WorldWideScience

Sample records for opera-experiments nach dem

  1. Status of the OPERA Experiment

    CERN Document Server

    Zimmermann, R.

    2006-01-01

    In this article the physics motivation and the detector design of the OPERA experiment will be reviewed. The construction status of the detector, which will be situated in the CNGS beam from CERN to the Gran Sasso laboratory, will be reported. A survey on the physics performance will be given and the physics plan in 2006 will be presented.

  2. The OPERA experiment Target Tracker

    CERN Document Server

    Adam, T; Borer, K.; Campagne, Jean-Eric; Con-Sen, N.; de La Taille, C.; Dick, N.; Dracos, M.; Gaudiot, G.; Goeltzenlichter, T.; Gornushkin, Y.; Grapton, J.-N.; Guyonnet, J.-L.; Hess, M.; Igersheim, R.; Janicsko Csathy, J.; Jollet, C.; Juget, F.; Kocher, H.; Krasnoperov, A.; Krumstein, Z.; Martin-Chassard, G.; Moser, U.; Nozdrin, A.; Olchevski, A.; Porokhovoi, S.; Raux, L.; Sadovski, A.; Schuler, J.; Schutz, H.-U.; Schwab, C.; Smolnikov, A.; Van Beek, G.; Vilain, P.; Walchli, T.; Wilquet, G.; Wurtz, J.

    2007-01-01

    The main task of the Target Tracker detector of the long baseline neutrino oscillation OPERA experiment is to locate in which of the target elementary constituents, the lead/emulsion bricks, the neutrino interactions have occurred and also to give calorimetric information about each event. The technology used consists in walls of two planes of plastic scintillator strips, one per transverse direction. Wavelength shifting fibres collect the light signal emitted by the scintillator strips and guide it to both ends where it is read by multi-anode photomultiplier tubes. All the elements used in the construction of this detector and its main characteristics are described.

  3. Characterization of surface defects in high strength galvannealed steels; Charakterisierung der Oberflaechendefekte in hochfesten, nach dem Verzinken waermebehandelten Staehlen

    Energy Technology Data Exchange (ETDEWEB)

    Hong, M.H. [Automotive Steels Research Center, Technical Research Labs., POSCO, Gwangyang (Korea)

    2004-03-01

    Hot-dip galvannealed steel sheets, in which Fe of the substrate steel diffused into upper coating layer so as to be alloyed with Zn through a galvannealing above 450 C followed by hot-dip galvanizing process, generally show superior corrosion resistance, weldability and paintability. They have been widely used in automobile, construction, appliance industries and others. In particular, many researches have been carrying out to produce defect-free coating for an exposed automotive body panel. In the present study, high strength interstitial-free steel sheets containing Mn and P were galvannealed in an industrial continuous galvanizing line and defects on the coating surface were investigated by optical microscopy, scanning electron microscopy and transmission electron microscopy. It is clear that the quality of the substrate strongly affects galvannealed coating and it is essential to keep clean surface just before immediately dipping into molten Zn pot. (orig.) [German] Feuerverzinkte und danach waermebehandelte Stahlbleche, wo Fe aus dem Substratstahl in die obere Beschichtungsschicht diffundiert wie bei Legieren mit Zn und einer Waermebehandlung von ueber 450 C, gefolgt von einem Feuerverzinkverfahren, zeigen im Allgemeinen hervorragende Korrosionsbestaendigkeit, Schweissbarkeit und Anstreichbarkeit. Sie finden ein breites Einsatzgebiet bei Automobilen, im Bauwesen, in Werkzeugindustrien und anderen. Insbesondere wurde von vielen Forschern versucht, eine fehlerfreie Beschichtung fuer ein ungeschuetztes Karosserieteil herzustellen. In der vorliegenden Arbeit wurden hochfeste porenfreie Stahlbleche mit Mn- und P-Gehalt nach dem Verzinken in einer industriellen Endlos-Verzinkungslinie (CGL) waermebehandelt, wobei die Defekte auf der Schichtoberflaeche lichtmikroskopisch, rasterund transmissionselektronenmikroskopisch untersucht wurden. Klar ist, dass die Qualitaet des Substrats die nach dem Verzinken waermebehandelten Schichten beeinflusst und es ist von grosser

  4. Steueroptimierte Alters- und Berufsunfähigkeitsvorsorge nach dem Alterseinkünftegesetz

    OpenAIRE

    Eberhardt, Michael G.

    2007-01-01

    Eine höhere Lebenserwartung bei gleichzeitiger Überalterung der deutschen Gesellschaft sind maßgebliche Gründe eines heute bereits festzustellenden Defizits der gesetzlichen Rentenversicherung. Die jüngste Rentenreform mit dem Altersvermögens- und Alterseinkünftegesetz setzte deshalb maßgebliche Anreize, die Alterssicherung eigenverantwortlich um eine private, staatlich geförderte Vorsorge zu ergänzen. Jedoch mangelt es derzeit vorwiegend an einer fachkundigen Informations- und Beratungsleist...

  5. Was kommt nach dem Handel? Umnutzung von Einzelhandelsflächen und deren Beitrag zur Stadtentwicklung

    OpenAIRE

    Sperle, Tilman

    2012-01-01

    In der Stadt europäischen Typs sind Stadt und Handel eng miteinander verwoben. Die Bedeutung des Handels geht weit über dessen originäre Versorgungsfunktion hinaus. Für die städtischen Zentren und Nebenzentren übernimmt er sowohl gestaltende als auch soziale Funktionen und trägt mit seiner belebenden Wirkung maßgeblich zum urbanen Leben bei. Mit dem tief greifenden Strukturwandel im Einzelhandel verändert sich diese Beziehung zwischen Stadt und Handel dramatisch, Trading-down-Prozesse geh...

  6. Die Struktur der Handgesten im indischen Tanz nach dem „Nāṭya-Śāstra“ des Bharata (NŚBh)

    OpenAIRE

    Müller, Biliana

    2008-01-01

    In der vorliegenden Untersuchung wird eine Strukturanalyse der Gestensprache im indischen Tanz nach einem schriftlich vorliegenden Text vorgeschlagen – dem neunten Kapitel des ‚Nāṭya-Śāstra‘ eines legendären Autors namens Bharata. Der untersuchte Text ist Zeugnis für ein Zeichensystem, das über mehr als zwei Jahrtausende als Basis für die symbolische Interaktion auf dem indischen Subkontinent gedient hat und heute in zahlreichen Variationen präsent ist. Dieses Zeichensystem ist im semiotische...

  7. Recent results from the OPERA experiment

    CERN Document Server

    del Amo Sanchez, P

    2013-01-01

    The OPERA neutrino experiment recently nished data-taking, its recorded sample compris- ing 18 : 0 10 19 POT delivered by the CERN CNGS beam from 2008 to 2012. The goal of the OPERA experiment is to establish ! oscillations in appearance mode by observing the leptons produced in Charged Current interactions. Here we report on the status of the data analysis, and describe, in particular, two ! candidate events. Results on ! e oscillations are also presented.

  8. Mechanical-biological waste conditioning with controlled venting - the Meisenheim mechanical-biological waste conditioning plant; Mechanisch-biologische Restabfallbehandlung nach dem Kaminzugverfahren - MBRA Meisenheim

    Energy Technology Data Exchange (ETDEWEB)

    Hangen, H.O. [Abfallwirtschaftsbetrieb Landkreis Bad Kreuznach, Bad Kreuznach (Germany)

    1998-12-31

    The decision of the rural district of Bad Kreuznach to propose creating facilities for mechanical-biological waste conditioning at the new northern Meisenheim landfill was consistent and correct. It will ensure that the material deposited at this new, state-of-the-art landfill is organically `lean` and can be deposited with a high density. Preliminary sifting of the material prior to depositing safeguards that no improper components are inadvertently included. Three years of operation warrant the statement that waste components that cannot be appropriately biologically conditioned should be eliminated prior to rotting. (orig.) [Deutsch] Die Entscheidung des Landkreises Bad Kreuznach, der neu eingerichteten Norddeponie Meisenheim eine MBRA vorzuschlaten, war auf jeden Fall konsequent und richtig. Es ist damit sicher gestellt, dass in diesem neuen nach dem Stand der Technik eingerichteten Deponiebereich von Anfang an ein Material eingelagert wird, das `organisch abgemagert` ist und mit hoher Einbaudichte eingebaut werden kann. Die Sichtung des gesamten Deponie-Inputs in der Vorsortierhalle gibt ein Stueck Sicherheit, dass keine nicht zugelassenen Stoffe verdeckt dem Ablagerungsbereich der Deponie zugefuehrt werden. Nach mehr als 3 Jahren Betriebszeit kann festgestellt werden, dass biologisch nicht sinnvoll behandelbare Abfallbestandteile vor dem Rotteprozess abgetrennt werden sollten. (orig.)

  9. Massenmedien und Versöhnung: Die Berichterstattung über den deutsch-französischen Friedensprozeß nach dem 2. Weltkrieg

    Directory of Open Access Journals (Sweden)

    Susanne Jaeger

    2003-10-01

    Full Text Available Der vorliegende Beitrag beinhaltet die ersten Ergebnisse einer Langzeitstudie, bei der flächendeckend die deutsche Nachkriegsberichterstattung über Frankreich von 1946 bis 1970 inhaltsanalytisch ausgewertet wurde. Die Studie stützt sich dabei auf das Modell der Nachrichtenfaktoren von Johan Galtung, welche nach seiner Ansicht die Auswahl der Themen bestimmen, die zu einer Nachricht werden. Genau in diesen Selektionsroutinen liegt jedoch die implizite Gefahr, Konflikte zu vertiefen statt sie einzudämmen bzw. durch ein breites Verständnis der Hintergründe gewaltfrei bearbeitbar zu machen. Für die Zeit nach einem Krieg könnten sie Hindernisse auf dem Weg zur Annäherung und Aussöhnung ehemaliger Gegner darstellen. Wie jedoch sieht die Berichterstattung nach dem Krieg tatsächlich aus? Zeigen Massenmedien Bereitschaft zu einer veränderten Berichterstattung? Der Fall der französisch-deutschen Aussöhnung, welcher als Beispiel für einen gelungenen Aussöhnungsprozess gelten kann, belegt, dass Friedensprozesse von den Medien durchaus adäquat begleitet werden können: Z.B. ist der Anteil "positiver" Themen bzw. Berichterstattung konsistent höher als der "negativer", und der Anteil von Non-Elite-Themen steigt an und kündet von Interesse an französischer Lebensart und Kultur. Die Ergebnisse zeigen, dass Negativismus in den Medien kein Naturgesetz ist, sondern überwunden werden kann, wenn Frieden und Versöhnung auf der Tagesordnung stehen.

  10. Ranking of CT in persistent vertigo after implantation of stapes prostheses; Stellenwert der Computertomographie bei persistierenden Gleichgewichtsstoerungen nach dem Einsatz von Stapesplastiken

    Energy Technology Data Exchange (ETDEWEB)

    Koesling, S. [Leipzig Univ. (Germany). Klinik fuer Diagnostische Radiologie; Woldag, K. [Leipzig Univ. (Germany). Klinik und Poliklinik fuer Hals-Nasen-Ohren-Krankheiten; Meister, E.F. [Leipzig Univ. (Germany). Klinik und Poliklinik fuer Hals-Nasen-Ohren-Krankheiten; Reschke, I. [Leipzig Univ. (Germany). Klinik fuer Diagnostische Radiologie; Schulz, H.G. [Leipzig Univ. (Germany). Klinik fuer Diagnostische Radiologie

    1995-01-01

    10 of 150 patients had persistent vertigo after implanation of stapes prostheses. These patients were evaluated by high resolution CT in the axial and coronal plane. Scans showed in all cases findings which related to the symptoms. The CT findings were proved intraoperatively in 9 cases. A new indirect sign of a perilymphatic fistula is described in form of an air bulla at the end of the prosthesis. Retympanotomy could be planned better with the help of HR-CT. (orig.) [Deutsch] Von 150 Patienten zeigten 10 nach dem Einsatz einer Stapesprothese eine persistierende vestibulaere Symptomatik. Mittels der hochaufloesenden Felsenbein-CT in axialer und koronarer Schnittfuehrung konnten in allen Faellen in Symptomatik erklaerende Befunde erhoben werden. Eine operative Bestaetigung erfolgte in 9 Faellen. Als bisher in der Literatur in diesem Zusammenhang nicht beschriebenes, indirektes Zeichen einer Perilymphfistel wurde eine kleine Luftblase am Prothesenende nachgewiesen. Die HR-CT hat sich als wesentliche Erleichterung bei der Planung einer Retympanotomie erwiesen. (orig.)

  11. Kardiovaskuläres Risikofaktorenprofil und Herzinfarktrisiko nach dem PROCAM-Index bei Männern mittleren Alters unter besonderer Berücksichtigung der EKG-Veränderungen unter Belastungsbedingungen

    OpenAIRE

    Kirchhof, M.R. (Monika)

    2006-01-01

    An 1248 Soldaten, wurde das kardiovaskuläre Risikofaktorenprofil bestimmt und das Herzinfarktrisiko nach dem PROCAM-Index ermittelt. Häufigkeit der Risikofaktoren: BMI?25kg/m2: 68,8%, positive Familienanamnese für Herzinfarkt 13,4%, Zigarettenrauchen 17,9%, körperliche Inaktivität 4,9%, systolischer RR?140mmHg: 50,9%, diastolischer RR?90mmHg: 41,4%, Gesamtcholesterin?5,2 mmol/l: 59,7%, HDL-Cholesterin?1,2 mmol/l: 33,5%, Gesamtcholesterin/HDL-Cholesterin-Quotient?4: 52,3%, LDL-Cholesterin ?4,...

  12. Die Jagd nach dem Allerkleinsten

    CERN Multimedia

    Wolter, Uwe

    2006-01-01

    Only with probes and telescopes scientists do not explore the universe. To understand the processes in the cosmos, researchers feign Big Bang in gigantic devices and look with extremely sensitive detectors for the most elementary particles (1 page)

  13. Emulsion sheet doublets as interface trackers for the OPERA experiment

    CERN Document Server

    Anokhina, A.; Ariga, A.; Arrabito, L.; Autiero, D.; Badertscher, A.; Bay, F.; Greggio, F.Bersani; Bertolin, A.; Besnier, M.; Bick, D.; Bozza, C.; Brugiere, T.; Brugnera, R.; Brunetti, G.; Buontempo, S.; Carrara, E.; Cazes, A.; Chaussard, L.; Chernyavsky, M.; Chiarella, V.; Chon-Sen, N.; Chukanov, A.; Consiglio, L.; Cozzi, M.; Cuha, V.; Dal Corso, F.; D'Amato, G.; D'Ambrosio, N.; De Lellis, G.; Declais, Y.; De Serio, M.; Di Capua, F.; Di Ferdinando, D.; Di Giovanni, A.; Di Marco, N.; Di Troia, C.; Dmitrievski, S.; Dominjon, A.; Dracos, Marcos; Duchesneau, D.; Dusini, S.; Ebert, J.; Egorov, O.; Enikeev, R.; Ereditato, Antonio; Esposito, L.S.; Favier, J.; Felici, G.; Ferber, T.; Fini, R.; Frekers, D.; Fukuda, T.; Galkin, V.I.; Galkin, V.A.; Garfagnini, A.; Giacomelli, G.; Giorgini, M.; Goellnitz, C.; Goldberg, J.; Golubkov, D.; Gornushkin, Y.; Grella, G.; Grianti, F.; Guler, M.; Gusev, G.; Gustavino, C.; Hagner, Caren; Hara, T.; Hierholzer, M.; Hiramatsu, S.; Hoshino, Kaoru; Ieva, M.; Jakovcic, K.; Janicsko Csathy, J.; Janutta, B.; Jollet, C.; Juget, F.; Kawai, T.; Kazuyama, M.; Kim, S.H.; Knuesel, J.; Kodama, K.; Komatsu, M.; Kose, U.; Kreslo, I.; Laktineh, I.; Lazzaro, C.; Lenkeit, J.; Ljubicic, A.; Longhin, Andrea; Lutter, G.; Manai, K.; Mandrioli, G.; Marotta, A.; Marteau, J.; Matsuo, T.; Matsuoka, H.; Mauri, N.; Meisel, F.; Meregaglia, A.; Messina, M.; Migliozzi, P.; Mikado, S.; Miyamoto, S.; Monacelli, Piero; Morishima, Kunihiro; Moser, U.; Muciaccia, Maria Teresa; Naganawa, N.; Naka, T.; Nakamura, M.; Nakamura, T.; Nakano, T.; Nikitina, V.; Niwa, K.; Nonoyama, Y.; Ogawa, S.; Osedlo, V.; Ossetski, D.; Paoloni, A.; Park, B.D.; Park, I.G.; Pastore, A.; Patrizii, L.; Pennacchio, E.; Pessard, H.; Pilipenko, V.; Pistillo, C.; Polukhina, N.; Pozzato, M.; Pretzl, Klaus P.; Publichenko, P.; Pupilli, F.; Roganova, T.; Rosa, G.; Rostovtseva, I.; Rubbia, A.; Russo, A.; Ryazhskaya, O.; Ryzhikov, D.; Sato, O.; Sato, Y.; Saveliev, V.; Sazhina, G.; Schembri, A.; Scotto Lavina, L.; Shibuya, H.; Simone, S.; Sioli, Max; Sirignano, C.; Sirri, G.; Song, J.S.; Spinetti, M.; Stanco, L.; Starkov, N.; Stipcevic, M.; Strauss, T.; Strolin, Paolo Emilio; Sugonyaev, V.; Taira, Y.; Takahashi, S.; Tenti, M.; Terranova, F.; Tezuka, I.; Tioukov, V.; Tolun, P.; Tsarev, V.; Tufanli, S.; Ushida, N.; Vilain, P.; Vladimirov, M.; Votano, L.; Vuilleumier, J.L.; Wilquet, G.; Wonsak, B.; Wurtz, J.; Yoon, C.S.; Yoshida, J.; Zaitsev, Y.; Zemskova, S.; Zghiche, Amina; Zimmermann, R.

    2008-01-01

    New methods for efficient and unambiguous interconnection between electronic counters and target units based on nuclear photographic emulsion films have been developed. The application to the OPERA experiment, that aims at detecting oscillations between mu neutrino and tau neutrino in the CNGS neutrino beam, is reported in this paper. In order to reduce background due to latent tracks collected before installation in the detector, on-site large-scale treatments of the emulsions ("refreshing") have been applied. Changeable Sheet (CSd) packages, each made of a doublet of emulsion films, have been designed, assembled and coupled to the OPERA target units ("ECC bricks"). A device has been built to print X-ray spots for accurate interconnection both within the CSd and between the CSd and the related ECC brick. Sample emulsion films have been extensively scanned with state-of-the-art automated optical microscopes. Efficient track-matching and powerful background rejection have been achieved in tests with electronic...

  14. Status and oscillation results of the OPERA experiment

    International Nuclear Information System (INIS)

    Brunet, F.

    2014-01-01

    The OPERA experiment, placed 730 km downstream the CERN neutrino beam to Gran Sasso (CNGS) in the LNGS underground laboratory, is designed to measure muon-neutrino to tau-neutrino oscillations in a direct appearance mode. The hybrid apparatus consists of an emulsion/lead target complemented by electronic detectors. Due to the target structure made of thin lead plates, OPERA is able to detect electromagnetic showers, allowing searches for tau electronic decays and for oscillations from muon-neutrino to electron-neutrino. The experimental set-up and associated facilities used to extract data recorded in the emulsion will be described, with the special procedures aimed at locating interaction vertices and detect short decay topologies. OPERA is taking data since 2008. A first nu-tau interaction candidate was already published in 2010. New results with increased statistics will be presented. In particular, an overview of the studies related to electrons will be shown. (author)

  15. Particle identification by nuclear emulsions in the OPERA experiment

    International Nuclear Information System (INIS)

    Manai, Kais

    2007-01-01

    The OPERA experiment will try to confirm the ν μ →ν τ oscillations by the appearance of the ν τ in a pure ν μ beam. Indeed, a neutrino beam almost pure is produced at CERN (CNGS Beam) and sent to the OPERA detector. The detector is composed of two muons spectrometers and a target formed by walls of bricks. Each brick is an alternation of lead plates and emulsions. This modular structure allows to reconstruct the kink topology of the τ lepton decay with a high spatial resolution. The great challenge of the OPERA experiment is to detect the ν τ interactions with the less uncertainty. To reduce this uncertainty it is essential to identify with the greatest efficiency any background event not including a tau particle. My work permits to reduce background. My principal contribution concerns the selection development, the reconstruction and the muons identification at low energy. This work is based on the setting of variables related to the deposit energy and the multiple scattering. Previously, only deposit energy was used in the analyses of pion/muon separation. This study allows doubling the muon identification efficiency at low energy. This leads to increase the background events rejection in OPERA and to decrease the contamination by 30 pour cent. I also studied the nuclear emulsions capacity to identify charged particles through the analysis of a test beam carried out by the Nagoya group. This test contains protons and pions with different energies. My work proves that the European scan system gives comparable results with those obtained by the Japanese scan system. (Author)

  16. Emulsion sheet doublets as interface trackers for the OPERA experiment

    International Nuclear Information System (INIS)

    Anokhina, A; Aoki, S; Ariga, A; Arrabito, L; Autiero, D; Brugiere, T; Chaussard, L; Badertscher, A; Bay, F; Greggio, F Bersani; Bertolin, A; Besnier, M; Bick, D; Bozza, C; Brugnera, R; Carrara, E; Brunetti, G; Buontempo, S; Cazes, A; Chernyavsky, M

    2008-01-01

    New methods for efficient and unambiguous interconnection between electronic position sensitive detectors and target units based on nuclear photographic emulsion films have been developed. The application to the OPERA experiment, that aims at detecting ν μ ν τ oscillations in the CNGS neutrino beam, is reported in this paper. In order to reduce background due to latent tracks collected before installation in the detector, on-site large-scale treatments of the emulsions (''refreshing'') have been applied. Changeable Sheet (CSd) packages, each made of a doublet of emulsion films, have been designed, assembled and coupled to the OPERA target units (''ECC bricks''). A device has been built to print X-ray spots for accurate interconnection both within the CSd and between the CSd and the related ECC brick. Sample emulsion films have been extensively scanned with state-of-the-art automated optical microscopes. Efficient track-matching and powerful background rejection have been achieved in tests with electronically tagged penetrating muons. Further improvement of in-doublet film alignment was obtained by matching the pattern of low-energy electron tracks. The commissioning of the overall OPERA alignment procedure is in progress

  17. arXiv Final results of the OPERA experiment on $\

    CERN Document Server

    Agafonova, N.; Anokhina, A.; Aoki, S.; Ariga, A.; Ariga, T.; Bertolin, A.; Bozza, C.; Brugnera, R.; Buonaura, A.; Buontempo, S.; Chernyavskiy, M.; Chukanov, A.; Consiglio, L.; D'Ambrosio, N.; De Lellis, G.; De Serio, M.; del Amo Sanchez, P.; Di Crescenzo, A.; Di Ferdinando, D.; Di Marco, N.; Dmitrievsky, S.; Dracos, M.; Duchesneau, D.; Dusini, S.; Dzhatdoev, T.; Ebert, J.; Ereditato, A.; Favier, J.; Fini, R.A.; Fornari, F.; Fukuda, T.; Galati, G.; Garfagnini, A.; Gentile, V.; Goldberg, J.; Gornushkin, Y.; Gorbunov, S.; Grella, G.; Guler, A.M.; Gustavino, C.; Hagner, C.; Hara, T.; Hayakawa, T.; Hollnagel, A.; Ishiguro, K.; Iuliano, A.; Jakovcic, K.; Jollet, C.; Kamiscioglu, C.; Kamiscioglu, M.; Kim, S.H.; Kitagawa, N.; Klicek, B.; Kodama, K.; Komatsu, M.; Kose, U.; Kreslo, I.; Laudisio, F.; Lauria, A.; Ljubicic, A.; Longhin, A.; Loverre, P.; Malgin, A.; Malenica, M.; Mandrioli, G.; Matsuo, T.; Matveev, V.; Mauri, N.; Medinaceli, E.; Meregaglia, A.; Mikado, S.; Miyanishi, M.; Mizutani, F.; Monacelli, P.; Montesi, M.C.; Morishima, K.; Muciaccia, M.T.; Naganawa, N.; Naka, T.; Nakamura, M.; Nakano, T.; Niwa, K.; Okateva, N.; Olchevsky, A.; Ogawa, S.; Ozaki, K.; Paoloni, A.; Paparella, L.; Park, B.D.; Pasqualini, L.; Pastore, A.; Patrizii, L.; Pessard, H.; Pistillo, C.; Podgrudkov, D.; Polukhina, N.; Pozzato, M.; Pupilli, F.; Roda, M.; Roganova, T.; Rokujo, H.; Rosa, G.; Ryazhskaya, O.; Sadovsky, A.; Sato, O.; Schembri, A.; Shakiryanova, I.; Shchedrina, T.; Shibuya, H.; Shibayama, E.; Shiraishi, T.; Simone, S.; Sirignano, C.; Sirri, G.; Sotnikov, A.; Spinetti, M.; Stanco, L.; Starkov, N.; Stellacci, S.M.; Stipcevic, M.; Strolin, P.; Takahashi, S.; Tenti, M.; Terranova, F.; Tioukov, V.; Tufanli, S.; Ustyuzhanin, A.; Vasina, S.; Vilain, P.; Voevodina, E.; Votano, L.; Vuilleumier, J.L.; Wilquet, G.; Wonsak, B.; Yoon, C.S.

    2018-05-23

    The OPERA experiment was designed to study νμ→ντ oscillations in the appearance mode in the CERN to Gran Sasso Neutrino beam (CNGS). In this Letter, we report the final analysis of the full data sample collected between 2008 and 2012, corresponding to 17.97×1019 protons on target. Selection criteria looser than in previous analyses have produced ten ντ candidate events, thus reducing the statistical uncertainty in the measurement of the oscillation parameters and of ντ properties. A multivariate approach for event identification has been applied to the candidate events and the discovery of ντ appearance is confirmed with an improved significance level of 6.1σ. |Δm322| has been measured, in appearance mode, with an accuracy of 20%. The measurement of the ντ charged-current cross section, for the first time with a negligible contamination from ν¯τ, and the first direct evidence for the ντ lepton number are also reported.

  18. Waste treatment by the CCP/EuRec {sup trademark} process; Abfallbehandlung nach dem CCP/EuRec {sup trademark} -Restabfallbehandlungsverfahren

    Energy Technology Data Exchange (ETDEWEB)

    Lippmann, A. [CCP GmbH, Waste Management, Merkers (Germany)

    2002-07-01

    The CCP/EuRec {sup trademark} process involves either an aerobic (composting) or an anaerobic (fermentation) biological treatment stage, or a combination of both. [German] Bei dem CCP/EuRec {sup trademark} -Restabfallbehandlungsverfahren handelt es sich um ein leistungsfaehiges System zur biologischen Behandlung von Restabfaellen. Die biologische Behandlungsstufe kann wahlweise aerob (Rotte) oder anaerob (Vergaerung) erfolgen. Eine Kombination zwischen beiden Varianten ist ebenfalls moeglich. (orig.)

  19. Polilingvizmas kaip „grįžimas namõ“: tarp Babilono katastrofos ir Jeruzalės Sekminių stebuklo. Vlado Braziūno poezijos at(sivėrimai | Der Polylinguismus als „Rückkehr nach Hause“: zwischen der babylonischen Katastrophe und dem Pfingstwunder von Jerusalem

    Directory of Open Access Journals (Sweden)

    Skirmantas Valentas

    2006-01-01

    Full Text Available In diesem Beitrag wird ein Versuch unternommen, die Widerspiegelung von zwei philologisch wichtigen Episoden der Heiligen Schrift in der modernen Poesie zu vermitteln. Es geht um die Erzählung von der babylonischen Sprachenverwirrung im Buch der Anfänge und um das in den Apostelgeschichten erwähnte Pfingstwunder, die beide unter einen Begriff Polylinguismus fallen.Der Polylinguismus in der Poesie ist als eine syntagmatische Mehrsprachigkeit, anders gesagt, als eine implizite Benennung desgleichen Denotats in einigen Sprachen, zu betrachten.Der verallgemeinernde Begriff „Rückkehr nach Hause“ lässt zwei Begriffe in Verbindung setzen: die sich nach der babylonischen Katastrophe etablierte Mehrsprachigkeit und das Pfingstwunder als eine Möglichkeit die verwirrten Sprachen wieder zu einem Harmonischen zusammenzufügen.Da die Poesie als ein Grammatik modellierender Text vorliegt, ist eine Idee hervorzuheben, dass neben einer üblichen Sprache in der Poesie eine andere Sprache mit völlig anderen Regeln aufgedeckt werden muss.Als eines der Grundmerkmale der üblichen Sprache ist ein in ihr enthaltenes Oppositionsystem zu betrachten. Als Grundmerkmal einer anderen Sprache gilt dagegen das Schwinden der grundlegenden Oppositionen, das einen endlosen und periodischen Text schafft.Der Polylinguismus der Poesie wird in den linguistischen Geschichten am deutlichsten sichtbar. Der Polylinguismus in der Poesie, der dem Simultandolmetschen nahsteht, führt uns auf das Pfingstwunder zurück.

  20. Neutrino velocity measurement with the OPERA experiment in the CNGS beam

    International Nuclear Information System (INIS)

    Brunetti, G.

    2011-05-01

    The thesis concerns the measurement of the neutrino velocity with the OPERA experiment in the CNGS beam. There are different theoretical models that allow for Lorentz violating effects which can be investigated with measurements on terrestrial neutrino beams. The MINOS experiment published in 2007 a measure on the muon neutrinos over a distance of 730 km finding a deviation with respect to the expected time of flight of 126 ns with a statistical error of 32 ns and a systematic error of 64 ns. The OPERA experiment observes as well muon neutrinos 730 km away from the source, with a sensitivity significantly better than MINOS thanks to the higher number of interactions in the detector due to the higher energy beam and the much more sophisticated timing system explicitly upgraded in view of the neutrino velocity measurement. This system is composed by atomic cesium clocks and GPS receivers operating in 'common view mode'. Thanks to this system a time-transfer between the two sites with a precision at the level of 1 ns is possible. Moreover, a Fast Waveform Digitizer was installed along the proton beam line at CERN in order to measure the internal time structure of the proton pulses that are sent to the CNGS target. The result on the neutrino velocity is the most precise measurement so far with terrestrial neutrino beams: the neutrino time of flight was determined with a statistical uncertainty of about 10 ns and a systematic uncertainty smaller than 20 nano-seconds. (author)

  1. Event classification with the electronic detectors of the OPERA experiment using neural networks

    International Nuclear Information System (INIS)

    Hierholzer, Martin C.

    2012-02-01

    The OPERA experiment searches for ν μ ν τ oscillations in appearance mode. It uses the emulsion cloud chamber (ECC) technique for a high spatial resolution combined with on-line components for event localisation and muon identification. The analysis of events in an ECC detector takes considerable time, especially in case of ν τ /ν e candidate events. A ranking of events by a probability for being a ν τ /ν e event can speed up the analysis of the OPERA experiment. An algorithm for such an event ranking based on a classification-type neural network is presented in this thesis. Almost all candidate events can be found within the first 30% of the analysed events if the described ranking is applied. This event ranking is currently applied for testing purposes by the OPERA collaboration, a decision on a full application for the whole analysis is pending. A similar neural network is used for discrimination between neutral and charged current events. This is used to observe neutrino oscillations in disappearance mode with the on-line components of the OPERA detector by measuring the energy dependence of the fraction of neutral current interactions. The confidence level of the observed oscillation effect is 87%. Assuming full mixing, the mass splitting has been determined to vertical stroke Δm 2 32 vertical stroke =2.8 -1.7 +1.4 .10 -3 eV 2 .

  2. Track reconstruction in the emulsion-lead target of the OPERA experiment using the ESS microscope

    Science.gov (United States)

    Arrabito, L.; Bozza, C.; Buontempo, S.; Consiglio, L.; Cozzi, M.; D'Ambrosio, N.; DeLellis, G.; DeSerio, M.; Di Capua, F.; Di Ferdinando, D.; Di Marco, N.; Ereditato, A.; Esposito, L. S.; Fini, R. A.; Giacomelli, G.; Giorgini, M.; Grella, G.; Ieva, M.; Janicsko Csathy, J.; Juget, F.; Kreslo, I.; Laktineh, I.; Manai, K.; Mandrioli, G.; Marotta, A.; Migliozzi, P.; Monacelli, P.; Moser, U.; Muciaccia, M. T.; Pastore, A.; Patrizii, L.; Petukhov, Y.; Pistillo, C.; Pozzato, M.; Romano, G.; Rosa, G.; Russo, A.; Savvinov, N.; Schembri, A.; Scotto Lavina, L.; Simone, S.; Sioli, M.; Sirignano, C.; Sirri, G.; Strolin, P.; Tioukov, V.; Waelchli, T.

    2007-05-01

    The OPERA experiment, designed to conclusively prove the existence of νμ→ντ oscillations in the atmospheric sector, makes use of a massive lead-nuclear emulsion target to observe the appearance of ντ's in the CNGS νμ beam. The location and analysis of the neutrino interactions in quasi real-time required the development of fast computer-controlled microscopes able to reconstruct particle tracks with sub-micron precision and high efficiency at a speed of ~20 cm2/h. This paper describes the performance in particle track reconstruction of the European Scanning System, a novel automatic microscope for the measurement of emulsion films developed for OPERA.

  3. Track reconstruction in the emulsion-lead target of the OPERA experiment using the ESS microscope

    International Nuclear Information System (INIS)

    Arrabito, L; Bozza, C; Buontempo, S

    2007-01-01

    The OPERA experiment, designed to conclusively prove the existence of ν μ →ν τ oscillations in the atmospheric sector, makes use of a massive lead-nuclear emulsion target to observe the appearance of ν τ 's in the CNGS ν μ beam. The location and analysis of the neutrino interactions in quasi real-time required the development of fast computer-controlled microscopes able to reconstruct particle tracks with sub-micron precision and high efficiency at a speed of ∼20 cm 2 /h. This paper describes the performance in particle track reconstruction of the European Scanning System, a novel automatic microscope for the measurement of emulsion films developed for OPERA

  4. Kinematical analysis with the Emulsion Cloud Chamber in the OPERA experiment

    CERN Document Server

    Di Capua, F

    2010-01-01

    The OPERA experiment aims at measuring for the first time neutrino oscil- lation in appearance mode through the detection of ni-tau in an almost pure niμ beam produced at CERN SPS (CNGS), 730 km far from the detector. The ni-tau appearance signal is identified through the measurement of the decay daughter particles of the " lepton produced in CC ni-tau interactions. Since the short-lived " particle has, at the energy of the beam, an average decay length shorter than a 1 mm, a micrometric detection resolution is needed. The OPERA appara- tus is hybrid, using nuclear emulsion as high precision tracker and electronic detectors for the time stamp, event localization in the target and muon recon- struction. The Emulsion Cloud Chamber technique fulfils the requirement of a microscopic resolution together with a large target mass. The kinematical analysis allowed by this technique is described.

  5. Event classification with the electronic detectors of the OPERA experiment using neural networks

    Energy Technology Data Exchange (ETDEWEB)

    Hierholzer, Martin C.

    2012-02-15

    The OPERA experiment searches for {nu}{sub {mu}} <-> {nu}{sub {tau}} oscillations in appearance mode. It uses the emulsion cloud chamber (ECC) technique for a high spatial resolution combined with on-line components for event localisation and muon identification. The analysis of events in an ECC detector takes considerable time, especially in case of {nu}{sub {tau}}/{nu}{sub e} candidate events. A ranking of events by a probability for being a {nu}{sub {tau}}/{nu}{sub e} event can speed up the analysis of the OPERA experiment. An algorithm for such an event ranking based on a classification-type neural network is presented in this thesis. Almost all candidate events can be found within the first 30% of the analysed events if the described ranking is applied. This event ranking is currently applied for testing purposes by the OPERA collaboration, a decision on a full application for the whole analysis is pending. A similar neural network is used for discrimination between neutral and charged current events. This is used to observe neutrino oscillations in disappearance mode with the on-line components of the OPERA detector by measuring the energy dependence of the fraction of neutral current interactions. The confidence level of the observed oscillation effect is 87%. Assuming full mixing, the mass splitting has been determined to vertical stroke {delta}m{sup 2}{sub 32} vertical stroke =2.8{sub -1.7}{sup +1.4}.10{sup -3}eV{sup 2}.

  6. Investigations on pretreatment of waste prior to fermentation by percolation using the ISKA {sup registered} process; Untersuchungen zur Vorbehandlung von Abfaellen vor der Vergaerung mittels Perkolation nach dem ISKA {sup registered} -Verfahren

    Energy Technology Data Exchange (ETDEWEB)

    Santen, H. [Technische Univ. Braunschweig (Germany). FG Abfallwirtschaft; Fricke, K. [Technische Univ. Braunschweig (Germany). Lehrstuhl Abfallwirtschaft; Engelhard, T.; Widmer, C. [ISKA GmbH, Ettlingen (Germany)

    2004-07-01

    Waste treatment prior to fermentation is a key aspect in achieving economic efficiency. One process is presented here in particular: percolation, in which waste is hydrolyzed aerobically, treated mechanically, and washed out with the aid of process water. The process involves a percolation stage followed by a fermentation stage. The process water burdened with organic matter is passed into a fermentation reactor in which the organic components are reacted anaerobically into biogas and bacterial mass, and the process water is recirculated into the percolation reactor. (orig.) [German] Vergaerungstechnologien zaehlen zu den etablierten Verfahren zur Gewinnung regenerativer Energien aus Biomasse. Fuer die Energieeffizienz dieser Verfahren sind die Leistung der Vergaerungsstufe, die Hoehe der Verfuegbarkeit der anaerob abzubauenden organischen Substanzen und der spezifische Energiebedarf des Behandlungsverfahrens massgeblich. Eine Schluesselstellung fuer die Optimierung beider Faktoren nimmt die Abfallaufbereitung vor der Vergaerung ein. Eine Technoloie zur Aufbereitung vor der Vergaerung basiert auf dem Verfahren der Perkolation, in der der Abfall aerob hydrolysiert,mechanisch aufgeschlossen und durch Zugabe von Prozesswasser ausgewaschen wird. Das Verfahren besteht aus einer Aufbereitung - der Perkolation - sowie einer nachgeschalteten Vergaerung. Das mit vergaerbarer Organik beladene Prozesswasser wird einem Vergaerungsreaktor zugefuehrt, in dem die organischen Komponenten anaerob zu Biogas und Bakterienmasse umgesetzt werden. Das aufbereitete Prozesswasser wird anschliessend wieder dem Perkolationsreaktor zugefuehrt. (orig.)

  7. A new subsidy regulation for coal after 2002 on the basis of the EC treaty; Eine neue Beihilferegelung fuer die Steinkohle nach dem Jahr 2002 auf der Basis des EG-Vertrags

    Energy Technology Data Exchange (ETDEWEB)

    Reichel, W. [Gesamtverband des Deutschen Steinkohlenbergbaus, Essen (Germany)

    2000-08-10

    Coal is and will remain the most important indigenous energy resource in Europe. Hence, an appropriate ECSC regulation must be drawn up for coal subsidies in the EC Treaty after 2002 to enable a core mining industry based on the long-term safeguarding of supply. This is primarily not a legal, but a political question. Neither Kyoto nor the expansion of natural gas or image problems militate against coal. Its future contribution to the energy mix requires above all advances in technology. (orig.) [German] Die Kohle ist und bleibt die wichtigste heimische Energieressource Europas. Fuer die Kohlenbeihilfen muss daher ab dem Jahr 2002 eine adaequate EGKS-Nachfolgeregelung im Rahmen des EG-Vertrags getroffen werden, um einen mit der langfristigen Versorgungssicherung begruendeten Kernbergbau zu ermoeglichen. Dies ist primaer keine rechtliche, sondern eine politische Frage. Weder Kyoto noch die Erdgasexpansion oder Imageprobleme sprechen grundsaetzlich gegen die Kohle. Ihr zukuenftiger Beitrag zum Energiemix erfordert vor allem eine Technikoffensive. (orig.)

  8. Development and determination of the efficiency of the myon detector for the OPERA experiment

    International Nuclear Information System (INIS)

    Sewing, J.

    2006-09-01

    The OPERA experiment is situated in the Gran Sasso underground laboratory. It will search for neutrino oscillation from myonneutrinos to tauneutrinos with a massive lead/emulsion target. Part of the OPERA detector is the precision tracker. This precision tracker consists of about 10000 drift tubes of 8 m length. Its purpose is to measure the muon track in the spectrometer of the OPERA detector to determine their momentum and charge. This work studies the basic properties of the precision tracker, such as the dependency of the resolution and the efficiency of the drift tubes and various parameters. These parameters are among others the high voltage and the threshold of the discriminators. The results of these studies led to suitable work parameters at that the precision tracker fulfills the requirements. Further the attenuation of a single 8 m long drift tube was measured. The software, which is used for the track reconstruction, the determination of the resolution and the efficiency was tested with computer generated data from a GEANT simulation. (orig.)

  9. Socio-political Turmoil in Mali: The Public Debate Following the Coup d’État on 22 March 2012 Sozio-politische Turbulenzen in Mali: Die öffentliche Debatte nach dem Staatsstreich vom 22. März 2012

    Directory of Open Access Journals (Sweden)

    Sten Hagberg

    2012-01-01

    Full Text Available During the night between 21 and 22 March 2012, a group of young military officers overthrew Mali’s president, Amadou Toumani Touré. The group justified the coup by citing the inability of the regime to both deal with the crisis in the North and provide the army with the appropriate material and manpower to defend the national territory. The coup plunged Mali into violence, and caused a de facto partition of the country. The socio-political turmoil pitting different political and armed factions against each other has continued unabated and has been accompanied by intense mass media debates. In this report we focus on the Malian public debate. By looking at the political class, the international community, and the partition of the country, we analyse representations and stereotypes prevailing in this debate.In der Nacht vom 21. zum 22. März 2012 wurde der Präsident Malis, Amadou Toumani Touré, durch eine Gruppe junger Offiziere gestürzt. Die Gruppe rechtfertigte den Putsch, indem sie auf die Unfähigkeit des Regimes verwies, die Krise im Norden zu bewältigen und die Armee personell und materiell angemessen auszustatten, um die Grenzen das Landes verteidigen zu können. Der Staatsstreich stürzte Mali in eine gewaltsame Auseinandersetzung und führte zu einer faktischen Teilung des Landes. Die sozio-politischen Turbulenzen, in denen verschiedene politische und bewaffnete Gruppierungen gegeneinander antraten, haben seither unvermindert angehalten und wurden von intensiven Debatten in den Massenmedien begleitet. Der vorliegende Bericht konzentriert sich auf die öffentliche Debatte in Mali. Vor dem Hintergrund der politischen Entwicklung des Landes, der Positionen der internationalen Gemeinschaft und der Ursachen für die Teilung des Landes stellen die Autoren die Darstellungsweisen und Stereotypen dar, die in dieser Debatte Verwendung finden.

  10. Electron characterization in OPERA Experiment; Caracterisation des electrons dans l'experience OPERA

    Energy Technology Data Exchange (ETDEWEB)

    Caffari, Yvan [Institut de Physique Nucleaire de Lyon, 4, Rue Enrico Fermi, 69622 Villeurbanne Cedex (France); Universite Claude Bernard Lyon-I, 43 boulevard du 11 Novembre 1918, 69622 Villeurbanne cedex (France)

    2006-09-15

    In 1998 by making use of a water Cherenkov detector the Super-Kamiokande Experiment in Japan has measured a deficit of {nu}{sub {tau}} atmospheric neutrinos without observing a corresponding rise in the {nu}{sub e} flux. This phenomenon is understood as neutrino oscillations, a mechanism implying a non vanishing neutrino mass. In 1999 the CHOOZ Experiment has definitely excluded the oscillations {nu}{sub {mu}} {yields} {nu}{sub e} within atmosphere. The OPERA Experiment aims at evidencing the {nu}{sub {mu}} {yields} {nu}{sub {tau}}oscillations through occurrence of {nu}{sub {tau}} and of {nu}{sub {mu}} {yields} {nu}{sub e} oscillations by occurrence of {nu}{sub e} starting from a muon neutrino beam almost totally clean. Such a beam is actually produced at CERN (CNGS beam) in Switzerland and then directed upon the OPERA detector located 732 km southward under Gran Sasso mountains in Italy. The detector consists of more than 200,000 bricks (what amounts to a total mass of 1,800 tons made up of a nuclear emulsion foils / lead foils sandwich. This module structure allows reconstructing with a high spatial resolution ({delta}{sub {theta}} {approx_equal} 1 mrad and {delta}{sub r} {approx_equal} 1 {mu}m) the kink topology created by the {tau} lepton (issued from charged current interaction of a {nu}{sub {tau}} lepton with a lead nucleus) and its decay products. The work reported in this thesis consists in characterization of the electrons needed in the study of {nu}{sub {mu}} {yields} {nu}{sub {tau}}oscillations, with {tau} {yields} e, and the {nu}{sub {mu}} {yields} {nu}{sub e} oscillations, the {nu}{sub e} interacting through charged currents with a lead nucleus and producing an electron. A reconstruction algorithm of the electromagnetic cascades in nuclear emulsion was developed. This algorithm allows reproducing the longitudinal and transverse profiles used in evaluating the electron energies and their identification as well ({pi}/e separation by mean of a neuron

  11. The OPERA experiment. ν{sub μ}→ν{sub τ} oscillation discovered in appearance mode

    Energy Technology Data Exchange (ETDEWEB)

    Buettner, Benjamin [Universitaet Hamburg, Institut fuer Experimentalphysik (Germany); Collaboration: OPERA-Hamburg-Collaboration

    2016-07-01

    The primary goal of the OPERA long-baseline neutrino oscillation experiment is the first direct detection of ν{sub μ}→ν{sub τ} oscillations. The hybrid OPERA detector consists of a large-mass target made from lead and photo emulsions - providing micrometric resolution - and electronic detector parts for online readout. It is located in the LNGS underground laboratory, at a distance of 730 km from the SPS at CERN, where the CNGS ν{sub μ} beam is produced. The measurement of ν{sub τ} appearance relies on the detection of the decay of τ leptons which are created in ν{sub τ} charged current reactions. Data acquisition lasted from 2008 to 2012. With the collected data the OPERA experiment discovered ν{sub τ} appearance in the CNGS neutrino beam with a significance of 5.1 σ. This poster will give an overview about the OPERA experiment and the discovery of τ neutrino appearance in the CNGS neutrino beam.

  12. Nach dem Deutschstudium in Afrika wird man – was? Eine ...

    African Journals Online (AJOL)

    This paper reports on an investigation of the value of German Studies in eventual employment of students in this field. The objectives of German Studies in Africa have to include an indication of how inclusion in the curriculum is legitimized. Three approaches towards legitimization have developed since the establishment of ...

  13. Nach dem Deutschstudium in Afrika wird man – was? Eine ...

    African Journals Online (AJOL)

    Eva Hamann. 196. 2. Die Legitimierungsdebatte. Die Debatte um die Legitimierung und Relevanz des Studienfachs Deutsch in Afrika, geführt von afrikanischen Auslandsgermanisten, spiegelt sich ab den 80er Jahren in afrikanischen. Periodika wie Études Germano-Africaines und in deutschen Periodika wie Jahrbuch DaF.

  14. Die Frage nach Gerechtigkeit.

    Directory of Open Access Journals (Sweden)

    Martin Jäggle

    2014-07-01

    Full Text Available ENGLISH: In the first part six stages in the author’s path of life are described, which have influenced his engagement with justice. The second part gives an insight into his religious educational work, in which the issue of justice was especially significant on the example of ‘religion in the context of migration’ and of the ecumenic initiative ‘lebens.werte.schule’ (school worth living. The vision of the Kingdom of God and the necessity of participation become apparent. DEUTSCH: Im ersten Teil werden sechs Stationen am Lebensweg des Autors beschrieben, die seine Auseinandersetzung mit Gerechtigkeit geprägt haben. Der zweite Teil gibt Einblick in seine religionspädagogische Arbeit, in der die Frage nach Gerechtigkeit besonders bedeutsam war am Beispiel ‚Religion im Kontext Migration‘ und der ökumenischen Initiative ‚lebens.werte.schule‘. Die Vision vom Reich Gottes und die Notwendigkeit von Partizipation werden dabei deutlich.

  15. Suche nach Charginos in 4 Jet Ereignissen bei LEP2

    CERN Document Server

    AUTHOR|(CDS)2086503

    1997-01-01

    Zum heutigen Tag sind der Hochenergiephysik einige Hundert Teilchen und Teilchenzustände bekannt, die dem Anschein nach auf sehr komplexe Weise wechselwirken und so die beobachtbare Welt konstituieren. Bei näherer Betrachtung sind jedoch nur wenige Teilchen und Wechselwirkungen elementar, in dem Sinne, dass die übrigen sich als aus ihnen zusammengesetzt ansehen lassen. Die Frage, wie man diese elementaren Teilchen und ihre fundamentalen Wechselwirkungen systematisch beschreiben kann, beantwortet das Standardmodell der Elementarteilchenphysik. Es verwendet das Spektrum der fundamentalen Materie, die inneren Symmetrieeigenschaften dieses Spektrums und das Eichprinzip, um eine Beschreibung im Rahmen der Quantenfeldtheorie zu formalisieren. Das Standardmodell leistet so eine prinzipielle Beschreibung der bis heute betrachteten Hochenergiephysik. Dabei treten allerdings einige Probleme auf, die es attraktiv erscheinen lassen, das Standardmodell um eine weitere Symmetrieeigenschaft zu erweitern, nämlich um die ...

  16. Development of an automatic scanning system for nuclear emulsion analysis in the OPERA experiment and study of neutrino interactions location

    International Nuclear Information System (INIS)

    Arrabito, L.

    2007-10-01

    Following Super Kamiokande and K2K experiments, Opera (Oscillation Project with Emulsion tracking Apparatus), aims to confirm neutrino oscillation in the atmospheric sector. Taking advantage of a technique already employed in Chorus and in Donut, the Emulsion Cloud Chamber (ECC), Opera will be able to observe the ν μ → ν τ oscillation, through the ν τ appearance in a pure ν μ beam. The Opera experiment, with its ∼ 100000 m 2 of nuclear emulsions, needs a very fast automatic scanning system. Optical and mechanics components have been customized in order to achieve a speed of about 20 cm 2 /hour per emulsion layer (44 μm thick), while keeping a sub-micro-metric resolution. The first part of this thesis was dedicated to the optimization of 4 scanning systems at the French scanning station, based in Lyon. An experimental study on a dry objective scanning system has also been realized. The obtained results show that the performances of dry scanning are similar with respect to the traditional oil scanning, so that it can be successfully used for Opera. The second part of this work was devoted to the study of the neutrino interaction location and reconstruction strategy actually used in Opera. A dedicated test beam was performed at CERN in order to simulate Opera conditions. The obtained results definitely confirm that the proposed strategy is well adapted for tau search. (author)

  17. Sacherschliessung nach RDA

    Directory of Open Access Journals (Sweden)

    Hans Schürmann

    2015-05-01

    Full Text Available Die Resource Description and Access (RDA wird für den deutschsprachigen Raum das neue Regelwerk für die bibliothekarische Erschliessung der Bestände. In diesem Regelwerk wird auch die Sacherschliessung neu geregelt. Zurzeit sind diese Seiten noch leer. Doch wie soll ein Regelwerk für die Sacherschliessung aussehen? Kriterien für eine Regelung fehlen, zu stark hat sich das Umfeld der Inhaltserschliessung in den letzten Jahren geändert. Auch von der Schlagworttheorie her sind noch keine Hinweise in Sicht. Deshalb wird in verschiedenen Gremien intensiv diskutiert, wie eine zukunftsfähige Sacherschliessung aussehen könnte. In welchem Rahmen bewegt sich die Diskussion und woran soll sich die Regelwerksentwicklung für den Sachkatalog orientieren? Der Beitrag erwägt zwischen der Sachkataloggeschichte einerseits und dem modernen Datenmanagement im Netz andererseits die Bedeutung und die Rolle eines Sacherschliessungsregelwerks. Resource Description and Access (RDA will be the new standard for descriptive cataloguing in the German-speaking countries. Under RDA, subject indexing will also be redefined, although, at present, the relevant pages remain blank. This article ponders the question what these new standards could look like. As yet no clear criteria have emerged – the field of subject indexing has undergone too much change in recent years for that. Nor does the theory appear to offer any answers at the moment. There is therefore intensive and ongoing debate in the various forums. What is the framework of these discussions and what are the key criteria? The article summarizes them and considers the importance of indexing standards in the light of both the history of indexing and modern data management on the web.

  18. Zuwanderung nach Österreich. Integrationspolitische Herausforderungen

    Directory of Open Access Journals (Sweden)

    Heinz Faßmann

    2016-12-01

    Full Text Available ENGLISH: Since the early 1960ies, Austria has become an immigration country against its will. In the beginning, the migration of Guestworkerswas a flexible supplement of the national labour market. Gradually it developed towards a permanent immigration.With the accession to the European Union Austria became a part of the common European migration era. The immigration fromthird countries lost importance, the immigration from other member states gained. Beside, Austria was always a target countryfor asylum seekers. The structural characteristics of the immigrants as well as the historical context showed some changes. Therefore,the integration processes happened differently. While the integration of the immigrants from other member states –especially from Germany – performed conflict – free and quick, the integration of the guestworkers and their descendants proceededonly stepwise. A similar stepwise and long lasting integration process can be expected for the asylum seekers due totheir qualification and their cultural background. Therefore, the cultural diversity will increase and it is not always an enrichmentonly, but also a reason of conflicts about the valid societal perspectives. DEUTSCH: Österreich hat sich seit den 1960er zu einem Einwanderungsland wider Willen entwickelt. Anfangs war die Zuwanderung vonGastarbeiterInnen eine flexible Ergänzung des nationalen Arbeitsmarktes. Nach und nach entwickelte sich daraus aber eine dauerhafteZuwanderung. Mit dem Beitritt zur Europäischen Union wurde Österreich auch Teil eines Europäischen Wanderungsraums.Die Zuwanderung aus den Drittstaaten verlor an Bedeutung, die Zuwanderung aus anderen Mitgliedstaaten der EuropäischenUnion wurde wichtiger. Daneben war Österreich auch immer wieder Aufnahmeland von Asylwerbern. Die strukturellenMerkmale der Zugewanderten und der zeitliche Kontext der Zuwanderung waren ungleich. Daher verliefen auch die Integrationsprozessesehr unterschiedlich. W

  19. Postoperative Verlaufskontrollen beim Ulcus cruris nach Shave-Operation und Hauttransplantation

    OpenAIRE

    Pantelaki, Ioanna

    2016-01-01

    \\(\\bf Hintergrund:\\) Die Arbeit hat das Ziel die Shave-Operation mit Meshgraft-Deckung hinsichtlich der Einheilungsrate und der Schmerzreduktion zu untersuchen. \\(\\bf Methoden:\\) 56 Patienten mit einem Ulcus cruris unterzogen sich dem genannten Eingriff. Vor und 6 Monate nach der Operation wurden die Ulkusgröße, die bakterielle Besiedlung und die Schmerzintensität analysiert. \\(\\bf Ergebnis:\\) Bei 42,86% der Patienten konnte eine Abheilung erreicht werden, wobei die Ergebnisse hoch sign...

  20. Search of neutrino oscillations by ντ appearance with τ decay in the muonic channel in OPERA experiment

    International Nuclear Information System (INIS)

    Tran, N.T.

    2010-10-01

    Neutrino oscillations, based on a change of flavor state of a neutrino during its propagation, can explain the deficits observed on solar and atmospheric neutrinos and provide some interesting indications for physics beyond the Standard Model by studying the mixing angles and the hierarchy of neutrino mass. The OPERA experiment is the first experiment designed to observe the appearance of a ν τ by the oscillation of the ν μ to ν τ in the CNGS beam from CERN to Gran Sasso. OPERA is a hybrid detector combining both the technique of an on time electronic detection and the technique of emulsion cloud chamber (ECC). The ECC detector is a passive detector (target) of 150.000 bricks, each one consisting of sheets of lead, used as target, alternating with nuclear photographic emulsions whose accuracy of track reconstruction is about one micron. The detector also includes two spectrometers with magnetized iron plates 5 cm thick alternating with RPC (resistive plate chamber) associated with six sets of drift tubes for the measurement of the charge and momentum of the muon. It includes also a Veto plane used for rejection of particles coming outside the target. This detector simultaneously allows a high spatial resolution and a large target mass which are two very conditions necessary for collecting charged current neutrino interactions from oscillated ν τ and observing the decay topology of τ. This thesis presents a study on tau decay in the muonic channel. It has contributed to 1) the development of an algorithm for the selection of the neutrino interactions in the target, 2) the studies on the muon identification in electronic detectors and the connection of its trace with those reconstructed in the emulsions, which represent a fundamental point both for the tau signal identification as the rejection of charmed background, 3) the development of a neural network to discriminate the signal from the charmed background regardless of the muon identification in

  1. Sterblichkeit: der paradoxe Kunstgriff des Lebens - Eine Betrachtung vor dem Hintergrund der modernen Biologie

    Science.gov (United States)

    Verbeek, Bernhard

    Leben gibt es auf der Erde seit fast 4 Mio. Jahren, trotz allen Katastrophen. Die Idee des Lebens scheint unsterblich. Der Tod aber offenbar auch. Jedes Lebewesen ist davon bedroht, ja für Menschen und andere "höhere“ Lebewesen ist er im Lebensprogramm eingebaut - todsicher. Diese Tatsache ist alles andere als selbstverständlich. Ist sie überhaupt kompatibel mit dem Prinzip der Evolution, nach dem der am besten Angepasste überlebt?

  2. kawaihae_dem.grd

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NGDC builds and distributes high-resolution, coastal digital elevation models (DEMs) that integrate ocean bathymetry and land topography to support NOAA's mission to...

  3. Von Kalifornien nach Taxham / Katri Soe

    Index Scriptorium Estoniae

    Soe, Katri, 1971-

    2005-01-01

    Neljas osa magistritööst "Von Kalifornien nach Taxham: Formen und Strukturen der Kommunikation in Peter Handkes Romanen "Der kurze Brief zum langen Abschied" und "In einer dunklen Nacht ging ich aus meinem stillen Haus"" (Tartu, 2000. Juhendaja: Claus Sommerhage)

  4. Bewegungseinschränkung nach vorderer Kreuzbandrekonstruktion

    OpenAIRE

    Weig, Thomas G.

    2002-01-01

    5. Zusammenfassung: 223 Patienten , die sich einer Revision bei Bewegungseinschränkung nach Vorderer Kreuzbandrekonstruktion unterzogen hatten , wurden nachuntersucht. Es wurde eine Arthrofibrosegruppe (n=156; 70%) und eine Cyclops-Gruppe (n=67; 30%) gebildet. Es bestand ein durchschnittlicher Zeitraum zwischen Arthrolyse und Nachuntersuchung von 4,29 Jahren. Der Zeitabstand zwischen Unfall und vorderer Kreuzbandplastik, die Begleitverletzungen, der Reizzustand, die Schme...

  5. Coastal Digital Elevation Models (DEMs)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Digital elevation models (DEMs) of U.S. and other coasts that typically integrate ocean bathymetry and land topography. The DEMs support NOAA's mission to understand...

  6. The OPERA Experiment. Latest results

    Energy Technology Data Exchange (ETDEWEB)

    Hollnagel, Annika [Universitaet Hamburg, Institut fuer Experimentalphysik (Germany); Collaboration: OPERA-Hamburg-Collaboration

    2015-07-01

    The long-baseline neutrino oscillation experiment OPERA has been designed for the direct observation of ν{sub τ} appearance in the CNGS ν{sub μ} beam. The OPERA detector is located at the LNGS underground laboratory, with a distance of 730 km from the neutrino source at CERN. It is a hybrid detector, combining the micrometric precision of emulsion cloud chambers with electronic detector elements for online readout. While CNGS beam data taking lasted from 2008 to 2012, the neutrino oscillation analysis is still ongoing. Updated results with increased statistics are presented, including the recent observation of ν{sub τ} appearance.

  7. PV systems: Things are improving again. Medium-sized enterprises are getting into the solar module business; Photovoltaik: Nach Talfahrt wieder aufwaerts. Mittelstaendische Firmen steigen ins Solarmodulgeschaeft ein

    Energy Technology Data Exchange (ETDEWEB)

    Lemme, H.

    1996-06-25

    At the 11th `Symposium for Photovoltaic Solar Energy Conversion`, which was held at Banz Monastery, the drastic decline of the German solar celll production was discussed. Especially the closing down of ASE Wedel gave rise to dark speculations. However, some experts think the problem will be solved now that several medium-sized enterprises have entered the solar market. (HW) [Deutsch] Auf dem elften `Symposium photovoltaische Solarenergie` im Kloster Benz wurde der drastische Rueckgang der deutschen Solarzellenproduktion diskutiert. Insbesondere bereitete die Schliessung des Wedeler ASE-Werkes einige Sorgen. Nach Meinung verschiedener Fachleute scheint sich das Problem jedoch zu loesen, nachdem mehrere mittelstaendische Betriebe auf dem Solarsektor eingestiegen sind. (HW)

  8. Avascular bone necrosis: MR imaging findings before and after core decompression; MR-Tomographie avaskulaerer Knochennekrosen: Primaerbefunde und Verlaufsbeobachtungen nach Markraumdekompression

    Energy Technology Data Exchange (ETDEWEB)

    Adam, G [Technische Hochschule Aachen (Germany). Klinik fuer Radiologische Diagnostik; Keulers, P [Technische Hochschule Aachen (Germany). Klinik fuer Radiologische Diagnostik; Forst, J [Technische Hochschule Aachen (Germany). Klinik fuer Orthopaedie; Neuerburg, J [Technische Hochschule Aachen (Germany). Klinik fuer Radiologische Diagnostik; Kilbinger, M [Technische Hochschule Aachen (Germany). Klinik fuer Radiologische Diagnostik; Guenther, R W [Technische Hochschule Aachen (Germany). Klinik fuer Radiologische Diagnostik

    1995-10-01

    17 patients with avascular epiphyseal necrosis were examined by MRI using T{sub 1}-weighted spin echo sequences before and after gadopentetate dimeglumine application, T{sub 2}-weighted spin echo sequences and in some patients with fat-saturated 2D gradient echo sequences up to 22 months after core decompression. All patients but one recovered from symptoms after core decompression. Although the signal morphology of the necrotic area remained unchanged in the majority of the cases, a decrease of the joint effusion was observed as well as an ongoing signal increase after gadopentetate dimeglumine application. The last examinations displayed similar signal characteristics as on the preoperative scans; however, a reduction of the necrotic zone became evident. (orig./MG) [Deutsch] 17 Patienten mit avaskulaerer Epiphysennekrose wurden mit T{sub 1}-gewichteten Spin-Echo-Sequenzen vor und nach Gadolinium-DTPA-Gabe, T{sub 2}-gewichteten Spin-Echo-Sequenzen und teilweise mit fettsupprimierten 2-D-Gradienten-Echo-Sequenzen bis zu 22 Monate nach Markraumdekompression untersucht. Mit einer Ausnahme waren alle Patienten nach dem Eingriff beschwerdefrei. Obwohl sich die Signalmorphologie zunaechst nicht oder wenig aenderte, konnte eine Abnahme des begleitenden Gelenkergusses bei weiterhin nachweisbarem Signalanstieg im Nekroseareal nach Kontrastmittelgabe beobachtet werden. Bei den letzten Untersuchungen nach Dekompression (bis zu 22 Monate) konnten zum Teil noch aehnliche Signalveraenderungen wie bei der Erstuntersuchung, jedoch keine Verkleinerung des Nekroseareals nachgewiesen werden. (orig./MG)

  9. Alles Banane? Fiktionale Erinnerung an DDR und Wende in den ersten zwanzig Jahren nach dem Mauerfall

    NARCIS (Netherlands)

    Maczka, Iwona Maria

    2010-01-01

    How are the GDR and the fall of the Berlin Wall remembered? The dissertation “Alles Banane?” deals with this question. It assumes that identity, individual as well as collective, is a social, cultural and political construction based on the memory of the past. This construction is not only

  10. Never let me go : ein Drehbuch nach dem gleichnamigen Roman von Kazuo Ishiguro

    OpenAIRE

    Wendel, Johann

    2011-01-01

    By their very existence, adaptations remind us there is no such thing as an autonomous text or an original genius transcending history, either public or private. They also affirm, however, that this is not to be lamented. - Linda Hutcheon, A Theory of Adaptation (2006) 1 Einführung Adaptionen - ob sie auf einer Literaturvorlage, einem Zeitungsbericht oder einem historischen Ereignis basieren - sind in der heutigen Filmindustrie eher die Regel als die Ausnahme: so waren laut eine...

  11. Looking for the super battery; Suche nach dem Super-Akku

    Energy Technology Data Exchange (ETDEWEB)

    Janzing, Bernward

    2010-09-15

    Germany used to be a leading country in electric battery technology. Today, it is far behind Asia. This may change as the new research center at Ulm starts working. The focus of the institution will be on lithium ion accumulator batteries for electric-powered vehicles. (orig.)

  12. Suche nach solaren Axionen mit dem CCD-Detektor in CAST (CERN Axion Solar Telescope)

    CERN Document Server

    Kang, Donghwa

    2007-01-01

    The CERN Axion Solar Telescope (CAST) experiment at CERN searches for solar axions with energies in the keV range. Axions could be produced in the Sun's core by the interaction of thermal photons with virtual photons of the strong electromagnetic field. In this experiment, the solar axions can be converted to photons in the field of a 9 Tesla superconducting magnet. At both ends of the 10 m long dipole magnet, three different X-ray detectors were installed, which are sensitive in the interesting photon energy range. This thesis is devoted to the determination of an upper limit on the axion-photon coupling constant g$_{a\\gamma}$. The analysis is based on the data taken by the CCD detector in the CAST experiment during the years 2003 and 2004. First results of the 2003 data taking were published showing no significant signal above background. However, these results constrain the upper limit of the axion-photon coupling constant by a factor 5 compared to previous axion search experiments. Moreover, the result of...

  13. Heidegger und der Nationalsozialismus oder die Frage nach dem philosophischen Empirismus

    NARCIS (Netherlands)

    Blok, V.

    2010-01-01

    This contribution discusses the philosophical meaning of Martin Heidegger’s Rectoral address. Firstly, Heidegger’s philosophical basic experience (Grunderfahrung) is sketched as providing the background of his Rectoral address: the being-historical concept of beginning (Anfang). Next, the

  14. Indirect MR-arthography in the fellow up of autologous osteochondral transplantation; Indirekte MR-Arthrographie zur Verlaufskontrolle nach autologer osteochondraler Transplantation

    Energy Technology Data Exchange (ETDEWEB)

    Herber, S.; Pitton, M.B.; Kalden, P.; Thelen, M.; Kreitner, K.F. [Mainz Univ. (Germany). Klinik und Poliklinik fuer Radiologie; Runkel, M. [Mainz Univ. (Germany). Klinik und Poliklinik fuer Unfallchirurgie

    2003-02-01

    following autologous osteochondral transplantation. Assessment of transplant vitality, osseous fixation and stability is possible. (orig.) [German] Zielsetzung: Evaluation der Befunde nach indirekter MR-Arthrographie bei Patienten mit autologer osteochondraler Transplantation. Patienten und Methoden: 10 konsekutive Patienten mit einer Mosaik-Plastik wurden drei, 6 und 12 Monate nach dem Eingriff mittels indirekter MR-Arthrographie untersucht. Das MR-Protokoll bei 1,5T beinhaltete neben nativen PD- und T{sub 2}-gewichteten TSE-Sequenzen mit und ohne Fett-Suppression T{sub 1}-gewichtete, fettsupprimierte SE-Sequenzen vor und unmittelbar nach Kontrastmittelgabe sowie nach Bewegung des Gelenkes. Die Bildanalyse wurde gemeinsam von zwei Radiologen durchgefuehrt und beinhaltete die Auswertung der Signalintensitaet (SI) und Integritaet des knoechernen Zylinders ebenso wie der Knorpeloberflaeche, das Vorhandensein eines Knochenmarkoedems und eines Gelenkergusses. Ergebnisse: Drei Monate nach dem Eingriff zeigte sich in allen Faellen in der T{sub 2}-TSE-Sequenz ein ausgepraegtes Knochenmarkoedem auf Empfaenger- und Donorseite, korrespondierend zu einem deutlichem Signalintensitaetsanstieg nach Kontrastmittelgabe. Die Grenzzone zwischen dem Transplantat und dem originaerem Knochen zeigte eine erhoehte SI nach drei und 6 Monaten in der T{sub 2}-TSE-Sequenz sowie nach i.v. Gd-DTPA-Gabe. Eine Transplantatdislokation wurde in keinem Fall beobachtet. Als Zeichen der Vitalitaet des osteochondralen Transplantats normalisierte sich das Marksignal in der T{sub 1}-SE-Sequenz in den meisten Faellen nach 6 bzw. 12 Monaten. Die indirekte MR-Arthrographie war dem Nativ-Scan ueberlegen bei der Beurteilung der knorpeligen Ueberdeckung des Transplantats. In allen Faellen zeigte sich eine komplette Ueberdeckung des knoechernen Zylinders mit Gelenkknorpel. Transplantierter und originaerer hyaliner Knorpel zeigten einen deutlichen Anstieg der SI in der indirekten MR-Arthrographie. Signalalterationen und

  15. Das Alter ist der wichtigste Risikofaktor der postoperativen erektilen Dysfunktion nach radikaler nerverhaltender Prostatektomie

    Directory of Open Access Journals (Sweden)

    Gruschka M

    2009-01-01

    Full Text Available Die radikale Prostatektomie ohne Nerverhalt geht mit Impotenz einher. Bei nerverhaltendem Vorgehen kann das Risiko der erektilen Dysfunktion gesenkt, aber nicht ausgeschlossen werden. Die präoperative Beratung der Patienten erfordert bei nerverhaltender Prostatektomie die Kenntnis der Faktoren, die Einfluss auf die postoperative Potenz haben. Patienten & Methoden: 110 Patienten antworteten 24 Monate nach radikaler perinealer nerverhaltender Prostatektomie auf einen per Post übermittelten Fragebogen. Die Patienten wurden, entsprechend dem Erection Hardness Score, nach der Rigidität ihrer Erektionen befragt. Überwiegend erfolgte der Nerverhalt unilateral (104/110. Verschiedene potenzielle Risikofaktoren (Alter, Qualität der präoperativen Erektion, Serum-PSA, Gleason-Score, Tumorvolumen, Prostatavolumen, adjuvante Strahlentherapie, ASA-Score, Chronic Disease Score [CDS], arterielle Hypertonie, Hypercholesterinämie, Diabetes mellitus, KHK, Nikotinkonsum wurden univariat mit der postoperativ erzielten Potenz korreliert. Multivariat wurden dann jene Parameter untersucht, die in der univariaten Analyse einen signifikanten (p ≤ 0,05 oder einen tendenziellen Zusammenhang (p ≤ 0,2 mit der postoperativen erektilen Funktion aufwiesen. Ergebnisse:Das Alter (p 0,001 und der ASAScore (p = 0,018 waren in der univariaten Analyse negative Prädiktoren der postoperativen Potenz. In der multivariaten Analyse war lediglich das Alter (p = 0,028 von signifikanter Bedeutung. Mit jedem Lebensjahr der Männer steigt das Risiko einer um eine Stufe im EHS schlechteren Erektion um das 1,128-Fache an. Bei einem Altersunterschied von 10 Jahren ist das Risiko eines postoperativ schlechteren Erektionsvermögens um den Faktor 3,334 erhöht, bei einem um 20 Jahre höheren Alter beträgt dieser Faktor 11,121. Diskussion & Praxisrelevanz: Das Lebensalter der Patienten wurde im Einklang mit der Literatur als signifikanter Faktor für die postoperative Potenz identifiziert

  16. Coastal DEMs with Cross-Track Interferometry

    NARCIS (Netherlands)

    Greidanus, H.S.F.; Huising, E.J.; Platschorre, Y.; Bree, R.J.P. van; Halsema, D. van; Vaessen, E.M.J.

    1999-01-01

    Digital elevation models (DEMs) are produced from airborne radar cross-track interferometric measurements. Radar DEMs recorded from perpendicular orientations are intercompared, and compared to DEMs derived from airborne laser altimetry

  17. Zukunftssicherung für die Zeit nach der Krise

    OpenAIRE

    Ackermann, Karl-Friedrich; Wehner, Martina

    2009-01-01

    Die Studie berichtet zusammenfassend über die Ergebnisse der 9. HR-Expertenbefragung mit der Zeitschrift „Personalwirtschaft“ zum Thema „Employer Branding“. Berichtet wird über die Verbreitung des Employer Branding, die dabei verfolgten Ziele und die Instrumente, mit denen ein erfolgreiches Employer Branding realisiert werden kann. Eng damit verbunden sind ergänzende Fragen nach den Einflussfaktoren und den Gestaltungsmöglichkeiten der Arbeitgebermarke sowie nach den eingesetzten Methoden zur...

  18. Endovascular brachytherapy to prevent restenosis after angioplasty; Endovaskulaere Brachytherapie in der Restenoseprophylaxe nach Angioplastie und Stentimplantation: Eine Uebersicht

    Energy Technology Data Exchange (ETDEWEB)

    Wohlgemuth, W.A.; Bohndorf, K. [Klinikum Augsburg (Germany). Klinik fuer Diagnostische Radiologie und Neuroradiologie

    2003-02-01

    besteht bei Patienten mit erhoehtem Risiko eine Restenose wie beispielsweise einer Rezidivstenose, einer In-Stent-Hyperplasie, langen ueberstenteten Laesionen, einer langen PTA-Strecke, kleinen Restlumina und Patienten mit Diabetes mellitus. Daten aus dem koronaren Stromgebiet legen nahe, dass waehrend der Bestrahlung ein Sicherheitsabstand von mindestens 4-10 mm beidseits der durch PTA traumatisierten Gefaessstrecke eingehalten werden sollte, um Restenosen an den Bestrahlungsraendern zu vermeiden. Zur Prophylaxe einer Spaetthrombosierung nach Bestrahlung wird im koronaren Stromgebiet eine medikamentoese Begleittherapie mit ASS 100 mg und Clopidogrel 75 mg taeglich ueber mindestens 6 Monate nach PTA und 12 Monate nach Stentneumimplantation empfohlen, gesicherte Erkenntnisse fuer periphere Arterien existieren noch nicht. (orig.)

  19. Metatheoriebildung in der dialogischen Konfliktbearbeitung – ein konzeptioneller Vorschlag am Beispiel der Konflikttransformation nach Galtung und des Konfliktmanagements nach Glasl und des Integralen Ansatzes nach Wilber

    Directory of Open Access Journals (Sweden)

    Karim Fathi

    2010-07-01

    , Empathie, Kreativität ermöglichen. Darüber hinaus unterscheidet Galtung unter anderem auch drei Phasen des Konflikts (vor, während, nach der Gewalt. c. Der IA versteht sich als eine Methode des metatheoretischen „Map makings“. Mittels fünf Kategorien – Quadranten, Ebenen, Linien, Typen, Zustände (zusammen AQAL – folgt der IA dem Anspruch, so vielen Aspekten der Realität wie möglich in einem Gesamtkonzept Rechnung zu tragen. 2. Skizze eines Integrationsmodells: a. Möglichkeit zur epistemologischen Integration der vorgestellten Konfliktbearbeitungsansätze:Mittels der fünf Dimensionen des AQAL lassen sich die epistemologischen Schwerpunkte der Ansätze von Glasl und Galtung darstellen. Ein gegenseitiger Ergänzungspunkt bietet sich vor allem bei der kombinierten Berücksichtigung eines vertikalen Spektrums von Eskalationsstufen (Glasl und eines horizontalen Rasters von mehreren Gewaltbereichen (Galtung. b. Vorschlag für ein heuristisches Gesamtkonzept:Der IA stellt keine heuristisch-praktische Methode dar, daher ist es in diesem Fall sinnvoll, die AQAL-Kategorien anzupassen und sogar neue Kategorien, die für die Friedens- und Konfliktforschung besonders relevant sind, zu berücksichtigen. Das heuristische Gesamtkonzept nimmt das vertikale Konfliktschema von Galtung (drei Phasen des Konflikts und Glasl (Eskalationsmodell zum Ausgangspunkt und berücksichtigt zusätzlich auf jeder Ebene horizontale Untersuchungskriterien (z.B. Quadranten: Gewaltart etc.3. Fazit und Kritik: Die Untersuchungen dieser Arbeit verdeutlichen, dass der Mehrwert des IA für die Friedens- und Konfliktforschung vor allem darin liegt, die epistemologischen Bezugspunkte unterschiedlicher Ansätze zu integrieren. Am Beispiel der Ansätze von Glasl und Galtung zeigt sich aber auf, dass ein heuristisches Metamodell zusätzliche Metakategorien erfordert, die von der Schematisierung des IA nicht erfasst werden. Es lässt sich daher schließen, dass sich die Metatheoriebildung für die

  20. Präoperative Vorhersge der Rezidivrate des klinisch lokalisierten Prostatakarzinoms nach einer radikalen Prostatektomie

    Directory of Open Access Journals (Sweden)

    Graefen M

    1999-01-01

    Full Text Available Die radikale Prostatektomie scheint die zur Zeit effektivste Therapie des klinisch lokalisierten Prostatakarzinoms zu sein. Dennoch liegt die Rezidivrate bei bis zu 40 % der operierten Patienten. Mit dieser Arbeit wurde anhand präoperativer Befunde ein Algorithmus entwickelt, mit welchem die Prognose des klinisch lokalisierten Prostatakarzinoms bereits vor einer operativen Therapie abgeschätzt werden kann. Hierzu wurden multiple präoperative Befunde, welche bei der Diagnose des Prostatakarzinoms erhoben werden, bezüglich ihres Einflusses auf einen PSA-Progress nach radikaler Prostatektomie geprüft. Dies erfolgte mittels einer univariaten Kaplan-Meier Analyse sowie einer multivariaten Statistik (Cox-Regression und CART-Analyse. Schwerpunkt bildete hierbei die Einbeziehung der Ergebnisse der systematischen Sextanten-Biopsie der Prostata. Alle präoperativen Befunde haben in der univariaten Kaplan-Meier Analyse einen signifikanten Einfluß auf ein PSA-Rezidiv. In der Cox-Regression hatte der Anteil an niedrigdifferenziertem Prostatakarzinom den größten Einfluß auf das Auftreten eines Tumorprogresses, gefolgt von der Anzahl der positiven Stanzen in der Biopsie und dem präoperativen PSA-Wert; alle anderen Parameter hatten keinen unabhängig signifikanten Einfluß auf den Tumorprogress. Mittels der zusätzlich durchgeführten CART Analyse konnten verschiedene Risikogruppen definiert werden, deren Rezidivrisiko bei 3 % für Patienten mit geringem Rezidivrisiko sowie 80 % für solche mit einem hohen Rezidivrisiko 2 Jahre nach der Operation betrug. Der niedrigdifferenzierte Tumoranteil hat somit den größten Einfluß auf die Prognose eines klinisch lokalisierten Prostatakarzinoms. Anhand der präsentierten CART-Analysen wurden einfach anwendbare Entscheidungsbäume entwickelt, mit denen eine Abschätzung des Therapieerfolges des klinisch lokalisierten Prostatakarzinoms bereits vor einer Operation möglich ist.

