WorldWideScience

Sample records for optical absorption cross

  1. Segregation during crystal growth from melt and absorption cross section determination by optical absorption method

    Institute of Scientific and Technical Information of China (English)

    ZHANG QingLi; YIN ShaoTang; SUN DunLu; WAN SongMing

    2008-01-01

    Segregation during crystal growth from melt under two conditions is studied by using crystal mass, which can be measured easily, as an independent variable, and a method to determine the effective segregation coefficient and absorption cross section of optical dopant is given. When the segregated solute disperses into the whole or just a part of melt homogenously, the concentration Cs in solid interface will change by different formulas. If the crystal growth interface is conical and segregated solute disperses into melt in total or part, the solute concentration at r=2/3R, where r is the distance from the growth cross section center and R the crystal radius, is independent on the shape of the crystal growth interface, and its variation at r=2/3R can be regarded as the result from crystal growth in flat interface. With Cs variation formula in solid and absorption cross section σ for optical dopant, the absorption coefficients along the crystal growth direction can be calculated, and the corresponding experimental value can be obtained through the crystal optical absorption spectra. By minimizing the half sum, whose independent variables are k, △W or σ, of the difference square between the calculated and experimental absorp-tion coefficients from one or more absorption peaks along the crystal growth di-rection, k and σ, or k and △W, can be determined at the same time through the Levenberg-Marquardt iteration method. Finally, the effective segregation coefficient k, △W and absorption cross sections of Nd:GGG were determined, the results fitted by two formula gave more closed effective segregation coefficient, and the value △W also indicates that the segregated dopant had nearly dispersed into the whole melt. Experimental results show that the method to determine effective segregation coefficient k, △W and absorption cross sections σ is convenient and reliable, and the two segregation formulas can describe the segregation during the crystal growth from

  2. Segregation during crystal growth from melt and absorption cross section determination by optical absorption method

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Segregation during crystal growth from melt under two conditions is studied by using crystal mass,which can be measured easily,as an independent variable,and a method to determine the effective segregation coefficient and absorption cross section of optical dopant is given.When the segregated solute disperses into the whole or just a part of melt homogenously,the concentration CS in solid interface will change by different formulas.If the crystal growth interface is conical and segregated solute disperses into melt in total or part,the solute concentration at r=2/3R,where r is the distance from the growth cross section center and R the crystal radius,is independent on the shape of the crystal growth interface,and its variation at r=2/3R can be regarded as the result from crystal growth in flat interface.With CS variation formula in solid and absorption cross section σ for optical dopant,the absorption coefficients along the crystal growth direction can be calculated,and the corresponding experimental value can be obtained through the crystal optical absorption spectra.By minimizing the half sum,whose independent variables are k,ΔW or σ,of the difference square between the calculated and experimental absorp-tion coefficients from one or more absorption peaks along the crystal growth di-rection,k and σ,or k and ΔW,can be determined at the same time through the Levenberg-Marquardt iteration method.Finally,the effective segregation coefficient k,ΔW and absorption cross sections of Nd:GGG were determined,the results fitted by two formula gave more closed effective segregation coefficient,and the value ΔW also indicates that the segregated dopant had nearly dispersed into the whole melt.Experimental results show that the method to determine effective segregation coefficient k,ΔW and absorption cross sections σ is convenient and reliable,and the two segregation formulas can describe the segregation during the crystal growth from melt relatively commendably.

  3. An Evaluation of Mass Absorption Cross-Section for Optical Carbon Analysis on Teflon Filter Media.

    Science.gov (United States)

    Presler-Jur, Paige; Doraiswamy, Prakash; Hammond, Oki; Rice, Joann

    2017-04-05

    Black carbon (BC) or elemental carbon (EC) is a by-product of incomplete fuel combustion, and contributes adversely to human health, visibility, and climate impacts. Previous studies have examined non-destructive techniques for particle light attenuation measurements on Teflon(®) filters to estimate BC. The incorporation of an inline Magee Scientific OT21 Transmissometer into the MTL AH-225 robotic weighing system provides the opportunity to perform optical transmission measurements on Teflon(®) filters at the same time as the gravimetric mass measurement. In this study, we characterize the performance of the inline OT21, and apply it to determine the mass absorption cross-section (MAC) of PM2.5 BC across the U.S. We analyzed 5393 archived Teflon(®) filters from the Chemical Speciation Network (CSN) collected during 2010-2011 and determined MAC by comparing light attenuation on Teflon(®) filters to corresponding thermal EC on quartz-fiber filters. Results demonstrated the importance of the initial transmission (I0) value used in light attenuation calculations. While light transmission varied greatly within filter lots, the average I0 of filter blanks during from the sampling period provided an estimate for archived filters. For newly collected samples, it is recommended that filter-specific I0 measurements be made (i.e., same filter before sample collection). The estimated MAC ranged from 6.9 to 9.4 m(2)/g that varied by region and season across the U.S., indicating that using a default value may lead to under- or over-estimated BC concentrations. An analysis of the chemical composition of these samples indicated good correlation with EC for samples with higher EC content as a fraction of total PM2.5 mass, while the presence of light scattering species such as crustal elements impacted the correlation affecting the MAC estimate. Overall, the method is demonstrated to be a quick, cost-effective approach to estimate BC from archived and newly sampled Teflon

  4. Effects of crossed electric and magnetic fields on the interband optical absorption spectra of variably spaced semiconductor superlattices

    Science.gov (United States)

    Zuleta, J. N.; Reyes-Gómez, E.

    2016-05-01

    The interband optical absorption spectra of a GaAs-Ga1-xAlxAs variably spaced semiconductor superlattice under crossed in-plane magnetic and growth-direction applied electric fields are theoretically investigated. The electronic structure, transition strengths and interband absorption coefficients are analyzed within the weak and strong magnetic-field regimes. A dramatic quenching of the absorption coefficient is observed, in the weak magnetic-field regime, as the applied electric field is increased, in good agreement with previous experimental measurements performed in a similar system under growth-direction applied electric fields. A decrease of the resonant tunneling in the superlattice is also theoretically obtained in the strong magnetic-field regime. Moreover, in this case, we found an interband absorption coefficient weakly dependent on the applied electric field. Present theoretical results suggest that an in-plane magnetic field may be used to tune the optical properties of variably spaced semiconductor superlattices, with possible future applications in solar cells and magneto-optical devices.

  5. [Ammonia gas concentration and velocity measurement using tunable diode laser absorption spectroscopy and optical signal cross-correlation method].

    Science.gov (United States)

    Zhang, Chun-Xiao; Wang, Fei; Li, Ning; Yan, Jian-Hua; Chi, Yong; Cen, Ke-Fa

    2009-10-01

    Simultaneous online measurement of gas concentration and velocity can be realized by tunable diode laser absorption spectroscopy (TDLAS) technique and optical signal cross-correlation method. The fundamental and relative factors of gas concentration and velocity measurement are described in the present paper. The spectral lines of NH3 used for gas sensing at communication band in near infrared range were selected and analyzed by the calculation based on the HITRAN database. In the verification experiment, NH3 and N2 were mixed by two mass flow meters and sent to flow through the quartz tube 0. 016 m in inner diameter and 1 m in length at normal temperature and pressure. The spectral line located at 6,548.7 cm(-1) was scanned at high frequency by the diode laser of 15 MHz linewidth and 1 cm' tunable range with no mode hoppings. The instantaneous NH3 absorbance was obtained using direct absorption method and the gas concentration was calculated. At the same time, the non-intrusive optical absorption signal cross-correlation method was utilized to obtain two concentration signals from two adjacent detectors mounted along the gas tube. The corresponding transit time of gas passing through the detectors was calculated by cross-correlation algorithm, and the average gas velocity was inferred according to the distance between the two detectors and the transit time. The relative errors were less than 7% for the gas concentration measurement, and less than 10% for the gas velocity measurement. Experimental results were proved to be of high precision and good repeatability in the lab. The feature of fast response and capacity immune to the in situ disturbance would lead to a potential in industry application for the real time measurement and control of gas pollutant emission in the future.

  6. Apparent PS II absorption cross-section and estimation of mean PAR in optically thin and dense suspensions of Chlorella.

    Science.gov (United States)

    Klughammer, Christof; Schreiber, Ulrich

    2015-01-01

    Theoretical prediction of effective mean PAR in optically dense samples is complicated by various optical effects, including light scattering and reflections. Direct information on the mean rate of photon absorption by PS II is provided by the kinetics of the fluorescence rise induced upon onset of strong actinic illumination (O-I1 rise). A recently introduced kinetic multi-color PAM fluorometer was applied to study the relationship between initial slope and cell density in the relatively simple model system of suspensions of Chlorella. Use of a curve fitting routine was made which was originally developed for assessment of the wavelength-dependent absorption cross-section of PS II, σ II(λ), in dilute suspensions. The model underlying analysis of the O-I1 rise kinetics is outlined and data on the relationship between fitted values of σ II(λ) and PAR in dilute samples are presented. With increasing cell density, lowering of apparent cross-section, (λ), with respect to σ II(λ), relates to a decrease of effective mean PAR, (λ), relative to incident PAR(λ). When ML and AL are applied in the same direction, the decline of (λ)/σ II(λ) with increasing optical density is less steep than that of the theoretically predicted (λ)/PAR(λ). It approaches a value of 0.5 when the same colors of ML and AL are used, in agreement with theory. These observations open the way for estimating mean PAR in optically dense samples via measurements of (λ)/σ II(λ)).

  7. Absorption-Modulated Crossed-Optical Fiber-Sensor Platform for Measurements in Liquid Environments and Flow Streams

    Directory of Open Access Journals (Sweden)

    Paul E. Henning

    2017-01-01

    Full Text Available A new evanescent-wave fiber sensor is described that utilizes absorption-modulated luminescence (AML in combination with a crossed-fiber sensor platform. The luminescence signals of two crossed-fiber reference regions, placed on opposite sides of the stretch of fiber supporting the absorbance sensor, monitor the optical intensity in the fiber core. Evanescent absorption of the sensor reduces a portion of the excitation light and modulates the luminescence of the second reference region. The attenuation is determined from the luminescence intensity of both reference regions similar to the Beer-Lambert Law. The AML-Crossed-Fiber technique was demonstrated using the absorbance of the Zn(II-PAN2 complex at 555 nm. A linear response was obtained over a zinc(II concentration range of 0 to 20 μM (approximately 0 to 1.3 ppm. A nonlinear response was observed at higher zinc(II concentrations and was attributed to depletion of higher-order modes in the fiber. This was corroborated by the measured induced repopulation of these modes.

  8. In vivo estimation of pigment composition and optical absorption cross-section by spectroradiometry in four aquatic photosynthetic micro-organisms.

    Science.gov (United States)

    Méléder, Vona; Laviale, Martin; Jesus, Bruno; Mouget, Jean Luc; Lavaud, Johann; Kazemipour, Farzaneh; Launeau, Patrick; Barillé, Laurent

    2013-12-05

    The objective of the present study was to estimate in vivo pigment composition and to retrieve absorption cross-section values, a(∗), of photosynthetic micro-organisms using a non-invasive technique of reflectance spectrometry. To test the methodology, organisms from different taxonomical groups and different pigment composition were used (Spirulina platensis a Cyanophyta, Porphyridium cruentum a Rhodophyta, Dunaliella tertiolecta a Chlorophyta and Entomoneis paludosa a Bacillariophyta) and photoacclimated to two different irradiance levels: 25 μmol photonm(-2)s(-1) (Low Light, LL) and 500 μmol photonm(-2)s(-1) (High Light, HL). Second derivative spectra from reflectance were used to identify pigment in vivo absorption bands that were linked to specific pigments detected by high performance liquid chromatography. Whereas some absorption bands such as those induced by Chlorophyll (Chl) a (416, 440, 625 and around 675 nm) were ubiquous, others were taxonomically specific (e.g. 636 nm for Chl c in E. paludosa) and/or photo-physiological dependent (e.g. 489 nm for zeaxanthin in the HL-acclimated S. platensis). The optical absorption cross-section, a(∗), was retrieved from reflectance data using a radiative transfer model previously developed for microphytobenthos. Despite the cellular Chl a decrease observed from LL to HL (up to 88% for S. platensis), the a(∗) increased, except for P. cruentum. This was attributed to a 'package effect' and to a greater absorption by photoprotective carotenoids that did not contribute to the energy transfer to the core Chl a.

  9. Er{sup 3+} ions doped tellurite glasses with high thermal stability, elasticity, absorption intensity, emission cross section and their optical application

    Energy Technology Data Exchange (ETDEWEB)

    Yousef, El Sayed, E-mail: omn_yousef2000@yahoo.com [Physics Dep., Faculty of Science, King Khalid University, P.O. Box 9003, Abha (Saudi Arabia); Physics Dep., Faculty of Science, Al-Azhar University, Assiut Branch, Assiut (Egypt)

    2013-06-05

    Highlights: ► Present glasses have high thermal stability. ► The glass sample C has the effective emission cross section bandwidth (64 nm). It has large stimulated emission cross-section (0.89 × 10{sup −20} cm{sup 2}). ► The optical gain coefficient to the population inversion of the {sup 4}I{sub 13/2} level is 8.87 cm{sup −1}. -- Abstract: Three samples of tellurite glasses within system 46TeO{sub 2}⋅15ZnO⋅9.0P{sub 2}O{sub 5}⋅30LiNbO{sub 3} doped with xEr{sub 2}O{sub 3} ions (where x = 4000, 8000 and 10,000 ppm) have been prepared by using the conventional melt-quenching method. These glasses have high thermal stability proved by using differential thermal analysis (DTA) measurements. Elastic properties of the glasses were investigated by measuring both longitudinal and shear velocities using the pulse-echo overlap technique at 5 MHz. Elastic moduli such as: longitudinal (λ), shear (μ), Bulk (B) and Young’s (Y) increased with the Er{sup 3+} concentration in the prepared glasses matrix. The optical properties of the glasses were estimated by measuring UV–vis-NIR spectroscopy. The Judd–Ofelt parameters, Ω{sub t} (t = 2, 4, 6) of Er{sup 3+} were evaluated from optical absorption spectra. The oscillator strength type transition probabilities, spectroscopic quality factors, branching ratio and radiative lifetimes of several excited states of Er{sup 3+} have been predicted using intensity Judd–Ofelt parameters. Gain cross-section for the Er{sup 3+} laser transition {sup 4}I{sub 13/2} → {sup 4}I{sub 15/2} was obtained. The results show 46TeO{sub 2}⋅15ZnO⋅9.0P{sub 2}O{sub 5}⋅30LiNbO{sub 3}⋅10,000 ppm Er{sub 2}O{sub 3} glass has the effective emission cross section bandwidth (64 nm) and large stimulated emission cross-section (0.89 × 10{sup −20} cm{sup 2}). The thermal stability, elastic and spectroscopic properties indicate that this glass doped with Er{sup 3+} is a promising candidate for optical applications and may be suitable

  10. A Novel Algorithm Applied to Common Thermal-Optical Transmission Data for Determining Mass Absorption Cross Sections of Atmospheric Black Carbon: Applications to the Indian Outflow

    Science.gov (United States)

    Andersson, A.; Sheesley, R. J.; Kirillova, E.; Gustafsson, O.

    2010-12-01

    High wintertime concentrations of black carbon aerosols (BCA) over South Asia and the Northern Indian Ocean are thought to have a large impact on the regional climate. Direct absorption of sunlight by BCAs causes heating of the atmosphere and cooling at the surface. To quantify such effects it is important to characterize a number of different properties of the aerosols. Here we present a novel application of the thermal-optical (OCEC) instrument in which the laser beam is used to obtain optical information about the aerosols. In particular, the novel algorithm accounts for non-carbon contributions to the light extinction. Combining these light extinction coefficients with the simultaneously constrained Elemental Carbon (EC) concentrations, the Mass Absorption Cross Section (MAC) is computed. Samples were collected during a continuous 14-month campaign Dec 2008 - Mar 2009 at Sinaghad in Western India and on Hanimaadhoo, the Northernmost Island in the Maldives. This data set suggests that the MAC of the BCAs are variable, sometimes by a factor of 3 compared to the mean. This observation adds to the complexity of calculating the radiative forcing for BCAs, reinforcing previous observations that parameters such as aerosol mixing state and sources need to be taken into account.

  11. Development of a tunable diode laser absorption sensor for online monitoring of industrial gas total emissions based on optical scintillation cross-correlation technique.

    Science.gov (United States)

    Zhang, Zhirong; Pang, Tao; Yang, Yang; Xia, Hua; Cui, Xiaojuan; Sun, Pengshuai; Wu, Bian; Wang, Yu; Sigrist, Markus W; Dong, Fengzhong

    2016-05-16

    We report the first application of gas total emission using a DFB diode laser for gas concentration measurements combined with two LEDs for gas velocity measurements. In situ gas total emissions and particle density measurements in an industrial pipeline using simultaneous tunable diode laser absorption spectroscopy (TDLAS) and optical scintillation cross-correlation technique (OSCC) are presented. Velocity mean values obtained are 7.59 m/s (OSCC, standard deviation is 1.37 m/s) and 8.20 m/s (Pitot tube, standard deviation is 1.47 m/s) in a steel plant pipeline for comparison. Our experiments demonstrate that the combined system of TDLAS and OSCC provides a new versatile tool for accurate measurements of total gas emissions.

  12. Geometrical interpretation of optical absorption

    Energy Technology Data Exchange (ETDEWEB)

    Monzon, J. J.; Barriuso, A. G.; Sanchez-Soto, L. L. [Departamento de Optica, Facultad de Fisica, Universidad Complutense, E-28040 Madrid (Spain); Montesinos-Amilibia, J. M. [Departamento de Geometria y Topologia, Facultad de Matematicas, Universidad Complutense, E-28040 Madrid (Spain)

    2011-08-15

    We reinterpret the transfer matrix for an absorbing system in very simple geometrical terms. In appropriate variables, the system appears as performing a Lorentz transformation in a (1 + 3)-dimensional space. Using homogeneous coordinates, we map that action on the unit sphere, which is at the realm of the Klein model of hyperbolic geometry. The effects of absorption appear then as a loxodromic transformation, that is, a rhumb line crossing all the meridians at the same angle.

  13. Cross resonant optical antenna.

    Science.gov (United States)

    Biagioni, P; Huang, J S; Duò, L; Finazzi, M; Hecht, B

    2009-06-26

    We propose a novel cross resonant optical antenna consisting of two perpendicular nanosized gold dipole antennas with a common feed gap. We demonstrate that the cross antenna is able to convert propagating fields of any polarization state into correspondingly polarized, localized, and enhanced fields and vice versa. The cross antenna structure therefore opens the road towards the control of light-matter interactions based on polarized light as well as the analysis of polarized fields on the nanometer scale.

  14. Cross Resonant Optical Antenna

    Science.gov (United States)

    Biagioni, P.; Huang, J. S.; Duò, L.; Finazzi, M.; Hecht, B.

    2009-06-01

    We propose a novel cross resonant optical antenna consisting of two perpendicular nanosized gold dipole antennas with a common feed gap. We demonstrate that the cross antenna is able to convert propagating fields of any polarization state into correspondingly polarized, localized, and enhanced fields and vice versa. The cross antenna structure therefore opens the road towards the control of light-matter interactions based on polarized light as well as the analysis of polarized fields on the nanometer scale.

  15. Single metal nanoparticle absorption spectroscopy and optical characterization

    Science.gov (United States)

    Muskens, O. L.; Del Fatti, N.; Vallée, F.; Huntzinger, J. R.; Billaud, P.; Broyer, M.

    2006-02-01

    Optical absorption spectra of small single metal nanoparticles are measured using a far-field technique combining a spatial modulation microscope with a broadband light source. Quantitative determination of the spectral and polarization dependencies of the absorption cross section of individual gold nanoparticles permits precise determination of their geometrical properties in excellent agreement with transmission electron microscopy measurements.

  16. Nonlinear optical absorption of photosynthetic pigment molecules in leaves.

    Science.gov (United States)

    Ye, Zi-Piao

    2012-04-01

    A mathematical formulation of the relationship between optical absorption coefficient of photosynthetic pigment molecules and light intensity was developed. It showed that physical parameters of photosynthetic pigment molecule (i.e., light absorption cross-section of photosynthetic pigment molecule, its average lifetime in the excited state, total photosynthetic pigment molecules, the statistical weight, or degeneracy of energy level of photosynthetic pigment molecules in the ground state and in the excited state) influenced on both the light absorption coefficient and effective light absorption cross-section of photosynthetic pigment molecules. Moreover, it also showed that both the light absorption coefficient and effective light absorption cross-section of photosynthetic pigment molecules were not constant, they decreased nonlinearly with light intensity increasing. The occupation numbers of photosynthetic pigment molecules in the excited states increased nonlinearly with light intensity increasing.

  17. Cavity-enhanced absorption for optical refrigeration

    CERN Document Server

    Seletskiy, Denis V; Sheik-Bahae, Mansoor

    2009-01-01

    A 20-fold increase over the single path optical absorption is demonstrated with a low loss medium placed in a resonant cavity. This has been applied to laser cooling of Yb:ZBLAN glass resulting in 90% absorption of the incident pump light. A coupled-cavity scheme to achieve active optical impedance matching is analyzed.

  18. Resonant Optical Absorption in Semiconductor Quantum Wells

    Institute of Scientific and Technical Information of China (English)

    YU Li-Yuan; CAO Jun-Cheng

    2004-01-01

    @@ We have calculated the intraband photon absorption coefficients of hot two-dimensional electrons interacting with polar-optical phonon modes in quantum wells. The dependence of the photon absorption coefficients on the photon wavelength λ is obtained both by using the quantum mechanical theory and by the balance-equation theory. It is found that the photon absorption spectrum displays a local resonant maximum, corresponding to LO energy, and the absorption peak vanishes with increasing the electronic temperature.

  19. Electric modulation of optical absorption in nanowires

    Science.gov (United States)

    Sakr, M. R.

    2016-11-01

    We have calculated the effect of an external electric field on the intersubband optical absorption of a nanowire subjected to a perpendicular magnetic field and Rashba effect. The absorption peaks due to optical transitions that are forbidden in the absence of the intersubband coupling experience strong amplitude modulation. This effect is quadratic in electric fields applied along the direction of quantum confinement or perpendicularly to tune the Rashba parameter. The electric field also induces frequency modulation in the associated spectrum. On the other hand, transitions that are normally allowed show, to a large extent, a parallel band effect, and accordingly they are responsible for strong optical absorption.

  20. High optical absorption in graphene

    CERN Document Server

    Apell, S P; Hägglund, C

    2012-01-01

    A simple analysis is performed for the absorption properties of graphene; sandwiched between two media. For a proper choice of media and graphene doping/gating one can approach 50-100% absorption in the GHz-THz range for the one atom thick material. This absorption is controlled by a characteristic chemical potential which depends only on carrier life-time and the indexes of refraction of the dielectric embedding.

  1. Rotational averaging of multiphoton absorption cross sections

    Energy Technology Data Exchange (ETDEWEB)

    Friese, Daniel H., E-mail: daniel.h.friese@uit.no; Beerepoot, Maarten T. P.; Ruud, Kenneth [Centre for Theoretical and Computational Chemistry, University of Tromsø — The Arctic University of Norway, N-9037 Tromsø (Norway)

    2014-11-28

    Rotational averaging of tensors is a crucial step in the calculation of molecular properties in isotropic media. We present a scheme for the rotational averaging of multiphoton absorption cross sections. We extend existing literature on rotational averaging to even-rank tensors of arbitrary order and derive equations that require only the number of photons as input. In particular, we derive the first explicit expressions for the rotational average of five-, six-, and seven-photon absorption cross sections. This work is one of the required steps in making the calculation of these higher-order absorption properties possible. The results can be applied to any even-rank tensor provided linearly polarized light is used.

  2. Rotational averaging of multiphoton absorption cross sections

    Science.gov (United States)

    Friese, Daniel H.; Beerepoot, Maarten T. P.; Ruud, Kenneth

    2014-11-01

    Rotational averaging of tensors is a crucial step in the calculation of molecular properties in isotropic media. We present a scheme for the rotational averaging of multiphoton absorption cross sections. We extend existing literature on rotational averaging to even-rank tensors of arbitrary order and derive equations that require only the number of photons as input. In particular, we derive the first explicit expressions for the rotational average of five-, six-, and seven-photon absorption cross sections. This work is one of the required steps in making the calculation of these higher-order absorption properties possible. The results can be applied to any even-rank tensor provided linearly polarized light is used.

  3. Record Multiphoton Absorption Cross-Sections by Dendrimer Organometalation.

    Science.gov (United States)

    Simpson, Peter V; Watson, Laurance A; Barlow, Adam; Wang, Genmiao; Cifuentes, Marie P; Humphrey, Mark G

    2016-02-12

    Large increases in molecular two-photon absorption, the onset of measurable molecular three-photon absorption, and record molecular four-photon absorption in organic π-delocalizable frameworks are achieved by incorporation of bis(diphosphine)ruthenium units with alkynyl linkages. The resultant ruthenium alkynyl-containing dendrimers exhibit strong multiphoton absorption activity through the biological and telecommunications windows in the near-infrared region. The ligated ruthenium units significantly enhance solubility and introduce fully reversible redox switchability to the optical properties. Increasing the ruthenium content leads to substantial increases in multiphoton absorption properties without any loss of optical transparency. This significant improvement in multiphoton absorption performance by incorporation of the organometallic units into the organic π-framework is maintained when the relevant parameters are scaled by molecular weights or number of delocalizable π-electrons. The four-photon absorption cross-section of the most metal-rich dendrimer is an order of magnitude greater than the previous record value.

  4. Optical absorption spectra of Ag-11 isomers

    DEFF Research Database (Denmark)

    Martinez, Jose Ignacio; Fernandez, E. M.

    2009-01-01

    The optical absorption spectra of the three most; stable structural isomers of the Ag-11 cluster were calculated using the time-dependent, density functional theory within the Casida formalism. The slightly different, spectra, of the isomers may permit the identification of the ground-stale confi......The optical absorption spectra of the three most; stable structural isomers of the Ag-11 cluster were calculated using the time-dependent, density functional theory within the Casida formalism. The slightly different, spectra, of the isomers may permit the identification of the ground...

  5. Enhanced optical absorption and electric field resonance in diabolo metal bar optical antennas.

    Science.gov (United States)

    Pan, Zeyu; Guo, Junpeng

    2013-12-30

    Resonance behaviors of the fundamental resonance mode of diabolo metal bar optical antennas are investigated by using finite-difference time-domain (FDTD) numerical simulations and a dipole oscillator model. It is found that as the waist of the diabolo metal bar optical antenna is reduced, optical energy absorption cross section and near field enhancement at resonance increase significantly. Also reduction of the diabolo waist width causes red-shift of the resonant wavelengths in the spectra of absorption cross-section, scattering cross-section, and the near electric field. A dipole oscillator model including the self-inductance force is used to fit the FDTD numerical simulation results. The dipole oscillator model characterizes well the resonance behaviors of narrow waist diabolo metal bar optical antennas.

  6. Optical Model and Cross Section Uncertainties

    Energy Technology Data Exchange (ETDEWEB)

    Herman,M.W.; Pigni, M.T.; Dietrich, F.S.; Oblozinsky, P.

    2009-10-05

    Distinct minima and maxima in the neutron total cross section uncertainties were observed in model calculations using spherical optical potential. We found this oscillating structure to be a general feature of quantum mechanical wave scattering. Specifically, we analyzed neutron interaction with 56Fe from 1 keV up to 65 MeV, and investigated physical origin of the minima.We discuss their potential importance for practical applications as well as the implications for the uncertainties in total and absorption cross sections.

  7. Remark on: the neutron spherical optical-model absorption.

    Energy Technology Data Exchange (ETDEWEB)

    Smith, A. B.; Nuclear Engineering Division

    2007-06-30

    The energy-dependent behavior of the absorption term of the spherical neutron optical potential for doubly magic {sup 208}Pb and the neighboring {sup 209}Bi is examined. These considerations suggest a phenomenological model that results in an intuitively attractive energy dependence of the imaginary potential that provides a good description of the observed neutron cross sections and that is qualitatively consistent with theoretical concepts. At the same time it provides an alternative to some of the arbitrary assumptions involved in many conventional optical-model interpretations reported in the literature and reduces the number of the parameters of the model.

  8. Optical Absorption Spectroscopy for Gas Analysis in Biomass Gasification

    DEFF Research Database (Denmark)

    Grosch, Helge

    the concentration of the mentioned compounds. However, continuous measurements of different species directly in the gas (in-situ) and at the same time are scarce. In this work, the basis of optical in-situ analysis with ultraviolet and infrared spectroscopy was build to determine the concentration of the most...... important gas species of the low-temperature circulating fluidized bed gasifier. At first, a special gas cell,the hot gas flow cell (HGC), was build up and veried. In this custom-made gas cell, the optical properties, the so-called absorption cross-sections, of the most important sulfur and aromatic...

  9. Universal Zero Conductivity Condition for Optical Absorption

    CERN Document Server

    Guo, Yu; Jacob, Zubin

    2016-01-01

    Harnessing information and energy from light within a nanoscale mode volume is a fundamental challenge for nanophotonic applications ranging from solar photovoltaics to single photon detectors. Here, we show the existence of a universal condition in materials that sheds light on fundamental limits of electromagnetic to matter energy conversion (transduction). We show that the upper limit of absorption rate (transduction rate) in any nanoscale absorber converting light to matter degrees of freedom is revealed by the zero of optical conductivity at complex frequencies ($\\sigma(\\omega^\\prime + i\\omega^{\\prime\\prime})= 0$). We trace the origin of this universal zero conductivity condition to causality requirements on any passive linear response function and propose an experiment of absorption resonances using plasmonic nanoparticles to experimentally verify this universal zero conductivity condition. Our work is widely applicable to linear systems across the electromagnetic spectrum and allows for systematic opti...

  10. NOVEL SPECTRUM ABSORPTION OPTICAL FIBER METHANE SENSOR

    Institute of Scientific and Technical Information of China (English)

    Wang Shutao; Che Rensheng

    2005-01-01

    Based on spectrum principle and analyzing the infrared absorption spectrum of methane, a kind of optical fiber methane gas sensor and its system are developed. DFBLD(Distributed feedback laser diode) in 1 300 nm waveband is used as illuminant and phase-detecting technology is used to carry out harmonic wave detecting the concentration of methane. The sensitivity can arrive at 10-5.Experiments results show that the performance targets of the sensor such as sensitivity can basically satisfy the requests of methane detection.

  11. Optical microresonators as single-particle absorption spectrometers

    Science.gov (United States)

    Heylman, Kevin D.; Thakkar, Niket; Horak, Erik H.; Quillin, Steven C.; Cherqui, Charles; Knapper, Kassandra A.; Masiello, David J.; Goldsmith, Randall H.

    2016-12-01

    Optical measurements of nanoscale objects offer major insights into fundamental biological, material and photonic properties. In absorption spectroscopy, sensitivity limits applications at the nanoscale. Here, we present a new single-particle double-modulation photothermal absorption spectroscopy method that employs on-chip optical whispering-gallery-mode (WGM) microresonators as ultrasensitive thermometers. Optical excitation of a nanoscale object on the microresonator produces increased local temperatures that are proportional to the absorption cross-section of the object. We resolve photothermal shifts in the resonance frequency of the microresonator that are smaller than 100 Hz, orders of magnitude smaller than previous WGM sensing schemes. The application of our new technique to single gold nanorods reveals a dense array of sharp Fano resonances arising from the coupling between the localized surface plasmon of the gold nanorod and the WGMs of the resonator, allowing for the exploration of plasmonic-photonic hybridization. In terms of the wider applicability, our approach adds label-free spectroscopic identification to microresonator-based detection schemes.

  12. Stochastic approach to phonon-assisted optical absorption

    OpenAIRE

    Zacharias, Marios; Patrick, Christopher E.; Giustino, Feliciano

    2015-01-01

    We develop a first-principles theory of phonon-assisted optical absorption in semiconductors and insulators which incorporates the temperature dependence of the electronic structure. We show that the Hall-Bardeen-Blatt theory of indirect optical absorption and the Allen-Heine theory of temperature-dependent band structures can be derived from the present formalism by retaining only one-phonon processes. We demonstrate this method by calculating the optical absorption coefficient of silicon us...

  13. Quantitative photoacoustic microscopy of optical absorption coefficients from acoustic spectra in the optical diffusive regime

    OpenAIRE

    Guo, Zijian; Favazza, Christopher; Garcia-Uribe, Alejandro; Lihong V. Wang

    2012-01-01

    Photoacoustic (PA) microscopy (PAM) can image optical absorption contrast with ultrasonic spatial resolution in the optical diffusive regime. Conventionally, accurate quantification in PAM requires knowledge of the optical fluence attenuation, acoustic pressure attenuation, and detection bandwidth. We circumvent this requirement by quantifying the optical absorption coefficients from the acoustic spectra of PA signals acquired at multiple optical wavelengths. With the acoustic spectral method...

  14. Near IR two photon absorption of cyanines dyes: application to optical power limiting at telecommunication wavelengths

    Science.gov (United States)

    Bouit, Pierre-Antoine; Wetzel, Guillaume; Feneyrou, Patrick; Bretonnière, Yann; Kamada, Kenji; Maury, Olivier; Andraud, Chantal

    2008-02-01

    The design and synthesis of symmetrical and unsymmetrical heptamethine cyanines is reported. These chromophores present significant two-photon cross section in the 1400-1600 nm spectral range. In addition, they display optical power limiting (OPL) properties. OPL curves were interpreted on the basis of two-photon absorption (2PA) followed by excited state absorption (ESA). Finally, these molecules present several relevant properties (nonlinear absorption properties, two-step gram scale synthesis, high solubility, good thermal stability), which could lead to numerous practical applications in material science (solid state optical limiting, signal processing) or in biology (imaging).

  15. Estimation of the Human Absorption Cross Section Via Reverberation Models

    DEFF Research Database (Denmark)

    Steinböck, Gerhard; Pedersen, Troels; Fleury, Bernard Henri;

    2016-01-01

    Since the presence of persons affects the reverberation time observed for in-room channels, the absorption cross section of a person can be estimated from measurements via Sabine's and Eyring's models for the reverberation time. We propose an estimator relying on the more accurate model by Eyring...... and compare the obtained results to those of Sabine's model. We find that the absorption by persons is large enough to be measured with a wideband channel sounder and that estimates of the human absorption cross section differ for the two models. The obtained values are comparable to values reported...... in the literature. We also suggest the use of controlled environments with low average absorption coefficients to obtain more reliable estimates. The obtained values can be used to predict the change of reverberation time with persons in the propagation environment. This allows prediction of channel characteristics...

  16. Temperature-dependent absorption cross sections for hydrogen peroxide vapor

    Science.gov (United States)

    Nicovich, J. M.; Wine, P. H.

    1988-03-01

    Relative absorption cross sections for hydrogen peroxide vapor were measured over the temperature ranges 285-381 K for lambda = 230 nm-295 nm and 300-381 K for lambda = 193 nm-350 nm. The well established 298 K cross sections at 202.6 and 228.8 nm were used as an absolute calibration. A significant temperature dependence was observed at the important tropospheric photolysis wavelengths lambda over 300 nm. Measured cross sections were extrapolated to lower temperatures, using a simple model which attributes the observed temperature dependence to enhanced absorption by molecules possessing one quantum of O-O stretch vibrational excitation. Upper tropospheric photodissociation rates calculated using the extrapolated cross sections are about 25 percent lower than those calculated using currently recommended 298 K cross sections.

  17. Temperature-dependent high resolution absorption cross sections of propane

    Science.gov (United States)

    Beale, Christopher A.; Hargreaves, Robert J.; Bernath, Peter F.

    2016-10-01

    High resolution (0.005 cm-1) absorption cross sections have been measured for pure propane (C3H8). These cross sections cover the 2550-3500 cm-1 region at five temperatures (from 296 to 700 K) and were measured using a Fourier transform spectrometer and a quartz cell heated by a tube furnace. Calibrations were made by comparison to the integrated cross sections of propane from the Pacific Northwest National Laboratory. These are the first high resolution absorption cross sections of propane for the 3 μm region at elevated temperatures. The cross sections provided may be used to monitor propane in combustion environments and in astronomical sources such as the auroral regions of Jupiter, brown dwarfs and exoplanets.

  18. Ozone absorption cross section measurements in the Wulf bands

    Science.gov (United States)

    Anderson, Stuart M.; Hupalo, Peter; Mauersberger, Konrad

    1993-08-01

    A tandem dual-beam spectrometer has been developed to determine ozone absorption cross sections for 13 selected wavelengths between 750 and 975 nm at room temperature. The increasingly pronounced structure in this region may interfere with atmospheric trace gas transitions that are useful for remote sensing and complicate the measurement of aerosols. Ozone concentrations were determined by absorption at the common HeNe laser transition near 632.8 nm using the absolute cross section reported previously. The overall accuracy of these room temperature measurements is generally better than 2 percent. A synoptic near-IR spectrum scaled to these measurements is employed for comparison with results of previous studies.

  19. UV-absorption cross sections of a series of monocyclic aromatic compounds

    Science.gov (United States)

    Trost, Barbara; Stutz, Jochen; Platt, Ulrich

    Aromatic hydrocarbons are of increasing importance as components of urban volatile organic compounds. Besides gas-chromatographic techniques, the detection of aromatic hydrocarbons by Differential Optical Absorption Spectroscopy (DOAS) is a promising alternative technique. The absolute calibration of DOAS-instruments is straightforward: Only the absorption cross sections of the species of interest and the instrument function are required. In this work we present measurements of high-resolution gas phase UV-absorption cross section spectra of benzene (C 6H 6), toluene (C 7H 8), p-, m-, o-xylene (C 8H 10), phenol (C 6H 5OH), benzaldehyde (C 7H 6O) and the cresol isomers (C 7H 8O), p-, m- and o-cresol in the wavelength interval between 230 and 290 nm. The spectral resolution is 0.11 nm (FWHM), except for o- and m-cresol, where the resolution is 0.32 nm (FWHM). These spectra can be used to calibrate DOAS-instruments. From these absorption cross sections typical detection limits for the atmospheric measurements with Long-Path-Differential Optical Absorption Spectroscopy are calculated to be in the range of a few ppt (phenol), to a few 10 ppt (cresol, benzaldehyde, benzene, p-xylene), up to 200 ppt ( o-xylene). The attainability of these detection limits is demonstrated by measurements of atmospheric phenol and benzaldehyde.

  20. Effect of idler absorption in pulsed optical parametric oscillators.

    Science.gov (United States)

    Rustad, Gunnar; Arisholm, Gunnar; Farsund, Øystein

    2011-01-31

    Absorption at the idler wavelength in an optical parametric oscillator (OPO) is often considered detrimental. We show through simulations that pulsed OPOs with significant idler absorption can perform better than OPOs with low idler absorption both in terms of conversion efficiency and beam quality. The main reason for this is reduced back conversion. We also show how the beam quality depends on the beam width and pump pulse length, and present scaling relations to use the example simulations for other pulsed nanosecond OPOs.

  1. Quantitative photoacoustic microscopy of optical absorption coefficients from acoustic spectra in the optical diffusive regime.

    Science.gov (United States)

    Guo, Zijian; Favazza, Christopher; Garcia-Uribe, Alejandro; Wang, Lihong V

    2012-06-01

    Photoacoustic (PA) microscopy (PAM) can image optical absorption contrast with ultrasonic spatial resolution in the optical diffusive regime. Conventionally, accurate quantification in PAM requires knowledge of the optical fluence attenuation, acoustic pressure attenuation, and detection bandwidth. We circumvent this requirement by quantifying the optical absorption coefficients from the acoustic spectra of PA signals acquired at multiple optical wavelengths. With the acoustic spectral method, the absorption coefficients of an oxygenated bovine blood phantom at 560, 565, 570, and 575 nm were quantified with errors of acoustic spectral method provides greater quantification accuracy in the optical diffusive regime. The limitations of the acoustic spectral method was also discussed.

  2. Carbonyl Sulfide Isotopologues: Ultraviolet Absorption Cross Sections and Stratospheric Photolysis

    DEFF Research Database (Denmark)

    Danielache, Sebastian Oscar; Nanbu, Shinkoh; Eskebjerg, Carsten

    2009-01-01

    Ultraviolet absorption cross sections of the main and substituted carbonyl sulfide isotopologues were calculated using wavepacket dynamics. The calculated absorption cross section of 16O12C32S is in very good agreement with the accepted experimental spectrum between 190 and 250 nm. Relative to 16O......12C32S, isotopic substitution shows a significant enhancement of the cross section for 16O13C32S, a significant reduction for 18O12C32S and 17O12C32S and almost no change for the sulfur isotopologues 16O12C33S, 16O12C34S, and 16O12C36S. The analysis of the initial wavepackets shows that these changes...

  3. Weak absorption test and defect analysis of optical coatings

    Institute of Scientific and Technical Information of China (English)

    HE Hong-bo; LI Xia; FAN Shu-hai; ZHAO Yuan-an; SHAO Jian-da; FAN Zheng-xiu

    2005-01-01

    Surface thermal lensing technique was developed into a high-sensitive apparatus for weak absorption test and defect analysis of optical coatings. A continuous-wave 1 064 nm Nd:YAG laser and a He-Ne laser were employed as pump source and probe source, respectively. Low noise photoelectrical components and a lock-in amplifier were used for photo-thermal deformation signal detection. In order to improve sensitivity, the apparatus configuration was optimized by choosing appropriate parameters, including pump beam spot size, chopper frequency, detection distance, waist radius and position of probe beam. Coating samples were mounted on a x-y stage. Different procedures, such as single spot, linear scan and 2-dimension area scan, could be performed manually or automatically. Various optical coatings were prepared by both electron beam evaporation and ion beam sputtering deposition. High sensitivity was obtained and low to 1×10-7 weak absorption was tested in low-loss coating samples. For the sensitivity extreme of the system, 1×10-8 absorption was reason out to be measured by surface thermal lensing technique. Very small standard deviation was achieved for the reproducibility evaluation. Moreover, a spatial resolution of 25 micron was proved according to the area scan which traced out the profile of photo-thermal defects inside optical coatings. The system was employed in the analyses of optical absorption, absorption uniformity and defect characterization, and revealed the relationship between laser-induced damage and absorption of optical coatings.

  4. Exploring the origin of high optical absorption in conjugated polymers

    KAUST Repository

    Vezie, Michelle S.

    2016-05-16

    The specific optical absorption of an organic semiconductor is critical to the performance of organic optoelectronic devices. For example, higher light-harvesting efficiency can lead to higher photocurrent in solar cells that are limited by sub-optimal electrical transport. Here, we compare over 40 conjugated polymers, and find that many different chemical structures share an apparent maximum in their extinction coefficients. However, a diketopyrrolopyrrole-thienothiophene copolymer shows remarkably high optical absorption at relatively low photon energies. By investigating its backbone structure and conformation with measurements and quantum chemical calculations, we find that the high optical absorption can be explained by the high persistence length of the polymer. Accordingly, we demonstrate high absorption in other polymers with high theoretical persistence length. Visible light harvesting may be enhanced in other conjugated polymers through judicious design of the structure.

  5. Luminescence decay and the absorption cross section of individual single-walled carbon nanotubes.

    Science.gov (United States)

    Berciaud, Stéphane; Cognet, Laurent; Lounis, Brahim

    2008-08-15

    The absorption cross section of highly luminescent individual single-walled carbon nanotubes is determined using time-resolved and cw luminescence spectroscopy. A mean value of approximately 1 x 10(-17) cm2 per carbon atom is obtained for (6,5) tubes excited at their second optical transition, and corroborated by single tube photothermal absorption measurements. Biexponential luminescence decays are systematically observed, with short and long lifetimes around 45 and 250 ps. This behavior is attributed to the band edge exciton fine structure with a dark level lying a few meV below a bright one.

  6. Stochastic Approach to Phonon-Assisted Optical Absorption

    Science.gov (United States)

    Zacharias, Marios; Patrick, Christopher E.; Giustino, Feliciano

    2015-10-01

    We develop a first-principles theory of phonon-assisted optical absorption in semiconductors and insulators which incorporates the temperature dependence of the electronic structure. We show that the Hall-Bardeen-Blatt theory of indirect optical absorption and the Allen-Heine theory of temperature-dependent band structures can be derived from the present formalism by retaining only one-phonon processes. We demonstrate this method by calculating the optical absorption coefficient of silicon using an importance sampling Monte Carlo scheme, and we obtain temperature-dependent line shapes and band gaps in good agreement with experiment. The present approach opens the way to predictive calculations of the optical properties of solids at finite temperature.

  7. Mid-IR Absorption Cross-Section Measurements of Hydrocarbons

    KAUST Repository

    Alrefae, Majed Abdullah

    2013-05-01

    Laser diagnostics are fast-response, non-intrusive and species-specific tools perfectly applicable for studying combustion processes. Quantitative measurements of species concentration and temperature require spectroscopic data to be well-known at combustion-relevant conditions. Absorption cross-section is an important spectroscopic quantity and has direct relation to the species concentration. In this work, the absorption cross-sections of basic hydrocarbons are measured using Fourier Transform Infrared (FTIR) spectrometer, tunable Difference Frequency Generation laser and fixed wavelength helium-neon laser. The studied species are methane, methanol, acetylene, ethylene, ethane, ethanol, propylene, propane, 1-butene, n-butane, n-pentane, n-hexane, and n-heptane. The Fourier Transform Infrared (FTIR) spectrometer is used for the measurements of the absorption cross-sections and the integrated band intensities of the 13 hydrocarbons. The spectral region of the spectra is 2800 – 3400 cm-1 (2.9 – 3.6 μm) and the temperature range is 673 – 1100 K. These valuable data provide huge opportunities to select interference-free wavelengths for measuring time-histories of a specific species in a shock tube or other combustion systems. Such measurements can allow developing/improving chemical kinetics mechanisms by experimentally determining reaction rates. The Difference Frequency Generation (DFG) laser is a narrow line-width, tunable laser in the 3.35 – 3.53 μm wavelength region which contains strong absorption features for most hydrocarbons due to the fundamental C-H vibrating stretch. The absorption cross-sections of propylene are measured at seven different wavelengths using the DFG laser. The temperature range is 296 – 460 K which is reached using a Reflex Cell. The DFG laser is very attractive for kinetic studies in the shock tube because of its fast time response and the potential possibility of making species-specific measurements. The Fixed wavelength

  8. Low level optical absorption measurements on organic semiconductors

    Energy Technology Data Exchange (ETDEWEB)

    Stella, M.; Rojas, F.; Escarre, J.; Asensi, J.M.; Bertomeu, J.; Andreu, J. [Dept. de Fisica Aplicada i Optica, Universitat de Barcelona. Av. Diagonal 647, 08028 Barcelona (Spain); Voz, C.; Puigdollers, J.; Fonrodona, M. [Micro and Nano Technology Group (MNT), Dept. d' Enginyeria Electronica, Universitat Politecnica de Catalunya, C/Jordi Girona 1-3, Campus Nord - Modul C4, 08034 Barcelona (Spain)

    2006-06-15

    The optical absorption of n-type (C{sub 60} and PTCDA) and p-type (CuPc and pentacene) organic semiconductors is investigated by optical transmission and photothermal deflection spectroscopy. The usual absorption bands related to HOMO-LUMO transitions are observed in the high absorption region of transmission spectra. Photothermal deflection spectroscopy also evidences exponential absorption shoulders with characteristic energies 47meV for CuPc, 38meV for pentacene, 50 meV for PTCDA and 87meV for C{sub 60}. In addition, broad bands in the low absorption level are observed for C{sub 60} and PTCDA. These bands have been attributed to contamination due to air exposure. On the other hand, in CuPc a clear absorption peak at 1.12eV is observed with smaller features at 1.04eV, 1.20eV and 1.33eV. These peaks are attributed to transitions between the Pc levels of CuPc ions. Finally, the optical absorption expected in blends of organic semiconductors is estimated by an effective media approximation. (author)

  9. Tunable optical absorption in silicene molecules

    KAUST Repository

    Mokkath, Junais Habeeb

    2016-07-13

    Two-dimensional materials with a tunable band gap that covers a wide range of the solar spectrum hold great promise for sunlight harvesting. For this reason, we investigate the structural, electronic, and optical properties of silicene molecules using time dependent density functional theory. We address the influence of the molecular size, buckling, and charge state as well as that of a dielectric environment. Unlike planar graphene molecules, silicene molecules prefer to form low-buckled structures with strong visible to ultraviolet optical response. We also identify molecular plasmons.

  10. Luminescence and optical absorption determination in porous silicon

    Energy Technology Data Exchange (ETDEWEB)

    Nogal, U.; Calderon, A.; Marin, E.; Rojas T, J. B.; Juarez, A. G., E-mail: u_nogal@hotmail.com [IPN, Centro de Investigacion en Ciencia Aplicada y Tecnologia Avanzada, Calz. Legaria No. 694, Col. Irrigacion, 11500 Mexico D. F. (Mexico)

    2012-10-15

    We applied the photoacoustic spectroscopy technique in order to obtain the optical absorption spectrum in porous silicon samples prepared by electrochemical anodic etching on n-type, phosphorous doped, (100)-oriented crystal-line silicon wafer with thickness of 300 {mu}m and 1-5 {omega}cm resistivity. The porous layers were prepared with etching times of 13, 20, 30, 40 and 60 minutes. Also, we realized a comparison among the optical absorption spectrum with the photoluminescence and photo reflectance ones, both obtained at room temperature. Our results show that the absorption spectrum of the samples of porous silicon depends notably of the etching time an it consist of two distinguishable absorption bands, one in the Vis region and the other one in the UV region. (Author)

  11. Calculated optical absorption of different perovskite phases

    DEFF Research Database (Denmark)

    Castelli, Ivano Eligio; Thygesen, Kristian Sommer; Jacobsen, Karsten Wedel

    2015-01-01

    We present calculations of the optical properties of a set of around 80 oxides, oxynitrides, and organometal halide cubic and layered perovskites (Ruddlesden-Popper and Dion-Jacobson phases) with a bandgap in the visible part of the solar spectrum. The calculations show that for different classes...

  12. Defects and the optical absorption in nanocrystalline ZnO

    Energy Technology Data Exchange (ETDEWEB)

    Dutta, Sreetama [Department of Physics, University of Calcutta, 92 Acharya Prafulla Chandra Road, Kolkata 700 009 (India); Chattopadhyay, Sanjay [Department of Physics, Taki Government College, Taki 743429 (India); Sutradhar, Manas [Department of Chemistry, University of Calcutta, 92 Acharya Prafulla Chandra Road, Kolkata 700 009 (India); Sarkar, Anindya [Department of Physics, Bangabasi Morning College, 19 Rajkumar Chakraborty Sarani, Kolkata 700 009 (India); Chakrabarti, Mahuya [Variable Energy Cyclotron Centre, 1/AF, Bidhannagar, Kolkata 700 064 (India); Sanyal, Dirtha [Variable Energy Cyclotron Centre, 1/AF, Bidhannagar, Kolkata 700 064 (India); Jana, Debnarayan [Department of Physics, University of Calcutta, 92 Acharya Prafulla Chandra Road, Kolkata 700 009 (India)

    2007-06-13

    The correlation between the structural and optical properties of mechanically milled high purity ZnO powder is reported in the present work. Reduction of average grain size and enhancement of strain as a result of milling have been estimated from the broadening of x-ray powder diffraction patterns. After milling, the optical bandgap, revealed from absorption spectroscopy, has been red-shifted and the width of the localized states, calculated from the analysis of the Urbach tail below the absorption edge, has been extended more and more into the bandgap. Moreover, the band tailing parameter is seen to vary exponentially with the inverse of the grain size. Finally, the positron annihilation technique has been employed to identify the nature of defects present (or generated due to milling) in the system and thereby to correlate the defect mediated modification of optical absorption in ZnO.

  13. Cross-layer design in optical networks

    CERN Document Server

    Brandt-Pearce, Maïté; Demeester, Piet; Saradhi, Chava

    2013-01-01

    Optical networks have become an integral part of the communications infrastructure needed to support society’s demand for high-speed connectivity.  Cross-Layer Design in Optical Networks addresses topics in optical network design and analysis with a focus on physical-layer impairment awareness and network layer service requirements, essential for the implementation and management of robust scalable networks.  The cross-layer treatment includes bottom-up impacts of the physical and lambda layers, such as dispersion, noise, nonlinearity, crosstalk, dense wavelength packing, and wavelength line rates, as well as top-down approaches to handle physical-layer impairments and service requirements.

  14. Study on Optical Absorption Behavior of Dyestuff in Fabric

    Institute of Scientific and Technical Information of China (English)

    YANG Hong-ying; ZHU Su-kang; ZUO Lei; ZHU Ping-ping; PAN Ning

    2008-01-01

    Fabric is a kind of turbid materials with strong light scattering,to which the Kubelka-Munk theory can be applied to describe it optical behavior.In this paper,the light absorption coefficients of dyestuff in fabrics are obtained by test and calculation thnmgh a special method proposed by the authors.Then the optical behaviours of dyestuff in fabric are studied.Results show that,the absorption coeffident of dye in fabric is non-scalable and exponential to dye concentrafion in fabric which is totally different from that of the dye in transparent medm like water.

  15. Differential optical absorption spectrometer for measurement of tropospheric pollutants.

    Science.gov (United States)

    Evangelisti, F; Baroncelli, A; Bonasoni, P; Giovanelli, G; Ravegnani, F

    1995-05-20

    Our institute has recently developed a differential optical absorption spectrometry system called the gas analyzer spectrometer correlating optical absorption differences (GASCOAD), which features as a detector a linear image sensor that uses an artificial light source for long-path tropospheric-pollution monitoring. The GASCOAD, its method of eliminating interference from background sky light, and subsequent spectral analysis are reported and discussed. The spectrometer was used from 7 to 22 February 1993 in Milan, a heavily polluted metropolitan area, to measure the concentrations of SO(2), NO(2), O(3), and HNO(2) averaged over a 1.7-km horizontal light path. The findings are reported and briefly discussed.

  16. Semiconductor optical modulator by using electron depleting absorption control

    OpenAIRE

    Yamada, Minoru; Noda, Kazuhiro; Kuwamura, Yuji; Nakanishi, Hirohumi; Imai, Kiyohumi

    1992-01-01

    Operation of a newly proposed semiconductor optical modulator based on absorption control by electron depletion around a p-n junction is demonstrated, forming preliminary structures of waveguide-type as well as panel-type (or surface-illuminated type) devices. The optical absorption is occurred at the intrinsic energy levels in the band structure not at the extended state into the band-gap. Performance of 35 dB on-off extinction ratio for 4 V variation of the applied voltage was obtained in a...

  17. Silver Nanoparticles with Broad Multiband Linear Optical Absorption

    KAUST Repository

    Bakr, Osman M.

    2009-07-06

    A simple one-pot method produces silver nanoparticles coated with aryl thiols that show intense, broad nonplasmonic optical properties. The synthesis works with many aryl-thiol capping ligands, including water-soluble 4-mercaptobenzoic acid. The nanoparticles produced show linear absorption that is broader, stronger, and more structured than most conventional organic and inorganic dyes.

  18. Two-Photon Absorption and Optical Power Limiting Based on New Organic Dyes

    Institute of Scientific and Technical Information of China (English)

    周广勇; 王东; 邵宗书; 蒋民华; 雷虹

    2001-01-01

    Two new organic dye samples J and L with a large two-photon absorption (TPA) cross section have been reported.The linear absorption spectra show that there is no linear absorption at the wavelength from 650 to 1200 nm.The molecular TPA cross section was measured to be as high as 2.59×10-47 cm4.s and 2.98×10-47 cm4.s at 1064 nm for samples J and L, respectively. The input-output curves indicate that there is a clear optical power limiting behaviour when the input intensity is higher than 0.4 GW/cm2. Furthermore, the basic theory of the TPA process has been discussed.

  19. Aggregation induced enhanced emission of conjugated dendrimers with a large intrinsic two-photon absorption cross-section

    NARCIS (Netherlands)

    Xu, Bin; Zhang, Jibo; Fang, Honghua; Ma, Suqian; Chen, Qidai; Sun, Hongbo; Im, Chan; Tian, Wenjing

    2014-01-01

    Organic nonlinear optical materials combining high luminescence quantum yields and large two-photon absorption cross-sections are attractive for both fundamental research and practical applications, such as up-converted lasers and two-photon fluorescence microscopy. Herein, we reported a series of

  20. Two-Photon-Absorption Scheme for Optical Beam Tracking

    Science.gov (United States)

    Ortiz, Gerardo G.; Farr, William H.

    2011-01-01

    A new optical beam tracking approach for free-space optical communication links using two-photon absorption (TPA) in a high-bandgap detector material was demonstrated. This tracking scheme is part of the canonical architecture described in the preceding article. TPA is used to track a long-wavelength transmit laser while direct absorption on the same sensor simultaneously tracks a shorter-wavelength beacon. The TPA responsivity was measured for silicon using a PIN photodiode at a laser beacon wavelength of 1,550 nm. As expected, the responsivity shows a linear dependence with incident power level. The responsivity slope is 4.5 x 10(exp -7) A/W2. Also, optical beam spots from the 1,550-nm laser beacon were characterized on commercial charge coupled device (CCD) and complementary metal-oxide semiconductor (CMOS) imagers with as little as 13.7 microWatts of optical power (see figure). This new tracker technology offers an innovative solution to reduce system complexity, improve transmit/receive isolation, improve optical efficiency, improve signal-to-noise ratio (SNR), and reduce cost for free-space optical communications transceivers.

  1. Spectral dependences of extrinsic optical absorption in sillenite crystals

    Energy Technology Data Exchange (ETDEWEB)

    Kisteneva, M G; Khudyakova, E S; Shandarov, S M; Akrestina, A S; Dyu, V G [Tomsk State University of Control Systems and Radioelectronics, Tomsk (Russian Federation); Kargin, Yu F [A.A.Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences, Moscow (Russian Federation)

    2015-07-31

    The influence of laser irradiation at wavelengths of 532 and 655 nm and annealing in air at temperatures from 200 to 370 °C on optical absorption spectra of undoped bismuth silicon oxide and bismuth germanium oxide and aluminium-doped bismuth titanium oxide crystals has been studied experimentally. The experimental data have been interpreted in terms of a model for extrinsic absorption that takes into account not only the contribution of the photoexcitation of electrons from deep donor centres with a normal distribution of their concentration with respect to ionisation energy but also that of intracentre transitions. (laser applications and other topics in quantum electronics)

  2. Optical absorption of hyperbolic metamaterial with stochastic surfaces

    DEFF Research Database (Denmark)

    Liu, Jingjing; Naik, Gururaj V.; Ishii, Satoshi;

    2014-01-01

    We investigate the absorption properties of planar hyperbolic metamaterials (HMMs) consisting of metal-dielectric multilayers, which support propagating plane waves with anomalously large wavevectors and high photonic-density-of-states over a broad bandwidth. An interface formed by depositing ind...... of stochastically perturbed HMM compared to that of metal. (C) 2014 Optical Society of America...... indium-tin-oxide nanoparticles on an HMM surface scatters light into the high-k propagating modes of the metamaterial and reduces reflection. We compare the reflection and absorption from an HMM with the nanoparticle cover layer versus those of a metal film with the same thickness also covered...

  3. Optical absorption analysis and optimization of gold nanoshells.

    Science.gov (United States)

    Tuersun, Paerhatijiang; Han, Xiang'e

    2013-02-20

    Gold nanoshells, consisting of a nanoscale dielectric core coated with an ultrathin gold shell, have wide biomedical applications due to their strong optical absorption properties. Gold nanoshells with high absorption efficiencies can help to improve these applications. We investigate the effects of the core material, surrounding medium, core radius, and shell thickness on the absorption spectra of gold nanoshells by using the light-scattering theory of a coated sphere. Our results show that the position and intensity of the absorption peak can be tuned over a wide range by manipulating the above-mentioned parameters. We also obtain the optimal absorption efficiencies and structures of hollow gold nanoshells and gold-coated SiO(2) nanoshells embedded in water at wavelengths of 800, 820, and 1064 nm. The results show that hollow gold nanoshells possess the maximum absorption efficiency (5.42) at a wavelength of 800 nm; the corresponding shell thickness and core radius are 4.8 and 38.9 nm, respectively. They can be used as the ideal photothermal conversation particles for biomedical applications.

  4. Optimization of extraordinary optical absorption in plasmonic and dielectric structures

    DEFF Research Database (Denmark)

    Dühring, Maria Bayard; Sigmund, Ole

    2013-01-01

    Extraordinary optical absorption (EOA) can be obtained by plasmonic surface structuring. However, studies that compare the performance of these plasmonic devices with similar structured dielectric devices are rarely found in the literature. In this work we show different methods to enhance the EOA...... silicon layer for certain optical wavelengths compared to metal strips. It is then demonstrated that by topology optimization it is possible to generate nonintuitive surface designs that perform even better than the simple strip designs for both silicon and metals. These results indicate that in general...... by optimizing the geometry of the surface structuring for both plasmonic and dielectric devices, and the optimized performances are compared. Two different problem types with periodic structures are considered. The first case shows that strips of silicon on a surface can increase the absorption in an underlying...

  5. Nonlinear Optical Absorption of Organic Molecules for Applications in Optical Devices

    OpenAIRE

    Boni, Leonardo De; Daniel S. Correa; Mendonca, Cleber R.

    2010-01-01

    This chapter aimed to describe the resonant nonlinear optical properties of four important organic molecules: Chlorophyll A, Indocyanine Green, Ytterbium Bisphthalocyanine and Cytochrome C, which are materials that present interesting optical nonlinearities for applications in optical devices. It was shown that Chlorophyll A solution exhibits a RSA process for Q-switched and mode-locked laser pulses, with an intersystem-crossing time relatively fast and a triplet state cross section value twi...

  6. Determining the thermal neutron absorption cross section of rocks

    Energy Technology Data Exchange (ETDEWEB)

    Kreft, A.; Dydejczyk, A.; Gyurcsak, J.

    1984-07-01

    A new simple rapid and cost effective method of determining the thermal neutron absorption cross section of rocks is proposed. It uses samples of about 2 kg and a measuring set-up consisting of paraffin block, Pu-Be neutron source emitting roughly 5 x 10/sup 5/ n/s, BF/sub 3/ proportional counter and conventional counting equipment. The method has been tested with a set of 49 artificial samples and 95% confidence intervals of about 0.27 m/sup -1/ have been estimated for 2 x 300 s counting times. Measurements carried out for several basalt samples have been compared with results obtained by a pulsed neutron technique.

  7. Dual beam light profile microscopy: a new technique for optical absorption depth profilometry.

    Science.gov (United States)

    Power, J F; Fu, S W

    2004-02-01

    Light profile microscopy (LPM) is a recently developed technique of optical inspection that is used to record micrometer-scale images of thin-film cross-sections on a direct basis. In single beam mode, LPM provides image contrast based on luminescence, elastic, and/or inelastic scatter. However, LPM may also be used to depth profile the optical absorption coefficient of a thin film based on a method of dual beam irradiation presented in this work. The method uses a pair of collimated laser beams to consecutively irradiate a film from two opposing directions along the depth axis. An average profile of the beam's light intensity variation through the material is recovered for each direction and used to compute a depth-dependent differential absorbance profile. This latter quantity is shown from theory to be related to the film's depth-dependent optical absorption coefficient through a simple linear model that may be inverted by standard methods of numerical linear algebra. The inverse problem is relatively well posed, showing good immunity to data errors. This profilometry method is experimentally applied to a set of well-characterized materials with known absorption properties over a scale of tens of micrometers, and the reconstructed absorption profiles were found to be highly consistent with the reference data.

  8. Optical absorption signature of a self-assembled dye monolayer on graphene

    Directory of Open Access Journals (Sweden)

    Tessnim Sghaier

    2016-06-01

    Full Text Available A well-organized monolayer of alkylated perylene-3,4,9,10-tetracarboxylic-3,4,9,10-diimide (PTCDI has been formed onto CVD graphene transferred on a transparent substrate. Its structure has been probed by scanning tunnelling microscopy and its optical properties by polarized transmission spectroscopy at varying incidence. The results show that the transition dipoles of adsorbed PTCDI are all oriented parallel to the substrate. The maximum absorption is consistent with the measured surface density of molecules and their absorption cross section. The spectrum presents mainly a large red-shift of the absorption line compared with the free molecules dispersed in solution, whereas the relative strengths of the vibronic structures are preserved. These changes are attributed to non-resonant interactions with the graphene layer and the neighbouring molecules.

  9. In vivo photothermal optical coherence tomography for non-invasive imaging of endogenous absorption agents.

    Science.gov (United States)

    Makita, Shuichi; Yasuno, Yoshiaki

    2015-05-01

    In vivo photothermal optical coherence tomography (OCT) is demonstrated for cross-sectional imaging of endogenous absorption agents. In order to compromise the sensitivity, imaging speed, and sample motion immunity, a new photothermal detection scheme and phase processing method are developed. Phase-resolved swept-source OCT and fiber-pigtailed laser diode (providing excitation at 406 nm) are combined to construct a high-sensitivity photothermal OCT system. OCT probe and excitation beam coaxially illuminate and are focused on tissues. The photothermal excitation and detection procedure is designed to obtain high efficiency of photothermal effect measurement. The principle and method of depth-resolved cross-sectional imaging of absorption agents with photothermal OCT has been derived. The phase-resolved thermal expansion detection algorithm without motion artifact enables in vivo detection of photothermal effect. Phantom imaging with a blood phantom and in vivo human skin imaging are conducted. A phantom with guinea-pig blood as absorber has been scanned by the photothermal OCT system to prove the concept of cross-sectional absorption agent imaging. An in vivo human skin measurement is also performed with endogenous absorption agents.

  10. Optical absorption and fluorescence properties of Er3+ in sodium borate glass

    Indian Academy of Sciences (India)

    Y C Ratnakaram; J Lakshmi; R P S Chakradhar

    2005-08-01

    Spectroscopic properties of Er3+ ions in sodium borate glass have been studied. The indirect and direct optical band gaps (opt) and energy level parameters (Racah (1, 2 and 3), spin-orbit (4f) and configurational interaction ()) are evaluated. Spectral intensities for various absorption bands of Er3+ doped sodium borate glass are calculated. Using Judd–Ofelt intensity parameters (2, 4, 6), radiative transition probabilities (), branching ratios () and integrated absorption cross sections ( ) are reported for certain transitions. The radiative lifetimes (R) for different excited states are estimated. From the fluorescence spectra, the emission cross section (p) for the transition, ${}^{4}I_{13/2} \\rightarrow {}^{4}I_{15/2}$ is reported.

  11. Optical absorption and scattering spectroscopies of single nano-objects.

    Science.gov (United States)

    Crut, Aurélien; Maioli, Paolo; Del Fatti, Natalia; Vallée, Fabrice

    2014-06-07

    Developments of optical detection and spectroscopy methods for single nano-objects are key advances for applications and fundamental understanding of the novel properties exhibited by nanosize systems. These methods are reviewed, focusing on far-field optical approaches based on light absorption and elastic scattering. The principles of the main linear and nonlinear methods are described and experimental results are illustrated in the case of metal nanoparticles, stressing the key role played by the object environment, such as the presence of a substrate, bound surface molecules or other nano-objects. Special attention is devoted to quantitative methods and correlation of the measured optical spectra of a nano-object with its morphology, characterized either optically or by electron microscopy, as this permits precise comparison with theoretical models. Application of these methods to optical detection and spectroscopy for single semiconductor nanowires and carbon nanotubes is also presented. Extension to ultrafast nonlinear extinction or scattering spectroscopies of single nano-objects is finally discussed in the context of investigation of their nonlinear optical response and their electronic, acoustic and thermal properties.

  12. Electro-optic and Many-body Effects on Optical Absorption of Twisted Bilayer Graphene

    Science.gov (United States)

    Lee, Kan-Heng; Huang, Lujie; Kim, Cheol-Joo; Park, Jiwoong

    2015-03-01

    In twisted bilayer graphene (tBLG), the interlayer rotation angle between the two graphene layers induces additional angle-dependent van Hove singularities (vHSs) in its band structure where the two Dirac cones from each layer intersect. These vHSs introduce extra angle-dependent absorption peaks in the optical absorption spectra of tBLG. Here, we experimentally investigate the effects of the overall doping and the interlayer potential on these interlayer absorption features at various angles. We independently tune the doping concentration of each layer with a newly-developed, optically transparent, dual-gate transistor geometry to perform simultaneous optical and electrical measurements. Our data show strong electro-optic phenomena in the optical absorption of tBLG: the peak energy and width of the interlayer resonance feature sensitively depends on the overall doping and interlayer potential. We explain our observation using a simple band picture as well as many-body effects. Our study provides a powerful experimental platform for studying more complicated structures such as rotated tri- and multi-layer graphene systems in the future. Moreover, the understanding of electro-optic and many-body effects in these materials opens up a way for novel electrochromic devices.

  13. TL, EPR and optical absorption in natural grossular crystal

    Energy Technology Data Exchange (ETDEWEB)

    Yauri, J.M. [Institute of Physics, University of Sao Paulo, Rua do Matao, Travessa R, 187, CEP 05508-900, Sao Paulo (Brazil); Department of Physics, University of San Agustin, Av. Independencia S/N, Arequipa (Peru); Cano, N.F. [Institute of Physics, University of Sao Paulo, Rua do Matao, Travessa R, 187, CEP 05508-900, Sao Paulo (Brazil)], E-mail: nilocano@dfn.if.usp.br; Watanabe, S. [Institute of Physics, University of Sao Paulo, Rua do Matao, Travessa R, 187, CEP 05508-900, Sao Paulo (Brazil)

    2008-10-15

    Grossular is one of six members of silicate Garnet group. Two samples GI and GII have been investigated concerning their luminescence thermally stimulated (TL). EPR and optical absorption and the measurements were carried out to find out whether or not same point defects are responsible for all three properties. Although X-rays diffraction analysis has shown that both GI and GII have practically the same crystal structure of a standard grossular crystal, they presented different behavior in many aspects. The TL glow curve shape, TL response to radiation dose, the effect of annealing at high temperatures before irradiation, the dependence of UV bleaching parameters on peak temperature, all of them differ going from GI to GII. The EPR signals around g=2.0 as well as at g=4.3 and 6.0 have much larger intensity in GI than in GII. Very high temperature (>800 deg. C) annealing causes large increase in the bulk background absorption in GI, however, only very little in GII. In the cases of EPR and optical absorption, the difference in their behavior can be attributed to Fe{sup 3+} ions; however, in the TL case one cannot and the cause was not found as yet.

  14. Optical Absorption Spectra of Hydrous Wadsleyite to 32 GPa

    Science.gov (United States)

    Thomas, S.; Goncharov, A. F.; Jacobsen, S. D.; Bina, C. R.; Frost, D. J.

