WorldWideScience

Sample records for optical radar

  1. All-optical bandwidth-tailorable radar

    CERN Document Server

    Zou, Weiwen; Long, Xin; Zhang, Siteng; Cui, Yuanjun; Chen, Jianping

    2015-01-01

    Radar has been widely used in military, security, and rescue. Metamaterial cloak is employed in stealth targets to evade radar detection. Hence modern radar should be reconfigurable at multi-bands for detecting stealth targets, which might be realized based on microwave photonics. Here, we demonstrate an all-optical bandwidth-tailorable radar architecture. It is a coherent system utilizing one mode-locked laser for both signal generation and reception. Heterodyning of two individually filtered optical pulses that are pre-chirped via wavelength-to-time mapping generates wideband linearly-chirped radar signal. The working bands can be flexibly tailored with desired bandwidth at user-preferred carrier frequency. After modulated onto the pre-chirped optical pulse, radar echoes are time-stretched and frequency-compressed by several times. The digitization becomes much easier without loss of detection ability. We believe that the demonstration can innovate the radar's architecture with ultra-high range resolution.

  2. Optical display for radar sensing

    Science.gov (United States)

    Szu, Harold; Hsu, Charles; Willey, Jefferson; Landa, Joseph; Hsieh, Minder; Larsen, Louis V.; Krzywicki, Alan T.; Tran, Binh Q.; Hoekstra, Philip; Dillard, John T.; Krapels, Keith A.; Wardlaw, Michael; Chu, Kai-Dee

    2015-05-01

    Boltzmann headstone S = kB Log W turns out to be the Rosette stone for Greek physics translation optical display of the microwave sensing hieroglyphics. The LHS is the molecular entropy S measuring the degree of uniformity scattering off the sensing cross sections. The RHS is the inverse relationship (equation) predicting the Planck radiation spectral distribution parameterized by the Kelvin temperature T. Use is made of the conservation energy law of the heat capacity of Reservoir (RV) change T Δ S = -ΔE equals to the internal energy change of black box (bb) subsystem. Moreover, an irreversible thermodynamics Δ S > 0 for collision mixing toward totally larger uniformity of heat death, asserted by Boltzmann, that derived the so-called Maxwell-Boltzmann canonical probability. Given the zero boundary condition black box, Planck solved a discrete standing wave eigenstates (equation). Together with the canonical partition function (equation) an average ensemble average of all possible internal energy yielded the celebrated Planck radiation spectral (equation) where the density of states (equation). In summary, given the multispectral sensing data (equation), we applied Lagrange Constraint Neural Network (LCNN) to solve the Blind Sources Separation (BSS) for a set of equivalent bb target temperatures. From the measurements of specific value, slopes and shapes we can fit a set of Kelvin temperatures T's for each bb targets. As a result, we could apply the analytical continuation for each entropy sources along the temperature-unique Planck spectral curves always toward the RGB color temperature display for any sensing probing frequency.

  3. Satellite Monitoring for REDD: Radar vs. Optical

    Science.gov (United States)

    Mitchard, E. T.; Saatchi, S. S.; Ryan, C.; Woollen, E.; Goodman, L. E.; Williams, M.; Gerard, F.; Starkey, M.; Meir, P.

    2010-12-01

    The proposed REDD (Reducing Emissions from Deforestation and Degradation) protocol will only succeed in reducing emissions if deforestation and degradation can be accurately monitored. Ground surveys are prohibitively expensive over large areas, so satellite monitoring will be essential for independently monitoring deforestation and degradation rates, and thus calculating payments. In addition, remote sensing will be needed for developing historical baselines. It is clear that different methodologies will be needed for different project areas, scales and threat types. In addition different methodologies are needed depending on the capabilities of the countries in question: in the context of Africa for example, in-country monitoring tends to be at a basic level, yet for REDD it is important that countries are able to do their own monitoring, so simple methods must be developed and tested. In this paper we present change detection results for different remote sensing methodologies for potential REDD projects in Cameroon and Mozambique. We have shown previously that a good relationship exists between aboveground biomass (AGB) and L-band radar backscatter (Mitchard et al. 2009). The errors in estimation of absolute biomass were still relatively high, in the region of ±25 %. However, it is suspected that some of these errors are intransient, being due to the structure of the landscape and vegetation within a site, and so it has been predicted that errors in change detection are smaller than those for absolute estimation. We present evidence from these sites that this is indeed correct, using ALOS PALSAR L-band radar data from 2007, 2008 and 2009. Optical satellite data is widely used for monitoring deforestation, for example the excellent system run by INPE in Brazil. However, while optical data is good at detecting deforestation occurring progressively in large clear-fell blocks, as in the Amazon, it is less good at detecting small-scale deforestation or degradation

  4. Ultra-wideband noise radar based on optical waveform generation

    Science.gov (United States)

    Grodensky, Daniel; Kravitz, Daniel; Zadok, Avi

    2012-06-01

    A microwave-photonic, ultra-wideband (UWB) noise radar system is proposed and demonstrated. The system brings together photonic generation of UWB waveforms and fiber-optic distribution. The use of UWB noise provides high ranging resolution and better immunity to interception and jamming. Distribution over fibers allows for the separation the radar-operating personnel and equipment from the location of the front-end. The noise waveforms are generated using the amplified spontaneous emission that is associated with stimulated Brillouin scattering in a standard optical fiber, or with an erbium-doped fiber amplifier. Our experiments demonstrate a proof of concept for an integrated radar system, driven by optically generated UWB noise waveforms of more than 1 GHz bandwidth that are distributed over 10 km distance. The detection of concealed metallic object and the resolving of two targets with the anticipated ranging resolution are reported.

  5. Optical fiber reach extended FMCW radar for remote respiratory tracking

    DEFF Research Database (Denmark)

    Suhr, Lau Frejstrup; Tafur Monroy, Idelfonso; Vegas Olmos, Juan José

    2017-01-01

    Wireless monitoring of human vital signs such as breathing rate is a nonintrusive alternative to contemporary solutions relying on physical contact. To ease the installment, fiber optical transmission is used to extend the reach from the transmitter and receiver circuitry to the antenna subsystem....... In this paper, a frequency modulated carrier wave radar, operating at 25.7–26.6 GHz and utilizing optical fiber extension, was experimentally demonstrated to accurately recover the breathing rate of a human placed 1 m away from the radar antennas....

  6. Characteristics of an Optical Delay Line for Radar Testing

    Science.gov (United States)

    2016-04-12

    electrical devices, or allow unauthorized detection. In addition, integrity of the signals can be preserved travelling through long FODLs in...optical delay line, a commercial product from Miteq. The radar system parameters investigated were: small signal gain, 1 dB gain compression point...wide radio frequency (RF) bandwidth, low signal loss, compact and light weight, and highly resistant to electromagnetic interference. Fiber-based

  7. Optical-fiber-connected 300-GHz FM-CW radar system

    Science.gov (United States)

    Kanno, Atsushi; Sekine, Norihiko; Kasamatsu, Akifumi; Yamamoto, Naokatsu; Kawanishi, Tetsuya

    2017-05-01

    300-GHz frequency-modulated continuous-wave (FM-CW) radar system operated by radio over fiber technologies is configured and demonstrated. Centralized signal generator, which is based on an optical frequency comb generation, provides high-precise FM-CW radar signal. The optical signal is easy to be transported to radar heads through an optical fiber network. Optical-modulator-based optical frequency comb generator is utilized as an optical frequency multiplier from a microwave signal to a 300-GHz terahertz signal by an optical modulation technique. In the study, we discuss the configuration of the network, signal generator and remote radar head for terahertz-wave multi-static radar system.

  8. Simultaneous optical and radar observations of meteor head-echoes utilizing SAAMER

    Science.gov (United States)

    Michell, R. G.; Janches, D.; Samara, M.; Hormaechea, J. L.; Brunini, C.; Bibbo, I.

    2015-12-01

    We present simultaneous optical and radar observations of meteors observed with the Southern Argentine Agile MEteor Radar (SAAMER). Although such observations were performed in the past using High Power and Large Aperture radars, the focus here is on meteors that produced head echoes that can be detected by a significantly less sensitive but more accessible radar system. An observational campaign was conducted in August of 2011, where an optical imager was operated near the radar site in Rio Grande, Tierra del Fuego, Argentina. Six head echo events out of 150 total detections were identified where simultaneous optical meteors could also be clearly seen within the main radar beam. The location of the meteors derived from the radar interferometry agreed very well with the optical location, verifying the accuracy of the radar interferometry technique. The meteor speeds and origin directions calculated from the radar data were accurate-compared with the optics-for the 2 meteors that had radar signal-to-noise ratios above 2.5. The optical meteors that produced the head echoes had horizontal velocities in the range of 29-91 km/s. These comparisons with optical observations improve the accuracy of the radar detection and analysis techniques, such that, when applied over longer periods of time, will improve the statistics of southern hemisphere meteor observations. Mass estimates were derived using both the optical and radar data and the resulting masses agreed well with each other. All were within an order of magnitude and in most cases, the agreement was within a factor of two.

  9. Optical identification of sea-mines - Gated viewing three-dimensional laser radar

    DEFF Research Database (Denmark)

    Busck, Jens

    2005-01-01

    A gated viewing high accuracy mono-static laser radar has been developed for the purpose of improving the optical underwater sea-mine identification handled by the Navy. In the final stage of the sea-mine detection, classification and identification process the Navy applies a remote operated...... vehicle for optical identification of the bottom seamine. The experimental results of the thesis indicate that replacing the conventional optical video and spotlight system applied by the Navy with the gated viewing two- and three-dimensional laser radar can improve the underwater optical sea......-mine identification. The laser radar has also a number of applications on land, for example, face recognition at several hundred meters range. The main components of the laser radar system are a green pulsed laser and a fast gating intensified CCD camera. The laser radar system innovation is a combination...

  10. Observations and modeling of fog by cloud radar and optical sensors

    NARCIS (Netherlands)

    Li, Y.; Hoogeboom, P.; Russchenberg, H.

    2014-01-01

    Fog is a significant factor affecting the public traffic because visibility is reduced to a large extent. Therefore the determination of optical visibility in fog from radar instruments has received much interest. To observe fog with radar, high frequency bands (millimeter waves) have the best

  11. Observations and modeling of fog by cloud radar and optical sensors

    NARCIS (Netherlands)

    Li, Y.; Hoogeboom, P.; Russchenberg, H.

    2014-01-01

    Fog is a significant factor affecting the public traffic because visibility is reduced to a large extent. Therefore the determination of optical visibility in fog from radar instruments has received much interest. To observe fog with radar, high frequency bands (millimeter waves) have the best optio

  12. Time-integrating acousto-optic correlator for wideband random noise radar

    Science.gov (United States)

    Kim, Sangtaek; Narayanan, Ram; Zhou, Wei; Wagner, Kelvin

    2004-10-01

    A time-integrating acousto-optic correlator (TIAOC) is a good candidate for imaging and target detection using a wideband random noise radar system. We have developed such a correlator for a random noise radar with a signal frequency range of 1-2 GHz. This system has demonstrated good wideband signal correlation performance with good dynamic range and fine tuning of delays.

  13. Marine parameters from synergy of optical and radar satellite data

    Science.gov (United States)

    Lehner, S.; Hoja, D.; Schulz-Stellenfleth, J.

    In 2001 the European Space Agency ESA will launch the earth observation satellite ENVISAT. It will carry several instruments that provide new opportunities to measure oceanographic variables. Together, they represent the main measurement techniques of satellite oceanography, and complement each other in an ideal manner. These instruments are to be used in synergy to: Improve the analysis of measured wind and ocean wave fields, and thereby improve weather forecasting at weather centers; Determine the extent and variables of sea ice and develop a five-day sea ice prediction model, to support maritime shipping and offshore activities; Monitor and map sediment and suspended matter transport in coastal regions, especially in areas with large river estuaries, which greatly affects shipping lanes, harbors, and dredging activities; Monitor hydrobiological and bio-geochemical variables related to water quality in coastal regions and large inland waters, which affects ecology, coastal development, aquaculture, drinking water supplies, and tourism. To prepare the oceanographic community to make best use of the ENVISAT sensors in the pre-launch phase, existing algorithms to derive marine parameters are used and validated using data from the ERS SAR, the ERS RA, SeaWiFS and IRS MOS sensors now in operation. Derived products are used to address problems that can best be tackled using the synergy of radar and optical data, such as the effect of surface slicks on radar wind measurements, of sea state on ocean color, of wind and waves on the resuspension of suspended matter, and of wind and waves on sea ice variables.

  14. Integrated High-Speed Digital Optical True-Time-Delay Modules for Synthetic Aperture Radars Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Crystal Research, Inc. proposes an integrated high-speed digital optical true-time-delay module for advanced synthetic aperture radars. The unique feature of this...

  15. Broadband polarization interferometric time-integrating acousto-optic correlator for random noise radar

    Science.gov (United States)

    Kim, Sangtaek; Wagner, Kelvin H.; Narayanan, Ram M.; Zhou, Wei

    2005-10-01

    We describe a time-integrating acousto-optic correlator (TIAOC) developed for imaging and target detection using a wideband random-noise radar system. This novel polarization interferometric in-line TIAOC uses an intensity-modulated laser diode for the random noise reference and a polarization-switching, self-collimating acoustic shear-mode gallium phosphide (GaP) acousto-optic device for traveling-wave modulation of the radar returns. The time-integrated correlation output is detected on a 1-D charge-coupled device (CCD) detector array and calibrated and demodulated in real time to produce the complex radar range profile. The complex radar reflectivity is measured in more than 150 radar range bins in parallel on the 3000 pixels of the CCD, improving target acquisition speeds and sensitivities by 150 over previous serial analog correlator approaches. The polarization interferometric detection of the correlation using the undiffracted light as the reference allows us to use the full acousto-optic device (AOD) bandwidth as the system bandwidth. Also, the experimental result shows the fully complex random-noise signal correlation and coherent demodulation without an explicit carrier, demonstrating that optically processed random-noise radars do not need a stable local oscillator.

  16. Retrieve Optically Thick Ice Cloud Microphysical Properties by Using Airborne Dual-Wavelength Radar Measurements

    Science.gov (United States)

    Wang, Zhien; Heymsfield, Gerald M.; Li, Lihua; Heymsfield, Andrew J.

    2005-01-01

    An algorithm to retrieve optically thick ice cloud microphysical property profiles is developed by using the GSFC 9.6 GHz ER-2 Doppler Radar (EDOP) and the 94 GHz Cloud Radar System (CRS) measurements aboard the high-altitude ER-2 aircraft. In situ size distribution and total water content data from the CRYSTAL-FACE field campaign are used for the algorithm development. To reduce uncertainty in calculated radar reflectivity factors (Ze) at these wavelengths, coincident radar measurements and size distribution data are used to guide the selection of mass-length relationships and to deal with the density and non-spherical effects of ice crystals on the Ze calculations. The algorithm is able to retrieve microphysical property profiles of optically thick ice clouds, such as, deep convective and anvil clouds, which are very challenging for single frequency radar and lidar. Examples of retrieved microphysical properties for a deep convective clouds are presented, which show that EDOP and CRS measurements provide rich information to study cloud structure and evolution. Good agreement between IWPs derived from an independent submillimeter-wave radiometer, CoSSIR, and dual-wavelength radar measurements indicates accuracy of the IWC retrieved from the two-frequency radar algorithm.

  17. Optical-network-connected multi-channel 96-GHz-band distributed radar system

    Science.gov (United States)

    Kanno, Atsushi; Kuri, Toshiaki; Kawanishi, Tetsuya

    2015-05-01

    The millimeter-wave (MMW) radar is a promising candidate for high-precision imaging because of its short wavelength and broad range of available bandwidths. In particular in the frequency range of 92-100 GHz, which is regulated for radiolocation, an atmospheric attenuation coefficient less than 1 dB/km limits the imaging range. Therefore, a combination of MMW radar and distributed antenna system directly connected to optical fiber networks can realize both high-precision imaging and large-area surveillance. In this paper, we demonstrate a multi-channel MMW frequency-modulated continuous-wave distributed radar system connected to an analog radio-over-fiber network.

  18. Radar model fusion of asteroid (4179) Toutatis via its optical images observed by Chang'e-2 probe

    Science.gov (United States)

    Zhao, Wei; Xiao, Ting; Liu, Peng; Sun, Lei; Huang, Jiangchuan; Tang, Xianglong

    2016-06-01

    Asteroid (4179) Toutatis has been modeling by ground-based radar observations until Dec 13th, 2012, when distinct optical images of Toutatis were captured during the Chang'e-2 flyby at the shortest distance for the first time. The surface details on Toutatis in the optical images are abundant enough to reinforce the radar model descriptions. Under this context, we customized a method of frequency domain data fusion, which combines the topography information of radar model and the 3rd dimension information estimated from optical image by shape from shading algorithm, and gave out a new Toutatis' radar model. A model with abundant surface characteristics had been resulted.

  19. Monitoring of Damage in Sunflower and Maize Parcels Using Radar and Optical Time Series Data

    Directory of Open Access Journals (Sweden)

    György Surek

    2015-01-01

    Full Text Available The objective of this paper is to monitor the temporal behaviour of geometrical structural change of cropland affected by four different types of damage: weed infection, Western Corn Rootworm (WCR, storm damage, and drought by time series of different type of optical and quad-pol RADARSAT2 data. Based on our results it is established that ragweed infection in sunflower can be well identified by evaluation of radar (mid-June and optical (mid-August satellite images. Effect of drought in sunflower is well recognizable by spectral indices derived from optical as well as “I”-component of Shannon entropy (SEI from radar satellite images acquired during the first decade of July. Evaluation of radar and optical satellite images acquired between the last decade of July and mid-August proven to be the most efficient for detecting damages in maize fields caused by either by WCR or storm. Components of Shannon entropy are proven to have significant role in identification. Our project demonstrates the potential in integrated usage of polarimetric radar and optical satellite images for monitoring several types of agricultural damage.

  20. Adaptive high-frequency information fusion algorithm of radar and optical images

    Science.gov (United States)

    Wang, Yiding; Qin, Shuai

    2011-12-01

    An adaptive High-frequency Information Fusion Algorithm of Radar and Optical Images is proposed in this paper, in order to improve the resolution of the radar image and reserve more radar information. Firstly, Hough Transform is adopted in the process of low-resolution radar image and high-resolution optical image registration. The implicit linear information is extracted from two different heterogeneous images for better result. Then NSCT transform is used for decomposition and fusion. In different decomposition layers or in the same layer with different directions, fusion rules are adaptive for the high-frequency information of images. The ratio values of high frequency information entropy, variance, gradient and edge strength are calculated after NSCT decomposition. High frequency information entropy, variance, gradient or edge strength, which has the smallest ratio value, is selected as an optimal rule for regional fusion. High-frequency information of radar image could be better retained, at the same time the low-frequency information of optical image also could be remained. Experimental results showed that our approach performs better than those methods with single fusion rule.

  1. Design and Realization of Phased Array Radar Optical Fiber Transmission System

    Institute of Scientific and Technical Information of China (English)

    HU Shan-qing; LIU Feng; LONG Teng

    2007-01-01

    One optical fiber transmission system is designed.The modularization optical fiber transmission adapters were utilized in the system,so the system structure could be flexibly scalable.The sub-array adapter and signal processor adapter were designed and realized utilizing the new field programmable gate array (FPGA) which could drive the optical transceiver.The transmission agreement was designed based on the data stream.In order to solve the signal synchronization problem of the optical fiber transmitted phased array radar,a method named synchronous clock was designed.The fiber transmission error code rate of the system was zero with an experimental transmission velocity of 800 Mbit/s.The phased array radar system has detected the airplane target,thus validated the feasibility of the design method.

  2. Detection of acoustic, electro-optical and RADAR signatures of small unmanned aerial vehicles

    Science.gov (United States)

    Hommes, Alexander; Shoykhetbrod, Alex; Noetel, Denis; Stanko, Stephan; Laurenzis, Martin; Hengy, Sebastien; Christnacher, Frank

    2016-10-01

    We investigated signatures of small unmanned aerial vehicles (UAV) with different sensor technologies ranging from acoustical antennas, passive and active optical imaging devices to small-size FMCW RADAR systems. These sensor technologies have different advantages and drawbacks and can be applied in a complementary sensor network to benefit from their different strengths.

  3. Optical techniques for signal distribution and control in advanced radar and communication systems

    Science.gov (United States)

    Forrest, J. R.

    1985-03-01

    It is concluded that optical techniques offer some advantages for signal distribution and control in advanced radar and communication systems. They are clearly ideal for transporting microwave signals over considerable distances, as in remote positioning of radar receivers, provided high dynamic range is not required and an enclosed transmission path is essential. They are an elegant means of distributing low level r.f. or i.f. signals around an active phased array where these signals are of relatively constant amplitude (as in mixer local oscillator applications). However, there is currently a rather restrictive limit on the size of distribution network possible. Optical techniques are obviously suitable for distributing digital control signals to phased array modules and confer considerable immunity to interference. They are less suitable for high dynamic range signals, such as the received radar returns, either at r.f. or when downcovered to i.f. Future developments in coherent optics or in fast optical A/D technology could, however, influence this conclusion. Currently, the optimum applications for optical techniques appear to be i.f. beamformers for multibeam communication satellite systems and in calibration/monitoring systems for phased arrays.

  4. Phase calibration of the EISCAT Svalbard Radar interferometer using optical satellite signatures

    Directory of Open Access Journals (Sweden)

    J. M. Sullivan

    2006-09-01

    Full Text Available The link between natural ion-line enhancements in radar spectra and auroral activity has been the subject of recent studies but conclusions have been limited by the spatial and temporal resolution previously available. The next challenge is to use shorter sub-second integration times in combination with interferometric programmes to resolve spatial structure within the main radar beam, and so relate enhanced filaments to individual auroral rays. This paper presents initial studies of a technique, using optical and spectral satellite signatures, to calibrate the received phase of a signal with the position of the scattering source along the interferometric baseline of the EISCAT Svalbard Radar. It is shown that a consistent relationship can be found only if the satellite passage through the phase fringes is adjusted from the passage predicted by optical tracking. This required adjustment is interpreted as being due to the vector between the theoretical focusing points of the two antennae, i.e. the true radar baseline, differing from the baseline obtained by survey between the antenna foot points. A method to obtain a measurement of the true interferometric baseline using multiple satellite passes is outlined.

  5. A method for measuring precipitation parameters and raindrop size distributions using radar reflectivity and optical extinction

    Science.gov (United States)

    Ulbrich, C. W.; Atlas, D.

    1977-01-01

    A method of determining precipitation parameters from two remotely measurable quantities, the radar reflectivity factor and the optical extinction, is described. The raindrop size spectrum is approximated by a two-parameter exponential form; when these parameters are evaluated in terms of the radar reflectivity factor and the optical extinction, an exponential spectrum is obtained that is generally in very good agreement with the observed size spectrum. Other calculated precipitation parameters, such as rainfall rate and liquid water content, which are derived from the exponential approximation, also agree with experimental data. It is indicated that other combinations of two remote measurables can also be used to obtain more accurate estimates of precipitation parameters than can be obtained by the use of an empirical relationship.

  6. Comparison of MESSENGER Optical Images with Thermal and Radar Data for the Surface of MERCURY

    Science.gov (United States)

    Blewett, D. T.; Coman, E. I.; Chabot, N. L.; Izenberg, N. R.; Harmon, J. K.; Neish, C.

    2010-12-01

    Images collected by the MESSENGER spacecraft during its three Mercury flybys cover nearly the entire surface of the planet that was not imaged by Mariner 10. The MESSENGER data now allow us to observe features at optical wavelengths that were previously known only through remote sensing in other portions of the electromagnetic spectrum. For example, the Mariner 10 infrared (IR) radiometer made measurements along a track on the night side of Mercury during the spacecraft's first encounter in 1974. Analysis of the IR radiometer data identified several thermal anomalies that we have correlated to craters with extensive rays or ejecta deposits, including Xiao Zhao and Eminescu. The thermal properties are consistent with a greater exposure of bare rock (exposed in steep walls or as boulders and cobbles) in and around these craters compared with the lower-thermal-inertia, finer-grained regolith of the surrounding older surface. The portion of Mercury not viewed by Mariner 10 has also been imaged by Earth-based radar. The radar backscatter gives information on the wavelength-scale surface roughness. Arecibo S-band (12.6-cm wavelength) radar observations have produced images of Eminescu and also revealed two spectacular rayed craters (Debussy and Hokusai) that have since been imaged by MESSENGER. We are examining radial profiles for these craters, extracted from both the radar images and MESSENGER narrow-angle camera mosaics, that extend from the crater center outwards to a distance of several crater diameters. Comparison of optical and radar profiles for the craters, as well as similar profiles for lunar craters, can provide insight into ejecta deposition, the effect of surface gravity on the cratering process, and space weathering.

  7. A low-cost, high-resolution, video-rate imaging optical radar

    Energy Technology Data Exchange (ETDEWEB)

    Sackos, J.T.; Nellums, R.O.; Lebien, S.M.; Diegert, C.F. [Sandia National Labs., Albuquerque, NM (United States); Grantham, J.W.; Monson, T. [Air Force Research Lab., Eglin AFB, FL (United States)

    1998-04-01

    Sandia National Laboratories has developed a unique type of portable low-cost range imaging optical radar (laser radar or LADAR). This innovative sensor is comprised of an active floodlight scene illuminator and an image intensified CCD camera receiver. It is a solid-state device (no moving parts) that offers significant size, performance, reliability, and simplicity advantages over other types of 3-D imaging sensors. This unique flash LADAR is based on low cost, commercially available hardware, and is well suited for many government and commercial uses. This paper presents an update of Sandia`s development of the Scannerless Range Imager technology and applications, and discusses the progress that has been made in evolving the sensor into a compact, low, cost, high-resolution, video rate Laser Dynamic Range Imager.

  8. Identification of Structural Changes Caused by Weed Infection in Agriculture by Optical and Radar Data

    Science.gov (United States)

    Nador, Gizella; Surek, Gyorgy; Fenyes, Diana; Ocsai, Katalin; Linda Toth, Gracia; Akos Gera, David; Hubik, Iren; Simon, Andras; Torok, Cecilia

    2011-03-01

    In most cases the healthy, weed-free cropland has a regular geometric structure determined by sowing technique and plant-to-plant distances. Several plant diseases and weed infections can cause disorders and structural changes in cropland. According to our experience, this type of geometrical changes can be well detected by using polarimetric radar images (RADARSAT2, ALOS PALSAR) with different polarizations (dual, quad) and wavelengths (C, L band).We analyze agricultural damages resulting in structural changes in different croplands. In this paper we propose to complete the methodology of identifying these agricultural damages based on the integrated use of optical and radar satellite images. We focused on the detection of ragweed infection on sunflower lands. According to our results it is possible to develop a methodology based on the quantitative evaluation of polarimetric features which enables us to identify ragweed infected sunflower lands before the beginning of pollen scattering (beginning of August).

  9. Single-frequency mid-infrared optical parametric oscillator source for coherent laser radar.

    Science.gov (United States)

    Hanson, F; Poirier, P; Arbore, M A

    2001-11-15

    We report on the design and characterization of a highly coherent mid-IR source at 3.57mum based on a single-frequency optical parametric oscillator. Detailed frequency and amplitude noise spectra have been measured. The rms intensity noise from 1.2 to 1000 Hz was 0.03%, and a rms frequency drift of 8 kHz in 1 ms was observed. We have also demonstrated the utility of this source for coherent laser radar applications by measuring micro-Doppler spectra from vibrating targets.

  10. Flood mapping by combining the strengths of optical and Sentinel active radar remote sensing

    Science.gov (United States)

    Winsemius, H. C.; Brakenridge, G. R.; Westerhoff, R.; Huizinga, J.; Villars, N.; Bishop, C.

    2012-04-01

    Flood mapping with remote sensing plays an important role in large scale disaster management procedures. For this purpose, the Dartmouth Flood Observatory (DFO) gained experience since 1993 with the production of flood maps from optical satellite imagery and has currently established, together with NASA collaborators, a fully automated, global, near real-time service. Another consortium is also presently working on an automated, near real-time, global flood mapping procedure called the 'Global Flood Observatory' (GFO), which will make use of high resolution Sentinel data. The procedure is currently tested on Envisat active radar (ASAR) imagery. Both the DFO and GFO projects provide open data output of their data and maps. The optical and radar approaches to flood mapping each have advantages and suffer from shortcomings. Optical remote sensing via the U.S. MODIS and VIIRS sensors is constrained by cloud cover but can attain a high revisit frequency (>2 /day), whereas the Envisat ASAR is not affected by cloud cover, but uses a lower revisit frequency (generally once/3 days, depending on the location). In this contribution, we demonstrate the combination of both approaches into one flood mapping result. This results in improved flood mapping in a case study over the Chao Phraya basin (Bangkok surroundings) during the recent October-November 2011 extreme flooding. The combined map shows that during overpass, ASAR reveals flooded regions over cloud-obscured areas, which clearly follow elevated features in the landscape such as roads, embankments and railways. Meanwhile, the high frequency of delivery of the optical information ensures timely information. Also, the quite different water classification methods used for the optical and ASAR data sources show good agreement and have been successfully merged into one GIS data product. This can also be automatically generated and disseminated on a global basis.

  11. Combined Use of Multi-Temporal Optical and Radar Satellite Images for Grassland Monitoring

    Directory of Open Access Journals (Sweden)

    Pauline Dusseux

    2014-06-01

    Full Text Available The aim of this study was to assess the ability of optical images, SAR (Synthetic Aperture Radar images and the combination of both types of data to discriminate between grasslands and crops in agricultural areas where cloud cover is very high most of the time, which restricts the use of visible and near-infrared satellite data. We compared the performances of variables extracted from four optical and five SAR satellite images with high/very high spatial resolutions acquired during the growing season. A vegetation index, namely the NDVI (Normalized Difference Vegetation Index, and two biophysical variables, the LAI (Leaf Area Index and the fCOVER (fraction of Vegetation Cover were computed using optical time series and polarization (HH, VV, HV, VH. The polarization ratio and polarimetric decomposition (Freeman–Durden and Cloude–Pottier were calculated using SAR time series. Then, variables derived from optical, SAR and both types of remotely-sensed data were successively classified using the Support Vector Machine (SVM technique. The results show that the classification accuracy of SAR variables is higher than those using optical data (0.98 compared to 0.81. They also highlight that the combination of optical and SAR time series data is of prime interest to discriminate grasslands from crops, allowing an improved classification accuracy.

  12. Evidence of hydrocarbon pollution in soil exploiting satellite optical and radar images

    Science.gov (United States)

    Monsivais-Huertero, A.; Galvan-Pineda, J.; Espinosa-Hernandez, A.; Jimenez-Escalona, J. C.; Ramos-Rodriguez, J. M.

    2013-05-01

    Oil spills are one of the most important sources of hydrocarbon pollution in soils of areas near centers of extraction, storage or transportation of petroleum products. These spills or leaks can occur arising from deficient maintenance of facilities or accidents. The effects of these spills can spread for kilometers affecting large areas. This has a strong impact on the local ecosystem disturbing the flora and fauna. In costal tourist areas, this type of contaminants represents significant health risks for visitors and therefore, economic losses for the place. For this reason, it is very important to know and identify the areas affected by this type of pollution in order to create action plans for remediation of the ecosystem. Due to the large land extensions that can cover such disasters, satellite images become a valuable tool because of their large spatial coverage. Nowadays, different satellite techniques have been developed to recognize land affected by the presence of hydrocarbons. In the optical spectrum, optical sensing imagery (e.g. Landsat, SPOT, MODIS, etc.) has been widely used. However, these techniques have the intrinsic limitation in scenes with vegetation cover. In contrast, techniques exploiting radar images are still rare. The type of signal that is detected by the radar provides information even in areas with vegetation cover. The radar signal interacts with the vegetation and soil collecting information about the dielectric properties of the soil. This study identifies zones of contaminated soil by using the synergy of optical and radar images. This site of study is located in Paraiso, Tabasco, in Southern Mexico (18°27'N 93°32'W). The region is composed of coastal and tropical forest ecosystems and includes the Port Dos Bocas. The Port Dos Bocas has its points of extractions 130m away from the coast. The annual activities report 10 millions of tons of hydrocarbons transported using around 5500 ships. The methodology presented in this paper

  13. ANALYSIS OF RADAR AND OPTICAL SPACE BORNE DATA FOR LARGE SCALE TOPOGRAPHICAL MAPPING

    Directory of Open Access Journals (Sweden)

    W. Tampubolon

    2015-03-01

    Full Text Available Normally, in order to provide high resolution 3 Dimension (3D geospatial data, large scale topographical mapping needs input from conventional airborne campaigns which are in Indonesia bureaucratically complicated especially during legal administration procedures i.e. security clearance from military/defense ministry. This often causes additional time delays besides technical constraints such as weather and limited aircraft availability for airborne campaigns. Of course the geospatial data quality is an important issue for many applications. The increasing demand of geospatial data nowadays consequently requires high resolution datasets as well as a sufficient level of accuracy. Therefore an integration of different technologies is required in many cases to gain the expected result especially in the context of disaster preparedness and emergency response. Another important issue in this context is the fast delivery of relevant data which is expressed by the term “Rapid Mapping”. In this paper we present first results of an on-going research to integrate different data sources like space borne radar and optical platforms. Initially the orthorectification of Very High Resolution Satellite (VHRS imagery i.e. SPOT-6 has been done as a continuous process to the DEM generation using TerraSAR-X/TanDEM-X data. The role of Ground Control Points (GCPs from GNSS surveys is mandatory in order to fulfil geometrical accuracy. In addition, this research aims on providing suitable processing algorithm of space borne data for large scale topographical mapping as described in section 3.2. Recently, radar space borne data has been used for the medium scale topographical mapping e.g. for 1:50.000 map scale in Indonesian territories. The goal of this on-going research is to increase the accuracy of remote sensing data by different activities, e.g. the integration of different data sources (optical and radar or the usage of the GCPs in both, the optical and the

  14. Application of Radar and Optical Images to Create Copernicus High Resolution Layers: Case Studies in Hungary

    Science.gov (United States)

    Surek, Gyorgy; Nador, Gizella; Friedl, Zoltan; Gyimesi, Balint; Rada, Matyas; Akos Gera, David; Hubik, Iren; Rotterne Kulesar, Aniko; Totok, Cecilia

    2016-08-01

    Injection of SAR imagery based information in the production of Copernicus High Resolution Layers can help to refine information served by optical satellite imagery, together with a-priori knowledge it may overcome the gaps caused by the cloud cover issue. However, this requires a methodological adaptation, given the different nature of SAR as compared to optical data. The methodological adaptation shall allow for an operational implementation, and shall help reducing the elapsed time between available satellite imagery. This requires the analysis of the potential use of SAR based imagery in the COPERNICUS land context, supported with case studies. In this paper the contribution of radar polarimetry for distinguishing land cover categories is evaluated.

  15. CLASSIFIER FUSION OF HIGH-RESOLUTION OPTICAL AND SYNTHETIC APERTURE RADAR (SAR SATELLITE IMAGERY FOR CLASSIFICATION IN URBAN AREA

    Directory of Open Access Journals (Sweden)

    T. Alipour Fard

    2014-10-01

    Full Text Available This study concerned with fusion of synthetic aperture radar and optical satellite imagery. Due to the difference in the underlying sensor technology, data from synthetic aperture radar (SAR and optical sensors refer to different properties of the observed scene and it is believed that when they are fused together, they complement each other to improve the performance of a particular application. In this paper, two category of features are generate and six classifier fusion operators implemented and evaluated. Implementation results show significant improvement in the classification accuracy.

  16. Ultra-Wideband Radar for Breath Tracking with Optical Fiber for Remote Reach Extension

    DEFF Research Database (Denmark)

    Suhr, Lau Frejstrup; Tafur Monroy, Idelfonso; Vegas Olmos, Juan José

    2016-01-01

    We report on the experimental demonstration of an UWB radar with fiber extension for remote breath tracking through 10 cm of concrete. The radar is based on telecom class equipment.......We report on the experimental demonstration of an UWB radar with fiber extension for remote breath tracking through 10 cm of concrete. The radar is based on telecom class equipment....

  17. Design, Analysis, and Characterization of Metamaterial Quasi-Optical Components for Millimeter-Wave Automotive Radar

    Science.gov (United States)

    Nguyen, Vinh Ngoc

    Since their introduction by Mercedes Benz in the late 1990s, W-band radars operating at 76-77 GHz have found their way into more and more passenger cars. These automotive radars are typically used in adaptive cruise control, pre-collision sensing, and other driver assistance systems. While these systems are usually only about the size of two stacked cigarette packs, system size, and weight remains a concern for many automotive manufacturers. In this dissertation, I discuss how artificially structured metamaterials can be used to improve lens-based automotive radar systems. Metamaterials allow the fabrication of smaller and lighter systems, while still meeting the frequency, high gain, and cost requirements of this application. In particular, I focus on the development of planar artificial dielectric lenses suitable for use in place of the injection-molded lenses now used in many automotive radar systems. I begin by using analytic and numerical ray-tracing to compare the performance of planar metamaterial GRIN lenses to equivalent aspheric refractive lenses. I do this to determine whether metamaterials are best employed in GRIN or refractive automotive radar lenses. Through this study I find that planar GRIN lenses with the large refractive index ranges enabled by metamaterials have approximately optically equivalent performance to equivalent refractive lenses for fields of view approaching +/-20°. I also find that the uniaxial nature of most planar metamaterials does not negatively impact planar GRIN lens performance. I then turn my attention to implementing these planar GRIN lenses at W-band automotive radar frequencies. I begin by designing uniform sheets of W-band electrically-coupled LC resonator-based metamaterials. These metamaterial samples were fabricated by the Jokerst research group on glass and liquid crystal polymer (LCP) substrates and tested at Toyota Research Institute- North America (TRI-NA). When characterized at W-band frequencies, these

  18. A review of the application of optical and radar remote sensing data fusion to land use mapping and monitoring

    NARCIS (Netherlands)

    Joshi, Neha; Baumann, Matthias; Ehammer, Andrea; Reiche, Johannes

    2016-01-01

    The wealth of complementary data available from remote sensing missions can hugely aid efforts towards accurately determining land use and quantifying subtle changes in land use management or intensity. This study reviewed 112 studies on fusing optical and radar data, which offer unique spectral

  19. On the design and construction of drifting-mine test targets for sonar, radar and electro-optical detection experiments

    NARCIS (Netherlands)

    Dol, H.S.

    2014-01-01

    The timely detection of small hazardous objects at the sea surface, such as drifting mines, is challenging for ship-mounted sensor systems, both for underwater sensor systems like sonar and above-water sensor systems like radar and electro-optics (lidar, infrared/visual cameras). This is due to the

  20. A forward model for ground penetrating radar imaging of buried perfect electric conductors within the physical optics approximation

    DEFF Research Database (Denmark)

    Polat, Burak; Meincke, Peter

    2004-01-01

    A forward model for ground penetrating radar imaging of buried 3-D perfect electric conductors is addressed within the framework of diffraction tomography. The similarity of the present forward model derived within the physical optics approximation with that derived within the first Born...

  1. Polarisation in the auroral red line during coordinated EISCAT Svalbard Radar/optical experiments

    Directory of Open Access Journals (Sweden)

    M. Barthélémy

    2011-06-01

    Full Text Available The polarisation of the atomic oxygen red line in the Earth's thermosphere is observed in different configurations with respect to the magnetic field line at high latitude during several coordinated Incoherent Scatter radar/optical experiment campaigns. When pointing northward with a line-of-sight nearly perpendicular to the magnetic field, we show that, as expected, the polarisation is due to precipitated electrons with characteristic energies of a few hundreds of electron Volts. When pointing toward the zenith or southward with a line-of-sight more parallel to the magnetic field, we show that the polarisation practically disappears. This confirms experimentally the predictions deduced from the recent discovery of the red line polarisation. We show that the polarisation direction is parallel to the magnetic field line during geomagnetic activity intensification and that these results are in agreement with theoretical work.

  2. Comparative rainfall data analysis from two vertically pointing radars, an optical disdrometer, and a rain gauge

    Directory of Open Access Journals (Sweden)

    E. I. Nikolopoulos

    2008-12-01

    Full Text Available The authors present results of a comparative analysis of rainfall data from several ground-based instruments. The instruments include two vertically pointing Doppler radars, S-band and X-band, an optical disdrometer, and a tipping-bucket rain gauge. All instruments were collocated at the Iowa City Municipal Airport in Iowa City, Iowa, for a period of several months. The authors used the rainfall data derived from the four instruments to first study the temporal variability and scaling characteristics of rainfall and subsequently assess the instrumental effects on these derived properties. The results revealed obvious correspondence between the ground and remote sensors, which indicates the significance of the instrumental effect on the derived properties.

  3. A comparison of optical and coherent HF radar backscatter observations of a post-midnight aurora

    Directory of Open Access Journals (Sweden)

    S. E. Milan

    Full Text Available A poleward-progressing 630 nm optical feature is observed between approximately 0100 UT and 0230 UT (0400 MLT to 0530 MLT by a meridian-scanning photometer (MSP located at Ny Ålesund, Svalbard. Simultaneous coherent HF radar measurements indicate a region of poleward-expanding backscatter with rapid sunward plasma flow velocity along the MSP meridian. Spatial maps of the backscatter indicate a stationary backscatter feature aligned obliquely with respect to the MSP meridian, which produces an impression of poleward-expansion as the MSP progresses to later MLT. Two interpretations of the observations are possible, depending on whether the arc system is considered to move (time-dependent or to be stationary in time and apparent motion is produced as the MSP meridian rotates underneath it (time-independent. The first interpretation is as a poleward motion of an east-west aligned auroral arc. In this case the appearance of the region of backscatter is not associated with the optical feature, though the velocities within it are enhanced when the two are co-located. The second interpretation is as a polar arc or theta aurora, common features of the polar cap under the prevailing IMF northwards conditions. In this case the backscatter appears as an approximately 150 km wide region adjacent to the optical arc. In both interpretations the luminosity of the optical feature appears related to the magnitude of the plasma flow velocity. The optical features presented here do not generate appreciable HF coherent backscatter, and are only identifiable in the backscatter data as a modification of the flow by the arc electrodynamics.

  4. Rapid Assessment of Earthquakes with Radar and Optical Geodetic Imaging and Finite Fault Models (Invited)

    Science.gov (United States)

    Fielding, E. J.; Sladen, A.; Simons, M.; Rosen, P. A.; Yun, S.; Li, Z.; Avouac, J.; Leprince, S.

    2010-12-01

    Earthquake responders need to know where the earthquake has caused damage and what is the likely intensity of damage. The earliest information comes from global and regional seismic networks, which provide the magnitude and locations of the main earthquake hypocenter and moment tensor centroid and also the locations of aftershocks. Location accuracy depends on the availability of seismic data close to the earthquake source. Finite fault models of the earthquake slip can be derived from analysis of seismic waveforms alone, but the results can have large errors in the location of the fault ruptures and spatial distribution of slip, which are critical for estimating the distribution of shaking and damage. Geodetic measurements of ground displacements with GPS, LiDAR, or radar and optical imagery provide key spatial constraints on the location of the fault ruptures and distribution of slip. Here we describe the analysis of interferometric synthetic aperture radar (InSAR) and sub-pixel correlation (or pixel offset tracking) of radar and optical imagery to measure ground coseismic displacements for recent large earthquakes, and lessons learned for rapid assessment of future events. These geodetic imaging techniques have been applied to the 2010 Leogane, Haiti; 2010 Maule, Chile; 2010 Baja California, Mexico; 2008 Wenchuan, China; 2007 Tocopilla, Chile; 2007 Pisco, Peru; 2005 Kashmir; and 2003 Bam, Iran earthquakes, using data from ESA Envisat ASAR, JAXA ALOS PALSAR, NASA Terra ASTER and CNES SPOT5 satellite instruments and the NASA/JPL UAVSAR airborne system. For these events, the geodetic data provided unique information on the location of the fault or faults that ruptured and the distribution of slip that was not available from the seismic data and allowed the creation of accurate finite fault source models. In many of these cases, the fault ruptures were on previously unknown faults or faults not believed to be at high risk of earthquakes, so the area and degree of

  5. Satellite optical and radar data used to track wetland forest impact and short-term recovery from Hurricane Katrina

    Science.gov (United States)

    Ramsey, Elijah W.; Rangoonwala, A.; Middleton, B.; Lu, Zhiming

    2009-01-01

    Satellite Landsat Thematic Mapper (TM) and RADARSAT-1 (radar) satellite image data collected before and after the landfall of Hurricane Katrina in the Pearl River Wildlife Management Area on the Louisiana-Mississippi border, USA, were applied to the study of forested wetland impact and recovery. We documented the overall similarity in the radar and optical satellite mapping of impact and recovery patterns and highlighted some unique differences that could be used to provide consistent and relevant ecological monitoring. Satellite optical data transformed to a canopy foliage index (CFI) indicated a dramatic decrease in canopy cover immediately after the storm, which then recovered rapidly in the Taxodium distichum (baldcypress) and Nyssa aquatica (water tupelo) forest. Although CFI levels in early October indicated rapid foliage recovery, the abnormally high radar responses associated with the cypress forest suggested a persistent poststorm difference in canopy structure. Impact and recovery mapping results showed that even though cypress forests experienced very high wind speeds, damage was largely limited to foliage loss. Bottomland hardwoods, experiencing progressively lower wind speeds further inland, suffered impacts ranging from increased occurrences of downed trees in the south to partial foliage loss in the north. In addition, bottomland hardwood impact and recovery patterns suggested that impact severity was associated with a difference in stand structure possibly related to environmental conditions that were not revealed in the prehurricane 25-m optical and radar image analyses. ?? 2009 The Society of Wetland Scientists.

  6. On the exploitation of optical and thermal band for river discharge estimation: synergy with radar altimetry

    Science.gov (United States)

    Tarpanelli, Angelica; Filippucci, Paolo; Brocca, Luca

    2017-04-01

    River discharge is recognized as a fundamental physical variable and it is included among the Essential Climate Variables by GCOS (Global Climate Observing System). Notwithstanding river discharge is one of the most measured components of the hydrological cycle, its monitoring is still an open issue. Collection, archiving and distribution of river discharge data globally is limited, and the currently operating network is inadequate in many parts of the Earth and is still declining. Remote sensing, especially satellite sensors, have great potential in offering new ways to monitor river discharge. Remote sensing guarantees regular, uniform and global measurements for long period thanks to the large number of satellites launched during the last twenty years. Because of its nature, river discharge cannot be measured directly and both satellite and traditional monitoring are referred to measurements of other hydraulic variables, e.g. water level, flow velocity, water extent and slope. In this study, we illustrate the potential of different satellite sensors for river discharge estimation. The recent advances in radar altimetry technology offered important information for water levels monitoring of rivers even if the spatio-temporal sampling is still a limitation. The multi-mission approach, i.e. interpolating different altimetry tracks, has potential to cope with the spatial and temporal resolution, but so far few studies were dedicated to deal with this issue. Alternatively, optical sensors, thanks to their frequent revisit time and large spatial coverage, could give a better support for the evaluation of river discharge variations. In this study, we focus on the optical (Near InfraRed) and thermal bands of different satellite sensors (MODIS, MERIS, AATSR, Landsat, Sentinel-2) and particularly, on the derived products such as reflectance, emissivity and land surface temperature. The performances are compared with respect to the well-known altimetry (Envisat/Ra-2, Jason

  7. Surface Water Detection Using Fused Synthetic Aperture Radar, Airborne LiDAR and Optical Imagery

    Science.gov (United States)

    Braun, A.; Irwin, K.; Beaulne, D.; Fotopoulos, G.; Lougheed, S. C.

    2016-12-01

    Each remote sensing technique has its unique set of strengths and weaknesses, but by combining techniques the classification accuracy can be increased. The goal of this project is to underline the strengths and weaknesses of Synthetic Aperture Radar (SAR), LiDAR and optical imagery data and highlight the opportunities where integration of the three data types can increase the accuracy of identifying water in a principally natural landscape. The study area is located at the Queen's University Biological Station, Ontario, Canada. TerraSAR-X (TSX) data was acquired between April and July 2016, consisting of four single polarization (HH) staring spotlight mode backscatter intensity images. Grey-level thresholding is used to extract surface water bodies, before identifying and masking zones of radar shadow and layover by using LiDAR elevation models to estimate the canopy height and applying simple geometry algorithms. The airborne LiDAR survey was conducted in June 2014, resulting in a discrete return dataset with a density of 1 point/m2. Radiometric calibration to correct for range and incidence angle is applied, before classifying the points as water or land based on corrected intensity, elevation, roughness, and intensity density. Panchromatic and multispectral (4-band) imagery from Quickbird was collected in September 2005 at spatial resolutions of 0.6m and 2.5m respectively. Pixel-based classification is applied to identify and distinguish water bodies from land. A classification system which inputs SAR-, LiDAR- and optically-derived water presence models in raster formats is developed to exploit the strengths and weaknesses of each technique. The total percentage of water detected in the sample area for SAR backscatter, LiDAR intensity, and optical imagery was 27%, 19% and 18% respectively. The output matrix of the classification system indicates that in over 72% of the study area all three methods agree on the classification. Analysis was specifically targeted

  8. Cross-polarization borehole radar system with a RF analog optical transmission link. Hikaridenso ni yoru chokko henpa bore hole radar keisoku system

    Energy Technology Data Exchange (ETDEWEB)

    Miwa, T.; Sato, M.; Niitsuma, H. (Tohoku University, Sendai (Japan). Faculty of Engineering)

    1994-05-01

    The cross-polarization borehole radar system (BRS) was reported. The RF analogue optical transmission system (using the optical fiber cable) was introduced into the signal transmission between the sonde and the surface station to broaden the band and to heighten the S/N ratio. The sonde consisted of cable head (to transmit the trigger signal), receiving antenna, and transmitting antenna. The transmitting antenna was excited by the trigger signal from the surface to generate the pulse by the pulse generator. The signal received by the receiving antenna was sent to the oscilloscope on the surface. The field test of cross-polarization borehole system revealed that the effect of noise associated with the BRS employing the eccentric cable did not appear on the BRS. Examples of field test of the cross-polarization borehole measurement system employing the BRS were described. 4 refs., 8 figs., 1 tab.

  9. Synergism of optical and radar data for forest structure and biomass / Sinergismo entre dados ópticos e de radar da estrutura da floresta e biomassa

    Directory of Open Access Journals (Sweden)

    Sassan S. Saatchi

    2010-10-01

    Full Text Available AbstractThe structure of forests, the three-dimensional arrangement of individual trees, has a profound effect on how ecosystems function and carbon cycle, water and nutrients. Repeated optical satellite observations of vegetation patterns in two-dimensions have made significant contributions to our understanding of the state and dynamics of the global biosphere. Recent advances in Remote Sensing technology allow us to view the biosphere in three-dimensions and provide us with refined measurements of horizontal as well as vertical structure of forests. This paper provides an overview of the recent advances in fusion of optical and radar imagery in assessing terrestrial ecosystem structure and aboveground biomass. In particular, the paper will focus on radar and LIDAR sensors from recent and planned spaceborne missions and provide theoretical and practical applications of the measurements. Finally, the relevance of these measurements for reducing the uncertainties of terrestrial carbon cycle and the response of ecosystems to future climate will be discussed in details. ResumoA estrutura de florestas, o arranjo tridimensional de árvores individuais, tem um efeito profundo sobre o funcionamento dos ecossistemas e do ciclo do carbono, água e nutrientes. Repetidas observações de satélite óptico de padrões de vegetação em duas dimensões trouxeram contribuições significativas para a nossa compreensão do estado e da dinâmica da biosfera global. Recentes avanços na tecnologia de Sensoriamento Remoto nos permitem ver a biosfera em três dimensões e nos fornecer medições apuradas da estrutura horizontal, bem como a vertical das florestas. Esse artigo fornece uma visão geral dos recentes avanços na fusão de imagens ópticas e de radar para avaliar a estrutura do ecossistema terrestre e biomassa. Em particular, o trabalho concentra-se em sensores radar e LIDAR de recentes missões espaciais planejadas e fornece aplicações teóricas e

  10. VALIDATION OF SPACEBORNE RADAR SURFACE WATER MAPPING WITH OPTICAL sUAS IMAGES

    Directory of Open Access Journals (Sweden)

    J. Li-Chee-Ming

    2015-08-01

    Full Text Available The Canada Centre for Remote Sensing (CCRS has over 40 years of experience with airborne and spaceborne sensors and is now starting to use small Unmanned Aerial Systems (sUAS to validate products from large coverage area sensors and create new methodologies for very high resolution products. Wetlands have several functions including water storage and retention which can reduce flooding and provide continuous flow for hydroelectric generation and irrigation for agriculture. Synthetic Aperture Radar is well suited as a tool for monitoring surface water by supplying acquisitions irrespective of cloud cover or time of day. Wetlands can be subdivided into three classes: open water, flooded vegetation and upland which can vary seasonally with time and water level changes. RADARSAT‐2 data from the Wide-Ultra Fine, Spotlight and Fine Quad-Pol modes has been used to map the open water in the Peace‐Athabasca Delta, Alberta using intensity thresholding. We also use spotlight modes for higher resolution and the fully polarimetric mode (FQ for polarimetric decomposition. Validation of these products will be done using a low altitude flying sUAS to generate optical georeferenced images. This project provides methodologies which could be used for flood mapping as well as ecological monitoring.