  1. Radar and Lidar Radar DEM

    Science.gov (United States)

    Liskovich, Diana; Simard, Marc

    2011-01-01

    Using radar and lidar data, the aim is to improve 3D rendering of terrain, including digital elevation models (DEM) and estimates of vegetation height and biomass in a variety of forest types and terrains. The 3D mapping of vegetation structure and the analysis are useful to determine the role of forest in climate change (carbon cycle), in providing habitat and as a provider of socio-economic services. This in turn will lead to potential for development of more effective land-use management. The first part of the project was to characterize the Shuttle Radar Topography Mission DEM error with respect to ICESat/GLAS point estimates of elevation. We investigated potential trends with latitude, canopy height, signal to noise ratio (SNR), number of LiDAR waveform peaks, and maximum peak width. Scatter plots were produced for each variable and were fitted with 1st and 2nd degree polynomials. Higher order trends were visually inspected through filtering with a mean and median filter. We also assessed trends in the DEM error variance. Finally, a map showing how DEM error was geographically distributed globally was created.

  2. Digitial Elevation Model (DEM) 100K

    Data.gov (United States)

    Kansas Data Access and Support Center — Digital Elevation Model (DEM) is the terminology adopted by the USG to describe terrain elevation data sets in a digital raster form. The standard DEM consists of a...

  3. Digtial Elevation Model (DEM) 250K

    Data.gov (United States)

    Kansas Data Access and Support Center — Digital Elevation Model (DEM) is the terminology adopted by the USGS to describe terrain elevation data sets in a digital raster form. The standard DEM consists of a...

  4. Digital Elevation Model (DEM) 24K

    Data.gov (United States)

    Kansas Data Access and Support Center — Digital Elevation Model (DEM) is the terminology adopted by the USGS to describe terrain elevation data sets in a digital raster form. The standard DEM consists of a...

  5. Information to go: Kommunikation im Prozess der Migration am Beispiel syrischer und irakischer Flüchtlinge auf ihrem Weg nach Deutschland

    Directory of Open Access Journals (Sweden)

    Anke Fiedler

    2016-07-01

    Full Text Available Vor dem Hintergrund der Flüchtlingsdebatte in Deutschland 2015 wird in diesem Beitrag danach gefragt, welche (Massen-Kommunikationskanäle Flüchtlinge vor, während und nach der Flucht nutzen, um sich über migrationsrelevante Themen zu informieren und sich darüber mit anderen Migrationswilligen auszutauschen. Dabei wird nicht nur die Frage nach der subjektiven Bewertung der genutzten Quellen gestellt, sondern auch untersucht, ob die Flüchtlinge eine informierte Entscheidung in den verschiedenen Phasen der Migration treffen. Auf Basis des Uses-and-Gratifications-Ansatzes und der Handlungstheorie (symbolischer Interaktionismus wurden zwischen November 2015 und Februar 2016 vier Fokusgruppen und 36 Tiefeninterviews mit syrischen und irakischen Flüchtlingen durchgeführt. Die Ergebnisse verdeutlichen, dass sich die befragten Flüchtlinge vor und während der Flucht gut informiert fühlten, da persönliche Kontakte und soziale Medien die Informationsbedürfnisse weitgehend befriedigen konnten. Informationsdefizite zeigten sich vor allem nach der Ankunft in Deutschland.

  6. 76 FR 77696 - Establishment of the Naches Heights Viticultural Area

    Science.gov (United States)

    2011-12-14

    ... Decision. SUMMARY: This final rule establishes the 13,254-acre ``Naches Heights'' viticultural area in... origin of their wines and to allow consumers to better identify wines they may purchase. DATES: Effective... consumers to identify wines they may purchase. Establishment of a viticultural area is neither an approval...

  7. Imaging before and after uterine artery embolization; Bildgebende Diagnostik vor und nach Uterusmyomembolisation

    Energy Technology Data Exchange (ETDEWEB)

    Kroencke, T.J. [Charite - Universitaetsmedizin Berlin, Radiologische Klinik, Campus Virchow-Klinikum, Berlin (Germany)

    2008-07-15

    Percutaneous catheter-based embolization treatment of symptomatic uterine fibroids has evolved into the most widely used alternative therapeutic approach to surgical treatment worldwide. Uterine artery embolization (UAE) induces infarction of leiomyomas, resulting in ischemic necrosis, hyaline degeneration, and size reduction with resolution of associated symptoms. Published experience suggests that UAE is an effective and reliable option for treating uterine fibroids with high patient satisfaction. Magnetic resonance imaging (MRI) is superior to ultrasonography for determining the site, size and number of fibroids, which is important for establishing the indication for UAE. Other potential advantages of MRI include the option of performing MR angiography (MRA) and obtaining contrast-enhanced images for monitoring the outcome of UAE and assessing possible complications after UAE. (orig.) [German] Die perkutane kathetergestuetzte Uterusmyomembolisation ist inzwischen weltweit die am meisten verbreitete Alternative zur operativen Behandlung des symptomatischen Uterus myomatosus. Der durch Embolisation der Aa. uterinae (Syn. Uterusarterienembolisation, UAE) bewirkte 'Myominfarkt' fuehrt zu ischaemischer Nekrose, hyalinem Umbau und Groessenreduktion der Myome unter Rueckbildung myomassoziierter Beschwerden. Die bisher publizierten Erfahrungen zeigen, dass es sich bei der Embolisation um eine effektive und sichere Methode mit hoher Patientinnenzufriedenheit handelt. Die Magnetresonanztomographie (MRT) ist dem Ultraschall in der fuer die Indikationsstellung wichtigen Beurteilung von Lage, Groesse und Zahl der Myomknoten ueberlegen. Weitere moegliche Vorteile ergeben sich durch den Einsatz der MR-Angiographie (MRA) sowie kontrastmittelunterstuetzter Aufnahmen zur Erfolgskontrolle und Abklaerung von Komplikationen nach Embolisation. (orig.)

  8. A review of endocrine late effects in children after brain tumor therapy; Endokrinologische Funktionsstoerungen nach Hirntumortherapie im Kindesalter

    Energy Technology Data Exchange (ETDEWEB)

    Marx, M.; Langer, T.; Beck, J.D.; Doerr, H.G. [Erlangen-Nuernberg Univ., Erlangen (Germany). Kinderklinik mit Poliklinik

    1999-07-01

    Background: Advances in the therapy of malignant brain tumors in children have led to a significant improvement in survival rates over the last few decades. As a result, the recognition and treatment of late effects have become more important. In addition to secondary tumors and deficiencies in cognitive and intellectual skills, the resulting endocrine disturbances play an important role. Method: Own data and literature review. Results: Deviations from the normal growth hormone secretion are usually recognized first and are most common, and have already been observed after conventional whole brain irradiation with 18 G. With some delay, other hypothalamopituitary deficiencies may occur, including panhypopituitarism. Puberty may come too early or too late or may not appear at all. Girls in particular, frequently experience an early and rapid pubertal development after brain tumor therapy, which may lead to further reduction in height due to an accelerated bone maturation. Functional disturbances of the thyroid and adrenal glands due to hypothalamic or pituitary deficiency are less common, and usually seen only after a radiation dose of over 40 Gy. Conclusion: Survivors of childhood brain tumors must be considered as long-term survivors, in whom the first therapy-induced long-term side effects appear almost immediately after the end of therapy. Maximum quality of life for the individual patient can only be achieved by long-term care and close cooperation of specialists in the different medical disciplines involved. (orig.) [Deutsch] Hintergrund: Fortschritte in der Therapie maligner Hirntumoren im Kindesalter haben in den letzten Jahrzehnten zu einer deutlichen Verbesserung der Ueberlebensraten gefuehrt. Daher kommt dem Erkennen therapiebedingter Spaetfolgen zunehmend eine Bedeutung zu. Neben Zweittumoren, kognitiven und intellektuellen Einbussen spielen hormonelle Folgestoerungen eine bedeutende Rolle. Methode: Eigene Erfahrungen und Literaturrecherche. Ergebnisse

  9. Lassen Veränderungen des Prostata-spezifischen Antigen- (PSA- Spiegels nach Prostatastanzbiopsie Rückschlüsse auf das pathologische Ergebnis zu?

    Directory of Open Access Journals (Sweden)

    Volkmer BG

    2004-01-01

    Full Text Available Einleitung: Die diagnostische Biopsie der Prostata führt bekanntermaßen zum Anstieg des Serum-PSA-Spiegels. Diese prospektive Untersuchung sollte die Frage klären, ob die Änderungen des Serum-PSA-Spiegels nach Stanzbiopsie Rückschlüsse auf das histologische Ergebnis zulassen und so als Entscheidungshilfe bei der Frage der Rebiopsie dienen können. Patienten und Methoden: Insgesamt 79 konsekutive Patienten mit klinischem Verdacht auf das Vorliegen eines Prostatakarzinoms (PCA und einem Gesamt-PSA 50 ng/ml wurden in die Studie eingeschlossen. Ausschlußkriterien waren klinische Hinweise für eine Prostatitis und Prostatabiopsie innerhalb der letzten 3 Monate. Die Serum-PSA-Werte wurden mit einem ultrasensitiven Enzymimmunoassay bestimmt. Die Bestimmung des Gesamt-PSA und des freien PSA im Serum erfolgte unmittelbar vor und 60 Minuten nach der Biopsie. Die Spiegel des Gesamt-PSA und freien PSA, sowie die f/t-PSA-Ratio vor und nach Biopsie wurden in Korrelation zum histologischen Ergebnis gesetzt. Ergebnisse: 86 Biopsieserien wurden bei 79 Patienten durchgeführt. 38 Biopsieserien diagnostizierten ein PCA, 48 eine benigne Prostatahyperplasie (BPH. Die abschließende Histologie nach wiederholter Biopsie war PCA und BPH in je 43 Fällen. Insgesamt fand sich ein Anstieg des durchschnittlichen Gesamt-PSA von 18,39 ng/ml auf 107,8 ng/ml, des durchschnittlichen freien PSA von 3,43 ng/ml auf 33,7 ng/ml und der durchschnittlichen f/t PSA-Ratio von 18,1 % auf 52,0 %. Es fand sich keine Korrelation zwischen dem Anstieg dieser Parameter und der Anzahl der Biopsiezylinder (4–51. Bezüglich des histologischen Befundes ergaben sich statistisch signifikante Unterschiede für das Gesamt-PSA vor und die f/t PSA-Ratio vor und nach Stanzbiopsie. Schlußfolgerung: Die Analyse der PSA-Parameter nach Stanzbiopsie bietet keine zusätzliche Information über die konventionellen PSA-Parameter vor der Biopsie hinaus. Sie korrelieren vor allem nicht mit falsch

  10. Die Reichweite der Haftungsprivilegien nach dem SGB VII außerhalb des klassischen Arbeitsunfalls / Tobias Matz ; Claudia Baumann

    Index Scriptorium Estoniae

    Matz, Tobias

    2016-01-01

    Ettevõtte ja kollektiivi vastutusest sotsiaalseadustiku § 104 jj tähenduses ebatraditsiooniliste tööõnnetuste korral (nt koolides õpilaste/õpetajate vigastused; praktikandid kutseõppes; loomade tekitatud vigastused jms)

  11. Basics about online boiler cleaning according to the Schwandorf principle; Grundlagen zur Online-Kesselreinigung nach dem Schwandorfer Prinzip

    Energy Technology Data Exchange (ETDEWEB)

    Krueger, Joerg [VWT Ing.-Buero, Schwandorf (Germany); Krueger, Sascha [IBK-Verfahrenstechnik, Bad Berka (Germany)

    2013-10-01

    In the Schwandorf waste-to-energy (WtE) plant more than ten years ago a wet online boiler cleaning system was developed which has the capability to clean the radiation passes of (WtE-, biomass- and refuse derived fuel (RDF)) boilers without damaging the boiler. During the development it was recognised that the method of atomising the washing agent (water) is highly influencing the effectiveness of cleaning by securing parts of the boiler (membrane walls). (orig.)

  12. Neutrino oscillations with the OPERA experiment

    CERN Document Server

    Galati, Giuliana

    2016-01-01

    OPERA (Oscillation Project with Emulsion tRacking Apparatus) was a long-baseline experiment at the Gran Sasso laboratory (LNGS) designed to search for ν μ → ν τ oscillations in appearance mode. OPERA took data from 2008 to 2012 with the CNGS neutrino beam from CERN. The observation of five ν τ candidates allowed assessing the discovery of ν μ → ν τ appearance in the CNGS neutrino beam with a significance of 5 . 1 σ . The data analysis is still ongoing, with the goal of improving the sensitivity to the sterile neutrino search in the ν μ → ν τ and ν μ → ν e appearance channels and oscillation parameters with reduced statistical uncertainties. Current results will be presented and perspectives discussed.

  13. Radiotherapy in early stage dupuytren's contracture; Die Radiotherapie des Morbus Dupuytren im Fruehstadium. Langzeitresultate nach einer medianen Nachbeobachtungszeit von 10 Jahren

    Energy Technology Data Exchange (ETDEWEB)

    Adamietz, B.; Sauer, R. [Erlangen-Nuernberg Univ., Erlangen (Germany). Klinik und Poliklinik fuer Strahlentherapie; Keilholz, L. [Erlangen-Nuernberg Univ., Erlangen (Germany). Klinik und Poliklinik fuer Strahlentherapie; Praxis fuer Strahlentherapie, Klinikum Fuerth (Germany); Gruenert, J. [Abt. fuer Plastische und Handchirurgie der Chirurgischen Universitaetsklinik Erlangen-Nuernberg, Erlangen (Germany)

    2001-11-01

    Purpose: In early stage Dupuytren's contracture radiotherapy was applied to prevent disease progression. Long-term results and late toxicity of this treatment were evaluated in a retrospective analysis. Patients and Methods: Between 1982 and 1994, 99 patients (176 hands) received orthovoltage radiotherapy, which consisted of two courses with 5 x 3 Gy (total dose: 30 Gy, daily fractionated; 120 kV, 4 mm Al), separated by a 6 to 8-week pause. The Dupuytren's contracture was staged according to the classification of Tubiana et al. The long-term outcome was analyzed at last follow-up between July and November 1999. The median follow-up was 10 years (range 7-18 years). Late toxicity was assessed using the LENT-SOMA criteria. Results: In Stage N 84% and Stage N/I 67% of cases remained stable. 65% of the cases in Stage I and 83% in Stage II showed progressive nodules and cords. In case of progression we saw no complications after a second radiotherapy or salvage operation. Conclusion: Radiotherapy effectively prevents disease progression for early stage Dupuytren's contracture (Stage N, N/I). Moreover, in case of disease progression despite radiotherapy salvage surgery is still feasible. (orig.) [German] Hintergrund: Im Fruehstadium des Morbus Dupuytren wird die externe Radiotherapie mit dem Ziel eingesetzt, den progressiven Verlauf der Erkrankung zu verhindern. Eine aktuelle Langzeitverlaufskontrolle soll die Ergebnisse und Nebenwirkungen der Radiotherapie darstellen. Patienten und Methode: Wir untersuchten 99 Patienten (176 Haende), welche sich von 1982-1994 einer Radiotherapie an unserer Klinik unterzogen. Jeder Patient erhielt zwei Serien einer Radiotherapie mit jeweils 5 x 3 Gy (Gesamtdosis 30 Gy, 120 kV, 4 mm Al, Bestrahlungspause von 6-8 Wochen nach 15 Gy). Die Beugekontraktur wurde nach Tubiana et al. eingeteilt. Von Juli bis November 1999 erfolgte nach einer medianen Nachbeobachtungszeit von 10 Jahren (7-18 Jahre) eine Kontrolluntersuchung. Die

  14. Quantenphysik und Kommunikationswissenschaft auf dem Weg zu einer allgemeinen Theorie der Kommunikation

    CERN Document Server

    Hamberger, Erich

    2015-01-01

    Der Quantenphysiker Herbert Pietschmann beschäftigt sich seit Jahrzehnten mit dem Phänomen Kommunikation. Der Kommunikationswissenschaftler Erich Hamberger setzt sich seit langem mit der Frage der Adaptierung erkenntnistheoretischer Einsichten der Quantentheorie für die Geistes- und Biowissenschaften auseinander. 2003 begegnen sich die beiden - und staunen über die „verschränkten Erkenntnisinteressen“. 2006 bestreiten sie eine erste gemeinsame universitäre Lehrveranstaltung. 2011 folgt Das Phänomen Kommunikation transdisziplinär betrachtet. Aus ihrer Zusammenarbeit ist dieses Buch entstanden. Naturwissenschaft arbeitet auf der Grundlage des mechanistischen Denkrahmens. Die bisher einzige Ausnahme ist die Quantenphysik. Weder Leben noch Kommunikation ist mittels des mechanistischen Denkrahmens zu verstehen. Auch der Denkrahmen der Quantenphysik reicht dazu nicht aus. Der Bedarf nach adäquatem Denken im Bereich der Kommunikation kann durch quantenphysikalisches Denken NICHT befriedigt werden, jedoc...

  15. Zur Rekonstruktion einer Typologie jugendlichen Medienhandelns gemäß dem Leitbild der Triangulation

    Directory of Open Access Journals (Sweden)

    Klaus Peter Treumann

    2017-09-01

    Full Text Available Die im Folgenden dargestellten Ergebnisse sind im Rahmen des von der DFG geförderten Forschungsprojekts „Eine Untersuchung zum Mediennutzungsverhalten 12- bis 20-Jähriger und zur Entwicklung von Medienkompetenz im Jugendalter“ entstanden, das gemeinsam von Klaus Peter Treumann, Uwe Sander und Dorothee Meister geleitet wird. Das Forschungsprojekt untersucht das Medienhandeln Jugendlicher sowohl hinsichtlich Neuer als auch alter Medien. Zum einen fragen wir dabei nach den Ausprägungen von Medienkompetenz in verschiedenen Dimensionen und zum anderen konzentrieren wir uns auf die Entwicklung einer empirisch fundierten Typologie jugendlichen Medienhandelns. Methodologisch ist die Untersuchung an dem Leitbild der Triangulation orientiert und kombiniert qualitative und quantitative Zugänge zum Forschungsfeld in Form von Gruppendiskussionen, leitfadengestützten Einzelinterviews und einer Repräsentativerhebung.

  16. Automated Quality Control for Ortholmages and DEMs

    DEFF Research Database (Denmark)

    Höhle, Joachim; Potucková, Marketa

    2005-01-01

    The checking of geometric accurancy of orthoimages and digital elevation models (DEMs) is discussed. As a reference, an existing orthoimage and a second orthoimage derived from an overlapping aerial image, are used. The proposed automated procedures for checking the orthoimages and DEMs are based...

  17. Person, Profil, Privatheit. Die Suche nach Eigennamen als informationsethisches Problem

    OpenAIRE

    Bordat, Josef

    2005-01-01

    Zusammenfassung: Der Schutz der Privatsphäre im Rahmen der Nutzung von Internet-Suchmaschinen wird auf der Ebene der privacy als Recht auf wirksamen Schutz seiner Daten und der Privatheit als Recht des "Für-Sich-Seins", auf "solitude, anonymity and intimacy" sowie auf "control of personal information" untersucht. Gerade letztere gerät im Zusammenhang mit der Suche nach Eigennamen in Gefahr, da im Ergebnis über persönliche Daten verfügt wird, ohne das die betreffende Person weiß, wer zu wel...

  18. ArcticDEM Validation and Accuracy Assessment

    Science.gov (United States)

    Candela, S. G.; Howat, I.; Noh, M. J.; Porter, C. C.; Morin, P. J.

    2017-12-01

    ArcticDEM comprises a growing inventory Digital Elevation Models (DEMs) covering all land above 60°N. As of August, 2017, ArcticDEM had openly released 2-m resolution, individual DEM covering over 51 million km2, which includes areas of repeat coverage for change detection, as well as over 15 million km2 of 5-m resolution seamless mosaics. By the end of the project, over 80 million km2 of 2-m DEMs will be produced, averaging four repeats of the 20 million km2 Arctic landmass. ArcticDEM is produced from sub-meter resolution, stereoscopic imagery using open source software (SETSM) on the NCSA Blue Waters supercomputer. These DEMs have known biases of several meters due to errors in the sensor models generated from satellite positioning. These systematic errors are removed through three-dimensional registration to high-precision Lidar or other control datasets. ArcticDEM is registered to seasonally-subsetted ICESat elevations due its global coverage and high report accuracy ( 10 cm). The vertical accuracy of ArcticDEM is then obtained from the statistics of the fit to the ICESat point cloud, which averages -0.01 m ± 0.07 m. ICESat, however, has a relatively coarse measurement footprint ( 70 m) which may impact the precision of the registration. Further, the ICESat data predates the ArcticDEM imagery by a decade, so that temporal changes in the surface may also impact the registration. Finally, biases may exist between different the different sensors in the ArcticDEM constellation. Here we assess the accuracy of ArcticDEM and the ICESat registration through comparison to multiple high-resolution airborne lidar datasets that were acquired within one year of the imagery used in ArcticDEM. We find the ICESat dataset is performing as anticipated, introducing no systematic bias during the coregistration process, and reducing vertical errors to within the uncertainty of the airborne Lidars. Preliminary sensor comparisons show no significant difference post coregistration

  19. Estimating Coastal Digital Elevation Model (DEM) Uncertainty

    Science.gov (United States)

    Amante, C.; Mesick, S.

    2017-12-01

    Integrated bathymetric-topographic digital elevation models (DEMs) are representations of the Earth's solid surface and are fundamental to the modeling of coastal processes, including tsunami, storm surge, and sea-level rise inundation. Deviations in elevation values from the actual seabed or land surface constitute errors in DEMs, which originate from numerous sources, including: (i) the source elevation measurements (e.g., multibeam sonar, lidar), (ii) the interpolative gridding technique (e.g., spline, kriging) used to estimate elevations in areas unconstrained by source measurements, and (iii) the datum transformation used to convert bathymetric and topographic data to common vertical reference systems. The magnitude and spatial distribution of the errors from these sources are typically unknown, and the lack of knowledge regarding these errors represents the vertical uncertainty in the DEM. The National Oceanic and Atmospheric Administration (NOAA) National Centers for Environmental Information (NCEI) has developed DEMs for more than 200 coastal communities. This study presents a methodology developed at NOAA NCEI to derive accompanying uncertainty surfaces that estimate DEM errors at the individual cell-level. The development of high-resolution (1/9th arc-second), integrated bathymetric-topographic DEMs along the southwest coast of Florida serves as the case study for deriving uncertainty surfaces. The estimated uncertainty can then be propagated into the modeling of coastal processes that utilize DEMs. Incorporating the uncertainty produces more reliable modeling results, and in turn, better-informed coastal management decisions.

  20. 76 FR 30060 - Proposed Establishment of the Naches Heights Viticultural Area (2009R-107P)

    Science.gov (United States)

    2011-05-24

    ... acres of wine grape producing vines. Name Evidence The ``Naches Heights'' name applies to an elevated... carved much of the basin geography within the Columbia Valley AVA. The proposed Naches Heights.... Distinguishing Features The petition states that geology, geography, and soils distinguish the proposed...

  1. Urban DEM generation, analysis and enhancements using TanDEM-X

    Science.gov (United States)

    Rossi, Cristian; Gernhardt, Stefan

    2013-11-01

    This paper analyzes the potential of the TanDEM-X mission for the generation of urban Digital Elevation Models (DEMs). The high resolution of the sensors and the absence of temporal decorrelation are exploited. The interferometric chain and the problems encountered for correct mapping of urban areas are analyzed first. The operational Integrated TanDEM-X Processor (ITP) algorithms are taken as reference. The ITP main product is called the raw DEM. Whereas the ITP coregistration stage is demonstrated to be robust enough, large improvements in the raw DEM such as fewer percentages of phase unwrapping errors, can be obtained by using adaptive fringe filters instead of the conventional ones in the interferogram generation stage. The shape of the raw DEM in the layover area is also shown and determined to be regular for buildings with vertical walls. Generally, in the presence of layover, the raw DEM exhibits a height ramp, resulting in a height underestimation for the affected structure. Examples provided confirm the theoretical background. The focus is centered on high resolution DEMs produced using spotlight acquisitions. In particular, a raw DEM over Berlin (Germany) with a 2.5 m raster is generated and validated. For this purpose, ITP is modified in its interferogram generation stage by adopting the Intensity Driven Adaptive Neighbourhood (IDAN) algorithm. The height Root Mean Square Error (RMSE) between the raw DEM and a reference is about 8 m for the two classes defining the urban DEM: structures and non-structures. The result can be further improved for the structure class using a DEM generated with Persistent Scatterer Interferometry. A DEM fusion is thus proposed and a drop of about 20% in the RMSE is reported.

  2. 2014 USACE NCMP Topobathy Lidar DEM: Oregon

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — These Digital Elevation Model (DEM) files contain rasterized topobathy lidar elevations at a 1 m grid size, generated from data collected by the Coastal Zone Mapping...

  3. 2016 USGS Lidar DEM: Maine QL2

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Product: These are Digital Elevation Model (DEM) data for Franklin, Oxford, Piscataquis, and Somerset Counties, Maine as part of the required deliverables for the...

  4. Eine Analyse des Zusammenhangs zwischen dem Konsum von Alkopops und dem Problemverhalten von Jugendlichen

    OpenAIRE

    Metzner, Cornelia Beate Isabel

    2007-01-01

    Zielsetzung: In dieser Arbeit wird untersucht, ob bei Jugendlichen ein Zusammenhang zwischen dem Konsum von Alkopops einerseits und dem sonstigen Alkoholtrinkverhalten, dem Konsum von Zigaretten und illegalen Drogen sowie weiteren Risikoverhaltensweisen andererseits besteht, ferner ob sich Unterschiede im Verhalten von Jungen und Mädchen ergeben. Theoretischer und empirischer Hintergrund: �Alkopops�, d. h. Mischgetränke diverser Hersteller aus Likör bzw. Schnaps und Limonade sowie wein- ...

  5. Landbrugets trædemølle

    DEFF Research Database (Denmark)

    Hansen, Henning Otte

    2016-01-01

    Teorien om landbrugets trædemølle siger, at teknologi medfører stigende produktivitet, stigende udbud og dermed faldende priser. Dermed øges behovet for ny teknologi. Det vedvarende teknologipres gavner de innovative landmænd, mens de mere afventende landmænd kun oplever de negative virkninger i...... form af prisfald. I denne artikel beskrives nærmere de enkelte elementer i trædemøllen. Samtidig vurderes trædemøllens betydning og mulige påvirkning. Det konkluderes, at trædemøllen, dens forudsætninger og afledte virkninger stadig er fuldt gældende. Det er ikke muligt for et enkelt land eller region...... af bremse trædemøllen på lang sigt. På lokalt plan kan man løse nogle sociale og økonomiske problemer skabt af trædemøllen gennem nemmere afvandring....

  6. Modification of the method of Figgie for determination of joint line shifting in total knee arthroplasty; Modifizierung der Messmethode nach Figgie zur Bestimmung der Gelenklinienverschiebung in der Knieendoprothetik

    Energy Technology Data Exchange (ETDEWEB)

    Classen, T.; Wegner, A.; Knoch, M. von [Universitaet Duisburg-Essen, Klinik fuer Orthopaedie, Essen (Germany)

    2009-06-15

    unterschiedlichen Roentgenbildern schwierig macht. Wir entwickelten daher einen Quotient JL/P (JL Distanz der Tibiagelenklinie zur Tuberositas tibiae, P Distanz der Patellaspitze zur Tibiagelenklinie) zur besseren Vergleichbarkeit. Des Weiteren modifizierten wir diesen Quotient JL/P, indem statt der Tibiagelenklinie eine Tangente an die Femurkondyle als Referenzlinie genutzt wurde. Damit konnten Probleme wie unterschiedlich hohe Polyethylen-Inlays, die mit den Messwerten verrechnet werden muessen, der Slope der tibialen Komponente oder die schlechte Beurteilbarkeit der Tibiagelenkflaeche bei arthrotischen Kniegelenken ausgeschlossen werden. Die Messwerte zeigen fuer den Quotient JL/P eine massive Verschiebung der Gelenklinie nach kranial, was in dem Umfang nicht realistisch erscheint. Die modifizierte Messmethode zeigt ebenfalls eine Kranialisation der Gelenklinie, jedoch in realistischem Umfang. Beide Messmethoden zeigen eine gute Untersucherunabhaengigkeit. Insbesondere die modifizierte Methode JL/P scheint eine gute Methode zur Bestimmung der tibiofemoralen Gelenklinienverschiebung nach einer Knieendoprothese zu sein. (orig.)

  7. Long-term results after fibroid embolization; Langzeitergebnisse nach Myomembolisation

    Energy Technology Data Exchange (ETDEWEB)

    Mueller-Huelsbeck, S. [Medizinischer Klinikverbund Flensburg, Akademisches Lehrkrankenhaus des Universitaetsklinikums Schleswig-Holstein, Abt. Diagnostische und interventionelle Radiologie/Neuroradiologie, Ev.-Luth. Diakonissenanstalt zu Flensburg, Flensburg (Germany)

    2008-07-15

    Fibroids (leiomyoma) are the most frequent benign tumors of the uterus during female reproductive age. In the case of clinical symptoms, uterine artery embolization (UAE) is a well established treatment option for symptomatic fibroids, resulting in promising long-term results. In order to estimate long-term success after UAE, reduction of fibroids and uterus volume is less important than complete improvement and disappearance of fibroid-related symptoms. In addition to a high technical success rate and a low perioperative complication rate, UAE results in high short-term and long-term patient satisfaction (>87%) and improvement of symptoms (>81%). Candidates for UAE should be informed about potential reinterventions in terms of repeated UAE (up to 18% of cases) or surgical treatment options. (orig.) [German] Myome sind die haeufigsten gutartigen soliden Tumoren des weiblichen Genitaltrakts im reproduktiven Alter. Bei klinischen Beschwerden stellt die Uterusarterienembolisation (UAE) zur Therapie des symptomatischen Uterus myomatosus einen fest etabliertes Verfahren dar, das mit viel versprechenden Langzeitergebnissen aufwarten kann. Im Vordergrund der Abschaetzung eines lang andauernden Therapieerfolgs nach UAE stehen weniger die Volumenreduktion eines dominanten Myoms bzw. des gesamten Uterus nach der Behandlung, sondern vielmehr die Besserung oder das voellige Verschwinden der von der Patientin initial vor der UAE angegebenen (myombedingten) Beschwerden. Neben einer hohen technischen Erfolgsrate und geringen perioperativen Komplikationsrate fuehrt die fachkundig durchgefuehrte UAE sowohl im Kurz- als auch Langzeitverlauf zu einem hohen Mass an Patientenzufriedenheit (>87%), verbunden mit einer deutlichen Symptombesserung (>81%). Ueber eine Reintervention (in bis zu ca. 18% der Faelle) im Sinne einer erneuten UAE oder einer operativen Massnahme sollten die Patientinnen allerdings im Vorfeld aufgeklaert werden. (orig.)

  8. Beijing Bubble, Beijing Bust: Inequality, Trade, and Capital Inflow into China Beijing Blase, Beijing Krise: Ungleichheit, Handel und Kapitalzufluss nach China

    Directory of Open Access Journals (Sweden)

    James K. Galbraith

    2009-07-01

    Full Text Available This paper explores the relationships between inequality, trade, and capital flows into China since the early 1990s and particularly in the first years of the present decade. We show that the rise in economic inequality in China has more to do directly with the activities associated with China’s financial and building boom, notably in Beijing, than with the massive growth in manufacturing employment and in Chinese exports since China joined the WTO in 2001. Nevertheless, it is likely that a flow of profits from the export boom did feed the speculative fires in the capital and elsewhere, and therefore it should be no surprise that the fall of one should be linked to the fall of the other, in a particularly painful reduction of economic inequality. In diesem Artikel werden die Beziehungen zwischen Ungleichheit, Handel und Kapitalzufluss nach China seit den frühen 1990er Jahren untersucht. Es wird aufgezeigt, dass die steigende wirtschaftliche Ungleichheit in China weit mehr mit Chinas Finanz- und Bauboom insbesondere in Beijing zu tun hat als mit dem großen Anstieg der Beschäftigung in der Produktion und in Chinas Exporten seit dem WTO-Beitritt im Jahr 2001.

  9. Large Scale Landform Mapping Using Lidar DEM

    Directory of Open Access Journals (Sweden)

    Türkay Gökgöz

    2015-08-01

    Full Text Available In this study, LIDAR DEM data was used to obtain a primary landform map in accordance with a well-known methodology. This primary landform map was generalized using the Focal Statistics tool (Majority, considering the minimum area condition in cartographic generalization in order to obtain landform maps at 1:1000 and 1:5000 scales. Both the primary and the generalized landform maps were verified visually with hillshaded DEM and an orthophoto. As a result, these maps provide satisfactory visuals of the landforms. In order to show the effect of generalization, the area of each landform in both the primary and the generalized maps was computed. Consequently, landform maps at large scales could be obtained with the proposed methodology, including generalization using LIDAR DEM.

  10. "Das unausgesprochene Gefühl der Unzugehörigkeit" : Amerika als Zufluchtsmöglichkeit vor dem Selbst in Max Frischs Romanen Stiller und Homo faber

    Directory of Open Access Journals (Sweden)

    Vesna Kondrič Horvat

    1993-12-01

    Full Text Available In seiner Rede Emigranten, die er 1958 anläßlich der Georg-BtichnerPreis- Verleihung hielt und woraus das Titelzitat des vorliegenden Beitrags stammt, äußerte Max Frisch die Meinung, jeder frei gewahlte Wohnsitz solle dem Schriftsteller das unausgesprochene Gefühl der Unzugehörigkeit gestatten. Mit dem Satz: "Ich bin nicht Stiller!" (St 9 beginnt Frisch seinen 1954 veröffentlichten Roman Stiller. Ein Mann - ein Bildhauer -, der viele Versuche unternommen hat, seiner 'eigentlichen ', seelisch-existentiellen Identität zu entgehen, flieht schlieBlich, als alle anderen Versuche (sich im Spanischen Bürgerkrieg als ein mutiger Mann, sich in der Ehe als ein idealer Mann, sich in der Kunst als erfolgreicher Bildhauer zu bewahren scheitern, nach Amerika und läßt seine lungenkranke Frau Julika im Sanatorium in Davos zurück. Nach mehr als sechsjahrigem Fernbleiben kehrt er unter anderem Namen in die Heimat zurück und wird an der Schweizer Grenze - wegen vermeintlicher Verwicklung in eine Spionage-Affäre - verhaftet. An diesem Punkt beginnt der Roman.

  11. Signale ohne Antwort? Die Suche nach außerirdischem Leben.

    Science.gov (United States)

    Davoust, E.

    This book is a German translation, by M. Röser, of the English version "The cosmic water hole", published in 1991 (see 53.003.080). The original French edition "Silence au point d'eau" was published in 1988 (see 45.003.059). Contents: I. Leben auf der Erde. 1. Kometen und der Ursprung des Lebens. 2. Die zeitliche Dimension des Lebens. 3. Evolution und Katastrophen. 4. Liegt unsere Zukunft im Weltall? II. Leben im Universum. 5. Die Suche nach Leben in der Sonnenumgebung. 6. Die Suche nach Planetensystemen. III. Intelligentes Leben im Universum. 7. Demographie außerirdischer Zivilisationen. 8. Soziologie außerirdischer Zivilisationen. 9. UFO's und Besuche in der Vergangenheit. 10. Strategien bei der Suche nach außerirdischen Zivilisationen. 11. Die Suche nach künstlichen Signalen. 12. Die Diskussion innerhalb der Gesellschaft. 13. Die Stellung des Menschen im Universum.

  12. Zwischenberichterstattung nach Börsenrecht, DRS, IAS und US-GAAP

    OpenAIRE

    Alvarez von Zerboni di Sposetti, Manuel

    2003-01-01

    Zwischenberichterstattung nach Börsenrecht, DRS, IAS und US-GAAP / von Manuel Alvarez und Stefan Wotschofsky. - 2., neubearb. und erw. Aufl. - Berlin : Erich Schmidt, 2003. - XX, 219 S. [1. Aufl. 2000

  13. 2012 Puget Sound LiDAR Consortium (PSLC) Topographic LiDAR: Upper Naches River, Washington

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Watershed Sciences, Inc. (WSI) collected Light Detection and Ranging (LiDAR) data of the Upper Naches River Valley and Nile Slide area of interest on September 30th,...

  14. Interkulturelle kommunikative Kompetenz – ein Versuch der Operationalisierung aus dem Fach Deutsch an der dänischen Lehrerausbildung

    DEFF Research Database (Denmark)

    Bjerre, Kirsten; Daryai-Hansen, Petra

    2017-01-01

    Mit diesem Artikel versuchen wir, den Begriff 'interkulturelle kommunikative Kompetenz‘ theoretisch zu entwickeln. Wir gehen zunächst der Frage nach, warum im Fach Deutsch als Fremdsprache mit interkultureller kommunikativer Kompetenz gearbeitet werden sollte und welche Herausforderungen sich...... hierbei stellen. Im Anschluss präsentieren wir unser Modell der interkulturellen kommunikativen Kompetenz, das wir für das Fach Deutsch ain der dänischen Lehrerausbildung auf der Grundlage eines Modells von Michael Byram aus dem Jahre 1997 entwickelt haben. Byrams Modell der interkulturellen...... zunächst die Begriffe ‚Kompetenz‘, ‚Kultur‘, ‚kommunikative Kompetenz‘ und ‚interkulturelle Kompetenz‘. Wir konkretisieren die Dimensionen des Modells im Anschluss anhand eines Unterrichtsbeispiels für das Fach Deutsch an der dänischen Einheitsschule („Folkeskole“). Abschließend skizzieren wir, wie unser...

  15. S1-Leitlinie Lipödem.

    Science.gov (United States)

    Reich-Schupke, Stefanie; Schmeller, Wilfried; Brauer, Wolfgang Justus; Cornely, Manuel E; Faerber, Gabriele; Ludwig, Malte; Lulay, Gerd; Miller, Anya; Rapprich, Stefan; Richter, Dirk Frank; Schacht, Vivien; Schrader, Klaus; Stücker, Markus; Ure, Christian

    2017-07-01

    Die vorliegende überarbeitete Leitlinie zum Lipödem wurde unter der Federführung der Deutschen Gesellschaft für Phlebologie (DGP) erstellt und finanziert. Die Inhalte beruhen auf einer systematischen Literaturrecherche und dem Konsens von acht medizinischen Fachgesellschaften und Berufsverbänden. Die Leitlinie beinhaltet Empfehlungen zu Diagnostik und Therapie des Lipödems. Die Diagnose ist dabei auf der Basis von Anamnese und klinischem Befund zu stellen. Charakteristisch ist eine umschriebene, symmetrisch lokalisierte Vermehrung des Unterhautfettgewebes an den Extremitäten mit deutlicher Disproportion zum Stamm. Zusätzlich finden sich Ödeme, Hämatomneigung und eine gesteigerte Schmerzhaftigkeit der betroffenen Körperabschnitte. Weitere apparative Untersuchungen sind bisher besonderen Fragestellungen vorbehalten. Die Erkrankung ist chronisch progredient mit individuell unterschiedlichem und nicht vorhersehbarem Verlauf. Die Therapie besteht aus vier Säulen, die individuell kombiniert und an das aktuelle Beschwerdebild angepasst werden sollten: komplexe physikalische Entstauungstherapie (manuelle Lymphdrainage, Kompressionstherapie, Bewegungstherapie, Hautpflege), Liposuktion und plastisch-chirurgische Interventionen, Ernährung und körperliche Aktivität sowie ggf. additive Psychotherapie. Operative Maßnahmen sind insbesondere dann angezeigt, wenn trotz konsequent durchgeführter konservativer Therapie noch Beschwerden bestehen bzw. eine Progredienz des Befundes und/oder der Beschwerden auftritt. Eine begleitend zum Lipödem bestehende morbide Adipositas sollte vor einer Liposuktion therapeutisch angegangen werden. © 2017 The Authors | Journal compilation © Blackwell Verlag GmbH, Berlin.

  16. ASTER Orthorectified Digital Elevation Model (DEM) V003

    Data.gov (United States)

    National Aeronautics and Space Administration — The ASTER L3 DEM and Orthorectified Images form a multi-file product that contains both the Digital Elevation Model (DEM), and the Orthorectified Image products....

  17. Thyroid volume reduction following radioiodine therapy in patients with autonomous goitre and Graves` disease; Volumenreduktion der Schilddruese nach Radiojodtherapie bei Patienten mit Schilddruesenautonomie und Morbus Basedow

    Energy Technology Data Exchange (ETDEWEB)

    Dederichs, B. [Klinik und Poliklinik fuer Nuklearmedizin, Univ. Koeln (Germany); Otte, R. [Klinik und Poliklinik fuer Nuklearmedizin, Univ. Koeln (Germany); Klink, J.E. [Klinik und Poliklinik fuer Nuklearmedizin, Univ. Koeln (Germany); Schicha, H. [Klinik und Poliklinik fuer Nuklearmedizin, Univ. Koeln (Germany)

    1996-10-01

    Wochen bis 3 Monate nach RJTh nachweisbar. Schlussfolgerung: Diese Beobachtungen legen den Schluss nahe, dass die thyreoidale Grunderkrankung den therapeutischen Effekt der RJTh beeinflusst. Dies koennte teilweise durch die vollstaendige Suppression des nichtautonomen Gewebes waehrend der RJTh erklaert werden. Fuer die Patienten mit UFA, die im Vergleich zu Patienten mit MFA eine ca. 1,7fach hoehere Herddosis erhalten hatten, fiel die SVR um den Faktor 1,6 staerker aus. Dies belegt einen direkten Zusammenhang zwischen der effektiven Herddosis und dem Ausmass der SVR nach RJTh. (orig.)

  18. The role of DEM at CERN

    CERN Document Server

    Van der Bij, E

    2005-01-01

    The DEM group in the Technical Support department provides services for the fabrication of special printed circuits that are invaluable for the whole particle physics community. The capability is based around a core technology that is developed by using skills to etch and process materials that are not commonly used in industry, combined with production methods used in PCB manufacturing. The role of the prototyping facilities is to assist engineers and physicists and to offer them easy access to competencies often not available from industry. At the same time, with the expertise and production capacity available, it makes that CERN is always geared up to handle emergency situations. The design office and the assembly workshop that are also part of DEM have similar roles that lower the cost and improve the quality and maintainability of electronics developed at CERN.

  19. Volcanic geomorphology using TanDEM-X

    Science.gov (United States)

    Poland, Michael; Kubanek, Julia

    2016-04-01

    Topography is perhaps the most fundamental dataset for any volcano, yet is surprisingly difficult to collect, especially during the course of an eruption. For example, photogrammetry and lidar are time-intensive and often expensive, and they cannot be employed when the surface is obscured by clouds. Ground-based surveys can operate in poor weather but have poor spatial resolution and may expose personnel to hazardous conditions. Repeat passes of synthetic aperture radar (SAR) data provide excellent spatial resolution, but topography in areas of surface change (from vegetation swaying in the wind to physical changes in the landscape) between radar passes cannot be imaged. The German Space Agency's TanDEM-X satellite system, however, solves this issue by simultaneously acquiring SAR data of the surface using a pair of orbiting satellites, thereby removing temporal change as a complicating factor in SAR-based topographic mapping. TanDEM-X measurements have demonstrated exceptional value in mapping the topography of volcanic environments in as-yet limited applications. The data provide excellent resolution (down to ~3-m pixel size) and are useful for updating topographic data at volcanoes where surface change has occurred since the most recent topographic dataset was collected. Such data can be used for applications ranging from correcting radar interferograms for topography, to modeling flow pathways in support of hazards mitigation. The most valuable contributions, however, relate to calculating volume changes related to eruptive activity. For example, limited datasets have provided critical measurements of lava dome growth and collapse at volcanoes including Merapi (Indonesia), Colima (Mexico), and Soufriere Hills (Montserrat), and of basaltic lava flow emplacement at Tolbachik (Kamchatka), Etna (Italy), and Kīlauea (Hawai`i). With topographic data spanning an eruption, it is possible to calculate eruption rates - information that might not otherwise be available

  20. Global CO{sub 2} emissions 2015. Trend reversion is still waiting, despite hopeful approaches; Weltweite CO{sub 2}-Emissionen 2015. Trendwende laesst trotz hoffnungsvoller Ansaetze nach wie vor auf sich warten

    Energy Technology Data Exchange (ETDEWEB)

    Ziesing, Hans-Joachim

    2016-10-15

    By 2015, global CO{sub 2} emissions were virtually unchanged from 2014 according to provisional calculations. On the whole, a slight increase may have resulted, which has slowed the growth of the past few years. In the previous year alone, the weakest growth since the beginning of the century had been recorded, with only 0.7% of the upturn (with the exception of the crises in 2008/2009). As a result, CO{sub 2} emissions in 2015 were only slightly higher than in the previous year, at 33.1 billion tonnes. A global trend reversal is still likely, but the CO{sub 2} emissions have declined in many countries, particularly in some industrialized countries. [German] Im Jahr 2015 haben sich die weltweiten CO{sub 2}-Emissionen nach vorlaeufigen Berechnungen gegenueber 2014 praktisch nicht veraendert. Insgesamt duerfte sich allenfalls ein leichtes Plus ergeben haben, womit der Zuwachs der vergangenen Jahre erneut gebremst wurde. Schon im Vorjahr war mit einem Plus von nur 0,7 % der bis dahin (mit Ausnahme der Krisenjahre 2008/2009) schwaechste Anstieg seit Beginn des Jahrhunderts zu verzeichnen gewesen. Im Ergebnis blieben die CO{sub 2}-Emissionen 2015 mit reichlich 33,1 Mrd. t nur geringfuegig ueber dem Niveau des Vorjahres. Eine weltweite Trendwende steht wohl noch nach wie vor aus, doch sind immerhin die CO{sub 2}-Emissionen in zahlreichen Laendern, insbesondere in etlichen Industrielaendern, gesunken.

  1. The premature possession briefing according to paragraph 44b EnWG. The legal situation according to the infrastructure planning acceleration law; Die vorzeitige Besitzeinweisung nach paragraph 44b EnWG. Die Rechtslage nach dem Infrastrukturplanungs-Beschleunigungsgesetz

    Energy Technology Data Exchange (ETDEWEB)

    Riedel, D. [Kanzlei Dombert Rechtsanwaelte, Potsdam (Germany)

    2008-03-15

    On 17th December 2006, the infrastructure planning acceleration law comes into force. This law plans to tighten the realization of urgent infrastructure projects. Above all, this concerns to changes, which follow from this law for the right of the expropriation. Under this aspect, the author of the contribution under consideration reports on the objective of the infrastructure planning acceleration law as well as on the conditions and factual characteristics of the possession briefing. The straight premature possession briefing represents a good starting point to clearly shorten the time of the filing of an application in the planning procedure up to the actual commencement of construction. The legislative fundament for this is existent.

  2. Quantenfische die Stringtheorie und die Suche nach Weltformel

    CERN Document Server

    Lüst, Dieter

    2011-01-01

    Lässt sich das Verhalten aller Dinge, von den kleinsten Teilchen bis zum Universum, einheitlich beschreiben? Der heißeste Kandidat für die Entwicklung einer Weltformel, die alle physikalischen Phänomene erklären kann, ist die Stringtheorie. Sollte sie sich als richtig erweisen, so würde das unser Verständnis über den Ursprung der Naturgesetze dramatisch verändern. Denn das von uns beobachtete Universum wäre dann vermutlich eine winzige Blase in einem viel größeren Gebilde, dem Multiversum. Um die Stringtheorie und die Idee des Multiversums plausibel zu machen, greift der international bekannte theoretische Physiker Dieter Lüst auf ein Modell zurück: das Leben von Fischen in einem Teich. Eines Tages gelingt es den Fischen, die kleinsten Teilchen zu identifizieren, aus denen alles im Fischteich besteht - eingeschlossen sie selbst. Sie nennen diese Urbausteine Quantenfische, da ihr Verhalten nahelegt, dass sie auch eine Art von Lebewesen sind. Doch der ersten folgt eine weitere Entdeckung der Fisch...

  3. DEM Calibration Approach: design of experiment

    Science.gov (United States)

    Boikov, A. V.; Savelev, R. V.; Payor, V. A.

    2018-05-01

    The problem of DEM models calibration is considered in the article. It is proposed to divide models input parameters into those that require iterative calibration and those that are recommended to measure directly. A new method for model calibration based on the design of the experiment for iteratively calibrated parameters is proposed. The experiment is conducted using a specially designed stand. The results are processed with technical vision algorithms. Approximating functions are obtained and the error of the implemented software and hardware complex is estimated. The prospects of the obtained results are discussed.

  4. Small catchments DEM creation using Unmanned Aerial Vehicles

    Science.gov (United States)

    Gafurov, A. M.

    2018-01-01

    Digital elevation models (DEM) are an important source of information on the terrain, allowing researchers to evaluate various exogenous processes. The higher the accuracy of DEM the better the level of the work possible. An important source of data for the construction of DEMs are point clouds obtained with terrestrial laser scanning (TLS) and unmanned aerial vehicles (UAV). In this paper, we present the results of constructing a DEM on small catchments using UAVs. Estimation of the UAV DEM showed comparable accuracy with the TLS if real time kinematic Global Positioning System (RTK-GPS) ground control points (GCPs) and check points (CPs) were used. In this case, the main source of errors in the construction of DEMs are the errors in the referencing of survey results.

  5. Folgebewertung im vorratsvermögen - Fallstudie zur Vorgehensweise nach IFSR und HGB

    DEFF Research Database (Denmark)

    Quick, Reiner; Warming-Rasmussen, Bent

    2013-01-01

    über die wichstigsten Normen zur Folgebeweriung nach IFSR und HGB sowie zu deren Auslegung. Es schliessen sich ein Fallbeispiel und ein Vorschlag zu dessen Lösung an, in dessen Mittelpunkt sinkende Zeitwerte, die Frage des für die Folgebewerunng relevanten Markts und das Zuschreibungsgebot stehen....

  6. Zoophilie in Zoologie und Roman: Sex und Liebe zwischen Mensch und Tier bei Plutarch, Plinius dem Älteren, Aelian und Apuleius

    Directory of Open Access Journals (Sweden)

    Judith Hindermann

    2011-09-01

    Full Text Available Die Bedeutung von Zoophilie in der antiken Literatur wurde bislang – mit Ausnahme des Mythos – kaum untersucht. Überblickt man die überlieferten literarischen Texte, fällt auf, dass Zoophilie ausserhalb des Mythos vor allem in zwei literarischen Gattungen auftritt : Einerseits in den zoologischen Schriften von Plutarch, Plinius dem Älteren und Aelian, andererseits im antiken Roman, d.h. in den Metamorphosen des Apuleius und im pseudo-lukianischen Onos. In diesem Beitrag soll untersucht werden, welche Funktion Zoophilie in den beiden literarischen Gattungen hat und wie die Autoren die sexuelle Praktik bewerten, die weder nach griechischem noch römischen Recht strafbar war. Da Vorstellungen über Tiere eng mit Gender und Geschlechterhierarchien verbunden sind, soll insbesondere die Frage berücksichtigt werden, inwiefern männliche und weibliche Verhaltens- und Rollenzuschreibungen bei der Darstellung zoophiler Akte wirksam werden.

  7. Auf dem Weg zu einer ‹vernetzenden› Profession. Theoretisch-konzeptionelle Überlegungen zum Selbstverständnis der Medienpädagogik

    Directory of Open Access Journals (Sweden)

    Kai-Uwe Hugger

    2017-06-01

    Full Text Available In die Professionalisierungsdebatte der erziehungswissenschaftlichen Disziplin gehört auch die Auseinandersetzung mit dem Selbstverständnis der Medienpädagogik bzw. des Medienpädagogen. Die Medienpädagogische Professionalisierungsdiskussion stellt daher für den Autor gleichzeitig die Basis für einen Klärungsversuch einer medienpädagogischen Identität dar. Er beschreibt und analysiert Professionalisierungsstrategien aufgrund von vier Konzepten medienpädagogischer Professionalität: der beschützend-wertevermittelnde, der gesellschaftskritisch-wissenschaftszentrierte, der bildungstechnologisch-opitimierende und der vernetzte Medienpädagoge. Über den Begriff der Medienkompetenz nach Baacke stellt er zentrale Eckpunkte einer Struktur medienpädagogischen Handelns auf. (DIPF/Orig..

  8. Biodegradable plastics in composting. Results of a practical experiment in the Bad Duerkheim district; Einsatz von biologisch abbaubaren Kunststoffen in der Kompostwirtschaft. Erkenntnisse und Erfahrungen aus dem Praxisversuch im Landkreis Bad Duerkheim

    Energy Technology Data Exchange (ETDEWEB)

    Pabst, Klaus [Abfallwirtschaftsbetrieb Landkreis Bad Duerkheim, Bad Duerkheim (Germany)

    2012-11-01

    For collecting biomass waste, about 65,000 households in the Bad Duerkheim district were given ten bags each of the compostable BASF plastic material Ecovio {sup registered} FS. The biomass waste collected in the Ecovio {sup registered} bags were composted in a composting plant. After the compost process, no residues of the Ecovio {sup registered} bags were found in the rotting, i.e. they are completely degradable. Neither the compost quality nor the working processes in the composting plant were affected, and there was no bigger volume of sorting residues. 90% of the users stated that they were satisfied with the new biomass waste bags. (orig.) [German] Fuer die Entsorgung des Bioabfalls erhielten rund 65.000 Haushalte aus dem Landkreis Bad Duerkheim je zehn Biomuelltuten aus dem kompostierbaren BASF-Kunststoff Ecovio {sup registered} FS. Die in diesen Ecovio {sup registered} -Tueten gesammelten Bioabfaelle wurden im Biokompostwerk zu Kompost verarbeitet. Nach dem Kompostierungsprozess konnten keine Reste der Ecovio {sup registered} -Folien mehr in der Rotte gefunden werden, und sie wurden vollstaendig biologisch abgebaut. Durch den Einsatz dieser Tueten wurden weder die Kompostqualitaet noch die Arbeitsablaeufe im Biokompostwerk beeintraechtigt. Eine Erhoehung der Sortierreste war nicht festzustellen. Im Rahmen einer Kundenbefragung aeusserten sich rund 90% zufrieden mit dem Einsatz dieser Biomuelltueten. (orig.)

  9. Development of an automatic scanning system for nuclear emulsion analysis in the OPERA experiment and study of neutrino interactions location; Developpement d'un systeme ultra rapide pour le scan des emulsions nucleaires d'OPERA et etude sur la localistion des vertex de l'interaction des neutrinos a l'aide de ce systeme

    Energy Technology Data Exchange (ETDEWEB)

    Arrabito, L

    2007-10-15

    Following Super Kamiokande and K2K experiments, Opera (Oscillation Project with Emulsion tracking Apparatus), aims to confirm neutrino oscillation in the atmospheric sector. Taking advantage of a technique already employed in Chorus and in Donut, the Emulsion Cloud Chamber (ECC), Opera will be able to observe the {nu}{sub {mu}} {yields} {nu}{sub {tau}} oscillation, through the {nu}{sub {tau}} appearance in a pure {nu}{sub {mu}} beam. The Opera experiment, with its {approx} 100000 m{sup 2} of nuclear emulsions, needs a very fast automatic scanning system. Optical and mechanics components have been customized in order to achieve a speed of about 20 cm{sup 2}/hour per emulsion layer (44 {mu}m thick), while keeping a sub-micro-metric resolution. The first part of this thesis was dedicated to the optimization of 4 scanning systems at the French scanning station, based in Lyon. An experimental study on a dry objective scanning system has also been realized. The obtained results show that the performances of dry scanning are similar with respect to the traditional oil scanning, so that it can be successfully used for Opera. The second part of this work was devoted to the study of the neutrino interaction location and reconstruction strategy actually used in Opera. A dedicated test beam was performed at CERN in order to simulate Opera conditions. The obtained results definitely confirm that the proposed strategy is well adapted for tau search. (author)

  10. The German ''Energiewende''. Evaluation after the Paris-agreement; Die Deutsche Energiewende. Bewertung nach dem Klima-Abkommen von Paris

    Energy Technology Data Exchange (ETDEWEB)

    Roth, Eike

    2016-08-01

    The World-Climate-Summit 2016 in Paris agreed to exacerbated goals for climate protection. This paper will scrutinize whether Germany can comply with its Paris-obligations by continuing the ongoing German ''Energiewende''. The result is clear-cut: The German ''Energiewende'' is inadequate. Due to the cap-and-trade system of the EU the '''Energiewende''.

  11. Optimierung der Photonenselektion für die Suche nach dem Zerfall des Higgsbosons in zwei leichte CP-ungerade Skalare

    CERN Document Server

    Braren, Früd; Schleper, Peter

    In some extensions of the Standard Model, extended Higgs sectors are postulated, from which, in addition to the Standard Model-like Higgs boson, a new CP-odd scalar arises. If this scalar’s mass is small, final states consisting of two photon pairs would be generated by the decay of the Higgs boson into two of the above mentioned scalars and the subsequent decays of the scalars into photon pairs. In the ATLAS detector, such a pair of photons would be reconstructed as a single photon. In order to analyse the data generated by the ATLAS detector at the LHC, one needs to know the efficiency of the photon pairs to be identified as a single photon. Using Monte-Carlo simulations, this identification efficiency is calculated and analysed for several photon selections and for three different masses of the scalar in the mass range of 100 to 400 MeV. This leads to the creation of an optimized cut menu for this final state. The aim of this is to make the analysis of the ATLAS-generated data with regard to this special...

  12. Aspects of reactor dismantling planning following the safe entombment in the NPP Lingen (KWL); Aspekte der Abbauplanung nach dem Sicheren Einschluss im Kernkraftwerk Lingen (KWL)

    Energy Technology Data Exchange (ETDEWEB)

    Priesmeyer, U.; Rojahn, T.; Fries, B. [Kernkraftwerk Lingen GmbH (Germany)

    2009-07-01

    The NPP Lingen (KWL) was shut-down in 1977. Due to the fact that no final repository was available the safe entombment for 25 years was chosen following the decommissioning. The conventional plant components were dismantled and removed from the plant site. The licensing procedure for reactor dismantling with final disposal in Schacht Konrad has been started. The beginning of dismantling operation is scheduled for 2013. The authors describe the preparatory work, the boundary conditions for the dismantling, radiation protection considerations with respect to manual demolition work after the rather long decay time.

  13. Outsourcing Marketing Activities - a strategic option for energy suppliers. Increasing efficiency and reducing costs; Netzvertraeglichkeitspruefungen nach dem Erneuerbare-Energien-Gesetz. Verpflichtung zur Vorlage der Netzdaten

    Energy Technology Data Exchange (ETDEWEB)

    Weissenborn, C. [Bereich Recht und Umwelt, Verband der Elektrizitaetswirtschaft - VDEW - e.V., Berlin (Germany)

    2006-07-03

    The transfer or certain functions in a company which do not belong to the originary core of the business to specialists has becom a normal attitude in economy nowadays. Thus it is no longer something special to decide for outsourcing facturing, personnel, legal or IT service departments. Up to now, marketing was not included in such considerations, not in energy industry at least. The following article shows that this might change in the years to come and explains which advantages could be achieved by outsourcing marketing activities and transferring them to third parties.

  14. Provision of regulating energy in the context of direct marketing according to the EEG 2012; Zur Bereitstellung von Regelleistung im Rahmen der Direktvermarktung nach dem EEG 2012

    Energy Technology Data Exchange (ETDEWEB)

    Breuer, Daniel [Landgericht Koeln (Germany); Osborne Clarke, Koeln (Germany)

    2012-07-01

    Electric power from wind power plants and photovoltaic power plants cannot be stored and is not available at all times. The results are volatile power supply curves, risks of availability forecasting for grid owners or (direct) marketers, and enhanced requirements on grid operation with stable frequency. All this will directly affect the reliability of power supply in Germany. Grid integration and market integration of renewable energy sources are directly connected. The contribution discusses the challenges of ensuring grid stability as well as the legal regulations governing the supply of regulating power from renewable energy sources. Since 1 January 2012, regulating power from renewable energy sources is provided within the scope of the EEG only by direct marketing, i.e. without receiving fixed reimbursement rates. Direct marketing is only possible outside the scope of the EEG, but this is without relevance for the time being. (orig.)

  15. The modern Saamish reindeer husbandry in Sweden after the reactor accident of Chernobyl. Die moderne samische Rentierwirtschaft Schwedens nach dem Reaktorunfall von Tschernobyl; Eine humangeographische Struktur- und Problemanalyse

    Energy Technology Data Exchange (ETDEWEB)

    Wolf, J

    1992-01-01

    Large parts of the reindeer herding area in Sweden were contaminated with radioactive caesium from the Chernobyl fallout deposited mainly between 62 and 66 n.lat. by heavy rain-and snowfalls between April 28-30, the fjell and boreal forest regions of north-western Jaemtland and south-western Vaesterbotten being the home of 500 reindeer Saamis, organized in 19 Saamebys, and being the winter- and summer reindeer grazing areas for about 100000 reindeer worst contaminated, with a maximum soil contamination of 60000 Bq/m[sup 2] Cs137 along a line Gaevle-Gaeddede. The socio-economic effects and consequences of Chernobyl have on the hand changed the daily and yearly work routine patterns by applying early slaughter and feeding programs. On the other hand it has shown the vulnerability of reindeer husbandry in particular and of Saami culture and livelihood in general. It has also pointed out the influence of the state compensation payments have helped the mostly hit Saamebys to survive economically and the Saami herders to preserve their ethic identity and specific way of life. The measure of introducing a strict radioactivity limit should be fixed internationally. In reindeer meat where the average annual consumption is as low as 200 g per person a limit as low as 300 pr 1500 Bq/kg is in fact ineffective in reducing cancer risks but it has proved disastrous for the reindeer meat market.

  16. Radioactivity concentrations in Bavarian surface water after the Chernobyl reactor accident. Radioaktive Belastungen des Wassers in Bayern nach dem Reaktorunfall in Tschernobyl

    Energy Technology Data Exchange (ETDEWEB)

    Amann, W; Friedmann, L; Lux, D

    1986-01-01

    The special investigation programme for monitoring radioactive immissions, which was primarily concerned with drinking water, initially led to the discovery of high rates of precipitate pollution by I-131, I-132, Cs-134, Cs-137 and Te-132. Since initial investigations had revealed no increases in total alpha and tritium values, gamma-spectrometric determinations were effected exclusively for single nuclides. Later on, a considerable accumulation of the nuclides Cs-134, Cs-137 and Ru-103 was discoverd in the sediments of surface bodies of water and in sewage sludges. The effects of the reactor accident on surface water are still being monitored in a long-term metering programme. (DG).

  17. Higher efficiency, lower bonuses. Financial incentives for power from biomass according to EEG 2012; Mehr Effizienz, weniger Boni. Die Foerderung von Strom aus Biomasse nach dem EEG 2012

    Energy Technology Data Exchange (ETDEWEB)

    Mueller, Dominik [Ecologic Institute, Berlin (Germany)

    2012-07-01

    The German parliament passed a total of eight new laws for the intended energy turnaround. Apart from changes in atomic law, the focus was on a complete amendment of the Renewables Act (EEG). The contribution outlines the new regulations for power generation from biomass from 2012. It indicates the changes from former regulations and describes the structural changes required for sustainable power supply from biomass, among others.

  18. Heat grids today and after the German Renewable Energies Act (EEG). A business segment for the agriculture?; Waermenetze heute und nach dem EEG. Ein Betriebszweig fuer die Landwirtschaft?

    Energy Technology Data Exchange (ETDEWEB)

    Clemens, Dietrich; Billerbeck, Hagen [Treurat und Partner Unternehmensberatungsgesellschaft mbH, Lueneburg (Germany). Abt. ' ' Climate and Energy' '

    2016-08-01

    The development of a centralised and sustainable heat supply through the construction of heat grids offers consumers numerous advantages compared to a decentralised energy supply of residential and commercial properties. Where the migration to centralised heat supply relegates fossil fuels through the long-term incorporation of sustainable renewable energy sources, the projects make an important contribution towards meeting the government's climate protection goals. Heat generation and heat sales from renewable energy sources should be ensured in the long term. In the countryside, biogas plant operators are frequently the initiators of heat grid investments, or they take on the role of supplier for the provision of low-cost CHP heat from cogeneration units. In view of the limited remuneration period under the terms of the German Renewable Energy Act, the clock is ticking for the establishment of a centralised heat supply. This paper presents the advantages and disadvantages of a centralised, sustainable heat supply and additionally considers the flexibi/isation of biogas plants in view of the construction of the heat grid and the associated infrastructure. A focus is placed on the security of supply for customers after the discontinuation of remuneration under the German Renewable Energy Act and on how a competitive heat price from alternative energy sources can continue to be ensured.

  19. Following the radiation accident in Fukushima. Consequences for information management; Nach dem Strahlenunfall in Fukushima. Ein Beitrag zur Aufarbeitung der 'Lessons Learnt'

    Energy Technology Data Exchange (ETDEWEB)

    Meineke, Viktor [Universitaet der Bundeswehr, Muenchen (Germany). Inst. fuer Radiobiologie

    2012-07-01

    The differing perceptions of risk in Japan and Germany, the changing psychosocial factors since the Chernobyl event, and the problem of the lacking basic knowledge concerning radiation effects at the general population as well as partially in medical circles are discussed and conclusions are made regarding the information management and the medical management of radiation accidents. (orig.)

  20. The climate-problem. Evaluation after the Paris-agreement and the Marrakesh-conference; Das Klimaproblem. Bewertung nach dem Paris-Abkommen und der Marrakesch-Konferenz

    Energy Technology Data Exchange (ETDEWEB)

    Roth, Eike

    2017-05-15

    The Paris-Climate-Agreement came into effect on November 4th 2016. Still, the contradiction in this agreement - ambitious goals and (presumably) inadequate commitments - has persisted. Also in the follow-up conference in Marrakesh, this discrepancy remained unresolved. 2017 the countries will meet again. However, since Donald Trump became president-elect of the United States of America, uncertainty about how the largest economy in the world will act in the future has intensified. This amplifies the pressure to clarify the true level of human influence on the climate in a scientifically consistent manner, as a basis for more reliable decisions. This paper tries to contribute to that effort.

  1. Suche nach dem Higgs-Boson in hadronischen Endzuständen mit fehlender Energie am L3-Experiment bei LEP

    CERN Document Server

    Zöller, Marc Henning

    2005-01-01

    This thesis presents searches for the Higgs boson, which is predicted by the Standard Model of Particle Physics and its extensions in order to endow fermions and bosons with their observed masses. While the Standard Model predicts only one Higgs boson »H«, the Minimal Supersymmetric Extension contains five Higgs bosons. This analysis refers to the light neutral »h«, which has nearly the same properties as the Standard Model Higgs boson. The analyses are based on data taken by the L3 experiment at the Large Electron Positron Collider (LEP) near Geneva during the years 1998 until 2000, which corresponds to an integrated luminosity of 629.7 pb−1 and which were collected in a center-of-mass energy range from 189 GeV to 209 GeV. The Higgs boson searches presented here analyse the data with regard to hadronic events with missing energy, since the visible energy is reduced compared to the total energy given by the LEP collider. According to theoretical prediction these final states can be produced via the Higg...

  2. Medien – Generationen – Wissen. Überlegungen zur medienpädagogischen Forschung – dargestellt am Beispiel der Frage nach dem Weltwissen globaler Mediengenerationen

    Directory of Open Access Journals (Sweden)

    Theo Hug

    2017-07-01

    Full Text Available Mit den aktuellen gesellschaftlichen, technologischen und politischen Entwicklungen haben sich neue Fragen und Aufgabenbereiche für die Medienpädagogik ergeben. Diese werden im vorliegenden Beitrag skizziert, wobei in Abgrenzung von traditionellen Auffassungen für ein weiteres Verständnis von Medienpädagogik argumentiert wird. Die Erweiterung des thematischen Horizonts wird anhand einer Pilotstudie zur Frage des Weltwissens von Mediengenerationen exemplarisch verdeutlicht. Abschließend werden einige Überlegungen zur Medienkompetenz, der Problematik diesbezüglicher Verkürzungen und deren Stellenwert im Lichte des „medial turn“ zur Diskussion gestellt.

  3. The German ''Energiewende''. Evaluation after the Paris-agreement; Die Deutsche Energiewende. Bewertung nach dem Klima-Abkommen von Paris

    Energy Technology Data Exchange (ETDEWEB)

    Roth, Eike

    2016-12-15

    The World-Climate-Summit 2016 in Paris agreed to exacerbated goals for climate protection. This paper will scrutinize whether Germany can comply with its Paris-obligations by continuing the ongoing German ''Energiewende''. The result is clear-cut: The German ''Energiewende'' is inadequate. Due to the cap-and-trade system of the EU the ''Energiewende'' can in no way contribute to climate protection.

  4. Updated action plan for the implementation of measures as a consequence of the Fukushima reactor accident; Fortgeschriebener Aktionsplan zur Umsetzung von Massnahmen nach dem Reaktorunfall in Fukushima

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2014-01-15

    The action plan of the German government concerning the measures following the Fukushima reactor accident include the decision on the future of nuclear power in Germany, safety analyses, investigations and measures for nuclear power plants in a national frame, investigations in an international frame, planning for the implementation of CNS (Convention on nuclear safety) topics 1-3, i.e. measures to increase the robustness in German nuclear power plants, and the planning of implementation of further measures (CNS topics 4-6).

  5. Tanne plant - first results of soil treatment according to the anaerobic/aerobic method; Werk Tanne - Erste Ergebnisse der Bodenbehandlung nach dem Anaerob-Aerob-Verfahren

    Energy Technology Data Exchange (ETDEWEB)

    Fischer, D.; Walter, U. [Umweltschutz Nord GmbH, Ganderkesee (Germany)

    1999-02-01

    Biological remediation of STV contaminated sites has been a major focus of the promotion activities of the Federal Research and Education Ministry (BMFB) for some years now. For this purpose the BMFB has drawn together diverse integrated research projects to bring a well-coordinated force of activities to bear on this problem in a manner unprecedented in Germany. Its declared aim in doing so is, firstly, to compile a guide on biological remediation and, secondly, to funnel the output of all ongoing German research in this field into the second phase of its research activities at the ''Tanne'' plant in Clausthal-Zellerfeld, which is dedicated to practice-oriented testing of methods for the biological remediation of STV contaminated sites. [German] Die biologische Sanierung von Standorten, welche mit STV kontaminiert sind, ist seit einigen Jahren eines der markanten Ziele der BMBF-Forschungsfoerderungen. Durch die bislang in der bundesweiten Forschung einmalige, Forschungsverbund uebergreifende, koordinierte Buendelung saemtlicher wissenschaftlicher Aktivitaeten ist es erklaertes Ziel, zum einen einen Leitfaden zur biologischen Sanierung herauszuarbeiten, zum anderen, die aktuellen, bundesweiten, wissenschaftlichen Erkenntnisse in die seit Mai 1998 am Standort 'Werk Tanne' in Clausthal-Zellerfeld laufende Phase 2 der BMBF-Forschungsaktivitaeten, naemlich die praxisorientierte Erprobung von Verfahren zur biologischen Sanierung von STV-belasteten Standorten, einzugreifen. (orig.)

  6. Restoration of intact ground waters and surface waters in the post-mining landscape; Wiederherstellung intakter Grund- und Oberflaechengewaesser nach dem Braunkohlenbergbau

    Energy Technology Data Exchange (ETDEWEB)

    Merkel, Broder; Schipek, Mandy [Technische Univ. Bergakademie Freiberg (Germany); Scholz, Guenter; Rabe, Wolfgang; Clauss, Denny [MOVAB-D GmbH, Lauta (Germany)

    2011-12-15

    The restoration of the territories of former brown coal mining increasingly requires special efforts for the protection of affected ground waters and surface waters. With newly developed methods (the so-called inlake technology), recently various solutions to neutralize acidic mining lakes could be created. Simultaneously, this improves the water quality of adjacent aquifers at reasonable financial cost.

  7. Long-Wave Radiation Divergence over Water and Land from Measurement and Calculation (Die Langwellige Strahlungsdivergenz ueber Wasser und ueber dem Festen Boden nach Messung und Rechnung),

    Science.gov (United States)

    surface temperature field. If these are eliminated, which is relatively simple over a water surface, the differences between calculated and measured...divergences at these levels is less than 20%, on the average. The relative variation of the divergence with height is somewhat greater over water than over land, due to the different temperature profiles. (Author)

  8. Impacts of DEM resolution and area threshold value uncertainty on ...

    African Journals Online (AJOL)

    ... that DEM resolution influences the selected flow accumulation threshold value; the suitable flow accumulation threshold value increases as the DEM resolution increases, and shows greater variability for basins with lower drainage densities. The link between drainage area threshold value and stream network extraction ...

  9. Body weight gain after radioiodine therapy of hyperthyroidism; Koerpergewichtsentwicklung nach Radioiodtherapie einer Hyperthyreose

    Energy Technology Data Exchange (ETDEWEB)

    Scheidhauer, K.; Odatzidu, L.; Schicha, H. [Koeln Univ. (Germany). Klinik und Poliklinik fuer Nuklearmedizin; Kiencke, P. [Koeln Univ. (DE). Inst. fuer Medizinische Statistik, Informatik und Epidemiologie (IMSIE)

    2002-02-01

    Aim: Analysis and follow up of body weight after radioiodine therapy (RITh) of hyperthyroidism, since excessive weight gain is a common complaint among these patients. Methods: Therapy and body weight related data of 100 consecutive RITh-patients were retrospectively analysed from the time before up to three years after RITh. All patients suffered from hyperthyroidism (Graves' disease or autonomy), but were adjusted to euthyroid levels after RITh. Patients' data were compared to a control group of 48 euthyroid patients out of the same ambulance and during the same time scale. Results: All patients (RITh and controls) gained weight over the time. There was no statistically significant difference in BMI development over three years between RITh-patients and controls (5.5% resp. 4.9% increase). In the first year after RITh, weight gain of the RITh patients was higher indeed, but lower in the follow up, resulting in the same range of weight gain after three years as the controls. Besides that women showed a slightly higher increase of BMI than men, and so did younger patients compared to elder as well as patients with overweight already before RITh. Conclusions: An initially distinct increase of body weight after RITh of hyperthyroidism is mainly a compensation of pretherapeutic weight loss due to hyperthyroidism. Presupposing adequate euthyroid adjustment of thyroid metabolism after therapy, RITh is not responsible for later weight gain and adipositas. (orig.) [German] Ziel: Untersuchung der Entwicklung des Koerpergewichtes nach {sup 131}I-Therapie einer Hyperthyreose, da der Radioiodtherapie (RITh) haeufig eine exzessive posttherapeutische Gewichtszunahme angelastet wird. Methoden: Retrospektiv wurden therapie- und koerpergewichtsbezogene Daten von 100 konsekutiven Patienten vor und bis drei Jahre nach RITh einer Hyperthyreose (Morbus Basedow oder funktionelle Autonomie) erfasst und mit denen einer euthyreoten Kontrollgruppe (n = 48) verglichen. Die

  10. DNA-Methylierung nach abiotischen und biotischen Einflüssen und Expressionsanalyse pathogeninduzierter Gene in Picea abies (L.) Karst.

    OpenAIRE

    Baumann, Ruediger

    2006-01-01

    Basierend auf Beobachtungen über phänotypische Änderungen in Vollgeschwisterfamilien der Fichte,Picea abies, aus unterschiedlichen Kreuzungsumwelten wurde nach der geneti-schen Untersuchung mit EST-Markern eine kapillarelektrophoretische Untersuchung der DNA durchgeführt. Dabei wurden signifikante Unterschiede im Methylcytosin(mC)-Gehalt festgestellt. Messungen der mC-Gehalte nach Hitzeschock zeigten, den Einfluss der Um-weltbedingungen auf die Methylierung der DNA. Untersuchungen zur Dynamik...

  11. ASPECTS OF DEM GENERATION FROM UAS IMAGERY

    Directory of Open Access Journals (Sweden)

    A. Greiwe

    2013-08-01

    Full Text Available Since a few years, micro UAS (unmanned aerial systems with vertical take off and landing capabilities like quadro- or octocopter are used as sensor platform for Aerophotogrammetry. Since the restricted payload of micro UAS with a total weight up of 5 kg (payload only up to 1.5 kg, these systems are often equipped with small format cameras. These cameras can be classified as amateur cameras and it is often the case, that these systems do not meet the requirements of a geometric stable camera for photogrammetric measurement purposes. However, once equipped with a suitable camera system, an UAS is an interesting alternative to expensive manned flights for small areas. The operating flight height of the above described UAS is about 50 up to 150 meters above ground level. This low flight height lead on the one hand to a very high spatial resolution of the aerial imagery. Depending on the cameras focal length and the sensor's pixel size, the ground sampling distance (GSD is usually about 1 up to 5 cm. This high resolution is useful especially for the automatic generation of homologous tie-points, which are a precondition for the image alignment (bundle block adjustment. On the other hand, the image scale depends on the object's height and the UAV operating height. Objects like mine heaps or construction sites show high variations of the object's height. As a result, operating the UAS with a constant flying height will lead to high variations in the image scale. For some processing approaches this will lead to problems e.g. the automatic tie-point generation in stereo image pairs. As precondition to all DEM generating approaches, first of all a geometric stable camera, sharp images are essentially. Well known calibration parameters are necessary for the bundle adjustment, to control the exterior orientations. It can be shown, that a simultaneous on site camera calibration may lead to misaligned aerial images. Also, the success rate of an automatic tie

  12. Study of the CNGS beam and identification of muons in the Opera experiment. Optimization of the beam line from SPL-Frejus project; Etude du faisceau CNGS et identification des muons dans l'experience OPERA. Optimisation de la ligne de faisceau du projet SPL-Frejus

    Energy Technology Data Exchange (ETDEWEB)

    Cazes, A

    2004-12-15

    Neutrino oscillations are the subject of most of the experiments looking at this particle. This mechanism uses the fact that neutrinos have mass to allow the transformation from one flavour to another one. The OPERA experiment will start to take data in spring 2006. Its goal is to proof this mechanism with no ambiguity using the appearance of tau neutrinos in the CNGS beam, which is made of muon neutrinos. This thesis presents a description of neutrino beams in general, and more precisely of the CNGS beam, which is sent from CERN to Gran Sasso in Italy. The neutrino flux are recalculated, and simulations have been performed in order to study miss positioning of the beam line elements. The OPERA detector is made of bricks containing a pile of lead plates and photographic emulsion films, of two trackers and two spectrometers. The high position resolution of the emulsions (< 1 {mu}m ), allows to identify the {tau} created by the tau neutrino charged current interactions. The brick localisation is made using a scintillator array. The pattern recognition in these scintillators as well as in the spectrometers is one of the part of this thesis. Furthermore, a muon identification algorithm has been set up. It allows to reject by a factor 20 the charm background. Future of neutrino oscillation physics is the building of more and more intense neutrino beams, in order to measure the last unknown parameters ({theta}{sub 13} and {delta}{sub CP}). The project of neutrino beam from CERN to the Fr us tunnel is fully revisited in the last part of this thesis. An optimisation of all the beam line element is proposed, and allows to reach a sensitivity to {theta}{sub 13} around one degree. (author)

  13. Hydraulic fracturing - an attempt of DEM simulation

    Science.gov (United States)

    Kosmala, Alicja; Foltyn, Natalia; Klejment, Piotr; Dębski, Wojciech

    2017-04-01

    Hydraulic fracturing is a technique widely used in oil, gas and unconventional reservoirs exploitation in order to enable the oil/gas to flow more easily and enhance the production. It relays on pumping into a rock a special fluid under a high pressure which creates a set of microcracks which enhance porosity of the reservoir rock. In this research, attempt of simulation of such hydrofracturing process using the Discrete Element Method approach is presented. The basic assumption of this approach is that the rock can be represented as an assembly of discrete particles cemented into a rigid sample (Potyondy 2004). An existence of voids among particles simulates then a pore system which can be filled out by fracturing fluid, numerically represented by much smaller particles. Following this microscopic point of view and its numerical representation by DEM method we present primary results of numerical analysis of hydrofracturing phenomena, using the ESyS-Particle Software. In particular, we consider what is happening in distinct vicinity of the border between rock sample and fracking particles, how cracks are creating and evolving by breaking bonds between particles, how acoustic/seismic energy is releasing and so on. D.O. Potyondy, P.A. Cundall. A bonded-particle model for rock. International Journal of Rock Mechanics and Mining Sciences, 41 (2004), pp. 1329-1364.