    2009-05-01

    Optical absorption spectra of high-pressure minerals can be used as indirect tools to calculate radiative conductivity of the Earth's interior [e.g., 1]. Recent high-pressure studies show that e.g. ringwoodite, γ-(Mg,Fe)2SiO4, does not become opaque in the near infrared and visible region, as previously assumed, but remains transparent to 21.5 GPa [2]. Therefore, it has been concluded that radiative heat transfer does not necessarily become blocked at high pressures of the mantle and ferromagnesian minerals actually could contribute to the heat flow in the Earth's interior [2]. In this study we use gem-quality single-crystals of hydrous Fe-bearing wadsleyite, β-(Mg,Fe)2SiO4, that were synthesized at 18 GPa and 1400 °C in a multianvil apparatus. Crystals were analyzed by Mössbauer and Raman spectroscopy, electron microprobe analysis and single-crystal X-ray diffraction. For absorption measurements a double-polished 50 μm sized single-crystal of wadsleyite was loaded in a diamond-anvil cell with neon as pressure medium. Optical absorption spectra were recorded at ambient conditions as well as up to 32 GPa from 400 to 50000 cm-1. At ambient pressure the absorption spectrum reveals two broad bands at - 10000 cm-1 and -15000 cm-1, and an absorption edge in the visible-ultraviolet range. With increasing pressure the absorption spectrum changes, both bands continuously shift to higher frequencies as has been observed for ringwoodite [2], but is contrary to earlier presumptions for wadsleyite [3]. Here, we will discuss band assignment along with the influence of iron, compare our results to previous absorption studies of mantle materials [2], and analyze possible implications for radiative conductivity of the transition zone. References: [1] Goncharov et al. (2008), McGraw Yearbook Sci. Tech., 242-245. [2] Keppler & Smyth (2005), Am. Mineral., 90 1209-1212. [3] Ross (1997), Phys. Chem. Earth, 22 113-118.

  15. Could the New Absorption Cross Section of J/psi Change the Aspect of Nuclear Absorption Mechanism

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The enlarged new absorption cross section of J/psi by pion and rho mesons were put into the hadron and string cascade model, JPCIAE, and the J/psi suppression factors in p-A, O-U, S-U and Pb-Pb minimum bias collisions at 200 AGeV/c were calculated with nuclear absorption mechanism only. The results seem to indicate that, with new enlarged cross section it is still hard to change the aspect that nuclear absorption itself could not easily account for the J/psi anomalous suppression in Pb-Pb collisions.

  16. Optical absorption and emission of nitrogen-doped silicon nanocrystals.

    Science.gov (United States)

    Pi, Xiaodong; Chen, Xiaobo; Ma, Yeshi; Yang, Deren

    2011-11-01

    Silicon nanocrystals (Si NCs) may be both unintentionally and intentionally doped with nitrogen (N) during their synthesis and processing. Since the importance of Si NCs largely originates from their remarkable optical properties, it is critical to understand the effect of N doping on the optical behavior of Si NCs. On the basis of theoretical calculations, we show that the doping of Si NCs with N most likely leads to the formation of paired interstitial N at the NC surface, which causes both the optical absorption and emission of Si NCs to redshift. But these redshifts are smaller than those induced by doubly bonded O at the NC surface. It is found that high radiative recombination rates can be reliably obtained for Si NCs with paired interstitial N at the NC surface. The current results not only help to understand the optical behavior of Si NCs synthesized and processed in N-containing environments, but also inspire intentional N doping as an additional means to control the optical properties of Si NCs.

  17. Two-photon Absorption and Nonlinear Optical Properties of A New Organic Dye DEASPI

    Institute of Scientific and Technical Information of China (English)

    Guangyong ZHOU; Xiaomei WANG; Dong WANG; Chun WANG; Xian ZHAO; Zongshu SHAO; Minhua JIANG

    2001-01-01

    A new organic dye trans-4- [p-(N,N-diethylamino) styryl ]-N-methylpyridinium iodide (abbreviatedas DEASPI thereafter) with large two-photon absorption (TPA) cross section and excellent upconverted lasing properties was synthesized. The melting point and decompound point were measured to be 230℃ and 264.7℃ respectively. The molecular TPA cross section was meaThe linear and nonlinear optical properties of this dye were systematically studied. The highest net upconversion efficiency from the absorbed pump energy to the output upconverted lasing energy is as high as 18.6% at the pump energy of 2.17 mJ from a mode-locked Nd:YAG ps laser.The nonlinear transmittance at the wavelengths from 720 to 1100 nm was measured. The dye solution also shows a clear optical power limiting effect.

  18. Optical absorption in commercial single mode optical fibres for the LHC machine

    CERN Document Server

    Wijnands, T J; Kuhnhenn, J; Hoeffgen, S K; Weinand, U; TS

    2007-01-01

    The optical absorption of light at 1310 nm and 1550 nm in various commercially available Single Mode (SM) fibres samples has been studied. The absorption was measured as a function of dose, dose rate, temperature and light power. The samples were irradiated with gamma rays from a 60Co source and exposed to a complex radiation field from high energy physics. One fibre sample with an F-doped core exhibits extreme low absorption of light at 1310 nm during irradiation up to doses of at least 100 kGy.

  19. Correlated theory of linear optical absorption of octacene and nonacene

    Science.gov (United States)

    Chakraborty, Himanshu; Shukla, Alok

    2013-08-01

    The technological importance of higher acenes has led to resurgence of interest in synthesizing higher acenes such as octacene, nonacene etc. Recently, Tönshoff and Bettinger [2010 Angew. Chem. Int. Ed. 49 4125] have synthesized octacene and nonacene. Motivated by their work, we have performed large-scale calculations of linear optical absorption of octacene and nonacene. Methodology adopted in our work is based upon Pariser-Parr-Pople model (PPP) Hamiltonian, along with large-scale multi-reference singles-doubles configuration interaction (MRSDCI) approach.

  20. Imaging photothermal microscopy for absorption measurements of optical coatings

    Institute of Scientific and Technical Information of China (English)

    Chunxian Tao; Yuanan Zhao; Hongbo He; Dawei Li; Jianda Shao; Zhengxiu Fan

    2009-01-01

    @@ For absorption measurement of large-aperture optical coatings, a novel method of imaging photothermal microscopy based on image lock-in technique is presented.Detailed theoretical analysis and numerical calculation are made based on the image photothermal technique.The feasibility of this imaging method is proved through the coincidence between the theoretical results of single spot method and multi-channel method.The measuring speed of this imaging method can be increased hundreds of times compared with that of the raster scanning.This technique can expand the applications of photothermal technique.

  1. All-optical reservoir computer based on saturation of absorption.

    Science.gov (United States)

    Dejonckheere, Antoine; Duport, François; Smerieri, Anteo; Fang, Li; Oudar, Jean-Louis; Haelterman, Marc; Massar, Serge

    2014-05-05

    Reservoir computing is a new bio-inspired computation paradigm. It exploits a dynamical system driven by a time-dependent input to carry out computation. For efficient information processing, only a few parameters of the reservoir needs to be tuned, which makes it a promising framework for hardware implementation. Recently, electronic, opto-electronic and all-optical experimental reservoir computers were reported. In those implementations, the nonlinear response of the reservoir is provided by active devices such as optoelectronic modulators or optical amplifiers. By contrast, we propose here the first reservoir computer based on a fully passive nonlinearity, namely the saturable absorption of a semiconductor mirror. Our experimental setup constitutes an important step towards the development of ultrafast low-consumption analog computers.

  2. Mathematical Model of Fiber Optic Temperature Sensor Based on Optic Absorption and Experiment Testing

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    On the basis of analysis on the temperature monitoring methods for high voltage devices, a new type of fiber optic sensor structure with reference channel is given. And the operation principle of fiber optic sensor is analysed at large based on the absorption of semiconductor chip. The mathematical model of both devices and the whole system are also given. It is proved by the experiment that this mathematical model is reliable.

  3. Initial Results of Optical Vortex Laser Absorption Spectroscopy in the HYPER-I Device

    Science.gov (United States)

    Yoshimura, Shinji; Asai, Shoma; Aramaki, Mitsutoshi; Terasaka, Kenichiro; Ozawa, Naoya; Tanaka, Masayoshi; Morisaki, Tomohiro

    2015-11-01

    Optical vortex beams have a potential to make a new Doppler measurement, because not only parallel but perpendicular movement of atoms against the beam axis causes the Doppler shift of their resonant absorption frequency. As the first step of a proof-of-principle experiment, we have performed the optical vortex laser absorption spectroscopy for metastable argon neutrals in an ECR plasma produced in the HYPER-I device at the National Institute for Fusion Science, Japan. An external cavity diode laser (TOPTICA, DL100) of which center wavelength was 696.735 nm in vacuum was used for the light source. The Hermite-Gaussian (HG) beam was converted into the Laguerre-Gaussian (LG) beam (optical vortex) by a computer-generated hologram displayed on the spatial light modulator (Hamamatsu, LCOS-SLM X10468-07). In order to make fast neutral flow across the LG beam, a high speed solenoid valve system was installed on the HYPER-I device. Initial results including the comparison of absorption spectra for HG and LG beams will be presented. This study was supported by NINS young scientists collaboration program for cross-disciplinary study, NIFS collaboration research program (NIFS13KOAP026), and JSPS KAKENHI grant number 15K05365.

  4. Optical humidity detection based on tunable diode laser absorption spectroscopy

    Science.gov (United States)

    Zhang, Keke; Liu, Shixuan; Chen, Shizhe; Zhao, Qiang; Zhang, Lijuan; Li, Xuanqun; Wang, Wenyan; Wu, Yushang

    2017-02-01

    Humidity is an important environmental parameter, which is difficult to be measured accurately and quickly using traditional measurement methods. Under the environment of low temperature or high humidity, traditional humidity and temperature sensor has shortages in humidity measurement accuracy, corresponding time and wet fade speed. To solve these problems, this paper proposes a method to measure the environmental humidity with wavelength modulation technology and harmonic detection technology based on tunable diode laser absorption spectroscopy. H2O molecular absorption line near 1392 nm is selected as the characteristic spectra. The effects of temperature, pressure and water concentration on the absorption spectrum width, the wavelength modulation coefficient and the amplitude of the harmonic signal are analyzed. Humidity and temperature sensor is modified using temperature and pressure compensation model, and the influence of the water concentration variation is eliminated by the iterative algorithm. The new humidity and temperature sensor prototype is developed, and the structure of the optical system is simple, which is easy to be adjusted. The response frequency of the humidity detection is 40 Hz. The experiment was carried out for 3 months at Qingdao national basic weather station. Experimental results show that the consistency of the humidity and temperature data is very good, which can proves the validity of the humidity measurement technology.

  5. Measurements of the absorption cross section of (13)CHO(13)CHO at visible wavelengths and application to DOAS retrievals.

    Science.gov (United States)

    Goss, Natasha R; Waxman, Eleanor M; Coburn, Sean C; Koenig, Theodore K; Thalman, Ryan; Dommen, Josef; Hannigan, James W; Tyndall, Geoffrey S; Volkamer, Rainer

    2015-05-14

    The trace gas glyoxal (CHOCHO) forms from the atmospheric oxidation of hydrocarbons and is a precursor to secondary organic aerosol. We have measured the absorption cross section of disubstituted (13)CHO(13)CHO ((13)C glyoxal) at moderately high (1 cm(-1)) optical resolution between 21 280 and 23 260 cm(-1) (430-470 nm). The isotopic shifts in the position of absorption features were found to be largest near 455 nm (Δν = 14 cm(-1); Δλ = 0.29 nm), whereas no significant shifts were observed near 440 nm (Δν < 0.5 cm(-1); Δλ < 0.01 nm). These shifts are used to investigate the selective detection of (12)C glyoxal (natural isotope abundance) and (13)C glyoxal by in situ cavity enhanced differential optical absorption spectroscopy (CE-DOAS) in a series of sensitivity tests using synthetic spectra, and laboratory measurements of mixtures containing (12)C and (13)C glyoxal, nitrogen dioxide, and other interfering absorbers. We find the changes in apparent spectral band shapes remain significant at the moderately high optical resolution typical of CE-DOAS (0.55 nm fwhm). CE-DOAS allows for the selective online detection of both isotopes with detection limits of ∼200 pptv (1 pptv = 10(-12) volume mixing ratio), and sensitivity toward total glyoxal of few pptv. The (13)C absorption cross section is available for download from the Supporting Information.

  6. Gas-phase absorption cross sections of 24 monocyclic aromatic hydrocarbons in the UV and IR spectral ranges

    Science.gov (United States)

    Etzkorn, Thomas; Klotz, Björn; Sørensen, Søren; Patroescu, Iulia V.; Barnes, Ian; Becker, Karl H.; Platt, Ulrich

    Absorption cross sections of 24 volatile and non-volatile derivatives of benzene in the ultraviolet (UV) and the infrared (IR) regions of the electromagnetic spectrum have been determined using a 1080 l quartz cell. For the UV a 0.5 m Czerny-Turner spectrometer coupled with a photodiode array detector (spectral resolution 0.15 nm) was used. IR spectra were recorded with an FT-IR spectrometer (Bruker IFS-88, spectral resolution 1 cm -1). Absolute absorption cross sections and the instrument function are given for the UV, while for the IR, absorption cross sections and integrated band intensities are reported. The study focused primarily on the atmospherically relevant methylated benzenes (benzene, toluene, o-xylene, m-xylene, p-xylene, 1,2,4-trimethylbenzene, 1,3,5-trimethylbenzene, ethylbenzene, styrene) and their ring retaining oxidation products (benzaldehyde, o-tolualdehyde, m-tolualdehyde, p-tolualdehyde, phenol, o-cresol, m-cresol, p-cresol, 2,3-dimethylphenol, 2,4-dimethylphenol, 2,5-dimethylphenol, 2,6-dimethylphenol, 3,4-dimethylphenol, 3,5-dimethylphenol, 2,4,6-trimethylphenol and ( E,Z)- and ( E,E)-2,4-hexadienedial). The UV absorption cross sections reported here can be used for the evaluation of DOAS spectra (Differential Optical Absorption Spectroscopy) for measurements of the above compounds in the atmosphere and in reaction chambers, while the IR absorption cross sections will primarily be useful in laboratory studies on atmospheric chemistry, where FT-IR spectrometry is an important tool.

  7. Hybrid Microfluidic Platform for Multifactorial Analysis Based on Electrical Impedance, Refractometry, Optical Absorption and Fluorescence

    National Research Council Canada - National Science Library

    Pereira, Fábio; Bernacka-Wojcik, Iwona; Ribeiro, Rita; Lobato, Maria; Fortunato, Elvira; Martins, Rodrigo; Igreja, Rui; Jorge, Pedro; Águas, Hugo; Oliva, Abel

    2016-01-01

    ...: electrical impedance, refractometry, optical absorption and fluorescence. We present the rationale for the design and the details of the microfabrication of this multifactorial hybrid microfluidic chip...

  8. Absorption of optical power in an S-20 photocathode

    CERN Document Server

    Harmer, S W

    2003-01-01

    By considering a monochromatic plane wave obliquely incident upon a planar layer of S-20 photocathode material, deposited upon a non-absorbing glass substrate, the distribution of optical power absorbed within the layer can be resolved. This is important to the question of photocathode efficiency, as the absorbed light excites photoelectrons within the photocathode which then may pass from the photocathode into the vacuum of the photomultiplier tube and be collected and multiplied. The calculation uses the measured complex permittivity of an extended red S-20 photocathode in the wavelength range, 375-900 nm. The results show that thin film effects are important within the photocathode, as they give rise to interesting power absorption profiles. This information is invaluable in predicting optimum photocathode thickness for wavelength selective applications. Electromagnetic waves that are obliquely incident upon the photocathode are also considered in both transverse electric and transverse magnetic polarizati...

  9. Optical re-injection in cavity-enhanced absorption spectroscopy.

    Science.gov (United States)

    Leen, J Brian; O'Keefe, Anthony

    2014-09-01

    Non-mode-matched cavity-enhanced absorption spectrometry (e.g., cavity ringdown spectroscopy and integrated cavity output spectroscopy) is commonly used for the ultrasensitive detection of trace gases. These techniques are attractive for their simplicity and robustness, but their performance may be limited by the reflection of light from the front mirror and the resulting low optical transmission. Although this low transmitted power can sometimes be overcome with higher power lasers and lower noise detectors (e.g., in the near-infrared), many regimes exist where the available light intensity or photodetector sensitivity limits instrument performance (e.g., in the mid-infrared). In this article, we describe a method of repeatedly re-injecting light reflected off the front mirror of the optical cavity to boost the cavity's circulating power and deliver more light to the photodetector and thus increase the signal-to-noise ratio of the absorption measurement. We model and experimentally demonstrate the method's performance using off-axis cavity ringdown spectroscopy (OA-CRDS) with a broadly tunable external cavity quantum cascade laser. The power coupled through the cavity to the detector is increased by a factor of 22.5. The cavity loss is measured with a precision of 2 × 10(-10) cm(-1)/√Hz; an increase of 12 times over the standard off-axis configuration without reinjection and comparable to the best reported sensitivities in the mid-infrared. Finally, the re-injected CRDS system is used to measure the spectrum of several volatile organic compounds, demonstrating the improved ability to resolve weakly absorbing spectroscopic features.

  10. Optical re-injection in cavity-enhanced absorption spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Leen, J. Brian, E-mail: b.leen@lgrinc.com; O’Keefe, Anthony [Los Gatos Research, 67 E. Evelyn Avenue, Suite 3, Mountain View, California 94041 (United States)

    2014-09-15

    Non-mode-matched cavity-enhanced absorption spectrometry (e.g., cavity ringdown spectroscopy and integrated cavity output spectroscopy) is commonly used for the ultrasensitive detection of trace gases. These techniques are attractive for their simplicity and robustness, but their performance may be limited by the reflection of light from the front mirror and the resulting low optical transmission. Although this low transmitted power can sometimes be overcome with higher power lasers and lower noise detectors (e.g., in the near-infrared), many regimes exist where the available light intensity or photodetector sensitivity limits instrument performance (e.g., in the mid-infrared). In this article, we describe a method of repeatedly re-injecting light reflected off the front mirror of the optical cavity to boost the cavity's circulating power and deliver more light to the photodetector and thus increase the signal-to-noise ratio of the absorption measurement. We model and experimentally demonstrate the method's performance using off-axis cavity ringdown spectroscopy (OA-CRDS) with a broadly tunable external cavity quantum cascade laser. The power coupled through the cavity to the detector is increased by a factor of 22.5. The cavity loss is measured with a precision of 2 × 10{sup −10} cm{sup −1}/√(Hz;) an increase of 12 times over the standard off-axis configuration without reinjection and comparable to the best reported sensitivities in the mid-infrared. Finally, the re-injected CRDS system is used to measure the spectrum of several volatile organic compounds, demonstrating the improved ability to resolve weakly absorbing spectroscopic features.

  11. Nanofluid optical property characterization: towards efficient direct absorption solar collectors.

    Science.gov (United States)

    Taylor, Robert A; Phelan, Patrick E; Otanicar, Todd P; Adrian, Ronald; Prasher, Ravi

    2011-03-15

    Suspensions of nanoparticles (i.e., particles with diameters nanofluids, show remarkable thermal and optical property changes from the base liquid at low particle loadings. Recent studies also indicate that selected nanofluids may improve the efficiency of direct absorption solar thermal collectors. To determine the effectiveness of nanofluids in solar applications, their ability to convert light energy to thermal energy must be known. That is, their absorption of the solar spectrum must be established. Accordingly, this study compares model predictions to spectroscopic measurements of extinction coefficients over wavelengths that are important for solar energy (0.25 to 2.5 μm). A simple addition of the base fluid and nanoparticle extinction coefficients is applied as an approximation of the effective nanofluid extinction coefficient. Comparisons with measured extinction coefficients reveal that the approximation works well with water-based nanofluids containing graphite nanoparticles but less well with metallic nanoparticles and/or oil-based fluids. For the materials used in this study, over 95% of incoming sunlight can be absorbed (in a nanofluid thickness ≥10 cm) with extremely low nanoparticle volume fractions - less than 1 × 10-5, or 10 parts per million. Thus, nanofluids could be used to absorb sunlight with a negligible amount of viscosity and/or density (read: pumping power) increase.

  12. Nanofluid optical property characterization: towards efficient direct absorption solar collectors

    Directory of Open Access Journals (Sweden)

    Otanicar Todd

    2011-01-01

    Full Text Available Abstract Suspensions of nanoparticles (i.e., particles with diameters < 100 nm in liquids, termed nanofluids, show remarkable thermal and optical property changes from the base liquid at low particle loadings. Recent studies also indicate that selected nanofluids may improve the efficiency of direct absorption solar thermal collectors. To determine the effectiveness of nanofluids in solar applications, their ability to convert light energy to thermal energy must be known. That is, their absorption of the solar spectrum must be established. Accordingly, this study compares model predictions to spectroscopic measurements of extinction coefficients over wavelengths that are important for solar energy (0.25 to 2.5 μm. A simple addition of the base fluid and nanoparticle extinction coefficients is applied as an approximation of the effective nanofluid extinction coefficient. Comparisons with measured extinction coefficients reveal that the approximation works well with water-based nanofluids containing graphite nanoparticles but less well with metallic nanoparticles and/or oil-based fluids. For the materials used in this study, over 95% of incoming sunlight can be absorbed (in a nanofluid thickness ≥10 cm with extremely low nanoparticle volume fractions - less than 1 × 10-5, or 10 parts per million. Thus, nanofluids could be used to absorb sunlight with a negligible amount of viscosity and/or density (read: pumping power increase.

  13. Nanofluid optical property characterization: towards efficient direct absorption solar collectors

    Science.gov (United States)

    Taylor, Robert A.; Phelan, Patrick E.; Otanicar, Todd P.; Adrian, Ronald; Prasher, Ravi

    2011-12-01

    Suspensions of nanoparticles (i.e., particles with diameters nanofluids, show remarkable thermal and optical property changes from the base liquid at low particle loadings. Recent studies also indicate that selected nanofluids may improve the efficiency of direct absorption solar thermal collectors. To determine the effectiveness of nanofluids in solar applications, their ability to convert light energy to thermal energy must be known. That is, their absorption of the solar spectrum must be established. Accordingly, this study compares model predictions to spectroscopic measurements of extinction coefficients over wavelengths that are important for solar energy (0.25 to 2.5 μm). A simple addition of the base fluid and nanoparticle extinction coefficients is applied as an approximation of the effective nanofluid extinction coefficient. Comparisons with measured extinction coefficients reveal that the approximation works well with water-based nanofluids containing graphite nanoparticles but less well with metallic nanoparticles and/or oil-based fluids. For the materials used in this study, over 95% of incoming sunlight can be absorbed (in a nanofluid thickness ≥10 cm) with extremely low nanoparticle volume fractions - less than 1 × 10-5, or 10 parts per million. Thus, nanofluids could be used to absorb sunlight with a negligible amount of viscosity and/or density (read: pumping power) increase.

  14. Scattered light and accuracy of the cross-section measurements of weak absorptions: Gas and liquid phase UV absorption cross sections of CH3CFCl2

    Science.gov (United States)

    Fahr, A.; Braun, W.; Kurylo, M. J.

    1993-01-01

    Ultraviolet absorption cross sections of CH3CFCl2(HCFC-141b) were determined in the gas phase (190-260 nm) and liquid phase (230-260 mm) at 298 K. The liquid phase absorption cross sections were then converted into accurate gas phase values using a previously described procedure. It has been demonstrated that scattered light from the shorter-wavelength region (as little as several parts per thousand) can seriously compromise the absorption cross-section measurement, particularly at longer wavelengths where cross sections are low, and can be a source of discrepancies in the cross sections of weakly absorbing halocarbons reported in the literature. A modeling procedure was developed to assess the effect of scattered light on the measured absorption cross section in our experiments, thereby permitting appropriate corrections to be made on the experimental values. Modeled and experimental results were found to be in good agreement. Experimental results from this study were compared with other available determinations and provide accurate input for calculating the atmospheric lifetime of HCFC-141b.

  15. ANISOTROPY OF OPTICAL ABSORPTION INTENSITY IN Tm3+ DOPED YVO4 CRYSTALS

    Institute of Scientific and Technical Information of China (English)

    LIN XIU-HUA; JIANG BING-XI

    2000-01-01

    Seven absorption group-bands (1D2, 1G4, 3F2, 3F3, 3H4, 3H5, 3F4) of Tm3+ in YVO4 single crystals have been observed in the orientation absorption spectra recorded in the spectral range from 200 to 4000 nm at 300K.The integrated absorption cross section for each group-band was accurately evaluated. On the assumption that the anisotropy of this uni-axial crystal is small, the Judd-Ofelt theory was extended for the calculation of 4f-4f transition intensities of Tm3+ in YVO4. Two sets of phenomenological intensity parameters were derived from a least-squares-fit procedure. For c-axis cut sample we have Ω2=10.18 (10-20cm2), Ω4=1.96 (10-20cm2), Ω6=0.75 (10-20cm2). For a-axis cut sample we have Ω2 = 8.20 (10-20cm2), Ω4 = 2.47 (10-20cm2), Ω6 = 0.91 (10-20cm2). The anisotropy of the optical absorption intensities of Tm3+:YVO4 was theoretically analyzed in detail.

  16. Nonlinear absorption and optical limiting in Duran glass induced by 800 nm femtosecond laser pulses

    Energy Technology Data Exchange (ETDEWEB)

    Jamshidi-Ghaleh, Kazem [Department of Physics, Azerbaijan University of Tarbiat Moallem, Tabriz (Iran, Islamic Republic of); Mansour, Nastaran [Department of Physics, Shahi Beheshti University, Tehran (Iran, Islamic Republic of)

    2007-01-21

    Nonlinear absorption of Duran glass by irradiation of a focused 200 fs pulsed laser were investigated using the z-scan technique at 800 nm. Optical limiting behaviour in this glass has also been measured. The limiting threshold was measured to 33 {mu}J pulse energy (peak intensity of 2.4 x 10{sup 12} W cm{sup -2}) in this sample. The decrease in transmitted intensity is around 75% compared with the theoretical linear transmission for incident pulses pulse energies 320 {mu}J (peak intensity of 5 x 10{sup 12} W cm{sup -2}). A comparison of the theoretical analyses with the experimental results shows that three-photon absorption and three-photon generated free-carrier absorption within the glasses are the main mechanisms for the observed nonlinear response. The values of the three-photon absorption coefficient and the photo-generated free-carrier cross section are measured as {gamma} = 2 x 10{sup -24}cm{sup 3} W{sup -2} and {sigma} = 1.2 x 10{sup -18} cm{sup 2}, respectively.

  17. Quantum and classical optics of dispersive and absorptive structured media

    Science.gov (United States)

    Bhat, Navin Andrew Rama

    This thesis presents a Hamiltonian formulation of the electromagnetic fields in structured (inhomogeneous) media of arbitrary dimensionality, with arbitrary material dispersion and absorption consistent with causality. The method is based on an identification of the photonic component of the polariton modes of the system. Although the medium degrees of freedom are introduced in an oscillator model, only the macroscopic response of the medium appears in the derived eigenvalue equation for the polaritons. For both the discrete transparent-regime spectrum and the continuous absorptive-regime spectrum, standard codes for photonic modes in nonabsorptive systems can easily be leveraged to calculate polariton modes. Two applications of the theory are presented: pulse propagation and spontaneous parametric down-conversion (SPDC). In the propagation study, the dynamics of the nonfluctuating part of a classical-like pulse are expressed in terms of a Schrodinger equation for a polariton effective field. The complex propagation parameters of that equation can be obtained from the same generalized dispersion surfaces typically used while neglecting absorption, without incurring additional computational complexity. As an example I characterize optical pulse propagation in an Au/MgF 2 metallodielectric stack, using the empirical response function, and elucidate the various roles of Bragg scattering, interband absorption and field expulsion. Further, I derive the Beer coefficient in causal structured media. The SPDC calculation is rigorous, captures the full 3D physics, and properly incorporates linear dispersion. I obtain an expression for the down-converted state, quantify pair-production properties, and characterize the scaling behavior of the SPDC energy. Dispersion affects the normalization of the polariton modes, and calculations of the down-conversion efficiency that neglect this can be off by 100% or more for common media regardless of geometry if the pump is near the band

  18. Mechanism of resonant perfect optical absorption in dielectric film supporting metallic grating structures.

    Science.gov (United States)

    Chen, Xiumei; Yan, Xiaopeng; Li, Ping; Mou, Yongni; Wang, Wenqiang; Guan, Zhiqiang; Xu, Hongxing

    2016-08-22

    The mechanism of resonant perfect optical absorbers is quantitatively revealed by the coupled mode method for the air/grating/dielectric film/air four region system. The sufficient and necessary conditions of the perfect optical absorption are derived from the interface scattering coefficients analyses. The coupling of the Fabry-Perot modes in the grating slits and non-zero order quasi waveguide modes in the dielectric film play a key role for the perfect optical absorption when the light is incident from the grating side. The analytical sufficient and necessary conditions of the perfect optical absorption provide an efficient tool towards geometry design for the perfect optical absorption at the specific wavelengths. The advantages of a widely tunable perfect optical absorption wavelength, a high Q factor and the confined energy loss on metal surfaces make the air/grating/film/air structures promising for applications in sensing, modulation and detection.

  19. Absorption Cross Section of Static Einstein-Maxwell Dilation Axion Black Hole for Scalar Particles

    Institute of Scientific and Technical Information of China (English)

    LIU Chang-Qing; JING Ji-Liang

    2007-01-01

    The absorption cross section of the static Einstein-Maxwell dilaton axion (EMDA) black hole for scalar particles is investigated.It is shown that the ratio of the absorption cross section of the EMDA black hole to that of the Schwarzschild black hole decreases as the absolute value of the dilaton increases,and it becomes zero as the dilaton tends to its extremal value.It is also shown that the absorption cross section decreases as both the v and the absolute value of the dilaton increase,and it decreases as the mass of the particle decreases.

  20. Absorption Cross Section of Einstein-Maxwell Dilation Axion Black Hole for Dirac Particles

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The absorption cross section of the Einstein-Maxwell Dilaton Axion (EMDA) black hole for Dirac particles is investigated. It is shown that the absorption cross section decreases as both the v and the absolute value of the dilaton increase, but it increases as the mass of the particle increases. It is also shown that the absorption cross section for the masslcss Dirac particles is 1/8 of the area of the horizon, which may be an universal property for minimally coupled massless Dirac particles.

  1. Quasinormal modes, stability analysis and absorption cross section for 4-dimensional topological Lifshitz black hole

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez, P.A. [Universidad Central de Chile, Escuela de Ingenieria Civil en Obras Civiles, Facultad de Ciencias Fisicas y Matematicas, Santiago (Chile); Universidad Diego Portales, Santiago (Chile); Moncada, Felipe; Vasquez, Yerko [Universidad de La Frontera, Departamento de Ciencias Fisicas, Facultad de Ingenieria, Ciencias y Administracion, Temuco (Chile)

    2012-12-15

    We study scalar perturbations in the background of a topological Lifshitz black hole in four dimensions. We compute analytically the quasinormal modes and from these modes we show that topological Lifshitz black hole is stable. On the other hand, we compute the reflection and transmission coefficients and the absorption cross section and we show that there is a range of modes with high angular momentum which contributes to the absorption cross section in the low frequency limit. Furthermore, in this limit, we show that the absorption cross section decreases if the scalar field mass increases, for a real scalar field mass. (orig.)

  2. Measurements of the mass absorption cross section of atmospheric soot particles using Raman spectroscopy

    Science.gov (United States)

    Nordmann, S.; Birmili, W.; Weinhold, K.; Müller, K.; Spindler, G.; Wiedensohler, A.

    2013-11-01

    Soot particles are a major absorber of shortwave radiation in the atmosphere. The mass absorption cross section is an essential quantity to describe this light absorption process. This work presents new experimental data on the mass absorption cross section of soot particles in the troposphere over Central Europe. Mass absorption cross sections were derived as the ratio between the light absorption coefficient determined by multiangle absorption photometry (MAAP) and the soot mass concentration determined by Raman spectroscopy. The Raman method is sensitive to graphitic structures present in the particle samples and was calibrated in the laboratory using Printex®90 model particles. Mass absorption cross sections were determined for a number of seven observation sites, ranging between 3.9 and 7.4 m2 g-1depending on measurement site and observational period. The highest values were found in a continentally aged air mass in winter, where soot particles were assumed to be mainly internally mixed. Our values are in the lower range of previously reported values, possibly due to instrumental differences to the former photometer and mass measurements. Overall, a value of 5.3m2 g-1from orthogonal regression over all samples is considered to be representative for the soot mass absorption cross section in the troposphere over Central Europe.

  3. Accurate laser measurements of ozone absorption cross-sections in the Hartley band

    Directory of Open Access Journals (Sweden)

    J. Viallon

    2014-08-01

    Full Text Available Ozone plays a crucial role in tropospheric chemistry, is the third largest contributor to greenhouse radiative forcing after carbon dioxide and methane and also a toxic air pollutant affecting human health and agriculture. Long-term measurements of tropospheric ozone have been performed globally for more than 30 years with UV photometers, all relying on the absorption of ozone at the 253.65 nm line of mercury. We have re-determined this cross-section and report a value of 11.27 × 10−18 cm2 molecule−1 with an expanded relative uncertainty of 0.84 %. This is lower than the conventional value currently in use and measured by Hearn in 1961 with a relative difference of 1.8%, with the consequence that historically reported ozone concentrations should be increased by 1.8%. In order to perform the new measurements of cross sections with reduced uncertainties, a system to generate pure ozone in the gas phase together with an optical system based on a UV laser with lines in the Hartley band, including accurate path length measurement of the absorption cell and a careful evaluation of possible impurities in the ozone sample by mass spectrometry and Fourier Transform Infrared spectroscopy was setup. This resulted in new measurements of absolute values of ozone absorption cross sections of 9.48 × 10−18, 10.44 × 10−18, and 11.07 × 10−18 cm2 molecule−1, with relative expanded uncertainties better than 0.6%, for the wavelengths (in vacuum of 244.062, 248.32, and 257.34 nm respectively. The cross-section at the 253.65 nm line of mercury was determined by comparisons using a Standard Reference Photometer equipped with a mercury lamp as the light source. The newly reported value should be used in the future to obtain the most accurate measurements of ozone concentration, which are in closer agreement with non UV photometry based methods such as the gas phase titration of ozone with nitrogen monoxide.

  4. Accurate measurements of ozone absorption cross-sections in the Hartley band

    Science.gov (United States)

    Viallon, J.; Lee, S.; Moussay, P.; Tworek, K.; Petersen, M.; Wielgosz, R. I.

    2015-03-01

    Ozone plays a crucial role in tropospheric chemistry, is the third largest contributor to greenhouse radiative forcing after carbon dioxide and methane and also a toxic air pollutant affecting human health and agriculture. Long-term measurements of tropospheric ozone have been performed globally for more than 30 years with UV photometers, all relying on the absorption of ozone at the 253.65 nm line of mercury. We have re-determined this cross-section and report a value of 11.27 x 10-18 cm2 molecule-1 with an expanded relative uncertainty of 0.86% (coverage factor k= 2). This is lower than the conventional value currently in use and measured by Hearn (1961) with a relative difference of 1.8%, with the consequence that historically reported ozone concentrations should be increased by 1.8%. In order to perform the new measurements of cross-sections with reduced uncertainties, a system was set up to generate pure ozone in the gas phase together with an optical system based on a UV laser with lines in the Hartley band, including accurate path length measurement of the absorption cell and a careful evaluation of possible impurities in the ozone sample by mass spectrometry and Fourier transform infrared spectroscopy. This resulted in new measurements of absolute values of ozone absorption cross-sections of 9.48 x 10-18, 10.44 x 10-18 and 11.07 x 10-18 cm2 molecule-1, with relative expanded uncertainties better than 0.7%, for the wavelengths (in vacuum) of 244.06, 248.32, and 257.34 nm respectively. The cross-section at the 253.65 nm line of mercury was determined by comparisons using a Standard Reference Photometer equipped with a mercury lamp as the light source. The newly reported value should be used in the future to obtain the most accurate measurements of ozone concentration, which are in closer agreement with non-UV-photometry based methods such as the gas phase titration of ozone with nitrogen monoxide.

  5. Accurate laser measurements of ozone absorption cross-sections in the Hartley band

    Science.gov (United States)

    Viallon, J.; Lee, S.; Moussay, P.; Tworek, K.; Petersen, M.; Wielgosz, R. I.

    2014-08-01

    Ozone plays a crucial role in tropospheric chemistry, is the third largest contributor to greenhouse radiative forcing after carbon dioxide and methane and also a toxic air pollutant affecting human health and agriculture. Long-term measurements of tropospheric ozone have been performed globally for more than 30 years with UV photometers, all relying on the absorption of ozone at the 253.65 nm line of mercury. We have re-determined this cross-section and report a value of 11.27 × 10-18 cm2 molecule-1 with an expanded relative uncertainty of 0.84 %. This is lower than the conventional value currently in use and measured by Hearn in 1961 with a relative difference of 1.8%, with the consequence that historically reported ozone concentrations should be increased by 1.8%. In order to perform the new measurements of cross sections with reduced uncertainties, a system to generate pure ozone in the gas phase together with an optical system based on a UV laser with lines in the Hartley band, including accurate path length measurement of the absorption cell and a careful evaluation of possible impurities in the ozone sample by mass spectrometry and Fourier Transform Infrared spectroscopy was setup. This resulted in new measurements of absolute values of ozone absorption cross sections of 9.48 × 10-18, 10.44 × 10-18, and 11.07 × 10-18 cm2 molecule-1, with relative expanded uncertainties better than 0.6%, for the wavelengths (in vacuum) of 244.062, 248.32, and 257.34 nm respectively. The cross-section at the 253.65 nm line of mercury was determined by comparisons using a Standard Reference Photometer equipped with a mercury lamp as the light source. The newly reported value should be used in the future to obtain the most accurate measurements of ozone concentration, which are in closer agreement with non UV photometry based methods such as the gas phase titration of ozone with nitrogen monoxide.

  6. Optical torque on a magneto-dielectric Rayleigh absorptive sphere by a vector Bessel (vortex) beam

    Science.gov (United States)

    Li, Renxian; Yang, Ruiping; Ding, Chunying; Mitri, F. G.

    2017-04-01

    The optical torque exerted on an absorptive megneto-dielectric sphere by an axicon-generated vector Bessel (vortex) beam with selected polarizations is investigated in the framework of the dipole approximation. The total optical torque is expressed as the sum of orbital and spin torques. The axial orbital torque component is calculated from the z-component of the cross-product of the vector position r and the optical force exerted on the sphere F. Depending on the beam characteristics (such as the half-cone angle and polarization type) and the physical properties of the sphere, it is shown here that the axial orbital torque vanishes before reversing sign, indicating a counter-intuitive orbital motion in opposite handedness of the angular momentum carried by the incident waves. Moreover, analytical formulas for the spin torque, which is divided into spin torques induced by electric and magnetic dipoles, are derived. The corresponding components of both the optical spin and orbital torques are numerically calculated, and the effects of polarization, the order of the beam, and half-cone angle are discussed in detail. The left-handed (i.e., negative) optical torque is discussed, and the conditions for generating optical spin and orbital torque sign reversal are numerically investigated. The transverse optical spin torque has a vortex-like character, whose direction depends on the polarization, the half-cone angle, and the order of the beam. Numerical results also show that the vortex direction depends on the radial position of the particle in the transverse plane. This means that a sphere may rotate with different directions when it moves radially. Potential applications are in particle manipulation and rotation, single beam optical tweezers, and other emergent technologies using vector Bessel beams on a small magneto-dielectric (nano) particle.

  7. Terahertz electro-absorption effect enabling femtosecond all-optical switching in semiconductor quantum dots

    DEFF Research Database (Denmark)

    Hoffmann, M.C.; Monozon, B.S.; Livhits, D.

    2010-01-01

    We demonstrate an instantaneous all-optical manipulation of optical absorption in InGaAs/GaAs quantum dots (QDs) via an electro-absorption effect induced by the electric field of an incident free-space terahertz signal. A terahertz signal with the full bandwidth of 3 THz was directly encoded onto...

  8. Resonant optical absorption and defect control in Ta3N5 photoanodes

    NARCIS (Netherlands)

    Dabirian, A.; Van de Krol, R.

    2013-01-01

    In this study, we explore resonance-enhanced optical absorption in Ta3N5 photoanodes for water splitting. By using a reflecting Pt back-contact and appropriate Ta3N5 film thickness, the resonance frequency can be tuned to energies just above the bandgap, where the optical absorption is normally weak

  9. Effects of Electron-Phonon Interaction on Linear and Nonlinear Optical Absorption in Cylindrical Quantum Wires

    Institute of Scientific and Technical Information of China (English)

    YU You-Bin

    2008-01-01

    The electron-phonon interaction influences on linear and nonlinear optical absorption in cylindrical quantum wires (CQW) with an infinite confining potential are investigated. The optical absorption coefficients are obtained by using the compact-density-matrix approach and iterative method, and the numerical results are presented for GaAs CQW. The results show that the electron-phonon interaction makes a distinct influence on optical absorption in CQW. The electron-phonon interaction on the wave functions of electron dominates the values of absorption coefficients and the correction of the electron-phonon effect on the energies of the electron makes the absorption peaks blue shift and become wider. Moreover, the electron-phonon interaction influence on optical absorption with an infinite confining potential is different from that with a finite confining potential.

  10. Tunable emission and excited state absorption induced optical limiting in Tb2(MoO4)3: Sm3+/Eu3+ nanophosphors

    Science.gov (United States)

    Mani, Kamal P.; Sreekanth, Perumbilavil; Vimal, G.; Biju, P. R.; Unnikrishnan, N. V.; Ittyachen, M. A.; Philip, Reji; Joseph, Cyriac

    2016-12-01

    Photoluminescence properties and optical limiting behavior of pure and Sm3+/Eu3+ doped Tb2(MoO4)3 nanophosphors are investigated. The prepared nanophosphors exhibit excellent emission when excited by UV light. Color-tunable emissions in Tb2-xSmx(MoO4)3 and Tb2-xEux(MoO4)3 are realized by employing different excitation wavelengths or by controlling the doping concentration of Sm3+ and Eu3+. Luminescence quantum yield and CIE chromatic coordinates of the prepared phosphors were also presented. Optical limiting properties of the samples are investigated by open aperture Z-scan technique using 5 ns laser pulses at 532 nm. Numerical fitting of the measured Z-scan data to the relevant nonlinear transmission equations reveals that the nonlinear absorption is arising from strong excited state absorption, along with weak absorption saturation and it is found that the optical nonlinearity of Tb2(MoO4)3 increases with Sm3+/Eu3+doping. Parameters such as saturation fluence, excited state absorption cross section and ground state absorption cross section of the samples have been determined numerically, from which the figure of merit for nonlinear absorption is calculated. The excited state absorption cross-section of the samples is found to be one order of magnitude higher than that of the ground state absorption cross-section, indicating strong reverse saturable absorption. These results indicate that Sm3+/Eu3+ doped Tb2(MoO4)3 nanophosphors are efficient media for UV/n-UV pumped LEDs, and are also potential candidates for designing efficient optical limiting devices for the protection of human eyes and sensitive optical detectors from harmful laser radiation.

  11. Theoretical Studies on the Third-order Nonlinear Optical Properties and Two-photon Absorption of Stilbene Derivatives

    Institute of Scientific and Technical Information of China (English)

    REN, Ai-Min(任爱民); FENG, Ji-Kang(封继康); LIU, Xiao-Juan(刘孝娟)

    2004-01-01

    Different types of stilbene derivatives (D-π-D, A-π-A, D-π-A) were investigated with AM1, and specially, equilibrium geometries of symmetrical stilbene derivatives (D-π-D) were studied using of PM3. With the same method INDO/CI, the UV-vis spectra were explored and the position and strength of the two-photon absorption were predicated by Sum-Over-States expression. The relationships of the structures, spectra and nonlinear optical properties have been examined. The influence of various substituents on two photon absorption cross-sections was discussed micromechanically.

  12. Ho:YAG absorption cross sections from 1700 to 2200 nm at 83, 175, and 295 K.

    Science.gov (United States)

    Brown, David C; Envid, Victoria; Zembek, Jason

    2012-12-01

    We have obtained absorption spectroscopic cross sections as a function of wavelength for the laser material Ho:YAG at 295, 175, and 83 K, in the spectral range from 1700 to 2200 nm. The absorption range corresponds to (5)I8-(5)I7 transitions from the ground state to the first excited state amenable to direct pumping by laser diodes and Tm fiber lasers. The data allow a direct comparison of the absorption cross-section intensities and linewidths as temperature is lowered from room temperature to cryogenic temperatures. Universal absorption curves and numerical tables are presented for pump sources that are assumed to have a gaussian spectral lineshape, as a function of center wavelength, bandwidth, and optical density (doping density×penetration depth), at 295 and 83 K. Curves and tables are presented for both 295 and 83 K and may be used to optimize the pump absorption and laser efficiency.

  13. High-resolution absorption cross sections of C$_{2}$H$_{6}$ at elevated temperatures

    OpenAIRE

    2015-01-01

    Infrared absorption cross sections near 3.3 $\\mu$m have been obtained for ethane, C$_{2}$H$_{6}$. These were acquired at elevated temperatures (up to 773 K) using a Fourier transform infrared spectrometer and tube furnace with a resolution of 0.005 cm$^{-1}$. The integrated absorption was calibrated using composite infrared spectra taken from the Pacific Northwest National Laboratory (PNNL). These new measurements are the first high-resolution infrared C$_{2}$H$_{6}$ cross sections at elevate...

  14. New and improved infrared absorption cross sections for dichlorodifluoromethane (CFC-12

    Directory of Open Access Journals (Sweden)

    J. J. Harrison

    2015-03-01

    Full Text Available Despite its widespread commercial use throughout the twentieth century, primarily in the refrigeration industry, dichlorodifluoromethane (CFC-12 is now known to have the undesirable effect of depleting stratospheric ozone. As this long-lived molecule slowly degrades in the atmosphere, monitoring its vertical concentration profile using infrared sounders on satellite platforms crucially requires accurate laboratory spectroscopic data. This work describes new high-resolution infrared absorption cross sections of dichlorodifluoromethane over the spectral range 800–1270 cm−1, determined from spectra recorded using a high-resolution Fourier transform spectrometer (Bruker IFS 125HR and a 26 cm-pathlength cell. Spectra of dichlorodifluoromethane/dry synthetic air mixtures were recorded at resolutions between 0.01 and 0.03 cm−1 (calculated as 0.9/MOPD; MOPD = maximum optical path difference over a range of temperatures and pressures (7.5–761 Torr and 190–294 K appropriate for atmospheric conditions. This new cross-section dataset improves upon the one currently available in the HITRAN and GEISA databases.

  15. New and improved infrared absorption cross sections for chlorodifluoromethane (HCFC-22)

    Science.gov (United States)

    Harrison, Jeremy J.

    2016-06-01

    The most widely used hydrochlorofluorocarbon (HCFC) commercially since the 1930s has been chloro-difluoromethane, or HCFC-22, which has the undesirable effect of depleting stratospheric ozone. As this molecule is currently being phased out under the Montreal Protocol, monitoring its concentration profiles using infrared sounders crucially requires accurate laboratory spectroscopic data. This work describes new high-resolution infrared absorption cross sections of chlorodifluoromethane over the spectral range 730-1380 cm-1, determined from spectra recorded using a high-resolution Fourier transform spectrometer (Bruker IFS 125HR) and a 26 cm pathlength cell. Spectra of chlorodifluoromethane/dry synthetic air mixtures were recorded at resolutions between 0.01 and 0.03 cm-1 (calculated as 0.9/MOPD; MOPD denotes the maximum optical path difference) over a range of temperatures and pressures (7.5-762 Torr and 191-295 K) appropriate for atmospheric conditions. This new cross-section dataset improves upon the one currently available in the HITRAN (HIgh-resolution TRANsmission) and GEISA (Gestion et Etude des Informations Spectroscopiques Atmosphériques) databases; in particular it provides coverage over a wider range of pressures and temperatures, has more accurate wavenumber scales, more consistent integrated band intensities, improved signal-to-noise, is free of channel fringing, and additionally covers the ν2 and ν7 bands.

  16. Absorption cross-section measurements of methane, ethane, ethylene and methanol at high temperatures

    KAUST Repository

    Alrefae, Majed

    2014-09-01

    Mid-IR absorption cross-sections are measured for methane, ethane, ethylene and methanol over 2800-3400 cm-1 (2.9-3.6 μm) spectral region. Measurements are carried out using a Fourier-Transform-Infrared (FTIR) spectrometer with temperatures ranging 296-1100 K and pressures near atmospheric. As temperature increases, the peak cross-sections decrease but the wings of the bands increase as higher rotational lines appear. Integrated band intensity is also calculated over the measured spectral region and is found to be a very weak function of temperature. The absorption cross-sections of the relatively small fuels studied here show dependence on the bath gas. This effect is investigated by studying the variation of absorption cross-sections at 3.392 μm using a HeNe laser in mixtures of fuel and nitrogen, argon, or helium. Mixtures of fuel with He have the highest value of absorption cross-sections followed by Ar and N2. Molecules with narrow absorption lines, such as methane and methanol, show strong dependence on bath gas than molecules with relatively broader absorption features i.e. ethane and ethylene. © 2014 Elsevier Inc. All rights reserved.

  17. Absorption cross-section measurements of methane, ethane, ethylene and methanol at high temperatures

    Science.gov (United States)

    Alrefae, Majed; Es-sebbar, Et-touhami; Farooq, Aamir

    2014-09-01

    Mid-IR absorption cross-sections are measured for methane, ethane, ethylene and methanol over 2800-3400 cm-1 (2.9-3.6 μm) spectral region. Measurements are carried out using a Fourier-Transform-Infrared (FTIR) spectrometer with temperatures ranging 296-1100 K and pressures near atmospheric. As temperature increases, the peak cross-sections decrease but the wings of the bands increase as higher rotational lines appear. Integrated band intensity is also calculated over the measured spectral region and is found to be a very weak function of temperature. The absorption cross-sections of the relatively small fuels studied here show dependence on the bath gas. This effect is investigated by studying the variation of absorption cross-sections at 3.392 μm using a HeNe laser in mixtures of fuel and nitrogen, argon, or helium. Mixtures of fuel with He have the highest value of absorption cross-sections followed by Ar and N2. Molecules with narrow absorption lines, such as methane and methanol, show strong dependence on bath gas than molecules with relatively broader absorption features i.e. ethane and ethylene.

  18. UV absorption cross-sections of phenol and naphthalene at temperatures up to 500 degrees C

    DEFF Research Database (Denmark)

    Grosch, Helge; Sárossy, Zsuzsa; Egsgaard, Helge

    2015-01-01

    Absorption cross-sections and their temperature dependency, especially in the UV spectral range, of organic compounds such as phenol and naphthalene are of great interest in atmospheric research and high temperature processes. Due to the challenges of producing premixed gases of known concentration......, it is difficult to determine absorption cross-sections in experiments, especially at higher temperatures. In this paper, a gas flow of nitrogen with a stable but unknown concentration of phenol or naphthalene is produced, and their UV absorption spectra between 195 and 350 nm have been measured at higher....... Consequently, the absorption cross-sections for phenol and naphthalene at room temperature, 423 K, 573 K and 773 K in the range of 195-360 nm are presented in this study....

  19. Integrated fiber optic incoherent broadband cavity enhanced absorption spectroscopy detector for near-IR absorption measurements of nanoliter samples.

    Science.gov (United States)

    Gomez, Anthony L; Renzi, Ronald F; Fruetel, Julia A; Bambha, Ray P

    2012-05-10

    An integrated fiber-optic sensor is described that uses incoherent broadband cavity enhanced absorption spectroscopy for sensitive detection of aqueous samples in nanoliter volumes. Absorption was measured in a 100 µm gap between the ends of two short segments of multimode graded-index fiber that were integrated into a capillary using a precision machined V-grooved fixture that allowed for passive fiber alignment. The other ends of the fibers were coated with dielectric mirrors to form a 9.5 cm optical resonator. Light from a fiber-coupled superluminescent diode was directly coupled into one end of the cavity, and transmission was measured using a fiber-coupled silicon photodiode. Dilute aqueous solutions of near infrared dye were used to determine the minimum detectable absorption change of 2.4×10(-4) under experimental conditions in which pressure fluctuations limited performance. We also determined that the absolute minimum detectable absorption change would be 1.6×10(-5) for conditions of constant pressure in which absorption measurement is limited by electronic and optical noise. Tolerance requirements for alignment are also presented.

  20. Comment on "Giant absorption cross section of ultracold neutrons in Gadolinium"

    OpenAIRE

    Felber, J.; Gaehler, R.; Golub, R.

    2000-01-01

    Rauch et al (PRL 83, 4955, 1999) have compared their measurements of the Gd cross section for Ultra-cold neutrons with an exptrapolation of the cross section for thermal neutrons and interpreted the discrepancy in terms of coherence properties of the neutron. We show the extrapolation used is based on a misunderstanding and that coherence properties play no role in absorption.

  1. Cross-Sectional Measuring of Optical Beam

    Directory of Open Access Journals (Sweden)

    Tomas David

    2011-01-01

    Full Text Available This article deals with problematic of measuring of optical beam in free space optics (FSO. The professional FSO link was created between two buildings standing 1,5 kilometers apart from each other. Signal passing through the atmospheric media between optical heads is affected. This happens due to effects in atmospheric media. This article describes creating of the device for measuring the intensity of optical beam in 2D space and its subsequent rendering into 3D graph.

  2. Thermal neutron absorption cross section and clay mineral content for Miocene Carpathian samples

    Science.gov (United States)

    Woznicka

    2000-12-01

    A correlation between the thermal neutron absorption cross section and the clay volume for samples from the chosen geological region is discussed. A comparison of the calculated and measured absorption cross sections as a function of clay volume allows an estimate to be made on the presence of highly absorbing impurities in clays. From the example presented, it was deduced that 105 ppm of B or 25 ppm of Gd in the clay minerals in the samples tested would be sufficient to explain the difference between the experimental and calculated cross sections.

  3. VUV-absorption cross section of CO2 at high temperatures and impact on exoplanet atmospheres

    CERN Document Server

    Venot, Olivia; Bénilan, Yves; Gazeau, Marie-Claire; Hébrard, Eric; Larcher, Gwenaelle; Schwell, Martin; Dobrijevic, Michel; Selsis, Franck

    2015-01-01

    Ultraviolet (UV) absorption cross sections are an essential ingredient of photochemical atmosphere models. Exoplanet searches have unveiled a large population of short-period objects with hot atmospheres, very different from what we find in our solar system. Transiting exoplanets whose atmospheres can now be studied by transit spectroscopy receive extremely strong UV fluxes and have typical temperatures ranging from 400 to 2500 K. At these temperatures, UV photolysis cross section data are severely lacking. Our goal is to provide high-temperature absorption cross sections and their temperature dependency for important atmospheric compounds. This study is dedicated to CO2, which is observed and photodissociated in exoplanet atmospheres. We performed these measurements for the 115 - 200 nm range at 300, 410, 480, and 550 K. In the 195 - 230 nm range, we worked at seven temperatures between 465 and 800 K. We found that the absorption cross section of CO2 is very sensitive to temperature, especially above 160 nm....

  4. Effect of Pressure Broadening on Molecular Absorption Cross Sections in Exoplanetary Atmospheres

    CERN Document Server

    Hedges, Christina

    2016-01-01

    Spectroscopic observations of exoplanets are leading to unprecedented constraints on their atmospheric compositions. However, molecular abundances derived from spectra are degenerate with the absorption cross sections which form critical input data in atmospheric models. Therefore, it is important to quantify the uncertainties in molecular cross sections to reliably estimate the uncertainties in derived molecular abundances. However, converting line lists into cross sections via line broadening involves a series of prescriptions for which the uncertainties are not well understood. We investigate and quantify the effects of various factors involved in line broadening in exoplanetary atmospheres - the profile evaluation width, pressure versus thermal broadening, broadening agent, spectral resolution, and completeness of broadening parameters - on molecular absorption cross sections. We use H$_2$O as a case study as it has the most complete absorption line data. For low resolution spectra (R$\\lesssim$100) for re...

  5. UV optical absorption spectra analysis of beryl crystals from Brazil

    Energy Technology Data Exchange (ETDEWEB)

    Isotani, Sadao, E-mail: sisotani@if.usp.b [Instituto de Fisica da Universidade de Sao Paulo, Cidade Universitaria, Sao Paulo (Brazil); Regina Blak, Ana; Watanabe, Shigueo [Instituto de Fisica da Universidade de Sao Paulo, Cidade Universitaria, Sao Paulo (Brazil)

    2010-03-15

    The spectral decomposition analysis was applied to the optical absorption spectra of green and colorless beryl crystals from the Brazilian Eastern Pegmatitic province in the natural state, submitted to heat treatment and irradiated with UV light. The attributions of the lines were made taking into account highly accurate quantum mechanical calculations. The deconvolution of the green beryl spectra revealed four lines, two of them around 12,000 cm{sup -1} (1.5 eV) and two of them around 34,000 cm{sup -1} (4.2 eV) attributed to Fe{sup 2+} and Fe{sup 3+}, respectively. The deconvolution of the colorless beryl spectra without any treatment, after heating and for the same heat treatment followed by UV light irradiation revealed five lines. The analysis of ratio relations showed that the lines at 36,400 cm{sup -1} (4.5 eV) and 41,400 cm{sup -1} (5.1 eV) belongs to a single defect attributed to a silicon dangling bond defect (=Si:). Discussions and comparison with reported defects in quartz have supported the allocation of the lines at 61,000 cm{sup -1} (7.6 eV) and 43,800 cm{sup -1} (5.4 eV) to diamagnetic oxygen vacancy defect (ident toSi-Siident to) and unrelaxed (ident toSi...Siident to) defect, respectively. Finally, the line at 39,100 cm{sup -1} (4.8 eV), quite polarized along the c-axis, was attributed to a (Fe{sup 2+}OH{sup -}) defect in the structural channels.

  6. Extending differential optical absorption spectroscopy for limb measurements in the UV

    Directory of Open Access Journals (Sweden)

    J. Puķīte

    2010-05-01

    Full Text Available Methods of UV/VIS absorption spectroscopy to determine the constituents in the Earth's atmosphere from measurements of scattered light are often based on the Beer-Lambert law, like e.g. Differential Optical Absorption Spectroscopy (DOAS. While the Beer-Lambert law is strictly valid for a single light path only, the relation between the optical depth and the concentration of any absorber can be approximated as linear also for scattered light observations at a single wavelength if the absorption is weak. If the light path distribution is approximated not to vary with wavelength, also linearity between the optical depth and the product of the cross-section and the concentration of an absorber can be assumed. These assumptions are widely made for DOAS applications for scattered light observations.

    For medium and strong absorption of scattered light (e.g. along very long light-paths like in limb geometry the relation between the optical depth and the concentration of an absorber is no longer linear. In addition, for broad wavelength intervals the differences in the travelled light-paths at different wavelengths become important, especially in the UV, where the probability for scattering increases strongly with decreasing wavelength.

    However, the DOAS method can be extended to cases with medium to strong absorptions and for broader wavelength intervals by the so called air mass factor modified (or extended DOAS and the weighting function modified DOAS. These approaches take into account the wavelength dependency of the slant column densities (SCDs, but also require a priori knowledge for the air mass factor or the weighting function from radiative transfer modelling.

    We describe an approach that considers the fitting results obtained from DOAS, the SCDs, as a function of wavelength and vertical optical depth and expands this function into a Taylor series of both quantities. The Taylor coefficients are then applied as

  7. Extending differential optical absorption spectroscopy for limb measurements in the UV

    Science.gov (United States)

    Puä·Ä«Te, J.; Kühl, S.; Deutschmann, T.; Platt, U.; Wagner, T.

    2010-05-01

    Methods of UV/VIS absorption spectroscopy to determine the constituents in the Earth's atmosphere from measurements of scattered light are often based on the Beer-Lambert law, like e.g. Differential Optical Absorption Spectroscopy (DOAS). While the Beer-Lambert law is strictly valid for a single light path only, the relation between the optical depth and the concentration of any absorber can be approximated as linear also for scattered light observations at a single wavelength if the absorption is weak. If the light path distribution is approximated not to vary with wavelength, also linearity between the optical depth and the product of the cross-section and the concentration of an absorber can be assumed. These assumptions are widely made for DOAS applications for scattered light observations. For medium and strong absorption of scattered light (e.g. along very long light-paths like in limb geometry) the relation between the optical depth and the concentration of an absorber is no longer linear. In addition, for broad wavelength intervals the differences in the travelled light-paths at different wavelengths become important, especially in the UV, where the probability for scattering increases strongly with decreasing wavelength. However, the DOAS method can be extended to cases with medium to strong absorptions and for broader wavelength intervals by the so called air mass factor modified (or extended) DOAS and the weighting function modified DOAS. These approaches take into account the wavelength dependency of the slant column densities (SCDs), but also require a priori knowledge for the air mass factor or the weighting function from radiative transfer modelling. We describe an approach that considers the fitting results obtained from DOAS, the SCDs, as a function of wavelength and vertical optical depth and expands this function into a Taylor series of both quantities. The Taylor coefficients are then applied as additional fitting parameters in the DOAS analysis

  8. Experimental study on the temperature dependence of ultraviolet absorption cross-sections of sulfur dioxide

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    The photoabsorption cross-sections of sulfur dioxide were measured in the spectral regions of 200-230 nm and 275 315 nm at 298-415 K,using a grating monochromator with a resolution of 0.2 nm.The discrete absorption cross-section is directly correlated with the number of quantum excited from the base state.The absorption cross-sections at the peaks of discrete bands decreased linearly with the increase of temperature,which corresponded to the decrease in the population of vibrational and rotational transitions from the base level to higher excitation levels.The absorption cross-section peaks decreased linearly when the temperature increased from 298 to 415 K,with relative drops of 74.0% and 75.8% at 200-230 nm and 275-315 nm,respectively.Another distinctive feature of sulfur dioxide absorption spectra in the above two spectral regions was the quasiperiodic structure of the absorption peaks,whose equal wavelength intervals were 1.53 nm and 1.95 nm,respectively.Red and blue shifts were not found at the absorption peak positions.

  9. Tuning optical and three photon absorption properties in graphene oxide-polyvinyl alcohol free standing films

    Science.gov (United States)

    Karthikeyan, B.; Udayabhaskar, R.; Hariharan, S.

    2016-07-01

    We report the optical and nonlinear optical properties of graphene oxide (GO)-polyvinyl alcohol (PVA) free standing films. The composite polymer films were prepared in ex-situ method. The variation in optical absorption spectra and optical constants with the amount of GO loading was noteworthy from the optical absorption spectroscopic studies. Nonlinear optical studies done at 532 nm using 5 ns laser pulses show three photon absorption like behaviour. Both steady state and time resolved fluorescence studies reveal that the GO was functioning as a pathway for the decay of fluorescence from PVA. This is attributed to the energy level modifications of GO through hydroxyl groups with PVA. Raman spectroscopy also supports the interaction between GO and PVA ions through OH radicals.

  10. Optical absorption of charged excitons in semiconducting carbon nanotubes

    DEFF Research Database (Denmark)

    Rønnow, Troels Frimodt; Pedersen, Thomas Garm; Cornean, Horia

    2012-01-01

    In this article we examine the absorption coefficient of charged excitons in carbon nanotubes. We investigate the temperature and damping dependence of the absorption spectra. We show that the trion peak in the spectrum is asymmetric for temperatures greater than approximately 1 K whereas the abs...

  11. Microstructural and Optical Absorption Properties of Cu-MgF2 Nanoparticle Cermet Film

    Institute of Scientific and Technical Information of China (English)

    孙兆奇; 孙大明; 阮图南

    2002-01-01

    We examine the microstructural and optical absorption spectra of 10-30 vol% Cu-MgF2 nanoparticle cermet films prepared by co-evaporation in vacuum. The results show that the Cu-MgF2 cermet films are mainly composed of the amorphous MgF2 matrix with embedded fcc Cu nanoparticles of average size 12-24 nm. The results also show that the optical absorption of the films decreases as the wavelength increases in the range of 200-800nm. The surface plasmon resonance absorption peaks of Cu nanoparticles in 10, 20 and 30 vo1% Cu-MgF2 films appear at 578, 588 and 606nm, respectively. The interband transition absorption of Cu starts from 590nm downwards.Based on the Maxwell-Garnett theory, the experimental optical absorption properties of the films have been quantitatively evaluated.

  12. Optical Absorption of Poly(thiophene vinylene) Conjugated Polymers. Experiment and First Principle Theory

    CERN Document Server

    Gavrilenko, A V; Bonner, C E; Sun, S -S; Zhang, C; Gavrilenko, V I

    2008-01-01

    Optical absorption spectra of poly(thiophene vinylene) (PTV) conjugated polymers have been studied at room temperature in the spectral range of 450 to 800 nm. A dominant peak located at 577 nm and a prominent shoulder at 619 nm are observed. Another shoulder located at 685 nm is observed at high concentration and after additional treatment (heat, sonification) only. Equilibrium atomic geometries and optical absorption of PTV conjugated polymers have also been studied by first principles density functional theory (DFT). For PTV in solvent, the theoretical calculations predict two equilibrium geometries with different interchain distances. By comparative analysis of the experimental and theoretical data, it is demonstrated that the new measured long-wavelength optical absorption shoulder is consistent with new optical absorption peak predicted for most energetically favorable PTV phase in the solvent. This shoulder is interpreted as a direct indication of increased interchain interaction in the solvent which ha...

  13. Multi-spectral optical absorption in substrate-free nanowire arrays

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Junpeng; Chia, Andrew; Boulanger, Jonathan; LaPierre, Ray, E-mail: lapierr@mcmaster.ca [Department of Engineering Physics, McMaster University, 1280 Main St. West, Hamilton, Ontario L8S 4L7 (Canada); Dhindsa, Navneet; Khodadad, Iman; Saini, Simarjeet [Department of Electrical and Computer Engineering, University of Waterloo, 200 University Ave West, Waterloo, Ontario N2L 3G1 (Canada); Waterloo Institute of Nanotechnology, University of Waterloo, 200 University Ave West, Waterloo, Ontario N2L 3G1 (Canada)

    2014-09-22

    A method is presented of fabricating gallium arsenide (GaAs) nanowire arrays of controlled diameter and period by reactive ion etching of a GaAs substrate containing an indium gallium arsenide (InGaP) etch stop layer, allowing the precise nanowire length to be controlled. The substrate is subsequently removed by selective etching, using the same InGaP etch stop layer, to create a substrate-free GaAs nanowire array. The optical absorptance of the nanowire array was then directly measured without absorption from a substrate. We directly observe absorptance spectra that can be tuned by the nanowire diameter, as explained with rigorous coupled wave analysis. These results illustrate strong optical absorption suitable for nanowire-based solar cells and multi-spectral absorption for wavelength discriminating photodetectors. The solar-weighted absorptance above the bandgap of GaAs was 94% for a nanowire surface coverage of only 15%.

  14. Discrepancy between ambient annealing and H{sup +} implantation in optical absorption of ZnO

    Energy Technology Data Exchange (ETDEWEB)

    Lv, Jinpeng, E-mail: hitljp@gmail.com [College of Astronautics, Nanjing University of Aeronautics and Astronautics, Nanjing, Jiangsu (China); Li, Chundong [School of Materials Science and Engineering, Harbin Institute of Technology, Harbin, Heilongjiang (China)

    2016-05-15

    The discrepancy between sub-bandgap absorption in ZnO induced by thermal annealing and H{sup +} implantation is investigated in this study for the first time. Results indicate that nonreductive annealing-induced optical absorption is independent of annealing ambient, and can be assigned to V{sub O}, whereas the absorption centers caused by H{sup +} implantation and H{sub 2} annealing are primarily associated with V{sub O} and ionized Zn{sub i}.

  15. Optical absorption and Faraday rotation in spin doped Cd1-xHgxSe : Mn crystals

    NARCIS (Netherlands)

    Savchuk, AI; Paranchich, SY; Paranchich, LD; Romanyuk, OS; Andriychuk, MD; Nikitin, PI; Tomlinson, RD; Hill, AE; Pilkington, RD

    1998-01-01

    Optical absorption spectra and the Faraday effect in crystals of Cd1-xHgxSe : Mn have been studied. The studied samples have been characterized abrupt absorption edge and transparency region with high transmission coefficient. The measured values of Verdet constant were considerably larger than in I

  16. Optical limiting effect in a two-photon absorption dye doped solid matrix

    Science.gov (United States)

    He, Guang S.; Bhawalkar, Jayant D.; Zhao, Chan F.; Prasad, Paras N.

    1995-10-01

    We recently reported a new lasing dye, trans-4-[p-(N-ethyl-N-hydroxylethylamino)styryl]-N-methylpyridinium tetraphenylborate (ASPT), which has also been shown to possess a strong two-photon absorption (TPA) and subsequent frequency upconversion fluorescence behavior when excited with near infrared laser radiation. Based on the TPA mechanism, a highly efficient optical limiting performance has been demonstrated in a 2 cm long ASPT-doped epoxy rod pumped with 1.06 μm Q-switched laser pulses at 50-250 MW/cm2 intensity levels. The measured nonlinear absorption coefficient reached 6 cm/GW for the tested sample of dopant concentration d0=4×10-3 M/L. The molecular TPA cross section of ASPT in the epoxy matrix is estimated as σ2=2.5×10-18 cm4/GW or σ2'=4.7×10-46 cm4/photon/s, respectively. Two-photon pumped cavity lasing is also observed in an ASPT-doped polymer rod.

  17. Unified theory of electron-phonon renormalization and phonon-assisted optical absorption.

    Science.gov (United States)

    Patrick, Christopher E; Giustino, Feliciano

    2014-09-10

    We present a theory of electronic excitation energies and optical absorption spectra which incorporates energy-level renormalization and phonon-assisted optical absorption within a unified framework. Using time-independent perturbation theory we show how the standard approaches for studying vibronic effects in molecules and those for addressing electron-phonon interactions in solids correspond to slightly different choices for the non-interacting Hamiltonian. Our present approach naturally leads to the Allen-Heine theory of temperature-dependent energy levels, the Franck-Condon principle, the Herzberg-Teller effect and to phonon-assisted optical absorption in indirect band gap materials. In addition, our theory predicts sub-gap phonon-assisted optical absorption in direct gap materials, as well as an exponential edge which we tentatively assign to the Urbach tail. We also consider a semiclassical approach to the calculation of optical absorption spectra which simultaneously captures energy-level renormalization and phonon-assisted transitions and is especially suited to first-principles electronic structure calculations. We demonstrate this approach by calculating the phonon-assisted optical absorption spectrum of bulk silicon.