  11. Forecast of wheat yield throughout the agricultural season using optical and radar satellite images

    Science.gov (United States)

    Fieuzal, R.; Baup, F.

    2017-07-01

    The aim of this study is to estimate the capabilities of forecasting the yield of wheat using an artificial neural network combined with multi-temporal satellite data acquired at high spatial resolution throughout the agricultural season in the optical and/or microwave domains. Reflectance (acquired by Formosat-2, and Spot 4-5 in the green, red, and near infrared wavelength) and multi-configuration backscattering coefficients (acquired by TerraSAR-X and Radarsat-2 in the X- and C-bands, at co- (abbreviated HH and VV) and cross-polarization states (abbreviated HV and VH)) constitute the input variable of the artificial neural networks, which are trained and validated on the successively acquired images, providing yield forecast in near real-time conditions. The study is based on data collected over 32 fields of wheat distributed over a study area located in southwestern France, near Toulouse. Among the tested sensor configurations, several satellite data appear useful for the yield forecasting throughout the agricultural season (showing coefficient of determination (R2) larger than 0.60 and a root mean square error (RMSE) lower than 9.1 quintals by hectare (q ha-1)): CVH, CHV, or the combined used of XHH and CHH, CHH and CHV, or green reflectance and CHH. Nevertheless, the best accurate forecast (R2 = 0.76 and RMSE = 7.0 q ha-1) is obtained longtime before the harvest (on day 98, during the elongation of stems) using the combination of co- and cross-polarized backscattering coefficients acquired in the C-band (CVV and CVH). These results highlight the high interest of using synthetic aperture radar (SAR) data instead of optical ones to early forecast the yield before the harvest of wheat.

  12. Imaging internal flows in a drying sessile polymer dispersion drop using Spectral Radar Optical Coherence Tomography (SR-OCT).

    Science.gov (United States)

    Manukyan, Selin; Sauer, Hans M; Roisman, Ilia V; Baldwin, Kyle A; Fairhurst, David J; Liang, Haida; Venzmer, Joachim; Tropea, Cameron

    2013-04-01

    In this work, we present the visualization of the internal flows in a drying sessile polymer dispersion drop on hydrophilic and hydrophobic surfaces with Spectral Radar Optical Coherence Tomography (SR-OCT). We have found that surface features such as the initial contact angle and pinning of the contact line, play a crucial role on the flow direction and final shape of the dried drop. Moreover, imaging through selection of vertical slices using optical coherence tomography offers a feasible alternative compared to imaging through selection of narrow horizontal slices using confocal microscopy for turbid, barely transparent fluids.

  13. Air-quality monitoring by optical and acoustic radars at Pune, India

    Science.gov (United States)

    Devara, P. C. S.; Maheskumar, R. S.; Murthy, B. S.; Vernekar, K. G.

    1997-10-01

    The co-located optical (argon-ion lidar) and acoustic (Doppler sodar) radar systems at the Indian Institute of Tropical Meteorology (IITM), Pune (0957-0233/8/10/019/img1, 0957-0233/8/10/019/img2, 559 m AMSL), India, have been employed to study the nocturnal aerosol pollution dynamics or air quality. Both the systems have been operated simultaneously in order to sample the common atmospheric volume. The results of the experiments thus conducted on some typical nights are presented in this paper. The time - height cross section of the mean, horizontal and vertical components of the wind field derived from the sodar observations indicate that the wind is either easterly or northerly with its vertical component negative (downdraft) for most of the observational period. The interesting feature is that the winds are either calm or relatively weaker in the night-time boundary layer compared with those in the region aloft. This is more evident in the north - south direction in which the lidar and sodar equipment are located. Furthermore, the regions where stable/elevated layer formation is active are found to be associated with the smallest wind gradients, leading to accumulation of aerosol particles or larger temperature structure parameters. The time evolution of the mixed-layer heights and the associated ventilation coefficients, determined from the combined lidar - aerosol and sodar - wind observations, are found to be useful to explain the transport and diffusion of pollutants across the elevated temperature inversions over the experimental station. The details of the experimental techniques are presented and their value for application in the study of regional air quality and pollution potential is discussed.

  14. Comparison of high-latitude thermospheric meridionalwinds I: optical and radar experimental comparisons

    Directory of Open Access Journals (Sweden)

    E. M. Griffin

    2004-03-01

    Full Text Available Thermospheric neutral winds at Kiruna, Sweden (67.4°N, 20.4°E are compared using both direct optical Fabry-Perot Interferometer (FPI measurements and those derived from European incoherent scatter radar (EISCAT measurements. This combination of experimental data sets, both covering well over a solar cycle of data, allows for a unique comparison of the thermospheric meridional component of the neutral wind as observed by different experimental techniques. Uniquely in this study the EISCAT measurements are used to provide winds for comparison using two separate techniques: the most popular method based on the work of Salah and Holt (1974 and the Meridional Wind Model (MWM (Miller et al., 1997 application of servo theory. The balance of forces at this location that produces the observed diurnal pattern are investigated using output from the Coupled Thermosphere and Ionosphere (CTIM numerical model. Along with detailed comparisons from short periods the climatological behaviour of the winds have been investigated for seasonal and solar cycle dependence using the experimental techniques. While there are features which are consistent between the 3 techniques, such as the evidence of the equinoctial asymmetry, there are also significant differences between the techniques both in terms of trends and absolute values. It is clear from this and previous studies that the high-latitude representation of the thermospheric neutral winds from the empirical Horizontal Wind Model (HWM, though improved from earlier versions, lacks accuracy in many conditions. The relative merits of each technique are discussed and while none of the techniques provides the perfect data set to address model performance at high-latitude, one or more needs to be included in future HWM reformulations.

    Key words. Meteorology and atmospheric dynamics (thermospheric dynamics, Ionosphere (ionosphere-atmosphere interactions, auroral ionosphere

  15. Comparison of high-latitude thermospheric meridional winds I: optical and radar experimental comparisons

    Energy Technology Data Exchange (ETDEWEB)

    Griffin, E.M.; Mueller-Wodarg, I.C.F.; Aruliah, A.; Aylward, A. [Atmospheric Physics Lab., Univ. Coll. London, London (United Kingdom)

    2004-07-01

    Thermospheric neutral winds at Kiruna, Sweden (67.4 N, 20.4 E) are compared using both direct optical fabry-perot interferometer (FPI) measurements and those derived from European incoherent scatter radar (EISCAT) measurements. This combination of experimental data sets, both covering well over a solar cycle of data, allows for a unique comparison of the thermospheric meridional component of the neutral wind as observed by different experimental techniques. Uniquely in this study the EISCAT measurements are used to provide winds for comparison using two separate techniques: the most popular method based on the work of Salah and Holt (1974) and the meridional wind model (MWM) (Miller et al., 1997) application of servo theory. The balance of forces at this location that produces the observed diurnal pattern are investigated using output from the coupled thermosphere and ionosphere (CTIM) numerical model. Along with detailed comparisons from short periods the climatological behaviour of the winds have been investigated for seasonal and solar cycle dependence using the experimental techniques. While there are features which are consistent between the 3 techniques, such as the evidence of the equinoctial asymmetry, there are also significant differences between the techniques both in terms of trends and absolute values. It is clear from this and previous studies that the high-latitude representation of the thermospheric neutral winds from the empirical horizontal wind model (HWM), though improved from earlier versions, lacks accuracy in many conditions. The relative merits of each technique are discussed and while none of the techniques provides the perfect data set to address model performance at high-latitude, one or more needs to be included in future HWM reformulations. (orig.)

  16. Coherent Laser Radar Metrology System for Large Scale Optical Systems Project

    Data.gov (United States)

    National Aeronautics and Space Administration — A new type of laser radar metrology inspection system is proposed that incorporates a novel, dual laser coherent detection scheme capable of eliminating both...

  17. Coherent Laser Radar Metrology System for Large Scale Optical Systems Project

    Data.gov (United States)

    National Aeronautics and Space Administration — A new type of laser radar metrology inspection system is proposed that incorporates a novel, dual laser coherent detection scheme capable of eliminating both...

  18. Characterization of VHF radar observations associated with equatorial Spread F by narrow-band optical measurements

    Directory of Open Access Journals (Sweden)

    R. Sekar

    2004-09-01

    Full Text Available The VHF radars have been extensively used to investigate the structures and dynamics of equatorial Spread F (ESF irregularities. However, unambiguous identification of the nature of the structures in terms of plasma depletion or enhancement requires another technique, as the return echo measured by VHF radar is proportional to the square of the electron density fluctuations. In order to address this issue, co-ordinated radar backscatter and thermospheric airglow intensity measurements were carried out during March 2003 from the MST radar site at Gadanki. Temporal variations of 630.0-nm and 777.4-nm emission intensities reveal small-scale ("micro" and large-scale ("macro" variations during the period of observation. The micro variations are absent on non-ESF nights while the macro variations are present on both ESF and non-ESF nights. In addition to the well-known anti-correlation between the base height of the F-region and the nocturnal variation of thermospheric airglow intensities, the variation of the base height of the F-layer, on occasion, is found to manifest as a bottomside wave-like structure, as seen by VHF radar on an ESF night. The micro variations in the airglow intensities are associated with large-scale irregular plasma structures and found to be in correspondence with the "plume" structures obtained by VHF radar. In addition to the commonly observed depletions with upward movement, the observation unequivocally reveals the presence of plasma enhancements which move downwards. The observation of enhancement in 777.4-nm airglow intensity, which is characterized as plasma enhancement, provides an experimental verification of the earlier prediction based on numerical modeling studies.

  19. Optical and Radar Satellite Remote Sensing for Large Area Analysis of Landslide Activity in Southern Kyrgyzstan, Central Asia

    Science.gov (United States)

    Roessner, S.; Behling, R.; Teshebaeva, K. O.; Motagh, M.; Wetzel, H. U.

    2014-12-01

    The presented work has been investigating the potential of optical and radar satellite remote sensing for the spatio-temporal analysis of landslide activity at a regional scale along the eastern rim of the Fergana Basin representing the area of highest landslide activity in Kyrgyzstan. For this purpose a multi-temporal satellite remote sensing database has been established for a 12.000 km2 study area in Southern Kyrgyzstan containing a multitude of optical data acquired during the last 28 years as well as TerraSAR-X and ALOS-PALSAR acquired since 2007. The optical data have been mainly used for creating a multi-temporal inventory of backdated landslide activity. For this purpose an automated approach for object-oriented multi-temporal landslide detection has been developed which is based on the analysis of temporal NDVI-trajectories complemented by relief information to separate landslide-related surface changes from other land cover changes. Applying the approach to the whole study area using temporal high resolution RapidEye time series data has resulted in the automated detection of 612 landslide objects covering a total area of approx. 7.3 km². Currently, the approach is extended to the whole multi-sensor time-series database for systematic analysis of longer-term landslide occurrence at a regional scale. Radar remote sensing has been focussing on SAR Interferometry (InSAR) to detect landslide related surface deformation. InSAR data were processed by repeat-pass interferometry using the DORIS and SARScape software. To better assess ground deformation related to individual landslide objects, InSAR time-series analysis has been applied using the Small Baseline Subset (SBAS) method. Analysis of the results in combination with optical data and DEM information has revealed that most of the derived deformations are caused by slow movements in areas of already existing landslides indicating the reactivation of older slope failures. This way, InSAR analysis can

  20. Parameters of optical signals registered with the AZT-33IK telescope in active Radar-Progress space experiment

    Science.gov (United States)

    Eselevich, Maksim; Khakhinov, Vitaliy; Klunko, Evgeniy

    2016-09-01

    Images of Progress cargo spacecraft (PCS) and areas around them were captured by the AZT-33IK optical telescope (Sayan Observatory of ISTP SB RAS) during sessions of the active Radar-Progress space experiment. We took images of exhaust and fuel jets when propulsion systems worked and after they were cut off, during fuel system purging. In different sessions of the experiment, PCS had different orientations relative to the telescope, thus allowing us to find some parameters of the observed phenomena. These parameters make it possible to determine instants of engine ignitions, to estimate velocities of the jets, and, if necessary, to control the geometry of the space experiment. The paper reports common features of optical signals from jets measured in these experiments.

  1. Integration of Optical and X-Band Radar Data for Pasture Biomass Estimation in an Open Savannah Woodland

    Directory of Open Access Journals (Sweden)

    Michael Schmidt

    2016-12-01

    Full Text Available Pasture biomass is an important quantity globally in livestock industries, carbon balances, and bushfire management. Quantitative estimates of pasture biomass or total standing dry matter (TSDM at the field scale are much desired by land managers for land-resource management, forage budgeting, and conservation purposes. Estimates from optical satellite imagery alone tend to saturate in the cover-to-mass relationship and fail to differentiate standing dry matter from litter. X-band radar imagery was added to complement optical imagery with a structural component to improve TSDM estimates in rangelands. High quality paddock-scale field data from a northeastern Australian cattle grazing trial were used to establish a statistical TSDM model by integrating optical satellite image data from the Landsat sensor with observations from the TerraSAR-X (TSX radar satellite. Data from the dry season of 2014 and the wet season of 2015 resulted in models with adjusted r2 of 0.81 in the dry season and 0.74 in the wet season. The respective models had a mean standard error of 332 kg/ha and 240 kg/ha. The wet and dry season conditions were different, largely due to changed overstorey vegetation conditions, but not greatly in a pasture ‘growth’ sense. A more robust combined-season model was established with an adjusted r2 of 0.76 and a mean standard error of 358 kg/ha. A clear improvement in the model performance could be demonstrated when integrating HH polarised TSX imagery with optical satellite image products.

  2. Generation of a Combined Dataset of Simulated Radar and Electro-Optical Imagery

    Science.gov (United States)

    2005-10-05

    DISTRIBUTION/AVAILABILITY STATEMENT Approved for public release, distribution unlimited 13. SUPPLEMENTARY NOTES The original document contains color ...help alleviate display issues in ENVI, which tries to stretch the RGB display colors to a minimum and maximum that it arbitrarily chooses. By adding a...DIRSIG User’s Manual Release 3.6, Digital Imaging and Remote Sensing Laboratory, RIT, 2004. DPI Website, http://www.dpi.inpe.br/spring/ teoria /radar

  3. Rankin Inlet PolarDARN radar observations of duskward moving Sun-aligned optical forms

    Directory of Open Access Journals (Sweden)

    A. Koustov

    2008-09-01

    Full Text Available On 15 February 2007, several duskward moving sun-aligned (SA auroral forms have been observed by the all-sky camera at Resolute Bay, Nunavut (Canada. Concurrent observations with the Rankin Inlet (RANK PolarDARN HF radar within the field-of-view of the camera showed signatures of moving auroral forms in all signal parameters with the most remarkable effects being the echo power drop and velocity reversal as the arc reached a specific radar beam/gate. Spatial and temporal variations of the velocity in the vicinity of the SA form are investigated. It is shown that the form-associated convection reversal was located poleward (duskward of the global-scale convection reversal associated with the dawn cell of the large-scale convection pattern. Thus, the RANK radar was monitoring the polar cap portion of the global-scale convection pattern and its transition from the IMF By<0 to the By>0 situation. Magnetic perturbations associated with the SA form passing the zenith of several magnetometers are investigated. It is shown that although magnetometer signatures of the moving form were clear, the convection pattern derivation from magnetometer records alone is not straightforward.

  4. Meteor fluxes and visual magnitudes from EISCAT radar event rates: a comparison with cross-section based magnitude estimates and optical data

    Directory of Open Access Journals (Sweden)

    A. Pellinen-Wannberg

    Full Text Available Incoherent scatter radars (ISR are versatile instruments for continuous monitoring of ionisation processes in the Earth's atmosphere. EISCAT, The European Incoherent Scatter facility has proven effective also in meteor studies. The time resolution of the radar can be reduced to a few milliseconds, sufficient to resolve the passage of individual meteors through the narrow ISR beam. Methods for group and phase velocity determination of the meteoroids and the discrepancy between the results related to the target behaviour are presented. The radar cross sections of echoes associated with moving meteoroids ("meteor head echoes" are very small and increase with decreasing wavelength. The parent meteoroids are found to have visual magnitudes far below the detection limit of most optical observations. The equivalent visual magnitude limit of the smallest objects observed by EISCAT in the current experiments has been estimated by two different methods, both from the cross-section measurements and from the measured event rates. Both methods give a limit value of +10 for the smallest objects while the upper limit is +4. The lower limit of the visual magnitude for the collocated optical measurement system is +4. Thus the two detection systems observe two different meteor size ranges, with the radar almost reaching micrometeorite population. Meteor fluxes estimated from the event rates and the radar system parameters agree well with previous extrapolated values for this size range.

    Key words. Ionosphere (ionization mechanisms. Radio science (ionospheric physics. Space plasma physics (ionization processes

  5. Application of Multifractal Analysis to Segmentation of Water Bodies in Optical and Synthetic Aperture Radar Satellite Images

    CERN Document Server

    Martin, Victor Manuel San

    2016-01-01

    A method for segmenting water bodies in optical and synthetic aperture radar (SAR) satellite images is proposed. It makes use of the textural features of the different regions in the image for segmentation. The method consists in a multiscale analysis of the images, which allows us to study the images regularity both, locally and globally. As results of the analysis, coarse multifractal spectra of studied images and a group of images that associates each position (pixel) with its corresponding value of local regularity (or singularity) spectrum are obtained. Thresholds are then applied to the multifractal spectra of the images for the classification. These thresholds are selected after studying the characteristics of the spectra under the assumption that water bodies have larger local regularity than other soil types. Classifications obtained by the multifractal method are compared quantitatively with those obtained by neural networks trained to classify the pixels of the images in covered against uncovered b...

  6. Broadband millimeter-wave electro-optic modulator using multi-patch antennas for pico-cell radar networks

    Science.gov (United States)

    Wijayanto, Yusuf Nur; Kanno, Atsushi; Kawanishi, Tetsuya

    2015-01-01

    An electro-optic (EO) modulator using multi patch antennas is proposed for broadband millimeter-wave bands in pico-cell radar networks. The proposed device is composed of multi patch antennas with a gap fabricated on a LiNbO3 crystal bonded with a low-k dielectric material. Multiple millimeter-wave operational frequencies can be received by the multi patch antennas and converting directly to lightwave signals through the Pockel effects of the LiNbO3 crystal. By adjusting the metal patch size for receiving with relatively close millimeter-wave frequencies, the bandwidth of the EO modulator can be enlarged. Based on that, bandwidth of over 30% in millimeter-wave bands can be achieved using the proposed device.

  7. Aspects of Radar Polarimetry

    OpenAIRE

    Lüneburg, Ernst

    2002-01-01

    This contribution is a tutorial introduction to the phenomenological theory of radar polarimetry for the coherent scatter case emphasizing monostatic backscattering and forward scattering (transmission). Characteristic similarities and differences between radar polarimetry and optical polarimetry and the role of linear and antilinear operators (time-reversal) are pointed out and typical polarimetric invariants are identified.

  8. The 2007-8 volcanic eruption on Jebel at Tair island (Red Sea) observed by satellite radar and optical images

    KAUST Repository

    Xu, Wenbin

    2014-01-31

    We use high-resolution optical images and Interferometric Synthetic Aperture Radar (InSAR) data to study the September 2007-January 2008 Jebel at Tair eruption. Comparison of pre- and post-eruption optical images reveals several fresh ground fissures, a new scoria cone near the summit, and that 5.9 ± 0.1 km2 of new lava covered about half of the island. Decorrelation in the InSAR images indicates that lava flowed both to the western and to the northeastern part of the island after the start of the eruption, while later lavas were mainly deposited near the summit and onto the north flank of the volcano. From the InSAR data, we also estimate that the average thickness of the lava flows is 3.8 m, resulting in a bulk volume of around 2.2 × 107 m3. We observe no volcano-wide pre- or post-eruption uplift, which suggests that the magma source may be deep. The co-eruption interferograms, on the other hand, reveal local and rather complex deformation. We use these observations to constrain a tensile dislocation model that represents the dike intrusion that fed the eruption. The model results show that the orientation of the dike is perpendicular to the Red Sea rift, implying that the local stresses within the volcanic edifice are decoupled from the regional stress field. © 2014 Springer-Verlag Berlin Heidelberg.

  9. Avalanche Debris Detection Using Satellite- and Drone Based Radar and Optical Remote Sensing

    Science.gov (United States)

    Eckerstorfer, M.; Malnes, E.; Vickers, H.; Solbø, S. A.; Tøllefsen, A.

    2014-12-01

    The mountainous fjord landscape in the county of Troms, around its capital Tromsø in Northern Norway is prone to high avalanche activity during the snow season. Large avalanches pose a hazard to infrastructure, such as buildings and roads, located between the steep mountainsides and the fjords. A prolonged cold spell during January and February 2014 was followed by rapid new-snow loading during March 2014, inducing a significant avalanche cycle with many spontaneous, size D4 avalanches that affected major transport veins. During and shortly after the avalanche cycle of March 2014, we obtained 11 Radarsat-2 Ultrafine mode scenes, chosen according to reported avalanche activity. We further collected four Radarsat-2 ScanSAR mode scenes and two Landsat-8 scenes covering the entire county of Troms. For one particular avalanche, we obtained a drone-based orthophoto, from which a DEM of the avalanche debris surface was derived, using structure-from-motion photogrammetry. This enabled us to calculate the debris volume accurately. We detected avalanche debris in the radar images visually, by applying two detection algorithms that make use of the increased backscatter in avalanche debris. This backscatter increase is a product of increased snow water equivalent and surface roughness, roughly of the order of 3 dB. In addition, we applied a multi-temporal approach by repeatedly detecting avalanche debris at different acquisition times, as well as a multi-sensor approach, covering similar areas with different sensors. This multi-temporal and multi-sensor approach enabled us to map the spatial extent and magnitude of the March 2014 avalanche cycle in the county Troms. With ESA's Sentinel-1 satellite, providing high-resolution, large swath radar images with a short repeat cycle, a complete avalanche record for a forecasting region could become feasible. In this first test season, we detected more than 550 avalanches that were released during a one-month period over an area of

  10. The Mass Index and Total Mass of the Geminid Meteoroid Stream as Found with Radar, Optical, and Lunar Impact Data

    Science.gov (United States)

    Blaauw, R.

    2016-01-01

    The Geminid meteor shower was observed in 2015 using the Western Meteor Physics Group’s Canadian Meteor Orbit Radar (CMOR), Marshall Space Flight Center’s (MSFC) eight wide-field optical cameras, and MSFC’s lunar impact monitoring. These observations allowed Geminid fluxes to be calculated in three unique mass-ranges, from 1.8 (exponent -4) grams to 30 grams. From these fluxes, a mass index of 1.68 plus or minus 0.04 is found, which is in excellent agreement with past Geminid mass indices such as 1.69 found by Blaauw et al using only radar data and 1.7 found by Arlt and Rendtel using visual data. This mass index, however, is found over five orders of magnitude of mass, which allows a higher level of confidence that this mass index holds over a large portion of the stream. Mass indices are an important quantity to be accurately measured for a shower, indicating the distribution of mass in a well-studied stream in which we know the parent body (3200 Phaethon), improving forecasts of the shower activity, and allow fluxes to be scaled to high and low masses. The quantities derived here, along with a profile of the Geminid meteor shower activity in 2015 from CMOR, permit the total Geminid mass the Earth encountered in 2015 to be found, along with a minimum total mass of the Geminid meteoroid stream. Attempts have been made in the past to measure the mass of meteoroid streams using Zenithal Hourly Rate (ZHR) profiles, but here this new and improved treatment uses empirically derived fluxes and measured mass indices for the 2015 encounter with the meteoroid stream. This is to be compared with other meteoroid stream mass estimates including that of the Perseids, caused by comet Swift Tuttle.

  11. Mapping forested wetlands in the Great Zhan River Basin through integrating optical, radar, and topographical data classification techniques.

    Science.gov (United States)

    Na, X D; Zang, S Y; Wu, C S; Li, W L

    2015-11-01

    Knowledge of the spatial extent of forested wetlands is essential to many studies including wetland functioning assessment, greenhouse gas flux estimation, and wildlife suitable habitat identification. For discriminating forested wetlands from their adjacent land cover types, researchers have resorted to image analysis techniques applied to numerous remotely sensed data. While with some success, there is still no consensus on the optimal approaches for mapping forested wetlands. To address this problem, we examined two machine learning approaches, random forest (RF) and K-nearest neighbor (KNN) algorithms, and applied these two approaches to the framework of pixel-based and object-based classifications. The RF and KNN algorithms were constructed using predictors derived from Landsat 8 imagery, Radarsat-2 advanced synthetic aperture radar (SAR), and topographical indices. The results show that the objected-based classifications performed better than per-pixel classifications using the same algorithm (RF) in terms of overall accuracy and the difference of their kappa coefficients are statistically significant (pclassifications using the RF algorithm. As for the object-based image analysis, there were also statistically significant differences (palgorithms. The object-based classification using RF provided a more visually adequate distribution of interested land cover types, while the object classifications based on the KNN algorithm showed noticeably commissions for forested wetlands and omissions for agriculture land. This research proves that the object-based classification with RF using optical, radar, and topographical data improved the mapping accuracy of land covers and provided a feasible approach to discriminate the forested wetlands from the other land cover types in forestry area.

  12. Radar detection of a localized 1.4 Hz pulsation in auroral plasma, simultaneous with pulsating optical emissions, during a substorm

    Directory of Open Access Journals (Sweden)

    R. Cosgrove

    2010-10-01

    Full Text Available Many pulsating phenomena are associated with the auroral substorm. It has been considered that some of these phenomena involve kilometer-scale Alfvén waves coupling the magnetosphere and ionosphere. Electric field oscillations at the altitude of the ionosphere are a signature of such wave activity that could distinguish it from other sources of auroral particle precipitation, which may be simply tracers of magnetospheric activity. Therefore, a ground based diagnostic of kilometer-scale oscillating electric fields would be a valuable tool in the study of pulsations and the auroral substorm. In this study we attempt to develop such a tool in the Poker Flat incoherent scatter radar (PFISR. The central result is a statistically significant detection of a 1.4 Hz electric field oscillation associated with a similar oscillating optical emission, during the recovery phase of a substorm. The optical emissions also contain a bright, lower frequency (0.2 Hz pulsation that does not show up in the radar backscatter. The fact that higher frequency oscillations are detected by the radar, whereas the bright, lower frequency optical pulsation is not detected by the radar, serves to strengthen a theoretical argument that the radar is sensitive to oscillating electric fields, but not to oscillating particle precipitation. Although it is difficult to make conclusions as to the physical mechanism, we do not find evidence for a plane-wave-like Alfvén wave; the detected structure is evident in only two of five adjacent beams. We emphasize that this is a new application for ISR, and that corroborating results are needed.

  13. Techniques for Effective Optical Noise Rejection in Amplitude-Modulated Laser Optical Radars for Underwater Three-Dimensional Imaging

    Directory of Open Access Journals (Sweden)

    Francucci M

    2010-01-01

    Full Text Available Amplitude-modulated (AM laser imaging is a promising technology for the production of accurate three-dimensional (3D images of submerged scenes. The main challenge is that radiation scattered off water gives rise to a disturbing signal (optical noise that degrades more and more the quality of 3D images for increasing turbidity. In this paper, we summarize a series of theoretical findings, that provide valuable hints for the development of experimental methods enabling a partial rejection of optical noise in underwater imaging systems. In order to assess the effectiveness of these methods, which range from modulation/demodulation to polarimetry, we carried out a series of experiments by using the laboratory prototype of an AM 3D imager ( = 405 nm for marine archaeology surveys, in course of realization at the ENEA Artificial Vision Laboratory (Frascati, Rome. The obtained results confirm the validity of the proposed methods for optical noise rejection.

  14. Techniques for Effective Optical Noise Rejection in Amplitude-Modulated Laser Optical Radars for Underwater Three-Dimensional Imaging

    Directory of Open Access Journals (Sweden)

    R. Ricci

    2010-01-01

    Full Text Available Amplitude-modulated (AM laser imaging is a promising technology for the production of accurate three-dimensional (3D images of submerged scenes. The main challenge is that radiation scattered off water gives rise to a disturbing signal (optical noise that degrades more and more the quality of 3D images for increasing turbidity. In this paper, we summarize a series of theoretical findings, that provide valuable hints for the development of experimental methods enabling a partial rejection of optical noise in underwater imaging systems. In order to assess the effectiveness of these methods, which range from modulation/demodulation to polarimetry, we carried out a series of experiments by using the laboratory prototype of an AM 3D imager (λ = 405 nm for marine archaeology surveys, in course of realization at the ENEA Artificial Vision Laboratory (Frascati, Rome. The obtained results confirm the validity of the proposed methods for optical noise rejection.

  15. Cereal Yield Modeling in Finland Using Optical and Radar Remote Sensing

    Directory of Open Access Journals (Sweden)

    Jouko Kleemola

    2010-09-01

    Full Text Available During 1996–2006, the Ministry of Agriculture and Forestry in Finland (MAFF, MTT Agrifood Research and the Finnish Geodetic Institute performed a joint remote sensing satellite research project. It evaluated the applicability of optical satellite (Landsat, SPOT data for cereal yield estimations in the annual crop inventory program. Four Optical Vegetation Indices models (I: Infrared polynomial, II: NDVI, III: GEMI, IV: PARND/FAPAR were validated to estimate cereal baseline yield levels (yb using solely optical harmonized satellite data (Optical Minimum Dataset. The optimized Model II (NDVI yb level was 4,240 kg/ha (R2 0.73, RMSE 297 kg/ha for wheat and 4390 kg/ha (R2 0.61, RMSE 449 kg/ha for barley and Model I yb was 3,480 kg/ha for oats (R2 0.76, RMSE 258 kg/ha. Optical VGI yield estimates were validated with CropWatN crop model yield estimates using SPOT and NOAA data (mean R2 0.71, RMSE 436 kg/ha and with composite SAR/ASAR and NDVI models (mean R2 0.61, RMSE 402 kg/ha using both reflectance and backscattering data. CropWatN and Composite SAR/ASAR & NDVI model mean yields were 4,754/4,170 kg/ha for wheat, 4,192/3,848 kg/ha for barley and 4,992/2,935 kg/ha for oats.

  16. Radar illusion via metamaterials

    Science.gov (United States)

    Jiang, Wei Xiang; Cui, Tie Jun

    2011-02-01

    An optical illusion is an image of a real target perceived by the eye that is deceptive or misleading due to a physiological illusion or a specific visual trick. The recently developed metamaterials provide efficient approaches to generate a perfect optical illusion. However, all existing research on metamaterial illusions has been limited to theory and numerical simulations. Here, we propose the concept of a radar illusion, which can make the electromagnetic (EM) image of a target gathered by radar look like a different target, and we realize a radar illusion device experimentally to change the radar image of a metallic target into a dielectric target with predesigned size and material parameters. It is well known that the radar signatures of metallic and dielectric objects are significantly different. However, when a metallic target is enclosed by the proposed illusion device, its EM scattering characteristics will be identical to that of a predesigned dielectric object under the illumination of radar waves. Such an illusion device will confuse the radar, and hence the real EM properties of the metallic target cannot be perceived. We designed and fabricated the radar illusion device using artificial metamaterials in the microwave frequency, and good illusion performances are observed in the experimental results.

  17. Use of high resolution optical and radar imagery for intelligence and situational awareness in urban areas

    NARCIS (Netherlands)

    Broek, A.C. van den; Dekker, R.J.; Gutjahr, K.; Raggam, H.

    2007-01-01

    We have used high resolution optical satellite stereo data to generate a digital surface model containing building heights, so that 3-dimensional information is available for the purpose of urban situational awareness. In addition we have applied change detection techniques to Radarsat fine beam ima

  18. A Review of the Application of Optical and Radar Remote Sensing Data Fusion to Land Use Mapping and Monitoring

    Directory of Open Access Journals (Sweden)

    Neha Joshi

    2016-01-01

    Full Text Available The wealth of complementary data available from remote sensing missions can hugely aid efforts towards accurately determining land use and quantifying subtle changes in land use management or intensity. This study reviewed 112 studies on fusing optical and radar data, which offer unique spectral and structural information, for land cover and use assessments. Contrary to our expectations, only 50 studies specifically addressed land use, and five assessed land use changes, while the majority addressed land cover. The advantages of fusion for land use analysis were assessed in 32 studies, and a large majority (28 studies concluded that fusion improved results compared to using single data sources. Study sites were small, frequently 300–3000 km 2 or individual plots, with a lack of comparison of results and accuracies across sites. Although a variety of fusion techniques were used, pre-classification fusion followed by pixel-level inputs in traditional classification algorithms (e.g., Gaussian maximum likelihood classification was common, but often without a concrete rationale on the applicability of the method to the land use theme being studied. Progress in this field of research requires the development of robust techniques of fusion to map the intricacies of land uses and changes therein and systematic procedures to assess the benefits of fusion over larger spatial scales.

  19. The mass index and mass of the Geminid meteoroid stream as determined with radar, optical and lunar impact data

    Science.gov (United States)

    Blaauw, R. C.

    2017-09-01

    The Geminid meteor shower was observed in 2015 using the Western Meteor Physics Group's Canadian Meteor Orbit Radar (CMOR), Marshall Space Flight Center's (MSFC) eight wide-field optical cameras, and telescopes of MSFC's lunar impact monitoring program. These observations allowed Geminid fluxes to be calculated in three unique mass-ranges, from 1.8×10-4 g to 30 g. From these fluxes, a mass index of 1.68±0.04 was measured. The quantities derived here, along with a profile of the Geminid meteor shower activity in 2015 from CMOR, were used to find a total Geminid mass of 3.5×107 g the Earth encountered in 2015, along with a minimum total mass for the Geminid meteoroid stream of 1.6×1016 g. Attempts have been made in the past to measure the mass of meteoroid streams using ZHR profiles, but this new and improved treatment uses empirically derived fluxes and measured mass indices for the 2015 encounter with the meteoroid stream. These results are compared to meteoroid stream mass estimate measured for the Perseids of 3.3×1017 g. Instead of three flux values, a single flux value and an assumed mass index of 1.78 was used in Perseid analysis.

  20. Towards Quantitative Optical Cross Sections in Entomological Laser Radar - Potential of Temporal and Spherical Parameterizations for Identifying Atmospheric Fauna.

    Directory of Open Access Journals (Sweden)

    Mikkel Brydegaard

    Full Text Available In recent years, the field of remote sensing of birds and insects in the atmosphere (the aerial fauna has advanced considerably, and modern electro-optic methods now allow the assessment of the abundance and fluxes of pests and beneficials on a landscape scale. These techniques have the potential to significantly increase our understanding of, and ability to quantify and manage, the ecological environment. This paper presents a concept whereby laser radar observations of atmospheric fauna can be parameterized and table values for absolute cross sections can be catalogued to allow for the study of focal species such as disease vectors and pests. Wing-beat oscillations are parameterized with a discrete set of harmonics and the spherical scatter function is parameterized by a reduced set of symmetrical spherical harmonics. A first order spherical model for insect scatter is presented and supported experimentally, showing angular dependence of wing beat harmonic content. The presented method promises to give insights into the flight heading directions of species in the atmosphere and has the potential to shed light onto the km-range spread of pests and disease vectors.

  1. Ultra-compact optical true time delay device for wideband phased array radars.

    Energy Technology Data Exchange (ETDEWEB)

    Spahn, Olga Blum; Rabb, David J. (AFRL/RYJM, WPAFB, OH); Cowan, William D.; McCray, David L. (Ohio State University, Columbus, OH); Rowe, Delton, J. (Northrop Grumman Aerospace Systems, Redondo Beach, CA); Flannery, Martin R. (Northrop Grumman Aerospace Systems, Redondo Beach, CA); Yi, Allen Y. (Ohio State University, Columbus, OH); Ho, James G. (Northrop Grumman Aerospace Systems, Redondo Beach, CA); Anderson, Betty Lise (Ohio State University, Columbus, OH)

    2010-02-01

    An ultra-compact optical true time delay device is demonstrated that can support 112 antenna elements with better than six bits of delay in a volume 16-inch x 5-inch x 4-inch including the box and electronics. Free-space beams circulate in a White cell, overlapping in space to minimize volume. The 18 mirrors are slow-tool diamond turned on two substrates, one at each end, to streamline alignment. Pointing accuracy of better than 10 {micro}rad is achieved, with surface roughness {approx}45 nm rms. A MEMS tip-style mirror array selects among the paths for each beam independently, requiring {approx}100 {micro}s to switch the whole array. The micromirrors have 1.4{sup o} tip angle and three stable states (east, west, and flat). The input is a fiber-and-microlens array, whose output spots are re-imaged multiple times in the White cell, striking a different area of the single MEMS chip in each of 10 bounces. The output is converted to RF by an integrated InP wideband optical combiner detector array. Delays were accurate to within 4% (shortest delay) to 0.03% (longest mirror train). The fiber-to-detector insertion loss is 7.82 dB for the shortest delay path.

  2. Monitoring of land degradation from overgrazing using space-borne radar and optical imagery: a case study in Randi Forest, Cyprus

    Science.gov (United States)

    Papoutsa, C.; Kouhartsiouk, D.; Themistocleous, K.; Christoforou, M.; Hadjimitsis, D. G.

    2016-10-01

    This paper examines how radar and optical imagery combined can be employed for the study of land degradation. A case study was conducted in the Randi Forest, Cyprus, a known overgrazed area for the past 70 years. Satellite optical imagery was used for the calculation of the Normalised Difference Vegetation Index (NDVI) for the time period between December 2015 to July 2016 and C-Band Synthetic Aperture Radar imagery was used to derive correlative changes in backscatter intensity (σ0). The results are indicative of the overgrazing in the area with the temporal and spatial variations of grazing defined. Both the NDVI and the σ0 values demonstrate sudden shifts in vegetation cover following the start of the grazing period with the greatest shifts being evident in close proximity to the location of farms. NDVI and backscatter coefficient correlation was measured at 0.7 and 0.8 for the months of February and April respectively. Shifts in NDVI value by 0.1 correspond to a shift in σ0 by 4 db. VH cross-polarization showed greater sensitivity to changes in vegetation than VV. The paper also examines the capability of C-Band Synthetic Aperture Radar to measure changes in plant structure and vegetation fraction as the result of grazing. Depending on grazing intensity, backscatter coefficient varies according to vegetation density.

  3. Toward Aboveground Biomass Estimation with RADAR, Lidar and Optical Remote Sensing Data in Southern Mexico

    Science.gov (United States)

    Urbazaev, M.; Thiel, C. J.; Schmullius, C.

    2014-12-01

    Information on the spatial distribution of aboveground biomass (AGB) over large areas is needed (1) for understanding and managing the processes involved in the carbon cycle, and (2) supporting international policies for climate change mitigation and adaption. Using remote sensing techniques it is possible to provide spatially explicit information of AGB from local to global scales. In this work we present the first results on the use of multi-sensor remote sensing data to estimate AGB over three test sites in southern Mexico. In order to develop a set of AGB retrieval algorithms, we firstly compared different SAR parameters (e.g. multi-polarized backscatter intensities and interferometric coherence) obtained from ALOS PALSAR sensor and Landsat imagery with field-based AGB estimates using empirical regressions and analyzed the relationships between them. The next steps of the work will be development of a two-stage up-scaling approach: firstly, to enlarge the cal/val data, we propose to estimate AGB along airborne LiDAR (from G-LiHT sensor) transects using field-based AGB and LiDAR height metrics. With LiDAR-based AGB we will then calibrate SAR parameters in a non-parametric model (e.g., randomForest) to create AGB maps over the study areas. An overall aim of the study is the analysis of capabilities and limitations of SAR data for AGB mapping and the investigation of the potential synergistic use of SAR, LiDAR and optical systems.The proposed monitoring tool will facilitate quantitative estimations in loss of carbon storage and support the selection of terrestrial (e.g. tropical dry forests, shrublands) sites for conservation priorities with high value for the national carbon budget.

  4. Quantum radar

    CERN Document Server

    Lanzagorta, Marco

    2011-01-01

    This book offers a concise review of quantum radar theory. Our approach is pedagogical, making emphasis on the physics behind the operation of a hypothetical quantum radar. We concentrate our discussion on the two major models proposed to date: interferometric quantum radar and quantum illumination. In addition, this book offers some new results, including an analytical study of quantum interferometry in the X-band radar region with a variety of atmospheric conditions, a derivation of a quantum radar equation, and a discussion of quantum radar jamming.This book assumes the reader is familiar w

  5. Radar Chart

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Radar Chart collection is an archived product of summarized radar data. The geographic coverage is the 48 contiguous states of the United States. These hourly...

  6. Behavior Subtraction applied to radar

    NARCIS (Netherlands)

    Rossum, W.L. van; Caro Cuenca, M.

    2014-01-01

    An algorithm developed for optical images has been applied to radar data. The algorithm, Behavior Subtraction, is based on capturing the dynamics of a scene and detecting anomalous behavior. The radar application is the detection of small surface targets at sea. The sea surface yields the expected s

  7. Volcanic and Tectonic Activity in the Red Sea Region (2004-2013): Insights from Satellite Radar Interferometry and Optical Imagery

    KAUST Repository

    Xu, Wenbin

    2015-04-01

    Studying recent volcanic and tectonic events in the Red Sea region is important for improving our knowledge of the Red Sea plate boundary and for regional geohazard assessments. However, limited information has been available about the past activity due to insufficient in-situ data and remoteness of some of the activity. In this dissertation, I have used satellite remote sensing to derive new information about several recent volcanic and tectonic events in the Red Sea region. I first report on three volcanic eruptions in the southern Red Sea, the 2007-8 Jebel at Tair eruption and the 2011-12 & 2013 Zubair eruptions, which resulted in formation of two new islands. Series of high- resolution optical images were used to map the extent of lava flows and to observe and analyze the growth and destructive processes of the new islands. I used Interferometric Synthetic Aperture Radar (InSAR) data to study the evolution of lava flows, to estimate their volumes, as well as to generate ground displacements maps, which were used to model the dikes that fed the eruptions. I then report on my work of the 2009 Harrat Lunayyir dike intrusion and the 2004 Tabuk earthquake sequence in western Saudi Arabia. I used InSAR observations and stress calculations to study the intruding dike at Harrat Lunayyir, while I combined InSAR data and Bayesian estimation to study the Tabuk earthquake activity. The key findings of the thesis are: 1) The recent volcanic eruptions in the southern Red Sea indicate that the area is magmatically more active than previously acknowledged and that a rifting episode has been taken place in the southern Red Sea; 2) Stress interactions between an ascending dike intrusion and normal faulting on graben-bounding faults above the dike can inhibit vertical propagation of magma towards the surface; 3) InSAR observations can improve locations of shallow earthquakes and fault model uncertainties are useful to associate earthquake activity with mapped faults; 4). The

  8. Radar Fundamentals, Presentation

    OpenAIRE

    Jenn, David

    2008-01-01

    Topics include: introduction, radar functions, antennas basics, radar range equation, system parameters, electromagnetic waves, scattering mechanisms, radar cross section and stealth, and sample radar systems.

  9. Radar Fundamentals, Presentation

    OpenAIRE

    Jenn, David

    2008-01-01

    Topics include: introduction, radar functions, antennas basics, radar range equation, system parameters, electromagnetic waves, scattering mechanisms, radar cross section and stealth, and sample radar systems.

  10. Radar equations for modern radar

    CERN Document Server

    Barton, David K

    2012-01-01

    Based on the classic Radar Range-Performance Analysis from 1980, this practical volume extends that work to ensure applicability of radar equations to the design and analysis of modern radars. This unique book helps you identify what information on the radar and its environment is needed to predict detection range. Moreover, it provides equations and data to improve the accuracy of range calculations. You find detailed information on propagation effects, methods of range calculation in environments that include clutter, jamming and thermal noise, as well as loss factors that reduce radar perfo

  11. Land cover classification accuracy from electro-optical, X, C, and L-band Synthetic Aperture Radar data fusion

    Science.gov (United States)

    Hammann, Mark Gregory

    The fusion of electro-optical (EO) multi-spectral satellite imagery with Synthetic Aperture Radar (SAR) data was explored with the working hypothesis that the addition of multi-band SAR will increase the land-cover (LC) classification accuracy compared to EO alone. Three satellite sources for SAR imagery were used: X-band from TerraSAR-X, C-band from RADARSAT-2, and L-band from PALSAR. Images from the RapidEye satellites were the source of the EO imagery. Imagery from the GeoEye-1 and WorldView-2 satellites aided the selection of ground truth. Three study areas were chosen: Wad Medani, Sudan; Campinas, Brazil; and Fresno- Kings Counties, USA. EO imagery were radiometrically calibrated, atmospherically compensated, orthorectifed, co-registered, and clipped to a common area of interest (AOI). SAR imagery were radiometrically calibrated, and geometrically corrected for terrain and incidence angle by converting to ground range and Sigma Naught (?0). The original SAR HH data were included in the fused image stack after despeckling with a 3x3 Enhanced Lee filter. The variance and Gray-Level-Co-occurrence Matrix (GLCM) texture measures of contrast, entropy, and correlation were derived from the non-despeckled SAR HH bands. Data fusion was done with layer stacking and all data were resampled to a common spatial resolution. The Support Vector Machine (SVM) decision rule was used for the supervised classifications. Similar LC classes were identified and tested for each study area. For Wad Medani, nine classes were tested: low and medium intensity urban, sparse forest, water, barren ground, and four agriculture classes (fallow, bare agricultural ground, green crops, and orchards). For Campinas, Brazil, five generic classes were tested: urban, agriculture, forest, water, and barren ground. For the Fresno-Kings Counties location 11 classes were studied: three generic classes (urban, water, barren land), and eight specific crops. In all cases the addition of SAR to EO resulted

  12. Planetary Radar

    Science.gov (United States)

    Neish, Catherine D.; Carter, Lynn M.

    2015-01-01

    This chapter describes the principles of planetary radar, and the primary scientific discoveries that have been made using this technique. The chapter starts by describing the different types of radar systems and how they are used to acquire images and accurate topography of planetary surfaces and probe their subsurface structure. It then explains how these products can be used to understand the properties of the target being investigated. Several examples of discoveries made with planetary radar are then summarized, covering solar system objects from Mercury to Saturn. Finally, opportunities for future discoveries in planetary radar are outlined and discussed.

  13. MSDAR光纤传输与同步研究%Fibre-Optic Transmission and Synchronization of Multi-Station Digital Array Radar

    Institute of Scientific and Technical Information of China (English)

    龙伟军; 龚树凤; 贲德

    2013-01-01

    多基站数字阵雷达面临信号远距传输、时序同步与信号分集等技术难题.本文针对MSDAR构建了具有较强适用性的光纤同步系统.该系统采用信号分级同步策略对时序信号逐级同步,精度可达纳秒量级.采用多级复用技术显著提高单纤信道传输容量以解决MSDAR信号分集问题.本文分析了影响光纤传输同步性的诸方面因素,结合数字阵雷达原理建立了信号同步性对雷达性能影响的关系模型.详细分析了同步性对雷达波束指向影响.结果表明光纤同步系统若满足MSDAR系统需求,须折中考虑系统工作频率、带宽、通道等系统参数,定量的结果可由模型给出.%Multi-station digital array radar (MSDAR) confronts with several puzzles such as distant transmission,timing synchronization,signal distribution and collection.A universal fibre-optic transmission synchronization and signal diversity system is architected,which exploits hierarchical synchronization approaches to achieve precise synchronization of nanosecond magnitude.Hierarchical channel multiplex techniques are designed to promote the fibre-optic channel capacity to address the signal diversity difficulties of MSDAR.Based on the analysis of effects on synchronization and the characteristics of digital array radar (DAR),the mathematic models of the relationship between synchronization and radar performances are built.According to the models,the beam pointing errors are estimated.The theoretical analysis and simulation results indicate that the fibre-optic transmission synchronization system can satisfy high frequency MSDAR,but with the increase of operation frequency and bandwidth,the effects will be more serious and the quantitative results can be calculated on the models.

  14. Radar Interferometry : A New Tool for Accurate Height Modelling

    NARCIS (Netherlands)

    Halsema, D. van; Hanssen, R.

    1996-01-01

    Compared to optical sensors the use of radar for Earth observation has only just begun. The first use of radar for this purpose was reported in the sixties. The most important reason to use radar instead of optical sensors is its capability to penetrate through clouds and its day and night imaging

  15. Near-Real-Time Monitoring and Reporting of Crop Growth Condition and Harvest Status Using an Integrated Optical and Radar Approach at the National-Scale in Canada

    Science.gov (United States)

    Shang, J.

    2015-12-01

    There has been an increasing need to have accurate and spatially detailed information on crop growth condition and harvest status over Canada's agricultural land so that the impacts of environmental conditions, market supply and demand, and transportation network limitations on crop production can be understood fully and acted upon in a timely manner. Presently, Canada doesn't have a national dataset that can provide near-real-time geospatial information on crop growth stage and harvest systematically so that reporting on risk events can be linked directly to the grain supply chain and crop production fluctuations. The intent of this study is to develop an integrated approach using Earth observation (EO) technology to provide a consistent, comprehensive picture of crop growth cycles (growth conditions and stages) and agricultural management activities (field preparation for seeding, harvest, and residue management). Integration of the optical and microwave satellite remote sensing technologies is imperative for robust methodology development and eventually for operational implementation. Particularly, the current synthetic aperture radar (SAR) system Radarsat-2 and to be launched Radarsat Constellation Mission (RCM) are unique EO resources to Canada. Incorporating these Canadian SAR resources with international SAR missions such as the Cosmesky-Med and TerraSAR, could be of great potential for developing change detection technologies particularly useful for monitoring harvest as well as other types of agricultural management events. The study revealed that radar and multi-scale (30m and 250m) optical satellite data can directly detect or infer 1) seeding date, 2) crop growth stages and gross primary productivity (GPP), and 3) harvest progress. Operational prototypes for providing growing-season information at the crop-specific level will be developed across the Canadian agricultural land base.

  16. Combined use of optical and radar satellite data for the monitoring of irrigation and soil moisture of wheat crops

    Directory of Open Access Journals (Sweden)

    R. Fieuzal

    2011-04-01

    Full Text Available The objective of this study is to get a better understanding of radar signal over irrigated wheat fields and to assess the potentialities of radar observations for the monitoring of soil moisture. Emphasis is put on the use of high spatial and temporal resolution satellite data (Envisat/ASAR and Formosat-2. Time series of images were collected over the Yaqui irrigated area (Mexico throughout one agricultural season from December 2007 to May 2008, together with measurements of soil and vegetation characteristics and agricultural practices. The comprehensive analysis of these data indicates that the sensitivity of the radar signal to vegetation is masked by the variability of soil conditions. On-going irrigated areas can be detected all over the wheat growing season. The empirical algorithm developed for the retrieval of topsoil moisture from Envisat/ASAR images takes advantage of the Formosat-2 instrument capabilities to monitor the seasonality of wheat canopies. This monitoring is performed using dense time series of images acquired by Formosat-2 to set up the SAFY vegetation model. Topsoil moisture estimates are not reliable at the timing of plant emergence and during plant senescence. Estimates are accurate from tillering to grain filling stages with an absolute error about 9% (0.09 m3 m−3, 35% in relative value. This result is attractive since topsoil moisture is estimated at a high spatial resolution (i.e. over subfields of about 5 ha for a large range of biomass water content (from 5 and 65 t ha−1 independently from the viewing angle of ASAR acquisition (incidence angles IS1 to IS6.

