WorldWideScience

Sample records for operational life extension

  1. Operational data collection and analysis for nuclear plant life extension

    International Nuclear Information System (INIS)

    DuCharme, A.R.; Berg, R.M.; Bailey, T.L.

    1989-01-01

    This paper describes initial work undertaken by the US Department of Energy, through Sandia National Laboratories in Albuquerque, New Mexico, to define the operational data necessary for support of nuclear plant life extension (PLEX) programs. This work is being performed in coordination with the Working Group on Plant Life Extension of the US Nuclear Management and Resources Council. The intent of the effort is to use results gained initially from pilot PLEX programs a US BWR and a US PWR to build towards the use of ''PLEX indicators'' by which a plant's readiness for successful life extension can be measured. Another objective of the study was to examine chemistry data in detail to determine how well US plants are collecting, preserving, and trending the chemistry data that is important to PLEX. The methods used to disseminate this data to outside agencies and other utilities were studied. Finally, an analysis was made to determine additional chemistry data needed to support PLEX

  2. Plant-life extension planning for an operating LMFBR

    International Nuclear Information System (INIS)

    King, R.W.

    1985-01-01

    The study concluded that continued EBR-II operation is certainly feasible for well beyond 10 more years, and that continued demonstration of the unique inherent safety and operability features of a pool-type liquid-metal-cooled reactor and the demonstration of a reasonable operating lifetime are very important and will provide invaluable information for the design and development of the next generation nuclear power plants

  3. Nuclear plant life extension

    International Nuclear Information System (INIS)

    Negin, C.A.

    1989-01-01

    The nuclear power industry's addressing of life extension is a natural trend in the maturation of this technology after 20 years of commercial operation. With increasing emphasis on how plants are operated, and less on how to build them, attention is turning on to maximizing the use of these substantial investments. The first studies of life extension were conducted in the period from 1978 and 1982. These were motivated by the initiation, by the Nuclear Regulatory Commission (NRC), of studies to support decommissioning rulemaking. The basic conclusions of those early studies that life extension is feasible and worth pursuing have not been changed by the much more extensive investigations that have since been conducted. From an engineering perspective, life extension for nuclear plants is fundamentally the same as for fossil plants

  4. A service life extension (SLEP) approach to operating aging aircraft beyond their original design lives

    Science.gov (United States)

    Pentz, Alan Carter

    With today's uncertain funding climate (including sequestration and continuing budget resolutions), decision makers face severe budgetary challenges to maintain dominance through all aspects of the Department of Defense (DoD). To meet war-fighting capabilities, the DoD continues to extend aircraft programs beyond their design service lives by up to ten years, and occasionally much more. The budget requires a new approach to traditional extension strategies (i.e., reuse, reset, and reclamation) for structural hardware. While extending service life without careful controls can present a safety concern, future operations planning does not consider how much risk is present when operating within sound structural principles. Traditional structural hardware extension methods drive increased costs. Decision makers often overlook the inherent damage tolerance and fatigue capability of structural components and rely on simple time- and flight-based cycle accumulation when determining aircraft retirement lives. This study demonstrates that decision makers should consider risk in addition to the current extension strategies. Through an evaluation of eight military aircraft programs and the application and simulation of F-18 turbine engine usage data, this dissertation shows that insight into actual aircraft mission data, consideration of fatigue capability, and service extension length are key factors to consider. Aircraft structural components, as well as many critical safety components and system designs, have a predefined level of conservatism and inherent damage tolerance. The methods applied in this study would apply to extensions of other critical structures such as bridges. Understanding how much damage tolerance is built into the design compared to the original design usage requirements presents the opportunity to manage systems based on risk. The study presents the sensitivity of these factors and recommends avenues for further research.

  5. The impact of the MCU life extension solvent on sludge batch 8 projected operating windows

    International Nuclear Information System (INIS)

    Peeler, D.K.; Edwards, T.B.

    2013-01-01

    As a part of the Actinide Removal Process (ARP)/Modular Caustic Side Solvent Extraction Unit (MCU) Life Extension Project, a next generation solvent (NGS) and a new strip acid will be deployed. The strip acid will be changed from dilute nitric acid to dilute boric acid (0.01 M). Because of these changes, experimental testing or evaluations with the next generation solvent are required to determine the impact of these changes (if any) to Chemical Process Cell (CPC) activities, glass formulation strategies, and melter operations at the Defense Waste Processing Facility (DWPF). The introduction of the dilute (0.01 M) boric acid stream into the DWPF flowsheet has a potential impact on glass formulation and frit development efforts since B203 is a major oxide in frits developed for DWPF. Prior knowledge of this stream can be accounted for during frit development efforts but that was not the case for Sludge Batch 8 (SB8). Frit 803 has already been recommended and procured for SB8 processing; altering the frit to account for the incoming boron from the strip effluent (SE) is not an option for SB8. Therefore, the operational robustness of Frit 803 to the introduction of SE including its compositional tolerances (i.e., up to 0.0125M boric acid) is of interest and was the focus of this study. The primary question to be addressed in the current study was: What is the impact (if any) on the projected operating windows for the Frit 803 - SB8 flowsheet to additions of B203 from the SE in the Sludge Receipt and Adjustment Tank (SRAT)? More specifically, will Frit 803 be robust to the potential compositional changes occurring in the SRAT due to sludge variation, varying additions of ARP and/or the introduction of SE by providing access to waste loadings (WLs) of interest to DWPF? The Measurement Acceptability Region (MAR) results indicate there is very little, if any, impact on the projected operating windows for the Frit 803 - SB8 system regardless of the presence or absence of

  6. Plant life extensions for German nuclear power plants? Controversial discussion profit taking of nuclear power plant operators

    International Nuclear Information System (INIS)

    Matthes, Felix C.

    2009-10-01

    The discussion on the plant life extensions for German nuclear power plants beyond the residual quantity of electricity particularly focus on three aspects: Effects for the emission of carbon dioxide as a greenhouse gas; Development of the electricity price for which a reduction or attenuation is postulated due to a plant life extension; Skimming of additional profits at operating companies and their use in the safeguarding of the future (development of renewable energies, support of energy efficiency, promotion of the research, consolidation of the public budget, and so on). Under this aspect, the author of the contribution under consideration reports on the profit taking of nuclear power plant operators. The presented analysis considers three aspects: (a) Specification of the quantity structures for the investigated model of plant life extension; (b) The decisive parameter is the revenue situation and thus the price development for electricity at wholesale markets; (c) Determination and evaluation of the course in time of the profit taking.

  7. Life extension economic analysis

    International Nuclear Information System (INIS)

    Smithling, A.P.

    1992-01-01

    Life extension economic analyses of fossil fueled power plants need the development of consistent methods which consider the capital costs associated with component replacement or repair and estimates of normal station capital expenditures over the units remaining life. In order to link capital and production costs, Niagra Mohawk Power Corp. develops most and worst cases. A most case includes capital components that would definitely need replacement or modification for life extension. The worst case scenario contains must case capital costs plus various components which may need replacement or modification. In addition, two forecasted conditions are used, base case capacity and low capacity

  8. The Impact Of The MCU Life Extension Solvent On Sludge Batch 8 Projected Operating Windows

    International Nuclear Information System (INIS)

    Peeler, D. K.; Edwards, T. B.; Stone, M. E.

    2013-01-01

    As a part of the Actinide Removal Process (ARP)/Modular Caustic Side Solvent Extraction Unit (MCU) Life Extension Project, a next generation solvent (NGS) and a new strip acid will be deployed. The strip acid will be changed from dilute nitric acid to dilute boric acid (0.01 M). Because of these changes, experimental testing or evaluations with the next generation solvent are required to determine the impact of these changes (if any) to Chemical Process Cell (CPC) activities, glass formulation strategies, and melter operations at the Defense Waste Processing Facility (DWPF). The introduction of the dilute (0.01M) boric acid stream into the DWPF flowsheet has a potential impact on glass formulation and frit development efforts since B2O3 is a major oxide in frits developed for DWPF. Prior knowledge of this stream can be accounted for during frit development efforts but that was not the case for Sludge Batch 8 (SB8). Frit 803 has already been recommended and procured for SB8 processing; altering the frit to account for the incoming boron from the strip effluent (SE) is not an option for SB8. Therefore, the operational robustness of Frit 803 to the introduction of SE including its compositional tolerances (i.e., up to 0.0125M boric acid) is of interest and was the focus of this study. The primary question to be addressed in the current study was: What is the impact (if any) on the projected operating windows for the Frit 803 - SB8 flowsheet to additions of B2O3 from the SE in the Sludge Receipt and Adjustment Tank (SRAT)? More specifically, will Frit 803 be robust to the potential compositional changes occurring in the SRAT due to sludge variation, varying additions of ARP and/or the introduction of SE by providing access to waste loadings (WLs) of interest to DWPF? The Measurement Acceptability Region (MAR) results indicate there is very little, if any, impact on the projected operating windows for the Frit 803 - SB8 system regardless of the presence or absence of

  9. NDE and plant life extension

    International Nuclear Information System (INIS)

    Liu, S.N.; Ammirato, F.V.; Nottingham, L.D.

    1991-01-01

    Component life extension is the process of making run-repair-replace decisions for plant components and includes a thorough analysis of the capability of the component to perform throughout the projected lifetime. For many critical plant components, nondestructive evaluation (NDE) is essential in determining whether the component can be operated safely and economically in the extended life period and to help utilities determine safe and economic inspection intervals. NDE technology is required for not only detecting defects that could grow to a size of concern during extended lifetimes, but also will be called upon to measure and monitor accumulating material degradation that strongly affects component reliability. This paper discusses the role of NDE in life extension by reviewing three examples--a reactor pressure vessel, steam turbine-generator rotors, and generator retaining rings. In each example, the contribution of NDE to life extension decisions is described. (author)

  10. Long Term Operation R and D to Investigate the Technical Basis for Life Extension and License Renewal Decisions

    International Nuclear Information System (INIS)

    Gaertner, John

    2012-01-01

    Establishing an improved technical basis for long term operation of existing plants is a nuclear industry priority. The Electric Power Research Institute (EPRI) has responded with a comprehensive Long Term Operation (LTO) Program addressing this need for existing nuclear power plants world-wide. The program supports both the business decisions necessary to achieve high performance operation and the licensing requirements for operation beyond 60 years. The program selects its R and D priorities in a structured and objective way with much industry input to provide useful results for decisions in the 2014 to 2019 time frame. The program is highly collaborative with U.S. Department of Energy (DOE) and with EPRI-member utilities. The R and D portfolio includes materials aging (metals, concrete, and cables), modernization of information and control technology, enhanced safety analysis, advanced fuel design, demonstration plant activities, life cycle management, and identification of aging management program need for subsequent license renewal. The program has focussed stakeholders world-wide on the technical issues of long term operation, and it is on-track to provide practical results for life extension and license renewal decisions. (author)

  11. IEA-R1 research reactor: operational life extension and considerations regarding future decommissioning

    International Nuclear Information System (INIS)

    Frajndlich, Roberto

    2009-01-01

    The IEA-R1 reactor is a pool type research reactor moderated and cooled by light water and uses graphite and beryllium reflectors. The reactor is located at the Instituto de Pesquisas Energeticas e Nucleares (IPEN-CNEN/SP), in the city of Sao Paulo, Brazil. It is the oldest research reactor in the southern hemisphere and one of the oldest of this kind in the world. The first criticality of the reactor was obtained on September 16, 1957. Given the fact that Brazil does not have yet a definitive radioactive waste repository and a national policy establishing rules for the spent fuel storage, the institutions which operate the research reactors for more than 50 years in the country have searched internal solutions for continued operation. This paper describes the spent fuel assemblies and radioactive waste management process for the IEA-R1 reactor and the refurbishment and modernization program adopted to extend its lifetime. Some considerations about the future decommissioning of the reactor are also discussed which, in my opinion, might help the operating organization to make decisions about financial, legal and technical aspects of the decommissioning procedures in a time frame of 10-15 years(author)

  12. Challenges in the Licensing of New Nuclear Power Plant, Service Life Extension of Operating Ones (Safeguards-Safety-Security Aspects)

    International Nuclear Information System (INIS)

    Horvath, K.

    2016-01-01

    The Hungarian Atomic Energy Authority (HAEA), as the Hungarian nuclear regulator is faced with dual challenges meant by the licensing of the planned construction of two AES-2006 type nuclear power plant units and the licensing of the service life extension of the existing units that have been operating for more than 30 years. The HAEA has full regulatory competence; its mission is to oversee the safety and security of all the peaceful applications of atomic energy. Accordingly, the licensing scope covers safeguards, safety as well as security. The paper shows the current status of the Hungarian nuclear programme and the future plans, as well as summarizes the regulatory approach followed by HAEA. (author)

  13. Boiler-turbine life extension

    Energy Technology Data Exchange (ETDEWEB)

    Natzkov, S. [TOTEMA, Ltd., Sofia (Bulgaria); Nikolov, M. [CERB, Sofia (Bulgaria)

    1995-12-01

    The design life of the main power equipment-boilers and turbines is about 105 working hours. The possibilities for life extension are after normatively regulated control tests. The diagnostics and methodology for Boilers and Turbines Elements Remaining Life Assessment using up to date computer programs, destructive and nondestructive control of metal of key elements of units equipment, metal creep and low cycle fatigue calculations. As well as data for most common damages and some technical decisions for elements life extension are presented.

  14. Status and Perspectives of Nuclear Reactor Pressure Vessel Life Extension up to 60 Years Operation in Belgium

    Energy Technology Data Exchange (ETDEWEB)

    Lucon, E.; Chaouadi, R.; Scibetta, M.; Van Walle, E.

    2009-09-15

    The scope of this report involves a safety evaluation of the reactor pressure vessel (RPV) against neutron embrittlement, in the most severely irradiation region (belt line) and in the event of a pressurized thermal shock. The irreplaceable RPV is considered to be the most critical component for lifetime considerations of the nuclear power plant. However, an application for operation extension will also depend upon a number of additional considerations, including the technical assessment of other plant components, as well as non-technical arguments (e.g. political, environmental, economical, strategical that are outside the scope this report. In the hypothesis of a request for operation extension, it is the responsibility of the utilities to provide the safety authorities with an exhaustive dossier demonstrating that safe extended operation is guaranteed. The role of the safety authorities is to critically evaluate the safety dossier for eventually granting the operation extension.

  15. Status and Perspectives of Nuclear Reactor Pressure Vessel Life Extension up to 60 Years Operation in Belgium

    International Nuclear Information System (INIS)

    Lucon, E.; Chaouadi, R.; Scibetta, M.; Van Walle, E.

    2009-01-01

    The scope of this report involves a safety evaluation of the reactor pressure vessel (RPV) against neutron embrittlement, in the most severely irradiation region (belt line) and in the event of a pressurized thermal shock. The irreplaceable RPV is considered to be the most critical component for lifetime considerations of the nuclear power plant. However, an application for operation extension will also depend upon a number of additional considerations, including the technical assessment of other plant components, as well as non-technical arguments (e.g. political, environmental, economical, strategical that are outside the scope this report. In the hypothesis of a request for operation extension, it is the responsibility of the utilities to provide the safety authorities with an exhaustive dossier demonstrating that safe extended operation is guaranteed. The role of the safety authorities is to critically evaluate the safety dossier for eventually granting the operation extension.

  16. Managing BWR plant life extension

    International Nuclear Information System (INIS)

    Ianni, P.W.; Kiss, E.

    1985-01-01

    Recent studies have confirmed that extending the useful life of a large nuclear plant can be justified with very high cost benefit ratio. In turn, experience with large power plant systems and equipment has shown that a well-integrated and -managed plan is essential in order to achieve potential economic benefits. Consequently, General Electric's efforts have been directed at establishing a life extension plan that considers alternative options and cost-effective steps that can be taken in early life, those appropriate during middle life, and those required in late life. This paper briefly describes an approach designed to provide the plant owner a maximum of flexibility in developing a life extension plan

  17. Life extension and life cycle management

    International Nuclear Information System (INIS)

    Hoang, H.

    2010-10-01

    To continue the effort of nuclear energy as the clean energy offsetting the increase in greenhouse gas emission that contributes to the increased global warming effect, the nuclear industry is focused on the optimization of their current nuclear generation assets. Plant life extension (Plex) and Plant life management (Plim), together with power up rate, are the key strategies for the optimization effort. Plex begins with the process to obtain the regulatory approval for an additional 20 years of operation, beyond the current 40-year limit. This highly standardized process consists of the following steps: 1) Scoping: identify the systems, structures and components for inclusion in the license renewal scope of work. 2) Screening: narrow down the selection of the in-scope systems, structures and components based on passive and long-lived characteristics. 3) Aging management review: demonstrate that aging effects will continue to be managed during the additional 20 years of operation. 4) Time limiting aging analyses: confirm the acceptability of design bases analyses that assume the 40-year plant life as a key input assumptions. To provide a consistent approach for the preparation of the license renewal application, the following are the key guidance documents: NUREG-1800: Standard review plan; NUREG-1801: Generic aging lessons learned; Nuclear Energy Institute NEI 95-10. The objectives of Plim are to focus on improving plant reliability/availability, and to plan for equipment upgrades for efficiency improvement as well as technological obsolescence. Plim is a technical evaluation combined with a risk assessment to produce a long-range business plant with a time horizon of 10 years or longer. Due to its long view nature, this plan will be reviewed on a yearly basis for any required adjustments. The technical evaluation consists of the following major steps: 1) Select systems, structures and components with performance deficiencies experience. 2) Collect operating data

  18. Economic case for CANDU life extension projects

    International Nuclear Information System (INIS)

    Qureshi, S.; Tenev, T.; Lewi, M.

    2014-01-01

    As CANDU reactors approach their original end of design life utilities are faced with two options: to extend the operating life of the reactor by undergoing a life extension project (LEP), or to commence decommissioning activities. Recent project experience has shown that there is economic merit in extending the life of the operating reactor. There are many benefits to such a decision, the most obvious being the revenue that will be generated from the additional years of electricity production by the utility. Delays in decommissioning are also advantageous since the large costs associated with such a long-term activity are pushed into the future, thereby decreasing the net present value (NPV) of the investment. In addition, relatively few power reactors have been fully decommissioned to date and deferring this activity transfers the associated risks to others that are currently obligated to undertake decommissioning activities sooner. Candu Energy has been involved with the life extension projects of the following CANDU reactors: Point Lepreau (New Brunswick, Canada), Bruce Unit 1 and Unit 2 (Ontario, Canada), and Wolsong Unit 1 (South Korea). These reactors underwent fuel channel replacement programs in addition to replacement of major reactor components. Most recently, both Ontario Power Generation (OPG) and Nucleoelectrica Argentina Sociedad Anonima (NA-SA) have commenced work on life extension projects at the Darlington (Canada) and Embalse (Argentina) sites respectively. The experience gained from previous LEP projects allows Candu Energy to deliver future projects in a timely, efficient, and cost effective manner. (author)

  19. Japanese plant life extension program

    International Nuclear Information System (INIS)

    Yoshitsugu, M.

    1988-01-01

    As one of the main items of up-grading light water reactor program in Japan, plant life extension has been recommended by Advisory Committee of Ministry of International trade and Industry and the practical work has begun to be carried out. It is overviewed here. After preliminary works, including investigation on the state of the arts through a entrusted survey work, participation in international meetings and exchange of informations with related organizations, actual work has just started. So-called critical components based on our experience during the past 17 years have been listed up and some experimental works inaugurated as from 1987

  20. Extension of life of nuclear power stations

    International Nuclear Information System (INIS)

    Takahashi, Hideaki

    1991-01-01

    At the time of designing nuclear power stations, as their service life, generally 40 years are taken, and the basic design specifications of machinery and equipment are determined. In USA where atomic energy has been developed, the new construction of nuclear power stations is cased for a while, however, if this situation continues as it is, since old power stations reach the service life of 40 years and are retired in near future, it is feared that the circumstance of the total amount of power generation becoming short will occur. As one of the countermeasures to this, the research on the extension of life of nuclear power stations has been carried out in many fields in USA, and it is expected that the application for extending the life for the power stations constructed in the initial period of development is submitted in 1991. The researches that have been carried out for solving the technical problems in this extension of life and the situation in Japan are reported. The NEC of USA decided that the operation period of nuclear power stations in USA, which is considered to be 40 years so far, can be extended up to the limit of 20 years. The background and circumstances of this problem in USA, Nuclear Plant Aging Research Program, Plant Life Extension Program and so on are reported. (K.I.)

  1. Experience of the metal condition examination after 200 thousand hours of operation in view of an opportunity of service life extension

    International Nuclear Information System (INIS)

    Abagyan, A.; Bakirov, M.; Kamyshnikov, O.; Potapov, V.; Ivanenko, I.; Frolov, I.; Zabruskov, N.

    2002-01-01

    In the report the methods and technologies for non-destructive testing of mechanical properties are considered, used by the VNIIAES for the examination of metal condition of elements after 200 thousand hours of operation and within the Program for Life Extension of the units 3 and 4 of the Novo Voronezh NPP and units 1 and 2 of the Kola NPP. The results of the experimental investigations od metal of piping and components by destructive and specimen-free non-destructive methods with the purpose to assess the variation of physical and mechanical properties of steel during extended period after long-term operation are also discussed. The results of the non-destructive analysis allow to expand essentially the scope of examined elements and to obtain data for the assessment of the technical condition and the residual lifetime of piping and components and the investigated units

  2. Extension properties of states on operator algebras

    Science.gov (United States)

    Hamhalter, Jan

    1995-08-01

    We summarize and deepen some recent results concerning the extension problem for states on operator algebras and general quantum logics. In particular, we establish equivalence between the Gleason extension property, the Hahn-Banach extension property, and the universal state extension property of projection logics. Extensions of Jauch-Piron states are investigated.

  3. Life extension of CANDU reactor cores

    International Nuclear Information System (INIS)

    Millard, J.; Kerker, J.; Albert, M.

    2011-01-01

    Candu Energy (formerly AECL), in partnership with station operators, has developed a robust methodology for demonstrating the fitness of reactor core structures, and associated reactivity control devices, as an essential element in conducting a station life extension project. The ageing of reactors is affected by ageing mechanisms impacted by operational history and design related factors such as materials, chemistries and stress distributions. The methodology of this life extension work is based on the IAEA TECDOC 1197; which documents practices for ageing management in CANDU reactors. This paper uses the work in Bruce Units 1 and 2, conducted from 2007 through to 2011, to explain the methodology. The work started with analysis of historical operational conditions and identification of the forms of degradation that could have occurred. The assessment and related inspections considered the safety and pressure boundary significance of each item, as well as its failure modes and margins. It then moved through both general and local inspection, focused mainly inside the calandria vessel once the calandria tubes were removed. The inspection found the bulk of the hardware to be in good condition, with a small number of remediation opportunities. In the course of that remediation some foreign material was sampled and removed. The minor remediation was successful and the work was completed through formal documentation of the fitness for extended life. It has been demonstrated through these analyses and visual inspections that the reactor structures and components inspected are free of indications and active degradation mechanisms that would prevent the safe and reliable operation of Bruce A Units 1 and 2 through its next 25 years of life. (author)

  4. Boiling water reactor life extension monitoring

    International Nuclear Information System (INIS)

    Stancavage, P.

    1991-01-01

    In 1991 the average age of GE-supplied Boiling Water Reactors (BWRs) reached 15 years. The distribution of BWR ages range from three years to 31 years. Several of these plants have active life extension programmes, the most notable of which is the Monticello plant in Minnesota which is the leading BWR plant for license renewal in the United States. The reactor pressure vessel and its internals form the heart of the boiling water reactor (BWR) power plant. Monitoring the condition of the vessel as it operates provides a continuous report on the structural integrity of the vessel and internals. Monitors for fatigue, stress corrosion and neutron effects can confirm safety margins and predict residual life. Every BWR already incorporates facilities to track the key aging mechanisms of fatigue, stress corrosion and neutron embrittlement. Fatigue is measured by counting the cycles experienced by the pressure vessel. Stress corrosion is gauged by periodic measurements of primary water conductivity and neutron embrittlement is tracked by testing surveillance samples. The drawbacks of these historical procedures are that they are time consuming, they lag the current operation, and they give no overall picture of structural integrity. GE has developed an integrated vessel fitness monitoring system to fill the gaps in the historical, piecemetal monitoring of the BWR vessel and internals and to support plant life extension. (author)

  5. Safety reassessment and life extension

    International Nuclear Information System (INIS)

    Gouffon, A.

    1992-12-01

    The safety reassessment policy implemented in France is a means of ensuring that no important point has been overlooked in the continuous safety reassessment process constituted by the integration of operating feedback. It also provides an opportunity for reappraisal of the basic design of a plant and examination of discrepancies between the safety options prevailing when it was built and those currently adopted. After a ten-year operating period, safety reassessment should enable identification of aging effects on structures and equipment, leading to improvement of component servicing and surveillance programs and provision for replacements which could be necessary

  6. Economic modeling for life extension decision making

    International Nuclear Information System (INIS)

    Farber, M.A.; Harrison, D.L.; Carlson, D.D.

    1986-01-01

    This paper presents a methodology for the economic and financial analysis of nuclear plant life extension under uncertainty and demonstrates its use in a case analysis. While the economic and financial evaluation of life extension does not require new analytical tools, such studies should be based on the following three premises. First, the methodology should examine effects at the level of the company or utility system, because the most important economic implications of life extension relate to the altered generation system expansion plan. Second, it should focus on the implications of uncertainty in order to understand the factors that most affect life extension benefits and identify risk management efforts. Third, the methodology should address multiple objectives, at a minimum, both economic and financial objectives

  7. Aging management and life extension

    International Nuclear Information System (INIS)

    Carey, John; Deng, Daniel; Tai, Tom M.

    2004-01-01

    Approximately 20% of the present electric generating capacity in the United States is supplied by nuclear power plants and may be retired due to initial license expiration between the years 2002 and 2030. One of the recommended actions for implementing the National Energy Strategy (Bill H.R. 776) is license renewal of currently operating nuclear power plants which DOE has estimated would save between $800 million and $1 billion in avoided new construction costs - and represent a nationwide benefit of as much as $350 billion - assuming the licenses are renewed for 20 years. The U.S. Atomic Energy Act of 1954 limits the duration of operating licenses of nuclear power plants to a maximum of 40 years but permits their renewal. And, although Title 10, Part 50.51 of Code of Federal Regulations (10CFR50.51) permitted license renewal, it provided no standards or procedures for renewal applications. License renewal requirements were established on January 13, 1992 when NRC's Final Rule (10 CFR Part 54) went into effect. The Final rule established the requirements that an applicant for license renewal must meet, the information that must be submitted to the NRC for review. This involves the performance of an Integrated Plant Assessment (IPA) which is designed to ensure that the effects of aging on important equipment will be adequately managed during the renewal term. The issuance of 10 CFR Part 54 established the regulatory and legal requirements for license renewal. The technical basis for, or viability of, license renewal has been explored by the Electric Power Research Institute (EPRI) since the late 1970s/early 1980s. The NRC as well as industry organizations such as EPRI have studied aging effects for close to two decades. The NRC's research program on plant aging degradation, which began formally in the early 1980s, is a comprehensive effort for the understanding and management of age-related degradation in safety-related systems, structures, and components (SSCs) and

  8. Plant life extensions for German nuclear power plants? Controversial discussion profit taking of nuclear power plant operators; Laufzeitverlaengerungen fuer die deutschen Kernkaftwerke? Kurzanalyse zu den Gewinnmitnahmen der KKW-Betreiber

    Energy Technology Data Exchange (ETDEWEB)

    Matthes, Felix C.

    2009-10-15

    The discussion on the plant life extensions for German nuclear power plants beyond the residual quantity of electricity particularly focus on three aspects: Effects for the emission of carbon dioxide as a greenhouse gas; Development of the electricity price for which a reduction or attenuation is postulated due to a plant life extension; Skimming of additional profits at operating companies and their use in the safeguarding of the future (development of renewable energies, support of energy efficiency, promotion of the research, consolidation of the public budget, and so on). Under this aspect, the author of the contribution under consideration reports on the profit taking of nuclear power plant operators. The presented analysis considers three aspects: (a) Specification of the quantity structures for the investigated model of plant life extension; (b) The decisive parameter is the revenue situation and thus the price development for electricity at wholesale markets; (c) Determination and evaluation of the course in time of the profit taking.

  9. Economic modelling for life extension decision making

    International Nuclear Information System (INIS)

    Farber, M.A.; Harrison, D.L.; Carlson, D.D.

    1987-01-01

    This paper presents a methodology for the economic and financial analysis of nuclear plant life extension under uncertainty and demonstrates its use in a case analysis. While the economic and financial evaluation of life extension does not require new analytical tools, such studies should be based on the following three premises. First, the methodology should examine effects at the level of the company or utility system, because the most important economic implications of life extension relate to the altered generation system expansion plan. Second, it should focus on the implications of uncertainty in order to understand the factors that most affect life extension benefits and identify risk management efforts. Third, the methodology should address multiple objectives, at a minimum, both economic and financial objectives. An analysis of the role of life extension for Virginia Power's generating system was performed using the MIDAS model, developed by the Electric Power Research Institute. MIDAS is particularly well suited to this type of study because of its decision analysis framework. The model incorporates modules for load analysis, capacity expansion, production costing, financial analysis, and rates. The decision tree structure facilitates the multiple-scenario analysis of uncertainty. The model's output includes many economic and financial measures, including capital expenditures, fuel and purchases power costs, revenue requirements, average rates, external financing requirements, and coverage ratio. Based on findings for Virginia Power's Surry 1 plant, nuclear plant life extension has economic benefits for a utility's customers and financial benefits for the utility's investors. These benefits depend on a number of economic, technical and regulatory factors. The economic analysis presented in this paper identifies many of the key factors and issues relevant to life extension planning

  10. Life extension of the St. Lucie unit 1 reactor vessel

    International Nuclear Information System (INIS)

    Rowan, G.A.; Sun, J.B.; Mott, S.L.

    1991-01-01

    In late 1989, Florida Power and Light Company (FP and L) established the policy that St. Lucie unit 1 should not be prevented from achieving a 60-yr operating life by reactor vessel embrittlement. A 60-yr operating life means that the plant would be allowed to operate until the year 2036, which is 20 years beyond the current license expiration date of 2016. Since modifications to the reactor vessel and its components are projected to be expensive, the desire of FP and L management was to achieve this lifetime extension through the use of fuel management and proven technology. The following limitations were placed on any acceptable method for achieving this lifetime extension capability: low fuel cycle cost; low impact on safety parameters; very little or no operations impact; and use of normal reactor materials. A task team was formed along with the Advanced Nuclear Fuels Company (ANF) to develop a vessel-life extension program

  11. Structural considerations in nuclear life extension

    International Nuclear Information System (INIS)

    Dodson, W.B.; McHale, P.F.

    1986-01-01

    The ability to extend the licensed life of a nuclear power plant requires that technical, economic, and regulatory criteria be satisfied. Two ongoing Electric Power Research Institute/US Department of Energy funded pilot studies are looking at the technical and economic aspects from a plant wide viewpoint to life extension. In each, structures have been identified to have a potentially strong effect on the viability for extended life because of the possible major cost, schedule, and person-rem factors should major refurbishment, modifications, or replacement be required. This paper reviews the degradation mechanisms and counterbalancing design features for one of these pilot plants in the studies. It further reviews the recommended ongoing practices to be followed to better ensure that life extension for the structures remains a future option

  12. Radurisation of broilers for shelf life extension

    International Nuclear Information System (INIS)

    Bok, H.E.; Holzapfel, W.H.; Van der Linde, H.J.

    1982-01-01

    Radurization is discussed as a method for the shelf life extension of refrigerated chicken carcasses. One of the advantages is that radurization eliminates potential food pathogenic bacteria like Salmonella in the chicken carcasses. Materials and methods for the radurization of chicken are discussed. The objective of the investigation was to determine the influence of different irradiation doses and storage conditions on the microbiological shelf life and organoleptic quality of fresh broilers

  13. Nuclear power plants life extension and decommissioning its economic aspects

    International Nuclear Information System (INIS)

    Watanabe, Yoshiaki

    1994-06-01

    In USA where the development of nuclear power was started early, the life of nuclear power plants expires successively around the turn of century, and the serious hindrance to electric power supply is feared. Therefore, the research for extending 40 year approved period of operation is in progress. By the extension of life of nuclear power plants, huge cost reduction is estimated as compared with the construction of new plants. However, due to the rise of the cost for the life extension, there were the cases of forced decommissioning. In this book, the present state of the life extension of nuclear power stations, the economical assessment and analysis of the life extension by DOE, the economical assessment by MIDAS method of Electric Power Research Institute, the economical assessment by cost-benefit method of Northern States Power Co., the assessment of the long term operation possibility of nuclear power stations, the economical assessment system for the life extension in Japan, the present state of the decommissioning of nuclear power stations and that in USA, Canada and Europe, the assessment of the decommissioning cost by OECD/NEA, and the decommissioning cost for thermal power stations are described. (K.I.)

  14. Proceedings of the topical meeting on nuclear power plant life extension

    International Nuclear Information System (INIS)

    Anon.

    1988-01-01

    This book contains the proceedings of the topical meeting on nuclear power plant life extension. The sessions are organized under the following headings: Perspectives on nuclear power plant life extension, the potential for additional years of power production, NRC and industry life extension initiatives, concrete and structures degradation and evaluation of useful remaining life, plant life extension programs, Reactor pressure vessel and intervals degradation and evaluation of useful remaining life, life extension decision making issues and institutions, systems degradation and evaluation of remaining life, monitoring and repair, design records and maintenance activities for life extension, Mechanical and electrical component degradation and evaluation of remaining life, expert systems and other techniques for enhanced and continued operation, life extension aspect of codes, standards, and related technologies, piping and valve degradation and evaluation of useful remaining life

  15. Application of annealing for WWER vessels life extension

    International Nuclear Information System (INIS)

    Badanin, V.I.; Gorynin, I.V.; Nickolaev, V.A.; Dragunov, Y.G.; Fedorov, V.G.

    1989-01-01

    Safe operation of NPP is greatly dependent on the guarantee of reactor vessel brittle failure strength with account for the effect of radiation embrittlement of vessel material. Recovery of irradiated material properties is principally important way to extend radiation life of reactor vessel. The aim of this report is to demonstrate the efficiency of annealing for recovery of vessel material properties and extension of its service-life

  16. Program to justify life extension of older nuclear piping systems

    International Nuclear Information System (INIS)

    Burr, T.K.; Dwight, J.E. Jr.; Morton, D.K.

    1991-01-01

    The Idaho National Engineering Laboratory (INEL) has a history of more than 40 years devoted to the operation of nuclear reactors designed for research and experiments. The Advanced Test Reactor (ATR) is one such operating reactor whose mission requires continued operation for an additional 25 years or more. Since the ATR is approaching its design life of twenty years, life extension evaluations have been initiated. Of particular importance are the associated high temperature, high pressure loop piping system supporting in--reactor experiments. Failure of this piping could challenge core safety margins. Since regulatory rules for nuclear power plant life extension are only in the formulation stage, the current technical guidance on this subject provided by the Department of Energy (DOE) or the commercial nuclear industry is incomplete. In the interim, order to assure continued safe operation of this piping beyond its initial design life, a program has been developed to provide the necessary technical justification for life extension. This paper describes a program that establishes Section 11 of the ASME Boiler and Pressure Vessel Code as the governing criteria document, retains B31.1 as the Code of record for Section 11 activities, specifies additional inservice inspection requirements more strict than Section 11, and relies heavily on flaw detection and fracture mechanics evaluations. 18 refs., 2 figs

  17. Proactive life extension of pressure vessels

    Science.gov (United States)

    Mager, Lloyd

    1998-03-01

    place while our vessels are in service. As the inspection takes place we are able to view a real time image of detected discontinuities on a video monitor. The B-scan ultrasonic technique is allowing us to perform fast accurate examinations covering up to 95% of the surface area of each pressure vessel. Receiving data on 95% of a pressure vessel provides us with a lot of useful information. We use this data to determine the condition of each pressure vessel. Once the condition is known the vessels are classed by risk. The risk level is then managed by making decisions related to repair, operating parameters, accepting and monitoring or replacement of the equipment. Inspection schedules are set at maximum intervals and reinspection is minimized for the vessels that are not at risk. The remaining life of each pressure vessel is determined, mechanical integrity is proven and regulatory requirements are met. Abbott Laboratories is taking this proactive approach because we understand that our process equipment is a critical element for successful operation. A run to failure practice would never allow Abbott Laboratories to achieve the corporation's objective of being the world's leading health care company. Nondestructive state of the art technology and the understanding of its capabilities and limitations are key components of a proactive program for life extension of pressure vessels. 26

  18. Power generation options. Rehabilitation for life extension and cogeneration

    International Nuclear Information System (INIS)

    1993-01-01

    The first step in evaluating a life extension or upgrading project is to determine the project's economic benefit to the utility. A screening study should be performed for as many candidate plants as are available; two of the most useful screening tools for rapid economic analysis of life extension possibilities are: Present Worth Revenue Requirements (PWRR) Analysis, and Life Cycle Cost (LCC) Analysis. (Examples of both methods are discussed). PWRR analysis considers only the expenses associated with operation of a plant or electrical system, and the revenue required to meet those expenses. The total revenue that may be received from the system is not considered in the analysis. The estimated costs for a base case (usually no rehabilitation or life extension) is compared to the operating costs of various alternatives, calculated over an operating life span of several years, and reduced to a Present Worth value, usually for the year in which the study started. If the PWRR of any alternative is estimated to be less than the base case, then an investment in the alternative plant equal to or less than this differential is a preferred economic choice. PWRR analysis is useful if future systems development and future gross revenue to the utility is difficult to estimate; it is also useful when comparing like technologies when differences in fuel supply and fuel cost are minimal

  19. Extension of operational limits on EAST

    International Nuclear Information System (INIS)

    Gao Xiang; Li Jiangang; Wan Baonian; Zhao Junyu; Hu Liqun; Liu Haiqing; Jie Yinxian; Xu Qiang; Wu Zhenwei; Yang Yu; Gong Xianzu; Shen Biao; Hu Jiansheng; Shi Yuejiang; Ling Bili; Wang Jun; Sajjad, S.; Zang Qing; Gao Wei; Zhang Tao; Yu Yaowei; Yang Yao; Han Xiaofeng; Shi Nan; Ming Tingfeng; Ti Ang; Zhang Wenyang; Xu Guosheng; Chen Junling; Luo Guangnan; Zhang Xiaodong; Mao Jianshan; Wan Yuanxi

    2007-01-01

    The first plasma has been achieved successfully in the Experimental Advanced Superconducting Tokamak (EAST). Boronization by the glow discharge (GDC) method was studied in experiments. The plasma performance was obviously improved by GDC boronization. Extension of the operational region and improvement in the plasma performance were obtained. Sawtooth discharges were observed by means of soft x-ray signals, electron cyclotron emission signals and line averaged electron density after boronization. Lower q a and more stable operation were also achieved following GDC boronization. The plasma current ramp-up rate was also improved as a result of decreased impurity content and low averaged loop voltage due to boronization

  20. Residual life of technical systems; diagnosis, prediction and life extension

    International Nuclear Information System (INIS)

    Reinertsen, Rune

    1996-01-01

    The paper presents and discusses research related to residual life of non-repairable and repairable technical systems. Diagnosis of systems and extension of residual life of technical systems are also presented and discussed. This paper concludes that research published describing determination and extension of residual life as well as methods for diagnosis of non-repairable and repairable technical systems, is somewhat limited. Many papers have a rather pragmatic approach. The authors only describe special cases from their own plant and do not provide any explanation of a more academical nature. The other papers are mainly describing very specific applications of statistical models, leaving the more general case out of consideration. One of the main results of this paper is to point out these facts, and thereby identify the need for future research in this area

  1. Computers make rig life extension an option

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-10-01

    The worldwide semisubmersible drilling rig fleet is approaching retirement. But replacement is not an attractive option even though dayrates are reaching record highs. In 1991, Schlumberger Sedco Forex managers decided that an alternative might exist if regulators and insurers could be convinced to extend rig life expectancy through restoration. Sedco Forex chose their No. 704 semisubmersible, an 18-year North Sea veteran, to test their process. The first step was to determine what required restoration, meaning fatigue life analysis of each weld on the huge vessel. If inspected, the task would be unacceptably time-consuming and of questionable accuracy. Instead a suite of computer programs modeled the stress seen by each weld, statistically estimated the sea states seen by the rig throughout its North Sea service and calibrated a beam-element model on which to run their computer simulations. The elastic stiffness of the structure and detailed stress analysis of each weld was performed with ANSYS, a commercially available finite-element analysis program. The use of computer codes to evaluate service life extension is described.

  2. The BWR owners' group planning guide for life extension

    International Nuclear Information System (INIS)

    Smith, S.K.; Lehnert, D.F.; Locke, R.K.

    1991-01-01

    Extending the operating life of a commercial nuclear power plant has been shown to be economically beneficial to both the utility and the electric customer. As such, many utilities are planning and implementing plant life extension (PLEX) programs. A document has been developed which provides guidance to utilities in formulating a PLEX program plant for one or more boiling water reactor (BWR) plants. The guide has been developed by the BWR Owners' Group Plant Life Extension Committee. The principal bases for this guide were the BWR Pilot and Lead Plant Programs. These programs were used as models to develop the 'base plan' described in this guide. By formulating their program plant utilizing the base plan, utilities will be able to maximize the use of existing evaluations and results. The utility planner will build upon the base plan by adding any tasks or features that are unique to their programs. (author)

  3. PSAD-a monitoring and aid to diagnosis system participating in saving on maintenance and operation costs and for plant life extension

    International Nuclear Information System (INIS)

    Brasseur, S.; Morel, J.; Joussellin, A.

    1997-01-01

    Monitoring nuclear plants components enable to save on operation and maintenance costs by reducing incidents gravity and casual plant stoppages thank to early detection and fast diagnosis. Improving the knowledge of the behaviour of the plant will also allow to optimize maintenance and to increase plant life. In order to improve monitoring and diagnosis capabilities in nuclear power plants. Electricite de France (EDF) is extending the existing data processing chains towards automatic aided interpretation and diagnosis. Therefore, EDF has designed an integrated monitoring and diagnosis assistance system: PSAD-Poste de Surveillance et d'Aide au Diagnostic, including several monitoring functions of the main components. It integrates on-line monitoring, off-line diagnosis and knowledge based systems. PSAD stations provide homogeneous aids to diagnosis which enable plant personnel to pinpoint the mechanical behaviour of plant equipment. The objective of PSAD is to provide them with high-efficiency and user-friendly tools which can considerabily free them from routine tasks. The first version of the prototype is working on a French Plant. This version includes the software host structure and two monitoring functions: the Reactor Coolant Pumps and the Turbo-generator Monitoring functions. Internal Structures Monitoring function and Loose Parts Detection are still under development and should be integrated into PSAD prototype in 1998

  4. Life extension of semi-submersible drilling unit

    Energy Technology Data Exchange (ETDEWEB)

    Hadley, I.; Sinclair, C.I.K. [TWI, Cambridge (United Kingdom). Structural Integrity Dept.; Magne, E. [Schlumberger Sedco Forex, Montrouge (France)

    1995-12-31

    This paper describes the life extension of a semi-submersible drilling rig built in the early 1970`s. A nominal design life of 20 years was estimated at the time of building; however, in the interim period, numerous improvements have been made in fatigue life estimation ad life improvement techniques, raising the possibility that a further 20 years of operation could be considered. The life extension strategy made use of a number of aspects of offshore technology which were not available at the time of construction of the rig. Finite element studies and results from offshore research programs were used to gauge the effect of fatigue life improvement techniques. The program demonstrated the feasibility of extending the operation of the rig for a further 20 years, with the interval between in-service inspection increased to every five years. It also provided a valuable database of fracture toughness data for the rig materials, which may be used in future work to address reliability issues.

  5. Nuclear power plant life extension in the United Kingdom

    International Nuclear Information System (INIS)

    Goodison, D.; Seddon, J.W.; Pape, E.M.

    1991-01-01

    The safety cases for the United Kingdom's older nuclear power plant have been reviewed by their utilities in order to justify continued operation of the reactors up to an age of at least 30 year. These 'long term safety reviews' have identified worthwhile plant modifications and aspects where further studies or plant inspections are required. As the plants approach the age of 30 years, 'life extension reviews' are now being undertaken, concentrating on management of ageing, to support operation to at least 40 years. (author)

  6. NPP Evaluation, backfitting and life extension. An engineering viewpoint

    International Nuclear Information System (INIS)

    Gonzalez Lopez, A.

    1993-01-01

    During the decade of the 80s, the Owners of the two oldest operating plants in Spain designed and built during the 60s - namely, Jose Cabrera NPP, a Westinghouse PWR, and Santa Maria de Garona NPP, a GE BWR- undertook the following important programs: 1. A far-reaching Systematic Evaluation Program (SEP) for the Jose Cabrera NPP consisting in the systematic safety review of the plant design, followed by the necessary hardware modifications, to upgrade it and make it comply with current safety criteria, and a Plant Upgrading Program for the Garona Nuclear Station focusing on specific topics affecting GE BWR Mark-I type plants of the same vintage. 2. A Remaining Life Management Program to ensure that the units, after extensive backfittings and high capital investment, would complete their design life, leaving open the option for plant life extension. These two units are today considered by the Spanish nuclear industry as the pilot plants for Plant Life Extension (PLEX) programs for PWRs and BWRs in our country The purpose of this paper is to summarize the principal lessons learned from EMPRESARIOS AGRUPADOS' participation as an architect-engineering organization in the engineering, design and implementation of these Programs. They are practical examples of positive experience which could be considered as a reference when carrying out similar programs for other plants. (author)

  7. NPP Evaluation, backfitting and life extension. An engineering viewpoint

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez Lopez, A [Empresarios Agrupados, A.I.E., Madrid (Spain)

    1993-12-15

    During the decade of the 80s, the Owners of the two oldest operating plants in Spain designed and built during the 60s - namely, Jose Cabrera NPP, a Westinghouse PWR, and Santa Maria de Garona NPP, a GE BWR- undertook the following important programs: 1. A far-reaching Systematic Evaluation Program (SEP) for the Jose Cabrera NPP consisting in the systematic safety review of the plant design, followed by the necessary hardware modifications, to upgrade it and make it comply with current safety criteria, and a Plant Upgrading Program for the Garona Nuclear Station focusing on specific topics affecting GE BWR Mark-I type plants of the same vintage. 2. A Remaining Life Management Program to ensure that the units, after extensive backfittings and high capital investment, would complete their design life, leaving open the option for plant life extension. These two units are today considered by the Spanish nuclear industry as the pilot plants for Plant Life Extension (PLEX) programs for PWRs and BWRs in our country The purpose of this paper is to summarize the principal lessons learned from EMPRESARIOS AGRUPADOS' participation as an architect-engineering organization in the engineering, design and implementation of these Programs. They are practical examples of positive experience which could be considered as a reference when carrying out similar programs for other plants. (author)

  8. Plant maintenance and plant life extension issue, 2008

    International Nuclear Information System (INIS)

    Agnihotri, Newal

    2008-01-01

    The focus of the March-April issue is on plant maintenance and plant life extension. Major articles include the following: Exciting time to be at the U.S. NRC, by Dale Klein, Nuclear Regulatory Commission; Extraordinary steps to ensure a minimal environmental impact, by George Vanderheyden, UniStar Nuclear Energy, LLC.; Focused on consistent reduction of outages, by Kevin Walsh, GE Hitachi Nuclear Energy; On the path towards operational excellence, by Ricardo Perez, Westinghouse Electric Company; Ability to be refuelled on-line, by Ian Trotman, CANDU Services, Atomic Energy of Canada, Ltd.; ASCA Application for maintenance of SG secondary side, by Patrick Wagner, Wolf Creek Nuclear Operating Corporation, Phillip Battaglia and David Selfridge, Westinghouse Electric Company; and, An integral part of the landscape and lives, by Tyler Lamberts, Entergy Nuclear Operations, Inc. The Industry Innovation article is titled Steam generator bowl drain repairs, by John Makar and Richard Gimple, Wolf Creek Nuclear Operating Corporation

  9. Life extension of containment structures of Indian PHWRs

    International Nuclear Information System (INIS)

    Roy, Raghupati; Garg, R.P.; Verma, U.S.P.

    2006-01-01

    required to be made at the design stage, for creating the database and continuous evaluation of the performance of the containment structure. The database generated thus, will be utilised for extension of operating life with appropriate measures. (author)

  10. Technology and testing for the extension of plant life

    International Nuclear Information System (INIS)

    Blumer, U.R.; Edelmann, X.

    1988-01-01

    This paper describes selected portions of a recommended program for the application of equipment-manufacturing-related technology and testing for the extension of life for operating nuclear power plants. It is appropriate to mention that the Swiss nuclear plants, their staffs, and the supporting Swiss nuclear industry are rightfully proud of their record of performance. Plant staffs have been intimately involved in system and equipment design and engineering from the very beginnings of their plants. Maintenance of the plant systems and equipment is referred to as engineering rather than maintenance, because it is viewed as a technical effort and an extension of the original plant and equipment design and construction effort. Care, competence, cleanliness, and attention to detail have been bywords for the Swiss plants. Success has been demonstrated through enviable availability performance. With operation and availability capability already demonstrated, the Swiss are now turning their attention to the extension of plant life. This summary describes some aspects of this work, which is fundamentally based on the application of technology and testing skills developed for equipment manufacture and the original installation of this equipment in the plants, but has been enhanced by research and development (R and D) and an ongoing effort to serve utilities in their maintenance activities

  11. Nuclear unit life extension: technico-economic considerations

    International Nuclear Information System (INIS)

    Bertron, L.

    1987-01-01

    The outstanding place of PWR power plants among the overall power generating facilities indicates the need for particular attention to be paid to assessing their expected useful life. The more so as they are not, in the medium term, exposed to the risk of becoming financially absolute which might result from more efficient generating tools entering the market. Yet, in no case should plant life extension affect safety in operation. This makes it necessary to ascertain and produce evidence that the various items of equipment remain equal to their function in terms of safety. Components ageing problems should be steadily monitored and ageing indicators adopted, allowing decisions of refurbishing or replacement to be made to avert plant shutdown. The alternative between repair works or shutdown will possibly arise in the case of heavy equipment likely to require protracted repairs and intricate works in radioactive environment. A technico-economic study, making allowance for anticipated savings in life extension through replacement operations, should help make the most appropriate decision [fr

  12. EPRI/DOE nuclear plant life extension overview

    International Nuclear Information System (INIS)

    Carey, J.J.; Lapides, M.E.; Harrison, D.; Ducharme, A.

    1987-01-01

    Recognizing the major investment in current U.S. nuclear capacity and the excellent prospects that these units have a useful life substantially in excess of their 40 year license term, EPRI and DOE have jointly undertaken a comprehensive, multiyear, nuclear plant life extension program. The program, which has its antecedents in EPRI studies of 1978-9, aims to support U.S. utilities, first in verifying the requirements of extended operation and then in implementing a plan for achieving extended service and license renewal. The effort, begun in 1985, has already yielded numerous benefits and is expected to further aid in improving near-term performance of nuclear units. A utility LWR Plant Life Extension Committee has been established to provide overview and guidance to the DOE/EPRI research and development activities and also to develop and integrate utility responses to licensing and codes and standards issues. Pilot study projects, performed by Virginia Power and Northern States Power, were the initial EPRI/DOE focus. This base has gradually expanded to incorporate other utilities and generating units, as well as a broad base of technology support. The latter includes: a) economic and financial analysis methods applicable at the unit, region and national level, b) long-term materials deterioration analysis and sampling, c) component life prediction methods and d) refurbishment and repair evaluations. This paper presents the history and status of the overall EPRI/DOE program

  13. Safety aspects in life extension of NPPs. Working material

    International Nuclear Information System (INIS)

    2002-01-01

    Due to current social and economical framework, in last years many Member States (MS) started a process of Plant Life Extension (PLEX) for their older nuclear facilities. The process followed many different approaches, being intrinsically dependent on the national regulatory framework and technical tradition. This process has many nuclear safety implications, other than strategic and political ones, and therefore a need for tailoring the available safety assessment tools to such applications has become urgent in recent years. Typical safety assessment processes such as the Periodic Safety Review has been used already and can be used in the future as a framework for a PLEX. Also the review of regular maintenance and ageing management programs and the continuous upgrading of the Safety Analysis Report are tools widely used in a life extension context in many MS. However, recently some MS highlighted the need to identify in a clear way the technical aspects more directly affecting the decision for a long-term operation of a nuclear facility. Many Technical Cooperation projects have been requested for the year 2003-2004 on this subject and a generic task in Nuclear Safety proved necessary as a background activity. Therefore, on May 6-10, 2002, a Consultant Meeting dealing with Safety Aspects of life extension for NPPs was convened at the Nuclear Safety Dept. of the IAEA. It was attended by representatives of Regulatory Bodies and Utilities, both from countries with experience of life extension of NPPs and countries where the process is at the beginning. The main application problems were identified and discussed and a first attempt was carried out to define the key elements of the life extension process, isolating peculiar technical items, LTO related, from generic safety related tasks. The result was a preliminary technical document with a collection of basic experience and information for the implementation of a PLEX program. Therefore the draft document was thought

  14. U.S. National and regional impacts nuclear plant life extension

    International Nuclear Information System (INIS)

    Makovick, L.; Fletcher, T.; Harrison, D.L.

    1987-01-01

    The purpose of this study was to evaluate the economic impacts of nuclear plant life extension on a national and regional level. Nuclear generating capacity is expected to reach 104 Gigawatts (119 units) in the 1994-1995 period. Nuclear units of the 1970 to 1980 vintage are expected to account for 96% of nuclear capacity. As operating licenses expire, a precipitous decline in nuclear capacity results, with an average of 5 gigawatts of capacity lost each year from 2010 to 2030. Without life extension, 95% of all nuclear capacity is retired between the years 2010 and 2030. Even with historically slow growth in electric demand and extensive fossil plant life extension, the need for new generating capacity in the 2010-2030 time period is eight times greater than installed nuclear capacity. Nuclear plant life extension costs and benefits were quantified under numerous scenarios using the DRI Electricity Market Model. Under a wide range of economic assumptions and investment requirements, nuclear plant life extension resulted in a net benefit to electricity consumers. The major source of net benefits from nuclear plant life extension results from the displacement of fossil-fired generating sources. In the most likely case, nuclear plant life extension provides a dollar 200 billion net savings through the year 2030. Regions with a large nuclear capacity share, newer nuclear units and relatively higher costs of alternative fuels benefit the most from life extension. This paper also discusses the importance of regulatory policies on nuclear plant life extension

  15. EPRI research on component aging and nuclear plant life extension

    International Nuclear Information System (INIS)

    Sliter, G.E.; Carey, J.J.

    1985-01-01

    This paper first describes several research efforts sponsored by the Electric Power Research Institute (EPRI) that examine the aging degradation of organic materials and the nuclear plant equipment in which they appear. This research includes a compendium of material properties characterizing the effects of thermal and radiation aging, shake table testing to evaluate the effects of aging on the seismic performance of electrical components, and a review of condition monitoring techniques applicable to electrical equipment. Also described is a long-term investigation of natural versus artificial aging using reactor buildings as test beds. The paper then describes how the equipment aging research fits into a broad-scoped EPRI program on nuclear plant life extension. The objective of this program is to provide required information, technology, and guidelines to enable utilities to significantly extend operating life beyond the current 40-year licensed term

  16. US national and regional impacts of nuclear plant life extension

    International Nuclear Information System (INIS)

    Makovich, L.; Forest, L.; Fletcher, T.

    1988-01-01

    The US will need new sources of electricity in the early 21st century due to retirement of much of the nation's generating capacity. Almost all of the US nuclear capacity would be included in those retirements if, as originally expected, the nuclear units were shut down and decommissioned as the operating licenses expired between 2005 and 2025. However, given the large demands for new capacity during that period, nuclear plant life extension (NUPLEX) -- the extension of operating life beyond the original license period -- needs to be considered as an electricity source. This study assesses the benefits and costs of NUPLEX relative to the anticipated competing sources of electricity supply in the early 21st century. We find that NUPLEX yields large net benefits under a wide range of plausible economic conditions. This study associates net benefits with electricity cost savings, thereby abstracting from speculative reliability considerations. To illustrate the effects of uncertainty, the study assesses NUPLEX net benefits under varying assumptions on NUPLEX investment costs and other future economic conditions

  17. Life extension of low and medium voltage equipment

    International Nuclear Information System (INIS)

    Bharteey, B.M.; Hart, T.J.

    1990-01-01

    Nuclear plant life extension is becoming a very important issue with the passing of each day. Within 3 to 10 years after the turn of the century, licenses of a number of nuclear power plants in the United States will expire. For the near future, new construction of nuclear power plants in the United States is expected to be inhibited, if the current economic and regulatory environment continues to persist. This situation, coupled with aging of utility equipment and the high cost of financing new construction is resulting in a growing emphasis on preserving and extending the capability of existing power plants. Until now, the utilities have placed more emphasis on high cost items, but experience shows that extending life of low cost of device/components in items like Motor Control Center Centers and switchgear pays big dividends. According to the current practice, devices of these items are replaced at the end of their assigned qualified life or attended to when there is a problem resulting in an unplanned outage. In this paper based on extensive experience in the field of motor control centers and medium switchgear, the authors proposed a cookbook methodology to determine the extent or absence of degradation and establish trends of the pertinent operational properties of devices of this type of equipment. The test results also provide satisfactory evidence of class 1E nuclear safety-related function

  18. A business model framework for product life extension

    NARCIS (Netherlands)

    Den Hollander, M.C.; Bakker, C.A.

    2012-01-01

    Product life extension is an increase in the utilization period of products. Design research on product life extension strategies has so far mainly focused on technical aspects of products, like ‘prevention engineering’ or ‘design for repair, maintenance and upgradability’, and on individual

  19. [Quality of life after extensive pelvic surgery].

    Science.gov (United States)

    Levý, M; Lipská, L; Visokai, V; Šimša, J

    Multiorgan resections in the small pelvis are standard procedures in oncosurgery and some indications have no alternative. In advanced pelvic cancer, pelvic exenteration with en bloc resection of the involved organs and structures, including portions of the bony pelvis, is indicated. The 5-year survival rate is fairly good, around 50%, but little is known about the long-term quality of life. The aim was to describe the quality of life of long-term total pelvic exenteration survivors. In total, 63 pelvic exenterations were performed between 2000 to 2015 at the Department of Surgery, Thomayer Hospital, First Faculty of Medicine, Charles University in Prague, mostly for primary or relapsed rectal cancer. In this retrospective cohort study, the quality of life was assessed using the EORTC QLQ-C30 (version 3.0) and the EORTC QLQ-CR29 questionnaires. The completed questionnaires were scored according to EORTC instructions. At the time of this survey, 24 patients after TPE were surviving longer than one year after the surgery. The five-year survival of all patients was 49%, median survival 4.6 years, and median follow-up 15 months. Most of our patients reported a good level of their physical, emotional, cognitive and social functions. Some patients reported a worse body image, and of course a worsening in their sexual life. Regarding symptom-oriented questions, some patients evaluated the necessity of more frequent care of the stomia as slightly problematic; most patients reported impotence (men) or painful sexual intercourse (women). Long-term quality of life in survivors of pelvic exenteration for rectal cancer is comparable with reported results following primary rectal cancer resection with the exception of the sexual function. The quality of life gradually improves in the course of weeks to months from the surgery. pelvic exenteration quality of life.

  20. International requirements for life extension of nuclear power plants

    International Nuclear Information System (INIS)

    Wernicke, Robert

    2009-01-01

    Lifetime extension or long-term operation of nuclear facilities are topics of great international significance against the backdrop of a fleet of nuclear power plants of which many have reached 2/3 of their planned life. The article deals with the conditions for, and the specific requirements of, seeking long-term operation of nuclear power plants as established internationally and on the basis of IAEA collections. Technically, long-term operation is possible for many of the nuclear power plants in the world because, normally, they were built on the basis of conservative rules and regulations and, as a consequence, incorporate significant additional safety. Application of requirements to specific plants implies assessments of technical safety which show that conservative design philosophies created reserves and, as a consequence, there is an adequate level of safety also in long-term plant operation. For this purpose, the technical specifications must be revised, necessary additions made, and (international) operating experience taken into account and management of aging established. Two examples are presented to show how the approach to long-term plant operation is put into practice on a national level. (orig.)

  1. Remaining life assessment and plant life extension in high temperature components of power and petrochemical plant

    International Nuclear Information System (INIS)

    Fleming, A.

    2003-01-01

    This paper explains the reasons why plant life can so easily be extended beyond the original design life. It details the means by which plant life extension is normally achieved, a structured plan for achieving such plant life extension at reasonable cost and some of the key techniques used in assessing the remaining life and discusses the simple repair options available. (author)

  2. Life prediction study of reactor pressure vessel as essential technical foundation for plant life extension

    International Nuclear Information System (INIS)

    Nakajima, H.; Nakajima, N.; Kondo, T.

    1987-01-01

    The life of a LWR plant is determined essentially by the limit of reliable performance of the components which are difficult to replace without high economic and/or safety risks. Typical of such a component is the reactor pressure vessel (RPV). The engineering life of a RPV of a given quality of steel is considered to be a complex function of factors such as the resistance to fracture, which has deteriorated due to neutron irradiation and thermal aging, and generation of surface flaws by environmental effects such as corrosion and their growth under operational load that varies during steady state operation and transients. In an attempt to evaluate the engineering life of a RPV of a LWR, a preliminary survey was made by applying a set of knowledge accumulated primarily in the field of subcritical crack growth behavior of RPV steels in reactor water environments. The major conclusions drawn are: (1) the life of a RPV is dependent on the quality of steel used, particularly with respect to any minor impurities it contains. (2) The issue of plant life extension in RPV aspect is found to be optimistic for cases where the steels used satisfy a reasonable level of quality control. (3) The importance of providing sound scientific foundation is stressed for the implementation of a practicable life extension scheme: this can be established through intensified studies of flaw growth and fracture behaviours in well defined testings under reasonably simulated service conditions

  3. Life extension program of KORI Unit 1 NPP in Korea

    International Nuclear Information System (INIS)

    Hong, Sun-Yull

    1998-01-01

    The two phases of Life extension program for KORI Unit 1 NPP are presented. Phase I is completed. It was concluded that life extension is a feasible option in technical and economic aspects. Detailed analysis of RPV is underway, plan for Phase II is finished. It deals with screening and sorting of all relevant SSCs, detailed life evaluation of SSCs, ageing management program and documentation for license renewal application

  4. Service life optimization and extension of structures

    International Nuclear Information System (INIS)

    Hornet, P.; Venturini, V.; Persoz, M.; Debost-Eymard, I.; Meister, E.

    1998-01-01

    In order to justify its power plants safety which conditions their service life, EDF uses a deterministic approach until now. A probabilistic approach also exists which has a decisive advantage because it quantifies risk and makes it possible to optimize maintenance volume. The application of this approach is illustrated on the case of a reactor vessel; a coupling between the Code Aster tool and a probabilistic analysis software is necessary. (authors)

  5. Solid Propulsion Systems, Subsystems, and Components Service Life Extension

    Science.gov (United States)

    Hundley, Nedra H.; Jones, Connor

    2011-01-01

    The service life extension of solid propulsion systems, subsystems, and components will be discussed based on the service life extension of the Space Transportation System Reusable Solid Rocket Motor (RSRM) and Booster Separation Motors (BSM). The RSRM is certified for an age life of five years. In the aftermath of the Columbia accident there were a number of motors that were approaching the end of their five year service life certification. The RSRM Project initiated an assessment to determine if the service life of these motors could be extended. With the advent of the Constellation Program, a flight test was proposed that would utilize one of the RSRMs which had been returned from the launch site due to the expiration of its five year service life certification and twelve surplus Chemical Systems Division BSMs which had exceeded their eight year service life. The RSRM age life tracking philosophy which establishes when the clock starts for age life tracking will be described. The role of the following activities in service life extension will be discussed: subscale testing, accelerated aging, dissecting full scale aged hardware, static testing full scale aged motors, data mining industry data, and using the fleet leader approach. The service life certification and extension of the BSMs will also be presented.

  6. Pointwise extensions of GSOS-defined operations

    NARCIS (Netherlands)

    Hansen, H.H.; Klin, B.

    2011-01-01

    Final coalgebras capture system behaviours such as streams, infinite trees and processes. Algebraic operations on a final coalgebra can be defined by distributive laws (of a syntax functor S over a behaviour functor F). Such distributive laws correspond to abstract specification formats. One such

  7. Pointwise Extensions of GSOS-Defined Operations

    NARCIS (Netherlands)

    H.H. Hansen (Helle); B. Klin

    2011-01-01

    textabstractFinal coalgebras capture system behaviours such as streams, infinite trees and processes. Algebraic operations on a final coalgebra can be defined by distributive laws (of a syntax functor $\\FSig$ over a behaviour functor $F$). Such distributive laws correspond to abstract specification

  8. m-Accretive extensions of a sectorial operator

    Energy Technology Data Exchange (ETDEWEB)

    Arlinskii, Yu M; Popov, A B [East-Ukrainian National University, Lugansk (Ukraine)

    2013-08-31

    A description of all the maximal accretive extensions and their resolvents is given for a densely defined closed sectorial operator in terms of abstract boundary conditions. These results are applied to parametrize all the m-accretive extensions of a symmetric operator in a planar model of one-centre point interaction. Bibliography: 40 titles.