  18. Temperature-dependent optical absorption of SrTiO{sub 3}

    Energy Technology Data Exchange (ETDEWEB)

    Kok, Dirk J.; Irmscher, Klaus; Naumann, Martin; Guguschev, Christo; Galazka, Zbigniew; Uecker, Reinhard [Leibniz Institute for Crystal Growth, Berlin (Germany)

    2015-09-15

    The optical absorption edge and near infrared absorption of SrTiO{sub 3} were measured at temperatures from 4 to 1703 K. The absorption edge decreases from 3.25 eV at 4 K to 1.8 eV at 1703 K and is extrapolated to approximately 1.2 eV at the melting point (2350 K). The transmission in the near IR decreases rapidly above 1400 K because of free carrier absorption and is about 50% of the room temperature value at 1673 K. The free carriers are generated by thermal excitation of electrons over the band gap and the formation of charged vacancies. The observed temperature-dependent infrared absorption can be well reproduced by a calculation based on simple models for the intrinsic free carrier concentration and the free carrier absorption coefficient. The measured red shift of the optical absorption edge and the rising free carrier absorption strongly narrow the spectral range of transmission and impede radiative heat transport through the crystal. These effects have to be considered in high temperature applications of SrTiO{sub 3}-based devices, as the number of free carriers rises considerably, and in bulk crystal growth to avoid growth instabilities. Temperature dependent optical absorption edge of SrTiO{sub 3}, measured, fitted, and extrapolated to the melting point. (copyright 2015 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  19. High-resolution absorption cross sections of C$_{2}$H$_{6}$ at elevated temperatures

    CERN Document Server

    Hargreaves, Robert J; Dulick, Michael; Bernath, Peter F

    2015-01-01

    Infrared absorption cross sections near 3.3 $\\mu$m have been obtained for ethane, C$_{2}$H$_{6}$. These were acquired at elevated temperatures (up to 773 K) using a Fourier transform infrared spectrometer and tube furnace with a resolution of 0.005 cm$^{-1}$. The integrated absorption was calibrated using composite infrared spectra taken from the Pacific Northwest National Laboratory (PNNL). These new measurements are the first high-resolution infrared C$_{2}$H$_{6}$ cross sections at elevated temperatures.

  20. Improved measurement of the neutron absorption cross section for very low velocities

    Science.gov (United States)

    Schroffenegger, J.; Fierlinger, P.; Hollering, A.; Geltenbort, P.; Lauer, T.; Rauch, H.; Zechlau, T.

    2016-01-01

    The absorption cross section of natural Gd and isotopic enriched 157Gd for ultra-cold neutrons (UCN) as a function of the velocity has been measured within a time-of-flight-experiment. Particular attention is paid to small velocities in the region of a few m/s. This is intended to determine the validity of the 1 / v-law governing absorption cross sections in this region and the resulting divergence at v = 0. The experiment does not show any significant violation of 1 / v for v > 3 m /s.

  1. Improved measurement of the neutron absorption cross section for very low velocities

    Directory of Open Access Journals (Sweden)

    J. Schroffenegger

    2016-01-01

    Full Text Available The absorption cross section of natural Gd and isotopic enriched 157Gd for ultra-cold neutrons (UCN as a function of the velocity has been measured within a time-of-flight-experiment. Particular attention is paid to small velocities in the region of a few m/s. This is intended to determine the validity of the 1/v-law governing absorption cross sections in this region and the resulting divergence at v=0. The experiment does not show any significant violation of 1/v for v>3 m/s.

  2. Improved measurement of the neutron absorption cross section for very low velocities

    OpenAIRE

    J. Schroffenegger; Fierlinger, P.; Hollering, A.; Geltenbort, P; Lauer, T.(Forschungsneutronenquelle Heinz Maier-Leibnitz, Technische Universität München, Garching, D-85748, Germany); Rauch, H.; Zechlau, T.

    2016-01-01

    The absorption cross section of natural Gd and isotopic enriched 157 Gd for ultra-cold neutrons (UCN) as a function of the velocity has been measured within a time-of-flight-experiment. Particular attention is paid to small velocities in the region of a few m/s. This is intended to determine the validity of the 1/v -law governing absorption cross sections in this region and the resulting divergence at v=0 . The experiment does not show any significant violation of 1/v for v>3 m/s .

  3. Transient Intersubband Optical Absorption in Double Quantum Well Structure

    Institute of Scientific and Technical Information of China (English)

    WU Bin-He

    2005-01-01

    The microscopic equations of motion including many-body effects are derived to study the intersubband polarization in the double quantum well structure induced by an ultrafast pumping infrared light. Based on the selfconsistent field theory, the transient probe absorption coefficient is calculated. These calculations are beyond the previous steady-state assumption. Transient probe absorption spectra are calculated under different pumping intensity and various pump probe delay.

  4. Optical pumping effect in absorption imaging of F=1 atomic gases

    CERN Document Server

    Kim, Sooshin; Noh, Heung-Ryoul; Shin, Y

    2016-01-01

    We report our study of the optical pumping effect in absorption imaging of $^{23}$Na atoms in the $F=1$ hyperfine spin states. Solving a set of rate equations for the spin populations under a probe beam, we obtain an analytic expression for the optical signal of the $F=1$ absorption imaging. Furthermore, we verify the result by measuring the absorption spectra of $^{23}$Na Bose-Einstein condensates prepared in various spin states with different probe beam pulse durations. The analytic result can be used in quantitative analysis of $F=1$ spinor condensate imaging and readily applied to other alkali atoms with $I=3/2$ nuclear spin such as $^{87}$Rb.

  5. Edge-promoting reconstruction of absorption and diffusivity in optical tomography

    DEFF Research Database (Denmark)

    Hannukainen, A.; Harhanen, Lauri Oskari; Hyvönen, N.;

    2015-01-01

    In optical tomography a physical body is illuminated with near-infrared light and the resulting outward photon flux is measured at the object boundary. The goal is to reconstruct internal optical properties of the body, such as absorption and diffusivity. In this work, it is assumed that the imaged...

  6. Optical label switching in telecommunication using semiconductor lasers, amplifiers and electro-absorption modulators

    DEFF Research Database (Denmark)

    Chi, Nan; Christiansen, Lotte Jin; Jeppesen, Palle

    2004-01-01

    We demonstrate all-optical label encoding and updating for an orthogonally labeled signal in combined IM/FSK modulation format utilizing semiconductor lasers, semiconductor optical amplifiers and electro-absorption modulators. Complete functionality of a network node including two-hop transmissio...

  7. Correction of optical absorption and scattering variations in Laser Speckle Rheology measurements.

    Science.gov (United States)

    Hajjarian, Zeinab; Nadkarni, Seemantini K

    2014-03-24

    Laser Speckle Rheology (LSR) is an optical technique to evaluate the viscoelastic properties by analyzing the temporal fluctuations of backscattered speckle patterns. Variations of optical absorption and reduced scattering coefficients further modulate speckle fluctuations, posing a critical challenge for quantitative evaluation of viscoelasticity. We compare and contrast two different approaches applicable for correcting and isolating the collective influence of absorption and scattering, to accurately measure mechanical properties. Our results indicate that the numerical approach of Monte-Carlo ray tracing (MCRT) reliably compensates for any arbitrary optical variations. When scattering dominates absorption, yet absorption is non-negligible, diffusing wave spectroscopy (DWS) formalisms perform similar to MCRT, superseding other analytical compensation approaches such as Telegrapher equation. The computational convenience of DWS greatly simplifies the extraction of viscoelastic properties from LSR measurements in a number of chemical, industrial, and biomedical applications.

  8. Optical absorption of sodium copper chlorophyllin thin films in UV-vis-NIR region.

    Science.gov (United States)

    Farag, A A M

    2006-11-01

    The optical absorption studies of sodium copper chlorophyllin thin films (SCC), prepared by spray pyrolysis, in the UV-vis-NIR region was reported for the first time. Several new discrete transitions are observed in the UV-vis region of the spectra in addition to a strong continuum component in the IR region. The spectra of the infrared absorption allow characterization of vibration modes for the powder and thin films of SCC. The absorption spectrum recorded in the UV-vis region showed different absorption bands, namely the Soret (B) in the region 340-450 nm and Q-band in the region 600-700 nm and other band labeled N in the 240-320 region. Some important spectral parameters namely optical absorption coefficient (alpha), molar extinction coefficient (epsilon(molar)), oscillator strength (f), electric dipole strength (q(2)) and absorption half bandwidth (Deltalambda) of the principle optical transitions were evaluated. The analysis of the absorption coefficient in the absorption region revealed direct transitions and the energy gap was estimated as 1.63 eV. Discussion of the obtained results and their comparison with the previous published data are also given.

  9. Enhancement of broadband optical absorption in photovoltaic devices by band-edge effect of photonic crystals.

    Science.gov (United States)

    Tanaka, Yoshinori; Kawamoto, Yosuke; Fujita, Masayuki; Noda, Susumu

    2013-08-26

    We numerically investigate broadband optical absorption enhancement in thin, 400-nm thick microcrystalline silicon (µc-Si) photovoltaic devices by photonic crystals (PCs). We realize absorption enhancement by coupling the light from the free space to the large area resonant modes at the photonic band-edge induced by the photonic crystals. We show that multiple photonic band-edge modes can be produced by higher order modes in the vertical direction of the Si photovoltaic layer, which can enhance the absorption on multiple wavelengths. Moreover, we reveal that the photonic superlattice structure can produce more photonic band-edge modes that lead to further optical absorption. The absorption average in wavelengths of 500-1000 nm weighted to the solar spectrum (AM 1.5) increases almost twice: from 33% without photonic crystal to 58% with a 4 × 4 period superlattice photonic crystal; our result outperforms the Lambertian textured structure.

  10. Optical absorption and fluorescence studies on imidazolium ionic liquids comprising the bis(trifluoromethanesulphonyl)imide anion

    Indian Academy of Sciences (India)

    Aniruddha Paul; Anunay Samanta

    2006-07-01

    Optical absorption and fluorescence behaviour of two rigorously purified imidazolium ionic liquids, 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide and 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide are studied in the neat condition and in solution. Non-negligible absorption in the UV region with a long tail extending into the visible region is the main feature of the absorption. Excitation wavelength-dependent two-component fluorescence characterizes the emission behaviour of these liquids. That ion association gives rise to the long absorption tail and shifting fluorescence maximum, which appears to be common to most of the imidazolium ionic liquids, is evident from the effect of the conventional solvents.

  11. Optical Absorption of Impurities and Defects in SemiconductingCrystals 1. Hydrogen-like Centres

    CERN Document Server

    Pajot, Bernard

    2010-01-01

    Absorption spectroscopy provides information on the chemical nature, atomic structure and concentration of hydrogen-like centers, to which belong most of the dopants of semiconductors and insulators. In this book, an introduction to the bulk optical properties of these materials and to the properties of hydrogen-like centers is first provided, followed by a description of set-ups used in absorption spectroscopy. The results of the calculations of the energy levels of these centres by effective-mass theory are exposed. Detailed absorption data on specific classes of centres are compared with theory, and atomic structures are deduced from absorption measurements under external perturbations.

  12. Intensity-Dependent Optical Nonlinear Absorption and Refraction of Gold Nanorods

    Institute of Scientific and Technical Information of China (English)

    GONG Hong-Mei; ZHOU zhang-Kai; XIAO Si; SONG Hao; SU xiong-Rui; LI Min; WANG Qu-Quan

    2007-01-01

    Au nanorods dispersed in aqueous solution were prepared with the electrochemical method.The absorption spectrum shows two absorption peaks corresponding to the perpendicular and transverse surface plasma resonance absorption of the nanorods.The third-order optical nonlinear properties are investigated by Z-scans.The signs of the nonlinear absorption coefficient and refractive index are reversed as the intensity of incident laser increases,which is due to the shape change of the gold nanoparticles melted by the intense laser pulses.

  13. Microstructure and optical absorption of Au-MgF2 nanoparticle cermet films

    Institute of Scientific and Technical Information of China (English)

    Sun Zhao-Qi; Cai Qi; Song Xue-Ping

    2006-01-01

    The microstructure and optical absorption of Au-MgF2 nanoparticle cermet films with different Au contents are studied.The microstructural analysis shows that the films are mainly composed of the amorphous MgF2 matrix with embedded fcc Au nanoparticles with a mean size of 9.8-21.4nm.Spectral analysis suggests that the surface plasma resonance (SPR) absorption peak of Au particles appears at λ=492-537nm.With increasing Au content,absorption peak intensity increases,profile narrows and location redshifts.Theoretical absorption spectra are calculated based on Maxwell-Garnett theory and compared with experimental spectra.

  14. Stabilization of Mass Absorption Cross Section of Elemental Carbon for Filter-Based Absorption Photometer by Heated Inlet

    Science.gov (United States)

    Kondo, Y.; Sahu, L.; Takegawa, N.; Miyazaki, Y.; Han, S.; Moteki, N.; Hu, M.; Kim Oanh, N.; Kim, Y.

    2008-12-01

    Accurate measurements of elemental carbon (EC) or black carbon on a long-term basis are important for the studies of impacts of EC on climate and human health. In principle, mass concentrations of EC (MEC) can be estimated by the measurement of light absorption coefficient by EC. Filter-based methods, which quantify the absorption coefficient (kabs) from the change in transmission through a filter loaded with particles, have been widely used to measure MEC because of the ease of the operation. However, in practice, reliable determination of MEC has been very difficult because of the large variability in the mass absorption cross sections (Cabs), which is a conversion factor from kabs to MEC. Coating of EC by volatile compounds and co-existence of light-scattering particles greatly contributes to the variability of Cabs. In order to overcome this difficulty, volatile aerosol components were removed before collection of EC particles on filters by heating an inlet section to 400°C. The heated inlet vaporized almost completely sulfate, nitrate, ammonium, and organics without any detectable loss of EC. Simultaneous measurements of kabs by two types photometers (Particle Soot Absorption Photometer (PSAP) and Continuous Soot Monitoring System (COSMOS)) together with MEC by the EC-OC analyzer were made to determine Cabs at 6 different locations in Asia (Japan, Korea, China, and Thailand) in different seasons. The Cabs was stable to be 10.5±0.7 m2 g-1 at the wavelength of 565 nm for EC strongly impacted by emissions from vehicles and biomass burning. The stability of the Cabs for different EC sources and under the different physical and chemical conditions provides a firm basis for its use in estimating MEC in fine mode with an accuracy of about 10%.

  15. Phenomenological dirac optical potential for neutron cross sections

    Energy Technology Data Exchange (ETDEWEB)

    Maruyama, Shin-ichi; Kitsuki, Hirohiko; Shigyo, Nobuhiro; Ishibashi, Kenji [Kyushu Univ., Fukuoka (Japan). Faculty of Engineering

    1997-03-01

    Because of limitation on neutron-incident data, it is difficult to obtain global optical model potential for neutrons. In contrast, there are some global optical model potentials for proton in detail. It is interesting to convert the proton-incident global optical potentials into neutron-incident ones. In this study we introduce (N-Z)/A dependent symmetry potential terms into the global proton-incident optical potentials, and then obtain neutron-incident ones. The neutron potentials reproduce total cross sections in an acceptable degree. However, a comparison with potentials proposed by other authors brings about a confused situation in the sign of the symmetry terms. (author)

  16. Cross section calculations of astrophysical interest. [for theories of absorption and emission lines

    Science.gov (United States)

    Gerjuoy, E.

    1974-01-01

    Cross sections are discussed for rotational excitation associated with theories of absorption and emission lines from molecules in space with emphasis on H2CO, CO, and OH by collisions with neutral particles such H, H2, and He. The sensitivity of the Thaddeus equation for the H2CO calculation is examined.

  17. Effects of polarization and absorption on laser induced optical breakdown threshold for skin rejuvenation

    Science.gov (United States)

    Varghese, Babu; Bonito, Valentina; Turco, Simona; Verhagen, Rieko

    2016-03-01

    Laser induced optical breakdown (LIOB) is a non-linear absorption process leading to plasma formation at locations where the threshold irradiance for breakdown is surpassed. In this paper we experimentally demonstrate the influence of polarization and absorption on laser induced breakdown threshold in transparent, absorbing and scattering phantoms made from water suspensions of polystyrene microspheres. We demonstrate that radially polarized light yields a lower irradiance threshold for creating optical breakdown compared to linearly polarized light. We also demonstrate that the thermal initiation pathway used for generating seed electrons results in a lower irradiance threshold compared to multiphoton initiation pathway used for optical breakdown.

  18. Generating Nanostructures with Multiphoton Absorption Polymerization using Optical Trap Assisted Nanopatterning

    Science.gov (United States)

    Tsai, Yu-Cheng; Leitz, Karl-Heinz; Fardel, Romain; Schmidt, Michael; Arnold, Craig B.

    The need to generate sub 100 nm features is of interest for a variety of applications including optics, optoelectronics, and plasmonics. To address this requirement, several advanced optical lithography techniques have been developed based on either multiphoton absorption polymerization or near-field effects. In this paper, we combine strengths from multiphoton absorption and near field using optical trap assisted nanopatterning (OTAN). A Gaussian beam is used to position a microsphere in a polymer precursor fluid near a substrate. An ultrafast laser is focused by that microsphere to induce multiphoton polymerization in the near field, leading additive direct-write nanoscale processing.

  19. Population Dynamics and the Optical Absorption in Hybrid Metal Nanoparticle - Semiconductor Quantum dot Nanosystem

    CERN Document Server

    Kim, Nam-Chol; Ko, Myong-Chol; So, Guang Hyok; Kim, Il-Guang

    2015-01-01

    We studied theoretically the population dynamics and the absorption spectrum of hybrid nanosystem consisted of a matal nanoparticle (MNP) and a semiconductor quantum dot(SQD). We investigated the exciton-plasmon coupling effects on the population dynamics and the absorption properties of the nanostructure. Our results show that the nonlinear optical response of the hybrid nanosystem can be greatly enhanced or depressed due to the exciton-plasmon couplings. The results obtained here may have the potential applications of nanoscale optical devices such as optical switches and quantum devices such as a single photon transistor.

  20. Design of differential optical absorption spectroscopy long-path telescopes based on fiber optics.

    Science.gov (United States)

    Merten, André; Tschritter, Jens; Platt, Ulrich

    2011-02-10

    We present a new design principle of telescopes for use in the spectral investigation of the atmosphere and the detection of atmospheric trace gases with the long-path differential optical absorption spectroscopy (DOAS) technique. A combination of emitting and receiving fibers in a single bundle replaces the commonly used coaxial-Newton-type combination of receiving and transmitting telescope. This very simplified setup offers a higher light throughput and simpler adjustment and allows smaller instruments, which are easier to handle and more portable. The higher transmittance was verified by ray-tracing calculations, which result in a theoretical factor threefold improvement in signal intensity compared with the old setup. In practice, due to the easier alignment and higher stability, up to factor of 10 higher signal intensities were found. In addition, the use of a fiber optic light source provides a better spectral characterization of the light source, which results in a lower detection limit for trace gases studied with this instrument. This new design will greatly enhance the usability and the range of applications of active DOAS instruments.

  1. VUV-absorption cross section of CO2 at high temperatures and impact on exoplanet atmospheres

    Directory of Open Access Journals (Sweden)

    Venot Olivia

    2014-02-01

    Full Text Available Ultraviolet (UV absorption cross sections are an essential ingredient of photochemical atmosphere models. Exoplanet searches have unveiled a large population of short-period objects with hot atmospheres, very different from what we find in our solar system. Transiting exoplanets whose atmospheres can now be studied by transit spectroscopy receive extremely strong UV fluxes and have typical temperatures ranging from 400 to 2500 K. At these temperatures, UV photolysis cross section data are severely lacking. Our goal is to provide high-temperature absorption cross sections and their temperature dependency for important atmospheric compounds. This study is dedicated to CO2, which is observed and photodissociated in exoplanet atmospheres. We performed these measurements for the 115 - 200 nm range at 300, 410, 480, and 550 K. In the 195 - 230 nm range, we worked at seven temperatures between 465 and 800 K. We found that the absorption cross section of CO2 is very sensitive to temperature, especially above 160 nm. Within the studied range of temperature, the CO2 cross section can vary by more than two orders of magnitude. This, in particular, makes the absorption of CO2 significant up to wavelengths as high as 230 nm, while it is negligible above 200 nm at 300 K. To investigate the influence of these new data on the photochemistry of exoplanets, we implemented the measured cross section into a 1D photochemical model. The model predicts that accounting for this temperature dependency of CO2 cross section can affect the computed abundances of NH3, CO2, and CO by one order of magnitude in the atmospheres of hot Jupiter and hot Neptune.

  2. 非相干光宽带腔增强吸收光谱技术应用于SO2弱吸收的测量%An Incoherent Broadband Optical Cavity Spectroscopy for Measuring Weak Absorption Cross Section of Sulfur Dioxide

    Institute of Scientific and Technical Information of China (English)

    段俊; 秦敏; 方武; 胡仁志; 卢雪; 沈兰兰; 王丹; 谢品华; 刘建国

    2016-01-01

    As a highly sensitive detection technology ,incoherent broadband cavity enhanced absorption spectroscopy (IBBCEAS) have successfully measured a variety of trace gases .According to the principle of cavity enhanced absorption spectroscopy ,if the accurate concentration of the target gas ,the curve of the mirror reflectance ,effective absorption path length ,the light intensity of the absorbing gas and non-absorbing gas are known ,the absorption cross section of the absorption gas can be measured .The accurate measurements of absorption cross section are necessary for satellite retrievals of atmospheric trace gases and the atmos-pheric research .This paper describes an incoherent broadband cavity enhanced absorption spectroscopy (IBBCEAS) instrument with 365 nm LED as the light source for measuring absorption cross section of SO2 from 357 to 385 nm which is arising from the spin-forbidden a3 B1 — X1 A1 transition .In comparison to the literature absorption cross section of SO 2 ,and correlation coeffi-cient r is 0.997 3 .The result shows the potential of the IBBCEAS system for measuring weak absorption cross section .%非相干光宽带腔增强吸收光谱作为高灵敏检测技术 ,已成功应用于多种大气痕量气体浓度的测量.根据腔增强吸收光谱技术测量原理可知 ,若已知测量气体准确浓度 ,镜片反射率随波长的变化曲线、有效吸收长度、光学腔内有无测量气体吸收前后的光辐射变化 ,可测量出待测气体的吸收截面.SO2 由于 a 3 B1 —X1 A1 自旋禁阻跃迁 ,在345~420 nm波段吸收截面较低(~10-22 cm2/molecule) ,其测量有一定难度 ,而准确的弱吸收截面对于卫星反演大气痕量气体浓度以及大气研究等方面均有重要意义.采用365 nm L ED光源的宽带腔增强吸收光谱实验装置测量357~385 nm波段范围SO2 的弱吸收 ,获得该波段SO2 弱吸收截面 ,并与已公开发表的SO2 吸收截面进行对比 ,相关系数 r为0. 997 3 ,验证

  3. Absolute UV absorption cross sections of dimethyl substituted Criegee intermediate (CH3)2COO

    Science.gov (United States)

    Chang, Yuan-Pin; Chang, Chun-Hung; Takahashi, Kaito; Lin, Jim-Min, Jr.

    2016-06-01

    The absolute absorption cross sections of (CH3)2COO under a jet-cooled condition were measured via laser depletion to be (1.32 ± 0.10) × 10-17 cm2 molecule-1 at 308 nm and (9.6 ± 0.8) × 10-18 cm2 molecule-1 at 352 nm. The peak UV cross section is estimated to be (1.75 ± 0.14) × 10-17 cm2 molecule-1 at 330 nm, according to the UV spectrum of (CH3)2COO (Huang et al., 2015) scaled to the absolute cross section at 308 nm.

  4. Optical signal processing using electro-absorption modulators

    DEFF Research Database (Denmark)

    Mørk, Jesper; Romstad, Francis Pascal; Højfeldt, Sune

    2003-01-01

    Reverse-biased semiconductor waveguides are efficient saturable absorbers and have a number of promising all-optical signal processing applications. Results on ultrafast modulator dynamics as well as demonstrations and investigations of wavelength conversion and regeneration are presented....

  5. UV-Vis Ratiometric Resonance Synchronous Spectroscopy for Determination of Nanoparticle and Molecular Optical Cross Sections.

    Science.gov (United States)

    Nettles, Charles B; Zhou, Yadong; Zou, Shengli; Zhang, Dongmao

    2016-03-01

    Demonstrated herein is a UV-vis Ratiometric Resonance Synchronous Spectroscopic (R2S2, pronounced as "R-two-S-two" for simplicity) technique where the R2S2 spectrum is obtained by dividing the resonance synchronous spectrum of a NP-containing solution by the solvent resonance synchronous spectrum. Combined with conventional UV-vis measurements, this R2S2 method enables experimental quantification of the absolute optical cross sections for a wide range of molecular and nanoparticle (NP) materials that range optically from pure photon absorbers or scatterers to simultaneous photon absorbers and scatterers, simultaneous photon absorbers and emitters, and all the way to simultaneous photon absorbers, scatterers, and emitters in the UV-vis wavelength region. Example applications of this R2S2 method were demonstrated for quantifying the Rayleigh scattering cross sections of solvents including water and toluene, absorption and resonance light scattering cross sections for plasmonic gold nanoparticles, and absorption, scattering, and on-resonance fluorescence cross sections for semiconductor quantum dots (Qdots). On-resonance fluorescence quantum yields were quantified for the model molecular fluorophore Eosin Y and fluorescent Qdots CdSe and CdSe/ZnS. The insights and methodology presented in this work should be of broad significance in physical and biological science research that involves photon/matter interactions.

  6. O2 absorption cross sections /187-225 nm/ from stratospheric solar flux measurements

    Science.gov (United States)

    Herman, J. R.; Mentall, J. E.

    1982-10-01

    The absorption cross sections of molecular oxygen are calculated in the wavelength range from 187 to 230 nm from solar flux measurements obtained within the stratosphere. Within the Herzberg continuum wavelength region the molecular oxygen cross sections are found to be about 30% smaller than the laboratory results of Shardanand and Rao (1977) from 200 to 210 nm and about 50% smaller than those of Hasson and Nicholls (1971). At wavelengths longer than 210 nm the cross sections agree with those of Shardanand and Rao. The effective absorption cross sections of O2 in the Schumann-Runge band region from 187 to 200 nm are calculated and compared to the empirical fit given by Allen and Frederick (1982). The calculated cross sections indicate that the transmissivity of the atmosphere may be underestimated by the use of the Allen and Frederic cross sections between 195 and 200 nm. The ozone column content between 30 and 40 km and the relative ozone cross sections are determined from the same solar flux data set.

  7. Calibration of effective optical path length for hollow-waveguide based gas cell using absorption spectroscopy

    Science.gov (United States)

    Liu, Lin; Du, Zhenhui; Li, Jinyi

    2016-10-01

    The Hollow Waveguide (HWG) has emerged as a novel tool to transmit laser power. Owing to its long Effective Optical Path Length (EOPL) within a relatively small volume, it is suitable for the application as a gas cell in concentration measurement by using laser spectroscopy. The measurement of effective optical path length for a hollow waveguide, which possesses the physical length of 284.0 cm, by using Tunable Diode Laser Absorption Spectroscopy (TDLAS) was demonstrated. Carbon dioxide was used as a sample gas for a hollow waveguide calibration. A 2004 nm Distributed Feed-Back (DFB) laser was used as the light source to cover a CO2 line near 2003 nm, which was selected as the target line in the measurement. The reference direct absorption spectroscopy signal was obtained by delivering CO2 into a reference cell possessing a length of 29.4 cm. Then the effective optical path length of HWG was calculated by least-squares fitting the measured absorption signal to the reference absorption signal. The measured EOPL of HWG was 282.8 cm and the repeatability error of effective optical path length was calculated as 0.08 cm. A detection limit of 0.057 cm (with integral time 5 s) characterized by the Allan variance, was derived. The effective optical path length is obtained as the significant parameter to calculate the concentration of gases and it is of great importance to precise measurement of absorption spectroscopy.

  8. In situ optical absorption mercury continuous emission monitor.

    Science.gov (United States)

    Thiebaud, Jérôme; Thomson, Murray J; Mani, Reza; Morrow, William H; Morris, Eric A; Jia, Charles Q

    2009-12-15

    This paper reports the development of an in situ continuous emission monitor (CEM) for measuring elemental mercury (Hg(0)) concentration in the exhaust stream of coal-fired power plants. The instrument is based on the ultraviolet atomic absorption of a mercury lamp emission line by elemental mercury and a light-emitting diode (LED) background correction system. This approach allows an in situ measurement since the absorption of other species such as SO(2) can be removed to monitor the Hg(0) contribution only. Proof of concept was established through a laboratory-based investigation, and a limit of detection, [Hg(0)](min), of 2 microg/m(3) was measured for a 1-min averaged sample and an absorption path length of 49 cm. [Hg(0)](min) is anticipated to be better than 0.2 microg/m(3) across a 7 m diameter stack. Finally, the apparatus was field-tested in a 230 MW coal-fired power plant. The operability of the measurement in real conditions was demonstrated, leading to the first Hg(0) concentration values recorded by the in situ CEM. Comparison with an accepted standard method is required for validation.

  9. UV absorption cross-sections of selected sulfur-containing compounds at temperatures up to 500°C

    DEFF Research Database (Denmark)

    Grosch, Helge; Fateev, Alexander; Clausen, Sønnik

    2015-01-01

    The temperature dependence of the ultraviolet absorption cross-sections of three different sulfur containing compounds, hydrogen sulfide (H2S), carbon disulfide (CS2) and carbonyl sulfide (OCS), are presented between 200nm and 360nm at a resolution of 0.018nm. The absorption cross-sections for each...

  10. Determination of absorption cross-section of Si nanocrystals by two independent methods based on either absorption or luminescence

    Energy Technology Data Exchange (ETDEWEB)

    Valenta, J., E-mail: jan.valenta@mff.cuni.cz; Greben, M. [Department of Chemical Physics and Optics, Faculty of Mathematics and Physics, Charles University, Ke Karlovu 3, 121 16 Prague 2 (Czech Republic); Remeš, Z. [Institute of Physics, Academy of Sciences of the Czech Republic, Cukrovarnická 10, Prague 6 (Czech Republic); Gutsch, S.; Hiller, D.; Zacharias, M. [Faculty of Engineering, IMTEK, Albert-Ludwigs-University Freiburg, Georges-Köhler-Allee 103, 79110 Freiburg (Germany)

    2016-01-11

    Absorption cross-section (ACS) of silicon nanocrystals (SiNCs) is determined via two completely independent approaches: (i) Excitation-intensity-dependent photoluminescence (PL) kinetics under modulated (long square pulses) pumping and (ii) absorbance measured by the photothermal deflection spectroscopy combined with morphology information obtained by the high-resolution transmission electron microscopy. This unique comparison reveals consistent ACS values around 10{sup −15} cm{sup 2} for violet excitation of SiNCs of about 3–5 nm in diameter and this value is comparable to most of direct band-gap semiconductor nanocrystals; however, it decreases steeply towards longer wavelengths. Moreover, we analyze the PL-modulation technique in detail and propose an improved experimental procedure which enables simpler implementation of this method to determine ACS of various (nano)materials in both solid and liquid states.

  11. Parametric Study of the Absorption Cross-Section for a Moderately Conducting Thin Cylinder.

    Science.gov (United States)

    Gurton, Kristan Peter

    A system has been developed to measure the absorption cross section of a single carbon fiber at 35 GHz as a function of length, orientation, and diameter. Typical lengths considered ranged from 1 to 20 mm, and diameters ranged from 3 to 8 um. The results were compared with the modified integral equation calculations of Waterman and Pedersen that describe the scattering and absorption behavior for a wire of finite length and conductivity. Good agreement was found for all lengths, orientations, and diameters studied.

  12. Parametric study of the absorption cross section for a moderately conducting thin cylinder

    Science.gov (United States)

    Gurton, Kristan P.; Bruce, Charles W.

    1995-05-01

    A system has been developed to measure the absorption cross section for a single carbon fiber at 35 GHz as a function of length, orientation, and diameter. Typical lengths of the fibers considered ranged from 1 to 20 mm, and diameters ranged from 3 to 8 mu m. The results were compared with the modified integral equation calculations of Waterman and Pedersen that describe the scattering and absorption behavior for a wire of finite length and conductivity. Good agreement was found for all lengths, orientations, and diameters studied.

  13. The local structure and optical absorption characteristic investigation on Fe doped TiO2 nanoparticles

    CERN Document Server

    Zhao, Tianxing; Huang, Junheng; He, Jinfu; Liu, Qinghua; Pan, Zhiyun; Wu, Ziyu

    2014-01-01

    The local structures and optical absorption characteristic of Fe doped TiO2 nanoparticles synthesized by the sol-gel method were characterized by X-ray Diffraction (XRD), X-ray absorption fine structure spectroscopy (XAFS) and UV-Vis absorption spectroscopy (UV-Vis). XRD patterns show that all Fe-doped TiO2 samples have the characteristic anatase structure. Accurate Fe and Ti K-edge EXAFS analysis further reveal that all Fe atoms replace Ti atoms in the anatase lattice. The analysis of UV-Vis data shows a red shift to the visible range. According to the above results, we claim that substitutional Fe atoms lead to the formation of structural defects and new intermediate energy levels appear, narrowing the band gap and extending the optical absorption edge towards the visible region.

  14. Confined optical-phonon-assisted cyclotron resonance in quantum wells via two-photon absorption process

    Science.gov (United States)

    Phuc, Huynh Vinh; Hien, Nguyen Dinh; Dinh, Le; Phong, Tran Cong

    2016-06-01

    The effect of confined phonons on the phonon-assisted cyclotron resonance (PACR) via both one and two photon absorption processes in a quantum well is theoretically studied. We consider cases when electrons are scattered by confined optical phonons described by the Fuchs-Kliewer slab, Ridley's guided, and Huang-Zhu models. The analytical expression of the magneto-optical absorption coefficient (MOAC) is obtained by relating it to the transition probability for the absorption of photons. It predicts resonant peaks caused by transitions between Landau levels and electric subband accompanied by confined phonons emission in the absorption spectrum. The MOAC and the full-width at half-maximum (FWHM) for the intra- and inter-subband transitions are given as functions of the magnetic field, temperature, and quantum well width. In narrow quantum wells, the phonon confinement becomes more important and should be taken into account in studying FWHM.

  15. Mass specific optical absorption coefficients of mineral dust components measured by a multi wavelength photoacoustic spectrometer

    Directory of Open Access Journals (Sweden)

    N. Utry

    2014-09-01

    Full Text Available Mass specific optical absorption coefficients of various mineral dust components including silicate clays (illite, kaolin and bentonite, oxides (quartz, hematite and rutile, and carbonate (limestone were determined at wavelengths of 1064, 532, 355 and 266 nm. These values were calculated from aerosol optical absorption coefficients measured by a multi-wavelength photoacoustic (PA instrument, the mass concentration and the number size distribution of the generated aerosol samples as well as the size transfer functions of the measuring instruments. These results are expected to have considerable importance in global radiative forcing calculations. They can also serve as reference for validating calculated wavelength dependent imaginary parts (κ of complex refractive indices which up to now have been typically deduced from bulk phase measurements by using indirect measurement methods. Accordingly, the presented comparison of the measured and calculated aerosol optical absorption spectra revealed the strong need for standardized sample preparation and measurement methodology in case of bulk phase measurements.

  16. Enhanced light absorption in graphene via a liquid-crystalline optical diode

    Science.gov (United States)

    Pantazi, Aikaterini Iria; Yannopapas, Vassilios

    2016-09-01

    We demonstrate theoretically that light absorption in graphene can be boosted via a light-trapping mechanism based on a liquid-crystalline optical diode. The optical diode consists of twisted-nematic and nematic liquid-crystalline slabs. In particular, we show that, using a proper optical-diode setup, the absorption in a single graphene layer can be enhanced by a factor of four. By varying the pitch of the twisted-nematic liquid-crystalline slabs comprising the diode, one can tune the operating spectral region of the diode and thus enhance the absorption of graphene within a desired spectral window. Our calculations are based on Berreman's 4×4 method which treats anisotropic, isotropic and/ or inhomogeneous layered systems on equal footing.

  17. Recent Progress Towards Quantum Dot Solar Cells with Enhanced Optical Absorption

    OpenAIRE

    Zheng, Zerui; Ji, Haining; Yu, Peng; Wang, Zhiming

    2016-01-01

    Quantum dot solar cells, as a promising candidate for the next generation solar cell technology, have received tremendous attention in the last 10 years. Some recent developments in epitaxy growth and device structures have opened up new avenues for practical quantum dot solar cells. Unfortunately, the performance of quantum dot solar cells is often plagued by marginal photon absorption. In this review, we focus on the recent progress made in enhancing optical absorption in quantum dot solar ...

  18. Near-infrared absorption fiber-optic sensors for ultra-sensitive CO2 detection

    Science.gov (United States)

    Chong, Xinyuan; Kim, Ki-Joong; Ohodnicki, Paul R.; Chang, Chih-Hung; Wang, Alan X.

    2015-05-01

    We present a fiber-optic sensor working at near-infrared (NIR) wavelength (~1.57μm) for CO2 detection. In order to increase the NIR absorption, we utilize functional sensor materials metalorganic framework (MOF) on the surface of the core of a multimode-fiber with the cladding layer etched away. The selected functional materials demonstrated excellent adsorption capacity of CO2 and significantly increased the detection sensitivity down to 500 ppm with only 8-centimeter absorption length.

  19. Embedded insulated metallic nanopatterns for enhanced optical absorption and photovoltaics

    Science.gov (United States)

    Ye, Fan; Burns, Michael J.; Naughton, Michael J.

    2012-02-01

    Recently, we have shown embedded metallic nanopatterns (EMN) in ultrathin PV films to be candidates for high efficiency thin-film solar cells, owing to prominent metamaterial/plasmonic-enhanced light trapping, as compared to unpatterned, surface- or bottom-patterned [1]. We also showed that hot electron effects emerge in ultrathin a-Si-based solar cells [2]. The EMN in the semiconductor layer, however, can also serve as a source of recombination for photogenerated electrons and holes, leading to decreased current. Here, we propose the idea of an embedded insulated metallic nanopattern (EIMN) to efficiently avoid the recombination effect while maintaining high light absorption in an ultrathin film format in which hot electron physics can contribute. Simulations show that an EIMN with a 10 nm layer of dielectric insulation provides essentially the same absorption as its EMN counterpart. Measurements on several EMN structures will be presented. This EIMN architecture may provide a practical route to high efficiency, hot electron solar cell technology using ultrathin films.[1]F. Ye, M.J. Burns, M.J. Naughton, Proc. SPIE 8111, 811103 (2011).[2]K. Kempa, M.J. Naughton, Z.F. Ren, A. Herczynski, T. Kirkpatrick, J. Rybczynski, Y. Gao, Appl. Phys. Lett. 95, 233121(2009)

  20. Charge-transfer optical absorption mechanism of DNA:Ag-nanocluster complexes

    Science.gov (United States)

    Longuinhos, R.; Lúcio, A. D.; Chacham, H.; Alexandre, S. S.

    2016-05-01

    Optical properties of DNA:Ag-nanoclusters complexes have been successfully applied experimentally in Chemistry, Physics, and Biology. Nevertheless, the mechanisms behind their optical activity remain unresolved. In this work, we present a time-dependent density functional study of optical absorption in DNA:Ag4. In all 23 different complexes investigated, we obtain new absorption peaks in the visible region that are not found in either the isolated Ag4 or isolated DNA base pairs. Absorption from red to green are predominantly of charge-transfer character, from the Ag4 to the DNA fragment, while absorption in the blue-violet range are mostly associated to electronic transitions of a mixed character, involving either DNA-Ag4 hybrid orbitals or intracluster orbitals. We also investigate the role of exchange-correlation functionals in the calculated optical spectra. Significant differences are observed between the calculations using the PBE functional (without exact exchange) and the CAM-B3LYP functional (which partly includes exact exchange). Specifically, we observe a tendency of charge-transfer excitations to involve purines bases, and the PBE spectra error is more pronounced in the complexes where the Ag cluster is bound to the purines. Finally, our results also highlight the importance of adding both the complementary base pair and the sugar-phosphate backbone in order to properly characterize the absorption spectrum of DNA:Ag complexes.

  1. The Optical Absorption Coefficient of Bean Seeds Investigated Using Photoacoustic Spectroscopy

    Science.gov (United States)

    Sanchez-Hernandez, G.; Hernandez-Aguilar, C.; Dominguez-Pacheco, A.; Cruz-Orea, A.; Perez-Reyes, M. C. J.; Martinez, E. Moreno

    2015-06-01

    A knowledge about seed optical parameters is of great relevance in seed technology practice. Such parameters provide information about its absorption and reflectance, which could be useful for biostimulation processes, by light sources, in early stages of seed germination. In the present research photoacoustic spectroscopy (PAS) and the Rosencwaig and Gersho model were used to determine the optical absorption coefficient () of five varieties of bean seeds ( Phaseolus vulgaris L.), of different productive cycles; the seeds were biostimulated by laser treatment to evaluate the effects of biostimulation pre-sowing. It was found that the bean varieties V1, V2, V4, and V5 were optically opaque in the visible spectrum; in the case of the V3 variety, this sample was optically transparent from 680 nm. The varieties of the studied bean seeds showed significant statistical differences in sizes and also in their optical absorption spectra. The biostimulation effects showed that the seed samples with a higher optical penetration length had a positive biostimulation, in the percentage of germination, obtaining an enhancement of 47 % compared to the control sample. The utility of PAS for the optical characterization of seeds has been demonstrated in this study of the laser biostimulation process of this kind of samples.

  2. Anisotropy of optical absorption and luminescent properties of CaMoO{sub 4}

    Energy Technology Data Exchange (ETDEWEB)

    Zakharko, Ya., E-mail: zakharko@electronics.wups.lviv.u [Faculty of Electronics, Ivan Franko National University of Lviv, 107 Tarnavskogo St., 79017 Lviv (Ukraine); Luchechko, A. [Faculty of Electronics, Ivan Franko National University of Lviv, 107 Tarnavskogo St., 79017 Lviv (Ukraine); Syvorotka, I.; Stryganyuk, G.; Solskii, I. [Institute for Materials, SRC ' Carat' , 202 Stryjska St., 79031 Lviv (Ukraine)

    2010-03-15

    Optical absorption, excitation and emission spectra, as well as photoluminescence decay time of CaMoO{sub 4} single crystals have been measured. It has been revealed that annealing of crystals in oxygen atmosphere leads to the disappearance of their anisotropic behavior in optical absorption, as well as in X-ray luminescence and decay time. Moreover, it has been found that annealing can significantly affect the value of the decay time. The relative intensity of the long-wavelength emission band increases under excitation in the region of indirect band-to-band transitions.

  3. Monitoring Mechanical Motion of Carbon Nanotube based Nanomotor by Optical Absorption Spectrum

    CERN Document Server

    Wang, Baomin; Wang, Zhan; Wang, Yong; Liu, Kaihui

    2016-01-01

    The optical absorption spectrums of nanomotors made from double-wall carbon nanotubes have been calculated with the time-dependent density functional based tight binding method. When the outer short tube of the nanomotor moves along or rotates around the inner long tube, the peaks in the spectrum will gradually evolve and may shift periodically, the amplitude of which can be as large as hundreds of meV. We show that the features and behaviors of the optical absorption spectrum could be used to monitor the mechanical motions of the double-wall carbon nanotube based nanomotor.

  4. Two- and three-dimensional models for analysis of optical absorption in tungsten disulphide single crystals

    Indian Academy of Sciences (India)

    Dhairya A Dholakia; G K Solanki; S G Patel; M K Agarwal

    2001-06-01

    The optical energy gaps of WS2 single crystal were determined from the analysis of the absorption spectrum near the fundamental absorption edge at room temperature using light parallel to -axis incident normally on the basal plane. On the basis of two- and three-dimensional models it was found that both direct and indirect band transitions took place in WS2 and the indirect transition was of the allowed type. The optical energy gaps corresponding to both transitions were determined and the phonon energies associated with the indirect transitions estimated. The implications of the results have been discussed.

  5. Optical Absorption of Sol-Gel Derived ZnO/TiO2 Nanocomposite Films

    Institute of Scientific and Technical Information of China (English)

    袁志好; 唐成春; 范守善

    2001-01-01

    ZnO/TiO2 nanocomposite films on quartz substrates were prepared by the sol-gel method, and the corresponding optical absorption properties were investigated. In the ultraviolet region, it was found that the position of fundamental absorption edge partially depends on the composition of the ZnO/TiO2 films, and shifts toward a shorter wavelength with the increasing content of ZnO in the films. Moreover, a blueshift of the absorption edge resulted from a quantum size effect and the quantum confinement effect was observed in the ZnO/TiO2 system.

  6. Absorption spectroscopy of cold caesium atoms confined in a magneto-optical trap

    Institute of Scientific and Technical Information of China (English)

    Yan Shu-Bin; Liu Tao; Geng Tao; Zhang Tian-Cai; Peng Kun-Chi; Wang Jun-Min

    2004-01-01

    Absorption spectra of cold caesium atoms confined in a magneto-optical trap are measured around D2 line at 852nm with a weak probe beam. Absorption reduction dip due to electromagnetically induced transparency (EIT)effect induced by the cooling/trapping field in a V-type three-level system and a gain peak near the cycling transition are clearly observed. Several mechanisms mixed with EIT effect in a normal V-type three-level system are briefly discussed. A simple theoretical analysis based on a dressed-state model is presented for interpretation of the absorption spectra.

  7. Polyethylene laser welding based on optical absorption variations

    Science.gov (United States)

    Galtieri, G.; Visco, A.; Nocita, D.; Torrisi, L.; Ceccio, G.; Scolaro, C.

    2016-04-01

    Polymeric materials, both pure and containing nanostructures, can be prepared as thin sheets in order to produce joints with an interface between an optically transparent sheet and an optically absorbent substrate to be welded by infrared pulsed laser irradiation. The Laser Transmission Welding (LTW) technique has been successfully applied in order to join two or more thermoplastic polymeric sheets that must have a similar chemical composition. In this research work, polymeric joints of Ultra High Molecular Weight Polyethylene sheets were realized, characterized and welded. Some polymer sheets were doped, at different concentrations, with carbon nano-particles absorbent the laser radiation. A pulsed laser operating in the wavelength region 532 nm with intensity of the order of 109 Watt/cm2 was employed to be transmitted by the transparent polymer and to be absorbed by the carbon enriched surface. At the interface of the two polymers the released energy induces melting, that is assisted by pressure, producing a fast and resistant welding zone. Mechanical and optical characterizations and surface analyses are presented and discussed.

  8. Effect of Sb2O3-doped on optical absorption of ZnO thin film

    Institute of Scientific and Technical Information of China (English)

    CHANG Chun-rong; LI Zi-quan; XU Yun-yun

    2006-01-01

    Sb2O3 doped ZnO thin film was prepared by RF magnetron sputtering technique.The influence of Sb2O3 on the structure and the optical absorption of ZnO thin film was studied by XPS,XRD apparatuses and UV-Vis spectrophotometer.The results show that doped Sb2O3 has affected atomic and electronic structures,growth modes of crystal grains and optical absorption of ZnO.The element Sb exists in many forms in the film including transpositional atoms and compounds such as Sb2O3,Zn7Sb2O14 etc.ZnO crystal grains grow in mixing directions.The lattice relaxation and the content of second phases increase when more Sb is doped.The UVA absorption of doped ZnO thin film increases obviously.The ultraviolet absorption peak narrows,absorption intensity increases,the absorption margin becomes steep and moves to shorter wavelength of about 5 nm,and the visible absorption increases in some sort.

  9. Scattering and absorption differential cross sections for double photon Compton scattering

    Indian Academy of Sciences (India)

    B S Sandhu; M B Saddi; B Singh; B S Ghumman

    2001-10-01

    The scattering and absorption differential cross sections for nonlinear QED process such as double photon Compton scattering have been measured as a function of independent final photon energy. The incident gamma photons are of 0.662 MeV in energy as produced by an 8 Ci137Cs radioactive source and thin aluminum foils are used as scatterer. The two simultaneously emitted photons in this process are detected in coincidence using two NaI(T1) scintillation detectors and a slow-fast coincidence set-up of 30 nsec resolving time. The measured values of scattering and absorption differential cross sections agree with theory within experimental estimated error.

  10. Optical absorption and near infrared emission properties of Nd 3+ ions in alkali lead tellurofluoroborate glasses

    Science.gov (United States)

    Saleem, S. A.; Jamalaiah, B. C.; Kumar, J. Suresh; Babu, A. Mohan; Moorthy, L. Rama; Jayasimhadri, M.; Jang, Kiwan; Lee, Ho Sueb; Yi, Soung Soo; Jeong, Jung Hyun

    2009-12-01

    Nd 3+ doped H 3BO 3-PbO-TeO 2-RF (R = Li, Na and K) glasses were prepared through melt quenching technique. Optical absorption and near infrared (NIR) fluorescence spectra were recorded at room temperature. The spectral intensities were analyzed in terms of the Judd-Ofelt (J-O) parameters ( Ω λ = 2, 4, 6). The covalency effect of Nd-O bond on the J-O parameters was estimated from the relative absorbance ratio (R) between 4I 9/2 → 4F 7/2 and 4I 9/2 → 4S 3/2 transitions. The effect of Nd-O covalency on the Ω4 and Ω6 intensity parameters as well as on the spontaneous emission probabilities ( AR) was discussed. Lomheim and Shazer hybrid method was applied to determine the fluorescence branching ratios ( βR) of each emission transition from the 4F 3/2 metastable level to its lower lying levels. The evaluated total radiative transition probabilities ( AT), stimulated emission cross-sections ( σe) and gain bandwidth parameters ( σe × Δ λP) were compared with the earlier reports.

  11. Optical absorption enhancement of CdTe nanostructures by low-energy nitrogen ion bombardment

    Science.gov (United States)

    Akbarnejad, E.; Ghoranneviss, M.; Mohajerzadeh, S.; Hantehzadeh, M. R.; Asl Soleimani, E.

    2016-02-01

    In this paper we present the fabrication of cadmium telluride (CdTe) nanostructures by means of RF magnetron sputtering followed by low-energy ion implantation and post-thermal treatment. We have thoroughly studied the structural, optical, and morphological properties of these nanostructures. The effects of nitrogen ion bombardment on the structural parameters of CdTe nanostructures such as crystal size, microstrain, and dislocation density have been examined. From x-ray diffractometer (XRD) analysis it could be deduced that N+ ion fluence and annealing treatment helps to form (3 0 0) orientation in the crystalline structure of cadmium-telluride films. Fluctuations in optical properties like the optical band gap and absorption coefficient as a function of N+ ion fluences have been observed. The annealing of the sample irradiated by a dose of 1018 ions cm-2 has led to great enhancement in the optical absorption over a wide range of wavelengths with a thickness of 250 nm. The enhanced absorption is significantly higher than the observed value in the original CdTe layer with a thickness of 3 μm. Surface properties such as structure, grain size and roughness are noticeably affected by varying the nitrogen fluences. It is speculated that nitrogen bombardment and post-annealing treatment results in a smaller optical band gap, which in turn leads to higher absorption. Nitrogen bombardment is found to be a promising method to increase efficiency of thin film solar cells.

  12. Kinetics of chromium ion absorption by cross-linked polyacrylate films

    Science.gov (United States)

    May, C. E.

    1984-01-01

    Three cross-linked ion exchange membranes were studied as to their ability to absorb chromium ion from aqueous chromium III nitrate solutions. Attention was given to the mechanism of absorption, composition of the absorbed product, and the chemical bonding. The membranes were: calcium polyacrylate, polyacrylic acid, and a copolymer of acrylic acid and vinyl alcohol. For the calcium polyacrylate and the copolymer, parabolic kinetics were observed, indicating the formation of a chromium polyacrylate phase as a coating on the membrane. The rate of absorption is controlled by the diffusion of the chromium ion through this coating. The product formed in the copolymer involves the formation of a coordination complex of a chromium ion with 6 carboxylic acid groups from the same molecule. The absorption of the chromium ion by the polyacrylic acid membranes appears to be more complicated, involving cross-linking. This is due to the coordination of the chromium ion with carboxylic acid groups from more than one polymer molecule. The absorption rate of the chromium ion by the calcium salt membrane was found to be more rapid than that by the free polyacrylic acid membrane.

  13. Thermally Induced Nonlinear Optical Absorption in Metamaterial Perfect Absorbers

    CERN Document Server

    Guddala, Sriram; Ramakrishna, S Anantha

    2015-01-01

    A metamaterial perfect absorber consisting of a tri-layer (Al/ZnS/Al) metal-dielectric-metal system with top aluminium nano-disks is fabricated by laser-interference lithography and lift-off processing. The metamaterial absorber had peak resonant absorbance at 1090 nm and showed nonlinear absorption for 600ps laser pulses at 1064 nm wavelength. A nonlinear saturation of reflectance was measured to be dependent on the average laser power incident and not the peak laser intensity. The nonlinear behaviour is shown to arise from the heating due to the absorbed radiation and photo-thermal changes in the dielectric properties of aluminium. The metamaterial absorber is seen to be damage resistant at large laser intensities of 25 MW/cm2.

  14. Absolute absorption cross-section and photolysis rate of I2

    Directory of Open Access Journals (Sweden)

    J. M. C. Plane

    2004-05-01

    Full Text Available Following recent observations of molecular iodine (I2 in the coastal marine boundary layer (MBL (Saiz-Lopez and Plane, 2004, it has become important to determine the absolute absorption cross-section of I2 at reasonably high resolution, and also to evaluate the rate of photolysis of the molecule in the lower atmosphere. The absolute absorption cross-section (σ of gaseous I2 at room temperature and pressure (295 K, 760 Torr was therefore measured between 182 and 750 nm using a Fourier Transform spectrometer at a resolution of 4 cm−1 (0.1 nm at λ=500 nm. The maximum absorption cross-section in the visible region was observed at λ=533.0 nm to be σ=(4.84±0.60×10−18cm2 molecule−1. The spectrum is available as supplementary material accompanying this paper. The photo-dissociation rate constant (J of gaseous I2 was also measured directly in a solar simulator, yielding J(I2=0.12±0.03 s−1 for the lower troposphere. This agrees well with the value of 0.15±0.03 s−1 calculated using the measured absorption cross-section, terrestrial solar flux for clear sky conditions and assuming a photo-dissociation yield of unity. A two-stream radiation transfer model was then used to determine the variation in photolysis rate with solar zenith angle (SZA, from which an analytic expression is derived for use in atmospheric models. Photolysis appears to be the dominant loss process for I2 during daytime, and hence an important source of iodine atoms in the lower atmosphere.

  15. Absorption Cross-section and Decay Rate of Rotating Linear Dilaton Black Holes

    CERN Document Server

    Sakalli, I

    2016-01-01

    We analytically study the scalar perturbation of non-asymptotically flat (NAF) rotating linear dilaton black holes (RLDBHs) in 4-dimensions. We show that both radial and angular wave equations can be solved in terms of the hypergeometric functions. The exact greybody factor (GF), the absorption cross-section (ACS), and the decay rate (DR) for the massless scalar waves are computed for these black holes (BHs). The results obtained for ACS and DR are discussed through graphs.

  16. Absorption cross-section and decay rate of rotating linear dilaton black holes

    Science.gov (United States)

    Sakalli, I.; Aslan, O. A.

    2016-02-01

    We analytically study the scalar perturbation of non-asymptotically flat (NAF) rotating linear dilaton black holes (RLDBHs) in 4-dimensions. We show that both radial and angular wave equations can be solved in terms of the hypergeometric functions. The exact greybody factor (GF), the absorption cross-section (ACS), and the decay rate (DR) for the massless scalar waves are computed for these black holes (BHs). The results obtained for ACS and DR are discussed through graphs.

  17. Accurate measurements of ozone absorption cross-sections in the Hartley band

    OpenAIRE

    2015-01-01

    Ozone plays a crucial role in tropospheric chemistry, is the third largest contributor to greenhouse radiative forcing after carbon dioxide and methane and also a toxic air pollutant affecting human health and agriculture. Long-term measurements of tropospheric ozone have been performed globally for more than 30 years with UV photometers, all relying on the absorption of ozone at the 253.65 nm line of mercury. We have re-determined this cross-section and report a value of 11...

  18. Accurate laser measurements of ozone absorption cross-sections in the Hartley band

    OpenAIRE

    2014-01-01

    Ozone plays a crucial role in tropospheric chemistry, is the third largest contributor to greenhouse radiative forcing after carbon dioxide and methane and also a toxic air pollutant affecting human health and agriculture. Long-term measurements of tropospheric ozone have been performed globally for more than 30 years with UV photometers, all relying on the absorption of ozone at the 253.65 nm line of mercury. We have re-determined this cross-section and rep...

  19. Optical absorption and refraction index change of a confined exciton in a spherical quantum dot nanostructure

    Science.gov (United States)

    Mathan Kumar, K.; John Peter, A.; Lee, C. W.

    2011-12-01

    Electronic energies of an exciton confined in a strained Zn1- x Cd x Se/ZnSe quantum dot have been computed as a function of dot radius with various Cd content. Calculations have been performed using Bessel function as an orthonormal basis for different confinement potentials of barrier height considering the internal electric field induced by the spontaneous and piezoelectric polarizations. The optical absorption coefficients and the refractive index changes between the ground state ( L = 0) and the first excited state ( L = 1) are investigated. It is found that the optical properties in the strained ZnCdSe/ZnSe quantum dot are strongly affected by the confinement potentials and the dot radii. The intensity of the total absorption spectra increases for the transition between higher levels. The obtained optical nonlinearity brings out the fact that it should be considered in calculating the optical properties in low dimensional semiconductors especially in quantum dots.

  20. Hybrid Microfluidic Platform for Multifactorial Analysis Based on Electrical Impedance, Refractometry, Optical Absorption and Fluorescence

    Directory of Open Access Journals (Sweden)

    Fábio M. Pereira

    2016-10-01

    Full Text Available This paper describes the development of a novel microfluidic platform for multifactorial analysis integrating four label-free detection methods: electrical impedance, refractometry, optical absorption and fluorescence. We present the rationale for the design and the details of the microfabrication of this multifactorial hybrid microfluidic chip. The structure of the platform consists of a three-dimensionally patterned polydimethylsiloxane top part attached to a bottom SU-8 epoxy-based negative photoresist part, where microelectrodes and optical fibers are incorporated to enable impedance and optical analysis. As a proof of concept, the chip functions have been tested and explored, enabling a diversity of applications: (i impedance-based identification of the size of micro beads, as well as counting and distinguishing of erythrocytes by their volume or membrane properties; (ii simultaneous determination of the refractive index and optical absorption properties of solutions; and (iii fluorescence-based bead counting.

  1. Intraband optical absorption in a single quantum ring: Hydrostatic pressure and intense laser field effects

    Science.gov (United States)

    Barseghyan, M. G.

    2016-11-01

    The intraband optical absorption in GaAs/Ga0.7Al0.3As two-dimensional single quantum ring is investigated. Considering the combined effects of hydrostatic pressure and intense laser field the energy of the ground and few excited states has been found using the effective mass approximation and exact diagonalization technique. The energies of these states and the corresponding threshold energy of the intraband optical transitions are examined as a function of hydrostatic pressure for the different values of the laser field parameter. We also investigated the dependencies of the intraband optical absorption coefficient as a function of incident photon energy for different values of hydrostatic pressure and laser field parameter. It is found that the effects of hydrostatic pressure and intense laser field lead to redshift and blueshift of the intraband optical spectrum respectively.

  2. Effect of Sn on the optical band gap determined using absorption spectrum fitting method

    Energy Technology Data Exchange (ETDEWEB)

    Heera, Pawan, E-mail: sramanb70@mailcity.com [Department of Physics, Himachal Pradesh University, Shimla, INDIA, 171005 (India); Govt. College Amb, Himachal Pradesh, INDIA,177203 (India); Kumar, Anup, E-mail: kumar.anup.sml@gmail.com [Department of Physics, Himachal Pradesh University, Shimla, INDIA, 171005 (India); Physics Department, Govt. College, Kullu, H. P., INDIA, 175101 (India); Sharma, Raman, E-mail: pawanheera@yahoo.com [Department of Physics, Himachal Pradesh University, Shimla, INDIA, 171005 (India)

    2015-05-15

    We report the preparation and the optical studies on tellurium rich glasses thin films. The thin films of Se{sub 30}Te{sub 70-x} Sn{sub x} system for x= 0, 1.5, 2.5 and 4.5 glassy alloys prepared by melt quenching technique are deposited on the glass substrate using vacuum thermal evaporation technique. The analysis of absorption spectra in the spectral range 400nm–4000 nm at room temperature obtained from UV-VIS-NIR spectrophotometer [Perkin Elmer Lamda-750] helps us in the optical characterization of the thin films under study. The absorption spectrum fitting method is applied by using the Tauc’s model for estimating the optical band gap and the width of the band tail of the thin films. The optical band gap is calculated and is found to decrease with the Sn content.

  3. The origin of enhanced optical absorption in solar cells with metal nanoparticles embedded in the active layer

    KAUST Repository

    Lee, Jung-Yong

    2010-04-29

    We analyze the enhancement in optical absorption of an absorbing medium when spherical metal nanoparticles are embedded in it. Our analysis uses generalized Mie theory to calculate the absorbed optical power as a function of the distance from the metal nanoparticle. This analysis is used to evaluate the potential of enhancing optical absorption in thin-film solar cells by embedding spherical metal nanoparticles. We consider the trade-off between maximizing overall optical absorption and ensuring that a large fraction of the incident optical power is dissipated in the absorbing host medium rather than in the metal nanoparticle. We show that enhanced optical absorption results from strong scattering by the metal nanoparticle which locally enhances the optical electric fields. We also discuss the effect of a thin dielectric encapsulation of the metal nanoparticles. ©2010 Optical Society of America.

  4. Quantitative comparisons of absorption cross-section spectra and integrated intensities of HFC-143a

    Science.gov (United States)

    Le Bris, Karine; Graham, Laura

    2015-01-01

    The integrated absorption cross-sections of HFC-143a (CH3CF3) differ substantially in the literature. This leads to an important uncertainty on the value of the radiative efficiency of this molecule. The ambiguity on the absorption cross-sections of HFC-143a is highlighted by the existence of two significantly different datasets in the HITRAN database. To solve the issue, we performed high-resolution Fourier transform infrared laboratory measurements of HFC-13a and compared the spectra with the two HITRAN datasets and with the data from the Pacific Northwest National Laboratory (PNNL). The experimental methods and data analysis techniques are examined and typical sources of errors are discussed. The integrated intensities of the main bands are compared to other literature values. It was found that the integrated absorption cross-section values in the highest range - around 13.8 ×10-17 cm .molecule-1 in the 570-1500 cm-1 spectral band - show the most consistency between authors.

  5. Chiral monolithic absorbent constructed by optically active helical-substituted polyacetylene and graphene oxide: preparation and chiral absorption capacity.

    Science.gov (United States)

    Li, Weifei; Wang, Bo; Yang, Wantai; Deng, Jianping

    2015-02-01

    Chiral monolithic absorbent is successfully constructed for the first time by using optically active helical-substituted polyacetylene and graphene oxide (GO). The preparative strategy is facile and straightforward, in which chiral-substituted acetylene monomer (Ma), cross-linker (Mb), and alkynylated GO (Mc) undergo copolymerization to form the desired monolithic absorbent in quantitative yield. The resulting monoliths are characterized by circular dichroism, UV-vis absorption, scanning electron microscopy (SEM), FT-IR, Raman, energy-dispersive spectrometer (EDS), X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET), XPS, and thermogravimetric analysis (TGA) techniques. The polymer chains derived from Ma form chiral helical structures and thus provide optical activity to the monoliths, while GO sheets contribute to the formation of porous structures. The porous structure enables the monolithic absorbents to demonstrate a large swelling ratio in organic solvents, and more remarkably, the helical polymer chains provide optical activity and further enantio-differentiating absorption ability. The present study establishes an efficient and versatile methodology for preparing novel functional materials, in particular monolithic chiral materials based on substituted polyacetylene and GO.

  6. Temperature dependent O3 absorption cross sections for GOME, SCIAMACHY and GOME-2: I. Re-analysis of Flight Model Data and Retrieval Tests.

    Science.gov (United States)

    Chehade, Wissam; Weber, Mark; Gorshelev, Victor; Serdyuchenko, Anna; Burrows, John P.

    For a long term coverage of global O3 measurements from SCIAMACHY (SCanning Imag-ing Absorption spectroMeter for Atmospheric CHartographY), GOME1, and GOME2 (Global Ozone Monitoring Experiment), high quality absorption cross section spectra is a pre-requisite. Laboratory measurements of cross section spectra of O3 (at 203K, 223K, 243K, 273K and 293K) were performed using CATGAS (Calibration Apparatus for Trace Gas Absorption Spec-troscopy) under representative in-flight conditions with SCIAMACHY and GOME-2 spectrom-eters to obviate the need of an instrumental slit function correction. For the data acquired from the CATGAS campaigns, a re-analysis is carried out to improve the overestimation in the total O3 retrieval by SCIAMACHY and GOME2 using the flight model (FM) reference data from SCIAMACHY and GOME2, respectively, with respect to GOME1. The reanalysis attempts to re-evaluate the concatenation of ozone optical density measurements obtained from CATGAS measurements and applying new ways to absolutely calibrate the cross-.sections using absolute reference cross-section data at reference wavelengths, Finally, a satellite retrieval error analy-sis will be performed to validate the updated satellite reference cross-sections. The updated reference data can be used for combining the data from the three instruments (plus the two upcoming GOME-2) generating a consisting long-term dataset of total ozone.

  7. Aerosol absorption measurement with a sinusoidal phase modulating fiber optic photo thermal interferometer

    Science.gov (United States)

    Li, Shuwang; Shao, Shiyong; Mei, Haiping; Rao, Ruizhong

    2016-10-01

    Aerosol light absorption plays an important role in the earth's atmosphere direct and semi-direct radiate forcing, simultaneously, it also has a huge influence on the visibility impairment and laser engineering application. Although various methods have been developed for measuring aerosol light absorption, huge challenge still remains in precision, accuracy and temporal resolution. The main reason is that, as a part of aerosol light extinction, aerosol light absorption always generates synchronously with aerosol light scattering, and unfortunately aerosol light scattering is much stronger in most cases. Here, a novel photo-thermal interferometry is proposed only for aerosol absorption measurement without disturbance from aerosol scattering. The photo-thermal interferometry consists of a sinusoidal phase-modulating single mode fiber-optic interferometer. The thermal dissipation, caused by aerosol energy from photo-thermal conversion when irritated by pump laser through interferometer, is detected. This approach is completely insensitive to aerosol scattering, and the single mode fiber-optic interferometer is compact, low-cost and insensitive to the polarization shading. The theory of this technique is illustrated, followed by the basic structure of the sinusoidal phase-modulating fiber-optic interferometer and demodulation algorithms. Qualitative and quantitative analysis results show that the new photo-thermal interference is a potential approach for aerosol absorption detection and environmental pollution detection.

  8. Optical absorption analysis of quaternary molybdate- and tungstate-ordered double perovskites

    Energy Technology Data Exchange (ETDEWEB)

    Tablero, C., E-mail: ctablero@etsit.upm.es

    2015-08-05

    Highlights: • These compounds present a high optical absorption. • The absorption coefficients using different DFT + U alternatives have been compared. • The absorption coefficients have been split into different contributions. • The maximum efficiency is near the maximum efficiency for multiple-gap solar cells. - Abstract: Quaternary-ordered double perovskite A{sub 2}MM′O{sub 6} (M = Mo,W) semiconductors are a group of materials with a variety of photocatalytic and optoelectronic applications. An analysis focused on the optoelectronic properties is carried out using first-principles density-functional theory with several U orbital-dependent one-electron potentials applied to different orbital subspaces. The structural non-equivalence of the atoms resulting from the symmetry has been taken in account. In order to analyze optical absorption in these materials deeply, the absorption coefficients have been split into inter- and intra-non-equivalent species contributions. The results indicate that the effect of the A and M′ atoms on the optical properties are minimal whereas the largest contribution comes from the non-equivalent O atoms to M transitions.

  9. Electro-Optical Multichannel Spectrometer for Transient Resonance Raman and Absorption Spectroscopy

    DEFF Research Database (Denmark)

    Hansen, Karina Benthin; Wilbrandt, Robert Walter; Pagsberg, Palle Bjørn

    1979-01-01

    An optical multichannel system is described, used for time‐dependent absorption measurements in the gas phase and the liquid phase and for resonance Raman spectroscopy of short‐lived transient species in the liquid phase in pulse radiolysis. It consists of either an image converter streak unit or...

  10. Tunable spin and valley dependent magneto-optical absorption in molybdenum disulfide quantum dots

    Science.gov (United States)

    Qu, Fanyao; Dias, A. C.; Fu, Jiyong; Villegas-Lelovsky, L.; Azevedo, David L.

    2017-01-01

    Photonic quantum computer, quantum communication, quantum metrology and quantum optical technologies rely on the single-photon source (SPS). However, the SPS with valley-polarization remains elusive and the tunability of magneto-optical transition frequency and emission/absorption intensity is restricted, in spite of being highly in demand for valleytronic applications. Here we report a new class of SPSs based on carriers spatially localized in two-dimensional monolayer transition metal dichalcogenide quantum dots (QDs). We demonstrate that the photons are absorbed (or emitted) in the QDs with distinct energy but definite valley-polarization. The spin-coupled valley-polarization is invariant under either spatial or magnetic quantum quantization. However, the magneto-optical absorption peaks undergo a blue shift as the quantization is enhanced. Moreover, the absorption spectrum pattern changes considerably with a variation of Fermi energy. This together with the controllability of absorption spectrum by spatial and magnetic quantizations, offers the possibility of tuning the magneto-optical properties at will, subject to the robust spin-coupled valley polarization.

  11. Optical absorption and luminescence in neutron-irradiated, silica-based fibers

    Energy Technology Data Exchange (ETDEWEB)

    Cooke, D.W.; Farnum, E.H.; Clinard, F.W. [Los Alamos National Lab., CA (United States)] [and others

    1995-04-01

    The objectives of this work are to assess the effects of thermal annealing and photobleaching on the optical absorption of neutron-irradiated, silica fibers of the type proposed for use in ITER diagnostics, and to measure x-ray induced luminescence of unirradiated (virgin) and neutron-irradiated fibers.

  12. Diameter grouping in bulk samples of single-walled carbon nanotubes from optical absorption spectroscopy

    NARCIS (Netherlands)

    Golden, M.S.; Fink, J.; Dunsch, L.; Bauer, H.-D.; Reibold, M.; Knupfer, M.; Friedlein, R.; Pichler, T.; Jost, O.