  17. Gyroklystron-Powered WARLOC Radar

    Science.gov (United States)

    Danly, B. G.; Cheung, W. J.; Gregers-Hansen, V.; Linde, G.; Ngo, M.

    2003-12-01

    A high-power, coherent, W-band (94 GHz) millimeter-wave radar has been developed at the Naval Research Laboratory. This radar, named WARLOC, employs a 100 kW peak power, 10 kW average power gyro-klystron as the final power amplifier, an overmoded transmission line system, and a quasi-optical duplexer, together with a high gain antenna, four-channel receiver, and state-of-the-art signal processing. The gyro-amplifiers and the implementation in the WARLOC radar will be described.

  18. High resolution shallow geologic characterization of a late Pleistocene eolian environment using ground penetrating radar and optically stimulated luminescence techniques: North Carolina, USA

    Science.gov (United States)

    Mallinson, D.; Mahan, S.; Moore, Christine

    2008-01-01

    Geophysical surveys, sedimentology, and optically-stimulated luminescence age analyses were used to assess the geologic development of a coastal system near Swansboro, NC. This area is a significant Woodland Period Native American habitation and is designated the "Broad Reach" archaeological site. 2-d and 3-d subsurface geophysical surveys were performed using a ground penetrating radar system to define the stratigraphic framework and depositional facies. Sediment samples were collected and analyzed for grain-size to determine depositional environments. Samples were acquired and analyzed using optically stimulated luminescence techniques to derive the depositional age of the various features. The data support a low eolian to shallow subtidal coastal depositional setting for this area. Li-DAR data reveal ridge and swale topography, most likely related to beach ridges, and eolian features including low-relief, low-angle transverse and parabolic dunes, blowouts, and a low-relief eolian sand sheet. Geophysical data reveal dominantly seaward dipping units, and low-angle mounded features. Sedimentological data reveal mostly moderately-well to well-sorted fine-grained symmetrical to coarse skewed sands, suggesting initial aqueous transport and deposition, followed by eolian reworking and bioturbation. OSL data indicate initial coastal deposition prior to ca. 45,000 yBP, followed by eolian reworking and low dune stabilization at ca. 13,000 to 11,500 yBP, and again at ca. 10,000 yBP (during, and slightly after the Younger Dryas chronozone).

  19. Radar Observations of Asteroids

    Science.gov (United States)

    Ostro, S. J.

    2003-05-01

    During the past 25 years, radar investigations have provided otherwise unavailable information about the physical and dynamical properties of more than 200 asteroids. Measurements of the distribution of echo power in time delay and Doppler frequency provide two-dimensional images with spatial resolution as fine as a decameter. Sequences of delay-Doppler images can be used to produce geologically detailed three-dimensional models, to define the rotation state precisely, to constrain the internal density distribution, and to estimate the trajectory of the object's center of mass. Radar wavelengths (4 to 13 cm) and the observer's control of transmitted and received polarizations make the observations sensitive to near-surface bulk density and macroscopic structure. Since delay-Doppler positional measurements are orthogonal to optical angle measurements and typically have much finer fractional precision, they are powerful for refining orbits and prediction ephemerides. Radar astrometry can add decades or centuries to the interval over which an asteroid's close Earth approaches can accurately be predicted and can significantly refine collision probability estimates based on optical astrometry alone. In the highly unlikely case that a small body is on course for an Earth collision in this century, radar reconnaissance would almost immediately distinguish between an impact trajectory and a near miss and would dramatically reduce the difficulty and cost of any effort to prevent the collision. The sizes and rotation periods of radar-detected asteroids span more than four orders of magnitude. These observations have revealed both stony and metallic objects, elongated and nonconvex shapes as well as nearly featureless spheroids, small-scale morphology ranging from smoother than the lunar regolith to rougher than the rockiest terrain on Mars, craters and diverse linear structures, non-principal-axis spin states, contact binaries, and binary systems.

  20. L-band Synthetic Aperture Radar imagery performs better than optical datasets at retrieving woody fractional cover in deciduous, dry savannahs

    Science.gov (United States)

    Naidoo, Laven; Mathieu, Renaud; Main, Russell; Wessels, Konrad; Asner, Gregory P.

    2016-10-01

    Woody canopy cover (CC) is the simplest two dimensional metric for assessing the presence of the woody component in savannahs, but detailed validated maps are not currently available in southern African savannahs. A number of international EO programs (including in savannah landscapes) advocate and use optical LandSAT imagery for regional to country-wide mapping of woody canopy cover. However, previous research has shown that L-band Synthetic Aperture Radar (SAR) provides good performance at retrieving woody canopy cover in southern African savannahs. This study's objective was to evaluate, compare and use in combination L-band ALOS PALSAR and LandSAT-5 TM, in a Random Forest environment, to assess the benefits of using LandSAT compared to ALOS PALSAR. Additional objectives saw the testing of LandSAT-5 image seasonality, spectral vegetation indices and image textures for improved CC modelling. Results showed that LandSAT-5 imagery acquired in the summer and autumn seasons yielded the highest single season modelling accuracies (R2 between 0.47 and 0.65), depending on the year but the combination of multi-seasonal images yielded higher accuracies (R2 between 0.57 and 0.72). The derivation of spectral vegetation indices and image textures and their combinations with optical reflectance bands provided minimal improvement with no optical-only result exceeding the winter SAR L-band backscatter alone results (R2 of ∼0.8). The integration of seasonally appropriate LandSAT-5 image reflectance and L-band HH and HV backscatter data does provide a significant improvement for CC modelling at the higher end of the model performance (R2 between 0.83 and 0.88), but we conclude that L-band only based CC modelling be recommended for South African regions.

  1. Weather Radar Stations

    Data.gov (United States)

    Department of Homeland Security — These data represent Next-Generation Radar (NEXRAD) and Terminal Doppler Weather Radar (TDWR) weather radar stations within the US. The NEXRAD radar stations are...

  2. Integration and Validation of Avian Radars (IVAR)

    Science.gov (United States)

    2011-08-01

    operations; 1-year visual census; multiple eBirdRad radars; fiber- optic wired LAN (planned) NAS Patuxent River, MD X B X Medium-sized air station...introduced a multibeam avian radar antenna that purports to double the beam width (from 4° to 8°), while at the same time increasing the precision of the

  3. Bistatic radar

    CERN Document Server

    Willis, Nick

    2004-01-01

    Annotation his book is a major extension of a chapter on bistatic radar written by the author for the Radar Handbook, 2nd edition, edited by Merrill Skolnik. It provides a history of bistatic systems that points out to potential designers the applications that have worked and the dead-ends not worth pursuing. The text reviews the basic concepts and definitions, and explains the mathematical development of relationships, such as geometry, Ovals of Cassini, dynamic range, isorange and isodoppler contours, target doppler, and clutter doppler spread.Key Features * All development and analysis are

  4. Resonance and aspect matched adaptive radar (RAMAR)

    CERN Document Server

    Barrett, Terence William

    2012-01-01

    The book describes a new form of radar for which the target response is frequency, i.e., resonance-dependent. The book provides both prototype designs and empirical results collected from a variety of targets. The new form of radar, called RAMAR (Resonance and Aspect Matched Adaptive Radar) advances radar - mere ranging and detection - to the level of RF spectroscopy, and permits an advance of spectroscopic methods from optical, through infra-red and into the RF spectral range. The book will describe how a target's response can be a function of frequency components in the transmitted signal's

  5. Radar detection

    CERN Document Server

    DiFranco, Julius

    2004-01-01

    This book presents a comprehensive tutorial exposition of radar detection using the methods and techniques of mathematical statistics. The material presented is as current and useful to today's engineers as when the book was first published by Prentice-Hall in 1968 and then republished by Artech House in 1980. The book is divided into six parts.

  6. Radar Investigations of Asteroids

    Science.gov (United States)

    Ostro, S.

    2004-05-01

    Radar investigations have provided otherwise unavailable information about the physical and dynamical properties of about 230 asteroids. Measurements of the distribution of echo power in time delay (range) and Doppler frequency (line-of-sight velocity) provide two-dimensional images with spatial resolution as fine as a decameter. Sequences of delay-Doppler images can be used to produce geologically detailed three-dimensional models, to define the rotation state precisely, to constrain the internal density distribution, and to estimate the trajectory of the object's center of mass. Radar wavelengths (4 to 13 cm) and the observer's control of transmitted and received polarizations make the observations sensitive to near-surface bulk density and macroscopic structure. Since delay-Doppler measurements are orthogonal to optical angle measurements and typically have much finer fractional precision, they are powerful for refining orbits and prediction ephemerides. Such astrometric measurements can add decades or centuries to the interval over which an asteroid's close Earth approaches can accurately be predicted and can significantly refine collision probability estimates based on optical astrometry alone. In the highly unlikely case that a small body is on course for an Earth collision in this century, radar reconnaissance would almost immediately distinguish between an impact trajectory and a near miss and would dramatically reduce the difficulty and cost of any effort to prevent the collision. The sizes and rotation periods of radar-detected asteroids span more than four orders of magnitude. The observations have revealed both stony and metallic objects, elongated and nonconvex shapes as well as nearly featureless spheroids, small-scale morphology ranging from smoother than the lunar regolith to rougher than the rockiest terrain on Mars, craters and diverse linear structures, non-principal-axis spin states, contact binaries, and binary systems.

  7. Application of Optical Fiber Data Transmission Technology into Digital Array Radar%光纤传输技术在数字阵列雷达中的应用

    Institute of Scientific and Technical Information of China (English)

    赵磊; 郭文卓

    2011-01-01

    随着数字阵列雷达的发展,天线阵面与控制中心之间需要交换的数据量越来越大,在这种情况下,光纤传输技术由于抗干扰性强、传输容量大等优点而被广泛采用.波分复用技术和光纤滑环技术的日渐成熟使得光纤传输系统在数字阵列雷达中的应用具备了工程可实现性.首先给出了典型的光纤传输系统构建方案,然后对光纤传输中的关键技术实现、光链路故障的检测和定位等做了分析.该方案已在某雷达中成功应用,性能稳定可靠.%With the development of digital array radar, the amount of data to be exchanged between antenna and control center is increasing remarkablely. To meet such requirements, optical fiber technology for data transmission has received extensive attention because of its high anti-interference performance and high transmission capacity. With the advancement of the techniques of wavelength division multiplexing (WDM) and fiber optic rotary joint, optical fiber data transmission now is applicable in digital array radar system. In this paper, a typical optical fiber transmission scheme is presented, and the analysis on the key technology and the fault detection and position of optical link is also performed. The scheme proposed is being successfully applied into certain radar product, and the performance is proved to be effective and reliable.

  8. Limitations of Radar Coordinates

    OpenAIRE

    Bini, Donato; Lusanna, Luca; Mashhoon, Bahram

    2004-01-01

    The construction of a radar coordinate system about the world line of an observer is discussed. Radar coordinates for a hyperbolic observer as well as a uniformly rotating observer are described in detail. The utility of the notion of radar distance and the admissibility of radar coordinates are investigated. Our results provide a critical assessment of the physical significance of radar coordinates.

  9. RADAR PPI Scope Overlay

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — RADAR PPI Scope Overlays are used to position a RADAR image over a station at the correct resolution. The archive maintains several different RADAR resolution types,...

  10. Advances in bistatic radar

    CERN Document Server

    Willis, Nick

    2007-01-01

    Advances in Bistatic Radar updates and extends bistatic and multistatic radar developments since publication of Willis' Bistatic Radar in 1991. New and recently declassified military applications are documented. Civil applications are detailed including commercial and scientific systems. Leading radar engineers provide expertise to each of these applications. Advances in Bistatic Radar consists of two major sections: Bistatic/Multistatic Radar Systems and Bistatic Clutter and Signal Processing. Starting with a history update, the first section documents the early and now declassified military

  11. A Parallel, High-Fidelity Radar Model

    Science.gov (United States)

    Horsley, M.; Fasenfest, B.

    2010-09-01

    Accurate modeling of Space Surveillance sensors is necessary for a variety of applications. Accurate models can be used to perform trade studies on sensor designs, locations, and scheduling. In addition, they can be used to predict system-level performance of the Space Surveillance Network to a collision or satellite break-up event. A high fidelity physics-based radar simulator has been developed for Space Surveillance applications. This simulator is designed in a modular fashion, where each module describes a particular physical process or radar function (radio wave propagation & scattering, waveform generation, noise sources, etc.) involved in simulating the radar and its environment. For each of these modules, multiple versions are available in order to meet the end-users needs and requirements. For instance, the radar simulator supports different atmospheric models in order to facilitate different methods of simulating refraction of the radar beam. The radar model also has the capability to use highly accurate radar cross sections generated by the method of moments, accelerated by the fast multipole method. To accelerate this computationally expensive model, it is parallelized using MPI. As a testing framework for the radar model, it is incorporated into the Testbed Environment for Space Situational Awareness (TESSA). TESSA is based on a flexible, scalable architecture, designed to exploit high-performance computing resources and allow physics-based simulation of the SSA enterprise. In addition to the radar models, TESSA includes hydrodynamic models of satellite intercept and debris generation, orbital propagation algorithms, optical brightness calculations, optical system models, object detection algorithms, orbit determination algorithms, simulation analysis and visualization tools. Within this framework, observations and tracks generated by the new radar model are compared to results from a phenomenological radar model. In particular, the new model will be

  12. Influences of weather phenomena on automotive laser radar systems

    Science.gov (United States)

    Rasshofer, R. H.; Spies, M.; Spies, H.

    2011-07-01

    Laser radar (lidar) sensors provide outstanding angular resolution along with highly accurate range measurements and thus they were proposed as a part of a high performance perception system for advanced driver assistant functions. Based on optical signal transmission and reception, laser radar systems are influenced by weather phenomena. This work provides an overview on the different physical principles responsible for laser radar signal disturbance and theoretical investigations for estimation of their influence. Finally, the transmission models are applied for signal generation in a newly developed laser radar target simulator providing - to our knowledge - worldwide first HIL test capability for automotive laser radar systems.

  13. Radar-to-Radar Interference Suppression for Distributed Radar Sensor Networks

    OpenAIRE

    Wen-Qin Wang; Huaizong Shao

    2014-01-01

    Radar sensor networks, including bi- and multi-static radars, provide several operational advantages, like reduced vulnerability, good system flexibility and an increased radar cross-section. However, radar-to-radar interference suppression is a major problem in distributed radar sensor networks. In this paper, we present a cross-matched filtering-based radar-to-radar interference suppression algorithm. This algorithm first uses an iterative filtering algorithm to suppress the radar-to-radar ...

  14. Optical fiber transmission of radar RF pulse with stable time delay based on wavelength control%基于波长控制的雷达射频脉冲稳时光纤传输方案

    Institute of Scientific and Technical Information of China (English)

    乔宁; 余岚; 钟炎平

    2015-01-01

    In view of the problem of transmission time delay being unstable between the passive radar system stations with the time difference of arrival (TDOA) location, this paper proposes an optical fiber transmission scheme of radar RF pulse with stable time delay based on the wavelength control. The relations between the trans-mission time delay of optical links and the wavelength of the lasers are analyzed theoretically, firstly, the method of stabilizing the time delay by changing the lasers’wavelength proposed next, and finally, the simulations to this proposed scheme performed. Simulation results show that this proposed scheme can make the peak-to-peak value of time delay fluctuations lower than 374ps, which meets the stability requirement for transmission time delay in TDOA passive radar system.%针对时差定位的无源雷达系统站间传输时延不稳定问题,提出了一种基于波长控制的雷达射频脉冲稳时光纤传输方案.首先理论分析了光纤链路的传输时延和激光器波长之间的关系,然后提出了通过改变激光器波长稳定传输时延的方法,最后对所提方案进行了仿真.仿真结果表明,该方案能使传输时延波动的峰-峰值小于374 ps.满足了时差定位的无源雷达系统对传输时延稳定性的要求.

  15. Adaptive radar resource management

    CERN Document Server

    Moo, Peter

    2015-01-01

    Radar Resource Management (RRM) is vital for optimizing the performance of modern phased array radars, which are the primary sensor for aircraft, ships, and land platforms. Adaptive Radar Resource Management gives an introduction to radar resource management (RRM), presenting a clear overview of different approaches and techniques, making it very suitable for radar practitioners and researchers in industry and universities. Coverage includes: RRM's role in optimizing the performance of modern phased array radars The advantages of adaptivity in implementing RRMThe role that modelling and

  16. Radar and ARPA manual

    CERN Document Server

    Bole, A G

    2013-01-01

    Radar and ARPA Manual focuses on the theoretical and practical aspects of electronic navigation. The manual first discusses basic radar principles, including principles of range and bearing measurements and picture orientation and presentation. The text then looks at the operational principles of radar systems. Function of units; aerial, receiver, and display principles; transmitter principles; and sitting of units on board ships are discussed. The book also describes target detection, Automatic Radar Plotting Aids (ARPA), and operational controls of radar systems, and then discusses radar plo

  17. Principles of modern radar systems

    CERN Document Server

    Carpentier, Michel H

    1988-01-01

    Introduction to random functions ; signal and noise : the ideal receiver ; performance of radar systems equipped with ideal receivers ; analysis of the operating principles of some types of radar ; behavior of real targets, fluctuation of targets ; angle measurement using radar ; data processing of radar information, radar coverage ; applications to electronic scanning antennas to radar ; introduction to Hilbert spaces.

  18. Passive MIMO Radar Detection

    Science.gov (United States)

    2013-09-01

    cumulative distribution function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 CORA COvert RAdar...PaRaDe), developed by the Insti- tute of Electronic Systems at the Warsaw University of Technology [59, 60]; COvert RAdar ( CORA ), developed by the German

  19. Weather Radar Impact Zones

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — These data represent an inventory of the national impacts of wind turbine interference with NEXRAD radar stations. This inventory was developed by the NOAA Radar...

  20. Digital LPI Radar Detector

    OpenAIRE

    Ong, Peng Ghee; Teng, Haw Kiad

    2001-01-01

    Approved for public release; distribution is unlimited The function of a Low Probability ofIntercept (LPI) radar is to prevent its interception by an Electronic Support (ES) receiver. This objective is generally achieved through the use of a radar waveform that is mismatched to those waveforms for which an ES receiver is tuned. This allows the radar to achieve a processing gain, with respect to the ES receiver, that is equal to the time-bandwidth product ofthe radar waveform. This...

  1. Data Fusion and Its Application of Electro-Optical Sensor and Radar in Ship Cannon Weapon System%舰炮武器系统光电传感器与雷达数据融合及应用

    Institute of Scientific and Technical Information of China (English)

    丛树学; 高俊云

    2012-01-01

    目标参数的质量直接影响武器系统的命中概率,因此,光电、雷达传感器数据的选优尤为重要,数据融合解决了这一问题。针对舰炮武器系统雷达及光电传感器的数据融合,建立了数学模型,并根据所建立的模型提出工程实践,提高了武器系统的命中率。%The quality of target parameters influences the hit probability of weapon system directly. I nereIore, me opLmuzu- tion of the data of electro-optical sensor and radar is very important. Data fusion could solve the problem. In view of the data fusion of electro-opticaI sensor and radar in ship cannon system, the mathematic model is established, and the engineering practice based on the model is described. The data fusion method mentioned in this paper improves the hit probability of the weapon system.

  2. SuperDARN scalar radar equations

    CERN Document Server

    Berngardt, O I; Potekhin, A P

    2016-01-01

    The quadratic scalar radar equations are obtained for SuperDARN radars that are suitable for the analysis and interpretation of experimental data. The paper is based on a unified approach to the obtaining radar equations for the monostatic and bistatic sounding with use of hamiltonian optics and ray representation of scalar Green's function and without taking into account the polarization effects. The radar equation obtained is the sum of several terms corresponding to the propagation and scattering over the different kinds of trajectories, depending on their smoothness and the possibility of reflection from the ionosphere. It is shown that the monostatic sounding in the media with significant refraction, unlike the case of refraction-free media, should be analyzed as a combination of monostatic and bistatic scattering. This leads to strong dependence of scattering amplitude on background ionospheric density due to focusing mechanism and appearance of new (bistatic) areas of effective scattering with signific...

  3. Network radar countermeasure systems integrating radar and radar countermeasures

    CERN Document Server

    Jiang, Qiuxi

    2016-01-01

    This is the very first book to present the network radar countermeasure system. It explains in detail the systematic concept of combining radar and radar countermeasures from the perspective of the information acquisition of target location, the optimization of the reconnaissance and detection, the integrated attack of the signals and facilities, and technological and legal developments concerning the networked system. It achieves the integration of the initiative and passivity, detection and jamming. The book explains how the system locates targets, completes target identification, tracks targets and compiles the data.

  4. Deep Stochastic Radar Models

    OpenAIRE

    Wheeler, Tim Allan; Holder, Martin; Winner, Hermann; Kochenderfer, Mykel

    2017-01-01

    Accurate simulation and validation of advanced driver assistance systems requires accurate sensor models. Modeling automotive radar is complicated by effects such as multipath reflections, interference, reflective surfaces, discrete cells, and attenuation. Detailed radar simulations based on physical principles exist but are computationally intractable for realistic automotive scenes. This paper describes a methodology for the construction of stochastic automotive radar models based on deep l...

  5. Radar: Human Safety Net

    Science.gov (United States)

    Ritz, John M.

    2016-01-01

    Radar is a technology that can be used to detect distant objects not visible to the human eye. A predecessor of radar, called the telemobiloscope, was first used to detect ships in the fog in 1904 off the German coast. Many scientists have worked on the development and refinement of radar (Hertz with electromagnetic waves; Popov with determining…

  6. Radar and wind turbines; Radar en windturbines

    Energy Technology Data Exchange (ETDEWEB)

    Van Doorn, H.

    2010-03-15

    In the last years the developments of wind parks were hampered because of their possible effect on the radar for observation of air traffic. Work is currently being done on a new assessment model for wind turbines under the auspices of the steering group National Security for the military radar systems. Air traffic control Netherlands (LVNL) will look at the options for civil radars to join in. [Dutch] In de afgelopen jaren zijn windparkontwikkelingen onder meer belemmerd vanwege mogelijke effecten op radar voor de waarneming van luchtverkeer. Onder auspicien van de stuurgroep Nationale Veiligheid voor de militaire radarsystemen op land wordt gewerkt aan een nieuw beoordelingsmodel voor windturbines. De Luchtverkeersleiding Nederland (LVNL) zal bezien in hoeverre de civiele radars hierbij kunnen aansluiten.

  7. Radar reconnaissance of near-Earth asteroids

    Science.gov (United States)

    Ostro, Steven J.; Giorgini, Jon D.; Benner, Lance A. M.

    2007-05-01

    Radar is a uniquely powerful source of information about near-Earth asteroid (NEA) physical properties and orbits. Measurements of the distribution of echo power in time delay (range) and Doppler frequency (radial velocity) constitute two-dimensional images that can provide spatial resolution finer than a decameter. The best radar images reveal geologic details, including craters and blocks. Radar wavelengths (13 cm at Arecibo, 3.5 cm at Goldstone) are sensitive to the bulk density (a joint function of mineralogy and porosity) and the degree of decimeter-scale structural complexity of the uppermost meter or so of the surface. Radar can determine the masses of binary NEAs via Kepler's third law and of solitary NEAs via measurement of the Yarkovsky acceleration. With adequate orientational coverage, a sequence of images can be used to construct a three-dimensional model, to define the rotation state, to determine the distribution of radar surface properties, and to constrain the internal density distribution. As of mid 2006, radar has detected echoes from 193 NEAs, of which 107 are designated Potentially Hazardous Asteroids. Radar has revealed both stony and metallic objects, principal-axis and non-principal-axis rotators, smooth and extremely rough surfaces, objects that appear to be monolithic fragments and objects likely to be nearly strengthless gravitational aggregates, spheroids and highly elongated shapes, contact-binary shapes, and binary systems. Radar can add centuries to the interval over which close Earth approaches can accurately be predicted, significantly refining collision probability estimates compared to those based on optical astrometry alone. If a small body is on course for a collision with Earth in this century, delay-Doppler radar echoes could almost immediately let us recognize this by distinguishing between an impact trajectory and a near miss, and would dramatically reduce the difficulty and cost of any effort to prevent the collision.

  8. Orbit Determination Using a Decametric Line-of-Sight Radar

    Science.gov (United States)

    Frazer, G.; Meehan, D.; Rutten, M.; Gordon, N.

    2013-09-01

    The paper investigates the effectiveness of a ground-based bistatic decametric line-of-sight radar for orbit determination of low Earth orbit satellites. Radar observations of the Hubble Space Telescope are used to demonstrate our approach. We present methods for initial orbit determination and for the case of improving an a-priori established orbit descriptor. We discuss the suitability of this class of radar for wide-field space situational awareness and consider a SSA architecture that uses this class of radar to cue high-accuracy narrow field-of-view optical sensors as part of a wide-field high-accuracy system for SSA.

  9. Pulse Doppler radar

    CERN Document Server

    Alabaster, Clive

    2012-01-01

    This book is a practitioner's guide to all aspects of pulse Doppler radar. It concentrates on airborne military radar systems since they are the most used, most complex, and most interesting of the pulse Doppler radars; however, ground-based and non-military systems are also included. It covers the fundamental science, signal processing, hardware issues, systems design and case studies of typical systems. It will be a useful resource for engineers of all types (hardware, software and systems), academics, post-graduate students, scientists in radar and radar electronic warfare sectors and milit

  10. Understanding radar systems

    CERN Document Server

    Kingsley, Simon

    1999-01-01

    What is radar? What systems are currently in use? How do they work? This book provides engineers and scientists with answers to these critical questions, focusing on actual radar systems in use today. It is a perfect resource for those just entering the field, or as a quick refresher for experienced practitioners. The book leads readers through the specialized language and calculations that comprise the complex world of radar engineering as seen in dozens of state-of-the-art radar systems. An easy to read, wide ranging guide to the world of modern radar systems.

  11. Multidimensional radar picture

    Science.gov (United States)

    Waz, Mariusz

    2010-05-01

    In marine navigation systems, the three-dimensional (3D) visualization is often and often used. Echosonders and sonars working in hydroacustic systems can present pictures in three dimensions. Currently, vector maps also offer 3D presentation. This presentation is used in aviation and underwater navigation. In the nearest future three-dimensional presentation may be obligatory presentation in displays of navigation systems. A part of these systems work with radar and communicates with it transmitting data in a digital form. 3D presentation of radar picture require a new technology to develop. In the first step it is necessary to compile digital form of radar signal. The modern navigation radar do not present data in three-dimensional form. Progress in technology of digital signal processing make it possible to create multidimensional radar pictures. For instance, the RSC (Radar Scan Converter) - digital radar picture recording and transforming tool can be used to create new picture online. Using RSC and techniques of modern computer graphics multidimensional radar pictures can be generated. The radar pictures mentioned should be readable for ECDIS. The paper presents a method for generating multidimensional radar picture from original signal coming from radar receiver.

  12. Spaceborne Radar for Mapping Forest and Land Use Changes

    DEFF Research Database (Denmark)

    Joshi, Neha Pankaj

    of forest monitoring enable the development of policies and measures to alter current trends in global forest and biodiversity loss. This thesis investigates the use of long wavelength (~23 cm, L-band) spaceborne radar, which has all-weather and canopy-penetration capabilities, acquired by the Advanced Land...... Observing Satellite (ALOS) for forest monitoring. Using a combination of local expert knowledge, plot inventories, and data from lidar and optical sensors, it aims to understand (1) whether forest disturbance dynamics may be detected with radar, and (2) what physical and macroecological properties influence...... the radar backscatter and forest AGV/AGB relation. The papers in the thesis show that radar is able to pick up forest disturbances to larger extent than traditional optical-based detection approaches, the radar to AGV/AGB relation is strongly driven by spatial scale of assessments and age- and management...

  13. 光电轴匹配对舰炮跟踪雷达指向精度的影响分析%Analysis of Matching of Optical Axis and Electrical Axis on Pointing Accuracy of Tracking Radar for Naval Gun System

    Institute of Scientific and Technical Information of China (English)

    陈卫华; 娄亮; 陈利锋

    2015-01-01

    本文针对装备支援保障过程中发现的一线操管人员对舰炮跟踪雷达光电轴匹配校准工作了解不多,重视程度不够的问题,从介绍雷达光电轴匹配的概念入手,围绕雷达光电轴匹配的重要意义展开,通过分析光电轴匹配与雷达指向精度关系,给出二者定量关系,强调了光电轴匹配误差对雷达精度,特别是航路捷径前后雷达方位角精度的显著影响,并结合典型真飞航路,对这一结论予以印证,以达到提高部队认识,促进雷达标校工作有效开展的目的。%During the equipment support, we find the operator and administrator is not enough to learn on matching of optical axis and electrical axis of tracking radar for naval gun system, and not enough to take matter seriously. The concept of matching of optical axis and electrical axis and its significance are presented. In this paper, the quantitative relation of matching of optical axis and electrical axis and pointing accuracy of tracking radar is provided. It is emphasized that the influence on radar measurement precision, especially for azimuth accuracy of tracking radar in route shortcut which is induced by matching of optical axis and electrical axis. The conclusion is testified by typical flight route. It will improve the understanding and advance orientation calibration of tracking radar.

  14. The Southern Argentine Agile Meteor Radar (SAAMER)

    Science.gov (United States)

    Janches, Diego

    2014-11-01

    and campaign, operational mode. Results from various radar meteor investigations as well as radar/optical observation campaign will be presented in this paper.

  15. Phased-array radar design application of radar fundamentals

    CERN Document Server

    Jeffrey, Thomas

    2009-01-01

    Phased-Array Radar Design is a text-reference designed for electrical engineering graduate students in colleges and universities as well as for corporate in-house training programs for radar design engineers, especially systems engineers and analysts who would like to gain hands-on, practical knowledge and skills in radar design fundamentals, advanced radar concepts, trade-offs for radar design and radar performance analysis.

  16. Tracing the spatio-temporal evolution of the Merapi 2010 erupted deposits based on object-oriented classification and object-based image analysis of multi-temporal VHR optical and ALOS radar imagery

    Science.gov (United States)

    Thouret, J. C.; Solikhin, A.; Pinel, V.; Kassouk, Z.; Gupta, A.; Liew, S. C.; Oehler, J. F.

    2015-12-01

    We compare the extent to which VHR optical and radar images delineate the eruption impacts and trace the evolution of erupted deposits on active volcanoes. We could identify about 75% of the 2010 Merapi erupted deposits recognized in traditional geological mapping using object-oriented classification and spectral indices on sub-metric GeoEye and Pléiades images. We recognized sixteen PDC depositional units including high-energy surge deposits on the upper south flank, valley-confined BAF deposits channeled in the Gendol River, and overbank BAF with ash-cloud surge deposits on valley margins. We used an innovative method to map PDC and tephra-fall deposits exploiting direct- and cross-polarized L-band SAR data from ALOS-PALSAR before and after the eruption and combining changes in amplitude of the radar signal with temporal decorrelation. Deposits were separated according to increase or decrease in ground backscattering in direct (HH) and cross (HV) polarizations. The maximum likelihood classification applied to ALOS images provided a result consistent with previous studies with 70% classification accuracy for deposits overall. Scatter diagrams of NDWI, NDVI and NDRSI from three VHR images and morphometric analysis of the initial drainage network enabled us to trace the spatio-temporal evolution (2010-2012) of impacted areas against re-vegetation and surficial erosion. In two years after the eruption, the drainage network was fully developed in the upper catchment devastated by high energy surges but far less developped on fans formed by overbank BAF deposits in the middle valley, suggesting the importance of slope gradient and the deposit grain size, permeability and thickness. We updated the Merapi hazard assessment using Pleiades images as the 2010 eruption changed the summit crater morphology and valley channels. Potential sites favorable to future lahar overbank were identified by computing three morphometric parameters of the river channels.

  17. Radar Signature Calculation Facility

    Data.gov (United States)

    Federal Laboratory Consortium — FUNCTION: The calculation, analysis, and visualization of the spatially extended radar signatures of complex objects such as ships in a sea multipath environment and...

  18. Doppler radar physiological sensing

    CERN Document Server

    Lubecke, Victor M; Droitcour, Amy D; Park, Byung-Kwon; Singh, Aditya

    2016-01-01

    Presents a comprehensive description of the theory and practical implementation of Doppler radar-based physiological monitoring. This book includes an overview of current physiological monitoring techniques and explains the fundamental technology used in remote non-contact monitoring methods. Basic radio wave propagation and radar principles are introduced along with the fundamentals of physiological motion and measurement. Specific design and implementation considerations for physiological monitoring radar systems are then discussed in detail. The authors address current research and commercial development of Doppler radar based physiological monitoring for healthcare and other applications.

  19. Combined radar and telemetry system

    Energy Technology Data Exchange (ETDEWEB)

    Rodenbeck, Christopher T.; Young, Derek; Chou, Tina; Hsieh, Lung-Hwa; Conover, Kurt; Heintzleman, Richard

    2017-08-01

    A combined radar and telemetry system is described. The combined radar and telemetry system includes a processing unit that executes instructions, where the instructions define a radar waveform and a telemetry waveform. The processor outputs a digital baseband signal based upon the instructions, where the digital baseband signal is based upon the radar waveform and the telemetry waveform. A radar and telemetry circuit transmits, simultaneously, a radar signal and telemetry signal based upon the digital baseband signal.

  20. Optics

    CERN Document Server

    Fincham, W H A

    2013-01-01

    Optics: Ninth Edition Optics: Ninth Edition covers the work necessary for the specialization in such subjects as ophthalmic optics, optical instruments and lens design. The text includes topics such as the propagation and behavior of light; reflection and refraction - their laws and how different media affect them; lenses - thick and thin, cylindrical and subcylindrical; photometry; dispersion and color; interference; and polarization. Also included are topics such as diffraction and holography; the limitation of beams in optical systems and its effects; and lens systems. The book is recommen

  1. Java Radar Analysis Tool

    Science.gov (United States)

    Zaczek, Mariusz P.

    2005-01-01

    Java Radar Analysis Tool (JRAT) is a computer program for analyzing two-dimensional (2D) scatter plots derived from radar returns showing pieces of the disintegrating Space Shuttle Columbia. JRAT can also be applied to similar plots representing radar returns showing aviation accidents, and to scatter plots in general. The 2D scatter plots include overhead map views and side altitude views. The superposition of points in these views makes searching difficult. JRAT enables three-dimensional (3D) viewing: by use of a mouse and keyboard, the user can rotate to any desired viewing angle. The 3D view can include overlaid trajectories and search footprints to enhance situational awareness in searching for pieces. JRAT also enables playback: time-tagged radar-return data can be displayed in time order and an animated 3D model can be moved through the scene to show the locations of the Columbia (or other vehicle) at the times of the corresponding radar events. The combination of overlays and playback enables the user to correlate a radar return with a position of the vehicle to determine whether the return is valid. JRAT can optionally filter single radar returns, enabling the user to selectively hide or highlight a desired radar return.

  2. Determination of radar MTF

    Energy Technology Data Exchange (ETDEWEB)

    Chambers, D. [Lawrence Livermore National Lab., CA (United States)

    1994-11-15

    The ultimate goal of the Current Meter Array (CMA) is to be able to compare the current patterns detected with the array with radar images of the water surface. The internal wave current patterns modulate the waves on the water surface giving a detectable modulation of the radar cross-section (RCS). The function relating the RCS modulations to the current patterns is the Modulation Transfer Function (MTF). By comparing radar images directly with co-located CMA measurements the MTF can be determined. In this talk radar images and CMA measurements from a recent experiment at Loch Linnhe, Scotland, will be used to make the first direct determination of MTF for an X and S band radar at low grazing angles. The technical problems associated with comparing radar images to CMA data will be explained and the solution method discussed. The results suggest the both current and strain rate contribute equally to the radar modulation for X band. For S band, the strain rate contributes more than the current. The magnitude of the MTF and the RCS modulations are consistent with previous estimates when the wind is blowing perpendicular to the radar look direction.

  3. The Cloud Radar System

    Science.gov (United States)

    Racette, Paul; Heymsfield, Gerald; Li, Lihua; Tian, Lin; Zenker, Ed

    2003-01-01

    Improvement in our understanding of the radiative impact of clouds on the climate system requires a comprehensive view of clouds including their physical dimensions, dynamical generation processes, and detailed microphysical properties. To this end, millimeter vave radar is a powerful tool by which clouds can be remotely sensed. The NASA Goddard Space Flight Center has developed the Cloud Radar System (CRS). CRS is a highly sensitive 94 GHz (W-band) pulsed-Doppler polarimetric radar that is designed to fly on board the NASA high-altitude ER-2 aircraft. The instrument is currently the only millimeter wave radar capable of cloud and precipitation measurements from above most all clouds. Because it operates from high-altitude, the CRS provides a unique measurement perspective for cirrus cloud studies. The CRS emulates a satellite view of clouds and precipitation systems thus providing valuable measurements for the implementation and algorithm validation for the upcoming NASA CloudSat mission that is designed to measure ice cloud distributions on the global scale using a spaceborne 94 GHz radar. This paper describes the CRS instrument and preliminary data from the recent Cirrus Regional Study of Tropical Anvils and Cirrus Layers - Florida Area Cirrus Experiment (CRYSTAL-FACE). The radar design is discussed. Characteristics of the radar are given. A block diagram illustrating functional components of the radar is shown. The performance of the CRS during the CRYSTAL-FACE campaign is discussed.

  4. Smoothing Motion Estimates for Radar Motion Compensation.

    Energy Technology Data Exchange (ETDEWEB)

    Doerry, Armin W. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-07-01

    Simple motion models for complex motion environments are often not adequate for keeping radar data coherent. Eve n perfect motion samples appli ed to imperfect models may lead to interim calculations e xhibiting errors that lead to degraded processing results. Herein we discuss a specific i ssue involving calculating motion for groups of pulses, with measurements only available at pulse-group boundaries. - 4 - Acknowledgements This report was funded by General A tomics Aeronautical Systems, Inc. (GA-ASI) Mission Systems under Cooperative Re search and Development Agre ement (CRADA) SC08/01749 between Sandia National Laboratories and GA-ASI. General Atomics Aeronautical Systems, Inc. (GA-ASI), an affilia te of privately-held General Atomics, is a leading manufacturer of Remotely Piloted Aircraft (RPA) systems, radars, and electro-optic and rel ated mission systems, includin g the Predator(r)/Gray Eagle(r)-series and Lynx(r) Multi-mode Radar.

  5. Engineering Optics

    CERN Document Server

    Iizuka, Keigo

    2008-01-01

    Engineering Optics is a book for students who want to apply their knowledge of optics to engineering problems, as well as for engineering students who want to acquire the basic principles of optics. It covers such important topics as optical signal processing, holography, tomography, holographic radars, fiber optical communication, electro- and acousto-optic devices, and integrated optics (including optical bistability). As a basis for understanding these topics, the first few chapters give easy-to-follow explanations of diffraction theory, Fourier transforms, and geometrical optics. Practical examples, such as the video disk, the Fresnel zone plate, and many more, appear throughout the text, together with numerous solved exercises. There is an entirely new section in this updated edition on 3-D imaging.

  6. Micropower impulse radar imaging

    Energy Technology Data Exchange (ETDEWEB)

    Hall, M.S.

    1995-11-01

    From designs developed at the Lawrence Livermore National Laboratory (LLNL) in radar and imaging technologies, there exists the potential for a variety of applications in both public and private sectors. Presently tests are being conducted for the detection of buried mines and the analysis of civil structures. These new systems use a patented ultra-wide band (impulse) radar technology known as Micropower Impulse Radar (GPR) imaging systems. LLNL has also developed signal processing software capable of producing 2-D and 3-D images of objects embedded in materials such as soil, wood and concrete. My assignment while at LLNL has focused on the testing of different radar configurations and applications, as well as assisting in the creation of computer algorithms which enable the radar to scan target areas of different geometeries.

  7. Principles of modern radar radar applications

    CERN Document Server

    Scheer, James A

    2013-01-01

    Principles of Modern Radar: Radar Applications is the third of the three-volume seriesof what was originally designed to be accomplished in one volume. As the final volumeof the set, it finishes the original vision of a complete yet bounded reference for radartechnology. This volume describes fifteen different system applications or class ofapplications in more detail than can be found in Volumes I or II.As different as the applications described, there is a difference in how these topicsare treated by the authors. Whereas in Volumes I and II there is strict adherence tochapter format and leve

  8. Combined synthetic aperture radar/Landsat imagery

    Science.gov (United States)

    Marque, R. E.; Maurer, H. E.

    1978-01-01

    This paper presents the results of investigations into merging synthetic aperture radar (SAR) and Landsat multispectral scanner (MSS) images using optical and digital merging techniques. The unique characteristics of airborne and orbital SAR and Landsat MSS imagery are discussed. The case for merging the imagery is presented and tradeoffs between optical and digital merging techniques explored. Examples of Landsat and airborne SAR imagery are used to illustrate optical and digital merging. Analysis of the merged digital imagery illustrates the improved interpretability resulting from combining the outputs from the two sensor systems.

  9. Indoor radar SLAM A radar application for vision and GPS denied environments

    NARCIS (Netherlands)

    Marck, J.W.; Mohamoud, A.A.; Houwen, E.H. van de; Heijster, R.M.E.M. van

    2013-01-01

    Indoor navigation especially in unknown areas is a real challenge. Simultaneous Localization and Mapping (SLAM) technology provides a solution. However SLAM as currently based on optical sensors, is unsuitable in vision denied areas, which are for example encountered by first responders. Radar can

  10. Indoor radar SLAM A radar application for vision and GPS denied environments

    NARCIS (Netherlands)

    Marck, J.W.; Mohamoud, A.A.; Houwen, E.H. van de; Heijster, R.M.E.M. van

    2013-01-01

    Indoor navigation especially in unknown areas is a real challenge. Simultaneous Localization and Mapping (SLAM) technology provides a solution. However SLAM as currently based on optical sensors, is unsuitable in vision denied areas, which are for example encountered by first responders. Radar can b

  11. Activities report of the Division of Optical Technology (FOA 33)

    Science.gov (United States)

    Letalick, Dietmar

    1988-11-01

    Research on hydro-optics; laser remote sensing; coherent CO2 laser radar; optical signatures; atmospheric transmission; ionizing radiation effects on electronics; fiber optics; optical processing; and terrain models is summarized.

  12. Winter wheat yield estimation based on multi-source medium resolution optical and radar imaging data and the AquaCrop model using the particle swarm optimization algorithm

    Science.gov (United States)

    Jin, Xiuliang; Li, Zhenhai; Yang, Guijun; Yang, Hao; Feng, Haikuan; Xu, Xingang; Wang, Jihua; Li, Xinchuan; Luo, Juhua

    2017-04-01

    Timely and accurate estimation of winter wheat yield at a regional scale is crucial for national food policy and security assessments. Near-infrared reflectance is not sensitive to the leaf area index (LAI) and biomass of winter wheat at medium to high canopy cover (CC), and most of the vegetation indices displayed saturation phenomenon. However, LAI and biomass at medium to high CC can be efficiently estimated using imaging data from radar with stronger penetration, such as RADARSAT-2. This study had the following three objectives: (i) to combine vegetation indices based on our previous studies for estimating CC and biomass for winter wheat using HJ-1A/B and RADARSAT-2 imaging data; (ii) to combine HJ-1A/B and RADARSAT-2 imaging data with the AquaCrop model using the particle swarm optimization (PSO) algorithm to estimate winter wheat yield; and (iii) to compare the results from the assimilation of HJ-1A/B + RADARSAT-2 imaging data, HJ-1A/B imaging data, and RADARSAT-2 imaging data into the AquaCrop model using the PSO algorithm. Remote sensing data and concurrent LAI, biomass, and yield of sample fields were acquired in Yangling District, Shaanxi, China, during the 2014 winter wheat growing season. The PSO optimization algorithm was used to integrate the AquaCrop model and remote sensing data for yield estimation. The modified triangular vegetation index 2 (MTVI2) × radar vegetation index (RVI) and the enhanced vegetation index (EVI) × RVI had good relationships with CC and biomass, respectively. The results indicated that the predicted and measured yield (R2 = 0.31 and RMSE = 0.94 ton/ha) had agreement when the estimated CC from the HJ-1A/B and RADARSAT-2 data was used as the dynamic input variable for the AquaCrop model. When the estimated biomass from the HJ-1A/B and RADARSAT-2 data was used as the dynamic input variable for the AquaCrop model, the predicted yield showed agreement with the measured yield (R2 = 0.42 and RMSE = 0.81 ton/ha). These results show

  13. Optics

    CERN Document Server

    Fincham, W H A

    2013-01-01

    Optics: Eighth Edition covers the work necessary for the specialization in such subjects as ophthalmic optics, optical instruments and lens design. The text includes topics such as the propagation and behavior of light; reflection and refraction - their laws and how different media affect them; lenses - thick and thin, cylindrical and subcylindrical; photometry; dispersion and color; interference; and polarization. Also included are topics such as diffraction and holography; the limitation of beams in optical systems and its effects; and lens systems. The book is recommended for engineering st

  14. Low level range coverage performance prediction for VHF radar

    Science.gov (United States)

    Kuschel, H.

    1989-09-01

    A VHF radar frequencies the range coverage is not strictly limited by the quasi-optical horizon like at microwave radar frequencies but is extended due to diffraction propagation. This effect, here called beyond-the-horizon (BTH) detection capability is strongly dependent on the propagation path and thus on the terrain structure. The availability of digital terrain maps gives way to the use of computerized methods for the prediction of radar range coverage in real environment. In combination with wave propagation models suitable for diffraction at terrain structures, digital terrain data can even be used for the prediction of BTH target detectability at VHF radar. Here the digital landmass system (DLSS) terrain database was used in combination with a multiple-knife-edge diffraction model to predict the diffraction attenuation between the radar and the potential target positions, especially beyond the optical horizon. The propagation paths extracted from the database are modeled as a sequence of diffraction screens suited for the application of a Fresnel-Kirchhoff algorithm yielding the knife-edge-diffraction attenuation. This terrain related propagation model was verified by a large number of measurements at different frequencies. Implemented in a fast computer system, this prediction model can be used for mission planning of air operations. Considering hostile VHF radar coverage and terrain condition for flight path optimization or, on the other hand it can assist in siting mobile radars for gap filling according to the actual threat situation. Calculations of the diffraction propagation using the prediction model, yield range coverage patterns in real terrain situations, allowing to quantify the BTH detection advantage of VHF radar compared to microwave radar. An experimental large wavelength radar LARA (VHF) built flying targets beyond the close horizon. Here, especially the detection of hiding helicopters by exploiting diffractive wave propagation was examined

  15. Woody savannah tree structural assessment in the greater Kruger National Park region, South Africa, using multi-seasonal polarimetric synthetic aperture radar (SAR) and optical data product approaches

    CSIR Research Space (South Africa)

    Naidoo, L

    2012-11-01

    Full Text Available scattering properties which is essential for building SAR related tree structure relationships. The use of Passive optical sensors alone has also played a role in accurately estimating tree structural parameters (Nichol and Sarker, 2011; Castillo..., J., Field, C.B., 2007. Carnegie Airborne Observatory: in-flight fusion of hyperspectral imaging and waveform light detection and ranging (wLiDAR) for three-dimensional studies of ecosystems. Journal of Applied Remote Sensing, 1 Castillo...

  16. Radar cross section measurements using terahertz waves

    DEFF Research Database (Denmark)

    Iwaszczuk, Krzysztof; Heiselberg, Henning; Jepsen, Peter Uhd

    2010-01-01

    Radar cross sections at terahertz frequencies are measured on scale models of aircrafts. A time domain broadband THz system generates freely propagating THz pulses measured with sub-picosecond time resolution. The THz radiation is generated using fs laser pulses by optical rectification in a lith......Radar cross sections at terahertz frequencies are measured on scale models of aircrafts. A time domain broadband THz system generates freely propagating THz pulses measured with sub-picosecond time resolution. The THz radiation is generated using fs laser pulses by optical rectification...... in a lithium niobate crystal with application of the tilted wave front method, resulting in high electric field THz pulses with a broad band spectrum from 100 GHz up to 4 THz. The corresponding wave lengths are two orders of magnitude smaller than normal radars and we therefore use scale models of size 5-10 cm...... in order to measure realistic radar cross sections. RCS polar and azimuthal angle plots of F-16 and F-35 are presented....

  17. Radar cross section

    CERN Document Server

    Knott, Gene; Tuley, Michael

    2004-01-01

    This is the second edition of the first and foremost book on this subject for self-study, training, and course work. Radar cross section (RCS) is a comparison of two radar signal strengths. One is the strength of the radar beam sweeping over a target, the other is the strength of the reflected echo sensed by the receiver. This book shows how the RCS ?gauge? can be predicted for theoretical objects and how it can be measured for real targets. Predicting RCS is not easy, even for simple objects like spheres or cylinders, but this book explains the two ?exact? forms of theory so well that even a

  18. Radar and electronic navigation

    CERN Document Server

    Sonnenberg, G J

    2013-01-01

    Radar and Electronic Navigation, Sixth Edition discusses radar in marine navigation, underwater navigational aids, direction finding, the Decca navigator system, and the Omega system. The book also describes the Loran system for position fixing, the navy navigation satellite system, and the global positioning system (GPS). It reviews the principles, operation, presentations, specifications, and uses of radar. It also describes GPS, a real time position-fixing system in three dimensions (longitude, latitude, altitude), plus velocity information with Universal Time Coordinated (UTC). It is accur

  19. Wind Profiling Radar

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Clutter present in radar return signals as used for wind profiling is substantially removed by carrying out a Daubechies wavelet transformation on a time series of...

  20. Imaging Radar Polarimetry

    Science.gov (United States)

    vanZyl, J. J.; Zebker, H. A.

    1993-01-01

    In this paper, we review the state of the art in imaging radar polarimetry, examine current developments in sensor technology and implementation for recording polarimetric measurements, and describe techniques and areas of application for the new remote sensing data.

  1. Radar Landmass Simulation Computer Programming (Interim Report).

    Science.gov (United States)

    RADAR SCANNING, TERRAIN), (*NAVAL TRAINING, RADAR OPERATORS), (*FLIGHT SIMULATORS, TERRAIN AVOIDANCE), (* COMPUTER PROGRAMMING , INSTRUCTION MANUALS), PLAN POSITION INDICATORS, REAL TIME, DISPLAY SYSTEMS, RADAR IMAGES, SIMULATION

  2. Integration of Optical and Synthetic Aperture Radar Imagery for Improving Crop Mapping in Northwestern Benin, West Africa

    Directory of Open Access Journals (Sweden)

    Gerald Forkuor

    2014-07-01

    Full Text Available Crop mapping in West Africa is challenging, due to the unavailability of adequate satellite images (as a result of excessive cloud cover, small agricultural fields and a heterogeneous landscape. To address this challenge, we integrated high spatial resolution multi-temporal optical (RapidEye and dual polarized (VV/VH SAR (TerraSAR-X data to map crops and crop groups in northwestern Benin using the random forest classification algorithm. The overall goal was to ascertain the contribution of the SAR data to crop mapping in the region. A per-pixel classification result was overlaid with vector field boundaries derived from image segmentation, and a crop type was determined for each field based on the modal class within the field. A per-field accuracy assessment was conducted by comparing the final classification result with reference data derived from a field campaign. Results indicate that the integration of RapidEye and TerraSAR-X data improved classification accuracy by 10%–15% over the use of RapidEye only. The VV polarization was found to better discriminate crop types than the VH polarization. The research has shown that if optical and SAR data are available for the whole cropping season, classification accuracies of up to 75% are achievable.

  3. Downhole pulse radar

    Science.gov (United States)

    Chang, Hsi-Tien

    1987-09-28

    A borehole logging tool generates a fast rise-time, short duration, high peak-power radar pulse having broad energy distribution between 30 MHz and 300 MHz through a directional transmitting and receiving antennas having barium titanate in the electromagnetically active region to reduce the wavelength to within an order of magnitude of the diameter of the antenna. Radar returns from geological discontinuities are sampled for transmission uphole. 7 figs.