  9. Discussion on life extension of nuclear power plant around the world

    International Nuclear Information System (INIS)

    Chen Ming; Zhang Yuansi

    2010-01-01

    The very Paper introduces the concept, basic working flow and fundamental elements of the life extension of nuclear power plant (NPP) around the world; and it generally collects and summarizes the status datum of life extension of NPPs. Afterwards, the Paper analyses the present status of life extension of NPP in various countries with strong nuclear power industry, i.e. the United States, France, Germany, Russia Federation, Japan, South Korea and Canada. At the end, the Paper make a conclusion that whether an operating NPP will adopt life extension at the end of its design life, this issue depends on the factor of economy, safety and technical feasibility of life extension on the NPP. According to latest datum collected in 2009, the nuclear power units around the world, which have exceeded the design lives or are close to design life ends, most of them (about 64%) have selected to extend their service lives; based on this statistical data, we concludes that when an operating nuclear unit is facing with the issue of to extend life or to retire itself, it will be apt to make life extension. (authors)

  10. Life extension for German nuclear power plants

    International Nuclear Information System (INIS)

    Heller, W.

    2005-01-01

    The Federation of German Industries (BDI) commissioned a study of the ''Economic Effects of Alternative Lifetimes of Nuclear Power Plants in Germany.'' The expert organizations invited as authors were the Power Economy Institute of the University of Cologne (EWI) and Energy Environment Forecast Analysis GmbH (EEFA), Berlin. The reasons for commissioning the Study include the changed framework conditions (deregulation, CO 2 emission certificate trading, worldwide competition for resources), which have altered the energy supply situation in Europe. The findings of the Study were presented to the public by the BDI on October 26, 2005. The study deals with two scenarios of extended lifetimes for German nuclear power plants of 40 and 60 years as against the existing regulations with plant lifetimes limited to approx. 32 years. The longer service lives of plants are reflected in reduced electricity generation costs and thus may have a positive influence on electricity prices. Moreover, there would be additional growth of production together with additional jobs, all of which would add up to nearly 42,000 persons for all sectors of the economy as compared to the basic scenario. Also, CO 2 emissions could be curbed by up to 50 million tons of carbon dioxide. The Study offers ample and valid reasons in favor of extending the lifetimes of nuclear power plants. In the interest of general welfare, politics would be well advised to relax the restrictions on plant life in the course of this legislative term. (orig.)

  11. Decision support for life extension of technical systems through virtual age modelling

    International Nuclear Information System (INIS)

    Pérez Ramírez, Pedro A.; Utne, Ingrid Bouwer

    2013-01-01

    This article presents a virtual age model for decision support regarding life extension of ageing repairable systems. The aim of the model is to evaluate different life extension decision alternatives and their impact on the future performance of the system. The model can be applied to systems operated continuously (e.g., process systems) and systems operated on demand (e.g., safety systems). Deterioration and efficiency of imperfect maintenance is assessed when there is limited or no degradation data, and only failure and maintenance data is available. Systems that are in operation can be studied, meaning that the systems may be degraded. The current degradation is represented by a “current virtual age”, which is calculated from recorded maintenance data. The model parameters are estimated with the maximum likelihood method. A case study illustrates the application of the model for life extension of two fire water pumps in an oil and gas facility. The performance of the pump system is assessed with respect to number of failures, safety unavailability and costs during the life extension period. -- Highlights: ► Life extension assessment of technical systems using virtual age model is proposed. ► A virtual age model is generalised for systems in stand-by and continuous operation. ► The concept of current virtual age describes technical condition of the system. ► Different decision alternatives for life extension can be easily analysed. ► The decision process is improved even when only scarce failure data is available

  12. Shelf-life extension of fresh chicken through radurisation

    International Nuclear Information System (INIS)

    Niemand, J.G.; Van der Linde, H.J.

    1982-01-01

    The article discusses the shelf-life extension of fresh chicken through radurization. In order to assess the potential of this process on the South African market, a detailed investigation was carried out to determine the shelf-life extension under local conditions. The following aspects were investigated; 1) reduction of bacterial numbers at different radurisation doses; 2) influence of storage temperature on shelf-life and 3) the elimination of Salmonella. Organoleptic testing was carried out on poultry radurised to doses of 3, 5, 7,5 and 10 kGy as well as on non-radurised controls

  13. The PREEV project of the Latin American Forum.Regulatory practices on aging and life extension

    International Nuclear Information System (INIS)

    Figueras, J. M.

    2011-01-01

    The American Forum Plenary approved in 2008 the PREEV project, Regulatory Practices in Aging and Life Extension, whose main objective is to improve the regulatory action with regard to the management programs of life and long-term operation of nuclear power plants in the countries of the region Latin American.

  14. Low-level radioactive waste associated with plant life extension

    International Nuclear Information System (INIS)

    Sciacca, F.; Zigler, G.; Walsh, R.

    1992-01-01

    Many utilities operating nuclear power plants are expected to seek to extend the useful life of their plants through license renewal. These US Nuclear Regulatory Commission (NRC) licensees are expected to implement enhanced inspection, surveillance, testing, and monitoring (ISTM) as needed to detect and mitigate age-related degradation of important structures, systems, and components (SSCs). In addition, utilities may undertake various refurbishment and upgrade activities at these plants to better assure economic and reliable power generation. These activities performed for safety and/or economic reasons can result in radioactive waste generation, which is incremental to that generated in the original licensing term. Work was performed for the NRC to help define and characterize potential environmental impacts associated with nuclear plant license renewal and plant life extension. As part of this work, projections were made of the types and quantities of low-level radioactive waste (LLRW) likely to be generated by licensee programs. These projections were needed to estimate environmental impacts related to the disposal of such wastes

  15. Life extension of nuclear power plants. World situation and the USA case

    International Nuclear Information System (INIS)

    Leon, Pablo T.; Cuesta, Loreto; Serra, Eduardo; Yaguee, Luis

    2010-01-01

    Life extension of Nuclear Power Plants above 40 years of operation is an important issue in many countries. The Kyoto limits for CO 2 emissions, the security of supply, the costs and predictability of renewable energy, etc., are putting nuclear energy in the agenda of many countries all around the world. The delay, due to the economic crisis, of the new nuclear projects in many countries, push governments to continue operation of nuclear plants above the 40 years design life. This is the case in the USA, where 59 units have obtained the extension of operation license from 40 to 60 years, and currently have 19 units are in the reviewing process. The life extension of these plants permits savings in CO 2 emissions and in the consumption of additional amounts of fossil fuels. In this paper, the position of the different nuclear countries about the Extension of Life will be reviewed, with a special emphasis on the situation in the USA. In this last case, the NRC approach for operation licenses above 40 years will be explained, and actions taken by nuclear companies in the country will be reviewed. In this country, the debate about life extension over 40 years has been surpassed, and the new technical discussion focuses on the operation of nuclear power plants above 60 years. (authors)

  16. Life extension of nuclear power plants. World situation and the USA case

    Energy Technology Data Exchange (ETDEWEB)

    Leon, Pablo T.; Cuesta, Loreto; Serra, Eduardo; Yaguee, Luis [Endesa. C/ Ribera del Loira, No.60, 28042 Madrid (Spain)

    2010-07-01

    Life extension of Nuclear Power Plants above 40 years of operation is an important issue in many countries. The Kyoto limits for CO{sub 2} emissions, the security of supply, the costs and predictability of renewable energy, etc., are putting nuclear energy in the agenda of many countries all around the world. The delay, due to the economic crisis, of the new nuclear projects in many countries, push governments to continue operation of nuclear plants above the 40 years design life. This is the case in the USA, where 59 units have obtained the extension of operation license from 40 to 60 years, and currently have 19 units are in the reviewing process. The life extension of these plants permits savings in CO{sub 2} emissions and in the consumption of additional amounts of fossil fuels. In this paper, the position of the different nuclear countries about the Extension of Life will be reviewed, with a special emphasis on the situation in the USA. In this last case, the NRC approach for operation licenses above 40 years will be explained, and actions taken by nuclear companies in the country will be reviewed. In this country, the debate about life extension over 40 years has been surpassed, and the new technical discussion focuses on the operation of nuclear power plants above 60 years. (authors)

  17. Analysis of integrated plant upgrading/life extension programs

    International Nuclear Information System (INIS)

    McCutchan, D.A.; Massie, H.W. Jr.; McFetridge, R.H.

    1988-01-01

    A present-worth generating cost model has been developed and used to evaluate the economic value of integrated plant upgrading life extension project in nuclear power plants. This paper shows that integrated plant upgrading programs can be developed in which a mix of near-term availability, power rating, and heat rate improvements can be obtained in combination with life extension. All significant benefits and costs are evaluated from the viewpoint of the utility, as measured in discounted revenue requirement differentials between alternative plans which are equivalent in system generating capacity. The near-term upgrading benefits are shown to enhance the benefit picture substantially. In some cases the net benefit is positive, even if the actual life extension proves to be less than expected

  18. Life extension of boilers using weld overlay protection

    Energy Technology Data Exchange (ETDEWEB)

    Lai, G.; Hulsizer, P. [Welding Services Inc., Norcross, GA (United States); Brooks, R. [Welding Services Inc., Welding Services Europe, Spijkenisse (Netherlands)

    1998-12-31

    The presentation describes the status of modern weld overlay technology for refurbishment, upgrading and life extension of boilers. The approaches to life extension of boilers include field overlay application, shop-fabricated panels for replacement of the worn, corroded waterwall and shop-fabricated overlay tubing for replacement of individual tubes in superheaters, generating banks and other areas. The characteristics of weld overlay products are briefly described. Also discussed are successful applications of various corrosion-resistant overlays for life extension of boiler tubes in waste-to-energy boilers, coal-fired boilers and chemical recovery boilers. Types of corrosion and selection of weld overlay alloys in these systems are also discussed. (orig.) 14 refs.

  19. Life extension of boilers using weld overlay protection

    Energy Technology Data Exchange (ETDEWEB)

    Lai, G; Hulsizer, P [Welding Services Inc., Norcross, GA (United States); Brooks, R [Welding Services Inc., Welding Services Europe, Spijkenisse (Netherlands)

    1999-12-31

    The presentation describes the status of modern weld overlay technology for refurbishment, upgrading and life extension of boilers. The approaches to life extension of boilers include field overlay application, shop-fabricated panels for replacement of the worn, corroded waterwall and shop-fabricated overlay tubing for replacement of individual tubes in superheaters, generating banks and other areas. The characteristics of weld overlay products are briefly described. Also discussed are successful applications of various corrosion-resistant overlays for life extension of boiler tubes in waste-to-energy boilers, coal-fired boilers and chemical recovery boilers. Types of corrosion and selection of weld overlay alloys in these systems are also discussed. (orig.) 14 refs.

  20. Life extension of nuclear power plants: world situation and the Usa case

    International Nuclear Information System (INIS)

    Leon, P.T.; Cuesta, L.; Serra, E.; Yague, L.

    2010-01-01

    Life extension of nuclear power plants above 40 years of operation is an important issue in many countries. The Kyoto limits for CO 2 emissions, the security of supply, the costs of renewable energies and the economic crisis have pushed governments to continue operation of nuclear plants over the 40 years design life. In the Usa 59 units have obtained the extension of operation license from 40 to 60 years, and currently 19 units are in the reviewing process. The situation in the rest of the world is different. A list of countries, where nuclear units with a service life over 30 years, are still operating has been drawn up. A few countries like Belgium, Germany, Spain and Sweden are opposed to life extension. Some countries like Finland, the Netherlands, Switzerland, India, Japan and Usa, have adopted a life extension policy for their nuclear fleet. Other countries like France, Russia, United-Kingdom, Pakistan, South-Korea and Argentina have not yet taken any final decision. United-Kingdom and France have a case by case policy. In some countries like Japan, Indian or Pakistan, the legislation makes no reference to a maximum operating time but the reactors are allowed to continue operating as long as they comply with established safety conditions. (A.C.)

  1. EXTENSION EDUCATION SYMPOSIUM: Getting the most out of your extension appointment and still having a life.

    Science.gov (United States)

    Powers, W; Cockett, N; Lardy, G

    2017-04-01

    Managing the demands of an academic appointment in extension can be a challenging task. Demands from constituent groups, expectations of supervisors, and rigors of promotion and tenure processes can create pressures that young faculty did not expect. Throw in spousal and family duties and you have created a situation that many will find hard to navigate. However, there are ways to cope and, even better news, there are ways to excel in meeting the demands of an academic appointment and enjoying life. Because many new extension faculty members do not have prior experience in extension, best practices in documenting programs and extension scholarship over the pretenure period are provided in this paper. Appointments that include both research and extension are quite common at many land grant universities. The advantages of joint appointments are numerous and include the fact that more and more grant agencies are seeking integrated research, teaching, and/or extension projects. However, the time demands of joint appointments can be challenging. Joint appointments can be designed to help faculty members conduct important translational research and have it be applied in a production setting. By seeking commonalities in research and extension efforts, joint appointments can be very synergistic. Development of highly successful programs requires planning on the front end with an emphasis on an in-depth needs assessment to determine stakeholder needs for both research and extension. Impact assessment should be part of this planning effort. Performing as a successful extension faculty member while maintaining relationships outside of work is challenging and requires deliberate effort on the part of employees and supervisors to realize there is more to life than work. Some authors have referred to this as work-life balance, but it may be more helpful to think of it as work-life effectiveness. To do this, one needs to 1) define what success looks like, 2) set boundaries and

  2. Shelf life extension of ground beef by radurization

    International Nuclear Information System (INIS)

    Holzapfel, W.H.; Niemand, J.G.

    1982-01-01

    Radurization was investigated as a technique in the shelf life extension of ground beef. Although radurization does not necessarily kill off all meat spoilage bacteria, this process may be used for extending the bacteriological keeping quality of fresh meat. The materials and methods used in the investigation are also discussed

  3. International database on ageing management and life extension

    International Nuclear Information System (INIS)

    Ianko, L.; Lyssakov, V.; McLachlan, D.; Russell, J.; Mukhametshin, V.

    1995-01-01

    International database on ageing management and life extension for reactor pressure vessel materials (RPVM) is described with the emphasis on the following issues: requirements of the system; design concepts for RPVM database system; data collection, processing and storage; information retrieval and dissemination; RPVM information assessment and evaluation. 1 fig

  4. Extension of emergency operating procedures for severe accident management

    International Nuclear Information System (INIS)

    Chiang, S.C.

    1992-01-01

    To enhance the capability of reactor operators to cope with the hypothetical severe accident its the key issue for utilities. Taiwan Power Company has started the enhancement programs on extension of emergency operating procedures (EOPs). It includes the review of existing LOPs based on the conclusions and recommendations of probabilistic risk assessment studies to confirm the operator actions. Then the plant specific analysis for accident management strategy will be performed and the existing EOPs will be updated accordingly

  5. Non-arrhenius behavior in product life extension

    International Nuclear Information System (INIS)

    Dulka, C.P.; Scamman, J.F.

    1988-01-01

    The purpose of the work reported in this paper was to investigate contact sticking, which was determined to be caused by a materials shrinkage phenomenon. The phenomenon was noted after a brief accelerated thermal aging format, which was followed during the course of a General Electric materials analysis technique (GEMAT) product life extension program. The original qualification work did not address this phenomenon. This shrinkage phenomenon occurs in some materials and, depending upon the design of the product, could be a significant factor in a product life extension program. Further tests are planned in which this phenomenon will be investigated as a function of temperature and time duration in a GEMAT program. The extent of this phenomenon's effect on product life depends on type of material, product design, and product tolerances. Furthermore, this phenomenon may or may not exhibit an Arrhenius-type behavior, and more investigation is required in this area. In any product life extension program, the existence of this phenomenon and the degree to which it affects the product's life should be investigated. This phenomenon can be a significant factor

  6. Oconee: Is life extension in the cards for plants of this vintage

    International Nuclear Information System (INIS)

    Killian, D.E.; Moore, K.E.; Tally, C.W.

    1986-01-01

    Recent nuclear-industry interest in plant life extension is prompted by the realization that the economics of plant life extension are clearly favorable. Studies sponsored by the Electric Power Research Institute (EPRI) show that replacing even the most costly nuclear components can easily be justified, if the life of the plant can be extended just a few years. This may not be apparent for the early, small plants, but its applicability to the larger plants that started to appear in the early 70s-such as the three 860-MW Oconee units-is hard to dispute. The large capital investment in the typical nuclear station and extensive decommissioning costs add impetus to life-extension efforts. The same is true for fossil plants, and they are being successfully refurbished to extend their operating lives. Refurbishment of a fossil plant is comparatively simple, however, especially with regard to licensing and environmental qualifications where recognized standards are already in place. In the case of nuclear plants, much work must be done before all the pertinent issues and alternatives are identified. Potentially conflicting objectives may require resolution before a utility makes long-term decisions about life extension. For example, a utility may decide to designate a plant to accommodate grid load swings. In the near term, this may be a logical choice. However, the long-term negative aspects of component thermal cycling should be considered, especially if plant life extension is deemed important

  7. Establishment of safety verification method for life extension based on periodic safety review

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Soong Pyung; Yeom, Yu Son; Yoon, In Sik; Lee, Jeo Young [Chosun Univ., Gwangju (Korea, Republic of)

    2004-02-15

    Safe management of operating lifetimes of Nuclear Power Plants is a subject of prime interests. As the design life of the Nuclear Power Plant will be ended in 2008, an appropriate procedure for the design life re-assessment or lifetime extension is necessary in Korea. Therefore, the objective of this work is to develop procedural requirements which can be applied to the regulation of lifetime management or life extension of Nuclear Power Plants in Korea. Review on the linkage of the PSR with the extension of the operating lifetime of Nuclear Power Plants was performed to enhance the utilization of PSR results and analysis of the insufficiencies in the license rule in Korea.

  8. Use of dynamic Bayesian networks for life extension assessment of ageing systems

    International Nuclear Information System (INIS)

    Ramírez, Pedro A. Pérez; Utne, Ingrid Bouwer

    2015-01-01

    Extending the operating lifetime of ageing technical systems is of great interest for industrial applications. Life extension requires identifying and selecting decision alternatives which allow for a safe and economic operation of the system beyond its design lifetime. This article proposes a dynamic Bayesian network for assessing the life extension of ageing repairable systems. The main objective of the model is to provide decision support based on the system performance during a finite time horizon, which is defined by the life extension period. The model has three main applications: (i) assessing and selecting optimal decision alternatives for the life extension at present time, based on historical data; (ii) identifying and minimizing the factors that have a negative impact on the system performance; and (iii) reassessing and optimizing the decision alternatives during operation throughout the life extension period, based on updating the model with new operational data gathered. A case study illustrates the application of the model for life extension of a real firewater pump system in an oil and gas facility. The case study analyzes three decision alternatives, where preventive maintenance and functional test policies are optimized, and the uncertainty involved in each alternative is computed. - Highlights: • A dynamic Bayesian network is used for predicting the system performance. • The performance is measured with relevant variables: cost; unavailability; safety. • The model can be used when scarce data is available, no degradation data is needed. • The uncertainty associated to each alternative is computed in the model. • A detailed case study of a real safety system shows the applicability of the model

  9. Operation of ULCS - real life

    Directory of Open Access Journals (Sweden)

    Jasna Prpić-Oršić

    2014-12-01

    Full Text Available In this paper the real life operation of ULCS (Ultra Large Container Ships is presented from the point of view of shipmasters. The paper provides interpretation of results of questionnaire filled by masters of large container ships during Tools for Ultra Large Container Ships (TULC EUI FP7 project. This is done in a way that results of questionnaire are further reviewed and commented by experienced master of ULCS. Following phenomena are subject of questionnaire and further discussed in the paper: parametric rolling, slamming, whipping, springing, green water and rogue waves. Special attention is given to the definition of rough sea states as well as to measures that ship masters take to avoid them as well as to the manoeuvring in heavy seas. The role of the wave forecast and weather routing software is also discussed.

  10. Characterization of in-containment cables for nuclear plant life extension

    International Nuclear Information System (INIS)

    DuCharme, A.R.; Bustard, L.D.

    1988-01-01

    Electrical cable is made by a large number of manufacturers and used for a variety of applications in nuclear plants. cables have been identified in the Monticello and Surry Pilot Plant life extension studies and the NRC Nuclear Plant Aging Research Program as components important to the economic and safety aspects of life extension. Currently, fitness for service is largely determined by preoperational testing. The US Department of Energy is supporting work at Sandia National Laboratories to assess the technical basis for the life extension of cables found inside containment at US nuclear plants. The work is being performed in coordination with the Nuclear Management and Resource Council's (NUMARC) NUPLEX Working Group. The initial task of this effort is to characterize the design attributes of in-containment cables. This has been completed via development of a data base depicting the manufacturer, type, material composition, use, qualification, and relative popularity of cables installed in containment. Other ongoing work is focused on a review of cable operational experience and assessment of the issues affecting cable life extension. In the long term, the work aims to identify the technical criteria and life extension strategies needed to support continued cable qualification by nuclear plant owner/operators. 7 refs., 4 tabs

  11. Safeguard assessment for life extension in nuclear power plants (NPPs) using a production function

    International Nuclear Information System (INIS)

    Woo, Tae-Ho; Lee, Un-Chul

    2011-01-01

    Research highlights: → The numerical value is constructed for the secure operation. → As the power increases, the NSEF increases. → Specific month could be indicated by the relative value of NSEF. → It is suggested for the better power in NPPs. → There is another possibility for the secure operation factors. - Abstract: Life extension is investigated as a safeguard assessment for the stability on the operation of the nuclear power plants (NPPs). The Cobb-Douglas function, one of the production functions, is modified for the nuclear safeguard in NPPs, which was developed for the life quality of the social and natural objects. Nuclear Safeguard Estimator Function (NSEF) is developed for the application in NPPs. The cases of NPPs are compared with each other in the aspect of the secure performance. The results are obtained by the standard productivity comparisons with the designed power operations. The range of secure life extension is between 1.008 and 5.353 in 2000 MW e and the range is between 0.302 and 0.994 in 600 MW e . So, the successfulness of the power operation increases about 5 times higher than that of the interested power in this study, which means that the safeguard assessment has been performed in the life extension of the NPPs. The technology assessment (TA) is suggested for the safe operation which is an advanced method comparing conventional probabilistic safety assessment (PSA).

  12. Economic evaluation of Kori and Wolsong Unit 1 plant life extension

    International Nuclear Information System (INIS)

    Song, T. H.; Jeong, I. S.

    2002-01-01

    24 years have been passed since Kori Unit 1 began its commercial operation, and 19 years have been passed since Wolsong Unit 1 began its commercial operation. As the end point of design life become closer, plant life extension and periodic safety assessment is paid more and more attention to by the utility company. In this paper, the methodologies and results of plant lifetime management economic evaluations of both units have been presented in comparison with Korean standard nuclear power plant 10, 20 and 30 year life extension cases respectively. In addition to that, sensitivity analysis and break even point analysis results are presented with the variables of capacity factor, operation and maintenance cost, and discount rate

  13. Shelf life extension for the lot AAE nozzle severance LSCs

    Science.gov (United States)

    Cook, M.

    1990-01-01

    Shelf life extension tests for the remaining lot AAE linear shaped charges for redesigned solid rocket motor nozzle aft exit cone severance were completed in the small motor conditioning and firing bay, T-11. Five linear shaped charge test articles were thermally conditioned and detonated, demonstrating proper end-to-end charge propagation. Penetration depth requirements were exceeded. Results indicate that there was no degradation in performance due to aging or the linear shaped charge curving process. It is recommended that the shelf life of the lot AAE nozzle severance linear shaped charges be extended through January 1992.

  14. Life extension of the BR2 aluminium vessel

    International Nuclear Information System (INIS)

    Koonen, E.; Fabry, A.; Chaouadi, R.; Verwerft, M.; Raedt, C. de; Winckel, S. van; Wacquier, W.; Dadoumont, J.; Verwimp, A.

    2000-01-01

    The BR2 reactor has recently undergone a major refurbishment comprising the replacement of all vessel internals. The vessel itself however was not replaced. An important requalification programme has been executed to prove that the vessel would remain fit during the contemplated life extension period of BR2. Representative material samples could be obtained from the shroud surrounding the vessel. A comprehensive in-service inspection was carried out and a vessel surveillance programme has been established. (author)

  15. Crack arrest concepts for failure prevention and life extension. Proceedings

    International Nuclear Information System (INIS)

    Wiesner, C.S.

    1996-01-01

    These proceedings contain the thirteen papers presented at a seminar on crack arrest concepts for failure prevention and life extension. They provide a picture of the current position of crack arrest testing, models and applications, discussion of the relevance of recent research to industrial problems, and an assessment of whether the application of crack arrest models provides additional safety. Separate abstracts have been prepared for seven papers of relevance to the nuclear industry and, in particular, reactor pressure vessels. (UK)

  16. Development of a support system to make economic and technical assessments for the issues relating to plant life extension

    International Nuclear Information System (INIS)

    Takao, T.; Soneda, N.; Sakai, T.

    1994-01-01

    To realize the life extension of nuclear power plants, overall evaluation for the plant is required, which covers technology, economy such as cost of repair or/and replacement of components, and regal regulations for licensing. A prototype of integrated assessment support system for life extension ''INPLEX'' have developed in order to evaluate the technical and economic issues relating to the plant life extension and to make a life extension scenario. Analysis procedure of INPLEX is as follows. A comparison of the cost between the life extension and the reconstruction is made to see whether the life extension is cost effective or not. Next, components required detailed assessments are selected, and the residual life assessment of these components are made. After those procedures life extension measures are selected and the implementation time schedule is set on the basis of the formulas for predicting the degradation of the components and the component reliability data. Finally the implementation time schedule is optimized from the viewpoint of economy, and the life extension scenario is proposed. INPLEX also has the data base ''PRINS'', in which information and data related to life extension are registered, such as component degradation experiences, degradation management methodologies, degradation mitigation measures, and so on. PRINS can be referred at any time during the operation of INPLEX

  17. Life span extension and neuronal cell protection by Drosophila nicotinamidase.

    Science.gov (United States)

    Balan, Vitaly; Miller, Gregory S; Kaplun, Ludmila; Balan, Karina; Chong, Zhao-Zhong; Li, Faqi; Kaplun, Alexander; VanBerkum, Mark F A; Arking, Robert; Freeman, D Carl; Maiese, Kenneth; Tzivion, Guri

    2008-10-10

    The life span of model organisms can be modulated by environmental conditions that influence cellular metabolism, oxidation, or DNA integrity. The yeast nicotinamidase gene pnc1 was identified as a key transcriptional target and mediator of calorie restriction and stress-induced life span extension. PNC1 is thought to exert its effect on yeast life span by modulating cellular nicotinamide and NAD levels, resulting in increased activity of Sir2 family class III histone deacetylases. In Caenorhabditis elegans, knockdown of a pnc1 homolog was shown recently to shorten the worm life span, whereas its overexpression increased survival under conditions of oxidative stress. The function and regulation of nicotinamidases in higher organisms has not been determined. Here, we report the identification and biochemical characterization of the Drosophila nicotinamidase, D-NAAM, and demonstrate that its overexpression significantly increases median and maximal fly life span. The life span extension was reversed in Sir2 mutant flies, suggesting Sir2 dependence. Testing for physiological effectors of D-NAAM in Drosophila S2 cells, we identified oxidative stress as a primary regulator, both at the transcription level and protein activity. In contrast to the yeast model, stress factors such as high osmolarity and heat shock, calorie restriction, or inhibitors of TOR and phosphatidylinositol 3-kinase pathways do not appear to regulate D-NAAM in S2 cells. Interestingly, the expression of D-NAAM in human neuronal cells conferred protection from oxidative stress-induced cell death in a sirtuin-dependent manner. Together, our findings establish a life span extending the ability of nicotinamidase in flies and offer a role for nicotinamide-modulating genes in oxidative stress regulated pathways influencing longevity and neuronal cell survival.

  18. Orion: a glimpse of hope in life span extension?

    Science.gov (United States)

    Muradian, K; Bondar, V; Bezrukov, V; Zhukovsky, O; Polyakov, V; Utko, N

    2010-01-01

    Orion is a multicomponent drug based on derivatives of taurocholic acid and several other compounds. Application of Orion into the feeding medium of Drosophila melanogaster resulted in increased life span and survival at stressful conditions. Two paradoxical features of the drug should be stressed: The "age-threshold" (life span extension was observed only when the drug was applied starting from the second half of life) and induction of "centenarian" flies (older 100 days). Orion enhanced survival at heat shock (38 degrees C) and acidic (pH = 1.6) or alkaline (pH = 11.8) feeding mediums, but not at oxidative stresses modeled by 100% oxygen or application of hydrogen peroxide (H(2)O(2)).

  19. Condition analysis and operating lifetime extension concepts for wind turbines

    Energy Technology Data Exchange (ETDEWEB)

    Korzeniewski, Thomas [GMA-Engineering GmbH, Hamburg (Germany). Business Unit Wind Energy

    2014-11-01

    In Germany the basis for the expansion of wind energy was already laid at the beginning of the 1990s. Hence, the first wind turbines already started to reach the end of their permitted lifetime. At that time as today the different wind turbine types were engineered for an operational lifetime of 20 years. As reliable wind turbines types were already available in the 1990s, it is technically and commercially reasonable to consider the extension of their operational lifetime. Of particular interest is the lifetime extension of wind turbine types installed in the beginning of the 2000s. During that period many wind turbine types were launched which absolutely correspond to state-of-the-art technology.

  20. Disinfestation and vase-life extension of orchids by irradiation

    International Nuclear Information System (INIS)

    Piriyathamrong, S.; Chouvalitvongporn, P.; Sudathit, B.

    1985-01-01

    Studies on disinfestation and vase-life extension of orchids by irradiation were conducted to determine whether gamma-radiation can be effectively used to eliminate thrips and prolong the vase life of cut flowers. Cut flowers of Dendrobium Pompadour were subjected to Co-60 irradiation at 0, 50, l00, l50, and 200 krd doses 5 to 6 hours after picking. The flowers were separated into two groups. The first group was used to count the number of thrips. The other group was held at controlled room temperature (20 0 C and 80 percent RH) for 36 hours before being unpacked and placed in water. The results of two experiments illustrated that at 2 days after irradiation at l50 and 200 krad no thrips were found on the flowers, whereas on flowers untreated and those treated at 50 and l00 krad, a higher number of thrips were detected. As far as the vase life is concerned, treated flowers have a shorter life. Irradiation at 0, 50, l00, l05, and 200 krad doses resulted in average vase life of l8.75, l2.l5, l0.85, 8.85, and 6.20 days, respectively, in the first test and l4.60, l0.05, 8.75, 7.35, and 6.85, respectively, in the second test. Increased doses of radiation caused flowers to wilt and drop off within a few days. Further study is being conducted

  1. Symposium on extension of life time of atomic energy facilities

    International Nuclear Information System (INIS)

    1987-01-01

    This symposium was held on November 18, 1987 in University of Tokyo under the sponsorship of Japan Welding Engineering Society. The papers were presented on the various problems on the examination of the extension of life time and the deterioration with the lapse of years of nuclear power plants, the data of corrosion fatigue strength in high temperature water and the controlling factors, the trend of the research on corrosion fatigue crack development in high temperature, high pressure water and future problems, long life corrosion fatigue characteristics and the method of estimating remaining life, the trend of the research on the neutron irradiation embrittlement of pressure vessels, the results of the property confirmation test on the strain aging of reactor pressure vessel materials, the evaluation of life time by probabilistic fracture mechanics, the radiation deterioration of electric wire coating and insulation materials, the deterioration of concrete structures with the lapse of years, and the detection of the deterioration with the lapse of years. (K.I.)

  2. Reliability Centered Maintenance as a tool for plant life extension

    International Nuclear Information System (INIS)

    Elliott, J.O.; Mulay, J.N.; Nakahara, Y.

    1991-01-01

    Currently in the nuclear industry there is a growing interest in lowering the cost and complexity of maintenance activities while at the same time improving plant reliability and safety in an effort to prepare for the technical and regulatory challenges of life extension. This seemingly difficult task is being aided by the introduction of a maintenance philosophy developed originally by the airline industry and subsequently applied with great success both in that industry and the U.S. military services. Reliability Centered Maintenance (RCM), in its basic form, may be described as a consideration of reliability and maintenance problems from a systems level approach, allowing a focus on preservation of system function as the aim of a maintenance program optimized for both safety and economics. It is this systematic view of plant maintenance, with the emphasis on overall functions rather than individual parts and components which sets RCM apart from past nuclear plant maintenance philosophies. It is also the factor which makes application of RCM an ideal first step in development of strategies for life extension, both for aging plants, and for plants just beginning their first license term. (J.P.N.)

  3. Life extension, overpopulation and the right to life: against lethal ethics.

    Science.gov (United States)

    Cutas, D E

    2008-09-01

    Some of the objections to life-extension stem from a concern with overpopulation. I will show that whether or not the overpopulation threat is realistic, arguments from overpopulation cannot ethically demand halting the quest for, nor access to, life-extension. The reason for this is that we have a right to life, which entitles us not to have meaningful life denied to us against our will and which does not allow discrimination solely on the grounds of age. If the threat of overpopulation creates a rights conflict between the right to come into existence, the right to reproduce, the right to more opportunities and space (if, indeed, these rights can be successfully defended), and the right to life, the latter ought to be given precedence.

  4. Overview of plant life extension technology development in Japan

    International Nuclear Information System (INIS)

    Takahashi, T.; Arai, H.; Akiyama, M.; Mishima, Y.; Okubo, T.

    1993-01-01

    In Japan, it is expected that the nuclear power will continue to play an important role in electric power supply. Since it is expected that the fast breeder reactor (FBR) will be introduced sometime during the first half of the 21st century, light water reactors (LWRs) will continue to play a key role some 30 to 40 years to come. For this reason, technology development projects are being implemented to further enhance light water reactor technology and thereby improve the reliability of LWRs. From this point, the Plant Life Extension (PLEX) technology development program [1-4] is entrusted by the Ministry of International Trade and Industry to the Japan Power Engineering and Inspection Corporation (JAPEIC). This program is an 11-year plan which started in 1985. The objectives are to extend the service lives of existing LWRs to increase the energy generated by these plants during their lifetime, and to reduce the lifetime generating costs. In this report, we will present our project overview and recent activities with respect to extensive verification tests on component material behavior. The JAPEIC PLEX project is divided into 3 phases. Phase I is the feasibility study. Phase 2 involves the verification tests and the evaluation of life extension technologies. The overall evaluation of the project will be conducted in Phase 3. The feasibility study of Phase I has been completed in fiscal year 1985 and 1986. In Phase I, the important components (the components and structures that are likely to govern the lives of nuclear power plants) have been selected. (author)

  5. Repair and replacement of reactor internals for plant life extension

    International Nuclear Information System (INIS)

    Graae, T.

    1998-01-01

    Recent experience from early Swedish BWRs corroborate that all components in a nuclear power plant can be repaired or replaced with new ones. Oskarshamn 1 has gone through a thorough refurbishment project. A number of internals were repaired or replaced including the core shroud support which was welded to the bottom of the reactor pressure vessel. The project verifies that it is fully possible to carry out complicated inspection and repair work inside a nuclear pressure vessel which has been in operation for more than 20 years. Along with increased capacity factor, operating nuclear power plants get the financial conditions needed for extensive repair and modernization projects. Large power output leads to short pay-back times for the investments. The FENIX project at Oskarshamn 1 is such a project. There are utilities whose policy is to keep their plants in as-new condition for an unlimited length of time. (orig.)

  6. Plant control system upgrades in the context of industry trends towards plant life-extension

    International Nuclear Information System (INIS)

    De Grosbois, J.; Basso, R.; Hepburn, A.; Kumar, V.

    2002-01-01

    Domestic CANDU nuclear plants were brought online between 1972 and 1986. Over the next decade, most of these stations will be nearing the end of their designed operating life. Effort has traditionally been placed on ensuring that the existing installed plant control system equipment could operate reliably until the end of this design life. Until recently, little attention has been given to plant control system upgrades or replacements to meet the expected requirement for 30+ years of additional plant operation following potential plant refurbishments. Industry developments are changing this thinking. The combination of expected increases in electricity demand (and prices), and the many recent successful turnaround stories of U.S. nuclear power plants has resulted in new interest in plant life improvement and plant life extension programs. Plant control system upgrade decisions are now being driven by the need to replace or upgrade these systems to support plant life extension. This article is the first of several that investigate aspects of plant control system upgrades or replacement, specifically in the context of the CANDU station digital control computers (DCCs). It sets the context for the discussion in the subsequent articles by providing a brief review of industry trends favouring plant refurbishment, by outlining the basic issues of aging and obsolescence of control system equipment, by establishing the need for upgrades and replacements, and by introducing some of the basic challenges to be addressed by the industry as it moves forward. (author)

  7. Life extension and replacement management for RAPS type steam generators

    International Nuclear Information System (INIS)

    Arya, R.C.; Rastogi, A.K.

    1996-01-01

    The steam generating equipment in first four units of Indian PHWRs Rajasthan Atomic Power Station (RAPS) 1-2 and Madras Atomic Power Station (MAPS) 1-2 are hairpin type and comprise of eight boiler assemblies. Each assembly consists of identical, single pass, inverted and vertical hairpin heat exchangers (10 for RAPS and 11 for MAPS) containing 195 monel-400 U tubes of 12.7 mm dia x 1.242 mm thick. The hot heavy water flows through these tubes and imparts heat to feed, light demineralized water entering the shell at the bottom of preheat leg. The heat is generated on the outer surface of the tubes. Details of studies carried out for life extension and replacement management for RAPS type steam generators are given. 1 fig., 5 tabs

  8. Near-term benefits of the plant life extension program

    International Nuclear Information System (INIS)

    Kaushansky, M.M.

    1987-01-01

    The aging process can be expected to reduce the availability and increase the production costs of nuclear power plants over time. To mitigate this process and recover or enhance plant availability, capacity, thermal efficiency, and maintenance expenditures, the utility must dedicate increased attention and commitment to a comprehensive plant life extension (PLEX) program. Improvements must be justified by balancing the cost of the recommended modifications with the economic value of benefits obtained from its implementation. It is often extremely difficult for utility management to make an optimal selection from among hundreds of proposed projects, most of which are cost-effective. A properly structured PLEX program with an emphasis on near-term benefits should provide the utility with a means of evaluating proposed projects, thus determining the optimum combination for authorization and implementation

  9. Extension of TFTR operations to higher toroidal field levels

    International Nuclear Information System (INIS)

    Woolley, R.D.

    1995-01-01

    For the past year, TFTR has sometimes operated at extended toroidal field (TF) levels. The extension to 5.6 Tesla (79 kA) was crucial for TFTR's November 1994 10.7 MW DT fusion power record. The extension to 6.0 Tesla (85 kA) was commissioned on 9 September 1995. There are several reasons that one could expect the TF coils to survive the higher stresses that develop at higher fields. They were designed to operate at 5.2 Tesla with a vertical field of 0.5 Tesla, whereas the actual vertical field needed for the plasma does not exceed 0.35 Tesla. Their design specification explicitly required they survive some pulses at 6.0 Tesla. TF coil mechanical analysis computer models available during coil design were crude, leading to conservative design. And design analyses also had to consider worst-case misoperations that TFTR's real time Coil Protection Calculators (CPCs) now positively prevent from occurring

  10. BIF butterfly valve life extension at WNP-2

    International Nuclear Information System (INIS)

    Armstrong, D.

    1991-01-01

    Primary containment purging, venting, inerting, and reactor building ventilation at the WNP-2 plant are accomplished with a series of large butterfly valves. A total of 31 valves which are similar in design, but of different sizes, employ an elastomer to achieve sealing integrity when closed. These valves, which were originally manufactured by BIF, a unit of General Signal, range in size from 18 to 84 inches in diameter. Service life in the plant was much less than desired for safety-related equipment, and several seal failures had been experienced shortly after valve overhaul. This program covers a design change made to enhance performance of the elastomer seal to achieve a very meaningful life extension. While numerous configurations of BIF valves exist, this work relates only to the model 657 unit assembled with an elastomer seal mounted onto the valve disc by a stainless steel clamping ring held with studs and nuts. The problems encountered, and the steps taken to resolve the deficiencies may, however, be applicable to other butterfly valve configurations

  11. Pattern-recognition system application to EBR-II plant-life extension

    International Nuclear Information System (INIS)

    King, R.W.; Radtke, W.H.; Mott, J.E.

    1988-01-01

    A computer-based pattern-recognition system, the System State Analyzer (SSA), is being used as part of the EBR-II plant-life extension program for detection of degradation and other abnormalities in plant systems. The SSA is used for surveillance of the EBR-II primary system instrumentation, primary sodium pumps, and plant heat balances. Early results of this surveillance indicate that the SSA can detect instrumentation degradation and system performance degradation over varying time intervals, and can provide derived signal values to replace signals from failed critical sensors. These results are being used in planning for extended-life operation of EBR-II

  12. Concept design of overall evaluation system for nuclear plant life extension, (1)

    International Nuclear Information System (INIS)

    Takao, Takeshi

    1989-01-01

    In this report the frameworks of the plans for the Overall Evaluation System and the 8 systems concerning the plant Life extension are discussed. Main results are as follows. 1) The extension period decision subsystem supported by the AI techniques and Fuzzy theory will be added to the Overall Evaluation System. By using this subsystem the plant lives will be overall evaluated. 2) The range of the data collection for constructing the plant operation and maintenance data base is covered by, i) Operation data in the typical plant start/stop cycling, ii) Operation data at the representative point of the period, iii) All data of the repair and replacement. 3) The degradation monitoring and diagnosing system will be constructed for the expert system based on the knowledge base using the elastic wave theorem. (author) 74 refs

  13. Aging management and life extension - Containment aging study

    International Nuclear Information System (INIS)

    Tai, Tom M.; Deng, Daniel

    2004-01-01

    Bechtel is currently completing an aging study on a concrete containment structure. The target plant is a two-unit PWR plant with a generating capacity of about 850 MWe from each unit. Both units are less than 20 years old. The total electrical energy output from this plant site accounts for more than 50% of the utility's baseload operation. Although no utility in the United States has made a decision to submit a license renewal application, some have begun to investigate the feasibility of developing an life cycle management (LCM) program for a strategy to operate their plants efficiently, to investigate the financial benefit and safety implications of license renewal to operate their nuclear power plants beyond their current licensed periods, and to prepare a program plan for plant decommissioning. The LCM program includes economic, environmental, regulatory and technical aspects of continuing plant operations beyond the current license period. The Electric Power Research Institute (EPRI) has been supportive to assist utilities and owners groups in their research and development efforts to develop the technical requirements and the issues associated with important to license renewal structures. The focus of this paper is on the technical issues related to the evaluation of the material condition of the containment structure with respect to aging and the effective management of that aging. (author)

  14. Procedure for validating the life extension for the WWER-440 internals at NV NPP unit 3

    International Nuclear Information System (INIS)

    Filatov, V.M.; Evropin, S.V.

    2001-01-01

    The design lifetime (30 years) of the 1st generation WWER-440 reactor facilities is nearing completion in Russia. One of the major problems is to validate the life extension (LE) of the reactor internals ensuring the core arrangement and free passage of the control and protection system components during different operating modes, emergency modes included. The internals at the 1st generation units are designed so that to enable their replacement. But it requires a lot of funds and time. The work has been done to demonstrate that the internals may be further safely operated without their components being replaced provided their strength, longevity and serviceability are sufficiently validated. (author)

  15. The method of life extension for the High Flux Isotope Reactor vessel

    International Nuclear Information System (INIS)

    Chang, Shib-Jung.

    1995-01-01

    The state of the vessel steel embrittlement as a result of neutron irradiation can be measured by its increase in the nil ductility temperature (NDT). This temperature is sometimes referred to as the brittle-ductile transition temperature (DBT) for fracture. The life extension of the High Flux Isotope Reactor (HFIR) vessel is calculated by using the method of fracture mechanics. A hydrostatic pressure test (hydrotest) is performed in order to determine a safe vessel static pressure. It is then followed by using fracture mechanics to project the reactor life from the safe hydrostatic pressure. The life extension calculation provides the following information on the remaining life of the reactor as a function of the nil ductility temperature increase: the probability of vessel fracture due to hydrotest vs vessel life at several hydrotest pressures; the hydrotest time interval vs the uncertainty of the nil ductility temperature increase rate; and the hydrotest pressure vs the uncertainty of the nil ductility temperature increase rate. It is understood that the use of a complete range of uncertainties of the nil ductility temperature increase is equivalent to the entire range of radiation damage that can be experienced by the vessel steel. From the numerical values for the probabilities of the vessel fracture as a result of hydrotest, it is estimated that the reactor vessel life can be extended up to 50 EFPY (100 MW) with the minimum vessel operating temperature equal to 85 degree F

  16. On economic efficiency of nuclear power unit life extension using steam-gas topping plant

    International Nuclear Information System (INIS)

    Kuznetsov, Y.N.; Lisitsa, F.D.; Smirnov, V.G.

    2001-01-01

    The different options for life extension of the operating nuclear power units have been analyzed in the report with regard for their economic efficiency. A particular attention is given to the option envisaging the reduction of reactor power output and its subsequent compensation with a steam-gas topping plant. Steam generated at its heat-recovery boilers is proposed to be used for the additional loading of the nuclear plant turbine so as to reach its nominal output. It would be demonstrated that the implementation of this option allows to reduce total costs in the period of power plant life extension by 24-29% as compared with the alternative use of the replacing steam-gas unit and the saved resources could be directed, for instance, for decommissioning of a reactor facility. (authors)

  17. Contribution of Enterprise Asset Management (EAM) systems and CAP programs to support NPP life extension program

    International Nuclear Information System (INIS)

    Luanco, E.

    2007-01-01

    There is no specific IS (Information System) which supports the entire scope of a plant life extension, but there are a number of existing solutions that contributes to support it. Globally there are 2 categories of IS solution in the market: those supporting the Plant Life Improvement (PLIM) side of the life extension program and the others supporting the Plant Life Extension (PLEX) process side of it. The first category involves a large number of applications that span from ageing evaluation criteria programs, to monitoring solution for the critical components and to analysis and decision tools. The second category comprises solutions which support partially or globally the overall business process under a regulatory controlled manner. Both categories require 3 conditions to be satisfied: -) a comprehensive set of data (these data are often produced by various applications and the ability to correlate all the data together with a high degree of integrity is an important success factor); -) a feedback mechanism whose dual aspect is the monitoring of the ageing phenomena and the management of all the actions to be coordinated to ensure that preset objectives will be achieved in due time; and -) good people management to ensure particularly that staff will be well acquainted with new equipment or with new operating processes

  18. PLEXFIN a computer model for the economic assessment of nuclear power plant life extension. User's manual

    International Nuclear Information System (INIS)

    2007-01-01

    The IAEA developed PLEXFIN, a computer model analysis tool aimed to assist decision makers in the assessment of the economic viability of a nuclear power plant life/licence extension. This user's manual was produced to facilitate the application of the PLEXFIN computer model. It is widely accepted in the industry that the operational life of a nuclear power plant is not limited to a pre-determined number of years, sometimes established on non-technical grounds, but by the capability of the plant to comply with the nuclear safety and technical requirements in a cost effective manner. The decision to extend the license/life of a nuclear power plant involves a number of political, technical and economic issues. The economic viability is a cornerstone of the decision-making process. In a liberalized electricity market, the economics to justify a nuclear power plant life/license extension decision requires a more complex evaluation. This user's manual was elaborated in the framework of the IAEA's programmes on Continuous process improvement of NPP operating performance, and on Models for analysis and capacity building for sustainable energy development, with the support of four consultants meetings

  19. Life extension of components with high cumulative fatigue usage

    International Nuclear Information System (INIS)

    Server, W.L.

    1985-01-01

    The current ASME Boiler and Pressure Vessel Code fatigue design approach has significant margins of safety as evidenced by fatigue data on full-scale vessels. In order to extend qualification (life) of components which have reached the Code design usage limit of unity, improved criteria are needed which address crack initiation and propagation separately such that safe operation of these components is ensured. The fatigue initiation phase is composed of two processes: initial microcracking of internal particles or accumulation of local strain (cyclic slip) creating discontinuities which form microcracks, and the growth of the microcracks in a noncontinuum manner. The microcracks which initiate will eventually grow to a size in which continuum mechanics apply, and fracture mechanics concepts have been employed. The later propagation to failure of a component is also composed of two parts, continuum crack growth in a stable manner and eventual unstable fracture of the remaining ligament of material. This paper reviews the current status of technology in assessing initiation and propagation relative to the current design Code and suggests areas of improvement to cover extended life of high usage factor components. To illustrate some of these considerations, a case study for a small manufacturing defect was reviewed. A realistic component was analyzed to investigate the interrelationship between the ASME Code Section III design life and crack propagation behavior of a small manufacturing defect. A pressurized water reactor (PWR) primary coolant system was used in the analysis, and the terminal end of the hot-leg pipe at the safe end weld was selected since usage factors as high as 0.95 had been reported. The particular plant chosen was Zion-1 because the necessary information on loading, including thermal transients, was available in the open literature. 11 refs., 1 fig., 1 tab

  20. Comparison of Plant Life Management Approaches for Long Term Operations

    International Nuclear Information System (INIS)

    Kang, Kisig

    2012-01-01

    Plant life management can be defined as the integration of ageing and economic planning to maintain a high level of safety and optimize operations. Many Member States have given high priority to long term operation of nuclear power plants beyond the time frame originally anticipated (e. g. 30 or 40 years). Out of a total of 445 (369 GWe) operating nuclear power plants, 349 units (297 GWe) have been in operation for more than 20 years (as of November 2011). The need for engineering support to operation, maintenance, safety review and life management for long term operation as well as education and training in the field is increasingly evident. In addition the Fukushima accident has rendered all stake holders even more attentive to safety concerns and to the provision of beyond safety measures in the preparation and scrutiny of applications for operational design life extensions. In many countries, the safety performance of NPPs is periodically followed and characterized via the periodic safety review (PSR) approach. The regulatory The regulatory review and acceptance of the PSR gives the licensee the permission to operate the plant for up to the end of the next PSR cycle (usually 10 years). In the USA and other countries operating US designed plants, the license renewal application is based on the five pre-requisite requirements and ageing management programme for passive long life system structure and components(SSCs) and active systems is adequately addressed by the maintenance rule (MR) requirements and other established regulatory processes. Other Member States have adopted a combined approach that incorporates elements of both PSR and additional LRA specific requirements primarily focused on time limited ageing analysis. Taking into account this variety of approaches, the international atomic energy agency (IAEA) initiated work for collecting and sharing information among Member States about good practices on plant life management for long term operation in

  1. Probabilistic fracture mechanics analysis for the life extension estimate of the high flux isotope reactor vessel

    International Nuclear Information System (INIS)

    Chang, S.J.

    1997-01-01

    The state of the vessel steel embrittlement as a result of neutron irradiation can be measured by its increase in the nil ductility temperature (NDT). This temperature is sometimes referred to as the brittle-ductile transition temperature (DBT) for fracture. The life extension of the High Flux Isotope Reactor (HFIR) vessel is calculated by using the method of fracture mechanics. A new method of fracture probability calculation is presented in this paper. The fracture probability as a result of the hydrostatic pressure test (hydrotest) is used to determine the life of the vessel. The hydrotest is performed in order to determine a safe vessel static pressure. It is then followed by using fracture mechanics to project the safe reactor operation time from the time of the satisfactory hydrostatic test. The life extension calculation provides the following information on the remaining life of the reactor as a function of the NDT increase: (1) the life of the vessel is determined by the probability of vessel fracture as a result of hydrotest at several hydrotest pressures and vessel embrittlement conditions, (2) the hydrotest time interval vs the NDT increase rate, and (3) the hydrotest pressure vs the NDT increase rate. It is understood that the use of a complete range of uncertainties of the NDT increase is equivalent to the entire range of radiation damage that can be experienced by the vessel steel. From the numerical values for the probabilities of the vessel fracture as a result of hydrotest, it is estimated that the reactor vessel life can be extended up to 50 EFPY (100 MW) with the minimum vessel operating temperature equal to 85 degrees F

  2. Cost drivers for the assessment of nuclear power plant life extension

    International Nuclear Information System (INIS)

    2002-09-01

    In the period of the nineteen-sixties to eighties, nuclear power had rapidly expanded in many countries of the world. The nuclear power plants built in this period, will reach the end of their planned life in the near future. Statistics drawn from IAEA's Power Reactor Information System (PRIS) indicate that, by the end of 2001, there were 175 nuclear power units (NPPs) with about 122 GWe of net electrical capacity, having 21 to 45 years of operation. This represents about 34% of the total installed nuclear capacity in the world. Since these plants were initially designed for 30-40 years of operation, utilities operating such NPPs will now have to consider whether they will shutdown, decommission, and replace the plants reaching the end of their planned life, or refurbish the plants and extend their original design life. This decision is quite complex, involving a number of political, technical and economic issues. Finally, the utilities involved should manage their assets in a manner that is as close as practicable to the best possible economic optimum scenario. Well before the end of the plant life, NPP operators must evaluate the technical and economic feasibility for PLEX options, seek and obtain regulatory approvals, and implement PLEX schemes that are justified. Often they also have to substantiate the planned life extension, including the economic viability to the relevant governmental bodies, as well as to assure the general public acceptance. Economic feasibility analysis requires cost data that are not readily available. A recent IAEA review of published information on costs of PLEX revealed the scarcity of published information, while the estimated costs of NPP decommissioning are widely available. This is due in part to the reluctance by NPP operators to divulge the cost data that are considered commercial/confidential, as more plant operators are being privatised, and in part to the absence of a common framework and methodology to account for the

  3. Development of procedural requirements for life extension of nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Sang Hun; Son, Moon Kyu [Korea Association for Nuclear Technology, Taejon (Korea, Republic of); Ham, Cheol Hun [The Catholic University of Korea, Seoul (Korea, Republic of); Chang, Keun Sun [Sunmoon Univ., Asan (Korea, Republic of); Paek, Won Phil [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of); Cheong, Ji Hwan [Baekseok College Cultural Studies, Cheonan (Korea, Republic of)

    2001-03-15

    Current status of regulatory aspects of life extension and upgrading of NPPs is reviewed for major foreign countries. Most countries require similar technical requirements; however, procedural aspects differ country by country. Regulatory systems suitable for NPP life extension is investigated. The procedure and requirements for reassessment of design life should be established first; then it can be incorporated into the PSR system. The concept of 'Current Licensing Basis (CLB)' can be adopted in Korea, but further elaboration for terms and definitions is needed for common understanding between interested groups. The procedure for maintenance and backfitting should also be improved. The Systems, Structures, and Components (SSCs) that require development of regulatory requirements for life extension are identified based on extensive analysis of foreign experiences. By analyzing the rules and regulations related to life extension. Basic directions are suggested to harmonize or establish regulatory systems for life extension, two-step licensing, PSR, and backfitting.

  4. Technological feasibility of irradiating pineapples for shelf-life extension

    International Nuclear Information System (INIS)

    Sharma, Jiten

    2001-01-01

    The spoilage of food caused by infestation, contamination and deterioration of the world's food supply is enormous in the developing countries where warm and humid climate favour the growth of spoilage organisms and hasten deterioration of stored food. Particularly, in a country like India where the population growth has already attained one billion, any preventable loss of food is intolerable. Since food security of a nation also largely determines the economic stability as well as self-reliance, this problem draws utmost attention not only of the food scientists but also of the food policy makers. From these above facts, it may be concluded that radiation technology can be safely used for extending shelf-life of pineapple fruits thereby maximizing the transportation and marketing potentials. Consumption of such irradiated pineapples simultaneously does not pose any immediate or long-term human health risks. Keeping these techno-economic considerations in view establishment of large scale industrial operations for irradiating fruits, vegetables, cereals etc. are of immense importance

  5. Life Extension Program for the Modular Caustic Side Solvent Extraction Unit at Savannah River Site - 13179

    International Nuclear Information System (INIS)

    Samadi, Azadeh

    2013-01-01

    Caustic Side Solvent Extraction (CSSX) is currently used at the U.S. Department of Energy (DOE) Savannah River Site (SRS) for removal of cesium from the high-level salt-wastes stored in underground tanks. Currently, the Actinide Removal Process (ARP) and the CSSX process are deployed in the (ARP)/Modular CSSX Unit (MCU), to process salt waste for permanent disposition. The CSSX technology utilizes a multi-component organic solvent and annular centrifugal contactors to extract cesium from alkaline salt waste. The original plant was permitted for a three year design life; however, given the successful operation of the plant, a life extension program was completed to continue operations. The program included detailed engineering analyses of the life-expectancy of passive and active components, resulting in component replacement and/or maintenance and monitoring program improvements. The program also included a review of the operations and resulted in a series of operational improvements. Since the improvements have been made, an accelerated processing rate has been demonstrated. In addition, plans for instituting a next-generation solvent are in place and will enhance the decontamination factors. (author)

  6. Germany: the government has approved of the extension of the service life of nuclear reactors

    International Nuclear Information System (INIS)

    Anon.

    2010-01-01

    The German coalition government has decided on 28 september 2009 to expend the service life of the 17 operating nuclear reactors through the approval of the plan 'Energy 2050'. The average extension will be of 12 years. This decision will postpone the shutdown of the last reactor till 2040. The reciprocal arrangement implies that the nuclear plant operators (EON, RWE, Wattenfall and EnBW) will have to pay an annual tax of 2.3*10 9 euros till 2016. The operators will also have to finance a capital for the development of renewable energies: 200*10 6 euros in 2011 and in 2012 then 300*10 6 euros per year between 2013 and 2016 and eventually to pay a tax of 9 euros per MW of nuclear power produced. (A.C.)

  7. Evaluation of operating experience for service life of components

    International Nuclear Information System (INIS)

    Schulz, H.; Sunder, R.

    1987-01-01

    The evaluation of the operating experience of German light-water reactor components based on licensee event reports indicates that a large part of the defects and failures are caused by fatigue and/or corrosion type mechanisms. Actions have been taken to eliminate the causes by redesigning systems, replacement of components and change of operating procedures. The interaction of fatigue and corrosion mechanisms are not understood in all details today, further research is still necessary. To establish a more realistic data base of the local loading and water chemistry condition for all loading conditions the application of advanced monitoring systems is proposed. The benefits of these systems are that the operating procedures can be further optimized, the actual used life time fraction can be calculated regularly and the data base can be used for life time extension. (orig.) [de

  8. Life extension decision making of safety critical systems: An overview

    OpenAIRE

    Shafiee, Mahmood; Animah, I.

    2017-01-01

    In recent years, the concept of “asset life extension” has become increasingly important to safety critical industries including nuclear power, offshore oil and gas, petrochemical, renewable energy, rail transport, aviation, shipping, electricity distribution and transmission, etc. Extending the service life of industrial assets can offer a broad range of economic, technical, social and environmental benefits as compared to other end-of-life management strategies such as decommissioning and r...

  9. Model 9975 Life Extension Package 1 - Final Report

    International Nuclear Information System (INIS)

    Daugherty, W.

    2011-01-01

    Life extension package LE1 (9975-03382) was instrumented and subjected to a temperature/humidity environment that bounds KAMS package storage conditions for 92 weeks. During this time, the maximum fiberboard temperature was ∼180 F, and was established by a combination of internal heat (12 watts) and external heat (∼142 F). The relative humidity external to the package was maintained at 80 %RH. This package was removed from test in November 2010 after several degraded conditions were observed during a periodic examination. These conditions included degraded fiberboard (easily broken, bottom layer stuck to the drum), corrosion of the drum, and separation of the air shield from the upper fiberboard assembly. Several tests and parameters were used to characterize the package components. Results from these tests generally indicate agreement between this full-scale shipping package and small-scale laboratory tests on fiberboard and O-ring samples. These areas of agreement include the rate of fiberboard weight loss, change in fiberboard thermal conductivity, fiberboard compression strength, and O-ring compression set. In addition, this package provides an example of the extent to which moisture within the fiberboard can redistribute in the presence of a temperature gradient such as might be created by a 12 watt internal heat load. Much of the moisture near the fiberboard ID surface migrated towards the OD surface, but there was not a significant axial moisture gradient during most of the test duration. Only during the last inspection period (i.e. after 92 weeks exposure during the second phase) did enough moisture migrate to the bottom fiberboard layers to cause saturation. A side effect of moisture migration is the leaching of soluble compounds from the fiberboard. In particular, the corrosion observed on the drum appears related primarily to the leaching and concentration of chlorides. In most locations, this attack appears to be general corrosion, with shallow

  10. METHODS AND RESEARCH CONCERNING SERVICE LIFE EXTENSION OF SUPORTING STRUCTURES OF TRACTION ROLLING STOCK FOR INDUSTRIAL TRANSPORT

    Directory of Open Access Journals (Sweden)

    O. M. Bondarev

    2014-04-01

    Full Text Available Purpose. The purpose of work is scientifically grounded introduction of the acquired techniques into works for service life extension of the traction and motor rolling stock for industrial transport. Methodology. To achieve the purpose it was analyzed the acquired techniques for service life extension of the traction and motor rolling stock for mainline transport. The acquired techniques during solution of problems concerning the service life extension of rolling stock units were adapted to the locomotives TGM6A and traction aggregates OPE1. Findings. On the basis of experimental and theoretical complex of studies some results were obtained. They gave the ground to determine the possibility of acquired techniques use when solving the problems on service life extension of rolling stock units concerning locomotives TGM6A and traction aggregates OPE1. Originality. On the basis of conducted experimental and theoretical studies scientific maintenance of the works providing extension of service life of traction and motor units of industrial rolling stock was executed. Practical value. Technical solutions and measures, which have to be carried out during operation within the prolonged appointed service life of traction and motor units of industrial rolling stock enterprises using locomotives and traction aggregates to provide the basic technological cycles were developed.

  11. Aging of concrete components and its significance relative to life extension of nuclear power plants

    International Nuclear Information System (INIS)

    Naus, D.J.

    1987-01-01

    Nuclear power currently supplies about 16% of the US electricity requirements, with the percentage expected to rise to 20% by 1990. Despite the increasing role of nuclear power in energy production, cessation of orders for new nuclear plants in combination with expiration of operating licenses for several plants in the next 15 to 20 years results in a potential loss of electrical generating capacity of 50 to 60 gigawatts during the time period 2005 to 2020. A potential timely and cost-effective solution to the problem of meeting future energy demand is available through extension of the service life of existing nuclear plants. Any consideration of plant life extension, however, must consider the concrete components in these plants, since they play a vital safety role. Under the USNRC Nuclear Plant Aging Research (NPAR) Program, a study was conducted to review operating experience and to provide background that will lead to subsequent development of a methodology for assessing and predicting the effects of aging on the performance of concrete-based structures. The approach followed was in conformance with the NPAR strategy

  12. Novel Repair Technique for Life-Extension of Hydraulic Turbine Components in Hydroelectric Power Stations

    Science.gov (United States)

    Hiramatsu, Yoichi; Ishii, Jun; Funato, Kazuhiro

    A significant number of hydraulic turbines operated in Japan were installed in the first half of the 20th century. Today, aging degradation and flaws are observed in these turbine equipments. So far, Japanese engineers have applied NDI technology of Ultrasonic Testing (UT) to detect the flaws, and after empirical evaluation of the remaining life they decided an adequate moment to replace the equipments. Since the replacement requires a large-scale field site works and high-cost, one of the solutions for life-extension of the equipments is introduction of repair services. We have been working in order to enhance the accuracy of results during the detection of flaws and flaws dimensioning, in particular focusing on the techniques of Tip-echo, TOFD and Phased-Array UT, accompanied by the conventional UT. These NDI methods made possible to recognize the entire image of surface and embedded flaws with complicated geometry. Then, we have developed an evaluation system of these flaws based on the theory of crack propagation, of the logic of crack growth driven by the stress-intensity factor of the crack tip front. The sophisticated evaluation system is constituted by a hand-made software and database of stress-intensity factor. Based on these elemental technologies, we propose a technique of repair welding to provide a life-extension of hydraulic turbine components.

  13. Development and application of the methodology to establish life extension and modernization plan of aged hydropower plants

    International Nuclear Information System (INIS)

    Kim, Jong Sung; Kwon, Hyuck Cheon; Song, Byung Hun; Kwon, Chang Seop

    2009-01-01

    This paper provides how to establish an integrated plan for LE (Life Extension) and MD (MoDernization) of aged hydropower plants. The methodology is developed through review of overseas/domestic LE/MD histories, investigation of the previous overseas methodologies and consideration of domestic practices. The methodology includes reviews of the various factors such as condition, operation and maintenance history, up-to-date technology, and economic benefit. In order to establish the life extension/modernization plan, the methodology is applied to the domestic aged hydropower plants. Finally, priority rankings and draft practice plans for LE/MD are derived.

  14. Certain extensions of vertex operator algebras of affine type

    International Nuclear Information System (INIS)

    Li Haisheng

    2001-01-01

    We generalize Feigin and Miwa's construction of extended vertex operator (super)algebras A k (sl(2)) for other types of simple Lie algebras. For all the constructed extended vertex operator (super)algebras, irreducible modules are classified, complete reducibility of every module is proved and fusion rules are determined modulo the fusion rules for vertex operator algebras of affine type. (orig.)

  15. Modular space station, phase B extension. Program operations plan

    Science.gov (United States)

    1971-01-01

    An organized approach is defined for establishing the most significant requirements pertaining to mission operations, information management, and computer program design and development for the modular space station program. The operations plan pertains to the space station and experiment module program elements and to the ground elements required for mission management and mission support operations.

  16. Extension Education Symposium: Getting the Most Out of Your Extension Appointment and Still Having a Life

    OpenAIRE

    Powers, W.; Cockett, Noelle E.; Lardy, Gregory P.

    2017-01-01

    Managing the demands of an academic appointment in extension can be a challenging task. Demands from constituent groups, expectations of supervisors, and rigors of promotion and tenure processes can create pressures that young faculty did not expect. Throw in spousal and family duties and you have created a situation that many will find hard to navigate. However, there are ways to cope and, even better news, there are ways to excel in meeting the demands of an academic appointment and enjoyin...