    1999-01-01

    The influence of the synthesis parameters on the mean characteristics of single-wall carbon nanotubes in soot produced by the laser vaporization of graphite has been analyzed using optical absorption spectroscopy. The abundance and mean diameter of the nanotubes were found to be most influenced by

  13. Tunable spin and valley dependent magneto-optical absorption in molybdenum disulfide quantum dots

    Science.gov (United States)

    Qu, Fanyao; Dias, A. C.; Fu, Jiyong; Villegas-Lelovsky, L.; Azevedo, David L.

    2017-01-01

    Photonic quantum computer, quantum communication, quantum metrology and quantum optical technologies rely on the single-photon source (SPS). However, the SPS with valley-polarization remains elusive and the tunability of magneto-optical transition frequency and emission/absorption intensity is restricted, in spite of being highly in demand for valleytronic applications. Here we report a new class of SPSs based on carriers spatially localized in two-dimensional monolayer transition metal dichalcogenide quantum dots (QDs). We demonstrate that the photons are absorbed (or emitted) in the QDs with distinct energy but definite valley-polarization. The spin-coupled valley-polarization is invariant under either spatial or magnetic quantum quantization. However, the magneto-optical absorption peaks undergo a blue shift as the quantization is enhanced. Moreover, the absorption spectrum pattern changes considerably with a variation of Fermi energy. This together with the controllability of absorption spectrum by spatial and magnetic quantizations, offers the possibility of tuning the magneto-optical properties at will, subject to the robust spin-coupled valley polarization. PMID:28112197

  14. Calculation of optical absorption and resonance Raman correlators using time-dependent recursion relationships

    DEFF Research Database (Denmark)

    Svendsen, Christian; Mortensen, O. Sonnich; Henriksen, Niels Engholm

    1996-01-01

    Time-dependent recursion relationships are derived for optical absorption and resonance Raman correlators in the multidimensional harmonic case using a second-quantization formalism. Furthermore, a procedure is given for the calculation of correlators involving a general analytic coordinate depen...... dependence of the transition dipole moment....

  15. Optical properties of black carbon aggregates with non-absorptive coating

    Science.gov (United States)

    Liu, Chao; Li, Ji; Yin, Yan; Zhu, Bin; Feng, Qian

    2017-01-01

    This study develops an idealized model to account for the effects of non-absorptive coating on the optical properties of black carbon (BC) aggregates. The classic fractal aggregate is applied to represent realistic BC particles, and the coating is assumed to be spherical. To accelerate the single-scattering simulation, BC monomers that were overlapped with coating sphere (not those completely inside the coating) are slightly moved to avoid overlapping. The multiple-sphere T-matrix method (MSTM) becomes applicable to calculate the optical properties of inhomogeneous particles with any coating amount, and is generally two orders of magnitude faster than the discrete-dipole approximation for particles we considered. Furthermore, the simple spherical coating is found to have similar effects on the optical properties to those based on more complicated coating structure. With the simple particle model and the efficient MSTM, it becomes possible to consider the influence of coating with much more details. The non-absorptive coating of BC aggregates can significantly enhance BC extinction and absorption, which is consistent with previous studies. The absorption of coated aggregates can be over two times stronger than that of BC particles without coating. Besides the coating volume, the relative position between the mass centers of BC aggregate and coating also plays an important role on the optical properties, and should obviously be considered in further studies.

  16. Electromagnetically induced absorption and transparency in an optical-rf two-photon coupling configuration

    Energy Technology Data Exchange (ETDEWEB)

    Fu Guangsheng [College of Physical Science and Technology, Hebei University, Baoding 071002 (China); Li Xiaoli [College of Physical Science and Technology, Hebei University, Baoding 071002 (China)], E-mail: xiaolixiaoli001@yahoo.com.cn; Zhuang Zhonghong; Zhang Lianshui; Yang Lijun; Li Xiaowei; Han Li [College of Physical Science and Technology, Hebei University, Baoding 071002 (China); Manson, Neil B.; Wei Changjiang [Laser Physics Center, Research School of Physical Sciences and Engineering, Australian Nation University, Canberra, ACT 0200 (Australia)

    2008-01-07

    We study electromagnetically induced absorption (EIA) and transparency (EIT) in an optical-rf two-photon coupling configuration. It is shown that the interference effect due to interacting dark resonances results in an EIA for a resonant two-photon coupling and this EIA is observed to evolve into an EIT when there is a detuning in the two-photon coupling.

  17. Ultrafast terahertz conductivity and transient optical absorption spectroscopy of silicon nanocrystal thin films

    DEFF Research Database (Denmark)

    Titova, Lyubov V.; Harthy, Rahma Al; Cooke, David

    We use time-resolved THz spectroscopy and transient optical absorption spectroscopy as two complementary techniques to study ultrafast carrier dynamics in silicon nanocrystal thin films. We find that the photoconductive dynamics in these materials is dominated by interface trapping, and we observe...... several different relaxation mechanisms for photoexcited carriers...

  18. Influence of refractive index and solar concentration on optical power absorption in slabs

    Science.gov (United States)

    Williams, M. D.

    1988-01-01

    The optical power absorbed by a slab at the focus of a parabolic dish concentrator is calculated. The calculations are plotted versus maximum angle of incidence of irradiation (which corresponds to solar concentration) with absorption coefficient as a parameter for several different indices of refraction that represent real materials.

  19. The Cross-correlation of MgII Absorption and Galaxies in BOSS

    CERN Document Server

    Pérez-Ràfols, Ignasi; Lundgren, Britt; Ge, Jian; Petitjean, Patrick; Schneider, Donald P; York, Donald G; Weaver, Benjamin A

    2014-01-01

    We present a measurement of the cross-correlation of MgII absorption and massive galaxies, using the DR11 galaxy sample of the Baryon Oscillation Spectroscopic Survey of SDSS-III, and the DR7 quasar spectra of SDSS-II. The cross-correlation is measured by stacking quasar absorption spectra shifted to the redshift of galaxies that are within a certain impact parameter bin of the quasar, after dividing by a quasar continuum model. This results in an average MgII equivalent width as a function of impact parameter from a galaxy, ranging from 50 kpc to more than 10 Mpc in proper units, which includes all MgII absorbers. We show that special care needs to be taken to use an unbiased quasar continuum estimator, to avoid systematic errors in the measurement of the mean stacked MgII equivalent width. The measured cross-correlation follows the expected shape of the galaxy correlation function, although measurement errors are large. We use the cross-correlation amplitude to derive the bias factor of MgII absorbers, find...

  20. Role of transfer of coherence in the enhanced absorption Hanle effect with two optical fields

    Energy Technology Data Exchange (ETDEWEB)

    Ram, Nibedita; Anupriya, J; Pattabiraman, M; Vijayan, C, E-mail: pattu@physics.iitm.ac.i [Department of Physics, Indian Institute of Technology, Madras, Chennai 600036 (India)

    2009-09-14

    The enhanced absorption Hanle effect has been studied for a closed transition J{sub g} = 2 -> J{sub e} = 3 with a transverse magnetic field in the presence of a coupling optical field. From an analysis of the individual probe and coupling field absorption profiles, it is shown that the Hanle electromagnetically induced absorption is governed by the transfer of {Delta}m = +-2 and {Delta}m = +-1 Zeeman coherences from the excited state to the ground state via spontaneous emission. The individual coherence contributions are governed by the intensity ratio of the optical fields. We show by computation and experiment that the magnetic field dependence of the forward scattered intensity can be used to distinguish the transfer of coherence contributions to the Hanle profile.

  1. Theory of edge-state optical absorption in two-dimensional transition metal dichalcogenide flakes

    Science.gov (United States)

    Trushin, Maxim; Kelleher, Edmund J. R.; Hasan, Tawfique

    2016-10-01

    We develop an analytical model to describe sub-band-gap optical absorption in two-dimensional semiconducting transition metal dichalcogenide (s-TMD) nanoflakes. The material system represents an array of few-layer molybdenum disulfide crystals, randomly orientated in a polymer matrix. We propose that optical absorption involves direct transitions between electronic edge states and bulk bands, depends strongly on the carrier population, and is saturable with sufficient fluence. For excitation energies above half the band gap, the excess energy is absorbed by the edge-state electrons, elevating their effective temperature. Our analytical expressions for the linear and nonlinear absorption could prove useful tools in the design of practical photonic devices based on s-TMDs.

  2. Diffuse optical characterization of collagen absorption from 500 to 1700 nm

    Science.gov (United States)

    Sekar, Sanathana Konugolu Venkata; Bargigia, Ilaria; Mora, Alberto Dalla; Taroni, Paola; Ruggeri, Alessandro; Tosi, Alberto; Pifferi, Antonio; Farina, Andrea

    2017-01-01

    Reduction in scattering, high absorption, and spectral features of tissue constituents above 1000 nm could help in gaining higher spatial resolution, penetration depth, and specificity for in vivo studies, opening possibilities of near-infrared diffuse optics in tissue diagnosis. We present the characterization of collagen absorption over a broadband range (500 to 1700 nm) and compare it with spectra presented in the literature. Measurements were performed using a time-domain diffuse optical technique. The spectrum was extracted by carefully accounting for various spectral distortion effects, due to sample and system properties. The contribution of several tissue constituents (water, lipid, collagen, oxy, and deoxy-hemoglobin) to the absorption properties of a collagen-rich in vivo bone location, such as radius distal in the 500- to 1700-nm wavelength region, is also discussed, suggesting bone diagnostics as a potential area of interest.

  3. Optical pumping effect in absorption imaging of F =1 atomic gases

    Science.gov (United States)

    Kim, Sooshin; Seo, Sang Won; Noh, Heung-Ryoul; Shin, Y.

    2016-08-01

    We report our study of the optical pumping effect in absorption imaging of 23Na atoms in the F =1 hyperfine spin states. Solving a set of rate equations for the spin populations in the presence of a probe beam, we obtain an analytic expression for the optical signal of the F =1 absorption imaging. Furthermore, we verify the result by measuring the absorption spectra of 23Na Bose-Einstein condensates prepared in various spin states with different probe-beam pulse durations. The analytic result can be used in the quantitative analysis of F =1 spinor condensate imaging and readily applied to other alkali-metal atoms with I =3 /2 nuclear spin such as 87Rb.

  4. Optical absorption enhancement in silicon nanowire arrays with a large lattice constant for photovoltaic applications.

    Science.gov (United States)

    Lin, Chenxi; Povinelli, Michelle L

    2009-10-26

    In this paper, we use the transfer matrix method to calculate the optical absorptance of vertically-aligned silicon nanowire (SiNW) arrays. For fixed filling ratio, significant optical absorption enhancement occurs when the lattice constant is increased from 100 nm to 600 nm. The enhancement arises from an increase in field concentration within the nanowire as well as excitation of guided resonance modes. We quantify the absorption enhancement in terms of ultimate efficiency. Results show that an optimized SiNW array with lattice constant of 600 nm and wire diameter of 540 nm has a 72.4% higher ultimate efficiency than a Si thin film of equal thickness. The enhancement effect can be maintained over a large range of incidence angles.

  5. Shape dependency of the extinction and absorption cross sections of dust aerosols modeled as randomly oriented spheroids

    Directory of Open Access Journals (Sweden)

    R. Wagner

    2011-09-01

    Full Text Available We present computational results on the shape dependency of the extinction and absorption cross sections of dustlike aerosol particles that were modeled as randomly oriented spheroids. Shape dependent variations in the extinction cross sections are largest in the size regime that is governed by the interference structure. Elongated spheroids best fitted measured extinction spectra of re-dispersed Saharan dust samples. For dust particles smaller than 1.5 μm in diameter and low absorption potential, shape effects on the absorption cross sections are very small.

  6. Optical absorption of neutron-irradiated silica fibers

    Energy Technology Data Exchange (ETDEWEB)

    Cooke, D.W.; Farnum, E.H.; Bennett, B.L. [Los Alamos National Lab., NM (United States)

    1996-10-01

    Induced-loss spectra of silica-based optical fibers exposed to high (10{sup 23} n-m{sup {minus}2}) and low (10{sup 21} n-m{sup {minus}2}) fluences of neutrons at the Los Alamos Spallation Radiation Effects Facility (LASREF) have been measured. Two types of fibers consisting of a pure fused silica core with fluorine-doped ({approximately}4 mole %) cladding were obtained from Fiberguide Industries and used in the as-received condition. Anhydroguide{trademark} and superguide{trademark} fibers contained less than 1 ppm, and 600 to 800 ppm of OH, respectively. The data suggest that presently available silica fibers can be used in plasma diagnostics, but the choice and suitability depends upon the spectral region of interest. Low-OH content fibers can be used for diagnostic purposes in the interval {approximately}800 to 1400 mn if the exposure is to high-fluence neutrons. For low-fluence neutron exposures, the low-OH content fibers are best suited for use in the interval {approximately}800 to 2000 nm, and the high-OH content fibers are the choice for the interval {approximately}400 to 800 nm.

  7. Linear and nonlinear optical absorption coefficients of two-electron spherical quantum dot with parabolic potential

    Science.gov (United States)

    Çakır, Bekir; Yakar, Yusuf; Özmen, Ayhan

    2015-02-01

    Linear and nonlinear absorption coefficients of two-electron spherical quantum dot (QD) with parabolic potential are investigated in this paper. Wave functions and energy eigenvalues of the 1s2, 1s1p, 1s1d and 1s1f electronic states have been computed by using an optimization approach, which is a combination of Quantum Genetic Algorithm (QGA) and Hartree-Fock Roothaan (HFR) method. It is found that the strength of S→P transition is stronger than P→D and D→F transitions. Also the peak positions and amplitudes of the absorption coefficients are sensitive to the electron spin. It should be noted that the peak positions and amplitudes of absorption coefficients are strongly dependent on the parabolic potential. Additionally, dot radius, impurity charge, incident optical intensity and relaxation time have a great influence on the linear and nonlinear absorption coefficients.

  8. Linear and nonlinear optical absorption coefficients of two-electron spherical quantum dot with parabolic potential

    Energy Technology Data Exchange (ETDEWEB)

    Çakır, Bekir, E-mail: bcakir@selcuk.edu.tr [Physics Department, Faculty of Science, Selcuk University, Campus 42075, Konya (Turkey); Yakar, Yusuf, E-mail: yuyakar@yahoo.com [Physics Department, Faculty of Arts and Science, Aksaray University, Campus 68100, Aksaray (Turkey); Özmen, Ayhan [Physics Department, Faculty of Science, Selcuk University, Campus 42075, Konya (Turkey)

    2015-02-01

    Linear and nonlinear absorption coefficients of two-electron spherical quantum dot (QD) with parabolic potential are investigated in this paper. Wave functions and energy eigenvalues of the 1s{sup 2}, 1s1p, 1s1d and 1s1f electronic states have been computed by using an optimization approach, which is a combination of Quantum Genetic Algorithm (QGA) and Hartree–Fock Roothaan (HFR) method. It is found that the strength of S→P transition is stronger than P→D and D→F transitions. Also the peak positions and amplitudes of the absorption coefficients are sensitive to the electron spin. It should be noted that the peak positions and amplitudes of absorption coefficients are strongly dependent on the parabolic potential. Additionally, dot radius, impurity charge, incident optical intensity and relaxation time have a great influence on the linear and nonlinear absorption coefficients.

  9. Optical Absorption Measurements on Nitrogen-doped 6H-SiC Single Crystals

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    6H-SiC bulk crystals have been prepared by sublimation method in an inductively heated growth reactor. The effect of nitrogen doping on absorption for 6H-SiC was investigated. The absorption measurement based on optical method is a non-destructive and non-contact method. The band-gap narrowing with higher doping concentration was observed.For n-type doping below band-gap absorption band at 623 nm for 6H-SiC was observed. The peak intensity of the absorption band increased with increasing charge carrier concentration obtained from Hall measurements. It is also found that the nitrogen doping level decreased in the radial direction and it was the highest at the beginning of growth.

  10. Long Wavelength Plasmonic Absorption Enhancement in Silicon Using Optical Lithography Compatible Core-Shell-Type Nanowires

    Directory of Open Access Journals (Sweden)

    Mohammed Shahriar Sabuktagin

    2014-01-01

    Full Text Available Plasmonic properties of rectangular core-shell type nanowires embedded in thin film silicon solar cell structure were characterized using FDTD simulations. Plasmon resonance of these nanowires showed tunability from  nm. However this absorption was significantly smaller than the Ohmic loss in the silver shell due to very low near-bandgap absorption properties of silicon. Prospect of improving enhanced absorption in silicon to Ohmic loss ratio by utilizing dual capability of these nanowires in boosting impurity photovoltaic effect and efficient extraction of the photogenerated carriers was discussed. Our results indicate that high volume fabrication capacity of optical lithography techniques can be utilized for plasmonic absorption enhancement in thin film silicon solar cells over the entire long wavelength range of solar radiation.

  11. All-optical switching in a symmetric three-waveguide coupler with phase-mismatched absorptive central waveguide.

    Science.gov (United States)

    Chen, Yijing; Ho, Seng-Tiong; Krishnamurthy, Vivek

    2013-12-20

    All-optical switching operation based on manipulation of absorption in a three-waveguide directional coupler is theoretically investigated. The proposed structure consists of one absorptive central waveguide and two identical passive side waveguides. Optically induced absorption change in the central waveguide effectively controls the coupling of light between the two side waveguides, leading to optical switching action. The proposed architecture alleviates the fabrication challenges and waveguide index matching conditions that limit previous demonstrations of similar switching schemes based on a two-waveguide directional coupler. The proposed device accommodates large modal index difference between absorptive and passive waveguides without compromising the switching extinction ratio.

  12. Absorption cross section for the 5νOH stretch of acetic acid and peracetic acid

    Science.gov (United States)

    Begashaw, I. G.; Collingwood, M.; Bililign, S.

    2009-12-01

    We report measurements of the absorption cross sections for the vibrational O-H stretch (5νOH) overtone transitions in glacial acetic acid and peracetic acid. The photochemistry that results from overtone excitation has been shown to lead to OH radical production in molecules containing O-H (HNO3, H2O2). In addition the overtone excitation has been observed to result in light initiated chemical reaction. A Cavity ring-down spectroscopy (CRDS) instrument comprising of an Nd:YAG pumped dye laser and 620nm high reflectivity mirrors (R=99.995%) was used to measure the cross sections. The dye laser wavelength was calibrated using water vapor spectrum and the HITRAN 2008 database. The instrument’s minimum detectable absorption is αmin =4.5 *10-9cm-1 Hz-1/2 at 2σ noise level near the peak of the absorption feature. This measurement is the first for acetic acid at this excitation level. Preliminary results for acetic acid show the peak occurs near 615nm. Procedures for separating the monomer and dimer contribution will be presented. We would like to acknowledge support from NSF award #0803016 and NOAA-EPP award #NA06OAR4810187.

  13. Approximate Marginalization of Absorption and Scattering in Fluorescence Diffuse Optical Tomography

    CERN Document Server

    Mozumder, Meghdoot; Arridge, Simon; Kaipio, Jari P; d'Andrea, Cosimo; Kolehmainen, Ville

    2015-01-01

    In fluorescence diffuse optical tomography (fDOT), the reconstruction of the fluorophore concentration inside the target body is usually carried out using a normalized Born approximation model where the measured fluorescent emission data is scaled by measured excitation data. One of the benefits of the model is that it can tolerate inaccuracy in the absorption and scattering distributions that are used in the construction of the forward model to some extent. In this paper, we employ the recently proposed Bayesian approximation error approach to fDOT for compensating for the modeling errors caused by the inaccurately known optical properties of the target in combination with the normalized Born approximation model. The approach is evaluated using a simulated test case with different amount of error in the optical properties. The results show that the Bayesian approximation error approach improves the tolerance of fDOT imaging against modeling errors caused by inaccurately known absorption and scattering of the...

  14. Characteristic features of optical absorption for Gd2O3 and NiO nanoparticles

    Science.gov (United States)

    Zatsepin, A. F.; Kuznetsova, Yu. A.; Rychkov, V. N.; Sokolov, V. I.

    2017-03-01

    The technical approach to determination of the structural and optical parameters of oxides with reduced dimensionality based on optical absorption measurements is described by example of gadolinium and nickel oxides. It was established that the temperature behavior of fundamental absorption edge for oxide nanoparticles is similar with the bulk materials with crystal structure. At the same time, the energy characteristics (band gap and effective phonon energies) for low-dimensional oxides are found to be significantly different from their bulk counterparts. The presented methodological method to obtain of qualitative and quantitative correlations of structural and optical characteristics provides novel reliable knowledge of nanoscaled 3d and 4f-metal oxide materials that is useful for development of their practical applications.

  15. Annealed silver-islands for enhanced optical absorption in organic solar cell

    Energy Technology Data Exchange (ETDEWEB)

    Otieno, Francis, E-mail: frankotienoo@gmail.com [Material Physics Research Institute, School of Physics, University of the Witwatersrand, Private Bag 3, Wits, 2050Johannesburg (South Africa); Materials for Energy Research Group, University of the Witwatersrand, Private Bag 3, Wits, 2050 Johannesburg (South Africa); Airo, Mildred [School of Chemistry, University of the Witwatersrand, Private Bag 3, Wits, 2050 (South Africa); Ranganathan, Kamalakannan [School of Chemistry, University of the Witwatersrand, Private Bag 3, Wits, 2050 (South Africa); DST-NRF Centre of Strong Materials and the Molecular Sciences Institute, School of Chemistry, University of the Witwatersrand, 2193 Johannesburg (South Africa); Wamwangi, Daniel [Material Physics Research Institute, School of Physics, University of the Witwatersrand, Private Bag 3, Wits, 2050Johannesburg (South Africa); Materials for Energy Research Group, University of the Witwatersrand, Private Bag 3, Wits, 2050 Johannesburg (South Africa)

    2016-01-01

    Silver nano-islands are explored for enhancing optical absorption and photo-conversion efficiency in organic solar cells (OSCs) based on the surface plasmon resonance effect under diverse annealing conditions. Ag nano-islands have been deposited by RF magnetron sputtering at 15 W for 10 s and subsequently annealed between 100 °C–250 °C in air and Argon ambient. The optical properties of the reconstructed Ag islands demonstrate an increase and a blue shift in the absorption bands with increasing annealing temperature. This is the localized surface plasmon effect due to the Ag islands of diverse sizes, shapes and coverages. The increase in optical absorption with temperature is attributed to changes in island shape and density as collaborated by atomic force microscopy and TEM. As a proof of concept, an organic solar cell was characterized for current–voltage (I–V) measurements under dark and under solar simulated white light. Incorporation of annealed Ag islands has yielded an efficiency increment of between 4–24%. - Highlights: • RF Sputtering can be used to produce Ag NPs at low power. • Annealing enhances size, shape reconstruction as well as inter-particle separation. • Annealing in Argon ambient is more suitable than in air. • Ag NPs annealed at 250 °C enhances device absorption and PCE by up to 24%.

  16. Influence of TiO2 nanostructures on the optical absorption of organic-inorganic perovskite

    Science.gov (United States)

    Liu, Zongyi; Ye, Mao; Ostrowski, Michel; Yi, Ya Sha

    2016-04-01

    This work aims to reveal the strong influence of TiO2 nanostructures on the light absorption property of TiO2 and perovskite mixture. Three TiO2 nanostructures, i.e., nanoparticles (S1), ultrapure nanorods (S2), and ultrasmall nanorods (S3), were studied: S1 was selected as a baseline; S2 and S3 were synthesized from S1 by using modified hydrothermal processes. Mesoporous TiO2 thin films were spin-coated from solutions containing these TiO2 nanorods and nanoparticles (S1 as baseline). Organic-inorganic hybrid perovskite CH3NH3PbI3 was then incorporated into these mesoporous TiO2 thin films. Optical absorption results showed that the perovskite mixture with ultrasmall TiO2 nanostructures (S3) has significantly higher optical absorption coefficient. Finite-difference time domain models were built based on three distinct nanostructures of TiO2 and CH3NH3PbI3 mixtures fabricated (S1 to S3) to understand their optical absorption properties. Our work is promising to fabricate TiO2 nanostructures, as a backbone structure, for a series of applications including photovoltaics and photodetection.

  17. Breaking inversion symmetry induces excitonic peak in optical absorption of topological semimetal

    Science.gov (United States)

    Dadsetani, Mehrdad; Ebrahimian, Ali

    2017-01-01

    In this work we present ab initio study on linear optical properties of Dirac and Weyl semimetals and tried to find the consequences of inversion symmetry breaking in the optical properties of topological semimetal. The real and imaginary part of dielectric function in addition to energy loss spectra of topological semimetal with and without inversion symmetry have been calculated within Random phase approximation (RPA) then the electron-hole interaction is included by solving the Bethe-Salpeter Equation (BSE) for the electron-hole Green's function. We find that the lack of inversion symmetry and spin-orbit interaction increases the density of states at Fermi level, giving rise to excitonic peak in optical absorption of topological semimetal. It is remarkable that the excitonic effects in high energy range of the spectrum are stronger than in the lower one. To explore the breaking of inversion symmetry related optical properties, we have investigated the optical properties of Dirac semimetals Na3Bi and BaPt and compared them to corresponding ones in Weyl semimetals NbP and Na3Bi0.75Sb0.25. Our calculations show that NbP, which lacks inversion symmetry, has high energy exciton at 10 and 10.8 eV. In contrast with Na3Bi, electron-hole interactions give rise to several weak peaks at different energy in the optical absorption of Na3Bi0.75Sb0.25 while its red shift is less pronounced.

  18. Comparison of liposome entrapment parameters by optical and atomic absorption spectrophotometry.

    Science.gov (United States)

    Yoss, N L; Popescu, O; Pop, V I; Porutiu, D; Kummerow, F A; Benga, G

    1985-01-01

    Methods for the complete characterization of liposomes prepared by ether-injection are described in detail. The validity of atomic absorption spectrophotometry for measuring markers of trapped volume was checked by comparative determinations of markers with established optical spectrophotometrical methods. The favorable results using atomic absorption spectrophotometry to quantitate the marker Mn2+ are of particular relevance as manganese ion is also the paramagnetic probe in n.m.r. measurements of water permeability of liposomes; our results indicate that in such measurements no other marker need be incorporated.

  19. Optical absorption and electrical transport in hybrid TiO2 and polymer nanocomposite films

    Science.gov (United States)

    Zhou, Xi-Song; Li, Zheng; Wang, Ning; Lin, Yuan-Hua; Nan, Ce-Wen

    2006-06-01

    Hybrid nanofilms of poly(2-methoxy-5-ethylhexyloxy-1,4-phenylene)vinylene (MEH-PPV) and anatase-TiO2 nanoparticles were prepared. The results showed that the optical absorption spectra and electrical transport properties of the TiO2/MEH-PPV nanocomposite films were strongly dependent on the particle size and concentration of TiO2 nanoparticles in the hybrid films. In comparison with pure TiO2 nanofilms, the hybrid TiO2/MEH-PPV films presented a shift of the absorption edge to the lower-energy region, and an obvious nonlinear current-voltage characteristic.

  20. Recent Progress Towards Quantum Dot Solar Cells with Enhanced Optical Absorption.

    Science.gov (United States)

    Zheng, Zerui; Ji, Haining; Yu, Peng; Wang, Zhiming

    2016-12-01

    Quantum dot solar cells, as a promising candidate for the next generation solar cell technology, have received tremendous attention in the last 10 years. Some recent developments in epitaxy growth and device structures have opened up new avenues for practical quantum dot solar cells. Unfortunately, the performance of quantum dot solar cells is often plagued by marginal photon absorption. In this review, we focus on the recent progress made in enhancing optical absorption in quantum dot solar cells, including optimization of quantum dot growth, improving the solar cells structure, and engineering light trapping techniques.

  1. Recent Progress Towards Quantum Dot Solar Cells with Enhanced Optical Absorption

    Science.gov (United States)

    Zheng, Zerui; Ji, Haining; Yu, Peng; Wang, Zhiming

    2016-05-01

    Quantum dot solar cells, as a promising candidate for the next generation solar cell technology, have received tremendous attention in the last 10 years. Some recent developments in epitaxy growth and device structures have opened up new avenues for practical quantum dot solar cells. Unfortunately, the performance of quantum dot solar cells is often plagued by marginal photon absorption. In this review, we focus on the recent progress made in enhancing optical absorption in quantum dot solar cells, including optimization of quantum dot growth, improving the solar cells structure, and engineering light trapping techniques.

  2. Absorption spectroscopy measurements in optically dense explosive fireballs using a modeless broadband dye laser.

    Science.gov (United States)

    Glumac, Nick

    2009-09-01

    A modeless broadband dye laser is applied to probe inside optically dense fireballs generated by high explosives using single-shot, high resolution absorption spectroscopy. Despite attenuation of the main beam by 98%, high signal-to-noise ratio absorption spectra of Al, Ti, and AlO are readily obtained at resolutions of 0.007 nm, and luminosity from the fireball is strongly rejected. Detection limits for atomic species are less than 200 ppb. The method offers good time resolution of chemistry within the fireball, and scaling laws suggest that this technique should be valid in explosives tests at least up to the gram scale.

  3. A CO J=1-0 Survey of common optical/uv absorption sightlines

    CERN Document Server

    Liszt, H S

    2009-01-01

    Context: Over the past thirty years a wealth of observations of CO and other molecules in optical/uv absorption in diffuse clouds has accumulated for which no comparable CO emission line data exist. Aims: To acquire mm-wave J=1-0 CO emission line profiles toward a substantial sample of commonly-studied optical/uv absorption line targets and to compare with the properties of the absorbing gas, especially the predicted emission line strengths. Methods: Using the ARO 12m telescope we observed mm-wavelength J=1-0 CO emission with spectral resolution R ~ 3x10^6 and spatial resolution 1' toward a sample of 110 lines of sight previously studied in optical/uv absorption lines of CO, \\HH, CH, etc. Results: Interstellar CO emission was detected along 65 of the 110 lines of sight surveyed and there is a general superabundance of CO emission given the distribution of galactic latitudes in the survey sample. Much of the emission is optically thick or very intense and must emanate from dark clouds or warm dense gas near HI...

  4. Optical absorption in asymmetric double quantum wells driven by two intense terahertz fields

    Institute of Scientific and Technical Information of China (English)

    Wu Hong-Wei; Mi Xian-Wu

    2013-01-01

    Optical absorption is investigated for asymmetric double quantum wells driven by a resonant terahertz field and a varied terahertz field,both polarized along the growth direction.Rich nonlinear dynamics of the replica peak and the Autler-Townes splitting of various dressed states are systematically studied in undoped asymmetric double quantum wells by taking account of multiple factors,such as the frequency of the varied terahertz field and the strength of the resonant terahertz field.Each electron subband splits into two dressed states when the resonant terahertz field is applied in the absence of the varied terahertz field,the optical absorption spectrum shows the first-order Autler-Townes splitting of the electron subbands.When a varied terahertz field is added into the resonant system,the replica peak and the second-order Autler-Townes splitting of the dressed states near the band edge respectively emerge when the varied terahertz field is non-resonant and resonant with these dressed states.Wben the strength of the resonant terahertz field is increased,the first-order Autler-Townes double peaks and the replica peak in the optical absorption spectrum shift with the shifts of the dressed states.The presented results have potential applications in electro-optical devices.

  5. Matrix formalism for light propagation and absorption in thick textured optical sheets.

    Science.gov (United States)

    Eisenlohr, Johannes; Tucher, Nico; Höhn, Oliver; Hauser, Hubert; Peters, Marius; Kiefel, Peter; Goldschmidt, Jan Christoph; Bläsi, Benedikt

    2015-06-01

    In this paper, we introduce a simulation formalism for determining the Optical Properties of Textured Optical Sheets (OPTOS). Our matrix-based method allows for the computationally-efficient calculation of non-coherent light propagation and absorption in thick textured sheets, especially solar cells, featuring different textures on front and rear side that may operate in different optical regimes. Within the simulated system, the angular power distribution is represented by a vector. This light distribution is modified by interaction with the surfaces of the textured sheets, which are described by redistribution matrices. These matrices can be calculated for each individual surface texture with the most appropriate technique. Depending on the feature size of the texture, for example, either ray- or wave-optical methods can be used. The comparison of the simulated absorption in a sheet of silicon for a variety of surface textures, both with the results from other simulation techniques and experimentally measured data, shows very good agreement. To demonstrate the versatility of this newly-developed approach, the absorption in silicon sheets with a large-scale structure (V-grooves) at the front side and a small-scale structure (diffraction grating) at the rear side is calculated. Moreover, with minimal computational effort, a thickness parameter variation is performed.

  6. Ab initio many-body calculations of the 4He photo-absorption cross section

    CERN Document Server

    Schuster, Micah D; Johnson, Calvin W; Jurgenson, Eric D; Navratil, Petr

    2013-01-01

    A major goal of nuclear theory is to make quantitative calculations of low-energy nuclear observables starting from microscopic internucleon forces. Computationally, this is complicated by the large model spaces needed to reach convergence in many-body approaches, such as the no-core shell model (NCSM). In recent years, the similarity renormalization group (SRG) has provided a powerful and versatile means to soften interactions for ab initio structure calculations, thus leading to convergence within smaller model spaces. Here we compute the 4He total photo absorption cross section and study, for the first time, the consistency of the SRG approach in a continuum observable.

  7. Initial investigation of the wavelength dependence of optical properties measured with a new multi-pass aerosol extinction differential optical absorption spectrometer (AE-DOAS

    Directory of Open Access Journals (Sweden)

    R. T. Chartier

    2011-10-01

    Full Text Available Atmospheric aerosols directly affect climate by scattering and absorbing radiation. The magnitude of the impact is dependent upon the wavelength of light, but is often estimated near 550 nm. When light scattering and absorption by aerosols is approximated, the wavelength dependence of the refractive index for specific components is lost. As a result, climate models would have inherent uncertainties for aerosol contributions to radiative forcing when considering the entire solar spectrum. An aerosol extinction differential optical absorption spectrometer has been developed to directly measure aerosol extinction at mid-ultraviolet to near infrared wavelengths. The instrument consists of a spectrometer coupled to a closed White-type multi-pass gas cell with an adjustable path length of up to approximately 20 m. Laboratory measurements of various gases are compared with known absorption cross sections. Additionally, the extinction of monodisperse samples of polystyrene latex spheres are measured and compared to Mie theory generated with refractive index values from the literature to validate the new instrument. The polystyrene experiments also emphasize the ability of the new instrument to retrieve the wavelength dependent refractive index, especially in the ultraviolet wavelength regions where variability is expected. The spectrometer will be a significant advancement for determining wavelength dependent complex refractive indices in future laboratory studies as well as provide the ability to monitor ambient aerosol light extinction.

  8. Initial investigation of the wavelength dependence of optical properties measured with a new multi-pass Aerosol Extinction Differential Optical Absorption Spectrometer (AE-DOAS

    Directory of Open Access Journals (Sweden)

    R. T. Chartier

    2012-04-01

    Full Text Available Atmospheric aerosols directly affect climate by scattering and absorbing radiation. The magnitude of the impact is dependent upon the wavelength of light, but is often estimated near 550 nm. When light scattering and absorption by aerosols is approximated, the wavelength dependence of the refractive index for specific components is lost. As a result, climate models would have inherent uncertainties for aerosol contributions to radiative forcing when considering the entire solar spectrum. An aerosol extinction differential optical absorption spectrometer has been developed to directly measure aerosol extinction at mid-ultraviolet to near infrared wavelengths. The instrument consists of a spectrometer coupled to a closed White-type multi-pass gas cell with an adjustable path length of up to approximately 20 m. Laboratory measurements of various gases are compared with known absorption cross sections. Additionally, the extinction of monodisperse samples of polystyrene latex spheres are measured and compared to Mie theory generated with refractive index values from the literature to validate the new instrument. The polystyrene experiments also emphasize the ability of the new instrument to retrieve the wavelength dependent refractive index, especially in the ultraviolet wavelength regions where variability is expected. The spectrometer will be a significant advancement for determining wavelength dependent complex refractive indices in future laboratory studies as well as provide the ability to monitor ambient aerosol light extinction.

  9. Effects of {gamma} and neutron irradiation on the optical absorption of pure silica core single-mode optical fibres from Nufern

    Energy Technology Data Exchange (ETDEWEB)

    Calderon, A. [Instituto de Fisica de Cantabria, CSIC-University of Cantabria, Santander (Spain); Martinez-Rivero, C. [Instituto de Fisica de Cantabria, CSIC-University of Cantabria, Santander (Spain); Matorras, F. [Instituto de Fisica de Cantabria, CSIC-University of Cantabria, Santander (Spain); Rodrigo, T. [Instituto de Fisica de Cantabria, CSIC-University of Cantabria, Santander (Spain); Sobron, M. [Instituto de Fisica de Cantabria, CSIC-University of Cantabria, Santander (Spain); Vila, I. [Instituto de Fisica de Cantabria, CSIC-University of Cantabria, Santander (Spain); Virto, A.L. [Instituto de Fisica de Cantabria, CSIC-University of Cantabria, Santander (Spain); Alberdi, J. [CIEMAT, Particle Physics, Avda. Complutense 22, 28040, Madrid (Spain); Arce, P. [CIEMAT, Particle Physics, Avda. Complutense 22, 28040, Madrid (Spain); Barcala, J.M. [CIEMAT, Particle Physics, Avda. Complutense 22, 28040, Madrid (Spain); Calvo, E. [CIEMAT, Particle Physics, Avda. Complutense 22, 28040, Madrid (Spain); Ferrando, A. [CIEMAT, Particle Physics, Avda. Complutense 22, 28040, Madrid (Spain)]. E-mail: Antonio.Ferrando@ciemat.es; Josa, M.I. [CIEMAT, Particle Physics, Avda. Complutense 22, 28040, Madrid (Spain); Luque, J.M. [CIEMAT, Particle Physics, Avda. Complutense 22, 28040, Madrid (Spain); Molinero, A. [CIEMAT, Particle Physics, Avda. Complutense 22, 28040, Madrid (Spain); Navarrete, J. [CIEMAT, Particle Physics, Avda. Complutense 22, 28040, Madrid (Spain); Oller, J.C. [CIEMAT, Particle Physics, Avda. Complutense 22, 28040, Madrid (Spain); Valdivieso, P. [CIEMAT, Particle Physics, Avda. Complutense 22, 28040, Madrid (Spain); Yuste, C. [CIEMAT, Particle Physics, Avda. Complutense 22, 28040, Madrid (Spain); Fenyvesi, A. [Institute of Nuclear Research, ATOMKI, Debrecen (Hungary); Molnar, J. [Institute of Nuclear Research, ATOMKI, Debrecen (Hungary)

    2006-09-15

    A measurement of the optical absorption, induced by photon irradiation up to a dose of 0.9 MGy, in Nufern silica core single-mode optical fibres is presented. In addition, the fibres were irradiated with neutrons, up to a total fluence of 2x10{sup 14} cm{sup -2} and the induced optical absorption was evaluated for four different wavelengths: 630, 670, 681 and 785 nm.

  10. Localized modes in optics of photonic liquid crystals with local anisotropy of absorption

    Science.gov (United States)

    Belyakov, V. A.; Semenov, S. V.

    2016-05-01

    The localized optical modes in spiral photonic liquid crystals are theoretically studied for the certainty at the example of chiral liquid crystals (CLCs) for the case of CLC with an anisotropic local absorption. The model adopted here (absence of dielectric interfaces in the structures under investigation) makes it possible to get rid of mixing of polarizations on the surfaces of the CLC layer and of the defect structure and to reduce the corresponding equations to only the equations for light with polarization diffracting in the CLC. The dispersion equations determining connection of the edge mode (EM) and defect mode (DM) frequencies with the CLC layer parameters (anisotropy of local absorption, CLC order parameter) and other parameters of the DMS are obtained. Analytic expressions for the transmission and reflection coefficients of CLC layer and DMS for the case of CLC with an anisotropic local absorption are presented and analyzed. It is shown that the CLC layers with locally anisotropic absorption reduce the EM and DM lifetimes (and increase the lasing threshold) in the way different from the case of CLC with an isotropic local absorption. Due to the Borrmann effect revealing of which is different at the opposite stop-band edges in the case of CLC layers with an anisotropic local absorption the EM life-times for the EM frequencies at the opposite stop-bands edges may be significantly different. The options of experimental observations of the theoretically revealed phenomena are briefly discussed.

  11. Fiber-handling robot and optical connection mechanisms for automatic cross-connection of multiple optical connectors

    Science.gov (United States)

    Mizukami, Masato; Makihara, Mitsuhiro

    2013-07-01

    Conventionally, in intelligent buildings in a metropolitan area network and in small-scale facilities in the optical access network, optical connectors are joined manually using an optical connection board and a patch panel. In this manual connection approach, mistakes occur due to discrepancies between the actual physical settings of the connections and their management because these processes are independent. Moreover, manual cross-connection is time-consuming and expensive because maintenance personnel must be dispatched to remote places to correct mistakes. We have developed a fiber-handling robot and optical connection mechanisms for automatic cross-connection of multiple optical connectors, which are the key elements of automatic optical fiber cross-connect equipment. We evaluate the performance of the equipment, such as its optical characteristics and environmental specifications. We also devise new optical connection mechanisms that enable the automated optical fiber cross-connect module to handle and connect angled physical contact (APC) optical connector plugs. We evaluate the performance of the equipment, such as its optical characteristics. The evaluation results confirm that the automated optical fiber cross-connect equipment can connect APC connectors with low loss and high return loss, indicating that the automated optical fiber cross-connect equipment is suitable for practical use in intelligent buildings and optical access networks.

  12. Quantification and parametrization of non-linearity effects by higher-order sensitivity terms in scattered light differential optical absorption spectroscopy

    Science.gov (United States)

    Puķīte, Jānis; Wagner, Thomas

    2016-05-01

    We address the application of differential optical absorption spectroscopy (DOAS) of scattered light observations in the presence of strong absorbers (in particular ozone), for which the absorption optical depth is a non-linear function of the trace gas concentration. This is the case because Beer-Lambert law generally does not hold for scattered light measurements due to many light paths contributing to the measurement. While in many cases linear approximation can be made, for scenarios with strong absorptions non-linear effects cannot always be neglected. This is especially the case for observation geometries, for which the light contributing to the measurement is crossing the atmosphere under spatially well-separated paths differing strongly in length and location, like in limb geometry. In these cases, often full retrieval algorithms are applied to address the non-linearities, requiring iterative forward modelling of absorption spectra involving time-consuming wavelength-by-wavelength radiative transfer modelling. In this study, we propose to describe the non-linear effects by additional sensitivity parameters that can be used e.g. to build up a lookup table. Together with widely used box air mass factors (effective light paths) describing the linear response to the increase in the trace gas amount, the higher-order sensitivity parameters eliminate the need for repeating the radiative transfer modelling when modifying the absorption scenario even in the presence of a strong absorption background. While the higher-order absorption structures can be described as separate fit parameters in the spectral analysis (so-called DOAS fit), in practice their quantitative evaluation requires good measurement quality (typically better than that available from current measurements). Therefore, we introduce an iterative retrieval algorithm correcting for the higher-order absorption structures not yet considered in the DOAS fit as well as the absorption dependence on

  13. Improved Neutron Capture Cross Section Measurements with the n_TOF Total Absorption Calorimeter

    CERN Document Server

    Mendoza, E; Perkowski, J; Andriamonje, S; Carrapico, C; Moinul, M; Vannini, G; Quesada, J M; Harrisopulos, S; Milazzo, P M; Berthier, B; Lozano, M; Krticka, M; Domingo-Pardo, C; Nolte, R; Chiaveri, E; Saarmento, H; Jericha, E; Ferrari, A; Massimi, C; Giubrone, G; Avrigeanu, V; Martinez, T; Guerrero, C; Andrzejewski, J; Karadimos, D; Mengoni, A; Ganesan, S; Vlachoudis, V; Becares, V; Cortes, G; Variale, V; Losito, H; Calvino, F; Kappeler, F; Gunsing, F; Gramegna, F; Colonna, N; Marrone, S; Pavlik, A; Berthoumieux, E; Paradela, C; Mastinu, P F; Vaz, P; Tassan-Got, L; Kadi, Y; Tarrio, D; Cano-Ott, D; Brugger, M; Wallner, A; Audouin, L; Fernandez-Ordonez, M; Becvar, F; Goncalves, I F; Cerutti, F; Ventura, A; Mosconi, M; Tagliente, G; Duran, I; Casado, A; Ioannides, K; Weiss, C; Mirea, M; Gomez-Hornillos, M B; Vlastou, R; Calviani, M; Lederer, C; Gonzalez-Romero, E; Marganiec, J; Vidriales, J J; Lebbos, E; Leeb, H; Heil, M; Dillmann, I; Tain, J L; Belloni, F

    2011-01-01

    The n\\_TOF collaboration operates a Total Absorption Calorimeter (TAC) {[}1] for measuring neutron capture cross-sections of low-mass and/or radioactive samples. The results obtained with the TAC have led to a substantial improvement of the capture cross sections of (237)Np and (240)Pu {[}2]. The experience acquired during the first measurements has allowed us to optimize the performance of the TAC and to improve the capture signal to background ratio, thus opening the way to more complex and demanding measurements on rare radioactive materials. The new design has been reached by a series of detailed Monte Carlo simulations of complete experiments and dedicated test measurements. The new capture setup will be presented and the main achievements highlighted.

  14. Absorption cross section determination of biogenic C5-aldehydes in the actinic region

    Science.gov (United States)

    Lanza, Beatriz; Jiménez, Elena; Ballesteros, Bernabé; Albaladejo, José

    2008-03-01

    UV absorption cross sections ( σλ) for 3-methylbutanal, trans-2-methyl-2-butenal, and 3-methyl-2-butenal have been determined between 255 and 390 nm and as a function of temperature (273-305 K). A D 2 lamp and a 0.5 m spectrograph coupled to a charged-couple device were employed in these measurements. σλ values were found to be independent of temperature in the range studied. The cross section data reported in this Letter were used to provide estimates of the photolysis rate coefficients ( Ji) for these compounds as a function of altitude in the troposphere. Photolysis and OH reaction both appear to be important in determining the atmospheric fate of these compounds.

  15. Cross-interference correction and simultaneous multi-gas analysis based on infrared absorption

    Institute of Scientific and Technical Information of China (English)

    Sun You-Wen; Zeng Yi; Liu Wen-Qing; Xie Pin-Hua; Chan Ka-Lok; Li Xian-Xin; Wang Shi-Mei; Huang Shu-Hua

    2012-01-01

    In this paper,we present simultaneous multiple pollutant gases (CO2,CO,and NO) measurements by using the non-dispersive infrared (NDIR) technique.A cross-correlation correction method is proposed and used to correct the cross-interferences among the target gases.The calculation of calibration curves is based on least-square fittings with third-order polynomials,and the interference functions are approximated by linear curves.The pure absorbance of each gas is obtained by solving three simultaneous equations using the fitted interference functions.Through the interference correction,the signal created at each filter channel only depends on the absorption of the intended gas.Gas mixture samples with different concentrations of CO2,CO,and NO are pumped into the sample cell for analysis.The results show that the measurement error of each gas is less than 4.5%.

  16. Impurity-related linear and nonlinear optical response in quantum-well wires with triangular cross section

    Energy Technology Data Exchange (ETDEWEB)

    Duque, C.A., E-mail: cduque@fisica.udea.edu.co [Instituto de Física, Universidad de Antioquia, AA 1226, Medellín (Colombia); Mora-Ramos, M.E. [Instituto de Física, Universidad de Antioquia, AA 1226, Medellín (Colombia); Facultad de Ciencias, Universidad Autónoma del Estado de Morelos, Ave. Universidad 1001, CP 62209, Cuernavaca, Morelos, México (Mexico); Kasapoglu, E.; Ungan, F.; Yesilgul, U. [Cumhuriyet University, Physics Department, 58140 Sivas (Turkey); Sakiroglu, S. [Dokuz Eylül University, Physics Department, 35160 Buca, İzmir (Turkey); Sari, H. [Cumhuriyet University, Physics Department, 58140 Sivas (Turkey); Sökmen, I. [Dokuz Eylül University, Physics Department, 35160 Buca, İzmir (Turkey)

    2013-11-15

    The 1s-like and 2p-like donor impurity energy states are studied in a semiconductor quantum wire of equilateral triangular cross section as functions of the impurity position and the geometrical size of the structure. Linear and nonlinear coefficients for the optical absorption and relative refractive index change associated with 1s→2p transitions are calculated for both the x-polarization and y-polarization of the incident light. The results show a mixed effect of redshift and blueshift depending on the location of the donor atom. Also, strong nonlinear contributions to the optical absorption coefficient are obtained for both polarizations in the on-center impurity case. -- Highlights: • The 1s- and 2p-like impurity states in triangular quantum-well wires. • Optical absorption and relative refractive index changes are calculated. • Redshift and blueshift in the optical structures depend on the donor position. • Strong nonlinear contributions to the absorption coefficient have been obtained.

  17. Exciton optical absorption coefficients and refractive index changes in a strained InAs/GaAs quantum wire: The effect of the magnetic field

    Energy Technology Data Exchange (ETDEWEB)

    Arunachalam, N. [Department of Physics, Government Higher Secondary School, Saruguvalayapatti, Melur 625109, Madurai (India); John Peter, A., E-mail: a.john.peter@gmail.com [Center for Environmental Studies/Green Energy Center, Department of Environmental Science and Engineering, College of Engineering, Kyung Hee University, Seocheon-dong 1, Giheung-gu, Yongin-Si, Gyeonggi-Do 446-701 (Korea, Republic of); Yoo, Chang Kyoo [Center for Environmental Studies/Green Energy Center, Department of Environmental Science and Engineering, College of Engineering, Kyung Hee University, Seocheon-dong 1, Giheung-gu, Yongin-Si, Gyeonggi-Do 446-701 (Korea, Republic of)

    2012-06-15

    Magnetic field induced exciton binding energy is investigated in a strained InAs/GaAs quantum wire within the framework of single band effective mass approximation. The strain contribution to the potential is determined through deformation potentials. The interband emission energy of strained InAs/GaAs wire is investigated in the influence of magnetic field with the various structural parameters. Magnetic field induced photoionization cross section of the exciton is studied. The total optical absorption and the refractive index changes as a function of normalized photon energy between the ground and the first excited state in the presence of magnetic field are analyzed. The optical absorption coefficients and the refractive index changes strongly depend on the incident optical intensity and the magnetic field. The occurred blueshift of the resonant peak due to the magnetic field will give the information about the variation of two energy levels in the quantum well wire. The optical absorption coefficients and the refractive index changes are strongly dependent on the incident optical intensity and the magnetic field. - Highlights: Black-Right-Pointing-Pointer Magnetic field induced exciton binding energy is investigated in a strained InAs/GaAs quantum wire. Black-Right-Pointing-Pointer The strain contribution to the potential is determined through deformation potentials. Black-Right-Pointing-Pointer The interband emission energy of strained InAs/GaAs wire is investigated with the various structural parameters. Black-Right-Pointing-Pointer Magnetic field induced photoionization cross section of the exciton is studied. Black-Right-Pointing-Pointer The optical properties strongly depend on the incident optical intensity and the magnetic field.

  18. Management of light absorption in extraordinary optical transmission based ultra-thin-film tandem solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Mashooq, Kishwar; Talukder, Muhammad Anisuzzaman, E-mail: anis@eee.buet.ac.bd [Department of Electrical and Electronic Engineering, Bangladesh University of Engineering and Technology, Dhaka 1205 (Bangladesh)

    2016-05-21

    Although ultra-thin-film solar cells can be attractive in reducing the cost, they suffer from low absorption as the thickness of the active layer is usually much smaller than the wavelength of incident light. Different nano-photonic techniques, including plasmonic structures, are being explored to increase the light absorption in ultra-thin-film solar cells. More than one layer of active materials with different energy bandgaps can be used in tandem to increase the light absorption as well. However, due to different amount of light absorption in different active layers, photo-generated currents in different active layers will not be the same. The current mismatch between the tandem layers makes them ineffective in increasing the efficiency. In this work, we investigate the light absorption properties of tandem solar cells with two ultra-thin active layers working as two subcells and a metal layer with periodically perforated holes in-between the two subcells. While the metal layer helps to overcome the current mismatch, the periodic holes increase the absorption of incident light by helping extraordinary optical transmission of the incident light from the top to the bottom subcell, and by coupling the incident light to plasmonic and photonic modes within ultra-thin active layers. We extensively study the effects of the geometry of holes in the intermediate metal layer on the light absorption properties of tandem solar cells with ultra-thin active layers. We also study how different metals in the intermediate layer affect the light absorption; how the geometry of holes in the intermediate layer affects the absorption when the active layer materials are changed; and how the intermediate metal layer affects the collection of photo-generated electron-hole pairs at the terminals. We find that in a solar cell with 6,6-phenyl C61-butyric acid methyl ester top subcell and copper indium gallium selenide bottom subcell, if the periodic holes in the metal layer are square or

  19. Management of light absorption in extraordinary optical transmission based ultra-thin-film tandem solar cells

    Science.gov (United States)

    Mashooq, Kishwar; Talukder, Muhammad Anisuzzaman

    2016-05-01

    Although ultra-thin-film solar cells can be attractive in reducing the cost, they suffer from low absorption as the thickness of the active layer is usually much smaller than the wavelength of incident light. Different nano-photonic techniques, including plasmonic structures, are being explored to increase the light absorption in ultra-thin-film solar cells. More than one layer of active materials with different energy bandgaps can be used in tandem to increase the light absorption as well. However, due to different amount of light absorption in different active layers, photo-generated currents in different active layers will not be the same. The current mismatch between the tandem layers makes them ineffective in increasing the efficiency. In this work, we investigate the light absorption properties of tandem solar cells with two ultra-thin active layers working as two subcells and a metal layer with periodically perforated holes in-between the two subcells. While the metal layer helps to overcome the current mismatch, the periodic holes increase the absorption of incident light by helping extraordinary optical transmission of the incident light from the top to the bottom subcell, and by coupling the incident light to plasmonic and photonic modes within ultra-thin active layers. We extensively study the effects of the geometry of holes in the intermediate metal layer on the light absorption properties of tandem solar cells with ultra-thin active layers. We also study how different metals in the intermediate layer affect the light absorption; how the geometry of holes in the intermediate layer affects the absorption when the active layer materials are changed; and how the intermediate metal layer affects the collection of photo-generated electron-hole pairs at the terminals. We find that in a solar cell with 6,6-phenyl C61-butyric acid methyl ester top subcell and copper indium gallium selenide bottom subcell, if the periodic holes in the metal layer are square or

  20. Complete optical absorption of ultrashort pulses by plasmons in nanostructured graphene (Conference Presentation)

    Science.gov (United States)

    Martínez Saavedra, José Ramón; Cerullo, Giulio; Pruneri, Valerio; Wall, Simon; García de Abajo, Javier

    2016-10-01

    The peculiar electronic structure of graphene results in a large optoelectronic response that holds great potential for technology. For example, this material exhibits a nearly constant absorption 2.3% over a broad spectral range [1], which can be electrically modulated in the mid-IR by injecting attainable densities of charge carriers. When doped, graphene can sustain plasmons that radically modify its optical response, enabling complete optical absorption for suitably designed patterns [2]. Graphene nanoribbons constitute one of the simplest geometrical patterns that one can produce. They have been extensively studied and their plasmons accurately explained with simple models [3]. When heated to a large electronic temperature, graphene behaves nearly as if is was highly doped, also giving rise to plasmon modes [4]. In this work, we study the possibility of using ultrashort light pulses together with the natural electronic relaxation mechanisms in graphene nanoribbons as a way to tune their optical response. We first discuss the optically induced plasmons of individual nanoribbons when illuminated with ultrashort pulses and then analyze the evolution of the plasmon frequency as a function of the delay between pump and probe. We study the redshift of these plasmons with increasing delay due to electron relaxation. We also investigate the optical response of the ribbon exposed to a train of optical pulses. We further discuss ribbon arrays illuminated from the substrate under total internal reflection conditions, for which we predict complete absorption for a suitable choice of geometrical and illumination parameters. References [1] F. H. L. Koppens, D. E. Chang, and F. J. García de Abajo, Nano Letters 11, 3370-3377 (2011) [2] S. Thongrattanasiri, F. H. L. Koppens, and F. J. García de Abajo, Phys. Rev. Lett. 108, 047401 (2012) [3] I. Silveiro, J. M. Plaza Ortega, and F. J. García de Abajo, Light: Science and Applications 4, e241 (2015) [4] F. J. García de Abajo

  1. Optical absorption properties of electron bubbles and experiments on monitoring individual electron bubbles in liquid helium

    Science.gov (United States)

    Guo, Wei

    When a free electron is injected into liquid helium, it forms a microscopic bubble essentially free of helium atoms, which is referred to as an electron bubble. It represents a fine example of a quantum-mechanical particle confined in a potential well. In this dissertation, we describe our studies on bubble properties, especially the optical absorption properties of ground state electron bubbles and experiments on imaging individual electron bubbles in liquid helium. We studied the effect of zero-point and thermal fluctuations on the shape of ground state electron bubbles in liquid helium. The results are used to determine the line shape for the 1S to 1P optical transition. The calculated line shape is in very good agreement with the experimental measurements of Grimes and Adams. For 1S to 2P transition, the obtained transition line width agrees well with the measured data of Zipfel over a range of pressure up to 15 bars. Fluctuations in the bubble shape also make other "unallowed" transitions possible. The transition cross-sections from the 1S state to the 1D and 2D states are calculated with magnitude approximately two orders smaller than that of the 1S to 1P and 2P transitions. In our electron bubble imaging experiments, a planar ultrasonic transducer was used to generate strong sound wave pulse in liquid helium. The sound pulse passed through the liquid so as to produce a transient negative pressure over a large volume (˜ 1 cm3). An electron bubble that was passed by the sound pulse exploded for a fraction of a microsecond and grew to have a radius of around 10 microns. While the bubble had this large size it was illuminated with a flash lamp and its position was recorded. In this way, we can determine its position. Through the application of a series of sound pulses, we can then take images along the track of individual electrons. The motion of individual electron bubbles has been successfully monitored. Interesting bubble tracks that may relate to electrons

  2. Absorption and scattering cross-section extinction values of silver nanoparticles

    Science.gov (United States)

    Hlaing, May; Gebear-Eigzabher, Bellsabel; Roa, Azael; Marcano, Aristides; Radu, Daniela; Lai, Cheng-Yu

    2016-08-01

    We determine the extinction values of silver nanoparticles as a function of their diameter for three different wavelengths (405 nm, 532 nm, and 671 nm) from the values of absorbance and their photothermal lens response. We show that for particles of small diameters (extinction grows as the cube of the diameter for all three wavelengths. For larger particles the extinction determined from absorbance exhibits a sixth order dependence on the diameters for 532 nm and 671 nm. This kind of behavior is typical of scattering processes that should dominate for large particles. For 405 nm the plasmonic resonant absorption dominates over scattering making difficult the observation of the sixth order dependence even for particles larger than 50 nm. The absorption cross-section measured by the photothermal method does not show the sixth order dependence. It depends on the cube of the particle's diameter for all nanoparticles confirming the scattering free character of this absorption technique and validating the results of the absorbance experiment.

  3. Absorption cross section of building materials at mm wavelength in a reverberation chamber

    Science.gov (United States)

    Micheli, D.; Delfini, A.; Pastore, R.; Marchetti, M.; Diana, R.; Gradoni, G.

    2017-02-01

    The reverberation chamber (RC) method is used to estimate the average absorption cross section of building materials at mm wave frequencies. Analysed samples include concrete, travertine and bricks of different types. The investigation is carried out in the frequency range between 50 GHz and 68 GHz, which is of interest in the next generation of mobile telecommunication system. A cylindrical cavity is transformed into a RC through the use of a mechanical model stirrer. The chamber field is statistically homogeneous and depolarized; therefore it can be used to probe the average response of the sample under test. In particular, through a differential measure of the average quality factor (average insertion loss) it is possible estimate the fraction of power absorbed by the sample under test. Several cube-shape samples have been characterized and compared. Obtained results show that analysed samples have remarkably different levels of the electromagnetic wave absorption, depending on both material density and chemical composition. The absorption of pure water is used as a baseline to determine the dynamic range of the measurement.

  4. Optical absorption properties of Ag/SiO sub 2 composite films induced by gamma irradiation

    CERN Document Server

    Pan, A L; Yang, Z P; Liu, F X; Ding, Z J; Qian, Y T

    2003-01-01

    Mesoporous SiO sub 2 composite films with small Ag particles or clusters dispersed in them were prepared by a new method: first the matrix SiO sub 2 films were prepared by the sol-gel process combined with the dip-coating technique; then they were soaked in AgNO sub 3 solutions; this was followed by irradiation with gamma-rays at room temperature and ambient pressure. The structure of these films was examined by high-resolution transmission electron microscopy, and their optical absorption spectra were examined. It has been shown that the Ag particles grown within the porous SiO sub 2 films are very small and are highly dispersed. On increasing the soaking concentration and subjecting the samples to an additional annealing, a different peak-shift effect for the surface plasmon resonance was observed in the optical absorption measurement. Possible mechanisms of this behaviour are discussed in this paper.

  5. Coherent control of the optical absorption in a plasmonic lattice coupled to a luminescent layer

    CERN Document Server

    Pirruccio, Giuseppe; Rodriguez, Said Rahimzadeh-Kalaleh; Rivas, Jaime Gomez

    2016-01-01

    We experimentally demonstrate the coherent control, i.e., phase-dependent enhancement and suppression, of the optical absorption in an array of metallic nanoantennas covered by a thin lu- minescent layer. The coherent control is achieved by using two collinear, counter-propagating and phase-controlled incident waves with wavelength matching the absorption spectrum of dye molecules coupled to the array. Symmetry arguments shed light on the relation between the relative phase of the incident waves and the excitation efficiency of the optical resonances of the system. This coherent control is associated with a phase-dependent distribution of the electromagnetic near-fields in the structure which enables a significant reduction of the unwanted dissipation in the metallic structures.

  6. Optical Absorption Spectra and Intraband Dynamics in Terahertz-Driven Semiconductor Superlattice

    Institute of Scientific and Technical Information of China (English)

    MI Xian-Wu

    2004-01-01

    @@ We have theoretically investigated the optical absorption spectrum and intraband dynamics by subjecting a superlattice to both a terahertz (THz)-frequency driving field and an optical pulse by using an excitonic basis.In the presence of a THz dc field, the satellite structures in the absorption spectra are presented. The satellite structure is a result from the THz nonlinear dynamics of Wannier-Stark ladder excitons. On the other hand, the coherent intraband polarization is investigated. We find that the excitonic Bloch oscillation is driven by the THz field and yields an intraband polarization that continues to oscillate at times much longer than the intraband dephasing time. The temporal evolution of the slowly varying components of the intraband polarization is dependent on the THz frequency.

  7. Short optical pulse generation at 40 GHz with a bulk electro-absorption modulator packaged device

    Science.gov (United States)

    Langlois, Patrick; Moore, Ronald; Prosyk, Kelvin; O'Keefe, Sean; Oosterom, Jill A.; Betty, Ian; Foster, Robert; Greenspan, Jonathan; Singh, Priti

    2003-12-01

    Short optical pulse generation at 40GHz and 1540nm wavelength is achieved using fully packaged bulk quaternary electro-absorption modulator modules. Experimental results obtained with broadband and narrowband optimized packaged modules are presented and compared against empirical model predictions. Pulse duty cycle, extinction ratio and chirp are studied as a function of sinusoidal drive voltage and detuning between operating wavelength and modulator absorption band edge. Design rules and performance trade-offs are discussed. Low-chirp pulses with a FWHM of ~12ps and sub-4ps at a rate of 40GHz are demonstrated. Optical time-domain demultiplexing of a 40GHz to a 10GHz pulse train is also demonstrated with better than 20dB extinction ratio.

  8. First principles electron-correlated calculations of optical absorption in magnesium clusters

    CERN Document Server

    Shinde, Ravindra

    2015-01-01

    In this paper we report the calculations of linear optical absorption spectra of various isomers of magnesium clusters Mg$_{n}$ (n=2--5) involving valence transitions, performed using the large-scale all-electron configuration interaction (CI) methodology. First, geometries of several low-lying isomers of each cluster were optimized at the coupled-cluster singles doubles (CCSD) level of theory. These geometries were subsequently employed to perform ground and excited state calculations on these systems using the multi-reference singles-doubles configuration-interaction (MRSDCI) approach, which includes electron correlation effects at a sophisticated level. Resultant CI wave functions were used to compute the optical absorption spectra within the electric-dipole approximation. Our results on magnesium dimer (Mg$_{2}$) isomer are in excellent agreement with the experiments as far as oscillator strengths, and excitation energies are concerned. Owing to a better description of electron-correlation effects, these ...

  9. A new optical absorption peak for Au/SiO sub 2 nanocomposite formed by sonochemistry

    CERN Document Server

    Fu Gan Hua; Gan Yan Jie; Hu Jing Lian

    2003-01-01

    An Au nanoparticle/monolithic mesoporous silica assembly was synthesized by means of ultrasonic irradiation. For this as-prepared Au/silica sample, exposure to ambient air (or ageing) at room temperature (10 deg. C) and subsequent drying at 120 deg. C induce a new optical absorption at 460 nm in addition to the normal surface plasmon resonance (SPR) of Au nanoparticles. Further drying results in diminishing and even disappearance of this new peak accompanied by enhancement of the normal SPR. Further experiments revealed that the exposure to ambient air for sufficient time at room temperature after irradiation plays a crucial role in the appearance of the new peak after subsequent drying at 120 deg. C. This new optical absorption peak may be associated with Au clusters with size less than 1 nm. (letter to the editor)

  10. Absorption cross-sections of ozone in the ultraviolet and visible spectral regions: Status report 2015

    Science.gov (United States)

    Orphal, Johannes; Staehelin, Johannes; Tamminen, Johanna; Braathen, Geir; De Backer, Marie-Renée; Bais, Alkiviadis; Balis, Dimitris; Barbe, Alain; Bhartia, Pawan K.; Birk, Manfred; Burkholder, James B.; Chance, Kelly; von Clarmann, Thomas; Cox, Anthony; Degenstein, Doug; Evans, Robert; Flaud, Jean-Marie; Flittner, David; Godin-Beekmann, Sophie; Gorshelev, Viktor; Gratien, Aline; Hare, Edward; Janssen, Christof; Kyrölä, Erkki; McElroy, Thomas; McPeters, Richard; Pastel, Maud; Petersen, Michael; Petropavlovskikh, Irina; Picquet-Varrault, Benedicte; Pitts, Michael; Labow, Gordon; Rotger-Languereau, Maud; Leblanc, Thierry; Lerot, Christophe; Liu, Xiong; Moussay, Philippe; Redondas, Alberto; Van Roozendael, Michel; Sander, Stanley P.; Schneider, Matthias; Serdyuchenko, Anna; Veefkind, Pepijn; Viallon, Joële; Viatte, Camille; Wagner, Georg; Weber, Mark; Wielgosz, Robert I.; Zehner, Claus

    2016-09-01

    The activity "Absorption Cross-Sections of Ozone" (ACSO) started in 2008 as a joint initiative of the International Ozone Commission (IO3C), the World Meteorological Organization (WMO) and the IGACO ("Integrated Global Atmospheric Chemistry Observations") O3/UV subgroup to study, evaluate, and recommend the most suitable ozone absorption cross-section laboratory data to be used in atmospheric ozone measurements. The evaluation was basically restricted to ozone absorption cross-sections in the UV range with particular focus on the Huggins band. Up until now, the data of Bass and Paur published in 1985 (BP, 1985) are still officially recommended for such measurements. During the last decade it became obvious that BP (1985) cross-section data have deficits for use in advanced space-borne ozone measurements. At the same time, it was recognized that the origin of systematic differences in ground-based measurements of ozone required further investigation, in particular whether the BP (1985) cross-section data might contribute to these differences. In ACSO, different sets of laboratory ozone absorption cross-section data (including their dependence on temperature) of the group of Reims (France) (Brion et al., 1993, 1998, 1992, 1995, abbreviated as BDM, 1995) and those of Serdyuchenko et al. (2014), and Gorshelev et al. (2014), (abbreviated as SER, 2014) were examined for use in atmospheric ozone measurements in the Huggins band. In conclusion, ACSO recommends: The spectroscopic data of BP (1985) should no longer be used for retrieval of atmospheric ozone measurements. For retrieval of ground-based instruments of total ozone and ozone profile measurements by the Umkehr method performed by Brewer and Dobson instruments data of SER (2014) are recommended to be used. When SER (2014) is used, the difference between total ozone measurements of Brewer and Dobson instruments are very small and the difference between Dobson measurements at AD and CD wavelength pairs are diminished

  11. Optical absorption enhancement in slanted silicon nanocone hole arrays for solar photovoltaics

    Science.gov (United States)

    Zhang, Shu-Yuan; Liu, Wen; Li, Zhao-Feng; Liu, Min; Liu, Yu-Sheng; Wang, Xiao-Dong; Yang, Fu-Hua

    2016-10-01

    We investigate slanted silicon nanocone hole arrays as light absorbing structures for solar photovoltaics via simulation. With only 1-μm equivalent thickness, a maximum short-circuit current density of 34.9 mA/cm2 is obtained. Moreover, by adding an Ag mirror under the whole structure, a short-circuit current density of 37.9 mA/cm2 is attained. It is understood that the optical absorption enhancement mainly results from three aspects. First, the silicon nanocone holes provide a highly efficient antireflection effect. Second, after breaking the geometric symmetry, the slanted silicon nanocone hole supports more resonant absorption modes than vertical structures. Third, the Fabry-Perot resonance enhances the light absorption after adding an Ag mirror. Project supported by the National Natural Science Foundation of China (Grant Nos. 61274066, 61474115, and 61504138) and the National High Technology Research and Development Program of China (Grant No. 2014AA032602).

  12. Solar absorptance degradation of optical solar reflector radiators on the Spacenet satellites

    Science.gov (United States)

    Naegeli, Charles R.

    1992-01-01

    Telemetry data are presented for two communications hybrid satellites, Spacenet I and Spacenet II, collected to determine the long-term temperature trend and associated solar absorptance degradation of the optical solar reflectors (OSRs). A thermal model was used to calculate the thermal sensitivity of various OSR components to changes in the solar absorptance and to determine absolute values of solar absorptance. The separation of the data into sunlit and nonsunlit periods made it possible to confirm the hypothesis that degradation occurs under the catalytic activity of direct sunlight on the spacecraft contaminants. The differences found between the degradation rates for Spacenet-I and Spacenet-II satellites and between the present results and published reports on other satellites are considered to be related to variations in the volume of spacecraft contaminants.

