparent Network Based on Wavelength-Selective Optical Cross Connect

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    This paper discusses a 40-Gbit/s transparent optical network focusing on the optical transport performance. We show 1200-km transmission with two WSOXC' sspaced by 400 km. In addition, network control issues are briefly addressed.

  18. Evaluations of fiber optic sensors for interior applications

    Energy Technology Data Exchange (ETDEWEB)

    Sandoval, M.W.; Malone, T.P.

    1996-02-01

    This report addresses the testing and evaluation of commercial fiber optic intrusion detection systems in interior applications. The applications include laying optical fiber cable above suspended ceilings to detect removal of ceiling tiles, embedding optical fibers inside a tamper or item monitoring blanket that could be placed over an asset, and installing optical fibers on a door to detect movement or penetration. Detection capability of the fiber optic sensors as well as nuisance and false alarm information were focused on during the evaluation. Fiber optic sensor processing, system components, and system setup are described.

  19. Analyzing the Messages of the State of the Union Address

    Science.gov (United States)

    Kissling, Mark T.; Martell, Christopher C.

    2014-01-01

    In the era of smartphones and 24-hour news networks, the State of the Union address is a major event. All national media outlets--in print, on television, on the Internet--report on the address, some almost exclusively in the days leading up to and after the speech. In this article, considering their experiences teaching about the address, and…

  20. 76 FR 22681 - Defense Logistics Agency (DLA) Address Directory

    Science.gov (United States)

    2011-04-22

    ... of the Secretary Defense Logistics Agency (DLA) Address Directory AGENCY: Department of Defense. ACTION: Notice. SUMMARY: The Defense Logistics Agency (DLA) is updating its Address Directory which is.... Jody Sinkler, 703-767-5045. SUPPLEMENTARY INFORMATION: DLA Address Directory: Defense Logistics...

  1. 12 CFR 5.52 - Change of address.

    Science.gov (United States)

    2010-01-01

    ... CORPORATE ACTIVITIES Other Changes in Activities and Operations § 5.52 Change of address. (a) Authority. 12... 12 Banks and Banking 1 2010-01-01 2010-01-01 false Change of address. 5.52 Section 5.52 Banks and... notify the OCC of any change in its address. However, no notice is required if the change in...

  2. An Efficient Geographical Addressing Scheme for the Internet

    NARCIS (Netherlands)

    Meijerink, Bernd; Baratchi, Mitra; Heijenk, Geert

    2016-01-01

    Geocast is a scheme which allows packets to be sent to a destination area instead of an address. This allows the addressing of any device in a specific region without further knowledge. In this paper we present an addressing mechanism that allows efficient referral to areas of arbitrary size. The bi

  3. Individually addressable cathodes with integrated focusing stack or detectors

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, Clarence E.; Baylor, Larry R.; Voelkl, Edgar; Simpson, Michael L.; Paulus, Michael J.; Lowndes, Douglas; Whealton, John; Whitson, John C.; Wilgen, John B.

    2005-07-12

    Systems and method are described for addressable field emission array (AFEA) chips. A plurality of individually addressable cathodes are integrated with an electrostatic focusing stack and/or a plurality of detectors on the addressable field emission array. The systems and methods provide advantages including the avoidance of space-charge blow-up.

  4. Optics for Athena

    Science.gov (United States)

    Pareschi, Giovanni

    The ATHENA mision will be based on a single X-ray telescope, with a focal length of 12m and an unprecedented effective area (2 m(2) at 1 keV), achieved by means of a single large diameter optics system that will host a very high number (up to 800) of mirror modules, each formed by 40 two-reflection segmented mirror shells.The inner and outer radiaii will be 250 mm and1500 mmrespectively.The requirement of the angular resolution is 5 arc seconds HEW, kept at the same level across a very wide field of view of 40-50 arcmin diameters. The X-ray telescope employs Silicon Pore Optics (SPO), an innovative technology that has been pioneered in Europe over the last decade mostly with ESA support. SPO is a highly modular concept, based on a set of compact individual mirror modules, which has an excellent effective area-to-mass ratio and can achieve high angular resolution. An alternative technology also ebvisage forsees the use of thin slumped glass mirrors. In this paper we will review the design, technology and develoment plan to address the ATHENA optics implementation.

  5. Astronomy and Atmospheric Optics

    Science.gov (United States)

    Cowley, Les; Gaina, Alex

    2011-12-01

    The authors discusse the insuccess of the observation of the Total Eclipse of the Moon from 10 december 2011 in Romania and relate them with meteoconditions. Only a very short part of the last penumbral phase was observed, while the inital part and the totality was not observed due to very dense clouds. The change in color and brightness during this phase was signaled. Meanwhile, there is an area of science where clouds are of great use and interest. This area is Atmospheric optics, while the science which study clouds is meteorology. Clouds in combination with Solar and Moon light could give rise to a variety of strange, rare and unobvious phenomena in the atmosphere (sky), sometimes confused with Unidentified Flying Objects (UFO). The importance of meteorology for astronomy and atmospheric optics is underlined and an invitation to astronomers to use unfavourable days for athmospheric observations was sent. The web address of the site by Les Cowley, designed for atmospheric optics phenomena is contained in the text of the entry.

  6. Optical memory

    Science.gov (United States)

    Mao, Samuel S; Zhang, Yanfeng

    2013-07-02

    Optical memory comprising: a semiconductor wire, a first electrode, a second electrode, a light source, a means for producing a first voltage at the first electrode, a means for producing a second voltage at the second electrode, and a means for determining the presence of an electrical voltage across the first electrode and the second electrode exceeding a predefined voltage. The first voltage, preferably less than 0 volts, different from said second voltage. The semiconductor wire is optically transparent and has a bandgap less than the energy produced by the light source. The light source is optically connected to the semiconductor wire. The first electrode and the second electrode are electrically insulated from each other and said semiconductor wire.

  7. Semiconductor Optics

    CERN Document Server

    Klingshirn, Claus F

    2012-01-01

    This updated and enlarged new edition of Semiconductor Optics provides an introduction to and an overview of semiconductor optics from the IR through the visible to the UV, including linear and nonlinear optical properties, dynamics, magneto and electrooptics, high-excitation effects and laser processes, some applications, experimental techniques and group theory. The mathematics is kept as elementary as possible, sufficient for an intuitive understanding of the experimental results and techniques treated. The subjects covered extend from physics to materials science and optoelectronics. Significantly updated chapters add coverage of current topics such as electron hole plasma, Bose condensation of excitons and meta materials. Over 120 problems, chapter introductions and a detailed index make it the key textbook for graduate students in physics. The mathematics is kept as elementary as possible, sufficient for an intuitive understanding of the experimental results and techniques treated. The subjects covered ...

  8. CODEX optics

    Science.gov (United States)

    Delabre, Bernard; Manescau, Antonio

    2010-07-01

    CODEX is a high resolution spectrograph for the ESO E-ELT. A classical spectrograph can only achieve a resolution of about 120.000 on a 42 m telescope with extremely large echelle gratings and cameras. This paper describes in detail the optical concept of CODEX, which uses only optical elements size similar to those in current high resolution spectrographs. This design is based on slicers, anamorphic beams and slanted VPHG as cross dispersers. In this new version of the CODEX design, no special expensive materials as calcium fluoride or abnormal dispersion glasses are needed. The optical quality is excellent and compatible with 10K x 10K detectors with 10 μm pixels.

  9. Address Points, Address Points centered on structure, Published in 2013, 1:2400 (1in=200ft) scale, Portage County.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Address Points dataset, published at 1:2400 (1in=200ft) scale, was produced all or in part from Orthoimagery information as of 2013. It is described as 'Address...

  10. Address Points, address point locations, centered on the building (if possible), Published in Not Provided, City of Aurora.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Address Points dataset, was produced all or in part from Field Observation information as of Not Provided. It is described as 'address point locations, centered...

  11. Address Points, address points, Published in 2009, 1:24000 (1in=2000ft) scale, Washington County.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Address Points dataset, published at 1:24000 (1in=2000ft) scale, was produced all or in part from Other information as of 2009. It is described as 'address...

  12. Address Points, Address grid, Published in 2008, 1:24000 (1in=2000ft) scale, Uintah County.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Address Points dataset, published at 1:24000 (1in=2000ft) scale, was produced all or in part from Other information as of 2008. It is described as 'Address...

  13. Improved Selectivity From a Wavelength Addressable Device for Wireless Stimulation of Neural Tissue

    Directory of Open Access Journals (Sweden)

    Elif Ç. Seymour

    2014-02-01

    Full Text Available Electrical neural stimulation with micro electrodes is a promising technique for restoring lost functions in the central nervous system as a result of injury or disease. One of the problems related to current neural stimulators is the tissue response due to the connecting wires and the presence of a rigid electrode inside soft neural tissue. We have developed a novel, optically activated, microscale photovoltaic neurostimulator based on a custom layered compound semiconductor heterostructure that is both wireless and has a comparatively small volume. Optical activation provides a wireless means of energy transfer to the neurostimulator, eliminating wires and the associated complications. This neurostimulator was shown to evoke action potentials and a functional motor response in the rat spinal cord. In this work, we extend our design to include wavelength selectivity and thus allowing independent activation of devices. As a proof of concept, we fabricated two different microscale devices with different spectral responsivities in the near-infrared region. We assessed the improved addressability of individual devices via wavelength selectivity as compared to spatial selectivity alone through on-bench optical measurements of the devices in combination with an in vivo light intensity profile in the rat cortex obtained in a previous study. We show that wavelength selectivity improves the individual addressability of the floating stimulators, thus increasing the number of devices that can be implanted in close proximity to each other.

  14. Optomechatronics for Biomedical Optical Imaging: An Overview

    Directory of Open Access Journals (Sweden)

    Cho Hyungsuck

    2015-01-01

    Full Text Available The use of optomechatronic technology, particularly in biomedical optical imaging, is becoming pronounced and ever increasing due to its synergistic effect of the integration of optics and mechatronics. The background of this trend is that the biomedical optical imaging for example in-vivo imaging related to retraction of tissues, diagnosis, and surgical operations have a variety of challenges due to complexity in internal structure and properties of biological body and the resulting optical phenomena. This paper addresses the technical issues related to tissue imaging, visualization of interior surfaces of organs, laparoscopic and endoscopic imaging and imaging of neuronal activities and structures. Within such problem domains the paper overviews the states of the art technology focused on how optical components are fused together with those of mechatronics to create the functionalities required for the imaging systems. Future perspective of the optical imaging in biomedical field is presented in short.

  15. Integrated Optical Interconnect Architectures for Embedded Systems

    CERN Document Server

    Nicolescu, Gabriela

    2013-01-01

    This book provides a broad overview of current research in optical interconnect technologies and architectures. Introductory chapters on high-performance computing and the associated issues in conventional interconnect architectures, and on the fundamental building blocks for integrated optical interconnect, provide the foundations for the bulk of the book which brings together leading experts in the field of optical interconnect architectures for data communication. Particular emphasis is given to the ways in which the photonic components are assembled into architectures to address the needs of data-intensive on-chip communication, and to the performance evaluation of such architectures for specific applications.   Provides state-of-the-art research on the use of optical interconnects in Embedded Systems; Begins with coverage of the basics for high-performance computing and optical interconnect; Includes a variety of on-chip optical communication topologies; Features coverage of system integration and opti...

  16. Statistical optics

    CERN Document Server

    Goodman, Joseph W

    2015-01-01

    This book discusses statistical methods that are useful for treating problems in modern optics, and the application of these methods to solving a variety of such problems This book covers a variety of statistical problems in optics, including both theory and applications.  The text covers the necessary background in statistics, statistical properties of light waves of various types, the theory of partial coherence and its applications, imaging with partially coherent light, atmospheric degradations of images, and noise limitations in the detection of light. New topics have been introduced i

  17. Reflective optics

    CERN Document Server

    Korsch, Dietrich

    1991-01-01

    This is the first book dedicated exclusively to all-reflective imaging systems. It is a teaching tool as well as a practical design tool for anyone who specializes in optics, particularly for those interested in telescopes, infrared, and grazing-incidence systems. The first part of the book describes a unified geometric optical theory of all-reflective imaging systems (from near-normal to grazing incidence) developed from basic principles. The second part discusses correction methods and a multitude of closed-form solutions of well-corrected systems, supplemented with many conventional and unc

  18. Power-optimal encoding for low-power address bus

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    This paper presented a novel bus encoding method to reduce the switching activity on address buses and hence reduce power dissipation. Dynamic-sorting encoding (DSE) method reduces the power dissipation of address bus based on the dynamic reordering of the modified offset address bus lines. This method reorders the ten least significant bits of offset address according to the range of offset address, and the optimal sorting pattern is transmitted through the high bits of address bus without the need for redundant bus lines. The experimental results using an instruction set simulator and SPEC2000 benchmarks show that DSE method can reduce signal transitions on the address bus by 88.2%, and the actual overhead of the encoder circuit is estimated after encoder is designed and synthesized in 0.18-μm CMOS technology. The results show that DSE method outperforms the low-power encoding schemes presented in the past.

  19. Efficient single sideband microwave to optical conversion using an electro-optical whispering gallery mode resonator

    CERN Document Server

    Rueda, Alfredo; Collodo, Michele C; Vogl, Ulrich; Stiller, Birgit; Schunk, Gerhard; Strekalov, Dmitry V; Marquardt, Christoph; Fink, Johannes M; Painter, Oskar; Leuchs, Gerd; Schwefel, Harald G L

    2016-01-01

    Linking classical microwave electrical circuits to the optical telecommunication band is at the core of modern communication. Future quantum information networks will require coherent microwave-to-optical conversion to link electronic quantum processors and memories via low-loss optical telecommunication networks. Efficient conversion can be achieved with electro-optical modulators operating at the single microwave photon level. In the standard electro-optic modulation scheme this is impossible because both, up- and downconverted, sidebands are necessarily present. Here we demonstrate true single sideband up- or downconversion in a triply resonant whispering gallery mode resonator by explicitly addressing modes with asymmetric free spectral range. Compared to previous experiments, we show a three orders of magnitude improvement of the electro-optical conversion efficiency reaching 0.1% photon number conversion for a 10GHz microwave tone at 0.42mW of optical pump power. The presented scheme is fully compatible...

  20. Spin-dependent optical superlattice

    Science.gov (United States)

    Yang, Bing; Dai, Han-Ning; Sun, Hui; Reingruber, Andreas; Yuan, Zhen-Sheng; Pan, Jian-Wei

    2017-07-01

    We propose and implement a lattice scheme for coherently manipulating atomic spins. Using a vector light shift and a superlattice structure, we demonstrate experimentally its capability on addressing spins in double wells and square plaquettes with subwavelength resolution. The quantum coherence of spin manipulations is verified through measuring atom tunneling and spin exchange dynamics. Our experiment presents a building block for engineering many-body quantum states in optical lattices for realizing quantum simulation and computation tasks.

  1. Parameters estimation in quantum optics

    CERN Document Server

    D'Ariano, G M; Sacchi, M F; Paris, Matteo G. A.; Sacchi, Massimiliano F.

    2000-01-01

    We address several estimation problems in quantum optics by means of the maximum-likelihood principle. We consider Gaussian state estimation and the determination of the coupling parameters of quadratic Hamiltonians. Moreover, we analyze different schemes of phase-shift estimation. Finally, the absolute estimation of the quantum efficiency of both linear and avalanche photodetectors is studied. In all the considered applications, the Gaussian bound on statistical errors is attained with a few thousand data.