  14. Substancinė Dievo formos kaita kaip meninė Visybės reprezentacija (pagal Thomo Manno romaną Juozapas ir jo broliai | Substanziales Werden der Form Gottes als künstleriche Repräsentation des Ganzen (nach der Tetralogie Joseph und seine Brüder von Thomas Mann

    Directory of Open Access Journals (Sweden)

    Juldita Nagliuvienė

    2004-01-01

    Full Text Available Anhand der Polemik zwischen der Totalitätsphänomenologie von Emmanuel Lévinas und der Selbstphänomenologie von Ernst Bloch werden in diesem Artikel die Erscheinungen Gottes, mit denen sich das patriarchalische Subjekt in die Beziehung eingetreten ist, analysiert. Vor allem aktualisiert man den substanziellen Inhalt der künstlerichen Gottesform, deren Wurzeln in der primitiven archaischen Ikonographie der Babylonier und der Ägypter liegen. Das Bild Gottes verwandelt sich in der Situation der Begegnung aus der Substanz des unförmigen Steines, die pfallische Intentionen des Helden akzentuiert, in die symbiotische Form eines Menschentieres (oder Gottes-Tieres, das als Fremde Gott auf der Ebene der Erzählung funktioniert und den Numenaspekt durch die künstliche Form der animalischen Gottheit in sich trägt. Durch die Maske des Tieres strebt der göttliche Begegnungspartner, der das Werden Gottes aktualisiert, nach der Verwandlung in die Gestalt eines sterbenden und wieder auferstehenden Menschen-Gottes, der den sündigen Menschen erlösen kann. In der Tetralogie von Thomas Mann existiert diese Ebene des Nochnicht-gewordenen-Gottes als utopische Stufe der vollkommenen Beziehungen zwischen Mensch und Gott. Die Begegnung zwischen dem tierischen Gott und dem Helden geschieht im Roman in der Traumsphäre, die den Dialog zwischen dem Kunstding und dem Menschen möglich macht. Auf der Traumebene wird der Prozess der Metamorphose einer Gottheit dargestellt, aber sie erscheint als ein schon verwandeltes Wesen, das die Antropomorphie des Erlösungsprinzips aufnimmt, und dem Helden erst im bewussten Zustand begegnet.

  15. Measurement of the neutrino velocity in OPERA experiment

    Energy Technology Data Exchange (ETDEWEB)

    Dracos, M., E-mail: marcos.dracos@in2p3.fr [IPHC, Université de Strasbourg, CNRS/IN2P3, F-67037 Strasbourg (France)

    2013-02-15

    The OPERA neutrino experiment has measured the neutrino velocity using the CERN CNGS beam over a baseline of 730 km. The measurement is based on data taken by OPERA in the years 2009, 2010, 2011. An arrival time of CNGS muon neutrinos with respect to the one computed assuming the speed of light in vacuum of (6.5±7.4(stat.){sub −8.0}{sup +8.3}(sys.))ns was measured corresponding to a relative difference of the muon neutrino velocity with respect to the speed of light (v−c)/c=(2.7±3.1(stat.){sub −3.3}{sup +3.4}(sys.))×10{sup −6}. During spring 2012 the CNGS provided during two weeks a short proton bunched beam dedicated to the neutrino velocity measurement. The OPERA neutrino experiment at the underground Gran Sasso Laboratory has measured the velocity of neutrinos with slightly modified setup compared to 2011 measurements. These modifications increased the timing accuracy and also fixed previous problems. The arrival time of CNGS muon neutrinos with respect to the one computed assuming the speed of light in vacuum has been found to be in agreement with the previous measurement. This result confirms the revised OPERA result and that indeed the neutrino anticipation announced in September 2011 was due to technical problems.

  16. Digital Elevation Models (DEMs) for the main 8 Hawaiian Islands

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Digital elevation model (DEM) data are arrays of regularly spaced elevation values referenced horizontally either to a Universal Transverse Mercator (UTM) projection...

  17. VT USGS NED Hydro-flattened DEM (30 meter) - statewide

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) VTHYDRODEM was created to produce a "hydrologically correct" DEM, compliant with the Vermont Hydrography Dataset (VHD) in support of the "flow...

  18. An Overview of the CapDEM Integrated Engineering Environment

    National Research Council Canada - National Science Library

    Lam, Sylvia; Poursina, Shiva; Spafford, Tim

    2005-01-01

    In order to gain a better understanding of the approach and the technology requirements to support collaborative engineering activities, the Collaborative Capability Definition, Engineering and Management (CapDEM...

  19. 2015 USACE NCMP Topobathy Lidar DEM: Avalon (NJ)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — These Digital Elevation Model (DEM) files contain rasterized topobathy lidar elevations at a 1 m grid size, generated from data collected by the Coastal Zone Mapping...

  20. IceBridge DMS L3 Photogrammetric DEM

    Data.gov (United States)

    National Aeronautics and Space Administration — The IceBridge DMS L3 Photogrammetric DEM (IODMS3) data set contains gridded digital elevation models and orthorectified images of Greenland derived from the Digital...

  1. 2013 USACE NCMP Topobathy Lidar DEM: Niihau (HI)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — These Digital Elevation Model (DEM) files contain rasterized topobathy lidar elevations at a 1 m grid size, generated from data collected by the Coastal Zone Mapping...

  2. 2015 USACE NCMP Topobathy Lidar DEM: Sand Island (WA)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — These Digital Elevation Model (DEM) files contain rasterized topobathy lidar elevations at a 1 m grid size, generated from data collected by the Coastal Zone Mapping...

  3. 2016 USACE NCMP Topobathy Lidar DEM: Gulf Coast (TX)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — These bare earth Digital Elevation Model (DEM) files contain rasterized topobathy lidar elevations at a 1 meter grid size, generated from data collected by the...

  4. 2016 NOAA Topobathy Lidar DEM: Upper Lake Michigan Islands

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This digital elevation model (DEM) was created from data collected by Leading Edge Geomatics using a Leica Chiroptera II Bathymetric & Topographic Sensor. The...

  5. 2015 USACE NCMP Topobathy Lidar DEM: Egmont Key (FL)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — These 1 m gridded bare earth Digital Elevation Model (DEM) files contain rasterized topobathy lidar elevations generated from data collected by the Coastal Zone...

  6. Greenland 5 km DEM, Ice Thickness, and Bedrock Elevation Grids

    Data.gov (United States)

    National Aeronautics and Space Administration — A Digital Elevation Model (DEM), ice thickness grid, and bedrock elevation grid of Greenland acquired as part of the PARCA program are available in ASCII text format...

  7. Use of recombinant, human TSH radioiodine therapy in patients with differentiated thyroid carcinoma; Radioiodtherapie des differenzierten Schilddruesenkarzinoms nach Vorbehandlung mit rekombinantem, humanem TSH

    Energy Technology Data Exchange (ETDEWEB)

    Luster, M. [Wuerzburg Univ. (Germany). Klinik und Poliklinik fuer Nuklearmedizin

    2001-12-01

    We describe the use of recombinant human TSH (rhTSH) in conjunction with ablative radioiodine therapy (RIT) in 11 patients (16 total treatments) with advanced and/or recurrent DTC (5 papillary, 6 follicular) for whom withdrawal of thyroid hormone suppressive therapy (THST) to increase serum TSH was not an option. Indications for rhTSH use in these patients included inability to tolerate withdrawal of thyroid hormones due to poor physical condition or inability to achieve sufficient serum TSH levels after THST withdrawal. All patients had undergone thyroidectomy and most (9/11) had received prior radioablative therapy after THST withdrawal. In 7 cases (5 patients), post-therapy Tg levels assessed at a mean of 4.3 months (range 2-10 months) after I-131 therapy were decreased by at least 30% compared to pre-therapy levels. In an additional 3 patients, whole body scans performed at follow-up indicated decreased or stabilized tumor burden compared to pre-therapy scans or marked clinical improvement was found. Three patients died of progressive disease within 2 months of therapy before follow-up assessments occurred. No adverse events were reported among the 8 surviving patients. The results suggest that rhTSH offers a promising alternative to THST withdrawal to allow radioablative therapy under maximal TSH stimulation in patients with advanced recurrent DTC who would not otherwise be able to receive this treatment. This therapeutic indication extends the clinical potential of the new agent, already demonstrated to be effective for use with I-131 for diagnostic purposes. However in some patients suffering from highly aggressive tumors the poor prognosis will not be improved. (orig.) [German] An unserer Klinik liegen bislang Erfahrungen mit 16 Radioiodtherapien (RIT) (z.T. mehrfache Anwendung) unter rhTSH vor. Die ueberwiegende Mehrzahl der Patienten wurde wegen einer fortgeschrittenen Tumorerkrankung mit dem Risiko einer lebensbedrohlichen Verschlechterung in

  8. Boreal forest biomass classification with TanDEM-X

    OpenAIRE

    Torano Caicoya, Astor; Kugler, Florian; Papathanassiou, Kostas; Hajnsek, Irena

    2013-01-01

    High spatial resolution X-band interferometric SAR data from the TanDEM-X, in the operational DEM generation mode, are sensitive to forest structure and can therefore be used for thematic boreal forest classification of forest environments. The interferometric coherence in absence of temporal decorrelation depends strongly on forest height and structure. Due to the rather homogenous structure of boreal forest, forest biomass can be derived from forest height, on the basis of allometric equati...

  9. Neues aus dem Forschungsfeld Deutsch als Zweitsprache. Sammelrezension

    Directory of Open Access Journals (Sweden)

    Claus Altmayer

    2015-03-01

    Full Text Available Neues aus dem Forschungsfeld Deutsch als Zweitsprache. Sammelrezension (Teil 2 von Bernt Ahrenholz (Hrsg. (2009, Empirische Befunde zu DaZ-Erwerb und Sprachförderung. Beiträge aus dem 3. ‚Workshop Kinder mit Migrationshintergrund‘; Karen Schramm & Christoph Schröder (Hrsg. (2009, Empirische Zugänge zu Spracherwerb und Sprachförderung in Deutsch als Zweitsprache; Stefan Jeuk (2010, Deutsch als Zweitsprache in der Schule. Grundlagen - Diagnose – Förderung

  10. Analysis of binding delivery agreements in electricity supply contracts from the angle of German and EC antitrust law; Die Beurteilung von Bezugsbindungen in Elektrizitaetsliefervertraegen nach deutschem und EG-Kartellrecht

    Energy Technology Data Exchange (ETDEWEB)

    Scholz, U.

    1998-12-31

    Binding delivery agreements in the form of contractual clauses determining exclusive total or partial coverage of electricity demand, take-or-pay contracts, or minimum purchase quota, are standard provisions of energy supply contracts concluded in order to ensure amortization of earlier commitments such as investment or other obligations. In the wake of the recent amendment of the German energy industry law for implementation of the deregulation of electricity markets in EU Member States, those agreements have become items of concern in the eyes of the cartel authority. In Germany, where utilities as from 1990 had to invest particularly strongly into the modernisation of existing power plants and distribution systems in the eastern parts of the country, review of the legality of those agreements touches upon vital interests of the electric power industry. The article here examines the situation with reference to EU legislation and the German law against restraints on competition (GWB). (orig./CB) [Deutsch] Bezugsbindungen in Gestalt von Gesamt- oder Teilbedarfsdeckungsklauseln, Take-or-Pay-Verpflichtungen oder Mindestbezugspflichten sind regelmaessig Bestandteile von Elektrizitaetsliefervertraegen, die zum einen der Amortisation bereits getaetigter Investitionen sowie eingegangener Verpflichtungen dienen. Insbesondere nach der Reform des deutschen Energiewirtschaftsrechts gewinnt die Frage der kartellrechtlichen Zulaessigkeit von Bezugsbindungen besondere Relevanz. Nicht zuletzt vor dem Hintergrund der besonders kapitalintensiven Investitionen zur Modernisierung der ostdeutschen Elektrizitaetsversorgung stellt sich daher die Frage, ob und inwieweit Bezugsbindungen nach der Aenderung des rechtlichen Ordnungsrahmens in der leitungsgebundenen Energieversorgung zulaessig sind. Der rechtliche Rahmen fuer die Beurteilung der Zulaessigkeit von Bezugsbindungen wird insbesondere durch die EU-Wettbewerbsregeln sowie die Bestimmungen des GWB gebildet. (orig.)

  11. Early alterations in the hip joint following epiphysiolysis for slipped femoral head. Results of an MRI study; Fruehveraenderugen im Hueftgelenk nach Epiphysiolysis capitis femoris. MRT-Untersuchungsergebnisse

    Energy Technology Data Exchange (ETDEWEB)

    Stoever, B. [Freiburg Univ. (Germany). Radiologische Klinik; Sigmund, G. [Freiburg Univ. (Germany). Radiologische Klinik; Huhle, P. [Freiburg Univ. (Germany). Orthopaedische Abteilung; Zwack, P. [Freiburg Univ. (Germany). Orthopaedische Abteilung; Reichert, A. [Freiburg Univ. (Germany). Orthopaedische Abteilung; Langer, M. [Freiburg Univ. (Germany). Radiologische Klinik

    1994-01-01

    With the aim of detecting patients at risk of developing coxarthritis, 34 patients were investigated prospectively by MRI 6-14 years after epiphysiolysis for slipped capital femoral head. In particular, cartilage changes were analysed by gradient-echo sequences. In 40% of the hip joints investigated cartilaginous lesions were present, detectable as irregularity and flattening of contour and more rarely as changes in signal intensity. In contrast, only 18% of the radiographs available revealed any pathology. When pelvic X-rays are normal or reveal slight sclerosis, cartilaginous lesions on MRI are considered early signs of coxarthrosis. This combination was seen especially often in patients with a primarily high angle of dislocation and in those who needed treatment by reposition or osteotomy. Only in 8 of the 17 hip joints showing sclerosis on conventional radiograms, sclerosis was also diagnosed by MRI, possibly because of partial volume and susceptibility effects at high field strength. Even with limited spatial resolution, cartilage examinations is warranted in young patients in whom early osteoarthritis can be expected. (orig.) [Deutsch] Mit dem Ziel, Veraenderungen am Hueftgelenk bei Patienten mit Arthroserisiko rechtzeitig zu erfassen, wurden 34 Patienten 6-14 Jahre nach einer Epiphysiolysis capitis femoris mittels MRT im Hochfeld bei 2/T nachuntersucht. Insbesondere sollten anhand der `FLASH`-Gradientenechosequenzen Knorpelveraenderungen analysiert werden. In 40% der untersuchten Hueftgelenke lagen Knorpellaesionen vor, sichtbar als Verduennung der Knorpelschicht, Konturunregelmaessigkeit und seltener als Signalintensitaetsveraenderungen. Dagegen waren nur 18% der vorhandenen Roentgenbefunde eindeutig pathologisch. Die kernspintomographisch sichtbaren Laesionen des Knorpels sind bei normalem Roentgenbild als Fruehveraenderungen zu werten und waren haeufiger bei Patienten mit primaer hohem Dislokationswinkel nachweisbar wie auch bei Patienten, bei denen eine

  12. Prevention of heterotopic ossification after total hip replacement. Using nonsteroidal antiinflammatory drugs versus radiation therapy: a prospective randomized trial; Prospektive Studie zur Vermeidung heterotoper Ossifikationen nach Hueftgelenksersatz. Nichtsteroidales Antirheumatikum versus Strahlentherapie

    Energy Technology Data Exchange (ETDEWEB)

    Koelbl, O.; Flentje, M. [Wuerzburg Univ. (Germany). Klinik und Poliklinik fuer Strahlentherapie; Eulert, J.; Barthel, T.; Knelles, D.; Kraus, U. [Orthopaedische Klinik Koenig-Ludwig-Haus Wuerzburg (Germany)

    1997-12-01

    einmalige postoperative Bestrahlung mit 1x5 Gy (93 Patienten) und 1x7 Gy (95 Patienten), die postoperative Gabe der nichtsteroidalen Antirheumatika Indometacin ueber sieben Tage (113 Patienten) bzw. ueber 14 Tage (90 Patienten) und Acetylsalicylsaeure ueber 14 Tage (93 Patienten). Das Ausmass der Ossifikationen wurde nach dem Brooker-Score beurteilt. Als zusaetzliches Vergleichskollektiv wurde eine Gruppe von 100 Patienten ausgewertet, die in den Jahren 1988 bis 1992 ebenfalls eine Endoprothese des Hueftgelenks bekamen, bei denen jedoch keine Ossifikationsprophylaxe durchgefuehrt worden war. Schlussfolgerung: Die postoperative Bestrahlung ist der Gabe von nichtsteroidalen Antirheumatika hinsichtlich der Verringerung der Ossifikationsrate nach totalendoprothetischem Hueftgelenkersatz ueberlegen. Da sich kein signifikanter Unterschied zwischen der fraktionierten Bestrahlung mit 4x3 Gy und der einmaligen Bestrahlung mit 1x7 Gy fand, die einmalige Bestrahlung aber den Vorteil der geringeren Belastung fuer den Patienten hat und zusaetzlich kostenguenstiger ist, ist diese einem fraktionierten Bestrahlungskonzept vorzuziehen. (orig./MG)

  13. Enhanced ASTER DEMs for Decadal Measurements of Glacier Elevation Changes

    Science.gov (United States)

    Girod, L.; Nuth, C.; Kääb, A.

    2016-12-01

    Elevation change data is critical to the understanding of a number of geophysical processes, including glaciers through the measurement their volume change. The Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) system on-board the Terra (EOS AM-1) satellite has been a unique source of systematic stereoscopic images covering the whole globe at 15m resolution and at a consistent quality for over 15 years. While satellite stereo sensors with significantly improved radiometric and spatial resolution are available today, the potential of ASTER data lies in its long consistent time series that is unrivaled, though not fully exploited for change analysis due to lack of data accuracy and precision. ASTER data are strongly affected by attitude jitter, mainly of approximately 4 and 30 km wavelength, and improving the generation of ASTER DEMs requires removal of this effect. We developed MMASTER, an improved method for ASTER DEM generation and implemented it in the open source photogrammetric library and software suite MicMac. The method relies on the computation of a rational polynomial coefficients (RPC) model and the detection and correction of cross-track sensor jitter in order to compute DEMs. Our sensor modeling does not require ground control points and thus potentially allows for automatic processing of large data volumes. When compared to ground truth data, we have assessed a ±5m accuracy in DEM differencing when using our processing method, improved from the ±30m when using the AST14DMO DEM product. We demonstrate and discuss this improved ASTER DEM quality for a number of glaciers in Greenland (See figure attached), Alaska, and Svalbard. The quality of our measurements promises to further unlock the underused potential of ASTER DEMs for glacier volume change time series on a global scale. The data produced by our method will thus help to better understand the response of glaciers to climate change and their influence on runoff and sea level.

  14. Imaging of postarthroscopic complications after knee injuries; Bildgebung postarthroskopischer Komplikationen nach Knieverletzungen

    Energy Technology Data Exchange (ETDEWEB)

    Schueller-Weidekamm, C. [Medizinische Universitaet Wien, Abteilung fuer Neuroradiologie und muskuloskelettale Radiologie, Klinik fuer Radiodiagnostik, Wien (Austria); Skrbensky, G. von [Medizinische Universitaet Wien, Klinik fuer Orthopaedie, Wien (Austria)

    2012-11-15

    The most common joint injuries in professional and recreational sports participants and also in the total population are knee injuries. Arthroscopy is indicated if this modality will improve the patient outcome and potential long-term complications can be avoided. Although uncommon, complications following arthroscopy are mostly evaluated by magnetic resonance imaging (MRI). For planning further therapy strategies following postarthroscopic complications, e.g. if anterior cruciate ligament (ACL) reconstruction is required, digital radiographs and computed tomography (CT) are helpful. This article provides an overview of the different procedures for surgical treatment which are a prerequisite for the analysis of postarthroscopic images. In addition typical complications after treatment of meniscal and chondral injuries as well as after ACL reconstruction are described and typical signs in MRI, radiography and CT are explained in detail. (orig.) [German] Kniegelenkverletzungen sind nicht nur bei Profisportlern, sondern auch in der Gesamtbevoelkerung die haeufigsten Gelenkverletzungen. Die Indikation zur arthroskopischen Operation wird gestellt, wenn im Vergleich zur konservativen Therapie ein besseres Ergebnis postarthroskopisch zu erwarten ist und potenzielle Spaetkomplikationen verhindert werden koennten. Die selten aber dennoch auftretenden postarthroskopischen Komplikationen werden zumeist mit der Magnetresonanztomographie (MRT) abgeklaert. Zur weiteren Therapieplanung nach Komplikationen, z. B. wenn eine Kreuzbandrevision notwendig ist, sind die digitale Projektionsradiographie und die Computertomographie (CT) hilfreich. Dieser Artikel bietet eine kurze Uebersicht ueber die unterschiedlichen Operationstechniken, die eine Voraussetzung fuer das Verstaendnis der bildgebenden postoperativen Veraenderungen sind. Weiter wird auf die haeufigsten Komplikationen nach Meniskus- und Knorpeloperationen sowie nach vorderer Kreuzbandrekonstruktion und den damit

  15. Einmaliges studentisches standardisiertes Training der chirurgischen Händedesinfektion nach EN1500: Quantifizierung des Trainingseffektes, Nutzen der Methode und Vergleich mit klinischen Referenzgruppen [A single standardized practical training for surgical scrubbing according to EN1500: Effect Quantification, value of the standardized method and comparison with clinical reference groups

    Directory of Open Access Journals (Sweden)

    Wullenk, Katharina

    2013-05-01

    Studierende der Medizin eines 8. Semesters wurden in Kontroll- und Interventionsgruppe randomisiert. Die Interventionsgruppe erhielt ein 45-minütiges standardisiertes Training durch geschulte Mitstudierende zum Verhalten im OP mit dem Teilaspekt der chirurgischen Händedesinfektion nach EN1500. Dem Desinfektionsmittel wurde Fluoreszenzfarbstoff beigemischt. Nach der Desinfektion wurden die 4 Handflächen eines jeden Probanden digital fotografiert und teilautomatisiert die nicht ausreichend benetzte Handfläche bestimmt. Die Ergebnisse aller studentischer Probanden wurden verglichen, sowie das Kompetenzniveau anhand zweier klinischer Referenzgruppen eingeordnet.Ergebnisse: Die Interventionsgruppe erreichte nach dem studentisch angeleiteten Training eine zu durchschnittlich 4,99% (SD 2,34 der gesamten vier Handflächen nicht sicher ausreichende Benetzung und war damit hoch signifikant (p<0,01 besser als die Kontrollgruppe mit 7,33% (SD 3,91. Im Vergleich zu den Referenzgruppen konnte in der Kontrollgruppe kein signifikanter Unterschied gezeigt werden, die Interventionsgruppe zeigte aber im Vergleich zu beiden Referenzgruppen hoch signifikant bessere Ergebnisse: Operateure 9,32% (SD 4,97, OP-Pflege 8,46% (SD 4,66. Der Methodenfehler ist vernachlässigbar gering. In der Subgruppenanalyse hinsichtlich der studentischen Vorerfahrungen zeigten sich gute Trainingseffekte in den Gruppen mit geringer und moderater Vorerfahrung, weniger in den Gruppen ohne bzw. mit großer Vorerfahrung. Alle Probanden zeigten die größten Benetzungslücken an den Handrücken im Vergleich zu den Handflächen.Diskussion: Ein einmaliges standardisiertes, studentisch angeleitetes Training der Einreibemethode EN1500 ist geeignet, die Benetzungslücken der Teilnehmer nach der chirurgischen Händedesinfektion um ein Drittel zu reduzieren und gleichzeitig das Kompetenzniveau klinischer Referenzgruppen von OP-Pflege und Operateuren zu erreichen oder gar zu übertreffen.

  16. ASS-induzierte Asthmaanfälle nach ASS-Desaktivierung - Fallbericht einer seltenen Komplikation

    OpenAIRE

    Doktorowski, S; Creutz, P; Förster-Ruhrmann, U; Olze, H

    2015-01-01

    Einleitung: Patienten mit einer nasalen Polyposis (NP), einem Asthma und einer ASS-Intoleranz sind häufig durch schwere Krankheitsverläufe gekennzeichnet. Die ASS-Desaktivierung ist eine Therapieoption mit günstigen Effekten auf rhinitische und pulmonale Beschwerden.Methoden: Vorstellung eines ungewöhnlichen Verlaufs eines Patienten nach ASS-Desaktivierung. Ergebnisse: Ein männlicher 34-jähriger Patient mit einer ASS-Trias (NP-Grad 2., FEV-1 94,7%, Ø Peakflow 470 l/Min) erhielt stationär p...

  17. Algumas anedotas sobre Demóstenes: uma releitura

    Directory of Open Access Journals (Sweden)

    Maddalena Vallozza

    2013-06-01

    Full Text Available Muitas das anedotas sobre Demóstenes estão relacionados a seus problemas de voz e a suas dificuldades no momento da hypokrisis. Eu proponho uma reinterpretação das páginas em que eles nos são transmitidos: de Quintiliano (11, 3, a principal testemunha, a Cícero (Orator 26 e 56-58, Brutus 142, De Oratore I 261 e III 213, do autor da seção sobre Demóstenes nas Vidas dos Dez Oradores (844 d-845 b à Vida de Demóstene, de Plutarco. Com base nisso, particularmente graças a Plutarco, que cita Hermipo e Demétrio de Fáleros, é possível formular a hipótese de que a tradição nasceu no Perípato, na área de interesses pela hypokrisis que demonstram o perdido Perì hypokríseos de Teofrasto e os fragmentos da Retórica de Demétrio de Fáleros.

  18. Scintigraphic diagnosis of silent aspiration following double-sided lung transplantation; Szintigraphischer Nachweis einer stillen Aspiration nach beidseitiger Lungentransplantation

    Energy Technology Data Exchange (ETDEWEB)

    Toenshoff, G. [Kiel Univ. (Germany). Klinik fuer Nuklearmedizin; Stock, U. [Kiel Univ. (Germany). Klinik fuer Herz- und Gefaesschirurgie; Bohuslavizki, K.H. [Kiel Univ. (Germany). Klinik fuer Nuklearmedizin; Brenner, W. [Kiel Univ. (Germany). Klinik fuer Nuklearmedizin; Costard-Jaeckle, A. [Kiel Univ. (Germany). Klinik fuer Herz- und Gefaesschirurgie; Cremer, J. [Kiel Univ. (Germany). Klinik fuer Herz- und Gefaesschirurgie; Clausen, M. [Kiel Univ. (Germany). Klinik fuer Nuklearmedizin

    1996-08-01

    We present a case of a 25 year old patient who underwent double-sided lung transplantation and suffered from recurrent pneumonia. Silent aspiration was suspected clinically. Aspiration was proved by scintigraphy enabling to discriminate between direct oro-pulmonal aspiration and aspiration after gastro-esophageal reflux. (orig.) [Deutsch] Vorgestellt wird der Fall einer 25jaehrigen Patientin nach beidseitiger Lungentransplantation und rezidivierenden Pneumonien. Klinisch bestand der Verdacht auf eine stille Aspiration. Szintigraphisch gelang sowohl der Aspirationsnachweis als auch eine Differenzierung hinsichtlich der Genese: Direkte oro-pulmonale Aspiration versus Aspiration nach gastrooesophagealem Reflux. (orig.)

  19. Novel application of DEM to modelling comminution processes

    International Nuclear Information System (INIS)

    Delaney, Gary W; Cleary, Paul W; Sinnott, Matt D; Morrison, Rob D

    2010-01-01

    Comminution processes in which grains are broken down into smaller and smaller sizes represent a critical component in many industries including mineral processing, cement production, food processing and pharmaceuticals. We present a novel DEM implementation capable of realistically modelling such comminution processes. This extends on a previous implementation of DEM particle breakage that utilized spherical particles. Our new extension uses super-quadric particles, where daughter fragments with realistic size and shape distributions are packed inside a bounding parent super-quadric. We demonstrate the flexibility of our approach in different particle breakage scenarios and examine the effect of the chosen minimum resolved particle size. This incorporation of the effect of particle shape in the breakage process allows for more realistic DEM simulations to be performed, that can provide additional fundamental insights into comminution processes and into the behaviour of individual pieces of industrial machinery.

  20. EVALUATING THE ACCURACY OF DEM GENERATION ALGORITHMS FROM UAV IMAGERY

    Directory of Open Access Journals (Sweden)

    J. J. Ruiz

    2013-08-01

    Full Text Available In this work we evaluated how the use of different positioning systems affects the accuracy of Digital Elevation Models (DEMs generated from aerial imagery obtained with Unmanned Aerial Vehicles (UAVs. In this domain, state-of-the-art DEM generation algorithms suffer from typical errors obtained by GPS/INS devices in the position measurements associated with each picture obtained. The deviations from these measurements to real world positions are about meters. The experiments have been carried out using a small quadrotor in the indoor testbed at the Center for Advanced Aerospace Technologies (CATEC. This testbed houses a system that is able to track small markers mounted on the UAV and along the scenario with millimeter precision. This provides very precise position measurements, to which we can add random noise to simulate errors in different GPS receivers. The results showed that final DEM accuracy clearly depends on the positioning information.

  1. Influence of Terraced area DEM Resolution on RUSLE LS Factor

    Science.gov (United States)

    Zhang, Hongming; Baartman, Jantiene E. M.; Yang, Xiaomei; Gai, Lingtong; Geissen, Viollette

    2017-04-01

    Topography has a large impact on the erosion of soil by water. Slope steepness and slope length are combined (the LS factor) in the universal soil-loss equation (USLE) and its revised version (RUSLE) for predicting soil erosion. The LS factor is usually extracted from a digital elevation model (DEM). The grid size of the DEM will thus influence the LS factor and the subsequent calculation of soil loss. Terracing is considered as a support practice factor (P) in the USLE/RUSLE equations, which is multiplied with the other USLE/RUSLE factors. However, as terraces change the slope length and steepness, they also affect the LS factor. The effect of DEM grid size on the LS factor has not been investigated for a terraced area. We obtained a high-resolution DEM by unmanned aerial vehicles (UAVs) photogrammetry, from which the slope steepness, slope length, and LS factor were extracted. The changes in these parameters at various DEM resolutions were then analysed. The DEM produced detailed LS-factor maps, particularly for low LS factors. High (small valleys, gullies, and terrace ridges) and low (flats and terrace fields) spatial frequencies were both sensitive to changes in resolution, so the areas of higher and lower slope steepness both decreased with increasing grid size. Average slope steepness decreased and average slope length increased with grid size. Slope length, however, had a larger effect than slope steepness on the LS factor as the grid size varied. The LS factor increased when the grid size increased from 0.5 to 30-m and increased significantly at grid sizes >5-m. The LS factor was increasingly overestimated as grid size decreased. The LS factor decreased from grid sizes of 30 to 100-m, because the details of the terraced terrain were gradually lost, but the factor was still overestimated.

  2. The risk for cancer and genetic abnormalities after radioiodine treatment of hyperthyroidism; Zum Krebs- und genetischen Risiko nach Radioiodtherapie der Hyperthyreose

    Energy Technology Data Exchange (ETDEWEB)

    Reiners, C. [Wuerzburg Univ. (Germany). Klinik und Poliklinik fuer Nuklearmedizin

    1997-12-01

    According to recent studies, the risk for thyroid cancer is not increased after radioiodine treatment in patients with hyperthyroidism. Only the risk of cancer of the stomach seems to be increased slightly in patents treated with I-131 because of functional autonomy. However, the risk for gastric cancer is not increased after higher activities of I-131 because of thyroid cancer. There is no increased risk for genetic abnormalities after radioiodine treatment of hyperthyroidism. (orig.) [Deutsch] Aktuelle Studien zum Karzinomrisiko nach Radioiodtherapie wegen Hyperthyreose ergeben keinen Anhalt fuer eine erhoehte Inzidenz des Schilddruesenkarzinoms nach therapeutischer Gabe von I-131. Allenfalls scheint die Inzidenz von Magenkarzinomen bei Patienten nach Radioiodtherapie wegen funktioneller Autonomie geringfuegig erhoeht zu sein, obwohl diese Beobachtung bei Patienten nach hochdosierter Radioiodtherapie wegen eines Schilddruesenkarzinoms nicht gemacht wurde. Hinweise fuer ein erhoehtes genetisches Risiko nach Radioiodtherapie der Hyperthyreose ergeben sich nicht. (orig.)

  3. Discrete Element Modeling (DEM) of Triboelectrically Charged Particles: Revised Experiments

    Science.gov (United States)

    Hogue, Michael D.; Calle, Carlos I.; Curry, D. R.; Weitzman, P. S.

    2008-01-01

    In a previous work, the addition of basic screened Coulombic electrostatic forces to an existing commercial discrete element modeling (DEM) software was reported. Triboelectric experiments were performed to charge glass spheres rolling on inclined planes of various materials. Charge generation constants and the Q/m ratios for the test materials were calculated from the experimental data and compared to the simulation output of the DEM software. In this paper, we will discuss new values of the charge generation constants calculated from improved experimental procedures and data. Also, planned work to include dielectrophoretic, Van der Waals forces, and advanced mechanical forces into the software will be discussed.

  4. Precise baseline determination for the TanDEM-X mission

    Science.gov (United States)

    Koenig, Rolf; Moon, Yongjin; Neumayer, Hans; Wermuth, Martin; Montenbruck, Oliver; Jäggi, Adrian

    The TanDEM-X mission will strive for generating a global precise Digital Elevation Model (DEM) by way of bi-static SAR in a close formation of the TerraSAR-X satellite, already launched on June 15, 2007, and the TanDEM-X satellite to be launched in May 2010. Both satellites carry the Tracking, Occultation and Ranging (TOR) payload supplied by the GFZ German Research Centre for Geosciences. The TOR consists of a high-precision dual-frequency GPS receiver, called Integrated GPS Occultation Receiver (IGOR), and a Laser retro-reflector (LRR) for precise orbit determination (POD) and atmospheric sounding. The IGOR is of vital importance for the TanDEM-X mission objectives as the millimeter level determination of the baseline or distance between the two spacecrafts is needed to derive meter level accurate DEMs. Within the TanDEM-X ground segment GFZ is responsible for the operational provision of precise baselines. For this GFZ uses two software chains, first its Earth Parameter and Orbit System (EPOS) software and second the BERNESE software, for backup purposes and quality control. In a concerted effort also the German Aerospace Center (DLR) generates precise baselines independently with a dedicated Kalman filter approach realized in its FRNS software. By the example of GRACE the generation of baselines with millimeter accuracy from on-board GPS data can be validated directly by way of comparing them to the intersatellite K-band range measurements. The K-band ranges are accurate down to the micrometer-level and therefore may be considered as truth. Both TanDEM-X baseline providers are able to generate GRACE baselines with sub-millimeter accuracy. By merging the independent baselines by GFZ and DLR, the accuracy can even be increased. The K-band validation however covers solely the along-track component as the K-band data measure just the distance between the two GRACE satellites. In addition they inhibit an un-known bias which must be modelled in the comparison, so the

  5. MR imaging of gastric wall layers in vitro: correlation to the histologic wall structure; Experimentelle Darstellung der Schichten der Magenwand mittels MRT: Korrelation mit dem histologischen Wandaufbau

    Energy Technology Data Exchange (ETDEWEB)

    Lubienski, A.; Grenacher, L.; Schipp, A.; Duex, M. [Radiologische Klinik, Abt. Radiodiagnostik, Ruprecht-Karls-Univ. Heidelberg (Germany); Reith, W. [Abt. fuer Neuroradiologie der Radiologischen Universitaetsklinik, Univ. Saarland (Germany); Mechtersheimer, G. [Inst. fuer Allgemeine Pathologie, Ruprecht-Karls-Univ. Heidelberg (Germany)

    2002-04-01

    Purpose: To correlate gastric wall layers visible of MRI with the anatomical structure of the gastric wall. Methods: After macroscopic preparation 5 x 5 cm post-mortem tissue sections of the gastric antrum were evaluated using a 2.4 Tesla MR unit (Bruker, Ettlingen, Germany). MR imaging consisted of T2-weighted multi-spinecho sequences in longitudinal and axial directions. The specimens then were stained with hematoxylin-eosin for histological examination. After that histological correlation of the gastric wall layers visible on MRI was performed. Results: In all specimens four gastric wall layers could be clearly identified on MRI. The direct comparison of those layers to the histological findings showed the following correlation: 1. intermediate signal = mucosa, 2. hypointense signal = lamina muscularis mucosae, 3. hyperintense signal = submucosa, 4. intermediate signal = muscularis propria. Conclusions: Gastric wall layers visible on MRI were successfully correlated to the anatomic layers of the gastric wall. This allows us for the first time to classify invasion of gastric carcinoma using high spatial-resolution MR imaging. However, the subserosa and serosa are excluded from this conclusion, because so far a reliable statement concerning the value of MRI to depict these very variable layers is not possible. (orig.) [German] Ziel: Ziel der Studie war es, magnetresonanztomographisch sichtbare Schichten der Magenwand mit dem anatomischen Wandaufbau des Magens zu korrelieren. Methoden: Nach makroskopischer Skelettierung wurden 5 x 5 cm messende Stuecke des Magenantrums von fuenf Leichenmaegen in einem 2.4 Tesla MR-Geraet (Bruker, Ettlingen, Deutschland) untersucht. Es wurden T2-gewichtete Multispinechosequenzen in longitudinaler und axialer Richtung zum Praeparat angefertigt. Nach Faerbung der Magenpraeparate mit Haematoxylin-Eosin wurden die MR-Bilder mit den histologischen Schnitten in Bezug auf sichtbare Wandschichten korreliert. Ergebnisse: Regelmaessig konnten

  6. Resource Management in Diffserv On DemAnd (RODA) PHR

    NARCIS (Netherlands)

    Westberg, L.; Jacobsson, M.; de Kogel, M.; Oosthoek, S.; Partain, D.; Rexhepi, V.; Wallentin, P.; Karagiannis, Georgios

    The purpose of this draft is to present the Resource Management in Diffserv (RMD) On DemAnd (RODA) Per Hop Reservation (PHR) protocol. The RODA PHR protocol is used on a per-hop basis in a Differentiated Services (Diffserv) domain and extends the Diffserv Per Hop Behavior (PHB) with resource

  7. Spatial Characterization of Landscapes through Multifractal Analysis of DEM

    Directory of Open Access Journals (Sweden)

    P. L. Aguado

    2014-01-01

    Full Text Available Landscape evolution is driven by abiotic, biotic, and anthropic factors. The interactions among these factors and their influence at different scales create a complex dynamic. Landscapes have been shown to exhibit numerous scaling laws, from Horton’s laws to more sophisticated scaling of heights in topography and river network topology. This scaling and multiscaling analysis has the potential to characterise the landscape in terms of the statistical signature of the measure selected. The study zone is a matrix obtained from a digital elevation model (DEM (map 10 × 10 m, and height 1 m that corresponds to homogeneous region with respect to soil characteristics and climatology known as “Monte El Pardo” although the water level of a reservoir and the topography play a main role on its organization and evolution. We have investigated whether the multifractal analysis of a DEM shows common features that can be used to reveal the underlying patterns and information associated with the landscape of the DEM mapping and studied the influence of the water level of the reservoir on the applied analysis. The results show that the use of the multifractal approach with mean absolute gradient data is a useful tool for analysing the topography represented by the DEM.

  8. Eine neue Tornaria aus dem Ostindischen Archipel (Tornaria Sunieri)

    NARCIS (Netherlands)

    Stiasny, G.

    1921-01-01

    Da aus dem malayischen Archipel durch die Siboga-Monographie Spengels (2) zwar eine Anzahl Enteropneusten, jedoch nur eine einzige Tornaria bekannt worden ist, war anzunehmen, dass noch andere Tornarien in diesem Gebiete nachzuweisen sein würden. Von dieser Erwartung ausgehend wandte ich mich an

  9. Artificial terraced field extraction based on high resolution DEMs

    Science.gov (United States)

    Na, Jiaming; Yang, Xin; Xiong, Liyang; Tang, Guoan

    2017-04-01

    With the increase of human activities, artificial landforms become one of the main terrain features with special geographical and hydrological value. Terraced field, as the most important artificial landscapes of the loess plateau, plays an important role in conserving soil and water. With the development of digital terrain analysis (DTA), there is a current and future need in developing a robust, repeatable and cost-effective research methodology for terraced fields. In this paper, a novel method using bidirectional DEM shaded relief is proposed for terraced field identification based on high resolution DEM, taking Zhifanggou watershed, Shannxi province as the study area. Firstly, 1m DEM is obtained by low altitude aerial photogrammetry using Unmanned Aerial Vehicle (UAV), and 0.1m DOM is also obtained as the test data. Then, the positive and negative terrain segmentation is done to acquire the area of terraced field. Finally, a bidirectional DEM shaded relief is simulated to extract the ridges of each terraced field stages. The method in this paper can get not only polygon feature of the terraced field areas but also line feature of terraced field ridges. The accuracy is 89.7% compared with the artificial interpretation result from DOM. And additional experiment shows that this method has a strong robustness as well as high accuracy.

  10. Evaluating DEM results with FEM perspectives of load : soil interaction

    NARCIS (Netherlands)

    Tadesse, D.

    2004-01-01

    Keywords: Load - soil interaction, soil structure, soil mechanical properties, FEM (Finite Element Method), Plaxis (Finite Element Code), granular particles, shear stress, DEM (Distinct Element Method),

  11. Estimating River Surface Elevation From ArcticDEM

    Science.gov (United States)

    Dai, Chunli; Durand, Michael; Howat, Ian M.; Altenau, Elizabeth H.; Pavelsky, Tamlin M.

    2018-04-01

    ArcticDEM is a collection of 2-m resolution, repeat digital surface models created from stereoscopic satellite imagery. To demonstrate the potential of ArcticDEM for measuring river stages and discharges, we estimate river surface heights along a reach of Tanana River near Fairbanks, Alaska, by the precise detection of river shorelines and mapping of shorelines to land surface elevation. The river height profiles over a 15-km reach agree with in situ measurements to a standard deviation less than 30 cm. The time series of ArcticDEM-derived river heights agree with the U.S. Geological Survey gage measurements with a standard deviation of 32 cm. Using the rating curve for that gage, we obtain discharges with a validation accuracy (root-mean-square error) of 234 m3/s (23% of the mean discharge). Our results demonstrate that ArcticDEM can accurately measure spatial and temporal variations of river surfaces, providing a new and powerful data set for hydrologic analysis.

  12. DEM-based research on the landform features of China

    Science.gov (United States)

    Tang, Guoan; Liu, Aili; Li, Fayuan; Zhou, Jieyu

    2006-10-01

    Landforms can be described and identified by parameterization of digital elevation model (DEM). This paper discusses the large-scale geomorphological characteristics of China based on numerical analysis of terrain parameters and develop a methodology for characterizing landforms from DEMs. The methodology is implemented as a two-step process. First, terrain variables are derived from a 1-km DEM in a given statistical unit including local relief, the earth's surface incision, elevation variance coefficient, roughness, mean slope and mean elevation. Second, every parameter regarded as a single-band image is combined into a multi-band image. Then ISODATA unsupervised classification and the Bayesian technique of Maximum Likelihood supervised classification are applied for landform classification. The resulting landforms are evaluated by the means of Stratified Sampling with respect to an existing map and the overall classification accuracy reaches to rather high value. It's shown that the derived parameters carry sufficient physiographic information and can be used for landform classification. Since the classification method integrates manifold terrain indexes, conquers the limitation of the subjective cognition, as well as a low cost, apparently it could represent an applied foreground in the classification of macroscopic relief forms. Furthermore, it exhibits significance in consummating the theory and the methodology of DEMs on digital terrain analysis.

  13. Grain sedimentation with SPH-DEM and its validation

    NARCIS (Netherlands)

    Robinson, M.J.; Luding, Stefan; Ramaioli, Marco; Yu, A; Dong, K; Yang, R; Luding, S

    2013-01-01

    Our mesoscale simulation method [M. Robinson, S. Luding, and M. Ramaioli, submitted (2013)] for multiphase fluid-particle flows couples Smoothed Particle Hydrodynamics (SPH) and the Discrete Element Method (DEM) and enjoys the flexibility of meshless methods, such as being capable to handling free

  14. a High Precision dem Extraction Method Based on Insar Data

    Science.gov (United States)

    Wang, Xinshuang; Liu, Lingling; Shi, Xiaoliang; Huang, Xitao; Geng, Wei

    2018-04-01

    In the 13th Five-Year Plan for Geoinformatics Business, it is proposed that the new InSAR technology should be applied to surveying and mapping production, which will become the innovation driving force of geoinformatics industry. This paper will study closely around the new outline of surveying and mapping and then achieve the TerraSAR/TanDEM data of Bin County in Shaanxi Province in X band. The studying steps are as follows; Firstly, the baseline is estimated from the orbital data; Secondly, the interferometric pairs of SAR image are accurately registered; Thirdly, the interferogram is generated; Fourth, the interferometric correlation information is estimated and the flat-earth phase is removed. In order to solve the phase noise and the discontinuity phase existing in the interferometric image of phase, a GAMMA adaptive filtering method is adopted. Aiming at the "hole" problem of missing data in low coherent area, the interpolation method of low coherent area mask is used to assist the phase unwrapping. Then, the accuracy of the interferometric baseline is estimated from the ground control points. Finally, 1 : 50000 DEM is generated, and the existing DEM data is used to verify the accuracy through statistical analysis. The research results show that the improved InSAR data processing method in this paper can obtain the high-precision DEM of the study area, exactly the same with the topography of reference DEM. The R2 can reach to 0.9648, showing a strong positive correlation.

  15. ArcticDEM Year 3; Improving Coverage, Repetition and Resolution

    Science.gov (United States)

    Morin, P. J.; Porter, C. C.; Cloutier, M.; Howat, I.; Noh, M. J.; Willis, M. J.; Candela, S. G.; Bauer, G.; Kramer, W.; Bates, B.; Williamson, C.

    2017-12-01

    Surface topography is among the most fundamental data sets for geosciences, essential for disciplines ranging from glaciology to geodynamics. The ArcticDEM project is using sub-meter, commercial imagery licensed by the National Geospatial-Intelligence Agency, petascale computing, and open source photogrammetry software to produce a time-tagged 2m posting elevation model and a 5m posting mosaic of the entire Arctic region. As ArcticDEM enters its third year, the region has gone from having some of the sparsest and poorest elevation data to some of the most precise and complete data of any region on the globe. To date, we have produced and released over 80,000,000 km2 as 57,000 - 2m posting, time-stamped DEMs. The Arctic, on average, is covered four times though there are hotspots with more than 100 DEMs. In addition, the version 1 release includes a 5m posting mosaic covering the entire 20,000,000 km2 region. All products are publically available through arctidem.org, ESRI web services, and a web viewer. The final year of the project will consist of a complete refiltering of clouds/water and re-mosaicing of all elevation data. Since inception of the project, post-processing techniques have improved significantly, resulting in fewer voids, better registration, sharper coastlines, and fewer inaccuracies due to clouds. All ArcticDEM data will be released in 2018. Data, documentation, web services and web viewer are available at arcticdem.org

  16. Nonlinear drift-diffusion model of gating in K and nACh ion channels

    Energy Technology Data Exchange (ETDEWEB)

    Vaccaro, S.R. [Department of Physics, University of Adelaide, Adelaide, South Australia 5005 (Australia)], E-mail: svaccaro@physics.adelaide.edu.au

    2007-09-03

    The configuration of a sensor regulates the transition between the closed and open states of both voltage and ligand gated channels. The closed state dwell-time distribution f{sub c}(t) derived from a Fokker-Planck equation with a nonlinear diffusion coefficient is in good agreement with experimental data and can account for the power law approximation to f{sub c}(t) for a delayed rectifier K channel and a nicotinic acetylcholine (nACh) ion channel. The solution of a master equation which approximates the Fokker-Planck equation provides a better description of the small time behaviour of the dwell-time distribution and can account for the empirical rate-amplitude correlation for these ion channels.

  17. Hydraulic correction method (HCM) to enhance the efficiency of SRTM DEM in flood modeling

    Science.gov (United States)

    Chen, Huili; Liang, Qiuhua; Liu, Yong; Xie, Shuguang

    2018-04-01

    Digital Elevation Model (DEM) is one of the most important controlling factors determining the simulation accuracy of hydraulic models. However, the currently available global topographic data is confronted with limitations for application in 2-D hydraulic modeling, mainly due to the existence of vegetation bias, random errors and insufficient spatial resolution. A hydraulic correction method (HCM) for the SRTM DEM is proposed in this study to improve modeling accuracy. Firstly, we employ the global vegetation corrected DEM (i.e. Bare-Earth DEM), developed from the SRTM DEM to include both vegetation height and SRTM vegetation signal. Then, a newly released DEM, removing both vegetation bias and random errors (i.e. Multi-Error Removed DEM), is employed to overcome the limitation of height errors. Last, an approach to correct the Multi-Error Removed DEM is presented to account for the insufficiency of spatial resolution, ensuring flow connectivity of the river networks. The approach involves: (a) extracting river networks from the Multi-Error Removed DEM using an automated algorithm in ArcGIS; (b) correcting the location and layout of extracted streams with the aid of Google Earth platform and Remote Sensing imagery; and (c) removing the positive biases of the raised segment in the river networks based on bed slope to generate the hydraulically corrected DEM. The proposed HCM utilizes easily available data and tools to improve the flow connectivity of river networks without manual adjustment. To demonstrate the advantages of HCM, an extreme flood event in Huifa River Basin (China) is simulated on the original DEM, Bare-Earth DEM, Multi-Error removed DEM, and hydraulically corrected DEM using an integrated hydrologic-hydraulic model. A comparative analysis is subsequently performed to assess the simulation accuracy and performance of four different DEMs and favorable results have been obtained on the corrected DEM.

  18. Der Ritter mit dem Hemd : drei Fassungen einer mittelalterlichen Erzählung

    OpenAIRE

    Dunphy, Graeme

    2011-01-01

    Unter den zahlreichen Motiven, die in der mittelalterlichen Literatur mit Frauendienst verbunden sind, gehört das vom Ritter mit dem Hemd zu den besonders interessanten. Es erscheint zunächst in dem ersten von fünf Fabliaux aus einer verlorenen Turiner Handschrift, die dem sonst unbekannten altfranzösischen Dichter Jacques de Baisieux zugeschrieben werden, einer heiteren Kurzgeschichte mit dem Titel "Des trois chevaliers et del chainse". In der vorliegenden Untersuchung gilt es, der Frage der...

  19. Digital Elevation Model (DEM), The county-wide DEM is published with a 20-foot grid size, though we have a more detailed DEM/DTM for some parts of the county, particularly the Green Bay Metro area, Published in 2000, 1:4800 (1in=400ft) scale, Brown County Government.

    Data.gov (United States)

    NSGIC Local Govt | GIS Inventory — Digital Elevation Model (DEM) dataset current as of 2000. The county-wide DEM is published with a 20-foot grid size, though we have a more detailed DEM/DTM for some...

  20. Accuracy of Cartosat-1 DEM and its derived attribute at multiple ...

    Indian Academy of Sciences (India)

    and information content was compared using mean elevation, variance and entropy statistics. Various ... required, but for local studies large scale represen- tation is ... been made to examine the effect of DEM accuracy ... accuracy of DEM is evaluated with respect to grid .... that loss of entropy is a measure of DEM quality or.

  1. Die Entstehung einer Nachbarsegmentdekompensation nach lumbaler Spondylodese. Einfluß des sagitalen Profils

    OpenAIRE

    Noe, Stephan

    2003-01-01

    Die vorliegende Arbeit beschäftigt sich mit der Frage, ob ein Zusammenhang zwischen der frühen Dekompensation einer Nachbaretage neben einem fusioniertem Bandscheibensegment im Lendenwirbelsäulenbereich und dem sagittalen Profil der Lendenwirbelsäule besteht. Im Rahmen der Untersuchungen wurden in einer retrospektiven Untersuchung die Krankenakten und Röntgenbilder von 51 Patienten der Zentralkliniken Bad Berka (Wirbelsäulenchirurgie) und Patienten der Orthopädischen Klinik des Universitä...

  2. Ordnungspolitische Fragen zur Unternehmenspublizität nach der Enron-Insolvenz

    OpenAIRE

    Zimmermann, Jochen

    2002-01-01

    Am 2. Dezember 2001 hat der US-amerikanische Energiehändler Enron Insolvenz angemeldet. Für viele völlig überraschend brach das an der Börsennotierung gemessen vormals siebtgrößte Unternehmen der USA zusammen. Welche ordnungspolitischen Lehren sind für die Publizität und Rechnungslegung von Unternehmen aus dem Fall Enron zu ziehen?

  3. A comparative appraisal of hydrological behavior of SRTM DEM at catchment level

    Science.gov (United States)

    Sharma, Arabinda; Tiwari, K. N.

    2014-11-01

    The Shuttle Radar Topography Mission (SRTM) data has emerged as a global elevation data in the past one decade because of its free availability, homogeneity and consistent accuracy compared to other global elevation dataset. The present study explores the consistency in hydrological behavior of the SRTM digital elevation model (DEM) with reference to easily available regional 20 m contour interpolated DEM (TOPO DEM). Analysis ranging from simple vertical accuracy assessment to hydrological simulation of the studied Maithon catchment, using empirical USLE model and semidistributed, physical SWAT model, were carried out. Moreover, terrain analysis involving hydrological indices was performed for comparative assessment of the SRTM DEM with respect to TOPO DEM. Results reveal that the vertical accuracy of SRTM DEM (±27.58 m) in the region is less than the specified standard (±16 m). Statistical analysis of hydrological indices such as topographic wetness index (TWI), stream power index (SPI), slope length factor (SLF) and geometry number (GN) shows a significant differences in hydrological properties of the two studied DEMs. Estimation of soil erosion potentials of the catchment and conservation priorities of microwatersheds of the catchment using SRTM DEM and TOPO DEM produce considerably different results. Prediction of soil erosion potential using SRTM DEM is far higher than that obtained using TOPO DEM. Similarly, conservation priorities determined using the two DEMs are found to be agreed for only 34% of microwatersheds of the catchment. ArcSWAT simulation reveals that runoff predictions are less sensitive to selection of the two DEMs as compared to sediment yield prediction. The results obtained in the present study are vital to hydrological analysis as it helps understanding the hydrological behavior of the DEM without being influenced by the model structural as well as parameter uncertainty. It also reemphasized that SRTM DEM can be a valuable dataset for

  4. Follow-up radiographs of the cervical spine after anterior fusion with titanium intervertebral disc; Roentgen-Verlaufsuntersuchung der Halswirbelsaeule nach anteriorer Fusion mit Titaninterponaten

    Energy Technology Data Exchange (ETDEWEB)

    Biederer, J; Hutzelmann, A; Heller, M [Kiel Univ. (Germany). Klinik fuer Diagnostische Radiologie; Rama, B [Paracelsus Klinik, Osnabrueck (Germany). Klinik fuer Neurochirurgie

    1999-08-01

    Purpose: We examined the postoperative changes of the cervical spine after treatment of cervical nerve root compression with anterior cervical discectomy and fusion with a new titanium intervertebral disc. Patients and Methods: 37 patients were examined prior to, as well as 4 days, 6 weeks, and 7 months after surgery. Lateral view X-rays and functional imaging were used to evaluate posture and mobility of the cervical spine, the position of the implants, and the reactions of adjacent bone structures. Results: Implantation of the titanium disc led to post-operative distraction of the intervertebral space and slight lordosis. Within the first 6 months a slight loss of distraction and re-kyphosis due to impression of the implants into the vertebral end-plates were found in all patients. We noted partial infractions into the vertebral end-plates in 10/42 segments and slight mobility of the implants in 14/42 segments. Both groups of patients showed reactive spondylosis and local symptoms due to loosening of the implants. The pain subsided after onset of bone bridging and stable fixation of the loosened discs. Conclusions: The titanium intervertebral disc provides initial distraction of the fusioned segments with partial recurrence of kyphosis during the subsequent course. Loosening of the implants with local symptoms can be evaluated with follow-up X-rays and functional imaging. (orig.) [German] Ziel: An Patienten mit zervikalen Kompressionssyndromen wurden Stellung und Funktion der Halswirbelsaeule nach Diskektomie und Fusion mit einem neuartigen Titaninterponat untersucht. Patienten und Methoden: Bei 37 Patienten (42 Segmente) wurden praeoperativ sowie 4 Tage, 6 Wochen und 7 Monate postoperativ mit seitlichen Uebersichts- und Funktionsaufnahmen Stellung und Mobilitaet der HWS beurteilt. Erfasst wurden Lageveraenderungen des Titaninterponates und die Reaktion der angrenzenden Wirbelkoerperabschlussplatten. Ergebnisse: Das Titaninterponat bewirkte postoperativ eine

  5. Diagnosis and therapy of dysfunctions of human leukocytes after irradiation. Final report; Diagnose und Therapie von Funktionsstoerungen menschlicher Leukozyten nach Bestrahlung. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Beuningen, D. van; Kaffenberger, W. [Sanitaetsakademie der Bundeswehr, Muenchen (Germany); Baaske, C.; Leipert, D.

    1999-08-01

    Immunkomplexe bzw. Phorbolester) aktiviert die NADPH-Oxidase auf parallel verlaufenden Signaltransduktionskaskaden, die in einer Aktivierung von Proteinkinase C-Isoenzymen zusammenlaufen. Einzelne Enzyme der Kaskaden wurden mittels pharmakologischer Inhibitoren in Verbindung mit dem 'Western'-Verfahren identifiziert, Lipid-'2{sup nd}-messenger' durch HPLC-Analyse. Die Daten weisen auf ein aeusserst komplexes System mit Quervernetzungen, Rueckkopplungen und Parallelschaltungen bei der Aktivierung der NADPH-Oxidase hin. Sie identifizieren erstmals mehrere zytoplasmatische/membranstaendige Elemente von Signaltransduktionskaskaden als strahlenempfindlich, die eine moegliche Basis fuer kausal-orientierte Therapieansaetze und eine Erklaerung fuer Immundefekte nach Bestrahlung bieten. (orig.)

  6. Modified double contrast-enhanced examination of the stomach of adipose patients after vertical gastroplasty; Modifizierte Doppelkontrast-Untersuchung des Magens bei adipoesen Patienten nach vertikaler Gastroplastie

    Energy Technology Data Exchange (ETDEWEB)

    Raissaki, M.T. [Institut fuer Bildgebende Diagnostik, Universitaetsklinik Heraklion (Greece); Prassopoulos, P. [Institut fuer Bildgebende Diagnostik, Universitaetsklinik Heraklion (Greece); Hatjidakis, A.A. [Institut fuer Bildgebende Diagnostik, Universitaetsklinik Heraklion (Greece); Christodoulakis, M. [Klinik fuer Chirurgische Onkologie der Universitaetsklinik Heraklion (Greece); Melissas, J. [Klinik fuer Chirurgische Onkologie der Universitaetsklinik Heraklion (Greece); Gourtsoyiannis, N.C. [Institut fuer Bildgebende Diagnostik, Universitaetsklinik Heraklion (Greece)

    1995-11-01

    The study reported covers 28 patients who were examined once by radiology before surgery, and twice after surgery. The first post-surgery examination was done on days 5-7, the second during the 4th until 6th month after surgery. For the first examination, water-soluble contrast agent was initially applied, then barium containing contrast agent. The second examination was done by modified double contrast technique. The most frequent, pre-surgery findings revealed gastro-esophageal reflux in 13 patients. The first post-surgery control detected a somastenosis in 2 patients, while the second control examination detected complications of various nature in 11 patients and gastro-esophageal reflux in 5 patients. In 6 patients, discrepancy between clinical and radiological findings was stated. The pouch size did not correlate with the frequency of complications, or with the body-to-mass index decrease. The examination method proposed in this article yields pre-surgery information on the anatomy of the stomach, more accurate dewscription of post-surgery complications, and better evaluation of the antireflux effect of the vertical gastroplasty. (orig.) [Deutsch] In der Studie wurden 28 Patienten einmal praeoperativ und zweimal postoperativ roentgenologisch kontrolliert. Die erste postoperative Kontrolle fand am 5.-7. Tag und die zweite im 4.-6. Monat nach dem Eingriff statt. Bei der ersten Kontrolle wurde zuerst wasserloesliches und anschliessend bariumhaltiges Kontrastmittel benutzt, waehrend bei der zweiten Kontrolle eine modifizierte Doppelkontrast-Untersuchung durchgefuehrt wurde. Der haeufigste praeoperative Befund war der gastrooesophageale Reflux bei 13 Patienten. Bei der ersten praeoperativen Kontrolle fand sich bei 2 Patienten eine Stomastenose, waehrend bei der zweiten verschiedene Komplikationen bei 11 sowie gastrooesophagealer Reflux bei 5 Patienten vorlagen. Eine Diskrepanz zwischen radiologischen und klinischen Befunden fanden wir bei 6 Patienten. Die

  7. DEM analysis of FOXSI-2 microflare using AIA observations

    Science.gov (United States)

    Athiray Panchapakesan, Subramania; Glesener, Lindsay; Vievering, Juliana; Camilo Buitrago-Casas, Juan; Christe, Steven; Inglis, Andrew; Krucker, Sam; Musset, Sophie

    2017-08-01

    The second flight of Focusing Optics X-ray Solar Imager (FOXSI) sounding rocket experiment was successfully completed on 11 December 2014. FOXSI makes direct imaging and spectral observation of the Sun in hard X-rays using grazing incidence optics modules which focus X-rays onto seven focal plane detectors kept at a 2m distance, in the energy range 4 to 20 keV, to study particle acceleration and coronal heating. Significant HXR emissions were observed by FOXSI during microflare events with A0.5 and A2.5 class, as classified by GOES, that occurred during FOXSI-2 flight.Spectral analysis of FOXSI data for these events indicate presence of plasma at higher temperatures (>10MK). We attempt to study the plasma content in the corona at different temperatures, characterized by the differential emission measure (DEM), over the FOXSI-2 observed flare regions using the Atmospheric Imaging Assembly (SDO/AIA) data. We utilize AIA observations in different EUV filters that are sensitive to ionized iron lines, to determine the DEM by using a regularized inversion method. This poster will show the properties of hot plasma as derived from FOXSI-2 HXR spectra with supporting DEM analysis using AIA observations.

  8. THE GLOBAL TANDEM-X DEM: PRODUCTION STATUS AND FIRST VALIDATION RESULTS

    Directory of Open Access Journals (Sweden)

    M. Huber

    2012-07-01

    Full Text Available The TanDEM-X mission will derive a global digital elevation model (DEM with satellite SAR interferometry. Two radar satellites (TerraSAR-X and TanDEM-X will map the Earth in a resolution and accuracy with an absolute height error of 10m and a relative height error of 2m for 90% of the data. In order to fulfill the height requirements in general two global coverages are acquired and processed. Besides the final TanDEM-X DEM, an intermediate DEM with reduced accuracy is produced after the first coverage is completed. The last step in the whole workflow for generating the TanDEM-X DEM is the calibration of remaining systematic height errors and the merge of single acquisitions to 1°x1° DEM tiles. In this paper the current status of generating the intermediate DEM and first validation results based on GPS tracks, laser scanning DEMs, SRTM data and ICESat points are shown for different test sites.

  9. Das Répertoire International des Sources Musicales (RISM nach Fünfzig Jahren

    Directory of Open Access Journals (Sweden)

    Heckmann, Harald

    2001-12-01

    Full Text Available In 1952, a Commission Mixte formed by members of the International Musicological Society (IMS and the International Association of Music Libraries (lAML constituted in Paris the Répertoire International des Sources Musicales (RISM. In 1971, the first two volumes appeared - the Écrits imprimés concernant la musique edited by François Lesure. In 1960, a central editorial office (Zentralredaktion was founded in Kassel for the Series of the Einzeldrucke vor 1800/Single Prints before 1800. Consisting of 13 volumes, this is now complete with the exception of an index. Since moving to Frankfurt am Main in 1987, the Zentralredaktion has concentrated its work on the Handschriften nach 1600/Manuscripts after 1600. Because of its scope, this project presented RISM with an enormous challenge and, therefore, digitalization was a very early priority. In 1995, the first CD-ROM with the RISM manuscript database appeared followed each year by a cumulative edition; the sixth CD appeared at the end of 2000 containing about 350,000 entries from 575 libraries in 31 countries. Looking at what has been achieved in the last 50 years and taking into account the Series of special catalogs, now expanded to 29 printed volumes, the result deserves respect. There are, however, gaps. These include the fact that in some countries with an especially rich tradition, sources not yet accessible will have to be integrated into the RISM catalog. Spain is such a country and F. Gonzalez Valle has rendered great service in making these sources accessible. His pupils and successors are called upon to mobilize all forces so that within the international RISM community Spain takes up the place appropriate to its past and present rich musical culture.[de] 1952 konstituierte eine Commission Mixte aus Mitgliedern der Internationalen Gesellschaft fur Musikwissenschaft (IGMW und der Internationalen Vereinigung der Musikbibliotheken (IVMB in Paris das Répertoire International des Sources

  10. Morphologische Veränderung des Beckenbodens und klinisches Outcome nach Resektionsrektopexie bei Beckenbodeninsuffizienz : Eine explorative, deskriptive Studie anhand der dynamischen Beckenboden-MRT

    OpenAIRE

    Busse, Anika

    2013-01-01

    Der Beckenboden und insbesondere die Beckenbodeninsuffizienz mit ihren Folgeerkrankungen wie anale Inkontinenz und Obstipationen sind nach wie vor ein Tabuthema. Aufgrund der steigenden Prävalenz, der damit verbundenen steigenden Kosten für das Gesundheitssystem und aufgrund der deutlichen Beeinflussung der Lebensqualität ist es wichtig effektive diagnostische Möglichkeiten und Therapien zu besitzen. Ziel dieser vorliegenden Studie sollte es somit sein das Outcome nach Resektionsrektopexie be...

  11. Modelling above Ground Biomass in Tanzanian Miombo Woodlands Using TanDEM-X WorldDEM and Field Data

    Directory of Open Access Journals (Sweden)

    Stefano Puliti

    2017-09-01

    Full Text Available The use of Interferometric Synthetic Aperture Radar (InSAR data has great potential for monitoring large scale forest above ground biomass (AGB in the tropics due to the increased ability to retrieve 3D information even under cloud cover. To date; results in tropical forests have been inconsistent and further knowledge on the accuracy of models linking AGB and InSAR height data is crucial for the development of large scale forest monitoring programs. This study provides an example of the use of TanDEM-X WorldDEM data to model AGB in Tanzanian woodlands. The primary objective was to assess the accuracy of a model linking AGB with InSAR height from WorldDEM after the subtraction of ground heights. The secondary objective was to assess the possibility of obtaining InSAR height for field plots when the terrain heights were derived from global navigation satellite systems (GNSS; i.e., as an alternative to using airborne laser scanning (ALS. The results revealed that the AGB model using InSAR height had a predictive accuracy of R M S E = 24.1 t·ha−1; or 38.8% of the mean AGB when terrain heights were derived from ALS. The results were similar when using terrain heights from GNSS. The accuracy of the predicted AGB was improved when compared to a previous study using TanDEM-X for a sub-area of the area of interest and was of similar magnitude to what was achieved in the same sub-area using ALS data. Overall; this study sheds new light on the opportunities that arise from the use of InSAR data for large scale AGB modelling in tropical woodlands.

  12. Abscesses after appendectomy due to intraoperative loss of fecaliths; Abszesse nach Appendektomie durch intraoperativ verlorene Appendicolithen

    Energy Technology Data Exchange (ETDEWEB)

    Hoermann, M.; Kreuzer, S. [Universitaetsklinik fuer Radiodiagnostik, Vienna (Austria). Abt. chirurgische Faecher; Sacher, P. [UniversitaetsSpital Zuerich (Switzerland). Abt. Kinderchirurgie; Eich, G.F. [UniversitaetsSpital Zuerich (Switzerland). Inst. fuer Diagnostische Radiologie

    2001-08-01

    Objective: Fecaliths appear to predispose a patient to acute appendicitis, abscess formation, and perforation. The number of preoperative radiological evaluations is increasing, although children with suspected perforation still undergo surgery immediately. We report and discuss imaging findings and implications in children with acute appendicitis and fecalithis. Methods: Four children (3 girls, 1 boy; mean age 9 years) underwent surgery for acute appendicitis. Three children underwent sonography and plain radiography before surgery, 1 child was operated without radiological evaluation. After readmission, all 4 children underwent sonography and plain radiography before surgery. Results: In 3 patients a fecalith was diagnosed initially. After uneventful recovery all 4 patients had acute abdominal pain and readmission was necessary. In all 4 patients the escaped fecalith was demonstrated with sonography and plain radiography confirmed surgically. Conclusion: Discussion about the role of imaging in acute appendicitis has concentrated on the diagnostic yield of cross-section techniques. The importance of demonstrating a fecalith, prompting a more thorough intraoperative search has found little attention. The radiologist should also detect and localize a fecalith and should be aware of retained fecaliths as a cause of abscess formation after appendectomy. (orig.) [German] Ziel: Faekolithen praedisponieren Kinder zu akuter Appendizitis und fuehren vermehrt zu Perforation und Abszessen. Wir berichten und diskutieren die Bedeutung der Bildgebung bei Kindern mit Faekolithen und perforierter akuter Appendizitis. Methoden: 4 Kinder (drei Maedchen, ein Junge, Altersmeridian 9 Jahre) wurden wegen perforierter akuter Appendizitis operiert. Drei Kinder erhielten praeoperativ eine Ultraschalluntersuchung und ein Abdomen-Uebersichtsbild. Nach Neuaufnahme wurden nun bei allen Kindern eine Ultraschalluntersuchung und ein Abdomen-Uebersichtsbild angefertigt und neuerlich operiert

  13. Der Meteorologe : (aus dem Band "V". Tallinn 1998) / Elo Viiding ; aus dem Estnischen von Gisbert Jänicke

    Index Scriptorium Estoniae

    Viiding, Elo, 1974-

    2002-01-01

    Sisu : Die Möglichkeit des Meteorologen = Meteoroloogi võimalikkusest ; "Der Meteorologe kam 1990 in die Stadt..." = "Meteoroloog saabus linna aastal 1990..." ; "Was wäre dir "Arbeit" des Meteorologen..." = "Mis oleks meteoroloogi töö..." ; "Und ein Unglück für den Meteorologen ist es auch..." = "Ja Meteoroloogi õnnetus on veel see..." ; Angst vor dem Altwerden des Meteorologen = Hirm Meteoroloogi vanakssaamise ees ; Fest. Geschenk = Pidu. Kink ; "Wenn der Meteorologe eine Grösse sieht, ist er darüber..." = "Kui meteoroloog näeb suurust, on ta selle kohal..." ; Der Meteorologe wird im Saal erwartet = Meteoroloogi oodatakse saali ; "Das Abkommen mit der Meteorologenerwartung kündigen..." = "Katkestada leping meteoroloogiootusega..." ; "Die "Wege des Herrn" sind der Meteorologe..." = "Looja tee" on Meteoroloog..." ; Von dem Fremden, der im Saal den Meteorologen traf = Võõra lugu, kes Meteoroloogi saalis kohtas ; "Den Fremden hervorzuhusten, der von dem..." = "Köhida enesest välja võõras, kes tahtis teha..." ; Der Fremde beruhigt sich nicht = Võõras ei jää rahule

  14. Narrative Expositionstherapie (NET) für Menschen nach Gewalt und Flucht : Ein Einblick in das Verfahren

    OpenAIRE

    Schauer, Maggie; Elbert, Thomas; Neuner, Frank

    2017-01-01

    Die Narrative Expositionstherapie (NET) ist ein effizientes Kernelement der Behandlung von Kindern und Erwachsenen, die unter den Folgen von Mehrfach- und Komplextraumatisierung nach Gewalt und Flucht leiden. Die chronologische Erarbeitung einer Narration, der individuellen Lebensgeschichte in der NET ermöglicht Traumaüberlebenden eine Gesamtschau ihres Lebens und so die Integration der Lebenserfahrungen in den biografischen Zusammenhang. Sie aktiviert Ressourcen und erlaubt korrigierende Bez...

  15. [Julia Rosche. Zwischen den Fronten. Die Rolle Estlands zwischen dem Hitler-Stalin-Pakt und dem Ende des Zweiten Weltkriegs im internationalen Kontext] / Olaf Mertelsmann

    Index Scriptorium Estoniae

    Mertelsmann, Olaf, 1969-

    2014-01-01

    Arvustus: Rosche, Julia. Zwischen den Fronten. Die Rolle Estlands zwischen dem Hitler-Stalin-Pakt und dem Ende des Zweiten Weltkriegs im internationalen Kontext. Diplomica Verlag. Hamburg 2012. Unter demselben Titel mit identischem Text auch: Grin Verlag. München 2013

  16. The legal compatibility of the German Act for mandatory use of electricity from renewables (Stromeinspeisungsgesetz) with the Treaty of Rome; Die Vereinbarkeit des Stromeinspeisungsgesetzes mit dem EG-Vertrag

    Energy Technology Data Exchange (ETDEWEB)

    Iro, S.P.

    1998-04-01

    In force since 1990, the German Stromeinspeisungsgesetz (obliging electric utilities to purchase at mandatory prices electricity from renewable energy sources) still is an issue of debates about legal justification under German law and compatibility with legislation on the European Internal Market for elctricity. The contribution analyses the points of friction with the Treaty of Rome, in particular the European regulations governing subsidization of national industries or undertakings by their government, aspects of freedom of trade within the EU and restrictive trade practices law. The conclusion of the legal analysis is that the German act is compatible with the subsidy regulations of the EU, but calls for amendment to correct infringements of the principles of free trade and competition within the EU in the provisions excluding electricity from renewables generated in other EU Member States. (CB) [Deutsch] Es ist schon seit 1990 in Kraft, und das Stromeinspeisungsgesetz bietet nach wie vor Anlass zu Diskussionen, sowohl aus dem Blickwinkel des deutschen Rechts wie auch vom Standpunkt des EGV. Der Beitrag konzentriert sich auf die rechtlichen Reibungspunkte mit europaeischem Recht, konkret die Regelungen ueber erlaubte staatliche Beihilfen an nationale Unternehmen, deren Abgrenzung zu allgemein wirtschaftspolitischen Massnahmen eines Staates und Aspekte der Warenverkehrsfreiheit und des Wettbewerbs auf dem europaeischen Binnenmarkt. Das Ergebnis der rechtlichen Analyse des Beitrags sieht in der Subventionierung der Stromerzeugung aus erneuerbaren Energien eine politische Entscheidung, die mit EG-Interessen und EG-Recht vereinbar ist. Das Gesetz verstosse jedoch gegen die Warenverkehrsfreieheit auf dem Binnenmarkt in den Regelungen, wo es entsprechend erzeugten Strom aus anderen Mitgliedslaendern von der Subventionierung ausnimmt. (orig./CB)

  17. Research on a dem Coregistration Method Based on the SAR Imaging Geometry

    Science.gov (United States)

    Niu, Y.; Zhao, C.; Zhang, J.; Wang, L.; Li, B.; Fan, L.

    2018-04-01

    Due to the systematic error, especially the horizontal deviation that exists in the multi-source, multi-temporal DEMs (Digital Elevation Models), a method for high precision coregistration is needed. This paper presents a new fast DEM coregistration method based on a given SAR (Synthetic Aperture Radar) imaging geometry to overcome the divergence and time-consuming problem of the conventional DEM coregistration method. First, intensity images are simulated for two DEMs under the given SAR imaging geometry. 2D (Two-dimensional) offsets are estimated in the frequency domain using the intensity cross-correlation operation in the FFT (Fast Fourier Transform) tool, which can greatly accelerate the calculation process. Next, the transformation function between two DEMs is achieved via the robust least-square fitting of 2D polynomial operation. Accordingly, two DEMs can be precisely coregistered. Last, two DEMs, i.e., one high-resolution LiDAR (Light Detection and Ranging) DEM and one low-resolution SRTM (Shutter Radar Topography Mission) DEM, covering the Yangjiao landslide region of Chongqing are taken as an example to test the new method. The results indicate that, in most cases, this new method can achieve not only a result as much as 80 times faster than the minimum elevation difference (Least Z-difference, LZD) DEM registration method, but also more accurate and more reliable results.

  18. Research on the method of extracting DEM based on GBInSAR

    Science.gov (United States)

    Yue, Jianping; Yue, Shun; Qiu, Zhiwei; Wang, Xueqin; Guo, Leping

    2016-05-01

    Precise topographical information has a very important role in geology, hydrology, natural resources survey and deformation monitoring. The extracting DEM technology based on synthetic aperture radar interferometry (InSAR) obtains the three-dimensional elevation of the target area through the phase information of the radar image data. The technology has large-scale, high-precision, all-weather features. By changing track in the location of the ground radar system up and down, it can form spatial baseline. Then we can achieve the DEM of the target area by acquiring image data from different angles. Three-dimensional laser scanning technology can quickly, efficiently and accurately obtain DEM of target area, which can verify the accuracy of DEM extracted by GBInSAR. But research on GBInSAR in extracting DEM of the target area is a little. For lack of theory and lower accuracy problems in extracting DEM based on GBInSAR now, this article conducted research and analysis on its principle deeply. The article extracted the DEM of the target area, combined with GBInSAR data. Then it compared the DEM obtained by GBInSAR with the DEM obtained by three-dimensional laser scan data and made statistical analysis and normal distribution test. The results showed the DEM obtained by GBInSAR was broadly consistent with the DEM obtained by three-dimensional laser scanning. And its accuracy is high. The difference of both DEM approximately obeys normal distribution. It indicated that extracting the DEM of target area based on GBInSAR is feasible and provided the foundation for the promotion and application of GBInSAR.