  13. Optical Absorption and Electric Resistivity of an l-Cysteine Film

    Science.gov (United States)

    Kamada, Masao; Hideshima, Takuya; Azuma, Junpei; Yamamoto, Isamu; Imamura, Masaki; Takahashi, Kazutoshi

    2016-12-01

    The optical and electric properties of an l-cysteine film have been investigated to understand its applicability to bioelectronics. The fundamental absorption is the allowed transition having the threshold at 5.8 eV and the absorption is due to the charge-transfer type transition from sulfur-3sp to oxygen-2p and/or carbon-2p states, while absorptions more than 9 eV can be explained with intra-atomic transitions in the functional groups. The electric resistivity is 2.0 × 104 Ω m at room temperature and increases as the sample temperature decreases. The results indicate that the l-cysteine film is a p-type semiconductor showing the hole conduction caused by the sulfur-3sp occupied states and unknown impurity or defect states as acceptors. The electron affinity of the l-cysteine film is derived as ≦-0.3 eV.

  14. Effective optical path length for tandem diffuse cubic cavities as gas absorption cell

    Science.gov (United States)

    Yu, J.; Gao, Q.; Zhang, Y. G.; Zhang, Z. G.; Wu, S. H.

    2014-12-01

    Tandem diffuse cubic cavities designed by connecting two single diffuse cubic-shaped cavities, A and B, with an aperture (port fraction fap) in the middle of the connecting baffle was developed as a gas absorption cell. The effective optical path length (EOPL) was evaluated by comparing the oxygen absorption signal in the cavity and in air based on tunable diode laser absorption spectroscopy (TDLAS). Experimental results manifested an enhancement of EOPL for the tandem diffuse cubic cavities as the decrease of fap and can be expressed as the sum of EOPL of two single cubic cavities at fap 0.01, which indicated that back scattering light from cavity B to cavity A cannot be ignored at this condition.

  15. Investigation of Third Order Optical Nonlinearity and Reverse Saturable Absorption of Octa-alkoxy Metallophthalocyanines

    Science.gov (United States)

    Sanghadasa, Mohan; Shin, In-Seek; Barr, Thomas A.; Clark, Ronald D.; Guo, Huai-Song; Martinez, Angela; Penn, Benjamin G.

    1998-01-01

    In recent years, there has been a growing interest in the development of passive optical power limiters for the protection of the human eye and solid-state sensors from damage caused by energetic light pulses and also for other switching applications. One of the key issues involved is the search for appropriate materials that show effective reverse saturable absorption. Phthalocyanines seem to be good candidates for such applications because of their higher third order nonlinearity and the unique electronic absorption characteristics. A series of 1,4,8,11,15, 18,22,25-octa-alkoxy metallophthalocyanines containing various central metal atoms such as zinc, copper, palladium, cobalt and nickel were characterized for their third order nonlinearity and for their nonlinear absorptive properties to evaluate their suitability to function as reverse saturable absorbers.

  16. Optical absorption and emission characterization of P3HT: graphene composite for its prospective photovoltaic application

    Energy Technology Data Exchange (ETDEWEB)

    Singh, Joginder, E-mail: jsdevgan.singh@gmail.com; Prasad, Neetu; Nirwal, Varun Singh; Gautam, Khyati; Peta, Koteswara Rao; Bhatnagar, P. K. [Department of Electronic Science, University of Delhi South Campus, Benito Juarez Road, New Delhi, India-110021 (India)

    2016-05-23

    In the present work, regioregular P3HT (Poly (3-hexylthiophene-2, 5-diyl) was blended with graphene nanopowder and the optical spectroscopic characterization of the composite has been performed. It was observed that at low concentration of graphene (up to 0.1 wt %) there is no significant variation in absorption intensity or wavelength range. But at higher concentration (> 0.1 wt %) the absorption intensity starts reducing. Whereas, the photoluminescence of the composite solution quenches as we increase the concentration of graphene. It reveals that charge recombination decreases with increase in concentration (0.05 to 0.5 wt %) of graphene. Therefore 0.1 wt % seems to be the optimized concentration of graphene in the composite for which appropriate quenching of PL was observed without any significant reduction in absorption of photons. Thus maximum efficiency in P3HT: graphene composite photovoltaic cell is expected for 0.1 wt % of graphene concentration in our typical case.

  17. Optical absorption of small copper clusters in neon: Cu(n), (n = 1-9).

    Science.gov (United States)

    Lecoultre, S; Rydlo, A; Félix, C; Buttet, J; Gilb, S; Harbich, W

    2011-02-21

    We present optical absorption spectra in the UV-visible range (1.6 eV neon matrix at 7 K. The atom and the dimer have already been measured in neon matrices, while the absorption spectra for sizes between Cu(3) and Cu(9) are entirely (n = 6-9) or in great part new. They show a higher complexity and a larger number of transitions distributed over the whole energy range compared to similar sizes of silver clusters. The experimental spectra are compared to the time dependent density functional theory (TD-DFT) implemented in the TURBOMOLE package. The analysis indicates that for energies larger than 3 eV the transitions are mainly issued from d-type states; however, the TD-DFT scheme does not reproduce well the detailed structure of the absorption spectra. Below 3 eV the agreement for transitions issued from s-type states is better.

  18. Self-absorption influence on the optical spectroscopy of zinc oxide laser produced plasma

    Energy Technology Data Exchange (ETDEWEB)

    De Posada, E; Arronte, M A; Ponce, L; Rodriguez, E; Flores, T [Centro de Investigacion en Ciencia Aplicada y TecnologIa Avanzada-Unidad Altamira, Tamaulipas (Mexico); Lunney, J G, E-mail: edeposada@ipn.mx [School of Physics, Trinity College Dublin (Ireland)

    2011-01-01

    Optical spectroscopy is used to study the laser ablation process of ZnO targets. It is demonstrated that even if Partial Local Thermal Equilibrium is present, self absorption process leads to a decrease of recorded lines emission intensities and have to be taken into account to obtain correct values of such parameters. It is presented a method that combines results of both Langmuir probe technique and Anisimov model to obtain correct values of plasma parameters.

  19. Towards quantitative tissue absorption imaging by combining photoacoustics and acousto-optics

    CERN Document Server

    Daoudi, Khalid

    2012-01-01

    We propose a strategy for quantitative photoacoustic mapping of chromophore concentrations that can be performed purely experimentally. We exploit the possibility of acousto-optic modulation using focused ultrasound, and the principle that photons follow trajectories through a turbid medium in two directions with equal probability. A theory is presented that expresses the local absorption coefficient inside a medium in terms of noninvasively measured quantities and experimental parameters. Proof of the validity of the theory is given with Monte Carlo simulations.

  20. Characterizing trace metal impurities in optical waveguide materials using x-ray absorption

    Energy Technology Data Exchange (ETDEWEB)

    Citrin, P.H.; Northrup, P.A.; Atkins, R.M.; Niu, L.; Marcus, M.A.; Jacobson, D.C. [Lucent Technologies, Murray Hill, NJ (United States). Bell Labs.; Glodis, P.F. [Lucent Technologies, Norcross, GA (United States). Bell Labs.

    1998-12-31

    X-ray absorption measurements are described for identifying metal impurities in silica preforms, the rod-like starting materials from which hair-like optical fibers are drawn. The results demonstrate the effectiveness of this approach as a non-destructive, quantitative, element-selective, position-sensitive, and chemical-state-specific means for characterizing transition metals in the concentration regime of parts per billion.

  1. Optical absorption and fluorescence properties of $Er^{3+}$ in sodium borate glass

    OpenAIRE

    Ratnakaram, YC; J.Lakshmi; Chakradhar, RPS

    2005-01-01

    Spectroscopic properties of $Er^{3+}$ ions in sodium borate glass have been studied. The indirect and direct optical band gaps $(E_{opt})$ and energy level parameters (Racah $(E^{1}, E^{2} and E^{3})$, spin-orbit $(\\xi_{4f})$ and configurational interaction (\\alpha)) are evaluated. Spectral intensities for various absorption bands of $Er^{3+}$ doped sodium borate glass are calculated. Using Judd-Ofelt intensity parameters $(\\Omega_{2},\\Omega_{4}, \\Omega_{6})$, radiative transition probabiliti...

  2. INVERSE COMPUTATION OF OPTICAL-ABSORPTION COEFFICIENT IN INHOMOGENEOUS MATERIAL WITH VARIED THERMAL CONDUCTIVITY

    Institute of Scientific and Technical Information of China (English)

    ZhuJianxin

    2002-01-01

    In this paper,for an inhomogeneous material in which the thermal conductivity varies as a function of depth,an efficient treatment is proposed to inversely calculate the depth distribution of optical-absorption coefficient by the surface temperature of the material. It is demonstrated that the results of inverse computation by that method are more similar to the experimental ones measured by some destructive method. Thus ,the treatment is more feasible to nondestructively estimate the distribution.

  3. Tunable Diode Laser Atomic Absorption Spectroscopy for Detection of Potassium under Optically Thick Conditions.

    Science.gov (United States)

    Qu, Zhechao; Steinvall, Erik; Ghorbani, Ramin; Schmidt, Florian M

    2016-04-05

    Potassium (K) is an important element related to ash and fine-particle formation in biomass combustion processes. In situ measurements of gaseous atomic potassium, K(g), using robust optical absorption techniques can provide valuable insight into the K chemistry. However, for typical parts per billion K(g) concentrations in biomass flames and reactor gases, the product of atomic line strength and absorption path length can give rise to such high absorbance that the sample becomes opaque around the transition line center. We present a tunable diode laser atomic absorption spectroscopy (TDLAAS) methodology that enables accurate, calibration-free species quantification even under optically thick conditions, given that Beer-Lambert's law is valid. Analyte concentration and collisional line shape broadening are simultaneously determined by a least-squares fit of simulated to measured absorption profiles. Method validation measurements of K(g) concentrations in saturated potassium hydroxide vapor in the temperature range 950-1200 K showed excellent agreement with equilibrium calculations, and a dynamic range from 40 pptv cm to 40 ppmv cm. The applicability of the compact TDLAAS sensor is demonstrated by real-time detection of K(g) concentrations close to biomass pellets during atmospheric combustion in a laboratory reactor.

  4. Nonlinear optical properties of laser synthesized Pt nanoparticles: saturable and reverse saturable absorption

    Science.gov (United States)

    Chehrghani, A.; Torkamany, M. J.

    2014-01-01

    In this paper, the spectral and nonlinear optical properties of a colloidal solution of platinum nanoparticles (Pt NPs) in water are presented. The Pt NPs were prepared by laser ablation of a Pt metallic target in distilled water using a 1064 nm high frequency Nd:YAG laser. The intensity-dependent nonlinear optical absorption and nonlinear refraction behaviors of the sample exposed to the 532 nm nanosecond laser pulses were investigated by applying the Z-scan technique. The saturated nonlinear absorption coefficient 5.4 × 10-7 cm W-1 was obtained in a saturation intensity of 1.8 × 107 W cm-2. The saturable absorption response of the Pt NPs was switched to the reverse saturable absorption in the higher laser intensities. The nonlinear refractive index that has a negative value was increased from -3.5 × 10-13 cm2 W-1 up to -15 × 10-13 cm2 W-1 by increasing the laser intensity.

  5. Optical cross-connect circuit using hitless wavelength selective switch.

    Science.gov (United States)

    Goebuchi, Yuta; Hisada, Masahiko; Kato, Tomoyuki; Kokubun, Yasuo

    2008-01-21

    We have proposed and demonstrated the basic elements of a full matrix optical switching circuit (cross-connect circuit) using a hitless wavelength selective switch (WSS). The cross-connect circuits are made of a multi-wavelength channel selective switch consisting of cascaded hitless WSSs, and a multi-port switch. These switching elements are realized through the individual Thermo-Optic (TO) tuning of a series-coupled microring resonator, and can switch arbitrary wavelength channels without blocking other wavelength channels during tuning. We demonstrate a four wavelength selective switch using a parallel topology of double series coupled microring resonators and a three wavelength selective switch using a parallel topology of quadruple series coupled microring resonators. Since the spectrum shape of quadruple series coupled microring is much more box-like than the double series, a high extinction ratio of 39.0-46.6 dB and low switching cross talk of 19.3-24.5 dB were achieved.

  6. X-RAY ABSORPTION SPECTROSCOPY OF YB3+-DOPED OPTICAL FIBERS

    Energy Technology Data Exchange (ETDEWEB)

    Citron, Robert; Kropf, A.J.

    2008-01-01

    Optical fibers doped with Ytterbium-3+ have become increasingly common in fiber lasers and amplifiers. Yb-doped fibers provide the capability to produce high power and short pulses at specific wavelengths, resulting in highly effective gain media. However, little is known about the local structure, distribution, and chemical coordination of Yb3+ in the fibers. This information is necessary to improve the manufacturing process and optical qualities of the fibers. Five fibers doped with Yb3+ were studied using Extended X-ray Absorption Fine Structure (EXAFS) spectroscopy and X-ray Absorption Near Edge Spectroscopy (XANES), in addition to Yb3+ mapping. The Yb3+ distribution in each fiber core was mapped with 2D and 1D intensity scans, which measured X-ray fluorescence over the scan areas. Two of the five fibers examined showed highly irregular Yb3+ distributions in the core center. In four of the five fibers Yb3+ was detected outside of the given fiber core dimensions, suggesting possible Yb3+ diffusion from the core, manufacturing error, or both. X-ray absorption spectroscopy (XAS) analysis has so far proven inconclusive, but did show that the fibers had differing EXAFS spectra. The Yb3+ distribution mapping proved highly useful, but additional modeling and examination of fiber preforms must be conducted to improve XAS analysis, which has been shown to have great potential for the study of similar optical fi bers.

  7. Dielectric core-shell optical antennas for strong solar absorption enhancement.

    Science.gov (United States)

    Yu, Yiling; Ferry, Vivian E; Alivisatos, A Paul; Cao, Linyou

    2012-07-11

    We demonstrate a new light trapping technique that exploits dielectric core-shell optical antennas to strongly enhance solar absorption. This approach can allow the thickness of active materials in solar cells lowered by almost 1 order of magnitude without scarifying solar absorption capability. For example, it can enable a 70 nm thick hydrogenated amorphous silicon (a-Si:H) thin film to absorb 90% of incident solar radiation above the bandgap, which would otherwise require a thickness of 400 nm in typical antireflective coated thin films. This strong enhancement arises from a controlled optical antenna effect in patterned core-shell nanostructures that consist of absorbing semiconductors and nonabsorbing dielectric materials. This core-shell optical antenna benefits from a multiplication of enhancements contributed by leaky mode resonances (LMRs) in the semiconductor part and antireflection effects in the dielectric part. We investigate the fundamental mechanism for this enhancement multiplication and demonstrate that the size ratio of the semiconductor and the dielectric parts in the core-shell structure is key for optimizing the enhancement. By enabling strong solar absorption enhancement, this approach holds promise for cost reduction and efficiency improvement of solar conversion devices, including solar cells and solar-to-fuel systems. It can generally apply to a wide range of inorganic and organic active materials. This dielectric core-shell antenna can also find applications in other photonic devices such as photodetectors, sensors, and solid-state lighting diodes.

  8. Doubling absorption in nanowire solar cells with dielectric shell optical antennas.

    Science.gov (United States)

    Kim, Sun-Kyung; Zhang, Xing; Hill, David J; Song, Kyung-Deok; Park, Jin-Sung; Park, Hong-Gyu; Cahoon, James F

    2015-01-14

    Semiconductor nanowires (NWs) often exhibit efficient, broadband light absorption despite their relatively small size. This characteristic originates from the subwavelength dimensions and high refractive indices of the NWs, which cause a light-trapping optical antenna effect. As a result, NWs could enable high-efficiency but low-cost solar cells using small volumes of expensive semiconductor material. Nevertheless, the extent to which the antenna effect can be leveraged in devices will largely determine the economic viability of NW-based solar cells. Here, we demonstrate a simple, low-cost, and scalable route to dramatically enhance the optical antenna effect in NW photovoltaic devices by coating the wires with conformal dielectric shells. Scattering and absorption measurements on Si NWs coated with shells of SiN(x) or SiO(x) exhibit a broadband enhancement of light absorption by ∼ 50-200% and light scattering by ∼ 200-1000%. The increased light-matter interaction leads to a ∼ 80% increase in short-circuit current density in Si photovoltaic devices under 1 sun illumination. Optical simulations reproduce the experimental results and indicate the dielectric-shell effect to be a general phenomenon for groups IV, II-VI, and III-V semiconductor NWs in both lateral and vertical orientations, providing a simple route to approximately double the efficiency of NW-based solar cells.

  9. Electron Spin Resonance and optical absorption spectroscopic studies of manganese centers in aluminium lead borate glasses

    Science.gov (United States)

    SivaRamaiah, G.; LakshmanaRao, J.

    2012-12-01

    Electron Spin Resonance (ESR) and optical absorption studies of 5Al2O3 + 75H3BO3 + (20-x)PbO + xMnSO4 (where x = 0.5, 1,1.5 and 2 mol% of MnSO4) glasses at room temperature have been studied. The ESR spectrum of all the glasses exhibits resonance signals with effective isotropic g values at ≈2.0, 3.3 and 4.3. The ESR resonance signal at isotropic g ≈ 2.0 has been attributed to Mn2+ centers in an octahedral symmetry. The ESR resonance signals at isotropic g ≈ 3.3 and 4.3 have been attributed to the rhombic symmetry of the Mn2+ ions. The zero-field splitting parameter (zfs) has been calculated from the intensities of the allowed hyperfine lines. The optical absorption spectrum exhibits an intense band in the visible region and it has been attributed to 5Eg → 5T2g transition of Mn3+centers in an octahedral environment. The optical band gap and the Urbach energies have been calculated from the ultraviolet absorption edges.

  10. Vacuum-UV spectroscopy of interstellar ice analogs. I. Absorption cross-sections of polar-ice molecules

    CERN Document Server

    Cruz-Diaz, G A; Chen, Y -J; Yih, T -S

    2014-01-01

    The VUV absorption cross sections of most molecular solids present in interstellar ice mantles with the exception of H2O, NH3, and CO2 have not been reported yet. Models of ice photoprocessing depend on the VUV absorption cross section of the ice to estimate the penetration depth and radiation dose, and in the past, gas phase cross section values were used as an approximation. We aim to estimate the VUV absorption cross section of molecular ice components. Pure ices composed of CO, H2O, CH3OH, NH3, or H2S were deposited at 8 K. The column density of the ice samples was measured in situ by infrared spectroscopy in transmittance. VUV spectra of the ice samples were collected in the 120-160 nm (10.33-7.74 eV) range using a commercial microwave-discharged hydrogen flow lamp. We provide VUV absorption cross sections of the reported molecular ices. Our results agree with those previously reported for H2O and NH3 ices. Vacuum-UV absorption cross section of CH3OH, CO, and H2S in solid phase are reported for the first...

  11. Principles of femtosecond X-ray/optical cross-correlation with X-ray induced transient optical reflectivity in solids

    OpenAIRE

    Eckert, S.; Beye, M.; Schlotter, W. F.; Dakovski, G. L.; Khalil, M.; Huse, N.; Föhlisch, A.; Pietzsch, A.; Quevedo, W.; Hantschmann, M.; Ochmann, M.; Ross, M.; Minitti, M. P.; Turner, J. J.; Moeller, S. P.

    2015-01-01

    The discovery of ultrafast X-ray induced optical reflectivity changes enabled the development of X-ray/optical cross correlation techniques at X-ray free electron lasers worldwide. We have now linked through experiment and theory the fundamental excitation and relaxation steps with the transient optical properties in finite solid samples. Therefore, we gain a thorough interpretation and an optimized detection scheme of X-ray induced changes to the refractive index and the X-ray/optical cross ...

  12. Principles of femtosecond X-ray/optical cross-correlation with X-ray induced transient optical reflectivity in solids

    Energy Technology Data Exchange (ETDEWEB)

    Eckert, S., E-mail: sebastian.eckert@helmholtz-berlin.de, E-mail: martin.beye@helmholtz-berlin.de; Beye, M., E-mail: sebastian.eckert@helmholtz-berlin.de, E-mail: martin.beye@helmholtz-berlin.de; Pietzsch, A.; Quevedo, W.; Hantschmann, M. [Institute for Methods and Instrumentation in Synchrotron Radiation Research, Helmholtz-Zentrum Berlin für Materialien und Energie GmbH, Albert-Einstein-Str. 15, 12489 Berlin (Germany); Ochmann, M.; Huse, N. [Institute for Nanostructure and Solid State Physics, University of Hamburg, Jungiusstr. 11, 20355 Hamburg, Germany and Max Planck Institute for the Structure and Dynamics of Matter, Center for Free-Electron Laser Science, Luruper Chaussee 149, 22761 Hamburg (Germany); Ross, M.; Khalil, M. [Department of Chemistry, University of Washington, Box 351700, Seattle, Washington 98195 (United States); Minitti, M. P.; Turner, J. J.; Moeller, S. P.; Schlotter, W. F.; Dakovski, G. L. [LCLS, SLAC National Accelerator Laboratory, 2575 Sand Hill Road, Menlo Park, California 94025 (United States); Föhlisch, A. [Institute for Methods and Instrumentation in Synchrotron Radiation Research, Helmholtz-Zentrum Berlin für Materialien und Energie GmbH, Albert-Einstein-Str. 15, 12489 Berlin (Germany); Institut für Physik und Astronomie, Universität Potsdam, Karl-Liebknecht-Str. 24/25, 14476 Potsdam (Germany)

    2015-02-09

    The discovery of ultrafast X-ray induced optical reflectivity changes enabled the development of X-ray/optical cross correlation techniques at X-ray free electron lasers worldwide. We have now linked through experiment and theory the fundamental excitation and relaxation steps with the transient optical properties in finite solid samples. Therefore, we gain a thorough interpretation and an optimized detection scheme of X-ray induced changes to the refractive index and the X-ray/optical cross correlation response.

  13. Three-dimensional printed optical phantoms with customized absorption and scattering properties.

    Science.gov (United States)

    Diep, Phuong; Pannem, Sanjana; Sweer, Jordan; Lo, Justine; Snyder, Michael; Stueber, Gabriella; Zhao, Yanyu; Tabassum, Syeda; Istfan, Raeef; Wu, Junjie; Erramilli, Shyamsunder; Roblyer, Darren

    2015-11-01

    Three-dimensional (3D) printing offers the promise of fabricating optical phantoms with arbitrary geometry, but commercially available thermoplastics provide only a small range of physiologically relevant absorption (µa) and reduced scattering (µs`) values. Here we demonstrate customizable acrylonitrile butadiene styrene (ABS) filaments for dual extrusion 3D printing of tissue mimicking optical phantoms. µa and µs` values were adjusted by incorporating nigrosin and titanium dioxide (TiO2) in the filament extrusion process. A wide range of physiologically relevant optical properties was demonstrated with an average repeatability within 11.5% for µa and 7.71% for µs`. Additionally, a mouse-simulating phantom, which mimicked both the geometry and optical properties of a hairless mouse with an implanted xenograft tumor, was printed using dual extrusion methods. 3D printed tumor optical properties matched the live tumor with less than 3% error at a wavelength of 659 nm. 3D printing with user defined optical properties may provide a viable method for durable optically diffusive phantoms for instrument characterization and calibration.

  14. Vacuum-UV spectroscopy of interstellar ice analogs. I. Absorption cross-sections of polar-ice molecules

    Science.gov (United States)

    Cruz-Diaz, G. A.; Muñoz Caro, G. M.; Chen, Y.-J.; Yih, T.-S.

    2014-02-01

    Context. The vacuum-UV (VUV) absorption cross sections of most molecular solids present in interstellar ice mantles with the exception of H2O, NH3, and CO2 have not been reported yet. Models of ice photoprocessing depend on the VUV absorption cross section of the ice to estimate the penetration depth and radiation dose, and in the past, gas phase cross section values were used as an approximation. Aims: We aim to estimate the VUV absorption cross section of molecular ice components. Methods: Pure ices composed of CO, H2O, CH3OH, NH3, or H2S were deposited at 8 K. The column density of the ice samples was measured in situ by infrared spectroscopy in transmittance. VUV spectra of the ice samples were collected in the 120-160 nm (10.33-7.74 eV) range using a commercial microwave-discharged hydrogen flow lamp. Results: We provide VUV absorption cross sections of the reported molecular ices. Our results agree with those previously reported for H2O and NH3 ices. Vacuum-UV absorption cross section of CH3OH, CO, and H2S in solid phase are reported for the first time. H2S presents the highest absorption in the 120-160 nm range. Conclusions: Our method allows fast and readily available VUV spectroscopy of ices without the need to use a synchrotron beamline. We found that the ice absorption cross sections can be very different from the gas-phase values, and therefore, our data will significantly improve models that simulate the VUV photoprocessing and photodesorption of ice mantles. Photodesorption rates of pure ices, expressed in molecules per absorbed photon, can be derived from our data. Data can be found at http://ghosst.osug.fr/

  15. Block matching 3D random noise filtering for absorption optical projection tomography

    Energy Technology Data Exchange (ETDEWEB)

    Fumene Feruglio, P; Vinegoni, C; Weissleder, R [Center for Systems Biology, Massachusetts General Hospital, Harvard Medical School, 185 Cambridge Street, Boston, MA 02114 (United States); Gros, J [Department of Genetics, Harvard Medical School, 77 Avenue Louis Pasteur, Boston MA 02115 (United States); Sbarbati, A, E-mail: cvinegoni@mgh.harvard.ed [Department of Morphological and Biomedical Sciences, University of Verona, Strada Le Grazie 8, 37134 Verona (Italy)

    2010-09-21

    Absorption and emission optical projection tomography (OPT), alternatively referred to as optical computed tomography (optical-CT) and optical-emission computed tomography (optical-ECT), are recently developed three-dimensional imaging techniques with value for developmental biology and ex vivo gene expression studies. The techniques' principles are similar to the ones used for x-ray computed tomography and are based on the approximation of negligible light scattering in optically cleared samples. The optical clearing is achieved by a chemical procedure which aims at substituting the cellular fluids within the sample with a cell membranes' index matching solution. Once cleared the sample presents very low scattering and is then illuminated with a light collimated beam whose intensity is captured in transillumination mode by a CCD camera. Different projection images of the sample are subsequently obtained over a 360{sup 0} full rotation, and a standard backprojection algorithm can be used in a similar fashion as for x-ray tomography in order to obtain absorption maps. Because not all biological samples present significant absorption contrast, it is not always possible to obtain projections with a good signal-to-noise ratio, a condition necessary to achieve high-quality tomographic reconstructions. Such is the case for example, for early stage's embryos. In this work we demonstrate how, through the use of a random noise removal algorithm, the image quality of the reconstructions can be considerably improved even when the noise is strongly present in the acquired projections. Specifically, we implemented a block matching 3D (BM3D) filter applying it separately on each acquired transillumination projection before performing a complete three-dimensional tomographical reconstruction. To test the efficiency of the adopted filtering scheme, a phantom and a real biological sample were processed. In both cases, the BM3D filter led to a signal-to-noise ratio

  16. 1-[4-(methylsulfanyl) phenyl]-3-(4-nitropshenyl) prop-2-en-1-one: A reverse saturable absorption based optical limiter

    Energy Technology Data Exchange (ETDEWEB)

    Raghavendra, Subrayachar, E-mail: raghuphotonics@gmail.com [Department of Studies in Physics, Mangalore University, Mangalore, 574199 (India); Chidankumar, Chandraju Sadolalu [X-ray Crystallography Unit, School of Physics, 11800 USM, Universiti Sains Malaysia Penang (Malaysia); Jayarama, Arasalike [Department of Physics, Sadguru Swami Nithyananda Institute of Technology (SSNIT), Kanhangad, 671315 (India); Dharmaprakash, Sampyady Medappa [Department of Studies in Physics, Mangalore University, Mangalore, 574199 (India)

    2015-01-15

    An organic nonlinear optical material “1-[4-(methylsulfanyl) phenyl]-3-(4-nitrophenyl) prop-2-en-1-one” (4MPNP) has been synthesized by Claisen–Schmidt condensation and crystallized by slow evaporation technique at ambient temperature. The functional groups present in 4MPNP molecule were identified by FTIR spectroscopy. TGA-DSC analysis in the temperature range 30{sup o}C–650 °C showed absence of phase transition before melting point. The crystal structure of 4MPNP was determined using X-ray single crystal diffraction technique. UV–Vis absorption studies were carried out in the wavelength range 190–800 nm. Beyond the cut off wavelength 4MPNP is optically transparent in the entire visible region of the spectrum. Open aperture Z-Scan experimental curve showed that the 4MPNP molecule exhibits minimum transmittance at the focus and maximum nonlinear absorptionat532 nm wavelength. The variation of normalized transmittance with laser power density indicates good optical limiting behavior of the molecule. Nonlinear optical absorption coefficient (β), excited state absorption cross-section (σ{sub ex}) and ground state absorption cross-section (σ{sub g}) are estimated and found to be 4.5 cm/GW, 5.17 × 10{sup −18} cm{sup 2} and 5.68 × 10{sup −21} cm{sup 2} respectively. The values σ{sub ex}>>σ{sub g} indicate that 4MPNP crystal has the property of reverse saturable absorption. The studies recommend that 4MPNPcan be considered as a potential material for third order nonlinear optical device applications such as optical limiters. - Highlights: • Beyond the cut off wavelength 4MPNP is transparent in entire visible region. • Potential material for nonlinear optical device applications such as optical limiters. • TGA curve indicates that 4MPNP is almost stable up to melting point. • Band gap of 4MPNP is found to be 3.06 eV.

  17. First-principles calculation of multiphoton absorption cross section of α-quartz under femtosecond laser irradiation

    Science.gov (United States)

    Yu, Dong; Jiang, Lan; Wang, Feng; Qu, Liangti; Lu, Yongfeng

    2016-05-01

    Time-dependent density functional theory-based first-principles calculations have been used to study the ionization process and electron excitation. The results show that the number of excited electrons follows the power law σ k I k at peak intensities of I key role. The multiphoton absorption cross section of α-quartz σ k is further calculated to be 3.54 × 1011 cm-3 ps-1 (cm2/TW)6. Using the plasma model, the theoretical results of the damage threshold fluences are consistent with the experimental data, which validates the calculated value of multiphoton absorption cross section. By employing the calculated cross section value in the plasma model, the damage threshold fluences are theoretically estimated, being consistent with the experimental data, which validates the calculated value of multiphoton absorption cross section. The preliminary multiscale model shows great potential in the simulation of laser processing.

  18. Gas detection techniques with fiber optical spectrum absorption at near-IR wavelength

    Science.gov (United States)

    Liu, Tiegen; Liu, Kun; Jiang, Junfeng; Peng, Gangding; Wang, Yan; Jia, Dagong; Zhang, Hongxia; Jing, Wencai; Zhang, Yimo

    2010-04-01

    Detection of pollution gas is important in environmental and pollution monitoring, which can be used widely in mining and petrochemical industry. Fiber optical spectrum absorption (FOSA) at near-IR wavelength is widely used in gas detection due to its essential advantages. It has attracted considerable attention, and there are several types and methods in FOSA. Wavelength modulation technique (WMT) is one of them, which will improve the gas detection sensitivity dramatically. This technique can be realized by detecting the intensity of the second-harmonic component signal. Intra-cavity laser spectroscopy (ICLS) is another alternative technique for high sensitivity absorption measurement. With an absorber directly placed within the laser cavity, a short absorption cell can be transformed into a high sensitivity system. But the practical sensitivity is obviously less than the theoretical value. The authors did some works in these fields and have obtained some remarkable progress. With broad reflectors instead of FBG as mirror of the cavity and wavelength sweep technique (WST), several absorption spectra of detected gas can be collected. And the detection sensitivity can be enhanced sharply by averaging the results of each spectrum, with acetylene sensitivity less than 100 ppm . When ICLS is used combined with WST and WMT, the detection sensitivity of acetylene can be enhanced further. The sensitivity is less than 75 ppm. By using FBGs as wavelength references, the absorption wavelength of the detected gas is obtained, which can be used to realize gas recognition. The system is capable of accessing into fiber intelligent sensing network.

  19. Optical hydrogen absorption consistent with a thin bow shock leading the hot Jupiter HD 189733b

    CERN Document Server

    Cauley, P Wilson; Jensen, Adam G; Barman, Travis; Endl, Michael; Cochran, William D

    2015-01-01

    Bow shocks are ubiquitous astrophysical phenomena resulting from the supersonic passage of an object through a gas. Recently, pre-transit absorption in UV metal transitions of the hot Jupiter exoplanets HD 189733b and WASP12-b have been interpreted as being caused by material compressed in a planetary bow shock. Here we present a robust detection of a time-resolved pre-transit, as well as in-transit, absorption signature around the hot Jupiter exoplanet HD 189733b using high spectral resolution observations of several hydrogen Balmer lines. The line shape of the pre-transit feature and the shape of the time series absorption provide the strongest constraints on the morphology and physical characteristics of extended structures around an exoplanet. The in-transit measurements confirm the previous exospheric H-alpha detection although the absorption depth measured here is ~50% lower. The pre-transit absorption feature occurs 125 minutes before the predicted optical transit, a projected linear distance from the ...

  20. Fast calculation method of complex space targets' optical cross section.

    Science.gov (United States)

    Han, Yi; Sun, Huayan; Li, Yingchun; Guo, Huichao

    2013-06-10

    This paper utilizes the optical cross section (OCS) to characterize the optical scattering characteristics of a space target under the conditions of Sun lighting. We derive the mathematical expression of OCS according to the radiometric theory, and put forward a fast visualization calculation method of complex space targets' OCS based on an OpenGL and 3D model. Through the OCS simulation of Lambert bodies (cylinder and sphere), the computational accuracy and speed of the algorithm were verified. By using this method, the relative error for OCS will not exceed 0.1%, and it only takes 0.05 s to complete a complex calculation. Additionally, we calculated the OCS of three actual satellites with bidirectional reflectance distribution function model parameters in visible bands, and results indicate that it is easy to distinguish the three targets by comparing their OCS curves. This work is helpful for the identification and classification of unresolved space target based on photometric characteristics.

  1. Development of low optical cross talk filters for VIIRS (JPSS)

    Science.gov (United States)

    Murgai, Vijay; Hendry, Derek; Downing, Kevin; Carbone, David; Potter, John

    2016-09-01

    The Visible/Infrared Imaging Radiometer Suite (VIIRS) is a key sensor on Suomi National Polar-orbiting Partnership (S-NPP) satellite launched on October 28, 2011 into a polar orbit of 824 km nominal altitude and the JPSS sensors currently being built and integrated. VIIRS collects radiometric and imagery data of the Earth's atmosphere, oceans, and land surfaces in 22 spectral bands spanning the visible and infrared spectrum from 0.4 to 12.5 μm. Interference filters assembled in `butcher-block' arrays mounted adjacent to focal plane arrays provide spectral definition. Out-of-band signal and out-of-band optical cross-talk was observed for bands in the 0.4 to 1 μm range in testing of VIIRS for S-NPP. Optical cross-talk is in-band or out-of-band light incident on an adjacent filter or adjacent region of the same filter reaching the detector. Out-of-band optical cross-talk results in spectral and spatial `impurities' in the signal and consequent errors in the calculated environmental parameters such as ocean color that rely on combinations of signals from more than one band. This paper presents results of characterization, specification, and coating process improvements that enabled production of filters with significantly reduced out of band light for Joint Polar Satellite System (JPSS) J1 and subsequent sensors. Total transmission and scatter measurements at a wavelength within the pass band can successfully characterize filter performance prior to dicing and assembling filters into butcher block assemblies. Coating and process development demonstrated performance on test samples followed by production of filters for J1 and J2. Results for J1 and J2 filters are presented.

  2. Optical measurements of absorption changes in two-layered diffusive media

    Energy Technology Data Exchange (ETDEWEB)

    Fabbri, Francesco [Department of Biomedical Engineering, Bioengineering Center, Tufts University, 4 Colby Street, Medford, MA 02155 (United States); Sassaroli, Angelo [Department of Biomedical Engineering, Bioengineering Center, Tufts University, 4 Colby Street, Medford, MA 02155 (United States); Henry, Michael E [McLean Hospital and Department of Psychiatry, Harvard Medical School, 115 Mill Street, Belmont, MA 02478 (United States); Fantini, Sergio [Department of Biomedical Engineering, Bioengineering Center, Tufts University, 4 Colby Street, Medford, MA 02155 (United States)

    2004-04-07

    We have used Monte Carlo simulations for a two-layered diffusive medium to investigate the effect of a superficial layer on the measurement of absorption variations from optical diffuse reflectance data processed by using: (a) a multidistance, frequency-domain method based on diffusion theory for a semi-infinite homogeneous medium; (b) a differential-pathlength-factor method based on a modified Lambert-Beer law for a homogeneous medium and (c) a two-distance, partial-pathlength method based on a modified Lambert-Beer law for a two-layered medium. Methods (a) and (b) lead to a single value for the absorption variation, whereas method (c) yields absorption variations for each layer. In the simulations, the optical coefficients of the medium were representative of those of biological tissue in the near-infrared. The thickness of the first layer was in the range 0.3-1.4 cm, and the source-detector distances were in the range 1-5 cm, which is typical of near-infrared diffuse reflectance measurements in tissue. The simulations have shown that (1) method (a) is mostly sensitive to absorption changes in the underlying layer, provided that the thickness of the superficial layer is {approx}0.6 cm or less; (2) method (b) is significantly affected by absorption changes in the superficial layer and (3) method (c) yields the absorption changes for both layers with a relatively good accuracy of {approx}4% for the superficial layer and {approx}10% for the underlying layer (provided that the absorption changes are less than 20-30% of the baseline value). We have applied all three methods of data analysis to near-infrared data collected on the forehead of a human subject during electroconvulsive therapy. Our results suggest that the multidistance method (a) and the two-distance partial-pathlength method (c) may better decouple the contributions to the optical signals that originate in deeper tissue (brain) from those that originate in more superficial tissue layers.

  3. Calibration-free absolute quantification of optical absorption coefficients using acoustic spectra in 3D photoacoustic microscopy of biological tissue.

    Science.gov (United States)

    Guo, Zijian; Hu, Song; Wang, Lihong V

    2010-06-15

    Optical absorption is closely associated with many physiological important parameters, such as the concentration and oxygen saturation of hemoglobin, and it can be used to quantify the concentrations of nonfluorescent molecules. We propose a method to use acoustic spectra of photoacoustic signals to quantify the absolute optical absorption. This method is self-calibrating and thus insensitive to variations in the optical fluence. Factors such as system bandwidth and acoustic attenuation can affect the quantification but can be canceled by dividing the acoustic spectra measured at two optical wavelengths. Using optical-resolution photoacoustic microscopy, we quantified the absolute optical absorption of black ink samples with various concentrations. We also quantified both the concentration and oxygen saturation of hemoglobin in a live mouse in absolute units.

  4. Far-field optical imaging with subdiffraction resolution enabled by nonlinear saturation absorption

    Science.gov (United States)

    Ding, Chenliang; Wei, Jingsong

    2016-01-01

    The resolution of far-field optical imaging is required to improve beyond the Abbe limit to the subdiffraction or even the nanoscale. In this work, inspired by scanning electronic microscopy (SEM) imaging, in which carbon (or Au) thin films are usually required to be coated on the sample surface before imaging to remove the charging effect while imaging by electrons. We propose a saturation-absorption-induced far-field super-resolution optical imaging method (SAI-SRIM). In the SAI-SRIM, the carbon (or Au) layers in SEM imaging are replaced by nonlinear-saturation-absorption (NSA) thin films, which are directly coated onto the sample surfaces using advanced thin film deposition techniques. The surface fluctuant morphologies are replicated to the NSA thin films, accordingly. The coated sample surfaces are then imaged using conventional laser scanning microscopy. Consequently, the imaging resolution is greatly improved, and subdiffraction-resolved optical images are obtained theoretically and experimentally. The SAI-SRIM provides an effective and easy way to achieve far-field super-resolution optical imaging for sample surfaces with geometric fluctuant morphology characteristics.

  5. Optical sensor instrumentation using absorption- and fluorescence-based capillary waveguide optrodes

    Science.gov (United States)

    Weigl, Bernhard H.; Draxler, Sonja; Kieslinger, Dietmar; Lehmann, H.; Trettnak, Wolfgang; Wolfbeis, Otto S.; Lippitsch, Max E.

    1995-09-01

    An analytical instrument comprising absorption- and fluorescence-based capillary waveguide optrodes (CWOs) is described. Glass capillaries with a chemically sensitive coating on the inner surface are used for optical chemical sensing in gaseous and liquid samples. In case of absorption-based CWOs, light from a LED is coupled into and out of the capillary under a defined angle via a rigid waveguide and an immersion coupler. The coated glass capillary forms an inhomogeneous waveguide, in which the light is guided in both the glass and the coating. The portion of the light which is absorbed in the chemically sensitive coating is proportional to a chemcial concentration or activity. This principle is demonstrated with a pCO2-sensitive inner coating. Typical relative light intensity signal changes with this type of optical interrogation are 98%, with an active capillary length of 10 mm. For fluorescence- based CWOs, the excitation light from an LED is coupled diffusely into the glass capillary and the optical sensor layer. A major portion of the excited fluorescence light is then collected within the coated capillary, and guided to the photodiode, which is located on the distal end of the capillary waveguide. Hereby, the excitation light is separated very efficiently from the fluorescent light. As an example, a CWO for pO2 is described. By applying this optical geometry, it was possible to utilize fluorescence decay time of the sensor layer as the transducer signal even when using solid state components (LEDs and photodiodes).

  6. Comparison of x-ray absorption spectra between water and ice: New ice data with low pre-edge absorption cross-section

    OpenAIRE

    Kaya, Sarp; Sellberg, Jonas A.; Segtnan, Vegard H.; Chen, Chen; Tyliszczak, Tolek; Ogasawara, Hirohito; Nordlund, Dennis; Pettersson, Lars G. M.; Nilsson, Anders

    2014-01-01

    The effect of crystal growth conditions on the O K-edge x-ray absorption spectra of ice is investigated through detailed analysis of the spectral features. The amount of ice defects is found to be minimized on hydrophobic surfaces, such as BaF2(111), with low concentration of nucleation centers. This is manifested through a reduction of the absorption cross-section at 535 eV, which is associated with distorted hydrogen bonds. Furthermore, a connection is made between the observed increase in ...

  7. Concentration distribution of Nd{sup 3+} In Nd:Gd{sub 3}Ga{sub 5}O{sub 12} crystals studied by optical absorption method

    Energy Technology Data Exchange (ETDEWEB)

    Sun, Dunlu; Zhang, Qingli; Wang, Zhaobing; Su, Jing; Gu, Changjiang; Wang, Aihua; Yin, Shaotang [Anhui Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, HeFei 230031 (China)

    2005-07-01

    Nd:Gd{sub 3}Ga{sub 5}O{sub 12} crystals with different concentrations of Nd{sup 3+} were grown by Czochralski method, their absorption spectra were measured at room temperature. By using the optical absorption method, the effective distribution coefficient k{sub eff} for Nd{sup 3+} in GGG was fitted to be 0.40{+-}0.01, which is higher than that of Nd{sup 3+} in YAG. The 808nm absorption cross-section was calculated to be 4.0{+-}0.2 x 10{sup -20} cm{sup -2}. The lengthways and radial concentration distribution of Nd{sup 3+} in the crystals were also analyzed and discussed. (copyright 2005 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  8. Coherent absorption of light by graphene and other optically conducting surfaces in realistic on-substrate configurations

    Directory of Open Access Journals (Sweden)

    S. Zanotto

    2017-01-01

    Full Text Available Analytical formulas are derived describing the coherent absorption of light from a realistic multilayer structure composed by an optically conducting surface on a supporting substrate. The model predicts two fundamental results. First, the absorption regime named coherent perfect transparency theoretically can always be reached. Second, the optical conductance of the surface can be extrapolated from absorption experimental data even when the substrate thickness is unknown. The theoretical predictions are experimentally verified by analyzing a multilayer graphene structure grown on a silicon carbide substrate. The graphene thickness estimated through the coherent absorption technique resulted in good agreement with the values obtained by two other spectroscopic techniques. Thanks to the high spatial resolution that can be reached and high sensitivity to the probed structure thickness, coherent absorption spectroscopy represents an accurate and non-destructive diagnostic method for the spatial mapping of the optical properties of two-dimensional materials and of metasurfaces on a wafer scale.

  9. Modified optical absorption of molecules on metallic nanoparticles at sub-monolayer coverage

    CERN Document Server

    Darby, Brendan L; Meyer, Matthias; Pantoja, Andres E; Ru, Eric C Le

    2015-01-01

    Enhanced optical absorption of molecules in the vicinity of metallic nanostructures is key to a number of surface-enhanced spectroscopies and of great general interest to the fields of plasmonics and nano-optics. Yet, experimental access to this absorbance has long proven elusive. We here present direct measurements of the intrinsic absorbance of dye-molecules adsorbed onto silver nanospheres, and crucially, at sub-monolayer concentrations where dye--dye interactions become negligible. With a large detuning from the plasmon resonance, distinct shifts and broadening of the molecular resonances reveal the intrinsic properties of the dye in contact with the metal colloid, in contrast to the often studied strong-coupling regime where the optical properties of the dye-molecules cannot be isolated. The observation of these shifts together with the ability to routinely measure them has broad implications in the interpretation of experiments involving resonant molecules on metallic surfaces, such as surface-enhanced ...

  10. Linear and Nonlinear Optical Absorptions of a Hydrogenic Donor in a Quantum Dot Under a Magnetic Field

    Institute of Scientific and Technical Information of China (English)

    XIE Wen-Fang

    2009-01-01

    The linear and nonlinear optical properties of a hydrogenic donor in a disc-like parabolic quantum dot in the presence of an external magnetic field are studied. The calculations were performed within the effective mass approximation, using the matrix diagonalization method and the compact density-matrix approach. The linear and nonlinear optical absorption coefficients between the ground (L = 0) and the first excited state (L = 1) have been examined based on the computed energies and wave functions. We find that the linear, nonlinear third-order, and total optical absorption coefficients are strongly affected by the confinement strength of QDs, the external magnetic field, and the incident optical intensity.

  11. The effect of metal nano particle on optical absorption coefficient of multi-layer spherical quantum dot

    Energy Technology Data Exchange (ETDEWEB)

    Zamani, N., E-mail: n.zamani@sutech.ac.ir [Department of Physics, College of Science, Shiraz University, Shiraz 71454 (Iran, Islamic Republic of); Keshavarz, A., E-mail: keshavarz@sutech.ac.ir [Department of Physics, Shiraz University of Technology, Shiraz 71555-313 (Iran, Islamic Republic of); Nadgaran, H., E-mail: nadgaran@susc.ac.ir [Department of Physics, College of Science, Shiraz University, Shiraz 71454 (Iran, Islamic Republic of)

    2016-06-01

    In this paper, we investigate the optical absorption coefficient of hybrid structure consisting of metal nano particle (MNP) coupled to multi-layer spherical quantum dot (MSQD). Energy eigenvalues and eigenfunctions of Schrödinger equation in this structure are obtained by using numerical solution (by the fourth-order Runge–Kutta method). The effect of MNP in the vicinity of MSQD is calculated by considering local field theory. Then the variation of optical absorption coefficient hybrid structure is calculated. The results show that the presence of MNP near MSQD enhances the optical absorption coefficient. Also, by changing the distance between MNP and MSQD and radius of MNP, variation of optical absorption coefficient and refractive index changes are introduced.

  12. The effect of metal nano particle on optical absorption coefficient of multi-layer spherical quantum dot

    Science.gov (United States)

    Zamani, N.; Keshavarz, A.; Nadgaran, H.

    2016-06-01

    In this paper, we investigate the optical absorption coefficient of hybrid structure consisting of metal nano particle (MNP) coupled to multi-layer spherical quantum dot (MSQD). Energy eigenvalues and eigenfunctions of Schrödinger equation in this structure are obtained by using numerical solution (by the fourth-order Runge-Kutta method). The effect of MNP in the vicinity of MSQD is calculated by considering local field theory. Then the variation of optical absorption coefficient hybrid structure is calculated. The results show that the presence of MNP near MSQD enhances the optical absorption coefficient. Also, by changing the distance between MNP and MSQD and radius of MNP, variation of optical absorption coefficient and refractive index changes are introduced.

  13. Band gap shift and the optical nonlinear absorption of sputtered ZnO-TiO2 films.

    Science.gov (United States)

    Han, Yi-Bo; Han, Jun-Bo; Hao, Zhong-Hua

    2011-06-01

    ZnO-TiO2 composite films with different Zn/Ti atomic ratios were prepared with radio frequency reactive sputtering method. The Zn percentage composition (f(Zn)) dependent optical band gap and optical nonlinear absorption were investigated using the transmittance spectrum and the Z-scan technique, respectively. The results showed that composite films with f(Zn) in the range of 23.5%-88.3% are poor crystallized and their optical properties are anomalous which exhibit adjustable optical band gap and large optical nonlinear absorption. The optical absorption edge shifted to the blue wavelength direction with the increasing of f(Zn) and reached the minimum value of 285 nm for the sample with f(Zn) = 70.5%, which has the largest direct band gap of 4.30 eV. Further increasing of f(Zn) resulted in the red-shift of the optical absorption edge. The maximum optical nonlinear absorption coefficient of 1.5 x 10(3) cm/GW was also obtained for the same sample with f(Zn) = 70.5%, which is more than 40 times larger than those of pure TiO2 and ZnO films.

  14. Fiber optic immunosensor for cross-linked fibrin concentration

    Science.gov (United States)

    Moskowitz, Samuel E.

    2000-08-01

    Working with calcium ions in the blood, platelets produce thromboplastin which transforms prothrombin into thrombin. Removing peptides, thrombin changes fibrinogen into fibrin. Cross-linked insoluble fibrin polymers are solubilized by enzyme plasmin found in blood plasma. Resulting D-dimers are elevated in patients with intravascular coagulation, deep venous thrombosis, pulmonary embolism, myocardial infarction, multiple trauma, cancer, impaired renal and liver functions, and sepsis. Consisting principally of a NIR 780 nm GaAlAs laser diode and a 800 nm avalanche photodiode (APD), the fiber-optic immunosensor can determined D-dimer concentration to levels detected by a second antibody which is labeled with NN 382 fluorescent dye. An evanescent wave traveling on an excitation optical fiber excites the antibody-antigen fluorophore complex. Concentration of cross-linked fibrin is directly proportional to the APD measured intensity of fluorescence. NIR fluorescence has advantages of low background interference, short fluorescence lifetime, and large difference between excitation and emission peaks. Competitive ELISA test for D-dimer concentration requires trained personnel performing a time consuming operation.

  15. The Application of Atomic Absorption Spectroscopy and Optical Microscopy to the Characterization of Sized Airborne Particulate in Dayton, Ohio.

    Science.gov (United States)

    1978-01-01

    PERIOD COVERED " AneT Appication of Atomic Absorption Spectroscopy ’ and Optical Microscopy to the Characterization of THESIS/DISSERTATION 4 Sized...1978 U I HEREBY REC04MEND THAT THE THESIS PREPARED ’NDER MY SUPERVISION BY Lorelei Ann Krebs ENTITLED The Application of Atomic Absorption Spectroscopy and...acid and diluted with distilled water in a 25 milliliter volumetric flask. Atomic absorption . spectroscopy was used to analyze the solutions for

  16. Optical Absorption, Emission, and Modulation in Iii-V Semiconductor Quantum Well Structures

    Science.gov (United States)

    Shank, Steven Marc

    An experimental study of topics relating to optical absorption, emission, and modulation in III-V semiconductor GaAs/AlGaAs quantum well structures is presented. Several novel quantum well structures are examined and evaluated for use in electrooptic modulators, laser diodes, and monolithically integrated laser diodes and passive waveguides. The design of the epitaxial structures, the molecular beam epitaxy growth, the optical characterization of the wafers, the fabrication of the wafers into basic optoelectronic devices (electrooptic waveguides, laser diodes, and segmented laser diodes), and the characterization of these devices are described. The quantum confined Stark effect and its influence on the electrooptic properties of quantum wells are described. In particular, electroabsorption and electrobirefringence in (111)B quantum wells are investigated. This quantum well system is chosen due to the larger heavy hole effective mass compared to standard (100) quantum wells. It is demonstrated that electroabsorption and electrobirefringence are enhanced in (111)B quantum wells, which agrees with theoretical predictions based on the heavy hole mass anisotropy. Computer simulations of the quantum confined Stark effect in asymmetric quantum well structures are described. It is demonstrated that asymmetric quantum wells can exhibit enhanced red shifts of the absorption edge, and blue shifts of the absorption edge under an applied reverse bias. An experimental investigation of laser diodes with asymmetric quantum well active regions is described. An evaluation of the blue shift effect on the interband absorption at the laser wavelength is made and related to the efficiency of these structures for monolithic integration with passive waveguides. The optical properties of n-type modulation doped quantum wells are described. It is shown that the interband absorption at the spontaneous emission peak can be greatly reduced compared to undoped quantum wells. N-type modulation

  17. Characterizing the Absorption Properties for Remote Sensing of Three Small Optically-Diverse South African Reservoirs

    Directory of Open Access Journals (Sweden)

    Mark William Matthews

    2013-09-01

    Full Text Available Characterizing the specific inherent optical properties (SIOPs of water constituents is fundamental to remote sensing applications. Therefore, this paper presents the absorption properties of phytoplankton, gelbstoff and tripton for three small, optically-diverse South African inland waters. The three reservoirs,  Hartbeespoort, Loskop and Theewaterskloof, are challenging for remote sensing, due to differences in phytoplankton assemblage and the considerable range of constituent concentrations. Relationships between the absorption properties and biogeophysical parameters, chlorophyll-a (chl-a, TChl (chl-a plus  phaeopigments,  seston,  minerals  and  tripton, are established. The value determined for the mass-specific tripton absorption coefficient at 442 nm, a∗ (442, ranges from 0.024 to 0.263 m2·g−1. The value of the TChl-specific phytoplankton absorption coefficient (a∗ was strongly influenced by phytoplankton species, size, accessory pigmentation and biomass. a∗ (440 ranged from 0.056 to 0.018 m2·mg−1 in oligotrophic to hypertrophic waters. The positive relationship between cell size and trophic state observed in open ocean waters was violated by significant small cyanobacterial populations. The phycocyanin-specific phytoplankton  absorption  at  620  nm,  a∗ (620, was determined as 0.007 m2·g−1 in a M. aeruginosa bloom. Chl-a was a better indicator of phytoplankton biomass than phycocyanin (PC in surface scums, due to reduced accessory pigment production. Absorption budgets demonstrate that monospecific blooms of M. aeruginosa and C. hirundinella may be treated as “cultures”, removing some complexities for remote sensing applications.   These results contribute toward a better understanding of IOPs and remote sensing applications in hypertrophic inland waters. However, the majority of the water is optically complex, requiring the usage of all the SIOPs derived here for remote sensing applications. The

  18. Infrared Fel Measurements of Power Limiting by 2-Photon Absorption in Insb and Optical Pulse Length Measurements

    NARCIS (Netherlands)

    Jaroszynski, D. A.; Ortega, J. M.; Prazeres, R.; Glotin, F.; Murdin, B. N.; Merveille, C.; Kar, A. K.; Kimmitt, M. F.; Pidgeon, C. R.

    1993-01-01

    We have performed the first optical experiment using the laser output of the CLIO free electron laser. In a transmission experiment we have observed strong power limiting at wavelengths longer than the absorption edge at 7.5 mum associated with induced free carrier absorption produced by direct inte

  19. Optical Absorption and X—Ray DIffractionStudies of Sulfur Under High Pressure

    Institute of Scientific and Technical Information of China (English)

    陈良辰; 王莉君

    1999-01-01

    In situ high pressure optical absorption measurements of sulfur have been carried out by using DAC device with a TASCO V-550 UV-VIS spectrophotometer at pressures up to 41.6GPa.The curves of absorption edge vs pressure were obtained.in which there are two turning points at about 5 and 12GPa,corresponding to two changes of colour in the optical observation:one is from yellow to red and the other from red to black at 5-6\\5and 10-12GPa,respectively.The absorption edge reaches above 800nm when the pressure is increased to 23GPa.The sturcture and phase transitions have also been investigated by using in situ high pressure energy-dispersive x-ray diffraction with synchrotron radiation at pressures up to 33.7GPa.No structure phase transition occurs at 5-6GPa.but there is a new high-pressure phase,caused probably by the reorientation or ordering of S8.

  20. Method and apparatus for enhancing surface absorption and emissivity in optical pulsed infrared nondestructive evaluation

    Science.gov (United States)

    Duan, Yuxia; Zhang, Cunlin; Jin, Wanping; Wu, Naiming

    2009-07-01

    In the application of optical pulsed infrared NDE, the visible light absorption and IR emissivity of the detected object must be considered. One of the simple methods is spraying paint on the highly reflective and low IR emissivity surface before testing. However, for some materials such as with pore space in the surface or easily to be corrupted have to be pretreated by other method and apparatus. Two kinds of apparatus for surface pretreating are designed according to the dimension of the detected object and the testing conditions. One apparatus is independent of the former detecting system, and the other is an improvement of the former system. The basic principle of the two apparatus is covering a flexible membrane of high light absorption and IR emissivity on the specimen surface by vacuum pumping. The paper also present the applications of the method, including the detection of the metal mesh material and the honeycomb structures with aluminum coating. The experimental results show that the technique of covering thin film by vacuum pump is effective for enhancing surface absorption and emissivity; moreover, it does not pollute or damage the sample. The application of the technique has practical significance, because it extends the scope of the application of the optical pulsed thermography nondestructive evaluation.

  1. Semiperiodicity versus periodicity for ultra broadband optical absorption in thin-film solar cells

    Science.gov (United States)

    Jalali, Mandana; Nadgaran, Hamid; Erni, Daniel

    2016-07-01

    We propose the use of one-dimensional semiperiodic front and back gratings based on Thue-Morse, Fibonacci, and Rudin-Shapiro (RS) binary sequences as promising photon management techniques for enhancing ultra-broadband optical absorption in thin-film solar cells. The semiperiodicity allows an aggregate light in-coupling into the active layer within the range of the solar spectrum that is less weak compared to an inherently broadband random grating, but has a much larger bandwidth than the strong in-coupling via a periodic grating configuration. The proper design procedure proposed here deviates from a canonical double grating synthesis as it adheres to an ultra-broadband design where the spectrally integrated absorption in the active material is the proper subject to optimization, leaving the grating perturbations just a measure to perturb and mold the trapped light field in the active layer accordingly. It is shown that by using a well-defined RS double grating in a 400-nm thick crystalline silicon solar cell, a 110.2% enhancement of the spectrally integrated optical absorption can be achieved relative to the reference case without grating.

  2. Optical absorption in a disk-shaped quantum dot in the presence of an impurity

    Energy Technology Data Exchange (ETDEWEB)

    Mikhail, I.F.I., E-mail: ifi_mikhail@hotmail.com [Department of Mathematics, Faculty of Science, Ain Shams University, Cairo (Egypt); Shafee, A.M. [Department of Mathematics, Faculty of Girls, Art, Science and Education, Ain Shams University, Cairo (Egypt)

    2017-02-15

    The linear and third order nonlinear optical absorption coefficients have been calculated in a two dimensional disk quantum dot. The confinement potential has been taken to be a combination of a parabolic and inverse squared part. The study has been performed in the presence of a perpendicular static magnetic field and a central or off-central impurity. The resulting Schrödinger equation has been solved by applying the variational method. It has been found that the presence of impurity causes a huge increase in the square of the transition matrix and in the absorption coefficients, in particular in the third order coefficient. Moreover, the asymmetry which results in the case of off-central impurity has been dealt with carefully by taking into consideration the transition matrices which vanish in other cases. - Highlights: • The optical absorption in a two dimensional disk-shaped quantum dot is investigated. • A static magnetic field is applied perpendicular to the plane of the disk. • The study is performed in the presence of central or off- central impurity. • The variational approach has been applied to find the energies and wave functions. • The presence and location of impurity play effective roles.

  3. Optical absorption of the blue fluorescent protein: a first-principles study.

    Science.gov (United States)

    Lopez, Xabier; Marques, Miguel A L; Castro, Alberto; Rubio, Angel

    2005-09-07

    An extensive study of the optical absorption spectra of the blue fluorescent protein (BFP) is presented. We investigate different protonation states of the chromophore (neutral, anionic, and cationic) and analyze the role of the protein environment and of thermal fluctuations. The role of the environment is 2-fold: (i) it induces structural modifications of the gas-phase chromophore, the most important being the torsion of the imida rings; and (ii) it makes a local-field modification of the external electromagnetic field. It turns out that the torsion of the imida rings shifts significantly the gas-phase spectra to lower energies, whereas the consistent inclusion of the closest residues field produces only minor modifications on the spectra. From all of the configurations studied, the neutral cis-HSD and the anionic HSA seem to be the most likely candidates to explain the experimental spectrum. Furthermore, the present results clearly rule out the presence of the cationic protonation state (HSP) of the chromophore. However, a better description of the measured experimental absorption data may be obtained when the temperature fluctuations of the floppy torsional motion of the two imida rings are included. Our results, together with previous work on the green fluorescent protein, demonstrate the power of combining time-dependent density functional calculations and optical absorption measurements to discern the relevant chemical information on the nature and state of chromopeptides.

  4. VO 2+ ions in zinc lead borate glasses studied by EPR and optical absorption techniques

    Science.gov (United States)

    Prakash, P. Giri; Rao, J. Lakshmana

    2005-09-01

    Electron paramagnetic resonance (EPR) and optical absorption spectra of vanadyl ions in zinc lead borate (ZnO-PbO-B 2O 3) glass system have been studied. EPR spectra of all the glass samples exhibit resonance signals characteristic of VO 2+ ions. The values of spin-Hamiltonian parameters indicate that the VO 2+ ions in zinc lead borate glasses were present in octahedral sites with tetragonal compression and belong to C 4V symmetry. The spin-Hamiltonian parameters g and A are found to be independent of V 2O 5 content and temperature but changing with ZnO content. The decrease in Δ g∥/Δ g⊥ value with increase in ZnO content indicates that the symmetry around VO 2+ ions is more octahedral. The decrease in intensity of EPR signal above 10 mol% of V 2O 5 is attributed to a fall in the ratio of the number of V 4+ ions ( N4) to the number of V 5+ ions ( N5). The number of spins ( N) participating in resonance was calculated as a function of temperature for VO 2+ doped zinc lead borate glass sample and the activation energy was calculated. From the EPR data, the paramagnetic susceptibility was calculated at various temperatures and the Curie constant was evaluated from the 1/ χ- T graph. The optical absorption spectra show single absorption band due to VO 2+ ions in tetragonally distorted octahedral sites.

  5. Nonlinear absorption and optical damage threshold of carbon-based nanostructured material embedded in a protein

    Science.gov (United States)

    Janulewicz, K. A.; Hapiddin, A.; Joseph, D.; Geckeler, K. E.; Sung, J. H.; Nickles, P. V.

    2014-12-01

    Physical processes in laser-matter interaction used to be determined by generation of fast electrons resulting from efficient conversion of the absorbed laser radiation. Composite materials offer the possibility to control the absorption by choice of the host material and dopants. Reported here strong absorption of ultrashort laser pulse in a composite carbon-based nanomaterial including single-walled carbon nanotubes (SWCNTs) or multilayer graphene was measured in the intensity range between 1012 and 1016 W cm-2. A protein (lysozyme) was used as the host. The maximum absorption of femtosecond laser pulse has reached 92-96 %. The optical damage thresholds of the coatings were registered at an intensity of (1.1 ± 0.5) × 1013 W cm-2 for the embedded SWCNTs and at (3.4 ± 0.3) × 1013 W cm-2 for the embedded graphene. Encapsulated variant of the dispersed nanomaterial was investigated as well. It was found that supernatant protein in the coating material tends to dominate the absorption process, independently of the embedded nanomaterial. The opposite was observed for the encapsulated material.

  6. Dependence of Brillouin frequency shift on water absorption ratio in polymer optical fibers

    Science.gov (United States)

    Minakawa, Kazunari; Koike, Kotaro; Hayashi, Neisei; Koike, Yasuhiro; Mizuno, Yosuke; Nakamura, Kentaro

    2016-06-01

    We studied the dependence of the Brillouin frequency shift (BFS) on the water-absorption ratio in poly(methyl methacrylate)-based polymer optical fibers (POFs) to clarify the effect of the humidity on POF-based Brillouin sensors. The BFS, deduced indirectly using an ultrasonic pulse-echo technique, decreased monotonically as the water absorption ratio increased, mainly because of the decrease in the Young's modulus. For the same water absorption ratio, the BFS change was larger at a higher temperature. The maximal BFS changes (absolute values) at 40, 60, and 80 °C were 158, 285, and 510 MHz, respectively (corresponding to the temperature changes of ˜9 °C, ˜16 °C, and ˜30 °C). Thus, some countermeasure against the humidity is indispensable in implementing strain/temperature sensors based on Brillouin scattering in POFs, especially at a higher temperature. On the other hand, Brillouin-based distributed humidity sensors might be developed by exploiting the BFS dependence on water absorption in POFs.

  7. The analysis of time-resolved optical waveguide absorption spectroscopy based on positive matrix factorization.

    Science.gov (United States)

    Liu, Ping; Li, Zhu; Li, Bo; Shi, Guolong; Li, Minqiang; Yu, Daoyang; Liu, Jinhuai

    2013-08-01

    Time-resolved optical waveguide absorption spectroscopy (OWAS) makes use of an evanescent field to detect the polarized absorption spectra of sub-monomolecular adlayers. This technique is suitable for the investigation of kinetics at the solid/liquid interface of dyes, pigments, fluorescent molecules, quantum dots, metallic nanoparticles, and proteins with chromophores. In this work, we demonstrate the application of positive matrix factorization (PMF) to analyze time-resolved OWAS for the first time. Meanwhile, PCA is researched to compare with PMF. The absorption/desorption kinetics of Rhodamine 6G (R6G) onto a hydrophilic glass surface and the dynamic process of Meisenheimer complex between Cysteine and TNT are selected as samples to verify experimental system and analytical methods. The results are shown that time-resolved OWAS can well record the absorption/desorption of R6G onto a hydrophilic glass surface and the dynamic formation process of Meisenheimer complexes. The feature of OWAS extracted by PMF is dynamic and consistent with the results analyzed by the traditional function of time/wavelength-absorbance. Moreover, PMF prevents the negative factors from occurring, avoids contradicting physical reality, and makes factors more easily interpretable. Therefore, we believe that PMF will provide a valuable analysis route to allow processing of increasingly large and complex data sets.

  8. Crossed optical and chemical evaluations of modern glass soiling in various European urban environments

    Science.gov (United States)

    Favez, Olivier; Cachier, Hélène; Chabas, Anne; Ausset, Patrick; Lefevre, Roger

    As part of the MULTI-ASSESS and VIDRIO EC projects, the soiling of modern glass is characterised in various European urban atmospheres. Our original methodology relies on crossed chemical measurements of the deposit (evaluation of the ion, elemental and organic carbon contents, and subsequent "mass closure") and exhaustive measurements of glass optical properties (light reflectance, transmittance and absorption). Samples were exposed sheltered from rain in Athens, Krakow, London, Montelibretti (Italy), Prague and Troyes (France), during increasing exposure durations, up to more than two years. Although a slowing down of the deposition rate is observed for some species at some sites, no obvious saturation phenomenon seems to occur for the particle deposition. The chemical composition of the deposit is shown to reflect the atmospheric environment of the exposure site. Some post-deposit evolutions, such as the disappearance of ammonium and possibly of particulate organic matter, are found to occur. For thin deposits, the glass optical properties (e.g. light absorption and diffuse transmittance) are found to evolve quasi-linearly with species concentrations (EC and ions, respectively). However, for conditions creating heavier deposits such as long time exposures in rather polluted environments, a saturation phenomenon is observed. Using a simple model, light absorption, which is primarily due to EC particles, is shown to reach the saturation level ( S) for A≈16% and the concentration for which the semi-saturation level is reached (C 1/2) is found to be about 15 μgC of EC/cm 2. For diffuse transmittance, due to scattering species, these parameters are found to be about 30% and 65 μg of ions/cm 2, respectively. These values may be considered as representative of the soiling in Europe.

  9. Linear and nonlinear optical absorption characterization of natural laccaic acid dye

    Science.gov (United States)

    Zongo, S.; Dhlamini, M. S.; Kerasidou, A. P.; Beukes, P.; Sahraoui, B.; Maaza, M.

    2015-09-01

    We report on the optical performances of laccaic acid dye in solution at different concentrations and dye-poly(methyl methacrylate) composite thin films. The linear spectral characteristics including optical constants, i.e. refractive index ( n) and extinction coefficient ( k), were carried out in a comprehensive way through absorbance, fluorescence and ellipsometric studies. The nonlinear optical parameters such as nonlinear absorption coefficient β eff (or β 2), the imaginary third-order susceptibility (Im[ χ (3)]) and the imaginary part of second-order hyperpolarizability ( γ) of the samples were evaluated using the open-aperture Z-scan technique with a laser pulse duration of 10 ns at 532 nm wavelength. The corresponding numerical values of these parameters were of 10-10, 10-11 and 10-32 order, respectively. Two-photon absorption was revealed to be the main driving physical mechanism in the nonlinear response. This suggests that laccaic acid dye can be a potential candidate for NLO materials application.

  10. Optical absorption in transparent PDMS materials applied for multimode waveguides fabrication

    Science.gov (United States)

    Cai, D. K.; Neyer, A.; Kuckuk, R.; Heise, H. M.

    2008-03-01

    The optical properties of transparent PDMS polymer materials, which can be integrated into general printed circuit board (PCB) for data communication, are of great interest due to the substantial market expectations for the near future. For the present paper, it was found that the absorption loss in polydimethylsiloxane (PDMS) is mainly caused by the vibrational overtone and combination bands of the CH 3-groups of the polymer in the spectral datacom region of 600-900 nm. Based on observed positions of fundamental, overtone and combination bands of the methyl-group, as recorded within the mid- and near-infrared spectra, anharmonicity constants and normal vibration frequencies were determined. Thus, an empirical equation for estimating the wavelengths with the most significant intrinsic absorption loss due to the corresponding band positions was formulated, which was found to agree well with the experimental data. In addition, PDMS multimode waveguides were fabricated and the respective optical insertion loss was measured at 850 nm, which is commercially used for optical datacom transmission and finally the thermal stability of PDMS multimode waveguides was verified as well.

  11. Spectral interferometric microscopy reveals absorption by individual optical nanoantennas from extinction phase.

    Science.gov (United States)

    Gennaro, Sylvain D; Sonnefraud, Yannick; Verellen, Niels; Van Dorpe, Pol; Moshchalkov, Victor V; Maier, Stefan A; Oulton, Rupert F

    2014-04-30

    Optical antennas transform light from freely propagating waves into highly localized excitations that interact strongly with matter. Unlike their radio frequency counterparts, optical antennas are nanoscopic and high frequency, making amplitude and phase measurements challenging and leaving some information hidden. Here we report a novel spectral interferometric microscopy technique to expose the amplitude and phase response of individual optical antennas across an octave of the visible to near-infrared spectrum. Although it is a far-field technique, we show that knowledge of the extinction phase allows quantitative estimation of nanoantenna absorption, which is a near-field quantity. To verify our method we characterize gold ring-disk dimers exhibiting Fano interference. Our results reveal that Fano interference only cancels a bright mode's scattering, leaving residual extinction dominated by absorption. Spectral interference microscopy has the potential for real-time and single-shot phase and amplitude investigations of isolated quantum and classical antennas with applications across the physical and life sciences.