  2. Optical Network Testbeds Workshop

    Energy Technology Data Exchange (ETDEWEB)

    Joe Mambretti

    2007-06-01

    This is the summary report of the third annual Optical Networking Testbed Workshop (ONT3), which brought together leading members of the international advanced research community to address major challenges in creating next generation communication services and technologies. Networking research and development (R&D) communities throughout the world continue to discover new methods and technologies that are enabling breakthroughs in advanced communications. These discoveries are keystones for building the foundation of the future economy, which requires the sophisticated management of extremely large qualities of digital information through high performance communications. This innovation is made possible by basic research and experiments within laboratories and on specialized testbeds. Initial network research and development initiatives are driven by diverse motives, including attempts to solve existing complex problems, the desire to create powerful new technologies that do not exist using traditional methods, and the need to create tools to address specific challenges, including those mandated by large scale science or government agency mission agendas. Many new discoveries related to communications technologies transition to wide-spread deployment through standards organizations and commercialization. These transition paths allow for new communications capabilities that drive many sectors of the digital economy. In the last few years, networking R&D has increasingly focused on advancing multiple new capabilities enabled by next generation optical networking. Both US Federal networking R&D and other national R&D initiatives, such as those organized by the National Institute of Information and Communications Technology (NICT) of Japan are creating optical networking technologies that allow for new, powerful communication services. Among the most promising services are those based on new types of multi-service or hybrid networks, which use new optical networking

  3. Optical profilometer

    Science.gov (United States)

    Wieloszyńska, Aleksandra; StrÄ kowski, Marcin

    2016-09-01

    The profilometry plays a huge role in the most fields of science and technology. It allows to measure the profile of the surface with high-resolution. This technique is used in the fields like optic, electronic, medicine, automotive, and much more. The aim of the current work was to design and build optical profilometer based on the interference phenomena. The developed device has been working with He-Ne laser (632.8 nm). The optical parts have been chosen in order to reach the sized 2.0 mm x 1.6 mm of scanning area. The setup of the profilometer is based on Twyman-Green interferometer. Therefore, the phase distribution of the backreflected light from measured surface is recorded. The measurements are carried out with the aid of multiframe algorithms. In this approach we have used the Hariharan algorithm to obtain the exact value of the recorded phase. During tests, which have been carried out in order to check the functionality of the device, the interference patterns have been recoded and processed in order to obtain the 3D profile of measured surface. In this contribution the setup of the optical system, as well as signal processing methods are going to be presented. The brief discussion about the advantages and disadvantages, and usefulness of this approach will be carried out.

  4. Diophantine Optics

    Science.gov (United States)

    Rouan, D.

    2016-09-01

    What I call Diophantine optics is the exploitation in optics of some remarkable algebraic relations between powers of integers. The name comes from Diophantus of Alexandria, a greek mathematician, known as the father of algebra. He studied polynomial equations with integer coefficients and integer solutions, called diophantine equations. Since constructive or destructive interferences are playing with optical path differences which are multiple integer (odd or even) of λ/2 and that the complex amplitude is a highly non-linear function of the optical path difference (or equivalently of the phase), one can understand that any Taylor development of this amplitude implies powers of integers. This is the link with Diophantine equations. We show how, especially in the field of interferometry, remarkable relations between powers of integers can help to solve several problems, such as achromatization of a phase shifter or deep nulling efficiency. It appears that all the research that was conducted in this frame of thinking, relates to the field of detection of exoplanets, a very active domain of astrophysics today.

  5. Optical Processing.

    Science.gov (United States)

    1985-12-31

    34perceptron" (F. Rosenblatt, Principles of Neurodynamics ), workers in the neural network field have been seeking to understand how neural networks can perform...Moscow). 13. F. Rosenblatt, Principles of Neurodynamics , (Spartan, 1962). 14. W. Stoner "Incoherent optical processing via spatially offset pupil

  6. Optical correlation

    NARCIS (Netherlands)

    Boden, J.A.

    1974-01-01

    A survey is given of the most common types of coherent optical correlators, which are classified as spatial plane correlators, frequency plane correlators and special reference correlators. Only the spatial plane correlators are dealt with rather thoroughly. Basic principles, some special features,

  7. Optical metrology

    CERN Document Server

    Gåsvik, Kjell J

    2003-01-01

    New material on computerized optical processes, computerized ray tracing, and the fast Fourier transform, Bibre-Bragg sensors, and temporal phase unwrapping.* New introductory sections to all chapters.* Detailed discussion on lasers and laser principles, including an introduction to radiometry and photometry.* Thorough coverage of the CCD camera.

  8. Pulsed Optics

    Science.gov (United States)

    Hirlimann, C.

    Optics is the field of physics which comprises knowledge on the interaction between light and matter. When the superposition principle can be applied to electromagnetic waves or when the properties of matter do not depend on the intensity of light, one speaks of linear optics. This situation occurs with regular light sources such as light bulbs, low-intensity light-emitting diodes and the sun. With such low-intensity sources the reaction of matter to light can be characterized by a set of parameters such as the index of refraction, the absorption and reflection coefficients and the orientation of the medium with respect to the polarization of the light. These parameters depend only on the nature of the medium. The situation changed dramatically after the development of lasers in the early sixties, which allowed the generation of light intensities larger than a kilowatt per square centimeter. Actual large-scale short-pulse lasers can generate peak powers in the petawatt regime. In that large-intensity regime the optical parameters of a material become functions of the intensity of the impinging light. In 1818 Fresnel wrote a letter to the French Academy of Sciences in which he noted that the proportionality between the vibration of the light and the subsequent vibration of matter was only true because no high intensities were available. The intensity dependence of the material response is what usually defines nonlinear optics.

  9. Roadmap on ultrafast optics

    Science.gov (United States)

    Reid, Derryck T.; Heyl, Christoph M.; Thomson, Robert R.; Trebino, Rick; Steinmeyer, Günter; Fielding, Helen H.; Holzwarth, Ronald; Zhang, Zhigang; Del'Haye, Pascal; Südmeyer, Thomas; Mourou, Gérard; Tajima, Toshiki; Faccio, Daniele; Harren, Frans J. M.; Cerullo, Giulio

    2016-09-01

    The year 2015 marked the 25th anniversary of modern ultrafast optics, since the demonstration of the first Kerr lens modelocked Ti:sapphire laser in 1990 (Spence et al 1990 Conf. on Lasers and Electro-Optics, CLEO, pp 619-20) heralded an explosion of scientific and engineering innovation. The impact of this disruptive technology extended well beyond the previous discipline boundaries of lasers, reaching into biology labs, manufacturing facilities, and even consumer healthcare and electronics. In recognition of such a milestone, this roadmap on Ultrafast Optics draws together articles from some of the key opinion leaders in the field to provide a freeze-frame of the state-of-the-art, while also attempting to forecast the technical and scientific paradigms which will define the field over the next 25 years. While no roadmap can be fully comprehensive, the thirteen articles here reflect the most exciting technical opportunities presented at the current time in Ultrafast Optics. Several articles examine the future landscape for ultrafast light sources, from practical solid-state/fiber lasers and Raman microresonators to exotic attosecond extreme ultraviolet and possibly even zeptosecond x-ray pulses. Others address the control and measurement challenges, requiring radical approaches to harness nonlinear effects such as filamentation and parametric generation, coupled with the question of how to most accurately characterise the field of ultrafast pulses simultaneously in space and time. Applications of ultrafast sources in materials processing, spectroscopy and time-resolved chemistry are also discussed, highlighting the improvements in performance possible by using lasers of higher peak power and repetition rate, or by exploiting the phase stability of emerging new frequency comb sources.

  10. Optical Coherence and Quantum Optics

    CERN Document Server

    Mandel, Leonard

    1995-01-01

    This book presents a systematic account of optical coherence theory within the framework of classical optics, as applied to such topics as radiation from sources of different states of coherence, foundations of radiometry, effects of source coherence on the spectra of radiated fields, coherence theory of laser modes, and scattering of partially coherent light by random media. The book starts with a full mathematical introduction to the subject area and each chapter concludes with a set of exercises. The authors are renowned scientists and have made substantial contributions to many of the topi

  11. Diffractive Optical Elements for Dynamic Optical Coupling

    Institute of Scientific and Technical Information of China (English)

    Changhe Zhou; Xin Zhao; Liren Liu

    2003-01-01

    Diffractive optical elements such as the complementary Dammann gratings are incorporated for dynamic optical fiber splitting and combining. Experimental results of 1′8 dynamic optical couplings are presented.

  12. Diffractive Optical Elements for Dynamic Optical Coupling

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    Diffractive optical elements such as the complementary Dammann gratings are incorporated for dynamic optical fiber splitting and combining. Experimental results of 1×8 dynamic optical couplings are presented.

  13. Geometrical charged-particle optics

    CERN Document Server

    Rose, Harald H

    2009-01-01

    This reference monograph covers all theoretical aspects of modern geometrical charged-particle optics. It is intended as a guide for researchers, who are involved in the design of electron optical instruments and beam-guiding systems for charged particles, and as a tutorial for graduate students seeking a comprehensive treatment. Procedures for calculating the properties of systems with arbitrarily curved axes are outlined in detail and methods are discussed for designing and optimizing special components such as aberration correctors, spectrometers, energy filters, monochromators, ion traps, electron mirrors and cathode lenses. Also addressed is the design of novel electron optical components enabling sub-Angstroem spatial resolution and sub-0.1eV energy resolution. Relativistic motion and spin precession of the electron is treated in a concise way by employing a covariant five-dimensional procedure.

  14. Multipulse addressing of a Raman quantum memory: configurable beam splitting and efficient readout.

    Science.gov (United States)

    Reim, K F; Nunn, J; Jin, X-M; Michelberger, P S; Champion, T F M; England, D G; Lee, K C; Kolthammer, W S; Langford, N K; Walmsley, I A

    2012-06-29

    Quantum memories are vital to the scalability of photonic quantum information processing (PQIP), since the storage of photons enables repeat-until-success strategies. On the other hand, the key element of all PQIP architectures is the beam splitter, which allows us to coherently couple optical modes. Here, we show how to combine these crucial functionalities by addressing a Raman quantum memory with multiple control pulses. The result is a coherent optical storage device with an extremely large time bandwidth product, that functions as an array of dynamically configurable beam splitters, and that can be read out with arbitrarily high efficiency. Networks of such devices would allow fully scalable PQIP, with applications in quantum computation, long distance quantum communications and quantum metrology.

  15. Control Plane Strategies for Elastic Optical Networks

    DEFF Research Database (Denmark)

    Turus, Ioan

    The goal of this Ph.d. project is to present and address selected challenges related to the increasing traffic demand and limited available capacity in core optical fiber infrastructure in parallel with tighter requirements of reducing energy consumption and operational costs. Elastic Optical...... consumption. EONs offer the opportunity of deploying energy efficiency strategies, which benefit from the flexible nature of elastic optoelectronic devices. This thesis proposes and investigates different approaches for reducing power consumption based on EONs in realistic dynamic traffic scenarios....

  16. Applied optics and optical engineering v.9

    CERN Document Server

    Shannon, Robert

    1983-01-01

    Applied Optics and Optical Engineering, Volume IX covers the theories and applications of optics and optical engineering. The book discusses the basic algorithms for optical engineering; diffraction gratings, ruled and holographic; and recording and reading of information on optical disks. The text also describes the perfect point spread function; the multiple aperture telescope diffraction images; and the displays and simulators. Ophthalmic optics, as well as the canonical and real-space coordinates used in the theory of image formation are also encompassed. Optical engineers and students tak

  17. Soft optics in intelligent optical networks

    Science.gov (United States)

    Shue, Chikong; Cao, Yang

    2001-10-01

    In addition to the recent advances in Hard-optics that pushes the optical transmission speed, distance, wave density and optical switching capacity, Soft-optics provides the necessary intelligence and control software that reduces operational costs, increase efficiency, and enhances revenue generating services by automating optimal optical circuit placement and restoration, and enabling value-added new services like Optical VPN. This paper describes the advances in 1) Overall Hard-optics and Soft-optics 2) Layered hierarchy of Soft-optics 3) Component of Soft-optics, including hard-optics drivers, Management Soft-optics, Routing Soft-optics and System Soft-optics 4) Key component of Routing and System Soft-optics, namely optical routing and signaling (including UNI/NNI and GMPLS signaling). In summary, the soft-optics on a new generation of OXC's enables Intelligent Optical Networks to provide just-in-time service delivery and fast restoration, and real-time capacity management that eliminates stranded bandwidth. It reduces operational costs and provides new revenue opportunities.

  18. Historical Post Office Directory Parser (POD Parser Software From the AddressingHistory Project

    Directory of Open Access Journals (Sweden)

    Nicola Osborne

    2014-07-01

    Full Text Available The POD Parser is Python software for parsing the OCR’d (optical character recognised text of digitised historical Scottish Post Office Directories (PODs to produce a consistent structured format for the data and for geocoding each address. The software was developed as part of the AddressingHistory project which sought to combine digitised historic directories with digitised and georeferenced historic maps.  The software has potential for reuse in multiple research contexts where historical post office directory data is relevant, and is therefore particularly of use in historical research into social, economic or demographic trends. The POD Parser is currently designed for use with Scottish directories but is extensible, perhaps with some adaptation, to use with other similarly formatted materials such as the English Trade Directories.

  19. Roadmap on optical energy conversion

    Science.gov (United States)

    Boriskina, Svetlana V.; Green, Martin A.; Catchpole, Kylie; Yablonovitch, Eli; Beard, Matthew C.; Okada, Yoshitaka; Lany, Stephan; Gershon, Talia; Zakutayev, Andriy; Tahersima, Mohammad H.; Sorger, Volker J.; Naughton, Michael J.; Kempa, Krzysztof; Dagenais, Mario; Yao, Yuan; Xu, Lu; Sheng, Xing; Bronstein, Noah D.; Rogers, John A.; Alivisatos, A. Paul; Nuzzo, Ralph G.; Gordon, Jeffrey M.; Wu, Di M.; Wisser, Michael D.; Salleo, Alberto; Dionne, Jennifer; Bermel, Peter; Greffet, Jean-Jacques; Celanovic, Ivan; Soljacic, Marin; Manor, Assaf; Rotschild, Carmel; Raman, Aaswath; Zhu, Linxiao; Fan, Shanhui; Chen, Gang

    2016-07-01

    For decades, progress in the field of optical (including solar) energy conversion was dominated by advances in the conventional concentrating optics and materials design. In recent years, however, conceptual and technological breakthroughs in the fields of nanophotonics and plasmonics combined with a better understanding of the thermodynamics of the photon energy-conversion processes reshaped the landscape of energy-conversion schemes and devices. Nanostructured devices and materials that make use of size quantization effects to manipulate photon density of states offer a way to overcome the conventional light absorption limits. Novel optical spectrum splitting and photon-recycling schemes reduce the entropy production in the optical energy-conversion platforms and boost their efficiencies. Optical design concepts are rapidly expanding into the infrared energy band, offering new approaches to harvest waste heat, to reduce the thermal emission losses, and to achieve noncontact radiative cooling of solar cells as well as of optical and electronic circuitries. Light-matter interaction enabled by nanophotonics and plasmonics underlie the performance of the third- and fourth-generation energy-conversion devices, including up- and down-conversion of photon energy, near-field radiative energy transfer, and hot electron generation and harvesting. Finally, the increased market penetration of alternative solar energy-conversion technologies amplifies the role of cost-driven and environmental considerations. This roadmap on optical energy conversion provides a snapshot of the state of the art in optical energy conversion, remaining challenges, and most promising approaches to address these challenges. Leading experts authored 19 focused short sections of the roadmap where they share their vision on a specific aspect of this burgeoning research field. The roadmap opens up with a tutorial section, which introduces major concepts and terminology. It is our hope that the roadmap

  20. Roadmap on optical energy conversion

    Energy Technology Data Exchange (ETDEWEB)

    Boriskina, Svetlana V.; Green, Martin A.; Catchpole, Kylie; Yablonovitch, Eli; Beard, Matthew C.; Okada, Yoshitaka; Lany, Stephan; Gershon, Talia; Zakutayev, Andriy; Tahersima, Mohammad H.; Sorger, Volker J.; Naughton, Michael J.; Kempa, Krzysztof; Dagenais, Mario; Yao, Yuan; Xu, Lu; Sheng, Xing; Bronstein, Noah D.; Rogers, John A.; Alivisatos, A. Paul; Nuzzo, Ralph G.; Gordon, Jeffrey M.; Wu, Di M.; Wisser, Michael D.; Salleo, Alberto; Dionne, Jennifer; Bermel, Peter; Greffet, Jean-Jacques; Celanovic, Ivan; Soljacic, Marin; Manor, Assaf; Rotschild, Carmel; Raman, Aaswath; Zhu, Linxiao; Fan, Shanhui; Chen, Gang

    2016-06-24

    For decades, progress in the field of optical (including solar) energy conversion was dominated by advances in the conventional concentrating optics and materials design. In recent years, however, conceptual and technological breakthroughs in the fields of nanophotonics and plasmonics combined with a better understanding of the thermodynamics of the photon energy-conversion processes reshaped the landscape of energy-conversion schemes and devices. Nanostructured devices and materials that make use of size quantization effects to manipulate photon density of states offer a way to overcome the conventional light absorption limits. Novel optical spectrum splitting and photon-recycling schemes reduce the entropy production in the optical energy-conversion platforms and boost their efficiencies. Optical design concepts are rapidly expanding into the infrared energy band, offering new approaches to harvest waste heat, to reduce the thermal emission losses, and to achieve noncontact radiative cooling of solar cells as well as of optical and electronic circuitries. Light-matter interaction enabled by nanophotonics and plasmonics underlie the performance of the third- and fourth-generation energy-conversion devices, including up- and down-conversion of photon energy, near-field radiative energy transfer, and hot electron generation and harvesting. Finally, the increased market penetration of alternative solar energy-conversion technologies amplifies the role of cost-driven and environmental considerations. This roadmap on optical energy conversion provides a snapshot of the state of the art in optical energy conversion, remaining challenges, and most promising approaches to address these challenges. Leading experts authored 19 focused short sections of the roadmap where they share their vision on a specific aspect of this burgeoning research field. The roadmap opens up with a tutorial section, which introduces major concepts and terminology. It is our hope that the roadmap

  1. A Review of Membrane Optics Research

    Science.gov (United States)

    2007-11-02

    ADDRESS(ES) 10. SPONSOR/MONITOR’S ACRONYM(S) Air Force Research Laboratory AFRL/ DESE 3550 Aberdeen Avenue SE Kirtland AFB, NM 87117-5776 11. SPONSOR...AFRL-DE-PS- AFRL-DE-PS- TM-2005-1002 TM-2005-1002 A Review of Membrane Optics Research James M. Wilkes Dan K. Marker 12 April 2005 Technical...Memorandum APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED. AIR FORCE RESEARCH LABORATORY Directed Energy Directorate 3550 Aberdeen Ave SE AIR FORCE

  2. IP ADDRESS AUTOCONFIGURATION FOR WIRELESS AD HOC NETWORKS

    Institute of Scientific and Technical Information of China (English)

    阿姆贾德

    2002-01-01

    A novel mechanism was specified by which a node in ad hoc network may autoconfigure an IP address which is unique throughout the mobile ad hoc network. This new algorithm imposes less and constant overhead and delay in obtaining an IP address, and fully utilizes the available addresses space of an ad hoc network, and independent of the existing routing protocol, and less prone to security threats. Moreover, a new Join/Leave mechanism was proposed as an enhancement to the new IP address autoconfiguration algorithm, to support the overall operation of the existing routing protocol of wireless ad hoc networks.