  19. Theoretical and experimental studies on the improvement of the time structure of the extracted electron beam from the stretcher ring ELSA; Theoretische und experimentelle Untersuchungen zur Verbesserung der Zeitstruktur des extrahierten Elektronenstrahls aus dem Stretcherring ELSA

    Energy Technology Data Exchange (ETDEWEB)

    Neckenig, M.

    1993-03-01

    The Electron Stretcher Accelerator ELSA of Bonn University is the first electron-pulse-stretcher-ring in the GeV-range. It delivers an external electron beam in the energy range from 500 MeV to 3.5 GeV, with a current between 10 pA and 100 nA, depending on the demands of the experiments. A synchrotron is used to preaccelerate the electrons to energies between 500 MeV and 1.8 GeV. In this energy-range, ELSA is used in the pure stretcher-mode, whereas for higher energies it is used as a post accelerator. For beam extraction, a third-integer resonance, driven by sextupoles, is applied. The problems, delimiting the duty-factor of the extracted beam in the pure stretcher-mode, have been investigated and solved. In this mode, duty-factors - measured by coincidence methods - of up to 55% have been reached, which are of the order of the theoretical limit for the applied extraction method of about 60%. (orig.) [Deutsch] Ziel dieser Arbeit war es, die Phaenomene, die das Tastverhaeltnis des aus ELSA extrahierten Strahles beeinflussen, zu verstehen. Aus dem gewonnenen Verstaendnis heraus sollten Massnahmen getroffen werden, um das Tastverhaeltnis zu verbessern. Die Effekte, die ein gutes Tastverhaeltnis in der Vergangenheit verhindert haben, waren in der Hauptsache ein Stromrippel in den Netzgeraeten der Hauptmagnete sowie die Extraktion aus dem Synchrotron, die nur eine schlechte Fuellung von ELSA erlaubte. Der Rippel wurde durch den Einbau von Filtern in die Netzgeraete behoben. Bei den gegenwaertigen Extraktionszeiten von 20 msec spielt der Rippel nur noch eine geringe Rolle. Die Extraktion aus dem Synchrotron wurde modifiziert, so dass ohne Beschaffung neuer Komponenten eine Verbesserung der ELSA-Fuellung von 40% auf maximal 75% moeglich wurde. Durch eine Reihe von Massnahmen konnte der Wert des Tastverhaeltnisses von 6%-7% kurz nach der Inbetriebnahme auf heute 50%-55% gesteigert werden. Die Extraktion kann durch ein einfaches Modell beschrieben werden, dass alle

  20. "Doing pupil" nach Schulschluss – Videografie an einer Kinderuniversität

    Directory of Open Access Journals (Sweden)

    Alexandra König

    2015-03-01

    Full Text Available Auf der Basis einer Videografie an einer Kinderuniversität wird in dem vorliegenden Beitrag die Frage verfolgt, wie an einem außerschulischen Lernort generationale Ordnung hergestellt wird und welche Gestalt diese annimmt. Als heuristischer Rahmen dient das Modell der "Sozialisation als generationales Ordnen" (BÜHLER-NIEDERBERGER 2011; BÜHLER-NIEDERBERGER & TÜRKYILMAZ 2014. Die Analyse der ersten Sitzungen von zwei kontrastiven Kursen an der Kinder- und Jugenduniversität zeigt erstens, wie Kinder struktursensitiv Regeln in dem unbekannten Kontext erspüren, erarbeiten und modifizieren, wie sie KomplizInnen in der Herstellung generationaler Ordnung sind. Zweitens wird die Dominanz der schulischen Ordnung und des SchülerInnenstatus für Kindheit deutlich. Die Kinder stellen "Schule" her – paradoxerweise auch in einem außerschulischen Kontext. Drittens wird im kontrastiven Vergleich der untersuchten Kurse eine Varianz dieser Ordnungen – in Bezug auf die Form des Wissens und Adressierung der Kinder – herausgearbeitet, die allerdings die Dominanz der schulischen Ordnung nicht bricht. URN: http://nbn-resolving.de/urn:nbn:de:0114-fqs150263

  1. A coupled DEM-CFD method for impulse wave modelling

    Science.gov (United States)

    Zhao, Tao; Utili, Stefano; Crosta, GiovanBattista

    2015-04-01

    Rockslides can be characterized by a rapid evolution, up to a possible transition into a rock avalanche, which can be associated with an almost instantaneous collapse and spreading. Different examples are available in the literature, but the Vajont rockslide is quite unique for its morphological and geological characteristics, as well as for the type of evolution and the availability of long term monitoring data. This study advocates the use of a DEM-CFD framework for the modelling of the generation of hydrodynamic waves due to the impact of a rapid moving rockslide or rock-debris avalanche. 3D DEM analyses in plane strain by a coupled DEM-CFD code were performed to simulate the rockslide from its onset to the impact with still water and the subsequent wave generation (Zhao et al., 2014). The physical response predicted is in broad agreement with the available observations. The numerical results are compared to those published in the literature and especially to Crosta et al. (2014). According to our results, the maximum computed run up amounts to ca. 120 m and 170 m for the eastern and western lobe cross sections, respectively. These values are reasonably similar to those recorded during the event (i.e. ca. 130 m and 190 m respectively). In these simulations, the slope mass is considered permeable, such that the toe region of the slope can move submerged in the reservoir and the impulse water wave can also flow back into the slope mass. However, the upscaling of the grains size in the DEM model leads to an unrealistically high hydraulic conductivity of the model, such that only a small amount of water is splashed onto the northern bank of the Vajont valley. The use of high fluid viscosity and coarse grain model has shown the possibility to model more realistically both the slope and wave motions. However, more detailed slope and fluid properties, and the need for computational efficiency should be considered in future research work. This aspect has also been

  2. 3D DEM analyses of the 1963 Vajont rock slide

    Science.gov (United States)

    Boon, Chia Weng; Houlsby, Guy; Utili, Stefano

    2013-04-01

    The 1963 Vajont rock slide has been modelled using the distinct element method (DEM). The open-source DEM code, YADE (Kozicki & Donzé, 2008), was used together with the contact detection algorithm proposed by Boon et al. (2012). The critical sliding friction angle at the slide surface was sought using a strength reduction approach. A shear-softening contact model was used to model the shear resistance of the clayey layer at the slide surface. The results suggest that the critical sliding friction angle can be conservative if stability analyses are calculated based on the peak friction angles. The water table was assumed to be horizontal and the pore pressure at the clay layer was assumed to be hydrostatic. The influence of reservoir filling was marginal, increasing the sliding friction angle by only 1.6˚. The results of the DEM calculations were found to be sensitive to the orientations of the bedding planes and cross-joints. Finally, the failure mechanism was investigated and arching was found to be present at the bend of the chair-shaped slope. References Boon C.W., Houlsby G.T., Utili S. (2012). A new algorithm for contact detection between convex polygonal and polyhedral particles in the discrete element method. Computers and Geotechnics, vol 44, 73-82, doi.org/10.1016/j.compgeo.2012.03.012. Kozicki, J., & Donzé, F. V. (2008). A new open-source software developed for numerical simulations using discrete modeling methods. Computer Methods in Applied Mechanics and Engineering, 197(49-50), 4429-4443.

  3. Optimization of Particle Search Algorithm for CFD-DEM Simulations

    Directory of Open Access Journals (Sweden)

    G. Baryshev

    2013-09-01

    Full Text Available Discrete element method has numerous applications in particle physics. However, simulating particles as discrete entities can become costly for large systems. In time-driven DEM simulation most computation time is taken by contact search stage. We propose an efficient collision detection method which is based on sorting particles by their coordinates. Using multiple sorting criteria allows minimizing number of potential neighbours and defines fitness of this approach for simulation of massive systems in 3D. This method is compared to a common approach that consists of placing particles onto a grid of cells. Advantage of the new approach is independence of simulation parameters upon particle radius and domain size.

  4. Der antiskeptische Boden unter dem Gehirn im Tank

    OpenAIRE

    Müller, Olaf L.

    2001-01-01

    Crispin Wright hat die bislang beste Rekonstruktion von Putnams Beweis gegen die skeptische Hypothese vom Gehirn im Tank vorgelegt. Aber selbst in Wrights Fassung hat der Beweis einen Mangel: Er wird mithilfe eines Prädikates wie z.B. "Tiger" geführt und funktioniert nur, wenn man sich darauf verlassen kann, dass es Tiger wirklich gibt. Aber die Skeptikerin bestreitet, über die Existenz von Tigern bescheid zu wissen. Das Problem lässt sich dadurch beheben, dass man den Beweis – statt mit dem ...

  5. The Importance of Precise Digital Elevation Models (DEM) in Modelling Floods

    Science.gov (United States)

    Demir, Gokben; Akyurek, Zuhal

    2016-04-01

    Digital elevation Models (DEM) are important inputs for topography for the accurate modelling of floodplain hydrodynamics. Floodplains have a key role as natural retarding pools which attenuate flood waves and suppress flood peaks. GPS, LIDAR and bathymetric surveys are well known surveying methods to acquire topographic data. It is not only time consuming and expensive to obtain topographic data through surveying but also sometimes impossible for remote areas. In this study it is aimed to present the importance of accurate modelling of topography for flood modelling. The flood modelling for Samsun-Terme in Blacksea region of Turkey is done. One of the DEM is obtained from the point observations retrieved from 1/5000 scaled orthophotos and 1/1000 scaled point elevation data from field surveys at x-sections. The river banks are corrected by using the orthophotos and elevation values. This DEM is named as scaled DEM. The other DEM is obtained from bathymetric surveys. 296 538 number of points and the left/right bank slopes were used to construct the DEM having 1 m spatial resolution and this DEM is named as base DEM. Two DEMs were compared by using 27 x-sections. The maximum difference at thalweg of the river bed is 2m and the minimum difference is 20 cm between two DEMs. The channel conveyance capacity in base DEM is larger than the one in scaled DEM and floodplain is modelled in detail in base DEM. MIKE21 with flexible grid is used in 2- dimensional shallow water flow modelling. The model by using two DEMs were calibrated for a flood event (July 9, 2012). The roughness is considered as the calibration parameter. From comparison of input hydrograph at the upstream of the river and output hydrograph at the downstream of the river, the attenuation is obtained as 91% and 84% for the base DEM and scaled DEM, respectively. The time lag in hydrographs does not show any difference for two DEMs and it is obtained as 3 hours. Maximum flood extents differ for the two DEMs

  6. Local lysis with Alteplase for the treatment of acute embolic leg ischemia following the use of the Duett {sup trademark} closure device: preliminary results; Lokale Alteplase-Lyse zur Therapie der akuten embolischen Beinischaemie nach Einsatz des Duett {sup trademark} -Verschluss-Systems: vorlaeufige Ergebnisse

    Energy Technology Data Exchange (ETDEWEB)

    Schuermann, K.; Buecker, A.; Wingen, M.; Tacke, J.; Wein, B.; Guenther, R.W. [Klinik fuer Radiologische Diagnostik des Universitaetsklinikums der RWTH Aachen (Germany); Janssens, U. [Medizinische Klinik I (Kardiologie) des Universitaetsklinikums der RWTH Aachen (Germany)

    2004-04-01

    unter intravaskulaeren Ballonschutz der arteriellen Punktionsstelle in den Punktionskanal gespritzt wird. Bei 9 Patienten (0,64%) wurde das Prokoagulans unbemerkt in die Femoralarterie injiziert, und es trat eine akute Beinischaemie auf. Acht Patienten erhielten ueber einen kontralateralen femoralen Zugang eine lokale Alteplase-Lyse. Ein Patient wurde operiert. Im Mittel wurden 21 mg Alteplase (4-35 mg) in 14 h (4-21 h) appliziert. Der Verlauf der Lyse wurde angiographisch und klinisch kontrolliert. Die Patienten wurden nach 23 Monaten (4-35 Monaten) telefonisch befragt. Ergebnisse: Bei 3 Patienten war die Lyse vollstaendig, bei 5 Patienten verblieb wenig Restmaterial. In allen Faellen bildete sich die Ischaemiesymptomatik vollstaendig innerhalb der ersten Stunden nach Lysebeginn zurueck. In 5 Faellen trat waehrend der Lyse eine Blutung aus der mit dem Duett-System verschlossenen Punktionsstelle auf, in 2 Faellen mit Ausbildung eines falschen Aneurysmas. Dies fuehrte zum vorzeitigen Ende (n=2) oder zur Unterbrechung der Lyse (n=3). Alle Komplikationen wurden konservativ behandelt. Klinisch verblieben als Spaetfolgen bei 2 lysierten und dem operierten Patienten Par- und Hypaesthesien am Unterschenkel bzw. Fuss. (orig.)

  7. Aspects of vulnerable patients and informed consent in clinical trials [Aspekte schutzbedürftiger Patienten sowie der Einwilligung nach Aufklärung in klinischen Prüfungen

    Directory of Open Access Journals (Sweden)

    Hundt, Ferdinand

    2013-01-01

    freiwillige Einverständnis ist ein Eckpfeiler aller Regularien von klinischen Prüfungen. Einen Patienten in eine klinische Prüfung aufzunehmen, ohne zuvor die mit seiner Unterschrift versehene schriftliche Einverständnis eingeholt zu haben, ist als schwerwiegendes Fehlverhalten anzusehen. Die Entstehung ethischer Leitlinien begann bereits vor christlicher Zeitrechnung mit dem Hippokratischen Eid. In allen danach für die klinische Forschung entwickelten Leitlinien wird verdeutlicht, dass eine Hauptfunktion der Einwilligung nach Aufklärung die Sicherstellung der Willensfreiheit ist, um auch so das Wohl der Teilnehmer in klinischen Prüfungen sicherzustellen. Minderjährigen ist es nicht möglich ein diesbezüglich bindendes Einverständnis zu geben, dieses Problem wird durch eine Kombination von elterlicher Zustimmung sowie soweit möglich der Einwilligung des Minderjährigen adressiert. Analphabetismus ist betreffs der informierten Einwilligung ein kritischer Aspekt, der die ganze Welt betrifft. Er existiert in allen Gesellschaften, allen Bevölkerungsschichten und in jeder Altersgruppe. Um die Kommunikation mit diesen Patienten zu verbessern, können neue Strategien mittels Verwendung von Videotapes oder animierten Illustrationen und Trickfilmen gelehrt werden. Letztlich scheint die mit dem potentiellen Teilnehmer verbrachte Zeit der beste Weg zu sein, um die Verständigung zu verbessern.Schlussfolgerung: Die Erforschung lebensrettender und lebensverbessernder neuer Behandlungen erfordert eine Partnerschaft, die auf guter Kommunikation und Vertrauen zwischen Patienten und Forschern, Sponsoren, Ethikkommissionen, Behörden, Juristen und Politikern basiert, damit auch schutzbedürftige Patienten ohne Einschränkung von den Ergebnissen kontrollierter klinischer Prüfungen profitieren können.

  8. GPU based contouring method on grid DEM data

    Science.gov (United States)

    Tan, Liheng; Wan, Gang; Li, Feng; Chen, Xiaohui; Du, Wenlong

    2017-08-01

    This paper presents a novel method to generate contour lines from grid DEM data based on the programmable GPU pipeline. The previous contouring approaches often use CPU to construct a finite element mesh from the raw DEM data, and then extract contour segments from the elements. They also need a tracing or sorting strategy to generate the final continuous contours. These approaches can be heavily CPU-costing and time-consuming. Meanwhile the generated contours would be unsmooth if the raw data is sparsely distributed. Unlike the CPU approaches, we employ the GPU's vertex shader to generate a triangular mesh with arbitrary user-defined density, in which the height of each vertex is calculated through a third-order Cardinal spline function. Then in the same frame, segments are extracted from the triangles by the geometry shader, and translated to the CPU-side with an internal order in the GPU's transform feedback stage. Finally we propose a "Grid Sorting" algorithm to achieve the continuous contour lines by travelling the segments only once. Our method makes use of multiple stages of GPU pipeline for computation, which can generate smooth contour lines, and is significantly faster than the previous CPU approaches. The algorithm can be easily implemented with OpenGL 3.3 API or higher on consumer-level PCs.

  9. Effect of aging in HDPE blended with DEM in decalin

    International Nuclear Information System (INIS)

    Silva, P.; Albano, C.; Karam, A.; Vargas, M.G.; Perera, R.

    2006-01-01

    Electron paramagnetic resonance (EPR) was used to study the effect of aging on irradiated samples of high-density polyethylene (HDPE) blended with diethyl maleate (DEM) in different proportions. Initially, we synthesize the HDPE using bis-(cyclopentadienyl) zirconium dichloride and P-MAO. The functionalization of the synthesized HDPE was carried out in a 10% weight/vol of polyethylene in decalin solution using different percentages of diethyl maleate (5, 10, 15 and 30% in weight). The samples were irradiated at 5, 15 and 30 kGy. An exponential decay in the total free radicals concentration was observed in the pure HDPE sample at the 15 and 30 kGy irradiation doses, as it was expected. For the 15 and 30 kGy irradiation doses the HDPE blended with 15 and 30% of DEM in decalin shows an increase in the total free radical concentrations as the storage time is increased. This behavior has been interpreted in terms of trapped free radicals. (Author)

  10. Multi-scale sensitivity analysis of pile installation using DEM

    Science.gov (United States)

    Esposito, Ricardo Gurevitz; Velloso, Raquel Quadros; , Eurípedes do Amaral Vargas, Jr.; Danziger, Bernadete Ragoni

    2017-12-01

    The disturbances experienced by the soil due to the pile installation and dynamic soil-structure interaction still present major challenges to foundation engineers. These phenomena exhibit complex behaviors, difficult to measure in physical tests and to reproduce in numerical models. Due to the simplified approach used by the discrete element method (DEM) to simulate large deformations and nonlinear stress-dilatancy behavior of granular soils, the DEM consists of an excellent tool to investigate these processes. This study presents a sensitivity analysis of the effects of introducing a single pile using the PFC2D software developed by Itasca Co. The different scales investigated in these simulations include point and shaft resistance, alterations in porosity and stress fields and particles displacement. Several simulations were conducted in order to investigate the effects of different numerical approaches showing indications that the method of installation and particle rotation could influence greatly in the conditions around the numerical pile. Minor effects were also noted due to change in penetration velocity and pile-soil friction. The difference in behavior of a moving and a stationary pile shows good qualitative agreement with previous experimental results indicating the necessity of realizing a force equilibrium process prior to any load-test to be simulated.

  11. Optimizing digital elevation models (DEMs) accuracy for planning and design of mobile communication networks

    Science.gov (United States)

    Hassan, Mahmoud A.

    2004-02-01

    Digital elevation models (DEMs) are important tools in the planning, design and maintenance of mobile communication networks. This research paper proposes a method for generating high accuracy DEMs based on SPOT satellite 1A stereo pair images, ground control points (GCP) and Erdas OrthoBASE Pro image processing software. DEMs with 0.2911 m mean error were achieved for the hilly and heavily populated city of Amman. The generated DEM was used to design a mobile communication network resulted in a minimum number of radio base transceiver stations, maximum number of covered regions and less than 2% of dead zones.

  12. DEM Resolution Impact on the Estimation of the Physical Characteristics of Watersheds by Using SWAT

    Directory of Open Access Journals (Sweden)

    Waranyu Buakhao

    2016-01-01

    Full Text Available A digital elevation model (DEM is an important spatial input for automatic extraction of topographic parameters for the soil and water assessment tool (SWAT. The objective of this study was to investigate the impact of DEM resolution (from 5 to 90 m on the delineation process of a SWAT model with two types of watershed characteristics (flat area and mountain area and three sizes of watershed area (about 20,000, 200,000, and 1,500,000 hectares. The results showed that the total lengths of the streamline, main channel slope, watershed area, and area slope were significantly different when using the DEM datasets to delineate. Delineation using the SRTM DEM (90 m, ASTER DEM (30 m, and LDD DEM (5 m for all watershed characteristics showed that the watershed sizes and shapes obtained were only slightly different, whereas the area slopes obtained were significantly different. The total lengths of the generated streams increased when the resolution of the DEM used was higher. The stream slopes obtained using the small area sizes were insignificant, whereas the slopes obtained using the large area sizes were significantly different. This suggests that water resource model users should use the ASTER DEM as opposed to a finer resolution DEM for model input to save time for the model calibration and validation.

  13. Envolving the Operations of the TerraSAR-X/TanDEM-X Mission Planning System during the TanDEM-X Science Phase

    OpenAIRE

    Stathopoulos, Fotios; Guillermin, Guillaume; Garcia Acero, Carlos; Reich, Karin; Mrowka, Falk

    2016-01-01

    After the successful Global Coverage of the Digital Elevation Model, the TanDEM-X Science phase was initiated in September of 2014, dedicated to the demonstration of innovative techniques and experiments. The TanDEM-X Science phase had a large impact on the TerraSAR-X/TanDEM-X Mission Planning System. The two main challenges were the formation flying changes and the activation of a new acquisition mode, the so called Dual Receive Antenna (DRA) acquisition mode. This paper describes all action...

  14. Uncertainty of soil erosion modelling using open source high resolution and aggregated DEMs

    Directory of Open Access Journals (Sweden)

    Arun Mondal

    2017-05-01

    Full Text Available Digital Elevation Model (DEM is one of the important parameters for soil erosion assessment. Notable uncertainties are observed in this study while using three high resolution open source DEMs. The Revised Universal Soil Loss Equation (RUSLE model has been applied to analysis the assessment of soil erosion uncertainty using open source DEMs (SRTM, ASTER and CARTOSAT and their increasing grid space (pixel size from the actual. The study area is a part of the Narmada river basin in Madhya Pradesh state, which is located in the central part of India and the area covered 20,558 km2. The actual resolution of DEMs is 30 m and their increasing grid spaces are taken as 90, 150, 210, 270 and 330 m for this study. Vertical accuracy of DEMs has been assessed using actual heights of the sample points that have been taken considering planimetric survey based map (toposheet. Elevations of DEMs are converted to the same vertical datum from WGS 84 to MSL (Mean Sea Level, before the accuracy assessment and modelling. Results indicate that the accuracy of the SRTM DEM with the RMSE of 13.31, 14.51, and 18.19 m in 30, 150 and 330 m resolution respectively, is better than the ASTER and the CARTOSAT DEMs. When the grid space of the DEMs increases, the accuracy of the elevation and calculated soil erosion decreases. This study presents a potential uncertainty introduced by open source high resolution DEMs in the accuracy of the soil erosion assessment models. The research provides an analysis of errors in selecting DEMs using the original and increased grid space for soil erosion modelling.

  15. Comparative DEMS study on the electrochemical oxidation of carbon blacks

    DEFF Research Database (Denmark)

    Ashton, Sean James; Arenz, Matthias

    2012-01-01

    Publication year: 2012 Source:Journal of Power Sources, Volume 217 Sean J. Ashton, Matthias Arenz The intention of the study presented here is to compare the electrochemical oxidation tendencies of a pristine Ketjen Black EC300 high surface area (HSA) carbon black, and four graphitised counterparts...... heat-treated between 2100 and 3200 °C, such as those typically used as corrosion resistant carbon (CRC) supports for polymer electrolyte membrane fuel cell (PEMFC) catalysts. A methodology combining cyclic voltammetry (CV) and differential electrochemical mass spectrometry (DEMS) is used, which allows......; however, CRC samples graphitised =2800 °C did not exhibit this same behaviour. Highlights ¿ We quantitatively determine electrooxidation of carbon support materials. ¿ We can distinguish between the total and partial electrooxidation. ¿ Non or mildly heat treated carbon forms passivating layer. ¿ Heat...

  16. Pharmakobotanische Untersuchungen von Lavendelsorten auf dem Plattensee- Plateau

    Directory of Open Access Journals (Sweden)

    Tóth, Frida

    2014-09-01

    Full Text Available Auf dem Hof Dörgicsei Levendula Major GmbH wurden 9 Lavendelsorten (6 Sorten von Lavandula angustifolia und 3 Sorten von Lavandula x intermedia untersucht. Neben den morphologischen und Wachstumseigenschaften wurden auch Frisch- und Trockengewichte bewertet. Quantitative und qualitative Untersuchungen von den Blüten- und Ätherischöldrogen wurden auch durchgeführt. Die statistische Analyse zeigte signifikant höhere Erträge bei den Sorten L. angustifolia ’Essence Purple’ und L. x intermedia ’Edelweiss’. Gehalt und Zusammensetzung von ätherischem Öl war eindeutig bei der Sorte L. angustifolia ’Ellagance Purple’ am günstigsten.

  17. Inferring sediment connectivity from high-resolution DEMs of Difference

    Science.gov (United States)

    Heckmann, Tobias; Vericat, Damià

    2017-04-01

    Topographic changes due to the erosion and deposition of bedrock, sediments and soil can be measured by differencing Digital Elevation Models (DEM) acquired at different points in time. So-called morphological sediment budgets can be computed from such DEMs of Difference (DoD) on an areal rather than a point basis. The advent of high-resolution and highly accurate surveying techniques (e.g. LiDAR, SfM), together with recent advances of survey platforms (e.g. UaVs) provides opportunities to improve the spatial and temporal scale (in terms of extent and resolution), the availability and quality of such measurements. Many studies have used DoD to investigate and interpret the spatial pattern of positive and negative vertical differences in terms of erosion and deposition, or of horizontal movement. Vertical differences can be converted to volumes, and negative (erosion) and positive (deposition) volumetric changes aggregated for spatial units (e.g., landforms, hillslopes, river channels) have been used to compute net balances. We argue that flow routing algorithms common in digital terrain analysis provide a means to enrich DoD-based investigations with some information about (potential) sediment pathways - something that has been widely neglected in previous studies. Where the DoD indicates a positive surface change, flow routing delineates the upslope area where the deposited sediment has potentially been derived from. In the downslope direction, flow routing indicates probable downslope pathways of material eroded/detached/entrained where the DoD shows negative surface change. This material has either been deposited along these pathways or been flushed out of the area of investigation. This is a question of sediment connectivity, a property of a system (i.e. a hillslope, a sub-/catchment) that describes its potential to move sediment through itself. The sediment pathways derived from the DEM are related to structural connectivity, while the spatial pattern of (net

  18. Cross Validation on the Equality of Uav-Based and Contour-Based Dems

    Science.gov (United States)

    Ma, R.; Xu, Z.; Wu, L.; Liu, S.

    2018-04-01

    Unmanned Aerial Vehicles (UAV) have been widely used for Digital Elevation Model (DEM) generation in geographic applications. This paper proposes a novel framework of generating DEM from UAV images. It starts with the generation of the point clouds by image matching, where the flight control data are used as reference for searching for the corresponding images, leading to a significant time saving. Besides, a set of ground control points (GCP) obtained from field surveying are used to transform the point clouds to the user's coordinate system. Following that, we use a multi-feature based supervised classification method for discriminating non-ground points from ground ones. In the end, we generate DEM by constructing triangular irregular networks and rasterization. The experiments are conducted in the east of Jilin province in China, which has been suffered from soil erosion for several years. The quality of UAV based DEM (UAV-DEM) is compared with that generated from contour interpolation (Contour-DEM). The comparison shows a higher resolution, as well as higher accuracy of UAV-DEMs, which contains more geographic information. In addition, the RMSE errors of the UAV-DEMs generated from point clouds with and without GCPs are ±0.5 m and ±20 m, respectively.

  19. Dementia-free life expectancy (demFLE) in the Netherlands

    NARCIS (Netherlands)

    Perenboom, R.J.M.; Boshuizen, H.C.; Breteler, M.M.B.; Alewijn, O.; Water, H.P.A. van de

    1996-01-01

    To gain an insight into the burden of dementia in an aging society, life expectancy with dementia and its counterpart dementia-free life expectancy (DemFLE) in The Netherlands are presented. Sullivan's method was used to calculate DemFLE. For elderly living either independently or in homes for the

  20. INFLUENCE OF DEM IN WATERSHED MANAGEMENT AS FLOOD ZONATION MAPPING

    Directory of Open Access Journals (Sweden)

    M. Alrajhi

    2016-06-01

    Full Text Available Despite of valuable efforts from working groups and research organizations towards flood hazard reduction through its program, still minimal diminution from these hazards has been realized. This is mainly due to the fact that with rapid increase in population and urbanization coupled with climate change, flood hazards are becoming increasingly catastrophic. Therefore there is a need to understand and access flood hazards and develop means to deal with it through proper preparations, and preventive measures. To achieve this aim, Geographical Information System (GIS, geospatial and hydrological models were used as tools to tackle with influence of flash floods in the Kingdom of Saudi Arabia due to existence of large valleys (Wadis which is a matter of great concern. In this research paper, Digital Elevation Models (DEMs of different resolution (30m, 20m,10m and 5m have been used, which have proven to be valuable tool for the topographic parameterization of hydrological models which are the basis for any flood modelling process. The DEM was used as input for performing spatial analysis and obtaining derivative products and delineate watershed characteristics of the study area using ArcGIS desktop and its Arc Hydro extension tools to check comparability of different elevation models for flood Zonation mapping. The derived drainage patterns have been overlaid over aerial imagery of study area, to check influence of greater amount of precipitation which can turn into massive destructions. The flow accumulation maps derived provide zones of highest accumulation and possible flow directions. This approach provide simplified means of predicting extent of inundation during flood events for emergency action especially for large areas because of large coverage area of the remotely sensed data.

  1. Accuracy assessment of the global TanDEM-X Digital Elevation Model with GPS data

    Science.gov (United States)

    Wessel, Birgit; Huber, Martin; Wohlfart, Christian; Marschalk, Ursula; Kosmann, Detlev; Roth, Achim

    2018-05-01

    The primary goal of the German TanDEM-X mission is the generation of a highly accurate and global Digital Elevation Model (DEM) with global accuracies of at least 10 m absolute height error (linear 90% error). The global TanDEM-X DEM acquired with single-pass SAR interferometry was finished in September 2016. This paper provides a unique accuracy assessment of the final TanDEM-X global DEM using two different GPS point reference data sets, which are distributed across all continents, to fully characterize the absolute height error. Firstly, the absolute vertical accuracy is examined by about three million globally distributed kinematic GPS (KGPS) points derived from 19 KGPS tracks covering a total length of about 66,000 km. Secondly, a comparison is performed with more than 23,000 "GPS on Bench Marks" (GPS-on-BM) points provided by the US National Geodetic Survey (NGS) scattered across 14 different land cover types of the US National Land Cover Data base (NLCD). Both GPS comparisons prove an absolute vertical mean error of TanDEM-X DEM smaller than ±0.20 m, a Root Means Square Error (RMSE) smaller than 1.4 m and an excellent absolute 90% linear height error below 2 m. The RMSE values are sensitive to land cover types. For low vegetation the RMSE is ±1.1 m, whereas it is slightly higher for developed areas (±1.4 m) and for forests (±1.8 m). This validation confirms an outstanding absolute height error at 90% confidence level of the global TanDEM-X DEM outperforming the requirement by a factor of five. Due to its extensive and globally distributed reference data sets, this study is of considerable interests for scientific and commercial applications.

  2. OPEN-SOURCE DIGITAL ELEVATION MODEL (DEMs EVALUATION WITH GPS AND LiDAR DATA

    Directory of Open Access Journals (Sweden)

    N. F. Khalid

    2016-09-01

    Full Text Available Advanced Spaceborne Thermal Emission and Reflection Radiometer-Global Digital Elevation Model (ASTER GDEM, Shuttle Radar Topography Mission (SRTM, and Global Multi-resolution Terrain Elevation Data 2010 (GMTED2010 are freely available Digital Elevation Model (DEM datasets for environmental modeling and studies. The quality of spatial resolution and vertical accuracy of the DEM data source has a great influence particularly on the accuracy specifically for inundation mapping. Most of the coastal inundation risk studies used the publicly available DEM to estimated the coastal inundation and associated damaged especially to human population based on the increment of sea level. In this study, the comparison between ground truth data from Global Positioning System (GPS observation and DEM is done to evaluate the accuracy of each DEM. The vertical accuracy of SRTM shows better result against ASTER and GMTED10 with an RMSE of 6.054 m. On top of the accuracy, the correlation of DEM is identified with the high determination of coefficient of 0.912 for SRTM. For coastal zone area, DEMs based on airborne light detection and ranging (LiDAR dataset was used as ground truth data relating to terrain height. In this case, the LiDAR DEM is compared against the new SRTM DEM after applying the scale factor. From the findings, the accuracy of the new DEM model from SRTM can be improved by applying scale factor. The result clearly shows that the value of RMSE exhibit slightly different when it reached 0.503 m. Hence, this new model is the most suitable and meets the accuracy requirement for coastal inundation risk assessment using open source data. The suitability of these datasets for further analysis on coastal management studies is vital to assess the potentially vulnerable areas caused by coastal inundation.

  3. Antarctic 1 km Digital Elevation Model (DEM) from Combined ERS-1 Radar and ICESat Laser Satellite Altimetry

    Data.gov (United States)

    National Aeronautics and Space Administration — This data set provides a 1 km resolution Digital Elevation Model (DEM) of Antarctica. The DEM combines measurements from the European Remote Sensing Satellite-1...

  4. Original Product Resolution (OPR) Source Digital Elevation Models (DEMs) - USGS National Map 3DEP Downloadable Data Collection

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This data collection is the Original Product Resolution (OPR) Digital Elevation Model (DEM) as provided to the USGS. This DEM is delivered in the original...

  5. Sensitivity of Particle Size in Discrete Element Method to Particle Gas Method (DEM_PGM) Coupling in Underbody Blast Simulations

    Science.gov (United States)

    2016-06-12

    Particle Size in Discrete Element Method to Particle Gas Method (DEM_PGM) Coupling in Underbody Blast Simulations Venkatesh Babu, Kumar Kulkarni, Sanjay...buried in soil viz., (1) coupled discrete element & particle gas methods (DEM-PGM) and (2) Arbitrary Lagrangian-Eulerian (ALE), are investigated. The...DEM_PGM and identify the limitations/strengths compared to the ALE method. Discrete Element Method (DEM) can model individual particle directly, and

  6. Which DEM is best for analyzing fluvial landscape development in mountainous terrains?

    Science.gov (United States)

    Boulton, Sarah J.; Stokes, Martin

    2018-06-01

    Regional studies of fluvial landforms and long-term (Quaternary) landscape development in remote mountain landscapes routinely use satellite-derived DEM data sets. The SRTM and ASTER DEMs are the most commonly utilised because of their longer availability, free cost, and ease of access. However, rapid technological developments mean that newer and higher resolution DEM data sets such as ALOS World 3D (AW3D) and TanDEM-X are being released to the scientific community. Geomorphologists are thus faced with an increasingly problematic challenge of selecting an appropriate DEM for their landscape analyses. Here, we test the application of four medium resolution DEM products (30 m = SRTM, ASTER, AW3D; 12 m = TanDEM-X) for qualitative and quantitative analysis of a fluvial mountain landscape using the Dades River catchment (High Atlas Mountains, Morocco). This landscape comprises significant DEM remote sensing challenges, notably a high mountain relief, steep slopes, and a deeply incised high sinuosity drainage network with narrow canyon/gorge reaches. Our goal was to see which DEM produced the most representative best fit drainage network and meaningful quantification. To achieve this, we used ArcGIS and Stream Profiler platforms to generate catchment hillshade and slope rasters and to extract drainage network, channel long profile and channel slope, and area data. TanDEM-X produces the clearest landscape representation but with channel routing errors in localised high relief areas. Thirty-metre DEMs are smoother and less detailed, but the AW3D shows the closest fit to the real drainage network configuration. The TanDEM-X elevation values are the closest to field-derived GPS measurements. Long profiles exhibit similar shapes but with minor differences in length, elevation, and the degree of noise/smoothing, with AW3D producing the best representation. Slope-area plots display similarly positioned slope-break knickpoints with modest differences in steepness and concavity

  7. Plea for the peaceful use of nuclear power. From the plenary lecture of the Federal Minister for the Environment, Nature Protection and Reactor Safety, Dr. Angela Merkel, May 21, 1996, Mannheim; Plaedoyer fuer die friedliche Nutzung der Kernenergie. Aus dem Plenarvortrag der Bundesministerin fuer Umwelt, Naturschutz und Reaktorsicherheit, Dr. Angela Merkel, am 21.5.96 in Mannheim

    Energy Technology Data Exchange (ETDEWEB)

    Merkel, A. [Bundesministerium fuer Umwelt, Naturschutz und Reaktorsicherheit, Bonn (Germany)

    1996-06-01

    The German Federal Ministry for the Environment, founded after the 1986 Chernobyl accident, has channeled the debate about the causes and the impact of that event. German power utilities, associations, and industries have tried to mitigate the consequences to the persons affected by organizing relief campaigns. Support granted by individual states and by the EU, but also private assistance schemes, are helping the operators of nuclear power plants in the young democracies to develop ways and means of helping themselves. Western know-how is adapted to the conditions prevailing in those countries. Eastern expertise should increasingly be used in the development of new reactor lines in the West. Technology can be transferred abroad only if it finds support and acceptance in its countries of origin. The terrorist actions accompanying the shipment of radioactive waste from La Hague to Gorleben in April 1996 have shown the decisive dependence on the preservation of public law and order of the peaceful uses of nuclear power. A s a consequence, the problems of spent fuel and waste management must be separated from further acceptance issues and solved as a matter of priority. Also with respect to the back end of the fuel cycle the polluter pays principle must be applied, according to which radioactive waste arising in German nuclear power plants must be stored in interim stores and repositories in the country, irrespective of any future internationalization of the back end of the nuclear fuel cycle. (orig.) [Deutsch] Das BMU, das nach dem Unfall in Tschernobyl 1986 eingerichtet wurde, hat die Diskussion um Ursachen und Folgen eines Ereignisses gepraegt. Deutsche EVU, Verbaende und Industrieunternehmen haben versucht, die Folgen fuer die Betroffenen durch Hilfsaktionen zu mildern; Unterstuetzungen durch Einzelstaaten und EU, aber auch private Patenschaften, begleiten die Kernkraftwerksbetreiber in den jungen Demokratien mit Hilfe zur Selbsthilfe. Westliches Know-how wird in

  8. Carry-over of plant protection agents through wet deposition on the Kleine Feldberg/Taunus; Eintrag von Pflanzenschutzmitteln durch nasse Deposition auf dem Kleinen Feldberg/Taunus

    Energy Technology Data Exchange (ETDEWEB)

    Gath, B. [Zentrum fuer Umweltforschung der Johann Wolfgang Goethe-Universitaet, Frankfurt am Main (Germany); Jaeschke, W. [Zentrum fuer Umweltforschung der Johann Wolfgang Goethe-Universitaet, Frankfurt am Main (Germany); Kubiak, R. [Landes-Lehr- und Forschungsanstalt fuer Landwirtschaft, Weinbau und Gartenbau, Neustadt an der Weinstrasse (Germany); Ricker, I. [Battelle Europe Battelle-Institut e.V., Frankfurt am Main (Germany); Schmider, F. [BASF AG, Landwirtschaftliche Versuchsstation, Limburgerhof (Germany); Zietz, E. [Battelle Europe Battelle-Institut e.V., Frankfurt am Main (Germany)

    1993-11-01

    On the Feldberg and at two more sites precipitation samples were taken and analysed for selected pesticides (Lindan, Isoproturon, Triadimenol, Pirimicarb, Parathion-ethyl and atrazine). Bulk samplers (acc. to Daemmgen) were used in 14-day intervals. At two stations wet-only samplers were used in addition to the bulk samplers. Parathion-ethyl, Pirimicarb and Triadimenol were only found in single cases only. Distinct annual curves could be established for atrazin and isoproturon, they are shown in desposition charts. Only Lindan was detectable all year round. Concentrations were between 3 and 300 ng l{sup {minus}1}. Annual curves show good correlation with application periods of the individual substances. In general the annual mean value of the concentrations are below 50 ng l{sup {minus}1}. The share of dry deposition depends on substance and weather and account roughly for 10-20% of total deposition. (orig./EW) [Deutsch] Auf dem Feldberg sowie an zwei weiteren Messstandorten wurden parallel Niederschlagsproben genommen und auf ausgewaehlte Pestizide (Lindan, Isoproturon, Triadimenol, Pirimicarb, Parathion-ethyl und Atrazin) untersucht. Die Probenahme erfolgte in bulk-Sammlern nach Daemmgen in 14-Tage Intervallen. An zwei Stationen wurden parallel zu den bulk-Sammlern auch wet-only Sammler betrieben. Parathion-ethyl, Pirimicarb und Triadimenol konnten nur vereinzelt nachgewiesen werden. Von Atrazin und Isoproturon wurden ausgepraegte Jahresgaenge ermittelt und in Depositionsgraphiken dargestellt. Lediglich Lindan war nahezu das ganze Jahr ueber nachweisbar. Die gemessenen Konzentrationen lagen zwischen 3 und 300 ng 1{sup -1}. Die dargestellten Jahresgaenge korrelieren gut mit den jeweiligen Anwendungszeitraeumen der einzelnen Substanzen. Insgesamt liegen die gemessenen Konzentrationen im Jahresmittel unter 50 ngl{sup -1}. Der Beitrag der trockenen Deposition ist substanz- und wetterabhaengig und macht etwa 10-20% der Gesamtdeposition aus. (orig.)

  9. Legal boundary conditions for direct marketing of 'green current' according to EEG 2012; Rechtliche Rahmenbedingungen fuer die Direktvermarktung von ''Gruenstrom'' nach dem EEG 2012

    Energy Technology Data Exchange (ETDEWEB)

    Breuer, Daniel [Landgericht Koeln (Germany); Osborne Clarke, Koeln (Germany). Bereich Energierecht

    2012-07-01

    The new direct marketing regime of the EEG 2012 provides incentives for operators of renewables-based systems to leave the fixed reimbursement scheme and integrate their systems in the markets, especially in the context of marketing of regulating power. However, it remains to be seen if this will reduce the cost of regulating energy supply, or at least keep it at the current level. In any case, plant operators should be careful in choosing their direct marketers and other partners and consultants. Simultaneous supply of regulating power is attractive especially for controllable and in some cases also for fluctuating renewable energy sources. This does comply with the priority principle and also with the prohibition of double marketing as is clearly stated in SEction 8 No. 3a.

  10. Air pollution abatement after the nuclear phase-out. 50 ideas for a new world. rev. and enl. new ed. 2012; Klimaschutz nach dem Atomausstieg. 50 Ideen fuer eine neue Welt

    Energy Technology Data Exchange (ETDEWEB)

    Ekardt, Felix

    2012-07-01

    The author of the book under consideration reports on how the energy policy turnaround and climate change could succeed politically and economically, as well as on how we personally outwit the overwhelming force of habit, convenience, consumer race and emotional limitations on the here and now.

  11. What comes after the petroleum? The AlkaPolP process as a fundament for a lignocellulose based biorefinery; Was kommt nach dem Erdoel? Der AlkaPoIP-Prozess als Basis fuer eine lignocellulosebasierte Bioraffinerie

    Energy Technology Data Exchange (ETDEWEB)

    Engel, Norman; Hundt, Martin; Schnitzlein, Klaus [Brandenburgische Technische Universitaet Cottbus (Germany). Lehrstuhl Chemische Reaktionstechnik; Schnitzlein, Michael G. [MCI Management Center Innsbruck (Austria)

    2013-04-15

    In times of climate change, scarcity of fossil fuels and a rapidly growing world population, the chemical industry faces great challenges in the 21st century. The raw material base of the organic chemical production in Germany consists of nearly 87 % of fossil resources and only 13 % from renewable resources. An expansion of the material use of starchy and sugary agricultural crops such as corn can not be sustainable due to the competition with food production. With the use of lignocelluloses-containing biomass, the main components cellulose, hemicellulose and lignin being indigestible for human beings, the 'tank- or-plate' conflict can be avoided.

  12. Atomic energy law after the opt-out. Alive and fascinating. Report about the 14{sup th} German atomic energy law symposium 2012; Atomrecht nach dem Ausstieg. Lebendig und spannend. Tagungsbericht 14. Deutsches Atomrechtssymposium 2012

    Energy Technology Data Exchange (ETDEWEB)

    Leidinger, Tobias [Gleiss Lutz Rechtsanwaelte, Duesseldorf (Germany)

    2013-01-15

    Atomic energy law remains a living, fascinating subject matter. Nearly 200 participants were convinced of this impression at the 14{sup th} German Atomic Energy Law Symposium held in Berlin on November 19-20, 2012. Under the scientific chairmanship of Professor Dr. Martin Burgi, Ludwig Maximilian University of Munich, the German Federal Ministry for the Environment, Nature Conservation and Nuclear Safety (BMU), after an interruption of 5 years, again organized a scientific conference about practice-related topics of atomic energy and radiation protection law. Atomic energy law once again proved to be a reference area for sophisticated issues of constitutional law and administrative law above and beyond its technical confines. The agenda of the 14{sup th} German Atomic Energy Law Symposium featured a broad spectrum of topics ranging from backfitting of nuclear power plants to European atomic energy and radiation protection law, to challenges facing national legal systems in the execution of atomic energy law, to legal issues connected with decommissioning and waste management, and on to the topical subject of finding a repository site. The 14{sup th} German Atomic Energy Law Symposium, on the whole, again demonstrated that an open discourse between science and practice is able to furnish important contributions to the implementation of laws in a balanced way rooted in practice. Especially the contributions dealing with the independence of public authorities and their organization, the doctrine of the reservation of functions of the executive branch, and planning by laws contain additional provisions able to influence the continued development of administrative law also above and beyond atomic energy law. The BMU also referred to a decision just heard from Brussels to the effect that a new European Safety Directive would be published as early as in 2013. As a consequence of the nuclear stress tests conducted EU-wide, the Directive is to lay down provisions about transparency, material safety standards, and the separation of regulatory and supervisory authorities. In this way, the Commission opens up a broad field of topics which will ensure, also beyond the 14{sup th} German Atomic Energy Law Symposium, that atomic energy law will remain a living, fascinating subject matter. (orig.)

  13. Management of surface water bodies according to the new German Federal Water Act. Management objectives, minimum water-bearing, transmissibility and hydropower utilization; Die Bewirtschaftung der oberirdischen Gewaesser nach dem neuen Wasserrecht. Bewirtschaftungsziele, Mindestwasserfuehrung, Durchgaengigkeit, Wasserkraftnutzung

    Energy Technology Data Exchange (ETDEWEB)

    Kibele, Karlheinz

    2010-07-01

    The new German Federal Water Act came into effect on March 1, 2010. Since the federalism reform in the year 2006, the German Federation has got the opportunity to issue nationwide ordinances for overall water rights. Now, the Federation made use of this opportunity. However, on closer inspection the federal law turns out to be incomplete. The federal states are requested to complete the water rights so that they are ready to be enforced. In this contribution, several scopes will be exemplified. (orig.)

  14. Process for the fabrication of heat-insulating, especially ceramic solidified fiber bodies and their use. Verfahren zur Herstellung waermeisolierender, insbesondere keramischer, verfestigter Faserkoerper, nach dem Verfahren hergestellte Faserkoerper und deren Verwendung

    Energy Technology Data Exchange (ETDEWEB)

    Eschner, A.; Stein, H.

    1980-12-18

    According to the invention ceramic fibers (e.g. silicate) in the form of mats e.g. are soaked in an aqueous solution of aluminium phosphate. After that, the material is dried, tempered above 400/sup 0/C and heated to 800-1400/sup 0/C. This material can be used as heat insulating material for pipes, furnaces or wear lining for liquid metals.

  15. Use of residual fuels and biowaste of low calorific value for syngas production by the Noell conversion process; Der Einsatz niederkaloriger Energietraeger aus Reststoffen und Bioabfaellen zur Synthesegaserzeugung nach dem Noell-Konversionsverfahren

    Energy Technology Data Exchange (ETDEWEB)

    Schingnitz, M.; Goehler, P. [Noell-KRC Energie- und Umwelttechnik GmbH, Freiberg (Germany)

    1996-12-31

    By gasification with oxygen, municipal waste can be converted into a pure, burnable gas. The gas can be used like natural gas, e.g. in boilers and industrial furnaces, gas engines and gas turbines for heat and electric power generation, but also in chemical synthesis processes, e.g. methanol synthesis. If the right gasification technology is selected, the mineral constitutents of the waste materials can be melted down at the same time, e.g. into a granulate with a glass-like structure that can be used as constructional material. (orig) [Deutsch] Durch Vergasung mit Sauerstoff lassen sich kommunale Abfaelle in ein brennbares Gas umwandeln. Dieses Gas kann mit einfachen und bewaehrten verfahren von Schadstoffen wie Schwefelverbindungen befreit werden. Es laesst sich wie sauberes Erdgas umweltfreundlich in Kesseln und Industrieoefen einsetzen, in Gasmotoren oder Gasturbinen zur Erzeugung von Elektroenergie und Heizwaerme nutzen, aber auch zu chemischen Synthesen, beispielsweise von Methanol, verwenden. Bei geeigneter Wahl der Vergasungstechnologie gelingt es ausserdem, die mineralischen Bestandteile der Abfallstoffe prozessintern aufzuschmelzen und in ein beispielsweise als Baustoff verwertbares Schmelzgranulat mit glasartiger Struktur zu ueberfuehren. (orig)

  16. Search for solar axions with the X-ray telescope of the CAST experiment (phase II); Suche nach solaren Axionen mit dem Roentgenteleskop des CAST-Experiments (Phase II)

    Energy Technology Data Exchange (ETDEWEB)

    Nordt, Annika

    2009-10-14

    The CAST (CERN Solar Axion Telescope) experiment is searching for solar axions by their conversion into photons inside a transverse magnetic field. So far, no solar axionsignal has been detected, but a new upper limit could be given (CAST Phase I). Since 2005, CAST entered in its second phase where it operates with a buffer gas ({sup 4}He) in the conversion region to extend the sensitivity of the experiment to higher axionmasses. For the first time it is possible to enter the theoretically favored axion massrange and to give an upper limit for this solar axion mass-range (>0.02 eV). This thesis is about the analysis of the X-ray telescope data Phase II with {sup 4}He inside the magnet. The result for the coupling constant of axions to photons is: g{sub {alpha}}{sub {gamma}}{sub {gamma}}<1.6-6.0 x 10{sup -10} GeV{sup -1} (95%C.L.) for m{sub a}=0.02-0.4 eV. (2) This result is better than any result that has been given before in this mass range for solar axions. (orig.)

  17. Use of residual fuels and biowaste of low calorific value for syngas production by the Noell conversion process; Der Einsatz niederkaloriger Energietraeger aus Reststoffen und Bioabfaellen zur Synthesegaserzeugung nach dem Noell-Konversionsverfahren

    Energy Technology Data Exchange (ETDEWEB)

    Schingnitz, M; Goehler, P [Noell-KRC Energie- und Umwelttechnik GmbH, Freiberg (Germany)

    1997-12-31

    By gasification with oxygen, municipal waste can be converted into a pure, burnable gas. The gas can be used like natural gas, e.g. in boilers and industrial furnaces, gas engines and gas turbines for heat and electric power generation, but also in chemical synthesis processes, e.g. methanol synthesis. If the right gasification technology is selected, the mineral constitutents of the waste materials can be melted down at the same time, e.g. into a granulate with a glass-like structure that can be used as constructional material. (orig) [Deutsch] Durch Vergasung mit Sauerstoff lassen sich kommunale Abfaelle in ein brennbares Gas umwandeln. Dieses Gas kann mit einfachen und bewaehrten verfahren von Schadstoffen wie Schwefelverbindungen befreit werden. Es laesst sich wie sauberes Erdgas umweltfreundlich in Kesseln und Industrieoefen einsetzen, in Gasmotoren oder Gasturbinen zur Erzeugung von Elektroenergie und Heizwaerme nutzen, aber auch zu chemischen Synthesen, beispielsweise von Methanol, verwenden. Bei geeigneter Wahl der Vergasungstechnologie gelingt es ausserdem, die mineralischen Bestandteile der Abfallstoffe prozessintern aufzuschmelzen und in ein beispielsweise als Baustoff verwertbares Schmelzgranulat mit glasartiger Struktur zu ueberfuehren. (orig)

  18. After swimming one goes on the ice. Multifunctional complex of sports and leisure uses energetic synergies; Nach dem Schwimmen geht's aufs Eis. Multifunktionaler Sport- und Freizeitkomplex nutzt energetische Synergien

    Energy Technology Data Exchange (ETDEWEB)

    Jaeger, Frank Peter [Redaktionbuero Archikontext, Berlin (Germany); Vonseelen, Tanja

    2012-11-01

    In Lentpark (Cologne, Federal Republic of Germany) skating and swimming are combined in one building - an unusual combination of use with tradition in Cologne. Recently the bureau Schulitz Architecture + Technology (Braunschweig, Federal Republic of Germany) designed the completed new building of the ice ring and swimming hall. The new building develops the energetic synergies of the coexistence of ice preparation and water heating. The new building was commissioned by KoelnBaeder GmbH (Cologne, Federal Republic of Germany) and is a unique of modern skating arena with spectacular ice overhead way, swimming pool and sauna in Europe.

  19. Exemption procedure for large-scale site rehabilitation projects as laid down in the administrative agreement on the financing of site rehabilitation in the New Laender; Altlastengrossprojekte im Freistellungsverfahren nach dem Verwaltungsabkommen zur Finanzierung der Altlastensanierung in den neuen Bundeslaendern

    Energy Technology Data Exchange (ETDEWEB)

    Hohenlohe, A zu; Kosinowski, M; Radtke, H

    1994-12-31

    The present article describes the legal groundwork of the Administrative Agreement on the Financing of Site Rehabilitation in the new Laender. It then lists 19 large-scale projects and depicts the organisational structure adopted for their implementation. Finally it presents various site rehabilitation concepts and financial schemes. (SR) [Deutsch] Der Artikel beschreibt die gesetzlichen Grundlagen des Verwaltungsabkommens zur Finanzierung der Altlastensanierung in den neuen Bundeslaendern. Anschliessend werden 19 Grossprojekte aufgelistet und die Organisationsstruktur zur Umsetzung der Sanierungsarbeiten dargestellt. Abschliessend werden Altlatensanierungskonzepte und Finanzrahmen dargestellt. (SR)

  20. Textkritische Edition der Übersetzung des Psalters in die Litauische Sprache von Johannes Bretke, Pastor zu Labiau und Königsberg i. Pr., nach der Handschrift aus dem Jahre 1580 [...

    OpenAIRE

    Gelumbeckaitė, Jolanta

    2003-01-01

    The review discusses the historical critical edition of the Psalm Book translated into Lithuanian by Jonas Bretkūnas in 1580 prepared by Friedrich Scholz, Professor Emeritus at Münster University. This is the first textologically diplomatically in corpore published volume of the Bible manuscript by Bretkūnas (1579–1590) and the first critical edition of the 16th c. Lithuanian manuscript text. The critical edition of the Psalm Book is part of a large Bretkūnas’ Bible publishing project, consis...

  1. Cuts in energy and operating cost with the Swiss system 'Energie in ARA' - practical experience in Germany; Energie- und Betriebskosteneinsparungen nach dem schweizerischen System ''Energie in ARA'' - Praxiserfahrungen in Deutschland

    Energy Technology Data Exchange (ETDEWEB)

    Christmann, B. [UmBAUwelt Partnerschaft Architekten und Ingenieure, Riedstadt (Germany)

    1999-07-01

    German sewage treatment plants, too, have potential for saving energy cost and cutting down on their operating expenditure. Following the systematy developed by the 'Energie in ARA' concept, this potential can be harnessed. (orig.) [German] Potential fuer Energiekosteneinsparungen und dadurch initiierte Betriebskosteneinsparungen ist auch bei deutschen Klaeranlagen vorhanden. Die Systematik 'Energie in ARA' kann fuer die Erschliessung der Einsparpotentiale verwendet werden. (orig.)

  2. Analysis the Accuracy of Digital Elevation Model (DEM) for Flood Modelling on Lowland Area

    Science.gov (United States)

    Zainol Abidin, Ku Hasna Zainurin Ku; Razi, Mohd Adib Mohammad; Bukari, Saifullizan Mohd

    2018-04-01

    Flood is one type of natural disaster that occurs almost every year in Malaysia. Commonly the lowland areas are the worst affected areas. This kind of disaster is controllable by using an accurate data for proposing any kinds of solutions. Elevation data is one of the data used to produce solutions for flooding. Currently, the research about the application of Digital Elevation Model (DEM) in hydrology was increased where this kind of model will identify the elevation for required areas. University of Tun Hussein Onn Malaysia is one of the lowland areas which facing flood problems on 2006. Therefore, this area was chosen in order to produce DEM which focussed on University Health Centre (PKU) and drainage area around Civil and Environment Faculty (FKAAS). Unmanned Aerial Vehicle used to collect aerial photos data then undergoes a process of generating DEM according to three types of accuracy and quality from Agisoft PhotoScan software. The higher the level of accuracy and quality of DEM produced, the longer time taken to generate a DEM. The reading of the errors created while producing the DEM shows almost 0.01 different. Therefore, it has been identified there are some important parameters which influenced the accuracy of DEM.

  3. Generation and performance assessment of the global TanDEM-X digital elevation model

    Science.gov (United States)

    Rizzoli, Paola; Martone, Michele; Gonzalez, Carolina; Wecklich, Christopher; Borla Tridon, Daniela; Bräutigam, Benjamin; Bachmann, Markus; Schulze, Daniel; Fritz, Thomas; Huber, Martin; Wessel, Birgit; Krieger, Gerhard; Zink, Manfred; Moreira, Alberto

    2017-10-01

    The primary objective of the TanDEM-X mission is the generation of a global, consistent, and high-resolution digital elevation model (DEM) with unprecedented global accuracy. The goal is achieved by exploiting the interferometric capabilities of the two twin SAR satellites TerraSAR-X and TanDEM-X, which fly in a close orbit formation, acting as an X-band single-pass interferometer. Between December 2010 and early 2015 all land surfaces have been acquired at least twice, difficult terrain up to seven or eight times. The acquisition strategy, data processing, and DEM calibration and mosaicking have been systematically monitored and optimized throughout the entire mission duration, in order to fulfill the specification. The processing of all data has finally been completed in September 2016 and this paper reports on the final performance of the TanDEM-X global DEM and presents the acquisition and processing strategy which allowed to obtain the final DEM quality. The results confirm the outstanding global accuracy of the delivered product, which can be now utilized for both scientific and commercial applications.

  4. Eröffnung des „Hauses der Astronomie“ auf dem Königsstuhl

    OpenAIRE

    Pössel, Markus; Tschira, Klaus

    2012-01-01

    Mit dem „Haus der Astronomie“ (HdA) auf dem Königsstuhl ist ein neues Zentrum für astronomische Bildungs- und Öffentlichkeitsarbeit in Heidelberg eröffnet. Das Haus der Astronomie ist eine gemeinsame Einrichtung der Max-Planck-Gesellschaft (MPG) und der Klaus Tschira Stiftung unter Beteiligung der Stadt Heidelberg und der Ruperto Carola, deren Zentrum für Astronomie eng mit dem HdA zusammenarbeitet. Ziel des HdA ist es, astronomische Forschung einer breiten Öffentlichkeit in verständlicher Fo...

  5. DEM Simulation of Particle Stratification and Segregation in Stockpile Formation

    Directory of Open Access Journals (Sweden)

    Zhang Dizhe

    2017-01-01

    Full Text Available Granular stockpiles are commonly observed in nature and industry, and their formation has been extensively investigated experimentally and mathematically in the literature. One of the striking features affecting properties of stockpiles are the internal patterns formed by the stratification and segregation processes. In this work, we conduct a numerical study based on DEM (discrete element method model to study the influencing factors and triggering mechanisms of these two phenomena. With the use of a previously developed mixing index, the effects of parameters including size ratio, injection height and mass ratio are investigated. We found that it is a void-filling mechanism that differentiates the motions of particles with different sizes. This mechanism drives the large particles to flow over the pile surface and segregate at the pile bottom, while it also pushes small particles to fill the voids between large particles, giving rise to separate layers. Consequently, this difference in motion will result in the observed stratification and segregation phenomena.

  6. Die Rolle von Charaktereigenschaften, Umwelt und dem Genpolymorphismus des Serotonintransporters bei der Entstehung on Major Depression

    OpenAIRE

    Schmid, Bianca

    2011-01-01

    1.1 Hintergrund und Ziele Weltweit sind derzeit 121 Millionen Menschen von Depressionen betroffen. Unter diesem Krankheitsbild versteht man einen Verlust von Interesse oder Freude, depressive Verstimmung, Müdigkeit und Energieverlust, verminderte Denk- und Entscheidungsfähigkeit, Unruhe oder Verlangsamung, aber auch körperliche Symptome wie Schlafstörungen oder Appetitverlust gehören dazu. Je nach Schwere und Ausprägungsgrad der Erkrankung sind die Betroffenen in ihrem Lebensalltag enorm beei...

  7. A photogrammetric DEM of Greenland based on 1978-1987 aerial photos: validation and integration with laser altimetry and satellite-derived DEMs

    DEFF Research Database (Denmark)

    Korsgaard, Niels Jákup; Kjær, Kurt H.; Nuth, Christopher

    Here we present a DEM of Greenland covering all ice-free terrain and the margins of the GrIS and local glaciers and ice caps. The DEM is based on the 3534 photos used in the aero-triangulation which were recorded by the Danish Geodata Agency (then the Geodetic Institute) in survey campaigns...... spanning the period 1978-1987. The GrIS is covered tens of kilometers into the interior due to the large footprints of the photos (30 x 30 km) and control provided by the aero-triangulation. Thus, the data are ideal for providing information for analysis of ice marginal elevation change and also control...

  8. Aktuelle Technik der Bruststraffung beim Mann nach Gewichtsverlust [Modern technique in male breast contouring after weight loss

    Directory of Open Access Journals (Sweden)

    Stoff, Alexander

    2013-08-01

    Full Text Available [english] The morbid adiposity and its medical consequences demonstrates a growing problem of our current prosperous society. Due to a significant improvement of bariatric techniques and a reduplication of adipose patients during the 20 century, the number of patients, who present to plastic surgeons with a new degree of suffering, has been growing steadily. Initially, the female patients were in the majority, which has been more balanced nowadays.The male breast is a body region that primarily symbolizes masculinity and strenght. In male patients after massive weight loss, this body region remains as an extremly deflated breast envelope without any sign of possible retraction. The plastic surgeon may choose from different single or combinated ltechniques, which are indicated depending on the local and adjacent tissue characteristics.We are presenting our modified technique of male breast reshaping, referring to the technique of Aly, except for a NAC transposition on a central pedicle. The central pedicle is hereby preserved from resection after tremendous liposuction. This central pedicle technique allows a safe and uncomplicated NAC transposition with significant advantages compared to free NAC-Transposition techniques in terms of aesthetical and functional outcome. [german] Die morbide Adipositas mit ihren Langzeitfolgen ist ein zunehmendes Problem unserer heutigen Wohlstandsgesellschaft. Mit einer Verdoppelung der betroffenen Patienten im Laufe des 20. Jahrhunderts ist gleichzeitig durch rasante Verbesserung der bariatrischen Eingriffe auch die Zahl der Patienten signifikant und stetig gestiegen, die sich nach massiver Gewichtsreduktion nun mit neuem Leidensdruck beim Plastischen Chirurgen vorstellen. Hierbei ist die anfängliche Überzahl der weiblichen Patienten in ein ausgewogenes Verhältnis der betroffenen Geschlechter übergegangen. Die männliche Brust, eine Körperregion, die in erster Linie Männlichkeit und Stärke symbolisiert und

  9. Influence of combustion air guidance on solid matter burnout and on pollutant emissions in grid incinerators; Einfluss der Verbrennungsluftfuehrung auf den Feststoffabbrand und auf das Schadstoffverhalten bei der Hausmuellverbrennung auf dem Rost

    Energy Technology Data Exchange (ETDEWEB)

    Hunsinger, H.; Seifert, H. [Forschungszentrum Karlsruhe GmbH Technik und Umwelt (Germany). Inst. fuer Technische Chemie

    2003-07-01

    The contribution investigates the influence of combustion air guidance strategies on process optimisation. In particular, it is investigated if efficient burnout correlates with low pollutant emissions and if the effects are similar or contrary for the different process goals. (orig.) [German] Der Einfluss von Brennstoffqualitaeten, der Ofengeometrie sowie von Feuerungsbetriebsparametern auf die Bildungsraten von Schadstoffen wie PCDD/F und NO{sub x} und auf die Transferraten von Schwermetallen, Chlor- und Schwefelverbindungen aus dem Brennstoffbett ins Rauchgas ist zur Zeit nur ungenuegend bekannt. Besonders die Frage, wie die primaere Forderung nach moeglichst vollstaendigem Ausbrand von Rauchgas und Rostasche mit weiteren Zielen wie niedrige Bildungsraten von Schadstoffen und Inertisierung der Rostasche korreliert, zeigt den Bedarf umfassender systematischer Untersuchungen auf. Im Rahmen dieses Beitrags soll als Beispiel fuer Modifikationen des Verbrennungsprozesses der Einfluss unterschiedlicher Verbrennungsluftfuehrungen auf die aufgefuehrten Optimierungsziele vorgestellt werden. Insbesondere soll der Frage nachgegangen werden, ob ein effizienter Ausbrand mit niedrigen Schadstoffbildungsraten korreliert und ob zwischen den Zielgroessen gleiche oder kontraere Wirkungen auftreten. (orig.)

  10. 2012 Oregon Department of Geology and Mineral Industries (DOGAMI) Lidar DEM: Rogue River Oregon

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The dataset encompasses portions of Coos, Curry, Douglas, Jackson, and Josephine Counties.The bare earth digital elevation model (DEM) represents the earth's surface...

  11. Relative Error Evaluation to Typical Open Global dem Datasets in Shanxi Plateau of China

    Science.gov (United States)

    Zhao, S.; Zhang, S.; Cheng, W.

    2018-04-01

    Produced by radar data or stereo remote sensing image pairs, global DEM datasets are one of the most important types for DEM data. Relative error relates to surface quality created by DEM data, so it relates to geomorphology and hydrologic applications using DEM data. Taking Shanxi Plateau of China as the study area, this research evaluated the relative error to typical open global DEM datasets including Shuttle Radar Terrain Mission (SRTM) data with 1 arc second resolution (SRTM1), SRTM data with 3 arc second resolution (SRTM3), ASTER global DEM data in the second version (GDEM-v2) and ALOS world 3D-30m (AW3D) data. Through process and selection, more than 300,000 ICESat/GLA14 points were used as the GCP data, and the vertical error was computed and compared among four typical global DEM datasets. Then, more than 2,600,000 ICESat/GLA14 point pairs were acquired using the distance threshold between 100 m and 500 m. Meanwhile, the horizontal distance between every point pair was computed, so the relative error was achieved using slope values based on vertical error difference and the horizontal distance of the point pairs. Finally, false slope ratio (FSR) index was computed through analyzing the difference between DEM and ICESat/GLA14 values for every point pair. Both relative error and FSR index were categorically compared for the four DEM datasets under different slope classes. Research results show: Overall, AW3D has the lowest relative error values in mean error, mean absolute error, root mean square error and standard deviation error; then the SRTM1 data, its values are a little higher than AW3D data; the SRTM3 and GDEM-v2 data have the highest relative error values, and the values for the two datasets are similar. Considering different slope conditions, all the four DEM data have better performance in flat areas but worse performance in sloping regions; AW3D has the best performance in all the slope classes, a litter better than SRTM1; with slope increasing

  12. VT Lidar Hydro-flattened DEM (0.7 meter) - 2014 - Chittenden, Lamoille, Orleans, & Washington Counties

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) This metadata applies to the following collection area(s): Eastern VT 2014 0.7m and Digital Elevation Model (DEM) dataset of the following...

  13. Evaluation of TanDEMx and SRTM DEM on watershed simulated ...

    Indian Academy of Sciences (India)

    57

    **Department of Environmental and Water Resource Engineering. School of Civil .... Few studies have investigated the impact of DEM on watershed delineation like ..... on Integrating GIS and Environmental Modelling, Santa Fe, New. Mexico.

  14. VT Lidar Hydro-flattened DEM (0.7 meter) - 2015 - Windham County

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) This metadata applies to the following collection area(s): Windham County 2015 0.7m and Digital Elevation Model (DEM) dataset of the following...

  15. 5 Meter Alaska Digital Elevation Models (DEMs) - USGS National Map 3DEP Downloadable Data Collection

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This dataset is comprised of 5-meter ifsar-derived Digital Elevation Models (DEMs) over Alaska only. It is distributed as one-degree blocks with overedge. Horizontal...

  16. A Novel Large-scale Mentoring Program for Medical Students based on a Quantitative and Qualitative Needs Analysis [Aufbau eines innovativen Mentorenprogramms für eine große Zahl Medizinstudierender nach quantitativer und qualitativer Bedarfsanalyse

    Directory of Open Access Journals (Sweden)

    von der Borch, Philip

    2011-05-01

    Ludwig-Maximilians-Universität München (LMU und beschreiben die Einführung eines innovativen, umfassenden Mentorenprogramms.Methoden: Die Bedarfsanalyse wurde durch eine an alle Medizinstudierenden der Medizinischen Fakultät gerichtete Online-Umfrage durchgeführt (n=578 von 4.109 Studenten, Rücklauf 14,1%. Außerdem führten wir Fokusgruppen mit Medizinstudenten (n=24 und ärztlichem Personal (n=22 durch. Schließlich wurden alle Studierenden, die sich für das individuelle Mentorenprogramm interessierten, zu ihren Erwartungen befragt (n=534.Ergebnisse: 83% der Medizinstudierenden äußerten Zufriedenheit mit dem aktuellen Münchener Curriculum. Im Gegensatz dazu fühlten sich nur 36.5% der Studierenden unserer großen Fakultät ausreichend im Studium betreut, und 86% der Studierenden äußerten den Wunsch nach mehr Betreuung. Die Rolle ihres Mentors wünschten sich 55.6% "sehr" als Berater, Kontaktvermittler (36.4% und Ideenlieferant (28.1%. Die Themen, die angehende Mentees im Vorfeld "sehr" mit ihren Mentoren besprechen wollten, waren die Doktorarbeit (56.6%, das Praktische Jahr (55.8% und Auslandsaufenthalte (45.5%.Schlussfolgerungen: Wir haben anhand der Erkenntnisse unserer Bedarfsanalyse ein innovatives, zweigleisiges Konzept entworfen, das aus einem beliebig skalierbaren individuellen Mentorenprogramm für Studierende in klinischen Semestern und einem Peer Mentoring-Programm für sämtliche Medizinstudierende unserer Fakultät besteht. Ein Jahr nach der Initiierung des Programms haben über 300 Studierende im klinischen Studienabschnitt einen individuellen Mentor aus der Fakultät ausgewählt und 1.503 Studierende und Ärzte nahmen am Peer Mentoring teil.

  17. Glacier Volume Change Estimation Using Time Series of Improved Aster Dems

    Science.gov (United States)

    Girod, Luc; Nuth, Christopher; Kääb, Andreas

    2016-06-01

    Volume change data is critical to the understanding of glacier response to climate change. The Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) system embarked on the Terra (EOS AM-1) satellite has been a unique source of systematic stereoscopic images covering the whole globe at 15m resolution and at a consistent quality for over 15 years. While satellite stereo sensors with significantly improved radiometric and spatial resolution are available to date, the potential of ASTER data lies in its long consistent time series that is unrivaled, though not fully exploited for change analysis due to lack of data accuracy and precision. Here, we developed an improved method for ASTER DEM generation and implemented it in the open source photogrammetric library and software suite MicMac. The method relies on the computation of a rational polynomial coefficients (RPC) model and the detection and correction of cross-track sensor jitter in order to compute DEMs. ASTER data are strongly affected by attitude jitter, mainly of approximately 4 km and 30 km wavelength, and improving the generation of ASTER DEMs requires removal of this effect. Our sensor modeling does not require ground control points and allows thus potentially for the automatic processing of large data volumes. As a proof of concept, we chose a set of glaciers with reference DEMs available to assess the quality of our measurements. We use time series of ASTER scenes from which we extracted DEMs with a ground sampling distance of 15m. Our method directly measures and accounts for the cross-track component of jitter so that the resulting DEMs are not contaminated by this process. Since the along-track component of jitter has the same direction as the stereo parallaxes, the two cannot be separated and the elevations extracted are thus contaminated by along-track jitter. Initial tests reveal no clear relation between the cross-track and along-track components so that the latter seems not to be

  18. GLACIER VOLUME CHANGE ESTIMATION USING TIME SERIES OF IMPROVED ASTER DEMS

    Directory of Open Access Journals (Sweden)

    L. Girod

    2016-06-01

    Full Text Available Volume change data is critical to the understanding of glacier response to climate change. The Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER system embarked on the Terra (EOS AM-1 satellite has been a unique source of systematic stereoscopic images covering the whole globe at 15m resolution and at a consistent quality for over 15 years. While satellite stereo sensors with significantly improved radiometric and spatial resolution are available to date, the potential of ASTER data lies in its long consistent time series that is unrivaled, though not fully exploited for change analysis due to lack of data accuracy and precision. Here, we developed an improved method for ASTER DEM generation and implemented it in the open source photogrammetric library and software suite MicMac. The method relies on the computation of a rational polynomial coefficients (RPC model and the detection and correction of cross-track sensor jitter in order to compute DEMs. ASTER data are strongly affected by attitude jitter, mainly of approximately 4 km and 30 km wavelength, and improving the generation of ASTER DEMs requires removal of this effect. Our sensor modeling does not require ground control points and allows thus potentially for the automatic processing of large data volumes. As a proof of concept, we chose a set of glaciers with reference DEMs available to assess the quality of our measurements. We use time series of ASTER scenes from which we extracted DEMs with a ground sampling distance of 15m. Our method directly measures and accounts for the cross-track component of jitter so that the resulting DEMs are not contaminated by this process. Since the along-track component of jitter has the same direction as the stereo parallaxes, the two cannot be separated and the elevations extracted are thus contaminated by along-track jitter. Initial tests reveal no clear relation between the cross-track and along-track components so that the latter

  19. Uncertainty of SWAT model at different DEM resolutions in a large mountainous watershed.

    Science.gov (United States)

    Zhang, Peipei; Liu, Ruimin; Bao, Yimeng; Wang, Jiawei; Yu, Wenwen; Shen, Zhenyao

    2014-04-15

    The objective of this study was to enhance understanding of the sensitivity of the SWAT model to the resolutions of Digital Elevation Models (DEMs) based on the analysis of multiple evaluation indicators. The Xiangxi River, a large tributary of Three Gorges Reservoir in China, was selected as the study area. A range of 17 DEM spatial resolutions, from 30 to 1000 m, was examined, and the annual and monthly model outputs based on each resolution were compared. The following results were obtained: (i) sediment yield was greatly affected by DEM resolution; (ii) the prediction of dissolved oxygen load was significantly affected by DEM resolutions coarser than 500 m; (iii) Total Nitrogen (TN) load was not greatly affected by the DEM resolution; (iv) Nitrate Nitrogen (NO₃-N) and Total Phosphorus (TP) loads were slightly affected by the DEM resolution; and (v) flow and Ammonia Nitrogen (NH₄-N) load were essentially unaffected by the DEM resolution. The flow and dissolved oxygen load decreased more significantly in the dry season than in the wet and normal seasons. Excluding flow and dissolved oxygen, the uncertainties of the other Hydrology/Non-point Source (H/NPS) pollution indicators were greater in the wet season than in the dry and normal seasons. Considering the temporal distribution uncertainties, the optimal DEM resolutions for flow was 30-200 m, for sediment and TP was 30-100 m, for dissolved oxygen and NO₃-N was 30-300 m, for NH₄-N was 30 to 70 m and for TN was 30-150 m. Copyright © 2014 Elsevier Ltd. All rights reserved.

  20. An experimentally validated DEM study of powder mixing in a paddle blade mixer

    OpenAIRE

    Pantaleev, Stefan; Yordanova, Slavina; Janda, Alvaro; Marigo, Michele; Ooi, Jin

    2017-01-01

    An investigation on the predictive capabilities of Discrete Element Method simulations of a powder mixing process in a laboratory scale paddle blade mixer is presented. The visco-elasto-plastic frictional adhesive DEM contactmodel of Thakur et al. (2014) was used to represent the cohesive behaviour of an aluminosilicate powder in which the model parameters were determined using experimental flow energy measurements from the FT4powder rheometer. DEM simulations of the mixing process using the ...

  1. An Investigation into Solution Verification for CFD-DEM

    Energy Technology Data Exchange (ETDEWEB)

    Fullmer, William D. [National Energy Technology Lab. (NETL), AECOM, Morgantown, WV (United States); Musser, Jordan [National Energy Technology Lab. (NETL), Morgantown, WV (United States)

    2017-10-01

    This report presents the study of the convergence behavior of the computational fluid dynamicsdiscrete element method (CFD-DEM) method, specifically National Energy Technology Laboratory’s (NETL) open source MFiX code (MFiX-DEM) with a diffusion based particle-tocontinuum filtering scheme. In particular, this study focused on determining if the numerical method had a solution in the high-resolution limit where the grid size is smaller than the particle size. To address this uncertainty, fixed particle beds of two primary configurations were studied: i) fictitious beds where the particles are seeded with a random particle generator, and ii) instantaneous snapshots from a transient simulation of an experimentally relevant problem. Both problems considered a uniform inlet boundary and a pressure outflow. The CFD grid was refined from a few particle diameters down to 1/6th of a particle diameter. The pressure drop between two vertical elevations, averaged across the bed cross-section was considered as the system response quantity of interest. A least-squares regression method was used to extrapolate the grid-dependent results to an approximate “grid-free” solution in the limit of infinite resolution. The results show that the diffusion based scheme does yield a converging solution. However, the convergence is more complicated than encountered in simpler, single-phase flow problems showing strong oscillations and, at times, oscillations superimposed on top of globally non-monotonic behavior. The challenging convergence behavior highlights the importance of using at least four grid resolutions in solution verification problems so that (over-determined) regression-based extrapolation methods may be applied to approximate the grid-free solution. The grid-free solution is very important in solution verification and VVUQ exercise in general as the difference between it and the reference solution largely determines the numerical uncertainty. By testing

  2. ASTER Global DEM contribution to GEOSS demonstrates open data sharing

    Science.gov (United States)

    Sohre, T.; Duda, K. A.; Meyer, D. J.; Behnke, J.; Nasa Esdis Lp Daac

    2010-12-01

    across all the GEOSS Societal Benefit areas was shown. The release of the global tiled research-grade DEM resulted in a significant increase in demand for ASTER elevation models, and increased awareness of related products. No cost access to these data has also promoted new applications of remotely sensed data, increasing their use across the full range of the GEOSS societal benefit areas. In addition, the simplified data access and greatly expanded pool of users resulted in a number of suggestions from researchers in many disciplines for possible enhancements to future versions of the ASTER GDEM. The broad distribution of the product can be directly attributed to the adoption of fundamental GEOSS data sharing principles, which are directed toward expanded access by minimizing time delay and cost, thus facilitating data use for education, research, and a range of other applications. The ASTER GDEM demonstrated the need and user demand for an improved global DEM product as well as the added benefit of not only “full and open” distribution, but “free and open” distribution.