  17. International requirements for life extension of nuclear power plants; Internationale Anforderungen zur Lebensdauerverlaengerung von Kernkraftwerken

    Energy Technology Data Exchange (ETDEWEB)

    Wernicke, Robert [TUeV NORD SysTec GmbH und Co. KG, Abt. Festigkeit und Konstruktion, Hamburg (Germany)

    2009-11-15

    Lifetime extension or long-term operation of nuclear facilities are topics of great international significance against the backdrop of a fleet of nuclear power plants of which many have reached 2/3 of their planned life. The article deals with the conditions for, and the specific requirements of, seeking long-term operation of nuclear power plants as established internationally and on the basis of IAEA collections. Technically, long-term operation is possible for many of the nuclear power plants in the world because, normally, they were built on the basis of conservative rules and regulations and, as a consequence, incorporate significant additional safety. Application of requirements to specific plants implies assessments of technical safety which show that conservative design philosophies created reserves and, as a consequence, there is an adequate level of safety also in long-term plant operation. For this purpose, the technical specifications must be revised, necessary additions made, and (international) operating experience taken into account and management of aging established. Two examples are presented to show how the approach to long-term plant operation is put into practice on a national level. (orig.)

  18. Life Extension of Critical Components Betterments and Modifications

    International Nuclear Information System (INIS)

    Baero, G.; D'Annucci, F.; Russ, J.

    1992-01-01

    Ageing plants reveal that some of the components within the primary circuit do not show the expected life time. Betterments have been enabled by repairing or replacing defective parts. ABB. has developed specific repair processes to meet these requirements. The goal is to be as flexible as possible in order to adjust methods, procedures, and equipment to the specific needs of each plant within the shortest time possible. Inspection methods and repair procedures are discussed to present betterments and modifications for some components within the primary circuit by explaining the ABB. approach for e. g. the Inspection of pressure vessel closure head penetrations: The manipulator is designed, constructed, controlled and monitored just like a manipulator developed for steam generator inspections and repair. The E CT-probes are qualified to resolve cracks ensuring a high sensitivity if there is no thermal sleeve or if the probe is inserted into the gap. Looking through the thermal sleeve by an E CT-probe reduces the sensitivity slightly. The inspection and repair of internals, e. g. fuel alignment pins and baffle former bolts: the UST-methods, the manipulator equipment, the tools and the procedures are provided to find defective pins resp. Bolts, and to replace them. Approximately 1000 fuel alignment pins have been replaced. Three inspection systems have been provided to inspect baffle former bolts. They were upgraded for an exchange of baffle former bolts. The bolt resp. pin betterment is achieved by an improved material and a ventilation preventing stagnant water. Advances in maintenance of steam generators: Focus is given to identify potentially defective steam generator tube areas within tube support plates or ABB reviation bars. The good experience gained with the Micro lock of ABB. removable plugs is transferred to the sleeves which have a Micro lock joint at the bottom. Chemically cleaning the secondary side of a steam generator utilizing the SIG process at

  19. Update on the status of life extension in U.S. Nuclear Power Plants

    International Nuclear Information System (INIS)

    Hevia Ruperez, F.; Lehnert, D.F.; Gregor, F.E.

    1997-01-01

    The purpose of this paper is to provide an update on the status of key activities that may affect the plant life extension option for U.S. nuclear power plants and to explain how the progress on the regulatory and technical developments may affect the world-wide nuclear industry. Establishing a predictable and stable regulatory process is the final piece that is needed by U.S. utilities to confidently consider the plant life extension option in their strategic planning. Certain technical issues were also identified in the previous studies where additional investigation would benedict the U.S. nuclear power industry's understanding of an aging effect and/or capability to demonstrate that the aging effect can be effectively managed. It is concluded that the lessons learned from the U.S. industry activities and the associated interactions with the NRC are leading to a positive indication that U.S. utilities believe the differences between the NRC and industry on the implementation of the amended license renewal rule can be successfully resolved and the that many utilities generally are interested in pursuing the life extension option as part of their strategic planning. The methodology and guidance developed in the U.S. for performing integrated plant assessments and evaluating time-limited aging analyses will be of significant interest to utilities and regulators in other countries. They will undoubtedly lay the foundation for an acceptable approach for demonstrating that aging processes are being processes are being effectively managed by plant programs and that safety margins or bases will be maintained during an extended operating period. (Author)

  20. Service Life Extension of the Propulsion System of Long-Term Manned Orbital Stations

    Science.gov (United States)

    Kamath, Ulhas; Kuznetsov, Sergei; Spencer, Victor

    2014-01-01

    . There are no representative ground test articles for some of the components. A 'test everything' approach would require manufacturing new test articles. The paper outlines some of the techniques used for selective testing, by way of cherry picking candidate components based on failure mode effects analysis, system level impacts, hazard analysis, etc. The type of testing required for extending the service life depends on the design and criticality of the component, failure modes and failure mechanisms, life cycle margin provided by the original certification, operational and environmental stresses encountered, etc. When specific failure mechanism being considered and the underlying relationship of that mode to the stresses provided in the test can be correlated by supporting analysis, time and effort required for conducting life extension testing can be significantly reduced. Exposure to corrosive propellants over long periods of time, for instance, lead to specific failure mechanisms in several components used in the propulsion system. Using Arrhenius model, which is tied to chemically dependent failure mechanisms such as corrosion or chemical reactions, it is possible to subject carefully selected test articles to accelerated life test. Arrhenius model reflects the proportional relationship between time to failure of a component and the exponential of the inverse of absolute temperature acting on the component. The acceleration factor is used to perform tests at higher stresses that allow direct correlation between the times to failure at a high test temperature to the temperatures to be expected in actual use. As long as the temperatures are such that new failure mechanisms are not introduced, this becomes a very useful method for testing to failure a relatively small sample of items for a much shorter amount of time. In this article, based on the example of the propulsion system of the first ISS module Zarya, theoretical approaches and practical activities of

  1. Food losses, shelf life extension and environmental impact of a packaged cheesecake: A life cycle assessment.

    Science.gov (United States)

    Gutierrez, Michele Mario; Meleddu, Marta; Piga, Antonio

    2017-01-01

    Packaging is associated with a high environmental impact. This is also the case in the food industry despite packaging being necessary for maintaining food quality, safety assurance and preventing food waste. The aim of the present study was to identify improvements in food packaging solutions able to minimize environmental externalities while maximizing the economic sustainability. To this end, the life cycle assessment (LCA) methodology was applied to evaluate the environmental performance of new packaging solutions. The environmental impact of packaging and food losses and the balance between the two were examined in relation to a cheesecake that is normally packaged in low density polyethylene film and has a limited shelf life due to microbial growth. A shelf life extension was sought via application of the well-established modified atmosphere packaging (MAP) technique. Samples for MAP (N 2 /CO 2 : 70/30) were placed inside multilayer gas barrier trays, which were then wrapped with a multilayer gas and water barrier film (i.e. AerPack packaging); control batches were packaged in gas barrier recycled polyethylene terephthalate (XrPet) trays and wrapped with a XrPet film. Samples were then stored at 20°C and inspected at regular intervals for chemical-physical, microbiological and sensory parameters. Results show that the new packaging solution could considerably extend the shelf life of cheesecakes, thereby reducing food waste and decreasing the overall environmental impact. Moreover, the new packaging allows one to minimize transport costs and to generate economies of scale in manufacturing. Copyright © 2016 Elsevier Ltd. All rights reserved.

  2. Shelf Life Extension of Toasted Groundnuts through the Application ...

    African Journals Online (AJOL)

    The use of cassava starch and soy protein concentrate edible coatings containing 20% glycerol in extending the shelf life of toasted groundnut during ambient (27 ± 1oC) storage for 14 days was studied. Chemical indices of oxidative rancidity and sensory parameters were evaluated using standard procedures. Moisture ...

  3. Life extension, power upgrade, and return to service work for Pickering NGS and other PWR and CANDU plants

    International Nuclear Information System (INIS)

    Millman, J.; Idvorian, N.; Schneider, W.

    2002-01-01

    Work on life extension, power upgrade and return to service has been performed and is in progress for a number of PWR and CANDU plants. For PWR plants, power upgrade work has been done for the new replacement steam generators in several cases. This work consists of redoing the formal equipment qualification analysis and reports for the uprated operating conditions to support the application for license adjustment. Life extension assessments have been performed for several CANDU plants. These are highly detailed assessments in which the particular steam generator is reassessed part by part as to the ability of each to sustain full life operation and also extended life operation. Return to service work for Pickering NGSA specifically has included this type of assessment and also specific repair, cleaning and retrofit activities including secondary side inspection, waterlancing, divider plate repair, eddy current inspection, etc. Steam generator modifications and retrofit work have been performed in a number of cases. The paper discusses various life extension, power upgrade, equipment modification and return to service activities all of which are part of the renewed drive in the industry to realise the full potential of nuclear plants by getting more and better performance from the extended service of existing plants. (author)

  4. Physics based modeling of a series parallel battery pack for asymmetry analysis, predictive control and life extension

    Science.gov (United States)

    Ganesan, Nandhini; Basu, Suman; Hariharan, Krishnan S.; Kolake, Subramanya Mayya; Song, Taewon; Yeo, Taejung; Sohn, Dong Kee; Doo, Seokgwang

    2016-08-01

    Lithium-Ion batteries used for electric vehicle applications are subject to large currents and various operation conditions, making battery pack design and life extension a challenging problem. With increase in complexity, modeling and simulation can lead to insights that ensure optimal performance and life extension. In this manuscript, an electrochemical-thermal (ECT) coupled model for a 6 series × 5 parallel pack is developed for Li ion cells with NCA/C electrodes and validated against experimental data. Contribution of the cathode to overall degradation at various operating conditions is assessed. Pack asymmetry is analyzed from a design and an operational perspective. Design based asymmetry leads to a new approach of obtaining the individual cell responses of the pack from an average ECT output. Operational asymmetry is demonstrated in terms of effects of thermal gradients on cycle life, and an efficient model predictive control technique is developed. Concept of reconfigurable battery pack is studied using detailed simulations that can be used for effective monitoring and extension of battery pack life.

  5. Aging and life extension of major light water reactor components

    International Nuclear Information System (INIS)

    Shah, V.N.; MacDonald, P.E.

    1993-01-01

    An understanding of the aging degradation of the major pressurized and boiling water reactor structures and components is given. The design and fabrication of each structure or component is briefly described followed by information on the associated stressors. Interactions between the design, materials and various stressors that cause aging degradation are reviewed. In many cases, aging degradation problems have occurred, and the plant experience to date is analyzed. The discussion summarize the available aging-related information and are supported with extensive references, including references to US Nuclear Regulatory Commission (USNRC) documents, Electric Power Research Institute reports, US and international conference proceedings and other publications

  6. Trend in foreign countries of life extension for nuclear power plants

    International Nuclear Information System (INIS)

    Kusanagi, Hideo

    1992-01-01

    When the nuclear power generation in the world is converted to oil burning thermal power generation, the required quantity of oil is twice as much as the oil production in Saudi Arabia. This represents the size of the role that nuclear power generation plays. More than 30 years have already elapsed since the start of nuclear power generation, and the number of nuclear power plants in operation in the world was 426 as of the end of 1990, and their capacity of about 344 million kW is about 17% of the total generated electric power in the world. Though circumstances are different in respective countries, the construction of new nuclear power plants is not always advancing smoothly, and the possibility of operating existing nuclear power plants as long as possible has been investigated. In USA, the approved term of operation of nuclear power plants is 40 years, and the trend of the research and development of the plant life extension is described. In France, the life of nuclear power plants is not stipulated by the law. In U.K., also it is not stipulated by the law. The trend in these countries is reported. IAEA also has carried out the activities on this problem. (K.I.)

  7. Ethical objections against including life-extension costs in cost-effectiveness analysis: a consistent approach.

    Science.gov (United States)

    Gandjour, Afschin; Müller, Dirk

    2014-10-01

    One of the major ethical concerns regarding cost-effectiveness analysis in health care has been the inclusion of life-extension costs ("it is cheaper to let people die"). For this reason, many analysts have opted to rule out life-extension costs from the analysis. However, surprisingly little has been written in the health economics literature regarding this ethical concern and the resulting practice. The purpose of this work was to present a framework and potential solution for ethical objections against life-extension costs. This work found three levels of ethical concern: (i) with respect to all life-extension costs (disease-related and -unrelated); (ii) with respect to disease-unrelated costs only; and (iii) regarding disease-unrelated costs plus disease-related costs not influenced by the intervention. Excluding all life-extension costs for ethical reasons would require-for reasons of consistency-a simultaneous exclusion of savings from reducing morbidity. At the other extreme, excluding only disease-unrelated life-extension costs for ethical reasons would require-again for reasons of consistency-the exclusion of health gains due to treatment of unrelated diseases. Therefore, addressing ethical concerns regarding the inclusion of life-extension costs necessitates fundamental changes in the calculation of cost effectiveness.

  8. The PREEV project of the Latin American Forum.Regulatory practices on aging and life extension; El proyecto {sup P}reev del Foro Iberoamericano. Practicas reguladoras en envejecimiento y extension de vida.

    Energy Technology Data Exchange (ETDEWEB)

    Figueras, J. M.

    2011-07-01

    The American Forum Plenary approved in 2008 the PREEV project, Regulatory Practices in Aging and Life Extension, whose main objective is to improve the regulatory action with regard to the management programs of life and long-term operation of nuclear power plants in the countries of the region Latin American.

  9. Life extension for fossil power plants: The EPRI [Electric Power Research Institute] strategy

    International Nuclear Information System (INIS)

    Byron, J.; Dooley, B.

    1988-01-01

    Fossil fuel-fired generating plants have traditionally been built under the assumption of an economic life of 20-30 years. Due to low load growth, escalating interest rates and costs of construction, and increasing regulation, great interest is expressed in retaining these units in service for 50-60 years or longer. Life extension activities are part of an ongoing process that continues throughout the extended lives of a utility's units. The process begins with an initial evaluation of life extension as a generation alternative, resulting in a ranking of units for life extension and a prioritization of components for evaluation. As the process continues, more detailed inspection data are created by a three-level approach, as well as a means for collecting, organizing and scheduling the information. This is implemented through the Integrated Life Extension Management (ILEM) model. This model provides information needed for management decision making such as component performance on unit power rating, availability of components on unit availability, component performance on unit availability and overall costs of the life extension tasks. Risks involved in life extension include the initial unavailability of capacity credits, uncertainty as to the level of availability that can be achieved by the life-extended plant, and uncertainties in environmental compliance. 8 refs., 1 fig., 2 tabs

  10. Development of procedural requirements for life extension of nuclear power plants

    International Nuclear Information System (INIS)

    Lee, Sang Hoon; Son, Moon Kyu; Jeong, Ji Hwan; Chang, Keun Sun; Ham, Chul Hoon; Chang, Soon Hong

    2002-03-01

    Technical issues relevant to life extension of NPP were investigated. The GALL report, domestic PSR and periodic inspection rules were reviewed. Technical issues appearing in the safety evaluation reports related to license renewal of Calvert Ciffs 1 and 2 and Qconee 1,2 and 3 NPPs were reviewed. Preliminary study on PSA usage in NPP life extension assessment was performed and further works were suggested. The environment of rules and regulations was analyzed from the viewpoint of plant life extension. Two alternatives are suggested to revise the current domestic nuclear acts

  11. Development of procedural requirements for life extension of nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Sang Hoon; Son, Moon Kyu [Korea Association for Nuclear Technology, Taejon (Korea, Republic of); Jeong, Ji Hwan [Baekseok College, Cheonan (Korea, Republic of); Chang, Keun Sun [Sunmoon Univ., Asan (Korea, Republic of); Ham, Chul Hoon [The Catholic University of Korea, Seoul (Korea, Republic of); Chang, Soon Hong [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of)

    2002-03-15

    Technical issues relevant to life extension of NPP were investigated. The GALL report, domestic PSR and periodic inspection rules were reviewed. Technical issues appearing in the safety evaluation reports related to license renewal of Calvert Ciffs 1 and 2 and Qconee 1,2 and 3 NPPs were reviewed. Preliminary study on PSA usage in NPP life extension assessment was performed and further works were suggested. The environment of rules and regulations was analyzed from the viewpoint of plant life extension. Two alternatives are suggested to revise the current domestic nuclear acts.

  12. Development of an aging evaluation and life extension program for the Advanced Test Reactor

    International Nuclear Information System (INIS)

    Dwight, J.E. Jr.

    1988-01-01

    A life extension program has been developed for the US Department of Energy's Advanced Test Reactor. The program is an adaptation of life extension pilot programs at the Surry Unit 1 and Monticello generating stations and is being completed in three phases. In Phase 1, the critical plant components were identified. In Phase 2, existing lifetime analyses and support data for the critical components were reviewed. The results from the review give a preliminary indication that an overall plant lifetime in excess of forty years is feasible. In Phase 3, now in progress, detailed evaluations for component life extensions are being performed. 2 refs., 2 figs., 1 tab

  13. A spatio-temporal extension to the map cube operator

    Science.gov (United States)

    Alzate, Juan C.; Moreno, Francisco J.; Echeverri, Jaime

    2012-09-01

    OLAP (On Line Analytical Processing) is a set of techniques and operators to facilitate the data analysis usually stored in a data warehouse. In this paper, we extend the functionality of an OLAP operator known as Map Cube with the definition and incorporation of a function that allows the formulation of spatio-temporal queries. For example, consider a data warehouse about crimes that includes data about the places where the crimes were committed. Suppose we want to find and visualize the trajectory (a trajectory is just the path that an object follows through space as a function of time) of the crimes of a suspect beginning with his oldest crime and ending with his most recent one. In order to meet this requirement, we extend the Map Cube operator.

  14. Nuclear plant owners move closer to life extension

    International Nuclear Information System (INIS)

    Smith, D.J.

    1991-01-01

    A major debate is now underway about the safety of 40-year-old nuclear power plants. Under the Atomic Energy Act of 1954 a nuclear power plant's license is limited to a maximum of 40 years. Although the act permits the renewal of an operating license, it does not outline any standards or procedures for determining when or under what conditions a plant's operating license should be renewed. This paper reports that the Electric Power Research Institute (EPRI) and the U.S. Department of Energy (DOE) are co-sponsors of a program to demonstrate the license renewal process for two nuclear power plants - Yankee Atomic Electric's 175-MW Yankee PWR plant and Northern States Power's 536-MW Monticello BWR plant. The demonstration is known as the lead plant project. Yankee Atomic has already analyzed the plant's condition and evaluated aging using computer-based expert systems and the plant's operating experience. During these tests Yankee Atomic found embrittlement of the reactor vessel

  15. Nuclear power plant ageing and life extension: Safety aspects

    International Nuclear Information System (INIS)

    Novak, S.; Podest, M.

    1987-01-01

    Experience with large fossil-fired electrical generating units, as well as in all process industries, shows that plants begin to deteriorate with age after approximately 10 years of operation. Similar phenomena will prevail for nuclear plants, and it is reasonable to postulate that their availability will be affected, as will their safety, if appropriate measures are not taken. It is evident that the average age of power reactors in the IAEA's Member States is increasing. By 2000, more than 50 nuclear plants will have been providing electricity for 25 years or longer. Most nuclear power plants have operating lifetimes of between 20 and 40 years. Ageing is defined as a continuing time-dependent degradation of material due to service conditions, including normal operation and transient conditions. It is common experience that over long periods of time, there is a gradual change in the properties of materials. These changes can affect the capability of engineered components, systems, or structures to perform their required function. Not all changes are deleterious, but it is commonly observed that ageing processes normally involve a gradual reduction in performance capability. All materials in a nuclear power plant can suffer from ageing and can partially or totally lose their designed function. Ageing is not only of concern for active components (for which the probability of malfunction increases with time) but also for passive ones, since the safety margin is being reduced towards the lowest allowable level

  16. Life Sciences Implications of Lunar Surface Operations

    Science.gov (United States)

    Chappell, Steven P.; Norcross, Jason R.; Abercromby, Andrew F.; Gernhardt, Michael L.

    2010-01-01

    The purpose of this report is to document preliminary, predicted, life sciences implications of expected operational concepts for lunar surface extravehicular activity (EVA). Algorithms developed through simulation and testing in lunar analog environments were used to predict crew metabolic rates and ground reaction forces experienced during lunar EVA. Subsequently, the total metabolic energy consumption, the daily bone load stimulus, total oxygen needed, and other variables were calculated and provided to Human Research Program and Exploration Systems Mission Directorate stakeholders. To provide context to the modeling, the report includes an overview of some scenarios that have been considered. Concise descriptions of the analog testing and development of the algorithms are also provided. This document may be updated to remain current with evolving lunar or other planetary surface operations, assumptions and concepts, and to provide additional data and analyses collected during the ongoing analog research program.

  17. Extension of mushroom (Agaricus bisporus) shelf life by gamma radiation

    International Nuclear Information System (INIS)

    Lescano, G.

    1994-01-01

    Fresh mushroom sporophores (Agaricus bisporus) were placed in trays and covered with PVC film. Forty-eight of the number of packs were irradiated by a γ-source with a dose of 3 kGy, and the remaining 24 treated as control packs. Both treated and control samples were subsequently stored at 10 ± 2°C and relative humidity of 94 ± 6%. After storage, mushrooms were subjected to quality assessments and taste panel-testing, both raw and when cooked. Irradiated sporophores had an extended shelf-life compared with control samples, with less browning and a delay in cap opening. Desiccation was slowed and stipe elongation reduced so that irradiated mushrooms were still acceptable for consumption 16 days after treatment. Deleterious effects of irradiation at this relatively low level were not observed

  18. Characterization and uniqueness of distinguished self-adjoint extensions of dirac operators

    International Nuclear Information System (INIS)

    Klaus, M.; Wuest, R.; Princeton Univ., NJ

    1979-01-01

    Distinguished self-adjoint extensions of Dirac operators are characterized by Nenciu and constructed by means of cut-off potentials by Wuest. In this paper it is shown that the existence and a more explicit characterization of Nenciu's self-adjoint extensions can be obtained as a consequence from results of the cut-off method, that these extensions are the same as the extensions constructed with cut-off potentials and that they are unique in some sense. (orig.) [de

  19. Rehabilitation of heat exchange equipment a key to power plant life extension and performance improvement

    Energy Technology Data Exchange (ETDEWEB)

    Taveau, F.; Huiban, A.M. [Alstom Power Heat Exchange, 78 - Velizy Villacoublay (France)

    2001-07-01

    With the current evolutions of the energy market and the life extension of the power plants, all the equipment initially supplied need one day or another partial or total rehabilitation. For heat exchange equipment, this includes the condensers, feed water heaters and various heat exchangers. Modernization is in particular necessary when in-service monitoring and periodic inspections show significant deteriorations of the tubes and cooling water leakages leading to forced outages or when tube and tube plate materials are no longer suited to cooling water characteristics or to updated specifications of the secondary system. Feedwater heaters and heat exchangers damaged by erosion/corrosion, vibrations, etc. can be re-designed, manufactured and replaced easily. The operation is more complex on condensers and requires technical surveys, study of alternative solutions and has a more direct impact on the global output of the power plant. That is why our conference will focus on the condenser refurbishment. (author)

  20. Rehabilitation of heat exchange equipment a key to power plant life extension and performance improvement

    International Nuclear Information System (INIS)

    Taveau, F.; Huiban, A.M.

    2001-01-01

    With the current evolutions of the energy market and the life extension of the power plants, all the equipment initially supplied need one day or another partial or total rehabilitation. For heat exchange equipment, this includes the condensers, feed water heaters and various heat exchangers. Modernization is in particular necessary when in-service monitoring and periodic inspections show significant deteriorations of the tubes and cooling water leakages leading to forced outages or when tube and tube plate materials are no longer suited to cooling water characteristics or to updated specifications of the secondary system. Feedwater heaters and heat exchangers damaged by erosion/corrosion, vibrations, etc. can be re-designed, manufactured and replaced easily. The operation is more complex on condensers and requires technical surveys, study of alternative solutions and has a more direct impact on the global output of the power plant. That is why our conference will focus on the condenser refurbishment. (author)

  1. Extension of the GHJW theorem for operator ensembles

    International Nuclear Information System (INIS)

    Choi, Jeong Woon; Hong, Dowon; Chang, Ku-Young; Chi, Dong Pyo; Lee, Soojoon

    2011-01-01

    The Gisin-Hughston-Jozsa-Wootters theorem plays an important role in analyzing various theories about quantum information, quantum communication, and quantum cryptography. It means that any purifications on the extended system which yield indistinguishable state ensembles on their subsystem should have a specific local unitary relation. In this Letter, we show that the local relation is also established even when the indistinguishability of state ensembles is extended to that of operator ensembles.

  2. Advanced condition monitoring techniques and plant life extension studies at EBR-2

    International Nuclear Information System (INIS)

    Singer, R.M.; Gross, K.C.; Perry, W.H.; King, R.W.

    1991-01-01

    Numerous advanced techniques have been evaluated and tested at EBR-2 as part of a plant-life extension program for detection of degradation and other abnormalities in plant systems. Two techniques have been determined to be of considerable assistance in planning for the extended-life operation of EBR-2. The first, a computer-based pattern-recognition system (System State Analyzer or SSA) is used for surveillance of the primary system instrumentation, primary sodium pumps and plant heat balances. This surveillance has indicated that the SSA can detect instrumentation degradation and system performance degradation over varying time intervals and can be used to provide derived signal values to replace signals from failed sensors. The second technique, also a computer-based pattern-recognition system (Sequential Probability Ratio Test or SPRT) is used to validate signals and to detect incipient failures in sensors and components or systems. It is being used on the failed fuel detection system and is experimentally used on the primary coolant pumps. Both techniques are described and experience with their operation presented

  3. Life extension studies and refurbishing of C and I systems of Cirus

    International Nuclear Information System (INIS)

    Awale, P.K.; Sumanth, P.; Roy, Kallol; Bharadwaj, G.

    2005-01-01

    Effects of ageing and component obsolescence of C and I systems of Cirus has been studied, by classifying the C and I systems as (a) those which may affect the operating life of the plant and cannot be repaired/replaced without core-unloading and dismantling the reactor structure. (Group-A), (b) those components which can be repaired/replaced but with considerable difficulty (Group-B) and (c) those which do not affect plant operations and can be easily repaired or replaced (Group-C). Life extension studies included performance assessment, reliability centred evaluation, parametric deviations from base-line characteristics and identification of specific ageing phenomenon and examination of internals. Based on these studies a comprehensive ageing mitigation programme was evolved, necessitating suitable modifications, instrumentation upgradation and component repair/replacement. A major modification job has been to provide an alternate failed fuel detection (FFD) system, since the success rate of the present system, had been decreasing over the years. Further, taking advantage of the available refurbishing outage, a number of instruments and accessories, pertaining to Group-C, were also replaced with state-of-the-art, components. Consideration is also given to requirements of special reactor start-up instrumentation for sensing the initial low neutron count in presence of a high gamma background, during the ensuing reactor start-up with fresh fuel. (author)

  4. Acoustic monitoring to support plant life extension at Sellafield

    International Nuclear Information System (INIS)

    Wit, M. de; Hovhanessian, G.

    2015-01-01

    Tensioned steel wires are widely used in civil engineering structures. They can, however, be vulnerable to corrosion. To reduce the probability of corrosion, sophisticated protection systems are used. Extensive inspection and maintenance regimes are also able to be implemented to confirm that the design strength is available over the lifetime of the wires. These regimes include tests to confirm the condition of post-tensioning cables or stay cables, which can verify the overall performance of the structure. This paper presents a technology to detect and locate wire failures in tensioned cables for use on a wide variety of pre-stressed or post tensioned structures, where they have increased confidence in the structures and reduced maintenance costs. This methodology is the continuous acoustic monitoring technology which uses distinctive acoustic characteristics of wire breaks to separate them from other acoustic activity on the structure. With a combination of instrumentation, data acquisition and data management, it is possible to identify a wire break event, as well as to locate the position and time of the failure. Over 10 years' experience of acoustic monitoring for this application with several independent and blind tests, shows that even in noisy environments the acoustic monitoring method is able to identify and locate wire breaks in fully grouted and partially grouted tendons, stay cables and suspension cables. The design (number of sensors and location) is very important to be sure to cover all wires in the structure. This paper explains the principles of the systems and shows them in practice on a case study of a project in a pre-stressed roof structure of an active tank farm at Sellafield site

  5. The ASME Section 11 Special Working Group On Plant Life Extension

    International Nuclear Information System (INIS)

    Katz, L.R.

    1990-01-01

    The codes and standards applicable to plant life extension have not been identified in the U.S. at this time. However, several initiatives have been taken to establish specific codes and standards pertaining to nuclear plant life extension (PLEX). One of these initiatives, sponsored by ASME, is the Section XI Special Working Group on Plant Life Extension (SWG-PLEX). The SWG-PLEX reports to the ASME Section XI Subcommittee and is responsible for recommending or drafting rules and requirements for modifying Section XI to accommodate age-related degradation to support nuclear plant life extension. This paper summarizes the results and reports the activities of the SWG-PLEX during the 1989/1990 period

  6. Irradiation of refrigerated corned beef for shelf-life extension

    International Nuclear Information System (INIS)

    Sallam, Y.I.; El-Magoli, S.B.M.; Mohamed, H.H.; El-Mongy, T.M.

    2000-01-01

    The development of the microflora of unirradiated and irradiated cowed beef was followed during storage at 5 degree. The total aerobic counts in unirradiated corned beef samples reached x 10 7 cfu/g after 10 days and after 15, 20 , 25 and 30 days of cold storage in irradiated samples at 2, 4, 6, 8 kGy, respectively, accompanied with obvious organoleptic evidence of microbial. Radiation doses up to 8 kGy and cold storage (5 degree) of cowed beef had no effect on the major constituents (moisture, protein and lipids) of these products. During storage, total volatile bases nitrogen (TVBN) and thiobarbituric acid (TBA) values tended to increase; the Ph of corned beef fall down to ca. 5. 7. Increasing the radiation dose level to 6 and 8 kGy, to increase the product shelf-life, affects generally the physical properties of the corned beef samples, and therefore, it could be concluded that the radiation dose level should be chosen to inhibit public health concern bacteria and reduce spoilage organisms, and at the same time preserve the natural properties of the food. At the present study a dose level of 4 kGy was found to be quite enough to reach such requirements for corned beef samples

  7. Extension of Space Food Shelf Life Through Hurdle Approach

    Science.gov (United States)

    Cooper, M. R.; Sirmons, T. A.; Froio-Blumsack, D.; Mohr, L.; Young, M.; Douglas, G. L.

    2018-01-01

    The processed and prepackaged space food system is the main source of crew nutrition, and hence central to astronaut health and performance. Unfortunately, space food quality and nutrition degrade to unacceptable levels in two to three years with current food stabilization technologies. Future exploration missions will require a food system that remains safe, acceptable and nutritious through five years of storage within vehicle resource constraints. The potential of stabilization technologies (alternative storage temperatures, processing, formulation, ingredient source, packaging, and preparation procedures), when combined in hurdle approach, to mitigate quality and nutritional degradation is being assessed. Sixteen representative foods from the International Space Station food system were chosen for production and analysis and will be evaluated initially and at one, three, and five years with potential for analysis at seven years if necessary. Analysis includes changes in color, texture, nutrition, sensory quality, and rehydration ratio when applicable. The food samples will be stored at -20 C, 4 C, and 21 C. Select food samples will also be evaluated at -80 C to determine the impacts of ultra-cold storage after one and five years. Packaging film barrier properties and mechanical integrity will be assessed before and after processing and storage. At the study conclusion, if tested hurdles are adequate, formulation, processing, and storage combinations will be uniquely identified for processed food matrices to achieve a five-year shelf life. This study will provide one of the most comprehensive investigations of long duration food stability ever completed, and the achievement of extended food system stability will have profound impacts to health and performance for spaceflight crews and for relief efforts and military applications on Earth.

  8. The Kepler Science Operations Center Pipeline Framework Extensions

    Science.gov (United States)

    Klaus, Todd C.; Cote, Miles T.; McCauliff, Sean; Girouard, Forrest R.; Wohler, Bill; Allen, Christopher; Chandrasekaran, Hema; Bryson, Stephen T.; Middour, Christopher; Caldwell, Douglas A.; hide

    2010-01-01

    The Kepler Science Operations Center (SOC) is responsible for several aspects of the Kepler Mission, including managing targets, generating on-board data compression tables, monitoring photometer health and status, processing the science data, and exporting the pipeline products to the mission archive. We describe how the generic pipeline framework software developed for Kepler is extended to achieve these goals, including pipeline configurations for processing science data and other support roles, and custom unit of work generators that control how the Kepler data are partitioned and distributed across the computing cluster. We describe the interface between the Java software that manages the retrieval and storage of the data for a given unit of work and the MATLAB algorithms that process these data. The data for each unit of work are packaged into a single file that contains everything needed by the science algorithms, allowing these files to be used to debug and evolve the algorithms offline.

  9. Methods for preservation and extension of shelf life.

    Science.gov (United States)

    Gould, G W

    1996-11-01

    There is potential for spoilage of all foods at some rate or other following harvest, slaughter or manufacture and spoilage may occur at any of the stages between the acquisition of raw materials and the eventual consumption of a food product. These stages include processing, packaging, distribution, retail display, transport, storage and use by the consumer. They are under varying degrees of control that aim to deliver a satisfactory shelf life, to ensure that the finally-consumed product is of high quality and to ensure that it is safe. Spoilage may be caused by a wide range of reactions including some that are essentially physical, some that are chemical, some enzymic and some microbiological. The various forms of microbiological spoilage are preventable to a large degree by a wide range of preservation techniques, most of which act by preventing or inhibiting microbial growth (e.g., chilling, freezing, drying, curing, conserving, vacuum packing, modified atmosphere packing, acidifying, fermenting and adding preservatives). A smaller number of techniques act by inactivating microorganisms (e.g., pasteurization, sterilization and irradiation). Additional techniques restrict the access of microorganisms to products (e.g., aseptic processing and packaging. A major trend is that new and emerging preservation techniques which are coming into use or are under development include more that act by inactivation (e.g., ultrahigh pressure, electroporation, manothermosonication and addition of bacteriolytic enzymes). A further trend is towards the use of procedures that deliver products that are less heavily preserved, have higher quality, are more natural, freer from additives and nutritionally healthier. Less severe preservation procedures are therefore being developed that make use of preservative factors in combinations to deliver (a) less damage to product quality (hurdle technologies); (b) new methods of heating that are better controlled and therefore deliver milder

  10. 77 FR 37839 - Veterans' Group Life Insurance (VGLI) No-Health Period Extension

    Science.gov (United States)

    2012-06-25

    ... DEPARTMENT OF VETERANS AFFAIRS 38 CFR Part 9 RIN 2900-AO24 Veterans' Group Life Insurance (VGLI) No-Health Period Extension AGENCY: Department of Veterans Affairs. ACTION: Proposed rule. SUMMARY... Veterans' Group Life Insurance (VGLI) to extend to 240 days the current 120-day ``no-health'' period during...

  11. Probability of fracture and life extension estimate of the high-flux isotope reactor vessel

    International Nuclear Information System (INIS)

    Chang, S.J.

    1998-01-01

    The state of the vessel steel embrittlement as a result of neutron irradiation can be measured by its increase in ductile-brittle transition temperature (DBTT) for fracture, often denoted by RT NDT for carbon steel. This transition temperature can be calibrated by the drop-weight test and, sometimes, by the Charpy impact test. The life extension for the high-flux isotope reactor (HFIR) vessel is calculated by using the method of fracture mechanics that is incorporated with the effect of the DBTT change. The failure probability of the HFIR vessel is limited as the life of the vessel by the reactor core melt probability of 10 -4 . The operating safety of the reactor is ensured by periodic hydrostatic pressure test (hydrotest). The hydrotest is performed in order to determine a safe vessel static pressure. The fracture probability as a result of the hydrostatic pressure test is calculated and is used to determine the life of the vessel. Failure to perform hydrotest imposes the limit on the life of the vessel. The conventional method of fracture probability calculations such as that used by the NRC-sponsored PRAISE CODE and the FAVOR CODE developed in this Laboratory are based on the Monte Carlo simulation. Heavy computations are required. An alternative method of fracture probability calculation by direct probability integration is developed in this paper. The present approach offers simple and expedient ways to obtain numerical results without losing any generality. In this paper, numerical results on (1) the probability of vessel fracture, (2) the hydrotest time interval, and (3) the hydrotest pressure as a result of the DBTT increase are obtained

  12. Life Span Extension and Neuronal Cell Protection by Drosophila Nicotinamidase*S⃞

    OpenAIRE

    Balan, Vitaly; Miller, Gregory S.; Kaplun, Ludmila; Balan, Karina; Chong, Zhao-Zhong; Li, Faqi; Kaplun, Alexander; VanBerkum, Mark F. A.; Arking, Robert; Freeman, D. Carl; Maiese, Kenneth; Tzivion, Guri

    2008-01-01

    The life span of model organisms can be modulated by environmental conditions that influence cellular metabolism, oxidation, or DNA integrity. The yeast nicotinamidase gene pnc1 was identified as a key transcriptional target and mediator of calorie restriction and stress-induced life span extension. PNC1 is thought to exert its effect on yeast life span by modulating cellular nicotinamide and NAD levels, resulting in increased activity of Sir2 family class III histone ...

  13. Dynamic assessment for life extension of nuclear power plants (NPPs) using system dynamics (SD) method

    International Nuclear Information System (INIS)

    Woo, Tae Ho

    2012-01-01

    It has been proposed to extend the life of nuclear power plants (NPPs) for the economic purpose. Especially, the primary systems in reactor are considered in the thermohydraulic and neutronic aspect, which is related to the safety system. The electric power and the lifespan of components are expressed as economic situation. In addition, political considerations are given by the presidential change and the nuclear non-proliferation characteristics. The dynamical investigation using system dynamics (SD) shows the effective time for the life extension of the NPPs by Monte-Carlo simulations. This non-linear algorithm is incorporated with the feedback loop of the event sequences. The expected event is related to the past event, which affects to the dynamical simulations of lifetime in the NPPs. In the conclusions, the safety guarantee as well as the economic profit in the re-use of long term operated power plants is presented, which is mentioned as the transient time between 2019 and 2021 in this paper. (orig.)

  14. Dynamic assessment for life extension of nuclear power plants (NPPs) using system dynamics (SD) method

    Energy Technology Data Exchange (ETDEWEB)

    Woo, Tae Ho [Seoul National Univ. (Korea, Republic of). Dept. of Nuclear Engineering

    2012-12-15

    It has been proposed to extend the life of nuclear power plants (NPPs) for the economic purpose. Especially, the primary systems in reactor are considered in the thermohydraulic and neutronic aspect, which is related to the safety system. The electric power and the lifespan of components are expressed as economic situation. In addition, political considerations are given by the presidential change and the nuclear non-proliferation characteristics. The dynamical investigation using system dynamics (SD) shows the effective time for the life extension of the NPPs by Monte-Carlo simulations. This non-linear algorithm is incorporated with the feedback loop of the event sequences. The expected event is related to the past event, which affects to the dynamical simulations of lifetime in the NPPs. In the conclusions, the safety guarantee as well as the economic profit in the re-use of long term operated power plants is presented, which is mentioned as the transient time between 2019 and 2021 in this paper. (orig.)

  15. Shelf life extension as solution for environmental impact mitigation: A case study for bakery products.

    Science.gov (United States)

    Bacenetti, Jacopo; Cavaliere, Alessia; Falcone, Giacomo; Giovenzana, Valentina; Banterle, Alessandro; Guidetti, Riccardo

    2018-06-15

    Over the last years, increasing attention has been paid to environmental concerns related to food production and potential solutions to this issue. Among the different strategies being considered to reduce the impact food production has on the environment, only moderate has been paid to the extension of shelf life; a longer shelf life can reduce food losses as well as the economic and environmental impacts of the distribution logistics. The aim of this study is to assess the environmental performance of whole-wheat breadsticks with extended shelf lives and to evaluate whether the shelf-life extension is an effective mitigation solution from an environmental point of view. To this purpose, the life cycle assessment (LCA) approach was applied from a "cradle-to-grave" perspective. Rosmarinic acid was used as an antioxidant to extend the shelf life. To test the robustness of the results and to investigate the influence of the choices made in the modelling phase, a sensitivity and uncertainty analysis were carried out. The achieved results highlighted how, for 10 of the 12 evaluated impact categories, the shelf-life extension is a proper mitigation solution, and its effectiveness depends on the magnitude of product loss reduction that is achieved. The shelf-life extension doesn't allow for the reduction of environmental impact in the categories of human toxicity, cancer effects and freshwater eutrophication. Copyright © 2018 Elsevier B.V. All rights reserved.

  16. 75 FR 63506 - Logging Operations; Extension of the Office of Management and Budget's (OMB) Approval of...

    Science.gov (United States)

    2010-10-15

    ...] Logging Operations; Extension of the Office of Management and Budget's (OMB) Approval of Information... Logging Operations (29 CFR 1910.266). DATES: Comments must be submitted (postmarked, sent, or received) by... following elements: Safe work practices, including the use, operation, and maintenance of tools, machines...

  17. Identification and management of plant aging and life extension issues for a liquid-metal-cooled reactor

    International Nuclear Information System (INIS)

    King, R.W.; Perry, W.H.

    1991-06-01

    Experimental Breeder Reactor 2 (EBR-2) is a pool-type sodium-cooled fast reactor that supports extensive experimental, test and demonstration programs while providing electrical power to the local grid. EBR-2 is a US Department of Energy Facility located at the Idaho National Engineering Laboratory and operated by Argonne National Laboratory (ANL). The current mission of EBR-2 is to serve as the operational prototype for the Integral Fast Reactor demonstration program. This mission and other programs require EBR-2 to operate reliability to a 40-year lifetime, a significant extension beyond the five to ten year life originally planned for the facility. The benefits of operating EBR-2 in the extended-life mode are important for providing long-term operational performance data for a sodium-cooled fast reactor that is not available elsewhere. Identification and preliminary assessment of potential life-limiting factors indicate that, with appropriate consideration given in the design phase, the sodium-cooled plant has potential for a very long operational lifetime. Achievement of a 40-year lifetime with high reliability is important not only for achieving the near-term goals of the EBR-2/IFR programs, but for the advancement of the liquid-metal-cooled reactor concept to the demonstration/commercialization phase. Key features make extended-life operation feasible based on the use of sodium as the primary coolant: low-pressure, high thermal capacity primary system and a low-pressure secondary system requiring no active valves; and limited corrosion of components. 2 refs

  18. Plant life extension program for Indian PHWR power plants - Actual experience and future plans

    International Nuclear Information System (INIS)

    Sharma, M.B.; Ghoshal, B.; Shirolkar, K.M.; Ahmad, S.N.

    2002-01-01

    Full text: The Nuclear Power Corporation of India Limited (NPCIL) is responsible for design, construction and operation for all nuclear power plants in India. Currently, it has fourteen (14) reactor units under operation and another eight units are under various stages of planning and construction. India has adopted Pressurised Heavy Water Reactors (PHWRs) for the initial phase of its nuclear power program. In the earlier PHWRs zircaloy-2 has been used as coolant tube material. Subsequent studies and experience have shown their life to be considerably lower (about 10 full power years) than originally estimated. This meant that reactors at Rajasthan - 1 and 2 Madras - 1 and 2 Narora - 1 and 2 and Kakrapara-1 would require en-masse coolant channel replacement at least once in their lifetime. Subsequent reactors from Kakrapara-2 onwards would not need this en-masse coolant channel replacement as the coolant tube material has been upgraded to Zr 2.5% Nb. En-masse coolant channel replacement and other life extension work have been carried out successfully in Rajasthan Unit-2 (RAPS-2). Madras unit-2 (MAPS-2) has been shutdown since January 2002 and preparatory work for en-masse coolant channel replacement and plant life extension is in progress. This paper discusses in brief the experience of RAPS-2 in carrying out the above jobs as well as the strategies being adopted for MAPS-2. Since the coolant channel replacement work requires a plant outage of about 18 months, this opportunity is used to extend life of existing systems as well as upgradation work. This life extension and upgradation program is based on the results of detailed in service inspection, evaluation of performance of critical equipment, obsolescence and other strategic reasons. This paper discusses in detail some of the major areas of work done, for example introduction of supplementary control room, process control, computer based plant information and event analysis systems, provision of enhanced

  19. Enhanced design, operation and maintenance practices for a longer plant service life

    International Nuclear Information System (INIS)

    Raimondo, E.; Courcoux, A.

    2004-01-01

    Plant service life problems have been under detailed investigation in France and the experience acquired by our company over the past 25 years in the design, construction and maintenance of Pressurized Water Reactors has contributed to develop skills, equipment and capabilities available for efficient plant aging management and component service life extension. The service life of a nuclear power plant is deeply dependant of the provisions made during the design stage, directly linked to good operating conditions and adequate maintenance practices. This paper presents the importance of these three steps (design, operation and maintenance) for plant service life concern. (author)

  20. Rehabilitation and extension of the useful operating life of a high pressure casing of the 75 MW steam turbine of the thermoelectric power plant President Juarez in Rosarito, B.C.; Rehabilitacion y extension de vida util de una carcasa de alta presion de la turbina de vapor de 75 MW de la central termoelectrica Presidente Juarez en Rosarito, B.C.

    Energy Technology Data Exchange (ETDEWEB)

    Mazur C, Zdzislaw; Hernandez R, Alejandro; Luna R, Alberto [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico); Fernandez, Rafael; Nieblas, Enrique [Comision Federal de Electricidad, Rosarito, Baja California (Mexico)

    2004-07-01

    The effective operation of the steam turbines is important to the world industries, but as all machinery, it is necessary to constantly examine and give maintenance to this equipment with the purpose of producing better results. Yet, many steam turbines arrive at an operation period of 30 or 40 years, over their original design capacity. A factor like this, only augments the probabilities of future problems with the casings, such as: thermal fatigue fissures, deformation of the horizontal union and erosion problems in the low pressure housings. The deformation of the casing can affect its capacity to maintain aligned the stationary parts of the turbine, as a consequence, damages can appear in the fixed and rotary components by interference or friction. Also, the water induction can deform the casing to such a degree that, the alignment of the stationary parts is altered until it causes contact and friction between stationary and rotary parts. However, depending on the type and degree of the casing deformation, different methods of rehabilitation can be applied. The core goal is to recover the planarity of the union of the flanges, re-machining the plane of the flange of the upper and lower casing or, alternatively, to carry out a scraping by hand. [Spanish] El funcionamiento eficaz de las turbinas de vapor es importante para las industrias del mundo, pero como toda maquinaria, es necesario examinar y dar mantenimiento constantemente a este equipo con la finalidad de producir mejores resultados. Con todo, muchas turbinas de vapor llegan a un periodo de operacion de 30 o 40 anos, por encima de su capacidad de diseno original. Un factor como este, solo eleva las probabilidades de futuros problemas con las carcasas, tales como: fisuras por fatiga termica, deformacion de la union horizontal y problemas de erosion en las carcasas de baja presion. La deformacion de la carcasa puede afectar su capacidad para mantener alineadas las partes estacionarias de la turbina, como

  1. Reactor vessel assessment and the development of a reactor vessel life extension program for Calvert Cliffs Units One and Two

    International Nuclear Information System (INIS)

    Montgomery, B.; Hijeck, P.J.

    1988-01-01

    A study has been undertaken to provide a general assessment of the life extension capabilities for the Calvert Cliffs Units One and Two reactor pressure vessels. The purpose of the study is to assess the general life extension capabilities for the Calvert Cliffs reactor pressure vessels based upon an extension and variation of the Surry pilot plant life extension study. This assessment provided a detailed reactor vessel surveillance program for plant life extension along with a hierarchy of specific tasks necessary for attaining maximum useful life. The assessment identified a number of critical issues which may impact life attainment and extension along with potential solutions to address these issues to ensure the life extension option is not precluded

  2. An albumin-oligonucleotide assembly for potential combinatorial drug delivery and half-life extension applications

    DEFF Research Database (Denmark)

    Kuhlmann, Matthias; Hamming, Jonas Bohn Refslund; Voldum, Anders

    2017-01-01

    The long blood circulatory property of human serum albumin, due to engagement with the cellular recycling neonatal Fc receptor (FcRn), is an attractive drug half-life extension enabling technology. This work describes a novel site-specific albumin double-stranded (ds) DNA assembly approach, in wh...... technology platform that offers potential combinatorial drug delivery and half-life extension applications.......The long blood circulatory property of human serum albumin, due to engagement with the cellular recycling neonatal Fc receptor (FcRn), is an attractive drug half-life extension enabling technology. This work describes a novel site-specific albumin double-stranded (ds) DNA assembly approach......, in which the 3' or 5' end maleimide-derivatized oligodeoxynucleotides are conjugated to albumin cysteine at position 34 (cys34) and annealed with complementary strands to allow single site-specific protein modification with functionalized ds oligodeoxynucleotides. Electrophoretic gel shift assays...

  3. Factors affecting the longevity of interim ILW stores, monitoring methods and techniques supporting store life extension - 59151

    International Nuclear Information System (INIS)

    Morris, Jenny; Wickham, Stephen; Hicks, Tim; Richardson, Phil; McKinney, James; Morris, Darrell; Brownridge, Melanie; Tearle, Mark

    2012-01-01

    Life-limiting features of stores (i.e. components of a typical Intermediate Level Waste (ILW) store that are vulnerable to failure) can be separated into those related to store design, the continuing operation of the store and equipment and store management. Environmental factors, including temperature, humidity, atmospheric pollutants and radiation fields also affect the longevity of ILW storage buildings and the integrity of the waste packages within the store. The current condition of the store and the causes and rates of any observed deterioration need to be determined to estimate the current operating life of the store and to analyse the costs and benefits associated with life extension. Suitable monitoring techniques and methods for extending the operating life of stores, either by remediation or replacement of identified life-limiting features, have also been assessed. Techniques including visual inspection (directly or by use of CCTV or inspection cells), corrosion coupons, crane monitoring and a wide range of indirect measurement methods can be used to monitor the condition of life-limiting features and the store environment. Methods for extending store life include the application of paint or coatings to retard degradation, use of electro-chemical treatments and repair of the concrete structure or replacement of components. Life-limiting features and environmental factors that affect the longevity of facilities for the interim storage of ILW have been identified through a literature review and Expert Workshop. Monitoring techniques are available for the key life-limiting feature of structural integrity of reinforced concrete, and for the atmospheric or surface concentration of corrosion-accelerating substances. Methods for remediating the reinforced concrete structure or crane rails to increase the expected lifetime of the store are also reviewed. Many of these techniques have previously been used at radioactive waste stores or other nuclear facilities in

  4. Application of structural reliability and risk assessment to life prediction and life extension decision making

    International Nuclear Information System (INIS)

    Meyer, T.A.; Balkey, K.R.; Bishop, B.A.

    1987-01-01

    There can be numerous uncertainties involved in performing component life assessments. In addition, sufficient data may be unavailable to make a useful life prediction. Structural Reliability and Risk Assessment (SRRA) is primarily an analytical methodology or tool that quantifies the impact of uncertainties on the structural life of plant components and can address the lack of data in component life prediction. As a prelude to discussing the technical aspects of SRRA, a brief review of general component life prediction methods is first made so as to better develop an understanding of the role of SRRA in such evaluations. SRRA is then presented as it is applied in component life evaluations with example applications being discussed for both nuclear and non-nuclear components

  5. Waste-to-energy: A review of life cycle assessment and its extension methods.

    Science.gov (United States)

    Zhou, Zhaozhi; Tang, Yuanjun; Chi, Yong; Ni, Mingjiang; Buekens, Alfons

    2018-01-01

    This article proposes a comprehensive review of evaluation tools based on life cycle thinking, as applied to waste-to-energy. Habitually, life cycle assessment is adopted to assess environmental burdens associated with waste-to-energy initiatives. Based on this framework, several extension methods have been developed to focus on specific aspects: Exergetic life cycle assessment for reducing resource depletion, life cycle costing for evaluating its economic burden, and social life cycle assessment for recording its social impacts. Additionally, the environment-energy-economy model integrates both life cycle assessment and life cycle costing methods and judges simultaneously these three features for sustainable waste-to-energy conversion. Life cycle assessment is sufficiently developed on waste-to-energy with concrete data inventory and sensitivity analysis, although the data and model uncertainty are unavoidable. Compared with life cycle assessment, only a few evaluations are conducted to waste-to-energy techniques by using extension methods and its methodology and application need to be further developed. Finally, this article succinctly summarises some recommendations for further research.

  6. 76 FR 3175 - Proposed Extension of Existing Information Collection; Hoist Operators' Physical Fitness

    Science.gov (United States)

    2011-01-19

    ... Extension of Existing Information Collection; Hoist Operators' Physical Fitness AGENCY: Mine Safety and... fitness. DATES: All comments must be received by midnight Eastern Standard Time on March 21, 2011... 56.19057 and 57.19057 require the annual examination and certification of hoist operators' fitness by...

  7. Near-term benefits of life extension planning for nuclear power plants

    International Nuclear Information System (INIS)

    Pickens, T.; Gregor, F.E.

    1988-01-01

    Life Extension of Nuclear Power Plants is now viewed as a realistic alternative to construction of new generating facilities. The subject has been under intensive study since 1984 and two comprehensive pilot plant programs have been completed under EPRI, U.S. Department of Energy and utility sponsorship. A major lesson learned from these studies is that planning for life extension must start early and that many activities must be implemented as early in life as possible to enhance the option for life extension through mitigate and preventive actions. It was also determined that achievement of a 40-year licensed life is by no means guaranteed without substantial effort during the remaining plant life. In examining these recommended actions, it becomes obvious that conscientious implementation also leads to realization of significant short-term benefits in the form of availability improvement, outage reduction, maintenance optimization and longer term planning decisions. In addition to the economic benefits, plant safety is also enhanced by reducing challenges to the safety systems and slowly switching from a corrective maintenance to a preventive maintenance program

  8. Study The Effect Extension Of Fuel Element Life Time In The Core Small Power Reactor

    International Nuclear Information System (INIS)

    Dewita, E.; Rusli, A.; Tuka, V.

    1998-01-01

    Mini power reactor is a low power nuclear reactor which mostly are designed especially to supply energy demand in the remote areas, such as for electricity generation, industries, desalination and district heating.The goal of the operation cycle extension to 3 - 5 years is to maximize the use of the fuel in order to achieve much cheaper energy generated. From the stand point of fuel element, in order to maximize the fuel life time there is a need to see all possible effects of extended life time to the fuel behavior in the core. This study has been carried out in order to obtain the understanding on all influencing factors to the fuel element behaviors at extended operation cycle whose results are expected to be useful as the input to fuel design and fabrication. The study has show that the material selection for fuel and cladding materials are the essential factor in maximizing the fuel life time. Development of cladding and fuel materials has been done, and shown that the new zirconium alloy, zircaloy, having composition of Zr-1,0 Sn-0,27 Fe-0,16 Cr-0,1 Nb-0,01 Ni has higher corrosion resistance and mechanical characteristics better than that of the standard zircaloy-4. Adding the Nb content (0,005-0,2 wt %), decreasing the Sn content until 0,5 wt %, and decreasing the ratio of Fe/Cr from 0,6 to 0,5 can increase resistance to corrosion, while decreasing the ratio of Fe and Cr from 0,3 to 0,7 wt % can increase the mechanical characteristics. To enhance the resistance to nodular corrosion in the BWR system, adding the Nb-Mo, Nb-W and Nb-V at low Sn zircaloy-2 can be done. In improving the fuel element it has been shown that adding niobium (Nb 2 O 5 -0,3 wt %) can enlarge the particle size of fuel hence improving the fuel performance

  9. LEVERAGING AGING MATERIALS DATA TO SUPPORT EXTENSION OF TRANSPORTATION SHIPPING PACKAGES SERVICE LIFE

    Energy Technology Data Exchange (ETDEWEB)

    Dunn, K. [Savannah River National Laboratory; Bellamy, S. [Savannah River National Laboratory; Daugherty, W. [Savannah River National Laboratory; Sindelar, R. [Savannah River National Laboratory; Skidmore, E. [Savannah River National Laboratory

    2013-08-18

    Nuclear material inventories are increasingly being transferred to interim storage locations where they may reside for extended periods of time. Use of a shipping package to store nuclear materials after the transfer has become more common for a variety of reasons. Shipping packages are robust and have a qualified pedigree for performance in normal operation and accident conditions but are only certified over an approved transportation window. The continued use of shipping packages to contain nuclear material during interim storage will result in reduced overall costs and reduced exposure to workers. However, the shipping package materials of construction must maintain integrity as specified by the safety basis of the storage facility throughout the storage period, which is typically well beyond the certified transportation window. In many ways, the certification processes required for interim storage of nuclear materials in shipping packages is similar to life extension programs required for dry cask storage systems for commercial nuclear fuels. The storage of spent nuclear fuel in dry cask storage systems is federally-regulated, and over 1500 individual dry casks have been in successful service up to 20 years in the US. The uncertainty in final disposition will likely require extended storage of this fuel well beyond initial license periods and perhaps multiple re-licenses may be needed. Thus, both the shipping packages and the dry cask storage systems require materials integrity assessments and assurance of continued satisfactory materials performance over times not considered in the original evaluation processes. Test programs for the shipping packages have been established to obtain aging data on materials of construction to demonstrate continued system integrity. The collective data may be coupled with similar data for the dry cask storage systems and used to support extending the service life of shipping packages in both transportation and storage.

  10. Improving environmental management on small-scale farms: perspectives of extension educators and horse farm operators.

    Science.gov (United States)

    Rebecca, Perry-Hill; Linda, Prokopy

    2015-01-01

    Although the number of small-scale farms is increasing in North America and Europe, few studies have been conducted to better understand environmental management in this sector. We investigate this issue by examining environmental management on horse farms from both the perspective of the "expert" extension educator and horse farm operator. We conducted a Delphi survey and follow-up interviews with extension educators in Indiana and Kentucky. We also conducted interviews and farm assessments with 15 horse farm operators in the two states. Our results suggest a disconnection between the perceptions of extension educators and horse farm operators. Extension educators believed that operators of small horse farms are unfamiliar with conservation practices and their environmental benefits and they found it difficult to target outreach to this audience. In the interviews with horse farm operators, we found that the majority were somewhat familiar with conservation practices like rotational grazing, soil testing, heavy use area protection, and manure composting. It was not common, however, for practices to be implemented to generally recognized standards. The horse farm respondents perceived these practices as interrelated parts of a system of farm management that has developed over time to best deal with the physical features of the property, needs of the horses, and available resources. Because conservation practices must be incorporated into a complex farm management system, traditional models of extension (i.e., diffusion of innovations) may be inappropriate for promoting better environmental management on horse farms.

  11. Extensions of the results on powers of -hyponormal and -hyponormal operators

    Directory of Open Access Journals (Sweden)

    Yang Changsen

    2006-01-01

    Full Text Available Firstly, we will show the following extension of the results on powers of -hyponormal and -hyponormal operators: let and be positive integers, if is -hyponormal for , then: (i in case , and hold, (ii in case , and hold. Secondly, we will show an estimation on powers of -hyponormal operators for which implies the best possibility of our results. Lastly, we will show a parallel estimation on powers of -hyponormal operators as follows: let , then the following hold for each positive integer and : (i there exists a log-hyponormal operator such that , (ii there exists a -hyponormal operator such that .

  12. Modeling Operating Modes during Plant Life Cycle

    DEFF Research Database (Denmark)

    Jørgensen, Sten Bay; Lind, Morten

    2012-01-01

    Modelling process plants during normal operation requires a set a basic assumptions to define the desired functionalities which lead to fullfillment of the operational goal(-s) for the plant. However during during start-up and shut down as well as during batch operation an ensemble of interrelated...... modes are required to cover the whole operational window of a processs plant including intermediary operating modes. Development of such an model ensemble for a plant would constitute a systematic way of defining the possible plant operating modes and thus provide a platform for also defining a set...... of candidate control structures. The present contribution focuses on development of a model ensemble for a plant with an illustartive example for a bioreactor. Starting from a functional model a process plant may be conceptually designed and qualitative operating models may be developed to cover the different...

  13. The Ethics of Human Life Extension: The Second Argument from Evolution.

    Science.gov (United States)

    Gyngell, Chris

    2015-12-01

    One argument that is sometimes made against pursuing radical forms of human life extension is that such interventions will make the species less evolvable, which would be morally undesirable. In this article, I discuss the empirical and evaluative claims of this argument. I argue that radical increases in life expectancy could, in principle, reduce the evolutionary potential of human populations through both biological and cultural mechanisms. I further argue that if life extension did reduce the evolvability of the species, this will be undesirable for three reasons: (1) it may increase the species' susceptibility to extinction risks, (2) it may adversely affect institutions and practices that promote well-being, and (3) it may impede moral progress. © The Author 2015. Published by Oxford University Press, on behalf of the Journal of Medicine and Philosophy Inc. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  14. Corrosion issues in the BWR and their mitigation for plant life extension

    International Nuclear Information System (INIS)

    Gordon, B.M.

    1988-01-01

    Corrosion is a major service life limiting mechanism for both pressurized water reactors (PWRs) and boiling water reactors (BWRs). For the BWR, stress corrosion cracking of piping has been the major source of concern where extensive research has led to a number of qualified remedies and currently > 90% of susceptible welds have been mitigated or replaced. Stress corrosion cracking of reactor internals due to the interaction of irradiation, as discussed elsewhere in this conference, is also a possible life limiting phenomenon. This paper focusses on two corrosion phenomena in the BWR which have only recently been identified as impacting the universal goal of BWR life extension: the general corrosion of containment structures and the erosion-corrosion of carbon steel piping

  15. Analyzing the Required Professional Qualification for Agricultural Extension Experts in Operational Level in the Mazandaran Province

    Directory of Open Access Journals (Sweden)

    Amir Ahmadpour

    2015-08-01

    Full Text Available Extension experts who play an active role at the operational level are required to have some indispensable competencies to enable them to provide the rural community with some high quality, ­applicable and important educational programs. Accordingly, the study sought to analyze the components of professional qualifications for agricultural extension experts’ operational level. This study is a descriptive and survey research. The statistical population (Agricultural Extension Experts in Operational Levels was comprised of 290 persons. And the proportional stratified sampling using Krejcie-Morgan Table was applied and 165 subjects were selected. The data collection tool was a researcher-made questionnaire, and its content validity was approved by agricultural extension experts and by using KMO coefficient and Bartlett’s Test giving a reliability of KMO=0.737(. The data analysis results showed that seven extracted factors of (research factors, technical-professional factors, teaching factors, managerial factors, personality factors, communication factors and virtual technology factors explain 63.691% of the total variance of the professional competencies for agriculture extension experts’ operational levels in the province. The  findings indicate that based on scientific methods of research,  assessment of needs, planning and assessment, and in-service training workshops implementation for experts seem to be necessary. Distinctive attention should be practiced by Agriculture Organization to improve agents’ skills in a variety of crops cultivation and in working with software and agricultural applications.

  16. Canadians' support for radical life extension resulting from advances in regenerative medicine.

    Science.gov (United States)

    Dragojlovic, Nick

    2013-04-01

    This paper explores Canadian public perceptions of a hypothetical scenario in which a radical increase in life expectancy results from advances in regenerative medicine. A national sample of 1231 adults completed an online questionnaire on stem cell research and regenerative medicine, including three items relating to the possibility of Canadians' average life expectancy increasing to 120 years by 2050. Overall, Canadians are strongly supportive of the prospect of extended lifespans, with 59% of the sample indicating a desire to live to 120 if scientific advances made it possible, and 47% of respondents agreeing that such increases in life expectancy are possible by 2050. The strongest predictors of support for radical life extension are individuals' general orientation towards science and technology and their evaluation of its plausibility. These results contrast with previous research, which has suggested public ambivalence for biomedical life extension, and point to the need for more research in this area. They suggest, moreover, that efforts to increase public awareness about anti-aging research are likely to increase support for the life-extending consequences of that research program. Copyright © 2013 Elsevier Inc. All rights reserved.

  17. Integration of plant life management in operation and maintenance

    International Nuclear Information System (INIS)

    Hutin, Jean-Pierre

    2002-01-01

    people is an important feature of EDF strategy. Because operating experience often brings evidences of phenomenon which may impact component lifetime, EDF developed a powerful experience feedback organisation. Other key points of lifetime management process are described: Long term repair/replacement strategies Because of the high level of standardization of the EDF fleet, it is absolutely necessary to eliminate the risk of a generic problem which would affect all units at once. For that, EDF must have a very prospective view of all major degradations which could impair component reliability or integrity with appropriate repair/replacement strategies; Collecting relevant data When assessing plant lifetime expectancy, past data about operation and maintenance are needed. Typical examples are the bookkeeping of operating transients which may affect fatigue life of primary system components or the recording of component reliability data; Surveying industrial capacities In the next years, there is a risk for some 'nuclear' companies to go out of business so that EDF could have difficulties in finding appropriate support. To cope with this issue, EDF set up a 'world industrial capacity observatory' which permanently surveys international situation and try to identify 'product/company' pairs which are 'critical' and 'sensitive'. 4 - THE TEN YEAR REVIEW PROCESS. Before the first ten-year outage of a series, a new set of safety references is defined with Safety Authorities. All component/system/structure situations and operating conditions are reviewed, taking in account experience feedback. The results of these reviews are compared with references and a modification and upgrading program is defined. During ten-year outages, modifications are implemented. Extensive inspections and maintenance works are performed, including a set of anticipatory measures. A specific investigation program is also implemented to look for unexpected ageing phenomenon. 5 - THE PLANT LIFE MANAGEMENT

  18. Shelf life extension of whole-wheat breadsticks: Formulation and packaging strategies.

    Science.gov (United States)

    Alamprese, Cristina; Cappa, Carola; Ratti, Simona; Limbo, Sara; Signorelli, Marco; Fessas, Dimitrios; Lucisano, Mara

    2017-09-01

    The aim of this study was the shelf life extension of whole-wheat breadsticks through the addition of a rosemary extract and packaging under nitrogen. Shelf life was studied at four temperatures (20, 27, 35, 48°C) for up to 200 storage days. The minimal changes observed in moisture, water activity and texture of the samples, coupled with the high peroxide values (13-539meqO 2 /kg fat ) measured at the end of storage, and the exponential increase of hexanal concentrations (up to 13-34mg/kg) confirmed that quality decay of whole-wheat breadsticks is mainly associated to lipid oxidation. The kinetic study of oxidation development and the consumer sensory acceptance determined by the survival analysis demonstrated that the rosemary extract addition yields a 42% shelf life extension, higher than that observed using nitrogen in the package (24-29%). The combination of the formulation and packaging strategies gave the best result (83% shelf life extension at 25°C). Copyright © 2017 Elsevier Ltd. All rights reserved.