  3. Optical aeronomy

    Science.gov (United States)

    Solomon, Stanley C.

    1991-01-01

    Optical measurements of thermospheric and ionospheric processes and their interpretation are reviewed and the chemical reactions and their effects on emissions are discussed. Also included are the phenomena which excite the airglow and aurora, i.e., the solar UV/EUV flux and auroral particle precipitation. Consideration is given to solar flux, atomic emissions, molecular emissions, hydrogen geocorona, and molecular oxygen and the green line nightglow.

  4. Applied Optics

    OpenAIRE

    Han, M; Wang, Anbo

    2004-01-01

    A straightforward theory is presented to accurately model the light inferences in a low-finesse multimode fiber extrinsic Fabry-Perot (FP) interferometer. The effect on the fringe visibility of the gap length, sensor structure imperfections, and modal power distributions is explored. The analysis is particularly useful in the design and optimization of sensors that use an extrinsic FP cavity as the sensing element. (C) 2004 Optical Society of America.

  5. Power optics

    Energy Technology Data Exchange (ETDEWEB)

    Apollonov, V V [A M Prokhorov General Physics Institute, Russian Academy of Sciences, Moscow (Russian Federation)

    2014-02-28

    By using the theory we developed in the early 1970s, a broad range of phenomena is considered for an optical surface of a solid body that is exposed to radiation arbitrarily varying in time and producing temperature fields, thermoelastic stresses and thermal deformations on the surface layer. The examination is based on the relations (which are similar to Duhamel's integral formula from the theory of heat conduction) between the quantities characterising the thermal stress state in any nonstationary regimes of energy input into a solid. A peculiar feature of the analysis of the thermal stress state in this case consists in the fact that this relation comprises time as a parameter, which in turn is a consequence of incoherence of the quasi-stationary problem of thermoelasticity. This phenomenon is particularly important for the optics of high-power, high-pulse repetition rate lasers, which are being actively developed. In the review, we have recently published in Laser Physics, the thermal stress state of a solid is analysed. In this state, time is treated as an independent variable used in differentiation. Such an approach greatly reduces the applicability of the method. The review published contains data on the use of capillary porous structures made of various materials with different degrees of the surface development. Moreover, such structures can be efficiently employed to increase the heat exchange at a temperature below the boiling point of the coolant. In the present review we discuss the dependences of the limiting laser intensities on the duration of a pulse or a pulse train, corresponding to the three stages of the state of the reflecting surface and leading to unacceptable elastic deformations of the surface, to the plastic yield of the material accompanied by the formation of residual stresses and to the melting of the surface layer. We also analyse the problem of heat exchange in the surface layer with a liquid metal coolant pumped through it

  6. Power optics

    Science.gov (United States)

    Apollonov, V. V.

    2014-02-01

    By using the theory we developed in the early 1970s, a broad range of phenomena is considered for an optical surface of a solid body that is exposed to radiation arbitrarily varying in time and producing temperature fields, thermoelastic stresses and thermal deformations on the surface layer. The examination is based on the relations (which are similar to Duhamel's integral formula from the theory of heat conduction) between the quantities characterising the thermal stress state in any nonstationary regimes of energy input into a solid. A peculiar feature of the analysis of the thermal stress state in this case consists in the fact that this relation comprises time as a parameter, which in turn is a consequence of incoherence of the quasi-stationary problem of thermoelasticity. This phenomenon is particularly important for the optics of high-power, high-pulse repetition rate lasers, which are being actively developed. In the review, we have recently published in Laser Physics, the thermal stress state of a solid is analysed. In this state, time is treated as an independent variable used in differentiation. Such an approach greatly reduces the applicability of the method. The review published contains data on the use of capillary porous structures made of various materials with different degrees of the surface development. Moreover, such structures can be efficiently employed to increase the heat exchange at a temperature below the boiling point of the coolant. In the present review we discuss the dependences of the limiting laser intensities on the duration of a pulse or a pulse train, corresponding to the three stages of the state of the reflecting surface and leading to unacceptable elastic deformations of the surface, to the plastic yield of the material accompanied by the formation of residual stresses and to the melting of the surface layer. We also analyse the problem of heat exchange in the surface layer with a liquid metal coolant pumped through it. The

  7. How nonimaging optics began

    Science.gov (United States)

    Winston, Roland

    2016-09-01

    Classical optics was traditionally the mapping of point sources by lenses, mirrors and occasionally holograms , i.e. making an image. The subject has had many famous scientists associated with it; Fermat, Huygens, Descartes, Hamilton just to name a few. By the mid 20th Century it was a well-developed field as exemplified by such luminaries as Walter T. Welford, Emil Wolf and many others. The theory of aberrations which addresses the imperfections of the mapping codified the state of the art. Then arose the need to collect energy, not just images. To the author's knowledge it can be traced back to WWII Germany with collection of infra-red radiation (the work by D. E. Williamson, was not published until 1952). The radiation collector, a simple right-circular cone, was a harbinger of things to come.

  8. Parallel optical sampler

    Energy Technology Data Exchange (ETDEWEB)

    Tauke-Pedretti, Anna; Skogen, Erik J; Vawter, Gregory A

    2014-05-20

    An optical sampler includes a first and second 1.times.n optical beam splitters splitting an input optical sampling signal and an optical analog input signal into n parallel channels, respectively, a plurality of optical delay elements providing n parallel delayed input optical sampling signals, n photodiodes converting the n parallel optical analog input signals into n respective electrical output signals, and n optical modulators modulating the input optical sampling signal or the optical analog input signal by the respective electrical output signals, and providing n successive optical samples of the optical analog input signal. A plurality of output photodiodes and eADCs convert the n successive optical samples to n successive digital samples. The optical modulator may be a photodiode interconnected Mach-Zehnder Modulator. A method of sampling the optical analog input signal is disclosed.

  9. Cross-layer design in optical networks

    CERN Document Server

    Brandt-Pearce, Maïté; Demeester, Piet; Saradhi, Chava

    2013-01-01

    Optical networks have become an integral part of the communications infrastructure needed to support society’s demand for high-speed connectivity.  Cross-Layer Design in Optical Networks addresses topics in optical network design and analysis with a focus on physical-layer impairment awareness and network layer service requirements, essential for the implementation and management of robust scalable networks.  The cross-layer treatment includes bottom-up impacts of the physical and lambda layers, such as dispersion, noise, nonlinearity, crosstalk, dense wavelength packing, and wavelength line rates, as well as top-down approaches to handle physical-layer impairments and service requirements.

  10. Optical medical imaging: from glass to man

    Science.gov (United States)

    Bradley, Mark

    2016-11-01

    A formidable challenge in modern respiratory healthcare is the accurate and timely diagnosis of lung infection and inflammation. The EPSRC Interdisciplinary Research Collaboration (IRC) `Proteus' seeks to address this challenge by developing an optical fibre based healthcare technology platform that combines physiological sensing with multiplexed optical molecular imaging. This technology will enable in situ measurements deep in the human lung allowing the assessment of tissue function and characterization of the unique signatures of pulmonary disease and is illustrated here with our in-man application of Optical Imaging SmartProbes and our first device Versicolour.

  11. Laser-induced damage in optical materials

    CERN Document Server

    Ristau, Detlev

    2014-01-01

    Dedicated to users and developers of high-powered systems, Laser-Induced Damage in Optical Materials focuses on the research field of laser-induced damage and explores the significant and steady growth of applications for high-power lasers in the academic, industrial, and military arenas. Written by renowned experts in the field, this book concentrates on the major topics of laser-induced damage in optical materials and most specifically addresses research in laser damage that occurs in the bulk and on the surface or the coating of optical components. It considers key issues in the field of hi

  12. Fibre Optic Protection System for Concrete Structures

    Institute of Scientific and Technical Information of China (English)

    J.S.Leng; A.Hameed; D.Winter; R.A.Barnes; G.C.Mays; G.F.Fernando

    2006-01-01

    The design concepts, modelling and implementation of various fibre optic sensor protection systems for development in concrete structures were investigated. Design concepts and on-site requirements for surface-mounted and embedded optical fibre sensor in concrete were addressed. Finite element (FE) modelling of selected sensor protection systems in strain-transfer efficiency from the structure to the sensing region was also studied. And experimental validation of specified sensor protection system was reported. Results obtained indicate that the protection system for the sensors performs adequately in concrete environment and there is very good correlation between results obtained by the protected fibre optic sensors and conventional electrical resistance strain gauges.

  13. Machine learning concepts in coherent optical communication systems

    DEFF Research Database (Denmark)

    Zibar, Darko; Schäffer, Christian G.

    2014-01-01

    Powerful statistical signal processing methods, used by the machine learning community, are addressed and linked to current problems in coherent optical communication. Bayesian filtering methods are presented and applied for nonlinear dynamic state tracking. © 2014 OSA.......Powerful statistical signal processing methods, used by the machine learning community, are addressed and linked to current problems in coherent optical communication. Bayesian filtering methods are presented and applied for nonlinear dynamic state tracking. © 2014 OSA....

  14. Machine learning concepts in coherent optical communication systems

    DEFF Research Database (Denmark)

    Zibar, Darko; Schäffer, Christian G.

    2014-01-01

    Powerful statistical signal processing methods, used by the machine learning community, are addressed and linked to current problems in coherent optical communication. Bayesian filtering methods are presented and applied for nonlinear dynamic state tracking. © 2014 OSA.......Powerful statistical signal processing methods, used by the machine learning community, are addressed and linked to current problems in coherent optical communication. Bayesian filtering methods are presented and applied for nonlinear dynamic state tracking. © 2014 OSA....

  15. Polymer scaffolds bearing azobenzene - Potential for optical information storage

    DEFF Research Database (Denmark)

    Hvilsted, Søren; Ramanujam, P.S.

    2001-01-01

    The fundamental optical storage mechanism of the laser light addressable azobenzene moiety is briefly introduced. A modular and flexible synthesis design furnishes polyester matrices covalently integrating cyanoazobenzene in regularly spaced side chains. Thin films of these materials are particul......The fundamental optical storage mechanism of the laser light addressable azobenzene moiety is briefly introduced. A modular and flexible synthesis design furnishes polyester matrices covalently integrating cyanoazobenzene in regularly spaced side chains. Thin films of these materials...

  16. 77 FR 11116 - Draft National Plan To Address Alzheimer's Disease

    Science.gov (United States)

    2012-02-24

    ... HUMAN SERVICES Draft National Plan To Address Alzheimer's Disease AGENCY: Office of the Assistant.... SUMMARY: HHS is soliciting public input on the draft National Plan to Address Alzheimer's Disease, which... Alzheimer's disease. Coordinate Alzheimer's disease research and services across all federal agencies...

  17. Addressing Disproportionality through Undoing Racism, Leadership Development, and Community Engagement

    Science.gov (United States)

    James, Joyce; Green, Deborah; Rodriguez, Carolyne; Fong, Rowena

    2008-01-01

    In 2005 the Texas 79th legislature passed Senate Bill 6, which included mandates to address disproportionality. This article will describe how the Texas Department of Family Protective Services in collaboration with Casey Family Programs' Texas State Strategy systems improvement initiative is addressing disproportionality statewide through…

  18. Importance of Addressing Sexuality in Certified Rehabilitation Counselor Practice

    Science.gov (United States)

    Kazukauskas, Kelly A.; Lam, Chow S.

    2009-01-01

    This study investigated Certified Rehabilitation Counselors' (CRCs) beliefs about the importance of addressing sexuality issues during rehabilitation. A modified version of the Family Life Sex Education Goals Questionnaire (FLSEGQ) was completed by 199 CRCs to determine which issues CRCs believe are most important to address. Six sexuality-related…

  19. 46 CFR 14.103 - Addresses of Coast Guard.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Addresses of Coast Guard. 14.103 Section 14.103 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY MERCHANT MARINE OFFICERS AND SEAMEN SHIPMENT AND DISCHARGE OF MERCHANT MARINERS General § 14.103 Addresses of Coast Guard. (a) U.S. postal mail: U.S....

  20. Addressable Macromolecular Architectures: Towards stimuli promoted motion at the nanoscale

    NARCIS (Netherlands)

    Kutnyanszky, Edit

    2012-01-01

    Addressable polymer structures play an increasingly important role in a variety of areas, such as surface engineering, drug delivery, and micro/nanofluidics. In these structures, addressability results from the sensitivity of incorporated polymer chains to variations in temperature, electric or magn

  1. Method for the electro-addressable functionalization of electrode arrays

    Energy Technology Data Exchange (ETDEWEB)

    Harper, Jason C.; Polsky, Ronen; Dirk, Shawn M.; Wheeler, David R.; Arango, Dulce C.; Brozik, Susan M.

    2015-12-15

    A method for preparing an electrochemical biosensor uses bias-assisted assembly of unreactive -onium molecules on an electrode array followed by post-assembly electro-addressable conversion of the unreactive group to a chemical or biological recognition group. Electro-addressable functionalization of electrode arrays enables the multi-target electrochemical sensing of biological and chemical analytes.

  2. A Comparison of Address Forms in American English and Chinese

    Institute of Scientific and Technical Information of China (English)

    孔莎

    2009-01-01

    As one of the most frequently used language forms in people's daily communication,the address form carries many different social semantic meanings.This paper aims to compare western and eastern cultures through a tentative study of address forms in American English and Chinese By finding theeir similarities and differences it will explore the deep structures of each culture.

  3. 5 CFR 432.104 - Addressing unacceptable performance.

    Science.gov (United States)

    2010-01-01

    ... PERFORMANCE BASED REDUCTION IN GRADE AND REMOVAL ACTIONS § 432.104 Addressing unacceptable performance. At any time during the performance appraisal cycle that an employee's performance is determined to be... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Addressing unacceptable performance....

  4. 43 CFR Appendix B to Part 2 - Internet Addresses

    Science.gov (United States)

    2010-10-01

    ... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false Internet Addresses B Appendix B to Part 2 Public Lands: Interior Office of the Secretary of the Interior RECORDS AND TESTIMONY; FREEDOM OF INFORMATION ACT Pt. 2, App. B Appendix B to Part 2—Internet Addresses 1. Department of the Interior (DOI)...