  3. DEM simulation of granular flows in a centrifugal acceleration field

    Science.gov (United States)

    Cabrera, Miguel Angel; Peng, Chong; Wu, Wei

    2017-04-01

    The main purpose of mass-flow experimental models is abstracting distinctive features of natural granular flows, and allow its systematic study in the laboratory. In this process, particle size, space, time, and stress scales must be considered for the proper representation of specific phenomena [5]. One of the most challenging tasks in small scale models, is matching the range of stresses and strains among the particle and fluid media observed in a field event. Centrifuge modelling offers an alternative to upscale all gravity-driven processes, and it has been recently employed in the simulation of granular flows [1, 2, 3, 6, 7]. Centrifuge scaling principles are presented in Ref. [4], collecting a wide spectrum of static and dynamic models. However, for the case of kinematic processes, the non-uniformity of the centrifugal acceleration field plays a major role (i.e., Coriolis and inertial effects). In this work, we discuss a general formulation for the centrifugal acceleration field, implemented in a discrete element model framework (DEM), and validated with centrifuge experimental results. Conventional DEM simulations relate the volumetric forces as a function of the gravitational force Gp = mpg. However, in the local coordinate system of a rotating centrifuge model, the cylindrical centrifugal acceleration field needs to be included. In this rotating system, the centrifugal acceleration of a particle depends on the rotating speed of the centrifuge, as well as the position and speed of the particle in the rotating model. Therefore, we obtain the formulation of centrifugal acceleration field by coordinate transformation. The numerical model is validated with a series of centrifuge experiments of monodispersed glass beads, flowing down an inclined plane at different acceleration levels and slope angles. Further discussion leads to the numerical parameterization necessary for simulating equivalent granular flows under an augmented acceleration field. The premise of

  4. Modelling of Singapore's topographic transformation based on DEMs

    Science.gov (United States)

    Wang, Tao; Belle, Iris; Hassler, Uta

    2015-02-01

    Singapore's topography has been heavily transformed by industrialization and urbanization processes. To investigate topographic changes and evaluate soil mass flows, historical topographic maps of 1924 and 2012 were employed, and basic topographic features were vectorized. Digital elevation models (DEMs) for the two years were reconstructed based on vector features. Corresponding slope maps, a surface difference map and a scatter plot of elevation changes were generated and used to quantify and categorize the nature of the topographic transformation. The surface difference map is aggregated into five main categories of changes: (1) areas without significant height changes, (2) lowered-down areas where hill ranges were cut down, (3) raised-up areas where valleys and swamps were filled in, (4) reclaimed areas from the sea, and (5) new water-covered areas. Considering spatial proximity and configurations of different types of changes, topographic transformation can be differentiated as either creating inland flat areas or reclaiming new land from the sea. Typical topographic changes are discussed in the context of Singapore's urbanization processes. The two slope maps and elevation histograms show that generally, the topographic surface of Singapore has become flatter and lower since 1924. More than 89% of height changes have happened within a range of 20 m and 95% have been below 40 m. Because of differences in land surveying and map drawing methods, uncertainties and inaccuracies inherent in the 1924 topographic maps are discussed in detail. In this work, a modified version of a traditional scatter plot is used to present height transformation patterns intuitively. This method of deriving categorical maps of topographical changes from a surface difference map can be used in similar studies to qualitatively interpret transformation. Slope maps and histograms were also used jointly to reveal additional patterns of topographic change.

  5. COMPARISON AND CO-REGISTRATION OF DEMS GENERATED FROM HiRISE AND CTX IMAGES

    Directory of Open Access Journals (Sweden)

    Y. Wang

    2016-06-01

    Full Text Available Images from two sensors, the High-Resolution Imaging Science Experiment (HiRISE and the Context Camera (CTX, both on-board the Mars Reconnaissance Orbiter (MRO, were used to generate high-quality DEMs (Digital Elevation Models of the Martian surface. However, there were discrepancies between the DEMs generated from the images acquired by these two sensors due to various reasons, such as variations in boresight alignment between the two sensors during the flight in the complex environment. This paper presents a systematic investigation of the discrepancies between the DEMs generated from the HiRISE and CTX images. A combined adjustment algorithm is presented for the co-registration of HiRISE and CTX DEMs. Experimental analysis was carried out using the HiRISE and CTX images collected at the Mars Rover landing site and several other typical regions. The results indicated that there were systematic offsets between the HiRISE and CTX DEMs in the longitude and latitude directions. However, the offset in the altitude was less obvious. After combined adjustment, the offsets were eliminated and the HiRISE and CTX DEMs were co-registered to each other. The presented research is of significance for the synergistic use of HiRISE and CTX images for precision Mars topographic mapping.

  6. TanDEM-X the Earth surface observation project from space level - basis and mission status

    Directory of Open Access Journals (Sweden)

    Jerzy Wiśniowski

    2015-03-01

    Full Text Available TanDEM-X is DLR (Deutsches Zentrum für Luft- und Raumfahrt the Earth surface observation project using high-resolution SAR interferometry. It opens a new era in space borne radar remote sensing. The system is based on two satellites: TerraSAR-X (TSX and TanDEM-X (TDX flying on the very close, strictly controlled orbits. This paper gives an overview of the radar technology and overview of the TanDEM-X mission concept which is based on several innovative technologies. The primary objective of the mission is to deliver a global digital elevation model (DEM with an unprecedented accuracy, which is equal to or surpass the HRTI-3 specifications (12 m posting, relative height accuracy ±2 m for slope < 20% and ±4 m for slope > 20% [8]. Beyond that, TanDEM-X provides a highly reconfigurable platform for the demonstration of new radar imaging techniques and applications.[b]Keywords[/b]: remote sensing, Bistatic SAR, digital elevation model (DEM, Helix formation, SAR interferomery, HRTI-3, synchronization

  7. Early clinical phase of patient's management after polytrauma using 1- and 4-slice helical CT; Fruehes klinisches Management nach Polytrauma mit 1- und 4-Schicht-Spiral-CT

    Energy Technology Data Exchange (ETDEWEB)

    Kloeppel, R.; Kahn, T. [Klinik und Poliklinik fuer Diagnostische Radiologie, Universitaetsklinikum Leipzig (Germany); Schreiter, D. [Chirurgische Intensivtherapieabteilung, Zentrum fuer Chirurgie, Universitaetsklinikum Leipzig (Germany); Dietrich, J. [Abt. Neuroradiologie der Klinik und Poliklinik fuer Diagnostische Radiologie, Universitaetsklinikum Leipzig (Germany); Josten, C. [Klinik und Poliklinik fuer Unfall- und Wiederherstellungschirurgie, Zentrum fuer Chirurgie, Universitaetsklinikum Leipzig (Germany)

    2002-07-01

    In the early clinical phase the comprehensive imaging of patients with multiple trauma using helical CT is already established. Aim of this study was to assess whether MSCT may improve the patient management and the diagnostic results.The procedure is designed as follows: after life-thretening treatment x-ray of chest and ultrasound are carried out in the emergency room. Then the patient is moved to CT. From 1998 to december 2000 241 patients were examined using a single slice helical CT (Somatom plus 4), in 2001 79 patients using a 4-slice helical CT (Somatom VZ, Siemens Med.Sol.). After CT selected radiograms of the extremities were taken.359 of 360 procedures were carried out successfully. Excluding 1 case (death during 1-sl. h CT) all relevant lesions of head, neck, and body were diagnosed. Although the patients had an injury severity score of {approx}30. The change from 1slice-helical CT to 4 slice-helical CT allowed us to reduce the stay in the CT room from 28 to 16 min. The total lethality decreased by {approx}4%.Advantages for the patient arose from the standardized examination protocol using multislice CT. If integrated in an interdisciplinary management concept, it is a good compromise between examination time, comprehensive diagnostic imaging, life-saving therapeutic procedures, and therapy planning. (orig.) [German] Die klinische Erstversorgung Polytraumatisierter schliesst inzwischen in vielen Unfallkliniken den fruehzeitigen Einsatz der Spiral-CT ein. Kann die neuerlich eingefuehrte Mehrschicht-Spiral-CT Ergebnisse und Patientenmanagement weiter verbessern?Nach lebensrettenden Sofortmassnahmen, Thoraxroentgen und Notsonographie im Schockraum erfolgte die CT: Von 1998-2000 wurden 241 Patienten mit einem 1-Schicht-Spiral-CT (Somatom plus 4) und in 2001 79 Patienten mit einem 4-Schicht-Spiral-CT (Somatom VZ, beide Siemens Med. Sol.) untersucht. Klinisch ausgewaehlte Extremitaetenaufnahmen wurden ergaenzt.359 von 360 Untersuchungen verliefen erfolgreich

  8. Determination and calculation of hazardous incident scenarios in accordance with the 3rd hazardous incident administrative instruction. Vol. 2; Ermittlung und Berechnung von Stoerfallablaufszenarien nach Massgabe der 3. Stoerfallverwaltungsvorschrift. Bd. 2: Berechnungsmethoden, aktuelle Modelle und Modellgleichungen

    Energy Technology Data Exchange (ETDEWEB)

    Kaiser, W; Rogazewski, P; Schindler, M [TUeV Anlagentechnik GmbH, Berlin-Schoeneberg (Germany). Unternehmensgruppe TUeV Rheinland/Berlin-Brandenburg; Acikalin, A; Albrecht, M; Lambert, M; Steinbach, J [Technische Univ. Berlin (Germany)

    2000-07-01

    Stoerfaellen sowie zu Bedingungen des Standortes und der Anlage die erforderlichen Grundannahmen zum Stoerfallablauf gewinnen kann. Unterschieden nach Stofffreisetzungen, Explosionen und Braenden wird jeweils auf die konkreteren Hinweise im Anhang 1 zur Abschaetzung von Quelltermen, im Anhang 2 zur Abschaetzung der Ausbreitung und im Anhang 3 zur Abschaetzung der Auswirkungen verwiesen. Der Anhang 4 enthaelt einige Erlaeuterungen zu den Anhaengen 1 bis 3. Mit einer Sammlung von 15 Beispielen fuer Stoerfallablaufszenarien wird im Anhang 5 das im Leitfaden beschriebene methodische Vorgehen veranschaulicht und erlaeutert. Im Anhang 6 werden die auf dem deutschen Markt erhaeltlichen DV-Programme (Software) zur Berechnung von Stoerfallablaufszenarien beschrieben und kommentiert. Der Band 2 untermauert das Vorgehen im Hinblick auf Berechnungsmethoden, aktuelle Modelle und Modellgleichungen aus wissenschaftlicher Sicht. (orig.)

  9. Determination and calculation of hazardous incident scenarios in accordance with the 3rd hazardous incident administrative instruction. Vol. 1; Ermittlung und Berechnung von Stoerfallablaufszenarien nach Massgabe der 3. Stoerfallverwaltungsvorschrift. Bd. 1: Methodischer Teil zum Erarbeiten von Stoerfallablaufszenarien

    Energy Technology Data Exchange (ETDEWEB)

    Kaiser, W.; Rogazewski, P.; Schindler, M. [TUeV Anlagentechnik GmbH, Berlin-Schoeneberg (Germany). Unternehmensgruppe TUeV Rheinland/Berlin-Brandenburg; Acikalin, A.; Albrecht, M.; Lambert, M.; Steinbach, J. [Technische Univ. Berlin (Germany)

    2000-07-01

    Stoerfaellen sowie zu Bedingungen des Standortes und der Anlage die erforderlichen Grundannahmen zum Stoerfallablauf gewinnen kann. Unterschieden nach Stofffreisetzungen, Explosionen und Braenden wird jeweils auf die konkreteren Hinweise im Anhang 1 zur Abschaetzung von Quelltermen, im Anhang 2 zur Abschaetzung der Ausbreitung und im Anhang 3 zur Abschaetzung der Auswirkungen verwiesen. Der Anhang 4 enthaelt einige Erlaeuterungen zu den Anhaengen 1 bis 3. Mit einer Sammlung von 15 Beispielen fuer Stoerfallablaufszenarien wird im Anhang 5 das im Leitfaden beschriebene methodische Vorgehen veranschaulicht und erlaeutert. Im Anhang 6 werden die auf dem deutschen Markt erhaeltlichen DV-Programme (Software) zur Berechnung von Stoerfallablaufszenarien beschrieben und kommentiert. Der Band 2 untermauert das Vorgehen im Hinblick auf Berechnungsmethoden, aktuelle Modelle und Modellgleichungen aus wissenschaftlicher Sicht. (orig.)

  10. Assessment of cognitive functions after prophylactic and therapeutic whole brain irradiation using neuropsychological testing; Erfassung kognitiver Funktionen nach prophylaktischer und therapeutischer Ganzhirnbestrahlung mittels neuropsychologischer Testverfahren

    Energy Technology Data Exchange (ETDEWEB)

    Penitzka, S.; Wannenmacher, M. [Universitaetsklinikum Heidelberg (Germany). Abt. Klinische Radiologie; Steinvorth, S. [Universitaetsklinikum Heidelberg (Germany). Abt. Klinische Radiologie; MIT, Cambridge, MT (United States). Dept. of Brain and Cognitive Sciences; Sehlleier, S. [Universitaetsklinikum Heidelberg (Germany). Abt. Klinische Radiologie; Universitaetsklinikum Wuerzburg (Germany). Abt. Strahlentherapie; Fuss, M. [Universitaetsklinikum Heidelberg (Germany). Abt. Klinische Radiologie; Texas Univ., San Antonio, TX (United States). Health Science Center; Wenz, F. [Universitaetsklinikum Heidelberg (Germany). Abt. Klinische Radiologie; Universitaetsklinikum Mannheim (Germany). Sektion Radioonkologie

    2002-05-01

    Purpose: Aim of this study was the assessment of neuropsychological changes after whole brain irradiation. Patients and Method: 64 patients were tested before, and 29 after whole brain irradiation, including 28 patients with small cell lung cancer (SCLC) before prophylactic cranial irradiation (PCI) and 36 patients with cerebral metastases before therapeutic cranial irradiation (TCI), as well as 14 patients after PCI and 15 after TCI (Table 1). Intelligence, attention and memory were assessed applying a 90-minute test battery of standardized, neuropsychological tests (Table 3). Results: Patients with SCLC showed test results significantly below average before PCI (n=28, mean IQ=83, SD=17). Neither after PCI, nor after TCI the tested neuropsychological functions decreased significantly (Tables 4, 5). A comparison between SCLC-patients with and without cerebral metastases before whole brain irradiation showed better test-results in patients with cerebral metastases and fewer cycles of preceding chemotherapy (Table 7). Conclusion: Neuropsychological capacity in patients with SCLC was impaired even before PCI. Possible reason is the preceding chemotherapy. Whole brain irradiation did not induce a significant decline of cognitive functions in patients with PCI or TCI. A decline in a longer follow-up nevertheless seems possible. (orig.) [German] Zielsetzung: Ziel der Studie war die Erfassung moeglicher Veraenderungen der neuropsychologischen Leistungsfaehigkeit nach Ganzhirnbestrahlung. Patienten und Methode: Untersucht wurden 64 Patienten vor und 29 Patienten nach Ganzhirnbestrahlung. Es handelte sich um 28 Patienten mit kleinzelligem Bronchialkarzinom (SCLC) vor prophylaktischer Ganzhirnbestrahlung (PCI) und um 36 Patienten mit Hirnmetastasen vor therapeutischer Ganzhirnbestrahlung (TCI). Es wurden 14 Patienten nach PCI und 15 Patienten nach TCI getestet. Zur Anwendung kam eine 90-minuetige Testbatterie standardisierter, neuropsychologischer Testverfahren zur Messung

  11. Predictive parameters of infectiologic complications in patients after TIPSS; Praediktive Parameter infektiologischer Komplikationen bei Patienten nach TIPSS-Anlage

    Energy Technology Data Exchange (ETDEWEB)

    Cohnen, M.; Saleh, A.; Moedder, U. [Institut fuer Diagnostische Radiologie, Universitaetsklinikum Duesseldorf (Germany); Luethen, R.; Bode, J.; Haeussinger, D. [Klinik fuer Gastroenterologie, Hepatologie und Infektiologie, Universitaetsklinikum Duesseldorf (Germany); Daeubener, W. [Institut fuer Mikrobiologie und Virologie, Universitaetsklinikum Duesseldorf (Germany)

    2003-02-01

    Aim To define predictive parameters of a complicated clinical course after the TIPSS procedure. Blood cultures were drawn prospectively in 41 patients from a central line and from the portal venous blood before stent placement as well as from the central line 20 min after intervention. C-reactive proteine (CRP) (mg/dl) and white blood cell count (WBC,/{mu}l) on the day of TIPSS-procedure (d0), the first (d1) and seven (d7) days after TIPSS were compared in patients with a complicated clinical course (spontaneous bacterial peritonitis, pneumonia, sepsis; group I) to patients without clinical complications (group II) Group I showed a significant increase in CRP (d0: 1.8{+-}1.0; d1: 3.2{+-}1.5; d7: 4.3{+-}3.2), and white blood cell count (d0: 7700{+-}2600; d1: 10800{+-}2800; d7: 7500{+-}1800) on the first day after TIPSS-procedure in comparison to group II (CRP: d0: 1.6{+-}0.6; d1: 1.8{+-}1.0; d7: 1.9{+-}0.6. WBC: d0: 6900{+-}1500; d1: 8000{+-}1600; d7: 7600{+-}1400).Microbiological analysis showed in 12% skin or oral flora in the last sample. The course of CRP and WBC-count during the first week after TIPSS procedure may indicate patients with a potential risk of a complicated clinical course. (orig.) [German] Fragestellung Definition praediktiver Parameter infektiologischer Komplikationen bei Patienten nach TIPSS-Anlage.Methodik Bei 41 Patienten wurden Blutproben prospektiv vor intrahepatischer Stentanlage zentralvenoes und portalvenoes sowie 20 min postinterventionell erneut zentralvenoes entnommen und mikrobiologisch analysiert. C-reaktives Protein (CRP) (mg/dl) und Leukozytenzahl (/{mu}l) wurden am Interventionstag (d0), am 1. (d1) sowie 7 Tage (d7) postinterventionell bestimmt. Patienten mit kompliziertem Verlauf (spontane bakterielle Peritonitis,Pneumonie, Sepsis; Gruppe 1) wurden von Patienten ohne klinische Komplikationen (Gruppe 2) unterschieden.Ergebnisse Gruppe 1 wies einen signifikanten Anstieg des CRP (d0: 1,8{+-}1,0; d1: 3,2{+-}1,5; d7: 4,3{+-}3,2) und

  12. Acute environmental toxicity and persistence of DEM, a chemical agent simulant: Diethyl malonate. [Diethyl malonate

    Energy Technology Data Exchange (ETDEWEB)

    Cataldo, D.A.; Ligotke, M.W.; Harvey, S.D.; Fellows, R.J.; Li, Shu-mei W.; Van Voris, P.; Wentsel, R.S.

    1990-05-01

    The purpose of the following chemical simulant studies is to assess the potential acute environmental effects and persistence of diethyl malonate (DEM). Deposition velocities for DEM to soil surfaces ranged from 0.04 to 0.2 cm/sec. For foliar surfaces, deposition velocities ranged from 0.0002 cm/sec at low air concentrations to 0.05 cm/sec for high dose levels. The residence times or half-lives of DEM deposited to soils was 2 h for the fast component and 5 to 16 h for the residual material. DEM deposited to foliar surfaces also exhibited biphasic depuration. The half-life of the short residence time component ranged from 1 to 3 h, while the longer time component had half-times of 16 to 242 h. Volatilization and other depuration mechanisms reduce surface contaminant levels in both soils and foliage to less than 1% of initial dose within 96 h. DEM is not phytotoxic at foliar mass loading levels of less than 10 {mu}m/cm{sup 2}. However, severe damage is evident at mass loading levels in excess of 17 {mu}g/cm{sup 2}. Tall fescue and sagebrush were more affected than was short-needle pine, however, mass loading levels were markedly different. Regrowth of tall fescue indicated that the effects of DEM are residual, and growth rates are affected only at higher mass loadings through the second harvest. Results from in vitro testing of DEM indicated concentrations below 500 {mu}g/g dry soil generally did not negatively impact soil microbial activity. Short-term effects of DEM were more profound on soil dehydrogenase activity than on soil phosphatase activity. No enzyme inhibition or enhancement was observed after 28 days in incubation. Results of the earthworm bioassay indicate survival to be 86 and 66% at soil doses of 107 and 204 {mu}g DEM/cm{sup 2}, respectively. At higher dose level, activity or mobility was judged to be affected in over 50% of the individuals. 21 refs., 10 figs., 15 tabs.

  13. MR imaging of the lateral collateral ligaments after ankle sprain; Aussenbandrupturen des Sprunggelenkes - Darstellung mit der MRT vor und nach funktioneller Therapie

    Energy Technology Data Exchange (ETDEWEB)

    Grebe, P. [Klinik fuer Radiologie der Universitaetsklinik, Mainz (Germany); Kreitner, K.F. [Klinik fuer Radiologie der Universitaetsklinik, Mainz (Germany); Roeder, W. [Abt. fuer Chirurgie, St-Hildegardis-Krankenhaus, Mainz (Germany); Kersjes, W. [Klinik fuer Radiologie der Universitaetsklinik, Mainz (Germany); Hennes, R. [Abt. fuer Allgemein- und Unfallchirurgie, St. Josefshospital, Wiesbaden (Germany); Runkel, M. [Unfallchirurgische Klinik der Unversitaetsklinik, Mainz (Germany)

    1995-09-01

    35 patients with ankle sprain were examined by MRI and stress radiographs. 13 were operated afterwards, 22 patients underwent a functional conservative therapy and were examined by MRI and stress radiographs and second time after three months. MRI reports were correct in 12 of 13 operated cases. After conservative therapy we did not find any disrupted ankle ligament. MRI showed intact ligaments thickened by scar. (orig./MG) [Deutsch] 35 Patienten mit klinischem Verdacht auf Aussenbandruptur wurden mit der MRT untersucht. 13 Patienten wurden operiert, 22 konzervativ therapiert. Letztere wurden nach drei Monaten erneut mit MRT und gehaltenen Aufnahmen untersucht. Die MRT-Befunde stimmten in 12 von 13 Faellen mit den operativ erhobenen Befunden ueberein. Nach dreimonatiger konzervativer Therapie waren alle 22 Sprunggelenke stabil. Die rupturierten Baender stellten sich verdickt und durchgaengig dar. (orig./MG)

  14. Dem Generation from Close-Range Photogrammetry Using Extended Python Photogrammetry Toolbox

    Science.gov (United States)

    Belmonte, A. A.; Biong, M. M. P.; Macatulad, E. G.

    2017-10-01

    Digital elevation models (DEMs) are widely used raster data for different applications concerning terrain, such as for flood modelling, viewshed analysis, mining, land development, engineering design projects, to name a few. DEMs can be obtained through various methods, including topographic survey, LiDAR or photogrammetry, and internet sources. Terrestrial close-range photogrammetry is one of the alternative methods to produce DEMs through the processing of images using photogrammetry software. There are already powerful photogrammetry software that are commercially-available and can produce high-accuracy DEMs. However, this entails corresponding cost. Although, some of these software have free or demo trials, these trials have limits in their usable features and usage time. One alternative is the use of free and open-source software (FOSS), such as the Python Photogrammetry Toolbox (PPT), which provides an interface for performing photogrammetric processes implemented through python script. For relatively small areas such as in mining or construction excavation, a relatively inexpensive, fast and accurate method would be advantageous. In this study, PPT was used to generate 3D point cloud data from images of an open pit excavation. The PPT was extended to add an algorithm converting the generated point cloud data into a usable DEM.

  15. Uncertainty modelling and analysis of volume calculations based on a regular grid digital elevation model (DEM)

    Science.gov (United States)

    Li, Chang; Wang, Qing; Shi, Wenzhong; Zhao, Sisi

    2018-05-01

    The accuracy of earthwork calculations that compute terrain volume is critical to digital terrain analysis (DTA). The uncertainties in volume calculations (VCs) based on a DEM are primarily related to three factors: 1) model error (ME), which is caused by an adopted algorithm for a VC model, 2) discrete error (DE), which is usually caused by DEM resolution and terrain complexity, and 3) propagation error (PE), which is caused by the variables' error. Based on these factors, the uncertainty modelling and analysis of VCs based on a regular grid DEM are investigated in this paper. Especially, how to quantify the uncertainty of VCs is proposed by a confidence interval based on truncation error (TE). In the experiments, the trapezoidal double rule (TDR) and Simpson's double rule (SDR) were used to calculate volume, where the TE is the major ME, and six simulated regular grid DEMs with different terrain complexity and resolution (i.e. DE) were generated by a Gauss synthetic surface to easily obtain the theoretical true value and eliminate the interference of data errors. For PE, Monte-Carlo simulation techniques and spatial autocorrelation were used to represent DEM uncertainty. This study can enrich uncertainty modelling and analysis-related theories of geographic information science.

  16. Identification and delineation of areas flood hazard using high accuracy of DEM data

    Science.gov (United States)

    Riadi, B.; Barus, B.; Widiatmaka; Yanuar, M. J. P.; Pramudya, B.

    2018-05-01

    Flood incidents that often occur in Karawang regency need to be mitigated. These expectations exist on technologies that can predict, anticipate and reduce disaster risks. Flood modeling techniques using Digital Elevation Model (DEM) data can be applied in mitigation activities. High accuracy DEM data used in modeling, will result in better flooding flood models. The result of high accuracy DEM data processing will yield information about surface morphology which can be used to identify indication of flood hazard area. The purpose of this study was to identify and describe flood hazard areas by identifying wetland areas using DEM data and Landsat-8 images. TerraSAR-X high-resolution data is used to detect wetlands from landscapes, while land cover is identified by Landsat image data. The Topography Wetness Index (TWI) method is used to detect and identify wetland areas with basic DEM data, while for land cover analysis using Tasseled Cap Transformation (TCT) method. The result of TWI modeling yields information about potential land of flood. Overlay TWI map with land cover map that produces information that in Karawang regency the most vulnerable areas occur flooding in rice fields. The spatial accuracy of the flood hazard area in this study was 87%.

  17. Automatic relative RPC image model bias compensation through hierarchical image matching for improving DEM quality

    Science.gov (United States)

    Noh, Myoung-Jong; Howat, Ian M.

    2018-02-01

    The quality and efficiency of automated Digital Elevation Model (DEM) extraction from stereoscopic satellite imagery is critically dependent on the accuracy of the sensor model used for co-locating pixels between stereo-pair images. In the absence of ground control or manual tie point selection, errors in the sensor models must be compensated with increased matching search-spaces, increasing both the computation time and the likelihood of spurious matches. Here we present an algorithm for automatically determining and compensating the relative bias in Rational Polynomial Coefficients (RPCs) between stereo-pairs utilizing hierarchical, sub-pixel image matching in object space. We demonstrate the algorithm using a suite of image stereo-pairs from multiple satellites over a range stereo-photogrammetrically challenging polar terrains. Besides providing a validation of the effectiveness of the algorithm for improving DEM quality, experiments with prescribed sensor model errors yield insight into the dependence of DEM characteristics and quality on relative sensor model bias. This algorithm is included in the Surface Extraction through TIN-based Search-space Minimization (SETSM) DEM extraction software package, which is the primary software used for the U.S. National Science Foundation ArcticDEM and Reference Elevation Model of Antarctica (REMA) products.

  18. TecDEM: A MATLAB Based Toolbox for understanding Tectonics from Digital Elevation Models

    Science.gov (United States)

    Shahzad, F.; Mahmood, S. A.; Gloaguen, R.

    2009-04-01

    TecDEM is a MATLAB based tool box for understanding the tectonics from digital elevation models (DEMs) of any area. These DEMs can be derived from data of any spatial resolution (Low, medium and High). In the first step we extract drainage network from the DEMs using flow grid approach. Drainage network is a group of streams having elevation and catchment area information as a function of spatial locations. We implement an array of stream structure to study this drainage network. Knickpoints can be identified on each stream of the drainage network by a graphical user interface and are helpful for understanding stream morphology. Stream profile analysis in steady state condition is applied on all streams to calculate geomorphic parameters and regional uplift rates. Hack index is calculated for all the profiles at a certain interval and over the change of knickpoints. Reports menu of this tool box generates detailed statistics report, complete tabulated report, graphical output of each analyzed stream profile and Hack index profile. All the calculated values are part of stream structure and is saved as .mat file for later use with this tool box. The spatial distribution of geomorphic parameters, uplift rates and knickpoints are exported as a shape files for visualization in professional GIS software. We test this tool box on DEMs from different tectonic settings worldwide and received verifiable results with other studies.

  19. Radiological findings, evaluation and treatment of patellofemoral pain after total knee arthroplasty; Radiologische Diagnostik, Beurteilung und Behandlung des patellofemoralen Schmerzes nach primaerer Knieendoprothetik

    Energy Technology Data Exchange (ETDEWEB)

    Springorum, H.R.; Keshmiri, A.; Heers, G.; Renkawitz, T.; Grifka, J.; Baier, C. [Asklepios Klinikum Bad Abbach, Orthopaedische Klinik fuer die Universitaet Regensburg, Bad Abbach (Germany)

    2012-11-15

    Total knee arthroplasty (TKA) is one of the most successful operative procedures over the last decades in orthopedic surgery; however, some patients suffer from pain, limited range of motion, instability, infections or other complications postoperatively. Patellofemoral pain (PFP) in particular is a common problem after TKA and often necessitates revision surgery. Mainly increasing and localized contact pressure and patella maltracking are held responsible for PFP but the reasons vary. Diagnostics and therapy of PFP is not easy to manage and should be treated following a clinical pathway. The authors suggest that patients with PFP should be categorized after basic diagnostic measures according to the suspected diagnosis: (1) tendinosis, (2) mechanical reasons, (3) intra-articular non-mechanical reasons and (4) neurogenic/psychiatric reasons. Efficient application of special diagnostic measures and further therapy is facilitated by this classification. (orig.) [German] Die endoprothetische Versorgung des Kniegelenks ist eine Operation mit hohem Zugewinn an Lebensqualitaet. Dennoch sind je nach Literaturstelle bis zu 50% der Patienten von Schmerzen, Bewegungseinschraenkung, Instabilitaet, Infektion oder anderen Komplikationen betroffen. Insbesondere der patellofemorale Schmerz (PFS) ist eine haeufige Komplikation nach primaerer Knieendoprothetik und wird je nach Literatur mit 1-50% der Faelle angegeben. Insbesondere der erhoehte retropatellare Anpressdruck und eine schlechte Fuehrung der Patella werden fuer den PFS verantwortlich gemacht, doch die Ursachen sind vielfaeltig. Diagnostik und Behandlung sind komplex und sollten strukturiert durchgefuehrt werden. Nach der Basisdiagnostik schlagen die Autoren daher eine Einteilung in eine der 4 Gruppen vor: (1) Tendinosen, (2) mechanische Probleme, (3) intraartikulaere nichtmechanische Probleme, (4) neurogene/psychische Probleme. Durch die Einteilung in diese verschiedenen Gruppen werden eine effiziente spezielle

  20. FUSION OF MULTI-SCALE DEMS FROM DESCENT AND NAVCM IMAGES OF CHANG’E-3 USING COMPRESSED SENSING METHOD

    Directory of Open Access Journals (Sweden)

    M. Peng

    2017-07-01

    Full Text Available The multi-source DEMs generated using the images acquired in the descent and landing phase and after landing contain supplementary information, and this makes it possible and beneficial to produce a higher-quality DEM through fusing the multi-scale DEMs. The proposed fusion method consists of three steps. First, source DEMs are split into small DEM patches, then the DEM patches are classified into a few groups by local density peaks clustering. Next, the grouped DEM patches are used for sub-dictionary learning by stochastic coordinate coding. The trained sub-dictionaries are combined into a dictionary for sparse representation. Finally, the simultaneous orthogonal matching pursuit (SOMP algorithm is used to achieve sparse representation. We use the real DEMs generated from Chang’e-3 descent images and navigation camera (Navcam stereo images to validate the proposed method. Through the experiments, we have reconstructed a seamless DEM with the highest resolution and the largest spatial coverage among the input data. The experimental results demonstrated the feasibility of the proposed method.

  1. Öffentliche Wohnraumförderung — auf dem richtigen Weg?

    OpenAIRE

    van Suntum, Ulrich; Gedaschko, Axel; Voigtländer, Michael; Schrooten, Mechthild; Theurl, Theresia

    2016-01-01

    Die hohen Flüchtlingszahlen und die wachsende Nachfrage nach Wohnungen in den Ballungsräumen haben die Politik veranlasst, die lange vernachlässigte öffentliche Wohnraumförderung wieder in den Blick zu nehmen. Um rasch neuen Wohnraum anzubieten, schlagen die Autoren unterschiedliche Maßnahmen vor. Dabei kommt es darauf an, sie effizient auf die Zielgruppe zuzuschneiden. Welche Gewichtung die Objekt- und die Subjektförderung dabei haben sollte, wird unterschiedlich bewertet. Genossenschaften s...

  2. Blaze-DEMGPU: Modular high performance DEM framework for the GPU architecture

    Directory of Open Access Journals (Sweden)

    Nicolin Govender

    2016-01-01

    Full Text Available Blaze-DEMGPU is a modular GPU based discrete element method (DEM framework that supports polyhedral shaped particles. The high level performance is attributed to the light weight and Single Instruction Multiple Data (SIMD that the GPU architecture offers. Blaze-DEMGPU offers suitable algorithms to conduct DEM simulations on the GPU and these algorithms can be extended and modified. Since a large number of scientific simulations are particle based, many of the algorithms and strategies for GPU implementation present in Blaze-DEMGPU can be applied to other fields. Blaze-DEMGPU will make it easier for new researchers to use high performance GPU computing as well as stimulate wider GPU research efforts by the DEM community.

  3. Granular dynamics, contact mechanics and particle system simulations a DEM study

    CERN Document Server

    Thornton, Colin

    2015-01-01

    This book is devoted to the Discrete Element Method (DEM) technique, a discontinuum modelling approach that takes into account the fact that granular materials are composed of discrete particles which interact with each other at the microscale level. This numerical simulation technique can be used both for dispersed systems in which the particle-particle interactions are collisional and compact systems of particles with multiple enduring contacts. The book provides an extensive and detailed explanation of the theoretical background of DEM. Contact mechanics theories for elastic, elastic-plastic, adhesive elastic and adhesive elastic-plastic particle-particle interactions are presented. Other contact force models are also discussed, including corrections to some of these models as described in the literature, and important areas of further research are identified. A key issue in DEM simulations is whether or not a code can reliably simulate the simplest of systems, namely the single particle oblique impact wit...

  4. Diagnostic of the temperature and differential emission measure (DEM based on Hinode/XRT data

    Directory of Open Access Journals (Sweden)

    P. Rudawy

    2008-10-01

    Full Text Available We discuss here various methodologies and an optimal strategy of the temperature and emission measure diagnostics based on Hinode X-Ray Telescope data. As an example of our results we present the determination of the temperature distribution of the X-rays emitting plasma using a filters ratio method and three various methods of the calculation of the differential emission measure (DEM. We have found that all these methods give results similar to the two filters ratio method. Additionally, all methods of the DEM calculation gave similar solutions. We can state that the majority of the pairs of the Hinode filters allows one to derive the temperature and emission measure in the isothermal plasma approximation using standard diagnostics based on the two filters ratio method. In cases of strong flares one can also expect good conformity of the results obtained using a Withbroe – Sylwester, genetic algorithm and least-squares methods of the DEM evaluation.

  5. FEM × DEM: a new efficient multi-scale approach for geotechnical problems with strain localization

    Directory of Open Access Journals (Sweden)

    Nguyen Trung Kien

    2017-01-01

    Full Text Available The paper presents a multi-scale modeling of Boundary Value Problem (BVP approach involving cohesive-frictional granular materials in the FEM × DEM multi-scale framework. On the DEM side, a 3D model is defined based on the interactions of spherical particles. This DEM model is built through a numerical homogenization process applied to a Volume Element (VE. It is then paired with a Finite Element code. Using this numerical tool that combines two scales within the same framework, we conducted simulations of biaxial and pressuremeter tests on a cohesive-frictional granular medium. In these cases, it is known that strain localization does occur at the macroscopic level, but since FEMs suffer from severe mesh dependency as soon as shear band starts to develop, the second gradient regularization technique has been used. As a consequence, the objectivity of the computation with respect to mesh dependency is restored.

  6. Progress report within the series of GRS-F progress reports on reactor safety, sponsored by the Federal Ministry of Economics and Labour. Period: 1 July - 31 December 2003; Berichte ueber vom Bundesministerium fuer Wirtschaft und Arbeit gefoerderte Forschungsvorhaben auf dem Gebiet der Reaktorsicherheit. Berichtszeitraum: 01. Juli - 31. Dezember 2003

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    The Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) mbH, by order of the BMWi, continuously issues information on the status of the investigations into the safety of nuclear power plants by publishing semi-annual and annual progress reports within the series of GRS-F-Fortschrittsberichte (GRS-F-Progress Reports). Each progress report represents a compilation of individual reports about the objectives, work performed, results achieved, next steps of the work etc. The individual reports are prepared in a standard form by the research organisations themselves as documentation of their progress in work and are published by the Research Management Division of GRS within the framework of general information on the progress in reactor safety research. The compilation of the reports is classified according to general topics related to reactor safety research. Further, use is made of the classification system ''Joint Safety Research Index'' of the CEC (commission of the european communities). The reports are arranged in sequence of their project numbers. (orig.) [German] Die Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) mbH informiert im Auftrag des BMWi halbjaehrlich und jaehrlich ueber den Stand der Untersuchungen zur Sicherheit von Kernreaktoren in den Fortschrittsberichten der GRS-F-Berichtsreihe. Jeder Fortschrittsbericht stellt eine Sammlung von Einzelberichten ueber Zielsetzung, durchgefuehrte Arbeiten, erzielte Ergebnisse, geplante Weiterarbeit etc. dar, die von den Forschungsstellen selbst als Dokumentation ihres Arbeitsfortschritts in einheitlicher Form erstellt und von der Forschungsbetreuung (FB) in der GRS im Rahmen der allgemeinen Information ueber die Fortschritte von Untersuchungen zur Reaktorsicherheit herausgegeben werden. Die inhaltliche Gliederung der Berichtssammlung erfolgt durch sachliche Zuordnung der Vorhaben zu uebergeordneten Themenbereichen der Reaktorsicherheitsforschung, ferner nach dem Klassifikationsschema

  7. Developmental Eye Movement (DEM Test Norms for Mandarin Chinese-Speaking Chinese Children.

    Directory of Open Access Journals (Sweden)

    Yachun Xie

    Full Text Available The Developmental Eye Movement (DEM test is commonly used as a clinical visual-verbal ocular motor assessment tool to screen and diagnose reading problems at the onset. No established norm exists for using the DEM test with Mandarin Chinese-speaking Chinese children. This study aims to establish the normative values of the DEM test for the Mandarin Chinese-speaking population in China; it also aims to compare the values with three other published norms for English-, Spanish-, and Cantonese-speaking Chinese children. A random stratified sampling method was used to recruit children from eight kindergartens and eight primary schools in the main urban and suburban areas of Nanjing. A total of 1,425 Mandarin Chinese-speaking children aged 5 to 12 years took the DEM test in Mandarin Chinese. A digital recorder was used to record the process. All of the subjects completed a symptomatology survey, and their DEM scores were determined by a trained tester. The scores were computed using the formula in the DEM manual, except that the "vertical scores" were adjusted by taking the vertical errors into consideration. The results were compared with the three other published norms. In our subjects, a general decrease with age was observed for the four eye movement indexes: vertical score, adjusted horizontal score, ratio, and total error. For both the vertical and adjusted horizontal scores, the Mandarin Chinese-speaking children completed the tests much more quickly than the norms for English- and Spanish-speaking children. However, the same group completed the test slightly more slowly than the norms for Cantonese-speaking children. The differences in the means were significant (P0.05; compared with Spanish-speaking children, the scores were statistically significant (P0.05. DEM norms may be affected by differences in language, cultural, and educational systems among various ethnicities. The norms of the DEM test are proposed for use with Mandarin Chinese

  8. How large is the Upper Indus Basin? The pitfalls of auto-delineation using DEMs

    Science.gov (United States)

    Khan, Asif; Richards, Keith S.; Parker, Geoffrey T.; McRobie, Allan; Mukhopadhyay, Biswajit

    2014-02-01

    Extraction of watershed areas from Digital Elevation Models (DEMs) is increasingly required in a variety of environmental analyses. It is facilitated by the availability of DEMs based on remotely sensed data, and by Geographical Information System (GIS) software. However, accurate delineation depends on the quality of the DEM and the methodology adopted. This paper considers automated and supervised delineation in a case study of the Upper Indus Basin (UIB), Pakistan, for which published estimates of the basin area show significant disagreement, ranging from 166,000 to 266,000 km2. Automated delineation used ArcGIS Archydro and hydrology tools applied to three good quality DEMs (two from SRTM data with 90m resolution, and one from 30m resolution ASTER data). Automatic delineation defined a basin area of c.440,000 km2 for the UIB, but included a large area of internal drainage in the western Tibetan Plateau. It is shown that discrepancies between different estimates reflect differences in the initial extent of the DEM used for watershed delineation, and the unchecked effect of iterative pit-filling of the DEM (going beyond the filling of erroneous pixels to filling entire closed basins). For the UIB we have identified critical points where spurious addition of catchment area has arisen, and use Google Earth to examine the geomorphology adjacent to these points, and also examine the basin boundary data provided by the HydroSHEDS database. We show that the Pangong Tso watershed and some other areas in the western Tibetan plateau are not part of the UIB, but are areas of internal drainage. Our best estimate of the area of the Upper Indus Basin (at Besham Qila) is 164,867 km2 based on the SRTM DEM, and 164,853 km2 using the ASTER DEM). This matches the catchment area measured by WAPDA SWHP. An important lesson from this investigation is that one should not rely on automated delineation, as iterative pit-filling can produce spurious drainage networks and basins, when

  9. Evaluation of fracturing process of soft rocks at great depth by AE measurement and DEM simulation

    International Nuclear Information System (INIS)

    Aoki, Kenji; Mito, Yoshitada; Kurokawa, Susumu; Matsui, Hiroya; Niunoya, Sumio; Minami, Masayuki

    2007-01-01

    The authors developed the stress-based evaluation system of EDZ by AE monitoring and Distinct Element Method (DEM) simulation. In order to apply this system to the soft rock site, the authors try to grasp the relationship between AE parameters, stress change and rock fracturing process by performing the high stiffness tri-axial compression tests including AE measurements on the soft rock samples, and its simulations by DEM using bonded particle model. As the result, it is found that change in predominant AE frequency is effective to evaluate fracturing process in sedimentary soft rocks, and the relationship between stress change and fracturing process is also clarified. (author)

  10. Rehkitzrettung mit dem Fliegenden Wildretter: Erfahrungen der ersten Feldeinsätze

    OpenAIRE

    Wimmer, Tilman; Israel, Martin; Haschberger, Peter; Weimann, Anita

    2013-01-01

    Der Fliegende Wildretter des Deutschen Zentrums für Luft- und Raumfahrt ist als prototypische Kleinserie seit dem Jahr 2010 erfolgreich in Deutsch-land und Österreich im Einsatz, um aus der Luft Wildtiere während der Wiesenmahd aufzuspüren, und diese so vor dem Tod durch das Mähwerk zu retten. Der Prototyp basiert auf einem ferngesteuerten Multikopter, der mit mehreren Kameras ausgestattet ist und damit im Flug zuverlässiger und wesentlich schneller Wildtiere er-kennen kann, als dies mit b...

  11. Tropical-forest biomass estimation at X-Band from the spaceborne TanDEM-X interferometer

    Science.gov (United States)

    R. Treuhaft; F. Goncalves; J.R. dos Santos; M. Keller; M. Palace; S.N. Madsen; F. Sullivan; P.M.L.A. Graca

    2014-01-01

    This letter reports the sensitivity of X-band interferometric synthetic aperture radar (InSAR) data from the first dual-spacecraft radar interferometer, TanDEM-X, to variations in tropical-forest aboveground biomass (AGB). It also reports the first tropical-forest AGB estimates fromTanDEM-X data. Tropical forests account for...

  12. High-Accuracy Tidal Flat Digital Elevation Model Construction Using TanDEM-X Science Phase Data

    Science.gov (United States)

    Lee, Seung-Kuk; Ryu, Joo-Hyung

    2017-01-01

    This study explored the feasibility of using TanDEM-X (TDX) interferometric observations of tidal flats for digital elevation model (DEM) construction. Our goal was to generate high-precision DEMs in tidal flat areas, because accurate intertidal zone data are essential for monitoring coastal environment sand erosion processes. To monitor dynamic coastal changes caused by waves, currents, and tides, very accurate DEMs with high spatial resolution are required. The bi- and monostatic modes of the TDX interferometer employed during the TDX science phase provided a great opportunity for highly accurate intertidal DEM construction using radar interferometry with no time lag (bistatic mode) or an approximately 10-s temporal baseline (monostatic mode) between the master and slave synthetic aperture radar image acquisitions. In this study, DEM construction in tidal flat areas was first optimized based on the TDX system parameters used in various TDX modes. We successfully generated intertidal zone DEMs with 57-m spatial resolutions and interferometric height accuracies better than 0.15 m for three representative tidal flats on the west coast of the Korean Peninsula. Finally, we validated these TDX DEMs against real-time kinematic-GPS measurements acquired in two tidal flat areas; the correlation coefficient was 0.97 with a root mean square error of 0.20 m.

  13. Development of a LiDAR derived digital elevation model (DEM) as Input to a METRANS geographic information system (GIS).

    Science.gov (United States)

    2011-05-01

    This report describes an assessment of digital elevation models (DEMs) derived from : LiDAR data for a subset of the Ports of Los Angeles and Long Beach. A methodology : based on Monte Carlo simulation was applied to investigate the accuracy of DEMs ...

  14. Illustrations to “Gespräche in dem Reiche derer Todten zwischen dem vortreflichen Moscowitischen Czaar Petro Magno und dem grossen Tyrannen Ivan Basilowiz II” (Peter the Great and Ivan the Terrible) by David Fassmann (1725)

    OpenAIRE

    Ekaterina A. Skvortcova

    2017-01-01

    The journal created by David Fassmann (1683–1744), Gespräche in dem Reiche derer Todten, edited in Leipzig, was a huge success. Each of the 240 issues presents a dialogue between two historical figures from the afterworld. In the 83rd–86th Entrevuë, the interlocutors are Peter the Great and Ivan the Terrible. The texts of the four conversations were thoroughly examined by Eckhard Matthes (1987). The present paper explores how the illustrations to the 83rd–86th Entrevuë visualize the texts, w...

  15. The DAQ system of OPERA experiment and its specifications for the spectrometers

    International Nuclear Information System (INIS)

    Dusini, S.; Barichello, G.; Dal Corso, F.; Felici, G.; Lindozzi, M.; Stalio, S.; Sorrentino, G.

    2004-01-01

    We present an overview of the data acquisition system (DAQ) and event building of OPERA. OPERA is a long baseline neutrino experiment with a high modularity detector and low event rate. To deal with these features a distributed DAQ system base on Ethernet standards for the data transfer has been chosen. A distributed GPS clock signal is used for synchronizations and time stamp of the data. This architecture allows very modular and flexible event building based on a software trigger strategy. We also present its specific application to the spectrometer sub-detector where RPC trackers are installed. Self-triggerability is a dedicated feature to be also sensitive to out-of-spill events and to possibly allow data taking before the official start of the experiment

  16. First neutrino events seen by the core of the OPERA experiment (CNGS) on 2 October 2007

    CERN Multimedia

    2007-01-01

    The reconstruction of the core of a neutrino interaction at OPERA. The neutrino arriving from the left of the image has interacted with the lead of a brick, producing various particles identifiable by their tracks visible in the emulsion.

  17. First events from the CNGS neutrino beam detected in the OPERA experiment

    CERN Document Server

    Acquafredda, R.; Ambrosio, M.; Anokhina, A.; Aoki, S.; Ariga, A.; Arrabito, L.; Autiero, D.; Badertscher, A.; Bergnoli, A.; Bersani Greggio, F.; Besnier, M.; Beyer, M.; Bondil-Blin, S.; Borer, K.; Boucrot, J.; Boyarkin, V.; Bozza, C.; Brugnera, R.; Buontempo, S.; Caffari, Y.; Campagne, Jean-Eric; Carlus, B.; Carrara, E.; Cazes, A.; Chaussard, L.; Chernyavsky, M.; Chiarella, V.; Chon-Sen, N.; Chukanov, A.; Ciesielski, R.; Consiglio, L.; Cozzi, M.; Dal Corso, F.; D'Ambrosio, N.; Damet, J.; De Lellis, G.; Declais, Y.; Descombes, T.; De Serio, M.; Di Capua, F.; Di Ferdinando, D.; Di Giovanni, A.; Di Marco, N.; Di Troia, C.; Dmitrievski, S.; Dracos, M.; Duchesneau, D.; Dulach, B.; Dusini, S.; Ebert, J.; Enikeev, R.; Ereditato, A.; Esposito, L.S.; Fanin, C.; Favier, J.; Felici, G.; Ferber, T.; Fournier, L.; Franceschi, A.; Frekers, D.; Fukuda, T.; Fukushima, C.; Galkin, V.I.; Galkin, V.A.; Gallet, R.; Garfagnini, A.; Gaudiot, G.; Giacomelli, G.; Giarmana, O.; Giorgini, M.; Girard, L.; Girerd, C.; Goellnitz, C.; Goldberg, J.; Gornoushkin, Y.; Grella, G.; Grianti, F.; Guerin, C.; Guler, M.; Gustavino, C.; Hagner, C.; Hamane, T.; Hara, T.; Hauger, M.; Hess, M.; Hoshino, K.; Ieva, M.; Incurvati, M.; Jakovcic, K.; Janicsko Csathy, J.; Janutta, B.; Jollet, C.; Juget, F.; Kazuyama, M.; Kim, S.H.; Kimura, M.; Knuesel, J.; Kodama, K.; Kolev, D.; Komatsu, M.; Kose, U.; Krasnoperov, A.; Kreslo, I.; Krumstein, Z.; Laktineh, I.; de La Taille, C.; Le Flour, T.; Lieunard, S.; Ljubicic, A.; Longhin, A.; Malgin, A.; Manai, K.; Mandrioli, G.; Mantello, U.; Marotta, A.; Marteau, J.; Martin-Chassard, G.; Matveev, V.; Messina, M.; Meyer, L.; Micanovic, S.; Migliozzi, P.; Miyamoto, S.; Monacelli, Piero; Monteiro, I.; Morishima, K.; Moser, U.; Muciaccia, M.T.; Mugnier, P.; Naganawa, N.; Nakamura, M.; Nakano, T.; Napolitano, T.; Natsume, M.; Niwa, K.; Nonoyama, Y.; Nozdrin, A.; Ogawa, S.; Olchevski, A.; Orlandi, D.; Ossetski, D.; Paoloni, A.; Park, B.D.; Park, I.G.; Pastore, A.; Patrizii, L.; Pellegrino, L.; Pessard, H.; Pilipenko, V.; Pistillo, C.; Polukhina, N.; Pozzato, M.; Pretzl, K.; Publichenko, P.; Raux, L.; Repellin, J.P.; Roganova, T.; Romano, G.; Rosa, G.; Rubbia, A.; Ryasny, V.; Ryazhskaya, O.; Ryzhikov, D.; Sadovski, A.; Sanelli, C.; Sato, O.; Sato, Y.; Saveliev, V.; Savvinov, N.; Sazhina, G.; Schembri, A.; Schmidt Parzefall, W.; Schroeder, H.; Schutz, H.U.; Scotto Lavina, L.; Sewing, J.; Shibuya, H.; Simone, S.; Sioli, M.; Sirignano, C.; Sirri, G.; Song, J.S.; Spaeti, R.; Spinetti, M.; Stanco, L.; Starkov, N.; Stipcevic, M.; Strolin, Paolo Emilio; Sugonyaev, V.; Takahashi, S.; Tereschenko, V.; Terranova, F.; Tezuka, I.; Tioukov, V.; Tikhomirov, I.; Tolun, P.; Toshito, T.; Tsarev, V.; Tsenov, R.; Ugolino, U.; Ushida, N.; Van Beek, G.; Verguilov, V.; Vilain, P.; Votano, L.; Vuilleumier, J.L.; Waelchli, T.; Waldi, R.; Weber, M.; Wilquet, G.; Wonsak, B.; Wurth, R.; Wurtz, J.; Yakushev, V.; Yoon, C.S.; Zaitsev, Y.; Zamboni, I.; Zimmerman, R.

    2006-01-01

    The OPERA neutrino detector at the underground Gran Sasso Laboratory (LNGS) was designed to perform the first detection of neutrino oscillations in appearance mode, through the study of nu_mu to nu_tau oscillations. The apparatus consists of a lead/emulsion-film target complemented by electronic detectors. It is placed in the high-energy, long-baseline CERN to LNGS beam (CNGS) 730 km away from the neutrino source. In August 2006 a first run with CNGS neutrinos was successfully conducted. A first sample of neutrino events was collected, statistically consistent with the integrated beam intensity. After a brief description of the beam and of the various sub-detectors, we report on the achievement of this milestone, presenting the first data and some analysis results.

  18. Study of the effects induced by lead on the emulsion films of the OPERA experiment

    CERN Document Server

    Anokhina, A.; Ariga, A.; Arrabito, L.; Autiero, D.; Badertscher, A.; Bay, F.; Bergnoli, A.; Bersani Greggio, F.; Besnier, M.; Bick, D.; Bozza, C.; Brugiere, T.; Brugnera, R.; Brunetti, G.; Buontempo, S.; Carrara, E.; Cazes, A.; Chaussard, L.; Chernyavsky, M.; Chiarella, V.; Chon-Sen, N.; Chukanov, A.; Consiglio, L.; Cozzi, M.; Dal Corso, F.; D'Amato, G.; D'Ambrosio, N.; De Lellis, G.; Declais, Y.; De Serio, M.; Di Capua, F.; Di Ferdinando, D.; Di Giovanni, A.; Di Marco, N.; Di Troia, C.; Dmitrievski, S.; Dominjon, A.; Dracos, M.; Duchesneau, D.; Dulach, B.; Dusini, S.; Ebert, J.; Egorov, O.; Enikeev, R.; Ereditato, A.; Esposito, L.S.; Favier, J.; Felici, G.; Ferber, T.; Fini, R.; Franceschi, A.; Fukuda, T.; Fukushima, C.; Galkin, V.I.; Galkin, V.A.; Garfagnini, A.; Giacomelli, G.; Giorgini, M.; Goellnitz, C.; Golubkov, D.; Gornoushkin, Y.; Grella, G.; Grianti, F.; Guler, M.; Gusev, G.; Gustavino, C.; Hagner, Caren; Hara, T.; Hierholzer, M.; Hiramatsu, S.; Hoshino, Kaoru; Ieva, M.; Jakovcic, K.; Janicsko Csathy, J.; Janutta, B.; Jollet, C.; Juget, F.; Kawai, T.; Kazuyama, M.; Kim, S.H.; Kimura, M.; Knuesel, J.; Kodama, K.; Komatsu, M.; Kose, U.; Kreslo, I.; Laktineh, I.; Lazzaro, C.; Lenkeit, J.; Ljubicic, A.; Longhin, Andrea; Lutter, G.; Manai, K.; Mandrioli, G.; Manzoor, S.; Marotta, A.; Marteau, J.; Matsuoka, H.; Mauri, N.; Meisel, F.; Meregaglia, A.; Messina, M.; Migliozzi, P.; Miyamoto, S.; Monacelli, P.; Morishima, K.; Moser, U.; Muciaccia, M.T.; Naganawa, N.; Naka, T.; Nakamura, M.; Nakamura, T.; Nakano, T.; Nikitina, V.; Niwa, K.; Nonoyama, Y.; Ogawa, S.; Osedlo, V.; Ossetski, D.; Paoloni, A.; Park, B.D.; Park, I.G.; Pastore, A.; Patrizii, L.; Pennacchio, E.; Pessard, H.; Pistillo, C.; Polukhina, N.; Pozzato, M.; Pretzl, K.; Publichenko, P.; Pupilli, F.; Roganova, T.; Rosa, G.; Rostovtseva, I.; Rubbia, A.; Russo, A.; Ryazhskaya, O.; Ryzhikov, D.; Sato, Y.; Sato, O.; Saveliev, V.; Sazhina, G.; Schembri, A.; Scotto Lavina, L.; Shibuya, H.; Simone, S.; Sioli, M.; Sirignano, C.; Sirri, G.; Song, J.S.; Spinetti, M.; Stanco, L.; Starkov, N.; Stipcevic, M.; Strauss, T.; Strolin, Paolo Emilio; Sugonyaev, V.; Taira, Y.; Takahashi, S.; Tenti, M.; Terranova, F.; Tioukov, V.; Togo, V.; Tolun, P.; Tsarev, V.; Tufanli, S.; Ushida, N.; Valieri, C.; Vilain, P.; Vladimirov, M.; Votano, L.; Vuilleumier, J.L.; Wilquet, G.; Wonsak, B.; Wurtz, J.; Yoon, C.S.; Yoshida, J.; Zaitsev, Y.; Zemskova, S.; Zghiche, A.; Zimmermann, R.

    2008-01-01

    The OPERA neutrino oscillation experiment is based on the use of the Emulsion Cloud Chamber (ECC). In the OPERA ECC, nuclear emulsion films acting as very high precision tracking detectors are interleaved with lead plates providing a massive target for neutrino interactions. We report on studies related to the effects occurring from the contact between emulsion and lead. A low radioactivity lead is required in order to minimize the number of background tracks in emulsions and to achieve the required performance in the reconstruction of neutrino events. It was observed that adding other chemical elements to the lead, in order to improve the mechanical properties, may significantly increase the level of radioactivity on the emulsions. A detailed study was made in order to choose a lead alloy with good mechanical properties and an appropriate packing technique so as to have a low enough effective radioactivity.

  19. The FEDRA-Framework for emulsion data reconstruction and analysis in the OPERA experiment

    International Nuclear Information System (INIS)

    Tioukov, V.; Kreslo, I.; Petukhov, Y.; Sirri, G.

    2006-01-01

    OPERA is a massive lead/emulsion target for a long-baseline neutrino oscillation search. More than 90% of the useful experimental data in OPERA will be produced by the scanning of emulsion plates with the automatic microscopes. The main goal of the data processing in OPERA will be the search, analysis and identification of primary and secondary vertices produced by neutrino in lead-emulsion target. The volume of middle- and high-level data to be analysed and stored is expected to be of the order of several Gb per event. The storage, calibration, reconstruction, analysis and visualization of this data is the task of FEDRA system written in C ++ and based on ROOT framework. The system is now actively used for processing of test beams and simulation data. Several interesting algorithmic solutions permits us to make effective code for fast pattern recognition in heavy signal/noise conditions. The system consists of the storage part, intercalibration and segments linking part, track finding and fitting, vertex finding and fitting and kinematical analysis parts. Kalman Filtering technique is used for tracks and vertex fitting. ROOT-based event display is used for interactive analysis of the special events. iltering technique is used for tracks and vertex fitting. ROOT-based event display is used for interactive analysis of the special events

  20. Search for Tau Neutrinos in the τ → e Decay Channel in the OPERA Experiment

    OpenAIRE

    Hosseini, Behzad

    2015-01-01

    The OPERA (Oscillation Project with Emulsion tRacking Apparatus) experiment is a long baseline neutrino oscillation experiment that was designed to perform a conclusive test of the νμ → ντ oscillations hypothesis. The main aim of this experiment is a direct observation of τ leptons in ντ charged-current interactions. A good electromagnetic shower reconstruction is important for the τ detection in the τ → e decay channel. So far, 4 ντ candidates have been observed in the OPERA detector wi...

  1. DEM GPU studies of industrial scale particle simulations for granular flow civil engineering applications

    Science.gov (United States)

    Pizette, Patrick; Govender, Nicolin; Wilke, Daniel N.; Abriak, Nor-Edine

    2017-06-01

    The use of the Discrete Element Method (DEM) for industrial civil engineering industrial applications is currently limited due to the computational demands when large numbers of particles are considered. The graphics processing unit (GPU) with its highly parallelized hardware architecture shows potential to enable solution of civil engineering problems using discrete granular approaches. We demonstrate in this study the pratical utility of a validated GPU-enabled DEM modeling environment to simulate industrial scale granular problems. As illustration, the flow discharge of storage silos using 8 and 17 million particles is considered. DEM simulations have been performed to investigate the influence of particle size (equivalent size for the 20/40-mesh gravel) and induced shear stress for two hopper shapes. The preliminary results indicate that the shape of the hopper significantly influences the discharge rates for the same material. Specifically, this work shows that GPU-enabled DEM modeling environments can model industrial scale problems on a single portable computer within a day for 30 seconds of process time.

  2. DEM Simulation of Biaxial Compression Experiments of Inherently Anisotropic Granular Materials and the Boundary Effects

    Directory of Open Access Journals (Sweden)

    Zhao-Xia Tong

    2013-01-01

    Full Text Available The reliability of discrete element method (DEM numerical simulations is significantly dependent on the particle-scale parameters and boundary conditions. To verify the DEM models, two series of biaxial compression tests on ellipse-shaped steel rods are used. The comparisons on the stress-strain relationship, strength, and deformation pattern of experiments and simulations indicate that the DEM models are able to capture the key macro- and micromechanical behavior of inherently anisotropic granular materials with high fidelity. By using the validated DEM models, the boundary effects on the macrodeformation, strain localization, and nonuniformity of stress distribution inside the specimens are investigated using two rigid boundaries and one flexible boundary. The results demonstrate that the boundary condition plays a significant role on the stress-strain relationship and strength of granular materials with inherent fabric anisotropy if the stresses are calculated by the force applied on the wall. However, the responses of the particle assembly measured inside the specimens are almost the same with little influence from the boundary conditions. The peak friction angle obtained from the compression tests with flexible boundary represents the real friction angle of particle assembly. Due to the weak lateral constraints, the degree of stress nonuniformity under flexible boundary is higher than that under rigid boundary.

  3. An Optimal DEM Reconstruction Method for Linear Array Synthetic Aperture Radar Based on Variational Model

    Directory of Open Access Journals (Sweden)

    Shi Jun

    2015-02-01

    Full Text Available Downward-looking Linear Array Synthetic Aperture Radar (LASAR has many potential applications in the topographic mapping, disaster monitoring and reconnaissance applications, especially in the mountainous area. However, limited by the sizes of platforms, its resolution in the linear array direction is always far lower than those in the range and azimuth directions. This disadvantage leads to the blurring of Three-Dimensional (3D images in the linear array direction, and restricts the application of LASAR. To date, the research on 3D SAR image enhancement has focused on the sparse recovery technique. In this case, the one-to-one mapping of Digital Elevation Model (DEM brakes down. To overcome this, an optimal DEM reconstruction method for LASAR based on the variational model is discussed in an effort to optimize the DEM and the associated scattering coefficient map, and to minimize the Mean Square Error (MSE. Using simulation experiments, it is found that the variational model is more suitable for DEM enhancement applications to all kinds of terrains compared with the Orthogonal Matching Pursuit (OMPand Least Absolute Shrinkage and Selection Operator (LASSO methods.

  4. Modeling bubble heat transfer in gas-solid fluidized beds using DEM

    NARCIS (Netherlands)

    Patil, A.V.; Peters, E.A.J.F.; Kolkman, T.; Kuipers, J.A.M.

    2014-01-01

    Discrete element method (DEM) simulations of a pseudo 2-D fluidized bed at non-isothermal conditions are presented. First implementation details are discussed. This is followed by a validation study where heating of a packed column by a flow of heated fluid is considered. Next hot gas injected into

  5. Rockslide and Impulse Wave Modelling in the Vajont Reservoir by DEM-CFD Analyses

    Science.gov (United States)

    Zhao, T.; Utili, S.; Crosta, G. B.

    2016-06-01

    This paper investigates the generation of hydrodynamic water waves due to rockslides plunging into a water reservoir. Quasi-3D DEM analyses in plane strain by a coupled DEM-CFD code are adopted to simulate the rockslide from its onset to the impact with the still water and the subsequent generation of the wave. The employed numerical tools and upscaling of hydraulic properties allow predicting a physical response in broad agreement with the observations notwithstanding the assumptions and characteristics of the adopted methods. The results obtained by the DEM-CFD coupled approach are compared to those published in the literature and those presented by Crosta et al. (Landslide spreading, impulse waves and modelling of the Vajont rockslide. Rock mechanics, 2014) in a companion paper obtained through an ALE-FEM method. Analyses performed along two cross sections are representative of the limit conditions of the eastern and western slope sectors. The max rockslide average velocity and the water wave velocity reach ca. 22 and 20 m/s, respectively. The maximum computed run up amounts to ca. 120 and 170 m for the eastern and western lobe cross sections, respectively. These values are reasonably similar to those recorded during the event (i.e. ca. 130 and 190 m, respectively). Therefore, the overall study lays out a possible DEM-CFD framework for the modelling of the generation of the hydrodynamic wave due to the impact of a rapid moving rockslide or rock-debris avalanche.

  6. Landsat 5 TM images and DEM in lithologic mapping of Payen Volcanic Field (Mendoza Province, Argentina)

    International Nuclear Information System (INIS)

    Fornaciai, A.; Bisson, M.; Mazzarini, F.; Del Carlo, P.; Pasquare, G.

    2009-01-01

    Satellite image such as Landsat 5 TM scene provides excellent representation of Earth and synoptic view of large geographic areas in different band combination. Landsat TM images allow automatic and semi-automatic classification of land cover, nevertheless the software frequently may some difficulties in distinguishing between similar radiometric surfaces. In this case, the use of Digital Elevation Model (DEM) can be an important tool to identify different surface covers. In this study, several False Color Composite (FCC) of Landsat 5 TM Image, DEM and the respective draped image of them, were used to delineate lithological boundaries and tectonic features of regional significance of the Paven Volcanic Field (PVF). PFV is a Quaternary fissural structure belonging to the black-arc extensional areas of the Andes in the Mendoza Province (Argentina) characterized by many composite basaltic lava flow fields. The necessity to identify different lava flows with the same composition, and then with same spectral features, allows to highlight the improvement of synergic use of TM images and shaded DEM in the visual interpretation. Information obtained from Satellite data and DEM have been compared with previous geological maps and transferred into a topographical base map. Based on these data a new lithological map at 1:100.000 scale has been presented [it

  7. Discrete element simulation of mill charge in 3D using the BLAZE-DEM GPU framework

    CSIR Research Space (South Africa)

    Govender, Nicolin

    2015-08-01

    Full Text Available The Discrete Element Method (DEM) simulation of charge motion in ball, semi autogenous (SAG) and autogenous mills has advanced to a stage where the effects of lifter design, power draft and product size can be evaluated with sufficient accuracy...

  8. Die Geburt des Kosmos aus dem Nichts die Theorie des inflationären Universums

    CERN Document Server

    Guth, Alan

    2002-01-01

    Selten wird die Wissenschaft über Nacht so stark revolutioniert wie die Kosmologie durch Alan Guths Entdeckung der inflationären Theorie des Universums. Noch seltener gelingt es dem Urheber einer solchen Revolution, eine derart verständliche und einprägsame Darstellung von einer der aufregendsten Epochen in der modernen Kosmologie zu geben. Sogar Kenner werden Neues lernen.

  9. Kinematic behaviour of a large earthflow defined by surface displacement monitoring, DEM differencing, and ERT imaging

    Czech Academy of Sciences Publication Activity Database

    Prokešová, R.; Kardoš, M.; Tábořík, Petr; Medveďová, A.; Stacke, V.; Chudý, F.

    2014-01-01

    Roč. 224, NOV 1 (2014), s. 86-101 ISSN 0169-555X R&D Projects: GA MŠk LM2010008 Institutional support: RVO:67985891 Keywords : earthflow * surface displacement * strain modelling * DEM differencing * kinematic behaviour Subject RIV: DE - Earth Magnetism, Geodesy, Geography Impact factor: 2.577, year: 2013

  10. Impact of mesh and DEM resolutions in SEM simulation of 3D seismic response

    NARCIS (Netherlands)

    Khan, Saad; van der Meijde, M.; van der Werff, H.M.A.; Shafique, Muhammad

    2017-01-01

    This study shows that the resolution of a digital elevation model (DEM) and model mesh strongly influences 3D simulations of seismic response. Topographic heterogeneity scatters seismic waves and causes variation in seismic response (am-plification and deamplification of seismic amplitudes) at the

  11. Estimating Horizontal Displacement between DEMs by Means of Particle Image Velocimetry Techniques

    Directory of Open Access Journals (Sweden)

    Juan F. Reinoso

    2015-12-01

    Full Text Available To date, digital terrain model (DTM accuracy has been studied almost exclusively by computing its height variable. However, the largely ignored horizontal component bears a great influence on the positional accuracy of certain linear features, e.g., in hydrological features. In an effort to fill this gap, we propose a means of measurement different from the geomatic approach, involving fluid mechanics (water and air flows or aerodynamics. The particle image velocimetry (PIV algorithm is proposed as an estimator of horizontal differences between digital elevation models (DEM in grid format. After applying a scale factor to the displacement estimated by the PIV algorithm, the mean error predicted is around one-seventh of the cell size of the DEM with the greatest spatial resolution, and around one-nineteenth of the cell size of the DEM with the least spatial resolution. Our methodology allows all kinds of DTMs to be compared once they are transformed into DEM format, while also allowing comparison of data from diverse capture methods, i.e., LiDAR versus photogrammetric data sources.

  12. Use of DEMs Derived from TLS and HRSI Data for Landslide Feature Recognition

    Directory of Open Access Journals (Sweden)

    Maurizio Barbarella

    2018-04-01

    Full Text Available This paper addresses the problems arising from the use of data acquired with two different remote sensing techniques—high-resolution satellite imagery (HRSI and terrestrial laser scanning (TLS—for the extraction of digital elevation models (DEMs used in the geomorphological analysis and recognition of landslides, taking into account the uncertainties associated with DEM production. In order to obtain a georeferenced and edited point cloud, the two data sets require quite different processes, which are more complex for satellite images than for TLS data. The differences between the two processes are highlighted. The point clouds are interpolated on a DEM with a 1 m grid size using kriging. Starting from these DEMs, a number of contour, slope, and aspect maps are extracted, together with their associated uncertainty maps. Comparative analysis of selected landslide features drawn from the two data sources allows recognition and classification of hierarchical and multiscale landslide components. Taking into account the uncertainty related to the map enables areas to be located for which one data source was able to give more reliable results than another. Our case study is located in Southern Italy, in an area known for active landslides.

  13. Demência na doença de Parkinson Dementia in Parkinsn's disease

    Directory of Open Access Journals (Sweden)

    Leonardo Caixeta

    2008-12-01

    Full Text Available OBJETIVO: A presença de síndromes psiquiátricas, incluindo demência, associada a distúrbios motores tem sido cada vez mais reconhecida durante a última década, com destaque para o prejuízo cognitivo na doença de Parkinson idiopática. Esta revisão enfocará a epidemiologia, os aspectos clínicos, diagnósticos diferenciais, mecanismos subjacentes e o tratamento da demência na doença de Parkinson idiopática. MÉTODO: Uma revisão da literatura dos estudos que investigaram a demência da doença de Parkinson idiopática foi realizada. RESULTADOS: A demência é altamente prevalente na doença de Parkinson idiopática. O protótipo da demência na doença de Parkinson idiopática consiste numa síndrome disexecutiva com comprometimento da atenção, funções executivas e, secundariamente, a memória. Neuroquimicamente, o déficit mais significativo parece ser colinérgico; a demência se correlaciona com a presença de corpos de Lewy corticais e límbicos. Evidências preliminares sugerem que os anticolinesterásicos podem ser efetivos na demência da doença de Parkinson idiopática. CONCLUSÕES: O prejuízo cognitivo na doença de Parkinson idiopática é associado a características próprias e é responsável por importante incapacidade nestes pacientes.OBJECTIVE: The concomitant presence of psychiatric syndromes, including dementia, with motor disturbance has been increasingly recognized during the last decade, with emphasis on cognitive impairment in idiopatic Parkinson's disease. This review will focus on the epidemiology, clinical aspects, differential diagnosis, underlying mechanisms and treatment of dementia in Parkinson's disease. METHOD: A literature review of the studies that investigated the dementia in Parkinson's disease was performed. RESULTS: Dementia is highly prevalent in Parkinson's disease. The prototype of dementia in Parkinson's disease is a dysexecutive syndrome with impaired attention, executive functions and

  14. Effect of DEM resolution and comparison between different weighting factors for hydrologic connectivity index

    Science.gov (United States)

    Cantreul, Vincent; Cavalli, Marco; Degré, Aurore

    2016-04-01

    The emerging concept of hydrological connectivity is difficult to quantify. Some indices have been proposed. The most cited is Borselli's one. It mainly uses the DEM as input. The pixel size may strongly impacts the result of the calculation. It has not been studied yet in silty areas. Another important aspect is the choice of the weighting factor which strongly influences the index value. The objective of this poster is so to compare 8 different DEM's resolutions (12, 24, 48, 72, 96, 204, 504 and 996cm) and 3 different weighting factors (factor C of Wischmeier, Manning's factor and rugosity index) in the Borselli's index calculation. The IC was calculated in a 124ha catchment (Hevillers), in the loess belt, in Belgium. The DEM used is coming from a UAV with a maximum resolution of 12 cm. Permanent covered surfaces are not considered in order to avoid artefact due to the vegetation (2% of the surface). Regarding the DEM pixel size, the IC increases for a given pixel when the pixel size decreases. That confirms some results observed in the Alpine region by Cavalli (2014). The mean difference between 12 cm and 10 m resolution is 35% with higher values up to 100% for higher connectivity zones (flow paths). Another result is the lower impact of connections in the watershed (grass strips…) at lower pixel sizes. This is linked to the small width of some connections which are sometimes comparing to cell size. Furthermore, a great loss of precision is observed from the 500 cm pixel size and upper. That remark is quite intuitive. Finally, some very well disconnected zones appear for the highest resolutions. Regarding the weighting factor, IC values calculated using C factor are lower than with the rugosity index which is only a topographic factor. With very high resolution DEM, it permits to represent the fine topography. For the C factor, the zones up to very well disconnected areas (grass strips, wood…) are well represented with lower index values than downstream

  15. Feministische Gesellschaftstheorie und die Suche nach der Anschlussfähigkeit Feminist Social Theory in Search of Connections

    Directory of Open Access Journals (Sweden)

    Silke Schneider

    2002-07-01

    Full Text Available Der Sammelband „Soziale Verortung der Geschlechter“ stellt einen Querschnitt aktueller feministischer Theoriediskussionen vor. Dass bei der Suche nach angemessenen gesellschaftsanalytischen Kategorien sowohl die Klassiker/-innen der Politischen Theorie und Gesellschaftstheorie wie auch ihre Epigonen mannigfache Kritik-, aber auch vielversprechende Anschlußpunkte zu bieten haben, vermögen alle Beiträge zu vermitteln. Somit bietet der Band mit seiner breit angelegten Konzeption, die wichtige und durchaus gegensätzliche Theorien verbindet, einen guten Überblick und regt gleichzeitig zur vertiefenden Lektüre an. Bemerkenswert ist, dass nahezu alle Beiträge für eine Verbindung von Empirie und Theorie plädieren und hierbei die Einbeziehung einer historischen Perspektive als grundlegend und unabdingbar für eine Analyse der Geschlechterverhältnisse als Teil gesellschaftlicher Entwicklung erachtet wird.The anthology “The Social Positionings of Gender” presents a cross section of current debates in feminist theory. The authors show how authors of classical political and social theory as well as their successors offer plenty of room for criticism, but also promising starting points in the search for appropriate socio-analytic categories. This anthology not only offers a good overview over current theory by connecting different (and at times contradicting schools of thought, but also inspires to engage in further reading on these issues. What is particularly remarkable about this work is that almost all of the contributions plead for a combination of empirical research and theoretical work, as they consider the inclusion of a historical perspective as fundamental and indispensable for an analysis of gender relations as part of societal developments.

  16. DemQSAR: predicting human volume of distribution and clearance of drugs.

    Science.gov (United States)

    Demir-Kavuk, Ozgur; Bentzien, Jörg; Muegge, Ingo; Knapp, Ernst-Walter

    2011-12-01

    In silico methods characterizing molecular compounds with respect to pharmacologically relevant properties can accelerate the identification of new drugs and reduce their development costs. Quantitative structure-activity/-property relationship (QSAR/QSPR) correlate structure and physico-chemical properties of molecular compounds with a specific functional activity/property under study. Typically a large number of molecular features are generated for the compounds. In many cases the number of generated features exceeds the number of molecular compounds with known property values that are available for learning. Machine learning methods tend to overfit the training data in such situations, i.e. the method adjusts to very specific features of the training data, which are not characteristic for the considered property. This problem can be alleviated by diminishing the influence of unimportant, redundant or even misleading features. A better strategy is to eliminate such features completely. Ideally, a molecular property can be described by a small number of features that are chemically interpretable. The purpose of the present contribution is to provide a predictive modeling approach, which combines feature generation, feature selection, model building and control of overtraining into a single application called DemQSAR. DemQSAR is used to predict human volume of distribution (VD(ss)) and human clearance (CL). To control overtraining, quadratic and linear regularization terms were employed. A recursive feature selection approach is used to reduce the number of descriptors. The prediction performance is as good as the best predictions reported in the recent literature. The example presented here demonstrates that DemQSAR can generate a model that uses very few features while maintaining high predictive power. A standalone DemQSAR Java application for model building of any user defined property as well as a web interface for the prediction of human VD(ss) and CL is

  17. DEM GENERATION FROM HIGH RESOLUTION SATELLITE IMAGES THROUGH A NEW 3D LEAST SQUARES MATCHING ALGORITHM

    Directory of Open Access Journals (Sweden)

    T. Kim

    2012-09-01

    Full Text Available Automated generation of digital elevation models (DEMs from high resolution satellite images (HRSIs has been an active research topic for many years. However, stereo matching of HRSIs, in particular based on image-space search, is still difficult due to occlusions and building facades within them. Object-space matching schemes, proposed to overcome these problem, often are very time consuming and critical to the dimensions of voxels. In this paper, we tried a new least square matching (LSM algorithm that works in a 3D object space. The algorithm starts with an initial height value on one location of the object space. From this 3D point, the left and right image points are projected. The true height is calculated by iterative least squares estimation based on the grey level differences between the left and right patches centred on the projected left and right points. We tested the 3D LSM to the Worldview images over 'Terrassa Sud' provided by the ISPRS WG I/4. We also compared the performance of the 3D LSM with the correlation matching based on 2D image space and the correlation matching based on 3D object space. The accuracy of the DEM from each method was analysed against the ground truth. Test results showed that 3D LSM offers more accurate DEMs over the conventional matching algorithms. Results also showed that 3D LSM is sensitive to the accuracy of initial height value to start the estimation. We combined the 3D COM and 3D LSM for accurate and robust DEM generation from HRSIs. The major contribution of this paper is that we proposed and validated that LSM can be applied to object space and that the combination of 3D correlation and 3D LSM can be a good solution for automated DEM generation from HRSIs.