  19. Technological evaluation for the extension of the operation license to the nuclear power plant of Laguna Verde

    International Nuclear Information System (INIS)

    Arganis J, C. R.; Medina A, A. L.

    2010-01-01

    At the present time one of the tendencies in the nuclear industry is the renovation of operation licenses of the nuclear power plants, with the purpose of prolonging their operation 20 years more than the time settled down in their original license, which is of 30 years for the case of the nuclear power plant of Laguna Verde. This allows the electric power generation for a major period of time and to a relatively low price, giving this way a bigger competitiveness to the power stations of nuclear power. However, to request the license extension of the nuclear power plant requires to get ready the documentation and necessary studies for: to maintain a high level of security, to optimize the operation, maintenance and service life of the structures, systems and components, to maintain an acceptable level of performance, to maximize the recovery of the investment about the service of the nuclear power plant and to preserve the sure conditions for a major operation period at the license time. This paper describes the studies conducted by the Materials Technology Department of the Instituto Nacional de Investigaciones Nucleares (ININ) to substantiate the required documentation for obtaining the extension of operating license of the nuclear power plant. These studies are focused mainly in the reactor pressure vessels of both units, as well as in the deposit of noble metals and the influence of the sludges (crud s) in this deposit. (Author)

  20. Relationship between mitochondrial electron transport chain dysfunction, development, and life extension in Caenorhabditis elegans.

    Directory of Open Access Journals (Sweden)

    Shane L Rea

    2007-10-01

    Full Text Available Prior studies have shown that disruption of mitochondrial electron transport chain (ETC function in the nematode Caenorhabditis elegans can result in life extension. Counter to these findings, many mutations that disrupt ETC function in humans are known to be pathologically life-shortening. In this study, we have undertaken the first formal investigation of the role of partial mitochondrial ETC inhibition and its contribution to the life-extension phenotype of C. elegans. We have developed a novel RNA interference (RNAi dilution strategy to incrementally reduce the expression level of five genes encoding mitochondrial proteins in C. elegans: atp-3, nuo-2, isp-1, cco-1, and frataxin (frh-1. We observed that each RNAi treatment led to marked alterations in multiple ETC components. Using this dilution technique, we observed a consistent, three-phase lifespan response to increasingly greater inhibition by RNAi: at low levels of inhibition, there was no response, then as inhibition increased, lifespan responded by monotonically lengthening. Finally, at the highest levels of RNAi inhibition, lifespan began to shorten. Indirect measurements of whole-animal oxidative stress showed no correlation with life extension. Instead, larval development, fertility, and adult size all became coordinately affected at the same point at which lifespan began to increase. We show that a specific signal, initiated during the L3/L4 larval stage of development, is sufficient for initiating mitochondrial dysfunction-dependent life extension in C. elegans. This stage of development is characterized by the last somatic cell divisions normally undertaken by C. elegans and also by massive mitochondrial DNA expansion. The coordinate effects of mitochondrial dysfunction on several cell cycle-dependent phenotypes, coupled with recent findings directly linking cell cycle progression with mitochondrial activity in C. elegans, lead us to propose that cell cycle checkpoint control

  1. Formal Pseudodifferential Operators in One and Several Variables, Central Extensions, and Integrable Systems

    Directory of Open Access Journals (Sweden)

    Jarnishs Beltran

    2015-01-01

    Full Text Available We review some aspects of the theory of Lie algebras of (twisted and untwisted formal pseudodifferential operators in one and several variables in a general algebraic context. We focus mainly on the construction and classification of nontrivial central extensions. As applications, we construct hierarchies of centrally extended Lie algebras of formal differential operators in one and several variables, Manin triples and hierarchies of nonlinear equations in Lax and zero curvature form.

  2. 77 FR 42004 - Proposed Extension of Existing Information Collection; Main Fan Operation and Inspection in Gassy...

    Science.gov (United States)

    2012-07-17

    ... Extension of Existing Information Collection; Main Fan Operation and Inspection in Gassy Underground Metal...) conditions in underground metal and nonmetal mines are largely controlled by the main mine fans. When accumulations of explosive gases, such as methane, are not swept from the mine by the main fans, they may...

  3. Dysthanasia: Between the Life Extension And the Right to Die With Dignity

    Directory of Open Access Journals (Sweden)

    Alice Pompeu Viana

    2016-12-01

    Full Text Available During the XX century, arise new techniques and drugs that can prolong life. However, an unreasonable extension of the vital process of human being that does not have dignified conditions of living it could result in a slow and painful death. Dysthanasia is characterized as medical treatment whose beneficial potentials for the terminal patient are non-existent or unlikely, they are not able to overcome their maleficent potentials. In the context, the present study aims to demonstrate that to deny the right to die to such patient is violate the right to life, as well as to harm the human dignity.

  4. Inspection and mitigating measures for life extension of nuclear power plant containment structures

    International Nuclear Information System (INIS)

    Meyers, B.L.; Daye, M.A.

    1989-01-01

    The subject of life extension of nuclear power plants has drawn considerable attention during the last few years. Interest in life extension initiated because of both safety and economic reasons. A number of evaluations have been performed. The main thrust of earlier work was directed toward evaluating the factors causing aging, and defining degradation sites, degradation mechanism and failure modes. At present, attention is directed toward establishing the appropriate inspection programs suitable for each of the defined aging sites. Some components and aging sites are already subjected to routine inspection programs such as the surveillance of post-tensioning system and the integrated leak rate test (ILRT) of prestressed concrete and reinforced concrete containments. The aging process affects mechanical, electrical and structural components in all types of containments. This paper addresses the structural components of PWR containments only and presents examples of inspection approaches and describes methods to prevent further degradation of select sites

  5. Evaluation and measures of the life extension of TVO I and TVO II power plant

    International Nuclear Information System (INIS)

    Hakala, J.

    1994-01-01

    A continuous and wide preventive maintenance and renovation is chosen to the life extension strategy at TVO I and II units. This requires extensive concentration on all ageing phenomena on theoretical level as well as on following their development at the power plant. The work related to ageing is partly performed by persons who are responsible for systems and components in the power plant organization, partly by the working groups, which are organized for those purposes. The evaluation of the ageing phenomenon of the power plant systems, of large components and of different technical fields has revealed several needs for measures. Partly those are already performed. However the evaluation has not revealed any such ageing phenomena, which would limit the power plant life time to originally planned 40 years. (orig.)

  6. Electricity-cost savings obtained by means of nuclear plant life extension

    International Nuclear Information System (INIS)

    Forest, L.; Fletcher, T.; DuCharme, A.; Harrison, D.L.

    1987-01-01

    This study examines savings caused by nuclear-plant life extension (NUPLEX) and describes the effects of changes in assumptions on costs and technology using an approach simpler than the large economic-model simulations used in other reports. Under the simplified approach, we estimate savings at the broad national level by comparing projected costs/kWh for the typical NUPLEX plant with those for new coal-fired plants, which seem the most likely alternative in most regions. While ignoring some complications handled by the large, regionally disaggregated econometric models, the approach used in this study has advantages in sensitivity analyses. It reveals relationships between savings and basic assumptions on costs and technology in a more transparent way than in large-model simulations. We find that, absent major technological breakthroughs for present generating options, NUPLEX saves consumers money on their electric bills under most plausible economic scenarios. Using mid-range assumptions, we find that NUPLEX saves consumers a total of about dollar 180 billion spread over the period 2010-50. Under optimistic assumptions, the savings swell to over dollar 900 billion. Under extremely pessimistic assumptions, the savings actually turn negative. This wide range of estimates largely reflects the uncertainty in cost projections. Within plausible limits, higher- or lower-than-expected load growth does not affect the savings estimates. The NUPLEX construction costs stand out as the most critical unknown. If they turn out to be 50% (dollar 500 billion) above the baseline estimate savings would fall by almost 60% (dollar 105 billion). A 50% rise in nuclear fuel costs would drop baseline savings by almost 22%. A 50% increase in nuclear-plant operations-and-maintenance costs, would cut baseline savings by about 36%. These sensitivities highlight the need for continued monitoring of economic developments

  7. Determining the residual lifetime for the main RBMK components in frame of life extension of power units

    International Nuclear Information System (INIS)

    Baldin, V.D.; Petrov, A.A.; Potapov, A.A.

    2005-01-01

    At present time 11 power units of NPPs with RBMK reactors produce annually 140 billion kWh of electricity, which is about half of all electricity generated at Russian NPPs. Commissioned during the period of 1973 to 1990, they have the specified service life of 30 years. The power units have been regularly upgraded during operation to raise their safety and reliability. As the result now they meet modem requirements in terms of safety and their lifetime can considerably exceed their specified service life. The task of the plant life extension becomes more urgent. The main nonreplaceable RBMK reactor components that determine the reactor life, are graphite stack and metal support structures. The aging of these structures is monitored and the structures residual lifetime is predicted in accordance with procedures approved by regulatory authorities. The lead unit among all RBMK power units is Leningrad NPP Unit 1 commissioned in 1973. A complex of activities was performed for this power unit in 2002-2003 to prove the feasibility of its life extension. In terms of defining the residual lifetime of the reactor components, the activities were performed in three major areas: - examination of the state of the reactor structures; - materials studies of irradiated metal and graphite specimens in hot chambers; - performing the calculation and prediction evaluations. The results of examining the metal structures and studying specimens have shown that: 1)The metal and the welds do not have visible defects. The state of protective coatings is largely satisfactory. 2)The ultimate strength and hardness of steel have grown. 3)The brittle fracture transition temperature shift is at the allowable level. 4)The leak-tightness of the metal structures has not been violated. The results of the graphite stack examination have shown that the graphite is at the hardening stage. No tendency for deterioration of mechanical properties has been recorded. According to the results of measuring the

  8. Architecture-Based Operations Analysis: An Extension of Classical Operations Analysis

    National Research Council Canada - National Science Library

    Dickerson, Charles E; Peppers, Samuel R; Cordell, Bryan; Fortunato, Evan M; Brady, Brian T

    2005-01-01

    ...; to include the study of military problems undertaken to provide responsible commanders and staff agencies with a sound scientific basis for decision on actions to improve military operations. (4) A CAPABILITY is the ability to execute a specified course of action (sequence of activities).

  9. Science fiction and human enhancement: radical life-extension in the movie 'In Time' (2011).

    Science.gov (United States)

    Roduit, Johann A R; Eichinger, Tobias; Glannon, Walter

    2018-03-20

    The ethics of human enhancement has been a hotly debated topic in the last 15 years. In this debate, some advocate examining science fiction stories to elucidate the ethical issues regarding the current phenomenon of human enhancement. Stories from science fiction seem well suited to analyze biomedical advances, providing some possible case studies. Of particular interest is the work of screenwriter Andrew Niccol (Gattaca, S1m0ne, In Time, and Good Kill), which often focuses on ethical questions raised by the use of new technologies. Examining the movie In Time (2011), the aim of this paper is to show how science fiction can contribute to the ethical debate of human enhancement. In Time provides an interesting case study to explore what could be some of the consequences of radical life-extension technologies. In this paper, we will show how arguments regarding radical life-extension portrayed in this particular movie differ from what is found in the scientific literature. We will see how In Time gives flesh to arguments defending or rejecting radical life-extension. It articulates feelings of unease, alienation and boredom associated with this possibility. Finally, this article will conclude that science fiction movies in general, and In Time in particular, are a valuable resource for a broad and comprehensive debate about our coming future.

  10. Investigation of the effects of a seismic event on accelerated aged components and benefits in equipment life extension

    International Nuclear Information System (INIS)

    Rygg, D.E.; Epstein, J.L.

    1985-01-01

    Westinghouse has performed extensive testing to determine the effects of aging on a wide range of components. Additionally, Westinghouse has an extensive data base of nuclear plant equipment and components. This paper presents how the data base of information on plant parts can be analyzed, modified, and managed or tracked to reflect in-plant parts life extension based on actual tests on aging. Such an approach can benefit utility programs for parts inventory, plant operations and plant availability, and can also reduce the costs of parts reordering. Rather than weigh the merits of the positions in this debate, this paper presents the results of a component aging program which simulates from five to twenty years of operation followed by a seismic event and identifies the possible incorporation of this data into a plant data base which offers quick reference and provides other relevant information on the component and equipment. The use of this data as part of a well structured maintenance and surveillance program offers an avenue to resolve this debate in a cost effective manner

  11. Life Span Extension and Neuronal Cell Protection by Drosophila Nicotinamidase*S⃞

    Science.gov (United States)

    Balan, Vitaly; Miller, Gregory S.; Kaplun, Ludmila; Balan, Karina; Chong, Zhao-Zhong; Li, Faqi; Kaplun, Alexander; VanBerkum, Mark F. A.; Arking, Robert; Freeman, D. Carl; Maiese, Kenneth; Tzivion, Guri

    2008-01-01

    The life span of model organisms can be modulated by environmental conditions that influence cellular metabolism, oxidation, or DNA integrity. The yeast nicotinamidase gene pnc1 was identified as a key transcriptional target and mediator of calorie restriction and stress-induced life span extension. PNC1 is thought to exert its effect on yeast life span by modulating cellular nicotinamide and NAD levels, resulting in increased activity of Sir2 family class III histone deacetylases. In Caenorhabditis elegans, knockdown of a pnc1 homolog was shown recently to shorten the worm life span, whereas its overexpression increased survival under conditions of oxidative stress. The function and regulation of nicotinamidases in higher organisms has not been determined. Here, we report the identification and biochemical characterization of the Drosophila nicotinamidase, D-NAAM, and demonstrate that its overexpression significantly increases median and maximal fly life span. The life span extension was reversed in Sir2 mutant flies, suggesting Sir2 dependence. Testing for physiological effectors of D-NAAM in Drosophila S2 cells, we identified oxidative stress as a primary regulator, both at the transcription level and protein activity. In contrast to the yeast model, stress factors such as high osmolarity and heat shock, calorie restriction, or inhibitors of TOR and phosphatidylinositol 3-kinase pathways do not appear to regulate D-NAAM in S2 cells. Interestingly, the expression of D-NAAM in human neuronal cells conferred protection from oxidative stress-induced cell death in a sirtuin-dependent manner. Together, our findings establish a life span extending the ability of nicotinamidase in flies and offer a role for nicotinamide-modulating genes in oxidative stress regulated pathways influencing longevity and neuronal cell survival. PMID:18678867

  12. Shelf-life extension of gilthead seabream fillets by osmotic treatment and antimicrobial agents.

    Science.gov (United States)

    Tsironi, T N; Taoukis, P S

    2012-02-01

    The objectives of the study were to evaluate the effect of selected antimicrobial agents on the shelf life of osmotically pretreated gilthead seabream and to establish reliable kinetic equations for shelf-life determination validated in dynamic conditions. Fresh gilthead seabream (Sparus aurata) fillets were osmotically treated with 50% high dextrose equivalent maltodextrin (HDM, DE 47) plus 5% NaCl and 0·5% carvacrol, 0·5% glucono-δ-lactone or 1% Citrox (commercial antimicrobial mix). Untreated and treated slices were aerobically packed and stored isothermally (0-15°C). Microbial growth and quality-related chemical indices were modelled as functions of temperature. Models were validated at dynamic storage conditions. Osmotic pretreatment with the use of antimicrobials led to significant shelf-life extension of fillets, in terms of microbial growth and organoleptic deterioration. The shelf life was 7 days for control samples at 5°C. The osmotic pretreatment with carvacrol, glucono-δ-lactone and Citrox allowed for shelf-life extension by 8, 10 and 5 days at 5°C, respectively. The results of the study show the potential of adding carvacrol, glucono-δ-lactone or Citrox in the osmotic solution to extend the shelf life and improve commercial value of chilled osmotically pretreated fish products. The developed models can be a reliable tool for predicting the shelf life of fresh or minimally processed gilthead seabream fillets in the real chill chain. © 2012 The Authors. Journal of Applied Microbiology © 2012 The Society for Applied Microbiology.

  13. A review of assessment and retrofitting of structures for plant life extension (PLEX) programme

    International Nuclear Information System (INIS)

    Samota, A.; Verma, U.S.P.; Tilak, M.M.

    1994-01-01

    Assessment of the life of existing civil engineering structures for the plant life extension programme has to be made considering various factors such as strength, deterioration, environmental impact particularly with regard to radiation field, etc. which need to be evaluated very carefully. Generally, it is considered that initial design usually caters for a period of around 40 years, though structural failures have been reported even at a much younger stage due to deficiency in design and construction. In the context of nuclear power plant when the initial license is given for a period 30-40 years, it becomes necessary to evaluate the health of the various structures particularly while applying for a license for the extension of plant life. The present paper discuss the various issues connected with the evaluation of the future life of an existing structure in terms of strength and change in its property particularly when the structure is exposed to radiation. The various effects with regard to ageing and radiation exposure and the destructive and non-destructive tests which need to be carried out are discussed in detail. (author). 8 refs., 4 figs

  14. The Impact Of The Mcu Life Extension Solvent On Dwpf Glass Formulation Efforts

    International Nuclear Information System (INIS)

    Peeler, D.; Edwards, T.

    2011-01-01

    As a part of the Actinide Removal Process (ARP)/Modular Caustic Side Solvent Extraction Unit (MCU) Life Extension Project, a next generation solvent (NG-CSSX), a new strip acid, and modified monosodium titanate (mMST) will be deployed. The strip acid will be changed from dilute nitric acid to dilute boric acid (0.01 M). Because of these changes, experimental testing with the next generation solvent and mMST is required to determine the impact of these changes in 512-S operations as well as Chemical Process Cell (CPC), Defense Waste Processing Facility (DWPF) glass formulation activities, and melter operations at DWPF. To support programmatic objectives, the downstream impacts of the boric acid strip effluent (SE) to the glass formulation activities and melter operations are considered in this study. More specifically, the impacts of boric acid additions to the projected SB7b operating windows, potential impacts to frit production temperatures, and the potential impact of boron volatility are evaluated. Although various boric acid molarities have been reported and discussed, the baseline flowsheet used to support this assessment was 0.01M boric acid. The results of the paper study assessment indicate that Frit 418 and Frit 418-7D are robust to the implementation of the 0.01M boric acid SE into the SB7b flowsheet (sludge-only or ARP-added). More specifically, the projected operating windows for the nominal SB7b projections remain essentially constant (i.e., 25-43 or 25-44% waste loading (WL)) regardless of the flowsheet options (sludge-only, ARP added, and/or the presence of the new SE). These results indicate that even if SE is not transferred to the Sludge Receipt and Adjustment Tank (SRAT), there would be no need to add boric acid (from a trim tank) to compositionally compensate for the absence of the boric acid SE in either a sludge-only or ARP-added SB7b flowsheet. With respect to boron volatility, the Measurement Acceptability Region (MAR) assessments also

  15. The life-extension and upgrade program of the Tsing Hua Open-pool Reactor (THOR) and its research prospectives

    International Nuclear Information System (INIS)

    Kai, J.-J.

    1992-01-01

    The Tsing Hua Open-Pool Reactor (THOR) has been operated for thirty years. It is the regulations of the ROCAEC that any reactor shall be decommissioned after forty-year operation since the first fuel loading. Therefore, for extending the lifetime of THOR, it is necessary to have a life-extension program to be approved by the ROCAEC and also completed by the year of 1997. At the same time, for proceeding new research purposes, it is planed to upgrade the thermal power of THOR from 1 Wth up to 3 Wth and hopefully to reach the maximum thermal neutron flux of 5x10 13 n/cm 2 .s and the fast flux close to that order. New research directions involve (a) boron-captured neutron cancer therapy (BNCT) (b) small-angle neutron scattering (SANS). (author)

  16. Quality of life of nurses in the operating room

    Directory of Open Access Journals (Sweden)

    Raquel Murano Alfaia dos Santos

    2009-03-01

    Full Text Available Objective: To evaluate the quality of life of operating room nurses and collect their opinions as to the influence their professional activity exerts on their quality of life. Methods: This was a cross-sectional study carried out on a sample of 24 nurses that work in the operating room of a large private hospital in the city of São Paulo. Two questionnaires were applied; one was designed by the authors of this research project, and the other was the Quality of Life Questionnaire (WHOQOL-BREF. Rresults: As to quality of life, the environment domain obtained the highest score, while the psychological domain obtained the lowest. When asked if their professional activity in the operating room influenced their quality of life, most responded affirmatively. Regarding the justifications offered by the nurses for the influence of their professional activity on their quality of life, 50% mentioned environment-related stress, responsibilities, duties, risk situations, relationships with the multiprofessional team, and the type of work carried out in the operating room. Cconclusions: The psychological domain obtained the lowest score in the nurse quality of life evaluation, pointing out the need to facilitate and/or encourage nurses to seek psychological support. As to the influence of their professional activity on their quality of life, the nurses mentioned stress related to their work environment and professional activities in the operating room. This highlights the importance of managers in this area, paying greater attention to the individual and collective needs of their employees.

  17. Deterioration and shelf-life extension of fish and fishery products by modified atmosphere packaging

    Directory of Open Access Journals (Sweden)

    Payap Masniyom

    2011-04-01

    Full Text Available Fish and fishery products have been recognized as a nutrition source due to their high protein content. Moreover, theycontain considerable amount of unsaturated fatty acids, especially omega-3 fatty acids, which are regarded as preventivecompounds. However, shelf-life of seafood is limited by biochemical and microbiological changes. Modified atmospherepackaging (MAP is widely used for minimally processed fishery products including fresh meat for retarding microbial growthand enzymatic spoilage. CO2, O2, and N2 are most often used in MAP. CO2 enriched atmosphere inhibits the autolyticdegradation of fish muscle during storage. However, high levels of CO2 negatively affect product quality, especially by increasingdrip loss and altering texture. Development of satisfactory methods for shelf-life extension that ensure qualitymaintenance of products with minimum loss has drawn the attention of food technologists. The application of MAP andcombination process in seafood is a promising preservation method to extend the shelf-life of fish and fishery products.

  18. UNIRAM modeling for increased nuclear-plant availability and life extension

    International Nuclear Information System (INIS)

    O'Mara, R.L.

    1988-01-01

    At the start of a nuclear-power plant's design life of 40 years, most parts of the plant are effectively brand new, but some subcomponents have already experienced significant wear and aging effects. In short, the spectrum of where each component is in its life cycle at any time is quite broad, and this makes the prediction of the future availability of the plant a complex issue. Predictive models that account for the differential effects of aging, wear, and functional failure on the plant are desirable as a means to represent this complex behavior. This paper addresses the task of using a computer model to account for the relationships between components, systems, and plant availability, in the context of current and future needs, including eventual life extension. The computer model is based on the Electric Power Research Institute's (EPRI) code, UNIRAM, which has a large and growing user base among utilities

  19. Controlling RPV embrittlement through wet annealing in support of life attainment and life extension decisions

    International Nuclear Information System (INIS)

    Krasikov, E. A.

    2012-01-01

    As a main barrier against radioactivity outlet reactor pressure vessel (RPV) is a key component in terms of Nuclear Power Plant (NPP) safety. Therefore present-day demands in RPV reliability enhance have to be met by all possible actions for RPV in-service embrittlement mitigation. Annealing treatment is known to be the effective measure to restore the RPV metal properties deteriorated by neutron irradiation. Low temperature 'wet' annealing at a maximum coolant temperature which can be obtained using the reactor core or primary circuit pumps, although it cannot be expected to produce complete recovery, is more attractive from the practical point of view especially in cases when the removal of the internals is impossible. As a rule there is no recovery effect up to annealing and irradiation temperature difference of 70 deg. C. It is known, however, that along with radiation embrittlement neutron irradiation may mitigate the radiation damage in metals. Therefore we have tried to test the possibility to use the effect of radiation-induced ductilization in 'wet' annealing technology by means of nuclear heat utilization as heat and neutron irradiation sources at once. In support of the above-mentioned conception the 3-year duration reactor experiment on 15Cr3NiMoV type steel with preliminary irradiation at operating Pressurized Water Reactor (PWR) at 270 deg. C and following extra irradiation (87 h at 330 deg. C) at IR-8 test reactor was fulfilled. In fact, embrittlement was partly suppressed up to value equivalent to 1,5 fold neutron fluence decrease. The degree of recovery in case of radiation enhanced annealing is equal to 27% whereas furnace annealing results in zero effect under existing conditions. Mechanism of the radiation-induced damage mitigation is proposed. It is hoped that 'wet' annealing technology will help provide a better management of the RPV degradation as a factor affecting the lifetime of nuclear power plants which, together with associated

  20. Controlling RPV embrittlement through wet annealing in support of life attainment and life extension decisions

    International Nuclear Information System (INIS)

    Krasikov, E.A.

    2012-01-01

    As a main barrier against radioactivity outlet reactor pressure vessel (RPV) is a key component in terms of Nuclear Power Plant (NPP) safety. Therefore present-day demands in RPV reliability enhance have to be met by all possible actions for RPV in-service embrittlement mitigation. Annealing treatment is known to be the effective measure to restore the RPV metal properties deteriorated by neutron irradiation. Low temperature annealing at a maximum coolant temperature which can be obtained using the reactor core or primary circuit pumps, although it cannot be expected to produce complete recovery, is more attractive from the practical point of view especially in cases when the removal of the internals is impossible. As a rule there is no recovery effect up to annealing and irradiation temperature difference of 70 o C. It is known, however, that along with radiation embrittlement neutron irradiation may mitigate the radiation damage in metals. Therefore we have tried to test the possibility to use the effect of radiation-induced ductilization in annealing technology by means of nuclear heat utilization as heat and neutron irradiation sources at once. In support of the above-mentioned conception the 3-year duration reactor experiment on 15Cr3NiMoV type steel with preliminary irradiation at operating Pressurized Water Reactor (PWR) at 270 o C and following extra irradiation (87 h at 330 o C) at IR-8 test reactor was fulfilled. In fact, embrittlement was partly suppressed up to value equivalent to 1,5 fold neutron fluence decrease. The degree of recovery in case of radiation enhanced annealing is equal to 27% whereas furnace annealing results in zero effect under existing conditions. Mechanism of the radiation-induced damage mitigation is proposed. It is hoped that annealing technology will help provide a better management of the RPV degradation as a factor affecting the lifetime of nuclear power plants which, together with associated management methods, will help

  1. Controlling RPV embrittlement through wet annealing in support of life attainment and life extension decisions

    Energy Technology Data Exchange (ETDEWEB)

    Krasikov, E. A. [National Research Centre Kurchatov Inst., 1, Kurchatov Sq., Moscow, 123182 (Russian Federation)

    2012-07-01

    As a main barrier against radioactivity outlet reactor pressure vessel (RPV) is a key component in terms of Nuclear Power Plant (NPP) safety. Therefore present-day demands in RPV reliability enhance have to be met by all possible actions for RPV in-service embrittlement mitigation. Annealing treatment is known to be the effective measure to restore the RPV metal properties deteriorated by neutron irradiation. Low temperature 'wet' annealing at a maximum coolant temperature which can be obtained using the reactor core or primary circuit pumps, although it cannot be expected to produce complete recovery, is more attractive from the practical point of view especially in cases when the removal of the internals is impossible. As a rule there is no recovery effect up to annealing and irradiation temperature difference of 70 deg. C. It is known, however, that along with radiation embrittlement neutron irradiation may mitigate the radiation damage in metals. Therefore we have tried to test the possibility to use the effect of radiation-induced ductilization in 'wet' annealing technology by means of nuclear heat utilization as heat and neutron irradiation sources at once. In support of the above-mentioned conception the 3-year duration reactor experiment on 15Cr3NiMoV type steel with preliminary irradiation at operating Pressurized Water Reactor (PWR) at 270 deg. C and following extra irradiation (87 h at 330 deg. C) at IR-8 test reactor was fulfilled. In fact, embrittlement was partly suppressed up to value equivalent to 1,5 fold neutron fluence decrease. The degree of recovery in case of radiation enhanced annealing is equal to 27% whereas furnace annealing results in zero effect under existing conditions. Mechanism of the radiation-induced damage mitigation is proposed. It is hoped that 'wet' annealing technology will help provide a better management of the RPV degradation as a factor affecting the lifetime of nuclear power plants which

  2. Life Cycle Costs in Education: Operations & Maintenance Considered.

    Science.gov (United States)

    Moussatche, Helena; Languell-Urquhart, Jennifer; Woodson, Carol

    2000-01-01

    Discusses life cycle cost analysis when deciding on flooring finishes and examines operations and maintenance cost effectiveness relative to hard, resilient, and soft flooring. A chart of evaluated flooring materials' characteristics, appropriate maintenance procedures, and recommended frequency is included. (GR)

  3. 75 FR 15718 - MMS Information Collection Activity: 1010-0086, Sulphur Operations, Extension of a Collection...

    Science.gov (United States)

    2010-03-30

    ... total capital and startup cost components or annual operation, maintenance, and purchase of service... technology acquisition, expected useful life of capital equipment, discount rate(s), and the period over which you incur costs. Capital and startup costs include, among other items, computers and software you...

  4. Concept of a Maneuvering Load Control System and Effect on the Fatigue Life Extension

    Directory of Open Access Journals (Sweden)

    N. Paletta

    Full Text Available Abstract This paper presents a methodology for the conceptual design of a Maneuver Load Control system taking into account the airframe flexibility. The system, when switched on, is able to minimize the bending moment augmentation at a wing station near the wing root during an unsteady longitudinal maneuver. The reduction of the incremental wing bending moment due to maneuvers can lead to benefits such as improved pay-loads/gross weight capabilities and/or extended structural fatigue life. The maneuver is performed by following a desired vertical load factor law with elevators deflections, starting from the trim equilibrium in level flight. The system observes load factor and structural bending through accelerometers and calibrated strain sensors and then sends signals to a computer that symmetrically actuates ailerons for reducing the structural bending and elevators for compensating the perturbation to the longitudinal equilibrium. The major limit of this kind of systems appears when it has to be installed on commercial transport aircraft for reduced OEW or augmented wing aspect-ratio. In this case extensive RAMS analyses and high redundancy of the MLC related sub-systems are required by the Certification Authority. Otherwise the structural design must be performed at system off. Thus the unique actual benefit to be gained from the adoption of a MLC system on a commercial transport is the fatigue life extension. An application to a business aircraft responding to the EASA Certification Specifications, Part 25, has been performed. The aircraft used for the numerical application is considered only as a test case-study. Most of design and analysis considerations are applicable also to other aircraft, such as unmanned or military ones, although some design requirements can be clearly different. The estimation of the fatigue life extension of a structural joint (wing lower skin-stringer, located close to the wing root, has been estimated by showing

  5. It is never too early to start planning for plant life extension

    International Nuclear Information System (INIS)

    Neils, G.H.

    1987-01-01

    This paper outlines some of the reasons why the subject of plant life extension (PLEX) deserves the attention it is receiving and describes some of the work that is currently being conducted in order to make PLEX a reality for U.S. nuclear power plants. One such major effort is a pilot program at the Monticello Nuclear Generating plant. This program, as well as other programs, have already produced some valuable lessons from which other plant owners can benefit. The Monticelle pilot program and the lessons learned thereof are described in some detail in this paper. (Liu)

  6. The influence of gamma irradiation on shelf-life extension of banana

    International Nuclear Information System (INIS)

    Tiravat, K.

    1971-01-01

    Effect of various doses of gamma radiation on shelf-life extension of Hom Tong banana stored at 17 0 C, 20 0 C, and 23 0 C was described. Irradiated banana stored at 20 0 C and 23 0 C did not show any retardation in ripening. Doses from 20-40 Krad appeared to delay ripening of the banana stored at 17 0 C for 3-5 days. No significant difference in weight losses between irradiated and non-irradiated banana was detected during storage

  7. Coal handling system structural analysis for modifications or plant life extension

    International Nuclear Information System (INIS)

    Dufault, A.; Weider, F.; Doyle, P.

    1989-01-01

    One neglected aspect of plant modification or life extension is the extent to which previous projects may have affected the integrity of existing structures. During the course of a project to backfit fire protection facilities to existing coal handling systems, it was found that past modifications had added loads to existing coal handling structures which exceeded the available design margin. This paper describes the studies that discovered the original problem areas, as well as the detailed analysis and design considerations used to repair these structures

  8. Plant life extensions for German nuclear power plants? Controversial discussion on potential electricity price effects

    International Nuclear Information System (INIS)

    Matthes, Felix C.; Hermann, Hauke

    2009-06-01

    The discussions on electricity price effects in case of the plant life extension of German nuclear power plants covers the following topics: (1) Introduction and methodology. (2) Electricity generation in nuclear power plants and electricity price based on an empirical view: electricity generation in nuclear power plants and final consumption price for households and industry in the European Union; electricity generation in nuclear power plants and electricity wholesale price in case of low availability of nuclear power plants in Germany; comparison of electricity wholesale prices in Germany and France. (3) Model considerations in relation to electricity prices and nuclear phase-out. (4) Concluding considerations.

  9. Receiver Operator Characteristic Tools Graphic User Interface Extension for R Commander

    Directory of Open Access Journals (Sweden)

    Daniel Corneliu LEUCUŢA

    2015-12-01

    Full Text Available Background: Receiver Operator Characteristic (ROC curve, is a graphical plot which presents the performance of a binary classifier when the discrimination cutoff is varied. The aim of this work was to create an extension for R Commander that offers a graphical user interface for Receiver Operator Characteristic tools provided by several existing command line accessible packages like pROC and ROCR. Material and Methods: The extension was built and tested with R version 3.2.0 and R Commander 2.1-7. Results: We built an extension called RcmdrPlugin.ROC that we uploaded on the CRAN servers. The extension adds a new menu called ROC, along with two submenus pROC and ROCR that broadly corresponds to commands available to access the functions of these packages. The pROC menu offers several commands: to plot a ROC curve for a dataset or for a logistic regression model, to compare paired and unpaired ROC curves, each providing the following tabs: General (to select the variables for the analysis, and options for switching cases with controls; Smoothing (allowing the user to select different types of smoothing – binominal, density, distributions like normal, lognormal, ...; AUC (to specify the partial area under the curve (AUC options, CI (to select the options of confidence intervals (CI – the level, computing method: DeLong, bootstrap, ...; Plot (for the plotting options. The ROCR dialogue window offers more options in choosing the performance measures for the plot. Conclusion: The RcmdrPlugin.ROC extension helps less advanced users of R accessing ROC tools in a friendly graphical user interface.

  10. Regenerative heat treatments for the extension of the creep life of the superalloy IN-738

    International Nuclear Information System (INIS)

    Stevens, R.A.; Flewitt, P.E.J.

    1979-01-01

    Uniaxial creep tests have been performed on the cast nickel-base superalloy IN-738 at 1023K and 1123K. Microstructural damage occurring during creep has been characterised using transmission electron microscopy of surface and extraction replicas. Considerable coarsening of the γ' precipitates occurs during creep causing a progressive loss of creep strength. Intermediate heat treatment of interrupted specimens regenerates a microstructure similar to the original, and on re-testing significant creep life extensions are observed. These heat treatments do not completely recover the creep life due to the development of grain boundary cavitation. Additional heat treatments were performed under a superimposed hydrostatic pressure of 138 MPa to remove these cavities. (orig.) [de

  11. Modified Atmosphere Systems and Shelf Life Extension of Fish and Fishery Products

    Science.gov (United States)

    DeWitt, Christina A. Mireles; Oliveira, Alexandra C.M.

    2016-01-01

    This review aims at summarizing the findings of studies published over the past 15 years on the application of modified atmosphere (MA) systems for shelf life extension of fish and fishery products. This review highlights the importance of CO2 in the preservation of seafood products, and underscores the benefits of combining MA technology with product storage in the superchilled temperature range. It is generally accepted that MA technology cannot improve product quality and should not be utilized as a substitute for good sanitation and strict temperature control. Benefits derived from application of MA, however, can significantly impact preservation of product quality and it subsequent shelf-life. For this reason, this review is the first of its kind to propose detailed handling and quality guidelines for fresh fish to realize the maximum benefit of MA technology. PMID:28231143

  12. Fatigue life extension techniques for weldments via mechanical surface post treatment

    International Nuclear Information System (INIS)

    Han, Seung Ho; Han, Jeong Woo; Cho, In Ho

    2008-01-01

    In many welded structures, fatigue failures are often occurred at welded joints in which stress concentrations due to the joint geometry are relatively high. Although employing good detail design practices by upgrading the welded detail class enables to improve the fatigue performance, in many cases, the modification of the detail may not be practicable. As an alternative, fatigue life extension techniques, that reduce the severity of the stress concentration at the weld toe region, remove imperfections, and introduce local compressive welding residual stress, can be applied. These techniques are also used as remedial measures to extend the fatigue life of critical welds that have failed prematurely and have been repaired. This paper introduces peening techniques via a pneumatic hammer peening and ultrasonic impact which make it possible to give the weld not only a favorable shape reducing the local stress concentration, but also a beneficial compressive residual stress into material surface

  13. State of technology assessment for life extension of electrical and I and C equipment in nuclear power plants

    International Nuclear Information System (INIS)

    DuCharme, A.R.; Boger, R.M.; Meyer, L.C.; Beament, P.R.

    1988-01-01

    As part of the IEEE Working Group 3.4 on Nuclear Plant Life Extension, an assessment is made of the current state of technology for the life extension of certain classes of electrical and IandC equipment. The classes investigated include motors, cables, emergency diesel generators, penetrations, inverters/chargers, switchgear, and reactor protection systems. The work is focussed on assessment of current or recently completed RandD efforts to resolve issues affecting life extension of the equipment. Aspects discussed include the degree of resolution of these issues, potentially affected standards, and technical aspects requiring further research. 15 refs., 2 tabs

  14. State of technology assessment for life extension of electrical and I and C equipment in nuclear power plants

    International Nuclear Information System (INIS)

    Du Charme, A.R.; Boger, R.M.; Meyer, L.C.; Beament, P.R.

    1988-01-01

    As part of the IEEE Working Group 3.4 on Nuclear Plant Life Extension, an assessment is made of the current state of technology for the life extension of certain classes of electrical and I and C equipment. The classes investigated include motors, cables, emergency diesel generators, penetrations, inverters/charges, switchgear, and reactor protection systems. The work is focussed on assessment of current or recently completed R and D efforts to resolve issues affecting life extension of the equipment. Aspects discussed include the degree of resolution of these issues, potentially affected standards, and technical aspects requiring further research

  15. Analysis of the extension and reduction method of qualified life used in equipment with ambiental qualification

    International Nuclear Information System (INIS)

    Serrano R, M.L. .e -mail: mlserrano@cnsns.gob.mx

    2005-01-01

    With the purpose of reducing costs of acquisition, maintenance, design, hour-man, dose, production, etc. or by changes in the temperature of service, diverse Nuclear Plants (NP) in the world have been carried out extensions and reductions of life of equipment and/or components related with the safety. The used methods are mainly tests type on equipment or component aged quickly, tests type on equipment or component aged naturally and use of the Arrhenius model with monitoring of temperatures in place. The present article carries out an analysis of the Arrhenius model with monitoring of temperatures in place, which is presented in two variants, equation (1) and (2), since it is the but used by the NP with extension purposes and reduction of qualified life. As back information, it was made one search of investigations, applied to diverse fields of the science that try about the reliability of the results provided by Arrhenius for the aging case. The results of the analysis indicate: I) that this method make uncertainties in some intervals of temperature and 2) which of the two variants it provides data more reliable. (Author)

  16. Extension of the TCV Operating Space Towards Higher Elongation and Higher Normalized Current

    International Nuclear Information System (INIS)

    Hofmann, F.; Coda, S.; Lavanchy, P.; Llobet, X.; Marmillod, Ph.; Martin, Y.; Martynov, A.; Mlynar, J.; Moret, J.-M.; Pochelon, A.; Sauter, O.

    2002-01-01

    Recently, an experimental campaign has been launched on TCV with the aim of exploring and extending the limits of the operating space. The vertical position control system has been optimized, with the help of extensive model calculations, in order to allow operation at the lowest possible stability margin. In addition, the growth rate of the axisymmetric instability has been minimized by choosing optimum values for the plasma triangularity and squareness and by operating close to the current limit imposed by the n= 1 external kink mode. These measures have allowed us to reach record values of elongation, κ=2.8, and normalized current, I N =3.6, in a tokamak with standard aspect ratio, R/a=3.5. (author)

  17. Extension of operation of nuclear plants. Synthesis of the qualitative study and of the citizen committee

    International Nuclear Information System (INIS)

    Suteau, Regis

    2014-01-01

    The author comments the results of a survey which was based on 20 interviews with French citizens of different ages, political opinions, geographical locations and also different opinions on nuclear energy. The objective was to obtain their perception and feeling about the issue of nuclear plant service life extension, in order to assess whether they were aware of this issue, could understand it, and what was their opinion about it. Then, these citizens have been gathered three weeks later and met three experts (a representative of a NGO, a member of the ASN and a representative of EDF) who answered their questions and discussed their arguments. These citizens then made statements and recommendations. It appeared that the issue of lifetime extension is hardly known by the public, and is therefore not a topic of public debate but a modality within the important debate about nuclear energy. However, the citizen committee accepts this lifetime extension for different reasons (no known alternatives; economic aspects; safety, nuclear energy is non polluting energy; jobs will be saved) but under some conditions which depend on the opinion on nuclear energy (rather for or rather against). The opinion may change negatively in relationship with some issues: the future of radioactive wastes and dismantled installations, quality and traceability of subcontracted components. This survey is an opportunity to question the general relationship of French people with nuclear energy. In this respect, five profiles are identified: confident, resigned, realistic and reasonable, realistic and anxious, and opponent

  18. Fenobody: A Ferritin-Displayed Nanobody with High Apparent Affinity and Half-Life Extension.

    Science.gov (United States)

    Fan, Kelong; Jiang, Bing; Guan, Zhe; He, Jiuyang; Yang, Dongling; Xie, Ni; Nie, Guohui; Xie, Can; Yan, Xiyun

    2018-04-10

    Nanobodies consist of a single domain variable fragment of a camelid heavy-chain antibody. Nanobodies have potential applications in biomedical fields because of their simple production procedures and low cost. Occasionally, nanobody clones of interest exhibit low affinities for their target antigens, which, together with their short half-life limit bioanalytical or therapeutic applications. Here, we developed a novel platform we named fenobody, in which a nanobody developed against H5N1 virus is displayed on the surface of ferritin in the form of a 24mer. We constructed a fenobody by substituting the fifth helix of ferritin with the nanobody. TEM analysis showed that nanobodies were displayed on the surface of ferritin in the form of 6 × 4 bundles, and that these clustered nanobodies are flexible for antigen binding in spatial structure. Comparing fenobodies with conventional nanobodies currently used revealed that the antigen binding apparent affinity of anti-H5N1 fenobody was dramatically increased (∼360-fold). Crucially, their half-life extension in a murine model was 10-fold longer than anti-H5N1 nanobody. In addition, we found that our fenobodies are highly expressed in Escherichia coli, and are both soluble and thermo-stable nanocages that self-assemble as 24-polymers. In conclusion, our results demonstrate that fenobodies have unique advantages over currently available systems for apparent affinity enhancement and half-life extension of nanobodies. Our fenobody system presents a suitable platform for various large-scale biotechnological processes and should greatly facilitate the application of nanobody technology in these areas.

  19. Planning study and economic feasibility for extended life operation of light water reactor plants

    International Nuclear Information System (INIS)

    Negin, C.A.; Goudarzi, L.A.; Kenworthy, L.U.; Lapides, M.E.

    1980-01-01

    The purpose of this planning study was to perform an assessment of the engineering and economic feasibility of extended life operation of present nuclear power plant units and to recommend future programs that may be warranted by the feasibility assessments. This effort concludes, essentially, that there is sufficient economic motivation for refurbishment to warrant more extensive examination for present plants and to identify possible design modifications that would facilitate extended service life in future plants. The costs of replacing the deterioration-prone equipment in a nuclear power plant appear to represent a small portion of the total plant costs, provided downtime is not excessive. A refurbishment and economic analysis is presented

  20. Plant life extension and ageing mechanisms: an ANSALDO proposal for the application to Kozloduy NPPs

    International Nuclear Information System (INIS)

    Orlandi, S.; Macco, A.; Zanaboni, P.

    1999-01-01

    In the frame of extension of NPP's installations lifetime, ageing management has become a topical subject to obtain the items: - Evaluation of residual life of the plant through the investigation of the residual life of well identified Safety Related Equipment in the as built configuration; - Organization of identified representative equipment per typological Classes (as Piping Systems, Tanks, Valves, Pumps, Electrical Equipment, Pressurized Components) in order to define for each High Level Class a set of elementary families capable to have, within each family, a common ageing mechanism and methodological investigation and potential common on-line monitoring; Application of a consistent methodology for residual life evaluation at each High Level Class (and subsequent elementary family and group if any) in order to assess an integral approach to backfitting and ageing management, taking also into account the economical investment effort required to the utility. In this report, a technical proposal for the application of the ANSALDO standard methodology approach, applied to the re-evaluation of the Kozloduy NPP's (Unit 1 - to 4) is presented. (authors)

  1. Bio-fortification and shelf-life extension of idli batter using curry leaves (Murraya koenigii).

    Science.gov (United States)

    Chelliah, R; Ramakrishnan, S R; Premkumar, D; Antony, U

    2016-06-01

    Among several traditional foods of India, idli is one of the most popular and commonly consumed steamed products. A new method of adding Murraya koenigii (curry leaves) to idli batter as a vehicle for fortification and extension of shelf-life has been developed. Dried curry leaves powder was incorporated with other ingredients like rice and dehusked black gram in different proportions to optimize the most palatable formulation. Rate of fermentation and microbial changes in the batter; nutritional qualities, texture and sensory properties of the prepared product were assessed. Incorporation of curry leaves powder (5 %) in idli batter increased the shelf-life and also increased the flavour, texture and appearance of the idli. The calcium content of the prepared idli was 10 times more than that of the control idli, while dietary fiber content increased by 18.6 %. Anti-microbial activity of the curry leaves in idli batter extended the shelf-life from 2 to 5 days when stored at 30 °C.

  2. "Pull and push back" concepts of longevity and life span extension.

    Science.gov (United States)

    Muradian, Khachik

    2013-12-01

    The negative relation between metabolism and life span is a fundamental gerontological discovery well documented in a variety of ontogenetic and phylogenetic models. But how the long-lived species and populations sustain lower metabolic rate and, in more general terms, what is the efficient way to decline the metabolism? The suggested 'pull and push back' hypothesis assumes that decreased Po2 (hypoxia) and/or increased [Formula: see text] (hypercapnia) may create preconditions for the declined metabolic and aging rates. However, wider implementation of such ideas is compromised because of little advances in modification of the metabolic rate. Artificial atmosphere with controlled [Formula: see text] and [Formula: see text] could be a promising approach because of the minimal external invasions and involvement of the backward and forward loops ensuring physiological self-regulation of the metabolic perturbations. General considerations and existing data indicate that manipulations of [Formula: see text] may be more efficient in life span extension than [Formula: see text]. Thus, maximum life span of mammals positively correlates with the blood [Formula: see text] and HCO3 (-) but not with [Formula: see text]. Yet, proportional decease of the body [Formula: see text] and increase of [Formula: see text] seems the most optimal regime ensuring lower losses of the energy equivalents. Furthermore, especially rewarding results could be expected when such changes are modeled without major external invasions using the animals' inner capacity to consume O2 and generate CO2, as it is typical for the extreme longevity.

  3. Influence of the non-singular stress on the crack extension and fatigue life

    International Nuclear Information System (INIS)

    Cheng, C.Z.; Recho, N.; Niu, Z.R.

    2012-01-01

    Highlights: ► BEM is combined by characteristic analysis to calculate the singular stress field. ► A new method is proposed to evaluate the full stress field at crack tip region. ► Effect of non-singular stress on the propagation direction of the fatigue crack is analyzed. ► The influence of non-singular stress on the fatigue crack life is evaluated. - Abstract: The complete elasticity stress field at a crack tip region can be presented by the sum of the singular stress and several non-singular stress terms according to the Williams asymptotic expansion theory. The non-singular stress has a non-negligible influence on the prediction of the crack extension direction and crack growth rate under the fatigue loading. A novel method combining the boundary element method and the singularity characteristic analysis is proposed here to evaluate the complete stress field at a crack tip region. In this new method, any non-singular stress term in the Williams series expansion can be evaluated according to the computational accuracy requirement. Then, a modified Paris law is introduced to predict the crack propagation under the mixed-mode loading for exploring the influence of the non-singular stress on the fatigue life duration. By comparing with the existed experimental results, the predicted crack fatigue life when the non-singular stress is taken into consideration is more accurate than the predicted ones only considering the singular stress.

  4. Regulatory Approach To and Lessons Learned with Licensing of Service Life Extension at PAKS NPP

    International Nuclear Information System (INIS)

    Petofi, G.

    2012-01-01

    Paks Nuclear Power Plant of Hungary decided to extend the original design lifetime of the plant by 20 years, which expires on December 31, 2012 concerning unit 1. The Hungarian Atomic Energy Authority established the legal environments in order to license the extension using an approach similar to that followed in the United States. The regulation specifies the pre-conditions for the extension, defines the scoping and screening process for the passive and long lived systems, structures and components to be involved in the licensing and the respective methods of treatment and also determines how the active components shall be dealt with during the extended lifetime. The regulatory procedure is a two-step process including the oversight of the preparatory programme of the operator for the extension that started 4 years before the expiry of the lifetime and the licensing process itself, which is currently under way for unit 1 after the submittal of the licensee's application at the end of 2011. The first experiences with the regulatory assessment of the application are available yet and presented in this paper. (author)

  5. Life extension program initiation at Davis-Besse nuclear power station

    International Nuclear Information System (INIS)

    Staudinger, Deborah K.

    1991-01-01

    Davis-Besse is a 900 MW Babcock and Wilcox designed plant located in Northwest Ohio. Effective December 31, 1990, the construction period was recovered making the current license expiration 2007. The economic effects of this extension reduced the depreciation expense for 1990 by $9,790,000 and increased earnings per share by $.04. This positive impact has resulted in an evaluation of pursuing license renewal for Davis-Besse in accordance with the proposed rule on license renewal (10CFR54 'Requirements for renewal of operating licenses for nuclear power plants'). This paper reviews preliminary efforts to evaluate these actions and summarizes strategies planned to ensure continued operation of Davis-Besse remains a viable option for base load generation for Toledo Edison. (author)

  6. Nuclear power plant life management and longer-term operation

    International Nuclear Information System (INIS)

    2006-01-01

    This book, prepared by NEA member country experts, contains data and analyses relevant to nuclear power plant life management and the plants' extended, longer-term operation (LTO). It addresses technical, economic and environmental aspects and provides insights into the benefits and challenges of plant life management and LTO. It will be of interest to policy makers and senior managers in the nuclear power sector and governmental bodies involved in nuclear power programme design and management. The data and information on current trends in nuclear power plant life management will be useful to researchers and analysts working in the field of nuclear energy system assessment. (authors)

  7. Teaching Couple Relationship Education: The Influence on Regional Extension Agents and Family Life Educators

    Directory of Open Access Journals (Sweden)

    Julianne McGill

    2017-10-01

    Full Text Available Couple Relationship Education (CRE programs are a prevention resource used to assist adult individuals, couples, and families reduce relationship distress and improve prosocial behaviors. Regional Extension agents (REAs and other community family life educators (FLEs who teach CRE are involved in a facilitation process that develops relationships and rapport with their participants similar to other helping relationships. To date, no published research has focused on how CRE may affect the REAs/FLEs who provide the programs through community adult education programs. Informed by relational-cultural theory and the ecological systems perspective, the current study focused on assessing change in ten outcomes measuring REAs/FLEs’ (N = 54 individual, couple, and co-parenting functioning and whether that change differed by gender. Results from repeated measure ANCOVAs indicate REAs/FLEs experience gains across several domains of functioning. There were no differences by gender. Implications for REAs/FLEs and suggestions for future research are described.

  8. Data package addendum for COBRA-1A2 life extension to 400 EFPD

    International Nuclear Information System (INIS)

    Hecht, S.L.; Ermi, A.M.

    1994-01-01

    The COBRA-1A experiment was originally designed for irradiations up to 350 effective full power days (EFPD) in EBR-II. Three of the seven B7A test capsules were discharged after 88.6 EFPD (COBRA-1A1; EBR-II designation X516), while the remaining four capsules continued to be irradiated to a goal exposure of 300 EFPD (COBRA-1A2; EBR-II designation X516A). However, it was recently decided that COBRA-1A2 was to remain in the reactor during Run 170, giving and nominal end-of-life (EOL) exposure of 375 EFPD. Since the revised test exposure exceeds the design basis given in supporting analyses, amended analyses are provided herein, giving the technical bases for the extended irradiation. This report describes the safety analysis for the extension of the COBRA-1A2 test (X516A) to 400 effective full power days in FBR-II

  9. Plant life management for long term operation of light water reactors. Principles and guidelines

    International Nuclear Information System (INIS)

    2006-01-01

    The subject of this report was originally suggested by the IAEA Technical Working Group on Life Management of Nuclear Power Plants. It was then approved by the IAEA for work to begin in 2004. The participants in the group felt that it was time to address plant life management and ageing issues from the point of view of long term operation and licence renewal. It is believed that the nuclear power industry will only be able to survive if plant economics are favourable and safety is maintained. Therefore, the issue of ageing and obsolescence has to be addressed from an operational and safety standpoint, but also in the context of plant economics in terms of the cost of electricity production, including initial and recurring capital costs. Use of new technologies, such as advanced in-service inspection and condition based maintenance, should be considered, not only to predict the consequences of ageing and guard against them, but also to monitor equipment performance throughout the lifetime of the plant and to help establish replacement schedules for critical systems, structures and components, and to better estimate the optimum end of the operating licence, which means the end of the nuclear power plant's lifetime. The importance of nuclear power plant life management in facilitating the technical and economic goals of long term operation is presented in this report in terms of the requirement to ensure safe long term supplies of electricity in the most economically competitive way. Safe and reliable operation is discussed in terms of the overall economic benefits when plant life management is implemented. Preconditions for plant life management for long term operation are identified and approaches are reviewed. Plant life management should not be associated only with the extension of the operational lifetime of the nuclear power plant, but with an owner's attitude and a rational approach of the operating company towards running the business economically and safely

  10. Ensemble Kalman Filtering with Residual Nudging: An Extension to State Estimation Problems with Nonlinear Observation Operators

    KAUST Repository

    Luo, Xiaodong

    2014-10-01

    The ensemble Kalman filter (EnKF) is an efficient algorithm for many data assimilation problems. In certain circumstances, however, divergence of the EnKF might be spotted. In previous studies, the authors proposed an observation-space-based strategy, called residual nudging, to improve the stability of the EnKF when dealing with linear observation operators. The main idea behind residual nudging is to monitor and, if necessary, adjust the distances (misfits) between the real observations and the simulated ones of the state estimates, in the hope that by doing so one may be able to obtain better estimation accuracy. In the present study, residual nudging is extended and modified in order to handle nonlinear observation operators. Such extension and modification result in an iterative filtering framework that, under suitable conditions, is able to achieve the objective of residual nudging for data assimilation problems with nonlinear observation operators. The 40-dimensional Lorenz-96 model is used to illustrate the performance of the iterative filter. Numerical results show that, while a normal EnKF may diverge with nonlinear observation operators, the proposed iterative filter remains stable and leads to reasonable estimation accuracy under various experimental settings.

  11. Overview of United States Department of Energy activities to support life extension of nuclear power plants

    International Nuclear Information System (INIS)

    Harrison, D.L.

    1993-01-01

    Today, 109 nuclear power plants provide over 20 percent of the electrical energy generated in the US The operating license of the first of these plants will expire in the year 2000; one-third of the operating licenses will expire by 2010 and the remaining plant licenses are scheduled to expire by 2033. The National Energy Strategy assumes that 70 percent of these plants will continue to operate beyond their current license expiration to assist in ensuring an adequate, diverse, and environmentally acceptable energy supply for economic growth. In order to preserve this energy resource in the US three major tasks must be successfully completed: establishment of regulations, technical standards, and procedures for the preparation and review of a license renewal application; development, verification, and validation of technical criteria and bases for monitoring, refurbishing, and/or replacing plant equipment; and demonstration of the regulatory process. Since 1985, the US Department of Energy (DOE) has been working with the nuclear industry and the US Nuclear Regulatory Commission (NRC) to establish and demonstrate the option to extend the life of nuclear power plants through the renewal of operating licenses. This paper focuses primarily on DOE's Plant Lifetime Improvement (PLIM) Program efforts to develop the technical criteria and bases for effective aging management and lifetime improvement for continued operation of nuclear power plants. This paper describes current projects to resolve generic technical issues in the principal areas of reactor pressure vessel (RPV) integrity, fatigue, and environmental qualification (EQ)

  12. The Effects of Different Aspects of Tourism Services on Travelers' Quality of Life: Model Validation, Refinement, and Extension

    OpenAIRE

    Neal, Janet Davis

    2000-01-01

    The Effects of Different Aspects of Tourism Services on Travelers' Quality of Life: Model Validation, Refinement, and Extension by Janet Davis Neal ABSTRACT Numerous satisfaction studies have been conducted in both tourism and marketing which have examined various aspects of travelers and/or consumers. Quality of life satisfaction studies look beyond the types of satisfaction experiences that endure for only a short time to those that "spill over" into individuals' life domains ...

  13. Shelf life extension of minimally processed ready-to-cook (RTC) cabbage by gamma irradiation

    International Nuclear Information System (INIS)

    Banerjee, Aparajita; Chatterjee, Suchandra; Variyar, Prasad S.; Sharma, Arun

    2016-01-01

    Gamma irradiation (0.5-2.5 kGy) in combination with low temperature (4-15 °C) storage was attempted to increase shelf life of ready-to-cook shredded cabbage wrapped in cling films. A maximum extension in shelf life of 8 days, while retaining the microbial and sensory quality, was obtained with an irradiation dose of 2 kGy and storage at 10 °C. Gamma irradiation also inhibited browning of shredded cabbage at their cut edges resulting in enhanced visual appeal. An increase in total antioxidant activity was observed with respect to DPPH and hydroxyl radical scavenging ability while the nitric oxide radical scavenging activity and ferric reducing property remained unaffected with irradiation. Total phenolic, flavonoid and vitamin C content remained unchanged due to irradiation. No significant migration of additives from cling films into stimulant water was observed up to a radiation dose of 2 kGy thus demonstrating the feasibility of such films for above applications. (author)

  14. Replacement of major nuclear power plant components for service life extension

    International Nuclear Information System (INIS)

    Novak, S.

    1987-01-01

    Problems are discussed associated with replacement of nuclear power plant components with the aim to extend their original scheduled life. The existing foreign experience shows that it is technically feasible to replace practically all basic components for which the necessity of replacement is established. Data is summed up on the replacement of steam generators in US and West German nuclear power plants showing the duration of the job, the total consumption of manhours, the collective dose equivalent and the cost. Attention is also focused on implemented and projected replacements of circulation pipes in nuclear power plants abroad. Based on these figures, the cost is estimated of the replacement of the reactor vessel and the steam generators for WWER-440 nuclear power plants. The conclusion is arrived at that even based on a conservative estimate, the extension by 20 years of the service life of a nuclear power plant is economically more effective than the construction of a new plant. (Z.M.) 2 tabs., 15 refs., 3 figs

  15. Concrete component aging and its significance relative to life extension of nuclear power plants

    International Nuclear Information System (INIS)

    Naus, D.J.

    1986-09-01

    The objectives of this study are to (1) expand upon the work that was initiated in the first two Electric Power Research Institute studies relative to longevity and life extension considerations of safety-related concrete components in light-water reactor (LWR) facilities and (2) provide background that will logically lead to subsequent development of a methodology for assessing and predicting the effects of aging on the performance of concrete-based materials and components. These objectives are consistent with Nuclear Plant Aging Research (NPAR) Program goals: (1) to identify and characterize aging and service wear effects that, if unchecked, could cause degradation of structures, components, and systems and, thereby, impair plant safety; (2) to identify methods of inspection, surveillance, and monitoring or of evaluating residual life of structures, components, and systems that will ensure timely detection of significant aging effects before loss of safety function; and (3) to evaluate the effectiveness of storage, maintenance, repair, and replacement practices in mitigating the rate and extent of degradation caused by aging and service wear

  16. Shelf life extension of minimally processed ready-to-cook (RTC) cabbage by gamma irradiation.

    Science.gov (United States)

    Banerjee, Aparajita; Chatterjee, Suchandra; Variyar, Prasad S; Sharma, Arun

    2016-01-01

    Gamma irradiation (0.5-2.5 kGy) in combination with low temperature (4-15 °C) storage was attempted to increase shelf life of ready-to-cook shredded cabbage wrapped in cling films. A maximum extension in shelf life of 8 days, while retaining the microbial and sensory quality, was obtained with an irradiation dose of 2 kGy and storage at 10 °C. Gamma irradiation also inhibited browning of shredded cabbage at their cut edges resulting in enhanced visual appeal. An increase in total antioxidant activity was observed with respect to DPPH and hydroxyl radical scavenging ability while the nitric oxide radical scavenging activity and ferric reducing property remained unaffected with irradiation. Total phenolic, flavonoid and vitamin C content remained unchanged due to irradiation. No significant migration of additives from cling films into stimulant water was observed up to a radiation dose of 2 kGy thus demonstrating the feasibility of such films for above applications.

  17. Study on shelf life extension of papayas irradiated by /sup 60/Co gamma-rays

    Energy Technology Data Exchange (ETDEWEB)

    Chang, M.S.; Chen, M.D.; Lin, C.T.; Fu, Y.K.

    1984-11-01

    Papayas are one of the main fresh fruits in Taiwan area. Papaya fruits were treated with hot water to pasteurize peels followed by /sup 60/Co gamma-ray irradiation to extend the ripening time. The purpose of synergetic methods is to extend the shelf life of papaya fruits. This experiment was carried out by seven treatments, which were: (1) control group, (2) hot water treatment only, (3) hot water treatment with a 25 krad ..gamma..-irradiation, (4) hot water treatment with a 50 krad ..gamma..-irradiation, (5) hot water treatment with a 75 krad ..gamma..-irradiation, (6) 75 krad ..gamma..-irradiation only, and (7) hot water treatment with a 100 krad ..gamma..-irradiation. The items of observation were: surface yellowing, surface decaying, quality of texture, and length of period lasted after irradiation for 50% marketable papayas. The results of this study showed that a shelf-life extension of six days could be obtained for papayas subjected to hot water (50 to 55/sup 0/C) treatment and a 100 krad irradiation. 3 refs., 2 figs., 2 tabs.

  18. Shelf life extension of whole Norway lobster Nephrops norvegicus using modified atmosphere packaging.

    Science.gov (United States)

    Gornik, Sebastian G; Albalat, Amaya; Theethakaew, Chonchanok; Neil, Douglas M

    2013-11-01

    Once a nuisance by-catch, today the Norway lobster (Nephrops norvegicus) is a valuable UK fisheries commodity. Unfortunately, the species is very susceptible to quality deterioration post harvest as it quickly develops black spots and also spoils rapidly due to bacterial growth. Treatment with chemicals can stop the blackening and carefully monitored cold storage can result in a sensory shelf life of up to 6.5 days. The high susceptibility to spoilage greatly restricts the extent to which N. norvegicus can be distributed to retailers and displayed for sale. The application of modified atmosphere (MA) could be extremely beneficial, allowing the chilled product to stay fresh for a long period of time, thus ensuring higher sales. In the present study, we identified a gas mix for the MA packaging (MAP) of whole N. norvegicus lobster into 200 g retail packs. Our results show that a shelf life extension to 13 days can be achieved when retail packs are stored in MAP at 1 °C. Effectiveness of the MAP was evaluated by using a newly developed QIM for MA-packaged whole N. norvegicus and also by analyzing bacterial plate counts. Changes in the microflora and effects of different storage temperatures on the quality of the MA packs are also presented. The main specific spoilage organism (SSO) of modified atmosphere packaged Norway lobster is Photobacterium phosphoreum. © 2013.

  19. 76 FR 9817 - Standard on Commercial Diving Operations; Extension of the Office of Management and Budget's (OMB...

    Science.gov (United States)

    2011-02-22

    ...] Standard on Commercial Diving Operations; Extension of the Office of Management and Budget's (OMB) Approval... Commercial Diving Operations Standard (29 CFR part 1910, subpart T). DATES: Comments must be submitted... obtaining information (29 U.S.C. 657). Subpart T applies to diving and related support operations conducted...

  20. 75 FR 17162 - Dipping and Coating Operations (Dip Tanks) Standard; Extension of the Office of Management and...

    Science.gov (United States)

    2010-04-05

    ...] Dipping and Coating Operations (Dip Tanks) Standard; Extension of the Office of Management and Budget's... Standard on Dipping and Coating Operations (Dip Tanks) (29 CFR 1910.126(g)(4)). DATES: Comments must be... of efforts in obtaining information (29 U.S.C. 657). The Standard on Dipping and Coating Operations...

  1. 76 FR 67480 - Standard on Commercial Diving Operations; Extension of the Office of Management and Budget's (OMB...

    Science.gov (United States)

    2011-11-01

    ...] Standard on Commercial Diving Operations; Extension of the Office of Management and Budget's (OMB) Approval... Commercial Diving Operations Standard (29 CFR part 1910, subpart T). DATES: Comments must be submitted... existing Standard on Commercial Diving Operations (29 CFR part 1910, Subpart [[Page 67481

  2. Leveraging Available Data to Support Extension of Transportation Packages Service Life

    International Nuclear Information System (INIS)

    Dunn, K.; Abramczyk, G.; Bellamy, S.; Daugherty, W.; Hackney, B.; Hoffman, E.; Skidmore, E.; Stefek, T.