  4. Doppler micro sense and avoid radar

    Science.gov (United States)

    Gorwara, Ashok; Molchanov, Pavlo; Asmolova, Olga

    2015-10-01

    There is a need for small Sense and Avoid (SAA) systems for small and micro Unmanned Aerial Systems (UAS) to avoid collisions with obstacles and other aircraft. The proposed SAA systems will give drones the ability to "see" close up and give them the agility to maneuver through tight areas. Doppler radar is proposed for use in this sense and avoid system because in contrast to optical or infrared (IR) systems Doppler can work in more harsh conditions such as at dusk, and in rain and snow. And in contrast to ultrasound based systems, Doppler can better sense small sized obstacles such as wires and it can provide a sensing range from a few inches to several miles. An SAA systems comprised of Doppler radar modules and an array of directional antennas that are distributed around the perimeter of the drone can cover the entire sky. These modules are designed so that they can provide the direction to the obstacle and simultaneously generate an alarm signal if the obstacle enters within the SAA system's adjustable "Protection Border". The alarm signal alerts the drone's autopilot to automatically initiate an avoidance maneuver. A series of Doppler radar modules with different ranges, angles of view and transmitting power have been designed for drones of different sizes and applications. The proposed Doppler radar micro SAA system has simple circuitry, works from a 5 volt source and has low power consumption. It is light weight, inexpensive and it can be used for a variety of small unmanned aircraft.

  5. A barrier radar concept

    Science.gov (United States)

    Marshall, J.; Ball, C.; Weissman, I.

    A description is given of a low power, light-weight radar that can be quickly set up and operated on batteries for extended periods of time to detect airborne intruders. With low equipment and operating costs, it becomes practical to employ a multiplicity of such radars to provide an unbroken intrusion fence over the desired perimeter. Each radar establishes a single transmitted fan beam extending vertically from horizon to horizon. The beam is generated by a two-face array antenna built in an A-frame configuration and is shaped, through phasing of the array elements, to concentrate the transmitter power in a manner consistent with the expected operating altitude ceiling of the targets of interest. The angular width of this beam in the dimension transverse to the fan depends on the radar transmission frequency and the antenna aperture dimension, but is typically wide enough so that a target at the maximum altitude or range will require tens of seconds to pass through the beam. A large number of independent samples of radar data will thus be available to provide many opportunities for target detection.

  6. Development and application of millimeter-wave imaging radar

    Energy Technology Data Exchange (ETDEWEB)

    Mase, Atsushi; Kogi, Yuichiro; Yamamoto, Akihide; Ohashi, Masamichi; Osako, Shuhei [Kyushu Univ., Advanced Science and Technology Center for Cooperative Research, Kasuga, Fukuoka (Japan); Bruskin, Leonid G. [Japan Atomic Energy Research Inst., Naka, Ibaraki (Japan). Naka Fusion Research Establishment; Hojo, Hitoshi [Tsukuba Univ., Plasma Research Center, Tsukuba, Ibaraki (Japan)

    2002-05-01

    Significant advances in microwave and millimeter wave technology have enabled the development of a new generation of imaging diagnostics in this frequency region. Millimeter wave imaging radar is expected to be one of the most promising diagnostic methods for this purpose. It consists of a frequency-modulated continuous wave or pulsed wave as a probe beam and quasi-optical focusing optics followed by a planar-type detector array. We have started to develop a diagnostic system for the achievement of imaging radar. Representative experimental results obtained with related diagnostic systems are presented. (author)

  7. Airport Surveillance Radar : Model 8 -

    Data.gov (United States)

    Department of Transportation — The Airport Surveillance Radar Model 8 (ASR-8) is a short-range (60 nautical mile (nmi)), analog radar system used to detect and report the presence and location of...

  8. Airport Surveillance Radar : Model 7 -

    Data.gov (United States)

    Department of Transportation — The Airport Surveillance Radar Model 7 (ASR-7) is a short-range (60 nautical miles (nmi)) analog radar system used to detect and report the presence and location of...

  9. Radar for tracer particles

    CERN Document Server

    Ott, Felix; Huang, Kai

    2016-01-01

    We introduce a radar system capable of tracking a $5$mm spherical target continuously in three dimensions. The $10$GHz (X-band) radar system has a transmission power of $1$W and operates in the near field of the horn antennae. By comparing the phase shift of the electromagnetic wave traveling through the free space with an IQ-Mixer, we obtain the relative movement of the target with respect to the antennae. From the azimuth and inclination angles of the receiving antennae obtained in the calibration, we reconstruct the target trajectory in a three-dimensional Cartesian system. Finally, we test the tracking algorithm with target moving in circular as well as in pendulum motions, and discuss the capability of the radar system.

  10. 3D Visualization of Radar Backscattering Diagrams Based on OpenGL

    Science.gov (United States)

    Zhulina, Yulia V.

    2004-12-01

    A digital method of calculating the radar backscattering diagrams is presented. The method uses a digital model of an arbitrary scattering object in the 3D graphics package "OpenGL" and calculates the backscattered signal in the physical optics approximation. The backscattering diagram is constructed by means of rotating the object model around the radar-target line.

  11. The physical basis for estimating wave-energy spectra with the radar ocean-wave spectrometer

    Science.gov (United States)

    Jackson, Frederick C.

    1987-01-01

    The derivation of the reflectivity modulation spectrum of the sea surface for near-nadir-viewing microwave radars using geometrical optics is described. The equations required for the derivation are presented. The derived reflectivity modulation spectrum provides data on the physical basis of the radar ocean-wave spectrometer measurements of ocean-wave directional spectra.

  12. Localizing Ground-Penetrating Radar

    Science.gov (United States)

    2014-11-01

    ing Ground-Penetrating Radar (LGPR) uses very high frequency (VHF) radar reflections of underground features to generate base- line maps and then...Innovative ground- penetrating radar that maps underground geological features provides autonomous vehicles with real-time localization. Localizing...NOV 2014 2. REPORT TYPE 3. DATES COVERED 00-00-2014 to 00-00-2014 4. TITLE AND SUBTITLE Localizing Ground-Penetrating Radar 5a. CONTRACT NUMBER

  13. Mode S Baseline Radar Tracking.

    Science.gov (United States)

    1982-11-01

    range units and 20 azimuth units) overlaying the position of the beacon reports. In the cases analyzed where beacon reports were not radar reinforced ...82/53 j~ C ~ 7 C _ _ _ _ _ _ 4. Title end Su.btitle 5. Neget at. November 1982 MDDE S BASELINE RADAR TRACKIN4G 6. Poelin Orgeuianti.. Cede ACT-100...Ground Clutter 33 Mode S/ARTS III 100-Scan False Radar Track Summary 74 34 Percent Beacon Radar Reinforcement 77 vii INTRODUCTION PURPOSE. The purpose of

  14. Systems and Methods for Radar Data Communication

    Science.gov (United States)

    Bunch, Brian (Inventor); Szeto, Roland (Inventor); Miller, Brad (Inventor)

    2013-01-01

    A radar information processing system is operable to process high bandwidth radar information received from a radar system into low bandwidth radar information that may be communicated to a low bandwidth connection coupled to an electronic flight bag (EFB). An exemplary embodiment receives radar information from a radar system, the radar information communicated from the radar system at a first bandwidth; processes the received radar information into processed radar information, the processed radar information configured for communication over a connection operable at a second bandwidth, the second bandwidth lower than the first bandwidth; and communicates the radar information from a radar system, the radar information communicated from the radar system at a first bandwidth.

  15. Noise Radar Technology Basics

    Science.gov (United States)

    2006-12-01

    poursuite, estimation Doppler, polarimétrie, interférométrie, sondage du sol ou profilage de la sous- surface , détection, imagerie SAR (radar à synthèse...mesure de distance et d’estimation Doppler. Deux récepteurs de traitement cohérent, soit le récepteur de corrélation et le récep- teur de traitement DSP... traitement spectral double) des échos radar sont décrits et une estimation de leur portée est présentée. Les capacités LPI (faible probabilité

  16. Ground penetrating radar

    CERN Document Server

    Daniels, David J

    2004-01-01

    Ground-penetrating radar has come to public attention in recent criminal investigations, but has actually been a developing and maturing remote sensing field for some time. In the light of recent expansion of the technique to a wide range of applications, the need for an up-to-date reference has become pressing. This fully revised and expanded edition of the best-selling Surface-Penetrating Radar (IEE, 1996) presents, for the non-specialist user or engineer, all the key elements of this technique, which span several disciplines including electromagnetics, geophysics and signal processing. The

  17. Human walking estimation with radar

    NARCIS (Netherlands)

    Dorp, Ph. van; Groen, F.C.A.

    2003-01-01

    Radar can be used to observe humans that are obscured by objects such as walls. These humans cannot be visually observed. The radar measurements are used to animate an obscured human in virtual reality. This requires detailed information about the motion. The radar measurements give detailed informa

  18. Radar Test Range Design Considerations.

    Science.gov (United States)

    1980-04-29

    radar cross section associated with dihedral and trihedral corner reflectors is highly dependent upon the squareness or alignment of the...slightly misaligned. We now show how the radar cross section for dihedral and trihedral corner reflectors depends upon their surface misalignment. All...coefficients, p and q, for the dihedral corner reflector , one must consider the radar cross section

  19. Status Of Imaging Radar Polarimetry

    Science.gov (United States)

    Van Zyl, Jakob J.; Zebker, Howard A.

    1991-01-01

    Report pulls together information on imaging radar polarimetry from a variety of sources. Topics include theory, equipment, and experimental data. Reviews state of the art, examines current applicable developments in radar equipment, describes recording and processing of radar polarimetric measurements, and discusses interpretation and application of resulting polarimetric images.

  20. Human walking estimation with radar

    NARCIS (Netherlands)

    Dorp, Ph. van; Groen, F.C.A.

    2003-01-01

    Radar can be used to observe humans that are obscured by objects such as walls. These humans cannot be visually observed. The radar measurements are used to animate an obscured human in virtual reality. This requires detailed information about the motion. The radar measurements give detailed

  1. Coded continuous wave meteor radar

    OpenAIRE

    2015-01-01

    The concept of coded continuous wave meteor radar is introduced. The radar uses a continuously transmitted pseudo-random waveform, which has several advantages: coding avoids range aliased echoes, which are often seen with commonly used pulsed specular meteor radars (SMRs); continuous transmissions maximize pulse compression gain, allowing operation with significantly lower peak transmit power; the temporal resolution can be changed after ...

  2. Detection of space debris with VLBI radar technique

    Science.gov (United States)

    Molotov, I.; Konovalenko, A.; Agapov, V.; Sochilina, A.; Lipatov, B.; Molotov, E.; Gorshenkov, Y.

    The possibility of Evpatoria RT-70 planetary radar application for space debris research was tested in two trial experiments for targets at geostationary (GEO) and high-elliptic (HEO) orbits in 2001. The RT-70 has the 200 kW continuous power transmitter at 6-cm wavelength, which was used for radio location of planets. Therefore the bistatic radar system only may be realized for orbital object measurements. The receiving antennas (Bear Lakes RT-64, Svetloe RT-32, Noto RT- 32, Torun RT-32 and Urumqi RT-25) used the standard VLBI equipment for recording of echo-signals, because they have not specialized radar apparatus. Such multi-antennas configuration allows to add the classic radar data with VLBI measurements: radar has the resolution for range and radial velocity, VLBI provides the angle and angular rate. Moreover the VLBI radar may be a tool for 3D- measurements: combination of radar map and VLBI image can result the "radio holography" picture of investigated object. Seven GEO objects were detected in May session and four GEO + two HEO objects - in December session. The uncontrolled axial rotation with 5 - 20 s period was fixed for GEO targets. The first results of processing that carry out at Russia and Canada are presented. It is planned to finally adjust the VLBI radar method and t o start the regular observations under the international program of optical and radar monitoring of the near-Earth space environment that will be partially supported by INTAS-01-0669, RFBR-02-02- 17568 and RFBR-02-02-3108.

  3. 18th International Laser Radar Conference

    CERN Document Server

    Neuber, Roland; Rairoux, Patrick; Wandinger, Ulla

    1997-01-01

    Lidar or laser radar, the depth-resolved remote measurement of atmospheric parameters with optical means, has become an important tool in the field of atmospheric and environmental remote sensing. In this volume the latest progress in the development of lidar methods, experiments, and applications is described. The content is based on selected and thoroughly refereed papers presented at the 18th International Laser Radar Conference, Berlin, 22-26 July 1996. The book is divided into six parts which cover the topics of tropospheric aerosols and clouds, lidar in space, wind, water vapor, troposheric trace gases and plumes, and stratospheric and mesospheric profiling. As a supplement to fundamental lidar textbooks this volume may serve as a guide for scientists, engineers, and graduate students through the blossoming field of modern lidar techniques and their contribution to atmospheric and environmental research.

  4. The Newcastle meteor radar

    Science.gov (United States)

    Keay, Colin

    1987-01-01

    A brief history and development of the Newcastle Meteor Radar system is given. Also described are its geographical coordinates and its method of operation. The initial objective when the project was commenced was to develop an entirely digital analyzer capable of recognizing meteor echo signals and recording as many of their parameters as possible. This objective was achieved.

  5. Compressive CFAR radar detection

    NARCIS (Netherlands)

    Anitori, L.; Otten, M.P.G.; Rossum, W.L. van; Maleki, A.; Baraniuk, R.

    2012-01-01

    In this paper we develop the first Compressive Sensing (CS) adaptive radar detector. We propose three novel architectures and demonstrate how a classical Constant False Alarm Rate (CFAR) detector can be combined with ℓ1-norm minimization. Using asymptotic arguments and the Complex Approximate Messag

  6. Compressive CFAR Radar Processing

    NARCIS (Netherlands)

    Anitori, L.; Rossum, W.L. van; Otten, M.P.G.; Maleki, A.; Baraniuk, R.

    2013-01-01

    In this paper we investigate the performance of a combined Compressive Sensing (CS) Constant False Alarm Rate (CFAR) radar processor under different interference scenarios using both the Cell Averaging (CA) and Order Statistic (OS) CFAR detectors. Using the properties of the Complex Approximate Mess

  7. Synthetic Aperture Radar Interferometry

    Science.gov (United States)

    Rosen, P. A.; Hensley, S.; Joughin, I. R.; Li, F.; Madsen, S. N.; Rodriguez, E.; Goldstein, R. M.

    1998-01-01

    Synthetic aperture radar interferometry is an imaging technique for measuring the topography of a surface, its changes over time, and other changes in the detailed characteristics of the surface. This paper reviews the techniques of interferometry, systems and limitations, and applications in a rapidly growing area of science and engineering.

  8. Spaceborne Radar Study

    Science.gov (United States)

    1974-06-28

    via either the oomm beam or the omnichannel . Satellite instrumentation data are sent to the ground station following every radar signal transmission...If comm beam contact is lost, the instrumentation data are sent via the omnichannel transmitter on command of the ground station. There are six ways

  9. Algorithm for Fast Registration of Radar Images

    Directory of Open Access Journals (Sweden)

    Subrata Rakshit

    2002-07-01

    Full Text Available Radar imagery provides an all-weather and 24 h coverage, making it ideal for critical defence applications. In some applications, multiple images acquired of an area need to be registered for further processing. Such situations arise for battlefield surveillance based on satellite imagery. The registration has to be done between an earlier (reference image and a new (live image. For automated surveillance, registration is a prerequisite for change detection. Speed is essential due to large volumes of data involved and the need for quick responses. The registration transformation is quite simple, being mainly a global translation. (Scale and rotation corrections can be applied based on known camera parameters. The challenge lies in the fact that the radar images are not as feature-rich as optical images and the image content variation can be as high as 90 per cent. Even though the change on the ground may not be drastic, seasonal variations can significantly alter the radar signatures of ground, vegetation, and water bodies. This necessitates a novel approach different from the techniques developed for optical images. An algorithm has been developed that leads to fast registration of radar images, even in the presence of specular noise and significant scene content variation. The key features of this approach are adaptability to sensor/terrain types, ability to handle large content variations and false positive rejection. The present work shows that this algorithm allows for various cost-performance trade-offs, making it suitable for a wide variety of applications. The algorithm, in various cost-performance configurations, is tested on a set of ERS images. Results of such tests have been reported, indicating the performance of the algorithm for various cost-performance trade-offs.

  10. Space Radar Image of Bahia

    Science.gov (United States)

    1994-01-01

    This is a color composite image of southern Bahia, Brazil, centered at 15.22 degree south latitude and 39.07 degrees west longitude. The image was acquired by the Spaceborne Imaging Radar-C/X-band Synthetic Aperture Radar aboard the space shuttle Endeavour on its 38th orbit of Earth on October 2, 1994. The image covers an area centered over the Una Biological Reserve, one the largest protected areas in northeastern Brazil. The 7,000-hectare reserve is administered by the Brazilian Institute for the Environment and is part of the larger Atlantic coastal forest, a narrow band of rain forest extending along the eastern coast of Brazil. The Atlantic coastal forest of southern Bahia is one of the world's most threatened and diverse ecosystems. Due to widespread settlement, only 2 to 5 percent of the original forest cover remains. Yet the region still contains an astounding variety of plants and animals, including a large number of endemic species. More than half of the region's tree species and 80 percent of its animal species are indigenous and found nowhere else on Earth. The Una Reserve is also the only federally protected habitat for the golden-headed lion tamarin, the yellow-breasted capuchin monkey and many other endangered species. In the past few years, scientists from Brazilian and international conservation organizations have coordinated efforts to study the biological diversity of this region and to develop practical and economically viable options for preserving the remaining primary forests in southern Bahia. The shuttle imaging radar is used in this study to identify various land uses and vegetation types, including remaining patches of primary forest, cabruca forest (cacao planted in the understory of the native forest), secondary forest, pasture and coastal mangrove. Standard remote-sensing technology that relies on light reflected from the forest canopy cannot accurately distinguish between cabruca and undisturbed forest. Optical remote sensing is also

  11. Laser radar technology and applications; Proceedings of the Meeting, Quebec, Canada, June 3-5, 1986

    Science.gov (United States)

    Cruickshank, James M.; Harney, Robert C.

    1986-01-01

    Various papers on laser radar technology and applications are presented. The topics considered include: eye-safe solid lasers for lidar applications, practical DF laser for ranging applications, ultrafast surface barrier photodetectors, performance analyses for peak-detecting laser radars, multiple scattering for laser beams propagating in a layered atmosphere, laser radar cross section of objects immersed in the earth's atmosphere, measurements of pulse coherence in mode-locked TEA-CO2 lasers, and single longitudinal mode operation of a continuously tunable high pressure TE-CO2. Also discussed are: amplitude-modulated laser system for distance and displacement measurement, minilaser rangefinder, laser docking system radar flight experiment, improved optical resonator for laser radars, design of frequency-stable TEA-CO2 lasers, HgCdTe photodiodes for heterodyne applications, acoustooptic spectrum analyzer for laser radar applications, laser cloud mapper and its applications, scanning lidar bathymeter for water depth measurement, and fluorescence lidar for land and sea remote sensing.

  12. An MSK Radar Waveform

    Science.gov (United States)

    Quirk, Kevin J.; Srinivasan, Meera

    2012-01-01

    The minimum-shift-keying (MSK) radar waveform is formed by periodically extending a waveform that separately modulates the in-phase and quadrature- phase components of the carrier with offset pulse-shaped pseudo noise (PN) sequences. To generate this waveform, a pair of periodic PN sequences is each passed through a pulse-shaping filter with a half sinusoid impulse response. These shaped PN waveforms are then offset by half a chip time and are separately modulated on the in-phase and quadrature phase components of an RF carrier. This new radar waveform allows an increase in radar resolution without the need for additional spectrum. In addition, it provides self-interference suppression and configurable peak sidelobes. Compared strictly on the basis of the expressions for delay resolution, main-lobe bandwidth, effective Doppler bandwidth, and peak ambiguity sidelobe, it appears that bi-phase coded (BPC) outperforms the new MSK waveform. However, a radar waveform must meet certain constraints imposed by the transmission and reception of the modulation, as well as criteria dictated by the observation. In particular, the phase discontinuity of the BPC waveform presents a significant impediment to the achievement of finer resolutions in radar measurements a limitation that is overcome by using the continuous phase MSK waveform. The phase continuity, and the lower fractional out-of-band power of MSK, increases the allowable bandwidth compared with BPC, resulting in a factor of two increase in the range resolution of the radar. The MSK waveform also has been demonstrated to have an ambiguity sidelobe structure very similar to BPC, where the sidelobe levels can be decreased by increasing the length of the m-sequence used in its generation. This ability to set the peak sidelobe level is advantageous as it allows the system to be configured to a variety of targets, including those with a larger dynamic range. Other conventionally used waveforms that possess an even greater

  13. The Southern Argentina Agile Meteor Radar (SAAMER): Platform for comprehensive meteor radar observations and studies

    Science.gov (United States)

    Janches, D.; Hormaechea, J.; Pifko, S.; Hocking, W.; Fritts, D.; Brunini, C.; Close, S.; Michell, R.; Samara, M.

    2014-07-01

    pole to approximately 30°N, and thus enable a detailed study of showers at high southern latitudes (e.g., July Phoenicids or Puppids complex), which are unobservable from the CMOR's location. Finally, SAAMER is ideal for the deployment of complementary instrumentation in both permanent and campaign operational modes. Results from various radar meteor investigations as well as radar/optical observation campaigns will be presented in this paper.

  14. Radar cross-sectional study using noise radar

    Science.gov (United States)

    Freundorfer, A. P.; Siddiqui, J. Y.; Antar, Y. M. M.

    2015-05-01

    A noise radar system is proposed with capabilities to measure and acquire the radar cross-section (RCS) of targets. The proposed system can cover a noise bandwidth of near DC to 50 GHz. The noise radar RCS measurements were conducted for selective targets like spheres and carpenter squares with and without dielectric bodies for a noise band of 400MHz-5000MHz. The bandwidth of operation was limited by the multiplier and the antennae used.

  15. Netted LPI RADARs

    Science.gov (United States)

    2011-09-01

    easier and, since they cover most of the space around the antenna, can expose it easily at various bearings ). Typical sidelobe levels for conventional...modern radar systems results in an electro- magnetic environment where the receiver should expect very few pulses. Staggered PRF and frequency agility...detector, a logarithmic amplitude compressor , and a signal encoder. All subunits are digitally controlled by computer as to frequency, sweep rate, and

  16. Imaging synthetic aperture radar

    Science.gov (United States)

    Burns, Bryan L.; Cordaro, J. Thomas

    1997-01-01

    A linear-FM SAR imaging radar method and apparatus to produce a real-time image by first arranging the returned signals into a plurality of subaperture arrays, the columns of each subaperture array having samples of dechirped baseband pulses, and further including a processing of each subaperture array to obtain coarse-resolution in azimuth, then fine-resolution in range, and lastly, to combine the processed subapertures to obtain the final fine-resolution in azimuth. Greater efficiency is achieved because both the transmitted signal and a local oscillator signal mixed with the returned signal can be varied on a pulse-to-pulse basis as a function of radar motion. Moreover, a novel circuit can adjust the sampling location and the A/D sample rate of the combined dechirped baseband signal which greatly reduces processing time and hardware. The processing steps include implementing a window function, stabilizing either a central reference point and/or all other points of a subaperture with respect to doppler frequency and/or range as a function of radar motion, sorting and compressing the signals using a standard fourier transforms. The stabilization of each processing part is accomplished with vector multiplication using waveforms generated as a function of radar motion wherein these waveforms may be synthesized in integrated circuits. Stabilization of range migration as a function of doppler frequency by simple vector multiplication is a particularly useful feature of the invention; as is stabilization of azimuth migration by correcting for spatially varying phase errors prior to the application of an autofocus process.

  17. The Radar Roadmap

    Science.gov (United States)

    2013-01-01

    LIMITATION OF ABSTRACT Same as Report ( SAR ) 18. NUMBER OF PAGES 25 19a. NAME OF RESPONSIBLE PERSON a. REPORT unclassified b. ABSTRACT unclassified c...ABSTRACT Same as Report ( SAR ) 18. NUMBER OF PAGES 25 19a. NAME OF RESPONSIBLE PERSON a. REPORT unclassified b. ABSTRACT unclassified c. THIS PAGE...object bistatic radars. The former allows high resolution without the use of pulse compression techniques and the latter promises cheaper systems by

  18. Radar clutter classification

    Science.gov (United States)

    Stehwien, Wolfgang

    1989-11-01

    The problem of classifying radar clutter as found on air traffic control radar systems is studied. An algorithm based on Bayes decision theory and the parametric maximum a posteriori probability classifier is developed to perform this classification automatically. This classifier employs a quadratic discriminant function and is optimum for feature vectors that are distributed according to the multivariate normal density. Separable clutter classes are most likely to arise from the analysis of the Doppler spectrum. Specifically, a feature set based on the complex reflection coefficients of the lattice prediction error filter is proposed. The classifier is tested using data recorded from L-band air traffic control radars. The Doppler spectra of these data are examined; the properties of the feature set computed using these data are studied in terms of both the marginal and multivariate statistics. Several strategies involving different numbers of features, class assignments, and data set pretesting according to Doppler frequency and signal to noise ratio were evaluated before settling on a workable algorithm. Final results are presented in terms of experimental misclassification rates and simulated and classified plane position indicator displays.

  19. Nordic Snow Radar Experiment

    Science.gov (United States)

    Lemmetyinen, Juha; Kontu, Anna; Pulliainen, Jouni; Vehviläinen, Juho; Rautiainen, Kimmo; Wiesmann, Andreas; Mätzler, Christian; Werner, Charles; Rott, Helmut; Nagler, Thomas; Schneebeli, Martin; Proksch, Martin; Schüttemeyer, Dirk; Kern, Michael; Davidson, Malcolm W. J.

    2016-09-01

    The objective of the Nordic Snow Radar Experiment (NoSREx) campaign was to provide a continuous time series of active and passive microwave observations of snow cover at a representative location of the Arctic boreal forest area, covering a whole winter season. The activity was a part of Phase A studies for the ESA Earth Explorer 7 candidate mission CoReH2O (Cold Regions Hydrology High-resolution Observatory). The NoSREx campaign, conducted at the Finnish Meteorological Institute Arctic Research Centre (FMI-ARC) in Sodankylä, Finland, hosted a frequency scanning scatterometer operating at frequencies from X- to Ku-band. The radar observations were complemented by a microwave dual-polarization radiometer system operating from X- to W-bands. In situ measurements consisted of manual snow pit measurements at the main test site as well as extensive automated measurements on snow, ground and meteorological parameters. This study provides a summary of the obtained data, detailing measurement protocols for each microwave instrument and in situ reference data. A first analysis of the microwave signatures against snow parameters is given, also comparing observed radar backscattering and microwave emission to predictions of an active/passive forward model. All data, including the raw data observations, are available for research purposes through the European Space Agency and the Finnish Meteorological Institute. A consolidated dataset of observations, comprising the key microwave and in situ observations, is provided through the ESA campaign data portal to enable easy access to the data.

  20. Detection of Weather Radar Clutter

    DEFF Research Database (Denmark)

    Bøvith, Thomas

    2008-01-01

    Weather radars provide valuable information on precipitation in the atmosphere but due to the way radars work, not only precipitation is observed by the weather radar. Weather radar clutter, echoes from non-precipitating targets, occur frequently in the data, resulting in lowered data quality....... Especially in the application of weather radar data in quantitative precipitation estimation and forecasting a high data quality is important. Clutter detection is one of the key components in achieving this goal. This thesis presents three methods for detection of clutter. The methods use supervised...... and precipitating and non-precipitating clouds. Another method uses the difference in the motion field of clutter and precipitation measured between two radar images. Furthermore, the direction of the wind field extracted from a weather model is used. The third method uses information about the refractive index...

  1. FMWC Radar for Breath Detection

    DEFF Research Database (Denmark)

    Suhr, Lau Frejstrup; Tafur Monroy, Idelfonso; Vegas Olmos, Juan José

    We report on the experimental demonstration of an FMCW radar operating in the 25.7 - 26.6 GHz range with a repetition rate of 500 sweeps per second. The radar is able to track the breathing rate of an adult human from a distance of 1 meter. The experiments have utilized a 50 second recording window...... to accurately track the breathing rate. The radar utilizes a saw tooth modulation format and a low latency receiver. A breath tracking radar is useful both in medical scenarios, diagnosing disorders such as sleep apnea, and for home use where the user can monitor its health. Breathing is a central part of every...... radar chip which, through the use of a simple modulation scheme, is able to measure the breathing rate of an adult human from a distance. A high frequency output makes sure that the radar cannot penetrate solid obstacles which is a wanted feature in private homes where people therefore cannot measure...

  2. Radar techniques using array antennas

    CERN Document Server

    Wirth, Wulf-Dieter

    2013-01-01

    Radar Techniques Using Array Antennas is a thorough introduction to the possibilities of radar technology based on electronic steerable and active array antennas. Topics covered include array signal processing, array calibration, adaptive digital beamforming, adaptive monopulse, superresolution, pulse compression, sequential detection, target detection with long pulse series, space-time adaptive processing (STAP), moving target detection using synthetic aperture radar (SAR), target imaging, energy management and system parameter relations. The discussed methods are confirmed by simulation stud

  3. Optimal frequency selection of multi-channel O2-band different absorption barometric radar for air pressure measurements

    Science.gov (United States)

    Lin, Bing; Min, Qilong

    2017-02-01

    Through theoretical analysis, optimal selection of frequencies for O2 differential absorption radar systems on air pressure field measurements is achieved. The required differential absorption optical depth between a radar frequency pair is 0.5. With this required value and other considerations on water vapor absorption and the contamination of radio wave transmission, frequency pairs of present considered radar system are obtained. Significant impacts on general design of differential absorption remote sensing systems are expected from current results.

  4. Reconfigurable L-Band Radar

    Science.gov (United States)

    Rincon, Rafael F.

    2008-01-01

    The reconfigurable L-Band radar is an ongoing development at NASA/GSFC that exploits the capability inherently in phased array radar systems with a state-of-the-art data acquisition and real-time processor in order to enable multi-mode measurement techniques in a single radar architecture. The development leverages on the L-Band Imaging Scatterometer, a radar system designed for the development and testing of new radar techniques; and the custom-built DBSAR processor, a highly reconfigurable, high speed data acquisition and processing system. The radar modes currently implemented include scatterometer, synthetic aperture radar, and altimetry; and plans to add new modes such as radiometry and bi-static GNSS signals are being formulated. This development is aimed at enhancing the radar remote sensing capabilities for airborne and spaceborne applications in support of Earth Science and planetary exploration This paper describes the design of the radar and processor systems, explains the operational modes, and discusses preliminary measurements and future plans.

  5. Coherent laser radar at 3.6 microm.

    Science.gov (United States)

    Hanson, Frank; Lasher, Mark

    2002-12-20

    Coherent laser radar systems in the mid-IR wavelength region can have advantages in low-altitude environment because they are less sensitive to scattering, turbulence, and humidity, which can affect shorter- or longer-wavelength system. We describe a coherent laser radar at 3.6 microm based on a single-frequency optical parametric oscillator and demonstrate the system over short ranges outdoors. The system was used to make micro-Doppler measurements from idling trucks that were processed to give surface vibration spectra.

  6. Removing interfering clutter associated with radar pulses that an airborne radar receives from a radar transponder

    Science.gov (United States)

    Ormesher, Richard C.; Axline, Robert M.

    2008-12-02

    Interfering clutter in radar pulses received by an airborne radar system from a radar transponder can be suppressed by developing a representation of the incoming echo-voltage time-series that permits the clutter associated with predetermined parts of the time-series to be estimated. These estimates can be used to estimate and suppress the clutter associated with other parts of the time-series.

  7. Radar foundations for imaging and advanced concepts

    CERN Document Server

    Sullivan, Roger

    2004-01-01

    Through courses internally taught at IDA, Dr. Roger Sullivan has devised a book that brings readers fully up to speed on the most essential quantitave aspects of general radar in order to introduce study of the most exciting and relevant applications to radar imaging and advanced concepts: Synthetic Aperture Radar (4 chapters), Space-time Adaptive Processing, moving target indication (MTI), bistatic radar, low probability of intercept (LPI) radar, weather radar, and ground-penetrating radar. Whether you're a radar novice or experienced professional, this is an essential refer

  8. Roughness parameters and surface deformation measured by coherence radar

    Science.gov (United States)

    Ettl, Peter; Schmidt, Berthold E.; Schenk, M.; Laszlo, Ildiko; Haeusler, Gerd

    1998-09-01

    The 'coherence radar' was introduced as a method to measure the topology of optically rough surfaces. The basic principle is white light interferometry in individual speckles. We will discuss the potentials and limitations of the coherence radar to measure the microtopology, the roughness parameters, and the out of plane deformation of smooth and rough object surfaces. We have to distinguish objects with optically smooth (polished) surfaces and with optically rough surfaces. Measurements at polished surfaces with simple shapes (flats, spheres) are the domain of classical interferometry. We demonstrate new methods to evaluate white light interferograms and compare them to the standard Fourier evaluation. We achieve standard deviations of the measured signals of a few nanometers. We further demonstrate that we can determine the roughness parameters of a surface by the coherence radar. We use principally two approaches: with very high aperture the surface topology is laterally resolved. From the data we determine the roughness parameters according to standardized evaluation procedures, and compare them with mechanically acquired data. The second approach is by low aperture observation (unresolved topology). Here the coherence radar supplies a statistical distance signal from which we can determine the standard deviation of the surface height variations. We will further discuss a new method to measure the deformation of optically rough surfaces, based on the coherence radar. Unless than with standard speckle interferometry, the new method displays absolute deformation. For small out-of-plane deformation (correlated speckle), the potential sensitivity is in the nanometer regime. Large deformations (uncorrelated speckle) can be measured with an uncertainty equal to the surface roughness.

  9. Broadview Radar Altimetry Toolbox

    Science.gov (United States)

    Mondéjar, Albert; Benveniste, Jérôme; Naeije, Marc; Escolà, Roger; Moyano, Gorka; Roca, Mònica; Terra-Homem, Miguel; Friaças, Ana; Martinho, Fernando; Schrama, Ernst; Ambrózio, Américo; Restano, Marco

    2016-07-01

    The universal altimetry toolbox, BRAT (Broadview Radar Altimetry Toolbox) which can read all previous and current altimetry missions' data, incorporates now the capability to read the upcoming Sentinel-3 L1 and L2 products. ESA endeavoured to develop and supply this capability to support the users of the future Sentinel-3 SAR Altimetry Mission. BRAT is a collection of tools and tutorial documents designed to facilitate the processing of radar altimetry data. This project started in 2005 from the joint efforts of ESA (European Space Agency) and CNES (Centre National d'Études Spatiales), and it is freely available at http://earth.esa.int/brat. The tools enable users to interact with the most common altimetry data formats. The BratGUI is the front-end for the powerful command line tools that are part of the BRAT suite. BRAT can also be used in conjunction with MATLAB/IDL (via reading routines) or in C/C++/Fortran via a programming API, allowing the user to obtain desired data, bypassing the data-formatting hassle. BRAT can be used simply to visualise data quickly, or to translate the data into other formats such as NetCDF, ASCII text files, KML (Google Earth) and raster images (JPEG, PNG, etc.). Several kinds of computations can be done within BRAT involving combinations of data fields that the user can save for posterior reuse or using the already embedded formulas that include the standard oceanographic altimetry formulas. The Radar Altimeter Tutorial, that contains a strong introduction to altimetry, shows its applications in different fields such as Oceanography, Cryosphere, Geodesy, Hydrology among others. Included are also "use cases", with step-by-step examples, on how to use the toolbox in the different contexts. The Sentinel-3 SAR Altimetry Toolbox shall benefit from the current BRAT version. While developing the toolbox we will revamp of the Graphical User Interface and provide, among other enhancements, support for reading the upcoming S3 datasets and

  10. Weather Radar Technology Development

    Science.gov (United States)

    1990-08-15

    Preparation). MISCELLANEOUS Donaldson Jr, R.J., 1987: "Significance of the 40th Anniversary Conference." Address at the Battan Memorial and 40th Anni - versary...Bergen and Albers (1987). They have achieved -37 -29 -25 -6 4 7 magnificent results for reducing general -35 -28 -19 -7 -3 4 ambiguity. 283 284 285 3.2... Albers , 1988: Two- and the National Severe Storms Laboratory S-band three-dimensional de-aliasing of Doppler radar in Norman, Oklahoma. For three

  11. Terahertz radar cross section measurements

    DEFF Research Database (Denmark)

    Iwaszczuk, Krzysztof; Heiselberg, Henning; Jepsen, Peter Uhd

    2010-01-01

    We perform angle- and frequency-resolved radar cross section (RCS) measurements on objects at terahertz frequencies. Our RCS measurements are performed on a scale model aircraft of size 5-10 cm in polar and azimuthal configurations, and correspond closely to RCS measurements with conventional radar...

  12. Performance indicators modern surveillance radar

    NARCIS (Netherlands)

    Nooij, P.N.C.; Theil, A.

    2014-01-01

    Blake chart computations are widely employed to rank detection coverage capabilities of competitive search radar systems. Developed for comparable 2D radar systems with a mechanically rotating reflector antenna, it was not necessary to regard update rate and plot quality in Blake's chart. To

  13. Measuring human behaviour with radar

    NARCIS (Netherlands)

    Dorp, Ph. van

    2001-01-01

    The paper presents human motion measurements with the experimental Frequency Modulated Continuous Wave(FMCW) radar at TNO-FEL. The aim of these measurements is to analyse the Doppler velocity spectrum of humans. These analysis give insight in measuring human behaviour with radar for security applica

  14. Imaging with Synthetic Aperture Radar

    CERN Document Server

    Massonnet, Didier

    2008-01-01

    Describing a field that has been transformed by the recent availability of data from a new generation of space and airborne systems, the authors offer a synthetic geometrical approach to the description of synthetic aperture radar, one that addresses physicists, radar specialists, as well as experts in image processing.  

  15. Performance indicators modern surveillance radar

    NARCIS (Netherlands)

    Nooij, P.N.C.; Theil, A.

    2014-01-01

    Blake chart computations are widely employed to rank detection coverage capabilities of competitive search radar systems. Developed for comparable 2D radar systems with a mechanically rotating reflector antenna, it was not necessary to regard update rate and plot quality in Blake's chart. To charact

  16. Synthetic Aperture Radar - Hardware Development

    Directory of Open Access Journals (Sweden)

    V. Rosner

    2009-06-01

    Full Text Available Experimental real and synthetic aperture radar are developed from the base-band digital unit to the analogue RF parts, based on solid state units, using pulse compression for radar imaging. Proper QPSK code is found for matched filter.

  17. Radar image registration and rectification

    Science.gov (United States)

    Naraghi, M.; Stromberg, W. D.

    1983-01-01

    Two techniques for radar image registration and rectification are presented. In the registration method, a general 2-D polynomial transform is defined to accomplish the geometric mapping from one image into the other. The degree and coefficients of the polynomial are obtained using an a priori found tiepoint data set. In the second part of the paper, a rectification procedure is developed that models the distortion present in the radar image in terms of the radar sensor's platform parameters and the topographic variations of the imaged scene. This model, the ephemeris data and the digital topographic data are then used in rectifying the radar image. The two techniques are then used in registering and rectifying two examples of radar imagery. Each method is discussed as to its benefits, shortcomings and registration accuracy.

  18. A radar image time series

    Science.gov (United States)

    Leberl, F.; Fuchs, H.; Ford, J. P.

    1981-01-01

    A set of ten side-looking radar images of a mining area in Arizona that were aquired over a period of 14 yr are studied to demonstrate the photogrammetric differential-rectification technique applied to radar images and to examine changes that occurred in the area over time. Five of the images are rectified by using ground control points and a digital height model taken from a map. Residual coordinate errors in ground control are reduced from several hundred meters in all cases to + or - 19 to 70 m. The contents of the radar images are compared with a Landsat image and with aerial photographs. Effects of radar system parameters on radar images are briefly reviewed.

  19. Design of a Radar Based Space Situational Awareness System

    Science.gov (United States)

    Liebschwager, T.; Neff, T.; Suess, I. H.; Foerstner, I. R.

    2013-09-01

    Existing SSA-Networks in most cases consist of sensors which originally were not designed for the purpose of detecting or tracking space debris and active satellites. Furthermore there are different kinds of sensors in use which makes it even more complicated to handle all generated data. Therefore it is reasonable to create a network consisting of homogenous sensors, which means sensors of the same type (like radar or optical) and with the same output format of the data. Technologies that are available for detection and tracking of objects (e.g. optical sensors or radar) will be discussed. Focal point will be on operational availability, reliability and obtainable accuracy. It will be shown that Phased Array Radars are the most reasonable technology to be used while creating a sensor network consisting of homogenous sensors. This paper entails to present a proposal for a network of Phased Array Radars configured for this purpose. The system is intended to detect and track objects that are at least as small as objects that can currently be found in the US SSN catalogue. Furthermore potential hazards in different orbits will be evaluated and discussed to optimize the system on these areas. The system is supposed to be able to create an own object catalogue. Therefore perseverative tracking and required capacity will also be considered. On the basis of these considerations the paper shows how to lay-up such a radar-system starting from scratch. Criteria for detection and tracking of objects will be determined. This part of the work contains aspects like choosing the frequency band or tracking-frequencies for different sizes of objects. In the next step the locations for the sensors will be chosen. Based on thoughts about infrastructure it is plausible to place the radar systems on existing observation sites. By analyzing simulations with different numbers of sensors and / or locations several feasible approaches for such a Space Situational Awareness Network will be

  20. 100 years of radar

    CERN Document Server

    Galati, Gaspare

    2016-01-01

    This book offers fascinating insights into the key technical and scientific developments in the history of radar, from the first patent, taken out by Hülsmeyer in 1904, through to the present day. Landmark events are highlighted and fascinating insights provided into the exceptional people who made possible the progress in the field, including the scientists and technologists who worked independently and under strict secrecy in various countries across the world in the 1930s and the big businessmen who played an important role after World War II. The book encourages multiple levels of reading. The author is a leading radar researcher who is ideally placed to offer a technical/scientific perspective as well as a historical one. He has taken care to structure and write the book in such a way as to appeal to both non-specialists and experts. The book is not sponsored by any company or body, either formally or informally, and is therefore entirely unbiased. The text is enriched by approximately three hundred ima...

  1. Development of a ground signal processor for digital synthetic array radar data

    Science.gov (United States)

    Griffin, C. R.; Estes, J. M.

    1981-01-01

    A modified APQ-102 sidelooking array radar (SLAR) in a B-57 aircraft test bed is used, with other optical and infrared sensors, in remote sensing of Earth surface features for various users at NASA Johnson Space Center. The video from the radar is normally recorded on photographic film and subsequently processed photographically into high resolution radar images. Using a high speed sampling (digitizing) system, the two receiver channels of cross-and co-polarized video are recorded on wideband magnetic tape along with radar and platform parameters. These data are subsequently reformatted and processed into digital synthetic aperture radar images with the image data available on magnetic tape for subsequent analysis by investigators. The system design and results obtained are described.

  2. A Recent Radar Observation of Asteroid 1566 Icarus

    Science.gov (United States)

    Mahapatra, P. R.; Ostro, S. J.; Benner, L. A. M.; Rosema, K. D.; Jurgens, R. F.; Winkler, R.; Rose, R.; Giorgini, J. D.; Yeomans, D. K.; Slade, M. A.

    1998-09-01

    We report Doppler-only radar observations of 1566 Icarus at Goldstone at a transmitter frequency of 8510 MHz (3.5 cm wavelength) during 1996 June 8-10, the first radar detection of the object since 1968. Optimally filtered and folded spectra achieve a maximum opposite-circular (OC) polarization signal-to-noise ratio of about 10 and help to constrain Icarus' physical properties. We obtain an OC radar cross section of 0.05 square kilometers (+/- 35%), which is about one-half that estimated by Goldstein (1969, Icarus 10, 430) and by Pettengill et al. (1969, Icarus 10, 432), and a circular polarization ratio of 0.5 +/- 0.2. We analyze the echo power spectrum with a model incorporating the echo bandwidth B and a spectral shape parameter n, yielding a coupled constraint between B and n. We adopt 25 Hz as the lower bound on B, which gives a lower bound on the maximum pole-on breadth of about 0.6 km, and upper bounds on the radar and optical albedos that are consistent with Icarus' QS-class taxonomy. The observed circular polarization ratio indicates a very rough near-surface at spatial scales near the radar wavelength.

  3. Radar signature acquisition using an indigenously designed noise radar system

    Science.gov (United States)

    Freundorfer, A. P.; Siddiqui, J. Y.; Antar, Y. M. M.; Thayaparan, T.

    2011-06-01

    A new design of a noise radar system is proposed with capabilities to measure and acquire the radar signature of various targets. The proposed system can cover a noise bandwidth of near DC to 30 GHz. The noise radar signature measurements were conducted for selective targets like spheres and carpenter squares with and without dielectric bodies for a noise band of 400MHz-3000MHz. The bandwidth of operation was limited by the multiplier and the antennae used. The measured results of the target signatures were verified with the simulation results.

  4. The use of radar for bathymetry assessment

    NARCIS (Netherlands)

    Aardoom, J.H.; Greidanus, H.S.F.

    1998-01-01

    The bottom topography in shallow seas can be observed by air- and spaceborne imaging radar. Bathymetric information derived from radar data is limited in accuracy, but radar has a good spatial coverage. The accuracy can be increased by assimilating the radar imagery into existing or insitu gathered

  5. Radar, Insect Population Ecology, and Pest Management

    Science.gov (United States)

    Vaughn, C. R. (Editor); Wolf, W. (Editor); Klassen, W. (Editor)

    1979-01-01

    Discussions included: (1) the potential role of radar in insect ecology studies and pest management; (2) the potential role of radar in correlating atmospheric phenomena with insect movement; (3) the present and future radar systems; (4) program objectives required to adapt radar to insect ecology studies and pest management; and (5) the specific action items to achieve the objectives.

  6. The use of radar for bathymetry assessment

    NARCIS (Netherlands)

    Aardoom, J.H.; Greidanus, H.S.F.

    1998-01-01

    The bottom topography in shallow seas can be observed by air- and spaceborne imaging radar. Bathymetric information derived from radar data is limited in accuracy, but radar has a good spatial coverage. The accuracy can be increased by assimilating the radar imagery into existing or insitu gathered

  7. Radar signal analysis and processing using Matlab

    CERN Document Server

    Mahafza, Bassem R

    2008-01-01

    Offering radar-related software for the analysis and design of radar waveform and signal processing, this book provides comprehensive coverage of radar signals and signal processing techniques and algorithms. It contains numerous graphical plots, common radar-related functions, table format outputs, and end-of-chapter problems. The complete set of MATLAB[registered] functions and routines are available for download online.

  8. Monostatic radar cross section of flying wing delta planforms

    Directory of Open Access Journals (Sweden)

    Sevoor Meenakshisundaram Vaitheeswaran

    2017-04-01

    Full Text Available The design of the flying wing and its variants shapes continues to have a profound influence in the design of the current and future use of military aircraft. There is very little in the open literature available to the understanding and by way of comparison of the radar cross section of the different wing planforms, for obvious reasons of security and sensitivity. This paper aims to provide an insight about the radar cross section of the various flying wing planforms that would aid the need and amount of radar cross section suppression to escape detection from surveillance radars. Towards this, the shooting and bouncing ray method is used for analysis. In this, the geometric optics theory is first used for launching and tracing the electromagnetic rays to calculate the electromagnetic field values as the waves bounce around the target. The physical optics theory is next used to calculate the final scattered electric field using the far field integration along the observation direction. For the purpose of comparison, all the planform shapes are assumed to be having the same area, and only the aspect ratio and taper ratio are varied to feature representative airplanes.

  9. Fast, High-Resolution Terahertz Radar Imaging at 25 Meters

    Science.gov (United States)

    Cooper, Ken B.; Dengler, Robert J.; Llombart, Nuria; Talukder, Ashit; Panangadan, Anand V.; Peay, Chris S.; Siegel, Peter H.

    2010-01-01

    We report improvements in the scanning speed and standoff range of an ultra-wide bandwidth terahertz (THz) imaging radar for person-borne concealed object detection. Fast beam scanning of the single-transceiver radar is accomplished by rapidly deflecting a flat, light-weight subreflector in a confocal Gregorian optical geometry. With RF back-end improvements also implemented, the radar imaging rate has increased by a factor of about 30 compared to that achieved previously in a 4 m standoff prototype instrument. In addition, a new 100 cm diameter ellipsoidal aluminum reflector yields beam spot diameters of approximately 1 cm over a 50x50 cm field of view at a range of 25 m, although some aberrations are observed that probably arise from misaligned optics. Through-clothes images of a concealed threat at 25 m range, acquired in 5 seconds, are presented, and the impact of reduced signal-to-noise from an even faster frame rate is analyzed. These results inform the system requirements for eventually achieving sub-second or video-rate THz radar imaging.

  10. Fast high-resolution terahertz radar imaging at 25 meters

    Science.gov (United States)

    Cooper, Ken B.; Dengler, Robert J.; Llombart, Nuria; Talukder, Ashit; Panangadan, Anand V.; Peay, Chris S.; Mehdi, Imran; Siegel, Peter H.

    2010-04-01

    We report improvements in the scanning speed and standoff range of an ultra-wide bandwidth terahertz (THz) imaging radar for person-borne concealed object detection. Fast beam scanning of the single-transceiver radar is accomplished by rapidly deflecting a flat, light-weight subreflector in a confocal Gregorian optical geometry. With RF back-end improvements also implemented, the radar imaging rate has increased by a factor of about 30 compared to that achieved previously in a 4 m standoff prototype instrument. In addition, a new 100 cm diameter ellipsoidal aluminum reflector yields beam spot diameters of approximately 1 cm over a 50×50 cm field of view at a range of 25 m, although some aberrations are observed that probably arise from misaligned optics. Through-clothes images of concealed pipes at 25 m range, acquired in 5 seconds, are presented, and the impact of reduced signal-to-noise from an even faster frame rate is analyzed. These results inform the requirements for eventually achieving sub-second or video-rate THz radar imaging.

  11. Large phased-array radars

    Science.gov (United States)

    Brookner, Eli, Dr.

    1988-12-01

    Large phased-array radars can play a very important part in arms control. They can be used to determine the number of RVs being deployed, the type of targeting of the RVs (the same or different targets), the shape of the deployed objects, and possibly the weight and yields of the deployed RVs. They can provide this information at night as well as during the day and during rain and cloud covered conditions. The radar can be on the ground, on a ship, in an airplane, or space-borne. Airborne and space-borne radars can provide high resolution map images of the ground for reconnaissance, of anti-ballistic missile (ABM) ground radar installations, missile launch sites, and tactical targets such as trucks and tanks. The large ground based radars can have microwave carrier frequencies or be at HF (high frequency). For a ground-based HF radar the signal is reflected off the ionosphere so as to provide over-the-horizon (OTH) viewing of targets. OTH radars can potentially be used to monitor stealth targets and missile traffic.

  12. Air and spaceborne radar systems an introduction

    CERN Document Server

    Lacomme, Philippe; Hardange, Jean-Philippe; Normant, Eric

    2001-01-01

    A practical tool on radar systems that will be of major help to technicians, student engineers and engineers working in industry and in radar research and development. The many users of radar as well as systems engineers and designers will also find it highly useful. Also of interest to pilots and flight engineers and military command personnel and military contractors. """"This introduction to the field of radar is intended for actual users of radar. It focuses on the history, main principles, functions, modes, properties and specific nature of modern airborne radar. The book examines radar's

  13. Signal processing in noise waveform radar

    CERN Document Server

    Kulpa, Krzysztof

    2013-01-01

    This book is devoted to the emerging technology of noise waveform radar and its signal processing aspects. It is a new kind of radar, which use noise-like waveform to illuminate the target. The book includes an introduction to basic radar theory, starting from classical pulse radar, signal compression, and wave radar. The book then discusses the properties, difficulties and potential of noise radar systems, primarily for low-power and short-range civil applications. The contribution of modern signal processing techniques to making noise radar practical are emphasized, and application examples

  14. Under the Radar

    CERN Document Server

    Goss, WM

    2010-01-01

    This is the biography of Ruby Payne-Scott (1912 to 1981). As the first female radio astronomer (and one of the first people in the world to consider radio astronomy), she made classic contributions to solar radio physics. She also played a major role in the design of the Australian government's Council for Scientific and Industrial Research radars, which were in turn of vital importance in the Southwest Pacific Theatre in World War II and were used by Australian, US and New Zealand personnel. From a sociological perspective, her career also offers many examples of the perils of being a female academic in the first half of the 20th century. Written in an engaging style and complemented by many historical photographs this book gives a fascinating insight into the beginning of radio astronomy and the role of a pioneering woman in astronomy.