  5. Untranslatability; The Case of Pronouns of Address in Literature.

    Science.gov (United States)

    Anderman, Gunilla M.

    1993-01-01

    Focuses on pronouns of address, especially the second person singular, in which many European languages make distinctions according to the degree of familiarity between the speaker and the person addressed. Discusses the problems these distinctions present (especially in literary works) to translators who work in languages where such nuances are…

  6. Faculty Perceptions of Student Credibility Based on Email Addresses

    Science.gov (United States)

    Livermore, Jeffrey A.; Wiechowski, Linda S.; Scafe, Marla G.

    2011-01-01

    The purpose of this study was to evaluate faculty perceptions of student credibility based on email addresses. The survey was conducted at an upper division business school in Michigan where all students have completed at least two years of college courses. The survey results show that a student's selection of an email address does influence the…

  7. Student Perceptions of Peer Credibility Based on Email Addresses

    Science.gov (United States)

    Livermore, Jeffrey A.; Scafe, Marla G.; Wiechowski, Linda S.; Maier, David J.

    2013-01-01

    The purpose of this study was to evaluate students' perceptions of their peer's credibility based on email addresses. The survey was conducted at a community college in Michigan where all students were registered and actively taking at least one course. The survey results show that a student's selection of an email address does influence other…

  8. Student Perceptions of Faculty Credibility Based on Email Addresses

    Science.gov (United States)

    Livermore, Jeffrey A.; Scafe, Marla G.; Wiechowski, Linda S.

    2010-01-01

    The purpose of this study was to evaluate students' perceptions of faculty credibility based on email addresses. The survey was conducted at an upper division business school in Michigan where all students have completed at least two years of college courses. The survey results show that a faculty member's selection of an email address does…

  9. Terms of Address in the Chinese Business Enterprise

    Science.gov (United States)

    Huang, Xiaoyan; Sultan, Robert

    2014-01-01

    This study examines terms of address currently used by employees of Chinese business enterprises. The authors find that a speaker's address selections are related significantly to the gender of the speaker, the location of the enterprise in Eastern or Western China, and the ownership type of the enterprise; that is, whether the enterprise is…

  10. The "Depreciation" and "Appreciation" of Some Address Terms in China.

    Science.gov (United States)

    Zhucheng, Ju

    1991-01-01

    Examines how the cultural revolution in China has changed, to some extent, the rules governing the use of address terms, discussing the close interrelation between the use of address terms and cultural values and how the change in mental outlook has led to the depreciation or appreciation of certain terms. (Author/CB)

  11. The (Im)possibility of the Project: Radford Address

    Science.gov (United States)

    Green, Bill

    2010-01-01

    In this address, the author engages both with the possibility "and" the impossibility of the educational project--and suggests something of what it means to say this. His presentation is specifically addressed to the theme of the (im)possibility of the educational project. He draws from philosophy, literature, psychoanalysis and history, as well…

  12. Life Goals in Vision Rehabilitation: Are They Addressed and How?

    Science.gov (United States)

    Cimarolli, Verena R.; Boerner, Kathrin; Wang, Shu-wen

    2006-01-01

    This study explored if and how vision rehabilitation services address important life goals of young and middle-aged adults who are visually impaired. It found that services that teach functional skills and offer psychosocial therapeutic-type services were instrumental in addressing life goals and that independence-related goals were most often…

  13. Memory Compression Techniques for Network Address Management in MPI

    Energy Technology Data Exchange (ETDEWEB)

    Guo, Yanfei; Archer, Charles J.; Blocksome, Michael; Parker, Scott; Bland, Wesley; Raffenetti, Ken; Balaji, Pavan

    2017-05-29

    MPI allows applications to treat processes as a logical collection of integer ranks for each MPI communicator, while internally translating these logical ranks into actual network addresses. In current MPI implementations the management and lookup of such network addresses use memory sizes that are proportional to the number of processes in each communicator. In this paper, we propose a new mechanism, called AV-Rankmap, for managing such translation. AV-Rankmap takes advantage of logical patterns in rank-address mapping that most applications naturally tend to have, and it exploits the fact that some parts of network address structures are naturally more performance critical than others. It uses this information to compress the memory used for network address management. We demonstrate that AV-Rankmap can achieve performance similar to or better than that of other MPI implementations while using significantly less memory.

  14. Hamilton optics: transformational theory of optics

    Science.gov (United States)

    Winston, Roland; Ge, Wenjun

    2013-09-01

    In 1824 William Rowan Hamilton presented a memoir to the Royal Irish Academy on Optics(Trans. R. Irish. Acacamy, XV, 1828), which was the foundation for transformational optics, classical mechanics, nonimaging optics and thermodynamical foundation of nonimaging optics,etc. It is useful for us even in 2013 to revisit the Hamilton resolution.

  15. Volumetric optical coherence microscopy enabled by aberrated optics (Conference Presentation)

    Science.gov (United States)

    Mulligan, Jeffrey A.; Liu, Siyang; Adie, Steven G.

    2017-02-01

    Optical coherence microscopy (OCM) is an interferometric imaging technique that enables high resolution, non-invasive imaging of 3D cell cultures and biological tissues. Volumetric imaging with OCM suffers a trade-off between high transverse resolution and poor depth-of-field resulting from defocus, optical aberrations, and reduced signal collection away from the focal plane. While defocus and aberrations can be compensated with computational methods such as interferometric synthetic aperture microscopy (ISAM) or computational adaptive optics (CAO), reduced signal collection must be physically addressed through optical hardware. Axial scanning of the focus is one approach, but comes at the cost of longer acquisition times, larger datasets, and greater image reconstruction times. Given the capabilities of CAO to compensate for general phase aberrations, we present an alternative method to address the signal collection problem without axial scanning by using intentionally aberrated optical hardware. We demonstrate the use of an astigmatic spectral domain (SD-)OCM imaging system to enable single-acquisition volumetric OCM in 3D cell culture over an extended depth range, compared to a non-aberrated SD-OCM system. The transverse resolution of the non-aberrated and astigmatic imaging systems after application of CAO were 2 um and 2.2 um, respectively. The depth-range of effective signal collection about the nominal focal plane was increased from 100 um in the non-aberrated system to over 300 um in the astigmatic system, extending the range over which useful data may be acquired in a single OCM dataset. We anticipate that this method will enable high-throughput cellular-resolution imaging of dynamic biological systems over extended volumes.

  16. Assessing the Role of Small-Scale Bio-Optical and Bio-Acoustical Distributions in Upper Ocean Biological and Optical Processes

    Science.gov (United States)

    2016-06-14

    addressed that goal by examining specific scientific questions that relate the distribution and variability in sub-1m scale bio-optical properties with...dynamics, optical and acoustical signal propagation, and remote sensing. The collaborative work we have been conducting within this project is...TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) Oregon State University,College of Oceanic and Atmospheric

  17. Quantum Optics

    CERN Document Server

    Garrison, J C

    2008-01-01

    Quantum optics, i.e. the interaction of individual photons with matter, began with the discoveries of Planck and Einstein, but in recent years it has expanded beyond pure physics to become an important driving force for technological innovation. This book serves the broader readership growing out of this development by starting with an elementary description of the underlying physics and then building up a more advanced treatment. The reader is led from the quantum theory of thesimple harmonic oscillator to the application of entangled states to quantum information processing. An equally impor

  18. Optical devices

    Energy Technology Data Exchange (ETDEWEB)

    Chaves, Julio C.; Falicoff, Waqidi; Minano, Juan C.; Benitez, Pablo; Dross, Oliver; Parkyn, Jr., William A.

    2010-07-13

    An optical manifold for efficiently combining a plurality of blue LED outputs to illuminate a phosphor for a single, substantially homogeneous output, in a small, cost-effective package. Embodiments are disclosed that use a single or multiple LEDs and a remote phosphor, and an intermediate wavelength-selective filter arranged so that backscattered photoluminescence is recycled to boost the luminance and flux of the output aperture. A further aperture mask is used to boost phosphor luminance with only modest loss of luminosity. Alternative non-recycling embodiments provide blue and yellow light in collimated beams, either separately or combined into white.

  19. Nonlinear Optics in Doped Silica Glass Integrated Waveguide Structures

    CERN Document Server

    Duchesne, David; Razzari, Luca; Morandotti, Roberto; Little, Brent; Chu, Sai T; Moss, David J

    2015-01-01

    Integrated photonic technologies are rapidly becoming an important and fundamental milestone for wideband optical telecommunications. Future optical networks have several critical requirements, including low energy consumption, high efficiency, greater bandwidth and flexibility, which must be addressed in a compact form factor.

  20. HCMT models of optical microring-resonator circuits

    NARCIS (Netherlands)

    Lohmeyer, Manfred

    2010-01-01

    Circuits of dielectric integrated optical microring resonators are addressed through a two-dimensional hybrid analytical/numerical coupled mode theory (HCMT) model. Analytical modes of all straight and curved cores form templates for the optical fields of the entire circuits. Our variational techniq

  1. EDITORIAL: Optical orientation Optical orientation

    Science.gov (United States)

    SAME ADDRESS *, Yuri; Landwehr, Gottfried

    2008-11-01

    priority of the discovery in the literature, which was partly caused by the existence of the Iron Curtain. I had already enjoyed contact with Boris in the 1980s when the two volumes of Landau Level Spectroscopy were being prepared [2]. He was one of the pioneers of magneto-optics in semiconductors. In the 1950s the band structure of germanium and silicon was investigated by magneto-optical methods, mainly in the United States. No excitonic effects were observed and the band structure parameters were determined without taking account of excitons. However, working with cuprous oxide, which is a direct semiconductor with a relative large energy gap, Zakharchenya and his co-worker Seysan showed that in order to obtain correct band structure parameters, it is necessary to take excitons into account [3]. About 1970 Boris started work on optical orientation. Early work by Hanle in Germany in the 1920s on the depolarization of luminescence in mercury vapour by a transverse magnetic field was not appreciated for a long time. Only in the late 1940s did Kastler and co-workers in Paris begin a systematic study of optical pumping, which led to the award of a Nobel prize. The ideas of optical pumping were first applied by Georges Lampel to solid state physics in 1968. He demonstrated optical orientation of free carriers in silicon. The detection method was nuclear magnetic resonance; optically oriented free electrons dynamically polarized the 29Si nuclei of the host lattice. The first optical detection of spin orientation was demonstrated by with the III-V semiconductor GaSb by Parsons. Due to the various interaction mechanisms of spins with their environment, the effects occurring in semiconductors are naturally more complex than those in atoms. Optical detection is now the preferred method to detect spin alignment in semiconductors. The orientation of spins in crystals pumped with circularly polarized light is deduced from the degree of circular polarization of the recombination

  2. Duplicate Address Detection Table in IPv6 Mobile Networks

    Science.gov (United States)

    Alisherov, Farkhod; Kim, Taihoon

    In IP networks, each computer or communication equipment needs an IP address. To supply enough IP addresses, the new Internet protocol IPv6 is used in next generatoion mobile communication. Although IPv6 improves the existing IPv4 Internet protocol, Duplicate Address Detection (DAD) mechanism may consume resources and suffer from long delay. DAD is used to ensure whether the IP address is unique or not. When a mobile node performs an inter-domain handoff, it will first generate a new IP and perform a DAD procedure. The DAD procedure not only wastes time but also increases the signaling load on Internet. In this paper, the author proposes a new DAD mechanism to speed up the DAD procedure. A DAD table is created in access or mobility routers in IP networks and record all IP addresses of the area. When a new IP address needs to perform DAD, it can just search in the DAD table to confirm the uniqueness of the address.

  3. Optical Backplane Interconnection

    Science.gov (United States)

    Hendricks, Herbert D.

    1991-01-01

    Optical backplane interconnection (OBIT), method of optically interconnecting many parallel outputs from data processor to many parallel inputs of other data processors by optically changing wavelength of output optical beam. Requires only one command: exact wavelength necessary to make connection between two desired processors. Many features, including smallness advantageous to incorporate OBIT into integrated optical device. Simplifies or eliminates wiring and speeds transfer of data over existing electrical or optical interconnections. Computer hookups and fiber-optical communication networks benefit from concept.

  4. IPv6 Addressing Proxy: Mapping Native Addressing from Legacy Technologies and Devices to the Internet of Things (IPv6

    Directory of Open Access Journals (Sweden)

    Peter Kirstein

    2013-05-01

    Full Text Available Sensors utilize a large number of heterogeneous technologies for a varied set of application environments. The sheer number of devices involved requires that this Internet be the Future Internet, with a core network based on IPv6 and a higher scalability in order to be able to address all the devices, sensors and things located around us. This capability to connect through IPv6 devices, sensors and things is what is defining the so-called Internet of Things (IoT. IPv6 provides addressing space to reach this ubiquitous set of sensors, but legacy technologies, such as X10, European Installation Bus (EIB, Controller Area Network (CAN and radio frequency ID (RFID from the industrial, home automation and logistic application areas, do not support the IPv6 protocol. For that reason, a technique must be devised to map the sensor and identification technologies to IPv6, thus allowing homogeneous access via IPv6 features in the context of the IoT. This paper proposes a mapping between the native addressing of each technology and an IPv6 address following a set of rules that are discussed and proposed in this work. Specifically, the paper presents a technology-dependent IPv6 addressing proxy, which maps each device to the different subnetworks built under the IPv6 prefix addresses provided by the internet service provider for each home, building or user. The IPv6 addressing proxy offers a common addressing environment based on IPv6 for all the devices, regardless of the device technology. Thereby, this offers a scalable and homogeneous solution to interact with devices that do not support IPv6 addressing. The IPv6 addressing proxy has been implemented in a multi-protocol Sensors 2013, 13 6688 card and evaluated successfully its performance, scalability and interoperability through a protocol built over IPv6.

  5. IPv6 addressing proxy: mapping native addressing from legacy technologies and devices to the Internet of Things (IPv6).

    Science.gov (United States)

    Jara, Antonio J; Moreno-Sanchez, Pedro; Skarmeta, Antonio F; Varakliotis, Socrates; Kirstein, Peter

    2013-05-17

    Sensors utilize a large number of heterogeneous technologies for a varied set of application environments. The sheer number of devices involved requires that this Internet be the Future Internet, with a core network based on IPv6 and a higher scalability in order to be able to address all the devices, sensors and things located around us. This capability to connect through IPv6 devices, sensors and things is what is defining the so-called Internet of Things (IoT). IPv6 provides addressing space to reach this ubiquitous set of sensors, but legacy technologies, such as X10, European Installation Bus (EIB), Controller Area Network (CAN) and radio frequency ID (RFID) from the industrial, home automation and logistic application areas, do not support the IPv6 protocol. For that reason, a technique must be devised to map the sensor and identification technologies to IPv6, thus allowing homogeneous access via IPv6 features in the context of the IoT. This paper proposes a mapping between the native addressing of each technology and an IPv6 address following a set of rules that are discussed and proposed in this work. Specifically, the paper presents a technology-dependent IPv6 addressing proxy, which maps each device to the different subnetworks built under the IPv6 prefix addresses provided by the internet service provider for each home, building or user. The IPv6 addressing proxy offers a common addressing environment based on IPv6 for all the devices, regardless of the device technology. Thereby, this offers a scalable and homogeneous solution to interact with devices that do not support IPv6 addressing. The IPv6 addressing proxy has been implemented in a multi-protocol Sensors 2013, 13 6688 card and evaluated successfully its performance, scalability and interoperability through a protocol built over IPv6.