    2012-01-01

    Data obtained from testing shipping package materials have been leveraged to support extending the service life of select shipping packages while in nuclear materials transportation. Increasingly, nuclear material inventories are being transferred to an interim storage location where they will reside for extended periods of time. Use of a shipping package to store nuclear materials in an interim storage location has become more attractive for a variety of reasons. Shipping packages are robust and have a qualified pedigree for their performance in normal operation and accident conditions within the approved shipment period and storing nuclear material within a shipping package results in reduced operations for the storage facility. However, the shipping package materials of construction must maintain a level of integrity as specified by the safety basis of the storage facility through the duration of the storage period, which is typically well beyond the one year transportation window. Test programs have been established to obtain aging data on materials of construction that are the most sensitive/susceptible to aging in certain shipping package designs. The collective data are being used to support extending the service life of shipping packages in both transportation and storage.

  3. Leveraging Available Data to Support Extension of Transportation Packages Service Life

    Energy Technology Data Exchange (ETDEWEB)

    Dunn, K.; Abramczyk, G.; Bellamy, S.; Daugherty, W.; Hackney, B.; Hoffman, E.; Skidmore, E.; Stefek, T.

    2012-06-12

    Data obtained from testing shipping package materials have been leveraged to support extending the service life of select shipping packages while in nuclear materials transportation. Increasingly, nuclear material inventories are being transferred to an interim storage location where they will reside for extended periods of time. Use of a shipping package to store nuclear materials in an interim storage location has become more attractive for a variety of reasons. Shipping packages are robust and have a qualified pedigree for their performance in normal operation and accident conditions within the approved shipment period and storing nuclear material within a shipping package results in reduced operations for the storage facility. However, the shipping package materials of construction must maintain a level of integrity as specified by the safety basis of the storage facility through the duration of the storage period, which is typically well beyond the one year transportation window. Test programs have been established to obtain aging data on materials of construction that are the most sensitive/susceptible to aging in certain shipping package designs. The collective data are being used to support extending the service life of shipping packages in both transportation and storage.

  4. Historical extension of operational NDVI products for livestock insurance in Kenya

    Science.gov (United States)

    Vrieling, Anton; Meroni, Michele; Shee, Apurba; Mude, Andrew G.; Woodard, Joshua; de Bie, C. A. J. M. (Kees); Rembold, Felix

    2014-05-01

    Droughts induce livestock losses that severely affect Kenyan pastoralists. Recent index insurance schemes have the potential of being a viable tool for insuring pastoralists against drought-related risk. Such schemes require as input a forage scarcity (or drought) index that can be reliably updated in near real-time, and that strongly relates to livestock mortality. Generally, a long record (>25 years) of the index is needed to correctly estimate mortality risk and calculate the related insurance premium. Data from current operational satellites used for large-scale vegetation monitoring span over a maximum of 15 years, a time period that is considered insufficient for accurate premium computation. This study examines how operational NDVI datasets compare to, and could be combined with the non-operational recently constructed 30-year GIMMS AVHRR record (1981-2011) to provide a near-real time drought index with a long term archive for the arid lands of Kenya. We compared six freely available, near-real time NDVI products: five from MODIS and one from SPOT-VEGETATION. Prior to comparison, all datasets were averaged in time for the two vegetative seasons in Kenya, and aggregated spatially at the administrative division level at which the insurance is offered. The feasibility of extending the resulting aggregated drought indices back in time was assessed using jackknifed R2 statistics (leave-one-year-out) for the overlapping period 2002-2011. We found that division-specific models were more effective than a global model for linking the division-level temporal variability of the index between NDVI products. Based on our results, good scope exists for historically extending the aggregated drought index, thus providing a longer operational record for insurance purposes. We showed that this extension may have large effects on the calculated insurance premium. Finally, we discuss several possible improvements to the drought index.

  5. Plant life time management for safe long term operation

    International Nuclear Information System (INIS)

    Burket, Danes

    2010-01-01

    The topics discussed include LTO (long-term operation) and licensing procedure in general and specifically for the Dukovany NPP, components of an LTO programme, the PLIM (plant life management) concept for Dukovany and Temelin, the LTO implementation project for Dukovany, LTO strategy, LTO risk study, international verification. The Conclusions include the following items: (i) Technical-economic study of Dukovany NPP LTO demonstrates technical feasibility and economic profitability of Dukovany NPP LTO with perspective for up to 60 years of operation. (ii) Safety part of Program for assurance of Dukovany NPP LTO complies with IAEA SALTO recommendations. (iii) Dukovany NPP LTO programme incorporated IAEA SALTO Peer Review Mission recommendations. (iv) LTO Implementation Project for 2009-2015 was approved with major targets to renew operational permission and prepare NPP for operation up to 60 years. (v) Preparation of Temelin NPP LTO programme has been started. (P.A.)

  6. The creep life of superheater and reheater tubes under varying pressure conditions in operational boilers

    International Nuclear Information System (INIS)

    Mizen, D.C.; Plastow, B.

    1975-01-01

    The first of each manufacturer's 500 MW boilers supplied to the CEGB (Central Electricity Generating Board) have been subjected to an extensive programme of tests for performance optimization and safe operation. Around 250 thermocouples on superheater and reheater tubes have in each case been monitored as part of the exercise. The readings are corrected and used to compute creep rupture damage based on internationally agreed stress rupture data and a simple cumulative damage concept. Comparison of the design creep rupture life and the cumulative life consumed has in several applications been invaluable in influencing operating procedures and arranging tube modifications or replacements, so that loss of generation by creep rupture failure is minimized. (author)

  7. Shelf life extension and sensory evaluation of birch tree sap using chemical preservatives

    Directory of Open Access Journals (Sweden)

    Maciej Bilek

    2016-10-01

    Full Text Available The aim of this study was to assess the stability of the birch tree sap, depending on the addition and concentration of two chemical factors, ie. potassium sorbate and acids: malic, citric or lactic. As in our previous studies we found that the optimal physical parameter to assess the stability of birch sap is turbidity measurement, we used turbidimeter for estimate the effectiveness of shelf life extending. Sensory evaluation was carried out by university sensory panel with 8 skilled people (students and teachers with pre-selection and basic training of sensory methodology. On the other hand artificial perception measurements were realized by electronic nose. Birch tree sap stability without addition of preservatives, both room temperature and refrigerated, is less than three days. The effectiveness of preservation of birch tree sap depends on the concentration of acids. Independently of storage temperature, samples that received stability during the whole one-month storage period, were those with potassium sorbate and three acids in the highest concentrations, ie. malic acid at 0.3%, citric acid at 0.5% and lactic acid at 0.5%. Unfortunately, concentrations of acids, which allow extension of shelf life at least for one month in a room temperature, are characterized by the worst sensory evaluation rating. Thus, they should be corrected by the use of additives for improving the flavor, such as fruit syrups or herbal extracts. On the other hand, additionally storage in a refrigerated conditions allows one-month-stability for the sample with the highest sensory evaluation rating, ie. with the addition of lactic acid at 0.1% and potassium sorbate, which taste not need to be corrected.

  8. Feedback-Assisted Extension of the Tokamak Operating Space to Low Safety Factor

    Science.gov (United States)

    Hanson, J. M.

    2013-10-01

    Recent DIII-D experiments have demonstrated stable operation at very low edge safety factor, q95 instability. The performance of tokamak fusion devices may benefit from increased plasma current, and thus, decreased q. However, disruptive stability limits are commonly encountered in experiments at qedge ~ 2 (limited plasmas) and q95 ~ 2 (diverted plasmas), limiting exploration of low q regimes. In the recent DIII-D experiments, the impact and control of key disruptive instabilities was studied. Locked n = 1 modes with exponential growth times on the order of the wall eddy current decay timescale τw preceded disruptions at q95 = 2 . The instabilities have a poloidal structure that is consistent with VALEN simulations of the RWM mode structure at q95 = 2 . Applying proportional gain magnetic feedback control of the n = 1 mode resulted in stabilized operation with q95 reaching 1.9, and an extension of the discharge lifetime for > 100τw . Loss of feedback control was accompanied by power supply saturation, followed by a rapidly growing n = 1 mode and disruption. Comparisons of the feedback dynamics with VALEN simulations will be presented. The DIII-D results complement and will be discussed alongside recent RFX-MOD demonstrations of RWM control using magnetic feedback in limited tokamak discharges with qedge economical fusion power production. Supported by the US Department of Energy under DE-FG02-04ER54761 and DE-FC02-04ER54698.

  9. Preliminary investigation on the extension of shelf-life of boiled Chub mackerel by irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Loaharanu, P; Prombubesara, C; Songprasertchai, S

    1971-12-31

    The influence of irradiation on the extension of shelf-life of boiled Chub mackerel stored at room temperature (25-30{sup 0}C) was investigated. It was found that boiled Chub mackerel irradiated at 0.1, 0.2, or 0.3 Mrad could be kept with good organoleptic properties at room temperature for 5, 8, and 11 days respectively; while the unirradiated sample could be kept for only 2 days. Boiled Chub mackerel used in this study was found to be heavily contaminated with microorganisms. Irradiation at doses mentioned caused reduction of more than 99% of bacteria. Bacillus and Acinetobacter were found to predominate in the irradiated boiled mackerel. The predominant flora in unirradiated boiled mackerel included Micrococcus, Staphylococcus, Bacillus, Acinetobacter, and Proteus. E. coli was always detected in unirradiated samples and was occasionally detected only in samples irradiated at 0.1 Mrad. Trimethylamine nitrogen (TMA-N) content, total volatile basic nitrogen (TVB-N) content, and total bacterial count (TBC) were used as indices of decomposition of both irradiated and unirradiated samples. TMA-N and TBC were found to be good indices of quality of only unirradiated boiled Chub mackerel, whereas TVB-N was found to be a good index of quality of both irradiated and unirradiated samples.

  10. Shelf-life extension of pear (Pyrus communis L.) by gamma-irradiation

    International Nuclear Information System (INIS)

    Wani, A.M.; Hussain, P.R.; Dar, M.A.; Mir, M.A.

    2007-01-01

    Hard and unripe pear fruit was precooled and subjected to γ-irradiation in the range of 0.1-2.5 kGy. After irradiation fruit was stored under ambient conditions (25±2 degC, RH 70%) and evaluated periodically for firmness, total soluble solids, titratable acidity, chlorophyll, physiological loss in weight, visual colour score, overall acceptability and microbial load. γ-irradiation at 0.1-0.9 kGy did not show any significant effect with respect to shelf-life extension and microbial load. However, irradiation doses of 1.0-1.5 kGy significantly (p≤0.05) delayed ripening and did not spoil for 14 days of storage under ambient conditions. The microbial load was reduced without affecting the physico-chemical and sensory attributes. The irradiation doses of 2.0-2.5 kGy resulted in reduced microbial load and delayed ripening but adversely affected the fruit colour. (author)

  11. Optimal design of accelerated life tests for an extension of the exponential distribution

    International Nuclear Information System (INIS)

    Haghighi, Firoozeh

    2014-01-01

    Accelerated life tests provide information quickly on the lifetime distribution of the products by testing them at higher than usual levels of stress. In this paper, the lifetime of a product at any level of stress is assumed to have an extension of the exponential distribution. This new family has been recently introduced by Nadarajah and Haghighi (2011 [1]); it can be used as an alternative to the gamma, Weibull and exponentiated exponential distributions. The scale parameter of lifetime distribution at constant stress levels is assumed to be a log-linear function of the stress levels and a cumulative exposure model holds. For this model, the maximum likelihood estimates (MLEs) of the parameters, as well as the Fisher information matrix, are derived. The asymptotic variance of the scale parameter at a design stress is adopted as an optimization objective and its expression formula is provided using the maximum likelihood method. A Monte Carlo simulation study is carried out to examine the performance of these methods. The asymptotic confidence intervals for the parameters and hypothesis test for the parameter of interest are constructed

  12. A study on the optimization of plant life extension and decommissioning for the improvement of economy in nuclear power plant

    Energy Technology Data Exchange (ETDEWEB)

    Shin, Jae In; Jung, K. J.; Chung, U. S.; Baik, S. T.; Park, S. K.; Lee, D. G.; Kim, H. R.; Park, B. Y

    2000-01-01

    Fundamentals on the plan, the national policy, the safety securities for the life extension of the nuclear power plant was established from the domestic/abroad documents and case studies in relation with the life extension and decommissioning of the nuclear power plant. Concerning the decommissioning of the nuclear power plant, the management according to decommissioning stages was analyzed by the investigation of the domestic/abroad standard of the decommissioning (decontamination. dismantling) technology and regulation. Moreover, the study on the cost estimation method has been carried out for the decommissioning of the nuclear power plant. (author)

  13. Development of stress corrosion techniques for structural integrity evaluation and life extension of PWR facilities

    International Nuclear Information System (INIS)

    Moreira, Pedro A.L.D.L. Pinheiro; Vilela, Jeferson J.; Lorenzo, Roberto F. Di; Lopes, Jadir A.M.

    2000-01-01

    The stress corrosion is a mechanism of degradation present in the nuclear plants. To extend the life of the plants components, this corrosion type it should be known. An evaluation for the implantation of methodologies of stress corrosion study in CDTN/CNEN, shows that the technique of slow deformation can be used in the evaluation of integrity structural nuclear power stations. This technique consists of straining a sample slowly, usually, in strain rate between 10 -4 and 10- 8 s -1 and in conditions that simulate the reactivity of the metal in environment (pressure, temperature, chemical composition of the water and etc) similar to the found at the nuclear power power stations. This simulation allows evaluating susceptibility the stress corrosion of components mechanical and structure that operate in central nuclear. (author)

  14. What reassurances do the community need regarding life extension? Evidence from studies of community attitudes and an analysis of film portrayals.

    Science.gov (United States)

    Underwood, Mair

    2014-04-01

    It is increasingly recognized that community attitudes impact on the research trajectory, entry, and reception of new biotechnologies. Yet biogerontologists have generally been dismissive of public concerns about life extension. There is some evidence that biogerontological research agendas have not been communicated effectively, with studies finding that most community members have little or no knowledge of life extension research. In the absence of knowledge, community members' attitudes may well be shaped by issues raised in popular portrayals of life extension (e.g., in movies). To investigate how popular portrayals of life extension may influence community attitudes, I conducted an analysis of 19 films depicting human life extension across different genres. I focussed on how the pursuit of life extension was depicted, how life extension was achieved, the levels of interest in life extension shown by characters in the films, and the experiences of extended life depicted both at an individual and societal level. This paper compares the results of this analysis with the literature on community attitudes to life extension and makes recommendations about the issues in which the public may require reassurance if they are to support and accept life extension technologies.

  15. Operation time extension for power units of the first generation NPP and the liability for potential damage

    International Nuclear Information System (INIS)

    Kovalevich, O.M.

    2000-01-01

    The problem on the operation time extension for the six operating NPP first generation power units is discussed. However it is not advisable to improve the safety of these power units up to the acceptable level, therefore there arises the contradiction between the operation time extension of these power units and potential damage for the population. The possibility of having the increased civilian-legal responsibility for potential harm and losses in case of an accident is proposed to be considered as a compensating measure. The measures for realization of this civilian-legal responsibility are described [ru

  16. Loss of life of induction motors under various operating anomalies

    International Nuclear Information System (INIS)

    Chugh, Tarun; Varde, P.V.

    2016-01-01

    Reliability studies conducted to study the various failure modes of all induction motors shows that one of failure modes i.e. winding failure is quite prevalent and accounts for high percentage of failures of motors. Thus, there is a pivotal need to understand the theory of winding failure and know how it can be prognosticated based on the input parameters, current operating environment and maintenance history of a motor. This paper defines loss of motor life as the loss of stator winding insulation life due to thermal and environmental stresses. From the thermal point of view, the stator winding insulation is the weakest part of a squirrel cage induction motor, and equations are developed to estimate the insulation Iife and hence the motor life. In this regard, an integrated model consisting of an electrical model, thermal model and insulation ageing model is developed to evaluate the effect of various anomalies/stressors e.g. overvoltage and voltage unbalance on the life of a motor. This model is used to quantify the loss of life of a 2.3 kW, 415 V induction motor. The electrical model is developed by conducting Open Circuit and Blocked Rotor Test on the motor and thereby deriving its equivalent circuit. Using the model, the stator winding losses are calculated and given as an input to the thermal model to find the temperature rise in the stator winding. The steady state temperature of the stator winding is given as an input to the insulation aging model which predicts the loss of life. This work presents a simple technique for calculating thermal parameters based on motor testing rather than from motor design data. The insulation ageing model is developed based on Eyring Equation considering temperature and humidity as stressors. (author)

  17. An application of modulated poisson processes to aging evaluation for the extension of qualified life of nuclear power plant equipment

    International Nuclear Information System (INIS)

    Saldanha, Pedro Luiz da Cruz

    2003-03-01

    The modulated power law process (MPLP) is a three-parameter stochastic point process model that can be used to describe the failures time of reparable systems. While the power law process implies that a system is exactly on the same condition just after a repair as just before a failure, the MPLP allows for the system to be affected both by failure and repair. For this reason this model is adequate for evaluating the recurrent events that incorporate both time trends and effects of past events such as the renewal type behavior. The purpose of this study is to evaluate the MPLP as a model for the rate of occurrence of failures of a repairable system to decide for an extension of qualified life in the context of licence renewal of a nuclear power plant. Standard statistical techniques, such as the maximum likelihood and linear regression models, are applied to estimate parameters of the MPLP. As a conclusion of the study, the MPLP is adequate for modelling rate of occurrence of failures that are time dependent, and can be used where the aging mechanisms are present in the operation of repairable systems. (author)

  18. Microbial inactivation and shelf life extension of Korean traditional prepared meals by irradiation

    International Nuclear Information System (INIS)

    Jo, C.

    2009-01-01

    The effects of gamma irradiation on microbial inactivation and shelf life extension of Korean traditional prepared meals, including bulgogi and its sauce, marinated beef rib and Kimbab, were investigated. Raw vegetables, fruits and soy sauce used for making bulgogi sauce were highly contaminated and most of them with Bacillus spp. and coliform bacteria at the initial stage. Irradiation at 10 kGy eliminated coliforms in the bulgogi sauce and no growth was found during the 4 weeks of storage at 20 deg. C. The sensory evaluation of bulgogi and its sauce showed that the colour of irradiated samples was better than that of non-irradiated controls or heat treated samples. The total bacteria count and coliform of marinated beef ribs were 5.68 and 3.68 in CFU/g, respectively. The effect of irradiation on the growth of the four test microorganisms inoculated (about 106-107 CFU/g) into the marinated beef ribs were dose dependent (a higher dose produced a greater reduction). All the four pathogens inoculated on marinated beef ribs were eliminated at 4 kGy. The D 10 values of Bacillus cereus, Staphylococcus aureus, Salmonella typhimurium and Escherichia coli on inoculated marinated beef ribs were 0.66 ± 0.01, 0.59 ± 0.05, 0.64 ± 0.02 and 0.54 ± 0.01 kGy, respectively. Of these, E. coli was the most radiation sensitive in the raw marinated beef ribs. The number of the four pathogens inoculated into Kimbab decreased by 2-3 ln CFU/g for every 1 kGy increment and were not detected after 3 kGy. The D 10 values of pathogens inoculated into the Kimbab were in the range 0.31-0.44 kGy. This study indicated that irradiation is effective in ensuring the safety of Korean traditional prepared meals, including bulgogi sauce, bulgogi, marinated beef ribs and Kimbab with acceptable sensory quality. For Kimchijumeokbab, viable cells of the four pathogens inoculated increased slightly after abusive storage condition (20 deg. C), although under commercial condition (4 deg. C), and after 2

  19. Model of environmental life cycle assessment for coal mining operations

    Energy Technology Data Exchange (ETDEWEB)

    Burchart-Korol, Dorota, E-mail: dburchart@gig.eu; Fugiel, Agata, E-mail: afugiel@gig.eu; Czaplicka-Kolarz, Krystyna, E-mail: kczaplicka@gig.eu; Turek, Marian, E-mail: mturek@gig.eu

    2016-08-15

    This paper presents a novel approach to environmental assessment of coal mining operations, which enables assessment of the factors that are both directly and indirectly affecting the environment and are associated with the production of raw materials and energy used in processes. The primary novelty of the paper is the development of a computational environmental life cycle assessment (LCA) model for coal mining operations and the application of the model for coal mining operations in Poland. The LCA model enables the assessment of environmental indicators for all identified unit processes in hard coal mines with the life cycle approach. The proposed model enables the assessment of greenhouse gas emissions (GHGs) based on the IPCC method and the assessment of damage categories, such as human health, ecosystems and resources based on the ReCiPe method. The model enables the assessment of GHGs for hard coal mining operations in three time frames: 20, 100 and 500 years. The model was used to evaluate the coal mines in Poland. It was demonstrated that the largest environmental impacts in damage categories were associated with the use of fossil fuels, methane emissions and the use of electricity, processing of wastes, heat, and steel supports. It was concluded that an environmental assessment of coal mining operations, apart from direct influence from processing waste, methane emissions and drainage water, should include the use of electricity, heat and steel, particularly for steel supports. Because the model allows the comparison of environmental impact assessment for various unit processes, it can be used for all hard coal mines, not only in Poland but also in the world. This development is an important step forward in the study of the impacts of fossil fuels on the environment with the potential to mitigate the impact of the coal industry on the environment. - Highlights: • A computational LCA model for assessment of coal mining operations • Identification of

  20. Model of environmental life cycle assessment for coal mining operations

    International Nuclear Information System (INIS)

    Burchart-Korol, Dorota; Fugiel, Agata; Czaplicka-Kolarz, Krystyna; Turek, Marian

    2016-01-01

    This paper presents a novel approach to environmental assessment of coal mining operations, which enables assessment of the factors that are both directly and indirectly affecting the environment and are associated with the production of raw materials and energy used in processes. The primary novelty of the paper is the development of a computational environmental life cycle assessment (LCA) model for coal mining operations and the application of the model for coal mining operations in Poland. The LCA model enables the assessment of environmental indicators for all identified unit processes in hard coal mines with the life cycle approach. The proposed model enables the assessment of greenhouse gas emissions (GHGs) based on the IPCC method and the assessment of damage categories, such as human health, ecosystems and resources based on the ReCiPe method. The model enables the assessment of GHGs for hard coal mining operations in three time frames: 20, 100 and 500 years. The model was used to evaluate the coal mines in Poland. It was demonstrated that the largest environmental impacts in damage categories were associated with the use of fossil fuels, methane emissions and the use of electricity, processing of wastes, heat, and steel supports. It was concluded that an environmental assessment of coal mining operations, apart from direct influence from processing waste, methane emissions and drainage water, should include the use of electricity, heat and steel, particularly for steel supports. Because the model allows the comparison of environmental impact assessment for various unit processes, it can be used for all hard coal mines, not only in Poland but also in the world. This development is an important step forward in the study of the impacts of fossil fuels on the environment with the potential to mitigate the impact of the coal industry on the environment. - Highlights: • A computational LCA model for assessment of coal mining operations • Identification of

  1. Statistical and Probabilistic Extensions to Ground Operations' Discrete Event Simulation Modeling

    Science.gov (United States)

    Trocine, Linda; Cummings, Nicholas H.; Bazzana, Ashley M.; Rychlik, Nathan; LeCroy, Kenneth L.; Cates, Grant R.

    2010-01-01

    NASA's human exploration initiatives will invest in technologies, public/private partnerships, and infrastructure, paving the way for the expansion of human civilization into the solar system and beyond. As it is has been for the past half century, the Kennedy Space Center will be the embarkation point for humankind's journey into the cosmos. Functioning as a next generation space launch complex, Kennedy's launch pads, integration facilities, processing areas, launch and recovery ranges will bustle with the activities of the world's space transportation providers. In developing this complex, KSC teams work through the potential operational scenarios: conducting trade studies, planning and budgeting for expensive and limited resources, and simulating alternative operational schemes. Numerous tools, among them discrete event simulation (DES), were matured during the Constellation Program to conduct such analyses with the purpose of optimizing the launch complex for maximum efficiency, safety, and flexibility while minimizing life cycle costs. Discrete event simulation is a computer-based modeling technique for complex and dynamic systems where the state of the system changes at discrete points in time and whose inputs may include random variables. DES is used to assess timelines and throughput, and to support operability studies and contingency analyses. It is applicable to any space launch campaign and informs decision-makers of the effects of varying numbers of expensive resources and the impact of off nominal scenarios on measures of performance. In order to develop representative DES models, methods were adopted, exploited, or created to extend traditional uses of DES. The Delphi method was adopted and utilized for task duration estimation. DES software was exploited for probabilistic event variation. A roll-up process was used, which was developed to reuse models and model elements in other less - detailed models. The DES team continues to innovate and expand

  2. Cybernetic principles of aging and rejuvenation: the buffering- challenging strategy for life extension.

    Science.gov (United States)

    Heylighen, Francis

    2014-01-01

    Aging is analyzed as the spontaneous loss of adaptivity and increase in fragility that characterizes dynamic systems. Cybernetics defines the general regulatory mechanisms that a system can use to prevent or repair the damage produced by disturbances. According to the law of requisite variety, disturbances can be held in check by maximizing buffering capacity, range of compensatory actions, and knowledge about which action to apply to which disturbance. This suggests a general strategy for rejuvenating the organism by increasing its capabilities of adaptation. Buffering can be optimized by providing sufficient rest together with plenty of nutrients: amino acids, antioxidants, methyl donors, vitamins, minerals, etc. Knowledge and the range of action can be extended by subjecting the organism to an as large as possible variety of challenges. These challenges are ideally brief so as not to deplete resources and produce irreversible damage. However, they should be sufficiently intense and unpredictable to induce an overshoot in the mobilization of resources for damage repair, and to stimulate the organism to build stronger capabilities for tackling future challenges. This allows them to override the trade-offs and limitations that evolution has built into the organism's repair processes in order to conserve potentially scarce resources. Such acute, "hormetic" stressors strengthen the organism in part via the "order from noise" mechanism that destroys dysfunctional structures by subjecting them to strong, random variations. They include heat and cold, physical exertion, exposure, stretching, vibration, fasting, food toxins, micro-organisms, environmental enrichment and psychological challenges. The proposed buffering-challenging strategy may be able to extend life indefinitely, by forcing a periodic rebuilding and extension of capabilities, while using the Internet as an endless source of new knowledge about how to deal with disturbances.

  3. Tor1/Sch9-regulated carbon source substitution is as effective as calorie restriction in life span extension.

    Directory of Open Access Journals (Sweden)

    Min Wei

    2009-05-01

    Full Text Available The effect of calorie restriction (CR on life span extension, demonstrated in organisms ranging from yeast to mice, may involve the down-regulation of pathways, including Tor, Akt, and Ras. Here, we present data suggesting that yeast Tor1 and Sch9 (a homolog of the mammalian kinases Akt and S6K is a central component of a network that controls a common set of genes implicated in a metabolic switch from the TCA cycle and respiration to glycolysis and glycerol biosynthesis. During chronological survival, mutants lacking SCH9 depleted extracellular ethanol and reduced stored lipids, but synthesized and released glycerol. Deletion of the glycerol biosynthesis genes GPD1, GPD2, or RHR2, among the most up-regulated in long-lived sch9Delta, tor1Delta, and ras2Delta mutants, was sufficient to reverse chronological life span extension in sch9Delta mutants, suggesting that glycerol production, in addition to the regulation of stress resistance systems, optimizes life span extension. Glycerol, unlike glucose or ethanol, did not adversely affect the life span extension induced by calorie restriction or starvation, suggesting that carbon source substitution may represent an alternative to calorie restriction as a strategy to delay aging.

  4. An evaluation of information sources and requirements for nuclear plant-aging research with life-extension implications

    International Nuclear Information System (INIS)

    Jacobs, P.T.

    1986-01-01

    Information requirements for plant-aging and life-extension research are discussed. Various information sources that have been used in plant-aging studies and reliability assessments are described. Data-base searches and analyses were performed for a specific system using several data bases and plant sources. Comments are provided on the results using the various information sources

  5. Operational safety and reactor life improvements of Kyoto University Reactor

    International Nuclear Information System (INIS)

    Utsuro, M.; Fujita, Y.; Nishihara, H.

    1990-01-01

    Recent important experience in improving the operational safety and life of a reactor are described. The Kyoto University Reactor (KUR) is a 25-year-old 5 MW light water reactor provided with two thermal columns of graphite and heavy water as well as other kinds of experimental facilities. In the graphite thermal column, noticeable amounts of neutron irradiation effects had accumulated in the graphite blocks near the core. Before the possible release of the stored energy, all the graphite blocks in the column were successfully replaced with new blocks using the opportunity provided by the installation of a liquid deuterium cold neutron source in the column. At the same time, special seal mechanisms were provided for essential improvements to the problem of radioactive argon production in the column. In the heavy-water thermal column we have accomplished the successful repair of a slow leak of heavy water through a thin instrumentation tube failure. The repair work included the removal and reconstructions of the lead and graphite shielding layers and welding of the instrumentation tube under radiation fields. Several mechanical components in the reactor cooling system were also exchanged for new components with improved designs and materials. On-line data logging of almost all instrumentation signals is continuously performed with a high speed data analysis system to diagnose operational conditions of the reactor. Furthermore, through detailed investigations on critical components, operational safety during further extended reactor life will be supported by well scheduled maintenance programs

  6. Model of environmental life cycle assessment for coal mining operations.

    Science.gov (United States)

    Burchart-Korol, Dorota; Fugiel, Agata; Czaplicka-Kolarz, Krystyna; Turek, Marian

    2016-08-15

    This paper presents a novel approach to environmental assessment of coal mining operations, which enables assessment of the factors that are both directly and indirectly affecting the environment and are associated with the production of raw materials and energy used in processes. The primary novelty of the paper is the development of a computational environmental life cycle assessment (LCA) model for coal mining operations and the application of the model for coal mining operations in Poland. The LCA model enables the assessment of environmental indicators for all identified unit processes in hard coal mines with the life cycle approach. The proposed model enables the assessment of greenhouse gas emissions (GHGs) based on the IPCC method and the assessment of damage categories, such as human health, ecosystems and resources based on the ReCiPe method. The model enables the assessment of GHGs for hard coal mining operations in three time frames: 20, 100 and 500years. The model was used to evaluate the coal mines in Poland. It was demonstrated that the largest environmental impacts in damage categories were associated with the use of fossil fuels, methane emissions and the use of electricity, processing of wastes, heat, and steel supports. It was concluded that an environmental assessment of coal mining operations, apart from direct influence from processing waste, methane emissions and drainage water, should include the use of electricity, heat and steel, particularly for steel supports. Because the model allows the comparison of environmental impact assessment for various unit processes, it can be used for all hard coal mines, not only in Poland but also in the world. This development is an important step forward in the study of the impacts of fossil fuels on the environment with the potential to mitigate the impact of the coal industry on the environment. Copyright © 2016 Elsevier B.V. All rights reserved.

  7. Operational considerations for the Space Station Life Science Glovebox

    Science.gov (United States)

    Rasmussen, Daryl N.; Bosley, John J.; Vogelsong, Kristofer; Schnepp, Tery A.; Phillips, Robert W.

    1988-01-01

    The U.S. Laboratory (USL) module on Space Station will house a biological research facility for multidisciplinary research using living plant and animal specimens. Environmentally closed chambers isolate the specimen habitats, but specimens must be removed from these chambers during research procedures as well as while the chambers are being cleaned. An enclosed, sealed Life Science Glovebox (LSG) is the only locale in the USL where specimens can be accessed by crew members. This paper discusses the key science, engineering and operational considerations and constraints involving the LSG, such as bioisolation, accessibility, and functional versatility.

  8. In-situ metallography for damage assessment and life extension in power plants- a few case studies

    International Nuclear Information System (INIS)

    Raghu, N.; Muralidharan, N.G.; Jayakumar, T.; Kasiviswanathan, K.V.

    1996-01-01

    In-service inspection of components in power plants is necessary for damage assessment, life prediction and extension. The useful life of some of the components like pipelines are most crucial in case they are exposed to the conditions of high temperature and pressure. Periodic inservice inspection by means of non-destructive testing to obtain information on damage assessment is carried out as a routine and mandatory procedure. During these inspections, only reduction in localised and uniform wall thickness are measured. However, the microstructural degradation due to both normal and abnormal temperatures occurring conditions are not revealed by conventional non-destructive test methods during this routine inspection. For life prediction and extension programme, the information on microstructural degradation is essential and the same can be studies in an effective manner through in-situ metallography technique. (author)

  9. Life extension of MAPS-2 by replacement of boiler hairpin type heat exchangers

    International Nuclear Information System (INIS)

    Tripathi, J.C.; Rastogi, S.K.; Rastogi, A.K.

    2006-01-01

    The steam generating equipment in MAPS-1 and 2 are Hairpin type comprises of eight boiler assemblies arranged in two banks of four boilers each. Each hairpin type heat exchangers consist of 195 Monel-400 tubes of 12.7 mm OD x 1.24 mm WT. One boiler assembly consists of eleven inverted U type heat exchangers (called hairpin type heat exchangers) mounted in parallel on inlet and outlet heavy water manifolds and connected to steam drum through individual short riser. Heavy water flows through these tubes where as feed water enters the shell at the bottom of one leg called pre-heat leg. After commissioning of MAPS-2 in 1985, five hairpins of MAPS-2 developed leak during the course of operation by the year 1999. Absence of physical access for health assessment of steam generator tube and lack of provision for tube sheet cleaning to remove the deposits on feed water side had caused pile and resulted in tube failures by under deposit pitting corrosion. All the 88 hairpins of MAPS-2 were replaced to extend the plant life when MAPS-2 was taken out of grid for En-masse Coolant Channel Replacement job (EMCCR) in the year 2001 - 03. The long shutdown of MAPS units for EMCCR was considered to be cost effective since unscheduled plant shut downs on account of tube leaks could be avoided. (author)

  10. Model 9975 Life Extension Test Package 3 - Interim Report - January 2017

    Energy Technology Data Exchange (ETDEWEB)

    Daugherty, W. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2017-01-31

    Life extension package LE3 (9975-03203) has been instrumented and subjected to an elevated temperature environment for approximately 8 years. During this time, the cane fiberboard has been maintained at a maximum temperature of ~160 - 165 °F, which was established by a combination of internal (19 watts) and external heat sources. Several tests and parameters were used to characterize the package components. Results from these tests generally indicate agreement between this full-scale shipping package and small-scale laboratory tests on fiberboard samples, including the degradation models based on the laboratory tests. These areas of agreement include the rate of change of fiberboard weight, dimensions and density, and change in fiberboard thermal conductivity. Corrosion of the lead shield occurred at a high rate during the first several weeks of aging, but dropped significantly after most of the moisture in the fiberboard migrated away from the lead shield. Dimensional measurements of the lead shield indicate that no significant creep deformation has occurred. This is consistent with literature data that predict a very small creep deformation for the time at temperature experienced by this package. The SCV O-rings were verified to remain leak-tight after ~5 years aging at an average temperature of ~170 °F. This package provides an example of the extent to which moisture within a typical fiberboard assembly can redistribute in the presence of a temperature gradient such as might be created by a 19 watt internal heat load. The majority of water within the fiberboard migrated to the bottom layers of fiberboard, with approximately 2 kg of water (2 liters) eventually escaping from the package. Two conditions have developed that are not consistent with package certification requirements. The axial gap at the top of the package increased to a maximum value of 1.549 inches, exceeding the 1 inch criterion. In addition, staining and/or corrosion have formed in a few spots

  11. Age- and calorie-independent life span extension from dietary restriction by bacterial deprivation in Caenorhabditis elegans

    Directory of Open Access Journals (Sweden)

    Sager Jennifer

    2008-05-01

    Full Text Available Abstract Background Dietary restriction (DR increases life span and delays age-associated disease in many organisms. The mechanism by which DR enhances longevity is not well understood. Results Using bacterial food deprivation as a means of DR in C. elegans, we show that transient DR confers long-term benefits including stress resistance and increased longevity. Consistent with studies in the fruit fly and in mice, we demonstrate that DR also enhances survival when initiated late in life. DR by bacterial food deprivation significantly increases life span in worms when initiated as late as 24 days of adulthood, an age at which greater than 50% of the cohort have died. These survival benefits are, at least partially, independent of food consumption, as control fed animals are no longer consuming bacterial food at this advanced age. Animals separated from the bacterial lawn by a barrier of solid agar have a life span intermediate between control fed and food restricted animals. Thus, we find that life span extension from bacterial deprivation can be partially suppressed by a diffusible component of the bacterial food source, suggesting a calorie-independent mechanism for life span extension by dietary restriction. Conclusion Based on these findings, we propose that dietary restriction by bacterial deprivation increases longevity in C. elegans by a combination of reduced food consumption and decreased food sensing.

  12. TAF-4 is required for the life extension of isp-1, clk-1 and tpk-1 Mit mutants.

    Science.gov (United States)

    Khan, Maruf H; Ligon, Melissa; Hussey, Lauren R; Hufnal, Bryce; Farber, Robert; Munkácsy, Erin; Rodriguez, Amanda; Dillow, Andy; Kahlig, Erynn; Rea, Shane L

    2013-10-01

    While numerous life-extending manipulations have been discovered in the nematode Caenorhabditis elegans, one that remains most enigmatic is disruption of oxidative phosphorylation. In order to unravel how such an ostensibly deleterious manipulation can extend lifespan, we sought to identify the ensemble of nuclear transcription factors that are activated in response to defective mitochondrial electron transport chain (ETC) function. Using a feeding RNAi approach, we targeted over 400 transcription factors and identified 15 that, when reduced in function, reproducibly and differentially altered the development, stress response, and/or fecundity of isp-1(qm150) Mit mutants relative to wild-type animals. Seven of these transcription factors--AHA-1, CEH-18, HIF-1, JUN-1, NHR-27, NHR-49 and the CREB homolog-1 (CRH-1)-interacting protein TAF-4--were also essential for isp-1 life extension. When we tested the involvement of these seven transcription factors in the life extension of two other Mit mutants, namely clk-1(qm30) and tpk-1(qm162), TAF-4 and HIF-1 were consistently required. Our findings suggest that the Mit phenotype is under the control of multiple transcriptional responses, and that TAF-4 and HIF-1 may be part of a general signaling axis that specifies Mit mutant life extension.

  13. Life cycle management of french operating nuclear power plants

    International Nuclear Information System (INIS)

    Valibus, L.; Loriette, Ph.

    1998-01-01

    The PWR units of the EDF generation capacity in operation are young. They represent a technical and financial asset with a strategic significance both for the company and for France. According to regulations, even if the safety reports take into account a 40-year lifetime for the NSSS, the French regulations do not specify a time limit for the operation of the facilities according to the plant authorization decree. The Safety Authorities may, at any time require another safety re-examination. In fact, it was decided to carry out unit safety periodic reviews according to types of series. A program was set up in order to achieve regular assessments on the aging of the facilities. This program, combining all the skills within EDF and the manufacturers, is a guarantee for the coherence and the exhaustivity of the consideration as it relies on a great number of evaluation areas. It seems to day that under operational conditions, an appropriate surveillance and maintenance of components the 900 and 1300 MWe units should be able to fulfill the expected duty for a 40-year design life and very likely even longer. (author)

  14. Use of environmental qualification data and techniques for life extension purposes

    International Nuclear Information System (INIS)

    Sinnappan, J.

    1991-01-01

    As several nuclear power plants in the United States now reach or exceed the midpoint of their original 40-year design life, efforts are underway to identify techniques and methods to demonstrate that the actual useful life of these plants exceeds the original design life. Some surveillance and monitoring programs for safety-related components are being developed to determine the actual consumed life and predict the remaining life. These data are useful for showing that plant components actually have a longer qualified life, which is the basis for the license renewal of nuclear power plants. This paper summarizes a proposed methodology using existing environmental qualification (EQ) data for safety-related Class 1E equipment and the results of surveillance and monitoring techniques to assess the actual consumed life and, consequently, predict the remaining life. It also discusses several techniques that can be used to address various aging degradation mechanisms to demonstrate longer qualified life of safety-related components. Examples of how these techniques can be used on components are shown

  15. Shelf life extension of litchi (Litchi chinensis) and overcoming quarantine barriers to international trade using radiation technology

    International Nuclear Information System (INIS)

    Gautam, Satyendra; Saxena, Sudhanshu; Kumar, Sanjeev; Hajare, Sachin N.; Wadhawan, Surbhi; Mishra, B.B.; More, Varsha S.; Sharma, Arun

    2010-01-01

    Litchi (Litchi chinensis) has a very short shelf life of 2-3 days at ambient temperature limiting its marketability. Gamma radiation processing in combination with low temperature storage was explored as a method to achieve shelf life extension and fulfill quarantine requirement for export during storage physics, biochemical, microbiological, organoleptic, antioxidant and radioprotective properties of two major commercially grown Indian cultivars of litchi, 'Shahi' and 'China', were analysed. Radiation treatment reduced microbial load in a dose dependent manner. Radiation (0.5kGy) treated and low temperature stored fruits retained the 'good' organoleptic rating till 28 days of storage while maintaining other quality attributes. (author)

  16. Emergency end of life operations for CNES remote sensing satellites—Management and operational process

    Science.gov (United States)

    Bertrand, Régis; Alby, Fernand; Costes, Thierry; Dejoie, Joël; Delmas, Dominique-Roland; Delobette, Damien; Gibek, Isabelle; Gleyzes, Alain; Masson, Françoise; Meyer, Jean-Renaud; Moreau, Agathe; Perret, Lionel; Riclet, François; Ruiz, Hélène; Schiavon, Françoise; Spizzi, Pierre; Viallefont, Pierre; Villaret, Colette

    2012-10-01

    The French Space Agency (CNES) is currently operating thirteen satellites among which five remote sensing satellites. This fleet is composed of two civilian (SPOT) and three military (HELIOS) satellites and it has been recently completed by the first PLEIADES satellite which is devoted to both civil and military purposes. The CNES operation board decided to appoint a Working Group (WG) in order to anticipate and tackle issues related to the emergency End Of Life (EOL) operations due to unexpected on-board events affecting the satellite. This is of particular interest in the context of the French Law on Space Operations (LSO), entered in force on Dec. 2010, which states that any satellite operator must demonstrate its capability to control the space vehicle whatever the mission phase from the launch up to the EOL. Indeed, after several years in orbit the satellites may be affected by on-board anomalies which could damage the implementation of EOL operations, i.e. orbital manoeuvres or platform disposal. Even if automatic recovery actions ensure autonomous reconfigurations on redundant equipment, i.e. setting for instance the satellite into a safe mode, it is crucial to anticipate the consequences of failures of every equipment and functions necessary for the EOL operations. For this purpose, the WG has focused on each potential anomaly by analysing: its emergency level, as well as the EOL operations potentially inhibited by the failure and the needs of on-board software workarounds… The main contribution of the WG consisted in identifying a particular satellite configuration called "minimal Withdrawal From Service (WFS) configuration". This configuration corresponds to an operational status which involves a redundancy necessary for the EOL operations. Therefore as soon as a satellite reaches this state, a dedicated steering committee is activated and decides of the future of the satellite with respect to three options: a/. the satellite is considered safe and can

  17. Nitrogen vs argon: what is the most effective atmosphere for shelf-life extension of buckler sorrel leaves?

    OpenAIRE

    Pinela, José; Barros, Lillian; Antonio, Amilcar L.; Barreira, João C.M.; Carvalho, Ana Maria; Oliveira, M.B.P.P.; Ferreira, Isabel C.F.R.

    2016-01-01

    Buckler sorrel (Rumex induratus Boiss. & Reut.) is an underutilized leafy vegetable with peculiar sensory properties and potential as a gourmet food. In the food industry, different packaging methods have been used for shelf-life extension, but it is important to know how the quality of minimally processed vegetable is affected by these treatments. Recently, nitrogen and argon have been used for food packaging. Nitrogen is low soluble in water and other food constituents and does ...

  18. A study on the optimization of plant life extension and decommissioning for the improvement of economy in nuclear power plant

    Energy Technology Data Exchange (ETDEWEB)

    Shin, Jae In; Jung, K. J.; Chung, U. S.; Baik, S. T.; Park, S. K.; Lee, D. G.; Kim, H. R.; Park, B. Y

    2001-01-01

    Fundamental concepts on the life extension of the nuclear power plant and decommissioning optimization were established from the domestic abroad information and case analyses. Concerning the decommissioning of the nuclear power plant, the management according to decommissioning stages was analyzed by the investigation of the standard of the decommissioning(decontamination dismantling) regulation. Moreover, basics were set for the decommissioning of domestic nuclear power plants and research reactors from the analyses on the decommissioning technology and precedence.

  19. Plant life management for long term operation of nuclear power plants

    International Nuclear Information System (INIS)

    2005-01-01

    The world's fleet of Nuclear Power Plants (NPPs) is approximately 20 years old on average, and most plants are believed to be able to operate for 60 years or more. The design life of a NPP is typically 30 to 40 years. This may be extended by 10 to 20 years, or more, provided that the plant can demonstrate by analysis, trending, equipment and system upgrades, increased vigilance, testing, ageing management, and other means that license renewal presents no threat to public health and safety. The basic goal of Plant Life Management (PLiM) is to satisfy requirements for safe long-term supplies of electricity in an economically competitive way. The basic goal of the operating company and the owners to operate as long as economically reasonable and possible from safety point of view. PLiM is a management tool for doing that. PLiM is a system of programmes and procedures to satisfy safety requirements for safe operation and for power production in a competitive way and for time which is rational from technical and economical point of view. PLiM is not only a technical system, it is also an attitude of the operational company to keep the plant in operation as long as possible from safety and business point of view. The common objectives of PLiM assessment is to help and review the pre-conditions for PLiM and long-term operation approaches. PLiM should not be associated with extension of operational life-time of the NPP only. It is an owner's attitude and rational approach of the operating company to run the business economically and safely. The effectiveness of PLiM Programme can be assessed by three complementary kinds of assessment: self-assessment, peer review and comprehensive programme review by the plant owner/ operator. IAEA will provide the assessment service for peer review of PLiM. Preparation for a PLiM Assessment service will be initiated only after the IAEA has been formally approached by a MS and funding (e.g. an existing Technical cooperation project) has

  20. On Some Extensions of Szasz Operators Including Boas-Buck-Type Polynomials

    Directory of Open Access Journals (Sweden)

    Sezgin Sucu

    2012-01-01

    Full Text Available This paper is concerned with a new sequence of linear positive operators which generalize Szasz operators including Boas-Buck-type polynomials. We establish a convergence theorem for these operators and give the quantitative estimation of the approximation process by using a classical approach and the second modulus of continuity. Some explicit examples of our operators involving Laguerre polynomials, Charlier polynomials, and Gould-Hopper polynomials are given. Moreover, a Voronovskaya-type result is obtained for the operators containing Gould-Hopper polynomials.

  1. Review of selected cost drivers for decisions on continued operation of older nuclear reactors. Safety upgrades, lifetime extension, decommissioning

    International Nuclear Information System (INIS)

    1999-05-01

    Lately, the approach to the operation of relatively old NPPs has become an important issue for the nuclear industry for several reasons. First, a large part of operating NPPs will reach the planned end of their lives relatively soon. Replacing these capacities can involve significant investment for the concerned countries and utilities. Second, many operating NPPs while about 30 years old are still in very good condition. Their continued safe operation appears possible and may bring about essential economic gains. Finally, with the costs of new NPPs being rather high at present, continued operation of existing plants and eventually their lifetime extension are viable options for supporting the nuclear share in power generation. This is becoming especially important in view of the growing attention to the issue of global warming and the role of nuclear energy in greenhouse gas mitigation. This report is a review of information related to three cost categories that are part of such cost-benefit analysis: costs of safety upgrades for continued operation of a nuclear unit, costs of lifetime extension and costs of decommissioning. It can serve as a useful reference source for experts and decision makers involved in the economics of operating NPPs

  2. Lack of robustness of life extension associated with several single-gene P element mutations in Drosophila melanogaster.

    Science.gov (United States)

    Mockett, Robin J; Nobles, Amber C

    2013-10-01

    The hypothesis tested in this study was that single-gene mutations found previously to extend the life span of Drosophila melanogaster could do so consistently in both long-lived y w and standard w (1118) genetic backgrounds. GAL4 drivers were used to express upstream activation sequence (UAS)-responder transgenes globally or in the nervous system. Transgenes associated with oxidative damage prevention (UAS-hSOD1 and UAS-GCLc) or removal (EP-UAS-Atg8a and UAS-dTOR (FRB) ) failed to increase mean life spans in any expression pattern in either genetic background. Flies containing a UAS-EGFP-bMSRA (C) transgene associated with protein repair were found not to exhibit life extension or detectable enhanced green fluorescent protein (EGFP) activity. The presence of UAS-responder transgenes was confirmed by PCR amplification and sequencing at the 5' and 3' end of each insertion. These results cast doubt on the robustness of life extension in flies carrying single-gene mutations and suggest that the effects of all such mutations should be tested independently in multiple genetic backgrounds and laboratory environments.

  3. Inservice inspection of heavy water plants - a tool in assessing damage to components and life extension

    International Nuclear Information System (INIS)

    Subramanian, C.V.; Thavasimuthu, M.; Bhattacharys, D.K.; Baldev Raj

    1994-01-01

    Any system and its components are expected to give trouble free service over a certain period of time known as life time. The life time is estimated during the design stage. To achieve the design life, certain level of quality are to be defined and this quality has to be worked into the components by proper fabrication processes and their compliance with quality are to be checked. In addition, one has to guard against initiation or propagation of defects which may occur due to normal and abnormal service conditions. Non-destructive test (NDT) techniques are widely used for finding the health of the component. The role of NDT extends from the production stage to the entire life period of the system. This paper highlights the periodic in-service inspection (ISI) carried out on various components of the Heavy Water Plants (HWP) in India in assessing the integrity of the components and predicting the life of the components. (author). 3 refs., 4 figs

  4. Effect of decontamination on aging processes and considerations for life extension

    International Nuclear Information System (INIS)

    Diercks, D.R.

    1987-10-01

    The basis for a recently initiated program on the chemical decontamination of nuclear reactor components and the possible impact of decontamination on extended-life service is described. The incentives for extending plant life beyond the present 40-year limit are discussed, and the possible aging degradation processes that may be accentuated in extended-life service are described. Chemical decontamination processes for nuclear plant primary systems are summarized with respect to their corrosive effects on structural alloys, particularly those in the aged condition. Available experience with chemical cleaning processes for the secondary side of PWR steam generators is also briefly considered. Overall, no severe materials corrosion problems have been found that would preclude the use of these chemical processes, but concerns have been raised in several areas, particularly with respect to corrosion-related problems that may develop during extended service

  5. Development of overall evaluation system for nuclear plant life extension, (3)

    International Nuclear Information System (INIS)

    Soneda, Naoki; Takao, Takeshi

    1990-01-01

    Life and integrity assessment of structural components is essential for the nuclear plant life evaluation. Many works have been done on the life and integrity assessment methods up to date. However, there are few methods for the reliability evaluation of analysis results obtained by those methods. This report presents a reliability evaluation method of analysis results based on knowledge base and its application to the integrity assessment of PWR reactor pressure vessel against PTS event. Probabilistic fracture mechanics method is used to obtain the sensitivity of failure probability to analysis inputs. Knowledge base of fuzzy rules is constructed using the sensitivity analysis results. This method makes it possible to set reasonable safety margins to the analysis results. (author)

  6. Plant condition assessments as a requirement before major investment in life extension for a CANDU nuclear power plant

    International Nuclear Information System (INIS)

    Aubray, Marc

    2002-01-01

    Full text: Since, to extend the life of a CANDU-6 reactor beyond its original design life requires the replacement of reactor components (380 pressure and calandria tubes), a major investment will have to be done. After a preliminary technical and economical feasibility study, Hydro- Quebec, owner of the Gentilly-2 NPP, has decided to perform a more detailed assessment to: 1. Get assurance that it is technically and economically viable to extend Gentilly-2 for another 20 years beyond the original design life; 2. Identify the detailed work to be done during the refurbishment period planned in 2008-2009; 3. Define the overall cost and the general schedule of the refurbishment phase; 4. Ensure an adequate licensing strategy to restart after refurbishment; 5. Complete all the Environmental Impact Studies required to obtain the government authorizations. The business case to support the refurbishment of Gentilly-2 has to take in consideration the reactor core components, which will be the major work to be completed during refurbishment. In summary the following main component will have to be changed or refreshed: The pressure and calandria tubes and the feeders (partial replacement only) (ageing mechanisms); The control computers (obsolescence); The condenser tubes (tubes plugging); The turbine control and electric-governor (obsolescence). An extensive campaign is under way to assess the 'health' of the station systems, structures and components (SSC). Two processes have been used for this assessment: Plant Life Management Studies (PLIM) for approximately 10 critical SSC or families of SSC (PLIM Studies); Condition Assessment Studies for other SSC with a lower impact on the Plant production or safety). The PLIM Studies are done on SSC's, which were judged critical because they are not replaceable (Reactor Building, Calandria), or that their failure could have a significant impact on safety or production (electrical motors, majors pumps, heat exchangers and pressure

  7. 75 FR 29568 - Extension of Agency Information Collection Activity Under OMB Review: Aircraft Operator Security

    Science.gov (United States)

    2010-05-26

    ... all passengers. The passenger watch list checks currently conducted by aircraft operators will soon be.... These programs require aircraft operators to maintain and update records to ensure compliance with... information collected to determine compliance with 49 CFR part 1544 and to ensure the freedom of movement for...

  8. Improvment, extension and integration of operational decision support systems for nuclear emergency management (DSSNET)

    International Nuclear Information System (INIS)

    Ehrhardt, J.

    2005-07-01

    The DSSNET network was established in October 2000 with the overall objective to create an effective and accepted framework for better communication and understanding between the community of institutions involved in operational off-site emergency management and the many and diverse RTD institutes further developing methods and tools in this area, in particular decision support systems (DSS), for making well informed and consistent judgements with respect to practical improvements of emergency response in Europe. 37 institutions from 21 countries of East and West Europe have been members of the network with about half of them responsible for operational emergency management. The objectives of the network have been numerous and the more important ones include: to ensure that future RTD is more responsive to user needs, to inform the user community of new developments and their potential for improving emergency response, to improve operational decision support systems from feedback of operational experience, to identify how information and data exchange between countries can be improved, to promote greater coherence among operational decision support systems and to encourage shared development of new and improved decision support systems features, and to improve the practicability of operational decision support systems. To stimulate the communication and feedback between the operational and the RTD community, problem-oriented emergency exercises were performed, which covered the various time phases of an accident and which extended from the near range to farther distances with frontier crossing transport of radionuclides. The report describes the objectives of the DSSNET, the five emergency exercises performed and the results of their evaluation. They provided valuable insight and lessons for operators and users of decision support systems, in particular the need for much more intensive training and exercising with decision support systems and their interaction with

  9. Spoilage and shelf-life extension of fresh fish and shellfish.

    Science.gov (United States)

    Ashie, I N; Smith, J P; Simpson, B K

    1996-01-01

    Fresh fish and shellfish are highly perishable products due to their biological composition. Under normal refrigerated storage conditions, the shelf life of these products is limited by enzymatic and microbiological spoilage. However, with increasing consumer demands for fresh products with extended shelf life and increasing energy costs associated with freezing and frozen storage, the fish-processing industry is actively seeking alternative methods of shelf life preservation and marketability of fresh, refrigerated fish and at the same time economizing on energy costs. Additional methods that could fulfill these objectives include chemical decontamination, low-dose irradiation, ultra-high pressure, and modified atmosphere packaging (MAP). This review focuses on the biochemical and microbiological composition of fresh fish/shellfish, the spoilage patterns in these products, factors influencing spoilage, and the combination treatments that can be used in conjunction with refrigeration to extend the shelf life and keeping quality of fresh fish/shellfish. The safety concerns of minimally processed/MAP fish, specifically with respect to the growth of Clostridium botulinum type E, is also addressed.

  10. Transitions in waste treatment as a driver for product life extension

    DEFF Research Database (Denmark)

    Lauridsen, Erik Hagelskjær; Jørgensen, Michael Søgaard

    2015-01-01

    that emphasise prolonged product life and stresses the importance of avoiding down cycling of products and material streams. The destabilisation of the old incineration regime thus opens up for new opportunities with both new policies and potentially new social practices. This paper describes a number...

  11. 75 FR 18545 - MMS Information Collection Activity: 1010-0067, Oil and Gas Well-Completion Operations, Extension...

    Science.gov (United States)

    2010-04-12

    ..., you should comment and provide your total capital and startup cost components or annual operation... cost factors, including system and technology acquisition, expected useful life of capital equipment, discount rate(s), and the period over which you incur costs. Capital and startup costs include, among other...

  12. Two-phase 1D+1D model of a DMFC: development and validation on extensive operating conditions range

    Energy Technology Data Exchange (ETDEWEB)

    Casalegno, A.; Marchesi, R.; Parenti, D. [Dipartimento di Energetica, Politecnico di Milano (Italy)

    2008-02-15

    A two-phase 1D+1D model of a direct methanol fuel cell (DMFC) is developed, considering overall mass balance, methanol transport in gas phase through anode diffusion layer, methanol and water crossover. The model is quantitatively validated on an extensive range of operating conditions, 24 polarisation curves. The model accurately reproduces DMFC performance in the validation range and, outside this, it is able to predict values under feasible operating conditions. Finally, the estimations of methanol crossover flux are qualitatively and quantitatively similar to experimental measures and the main local quantities' trends are coherent with results obtained with more complex models. (Abstract Copyright [2008], Wiley Periodicals, Inc.)

  13. 78 FR 77484 - Extension of Agency Information Collection Activity Under OMB Review: Pipeline System Operator...

    Science.gov (United States)

    2013-12-23

    ... Officer, Office of Information Technology (OIT), TSA-11, Transportation Security Administration, 601 South... Information Collection Activity Under OMB Review: Pipeline System Operator Security Information AGENCY... Transportation Security Administration (TSA) has forwarded the Information Collection Request (ICR), Office of...

  14. Rights and quality of life of individuals with intellectual disability and extensive support needs

    Directory of Open Access Journals (Sweden)

    Patricia NAVAS MACHO

    2018-04-01

    Full Text Available People with intellectual (ID and developmental disabilities who have generalized or extensive support needs constitute a particularly vulnerable group that has traditionally experienced situations of exclusion. Despite this, their situation has not been a priority subject of study nor have there been specific developments in social policy to respond to their needs, which can be translated into an absence of interest in knowing the reality of these group, difficulties to guarantee the fulfillment of their rights, and lack of initiative aimed to achieve their full inclusion in society. Is therefore necessary to undertake different actions, translated into objectives of the present work: to explore and synthesize existing data on this group in our country; to detect their needs and their fulfillment; and to propose evidence-based guidelines to ensure their well-being and rights. For this purpose, the methodology used consisted of: (a a review of the most relevant scientific literature of the last ten years on ID and extensive support needs; and (b the analysis of the results yield by two national surveys carried out in Spain: the Disability, Independence, and Dependency Situations survey, EDAD (INE, 2008, and the System for Autonomy and Care for Dependency, SAAD (IMSERSO, 2016, among others. Considering the disparities observed within this group, urgent lines of action are highlighted, which are aimed to improve the knowledge about the living conditions of people with more significant ID and drive better practices in the provision of supports to this group.

  15. Extension of Operating Range in Pump-Turbines. Influence of Head and Load

    Directory of Open Access Journals (Sweden)

    Carme Valero

    2017-12-01

    Full Text Available Due to the increasing share of new renewable energies like wind and solar in the generation of electricity the need for power regulation and energy storage is becoming of paramount importance. One of the systems to store huge amounts of energy is pumped storage using reversible hydropower units. The machines used in these power plants are pump-turbines, which can operate as a pump and as a turbine. The surplus of electrical energy during low consumption hours can be converted into potential hydraulic energy by pumping water to a higher level. The stored energy can be converted into electricity again by operating the runner as a turbine. Due to new regulation requirements machines have to extend the operating range in order to match energy generation with consumption for the grid stability. In this paper the consequences of extending the operating range in existing pump-turbines have been studied. For that purpose, the data obtained after two years of condition monitoring were analyzed. Vibrations and pressure fluctuations of two pump-turbines of 85 MW each have been studied during pump and turbine operation. For turbine operation the effects of extending the operating range from the standard range of 45–85 MW to and increased range of 20–85 MW were analyzed. The change in vibration levels and signatures at very low load are presented with the identification of the phenomena that occur under these conditions. The influence of head in the vibration behavior is also presented. The appearance of fluid instabilities generated at part load that may produce power swing is also presented. Finally, the effect of head on the vibration levels for pump operation is shown and analyzed.

  16. Effect of irradiation on the extension of shelf life of tropical food products

    International Nuclear Information System (INIS)

    Avadhani, P.N.; Lian, O.B.; Nio, L.E.

    1985-01-01

    The effect of gamma-radiation with cobalt-60 at doses ranging from 02.5 to 2.00 kGy on selected local fruits and vegetables was studied. It was found that ripening was delayed in unripe chikus at 0.5 and 1.0 kGy. At similar doses fungal infection in ripe papayas was retarded. Ripening was accelerated and shelf life was prolonged in mature, unripe papayas. Other effects noted were: mangosteens were better preserved (0.25-0.40 kGy), pineapples showed core damage (0.5-2.0 kGy), limes were damaged (0.5-1.0 kGy), and brinjals kept fresh for several days (0.5-1.0 kGy). At similar doses, acceleration of ripening was noted for green chillies, and the shelf life was prolonged for red chillies

  17. Deterioration and shelf-life extension of fish and fishery products by modified atmosphere packaging

    OpenAIRE

    Payap Masniyom

    2011-01-01

    Fish and fishery products have been recognized as a nutrition source due to their high protein content. Moreover, theycontain considerable amount of unsaturated fatty acids, especially omega-3 fatty acids, which are regarded as preventivecompounds. However, shelf-life of seafood is limited by biochemical and microbiological changes. Modified atmospherepackaging (MAP) is widely used for minimally processed fishery products including fresh meat for retarding microbial growthand enzymatic spoila...

  18. Shelf-life extension of pre-packed whole wheat flour using low dose gamma irradiation

    International Nuclear Information System (INIS)

    Rao, V.S.; Marathe, S.A.; Pednekar, M.D.; Machaiah, J.P.; Rao, B.Y.K.; Adhikari, H.R.; Thomas, Paul

    1997-01-01

    Storage studies on irradiated (0.25, 0.5 and 1.0 kGy) and non-irradiated prepacked whole wheat flour have shown that wheat flour irradiated at 0.25 kGy and stored at room temperature for 6 months did not show significant changes in the functional qualities and acceptability of the product, thereby extending the shelf-life and marketability of the product. (author). 3 refs., 4 figs

  19. Shelf life extension of fresh turmeric ( Curcuma longa L.) using gamma radiation

    Science.gov (United States)

    Dhanya, R.; Mishra, B. B.; Khaleel, K. M.; Cheruth, Abdul Jaleel

    2009-09-01

    Gamma radiation processing was found to extend shelf life of fresh turmeric. A 5 kGy radiation dose and 10 °C storage temperature was found to keep peeled turmeric samples microbe free and acceptable until 60 days of storage. The control sample without radiation treatment spoiled within a week of storage. The changes in color, texture and moisture content of fresh turmeric due to radiation treatment were found to be statistically insignificant.

  20. Shelf life extension of fresh turmeric (Curcuma longa L.) using gamma radiation

    Energy Technology Data Exchange (ETDEWEB)

    Dhanya, R. [P.G. Department and Research Centre in Botany, Sir Syed College, Taliparamba 670142, Kerala (India); Mishra, B.B. [Food Technology Division, Bhabha Atomic Research Centre, Mumbai 400085 (India); Khaleel, K.M. [P.G. Department and Research Centre in Botany, Sir Syed College, Taliparamba 670142, Kerala (India)], E-mail: khaleelchovva@yahoo.co.in; Cheruth, Abdul Jaleel [DMJM International (Cansult Maunsell/AECOM Ltd.), Consultant of Gardens Sector Projects, Alain Municipality and Eastern Emirates, P.O. Box 1419, Al-Ain, Abu Dhabi (United Arab Emirates)], E-mail: abdul79jaleel@yahoo.co.in

    2009-09-15

    Gamma radiation processing was found to extend shelf life of fresh turmeric. A 5 kGy radiation dose and 10 {sup o}C storage temperature was found to keep peeled turmeric samples microbe free and acceptable until 60 days of storage. The control sample without radiation treatment spoiled within a week of storage. The changes in color, texture and moisture content of fresh turmeric due to radiation treatment were found to be statistically insignificant.

  1. Shelf life extension of fresh turmeric (Curcuma longa L.) using gamma radiation

    International Nuclear Information System (INIS)

    Dhanya, R.; Mishra, B.B.; Khaleel, K.M.; Cheruth, Abdul Jaleel

    2009-01-01

    Gamma radiation processing was found to extend shelf life of fresh turmeric. A 5 kGy radiation dose and 10 o C storage temperature was found to keep peeled turmeric samples microbe free and acceptable until 60 days of storage. The control sample without radiation treatment spoiled within a week of storage. The changes in color, texture and moisture content of fresh turmeric due to radiation treatment were found to be statistically insignificant.

  2. Use of E-Beam for Shelf-Life Extension and Sanitizing of Marinated Pork Loin

    Science.gov (United States)

    García-Márquez, I.; Ordóñez, J. A.; Cambero, M. I.; Cabeza, M. C.