  15. 77 HHz radar for automobile

    Directory of Open Access Journals (Sweden)

    O. M. Lyashuk

    2012-02-01

    Full Text Available Modern requirements to safety and comfort of drivers and passengers of a car cause continuous development of corresponding technical facilities. Technologies that provide implementation of these requirements are on the first place for the developers of cars. One of the most important requirement is an analysis of road situation, where various sensors are used. One of them is radar. Principle of action, basic parameters and application of radar RS-200 is considered in this article. Radar is used in modern cars of brand Mersedes Benz and works on frequency 77 HHz. It uses the LFM (linear frequency modulation with the programmatic setting of resolution for distance.

  16. Introduction to radar target recognition

    CERN Document Server

    Tait, P

    2006-01-01

    This new text provides an overview of the radar target recognition process and covers the key techniques being developed for operational systems. It is based on the fundamental scientific principles of high resolution radar, and explains how the techniques can be used in real systems, taking into account the characteristics of practical radar system designs and component limitations. It also addresses operational aspects, such as how high resolution modes would fit in with other functions such as detection and tracking. Mathematics is kept to a minimum and the complex techniques and issues are

  17. Space noise synthetic aperture radar

    Science.gov (United States)

    Kulpa, Krzysztof S.

    2006-03-01

    The paper presents limitations of space borne synthetic aperture radars, caused by range and Doppler velocity ambiguities, and the concept of usage of the noise radar technology for creation of high-resolution space SAR images. The noise SAR is free from limitation caused by the periodicity of pulse waveform ambiguity function, and therefore this technology can be used in the future space missions. The basic concept of noise SAR image formation is also presented. The image formation algorithm has been verified using the simulated data produced by Raw Radar Data Simulator.

  18. The lidar dark band: An oddity of the radar bright band analogy

    Energy Technology Data Exchange (ETDEWEB)

    Sassen, K. [Univ. of Utah, Salt Lake City, UT (United States)

    1996-04-01

    Although much has sbeen learned from independent radar and lidar studies of atmospheric precipitations, occasionally supported by aircraft profiling, what has been lacking is combined optical, microwave, and insitu observations of the melting layer. Fortunately, the rainshowers on April 21, 1994, during the Remote Cloud Sensing intensive obervations Period (RCSIOP) at the Southern Great Plains Cloud and radiation Testbed (CART) site provided an opportunity for coordinated dual-wavelength University of Utah Polarization Diversity Lidar, University of Massachusetts Cloud Profiling Radar System Doppler Radar, and the University of North Dakota Citation aircraft measurements.

  19. Coordinated Radar Resource Management for Networked Phased Array Radars

    Science.gov (United States)

    2014-12-01

    computed, and the detection of a target is determined based on a Monte Carlo test. For each successful target confirmation, a measurement report is...detection based on Monte Carlo test • add appropriate random perturbations to detec- tion measurements Radar Targets Environment Input Parameters... Fuente and J.R. Casar-Corredera. Optimal radar pulse scheduling using a neural network. In IEEE Int. Conf. Neural Networks, volume 7, pages 4558–4591

  20. System Realization of Broad Band Digital Beam Forming for Digital Array Radar

    Directory of Open Access Journals (Sweden)

    Wang Feng

    2013-09-01

    Full Text Available Broad band Digital Beam Forming (DBF is the key technique for the realization of Digital Array Radar (DAR. We propose the method of combination realization of the channel equalization and DBF time delay filter function by using adaptive Sample Matrix Inversion algorithm. The broad band DBF function is realized on a new DBF module based on parallel fiber optic engines and Field Program Gate Array (FPGA. Good performance is achieved when it is used to some radar products.

  1. 3D Visualization of Radar Backscattering Diagrams Based on OpenGL

    Directory of Open Access Journals (Sweden)

    Yulia V. Zhulina

    2004-03-01

    Full Text Available A digital method of calculating the radar backscattering diagrams is presented. The method uses a digital model of an arbitrary scattering object in the 3D graphics package “OpenGL” and calculates the backscattered signal in the physical optics approximation. The backscattering diagram is constructed by means of rotating the object model around the radar-target line.

  2. Compressive Sensing for MIMO Radar

    CERN Document Server

    Yu, Yao; Poor, H Vincent

    2009-01-01

    Multiple-input multiple-output (MIMO) radar systems have been shown to achieve superior resolution as compared to traditional radar systems with the same number of transmit and receive antennas. This paper considers a distributed MIMO radar scenario, in which each transmit element is a node in a wireless network, and investigates the use of compressive sampling for direction-of-arrival (DOA) estimation. According to the theory of compressive sampling, a signal that is sparse in some domain can be recovered based on far fewer samples than required by the Nyquist sampling theorem. The DOA of targets form a sparse vector in the angle space, and therefore, compressive sampling can be applied for DOA estimation. The proposed approach achieves the superior resolution of MIMO radar with far fewer samples than other approaches. This is particularly useful in a distributed scenario, in which the results at each receive node need to be transmitted to a fusion center for further processing.

  3. Air Defense Radar Operations Facility

    Data.gov (United States)

    Federal Laboratory Consortium — Facility consists of laboratories, experimental test equipment including state-of-theart test bed radar, and test ranges. The facilities are used to design, develop,...

  4. Air Defense Radar Operations Facility

    Data.gov (United States)

    Federal Laboratory Consortium — Facility consists of laboratories, experimental test equipment including state-of-theart test bed radar, and test ranges. The facilities are used to design, develop,...

  5. SMAP RADAR Calibration and Validation

    Science.gov (United States)

    West, R. D.; Jaruwatanadilok, S.; Chaubel, M. J.; Spencer, M.; Chan, S. F.; Chen, C. W.; Fore, A.

    2015-12-01

    The Soil Moisture Active Passive (SMAP) mission launched on Jan 31, 2015. The mission employs L-band radar and radiometer measurements to estimate soil moisture with 4% volumetric accuracy at a resolution of 10 km, and freeze-thaw state at a resolution of 1-3 km. Immediately following launch, there was a three month instrument checkout period, followed by six months of level 1 (L1) calibration and validation. In this presentation, we will discuss the calibration and validation activities and results for the L1 radar data. Early SMAP radar data were used to check commanded timing parameters, and to work out issues in the low- and high-resolution radar processors. From April 3-13 the radar collected receive only mode data to conduct a survey of RFI sources. Analysis of the RFI environment led to a preferred operating frequency. The RFI survey data were also used to validate noise subtraction and scaling operations in the radar processors. Normal radar operations resumed on April 13. All radar data were examined closely for image quality and calibration issues which led to improvements in the radar data products for the beta release at the end of July. Radar data were used to determine and correct for small biases in the reported spacecraft attitude. Geo-location was validated against coastline positions and the known positions of corner reflectors. Residual errors at the time of the beta release are about 350 m. Intra-swath biases in the high-resolution backscatter images are reduced to less than 0.3 dB for all polarizations. Radiometric cross-calibration with Aquarius was performed using areas of the Amazon rain forest. Cross-calibration was also examined using ocean data from the low-resolution processor and comparing with the Aquarius wind model function. Using all a-priori calibration constants provided good results with co-polarized measurements matching to better than 1 dB, and cross-polarized measurements matching to about 1 dB in the beta release. During the

  6. Haystack Ultrawideband Satellite Imaging Radar

    Science.gov (United States)

    2014-09-01

    enable long-range imaging. In 2013, a major upgrade to the facility was completed, adding a millimeter - wave W-band radar capability to Haystack’s X...diameter antenna was completely rebuilt to provide a 100 μm root-mean-square (rms) surface accuracy to support operation at the 3 mm wave - length (W...electromagnetic wave propagation through the troposphere. − The signal processing system lev- eraged Lincoln Laboratory‘s Radar Open Systems

  7. Alternatives for Military Space Radar

    Science.gov (United States)

    2007-01-01

    Because the characteristics and performance of Discov- erer II’s radar are well documented, CBO based the design of its notional Space Radar on that of...2005, report to accompany H.R. 4613, Report 108-553 (June 18, 2004). 13. Air Force Space and Missile Systems Center, “Fact Sheet: Discov- erer II...360-degree coverage in GMTI mode. See Federation of American Scientists, Space Policy Project, “Discov- erer II STARLITE” (January 24, 2000

  8. Coded continuous wave meteor radar

    Science.gov (United States)

    Chau, J. L.; Vierinen, J.; Pfeffer, N.; Clahsen, M.; Stober, G.

    2016-12-01

    The concept of a coded continuous wave specular meteor radar (SMR) is described. The radar uses a continuously transmitted pseudorandom phase-modulated waveform, which has several advantages compared to conventional pulsed SMRs. The coding avoids range and Doppler aliasing, which are in some cases problematic with pulsed radars. Continuous transmissions maximize pulse compression gain, allowing operation at lower peak power than a pulsed system. With continuous coding, the temporal and spectral resolution are not dependent on the transmit waveform and they can be fairly flexibly changed after performing a measurement. The low signal-to-noise ratio before pulse compression, combined with independent pseudorandom transmit waveforms, allows multiple geographically separated transmitters to be used in the same frequency band simultaneously without significantly interfering with each other. Because the same frequency band can be used by multiple transmitters, the same interferometric receiver antennas can be used to receive multiple transmitters at the same time. The principles of the signal processing are discussed, in addition to discussion of several practical ways to increase computation speed, and how to optimally detect meteor echoes. Measurements from a campaign performed with a coded continuous wave SMR are shown and compared with two standard pulsed SMR measurements. The type of meteor radar described in this paper would be suited for use in a large-scale multi-static network of meteor radar transmitters and receivers. Such a system would be useful for increasing the number of meteor detections to obtain improved meteor radar data products, such as wind fields. This type of a radar would also be useful for over-the-horizon radar, ionosondes, and observations of field-aligned-irregularities.

  9. Radar Imaging and Target Identification

    Science.gov (United States)

    2009-02-09

    Methods in Wave Propagation, Vaxjo, Swe- den. • February 19, 2008, "Radar Imaging", math colloquium, Brigham- Young University. • January 31, 2008...manuscript, namely "Radar detection using sparsely distributed 19 apertures in urban environments", Ling Wang, II- Young Son, Trond Varslot, C. Evren...Coinmun. COM- 20, pp. 774-780, 1972. [24] M. Tomlinson, "New automatic equalizer employing modulo arithmetic," Electron. Lett. 7, pp. 138-139, 1971

  10. Model-Based Radar Power Calculations for Ultra-Wideband (UWB) Synthetic Aperture Radar (SAR)

    Science.gov (United States)

    2013-06-01

    performance in complex scenarios. Among these scenarios are ground penetrating radar and forward-looking radar for landmine and improvised explosive...Model-Based Radar Power Calculations for Ultra-Wideband (UWB) Synthetic Aperture Radar (SAR) by Traian Dogaru ARL-TN-0548 June 2013...2013 Model-Based Radar Power Calculations for Ultra-Wideband (UWB) Synthetic Aperture Radar (SAR) Traian Dogaru Sensors and Electron

  11. Coded continuous wave meteor radar

    Science.gov (United States)

    Vierinen, Juha; Chau, Jorge L.; Pfeffer, Nico; Clahsen, Matthias; Stober, Gunter

    2016-03-01

    The concept of a coded continuous wave specular meteor radar (SMR) is described. The radar uses a continuously transmitted pseudorandom phase-modulated waveform, which has several advantages compared to conventional pulsed SMRs. The coding avoids range and Doppler aliasing, which are in some cases problematic with pulsed radars. Continuous transmissions maximize pulse compression gain, allowing operation at lower peak power than a pulsed system. With continuous coding, the temporal and spectral resolution are not dependent on the transmit waveform and they can be fairly flexibly changed after performing a measurement. The low signal-to-noise ratio before pulse compression, combined with independent pseudorandom transmit waveforms, allows multiple geographically separated transmitters to be used in the same frequency band simultaneously without significantly interfering with each other. Because the same frequency band can be used by multiple transmitters, the same interferometric receiver antennas can be used to receive multiple transmitters at the same time. The principles of the signal processing are discussed, in addition to discussion of several practical ways to increase computation speed, and how to optimally detect meteor echoes. Measurements from a campaign performed with a coded continuous wave SMR are shown and compared with two standard pulsed SMR measurements. The type of meteor radar described in this paper would be suited for use in a large-scale multi-static network of meteor radar transmitters and receivers. Such a system would be useful for increasing the number of meteor detections to obtain improved meteor radar data products.

  12. Dunes on Titan observed by Cassini Radar

    Science.gov (United States)

    Radebaugh, J.; Lorenz, R.D.; Lunine, J.I.; Wall, S.D.; Boubin, G.; Reffet, E.; Kirk, R.L.; Lopes, R.M.; Stofan, E.R.; Soderblom, L.; Allison, M.; Janssen, M.; Paillou, P.; Callahan, P.; Spencer, C.; ,

    2008-01-01

    Thousands of longitudinal dunes have recently been discovered by the Titan Radar Mapper on the surface of Titan. These are found mainly within ??30?? of the equator in optically-, near-infrared-, and radar-dark regions, indicating a strong proportion of organics, and cover well over 5% of Titan's surface. Their longitudinal duneform, interactions with topography, and correlation with other aeolian forms indicate a single, dominant wind direction aligned with the dune axis plus lesser, off-axis or seasonally alternating winds. Global compilations of dune orientations reveal the mean wind direction is dominantly eastwards, with regional and local variations where winds are diverted around topographically high features, such as mountain blocks or broad landforms. Global winds may carry sediments from high latitude regions to equatorial regions, where relatively drier conditions prevail, and the particles are reworked into dunes, perhaps on timescales of thousands to tens of thousands of years. On Titan, adequate sediment supply, sufficient wind, and the absence of sediment carriage and trapping by fluids are the dominant factors in the presence of dunes. ?? 2007 Elsevier Inc. All rights reserved.

  13. Multi-mission, autonomous, synthetic aperture radar

    Science.gov (United States)

    Walls, Thomas J.; Wilson, Michael L.; Madsen, David; Jensen, Mark; Sullivan, Stephanie; Addario, Michael; Hally, Iain

    2014-05-01

    Unmanned aerial systems (UASs) have become a critical asset in current battlespaces and continue to play an increasing role for intelligence, surveillance and reconnaissance (ISR) missions. With the development of medium-to-low altitude, rapidly deployable aircraft platforms, the ISR community has seen an increasing push to develop ISR sensors and systems with real-time mission support capabilities. This paper describes recent flight demonstrations and test results of the RASAR (Real-time, Autonomous, Synthetic Aperture Radar) sensor system. RASAR is a modular, multi-band (L and X) synthetic aperture radar (SAR) imaging sensor designed for self-contained, autonomous, real-time operation with mission flexibility to support a wide range of ISR needs within the size, weight and power constraints of Group III UASs. The sensor command and control and real-time image formation processing are designed to allow integration of RASAR into a larger, multi-intelligence system of systems. The multi-intelligence architecture and a demonstration of real-time autonomous cross-cueing of a separate optical sensor will be presented.

  14. Radar Monitoring of Wetlands for Malaria Control

    Science.gov (United States)

    Pope, Kevin O.

    1997-01-01

    Malaria is perhaps the most serious human disease problem. It inflicts millions worldwide and is on the rise in many countries where it was once under control. This rise is in part due to the high costs, both economic and environmental, of current control programs. The search for more cost-effective means to combat malaria has focussed attention on new technologies, one of which is remote sensing. Remote sensing has become an important tool in the effort to control a variety of diseases worldwide and malaria is perhaps one of the most promising. This study is part of the malaria control effort in the Central American country of Belize, which has experienced a resurgence of malaria in the last two decades. The proposed project is a feasibility study of the use of Radarsat (and other similar radar systems) to monitor seasonal changes in the breeding sites of the anopheline mosquito, which is responsible for malaria transmission. We propose that spatial and temporal changes in anopheline mosquito production can be predicted by sensing where and when their breeding sites are flooded. Timely knowledge of anopheline mosquito production is a key factor in control efforts. Such knowledge can be used by local control agencies to direct their limited resources to selected areas and time periods when the human population is at greatest risk. Radar is a key sensor in this application because frequent cloud cover during the peak periods of malaria transmission precludes the use of optical sensors.

  15. Radar observations and shape model of asteroid 16 Psyche

    Science.gov (United States)

    Shepard, Michael K.; Richardson, James; Taylor, Patrick A.; Rodriguez-Ford, Linda A.; Conrad, Al; de Pater, Imke; Adamkovics, Mate; de Kleer, Katherine; Males, Jared R.; Morzinski, Katie M.; Close, Laird M.; Kaasalainen, Mikko; Viikinkoski, Matti; Timerson, Bradley; Reddy, Vishnu; Magri, Christopher; Nolan, Michael C.; Howell, Ellen S.; Benner, Lance A. M.; Giorgini, Jon D.; Warner, Brian D.; Harris, Alan W.

    2017-01-01

    Using the S-band radar at Arecibo Observatory, we observed 16 Psyche, the largest M-class asteroid in the main belt. We obtained 18 radar imaging and 6 continuous wave runs in November and December 2015, and combined these with 16 continuous wave runs from 2005 and 6 recent adaptive-optics (AO) images (Drummond et al., 2016) to generate a three-dimensional shape model of Psyche. Our model is consistent with a previously published AO image (Hanus et al., 2013) and three multi-chord occultations. Our shape model has dimensions 279 × 232 × 189 km (± 10%), Deff = 226 ± 23 km, and is 6% larger than, but within the uncertainties of, the most recently published size and shape model generated from the inversion of lightcurves (Hanus et al., 2013). Psyche is roughly ellipsoidal but displays a mass-deficit over a region spanning 90° of longitude. There is also evidence for two ∼50-70 km wide depressions near its south pole. Our size and published masses lead to an overall bulk density estimate of 4500 ± 1400 kgm-3. Psyche's mean radar albedo of 0.37 ± 0.09 is consistent with a near-surface regolith composed largely of iron-nickel and ∼40% porosity. Its radar reflectivity varies by a factor of 1.6 as the asteroid rotates, suggesting global variations in metal abundance or bulk density in the near surface. The variations in radar albedo appear to correlate with large and small-scale shape features. Our size and Psyche's published absolute magnitude lead to an optical albedo of pv = 0.15 ± 0.03, and there is evidence for albedo variegations that correlate with shape features.

  16. Asteroid 16 Psyche: Radar Observations and Shape Model

    Science.gov (United States)

    Shepard, Michael K.; Richardson, James E.; Taylor, Patrick A.; Rodriguez-Ford, Linda A.; Conrad, Al; de Pater, Imke; Adamkovics, Mate; de Kleer, Katherine R.; Males, Jared; Morzinski, Kathleen M.; Miller Close, Laird; Kaasalainen, Mikko; Viikinkoski, Matti; Timerson, Bradley; Reddy, Vishnu; Magri, Christopher; Nolan, Michael C.; Howell, Ellen S.; Warner, Brian D.; Harris, Alan W.

    2016-10-01

    We observed 16 Psyche, the largest M-class asteroid in the main belt, using the S-band radar at Arecibo Observatory. We obtained 18 radar imaging and 6 continuous wave runs in November and December 2015, and combined these with 16 continuous wave runs from 2005 and 6 recent adaptive-optics (AO) images to generate a three-dimensional shape model of Psyche. Our model is consistent with a previously published AO image [Hanus et al. Icarus 226, 1045-1057, 2013] and three multi-chord occultations. Our shape model has dimensions 279 x 232 x 189 km (±10%), Deff = 226 ± 23 km, and is 6% larger than, but within the uncertainties of, the most recently published size and shape model generated from the inversion of lightcurves [Hanus et al., 2013]. Psyche is roughly ellipsoidal but displays a mass-deficit over a region spanning 90° of longitude. There is also evidence for two ~50-70 km wide depressions near its south pole. Our size and published masses lead to an overall bulk density estimate of 4500 ± 1400 kg m-3. Psyche's mean radar albedo of 0.37 ± 0.09 is consistent with a near-surface regolith composed largely of iron-nickel and ~40% porosity. Its radar reflectivity varies by a factor of 1.6 as the asteroid rotates, suggesting global variations in metal abundance or bulk density in the near surface. The variations in radar albedo appear to correlate with large and small-scale shape features. Our size and Psyche's published absolute magnitude lead to an optical albedo of pv = 0.15 ± 0.03, and there is evidence for albedo variegations that correlate with shape features.

  17. On the collocation between dayside auroral activity and coherent HF radar backscatter

    Directory of Open Access Journals (Sweden)

    J. Moen

    Full Text Available The 2D morphology of coherent HF radar and optical cusp aurora has been studied for conditions of predominantly southward IMF conditions, which favours low-latitude boundary layer reconnection. Despite the variability in shape of radar cusp Doppler spectra, the spectral width criterion of > 220 m s–1 proves to be a robust cusp discriminator. For extended periods of well-developed radar backscatter echoes, the equatorward boundary of the > 220 m s–1 spectral width enhancement lines up remarkably well with the equatorward boundary of the optical cusp aurora. The spectral width boundary is however poorly determined during development and fading of radar cusp backscatter. Closer inspection of radar Doppler profile characteristics suggests that a combination of spectral width and shape may advance boundary layer identification by HF radar. For the two December days studied the onset of radar cusp backscatter occurred within pre-existing 630.0 nm cusp auroral activity and appear to be initiated by sunrise, i.e. favourable radio wave propagation conditions had to develop. Better methods are put forward for analysing optical data, and for physical interpretation of HF radar data, and for combining these data, as applied to detection, tracking, and better understanding of dayside aurora. The broader motivation of this work is to develop wider use by the scientific community, of results of these techniques, to accelerate understanding of dynamic high-latitude boundary-processes. The contributions in this work are: (1 improved techniques of analysis of observational data, yielding meaningfully enhanced accuracy for deduced cusp locations; (2 a correspondingly more pronounced validation of correlation of boundary locations derived from the observational data set; and (3 a firmer physical rationale as to why the good correlation observed should theoretically be expected.

    Key words: Ionosphere (ionospheric

  18. HPRF pulse Doppler stepped frequency radar

    Institute of Scientific and Technical Information of China (English)

    LONG Teng; REN LiXiang

    2009-01-01

    Stepped frequency radar Is a well known scheme to generate high range resolution profile (HRRP) of targets. Through appropriate radar parameter design, the radar enables both unambiguous velocity measurement and high resolution ranging within a single dwell in a high pulse repetition frequency (HPRF) mode. This paper analyzes in detail the design principle of the HPRF stepped frequency radar system, the solution to its ambiguity issue, as well as its signal processing method. Both theoretical analysis and simulation results demonstrate that the proposed radar scheme can work independently to solve the problem of motion compensation, and is therefore highly applicable to many new types of radar.

  19. Adaptive filters applied on radar signals

    OpenAIRE

    2013-01-01

    This master thesis has been performed at SAAB AB in Järfälla, Sweden.A radar warning receiver must alert the user when someone highlights it with radarsignals. Radar signals used today varies and has a wide frequency band. In order todetect all possible radar signals the radar warning receiver must have a widebandwidth. This results in that the noise power will be high in the radar warningreceiver and weak radar signals will be hard to detect or even undetected.The aim of the thesis work was ...

  20. Image quality improvement for underground radar by block migration method

    Science.gov (United States)

    Ho, Gwangsu; Kawanaka, Akira; Takagi, Mikio

    1993-11-01

    Techniques have been developed which have been imaging optically opaque regions using an electromagnetic wave radar in order to estimate the location of the objects in those regions. One important application of these techniques is the detection of buried pipes and cables. In the case of underground radar, its image quality often becomes low because the nature of the soil is not uniform and an electromagnetic wave is attenuated in soil. Hence, the method which improves the quality of the radar images is required. In this paper, we point out that the quality of underground images can be improved significantly by means of the block migration method. In this method LOT (Lapped Orthogonal Transform) was applied. LOT is a new block transform method in which basis functions overlap in adjacent blocks, and it has a fast computation algorithm. In addition to above, we propose a method of estimating dielectric constant in soil using the processed images. The result of applying the block migration method to the underground radar images are presented. It points out the good capability for the image quality improvement and the application of LOT can improve the influence by blocking and the processing time. Also the dielectric constant in each block can be estimated accurately.

  1. Synthetic aperture radar and interferometry development at Sandia National Laboratories

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-04-01

    Environmental monitoring, earth-resource mapping, and military systems require broad-area imaging at high resolutions. Many times the imagery must be acquired in inclement weather or during night as well as day. Synthetic aperture radar (SAR) provides such a capability. SAR systems take advantage of the long-range propagation characteristics of radar signals and the complex information processing capability of modern digital electronics to provide high resolution imagery. SAR complements photographic and other optical imaging capabilities because of the minimum constrains on time-of-day and atmospheric conditions and because of the unique responses of terrain and cultural targets to radar frequencies. Interferometry is a method for generating a three-dimensional image of terrain. The height projection is obtained by acquiring two SAR images from two slightly differing locations. It is different from the common method of stereoscopic imaging for topography. The latter relies on differing geometric projections for triangulation to define the surface geometry whereas interferometry relies on differences in radar propagation times between the two SAR locations. This paper presents the capabilities of SAR, explains how SAR works, describes a few SAR applications, provides an overview of SAR development at Sandia, and briefly describes the motion compensation subsystem.

  2. Coded continuous wave meteor radar

    Directory of Open Access Journals (Sweden)

    J. Vierinen

    2015-07-01

    Full Text Available The concept of coded continuous wave meteor radar is introduced. The radar uses a continuously transmitted pseudo-random waveform, which has several advantages: coding avoids range aliased echoes, which are often seen with commonly used pulsed specular meteor radars (SMRs; continuous transmissions maximize pulse compression gain, allowing operation with significantly lower peak transmit power; the temporal resolution can be changed after performing a measurement, as it does not depend on pulse spacing; and the low signal to noise ratio allows multiple geographically separated transmitters to be used in the same frequency band without significantly interfering with each other. The latter allows the same receiver antennas to be used to receive multiple transmitters. The principles of the signal processing are discussed, in addition to discussion of several practical ways to increase computation speed, and how to optimally detect meteor echoes. Measurements from a campaign performed with a coded continuous wave SMR are shown and compared with two standard pulsed SMR measurements. The type of meteor radar described in this paper would be suited for use in a large scale multi-static network of meteor radar transmitters and receivers. This would, for example, provide higher spatio-temporal resolution for mesospheric wind field measurements.

  3. Coded continuous wave meteor radar

    Science.gov (United States)

    Vierinen, J.; Chau, J. L.; Pfeffer, N.; Clahsen, M.; Stober, G.

    2015-07-01

    The concept of coded continuous wave meteor radar is introduced. The radar uses a continuously transmitted pseudo-random waveform, which has several advantages: coding avoids range aliased echoes, which are often seen with commonly used pulsed specular meteor radars (SMRs); continuous transmissions maximize pulse compression gain, allowing operation with significantly lower peak transmit power; the temporal resolution can be changed after performing a measurement, as it does not depend on pulse spacing; and the low signal to noise ratio allows multiple geographically separated transmitters to be used in the same frequency band without significantly interfering with each other. The latter allows the same receiver antennas to be used to receive multiple transmitters. The principles of the signal processing are discussed, in addition to discussion of several practical ways to increase computation speed, and how to optimally detect meteor echoes. Measurements from a campaign performed with a coded continuous wave SMR are shown and compared with two standard pulsed SMR measurements. The type of meteor radar described in this paper would be suited for use in a large scale multi-static network of meteor radar transmitters and receivers. This would, for example, provide higher spatio-temporal resolution for mesospheric wind field measurements.

  4. Improving Weather Radar Precipitation Estimates by Combining two Types of Radars

    DEFF Research Database (Denmark)

    Nielsen, Jesper Ellerbæk; Thorndahl, Søren Liedtke; Rasmussen, Michael R.

    2014-01-01

    the two radar types achieves a radar product with both long range and high temporal resolution. It is validated that the blended radar product performs better than the individual radars based on ground observations from laser disdrometers. However, the data combination is challenged by lower performance...

  5. MST radar data-base management

    Science.gov (United States)

    Wickwar, V. B.

    1983-01-01

    Data management for Mesospheric-Stratospheric-Tropospheric, (MST) radars is addressed. An incoherent-scatter radar data base is discussed in terms of purpose, centralization, scope, and nature of the data base management system.

  6. NOAA NEXt-Generation RADar (NEXRAD) Products

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This dataset consists of Level III weather radar products collected from Next-Generation Radar (NEXRAD) stations located in the contiguous United States, Alaska,...

  7. Design of multi-frequency CW radars

    CERN Document Server

    Jankiraman, Mohinder

    2007-01-01

    This book deals with the basic theory for design and analysis of Low Probability of Intercept (LPI) radar systems. The design of one such multi-frequency high resolution LPI radar, PANDORA, is covered.

  8. SMAP RADAR Processing and Calibration

    Science.gov (United States)

    West, R. D.; Jaruwatanadilok, S.; Kwoun, O.; Chaubell, M. J.

    2013-12-01

    The Soil Moisture Active Passive (SMAP) mission uses L-band radar and radiometer measurements to estimate soil moisture with 4% volumetric accuracy at a resolution of 10 km, and freeze-thaw state at a resolution of 1-3 km. Model sensitivities translate the soil moisture accuracy to a radar backscatter accuracy of 1 dB at 3 km resolution and a brightness temperature accuracy of 1.3 K at 40 km resolution. This presentation will describe the level 1 radar processing and calibration challenges and the choices made so far for the algorithms and software implementation. To obtain the desired high spatial resolution the level 1 radar ground processor employs synthetic aperture radar (SAR) imaging techniques. Part of the challenge of the SMAP data processing comes from doing SAR imaging on a conically scanned system with rapidly varying squint angles. The radar echo energy will be divided into range/Doppler bins using time domain processing algorithms that can easily follow the varying squint angle. For SMAP, projected range resolution is about 250 meters, while azimuth resolution varies from 400 meters to 1.2 km. Radiometric calibration of the SMAP radar means measuring, characterizing, and where necessary correcting the gain and noise contributions from every part of the system from the antenna radiation pattern all the way to the ground processing algorithms. The SMAP antenna pattern will be computed using an accurate antenna model, and then validated post-launch using homogeneous external targets such as the Amazon rain forest to look for uncorrected gain variation. Noise subtraction is applied after image processing using measurements from a noise only channel. Variations of the internal electronics are tracked by a loopback measurement which will capture most of the time and temperature variations of the transmit power and receiver gain. Long-term variations of system performance due to component aging will be tracked and corrected using stable external reference

  9. Radar Observation of Insects - Mosquitoes

    Science.gov (United States)

    Frost, E.; Downing, J.

    1979-01-01

    Tests were conducted at several sites over the coastal lowlands of New Jersey and over a region of high plains and low mountains in Oklahoma. In one area, a salt marsh in New Jersey, extensive ground tests were combined with laboratory data on expected insect backscatter to arrive at an extremely convincing model of the insect origin of most Dot Angels. A great deal of insight was studied from radar on the buildup and dispersal of insect swarms, since radar can follow where other means of trapping and observation cannot. Data on large-scale behavior as a function of wind and topography are presented. Displayed techniques which show individual or small swarm motion within some larger cloud or mass, or which can show the overall motion over great distances were developed. The influence of wind and terrain on insect motion and dispersal is determined from radar data.

  10. Scanning ARM Cloud Radar Handbook

    Energy Technology Data Exchange (ETDEWEB)

    Widener, K; Bharadwaj, N; Johnson, K

    2012-06-18

    The scanning ARM cloud radar (SACR) is a polarimetric Doppler radar consisting of three different radar designs based on operating frequency. These are designated as follows: (1) X-band SACR (X-SACR); (2) Ka-band SACR (Ka-SACR); and (3) W-band SACR (W-SACR). There are two SACRs on a single pedestal at each site where SACRs are deployed. The selection of the operating frequencies at each deployed site is predominantly determined by atmospheric attenuation at the site. Because RF attenuation increases with atmospheric water vapor content, ARM's Tropical Western Pacific (TWP) sites use the X-/Ka-band frequency pair. The Southern Great Plains (SGP) and North Slope of Alaska (NSA) sites field the Ka-/W-band frequency pair. One ARM Mobile Facility (AMF1) has a Ka/W-SACR and the other (AMF2) has a X/Ka-SACR.

  11. Radar research at The Pennsylvania State University Radar and Communications Laboratory

    Science.gov (United States)

    Narayanan, Ram M.

    2017-05-01

    The Radar and Communications Laboratory (RCL) at The Pennsylvania State University is at the forefront of radar technology and is engaged in cutting edge research in all aspects of radar, including modeling and simulation studies of novel radar paradigms, design and development of new types of radar architectures, and extensive field measurements in realistic scenarios. This paper summarizes the research at The Pennsylvania State University's Radar and Communications Laboratory and relevant collaborative research with several groups over the past 15 years in the field of radar and related technologies, including communications, radio frequency identification (RFID), and spectrum sensing.

  12. Radar operation in a hostile electromagnetic environment

    Energy Technology Data Exchange (ETDEWEB)

    Doerry, Armin Walter

    2014-03-01

    Radar ISR does not always involve cooperative or even friendly targets. An adversary has numerous techniques available to him to counter the effectiveness of a radar ISR sensor. These generally fall under the banner of jamming, spoofing, or otherwise interfering with the EM signals required by the radar sensor. Consequently mitigation techniques are prudent to retain efficacy of the radar sensor. We discuss in general terms a number of mitigation techniques.

  13. An MSK Waveform for Radar Applications

    Science.gov (United States)

    Quirk, Kevin J.; Srinivasan, Meera

    2009-01-01

    We introduce a minimum shift keying (MSK) waveform developed for use in radar applications. This waveform is characterized in terms of its spectrum, autocorrelation, and ambiguity function, and is compared with the conventionally used bi-phase coded (BPC) radar signal. It is shown that the MSK waveform has several advantages when compared with the BPC waveform, and is a better candidate for deep-space radar imaging systems such as NASA's Goldstone Solar System Radar.

  14. Wind Turbine Radar Cross Section

    Directory of Open Access Journals (Sweden)

    David Jenn

    2012-01-01

    Full Text Available The radar cross section (RCS of a wind turbine is a figure of merit for assessing its effect on the performance of electronic systems. In this paper, the fundamental equations for estimating the wind turbine clutter signal in radar and communication systems are presented. Methods of RCS prediction are summarized, citing their advantages and disadvantages. Bistatic and monostatic RCS patterns for two wind turbine configurations, a horizontal axis three-blade design and a vertical axis helical design, are shown. The unique electromagnetic scattering features, the effect of materials, and methods of mitigating wind turbine clutter are also discussed.

  15. Compressive sensing for urban radar

    CERN Document Server

    Amin, Moeness

    2014-01-01

    With the emergence of compressive sensing and sparse signal reconstruction, approaches to urban radar have shifted toward relaxed constraints on signal sampling schemes in time and space, and to effectively address logistic difficulties in data acquisition. Traditionally, these challenges have hindered high resolution imaging by restricting both bandwidth and aperture, and by imposing uniformity and bounds on sampling rates.Compressive Sensing for Urban Radar is the first book to focus on a hybrid of two key areas: compressive sensing and urban sensing. It explains how reliable imaging, tracki

  16. Comparison of mimo radar concepts: Detection performance

    NARCIS (Netherlands)

    Rossum, W.L. van; Huizing, A.G.

    2007-01-01

    In this paper, four different array radar concepts are compared: pencil beam, floodlight, monostatic MIMO, and multistatic MIMO. The array radar concepts show an increase in complexity accompanied by an increase in diversity. The comparison between the radar concepts is made by investigating the

  17. Comparison of mimo radar concepts: Detection performance

    NARCIS (Netherlands)

    Rossum, W.L. van; Huizing, A.G.

    2007-01-01

    In this paper, four different array radar concepts are compared: pencil beam, floodlight, monostatic MIMO, and multistatic MIMO. The array radar concepts show an increase in complexity accompanied by an increase in diversity. The comparison between the radar concepts is made by investigating the det

  18. 46 CFR 15.815 - Radar observers.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Radar observers. 15.815 Section 15.815 Shipping COAST... Computations § 15.815 Radar observers. (a) Each person in the required complement of deck officers, including... endorsement as radar observer. (b) Each person who is employed or serves as pilot in accordance with...

  19. 46 CFR 11.480 - Radar observer.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Radar observer. 11.480 Section 11.480 Shipping COAST... ENDORSEMENTS Professional Requirements for Deck Officers § 11.480 Radar observer. (a) This section contains the requirements that an applicant must meet to qualify as a radar observer. (Part 15 of this chapter specifies...

  20. 46 CFR 130.310 - Radar.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Radar. 130.310 Section 130.310 Shipping COAST GUARD... EQUIPMENT AND SYSTEMS Navigational Equipment § 130.310 Radar. Each vessel of 100 or more gross tons must be fitted with a general marine radar in the pilothouse. ...

  1. 46 CFR 108.717 - Radar.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Radar. 108.717 Section 108.717 Shipping COAST GUARD... Miscellaneous Equipment § 108.717 Radar. Each self-propelled unit of 1,600 gross tons and over in ocean or coastwise service must have— (a) A marine radar system for surface navigation; and (b) Facilities on the...

  2. 46 CFR 167.40-40 - Radar.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Radar. 167.40-40 Section 167.40-40 Shipping COAST GUARD... Requirements § 167.40-40 Radar. All mechanically propelled vessels of 1,600 gross tons and over in ocean or coastwise service must be fitted with a marine radar system for surface navigation. Facilities for plotting...

  3. Efficient Ways to Learn Weather Radar Polarimetry

    Science.gov (United States)

    Cao, Qing; Yeary, M. B.; Zhang, Guifu

    2012-01-01

    The U.S. weather radar network is currently being upgraded with dual-polarization capability. Weather radar polarimetry is an interdisciplinary area of engineering and meteorology. This paper presents efficient ways to learn weather radar polarimetry through several basic and practical topics. These topics include: 1) hydrometeor scattering model…

  4. Principles of modern radar advanced techniques

    CERN Document Server

    Melvin, William

    2012-01-01

    Principles of Modern Radar: Advanced Techniques is a professional reference for practicing engineers that provides a stepping stone to advanced practice with in-depth discussions of the most commonly used advanced techniques for radar design. It will also serve advanced radar academic and training courses with a complete set of problems for students as well as solutions for instructors.

  5. Comparison of mimo radar concepts: Detection performance

    NARCIS (Netherlands)

    Rossum, W.L. van; Huizing, A.G.

    2007-01-01

    In this paper, four different array radar concepts are compared: pencil beam, floodlight, monostatic MIMO, and multistatic MIMO. The array radar concepts show an increase in complexity accompanied by an increase in diversity. The comparison between the radar concepts is made by investigating the det

  6. FMCW Radar with Broadband Communication Capability

    NARCIS (Netherlands)

    Barrenechea, P.; Elferink, F.H.; Janssen, J.A.A.J.

    2007-01-01

    The use of amplitude modulation to encode information onto an FMCW radar signal is proposed in this paper. This new technique, that has been named AM-FMCW communicating radar, provides a new channel for broadband communication by reusing the radar frequencies and without introducing any distortion i

  7. Efficient Ways to Learn Weather Radar Polarimetry

    Science.gov (United States)

    Cao, Qing; Yeary, M. B.; Zhang, Guifu

    2012-01-01

    The U.S. weather radar network is currently being upgraded with dual-polarization capability. Weather radar polarimetry is an interdisciplinary area of engineering and meteorology. This paper presents efficient ways to learn weather radar polarimetry through several basic and practical topics. These topics include: 1) hydrometeor scattering model…

  8. Radar Chaff: A Bibliography

    Science.gov (United States)

    1983-11-01

    a cylindrical antenna with a delta-function generator is examined for from one to 30 iterations. It is shown that for Boa _ 0.1 or a/ < 0.016 (where a...When Boa s 0.1, the second-order corrected admittance is essentially the same when calculated with either the exact kernel for the tubular antenna or...optics can be used. When the body dimensicns are only moderately large with respect to the wavelength, Fock or Franz theory can be applied, and examples

  9. Prospects of Dynamical Determination of General Relativity Parameter β and Solar Quadrupole Moment {J}_{2\\odot } with Asteroid Radar Astronomy

    Science.gov (United States)

    Verma, Ashok K.; Margot, Jean-Luc; Greenberg, Adam H.

    2017-08-01

    We evaluated the prospects of quantifying the parameterized post-Newtonian parameter β and solar quadrupole moment {J}2⊙ with observations of near-Earth asteroids with large orbital precession rates (9 to 27 arcsec century-1). We considered existing optical and radar astrometry, as well as radar astrometry that can realistically be obtained with the Arecibo planetary radar in the next five years. Our sensitivity calculations relied on a traditional covariance analysis and Monte Carlo simulations. We found that independent estimates of β and {J}2⊙ can be obtained with precisions of 6 × 10-4 and 3 × 10-8, respectively. Because we assumed rather conservative observational uncertainties, as is the usual practice when reporting radar astrometry, it is likely that the actual precision will be closer to 2 × 10-4 and 10-8, respectively. A purely dynamical determination of solar oblateness with asteroid radar astronomy may therefore rival the helioseismology determination.

  10. Multibeam monopulse radar for airborne sense and avoid system

    Science.gov (United States)

    Gorwara, Ashok; Molchanov, Pavlo

    2016-10-01

    The multibeam monopulse radar for Airborne Based Sense and Avoid (ABSAA) system concept is the next step in the development of passive monopulse direction finder proposed by Stephen E. Lipsky in the 80s. In the proposed system the multibeam monopulse radar with an array of directional antennas is positioned on a small aircaraft or Unmanned Aircraft System (UAS). Radar signals are simultaneously transmitted and received by multiple angle shifted directional antennas with overlapping antenna patterns and the entire sky, 360° for both horizontal and vertical coverage. Digitizing of amplitude and phase of signals in separate directional antennas relative to reference signals provides high-accuracy high-resolution range and azimuth measurement and allows to record real time amplitude and phase of reflected from non-cooperative aircraft signals. High resolution range and azimuth measurement provides minimal tracking errors in both position and velocity of non-cooperative aircraft and determined by sampling frequency of the digitizer. High speed sampling with high-accuracy processor clock provides high resolution phase/time domain measurement even for directional antennas with wide Field of View (FOV). Fourier transform (frequency domain processing) of received radar signals provides signatures and dramatically increases probability of detection for non-cooperative aircraft. Steering of transmitting power and integration, correlation period of received reflected signals for separate antennas (directions) allows dramatically decreased ground clutter for low altitude flights. An open architecture, modular construction allows the combination of a radar sensor with Automatic Dependent Surveillance - Broadcast (ADS-B), electro-optic, acoustic sensors.

  11. Radar sensing via a Micro-UAV-borne system

    Science.gov (United States)

    Catapano, Ilaria; Ludeno, Giovanni; Gennarelli, Gianluca; Soldovieri, Francesco; Rodi Vetrella, Amedeo; Fasano, Giancarmine

    2017-04-01

    In recent years, the miniaturization of flight control systems and payloads has contributed to a fast and widespread diffusion of micro-UAV (Unmanned Aircraft Vehicle). While micro-UAV can be a powerful tool in several civil applications such as environmental monitoring and surveillance, unleashing their full potential for societal benefits requires augmenting their sensing capability beyond the realm of active/passive optical sensors [1]. In this frame, radar systems are drawing attention since they allow performing missions in all-weather and day/night conditions and, thanks to the microwave ability to penetrate opaque media, they enable the detection and localization not only of surface objects but also of sub-surface/hidden targets. However, micro-UAV-borne radar imaging represents still a new frontier, since it is much more than a matter of technology miniaturization or payload installation, which can take advantage of the newly developed ultralight systems. Indeed, micro-UAV-borne radar imaging entails scientific challenges in terms of electromagnetic modeling and knowledge of flight dynamics and control. As a consequence, despite Synthetic Aperture Radar (SAR) imaging is a traditional remote sensing tool, its adaptation to micro-UAV is an open issue and so far only few case studies concerning the integration of SAR and UAV technologies have been reported worldwide [2]. In addition, only early results concerning subsurface imaging by means of an UAV-mounted radar are available [3]. As a contribution to radar imaging via autonomous micro-UAV, this communication presents a proof-of-concept experiment. This experiment represents the first step towards the development of a general methodological approach that exploits expertise about (sub-)surface imaging and aerospace systems with the aim to provide high-resolution images of the surveyed scene. In details, at the conference, we will present the results of a flight campaign carried out by using a single radar

  12. Synthetic aperture radar capabilities in development

    Energy Technology Data Exchange (ETDEWEB)

    Miller, M. [Lawrence Livermore National Lab., CA (United States)

    1994-11-15

    The Imaging and Detection Program (IDP) within the Laser Program is currently developing an X-band Synthetic Aperture Radar (SAR) to support the Joint US/UK Radar Ocean Imaging Program. The radar system will be mounted in the program`s Airborne Experimental Test-Bed (AETB), where the initial mission is to image ocean surfaces and better understand the physics of low grazing angle backscatter. The Synthetic Aperture Radar presentation will discuss its overall functionality and a brief discussion on the AETB`s capabilities. Vital subsystems including radar, computer, navigation, antenna stabilization, and SAR focusing algorithms will be examined in more detail.

  13. Mars Radar Opens a Planet's Third Dimension

    Science.gov (United States)

    2008-01-01

    Radar sounder instruments orbiting Mars have looked beneath the Martian surface and opened up the third dimension for planetary exploration. The technique's success is prompting scientists to think of all the other places in the Solar System where they would like to use radar sounders. The first radar sounder at Mars was the Mars Advanced Radar for Subsurface and Ionospheric Sounding (MARSIS) on the European Space Agency's Mars Express Orbiter. It has been joined by the complementary Shallow Subsurface Radar (SHARAD), operating at a different wavelength aboard NASA's Mars Reconnaissance Orbiter. The data in this animation are from SHARAD.

  14. Radar for Mapping Sea Ice

    Science.gov (United States)

    Barath, F. T.; Jordan, R. L.

    1983-01-01

    X-band system has 100-m2 resolution. Wide swath imaging radar of synthetic aperature type transmits signal to ground station for subsequent processing into imagery. Concept meets functional requirements for continuously mapping sea ice in north and south polar regions.

  15. Measurements of radar ground returns

    NARCIS (Netherlands)

    Loor, G.P. de

    1974-01-01

    The ground based measurement techniques for the determination of the radar back-scatter of vegetation and soils as used in The Netherlands will be described. Two techniques are employed: one covering a large sample area (> 1000 m2) but working at low grazing angels only and one (short range) coverin

  16. Wind Retrieval using Marine Radars

    Science.gov (United States)

    2011-09-30

    Interaction (HiRes) DRI the NATO Undersea Research Center ( NURC ) wants to develop and validate methodologies to retrieve wind field parameters from X-band...marine radar. The main parameters NURC will focus on are the mean surface wind vector as well as the wind gusts in vicinity of the measurement platform

  17. High-Resolution Instrumentation Radar.

    Science.gov (United States)

    1986-09-30

    30 September 1986 Los Angeles Air Force Station 13. NUMBER OF PAGES Los Angeles, Calif. 90009-2960 36 74. MONITORING AGENCY NAME & ADDRESS(If...TREE PLMUT ",-20 -CUTLIASS DumpER SED AN... TREE TRUNK, -0 - MERC BUMPER f - 40 H!-I -50 iI Fig. 7. High-Resolution Instrumentation Radar View of

  18. Planetary Radars Operating Centre PROC

    Science.gov (United States)

    Catallo, C.; Flamini, E.; Seu, R.; Alberti, G.

    2007-12-01

    Planetary exploration by means of radar systems, mainly using Ground Penetrating Radars (GPR) plays an important role in Italy. Numerous scientific international space programs are currently carried out jointly with ESA and NASA by Italian Space Agency, the scientific community and the industry. Three important experiments under Italian leadership ( designed and manufactured by the Italian industry), provided by ASI either as contribution to ESA programs either within a NASA/ASI joint venture framework, are now operating: MARSIS on-board Mars Express, SHARAD on-board Mars Reconnaissance Orbiter and CASSINI Radar on-board Cassini spacecraft. In order to support all the scientific communities, institutional customers and experiment teams operation three Italian dedicated operational centers have been realized, namely SHOC, (Sharad Operating Centre), MOC (Marsis Operating Center) and CASSINI PAD ( Processing Altimetry Data). Each center is dedicated to a single instrument management and control, data processing and distribution. Although they had been conceived to operate autonomously and independently one from each other, synergies and overlaps have been envisaged leading to the suggestion of a unified center, the Planetary Radar Processing Center (PROC). PROC is conceived in order to include the three operational centers, namely SHOC, MOC and CASSINI PAD, either from logistics point of view and from HW/SW capabilities point of view. The Planetary Radar Processing Center shall be conceived as the Italian support facility to the scientific community for on-going and future Italian planetary exploration programs. Therefore, scalability, easy use and management shall be the design drivers. The paper describes how PROC is designed and developed, to allow SHOC, MOC and CASSINI PAD to operate as before, and to offer improved functionalities to increase capabilities, mainly in terms of data exchange, comparison, interpretation and exploitation. Furthermore, in the frame of

  19. Monitoring by holographic radar systems

    Science.gov (United States)

    Catapano, Ilaria; Crocco, Lorenzo; Affinito, Antonio; Gennarelli, Gianluca; Soldovieri, Francesco

    2013-04-01

    Nowadays, radar technology represents a significant opportunity to collect useful information for the monitoring and conservation of critical infrastructures. Radar systems exploit the non-invasive interaction between the matter and the electromagnetic waves at microwave frequencies. Such an interaction allows obtaining images of the region under test from which one can infer the presence of potential anomalies such as deformations, cracks, water infiltrations, etc. This information turns out to be of primary importance in practical scenarios where the probed structure is in a poor state of preservation and renovation works must be planned. In this framework, the aim of this contribution is to describe the potentialities of the holographic radar Rascan 4/4000, a holographic radar developed by Remote Sensing Laboratory of Bauman Moscow State Technical University, as a non-destructive diagnostic tool capable to provide, in real-time, high resolution subsurface images of the sounded structure [1]. This radar provides holograms of hidden anomalies from the amplitude of the interference signal arising between the backscattered signal and a reference signal. The performance of the holographic radar is appraised by means of several experiments. Preliminary tests concerning the imaging below the floor and inside wood structures are carried out in controlled conditions at the Electromagnetic Diagnostic Laboratory of IREA-CNR. After, with reference to bridge monitoring for security aim, the results of a measurement campaign performed on the Musmeci bridge are presented [2]. Acknowledgments This research has been performed in the framework of the "Active and Passive Microwaves for Security and Subsurface imaging (AMISS)" EU 7th Framework Marie Curie Actions IRSES project (PIRSES-GA-2010-269157). REFERENCES [1] S. Ivashov, V. Razevig, I. Vasilyev, A. Zhuravlev, T. Bechtel, L. Capineri, The holographic principle in subsurface radar technology, International Symposium to

  20. Verification and validation of the simulated radar image (SRIM) code radar cross section predictions

    Science.gov (United States)

    Stanley, Dale A.

    1991-12-01

    The objectives of this study were to verify and validate the Simulated Radar Image (SRIM) Code Version 4.0 monostatic radar cross section (RCS) predictions. SRIM, uses the theory of Physical Optics (PO) to predict backscatter for a user specified aspect angle. Target obscuration and multiple reflections are taken into account by sampling the target with ray tracing. The software verification and validation technique followed in this study entailed comparing the code predictions to closed form PO equations, other RCS prediction software packages, and measured data. The targets analyzed were a sphere, rectangular flat plate, circular flat plate, solid right circular cylinder, dihedral and trihedral corner reflectors, top hat, cone, prolate spheroid, and generic missile. SRIM RCS predictions are shown for each target as a function of frequency, aspect angle, and ray density. Also presented is an automation technique that enables the user to run SRIM sequentially over a range of azimuth angles. The FORTRAN code written by the author for the PO equations is also provided.