  6. Addressing the Barriers to Agile Development in DoD

    Science.gov (United States)

    2015-05-01

    pmodigliani@mitre.org May 2015 Addressing the Barriers to Agile Development in DoD MITRE Defense Agile Acquisition Guide Naval Postgraduate School’s...COVERED 00-00-2015 to 00-00-2015 4. TITLE AND SUBTITLE Addressing the Barriers to Agile Development in DoD 5a. CONTRACT NUMBER 5b. GRANT...NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS

  7. Fiber Optic-Based Refractive Index Sensing at INESC Porto

    Science.gov (United States)

    Jorge, Pedro A. S.; Silva, Susana O.; Gouveia, Carlos; Tafulo, Paula; Coelho, Luis; Caldas, Paulo; Viegas, Diana; Rego, Gaspar; Baptista, José M.; Santos, José L.; Frazão, Orlando

    2012-01-01

    A review of refractive index measurement based on different types of optical fiber sensor configurations and techniques is presented. It addresses the main developments in the area, with particular focus on results obtained at INESC Porto, Portugal. The optical fiber sensing structures studied include those based on Bragg and long period gratings, on micro-interferometers, on plasmonic effects in fibers and on multimode interference in a large spectrum of standard and microstructured optical fibers. PMID:22969405

  8. Optical Instruments

    Science.gov (United States)

    1990-01-01

    Precision Lapping and Optical Co. has developed a wide variety of hollow retroreflector systems for applications involving the entire optical spectrum; they are, according to company literature, cheaper, more accurate, lighter and capable of greater size than solid prisms. Precision Lapping's major customers are aerospace and defense companies, government organizations, R&D and commercial instrument companies. For example, Precision Lapping supplies hollow retroreflectors for the laser fire control system of the Army's Abrams tank, and retroreflectors have been and are being used in a number of space tests relative to the Air Force's Strategic Defense Initiative research program. An example of a customer/user is Chesapeake Laser Systems, producer of the Laser Tracker System CMS-2000, which has applications in SDI research and industrial robotics. Another customer is MDA Scientific, Inc., manufacturer of a line of toxic gas detection systems used to monitor hazardous gases present in oil fields, refineries, offshore platforms, chemical plants, waste storage sites and other locations where gases are released into the environment.

  9. Find Shortage Areas: HPSA & MUA/P by Address

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Find Shortage Areas: Health Professional Shortage Area (HPSA) and Medically Underserved Area/Population (MUA/P) by Address tool helps you determine if a specific...

  10. How You Can Help Your Child Avoid & Address Bullying

    Science.gov (United States)

    ... How You Can Help Your Child Avoid & Address Bullying Page Content Article Body Whether on the school ... other ways. Getting that response usually makes the bullying behavior continue. Your child should try to keep ...

  11. North Central Texas Cities Renew Partnership to Address Environmental Issues

    Science.gov (United States)

    DALLAS - (Feb. 12, 2014) The U.S. Environmental Protection Agency (EPA) and the North Central Texas Council of Governments (NCTCOG) are working with cities in north central Texas to address key environmental issues in the area. Several cities formed

  12. Science channel: addressing evolutionary questions using whole genome sequencing

    OpenAIRE

    Kentaro K. Shimizu; Akiyama, Reiko; Hatakeyama, Masaomi

    2015-01-01

    Recently, technical advance in gene analysis opened a new perspective in research on evolution. At the University of Zurich in Switzerland, we visited the Evolutionary Ecological Genomics group and Functional Genomics Center Zurich addressing evolutionary questions using latest technologies.

  13. Management of Address Information to Improve Quality of Customer Contact

    Institute of Scientific and Technical Information of China (English)

    CHANG Taiwoo; PARK Jinwoo; PARK Chankwon; JEONG Hanil; NAM Yunseok

    2004-01-01

    Customer relationship management systems are gaining importance in today's business environment since customer satisfaction is crucial to the success of an enterprise, and especially so in e-business environment where customers can find substitute suppliers quite easily. In CRM, the quality of customer information is very important, and the address information even more so. It is because the address information plays a major role for customer contact channel and for timely and effective marketing service. Furthermore, it gives the basic source of geographic information for the offline delivery, the terminal activity of the e-commerce. In this study, we analyze various standards and proposals for the address information, and propose data models for the management of the information focusing on address components, and proto-type systems for management and service.

  14. Factors Affecting Behaviours that address HIV Risk among Nigerian ...

    African Journals Online (AJOL)

    Factors Affecting Behaviours that address HIV Risk among Nigerian University Students. ... Design: Cross-sectional survey. ... Main outcome measures: Sexual behavior and condom use, knowledge about correct condom use, intention of ...

  15. Address Points, Published in Not Provided, Shield Engineering, Inc..

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Address Points dataset as of Not Provided. Data by this publisher are often provided in Not Applicable coordinate system; in a Not Applicable projection; The...

  16. Identifiable Data Files - Name and Address File and Vital...

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Names and Addresses File and the Vital Status File are subsets of the data elements in the Enrollment Database (EDB). The particular information in each file is...

  17. Ballistic bit addressing in a magnetic memory cell array

    OpenAIRE

    Schumacher, H. W.

    2005-01-01

    A ringing free bit addressing scheme for magnetic memories like MRAM (magnetic random access memory) is proposed. As in standard MRAM addressing schemes the switching of a selected cell is obtained by the combination of two half-select field pulses. Numerical solutions of a single spin model of an MRAM cell show that the pulse parameters can be chosen such that the application of the half select pulse induces a full precessional turn of the magnetization (no switch) whereas the superposition ...

  18. Positional error in automated geocoding of residential addresses

    Directory of Open Access Journals (Sweden)

    Talbot Thomas O

    2003-12-01

    Full Text Available Abstract Background Public health applications using geographic information system (GIS technology are steadily increasing. Many of these rely on the ability to locate where people live with respect to areas of exposure from environmental contaminants. Automated geocoding is a method used to assign geographic coordinates to an individual based on their street address. This method often relies on street centerline files as a geographic reference. Such a process introduces positional error in the geocoded point. Our study evaluated the positional error caused during automated geocoding of residential addresses and how this error varies between population densities. We also evaluated an alternative method of geocoding using residential property parcel data. Results Positional error was determined for 3,000 residential addresses using the distance between each geocoded point and its true location as determined with aerial imagery. Error was found to increase as population density decreased. In rural areas of an upstate New York study area, 95 percent of the addresses geocoded to within 2,872 m of their true location. Suburban areas revealed less error where 95 percent of the addresses geocoded to within 421 m. Urban areas demonstrated the least error where 95 percent of the addresses geocoded to within 152 m of their true location. As an alternative to using street centerline files for geocoding, we used residential property parcel points to locate the addresses. In the rural areas, 95 percent of the parcel points were within 195 m of the true location. In suburban areas, this distance was 39 m while in urban areas 95 percent of the parcel points were within 21 m of the true location. Conclusion Researchers need to determine if the level of error caused by a chosen method of geocoding may affect the results of their project. As an alternative method, property data can be used for geocoding addresses if the error caused by traditional methods is

  19. Addressing Limited Data for Textual Entailment Across Domains

    OpenAIRE

    Shivade, Chaitanya; Raghavan, Preethi; Patwardhan, Siddharth

    2016-01-01

    We seek to address the lack of labeled data (and high cost of annotation) for textual entailment in some domains. To that end, we first create (for experimental purposes) an entailment dataset for the clinical domain, and a highly competitive supervised entailment system, ENT, that is effective (out of the box) on two domains. We then explore self-training and active learning strategies to address the lack of labeled data. With self-training, we successfully exploit unlabeled data to improve ...

  20. A Comparative Study of Chinese and American Ways of Address

    Institute of Scientific and Technical Information of China (English)

    李静

    2009-01-01

    From a cross-cultural pragmatic perspective,this paper nakes a comparative study on American and Chinese ways of address,and finds that due to different cultural values,languages differ in the actual realization of address strategies and modifications,which leads to varied interactional styles,and thus holds that there exist distinctive cultural differences in the interactional styles of verbal behaviors,which challenges the universality of pragmatic rules among different languages and cultures.

  1. Implementation of comprehensive address generator for digital signal processor

    Science.gov (United States)

    Kini, Ramesh M.; David, Sumam S.

    2013-03-01

    The performance of signal-processing algorithms implemented in hardware depends on the efficiency of datapath, memory speed and address computation. Pattern of data access in signal-processing applications is complex and it is desirable to execute the innermost loop of a kernel in a single-clock cycle. This necessitates the generation of typically three addresses per clock: two addresses for data sample/coefficient and one for the storage of processed data. Most of the Reconfigurable Processors, designed for multimedia, focus on mapping the multimedia applications written in a high-level language directly on to the reconfigurable fabric, implying the use of same datapath resources for kernel processing and address generation. This results in inconsistent and non-optimal use of finite datapath resources. Presence of a set of dedicated, efficient Address Generator Units (AGUs) helps in better utilisation of the datapath elements by using them only for kernel operations; and will certainly enhance the performance. This article focuses on the design and application-specific integrated circuit implementation of address generators for complex addressing modes required by multimedia signal-processing kernels. A novel algorithm and hardware for AGU is developed for accessing data and coefficients in a bit-reversed order for fast Fourier transform kernel spanning over log 2 N stages, AGUs for zig-zag-ordered data access for entropy coding after Discrete Cosine Transform (DCT), convolution kernels with stored/streaming data, accessing data for motion estimation using the block-matching technique and other conventional addressing modes. When mapped to hardware, they scale linearly in gate complexity with increase in the size.

  2. Addressing an IDW Nightmare in a Snap (registered trademark)

    Science.gov (United States)

    2011-05-12

    Addressing an IDW Nightmare in a Snap® Presenters: Larry Jordan (ARCADIS/Malcolm Pirnie) Jennifer Wilbur (Headquarters Marine Corps) May 12, 2011...MAY 2011 2. REPORT TYPE 3. DATES COVERED 00-00-2011 to 00-00-2011 4. TITLE AND SUBTITLE Addressing an IDW Nightmare in a Snap? 5a. CONTRACT...circumference • Team developed costs for various scenarios to deal with large volumes of purge water 12 Miles IDW Holding Area Boring Location

  3. Addressable-Matrix Integrated-Circuit Test Structure

    Science.gov (United States)

    Sayah, Hoshyar R.; Buehler, Martin G.

    1991-01-01

    Method of quality control based on use of row- and column-addressable test structure speeds collection of data on widths of resistor lines and coverage of steps in integrated circuits. By use of straightforward mathematical model, line widths and step coverages deduced from measurements of electrical resistances in each of various combinations of lines, steps, and bridges addressable in test structure. Intended for use in evaluating processes and equipment used in manufacture of application-specific integrated circuits.

  4. The role of game design in addressing behavioural change

    OpenAIRE

    Coulton, Paul

    2015-01-01

    With the increasing promotion of design for behavioural change as a means of addressing the complex societal and environmental challenges the world currently faces, comes the associated challenge of developing appropriate design techniques to achieve such change. Whilst many designers have sought inspiration from game design they have often drawn from the techniques associated with ‘gamification’ which has been heavily criticised as manipulative and only capable of addressing simplistic extri...

  5. Advances in nonlinear optics

    CERN Document Server

    Chen, Xianfeng; Zeng, Heping; Guo, Qi; She, Weilong

    2015-01-01

    This book presents an overview of the state of the art of nonlinear optics from weak light nonlinear optics, ultrafast nonlinear optics to electro-optical theory and applications. Topics range from the fundamental studies of the interaction between matter and radiation to the development of devices, components, and systems of tremendous commercial interest for widespread applications in optical telecommunications, medicine, and biotechnology.

  6. Congenital optic tract hypoplasia.

    Science.gov (United States)

    Hatsukawa, Yoshikazu; Fujio, Takahiro; Nishikawa, Masanori; Taylor, David

    2015-08-01

    We report a case of isolated unilateral optic tract hypoplasia, described only twice previously. Bilateral optic disk hypoplasia was seen ophthalmoscopically and visual field studies showed an incongruous right homonymous hemianopia. Magnetic resonance imaging showed bilateral hypoplasia of both optic nerves and the left optic tract. Spectral domain optical coherence tomography mapping correlated well with the visual field studies.

  7. Optical manifold

    Science.gov (United States)

    Falicoff, Waqidi; Chaves, Julio C.; Minano, Juan Carlos; Benitez, Pablo; Dross, Oliver; Parkyn, Jr., William A.

    2010-02-23

    Optical systems are described that have at least one source of a beam of blue light with divergence under 15.degree.. A phosphor emits yellow light when excited by the blue light. A collimator is disposed with the phosphor and forms a yellow beam with divergence under 15.degree.. A dichroic filter is positioned to transmit the beam of blue light to the phosphor and to reflect the beam of yellow light to an exit aperture. In different embodiments, the beams of blue and yellow light are incident upon said filter with central angles of 15.degree., 22.degree., and 45.degree.. The filter may reflect all of one polarization and part of the other polarization, and a polarization rotating retroreflector may then be provided to return the unreflected light to the filter.

  8. Evaluating the Use of Optical Coherence Tomography in Optic Neuritis

    Directory of Open Access Journals (Sweden)

    Fiona Costello

    2011-01-01

    Full Text Available Optic neuritis (ON is an inflammatory optic nerve injury, which is strongly associated with multiple sclerosis (MS. Axonal damage in the optic nerve manifests as retinal nerve fiber layer (RNFL deficits, which can be readily quantified with optical coherence tomography (OCT. The RNFL represents the most proximal region of the afferent visual pathway; and, as such, is a unique region of the central nervous system (CNS because it lacks myelin. Changes in retinal integrity can be correlated with reliable and quantifiable visual outcomes to provide a structural-functional paradigm of CNS injury. Because the eye provides a unique “view” into the effects of CNS inflammation, the ON “system model” may provide greater understanding about disease mechanisms, which underpin disability in MS. This review addresses the applications of OCT in study of ON patients, with specific reference to the published reports to date. The future role of OCT is discussed, both in terms of the potential gains and certain challenges associated with this evolving technology.

  9. Fiber optical parametric amplifiers in optical communication systems

    DEFF Research Database (Denmark)

    Marhic, Michel E.; Andrekson, Peter A.; Petropoulos, Periklis

    2015-01-01

    The prospects for using fiber optical parametric amplifiers (OPAs) in optical communication systems are reviewed. Phase-insensitive amplifiers (PIAs) and phase-sensitive amplifiers (PSAs) are considered. Low-penalty amplification at/or near 1 Tb/s has been achieved, for both wavelength- and time-...... in excess of 14,000 Tb/s x km in realistic wavelength-division multiplexed long-haul networks. Technical challenges remaining to be addressed in order for fiber OPAs to become useful for long-haul communication networks are discussed.......The prospects for using fiber optical parametric amplifiers (OPAs) in optical communication systems are reviewed. Phase-insensitive amplifiers (PIAs) and phase-sensitive amplifiers (PSAs) are considered. Low-penalty amplification at/or near 1 Tb/s has been achieved, for both wavelength- and time......-modulated signals. A PSA with 1.1-dB noise figure has been demonstrated, and preliminary wavelength-division multiplexing experiments have been performed with PSAs. 512Gb/s have been transmitted over 6,000km by periodic phase conjugation. Simulations indicate that PIAs could reach data rate x reach products...

  10. Materials Development for Next Generation Optical Fiber

    Science.gov (United States)

    Ballato, John; Dragic, Peter

    2014-01-01

    Optical fibers, the enablers of the Internet, are being used in an ever more diverse array of applications. Many of the rapidly growing deployments of fibers are in high-power and, particularly, high power-per-unit-bandwidth systems where well-known optical nonlinearities have historically not been especially consequential in limiting overall performance. Today, however, nominally weak effects, most notably stimulated Brillouin scattering (SBS) and stimulated Raman scattering (SRS) are among the principal phenomena restricting continued scaling to higher optical power levels. In order to address these limitations, the optical fiber community has focused dominantly on geometry-related solutions such as large mode area (LMA) designs. Since such scattering, and all other linear and nonlinear optical phenomena including higher order mode instability (HOMI), are fundamentally materials-based in origin, this paper unapologetically advocates material solutions to present and future performance limitations. As such, this paper represents a ‘call to arms’ for material scientists and engineers to engage in this opportunity to drive the future development of optical fibers that address many of the grand engineering challenges of our day. PMID:28788683

  11. THE PRAGMATIC MEANINGS OF ADDRESS TERMS SAMPEYAN AND ANDA

    Directory of Open Access Journals (Sweden)

    Djoko Susanto

    2014-07-01

    Full Text Available Abstract: This research investigates the use of sampeyan and anda by the students from Pasuruan and Probolinggo. Address terms is one of important tools in communication in Javanese society as it is used, for example, to designate the person they are talking to or to show the possession of formal and informal manners. However, the use of this address terms may have different interpretation across regions. This research is undertaken to find out (1 factors that influence the choice of address terms sampeyan and anda in Pasuruan and Probolinggo and (2 situations in which the interlocutors use the address terms sampeyan and anda. Several theories are used to help analyze the data, which include address terms (Wardhaugh, 2002, sampeyan and anda (Wolf & Poedjosoedarmo, 1982, Politeness theory (Brown & Levinson, 1987, and Power and Solidarity (Brown & Gilman, 1960. The data were obtained from the results of observations, questionnaires and interviews with the participants. The results of the study show that both sampeyan and anda were found to be commonly used by the participants to address their lecturer, instead of using Bapak. This is, of course, uncommon from either the perspective of standard usage of Javanese or Indonesian language. This study also indicates that the participants used sampeyan to lecturer/teacher, kyai, parent, and older sibling because they wanted to express (1 express politeness and (2 to indicate informality. Concerning to the use of anda, this study reveals that the participants use this address term because of (1 more formal and appropriate manners in environmental education, (2 respecting person of higher social status and older person, (3 more polite and more appropriate than sampeyan, and (4 the use of Indonesian as a formal language. In some respect, however, the participants use anda to lecturer/teacher, which is not appropriate because they were not socially equal to the lecturer/teacher.  This study provide

  12. Address Points, address points, Published in 2009, 1:4800 (1in=400ft) scale, Woodson County.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Address Points dataset, published at 1:4800 (1in=400ft) scale, was produced all or in part from Published Reports/Deeds information as of 2009. It is described...