    2012-01-01

    The effectiveness of E-beam radiation to extend the shelf-life of marinated pork loin slices stored at 4 and 8°C (temperature abuse) has been studied. The shelf-life was extended from 7 to 16 and >20 days after the application of 1 and 2 kGy, respectively. In the event of a temperature abuse occuring during the product distribution (e.g., increase to 8°C), the shelf-life would be extended from 5 to 10 and 16 days, respectively, when applying the doses mentioned previously. From a public health point of view, the irradiation of marinated pork loin may be marketable for a longer period of time of up to two weeks, and guarantees a practically Salmonella and Listeria-free product. Minor changes are produced by the E-beam treatment in the main sensory and rheological characteristics. The odor was the most affected feature, but the off-odors diminished with increased storage. In any case, testers judged the samples to be adequate for marketing. PMID:23227053

  3. Shelf-life Extension and Improvement of the Microbiological Quality of Fresh Sausage by Irradiation

    International Nuclear Information System (INIS)

    Hammad, A.A.I.; El-Mongy, T.M.; Mabrouk, A.K.

    2000-01-01

    Fifty samples of fresh sausage were randomly collected from different meat products markets in Great Cairo. They were analysed for microbiological quality. The results showed that 26 (52%) samples had total aerobic bacterial counts more than 10 7 cfu/g. Staphylococcus aureus was present in all samples and 19 (38%) samples had counts more than maximum permissible level (10 3 cfu/g). Enterococcus faecalis numbers more than 10 5 cfu/g were found in 14 (28%) samples. Coliform bacteria were present in all sausage samples and 19(38%) samples had counts more than 10 3 cfu/g, while salmonella was detected in only 5 (10%) samples. Therefore, fresh sausages in local market were highly contaminated with different microorganisms including spoilage and pathogenic bacteria. Irradiation dose of 4 kGy greatly reduced the numbers of aerobic and anaerobic bacteria, lactobacilli and yeasts without affecting the organoleptic properties of the samples. It extended the shelf-life of fresh sausage up to about 15 days at refrigeration temperature (5+-1) while the shelf-life was only 5 days for unirradiated samples. Irradiation dose of 6 kGy had greater effect on the microbiological counts and extended the shelf-life of fresh sausage more than 25 days, however, it slightly affected its organoleptic properties. Sausage samples exposed to this irradiation dose was microbiologically safe, being free from Enterobacteriaceae, Staph, aureus, Ent, faecalis, coliform bacteria, Salmonella and moulds

  4. Reactor Dosimetry Aspects of the Service Life Extension of the Hungarian Paks NPP

    Directory of Open Access Journals (Sweden)

    Zsolnay Eva M.

    2016-01-01

    Full Text Available The service life of the Hungarian Paks Nuclear Power Plant (NPP will be extended from the originally planned 30 years to 50 years. To improve the reliability of the results obtained in frame of the old reactor pressure vessel (RPV surveillance programme, new methods have been developed, and based on them, the old exposition data have been re-evaluated for all the four reactor units. At the same time, a new RPV surveillance programme has been developed and introduced, and long term irradiations have been performed to determine the radiation damage of the surveillance specimens due to the high fast neutron exposition. Neutron transport calculations have been performed with a validated neutron transport code system to determine the fast neutron exposition of the RPVs during the extended service life. The cavity dosimetry is in the introductory phase. This paper presents the new developments in the field of the RPV surveillance dosimetry and summarises the results obtained. According to the results the service life of the NPP can safely be extended for the planned 50 years.

  5. Use of E-Beam for Shelf-Life Extension and Sanitizing of Marinated Pork Loin

    Directory of Open Access Journals (Sweden)

    I. García-Márquez

    2012-01-01

    Full Text Available The effectiveness of E-beam radiation to extend the shelf-life of marinated pork loin slices stored at 4 and 8°C (temperature abuse has been studied. The shelf-life was extended from 7 to 16 and >20 days after the application of 1 and 2 kGy, respectively. In the event of a temperature abuse occuring during the product distribution (e.g., increase to 8°C, the shelf-life would be extended from 5 to 10 and 16 days, respectively, when applying the doses mentioned previously. From a public health point of view, the irradiation of marinated pork loin may be marketable for a longer period of time of up to two weeks, and guarantees a practically Salmonella and Listeria-free product. Minor changes are produced by the E-beam treatment in the main sensory and rheological characteristics. The odor was the most affected feature, but the off-odors diminished with increased storage. In any case, testers judged the samples to be adequate for marketing.

  6. The shelf life extension of refrigerated grass carp (Ctenopharyngodon idellus) fillets by chitosan coating combined with glycerol monolaurate.

    Science.gov (United States)

    Yu, Dawei; Jiang, Qixing; Xu, Yanshun; Xia, Wenshui

    2017-08-01

    A novel chitosan-based coating solution was prepared by combining glycerol monolaurate (GML) for shelf life extension of refrigerated grass carp fillets. The control and coated fillets were analyzed periodically for physicochemical (pH, thiobarbituric acid (TBA) value, total volatile basic nitrogen (TVB-N) value, K value, and shear force), microbiological (total viable counts (TVC), psychrophilic bacteria counts (PTC), Pseudomonads and H 2 S-producing bacteria) and sensorial characteristics. The results showed that chitosan-GML coated samples presented better quality preservation effects than chitosan coating alone. In addition, 2% chitosan enriched with 0.3% GML showed the significant (Pchitosan coating enriched with GML was a promising method to extend the shelf life of refrigerated fillets. Copyright © 2017. Published by Elsevier B.V.

  7. Expert Panel Recommendations for Hanford Double-Shell Tank Life Extension

    Energy Technology Data Exchange (ETDEWEB)

    Stewart, Charles W; Bush, Spencer H; Berman, Herbert Stanton; Czajkowski, Carl J; Divine, James R; Posakony, Gerald J; Johnson, A B; Elmore, Monte R; Reynolds, D A; Anantatmula, Ramamohan P; Sindelar, Robert L; Zapp, Philip E

    2001-06-29

    Expert workshops were held in Richland in May 2001 to review the Hanford Double-Shell Tank Integrity Project and make recommendations to extend the life of Hanford's double-shell waste tanks. The workshop scope was limited to corrosion of the primary tank liner, and the main areas for review were waste chemistry control, tank inspection, and corrosion monitoring. Participants were corrosion experts from Hanford, Savannah River Site, Brookhaven National Lab., Pacific Northwest National Lab., and several consultants. This report describes the current state of the three areas of the program, the final recommendations of the workshop, and the rationale for their selection.

  8. Effect of gamma-irradiation for shelf life extension of chicken meat

    International Nuclear Information System (INIS)

    Prachasitthisak, Y.; Ito, Hitoshi.

    1996-01-01

    On the study of microbiological quality of 12 samples of chicken meat produced in several different area in Japan, total aerobic bacteria were determined as 8x10 4 to 5x10 7 per g. Coliforms were 8x10 1 to 3x10 4 per g with Escherichia, Proteus and Klebsiella. Dominant putrefactive bacteria were determined as lactic acid bacteria, Pseudomonas and Flavobacterium. The shelf life of irradiated chicken meat at 1 kGy extended more than 6 days at 10degC storage. Irradiation of chicken meat at 3 kGy extended 12 days. Coliforms were disappeared at 1 kGy irradiation. (author)

  9. Multiply Controlled Verbal Operants: An Analysis and Extension to the Picture Exchange Communication System

    Science.gov (United States)

    Bondy, A.; Tincani, M.; Frost, L.

    2004-01-01

    This paper presents Skinner's (1957) analysis of verbal behavior as a framework for understanding language acquisition in children with autism. We describe Skinner's analysis of pure and impure verbal operants and illustrate how this analysis may be applied to the design of communication training programs. The picture exchange communication system…

  10. Ensemble Kalman Filtering with Residual Nudging: An Extension to State Estimation Problems with Nonlinear Observation Operators

    KAUST Repository

    Luo, Xiaodong; Hoteit, Ibrahim

    2014-01-01

    -space-based strategy, called residual nudging, to improve the stability of the EnKF when dealing with linear observation operators. The main idea behind residual nudging is to monitor and, if necessary, adjust the distances (misfits) between the real observations

  11. Extension of raw watermelon juice shelf-life up to 58days by hyperbaric storage.

    Science.gov (United States)

    Lemos, Álvaro T; Ribeiro, Ana C; Fidalgo, Liliana G; Delgadillo, Ivonne; Saraiva, Jorge A

    2017-09-15

    Hyperbaric storage (HS) of raw watermelon juice, at 50, 62.5 and 75MPa, at temperatures of 10, 15 and ≈25°C (room temperature, RT), was studied to evaluate shelf-life comparatively to refrigeration (RF, 4°C). Generally, RF caused an increase of microbial loads to values ≥6.0logCFU/mL after 7days of storage. Contrarily, HS at 62.5/75MPa (15°C) showed a reduction of initial loads, by at least 2.5logCFU/mL, up to 58days, while pH and colour values did not changed under these HS conditions. Additionally, the combination of a lower temperature with HS has beneficial effects to control microbial development, particularly for the lower pressure studied (50MPa/10°C). In conclusion, HS increased watermelon juice shelf-life for at least 58days, indicating a great potential for future RF replacement. Copyright © 2017 Elsevier Ltd. All rights reserved.

  12. Uses of irradiation or sodium tripolyphosphate for shelf-life extension of quail carcasses

    International Nuclear Information System (INIS)

    Rady, A.H.; Khalaf, H.H.; Afifi, E.A.; Nasr, E.H.

    2002-01-01

    this investigation aims to study the possibility of using gamma iraadiation or sodium tripolyphoshate (STPP) for increasing shelf-life of quail carcasses during cold storage. The quail carcasses were gamma irradiated at 4, 6 and 8 kGy or soaked in 3% STPP. The effect of these treatments on the organoleptic, microbiological aspects and chemical properties of samples under investigation were evaluated during cold storage (4± 1C degree). The results indicated that, the chemical compositions of samples did not alter by gamma irradiation or soaking in STPP. Futhermore, treatment had no deterious effects on the organoleptic properties of quail samples. Meanwhile, irradiation of samples at doses of 4, 6 and 8 kGy or soaking in STPP greatly reduced its microbial count and prolonged the shelf-life for 15,21,24 and 9 days at 4 ± 1 Cdegree in comparison with 6 days for control samples. Moreover, the acid value (A.V), peroxide value (P.V) and thiobarbituric acid (TBA) value were increased after irradiation, while total volatile basic nitrogen (TVBN) content had no real change by this treatment. On the other hand, soakking in STPP treatment decreased these values and gradual increases were observed during cold storage

  13. Shelf-life extension of Pacific white shrimp using algae extracts during refrigerated storage.

    Science.gov (United States)

    Li, Yingchang; Yang, Zhongyan; Li, Jianrong

    2017-01-01

    Shrimp is a low-fat, high-protein aquatic product, and is susceptible to spoilage during storage. To establish an effective method for the quality control of Pacific white shrimp, the effects of polyphenols (PP) and polysaccharides (PS) from Porphyra yezoensis on the quality of Pacific white shrimp were assessed during refrigerated storage. Pacific white shrimp samples were treated with 5 g L -1 polyphenols, and 8 g L -1 polysaccharides, then stored at 4 ± 1 °C for 8 days. All samples were subjected to measurement of total viable count (TVC), pH, total volatile basic nitrogen (TVB-N), K-value, thiobarbituric acid (TBA), polyphenol oxidase (PPO) activity, and were also assessed by sensory evaluation. The results showed that PP, PS, and the mixture of polyphenols and polysaccharides (PP+PS) could inhibit the increase of total volatile basic nitrogen (TVB-N), thiobarbituric acid (TBA) and K-value, and reduce total viable count (TVC) compared with the control group. PP could also inhibit polyphenol oxidase (PPO) activity. Sensory evaluation proved the efficacy of PP and PS by maintaining the overall quality of Pacific white shrimp during refrigerated storage. Moreover, PP+PS could extend the shelf-life of shrimp by 3-4 days compared with the control group. PP+PS could more effectively maintain quality and extend shelf-life during refrigerated storage. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

  14. A life cycle cost economics model for projects with uniformly varying operating costs. [management planning

    Science.gov (United States)

    Remer, D. S.

    1977-01-01

    A mathematical model is developed for calculating the life cycle costs for a project where the operating costs increase or decrease in a linear manner with time. The life cycle cost is shown to be a function of the investment costs, initial operating costs, operating cost gradient, project life time, interest rate for capital and salvage value. The results show that the life cycle cost for a project can be grossly underestimated (or overestimated) if the operating costs increase (or decrease) uniformly over time rather than being constant as is often assumed in project economic evaluations. The following range of variables is examined: (1) project life from 2 to 30 years; (2) interest rate from 0 to 15 percent per year; and (3) operating cost gradient from 5 to 90 percent of the initial operating costs. A numerical example plus tables and graphs is given to help calculate project life cycle costs over a wide range of variables.

  15. Analysis of Piping Systems for Life Extension of Heavy Water Plants in India

    International Nuclear Information System (INIS)

    Mishra, Rajesh K.; Soni, R.S.; Kushwaha, H.S.; Raj, V. Venkat

    2002-01-01

    Heavy water production in India has achieved many milestones in the past. Two of the successfully running heavy water plants are on the verge of completion of their design life in the near future. One of these two plants, situated at Kota, is a hydrogen sulfide based plant and the other one at Tuticorin is an ammonia-based plant. Various exercises have been planned with an aim to assess the fatigue usage for the various components of these plants in order to extend their life. Considering the process parameters and the past history of the plant performance, critical piping systems and equipment are identified. Analyses have been carried out for these critical piping systems for mainly two kinds of loading, viz. sustained loads and the expansion loads. Static analysis has been carried out to find the induced stress levels due to sustained as well as thermal expansion loading as per the design code ANSI B31.3. Due consideration has been given to the design corrosion allowance while evaluating the stresses due to sustained loads. At the locations where the induced stresses (S L ) due to the sustained loads are exceeding the allowable limits (S h ), exercises have been carried out considering the reduced corrosion allowance value. This strategy is adopted in view of the fact that the thickness measurements carried out at site at various critical locations show a very low rate of corrosion. It has been possible to qualify the system with reduced corrosion allowance values however, it is recommended to keep that location under periodic monitoring. The strategy adopted for carrying out analysis for thermal expansion loading is to qualify the system as per the code allowable value (S a ). If the stresses are more than the allowable value, credit of liberal allowable value as suggested in the code i.e., with the addition of the term (S h -S L ) to the term 0.25 S h , has been taken. However, if at any location, it is found that thermal stress is high, fatigue analysis has

  16. Telomerase-mediated life-span extension of human primary fibroblasts by human artificial chromosome (HAC) vector

    International Nuclear Information System (INIS)

    Shitara, Shingo; Kakeda, Minoru; Nagata, Keiko; Hiratsuka, Masaharu; Sano, Akiko; Osawa, Kanako; Okazaki, Akiyo; Katoh, Motonobu; Kazuki, Yasuhiro; Oshimura, Mitsuo; Tomizuka, Kazuma

    2008-01-01

    Telomerase-mediated life-span extension enables the expansion of normal cells without malignant transformation, and thus has been thought to be useful in cell therapies. Currently, integrating vectors including the retrovirus are used for human telomerase reverse transcriptase (hTERT)-mediated expansion of normal cells; however, the use of these vectors potentially causes unexpected insertional mutagenesis and/or activation of oncogenes. Here, we established normal human fibroblast (hPF) clones retaining non-integrating human artificial chromosome (HAC) vectors harboring the hTERT expression cassette. In hTERT-HAC/hPF clones, we observed the telomerase activity and the suppression of senescent-associated SA-β-galactosidase activity. Furthermore, the hTERT-HAC/hPF clones continued growing beyond 120 days after cloning, whereas the hPF clones retaining the silent hTERT-HAC senesced within 70 days. Thus, hTERT-HAC-mediated episomal expression of hTERT allows the extension of the life-span of human primary cells, implying that gene delivery by non-integrating HAC vectors can be used to control cellular proliferative capacity of primary cultured cells

  17. Assimilation of endogenous nicotinamide riboside is essential for calorie restriction-mediated life span extension in Saccharomyces cerevisiae.

    Science.gov (United States)

    Lu, Shu-Ping; Kato, Michiko; Lin, Su-Ju

    2009-06-19

    NAD(+) (nicotinamide adenine dinucleotide) is an essential cofactor involved in various biological processes including calorie restriction-mediated life span extension. Administration of nicotinamide riboside (NmR) has been shown to ameliorate deficiencies related to aberrant NAD(+) metabolism in both yeast and mammalian cells. However, the biological role of endogenous NmR remains unclear. Here we demonstrate that salvaging endogenous NmR is an integral part of NAD(+) metabolism. A balanced NmR salvage cycle is essential for calorie restriction-induced life span extension and stress resistance in yeast. Our results also suggest that partitioning of the pyridine nucleotide flux between the classical salvage cycle and the NmR salvage branch might be modulated by the NAD(+)-dependent Sir2 deacetylase. Furthermore, two novel deamidation steps leading to nicotinic acid mononucleotide and nicotinic acid riboside production are also uncovered that further underscore the complexity and flexibility of NAD(+) metabolism. In addition, utilization of extracellular nicotinamide mononucleotide requires prior conversion to NmR mediated by a periplasmic phosphatase Pho5. Conversion to NmR may thus represent a strategy for the transport and assimilation of large nonpermeable NAD(+) precursors. Together, our studies provide a molecular basis for how NAD(+) homeostasis factors confer metabolic flexibility.

  18. Shelf-life extension of convenience meat products sold in Indian supermarkets by radiation processing

    Science.gov (United States)

    Kanatt, Sweetie R.; Shobita Rao, M.; Chawla, S. P.; Sharma, Arun

    2010-12-01

    A variety of ready-to-cook meat products available in Indian supermarkets (mutton mince, chicken mince, chicken chunks, and chicken legs) were studied. The samples were irradiated (2.5 kGy), or left untreated as control, and stored at 0-3 °C for up to 21 days. The effect of irradiation on the microbiological, chemical, and sensory properties was evaluated at intervals during the storage period. Irradiated samples had a longer shelf-life at 0-3 °C compared with the corresponding non-irradiated samples. Fecal coliforms were eliminated by irradiation treatment. Radiation processed samples had lower counts of Staphylococcus spp. There were no significant organoleptic changes in irradiated samples stored at chilled temperatures.

  19. Shelf-life extension of convenience meat products sold in Indian supermarkets by radiation processing

    Energy Technology Data Exchange (ETDEWEB)

    Kanatt, Sweetie R.; Shobita Rao, M. [Food Technology Division, Bhabha Atomic Research Centre, Trombay, Mumbai 400 085 (India); Chawla, S.P., E-mail: spchawla@barc.gov.i [Food Technology Division, Bhabha Atomic Research Centre, Trombay, Mumbai 400 085 (India); Sharma, Arun [Food Technology Division, Bhabha Atomic Research Centre, Trombay, Mumbai 400 085 (India)

    2010-12-15

    A variety of ready-to-cook meat products available in Indian supermarkets (mutton mince, chicken mince, chicken chunks, and chicken legs) were studied. The samples were irradiated (2.5 kGy), or left untreated as control, and stored at 0-3 {sup o}C for up to 21 days. The effect of irradiation on the microbiological, chemical, and sensory properties was evaluated at intervals during the storage period. Irradiated samples had a longer shelf-life at 0-3 {sup o}C compared with the corresponding non-irradiated samples. Fecal coliforms were eliminated by irradiation treatment. Radiation processed samples had lower counts of Staphylococcus spp. There were no significant organoleptic changes in irradiated samples stored at chilled temperatures.

  20. Shelf-life extension of convenience meat products sold in Indian supermarkets by radiation processing

    International Nuclear Information System (INIS)

    Kanatt, Sweetie R.; Shobita Rao, M.; Chawla, S.P.; Sharma, Arun

    2010-01-01

    A variety of ready-to-cook meat products available in Indian supermarkets (mutton mince, chicken mince, chicken chunks, and chicken legs) were studied. The samples were irradiated (2.5 kGy), or left untreated as control, and stored at 0-3 o C for up to 21 days. The effect of irradiation on the microbiological, chemical, and sensory properties was evaluated at intervals during the storage period. Irradiated samples had a longer shelf-life at 0-3 o C compared with the corresponding non-irradiated samples. Fecal coliforms were eliminated by irradiation treatment. Radiation processed samples had lower counts of Staphylococcus spp. There were no significant organoleptic changes in irradiated samples stored at chilled temperatures.

  1. Extension of shelf life of paneer by sorbic acid and irradiation

    International Nuclear Information System (INIS)

    Singh, L.; Murali, H.S.; Sankaran, R.

    1991-01-01

    Paneer, an acid and heat coagulated milk product, is highly perishable because of high moisture (58-60%) and low acidity (pH 5.6-5.8). The product had 430 total plate count, 120 proteolytic bacteria, 170 lipolytic bacteria and 40 fungi/g of sample with a shelf life of few hr. Treatment with sorbic acid and/or gamma irradiation reduced the microbial load. Combination treatment of 0.10% sorbic acid in milk and irradiation of the product at 2.5 kGy preserved the paneer for 30 days at ambient temperature (25-35degC) with good acceptance. (author). 14 refs., 3 tabs., 2 figs

  2. Safe extension of red blood cell storage life at 4{degree}C

    Energy Technology Data Exchange (ETDEWEB)

    Bitensky, M.; Yoshida, Tatsuro

    1996-04-01

    The project sought to develop methods to extend the storage life of red blood cells. Extended storage would allow donor to self or autologous transfusion, expand and stabilize the blood supply, reduce the cost of medical care and eliminate the risk of transfusion related infections, including a spectrum of hepatitides (A, B and C) and HIV. The putative cause of red blood cell spoilage at 4 C has been identified as oxidative membrane damage resulting from deoxyhemoglobin and its denaturation products including hemichrome, hemin and Fe{sup 3+}. Trials with carbon monoxide, which is a stabilizer of hemoglobin, have produced striking improvement of red blood cell diagnostics for cells stored at 4 C. Carbonmonoxy hemoglobin is readily converted to oxyhemoglobin by light in the presence of oxygen. These findings have generated a working model and an approach to identify the best protocols for optimal red cell storage and hemoglobin regeneration.

  3. Irradiation of prepared meals for microbiological safety and shelf life extension

    International Nuclear Information System (INIS)

    Nketsia-Tabiri, K.; Adu-Gyamfi, A.; Apea Bah, F.

    2009-01-01

    Fourteen international ready meals prepared under the approved hazard analysis critical control point (HACCP) plan and two Ghanaian ready meals, waakye (co-boiled rice and cowpeas served with gravy, minimally processed vegetable salad, hydrated gari, fried fish and macaroni) and jollof rice (rice cooked in tomato sauce and served with gravy and beef tripe), were investigated with the view to enhancing microbiological safety and extending shelf life under chilled conditions. The microbiological count of the complete waakye meal exceeded the microbiological standard. The microbiological counts on meals prepared under the HACCP plan and the jollof rice meals were within the microbiological standards. The D 10 values for potential pathogens on waakye were 0.271 kGy for Escherichia coli, 0.325 kGy for Salmonella aureus and 0.440 kGy for Salmonella spp. while the D 10 values on jollof rice meal were 0.173 kGy, 0.260 kGy and 0.285 kGy, respectively. Challenge tests with the pathogens on one of the HACCP meals (poached chicken) or jollof rice suggested that the 3 kGy dose was sufficient for the elimination of the pathogens to ensure the microbiological safety of the meals and extended their shelf life under chilled storage for 28 days without significant effects on their sensory quality. Doses of 1 and 2 kGy did not affect the sensory quality of the rice and chicken/gravy but boiled carrots were unable to withstand a dose of more than 1 kGy. (author)

  4. Multiply controlled verbal operants: An analysis and extension to the picture exchange communication system

    OpenAIRE

    Bondy, Andy; Tincani, Matt; Frost, Lori

    2004-01-01

    This paper presents Skinner's (1957) analysis of verbal behavior as a framework for understanding language acquisition in children with autism. We describe Skinner's analysis of pure and impure verbal operants and illustrate how this analysis may be applied to the design of communication training programs. The picture exchange communication system (PECS) is a training program influenced by Skinner's framework. We describe the training sequence associated with PECS and illustrate how this sequ...

  5. Long-term operation experience with 2 ECR ion sources and planned extensions at HIT

    International Nuclear Information System (INIS)

    Winkelmann, T.; Cee, R.; Haberer, T.; Naas, B.; Peters, A.

    2012-01-01

    The HIT (Heidelberg Ion Beam Therapy Center) is the first treatment facility at a hospital in Europe where patients can be treated with protons and carbon ions. Since the commissioning starting in 2006 two 14.5 GHz electron cyclotron resonance ion sources are routinely used to produce a variety of ion beams from protons up to oxygen. The operating time is 330 days per year, our experience after three years of continuous operation will be presented. In the future a helium beam for patient treatment is requested, therefore a third ion source will be integrated. This third ECR source with a newly designed extraction system and a spectrometer line will be installed at a test-bench to commission and validate this section. Different test settings are foreseen to study helium operation as well as enhanced parameter sets for proton and carbon beams in combination with a modified beam transport line for higher transmission efficiency. An outlook to the possible integration scheme of the new ion source into the production facility will be discussed. The paper is followed by the associated poster. (authors)

  6. Improvement, extension and integration of operational decision support systems for nuclear emergency management (DSSNET)

    International Nuclear Information System (INIS)

    Raskob, W.

    2007-01-01

    The DSSNET network was established in October 2000 with the overall objective to create an effective and accepted framework for better communication and understanding between the community of institutions involved m operational off-site emergency management and the many and diverse Research and Technological Development (RTD) institutes further developing methods and tools in this area, in particular decision support systems (DSS), for making well informed and consistent judgements with respect to practical improvements of emergency response in Europe. 37 institutions from 21 countries of East and West Europe have been members of the network with about half of them responsible for operational emergency management. To stimulate the communication and feedback between the operational and the RTD community, problem-oriented emergency exercises were performed, which covered the various time phases of an accident and which extended from the near range to farther distances with frontier crossing transport of radionuclides. This paper concentrates on the five emergency exercises conducted in the frame of the project. (orig.)

  7. Recent Advances in Physical Post-Harvest Treatments for Shelf-Life Extension of Cereal Crops

    Science.gov (United States)

    Schmidt, Marcus; Zannini, Emanuele; Arendt, Elke K.

    2018-01-01

    As a result of the rapidly growing global population and limited agricultural area, sufficient supply of cereals for food and animal feed has become increasingly challenging. Consequently, it is essential to reduce pre- and post-harvest crop losses. Extensive research, featuring several physical treatments, has been conducted to improve cereal post-harvest preservation, leading to increased food safety and sustainability. Various pests can lead to post-harvest losses and grain quality deterioration. Microbial spoilage due to filamentous fungi and bacteria is one of the main reasons for post-harvest crop losses and mycotoxins can induce additional consumer health hazards. In particular, physical treatments have gained popularity making chemical additives unnecessary. Therefore, this review focuses on recent advances in physical treatments with potential applications for microbial post-harvest decontamination of cereals. The treatments discussed in this article were evaluated for their ability to inhibit spoilage microorganisms and degrade mycotoxins without compromising the grain quality. All treatments evaluated in this review have the potential to inhibit grain spoilage microorganisms. However, each method has some drawbacks, making industrial application difficult. Even under optimal processing conditions, it is unlikely that cereals can be decontaminated of all naturally occurring spoilage organisms with a single treatment. Therefore, future research should aim for the development of a combination of treatments to harness their synergistic properties and avoid grain quality deterioration. For the degradation of mycotoxins the same conclusion can be drawn. In addition, future research must investigate the fate of degraded toxins, to assess the toxicity of their respective degradation products. PMID:29565832

  8. Piping analysis for the life extension of Heavy Water Plant, Kota

    International Nuclear Information System (INIS)

    Mishra, Rajesh; Soni, R.S.; Kushwaha, H.S.; Venkat Raj, V.

    2001-02-01

    Heavy water production in India has achieved many milestones in the past. One of the most successfully running heavy water plant situated at Kota (Rajasthan) is on the verge of completion of its design life in near future. Heavy Water Plant, Kota is hydrogen sulfide based plant. Various exercises have been planned with an aim to assess the fatigue usage for the various components of these plants in order to extend their life. Considering the process parameters and past history of the plant performance, 25 process critical nozzle locations and connected piping systems are identified. Analyses have been carried out for these critical piping systems for mainly two kinds of loading, viz. sustained loads and the expansion loads. The static analysis has been carried out to find the induced stress levels due to sustained as well as thermal expansion loading as per the design code ANSI B31.3. Due consideration is given to the design corrosion allowance while evaluating the stresses due to sustained loads. At the locations where induced stresses (S 1 ) due to the sustained loads are exceeding the allowable limits (S h ), exercises have been carried out considering the reduced corrosion allowance value. This strategy is adopted due to the fact that the corrosion measurements carried out at site at various critical locations show a very low rate of corrosion. Where it is found that system is getting qualified with reduced corrosion allowance values, it is recommended to keep that location under periodic monitoring. The strategy adopted for carrying out the analysis for thermal expansion loading is to qualify the system as per the code allowable value (S a ). Where it is found that the stresses are more than the allowable value, credit of liberal allowable value as suggested in the code i.e., with the addition of the term (S h -S 1 ) to the allowable stress (S a ) value, has been taken. If at any location, it is found that the problem of high thermal stress still persists, the

  9. Feedback-assisted extension of the tokamak operating space to low safety factor

    Energy Technology Data Exchange (ETDEWEB)

    Hanson, J. M., E-mail: jmh2130@columbia.edu; Bialek, J. M.; Navratil, G. A.; Olofsson, K. E. J.; Shiraki, D.; Turco, F. [Department of Applied Mathematics and Applied Physics, Columbia University, New York, New York 10027-6900 (United States); Baruzzo, M.; Bolzonella, T.; Marrelli, L.; Martin, P.; Piovesan, P.; Piron, C.; Piron, L.; Terranova, D.; Zanca, P. [Consorzio RFX, Corso Stati Uniti 4, 35127 Padova (Italy); Hyatt, A. W.; Jackson, G. L.; La Haye, R. J.; Lanctot, M. J.; Strait, E. J. [General Atomics, P.O. Box 85608, San Diego, California 92186-5608 (United States); and others

    2014-07-15

    Recent DIII-D and RFX-mod experiments have demonstrated stable tokamak operation at very low values of the edge safety factor q(a) near and below 2. The onset of n = 1 resistive wall mode (RWM) kink instabilities leads to a disruptive stability limit, encountered at q(a) = 2 (limiter plasmas) and q{sub 95} = 2 (divertor plasmas). However, passively stable operation can be attained for q(a) and q{sub 95} values as low as 2.2. RWM damping in the q(a) = 2 regime was measured using active MHD spectroscopy. Although consistent with theoretical predictions, the amplitude of the damped response does not increase significantly as the q(a) = 2 limit is approached, in contrast with damping measurements made approaching the pressure-driven RWM limit. Applying proportional gain magnetic feedback control of the n = 1 modes has resulted in stabilized operation with q{sub 95} values reaching as low as 1.9 in DIII-D and q(a) reaching 1.55 in RFX-mod. In addition to being consistent with the q(a) = 2 external kink mode stability limit, the unstable modes have growth rates on the order of the characteristic wall eddy-current decay timescale in both devices, and a dominant m = 2 poloidal structure that is consistent with ideal MHD predictions. The experiments contribute to validating MHD stability theory and demonstrate that a key tokamak stability limit can be overcome with feedback.

  10. Feedback-assisted extension of the tokamak operating space to low safety factor

    International Nuclear Information System (INIS)

    Hanson, J. M.; Bialek, J. M.; Navratil, G. A.; Olofsson, K. E. J.; Shiraki, D.; Turco, F.; Baruzzo, M.; Bolzonella, T.; Marrelli, L.; Martin, P.; Piovesan, P.; Piron, C.; Piron, L.; Terranova, D.; Zanca, P.; Hyatt, A. W.; Jackson, G. L.; La Haye, R. J.; Lanctot, M. J.; Strait, E. J.

    2014-01-01

    Recent DIII-D and RFX-mod experiments have demonstrated stable tokamak operation at very low values of the edge safety factor q(a) near and below 2. The onset of n = 1 resistive wall mode (RWM) kink instabilities leads to a disruptive stability limit, encountered at q(a) = 2 (limiter plasmas) and q 95  = 2 (divertor plasmas). However, passively stable operation can be attained for q(a) and q 95 values as low as 2.2. RWM damping in the q(a) = 2 regime was measured using active MHD spectroscopy. Although consistent with theoretical predictions, the amplitude of the damped response does not increase significantly as the q(a) = 2 limit is approached, in contrast with damping measurements made approaching the pressure-driven RWM limit. Applying proportional gain magnetic feedback control of the n = 1 modes has resulted in stabilized operation with q 95 values reaching as low as 1.9 in DIII-D and q(a) reaching 1.55 in RFX-mod. In addition to being consistent with the q(a) = 2 external kink mode stability limit, the unstable modes have growth rates on the order of the characteristic wall eddy-current decay timescale in both devices, and a dominant m = 2 poloidal structure that is consistent with ideal MHD predictions. The experiments contribute to validating MHD stability theory and demonstrate that a key tokamak stability limit can be overcome with feedback

  11. Irradiation of prepared meals for microbiological safety and shelf-life extension

    Energy Technology Data Exchange (ETDEWEB)

    Nketsia-Tabiri, J; Adu-Gyamfi, A; Owusu-Biney, Alex; Apea Bah, F; Akomeah-Adjei, F [Biotechnology and Nuclear Agriculture Research Institute, Ghana Atomic Energy Commission, Legon (Ghana)

    2004-07-01

    Current trends suggest increasing world-wide demand for convenience foods such as prepared meals and those that require minimum preparation before consumption. In Ghana, the trend is the same with ready-to-eat or prepared meals mostly sold in the informal sector, playing a major role in meeting the nutritional needs of the people these meals are prepared on daily basis as in most developing countries. With increasing urbanization and rapid adoption of refrigeration for food preservation in developing countries, the demand for such foods in supermarkets should be expected. Over 90% of ready-to-eat meals prepared in Ghana are marketed under ambient conditions and have shelf-life of less than 12 hours. However, there are a few caterers who prepare cook-chill meals using hygienic and preventative approach (e.g. HACCP) in order to enhance the safety of their meals. Preliminary investigations have demonstrated that these cook-chill meals are potential sources of pathogenic bacteria and have been implicated in food-borne disease outbreaks. There is therefore the need to ensure the safety of ready-to-eat meals through effective processing such as irradiation.

  12. ANTIMICROBIAL SUBSTANCES: AN ALTERNATIVE APPROACH TO THE EXTENSION OF SHELF LIFE

    Directory of Open Access Journals (Sweden)

    Ekaterina A. Lukinova

    2017-01-01

    Full Text Available The problem of high losses of raw materials and products in the food industry is reviewed in the article. Brief lists of spoilage types as well as the available approaches to meat preservation are discussed including technological, physical and chemical. Natural antimicrobial substances are considered as alternative approaches, the existence of which has been known for more than 60 years. Antimicrobial peptides are the evolutionary ancient factor of innate immunity and are found in the cells and tissues of vertebrate and invertebrate animals, plants, fungi and bacteria. Present approaches to their classification, structure and mechanisms of action are discussed. The information from the Antimicrobial Peptide Database and the UniProt Protein Database is systematized in relation to the presence of antimicrobial substances in the tissues of pigs and cattle. Such parameters as the molecular weight, isoelectric point, charge, amino acid sequence and share a hydrophobic part, as well as a range of activities: antibacterial, antifungal, antiviral, antiparasitic, etc. are presented in the article. On the basis of the review, alternative sources of antimicrobial proteins and peptides are proposed as well as technology for shelf life prolonging.

  13. Studies on extension of shelf-life of rawa by gamma irradiation

    International Nuclear Information System (INIS)

    Sudha Rao, V.; Srirangarajan, A.N.; Kamat, A.S.; Adhikari, H.R.; Nair, P.M.

    1994-01-01

    Semolina, a wheat product, popularly termed as rawa, was packed in 500g pouches prepared individually from high density polyethylene (HDP), biaxially oriented polypropylene : low density polyethylene laminate (BOPP/LDP), polyester : low density polyethylene laminate (PET/LDP) and irradiated using a Cobalt-60 source at dose of 0.15 to 0.50 kGy. At the end of six months' storage at room temperature, the unirradiated rawa developed infestation, whereas the irradiated samples were completely free of any infestation, thereby indicating a complete destruction of all stages of the insects due to irradiation. There was no significant difference in the moisture content and the total bacterial as well as mould counts of the irradiated and unirradiated rawa. Gamma irradiation significantly decreased the gelatinization viscosity of rawa. In sensory evaluation tests, irradiated rawa scored the same on a 9-point Hedonic scale, thereby showing that overall acceptability of the rawa was not altered due to irradiation upto 0.25 kGy. Amongst the packaging materials used, BOPP/LDP was found to be better, because of its comparatively higher resistance to penetration by insects. Gamma irradiation at 0.25 kGy could thus be recommended for effectively extending the shelf-life of rawa, prepacked in pouches made from BOPP/LDP laminate, for six months. (author). 26 refs., 1 fig., 2 tabs

  14. Extension shelf life of batte by using hydrocolloids and gamma irradiation

    Directory of Open Access Journals (Sweden)

    Mervat M. Anwar

    2015-10-01

    Full Text Available Batte (is baked french one of the most baked coated most prevalent in the markets after the cake wrapping. Batte exposed generally two types of corruption which is occurring phenomenon of (anti-staling and corruption microbial (molds. In this study produced batte with an attempt to prolong the period of its validity by addition 1.5% hydrocolloids, (which is 0.5% sodium alginate, 0.5% k-carrageenan and 0.5% hydroxyl propyl methylcellulose (HPMC to hard wheat flour 72% (HWF to improve materials for mellowness and anti-staling, whereas batte exposed to gamma irradiation at doses 0.5, 1, 1.5, 2, 3 and 5 kGy to decrease microbial load. Hydrocolloids at 1.5% improved the rheological properties of dough farinogragh and aextensograph parameters. The hydrocolloids increase flexibility, rubber and freshness of batte to 24 days compared to 8 days in control sample. Thiobarbituric acid (T.B.A values at the end of storage at room temperature (ranged to 0.253–0.352 mg malonaldehyde/kg that were less than these mentioned by the Egyptian Standard. Also, gamma irradiation reduced the total bacterial count of batte product. Sensory evaluation of produced batte was done. The addition of 1.5% hydrocolloids and exposed to gamma irradiation had higher freshness and increase shelf-life for 20, 25, 30, 35 and 40 days against only 15 days for control sample.

  15. Shelf-life extension of bread by heat and irradiation treatment [Bangladesh

    International Nuclear Information System (INIS)

    Begum, F.; Siddique, A.K.; Choudhury, N.; Mollah, R.A.

    1994-01-01

    Bread slices were given irradiation treatment 0.5, 1.0, 1.5, and 2.0 KGy and heat treatment at 60 deg. C for 20 min to control mould growth. Mould growth was reladed at ambient temperature by 3, 4, 6 and 8 days after 0.5, 1.0, 1.5 and 2.0 KGy treatments, respectively, compared to 2 days in case of control sample and 3 days for heat treatment alone. Combination of heat with irradiation at 0.5, 1.0, 1.5 and 2.0 KGy retarded mould growth up to 4, 6, 7 an 9 days, respectively. Organoleptically, the irradiated bread slices were acceptable up to 3 to 6 days depending on the treatment. The combination method treated slices were acceptable up to 8 days. The application of radiation dose exceeding 2.0 KGy caused off flavour. Mild heat treatment and radiation in combination resulted in a synergistic antifungal effect and enhanced shelf-life of bread

  16. Extension of electron cyclotron heating at ASDEX Upgrade with respect to high density operation

    Directory of Open Access Journals (Sweden)

    Schubert Martin

    2017-01-01

    Full Text Available The ASDEX Upgrade electron cyclotron resonance heating operates at 105 GHz and 140 GHz with flexible launching geometry and polarization. In 2016 four Gyrotrons with 10 sec pulse length and output power close to 1 MW per unit were available. The system is presently being extended to eight similar units in total. High heating power and high plasma density operation will be a part of the future ASDEX Upgrade experiment program. For the electron cyclotron resonance heating, an O-2 mode scheme is proposed, which is compatible with the expected high plasma densities. It may, however, suffer from incomplete single-pass absorption. The situation can be improved significantly by installing holographic mirrors on the inner column, which allow for a second pass of the unabsorbed fraction of the millimetre wave beam. Since the beam path in the plasma is subject to refraction, the beam position on the holographic mirror has to be controlled. Thermocouples built into the mirror surface are used for this purpose. As a protective measure, the tiles of the heat shield on the inner column were modified in order to increase the shielding against unabsorbed millimetre wave power.

  17. Shelf-life extension of dried shrimps by irradiation and packaging techniques

    International Nuclear Information System (INIS)

    Warunee Varanyanond; Hirata, Takashi; Ishitani, Takasuke

    2000-01-01

    Dried shrimps were air-packaged or N2-packaged in the flexible pouch of oriented polypropylene (OPP), polyvinylidene chloride coated polypropylene (KOP) and ethylene vinyl alcohol copolymer (EVOH). The packages were irradiated with gamma ray from cobalt 60 at 3 and 8 kGy. Non-irradiated dried shrimps were used as a control. The samples were stored at 30 deg C and 70+-5 percent RH for 4 months. Non-enzymatic browning induced the discoloration of dried shrimps, and oxidation of astaxanthin proceeded after irradiation and during storage. The hunter color difference, delta E, of all the samples was increased, especially in the non-irradiated air-packages samples. The decrease in astaxanthin content was found in both air - and N2-packaged samples during storage. The number of microorganisms was reduced by irradiation dose of 3 and 8 kGy from 6.5 to 4.2 and 2.7 log CFU/g, respectively. The decreased concentration of O2 in the package also reduced the number of microorganisms. The air packaged dried shrimps in the OPP pouch deteriorated during storage. Shrinkage of the pouches and growth of halophilic bacteria on the surface of dried shrimps were found at a sub(w) of 0.75. The discoloration of dried shrimps in the OPP pouch was more significant than that in other pouches. Irradiation at 3 and 8 kGy in combination with packaging in KOP and EVOH pouches containing N2 atmosphere was one of the promising methods for prolonging shelf-life of dried shrimps at room temperature

  18. Shelf-life extension and quality improvement of minimally processed pear by combination treatments with irradiation

    International Nuclear Information System (INIS)

    Swailam, H.M.; Hammad, A.A.; Serag, M.S.; Mansour, F.A.; Abu El-Nour, S.A.

    2007-01-01

    Fresh-cut pears are not yet commercially available in Egypt. Thus, an attempt has been done to produce this minimally processed fruit manually at the laboratory. Fifteen samples of this manually prepared fresh-produce were evaluated for their microbiological quality. Total aerobic bacterial counts (TAPC) ranged from 7.5 x 10 to 3.5 x 10 cfu g-1, lactic acid bacteria (LAB) ranged from less than 10 to 3.2 x 10 cfu g-1; total mould and yeast counts (TM & Y) ranged from less than 10 to 5.3 x 10 cfu g-1 indicating good quality from the view point of microbiological population. Coliform bacteria and Escherichia coli were found in only 2 samples at levels of 20 to 43 and greater than 3 to 9 most probable numbers per gram (MPN g-1), respectively. On the other hand, Staphylococcus aureus was found in also 2 samples at levels of 102. Aeromonas hydrohila, Listeria monocytogenes and Salmonella spp., were not found in any of the samples. Fresh-cut pear s were dipped in water containing 2% ascorbic acid and 1% calcium lactate. The dipped fresh-cut pears were exposed to 1, 2 and 3 kGy. Dipping fresh-cut pears in 2% ascorbic acid plus 1% calcium lactate prevented browning and enhanced firmness during refrigeration storage. Irradiation dose of 2 kGy was the optimum, since it reduced TAPC by 99.58% and LAB and TM and Y to un-detectable level. These combined treatments extend the shelf life of fresh-cut pears without affecting their chemical, physical and sensorial quality attributes

  19. Determination of the remaining operational life of power plant components

    International Nuclear Information System (INIS)

    Eiden, H.; Vorwerk, K.; Graeff, D.; Hoff, E.

    1983-01-01

    The proceedings volume presents, in full wording, eight papers read at a TUEV Rheinland meeting in Johannesburg, South Africa, in August 1982. Subjects: Layout, quality assurance, service life analysis etc. of power plant components. (RW) [de

  20. Plasma-Assisted Life and Ecological Operating System (PALEOS)

    Data.gov (United States)

    National Aeronautics and Space Administration — Practical implementation of long-duration, human space missions will require robust, reliable, advanced life support systems. Such systems have been the subject of...

  1. [Recostruction of Extensive Acetabular Defects by Bioactive Glass Ceramics in Re-operations of Total Endoprostheses.].

    Science.gov (United States)

    Urban, K; Sponer, P

    1998-01-01

    The authors made 37 revisions on account of aseptic loosening of total endoprostheses of the hip joint using bioactive glass ceramics BAS-0 of Lasak Co. Prague. For reconstruction of large defects of the acetabulum they used a combination of different types of anti-protrusion metal baskets and granules from this material. In some instances the glass ceramic material was combined with autologous spongiosa. The longest follow-up period is over 4 years. In no instance loosening of the glass ceramic material occurred or its expulsion. All reconstructed sockets of hip joints were burdened by the patients from the third month after surgery. Harris Hip Score before operation was on average 52. During the last checkups of the patients it reached the level of 86. The authors mention complications associated with the procedure. The advantages and disadvantages of the procedure are discussed. Key words: bioactive glass ceramics, reconstruction of acetabular defect, aseptic loosening of endoprosthesis.

  2. Extension of market concept with market-driven optimisation of distribution system operation

    DEFF Research Database (Denmark)

    Wu, Qiuwei; Østergaard, Jacob

    2013-01-01

    not explicitly submitted, but derived from historic demand response behaviour. The locational prices resulting from this local optimisation were used to alleviate the congestion that would result from response to a global price, as issued within the EcoGrid EU real time market for system balancing services from......This report describes the development of a pricing mechanism for the alleviation of congestion at the 10kV distribution network level using demand flexibility in a 5-minute real-time market environment. Demand was incorporated into an OPF based market clearing procedure in which demand bids were...... distributed resources. A complementary direct control framework was developed to operate in tandem with the pricing mechanism to ensure the reliable alleviation of congestion...

  3. Fiber optics frequency comb enabled linear optical sampling with operation wavelength range extension.

    Science.gov (United States)

    Liao, Ruolin; Wu, Zhichao; Fu, Songnian; Zhu, Shengnan; Yu, Zhe; Tang, Ming; Liu, Deming

    2018-02-01

    Although the linear optical sampling (LOS) technique is powerful enough to characterize various advanced modulation formats with high symbol rates, the central wavelength of a pulsed local oscillator (LO) needs to be carefully set according to that of the signal under test, due to the coherent mixing operation. Here, we experimentally demonstrate wideband LOS enabled by a fiber optics frequency comb (FOFC). Meanwhile, when the broadband FOFC acts as the pulsed LO, we propose a scheme to mitigate the enhanced sampling error arising in the non-ideal response of a balanced photodetector. Finally, precise characterizations of arbitrary 128 Gbps PDM-QPSK wavelength channels from 1550 to 1570 nm are successfully achieved, when a 101.3 MHz frequency spaced comb with a 3 dB spectral power ripple of 20 nm is used.

  4. 29 CFR 784.108 - Operations not included in named operations on forms of aquatic “life.”

    Science.gov (United States)

    2010-07-01

    ... subject matter of the exemptions is concerned with “aquatic forms of animal and vegetable life,” the..., novelties, liquid glue, isinglass, pearl essence, and fortified or refined fish oil is not within these... 29 Labor 3 2010-07-01 2010-07-01 false Operations not included in named operations on forms of...

  5. An extension of the receiver operating characteristic curve and AUC-optimal classification.

    Science.gov (United States)

    Takenouchi, Takashi; Komori, Osamu; Eguchi, Shinto

    2012-10-01

    While most proposed methods for solving classification problems focus on minimization of the classification error rate, we are interested in the receiver operating characteristic (ROC) curve, which provides more information about classification performance than the error rate does. The area under the ROC curve (AUC) is a natural measure for overall assessment of a classifier based on the ROC curve. We discuss a class of concave functions for AUC maximization in which a boosting-type algorithm including RankBoost is considered, and the Bayesian risk consistency and the lower bound of the optimum function are discussed. A procedure derived by maximizing a specific optimum function has high robustness, based on gross error sensitivity. Additionally, we focus on the partial AUC, which is the partial area under the ROC curve. For example, in medical screening, a high true-positive rate to the fixed lower false-positive rate is preferable and thus the partial AUC corresponding to lower false-positive rates is much more important than the remaining AUC. We extend the class of concave optimum functions for partial AUC optimality with the boosting algorithm. We investigated the validity of the proposed method through several experiments with data sets in the UCI repository.

  6. LIFE Cost of Electricity, Capital and Operating Costs

    International Nuclear Information System (INIS)

    Anklam, T.

    2011-01-01

    Successful commercialization of fusion energy requires economic viability as well as technical and scientific feasibility. To assess economic viability, we have conducted a pre-conceptual level evaluation of LIFE economics. Unit costs are estimated from a combination of bottom-up costs estimates, working with representative vendors, and scaled results from previous studies of fission and fusion plants. An integrated process model of a LIFE power plant was developed to integrate and optimize unit costs and calculate top level metrics such as cost of electricity and power plant capital cost. The scope of this activity was the entire power plant site. Separately, a development program to deliver the required specialized equipment has been assembled. Results show that LIFE power plant cost of electricity and plant capital cost compare favorably to estimates for new-build LWR's, coal and gas - particularly if indicative costs of carbon capture and sequestration are accounted for.

  7. United States Food and Drug Administration and Department of Defense shelf-life extension program of pharmaceutical products: progress and promise.

    Science.gov (United States)

    Khan, Saeed R; Kona, Ravikanth; Faustino, Patrick J; Gupta, Abhay; Taylor, Jeb S; Porter, Donna A; Khan, Mansoor

    2014-05-01

    The Department of Defense (DoD)-United States Food and Drug Administration (FDA) shelf-life extension program (SLEP) was established in 1986 through an intra-agency agreement between the DoD and the FDA to extend the shelf life of product nearing expiry. During the early stages of development, special attention was paid to program operation, labeling requirements, and the cost benefits associated with this program. In addition to the substantial cost benefits, the program also provides the FDA's Center for Drug Evaluation and Research with significant scientific understanding and pharmaceutical resource. As a result of this unique resource, numerous regulatory research opportunities to improve public health present themselves from this distinctive scientific database, which includes examples of products shelf life, their long-term stability issues, and various physical and chemical tests to identify such failures. The database also serves as a scientific resource for mechanistic understanding and identification of test failures leading to the development of new formulations or more robust packaging. It has been recognized that SLEP is very important in maintaining both national security and public welfare by confirming that the stockpiled pharmaceutical products meet quality standards after the "expiration date" assigned by the sponsor. SLEP research is an example of regulatory science that is needed to best ensure product performance past the original shelf life. The objective of this article is to provide a brief history and background and most importantly the public health benefits of the SLEP. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.

  8. Application of the combined cycle LWR-gas turbine to PWR for NPP life extension, safety upgrade and improving economy

    International Nuclear Information System (INIS)

    Kuznetsov, Yu.N.; Gabaraev, B.A.

    2002-01-01

    Full text: The unconventional technology to extend the lifetime for the NPPs now in operation and make a construction of new NPPs cheaper - erection of steam-gas toppings to the nuclear power units - is considered in the paper. Application of the steam-gas toppings permits through reducing power of ageing reactors to extend lifetime of nuclear power unit, enhance its safety and at the same time to keep full load operation of NPP turbine and other balance-of-plant equipment. Proposed technology is examined for Russian VVER-440 reactor as an example and, also, as a pilot project, for Russian boiling VK-50 reactor now in operation Application of the steam-gas topping permits: extend the service life of ageing VVER-440 reactor by 10...15 years; use the turbine and other NPP balance-of-plant equipment at full power; increase the efficiency of combined cycle up to 48% and more; enhance the safety of NPP operation; utilize NPP balance-of-plant equipment after reactor decommissioning; perform the cost-effective operation in maneuvering modes; increase capacity factor of the plant. The construction of pilot project on the basis of the VK-50 reactor will allow not only to demonstrate new technology but also to attain appreciable economic effect including that obtained due to using the available reserves of the NPP turbine. (author)

  9. Combined effect of antimicrobial coating and gamma irradiation on shelf-life extension of pre-cooked shrimp (Penaeus spp.)

    International Nuclear Information System (INIS)

    Ouattara, B.; Sabato, S.F.; Lacroix, M.

    2001-01-01

    The present study was conducted to evaluate the combined effect of low-dose gamma irradiation and antimicrobial coating on the shelf life of pre-cooked shrimp (Penaeus spp.). Antimicrobial coatings were obtained by incorporating various concentrations of thyme oil and trans-cinnamaldehyde in coating formulations prepared from soy or whey protein isolates. Coated shrimps were stored at 4±1°C under aerobic conditions and were periodically evaluated for aerobic plate counts (APCs) and Pseudomonas putida. Sensory evaluations were performed for appearance, odor, and taste using a hedonic test. Results showed that gamma irradiation and coating treatments had synergistic effects (p < = 0.05) in reducing the APCs and P. putida with at least a 12-day extension of shelf life. Without irradiation, the inhibitory effects of the coating solutions were closely related to the concentration of thyme oil and trans-cinnamaldehyde. No detrimental effects of gamma irradiation on organoleptic parameters (appearance, odor, and taste) were observed. However, incorporation of thyme oil and trans-cinnamaldehyde reduced the acceptability scores for taste and odor

  10. Effects of electron beam irradiation combined with hot water immersion treatment for shelf life extension of bananas

    International Nuclear Information System (INIS)

    Russly Abdul Rahman

    1996-01-01

    A study of the effects of minimal processing treatments, both individually or in combinations, was carried out in order to extend the shelf life and to improve the quality of bananas. Pre climacteric bananas at light full three-quarter grade, were either treated with hot water immersion for 1-30 min at 45-55 degree C, or irradiated with electron beams (2.0 MeV, Van de Graaff accelerator), to a dose of 0.1-1.5 kGy. All fruit was stored at 21 ± 1 degree C and relative humidity of 85-95 %. There was no significant delay in ripening of fruit treated with hot water immersion at the above temperatures. Some damage to fruit particularly peel scalding at ends occurred at the higher temperatures (>50 degree C). The 50 degree C, 5 minutes immersion was selected for further study. Irradiation to 0.1-0.3 kGy delayed the ripening (up to 3 days) without affecting fruit quality. Doses greater than 0.4 kGy resulted in extensive discoloration and fruit splitting. No significant differences could be detected organoleptically between bananas irradiated at 0.15 kGy and the control. Results of the physico-chemical attributes of the bananas were reported for fruits at colour stage 5 and after 10 and 15 days of storage. The combination treatment of hot water immersion and irradiation at the above settings further extended the shelf life of the banana fruits

  11. Mold spoilage of bread and its biopreservation: A review of current strategies for bread shelf life extension.

    Science.gov (United States)

    Axel, Claudia; Zannini, Emanuele; Arendt, Elke K

    2017-11-02

    Microbial spoilage of bread and the consequent waste problem causes large economic losses for both the bakery industry and the consumer. Furthermore the presence of mycotoxins due to fungal contamination in cereals and cereal products remains a significant issue. The use of conventional chemical preservatives has several drawbacks, necessitating the development of clean-label alternatives. In this review, we describe current research aiming to extend the shelf life of bread through the use of more consumer friendly and ecologically sustainable preservation techniques as alternatives to chemical additives. Studies on the in situ-production/-expression of antifungal compounds are presented, with special attention given to recent developments over the past decade. Sourdough fermented with antifungal strains of lactic acid bacteria (LAB) is an area of increasing focus and serves as a high-potential biological ingredient to produce gluten-containing and gluten-free breads with improved nutritional value, quality and safety due to shelf-life extension, and is in-line with consumer's demands for more products containing less additives. Other alternative biopreservation techniques include the utilization of antifungal peptides, ethanol and plant extracts. These can be added to bread formulations or incorporated in antimicrobial films for active packaging (AP) of bread. This review outlines recent progress that has been made in the area of bread biopreservation and future perspectives in this important area.

  12. Shelf Life Extension of Tomato Paste Through Organoleptically Acceptable Concentration of Betel Leaf Essential Oil Under Accelerated Storage Environment.

    Science.gov (United States)

    Basak, Suradeep

    2018-05-01

    This study was attempted with two objectives: (1) to find an acceptable concentration of betel leaf essential oil (BLEO) based on sensory evaluation that can be employed in tomato paste; (2) to evaluate the effect of the acceptable concentration of BLEO in the paste during accelerated storage under 89 ± 1.2% RH at 39 ± 1 °C. Linguistic data obtained from sensory evaluation of tomato paste treated with 4 different concentrations of BLEO were analyzed using fuzzy logic approach. The organoleptically acceptable concentration was determined to be 0.25 mg/g of BLEO in tomato paste. The effect of the selected concentration of BLEO on different physicochemical and microbial attributes of tomato paste during accelerated storage was studied. Untreated tomato paste was found to have 12% less total antioxidant capacity than treated paste at the end of storage. Based on a * /b * value in CIELAB color space, the BLEO treated paste efficiently extended the shelf life by 14 days with respect to untreated paste samples under accelerated storage conditions. BLEO comes with a tag contributing to green consumerism, and its application as food preservative is no less than a value addition to the product. Essential oil is considered to have promising potential as an alternative food preservative, and its use is practically possible if they could overcome the sensory barrier, while retaining the preservative potency. The importance of identifying the sensory attributes for commercial success of essential oil treated food product was considered in this study. It contributes to the potency of organoleptically acceptable concentration of BLEO in shelf life extension of tomato paste under accelerated storage conditions. At industrial level, the estimated shelf life of treated tomato paste can be increased by incorporating more hurdles alongside BLEO. © 2018 Institute of Food Technologists®.

  13. Circadian clocks govern calorie restriction-mediated life span extension through BMAL1- and IGF-1-dependent mechanisms.

    Science.gov (United States)

    Patel, Sonal A; Chaudhari, Amol; Gupta, Richa; Velingkaar, Nikkhil; Kondratov, Roman V

    2016-04-01

    Calorie restriction (CR) increases longevity in many species by unknown mechanisms. The circadian clock was proposed as a potential mediator of CR. Deficiency of the core component of the circadian clock-transcriptional factor BMAL1 (brain and muscle ARNT [aryl hydrocarbon receptor nuclear translocator]-like protein 1)-results in accelerated aging. Here we investigated the role of BMAL1 in mechanisms of CR. The 30% CR diet increased the life span of wild-type (WT) mice by 20% compared to mice on anad libitum(AL) diet but failed to increase life span ofBmal1(-/-)mice. BMAL1 deficiency impaired CR-mediated changes in the plasma levels of IGF-1 and insulin. We detected a statistically significantly reduction of IGF-1 in CRvs.AL by 50 to 70% in WT mice at several daily time points tested, while inBmal1(-/-)the reduction was not significant. Insulin levels in WT were reduced by 5 to 9%, whileBmal1(-/-)induced it by 10 to 35% at all time points tested. CR up-regulated the daily average expression ofBmal1(by 150%) and its downstream target genesPeriods(by 470% forPer1and by 130% forPer2). We propose that BMAL1 is an important mediator of CR, and activation of BMAL1 might link CR mechanisms with biologic clocks.-Patel, S. A., Chaudhari, A., Gupta, R., Velingkaar, N., Kondratov, R. V. Circadian clocks govern calorie restriction-mediated life span extension through BMAL1- and IGF-1-dependent mechanisms. © FASEB.

  14. Operations planning simulation model extension study. Volume 1: Long duration exposure facility ST-01-A automated payload

    Science.gov (United States)

    Marks, D. A.; Gendiellee, R. E.; Kelly, T. M.; Giovannello, M. A.

    1974-01-01

    Ground processing and operation activities for selected automated and sortie payloads are evaluated. Functional flow activities are expanded to identify payload launch site facility and support requirements. Payload definitions are analyzed from the launch site ground processing viewpoint and then processed through the expanded functional flow activities. The requirements generated from the evaluation are compared with those contained in the data sheets. The following payloads were included in the evaluation: Long Duration Exposure Facility; Life Sciences Shuttle Laboratory; Biomedical Experiments Scientific Satellite; Dedicated Solar Sortie Mission; Magnetic Spectrometer; and Mariner Jupiter Orbiter. The expanded functional flow activities and descriptions for the automated and sortie payloads at the launch site are presented.

  15. Technical Evaluation on Ageing Management in Nuclear Power in Japan -Life Extension over 40 Years at Japanese Nuclear Power Plants-

    International Nuclear Information System (INIS)

    Tanaka, H.; Iwasaki, M.; Miyama, S.

    2012-01-01

    The Japanese commercial reactors have accumulated more than 40 years operating experience since Tsuruga-1 started commercial operation in March 1970. However, the severe accident occurred at Fukushima nuclear power plants triggered by East Japan Great Earthquake on March 11 last year. The facts that all the reactors having experienced core meltdown had operated for more than 30 years and Fukushima Daiichi unit 1 had just received the approval for its 40th year Ageing Management Technical Evaluation results from the Japanese government caused increasing distrust among the public in nuclear power plants operating for a long period of time. However, investigations of the accident conducted so far have not revealed any evidence that ageing degradation accelerated the accident. In addition, the analysis of seismic accelerations of the earthquake did not show that any component function was lost due to the accident. Considering these facts, I would like to discuss the issues to be continuously pursued and to be additionally implemented as part of the plat life management activities. In addition, I will introduce the efforts made by the Japanese utilities following the accident. (author)

  16. Improvement of life insurance-related accounting opera-tions within the New Economy

    Directory of Open Access Journals (Sweden)

    Marinică DOBRIN

    2010-06-01

    Full Text Available This paper outlines the life insurance-related accounting operations, in consideration to the harmonization of the Romanian legislation with the International Financial Reporting Standards. The main accounting operations specific to the life insurance sector include: accounting of revenues and expenses derived from life insurance operations (recording the premiums written, recording the payment of insurance premiums, termination of insurance policy, recording the compensation expenses, accounting of operations related to the setting up and using the technical reserves for life insurance (general principles, accounting of premium reserves, accounting of loss reserve, accounting of the reserve for benefits and discounts, accounting of mathematical reserve, accounting of other life insurance-related technical reserves.

  17. Coherent Synchrotron Radiation A Simulation Code Based on the Non-Linear Extension of the Operator Splitting Method

    CERN Document Server

    Dattoli, Giuseppe

    2005-01-01

    The coherent synchrotron radiation (CSR) is one of the main problems limiting the performance of high intensity electron accelerators. A code devoted to the analysis of this type of problems should be fast and reliable: conditions that are usually hardly achieved at the same time. In the past, codes based on Lie algebraic techniques have been very efficient to treat transport problem in accelerators. The extension of these method to the non-linear case is ideally suited to treat CSR instability problems. We report on the development of a numerical code, based on the solution of the Vlasov equation, with the inclusion of non-linear contribution due to wake field effects. The proposed solution method exploits an algebraic technique, using exponential operators implemented numerically in C++. We show that the integration procedure is capable of reproducing the onset of an instability and effects associated with bunching mechanisms leading to the growth of the instability itself. In addition, parametric studies a...

  18. Increased iron supplied through Fet3p results in replicative life span extension of Saccharomyces cerevisiae under conditions requiring respiratory metabolism.

    Science.gov (United States)

    Botta, Gabriela; Turn, Christina S; Quintyne, Nicholas J; Kirchman, Paul A

    2011-10-01

    We have previously shown that copper supplementation extends the replicative life span of Saccharomyces cerevisiae when grown under conditions forcing cells to respire. We now show that copper's effect on life span is through Fet3p, a copper containing enzyme responsible for high affinity transport of iron into yeast cells. Life span extensions can also be obtained by supplementing the growth medium with 1mM ferric chloride. Extension by high iron levels is still dependent on the presence of Fet3p. Life span extension by iron or copper requires growth on media containing glycerol as the sole carbon source, which forces yeast to respire. Yeast grown on glucose containing media supplemented with iron show no extension of life span. The iron associated with cells grown in media supplemented with copper or iron is 1.4-1.8 times that of cells grown without copper or iron supplementation. As with copper supplementation, iron supplementation partially rescues the life span of superoxide dismutase mutants. Cells grown with copper supplementation display decreased production of superoxide as measured by dihydroethidium staining. Copyright © 2011 Elsevier Inc. All rights reserved.

  19. Evaluation of nutritional and biochemical properties of litchi (Litchi chinensis) and its quarantine treatment and shelf-life extension using radiation technology

    International Nuclear Information System (INIS)

    Hajare, Sachin N.; Saxena, Sudhanshu; Kumar, Sanjeev; Wadhawan, Surbhi; More, Varsha; Mishra, B.B.; Parte, Madan Narayan; Gautam, Satyendra; Sharma, Arun

    2009-01-01

    Combination of gamma irradiation and dip treatment on shelf life extension of two major cultivars of litchi namely, Shahi, and China was studied for improving market availability of the fruit and to overcome quarantine barrier for international trade. An extension in shelf life up to 28 days was achieved at 4 deg C, whereas, control fruits last around 10 days at 4 deg C. Physicochemical and nutritional parameters such as moisture content, acidity (pH), total soluble solid, total and reducing sugars, vitamin C content, phenolics, flavonoids, antioxidant activities, browning associated enzymatic activities, microbiological and sensory attributes were studied during the storage period. It was observed that low dose of gamma radiation did not affect significantly any of these parameters. Further, a novel combination dip treatment was developed which resulted in shelf life extension up to 60 days with complete inhibition of pericarp browning. (author)

  20. Effect of telescopic distal extension removable partial dentures on oral health related quality of life and maximum bite force: A preliminary cross over study.