  18. Pyrrole and 2,5-heptanedione in the urine of rats and 2,5-heptanedione in the urine of man: analytical determination of excretion upon exposure to n-heptane; Pyrrole und 2,5-Heptandion im Urin der Ratte und 2,5-Heptandion im Urin des Menschen: Analytische Bestimmung der Ausscheidung nach Exposition gegn n-Heptan

    Energy Technology Data Exchange (ETDEWEB)

    Stoermer, A.G.C.

    1997-09-01

    A method for quantifying levels of the neurotoxic metabolite 2,5-heptanedione in rats and man after experimental exposure to n-heptane was developed. It consisted in determining the quantity of 2,5-heptanedione excreted in urine and the relevant excretion kinetics. Moreover, the excretion of pyrrole in the urine of rats was measured. In the urine of non-exposed rats and man, a basic excretion of 2,5-heptanedione was measured, with the rates of excretion being 0.11 and 4.5 nmol per hour, respectively. This basic excretion of 2,5-heptanedione is assumed to have an endogenous cause. The quantitive investigation of the dose dependence of the excretion of 2,5-heptanedione and pyrrole in the urine of rats and of 2,5-heptanedione in the urine of man is a prerequisite for assessing the risk posed by n-heptane with a view to peripheral neuropathies. (orig./MG) [Deutsch] Ziel dieser Arbeit war die Entwicklung einer Methode zur Quantifizierung der Belastung von Ratte und Mensch mit dem neurotoxischen Metaboliten 2,5-Heptandion nach experimentellen Expositionen gegen n-Heptan. Dazu sollte jeweils die ausgeschiedene Menge und die zugehoerige Ausscheidungskinetik von 2,5-Heptandion im Urin bestimmt werden. Darueber hinaus sollte die Ausscheidung von Pyrrolen im Urin von Ratten gemessen werden. Im Urin von nicht exponierten Ratten und Menschen wurde eine Grundausscheidung von 2,5-Heptandion gefunden, wobei die Ausscheidungsraten jeweils 0,11 bzw. 4,5 nmol/h betrugen. Fuer die Grundausscheidung von 2,5-Heptandion wird ein endogener Ursprung angenommen. Die quantitativen Untersuchungen zur Dosisabhaengigkeit der Ausscheidung im Urin von 2,5-Heptandion und Pyrrolen bei der Ratte und von 2,5-Heptandion beim Menschen sind eine Grundvoraussetzung fuer eine Abschaetzung des Risikos von n-Heptan fuer periphere Neuropathien. (orig./MG)

  19. Electric heat pump for motor vehicles with R744 (CO{sub 2}) as refrigerant; Elektrisch betriebene Waermepumpe fuer Fahrzeuge mit dem Kaeltemittel R744 (CO{sub 2})

    Energy Technology Data Exchange (ETDEWEB)

    Huenemoerder, W.; Kakehashi, N. [DENSO Automotive Deutschland GmbH, Eching (Germany)

    2003-07-01

    R744 (carbon dioxide) is suited for low ambient temperatures. A motor car air conditioner on this basis was developed for engines with low heat emissions. The passenger compartment is heated and cooled by a single system comprising a semihermetic electric compressor and three air-filled heat transfer units, i.e. an evaporator and a gas cooler for heating inside the car and a heat exchanger on the outside which can serve as evaporator or gas cooler as desired. The system can be operated in four modes: Heating without dehumidification, heating and dehumidification, cooling, thawing of the external heat exchanger. In contrast to conventional systems, the heating and cooling mode are not independent of each other, so a special control concept was developed which enables automatic operation of the four above modes of operation. The system is used in the Toyota FCHV fuel cell car. (orig.) [German] Das Kaeltemittel CO{sub 2} (R744) kann auch bei niederen Umgebungstemperaturen fuer Waermepumpenanwendungen eingesetzt werden. Eine CO{sub 2}-Klimaanlage mit Waermepumpe wurde fuer die Klimatisierung (Heizen, Kuehlen und Entfeuchten) des Fahrzeuginnenraumes entwickelt. Diese Anlage ist fuer Elektro- und Breenstoffzellenfahrzeuge geeignet, bei denen keine Motorabwaerme zu Heizzwecken zur Verfuegung steht. Heizen und Kuehlen des Innenraumes erfolgt durch ein einziges System unter Verwendung derselben Komponenten. Die Anlage besteht aus einem halbhermetischen elektrischen Verdichter und drei luftbeaufschlagten Waermeuebertragern - ein Verdampfer und ein Gaskuehler (zum Heizen) im Innenraum und ein Waermeuebertrager aussen, der - je nach Betriebsart - als Verdampfer oder Gaskuehler betrieben wird. Die Anlage kann in vier Betriebsarten betrieben werden: Heizen ohne Entfeuchtung, Heizen mit Entfeuchtung, Kuehlen, Abtauen des aeusseren Waermeuebertragers. In konventionellen Systemen koennen Heiz- und Kuehlsystem unabhaengig voneinander geregelt werden. Bei dem hier vorgestellten

  20. Bathymetry and Near-River Topography of the Naches and Yakima Rivers at Union Gap and Selah Gap, Yakima County, Washington, August 2008

    Science.gov (United States)

    Mastin, M.C.; Fosness, R.L.

    2009-01-01

    Yakima County is collaborating with the Bureau of Reclamation on a study of the hydraulics and sediment-transport in the lower Naches River and in the Yakima River between Union Gap and Selah Gap in Washington. River bathymetry and topographic data of the river channels are needed for the study to construct hydraulic models. River survey data were available for most of the study area, but river bathymetry and near-river topography were not available for Selah Gap, near the confluence of the Naches and Yakima Rivers, and for Union Gap. In August 2008, the U.S. Geological Survey surveyed the areas where data were not available. If possible, the surveys were made with a boat-mounted, single-beam echo sounder attached to a survey-grade Real-Time Kinematic (RTK) global positioning system (GPS). An RTK GPS rover was used on a walking survey of the river banks, shallow river areas, and river bed areas that were impenetrable to the echo sounder because of high densities of macrophytes. After the data were edited, 95,654 bathymetric points from the boat survey with the echo sounder and 1,069 points from the walking survey with the GPS rover were used in the study. The points covered 4.6 kilometers on the Yakima River and 0.6 kilometers on the Naches River. GPS-surveyed points checked within 0.014 to 0.047 meters in the horizontal direction and -0.036 to 0.078 meters in the vertical direction compared to previously established survey control points

  1. A new DEM of the Austfonna ice cap by combining differential SAR interferometry with ICESat laser altimetry

    Directory of Open Access Journals (Sweden)

    Geir Moholdt

    2012-05-01

    Full Text Available We present a new digital elevation model (DEM of the Austfonna ice cap in the Svalbard Archipelago, Norwegian Arctic. Previous DEMs derived from synthetic aperture radar (SAR and optical shape-from-shading have been tied to airborne radio echo-sounding surface profiles from 1983 which contain an elevation-dependent bias of up to several tens of metres compared with recent elevation data. The new and freely available DEM is constructed purely from spaceborne remote sensing data using differential SAR interferometry (DInSAR in combination with ICESat laser altimetry. Interferograms were generated from pairs of SAR scenes from the one-day repeat tandem phase of the European Remote Sensing Satellites 1/2 (ERS-1/2 in 1996. ICESat elevations from winter 2006–08 were used as ground control points to refine the interferometric baseline. The resulting DEM is validated against the same ground control points and independent surface elevation profiles from Global Navigation Satellite Systems (GNSS and airborne laser altimetry, yielding root mean square (RMS errors of about 10 m in all cases. This quality is sufficient for most glaciological applications, and the new DEM will be a baseline data set for ongoing and future research at Austfonna. The technique of combining satellite DInSAR with high-resolution satellite altimetry for DEM generation might also be a good solution in other glacier regions with similar characteristics, especially when data from TanDEM-X and CryoSat-2 become available.

  2. Assessment of neuro-optometric rehabilitation using the Developmental Eye Movement (DEM) test in adults with acquired brain injury.

    Science.gov (United States)

    Kapoor, Neera; Ciuffreda, Kenneth Joseph

    This pilot study sought to determine the efficacy of using the Developmental Eye Movement (DEM) test in the adult, acquired brain injury (ABI) population to quantify clinically the effects of controlled, laboratory-performed, oculomotor-based vision therapy/vision rehabilitation. Nine adult subjects with mild traumatic brain injury (mTBI) and five with stroke were assessed before and after an eight-week, computer-based, versional oculomotor (fixation, saccades, pursuit, and simulated reading) training program (9.6h total). The protocol incorporated a cross-over, interventional design with and without the addition of auditory feedback regarding two-dimensional eye position. The clinical outcome measure was the Developmental Eye Movement (DEM) test score (ratio, errors) taken before, midway, and immediately following training. For the DEM ratio parameter, improvements were found in 80-89% of the subjects. For the DEM error parameter, improvements were found in 100% of the subjects. Incorporation of the auditory feedback component revealed a trend toward enhanced performance. The findings were similar for both DEM parameters, as well as for incorporation of the auditory feedback, in both diagnostic groups. The results of the present study demonstrated considerable improvements in the DEM test scores following the oculomotor-based training, thus reflecting more time-optimal and accurate saccadic tracking after the training. The DEM test should be considered as another clinical test of global saccadic tracking performance in the ABI population. Copyright © 2017 Spanish General Council of Optometry. All rights reserved.

  3. Micromechanics of non-active clays in saturated state and DEM modelling

    Directory of Open Access Journals (Sweden)

    Pagano Arianna Gea

    2017-01-01

    Full Text Available The paper presents a conceptual micromechanical model for 1-D compression behaviour of non-active clays in saturated state. An experimental investigation was carried out on kaolin clay samples saturated with fluids of different pH and dielectric permittivity. The effect of pore fluid characteristics on one-dimensional compressibility behaviour of kaolin was investigated. A three dimensional Discrete Element Method (DEM was implemented in order to simulate the response of saturated kaolin observed during the experiments. A complex contact model was introduced, considering both the mechanical and physico-chemical microscopic interactions between clay particles. A simple analysis with spherical particles only was performed as a preliminary step in the DEM study in the elastic regime.

  4. Study of the electrooxidation of ethanol on hydrophobic electrodes by DEMS and HPLC

    International Nuclear Information System (INIS)

    Gonzalez Pereira, M.; Davila Jimenez, M.; Elizalde, M.P.; Manzo-Robledo, A.; Alonso-Vante, N.

    2004-01-01

    The electrochemical oxidation of ethanol in alkaline solution has been studied on Cu-PVC electrode and Ni/Cu-PVC composite electrodes modified by ruthenium nanoparticles. The techniques used were cyclic voltammetry (CV), steady-state potentiostatic method, on line differential electrochemical mass spectrometry (DEMS), and high-performance liquid chromatography (HPLC). The chemical products: acetaldehyde and acetic acid were detected measuring the proper mass charge (m/z) ratios. These products were also confirmed by HPLC. The surface modification of composite electrodes by ruthenium nanoparticles promotes the formation of acetaldehyde. As shown by DEMS, the surface modification shifts the onset potential for oxygen evolution reaction on the Cu-PVC composite electrode towards more anodic values

  5. Radiosurgery with the gamma knife; Radiochirurgie mit dem Gamma-Knife

    Energy Technology Data Exchange (ETDEWEB)

    Wowra, B.; Reulen, H.J.

    1996-05-10

    Radiosurgery is a novel modality introduced by the neurosurgeon Lars Leksell. For the most important lesions, (arteriovenous angiomas, benign tumors in the base of the skull, formation of metastases in the brain), radiosurgery is a valuable additional tool in the range of therapies available to the benefit of patients. The gamma knife has been gaining a leading rank in the range of therapies applied in Germany. (orig.) [Deutsch] Radiochirurgie ist ein neues, von dem Neurochirurgen Lars Leksell konzipiertes Prinzip. Bei den wichtigsten Indikationen (arteriovenoese Angiome, gutartige Tumoren der Schaedelbasis, Hirnmetastasen etc.) bereichert und ergaenzt die Radiochirurgie das therapeutische Arsenal der Neurochirurgie zum Vorteil der Patienten betraechtlich. Dem Gamma-Knife kommt jetzt auch in Deutschland ein prominenter Platz unter den verschiedenen radiochirurgischen Verfahren zu. (orig.)

  6. Doppler Centroid Estimation for Airborne SAR Supported by POS and DEM

    Directory of Open Access Journals (Sweden)

    CHENG Chunquan

    2015-05-01

    Full Text Available It is difficult to estimate the Doppler frequency and modulating rate for airborne SAR by using traditional vector method due to instable flight and complex terrain. In this paper, it is qualitatively analyzed that the impacts of POS, DEM and their errors on airborne SAR Doppler parameters. Then an innovative vector method is presented based on the range-coplanarity equation to estimate the Doppler centroid taking the POS and DEM as auxiliary data. The effectiveness of the proposed method is validated and analyzed via the simulation experiments. The theoretical analysis and experimental results show that the method can be used to estimate the Doppler centroid with high accuracy even in the cases of high relief, instable flight, and large squint SAR.

  7. Effect of particle breakage on cyclic densification of ballast: A DEM approach

    International Nuclear Information System (INIS)

    Thakur, P K; Vinod, J S; Indraratna, B

    2010-01-01

    In this paper, an attempt has been made to investigate the effect of particle breakage on densification behaviour of ballast under cyclic loading using Discrete Element Method (DEM). Numerical simulations using PFC 2D have been carried out on an assembly of angular particles with and without incorporation of particle breakage. Two-dimensional projection of angular ballast particles were simulated using clusters of bonded circular particles. Degradation of the bonds within a cluster was considered to represent particle breakage. Clump logic was used to make the cluster of particles unbreakable. DEM simulation results highlight that the particle breakage has a profound influence on the cyclic densification behaviour of ballast. The deformation behaviour exhibited by the assembly with breakage is in good agreement with the laboratory experiments. In addition, the evolution of particle displacement vectors clearly explains the breakage mechanism and associated deformations during cyclic loading.

  8. Numerical modelling of powder caking at REV scale by using DEM

    Science.gov (United States)

    Guessasma, Mohamed; Silva Tavares, Homayra; Afrassiabian, Zahra; Saleh, Khashayar

    2017-06-01

    This work deals with numerical simulation of powder caking process caused by capillary condensation phenomenon. Caking consists in unwanted agglomeration of powder particles. This process is often irreversible and not easy to predict. To reproduce mechanism involved by caking phenomenon we have used the Discrete Elements Method (DEM). In the present work, we mainly focus on the role of capillary condensation and subsequent liquid bridge formation within a granular medium exposed to fluctuations of ambient relative humidity. Such bridges cause an attractive force between particles, leading to the formation of a cake with intrinsic physicochemical and mechanical properties. By considering a Representative Elementary Volume (REV), the DEM is then performed by means of a MULTICOR-3D software tacking into account the properties of the cake (degree of saturation) in order to establish relationships between the microscopic parameters and the macroscopic behaviour (tensile strength).

  9. Numerical modelling of powder caking at REV scale by using DEM

    Directory of Open Access Journals (Sweden)

    Guessasma Mohamed

    2017-01-01

    Full Text Available This work deals with numerical simulation of powder caking process caused by capillary condensation phenomenon. Caking consists in unwanted agglomeration of powder particles. This process is often irreversible and not easy to predict. To reproduce mechanism involved by caking phenomenon we have used the Discrete Elements Method (DEM. In the present work, we mainly focus on the role of capillary condensation and subsequent liquid bridge formation within a granular medium exposed to fluctuations of ambient relative humidity. Such bridges cause an attractive force between particles, leading to the formation of a cake with intrinsic physicochemical and mechanical properties. By considering a Representative Elementary Volume (REV, the DEM is then performed by means of a MULTICOR-3D software tacking into account the properties of the cake (degree of saturation in order to establish relationships between the microscopic parameters and the macroscopic behaviour (tensile strength.

  10. Study of the electrooxidation of ethanol on hydrophobic electrodes by DEMS and HPLC

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez Pereira, M.; Davila Jimenez, M.; Elizalde, M.P.; Manzo-Robledo, A.; Alonso-Vante, N

    2004-09-15

    The electrochemical oxidation of ethanol in alkaline solution has been studied on Cu-PVC electrode and Ni/Cu-PVC composite electrodes modified by ruthenium nanoparticles. The techniques used were cyclic voltammetry (CV), steady-state potentiostatic method, on line differential electrochemical mass spectrometry (DEMS), and high-performance liquid chromatography (HPLC). The chemical products: acetaldehyde and acetic acid were detected measuring the proper mass charge (m/z) ratios. These products were also confirmed by HPLC. The surface modification of composite electrodes by ruthenium nanoparticles promotes the formation of acetaldehyde. As shown by DEMS, the surface modification shifts the onset potential for oxygen evolution reaction on the Cu-PVC composite electrode towards more anodic values.

  11. Production of 17-O-demethyl-geldanamycin, a cytotoxic ansamycin polyketide, by Streptomyces hygroscopicus DEM20745.

    Science.gov (United States)

    Baksh, Aron; Kepplinger, Bernhard; Isah, Hadiza A; Probert, Michael R; Clegg, William; Wills, Corinne; Goodfellow, Michael; Errington, Jeff; Allenby, Nick; Hall, Michael J

    2017-08-01

    The actinomycete DEM20745, collected from non-rhizosphere soil adjacent to Paraserianthes falactaria trees (Cangkringan, Indonesia), is an efficient producer of the anticancer ansamycin polyketide 17-O-demethyl-geldanamycin (17-O-DMG), a biosynthetic precursor of the Hsp90 inhibitor geldanamycin (GDM). In DEM20745, 17-O-DMG is the major ansamycin product observed reaching a maximum titre of 17 mg/L in the fermentation broth. 17-O-DMG has the potential to be a key starting material for the semi-synthesis of GDM analogues for use in anticancer therapy. Thus, this preferential biosynthesis of 17-O-DMG facilitates easy access to this important molecule and provides further insight in the biosynthesis of the geldanamycins.

  12. All you need is shape: Predicting shear banding in sand with LS-DEM

    Science.gov (United States)

    Kawamoto, Reid; Andò, Edward; Viggiani, Gioacchino; Andrade, José E.

    2018-02-01

    This paper presents discrete element method (DEM) simulations with experimental comparisons at multiple length scales-underscoring the crucial role of particle shape. The simulations build on technological advances in the DEM furnished by level sets (LS-DEM), which enable the mathematical representation of the surface of arbitrarily-shaped particles such as grains of sand. We show that this ability to model shape enables unprecedented capture of the mechanics of granular materials across scales ranging from macroscopic behavior to local behavior to particle behavior. Specifically, the model is able to predict the onset and evolution of shear banding in sands, replicating the most advanced high-fidelity experiments in triaxial compression equipped with sequential X-ray tomography imaging. We present comparisons of the model and experiment at an unprecedented level of quantitative agreement-building a one-to-one model where every particle in the more than 53,000-particle array has its own avatar or numerical twin. Furthermore, the boundary conditions of the experiment are faithfully captured by modeling the membrane effect as well as the platen displacement and tilting. The results show a computational tool that can give insight into the physics and mechanics of granular materials undergoing shear deformation and failure, with computational times comparable to those of the experiment. One quantitative measure that is extracted from the LS-DEM simulations that is currently not available experimentally is the evolution of three dimensional force chains inside and outside of the shear band. We show that the rotations on the force chains are correlated to the rotations in stress principal directions.

  13. Thieves, Parent Abusers, Draft Dodgers... and Homicides?:The authenticity of Dem. 24.105

    OpenAIRE

    Canevaro, Mirko

    2013-01-01

    This article discusses the authenticity of the document preserved at Dem. 24.105. This purportedly reports two laws, one about theft and the other about parent abusers, draft dodgers and homicides. Scholars have often believed it to provide reliable information about the procedures of dike klopes, apagoge phonou and apagoge against atimoi. This analysis shows that the document is inconsistent with other, reliable, information about the same topics and its language does not conform to that of ...

  14. CFD-DEM Onset of Motion Analysis for Application to Bed Scour Risk Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Sitek, M. A. [Argonne National Lab. (ANL), Argonne, IL (United States); Lottes, S. A. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2017-03-01

    This CFD study with DEM was done as a part of the Federal Highway Administration’s (FHWA’s) effort to improve scour design procedures. The Computational Fluid Dynamics-Discrete Element Method (CFD-DEM) model, available in CD-Adapco’s StarCCM+ software, was used to simulate multiphase systems, mainly those which combine fluids and solids. In this method the motion of discrete solids is accounted for by DEM, which applies Newton's laws of motion to every particle. The flow of the fluid is determined by the local averaged Navier–Stokes equations that can be solved using the traditional CFD approach. The interactions between the fluid phase and solids phase are modeled by use of Newton's third law. The inter-particle contact forces are included in the equations of motion. Soft-particle formulation is used, which allows particles to overlap. In this study DEM was used to model separate sediment grains and spherical particles laying on the bed with the aim to analyze their movement due to flow conditions. Critical shear stress causing the incipient movement of the sediment was established and compared to the available experimental data. An example of scour around a cylindrical pier is considered. Various depths of the scoured bed and flow conditions were taken into account to gain a better understanding of the erosion forces existing around bridge foundations. The decay of these forces with increasing scour depth was quantified with a ‘decay function’, which shows that particles become increasingly less likely to be set in motion by flow forces as a scour hole increases in depth. Computational and experimental examples of the scoured bed around a cylindrical pier are presented.

  15. Deep Convolutional Generative Adversarial Network for Procedural 3D Landscape Generation Based on DEM

    OpenAIRE

    Wulff-Jensen, Andreas; Rant, Niclas Nerup; Møller, Tobias Nordvig; Billeskov, Jonas Aksel

    2018-01-01

    This paper proposes a novel framework for improving procedural generation of 3D landscapes using machine learning. We utilized a Deep Convolutional Generative Adversarial Network (DC-GAN) to generate heightmaps. The network was trained on a dataset consisting of Digital Elevation Maps (DEM) of the alps. During map generation, the batch size and learning rate were optimized for the most efficient and satisfying map production. The diversity of the final output was tested against Perlin noise u...

  16. Present DDT and lindane indoor concentrations after extensive use of wood preservatives in attics in the past; Aktuelle DDT- und Lindan-Konzentrationen in Wohnraeumen nach intensivem Holzschutzmitteleinsatz auf Dachboeden in der Vergangenheit

    Energy Technology Data Exchange (ETDEWEB)

    Rosskamp, E.; Horn, W.; Ullrich, D.; Seifert, B. [Umweltbundesamt, Berlin (Germany). Inst. fuer Wasser-, Boden- und Lufthygiene

    1999-12-01

    ausgebauten Dachwohnungen zu bestimmen. Die untersuchten behandelten Dachboeden wiesen - z.T. auch ueber 20 Jahre nach Anwendung des Schutzmittels - DDT- und Lindan-Luftkonzentrationen bis zu 4600 ng/m{sup 3} bzw. 930 ng/m{sup 3} auf. In den ausgebauten Dachwohnungen und in den Wohnungen direkt unter den behandelten Dachboeden waren die Konzentrationen an DDT und Lindan jedoch wesentlich niedriger. Die Medianwerte lagen fuer DDT bei 20 bzw. 40 ng/m{sup 3} und fuer Lindan bei 5 bzw. 20 ng/m{sup 3}. Lediglich in einigen Wohnungen betrug die DDT- oder Lindan-Konzentration in der Luft mehr als 100 ng/m{sup 3}. In diesen Faellen war auch eine direkte Biozidanwendung in den Raeumen vorgenommen worden oder es bestand direkter Luftaustausch mit einem DDT-belasteten Dachraum. Eine Exposition der Wohnungsnutzer gegenueber DDT und Lindan kann sowohl ueber die Innenraumluft als auch - insbesondere fuer Kleinkinder mit ihrem spezifischen Spielverhalten - ueber den Hausstaub erfolgen. In Wohnraeumen wurden maximal 200 mg DDT/kg Staub nachgewiesen, der Median lag mit 20 mg/kg eine Groessenordnung niedriger. Die Lindan-Staubgehalte lagen alle unter 9 mg/kg. Die fuer Kleinkinder moegliche Exposition gegenueber DDT oder Lindan im Hausstaub liegt weiter unter den aus dem ADI-Wert der WHO abgeleiteten zulaessigen Aufnahmemengen. (orig.)

  17. Radiological risk assessment of isotope laboratories according to the requirements of the radiation protection ordinance and the protective labour legislation; Beurteilung des radiologischen Risikos von Isotopenlaboratorien nach den Vorgaben der Strahlenschutzverordnung und den Richtlinien fuer Arbeitssicherheit

    Energy Technology Data Exchange (ETDEWEB)

    Stuerm, R.P. [SafPro AG, Ausbildung und Beratung in Strahlenschutz, Basel (Switzerland); Kuster, M. [Novartis International AG, Corporate Health, Safety and Environment, Basel (Switzerland); Traub, K. [Novartis Pharma AG, Zentralstelle fuer Strahlenschutz, Basel (Switzerland)

    2001-07-01

    . 94). Isotopenlaboratorien der chemischen Industrie werden von der Schweizerischen Unfallversicherungsanstalt SUVA beaufsichtigt. Die SUVA nimmt nebst den Strahlenschutzaufgaben in den industriellen Betrieben auch die allgemeine Arbeitssicherheit wahr und hat Richtlinien zum Erstellen von Risikoanalysen erarbeitet. Bei diesen konventionellen Analysen werden die Arbeitsprozesse nach ihrem moeglichen Schadensausmass (Tod, schwere bleibende Gesundheitsschaden; leichter bleibender Gesundheitsschaden; heilbare Verletzung mit Arbeitsausfall; heilbare Verletzung ohne Arbeitsausfall) und der Eintretenswahrscheinlichkeit (haeufig; gelegentlich; selten; unwahrscheinlich; praktisch unmoeglich) in einer Risikomatrix beurteilt (grosse, mittlere und kleine Risiken). Die SUVA hat von zwei Baslern Isotopenlaboratorien des Typs B Risikobeurteilungen eingefordert, die einerseits die Gefaehrdung der Mitarbeiter und andererseits der Stadtbevoelkerung analysieren und radiologisch bewerten sollen. Fuer die Beurteilung des Mitarbeiterrisikos schlug sie vor, eine etablierte Methode aus der Arbeitssicherheit oder der Versicherungsbranche anzuwenden. Zudem muesse die Risikomatrix der von der Firmenleitung vorgegebenen Sicherheitskultur entsprechen. Damit standen wir vor dem Problem, radiologische Risiken, die sich als Strahlendosen in mSv ausdruecken lassen, fuer nicht radiologisch geschulte Manager mit den Folgen konventioneller Arbeitsunfaelle (Tod, Invaliditaet und Arbeitsausfall) bzw. mit den Reaktionen von Bevoelkerung und Politikern auf chemische Stoerfaelle zu vergleichen. Im Vortrag wird die aus Diskussionen mit der Aufsichtsbehoerde, der Firmenleitung, den Laborleitern und Labormitarbeitern entstandene Risikomatrix vorgestellt. Die Autoren sind der Meinung, dass bis anhin ein solcher Vergleich zwischen radiologischen und konventionellen Risiken noch nie etabliert worden sei und stellen ihr Resultat zur Diskussion. (orig.)

  18. The α7-nACh nicotinic receptor and its role in memory and selected diseases of the central nervous system

    Directory of Open Access Journals (Sweden)

    Urszula Baranowska

    2017-07-01

    Full Text Available α7-nACh is one of the major nicotinic cholinergic receptor subtypes found in the brain. It is broadly expressed in the hippocampal and cortical neurons, the regions which play a key role in memory formation. Although α7-nACh receptors may serve as postsynaptic receptors mediating classical neurotransmission, they usually function as presynaptic modulators responsible for the release of other neurotransmitters, such as glutamate, γ-aminobutyric acid, dopamine, and norepinephrine. They can, therefore, affect a wide array of neurobiological functions. In recent years, research has found that a large number of agonists and positive allosteric modulators of α7-nAChR induce beneficial effects on learning and memory. Consistently, mice deficient in chrna7 (the gene encoding α7-nAChR protein, are characterized by memory deficits. In addition, decreased expression and function of α7-nAChR is associated agoniwith many neurological diseases including schizophrenia, bipolar disorder, learning disability, attention deficit hyperactivity disorder, Alzheimer disease, autism, and epilepsy. In the recent years many animal experiments and clinical trials using α7-nAChR ligands were conducted. The results of these studies strongly indicate that agonists and positive allosteric modulators of α7-nAChR are promising therapeutic agents for diseases associated with cognitive deficits.

  19. Combined SDO/AIA, Hinode/XRT and FOXSI-2 microflare observations - DEM analysis and energetics

    Science.gov (United States)

    Panchapakesan, S. A.; Glesener, L.; Vievering, J. T.; Ryan, D.; Christe, S.; Inglis, A. R.; Buitrago-Casas, J. C.; Musset, S.; Krucker, S.

    2017-12-01

    The Focusing Optics X-ray Solar Imager (FOXSI) sounding rocket makes directimaging and spectral observation of the Sun in hard X-rays (HXRs) using highlysensitive focusing HXR optics. The second flight of FOXSI was launchedsuccessfully on 11 December 2014 and observed significant HXR emissions duringmicroflares. Some of these flares showed heating up to severalmillion Kelvin and were visible in the Extreme Ultraviolet (EUV) with the AtmosphericImaging Assembly (SDO/AIA). Spectral observations from FOXSI suggest emission upto 10-12 MK. We utilize SDO/AIA EUV, Hinode/XRT soft X-ray, and FOXSI-2 highenergy X-ray observations to derive the differential emission measure (DEM) ofthe microflares. The AIA and XRT observations provide broad temperaturecoverage but are poorly constrained at the hotter end. We therefore use FOXSI-2to better determine the high temperature component, thus producing a moreconstrained DEM than is possible with typically available observations. We usethis more highly constrained DEM to investigate the energetics of the observedmicroflares.

  20. Dissipation consistent fabric tensor definition from DEM to continuum for granular media

    Science.gov (United States)

    Li, X. S.; Dafalias, Y. F.

    2015-05-01

    In elastoplastic soil models aimed at capturing the impact of fabric anisotropy, a necessary ingredient is a measure of anisotropic fabric in the form of an evolving tensor. While it is possible to formulate such a fabric tensor based on indirect phenomenological observations at the continuum level, it is more effective and insightful to have the tensor defined first based on direct particle level microstructural observations and subsequently deduce a corresponding continuum definition. A practical means able to provide such observations, at least in the context of fabric evolution mechanisms, is the discrete element method (DEM). Some DEM defined fabric tensors such as the one based on the statistics of interparticle contact normals have already gained widespread acceptance as a quantitative measure of fabric anisotropy among researchers of granular material behavior. On the other hand, a fabric tensor in continuum elastoplastic modeling has been treated as a tensor-valued internal variable whose evolution must be properly linked to physical dissipation. Accordingly, the adaptation of a DEM fabric tensor definition to a continuum constitutive modeling theory must be thermodynamically consistent in regards to dissipation mechanisms. The present paper addresses this issue in detail, brings up possible pitfalls if such consistency is violated and proposes remedies and guidelines for such adaptation within a recently developed Anisotropic Critical State Theory (ACST) for granular materials.

  1. Drainage network extraction from a high-resolution DEM using parallel programming in the .NET Framework

    Science.gov (United States)

    Du, Chao; Ye, Aizhong; Gan, Yanjun; You, Jinjun; Duan, Qinyun; Ma, Feng; Hou, Jingwen

    2017-12-01

    High-resolution Digital Elevation Models (DEMs) can be used to extract high-accuracy prerequisite drainage networks. A higher resolution represents a larger number of grids. With an increase in the number of grids, the flow direction determination will require substantial computer resources and computing time. Parallel computing is a feasible method with which to resolve this problem. In this paper, we proposed a parallel programming method within the .NET Framework with a C# Compiler in a Windows environment. The basin is divided into sub-basins, and subsequently the different sub-basins operate on multiple threads concurrently to calculate flow directions. The method was applied to calculate the flow direction of the Yellow River basin from 3 arc-second resolution SRTM DEM. Drainage networks were extracted and compared with HydroSHEDS river network to assess their accuracy. The results demonstrate that this method can calculate the flow direction from high-resolution DEMs efficiently and extract high-precision continuous drainage networks.

  2. Flow Dynamics of green sand in the DISAMATIC moulding process using Discrete element method (DEM)

    International Nuclear Information System (INIS)

    Hovad, E; Walther, J H; Thorborg, J; Hattel, J H; Larsen, P

    2015-01-01

    The DISAMATIC casting process production of sand moulds is simulated with DEM (discrete element method). The main purpose is to simulate the dynamics of the flow of green sand, during the production of the sand mould with DEM. The sand shot is simulated, which is the first stage of the DISAMATIC casting process. Depending on the actual casting geometry the mould can be geometrically quite complex involving e.g. shadowing effects and this is directly reflected in the sand flow during the moulding process. In the present work a mould chamber with “ribs” at the walls is chosen as a baseline geometry to emulate some of these important conditions found in the real moulding process. The sand flow is simulated with the DEM and compared with corresponding video footages from the interior of the chamber during the moulding process. The effect of the rolling resistance and the static friction coefficient is analysed and discussed in relation to the experimental findings. (paper)

  3. Simulation of TanDEM-X interferograms for urban change detection

    Science.gov (United States)

    Welte, Amelie; Hammer, Horst; Thiele, Antje; Hinz, Stefan

    2017-10-01

    Damage detection after natural disasters is one of the remote sensing tasks in which Synthetic Aperture Radar (SAR) sensors play an important role. Since SAR is an active sensor, it can record images at all times of day and in all weather conditions, making it ideally suited for this task. While with the newer generation of SAR satellites such as TerraSAR-X or COSMOSkyMed amplitude change detection has become possible even for urban areas, interferometric phase change detection has not been published widely. This is mainly because of the long revisit times of common SAR sensors leading to temporal decorrelation. This situation has changed dramatically with the advent of the TanDEM-X constellation, which can create single-pass interferograms from space at very high resolutions, avoiding temporal decorrelation almost completely. In this paper the basic structures that are present for any building in InSAR phases, i.e. layover, shadow, and roof areas, are examined. Approaches for their extraction from TanDEM-X interferograms are developed using simulated SAR interferograms. The extracted features of the building signature will in the future be used for urban change detection in real TanDEM-X High Resolution Spotlight interferograms.

  4. A Review of Discrete Element Method (DEM) Particle Shapes and Size Distributions for Lunar Soil

    Science.gov (United States)

    Lane, John E.; Metzger, Philip T.; Wilkinson, R. Allen

    2010-01-01

    As part of ongoing efforts to develop models of lunar soil mechanics, this report reviews two topics that are important to discrete element method (DEM) modeling the behavior of soils (such as lunar soils): (1) methods of modeling particle shapes and (2) analytical representations of particle size distribution. The choice of particle shape complexity is driven primarily by opposing tradeoffs with total number of particles, computer memory, and total simulation computer processing time. The choice is also dependent on available DEM software capabilities. For example, PFC2D/PFC3D and EDEM support clustering of spheres; MIMES incorporates superquadric particle shapes; and BLOKS3D provides polyhedra shapes. Most commercial and custom DEM software supports some type of complex particle shape beyond the standard sphere. Convex polyhedra, clusters of spheres and single parametric particle shapes such as the ellipsoid, polyellipsoid, and superquadric, are all motivated by the desire to introduce asymmetry into the particle shape, as well as edges and corners, in order to better simulate actual granular particle shapes and behavior. An empirical particle size distribution (PSD) formula is shown to fit desert sand data from Bagnold. Particle size data of JSC-1a obtained from a fine particle analyzer at the NASA Kennedy Space Center is also fitted to a similar empirical PSD function.

  5. Bank gully extraction from DEMs utilizing the geomorphologic features of a loess hilly area in China

    Science.gov (United States)

    Yang, Xin; Na, Jiaming; Tang, Guoan; Wang, Tingting; Zhu, Axing

    2018-04-01

    As one of most active gully types in the Chinese Loess Plateau, bank gullies generally indicate soil loss and land degradation. This study addressed the lack of detailed, large scale monitoring of bank gullies and proposed a semi-automatic method for extracting bank gullies, given typical topographic features based on 5 m resolution DEMs. First, channel networks, including bank gullies, are extracted through an iterative channel burn-in algorithm. Second, gully heads are correctly positioned based on the spatial relationship between gully heads and their corresponding gully shoulder lines. Third, bank gullies are distinguished from other gullies using the newly proposed topographic measurement of "relative gully depth (RGD)." The experimental results from the loess hilly area of the Linjiajian watershed in the Chinese Loess Plateau show that the producer accuracy reaches 87.5%. The accuracy is affected by the DEM resolution and RGD parameters, as well as the accuracy of the gully shoulder line. The application in the Madigou watershed with a high DEM resolution validated the duplicability of this method in other areas. The overall performance shows that bank gullies can be extracted with acceptable accuracy over a large area, which provides essential information for research on soil erosion, geomorphology, and environmental ecology.

  6. Pre-2014 mudslides at Oso revealed by InSAR and multi-source DEM analysis

    Science.gov (United States)

    Kim, J. W.; Lu, Z.; QU, F.

    2014-12-01

    The landslide is a process that results in the downward and outward movement of slope-reshaping materials including rocks and soils and annually causes the loss of approximately $3.5 billion and tens of casualties in the United States. The 2014 Oso mudslide was an extreme event costing nearly 40 deaths and damaging civilian properties. Landslides are often unpredictable, but in many cases, catastrophic events are repetitive. Historic record in the Oso mudslide site indicates that there have been serial events in decades, though the extent of sliding events varied from time to time. In our study, the combination of multi-source DEMs, InSAR, and time-series InSAR analysis has enabled to characterize the Oso mudslide. InSAR results from ALOS PALSAR show that there was no significant deformation between mid-2006 and 2011. The combination of time-series InSAR analysis and old-dated DEM indicated revealed topographic changes associated the 2006 sliding event, which is confirmed by the difference of multiple LiDAR DEMs. Precipitation and discharge measurements before the 2006 and 2014 landslide events did not exhibit extremely anomalous records, suggesting the precipitation is not the controlling factor in determining the sliding events at Oso. The lack of surface deformation during 2006-2011 and weak correlation between the precipitation and the sliding event, suggest other factors (such as porosity) might play a critical role on the run-away events at this Oso and other similar landslides.

  7. Calibration of DEM parameters on shear test experiments using Kriging method

    Science.gov (United States)

    Xavier, Bednarek; Sylvain, Martin; Abibatou, Ndiaye; Véronique, Peres; Olivier, Bonnefoy

    2017-06-01

    Calibration of powder mixing simulation using Discrete-Element-Method is still an issue. Achieving good agreement with experimental results is difficult because time-efficient use of DEM involves strong assumptions. This work presents a methodology to calibrate DEM parameters using Efficient Global Optimization (EGO) algorithm based on Kriging interpolation method. Classical shear test experiments are used as calibration experiments. The calibration is made on two parameters - Young modulus and friction coefficient. The determination of the minimal number of grains that has to be used is a critical step. Simulations of a too small amount of grains would indeed not represent the realistic behavior of powder when using huge amout of grains will be strongly time consuming. The optimization goal is the minimization of the objective function which is the distance between simulated and measured behaviors. The EGO algorithm uses the maximization of the Expected Improvement criterion to find next point that has to be simulated. This stochastic criterion handles with the two interpolations made by the Kriging method : prediction of the objective function and estimation of the error made. It is thus able to quantify the improvement in the minimization that new simulations at specified DEM parameters would lead to.

  8. Investigation of the fluidized bed-chemical vapor deposition (FBCVD) process using CFD-DEM method

    International Nuclear Information System (INIS)

    Liu Malin; Liu Rongzheng; Wen Yuanyun; Liu Bing; Shao Youlin

    2014-01-01

    The CFD-DEM-CVD multiscale coupling simulation concept was proposed based on the mass/momentum/energy transfer involved in the FB-CVD process. The pyrolysis process of the reaction gas in the spouted bed can be simulated by CFD method, then the concentration field and velocity field can be extracted and coupled with the particle movement behavior which can be simulated by DEM. Particle deposition process can be described by the CVD model based on particle position, velocity and neighboring gas concentration. This multiscale coupling method can be implemented in the Fluent@-EDEM@ software with their UDF (User Definition Function) and API (Application Programming Interface). Base on the multiscale coupling concept, the criterion for evaluating FB-CVD process is given. At first, the volume in the coating furnace is divided into two parts (active coating area and non-active coating area) based on simulation results of chemical pyrolysis process. Then the residence time of all particles in the active coating area can be obtained using the CFD-DEM simulation method. The residence time distribution can be used as a criterion for evaluating the gas-solid contact efficiency and operation performance of the coating furnace. At last different coating parameters of the coating furnace are compared based on the proposed criterion. And also, the future research emphasis is discussed. (author)

  9. KAJIAN PEMANFAATAN DEM SRTM & GOOGLE EARTH UNTUK PARAMETER PENILAIAN POTENSI KERUGIAN EKONOMI AKIBAT BANJIR ROB

    Directory of Open Access Journals (Sweden)

    Arief L Nugraha

    2013-12-01

    Full Text Available Tidal flood is a significant threat for the economic growth rate in the city of Semarang. The threat mitigation requires planning, thereby reducing the impact of the losses. The availability of global data with free access can provide solutions in disaster management, the data are SRTM DEM and Google Earth. With both of these data can be mapped potential economic losses caused by tidal flooding. With the techniques of remote sensing and GIS to handle the SRTM DEM data and Google Earth, the techniques can be generated maps and models of tidal inundation area maps woke up in the city of Semarang. Analysis of potential economic losses can be calculated by doing an overlay of the two maps generated. The results achieved from this study is SRTM DEM and Google Earth can able to produce thematic maps of situational tidal flood disaster so that it can be used as a parameter value calculation of the potential economic losses. This study also obtain the result that the area of ​​land affected by the tidal flood an area of ​​8339.31 hectares and the number of buildings reaching 78 299 pieces, which the district that has the highest impact on the tidal flood that North Semarang.

  10. A Novel DEM Approach to Simulate Block Propagation on Forested Slopes

    Science.gov (United States)

    Toe, David; Bourrier, Franck; Dorren, Luuk; Berger, Frédéric

    2018-03-01

    In order to model rockfall on forested slopes, we developed a trajectory rockfall model based on the discrete element method (DEM). This model is able to take the complex mechanical processes at work during an impact into account (large deformations, complex contact conditions) and can explicitly simulate block/soil, block/tree contacts as well as contacts between neighbouring trees. In this paper, we describe the DEM model developed and we use it to assess the protective effect of different types of forest. In addition, we compared it with a more classical rockfall simulation model. The results highlight that forests can significantly reduce rockfall hazard and that the spatial structure of coppice forests has to be taken into account in rockfall simulations in order to avoid overestimating the protective role of these forest structures against rockfall hazard. In addition, the protective role of the forests is mainly influenced by the basal area. Finally, the advantages and limitations of the DEM model were compared with classical rockfall modelling approaches.

  11. DEM investigation of weathered rocks using a novel bond contact model

    Directory of Open Access Journals (Sweden)

    Zhenming Shi

    2015-06-01

    Full Text Available The distinct element method (DEM incorporated with a novel bond contact model was applied in this paper to shed light on the microscopic physical origin of macroscopic behaviors of weathered rock, and to achieve the changing laws of microscopic parameters from observed decaying properties of rocks during weathering. The changing laws of macroscopic mechanical properties of typical rocks were summarized based on the existing research achievements. Parametric simulations were then conducted to analyze the relationships between macroscopic and microscopic parameters, and to derive the changing laws of microscopic parameters for the DEM model. Equipped with the microscopic weathering laws, a series of DEM simulations of basic laboratory tests on weathered rock samples was performed in comparison with analytical solutions. The results reveal that the relationships between macroscopic and microscopic parameters of rocks against the weathering period can be successfully attained by parametric simulations. In addition, weathering has a significant impact on both stress–strain relationship and failure pattern of rocks.

  12. VT Data - Lidar Hydro-flattened DEM (0.7m) 2016, Essex, Caledonia, Orange, and Windsor Counties

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) This metadata applies to the following collection area(s): Middle CT River subbasin 2016 0.7m and Digital Elevation Model (DEM) dataset of the...

  13. Joint use of multi-orbit high-resolution SAR interferometry for DEM generation in mountainous area

    KAUST Repository

    Zhang, Lu; Jiang, Houjun; Liao, Mingsheng; Balz, Timo; Wang, Teng

    2014-01-01

    SAR interferometry has long been regarded as an effective tool for wide-area topographic mapping in hilly and mountainous areas. However, quality of InSAR DEM product is usually affected by atmospheric disturbances and decorrelation-induced voids, especially for data acquired in repeat-pass mode. In this paper, we proposed an approach for improved topographic mapping by optimal fusion of multi-orbit InSAR DEMs with correction of atmospheric phase screen (APS). An experimental study with highresolution TerraSAR-X and COSMO-SkyMed datasets covering a mountainous area was carried out to demonstrate the effectiveness of the proposed approach. Validation with a reference DEM of scale 1:50,000 indicated that vertical accuracy of the fused DEM can be better than 5 m.

  14. Joint use of multi-orbit high-resolution SAR interferometry for DEM generation in mountainous area

    KAUST Repository

    Zhang, Lu

    2014-07-01

    SAR interferometry has long been regarded as an effective tool for wide-area topographic mapping in hilly and mountainous areas. However, quality of InSAR DEM product is usually affected by atmospheric disturbances and decorrelation-induced voids, especially for data acquired in repeat-pass mode. In this paper, we proposed an approach for improved topographic mapping by optimal fusion of multi-orbit InSAR DEMs with correction of atmospheric phase screen (APS). An experimental study with highresolution TerraSAR-X and COSMO-SkyMed datasets covering a mountainous area was carried out to demonstrate the effectiveness of the proposed approach. Validation with a reference DEM of scale 1:50,000 indicated that vertical accuracy of the fused DEM can be better than 5 m.

  15. Julia Dombrowski: Die Suche nach der Liebe im Netz. Eine Ethnographie des Online-Datings. Bielefeld: transcript Verlag 2011.

    Directory of Open Access Journals (Sweden)

    Vanessa Kleinschnittger

    2011-09-01

    Full Text Available Julia Dombrowski setzt sich in ihrer Dissertation aus ethnologischer Perspektive mit dem Phänomen Online-Dating auseinander. Dabei legt sie einen Fokus auf die Emotionen, insbesondere die romantische Liebe, und widmet sich der Frage, auf welche Weise von den User/-innen der Datingbörsen kulturspezifische Liebesvorstellungen und individuelles Erleben bei ihrer Partnersuche vereinbart werden. Damit weicht Dombrowski von der bestehenden, sich vor allem auf Kapitalismuskritik konzentrierenden Forschung zum Online-Dating ab und sucht den Zugang zum Thema über das subjektive emotionale Erleben des Online-Datings durch die User/-innen selbst.In her dissertation, Julia Dombrowski discusses the phenomenon online-dating from an ethnological perspective. She focuses on emotions, particularly romantic love, and devotes her work to the question as to how users of dating sites reconcile culture specific ideas of love with individual experiences while dating. Thus Dombrowski departs from the existing studies on online dating, which concentrate mainly on the criticism of capitalism, and approaches the topic via the user’s subjective emotional perception of online dating.

  16. Extraction and Validation of Geomorphological Features from EU-DEM in The Vicinity of the Mygdonia Basin, Northern Greece

    Science.gov (United States)

    Mouratidis, Antonios; Karadimou, Georgia; Ampatzidis, Dimitrios

    2017-12-01

    The European Union Digital Elevation Model (EU-DEM) is a relatively new, hybrid elevation product, principally based on SRTM DEM and ASTER GDEM data, but also on publically available Russian topographic maps for regions north of 60° N. More specifically, EU-DEM is a Digital Surface Model (DSM) over Europe from the Global Monitoring for Environment and Security (GMES) Reference Data Access (RDA) project - a realisation of the Copernicus (former GMES) programme, managed by the European Commission/DG Enterprise and Industry. Even if EU-DEM is indeed more reliable in terms of elevation accuracy than its constituents, it ought to be noted that it is not representative of the original elevation measurements, but is rather a secondary (mathematical) product. Therefore, for specific applications, such as those of geomorphological interest, artefacts may be induced. To this end, the purpose of this paper is to investigate the performance of EU-DEM for geomorphological applications and compare it against other available datasets, i.e. topographic maps and (almost) global DEMs such as SRTM, ASTER-GDEM and WorldDEM™. This initial investigation is carried out in Central Macedonia, Northern Greece, in the vicinity of the Mygdonia basin, which corresponds to an area of particular interest for several geoscience applications. This area has also been serving as a test site for the systematic validation of DEMs for more than a decade. Consequently, extensive elevation datasets and experience have been accumulated over the years, rendering the evaluation of new elevation products a coherent and useful exercise on a local to regional scale. In this context, relief classification, drainage basin delineation, slope and slope aspect, as well as extraction and classification of drainage network are performed and validated among the aforementioned elevation sources. The achieved results focus on qualitative and quantitative aspects of automatic geomorphological feature extraction from

  17. Combined DEM Extration Method from StereoSAR and InSAR

    Science.gov (United States)

    Zhao, Z.; Zhang, J. X.; Duan, M. Y.; Huang, G. M.; Yang, S. C.

    2015-06-01

    A pair of SAR images acquired from different positions can be used to generate digital elevation model (DEM). Two techniques exploiting this characteristic have been introduced: stereo SAR and interferometric SAR. They permit to recover the third dimension (topography) and, at the same time, to identify the absolute position (geolocation) of pixels included in the imaged area, thus allowing the generation of DEMs. In this paper, StereoSAR and InSAR combined adjustment model are constructed, and unify DEM extraction from InSAR and StereoSAR into the same coordinate system, and then improve three dimensional positioning accuracy of the target. We assume that there are four images 1, 2, 3 and 4. One pair of SAR images 1,2 meet the required conditions for InSAR technology, while the other pair of SAR images 3,4 can form stereo image pairs. The phase model is based on InSAR rigorous imaging geometric model. The master image 1 and the slave image 2 will be used in InSAR processing, but the slave image 2 is only used in the course of establishment, and the pixels of the slave image 2 are relevant to the corresponding pixels of the master image 1 through image coregistration coefficient, and it calculates the corresponding phase. It doesn't require the slave image in the construction of the phase model. In Range-Doppler (RD) model, the range equation and Doppler equation are a function of target geolocation, while in the phase equation, the phase is also a function of target geolocation. We exploit combined adjustment model to deviation of target geolocation, thus the problem of target solution is changed to solve three unkonwns through seven equations. The model was tested for DEM extraction under spaceborne InSAR and StereoSAR data and compared with InSAR and StereoSAR methods respectively. The results showed that the model delivered a better performance on experimental imagery and can be used for DEM extraction applications.

  18. Digital Elevation Model (DEM), DEM data are useful for terrain analysis and modeling including slope and aspect calculations. They may be used to produced shaded relief maps and contour maps., Published in 2001, 1:24000 (1in=2000ft) scale, Louisiana State University (LSU).

    Data.gov (United States)

    NSGIC Education | GIS Inventory — Digital Elevation Model (DEM) dataset current as of 2001. DEM data are useful for terrain analysis and modeling including slope and aspect calculations. They may be...

  19. FE-DEM Analysis of the Effect of Tread Pattern on the Tractive Performance of Tires Operating on Sand

    Science.gov (United States)

    Nakashima, Hiroshi; Takatsu, Yuzuru; Shinone, Hisanori; Matsukawa, Hisao; Kasetani, Takahiro

    Soil-tire system interaction is a fundamental and important research topic in terramechanics. We applied a 2D finite element, discrete element method (FE-DEM), using FEM for the tire and the bottom soil layer and DEM for the surface soil layer. Satisfactory performance analysis was achieved. In this study, to clarify the capabilities and limitations of the method for soil-tire interaction analysis, the tractive performance of real automobile tires with two different tread patterns—smooth and grooved—was analyzed by FE-DEM, and the numerical results compared with the experimental results obtained using an indoor traction measurement system. The analysis of tractive performance could be performed with sufficient accuracy by the proposed 2D dynamic FE-DEM. FE-DEM obtained larger drawbar pull for a tire with a grooved tread pattern, which was verified by the experimental results. Moreover, the result for the grooved tire showed almost the same gross tractive effort and similar running resistance as in experiments. However, for a tire with smooth tread pattern, the analyzed gross tractive effort and running resistance behaved differently than the experimental results, largely due to the difference in tire sinkage in FE-DEM.

  20. EVALUATION OF AIRBORNE L- BAND MULTI-BASELINE POL-INSAR FOR DEM EXTRACTION BENEATH FOREST CANOPY

    Directory of Open Access Journals (Sweden)

    W. M. Li

    2018-04-01

    Full Text Available DEM beneath forest canopy is difficult to extract with optical stereo pairs, InSAR and Pol-InSAR techniques. Tomographic SAR (TomoSAR based on different penetration and view angles could reflect vertical structure and ground structure. This paper aims at evaluating the possibility of TomoSAR for underlying DEM extraction. Airborne L-band repeat-pass Pol-InSAR collected in BioSAR 2008 campaign was applied to reconstruct the 3D structure of forest. And sum of kronecker product and algebraic synthesis algorithm were used to extract ground structure, and phase linking algorithm was applied to estimate ground phase. Then Goldstein cut-branch approach was used to unwrap the phases and then estimated underlying DEM. The average difference between the extracted underlying DEM and Lidar DEM is about 3.39 m in our test site. And the result indicates that it is possible for underlying DEM estimation with airborne L-band repeat-pass TomoSAR technique.

  1. Evaluation of Airborne l- Band Multi-Baseline Pol-Insar for dem Extraction Beneath Forest Canopy

    Science.gov (United States)

    Li, W. M.; Chen, E. X.; Li, Z. Y.; Jiang, C.; Jia, Y.

    2018-04-01

    DEM beneath forest canopy is difficult to extract with optical stereo pairs, InSAR and Pol-InSAR techniques. Tomographic SAR (TomoSAR) based on different penetration and view angles could reflect vertical structure and ground structure. This paper aims at evaluating the possibility of TomoSAR for underlying DEM extraction. Airborne L-band repeat-pass Pol-InSAR collected in BioSAR 2008 campaign was applied to reconstruct the 3D structure of forest. And sum of kronecker product and algebraic synthesis algorithm were used to extract ground structure, and phase linking algorithm was applied to estimate ground phase. Then Goldstein cut-branch approach was used to unwrap the phases and then estimated underlying DEM. The average difference between the extracted underlying DEM and Lidar DEM is about 3.39 m in our test site. And the result indicates that it is possible for underlying DEM estimation with airborne L-band repeat-pass TomoSAR technique.

  2. On the COSMO-SkyMed Exploitation for Interferometric DEM Generation

    Science.gov (United States)

    Teresa, C. M.; Raffaele, N.; Oscar, N. D.; Fabio, B.

    2011-12-01

    DEM products for Earth observation space-borne applications are being to play a role of increasing importance due to the new generation of high resolution sensors (both optical and SAR). These new sensors demand elevation data for processing and, on the other hand, they provide new possibilities for DEM generation. Till now, for what concerns interferometric DEM, the Shuttle Radar Topography Mission (SRTM) has been the reference product for scientific applications all over the world. SRTM mission [1] had the challenging goal to meet the requirements for a homogeneous and reliable DEM fulfilling the DTED-2 specifications. However, new generation of high resolution sensors (including SAR) pose new requirements for elevation data in terms of vertical precision and spatial resolution. DEM are usually used as ancillary input in different processing steps as for instance geocoding and Differential SAR Interferometry. In this context, the recent SAR missions of DLR (TerraSAR-X and TanDEM-X) and ASI (COSMO-SkyMed) can play a promising role thanks to their high resolution both in space and time. In particular, the present work investigates the potentialities of the COSMO/SkyMed (CSK) constellation for ground elevation measurement with particular attention devoted to the impact of the improved spatial resolution wrt the previous SAR sensors. The recent scientific works, [2] and [3], have shown the advantages of using CSK in the monitoring of terrain deformations caused by landslides, earthquakes, etc. On the other hand, thanks to the high spatial resolution, CSK appears to be very promising in monitoring man-made structures, such as buildings, bridges, railways and highways, thus enabling new potential applications (urban applications, precise DEM, etc.). We present results obtained by processing both SPOTLIGHT and STRIPMAP acquisitions through standard SAR Interferometry as well as multi-pass interferometry [4] with the aim of measuring ground elevation. Acknowledgments

  3. Coastal Digital Elevation Models (DEMs) for tsunami hazard assessment on the French coasts

    Science.gov (United States)

    Maspataud, Aurélie; Biscara, Laurie; Hébert, Hélène; Schmitt, Thierry; Créach, Ronan

    2015-04-01

    Building precise and up-to-date coastal DEMs is a prerequisite for accurate modeling and forecasting of hydrodynamic processes at local scale. Marine flooding, originating from tsunamis, storm surges or waves, is one of them. Some high resolution DEMs are being generated for multiple coast configurations (gulf, embayment, strait, estuary, harbor approaches, low-lying areas…) along French Atlantic and Channel coasts. This work is undertaken within the framework of the TANDEM project (Tsunamis in the Atlantic and the English ChaNnel: Definition of the Effects through numerical Modeling) (2014-2017). DEMs boundaries were defined considering the vicinity of French civil nuclear facilities, site effects considerations and potential tsunamigenic sources. Those were identified from available historical observations. Seamless integrated topographic and bathymetric coastal DEMs will be used by institutions taking part in the study to simulate expected wave height at regional and local scale on the French coasts, for a set of defined scenarii. The main tasks were (1) the development of a new capacity of production of DEM, (2) aiming at the release of high resolution and precision digital field models referred to vertical reference frameworks, that require (3) horizontal and vertical datum conversions (all source elevation data need to be transformed to a common datum), on the basis of (4) the building of (national and/or local) conversion grids of datum relationships based on known measurements. Challenges in coastal DEMs development deal with good practices throughout model development that can help minimizing uncertainties. This is particularly true as scattered elevation data with variable density, from multiple sources (national hydrographic services, state and local government agencies, research organizations and private engineering companies) and from many different types (paper fieldsheets to be digitized, single beam echo sounder, multibeam sonar, airborne laser

  4. Landform classification using a sub-pixel spatial attraction model to increase spatial resolution of digital elevation model (DEM

    Directory of Open Access Journals (Sweden)

    Marzieh Mokarrama

    2018-04-01

    Full Text Available The purpose of the present study is preparing a landform classification by using digital elevation model (DEM which has a high spatial resolution. To reach the mentioned aim, a sub-pixel spatial attraction model was used as a novel method for preparing DEM with a high spatial resolution in the north of Darab, Fars province, Iran. The sub-pixel attraction models convert the pixel into sub-pixels based on the neighboring pixels fraction values, which can only be attracted by a central pixel. Based on this approach, a mere maximum of eight neighboring pixels can be selected for calculating of the attraction value. In the mentioned model, other pixels are supposed to be far from the central pixel to receive any attraction. In the present study by using a sub-pixel attraction model, the spatial resolution of a DEM was increased. The design of the algorithm is accomplished by using a DEM with a spatial resolution of 30 m (the Advanced Space borne Thermal Emission and Reflection Radiometer; (ASTER and a 90 m (the Shuttle Radar Topography Mission; (SRTM. In the attraction model, scale factors of (S = 2, S = 3, and S = 4 with two neighboring methods of touching (T = 1 and quadrant (T = 2 are applied to the DEMs by using MATLAB software. The algorithm is evaluated by taking the best advantages of 487 sample points, which are measured by surveyors. The spatial attraction model with scale factor of (S = 2 gives better results compared to those scale factors which are greater than 2. Besides, the touching neighborhood method is turned to be more accurate than the quadrant method. In fact, dividing each pixel into more than two sub-pixels decreases the accuracy of the resulted DEM. On the other hand, in these cases DEM, is itself in charge of increasing the value of root-mean-square error (RMSE and shows that attraction models could not be used for S which is greater than 2. Thus considering results, the proposed model is highly capable of

  5. A new 100-m Digital Elevation Model of the Antarctic Peninsula derived from ASTER Global DEM: methods and accuracy assessment

    Directory of Open Access Journals (Sweden)

    A. J. Cook

    2012-10-01

    Full Text Available A high resolution surface topography Digital Elevation Model (DEM is required to underpin studies of the complex glacier system on the Antarctic Peninsula. A complete DEM with better than 200 m pixel size and high positional and vertical accuracy would enable mapping of all significant glacial basins and provide a dataset for glacier morphology analyses. No currently available DEM meets these specifications. We present a new 100-m DEM of the Antarctic Peninsula (63–70° S, based on ASTER Global Digital Elevation Model (GDEM data. The raw GDEM products are of high-quality on the rugged terrain and coastal-regions of the Antarctic Peninsula and have good geospatial accuracy, but they also contain large errors on ice-covered terrain and we seek to minimise these artefacts. Conventional data correction techniques do not work so we have developed a method that significantly improves the dataset, smoothing the erroneous regions and hence creating a DEM with a pixel size of 100 m that will be suitable for many glaciological applications. We evaluate the new DEM using ICESat-derived elevations, and perform horizontal and vertical accuracy assessments based on GPS positions, SPOT-5 DEMs and the Landsat Image Mosaic of Antarctica (LIMA imagery. The new DEM has a mean elevation difference of −4 m (± 25 m RMSE from ICESat (compared to −13 m mean and ±97 m RMSE for the original ASTER GDEM, and a horizontal error of less than 2 pixels, although elevation accuracies are lower on mountain peaks and steep-sided slopes. The correction method significantly reduces errors on low relief slopes and therefore the DEM can be regarded as suitable for topographical studies such as measuring the geometry and ice flow properties of glaciers on the Antarctic Peninsula. The DEM is available for download from the NSIDC website: http://nsidc.org/data/nsidc-0516.html (Functional MRI of the pelvic floor: postpartum changes of primiparous women after spontaneous vaginal delivery; Funktionelle Magnetresonanztomographie (MRT) des Beckenbodens: Postpartale Veraenderungen bei Erstgebaerenden nach vaginaler Spontangeburt

    Energy Technology Data Exchange (ETDEWEB)

    Lienemann, A.; Fischer, T.; Reiser, M. [Inst. fuer Klinische Radiologie, Klinikum der Univ. Muenchen (Germany); Anthuber, C. [Klinik und Poliklinik fuer Geburtshilfe und Frauenheilkunde, Klinikum der Univ. Muenchen/Grosshadern (Germany)

    2003-08-01

    Purpose: Detection of morphological and functional changes of the pelvic floor with functional MRI in primiparous women after spontaneous vaginal delivery. Methods and Materials: The study comprises 26 primiparous women after vaginal delivery and a control group of 41 healthy asymptomatic nulliparous volunteers. MRI was performed on a 1.5 T system in supine position with vagina and rectum opacified with Sonogel. The static images consisted of sagittal and axial T{sub 2}-weighted SE sequences and functional images of true FISP sequences in midsagittal and axial planes acquired with the patient at rest, straining and during defecation. Evaluation of morphometric parameters included pelvimetry, thickness of the puborectal muscle and width of the urogenital hiatus as well as position and movement of the pelvic organs relative to the pubococcygeal reference line. Results: The configuration of the bony pelvis did not differ for both groups. The puborectal muscle was significantly thinner in the study group (0.8 cm vs 0.6 cm). The functional images showed no significant differences between both groups at rest but a significantly increased incidence in the descent of the bladder neck, vaginal fornix and anorectal junction in the study group during straining. In addition, the primiparous women had more prominent rectoceles (0.6 cm vs 1.5 cm). Conclusion: Static imaging alone fails to demonstrate relevant pelvic floor changes and a functional method is necessary to evaluate the interactions of the pelvic organs regarding organ descent. Functional MRI of the pelvic floor is an excellent method to reveal the significant changes of the pelvic floor after vaginal birth without exposing the uterus to radiation. (orig.) [German] Ziel: Darstellung von morphologischen und funktionellen Veraenderungen am Beckenboden bei Erstgebaerenden nach spontanvaginaler Entbindung mittels funktioneller MRT. Methodik: Funktionelle MRT des Beckenbodens von 26 Erstgebaerenden nach vaginaler

  6. Computed tomography of the patellofemoral alignment after arthroscopic reconstruction following patella dislocation; Postoperative Bestimmung des patellofemoralen Alignements nach Patellaluxation - eine computertomographische Analyse

    Energy Technology Data Exchange (ETDEWEB)

    Schroeder, R.J.; Hidajat, N.; Maeurer, J.; Felix, R. [Klinik fuer Strahlenheilkunde, Charite, Campus Virchow-Klinikum, Humboldt-Univ. Berlin (Germany); Weiler, A.; Hoeher, J. [Sektion Sporttraumatologie und Arthroskopie, Klinik fuer Unfall- und Wiederherstellungschirurgie, Charite, Campus Virchow-Klinikum, Humboldt-Univ. Berlin (Germany)

    2003-04-01

    Purpose: To evaluate the diagnostic impact of different CT-based measurements to analyze the patellofemoral alignment after arthroscopic reconstruction in patients with patella dislocation. Materials and Methods: In 18 patients with dislocation of the patella, CT of the patellofemoral joint was performed after arthroscopic reconstruction. Various methods recommended in the literature were used to analyze the structure and the alignment of the patellofemoral joint with a relaxed quadriceps muscle. Axial CT scans were taken in four different knee flexion angles (15 , 30 , 45 , 60 ). Results: After arthroscopic stabilization in patients with patella dislocation, only the lateral patellofemoral angle (15 and 30 knee flexion) and the congruence angle (15 knee flexion) showed significant differences between the CT-measurements in the normal and the operated group. The differences of the remaining mean values were not significant due to a high standard deviation. With increasing flexion of the knee, the differences between the normal and the dislocation group almost disappeared. Only the lateral patellofemoral angle, the patella tilt and the lateral patella shift revealed differences between the normal and the group with recurrent dislocation in every degree of knee flexion. With increasing knee flexion above 30 and especially at 60 , the majority of the measured values returned to the normal range. Conclusions: For CT-measurements of the patellofemoral joint after arthroscopic stabilization, the patellofemoral angle and the congruence angle seemed to be most useful. The measurements of the patellofemoral joint should be taken in various degrees of knee flexion. (orig.) [German] Ziel: Evaluation der Aussagekraft verschiedener CT-Vermessungsmethoden des Patellofemoralgelenkes nach arthroskopischer Stabilisierung bei Patellaluxation. Material und Methode: Axiale CT-Vermessung des Patellofemoralgelenkes bei 18 Patienten nach arthroskopischer medialer patellofemoraler Naht

  7. ANALYSIS AND VALIDATION OF GRID DEM GENERATION BASED ON GAUSSIAN MARKOV RANDOM FIELD

    Directory of Open Access Journals (Sweden)

    F. J. Aguilar

    2016-06-01

    Full Text Available Digital Elevation Models (DEMs are considered as one of the most relevant geospatial data to carry out land-cover and land-use classification. This work deals with the application of a mathematical framework based on a Gaussian Markov Random Field (GMRF to interpolate grid DEMs from scattered elevation data. The performance of the GMRF interpolation model was tested on a set of LiDAR data (0.87 points/m2 provided by the Spanish Government (PNOA Programme over a complex working area mainly covered by greenhouses in Almería, Spain. The original LiDAR data was decimated by randomly removing different fractions of the original points (from 10% to up to 99% of points removed. In every case, the remaining points (scattered observed points were used to obtain a 1 m grid spacing GMRF-interpolated Digital Surface Model (DSM whose accuracy was assessed by means of the set of previously extracted checkpoints. The GMRF accuracy results were compared with those provided by the widely known Triangulation with Linear Interpolation (TLI. Finally, the GMRF method was applied to a real-world case consisting of filling the LiDAR-derived DSM gaps after manually filtering out non-ground points to obtain a Digital Terrain Model (DTM. Regarding accuracy, both GMRF and TLI produced visually pleasing and similar results in terms of vertical accuracy. As an added bonus, the GMRF mathematical framework makes possible to both retrieve the estimated uncertainty for every interpolated elevation point (the DEM uncertainty and include break lines or terrain discontinuities between adjacent cells to produce higher quality DTMs.

  8. DEVELOPMENT AND EVALUATION OF SIMPLE MEASUREMENT SYSTEM USING THE OBLIQUE PHOTO AND DEM

    Directory of Open Access Journals (Sweden)

    H. Nonaka

    2016-06-01

    Full Text Available When a disaster occurs, we must grasp and evaluate its damage as soon as possible. Then we try to estimate them from some kind of photographs, such as surveillance camera imagery, satellite imagery, photographs taken from a helicopter and so on. Especially in initial stage, estimation of decent damage situation for a short time is more important than investigation of damage situation for a long time. One of the source of damage situation is the image taken by surveillance camera, satellite sensor and helicopter. If we can measure any targets in these imagery, we can estimate a length of a lava flow, a reach of a cinder and a sediment volume in volcanic eruption or landslide. Therefore in order to measure various information for a short time, we developed a simplified measurement system which uses these photographs. This system requires DEM in addition to photographs, but it is possible to use previously acquired DEM. To measure an object, we require only two steps. One is the determination of the position and the posture in which the photograph is shot. We determine these parameters using DEM. The other step is the measurement of an object in photograph. In this paper, we describe this system and show the experimental results to evaluate this system. In this experiment we measured the top of Mt. Usu by using two measurement method of this system. Then we can measure it about one hour and the difference between the measurement results and the airborne LiDAR data are less than 10 meter.

  9. Numerical probabilistic analysis for slope stability in fractured rock masses using DFN-DEM approach

    Directory of Open Access Journals (Sweden)

    Alireza Baghbanan

    2017-06-01

    Full Text Available Due to existence of uncertainties in input geometrical properties of fractures, there is not any unique solution for assessing the stability of slopes in jointed rock masses. Therefore, the necessity of applying probabilistic analysis in these cases is inevitable. In this study a probabilistic analysis procedure together with relevant algorithms are developed using Discrete Fracture Network-Distinct Element Method (DFN-DEM approach. In the right abutment of Karun 4 dam and downstream of the dam body, five joint sets and one major joint have been identified. According to the geometrical properties of fractures in Karun river valley, instability situations are probable in this abutment. In order to evaluate the stability of the rock slope, different combinations of joint set geometrical parameters are selected, and a series of numerical DEM simulations are performed on generated and validated DFN models in DFN-DEM approach to measure minimum required support patterns in dry and saturated conditions. Results indicate that the distribution of required bolt length is well fitted with a lognormal distribution in both circumstances. In dry conditions, the calculated mean value is 1125.3 m, and more than 80 percent of models need only 1614.99 m of bolts which is a bolt pattern with 2 m spacing and 12 m length. However, as for the slopes with saturated condition, the calculated mean value is 1821.8 m, and more than 80 percent of models need only 2653.49 m of bolts which is equivalent to a bolt pattern with 15 m length and 1.5 m spacing. Comparison between obtained results with numerical and empirical method show that investigation of a slope stability with different DFN realizations which conducted in different block patterns is more efficient than the empirical methods.

  10. Demência como fator de risco para fraturas graves em idosos

    Directory of Open Access Journals (Sweden)

    Carvalho Aline de Mesquita

    2002-01-01

    Full Text Available INTRODUÇÃO: As quedas entre pessoas idosas constituem importante problema de saúde pública devido à sua alta incidência, às complicações para a saúde e aos altos custos assistenciais. O estudo realizado visa a estimar a associação entre demência e ocorrência de quedas e fraturas entre idosos. MÉTODOS: Foi conduzido estudo caso-controle de 404 indivíduos com 60 ou mais anos de idade, da cidade do Rio de Janeiro, Brasil. Casos e controles foram pareados por idade, sexo e hospital. Os dados foram coletados por meio de entrevista estruturada com os idosos. Foram considerados portadores de quadro demencial idosos cuja pontuação no questionário BOAS fosse superior a dois. Foram obtidos odds ratios (OR ajustados por fatores potenciais de confusão, utilizando-se regressão logística condicional. RESULTADOS: As quedas distribuíram-se igualmente entre os períodos da manhã, tarde e noite, havendo uma redução em sua freqüência durante a madrugada. Acidentaram-se dentro de casa 78% dos idosos com demência, contra 55% daqueles sem essa doença. O OR não-ajustado para a associação entre demência e fratura grave foi de 2,0 (IC95%, 1,23-3,25. Após o ajuste por fatores de confusão, houve uma pequena redução dessa associação (OR=1,82, 1,03-3,23. CONCLUSÃO: Idosos com quadro demencial apresentam maior risco de caírem e ser hospitalizados por fratura do que idosos sem demência. Tal fato implica a necessidade de cuidados especiais com esses indivíduos, visando a minimizar o risco desses acidentes.

  11. DEM L241, A SUPERNOVA REMNANT CONTAINING A HIGH-MASS X-RAY BINARY

    International Nuclear Information System (INIS)

    Seward, F. D.; Charles, P. A.; Foster, D. L.; Dickel, J. R.; Romero, P. S.; Edwards, Z. I.; Perry, M.; Williams, R. M.

    2012-01-01

    A Chandra observation of the Large Magellanic Cloud supernova remnant DEM L241 reveals an interior unresolved source which is probably an accretion-powered binary. The optical counterpart is an O5III(f) star making this a high-mass X-ray binary with an orbital period likely to be of the order of tens of days. Emission from the remnant interior is thermal and spectral information is used to derive density and mass of the hot material. Elongation of the remnant is unusual and possible causes of this are discussed. The precursor star probably had mass >25 M ☉

  12. DEM L241, A SUPERNOVA REMNANT CONTAINING A HIGH-MASS X-RAY BINARY

    Energy Technology Data Exchange (ETDEWEB)

    Seward, F. D. [Smithsonian Astrophysical Observatory, 60 Garden Street, Cambridge, MA 02138 (United States); Charles, P. A. [School of Physics and Astronomy, University of Southampton, Highfield, Southampton SO17 1BJ (United Kingdom); Foster, D. L. [South African Astronomical Observatory, P.O. Box 9, Observatory 7935, Cape Town (South Africa); Dickel, J. R.; Romero, P. S. [Department of Physics and Astronomy, University of New Mexico, 1919 Lomas Boulevard NE, Albuquerque, NM 87131 (United States); Edwards, Z. I.; Perry, M.; Williams, R. M. [Department of Earth and Space Sciences, Columbus State University, Coca Cola Space Science Center, 701 Front Avenue, Columbus, GA 31901 (United States)

    2012-11-10

    A Chandra observation of the Large Magellanic Cloud supernova remnant DEM L241 reveals an interior unresolved source which is probably an accretion-powered binary. The optical counterpart is an O5III(f) star making this a high-mass X-ray binary with an orbital period likely to be of the order of tens of days. Emission from the remnant interior is thermal and spectral information is used to derive density and mass of the hot material. Elongation of the remnant is unusual and possible causes of this are discussed. The precursor star probably had mass >25 M {sub Sun}.

  13. Social Entrepreneurship im etablierten Wohlfahrtsstaat : Aktuelle empirische Befunde zu neuen und alten Akteuren auf dem Wohlfahrtsmarkt

    OpenAIRE

    Heinze, Rolf G.; Schönauer, Anna-Lena; Schneiders, Katrin; Grohs, Stephan; Ruddat, Claudia

    2013-01-01

    Im internationalen Vergleich hat sich die wissenschaftliche Diskussion um die gesellschaftliche Relevanz des Phänomens „Social Entrepreneurship“ (SE) in Deutschland relativ spät entwickelt. In Asien wurde die Debatte insbesondere durch die von Muhammad Yunus 1983 gegründete Grameen Bank angestoßen und spätestens seit der Auszeichnung Yunus‘ mit dem Friedensnobelpreis wird SE in vielen Nationen zunehmend als Chance wahrgenommen, soziale Missstände effektiv und nachhaltig zu bekämpfen....

  14. Rechargable Lithium-Air Batteries: Investigation of Redox Mediators Using DEMS

    DEFF Research Database (Denmark)

    Christensen, Mathias Kjærgård; Storm, Mie Møller; Norby, Poul

    2016-01-01

    material or electrolyte is being decomposed. This is also seen with Thermally reduced Graphene Oxide (TrGO). The graphene based cathode is interesting as it exhibits a high surface area which in turn increases capacity. Using the additive LiI, functioning as a redox mediator, the discharge curve remains...... is observed without the redox mediator [2]. This results in higher energy densities and ideally higher cyclability due to the lower over-potentials. Using DEMS we have investigated the gas evolved in the process to determine the electron to oxygen ratio using both cathode materials mentioned. As has been...

  15. O efeito de um programa psicomotor para idosos com demência

    OpenAIRE

    Henriques, Bebiana Maria Pais

    2013-01-01

    Trabalho de Projeto apresentado à Universidade Fernando Pessoa como parte dos requisitos para obtenção do grau de Mestre em Fisioterapia, ramo de Fisioterapia da Senescência Resultados de vários estudos fornecem informações relevantes à literatura do envelhecimento, sugerindo que há uma relação positiva entre a intervenção motora e cognitiva em idosos com demência (p. ex. Ferrer et al., 2003). Segundo a Alzheimer Europe (2012) existem 7,3 milhões de europeus dementes (153.000 port...