  13. Address Points, Lafayette Address Points, Published in 2007, 1:24000 (1in=2000ft) scale, Lafayette County Land Records.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Address Points dataset, published at 1:24000 (1in=2000ft) scale, was produced all or in part from Field Survey/GPS information as of 2007. It is described as...

  14. Address Points, Allegany County Address Points, Published in 2005, 1:1200 (1in=100ft) scale, Allegany County Government.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Address Points dataset, published at 1:1200 (1in=100ft) scale, was produced all or in part from Field Observation information as of 2005. It is described as...

  15. Fiber optics engineering

    CERN Document Server

    Azadeh, Mohammad

    2009-01-01

    Covering fiber optics from an engineering perspective, this text emphasizes data conversion between electrical and optical domains. Techniques to improve the fidelity of this conversion (from electrical to optical domain, and vice versa) are also covered.

  16. Coding for optical channels

    CERN Document Server

    Djordjevic, Ivan; Vasic, Bane

    2010-01-01

    This unique book provides a coherent and comprehensive introduction to the fundamentals of optical communications, signal processing and coding for optical channels. It is the first to integrate the fundamentals of coding theory and optical communication.

  17. Quantum optics for experimentalists

    CERN Document Server

    Ou, Zhe-Yu Jeff

    2017-01-01

    This book on quantum optics is from the point of view of an experimentalist. It approaches the theory of quantum optics with the language of optical modes of classical wave theory, with which experimentalists are most familiar.

  18. Selective addressing of high-rank atomic polarization moments

    CERN Document Server

    Yashchuk, V V; Gawlik, W; Kimball, D F; Malakyan, Y P; Rochester, S M; Malakyan, Yu. P.

    2003-01-01

    We describe a method of selective generation and study of polarization moments of up to the highest rank $\\kappa=2F$ possible for a quantum state with total angular momentum $F$. The technique is based on nonlinear magneto-optical rotation with frequency-modulated light. Various polarization moments are distinguished by the periodicity of light-polarization rotation induced by the atoms during Larmor precession and exhibit distinct light-intensity and frequency dependences. We apply the method to study polarization moments of $^{87}$Rb atoms contained in a vapor cell with antirelaxation coating. Distinct ultra-narrow (1-Hz wide) resonances, corresponding to different multipoles, appear in the magnetic-field dependence of the optical rotation. The use of the highest-multipole resonances has important applications in quantum and nonlinear optics and in magnetometry.

  19. Applied optics and optical design, part two

    CERN Document Server

    Conrady, A E

    2014-01-01

    Classic detailed treatment for practical designer. Fundamental concepts, systematic study and design of all types of optical systems. Reader can then design simpler optical systems without aid. Part Two of Two.

  20. Primary optic nerve sheath meningioma

    Energy Technology Data Exchange (ETDEWEB)

    Jeremic, Branislav [International Atomic Energy Agency, Vienna (Austria); Pitz, Susanne (eds.) [University Eye Hospital, Mainz (Germany)

    2008-07-01

    Optic nerve sheath meningioma (ONSM) is a rare tumour. Cases are usually separated into primary ONSM, which arises either intraorbitally or, less commonly, intracanalicularly, and secondary ONSM, which arises intracranially and subsequently invades the optic canal and orbit. This is the first book to cover all important aspects of the diagnosis and treatment of primary ONSM. After a general introduction, individual chapters discuss the clinical presentation, clinical examination and diagnosis, imaging, and histology. Treatment options are then addressed in detail, with special emphasis on external beam radiation therapy, and in particular stereotactic fractionated radiation therapy. The latter has recently produced consistently good results and is now considered the emerging treatment of choice for the vast majority of patients with primary ONSM. This well-illustrated book will prove invaluable to all practitioners who encounter primary ONSM in their clinical work. (orig.)

  1. Low concentrator PV optics optimization

    Science.gov (United States)

    Sharp, Leonard; Chang, Ben

    2008-08-01

    Purpose: Cost reduction is a major focus of the solar industry. Thin film technologies and concentration systems are viable ways to reducing cost, with unique strengths and weakness for both. Most of the concentrating PV work focuses on high concentration systems for reducing energy cost. Meanwhile, many believe that low concentrators provide significant cost reduction potential while addressing the mainstream PV market with a product that acts as a flat panel replacement. This paper analyzes the relative benefit of asymmetric vs. symmetric optics for low-concentrators in light of specific PV applications. Approach: Symmetric and asymmetric concentrating PV module performance is evaluated using computer simulation to determine potential value across various geographic locations and applications. The selected optic design is modeled against standard cSi flat panels and thin film to determine application fit, system level energy density and economic value. Results: While symmetric designs may seem ideal, asymmetric designs have an advantage in energy density. Both designs are assessed for aperture, optimum concentration ratio, and ideal system array configuration. Analysis of performance across climate specific effects (diffuse, direct and circumsolar) and location specific effects (sunpath) are also presented. The energy density and energy production of low concentrators provide a compelling value proposition. More significantly, the choice of optics for a low concentrating design can affect real world performance. With the goal of maximizing energy density and return on investment, this paper presents the advantages of asymmetric optic concentration and illustrates the value of this design within specific PV applications.

  2. Tunable laser optics

    CERN Document Server

    Duarte, FJ

    2015-01-01

    This Second Edition of a bestselling book describes the optics and optical principles needed to build lasers. It also highlights the optics instrumentation necessary to characterize laser emissions and focuses on laser-based optical instrumentation. The book emphasizes practical and utilitarian aspects of relevant optics including the essential theory. This revised, expanded, and improved edition contains new material on tunable lasers and discusses relevant topics in quantum optics.

  3. An address geocoding method for improving rural spatial information infrastructure

    Science.gov (United States)

    Pan, Yuchun; Chen, Baisong; Lu, Zhou; Li, Shuhua; Zhang, Jingbo; Zhou, YanBing

    2010-11-01

    The transition of rural and agricultural management from divisional to integrated mode has highlighted the importance of data integration and sharing. Current data are mostly collected by specific department to satisfy their own needs and lake of considering on wider potential uses. This led to great difference in data format, semantic, and precision even in same area, which is a significant barrier for constructing an integrated rural spatial information system to support integrated management and decision-making. Considering the rural cadastral management system and postal zones, the paper designs a rural address geocoding method based on rural cadastral parcel. It puts forward a geocoding standard which consists of absolute position code, relative position code and extended code. It designs a rural geocoding database model, and addresses collection and update model. Then, based on the rural address geocoding model, it proposed a data model for rural agricultural resources management. The results show that the address coding based on postal code is stable and easy to memorize, two-dimensional coding based on the direction and distance is easy to be located and memorized, while extended code can enhance the extensibility and flexibility of address geocoding.

  4. New generation of content addressable memories for associative processing

    Science.gov (United States)

    Lewis, H. G., Jr.; Giambalov, Paul

    2000-05-01

    Content addressable memories (CAMS) store both key and association data. A key is presented to the CAN when it is searched and all of the addresses are scanned in parallel to find the address referenced by the key. When a match occurs, the corresponding association is returned. With the explosion of telecommunications packet switching protocols, large data base servers, routers and search engines a new generation of dense sub-micron high throughput CAMS has been developed. The introduction of this paper presents a brief history and tutorial on CAMS, their many uses and advantages, and describes the architecture and functionality of several of MUSIC Semiconductors CAM devices. In subsequent sections of the paper we address using Associative Processing to accommodate the continued increase in sensor resolution, number of spectral bands, required coverage, the desire to implement real-time target cueing, and the data flow and image processing required for optimum performance of reconnaissance and surveillance Unmanned Aerial Vehicles (UAVs). To be competitive the system designer must provide the most computational power, per watt, per dollar, per cubic inch, within the boundaries of cost effective UAV environmental control systems. To address these problems we demonstrate leveraging DARPA and DoD funded Commercial Off-the-Shelf technology to integrate CAM based Associative Processing into a real-time heterogenous multiprocessing system for UAVs and other platforms with limited weight, volume and power budgets.

  5. An addressable cell array for a platform of biosensor chips

    Science.gov (United States)

    Yang, Seungkyoung; Choi, Soo-hee; Jung, Moon Youn; Song, Kibong; Park, Jeong Won

    2013-05-01

    In order to detect interested matters in fields, various lab-on-a-chips where chemical, physical, or biological sensors are loaded have been developed. eNOSE can be a representative example among them. Because animals can sense 300~1000 different chemicals by olfactory system - smell -, the olfactory system has been spotlighted as new materials in the field of sensing. Those investigations, however, are usually focused on how to detect signals from the olfactory neurons or receptors loaded on chips and enhance sensing efficacy of chips. Therefore, almost of those chips are designed for only one material sensing. Multi-sensing using multi-channels will be needed when the olfactory systems are adopted well on chips. For multiple sensing, we developed an addressable cell array. The chip has 38 cell-chambers arranged in a circle shape and different cell types of thirty eight can be allocated with specific addresses on the chip without any complex valve system. In order to confirm the cell addressing, we loaded EGFP-transfected and empty vector-transfected HEK293a cells into inlets of the cell array in a planned address and those cells were positioned into each chamber by brief aspiration. The arrayed cells were confirmed as a specific pattern through EGFP and nuclei staining. This cell array which can generate address of sensor materials like cells with their own specification is expected to be applied to a platform for a biosensor chip at various sensing fields.

  6. Intelligent Optics Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — The Intelligent Optics Laboratory supports sophisticated investigations on adaptive and nonlinear optics; advancedimaging and image processing; ground-to-ground and...

  7. Fibre-optic communications

    CERN Document Server

    Lecoy, Pierre

    2010-01-01

    This book describes in a comprehensive manner the components and systems of fiber optic communications and networks. The first section explains the theory of multimode and single-mode fibers, then the technological features, including manufacturing, cabling, and connecting. The second section describes the various components (passive and active optical components, integrated optics, opto-electronic transmitters and receivers, and optical amplifiers) used in fiber optic systems. Finally, the optical transmission system design is explained, and applications to optical networks and fiber optic se

  8. Optical Remote Sensing Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — The Optical Remote Sensing Laboratory deploys rugged, cutting-edge electro-optical instrumentation for the collection of various event signatures, with expertise in...

  9. Investigation of Optical Fibers for Nonlinear Optics.

    Science.gov (United States)

    1984-04-17

    Northwestern University, 1970. Experience Dr. Harrington has 13 years of research experi- ence in the area of optical properties of solids . Since joining...dynamics, and optical properties of solids . 34 34I ANTONIO C. PASTOR, Member of the Technical Staff, Optical Physics Department, Hughes Research

  10. Address Points, Point addresses represent site addresses issued by the Towns, Villages, and Cities in Manitowoc County. The points are used for emergency dispatching., Published in 2013, 1:2400 (1in=200ft) scale, Manitowoc County Government.

    Data.gov (United States)

    NSGIC Local Govt | GIS Inventory — Address Points dataset current as of 2013. Point addresses represent site addresses issued by the Towns, Villages, and Cities in Manitowoc County. The points are...

  11. Self-Powered Optical Spectroscopy

    Science.gov (United States)

    2015-08-27

    publications, 1 more in preparation, 1 archival conference paper, and 2 invention disclosures . 15. SUBJECT TERMS spectroscopy, nanoparticles, medical...name and address of the organization(s) financially responsible for and monitoring the work. 10. SPONSOR/MONITOR’S ACRONYM(S). Enter, if...analyzing  the  chemical  composition  of  many   materials :  the  interaction  of  optical  photons   with  the  underlying

  12. Firewall for Dynamic IP Address in Mobile IPv6

    Science.gov (United States)

    Qiu, Ying; Bao, Feng; Zhou, Jianying

    Mobile communication is becoming the mainstream with the rapid growth of mobile devices penetrating our daily life. More and more mobile devices such as mobile phones, personal digital assistants, notebooks etc, are capable of Internet access. Mobile devices frequently change their communication IP addresses in mobile IPv6 network following its current attached domain. This raises a big challenge for building firewall for mobile devices. The conventional firewalls are primarily based on IPv4 networks where the security criteria are specified only to the fixed IP addresses or subnets, which apparently do not apply to mobile IPv6. In this paper we propose three solutions for mobile IPv6 firewall. Our approaches make the firewall adaptive to dynamic IP addresses in mobile IPv6 network. They have different expense and weight corresponding to different degree of universality. The paper focuses the study more from practical aspect.

  13. Chemically Addressable Perovskite Nanocrystals for Light-Emitting Applications

    KAUST Repository

    Sun, Haizhu

    2017-07-10

    Whereas organic–inorganic hybrid perovskite nanocrystals (PNCs) have remarkable potential in the development of optoelectronic materials, their relatively poor chemical and colloidal stability undermines their performance in optoelectronic devices. Herein, this issue is addressed by passivating PNCs with a class of chemically addressable ligands. The robust ligands effectively protect the PNC surfaces, enhance PNC solution processability, and can be chemically addressed by thermally induced crosslinking or radical-induced polymerization. This thin polymer shield further enhances the photoluminescence quantum yields by removing surface trap states. Crosslinked methylammonium lead bromide (MAPbBr3) PNCs are applied as active materials to build light-emitting diodes that have low turn-on voltages and achieve a record luminance of over 7000 cd m−2, around threefold better than previous reported MA-based PNC devices. These results indicate the great potential of this ligand passivation approach for long lifespan, highly efficient PNC light emitters.

  14. Communication skills training to address disruptive physician behavior.

    Science.gov (United States)

    Saxton, Rebecca

    2012-05-01

    Disruptive behavior among health care providers has been linked to negative patient outcomes. High-stress areas, including the perioperative setting, are especially prone to this behavior. The purpose of this study was to develop, implement, and evaluate an educational communication skills intervention aimed at increasing the perceived self-efficacy of perioperative nurses to address disruptive physician behavior. Seventeen perioperative nurses participated in a two-day communication skills program presented by a certified Crucial Conversations trainer. By using paired t test analysis, I found that there was a statistically significant increase in total mean self-efficacy scores immediately after the intervention and four weeks after the intervention. In addition, four weeks after the intervention, participants reported the ability to address disruptive physician behavior 71% of the time. The results of this study suggest that one intervention strategy to address the serious threat of disruptive physician behavior to patient safety is to educate nurses in communication skills.

  15. Address switching: Reforming the architecture and traffic of Internet

    Institute of Scientific and Technical Information of China (English)

    LI Xing; BAO CongXiao

    2009-01-01

    The success of the Internet is largely ascribable to the packet-switching scheme, which, however, also presents major challenges. Having identified three missing links in the current Internet architecture based on our long-term experiences of designing and operating large-scale backbones, we put forward a new, but incrementally deployable, network scheme-address switching. The address switching has both the advantages of packet switching and circuit switching; it supplies the missing links in the current Internet architecture and can reform the Internet traffic. Our analysis, protocol design and experiments indicate that the address switching can greatly improve the quality of service (QoS), security and routing scalability of today's Internet. So it can provide flexible, high-performance and "per-service" networking for the scientific research communities. Moreover, it can provide a fairer and more sustainable business model for the commodity Internet.

  16. No Address Space Operating System Prototype and Its Performance Test

    Institute of Scientific and Technical Information of China (English)

    LIU Fuyan; YOU Jinyuan

    2001-01-01

    In this paper,we first analyze datastorage models in typical operating systems,the re-lation between distributed shared memory and datastorage model,as well as the relation between mem-ory hierarchy and data storage model.Then we pro-pose the concept of No Address Space Operating Sys-tem,discuss an implementation prototype,and ana-lyze its performance and advantages.We believe thatthe concept of process virtual address space should beabandoned in operating systems,instructions shouldaccess files directly,and processes should run on files.Compared with other operating systems,No AddressSpace Operating System has many advantages andshould be adopted in computer systems.