  12. Edge physics of the quantum spin Hall insulator from a quantum dot excited by optical absorption.

    Science.gov (United States)

    Vasseur, Romain; Moore, Joel E

    2014-04-11

    The gapless edge modes of the quantum spin Hall insulator form a helical liquid in which the direction of motion along the edge is determined by the spin orientation of the electrons. In order to probe the Luttinger liquid physics of these edge states and their interaction with a magnetic (Kondo) impurity, we consider a setup where the helical liquid is tunnel coupled to a semiconductor quantum dot that is excited by optical absorption, thereby inducing an effective quantum quench of the tunneling. At low energy, the absorption spectrum is dominated by a power-law singularity. The corresponding exponent is directly related to the interaction strength (Luttinger parameter) and can be computed exactly using boundary conformal field theory thanks to the unique nature of the quantum spin Hall edge.

  13. Optical absorption in a disk-shaped quantum dot in the presence of an impurity

    Science.gov (United States)

    Mikhail, I. F. I.; Shafee, A. M.

    2017-02-01

    The linear and third order nonlinear optical absorption coefficients have been calculated in a two dimensional disk quantum dot. The confinement potential has been taken to be a combination of a parabolic and inverse squared part. The study has been performed in the presence of a perpendicular static magnetic field and a central or off-central impurity. The resulting Schrödinger equation has been solved by applying the variational method. It has been found that the presence of impurity causes a huge increase in the square of the transition matrix and in the absorption coefficients, in particular in the third order coefficient. Moreover, the asymmetry which results in the case of off-central impurity has been dealt with carefully by taking into consideration the transition matrices which vanish in other cases.

  14. Design of Optical Metamaterial Mirror with Metallic Nanoparticles for Broadband Light Absorption in Graphene Optoelectronic Devices

    CERN Document Server

    Lee, Seungwoo

    2015-01-01

    A general metallic mirror (i.e., a flat metallic surface) has been a popular optical component that can contribute broadband light absorption to thin-film optoelectronic devices; nonetheless, such electric mirror with a reversal of reflection phase inevitably causes the problem of minimized electric field near at the mirror surface (maximized electric field at one quarter of wavelength from mirror). This problem becomes more elucidated, when the deep-subwavelength-scaled two-dimensional (2D) material (e.g., graphene and molybdenum disulfide) is implemented into optoelectronic device as an active channel layer. The purpose of this work was to conceive the idea for using a charge storage layer (spherical Au nanoparticles (AuNPs), embedded into dielectric matrix) of the floating-gate graphene photodetector as a magnetic mirror, which allows the device to harness the increase in broadband light absorption. In particular, we systematically examined whether the versatile assembly of spherical AuNP monolayer within ...

  15. Optical Parameters and Absorption of Azo Dye and Its Metal-Substituted Compound Thin Films

    Institute of Scientific and Technical Information of China (English)

    魏斌; 吴谊群; 顾冬红; 干福熹

    2003-01-01

    We determine the complex refractive indices N ( N = n - ik), dielectric constants ε(ε = ε1 - iε2), and absorption coefficients α of a new azo dye [2-(6-methyl-2-benzothiazolyazo)-5-diethylaminophenol(MBADP)]-doped polymer and its nickel- and zinc-substituted compounds(Ni-MBADP and Zn-MBADP) spin-coated thin films from a scanning ellipsometer in the wavelength 400-700 nm region. Metal chelation strongly (about one times) enhances the optical and dielectric parameters at the peaks and results in a large bathochromic shift (50-60nm) of absorption band. Bathochromic shift of Ni-MBADP is about 10nm larger than that of Zn-MBADP due to different spatial configurations formed in the metal-azo complexes.

  16. Optical Absorption and Electron Injection of 4-(Cyanomethylbenzoic Acid Based Dyes: A DFT Study

    Directory of Open Access Journals (Sweden)

    Yuehua Zhang

    2015-01-01

    Full Text Available Density functional theory (DFT and time-dependent density functional theory (TDDFT calculations were carried out to study the ground state geometries, electronic structures, and absorption spectra of 4-(cyanomethylbenzoic acid based dyes (AG1 and AG2 used for dye-sensitized solar cells (DSSCs. The excited states properties and the thermodynamical parameters of electron injection were studied. The results showed that (a two dyes have uncoplanar structures along the donor unit and conjugated bridge space, (b two sensitizers exhibited intense absorption in the UV-Vis region, and (c the excited state oxidation potential was higher than the conduction band edge of TiO2 photoanode. As a result, a solar cell based on the 4-(cyanomethylbenzoic acid based dyes exhibited well photovoltaic performance. Furthermore, nine dyes were designed on the basis of AG1 and AG2 to improve optical response and electron injection.

  17. Anormalous Optical Absorption in Porous Al_2O3 Host Matrix---Nano-Oxide Particle Nanocomposites

    Science.gov (United States)

    Zhang, Lide; Zhang, Biao; Mo, Chimei

    1996-03-01

    Porous Al_2O3 host matrix---nano-γ-Fe_2O3 particle composites (porous nanocomposite) were prepared by pyrolysis of Fe(NO_3)_39H_2O in porous nano- Al_2O3 matrix at 250^0C. Comparing with simple nanocomposites formed by mixing nano-γ-Fe_2O3 and compacting at room temperature, followed by annealing at 250^0C, the following anomalous optical behaviors were observed: for porous nanocomposite containing 5% Fe_2O_3, the aborption edge shifts obviously from 827nm to 543nm, and with increasing dopping amount of Fe_2O3 from 5% to 70%, blue shift phenomina decreases. Namely, the absorption edge moves from 543nm to 710nm. The mechanism of shift of the absorption edge is discussed.

  18. Enhanced optical absorption by Ag nanoparticles in a thin film Si solar cell

    Institute of Scientific and Technical Information of China (English)

    Chen Feng-Xiang; Wang Li-Sheng; Xu Wen-Ying

    2013-01-01

    Thin film solar cells have the potential to significantly reduce the cost of photovoltaics.Light trapping is crucial to such a thin film silicon solar cell because of a low absorption coefficient due to its indirect band gap.In this paper,we investigate the suitability of surface plasmon resonance Ag nanoparticles for enhancing optical absorption in the thin film solar cell.For evaluating the transmittance capability of Ag nanoparticles and the conventional antireflection film,an enhanced transmittance factor is introduced.We find that under the solar spectrum AM1.5,the transmittance of Ag nanoparticles with radius over 160 nm is equivalent to that of conventional textured antireflection film,and its effect is better than that of the planar antireflection film.The influence of the surrounding medium is also discussed.

  19. Nonlinear optical absorption and stimulated Mie scattering in metallic nanoparticle suspensions

    Science.gov (United States)

    He, Guang S.; Law, Wing-Cheung; Baev, Alexander; Liu, Sha; Swihart, Mark T.; Prasad, Paras N.

    2013-01-01

    The nonlinear optical properties of four metallic (Au-, Au/Ag-, Ag-, and Pt-) nanoparticle suspensions in toluene have been studied in both femtosecond and nanosecond regimes. Nonlinear transmission measurements in the femtosecond laser regime revealed two-photon absorption (2PA) induced nonlinear attenuation, while in the nanosecond laser regime a stronger nonlinear attenuation is due to both 2PA and 2PA-induced excited-state absorption. In the nanosecond regime, at input pump laser intensities above a certain threshold value, a new type of stimulated (Mie) scattering has been observed. Being essentially different from all other well known molecular (Raman, Brillouin) stimulated scattering effects, the newly observed stimulated Mie scattering from the metallic nanoparticles exhibits the features of no frequency shift and low pump threshold requirement. A physical model of induced Bragg grating initiated by the backward Mie scattering from metallic nanoparticles is proposed to explain the gain mechanism of the observed stimulated scattering effect.

  20. Intranight optical variability of radio-loud broad absorption line quasars

    CERN Document Server

    Joshi, Ravi

    2012-01-01

    We present the results of an optical photometric monitoring program of 10 extremely radio loud broad absorption line quasars (RL-BALQSOs) with radio-loudness parameter, R, greater than 100 and magnitude g_i < 19. Over an observing run of about 3.5-6.5 hour we found a clear detection of variability for one of our 10 radio-loud BALQSOs with the INOV duty cycle of 5.1 per cent, while on including the probable variable cases, a higher duty cycle of 35.1 per cent is found; which are very similar to the duty cycle of radio quiet broad absorption line quasars (RQ-BALQSOs). This low duty cycle of clear variability per cent in radio-loud sub-class of BALQSOs can be understood under the premise where BALs outflow may arise from large variety of viewing angles from the jet axis or perhaps being closer to the disc plane.

  1. Effect of radiation-induced color centers absorption in optical fibers on fiber optic gyroscope for space application

    Science.gov (United States)

    Jin, Jing; Li, Ya; Zhang, Zu-Chen; Wu, Chun-Xiao; Song, Ning-Fang

    2016-08-01

    The effects of color centers’ absorption on fibers and interferometric fiber optical gyroscopes (IFOGs) are studied in the paper. The irradiation induced attenuation (RIA) spectra of three types of polarization-maintaining fibers (PMFs), i.e., P-doped, Ge-doped, and pure silica, irradiated at 100 Gy and 1000 Gy are measured in a wavelength range from 1100 nm to 1600 nm and decomposed according to the Gaussian model. The relationship of the color centers absorption intensity with radiation dose is investigated based on a power model. Furthermore, the effects of all color centers’ absorption on RIA and mean wavelength shifts (MWS) at 1300 nm and 1550 nm are discussed respectively. Finally, the random walk coefficient (RWC) degradation induced from RIA and the scale factor error induced by MWS of the IFOG are simulated and tested at a wavelength of 1300 nm. This research will contribute to the applications of the fibers in radiation environments. Project supported by the Scientific Research Foundation for the Returned Overseas Chinese Scholars, State Education Ministry, China.

  2. On the relation of optical obscuration and X-ray absorption in Seyfert galaxies

    CERN Document Server

    Burtscher, L; Gracia-Carpio, J; Koss, M J; Lin, M -Y; Lutz, D; Nandra, P; Netzer, H; de Xivry, G Orban; Ricci, C; Rosario, D J; Veilleux, S; Contursi, A; Genzel, R; Schnorr-Mueller, A; Sternberg, A; Sturm, E; Tacconi, L J

    2016-01-01

    The optical classification of a Seyfert galaxy and whether it is considered X-ray absorbed are often used interchangeably. But there are many borderline cases and also numerous examples where the optical and X-ray classifications appear to be in conflict. In this article we re-visit the relation between optical obscuration and X-ray absorption in AGNs. We make use of our "dust color" method (Burtscher et al. 2015) to derive the optical obscuration A_V and consistently estimated X-ray absorbing columns using 0.3--150 keV spectral energy distributions. We also take into account the variable nature of the neutral gas column N_H and derive the Seyfert sub-classes of all our objects in a consistent way. We show in a sample of 25 local, hard-X-ray detected Seyfert galaxies (log L_X / (erg/s) ~ 41.5 - 43.5) that there can actually be a good agreement between optical and X-ray classification. If Seyfert types 1.8 and 1.9 are considered unobscured, the threshold between X-ray unabsorbed and absorbed should be chosen a...

  3. Kinetics of copper ion absorption by cross-linked calcium polyacrylate membranes

    Science.gov (United States)

    Philipp, W. H.; May, C. E.

    1983-01-01

    The absorption of copper ions from aqueous copper acetate solutions by cross-linked calcium acrylate membranes was found to obey parabolic kinetics similar to that found for oxidation of metals that form protective oxide layers. For pure calcium polyacrylate membranes the rate constant was essentially independent of copper acetate concentration and film thickness. For a cross-linked copolymer film of polyvinyl alcohol and calcium polyacrylate, the rate constant was much greater and dependent on the concentration of copper acetate. The proposed mechanism in each case involves the formation of a copper polyacrylate phase on the surface of the membrane. The diffusion of the copper ion through this phase appears to be the rate controlling step for the copolymer film. The diffusion of the calcium ion is apparently the rate controlling step for the calcium polyacrylate. At low pH, the copper polyacrylate phase consists of the normal copper salt; at higher pH, the phase appears to be the basic copper salt.

  4. Theoretical study relating the two-photon absorption cross section to the susceptibility controlling four-wave mixing

    Science.gov (United States)

    Burris, J.; Mcilrath, T. J.

    1985-01-01

    A theory that it is necessary to extract a two-photon absorption cross section from a mixing signal is developed. The dependence of the cross section on the third-order susceptibility is shown and both the mixing signal and reference signal dependences on the susceptibility are given. Techniques to process the measured value of the susceptibility and relate it to the cross section are developed and limits of validity are established. Finally, a comparison is made between the expression for the cross section presently reported and values given elsewhere.

  5. Probing iron spin state by optical absorption in laser-heated diamond anvil cell

    Science.gov (United States)

    Lobanov, S.; Goncharov, A. F.; Holtgrewe, N.; Lin, J. F.

    2015-12-01

    Pressure-induced spin-pairing transitions in iron-bearing minerals have been in the focus of geophysical studies1. Modern consensus is that iron spin state in the lower mantle is a complex function of crystal structure, composition, pressure, and temperature. Discontinuities in physical properties of lower mantle minerals have been revealed over the spin transition pressure range, but at room temperature. In this work, we have used a supercontinuum laser source and an intensified CCD camera to probe optical properties of siderite, FeCO3, and post-perovskite, Mg0.9Fe0.1SiO3, across the spin transition in laser-heated diamond anvil cell. Synchronously gating the CCD with the supercontinuum pulses (Fig. 1A) allowed diminishing thermal background to ~8.3*10-4. Utilizing the experimental setup we infer the spin state of ferrous iron in siderite at high pressure and temperature conditions (Fig. 1B). Similar behavior is observed for low spin ferric iron in post-perovskite at 130 GPa indicating that all iron in post-perovskite is high spin at lower mantle conditions. Also, our experimental setup holds promise for measuring radiative thermal conductivity of mantle minerals at relevant mantle conditions. Figure 1. (A) Timing of the optical absorption measurements at high temperature. (B) High temperature siderite absorption spectra at 45 GPa. Before heating and quenched after 1300 K spectra are shown in light and dark blue, respectively. Green and red curves are absorption spectra at 1200 K and 1300 K, respectively. Spectra shown in black represent room temperature absorption data on HS (43 GPa) and LS (45.5 GPa) siderite after Lobanov et al., 2015, shown for comparison.

  6. A robust optical parametric oscillator and receiver telescope for differential absorption lidar of greenhouse gases

    Science.gov (United States)

    Robinson, Iain; Jack, James W.; Rae, Cameron F.; Moncrieff, John B.

    2015-10-01

    We report the development of a differential absorption lidar instrument (DIAL) designed and built specifically for the measurement of anthropogenic greenhouse gases in the atmosphere. The DIAL is integrated into a commercial astronomical telescope to provide high-quality receiver optics and enable automated scanning for three-dimensional lidar acquisition. The instrument is portable and can be set up within a few hours in the field. The laser source is a pulsed optical parametric oscillator (OPO) which outputs light at a wavelength tunable near 1.6 μm. This wavelength region, which is also used in telecommunications devices, provides access to absorption lines in both carbon dioxide at 1573 nm and methane at 1646 nm. To achieve the critical temperature stability required for a laserbased field instrument the four-mirror OPO cavity is machined from a single aluminium block. A piezoactuator adjusts the cavity length to achieve resonance and this is maintained over temperature changes through the use of a feedback loop. The laser output is continuously monitored with pyroelectric detectors and a custom-built wavemeter. The OPO is injection seeded by a temperature-stabilized distributed feedback laser diode (DFB-LD) with a wavelength locked to the absorption line centre (on-line) using a gas cell containing pure carbon dioxide. A second DFB-LD is tuned to a nearby wavelength (off-line) to provide the reference required for differential absorption measurements. A similar system has been designed and built to provide the injection seeding wavelengths for methane. The system integrates the DFB-LDs, drivers, locking electronics, gas cell and balanced photodetectors. The results of test measurements of carbon dioxide are presented and the development of the system is discussed, including the adaptation required for the measurement of methane.

  7. Enhanced nonlinear optical absorption and optical limiting properties of superparamagnetic spinel zinc ferrite decorated reduced graphene oxide nanostructures

    Science.gov (United States)

    Saravanan, M.; T. C., Sabari Girisun

    2017-01-01

    Nonlinear absorption and optical limiting properties of ZnFe2O4-rGO magnetic nanostructures was investigated by the Z-scan technique using Q-switched Nd:YAG laser (5 ns, 532 nm, 10 Hz) as an excitation source. Excited state absorption was the dominant process responsible for the observed nonlinearity in ZnFe2O4 decorated rGO which arises due to photo-generated charge carriers in the conduction band of zinc ferrite and increases in defects at the surface of rGO due to the incorporation of ZnFe2O4. The magnitude of the nonlinear absorption co-efficient was found to be in the order of 10-10 m/W. A noteworthy enhancement in the third-order NLO properties in ZnFe2O4-(15 wt%) rGO with those of individual counter parts and well known graphene composites was reported. Role of induced defects states (sp3) arising from the functionalization of rGO in the enhancement of NLO response was explained through Raman studies. Earlier incorporation and distribution of ZnFe2O4 upon GO through one-step hydrothermal method was analyzed by XRD and FTIR. Formation of (nanospheres/nanospindles) ZnFe2O4 along with reduction of graphene oxide was confirmed through TEM analysis. VSM studies showed zinc ferrite decorated rGO posseses superparamagnetic behavior. The tuning of nonlinear optical and magnetic behavior with variation in the content of spinel ferrites upon reduced graphene oxide provides an easy way to attain tunable properties which are exceedingly required in both optoelectronics and photothermal therapy applications.

  8. Optical absorption of CdSe quantum dots on electrodes with different morphology

    Directory of Open Access Journals (Sweden)

    Witoon Yindeesuk

    2013-10-01

    Full Text Available We have studied the optical absorption of CdSe quantum dots (QDs adsorbed on inverse opal TiO2 (IO-TiO2 and nanoparticulate TiO2 (NP-TiO2 electrodes using photoacoustic (PA measurements. The CdSe QDs were grown directly on IO-TiO2 and NP-TiO2 electrodes by a successive ionic layer adsorption and reaction (SILAR method with different numbers of cycles. The average diameter of the QDs was estimated by applying an effective mass approximation to the PA spectra. The increasing size of the QDs with increasing number of cycles was confirmed by a redshift in the optical absorption spectrum. The average diameter of the CdSe QDs on the IO-TiO2 electrodes was similar to that on the NP-TiO2 ones, indicating that growth is independent of morphology. However, there were more CdSe QDs on the NP-TiO2 electrodes than on the IO-TiO2 ones, indicating that there were different amounts of active sites on each type of electrode. In addition, the Urbach parameter of the exponential optical absorption tail was also estimated from the PA spectrum. The Urbach parameter of CdSe QDs on IO-TiO2 electrodes was higher than that on NP-TiO2 ones, indicating that CdSe QDs on IO-TiO2 electrodes are more disordered states than those on NP-TiO2 electrodes. The Urbach parameter decreases in both cases with the increase of SILAR cycles, and it tended to move toward a constant value.

  9. Sign reversal of Hanle electromagnetically induced absorption with orthogonal circularly polarized optical fields

    Energy Technology Data Exchange (ETDEWEB)

    Ram, Nibedita; Pattabiraman, M, E-mail: pattu@physics.iitm.ac.i [Department of Physics, Indian Institute of Technology Madras, Chennai 600036 (India)

    2010-12-28

    We study by computation and experiment an electromagnetically induced absorption resonance in the Hanle configuration with a transverse magnetic field on a closed F{sub g} {yields} F{sub e} = F{sub g}+1 transition with co-propagating orthogonal circularly polarized probe and coupling optical fields. At high coupling field intensities, the Hanle resonance changes sign due to a shift in atomic population from Zeeman sublevels associated with a probe field cyclic transition to sublevels associated with a coupling field cyclic transition at zero magnetic field. We also show that a similar sign reversal does not occur for {pi}-polarized and {sigma}-polarized coupling fields.

  10. A structure preserving Lanczos algorithm for computing the optical absorption spectrum

    CERN Document Server

    Shao, Meiyue; Lin, Lin; Yang, Chao; Deslippe, Jack; Louie, Steven G

    2016-01-01

    We present a new structure preserving Lanczos algorithm for approximating the optical absorption spectrum in the context of solving full Bethe--Salpeter equation without Tamm--Dancoff approximation. The new algorithm is based on a structure preserving Lanczos procedure, which exploits the special block structure of Bethe--Salpeter Hamiltonian matrices. A recently developed technique of generalized averaged Gauss quadrature is incorporated to accelerate the convergence. We also establish the connection between our structure preserving Lanczos procedure with several existing Lanczos procedures developed in different contexts. Numerical examples are presented to demonstrate the effectiveness of our Lanczos algorithm.

  11. A relation between electromagnetically induced absorption resonances and nonlinear magneto-optics in Lambda-systems

    CERN Document Server

    Budker, D

    2003-01-01

    Recent work on Lambda-resonances in alkali metal vapors (E. Mikhailov, I. Novikova, Yu. V. Rostovtsev, and G. R. Welch, quant-ph/0309171, and references therein) has revealed a novel type of electromagnetically induced absorption resonance that occurs in three-level systems under specific conditions normally associated with electromagnetically induced transparency. In this note, we show that these resonances have a direct analog in nonlinear magneto-optics, and support this conclusion with a calculation for a J=1->J'=0 system interacting with a single nearly circularly polarized light field in the presence of a weak longitudinal magnetic field.

  12. ESR and optical absorption studies of gamma- and electron-irradiated sugar crystals

    Energy Technology Data Exchange (ETDEWEB)

    Flores, J.C.; Cabrera, B.E.; Calderon, T.; Munoz, P.E.; Adem, E.; Hernandez, A.J.; Boldu, J.L.; Ovalle M.P.; Murrieta, S.H. E-mail: murrieta@fenix.ifisicacu.unam.mx

    2000-05-15

    Electron spin resonance (ESR) studies of the free radicals induced in gamma- or electron-irradiated sugar crystals were performed. The number of radicals increases linearly, pointing out that this material can be used as a dosimeter. The optical absorption studies show the presence of several distinctive bands in the infrared and UV region, whose intensity changes with the irradiation dose. An interpretation of these results in terms of the formation of free radicals and possible crosslinking along the sugar molecular chains is presented.

  13. The high temperature photoluminescence and optical absorption of undoped ZnO single crystals and thin films

    Energy Technology Data Exchange (ETDEWEB)

    Margueron, Samuel [School of Engineering and Applied Sciences, Harvard University, Cambridge, Massachusetts 02138 (United States); Laboratoire Matériaux Optiques, Photonique et Systèmes, Université de Lorraine, F-57070 Metz Cedex (France); Clarke, David R. [School of Engineering and Applied Sciences, Harvard University, Cambridge, Massachusetts 02138 (United States)

    2014-11-21

    The photoluminescence of undoped ZnO single crystals up to 1350 °C and the optical absorption of stress-relaxed, epitaxial ZnO thin films up to 1100 °C are reported. The photoluminescence intensity and power dependence with illumination flux are related to the crystal growth methods and stabilize after high temperature annealing. The observation of excitonic recombination at very high temperatures requires high illumination flux. It is found that the zero phonon line model reproduces the shift and the band gap narrowing as well as the free excitonic transition up to the cross-over with a defect level at 2.83 eV that occurs at 800 °C. A phenomenological model of the excitonic recombination band shape, taking account exciton-phonon losses and defect levels provides an excellent fit up to 2.2–2.4 eV (1100 °C). At these cross-over temperatures, an energy transfer is observed between the free exciton transition and defect transitions. However, at temperature above 1100 °C, the decrease of the band gap and the increase of thermal radiation, as well as the restrictions of our experimental set-up and particularly the illumination flux of the exciting laser, limit the analysis of the photoluminescence spectra measurements.

  14. EPR and optical absorption studies of Cr3+ ions in d-gluconic acid monohydrate.

    Science.gov (United States)

    Kripal, Ram; Singh, Pragya; Govind, Har

    2009-10-01

    EPR studies are carried out on Cr(3+) ions doped in d-gluconic acid monohydrate (C(6)H(12)O(7)*H(2)O) single crystals at 77 K. From the observed EPR spectra, the spin Hamiltonian parameters g, |D| and |E| are measured to be 1.9919, 349 (x 10(-4)) cm(-1) and 113 (x 10(-4)) cm(-1), respectively. The optical absorption of the crystal is also studied at room temperature. From the observed band positions, the cubic crystal field splitting parameter Dq (2052 cm(-1)) and the Racah interelectronic repulsion parameter B (653 cm(-1)) are evaluated. From the correlation of EPR and optical data the nature of bonding of Cr(3+) ion with its ligands is discussed.

  15. Bound states in optical absorption of semiconductor quantum wells containing a two-dimensional electron Gas

    Science.gov (United States)

    Huard; Cox; Saminadayar; Arnoult; Tatarenko

    2000-01-01

    The dependence of the optical absorption spectrum of a semiconductor quantum well on two-dimensional electron concentration n(e) is studied using CdTe samples. The trion peak (X-) seen at low n(e) evolves smoothly into the Fermi edge singularity at high n(e). The exciton peak (X) moves off to high energy, weakens, and disappears. The X,X- splitting is linear in n(e) and closely equal to the Fermi energy plus the trion binding energy. For Cd0.998Mn0.002Te quantum wells in a magnetic field, the X,X- splitting reflects unequal Fermi energies for M = +/-1/2 electrons. The data are explained by Hawrylak's theory of the many-body optical response including spin effects.

  16. Plasmon enhanced broadband optical absorption in ultrathin silicon nanobowl array for photoactive devices applications

    Science.gov (United States)

    Sun, Rui-Nan; Peng, Kui-Qing; Hu, Bo; Hu, Ya; Zhang, Fu-Qiang; Lee, Shuit-Tong

    2015-07-01

    Both photonic and plasmonic nanostructures are key optical components of photoactive devices for light harvesting, enabling solar cells with significant thickness reduction, and light detectors capable of detecting photons with sub-band gap energies. In this work, we study the plasmon enhanced broadband light absorption and electrical properties of silicon nanobowl (SiNB) arrays. The SiNB-metal photonic-plasmonic nanostructure-based devices exhibited superior light-harvesting ability across a wide range of wavelengths up to the infrared regime well below the band edge of Si due to effective optical coupling between the SiNB array and incident sunlight, as well as electric field intensity enhancement around metal nanoparticles due to localized surface plasmon resonance. The photonic-plasmonic nanostructure is expected to result in infrared-light detectors and high-efficiency solar cells by extending light-harvesting to infrared frequencies.

  17. Structural control of nonlinear optical absorption and refraction in dense metal nanoparticle arrays.

    Science.gov (United States)

    Kohlgraf-Owens, Dana C; Kik, Pieter G

    2009-08-17

    The linear and nonlinear optical properties of a composite containing interacting spherical silver nanoparticles embedded in a dielectric host are studied as a function of interparticle separation using three dimensional frequency domain simulations. It is shown that for a fixed amount of metal, the effective third-order nonlinear susceptibility of the composite chi((3))(omega) can be significantly enhanced with respect to the linear optical properties, due to a combination of resonant surface plasmon excitation and local field redistribution. It is shown that this geometry-dependent susceptibility enhancement can lead to an improved figure of merit for nonlinear absorption. Enhancement factors for the nonlinear susceptibility of the composite are calculated, and the complex nature of the enhancement factors is discussed.

  18. Plasmonic excitation-assisted optical and electric enhancement in ultra-thin solar cells: the influence of nano-strip cross section

    Energy Technology Data Exchange (ETDEWEB)

    Sabaeian, Mohammad, E-mail: sabaiean@scu.ac.ir; Heydari, Mehdi; Ajamgard, Narges [Physics Department, Faculty of Science, Shahid Chamran University of Ahvaz, Ahvaz, 61357-43135 (Iran, Islamic Republic of)

    2015-08-15

    The effects of Ag nano-strips with triangle, rectangular and trapezoid cross sections on the optical absorption, generation rate, and short-circuit current density of ultra-thin solar cells were investigated. By putting the nano-strips as a grating structure on the top of the solar cells, the waveguide, surface plasmon polariton (SPP), and localized surface plasmon (LSP) modes, which are excited with the assistance of nano-strips, were evaluated in TE and TM polarizations. The results show, firstly, the TM modes are more influential than TE modes in optical and electrical properties enhancement of solar cell, because of plasmonic excitations in TM mode. Secondly, the trapezoid nano-strips reveal noticeable impact on the optical absorption, generation rate, and short-circuit current density enhancement than triangle and rectangular ones. In particular, the absorption of long wavelengths which is a challenge in ultra-thin solar cells is significantly improved by using Ag trapezoid nano-strips.

  19. Fully reconfigurable 2x2 optical cross-connect using tunable wavelength switching modules

    DEFF Research Database (Denmark)

    Liu, Fenghai; Zheng, Xueyan; Pedersen, Rune Johan Skullerud;

    2001-01-01

    A modular tunable wavelength switching module is proposed and used to construct 2x2 fully reconfigurable optical cross-connects. Large size optical switch is avoided in the OXC and it is easy to upgrade to more wavelength channels.......A modular tunable wavelength switching module is proposed and used to construct 2x2 fully reconfigurable optical cross-connects. Large size optical switch is avoided in the OXC and it is easy to upgrade to more wavelength channels....

  20. An ultra-fast optical shutter exploiting total light absorption in a phase change material

    Science.gov (United States)

    Jafari, Mohsen; Guo, L. Jay; Rais-Zadeh, Mina

    2017-02-01

    In this paper, we present an ultra-fast and high-contrast optical shutter with applications in atomic clock assemblies, integrated photonic systems, communication hardware, etc. The shutter design exploits the total light absorption phenomenon in a thin phase change (PC) material placed over a metal layer. The shutter switches between ON and OFF states by changing PC material phase and thus its refractive index. The PC material used in this work is Germanium Telluride (GeTe), a group IV-VI chalcogenide compound, which exhibits good optical contrast when switching from amorphous to crystalline state and vice versa. The stable phase changing behavior and reliability of GeTe and GeSbTe (GST) have been verified in optical memories and RF switches. Here, GeTe is used as it has a lower extinction coefficient in near-IR regions compared to GST. GeTe can be thermally transitioned between two phases by applying electrical pulses to an integrated heater. The memory behavior of GeTe results in zero static power consumption which is useful in applications requiring long time periods between switching activities. We previously demonstrated a meta-surface employing GeTe in sub-wavelength slits with >14 dB isolation at 1.5 μm by exciting the surface plasmon polariton and localized slit resonances. In this work, strong interference effects in a thin layer of GeTe over a gold mirror result in near total light absorption of up to 40 dB (21 dB measured) in the amorphous phase of the shutter at 780 nm with much less fabrication complexity. The optical loss at the shutter ON state is less than 1.5 dB. A nickel chrome (NiCr) heater provides the Joule heating energy required to achieve the crystallographic phase change. The measured switching speed is 2 μs.

  1. First-principles calculation of optical absorption spectra in conjugated polymers: Role of electron-hole interaction

    Energy Technology Data Exchange (ETDEWEB)

    Rohlfing, Michael; Tiago, M.L.; Louie, Steven G.

    2000-03-20

    Experimental and theoretical studies have shown that excitonic effects play an important role in the optical properties of conjugated polymers. The optical absorption spectrum of trans-polyacetylene, for example, can be understood as completely dominated by the formation of exciton bound states. We review a recently developed first-principles method for computing the excitonic effects and optical spectrum, with no adjustable parameters. This theory is used to study the absorption spectrum of two conjugated polymers: trans-polyacetylene and poly-phenylene-vinylene(PPV).

  2. Stack emission monitoring using non-dispersive infrared spectroscopy with an optimized nonlinear absorption cross interference correction algorithm

    Directory of Open Access Journals (Sweden)

    Y. W. Sun

    2013-08-01

    Full Text Available In this paper, we present an optimized analysis algorithm for non-dispersive infrared (NDIR to in situ monitor stack emissions. The proposed algorithm simultaneously compensates for nonlinear absorption and cross interference among different gases. We present a mathematical derivation for the measurement error caused by variations in interference coefficients when nonlinear absorption occurs. The proposed algorithm is derived from a classical one and uses interference functions to quantify cross interference. The interference functions vary proportionally with the nonlinear absorption. Thus, interference coefficients among different gases can be modeled by the interference functions whether gases are characterized by linear or nonlinear absorption. In this study, the simultaneous analysis of two components (CO2 and CO serves as an example for the validation of the proposed algorithm. The interference functions in this case can be obtained by least-squares fitting with third-order polynomials. Experiments show that the results of cross interference correction are improved significantly by utilizing the fitted interference functions when nonlinear absorptions occur. The dynamic measurement ranges of CO2 and CO are improved by about a factor of 1.8 and 3.5, respectively. A commercial analyzer with high accuracy was used to validate the CO and CO2 measurements derived from the NDIR analyzer prototype in which the new algorithm was embedded. The comparison of the two analyzers show that the prototype works well both within the linear and nonlinear ranges.

  3. Optically enhanced nuclear cross polarization in acridine-doped fluorene

    Energy Technology Data Exchange (ETDEWEB)

    Oshiro, C.M.

    1982-06-01

    The objective of this work has been to create large polarizations of the dilute /sup 13/C nuclei in the solid state. The idea was to create /sup 1/H polarizations larger than Boltzmann and to use the proton enhanced nuclear induction spectroscopy cross polarization technique to then transfer this large polarization to the /sup 13/C spin system. Optical Nuclear Polarization (ONP) of acridine-doped fluorene single crystals was studied. In addition, ONP of powdered samples of the acridine-doped fluorene was studied. In general, many compounds do not crystallize easily or do not form large crystals suitable for NMR experiments. Powdered, amorphous and randomly dispersed samples are generally far more readily available than single crystals. One objective of this work has been to (first) create large /sup 1/H polarizations. Although large optical proton polarizations in single crystals have been reported previously, optically generated polarizations in powdered samples have not been reported. For these reasons, ONP studies of powdered samples of the acridine-doped fluorene were also undertaken. Using ONP in combination with the proton enhanced nuclear induction spectroscopy experiment, large /sup 13/C polarizations have been created in fluorene single crystals. These large /sup 13/C polarizations have permitted the determination of the seven incongruent chemical shielding tensors of the fluorene molecule. Part 2 of this thesis describes the proton enhanced nuclear induction spectroscopy experiment. Part 3 describes the ONP experiment. Part 4 is a description of the experimental set-up. Part 5 describes the data analysis for the determination of the chemical shielding tensors. Part 6 presents the results of the ONP experiments performed in this work and the chemical shielding tensors determined.

  4. Domain-dependent electronic structure and optical absorption property in hybrid organic-inorganic perovskite.

    Science.gov (United States)

    Meng, Xiang; Zhang, Ruifeng; Fu, Zhongheng; Zhang, Qianfan

    2016-10-05

    Hybrid organic-inorganic perovskites, represented by materials in the CH3NH3PbI3 series, have become one of the most promising materials for solar cells with a high power conversion efficiency and low cost. The ordered Pb-I cage in such hybrid perovskites can induce the polarized cations to form a variety of polarization domains with long-range order, which will lead to the formation of specific atomic conformations or metastable crystalline phases, unique electronic band structures and optical absorption properties. Such domain-dependent characteristics play a critical role in the phase transition and service stability of such solar cells, and also open up the opportunity of tuning their electronic structure. In the present study, we systematically investigate the band structures and optical absorption properties of different electronically ordered domains in CH3NH3PbI3. By comparing different perovskites containing various cations, we have clarified the important influence of cation polarization on domain-dependent properties. Our results provide not only a possible pathway for the manipulation of band structure by applying an external field, but also a novel scheme for improving the performance and stability of hybrid perovskites.

  5. EPR and optical absorption study of Cu{sup 2+}-doped lithium potassium sulphate single crystals

    Energy Technology Data Exchange (ETDEWEB)

    Kripal, Ram [EPR Laboratory, Department of Physics, University of Allahabad, Allahabad 211002 (India)], E-mail: ram_kripal2001@rediffmail.com; Bajpai, Manisha [EPR Laboratory, Department of Physics, University of Allahabad, Allahabad 211002 (India)], E-mail: bmanisha15@yahoo.co.in; Maurya, Manju [EPR Laboratory, Department of Physics, University of Allahabad, Allahabad 211002 (India); Govind, Har [Department of Electronics, Ewing Christian College, Allahabad (India)

    2008-10-01

    EPR spectra of Cu{sup 2+} ion doped in lithium potassium sulphate single crystal at room temperature are reported. The observed spectra are fitted to a spin Hamiltonian of orthorhombic symmetry with Cu{sup 2+} (site I) g{sub x}=2.0930, g{sub y}=2.1421, g{sub z}=2.2900 ({+-}0.0002) and A{sub x}=85, A{sub y}=89, A{sub z}=184 ({+-}2x10{sup -4} cm{sup -1}); Cu{sup 2+} (site II) g{sub x}=2.0795, g{sub y}=2.1580, g{sub z}=2.2876 ({+-}0.0002) and A{sub x}=93, A{sub y}=95, A{sub z}=189 ({+-}2x10{sup -4} cm{sup -1}); respective errors given in brackets. Copper enters the lattice substitutionally and is trapped at two magnetically inequivalent sites. The ground state wave function of the Cu{sup 2+} ion in this lattice is determined as predominantly |x{sup 2}-y{sup 2}>. The g-factor anisotropy is calculated and compared with the experimental value. The optical absorption of the crystal at room temperature is also recorded. Further, with the help of the optical absorption and EPR data, the nature of bonding in the complex is discussed.

  6. EPR and optical absorption studies of vanadyl ions in potassium oxalate monohydrate

    Energy Technology Data Exchange (ETDEWEB)

    Kripal, Ram [Department of Physics, University of Allahabad, Allahabad 211002 (India)]. E-mail: ram_kripal2001@rediffmail.com; Maurya, Manju [Department of Physics, University of Allahabad, Allahabad 211002 (India)]. E-mail: mmanju8@yahoo.co.in; Govind, Har [Department of Electronics, Ewing Christian College, Allahabad 211003 (India)

    2007-04-15

    Electron paramagnetic resonance (EPR) studies are reported on vanadyl (VO{sup 2+}) ions in potassium oxalate monohydrate (POM) single crystals at room temperature. The results indicate that the paramagnetic impurity takes up an interstitial site in the lattice. The angular variation of EPR spectra in three mutually perpendicular planes are used to determine the spin Hamiltonian parameters and the values obtained are: g{sub x} =2.0153{+-}0.0002, g{sub y} =1.9489{+-}0.0002, g{sub z} =1.9155{+-}0.0002 and A{sub x} =(63{+-}2)x10{sup -4} cm{sup -1}, A{sub y} =(92{+-}2)x10{sup -4} cm{sup -1}, A{sub z} =(193{+-}2)x10{sup -4} cm{sup -1}. The optical absorption spectrum of VO{sup 2+} ions in the crystal lattice is also studied at room temperature. The characteristic spectrum of the VO{sup 2+} ions has four absorption bands. The band positions are calculated using the energy expressions and compared with the observed values to confirm the transitions. The analysis of the spectrum indicates that the first three bands correspond to d-d transitions and the last band is probably charge transfer band. Crystal field parameter (Dq) and tetragonal parameters (Ds and Dt) are also evaluated. From optical and EPR data various bonding parameters are obtained and nature of bonding in the crystal is discussed.

  7. Functionally graded poly(dimethylsiloxane)/silver nanocomposites with tailored broadband optical absorption

    Energy Technology Data Exchange (ETDEWEB)

    Nikolaou, P.; Mina, C.; Constantinou, M.; Koutsokeras, L.E.; Constantinides, G. [Research Unit for Nanostructured Materials Systems, Department of Mechanical Engineering and Materials Science and Engineering, PO Box 50329, 3603 Limassol (Cyprus); Lidorikis, E.; Avgeropoulos, A. [Department of Materials Science and Engineering, University of Ioannina, 45110 Ioannina (Greece); Kelires, P.C. [Research Unit for Nanostructured Materials Systems, Department of Mechanical Engineering and Materials Science and Engineering, PO Box 50329, 3603 Limassol (Cyprus); Patsalas, P., E-mail: ppats@physics.auth.gr [Physics Department, Aristotle University of Thessaloniki, Thessaloniki 54124 (Greece)

    2015-04-30

    In this work, we produce functionally graded nanocomposites consisting of silver (Ag) plasmonic nanoparticles (PNPs) supported in a poly(dimethylsiloxane) (PDMS) matrix. PDMS was selected due to its high optical transparency, nontoxicity and ease of use. The Ag PNPs were formed by annealing sputtered Ag ultra-thin films and were subsequently capped by a spin-coated PDMS layer. We investigate the factors that affect their plasmonic behavior, such as the PNP size, the annealing conditions and the surrounding environment. In order to achieve broadband absorption, we developed PDMS/Ag(PNPs) multilayers with graded PNP size. Thus, we demonstrate the significance of the stacking sequence of various plasmonic layers sandwiched between PDMS layers and its potential for tailoring the plasmonic response of multilayer structure. As a demonstration of this approach, we deposited a specially designed multilayer structure, whose optical extinction resembles the solar emission spectrum. - Highlights: • Elastomers are combined with plasmonic nanoparticles. • The plasmonic effects in stratified media are identified. • Broadband absorption similar to solar emission is achieved.

  8. Synthesis, XRD, TEM, EPR, and Optical Absorption Spectral Studies of CuZnO2 Nanocompound

    Directory of Open Access Journals (Sweden)

    T. Ravindra Reddy

    2014-01-01

    Full Text Available Synthesis of nano CuZnO2 compound is carried out by thermal decomposition method. The crystalline phase of the material is characterized by XRD. The calculated unit cell constants are a=3.1 Å and c=3.4786 Å and are of tetragonal structure. The unit cell constants are different from wurtzite (hexagonal which indicate that a nanocompound is formed. Further TEM images reveal that the metal ion is in tetragonal structure with oxygen ligands. The prepared CuZnO2 is then characterized for crystallite size analysis by employing transmission electron microscopy (TEM. The size is found to be 100 nm. Uniform bright rings are noticed in the TEM picture suggesting that the nanocrystals have preferential instead of random orientations. The selected-area electron diffraction (SAED pattern clearly indicates the formation of CuO-ZnO nanocompound. The nature of bonding is studied by electron paramagnetic resonance (EPR. The covalency character is about 0.74 and thus the compound is electrically less conductive. Optical absorption spectral studies suggest that Cu(II is placed in tetragonal elongation crystal field. The spin-orbit coupling constant, λ, is calculated using the EPR and optical absorption spectral results suggest some covalent bond between metal and ligand. Near infrared (NIR spectra are due to hydroxyl and water fundamentals.

  9. Optical properties and cross-sections of biological aerosols

    Science.gov (United States)

    Thrush, E.; Brown, D. M.; Salciccioli, N.; Gomes, J.; Brown, A.; Siegrist, K.; Thomas, M. E.; Boggs, N. T.; Carter, C. C.

    2010-04-01

    There is an urgent need to develop standoff sensing of biological agents in aerosolized clouds. In support of the Joint Biological Standoff Detection System (JBSDS) program, lidar systems have been a dominant technology and have shown significant capability in field tests conducted in the Joint Ambient Breeze Tunnel (JABT) at Dugway Proving Ground (DPG). The release of biological agents in the open air is forbidden. Therefore, indirect methods must be developed to determine agent cross-sections in order to validate sensor against biological agents. A method has been developed that begins with laboratory measurements of thin films and liquid suspensions of biological material to obtain the complex index of refraction from the ultraviolet (UV) to the long wave infrared (LWIR). Using that result and the aerosols' particle size distribution as inputs to Mie calculations yields the backscatter and extinction cross-sections as a function of wavelength. Recent efforts to model field measurements from the UV to the IR have been successful. Measurements with aerodynamic and geometric particle sizers show evidence of particle clustering. Backscatter simulations of these aerosols show these clustered particles dominate the aerosol backscatter and depolarization signals. In addition, these large particles create spectral signatures in the backscatter signal due to material absorption. Spectral signatures from the UV to the IR have been observed in simulations of field releases. This method has been demonstrated for a variety of biological simulant materials such as Ovalbumin (OV), Erwinia (EH), Bacillus atrophaeus (BG) and male specific bacteriophage (MS2). These spectral signatures may offer new methods for biological discrimination for both stand-off sensing and point detection systems.

  10. Optical Absorption and Photo-Thermal Conversion Properties of CuO/H2O Nanofluids.

    Science.gov (United States)

    Wang, Liangang; Wu, Mingyan; Wu, Daxiong; Zhang, Canying; Zhu, Qunzhi; Zhu, Haitao

    2015-04-01

    Stable CuO/H2O nanofluids were synthesized in a wet chemical method. Optical absorption property of CuO/H2O nanofluids was investigated with hemispheric transmission spectrum in the wavelength range from 200 nm to 2500 nm. Photo-thermal conversion property of the CuO/H2O nanofluids was studied with an evaluation system equipped with an AUT-FSL semiconductor/solid state laser. The results indicate that CuO/H2O nanofluids have strong absorption in visible light region where water has little absorption. Under the irradiation of laser beam with a wavelength of 635 nm and a power of 0.015 W, the temperature of CuO/H2O nanofluids with 1.0% mass fraction increased by 5.6 °C within 40 seconds. Furthermore, the temperature elevation of CuO/H2O nanofluids was proved to increase with increasing mass fractions. On the contrast, water showed little temperature elevation under the identical conditions. The present work shows that the CuO/H2O nanofluids have high potential in the application as working fluids for solar utilization purpose.

  11. Reduced mass absorption cross section of black carbon under an extremely polluted condition in southern suburb of Beijing, China

    Science.gov (United States)

    Wang, J.; Wang, S.; Hua, Y.; Jiang, J.; Zhao, B.; Xing, J.; Jiang, S.; Cai, R.; Hao, J.

    2015-12-01

    Black carbon (BC), as one of the most important climate-warming agent, has been the focus of extensive studies in recent years. Mass absorption cross section (MAC) is a key parameter to assess the radiative forcing by linking the mass concentration with the radiation effect. In this study, we conducted a two-month field campaign in Beijing, the capital city of China, in a October and November, a period that severe PM2.5 pollution occurred. PM2.5 offline samples were collected daily onto quartz fiber filters by a Partisol 2300 Speciation Sampler. Size-segregated aerosol samples of the size ranged from 0.056 - 10 µm with 11 bins were collected onto quartz fiber filters by a cascade impactor developed by National Chiao Tung University (NCTU). A DRI Model 2001 thermal/optical carbon analyzer were used to analyze the samples. The MAC of BC is measured by a thermal-optical carbon analyzer. In contrast to previous studies, we found that after "shadow effect" has been corrected, the MAC is reduced from 14 m2/g to 5 m2/g with the increase of BC concentrations. There was no significant correlation between MAC with secondary inorganic aerosols. Such unexpected reduction in MAC of BC is possibly associated with the microphysical property of BC modulated under serious pollution condition. The study of size-segregated species concentrations shows that the size distribution of BC is unimodal, with the peak around 0.56-1.8 µm. The results also show the proportion of BC larger than 0.56 µm is significant increased. Additionally, "soot superaggregate", as distinct from conventional sub-micron aggregates, was found in the bins of BC with size ranged from 1 to1.8 µm. Such high carbon aerosol proportion and large BC size distribution suggests that emissions from residential biomass burning is dominant during this episode. This study suggests that the optical property for BC from different emission sectors should be considered in the estimation of radiative forcing.

  12. Sedimentation field flow fractionation and optical absorption spectroscopy for a quantitative size characterization of silver nanoparticles.

    Science.gov (United States)

    Contado, Catia; Argazzi, Roberto; Amendola, Vincenzo

    2016-11-04

    Many advanced industrial and biomedical applications that use silver nanoparticles (AgNPs), require that particles are not only nano-sized, but also well dispersed, not aggregated and not agglomerated. This study presents two methods able to give rapidly sizes of monodispersed AgNPs suspensions in the dimensional range of 20-100nm. The first method, based on the application of Mie's theory, determines the particle sizes from the values of the surface plasmon resonance wavelength (SPRMAX), read from the optical absorption spectra, recorded between 190nm and 800nm. The computed sizes were compared with those determined by transmission electron microscopy (TEM) and dynamic light scattering (DLS) and resulted in agreement with the nominal values in a range between 13% (for 20nm NPs) and 1% (for 100nm NPs), The second method is based on the masterly combination of the Sedimentation Field Flow Fractionation (SdFFF - now sold as Centrifugal FFF-CFFF) and the Optical Absorption Spectroscopy (OAS) techniques to accomplish sizes and quantitative particle size distributions for monodispersed, non-aggregated AgNPs suspensions. The SdFFF separation abilities, well exploited to size NPs, greatly benefits from the application of Mie's theory to the UV-vis signal elaboration, producing quantitative mass-based particle size distributions, from which trusted number-sized particle size distributions can be derived. The silver mass distributions were verified and supported by detecting off-line the Ag concentration with the graphite furnace atomic absorption spectrometry (GF-AAS). Copyright © 2016 Elsevier B.V. All rights reserved.

  13. Vacuum-UV spectroscopy of interstellar ice analogs. II. Absorption cross-sections of nonpolar ice molecules

    Science.gov (United States)

    Cruz-Diaz, G. A.; Muñoz Caro, G. M.; Chen, Y.-J.; Yih, T.-S.

    2014-02-01

    Context. Dust grains in cold circumstellar regions and dark-cloud interiors at 10-20 K are covered by ice mantles. A nonthermal desorption mechanism is invoked to explain the presence of gas-phase molecules in these environments, such as the photodesorption induced by irradiation of ice due to secondary ultraviolet photons. To quantify the effects of ice photoprocessing, an estimate of the photon absorption in ice mantles is required. In a recent work, we reported the vacuum-ultraviolet (VUV) absorption cross sections of nonpolar molecules in the solid phase. Aims: The aim was to estimate the VUV-absorption cross sections of nonpolar molecular ice components, including CH4, CO2, N2, and O2. Methods: The column densities of the ice samples deposited at 8 K were measured in situ by infrared spectroscopy in transmittance. VUV spectra of the ice samples were collected in the 120-160 nm (10.33-7.74 eV) range using a commercial microwave-discharged hydrogen flow lamp. Results: We found that, as expected, solid N2 has the lowest VUV-absorption cross section, which about three orders of magnitude lower than that of other species such as O2, which is also homonuclear. Methane (CH4) ice presents a high absorption near Ly-α (121.6 nm) and does not absorb below 148 nm. Estimating the ice absorption cross sections is essential for models of ice photoprocessing and allows estimating the ice photodesorption rates as the number of photodesorbed molecules per absorbed photon in the ice. Data can be found at http://ghosst.osug.fr/

  14. Calculation of optical and K pre-edge absorption spectra for ferrous iron of distorted sites in oxide crystals

    Science.gov (United States)

    Vercamer, Vincent; Hunault, Myrtille O. J. Y.; Lelong, Gérald; Haverkort, Maurits W.; Calas, Georges; Arai, Yusuke; Hijiya, Hiroyuki; Paulatto, Lorenzo; Brouder, Christian; Arrio, Marie-Anne; Juhin, Amélie

    2016-12-01

    Advanced semiempirical calculations have been performed to compute simultaneously optical absorption and K pre-edge x-ray absorption spectra of Fe2 + in four distinct site symmetries found in minerals. The four symmetries, i.e., a distorted octahedron, a distorted tetrahedron, a square planar site, and a trigonal bipyramidal site, are representative of the Fe2 + sites found in crystals and glasses. A particular attention has been paid to the definition of the p -d hybridization Hamiltonian which occurs for noncentrosymmetric symmetries in order to account for electric dipole transitions. For the different sites under study, an excellent agreement between calculations and experiments was found for both optical and x-ray absorption spectra, in particular in terms of relative intensities and energy positions of electronic transitions. To our knowledge, these are the first calculations of optical absorption spectra on Fe2 + placed in such diverse site symmetries, including centrosymmetric sites. The proposed theoretical model should help to interpret the features of both the optical absorption and the K pre-edge absorption spectra of 3 d transition metal ions and to go beyond the usual fingerprint interpretation.

  15. Halo Gas Cross Sections And Covering Fractions of MgII Absorption Selected Galaxies

    CERN Document Server

    Kacprzak, G G; Steidel, C C; Murphy, M T

    2007-01-01

    We examine halo gas cross sections and covering fractions, f_c, of intermediate redshift MgII absorption selected galaxies. We computed statistical absorber halo radii, R_x, using current values of dN/dz and Schechter luminosity function parameters, and have compared these values to the distribution of impact parameters and luminosities from a sample of 37 galaxies. For equivalent widths W_r(2796) > 0.3 Ang, we find 43 R_x and several non-absorbing galaxies lie at D ~ 0.6 for our sample. Moreover, the data suggest halo radii of MgII absorbing galaxies do not follow a luminosity scaling with beta in the range of 0.2-0.28, if f_c= 1 as previously reported. However, provided f_c~0.6, we find that halo radii can remain consistent with a Holmberg-like luminosity relation with beta > 0.2 and R* = R_x/sqrt(f_c)= 110 kpc. No luminosity scaling (beta=0) is also consistent with the observed distribution of impact parameters if f_c < 0.37. The data support a scenario in which gaseous halos are patchy and likely hav...

  16. EPR and optical absorption studies of vanadyl impurity in zinc potassium phosphate hexahydrate single crystal

    Energy Technology Data Exchange (ETDEWEB)

    Kripal, Ram, E-mail: ram_kripal2001@rediffmail.co [Department of Physics, University of Allahabad, Allahabad 211002 (India); Maurya, Manju, E-mail: mmanju8@yahoo.co.i [Department of Physics, University of Allahabad, Allahabad 211002 (India); Bajpai, Manisha [Department of Physics, University of Allahabad, Allahabad 211002 (India); Govind, Har [Department of Electronics, Ewing Christian College, Allahabad 211003 (India)

    2009-11-01

    Electron paramagnetic resonance (EPR) study of VO{sup 2+} doped zinc potassium phosphate hexahydrate single crystal is carried out. The angular variation of the spectra is studied in the three crystallographic planes. The principal value of spin Hamiltonian parameters g and A and the direction cosines which principal axes make with the crystallographic axes are determined. The observed values are site I: g{sub ||} =1.9664+-0.0002, g{sub perpendicular} =1.9973+-0.0002, A{sub ||} =150+-2x10{sup -4}, A{sub perpendicular} =60+-2x10{sup -4} cm{sup -1}; site II: g{sub ||} =1.9276+-0.0002, g{sub perpendicular} =1.9921+-0.0002, A{sub ||} =155+-2x10{sup -4} and A{sub perpendicular} =62+-2x10{sup -4} cm{sup -1}. By comparison of direction cosines of g from EPR with the direction cosines of different bonds obtained from crystal structure data it is ascertained that the VO{sup 2+} ion occupies Zn{sup 2+} substitutional sites. The optical absorption study of the crystal at room temperature is also carried out. The bands observed in the optical absorption spectrum are attributed to d-d transitions. The EPR results together with the optical data are employed to estimate the molecular orbital (MO) coefficients. These MO coefficients (also called bonding coefficients) are further used to discuss the nature of bonding of VO{sup 2+} ion with different ligands in the crystal.

  17. EPR and optical absorption of VO{sup 2+} impurity in lithium potassium sulphate single crystal

    Energy Technology Data Exchange (ETDEWEB)

    Kripal, Ram, E-mail: ram_kripal2001@rediffmail.co [Department of Physics, University of Allahabad, Allahabad 211002 (India); Maurya, Manju, E-mail: mmanju8@yahoo.co.i [Department of Physics, University of Allahabad, Allahabad 211002 (India)

    2009-05-01

    Electron paramagnetic resonance (EPR) and optical absorption studies of VO{sup 2+} doped lithium potassium sulphate single crystals are carried out at room temperature. The angular variation of the spectra is studied in the crystallographic a*b, bc and ca* plane. Vanadyl is found to have fixed orientations in the lattice and there are two magnetically inequivalent complexes in the lattice. The spin Hamiltonian parameters obtained from single crystal data for the two sites are, Site I: g{sub xx}=2.0015+-0.0002, g{sub yy}=1.9835+-0.0002, g{sub zz}=1.9211+-0.0002, A{sub xx}=(48+-2)x10{sup -4} cm{sup -1}, A{sub yy}=(64+-2)x10{sup -4} cm{sup -1}, A{sub zz}=(169+-2)x10{sup -4} cm{sup -1}, Site II: g{sub xx}=2.0019+-0.0002, g{sub yy}=1.9796+-0.0002, g{sub zz} =1.9225+-0.0002, A{sub xx}=(48+-2)x10{sup -4} cm{sup -1}, A{sub yy}=(83+-2)x10{sup -4} cm{sup -1}, A{sub zz}=(178+-2)x10{sup -4} cm{sup -1}. The first three bands observed in optical absorption spectrum are attributed to d-d transitions and the last band is probably charge transfer band. The band positions are calculated using energy expressions and compared with the observed values to confirm the transitions. Crystal field parameter (D{sub q}) and tetragonal parameters (D{sub s} and D{sub t}) are also evaluated. Using EPR and optical results, the molecular orbital parameters of VO{sup 2+} ions in the lattice are evaluated with a tetragonal symmetry approximation (because the rhombic part is small) and the nature of bonding in the complex is discussed.

  18. Structural, thermal and optical absorption features of heavy metal oxides doped tellurite rich glasses

    Science.gov (United States)

    Kaky, Kawa M.; Lakshminarayana, G.; Baki, S. O.; Kityk, I. V.; Taufiq-Yap, Y. H.; Mahdi, M. A.

    In order to improve tellurite glass stability to be applicable for optical fiber amplifier applications, glasses with the composition of (70 - x)TeO2. (10)ZnO. (10)WO3. (5)Na2O. (5)TiO2. (x)Bi2O3 (x = 1, 2, 3, 4, and 5 mol%) have been produced and characterized using the related methods. Structural properties were investigated using X-ray diffraction (XRD) which confirms the non-crystalline structure and scanning electron microscopy (SEM) micrographs also confirm the XRD results. The energy dispersive X-ray (EDX) analysis profiles show that all the mentioned elements are present in the prepared glasses. Following the IR spectra, all the tellurium bonds such as stretching vibrations of TeO4 tbp and TeO3/TeO3+1 unit are revealed. Raman spectra confirm the presence of different functional groups, actually, it shows bands mainly in four spectral regions: R1 (65-150) cm-1, R2 (280-550) cm-1, R3 (880-950) cm-1 and R4 (916-926) cm-1 and the identified bands are assigned to respective molecular groups. The thermal study was carried out using Differential scanning calorimetry (DSC) which indicates good thermal stability of the synthesized glasses with increasing Bi concentration. From the optical absorption spectra, we evaluated cut-off edge wavelengths and found increasing cutoff wavelength with an increase in Bi2O3 concentration. In the UV-Visible region, optical band gap energy and allowed transitions were investigated using three methods; direct, indirect, and absorption spectrum fitting (ASF), and band gaps from indirect and ASF were matched.

  19. Extending differential optical absorption spectroscopy for limb measurements in the UV

    Directory of Open Access Journals (Sweden)

    J. Puķīte

    2009-11-01

    Full Text Available Methods of UV/VIS absorption spectroscopy to determine the constituents in the Earth's atmosphere from measurements of scattered light are often based on the Beer-Lambert law, like e.g. Differential Optical Absorption Spectroscopy (DOAS. Therefore they are strictly valid for weak absorptions and narrow wavelength intervals (strictly only for monochromatic radiation. For medium and strong absorption (e.g. along very long light-paths like in limb geometry the relation between the optical depth and the concentration of an absorber is not linear anymore. As well, for large wavelength intervals the wavelength dependent differences in the travelled light-paths become important, especially in the UV, where the probability for scattering increases strongly with decreasing wavelength.

    However, by taking into account these dependencies, the applicability of the DOAS method can be extended also to cases with medium to strong absorptions and for broader wavelength intervals.

    Common approaches for this correction are the so called air mass factor modified (or extended DOAS and the weighting function modified DOAS. These approaches take into account the wavelength dependency of the slant column densities (SCDs, but also require a-priori knowledge for the air mass factor or the weighting function calculation by radiative transfer modelling.

    We describe an approach that considers the fitting results obtained from DOAS, the SCDs, as a function of wavelength and vertical optical depth and expands this function into a Taylor series of both quantities. The Taylor coefficients are then applied as additional fitting parameters in the DOAS analysis. Thus the variability of the SCD in the fit window is determined by the retrieval itself.

    This new approach gives a description of the SCD that is as close to reality as desired (depending on the order of the Taylor expansion, and is independent from any assumptions or a-priori knowledge

  20. Optical absorption of (Ag-Au133(SCH352 bimetallic monolayer-protected clusters

    Directory of Open Access Journals (Sweden)

    Alessandro Fortunelli

    2016-10-01

    Full Text Available The evolution of the optical absorption spectrum of bimetallic Ag-Au monolayer-protected clusters (MPC obtained by progressively doping Ag into the experimentally known structure of Au133(SR52 was predicted via rigorous time-dependent density-functional theory (TDDFT calculations. In addition to monometallic Au133(SR52 and Ag133(SR52 species, 5 different (Ag-Au133(SR52 homotops were considered with varying Ag content and site positioning, and their electronic structure and optical response were analyzed in terms of Projected Density Of States (PDOS, the induced or transition electron density, and Transition Component Maps (TCM at selected excitation energies. It was found that Ag doping led to the effects rather different from those encountered in bare metal clusters. And it was also observed that Ag doping could produce structured spectral features, especially in the 3–4 eV range but also in the optical region if Ag atoms were located in the sub-staple region, as rationalized by the accompanying electronic analysis. Additionally, Au doping into the staples of Ag-rich MPC also gave rise to a more homogeneous induced electron density. These findings show the great sensitivity of the electronic response of MPC nanoalloy systems to the exact location of the alloying sites.

  1. Noise-driven optical absorption coefficients of impurity doped quantum dots

    Science.gov (United States)

    Ganguly, Jayanta; Saha, Surajit; Pal, Suvajit; Ghosh, Manas

    2016-01-01

    We make an extensive investigation of linear, third-order nonlinear, and total optical absorption coefficients (ACs) of impurity doped quantum dots (QDs) in presence and absence of noise. The noise invoked in the present study is a Gaussian white noise. The quantum dot is doped with repulsive Gaussian impurity. Noise has been introduced to the system additively and multiplicatively. A perpendicular magnetic field acts as a source of confinement and a static external electric field has been applied. The AC profiles have been studied as a function of incident photon energy when several important parameters such as optical intensity, electric field strength, magnetic field strength, confinement energy, dopant location, relaxation time, Al concentration, dopant potential, and noise strength take on different values. In addition, the role of mode of application of noise (additive/multiplicative) on the AC profiles has also been analyzed meticulously. The AC profiles often consist of a number of interesting observations such as one photon resonance enhancement, shift of AC peak position, variation of AC peak intensity, and bleaching of AC peak. However, presence of noise alters the features of AC profiles and leads to some interesting manifestations. Multiplicative noise brings about more complexity in the AC profiles than its additive counterpart. The observations indeed illuminate several useful aspects in the study of linear and nonlinear optical properties of doped QD systems, specially in presence of noise. The findings are expected to be quite relevant from a technological perspective.

  2. Optical limiting of niobic tellurite glass induced by self-trapped exciton absorption of the AgCl nanocrystal dopant

    Institute of Scientific and Technical Information of China (English)

    ZHAO ZhenYu; LIN Jian; JIA TianQin; SUN ZhenRong; WANG ZuGeng

    2009-01-01

    Nioblc tellurite glass doped by silver chloride nanocrystal was prepared with the melting-quenching and heat treatment method, and the self-trapped exciton absorption band of the silver chloride nanocrystal was observed at 532 nm in the UV-visible absorption spectrum. The glass structure chara-cteristics were investigated by Raman spectroscopy, and the mechanism of self-trapped exciton was analyzed by Jahn-Teller model. Its optical limiting was measured with 532 nm picosecond laser pulses, and the corresponding nonlinear absorption coefficient was measured with open-aperture Z-scan. The experimental results showed that optical limiting at 532 nm was attributed to free carrier absorption between the self-trapped state and the continuum band.

  3. Redox ratio and optical absorption of polyvalent ions in industrial glasses

    Indian Academy of Sciences (India)

    W Thiemsorn; K Keowkamnerd; P Suwannathada; H Hessenkemper; S Phanichaphant

    2007-10-01

    The changes in glass structure and redox ratio, (reduced ion to oxidized ion) of Mn2+–Mn3+, Cu+–Cu2+, Cr3+–Cr6+, Ni2+–Ni3+ and Co2+–Co3+ couples and optical absorption due to Mn3+, Cu2+, Cr3+, Ni2+ and Co2+ ions in industrial soda–lime–silica glass were investigated as a function of Na2O concentration in the range 11–19 mol%. With increasing Na2O concentration in the experimental glasses, the basicity, expressed as calculated basicity, cal, increased. 29Si NMR and X-ray diffraction were used to investigate the structural change in glasses. The NMR spectra showed high non-bridging oxygens (NBOs) when the basicity of glass was increased. The results were interpreted to be due to the tetrahedral networks; 4 species were depolymerized by replacing the bridging oxygens (BOs) with NBOs to 3 species. These results confirmed the shift of broadening peaks of XRD patterns. The redox reactions of the Mn2+–Mn3+, Cu+–Cu2+ and Cr3+–Cr6+ couples shifted more toward their oxidized ions due to the oxygen partial pressure, (2), during melting and the oxide ion activity, O2–, increased with increasing glass basicity. These changes caused the redox ratio of these ion couples to decrease. The Ni2+–Ni3+ and Co2+–Co3+ couples were assumed to be present only in the Ni2+ and Co2+ ions in these glasses, respectively. The optical absorption bands due to Mn3+, Cu2+, Cr3+, Ni2+ and Co2+ ions were also investigated. Their spectra occurred at constant wavelengths with different optical densities or intensities as a function of glass basicity. The increase in the intensities of the absorption bands of these absorbing ions, except for Cr3+ ion, at the maximum wavelength, depends not only on the ion concentration but also on the increase of polarizability of oxide (–II) species, oxide(–II), surrounding the ions. This value affected directly the extinction coefficients of the ions, ion. The increase of ion caused the colour of glasses appearing in high intensity. In

  4. Transient optical response of ultrafast nonequilibrium excited metals: Effects of electron-electron contribution to collisional absorption

    CERN Document Server

    Colombier, Jean-Philippe; Audouard, Eric; Stoian, Razvan

    2008-01-01

    Approaching energy coupling in laser-irradiated metals, we point out the role of electron-electron collision as an efficient control factor for ultrafast optical absorption. The high degree of laser-induced electron-ion nonequilibrium drives a complex absorption pattern with consequences on the transient optical properties. Consequently, high electronic temperatures determine largely the collision frequency and establish a transition between absorptive regimes in solid and plasma phases. In particular, taking into account umklapp electron-electron collisions, we performed hydrodynamic simulations of the laser-matter interaction to calculate laser energy deposition during the electron-ion nonequilibrium stage and subsequent matter transformation phases. We observe strong correlations between optical and thermodynamic properties according to the experimental situations. A suitable connection between solid and plasma regimes is chosen in accordance with models that describe the behavior in extreme, asymptotic re...

  5. Simultaneous high crystallinity and sub-bandgap optical absorptance in hyperdoped black silicon using nanosecond laser annealing

    Energy Technology Data Exchange (ETDEWEB)

    Franta, Benjamin, E-mail: bafranta@gmail.com; Pastor, David; Gandhi, Hemi H.; Aziz, Michael J.; Mazur, Eric [School of Engineering and Applied Sciences, Harvard University, Cambridge, Massachusetts 02138 (United States); Rekemeyer, Paul H.; Gradečak, Silvija [Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139 (United States)

    2015-12-14

    Hyperdoped black silicon fabricated with femtosecond laser irradiation has attracted interest for applications in infrared photodetectors and intermediate band photovoltaics due to its sub-bandgap optical absorptance and light-trapping surface. However, hyperdoped black silicon typically has an amorphous and polyphasic polycrystalline surface that can interfere with carrier transport, electrical rectification, and intermediate band formation. Past studies have used thermal annealing to obtain high crystallinity in hyperdoped black silicon, but thermal annealing causes a deactivation of the sub-bandgap optical absorptance. In this study, nanosecond laser annealing is used to obtain high crystallinity and remove pressure-induced phases in hyperdoped black silicon while maintaining high sub-bandgap optical absorptance and a light-trapping surface morphology. Furthermore, it is shown that nanosecond laser annealing reactivates the sub-bandgap optical absorptance of hyperdoped black silicon after deactivation by thermal annealing. Thermal annealing and nanosecond laser annealing can be combined in sequence to fabricate hyperdoped black silicon that simultaneously shows high crystallinity, high above-bandgap and sub-bandgap absorptance, and a rectifying electrical homojunction. Such nanosecond laser annealing could potentially be applied to non-equilibrium material systems beyond hyperdoped black silicon.

  6. Synthesis and optical absorption properties of TiO2 nanostructures in SiO2 by sequential implantation of Cu and Ti ions

    Science.gov (United States)

    Jing, Yaqi; Mu, Xiaoyu; Liu, Xiaoyu; Liu, Changlong

    2017-09-01

    Optical-grade silica samples were singly or sequentially implanted with 100 keV Cu and 40 keV Ti ions at the same fluence of 1 × 1017 ions/cm2, and were then subjected to furnace annealing in nitrogen ambient. Structure, spatial distribution as well as optical absorption properties of the synthesized nanostructures have been investigated in detail by using various techniques. Our results clearly show that high fluence Ti ion implantation together with subsequent annealing at high temperature could lead to formation of TiO2 nanoparticles with both rutile and anatase phases in SiO2 substrate, which causes an absorption band edge at about 365 nm. The pre-implantation of Cu ion could not only largely enhance growth of the TiO2 nanoparticles during annealing, but also significantly reduce the corresponding band gap energy. Moreover, results from cross sectional transmission electron microscopy measurements demonstrate that the pre-implanted Cu atoms participates into the thermal growth of the TiO2 nanoparticles, which may be responsible for the large redshift of the absorption behavior obtained in the Cu and Ti sequentially implanted SiO2.