    Science.gov (United States)

    Elsyad, Moustafa Abdou; Mostafa, Aisha Zakaria

    2018-01-01

    This cross over study aimed to evaluate the effect of telescopic distal extension removable partial dentures on oral health related quality of life and maximum bite force MATERIALS AND METHODS: Twenty patients with complete maxillary edentulism and partially edentulous mandibles with anterior teeth only remaining were selected for this cross over study. All patients received complete maxillary dentures and mandibular partial removable dental prosthesis (PRDP, control). After 3 months of adaptation, PRDP was replaced with conventional telescopic partial dentures (TPD) or telescopic partial dentures with cantilevered extensions (TCPD) in a quasi-random method. Oral health related quality of life (OHRQoL) was measured using OHIP-14 questionnaire and Maximum bite force (MBF) was measured using a bite force transducer. Measurements were performed 3 months after using each of the following prostheses; PRDP, TPD, and TCPD. TCPD showed the OHIP-14 lowest scores (i.e., the highest patient satisfaction with their OHRQoL), followed by TPD, and PRDP showed the highest OHIP-14 scores (i.e., the lowest patient satisfaction with OHRQoL). TCPD showed the highest MBF (70.7 ± 3.71), followed by TPD (57.4 ± 3.43) and the lowest MBF (40.2 ± 2.20) was noted with PRDP. WITHIN The Limitations of This Study, Mandibular Telescopic Distal Extension Removable Partial Dentures with Cantilevered Extensions Were Associated with Improved Oral Health Related Quality of Life and Maximum Bite Force Compared to Telescopic or Conventional PRDP. Telescopic distal extension removable prostheses is an esthetic restoration in partially edentulous patients with free end saddle. This article describes the addition of cantilevered extensions of this prosthesis. The results showed that telescopic distal extension removable prostheses with cantilevered extensions were associated with improved oral health related quality of life and maximum bite force compared to telescopic or conventional RPDs

  1. Integrated Life Cycle Management: A Strategy for Plants to Extend Operating Lifetimes Safely with High Operational Reliability

    International Nuclear Information System (INIS)

    Esselman, Thomas; Bruck, Paul; Mengers, Charles

    2012-01-01

    Nuclear plant operators are studying the possibility of extending their existing generating facilities operating lifetime to 60 years and beyond. Many nuclear plants have been granted licenses to operate their facilities beyond the original 40 year term; however, in order to optimize the long term operating strategies, plant decision-makers need a consistent approach to support their options. This paper proposes a standard methodology to support effective decision-making for the long-term management of selected station assets. Methods detailed are intended to be used by nuclear plant site management, equipment reliability personnel, long term planners, capital asset planners, license renewal staff, and others that intend to look at operation between the current time and the end of operation. This methodology, named Integrated Life Cycle Management (ILCM), will provide a technical basis to assist decision makers regarding the timing of large capital investments required to get to the end of operation safely and with high plant reliability. ILCM seeks to identify end of life cycle failure probabilities for individual plant large capital assets and attendant costs associated with their refurbishment or replacement. It will provide a standard basis for evaluation of replacement and refurbishment options for these components. ILCM will also develop methods to integrate the individual assets over the entire plant thus assisting nuclear plant decision-makers in their facility long term operating strategies. (author)

  2. Edible moisture barriers: how to assess of their potential and limits in food products shelf-life extension?

    Science.gov (United States)

    Bourlieu, C; Guillard, V; Vallès-Pamiès, B; Guilbert, S; Gontard, N

    2009-05-01

    Control of moisture transfer inside composite food products or between food and its environment remains today a major challenge in food preservation. A wide rage of film-forming compounds is now available and facilitates tailoring moisture barriers with optimized functional properties. Despite these huge potentials, a realistic assessment of the film or coating efficacy is still critical. Due to nonlinear water sorption isotherms, water-dependent diffusivities, and variations of physical state, modelling transport phenomena through edible barriers is complex. Water vapor permeability can hardly be considered as an inherent property of films and only gives a relative indication of the barrier efficacy. The formal or mechanistic models reported in literature that describe the influence of testing conditions on the barrier properties of edible films are reviewed and discussed. Most of these models have been validated on a narrow range of conditions. Conversely, few original predictive models based on Fick's Second Law have been developed to assess shelf-life extension of food products including barriers. These models, assuming complex and realistic hypothesis, have been validated in various model foods. The development of nondestructive methods of moisture content measurement should speed up model validation and allow a better comprehension of moisture transfer through edible films.

  3. Shelf-life extension of minimally processed and gamma irradiated red beet (Beta vulgaris ssp. vulgaris L.), Cv. early wonder

    International Nuclear Information System (INIS)

    Hernandes, Nilber Kenup; Vital, Helio de Carvalho; Coneglian, Regina Celi Cavestre

    2007-01-01

    This work investigated the effects of gamma irradiation on the shelf-life extension and safety of minimally processed red beet (Beta vulgaris ssp. vulgaris L.) by performing microbiological, chemical and sensory analyses. Red beets were harvested 73 days after transplanting and their tuberous parts were minimally processed and separated in two groups: control (non-irradiated) and irradiated (0.5, 1.0 and 1.5 kGy). Tests for Salmonella sp., total and fecal coliforms, total count of aerobic mesophilic and lactic-acid bacteria were performed during the 21-day storage at 8 deg C. They indicated that the samples irradiated with 1.0 and 1.5 kGy remained in good conditions throughout storage while the unirradiated samples did not last 7 days. Chemical analyses indicated that the concentrations of vitamins B1 and B2 were not affected by irradiation. In contrast the amounts of fructose and glucose increased during storage while the one for sucrose decreased. In addition four series of sensory evaluations including appearance and aroma indicated that the samples irradiated with 1.0 and 1.5 kGy remained good for consumption for 20 days. Therefore it was concluded that the use of the doses of 1.0 and 1.5 kGy produced the best effects on the conservation of the samples without harming the sensory characteristics and nutritional constituents tested. (author)

  4. A review of methionine dependency and the role of methionine restriction in cancer growth control and life-span extension.

    Science.gov (United States)

    Cavuoto, Paul; Fenech, Michael F

    2012-10-01

    Methionine is an essential amino acid with many key roles in mammalian metabolism such as protein synthesis, methylation of DNA and polyamine synthesis. Restriction of methionine may be an important strategy in cancer growth control particularly in cancers that exhibit dependence on methionine for survival and proliferation. Methionine dependence in cancer may be due to one or a combination of deletions, polymorphisms or alterations in expression of genes in the methionine de novo and salvage pathways. Cancer cells with these defects are unable to regenerate methionine via these pathways. Defects in the metabolism of folate may also contribute to the methionine dependence phenotype in cancer. Selective killing of methionine dependent cancer cells in co-culture with normal cells has been demonstrated using culture media deficient in methionine. Several animal studies utilizing a methionine restricted diet have reported inhibition of cancer growth and extension of a healthy life-span. In humans, vegan diets, which can be low in methionine, may prove to be a useful nutritional strategy in cancer growth control. The development of methioninase which depletes circulating levels of methionine may be another useful strategy in limiting cancer growth. The application of nutritional methionine restriction and methioninase in combination with chemotherapeutic regimens is the current focus of clinical studies. Copyright © 2012 Elsevier Ltd. All rights reserved.

  5. A Fault-Tolerant HPC Scheduler Extension for Large and Operational Ensemble Data Assimilation:Application to the Red Sea

    KAUST Repository

    Toye, Habib

    2018-04-26

    A fully parallel ensemble data assimilation and forecasting system has been developed for the Red Sea based on the MIT general circulation model (MITgcm) to simulate the Red Sea circulation and the Data Assimilation Research Testbed (DART) ensemble assimilation software. An important limitation of operational ensemble assimilation systems is the risk of ensemble members’ collapse. This could happen in those situations when the filter update step imposes large corrections on one, or more, of the forecasted ensemble members that are not fully consistent with the model physics. Increasing the ensemble size is expected to improve the assimilation system performances, but obviously increases the risk of members’ collapse. Hardware failure or slow numerical convergence encountered for some members should also occur more frequently. In this context, the manual steering of the whole process appears as a real challenge and makes the implementation of the ensemble assimilation procedure uneasy and extremely time consuming.This paper presents our efforts to build an efficient and fault-tolerant MITgcm-DART ensemble assimilation system capable of operationally running thousands of members. Built on top of Decimate, a scheduler extension developed to ease the submission, monitoring and dynamic steering of workflow of dependent jobs in a fault-tolerant environment, we describe the assimilation system implementation and discuss in detail its coupling strategies. Within Decimate, only a few additional lines of Python is needed to define flexible convergence criteria and to implement any necessary actions to the forecast ensemble members, as for instance (i) restarting faulty job in case of job failure, (ii) changing the random seed in case of poor convergence or numerical instability, (iii) adjusting (reducing or increasing) the number of parallel forecasts on the fly, (iv) replacing members on the fly to enrich the ensemble with new members, etc.We demonstrate the efficiency

  6. Safety margin evaluation concepts for plant Up rates and life extension. Results of the OECD/NEA/CSNI working group on Safety Margin Action Plan (SMAP)

    International Nuclear Information System (INIS)

    Belac, J

    2006-01-01

    This presentation summarizes results of the OECD/NEA/CSNI working group on Safety Margin Action Plan (SMAP) aimed to develop generalized safety margin concept and means of its quantification for the process of evaluating plant safety in the frame of plant life extension and power up rating activities to be used by OECD member countries. (author)

  7. Plant life (PLIM) and ageing management (AM) in German NPPs. Prerequisite for long term operation (LTO)

    International Nuclear Information System (INIS)

    Schuler, X.

    2010-01-01

    The German nuclear power plants have implemented a comprehensive ageing management (AM) in recent years. Within AM the quality of safety relevant systems, structures and components (SSC) has to be assessed, regularly. Thus the safety margin can be verified (and demonstrated) at every stage of operation and if necessary it can be reacted in time. The effort of this assessment depends on the requirements regarding the SSC. Therefore, it was appropriate to introduce groups of SSCs related to these requirements. Three groups have been defined: - group 1: integrity of SSC in this group has to be guaranteed, pro-actively; - group 2: systematic failures have to be prevented (reactive approach); - group 3: failures are without consequences (reactive approach). The ''Integrity Concept'' is applied to those mechanical systems and components that must not fail (grp. 1). This pro-active procedure bases on the German basis safety concept that was developed in the 1980s and addresses SSC in operation, specially. This procedure was included in the German nuclear code KTA in 1999. Following this procedure a required quality of the SSC is established during design and manufacture (production); in operation possible damage mechanisms have to be under control. This is done by extensive monitoring of the causes (i.e. loads, water chemistry), regular evaluation and assessment of the monitoring results and redundant monitoring of the consequences of possible damage mechanisms. The assessment has to be performed for each component, specifically, taking into account all available information and changes of knowledge, too. The quality of the second group of SSC has to be maintained, this means the consequences of possible damage mechanisms have to be kept under control; thus the possibility of a failure is minimized. To maintain quality (integrity and function) there are adequate surveillance methods like inspections, function tests and maintenance actions that are applied regularly (time

  8. Extension of the African regional co-operative agreement for research, development and training related to nuclear science and technology (AFRA)

    International Nuclear Information System (INIS)

    1999-01-01

    The document presents the status of acceptances as of 16 March 1999 of the extension of the African Co-operative Agreement for Research, Development and Training Related to Nuclear Science and Technology (AFRA) which entered into force on 4 April 1995, upon expiration of the original Agreement, and will remain in force for an additional period of 5 years, i.e. through 3 April 2000. There are 25 States which notified the acceptance of the Agreement extension

  9. Extension of the African Regional Co-operative Agreement for Research, Development and Training Related to Nuclear Science and Technology (AFRA)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-11-23

    The document presents the status of acceptances as of 6 October 1999 of the extension of the African Co-operative Agreement for Research, Development and Training Related to Nuclear Science and Technology (AFRA) which entered into force on 4 April 1995, upon expiration of the original Agreement, and will remain in force for an additional period of 5 years, i.e. through 3 April 2000. There are 26 States which notified the acceptance of the Agreement extension.

  10. Extension of the African regional co-operative agreement for research, development and training related to nuclear science and technology (AFRA)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-04-19

    The document presents the status of acceptances as of 16 March 1999 of the extension of the African Co-operative Agreement for Research, Development and Training Related to Nuclear Science and Technology (AFRA) which entered into force on 4 April 1995, upon expiration of the original Agreement, and will remain in force for an additional period of 5 years, i.e. through 3 April 2000. There are 25 States which notified the acceptance of the Agreement extension

  11. Life extension activities and modernization strategies for instrumentation ampersand control systems of research and power reactors in India

    International Nuclear Information System (INIS)

    Chaganty, S.P.; Bairi, B.R.

    1993-01-01

    Based on three and half decades of experience gained in the operation and maintenance of Instrumentation and Control Systems of nuclear reactors in India, specific investigations were made to understand various aspects of aging. The analysis of the failure rates of various instruments, plant outage figures and obsolescence of components have necessitated the replacement of instrumentation to improve the reliability and performance. The aging models available were used to determine the extent of performance degradation and to formulate maintenance strategies. The nuclear instrumentation of the aging research reactors at Bhabha Atomic Research Centre (BARC) has been replaced with high reliability equipment using modern integrated circuits. This has resulted in an improvement in the mean time between failure (MTBF) by a factor of five. The neutronic instrumentation of Fast Breeder Test Reactor (FBTR) at Madras is currently being upgraded with the introduction of microprocessor based safety units for reactivity computation and online testing of safety logic with Fine Impulse Technique. The operating experience has also indicated the necessity of developing online surveillance methods and status monitoring of various systems to detect aging. Online cable insulation measurement technique and noise analysis methods for vibration monitoring have been developed. Campbell method of signal processing has been successfully used in extending the useful life of Local Power Range monitors in the Boiling Water Reactor at Tarapur. In order to improve reliability, accuracy and provide efficient man machine interface, microprocessor based systems with online testing features have been installed in power reactors. These include the high performance reactor regulating system and centralised radiation monitoring systems commissioned at Kakrapara power station. The paper describes the above systems and the modernization strategies for nuclear instrumentation and control

  12. Life Limiting Issues for Long Term Operation of Nuclear Power Plants

    International Nuclear Information System (INIS)

    Esselman, Thomas; Gaertner, John

    2012-01-01

    This paper reports on a study which identified and characterized life limiting issues for consideration by nuclear plant owners in their decision to extend plant life or seek subsequent license renewal. As nuclear plants operate for longer periods, the risk that a condition in the plant or an event that occurs, at the plant or elsewhere, will cause a plant owner not to extend plant life increases. The Fukushima accident has made this concept concrete. This paper defines 'Life Limiting' concepts for nuclear plants. It identifies the highest risk conditions and events that may limit duration of continued operation in nuclear plants and employs a survey to prioritize these concerns. Methods for evaluating these risks and changing the capability of systems, structures, and components (SSC) to reduce and manage this risk in long term operation are presented. Integrated obsolescence -the existence of an accumulation of events or condition that can threaten long term operation- is discussed. Many of the life limiting conditions or events may be controllable by early identification, recognition, and mitigation of the potential threat. The recognition of conditions may allow measures to be taken to mitigate the condition. Recognition of the potential for events that may be life limiting may allow actions to be taken that will minimize the likelihood or consequences of the event. These actions may include enhanced research on the expected behavior of the SSC, risk assessment and management, and enhanced monitoring and aging management at the plant. (author)

  13. Application of the Combined Cycle LWR-Gas Turbine to PWR for NPP Life Extension Safety Upgrade and Improving Economy

    International Nuclear Information System (INIS)

    Kuznetsov, Yu. N.

    2006-01-01

    Currently, some of the most important problem for the nuclear industry are life extension, advance competitiveness and safety of aging LWR NPPs. Based on results of studies performed in the USA (Battelle Memorial Institute) and in Russia (NIKIET), a new power technology, using a combined cycle gas-turbine facility CCGT - LWR, so called TD-Cycle, can significantly help in resolution of some problems of nuclear power industry. The nuclear steam and gas topping cycle is used for re-powering a light water pressurized reactor of PWR or VVER type. An existing NPP is topped with a gas turbine facility with a heat recovery steam generator (HRSG) generating steam from waste heat. The superheated steam of high pressure (P=90-165 bar, T=500-550 C) generated in the HRSG, is expanded in a high pressure (HP) turbine for producing electricity. The HP turbine can work on one shaft with the the gas turbine or at one shaft with intermediate (IP) or low (LP) pressure parts of the main nuclear steam turbine, or with a separate electric generator. The exhausted steam from the HP turbine is injected into the steam mixer where it is mixed with the saturated steam from the NPP steam generator (SG). The mixer is intended to superheat the main nuclear steam and should be characterized by minimum losses during mixing superheated and saturated steam. Steam from the mixer superheated by 20-60 C directs to the existing IP turbine, and then, through a separator-reheater flows into the LP turbine. Feed water re-heaters of LP and HP are actually unchanged in this case. Feed water extraction to the HRSG is supplied after one of LP water heaters. This proposal is intended to re-power existing LWR NPPs. To minimize cost, the IP and LP turbines and electric generator would remain the same. The reactor thermal power and fast neutron flux to the reactor vessel would decrease by 30-50 percent of nominal values. The external peripheral row of fuel elements can be replaced with metal absorber rods to

  14. IAEA Coordinated Research Project on the Establishment of a Material Properties Database for Irradiated Core Structural Components for Continued Safe Operation and Lifetime Extension of Ageing Research Reactors

    Energy Technology Data Exchange (ETDEWEB)

    Borio Di Tigliole, A.; Schaaf, Van Der; Barnea, Y.; Bradley, E.; Morris, C.; Rao, D. V. H. [Research Reactor Section, Vianna (Australia); Shokr, A. [Research Reactor Safety Section, Vienna (Australia); Zeman, A. [International Atomic Energy Agency, Vienna (Australia)

    2013-07-01

    Today more than 50% of operating Research Reactors (RRs) are over 45 years old. Thus, ageing management is one of the most important issues to face in order to ensure availability (including life extension), reliability and safe operation of these facilities for the future. Management of the ageing process requires, amongst others, the predictions for the behavior of structural materials of primary components subjected to irradiation such as reactor vessel and core support structures, many of which are extremely difficult or impossible to replace. In fact, age-related material degradation mechanisms resulted in high profile, unplanned and lengthy shutdowns and unique regulatory processes of relicensing the facilities in recent years. These could likely have been prevented by utilizing available data for the implementation of appropriate maintenance and surveillance programmes. This IAEA Coordinated Research Project (CRP) will provide an international forum to establish a material properties Database for irradiated core structural materials and components. It is expected that this Database will be used by research reactor operators and regulators to help predict ageing related degradation. This would be useful to minimize unpredicted outages due to ageing processes of primary components and to mitigate lengthy and costly shutdowns. The Database will be a compilation of data from RRs operators' inputs, comprehensive literature reviews and experimental data from RRs. Moreover, the CRP will specify further activities needed to be addressed in order to bridge the gaps in the new created Database, for potential follow-on activities. As per today, 13 Member States (MS) confirmed their agreement to contribute to the development of the Database, covering a wide number of materials and properties. The present publication incorporates two parts: the first part includes details on the pre-CRP Questionnaire, including the conclusions drawn from the answers received from

  15. IAEA Coordinated Research Project on the Establishment of a Material Properties Database for Irradiated Core Structural Components for Continued Safe Operation and Lifetime Extension of Ageing Research Reactors

    International Nuclear Information System (INIS)

    Borio Di Tigliole, A.; Schaaf, Van Der; Barnea, Y.; Bradley, E.; Morris, C.; Rao, D. V. H.; Shokr, A.; Zeman, A.

    2013-01-01

    Today more than 50% of operating Research Reactors (RRs) are over 45 years old. Thus, ageing management is one of the most important issues to face in order to ensure availability (including life extension), reliability and safe operation of these facilities for the future. Management of the ageing process requires, amongst others, the predictions for the behavior of structural materials of primary components subjected to irradiation such as reactor vessel and core support structures, many of which are extremely difficult or impossible to replace. In fact, age-related material degradation mechanisms resulted in high profile, unplanned and lengthy shutdowns and unique regulatory processes of relicensing the facilities in recent years. These could likely have been prevented by utilizing available data for the implementation of appropriate maintenance and surveillance programmes. This IAEA Coordinated Research Project (CRP) will provide an international forum to establish a material properties Database for irradiated core structural materials and components. It is expected that this Database will be used by research reactor operators and regulators to help predict ageing related degradation. This would be useful to minimize unpredicted outages due to ageing processes of primary components and to mitigate lengthy and costly shutdowns. The Database will be a compilation of data from RRs operators' inputs, comprehensive literature reviews and experimental data from RRs. Moreover, the CRP will specify further activities needed to be addressed in order to bridge the gaps in the new created Database, for potential follow-on activities. As per today, 13 Member States (MS) confirmed their agreement to contribute to the development of the Database, covering a wide number of materials and properties. The present publication incorporates two parts: the first part includes details on the pre-CRP Questionnaire, including the conclusions drawn from the answers received from the MS

  16. Operational plans for life science payloads - From experiment selection through postflight reporting

    Science.gov (United States)

    Mccollum, G. W.; Nelson, W. G.; Wells, G. W.

    1976-01-01

    Key features of operational plans developed in a study of the Space Shuttle era life science payloads program are presented. The data describes the overall acquisition, staging, and integration of payload elements, as well as program implementation methods and mission support requirements. Five configurations were selected as representative payloads: (a) carry-on laboratories - medical emphasis experiments, (b) mini-laboratories - medical/biology experiments, (c) seven-day dedicated laboratories - medical/biology experiments, (d) 30-day dedicated laboratories - Regenerative Life Support Evaluation (RLSE) with selected life science experiments, and (e) Biomedical Experiments Scientific Satellite (BESS) - extended duration primate (Type I) and small vertebrate (Type II) missions. The recommended operational methods described in the paper are compared to the fundamental data which has been developed in the life science Spacelab Mission Simulation (SMS) test series. Areas assessed include crew training, experiment development and integration, testing, data-dissemination, organization interfaces, and principal investigator working relationships.

  17. Calculation of life distributions, in particular Weibull distributions, from operational observations

    International Nuclear Information System (INIS)

    Rauhut, J.

    1982-01-01

    Established methods are presented by which life distributions of machine elements can be determined on the basis of laboratory experiments and operational observations. Practical observations are given special attention as the results estimated on the basis of conventional have not been accurate enough. As an introduction, the stochastic life concept, the general method of determining life distributions, various sampling methods, and the Weibull distribution are explained. Further, possible life testing schedules and maximum-likelihood estimates are discussed for the complete sample case and for censered sampling without replacement in laboratory experiments. Finally, censered sampling with replacement in laboratory experiments is discussed; it is shown how suitable parameter estimates can be obtained for given life distributions by means of the maximum-likelihood method. (orig./RW) [de

  18. Method and apparatus to predict the remaining service life of an operating system

    Science.gov (United States)

    Greitzer, Frank L.; Kangas, Lars J.; Terrones, Kristine M.; Maynard, Melody A.; Pawlowski, Ronald A. , Ferryman; Thomas A.; Skorpik, James R.; Wilson, Bary W.

    2008-11-25

    A method and computer-based apparatus for monitoring the degradation of, predicting the remaining service life of, and/or planning maintenance for, an operating system are disclosed. Diagnostic information on degradation of the operating system is obtained through measurement of one or more performance characteristics by one or more sensors onboard and/or proximate the operating system. Though not required, it is preferred that the sensor data are validated to improve the accuracy and reliability of the service life predictions. The condition or degree of degradation of the operating system is presented to a user by way of one or more calculated, numeric degradation figures of merit that are trended against one or more independent variables using one or more mathematical techniques. Furthermore, more than one trendline and uncertainty interval may be generated for a given degradation figure of merit/independent variable data set. The trendline(s) and uncertainty interval(s) are subsequently compared to one or more degradation figure of merit thresholds to predict the remaining service life of the operating system. The present invention enables multiple mathematical approaches in determining which trendline(s) to use to provide the best estimate of the remaining service life.

  19. Task Shifting Provision of Contraceptive Implants to Community Health Extension Workers: Results of Operations Research in Northern Nigeria.

    Science.gov (United States)

    Charyeva, Zulfiya; Oguntunde, Olugbenga; Orobaton, Nosa; Otolorin, Emmanuel; Inuwa, Fatima; Alalade, Olubisi; Abegunde, Dele; Danladi, Saba'atu

    2015-09-01

    Contraceptive use remains low in Nigeria, with only 11% of women reporting use of any modern method. Access to long-acting reversible contraceptives (LARCs) is constrained by a severe shortage of human resources. To assess feasibility of task shifting provision of implants, we trained community health extension workers (CHEWs) to insert and remove contraceptive implants in rural communities of Bauchi and Sokoto states in northern Nigeria. We conducted 2- to 3-week training sessions for 166 selected CHEWs from 82 facilities in Sokoto state (September 2013) and 84 health facilities in Bauchi state (December 2013). To assess feasibility of the task shifting approach, we conducted operations research using a pretest-posttest design using multiple sources of information, including surveys with 151 trained CHEWs (9% were lost to follow-up) and with 150 family planning clients; facility observations using supply checklists (N = 149); direct observation of counseling provided by CHEWs (N = 144) and of their clinical (N = 113) skills; as well as a review of service statistics (N = 151 health facilities). The endline assessment was conducted 6 months after the training in each state. CHEWs inserted a total of 3,588 implants in 151 health facilities over a period of 6 months, generating 10,088 couple-years of protection (CYP). After practicing on anatomic arm models, most CHEWs achieved competency in implant insertions after insertions with 4-5 actual clients. Clinical observations revealed that CHEWs performed implant insertion tasks correctly 90% of the time or more for nearly all checklist items. The amount of information that CHEWs provided clients increased between baseline and endline, and over 95% of surveyed clients reported being satisfied with CHEWs' services in both surveys. The study found that supervisors not only observed and corrected insertion skills, as needed, during supervisory visits but also encouraged CHEWs to conduct more community

  20. Quality of life in patients with cleft lip and palate after operation.

    Science.gov (United States)

    Augsornwan, Darawan; Namedang, Sarakull; Pongpagatip, Sumalee; Surakunprapha, Palakorn

    2011-12-01

    Cleft lip and cleft palate are the most common craniofacial anomalies. Srinagarind Hospital has 150-200 cases each year. The operating process of care, requires continuity of care involving a multidisciplinary team. When the patients go to hospital for an operation they experience pain, limited activity and also food is very different from normal life. When attending school they suffer speech articulation problems and feel shy and isolated, which has a detrimental affect on their life style and quality of life. The main purpose of the study is to the present study quality of life in patients with cleft lip and palate after operation. The present study is descriptive research using qualitative and quantitative approaches. The studied population were patients age 8-18 years old who were admitted at 3C Ward and Outpatient Department, Srinagarind Hospital. 33 patients were interviewed for the quantitative approach. Guideline for in-depth interview with 15 patients were used for the qualitative approach. Quantitative data were analyzed and presented in frequency, percentage and standard deviation. The qualitative data were analyzed through content analysis. Patients consider their QOL is high level, but in detail they still worry about self concept psychological well-being. From indept interview patients would like to get further treatment to minimize their scar as soon as possible. Patients consider their quality of life as high level, but they would like to get further treatment.

  1. Food irradiation and its role in shelf life extension of horticulture produce: a comprehensive evaluation of studies carried out in India and abroad

    International Nuclear Information System (INIS)

    Verma, J.; Gautam, S.

    2015-01-01

    Food irradiation is the process of treating foods to a controlled source of ionizing radiation, to reduce post-harvest losses and ensure its safety. With respect to horticulture produce, the role of food irradiation has been well established to fulfill the phytosanitary requirement of the importing countries and also to ensure food safety in certain commodities. Still for establishing its relevance in extending the shelf-life of horticulture produce, substantial scientific inputs are required. Our objective was therefore to summarize in brief the research findings where role of radiation processing in shelf-life extension of horticulture produce has been addressed. Low dose (0.1 kGy) of γ-radiation resulted in sprout inhibition in potatoes and onions, thus prolonging their storage life upto 4 months at 11-12℃. Radiation processing also delayed ripening process in the climacteric fruits by a week upto one month depending on the cultivars and stored condition. Shelf-life of button mushroom (Agaricus bisporus) was extended up to 10-15 days by γ-radiation treatment of 2-3 kGy and storage at 10±2℃ . A 5 kGy radiation dose and 10℃ storage temperature increased the shelf life of peeled ginger samples upto 70 days. Irradiation of guava fruits with 0.1 kGy γ-radiation increased its post harvest life by 8 days. Shelf-life of Litchi was increased upto 28 days by radiation treatment at 0.5 kGy and subsequent low temperature storage. Shelf-life of leafy vegetables increased upto 20 days by a combination process including γ-radiation (Khade, et.al., unpublished data). Electron beam irradiation (2 kGy) extended shelf-life of fresh strawberry fruits upto 4 day. Apples irradiated at 0.2-0.4 kGy showed improved quality upto 3 months of storage. Shelled sweet corn kernels treated with combination process including γ-radiation (5 kGy) treatment showed prolonged shelf-life of 30 days at 4℃ (Kumar S. et.al., unpublished data). In recent study conducted by us on shelf life

  2. Developing and testing an operational framework for assessing quality of life

    International Nuclear Information System (INIS)

    Fahy, F.; O Cinneide, M.

    2008-01-01

    Difficulties with operationalising the concept of sustainable development have generated much debate, and have stimulated a good deal of research on the challenging task of assessing progress towards that goal. This paper focuses on quality of life, as one discourse in the sustainable development literature, and reports on the development and testing of an operational framework for the assessment of quality of life in an urban setting. Core principles of sustainable development are translated into a set of operational criteria for investigating quality of life. The process of formulating these criteria and the manner in which they may be linked to policy and practice are outlined. The application of the framework is demonstrated by reference to the experience of implementing it in an urban centre in Ireland

  3. Analysis of the extension and reduction method of qualified life used in equipment with ambiental qualification; Analisis del metodo de extension y reduccion de vida calificada utilizado en equipo con calificacion ambiental

    Energy Technology Data Exchange (ETDEWEB)

    Serrano R, M.L. [CNSNS, 03020 Mexico D.F. (Mexico)].e -mail: mlserrano@cnsns.gob.mx

    2005-07-01

    With the purpose of reducing costs of acquisition, maintenance, design, hour-man, dose, production, etc. or by changes in the temperature of service, diverse Nuclear Plants (NP) in the world have been carried out extensions and reductions of life of equipment and/or components related with the safety. The used methods are mainly tests type on equipment or component aged quickly, tests type on equipment or component aged naturally and use of the Arrhenius model with monitoring of temperatures in place. The present article carries out an analysis of the Arrhenius model with monitoring of temperatures in place, which is presented in two variants, equation (1) and (2), since it is the but used by the NP with extension purposes and reduction of qualified life. As back information, it was made one search of investigations, applied to diverse fields of the science that try about the reliability of the results provided by Arrhenius for the aging case. The results of the analysis indicate: I) that this method make uncertainties in some intervals of temperature and 2) which of the two variants it provides data more reliable. (Author)

  4. A case of industrial safety appraisal for extension of service life of GTK-10-4 gas turbines used at gas transmission stations

    Science.gov (United States)

    Rybnikov, A. I.; Kovalev, A. G.; Kryukov, I. I.; Leont'ev, S. A.; Moshnikov, A. V.

    2017-04-01

    It is shown that the extended life and enhanced operational reliability of parts and subassemblies of the most popular GTK-10-4 gas transmission plants are determined by the enhanced efficiency of the control over technical condition and operational safety of turbine plants in conformity with industrial safety requirements imposed on gas pipeline compressor stations. It has been established that the materials of parts and subassemblies of gas turbine plants with different, especially with maximal operating time, shall be exposed to NDT for the purpose of determining the actual mechanical characteristics of these materials with different operating time and calculating residual life. The analysis of damageability and operating conditions has helped to identify parts and subassemblies for repair or replacement with the highest frequency of unacceptable defects. These parts and subassemblies have been shown to include base members of the axial compressor (AC), a turbine housing, an axial compressor rotor, high- and low-pressure turbine (HPT and LPT) discs, a 12-part holder, the housing of the holder of HPT and LPT guiding blades, a sealed baffler, and working and guiding AC, LPT and HPT blades. The most typical operational defects have been enumerated and analyzed. It has been determined that the primary task of the industrial safety appraisal for extending the life of GTK-10-4 with limit-exceeding operating time is to thoroughly examine HPT and LPT discs with more than 130,000 hours of operating time and establish by DT methods characteristics of materials for evaluation, taking account of their degradation, and residual life of critical turbine elements. In addition, it has been shown that the service life of HP turbine discs can be extended by replacing the disc material (EP-428 12% chromium steel) with a material with a higher linear expansion factor that somewhat exceeds the expansion factor of EI-893 nickel alloy used to melt out working blades.

  5. Optimization of Life Cycle Extension of Asphalt Concrete Mixtures in regard to Material Properties, Structural Design, and Economic Implications

    Directory of Open Access Journals (Sweden)

    Jan Mikolaj

    2016-01-01

    Full Text Available Design of ACM life cycle is defined with respect to traffic load acting on the pavement and road class for a period of about 20 years. In practice, reconstruction is usually pending until the end of the life cycle after which the reconstruction takes place and the original materials are replaced by new materials. Life cycle of the pavement construction in road structure is significantly longer than that of the ACM; it is therefore necessary to consider ACM from a long term viewpoint, that is, exceeding their life expectancy. This paper describes a methodology which consists of analytical calculations, experimental measurements, and optimization of the ACM life cycle with the use of a rehabilitation action to provide new physical properties of pavement surfacing in different periods of the original life cycle. The aim is to attain maximal economic effectiveness, by minimizing financial costs for rehabilitation and maintenance and economic costs of road user. Presented method allows deriving optimal life cycle from various rehabilitation alternatives for particular ACM with the fact that all the necessary parameters are derived from specific experimental measurements and calculations. The method is applicable to all types of ACM materials; however, for each material, it is necessary to carry out the necessary measurements and tests. The article describes the methodology and case study results for a particular type of ACM material.

  6. Gas spark switches with increased operating life for Marx generator of lightning test complex

    Energy Technology Data Exchange (ETDEWEB)

    Bykov, Yu. A.; Krastelev, E. G., E-mail: ekrastelev@yandex.ru [Russian Academy of Sciences, Joint Institute for High Temperature (Russian Federation)

    2016-12-15

    A new design of gas spark switches with an increased operating life and stable dynamic characteristics for the Marx generator of the lightning test complex has been developed. The switches are characterized by the following parameters in the mode of operation: voltage up to 80 kV, discharge current up to 50 kA, flowing charge up to 3.5 C/pulse. An increased operating life is achieved by using torus-shaped electrodes with increased working surface area and a trigger electrode in the form of a thick disk with a hole located between them. Low breakdown delay time and high stability of breakdown voltage under dynamic conditions are provided by gas preionization in the spark gap using UV radiation of an additional corona discharge in the axial region.

  7. Extension of the African Regional Co-operative Agreement for Research, Development and Training Related to Nuclear Science and Technology (AFRA)

    International Nuclear Information System (INIS)

    1998-01-01

    As of 4 May 1998, notifications of acceptance of the extension of the African Regional Co-operative Agreement for Research, development and Training Related to Nuclear Science and Technology (INFCIRC/377), had been received by the Director General of the IAEA from the Governments of 22 African States. Zimbabwe is added to the list of 21 States reported in the previous edition (add. 9) to this document. Extension entered into force on 4 April 1995, upon expiration of the original Agreement, and will remain in force for an additional period of 5 years, i.e. through 3 April 2000

  8. Extension of the African Regional Co-operative Agreement for Research, Development and Training Related to Nuclear Science and Technology (AFRA)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-05-15

    As of 4 May 1998, notifications of acceptance of the extension of the African Regional Co-operative Agreement for Research, development and Training Related to Nuclear Science and Technology (INFCIRC/377), had been received by the Director General of the IAEA from the Governments of 22 African States. Zimbabwe is added to the list of 21 States reported in the previous edition (add. 9) to this document. Extension entered into force on 4 April 1995, upon expiration of the original Agreement, and will remain in force for an additional period of 5 years, i.e. through 3 April 2000

  9. African Regional Co-operative Agreement for research, development and training related to nuclear science and technology. Extension of agreement

    International Nuclear Information System (INIS)

    1995-01-01

    Pursuant to Article XIV.2, the Agreement ''shall continue in force for a period of five years from the data of its entry into force and may be extended for further periods of five years if the Government Parties so agree''. The extension of the Agreement entered into force on 4 April 1995, upon expiration of the original Agreement

  10. African Regional Co-operative Agreement for research, development and training related to nuclear science and technology. Extension of agreement

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-05-10

    Pursuant to Article XIV.2, the Agreement ``shall continue in force for a period of five years from the data of its entry into force and may be extended for further periods of five years if the Government Parties so agree``. The extension of the Agreement entered into force on 4 April 1995, upon expiration of the original Agreement.

  11. The effects of thoracic surgery operations on quality of life: a multicenter study.

    Science.gov (United States)

    Öz, Gürhan; Solak, Okan; Metin, Muzaffer; Esme, Hıdır; Sayar, Adnan

    2015-10-01

    Some treatment modalities may cause losses in patients' life comfort because of the treatment process. Our aim is to determine the effects of thoracic surgery operations on patients' quality of life. This is a multicenter and prospective study. A hundred patients, who had undergone posterolateral thoracotomy (PLT) and/or lateral thoracotomy (LT), were included in the study. A quality of life questionnaire (SF-36) was used to determine the changes in life comfort. SF-36 was performed before the operation, on the first month, third month, sixth month and twelfth month after the operation. Seventy-two percent (n = 72) of the patients were male. PLT was performed in 66% (n = 66) of the patients, and LT was performed in 34% (n = 34) of the patients. The types of resections in patients were pneumonectomy in four patients, lobectomy in 59 patients and wedge resection in 11 patients. No resection was performed in 26 patients. Thoracotomy caused deteriorations in physical function (PF), physical role (RP), bodily pain (BP), health, vitality and social function scores. The deteriorations observed in the third month improved in the sixth and twelfth months. The PF, RP, BP and MH scores of the patients with lung resection were much more worsened compared with the patients who did not undergo lung resection. Thoracic surgery operations caused substantial dissatisfaction in life comfort especially in the third month postoperatively. The worsening in physical function, physical role, pain and mental health is much more in patients with resection compared with the patients who did not undergo resection. © 2014 John Wiley & Sons Ltd.

  12. Analysis of the 3 and 4 cycles with extensions in the operation of the CNLV U-1

    International Nuclear Information System (INIS)

    Montes T, J.L.; Torres A, C.; Perusquia C, R.

    1992-08-01

    The objective of the report is the comparison of the radial distributions of burned in the core among the results of the simulation of the Laguna Verde Central U-1 reactor during the operation of the cycles 1 to 4 and the data of the operation with information provided by the fuel supplier. (Author)

  13. Shelf-life extension of packed mushroom (Agaricus sp.) by a combination of gamma radiation and low temperature storage

    International Nuclear Information System (INIS)

    Gautam, S.; Sharma, Arun; Thomas, Paul

    1997-01-01

    Gamma irradiation to a dose of 2 kGy coupled with storage at 10 degC was found to provide 2-3 fold enhancement in the shelf-life of button mushrooms with reduced energy requirement for storage. The study shows possible commercial application of this technology. (author). 6 refs., 3 figs

  14. EXTENSION OF COMPUTER-AIDED PROCESS ENGINEERING APPLICATIONS TO ENVIRONMENTAL LIFE CYCLE ASSESSMENT AND SUPPLY CHAIN MANAGEMENT

    Science.gov (United States)

    The potential of computer-aided process engineering (CAPE) tools to enable process engineers to improve the environmental performance of both their processes and across the life cycle (from cradle-to-grave) has long been proffered. However, this use of CAPE has not been fully ach...

  15. High oxygen and high carbon dioxide modified atmospheres for shelf-life extension of minimally processed carrots

    NARCIS (Netherlands)

    Amanatidou, A.; Slump, R.A.; Gorris, L.G.M.; Smid, E.J.

    2000-01-01

    The impact of high O2 + high CO2 modified atmospheres (MA), on the preservation of minimally processed carrots was studied. A combination of 50% O2 + 30% CO2 prolonged the shelf life of sliced carrots compared to storage in air by 2 to 3 d. When the carrots received a pre-treatment with a 0.1%

  16. Extension of the African regional co-operative agreement for research, development and training related to nuclear science and technology (AFRA)

    International Nuclear Information System (INIS)

    1998-01-01

    The document presents the status of acceptances as of 21 September 1998 of the extension of the African Co-operative Agreement for Research, Development and Training Related to Nuclear Science and Technology (AFRA) which entered into force on 4 April 1995, upon expiration of the original Agreement, and will remain in force for an additional period of 5 years, i.e. through 3 April 2000

  17. Extension of the African regional co-operative agreement for research, development and training related to nuclear science and technology (AFRA)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-11-13

    The document presents the status of acceptances as of 21 September 1998 of the extension of the African Co-operative Agreement for Research, Development and Training Related to Nuclear Science and Technology (AFRA) which entered into force on 4 April 1995, upon expiration of the original Agreement, and will remain in force for an additional period of 5 years, i.e. through 3 April 2000

  18. Experimental research into operating strength and fatigue life of bodywork of buses and trolleybuses

    International Nuclear Information System (INIS)

    Dolhof, V.; Kepka, M.; Rehor, P.; Horak, V.; Sima, J.

    1992-01-01

    Operational strength and fatigue life reliability of trolleybus and bus bodies are usually assessed by computational methods in combination with selected tests. The latter include test runs of vehicles on real routes or on specially designed tracks, tests on complete vehicles under model test conditions and laboratory tests on selected materials, parts and subassemblies. This paper describes a method of experimental investigation of operational strength and reliability developed and applied at the Central Research Institute Skoda for public-transport road vehicles made in Czechoslovakia. (orig.)

  19. Life satisfaction in patients with and without spinal cord ischemia after advanced endovascular therapy for extensive aortic disease at mid-term follow-up.

    Science.gov (United States)

    Mehmedagic, Irma; Santén, Stefan; Jörgensen, Sophie; Acosta, Stefan

    2016-11-11

    Advanced endovascular aortic repair can be used to treat patients with extensive and complex aortic disease who are at risk of spinal cord ischaemia. The aim of this study was to compare whether life satisfaction differs between patients with and without spinal cord ischaemia at mid-term follow-up. Nested case-control study. Among patients undergoing advanced endovascular aortic repair between 2009 and 2012, 18 patients with spinal cord ischaemia and 33 without were interviewed at home. The Life Satisfaction Questionnaire (LiSat-11) and the Satisfaction With Life Scale (SWLS) were used. LiSat-11 found that patients with spinal cord ischaemia were more dissatisfied with their activities of daily living than were patients without spinal cord ischaemia (p=0.012). Both groups had similar, very low, scores in the sexual life domain; median 2.0 (interquartile range (IQR) 1.5-3.0) and 3.0 (IQR 2.0-4.0), respectively. There was no difference in SWLS between the groups. This study cohort of patients who underwent advanced endovascular aortic repair was rather homo-genous in their rating of life satisfaction and there was little difference between mid-term survivors who had spinal cord ischaemia and those who did not.

  20. Effect of unbalanced voltage on windings temperature, operational life and load carrying capacity of induction machine

    Energy Technology Data Exchange (ETDEWEB)

    Gnacinski, P. [Gdynia Maritime University, Department of Ship Electrical Power Engineering, Morska Street 83, 81-225 Gdynia (Poland)

    2008-04-15

    This paper investigates the influence of the CVUF angle on the windings temperature rise and the derating factor of an induction machine supplied with unbalanced voltage. The effect of simultaneous voltage unbalance and harmonics on its operational life is analyzed as well. The results of calculations and experimental investigations are presented for two induction cage machines of rated power 3 and 5.5 kW. (author)

  1. Predicting tool life in turning operations using neural networks and image processing

    Science.gov (United States)

    Mikołajczyk, T.; Nowicki, K.; Bustillo, A.; Yu Pimenov, D.

    2018-05-01

    A two-step method is presented for the automatic prediction of tool life in turning operations. First, experimental data are collected for three cutting edges under the same constant processing conditions. In these experiments, the parameter of tool wear, VB, is measured with conventional methods and the same parameter is estimated using Neural Wear, a customized software package that combines flank wear image recognition and Artificial Neural Networks (ANNs). Second, an ANN model of tool life is trained with the data collected from the first two cutting edges and the subsequent model is evaluated on two different subsets for the third cutting edge: the first subset is obtained from the direct measurement of tool wear and the second is obtained from the Neural Wear software that estimates tool wear using edge images. Although the complete-automated solution, Neural Wear software for tool wear recognition plus the ANN model of tool life prediction, presented a slightly higher error than the direct measurements, it was within the same range and can meet all industrial requirements. These results confirm that the combination of image recognition software and ANN modelling could potentially be developed into a useful industrial tool for low-cost estimation of tool life in turning operations.

  2. An Extensive comparison of operating-lease capitalisation approaches and their unavoidable assumptions : Are further disclosures desirable?

    OpenAIRE

    Lückerath – Rovers, M.; Bos, de, A.

    2009-01-01

    Previous research of Imhoff, Lipe and Wright (1991), Beattie, Edwards and Goodacre (1998) and others has shown that the capitalisation of operating leases on the balance sheet has a major impact on the accounting ratios. This empirical study expands previous research on two issues. First, we refine the capitalisation methods that have been developed by previous researchers. Second, we expand the focus from the relevance criteria of operating-lease information to the completeness-criterion of ...

  3. Evaluation of long term health-related quality of life in extensive burns: a 12-year experience in a burn center.

    Science.gov (United States)

    Xie, Bing; Xiao, Shi-chu; Zhu, Shi-hui; Xia, Zhao-fan

    2012-05-01

    We sought to evaluate the long term health-related quality of life (HRQOL) in patients survived severely extensive burn and identify their clinical predicting factors correlated with HRQOL. A cross-sectional study was conducted in 20 patients survived more than 2 years with extensive burn involving ≥70% total body surface area (TBSA) between 1997 and 2009 in a burn center in Shanghai. Short Form-36 Medical Outcomes Survey (SF-36), Brief Version of Burn Specific Health Scale (BSHS-B) and Michigan Hand Outcome Questionnaire (MHQ) were used for the present evaluation. SF-36 scores were compared with a healthy Chinese population, and linear correlation analysis was performed to screen the clinical relating factors predicting physical and mental component summary (PCS and MCS) scores from SF-36. HRQOL scores from SF-36 were significantly lower in the domains of physical functioning, role limitations due to physical problems, pain, social functioning and role limitations due to emotional problems compared with population norms. Multiple linear regression analysis demonstrated that only return to work (RTW) predicted improved PCS. While age at injury, facial burns, skin grafting and length of hospital stay were correlated with MCS. Work, body image and heat sensitivity obtained the lowest BSHS-B scores in all 9 domains. Improvements of HRQOL could still be seen in BSHS-B scores in domains of simple abilities, hand function, work and affect even after a quite long interval between burns and testing. Hand function of extensive burn patients obtained relatively poor MHQ scores, especially in those without RTW. Patients with extensive burns have a poorer quality of life compared with that of general population. Relatively poor physical and psychological problems still exist even after a long period. Meanwhile, a trend of gradual improvements was noted. This information will aid clinicians in decision-making of comprehensive systematic regimens for long term rehabilitation

  4. Control of the Onboard Microgravity Environment and Extension of the Service Life of the Long-Term Space Station

    Science.gov (United States)

    Titov, V. A.

    2018-03-01

    The problem of control of the on-board microgravity environment in order to extend the service life of the long-term space station has been discussed. Software developed for the ISS and the results of identifying dynamic models and external impacts based on telemetry data have been presented. Proposals for controlling the onboard microgravity environment for future long-term space stations have been formulated.

  5. Combined effects of thermosonication and slightly acidic electrolyzed water on the microbial quality and shelf life extension of fresh-cut kale during refrigeration storage.

    Science.gov (United States)

    Mansur, Ahmad Rois; Oh, Deog-Hwan

    2015-10-01

    This study evaluated the efficacy of thermosonication combined with slightly acidic electrolyzed water (SAcEW) on the shelf life extension of fresh-cut kale during storage at 4 and 7 °C. Each kale (10 ± 0.2 g) was inoculated to contain approximately 6 log CFU/g of Listeria monocytogenes. Each inoculated or uninoculated samples was dip treated at 40 °C for 3 min with deionized water, thermosonication (400 W/L), SAcEW (5 mg/L), sodium chlorite (SC; 100 mg/L), sodium hypochlorite (SH; 100 mg/L), and thermosonication combined with SAcEW, SC, and SH (TS + SAcEW, TS + SC, and TS + SH, respectively). Growths of L. monocytogenes and spoilage microorganisms and changes in sensory (overall visual quality, browning, and off-odour) were evaluated. The results show that lag time and specific growth rate of each microorganism were not significantly (P > 0.05) affected by treatment and storage temperature. Exceeding the unacceptable counts of spoilage microorganisms did not always result in adverse effects on sensory attributes. This study suggests that TS + SAcEW was the most effective method to prolong the shelf life of kale with an extension of around 4 and 6 days at 4 and 7 °C, respectively, and seems to be a promising method for the shelf life extension of fresh produce. Copyright © 2015 Elsevier Ltd. All rights reserved.

  6. Application of the combined cycle LWR-gas turbine to PWR for NPP life extension, safety upgrade and improving economy

    International Nuclear Information System (INIS)

    Kuznetsov, Yu. N.; Lisitsa, F. D.; Smirnov, V. G.

    2000-01-01

    The unconventional technology to extend the lifetime for the NPPs now in operation and make a construction of new NPPs cheaper three-quarter erection of steam-gas toppings to the nuclear power units three-quarter is considered in the paper. Application of the steam-gas toppings permits through reducing power of aging reactors to extend lifetime of nuclear power unit, enhance its safety and at the same time to keep full load operation of NPP turbine and other balance-of-plant equipment. Proposed technology is examined for Russian VVER-440 reactor as an example and, also, as a pilot project. for Russian boiling VK-50 reactor now in operation. Heat flow sheets of the power plants, their parameters and economic problems are discussed. (author)

  7. Effects of combination treatments of radiation and salt on the shelf life extension of hilsha fish (Hilsa ilisha) at low temperature

    International Nuclear Information System (INIS)

    Hossain, M.M.; Alam, M.Z.; Karim, A.; Rashid, H.; Khan, A.H.

    1991-01-01

    Investigations were made on the application of combination treatments of radiation with common salt at the doses of 50, 100 and 150 krad on the shelflife extension of hilsha fish slices at 5 deg. C. Quality assessments were made by chemical, bacteriological and sensory evaluations. The storage life of control samples of the same storage temperature was about 3 weeks, whereas salted samples treated with 100 Krad were acceptable up to 9 weeks. Results of bacteriological tests agreed well with sensory panel evaluations but chemical parameters such as TVB and TMA were not suitable index for quality assessment of irradiated salted fish samples

  8. The role of food irradiation in terms of value addition and extension of shelf life of agri. materials (from FARM to Consumer)

    International Nuclear Information System (INIS)

    Prakash, V.

    2001-01-01

    Today, with the advent of modern processing techniques in the area of value addition to agri resources, food irradiation has made a big dent in terms of extension of shelf life and confidence of making the food free from microbial and other contaminants and need to be really harnessed more than what we are doing. However, there is still certain amount of stigma attached to this technology not because the technology is un-ripe but it is because of lack of awareness with the masses as regards to the safety of the foods that are processed by irradiation

  9. Analysis of shelf-life extension of Asiatic red spot emperor (Lethrinus lentjan) using low dose of gamma rays and evaluation of biomolecular alterations during cold storage

    International Nuclear Information System (INIS)

    Sunith Shine, S.R.; Godwin Wesley, S.; Satheesh, S.; Moses Ezhil Raj, A.

    2012-01-01

    Food irradiation, in combination with good refrigeration and handling practices, provides means to increase fish product shelf-life. Irradiation is effective in reducing microorganisms is known as a good method for inactivating pathogens in food materials. The present work focuses on the effect of the gamma radiation in aspect of finding microbiological, biochemical and sensory attribute over a period of 0 to 60 days of the storage. Variations in pH, FFA, TVBN, TMAN and TBA were observed throughout the storage period, present observation provide a possibility of irradiation treatment up to 6 kGy as a prerequisite for shelf life extension and by the SDS analysis most intense proteins were retained at the end of the cold storage

  10. Shelf-life extension of fresh Tuber aestivum and Tuber melanosporum truffles by modified atmosphere packaging with microperforated films.

    Science.gov (United States)

    Rivera, Carmen Susana; Blanco, Domingo; Salvador, María Luisa; Venturini, María Eugenia

    2010-05-01

    The aim of this study was to design a modified atmosphere packaging suitable for Tuber melanosporum and Tuber aestivum truffles that extend their shelf life and their availability as a fresh product. Their respiration rates were determined by O(2) depletion and CO(2) formation in closed systems performed at different temperatures: 4, 10, and 23 degrees C. The results were fitted by exponential equations and derivatives of these equations were used to obtain the experimental respiration rates. Our results revealed high respiration rates in both species of truffles and respiratory quotients (RQ) higher than 1 in all the cases studied. A linear dependence of respiration rate, both R(O2) and R(CO2), on O(2) concentration was revealed. A mathematical model was used to predict the evolution of the gaseous composition at 4 degrees C in the interior of polypropylene trays (250 mL) heat sealed with 4 microperforated films of different transmission rates. A microperforated film with 2 holes (90 x 50 microm) was selected to produce an internal atmosphere of 15%CO(2)/7%O(2) at 4 degrees C. The predicted atmosphere composition was confirmed by the experimental results. The quality and microbiological characteristics of fresh truffles, packaged in these conditions, revealed that the microbial counts of pseudomonads and Enterobacteriaceae were decreased, the weight loss was reduced, the typical hard texture was maintained, and the development of mycelium growth was delayed, enabling good scores for aroma and flavor, and therefore prolonging the shelf life of T. melanosporum and T. aestivum truffles to 28 and 21 d, respectively. Practical Application: This study describes the benefits of using MAP with microperforated films in the postharvest storage of Tuber melanosporum and Tuber aestivum fresh truffles. The shelf life of T. aestivum is prolonged to 21 d and of T. melanosporum to beyond 28 d increasing the possibilities for a foreign market.

  11. Antimicrobial effect and shelf-life extension by combined thermal and pulsed electric field treatment of milk.

    Science.gov (United States)

    Walkling-Ribeiro, M; Noci, F; Cronin, D A; Lyng, J G; Morgan, D J

    2009-01-01

    The impact of a combined hurdle treatment of heat and pulsed electric fields (PEF) was studied on native microbiota used for the inoculation of low-fat ultra-high temperature (UHT) milk and whole raw milk. Microbiological shelf-life of the latter following hurdle treatment or thermal pasteurization was also investigated. UHT milk was preheated to 30 degrees C, 40 degrees C or 50 degrees C over a 60-s period, pulsed for 50 micros or 60 micros at a field strength of 40 kV cm(-1) or for 33 micros at 50 kV cm(-1). Heat and PEF reduced the microbial count by a maximum of 6.4 log in UHT milk (50 degrees C; 50 kV cm(-1), 33 micros) compared to 6.0 log (P > or = 0.05) obtained by thermal pasteurization (26 s, 72 degrees C). When raw milk was treated with a combination of hurdles (50 degrees C; 40 kV cm(-1), 60 micros) a 6.0 log inactivation of microbiota was achieved and microbiological milk shelf-life was extended to 21 days under refrigeration (4 degrees C) vs 14 days in thermally pasteurized milk. Native microbiota was decreased by 6.7 log following conventional pasteurization. The findings suggest that heat and PEF achieved similar inactivation of native microbiota in milk and longer stabilization of microbiological shelf-life than thermal pasteurization. A hurdle approach of heat and PEF could represent a valid milk processing alternative to conventional pasteurization. Hurdle treatment might also preserve native milk quality better due to less thermal exposure.

  12. Quality of life and sexual function of women operated on reproductive system organs

    Directory of Open Access Journals (Sweden)

    О. S. Lashkul

    2018-02-01

    Full Text Available Aim – to study the effect of planned gynecological operations on the integral characteristics of physical, psychological, emotional, social and sexual functioning of women. Materials and methods. Quality of life and sexual function were studied in 165 patients who underwent planned gynecological operations. Depending on the type of surgical treatment patients were divided into 6 groups: the 1st group – 20 patients (vaginal hysterectomy without FTS, the 2nd group – 23 patients (abdominal hysterectomy without FTS, the 3rd group – 54 patients (laparoscopic operations on the uterine appendages without FTS, the 4th group – 21 patients (vaginal hysterectomy with FTS, the 5th group – 20 patients (abdominal hysterectomy with FTS, the 6th group – 27 patients (laparoscopic operations on the uterine appendages with FTS. To assess the quality of life a short version of the SF-36 questionnaire was used. The questionnaire was developed at the US Institute of Health, author J. E. Ware, and contains 36 items. They are grouped so that they reflect 8 different aspects related to health. The results for each scale are presented in a point scale (from 1 to 100, where a higher score corresponds to a better quality of life. To assess the sexual function a questionnaire was conducted using the female sexual function index (FSFI. The questionnaire includes 19 items that provide of characteristics of desire, excitement, lubrication, orgasm, getting sexual satisfaction and dyspareunia presence assessment. The minimum score is 2, the maximum is 36. Stages of the questionnaire: before the operation and three months after the operation. Results. In patients before and after laparoscopic surgery on uterine appendages without FTS and with FTS, the mean values of the female sexual function index were significantly higher after surgery and reached the maximum value of 36. So, by questionnaire before and after 3 months it has been found that the indicators

  13. Development of a model to compute the extension of life supporting zones for Earth-like exoplanets.

    Science.gov (United States)

    Neubauer, David; Vrtala, Aron; Leitner, Johannes J; Firneis, Maria G; Hitzenberger, Regina

    2011-12-01

    A radiative convective model to calculate the width and the location of the life supporting zone (LSZ) for different, alternative solvents (i.e. other than water) is presented. This model can be applied to the atmospheres of the terrestrial planets in the solar system as well as (hypothetical, Earth-like) terrestrial exoplanets. Cloud droplet formation and growth are investigated using a cloud parcel model. Clouds can be incorporated into the radiative transfer calculations. Test runs for Earth, Mars and Titan show a good agreement of model results with observations.

  14. An Extensive comparison of operating-lease capitalisation approaches and their unavoidable assumptions : Are further disclosures desirable?

    NARCIS (Netherlands)

    Lückerath – Rovers, M.; Bos, de A.

    2009-01-01

    Previous research of Imhoff, Lipe and Wright (1991), Beattie, Edwards and Goodacre (1998) and others has shown that the capitalisation of operating leases on the balance sheet has a major impact on the accounting ratios. This empirical study expands previous research on two issues. First, we refine

  15. Extension of operational systems in computers of common use for application in systems for experimental equipment control

    International Nuclear Information System (INIS)

    Demidov, M.A.; Makarov, V.V.; Solov'ev, G.N.

    1985-01-01

    The problems of constructing specialized software for large complexes of experimental equipment and its functioning with serial operating systems (OS) are discussed. The main concepts being the base of dispatching software construction (an applied program package) extending the ES OS potentialities being used in the IHEP system for automatic data acquisition and accelerator control are considered

  16. Life extension and the position of the hormetic zone depends on sex and genetic background in Drosophila melanogaster.

    Science.gov (United States)

    Sarup, Pernille; Loeschcke, Volker

    2011-04-01

    Hormesis, the beneficial effect of a mild stress, has been proposed as a means to prolong the period of healthy ageing as it can increase the average lifespan of a cohort. However, if we want to use hormesis therapeutically it is important that the treatment is beneficial on the individual level and not just on average at the population level. Long lived lines have been shown not to benefit from a, in other lines, hormesis inducing heat treatment in Drosophila melanogaster, D. buzzatii and mice. Also in many experiments hormesis has been reported to occur in one sex only, usually males but not in females. Here we investigated the interaction between the hormetic response and genetic background, sex and duration of a mild heat stress in D. melanogaster, using three replicate lines that have been selected for increased longevity and their respective control lines. We found that genetic background influences the position of the hormetic zone. The implication of this result could be that in a genetically diverse populations a treatment that is life prolonging in one individual could be life shortening in other individuals. However, we did find a hormetic response in all combinations of line and sex in at least one of the experiments which suggests that if it is possible to identify the optimal hormetic dose individually hormesis might become a therapeutic treatment.

  17. The Effects of Life Domains, Constraints, and Motivations on Academic Dishonesty: A Partial Test and Extension of Agnew's General Theory.

    Science.gov (United States)

    Cochran, John K

    2017-08-01

    Recently, Robert Agnew introduced a new general theory of crime and delinquency in which he attempted to corral the vast array of theoretical "causes" of criminal conduct into a more parsimonious statement organized into one of five life domains: self, family, peers, school, and work as well as constraints against crime and motivation for it. These domains are depicted as the source of constraints and motivations and whose effects are, in part, mediated by these constraints and motivations. Based on self-report data on academic dishonesty from a sample of college students, the present study attempts to test this general theory. While several of the life domain variables had significant effects of cheating in the baseline model, all of these effects were fully mediated by constraints and motivations. In the final model, academic dishonesty was observed to be most significantly affected by the perceived severity of formal sanction threats, the number of credit hours enrolled, the frequency of skipping classes, and pressure from friends.

  18. Advanced maintenance strategies for power plant operators--introducing inter-plant life cycle management

    International Nuclear Information System (INIS)

    Graeber, Ulrich

    2004-01-01

    One of the most important goals of competing power plant operators is to ensure safe operation of their plants, characterized by maximum availability throughout the entire life cycle and minimized specific generating costs. One parameter crucial to the total price of electricity--and one that can be actively influenced by the power plant operators--is maintenance. Up to 30% of all electricity generating costs accrue from maintenance. In the past years maintenance measures have been optimized particularly by the application and continuing development of testing and diagnostic techniques, by the increased level of system and component automation as well as more efficient organization structures. Despite the considerable success of these efforts, the potential for further cost reductions is still far from exhausted. But the risks connected to reliability, availability and safety need to be analyzed in greater detail in order to ensure the sustainability of the savings already achieved as well as those yet to be realized. The systematic application of condition-based maintenance and the implementation of structured life cycle management are essential requirements. An inter-plant approach is recommended to make a quick implementation of maintenance optimization potentials possible. Plant-specific improvement potentials can be established with the help of a best-practice comparison, and measures and priorities can be defined for realizing them. Creating an inter-plant database will allow experience and findings to be analyzed quickly and efficiently by experts and made available to all participants on a neutral platform. Despite--or maybe owing to--the increasingly competitive marketplace, a sustained reduction in the maintenance costs of power plant operators can only be achieved through a structured, inter-plant exchange of experience. The ZES offers the industry a suitable platform for cooperation with its 'Condition-Based Maintenance' research focus. The introduction

  19. Use of on-line fatigue monitoring of nuclear reactor components as a tool for plant life extension

    International Nuclear Information System (INIS)

    Stevens, G.L.; Ranganath, S.

    1991-01-01

    In this paper the application of an on-line fatigue monitoring system for tracking fatigue usage in operating power plants is described. The system, like several others which have been developed, uses the influence function approach, operates on a microcomputer, and determines component stresses using temperature, pressure, and flow rate data that are typically available from plant computers. Using plant-unique influence functions developed specifically for each component location, the system calculates stresses as a function of time and computes the fatigue usage. Stress values are calculated at time internals defined by the user and the fatigue values are saved on files for use at a later time. The application of the GE Fatigue Monitoring System (GEFMS) to calculate fatigue usage in the feedwater nozzle of a GE boiling Water Reactor is described in this paper

  20. Los Alamos National Laboratory Request for Proposals: Trident Laser System (TLS) Redeployment and Life Extension, October 5, 2016

    Energy Technology Data Exchange (ETDEWEB)

    Stringer, Steven F. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-10-04

    In May 2016, LANS announced that the Trident Laser Facility would cease operating effective September 15, 2016. That date was subsequently extended. The current plan is to operate for an additional, limited period in early CY 2017, and to leverage that activity to provide a training opportunity to the party that will redeploy the TLS. The TLS will then be disassembled and packaged for shipping to the new site, where it may be reconstituted and continue to be used by the physics research community. It is LANS’ intent that Trident will be sited with an organization that will supply its own funding for TLS installation, calibration, and lifecycle operation. Ideally, the receiving party will plan to upgrade TLS with new capability. The equipment to be transferred includes the laser, its power supply, target station and chamber, and a suite of diagnostic instrumentation. Under a Joint Use Agreement it is anticipated that all equipment will remain property of the Laboratory and subject to on-site configuration verification.

  1. Representation theory of Lie-admissible enveloping algebras on operator algebras: an extension of a theorem by Nelson

    International Nuclear Information System (INIS)

    Ghikas, D.K.P.; Ktorides, C.N.; Papaloukas, L.

    1980-01-01

    This mathematical note is motivated by an assessment concerning our current understanding of the role of Lie-admissible symmetries in connection with quantum structures. We identify the problem of representations of the universal enveloping (lambda, μ)-mutation algebra of a given Lie algebra on a suitable algebra of operators, as constituting a fundamental first step for improving the situation. We acknowledge a number of difficulties which are peculiar to the adopted nonassociative product for the operator algebra. In view of these difficulties, we are presently content in establishing the generalization, to the Lie-admissible case, of a certain theorem by Nelson. This theorem has been very instrumental in Nelson's treatment concerning the Lie symmetry content of quantum structures. It is hoped that a similar situation will eventually prevail for the Lie-admissible case. We offer a number of relevant suggestions

  2. Shelf-life extension and improving micro-biological quality of mixed peas with diced carrot by gamma irradiation

    International Nuclear Information System (INIS)

    Taha, S. M.; Hammad, A. A.; Amal, S. M.; Gebreel, H. M.

    2010-01-01

    Mixed peas with diced carrot were collected and examined for their microbiological quality. All the examined samples had high level of microbial load. All examined samples contained Escherichia coli (E. coli) and Enterococcus faecalis (Ent. faecalis). Staphylococcus aureus (S. aureus) was detected in only 4 of samples (26.3%). The tested samples were free from Aeromonas hydrophila (A. hydrophila), Listeria monocytogenes (L monocytogenes) and Salmonella species. Gamma irradiation caused a great reduction in all microbial loads. During refrigerated storage, the counts of all microorganisms increased, but the rate of increase was slower as the irradiation dose increased. Irradiation dose of 3 kGy was the optimum dose for preservation of mixed peas with diced carrot which extended the refrigeration shelf-life up to 21 days and it was sufficient in eliminating pathogenic bacteria without affecting their sensory quality and with negligible effect on chemical quality.