  1. Status and Prospects of Radar Polarimetry Techniques

    Directory of Open Access Journals (Sweden)

    Wang Xuesong

    2016-04-01

    Full Text Available Radar polarimetry is an applied fundamental science field that is focused on understanding interaction processes between radar waves and targets and disclosing their mechanisms. Radar polarimetry has significant application prospects in the fields of microwave remote sensing, earth observation, meteorological measurement, battlefield reconnaissance, anti-interference, target recognition, and so on. This study briefly reviews the development history of radar polarization theory and technology. Next, the state of the art of several key technologies within radar polarimetry, including the precise acquisition of radar polarization information, polarization-sensitive array signal processing, target polarization characteristics, polarization antiinterference, and target polarization classification and recognition, is summarized. Finally, the future developments of radar polarization technology are considered.

  2. Radar research at the University of Kansas

    Science.gov (United States)

    Blunt, Shannon D.; Allen, Christopher; Arnold, Emily; Hale, Richard; Hui, Rongqing; Keshmiri, Shahriar; Leuschen, Carlton; Li, Jilu; Paden, John; Rodriguez-Morales, Fernando; Salandrino, Alessandro; Stiles, James

    2017-05-01

    Radar research has been synonymous with the University of Kansas (KU) for over half a century. As part of this special session organized to highlight significant radar programs in academia, this paper surveys recent and ongoing work at KU. This work encompasses a wide breadth of sensing applications including the remote sensing of ice sheets, autonomous navigation methods for unmanned aerial vehicles (UAVs), novel laser radar capabilities, detection of highenergy cosmic rays using bistatic radar, different forms of waveform diversity such as MIMO radar and pulse agility, and various radar-embedded communication methods. The results of these efforts impact our understanding of the changing nature of the environment, address the proliferation of unmanned systems in the US airspace, realize new sensing modalities enabled by the joint consideration of electromagnetics and signal processing, and greater facilitate radar operation in an increasingly congested and contested spectrum.

  3. Basic Radar Altimetry Toolbox & Tutorial

    Science.gov (United States)

    Rosmorduc, Vinca; Benveniste, Jerome; Breebaart, Leo; Bronner, Emilie; Dinardo, Salvatore; Earith, Didier; Lucas, Bruno Manuel; Niejmeier, Sander; Picot, Nicolas

    2010-12-01

    The Basic Radar Altimetry Toolbox is an "all-altimeter" collection of tools, tutorials and documents designed to facilitate the use of radar altimetry data, including the last mission launched, CryoSat. It has been available from April 2007, and had been demonstrated during training courses and scientific meetings. Nearly 1200 people downloaded it (as of end of June 2010), with many "newcomers" to altimetry among them. Users' feedbacks, developments in altimetry, and practice, showed that new interesting features could be added. Some have been added and/or improved in version 2. Others are ongoing, some are in discussion. The Basic Radar Altimetry Toolbox is able: - to read most distributed radar altimetry data, from ERS-1 & 2, Topex/Poseidon, Geosat Follow-on, Jason- 1, Envisat, Jason- 2, CryoSat and also the future Saral and Sentinel 3 missions, - to perform some processing, data editing and statistic, - and to visualize the results. It can be used at several levels/several ways: - as a data reading tool, with APIs for C, Fortran, Matlab and IDL - as processing/extraction routines, through the on-line command mode - as an educational and a quick-look tool both, with the graphical user interface As part of the Toolbox, a Radar Altimetry Tutorial gives general information about altimetry, the technique involved and its applications, as well as an overview of past, present and future missions, including information on how to access data, additional software and documentation. It also presents a series of data use cases, covering all uses of altimetry over ocean, cryosphere and land, showing the basic methods for some of the most frequent manners of using altimetry data. BRAT is developed under contract with ESA and CNES. It is available at http://www.altimetry.info and http://earth.esa.int/brat/

  4. Micro pulse laser radar

    Science.gov (United States)

    Spinhirne, James D. (Inventor)

    1993-01-01

    An eye safe, compact, solid state lidar for profiling atmospheric cloud and aerosol scattering is disclosed. The transmitter of the micro pulse lidar is a diode pumped micro-J pulse energy, high repetition rate Nd:YLF laser. Eye safety is obtained through beam expansion. The receiver employs a photon counting solid state Geiger mode avalanche photodiode detector. Data acquisition is by a single card multichannel scaler. Daytime background induced quantum noise is controlled by a narrow receiver field-of-view and a narrow bandwidth temperature controlled interference filter. Dynamic range of the signal is limited to optical geometric signal compression. Signal simulations and initial atmospheric measurements indicate that micropulse lider systems are capable of detecting and profiling all significant cloud and aerosol scattering through the troposphere and into the stratosphere. The intended applications are scientific studies and environmental monitoring which require full time, unattended measurements of the cloud and aerosol height structure.

  5. Accurate Characterization of Winter Precipitation Using Multi-Angle Snowflake Camera, Visual Hull, Advanced Scattering Methods and Polarimetric Radar

    Directory of Open Access Journals (Sweden)

    Branislav M. Notaroš

    2016-06-01

    Full Text Available This article proposes and presents a novel approach to the characterization of winter precipitation and modeling of radar observables through a synergistic use of advanced optical disdrometers for microphysical and geometrical measurements of ice and snow particles (in particular, a multi-angle snowflake camera—MASC, image processing methodology, advanced method-of-moments scattering computations, and state-of-the-art polarimetric radars. The article also describes the newly built and established MASCRAD (MASC + Radar in-situ measurement site, under the umbrella of CSU-CHILL Radar, as well as the MASCRAD project and 2014/2015 winter campaign. We apply a visual hull method to reconstruct 3D shapes of ice particles based on high-resolution MASC images, and perform “particle-by-particle” scattering computations to obtain polarimetric radar observables. The article also presents and discusses selected illustrative observation data, results, and analyses for three cases with widely-differing meteorological settings that involve contrasting hydrometeor forms. Illustrative results of scattering calculations based on MASC images captured during these events, in comparison with radar data, as well as selected comparative studies of snow habits from MASC, 2D video-disdrometer, and CHILL radar data, are presented, along with the analysis of microphysical characteristics of particles. In the longer term, this work has potential to significantly improve the radar-based quantitative winter-precipitation estimation.

  6. Alpine radar conversion for LAWR

    Science.gov (United States)

    Savina, M.; Burlando, P.

    2012-04-01

    The Local Area Weather Radar (LAWR) is a ship-born weather radar system operating in X-band developed by the DHI Group to detect precipitation in urban areas. To date more than thirty units are installed in different settings around the world. A LAWR was also deployed in the Alps, at 3883 m a.s.l. on the Kl. Matterhorn (Valais, Switzerland). This was the highest LAWR of the world and it led to the development of an Alpine LAWR system that, besides featuring important technological improvements needed to withstand the severe Alpine conditions, required the development of a new Alpine Radar COnversion Model (ARCOM), which is the main focus of this contribution. The LAWR system is equipped with the original FURUNO fan-beam slotted antenna and the original logarithmic receiver, which limits the radar observations to the video signal (L) withour providing the reflectivity (Z). The beam is 0.95 deg wide and 20 deg high. It can detect precipitation to a max range of 60 km. In order to account for the limited availability of raw signal and information and the specific mountain set-up, the conversion model had to be developed differently from the state-of-the-art radar conversion technique used for this class of radars. In particular, the ARCOM is based on a model used to simulate a spatial dependent factor, hereafter called ACF, which is in turn function of parameters that take in account climatological conditions, also used in other conversion methods, but additionally accounting for local radar beam features and for orographic forcings such as the effective sampling power (sP), which is modelled by means of antenna pattern, geometric ground clutter and their interaction. The result is a conversion factor formulated to account for a range correction that is based on the increase of the sampling volume, partial beam blocking and local climatological conditions. The importance of the latter in this study is double with respect to the standard conversion technique for this

  7. RJARS: RAND’s Version of the Jamming Aircraft and Radar Simulation

    Science.gov (United States)

    1991-01-01

    29 C. UPDTR--Over-Terrain Visibility........................ 32 D. UPDRS --Update Search Radars........................... 36 1...179 A.5. Update Searchers ( UPDRS ) Flow Chart ....................... 180 A.6. Update Optical Search and Acquisition Flow Chart...RJARS contains 11 updating modules: 1. UPDCK System clock 2. UPDAC Aircraft positions and maneuvers 3. UPDTR Over-terrain visibility 4. UPDRS Search

  8. Advances in Ice Penetrating Radar

    Science.gov (United States)

    Paden, J. D.

    2016-12-01

    Radars have been employed for ice remote sensing since the mid-twentieth century. The original application in radioglaciology was to obtain ice thickness: an essential parameter in ice flux calculations and boundary condition in ice flow models. Later, radars were used to estimate basal conditions and track laterally persistent features in the ice. The Center for Remote Sensing of Ice Sheet's recent hardware advances include multichannel systems and radar suites covering the usable frequency spectrum. These advances coupled with increased interest in the polar regions result in a concomitant exponential growth in data. We focus on a few results that have come from these changes. Multichannel radar systems improved clutter rejection and enabled 3D imaging. Using computer vision algorithms, we have automated the process of extracting the ice bottom surface in 3D imagery for complex topographies including narrow glacier channels where the ice surface and ice bottom merge together within the 3D images. We present results of wide swath imaging which have enabled narrow, 2-3 km wide, glacier channels to be fully imaged in a single pass. When radar data are available across the frequency spectrum, we have the ability to enhance target detection and measure frequency dependent properties. For example, we can couple HF sounder measurements in warmer ice where scattering attenuates and hides the signal of interest with VHF sounder measurements in cooler ice which have much improved resolution from a single flight line. We present examples of improved bed detection with coupled HF and VHF imagery in a temperate to cold ice transition that show the strong frequency dependence of englacial scattering. To handle the increased data rate, we developed a standard processing chain and data product for CReSIS radar systems, including legacy systems. Application specific GIS tools are an essential part and enable us to merge other data products during data analysis. By using imagery

  9. Penn State Radar Systems: Implementation and Observations

    Science.gov (United States)

    Urbina, J. V.; Seal, R.; Sorbello, R.; Kuyeng, K.; Dyrud, L. P.

    2014-12-01

    Software Defined Radio/Radar (SDR) platforms have become increasingly popular as researchers, hobbyists, and military seek more efficient and cost-effective means for radar construction and operation. SDR platforms, by definition, utilize a software-based interface for configuration in contrast to traditional, hard-wired platforms. In an effort to provide new and improved radar sensing capabilities, Penn State has been developing advanced instruments and technologies for future radars, with primary objectives of making such instruments more capable, portable, and more cost effective. This paper will describe the design and implementation of two low-cost radar systems and their deployment in ionospheric research at both low and mid-latitudes. One radar has been installed near Penn State campus, University Park, Pennsylvania (77.97°W, 40.70°N), to make continuous meteor observations and mid-latitude plasma irregularities. The second radar is being installed in Huancayo (12.05°S, -75.33°E), Peru, which is capable of detecting E and F region plasma irregularities as well as meteor reflections. In this paper, we examine and compare the diurnal and seasonal variability of specular, non- specular, and head-echoes collected with these two new radar systems and discuss sampling biases of each meteor observation technique. We report our current efforts to validate and calibrate these radar systems with other VHF radars such as Jicamarca and SOUSY. We also present the general characteristics of continuous measurements of E-region and F-region coherent echoes using these modern radar systems and compare them with coherent radar events observed at other geographic mid-latitude radar stations.

  10. Wetland Mapping in the Zhalong Natural Reserve Using Optical and Radar Remotely Sensed Data and Ancillary Topographical Data%兼容光学雷达影像及地形辅助数据的扎龙湿地遥感分类

    Institute of Scientific and Technical Information of China (English)

    刘蕾; 臧淑英; 那晓东; 裴雪原

    2013-01-01

    This study develops an expedient digital mapping technique using passive optical remotely sensed imagery of the Landsat Thematic Mapper(TM) ,Envisat ASAR active radar C-band imagery,and topographical indices. All data inputs were re-sampled to a common 30 m resolution grid. An ensemble classifier based on trees (Random Forest for example) procedure was employed to produce a final map of per-grid cell wetland probability map. A detailed accuracy assessment showed that ancillary topographical data and radar backscattering coefficients effected prominently in contributing to the classification tree procedure, reinforcing the idea that multi-source data are useful in the characterization of wetland land cover. Random Forest (RF) produced the highest overall accuracy (92. 6%) and the Kappa coefficient is 0. 901, with marsh class accuracy 96. 3%. It outperforms standard approaches like a single classification and regression tree (CART) and a conventional maximum likelihood classification (MLC). The method employed freely available data and a fully automated process. This study provides a fast,efficient remote sensing classification method of freshwater marsh wetland and has an important meaning in wetland information extraction, management and protection.%结合Landsat TM影像、Envisat ASAR的C波段雷达影像和地形辅助数据,采用决策树方法,包括分类回归树(Classification and Regression Tree,CART)和随机森林(Random Forest,RF)算法,对扎龙湿地进行遥感分类.用实测GPS样本点对分类结果进行精度验证,并与最大似然监督分类方法(Maximum Likelihood Classification,MLC)对比.结果表明,地形辅助数据和雷达后向散射系数对湿地分类精度的提高起重要作用.基于RF算法分类结果的总精度和Kappa系数分别为92.6%和0.901,沼泽湿地的分类精度达到96.3%,较CART算法和MLC监督分类方法有明显提高.该研究提供了一种快速、高效的内陆淡水沼泽湿地遥感分类技术.

  11. Detecting and classifying low probability of intercept radar

    CERN Document Server

    Pace, Philip E

    2008-01-01

    This revised and expanded second edition brings you to the cutting edge with new chapters on LPI radar design, including over-the-horizon radar, random noise radar, and netted LPI radar. You also discover critical LPI detection techniques, parameter extraction signal processing techniques, and anti-radiation missile design strategies to counter LPI radar.

  12. MIMO Radar Using Compressive Sampling

    CERN Document Server

    Yu, Yao; Poor, H Vincent

    2009-01-01

    A MIMO radar system is proposed for obtaining angle and Doppler information on potential targets. Transmitters and receivers are nodes of a small scale wireless network and are assumed to be randomly scattered on a disk. The transmit nodes transmit uncorrelated waveforms. Each receive node applies compressive sampling to the received signal to obtain a small number of samples, which the node subsequently forwards to a fusion center. Assuming that the targets are sparsely located in the angle- Doppler space, based on the samples forwarded by the receive nodes the fusion center formulates an l1-optimization problem, the solution of which yields target angle and Doppler information. The proposed approach achieves the superior resolution of MIMO radar with far fewer samples than required by other approaches. This implies power savings during the communication phase between the receive nodes and the fusion center. Performance in the presence of a jammer is analyzed for the case of slowly moving targets. Issues rel...

  13. Array radars solve communication jams

    Science.gov (United States)

    Lewis, H. D.

    1982-04-01

    The possibilities of incorporating mobile radar units as slave stations in communications relay applications during times of disrupted communications is examined. The limitations on uses of search, tracking, and multifunction radars are examined, noting that employment of the mobile system entails some tracking by the master phased-arrays to keep the mobile units in focus. The tracking patterns and dwell times are outlined, and the possibility of 700-1000 dwell times of 1220 microsec duration/sec is mentioned as opening the opportunity for high quality data transmissions. Signal-to-noise ratios are formulated for jamming situations, with offsetting tactical features for the jamming including the directivity and gain of the master antenna, the master station's power aperture product, on-axis to off-axis gain ratio, and antenna positioning ability. A slave station must be equipped with a transponder for communications, which are best achieved with pseudo-random coded waveforms.

  14. Reliability of Naval Radar Systems

    Science.gov (United States)

    1978-09-01

    CONFIDENTIAL (THIS PACE IS UNCUIASSFIED) CONFIDENTIAL (U) For airborne radars, 3-M’(Maintenance and Material Management )and RISE (Readiness Improvement...of the 3-M Program reports (3-M from Maintenance and Material Management ) as well as Naval Air Systems Command RISE (Readi-. ness Improvement Summary...TRANSIT PULSE LE11CTR (;As): 12.8 ANTENNA UEIGHr (k 1058 (2331 lbs.) excluding pedestal COMPRESSED PLUE LENGTH (.is): 0.2 BEAN POSITIObiNG TECNIQUES : H)RZ

  15. Radar Control Optimal Resource Allocation

    Science.gov (United States)

    2015-07-13

    Campaign as shown in Figure 7. This radar is an experimental frequency agile, high-resolution originally developed for the purpose of iceberg detection...Information Theory , Under Review 2015. [24] A. Pezeshki, A. Calderbank, W. Moran, and S. Howard, “Doppler resilient golay complemn- tary waveforms...IEEE Transactions on Information Theory , vol. 54, no. 9, pp. 4254–4266, 2008. [25] W. Dang, A. Pezeshki, S. Howard, B. Moran, and R. Calderbank

  16. Radar based autonomous sensor module

    Science.gov (United States)

    Styles, Tim

    2016-10-01

    Most surveillance systems combine camera sensors with other detection sensors that trigger an alert to a human operator when an object is detected. The detection sensors typically require careful installation and configuration for each application and there is a significant burden on the operator to react to each alert by viewing camera video feeds. A demonstration system known as Sensing for Asset Protection with Integrated Electronic Networked Technology (SAPIENT) has been developed to address these issues using Autonomous Sensor Modules (ASM) and a central High Level Decision Making Module (HLDMM) that can fuse the detections from multiple sensors. This paper describes the 24 GHz radar based ASM, which provides an all-weather, low power and license exempt solution to the problem of wide area surveillance. The radar module autonomously configures itself in response to tasks provided by the HLDMM, steering the transmit beam and setting range resolution and power levels for optimum performance. The results show the detection and classification performance for pedestrians and vehicles in an area of interest, which can be modified by the HLDMM without physical adjustment. The module uses range-Doppler processing for reliable detection of moving objects and combines Radar Cross Section and micro-Doppler characteristics for object classification. Objects are classified as pedestrian or vehicle, with vehicle sub classes based on size. Detections are reported only if the object is detected in a task coverage area and it is classified as an object of interest. The system was shown in a perimeter protection scenario using multiple radar ASMs, laser scanners, thermal cameras and visible band cameras. This combination of sensors enabled the HLDMM to generate reliable alerts with improved discrimination of objects and behaviours of interest.

  17. Radar channel balancing with commutation

    Energy Technology Data Exchange (ETDEWEB)

    Doerry, Armin Walter

    2014-02-01

    When multiple channels are employed in a pulse-Doppler radar, achieving and maintaining balance between the channels is problematic. In some circumstances the channels may be commutated to achieve adequate balance. Commutation is the switching, trading, toggling, or multiplexing of the channels between signal paths. Commutation allows modulating the imbalance energy away from the balanced energy in Doppler, where it can be mitigated with filtering.

  18. Radar-based rainfall estimation: Improving Z/R relations through comparison of drop size distributions, rainfall rates and radar reflectivity patterns

    Science.gov (United States)

    Neuper, Malte; Ehret, Uwe

    2014-05-01

    The relation between the measured radar reflectivity factor Z and surface rainfall intensity R - the Z/R relation - is profoundly complex, so that in general one speaks about radar-based quantitative precipitation estimation (QPE) rather than exact measurement. Like in Plato's Allegory of the Cave, what we observe in the end is only the 'shadow' of the true rainfall field through a very small backscatter of an electromagnetic signal emitted by the radar, which we hope has been actually reflected by hydrometeors. The meteorological relevant and valuable Information is gained only indirectly by more or less justified assumptions. One of these assumptions concerns the drop size distribution, through which the rain intensity is finally associated with the measured radar reflectivity factor Z. The real drop size distribution is however subject to large spatial and temporal variability, and consequently so is the true Z/R relation. Better knowledge of the true spatio-temporal Z/R structure therefore has the potential to improve radar-based QPE compared to the common practice of applying a single or a few standard Z/R relations. To this end, we use observations from six laser-optic disdrometers, two vertically pointing micro rain radars, 205 rain gauges, one rawindsonde station and two C-band Doppler radars installed or operated in and near the Attert catchment (Luxembourg). The C-band radars and the rawindsonde station are operated by the Belgian and German Weather Services, the rain gauge data was partly provided by the French, Dutch, Belgian, German Weather Services and the Ministry of Agriculture of Luxembourg and the other equipment was installed as part of the interdisciplinary DFG research project CAOS (Catchment as Organized Systems). With the various data sets correlation analyzes were executed. In order to get a notion on the different appearance of the reflectivity patterns in the radar image, first of all various simple distribution indices (for example the

  19. Convolutional neural networks for synthetic aperture radar classification

    Science.gov (United States)

    Profeta, Andrew; Rodriguez, Andres; Clouse, H. Scott

    2016-05-01

    For electro-optical object recognition, convolutional neural networks (CNNs) are the state-of-the-art. For large datasets, CNNs are able to learn meaningful features used for classification. However, their application to synthetic aperture radar (SAR) has been limited. In this work we experimented with various CNN architectures on the MSTAR SAR dataset. As the input to the CNN we used the magnitude and phase (2 channels) of the SAR imagery. We used the deep learning toolboxes CAFFE and Torch7. Our results show that we can achieve 93% accuracy on the MSTAR dataset using CNNs.

  20. Investigation of Simulating Radar Images Concerning the Multipath Scattering Effect

    Institute of Scientific and Technical Information of China (English)

    Yang Chun-hua; Zhu Guo-qiang

    2004-01-01

    In the composed system of a target and rough surface, the electromagnetic scattering mechanism, especially the multipath scattering, is investigated. Using physical optics double bouncing algorithm, the multipath scattering model of the system has been established. Simulated by a wideband radar signal and based on fractal rough surface. the artificial echo of the target has been obtained in virtue of the established multipath scattering model. By simulating to image the target in one dimension using the artificial echo, two kinds of range profiles are attained. It is found that one is from the target and the other is from the multipath scattering effect.

  1. Hybrid lidar radar receiver for underwater imaging applications

    Science.gov (United States)

    Seetamraju, Madhavi; Gurjar, Rajan; Squillante, Michael; Derderian, Jeffrey P.

    2009-05-01

    In this work, we present research performed to improve the receiver characteristics for underwater imaging applications using the hybrid lidar-radar detection technique. We report the development of the next-generation coherent heterodyne receiver using modulation of the optical receiver's amplifier gain. Significant advantages in the receiver specifications are achieved using a large-area, high gain, low-noise silicon avalanche photodiode (APD) as the photodetector cum frequency mixer-demodulator. We demonstrate that heterodyne detection by gain modulation of APD can be used to increase the signal-to-noise ratio, detection sensitivity and bandwidth for the hybrid receiver system.

  2. Automotive Radar Sensors in Silicon Technologies

    CERN Document Server

    Jain, Vipul

    2013-01-01

    This book presents architectures and design techniques for mm-wave automotive radar transceivers. Several fully-integrated transceivers and receivers operating at 22-29 GHz and 77-81 GHz are demonstrated in both CMOS and SiGe BiCMOS technologies. Excellent performance is achieved indicating the suitability of silicon technologies for automotive radar sensors.  This book bridges an existing gap between information available on dependable system/architecture design and circuit design.  It provides the background of the field and detailed description of recent research and development of silicon-based radar sensors.  System-level requirements and circuit topologies for radar transceivers are described in detail. Holistic approaches towards designing radar sensors are validated with several examples of highly-integrated radar ICs in silicon technologies. Circuit techniques to design millimeter-wave circuits in silicon technologies are discussed in depth.  Describes concepts and fundamentals of automotive rada...

  3. Lidar: range-resolved optical remote sensing of the atmosphere

    National Research Council Canada - National Science Library

    Weitkamp, Claus; Walther, Herbert

    2005-01-01

    "Written by leading experts in optical radar, or lidar, this book brings all the recent practices up-to-date and covers a multitude of applications, from atmospheric sciences to environmental protection...

  4. Signal Processing for Radar with Array Antennas and for Radar with Micro-Doppler Measurements

    OpenAIRE

    Björklund, Svante

    2017-01-01

    Radar (RAdio Detection And Ranging) uses radio waves to detect the presence of a target and measure its position and other properties. This sensor has found many civilian and military applications due to advantages such as possible large surveillance areas and operation day and night and in all weather. The contributions of this thesis are within applied signal processing for radar in two somewhat separate research areas: 1) radar with array antennas and 2) radar with micro-Doppler measuremen...

  5. Bistatic Forward Scattering Radar Detection and Imaging

    OpenAIRE

    2016-01-01

    Forward Scattering Radar (FSR) is a special type of bistatic radar that can implement image detection, imaging, and identification using the forward scattering signals provided by the moving targets that cross the baseline between the transmitter and receiver. Because the forward scattering effect has a vital significance in increasing the targets’ Radar Cross Section (RCS), FSR is quite advantageous for use in counter stealth detection. This paper first introduces the front line technology u...

  6. Artifacts in Radar Imaging of Moving Targets

    Science.gov (United States)

    2012-09-01

    leads to the wrong object localization and defocusing on the image. For SAR , a moving target’s physical location varies throughout the imaging...Imaging, Synthetic Aperture Radar, Bistatic Radar, Multistatic Radar, Moving Targets, Backprojection 15. NUMBER OF PAGES 133 16. PRICE CODE 17...broadening and range errors were introduced by target motion. This leads to incorrect object localization and defocusing on the image. For SAR , a

  7. Fully Adaptive Radar Modeling and Simulation Development

    Science.gov (United States)

    2017-04-01

    Organization (NATO) Sensors Electronics Technology (SET)-227 Panel on Cognitive Radar. The FAR M&S architecture developed in Phase I allows for...Air Force’s previously developed radar M&S tools. This report is organized as follows. In Chapter 3, we provide an overview of the FAR framework...AFRL-RY-WP-TR-2017-0074 FULLY ADAPTIVE RADAR MODELING AND SIMULATION DEVELOPMENT Kristine L. Bell and Anthony Kellems Metron, Inc

  8. Intra-Pulse Radar-Embedded Communications

    Science.gov (United States)

    2011-08-26

    Blunt, E. Mokole, R. Schneible, and M. Wicks, SciTech Publishing, 2010. 3. S.D. Blunt, T. Higgins, A.K. Shackelford , and K. Gerlach, “Multistatic... Shackelford , “Multi-dimensional Adaptive Processing for Angle-Dependent Radar Waveforms,” in preparation for IET Radar, Sonar & Navigation. 8. H... Shackelford , “Time-Range Adaptive Processing for Pulse Agile Radar,” 5 th International Waveform Diversity & Design Conference, Niagara Falls, Canada

  9. Preliminary results of noise radar experiments

    Science.gov (United States)

    Malanowski, Mateusz; Contartese, Clara; Maslikowski, Lukasz; Baczyk, Marcin; Kulpa, Krzysztof

    2009-06-01

    The paper describes the first results of noise radar experiments carried out at Warsaw University of Technology. The radar system was built with Commercial Off-The-Shelf (COTS) components: log-periodic antennas, an arbitrary waveform generator and a two-channel spectrum analyzer. The radar operated in the continuous-wave mode, and the aim was to detect moving targets in the received signal. The paper shows the system setup as well as the numerical results obtained from the recorded signals.

  10. Ground Penetrating Radar: Ultra-wideband radars for improvised explosive devices and landmine detection

    NARCIS (Netherlands)

    Yarovoy, A.

    2008-01-01

    For last two decades Ultra-Wideband Ground Penetrating Radars seemed to be a useful tool for detection and classification of landmines and improvised explosive devices (IEDs). However limitations of radar technology considerably limited operational use of these radars. Recent research at TU Delft so

  11. Ground Penetrating Radar: Ultra-wideband radars for improvised explosive devices and landmine detection

    OpenAIRE

    Yarovoy, A.

    2008-01-01

    For last two decades Ultra-Wideband Ground Penetrating Radars seemed to be a useful tool for detection and classification of landmines and improvised explosive devices (IEDs). However limitations of radar technology considerably limited operational use of these radars. Recent research at TU Delft solves the bottleneck problems.

  12. Radar hydrology principles, models, and applications

    CERN Document Server

    Hong, Yang

    2014-01-01

    ""This is the first book on radar hydrology written by hydrologists. Whereas the excellent knowledge of radar technology by the authors permits an adequate coverage of the principles of rainfall rate estimation by radar, their hydrological background allows them to provide a unique message on the benefits (and on the remaining challenges) in exploiting radar techniques in hydrology. … In a clear and concise manner, the book combines topics from different scientific disciplines into a unified approach aiming to guide the reader through the requirements, strengths, and pitfalls of the applica

  13. Search Radar ECM/EA Simulator

    Data.gov (United States)

    Federal Laboratory Consortium — FUNCTION: Tests the effectiveness of electronic countermeasures/electronic attack (ECM/EA) equipment and techniques for jamming airborne search and targeting radars....

  14. Future of phased array radar systems

    Science.gov (United States)

    Bassyouni, Ahmed

    2011-12-01

    This paper spots the light on the future progress of phased array radar systems, presenting two innovative examples on the directions of development. The first example starts with the classic radar range equation to develop the topology of what is called a "Mobile Adaptive Digital Array Radar" (MADAR) system. The second example discusses the possibility to achieve what is called "Entangled Photonic Radar" (EPR) system. The EPR quantum range equation is derived and compared to the classic one to compare the performance. Block diagrams and analysis for both proposed systems are presented.

  15. Radar reflection off extensive air showers

    Directory of Open Access Journals (Sweden)

    Werner F.

    2013-06-01

    Full Text Available We investigate the possibility of detecting extensive air showers by the radar technique. Considering a bistatic radar system and different shower geometries, we simulate reflection of radio waves off the static plasma produced by the shower in the air. Using the Thomson cross-section for radio wave reflection, we obtain the time evolution of the signal received by the antennas. The frequency upshift of the radar echo and the power received are studied to verify the feasibility of the radar detection technique.

  16. Recent advances in geologic mapping by radar

    Science.gov (United States)

    Farr, T. G.

    1984-01-01

    Quantitative techniques are available which allow the analysis of SAR images for the derivation of geological surface and process data. In conjunction with calibrated radar sensors operating at several incidence angles, wavelengths, and polarizations, the compilation of multiparameter radar signatures of lithological and geomorphic units can accordingly proceed for geological mapping in unknown areas. While radar image tone can be used in arid zones to derive surface micromorphology, heavily vegetated tropical regions require the analysis of radar image texture by means of Fourier techniques which decompose the image into bandpasses that represent different scales of texture.

  17. Arecibo radar imagery of Mars: II. Chryse-Xanthe, polar caps, and other regions

    Science.gov (United States)

    Harmon, John K.; Nolan, Michael C.

    2017-01-01

    other ice processes in the dichotomy boundary region. The first delay-Doppler images of the radar-bright features from the north and south polar icecaps are presented. Both poles show the circular polarization inversion and high reflectivity characteristic of coherent volume backscatter from relatively clean ice. The south polar feature is primarily backscatter from the residual CO2 icecap (with a lesser contribution from the polar layered deposits), whose finite optical depth probably accounts for the feature's strong S/X-band wavelength dependence. Conversely, the north polar radar feature appears to be mostly backscatter from the H2O-ice-rich polar layered deposits rather than from the thin residual H2O cap. The north polar region shows additional radar-bright features from Korolev Crater and a few other outlying circumpolar ice deposits.

  18. Radar network communication through sensing of frequency hopping

    Science.gov (United States)

    Dowla, Farid; Nekoogar, Faranak

    2013-05-28

    In one embodiment, a radar communication system includes a plurality of radars having a communication range and being capable of operating at a sensing frequency and a reporting frequency, wherein the reporting frequency is different than the sensing frequency, each radar is adapted for operating at the sensing frequency until an event is detected, each radar in the plurality of radars has an identification/location frequency for reporting information different from the sensing frequency, a first radar of the radars which senses the event sends a reporting frequency corresponding to its identification/location frequency when the event is detected, and all other radars in the plurality of radars switch their reporting frequencies to match the reporting frequency of the first radar upon detecting the reporting frequency switch of a radar within the communication range. In another embodiment, a method is presented for communicating information in a radar system.

  19. The NASA radar entomology program at Wallops Flight Center

    Science.gov (United States)

    Vaughn, C. R.

    1979-01-01

    NASA contribution to radar entomology is presented. Wallops Flight Center is described in terms of its radar systems. Radar tracking of birds and insects was recorded from helicopters for airspeed and vertical speed.

  20. Pocket radar guide key facts, equations, and data

    CERN Document Server

    Curry, G Richard

    2010-01-01

    ThePocket Radar Guideis a concise collection of key radar facts and important radar data that provides you with necessary radar information when you are away from your office or references. It includes statements and comments on radar design, operation, and performance; equations describing the characteristics and performance of radar systems and their components; and tables with data on radar characteristics and key performance issues.It is intended to supplement other radar information sources by providing a pocket companion to refresh memory and provide details whenever you need them such a

  1. Array-Based Ultrawideband through-Wall Radar: Prediction and Assessment of Real Radar Abilities

    Directory of Open Access Journals (Sweden)

    Nadia Maaref

    2013-01-01

    Full Text Available This paper deals with a new through-the-wall (TTW radar demonstrator for the detection and the localisation of people in a room (in a noncooperative way with the radar situated outside but in the vicinity of the first wall. After modelling the propagation through various walls and quantifying the backscattering by the human body, an analysis of the technical considerations which aims at defining the radar design is presented. Finally, an ultrawideband (UWB frequency modulated continuous wave (FMCW radar is proposed, designed, and implemented. Some representative trials show that this radar is able to localise and track moving people behind a wall in real time.

  2. Agile beam laser radar using computational imaging for robotic perception

    Science.gov (United States)

    Powers, Michael A.; Stann, Barry L.; Giza, Mark M.

    2015-05-01

    This paper introduces a new concept that applies computational imaging techniques to laser radar for robotic perception. We observe that nearly all contemporary laser radars for robotic (i.e., autonomous) applications use pixel basis scanning where there is a one-to-one correspondence between world coordinates and the measurements directly produced by the instrument. In such systems this is accomplished through beam scanning and/or the imaging properties of focal-plane optics. While these pixel-basis measurements yield point clouds suitable for straightforward human interpretation, the purpose of robotic perception is the extraction of meaningful features from a scene, making human interpretability and its attendant constraints mostly unnecessary. The imposing size, weight, power and cost of contemporary systems is problematic, and relief from factors that increase these metrics is important to the practicality of robotic systems. We present a system concept free from pixel basis sampling constraints that promotes efficient and adaptable sensing modes. The cornerstone of our approach is agile and arbitrary beam formation that, when combined with a generalized mathematical framework for imaging, is suited to the particular challenges and opportunities of robotic perception systems. Our hardware concept looks toward future systems with optical device technology closely resembling modern electronically-scanned-array radar that may be years away from practicality. We present the design concept and results from a prototype system constructed and tested in a laboratory environment using a combination of developed hardware and surrogate devices for beam formation. The technological status and prognosis for key components in the system is discussed.

  3. Optics/Optical Diagnostics Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — The Optics/Optical Diagnostics Laboratory supports graduate instruction in optics, optical and laser diagnostics and electro-optics. The optics laboratory provides...

  4. Radar interferometry persistent scatterer technique

    CERN Document Server

    Kampes, Bert M

    2006-01-01

    Only book on Permanent Scatterer technique of radar interferometryExplains the Permanent Scatterer technique in detail, possible pitfalls, and details a newly developed stochastic model and estimator algorithm to cope with possible problems for the application of the PS techniqueThe use of Permanent Scatterer allows very precise measurements of the displacement of hundreds of points per square kilometerDescribes the only technique currently able to perform displacement measurements in the past, utilizing the ERS satellite data archive using data acquired from 1992-prese

  5. Imaging radar polarimetry - A review

    Science.gov (United States)

    Zebker, Howard A.; Van Zyl, Jakob J.

    1991-01-01

    The authors present a tutorial review of the broad sweep of topics relating to imaging radar polarimetry, ranging from mathematical foundations to hardware and from implementation approaches to signal processing and calibration. The authors examine current developments in sensor technology and implementation for recording polarimetric measurements, and describe techniques and areas of application for this form of remotely sensed data. Those aspects of ground signal processing and calibration peculiar to the polarimetric signals are addressed. Several of the currently operating instruments and some of the implementations planned for future use are discussed.

  6. Multiple frequency atmospheric radar techniques

    Science.gov (United States)

    Stitt, Gary Richard

    The use of multiple frequency coding to improve the vertical resolution of pulsed-Doppler very high frequency atmospheric radars, especially with regards to the two-frequency techniques known as frequency domain interferometry (FDI), is presented. This technique consists of transmitting alternate pulses on two distinct carrier frequencies. The two resulting time series are used to evaluate the normalized cross-correlation function, whose magnitude and phase are related to the thickness and position of a scattering layer. These same time series are also used to evaluate cross-spectra, which yield magnitude and phase values for each Doppler frequency component of the return signal.

  7. Radar Methods in Urban Environments

    Science.gov (United States)

    2016-10-26

    AFRL-AFOSR-VA-TR-2016-0344 Radar Methods in Urban Environments Arye Nehorai WASHINGTON UNIVERSITY THE Final Report 10/26/2016 DISTRIBUTION A...Methods in Urban Environments 5a.  CONTRACT NUMBER 5b.  GRANT NUMBER FA9550-11-1-0210 5c.  PROGRAM ELEMENT NUMBER 61102F 6. AUTHOR(S) Arye Nehorai 5d...Methods in Urban Environments Grant No. FA9550-11-1-0210 Final Report August 2011 – July 2016 Arye Nehorai Department of Electrical and Systems

  8. Oil Slick Characterization Using Synthetic Aperture Radar

    Science.gov (United States)

    Jones, C. E.; Breivik, O.; Brekke, C.; Skrunes, S.; Holt, B.

    2015-12-01

    Oil spills are a hazard worldwide with potential of causing high impact disasters, and require an active oil spill response capability to protect personnel, the ecosystem, and the energy supply. As the amount of oil in traditionally accessible reserves decline, there will be increasing oil extraction from the Arctic and deep-water wells, both new sources with high risk and high cost for monitoring and response. Although radar has long been used for mapping the spatial extent of oil slicks, it is only since the Deepwater Horizon spill that synthetic aperture radar (SAR) has been shown capable of characterizing oil properties within a slick, and therefore useful for directing response to the recoverable thicker slicks or emulsions. Here we discuss a 2015 Norwegian oil-on-water spill experiment in which emulsions of known quantity and water-to-oil ratio along with a look-alike slick of plant oil were released in the North Sea and imaged with polarimetric SAR (PolSAR) by NASA's UAVSAR instrument for several hours following release. During the experiment, extensive in situ measurements were made from ship or aircraft with meteorological instruments, released drift buoys, and optical/IR imagers. The experiment was designed to provide validation data for development of a physical model relating polarization-dependent electromagnetic scattering to the dielectric properties of oil mixed with ocean water, which is the basis for oil characterization with SAR. Data were acquired with X-, C-, and L-band satellite-based SARs to enable multi-frequency comparison of characterization capabilities. In addition, the data are used to develop methods to differentiate mineral slicks from biogenic look-alikes, and to better understand slick weathering and dispersion. The results will provide a basis for modeling oil-in-ice spills, currently a high priority for nations involved in Arctic oil exploration. Here we discuss the Norwegian experiment, the validation data, and the results of

  9. Development of radar cross section analysis system of naval ships

    Directory of Open Access Journals (Sweden)

    Kookhyun Kim

    2012-03-01

    Full Text Available A software system for a complex object scattering analysis, named SYSCOS, has been developed for a systematic radar cross section (RCS analysis and reduction design. The system is based on the high frequency analysis methods of physical optics, geometrical optics, and physical theory of diffraction, which are suitable for RCS analysis of electromagnetically large and complex targets as like naval ships. In addition, a direct scattering center analysis function has been included, which gives relatively simple and intuitive way to discriminate problem areas in design stage when comparing with conventional image-based approaches. In this paper, the theoretical background and the organization of the SYSCOS system are presented. To verify its accuracy and to demonstrate its applicability, numerical analyses for a square plate, a sphere and a cylinder, a weapon system and a virtual naval ship have been carried out, of which results have been compared with analytic solutions and those obtained by the other existing software.

  10. Incidence angle normalization of radar backscatter data

    Science.gov (United States)

    NASA’s Soil Moisture Passive Active (SMAP) satellite (~2014) will include a radar system that will provide L-band multi-polarization backscatter at a constant incidence angle of 40º. During the pre-launch phase of the project there is a need for observations that will support the radar-based soil mo...

  11. Wind energy applications of synthetic aperture radar

    DEFF Research Database (Denmark)

    Badger, Merete

    Synthetic aperture radars (SAR), mounted on satellites or aircraft, have proven useful for ocean wind mapping. Wind speeds at the height 10 m may be retrieved from measurements of radar backscatter using empirical model functions. The resulting windfields are valuable in offshore wind energy...

  12. Kharkiv Meteor Radar System (the XX Age)

    Science.gov (United States)

    Kolomiyets, S. V.

    2012-09-01

    Kharkiv meteor radar research are of historic value (Kolomiyets and Sidorov 2007). Kharkiv radar observations of meteors proved internationally as the best in the world, it was noted at the IAU General Assembly in 1958. In the 1970s Kharkiv meteor automated radar system (MARS) was recommended at the international level as a successful prototype for wide distribution. Until now, this radar system is one of the most sensitive instruments of meteor radars in the world for astronomical observations. In 2004 Kharkiv meteor radar system is included in the list of objects which compose the national property of Ukraine. Kharkiv meteor radar system has acquired the status of the important historical astronomical instrument in world history. Meteor Centre for researching meteors in Kharkiv is a analogue of the observatory and performs the same functions of a generator and a battery of special knowledge and skills (the world-famous studio). Kharkiv and the location of the instrument were brand points on the globe, as the place where the world-class meteor radar studies were carried out. They are inscribed in the history of meteor astronomy, in large letters and should be immortalized on a world-wide level.

  13. Shuttle Imaging Radar Survey Mission C

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — Abstract: Spaceborne Imaging Radar-C (SIR-C) was part of an imaging radar system that was flown on board two Space Shuttle flights (9 - 20 April, 1994 and 30...

  14. Watchdog for ARM Radar Network Operations

    Energy Technology Data Exchange (ETDEWEB)

    2016-07-28

    WARNO is a software system designed to monitor the radars in the ARM Radar Network. It allows real time monitoring and tracking of instrument state and condition. It provides a web portal on the front end to interact with users, a REST API webpoint for interactions with third party systems, and an internal distributed architecture to allow it to be deployed at multiple sites.

  15. VAMPIRA - Radar and Infrared Propagation Synergism Trial

    NARCIS (Netherlands)

    Heemskerk, H.J.M.

    2005-01-01

    In a coastal environment simultaneous exploitation of radar and infrared sensors and multisensor fusion can overcome the difficulties imposed by the atmospheric conditions with respect to target detection/recognition/classification by the individual sensors. To investigate the so-called radar and

  16. Shuttle Imaging Radar Survey Mission C

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — Spaceborne Imaging Radar-C (SIR-C) was part of an imaging radar system that was flown on board two Space Shuttle flights (9 - 20 April, 1994 and 30 September - 11...

  17. High-precision positioning of radar scatterers

    NARCIS (Netherlands)

    Dheenathayalan, P.; Small, D.; Schubert, A.; Hanssen, R.F.

    2016-01-01

    Remote sensing radar satellites cover wide areas and provide spatially dense measurements, with millions of scatterers. Knowledge of the precise position of each radar scatterer is essential to identify the corresponding object and interpret the estimated deformation. The absolute position accuracy

  18. Classification of Agricultural Crops in Radar Images

    NARCIS (Netherlands)

    Hoogeboom, P.

    1983-01-01

    For the past few years an accurate X-band SLAR system with digital recording has been available in The Netherlands. The images of this system are corrected to indicate radar backscatter coefficients (gamma) instead of arbitrary greytones. In 1980 a radar measurement campaign was organized in the

  19. Ultra-wideband radar sensors and networks

    Science.gov (United States)

    Leach, Jr., Richard R; Nekoogar, Faranak; Haugen, Peter C

    2013-08-06

    Ultra wideband radar motion sensors strategically placed in an area of interest communicate with a wireless ad hoc network to provide remote area surveillance. Swept range impulse radar and a heart and respiration monitor combined with the motion sensor further improves discrimination.

  20. Convex model-based synthetic aperture radar processing

    Science.gov (United States)

    Knight, Chad P.

    The use of radar often conjures up images of small blobs on a screen. But current synthetic aperture radar (SAR) systems are able to generate near-optical quality images with amazing benefits compared to optical sensors. These SAR sensors work in all weather conditions, day or night, and provide many advanced capabilities to detect and identify targets of interest. These amazing abilities have made SAR sensors a work-horse in remote sensing, and military applications. SAR sensors are ranging instruments that operate in a 3D environment, but unfortunately the results and interpretation of SAR images have traditionally been done in 2D. Three-dimensional SAR images could provide improved target detection and identification along with improved scene interpretability. As technology has increased, particularly regarding our ability to solve difficult optimization problems, the 3D SAR reconstruction problem has gathered more interest. This dissertation provides the SAR and mathematical background required to pose a SAR 3D reconstruction problem. The problem is posed in a way that allows prior knowledge about the target of interest to be integrated into the optimization problem when known. The developed model is demonstrated on simulated data initially in order to illustrate critical concepts in the development. Then once comprehension is achieved the processing is applied to actual SAR data. The 3D results are contrasted against the current "gold-standard." The results are shown as 3D images demonstrating the improvement regarding scene interpretability that this approach provides.

  1. Radar interferometer measurements of space debris using the Evpatoria RT-70 transmitter

    Science.gov (United States)

    Molotov, I.; Konovalenko, A.; Agapov, V.; Sochilina, A.; Lipatov, B.; Gorshenkov, Yu.; Molotov, E.; Tuccari, G.; Buttaccio, S.; Liu, X.; Zhang, J.; Hong, X.; Huang, X.; Kus, A.; Borkowski, K.; Sika, Z.; Abrosimov, V.; Tsyukh, A.; Samodurov, V.; Falkovich, I.; Litvinenko, L.; Stepaniants, V.; Dementiev, A.; Antipenko, A.; Snegirev, S.; Nechaeva, M.; Volvach, A.; Saurin, V.; Pushkarev, A.; Deviatkin, A.; Guseva, I.; Sukhov, P.

    2004-01-01

    The ability of the Evpatoria RT-70 radar complex to perform research on space debris was investigated in four trial experiments during 2001-2003. The echo-signals of 25 objects at geostationary, highly elliptical and medium-altitude orbits were recorded on magnetic tapes at radio telescopes in Russia, Italy, China and Poland. The multi-antenna system configuration gives potential to supplement the classic radar data with precise angular observations using the technique of Very Long Baseline Interferometry. The first stage of such processing was fulfilled by the correlator in N. Novgorod, Russia. The cross-correlation of transmitted and received signals was obtained for the 11 objects on the Evpatoria-Bear Lakes, Evpatoria-Urumqi and Evpatoria-Noto baselines. This activity also promoted developing the optical observations of geostationary objects, conducted for the improvement of the radar target ephemerides.

  2. Fractal characteristics for binary noise radar waveform

    Science.gov (United States)

    Li, Bing C.

    2016-05-01

    Noise radars have many advantages over conventional radars and receive great attentions recently. The performance of a noise radar is determined by its waveforms. Investigating characteristics of noise radar waveforms has significant value for evaluating noise radar performance. In this paper, we use binomial distribution theory to analyze general characteristics of binary phase coded (BPC) noise waveforms. Focusing on aperiodic autocorrelation function, we demonstrate that the probability distributions of sidelobes for a BPC noise waveform depend on the distances of these sidelobes to the mainlobe. The closer a sidelobe to the mainlobe, the higher the probability for this sidelobe to be a maximum sidelobe. We also develop Monte Carlo framework to explore the characteristics that are difficult to investigate analytically. Through Monte Carlo experiments, we reveal the Fractal relationship between the code length and the maximum sidelobe value for BPC waveforms, and propose using fractal dimension to measure noise waveform performance.

  3. Magneto-Radar Hidden Metal Detector

    Energy Technology Data Exchange (ETDEWEB)

    McEwan, Thomas E. (Las Vegas, NV)

    2005-07-05

    A varying magnetic field excites slight vibrations in an object and a radar sensor detects the vibrations at a harmonic of the excitation frequency. The synergy of the magnetic excitation and radar detection provides increased detection range compared to conventional magnetic metal detectors. The radar rejects background clutter by responding only to reflecting objects that are vibrating at a harmonic excitation field, thereby significantly improving detection reliability. As an exemplary arrangement, an ultra-wideband micropower impulse radar (MIR) is capable of being employed to provide superior materials penetration while providing range information. The magneto-radar may be applied to pre-screening magnetic resonance imaging (MRI) patients, landmine detection and finding hidden treasures.

  4. Weather radar rainfall data in urban hydrology

    DEFF Research Database (Denmark)

    Thorndahl, Søren; Einfalt, Thomas; Willems, Patrick

    2017-01-01

    Application of weather radar data in urban hydrological applications has evolved significantly during the past decade as an alternative to traditional rainfall observations with rain gauges. Advances in radar hardware, data processing, numerical models, and emerging fields within urban hydrology...... necessitate an updated review of the state of the art in such radar rainfall data and applications. Three key areas with significant advances over the past decade have been identified: (1) temporal and spatial resolution of rainfall data required for different types of hydrological applications, (2) rainfall...... estimation, radar data adjustment and data quality, and (3) nowcasting of radar rainfall and real-time applications. Based on these three fields of research, the paper provides recommendations based on an updated overview of shortcomings, gains, and novel developments in relation to urban hydrological...

  5. Remote sensing with laser spectrum radar

    Science.gov (United States)

    Wang, Tianhe; Zhou, Tao; Jia, Xiaodong

    2016-10-01

    The unmanned airborne (UAV) laser spectrum radar has played a leading role in remote sensing because the transmitter and the receiver are together at laser spectrum radar. The advantages of the integrated transceiver laser spectrum radar is that it can be used in the oil and gas pipeline leak detection patrol line which needs the non-contact reflective detection. The UAV laser spectrum radar can patrol the line and specially detect the swept the area are now in no man's land because most of the oil and gas pipelines are in no man's land. It can save labor costs compared to the manned aircraft and ensure the safety of the pilots. The UAV laser spectrum radar can be also applied in the post disaster relief which detects the gas composition before the firefighters entering the scene of the rescue.

  6. Numerical simulation of imaging laser radar system

    Science.gov (United States)

    Han, Shaokun; Lu, Bo; Jiang, Ming; Liu, Xunliang

    2008-03-01

    Rational and effective design of imaging laser radar systems is the key of imaging laser radar system research. Design must fully consider the interrelationship between various parameters. According to the parameters, choose suitable laser, detector and other components. To use of mathematical modeling and computer simulation is an effective imaging laser radar system design methods. This paper based on the distance equation, using the detection statistical methods, from the laser radar range coverage, detection probability, false-alarm rate, SNR to build the laser radar system mathematical models. In the process of setting up the mathematical models to fully consider the laser, atmosphere, detector and other factors on the performance that is to make the models be able to respond accurately the real situation. Based on this using C# and Matlab designed a simulation software.