  7. Diode-Laser Induced Fluorescence Spectroscopy of an Optically Thick Plasma in Combination with Laser Absorption Spectroscopy

    Directory of Open Access Journals (Sweden)

    S. Nomura

    2013-01-01

    Full Text Available Distortion of laser-induced fluorescence profiles attributable to optical absorption and saturation broadening was corrected in combination with laser absorption spectroscopy in argon plasma flow. At high probe-laser intensity, saturated absorption profiles were measured to correct probe-laser absorption. At low laser intensity, nonsaturated absorption profiles were measured to correct fluorescence reabsorption. Saturation broadening at the measurement point was corrected using a ratio of saturated to non-saturated broadening. Observed LIF broadening and corresponding translational temperature without correction were, respectively, 2.20±0.05 GHz and 2510±100 K and corrected broadening and temperature were, respectively, 1.96±0.07 GHz and 1990±150 K. Although this correction is applicable only at the center of symmetry, the deduced temperature agreed well with that obtained by LAS with Abel inversion.

  8. Optical absorption enhancement in a hybrid system photonic crystal - thin substrate for photovoltaic applications.

    Science.gov (United States)

    Buencuerpo, Jeronimo; Munioz-Camuniez, Luis E; Dotor, Maria L; Postigo, Pablo A

    2012-07-02

    A hybrid approach for light trapping using photonic crystal nanostructures (nanorods, nanopillars or nanoholes) on top of an ultra thin film as a substrate is presented. The combination of a nanopatterned layer with a thin substrate shows an enhanced optical absorption than equivalent films without patterning and can compete in performance with nanostructured systems without a substrate. The designs are tested in four relevant materials: amorphous silicon (a-Si), crystalline silicon (Si), gallium arsenide (GaAs) and indium phosphide (InP). A consistent enhancement is observed for all of the materials when using a thin hybrid system (300 nm) even compared to the non patterned thin film with an anti-reflective coating (ARC). A realistic solar cell structure composed of a hybrid system with a layer of indium tin oxide (ITO) an ARC and a back metal layer is performed, showing an 18% of improvement for the nanostructured device.

  9. Formation and Optical Absorption of Photo-reduced Gold Nanoparticles Inside Pores of Mesoporous Silica

    Institute of Scientific and Technical Information of China (English)

    SHI Hua-Zhong; YAO Bao-Dian; ZHANG Li-De; BI Hui-Juan; CAI Wei-Ping; WU Yu-Cheng

    2000-01-01

    Mesoporous silica with gold nanoparticles inside its pores was synthesized by soaking and photo-reduction method. This new material was characterized by transmission electron microscopy, x-ray photoelectron spectroscopy and Brunauer-Emmett-Teller techniques. The results showed that gold nanoparticles were isolated from each other and uniformly dispersed inside the pores of silica, most of which were less than 4 nm in diameter. It was found that in optical absorption spectrum, surface plasma resonance peak of nanosized gold particles assumed a significant redshift (about 55nm) with respect to that predicted by Mie theory. This can be explained in terms of interface interaction (boundary coupling) between gold particles and pore walls of porous silica.

  10. Self-similar Shape Mode of Optical Pulse Propagation in Medium with non-stationary Absorption

    Science.gov (United States)

    Trofimov, Vycheslav A.; Lysak, Tatyana M.; Fedotov, Mihail V.; Prokopenko, Alexander S.

    2015-03-01

    We discuss laser pulse propagation with the self-similar shape in a medium with instantaneous nonlinear absorption. We consider two cases of the laser pulse propagation. First one corresponds to problem of laser-induced plasma generation in silica under action of TW laser pulse. The second one corresponds to femtosecond laser pulse propagation in medium with nanoparticles of noble metals. In both cases the mode of the self-similar shape of pulse is of interest. We discuss also a physical mechanism of non-linear acceleration or slowing-down for laser pulse propagation in a medium with nanoparticles. The last phenomena are important, in particular, for a problem of data processing of all optical method. We used analytical approach for considered problem as well as computer simulation.

  11. Interpretation of the optical absorption spectrum and of the paramagnetic susceptibility of neodymium oxisulfide

    Energy Technology Data Exchange (ETDEWEB)

    Beaury, L.; Caro, P. (Centre National de la Recherche Scientifique, 92 - Meudon-Bellevue (FR))

    1990-03-01

    The optical absorption spectrum of neodymium oxisulfide has been fitted; the mean quadratic deviation is 10.7 cm{sup -1} for 65 assigned Stark levels with a Hamiltonian involving 14 free-ion parameters and six C{sub 3v} crytal field parameters. The paramagnetic susceptibilities (mean, parallel and perpendicular to the trigonal axis in the structure) have been measured from 4.2 K to about 200 K, and compared with the values derived from the wave vectors and energies of the 18 lowest Kramers doublets through the application of the Van Vleck formula. We also give the values of the spin-orbit coupling constant {zeta} versus the Slater parameter F{sub 2} for six compounds spanning the whole of the neodymium nephelautic series.

  12. Three-photon absorption in optical parametric oscillators based on OP-GaAs

    Science.gov (United States)

    Heckl, Oliver H.; Bjork, Bryce J.; Winkler, Georg; Bryan Changala, P.; Spaun, Ben; Porat, Gil; Bui, Thinh Q.; Lee, Kevin F.; Jiang, Jie; Fermann, Martin E.; Schunemann, Peter G.; Ye, Jun

    2016-11-01

    We report on the first singly-resonant (SR), synchronously pumped optical parametric oscillator (OPO) based on orientation-patterned gallium arsenide (OP-GaAs). Together with a doubly resonant (DR) degenerate OPO based on the same OP-GaAs material, the output spectra cover 3 to 6 ${\\mu}$m within ~3 dB of relative power. The DR-OPO has the highest output power reported to date from a femtosecond, synchronously pumped OPO based on OP-GaAs. We discovered strong three photon absorption with a coefficient of 0.35 ${\\pm}$ 0.06 cm${^3}$/GW${^2}$ for our OP-GaAs sample, which limits the output power of these OPOs as mid-IR light sources. We present a detailed study of the three photon loss on the performance of both the SR and DR-OPOs, and compare them to those without this loss mechanism.

  13. Three Photon Absorption in Optical Parametric Oscillators Based on OP-GaAs

    CERN Document Server

    Heckl, Oliver H; Winkler, Georg; Changala, P Bryan; Spaun, Ben; Porat, 1 Gil; Bui, Thinh Q; Lee, Kevin F; Jiang, Jie; Fermann, Martin; Schunemann, Peter G; Ye, Jun

    2016-01-01

    We report on the first singly-resonant (SR), synchronously pumped optical parametric oscillator (OPO) based on orientation-patterned gallium arsenide (OP-GaAs). Together with a doubly resonant (DR) degenerate OPO based on the same OP-GaAs material, the output spectra cover 3 to 6 ${\\mu}$m within ~3 dB of relative power. The DR-OPO has the highest output power reported to date from a femtosecond, synchronously pumped OPO based on OP-GaAs. We discovered strong three photon absorption with a coefficient of 0.35 ${\\pm}$ 0.06 cm${^3}$/GW${^2}$ for our OP-GaAs sample, which limits the output power of these OPOs as mid-IR light sources. We present a detailed study of the three photon loss on the performance of both the SR and DR-OPOs, and compare them to those without this loss mechanism.

  14. High precision measurement of formaldehyde in air with differential optical absorption spectroscopy

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The formaldehyde (HCHO) measurement is described by differential optical absorption spectroscopy (DOAS) technique and the data processing method is discussed in detail, including the selection of retrieval wavelength band, the removing of interfering structures, the steps of data processing and the spectrum dealing with nonlinear method. The HCHO concentration retrieved in different wavelength bands were compared, including relative error, repeatability and detection limit. As a result, the band from 314 to 332 nm was most suitable for the retrieval of HCHO. With these methods, high measurement precision of 1.9% was obtained and the detection limit of HCHO is less than 1.5 ppb. In addition, high linear relativity 0.9999 is achieved by measuring five different concentrations of HCHO with this system.

  15. Concurrent multiaxis differential optical absorption spectroscopy system for the measurement of tropospheric nitrogen dioxide

    Science.gov (United States)

    Leigh, Roland J.; Corlett, Gary K.; Friess, Udo; Monks, Paul S.

    2006-10-01

    The development of a new concurrent multiaxis (CMAX) sky viewing spectrometer to monitor rapidly changing urban concentrations of nitrogen dioxide is detailed. The CMAX differential optical absorption spectroscopy (DOAS) technique involves simultaneous spectral imaging of the zenith and off-axis measurements of spatially resolved scattered sunlight. Trace-gas amounts are retrieved from the measured spectra using the established DOAS technique. The potential of the CMAX DOAS technique to derive information on rapidly changing concentrations and the spatial distribution of NO2 in an urban environment is demonstrated. Three example data sets are presented from measurements during 2004 of tropospheric NO2 over Leicester, UK (52.62°N, 1.12°W). The data demonstrate the current capabilities and future potential of the CMAX DOAS method in terms of the ability to measure real-time spatially disaggregated urban NO2.

  16. The Optical Absorption Coefficient of Maize Grains Investigated by Photoacoustic Spectroscopy

    Science.gov (United States)

    Rodríguez-Páez, C. L.; Carballo-Carballo, A.; Rico-Molina, R.; Hernández-Aguilar, C.; Domínguez-Pacheco, A.; Cruz-Orea, A.; Moreno-Martínez, E.

    2017-01-01

    In the maize and tortilla industry, it is important to characterize the color of maize ( Zea mays L.) grain, as it is one of the attributes that directly affect the quality of the tortillas consumed by the population. For this reason, the availability of alternative techniques for assessing and improving the quality of grain is valued. Photoacoustic spectroscopy has proven to be a useful tool for characterizing maize grain. So, the objective of the present study was to determine the optical absorption coefficient β of the maize grain used to make tortillas from two regions of Mexico: (a) Valles Altos, 2012-2013 production cycle and (b) Guasave, Sinaloa, 2013-2014 production cycle. Traditional reflectance measurements, physical characteristics of the grain and nutrient content were also calculated. The experimental results show different characteristics for maize grains.

  17. Morphology Control and Optical Absorption Properties of Ag Nanoparticles by Ion Implantation

    Institute of Scientific and Technical Information of China (English)

    G.X. Cai; F. Ren; X.H. Xiao; L.X. Fan; X.D. Zhou; C.Z. Jiang

    2009-01-01

    Ion implantation is a powerful method for fabricating nanoparticles in dielectric. For the actual application of nanoparticle composites, a careful control of nanoparticles has to be achieved. In this letter, the size, distribution and morphology of Ag nanoparticles are controlled by controlling the ion current density, ion implantation sequence and ion irradiation dose. Single layer Ag nanoparticles are formed by Ag~+ ion implantation at current density of 2.5 μA/cm~2. By Ag and Cu ions sequential implantation, the size of single layer Ag nanoparticles increases. While, by Cu and Ag ions sequential implantation, uniform Ag nanoparticles with wide distribution are formed. The morphology of Ag nanoparticles changes to hollow and sandwiched nanoparticles by Cu~+ ion irradiation to doses of 3×10~(16) and 5×10~(16) ions/cm~2. The optical absorption properties of Ag nanoparticles are also tailored by these ways.

  18. Parameterization of light absorption by components of seawater in optically complex coastal waters of the Crimea Peninsula (Black Sea).

    Science.gov (United States)

    Dmitriev, Egor V; Khomenko, Georges; Chami, Malik; Sokolov, Anton A; Churilova, Tatyana Y; Korotaev, Gennady K

    2009-03-01

    The absorption of sunlight by oceanic constituents significantly contributes to the spectral distribution of the water-leaving radiance. Here it is shown that current parameterizations of absorption coefficients do not apply to the optically complex waters of the Crimea Peninsula. Based on in situ measurements, parameterizations of phytoplankton, nonalgal, and total particulate absorption coefficients are proposed. Their performance is evaluated using a log-log regression combined with a low-pass filter and the nonlinear least-square method. Statistical significance of the estimated parameters is verified using the bootstrap method. The parameterizations are relevant for chlorophyll a concentrations ranging from 0.45 up to 2 mg/m(3).

  19. Electron spin resonance and optical absorption spectroscopic studies of Cu{sup 2+} ions in aluminium lead borate glasses

    Energy Technology Data Exchange (ETDEWEB)

    SivaRamaiah, G., E-mail: gsivaram7@yahoo.co.in [Department of Physics, Government College for Men, Kadapa 516004 (India); LakshmanaRao, J., E-mail: jlrao46@yahoo.co.in [Department of Physics, Sri Venkateswara University, Tirupati 517502 (India)

    2013-02-25

    Highlights: Black-Right-Pointing-Pointer It is for the first time to study optical absorption and EPR in these glasses. Black-Right-Pointing-Pointer The thermal properties are new and interesting in this glass system. Black-Right-Pointing-Pointer It is for the first time to report three optical bands for Cu{sup 2+} in oxide glasses. Black-Right-Pointing-Pointer The interesting optical results are due to excellent sample preparation. - Abstract: Electron Spin Resonance and optical absorption spectral studies of Cu{sup 2+} ions in 5 Al{sub 2}O{sub 3} + 75 B{sub 2}O{sub 3} + (20-z) PbO + z CuO (where z = 0.1-1.5 mol.% of CuO) glasses have been reported. The EPR spectra of all the glasses show resonance signals characteristic of Cu{sup 2+} ions at both room and low temperatures. The number of spins and Gibbs energy were calculated at different concentrations and temperatures. From the plot of the ratio of logarithmic number of spins and absolute temperature and the reciprocal of absolute temperature, the entropy and enthalpy have been evaluated. The optical absorption spectra of all the glasses exhibit three bands and these bands have been assigned to {sup 2}B{sub 1g} {yields} {sup 2}E{sub g}, {sup 2}B{sub 1g} {yields} {sup 2}B{sub 2g}, and {sup 2}B{sub 1g} {yields} {sup 2}A{sub 1g} transitions in the decreasing order of energy. It is for the first time to observe three optical absorption bands for Cu{sup 2+} ions in oxide glasses. Such type of results is due to excellent sample preparation. From the EPR and optical absorption spectroscopies data, the molecular orbital coefficients have been evaluated.

  20. Ellipsometric analysis and optical absorption characterization of gallium phosphide nanoparticulate thin film

    Institute of Scientific and Technical Information of China (English)

    Zhang Qi-Xian; Wei Wen-Sheng; Ruan Fang-Ping

    2011-01-01

    Gallium phosphide (GaP)nanoparticulate thin films were easily fabricated by colloidal suspension deposition via GaP nanoparticles dispersed in N,N-dimethylformamide. The microstructure of the film was performed by x-ray diffraction, high resolution transmission electron microscopy and field emission scanning electron microscopy. The film was further investigated by spectroscopic ellipsometry.After the model GaP+void|Si02 was built and an effective medium approximation was adopted, the values of the refractive index n and the extinction coefficient k were calculated for the energy range of 0.75 eV-4.0 eV using the dispersion formula in DeltaPsi2 software. The absorption coefficient of the film was calculated from its k and its energy gaps were further estimated according to the Tauc equation, which were further verified by its fluorescence spectrum measurement. The structure and optical absorption properties of the nanoparticulate films are promising for their potential applications in hybrid solar cells.

  1. The INTEGRAL/IBIS AGN catalogue I: X-ray absorption properties versus optical classification

    CERN Document Server

    Malizia, A; Bazzano, A; Bird, A J; Masetti, N; Panessa, F; Stephen, J B; Ubertini, P

    2012-01-01

    In this work we present the most comprehensive INTEGRAL AGN sample which lists 272 objects. Here we mainly use this sample to study the absorption properties of active galaxies, to probe new AGN classes and to test the AGN unification scheme. We find that half (48%) of the sample is absorbed while the fraction of Compton thick AGN is small (~7%). In line with our previous analysis, we have however shown that when the bias towards heavily absorbed objects which are lost if weak and at large distance is removed, as it is possible in the local Universe, the above fractions increase to become 80% and 17%. We also find that absorption is a function of source luminosity, which implies some evolution in the obscuration properties of AGN. Few peculiar classes, so far poorly studied in the hard X-ray band, have been detected and studied for the first time such as 5 XBONG, 5 type 2 QSOs and 11 LINERs. In terms of optical classification, our sample contains 57% of type 1 and 43% of type 2 AGN; this subdivision is simila...

  2. Optical absorption, photoluminescence and structural analysis of CdS quantum dots in weak confinement

    Science.gov (United States)

    Mishra, Rakesh K.; Vedeshwar, A. G.; Tandon, R. P.

    2014-02-01

    The diffusion-controlled growth of CdS quantum dots (QDs) dispersed in a silicate glass matrix was investigated. It was found that the size of CdS QDs can be controlled by either heat treatment at various temperatures for a fixed duration or varying times at a constant temperature. Pastel yellow colored glass samples were obtained due to the presence of CdS petite crystals. X-ray diffraction (XRD) was used for determining the average dot size which varied from 3.8 to 30 nm. The typical quantum confinement effect was clearly observed from the blue shift measured in the optical absorption edge with decreasing dot size in the absorption spectroscopy. The band gap of CdS QDs ranges from 2.41 to 2.82 eV. Measured photoluminescence (PL) at an excitation wavelength of 350 nm showed the red shift of emission wavelength with increasing thermal treatment time and temperature in agreement with the increasing dot sizes. The half-width of PL spectra seems to indicate qualitatively the size distribution of dots and is consistent with the treatment parameters.

  3. Magnetometry with nitrogen-vacancy ensembles in diamond based on infrared absorption in a doubly resonant optical cavity

    CERN Document Server

    Dumeige, Yannick; Jacques, Vincent; Treussart, François; Roch, Jean-François; Debuisschert, Thierry; Acosta, Victor; Jarmola, Andrey; Jensen, Kasper; Kehayias, Pauli; Budker, Dmitry

    2013-01-01

    We propose to use an optical cavity to enhance the sensitivity of magnetometers relying on the detection of the spin state of high-density nitrogen-vacancy ensembles in diamond using infrared optical absorption. The role of the cavity is to obtain a contrast in the absorption-detected magnetic resonance approaching unity at room temperature. We project an increase in the photon shot-noise limited sensitivity of two orders of magnitude in comparison with a single-pass approach. Optical losses can limit the enhancement to one order of magnitude which could still enable room temperature operation. Finally, the optical cavity also allows to use smaller pumping power when it is designed to be resonant at both the pump and the signal wavelength.

  4. Low frequency absorption properties of a thin metamaterial absorber with cross-array on the surface of a magnetic substrate

    Science.gov (United States)

    Chen, Qian; Bie, Shaowei; Yuan, Wei; Xu, Yongshun; Xu, Haibing; Jiang, Jianjun

    2016-10-01

    The design, fabrication, and measurement of a metamaterial with broadband microwave absorption properties in the low frequency range are presented in this paper. The metamaterial has a layered structure with a thickness of 2.2 mm, and consists of a conventional printed circuit board (PCB) process fabricated cross array on the surface of a flake-shaped carbonyl iron (CI) powder-filled silicon rubber composite magnetic substrate backed by a metal plane. The measurement results indicate that the absorption bandwidth (defined as the frequency range with reflection coefficient below  -10 dB) of the proposed structure is 2.55 GHz-5.68 GHz. The power loss mechanism was outlined according to the current distribution on and off the resonance frequency. Moreover, the absorption performance of the proposed structure for incident angles ranging from 0° to 60° for both transverse electric (TE) wave and transverse magnetic (TM) waves were exhibited.

  5. Terahertz cross-phase modulation of an optical mode

    DEFF Research Database (Denmark)

    Lavrinenko, Andrei; Novitsky, Andrey; Zalkovskij, Maksim

    2013-01-01

    We discuss an optical scheme which facilitates modulation of an optical waveguide mode by metallic-nanoslit-enhanced THz radiation. The waveguide mode acquires an additional phase shift due to THz nonlinearity with fields reachable in experiments.......We discuss an optical scheme which facilitates modulation of an optical waveguide mode by metallic-nanoslit-enhanced THz radiation. The waveguide mode acquires an additional phase shift due to THz nonlinearity with fields reachable in experiments....

  6. Electron Paramagnetic Resonance and Optical Absorption Studies on Copper Ions in Mixed Alkali Cadmium Phosphate Glasses

    Institute of Scientific and Technical Information of China (English)

    G.Giridhar; M.Rangacharyulu; R.V.S.S.N.Ravikumar; P.Sambasiva Rao

    2009-01-01

    Electron paramagnetic resonance (EPR) and optical absorption studies were carried out at room temperature on copper doped mixed alkali cadmium phosphate (LiNaCdP) glasses to understand the nature and symmetry of dopant. Three samples with varying concentrations of alkali ions have been prepared. The spin Hamiltonian parameters obtained from room temperature EPR spectra are: g||=2.437, g⊥=2.096, A||=117×10-4 cm-1, A⊥=26×10-4 cm-1 for LiNaCdP1, g||=2.441, g⊥=2.088, A||=121×10-4 cm-1, A⊥=25×10-4 cm-1 for LiNaCdP2 and g||=2.433, g⊥=2.096, A||=125×10-4 cm-1, A⊥=32×10-4 cm-1 for LiNaCdP3. These EPR results indicate that the dopant Cu2+ ion enters the glass matrix into a tetragonally elongated octahedral site. The bonding parameters evaluated by correlating optical and EPR data suggest that bonding between the central metal ion and ligands is partially covalent. The mixed alkali effect in cadmium phosphate glasses was reported.

  7. A low-cost portable fibre-optic spectrometer for atmospheric absorption studies

    Directory of Open Access Journals (Sweden)

    J. Bailey

    2013-01-01

    Full Text Available A compact and portable solar absorption spectrometer based on fibre-optic Fabry–Perot technology has been built and tested. The instrument weighs only 4.2 kg and operates from 5 W of power from internal batteries. It provides spectroscopy over the range from 5980–6580 cm−1 (1.52–1.67 μm at a resolution of 0.16 cm−1. The input to the spectrometer is via single-mode optical fibre from a solar tracking system. Spectral scanning is carried out with a piezoelectrically scanned fibre Fabry–Perot tunable filter. Software has been developed to calibrate the spectra in wavelength and relative flux. The signal to noise ratio in solar spectra is about 700 for a spectrum scanned at 200 milliseconds per spectral point. The techniques used should be capable of being adapted to a range of wavelengths and to higher or lower resolutions.

  8. Optical Absorption and Emission Mechanisms of Single Defects in Hexagonal Boron Nitride

    Science.gov (United States)

    Jungwirth, Nicholas R.; Fuchs, Gregory D.

    2017-08-01

    We investigate the polarization selection rules of sharp zero-phonon lines (ZPLs) from isolated defects in hexagonal boron nitride (HBN) and compare our findings with the predictions of a Huang-Rhys model involving two electronic states. Our survey, which spans the spectral range ˜550 - 740 nm , reveals that, in disagreement with a two-level model, the absorption and emission dipoles are often misaligned. We relate the dipole misalignment angle (Δ θ ) of a ZPL to its energy shift from the excitation energy (Δ E ) and find that Δ θ ≈0 ° when Δ E corresponds to an allowed HBN phonon frequency and that 0 ° ≤Δ θ ≤90 ° when Δ E exceeds the maximum allowed HBN phonon frequency. Consequently, a two-level Huang-Rhys model succeeds at describing excitations mediated by the creation of one optical phonon but fails at describing excitations that require the creation of multiple phonons. We propose that direct excitations requiring the creation of multiple phonons are inefficient due to the low Huang-Rhys factors in HBN and that these ZPLs are instead excited indirectly via an intermediate electronic state. This hypothesis is corroborated by polarization measurements of an individual ZPL excited with two distinct wavelengths that indicate a single ZPL may be excited by multiple mechanisms. These findings provide new insight on the nature of the optical cycle of novel defect-based single-photon sources in HBN.

  9. Assessment of the performance of a compact concentric spectrometer system for Atmospheric Differential Optical Absorption Spectroscopy

    Directory of Open Access Journals (Sweden)

    C. Whyte

    2009-12-01

    Full Text Available A breadboard demonstrator of a novel UV/VIS grating spectrometer has been developed based upon a concentric arrangement of a spherical meniscus lens, concave spherical mirror and curved diffraction grating suitable for a range of atmospheric remote sensing applications from the ground or space. The spectrometer is compact and provides high optical efficiency and performance benefits over traditional instruments. The concentric design is capable of handling high relative apertures, owing to spherical aberration and comma being near zero at all surfaces. The design also provides correction for transverse chromatic aberration and distortion, in addition to correcting for the distortion called "smile", the curvature of the slit image formed at each wavelength. These properties render this design capable of superior spectral and spatial performance with size and weight budgets significantly lower than standard configurations. This form of spectrometer design offers the potential for exceptionally compact instrument for differential optical absorption spectroscopy (DOAS applications from LEO, GEO, HAP or ground-based platforms. The breadboard demonstrator has been shown to offer high throughput and a stable Gaussian line shape with a spectral range from 300 to 450 nm at 0.5 nm resolution, suitable for a number of typical DOAS applications.

  10. Assessment of the performance of a compact concentric spectrometer system for Atmospheric Differential Optical Absorption Spectroscopy

    Directory of Open Access Journals (Sweden)

    C. Whyte

    2009-08-01

    Full Text Available A breadboard demonstrator of a novel UV/VIS grating spectrometer for atmospheric research has been developed based upon a concentric arrangement of a spherical meniscus lens, concave spherical mirror and curved diffraction grating suitable for a range of remote sensing applications from the ground or space. The spectrometer is compact and provides high optical efficiency and performance benefits over traditional instruments. The concentric design is capable of handling high relative apertures, owing to spherical aberration and coma being near zero at all surfaces. The design also provides correction for transverse chromatic aberration and distortion, in addition to correcting for the distortion called "smile", the curvature of the slit image formed at each wavelength. These properties render this design capable of superior spectral and spatial performance with size and weight budgets significantly lower than standard configurations. This form of spectrometer design offers the potential for an exceptionally compact instrument for differential optical absorption spectroscopy (DOAS applications particularly from space (LEO, GEO orbits and from HAPs or ground-based platforms. The breadboard demonstrator has been shown to offer high throughput and a stable Gaussian line shape with a spectral range from 300 to 450 nm at better than 0.5 nm resolution, suitable for a number of typical DOAS applications.

  11. Optical absorption spectrum and electronic structure of multiferroic hexagonal YMnO3 compound

    Science.gov (United States)

    Lima, A. F.; Lalic, M. V.

    2017-02-01

    Optical absorption (OA) spectrum and electronic structure of the hexagonal YMnO3 compound have been investigated by employment of the first-principles calculations based on density functional theory. The calculations were performed upon the ferroelectric structure of the YMnO3, by testing various approximations of the exchange-correlation effects between the Mn d-electrons and considering two types of magnetic ordering of the Mn sub-lattice: (1) collinear anti-ferromagnetic order of the G-type and (2) non-collinear antiferromagnetic order that correspond to magnetic space group P63. The results demonstrate that satisfactory agreement between the theoretical and the experimental OA spectrum can be achieved only if both non-collinear anti-ferromagnetic order of the Mn spins and strong correlations between the Mn d-electrons are taken into account. The latter is found to be best described by effective Hubbard parameter Ueff = 2.55 eV. The principal features of the OA spectrum are interpreted in terms of calculated electronic structure. It is found that the most important, threshold 1.6 eV OA peak is generated by electron transitions from strongly hybridized occupied Mn d- and its neighboring in-plane O p-states to unoccupied Mn d-states. It is also concluded that the electronic gap (calculated as ∼1.1 eV) should be smaller than the optical one (∼1.6 eV).

  12. Vacuum-UV spectroscopy of interstellar ice analogs. II. Absorption cross-sections of nonpolar ice molecules

    CERN Document Server

    Cruz-Diaz, G A; Chen, Y -J; Yih, T -S

    2014-01-01

    Dust grains in cold circumstellar regions and dark-cloud interiors at 10-20 K are covered by ice mantles. A nonthermal desorption mechanism is invoked to explain the presence of gas-phase molecules in these environments, such as the photodesorption induced by irradiation of ice due to secondary ultraviolet photons. To quantify the effects of ice photoprocessing, an estimate of the photon absorption in ice mantles is required. In a recent work, we reported the vacuum-ultraviolet (VUV) absorption cross sections of nonpolar molecules in the solid phase. The aim was to estimate the VUV-absorption cross sections of nonpolar molecular ice components, including CH4, CO2, N2, and O2. The column densities of the ice samples deposited at 8 K were measured in situ by infrared spectroscopy in transmittance. VUV spectra of the ice samples were collected in the 120-160 nm (10.33-7.74 eV) range using a commercial microwave-discharged hydrogen flow lamp. We found that, as expected, solid N2 has the lowest VUV-absorption cros...

  13. Absorption-Dominated Electromagnetic Wave Suppressor Derived from Ferrite-Doped Cross-Linked Graphene Framework and Conducting Carbon.

    Science.gov (United States)

    Biswas, Sourav; Arief, Injamamul; Panja, Sujit Sankar; Bose, Suryasarathi

    2017-01-25

    To minimize electromagnetic (EM) pollution, two key parameters, namely, intrinsic wave impedance matching and intense absorption of incoming EM radiation, must satisfy the utmost requirements. To target these requirements, soft conducting composites consisting of binary blends of polycarbonate (PC) and poly(vinylidene fluoride) (PVDF) were designed with doped multiwalled carbon nanotubes (MWCNTs) and a three-dimensional cross-linked graphene oxide (GO) framework doped with ferrite nanoparticles. The doping of α-MnO2 onto the MWCNTs ensured intrinsic wave impedance matching in addition to providing conducting pathways, and the ferrite-doped cross-linked GO facilitated the enhanced attenuation of the incoming EM radiation. This unique combination of magnetodielectric coupling led to a very high electromagnetic shielding efficiency (SE) of -37 dB at 18 GHz, dominated by absorption-driven shielding. The promising results from the composites further motivated us to rationally stack individual composites into a multilayer architecture following an absorption-multiple reflection-absorption pathway. This resulted in an impressive SE of -57 dB for a thin shield of 0.9-mm thickness. Such a high SE indicates >99.999% attenuation of the incoming EM radiation, which, together with the improvement in structural properties, validates the potential of these materials in terms of applications in cost-effective and tunable solutions.

  14. Intraband Absorption In Gaas-(ga,al)as Variably Spaced Semiconductor Superlattices Under Crossed Electric And Magnetic Fields

    OpenAIRE

    Reyes-Gomez, E; Raigoza, N; Oliveira, LE

    2013-01-01

    A theoretical study of the intraband absorption properties of GaAs-Ga1-xAlxAs variably spaced semiconductor superlattices under crossed magnetic and electric fields is presented. Calculations are performed for the applied electric field along the growth-axis direction, whereas the magnetic field is considered parallel to the heterostructure layers. By defining a critical electric field so that the heterostructure energy levels are aligned in the absence of the applied magnetic fields, one fin...

  15. Characterization of ion-assisted induced absorption in A-Si thin-films used for multivariate optical computing

    Science.gov (United States)

    Nayak, Aditya B.; Price, James M.; Dai, Bin; Perkins, David; Chen, Ding Ding; Jones, Christopher M.

    2015-06-01

    Multivariate optical computing (MOC), an optical sensing technique for analog calculation, allows direct and robust measurement of chemical and physical properties of complex fluid samples in high-pressure/high-temperature (HP/HT) downhole environments. The core of this MOC technology is the integrated computational element (ICE), an optical element with a wavelength-dependent transmission spectrum designed to allow the detector to respond sensitively and specifically to the analytes of interest. A key differentiator of this technology is it uses all of the information present in the broadband optical spectrum to determine the proportion of the analyte present in a complex fluid mixture. The detection methodology is photometric in nature; therefore, this technology does not require a spectrometer to measure and record a spectrum or a computer to perform calculations on the recorded optical spectrum. The integrated computational element is a thin-film optical element with a specific optical response function designed for each analyte. The optical response function is achieved by fabricating alternating layers of high-index (a-Si) and low-index (SiO2) thin films onto a transparent substrate (BK7 glass) using traditional thin-film manufacturing processes (e.g., ion-assisted e-beam vacuum deposition). A proprietary software and process are used to control the thickness and material properties, including the optical constants of the materials during deposition to achieve the desired optical response function. The ion-assisted deposition is useful for controlling the densification of the film, stoichiometry, and material optical constants as well as to achieve high deposition growth rates and moisture-stable films. However, the ion-source can induce undesirable absorption in the film; and subsequently, modify the optical constants of the material during the ramp-up and stabilization period of the e-gun and ion-source, respectively. This paper characterizes the unwanted

  16. Spectral studies of ocean water with space-borne sensor SCIAMACHY using Differential Optical Absorption Spectroscopy (DOAS

    Directory of Open Access Journals (Sweden)

    M. Vountas

    2007-09-01

    Full Text Available Methods enabling the retrieval of oceanic parameter from the space borne instrumentation Scanning Imaging Absorption Spectrometer for Atmospheric ChartographY (SCIAMACHY using Differential Optical Absorption Spectroscopy (DOAS are presented. SCIAMACHY onboard ENVISAT measures back scattered solar radiation at a spectral resolution (0.2 to 1.5 nm. The DOAS method was used for the first time to fit modelled Vibrational Raman Scattering (VRS in liquid water and in situ measured phytoplankton absorption reference spectra to optical depths measured by SCIAMACHY. Spectral structures of VRS and phytoplankton absorption were clearly found in these optical depths. Both fitting approaches lead to consistent results. DOAS fits correlate with estimates of chlorophyll concentrations: low fit factors for VRS retrievals correspond to large chlorophyll concentrations and vice versa; large fit factors for phytoplankton absorption correspond with high chlorophyll concentrations and vice versa. From these results a simple retrieval technique taking advantage of both measurements is shown. First maps of global chlorophyll concentrations were compared to the corresponding MODIS measurements with very promising results. In addition, results from this study will be used to improve atmospheric trace gas DOAS-retrievals from visible wavelengths by including these oceanographic signatures.

  17. Two instruments based on differential optical absorption spectroscopy (DOAS) to measure accurate ammonia concentrations in the atmosphere

    NARCIS (Netherlands)

    Volten, H.; Bergwerff, J.B.; Haaima, M.; Lolkema, D.E.; Berkhout, A.J.C.; Hoff, G.R.; Potma, C.J.M.; Wichink Kruit, R.J.; Pul, van W.A.J.; Swart, D.P.J.

    2012-01-01

    We present two Differential Optical Absorption Spectroscopy (DOAS) instruments built at RIVM: the RIVM DOAS and the miniDOAS. Both instruments provide virtually interference-free measurements of NH3 concentrations in the atmosphere, since they measure over an open path, without suffering from inlet

  18. Electric field effects on the intersubband optical absorptions and refractive index in double-electron quantum dots

    Energy Technology Data Exchange (ETDEWEB)

    Lu Liangliang; Xie Wenfang, E-mail: lll516946435@126.com [Department of Physics, College of Physics and Electronic Engineering, Guangzhou University, Guangzhou 510006 (China)

    2011-08-01

    The linear and nonlinear optical properties such as optical absorption and refractive index change associated with intersubband transitions in a two-electron quantum dot (QD) in the presence of an external electric field have been investigated theoretically by using the perturbation method. The exchange force, which is a strictly quantum mechanical phenomenon, has also been considered. Numerical results on typical GaAs/AlGaAs materials show that an increase of the electric field decreases the oscillator strengths, the peak positions of absorption coefficients as well as the refractive index changes. Additionally, an increase of the confinement frequency (dot size) increases (decreases) the absorption coefficients but does not significantly affect the refractive index changes. It is also observed that the intensity of the illumination and the relaxation time have drastic effects on nonlinear optical properties. Finally, we note that the optical absorption coefficients and refractive index changes of two electrons are about five times higher than that of a one-electron QD.

  19. Donor impurity-related intraband optical absorption in a single quantum ring: Hydrostatic pressure and intense laser field effects

    Science.gov (United States)

    Barseghyan, M. G.

    2016-10-01

    The simultaneous influence of hydrostatic pressure and intense laser field on hydrogenic donor impurity states and intraband optical absorption has been investigated in GaAs/Ga_{1-tilde{x}}Al_{tilde{x}}As quantum ring. The one-electron energy spectrum and wave functions have been found using the effective mass approximation and exact diagonalization technique. The intraband absorption coefficient is calculated for different values of the hydrostatic pressure, intense laser field parameter and different locations of hydrogenic donor impurity. The simultaneous influence of hydrostatic pressure and intense laser field shows that while the increment of the first one leads only to the blueshift of the absorption spectrum, the augmentation of the second one makes the redshift. In addition, both blueshift and redshift of the spectrum have been obtained with the changes of impurity location. The obtained theoretical results indicate good controlling means of the optical spectrum of ring-like structures by the combined influence of the considered factors.

  20. Poynting vector in transfer-matrix formalism for the calculation of light absorption profile in stratified isotropic optical media.

    Science.gov (United States)

    Deparis, Olivier

    2011-10-15

    In spite of the fact that solutions to Maxwell's equations in stratified isotropic optical media are well known, it appears that an explicit expression of the Poynting vector flux spatial evolution inside such a medium has not been derived so far. Based on exact electromagnetic field solutions in the transfer-matrix formalism, I derive such an expression and show that, due to the presence of counterpropagating waves in the medium, an additional contribution to the flux appears that exists only in optically absorbing layers and arises from the interference between these waves. Based on this theory, the concept of incremental absorption is introduced for the calculation of the light absorption profile along the stratification direction. As an illustration of this concept, absorption profiles in a Si-based thin-film tandem solar cell are predicted at typical wavelengths.

  1. Third-order nonlinear optical properties of spin-coating films containing benzo[α]phenoxazinium: from reverse saturated to saturated absorptions

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Fei [College of Chemistry, Chemical Engineering and Material Science, Soochow University, 199 Ren' Ai Road, Suzhou 215123 (China); Fang, Yu [School of Physical Science and Technology, Soochow University, 1 Shizi Street, Suzhou 215006 (China); Sun, Ru; Guo, Xiao-Zhi [College of Chemistry, Chemical Engineering and Material Science, Soochow University, 199 Ren' Ai Road, Suzhou 215123 (China); Song, Ying-Lin [School of Physical Science and Technology, Soochow University, 1 Shizi Street, Suzhou 215006 (China); Ge, Jian-Feng, E-mail: ge_jianfeng@hotmail.com [College of Chemistry, Chemical Engineering and Material Science, Soochow University, 199 Ren' Ai Road, Suzhou 215123 (China); Jiangsu Key Laboratory of Medical Optics, Suzhou Institute of Biomedical Engineering and Technology, Chinese Academy of Sciences, Suzhou 215163 (China)

    2015-08-31

    The optical films based on poly(4-vinylphenol) and benzo[α]phenoxazinium dye with a long alkyl chain were obtained by spin-coating, and their optical properties are reported in this paper. UV–vis absorptions of the optical films showed that the absorption maxima were shifted about 40 nm by the influence of dye aggregation with increasing dye ratio. The third-order nonlinear optical properties of films were tested by Z-scan technique with a picosecond laser beam at 532 nm. The third-order nonlinear optical susceptibilities and second hyperpolarizabilities were up to 10{sup −10} and 10{sup −32} esu respectively. Meanwhile, the third-order nonlinear absorptions transformed from reverse saturated absorptions to saturated absorptions with increasing ratios of dye in doped films. The result of aggregation induced adjustable third-order nonlinear absorption can be confirmed from their TEM images. - Highlights: • Benzo[α]phenoxazinium containing optical films with poly(4-vinylphenol). • Optical property was influenced by dye aggregation. • The third-order nonlinear absorptions transformed from reverse saturated absorptions to saturated absorptions with increasing ratios of dye.

  2. Enhanced optical cross section via collective coupling of atomic dipoles in a 2D array

    CERN Document Server

    Bettles, Robert J; Adams, Charles S

    2015-01-01

    Enhancing the optical cross section is an enticing goal in light-matter interactions, due to its fundamental role in quantum and non-linear optics. Here, we show how dipolar interactions can suppress off-axis scattering in a two-dimensional atomic array, leading to a subradiant collective mode where the optical cross section is enhanced by an order of magnitude. As a consequence, it is possible to attain an optical depth which implies high fidelity extinction, from a monolayer. Using realistic experimental parameters, we also model how lattice vacancies and the atomic trapping depth affect the transmission, concluding that such high extinction should be possible, using current experimental techniques.

  3. A cross-stacked plasmonic nanowire network for high-contrast femtosecond optical switching

    Science.gov (United States)

    Lin, Yuanhai; Zhang, Xinping; Fang, Xiaohui; Liang, Shuyan

    2016-01-01

    We report an ultrafast optical switching device constructed by stacking two layers of gold nanowires into a perpendicularly crossed network, which works at a speed faster than 280 fs with an on/off modulation depth of about 22.4%. The two stacks play different roles in enhancing consistently the optical switching performance due to their different dependence on the polarization of optical electric fields. The cross-plasmon resonance based on the interaction between the perpendicularly stacked gold nanowires and its Fano-coupling with Rayleigh anomaly is the dominant mechanism for such a high-contrast optical switching device.

  4. The UV-visible absorption cross-sections of IONO2

    Directory of Open Access Journals (Sweden)

    J. C. Mössinger

    2002-01-01

    Full Text Available The UV-visible absorption spectrum of gaseous IONO2 has been measured over the wavelength range 245--415 nm using the technique of laser photolysis with time-resolved UV-visible absorption spectroscopy. IONO2 was produced in situ in the gas phase by laser flash photolysis of NO2/CF3I/N2 mixtures. Post flash spectra were deconvolved to remove contributions to the observed absorption from other reactant and product species. The resulting spectrum attributed to IONO2 consists of several overlapping broad absorption bands. Assuming a quantum yield of unity for IONO2 photolysis, model calculations show that during sunlit hours at noon, 53° N, the first order solar photolysis rate coefficient (J value for IONO2 is 4.0 x 10-2 s-1.

  5. The UV-visible absorption cross-sections of IONO2

    Directory of Open Access Journals (Sweden)

    R. A. Cox

    2002-06-01

    Full Text Available The UV-visible absorption spectrum of gaseous IONO2 has been measured over the wavelength range 245--415 nm using the technique of laser photolysis with time-resolved UV-visible absorption spectroscopy. IONO2 was produced in situ in the gas phase by laser flash photolysis of NO2/CF3I/N2 mixtures. Post-flash spectra were deconvolved to remove contributions to the observed absorption from other reactant and product species. The resulting spectrum attributed to IONO2 consists of several overlapping broad absorption bands. Assuming a quantum yield of unity for IONO2 photolysis, model calculations show that during sunlit hours at noon, 53° N, the first order solar photolysis rate coefficient (J value for IONO2 is 4.6 x 10-2 s-1.

  6. EMPIRICAL LINE LISTS AND ABSORPTION CROSS SECTIONS FOR METHANE AT HIGH TEMPERATURES

    Energy Technology Data Exchange (ETDEWEB)

    Hargreaves, R. J.; Bernath, P. F.; Dulick, M. [Department of Chemistry and Biochemistry, Old Dominion University, 4541 Hampton Boulevard, Norfolk, VA 23529 (United States); Bailey, J., E-mail: rhargrea@odu.edu [School of Physics, University of New South Wales, Sydney, NSW 2052 (Australia)

    2015-11-01

    Hot methane is found in many “cool” sub-stellar astronomical sources including brown dwarfs and exoplanets, as well as in combustion environments on Earth. We report on the first high-resolution laboratory absorption spectra of hot methane at temperatures up to 1200 K. Our observations are compared to the latest theoretical spectral predictions and recent brown dwarf spectra. The expectation that millions of weak absorption lines combine to form a continuum, not seen at room temperature, is confirmed. Our high-resolution transmittance spectra account for both the emission and absorption of methane at elevated temperatures. From these spectra, we obtain an empirical line list and continuum that is able to account for the absorption of methane in high temperature environments at both high and low resolution. Great advances have recently been made in the theoretical prediction of hot methane, and our experimental measurements highlight the progress made and the problems that still remain.

  7. Empirical line lists and absorption cross sections for methane at high temperature

    CERN Document Server

    Hargreaves, Robert J; Bailey, Jeremy; Dulick, Michael

    2015-01-01

    Hot methane is found in many "cool" sub-stellar astronomical sources including brown dwarfs and exoplanets, as well as in combustion environments on Earth. We report on the first high-resolution laboratory absorption spectra of hot methane at temperatures up to 1200 K. Our observations are compared to the latest theoretical spectral predictions and recent brown dwarf spectra. The expectation that millions of weak absorption lines combine to form a continuum, not seen at room temperature, is confirmed. Our high-resolution transmittance spectra account for both the emission and absorption of methane at elevated temperatures. From these spectra, we obtain an empirical line list and continuum that is able to account for the absorption of methane in high temperature environments at both high and low resolution. Great advances have recently been made in the theoretical prediction of hot methane, and our experimental measurements highlight the progress made and the problems that still remain.

  8. Quantum-Confined and Enhanced Optical Absorption of Colloidal PbS Quantum Dots at Wavelengths with Expected Bulk Behavior.

    Science.gov (United States)

    Debellis, Doriana; Gigli, Giuseppe; Ten Brinck, Stephanie; Infante, Ivan; Giansante, Carlo

    2017-02-08

    Nowadays it is well-accepted to attribute bulk-like optical absorption properties to colloidal PbS quantum dots (QDs) at wavelengths above 400 nm. This assumption permits to describe PbS QD light absorption by using bulk optical constants and to determine QD concentration in colloidal solutions from simple spectrophotometric measurements. Here we demonstrate that PbS QDs experience the quantum confinement regime across the entire near UV-vis-NIR spectral range, therefore also between 350 and 400 nm already proposed to be sufficiently far above the band gap to suppress quantum confinement. This effect is particularly relevant for small PbS QDs (with diameter of ≤4 nm) leading to absorption coefficients that largely differ from bulk values (up to ∼40% less). As a result of the broadband quantum confinement and of the high surface-to-volume ratio peculiar of nanocrystals, suitable surface chemical modification of PbS QDs is exploited to achieve a marked, size-dependent enhancement of the absorption coefficients compared to bulk values (up to ∼250%). We provide empirical relations to determine the absorption coefficients at 400 nm of as-synthesized and ligand-exchanged PbS QDs, accounting for the broadband quantum confinement and suggesting a heuristic approach to qualitatively predict the ligand effects on the optical absorption properties of PbS QDs. Our findings go beyond formalisms derived from Maxwell Garnett effective medium theory to describe QD optical properties and permit to spectrophotometrically calculate the concentration of PbS QD solutions avoiding underestimation due to deviations from the bulk. In perspective, we envisage the use of extended π-conjugated ligands bearing electronically active substituents to enhance light-harvesting in QD solids and suggest the inadequacy of the representation of ligands at the QD surface as mere electric dipoles.

  9. Excited state assisted three-photon absorption based optical limiting in nanocrystalline Cu2Se and FeSe2

    Science.gov (United States)

    Anand, Benoy; Molli, Muralikrishna; Aditha, Saikiran; Mimani Rattan, Tanu; Siva Sankara Sai, S.; Kamisetti, Venkataramaniah

    2013-09-01

    Transition metal selenides (FeSe2 and Cu2Se) are synthesized by the hydrothermal co-reduction method. XRD results revealed the crystalline nature of their single phase and the elemental compositions are obtained using EDS. TEM images of the as-prepared samples show the formation of nanorods of 10-20 nm diameter in case of iron selenide and nanoparticles of 10-35 nm diameter in case of copper selenide. The energy bandgap values are calculated using tauc plots obtained from UV-Visible absorption spectra. The open aperture Z-scan measurements carried out using 5 ns pulses at 532 nm revealed that the samples showed excellent optical limiting behavior owing to strong nonlinear absorption (NLA). Through numerical simulations, the mechanism of NLA is found to be effective three-photon absorption which has significant contribution from excited state absorption.

  10. Influence of nanoporous aluminum oxide interlayer on the optical absorptance of black electroless nickel–phosphorus coating

    Energy Technology Data Exchange (ETDEWEB)

    Ebrahimi, Fatemeh, E-mail: f.ebrahimi@ma.iut.ac.ir; Yazdi, Saeed Shirmohammadi, E-mail: s.shirmohammadiyazdi@ma.iut.ac.ir; Najafabadi, Mehdi Hosseini, E-mail: m.najafabadi@ma.iut.ac.ir; Ashrafizadeh, Fakhreddin, E-mail: ashrafif@cc.iut.ac.ir

    2015-10-01

    This paper introduces a technique to make an ultra-black surface by employing nanoporous anodized aluminum oxide as a template and deposition of nickel–phosphorus nanowires by the electroless process. The optical properties were compared with two other processes; a conventional black Ni–P deposition and a nickel electro-coloring process, on aluminum substrate. Surface morphologies of the samples were examined by field emission scanning electron microscope and elemental analysis of the coatings was performed by the energy dispersive spectroscopy method. Optical properties of surfaces were determined by spectrophotometry and infrared spectroscopy techniques. In addition, optical characteristics of the coated surfaces were evaluated by calculation of absorption and emission coefficients of the surfaces. The results showed that ultra-black duplex coating possessed an absorption coefficient higher than 99%, while emission coefficient decreased about 6% compared with simple black electroless Ni–P. Calculation of ξ factor indicated that a value of 5.1 proved that optical properties in the duplex coated sample had a significant improvement. - Highlights: • Nickel nanowires were synthesized in porous template by electroless plating. • Nickel formed a network of nanowires on the surface. • Effect of porous structure on light absorption of Ni–P coating was studied. • Duplex coating showed better optical properties compared to other methods.

  11. Optical characterization of the nematic lyotropic chromonic liquid crystals: light absorption, birefringence, and scalar order parameter.

    Science.gov (United States)

    Nastishin, Yu A; Liu, H; Schneider, T; Nazarenko, V; Vasyuta, R; Shiyanovskii, S V; Lavrentovich, O D

    2005-10-01

    We report on the optical properties of the nematic (N) phase formed by lyotropic chromonic liquid crystals (LCLCs) in well aligned planar samples. LCLCs belong to a broad class of materials formed by one-dimensional molecular self-assembly and are similar to other systems such as "living polymers" and "wormlike micelles." We study three water soluble LCLC forming materials: disodium chromoglycate, a derivative of indanthrone called Blue 27, and a derivative of perylene called Violet 20. The individual molecules have a planklike shape and assemble into rodlike aggregates that form the phase once the concentration exceeds about 0.1 M. The uniform surface alignment of the N phase is achieved by buffed polyimide layers. According to the light absorption anisotropy data, the molecular planes are on average perpendicular to the aggregate axes and thus to the nematic director. We determined the birefringence of these materials in the N and biphasic N-isotropic (I) regions and found it to be negative and significantly lower in the absolute value as compared to the birefringence of typical thermotropic low-molecular-weight nematic materials. In the absorbing materials Blue 27 and Violet 20, the wavelength dependence of birefringence is nonmonotonic because of the effect of anomalous dispersion near the absorption bands. We describe positive and negative tactoids formed as the nuclei of the new phase in the biphasic N-I region (which is wide in all three materials studied). Finally, we determined the scalar order parameter of the phase of Blue 27 and found it to be relatively high, in the range 0.72-0.79, which puts the finding into the domain of general validity of the Onsager model. However, the observed temperature dependence of the scalar order parameter points to the importance of factors not accounted for in the athermal Onsager model, such as interaggregate interactions and the temperature dependence of the aggregate length.

  12. Optical Absorption of Impurities and Defects in Semiconducting Crystals Electronic Absorption of Deep Centres and Vibrational Spectra

    CERN Document Server

    Pajot, Bernard

    2013-01-01

    This book outlines, with the help of several specific examples, the important role played by absorption spectroscopy in the investigation of deep-level centers introduced in semiconductors and insulators like diamond, silicon, germanium and gallium arsenide by high-energy irradiation, residual impurities, and defects produced during crystal growth. It also describes the crucial role played by vibrational spectroscopy to determine the atomic structure and symmetry of complexes associated with light impurities like hydrogen, carbon, nitrogen and oxygen, and as a tool for quantitative analysis of these elements in the materials.

  13. Autonomous long-term trace gas measurements using Long-Path Differential Optical Absorption Spectroscopy

    Science.gov (United States)

    Nasse, Jan-Marcus; Pöhler, Denis; Eger, Philipp; Schmitt, Stefan; Friess, Udo; Platt, Ulrich

    2017-04-01

    Long-Path DOAS (Differential Optical Absorption Spectroscopy) is a well-established, very specific and reliable remote sensing technique for the observation of a large variety of trace gases. So far DOAS has been mostly applied in the UV-Vis spectral region; detectable species are for example ClO, OClO, BrO, OBrO, IO, OIO, I2, OIO, O3, formaldehyde, glyoxal, NO2, H2O, O4, or SO2. In the Long Path DOAS setup, a dedicated light source and a measurement path of up to 10 km between a telescope and a reflector yield continuous path averaged concentrations independent of solar radiation and still on scales below the ground pixel sizes of satellite instruments. Here we present an advanced LP-DOAS instrument incorporating several technical improvements to a setup that allows for the first time autonomous and continuous long term measurements with very high measurement accuracy necessary for the measurement of low trace gas concentrations. The setup uses an optical fiber bundle in the telescope for transmission and reception of the measurement signal. The traditional Xe-arc lamp has been replaced by a Laser Driven Light Source with a long life time and very good optical stability. Using this light source also allows an improved wavelength selective coupling from light source into the fiber which reduces stray light. The coupling and configuration of the optical fiber was optimised compared to previous designs to maximise light throughput and reduce stray light. Additionally, the fibers were treated in order to reduce noise caused by irregular grating illumination. These changes drastically lower detection limits (e.g. to 1 pptv for BrO or 8 pptv for ClO) and improve the long-term reliability. To facilitate an autonomous operation, the measurement software incorporates features such as an automatic reflector search and intensity optimisation as well as a selection from the available measurement paths based on atmospheric visibility. Since January 2016, we are successfully

  14. Optical loss and crosstalk in multimode photolithographically fabricated polyacrylate polymer waveguide crossings

    Science.gov (United States)

    Baghsiahi, Hadi; Wang, Kai; Selviah, David R.

    2014-03-01

    Complex interconnection patterns in electrical PCBs have to use multiple layers of copper tracks. However, the same interconnections can be made in a single layer using optical waveguides as they cross on the same layer. Waveguide crossings where two waveguides intersect in the same optical layer are particularly important components as they offer OPCB layout designers additional flexibility to solve layout problems such as routing around cutout areas, electrical components and other obstacles on an OPCB. Use of waveguide crossings can also help to avoid sharp bends in the design as these bends are an important cause of optical loss. Despite all of the advantages of waveguide crossings, and although most of the light travels along the intended waveguide, a proportion of the optical power in one waveguide will couple into the crossing waveguide at each intersection point or couple out of the original waveguide and into the cladding. This coupling phenomenon causes optical loss and crosstalk in the system. In this paper, the results of an investigation of the optical loss due to the crossing of multimode polymer waveguide, fabricated on FR4 printed circuit boards, PCBs, as a function of crossing angles are presented theoretically and experimentally. The results from ray tracing simulation is compared with the experiment results and the contrast is discussed.

  15. Physical and optical absorption studies of Fe{sup 3+} - ions doped lithium borate glasses containing certain alkaline earths

    Energy Technology Data Exchange (ETDEWEB)

    Bhogi, Ashok [VNR Vignana Jyothi Institute of Engineering and Technology, Hyderabad, Telangana (India); Kumar, R. Vijaya [School of Physics, University of Hyderabad, Hyderabad, Telangana (India); Kistaiah, P., E-mail: pkistaiah@yahoo.com [Department of Physics, Osmania University, Hyderabad, Telangana (India)

    2016-05-23

    Iron ion doped lithium borate glasses with the composition 15RO-25Li{sub 2}O-59B{sub 2}O{sub 3}-1Fe{sub 2}O{sub 3} (where R= Ca, Sr and Ba) have been prepared by the conventional melt quenching technique and characterized to investigate the physical and optical properties using XRD, density, molar volume and UV-Visible spectroscopy. The optical absorption spectra exhibit a band at around 460 nm which is assigned to {sup 6}A{sub 1g}(S) → 4E{sub g} (G) of Fe{sup 3+} ions with distorted octahedral symmetry. From ultraviolet absorption edges, the optical band gap and Urbach energies have been evaluated. The effect of alkaline earths on these properties is discussed.

  16. Physical and optical absorption studies of Fe3+ - ions doped lithium borate glasses containing certain alkaline earths

    Science.gov (United States)

    Bhogi, Ashok; Kumar, R. Vijaya; Kistaiah, P.

    2016-05-01

    Iron ion doped lithium borate glasses with the composition 15RO-25Li2O-59B2O3-1Fe2O3 (where R= Ca, Sr and Ba) have been prepared by the conventional melt quenching technique and characterized to investigate the physical and optical properties using XRD, density, molar volume and UV-Visible spectroscopy. The optical absorption spectra exhibit a band at around 460 nm which is assigned to 6A1g(S) → 4Eg (G) of Fe3+ ions with distorted octahedral symmetry. From ultraviolet absorption edges, the optical band gap and Urbach energies have been evaluated. The effect of alkaline earths on these properties is discussed.

  17. Metastable argon atom density in complex argon/acetylene plasmas determined by means of optical absorption and emission spectroscopy

    Science.gov (United States)

    Sushkov, Vladimir; Herrendorf, Ann-Pierra; Hippler, Rainer

    2016-10-01

    Optical emission and absorption spectroscopy has been utilized to investigate the instability of acetylene-containing dusty plasmas induced by growing nano-particles. The density of Ar(1s5) metastable atoms was derived by two methods: tunable diode laser absorption spectroscopy and with the help of the branching ratio method of emitted spectral lines. Results of the two techniques agree well with each other. The density of Ar(1s3) metastable atoms was also measured by means of optical emission spectroscopy. The observed growth instability leads to pronounced temporal variations of the metastable and other excited state densities. An analysis of optical line ratios provides evidence for a depletion of free electrons during the growth cycle but no indication for electron temperature variations.

  18. Optical absorption, Mössbauer, and FTIR spectroscopic studies of two blue bazzites

    Science.gov (United States)

    Taran, Michail N.; Dyar, M. Darby; Khomenko, Vladimir M.; Boesenberg, Joseph S.

    2017-07-01

    Two samples of bazzite, a very rare Sc analog of beryl, from Tørdal, Telemark, Norway and Kent, Central Kazakhstan were studied by electron microprobe, optical absorption, and Mössbauer spectroscopies; the latter sample was also studied by FTIR. Electron microprobe results show that the Norway bazzite is composed of two bazzites with slightly different FeO contents, viz. 5.66 and 5.43 wt%. The Kazakhstan sample consists of several varieties of bazzite displaying strong differences in iron, manganese, magnesium, and aluminum contents (in wt%): FeO from 2.02 to 6.73, MnO from 0.89 to 2.98, MgO from 0.37 to 1.86, and Al2O3 from 0.30 to 1.30. Mössbauer spectroscopy shows different degrees of iron oxidation. The Norway bazzite is completely Fe2+, while the Kazakhstan sample contains roughly equivalent Fe3+ and Fe2+ accommodated in the octahedral site. The difference in iron oxidation causes strong variations in the intensity of the broad optical absorption band around 13,850 cm-1, which is assigned to Fe2+ → Fe3+ IVCT; as a result, there are strong differences in the intensity of blue color. Dichroism ( E|| c ≫ E⊥ c) is much stronger in the Kazakhstan sample than in the Norway one. Intensities of the electronic spin-allowed bands of [6]Fe2+ at 8900 and 10,400 cm-1 are somewhat higher in the latter than in the former. FTIR spectra of the sample from Kent show the presence of only water type II molecules with the H-H vector perpendicular to the c-axis, in contrast to more typical beryls that always show at least weak minor bands of H2O I. This result shows that trapped water molecules in structural channels of studied bazzite occupy only sites next to or between six-membered rings centered by Na atoms. Definite structure can be observed in the vicinities of ν2 and ν3 peaks. Peaks at 1621 and 3663 cm-1 are assigned to "doubly coordinated" H2O (IId), whereas maximums at 1633 and 3643 cm-1 likely represent "singly coordinated" H2O (IIs). Interpretation of the

  19. Optical absorption, Mössbauer, and FTIR spectroscopic studies of two blue bazzites

    Science.gov (United States)

    Taran, Michail N.; Dyar, M. Darby; Khomenko, Vladimir M.; Boesenberg, Joseph S.

    2017-02-01

    Two samples of bazzite, a very rare Sc analog of beryl, from Tørdal, Telemark, Norway and Kent, Central Kazakhstan were studied by electron microprobe, optical absorption, and Mössbauer spectroscopies; the latter sample was also studied by FTIR. Electron microprobe results show that the Norway bazzite is composed of two bazzites with slightly different FeO contents, viz. 5.66 and 5.43 wt%. The Kazakhstan sample consists of several varieties of bazzite displaying strong differences in iron, manganese, magnesium, and aluminum contents (in wt%): FeO from 2.02 to 6.73, MnO from 0.89 to 2.98, MgO from 0.37 to 1.86, and Al2O3 from 0.30 to 1.30. Mössbauer spectroscopy shows different degrees of iron oxidation. The Norway bazzite is completely Fe2+, while the Kazakhstan sample contains roughly equivalent Fe3+ and Fe2+ accommodated in the octahedral site. The difference in iron oxidation causes strong variations in the intensity of the broad optical absorption band around 13,850 cm-1, which is assigned to Fe2+ → Fe3+ IVCT; as a result, there are strong differences in the intensity of blue color. Dichroism (E||c ≫ E⊥c) is much stronger in the Kazakhstan sample than in the Norway one. Intensities of the electronic spin-allowed bands of [6]Fe2+ at 8900 and 10,400 cm-1 are somewhat higher in the latter than in the former. FTIR spectra of the sample from Kent show the presence of only water type II molecules with the H-H vector perpendicular to the c-axis, in contrast to more typical beryls that always show at least weak minor bands of H2O I. This result shows that trapped water molecules in structural channels of studied bazzite occupy only sites next to or between six-membered rings centered by Na atoms. Definite structure can be observed in the vicinities of ν2 and ν3 peaks. Peaks at 1621 and 3663 cm-1 are assigned to "doubly coordinated" H2O (IId), whereas maximums at 1633 and 3643 cm-1 likely represent "singly coordinated" H2O (IIs). Interpretation of the third

  20. Effect of VO2+ ions on the EPR and optical absorption investigations of lithium sulphate monohydrate single crystals for non linear optical applications

    Science.gov (United States)

    Juliet sheela, K.; Radha Krishnan, S.; Shanmugam, V. M.; Subramanian, P.

    2017-09-01

    Electron paramagnetic resonance (EPR) and optical absorption studies of VO2+ ions in Lithium Sulphate Monohydrate (LSMH) single crystal are carried out at room temperature. Single crystal rotations in each of the three mutually orthogonal crystalline planes, ac, ab, cb indicate three different vanadyl complexes. Three VO2+ ions of EPR spectra indicate among them, that two of them have (the intense two) entered the lattice substitutionally and the third one occupies the interstitial position. From the angular variation, the spin Hamiltonian parameters are evaluated. From the optical absorption spectrum containing four selected bands and EPR data, various bonding parameters are determined and the nature of bonding in the crystal is discussed. Also Second Harmonic Generation (SHG) studies are carried out to confirm the Non Linear Optical (NLO) properties of the given material.

  1. A New Cross-Shaped Graphite Furnace with Ballast Body for Reduction of Interferences in Atomic Absorption Spectrometry

    Directory of Open Access Journals (Sweden)

    A. A. Asweisi

    2010-01-01

    Full Text Available A new crossed graphite furnace for atomic absorption spectrometry (GFAAS was designed and installed in heated graphite atomizer (HGA500 combined with Perkin-Elmer spectrometer (AAS1100. The Tungsten ballast body was inserted inside one part of the crossed furnace in a way perpendicular to light path. The analyzed sample was injected manually on the ballast body inside the cross and pushed into the measuring zone using the original inner and additional purge gas. The sample was adsorbed strongly on the ballast and evaporated and transferred with different rates at different temperatures during the temperature program allowing the separation of analyte and matrix signals. Analysis of middle volatile element such as copper and manganese in standard urine sample (seronorm 2525 showed complete separation of analyte and background signals with good sensitivity and repeatability.

  2. The application of reduced absorption cross section on the identification of the compounds with similar function-groups

    Science.gov (United States)

    Yu, Fei; Zuo, Jian; Mu, Kai-jun; Zhang, Zhen-wei; Zhang, Liang-liang; Zhang, Lei-wei; Zhang, Cun-lin

    2013-08-01

    Terahertz spectroscopy is a powerful tool for materials investigation. The low frequency vibrations were usually investigated by means of absorption coefficient regardless of the refractive index. It leads to the disregard of some inherent low-frequency vibrational information of the chemical compounds. Moreover, due to the scattering inside the sample, there are some distortions of the absorption features, so that the absorption dependent material identification is not valid enough. Here, a statistical parameter named reduced absorption cross section (RACS) is introduced. This can not only help us investigate the molecular dynamics but also distinguish one chemical compound with another which has similar function-groups. Experiments are carried out on L-Tyrosine and L-Phenylalanine and the different mass ratios of their mixtures as an example of the application of RACS. The results come out that the RACS spectrum of L-Tyrosine and L-Phenylalanine reserve the spectral fingerprint information of absorption spectrum. The log plot of RACSs of the two amino acids show power-law behavior σR(~ν) ~ (ν~α), and there is a linear relation between the wavenumber and the RACS in the double logarithmic plot. The exponents α, at the same time, are the slopes of the RACS curves in the double logarithmic plot. The big differences of the exponents α between the two amino acids and their mixtures can be seen visually from the slopes of the RACS curves. So we can use RACS analytical method to distinguish some complex compounds with similar function-groups and mixtures from another which has similar absorption peaks in THz region.

  3. Temperature-dependent absorption cross-section measurements of 1-butene (1-C4H8) in VUV and IR

    KAUST Repository

    Es-sebbar, Et-touhami

    2013-01-01

    Vacuum ultraviolet (VUV) and infrared (IR) absorption cross-section measurements of 1-butene (1-C4H8; CH2=CHCH2CH3; Butylene) are reported over the temperature range of 296-529K. The VUV measurements are performed between 115 and 205nm using synchrotron radiation as a tunable VUV light source. Fourier Transform Infrared (FTIR) spectroscopy is employed to measure absorption cross-section and band strengths in the IR region between 1.54 and 25μm (~6500-400cm-1). The measured room-temperature VUV and IR absorption cross-sections are compared with available literature data and are found to be in good agreement. The oscillator strength for the electronic transition (A1A\\'→X1A\\') around 150-205nm is determined to be 0.32±0.01.The gas temperature has a strong effect on both VUV and IR spectra. Measurements made in the VUV region show that the peak value of the band cross-section decreases and the background continuum increases with increasing gas temperature. This behavior is due to a change in the rotational and vibrational population distribution of 1-butene molecule. Similar changes in rotational population are observed in the IR spectra. Moreover, variation of the IR spectra with temperature is used to measure the enthalpy difference between syn and skew conformations of 1-butene and is found to be 0.24±0.03. kcal/mol, which is in excellent agreement with values reported in the literature. The measurements reported in this work will provide the much-needed spectroscopic information for the development of high-temperature quantitative diagnostics in combustion applications and validation of atmospheric chemistry models of extra-solar planets. © 2012 Elsevier Ltd.

  4. On the origin of pure optical rotation in twisted-cross metamaterials

    Science.gov (United States)

    Barr, Lauren E.; Díaz-Rubio, Ana; Tremain, Ben; Carbonell, Jorge; Sánchez-Dehesa, José; Hendry, Euan; Hibbins, Alastair P.

    2016-01-01

    We present an experimental and computational study of the response of twisted-cross metamaterials that provide near dispersionless optical rotation across a broad band of frequencies from 19 GHz to 37 GHz. We compare two distinct geometries: firstly, a bilayer structure comprised of arrays of metallic crosses where the crosses in the second layer are twisted about the layer normal; and secondly where the second layer is replaced by the complementary to the original, i.e. an array of cross-shaped holes. Through numerical modelling we determine the origin of rotatory effects in these two structures. In both, pure optical rotation occurs in a frequency band between two transmission minima, where alignment of electric and magnetic dipole moments occurs. In the cross/cross metamaterial, the transmission minima occur at the symmetric and antisymmetric resonances of the coupled crosses. By contrast, in the cross/complementary-cross structure the transmission minima are associated with the dipole and quadrupole modes of the cross, the frequencies of which appear intrinsic to the cross layer alone. Hence the bandwidth of optical rotation is found to be relatively independent of layer separation. PMID:27457405

  5. On the origin of pure optical rotation in twisted-cross metamaterials.

    Science.gov (United States)

    Barr, Lauren E; Díaz-Rubio, Ana; Tremain, Ben; Carbonell, Jorge; Sánchez-Dehesa, José; Hendry, Euan; Hibbins, Alastair P

    2016-07-26

    We present an experimental and computational study of the response of twisted-cross metamaterials that provide near dispersionless optical rotation across a broad band of frequencies from 19 GHz to 37 GHz. We compare two distinct geometries: firstly, a bilayer structure comprised of arrays of metallic crosses where the crosses in the second layer are twisted about the layer normal; and secondly where the second layer is replaced by the complementary to the original, i.e. an array of cross-shaped holes. Through numerical modelling we determine the origin of rotatory effects in these two structures. In both, pure optical rotation occurs in a frequency band between two transmission minima, where alignment of electric and magnetic dipole moments occurs. In the cross/cross metamaterial, the transmission minima occur at the symmetric and antisymmetric resonances of the coupled crosses. By contrast, in the cross/complementary-cross structure the transmission minima are associated with the dipole and quadrupole modes of the cross, the frequencies of which appear intrinsic to the cross layer alone. Hence the bandwidth of optical rotation is found to be relatively independent of layer separation.

  6. A time-resolved single-pass technique for measuring optical absorption coefficients of window materials under 100 GPa shock pressures.

    Science.gov (United States)

    Li, Jun; Zhou, Xianming; Li, Jiabo

    2008-12-01

    An experimental method was developed to perform time-resolved, single-pass optical absorption measurements and to determine absorption coefficients of window materials under strong shock compression up to approximately 200 GPa. Experimental details are described of (i) a configuration to generate an in situ dynamic, bright, optical source and (ii) a sample assembly with a lithium fluoride plate to essentially eliminate heat transfer from the hot radiator into the specimen and to maintain a constant optical source within the duration of the experiment. Examples of measurements of optical absorption coefficients of several initially transparent single crystal materials at high shock pressures are presented.