  16. Veno-occlusive liver disease after infradiaphragmatic total lymphoid irradiation. A rare complication; Die Venenverschlusskrankheit der Leber nach infradiaphragmaler total lymphatischer Bestrahlung. Eine seltene Nebenwirkung

    Energy Technology Data Exchange (ETDEWEB)

    Bischof, M.; Zierhut, D.; Gutwein, S.; Wannenmacher, M. [Heidelberg Univ. (DE.) Abt. fuer Klinische Radiologie - Schwerpunkt Strahlentherapie; Hansmann, J. [Heidelberg Univ. (DE.) Abt. fuer Radiologische Diagnostik; Stremmel, W.; Mueller, M. [Heidelberg Univ. (DE). Abt. Innere Medizin 4 (Schwerpunkt Gastroenterologie)

    2001-06-01

    -jaehrigen Patienten mit einem zentrozytisch-zentroblastischen Non-Hodgkin-Lymphom, Stadium IA (Lokalisation: Linke Leiste) wurde die gesamte Abdomen- und Beckenregion ('abdominelles Bad') bestrahlt. Bei einer woechentlichen Fraktionierung von fuenfmal 1,5 Gy wurde eine Gesamtdosis von 30 Gy appliziert. Zum Schutz der Risikoorgane wurden Nierenbloecke nach 13,5 Gy und Leberbloecke nach 25 Gy eingesetzt. Waehrend der letzten beiden Therapietage kam es zur Verschlechterung des Allgemeinzustandes des Patienten mit Gewichtszunahme, Vergroesserung des Bauchumfanges, Dyspnoe und einem Anstieg der Leberwerte. Die weiterfuehrende Diagnostik ergab eine Hepatosplenomegalie mit ausgepraegter Aszitesbildung und einen erhoehten portosystemischen Druckgradienten. Im Leberbiopsat wurde eine Venenverschlusskrankheit gefunden. Innerhalb 1 Woche nach Anlage eines transjungulaeren intrahepatischen portosystemischen Stent-Shunts (TIPSS), Vollheparinisierung und unter Diuretikagabe war der Patient beschwerdefrei. Die Leberwerte sind im Normbereich. Schlussfolgerung: Die Venenverschlusskrankheit der Leber (VOD) ist eine sehr seltene Nebenwirkung bei der abdominellen Bestrahlung nicht vorbehandelter follikulaerer Keimzentrumslymphome. Bei Oberbauchbeschwerden, Anstieg der Leberenzyme sowie Aszitesbildung, insbesondere in einem Zeitraum von bis zu 4 Monaten nach Therapieabschluss, muss an diese Komplikation gedacht werden. Genese, Diagnostik und Therapie der Venenverschlusskrankheit der Leber werden im Literaturueberblick praesentiert. (orig.)

  17. CFD calculation of a catalyst near the engine connected in series with an exhaust turbocharger; CFD-Berechnung fuer einen motornahen Katalysator nach Abgasturbolader

    Energy Technology Data Exchange (ETDEWEB)

    Kaiser, R.; Olesen, M. [Zeuna Staerker GmbH und Co. KG (Germany)

    2002-06-01

    Under the pressure of ever shorter development times and high demands on exhaust systems in terms of exhaust counterpressure, acoustic and sensory aspects and exhaust purification, Zeuna Staerker started at an early stage to use advanced CFD methods in their product development process. The contribution investigates the effects of simplified assumptions of boundary conditions, using laser optical flow measurements on a turbocharger with a catalyst near the engine. [German] Immer kuerzer werdende Entwicklungszeiten und die hohen Anforderungen an Abgasanlagen hinsichtlich Abgasgegendruck, Akustik, Sensorik und Abgasreinigung fuehrten bei Zeuna Staerker schon fruehzeitig zur Etablierung ausgereifter CFD-Methoden im Produktentwicklungsprozess. Doch wie stark werden CFD-Berechnungen durch die aufgepraegten Randbedingungen beeinflusst, wenn diese nach Abgasturbolader oft vereinfacht angenommen werden muessen? Mit Hilfe laseroptischer Stroemungsmessungen an einem Abgasturbolader mit motornahem Katalysator wird dieser Frage nachgegangen. (orig.)

  18. Short circuit - How our power supply became more expensive and got worse. A critical balance after eight years ''deregulation'' of the German Energy Economy; Kurzschluss - Wie unsere Stromversorgung teurer und schlechter wurde. Eine kritische Bilanz nach acht Jahren ''Liberalisierung'' der deutschen Energiewirtschaft

    Energy Technology Data Exchange (ETDEWEB)

    Leuschner, U.

    2007-07-01

    verursachte. Wie Leuschner feststellt, waere der Schaltungsfehler der EON-Netzleitstelle Lehrte vor ein paar Jahren noch vom System toleriert worden. Er habe nur deshalb so gravierende Folgen haben koennen, weil das UCTE-Netz inzwischen durch den Stromhandel und andere Folgen der Deregulierung bis an die Grenzen seiner Kapazitaet belastet sei. Im dritten Teil (''Netznutzung und Netzentgelte'') beleuchtet er in einem zusaetzlichen Kapitel die Bemuehungen der EU-Kommission, doch noch die Rahmenbedingungen fuer echten Wettbewerb herzustellen. Die neueste Forderung der Kommission nach eigentumsmaessiger Entflechtung der Netze deutet er als ''Flucht nach vorn'' angesichts der Tatsache, dass in saemtlichen EU-Laendern seit der Liberalisierung die Strompreise gestiegen sind und das zum Teil sogar ueber die Haelfte (mit der einzigen Ausnahme Englands, und hier auch nur der Haushaltsstrompreise). Kraeftig erweitert hat der Verfasser auch den vierten Teil zum Thema ''Management und Politik'': Zum einen findet man hier nun beschrieben, wie Ex-Bundeskanzler Gerhard Schroeder einen Spitzenjob beim russischen Energiekonzern Gazprom erhielt, dem er bereits in seiner Amtszeit als Bundeskanzler politisch behilflich war, und wie sein ehemaliger Wirtschaftsminister Wolfgang Clement in den Aufsichtsrat von RWE Power einziehen durfte. Zum anderen wird ein kritischer Blick auf die Werbekampagnen geworfen, mit denen die Energiekonzerne versuchen, ihr Erscheinungsbild in der Oeffentlichkeit aufzuhellen und den Energieverbrauchern ein X fuer ein U vorzumachen. (orig.)

  19. Auf in die Zukunft! Was kommt nach der bücherlosen Bibliothek? Reflexionen und Wahrnehmungsunterschiede zur Rolle von öffentlichen Bibliotheken

    Directory of Open Access Journals (Sweden)

    Wolfgang Kaiser

    2014-03-01

    Full Text Available Die Sehnsucht nach papierlosen und digitalen Bibliotheken ist auch in Deutschland weit verbreitet. Dabei entsteht der Irrglaube, die alleinige digitale Ausrichtung der eigenen Bibliothek mache diese zukunftsfähig. Ökonomisierungstendenzen, ein Mangel an Handeln nach ethischen Prinzipien, die ständige Messung von Ausleihen und Kunden sind das Spiegelbild des gegenwärtigen ideologischen Zeitgeistes. Im Artikel werden vermeintliche Glücksversprechen entlarvt und Alternativen aufgezeigt. Es wird für eine Öffnung hin zu anderen verwandten Disziplinen und der Förderung von mehr Vielfalt in der Ausbildung von Bibliothekaren und Bibliothekarinnen plädiert. Alternative Hinweise und Anregungen, welche für eine Neubewertung öffentlicher Bibliotheken eintreten, sind Teil des folgenden Beitrags. The longing for paperless and digital libraries is also very widespread in Germany as well as in other countries. At the same time there’s the misconception that the digital orientation might be the silver bullet for their institutions for a sustainable future. Tendencies of economization, the steady measurement of growth in library loans, and the notion and perception of clients and customers in libraries are a mirror image of our current ideological Zeitgeist. The article unmasks assumed promises of digitalization. It illustrates alternatives for the implementation of more democratic and participatory library policies. Furthermore the author pleads for an opening to other disciplines and the promotion of more diversity within the library field. Alternative leads and suggestions, which advocate a different evaluation of public libraries, are part of the following article.

  1. Prevention, screening and therapy of thyroid diseases and their cost-effectiveness; Praevention, Screening und Therapie gutartiger Schilddruesenerkrankungen unter dem Aspekt von Kosten und Nutzen

    Energy Technology Data Exchange (ETDEWEB)

    Dietlein, M.; Moka, D.; Schmidt, M.; Theissen, P.; Schicha, H. [Koeln Univ. (Germany). Klinik und Poliklinik fuer Nuklearmedizin

    2003-10-01

    60%. (orig.) [German] Kosten/Nutzenanalysen in Bezug auf gutartige Schilddruesenerkrankungen sind in der Literatur unterrepraesentiert. Insbesondere die Erhebung eines Geldwertes pro gewonnenem Lebensjahr gestaltet sich methodisch schwierig: Der Nutzen praeventiver Massnahmen ist weit in die Zukunft verlagert. Der Einfluss einer unbehandelten Schilddruesenerkrankung auf die Lebenszeit wird ebenfalls erst durch einen langfristigen Horizont und dann eher epidemiologisch als individuell zu erfassen sein. Als Prophylaxe (primaere Praevention) sind Programme zum Ausgleich des Iodmangels sowie die Aufklaerung ueber den negativen Einfluss des Rauchens auf die Entwicklung einer Struma oder eines M. Basedows aus entscheidungstheoretischer Sicht sehr kosteneffektiv. Screening-Programme (sekundaere Praevention) werden fuer die Parameter TSH, Calcium und Calcitonin diskutiert. Eine besonders guenstige Kosten-Effektivitaet des TSH-Screenings ist in besonderen Lebensphasen (Neugeborene, Schwangerschaft, postpartal, hoeheres Alter, stationaerer Patient mit akuter Erkrankung) und bei definierten Vorbefunden (TSH>2mU/l, TPO-Antikoerper) aus klinisch-epidemiologischer Sicht zu erwarten, ohne dass hierzu gesonderte gesundheitsoekonomische Berechnungen vorgelegt wurden. Andererseits konnte die Kosten-Effektivitaet eines generellen TSH-Screening ab dem 35. Lebensjahr in einer qualitativ hochwertigen gesundheitsoekonomischen Studie bereits belegt werden. Die Therapiestrategien bei gutartigen Schilddruesenerkrankungen (tertiaere Praevention) zielen auf eine Minimierung sekundaerer Krankheitsfolgen (Vorhofflimmern, Myokardinfarkt, Herztod) und iatrogener Nebenwirkungen. Beispiele fuer eine solche tertiaere Praevention sind die definitive Therapie (Radioiodtherapie) der Immunhyperthyreose M. Basedow bei unguenstigen initialen Praedikatoren fuer eine Rezidivhyperthyreose, die Radioiodtherapie der latenten Hyperthyreose sowie die Radioiodtherapie der grossvolumigen Struma bei aelteren oder

  2. Der Zusammenhang von Partnermarktopportunitäten aus dem Freundeskreis und der Stabilität von Paarbeziehungen : Eine Analyse mit den Daten des Partnermarktsurvey

    OpenAIRE

    Häring, Armando

    2014-01-01

    "Der Beitrag analysiert den Zusammenhang zwischen Partnermarktoportunitäten aus dem Freundeskreis und der Stabilität von Paarbeziehungen. Unter Verwendung des theoretischen Konzepts der Theorie der Interaktionsgelegenheiten sowie von Annahmen der Austauschtheorie und der Familienökonomie, werden mögliche Zusammenhänge zwischen gemeinsamen Freundeskreisen mit dem Partner, Partnermarktgelegenheiten aus dem Freundeskreis (sex ratio) und der Stabilität von Paarbeziehungen diskutiert. Der Beitrag ...

  3. Investigações epidemiológicas sobre demência nos países em desenvolvimento

    Directory of Open Access Journals (Sweden)

    M Scazufca

    2002-12-01

    Full Text Available Na medida em que a população mundial está envelhecendo, a demência está se constituindo em importante problema de saúde pública, particularmente nos países em desenvolvimento. Investigações epidemiológicas nestes países são escassas e apresentam dificuldades metodológicas adicionais, principalmente no que se refere à adequação sociocultural dos instrumentos utilizados para a definição de casos. Tendo em vista estas preocupações, foi fundado o "Grupo de Pesquisa em Demência 10/66", que é constituído por uma rede internacional de pesquisadores, predominantemente de países em desenvolvimento. O nome do grupo tem como referência o paradoxo de que menos de 10% dos estudos populacionais sobre demência são dirigidos aos 2/3 ou mais de casos de pessoas com demência que vivem em países em desenvolvimento. O objetivo do artigo é atualizar informações da literatura sobre as diferenças de prevalência e incidência de demência encontradas em países desenvolvidos e em desenvolvimento.

  4. Investigações epidemiológicas sobre demência nos países em desenvolvimento

    Directory of Open Access Journals (Sweden)

    Scazufca M

    2002-01-01

    Full Text Available Na medida em que a população mundial está envelhecendo, a demência está se constituindo em importante problema de saúde pública, particularmente nos países em desenvolvimento. Investigações epidemiológicas nestes países são escassas e apresentam dificuldades metodológicas adicionais, principalmente no que se refere à adequação sociocultural dos instrumentos utilizados para a definição de casos. Tendo em vista estas preocupações, foi fundado o "Grupo de Pesquisa em Demência 10/66", que é constituído por uma rede internacional de pesquisadores, predominantemente de países em desenvolvimento. O nome do grupo tem como referência o paradoxo de que menos de 10% dos estudos populacionais sobre demência são dirigidos aos 2/3 ou mais de casos de pessoas com demência que vivem em países em desenvolvimento. O objetivo do artigo é atualizar informações da literatura sobre as diferenças de prevalência e incidência de demência encontradas em países desenvolvidos e em desenvolvimento.

  5. Comparison of elevation derived from insar data with dem from topography map in Son Dong, Bac Giang, Viet Nam

    Science.gov (United States)

    Nguyen, Duy

    2012-07-01

    Digital Elevation Models (DEMs) are used in many applications in the context of earth sciences such as in topographic mapping, environmental modeling, rainfall-runoff studies, landslide hazard zonation, seismic source modeling, etc. During the last years multitude of scientific applications of Synthetic Aperture Radar Interferometry (InSAR) techniques have evolved. It has been shown that InSAR is an established technique of generating high quality DEMs from space borne and airborne data, and that it has advantages over other methods for the generation of large area DEM. However, the processing of InSAR data is still a challenging task. This paper describes InSAR operational steps and processing chain for DEM generation from Single Look Complex (SLC) SAR data and compare a satellite SAR estimate of surface elevation with a digital elevation model (DEM) from Topography map. The operational steps are performed in three major stages: Data Search, Data Processing, and product Validation. The Data processing stage is further divided into five steps of Data Pre-Processing, Co-registration, Interferogram generation, Phase unwrapping, and Geocoding. The Data processing steps have been tested with ERS 1/2 data using Delft Object-oriented Interferometric (DORIS) InSAR processing software. Results of the outcome of the application of the described processing steps to real data set are presented.

  6. DEM study of granular flow around blocks attached to inclined walls

    Directory of Open Access Journals (Sweden)

    Samsu Joel

    2017-01-01

    Full Text Available Damage due to intense particle-wall contact in industrial applications can cause severe problems in industries such as mineral processing, mining and metallurgy. Studying the flow dynamics and forces on containing walls can provide valuable feedback for equipment design and optimising operations to prolong the equipment lifetime. Therefore, solids flow-wall interaction phenomena, i.e. induced wall stress and particle flow patterns should be well understood. In this work, discrete element method (DEM is used to study steady state granular flow in a gravity-fed hopper like geometry with blocks attached to an inclined wall. The effects of different geometries, e.g. different wall angles and spacing between blocks are studied by means of a 3D DEM slot model with periodic boundary conditions. The findings of this work include (i flow analysis in terms of flow patterns and particle velocities, (ii force distributions within the model geometry, and (iii wall stress vs. model height diagrams. The model enables easy transfer of the key findings to other industrial applications handling granular materials.

  7. Historic Low Wall Detection via Topographic Parameter Images Derived from Fine-Resolution DEM

    Directory of Open Access Journals (Sweden)

    Hone-Jay Chu

    2017-11-01

    Full Text Available Coral walls protect vegetation gardens from strong winds that sweep across Xiji Island, Taiwan Strait for half the year. Topographic parameters based on light detection and ranging (LiDAR-based high-resolution digital elevation model (DEM provide obvious correspondence with the expected form of landscape features. The information on slope, curvature, and openness can help identify the location of landscape features. This study applied the automatic landscape line detection to extract historic vegetable garden wall lines from a LiDAR-derived DEM. The three rapid processes used in this study included the derivation of topographic parameters, line extraction, and aggregation. The rules were extracted from a decision tree to check the line detection from multiple topographic parameters. Results show that wall line detection with multiple topographic parameter images is an alternative means of obtaining essential historic wall feature information. Multiple topographic parameters are highly related to low wall feature identification. Furthermore, the accuracy of wall feature detection is 74% compared with manual interpretation. Thus, this study provides rapid wall detection systems with multiple topographic parameters for further historic landscape management.

  8. DEM study of granular flow around blocks attached to inclined walls

    Science.gov (United States)

    Samsu, Joel; Zhou, Zongyan; Pinson, David; Chew, Sheng

    2017-06-01

    Damage due to intense particle-wall contact in industrial applications can cause severe problems in industries such as mineral processing, mining and metallurgy. Studying the flow dynamics and forces on containing walls can provide valuable feedback for equipment design and optimising operations to prolong the equipment lifetime. Therefore, solids flow-wall interaction phenomena, i.e. induced wall stress and particle flow patterns should be well understood. In this work, discrete element method (DEM) is used to study steady state granular flow in a gravity-fed hopper like geometry with blocks attached to an inclined wall. The effects of different geometries, e.g. different wall angles and spacing between blocks are studied by means of a 3D DEM slot model with periodic boundary conditions. The findings of this work include (i) flow analysis in terms of flow patterns and particle velocities, (ii) force distributions within the model geometry, and (iii) wall stress vs. model height diagrams. The model enables easy transfer of the key findings to other industrial applications handling granular materials.

  9. CFD-DEM Simulation of Minimum Fluidisation Velocity in Two Phase Medium

    Directory of Open Access Journals (Sweden)

    H Khawaja

    2016-09-01

    Full Text Available In this work, CFD-DEM (computational fluid dynamics - discrete element method has been used to model the 2 phase flow composed of solid particle and gas in the fluidised bed. This technique uses the Eulerian and the Langrangian methods to solve fluid and particles respectively. Each particle is treated as a discrete entity whose motion is governed by Newton's laws of motion. The particle-particle and particle-wall interaction is modelled using the classical contact mechanics. The particles motion is coupled with the volume averaged equations of the fluid dynamics using drag law. In fluidised bed, particles start experiencing drag once the fluid is passing through. The solid particles response to it once drag experienced is just equal to the weight of the particles. At this moment pressure drop across the bed is just equal to the weight of particles divide by the cross-section area. This is the first regime of fluidization, also referred as ‘the regime of minimum fluidization’. In this study, phenomenon of minimum fluidization is studied using CFD-DEM simulation with 4 different sizes of particles 0.15 mm, 0.3 mm, 0.6 mm, and 1.2 mm diameters. The results are presented in the form of pressure drop across the bed with the fluid superficial velocity. The achieved results are found in good agreement with the experimental and theoretical data available in literature.

  10. CFD-DEM Simulation of Propagation of Sound Waves in Fluid Particles Fluidised Medium

    Directory of Open Access Journals (Sweden)

    H Khawaja

    2016-09-01

    Full Text Available In this work, speed of sound in 2 phase mixture has been explored using CFD-DEM (Computational Fluid Dynamcis - Discrete Element Modelling. In this method volume averaged Navier Stokes, continuity and energy equations are solved for fluid. Particles are simulated as individual entities; their behaviour is captured by Newton's laws of motion and classical contact mechanics. Particle-fluid interaction is captured using drag laws given in literature. The speed of sound in a medium depends on physical properties. It has been found experimentally that speed of sound drops significantly in 2 phase mixture of fluidised particles because of its increased density relative to gas while maintaining its compressibility. Due to the high rate of heat transfer within 2 phase medium as given in Roy et al. (1990, it has been assumed that the fluidised gas-particle medium is isothermal. The similar phenomenon has been tried to be captured using CFD-DEM numerical simulation. The disturbance is introduced and fundamental frequency in the medium is noted to measure the speed of sound for e.g. organ pipe. It has been found that speed of sound is in agreement with the relationship given in Roy et al. (1990. Their assumption that the system is isothermal also appears to be valid.

  11. Toward the modeling of combustion reactions through discrete element method (DEM) simulations

    Science.gov (United States)

    Reis, Martina Costa; Alobaid, Falah; Wang, Yongqi

    2018-03-01

    In this work, the process of combustion of coal particles under turbulent regime in a high-temperature reaction chamber is modeled through 3D discrete element method (DEM) simulations. By assuming the occurrence of interfacial transport phenomena between the gas and solid phases, one investigates the influence of the physicochemical properties of particles on the rates of heterogeneous chemical reactions, as well as the influence of eddies present in the gas phase on the mass transport of reactants toward the coal particles surface. Moreover, by considering a simplistic chemical mechanism for the combustion process, thermochemical and kinetic parameters obtained from the simulations are employed to discuss some phenomenological aspects of the combustion process. In particular, the observed changes in the mass and volume of coal particles during the gasification and combustion steps are discussed by emphasizing the changes in the chemical structure of the coal. In addition to illustrate how DEM simulations can be used in the modeling of consecutive and parallel chemical reactions, this work also shows how heterogeneous and homogeneous chemical reactions become a source of mass and energy for the gas phase.

  12. Magnetisches Tracking für die Navigation mit dem da Vinci® Surgical System

    Science.gov (United States)

    Nickel, Felix; Wegner, Ingmar; Kenngott, Hannes; Neuhaus, Jochen; Müller-Stich, Beat P.; Meinzer, Hans-Peter; Gutt, Carsten N.

    In dieser Studie wurde untersucht ob in einem typischen OP-Aufbau mit dem da Vinci® Telemanipulator elektromagnetisches Tracking für die Realisation eines Navigationssystems eingesetzt werden kann. Hierfür wurde in einem realen OP-Aufbau untersucht, wie stark metallische und ferromagnetisch wirksame Objekte wie Operationstisch und Telemanipulator das elektromagnetische Feld des Trackingsystems beeinflussen. Die Ergebnisse zeigen, dass der Telemanipulator nur unwesentlich die Störung des Magnetfeldes durch den OP-Tisch verstärkt. Insbesondere die Bewegung der Instrumente im Trackingvolumen verursachte keine zusätzliche relevante Störung des Magnetfeldes. Bei Begrenzung des Trackingvolumens auf eine Länge von 190 mm, Höhe von 200mm und Breite von 400 mm war der maximale Fehler in diesem Bereich an allen Messpunkten kleiner 10 mm. Der Einsatz von elektromagnetischem Tracking für die Navigation mit dem da Vinci® Surgical System ist somit in einem begrenzten Arbeitsvolumen mit hinreichender Genauigkeit möglich.

  13. 1963 Vajont rock slide: a comparison between 3D DEM and 3D FEM

    Science.gov (United States)

    Crosta, Giovanni; Utili, Stefano; Castellanza, Riccardo; Agliardi, Federico; Bistacchi, Andrea; Weng Boon, Chia

    2013-04-01

    Data on the exact location of the failure surface of the landslide have been used as the starting point for the modelling of the landslide. 3 dimensional numerical analyses were run employing both the discrete element method (DEM) and a Finite Element Method (FEM) code. In this work the focus is on the prediction of the movement of the landlside during its initial phase of detachment from Mount Toc. The results obtained by the two methods are compared and conjectures on the observed discrepancies of the predictions between the two methods are formulated. In the DEM simulations the internal interaction of the sliding blocks and the expansion of the debris is obtained as a result of the kinematic interaction among the rock blocks resulting from the jointing of the rock mass involved in the slide. In the FEM analyses, the c-phi reduction technique was employed along the predefine failure surface until the onset of the landslide occurred. In particular, two major blocks of the landslide were identified and the stress, strain and displacement fields at the interface between the two blocks were analysed in detail.

  14. DEM modeling of failure mechanisms induced by excavations on the Moon

    Science.gov (United States)

    jiang, mingjing; shen, zhifu; Utili, Stefano

    2013-04-01

    2D Discrete Element Method (DEM) analyses were performed for excavations supported by retaining walls in lunar environment. The lunar terrain is made of a layer of sand (regolith) which differs from terrestrial sands for two main features: the presence of adhesive attractive forces due to van der Waals interactions and grains being very irregular in shape leading to high interlocking. A simplified contact model based on linear elasticity and perfect plasticity was employed. The contact model includes a moment - relative rotation law to account for high interlocking among grains and a normal adhesion law to account for the van der Waals interactions. Analyses of the excavations were run under both lunar and terrestrial environments. Under lunar environment, gravity is approximately one sixth than the value on Earth and adhesion forces between grains of lunar regolith due to van der Waals interactions are not negligible. From the DEM simulations it emerged that van der Waals interactions may significantly increase the bending moment and deflection of the retaining wall, and the ground displacements. Hence this study indicates that an unsafe estimate of the wall response to an excavation on the Moon would be obtained from physical experiments performed in a terrestrial environment, i.e., considering the effect of gravity but neglecting the van der Waals interactions.

  15. An Automated Processing Algorithm for Flat Areas Resulting from DEM Filling and Interpolation

    Directory of Open Access Journals (Sweden)

    Xingwei Liu

    2017-11-01

    Full Text Available Correction of digital elevation models (DEMs for flat areas is a critical process for hydrological analyses and modeling, such as the determination of flow directions and accumulations, and the delineation of drainage networks and sub-basins. In this study, a new algorithm is proposed for flat correction/removal. It uses the puddle delineation (PD program to identify depressions (including their centers and overflow/spilling thresholds, compute topographic characteristics, and further fill the depressions. Three different levels of elevation increments are used for flat correction. The first and second level of increments create flows toward the thresholds and centers of the filled depressions or flats, while the third level of small random increments is introduced to cope with multiple threshold conditions. A set of artificial surfaces and two real-world landscapes were selected to test the new algorithm. The results showed that the proposed method was not limited by the shapes, the number of thresholds, and the surrounding topographic conditions of flat areas. Compared with the traditional methods, the new algorithm simplified the flat correction procedure and reduced the final elevation increments by 5.71–33.33%. This can be used to effectively remove/correct topographic flats and create flat-free DEMs.

  16. Application of the PROMETHEE technique to determine depression outlet location and flow direction in DEM

    Science.gov (United States)

    Chou, Tien-Yin; Lin, Wen-Tzu; Lin, Chao-Yuan; Chou, Wen-Chieh; Huang, Pi-Hui

    2004-02-01

    With the fast growing progress of computer technologies, spatial information on watersheds such as flow direction, watershed boundaries and the drainage network can be automatically calculated or extracted from a digital elevation model (DEM). The stubborn problem that depressions exist in DEMs has been frequently encountered while extracting the spatial information of terrain. Several filling-up methods have been proposed for solving depressions. However, their suitability for large-scale flat areas is inadequate. This study proposes a depression watershed method coupled with the Preference Ranking Organization METHod for Enrichment Evaluations (PROMETHEEs) theory to determine the optimal outlet and calculate the flow direction in depressions. Three processing procedures are used to derive the depressionless flow direction: (1) calculating the incipient flow direction; (2) establishing the depression watershed by tracing the upstream drainage area and determining the depression outlet using PROMETHEE theory; (3) calculating the depressionless flow direction. The developed method was used to delineate the Shihmen Reservoir watershed located in Northern Taiwan. The results show that the depression watershed method can effectively solve the shortcomings such as depression outlet differentiating and looped flow direction between depressions. The suitability of the proposed approach was verified.

  17. Landslide Detection in the Carlyon Beach, WA Peninsula: Analysis Of High Resolution DEMs

    Science.gov (United States)

    Fayne, J.; Tran, C.; Mora, O. E.

    2017-12-01

    Landslides are geological events caused by slope instability and degradation, leading to the sliding of large masses of rock and soil down a mountain or hillside. These events are influenced by topography, geology, weather and human activity, and can cause extensive damage to the environment and infrastructure, such as the destruction of transportation networks, homes, and businesses. It is therefore imperative to detect early-warning signs of landslide hazards as a means of mitigation and disaster prevention. Traditional landslide surveillance consists of field mapping, but the process is expensive and time consuming. This study uses Light Detection and Ranging (LiDAR) derived Digital Elevation Models (DEMs) and k-means clustering and Gaussian Mixture Model (GMM) to analyze surface roughness and extract spatial features and patterns of landslides and landslide-prone areas. The methodology based on several feature extractors employs an unsupervised classifier on the Carlyon Beach Peninsula in the state of Washington to attempt to identify slide potential terrain. When compared with the independently compiled landslide inventory map, the proposed algorithm correctly classifies up to 87% of the terrain. These results suggest that the proposed methods and LiDAR-derived DEMs can provide important surface information and be used as efficient tools for digital terrain analysis to create accurate landslide maps.

  18. Experimental study and DEM simulation of granular flow through a new sphere discharge valve

    International Nuclear Information System (INIS)

    Zhang He; Li Tianjin; Huang Zhiyong; Gao Zhi; Qi Weiwei; Bo Hanliang

    2015-01-01

    Experiments and DEM simulation have been conducted to investigate the granular flow through a new type of sphere discharge valve. The new sphere discharge valve was based on the principle of angle of repose. The glass sphere was used in the granular discharge experiments. Experimental results showed that the relation between the averaging sphere discharge mass flow rate and the stroke of the sphere discharge valve were consisted of three zones, i.e. the idle stroke zone, linearly zone and orifice restriction zone. The Beverloo's law was suitable for the granular flow through multi-orifices in the orifice restriction zone. The variation of averaging sphere discharge mass flow rate with the stroke of the sphere discharge valve was described by Beverloo's law with the modification based on the stroke of the sphere discharge valve. DEM simulation results showed that the drained angle of repose during granular flow in the sphere storage vessel remained 23 degrees with different stroke of the sphere discharge valve. (authors)

  19. Kinematic behaviour of a large earthflow defined by surface displacement monitoring, DEM differencing, and ERT imaging

    Science.gov (United States)

    Prokešová, Roberta; Kardoš, Miroslav; Tábořík, Petr; Medveďová, Alžbeta; Stacke, Václav; Chudý, František

    2014-11-01

    Large earthflow-type landslides are destructive mass movement phenomena with highly unpredictable behaviour. Knowledge of earthflow kinematics is essential for understanding the mechanisms that control its movements. The present paper characterises the kinematic behaviour of a large earthflow near the village of Ľubietová in Central Slovakia over a period of 35 years following its most recent reactivation in 1977. For this purpose, multi-temporal spatial data acquired by point-based in-situ monitoring and optical remote sensing methods have been used. Quantitative data analyses including strain modelling and DEM differencing techniques have enabled us to: (i) calculate the annual landslide movement rates; (ii) detect the trend of surface displacements; (iii) characterise spatial variability of movement rates; (iv) measure changes in the surface topography on a decadal scale; and (v) define areas with distinct kinematic behaviour. The results also integrate the qualitative characteristics of surface topography, in particular the distribution of surface structures as defined by a high-resolution DEM, and the landslide subsurface structure, as revealed by 2D resistivity imaging. Then, the ground surface kinematics of the landslide is evaluated with respect to the specific conditions encountered in the study area including slope morphology, landslide subsurface structure, and local geological and hydrometeorological conditions. Finally, the broader implications of the presented research are discussed with particular focus on the role that strain-related structures play in landslide kinematic behaviour.

  20. Aerial photography flight quality assessment with GPS/INS and DEM data

    Science.gov (United States)

    Zhao, Haitao; Zhang, Bing; Shang, Jiali; Liu, Jiangui; Li, Dong; Chen, Yanyan; Zuo, Zhengli; Chen, Zhengchao

    2018-01-01

    The flight altitude, ground coverage, photo overlap, and other acquisition specifications of an aerial photography flight mission directly affect the quality and accuracy of the subsequent mapping tasks. To ensure smooth post-flight data processing and fulfill the pre-defined mapping accuracy, flight quality assessments should be carried out in time. This paper presents a novel and rigorous approach for flight quality evaluation of frame cameras with GPS/INS data and DEM, using geometric calculation rather than image analysis as in the conventional methods. This new approach is based mainly on the collinearity equations, in which the accuracy of a set of flight quality indicators is derived through a rigorous error propagation model and validated with scenario data. Theoretical analysis and practical flight test of an aerial photography mission using an UltraCamXp camera showed that the calculated photo overlap is accurate enough for flight quality assessment of 5 cm ground sample distance image, using the SRTMGL3 DEM and the POSAV510 GPS/INS data. An even better overlap accuracy could be achieved for coarser-resolution aerial photography. With this new approach, the flight quality evaluation can be conducted on site right after landing, providing accurate and timely information for decision making.

  1. Inundation Analysis of Reservoir Flood Based on Computer Aided Design (CAD and Digital Elevation Model (DEM

    Directory of Open Access Journals (Sweden)

    Jiqing Li

    2018-04-01

    Full Text Available GIS (Geographic Information System can be used to combine multiple hydrologic data and geographic data for FIA (Flood Impact Assessment. For a developing country like China, a lot of geographic data is in the CAD (Computer Aided Design format. The commonly used method for converting CAD into DEM may result in data loss. This paper introduces a solution for the conversion between CAD data and DEM data. The method has been applied to the FIA based on the topographic map of CAD in Hanjiang River. When compared with the other method, the new method solves the data loss problem. Besides, the paper use GIS to simulate the inundation range, area, and the depth distribution of flood backwater. Based on the analysis, the author concludes: (1 the differences of the inundation areas between the flood of HQ100 and the flood of HQ50 are small. (2 The inundation depth shows a decreasing trend along the upstream of the river. (3 The inundation area less than 4 m in flood of HQ50 is larger than that in flood of HQ100, the result is opposite when the inundation depth is greater than 4 m. (4 The flood loss is 392.32 million RMB for flood of HQ50 and 610.02 million RMB for flood of HQ100. The method can be applied to FIA.

  2. Parallel Resolved Open Source CFD-DEM: Method, Validation and Application

    Directory of Open Access Journals (Sweden)

    A. Hager

    2014-03-01

    Full Text Available In the following paper the authors present a fully parallelized Open Source method for calculating the interaction of immersed bodies and surrounding fluid. A combination of computational fluid dynamics (CFD and a discrete element method (DEM accounts for the physics of both the fluid and the particles. The objects considered are relatively big compared to the cells of the fluid mesh, i.e. they cover several cells each. Thus this fictitious domain method (FDM is called resolved. The implementation is realized within the Open Source framework CFDEMcOupling (www.cfdem.com, which provides an interface between OpenFOAM® based CFD-solvers and the DEM software LIGGGHTS (www.liggghts.com. While both LIGGGHTS and OpenFOAM® were already parallelized, only a recent improvement of the algorithm permits the fully parallel computation of resolved problems. Alongside with a detailed description of the method, its implementation and recent improvements, a number of application and validation examples is presented in the scope of this paper.

  3. CFD-DEM simulation of a conceptual gas-cooled fluidized bed nuclear reactor

    International Nuclear Information System (INIS)

    Almeida, Lucilla C.; Su, Jian

    2015-01-01

    Several conceptual designs of the fluidized-bed nuclear reactor have been proposed due to its many advantages over conventional nuclear reactors such as PWRs and BWRs. Amongst their characteristics, the enhanced heat transfer and mixing enables a more uniform temperature distribution, reducing the risk of hot-spot and excessive fuel temperature, in addition to resulting in a higher burnup of the fuel. Furthermore, the relationship between the bed height and reactor neutronics turns the coolant flow rate control into a power production mechanism. Moreover, the possibility of removing the fuel by gravity from the movable core in case of a loss-of-cooling accident increases its safety. High-accuracy modeling of particles and coolant flow in fluidized bed reactors is needed to evaluate reliably the thermal-hydraulic efficiency and safety margin. The two-way coupling between solid and fluid can account for high-fidelity solid-solid interaction and reasonable accuracy in fluid calculation and fluid-solid interaction. In the CFD-DEM model, the particles are modeled as a discrete phase, following the DEM approach, whereas the fluid flow is treated as a continuous phase, described by the averaged Navier-Stokes equations on a computational cell scale. In this work, the coupling methodology between Fluent and Rocky is described. The numerical approach was applied to the simulation of a bubbling fluidized bed and the results were compared to experimental data and showed good agreement. (author)

  4. Constructing Palaeo-DEMs in landscape evolution: example of the Geren catchment, Turkey

    Science.gov (United States)

    van Gorp, Wouter; Schoorl, Jeroen M.; Veldkamp, Tom; Maddy, Darrel; Demir, Tuncer; Aytac, Serdar

    2017-04-01

    How to reconstruct the past landscape and how does this influence your modelling results? This is an important paradigma in the soilscape and landscape evolution modelling community. Here an example of Turkey will be presented where a 300 ka LEM simulation requested to the thoroughly think about the initial landscape as an important input. What information can be used to know the morphology of a landscape 300 ka ago? The Geren catchment, a tributary of the upstream Gediz river near Kula, Turkey, has been influenced by base level changes during the Late Pleistocene and Holocene. Different lavaflows have blocked the Gediz and Geren river several times over in the timespan of the last 300 ka -200 Ka and in the recent Holocene. The heavily dissected Geren catchment shows a landscape evolution which is more complex than just a reaction on these base level changes. The steps and inputs of the palaeo DEM reconstruction will be presented and the modelling results will be presented. Keywords: Digital Elevation Model, Palaeo DEMs, Numerical modelling

  5. Comparison Between Topographic Expression of RADARSAT and DEM in Simpang Pulai to Pos Selim, Malaysia

    Directory of Open Access Journals (Sweden)

    M.F.Ramli

    2010-01-01

    Full Text Available Radar and digital elevation model had been utilised in many structural studies. The main objective of this study is to compare the RADARSAT and digital elevation model for lineament interpretation which probably represent the main joints or faults along the Simpang Pulai to Pos Selim highway, Malaysia. These joints and faults may influence the instability along the highway. Manual comparison in terms of topographical aspect was undertaken between RADARSAT with 25 m spatial resolution and digital elevation model derived from 20 m contour interval of the topographical map. The previously interpreted lineaments of more than 2 km in the study area was draped over the RADARSAT and digital elevation model to compared whether the lineament concurred with the topographical representation. The interpreted lineaments were derived from Landsat TM of 1990 and 2002, where the DEM had been utilised in the negative lineament determination. It is concluded that the application RADARSAT is not very useful in terms of topographical expression in the structural geological interpretation for the study area compared to DEM derived from contour data. Further work is suggested before any conclusion can be confidently derived.

  6. An algorithm for generation of DEMs from contour lines considering geomorphic features

    Directory of Open Access Journals (Sweden)

    Xiao-Ping Rui

    2016-04-01

    Full Text Available Geomorphic information is omitted from many existing methods of generating gridded digital elevation models (DEMs from contour lines, resulting in significant errors during interpolation. Here, we present an advanced schema for improvement of the comprehensive regionalized method of linear interpolation. This approach uses a moving fitting method for an interpolated point and selects elevation points that are representative of geomorphic features as a whole to improve interpolation quality. A total of 16 points are selected, according to certain criteria, in eight directions surrounding the interpolated point; thus, there are two points in each direction, which is sufficient to provide an accurate representation of the geomorphic features of the DEM. Our method introduces virtual control points to prevent sudden changes in the interpolation results, which helps to overcome problems related to the distortion of the local geospatial distribution in areas where feature geomorphic information is inadequate. We construct the spline interpolation function using intersection points and virtual control points, all of which are applied to compute the point elevation. Moreover, we index all elevation values and spatial points of linear features using the R-tree method to ensure that points related to an interpolated position can be retrieved as quickly as possible. Finally, we test our method using a coal mine elevation dataset. The results confirm that our proposed method can generate DEMs smoothly and, in particular, avoid problems related to local distortion.    Resumen La información geomórfica se omite en muchos de los métodos de generación de Modelos Digitales de Elevación (DEM, en inglés que se elaboran a partir de líneas de contorno, lo que resulta en errores significativos durante la interpolación. En este trabajo se presenta un esquema avanzado para el mejoramiento del método comprensivo regionalizado de interpolación lineal. Esta

  7. Satisfação sexual na demência Sexual satisfaction in dementia

    Directory of Open Access Journals (Sweden)

    Marcela Moreira Lima Nogueira

    2013-01-01

    Full Text Available CONTEXTO: A demência pode resultar em comprometimento da intimidade e sexualidade de casais idosos. OBJETIVOS: Avaliar alterações na atividade sexual, bem como os fatores de satisfação e/ou insatisfação sexual de casais nos quais um dos parceiros possua demência. MÉTODO: Busca nas bases de dados ISI, PubMed/Medline e SciELO de artigos sobre sexualidade na demência, entre janeiro de 1990 e março de 2012, utilizando as palavras-chave: "demência", "satisfação sexual", "intimidade" e "sexualidade". RESULTADOS: Foram encontrados 12 artigos. A sobrecarga de cuidados e a alteração de papéis na relação conjugal foram consideradas as principais causas para o declínio da atividade sexual. A disfunção erétil em pacientes e cônjuges, a capacidade decisória para o consentimento da relação sexual por parte do paciente demenciado e os problemas referentes à idade e à saúde (física e emocional do cônjuge e/ou paciente foram os fatores associados à insatisfação sexual. CONCLUSÃO: A intimidade e a atividade sexual dos casais em que um dos parceiros é portador de demência são influenciadas negativamente pela relação de cuidados decorrente da doença e pela sobrecarga dos cônjuges. Por outro lado, a atividade sexual pode ser positivamente substituída por demonstrações de carinho e empatia entre os cônjuges.BACKGROUND: Dementia may result on impairment in intimacy and sexuality of elderly couples. OBJECTIVES: Evaluate changes in sexual activity, as well as the factors which cause sexual satisfaction and/or dissatisfaction in couples in which one of the partners has dementia. METHOD: A search at ISI, PubMed/Medline and SciELO was made for articles about sexuality in dementia, from January 1990 to March 2012, using the keywords: "dementia", "sexual satisfaction", "intimacy" and "sexuality". RESULTS: Twelve articles were selected. The burden of care and the change of roles in couples' relationship were the main reasons for

  8. Optimizing landslide susceptibility zonation: Effects of DEM spatial resolution and slope unit delineation on logistic regression models

    Science.gov (United States)

    Schlögel, R.; Marchesini, I.; Alvioli, M.; Reichenbach, P.; Rossi, M.; Malet, J.-P.

    2018-01-01

    We perform landslide susceptibility zonation with slope units using three digital elevation models (DEMs) of varying spatial resolution of the Ubaye Valley (South French Alps). In so doing, we applied a recently developed algorithm automating slope unit delineation, given a number of parameters, in order to optimize simultaneously the partitioning of the terrain and the performance of a logistic regression susceptibility model. The method allowed us to obtain optimal slope units for each available DEM spatial resolution. For each resolution, we studied the susceptibility model performance by analyzing in detail the relevance of the conditioning variables. The analysis is based on landslide morphology data, considering either the whole landslide or only the source area outline as inputs. The procedure allowed us to select the most useful information, in terms of DEM spatial resolution, thematic variables and landslide inventory, in order to obtain the most reliable slope unit-based landslide susceptibility assessment.

  9. BOREAS HYD-8 DEM Data Over the NSA-MSA and SSA-MSA in the UTM Projection

    Science.gov (United States)

    Wang, Xue-Wen; Hall, Forrest G. (Editor); Knapp, David E. (Editor); Band, L. E.; Smith, David E. (Technical Monitor)

    2000-01-01

    The BOREAS HYD-8 team focused on describing the scaling behavior of water and carbon flux processes at local and regional scales. These DEMs were produced from digitized contours at a cell resolution of 100 meters. Vector contours of the area were used as input to a software package that interpolates between contours to create a DEM representing the terrain surface. The vector contours had a contour interval of 25 feet. The data cover the BOREAS MSAs of the SSA and NSA and are given in a UTM map projection. Most of the elevation data from which the DEM was produced were collected in the 1970s or 1980s. The data are stored in binary, image format files. The data files are available on a CD-ROM (see document number 20010000884) or from the Oak Ridge National Laboratory (ORNL) Distributed Active Archive Center (DAAC).

  10. The EVE plus RHESSI DEM for Solar Flares, and Implications for Residual Non-Thermal X-Ray Emission

    Science.gov (United States)

    McTiernan, James; Caspi, Amir; Warren, Harry

    2016-05-01

    Solar flare spectra are typically dominated by thermal emission in the soft X-ray energy range. The low energy extent of non-thermal emission can only be loosely quantified using currently available X-ray data. To address this issue, we combine observations from the EUV Variability Experiment (EVE) on-board the Solar Dynamics Observatory (SDO) with X-ray data from the Reuven Ramaty High Energy Spectroscopic Imager (RHESSI) to calculate the Differential Emission Measure (DEM) for solar flares. This improvement over the isothermal approximation helps to resolve the ambiguity in the range where the thermal and non-thermal components may have similar photon fluxes. This "crossover" range can extend up to 30 keV.Previous work (Caspi et.al. 2014ApJ...788L..31C) concentrated on obtaining DEM models that fit both instruments' observations well. For this current project we are interested in breaks and cutoffs in the "residual" non-thermal spectrum; i.e., the RHESSI spectrum that is left over after the DEM has accounted for the bulk of the soft X-ray emission. As in our earlier work, thermal emission is modeled using a DEM that is parametrized as multiple gaussians in temperature. Non-thermal emission is modeled as a photon spectrum obtained using a thin-target emission model ('thin2' from the SolarSoft Xray IDL package). Spectra for both instruments are fit simultaneously in a self-consistent manner.For this study, we have examined the DEM and non-thermal resuidual emission for a sample of relatively large (GOES M class and above) solar flares observed from 2011 to 2014. The results for the DEM and non-thermal parameters found using the combined EVE-RHESSI data are compared with those found using only RHESSI data.

  11. Influence of different DEMs on the quality of the InSAR results: case study over Bankya and Mirovo areas

    Science.gov (United States)

    Nikolov, Hristo; Atanasova, Mila

    2017-10-01

    One of the key input parameters in obtaining end products from SAR data is the DEM used during their processing. This holds true especially when persistent scatterers InSAR method should be applied for example to study slow moving landslides or subsidence. Since nowadays most of the raw SAR data are of space borne origin for their correct processing to high precision products for relatively small areas with centimeter accuracy a DEM taking into account the particularities of the local topography is needed. Most of the DEMs used by the SAR processing software such as SRTM or ASTER are obtained by the same type of instrument and present some disagreements with height information acquired by leveling measurements or other geodetic means. This was the motivation for initiating this research - to prove the need of creating and using local DEM in SAR data processing at small scale and to check what the magnitude of the discrepancy between final InSAR products is in both cases where SRTM/ASTER and local DEM has been used. In addition investigated were two scenarios for SAR data processing - one with small baseline between image pairs and one having large baseline image pairs - in order to find out in which case local DEM has bigger impact. In course of this study two reference areas were considered - Bankya village near Sofia (SW region of Bulgaria) and Mirovo salt extraction site (NE region of Bulgaria). The reason those areas were selected lies in the high number of landslides registered and monitored by the competent authorities in the mentioned locations. The significance of the results obtained is witnessed by the fact that both sites we used have been included as reference sites for Bulgaria in the PanGeo EU funded project dealing with delivering information regarding ground instability geohazard as areas prone to subsidence of natural and manmade origin. In the said project largest part of the information has been extracted from Envisat SAR data, but now this

  12. Lectures held at the congress on ``Gas hydrates: problem substance / resource``, organised by the GDMK Division for ``Exploration and Extraction`` and the Institute for Mineral Oil and Natural Gas Research, in Clausthal-Zellerfeld (Harz) on 6/7 November 1997. Author`s manuscripts; Vortraege der Veranstaltung ``Gashydrate: Problemstoff/Resource`` des GDMK-Fachbereichs `Aufsuchung und Gewinnung` und dem Institut fuer Erdoel- und Erdgasforschung am 06. und 07. November 1997 in Clausthal-Zellerfeld (Harz). Autorenmanuskripte

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    The following topics are dealt with in detail: the chemical and physical properties of gas hydrates as derivable from their phase behaviour; the significance and occurrence of gas hydrates in offshore areas; gas hydrates and permafrost in continental northern West Siberia; information on HYACE, a research project of the European Union on test drilling for gas hydrates in offshore areas; sediment-mechanical criteria of gas hydrate formation in deep-sea sediments; gas hydrate formation in gas cavern storages; the use of hydrate inhibitors in operating natural gas storages; and the inhibition of gas hydrates with kinetic inhibitors. Eight abstracts were abstracted individually for the Energy Database. (MSK) [Deutsch] Folgende Themen werden detailliert behandelt: die chemischen und physikalischen Eigenschaften von Gashydraten,welche aus dem Phasenverhalten der Gashydrate herzuleiten sind; zur Bedeutung und Vorkommen von Gashydraten im Offshore-Bereich; Gashydrate und Permafrost im kontinentalen noerdlichen Westsibirien; Informationen zu HYACE, einem Forschungsprojekt der Europaeischen Union zu Probebohrungen nach Gashydraten im Offshore-Bereich; sedimentmechanische Kriterien bei der Gashydratbildung in Tiefseesedimenten; die Gashydratbildung in Gaskavernenspeichern; der Einsatz von Hydratinhibitoren beim Betrieb von Erdgasspeichern sowie die Inhibierung von Gashydraten mit kinetischen Inhibitoren. Fuer die Datenbank Energy wurden acht Beitraege einzeln aufgenommen.

  13. MARE2DEM: a 2-D inversion code for controlled-source electromagnetic and magnetotelluric data

    Science.gov (United States)

    Key, Kerry

    2016-10-01

    This work presents MARE2DEM, a freely available code for 2-D anisotropic inversion of magnetotelluric (MT) data and frequency-domain controlled-source electromagnetic (CSEM) data from onshore and offshore surveys. MARE2DEM parametrizes the inverse model using a grid of arbitrarily shaped polygons, where unstructured triangular or quadrilateral grids are typically used due to their ease of construction. Unstructured grids provide significantly more geometric flexibility and parameter efficiency than the structured rectangular grids commonly used by most other inversion codes. Transmitter and receiver components located on topographic slopes can be tilted parallel to the boundary so that the simulated electromagnetic fields accurately reproduce the real survey geometry. The forward solution is implemented with a goal-oriented adaptive finite-element method that automatically generates and refines unstructured triangular element grids that conform to the inversion parameter grid, ensuring accurate responses as the model conductivity changes. This dual-grid approach is significantly more efficient than the conventional use of a single grid for both the forward and inverse meshes since the more detailed finite-element meshes required for accurate responses do not increase the memory requirements of the inverse problem. Forward solutions are computed in parallel with a highly efficient scaling by partitioning the data into smaller independent modeling tasks consisting of subsets of the input frequencies, transmitters and receivers. Non-linear inversion is carried out with a new Occam inversion approach that requires fewer forward calls. Dense matrix operations are optimized for memory and parallel scalability using the ScaLAPACK parallel library. Free parameters can be bounded using a new non-linear transformation that leaves the transformed parameters nearly the same as the original parameters within the bounds, thereby reducing non-linear smoothing effects. Data

  14. Illustrations to “Gespräche in dem Reiche derer Todten zwischen dem vortreflichen Moscowitischen Czaar Petro Magno und dem grossen Tyrannen Ivan Basilowiz II” (Peter the Great and Ivan the Terrible by David Fassmann (1725

    Directory of Open Access Journals (Sweden)

    Ekaterina A. Skvortcova

    2017-12-01

    Full Text Available The journal created by David Fassmann (1683–1744, Gespräche in dem Reiche derer Todten, edited in Leipzig, was a huge success. Each of the 240 issues presents a dialogue between two historical figures from the afterworld. In the 83rd–86th Entrevuë, the interlocutors are Peter the Great and Ivan the Terrible. The texts of the four conversations were thoroughly examined by Eckhard Matthes (1987. The present paper explores how the illustrations to the 83rd–86th Entrevuë visualize the texts, which is significant as they were an important instrument for disseminating certain notions about Russia. While the illustration to the first dialogue of the suite juxtaposes Peter and Ivan, the illustration to the second one emphasizes the similarities between them. So the image of the “tyrant” and “barbarian” Ivan becomes a reference point with which a reader is urged to compare Peter’s deeds, seeing not only the differences but also the similarities. This greatly contributes to the creation of the multifaceted image of Russia of the early 18th century. The characters of the second illustration—a tiger and an executioner—can be identified as Ivan and Peter only if the reader takes into consideration an epigram to the illustration, the illustration to the previous dialogue, the text of the next Entrevuë, and facts about the execution of the strel’tsy known from other texts and images, about which Fassmann remains silent in the spirit of ars dissimulandi, which was typical for baroque culture. The paper offers an attempt to trace the iconography of the tyrant as a tiger. In the frontispiece to the 85th Entrevuë, a secretary bringing news from the world of the living and a portrait of Catherine I emphasize the connection of the past and the present, i.e., history and policy. Finally, the illustration to the last dialogue of the series returns to the glorification of Peter the Great declared in the first dialogue.

  15. Bestimmung der Mas'se des neutralen Bs-Mesons mit dem ALEPH-Experiment

    CERN Document Server

    Stehle, M

    2001-01-01

    Gegenstand der vorliegenden Arbeit ist die Bestimmung der Masse des neutralen Bs-Mesons. Dazu wurden B~-Mesonen in den beiden Zerfallskanalen B~ -+ J/W P und B~ -+ W(2S) P rekonstruiert, wobei die Subresonanzen in den Zerfallsmoden J /w -+ l+ l-, W(2S) -+ l+ l- und P -+ K+ K- untersucht wurden. Diese beiden Kanale werden auf Grund ihrer eindeutigen Signatur auch als "goldene Kanale" bezeichnet und eignen sich deshalb sehr gut fur eine exklusive Rekonstruktion, wie sie hier angewendet wurde. Grundlage der Analyse waren ca. 4 Millionen hadronische ZO-Zerfalle, die in den Jahren 1991 1995 mit dem ALEPH-Detektor am e+e--Speicherring LEP am CERN aufgezeichnet wurden. Die zwischenzeitliche Reprozessierung der Daten ermoglichte eine prazisere und effizientere Rekonstruktion als das in fruheren Messungen der Fall war. Wegen der niedrigen Verzweigungsverhaltnisse der untersuchten Zerfallsmoden wurden nur wenige einzelne Ereignisse in den Daten erwartet. Die selektierten Kandidaten wurden durch Schnitte in mehreren Ere...

  16. Robust 3D Quantification of Glacial Landforms: A Use of Idealised Drumlins in a Real DEM

    Science.gov (United States)

    Hillier, J. K.; Smith, M. S.

    2012-04-01

    Drumlins' attributes, such as height (h) and volume (V ), may preserve important information about the dynamics of former ice sheets. However, measurement errors are large (e.g., 39.2% of V within ±25% of their real values for the 'cookie cutter') and, in general, poorly understood. To accurately quantify the morphology of glacial landforms, the relief belonging to that landform must be reliably isolated from other components of the landscape (e.g. buildings, hills). A number of techniques have been proposed for this regional-residual separation (RRS). Which is best? Justifications for those applied remain qualitative assertions. A recently developed, novel method using idealised drumlins of known size (hin, V in) in a real digital elevation model (DEM) is used to quantitatively determine the best RRS technique, allowing general guidelines for quantifying glacial landforms to be proposed. 184 drumlins with digitised outlines in western Central Scotland are used as a case study. The NEXTMap surface model (DSM) is the primary dataset employed. A variety of techniques are then investigated for their ability to recover sizes (hr, V r). A metric, ɛ, is used that maximises the number of Hr/Hin values near 1.0 whilst giving equal weight to different drumlin sizes: a metric dominated by the large number of small drumlins is not desirable. For simplicity, the semi-automated 'cookie cutter' technique is used as a baseline for comparison. This removes heights within a drumlin from a DEM, cuts a hole, then estimates its basal surface by interpolating across the space with a fully tensioned bi-cubic spline (-T1). Metrics for h and V are ɛh = 0.885 and ɛV = 0.247. Other tensions do not improve this significantly, with ɛV of 0.245 at best, but using Delauney triangulation reduces ɛV to 0.206. Windowed 'sliding median' filters, which do not require heights within drumlins to be removed, attain a minimum ɛV of 0.470 at a best width of 340 m (-Fm340). Finally, even crudely

  17. Combined DFT and DEMS investigation of the effect of dopants in secondary zinc‐air batteries

    DEFF Research Database (Denmark)

    Lysgaard, Steen; Christensen, Mathias K.; Hansen, Heine A.

    2018-01-01

    Zinc‐air batteries offer the potential of low cost energy storage with high energy density, but at present secondary batteries suffer from poor cyclability. To develop secondary Zn‐air batteries, several challenges need to be overcome: choking of the cathode, catalyzing the oxygen evolution...... and reduction reactions, limiting dendrite formation and the hydrogen evolution reaction (HER). Understanding and alleviating HER at the anode is a challenge, where it is necessary to involve computational as well as experimental research. Here, we combine Differential Electrochemical Mass Spectrometry (DEMS......) and density functional theory calculations to investigate the fundamental role and stability over cycling of possible additives such as In, Bi and Ag. We show that both In and Bi have the desired property for a secondary battery that upon recharging, they will remain in the surface, thereby retaining...

  18. Revealing topographic lineaments through IHS enhancement of DEM data. [Digital Elevation Model

    Science.gov (United States)

    Murdock, Gary

    1990-01-01

    Intensity-hue-saturation (IHS) processing of slope (dip), aspect (dip direction), and elevation to reveal subtle topographic lineaments which may not be obvious in the unprocessed data are used to enhance digital elevation model (DEM) data from northwestern Nevada. This IHS method of lineament identification was applied to a mosiac of 12 square degrees using a Cray Y-MP8/864. Square arrays from 3 x 3 to 31 x 31 points were tested as well as several different slope enhancements. When relatively few points are used to fit the plane, lineaments of various lengths are observed and a mechanism for lineament classification is described. An area encompassing the gold deposits of the Carlin trend and including the Rain in the southeast to Midas in the northwest is investigated in greater detail. The orientation and density of lineaments may be determined on the gently sloping pediment surface as well as in the more steeply sloping ranges.

  19. FEM-DEM coupling simulations of the tool wear characteristics in prestressed machining superalloy

    Directory of Open Access Journals (Sweden)

    Ruitao Peng

    2016-01-01

    Full Text Available Due to the complicated contact loading at the tool-chip interface, ceramic tool wear in prestressed machining superalloy is rare difficult to evaluate only by experimental approaches. This study aims to develop a methodology to predict the tool wear evolution by using combined FEM and DEM numerical simulations. Firstly, a finite element model for prestressed cutting is established, subsequently a discrete element model to describe the tool-chip behaviour is established based on the obtained boundary conditions by FEM simulations, finally, simulated results are experimentally validated. The predicted tool wear results show nice agreement with experiments, the simulation indicates that, within a certain range, higher cutting speed effectively results in slighter wear of Sialon ceramic tools, and deeper depth of cut leads to more serious tool wear.

  20. Untersuchung der Produktion charmhaltiger Mesonen in der Photon-Photon-Streuung mit dem OPAL-Experiment

    CERN Document Server

    Patt, Jochen

    2001-01-01

    Die Produktion von Charm-Quarks in der Photon-Photon-Streuung wird ueber den Nachweis charmhaltiger Mesonen untersucht. Die Arbeit basiert auf den Daten, die mit dem OPAL-Detektor am Elektron-Positron-Speicherring LEP am CERN in Genf in den Jahren von 1989 bis 1998 aufgenommen worden sind. Anhand des Charmonium-Zustandes Chi(c2) wird die Resonanzproduktion von Charm-Quarks untersucht und die Zwei-Photon-Breite des Chi(c2)-Mesons wird gemessen. Geladene D*-Mesonen werden zur Untersuchung der offenen Produktion von Charm-Quarks benutzt. Der Anteil des direkten und des einfach-aufgeloesten Produktionsmechanismus, differentielle D*-Wirkungsquerschnitte, der totale Charm-Wirkungsquerschnitt sowie die Charm-Strukturfunktion des Photons werden bestimmt.

  1. DEM-CFD simulation of purge gas flow in a solid breeder pebble bed

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Hao [School of Nuclear Science and Technology, University of Science and Technology of China, Hefei 230027 (China); Institute of Nuclear Physics and Chemistry, China Academy of Engineering Physics, Mianyang 621900 (China); Li, Zhenghong [Institute of Nuclear Physics and Chemistry, China Academy of Engineering Physics, Mianyang 621900 (China); University of Science and Technology of China, Hefei 230027 (China); Guo, Haibing [Institute of Nuclear Physics and Chemistry, China Academy of Engineering Physics, Mianyang 621900 (China); Ye, Minyou [School of Nuclear Science and Technology, University of Science and Technology of China, Hefei 230027 (China); Huang, Hongwen, E-mail: inpclane@sina.com [Institute of Nuclear Physics and Chemistry, China Academy of Engineering Physics, Mianyang 621900 (China)

    2016-12-15

    Solid tritium breeding blanket applying pebble bed concept is promising for fusion reactors. Tritium bred in the pebble bed is purged out by inert gas. The flow characteristics of the purge gas are important for the tritium transport from the solid breeder materials. In this study, a randomly packed pebble bed was generated by Discrete Element Method (DEM) and verified by radial porosity distribution. The flow parameters of the purge gas in channels were solved by Computational Fluid Dynamics (CFD) method. The results show that the normalized velocity magnitudes have the same damped oscillating patterns with radial porosity distribution. Besides, the bypass flow near the wall cannot be ignored in this model, and it has a slight increase with inlet velocity. Furthermore, higher purging efficiency becomes with higher inlet velocity and especially higher in near wall region.

  2. Cerebellar volume in patients with dementia Volume cerebelar em pacientes com demência

    Directory of Open Access Journals (Sweden)

    Leonardo Baldaçara

    2011-01-01

    Mental e do Questionário de Atividades Funcionais. Os sujeitos foram divididos em cinco grupos de acordo com a Escala de Gravidade da Demência. Vinte e seis indivíduos do grupo original que não tinham o diagnóstico de demência no início do estudo foram reavaliados após dois anos para detectar o desenvolvimento da doença. RESULTADOS: Os volumes dos hemisférios cerebelares, lobo cerebelar posterior, vermis e lobo temporal estavam diminuídos proporcionalmente à gravidade da doença. Houve correlações positivas e significativas entre o Questionário de Atividades Funcionais, Mini Exame do Estado Mental e seus respectivos subtestes para linguagem e atenção com os volumes do lobo temporal e cerebelar. A análise de regressão logística demonstrou que o volume reduzido do lobo temporal, lobo cerebelar posterior e vermis pode ser um fator de risco para o futuro desenvolvimento de demência. CONCLUSÃO: Este é o primeiro estudo que demonstrou que o volume do cerebelo pode estar reduzido na fase pré-demência e reforça o papel dessa estrutura na progressão da doença de Alzheimer. Considerando que o cerebelo pode não estar diretamente associado com a origem da doença de Alzheimer, este achado tem valor para o prognóstico.

  3. Cerebellar volume in patients with dementia Volume cerebelar em pacientes com demência

    Directory of Open Access Journals (Sweden)

    Leonardo Baldaçara

    2011-06-01

    Mental e do Questionário de Atividades Funcionais. Os sujeitos foram divididos em cinco grupos de acordo com a Escala de Gravidade da Demência. Vinte e seis indivíduos do grupo original que não tinham o diagnóstico de demência no início do estudo foram reavaliados após dois anos para detectar o desenvolvimento da doença. RESULTADOS: Os volumes dos hemisférios cerebelares, lobo cerebelar posterior, vermis e lobo temporal estavam diminuídos proporcionalmente à gravidade da doença. Houve correlações positivas e significativas entre o Questionário de Atividades Funcionais, Mini Exame do Estado Mental e seus respectivos subtestes para linguagem e atenção com os volumes dos lobos temporal e cerebelar. A análise de regressão logística demonstrou que o volume reduzido do lobo temporal, lobo cerebelar posterior e vermis pode ser um fator de risco para o futuro desenvolvimento de demência. CONCLUSÃO: Este é o primeiro estudo que demonstrou que o volume do cerebelo pode estar reduzido na fase pré-demência e reforça o papel dessa estrutura na progressão da doença de Alzheimer. Considerando que o cerebelo pode não estar diretamente associado com a origem da doença de Alzheimer, este achado tem valor para o prognóstico.

  4. Coupled DEM-CFD analyses of landslide-induced debris flows

    CERN Document Server

    Zhao, Tao

    2017-01-01

    This book reflects the latest research results in computer modelling of landslide-induced debris flows. The book establishes an understanding of the initiation and propagation mechanisms of landslides by means of numerical simulations, so that mitigation strategies to reduce the long-term losses from landslide hazards can be devised. In this context, the book employs the Discrete Element Method (DEM) and Computational Fluid Dynamics (CFD) to investigate the mechanical and hydraulic behaviour of granular materials involved in landslides – an approach that yields meaningful insights into the flow mechanisms, concerning e.g. the mobilization of sediments, the generation and dissipation of excess pore water pressures, and the evolution of effective stresses. As such, the book provides valuable information, useful methods and robust numerical tools that can be successfully applied in the field of debris flow research.

  5. DEM4-26, Least Square Fit for IBM PC by Deming Method

    International Nuclear Information System (INIS)

    Rinard, P.M.; Bosler, G.E.

    1989-01-01

    1 - Description of program or function: DEM4-26 is a generalized least square fitting program based on Deming's method. Functions built into the program for fitting include linear, quadratic, cubic, power, Howard's, exponential, and Gaussian; others can easily be added. The program has the following capabilities: (1) entry, editing, and saving of data; (2) fitting of any of the built-in functions or of a user-supplied function; (3) plotting the data and fitted function on the display screen, with error limits if requested, and with the option of copying the plot to the printer; (4) interpolation of x or y values from the fitted curve with error estimates based on error limits selected by the user; and (5) plotting the residuals between the y data values and the fitted curve, with the option copying the plot to the printer. 2 - Method of solution: Deming's method

  6. Anwendung der extrakorporalen Stoßwellentherapie bei kalzifizierender Periathropathia humeroscapularis, Fersensporn und Epicondylitis humeri - Erfahrungsbericht aus dem Wilhelminenspital

    Directory of Open Access Journals (Sweden)

    Feyertag J

    2004-01-01

    Full Text Available Die Stoßwellentherapie wird bei verschiedenen Indikationen, die unter konservativen Therapien schwer zu schwer zu behandeln sind, eingesetzt. Dazu zählen die kalzifizierenden Schultererkrankungen (Tendinitis calcarea, Epicondylitis humeri (EHR und die plantare Fasciitis mit/ohne plantarem Fersensporn (FSP. Berichtet werden die Ergebnisse von 147 Patienten (102 Frauen/45 Männer, mittleres Alter betrug 57,8 Jahre, die mittels einer einmaligen extrakorporalen Stoßwellentherapie (ESWT (Tend. calc. 82 %, FSP 11 % oder EHR 7 % mittels eines HMT-ReflecTron therapiert wurden. Verabreicht wurden im Mittel 1.800 Stoßwellen. Untersucht wurde die subjektive Verbesserung der Schmerzen anhand einer visuellen Analogskala vor und 6 Wochen nach der Therapie bei allen Patienten. Bei Patienten mit Tendinitis calcarea wurde auch eine Verbesserung der Funktion sowie Veränderungen der Kalzifizierungen untersucht. Bei allen Patienten konnte eine statistisch signifikante Verbesserung der Schmerzen sowie des Bewegungsumfanges beobachtet werden (p 0,0001. Röntgenaufnahmen ergaben eine partielle Verkleinerung der Kalkdepots bei ca. 80 % der Patienten. Aufgrund der geringen Zahl der Patienten fand sich für die EHR keine signifikante Verbesserung der Schmerzsymptomatik. Eine einmalige ESWT kann zu einer deutlichen Verbesserung der Schmerzsymptomatik und zu einer Verbesserung des Bewegungsumfanges führen. Bei 80 % der Patienten mit einer Tendinitis calcarea findet sich weiter eine partielle Verkleinerung der Kalkdepots 6 Wochen nach Therapie.

  7. Evaluating the Quality and Accuracy of TanDEM-X Digital Elevation Models at Archaeological Sites in the Cilician Plain, Turkey

    Directory of Open Access Journals (Sweden)

    Stefan Erasmi

    2014-10-01

    Full Text Available Satellite remote sensing provides a powerful instrument for mapping and monitoring traces of historical settlements and infrastructure, not only in distant areas and crisis regions. It helps archaeologists to embed their findings from field surveys into the broader context of the landscape. With the start of the TanDEM-X mission, spatially explicit 3D-information is available to researchers at an unprecedented resolution worldwide. We examined different experimental TanDEM-X digital elevation models (DEM that were processed from two different imaging modes (Stripmap/High Resolution Spotlight using the operational alternating bistatic acquisition mode. The quality and accuracy of the experimental DEM products was compared to other available DEM products and a high precision archaeological field survey. The results indicate the potential of TanDEM-X Stripmap (SM data for mapping surface elements at regional scale. For the alluvial plain of Cilicia, a suspected palaeochannel could be reconstructed. At the local scale, DEM products from TanDEM-X High Resolution Spotlight (HS mode were processed at 2 m spatial resolution using a merge of two monostatic/bistatic interferograms. The absolute and relative vertical accuracy of the outcome meet the specification of high resolution elevation data (HRE standards from the National System for Geospatial Intelligence (NSG at the HRE20 level.

  8. Quantitative Analysis of Accuracy of Voidage Computations in CFD-DEM Simulations

    Directory of Open Access Journals (Sweden)

    H. A. Khawaja

    2012-06-01

    Full Text Available CFD-DEM (Computational Fluid Dynamics – Discrete Element Modelling is a two-phase flow numerical modelling technique, where the Eulerian method is used for the fluid and the Lagrangian method for the particles. The two phases are coupled by a fluid-particle interaction force (i.e. drag force which is computed using a correlation. In a two-phase flow, one critical parameter is the voidage (or void fraction, which is defined as the ratio of the volume occupied by the fluid to the total volume. In a CFD-DEM simulation the local voidage is computed by calculating the volume of particles in a given fluid cell. For spherical particles, this computation is difficult when a particle is on the boundary of fluid cells. In this case, it is usual to compute the volume of a particle in a fluid cell approximately. One such approximation divides the volume of a particle into each cell in the same ratio as an equivalent cube of width equal to the particle diameter. Whilst this approach is computationally straight forward, the approximation introduces an error in the voidage computation. Here we estimate the error by comparing the approximate volume calculation with an exact (numerical computation of the volume of a particle in a fluid cell. The results show that the error varies with the position of the particle relative to the cell boundary. A new approach is suggested which limits the error to less than 2.5 %, without significantly increasing the computational complexity.

  9. Comparison Between 2D and 3D Simulations of Rate Dependent Friction Using DEM

    Science.gov (United States)

    Wang, C.; Elsworth, D.

    2017-12-01

    Rate-state dependent constitutive laws of frictional evolution have been successful in representing many of the first- and second- order components of earthquake rupture. Although this constitutive law has been successfully applied in numerical models, difficulty remains in efficient implementation of this constitutive law in computationally-expensive granular mechanics simulations using discrete element methods (DEM). This study introduces a novel approach in implementing a rate-dependent constitutive relation of contact friction into DEM. This is essentially an implementation of a slip-weakening constitutive law onto local particle contacts without sacrificing computational efficiency. This implementation allows the analysis of slip stability of simulated fault gouge materials. Velocity-stepping experiments are reported on both uniform and textured distributions of quartz and talc as 3D analogs of gouge mixtures. Distinct local slip stability parameters (a-b) are assigned to the quartz and talc, respectively. We separately vary talc content from 0 to 100% in the uniform mixtures and talc layer thickness from 1 to 20 particles in the textured mixtures. Applied shear displacements are cycled through velocities of 1μm/s and 10μm/s. Frictional evolution data are collected and compared to 2D simulation results. We show that dimensionality significantly impacts the evolution of friction. 3D simulation results are more representative of laboratory observed behavior and numerical noise is shown at a magnitude of 0.01 in terms of friction coefficient. Stability parameters (a-b) can be straightforwardly obtained from analyzing velocity steps, and are different from locally assigned (a-b) values. Sensitivity studies on normal stress, shear velocity, particle size, local (a-b) values, and characteristic slip distance (Dc) show that the implementation is sensitive to local (a-b) values and relations between (Dc) and particle size.

  10. A robust method of thin plate spline and its application to DEM construction

    Science.gov (United States)

    Chen, Chuanfa; Li, Yanyan

    2012-11-01

    In order to avoid the ill-conditioning problem of thin plate spline (TPS), the orthogonal least squares (OLS) method was introduced, and a modified OLS (MOLS) was developed. The MOLS of TPS (TPS-M) can not only select significant points, termed knots, from large and dense sampling data sets, but also easily compute the weights of the knots in terms of back-substitution. For interpolating large sampling points, we developed a local TPS-M, where some neighbor sampling points around the point being estimated are selected for computation. Numerical tests indicate that irrespective of sampling noise level, the average performance of TPS-M can advantage with smoothing TPS. Under the same simulation accuracy, the computational time of TPS-M decreases with the increase of the number of sampling points. The smooth fitting results on lidar-derived noise data indicate that TPS-M has an obvious smoothing effect, which is on par with smoothing TPS. The example of constructing a series of large scale DEMs, located in Shandong province, China, was employed to comparatively analyze the estimation accuracies of the two versions of TPS and the classical interpolation methods including inverse distance weighting (IDW), ordinary kriging (OK) and universal kriging with the second-order drift function (UK). Results show that regardless of sampling interval and spatial resolution, TPS-M is more accurate than the classical interpolation methods, except for the smoothing TPS at the finest sampling interval of 20 m, and the two versions of kriging at the spatial resolution of 15 m. In conclusion, TPS-M, which avoids the ill-conditioning problem, is considered as a robust method for DEM construction.

  11. Exploring the Potential of TanDEM-X Data in Rice Monitoring

    Science.gov (United States)

    Erten, E.

    2015-12-01

    In this work, phenological parameters such as growth stage, calendar estimation, crop density and yield estimation for rice fields are estimated employing TanDEM-X data. Currently, crop monitoring is country-dependent. Most countries have databases based on cadastral information and annual farmer inputs. Inaccuracies are coming from wrong or missing farmer declarations and/or coarsely updated cadastral boundary definitions. This leads to inefficient regulation of the market, frauds as well as to ecological risks. An accurate crop calendar is also missing, since farmers provide estimations in advance and there is no efficient way to know the growth status over large plantations. SAR data is of particular interest for these purposes. The proposed method includes two step approach including field detection and phenological state estimation. In the context of precise farming it is substantial to define field borders which are usually changing every cultivation period. Linking the SAR inherit properties to transplanting practice such as irrigation, the spatial database of rice-planted agricultural crops can be updated. Boundaries of agricultural fields will be defined in the database, and assignments of crops and sowing dates will be continuously updated by our monitoring system considering that sowing practice variously changes depending on the field owner decision. To define and segment rice crops, the system will make use of the fact that rice fields are characterized as flooded parcels separated by path networks composed by soil or rare grass. This natural segmentation is well detectable by inspecting low amplitude and coherence values of bistatic acquisitions. Once the field borders are defined, the phenology estimation of crops monitored at any time is the key point of monitoring. In this aspect the wavelength and the polarization option of TanDEM-X are enough to characterize the small phenological changes. The combination of bistatic interferometry and Radiative

  12. Application of Digital Elevation Model (DEM for description of soil microtopography changes in laboratory experiments

    Directory of Open Access Journals (Sweden)

    Stańczyk Tomasz

    2016-12-01

    Full Text Available In the study we evaluated spatial and quantitative changes in soil surface microtopography to describe water erosion process under simulated rain with use of a non-contact optical 3D scanner. The experiment was conducted in two variants: with and without drainage layer. Two clay soils collected from farmlands from the catchment of lake Zgorzała (Warsaw were investigated. Six tests of simulated rain were applied, with 55 mm·h−1. The surface roughness and microrelief were determined immediately after every 10 min of rainfall simulation by 3D scanner. The volume of surface and underground runoff as well as soil moisture were measured. The surface points coordinates obtained while scanning were interpolated using natural neighbour method and GIS software to generate Digital Elevation Models (DEM with a 0.5 mm resolution. Two DEM-derived surface roughness indices: Random Roughness (RR and Terrain Ruggedness Index (TRI were used for microrelief description. Calculated values of both roughness factors have decreased with time under the influence of rainfall in all analyzed variants. During the sprinkling the moisture of all samples had been growing rapidly from air-dry state reaching values close to the maximum water capacity (37–48% vol. in 20–30 min. Simultaneously the intensity of surface runoff was increasing and cumulative runoff value was: 17–35% for variants with drainage and 72–83% for the variants without drainage, relative to cumulative rainfall. The observed soil surface elevation changes were associated with aggregates decomposition, erosion and sedimentation, and above all, with a compaction of the soil, which was considered to be a dominant factor hindering the assessment of the erosion intensity of the of the scanned surface.

  13. Radiologic assessment of the outcome of Keller and Brandes arthroplasty for hallux rigidus; Hallux rigidus operiert nach Keller und Brandes: Radiologische Erfolgs- und Prognoseparameter

    Energy Technology Data Exchange (ETDEWEB)

    Breitenseher, M.J. [Abt. fuer Osteologie, Universitaetsklinik fueer Radiodiagnostik und Besondere Klinische Einrichtung Magnet Resonanz, Wien (Austria)]|[Ludwig-Boltzmann-Institut fuer Radiologische Tumordiagnostik, Wien (Austria); Toma, C.D. [Universitaetsklinik fuer Orthopaedie, Wien (Austria); Gottsauner-Wolf, F. [Universitaetsklinik fuer Orthopaedie, Wien (Austria); Imhof, H. [Abt. fuer Osteologie, Universitaetsklinik fueer Radiodiagnostik und Besondere Klinische Einrichtung Magnet Resonanz, Wien (Austria)]|[Ludwig-Boltzmann-Institut fuer Radiologische Tumordiagnostik, Wien (Austria)

    1996-06-01

    The aim of this study was to evaluate the pre- and postoperative radiographic findings of hallux rigidus treated with Keller and Brandes arthroplasty to determine the radiographic outcome and to identify a prognostic marker. 83 patients with a total of 121 cases of hallux rigidus operated using Keller and Brandes arthroplasty were followed up (mean 9.7 y). A comparison of the pre- and postoperative radiographs, the clinical and subjective findings was predicated on a five point scale: 1. Percentage of proximal phalanx resected (<33%, 33-50%, >50%), 2. joint space, 3. ratio of the length of the first and second metatarsals, 4. first intermetatarsal angle, and 5. hallux valgus angle. In the patient group which had 33-50% of the proximal phalanx excised (n=67. 55%) the highest patient satisfaction was observed (96%). If resection of the proximal phalanx exceeded 50% (n=13. 11%), non physiologic dorsiflexion of the toe occurred and patients were unsatisfied (62%). Excision of less than 33% of the hallux (n=41. 34%) was associated with a recurrent hallux rigidus. No other evaluated radiological parameter proved to be of significance. The most important radiological parameter in the evaluation of the outcome of Keller and Brandes arthroplasty as the percentage of the proximal phalanx which had ben excised. (orig.) [Deutsch] Ziel der Studie war es, auf prae- und postoperativen Roentgenbildern des Hallux rigidus radiologische Parameter zu ermitteln, die den Erfolg der Arthroplastik nach Keller und Brandes abschaetzen und von prognostischer Relevanz sind. 121 Hallux-rigidus-Operationen bei 83 Patienten wurden nachuntersucht (9,7 a). 5 Kriterien wurden an den prae- und postoperativen Roentgenbildern ausgewertet: 1. Anteil der Grosszehengrundgliedresektion in Prozent (<33%, 33-50%, >50%), 2. Gelenkspaltbreite, 3. Laengenverhaeltnis von erstem und zweitem Metartasalknochen, 4. erster Intermetatarsalwinkel und 5. Hallux-valgus-Winkel und mit den klinischen Ergebnissen

  14. Zur Durchführbarkeit eines regelmäßigen Trainings mit der Nintendo Wii Fit Plus bei Frauen nach der Schwangerschaft

    Directory of Open Access Journals (Sweden)

    Nitzsche N

    2011-01-01

    Full Text Available Sport im Sinne eines regelmäßigen körperlichen Trainings sollte aus gesundheitlichen Gründen nach einer Schwangerschaft empfohlen werden. Jedoch müssen an diese Aktivitäten besondere Ansprüche gestellt werden. Die Beanspruchung sollte moderat und mit geringem Risiko sein. Weiters muss die körperliche Aktivität in den Tagesablauf einer jungen Mutter integrierbar sein. Hierzu könnten digitale Spiele mit Ganzkörperaktivitäten sinnvoll eingesetzt werden. Ziel dieser Trainingsstudie war es, möglichen Einsatz und mögliche Wirkung ausgewählter Übungen der Nintendo Wii Fit Plus bei postnatalen Frauen zu überprüfen. Dabei wurden subjektive Eindrücke wie das Spielerleben und wahrgenommene Beanspruchung erhoben. Die Wirkung auf die aerobe Ausdauerleistungsfähigkeit wurde durch eine 6-wöchige Intervention überprüft. An der Studie nahmen 8 Probandinnen (Alter 29,0 ± 4,6 Jahre, Größe 1,7 ± 0,1 m, Body-Mass-Index [BMI] 25,1 ± 3,1 kg/m², postnatal 6,3 ± 1,9 Wochen teil. Ergebnisse: Die Probandinnen zeigten nach einmaligem Spielen eine hohe bis sehr hohe Motivation, dieses Spiel noch mal zu spielen. Es wurde als nicht stressig mit mittlerer Spielgeschwindigkeit bei einfacher und übersichtlicher Bedienung bewertet. Über den Beobachtungszeitraum nahmen die Frauen eine moderate (etwas anstrengende Beanspruchung mit hohem Spaßempfinden wahr. Signifikante Gewichtsreduktionen sowie eine Verbesserung der aeroben Leistungsfähigkeit konnten nicht festgestellt werden. Schlussfolgernd bleibt festzuhalten, dass trotz nicht-signifikanter metabolischer und morphologischer Adaptionen eine hohe Motivation zu erwarten ist, was unter gegebenen Übungsvariationen der Nindento Wii Fit Plus zu regelmäßigem Training führen kann. Da diese Studie nur Pilotcharakter hatte, wäre unter randomisierten kontrollierten Bedingungen eine Untersuchung mit größerem Probandenumfang durchzuführen.