  3. Parameterization of mechanical process operations taking into consideration a coefficient of variation and tool life

    Directory of Open Access Journals (Sweden)

    A. S. Sgibnev

    2014-01-01

    Full Text Available This article describes the results of studies on methods for improving the reliability of mechanical process operations of hard-to-machine materials. In serial production hard-to-machine materials processing should be characterized by high reliability, in particular, low dispersion tool life.The aim is to analyze the reliability of a part of the technological system, i.e. the tool for mechanical processing of hard-to-machine materials.The paper analyzes the effect of various input parameters of the technological system (processed material, tool material, technological environment, operating parameters (processing modes on the reliability of the technological system. A feature of this work is to obtain quantitative characteristics of reliability for processing just the hard-to-machine materials. It is an important problem-solving because of the high cost of both the materials and the tool.For various tool, processed materials, and process operation conditions the experiments have been conducted, and, when machining, the tool life has been recorded, thus allowing to obtain the coefficient of variation for high production run of tool. Comparison of coefficients of variation resulted in offering the tool material, process environment, and operation conditions to improve the reliability of the technological system for the specific brands of corrosion resistant steels and alloys and tungsten.It is shown that the tool material and technological environment have the biggest influence on the tool life period T and its coefficient of variation varT. It is noted that materials with a complicated composition have the higher life volatility as compared with the resistance simple alloys. It is shown that an increasing cutting speed is reduced after a certain value of the coefficient of variation due to entrainment outgrowth formed on the cutting edge of the tool.The results obtained allow machining production engineers at the enterprises of serial

  4. Extension of operation regimes and investigation of three-dimensional current-less plasmas in the Large Helical Device

    International Nuclear Information System (INIS)

    Kaneko, O.

    2012-11-01

    The Large Helical Device (LHD) has shown the advantages of heliotron plasma for fusion reactor from operational point of view not only such as disruption free and steady state operation, but also as high density and stable high beta operation. Since the last Fusion Energy Conference in Daejon in 2010 (Yamada, 2011 Nucl. Fusion 51 094021), physical understanding as well as parameter improvement of net-current free helical plasmas has progressed successively. The current efforts are focused on optimization of plasma edge condition to extend the operation regime towards higher ion temperature and more stable high density. In LHD a part of open helical divertors are being modified to the baffle-structured closed ones to aim at active control of the edge plasma. It has been demonstrated that the neutral pressure in the closed helical divertor was more than 10 times higher than that in the open helical divertor. The central ion temperature has exceeded 7 keV. This high-T i plasma was obtained by a carbon pellet injection and the kinetic-energy confinement was improved by a factor of 1.5. Transport analysis of the high-T i plasmas has shown that the ion-thermal conductivity and the viscosity reduced after the pellet injection. Study of physics in 3-D geometry is highlighted in the topics of the response to Resonant Magnetic Perturbation such as ELM mitigation and divertor detachment. Novel approaches of non-local and non-diffusive transport have also been advanced. In this paper, highlighted results in these two years are overviewed. (author)

  5. Extension of the African regional co-operative agreement for research, development and training related to nuclear science and technology (AFRA)

    International Nuclear Information System (INIS)

    1998-01-01

    As of 31 January 1998, notifications of acceptance of the extension of the African Regional Co-operative Agreement for Research, Development and Training Related to Nuclear Science and Technology(INFCIRC/377), has been received by the Director General of the IAEA from the Governments of 21 African States. Uganda is added at the at the list of 20 African States reported in the previous addition to the document (INFCIRC/377/Add.8). Pursuant to Article XIV.2 of the original Agreement the extension entered into force on 4 April 1995, upon expiration of the original Agreement, and will remain in force for an additional period of 5 years, i.e. through 3 April 2000

  6. Extension of the African regional co-operative agreement for research, development and training related to nuclear science and technology (AFRA)

    International Nuclear Information System (INIS)

    1997-01-01

    As of 31 December 1996, notifications of acceptance of the extension of the African Regional Co-operative Agreement for Research, Development and Training Related to Nuclear Science and Technology (AFRA) (see INFCIRC/377), had been received by the Director General from the Governments of 20 African countries. Niger, Libya and Mali are added at the list of 17 countries reported in the previous addition of the document (INFCIRC/377/Add.7). Pursuant to Article XIV.2 of the original Agreement, the extension entered into force on 4 April 1995, upon expiration of the original Agreement, and will remain in force for an additional period of 5 years, i.e. through 3 April 2000

  7. Extension of the African regional co-operative agreement for research, development and training related to nuclear science and technology (AFRA)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-02-24

    As of 31 January 1998, notifications of acceptance of the extension of the African Regional Co-operative Agreement for Research, Development and Training Related to Nuclear Science and Technology(INFCIRC/377), has been received by the Director General of the IAEA from the Governments of 21 African States. Uganda is added at the at the list of 20 African States reported in the previous addition to the document (INFCIRC/377/Add.8). Pursuant to Article XIV.2 of the original Agreement the extension entered into force on 4 April 1995, upon expiration of the original Agreement, and will remain in force for an additional period of 5 years, i.e. through 3 April 2000.

  8. Extension of the African regional co-operative agreement for research, development and training related to nuclear science and technology (AFRA)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-02-28

    As of 31 December 1996, notifications of acceptance of the extension of the African Regional Co-operative Agreement for Research, Development and Training Related to Nuclear Science and Technology (AFRA) (see INFCIRC/377), had been received by the Director General from the Governments of 20 African countries. Niger, Libya and Mali are added at the list of 17 countries reported in the previous addition of the document (INFCIRC/377/Add.7). Pursuant to Article XIV.2 of the original Agreement, the extension entered into force on 4 April 1995, upon expiration of the original Agreement, and will remain in force for an additional period of 5 years, i.e. through 3 April 2000.

  9. A shared-world conceptual model for integrating space station life sciences telescience operations

    Science.gov (United States)

    Johnson, Vicki; Bosley, John

    1988-01-01

    Mental models of the Space Station and its ancillary facilities will be employed by users of the Space Station as they draw upon past experiences, perform tasks, and collectively plan for future activities. The operational environment of the Space Station will incorporate telescience, a new set of operational modes. To investigate properties of the operational environment, distributed users, and the mental models they employ to manipulate resources while conducting telescience, an integrating shared-world conceptual model of Space Station telescience is proposed. The model comprises distributed users and resources (active elements); agents who mediate interactions among these elements on the basis of intelligent processing of shared information; and telescience protocols which structure the interactions of agents as they engage in cooperative, responsive interactions on behalf of users and resources distributed in space and time. Examples from the life sciences are used to instantiate and refine the model's principles. Implications for transaction management and autonomy are discussed. Experiments employing the model are described which the authors intend to conduct using the Space Station Life Sciences Telescience Testbed currently under development at Ames Research Center.

  10. BWR internals life assurance

    International Nuclear Information System (INIS)

    Herrera, M.L.; Stancavage, P.P.

    1988-01-01

    Boiling water reactor (BWR) internal components play an important role in power plant life extension. Many important internals were not designed for easy removal and changes in material properties and local environmental effects due to high radiation makes stress corrosion cracking more likely and more difficult to correct. Over the past several years, operating experience has shown that inspection, monitoring and refurbishment can be accomplished for internal structures with existing technology. In addition, mitigation techniques which address the causes of degradation are available to assure that life extension targets can be met. This paper describes the many considerations and aspects when evaluating life extension for reactor vessel internals

  11. Wind turbine blade life-time assessment model for preventive planning of operation and maintenance

    DEFF Research Database (Denmark)

    Florian, Mihai; Sørensen, John Dalsgaard

    2014-01-01

    Out of the total wind turbine failure events, blade damage accounts for a substantial part, with some studies estimating it at around 23%. Current operation and maintenance (O&M) practices typically make use of corrective type maintenance as the basic approach, implying high costs for repair...... of information on the blades structural health to the decision maker. Further, inspections of the blades are often performed in connection with service. In light of the obtained information, a preventive type of maintenance becomes feasible, with the potential of predicting the blades remaining life to support O......&M decisions for avoiding major failure events. The present paper presents a fracture mechanics based model for estimating the remaining life of a wind turbine blade, focusing on the crack propagation in the blades adhesive joints. A generic crack propagation model is built in Matlab based on a Paris law...

  12. Wind Turbine Blade Life-Time Assessment Model for Preventive Planning of Operation and Maintenance

    DEFF Research Database (Denmark)

    Florian, Mihai; Sørensen, John Dalsgaard

    2015-01-01

    Out of the total wind turbine failure events, blade damage accounts for a substantial part, with some studies estimating it at around 23%. Current operation and maintenance (O&M) practices typically make use of corrective type maintenance as the basic approach, implying high costs for repair...... of information on the blades structural health to the decision maker. Further, inspections of the blades are often performed in connection with service. In light of the obtained information, a preventive type of maintenance becomes feasible, with the potential of predicting the blades remaining life to support O......&M decisions for avoiding major failure events. The present paper presents a fracture mechanics based model for estimating the remaining life of a wind turbine blade, focusing on the crack propagation in the blades adhesive joints. A generic crack propagation model is built in Matlab based on a Paris law...

  13. Evaluation of the integrity and duration of the Laguna Verde nuclear power plant life- Plant Life Management program (PLIM). TC MEX 04/53 Technical Cooperation Project; Evaluacion de la integridad y extension de vida de la planta de potencia nuclear Laguna Verde- Programa de manejo de vida de planta (PLIM). Proyecto de cooperacion tecnica TC MEX 04/53

    Energy Technology Data Exchange (ETDEWEB)

    Arganis J, C.R.; Diaz S, A.; Aguilar T, J.A. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)

    2006-07-01

    As part of the IAEA TC MEX 04/53 Project 'Evaluation of the integrity and extension of life of the Laguna Verde nuclear power plant Handling Program of plant' whose objective is the one of beginning the actions to apply the methodology of Handling of plant life in the Unit 1 of the Laguna Verde Nucleo electric Central for to obtain the Renovation of License in 2020 the ININ, through the Department of Synthesis and Characterization of materials has carried out more of 20 analysis of susceptibility to the intergranular cracking for corrosion under effort in interns so much of the reactor of the unit 1 like of the unit 2 documenting the current state of components based on the type or types of materials that conform them, to it thermomechanical history, operational and of production, as well as of the particularities associated to its use and operation. For the application of the methodology of life handling of plant 5 structure systems or pilot components were selected, to carry out the programs of handling of the aging and handling of plant life: The encircling of the reactor core (Core Shroud), the reactor pressure vessel (Reactor Pressure Vessel), the primary container (Primary Containment), the recirculation system of feeding water (Reactor Feed Water) and cables. (Author)

  14. Effect of gamma radiation on shellstock oysters. Extension of shelf-life and reduction in bacterial numbers, with particular reference to Vibrio vulnificus

    International Nuclear Information System (INIS)

    Dixon, D.W.; Rodrick, G.E.

    1998-01-01

    Shellstock oysters from Apalachicola Bay, Florida, United States of America, were irradiated at the nation's first commercial food irradiator, Vindicator, Inc. in Mulberry, Florida, with four doses, and analysed for their shelf-life and bacterial levels. A 2-3 log cycle reduction in bacterial numbers was observed at all the doses immediately after irradiation. The shelf-life was limited in that the D 50 values were found to be 30, 25, 7 and 6 days at 0.5, 1, 2 and 3 kGy, respectively. The D 20 values were calculated as 17, 9, 4 and 4 days at 0.5, 1, 2 and 3 kGy, respectively. Even though the bacterial numbers were significantly lower in the irradiated oysters, the shelf-life was reduced markedly at doses higher than 1 kGy. The irradiated shellstock did not demonstrate any extension in shelf-life, above that of the non-irradiated controls; in fact, they experienced a reduction in shelf-life and there was a growing back of the surviving organisms, which reached levels that were higher than those observed in the controls. Vibrio vulnificus demonstrated high radiosensitivity, with D 10 values of 0.062 and 0.037 kGy for the virulent and avirulent forms, respectively. Preliminary data indicate that the viable but non-culturable form of V. vulnificus is more radioresistant than the corresponding viable and culturable forms, but this needs further elucidation. Also, current research is directed at analysing the effects of the shell to meat ratio of the oysters, and how this affects their radioresistance. Furthermore, oysters from different locations have different shell to meat weight ratios, and this can influence the efficiency of radiation treatment. (author)

  15. Postharvest shelf-life extension of pink guavas (Psidium guajava L.) using HPMC-based edible surface coatings.

    Science.gov (United States)

    Vishwasrao, Chandrahas; Ananthanarayan, Laxmi

    2016-04-01

    Psidium guajava L. var. 'Lalit' is a perishable fruit with delicate skin which is prone to damage. The objective of this study was to determine the effect of edible coating made up of hydroxypropyl methyl cellulose and palm oil on ripening of guava. Coating solution was applied over fruits and coated fruits were stored at 24 ± 1 °C and 65 ± 5%RH. Changes in fruit colour, texture softening, respiration rate, weight loss, ascorbic acid content, soluble solids, titrable acidity, chlorophyll content, total reducing sugars, total phenolic content were studied during post-harvest ripening. Fruits coated with 1 % of hydroxypropyl methyl cellulose and 0.3 % of palm oil showed significant delay in weight loss, fruit firmness as well as colour change (p < 0.05). Coating delayed the enzyme activities of peroxidase and polyphenol oxidase of the fruit. Results suggest that overall quality of coated fruit was maintained by edible coating formulation extending the shelf life of fruit up to 12 days with appreciable retention of all quality parameters tested.

  16. Quality changes and shelf-life extension of ready-to-eat fish patties by adding encapsulated citric acid.

    Science.gov (United States)

    Bou, Ricard; Claret, Anna; Stamatakis, Antonios; Martínez, Brigitte; Guerrero, Luis

    2017-12-01

    Citric acid is commonly used as a flavoring and preservative in food and beverages. The effect of adding citric acid directly or encapsulated (each at 1 and 2 g kg -1 ) on the quality and shelf-life of ready-to-eat sea bass patties was evaluated during storage at 4 °C in vacuum skin packaging. Microbial growth and total basic volatile nitrogen were maintained at relatively low levels up to 8 weeks of storage. With respect to oxidative stability, the addition of encapsulated citric acid minimized secondary oxidation values more efficiently than its direct addition, regardless of the concentration. This is in agreement with the decreased fishy odor observed in those patties containing encapsulated citric acid. Accordingly, sensory analysis showed that the addition of encapsulated citric acid at 1 g kg -1 resulted in lower scores in fish aroma compared to that of the control. Sourness is dependent on the amount of citric acid added, regardless of the form (direct or encapsulated). The form of citric acid addition, rather than the amount of citric acid added, caused changes in texture. Therefore, the use of encapsulated citric acid represents a suitable strategy that is of great interest in the seafood industry. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

  17. Effect of gamma irradiation on shelf life extension, total counts of microbials and biochemical sensory change on luncheon meat

    International Nuclear Information System (INIS)

    Al-Bachir, M.; Mehyou, A.

    1999-11-01

    To investigate the effect of gamma irradiation and sodium nitrate on storability and marketability of luncheon, packed luncheon was exposed to several treatments; gamma irradiation at doses 0, 1, 2, 3 and 4 KGy using a 60 CO package irradiator, mixed with sodium nitrite (NaNO 2 ) 60 mg/Kg meat, with no irradiation and a combined treatment of both NaNO 2 treatment and irradiated with a dose of 2 KGy only. Half of the irradiated and unirradiated samples were stored in refrigeration (1-4 centigrade), to study storability and the second half were stored at room temperature (18-20 centigrade) to study marketability of luncheon. During storage period the population of microorganisms, biochemical changes and sensory properties were evaluated every two weeks for the refrigerated samples and weekly for the unrefrigerated samples. The results indicated that gamma irradiation and sodium nitrite reduced the counts of microorganisms and increased the shelf-life of luncheon. Both treatments (irradiation, sodium nitrite) increased total acidity, lipid oxidation, and the volatile basic nitrogen (VBN) immediately after processing and reduced all of them through out storage. Sensory evaluation (firmness, color, taste, and flavor) indicated no significant differences (P>0.05) between treated and untreated samples. (author)

  18. Effect of gamma irradiation on shelf life extension, total counts of microbials and biochemical sensory change on luncheon meat

    Energy Technology Data Exchange (ETDEWEB)

    Al-Bachir, M; Mehyou, A [Atomic Energy Commission, Dept. of Radiation Technology, Damascus (Syrian Arab Republic)

    1999-11-01

    To investigate the effect of gamma irradiation and sodium nitrate on storability and marketability of luncheon, packed luncheon was exposed to several treatments; gamma irradiation at doses 0, 1, 2, 3 and 4 KGy using a {sup 60} CO package irradiator, mixed with sodium nitrite (NaNO{sub 2}) 60 mg/Kg meat, with no irradiation and a combined treatment of both NaNO{sub 2} treatment and irradiated with a dose of 2 KGy only. Half of the irradiated and unirradiated samples were stored in refrigeration (1-4 centigrade), to study storability and the second half were stored at room temperature (18-20 centigrade) to study marketability of luncheon. During storage period the population of microorganisms, biochemical changes and sensory properties were evaluated every two weeks for the refrigerated samples and weekly for the unrefrigerated samples. The results indicated that gamma irradiation and sodium nitrite reduced the counts of microorganisms and increased the shelf-life of luncheon. Both treatments (irradiation, sodium nitrite) increased total acidity, lipid oxidation, and the volatile basic nitrogen (VBN) immediately after processing and reduced all of them through out storage. Sensory evaluation (firmness, color, taste, and flavor) indicated no significant differences (P>0.05) between treated and untreated samples. (author)

  19. Shelf life extension of Pacific white shrimp (Litopenaeus vannamei) using chitosan and ε-polylysine during cold storage.

    Science.gov (United States)

    Na, Soyoung; Kim, Jin-Hee; Jang, Hye-Jin; Park, Hee Jung; Oh, Se-Wook

    2018-05-01

    In this study, we examined the effects of an ε-polylysine (PL) and chitosan (CH) coating on the quality of shrimp under refrigeration. Pacific white shrimp (Litopenaeus vannamei) were coated with PL, CH, or CH + PL and stored at 4 °C for 15 days. The quality of shrimp was measured by observing changes in microbiota, pH, total volatile basic nitrogen (TVB-N), and sensory characteristics. Among the coating films, the CH + PL coating most effectively inhibited the growth of mesophilic and psychrotrophic bacteria, Pseudomonas spp., and H 2 S-producing bacteria. This coating increased the shelf life of shrimp by decreasing the amount of mesophilic and psychrotrophic bacteria, with inhibition greater than three log cycles on the ninth day of storage. In addition, the CH and CH + PL coatings effectively suppressed the formation of TVB-N compared with that in the control by 43% and 30%, respectively. The pH of all treated samples increased slowly compared with that of the control, but no significant difference was observed. Sensory quality was similar to microbial and physicochemical properties, and the acceptability of all treated samples gradually decreased. Copyright © 2018. Published by Elsevier B.V.

  20. Studies on sprout inhibition of potatoes and onions and shelf-life extensions of dates in Iraq

    International Nuclear Information System (INIS)

    Auda, H.; Khalaf, Z.

    1979-01-01

    Small scale experiments were carried out with onions and potatoes to examine the effect of gamma irradiation on sprout inhibition under different storage conditions. Doses of 15 to 20 krad caused some physical damage to potatoes stored in an incubator at 4 to 10 0 C and 40 to 70% relative humidity. This damage was also observed when potatoes have been stored at room temperature. Sprouting appeared after 30 to 60 days storage. The best results were obtained when a dose of 10 to 12 krad was used. Studies on onions irradiated and stored at room temperature for ten months showed that 6 to 9 krad gave the best results, extending the storage for 10 months. No sprouting could be detected throughout the storage period. Shelf-life and organoleptic study was done on four varieties of Iraqi dates at different stages of development. The results showed that the eating quality of fresh dates was not affected significantly by irradiation up to 270 krad and the duration of softening process (after-ripening) of dates was prolonged by low doses of 10 to 90 krad in the majority of the experimental batches. (author)

  1. Improvement Shelf-Life Extension of Apple by Pre storage Thermal Treatment, CaCl2 and Gamma Irradiation

    International Nuclear Information System (INIS)

    Salem, E.A.; Moussa, Z.

    2014-01-01

    This study was conducted to evaluate the efficiency of physical and chemical methods to extend the shelf life of apple fruits by control the blue mold disease causing by Penicillium expansum. Apple fruits are subjected to different temperatures between 38, and 50 degree C for 24 hr. and stored at 0 degree C for 4 months. Increasing in temperature caused decreasing in firmness and blue mold incidence percentage (%) caused by P. expansum. At 50 degree C the treated apple fruits gave sharp softness and inhibition of blue mold incidence (%) caused by P. expansum exposing for 4 days and cold storage at 0 degree C for 4 months and 5 days at 20 degree C. Dipping apple fruits in CaCl 2 at 2% and 4% decreased blue mold incidence (%) caused by P. expansum and increased apple fruits firmness at 2 and 4 months storage periods. Also, CaCl 2 treatments gave insignificant change in total soluble solid (TSS%) and in titratable acidity (TA%) of apple fruits. Gamma irradiation doses above 1 kGy significantly decreased firmness of apple fruits with the decrement being higher at higher doses.

  2. Evaluation of residual life of material of power plant construction elements after long-term operation

    International Nuclear Information System (INIS)

    Osasyuk, V.V.

    1989-01-01

    Existing methods are analyzed for estimation of residual resource of elements of constructions, working in creep conditions. A suggested and experimentally verified new method of residual durability forecasting is described permitting the value of the supplementary resource to be specified according to the real state of the material after preoperation. Evaluation results are given for residual life of steam lines received by different methods and advantages of the technique proposed are shown. Reliability of the new technique is confirmed by steam line operation at thermal power plants

  3. Social impact assessment of sugar production operations in South Africa : a social life cycle assessment perspective

    OpenAIRE

    2013-01-01

    M.Tech. (Quality and Operations Management) This paper focuses on the social impact of the sugar industry in South Africa. A social impact assessment is a method that aims to assess social features of the product and their positive and negative aspects in terms of its processing of raw material to the final stages of its disposal. The objectives of the study were guided by the guidelines on social life cycle assessment of products of the South African Sugar Industry developed by the United...

  4. Useful life extension of steam turbine rotors; Alargamiento de la vida en rotores de turbina de vapor

    Energy Technology Data Exchange (ETDEWEB)

    Garcia Arelle, Carlos [Turbomaquinas S. A. de C.V., La Piedad, Michoacan (Mexico)

    2007-11-15

    The continuous use of steam turbines, the chemistry of the steam itself and the variations of operation velocities, cause the gradual deterioration by erosion, oxidation and/or corrosion of the rotors and blades. When this happens most of the original manufacturers recommend to rectify the areas, diminishing the surfaces, or to compare with a new rotor. TURBOMAQUINARIAS S.A. de C.V. has developed the most reliable and safe methods to return the rotor to its original dimensions and in case of recurrent problems such as erosion, oxidation and/or wear, it offers the alternative of attaching coatings metallurgically compatible with which these problems are eliminated or diminished that might show up on the rotor surface as well as in the body of the discs or of the blades. These restoring methods are recommended by the international standards such as API 687. [Spanish] El uso continuo de las turbinas de vapor, la quimica del mismo vapor y la variacion de las velocidades de operacion, ocasionan el deterioro gradual por erosion, oxidacion y/o corrosion de los rotores y de los alabes. Al ocurrir esto la mayoria de los fabricantes originales recomiendan rectificar las areas, disminuyendo las superficies, o bien comparar un rotor nuevo. TURBOMAQUINARIAS S.A. de C.V. ha desarrollado los metodos mas confiables y seguros para devolver a su rotor las dimensiones originales y en caso de problemas recurrentes tales como erosion, oxidacion y/o desgaste, ofrece la alternativa de agregar recubrimientos metalurgicamente compatibles con los cuales se eliminan o se disminuyen estos problemas que pueden presentarse tanto en la superficie del rotor como del cuerpo de los discos o bien de los alabes. Estos metodos de restauracion son recomendados por las normas internacionales tales como la API 687.

  5. Should solar photovoltaics be deployed sooner because of long operating life at low, predictable cost?

    International Nuclear Information System (INIS)

    Zweibel, Ken

    2010-01-01

    Governments subsidize the deployment of solar photovoltaics (PV) because PV is deployed for societal purposes. About seven thousand megawatts were deployed in 2009 and over 10,000 are expected in 2010. Yet this is too slow to strongly affect energy and environmental challenges. Faster societal deployment is slowed because PV is perceived to be too costly. Classic economic evaluations would put PV electricity in the range of 15-50 c/kWh, depending on local sunlight and system size. But PV has an unusual, overlooked value: systems can last for a very long time with almost no operating costs, much like, e.g., the Hoover Dam. This long life is rarely taken into account. The private sector cannot use it because far-future cash flow does not add to asset value. But we should not be evaluating PV by business metrics. Governments already make up the difference in return on investment needed to deploy PV. PV deployment is government infrastructure development or direct purchases. Thus the question is: Does the usually unevaluated aspect of long life at predictably low operating costs further motivate governments to deploy more PV, sooner?

  6. Support of the Ukrainean Supervisory Authority during the extension of the improved operational NCP monitoring. Final report part III

    International Nuclear Information System (INIS)

    Beyer, M.; Carl, H.

    2005-05-01

    Technical systems to improve the operational monitoring for the three units of the South Ukraine NPP and for the 1 st unit of the Chmelnitzky NPP were put up by analogy with the systems for the Zaporoshye NPP and the Rovno NPP. For that up to 51 safety-relevant technological and 16 radiological parameters from every unit are available to the supervisory authority on-site and in the crisis centre in Kiev for collection and assessment. These parameters are transferred on-line by modern technical equipment once a minute. The developed evaluation software enables the visualisation of the monitoring results in form of diagrams, charts and graphs. By means of an archive modus the trends of all parameters can be analysed. With the integration of the technical equipment delivered for the sheltered room of the Zaporoshye NPP into the on-site existing remote monitoring system is it now possible to record and to evaluate essential safety-relevant parameters of the whole NPP also during severe accidents by means of modern technical equipment. (orig.)

  7. Is it possible to assure structural integrity and demonstrate life extension of older nuclear piping systems built to ASA B31.1?

    International Nuclear Information System (INIS)

    Burr, T.K.; Hawkes, G.L.; Morton, D.K.; Pace, N.E.

    1990-01-01

    Among the issues associated with older non-commercial reactors and irradiation facilities are (a) whether plant system designs are adequate relative to current industry standards and (b) whether degradation due to system aging adversely challenges the required margins of safety. These issues are being addressed at the Advanced Test Reactor (ATR) as part of a continuous effort to assure that ATR plant systems and safety analyses are consistent with state-of-the-art technology, evolving industry standards, and lessons learned from industry experience (e.g., Three Mile Island and Chernobyl). This paper presents a methodology for reevaluating loop experiment facility piping systems relative to concepts contained in the current ASME Boiler and Pressure Vessel Code, Section 3 and Section 11. Insights gained on the challenges associated with reevaluating older piping systems for structural adequacy and life extension considerations are discussed. 14 refs., 3 figs

  8. A new tool for life cycle inventories of agricultural machinery operations

    Directory of Open Access Journals (Sweden)

    Daniela Lovarelli

    2016-03-01

    Full Text Available The interest in environmental assessments about agricultural processes is fast growing and asking for new tools for accurate impact evaluations. The methodology commonly used to go through these studies is the life cycle assessment, of which the inventory phase (life cycle inventory, LCI is an essential step. For studies focusing on agricultural productions, the completion of LCI is particularly complex: taking into account the pedo-climatic and mechanical operative variability is evidently difficult. However, the prediction of the environmental impact of mechanical operations caused by the agricultural sector is essential to quantify the impact categories for which it is responsible. A new tool, ENVIAM, was developed to complete LCI to guarantee the availability of local data that describe the mechanical and pedo-climatic conditions occurring in the Po Valley area and widely applicable as well. It calculates mechanical power requests, directly consumed inputs (i.e., fuel, lubricant and material consumption of a productive system by taking into account soil texture, specific machinery operations and coupling solutions as defined by the user. A subdivision of working time and defined engine load have been considered to calculate fuel consumption; with regard to outputs, exhaust gases emissions from internal combustion engines have been assessed by evaluating the emissive stages of belonging as stated by the EU Directive. A case study was also performed to highlight the differences that occur when an analysis is fulfilled in a context with features different from the average, and resulted in significant variations for the inventory. In more details, a comparison was carried out both with Ecoinvent database and within ENVIAM. With regard to fuel consumption, by changing the soil texture, the analysis showed a range between 64%-184% for sandy and clay soils, respectively, if compared with medium texture ones. With this tool, local contexts defined

  9. Operational energy in the life cycle of residential dwellings: The experience of Spain and Colombia

    International Nuclear Information System (INIS)

    Ortiz, Oscar; Castells, Francesc; Sonnemann, Guido

    2010-01-01

    Life Cycle Assessment (LCA) has been applied within the residential building sector of two buildings, one in each a developed (Spain) and a developing (Colombia) country. The main goal of this paper involves the environmental loads and also brings together the operational energy for activities during the operation phase such as HVAC, domestic hot water, electrical appliances, cooking and illumination. The present research compares two real scenarios: Situation 1, where 100% of the dwelling's energy is supplied with electricity only and Situation 2, where dwellings can be operated with natural gas plus electricity. The results for the environmental impacts using natural gas plus electricity show that of the Spanish environmental impacts air conditioning had the highest impact with approximately 27-42% due to the electricity used to power it. In Colombian results showed that electrical appliances had the highest environmental impacts in the same order of magnitude with approximately 60% and cooking had the best reduction of emissions due to the use of natural gas, from 10% down to less than 2%. The origin of the energy source used in each Country plays an important role to minimize environmental impacts, as was demonstrated by the environmental impacts of its use in Colombia where 78% of the electricity came from hydroelectric plants whereas in Spain it is more mixed, fossil fuels represented 55%, nuclear 18% and wind 9%. In summary, LCA has been applied because this methodology supports the decision making to concern environmental sustainability.

  10. Overview of plant life management for long term operation in nuclear power plants

    International Nuclear Information System (INIS)

    Kang, K.S.; Vincze, P.; Bychkov, A.

    2014-01-01

    Many IAEA member states have given high priority to licensing their nuclear power plants to operate for terms longer than the time frame originally anticipated (generally 40 years). The task of managing plant ageing is assigned in most member states to an engineering specialty called 'plant life management' (PLiM) applying a systematic analysis methodology to System Structure Components (SSCs) ageing. In many countries, the safety performance of nuclear power plants is periodically assessed and characterized via the periodic safety review (PSR) process. Regulatory review and acceptance of PSRs constitutes for these countries the licensing requirement for continued operation of the plant to the following PSR cycle (usually 10 years). In the USA and in other countries operating US designed plants, instead of PSR process, a license renewal application (LRA) process is followed, which requires certain prerequisites such as ageing management programs, particularly for passive irreplaceable SSCs. Active components are normally addressed via the maintenance rule (MR) requirements and other established regulatory processes. A third group of member states have adopted a combined approach that incorporates elements of both the PSR process and selected LRA specific requirements, such as time limited ageing analysis. The article ends with some IAEA recommendations for the implementation of national PLiM programs

  11. Effect of peri-operative chemotherapy on the quality of life of patients with early breast cancer

    NARCIS (Netherlands)

    Kiebert, G. M.; Hanneke, J.; de Haes, J. Hanneke C. J. M.; Kievit, J.; van de Velde, C. J.

    1990-01-01

    Since chemotherapy is assumed to have a negative impact on quality of life, the impact of peri-operative chemotherapy on physical, psychological and social well-being and on the activity level of patients with early stage breast cancer was investigated. 24 women received peri-operative chemotherapy

  12. Energy consumption during the building life cycle – influence of investment activities and operations

    Directory of Open Access Journals (Sweden)

    Vytlačil Dalibor

    2018-01-01

    Full Text Available The paper describes the dynamic model of maintenance and investments of a building structure and HVAC systems. The aim of the research is finding the time dependent curve for energy consumption and also the cash flow that depends on the investments to energy saving arrangements and operations. The solution is based on the system dynamics method. The method makes possible to interconnect technical and economic parts of the problem. The main parameter in the model is the energy consumption in the building per floor square meter and year. This parameter is influenced by a deterioration of the building structure and the components of the active elements. The investments realized with the aim to decrease the energy consumption is another influence. The example of the computer simulation of the building parameters during the life cycle is presented in the paper.

  13. Life extension of German nuclear power plants only with the consent of the Federal Council? The importance and extent of the need for consent to an amendment to the German Atomic Energy Act

    International Nuclear Information System (INIS)

    Schneider, Horst

    2010-01-01

    In its coalition agreement of October 26, 2009, the new German federal government plans ''to extend the service life of German nuclear power plants while, at the same time, complying with the strict German and international safety standards.'' This has triggered a debate not only about (nuclear) energy, as in the past election campaign in the summer of 2009, but also about the constitutional law issue whether an amendment to the Atomic Energy Act resulting in longer operating life of nuclear power plants required the consent of the Federal Council (the ''Bundesrat,'' the second chamber of parliament). After the election to the state parliament in North Rhine-Westphalia on May 9, 2010, majority in the Federal Council changed. As a consequence, no consent to an amendment to the Atomic Energy Act must be expected. In view of the large number of recent statements about constitutional law in opinions for various federal and ministerial accounts as well as firms and associations, the outline by R. Scholz in the May issue of atw 2010 will be followed in this issue by the key points of examination of the need for consent, under aspects of constitutional law, and an attempt will be made to explain the evaluations underlying the generation of a legal concept about these items. The decision by the German Federal Constitutional Court of May 4, 2010, published on June 11, 2010, plays a major role in this respect because it established clarity in some important aspects of a legal subject matter in the field of state admini-stration on behalf of the federation, albeit in the field of air traffic law, not nuclear law. However, the structures of the norms in the German Basic Law (Art. 87c and Art. 87d, para.2) to be applied are almost identical. The energy policy and energy economy aspects of a plant life extension are considered along with the option of an appeal to the Federal Constitutional Court against any plant life extension. Finally, the key findings are summarized briefly

  14. EFO-LCI: A New Life Cycle Inventory Database of Forestry Operations in Europe

    Science.gov (United States)

    Cardellini, Giuseppe; Valada, Tatiana; Cornillier, Claire; Vial, Estelle; Dragoi, Marian; Goudiaby, Venceslas; Mues, Volker; Lasserre, Bruno; Gruchala, Arkadiusz; Rørstad, Per Kristian; Neumann, Mathias; Svoboda, Miroslav; Sirgmets, Risto; Näsärö, Olli-Pekka; Mohren, Frits; Achten, Wouter M. J.; Vranken, Liesbet; Muys, Bart

    2018-06-01

    Life cycle assessment (LCA) has become a common methodology to analyze environmental impacts of forestry systems. Although LCA has been widely applied to forestry since the 90s, the LCAs are still often based on generic Life Cycle Inventory (LCI). With the purpose of improving LCA practices in the forestry sector, we developed a European Life Cycle Inventory of Forestry Operations (EFO-LCI) and analyzed the available information to check if within the European forestry sector national differences really exist. We classified the European forests on the basis of "Forest Units" (combinations of tree species and silvicultural practices). For each Forest Unit, we constructed the LCI of their forest management practices on the basis of a questionnaire filled out by national silvicultural experts. We analyzed the data reported to evaluate how they vary over Europe and how they affect LCA results and made freely available the inventory data collected for future use. The study shows important variability in rotation length, type of regeneration, amount and assortments of wood products harvested, and machinery used due to the differences in management practices. The existing variability on these activities sensibly affect LCA results of forestry practices and raw wood production. Although it is practically unfeasible to collect site-specific data for all the LCAs involving forest-based products, the use of less generic LCI data of forestry practice is desirable to improve the reliability of the studies. With the release of EFO-LCI we made a step toward the construction of regionalized LCI for the European forestry sector.

  15. The life cycle greenhouse gas emissions implications of power and hydrogen production for oil sands operations

    International Nuclear Information System (INIS)

    McKellar, J.M.; Bergerson, J.A.; MacLean, H.L.

    2009-01-01

    'Full text:' The Alberta Oil Sands represent a major economic opportunity for Canada, but the industry is also a significant source of greenhouse gas (GHG) emissions. One of the sources of these emissions is the use of natural gas for the production of electricity, steam and hydrogen. Due to concerns around resource availability and price volatility, there has been considerable discussion regarding the potential replacement of natural gas with an alternative fuel. While some of the options are non-fossil and could potentially reduce GHG emissions (e.g., nuclear, geothermal, biomass), others have the potential to increase emissions. A comparative life cycle assessment was completed to investigate the relative GHG emissions, energy consumption and financial implications of replacing natural gas with coal, coke, asphaltenes or bitumen for the supply of electricity, steam and hydrogen to oil sands operations. The potential use of carbon capture and storage (CCS) was also investigated as a means of reducing GHG emissions. Preliminary results indicate that, without CCS, the natural gas systems currently in use have lower life cycle GHG emissions than gasification systems using any of the alternative fuels analysed. However, when CCS is implemented in both the coke gasification and natural gas systems, the coke systems have lower GHG emissions and financial costs than the natural gas systems (assuming a 30-year project life and a natural gas price of 6.5 USD/gigajoule). The use of CCS does impose a financial penalty though, indicating that it is unlikely to be implemented without some financial incentive. While this study has limitations and uncertainties, the preliminary results indicate that although the GHG emissions of oil sands development pose a challenge to Canada, there are opportunities available for their abatement. (author)

  16. Wind Turbine Blade Life-Time Assessment Model for Preventive Planning of Operation and Maintenance

    Directory of Open Access Journals (Sweden)

    Mihai Florian

    2015-09-01

    Full Text Available Out of the total wind turbine failure events, blade damage accounts for a substantial part, with some studies estimating it at around 23%. Current operation and maintenance (O&M practices typically make use of corrective type maintenance as the basic approach, implying high costs for repair and replacement activities as well as large revenue losses, mainly in the case of offshore wind farms. The recent development and evolution of condition monitoring techniques, as well as the fact that an increasing number of installed turbines are equipped with online monitoring systems, offers a large amount of information on the blades structural health to the decision maker. Further, inspections of the blades are often performed in connection with service. In light of the obtained information, a preventive type of maintenance becomes feasible, with the potential of predicting the blades remaining life to support O&M decisions for avoiding major failure events. The present paper presents a fracture mechanics based model for estimating the remaining life of a wind turbine blade, focusing on the crack propagation in the blades adhesive joints. A generic crack propagation model is built in Matlab based on a Paris law approach. The model is used within a risk-based maintenance decision framework to optimize maintenance planning for the blades lifetime.

  17. Experiences with the technical cooperation project TC MEX 04/53. Evaluation of the integrity and extension of life of the Laguna Verde nuclear power plant. Management program of the plant life (PLIM)

    International Nuclear Information System (INIS)

    Arganis J, C.R.; Aguilar T, J.A.; Guevara M, A.; Garcia M, C.; Martinez G, R.R.; Griz C, M.M.; Sanchez M, M.A.; Diaz O, R.C.

    2006-01-01

    In the biennium 2005-2006 the project of technical cooperation with the International Atomic Energy Agency OIEA TC MEX 04/53 'Evaluation of the integrity and extension of life of the Laguna Verde nuclear power plant Plant life handling program (PLIM)' was approved, which has as objective the one to begin the actions to apply the methodology of Handling of life of Plant (PLIM) in the Unit I (Ul) of the Laguna Verde Nucleo electric Central (CNLV), in order to obtain the Renovation of License (LR), in a long term (2020). To apply this methodology 5 systems they were selected, structures or components (SEC) to carry out the handling programs of the one aging (AMP), and PLIM which are: The encircling of the reactor core (Core Shroud), the pressure vessel of the reactor (Reactor Pressure Vessel), the one primary container (Primary Containment), the system of feeding water (Reactor Feed Water) and cables, which were not in this work to be of another nature. The report presents the more important aspects considered in these systems for their programs of AMP and PLIM, as like a revision of those selection processes and evaluation (screening and scoping) for the application of PLIM in the systems of the Ul of the CNLV. (Author)

  18. Collaborative machining solution extends the operating life of a nuclear power plant

    International Nuclear Information System (INIS)

    Gilmore, Geoff; Becker, Andrew; Vandenberg, James

    2007-01-01

    Examination of a CANDU 6 nuclear power plant's steam generators during a scheduled maintenance outage revealed that the manway ports, part of the ASME Section III, Class 1 pressure boundary, needed repair. The port's inner cover gasket was not seating properly. Integrity was at risk. It was determined that this operation would required a specialized machine to successfully repair the manway port. The solution included the modification of a standard portable boring machine with a custom mounting option to enlarge the counterbore in the primary head shell from a round shape to an obround shape (76 mm of shell thickness, 16 mm radially). The shape change was needed to accommodate the new obround cover and gasket seal design. Once the new major shape was machined, the repair was finished with a Computer Numerically Controlled (CNC) machine developed by the service team to achieve the necessary gasket face location and sizing. The final result met all of the plant's expectations and was completed well within the time allotted during the maintenance shut down. This success was due to the positive partnership and collaboration of the service team and the machine tool manufacture working together to successfully extend the operating life of the nuclear power plant. (author)

  19. Handbook on Life Cycle Assessment. Operational Guide to the ISO Standards

    Energy Technology Data Exchange (ETDEWEB)

    Guinee, J.B. [Centre of Environmental Studies, Leiden University, Leiden (Netherlands)

    2002-04-01

    In 1992 the Centre of Environmental Science (CML) at Leiden University, The Netherlands, published a Guide on Environmental Life Cycle Assessment (LCA) methodology, setting the standard for a long time. Since then LCA methodology has progressed enormously and the International Organization for Standardization (ISO) has published a series of Standards on LCA. These developments have now been incorporated into a new Handbook on LCA authored by CML in cooperation with a number of other important institutes in the area of LCA. The general aim of this Handbook on LCA is to provide a stepwise 'cookbook' with operational guidelines for conducting an LCA study step-by-step, justified by a scientific background document, based on the ISO Standards for LCA. The different ISO elements and requirements are made operational to the 'best available practice' for each step. CML is strongly involved in the development of a standard methodology to determine environmental impacts of products, i.e., LCA. This is done within international fora such as the Society for Environmental Toxicology and Chemistry (SETAC), the International Organization for Standardization (ISO), and the United Nations Environmental Programme (UNEP)

  20. The IAEA network on environmental management and remediation (ENVIRONET) - promoting sustainable uranium production operations by taking environmental remediation under a life-cycle perspective

    International Nuclear Information System (INIS)

    Monken-Fernandes, H.

    2010-01-01

    Some of the past uranium production operations have caused extensive environmental problems. The lack of appropriate regulatory framework in addition to the fact that environmental issues were not conveniently addressed in the operations contributed to this situation. Nowadays, this situation has changed dramatically and lessons learned from the past have led to the implementation of responsible operations from both environmental and social perspectives. Involvement of different stakeholders in the decision making process turned out to be a mandatory issue in many countries. With the so called 'Renascence of Nuclear Power' new production sites will come into play. The sustainability of the uranium industry will depend on the adoption of good practices in these operations under a life-cycle perspective. The recently launched IAEA initiative - the ENVIRONET is aimed at contributing to expedite the transfer of experience amongst its members. It brings together private and state-owned companies, research institutes, and governmental organizations providing a forum for information and experience exchange. Sharing of practical experience is to be addressed by means of training courses and workshops. In addition to this long distance training and educational material will be made available. This paper will present the ENVIRONET and describe how networking can contribute to the implementation of sustainable and responsible uranium production operations worldwide. (author)

  1. Assessment of quality of life in patients with non-operated pancreatic cancer after videothoracoscopic splanchnicectomy

    Directory of Open Access Journals (Sweden)

    Jacek Śmigielski

    2011-09-01

    Full Text Available Introduction: Pancreatic tumours are a crucial medical issue. The majority of patients report sick in the late stage ofcarcinoma clinical advancement, which considerably limits the possibility of surgical treatment. Pancreatic cancerpatients with no other alternative but palliative treatment constitute a large group.Aim: To assess pain intensity levels and quality of life of pancreatic cancer patients after videothoracoscopic splanchnicectomy.Material and methods: Between 2001 January and 2010 November in the Department of Thorax, General Surgery andOncology of the Medical University of Lodz 262 patients with pancreatic tumours were hospitalized. In 121 casesgrade 3 and grade 4 tumours were observed. Hundred and twenty-one videothoracoscopic procedures of sympathetictrunk and ganglion excision were performed in 89 patients.Results: Before the procedure the pain intensity level according to VAS was 5.66 (3.9-7.2; SD 1.24 in the trial groupand 5.46 (4.1-7.1; SD 1.15 in the control group. The quality of life average assessment in both groups did not differ statistically(p = 1.07 and was 46.3 (32-66; SD 0.92 in patients before the operation and in the control group 50.3(41-63; SD 0.75. On the 7th postoperative day the pain intensity on average was 2.33 (1.2-3.9; SD 0.78 and 4.57(3.6-5.5; SD 0.69 respectively. One week after the procedure the quality of patients’ life was estimated at 64.1(39-83; SD 1.38 and in the control group at 52.2 (42-65; SD 0.71; the differences are significant (p < 0.05. Thirty daysafter the procedure 12 patients did not t ake any painkillers (13.5%, and in the others a considerable decrease of thetaken drugs was observed. On average, the pain intensity was estimated at 1.78 (0.6-3.6; SD 0.68. The quality of life,on the other hand, improved considerably in relation to the state prior to the procedure, but increased insignificantlyin relation to the state on the 7th postoperative day to 70.9 (52-88; SD 1.14.Conclusions

  2. Use of Plantago major seed mucilage as a novel edible coating incorporated with Anethum graveolens essential oil on shelf life extension of beef in refrigerated storage.

    Science.gov (United States)

    Behbahani, Behrooz Alizadeh; Shahidi, Fakhri; Yazdi, Farideh Tabatabaei; Mortazavi, Seyed Ali; Mohebbi, Mohebbat

    2017-01-01

    In this study, Plantago major seed mucilage (PMSM) was extracted from whole seeds using hot-water extraction (HWE). The dill (D) essential oil components were identified through gas chromatography (GC) and gas chromatography/mass spectrometry (GC/MS) and its antioxidant properties were examined through the methods of 2,2-diphenyl-1-picrylhydrazyl (DPPH), ferric reducing antioxidant potential (FRAP) and ß-carotene-linoleic acid assay (B-CL). Total phenolic content (TPC) was characterized through the Folin-Ciocalteu method and the antimicrobial effect was evaluated on 10 pathogenic microorganisms. PMSM edible coating incorporated were prepared in four different concentrations of essential oils, including 0, 0.5, 1 and 1.5% (w/w). The control and the coated beef samples were analyzed periodically for microbiological (total viable count, psychrotrophic count, Escherichia coli, Staphylococcus aureus and fungi), chemical (thiobarbituric acid, peroxide value and pH), and sensory characteristics. The IC 50 , FRAP, B-CL and TPC of the dill essential oil were equal to 11.44μg/ml, 9.45mmol/g, 82.86 and 162.65μg/ml GAE, respectively. PMSM extended the microbial shelf life of beef by 3days, whereas the PMSM+0.5%D, PMSM+1%D and PMSM+1.5%D resulted in a significant shelf life extension of the beef by 6, 9 and 9days, respectively, as compared to the control samples. Copyright © 2016 Elsevier B.V. All rights reserved.

  3. Remaining useful life estimation in heterogeneous fleets working under variable operating conditions

    International Nuclear Information System (INIS)

    Al-Dahidi, Sameer; Di Maio, Francesco; Baraldi, Piero; Zio, Enrico

    2016-01-01

    The availability of condition monitoring data for large fleets of similar equipment motivates the development of data-driven prognostic approaches that capitalize on the information contained in such data to estimate equipment Remaining Useful Life (RUL). A main difficulty is that the fleet of equipment typically experiences different operating conditions, which influence both the condition monitoring data and the degradation processes that physically determine the RUL. We propose an approach for RUL estimation from heterogeneous fleet data based on three phases: firstly, the degradation levels (states) of an homogeneous discrete-time finite-state semi-markov model are identified by resorting to an unsupervised ensemble clustering approach. Then, the parameters of the discrete Weibull distributions describing the transitions among the states and their uncertainties are inferred by resorting to the Maximum Likelihood Estimation (MLE) method and to the Fisher Information Matrix (FIM), respectively. Finally, the inferred degradation model is used to estimate the RUL of fleet equipment by direct Monte Carlo (MC) simulation. The proposed approach is applied to two case studies regarding heterogeneous fleets of aluminium electrolytic capacitors and turbofan engines. Results show the effectiveness of the proposed approach in predicting the RUL and its superiority compared to a fuzzy similarity-based approach of literature. - Highlights: • The prediction of the remaining useful life for heterogeneous fleets is addressed. • A data-driven prognostics approach based on a Markov model is proposed. • The proposed approach is applied to two different heterogeneous fleets. • The results are compared with those obtained by a fuzzy similarity-based approach.

  4. Optimisation of battery operating life considering software tasks and their timing behaviour

    Energy Technology Data Exchange (ETDEWEB)

    Lipskoch, Henrik

    2010-02-19

    Users of mobile embedded systems have an interest in long battery operating life. The longer a system can operate without need for recharge or battery replacement, the more will maintenance cost and the number of faults due to insufficient power supply decrease. Operating life is prolonged by saving energy, which may reduce available processing time. Mobile embedded systems communicating with other participants like other mobiles or radio stations are subject to time guarantees ensuring reliable communication. Thus, methods that save energy by reducing processing time are not only subject to available processing time but subject to the embedded system's time guarantees. To perform parameter optimisations offline, decisions can be taken early at design time, avoiding further computations at run-time. Especially, to compute processor shutdown durations offline, no extra circuitry to monitor system behaviour and to wake up the processor needs to be designed, deployed, or power supplied: only a timer is required. In this work, software tasks are considered sharing one processor. The scheduling algorithm earliest deadline first is assumed, and per-task, a relative deadline is assumed. Tasks may be instantiated arbitrarily as long as this occurrence behaviour is given in the notion of event streams. Scaling of the processor's voltage and processor shutdown are taken into account as methods for saving energy. With given per task worst-case execution times and the tasks' event streams, the real-time feasibility of the energy optimised solutions is proven. The decision which energy saving solution provides longest operating life is made with the help of a battery model. The used real-time feasibility test has the advantage that it can be approximated: this yields an adjustable number of linear optimisation constraints. Reducing the processor's voltage reduces processor frequency, therefore, execution times increase. The resulting slowdown becomes the

  5. Optimisation of battery operating life considering software tasks and their timing behaviour

    Energy Technology Data Exchange (ETDEWEB)

    Lipskoch, Henrik

    2010-02-19

    Users of mobile embedded systems have an interest in long battery operating life. The longer a system can operate without need for recharge or battery replacement, the more will maintenance cost and the number of faults due to insufficient power supply decrease. Operating life is prolonged by saving energy, which may reduce available processing time. Mobile embedded systems communicating with other participants like other mobiles or radio stations are subject to time guarantees ensuring reliable communication. Thus, methods that save energy by reducing processing time are not only subject to available processing time but subject to the embedded system's time guarantees. To perform parameter optimisations offline, decisions can be taken early at design time, avoiding further computations at run-time. Especially, to compute processor shutdown durations offline, no extra circuitry to monitor system behaviour and to wake up the processor needs to be designed, deployed, or power supplied: only a timer is required. In this work, software tasks are considered sharing one processor. The scheduling algorithm earliest deadline first is assumed, and per-task, a relative deadline is assumed. Tasks may be instantiated arbitrarily as long as this occurrence behaviour is given in the notion of event streams. Scaling of the processor's voltage and processor shutdown are taken into account as methods for saving energy. With given per task worst-case execution times and the tasks' event streams, the real-time feasibility of the energy optimised solutions is proven. The decision which energy saving solution provides longest operating life is made with the help of a battery model. The used real-time feasibility test has the advantage that it can be approximated: this yields an adjustable number of linear optimisation constraints. Reducing the processor's voltage reduces processor frequency, therefore, execution times increase. The resulting slowdown becomes the optimisation variable

  6. Grasping and Placing Operation for Labware Transportation in Life Science Laboratories using Mobile Robots

    Directory of Open Access Journals (Sweden)

    Mohammed Myasar Ali

    2017-07-01

    Full Text Available In automated working environments, mobile robots can be used for different purposes such as material handling, domestic services, and objects transportation. This work presents a grasping and placing operation for multiple labware and tube racks in life science laboratories using the H20 mobile robots. The H20 robot has dual arms where each arm consists of 6 revolute joints with 6-DOF and 2-DOF grippers. The labware, which have to be manipulated and transported, contain chemical and biological components. Therefore, an accurate approach for object recognition and position estimation is required. The recognition and pose estimation of the desired objects are very essential to guide the robotic arm in the manipulation tasks. In this work, the problem statement of H20 transportation system with the proposed methodology are presented. Different strategies (visual and non-visual of labware manipulation using mobile robots are described. The H20 robot is equipped with a Kinect V2 sensor to identify and estimate the position of the target. The local features recognition based on SURF algorithm (Speeded-Up Robust Features is used. The recognition process is performed for the required labware and holder to perform the grasping and placing operation. A strategy is proposed to find the required holder and to check its emptiness for the placing tasks. Different styles of grippers and labware containers are used to manipulate different weights of labware and to realize a safe transportation. The parts of mobile robot transportation system are communicated with each other using Asynchronous socket Channels.

  7. [Discussion on Quality Evaluation Method of Medical Device During Life-Cycle in Operation Based on the Analytic Hierarchy Process].

    Science.gov (United States)

    Zheng, Caixian; Zheng, Kun; Shen, Yunming; Wu, Yunyun

    2016-01-01

    The content related to the quality during life-cycle in operation of medical device includes daily use, repair volume, preventive maintenance, quality control and adverse event monitoring. In view of this, the article aims at discussion on the quality evaluation method of medical devices during their life cycle in operation based on the Analytic Hierarchy Process (AHP). The presented method is proved to be effective by evaluating patient monitors as example. The method presented in can promote and guide the device quality control work, and it can provide valuable inputs to decisions about purchase of new device.

  8. Multicriteria optimization approach to design and operation of district heating supply system over its life cycle

    Science.gov (United States)

    Hirsch, Piotr; Duzinkiewicz, Kazimierz; Grochowski, Michał

    2017-11-01

    District Heating (DH) systems are commonly supplied using local heat sources. Nowadays, modern insulation materials allow for effective and economically viable heat transportation over long distances (over 20 km). In the paper a method for optimized selection of design and operating parameters of long distance Heat Transportation System (HTS) is proposed. The method allows for evaluation of feasibility and effectivity of heat transportation from the considered heat sources. The optimized selection is formulated as multicriteria decision-making problem. The constraints for this problem include a static HTS model, allowing considerations of system life cycle, time variability and spatial topology. Thereby, variation of heat demand and ground temperature within the DH area, insulation and pipe aging and/or terrain elevation profile are taken into account in the decision-making process. The HTS construction costs, pumping power, and heat losses are considered as objective functions. Inner pipe diameter, insulation thickness, temperatures and pumping stations locations are optimized during the decision-making process. Moreover, the variants of pipe-laying e.g. one pipeline with the larger diameter or two with the smaller might be considered during the optimization. The analyzed optimization problem is multicriteria, hybrid and nonlinear. Because of such problem properties, the genetic solver was applied.

  9. Life cycle of transformer oil

    OpenAIRE

    Đurđević Ksenija R.; Vojinović-Miloradov Mirjana; Sokolović Slobodan M.

    2008-01-01

    The consumption of electric power is constantly increasing due to industrialization and population growth. This results in much more severe operating conditions of transformers, the most important electrical devices that make integral parts of power transmission and distribution systems. The designed operating life of the majority of worldwide transformers has already expired, which puts the increase of transformer reliability and operating life extension in the spotlight. Transformer oil pla...

  10. An assessment of quality of life of operated cases of esophageal atresia in the community

    Directory of Open Access Journals (Sweden)

    Harshjeet Singh Bal

    2016-01-01

    Full Text Available Aims: To evaluate the outcome of the operated children of esophageal atresia (EA focusing on their early and late morbidity and mortality and quality of life (QoL of survivors. Settings and Design: A cross-sectional follow-up with retrospective analysis of available medical and surgical records of children who underwent repair for EA. Materials and Methods: The medical records of the children who underwent repair for EA during the period from 2000 to 2011 at the Christian Medical College Hospital, Vellore, were collected retrospectively. Patients with parents were invited to visit the hospital for follow-up and nutritional status, digestive and respiratory symptoms, status of associated anomalies and QoL assessment of children done. QoL assessment was done using the PedsQL™ 4.0 generic core scales questionnaire comprising 4 scale scores: physical, emotional, social functioning, and school functioning. Mean scores are calculated based on a 5-point response scale for each item and transformed to a 0-100 scale with a higher score representing better QoL. Statistical Analysis Used: Statistical Package for Social Sciences (SPSS version 16 using Chi-square or Fisher′s exact test. Results: Of 79 patients operated during the said period, there were 10 deaths and a total of 69 (87% children survived. Of the 66 patients available for follow-up, we interviewed 30 parents and children while for the remaining 36 children, out-patients charts were reviewed retrospectively. Mean follow-up duration was 3.56 years. The height and weight for age measurement showed 47% and 56% of children respectively as below the 5 th percentile. Main problems faced by operated EA children were of the respiratory (26% and gastroesophageal (36% tracts. In spite of the mentioned problems faced, the overall QoL of this group appeared good. In 23 of 30 patients, who answered PedsQL™ , more than 70% had scores >85 out of 100 in QoL scoring. Conclusions: While survivals of the

  11. Studies and development of essential systems in the surveillance program, life extension potential of the vessel and master curve in nuclear power plants

    International Nuclear Information System (INIS)

    Romero C, J.; Hernandez C, R.; Rocamontes A, M.; Perez R, N.

    2010-01-01

    The nuclear power plants owners should demonstrate that the effects of the embrittlement by neutronic radiation do not commit the structural integrity of the pressure vessel of the nuclear reactors, so much under conditions of routine operation as below an accident postulate. In consequence, in Mexico surveillance programs of the vessels of the nuclear power plant of Laguna Verde exist, in which three surveillance capsules are have by reactor. A surveillance capsule is composed by a support and between six and eight containers for test tubes and dosemeters. The containers for test tubes are of two types: rectangular container for Charpy V test tubes and cylindrical container for tension test tubes. These test tubes are subject to a same or bigger neutronic flow that of the vessel, being representative witness of the mechanical conditions of the vessel. The objective of to assay the test tubes to impact is to evaluate the embrittlement grade of the vessel beforehand during its useful life of operation, as well as to determinate the running of the ductile-fragile transition temperature in function of the time. (Author)

  12. Preventive maintenance and life time assessment with respect to cyclic operation; Foerebyggande underhaall och livslaengdsbedoemning med avseende paa cyklisk drift

    Energy Technology Data Exchange (ETDEWEB)

    Storesund, Jan

    2011-03-15

    Procedures that may be used for the life time assessments and growth laws for failure mechanisms with respect to cyclic operation has been compiled. Experience and analyzes of the effects of cyclical operation of steam drums, steam boxes, steam accumulators and valves has been compiled. For the strain-induced corrosion cracking in steam drums a correlation between the voltage level and the crack growth rate has been developed.

  13. Life Modeling for Nickel-Hydrogen Batteries in Geosynchronous Satellite Operation

    National Research Council Canada - National Science Library

    Zimmerman, A. H; Ang, V. J

    2005-01-01

    .... The model has been used to predict how properly designed and operated nickel-hydrogen battery lifetimes should depend on the operating environments and charge control methods typically used in GEO operation...

  14. What the French think about the operational life of nuclear power plants

    International Nuclear Information System (INIS)

    Suteau, R.

    2014-01-01

    A recent opinion survey has been organized to assess how the issue of the lifetime extension of nuclear power plants was understood by the man on the street in France. 20 people have been interviewed after participating to a meeting in which 3 experts from different opinions on nuclear energy have shared their vision of lifetime extension. It appears that lifetime extension is not considered as an issue in itself but belongs to a more important issue that is the future of nuclear energy. Most people do not disagree with the idea of lifetime extension if this extension does not go beyond 10 years and their agreement is strongly correlated with other issues like the management of radioactive waste, the quality and follow-up of sub-contractors and the real alternatives to nuclear energy. 5 profile types have been identified from the most reluctant to the use of nuclear energy who consider lifetime extension as a leap forward in the bad direction to the most confident who agree with both nuclear energy and lifetime extension strategy. (A.C.)

  15. Maintenance, rehabilitation, long life-the CANDU potential

    International Nuclear Information System (INIS)

    Torgerson, D.F.; Charlebois, P.; Hopkins, J.

    1998-01-01

    Plant life extension beyond the original design life is becoming an attractive economic consideration in the nuclear industry. Plant Life Management and life extension considerations have been built into the complete life cycle of the CANDU plant. The plant life management studies demonstrate that life extension for operating plants beyond 30 years is economically viable. The new CANDU designs benefit from this experience feedback and as a result, the plant design basis is now 40 years or better with potential for economical life extension. AECL is therefore confident that the new CANDU designs will exceed the performance record of the first generation CANDU 6 units and is committed to providing continued support and services during the operating life of the plant

  16. The need for operating guidelines and a decision making framework applicable to the discovery of non-intelligent extraterrestrial life

    Science.gov (United States)

    Race, Margaret S.; Randolph, Richard O.

    While formal principles have been adopted for the eventuality of detecting intelligent life in our galaxy (SETI Principles), no such guidelines exist for the discovery of non-intelligent extraterrestrial life within the solar system. Current scientifically based planetary protection policies for solar system exploration address how to undertake exploration, but do not provide clear guidance on what to do if and when life is detected. Considering that martian life could be detected under several different robotic and human exploration scenarios in the coming decades, it is appropriate to anticipate how detection of non-intelligent, microbial life could impact future exploration missions and activities, especially on Mars. This paper discusses a proposed set of interim guidelines based loosely on the SETI Principles and addresses issues extending from the time of discovery through future handling and treatment of extraterrestrial life on Mars or elsewhere. Based on an analysis of both scientific and ethical considerations, there is a clear need for developing operating protocols applicable at the time of discovery and a decision making framework that anticipates future missions and activities, both robotic and human. There is growing scientific confidence that the discovery of extraterrestrial life in some form is nearly inevitable. If and when life is discovered beyond Earth, non-scientific dimensions may strongly influence decisions about the nature and scope of future missions and activities. It is appropriate to encourage international discussion and consideration of the issues prior to an event of such historical significance.

  17. Study of coherent Synchrotron Radiation effects by means of a new simulation code based on the non-linear extension of the operator splitting method

    International Nuclear Information System (INIS)

    Dattoli, G.; Schiavi, A.; Migliorati, M.

    2006-03-01

    The coherent synchrotron radiation (CSR) is one of the main problems limiting the performance of high intensity electron accelerators. The complexity of the physical mechanisms underlying the onset of instabilities due to CSR demands for accurate descriptions, capable of including the large number of features of an actual accelerating device. A code devoted to the analysis of this type of problems should be fast and reliable, conditions that are usually hardly achieved at the same rime. In the past, codes based on Lie algebraic techniques , have been very efficient to treat transport problems in accelerators. The extension of these methods to the non-linear case is ideally suited to treat CSR instability problems. We report on the development of a numerical code, based on the solution of the Vlasov equation, with the inclusion of non-linear contribution due to wake field effects. The proposed solution method exploits an algebraic technique, using exponential operators. We show that the integration procedure is capable of reproducing the onset of an instability and the effects associated with bunching mechanisms leading to the growth of the instability itself. In addition, considerations on the threshold of the instability are also developed [it

  18. Study of coherent synchrotron radiation effects by means of a new simulation code based on the non-linear extension of the operator splitting method

    International Nuclear Information System (INIS)

    Dattoli, G.; Migliorati, M.; Schiavi, A.

    2007-01-01

    The coherent synchrotron radiation (CSR) is one of the main problems limiting the performance of high-intensity electron accelerators. The complexity of the physical mechanisms underlying the onset of instabilities due to CSR demands for accurate descriptions, capable of including the large number of features of an actual accelerating device. A code devoted to the analysis of these types of problems should be fast and reliable, conditions that are usually hardly achieved at the same time. In the past, codes based on Lie algebraic techniques have been very efficient to treat transport problems in accelerators. The extension of these methods to the non-linear case is ideally suited to treat CSR instability problems. We report on the development of a numerical code, based on the solution of the Vlasov equation, with the inclusion of non-linear contribution due to wake field effects. The proposed solution method exploits an algebraic technique that uses the exponential operators. We show that the integration procedure is capable of reproducing the onset of instability and the effects associated with bunching mechanisms leading to the growth of the instability itself. In addition, considerations on the threshold of the instability are also developed

  19. Matrix elements of four-quark operators relevant to life time difference ΔΓBs from QCD sum rules

    International Nuclear Information System (INIS)

    Huang, C.S.; Zhang Ailin; Zhu, S.L.

    2001-01-01

    We extract the matrix elements of four-quark operators O L,S relevant to the B s and anti B s life time difference from QCD sum rules. We find that the vacuum saturation approximation works reasonably well, i.e., within 10%. We discuss the implications of our results and compare them with a recent lattice QCD determination. (orig.)

  20. Influence of accompanying immunocorrecting therapy on the quality of life of breast cancer patients at post-operative radiation therapy

    International Nuclear Information System (INIS)

    Prokhach, N.E.

    2013-01-01

    To investigate the influence of accompanying immunotherapy on the parameters of the quality of life of the patients with breast cancer with various profiles of cytokines at post-operative radiation therapy. The study was performed on 30 breast cancer patients at stages of combination therapy