  7. Space Radar Image of Manaus region of Brazil

    Science.gov (United States)

    1994-01-01

    These L-band images of the Manaus region of Brazil were acquired by the Spaceborne Imaging Radar-C and X-band Synthetic Aperture Radar (SIR-C/X-SAR) aboard the space shuttle Endeavour. The left image was acquired on April 12, 1994, and the middle image was acquired on October 3, 1994. The area shown is approximately 8 kilometers by 40 kilometers (5 miles by 25 miles). The two large rivers in this image, the Rio Negro (top) and the Rio Solimoes (bottom), combine at Manaus (west of the image) to form the Amazon River. The image is centered at about 3 degrees south latitude and 61 degrees west longitude. North is toward the top left of the images. The differences in brightness between the images reflect changes in the scattering of the radar channel. In this case, the changes are indicative of flooding. A flooded forest has a higher backscatter at L-band (horizontally transmitted and received) than an unflooded river. The extent of the flooding is much greater in the April image than in the October image, and corresponds to the annual, 10-meter (33-foot) rise and fall of the Amazon River. A third image at right shows the change in the April and October images and was created by determining which areas had significant decreases in the intensity of radar returns. These areas, which appear blue on the third image at right, show the dramatic decrease in the extent of flooded forest, as the level of the Amazon River falls. The flooded forest is a vital habitat for fish and floating meadows are an important source of atmospheric methane. This demonstrates the capability of SIR-C/X-SAR to study important environmental changes that are impossible to see with optical sensors over regions such as the Amazon, where frequent cloud cover and dense forest canopies obscure monitoring of floods. Field studies by boat, on foot and in low-flying aircraft by the University of California at Santa Barbara, in collaboration with Brazil's Instituto Nacional de Pesguisas Estaciais, during

  8. Radar-eddy current GPR

    Directory of Open Access Journals (Sweden)

    A. O. Abramovych

    2014-06-01

    Full Text Available Introduction. At present there are many electrical schematic metal detectors (the most common kind of ground penetrating radar, which are differ in purpose. Each scheme has its own advantages and disadvantages compared to other schemes. Designing metal detector problem of optimal selection of functional units most schemes can only work with a narrow range of special purpose units. Functional units used in circuits can be replaced by better ones, but specialization schemes do not provide such a possibility. Description of problem. Author has created a "complex for research of functional units of metal detectors" that is the universal system that meets the task. With this set of studies conducted on the practical implementation of radar-eddy current method of distinguishing non-ferrous metals (gold, copper, etc. is based. Description of method. Mathematical tools using have to be treated as a signal metal detector to distinguish metals: gold, copper and others. Conclusions. Processing of partial pulses may have information about beforehand signal loss during propagation in heterogeneous media with lossy nonuniform distribution parameters. Using eddy currents To calculate the value of the input voltage depending on the conductivity of the metal in the receiving antenna.Combining two different methods for processing the received signal theoretically it could be proved that with high probability can distinguish non-ferrous metals - gold, copper etc.

  9. Radar fall detectors: a comparison

    Science.gov (United States)

    Erol, Baris; Amin, Moeness; Ahmad, Fauzia; Boashash, Boualem

    2016-05-01

    Falls are a major cause of accidents in elderly people. Even simple falls can lead to severe injuries, and sometimes result in death. Doppler fall detection has drawn much attention in recent years. Micro-Doppler signatures play an important role for the Doppler-based radar systems. Numerous studies have demonstrated the offerings of micro-Doppler characteristics for fall detection. In this respect, a plethora of micro-Doppler signature features have been proposed, including those stemming from speech recognition and wavelet decomposition. In this work, we consider four different sets of features for fall detection. These can be categorized as spectrogram based features, wavelet based features, mel-frequency cepstrum coefficients, and power burst curve features. Support vector machine is employed as the classifier. Performance of the respective fall detectors is investigated using real data obtained with the same radar operating resources and under identical sensing conditions. For the considered data, the spectrogram based feature set is shown to provide superior fall detection performance.

  10. Realistic simulations of tsunami detection by High-Frequency Radar in British Columbia, Canada

    Science.gov (United States)

    Grilli, Stéphan; Shelby, Michael; Grilli, Annette; Lado Insua, Tania; Guérin, Charles-Antoine

    2016-04-01

    A promising technique for long-range detection of tsunamis is the use of shore-based High Frequency (HF) surface wave radars, also simply referred to as oceanographic radars. These over-the-horizon radars are routinely used for real-time monitoring of ocean surface currents up to a 70-80 km range, based on the Doppler shift the latter cause in ocean waves at the radar Bragg frequency. Quite recently there has been convincing numerical and experimental evidence that oceanographic radars can also be used to detect tsunami-induced surface currents. However, these need to be at least 0.15-0.20 m/s to be detectable, when considering environmental noise and background currents (from tide and mesoscale circulation). This limits the actual detection of tsunami currents to the near range, that is essentially to the continental shelf over which tsunami currents become strong enough; in many cases this does not leave enough time to issue an efficient warning, unless there is a wide shelf. In recent work, some of the authors have proposed a detection algorithm that does not have this limitation and can detect an approaching tsunami in deeper water, beyond the continental shelf. This algorithm does not require "inverting" currents, but instead is based on spatial correlations of the raw signals recorded at two distant radar cells along the same wave ray, shifted in time by the tsunami propagation time along the ray. An elevated correlation would indicate the presence of a tsunami. We apply this algorithm to a realistic tsunami case study conducted, using a state-of-the-art long wave model, for sources (both seismic and landslide) and bathymetry off of Vancouver Island, BC. The propagation time between different radar cells is calculated with a Geometrical Optics approach using the Eikonal equation. This requires first determining wave rays' intersections with radar cells and computing a connectivity matrix between the latter. A model simulating the radar backscattered signal in

  11. Ku-Band radar penetration into Snow over Arctic Sea Ice

    DEFF Research Database (Denmark)

    Hendricks, Stefan; Stenseng, Lars; Helm, Veit

    Sea ice freeboard measurements are of great interest for basin-scale ice mass balance monitoring. Typically, laser- and radar-altimeters are used for freeboard retrieval in operational systems such as aircrafts and satellites. For laser beams it can be assumed that the dominant reflector is the s......Sea ice freeboard measurements are of great interest for basin-scale ice mass balance monitoring. Typically, laser- and radar-altimeters are used for freeboard retrieval in operational systems such as aircrafts and satellites. For laser beams it can be assumed that the dominant reflector...... is the snow/air interface, whereas radar waves interact with the variable physical properties of the snow cover on the Arctic sea ice. In addition, radar elevation measurements may vary for different retracker algorithms, which determine the track point of the scattered echo power distribution. Since accurate...... knowledge of the reflection horizon is critical for sea ice thickness retrieval, validation data is necessary to investigate the penetration of radar waves into the snow for the upcoming CryoSat-2 mission. Furthermore, the combination of both optical and RF wavelengths might be used to derive snow thickness...

  12. On the effect of surface roughness and frequency on the planetary radar echo

    Science.gov (United States)

    Virkki, Anne

    2016-10-01

    Planetary radar is a strong tool for revealing surface properties of near-Earth asteroids, such as the geometric composition, or surface roughness, with implications on the chemical composition. For some asteroids and comets visited with spacecrafts, local variations of the size distribution of surface particles have been observed (Michikami et al., Earth Planets Space 60, 2008). The variations can be observed using radar through variations of circular-polarization ratio (Virkki et al. In Asteroids, Comets, Meteors 2014, 2014).We model radar scattering by planetary surfaces using an algorithm of geometric optics with Fresnelian reflections and refractions as well as diffuse scattering (Muinonen et al., JQSRT 110, 2009). Previously, we have shown the effect of various surface properties, such as the material, geometry, and size of the scatterers, e.g., wavelength-scale boulders on the asteroid surface, on the observed radar albedo and circular-polarization ratio when a power-law (r-3) size distribution of irregular particles is used (Virkki and Muinonen, Icarus 269, 2016). In this study, we show how different size distributions affect the radar albedo and circular-polarization ratio. Also, we discuss the effect that the choice of the observation frequency (2380 or 8560 MHz) may have on the echo. As materials, we compare different types of rock and ice.

  13. Radar

    DEFF Research Database (Denmark)

    Nielsen, Tom

    2009-01-01

    Bidrag til arkitektens opgørelse (baseret på en række forskellige indlæg) over hvor dansk arkitektur står, med korte bud på spørgsmålene: Kan man ud over stedsanknytningen tale om en særlig dansk arkitektur?, Hvad er dansk arkitekturs største kvalitet, vores vigtigste force? og Hvad er dansk arki...

  14. Composite technology in radar equipment. Dopler Meteo radar reflector device

    Directory of Open Access Journals (Sweden)

    A. V. Shumov

    2014-01-01

    Full Text Available The article is devoted features of the application composite materials in radar technology for example adjustment of the development technology of the reflector antenna device DMRL-S - radar for monitoring meteorological conditions.Russian and foreign analogues DMRL-S are made of aluminum, which no longer meets modern requirements for strength and weight. Also aluminum reflectors are not temperature stable. Composite materials are characterized by higher values of specific characteristics: temporary resistance, endurance limit, stiffness, elastic modulus, and less prone to cracking. The use of such materials improves the strength, rigidity and durability.For the manufacture of the DMRL-C reflector used composite materials based on epoxy resins reinforced with fiberglass (both unidirectional and woven. To increase the rigidity and weight reflector is made in the form of three-layer sandwich fiberglass panels with honeycomb core variable height. Design work was carried out in a CAD Siemens NX8.0 / Unigraphics, through which was established mathematical model layered reflector, as well as all accessories used in the manufacture. With the program NX Nastran was held strength calculation and analysis of stiffness on the finite element method.After the manufacture of the product, we measured the standard deviation of the working surface of the reflector from the theoretical surface using a three-dimensional laser scanner. Measurements were made at different angular positions of the reflector, and when loading. It is shown that the maximum strain in the operating modes of operation across the surface of the product does not exceed 4%, which will provide the most accurate operation of the product in any position of the antenna system.As a result of this work reflector design was developed, created and verified by experimental data calculation model. Reflector antenna device of the DMRL-S was manufactured and tested. The reflector was made of reinforced

  15. Decision Tool for optimal deployment of radar systems

    NARCIS (Netherlands)

    Vogel, M.H.

    1995-01-01

    A Decision Tool for air defence is presented. This Decision Tool, when provided with information about the radar, the environment, and the expected class of targets, informs the radar operator about detection probabilities. This assists the radar operator to select the optimum radar parameters. n

  16. The use of radar for bathymetry in shallow seas

    NARCIS (Netherlands)

    Greidanus, H.

    1997-01-01

    The bottom topography in shallow seas can be observed by air- and space borne radar. The paper reviews the radar imaging mechanism, and discusses the possibilities and limitations for practical use of radar in bathymetric applications, including the types of radar instruments available for this

  17. Real-time human walking estimation with radar

    NARCIS (Netherlands)

    Dorp, Ph. van; Groen, F.C.A.

    2003-01-01

    Radars can be used to observe persons. Animation of an observed human on the basis of Frequency Modulated Continuous Wave (FMCW) radar measurements in virtual reality considerably facilitates the interpretation of the radar measurements. These radar measurements give detailed information of the moti

  18. Decision Tool for optimal deployment of radar systems

    NARCIS (Netherlands)

    Vogel, M.H.

    1995-01-01

    A Decision Tool for air defence is presented. This Decision Tool, when provided with information about the radar, the environment, and the expected class of targets, informs the radar operator about detection probabilities. This assists the radar operator to select the optimum radar parameters. n th

  19. Foliage penetration radar detection and characterization of objects under trees

    CERN Document Server

    Davis, Mark

    2011-01-01

    This book covers all aspects of foliage penetration (FOPEN) radar, concentrating on both airborne military radar systems as well as earth resource mapping radars. It is the first concise and thorough treatment of FOPEN, covering the results of a decade-long investment by DARPA in characterizing foliage and earth surface with ultrawideband UHF and VHF synthetic aperture radar (SAR).

  20. Passive Multistatic Detection of Maritime Targets using Opportunistic Radars

    Science.gov (United States)

    2014-03-01

    optimal configuration using MATLAB simulation. The simulation results are obtained using actual system parameters extracted from civil marine radar ...Bistatic Radar . Norwood, MA: Artech House, Technology Service Corporation, p. 1, 1995. [2] D. C. Jenn, Radar and Laser Cross Section Engineering...MULTISTATIC DETECTION OF MARITIME TARGETS USING OPPORTUNISTIC RADARS by Chong Sze Sing March 2014 Thesis Advisor: Herschel H. Loomis Co-Advisor

  1. Pedestrian recognition using automotive radar sensors

    Science.gov (United States)

    Bartsch, A.; Fitzek, F.; Rasshofer, R. H.

    2012-09-01

    The application of modern series production automotive radar sensors to pedestrian recognition is an important topic in research on future driver assistance systems. The aim of this paper is to understand the potential and limits of such sensors in pedestrian recognition. This knowledge could be used to develop next generation radar sensors with improved pedestrian recognition capabilities. A new raw radar data signal processing algorithm is proposed that allows deep insights into the object classification process. The impact of raw radar data properties can be directly observed in every layer of the classification system by avoiding machine learning and tracking. This gives information on the limiting factors of raw radar data in terms of classification decision making. To accomplish the very challenging distinction between pedestrians and static objects, five significant and stable object features from the spatial distribution and Doppler information are found. Experimental results with data from a 77 GHz automotive radar sensor show that over 95% of pedestrians can be classified correctly under optimal conditions, which is compareable to modern machine learning systems. The impact of the pedestrian's direction of movement, occlusion, antenna beam elevation angle, linear vehicle movement, and other factors are investigated and discussed. The results show that under real life conditions, radar only based pedestrian recognition is limited due to insufficient Doppler frequency and spatial resolution as well as antenna side lobe effects.

  2. Using phase for radar scatterer classification

    Science.gov (United States)

    Moore, Linda J.; Rigling, Brian D.; Penno, Robert P.; Zelnio, Edmund G.

    2017-04-01

    Traditional synthetic aperture radar (SAR) systems tend to discard phase information of formed complex radar imagery prior to automatic target recognition (ATR). This practice has historically been driven by available hardware storage, processing capabilities, and data link capacity. Recent advances in high performance computing (HPC) have enabled extremely dense storage and processing solutions. Therefore, previous motives for discarding radar phase information in ATR applications have been mitigated. First, we characterize the value of phase in one-dimensional (1-D) radar range profiles with respect to the ability to correctly estimate target features, which are currently employed in ATR algorithms for target discrimination. These features correspond to physical characteristics of targets through radio frequency (RF) scattering phenomenology. Physics-based electromagnetic scattering models developed from the geometrical theory of diffraction are utilized for the information analysis presented here. Information is quantified by the error of target parameter estimates from noisy radar signals when phase is either retained or discarded. Operating conditions (OCs) of signal-tonoise ratio (SNR) and bandwidth are considered. Second, we investigate the value of phase in 1-D radar returns with respect to the ability to correctly classify canonical targets. Classification performance is evaluated via logistic regression for three targets (sphere, plate, tophat). Phase information is demonstrated to improve radar target classification rates, particularly at low SNRs and low bandwidths.

  3. EISCAT radar observations of enhanced incoherent scatter spectra; their relation to red aurora and field-aligned currents

    Energy Technology Data Exchange (ETDEWEB)

    Collis, P.N. (EISCAT, Kiruna (Sweden)); Haeggstroem, I. (IRF, Kiruna (Sweden)); Kaila, K. (Univ. of Oulu (Finland)); Rietveld, M.T. (EISCAT, Ramfjordmoen (Norway))

    1991-06-01

    Enhancements of one, or both, of the ion-acoustic peaks of incoherent scatter spectra in the auroral ionosphere have been observed with the EISCAT UHF and VHF radars. All occurrences for which optical data are available show these events to coincide with active, unusually intense, red auroral forms in the vicinity of the radar beam at high altitudes. Both the optical and the radar signatures are expected to be caused by large fluxes of low energy electrons. Analyses of the measured spectra, in which the electron drift speed is estimated, imply field-aligned current densities up to several mA m{sup {minus}2}. The vertically-directed VHF observations from {approximately}1,000 km altitude reveal that the spectral enhancements, which are transient features in field-aligned measurements, can exist for up to several minutes.

  4. Polarization changing technique in macrocosm and it's application to radar

    Institute of Scientific and Technical Information of China (English)

    潘健; 毛二可

    2004-01-01

    A new model of air-surveillance radar (named polarization changing in macrocosm radar: PCM radar), which makes use of the polarization changing technique in macrocosm, is presented in this paper. On basis of careful selection of representative 98 states of polarization in macrocosm, PCM radar can not only perform transmitting and receiving polarization matching for various targets, consequently make full use of transmitting and receiving signals of radar, but also improve the capability against active interference and jamming. Experimental test in air defense early-warning radar system demonstrates that it can effectively enhance radar performance.

  5. Canadian Meteor Orbit Radar (CMOR

    Directory of Open Access Journals (Sweden)

    A. R. Webster

    2004-01-01

    Full Text Available The radar system described here (CMOR comprises a basic 5-element receiving system, co-located with a pulsed transmitter, specifically designed to observe meteor echoes and to determine their position in space with an angular resolution of ~1° and a radial resolution of ~3 km. Two secondary receiving sites, a few km distant and arranged to form approximately a right angle with the base station, allow the determination of the velocity (speed and direction of the meteor that, together with the time of occurrence, lead to an estimate of the orbit of the original meteoroid. Some equipment details are presented along with a method used to determine the orbits. Representative echoes are shown and observations on the 2002 Leonid shower presented.

  6. Navigator alignment using radar scan

    Energy Technology Data Exchange (ETDEWEB)

    Doerry, Armin W.; Marquette, Brandeis

    2016-04-05

    The various technologies presented herein relate to the determination of and correction of heading error of platform. Knowledge of at least one of a maximum Doppler frequency or a minimum Doppler bandwidth pertaining to a plurality of radar echoes can be utilized to facilitate correction of the heading error. Heading error can occur as a result of component drift. In an ideal situation, a boresight direction of an antenna or the front of an aircraft will have associated therewith at least one of a maximum Doppler frequency or a minimum Doppler bandwidth. As the boresight direction of the antenna strays from a direction of travel at least one of the maximum Doppler frequency or a minimum Doppler bandwidth will shift away, either left or right, from the ideal situation.

  7. Phased-MIMO Radar: A Tradeoff Between Phased-Array and MIMO Radars

    CERN Document Server

    Hassanien, Aboulnasr

    2009-01-01

    We propose a new technique for multiple-input multiple-output (MIMO) radar with colocated antennas which we call phased-MIMO radar. The new technique enjoys the advantages of MIMO radar without sacrificing the main advantage of phased-array radar which is the coherent processing gain at the transmitting side. The essence of the proposed technique is to partition the transmitting array into a number of subarrays that are allowed to overlap. Then, each subarray is used to coherently transmit a waveform which is orthogonal to the waveforms transmitted by other subarrays. Coherent processing gain can be achieved by designing a weight vector for each subarray to form a beam towards a certain direction in space. Moreover, the subarrays are combined jointly to form a MIMO radar resulting in higher resolution capabilities. The substantial improvements offered by the proposed phased-MIMO radar technique as compared to previous techniques are demonstrated analytically and by simulations through analysis of the correspo...

  8. A Scanning Microwave Radar and Radiometer

    DEFF Research Database (Denmark)

    Skou, Niels

    1995-01-01

    The Scanning Microwave Radar and Radiometer (SMRR) is a line scanner featuring a combined radar and radiometer system operating around 35 and 94 GHz. The layout of the SMRR is shown. The 2 offset antenna parabolas scan in synchronism, the receiver antenna has the highest gain in order to ensure...... that footprints are identical for the radar and the radiometer. The instrument will be flown in a pod under a Gulfstream G3 normally cruising with 240 m/sec at 12500 m, and will thus be able to sense clouds and precipitation from above...

  9. The Italian involvement in Cassini radar

    Science.gov (United States)

    Nirchio, F.; Pernice, B.; Borgarelli, L.; Dionisio, C.

    1991-12-01

    The Radio Frequency Electronic Subsystem (RFES) of the Cassini radar is described. The requirements of the Cassini radar are summarized. The design parameters taken into consideration in developing the RFES are described. The RFES interfaces with the High Gain Antenna (HGA) for signal transmission and reception. The operational parameters of the Cassini radar are presented. The front end electronics (FEE), microwave receiver (MR), high power amplifier (HPA), frequency generator (FG), digital chip generator (DCG), Chirp Up Converter and Amplifier (CUCA) and power supply of the RFES are described.

  10. Radar signal processing and its applications

    CERN Document Server

    Hummel, Robert; Stoica, Petre; Zelnio, Edmund

    2003-01-01

    Radar Signal Processing and Its Applications brings together in one place important contributions and up-to-date research results in this fast-moving area. In twelve selected chapters, it describes the latest advances in architectures, design methods, and applications of radar signal processing. The contributors to this work were selected from the leading researchers and practitioners in the field. This work, originally published as Volume 14, Numbers 1-3 of the journal, Multidimensional Systems and Signal Processing, will be valuable to anyone working or researching in the field of radar signal processing. It serves as an excellent reference, providing insight into some of the most challenging issues being examined today.

  11. Pitfalls and possibilities of radar compressive sensing.

    Science.gov (United States)

    Goodman, Nathan A; Potter, Lee C

    2015-03-10

    In this paper, we consider the application of compressive sensing (CS) to radar remote sensing applications. We survey a suite of practical system-level issues related to the compression of radar measurements, and we advocate the consideration of these issues by researchers exploring potential gains of CS in radar applications. We also give abbreviated examples of decades-old radio-frequency (RF) practices that already embody elements of CS for relevant applications. In addition to the cautionary implications of system-level issues and historical precedents, we identify several promising results that RF practitioners may gain from the recent explosion of CS literature.

  12. Radar, sonar, and holography an introduction

    CERN Document Server

    Kock, Winston E

    1974-01-01

    Radar, Sonar, and Holography: An Introduction provides an introduction to the technology of radar and sonar. Because the new science of holography is affecting both these fields quite strongly, the book includes an explanation of the fundamental principles underlying this new art (including the subjects of wave coherence, interference, and diffraction) and of the hologram process itself. Finally, numerous examples are discussed which show how holography is providing new horizons to radar and sonar systems. The book thus also provides a simple approach to the new technology of holography. The

  13. Robust adaptive beamforming for MIMO monopulse radar

    Science.gov (United States)

    Rowe, William; Ström, Marie; Li, Jian; Stoica, Petre

    2013-05-01

    Researchers have recently proposed a widely separated multiple-input multiple-output (MIMO) radar using monopulse angle estimation techniques for target tracking. The widely separated antennas provide improved tracking performance by mitigating complex target radar cross-section fades and angle scintillation. An adaptive array is necessary in this paradigm because the direct path from any transmitter could act as a jammer at a receiver. When the target-free covariance matrix is not available, it is critical to include robustness into the adaptive beamformer weights. This work explores methods of robust adaptive monopulse beamforming techniques for MIMO tracking radar.

  14. Satellite radar for monitoring forest resources

    Science.gov (United States)

    Hoffer, Roger M.; Lee, Kyu-Sung

    1990-01-01

    An evaluation is made of the computer analysis results of a study which used Seasat satellite radar data obtained in 1978 and Shuttle Imaging Radar-B data obtained in 1984. The change-detection procedures employed demonstrate that deforestation and reforestation activities can be effectively monitored on the basis of radar data gathered at satellite altitudes. The computer-processing techniques applied to the data encompassed (1) overlay display, (2) ratios, (3) differences, (4) principal-component analysis, and (5) classification; of these, overlay display is noted to quickly and easily yield a qualitative display of the multidate data.

  15. Noise radar with broadband microwave ring correlator

    Science.gov (United States)

    Susek, Waldemar; Stec, Bronislaw

    2011-06-01

    A principle of quadrature correlation detection of noise signals using an analog broadband microwave correlator is presented in the paper. Measurement results for the correlation function of noise signals are shown and application of such solution in the noise radar for precise determination of distance changes and velocity of these changes is also presented. Results for short range noise radar operation are presented both for static and moving objects. Experimental results using 2,6 - 3,6 GHz noise like waveform for the signal from a breathing human is presented. Conclusions and future plans for applications of presented detection technique in broadband noise radars bring the paper to an end.

  16. Highly Integrated Radar Sensor-on-Chip

    Science.gov (United States)

    Mende, Ralph

    2012-05-01

    A highly integrated 24 GHz radar sensor is presented, based on a Radio Frequency Integrated Circuit (RFIC) which was specifically developed for a Frequency Modulated Shift Keying (FMSK) based Radar system design. Antenna, waveform, the Radio Frequency (RF) and Digital Signal Processor (DSP) module, the software design, cost and performance aspects will be described. The significant technical and economical advantages of the implemented Silicon-Germanium (SiGe) Bipolar CMOS (BiCMOS) transceiver are demonstrated. Some automotive and other applications based on this technology and new radar system design will be explained.

  17. Modeling Characteristics Of Surfaces For Radar Polarimetry

    Science.gov (United States)

    Van Zyl, Jakob J.; Zebker, Howard A.; Durden, Stephen L.

    1992-01-01

    Paper reviews mathematical models of polarimetric radar backscattering characteristics of various types of terrain; forests, grasslands, and lava fields. Represents approach to imaging radar polarimetry in which one accumulates models predicting realistic polarization signatures and represent distinct scattering processes, without attempting full vector solutions of Maxwell's equations in all cases. Idea to develop ability to invert models to identify unknown terrain depicted in polarimetric radar images. Describes models, major scattering characteristics predicted by models, and interpretation of characteristics in terms of dominant scattering mechanisms. Models predict realistic polarization signatures.

  18. Radar Exploration of Cometary Nuclei

    Science.gov (United States)

    Gim, Yonggyu; Heggy, E.; Belton, M.; Weissman, P.; Asphaug, E.

    2012-10-01

    We have developed a mission formulation, based on the use of previously flown planetary radar sounding techniques, to image the 3D internal structure of the nucleus of a Jupiter-family comet (JFC). Believed to originate in the outer solar system and to be delivered recently to the inner solar system from the Kuiper Belt, JFCs are among the most primitive bodies accessible by spacecraft, and are indicated in the 2010 Decadal Survey as primary targets for primitive bodies sample return. We consider a sounder design operating at dual frequencies, 5 and 15 MHz center frequencies with 1 and 10 MHz bandwidths, respectively. Operating from close orbit about the nucleus of a spinning comet nucleus, CORE obtains a dense network of echoes that are used to image its interior structure to 10 m and to map the dielectric properties inside the nucleus to better than 200 m throughout. Clear images of internal structure and dielectric composition will reveal how the nucleus was formed and how it has evolved. Radiometric tracking of the spacecraft orbit will provide an interior mass distribution that constrains the radar-based models of interior composition. High-resolution visible and infrared color images provide surface and exterior boundary conditions for interior models and hypotheses. They present the geology and morphology of the nucleus surface at meter-scales, and the time-evolving activity, structure, and composition of the inner coma. By making global yet detailed connections from interior to exterior, the data from CORE will provide answers to fundamental questions about the earliest stages of planetesimal evolution and planet formation, will be an important complement to the Rosetta mission science, and will lay the foundation for comet nucleus sample return.

  19. Comparing helicopter-borne profiling radar with airborne laser scanner data for forest structure estimation.

    Science.gov (United States)

    Piermattei, Livia; Hollaus, Markus; Pfeifer, Norbert; Chen, Yuwei; Karjalainen, Mika; Hakala, Teemu; Hyyppä, Juha; Wagner, Wolfgang

    2017-04-01

    Forests are complex ecosystems that show substantial variation with respect to climate, management regime, stand history, disturbance, and needs of local communities. The dynamic processes of growth and disturbance are reflected in the structural components of forests that include the canopy vertical structure and geometry (e.g. size, height, and form), tree position and species diversity. Current remote-sensing systems to measure forest structural attributes include passive optical sensors and active sensors. The technological capabilities of active remote sensing like the ability to penetrate the vegetation and provide information about its vertical structure has promoted an extensive use of LiDAR (Light Detection And Ranging) and radar (RAdio Detection And Ranging) system over the last 20 years. LiDAR measurements from aircraft (airborne laser scanning, ALS) currently represents the primary data source for three-dimensional information on forest vertical structure. Contrary, despite the potential of radar remote sensing, their use is not yet established in forest monitoring. In order to better understand the interaction of pulsed radar with the forest canopy, and to increase the feasibility of this system, the Finnish Geospatial Research Institute has developed a helicopter-borne profiling radar system, called TomoRadar. TomoRadar is capable of recording a canopy-penetrating profile of forests. To georeference the radar measurements the system was equipped with a global navigation satellite system and an inertial measurement unit with a centimeter level accuracy of the flight trajectory. The TomoRadar operates at Ku-band, (wave lengths λ 1.5cm) with two separated parabolic antennas providing co- and cross-polarization modes. The purpose of this work is to investigate the capability of the TomoRadar system, for estimating the forest vertical profile, terrain topography and tree height. We analysed 600 m TomoRadar crosspolarized (i.e. horizontal - vertical

  20. Comparison of Two Detection Combination Algorithms for Phased Array Radars

    Science.gov (United States)

    2015-07-01

    weapon guidance. It can also be used effectively for secure communications [1]. In an MFR, the radar surveillance plays a critical role to optimize the...horizon/surface search, detection confirmation, multi-target tracking and cued search. The simulated radar has an aperture of 1 m2. The antennas...Comparison of Two Detection Combination Algorithms for Phased Array Radars Zhen Ding and Peter Moo Wide Area Surveillance Radar Group Radar

  1. Using doppler radar images to estimate aircraft navigational heading error

    Science.gov (United States)

    Doerry, Armin W [Albuquerque, NM; Jordan, Jay D [Albuquerque, NM; Kim, Theodore J [Albuquerque, NM

    2012-07-03

    A yaw angle error of a motion measurement system carried on an aircraft for navigation is estimated from Doppler radar images captured using the aircraft. At least two radar pulses aimed at respectively different physical locations in a targeted area are transmitted from a radar antenna carried on the aircraft. At least two Doppler radar images that respectively correspond to the at least two transmitted radar pulses are produced. These images are used to produce an estimate of the yaw angle error.

  2. Synthetic impulse and aperture radar (SIAR) a novel multi-frequency MIMO radar

    CERN Document Server

    Chen, Baixiao

    2014-01-01

    Analyzes and discusses the operating principle, signal processing method, and experimental results of this advanced radar technology This book systematically discusses the operating principle, signal processing method, target measurement technology, and experimental results of a new kind of radar called synthetic impulse and aperture radar (SIAR). The purpose is to help readers acquire an insight into the concept and principle of the SIAR, to know its operation mode, signal processing method, the difference between the traditional radar and itself, the designing ideals, and the developing me

  3. Validation of GPM Ka-Radar Algorithm Using a Ground-based Ka-Radar System

    Science.gov (United States)

    Nakamura, Kenji; Kaneko, Yuki; Nakagawa, Katsuhiro; Furukawa, Kinji; Suzuki, Kenji

    2016-04-01

    GPM led by the Japan Aerospace Exploration Agency (JAXA) and the National Aeronautics and Space Administration of US (NASA) aims to observe global precipitation. The core satellite is equipped with a microwave radiometer (GMI) and a dual-frequency radar (DPR) which is the first spaceborne Ku/Ka-band dual-wavelength radar dedicated for precipitation measurement. In the DPR algorithm, measured radar reflectivity is converted to effective radar reflectivity by estimating the rain attenuation. Here, the scattering/attenuation characteristics of Ka-band radiowaves are crucial, particularly for wet snow. A melting layer observation using a dual Ka-band radar system developed by JAXA was conducted along the slope of Mt. Zao in Yamagata Prefecture, Japan. The dual Ka-band radar system consists of two nearly identical Ka-band FM-CW radars, and the precipitation systems between two radars were observed in opposite directions. From this experiment, equivalent radar reflectivity (Ze) and specific attenuation (k) were obtained. The experiments were conducted for two winter seasons. During the data analyses, it was found that k estimate easily fluctuates because the estimate is based on double difference calculation. With much temporal and spatial averaging, k-Ze relationship was obtained for melting layers. One of the results is that the height of the peak of k seems slightly higher than that of Ze. The results are compared with in-situ precipitation particle measurements.

  4. A portable W-band radar system for enhancement of infrared vision in fire fighting operations

    Science.gov (United States)

    Klenner, Mathias; Zech, Christian; Hülsmann, Axel; Kühn, Jutta; Schlechtweg, Michael; Hahmann, Konstantin; Kleiner, Bernhard; Ulrich, Michael; Ambacher, Oliver

    2016-10-01

    In this paper, we present a millimeter wave radar system which will enhance the performance of infrared cameras used for fire-fighting applications. The radar module is compact and lightweight such that the system can be combined with inertial sensors and integrated in a hand-held infrared camera. This allows for precise distance measurements in harsh environmental conditions, such as tunnel or industrial fires, where optical sensors are unreliable or fail. We discuss the design of the RF front-end, the antenna and a quasi-optical lens for beam shaping as well as signal processing and demonstrate the performance of the system by in situ measurements in a smoke filled environment.

  5. Investigating nearby exoplanets via interstellar radar

    Science.gov (United States)

    Scheffer, Louis K.

    2014-01-01

    Interstellar radar is a potential intermediate step between passive observation of exoplanets and interstellar exploratory missions. Compared with passive observation, it has the traditional advantages of radar astronomy. It can measure surface characteristics, determine spin rates and axes, provide extremely accurate ranges, construct maps of planets, distinguish liquid from solid surfaces, find rings and moons, and penetrate clouds. It can do this even for planets close to the parent star. Compared with interstellar travel or probes, it also offers significant advantages. The technology required to build such a radar already exists, radar can return results within a human lifetime, and a single facility can investigate thousands of planetary systems. The cost, although too high for current implementation, is within the reach of Earth's economy.

  6. Snowballing and flying under the radar

    DEFF Research Database (Denmark)

    Pötz, Katharina Anna; Hjortsø, Carsten Nico Portefée

    2013-01-01

    management and venture development paths. More specifically, flying under radar in terms of operating under lower institutional requirements, and slowly accumulating resources (snowballing) are major leveraging strategies. We integrate our results into a hypothesized framework for resource management in East...

  7. Tomographic Techniques for Radar Ice Sounding

    DEFF Research Database (Denmark)

    Nielsen, Ulrik

    AbstractLow frequency radars, also known as sounders, can be used for subsurfacemeasurements of Earth’s massive ice sheets. Radar data are essential toimproving ice sheet models for better prediction of the response of theseice sheets to global climate change. While airborne sounders are neededfor...... challenge. This dissertation deals with tomographic techniques based on multiphase-center radars that represent state-of-the-art technology within thefield of ice sounding. The use of advanced tomographic processing forclutter suppression is investigated, which up to this point has beenlargely unexplored...... acquired withthe POLarimetric Airborne Radar Ice Sounder (POLARIS), single-passtomographic surface clutter suppression capabilities are demonstratedfor the system. Using repeat-pass POLARIS data, a method based ondata-driven DOA estimation is used to show an along-track variation ofthe effective scattering...

  8. Space Compatible Radar Absorbing Materials Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This SBIR Phase 1 project shall investigate novel radar absorbing materials (RAM) for use in space or simulated space environments. These materials are lightweight...

  9. Probabilistic forecasts based on radar rainfall uncertainty

    Science.gov (United States)

    Liguori, S.; Rico-Ramirez, M. A.

    2012-04-01

    The potential advantages resulting from integrating weather radar rainfall estimates in hydro-meteorological forecasting systems is limited by the inherent uncertainty affecting radar rainfall measurements, which is due to various sources of error [1-3]. The improvement of quality control and correction techniques is recognized to play a role for the future improvement of radar-based flow predictions. However, the knowledge of the uncertainty affecting radar rainfall data can also be effectively used to build a hydro-meteorological forecasting system in a probabilistic framework. This work discusses the results of the implementation of a novel probabilistic forecasting system developed to improve ensemble predictions over a small urban area located in the North of England. An ensemble of radar rainfall fields can be determined as the sum of a deterministic component and a perturbation field, the latter being informed by the knowledge of the spatial-temporal characteristics of the radar error assessed with reference to rain-gauges measurements. This approach is similar to the REAL system [4] developed for use in the Southern-Alps. The radar uncertainty estimate can then be propagated with a nowcasting model, used to extrapolate an ensemble of radar rainfall forecasts, which can ultimately drive hydrological ensemble predictions. A radar ensemble generator has been calibrated using radar rainfall data made available from the UK Met Office after applying post-processing and corrections algorithms [5-6]. One hour rainfall accumulations from 235 rain gauges recorded for the year 2007 have provided the reference to determine the radar error. Statistics describing the spatial characteristics of the error (i.e. mean and covariance) have been computed off-line at gauges location, along with the parameters describing the error temporal correlation. A system has then been set up to impose the space-time error properties to stochastic perturbations, generated in real-time at

  10. Space-Qualifiable Digital Radar Transceiver Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Historically, radar systems have tended to be either large, complex, power-hungry, purpose-built systems, or extremely simple systems of limited capability. More...

  11. 3D Ground Penetrating Imaging Radar

    OpenAIRE

    ECT Team, Purdue

    2007-01-01

    GPiR (ground-penetrating imaging radar) is a new technology for mapping the shallow subsurface, including society’s underground infrastructure. Applications for this technology include efficient and precise mapping of buried utilities on a large scale.

  12. Physical working principles of medical radar.

    Science.gov (United States)

    Aardal, Øyvind; Paichard, Yoann; Brovoll, Sverre; Berger, Tor; Lande, Tor Sverre; Hamran, Svein-Erik

    2013-04-01

    There has been research interest in using radar for contactless measurements of the human heartbeat for several years. While many systems have been demonstrated, not much attention have been given to the actual physical causes of why this work. The consensus seems to be that the radar senses small body movements correlated with heartbeats, but whether only the movements of the body surface or reflections from internal organs are also monitored have not been answered definitely. There has recently been proposed another theory that blood perfusion in the skin could be the main reason radars are able to detect heartbeats. In this paper, an experimental approach is given to determine the physical causes. The measurement results show that it is the body surface reflections that dominate radar measurements of human heartbeats.

  13. Investigating Nearby Exoplanets via Interstellar Radar

    CERN Document Server

    Scheffer, Louis K

    2013-01-01

    Interstellar radar is a potential intermediate step between passive observation of exoplanets and interstellar exploratory missions. Compared to passive observation, it has the traditional advantages of radar astronomy. It can measure surface characteristics, determine spin rates and axes, provide extremely accurate ranges, construct maps of planets, distinguish liquid from solid surfaces, find rings and moons, and penetrate clouds. It can do this even for planets close to the parent star. Compared to interstellar travel or probes, it also offers significant advantages. The technology required to build such a radar already exists, radar can return results within a human lifetime, and a single facility can investigate thousands of planetary systems. The cost, although high, is within the reach of Earth's economy, so it is cheaper as well.

  14. Lunar Radar Cross Section at Low Frequency

    Science.gov (United States)

    Rodriguez, P.; Kennedy, E. J.; Kossey, P.; McCarrick, M.; Kaiser, M. L.; Bougeret, J.-L.; Tokarev, Y. V.

    2002-01-01

    Recent bistatic measurements of the lunar radar cross-section have extended the spectrum to long radio wavelength. We have utilized the HF Active Auroral Research Program (HAARP) radar facility near Gakona, Alaska to transmit high power pulses at 8.075 MHz to the Moon; the echo pulses were received onboard the NASA/WIND spacecraft by the WAVES HF receiver. This lunar radar experiment follows our previous use of earth-based HF radar with satellites to conduct space experiments. The spacecraft was approaching the Moon for a scheduled orbit perturbation when our experiment of 13 September 2001 was conducted. During the two-hour experiment, the radial distance of the satellite from the Moon varied from 28 to 24 Rm, where Rm is in lunar radii.

  15. A MIMO FMCW radar approach to HFSWR

    Science.gov (United States)

    Hinz, J. O.; Zölzer, U.

    2011-07-01

    In this paper we propose one possible approach how to apply the concept of multiple-input multiple-output (MIMO) to monostatic Frequency Modulated Continuous Wave (FMCW) High-Frequency Surface Wave Radar (HFSWR) in a maritime environment. Common tasks for a HFSWR are sea-state monitoring and ship detection, where our focus is on ship detection. A limiting factor in HFSWR is the available bandwidth, which is inversely proportional to the range resolution capability of the radar and typical below 100 kHz. The question is how to extend or combine a conventional single-input multiple-output (SIMO) FMCW phased-array type radar with stretch processing and the colocated MIMO concept to "reuse" the very limited HF radar band resources. Another important question to answer is how MIMO FMCW waveforms can be separated at the receiver.

  16. Identifying structural damage with ground penetrating radar

    CSIR Research Space (South Africa)

    Van Schoor, Abraham M

    2008-07-01

    Full Text Available Ground penetrating radar (GPR) and electrical resistance tomography (ERT) surveys were conducted in an urban environment in an attempt to identify the cause of severe structural damage to a historically significant residential property...

  17. Radar Training Facility Local Area Network

    Data.gov (United States)

    Department of Transportation — The RTF LAN system provides a progressive training environment for initial and refresher radar training qualification for new and re-hired FAA employees. Its purpose...

  18. Synthetic Aperture Radar Missions Study Report

    Science.gov (United States)

    Bard, S.

    2000-01-01

    This report reviews the history of the LightSAR project and summarizes actions the agency can undertake to support industry-led efforts to develop an operational synthetic aperture radar (SAR) capability in the United States.

  19. Airborne ground penetrating radar: practical field experiments

    CSIR Research Space (South Africa)

    Van Schoor, Michael

    2013-10-01

    Full Text Available The performance of ground penetrating radar (GPR) under conditions where the ground coupling of the antenna is potentially compromised is investigated. Of particular interest is the effect of increasing the distance between the antennae...

  20. Space-qualifiable Digital Radar Transceiver Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Radar technology offers a very flexible, powerful tool for applications such as object detection, tracking, and characterization, as well as remote sensing, imaging,...

  1. Lunar topography - Global determination by radar.

    Science.gov (United States)

    Shapiro, I. I.; Zisk, S. H.; Rogers, A. E. E.; Slade, M. A.; Thompson, T. W.

    1972-01-01

    Previous methods used for two-dimensional radar mapping of the moon are contrasted with new techniques that add altitude information to the radar map. Delay-Doppler stereoscopy and delay-Doppler interferometry are shown to provide surface-height variations with higher accuracy and better global fidelity than has been possible previously. Sample results are presented for altitude contours on the moon as obtained with the Haystack and Westford radar systems of the Massachusetts Institute of Technology. An appendix describes the mathematical principles of delay-Doppler interferometry in determining the position of an arbitrary reflecting region of the lunar surface from measurements of the time delay, Doppler shift, and fringe phase of radar echoes from that region.

  2. Greenland Radar Ice Sheet Thickness Measurements

    Data.gov (United States)

    National Aeronautics and Space Administration — Two 150-MHz coherent radar depth sounders were developed and flown over the Greenland ice sheet to obtain ice thickness measurements in support of PARCA...

  3. Improved Spectrum Analysis Noise Radar Systems.

    Science.gov (United States)

    and evaluated. A new spectrum analysis system designed to detect moving targets is presented. Comparison is made of the detection capabilities of all four noise radar systems in the presence of extraneous noise. (Author)

  4. Architecture for a 1-GHz Digital RADAR

    Science.gov (United States)

    Mallik, Udayan

    2011-01-01

    An architecture for a Direct RF-digitization Type Digital Mode RADAR was developed at GSFC in 2008. Two variations of a basic architecture were developed for use on RADAR imaging missions using aircraft and spacecraft. Both systems can operate with a pulse repetition rate up to 10 MHz with 8 received RF samples per pulse repetition interval, or at up to 19 kHz with 4K received RF samples per pulse repetition interval. The first design describes a computer architecture for a Continuous Mode RADAR transceiver with a real-time signal processing and display architecture. The architecture can operate at a high pulse repetition rate without interruption for an infinite amount of time. The second design describes a smaller and less costly burst mode RADAR that can transceive high pulse repetition rate RF signals without interruption for up to 37 seconds. The burst-mode RADAR was designed to operate on an off-line signal processing paradigm. The temporal distribution of RF samples acquired and reported to the RADAR processor remains uniform and free of distortion in both proposed architectures. The majority of the RADAR's electronics is implemented in digital CMOS (complementary metal oxide semiconductor), and analog circuits are restricted to signal amplification operations and analog to digital conversion. An implementation of the proposed systems will create a 1-GHz, Direct RF-digitization Type, L-Band Digital RADAR--the highest band achievable for Nyquist Rate, Direct RF-digitization Systems that do not implement an electronic IF downsample stage (after the receiver signal amplification stage), using commercially available off-the-shelf integrated circuits.

  5. Integration and Validation of Avian Radars (IVAR)

    Science.gov (United States)

    2011-07-01

    elected to locate the Ra serve as the destination for streaming, storing, and redistributing data applications, including the Radar Fusion Engine (RFE...from a study location documented targets being tracked throughout a full, 360° field-of-view. Methods We elected to use the SEA AR-1 radar located...which are less than 10 m from the cart, are there to warn pedestrians of the obstruction on the sidewalk . 267 268 Figure 6-126. eBirdRad

  6. Polarization Diversity for HF Ground Wave Radar

    Institute of Scientific and Technical Information of China (English)

    QIAO Xiaolin; JIN Ming

    2001-01-01

    A new method of single sample polar-ization filtering is proposed.The algorithm is fast andsuitable for the polarization processing of stationaryor nonstationary polarized disturbed signals with oneor more independent sources of disturbance.An HFground wave polarimetric radar with the ability of ra-dio disturbance suppression is then introduced.Somenumerical results demonstrate the effectiveness of sin-gle sample polarization filtering method for groundwave polarimetric radar.

  7. Knowledge Based Systems and Metacognition in Radar

    Science.gov (United States)

    Capraro, Gerard T.; Wicks, Michael C.

    An airborne ground looking radar sensor's performance may be enhanced by selecting algorithms adaptively as the environment changes. A short description of an airborne intelligent radar system (AIRS) is presented with a description of the knowledge based filter and detection portions. A second level of artificial intelligence (AI) processing is presented that monitors, tests, and learns how to improve and control the first level. This approach is based upon metacognition, a way forward for developing knowledge based systems.

  8. Wideband Antennas for Modern Radar Systems

    OpenAIRE

    Ren, Yu-Jiun; Lai, Chieh-Ping

    2010-01-01

    In this chapter, the basics of the antenna and phased array are reviewed and different wideband antennas for modern radar systems are presented. The concepts of the radome and frequency selective surface are also reviewed. The main contents include important parameters of the antenna, and theory and design consideration of the array antenna. Various wideband antennas are introduced and their performances are demonstrated, including: (1) for the phased array radar, the slotted waveguide array ...

  9. Social Radar Workflows, Dashboards, and Environments

    Science.gov (United States)

    2012-01-01

    shows a mockup of such an interface. Figure 3: Social Radar Interface Mock-Up [21] A major lesson learned is that each data source needs to be...for Social Radar is the Ozone Widget Framework (Ozone). This is a lightweight framework that wraps web applications and exposes them to the analyst...as small applications or widgets inside of a web browser. Additionally, Ozone allows the widgets to communicate with one another via provided

  10. Radar Waveform Design in Active Communications Channel

    OpenAIRE

    Ric A. Romero; Shepherd, Kevin D.

    2013-01-01

    In this paper, we investigate spectrally adaptive radar transmit waveform design and its effects on an active communication system. We specifically look at waveform design for point targets. The transmit waveform is optimized by accounting for the modulation spectrum of the communication system while trying to efficiently use the remaining spectrum. With the use of spectrally-matched radar waveform, we show that the SER detection performance of the communication system ...

  11. An algorithm for radar scene matching based on multi-area selection using fuzzy sets

    Science.gov (United States)

    Yang, Weidong; Zuo, Zhengrong; Zhang, Tianxu; Mao, Haicen

    2005-10-01

    Radar scene matching technique has been widely found in many application fields such as remote sensing, navigation, terrain-map match, scenery variance analysis and so on. Radar image geometry is quite different from that of optical satellite imagery, whose imaging is a slanting imaging of electromagnetic microwave reflection. The different characters between radar image and optical satellite images are very distinct, such as the layover distortion of ground-truth and speckle noise, which degrades the image to such an extent that the features are very unclear and difficult to be extracted. So the factors such as the hypsography, ground truth, sensor altitude and imaging time should be taken into account for radar image and optical image matching. In this paper, we develop an image match algorithm based on reference map multi-area selection using fuzzy sets. Image matching is generally a procedure that calculates the similarity measurement between sensed image and the corresponding intercepted image in reference map and it searches the maximum position in the correlation map. Our method adopts a converse matching strategy which selects multi-areas in optical reference map using fuzzy sets as model images, then match them on the sensed image respectively by normalized cross correlation matching algorithm and fuse the match results to get the optimum registered position. Multi-areas selection mainly considers two influence factors such as ground-truth texture features and the hypsography (DEM) of imaging region, which will suppress the influence of great variance imaging region. Experiment results show the method is effective in registering performance and reducing the calculation.

  12. Radar Baseret Styringspotentiale for Vejle Spildevand

    DEFF Research Database (Denmark)

    Nielsen, Jesper Ellerbæk; Rasmussen, Michael R.

    Denne undersøgelse er initieret af Vejle Spildevands A/S som har bedt Krüger AS om at undersøge styringspotentialet i Vejle by på baggrund af Vejles LAWR radar. Aalborg Universitet har derfor fået til opgave at sammenligne LAWR radaren med både regnmålere og DMI’s Virring radar i 3 udvalgte...... er baseret på 8 SVK-regnmålerne i og omkring Vejle og er desuden sammenlignet med regn estimater fra DMI’s metrologiske C-bånds radar, der er placeret nær Virring ca. 45 km nord-øst for Vejle. De to radarer er i undersøgelsen kalibreres/justeres efter tre forskellige metoder. Det er vigtigt...... at pointere, at datagrundlaget for såvel kalibrering og validering er det samme for de to radarer. Der er således i undersøgelsen kun anvendt data hvor begge radarer har fungeret, således at radarenes kvalitet er evalueret under eksakt samme meteorologiske forhold og med de samme regnmålerdata. Følgende tre...

  13. Airborne Radar Interferometric Repeat-Pass Processing

    Science.gov (United States)

    Hensley, Scott; Michel, Thierry R.; Jones, Cathleen E.; Muellerschoen, Ronald J.; Chapman, Bruce D.; Fore, Alexander; Simard, Marc; Zebker, Howard A.

    2011-01-01

    Earth science research often requires crustal deformation measurements at a variety of time scales, from seconds to decades. Although satellites have been used for repeat-track interferometric (RTI) synthetic-aperture-radar (SAR) mapping for close to 20 years, RTI is much more difficult to implement from an airborne platform owing to the irregular trajectory of the aircraft compared with microwave imaging radar wavelengths. Two basic requirements for robust airborne repeat-pass radar interferometry include the ability to fly the platform to a desired trajectory within a narrow tube and the ability to have the radar beam pointed in a desired direction to a fraction of a beam width. Uninhabited Aerial Vehicle Synthetic Aperture Radar (UAVSAR) is equipped with a precision auto pilot developed by NASA Dryden that allows the platform, a Gulfstream III, to nominally fly within a 5 m diameter tube and with an electronically scanned antenna to position the radar beam to a fraction of a beam width based on INU (inertial navigation unit) attitude angle measurements.

  14. Weather radar rainfall data in urban hydrology

    Science.gov (United States)

    Thorndahl, Søren; Einfalt, Thomas; Willems, Patrick; Ellerbæk Nielsen, Jesper; ten Veldhuis, Marie-Claire; Arnbjerg-Nielsen, Karsten; Rasmussen, Michael R.; Molnar, Peter

    2017-03-01

    Application of weather radar data in urban hydrological applications has evolved significantly during the past decade as an alternative to traditional rainfall observations with rain gauges. Advances in radar hardware, data processing, numerical models, and emerging fields within urban hydrology necessitate an updated review of the state of the art in such radar rainfall data and applications. Three key areas with significant advances over the past decade have been identified: (1) temporal and spatial resolution of rainfall data required for different types of hydrological applications, (2) rainfall estimation, radar data adjustment and data quality, and (3) nowcasting of radar rainfall and real-time applications. Based on these three fields of research, the paper provides recommendations based on an updated overview of shortcomings, gains, and novel developments in relation to urban hydrological applications. The paper also reviews how the focus in urban hydrology research has shifted over the last decade to fields such as climate change impacts, resilience of urban areas to hydrological extremes, and online prediction/warning systems. It is discussed how radar rainfall data can add value to the aforementioned emerging fields in current and future applications, but also to the analysis of integrated water systems.

  15. An imaging interferometry capability for the EISCAT Svalbard Radar

    Directory of Open Access Journals (Sweden)

    T. Grydeland

    2005-01-01

    Full Text Available Interferometric imaging (aperture synthesis imaging is a technique used by radio astronomers to achieve angular resolution that far surpasses what is possible with a single large aperture. A similar technique has been used for radar imaging studies of equatorial ionospheric phenomena at the Jicamarca Radio Observatory. We present plans for adding an interferometric imaging capability to the EISCAT Svalbard Radar (ESR, a capability which will contribute significantly to several areas of active research, including naturally and artificially enhanced ion-acoustic echoes and their detailed relation in space and time to optical phenomena, polar mesospheric summer echoes (PMSE, and meteor studies.