  7. Temperature-dependent absorption cross sections of ozone in the Wulf-Chappuis band at 759-768 nm

    Science.gov (United States)

    Enami, Shinichi; Ueda, Junya; Nakano, Yukio; Hashimoto, Satoshi; Kawasaki, Masahiro

    2004-03-01

    Absorption cross sections of ozone in the Wulf-Chappuis band at 759-768 nm have been determined using cavity ring-down spectroscopy at 215-298 K. Precise measurements at 762.07 and 764.47 nm revealed a slight temperature dependence of the absorption cross sections: ?(762.07 nm, 298 K) = (2.86 ± 0.04) × 10-22 cm2 molecule-1; ?(762.07 nm, 215 K) = (2.62 ± 0.04) × 10-22; ?(764.47 nm, 296 K) = (2.70 ± 0.03) × 10-22; and ?(764.47 nm, 214 K) = (2.44 ± 0.03) × 10-22. Results at 762.07 nm are indistinguishable within the experimental uncertainties from those reported by [1994]. Results from the present work facilitate a more accurate retrieval of atmospheric temperature, cloud height, and cloud coverage data from satellite measurements of absorption by O2 in the A band around 761 nm.

  8. Quantum atomic lithography via cross-cavity optical Stern-Gerlach setup

    Science.gov (United States)

    Máximo, C. E.; Batalhão, T. B.; Bachelard, R.; de Moraes Neto, G. D.; de Ponte, M. A.; Moussa, M. H. Y.

    2014-10-01

    We present a fully quantum scheme to perform 2D atomic lithography based on a cross-cavity optical Stern-Gerlach setup: an array of two mutually orthogonal cavities crossed by an atomic beam perpendicular to their optical axes, which is made to interact with two identical modes. After deriving an analytical solution for the atomic momentum distribution, we introduce a protocol allowing us to control the atomic deflection by manipulating the amplitudes and phases of the cavity field states.

  9. Microwave photonic true time delay based on cross gain modulation in semiconductor optical amplifiers

    DEFF Research Database (Denmark)

    Xue, Weiqi; Mørk, Jesper

    2010-01-01

    We experimentally demonstrate microwave time delays in a semiconductor optical amplifier by cross gain modulation. In the counter-propagation configuration, ~10.5ps tunable true time delay over a microwave bandwidth of several tens of GHz is obtained.......We experimentally demonstrate microwave time delays in a semiconductor optical amplifier by cross gain modulation. In the counter-propagation configuration, ~10.5ps tunable true time delay over a microwave bandwidth of several tens of GHz is obtained....

  10. HST hot Jupiter Transmission Spectral Survey: A detection of Na and strong optical absorption in HAT-P-1b

    CERN Document Server

    Nikolov, N; Pont, F; Burrows, A S; Fortney, J J; Ballester, G E; Evans, T M; Huitson, C M; Wakeford, H R; Wilson, P A; Aigrain, S; Deming, D; Gibson, N P; Henry, G W; Knutson, H; Etangs, A Lecavelier des; Showman, A P; Vidal-Madjar, A; Zahnle, K

    2013-01-01

    We present an optical to near-infrared transmission spectrum of the hot Jupiter HAT-P-1b, based on HST observations, covering the spectral regime from 0.29 to 1.027{\\mu}m with STIS, which is coupled with a recent WFC3 transit (1.087 to 1.687{\\mu}m). We derive refined physical parameters of the HAT-P-1 system, including an improved orbital ephemeris. The transmission spectrum shows a strong absorption signature shortward of 0.55{\\mu}m, with a strong blueward slope into the near-ultraviolet. We detect atmospheric sodium absorption at a 3.3{\\sigma} significance level, but find no evidence for the potassium feature. The red data implies a marginally flat spectrum with a tentative absorption enhancement at wavelength longer than ~0.85{\\mu}m. The STIS and WFC3 spectra differ significantly in absolute radius level (4.3 +/- 1.6 pressure scale heights), implying strong optical absorption in the atmosphere of HAT-P-1b. The optical to near-infrared difference cannot be explained by stellar activity, as simulta- neous st...

  11. Novel Nb3O7F/WS2 hybrid nanomaterials with enhanced optical absorption and photocatalytic activity

    Science.gov (United States)

    Huang, Fei; Li, Zhen; Yan, Aihua; Zhao, Hui; Feng, Hao; Wang, Yuehua

    2017-07-01

    Coping with increasing environmental issues, niobium oxyfluoride (Nb3O7F), as a novel semiconductor, is a promising photocatalyst due to its outstanding electronic and optoelectronic properties. However, the photocatalytic performance of Nb3O7F is restricted in practical application due to its weak optical absorption and low carrier separation. In this work, Nb3O7F/WS2 hybrids with superior optical absorption and photocatalytic activity have been successfully synthesized by a facile two-step sol-hydrothermal technique. UV-vis spectra show that WS2 not only exhibits enhanced optical absorption in the range of 420-1100 nm but extends the absorption edge, and tends to narrow the band gap of the Nb3O7F photocatalyst. Photocatalytic experiments indicate that introducing WS2 into Nb3O7F markedly enhances the photocatalytic activity in the degradation of methylene blue dyes under visible-light irradiation. Nb3O7F/WS2 photocatalysts exhibit the highest activity with 98.9% decoloration efficiency in 70 min, while pure Nb3O7F only achieves 67.9% in the same time and achieves its final decoloration ratio after 150 min. The excellent photocatalytic activity can be directly ascribed to more exposed active sites, higher carrier separation efficiency, and faster carrier transfer. The results may open up a new avenue for the design and preparation of novel and highly efficient photocatalysts.

  12. Reverse saturable absorption studies in polymerized indole - Effect of polymerization in the phenomenal enhancement of third order optical nonlinearity

    Science.gov (United States)

    Jayakrishnan, K.; Joseph, Antony; Bhattathiripad, Jayakrishnan; Ramesan, M. T.; Chandrasekharan, K.; Siji Narendran, N. K.

    2016-04-01

    We report our results on the identification of large order enhancement in nonlinear optical coefficients of polymerized indole and its comparative study with reference to its monomer counterpart. Indole monomer shows virtually little third order effects whereas its polymerized version exhibits phenomenal increase in its third order nonlinear optical parameters such as nonlinear refractive index and nonlinear absorption. Open aperture Z-scan trace of polyindole done with Q-switched Nd:YAG laser source (532 nm, 7 ns), shows β value as high as 89 cm/GW at a beam energy of 0.83 GW/cm2. Closed aperture Z-scan done at identical energies reveals nonlinear refractive index of the order of -3.55 × 10-17 m2/W. Band gap measurement of polyindole was done with UV-Vis absorption spectra and compared with that of Indole. FTIR spectra of the monomer and polymerized versions were recorded and relevant bond formations were confirmed from the characteristic peaks. Photo luminescent spectra were investigated to know the emission features of both molecules. Beam energy (I0) versus nonlinear absorption coefficient (β) plot indicates reverse saturable type of absorption behaviour in polyindole molecules. Degenerate Four Wave Mixing (DFWM) plot of polyindole reveals quite a cubic dependence between probe and phase conjugate signal and the resulting χ(3) is comparable with Z-scan results. Optical limiting efficiency of polyindole is comparable with certain derivatives of porphyrins, phthalocyanines and graphene oxides.

  13. Visualizing the Contributions of Virtual States to Two-Photon Absorption Cross Sections by Natural Transition Orbitals of Response Transition Density Matrices.

    Science.gov (United States)

    Nanda, Kaushik D; Krylov, Anna I

    2017-07-20

    Observables such as two-photon absorption cross sections cannot be computed from the wave functions of initial and final states alone because of their nonlinear nature. Rather, they depend on the entire manifold of the excited states, which follows from the familiar sum-over-states expressions of second- and higher-order properties. Consequently, the interpretation of the computed nonlinear optical properties in terms of molecular orbitals is not straightforward and usually relies on approximate few-states models. Here, we show that the two-photon absorption (2PA) transitions can be visualized using response one-particle transition density matrices, which are defined as transition density matrices between the zero-order and first-order perturbed states. We also extend the concept of natural transition orbitals to 2PA transitions. We illustrate the utility of this new tool, which provides a rigorous black box alternative to traditional qualitative few-states analysis, by considering 2PA transitions in ethylene, trans-stilbene, and para-nitroaniline.

  14. Noninvasive monitoring of glucose concentration using differential absorption low-coherence interferometry based on rapid scanning optical delay line

    Energy Technology Data Exchange (ETDEWEB)

    Zhou Yong; Zeng Nan; He Yonghong, E-mail: heyh@sz.tsinghua.edu.cn [Laboratory of Optical Imaging and Sensing, Graduate School at Shenzhen, Tsinghua University, Shenzhen, 518055 (China)

    2011-01-01

    A non-invasive method of detecting glucose concentration using differential absorption low-coherence interferometry (DALCI) based on rapid scanning optical delay line is presented. Two light sources, one centered within (1625 nm) a glucose absorption band, while the other outside (1310 nm) the glucose absorption band, are used in the experiment. The low-coherence interferometry (LCI) is employed to obtain the signals back-reflecting from the iris which carries the messages of material concentration in anterior chamber. Using rapid scanning optical delay line (RSOD) as the reference arm, we can detect the signals in a very short time. Therefore the glucose concentration can be monitored in real-time, which is very important for the detection in vivo. In our experiments, the cornea and aqueous humor can be treated as nearly non-scattering substance. The difference in the absorption coefficient is much larger than the difference in the scattering coefficient, so the influence of scattering can be neglected. By subtracting the algorithmic low-coherence interference signals of the two wavelengths, the absorption coefficient can be calculated which is proportional to glucose concentration. To reduce the speckle noise, a 30 variation of signals were used before the final calculation of the glucose concentration. The improvements of our experiment are also discussed in the article. The method has a potential application for noninvasive detection of glucose concentration in vivo and in real-time.

  15. Evaluating the Impact of Smoke Particle Absorption on Passive Satellite Cloud Optical Depth Retrievals

    Science.gov (United States)

    Alfaro-Contreras, R.; Zhang, J.; Reid, J. S.; Campbell, J. R.

    2013-12-01

    Absorbing aerosol particles, when lifted above clouds, can perturb top-of-atmosphere radiation radiances measured by passive satellite sensors through the absorption of reflected solar energy. This scenario, if not properly screened, impacts cloud physical retrievals, like cloud optical depth (COD), conducted using radiances/channels in the visible spectrum. We describe observations of smoke particle presence above cloud off the southwest coast of Africa, using spatially and temporally collocated Aqua Moderate Resolution Imaging Spectroradiometer (AQUA MODIS), Ozone Monitoring Instrument (OMI) and Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) measurements. Results from this study indicate that above cloud aerosol episodes happen rather frequent in the smoke outflow region during the Northern Hemisphere summer where above cloud aerosol plumes introduce a significant bias to MODIS COD retrievals in the visible spectrum. This suggests that individual COD retrievals as well as COD climatology from MODIS can be affected over the smoke outflow region by above cloud aerosol contamination and thus showing the need to account for the presence of above cloud absorbing aerosols in the MODIS visible COD retrievals.

  16. Oxygen Absorption in Free-Standing Porous Silicon: A Structural, Optical and Kinetic Analysis

    Directory of Open Access Journals (Sweden)

    Cisneros Rodolfo

    2010-01-01

    Full Text Available Abstract Porous silicon (PSi is a nanostructured material possessing a huge surface area per unit volume. In consequence, the adsorption and diffusion of oxygen in PSi are particularly important phenomena and frequently cause significant changes in its properties. In this paper, we study the thermal oxidation of p+-type free-standing PSi fabricated by anodic electrochemical etching. These free-standing samples were characterized by nitrogen adsorption, thermogravimetry, atomic force microscopy and powder X-ray diffraction. The results show a structural phase transition from crystalline silicon to a combination of cristobalite and quartz, passing through amorphous silicon and amorphous silicon-oxide structures, when the thermal oxidation temperature increases from 400 to 900 °C. Moreover, we observe some evidence of a sinterization at 400 °C and an optimal oxygen-absorption temperature about 700 °C. Finally, the UV/Visible spectrophotometry reveals a red and a blue shift of the optical transmittance spectra for samples with oxidation temperatures lower and higher than 700 °C, respectively.

  17. Optical absorption and fluorescent behaviour of titanium ions in silicate glasses

    Indian Academy of Sciences (India)

    Manoj Kumar; Aman Uniyal; A P S Chauhan; S P Singh

    2003-04-01

    Titanium in normal melting conditions in air atmosphere present as Ti4+ ion in basic silicate glasses exhibited an ultra-violet cut-off in silicate glasses, viz. soda–magnesia–silica, soda–magnesia–lime–silica and soda–lime–silica glasses. This indicates that Ti4+ ion can be a good replacement for Ce4+ ion in producing UV-absorbing silicate glasses for commercial applications. The wavelength maxima at which the infinite absorption takes place in glasses was found to be around 310 nm against Ti-free blank glass in UV-region. The mechanism of electronic transition from O2- ligands to Ti4+ ion was suggested as L $\\rightarrow$ M charge transfer. The low energy tails of the ultra-violet cut-off were found to obey Urbach’s rule in the optical range 360–500 nm. The fluorescence spectra of these glasses were also studied and based on the radiative fluorescent properties it was suggested that the soda–lime–silica glass containing Ti4+ ion with greater emission crosssection would emit a better fluorescence than the corresponding soda–magnesia–lime–silica and soda–magnesia–silica glasses. The shift of emission wavelengths maxima towards longer wavelength in titania introduced silicate glasses was observed on replacement of MgO by CaO which may be attributed due to an increase in basicity of the glass system.

  18. Exploring the Origin and Fate of the Magellanic Stream with Ultraviolet and Optical Absorption

    CERN Document Server

    Fox, Andrew J; Smoker, Jonathan V; Richter, Philipp; Savage, Blair D; Sembach, Kenneth R

    2010-01-01

    (Abridged) We present an analysis of ionization and metal enrichment in the Magellanic Stream (MS), the nearest gaseous tidal stream, using HST/STIS and FUSE ultraviolet spectroscopy of two background AGN, NGC 7469 and Mrk 335. For NGC 7469, we include optical spectroscopy from VLT/UVES. In both sightlines the MS is detected in low-ion and high-ion absorption. Toward NGC 7469, we measure a MS oxygen abundance [O/H]_MS=[OI/HI]=-1.00+/-0.05(stat)+/-0.08(syst), supporting the view that the Stream originates in the SMC rather than the LMC. We use CLOUDY to model the low-ion phase of the Stream as a photoionized plasma using the observed Si III/Si II and C III/C II ratios. Toward Mrk 335 this yields an ionization parameter log U between -3.45 and -3.15 and a gas density log (n_H/cm^-3) between -2.51 and -2.21. Toward NGC 7469 we derive sub-solar abundance ratios for [Si/O], [Fe/O], and [Al/O], indicating the presence of dust in the MS. The high-ion column densities are too large to be explained by photoionization,...

  19. Optical absorption and fluorescence properties of Er3+/Yb3+ codoped lead bismuth alumina borate glasses

    Science.gov (United States)

    Goud, K. Krishna Murthy; Reddy, M. Chandra Shekhar; Rao, B. Appa

    2014-04-01

    Lead bismuth alumina borate glasses codoped with Er3+/Yb3+ were prepared by melt quenching technique. Optical absorption, FTIR and photoluminescence spectra of these glasses have been studied. Judd-Ofelt theory has been applied to to the f ↔ f transitions for evaluating Ω2, Ω4 and Ω6 parameters. Radiative properties like branching ratio βr and the radiative life time τR have been determined on the basis of Judd-Ofelt theory. Upconversion emissions have been observed under 980nm laser excitation at room temperature. Green and red up-conversion emissions are centered at 530, 550 and 656 nm corresponding to 2H11/2→4I15/2, 4S3/2→4I15/2 and 4F9/2→4I15/2 transitions of Er3+ respectively. The results obtained are discussed quantitatively based on the energy transfer between Yb3+ and Er3+.

  20. EPR and optical absorption studies of Cu 2+ doped bis (glycinato) Mg (II) monohydrate single crystals

    Science.gov (United States)

    Dwivedi, Prashant; kripal, Ram

    2010-02-01

    Electron paramagnetic resonance (EPR) study of Cu 2+ doped bis (glycinato) Mg (II) monohydrate single crystals is carried out at room temperature. Copper enters the lattice substitutionally and is trapped at two magnetically inequivalent sites. The observed spectra are fitted to a spin-Hamiltonian of rhombic symmetry with the following values of the parameters: Cu 2+ (I), gx = 2.1577 ± 0.0002, gy = 2.2018 ± 0.0002, gz = 2.3259 ± 0.0002, Ax = (87 ± 2) × 10 -4 cm -1, Ay = (107 ± 2) × 10 -4 cm -1, Az = (141 ± 2) × 10 -4 cm -1; Cu 2+ (II), gx = 2.1108 ± 0.0002, gy = 2.1622 ± 0.0002, gz = 2.2971 ± 0.0002, Ax = (69 ± 2) × 10 -4 cm -1, Ay = (117 ± 2) × 10 -4 cm -1and Az = (134 ± 2) × 10 -4 cm -1. The ground state wave function of the Cu 2+ ion in this lattice is evaluated to be predominantly | x2 - y2lbond2 . The g-factor anisotropy is also calculated and compared with the experimental value. With the help of the optical absorption study, the nature of bonding in the complex is discussed.

  1. Energy distribution of precipitating electrons estimated from optical and cosmic noise absorption measurements

    Directory of Open Access Journals (Sweden)

    H. Mori

    2004-04-01

    Full Text Available This study is a statistical analysis on energy distribution of precipitating electrons, based on CNA (cosmic noise absorption data obtained from the 256-element imaging riometer in Poker Flat, Alaska (65.11° N, 147.42° W, and optical data measured with an MSP (Meridian Scanning Photometer over 79 days during the winter periods from 1996 to 1998. On the assumption that energy distributions of precipitating electrons represent Maxwellian distributions, CNA is estimated based on the observation data of auroral 427.8-nm and 630.0-nm emissions, as well as the average atmospheric model, and compared with the actual observation data. Although the observation data have a broad distribution, they show systematically larger CNA than the model estimate. CNA determination using kappa or double Maxwellian distributions, instead of Maxwellian distributions, better explains the distribution of observed CNA data. Kappa distributions represent a typical energy distribution of electrons in the plasma sheet of the magnetosphere, the source region of precipitating electrons. Pure kappas are more likely during quiet times – and quiet times are more likely than active times. This result suggests that the energy distribution of precipitating electrons reflects the energy distribution of electrons in the plasma sheet.

    Key words. Ionosphere (auroral ionosphere; particle precipitation; polar ionosphere

  2. Evaluation of hybrid polymers for high-precision manufacturing of 3D optical interconnects by two-photon absorption lithography

    Science.gov (United States)

    Schleunitz, A.; Klein, J. J.; Krupp, A.; Stender, B.; Houbertz, R.; Gruetzner, G.

    2017-02-01

    The fabrication of optical interconnects has been widely investigated for the generation of optical circuit boards. Twophoton absorption (TPA) lithography (or high-precision 3D printing) as an innovative production method for direct manufacture of individual 3D photonic structures gains more and more attention when optical polymers are employed. In this regard, we have evaluated novel ORMOCER-based hybrid polymers tailored for the manufacture of optical waveguides by means of high-precision 3D printing. In order to facilitate future industrial implementation, the processability was evaluated and the optical performance of embedded waveguides was assessed. The results illustrate that hybrid polymers are not only viable consumables for industrial manufacture of polymeric micro-optics using generic processes such as UV molding. They also are potential candidates to fabricate optical waveguide systems down to the chip level where TPA-based emerging manufacturing techniques are engaged. Hence, it is shown that hybrid polymers continue to meet the increasing expectations of dynamically growing markets of micro-optics and optical interconnects due to the flexibility of the employed polymer material concept.

  3. Detection of gastrointestinal cancer by elastic scattering and absorption spectroscopies with the Los Alamos Optical Biopsy System

    Energy Technology Data Exchange (ETDEWEB)

    Mourant, J.R.; Boyer, J.; Johnson, T.M.; Lacey, J.; Bigio, I.J. [Los Alamos National Lab., NM (United States); Bohorfoush, A. [Wisconsin Medical School, Milwaukee, WI (United States). Dept. of Gastroenterology; Mellow, M. [Univ. of Oklahoma Medical School, Oklahoma City, OK (United States). Dept. of Gastroenterology

    1995-03-01

    The Los Alamos National Laboratory has continued the development of the Optical Biopsy System (OBS) for noninvasive, real-time in situ diagnosis of tissue pathologies. In proceedings of earlier SPIE conferences we reported on clinical measurements in the bladder, and we report here on recent results of clinical tests in the gastrointestinal tract. With the OBS, tissue pathologies are detected/diagnosed using spectral measurements of the elastic optical transport properties (scattering and absorption) of the tissue over a wide range of wavelengths. The use of elastic scattering as the key to optical tissue diagnostics in the OBS is based on the fact that many tissue pathologies, including a majority of cancer forms, exhibit significant architectural changes at the cellular and sub-cellular level. Since the cellular components that cause elastic scattering have dimensions typically on the order of visible to near-IR wavelengths, the elastic (Mie) scattering properties will be wavelength dependent. Thus, morphology and size changes can be expected to cause significant changes m an optical signature that is derived from the wavelength-dependence of elastic scattering. Additionally, the optical geometry of the OBS beneficially enhances its sensitivity for measuring absorption bands. The OBS employs a small fiber-optic probe that is amenable to use with any endoscope or catheter, or to direct surface examination, as well as interstitial needle insertion. Data acquistion/display time is <1 second.

  4. Optical Absorption Property and Photo-catalytic Activity of Tin Dioxide-doped Titanium Dioxides

    Institute of Scientific and Technical Information of China (English)

    LI,Huai-Xiang; XIA,Rong-Hua; JIANG,Zheng-Wei; CHEN,Shan-Shan; CHEN,De-Zhan

    2008-01-01

    SnO2-doped TiO2 films and composite oxide powders have been prepared by a sol-gel method. Ti(OC4H9)4 and SnCl4·5H2O were used as precursors and C2H5OH was used as solvent. The optical absorption measurements indicate that the composite oxide SnO2-TiO2 thin films exhibit smaller optical energy band gaps than pure TiO2 thin films and the optical energy band gap decreases as calcining temperature increases. X-ray diffraction was used to characterize the phase transition for the composite oxide powders at different calcining temperatures. Aanatase phase is the main crystal structure in both pure TiO2 and Sn0.05Ti0.95O2 samples if calcining temperature is below 500℃. The rutile phase has appeared and coexisted with the anatase crystal phase for both pure TiO2 and Sn0.05Ti0.95O2 composite oxides when calcining was at 600℃ . Transmission electron microscopy analysis shows a smaller grain size in Sn0.05Ti0.95O2 powders than TiO2 powders calcined at 600℃. When calcining temperature is 700℃ , there is only rutile phase in Sn0.05Ti0.95O2 samples, but there are still two crystal phases, anatase and rutile, coexisting in the pure TiO2 samples. Assuming the grain growth obeys the first order kinetics, Arrhenius empirical relation has been used to estimate the activation energy of 47.486 and 33.103 kJ·mol-1 for the grain growth of TiO2 and Sn0.05Ti0.95O2, respectively. The photo-catalytic activity of the powder samples has been examined by measuring the degradation of methylene blue solution under ultra-violet irradiation. Two effective factors of photo-catalytic activity namely, the content of SnO2 in the TiO2 samples and the calcining temperature, have been optimized based on the photo-catalytic degradation of methylene blue solution.

  5. Absorption enhancement by matching the cross-section of plasmonic nanowires to the field structure of tightly focused beams.

    Science.gov (United States)

    Normatov, Alexander; Spektor, Boris; Leviatan, Yehuda; Shamir, Joseph

    2011-04-25

    Nanostructured materials, designed for enhanced light absorption, are receiving increased scientific and technological interest. In this paper we propose a physical criterion for designing the cross-sectional shape of plasmonic nanowires for improved absorption of a given tightly focused illumination. The idea is to design a shape which increases the matching between the nanowire plasmon resonance field and the incident field. As examples, we design nanowire shapes for two illumination cases: a tightly focused plane wave and a tightly focused beam containing a line singularity. We show that properly shaped and positioned silver nanowires that occupy a relatively small portion of the beam-waist area can absorb up to 65% of the total power of the incident beam.

  6. Absolute absorption cross sections of ozone at 300 K, 228 K and 195 K in the wavelength region 185-240 nm

    Science.gov (United States)

    Yoshino, K.; Parkinson, W. H.; Freeman, D. E.

    1992-01-01

    An account is given of progress of work on absorption cross section measurements of ozone at 300 K, 228 K and 195 K in the wavelength region 185-240 nm. In this wavelength region, the penetration of solar radiation into the Earth's atmosphere is controlled by O2 and O3. The transmitted radiation is available to dissociate trace species such as halocarbons and nitrous oxide. We have recently measured absolute absorption cross sections of O3 in the wavelength region 240-350 nm (Freeman et al., 1985; Yoshino et al., 1988). We apply these proven techniques to the determination of the absorption cross section of O3 at 300 K, 228 K and 195 K throughout the wavelength region 185-240 nm. A paper titled 'Absolute Absorption Cross Section Measurements of Ozone in the Wavelength Region 185-254 nm and the Temperature Dependence' has been submitted for publication in the Journal of Geophysical Research.

  7. Filter-based measurements of UV-vis mass absorption cross sections of organic carbon aerosol from residential biomass combustion: Preliminary findings and sources of uncertainty

    Science.gov (United States)

    Pandey, Apoorva; Pervez, Shamsh; Chakrabarty, Rajan K.

    2016-10-01

    Combustion of solid biomass fuels is a major source of household energy in developing nations. Black (BC) and organic carbon (OC) aerosols are the major PM2.5 (particulate matter with aerodynamic diameter smaller than 2.5 μm) pollutants co-emitted during burning of these fuels. While the optical nature of BC is well characterized, very little is known about the properties of light-absorbing OC (LAOC). Here, we report our preliminary findings on the mass-based optical properties of LAOC emitted from the combustion of four commonly used solid biomass fuels - fuel-wood, agricultural residue, dung-cake, and mixed - in traditional Indian cookstoves. As part of a pilot field study conducted in central India, PM2.5 samples were collected on Teflon filters and analyzed for their absorbance spectra in the 300-900 nm wavelengths at 1 nm resolution using a UV-Visible spectrophotometer equipped with an integrating sphere. The mean mass absorption cross-sections (MAC) of the emitted PM2.5 and OC, at 550 nm, were 0.8 and 0.2 m2 g-1, respectively, each with a factor of ~2.3 uncertainty. The mean absorption Ångström exponent (AǺE) values for PM2.5 were 3±1 between 350 and 550 nm, and 1.2±0.1 between 550 and 880 nm. In the 350-550 nm range, OC had an AǺE of 6.3±1.8. The emitted OC mass, which was on average 25 times of the BC mass, contributed over 50% of the aerosol absorbance at wavelengths smaller than 450 nm. The overall OC contribution to visible solar light (300-900 nm) absorption by the emitted particles was 26-45%. Our results highlight the need to comprehensively and accurately address: (i) the climatic impacts of light absorption by OC from cookstove emissions, and (ii) the uncertainties and biases associated with variability in biomass fuel types and combustion conditions, and filter-based measurement artifacts during determination of MAC values.

  8. Optical imaging of absorption and distribution of RITC-SiO2 nanoparticles after oral administration

    Directory of Open Access Journals (Sweden)

    Lee CM

    2014-12-01

    Full Text Available Chang-Moon Lee,1 Tai Kyoung Lee,2–5 Dae-Ik Kim,1,6 Yu-Ri Kim,7 Meyoung-Kon Kim,7 Hwan-Jeong Jeong,2–5 Myung-Hee Sohn,2–5 Seok Tae Lim2–5 1Department of Biomedical Engineering, Chonnam National University, Yeosu, Jeollanam-Do, Republic of Korea; 2Department of Nuclear Medicine, Chonbuk National University Medical School and Hospital, Jeonju, Jeollabuk-Do, Republic of Korea; 3Cyclotron Research Center, Chonbuk National University Medical School and Hospital, Jeonju, Jeollabuk-Do, Republic of Korea; 4Biomedical Research Institute, Chonbuk National University Medical School and Hospital, Jeonju, Jeollabuk-Do, Republic of Korea; 5Molecular Imaging and Therapeutic Medicine Research Center, Chonbuk National University Medical School and Hospital, Jeonju, Jeollabuk-Do, Republic of Korea; 6School of Electrical, Electronic Communication, and Computer Engineering, Chonnam National University, Yeosu, Jeollanam-Do, Republic of Korea; 7Department of Biochemistry and Molecular Biology, Korea University Medical School and College, Seounbuk-Gu, Seoul, Republic of Korea Purpose: In this study, we investigated the absorption and distribution of rhodamine B isothiocyanate (RITC-incorporated silica oxide nanoparticles(SiNPs (RITC-SiNPs after oral exposure, by conducting optical imaging, with a focus on tracking the movement of RITC-SiNPs of different particle size and surface charge. Methods: RITC-SiNPs (20 or 100 nm; positively or negatively charged were used to avoid the dissociation of a fluorescent dye from nanoparticles via spontaneous or enzyme-catalyzed reactions in vivo. The changes in the nanoparticle sizes and shapes were investigated in an HCl solution for 6 hours. RITC-SiNPs were orally administered to healthy nude mice at a dose of 100 mg/kg. Optical imaging studies were performed at 2, 4, and 6 hours after oral administration. The mice were sacrificed at 2, 4, 6, and 10 hours post-administration, and ex vivo imaging studies were performed

  9. Device Length Dependency of Cross Gain Modulation and Cross Phase Modulation in Semiconductor Optical Amplifier

    Institute of Scientific and Technical Information of China (English)

    Tomonori; Yazaki; Ryo; Inohara; Kosuke; Nishimura; Munefumi; Tsurusawa; Masashi; Usami

    2003-01-01

    The cross gain modulation, the cross phase modulation and their recovery time in the SOAs with the various lengths were experimentally investigated. It was found that these values strongly depended on the device length.

  10. Automatic SAR/optical cross-matching for GCP monograph generation

    Science.gov (United States)

    Nutricato, Raffaele; Morea, Alberto; Nitti, Davide Oscar; La Mantia, Claudio; Agrimano, Luigi; Samarelli, Sergio; Chiaradia, Maria Teresa

    2016-10-01

    Ground Control Points (GCP), automatically extracted from Synthetic Aperture Radar (SAR) images through 3D stereo analysis, can be effectively exploited for an automatic orthorectification of optical imagery if they can be robustly located in the basic optical images. The present study outlines a SAR/Optical cross-matching procedure that allows a robust alignment of radar and optical images, and consequently to derive automatically the corresponding sub-pixel position of the GCPs in the optical image in input, expressed as fractional pixel/line image coordinates. The cross-matching in performed in two subsequent steps, in order to gradually gather a better precision. The first step is based on the Mutual Information (MI) maximization between optical and SAR chips while the last one uses the Normalized Cross-Correlation as similarity metric. This work outlines the designed algorithmic solution and discusses the results derived over the urban area of Pisa (Italy), where more than ten COSMO-SkyMed Enhanced Spotlight stereo images with different beams and passes are available. The experimental analysis involves different satellite images, in order to evaluate the performances of the algorithm w.r.t. the optical spatial resolution. An assessment of the performances of the algorithm has been carried out, and errors are computed by measuring the distance between the GCP pixel/line position in the optical image, automatically estimated by the tool, and the "true" position of the GCP, visually identified by an expert user in the optical images.

  11. Off-Resonant Two-Photon Absorption Cross-Section Enhancement of an Organic Chromophore on Gold Nanorods

    Science.gov (United States)

    Sivapalan, Sean T.; Vella, Jarrett H.; Yang, Timothy K.; Dalton, Matthew J.; Haley, Joy E.; Cooper, Thomas M.; Urbas, Augustine M.; Tan, Loon-Seng; Murphy, Catherine J.

    2013-01-01

    Surface-plasmon-initiated interference effects of polyelectrolyte-coated gold nanorods on the two-photon absorption of an organic chromophore were investigated. With polyelectrolyte bearing gold nanorods of 2,4,6 and 8 layers, the role of the plasmonic fields as function of distance on such effects was examined. An unusual distance dependence was found: enhancements in the two-photon cross-section were at a minimum at an intermediate distance, then rose again at a further distance. The observed values of enhancement were compared to theoretical predictions using finite element analysis and showed good agreementdue to constructive and destructive interference effects. PMID:23687561

  12. Evaluation of the use of five laboratory determined ozone absorption cross sections in brewer and dobson retrieval algorithms

    Directory of Open Access Journals (Sweden)

    A. Redondas

    2013-09-01

    Full Text Available The primary ground-based instruments used to report total column ozone (TOC are Brewer and Dobson Spectrophotometers, in separate networks. These instruments make measurements of the UV irradiances, and through a well-defined process a TOC value is produced. Inherent in the algorithm is the use of a laboratory determined cross-section data set. We used five ozone cross section data sets: three Bass and Paur, Daumont, Malicet and Brion (DMB and a new Institute of Environmental Physics (IUP, University of Bremen, set. The three Bass and Paur (1985 sets are: quadratic temperature coefficients from IGACO web page (IGQ4, the Brewer network operational calibration set (BOp, and the set used by Bernhard et al. (2005, in the reanalysis of the Dobson absorption coefficient values (B05. The ozone absorption coefficients for Brewer and Dobson are then calculated using the normal Brewer operative method which is essentially the same as used on Dobson. Considering the standard TOC algorithm for the Brewer instruments and comparing to the Brewer standard operational calibration data set, using the slit functions for the individual instruments: we find the UIP data set changes the calculated TOC by −0.5%, the DBM data set changes the calculate TOC by −3.2%, and the IGQ4 data set at −45 °C changes the calculated TOC by +1.3%. Considering the standard algorithm for the Dobson instruments, and comparing to results using the official 1992 ozone absorption coefficients values and the single set of slit functions defined for all Dobson instruments, the calculated TOC changes by +1%, with little variation depending on which data set is used We applied the changes to the European Dobson and Brewer reference instruments during the Izaña 2012 Absolute Calibration Campaign. The application of a common Langley calibration and the IUP cross section the differences between Brewer and Dobson vanish whereas using Bass and Paur and DBM produce differences of 1.5% and 2

  13. Effects of ternary mixed crystal and size on intersubband optical absorption in wurtzite InGaN/GaN core-shell nanowires

    Science.gov (United States)

    Liu, W. H.; Yang, S.; Feng, H. M.; Yang, L.; Qu, Y.; Ban, S. L.

    2015-07-01

    Based on the density matrix approach, the effects of ternary mixed crystal and size on intersubband optical absorption coefficients in InxGa1-xN/GaN core-shell nanowires (CSNWs) are investigated. The results show that the optical absorption can be modulated by In component x and the size of CSNWs, since the variation of electron states in these systems. It is found that photonic frequencies of resonant absorption and the absorption coefficient increase obviously when x increases or the radius of InGaN core reduces, while the half-width of the coefficient decreases as its peak becomes higher and sharper. A saturation phenomenon of optical absorption is also found when the incident light intensity exceeds a certain value. The theoretical results are expected to be helpful to develop CSNW optic devices.

  14. Gradient-based quantitative reconstruction of optical absorption and scattering coefficients in ultrasound-modulated optical tomography: first harmonic measurement type

    CERN Document Server

    Powell, Samuel; Leung, Terence S

    2014-01-01

    Ultrasound-modulated optical tomography is an emerging biomedical imaging modality which uses the spatially localised acoustically-driven modulation of coherent light as a probe of the structure and optical properties of biological tissues. In this work we pose the inverse problem of simultaneously recovering the optical absorption and scattering coefficients in a given domain from measurement of the power-spectral density of the optical field modulated to the acoustic frequency. As part of this exposition we provide an overview of forward modelling techniques, and derive an efficient linearised diffusion-style model. To ameliorate the computational burden and memory requirements of a traditional Newton-based optimisation approach, we develop an adjoint-assisted gradient based method. We validate our reconstruction in two- and three-dimensions using simulated measurements with 1% proportional Gaussian noise, and demonstrate the successful recovery of the parameters to within +/-5% of their true values when th...

  15. Structure-Related Optical Fingerprints in the Absorption Spectra of Colloidal Quantum Dots: Random Alloy vs. Core/Shell Systems

    CERN Document Server

    Mourad, Daniel

    2016-01-01

    We argue that the experimentally easily accessible optical absorption spectrum can often be used to distinguish between a random alloy phase and a stoichiometrically equivalent core/shell realization of ensembles of monodisperse colloidal semiconductor quantum dots without the need for more advanced structural characterization tools. Our proof-of-concept is performed by conceptually straightforward exact-disorder tight-binding calculations. The underlying stochastical tight-binding scheme only parametrizes bulk band structure properties and does not employ additional free parameters to calculate the optical absorption spectrum, which is an easily accessible experimental property. The method is applied to selected realizations of type-I Cd(Se,S) and type-II (Zn,Cd)(Se,S) alloyed quantum dots with an underlying zincblende crystal structure and the corresponding core/shell counterparts.

  16. Characterization of Mn{sup 2+} doped tetramethylammoniumtetrachlorozincate single crystal using EPR and optical absorption

    Energy Technology Data Exchange (ETDEWEB)

    Kripal, Ram [EPR Laboratory, Department of Physics, University of Allahabad, Allahabad 211002, Uttar Pradesh (India)], E-mail: ram_kripal2001@rediffmail.com; Maurya, Manju [EPR Laboratory, Department of Physics, University of Allahabad, Allahabad 211002, Uttar Pradesh (India)], E-mail: mmanju8@yahoo.co.in

    2008-04-15

    Studies of fine and hyperfine structures of paramagnetic resonance spectra in single crystals of Mn{sup 2+}: tetramethylammoniumtetrachlorozincate are reported. As sufficient numbers of lines were not obtained at room temperature, measurements were done at liquid nitrogen temperature (77 K). The Mn{sup 2+} spin Hamiltonian parameters are evaluated employing a large number of resonant line positions observed for various orientations of the external magnetic field. The values of the zero field parameters that give good fit to the observed EPR spectra are obtained. The values of different parameters are: g = 1.9834 {+-} 0.0002, A = (105 {+-} 2) x 10{sup -4} cm{sup -1}, B = (100 {+-} 2) x 10{sup -4} cm{sup -1}, D = (349 {+-} 2) x 10{sup -4} cm{sup -1}, E = (106 {+-} 2) x 10{sup -4} cm{sup -1} and a = (21 {+-} 1) x 10{sup -4} cm{sup -1}. The percentage of covalency of the metal-ligand bond has also been determined. From the optical absorption study, the lattice distortion is suggested. The observed bands are assigned as transitions from the {sup 6}A{sub 1g}(S) ground state to various excited quartet levels of Mn{sup 2+} ion in a cubic crystalline field. The electron repulsion parameters (B and C) and crystal field parameters (D{sub q} and {alpha}) providing a good fit to the observed optical spectra are evaluated and the values are: B = 737 cm{sup -1}, C = 2322 cm{sup -1}, D{sub q} = 670 cm{sup -1} and {alpha} = 76 cm{sup -1}. The considerable decrease in the values of B and C parameters from free ion values (B = 960 cm{sup -1}, C = 3325 cm{sup -1}) has indicated that there exists a fair amount of covalent bonding between the central metal ion and the ligand. On the basis of deviations {delta}g = g - 2.0023 it has been ascertained whether electrons are transferred to or from the central ion by the action of bonding.

  17. Protein dynamics in an intermediate state of myoglobin: optical absorption, resonance Raman spectroscopy, and x-ray structure analysis.

    OpenAIRE

    N. Engler; Ostermann, A; Gassmann, A.; Lamb, D C; Prusakov, V E; J. Schott; Schweitzer-Stenner, R; Parak, F. G.

    2000-01-01

    A metastable state of myoglobin is produced by reduction of metmyoglobin at low temperatures. This is done either by irradiation with x-rays at 80 K or by electron transfer from photoexcited tris(2, 2'-bipyridine)-ruthenium(II) at 20 K. At temperatures above 150 K, the conformational transition toward the equilibrium deoxymyoglobin is observed. X-ray crystallography, Raman spectroscopy, and temperature-dependent optical absorption spectroscopy show that the metastable state has a six-ligated ...

  18. Electrical conductivity, ionic conductivity, optical absorption, and gas separation properties of ionically conductive polymer membranes embedded with Si microwire arrays

    OpenAIRE

    Spurgeon, Joshua M.; Walter, Michael G.; Zhou, Junfeng; Kohl, Paul A.; Lewis, Nathan S.

    2011-01-01

    The optical absorption, ionic conductivity, electronic conductivity, and gas separation properties have been evaluated for flexible composite films of ionically conductive polymers that contain partially embedded arrays of ordered, crystalline, p-type Si microwires. The cation exchange ionomer Nafion, and a recently developed anion exchange ionomer, poly(arylene ether sulfone) that contains quaternary ammonium groups (QAPSF), produced composite microwire array/ionomer membrane films that were...

  19. DSC, ESR and optical absorption studies of Cu{sup 2+} ion doped in boro cadmium tellurite glasses

    Energy Technology Data Exchange (ETDEWEB)

    Gayathri Pavani, P., E-mail: gayathri.potturi@gmail.com [Glassy Material Research Laboratory, Department of Physics, Osmania University, Hyderabad 500 007 (India); Prasad, M.; Chandra Mouli, V. [Glassy Material Research Laboratory, Department of Physics, Osmania University, Hyderabad 500 007 (India)

    2012-06-25

    Highlights: Black-Right-Pointing-Pointer Variation in different physical parameters of the glass system is studied. Black-Right-Pointing-Pointer Variation in glass transition temperature is discussed in terms of different structural parameters. Black-Right-Pointing-Pointer ESR analysis and the bonding parameters determination of the present glass system is interesting. - Abstract: Physical, optical absorption, ESR and DSC studies on 50 B{sub 2}O{sub 3}-(50 - x) CdO-xTeO{sub 2} glasses containing Cu{sup 2+} spin probe have been carried out. Density measurement is carried out by Archimedes principle. Variation in glass transition temperature is discussed in terms of physical parameters. ESR results show that g{sub Parallel-To} > g{sub Up-Tack} indicating that the Cu{sup 2+} ions is in tetragonal distorted octahedral site and its ground state is d{sub x{sub 2-y{sub 2}}}. There are considerable changes in g{sub Parallel-To }, g{sub Up-Tack} and A{sub Parallel-To} values with increasing the concentration of CdO in BCT glass systems. The optical absorption spectra results show that the absorption peak of Cu{sup 2+} is a function of composition. The observed optical absorption peak of Cu{sup 2+} has been found to be minimum at 776 nm for x = 30 mol.% of CdO content. The variations in the physical, optical and bonding parameters clearly indicate the structural changes in the present glass system with varied CdO content.

  20. Annealing-induced optical and sub-band-gap absorption parameters of Sn-doped CdSe thin films

    Science.gov (United States)

    Kaur, Jagdish; Tripathi, S. K.

    2016-01-01

    Thin films of Sn-doped CdSe were prepared by thermal evaporation onto glass substrates in an argon gas atmosphere and annealed at different temperatures. Structural evaluation of the films was carried out using X-ray diffraction and their stoichiometry studied by energy-dispersive X-ray analysis. The films exhibit a preferred orientation along the hexagonal direction of CdSe. The optical transmittance of the films shows a red shift of the absorption edge with annealing. The fundamental absorption edge corresponds to a direct energy gap with a temperature coefficient of 3.34 × 10-3 eV K-1. The refractive index, optical conductivity and real and imaginary parts of the dielectric constants were found to increase after annealing. The sub-band gap absorption coefficient was evaluated using the constant photocurrent method. It varies exponentially with photon energy. The Urbach energy, the density of defect states, and the steepness of the density of localized states were evaluated from the sub-band-gap absorption.

  1. Transverse UV-laser irradiation-induced defects and absorption in a single-mode erbium-doped optical fiber

    Energy Technology Data Exchange (ETDEWEB)

    Tortech, B.; Ouerdane, Y.; Boukenter, A.; Meunier, J. P. [Univ St Etienne, Lab Hubert Curien, CNRS, UMR 5516, F-42000 St Etienne (France); Girard, S. [CEA Bruyeres le Chatel, DIF, 91 (France); Van Uffelen, M.; Berghmans, F. [CEN SCK, B-2400 Mol (Belgium); Regnier, E. [Draka Comteq France, Data Ctr 4, F-91460 Marcoussis (France); Berghmans, F.; Thienpont, H. [Vrije Univ Brussels, B-1050 Brussels, (Belgium)

    2009-07-15

    Near UV-visible absorption coefficients of an erbium-doped optical fiber were investigated through an original technique based on a transverse cw UV-laser irradiation operating at 244 nm. Such irradiation leads to the generation of a quite intense guided luminescence signal in near UV spectral range. This photoluminescence probe source combined with a longitudinal translation of the fiber sample (at a constant velocity) along the UV-laser irradiation, presents several major advantages: (i) we bypass and avoid the procedures classically used to study the radiation induced attenuation which are not adapted to our case mainly because the samples present a very strong absorption with significant difficulties due to the injection of adequate UV-light levels in a small fiber diameter: (ii) the influence of the laser irradiation on the host matrix of the optical fiber is directly correlated to the evolution of the generated photoluminescence signal and (iii) in our experimental conditions, short fiber sample lengths (typically 20-30 cm) suffice to determine the associated absorption coefficients over the entire studied spectral domain. The generated photoluminescence signal is also used to characterize the absorption of the erbium ions in the same wavelength range with no cut-back method needed. (authors)

  2. Mapping the Optical Absorption of a Substrate-Transferred Crystalline AlGaAs Coating at 1.5um

    CERN Document Server

    Steinlechner, Jessica; Bell, Angus; Cole, Garrett; Hough, Jim; Penn, Steven; Rowan, Sheila; Steinlechner, Sebastian

    2014-01-01

    The sensitivity of 2nd and 3rd generations of interferometric gravitational wave detectors will be limited by thermal noise of the test-mass mirrors and highly reflective coatings. Recently developed crystalline coatings show a promising thermal noise reduction compared to presently used amorphous coatings. However, stringent requirements apply to the optical properties of the coatings as well. We have mapped the optical absorption of a crystalline AlGaAs coating which is optimized for high reflectivity for a wavelength of 1064nm. The absorption was measured at 1550nm where the coating stack transmits approximately 70% of the laser light. The measured absorption was lower than (30.2 +/- 11.1)ppm which is equivalent to (3.6 +/- 1.3)ppm for a coating stack that is highly reflective at 1530nm. While this is a very promising low absorption result for alternative low--loss coating materials, further work will be necessary to reach the requirements of <1ppm for future gravitational wave detectors.

  3. Rotationally inelastic scattering in CH4+He, Ne, and Ar: State-to-state cross sections via direct infrared laser absorption in crossed supersonic jets

    Science.gov (United States)

    Chapman, William B.; Schiffman, Aram; Hutson, Jeremy M.; Nesbitt, David J.

    1996-09-01

    Absolute integral state-to-state cross sections are reported for rotationally inelastic scattering in crossed jets of CH4 with the rare gases He, Ne, Ar, at center of mass collision energies of 460±90, 350±70, and 300±60 cm-1, respectively. CH4 seeded in Ar buffer gas is cooled in a pulsed supersonic expansion into the three lowest rotational levels allowed by nuclear spin statistics corresponding to A(J=0), F(J=1), and E(J=2) symmetry. Rotational excitation occurs in single collisions with rare gas atoms from a second pulsed supersonic jet. The column integrated densities of CH4 in both initial and final scattering states are subsequently probed in the jet intersection region via direct absorption of light from a narrow bandwidth (0.0001 cm-1), single mode color center laser. Total inelastic cross sections for collisional loss out of the J=0, 1, and 2 methane states are determined in absolute units from the linear decrease of infrared absorption signals as a function of collider gas concentration. Tuning of the ir laser source also permits probing of the collisionally excited rotational states with quantum state and velocity resolution; column integrated scattering densities are measured for all energetically accessible final states and used to infer absolute inelastic cross sections for state-to-state energy transfer. The observed trends are in good qualitative agreement with quantum state resolved pressure broadening studies; however, the dependences of the rotationally inelastic cross sections on nuclear spin modification (i.e., J) and rotational inelasticity (i.e., ΔJ) is not well predicted by conventional angular momentum or energy gap models. More rigorous comparison with the quantum state-resolved scattering data is obtained from full close coupled scattering calculations on trial potential energy surfaces by Buck and co-workers [Chem. Phys. Lett. 98, 199 (1983); Mol. Phys. 55, 1233, 1255 (1985)] for each of the three CH4+rare gas systems. Agreement

  4. Understanding the shrinkage of optical absorption edges of nanostructured Cd-Zn sulphide films for photothermal applications

    Science.gov (United States)

    Hossain, Md. Sohrab; Kabir, Humayun; Rahman, M. Mahbubur; Hasan, Kamrul; Bashar, Muhammad Shahriar; Rahman, Mashudur; Gafur, Md. Abdul; Islam, Shariful; Amri, Amun; Jiang, Zhong-Tao; Altarawneh, Mohammednoor; Dlugogorski, Bogdan Z.

    2017-01-01

    In this article Cd-Zn sulphide thin films deposited onto soda lime glass substrates via chemical bath deposition (CBD) technique were investigated for photovoltaic applications. The synthesized films were investigated using X-ray diffraction (XRD), scanning electron microscopy (SEM), and ultraviolet visible (UV-vis) spectroscopic methodologies. A higher degree of crystallinity of the films was attained with the increase of film thicknesses. SEM micrographs exhibited a partial crystalline structure with a particulate appearance surrounded by the amorphous grain boundaries. The optical absorbance and absorption coefficient of the films were also enhanced significantly with the increase in film thicknesses. Optical band-gap analysis indicated a monotonic decrease in direct and indirect band-gaps with the increase of thicknesses of the films. The presence of direct and indirect transitional energies due to the exponential falling edges of the absorption curves may either be due to the lack of long-range order or to the existence of defects in the films. The declination of the optical absorption edges was also confirmed via Urbach energy and steepness parameters studies.

  5. Cross talk analysis in multicore optical fibers by supermode theory.

    Science.gov (United States)

    Szostkiewicz, Lukasz; Napierala, Marek; Ziolowicz, Anna; Pytel, Anna; Tenderenda, Tadeusz; Nasilowski, Tomasz

    2016-08-15

    We discuss the theoretical aspects of core-to-core power transfer in multicore fibers relying on supermode theory. Based on a dual core fiber model, we investigate the consequences of this approach, such as the influence of initial excitation conditions on cross talk. Supermode interpretation of power coupling proves to be intuitive and thus may lead to new concepts of multicore fiber-based devices. As a conclusion, we propose a definition of a uniform cross talk parameter that describes multicore fiber design.

  6. Optical absorption and small-polaron hopping in oxygen deficient and lithium-ion-intercalated amorphous titanium oxide films

    Science.gov (United States)

    Triana, C. A.; Granqvist, C. G.; Niklasson, G. A.

    2016-01-01

    Optical absorption in oxygen-deficient and Li+-ion inserted titanium oxide films was studied in the framework of small-polaron hopping. Non-stoichiometric TiOy films with 1.68 ≤ y ≤ 2.00 were deposited by reactive DC magnetron sputtering and were subjected to electrochemical intercalation of Li+-ions and charge-balancing electrons to obtain LixTiOy films with 0.12 ≤ x ≤ 0.34. Dispersion analysis was applied to calculate the complex dielectric function ɛ(ℏω) ≡ ɛ1(ℏω) + i ɛ2(ℏω) from numerical inversion of optical transmittance and reflectance spectra; a superposition of Tauc-Lorentz and Lorentz oscillator models was used for this purpose. Data on ɛ2(ℏω) were employed to calculate the optical conductivity and fit this property to a small-polaron model for disordered systems with strong electron-phonon interaction and involving transitions near the Fermi level. The introduction of oxygen vacancies and/or Li+ insertion yielded band gap widening by ˜0.20-0.35 eV, and both processes induced similar low-energy optical absorption. The small-polaron-based analysis indicated increases in the Fermi level by ˜0.15-0.3 eV for sub-stoichiometric and/or Li+-inserted films. This suggests the existence of polaronic Ti3+ states in the lower part of the conduction band arising from transfer of electrons from oxygen vacancies and/or inserted Li+ species. The present article is a sequel to an earlier paper on oxygen-deficient and/or Li+-inserted amorphous WOy thin films and forms part of a comprehensive investigation of optical absorption in amorphous transition metal oxides with different valence states of the metallic ions.

  7. Excitations, optical absorption spectra, and optical excitonic gaps of heterofullerenes: I. C60, C59N+ and C48N12

    Energy Technology Data Exchange (ETDEWEB)

    Xie, R; Bryant, G W; Sun, G; C.Nicklaus, M; Heringer, D; Frauenheim, T; Manaa, M R; Smith, Jr., V H; Araki, Y; Ito, O

    2003-10-02

    Low-energy excitations and optical absorption spectrum of C{sub 60} are computed by using time-dependent (TD) Hartree-Fock (HF), TD-density functional theory (TD-DFT), TD-DFT-based tight-binding (TD-DFT-TB) and a semiempirical ZINDO method. A detailed comparison of experiment and theory for the excitation energies, optical gap and absorption spectrum of C{sub 60} is presented. It is found that electron correlations and collective effects of exciton pairs play important roles in assigning accurately the spectral features of C{sub 60} and the TD-DFT method with non-hybrid functionals or a local spin density approximation leads to more accurate excitation energies than with hybrid functionals. The level of agreement between theory and experiment for C{sub 60} justifies similar calculations of the excitations and optical absorption spectrum of a monomeric azafullerene cation C{sub 59}N{sup +} exhibits distinguishing spectral features different from C{sub 60}: (1) the first singlet is dipole-allowed and the optical gap is redshifted by 1.44 eV; (2) several weaker absorption maxima occur in the visible region; (3) the transient triplet-triplet absorption at 1.60 eV (775 nm) is much broader and the decay of the triplet state is much faster. The calculated spectra of C{sub 59}N{sup +} characterize and explain well our measured ultraviolet-visible (UV-vis) and transient absorption spectra of the carborane anion salt [C{sub 59}N][Ag(CB{sub 11}H{sub 6}Cl{sub 6}){sub 2}]. For the most stable isomer of C{sub 48}N{sub 12}, we predict that the first singlet is dipole-allowed, the optical gap is redshifted by 1.22 eV relative to that of C{sub 60}, and optical absorption maxima occur at 585, 528, 443, 363, 340, 314 and 303 nm. We point out that the characterization of the UV-vis and transient absorption spectra of C{sub 48}N{sub 12} isomers is helpful in distinguishing the isomer structures required for applications in molecular electronics. For C{sub 59}N{sup +} and C{sub 48}N

  8. Index-profile design for low-loss crossed multimode waveguide for optical printed circuit board.

    Science.gov (United States)

    Ishigure, Takaaki; Shitanda, Keishiro; Oizmi, Yutaro

    2015-08-24

    We present an index profile design for remarkably low loss multimode optical crossed waveguide. In this paper, we theoretically calculate the light propagation loss in crossed waveguides with step-index (SI) and graded-index (GI) square cores utilizing a ray tracing simulation. In this simulation, we focus on the index exponent values for the GI profile, which allows low crossing loss even if the number of crossing is as large as 50 or even if the crossing angle is as low as 20°. It is revealed that an index exponent of 2.0 for the GI core strongly contributes to exhibit 35 times lower loss (0.072 dB after 50-perpendicular crosses) compared to the loss of the SI-core counterpart (2.58 dB after the same crossings). The GI cores with a smaller index exponent exhibit better loss in crossed waveguides with a wide range of crossing angles from 30° to 90°. Furthermore, we discuss the effect of the refractive index profile at the intersection on the optical loss of crossed waveguides.

  9. A Comprehensive Catalogue of Absorption Cross-Sections of Halocarbons and Related Molecules

    Science.gov (United States)

    Shine, Keith P.; Hodnebrog, O.; Fuglestvedt, J. S.; Myhre, G.; Marston, G.; Nielsen, C. J.; Wallington, T. J.

    2014-06-01

    The collation and applications of a comprehensive database of infrared cross-sections of 200 halocarbons and related molecules is described. The first phase of this research was published by Hodnebrog et al. (Reviews of Geophysics, 2013, doi:10.1002/rog.20013) in which cross-sections were drawn from a wide range of laboratory studies in the published literature and, when these were not available, from ab initio calculations. The criteria for selection of particular cross-section data sets will be described. The primary purpose of the database is for use in the calculation of radiative forcing and climate metrics such as the Global Warming Potential, and illustrations of their usage will be given. The work on the database is intended to be an ongoing exercise and the plan is to revise and expand the database as new data become available.

  10. Cross-polarization in quasi-optical receivers: ALMA band 4 and 10

    Science.gov (United States)

    Gonzalez, A.; Uzawa, Y.

    2012-09-01

    A careful study about the influence of individual optical components on receiver cross-polarization has been performed. The basic mechanisms of generation of cross-polarization in ellipsoidal mirrors and dielectrics have been reviewed and characterized in terms of higher-order Gaussian beam modes. A simple model considering the phase differences of different Gaussian beam modes is proposed in order to calculate the final system cross-polarization pattern. This model has been successfully used to characterize the total cross-polarization in two cryogenically-cooled receivers for astronomy: ALMA band 4 and band 10.

  11. THEORY OF PHONON-ASSISTED MULTIMAGNON OPTICAL-ABSORPTION AND BIMAGNON STATES IN QUANTUM ANTIFERROMAGNETS

    NARCIS (Netherlands)

    Lorenzana, J.; Sawatzky, G.A

    1995-01-01

    We calculate the effective charge for multimagnon infrared absorption assisted by phonons in a perovskitelike antiferromagnet and we compute the spectra for two-magnon absorption using interacting spin-wave theory. The full set of equations for the interacting two-magnon problem is presented in the

  12. An organic dye-polymer (phenol red-poly (vinyl alcohol)) composite architecture towards tunable -optical and -saturable absorption characteristics

    Science.gov (United States)

    Sreedhar, Sreeja; Illyaskutty, Navas; Sreedhanya, S.; Philip, Reji; Muneera, C. I.

    2016-05-01

    Herein, we demonstrate that blending an organic dye (guest/filler), with a vinyl polymer (host template), is an inexpensive and simple approach for the fabrication of multifunctional photonic materials which could display an enhancement in the desirable properties of the constituent materials and, at the same time provide novel synergistic properties for the guest-host system. A new guest-host nanocomposite system comprising Phenol Red dye and poly (vinyl alcohol) as guest and host template, respectively, which exhibits tunable optical characteristics and saturable absorption behavior, is introduced. The dependence of local electronic environment provided by the polymer template and the interactions of the polymer molecules with the encapsulated guest molecules on the observed optical/nonlinear absorption behavior is discussed. An understanding of the tunability of the optical/ photophysical processes, with respect to the filler content, as discussed herein could help in the design of improved optical materials for several photonic device applications like organic light emitting diodes and saturable absorbers.

  13. Rocket Radiation Handbook, Volume 2. Model Equations for Photon Emission Rates and Absorption Cross-Sections

    Science.gov (United States)

    1973-12-01

    cm2) (Refs. 7 and 9) (9Cross-Section, a(10- 16 cm 2) First Second At ~ Atom or Fuchtbauer., Molecule Joos and Zemansky Kunze Din kelac ke r Hg He 15.0...G. and M. W. Zemansky , Resonance Radiation and ExcitedI4 Atoms, Cambridge, 1934. 10. Herzberg, G., Infrared and Raman Spectra, Van Nostrand, 1945. 11

  14. Investigation of the formaldehyde differential absorption cross section at high and low spectral resolution in the simulation chamber SAPHIR

    Directory of Open Access Journals (Sweden)

    T. Brauers

    2007-07-01

    Full Text Available The results from a simulation chamber study on the formaldehyde (HCHO absorption cross section in the UV spectral region are presented. We performed 4 experiments at ambient HCHO concentrations with simultaneous measurements of two DOAS instruments in the atmosphere simulation chamber SAPHIR in Jülich. The two instruments differ in their spectral resolution, one working at 0.2 nm (broad-band, BB-DOAS, the other at 2.7 pm (high-resolution, HR-DOAS. Both instruments use dedicated multi reflection cells to achieve long light path lengths of 960 m and 2240 m, respectively, inside the chamber. During two experiments HCHO was injected into the clean chamber by thermolysis of well defined amounts of para-formaldehyde reaching mixing rations of 30 ppbV at maximum. The HCHO concentration calculated from the injection and the chamber volume agrees with the BB-DOAS measured value when the absorption cross section of Meller and Moortgat (2000 and the temperature coefficient of Cantrell (1990 were used for data evaluation. In two further experiments we produced HCHO in-situ from the ozone + ethene reaction which was intended to provide an independent way of HCHO calibration through the measurements of ozone and ethene. However, we found an unexpected deviation from the current understanding of the ozone + ethene reaction when CO was added to suppress possible oxidation of ethene by OH radicals. The reaction of the Criegee intermediate with CO could be 240 times slower than currently assumed. Based on the BB-DOAS measurements we could deduce a high-resolution cross section for HCHO which was not measured directly so far.

  15. Photoluminescence and Optical Absorption of Pure NanocrystallineTiO2 Anatase and Rutile at Room Temperature

    Directory of Open Access Journals (Sweden)

    L. Kernazhitsky

    2013-10-01

    Full Text Available The optical absorption and photoluminescence of nanocrystalline TiO2 samples of anatase and rutile were investigated at room temperature. Nanocrystalline TiO2 samples were synthesized in the form of pure anatase or rutile and studied by X-ray diffraction, X-ray fluorescence, Raman spectroscopy, optical absorption and photoluminescence (PL. PL was studied at room temperature when excited by intense UV (3.68 eV by a nitrogen laser. For the first time for nanocrystalline TiO2 a features in the high-resolution PL spectra, including the exciton band and interband transitions were registered. It is concluded that the processes of absorption and emission of light near the edge of the forbidden zone occur with the participation of the same electronic transitions. PL bands, including the peaks at 2.71-2.81 eV in the anatase and rutile arise due to exciton recombination in the TiO2 lattice oxygen vacancies. The exciton peak at 2.91 eV is attributed to the recombination of self-trapped excitons in anatase or to the free exciton in rutile, respectively. PL bands within 3.0-3.3 eV attributed to indirect and direct allowed transitions due to electron-hole recombination. PL bands at 3.03 eV and 3.26 eV, attributed to the emission of free excitons near the fundamental absorption edge of rutile and anatase, respectively. The influence of TiO2 crystal structure and calcination temperature of the samples on the PL spectra and optical absorbtion is discussed.

  16. Highly specific spectroscopic photoacoustic molecular imaging of dynamic optical absorption shifts of an antibody-ICG contrast agent (Conference Presentation)

    Science.gov (United States)

    Wilson, Katheryne E.; Bachawal, Sunitha; Abou-Elkacem, Lotfi; Jensen, Kristen C.; Machtaler, Steven; Tian, Lu; Willmann, Juergen K.

    2017-03-01

    Improved techniques for breast cancer screening are critically needed as current methods lack diagnostic accuracy. Using spectroscopic photoacoustic (sPA) molecular imaging with a priori knowledge of optical absorption spectra allows suppression of endogenous background signal, increasing the overall sensitivity and specificity of the modality to exogenous contrast agents. Here, sPA imaging was used to monitor antibody-indocyanine green (ICG) conjugates as they undergo optical absorption spectrum shifts after cellular endocytosis and degradation to allow differentiation between normal murine mammary glands from breast cancer by enhancing molecular imaging signal from target (B7-H3)-bound antibody-ICG. First, B7-H3 was shown to have highly specific (AUC of 0.93) expression on both vascular endothelium and tumor stroma in malignant lesions through quantitative immunohistochemical staining of B7-H3 on 279 human samples (normal (n=53), benign lesions (11 subtypes, n=182), breast cancers (4 subtypes, n=97)), making B7-H3 a promising target for sPA imaging. Second, absorption spectra of intracellular and degraded B7-H3-ICG and Isotype control (Iso-ICG) were characterized through in vitro and in vivo experiments. Finally, a transgenic murine breast cancer model (FVB/N-Tg(MMTVPyMT)634Mul) was imaged, and sPA imaging in found a 3.01 (IQR 2.63, 3.38, Panimals (n=60), Iso-ICG (n=30), blocking B7-H3+B7-H3-ICG (n=20), and free ICG (n=20)) despite significant tumor accumulation of Iso-ICG, confirmed through ex vivo histology. Overall, leveraging anti-B7-H3 antibody-ICG contrast agents, which have dynamic optical absorption spectra representative of molecular interactions, allows for highly specific sPA imaging of murine breast cancer.

  17. A theoretical analysis of the optical absorption properties in one-dimensional InAs/GaAs quantum dot superlattices

    Energy Technology Data Exchange (ETDEWEB)

    Kotani, Teruhisa, E-mail: kotani.teruhisa@sharp.co.jp [Advanced Technology Research Laboratories, Sharp Corporation, 2613-1 Ichinomoto-cho, Tenri, Nara 632-8567 (Japan); Institute for Nanoelectronics, Technische Universität München, Arcisstr. 21, 80333 Munich (Germany); Birner, Stefan [Institute for Nanoelectronics, Technische Universität München, Arcisstr. 21, 80333 Munich (Germany); Walter Schottky Institute, Technische Universität München, Am Coulombwall 4, 85748 Garching (Germany); Lugli, Paolo [Institute for Nanoelectronics, Technische Universität München, Arcisstr. 21, 80333 Munich (Germany); Hamaguchi, Chihiro [Advanced Technology Research Laboratories, Sharp Corporation, 2613-1 Ichinomoto-cho, Tenri, Nara 632-8567 (Japan)

    2014-04-14

    We present theoretical investigations of miniband structures and optical properties of InAs/GaAs one-dimensional quantum dot superlattices (1D-QDSLs). The calculation is based on the multi-band k·p theory, including the conduction and valence band mixing effects, the strain effect, and the piezoelectric effect; all three effects have periodic boundary conditions. We find that both the electronic and optical properties of the 1D-QDSLs show unique states which are different from those of well known single quantum dots (QDs) or quantum wires. We predict that the optical absorption spectra of the 1D-QDSLs strongly depend on the inter-dot spacing because of the inter-dot carrier coupling and changing strain states, which strongly influence the conduction and valence band potentials. The inter-miniband transitions form the absorption bands. Those absorption bands can be tuned from almost continuous (closely stacked QD case) to spike-like shape (almost isolated QD case) by changing the inter-dot spacing. The polarization of the lowest absorption peak for the 1D-QDSLs changes from being parallel to the stacking direction to being perpendicular to the stacking direction as the inter-dot spacing increases. In the case of closely stacked QDs, in-plane anisotropy, especially [110] and [11{sup ¯}0] directions also depend on the inter-dot spacing. Our findings and predictions will provide an additional degree of freedom for the design of QD-based optoelectronic devices.

  18. Optical absorption and DFT calculations in L-aspartic acid anhydrous crystals: Charge carrier effective masses point to semiconducting behavior

    Science.gov (United States)

    Silva, A. M.; Silva, B. P.; Sales, F. A. M.; Freire, V. N.; Moreira, E.; Fulco, U. L.; Albuquerque, E. L.; Maia, F. F., Jr.; Caetano, E. W. S.

    2012-11-01

    Density functional theory (DFT) computations within the local-density approximation and generalized gradient approximation in pure form and with dispersion correction (GGA+D) were carried out to investigate the structural, electronic, and optical properties of L-aspartic acid anhydrous crystals. The electronic (band structure and density of states) and optical absorption properties were used to interpret the light absorption measurements we have performed in L-aspartic acid anhydrous crystalline powder at room temperature. We show the important role of the layered spatial disposition of L-aspartic acid molecules in anhydrous L-aspartic crystals to explain the observed electronic and optical properties. There is good agreement between the GGA+D calculated and experimental lattice parameters, with (Δa, Δb, Δc) deviations of (0.029,-0.023,-0.024) (units in Å). Mulliken [J. Chem. Phys.JCPSA60021-960610.1063/1.1740588 23, 1833 (1955)] and Hirshfeld [Theor. Chim. ActaTCHAAM0040-574410.1007/BF00549096 44, 129 (1977)] population analyses were also performed to assess the degree of charge polarization in the zwitterion state of the L-aspartic acid molecules in the DFT converged crystal. The lowest-energy optical absorption peaks related to transitions between the top of the valence band and the bottom of the conduction band involve O 2p valence states and C 1p and O 2p conduction states, with the carboxyl and COOH lateral chain group contributing significantly to the energy band gap. Among the calculated band gaps, the lowest GGA+D (4.49-eV) gap is smaller than the experimental estimate of 5.02 eV, as obtained by optical absorption. Such a wide-band-gap energy together with the small carrier effective masses estimated from band curvatures allows us to suggest that an L-aspartic acid anhydrous crystal can behave as a wide-gap semiconductor. A comparison of effective masses among directions parallel and perpendicular to the L-aspartic molecules layers reveals that charge

  19. Linear intersubband optical absorption in the semiparabolic quantum wells based on AlN/AlGaN/AlN under a uniform electric field

    Science.gov (United States)

    Tien, Nguyen Thanh; Hung, Nguyen Nhut Tuan; Nguyen, Tieu Tin; Thao, Pham Thi Bich

    2017-08-01

    The linear intersubband optical absorption in the polarization semiparabolic quantum wells (SPQWs) are investigated for typical AlN/AlxGa 1-x N/AlN. First, the one-dimensional Poisson and Schrödinger equations have been solved by the variational method within a finite potential barrier model and a bent band figured by all confinement sources (realistic model). Then, the intersubband optical absorption between the lowest two subbands has been theoretically studied under an uniform external electric field. Computed results including the effective confining potential profile, the wave function and the distribution of electron gas in quantum wells, intersubband optical absorption coefficient have been discussed. Our calculation shows that the positive interface polarization charges affect on the distribution of the two-dimensional electron gas (2DEG) in SPQWs so it has great influences on the total optical absorption coefficients significantly.

  20. Direction dependence of the magneto-optical absorption in nanowires with Rashba interaction

    Energy Technology Data Exchange (ETDEWEB)

    Sakr, M.R., E-mail: msakr@alexu.edu.eg

    2016-09-16

    We study the directional dependence of the absorption spectrum of ballistic nanowires in the presence of gate-controlled Rashba spin–orbit interaction and an in-plane magnetic field. In the weak Rashba regime, our analytical and numerical results show that the absorption peaks associated with the first and third intersubband transitions exhibit frequency shifts and strong amplitude modulations as the direction of the magnetic field changes. If the field is parallel to the nanowire axis, these peaks disappear and the resonance frequencies of the whole absorption spectrum are given merely in terms of the Zeeman splitting and the energy scale characterizing the confinement potential. The second transition has an absorption peak that suffers an opposite frequency shift with amplitude that is largely direction independent. The amplitude modulation and frequency shift of the absorption spectrum is periodic in the angle that the magnetic field makes with the nanowire axis. - Highlights: • Absorption spectrum of the nanowire is calculated in the weak Rashba regime. • First and third absorption peaks show amplitude and frequency modulation. • They disappear if the magnetic field is along the wire axis, forbidden transitions. • The second transition peak shows frequency shift with minor amplitude modulation. • The frequency and amplitude modulations are periodic in the direction of the field.