  17. Engineering multiphoton states for linear optics computation

    CERN Document Server

    Aniello, P; Napolitano, M; Paris, M G A; Aniello, Paolo; Lupo, Cosmo; Napolitano, Mario; Paris, Matteo G.A.

    2006-01-01

    Transformations achievable by linear optical components allow to generate the whole unitary group only when restricted to the one-photon subspace of a multimode Fock space. In this paper, we address the more general problem of encoding quantum information by multiphoton states, and elaborating it via ancillary extensions, linear optical passive devices and photodetection. Our scheme stems in a natural way from the mathematical structures underlying the physics of linear optical passive devices. In particular, we analyze an economical procedure for mapping a fiducial 2-photon 2-mode state into an arbitrary 2-photon 2-mode state using ancillary resources and linear optical passive N-ports assisted by post-selection. We found that adding a single ancilla mode is enough to generate any desired target state. The effect of imperfect photodetection in post-selection is considered and a simple trade-off between success probability and fidelity is derived.

  18. Improving metrology for micro-optics manufacturing

    Science.gov (United States)

    Davies, Angela D.; Bergner, Brent C.; Gardner, Neil W.

    2003-11-01

    Metrology is one of the critical enabling technologies for realizing the full market potential for micro-optical systems. Measurement capabilities are currently far behind present and future needs. Much of today"s test equipment was developed for the micro-electronics industry and is not optimized for micro-optic materials and geometries. Metrology capabilities currently limit the components that can be realized, in many cases. Improved testing will be come increasingly important as the technology moves to integration where it will become important to "test early and test often" to achieve high yields. In this paper, we focus on micro-refractive components in particular, and describe measurement challenges for this class of components and current and future needs. We also describe a new micro-optics metrology research program at UNC Charlotte under the Center for Precision Metrology and the new Center for Optoelectronics and Optical Communications to address these needs.

  19. Optimization in spectrum-sliced optical networks

    Science.gov (United States)

    Day Rosario Assis, Karcius; Ferreira dos Santos, Alex; Almeida, Raul C.

    2013-12-01

    Current communication in optical networks presents a wide range of granularities, making it hard to use the optical spectrum efficiently under the WDM framework. In Spectrum Sliced Optical Networks, the WDM rigid frequency grid is replaced by a more flexible structure, in which the spectrum is organized in frequency slots, and each traffic flow is assigned to an appropriate set of contiguous slots. The classical Routing and Wavelength Assignment (RWA) problem is then replaced by a Routing and Spectrum assignment (RSA) problem. This paper addresses an iterativa approach to balance the network load during the routing decision in Spectrum-Elastic Optical Path Networks. We have built numerical examples to illustrate the performance of our routing approach. Comparisons to other routing techniques show that our approach mitigates the lightpath requests blocking probability.

  20. The current trends of optics and photonics

    CERN Document Server

    2015-01-01

    Optics and photonics offer new and vibrant approaches to meeting the challenges of the 21st century concerning energy conservation, education, agriculture, personal health and the environment. One of the most effective ways to address these global problems is to provide updated and reliable content on light-based technologies. Optical thin films and meta-materials, lasers, optical communications, light-emitting diodes, solar cells, liquid crystal technology, nanophotonics and biophotonics all play vital roles in enriching our lives. We hope to raise readers’ awareness of how optical technologies are now promoting sustainable development and providing reliable solutions to basic human needs. Furthermore, in order to broaden new research fields, we hope to inspire them to pursue further cutting-edge breakthroughs on the basis of the accomplishments that have already been made.

  1. Illusion optics

    Science.gov (United States)

    Lai, Yun; Ng, Jack; Chen, Huan-Yang; Zhang, Zhao-Qing; Chan, C. T.

    2010-09-01

    The technique of “transformation optics” establishes a correspondence between coordinate transformation and material constitutive parameters. Most of the transformation optics mappings give metamaterials that have graded positive refractive indices that can steer light in curves defined by the coordinate transformation. We will focus on those “folded-geometry mappings” that give negative refractive index materials that have special wave scattering properties. One interesting example is a kind of remote illusion device that can transform the stereoscopic image of an object into the illusion of some other object of our choice. The conceptual device can create the illusion without touching or encircling the object. For any incident wave, the device transforms the scattered waves of the original object into that of the object chosen for illusion outside a virtual boundary. We will illustrate some possible applications of this type of metamaterial remote device, including “cloaking at a distance,” partial cloaking, cloaking from an embedded device, revealing a hidden object inside a container, turning the image of one object into that of another object, and seeing through a wall. The feasibility of building this remote illusion device by metamaterials will also be discussed.

  2. Addressing resistance to antibiotics in systematic reviews of antibiotic interventions

    DEFF Research Database (Denmark)

    Leibovici, Leonard; Paul, Mical; Garner, Paul

    2016-01-01

    Antibiotics are among the most important interventions in healthcare. Resistance of bacteria to antibiotics threatens the effectiveness of treatment. Systematic reviews of antibiotic treatments often do not address resistance to antibiotics even when data are available in the original studies....... This omission creates a skewed view, which emphasizes short-term efficacy and ignores the long-term consequences to the patient and other people. We offer a framework for addressing antibiotic resistance in systematic reviews. We suggest that the data on background resistance in the original trials should...... controlled trials or systematic reviews....

  3. A Novel Smart Meter Controlling System with Dynamic IP Addresses

    DEFF Research Database (Denmark)

    Manembu, Pinrolinvic; Welang, Brammy; Kalua Lapu, Aditya

    2017-01-01

    Smart meters are the electronic devices for measuring energy consumption in real time. Usually, static public IP addresses are allocated to realize the point-to-point (P2P) communication and remote controlling for smart metering systems. This, however, restricts the wide deployment of smart meters......, due to the deficiency of public IP resources. This paper proposes a novel subscription-based communication architecture for the support of dynamic IP addresses and group controlling of smart meters. The paper evaluates the proposed architecture by comparing the traditional P2P architecture......, and validate its effectiveness to interact with smart meters....

  4. Neurochip Based on Light-addressable Potentiometric Sensor

    Institute of Scientific and Technical Information of China (English)

    Qingjun Liu; Hua Cai; Ying Xu; Lifeng Qin; Lijiang Wang; Ping Wang

    2006-01-01

    A novel neurochip based on light addressable potentiometric sensor (LAPS) is designed. Using its light addressable characteristic. The problems of the limitations of restricted discrete active sites of current neurochips, such as microelectrode array and field effect transistor array can be settled easily. Based on the theoretical analysis of the interface between cells and LAPS, spontaneously discharges of hippocampal neurons induced by Mg2+-free media treatment were recorded by LAPS. The results demonstrate that this kind of neurochip has potential to monitor electrophysiology of cultured cells in a non-invasive way.

  5. Address Counter Generators for Low Power Memory BIST

    OpenAIRE

    Balwinder Singh; Sukhleen Bindra Narang; Arun Khosla

    2011-01-01

    In today's Integrated Circuits (IC's) designs Built-in Self Test (BIST) is becoming important for the memory which is the most necessary part of the System on Chip. The March algorithm has been widely used to test memory core of System on chip (SOC). LFSRs and counters are mainly used to generate the memory addresses, which can be serially applied to the memory cores under test. In this paper Address counters and Data generators (i.e. parts of the MBIST) are designed. These implemented in Har...

  6. Big data, little security: Addressing security issues in your platform

    Science.gov (United States)

    Macklin, Thomas; Mathews, Joseph

    2017-05-01

    This paper describes some patterns for information security problems that consistently emerge among traditional enterprise networks and applications, both with respect to cyber threats and data sensitivity. We draw upon cases from qualitative studies and interviews of system developers, network operators, and certifiers of military applications. Specifically, the problems discussed involve sensitivity of data aggregates, training efficacy, and security decision support in the human machine interface. While proven techniques can address many enterprise security challenges, we provide additional recommendations on how to further improve overall security posture, and suggest additional research thrusts to address areas where known gaps remain.

  7. Residualization is not the answer: Rethinking how to address multicollinearity.

    Science.gov (United States)

    York, Richard

    2012-11-01

    Here I show that a commonly used procedure to address problems stemming from collinearity and multicollinearity among independent variables in regression analysis, "residualization", leads to biased coefficient and standard error estimates and does not address the fundamental problem of collinearity, which is a lack of information. I demonstrate this using visual representations of collinearity, hypothetical experimental designs, and analyses of both artificial and real world data. I conclude by noting the importance of examining methodological practices to ensure that their validity can be established based on rational criteria.

  8. Light Optics for Optical Stochastic Cooling

    Energy Technology Data Exchange (ETDEWEB)

    Andorf, Matthew [NICADD, DeKalb; Lebedev, Valeri [Fermilab; Piot, Philippe [NICADD, DeKalb; Ruan, Jinhao [Fermilab

    2016-06-01

    In Optical Stochastic Cooling (OSC) radiation generated by a particle in a "pickup" undulator is amplified and transported to a downstream "kicker" undulator where it interacts with the same particle which radiated it. Fermilab plans to carry out both passive (no optical amplifier) and active (optical amplifier) tests of OSC at the Integrable Optics Test Accelerator (IOTA) currently in construction*. The performace of the optical system is analyzed with simulations in Synchrotron Radiation Workshop (SRW) accounting for the specific temporal and spectral properties of undulator radiation and being augmented to include dispersion of lens material.

  9. Durable innovative solar optical materials: the international challenge

    Energy Technology Data Exchange (ETDEWEB)

    Lampert, C.M.

    1982-01-01

    A variety of optical coatings are discussed in the context of solar energy utilization. Well known coatings such as heat mirrors, selective absorbers, and reflective films are covered briefly. Emphasis is placed on the materials limitations and design choices for various lesser known optical coatings and materials. Physical and optical properties are detailed for protective antireflection films, fluorescent concentrator materials, holographic films, cold mirrors, radiative cooling surfaces, and optical switching films including electrochromic, thermochromic, photochromic, and liquid crystal types. For many of these materials research is only now being considered, and various design and durability issues must be addressed.

  10. Applied optics fundamentals and device applications nano, MOEMS, and biotechnology

    CERN Document Server

    Mentzer, Mark

    2011-01-01

    How does the field of optical engineering impact biotechnology? Perhaps for the first time, Applied Optics Fundamentals and Device Applications: Nano, MOEMS, and Biotechnology answers that question directly by integrating coverage of the many disciplines and applications involved in optical engineering, and then examining their applications in nanobiotechnology. Written by a senior U.S. Army research scientist and pioneer in the field of optical engineering, this book addresses the exponential growth in materials, applications, and cross-functional relevance of the many convergent disciplines

  11. Durable innovative solar optical materials - the international challenge

    Science.gov (United States)

    Lampert, Carl M.

    1982-04-01

    A variety of optical coatings are discussed in the context of solar energy utilization. Well known coatings such as heat mirrors, selective absorbers, and reflective films are covered briefly. Emphasis is placed on the materials limitations and design choices for various lesser known optical coatings and materials. Physical and optical properties are detailed for protective antireflection films, fluorescent concentrator materials, holographic films, cold mirrors, radiative cooling surfaces, and optical switching films including electrochromic, thermochromic, photochromic, and liquid crystal types. For many of these materials research is only now being considered, and various design and durability issues must be addressed.

  12. Durable innovative solar optical materials: The international challenge

    Science.gov (United States)

    Lampert, C. M.

    1982-07-01

    A variety of optical coatings is discussed in the context of solar energy utilization. Well known coatings such as heat mirrors, selective absorbers, and reflective films are covered briefly. Emphasis is placed on the materials limitations and design choices for various lesser known optical coatings and materials. Physical and optical properties are detailed for protective antireflection films, fluorescent concentrator materials, holographic films, cold mirrors, radiative cooling surfaces, and optical switching films including electrochromic, thermochromic, photochromic, and liquid crystal types. For many of these materials research is only now being considered, and various design and durability issues must be addressed.

  13. 10 CFR 590.104 - Address for filing documents.

    Science.gov (United States)

    2010-01-01

    ..., Fossil Energy, U.S. Department of Energy, Docket Room 3F-056, FE-50, Forrestal Building, 1000... 10 Energy 4 2010-01-01 2010-01-01 false Address for filing documents. 590.104 Section 590.104 Energy DEPARTMENT OF ENERGY (CONTINUED) NATURAL GAS (ECONOMIC REGULATORY ADMINISTRATION)...

  14. How Teacher Educators Can Address Our Nation's Financial Crisis

    Science.gov (United States)

    Dowdell, John; McElfresh, Dwight; Sikula, John

    2009-01-01

    This article from Ashland University reports on what one university, well known for its Teacher Education programs, is doing in an economically depressed state to address our country's financial crisis. Ohio has mandated that financial literacy be taught in high schools by 2010. Reported herein is what is being done to prepare teachers for this…

  15. Addressing Nicotine Dependence in Psychodynamic Psychotherapy: Perspectives from Residency Training

    Science.gov (United States)

    Prochaska, Judith J.; Fromont, Sebastien C.; Banys, Peter; Eisendrath, Stuart J.; Horowitz, Mardi J.; Jacobs, Marc H.; Hall, Sharon M.

    2007-01-01

    Objective: According to APA treatment recommendations, psychiatrists should assess and intervene in tobacco use with all of their patients who smoke. The ease with which this occurs may vary by treatment model. This study examined perspectives in residency training to identify a framework for addressing nicotine dependence within psychodynamic…

  16. Understanding and Addressing Homophobia in Schools: A View from Teachers

    Science.gov (United States)

    Bhana, Deevia

    2012-01-01

    South African schools have been found to be homophobic. Teachers can play an important role in offering a critique of homophobia grounded in South Africa's legal claim to equality on the basis of sexual orientation. Currently there is a dearth of educational research about how teachers understand and address homophobia. By drawing upon focus-group…

  17. Utilizing Motivational Interviewing to Address Resistant Behaviors in Clinical Supervision

    Science.gov (United States)

    Wahesh, Edward

    2016-01-01

    Motivational interviewing is presented as an approach to address resistant behaviors in clinical supervision. A case example is used to illustrate the process in which the relational and technical elements of motivational interviewing can be applied to supervisee resistance. Implications for supervisors and researchers are discussed.

  18. Preparing Science Teachers to Address Contentious and Sensitive Science Topics

    Science.gov (United States)

    Ado, Gustave

    2015-01-01

    Purpose: Despite high HIV prevalence rates in Ivory Coast, the formal K-12 curriculum was not developed to address HIV/AIDS information completely for many African students. The purpose of this study was to identify factors that influenced Ivorian teachers' teaching of the HIV/AIDS curriculum in middle school science curricula in nine middle…

  19. Bullying in Schools: Addressing Desires, Not Only Behaviours

    Science.gov (United States)

    Rigby, Ken

    2012-01-01

    Currently the main approach in responding to bullying in schools is to focus on undesired behaviours and to apply sanctions. This approach is often ineffective as well as failing to address the needs of children as persons as distinct from the behaviour they produce. A proposed alternative approach is to inquire into the motivation of children who…

  20. Address by the Minister of Foreign Affairs of Lithuania

    Directory of Open Access Journals (Sweden)

    Audronius Azubalis

    2010-08-01

    Full Text Available Address by the Minister of Foreign Affairs of Lithuania Audronius Azubalis to the participants of the First International Conference on Nordic and Baltic Studies in Romania:Romania and Lithuania in the Interwar International Relations: Bonds, Intersections and Encounters hosted by the Romanian Association for Baltic and Nordic Studies, Târgoviste, May 19-21, 2010.

  1. Ronald Reagan's "Star Wars" Address: Mythic Containment of Technical Reasoning.

    Science.gov (United States)

    Rushing, Janice Hocker

    1986-01-01

    Views Reagan's "Star Wars" address as part of the culturally evolving myth of the New Frontier. Discusses how the speech creates the illusion of both preserving and transcending science by (1) subordinating technical reasoning to prevent nuclear holocaust and (2) using technoscience to rescript history and remove temporal and spacial…

  2. Responsibility for radical change in addressing climate change

    NARCIS (Netherlands)

    Bouvrie, des N.; Karlsson-Vinkhuyzen, S.I.S.E.; Jollands, N.