    Interferometry using the two antennas of the ESR has demonstrated the existence of extremely narrow, field-aligned scattering structures, but having only a single baseline is a severe limitation for such studies. Building additional IS-class antennas at the ESR is not a trivial task. However, the very high scattering levels in enhanced ion-acoustic echoes and PMSE means that a passive receiver antenna of more modest gain should still be capable of detecting these echoes.

    In this paper we present simulations of what an imaging interferometer will be capable of observing for different antenna configurations and brightness distributions, under ideal conditions, using two different image inversion algorithms. We also discuss different antenna and receiver technologies.

  16. Shaping Asteroid with Genetic Evolution (SAGE) using lightcurve and radar data

    Science.gov (United States)

    Dudzinski, Grzegorz; Bartczak, Przemyslaw

    2016-10-01

    We are presenting new module added to SAGE (Shaping Asteroids with Genetic Evolution) algorithm (Bartczak et.al, 2014) which employs radar echo images.Asteroids can be observed using many ground-based techniques, some of which allow for direct shape observations ( eg. stellar occultations, adaptive optics imaging). One interesting, information-rich technique is radar imaging. It provides insights about surface properties, sizes, pole orientations and shapes of asteroids (Ostro, 2012). Radar echo images can be used both for modelling asteroids and testing results from lightcurve inversion methods. We aim to use radar images in SAGE algorithm the same way we use lightcurves.Genetic algorithm starts with the sphere and random values for pole orientation. Then, by introducing small, random changes to the model parameters, a population of shapes and spin states is created. Subsequently, best model from the population is chosen and process is repeated until stable solution is reached. Assuming even distribution of mass we calculate center of mass and moment of inertia for each model.For every intermediate step model we calculate synthetic lightcurves and compare it with observations with χ2 test. Following the same principle, we create simulated radar echo images for a model and compare them with the observed ones. Both χ2 values for lightcurve and radar are then used as a benchmark for choosing the best model in given population. The best one found serves as a starting model for the next generation of randomly modified models.We are showing a model of 1996HW1 obtained using the described method.

  17. A statistical survey of dayside pulsed ionospheric flows as seen by the CUTLASS Finland HF radar

    Directory of Open Access Journals (Sweden)

    K. A. McWilliams

    Full Text Available Nearly two years of 2-min resolution data and 7- to 21-s resolution data from the CUTLASS Finland HF radar have undergone Fourier analysis in order to study statistically the occurrence rates and repetition frequencies of pulsed ionospheric flows in the noon-sector high-latitude ionosphere. Pulsed ionospheric flow bursts are believed to be the ionospheric footprint of newly reconnected geomagnetic field lines, which occur during episodes of magnetic flux transfer to the terrestrial magnetosphere - flux transfer events or FTEs. The distribution of pulsed ionospheric flows were found to be well grouped in the radar field of view, and to be in the vicinity of the radar signature of the cusp footprint. Two thirds of the pulsed ionospheric flow intervals included in the statistical study occurred when the interplanetary magnetic field had a southward component, supporting the hypothesis that pulsed ionospheric flows are a reconnection-related phenomenon. The occurrence rate of the pulsed ionospheric flow fluctuation period was independent of the radar scan mode. The statistical results obtained from the radar data are compared to occurrence rates and repetition frequencies of FTEs derived from spacecraft data near the magnetopause reconnection region, and to ground-based optical measurements of poleward moving auroral forms. The distributions obtained by the various instruments in different regions of the magnetosphere were remarkably similar. The radar, therefore, appears to give an unbiased sample of magnetopause activity in its routine observations of the cusp footprint.

    Key words: Magnetospheric physics (magnetosphere-ionosphere interactions; plasma convection; solar wind-magnetosphere interactions

  18. Integrated Optic Signal Processors for Wideband Radar Systems.

    Science.gov (United States)

    1980-05-01

    Tokyo, Japan (to appear in Japanese Journal of Applied Physics , April 1980). 13. C.S. Tsai, "A Review on Guided-Wave Acoustooptics With Application to...presented at the 1979 International Solid-State Devices Conference, August 27-29, Tokyo, Japan, (To be pub- lished in Japanese Journal of Applied Physics , April

  19. Comparison of atmospheric refraction at radar and optical wavelengths

    NARCIS (Netherlands)

    Kunz, G.J.; Heemskerk, E.; Eijk, A.M.J. van

    2005-01-01

    A study is carried out to classify possible combinations of refractivity conditions for RF and IR over a wide range of meteorological conditions using different micrometeorological bulk models. The calculated refractivity profiles are analyzed for evaporation duct height (EDH), mainly relevant for

  20. Hybrid Optical/Digital Processor for Radar Imaging

    Science.gov (United States)

    2007-11-02

    DDR2 SRAM 2, 4 MB 36 DDR2 SRAM 2, 4 MB DDR2 SRAM 2, 4 MB...36DDR2 SRAM 2, 4 MB DDR2 SRAM 2, 4 MB DDR2 SRAM 2, 4 MB 36 36 36 Prog Osc 3 DDR SDRAM 64 MB 32 88 88 PE 1 VIRTEXTM II XC2V 6000, 8000 I/O #1 DDR2 SRAM 2...4 MB 36 DDR2 SRAM 2, 4 MB DDR2 SRAM 2, 4 MB 36DDR2 SRAM 2, 4 MB DDR2 SRAM 2, 4 MB DDR2 SRAM 2, 4 MB 36 36 36 Prog Osc 3 DDR SDRAM 64 MB 32 168 PE

  1. Raindrop size distribution and radar reflectivity-rain rate relationships for radar hydrology

    NARCIS (Netherlands)

    Uijlenhoet, R.

    2001-01-01

    The conversion of the radar reflectivity factor Z (mm6m-3) to rain rate R (mm h-1) is a crucial step in the hydrological application of weather radar measurements. It has been common practice for over 50 years now to take for this conversion a simple power law relationship between Z and R. It is the

  2. Optic glioma

    Science.gov (United States)

    Glioma - optic; Optic nerve glioma; Juvenile pilocytic astrocytoma; Brain cancer - optic glioma ... Optic gliomas are rare. The cause of optic gliomas is unknown. Most optic gliomas are slow-growing ...

  3. Radar glory from buried craters on icy moons

    Science.gov (United States)

    Eshleman, Von R.

    1986-10-01

    Three ice-covered moons of Jupiter, in comparison with rocky planets and earth's moon, produce radar echoes of astounding strengths and bizarre polarizations. Scattering from buried craters can explain these and other anomalous properties of the echoes. The role of such craters is analogous to that of the water droplets that create the apparition known as 'the glory', the optically bright region surrounding an observer's shadow on a cloud. Both situations involve the electromagnetic phenomenon of total internal reflection at a dielectric interface, operating in a geometry that strongly favors exact backscattering. Dim surface craters are transformed into bright glory holes by being buried under somewhat denser material, thereby increasing the intensity of their echoes by factors of hundreds. The dielectric interface thus formed at the crater walls nicely accounts for the unusual polarizations of the echoes.

  4. A novel backpackable ice-penetrating radar system

    Science.gov (United States)

    Matsuoka, Kenichi; Saito, Ryoji; Naruse, Renji

    We have developed a novel ice-penetrating radar system that can be carried on a backpack. Including batteries for a 3 hour continuous measurement, the total weight is 13 kg. In addition, it operates reliably down to -25°C, has a low power consumption of 24 W, and is semi-waterproof. The system has a built-in-one controller with a high-brightness display for reading data quickly, a receiver with 12-bit digitizing, and a 1 kV pulse transmitter in which the pulse amplitude varies by <0.2%. Optical communications between components provides low-noise data acquisition and allows synchronizing of the pulse transmission with sampling. Measurements with the system revealed the 300 m deep bed topography of a temperate valley glacier in the late ablation season.

  5. Tropical Mangrove Mapping Using Fully-Polarimetric Radar Data

    Directory of Open Access Journals (Sweden)

    Bambang Trisasongko

    2009-09-01

    Full Text Available Although mangrove is one of important ecosystems in the world, it has been abused and exploited by human for various purposes. Monitoring mangrove is therefore required to maintain a balance between economy and conservation and provides up-to-date information for rehabilitation. Optical remote sensing data have delivered such information, however ever-changing atmospheric disturbance may significantly decrease thematic content. In this research, Synthetic Aperture Radar (SAR fully polarimetric data were evaluated to present an alternative for mangrove mapping. Assessment using three statistical trees was performed on both tonal and textural data. It was noticeable that textural data delivered fairly good improvement which reduced the error rate to around 5-6% at L-band. This suggests that insertion of textural data is more important than any information derived from decomposition algorithm.

  6. Radar principles for the nonspecialist, 3rd edition

    CERN Document Server

    Toomay, John

    2004-01-01

    Radar Principles for the Non-specialist, Third Edition continues its popular tradition: to distill the very complex technology of radar into its fundamentals, tying them to the laws of nature on one end and to the most modern and complex systems on the other. It starts with electromagnetic propagation, describes a radar of the utmost simplicity, and derives the radar range equation from that simple radar. Once the range equation is available, the book attacks the meaning of each term in it, moving through antennas, detection and tracking, radar cross-section, waveforms andsignal proces

  7. Radar activities of the DFVLR Institute for Radio Frequency Technology

    Science.gov (United States)

    Keydel, W.

    1983-01-01

    Aerospace research and the respective applications microwave tasks with respect to remote sensing, position finding and communication are discussed. The radar activities are directed at point targets, area targets and volume targets; they center around signature research for earth and ocean remote sensing, target recognition, reconnaissance and camouflage and imaging and area observation radar techniques (SAR and SLAR). The radar activities cover a frequency range from 1 GHz up to 94 GHz. The radar program is oriented to four possible application levels: ground, air, shuttle orbits and satellite orbits. Ground based studies and measurements, airborne scatterometers and imaging radars, a space shuttle radar, the MRSE, and follow on experiments are considered.

  8. Sea clutter scattering, the K distribution and radar performance

    CERN Document Server

    Ward, Keith; Watts, Simon

    2013-01-01

    Sea Clutter: Scattering, the K Distribution and Radar Performance, 2nd Edition gives an authoritative account of our current understanding of radar sea clutter. Topics covered include the characteristics of radar sea clutter, modelling radar scattering by the ocean surface, statistical models of sea clutter, the simulation of clutter and other random processes, detection of small targets in sea clutter, imaging ocean surface features, radar detection performance calculations, CFAR detection, and the specification and measurement of radar performance. The calculation of the performance of pract

  9. Sense and avoid radar for micro/nano robots

    Science.gov (United States)

    Molchanov, Pavlo A.; Asmolova, Olha

    2014-10-01

    Revolutionary new fly eye radar sensor technologies based on an array of directional antennas is eliminating the need for a mechanical scanning antenna or complicated phase processor. Proposed sense and avoid radar based on fly eye radar technology can be very small, provides continuous surveillance of entire sky (360 degree by azimuth and elevation) and can be applied for separate or swarm of micro/nano UAS or UGS. Monopulse technology increases bearing accuracy several folds and radar can be multi-functional, multi-frequency. Fly eye micro-radars are inexpensive, can be expendable. Prototype of sense and avoid radar with two directional antennas has been designed and bench tested.

  10. Radar activities of the DFVLR Institute for Radio Frequency Technology

    Science.gov (United States)

    Keydel, W.

    1983-01-01

    Aerospace research and the respective applications microwave tasks with respect to remote sensing, position finding and communication are discussed. The radar activities are directed at point targets, area targets and volume targets; they center around signature research for earth and ocean remote sensing, target recognition, reconnaissance and camouflage and imaging and area observation radar techniques (SAR and SLAR). The radar activities cover a frequency range from 1 GHz up to 94 GHz. The radar program is oriented to four possible application levels: ground, air, shuttle orbits and satellite orbits. Ground based studies and measurements, airborne scatterometers and imaging radars, a space shuttle radar, the MRSE, and follow on experiments are considered.

  11. Techniques for Radar Imaging Based on MUSIC Algorithm

    Institute of Scientific and Technical Information of China (English)

    1999-01-01

    At first, the radar target scattering centers model and MUSIC algorithm are analyzed in this paper. How to efficiently set the parameters of the MUSIC algorithms is given by a great deal of simulated radar data in experiments. After that, according to measured data from two kinds of plane targets on fully polarized and high range resolution radar system, the author mainly investigated particular utilization of MUSIC algorithm in radar imaging. And two-dimensional radar images are generated for two targets measured in compact range. In the end, a conclusion is drew about the relation of radar target scattering properties and imaging results.

  12. Observation and theory of the radar aurora

    Energy Technology Data Exchange (ETDEWEB)

    Sahr, J.D.

    1990-01-01

    Plasma density irregularities occurring near the Aurora Borealis cause scattering of HF, VHF, and UHF radio waves. Analysis of the resulting radar signal provides great detail about the spatial and temporal characteristics of these auroral E region irregularities. Observations are presented of the radar aurora from recent campaigns in northern Sweden. After reviewing the basic theory and observations of auroral electrojet irregularities, a simple nonlinear fluid theory of electrojet ion-acoustic waves is introduced, and reduced to a form of the three-wave interaction equations. This theory provides a simple mechanism for excitation of linearly stable waves at large aspect and flow angles, as well as a prediction of the power spectra that a coherent scatter radar should observe. In addition, this theory may be able to account for type 3 waves without resorting to ion gyro modes, such as the electrostatic ion-cyclotron wave. During the course of the research a simple new radar transmitting mode and signal processing algorithm was generated which very simply solves a frequency aliasing problem that often occurs in CUPRI auroral radar studies. Several new radar data analysis routines were developed, including the principally cross-beam image and scatter plots of the second versus first moments of the power spectrum of the irregularities. Analysis of vertical interferometer data shows that type 3 waves originate at ordinary electrojet altitudes, not in the upper E region, from which it is concluded that the electrostatic ion-cyclotron mode does not generate type 3 waves. The measured height of type 3 waves and other spectral analyses provide support for the pure ion-acoustic theory of type 3 waves. Suggestions are offered for hardware improvements to the CUPRI radar, new experiments to test new and existing theories.

  13. Federal Weather Radar Stations in the United States as of September 2012

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — These data represent Next-Generation Radar (NEXRAD) and Terminal Doppler Weather Radar (TDWR) weather radar stations within the US. The NEXRAD radar stations are...

  14. Automatic Focusing for a 675 GHz Imaging Radar with Target Standoff Distances from 14 to 34 Meters

    Science.gov (United States)

    Tang, Adrian; Cooper, Ken B.; Dengler, Robert J.; Llombart, Nuria; Siegel, Peter H.

    2013-01-01

    This paper dicusses the issue of limited focal depth for high-resolution imaging radar operating over a wide range of standoff distances. We describe a technique for automatically focusing a THz imaging radar system using translational optics combined with range estimation based on a reduced chirp bandwidth setting. The demonstarted focusing algorithm estimates the correct focal depth for desired targets in the field of view at unknown standoffs and in the presence of clutter to provide good imagery at 14 to 30 meters of standoff.

  15. Optical Heterodyne With Lower Phase Noise

    Science.gov (United States)

    Logan, Ronald T.

    1994-01-01

    Proposed improvement enhances utility of optical-heterodyne apparatus used to generate radio signal at chosen frequency between 1 and 1,000 GHz. Two lasers injection-locked to third, mode-locked laser. Beat-frequency heterodyne output contains much less phase noise if generated from outputs of two independent lasers, and phase-coherent with reference signal. Potential applications include phased-array radar, fiber-optic communication systems, fiber-optic stabilized oscillators, and other applications involving conversions between optical and millimeter-wave signals.

  16. Use of Synthetic Aperture Radar in Cold Climate Flood Response

    Science.gov (United States)

    Yarbrough, L. D.

    2009-12-01

    The purpose of this study was to investigate the usefulness of Synthetic Aperture Radar (SAR) satellite images during a cold climate disaster response event. There were 15 European Space Agency (ESA) Advanced Synthetic Aperture Radar ASAR scenes, five Japan Aerospace Exploration Agency (JAXA) Phased Array type L-band Synthetic Aperture Radar (PALSAR) scenes, one RADARSAT2 scene, and numerous optical sensor data. These data were primarily used to indentify floodwater inundation polygons and flow vectors. However, in cold climate flooding, there are complicating factors such as frazil ice, ice jams, and snow-covered, frozen flood waters that are not present during warmer flooding events. The imagery was obtained through the International Charter "Space and Major Disasters.” The Charter aims at providing a unified system of space data acquisition and delivery to those affected by natural or man-made disasters through Authorized Users. Each member agency has committed resources to support the provisions of the Charter, and thus is helping to mitigate the effects of disasters on human life and property. On 25 March 2009, the Charter was activated in response to the flooding along the Red River of the North in the states of North Dakota and Minnesota of the United States. The delivery time of a single SAR scene from a Charter participant was less than 12 hours from the time of acquisition. This expedited service allowed additional time for creating image-based derivations, field checking and delivery to a decision maker or emergency responder. SAR-derived data sets include identification of river ice and saturated ground conditions. This data could be provided to experts in river ice engineering for use in the development of plans to reduce ice jamming, its effect on water levels and additional stresses on river infrastructure. During disaster response applications, SAR data was found to very useful in indentifying open water and the front of ice jams. Using a river

  17. Terrestrial Radar Interferometer Observations of a Rapid Landslide Over Vegetated Terrain

    Science.gov (United States)

    Werner, C. L.; Caduff, R.; Strozzi, T.; Wegmüller, U.

    2013-12-01

    In the Spring of 2013 a landslide in the Hintergraben region of canton Obwalden in Switzerland showed a rapid increase in velocity. Hintergraben, at an elevation of about 900 meters is characterized by meadow and some trees. A region approximately 200 meters wide and 500 meters long was affected. Starting in February, the velocity increased to 30 cm/day by 1-May and continued to accelerate by deceleration to 8 cm/day by 27-May. We report on observations of this landslide using the Gamma Portable Radar Interferometer (GPRI). The GPRI is an FM-CW radar operating at 17.2 GHz (Ku-Band) with an operational range up to 10 km. Range resolution is 90 cm along the LOS. The instrument operates in real-aperture mode with 0.4 degree wide fan-beam giving an azimuth resolution better than 7 meters at 1 kilometer range. During data acquisition, the radar performed an azimuth scan of the scene at a rate of 5 degrees/sec. The radar is phase coherent and capable of acquiring data suitable for differential interferometry with a precision for measuring changes in the LOS distance > 0.1 mm. Limiting factors in the accuracy of LOS motion are interferometric phase coherence and variations in delay due to water vapor. The GPRI was deployed to map ground motion for 2 campaigns on 6 May and 26-27 May 2013. The radar position over 3.5 km from the landslide on the opposite side of Lake Sarnen. Due to rapid temporal decorrelation at Ku-Band data, acquisitions were made at 1 minute intervals. The GPRI deformation maps cover almost the entire region of the active landslide during both observation periods of 6 hours on 6 May and 9 hours on 26-27 May. Measured peak velocities were 35 and 8 cm/day respectively. Point-wise verification of the radar observations was carried out using a Leica TCR803 total station with an estimated accuracy of 1/2 mm at 3.5 km distance. A set of optical corner cubes and radar reflectors were set up in the region of the landslide on 26-May. The radar deformation

  18. Ultra-Wideband Radars for Measurements over Land and Sea Ice

    Science.gov (United States)

    Gogineni, S.; Hale, R.; Miller, H. G.; Yan, S.; Rodriguez-Morales, F.; Leuschen, C.; Wang, Z.; Gomez-Garcia, D.; Binder, T.; Steinhage, D.; Gehrmann, M.; Braaten, D. A.

    2015-12-01

    We developed two ultra-wideband (UWB) radars for measurements over the ice sheets in Greenland and Antarctica and sea ice. One of the UWB radars operates over a 150-600 MHz frequency range with a large, cross-track 24-element array. It is designed to sound ice, image the ice-bed interface, and map internal layers with fine resolution. The 24-element array consists of three 8-element sub-arrays. One of these sub-arrays is mounted under the fuselage of a BT-67 aircraft; the other two are mounted under the wings. The polarization of each antenna element can be individually reconfigured depending on the target of interest. The measured inflight VSWR is less than 2 over the operating range. The fuselage sub-array is used both for transmission and reception, and the wing-mounted sub-arrays are used for reception. The transmitter consists of an 8-channel digital waveform generator to synthesize chirped pulses of selectable pulse width, duration, and bandwidth. It also consists of drivers and power amplifiers to increase the power level of each individual channel to about 1 kW and a fast high-power transmit/receive switch. Each receiver consists of a limiter, switches, low-noise and driver amplifiers, and filters to shape and amplify received signals to the level required for digitization. The digital sub-section consists of timing and control sub-systems and 24 14-bit A/D converters to digitize received signals at a rate of 1.6 GSPS. The radar performance is evaluated using an optical delay line to simulate returns from about 2 km thick ice, and the measured radar loop sensitivity is about 215 dB. The other UWB microwave radar operates over a 2-18 GHz frequency range in Frequency-Modulated Continuous Wave (FM-CW) mode. It is designed to sound more than 1 m of snow over sea ice and map internal layers to a depth about 25-40 m in polar firn and ice. We operated the microwave radar over snow-covered sea ice and mapped snow as thin as 5 cm and as thick as 60 cm. We mapped

  19. An RF tag communication system model for noise radar

    Science.gov (United States)

    Pan, Qihe; Narayanan, Ram M.

    2008-04-01

    RF (radio-frequency) tags have drawn increasing research interest because of their great potential uses in many radio frequency identification applications. They can also be configured to work with radar as a communication channel by receiving radar acquisition signals, suitably coding these, and retransmitting them back to the radar. This paper proposes a system model for the communication between a noise radar and multiple RF tags. The radar interrogates the RF tags in a region of interest by sending ultrawideband noise signals. Upon receiving the radar's signal, all the tags within the radar's range wake up, and respond to the radar with simple messages. The RF tag filters the radar signal to a unique spectral band, which represents its identification information, and different RF tags occupy different non-overlapping bands of the spectrum of the radar signal. Tag messages are modulated onto the waveform through taps of weighted delays. The radar decodes the RF tag identifications and corresponding messages by cross-correlating the RF tag returned signals with the replica of the radar transmitted signal. Calculations and simulation results both show that the proposed system is capable of communicating simple messages between RF tags and radar.

  20. Atmospheric and Fog Effects on Ultra-Wide Band Radar Operating at Extremely High Frequencies.

    Science.gov (United States)

    Balal, Nezah; Pinhasi, Gad A; Pinhasi, Yosef

    2016-05-23

    The wide band at extremely high frequencies (EHF) above 30 GHz is applicable for high resolution directive radars, resolving the lack of free frequency bands within the lower part of the electromagnetic spectrum. Utilization of ultra-wideband signals in this EHF band is of interest, since it covers a relatively large spectrum, which is free of users, resulting in better resolution in both the longitudinal and transverse dimensions. Noting that frequencies in the millimeter band are subjected to high atmospheric attenuation and dispersion effects, a study of the degradation in the accuracy and resolution is presented. The fact that solid-state millimeter and sub-millimeter radiation sources are producing low power, the method of continuous-wave wideband frequency modulation becomes the natural technique for remote sensing and detection. Millimeter wave radars are used as complementary sensors for the detection of small radar cross-section objects under bad weather conditions, when small objects cannot be seen by optical cameras and infrared detectors. Theoretical analysis for the propagation of a wide "chirped" Frequency-Modulated Continuous-Wave (FMCW) radar signal in a dielectric medium is presented. It is shown that the frequency-dependent (complex) refractivity of the atmospheric medium causes distortions in the phase of the reflected signal, introducing noticeable errors in the longitudinal distance estimations, and at some frequencies may also degrade the resolution.

  1. Simulation of radar sounder echo from lunar surface and subsurface structure

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    Space-borne high frequency (HF) radar sounder is an effective tool for investigation of lunar subsurface structure in lunar exploration. The primary strategy of radar sounder technology for subsurface structure detection is utilization of the nadir echoes time delay and intensity difference from the lunar surface and subsurface. It is important to fully understand electromagnetic wave propagation, scattering, and attenuation through the lunar media in order to retrieve information of lunar layering structure from weak nadir echoes of the subsurface, which is simultaneously interfered by strong off-nadir surface clutters. Based on the Kirchhoff approximation (KA) of rough surface scattering and the ray tracing of geometric optics, a numerical simulation of radar echoes from lunar layering structures is developed. According to the lunar surface feature, the topography of mare and highland surfaces is numerically generated, and the triangulated network is employed to make digital elevations of the whole lunar surface. Scattering from the lunar surface and subsurface is numerically calculated using KA approach. Radar echoes and its range images are numerically simulated, and their dependence on the parameters of lunar layering interfaces is discussed. The approach of this paper can also be utilized to investigate subsurface structures in Mars and other planetary exploration.

  2. A simulation-based approach towards automatic target recognition of high resolution space borne radar signatures

    Science.gov (United States)

    Anglberger, H.; Kempf, T.

    2016-10-01

    Specific imaging effects that are caused mainly by the range measurement principle of a radar device, its much lower frequency range as compared to the optical spectrum, the slanted imaging geometry and certainly the limited spatial resolution complicates the interpretation of radar signatures decisively. Especially the coherent image formation which causes unwanted speckle noise aggravates the problem of visually recognizing target objects. Fully automatic approaches with acceptable false alarm rates are therefore an even harder challenge. At the Microwaves and Radar Institute of the German Aerospace Center (DLR) the development of methods to implement a robust overall processing workflow for automatic target recognition (ATR) out of high resolution synthetic aperture radar (SAR) image data is under progress. The heart of the general approach is to use time series exploitation for the former detection step and simulation-based signature matching for the subsequent recognition. This paper will show the overall ATR chain as a proof of concept for the special case of airplane recognition on image data from the space borne SAR sensor TerraSAR-X.

  3. Ground penetrating radar for asparagus detection

    Science.gov (United States)

    Seyfried, Daniel; Schoebel, Joerg

    2016-03-01

    Ground penetrating radar is a promising technique for detection of buried objects. Recently, radar has more and more been identified to provide benefits for a plurality of applications, where it can increase efficiency of operation. One of these fields is the industrial automatic harvesting process of asparagus, which is performed so far by cutting the soil ridge at a certain height including all the asparagus spears and subsequently sieving the latter out of the soil. However, the height where the soil is cut is a critical parameter, since a wrong value leads to either damage of the roots of the asparagus plants or to a reduced crop yield as a consequence of too much biomass remaining in the soil. In this paper we present a new approach which utilizes ground penetrating radar for non-invasive sensing in order to obtain information on the optimal height for cutting the soil. Hence, asparagus spears of maximal length can be obtained, while keeping the roots at the same time undamaged. We describe our radar system as well as the subsequent digital signal processing steps utilized for extracting the information required from the recorded radar data, which then can be fed into some harvesting unit for setting up the optimal cutting height.

  4. Urban Flood Warning Systems using Radar Technologies

    Science.gov (United States)

    Fang, N.; Bedient, P. B.

    2013-12-01

    There have been an increasing number of urban areas that rely on weather radars to provide accurate precipitation information for flood warning purposes. As non-structural tools, radar-based flood warning systems can provide accurate and timely warnings to the public and private entities in urban areas that are prone to flash floods. The wider spatial and temporal coverage from radar increases flood warning lead-time when compared to rain and stream gages alone. The Third Generation Rice and Texas Medical Center (TMC) Flood Alert System (FAS3) has been delivering warning information with 2 to 3 hours of lead time and a R2 value of 93% to facility personnel in a readily understood format for more than 50 events in the past 15 years. The current FAS utilizes NEXRAD Level II radar rainfall data coupled with a real-time hydrologic model (RTHEC-1) to deliver warning information. The system has a user-friendly dashboard to provide rainfall maps, Google Maps based inundation maps, hydrologic predictions, and real-time monitoring at the bayou. This paper will evaluate its reliable performance during the recent events occurring in 2012 and 2013 and the development of a similar radar-based flood warning system for the City of Sugar Land, Texas. Having a significant role in the communication of flood information, FAS marks an important step towards the establishment of an operational and reliable flood warning system for flood-prone urban areas.

  5. Cognitive nonlinear radar test-bed

    Science.gov (United States)

    Hedden, Abigail S.; Wikner, David A.; Martone, Anthony; McNamara, David

    2013-05-01

    Providing situational awareness to the warfighter requires radar, communications, and other electronic systems that operate in increasingly cluttered and dynamic electromagnetic environments. There is a growing need for cognitive RF systems that are capable of monitoring, adapting to, and learning from their environments in order to maintain their effectiveness and functionality. Additionally, radar systems are needed that are capable of adapting to an increased number of targets of interest. Cognitive nonlinear radar may offer critical solutions to these growing problems. This work focuses on ongoing efforts at the U.S. Army Research Laboratory (ARL) to develop a cognitive nonlinear radar test-bed. ARL is working toward developing a test-bed that uses spectrum sensing to monitor the RF environment and dynamically change the transmit waveforms to achieve detection of nonlinear targets with high confidence. This work presents the architecture of the test-bed system along with a discussion of its current capabilities and limitations. A brief outlook is presented for the project along with a discussion of a future cognitive nonlinear radar test-bed.

  6. A new electro-optic waveguide architecture and the unprecedented devices it enables

    Science.gov (United States)

    Davis, Scott R.; Rommel, Scott D.; Farca, George; Anderson, Michael H.

    2008-04-01

    A new electro-optic waveguide platform, which provides unprecedented electro-optical phase delays (> 1mm), with very low loss (integrated photonic architecture has applications in a wide array of commercial and defense markets including: remote sensing, micro-LADAR, OCT, laser illumination, phased array radar, optical communications, etc. Performance attributes of several example devices are presented.

  7. Operational Bright-Band Snow Level Detection Using Doppler Radar

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — A method to detect the bright-band snow level from radar reflectivity and Doppler vertical velocity data collection with an atmospheric profiling Doppler radar. The...

  8. Stepped-frequency radar sensors theory, analysis and design

    CERN Document Server

    Nguyen, Cam

    2016-01-01

    This book presents the theory, analysis and design of microwave stepped-frequency radar sensors. Stepped-frequency radar sensors are attractive for various sensing applications that require fine resolution. The book consists of five chapters. The first chapter describes the fundamentals of radar sensors including applications followed by a review of ultra-wideband pulsed, frequency-modulated continuous-wave (FMCW), and stepped-frequency radar sensors. The second chapter discusses a general analysis of radar sensors including wave propagation in media and scattering on targets, as well as the radar equation. The third chapter addresses the analysis of stepped-frequency radar sensors including their principles and design parameters. Chapter 4 presents the development of two stepped-frequency radar sensors at microwave and millimeter-wave frequencies based on microwave integrated circuits (MICs), microwave monolithic integrated circuits (MMICs) and printed-circuit antennas, and discusses their signal processing....

  9. Stellwagen Bank National Marine Sanctuary - Synthetic Aperture Radar (SAR) Imagery

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This geodatabase contains Synthetic Aperture Radar images (SAR), which consist of a fine resolution (12.5-50m), two-dimensional radar backscatter map of the...

  10. Detection of small, slow ground targets using Synthetic Aperture Radar

    Science.gov (United States)

    Chen, Curtis; Chapin, Elaine; Rosen, Paul

    2005-01-01

    Synthetic aperture radar (SAR) along-track interferometry (ATI) is a technique for sensing Earth-surface motion. The technique involves interferometrically combining data from two radar images acquired from phase centers separated along the platform flight track.

  11. Ships as salient objects in synthetic aperture radar imaginary

    CSIR Research Space (South Africa)

    Schwegmann, Colin P

    2016-07-01

    Full Text Available The widespread access to Synthetic Aperture Radar data has created a need for more precise ship extraction, specifically in low-to-medium resolution imagery. While Synthetic Aperture Radar pixel resolution is improving for a large swaths...

  12. NOAA Next Generation Radar (NEXRAD) Level III Products

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This dataset consists of Level III weather radar products collected from Next-Generation Radar (NEXRAD) stations located in the contiguous United States, Alaska,...

  13. NOAA Next Generation Radar (NEXRAD) Level II Base Data

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This dataset consists of Level II weather radar data collected from Next-Generation Radar (NEXRAD) stations located in the contiguous United States, Alaska, Hawaii,...

  14. Snow monitoring using microwave radars

    OpenAIRE

    Koskinen, Jarkko

    2001-01-01

    Remote sensing has proven its usefulness in various applications. For mapping, land-use classification and forest monitoring optical satellite and airborne images are used operationally. However, this is not the case with snow monitoring. Currently only ground-based in situ and weather measurements are used operationally for snow monitoring in Finland. Ground measurements are conducted once a month on special snow courses. These measurements are used to update the hydrological model that simu...

  15. Ocean wave imaging mechanism by imaging radar

    Institute of Scientific and Technical Information of China (English)

    何宜军

    2000-01-01

    Analytical representations of the high frequency spectra of ocean wave and its variation due to the variation of ocean surface current are derived from the wave-number spectrum balance equation. The ocean surface imaging formulation of real aperture radar (RAR) is given using electromagnetic wave backscattering theory of ocean surface and the modulations of ocean surface winds, currents and their variations to RAR are described. A general representation of the phase modulation induced by the ocean surface motion is derived according to standard synthetic aperture radar (SAR) imaging theory. The detectability of ocean current and sea bottom topography by imaging radar is discussed. The results constitute the theoretical basis for detecting ocean wave fields, ocean surface winds, ocean surface current fields, sea bottom topography, internal wave and so on.

  16. Updating river basin models with radar altimetry

    DEFF Research Database (Denmark)

    Michailovsky, Claire Irene B.

    response of a catchment to meteorological forcing. While river discharge cannot be directly measured from space, radar altimetry (RA) can measure water level variations in rivers at the locations where the satellite ground track and river network intersect called virtual stations or VS. In this PhD study...... been between 10 and 35 days for altimetry missions until now. The location of the VS is also not necessarily the point at which measurements are needed. On the other hand, one of the main strengths of the dataset is its availability in near-real time. These characteristics make radar altimetry ideally...... suited for use in data assimilation frameworks which combine the information content from models and current observations to produce improved forecasts and reduce prediction uncertainty. The focus of the second and third papers of this thesis was therefore the use of radar altimetry as update data...

  17. Array Processing for Radar: Achievements and Challenges

    Directory of Open Access Journals (Sweden)

    Ulrich Nickel

    2013-01-01

    Full Text Available Array processing for radar is well established in the literature, but only few of these algorithms have been implemented in real systems. The reason may be that the impact of these algorithms on the overall system must be well understood. For a successful implementation of array processing methods exploiting the full potential, the desired radar task has to be considered and all processing necessary for this task has to be eventually adapted. In this tutorial paper, we point out several viewpoints which are relevant in this context: the restrictions and the potential provided by different array configurations, the predictability of the transmission function of the array, the constraints for adaptive beamforming, the inclusion of monopulse, detection and tracking into the adaptive beamforming concept, and the assessment of superresolution methods with respect to their application in a radar system. The problems and achieved results are illustrated by examples from previous publications.

  18. MU radar measurements of orbital debris

    Science.gov (United States)

    Sato, Toru; Kayama, Hidetoshi; Furusawa, Akira; Kimura, Iwane

    1990-04-01

    Distributions of orbital debris versus height and scattering cross section are determined from a series of observations made with a high-power VHF Doppler radar (MU radar) of Japan. An automated data processing algorithm has been developed to discriminate echoes of orbiting objects from those of undesired signals such as meteor trail echoes or lightning atmospherics. Although the results are preliminary, they showed good agreement with those from NORAD tracking radar observations using a much higher frequency. It is found that the collision frequency of a Space Station of 1 km x 1 km size at an altitude of 500 km with orbiting debris is expected to be as high as once per two years.

  19. Digital Receiver for Laser Imaging Radar

    Institute of Scientific and Technical Information of China (English)

    WANG Wei Ran; SUN Bing

    2004-01-01

    With the extension of the application domains for laser imaging radar,it is necessary to find a new technical way to obtain high technical performance and adaptive ability.In this paper,A new concept of digital receiver of laser imaging radar system is presented.This digital receiver is defined as a time varying parameter receiver which possesses large dynamics region and time domain filter.The receiver's mode,component structure as well as every function of its processing are described.The results and laboratorial data show the feasibility of digital reception.Also,it can exploit the inherent nature of laser imaging radar to obtain high probability of detection.

  20. Comments on airborne ISR radar utilization

    Science.gov (United States)

    Doerry, A. W.

    2016-05-01

    A sensor/payload operator for modern multi-sensor multi-mode Intelligence, Surveillance, and Reconnaissance (ISR) platforms is often confronted with a plethora of options in sensors and sensor modes. This often leads an over-worked operator to down-select to favorite sensors and modes; for example a justifiably favorite Full Motion Video (FMV) sensor at the expense of radar modes, even if radar modes can offer unique and advantageous information. At best, sensors might be used in a serial monogamous fashion with some cross-cueing. The challenge is then to increase the utilization of the radar modes in a manner attractive to the sensor/payload operator. We propose that this is best accomplished by combining sensor modes and displays into `super-modes'.

  1. Magellan: radar performance and data products.

    Science.gov (United States)

    Pettengill, G H; Ford, P G; Johnson, W T; Raney, R K; Soderblom, L A

    1991-04-12

    The Magellan Venus orbiter carries only one scientific instrument: a 12.6-centimeter wavelength radar system shared among three data-taking modes. The synthetic-aperture mode images radar echoes from the Venus surface at a resolution of between 120 and 300 meters, depending on spacecraft altitude. In the altimetric mode, relative height measurement accuracies may approach 5 meters, depending on the terrain's roughness, although orbital uncertainties place a floor of about 50 meters on the absolute uncertainty. In areas of extremely rough topography, accuracy is limited by the inherent line-of-sight radar resolution of about 88 meters. The maximum elevation observed to date, corresponding to a planetary radius of 6062 kilometers, lies within Maxwell Mons. When used as a thermal emission radiometer, the system can determine surface emissivities to an absolute accuracy of about 0.02. Mosaicked and archival digital data products will be released in compact disk (CDROM) format.

  2. Analytic radar micro-Doppler signatures classification

    Science.gov (United States)

    Oh, Beom-Seok; Gu, Zhaoning; Wang, Guan; Toh, Kar-Ann; Lin, Zhiping

    2017-06-01

    Due to its capability of capturing the kinematic properties of a target object, radar micro-Doppler signatures (m-DS) play an important role in radar target classification. This is particularly evident from the remarkable number of research papers published every year on m-DS for various applications. However, most of these works rely on the support vector machine (SVM) for target classification. It is well known that training an SVM is computationally expensive due to its nature of search to locate the supporting vectors. In this paper, the classifier learning problem is addressed by a total error rate (TER) minimization where an analytic solution is available. This largely reduces the search time in the learning phase. The analytically obtained TER solution is globally optimal with respect to the classification total error count rate. Moreover, our empirical results show that TER outperforms SVM in terms of classification accuracy and computational efficiency on a five-category radar classification problem.

  3. Plasma-based radar cross section reduction

    CERN Document Server

    Singh, Hema; Jha, Rakesh Mohan

    2016-01-01

    This book presents a comprehensive review of plasma-based stealth, covering the basics, methods, parametric analysis, and challenges towards the realization of the idea. The concealment of aircraft from radar sources, or stealth, is achieved through shaping, radar absorbing coatings, engineered materials, or plasma, etc. Plasma-based stealth is a radar cross section (RCS) reduction technique associated with the reflection and absorption of incident electromagnetic (EM) waves by the plasma layer surrounding the structure. A plasma cloud covering the aircraft may give rise to other signatures such as thermal, acoustic, infrared, or visual. Thus it is a matter of concern that the RCS reduction by plasma enhances its detectability due to other signatures. This needs a careful approach towards the plasma generation and its EM wave interaction. The book starts with the basics of EM wave interactions with plasma, briefly discuss the methods used to analyze the propagation characteristics of plasma, and its generatio...

  4. Automotive radar - investigation of mutual interference mechanisms

    Science.gov (United States)

    Goppelt, M.; Blöcher, H.-L.; Menzel, W.

    2010-09-01

    In the past mutual interference between automotive radar sensors has not been regarded as a major problem. With an increasing number of such systems, however, this topic is receiving more and more attention. The investigation of mutual interference and countermeasures is therefore one topic of the joint project "Radar on Chip for Cars" (RoCC) funded by the German Federal Ministry of Education and Research (BMBF). RoCC's goal is to pave the way for the development of high-performance, low-cost 79 GHz radar sensors based on Silicon-Germanium (SiGe) Monolithic Microwave Integrated Circuits (MMICs). This paper will present some generic interference scenarios and report on the current status of the analysis of interference mechanisms.

  5. Magellan: Radar performance and data products

    Science.gov (United States)

    Pettengill, G.H.; Ford, P.G.; Johnson, W.T.K.; Raney, R.K.; Soderblom, L.A.

    1991-01-01

    The Magellan Venus orbiter carries only one scientific instrument: a 12.6-centimeter-wavelength radar system shared among three data-taking modes. The syntheticaperture mode images radar echoes from the Venus surface at a resolution of between 120 and 300 meters, depending on spacecraft altitude. In the altimetric mode, relative height measurement accuracies may approach 5 meters, depending on the terrain's roughness, although orbital uncertainties place a floor of about 50 meters on the absolute uncertainty. In areas of extremely rough topography, accuracy is limited by the inherent line-of-sight radar resolution of about 88 meters. The maximum elevation observed to date, corresponding to a planetary radius of 6062 kilometers, lies within Maxwell Mons. When used as a thermal emission radiometer, the system can determine surface emissivities to an absolute accuracy of about 0.02. Mosaicked and archival digital data products will be released in compact disk (CDROM) format.

  6. Classification of Target Buried in the Underground by Radar Polarimetry

    OpenAIRE

    Moriyama, Toshifumi; Nakamura, Masafumi; Yamaguchi, Yoshio; Yamada, Hiroyoshi; Boerner, Wolfgang-M.

    1999-01-01

    This paper discusses the classification of targets buried in the underground by radar polarimetry. The subsurface radar is used for the detection of objects buried beneath the ground surface, such as gas pipes, cables and cavities, or in archeological exploration operation. In addition to target echo, the subsurface radar receives various other echoes, because the underground is inhomogeneous medium. Therefore, the subsurface radar needs to distinguish these echoes. In order to enhance the di...

  7. A Short Range, High Accuracy Radar Ranging System,

    Science.gov (United States)

    1984-12-01

    radar cross section of a triangular trihedral reflector can be calculated using a= 4ni (0.289 L) 2 2 (5) r, where L, is the length of the...imaximum radar cross section of 16.1 square meters. Alignment of the axis of the corner reflector was done visually: since triangular corner reflectors ...As the aircraft flies its motion causes the radar cross section of each of the many scatterers to fluctuate. If the radar

  8. THE SYSTEM SIMULATION OF THREE-DIMENSIONAL RADAR

    Institute of Scientific and Technical Information of China (English)

    Zhang Wei; Xiang Jingcheng; Wang Xuegang

    2004-01-01

    To provide a test platform for Electronic Warfare (EW) system, it is needed to simulate the radar received Intermediate Frequency (IF) signals and radar system functions.This letter gives a description of a radar system simulation software developed for frequencyphase scanning three-dimensional (3-D) radar. Experimental results prove that the software could be used for system evaluation and for training purposes as an attractive alternative to real EW system.

  9. IF signals simulation of three-dimensional radar

    Institute of Scientific and Technical Information of China (English)

    Zhang Wei; Wang Xuegang; Zhu Zhaoda

    2008-01-01

    Based on the analysis of the principles of frequency-phase scanning 3-D (three-dimensional) radar and the scattering mechanism of 3-D radar, the target and clutter IF (intermediate frequency) signals model of frequencyphase scanning 3-D radar is presented. The IF signals model of different channels of 3-D radar is presented in one simple formula in which complex waveform effects are considered. The simulation results obtained during tests are also provided in the end.

  10. Bibliography, Background and Overview of UWB radar sensor

    OpenAIRE

    2014-01-01

    Due to the lack of studies in the literature that address the issue of UWB radar sensors, and also because of the great importance of this technology, which is gaining heavily in new application areas, such as the process industry and automotive engineering. A brief summary of the biography of UWB radar sensors have been treated and presented in this article, specifying the difference between pulsed radar sensors regarding CW radar sensor, and two subcategories SFCW FMCW, and highlight the be...

  11. Bibliography, Background and Overview of UWB radar sensor

    OpenAIRE

    2014-01-01

    Due to the lack of studies in the literature that address the issue of UWB radar sensors, and also because of the great importance of this technology, which is gaining heavily in new application areas, such as the process industry and automotive engineering. A brief summary of the biography of UWB radar sensors have been treated and presented in this article, specifying the difference between pulsed radar sensors regarding CW radar sensor, and two subcategories SFCW FMCW, and high...

  12. Comparison of Image Processing Techniques using Random Noise Radar

    Science.gov (United States)

    2014-03-27

    pseudo - random noise . The noise waveforms employed by the radar systems 9 are generally white and Gaussian, that is, the waveform’s power...2010. [5] Hardin, Joshua A. “Information Encoding on a Pseudo Random Noise Radar Waveform”, 2013. [6] Jackson, Julie A. “EENG 668/714 Advanced Radar ...COMPARISON OF IMAGE PROCESSING TECHNIQUES USING RANDOM NOISE RADAR THESIS Jesse Robert B. Cruz, Capt, USAF AFIT-ENG-14-M-22 DEPARTMENT OF THE

  13. Space Radar Image of Central Sumatra, Indonesia

    Science.gov (United States)

    1994-01-01

    This is a radar image of the central part of the island of Sumatra in Indonesia that shows how the tropical rainforest typical of this country is being impacted by human activity. Native forest appears in green in this image, while prominent pink areas represent places where the native forest has been cleared. The large rectangular areas have been cleared for palm oil plantations. The bright pink zones are areas that have been cleared since 1989, while the dark pink zones are areas that were cleared before 1989. These radar data were processed as part of an effort to assist oil and gas companies working in the area to assess the environmental impact of both their drilling operations and the activities of the local population. Radar images are useful in these areas because heavy cloud cover and the persistent smoke and haze associated with deforestation have prevented usable visible-light imagery from being acquired since 1989. The dark shapes in the upper right (northeast) corner of the image are a chain of lakes in flat coastal marshes. This image was acquired in October 1994 by the Spaceborne Imaging Radar C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) onboard the space shuttle Endeavour. Environmental changes can be easily documented by comparing this image with visible-light data that were acquired in previous years by the Landsat satellite. The image is centered at 0.9 degrees north latitude and 101.3 degrees east longitude. The area shown is 50 kilometers by 100 kilometers (31 miles by 62 miles). The colors in the image are assigned to different frequencies and polarizations of the radar as follows: red is L-band horizontally transmitted, horizontally received; green is L-band horizontally transmitted, vertically received; blue is L-band vertically transmitted, vertically received. SIR-C/X-SAR, a joint mission of the German, Italian and United States space agencies, is part of NASA's Mission to Planet Earth program.

  14. Space Radar Image of Central Sumatra, Indonesia

    Science.gov (United States)

    1994-01-01

    This is a radar image of the central part of the island of Sumatra in Indonesia that shows how the tropical rainforest typical of this country is being impacted by human activity. Native forest appears in green in this image, while prominent pink areas represent places where the native forest has been cleared. The large rectangular areas have been cleared for palm oil plantations. The bright pink zones are areas that have been cleared since 1989, while the dark pink zones are areas that were cleared before 1989. These radar data were processed as part of an effort to assist oil and gas companies working in the area to assess the environmental impact of both their drilling operations and the activities of the local population. Radar images are useful in these areas because heavy cloud cover and the persistent smoke and haze associated with deforestation have prevented usable visible-light imagery from being acquired since 1989. The dark shapes in the upper right (northeast) corner of the image are a chain of lakes in flat coastal marshes. This image was acquired in October 1994 by the Spaceborne Imaging Radar C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) onboard the space shuttle Endeavour. Environmental changes can be easily documented by comparing this image with visible-light data that were acquired in previous years by the Landsat satellite. The image is centered at 0.9 degrees north latitude and 101.3 degrees east longitude. The area shown is 50 kilometers by 100 kilometers (31 miles by 62 miles). The colors in the image are assigned to different frequencies and polarizations of the radar as follows: red is L-band horizontally transmitted, horizontally received; green is L-band horizontally transmitted, vertically received; blue is L-band vertically transmitted, vertically received. SIR-C/X-SAR, a joint mission of the German, Italian and United States space agencies, is part of NASA's Mission to Planet Earth program.

  15. Block floating point for radar data

    DEFF Research Database (Denmark)

    Christensen, Erik Lintz

    1999-01-01

    Integer, floating point, and block floating point (BFP) data formats are analyzed and compared in order to establish the mathematical tools for selection of an optimal format which fulfils the demands of high resolution radar (SAR) data to large dynamic range and adequate S/N. The analysis takes...... quantization noise and saturation distortion into account and concludes that it is preferred to use small blocks and a (new) modified BFP format applying fractional exponents. Data from the EMISAR radar system are applied to illustrate the merits of the different schemes....

  16. FMCW Radar Jamming Techniques and Analysis

    Science.gov (United States)

    2013-09-01

    Hz (2.19) The beat frequency for the 1st and 2nd section is then f 𔃻b = 2R!F ’ cto " 2V # (2.20) and f 𔃼b = 2R!F ’ cto + 2V " (2.21) with...both beat frequencies calculated, the target range can be computed as 16 R = cto 4!F ’ ( f 𔃻b+ f 𔃼b ) m (2.22) and the target’s range rate is...Australia, 2004, pp. 167–172. [9] Lab-Volt (Quebec) Ltd., Principles of Radar Systems Student Manual . Telecommunications Radar, 2006. [10] O. C

  17. Micropower radar systems for law enforcement technology

    Energy Technology Data Exchange (ETDEWEB)

    Azevedo, S.G.; Mast, J.; Brase, J. [Lawrence Livermore National Lab., CA (United States)] [and others

    1994-11-15

    LLNL researchers have pioneered a unique compact low-power and inexpensive radar technology (microradar) that has enormous potential in various industries. Some licenses are currently in place for motion sensors and stud finders. The ultra-wideband characteristics of the microradar (4 to 10 GHz) make it difficult to detect, yet provide potential range resolution of 1 cm at ranges of greater than 20 meters. Real and synthetic apertures arrays of radar elements can address imaging applications behind walls at those distances. Personnel detection applications are currently being tested.

  18. A new approach to lightweight radar altimeters

    Science.gov (United States)

    Levanon, N.; Stremler, F. G.; Suomi, V. E.

    1974-01-01

    Test results and key principles are given for a radar altimeter designed for meteorological balloons. The instrument, which weighs 160 g and consumes 0.7 W, will fill a gap in meteorological sensing using balloons - an area where pressure altitude was formerly the prevailing reference. The instrument is basically a delay-lock radar utilizing a superregenerative RF stage. Long-term absolute accuracy of plus or minus 10 m and short-term stability of better than 2 m rms were measured at altitudes of 20 km.

  19. Soil-penetrating synthetic aperture radar

    Energy Technology Data Exchange (ETDEWEB)

    Boverie, B.; Brock, B.C.; Doerry, A.W.

    1994-12-01

    This report summarizes the results for the first year of a two year Laboratory Directed Research and Development (LDRD) effort. This effort included a system study, preliminary data acquisition, and preliminary algorithm development. The system study determined the optimum frequency and bandwidth, surveyed soil parameters and targets, and defined radar cross section in lossy media. The data acquisition imaged buried objects with a rail-SAR. Algorithm development included a radar echo model, three-dimensional processing, sidelobe optimization, phase history data interpolation, and clutter estimation/cancellation.

  20. Ice measurements by Geosat radar altimetry

    Science.gov (United States)

    Zwally, H. Jay; Bindschadler, Robert A.; Major, Judy A.; Brenner, Anita C.

    1987-01-01

    Radar altimetry for ice-covered ocean and land is more complex and variable than open ocean radar altimetry; attention is presently given to Geosat ice-sheet topography for the Greenland and Antarctic ice sheets between 72 deg N and 72 deg S which owes its excellent accuracy to the well separated spacing of the orbital tracks and an 18-month geodetic mission duration. A surface elevation map of southern Greenland, produced from 110 days of retracked Geosat data, is presented in color-coded three-dimensional perspective. Comparisons are made between Seasat and Geosat data for ice mass elevations in Greenland.