    2014-01-01

    To radically address the problem of climate change, it is not enough to modify specific attitudes and behaviors while upholding the present paradigms. This article aims to show why modifications will never bring about radical carbon emission reductions. We discuss what it implies to desire radical c

  3. Sociocultural Determinants of Symmetrical and Asymetrical Address Forms in Spanish.

    Science.gov (United States)

    Sole, Yolanda Russinovich

    The most basic and simplest act of communicative competence in Spanish involves the appropriate decoding and selection of the pronominal address forms "tu" and "Usted." Their selection and semantic value are not, however, determined by linguistic criteria alone. Since "tu/Ud." mark the relative status of each speaker in a given context, their…

  4. Secondary Data Analysis: An Important Tool for Addressing Developmental Questions

    Science.gov (United States)

    Greenhoot, Andrea Follmer; Dowsett, Chantelle J.

    2012-01-01

    Existing data sets can be an efficient, powerful, and readily available resource for addressing questions about developmental science. Many of the available databases contain hundreds of variables of interest to developmental psychologists, track participants longitudinally, and have representative samples. In this article, the authors discuss the…

  5. A Breath of Fresh Air: Addressing Indoor Air Quality

    Science.gov (United States)

    Palliser, Janna

    2011-01-01

    Indoor air pollution refers to "chemical, biological, and physical contamination of indoor air," which may result in adverse health effects (OECD 2003). The causes, sources, and types of indoor air pollutants will be addressed in this article, as well as health effects and how to reduce exposure. Learning more about potential pollutants in home…

  6. Effective Organizational Structures and Processes: Addressing Issues of Change

    Science.gov (United States)

    Andrade, Maureen Snow

    2016-01-01

    This chapter describes organizational structures and processes at the institutional and project levels for the development and support of distance learning initiatives. It addresses environmental and stakeholder issues and explores principles and strategies of effective leadership for change creation and management.

  7. Promoting Interdisciplinary Collaboration: Trainees Addressing Siloed Medical Education

    Science.gov (United States)

    Kitts, Robert Li; Christodoulou, Joanna; Goldman, Stuart

    2011-01-01

    Objective: Professional siloing within medical institutions has been identified as a problem in medical education, including resident training. The authors discuss how trainees from different disciplines can collaborate to address this problem. Method: A group of trainees from psychiatry, developmental medicine, neurology, and education came…

  8. State Legislation to Address Childhood Obesity. Program Results Brief

    Science.gov (United States)

    Fiester, Leila

    2012-01-01

    An estimated 12.5 million American children and teens are obese. Over time, the diseases and disabilities associated with obesity may undermine this population's health and result in substantial social and economic costs. Policies that address children's nutrition and physical activity are an important tool in reversing the obesity epidemic. More…

  9. A Breath of Fresh Air: Addressing Indoor Air Quality

    Science.gov (United States)

    Palliser, Janna

    2011-01-01

    Indoor air pollution refers to "chemical, biological, and physical contamination of indoor air," which may result in adverse health effects (OECD 2003). The causes, sources, and types of indoor air pollutants will be addressed in this article, as well as health effects and how to reduce exposure. Learning more about potential pollutants in home…

  10. Addressing the Causes of Chef Shortages in the UK

    Science.gov (United States)

    Pratten, John; O'Leary, Barbara

    2007-01-01

    Purpose: To outline the reasons for staff shortages in the UK catering industry and then to decide if further training could help to address these issues. Design/methodology/approach: The objectives have been achieved by examining the training provisions at a college, and then asking the students, their training staff, employers and employees…

  11. Addressing the Needs of Students with Rett Syndrome.

    Science.gov (United States)

    Katsiyannis, Antonis; Ellenburg, Jennifer S.; Acton, Olivia M.; Torrey, Gregory

    2001-01-01

    This article discusses symptoms of students with Rett Syndrome, a disability in females characterized by the development of multiple specific deficits following a period of normal functioning after birth. Specific interventions for students with Rett syndrome are provided and address communication, stereotypic movements, self-injurious behaviors,…

  12. 27 CFR 19.645 - Name and address of bottler.

    Science.gov (United States)

    2010-04-01

    ... addresses) of the distiller; (b) Where “straight whiskies” of the same type which have been produced in the... warehouseman's bonded premises for further storage) and subsequently bottled and labeled as “straight whisky,” such “straight whisky” shall be labeled in accordance with the requirements of the first paragraph...

  13. "The First Year, They Cried": How Teachers Address Test Stress

    Science.gov (United States)

    Childs, Ruth A.

    2009-01-01

    Grade 3 teachers in Ontario must administer the Primary Assessment of Reading, Writing and Mathematics to their students. In this study, we analyze how four teachers framed and addressed the problem of the stress some of their students experienced when sitting the test. The teachers framed the problem in different ways: as related to students'…

  14. Need to Address Evidence-Based Practice in Educational Administration

    Science.gov (United States)

    Kowalski, Theodore

    2009-01-01

    Purpose: This article presents a case for addressing evidence-based practice (EBP) in educational administration. Content is arranged around four objectives: (a) summarizing the status of educational administration as a profession, (b) defining evidence and the model, (c) explaining EBP's social and professional merit, and (d) identifying barriers…

  15. Organizing for Flexibility: Addressing Dynamic Capabilities and Organization Design

    OpenAIRE

    Weerdt, Niels; Volberda, Henk; Verwaal, Ernst; Stienstra, Marten

    2014-01-01

    The increasingly dynamic nature of organizational environments has led the research community to study organizational flexibility. Although the research literature stresses the complexity of the organizational flexibility construct, it lacks a comprehensive empirical study addressing the relationships among various dimensions of organizational flexibility. This chapter develops a theoretical framework specifying the linkages between types of flexibility and organization design characteristics...

  16. Multicultural Training Intervention to Address American Indian Stereotypes

    Science.gov (United States)

    Steinfeldt, Jesse A.; Steinfeldt, Matthew Clint

    2012-01-01

    This article describes a multicultural training intervention that addresses American Indian stereotypes perpetuated through the use of American Indians and corresponding imagery as mascots by schools and athletic teams. With the Association for Multicultural Counseling and Development's tripartite model of multicultural competence (awareness,…

  17. How Rhetorical Theories of Genre Address Common Core Writing Standards

    Science.gov (United States)

    Collin, Ross

    2013-01-01

    This article begins with a review of the forms of writing promoted in the Common Core State Standards. Across content areas, Common Core encourages teachers to attune students' writing to rhetorical concerns of audience, purpose, task, and disciplinary thinking. To address these concerns, teachers might take a rhetorical approach to the study…

  18. Addressing resistance to antibiotics in systematic reviews of antibiotic interventions

    NARCIS (Netherlands)

    Leibovici, Leonard; Paul, Mical; Garner, Paul; Sinclair, David J; Afshari, Arash; Pace, Nathan Leon; Cullum, Nicky; Williams, Hywel C; Smyth, Alan; Skoetz, Nicole; Del Mar, Chris; Schilder, Anne G M; Yahav, Dafna; Tovey, David

    2016-01-01

    Antibiotics are among the most important interventions in healthcare. Resistance of bacteria to antibiotics threatens the effectiveness of treatment. Systematic reviews of antibiotic treatments often do not address resistance to antibiotics even when data are available in the original studies. This

  19. The non addressed mail; Le courrier non adresse

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    In 1999, the non addressed mail aggregated i million tons. Today there is no selective collection of these wastes. The ADEME (french agency for the environment and the energy mastership) drove a study to propose and evaluate the cost of a selective collection. This document presents the results of the study. (A.L.B.)

  20. Addressing the Need for Management Processes for Higher Education Accreditation.

    Science.gov (United States)

    Brennan, Linda L.; Austin, Walter W.

    2003-01-01

    The accreditation standards of the Association to Advance Collegiate Schools of Business (AACSB International) ask business schools to describe consistent processes that provide for operational consistency and continuous improvement in support of the schools' stated missions. This article addresses the identification of requisite quality…

  1. Addressing the Multi-scale lapsus of landscape

    NARCIS (Netherlands)

    Schoorl, J.M.

    2002-01-01

    "Addressing the Multi-scale Lapsus of Landscape" with the sub-title "Multi-scale landscape process modelling to support sustainable land use: A case study for the Lower Guadalhorce valley South Spain" focuses on the role of landscape as the main driving factor behind many geo-environm

  2. Addressing Common Student Errors with Classroom Voting in Multivariable Calculus

    Science.gov (United States)

    Cline, Kelly; Parker, Mark; Zullo, Holly; Stewart, Ann

    2012-01-01

    One technique for identifying and addressing common student errors is the method of classroom voting, in which the instructor presents a multiple-choice question to the class, and after a few minutes for consideration and small group discussion, each student votes on the correct answer, often using a hand-held electronic clicker. If a large number…

  3. The Democratic Imperative to Address Sexual Equality Rights in Schools

    Science.gov (United States)

    Gereluk, Dianne

    2013-01-01

    Issues of sexual orientation elicit ethical debates in schools and society. In jurisdictions where a legal right has not yet been established, one argument commonly rests on whether schools ought to address issues of same-sex relationships and marriage on the basis of civil equality, or whether such controversial issues ought to remain in the…

  4. On Discrimination in Chinese and English Indirect Addressings

    Science.gov (United States)

    Yao, Lianbing

    2013-01-01

    One of the fundamental usages of language is to address each other. As a socialized product, language is bound to transfer its users' intention, the examination of which will have to be based on the absence of either the addressor or the addressee, or even the both. In the process of social development, there exists discrimination between…

  5. Addressing Patient Sexual Orientation in the Undergraduate Medical Education Curriculum

    Science.gov (United States)

    Tamas, Rebecca L.; Miller, Karen Hughes; Martin, Leslee J.; Greenberg, Ruth B.

    2010-01-01

    Objective: This study aims to estimate the number of hours dedicated to lesbian, gay, bisexual, and transgender content in one medical school's undergraduate curriculum, compare it to the national average, and identify barriers to addressing this content. Methods: Course and clerkship directors were asked to estimate how many hours they spent on…

  6. Actions States and Communities Can Take to Address Cognitive Health

    Centers for Disease Control (CDC) Podcasts

    2014-06-09

    In this podcast, CDC’s Dr. Lynda Anderson highlights the important roles that states and communities can play in addressing cognitive health as part of overall health.  Created: 6/9/2014 by National Center for Chronic Disease Prevention and Health Promotion (NCCDPHP).   Date Released: 6/9/2014.

  7. Beyond Values Clarification: Addressing Client Values in Clinical Behavior Analysis

    Science.gov (United States)

    Bonow, Jordan T.; Follette, William C.

    2009-01-01

    Ethical principles of psychology, as exemplified in the American Psychological Association (APA) Code of Ethics (2002), provide impractical advice for addressing client values during psychotherapy. These principles seem to argue that each client's values should be respected and protected at all times, except in cases in which this would result in…

  8. Addressing Nature Deficit Disorder through Primitive Camping Experiences

    Science.gov (United States)

    Allen, Kevin; Varner, Keegan; Sallee, Jeff

    2011-01-01

    Today's youth suffer from Nature Deficit Disorder, a condition that has been connected to ADHD, shortage of creativity, and general lack of knowledge about the outdoors. A team of educators and specialists are addressing this issue with primitive camping. County educators were trained using experiential learning and train-the-trainer techniques.…

  9. Helping Parents Address Their Child's Sexual Behavior Problems.

    Science.gov (United States)

    Heiman, Marsha

    2001-01-01

    Describes a model for helping parents address their child's sexually inappropriate behavior. The model focuses on: supporting parents and facilitating their ability to accept their child's sexual problems, processing their affective and cognitive reactions, and devising a plan to help parents talk directly with their child about the sexually…

  10. Intercultural Identities: Addressing the Global Dimension through Art Education

    Science.gov (United States)

    Bianchi, June

    2011-01-01

    Recent educational policy and practice have established an extended role for all subjects in addressing children and young peoples' academic and interpersonal development, with strategies facilitating key skills and wider learning across areas of Citizenship and Personal, Social and Health education providing an integrated approach to education…

  11. Are Teacher and Principal Candidates Prepared to Address Student Cyberbullying?

    Science.gov (United States)

    Styron, Ronald A., Jr.; Bonner, Jessica L.; Styron, Jennifer L.; Bridgeforth, James; Martin, Cecelia

    2016-01-01

    The purpose of this study was to examine the preparation of teacher and principal candidates to address problems created in K-12 settings as a result of cyberbullying. Participants included teacher and principal preparation students. Findings indicated that respondents were familiar with the most common forms of cyberbullying and its impact on…

  12. 40 CFR 150.17 - Addresses for applications and correspondence.

    Science.gov (United States)

    2010-07-01

    ..., Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington DC 20460-0001. (b) Hand/courier... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Addresses for applications and correspondence. 150.17 Section 150.17 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY...

  13. Forms of Address as Cross-Cultural Code-Switching

    DEFF Research Database (Denmark)

    Ørsnes, Bjarne

    2016-01-01

    Both German and Danish have distinct pronouns for addressing communication partners formallyand informally (referred to as V for Sie/De and T for du/du). However, their use differsconsiderably in Germany and Denmark, e. g. in higher education. In Germany, the lecturerand the students use V...

  14. Methods That Matter in Addressing Cultural Diversity with Teacher Candidates

    Science.gov (United States)

    Acquah, Emmanuel O.; Commins, Nancy L.

    2017-01-01

    Drawing on a combination of prior experience, theoretical stance, and intuition, along with pedagogical practices identified to be effective in addressing diversity with teacher candidates, a model for teaching multicultural education to teacher candidates was designed. This study examined how particular elements of this model were effective in…

  15. APOLLO SOYUZ TEST PROJECT [ASTP] CREWS ADDRESS PERSONNEL IN LCC

    Science.gov (United States)

    1975-01-01

    The Soviet and American crews for the July Apollo Soyuz Test Project [standing, center] addressed personnel assembled in a firing room at KSC on February 10. The crews for the joint manned space mission toured the Center during their three-day visit which also included inspection of ASTP equipment and facilities and a trip to Disney World.

  16. Addressing Anger Using Sensorimotor Psychotherapy and Cognitive Behaviour Therapy

    Science.gov (United States)

    Flynn, Sarah M.

    2010-01-01

    A young woman initiated counselling services at a community agency to address her explosive anger that was a remnant of childhood physical and emotional abuse. Sensorimotor psychotherapy was used to help this client learn how to monitor and regulate her sensorimotor processes. In conjunction with this approach, Cognitive behavioural therapy was…

  17. Teaching Digital Natives: Promoting Information Literacy and Addressing Instructional Challenges

    Science.gov (United States)

    Neumann, Crystal

    2016-01-01

    Technology must be used as a teaching and learning tool to help students succeed. However, educators must be proactive in identifying some of the pitfalls of technology, such as information illiteracy. The phenomenological study covers how English instructors from Indianapolis, who teach first year students, address information literacy and the…

  18. Evaluating Self-Addressing Protocols for Ad-Hoc Networks

    NARCIS (Netherlands)

    Schmidt, Ricardo de O.; Pras, Aiko; Gomes, Reinaldo

    2011-01-01

    Ad-hoc networks are supposed to operate autonomously and, therefore, self-* technologies are fundamental to their deployment. Many of these so- lutions have been proposed during the last few years, covering several layers and functionalities of network- ing systems. Addressing can be considered as o

  19. Addressing Common Student Errors with Classroom Voting in Multivariable Calculus

    Science.gov (United States)

    Cline, Kelly; Parker, Mark; Zullo, Holly; Stewart, Ann

    2012-01-01

    One technique for identifying and addressing common student errors is the method of classroom voting, in which the instructor presents a multiple-choice question to the class, and after a few minutes for consideration and small group discussion, each student votes on the correct answer, often using a hand-held electronic clicker. If a large number…

  20. 32 CFR Appendix B to Part 516 - Mailing Addresses

    Science.gov (United States)

    2010-07-01

    ... addresses: COMMANDER (JACS-Z), U.S. ARMY CLAIMS SERVICE, OTJAG, BUILDING 4411, ROOM 206, LLEWELLYN AVENUE, FORT GEORGE G. MEADE, MD 20755-5360 (1) PERSONNEL CLAIMS AND RECOVERY DIVISION (JACS-PC), U.S. ARMY...) TORT CLAIMS DIVISION (JACS-TC), U.S. ARMY CLAIMS SERVICE, OTJAG, BUILDING 4411, ROOM 206,...