  15. EXTRACTING PRECISE AND AFFORDABLE DEMS DESPITE OF THE CLOUDS. AJAX: THE JOINING OF RADAR AND OPTICAL STRENGTHS

    Directory of Open Access Journals (Sweden)

    1 L. Cunin

    2012-07-01

    The DEMs extracted from TerraSAR-X and HRS proved extremely consistent with each other, showing a mean difference of 0.80m. This allows to propose a unified Elevation30 product to the users, with a guaranteed accuracy materialized into the product through a dedicated vertical Accuracy Commitment Mask.

  16. Relationship between oculomotor scanning determined by the DEM test and a contextual reading test in schoolchildren with reading difficulties.

    Science.gov (United States)

    Palomo-Alvarez, Catalina; Puell, María C

    2009-09-01

    The relationship between oculomotor scanning and reading in poor readers of primary school age is not well known. This study was designed to assess this relationship by determining mean Developmental Eye Movement (DEM) test times and reading speeds in a Spanish non-clinical population of children with poor reading skills but without dyslexia. We conducted a cross-sectional study on 81 poor readers (8-11 years of age) in the third to fifth grades recruited from 11 elementary schools in Madrid, Spain. In each subject with best spectacle correction, oculomotor scanning was measured using the DEM test, and reading speed (words per minute) was assessed by a standardized Spanish contextual reading test. Mean horizontal DEM times were higher than normative values for children in the third, fourth and fifth grades, by 20 seconds, 12 seconds, and 3 seconds respectively. Mean reading speeds were 18 words per minute lower than the norm for the third and fourth grades respectively, and 30 words per minute lower than the norm for the fifth grade. Reading speeds were significantly related to horizontal DEM times (r = -0.53, p school children at an early stage.

  17. Briefe aus dem Morgenland - Otto Friedrich von Richters Forschungsreise in den Jahren 1814-1816 / Vladimir Sazonov

    Index Scriptorium Estoniae

    Sazonov, Vladimir, 1979-

    2013-01-01

    Arvustus: Briefe aus dem Morgenland - Otto Friedrich von Richters Forschungsreise in den Jahren 1814-1816, hrsg. von Indrek Jürjo, Sergei Stadnikov, Hamburger Beiträge zur Geschichte des östlichen Europa, Bd. 20. Hamburg: Verlag Dr. Kovač 2013, 313 lk.

  18. Assessment of neuro-optometric rehabilitation using the Developmental Eye Movement (DEM test in adults with acquired brain injury

    Directory of Open Access Journals (Sweden)

    Neera Kapoor

    2018-04-01

    Full Text Available Purpose: This pilot study sought to determine the efficacy of using the Developmental Eye Movement (DEM test in the adult, acquired brain injury (ABI population to quantify clinically the effects of controlled, laboratory-performed, oculomotor-based vision therapy/vision rehabilitation. Methods: Nine adult subjects with mild traumatic brain injury (mTBI and five with stroke were assessed before and after an eight-week, computer-based, versional oculomotor (fixation, saccades, pursuit, and simulated reading training program (9.6 h total. The protocol incorporated a cross-over, interventional design with and without the addition of auditory feedback regarding two-dimensional eye position. The clinical outcome measure was the Developmental Eye Movement (DEM test score (ratio, errors taken before, midway, and immediately following training. Results: For the DEM ratio parameter, improvements were found in 80–89% of the subjects. For the DEM error parameter, improvements were found in 100% of the subjects. Incorporation of the auditory feedback component revealed a trend toward enhanced performance. The findings were similar for both DEM parameters, as well as for incorporation of the auditory feedback, in both diagnostic groups. Discussion: The results of the present study demonstrated considerable improvements in the DEM test scores following the oculomotor-based training, thus reflecting more time-optimal and accurate saccadic tracking after the training. The DEM test should be considered as another clinical test of global saccadic tracking performance in the ABI population. Resumen: Objetivo: Este estudio piloto trató de determinar la eficacia del uso de la prueba DEM (Developmental Eye Movement en la población adulta con daño cerebral adquirido (DCA para cuantificar clínicamente los efectos de la rehabilitación/terapia visual controlada, realizada en laboratorio, y de carácter oculomotor. Métodos: Se valoraron nueve sujetos adultos con

  19. DEM Development from Ground-Based LiDAR Data: A Method to Remove Non-Surface Objects

    Directory of Open Access Journals (Sweden)

    Maneesh Sharma

    2010-11-01

    Full Text Available Topography and land cover characteristics can have significant effects on infiltration, runoff, and erosion processes on watersheds. The ability to model the timing and routing of surface water and erosion is affected by the resolution of the digital elevation model (DEM. High resolution ground-based Light Detecting and Ranging (LiDAR technology can be used to collect detailed topographic and land cover characteristic data. In this study, a method was developed to remove vegetation from ground-based LiDAR data to create high resolution DEMs. Research was conducted on intensively studied rainfall–runoff plots on the USDA-ARS Walnut Gulch Experimental Watershed in Southeast Arizona. LiDAR data were used to generate 1 cm resolution digital surface models (DSM for 5 plots. DSMs created directly from LiDAR data contain non-surface objects such as vegetation cover. A vegetation removal method was developed which used a slope threshold and a focal mean filter method to remove vegetation and create bare earth DEMs. The method was validated on a synthetic plot, where rocks and vegetation were added incrementally. Results of the validation showed a vertical error of ±7.5 mm in the final DEM.

  20. Numerical Investigation of Simultaneously Deposition and Re-Entrainment Fouling Processes in Corrugated Tubes by Coupling CFD and DEM

    DEFF Research Database (Denmark)

    Hærvig, Jakob; Condra, Thomas Joseph; Sørensen, Kim

    Computational Fluid Dynamics (CFD) software OpenFOAM is coupled to the Discrete Element Method (DEM) software LIGGGHTS using the coupling software CFDEM. A four-way coupling is used to model fluid-particle and particle-particle interactions and thereby allowing for a particle fouling layer to build up along...

  1. Improving low-relief coastal LiDAR DEMs with hydro-conditioning of fine-scale and artificial drainages

    Directory of Open Access Journals (Sweden)

    Thomas Richard Allen

    2015-11-01

    Full Text Available Improvements in Light Detection and Ranging (LiDAR technology and spatial analysis of high-resolution digital elevation models (DEMs have advanced the accuracy and diversity of applications for coastal hazards and natural resources management. This article presents a concise synthesis of LiDAR analysis for coastal flooding and management applications in low-relief coastal plains and a case study demonstration of a new, efficient drainage mapping algorithm. The impetus for these LiDAR applications follows historic flooding from Hurricane Floyd in 1999, after which the State of North Carolina and the Federal Emergency Management Agency undertook extensive LiDAR data acquisition and technological developments for high-resolution floodplain mapping. An efficient algorithm is outlined for hydro-conditioning bare earth LiDAR DEMs using available US Geological Survey National Hydrography Dataset canal and ditch vectors. The methodology is illustrated in Moyock, North Carolina, for refinement of hydro-conditioning by combines pre-existing bare earth DEMs with spatial analysis of LiDAR point clouds in segmented and buffered ditch and canal networks. The methodology produces improved maps of fine-scale drainage, reduced omission of areal flood inundation, and subwatershed delineations that typify heavily ditched and canalled drainage areas. These preliminary results illustrate the capability of the technique to improve the representation of ditches in DEMs as well as subsequent flow and inundation modeling that could spur further research on low-relief coastal LiDAR applications.

  2. Investigation of Drag Force on Fibres of Bonded Spherical Elements using a Coupled CFD-DEM Approach

    DEFF Research Database (Denmark)

    Jensen, Anna Lyhne; Sørensen, Henrik; Rosendahl, Lasse Aistrup

    2016-01-01

    Clogging in wastewater pumps is often caused by flexible, stringy objects. Therefore, simulation of clogging effects in wastewater pumps entails simulation of such flexible objects and the interaction between these objects and fluid in the pump. Using a coupled CFD-DEM approach, the flexible obje...

  3. BOREAS HYP-8 DEM Data Over The NSA-MSA and SSA-MSA in The AEAC Projection

    Science.gov (United States)

    Knapp, David E.; Hall, Forrest G. (Editor); Wang, Xue-Wen; Band, L. E.; Smith, David E. (Technical Monitor)

    2000-01-01

    These data were derived from the original Digital Elevation Models (DEMs) produced by the Boreal Ecosystem-Atmosphere Study (BOREAS) Hydrology (HYD)-8 team. The original DEMs were in the Universal Transverse Mercator (UTM) projection, while this product is projected in the Albers Equal-Area Conic (AEAC) projection. The pixel size of the data is 100 meters, which is appropriate for the 1:50,000-scale contours from which the DEMs were made. The original data were compiled from information available in the 1970s and 1980s. This data set covers the two Modeling Sub-Areas (MSAs) that are contained within the Southern Study Area (SSA) and the Northern Study Area (NSA). The data are stored in binary, image format files. The DEM data over the NSA-MSA and SSA-MSA in the AEAC projection are available from the Earth Observing System Data and Information System (EOSDIS) Oak Ridge National Laboratory (ORNL) Distributed Active Archive Center (DAAC). The data files are available on a CD-ROM (see document number 20010000884).

  4. Das Doppelgesicht der Nichterwerbstätigkeit: Opportunitätsbilanz und Situationsdefinition als Determinanten der Zufriedenheit mit der Nichterwerbstätigkeit in einer Kohorte ehemaliger Gymnasiasten zwischen dem 30. und 43. Lebensjahr

    OpenAIRE

    Meulemann, Heiner; Hellwig, Jörg Otto

    2001-01-01

    'Dass unterschiedliche Definitionen dergleichen Situation zu unterschiedlichen Konsequenzen führen, wird an der Frage untersucht, ob die Tatsache und die Definition der Nichterwerbstätigkeit die Zufriedenheit mit ihr bei Kontrolle der Opportunität und des Geschlechts beeinflussen. Nach der Opportunitätsbilanzhypothese sollten Opportunitätsverluste die Zufriedenheit senken und Opportunitätsgewinne steigern; nach der Situationsdefinitionshypothese sollten positive Definitionen die Zufriedenheit...

  5. High-accuracy single-pass InSAR DEM for large-scale flood hazard applications

    Science.gov (United States)

    Schumann, G.; Faherty, D.; Moller, D.

    2017-12-01

    In this study, we used a unique opportunity of the GLISTIN-A (NASA airborne mission designed to characterizing the cryosphere) track to Greenland to acquire a high-resolution InSAR DEM of a large area in the Red River of the North Basin (north of Grand Forks, ND, USA), which is a very flood-vulnerable valley, particularly in spring time due to increased soil moisture content near state of saturation and/or, typical for this region, snowmelt. Having an InSAR DEM that meets flood inundation modeling and mapping requirements comparable to LiDAR, would demonstrate great application potential of new radar technology for national agencies with an operational flood forecasting mandate and also local state governments active in flood event prediction, disaster response and mitigation. Specifically, we derived a bare-earth DEM in SAR geometry by first removing the inherent far range bias related to airborne operation, which at the more typical large-scale DEM resolution of 30 m has a sensor accuracy of plus or minus 2.5 cm. Subsequently, an intelligent classifier based on informed relationships between InSAR height, intensity and correlation was used to distinguish between bare-earth, roads or embankments, buildings and tall vegetation in order to facilitate the creation of a bare-earth DEM that would meet the requirements for accurate floodplain inundation mapping. Using state-of-the-art LiDAR terrain data, we demonstrate that capability by achieving a root mean squared error of approximately 25 cm and further illustrating its applicability to flood modeling.

  6. Supplement Analysis for the Watershed Management Program EIS (DOE/EIS-0265/SA-90) - Naches River Water Treatment Plant Intake Screening Project

    Energy Technology Data Exchange (ETDEWEB)

    Stewart, Shannon C. [Bonneville Power Administration (BPA), Portland, OR (United States)

    2002-09-26

    BPA is proposing to fund the upgrade of the intake structure for the City of Yakima’s Water Treatment Plant. The existing traveling water screen at the intake does not achieve the current fish screening criteria as defined by Washington State Law and as provided in guidance from the National Marine Fisheries Service. Permanent modifications to the intake system including installation of a fish screen and bypass system are necessary to eliminate mortality and take of ESA listed and non-listed salmonids, as well as resident fish at this location. This project will include: modifications to bypass the existing intake system; the construction of a new intake structure with approved fish screens; installation of a 48-inch diameter pipeline connecting the new intake to the existing intake structure; a reduced intake channel separating PacifiCorp Powerhouse return water/ Naches River water from the irrigation and Wapatox waste ditch return water; modifications to the auxiliary headgates; increased height on the upstream end of the channel wall; and a new outfall structure with plunge pool and upstream migrant barriers.

  7. Alar ligaments: radiological aspects in the diagnosis of patients with whiplash injuries; Stellenwert bildgebender Verfahren in der Diagnostik der Ligg. alaria nach Beschleunigungsverletzung der Halswirbelsaeule

    Energy Technology Data Exchange (ETDEWEB)

    Muhle, C. [Klinik fuer Nuklearmedizin, Christian-Albrechts-Univ. zu Kiel (Germany); Brossmann, J.; Biederer, J.; Jahnke, Th.; Grimm, J.; Heller, M. [Klinik fuer Diagnostische Radiologie, Christian-Albrechts-Univ. zu Kiel (Germany)

    2002-04-01

    Post-traumatic changes of the alar ligaments have been proposed to be the cause of chronic pain in patients after whiplash injury of the cervical spine. In addition to an asymmetric dens position, widening of the atlantodental distance to more than 12 mm can be an indirect sign of an alar ligament rupture. CT is recommended for detection of a avulsion fracture of the occipital condyle. Isolated ruptures of the alar ligaments are best visualized on MRI. In patients with chronic impairments after whiplash injuries changes of the alar ligaments on MRI must be differentiated from normal variants in healthy individuals. (orig.) [German] Posttraumatische Veraenderungen der Ligg. alaria werden als ursaechlich fuer chronische Beschwerden bei Patienten mit Beschleunigungsverletzungen der Halswirbelsaeule angesehen. Eine asymmetrische Densposition sowie eine Erweiterung der anterioren atlantoaxialen Distanz auf ueber 12 mm koennen auf konventionellen Roentgenaufnahmen ein indirektes Zeichen fuer das Vorliegen einer Fluegelbandverletzung sein. Die Computertomographie ist die Methode der Wahl zum Nachweis einer kondylaeren Ausrissfraktur des Lig. alare. Isolierte akute Bandverletzungen der Ligg. alaria sind hingegen in der MRT direkt nachweisbar. Bei Patienten mit chronischen Beschwerden nach Beschleunigungsverletzungen der Halswirbelsaeule muessen allerdings morphologische Auffaelligkeiten der Ligg. alaria im MRT von Normvarianten abgegrenzt werden. (orig.)

  8. Mycotic aneurysm of the superior mesenteric artery after septic embolism; Entwicklung eines mykotischen Aneurysmas der A. mesenterica superior nach septischer Embolie

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, F.; Dinkel, H.P. [Institut fuer Diagnostische Radiologie, Inselspital, Universitaetsklinik Bern (Switzerland)

    2002-07-01

    Mycotic aneurysms of the aorta and the visceral arteries are life-threatening diseases, due to potential rupture and organ or limb ischemia. They occur in endocarditis, immunodeficiency, bacteremia and fungemia, and have a poor prognosis.We report on a case of a 54-year-old male patient suffering from abdominal angina after mitral valve replacement for septic mycotic endocarditis. In presence of a mycotic-embolic occlusion of the left popliteal artery and multiple septic organ infarctions a mycotic aneurysm of the superior mesenteric artery was found in abdominal spiral-CT.Based on sequential spiral-CT examinations, this case demonstrates the development of a septic aneurysm of the superior mesenteric artery. (orig.) [German] Mykotische Aneurysmen der Aorta und ihrer Aeste stellen wegen Rupturgefahr und moeglicher Minderperfusion von Organen und Extremitaeten eine lebensgefaehrliche Erkrankung mit unguenstiger Prognose dar. Beguenstigende Faktoren sind geschwaechte Immunabwehr, Endokarditis, Bakteriaemie und Fungaemie.Wir berichten ueber einen 54-jaehrigen Patienten, der nach einem Mitralklappenersatz bei mykotischer Endokarditis zunehmende abdominelle Beschwerden im Sinne einer Angina abdominalis entwickelte. Die abdominelle Spiralcomputertomographie zeigte ein mykotisches Aneurysma der A. mesenterica superior. Daneben bestanden ein mykotischer Verschluss der linken A. poplitea und multiple septische Organinfarkte.Der Fall demonstriert anhand sequentieller Computertomographien eindrucksvoll die Entwicklung eines septischen Viszeralarterienaneurysmas. (orig.)

  9. Understanding the microscopic moisture migration in pore space using DEM simulation

    Directory of Open Access Journals (Sweden)

    Yuan Guo

    2015-04-01

    Full Text Available The deformation of soil skeleton and migration of pore fluid are the major factors relevant to the triggering of and damages by liquefaction. The influence of pore fluid migration during earthquake has been demonstrated from recent model experiments and field case studies. Most of the current liquefaction assessment models are based on testing of isotropic liquefiable materials. However the recent New Zealand earthquake shows much severer damages than those predicted by existing models. A fundamental cause has been contributed to the embedded layers of low permeability silts. The existence of these silt layers inhibits water migration under seismic loads, which accelerated liquefaction and caused a much larger settlement than that predicted by existing theories. This study intends to understand the process of moisture migration in the pore space of sand using discrete element method (DEM simulation. Simulations were conducted on consolidated undrained triaxial testing of sand where a cylinder sample of sand was built and subjected to a constant confining pressure and axial loading. The porosity distribution was monitored during the axial loading process. The spatial distribution of porosity change was determined, which had a direct relationship with the distribution of excess pore water pressure. The non-uniform distribution of excess pore water pressure causes moisture migration. From this, the migration of pore water during the loading process can be estimated. The results of DEM simulation show a few important observations: (1 External forces are mainly carried and transmitted by the particle chains of the soil sample; (2 Porosity distribution during loading is not uniform due to non-homogeneous soil fabric (i.e. the initial particle arrangement and existence of particle chains; (3 Excess pore water pressure develops differently at different loading stages. At the early stage of loading, zones with a high initial porosity feature higher

  10. CREATION OF A MULTIRESOLUTION AND MULTIACCURACY DTM: PROBLEMS AND SOLUTIONS FOR HELI-DEM CASE STUDY

    Directory of Open Access Journals (Sweden)

    L. Biagi

    2014-01-01

    Full Text Available The work is part of "HELI-DEM" (HELvetia-Italy Digital Elevation Model project, funded by the European Regional Development Fund within the Italy-Switzerland cooperation program. The aim of the project is the creation of a unique DTM for the alpine and subalpine area between Italy (Piedmont, Lombardy and Switzerland (Ticino and Grisons Cantons; at present, different DTMs, that are in different reference frames and have been obtained with different technologies, accuracies, and resolutions, have been acquired. The final DTM should be correctly georeferenced and produced validating and integrating the data that are available for the project. DTMs are fundamental in hydrogeological studies, especially in alpine areas where hydrogeological risks may exist. Moreover, when an event, like for example a landslide, happens at the border between countries, a unique and integrated DTM which covers the interest area is useful to analyze the scenario. In this sense, HELI-DEM project is helpful. To perform analyses along the borders between countries, transnational geographic information is needed: a transnational DTM can be obtained by merging regional low resolution DTMs. Moreover high resolution local DTMs should be used where they are available. To be merged, low and high resolution DTMs should be in the same three dimensional reference frame, should not present biases and should be consistent in the overlapping areas. Cross-validation between the different DTMs is therefore needed. Two different problems should be solved: the merging of regional, partly overlapping low and medium resolution DTMs into a unique low/medium resolution DTM and the merging with other local high resolution/high accuracy height data. This paper discusses the preliminary processing of the data for the fusion of low and high resolution DTMs in a study-case area within the Lombardy region: Valtellina valley. In this region the Lombardy regional low resolution DTM is available, with

  11. Fusion of space-borne multi-baseline and multi-frequency interferometric results based on extended Kalman filter to generate high quality DEMs

    Science.gov (United States)

    Zhang, Xiaojie; Zeng, Qiming; Jiao, Jian; Zhang, Jingfa

    2016-01-01

    Repeat-pass Interferometric Synthetic Aperture Radar (InSAR) is a technique that can be used to generate DEMs. But the accuracy of InSAR is greatly limited by geometrical distortions, atmospheric effect, and decorrelations, particularly in mountainous areas, such as western China where no high quality DEM has so far been accomplished. Since each of InSAR DEMs generated using data of different frequencies and baselines has their own advantages and disadvantages, it is therefore very potential to overcome some of the limitations of InSAR by fusing Multi-baseline and Multi-frequency Interferometric Results (MMIRs). This paper proposed a fusion method based on Extended Kalman Filter (EKF), which takes the InSAR-derived DEMs as states in prediction step and the flattened interferograms as observations in control step to generate the final fused DEM. Before the fusion, detection of layover and shadow regions, low-coherence regions and regions with large height error is carried out because MMIRs in these regions are believed to be unreliable and thereafter are excluded. The whole processing flow is tested with TerraSAR-X and Envisat ASAR datasets. Finally, the fused DEM is validated with ASTER GDEM and national standard DEM of China. The results demonstrate that the proposed method is effective even in low coherence areas.

  12. Recent developments in the electricity generation market in 2014; Aktuelle Entwicklungen auf dem Stromerzeugungsmarkt im Jahr 2014

    Energy Technology Data Exchange (ETDEWEB)

    Hofmann, Holger [Oppenhoff und Partner Rechtsanwaelte Steuerberater mbB, Koeln (Germany)

    2015-02-16

    Following up the report on the developments in the Electricity market from last year to this case this article shall give an overview of the current developments in 2014. The year 2014 was marked by the energy sector Program of the coalition agreement, which, under the three objectives of security of supply Affordability and environmental impact which has made clear Specifications for the production side in particular with regard to the final Nuclear Phase-out phase, the announced amendment of the EEG, system stability and also Fracking. The predominant theme in 2014 this was certainly the reform of the EEG and around it rambling topics on European level. Too much uncertainty with plant operators, investors and companies in German power generation market, has led in addition to the mentioned legislative package the revision of the EU environmental and energy aid guidelines, State aid procedure of the European Commission regarding the German promotion of electricity from renewable Energy and the process in the case of Aaland Vindkraft before the ECJ. The dynamics on the generation side, inter alia through the increased connection of decentralized generation plants, result in an increasing regulation in power generation. Finally a first bill for Fracking is published at the end of 2014. [German] Anknuepfend an den Bericht ueber die Entwicklungen auf dem Stromerzeugungsmarkt aus dem letzten Jahr soll dieser Beitrag einen Ueberblick ueber die aktuellen Entwicklungen in 2014 geben. Das Jahr 2014 war gepraegt von dem energiewirtschaftlichen Programm des Koalitionsvertrags, das unter dem Zieldreieck aus Versorgungssicherheit, Preisguenstigkeit und Umweltvertraeglichkeit klare Vorgaben fuer die Erzeugerseite vor allem mit Blick auf den endgueltigen Atomausstieg, die angekuendigte Novellierung des EEG, Systemstabilitaet und auch Fracking gemacht hat. Das vorherrschende Thema im Jahr 2014 war hierbei sicherlich die Reform des EEG sowie die sich darum rankenden Themen auf

  13. Experimental dem Extraction from Aster Stereo Pairs and 3d Registration Based on Icesat Laser Altimetry Data in Upstream Area of Lambert Glacier, Antarctica

    Science.gov (United States)

    Hai, G.; Xie, H.; Chen, J.; Chen, L.; Li, R.; Tong, X.

    2017-09-01

    DEM Extraction from ASTER stereo pairs and three-dimensional registration by reference to ICESat laser altimetry data are carried out in upstream area of Lambert Glacier, East Antarctica. Since the study area is located in inland of East Antarctica where few textures exist, registration between DEM and ICESat data is performed. Firstly, the ASTER DEM generation is based on rational function model (RFM) and the procedure includes: a) rational polynomial coefficient (RPC) computation from ASTER metadata, b) L1A image product de-noise and destriping, c) local histogram equalization and matching, d) artificial collection of tie points and bundle adjustment, and e) coarse-to-fine hierarchical matching of five levels and grid matching. The matching results are filtered semi-automatically. Hereafter, DEM is interpolated using spline method with ground points converted from matching points. Secondly, the generated ASTER DEM is registered to ICESat data in three-dimensional space after Least-squares rigid transformation using singular value decomposition (SVD). The process is stated as: a) correspondence selection of terrain feature points from ICESat and DEM profiles, b) rigid transformation of generated ASTER DEM using selected feature correspondences based on least squares technique. The registration shows a good result that the elevation difference between DEM and ICESat data is low with a mean value less than 2 meters and the standard deviation around 7 meters. This DEM is generated and specially registered in Antarctic typical region without obvious ground rock control points and serves as true terrain input for further radar altimetry simulation.

  14. Insight From the Statistics of Nothing: Estimating Limits of Change Detection Using Inferred No-Change Areas in DEM Difference Maps and Application to Landslide Hazard Studies

    Science.gov (United States)

    Haneberg, W. C.

    2017-12-01

    Remote characterization of new landslides or areas of ongoing movement using differences in high resolution digital elevation models (DEMs) created through time, for example before and after major rains or earthquakes, is an attractive proposition. In the case of large catastrophic landslides, changes may be apparent enough that simple subtraction suffices. In other cases, statistical noise can obscure landslide signatures and place practical limits on detection. In ideal cases on land, GPS surveys of representative areas at the time of DEM creation can quantify the inherent errors. In less-than-ideal terrestrial cases and virtually all submarine cases, it may be impractical or impossible to independently estimate the DEM errors. Examining DEM difference statistics for areas reasonably inferred to have no change, however, can provide insight into the limits of detectability. Data from inferred no-change areas of airborne LiDAR DEM difference maps of the 2014 Oso, Washington landslide and landslide-prone colluvium slopes along the Ohio River valley in northern Kentucky, show that DEM difference maps can have non-zero mean and slope dependent error components consistent with published studies of DEM errors. Statistical thresholds derived from DEM difference error and slope data can help to distinguish between DEM differences that are likely real—and which may indicate landsliding—from those that are likely spurious or irrelevant. This presentation describes and compares two different approaches, one based upon a heuristic assumption about the proportion of the study area likely covered by new landslides and another based upon the amount of change necessary to ensure difference at a specified level of probability.

  15. BRS Deméter: nova cultivar de cevada cervejeira irrigada para o Cerrado do Brasil Central BRS Deméter: new malting barley cultivar for irrigated Brazilian savanna

    Directory of Open Access Journals (Sweden)

    Renato Fernando Amabile

    2008-09-01

    Full Text Available BRS Deméter é uma cultivar de cevada dística (duas fileiras de grãos de ampla adaptação, sob irrigação, ao Cerrado do Brasil Central. Apresenta potencial produtivo de grãos acima de 5.000 kg ha-1, estabilidade de produção e alta qualidade industrial malte-cervejeira. A cultivar atende às demandas do produtor por rendimento competitivo e às da indústria malteira por alta qualidade cervejeira.BRS Deméter is a spring, two-rowed barley, widely adapted to irrigated areas of the savanna, in Central Brazil. It presents production stability and high malting quality, with yield potential above 5,000 kg ha-1. It fulfills both the farmer and malting industry expectations regarding competitive yield and brewing quality.

  16. Ein Mythos wird besichtigt. Le deuxième sexe von Simone de Beauvoir unter dem Mikroskop der Genderforschung

    Directory of Open Access Journals (Sweden)

    Lieselotte Steinbrügge

    2005-11-01

    Full Text Available Aus Anlass des 50jährigen Jubiläums der Erstausgabe von Das andere Geschlecht haben namhafte Wissenschaftlerinnen aus den Gebieten Philosophie, Biologie, Soziologie, Psychoanalyse, Geschichte und Literatur das fast tausendseitige Standardwerk des Feminismus einer akribischen Lektüre unterzogen und dabei versucht, jene Fragen zu rekonstruieren, auf die das Werk bei seinem Erscheinen im Jahr 1949 eine Antwort gab. Die zeitlos scheinende Formel von der Konstruiertheit weiblicher Identität sollte wieder in ihren ursprünglichen Entstehungszusammenhang gestellt, die Autorin aus der mythischen Ferne in die kritische Nähe gerückt werden. Diese kritischen Lektüren sind insgesamt gut dokumentiert und erlauben meines Wissens zum ersten Mal einen Einblick in die Beauvoirsche Werkstatt. Ein weiterer – ebenfalls von Ingrid Galster herausgegebener – Band dokumentiert die Reaktionen, die unmittelbar nach Erscheinen von Le deuxième sexe in der französischen Presse erschienen sind.

  17. Volcanic activity at Etna volcano, Sicily, Italy between June 2011 and March 2017 studied with TanDEM-X SAR interferometry

    Science.gov (United States)

    Kubanek, J.; Raible, B.; Westerhaus, M.; Heck, B.

    2017-12-01

    High-resolution and up-to-date topographic data are of high value in volcanology and can be used in a variety of applications such as volcanic flow modeling or hazard assessment. Furthermore, time-series of topographic data can provide valuable insights into the dynamics of an ongoing eruption. Differencing topographic data acquired at different times enables to derive areal coverage of lava, flow volumes, and lava extrusion rates, the most important parameters during ongoing eruptions for estimating hazard potential, yet most difficult to determine. Anyhow, topographic data acquisition and provision is a challenge. Very often, high-resolution data only exists within a small spatial extension, or the available data is already outdated when the final product is provided. This is especially true for very dynamic landscapes, such as volcanoes. The bistatic TanDEM-X radar satellite mission enables for the first time to generate up-to-date and high-resolution digital elevation models (DEMs) repeatedly using the interferometric phase. The repeated acquisition of TanDEM-X data facilitates the generation of a time-series of DEMs. Differencing DEMs generated from bistatic TanDEM-X data over time can contribute to monitor topographic changes at active volcanoes, and can help to estimate magmatic ascent rates. Here, we use the bistatic TanDEM-X data to investigate the activity of Etna volcano in Sicily, Italy. Etna's activity is characterized by lava fountains and lava flows with ash plumes from four major summit crater areas. Especially the newest crater, the New South East Crater (NSEC) that was formed in 2011 has been highly active in recent years. Over one hundred bistatic TanDEM-X data pairs were acquired between January 2011 and March 2017 in StripMap mode, covering episodes of lava fountaining and lava flow emplacement at Etna's NSEC and its surrounding area. Generating DEMs of every bistatic data pair enables us to assess areal extension of the lava flows, to

  18. DEM simulation of particle mixing for optimizing the overcoating drum in HTR fuel fabrication

    Science.gov (United States)

    Liu, Malin; Lu, Zhengming; Liu, Bing; Shao, Youlin

    2013-06-01

    The rotating drum was used for overcoating coated fuel particles in HTR fuel fabrication process. All the coated particles should be adhered to equal amount of graphite powder, which means that the particle should be mixed quickly in both radial and axial directions. This paper investigated the particle flow dynamics and mixing behavior in different regimes using the discrete element method (DEM). By varying the rotation speed, different flow regimes such as slumping, rolling, cascading, cataracting, centrifuging were produced. The mixing entropy based on radial and axial grid was introduced to describe the radial and axial mixing behaviors. From simulation results, it was found that the radial mixing can be achieved in the cascading regime more quickly than the slumping, rolling and centrifuging regimes, but the traditional rotating drum without internal components can not achieve the requirements of axial mixing and should be improved. Three different structures of internal components are proposed and simulated. The new V-shaped deflectors were found to achieve a quick axial mixing behavior and uniform axial distribution in the rotating drum based on simulation results. At last, the superiority was validated by experimental results, and the new V-shaped deflectors were used in the industrial production of the overcoating coated fuel particles in HTR fuel fabrication process.

  19. Investigating the Effects of Underplating at Raukumara Peninsula, New Zealand: Insights from DEM Modeling

    Science.gov (United States)

    Farrell, W. C.; Morgan, J.

    2017-12-01

    It is thought that subcretion and underplating are important processes at subduction zones worldwide. Despite its proposed common occurrence, the physical mechanisms controlling if underplating occurs and the rate of its associated uplift are poorly understood. Basic questions about the tectonic and geomechanical parameters governing subduction channel stability, subcretion, and the rate and shape of associated uplift have proven difficult to answer. In this study we employ the Discrete Element Method (DEM) to address these questions, using the Raukumara Peninsula of New Zealand as the real-world basis of many of our model inputs. Multiple geophysical datasets suggest that the Raukumara Peninsula is underlain by underplated sediments at Moho depths, and these may be responsible for anomalously high rates of uplift in the area. The combined geologic, geophysical, and geodetic data from the region serve to constrain model geometries and boundary conditions, allowing us to test the mechanisms for underplating and upper crustal response. The effects of surface processes and potential for shallow trenchward sliding are also investigated in the modeling effort.

  20. Particle–Mixing Simulations Using DEM and Comparison of the Performance of Mixing Indices

    International Nuclear Information System (INIS)

    Cho, Migyung

    2017-01-01

    Mixing of molecular grains having different characteristics is very important in many industries such as the food and pharmaceutical industries. With the development of computer simulations, it is common practice to find the optimal mixing conditions through a simulation before the actual mixing task to estimate the proper level of mixing. Accordingly, there has been an increasing need for a mixing index to measure the mix of particles in the simulation process. Mixing indices, which have been widely used so far, can largely be classified into two types: first is the statistical-based mixing index, which is prepared using the sampling method, and the second is the mixing index that is prepared using all the particles. In this paper, we calculated mixing indices in different ways for the data in the course of mixing the particles using the DEM simulation. Additionally, we compared the performance, advantages, and disadvantages of each mixing index. Therefore, I propose a standard that can be used to select an appropriate mixing index.

  1. Discrete element method (DEM) simulations of stratified sampling during solid dosage form manufacturing.

    Science.gov (United States)

    Hancock, Bruno C; Ketterhagen, William R

    2011-10-14

    Discrete element model (DEM) simulations of the discharge of powders from hoppers under gravity were analyzed to provide estimates of dosage form content uniformity during the manufacture of solid dosage forms (tablets and capsules). For a system that exhibits moderate segregation the effects of sample size, number, and location within the batch were determined. The various sampling approaches were compared to current best-practices for sampling described in the Product Quality Research Institute (PQRI) Blend Uniformity Working Group (BUWG) guidelines. Sampling uniformly across the discharge process gave the most accurate results with respect to identifying segregation trends. Sigmoidal sampling (as recommended in the PQRI BUWG guidelines) tended to overestimate potential segregation issues, whereas truncated sampling (common in industrial practice) tended to underestimate them. The size of the sample had a major effect on the absolute potency RSD. The number of sampling locations (10 vs. 20) had very little effect on the trends in the data, and the number of samples analyzed at each location (1 vs. 3 vs. 7) had only a small effect for the sampling conditions examined. The results of this work provide greater understanding of the effect of different sampling approaches on the measured content uniformity of real dosage forms, and can help to guide the choice of appropriate sampling protocols. Copyright © 2011 Elsevier B.V. All rights reserved.

  2. Blurring the boundary between rapid granular flow and dense granular flow regimes: Evidence from DEM simulations

    Science.gov (United States)

    Tripathi, Anurag; Prasad, Mahesh; Kumar, Puneet

    2017-11-01

    The saturation of the effective friction coefficient for granular flows at high inertial numbers has been assumed widely by researchers, despite little simulation/experimental evidence. In contrast, a recent simulation study of plane shear flows by Mandal and Khakhar, suggests that the effective friction coefficient becomes maximum and then starts to decrease with increase in the inertial number for I > 0.5 . In order to investigate whether such a dip at higher inertial numbers is indeed a feature of granular rheology, we perform DEM simulations of chute flow of highly inelastic disks. We show that steady, fully developed flows are possible at inclinations much higher than those normally reported in literature. At such high inclinations, the flow is characterised by a significant slip at the base; the height of the layer increases by more than 300 % and kinetic energy of the layer increases by nearly 5 orders of magnitude. We observe, for the first time, steady chute flows at inertial number I 2 and show that the dip at higher inertial numbers can be observed in case of chute flow as well. The predictions of modified μ - I rheology, however, seem to remain valid in the bulk of the layer for packing fractions as low as 0.2. AT acknowledges the funding obtained from IIT Kanpur through the initiation Grant for this study.

  3. Mapping Landslides in Lunar Impact Craters Using Chebyshev Polynomials and Dem's

    Science.gov (United States)

    Yordanov, V.; Scaioni, M.; Brunetti, M. T.; Melis, M. T.; Zinzi, A.; Giommi, P.

    2016-06-01

    Geological slope failure processes have been observed on the Moon surface for decades, nevertheless a detailed and exhaustive lunar landslide inventory has not been produced yet. For a preliminary survey, WAC images and DEM maps from LROC at 100 m/pixels have been exploited in combination with the criteria applied by Brunetti et al. (2015) to detect the landslides. These criteria are based on the visual analysis of optical images to recognize mass wasting features. In the literature, Chebyshev polynomials have been applied to interpolate crater cross-sections in order to obtain a parametric characterization useful for classification into different morphological shapes. Here a new implementation of Chebyshev polynomial approximation is proposed, taking into account some statistical testing of the results obtained during Least-squares estimation. The presence of landslides in lunar craters is then investigated by analyzing the absolute values off odd coefficients of estimated Chebyshev polynomials. A case study on the Cassini A crater has demonstrated the key-points of the proposed methodology and outlined the required future development to carry out.

  4. Effect of Nonsmooth Nose Surface of the Projectile on Penetration Using DEM Simulation

    Directory of Open Access Journals (Sweden)

    Jing Han

    2017-01-01

    Full Text Available The nonsmooth body surface of the reptile in nature plays an important role in reduction of resistance and friction when it lives in a soil environment. To consider whether it was feasible for improving the performance of penetrating projectile we investigated the influence of the convex as one of nonsmooth surfaces for the nose of projectile. A numerical simulation study of the projectile against the concrete target was developed based on the discrete element method (DEM. The results show that the convex nose surface of the projectile is beneficial for reducing the penetration resistance greatly, which is also validated by the experiments. Compared to the traditional smooth nose structure, the main reason of difference is due to the local contact normal pressure, which increases dramatically due to the abrupt change of curvature caused by the convex at the same condition. Accordingly, the broken particles of the concrete target obtain more kinetic energy and their average radial flow velocities will drastically increase simultaneously, which is in favor of decreasing the interface friction and the compaction density of concrete target around the nose of projectile.

  5. Modelling of Coke Layer Collapse during Ore Charging in Ironmaking Blast Furnace by DEM

    Science.gov (United States)

    Narita, Yoichi; Mio, Hiroshi; Orimoto, Takashi; Nomura, Seiji

    2017-06-01

    A technical issue in an ironmaking blast furnace operation is to realize the optimum layer thickness and the radial distribution of burden (ore and coke) to enhance its efficiency and productivity. When ore particles are charged onto the already-embedded coke layer, the coke layer-collapse phenomenon occurs. The coke layer-collapse phenomenon has a significant effect on the distribution of ore and coke layer thickness in the radial direction. In this paper, the mechanical properties of coke packed bed under ore charging were investigated by the impact-loading test and the large-scale direct shear test. Experimental results show that the coke particle is broken by the impact force of ore charging, and the particle breakage leads to weaken of coke-layer strength. The expression of contact force for coke in Discrete Element Method (DEM) was modified based on the measured data, and it followed by the 1/3-scaled experiment on coke's collapse phenomena. Comparing a simulation by modified model to the 1/3-scaled experiment, they agreed well in the burden distribution.

  6. Particle–Mixing Simulations Using DEM and Comparison of the Performance of Mixing Indices

    Energy Technology Data Exchange (ETDEWEB)

    Cho, Migyung [Tongmyong Univ., Busan (Korea, Republic of)

    2017-02-15

    Mixing of molecular grains having different characteristics is very important in many industries such as the food and pharmaceutical industries. With the development of computer simulations, it is common practice to find the optimal mixing conditions through a simulation before the actual mixing task to estimate the proper level of mixing. Accordingly, there has been an increasing need for a mixing index to measure the mix of particles in the simulation process. Mixing indices, which have been widely used so far, can largely be classified into two types: first is the statistical-based mixing index, which is prepared using the sampling method, and the second is the mixing index that is prepared using all the particles. In this paper, we calculated mixing indices in different ways for the data in the course of mixing the particles using the DEM simulation. Additionally, we compared the performance, advantages, and disadvantages of each mixing index. Therefore, I propose a standard that can be used to select an appropriate mixing index.

  7. Waste incineration on its way to the power plants; Muellverbrennung auf dem Weg zum Kraftwerk

    Energy Technology Data Exchange (ETDEWEB)

    Reich, J. [STEAG encotec GmbH, Essen (Germany); Neukirchen, B. [STEAG AG, Essen (Germany)

    2004-07-01

    Looking at the year 2005 and the end of disposal of untreated domestic waste the politic hopes that the prognosticated lack of waste treatment capacity is remedied by coal-fired power plants. The classical municipal waste incinerators by contrast want to get recognition as energetic recycler in comparison with power stations. The decision of the European Court of Justice concerning recycling and disposal of domestic waste by incineration has started the discussion and competition on fuel-rich commercial waste. Are municipal waste incineration plants power stations or must power plants be regarded as incinerators? These questions are still open. (orig.) [German] Mit Blick auf das Jahr 2005 und das Ende der Ablagerung von unbehandeltem Siedlungsabfall hofft die Politik, dass der prognostizierte Mangel an Vorbehandlungskapazitaeten von den Kohlekraftwerken behoben wird. Die klassischen Muellverbrennungsanlagen wollen dagegen mit dem Kraftwerksvergleich die Anerkennung als energetische Verwerter erreichen. Das EuGH-Urteil zur Verwertung oder Beseitigung von Siedlungsabfall durch Verbrennen hat in diesem Jahr die Diskussion und den Kampf um den heizwertreichen Gewerbeabfall angeheizt. Die Frage, wie weit in Zukunft die Muellverbrennungsanlagen als Kraftwerke, aber auch die Kraftwerke als Muellverbrennungsanlagen angesehen werden muessen, ist noch offen. (orig.)

  8. Landslide Change Detection Based on Multi-Temporal Airborne LiDAR-Derived DEMs

    Directory of Open Access Journals (Sweden)

    Omar E. Mora

    2018-01-01

    Full Text Available Remote sensing technologies have seen extraordinary improvements in both spatial resolution and accuracy recently. In particular, airborne laser scanning systems can now provide data for surface modeling with unprecedented resolution and accuracy, which can effectively support the detection of sub-meter surface features, vital for landslide mapping. Also, the easy repeatability of data acquisition offers the opportunity to monitor temporal surface changes, which are essential to identifying developing or active slides. Specific methods are needed to detect and map surface changes due to landslide activities. In this paper, we present a methodology that is based on fusing probabilistic change detection and landslide surface feature extraction utilizing multi-temporal Light Detection and Ranging (LiDAR derived Digital Elevation Models (DEMs to map surface changes demonstrating landslide activity. The proposed method was tested in an area with numerous slides ranging from 200 m2 to 27,000 m2 in area under low vegetation and tree cover, Zanesville, Ohio, USA. The surface changes observed are probabilistically evaluated to determine the likelihood of the changes being landslide activity related. Next, based on surface features, a Support Vector Machine (SVM quantifies and maps the topographic signatures of landslides in the entire area. Finally, these two processes are fused to detect landslide prone changes. The results demonstrate that 53 out of 80 inventory mapped landslides were identified using this method. Additionally, some areas that were not mapped in the inventory map displayed changes that are likely to be developing landslides.

  9. Extraction of Dems and Orthoimages from Archive Aerial Imagery to Support Project Planning in Civil Engineering

    Science.gov (United States)

    Cogliati, M.; Tonelli, E.; Battaglia, D.; Scaioni, M.

    2017-12-01

    Archive aerial photos represent a valuable heritage to provide information about land content and topography in the past years. Today, the availability of low-cost and open-source solutions for photogrammetric processing of close-range and drone images offers the chance to provide outputs such as DEM's and orthoimages in easy way. This paper is aimed at demonstrating somehow and to which level of accuracy digitized archive aerial photos may be used within a such kind of low-cost software (Agisoft Photoscan Professional®) to generate photogrammetric outputs. Different steps of the photogrammetric processing workflow are presented and discussed. The main conclusion is that this procedure may come to provide some final products, which however do not feature the high accuracy and resolution that may be obtained using high-end photogrammetric software packages specifically designed for aerial survey projects. In the last part a case study is presented about the use of four-epoch archive of aerial images to analyze the area where a tunnel has to be excavated.

  10. Case studies of heat conduction in rotary drums with L-shaped lifters via DEM

    Directory of Open Access Journals (Sweden)

    Qiang Xie

    2018-03-01

    Full Text Available Rotary drums are widely used in numerous processes in industry to handle granular materials. In present work, heat transfer processes in drums with L-shaped lifters have been investigated by coupling the discrete element method (DEM with heat transfer model. Effects of both operational and structural parameters have been analyzed. It is found that increasing rotational speed could improve heat transfer to a certain extent, however, just in relatively low speed stage. When lifter number increases, the heat transfer speed slightly decreases. An increasing lifter height could promote heat transfer first and then reduces it, but the amplitude of variation keeps small. The heat transfer rate descends with increasing lifter width. The heat transfer mechanisms have also been discussed by comparing mixing rates, total contact areas for thermal conduction, time constants (TC indicating apparent heat transfer rate and effective heat transfer coefficients(HTC. It is concluded that dynamic conduction due to particle flow is dominated in all cases. The L-shaped lifers are turned out not a good choice when heat conduction between particles is prominent.

  11. Transformation (normalization) of slope gradient and surface curvatures, automated for statistical analyses from DEMs

    Science.gov (United States)

    Csillik, O.; Evans, I. S.; Drăguţ, L.

    2015-03-01

    Automated procedures are developed to alleviate long tails in frequency distributions of morphometric variables. They minimize the skewness of slope gradient frequency distributions, and modify the kurtosis of profile and plan curvature distributions toward that of the Gaussian (normal) model. Box-Cox (for slope) and arctangent (for curvature) transformations are tested on nine digital elevation models (DEMs) of varying origin and resolution, and different landscapes, and shown to be effective. Resulting histograms are illustrated and show considerable improvements over those for previously recommended slope transformations (sine, square root of sine, and logarithm of tangent). Unlike previous approaches, the proposed method evaluates the frequency distribution of slope gradient values in a given area and applies the most appropriate transform if required. Sensitivity of the arctangent transformation is tested, showing that Gaussian-kurtosis transformations are acceptable also in terms of histogram shape. Cube root transformations of curvatures produced bimodal histograms. The transforms are applicable to morphometric variables and many others with skewed or long-tailed distributions. By avoiding long tails and outliers, they permit parametric statistics such as correlation, regression and principal component analyses to be applied, with greater confidence that requirements for linearity, additivity and even scatter of residuals (constancy of error variance) are likely to be met. It is suggested that such transformations should be routinely applied in all parametric analyses of long-tailed variables. Our Box-Cox and curvature automated transformations are based on a Python script, implemented as an easy-to-use script tool in ArcGIS.

  12. Probability- and curve-based fractal reconstruction on 2D DEM terrain profile

    International Nuclear Information System (INIS)

    Lai, F.-J.; Huang, Y.M.

    2009-01-01

    Data compression and reconstruction has been playing important roles in information science and engineering. As part of them, image compression and reconstruction that mainly deal with image data set reduction for storage or transmission and data set restoration with least loss is still a topic deserved a great deal of works to focus on. In this paper we propose a new scheme in comparison with the well-known Improved Douglas-Peucker (IDP) method to extract characteristic or feature points of two-dimensional digital elevation model (2D DEM) terrain profile to compress data set. As for reconstruction in use of fractal interpolation, we propose a probability-based method to speed up the fractal interpolation execution to a rate as high as triple or even ninefold of the regular. In addition, a curve-based method is proposed in the study to determine the vertical scaling factor that much affects the generation of the interpolated data points to significantly improve the reconstruction performance. Finally, an evaluation is made to show the advantage of employing the proposed new method to extract characteristic points associated with our novel fractal interpolation scheme.

  13. Biomass utilisation seen against the background of AGENDA 21; Biomassenutzung vor dem Hintergrund der AGENDA 21

    Energy Technology Data Exchange (ETDEWEB)

    Schoenwiesner-Bozkurt, C. [efreso AG, Muenchen (Germany)

    2000-07-01

    From 3 to 14 June 1992 Rio de Janeiro was host to the largest conference that had ever taken place up to that point in human history, the United Nations Conference on Environment and Development (UNCED). One major programmatic outcome of the conference was the approval of Agenda 21. This document was signed by 179 states, but it is not binding under international law. Altogether AGENDA 21 comprises 40 chapters. The present paper draws on a selection of these chapters to exemplify the significance of energy production from biomass and its relationship with the goals of Agenda 21. The author has refrained from discussing the issue of climate and energy policy in a wider context, as this matter will undoubtedly already be known to the reader. [German] Zwischen dem 03. und 14. Juni 1992 fand in Rio die bis dahin groesste Konferenz der Menschheitsgeschichte statt. Die Konferenz der Vereinten Nationen ueber Umwelt und Entwicklung 'United Nations Conference on Environment and Development (UNCED)'. Als greifbares programmatisches Ergebnis der Konferenz wurde am Ende die Agenda 21 verabschiedet. Sie wurde von 179 Staaten unterzeichnet, ist aber voelkerrechtlich nicht verbindlich. Insgesamt umfasst die Agenda 21 40 Einzelkapitel. Beispielhaft soll anhand einiger Kapitel die Bedeutung und der Zusammenhang zwischen der energetischen Nutzung der Biomasse und den Zielen der Agenda 21 aufgezeigt werden. Bewusst wird hierbei der Themenbereich 'Klima- und Energiepolitik' nicht weiter betrachtet, da dieser Zusammenhang den Teilnehmern sicherlich bekannt ist. (orig.)

  14. Methodological application so as to obtain digital elevation models DEM in wetland areas

    International Nuclear Information System (INIS)

    Quintero, Deiby A; Montoya V, Diana M; Betancur, Teresita

    2009-01-01

    In order to understand hydrological systems and the description of flow processes that occur among its components it is essential to have a physiographic description that morphometric and relief characteristics. When local studies are performed, the basic cartography available, in the best case 1:25,000 scale, tends not to obey the needs required to represent the water dynamics that characterize the interactions between streams, aquifers and lenticular water bodies in flat zones particularly in those where there are wetlands localized in ancient F100D plains of rivers. A lack of financial resources is the principal obstacle to acquiring; information that is current and sufficient for the scale of the project. Geomorphologic conditions of flat relief zones are a good alternative for the construction of the new data. Using the basic cartography available and the new data, it is possible to obtain DEMs that are improved and consistent with the dynamics of surface and groundwater flows in the hydrological system. To accomplish this one must use spatial modeling tools coupled with Geographic Information System - GIS. This article present a methodological application for the region surrounding the catchment of wetland Cienaga Colombia in the Bajo Cauca region of Antioquia.

  15. DEM simulation of undrained behaviour with preshearing history for saturated granular media

    International Nuclear Information System (INIS)

    Gong, Guobin; Zha, Xiaoxiong

    2013-01-01

    This paper presents the results of the three-dimensional (3D) discrete element method (DEM) simulations of undrained axisymmetric/triaxial tests on loose assemblies of polydisperse spheres with and without preshearing history using a periodic cell. Undrained tests are modelled by deforming the samples under constant volume conditions. The simulations show that the preshearing process will not induce initial structural anisotropy, and that the presheared and unpresheared samples follow the same initial stress path along a unique limiting boundary in the q–p space, as observed in the published experimental literature, which was not crossed over by any of the stress paths of the presheared samples. It is also shown that the presheared samples are denser compared with the original unpresheared one, and therefore exhibit higher resistance to (temporary) liquefaction. At the grain scale, such higher resistance is found to be attributed to the evolution of a redundancy factor, a microscopic definition of liquefaction (temporary liquefaction). The Lade instability (peak deviator stress) is found to correspond to a unique mechanical coordination number of 4.5, independent of preshearing history. It is also found that the onset of liquefaction (temporary liquefaction) in terms of the redundancy factor lags behind the onset of macroscopic strain softening in terms of the Lade instability for the presheared and unpresheared samples under undrained conditions. (paper)

  16. Automated Topographic Change Detection via Dem Differencing at Large Scales Using The Arcticdem Database

    Science.gov (United States)

    Candela, S. G.; Howat, I.; Noh, M. J.; Porter, C. C.; Morin, P. J.

    2016-12-01

    In the last decade, high resolution satellite imagery has become an increasingly accessible tool for geoscientists to quantify changes in the Arctic land surface due to geophysical, ecological and anthropomorphic processes. However, the trade off between spatial coverage and spatial-temporal resolution has limited detailed, process-level change detection over large (i.e. continental) scales. The ArcticDEM project utilized over 300,000 Worldview image pairs to produce a nearly 100% coverage elevation model (above 60°N) offering the first polar, high spatial - high resolution (2-8m by region) dataset, often with multiple repeats in areas of particular interest to geo-scientists. A dataset of this size (nearly 250 TB) offers endless new avenues of scientific inquiry, but quickly becomes unmanageable computationally and logistically for the computing resources available to the average scientist. Here we present TopoDiff, a framework for a generalized. automated workflow that requires minimal input from the end user about a study site, and utilizes cloud computing resources to provide a temporally sorted and differenced dataset, ready for geostatistical analysis. This hands-off approach allows the end user to focus on the science, without having to manage thousands of files, or petabytes of data. At the same time, TopoDiff provides a consistent and accurate workflow for image sorting, selection, and co-registration enabling cross-comparisons between research projects.

  17. Dewatering of sludge using the hydrosoft high-pressure process; Entwaessern von Schlaemmen mit dem Hydrosoft-Hochdruckverfahren

    Energy Technology Data Exchange (ETDEWEB)

    Eder, C.; Eder, G. [Christian Eder Technology GbR, Neunkirchen (Germany)

    1999-07-01

    The hydrosoft process permits to dewater sludge, especially also sludge from municipal sewage treatment plant, until it contains a high proportion of dry substance. For existing dewatering systems equipped with the long-lived chamber filter presses, too, the dry matter content of the filter cake can be substantially increased using the hydrosoft process; only the pump system must be retrofitted. As a preliminary measure, tests with mobile pilot plants should be carried out. (orig.) [German] Mit dem Hydrosoft-Verfahren besteht die Moeglichkeit Schlaemme, insbesondere auch Schlaemme aus kommunalen Klaeranlagen, auf hohe Trockensubstanz-Gehalte zu entwaessern. Auch bei bestehenden Entwaesserungsanlagen, die mit den langlebigen Kammerfilterpressen ausgeruestet sind, koennen die Trockensubstanzgehalte der Filterkuchen mit dem Hydrosoft-Verfahren, fuer das dann nur noch das Pumpsystem nachgeruestet werden muss, wesentlich angehoben werden. Vorausgehen sollten jeweils Vorversuche mit mobilen Versuchsanlagen. (orig.)

  18. Procedure for short-lived particle detection in the OPERA experiment and its application to charm decays

    Energy Technology Data Exchange (ETDEWEB)

    Agafonova, N.; Malgin, A.; Matveev, V.; Ryazhskaya, O.; Shakiryanova, I. [INR-Institute for Nuclear Research of the Russian Academy of Sciences, Moscow (Russian Federation); Aleksandrov, A.; Buontempo, S.; Consiglio, L.; Di Crescenzo, A.; Shchedrina, T.; Tioukov, V. [INFN Sezione di Napoli, Naples (Italy); Anokhina, A.; Dzhatdoev, T.; Podgrudkov, D.; Roganova, T.; Shoziyoev, G. [Lomonosov Moscow State University, SINP MSU-Skobeltsyn Institute of Nuclear Physics, Moscow (Russian Federation); Aoki, S.; Hara, T.; Ozaki, K.; Takahashi, S. [Kobe University, Kobe (Japan); Ariga, A.; Ariga, T.; Ereditato, A.; Kawada, J.; Kreslo, I.; Pistillo, C.; Strauss, T.; Tufanli, S.; Vuilleumier, J.L. [University of Bern, Albert Einstein Center for Fundamental Physics, Laboratory for High Energy Physics (LHEP), Bern (Switzerland); Bender, D.; Guler, M.; Kamiscioglu, C.; Kamiscioglu, M. [METU-Middle East Technical University, Ankara (Turkey); Bertolin, A.; Dusini, S.; Kose, U.; Stanco, L. [INFN Sezione di Padova, Padua (Italy); Bozza, C.; Grella, G.; Stellacci, S.M. [Dipartimento di Fisica dell' Universita di Salerno and ' ' Gruppo Collegato' ' INFN, Fisciano, Salerno (Italy); Brugnera, R.; Garfagnini, A.; Medinaceli, E.; Roda, M.; Sirignano, C. [INFN Sezione di Padova, Padua (Italy); Dipartimento di Fisica e Astronomia dell' Universita di Padova, Padua (Italy); Buonaura, A.; De Lellis, G.; Galati, G.; Hosseini, B.; Lauria, A.; Montesi, M.C.; Strolin, P. [Dipartimento di Fisica dell' Universita Federico II di Napoli, Naples (Italy); INFN Sezione di Napoli, Naples (Italy); Buettner, B.; Ebert, J.; Goellnitz, C.; Hagner, C.; Hollnagel, A.; Lenkeit, J.; Wonsak, B. [Hamburg University, Hamburg (Germany); Chernyavsky, M.; Okateva, N.; Polukhina, N.; Starkov, N.; Vladimirov, M. [LPI-Lebedev Physical Institute of the Russian Academy of Sciences, Moscow (Russian Federation); Chukanov, A.; Dmitrievski, S.; Gornushkin, Y.; Olshevsky, A.; Sheshukov, A.; Zemskova, S. [JINR-Joint Institute for Nuclear Research, Dubna (Russian Federation); D' Ambrosio, N.; Di Marco, N.; Pupilli, F.; Schembri, A. [INFN-Laboratori Nazionali del Gran Sasso, Assergi, L' Aquila (Italy); De Serio, M.; Muciaccia, M.T.; Simone, S. [Dipartimento di Fisica dell' Universita di Bari, Bari (Italy); INFN Sezione di Bari, Bari (Italy); Amo Sanchez, P. del; Duchesneau, D.; Pessard, H.; Zghiche, A. [LAPP, Universite de Savoie, CNRS/IN2P3, Annecy-le-Vieux (France); Di Ferdinando, D.; Mandrioli, G.; Patrizii, L.; Sirri, G.; Tenti, M. [INFN Sezione di Bologna, Bologna (Italy); Dracos, M.; Jollet, C.; Meregaglia, A. [IPHC, Universite de Strasbourg, CNRS/IN2P3, Strasbourg (France); Fini, R.A.; Pastore, A. [INFN Sezione di Bari, Bari (Italy); Fukuda, T.; Ishida, H.; Matsuo, T.; Ogawa, S.; Shibuya, H. [Toho University, Funabashi (Japan); Giacomelli, G. [INFN Sezione di Bologna, Bologna (Italy); Dipartimento di Fisica e Astronomia dell' Universita di Bologna, Bologna (Italy); Goldberg, J. [Technion, Department of Physics, Haifa (Israel); Gustavino, C.; Monacelli, P. [INFN Sezione di Roma, Rome (Italy); Ishiguro, K.; Kitagawa, N.; Komatsu, M.; Morishima, K.; Naganawa, N.; Naka, T.; Nakamura, M.; Nakano, T.; Nakatsuka, Y.; Niwa, K.; Omura, T.; Rokujo, H.; Sato, O.; Shiraishi, T. [Nagoya University, Nagoya (Japan); Jakovcic, K.; Klicek, B.; Ljubicic, A.; Malenica, M.; Stipcevic, M. [IRB-Rudjer Boskovic Institute, Zagreb (Croatia); Kim, J.H.; Park, I.G.; Yoon, C.S. [Gyeongsang National University, Jinju (Korea, Republic of); Kim, S.H. [Gyeongsang National University, Jinju (Korea, Republic of); Kyungpook National University, Daegu (Korea, Republic of); Kodama, K. [Aichi University of Education, Kariya, Aichi-Ken (Japan); Longhin, A.; Paoloni, A.; Spinetti, M.; Votano, L. [INFN-Laboratori Nazionali di Frascati dell' INFN, Frascati, Rome (Italy); Loverre, P.; Rosa, G. [INFN Sezione di Roma, Rome (Italy); Dipartimento di Fisica dell' Universita di Roma ' ' La Sapienza' ' , Rome (Italy); Mauri, N.; Pasqualini, L.; Pozzato, M.; Sioli, M. [INFN Sezione di Bologna, Bologna (Italy); Dipartimento di Fisica e Astronomia dell' Universita di Bologna, Bologna (Italy); Mikado, S. [Nihon University, Narashino, Chiba (Japan); Park, B.D. [Gyeongsang National University, Jinju (Korea, Republic of); Samsung Changwon Hospital, SKKU, Changwon (Korea, Republic of); Terranova, F. [INFN-Laboratori Nazionali di Frascati dell' INFN, Frascati, Rome (Italy); Dipartimento di Fisica dell' Universita di Milano-Bicocca, Milan (Italy); Vilain, P.; Wilquet, G. [IIHE, Universite Libre de Bruxelles, Brussels (Belgium)

    2014-08-15

    TheOPERAexperiment, designed to perform the first observation of ν{sub μ} → ν{sub τ} oscillations in appearance mode through the detection of the τ leptons produced in ν{sub τ} charged current interactions, has collected data from 2008 to 2012. In the present paper, the procedure developed to detect τ particle decays, occurring over distances of the order of 1mm from the neutrino interaction point, is described in detail and applied to the search for charmed hadrons, showing similar decay topologies as the τ lepton. In the analysed sample, 50 charm decay candidate events are observed while 54 ± 4 are expected, proving that the detector performance and the analysis chain applied to neutrino events are well reproduced by the OPERA simulation and thus validating the methods for ν{sub τ} appearance detection. (orig.)

  19. Dementia Population Risk Tool (DemPoRT): study protocol for a predictive algorithm assessing dementia risk in the community

    OpenAIRE

    Fisher, Stacey; Hsu, Amy; Mojaverian, Nassim; Taljaard, Monica; Huyer, Gregory; Manuel, Douglas G; Tanuseputro, Peter

    2017-01-01

    Introduction The burden of disease from dementia is a growing global concern as incidence increases dramatically with age, and average life expectancy has been increasing around the world. Planning for an ageing population requires reliable projections of dementia prevalence; however, existing population projections are simple and have poor predictive accuracy. The Dementia Population Risk Tool (DemPoRT) will predict incidence of dementia in the population setting using multivariable modellin...

  20. GIS-based debris flow source and runout susceptibility assessment from DEM data – a case study in NW Nicaragua

    Directory of Open Access Journals (Sweden)

    J. M. Vilaplana

    2007-11-01

    Full Text Available In October 1998, Hurricane Mitch triggered numerous landslides (mainly debris flows in Honduras and Nicaragua, resulting in a high death toll and in considerable damage to property. The potential application of relatively simple and affordable spatial prediction models for landslide hazard mapping in developing countries was studied. Our attention was focused on a region in NW Nicaragua, one of the most severely hit places during the Mitch event. A landslide map was obtained at 1:10 000 scale in a Geographic Information System (GIS environment from the interpretation of aerial photographs and detailed field work. In this map the terrain failure zones were distinguished from the areas within the reach of the mobilized materials. A Digital Elevation Model (DEM with 20 m×20 m of pixel size was also employed in the study area. A comparative analysis of the terrain failures caused by Hurricane Mitch and a selection of 4 terrain factors extracted from the DEM which, contributed to the terrain instability, was carried out. Land propensity to failure was determined with the aid of a bivariate analysis and GIS tools in a terrain failure susceptibility map. In order to estimate the areas that could be affected by the path or deposition of the mobilized materials, we considered the fact that under intense rainfall events debris flows tend to travel long distances following the maximum slope and merging with the drainage network. Using the TauDEM extension for ArcGIS software we generated automatically flow lines following the maximum slope in the DEM starting from the areas prone to failure in the terrain failure susceptibility map. The areas crossed by the flow lines from each terrain failure susceptibility class correspond to the runout susceptibility classes represented in a runout susceptibility map. The study of terrain failure and runout susceptibility enabled us to obtain a spatial prediction for landslides, which could contribute to landslide risk

  1. Uso de espectrometria de massas em medidas eletroquímicas - a técnica de DEMS

    Directory of Open Access Journals (Sweden)

    Souza José Pio I. de

    2000-01-01

    Full Text Available The combination of cyclic voltammetry and on line mass spectrometry, called differential electrochemical mass spectrometry (DEMS, is already a well established method for on line identification and quantitative detection of the products and intermediates of electrochemical reactions. This article aims to show the principles of the method and how this technique have been used to study electrochemical problems such the electrocatalytic oxidation of organic molecules, as methanol and ethanol, at noble metal electrodes.

  2. Precise Determination of the Baseline Between the TerraSAR-X and TanDEM-X Satellites

    Science.gov (United States)

    Koenig, Rolf; Rothacher, Markus; Michalak, Grzegorz; Moon, Yongjin

    TerraSAR-X, launched on June 15, 2007, and TanDEM-X, to be launched in September 2009, both carry the Tracking, Occultation and Ranging (TOR) category A payload instrument package. The TOR consists of a high-precision dual-frequency GPS receiver, called Integrated GPS Occultation Receiver (IGOR), for precise orbit determination and atmospheric sounding and a Laser retro-reflector (LRR) serving as target for the global Satellite Laser Ranging (SLR) ground station network. The TOR is supplied by the GeoForschungsZentrum Potsdam (GFZ) Germany, and the Center for Space Research (CSR), Austin, Texas. The objective of the German/US collaboration is twofold: provision of atmospheric profiles for use in numerical weather predictions and climate studies from the occultation data and precision SAR data processing based on precise orbits and atmospheric products. For the scientific objectives of the TanDEM- X mission, i.e., bi-static SAR together with TerraSAR-X, the dual-frequency GPS receiver is of vital importance for the millimeter level determination of the baseline or distance between the two spacecrafts. The paper discusses the feasibility of generating millimeter baselines by the example of GRACE, where for validation the distance between the two GRACE satellites is directly available from the micrometer-level intersatellite link measurements. The distance of the GRACE satellites is some 200 km, the distance of the TerraSAR-X/TanDEM-X formation will be some 200 meters. Therefore the proposed approach is then subject to a simulation of the foreseen TerraSAR-X/TanDEM-X formation. The effect of varying space environmental conditions, of possible phase center variations, multi path, and of varying center of mass of the spacecrafts are evaluated and discussed.

  3. To the question on accuracy of forest heights’ measurements by the TanDEM-X radar interferometry data

    Directory of Open Access Journals (Sweden)

    T. N. Chimitdorzhiev

    2016-08-01

    Full Text Available The paper presents the validation results of the InSAR method for determining the forest canopy height, based on TanDEM-X and ALOS PALSAR data. The research conducted on the territory of the Baikal-Kudara forest area of the Republic of Buryatia (52°10'N, 106°48'E. Forest vegetation is represented mainly by conifers – pine, and spruce, with a small admixture of deciduous trees – aspen, birch, etc. The forest vegetation height was determined by subtracting the digital elevation model (DEM of the digital terrain model (DTM. DEM is built according to the L-band (wavelength of 23.5 cm ALOS PALSAR satellite with horizontal co-polarization mode. In the investigation it was assumed that a radar signal of ALOS PALSAR passes all forest thickness and reflected from the underlying surface, made it possible to recover terrain under forest canopy. DTM has been built using the TanDEM-X data (wavelength 3 cm. In this case, it was assumed that the radar echoes scattered from a some virtual phase centers of scattering surface, which characterizes the upper limit of the continuous forest canopy. To check the accuracy of satellite definitions of forest height in study area were made high-precision geodetic measurement of trees heights using electronic total station and the coordinates of geographic control points using differential GPS receivers. The discrepancy between the satellite and ground-based measurements at 11 test sites did not exceed 2 m, which is mainly due to the difference in measurement techniques: height of individual trees by ground methods and continuous forest canopy height using radar interferometry.

  4. Extraction of multi-scale landslide morphological features based on local Gi* using airborne LiDAR-derived DEM

    Science.gov (United States)

    Shi, Wenzhong; Deng, Susu; Xu, Wenbing

    2018-02-01

    For automatic landslide detection, landslide morphological features should be quantitatively expressed and extracted. High-resolution Digital Elevation Models (DEMs) derived from airborne Light Detection and Ranging (LiDAR) data allow fine-scale morphological features to be extracted, but noise in DEMs influences morphological feature extraction, and the multi-scale nature of landslide features should be considered. This paper proposes a method to extract landslide morphological features characterized by homogeneous spatial patterns. Both profile and tangential curvature are utilized to quantify land surface morphology, and a local Gi* statistic is calculated for each cell to identify significant patterns of clustering of similar morphometric values. The method was tested on both synthetic surfaces simulating natural terrain and airborne LiDAR data acquired over an area dominated by shallow debris slides and flows. The test results of the synthetic data indicate that the concave and convex morphologies of the simulated terrain features at different scales and distinctness could be recognized using the proposed method, even when random noise was added to the synthetic data. In the test area, cells with large local Gi* values were extracted at a specified significance level from the profile and the tangential curvature image generated from the LiDAR-derived 1-m DEM. The morphologies of landslide main scarps, source areas and trails were clearly indicated, and the morphological features were represented by clusters of extracted cells. A comparison with the morphological feature extraction method based on curvature thresholds proved the proposed method's robustness to DEM noise. When verified against a landslide inventory, the morphological features of almost all recent (historical (> 10 years) landslides were extracted. This finding indicates that the proposed method can facilitate landslide detection, although the cell clusters extracted from curvature images should

  5. La revista Demófilo y la antropología cultural en Andalucía

    Directory of Open Access Journals (Sweden)

    Rodríguez Becerra, Salvador

    2002-06-01

    Full Text Available Published since 1987 by the Machado Foundation, of Seville, Demófilo represents the resumption of scientific folklore studies in the late 19th century championed by Antonio Machado y Álvarez and published in the journal El Folk-lore Andaluz. The basic objectives of Demófilo are «to rescue, analyze and divulge Andalousia's traditional culture.» The journal is oriented toward high schools, colleges and universities in Andalousia as well as any institution interested in the traditional culture of the area, such as museums and organizations supporting Andalousia's cultural heritage. The authors also include in this article a summary of the journal's monographic issues published to date.

    Publicación de la Fundación Machado, de Sevilla, y nacida en 1987, Demófilo enlaza con su predecesora en el siglo XIX, El Folk-lore Andaluz, del movimiento sevillano de estudio científico del folklore que animara sobre todo Antonio Machado y Álvarez. Demófilo tiene como objetivos básicos «rescatar, analizar y difundir la cultura tradicional andaluza» y va dirigida especialmente a centros de enseñanza media y universidades de Andalucía, así como a instituciones interesadas en la cultura tradicional de la región, como museos y asociaciones de defensa del patrimonio cultural. Los autores incluyen también en este artículo un resumen de los números monográficos de la revista publicados hasta la fecha.

  6. Accuracy assessment of TanDEM-X IDEM using airborne LiDAR on the area of Poland

    Directory of Open Access Journals (Sweden)

    Woroszkiewicz Małgorzata

    2017-06-01

    Full Text Available The TerraSAR-X add-on for Digital Elevation Measurement (TanDEM-X mission launched in 2010 is another programme – after the Shuttle Radar Topography Mission (SRTM in 2000 – that uses space-borne radar interferometry to build a global digital surface model. This article presents the accuracy assessment of the TanDEM-X intermediate Digital Elevation Model (IDEM provided by the German Aerospace Center (DLR under the project “Accuracy assessment of a Digital Elevation Model based on TanDEM-X data” for the southwestern territory of Poland. The study area included: open terrain, urban terrain and forested terrain. Based on a set of 17,498 reference points acquired by airborne laser scanning, the mean errors of average heights and standard deviations were calculated for areas with a terrain slope below 2 degrees, between 2 and 6 degrees and above 6 degrees. The absolute accuracy of the IDEM data for the analysed area, expressed as a root mean square error (Total RMSE, was 0.77 m.

  7. Ecotoxicological and human toxicological risk assessment of PAH-contaminated soils before and after biological treatment; Oekotoxikologische und humantoxikologische Risikobewertung PAK-belasteter Boeden vor und nach biologischer Behandlung

    Energy Technology Data Exchange (ETDEWEB)

    Roos, P.H.; Hanstein, W.G. [Bochum Univ. (Germany). Inst. fuer Physiologische Chemie; Weissenfels, W.D. [RAG Umwelt Kommunal GmbH, Bottrop (Germany); Afferden, M. van [IMTA, Jiutepec, Mor. (Mexico); Pfeifer, F. [DMT-Gesellschaft fuer Forschung und Pruefung mbH, Essen (Germany)

    2000-07-01

    The goal of the present work is to assess the adverse effects of soil bound polycyclic aromatic hydrocarbons (PAH) which remain in soils after biological remediation. We focus on risk assessment for mammalian species with respect to the oral uptake of contaminated soil particles and compare the results of a biomarker test with those of an ecotoxicological assay, the bioluminescence inhibition test with Vibrio fischeri. As a biomarker effect in mammals, we determined the liver microsomal cytochrome P450 enzyme CYP1A1 which is induced by PAH in exposed rats. After biological soil treatment, different amounts of PAH remain in the soil depending on the soil properties and initial pollutant composition. Particularly, higher condensated PAH resists biological treatment due to its hydrophobicity. In addition, high amounts of organic carbon in the soils affect remediation efficiency. In the bioluminescence inhibition test, eluates of all biologically treated soils studied do not reveal any or only low inhibitory effects. In contrast, the oral uptake of biologically treated contaminated soils leads to induction levels for CYP1A1 similar to those in the untreated samples. A good correlation is obtained between CYP1A1 levels and the amount of 5 and 6-ring PAH in the soil samples. The main result is that the remediation efficiency determined by the luminescence test is not reflected by the biomarker test, a finding which indicates the high bioavailability of residual PAH in soils. Consequently, new criteria for human risk assessment can be delineated. (orig.) [German] Ziel dieser Arbeit ist es, moegliche toxische Wirkungen PAK-belasteter Boeden vor und nach biologischer Sanierung zu erfassen. Hierbei liegt der Schwerpunkt auf der Abschaetzung des Risikos fuer Saeugetiere nach oraler Aufnahme von Bodenpartikeln. Als Biomarker-Effekt fuer die PAK-Aufnahme haben wir in Ratten die Induktion des lebermikrosomalen P450-Enzyms CYP1A1 bestimmt, dessen Expression durch PAK moduliert

  8. 3D-Druck von Metallen als Substitution und Wettbewerb von Gussteilen?: Vortrag gehalten auf dem 26. Ledebur-Kolloquium, 27. und 28. Oktober 2016, Freiberg

    OpenAIRE

    Müller, Bernhard

    2016-01-01

    Das Fraunhofer-Institut für Werkzeugmaschinen und Umformtechnik IWU ist kompetenter Partner für anwendungsorientierte Forschung im Automobil- und Maschinenbau an den Standorten Chemnitz, Dresden, Zittau unter dem Leitthema „Ressourceneffiziente Produktion“. Die Kernkompetenzen des Instituts in der Werkzeugmaschinenentwicklung, der Umform- und Zerspanungstechnik, der Mechatronik, dem Funktionsleichtbau sowie der Systemtechnologie werden durch den Einsatz generativer Fertigungs-verfahren ergänz...

  9. Uma revisão bibliográfica das principais demências que acometem a população brasileira

    Directory of Open Access Journals (Sweden)

    Claudia Lysia de O. Araújo

    2011-01-01

    Full Text Available Demência pode ser definida como uma síndrome caracterizada pelo declínio progressivo e global de memória e outras funções cognitivas. O presente trabalho é uma revisão bibliográfica que tem como objetivo identificar e apresentar a produção científica relacionada com a temática. O levantamento bibliográfico foi nas Bases de Dados da Biblioteca Virtual de Saúde - BIREME. Os tipos de demência aqui levadas em conta são: Demência de Alzheimer, Demência por Corpos de Lewy (DCL, Demência Frontotemporal (DFT e Demência Vascular. Nas demências, os fatores de risco variam de acordo com os estressores genéticos e ambientais, além da idade e histórico clínico, conforme cada indivíduo. As principais alterações cerebrais são: placas senis e emaranhados neurofibrilares, com comprometimento da neurotransmissão colinérgica e atrofia cerebral extensa. Na sua maior parte são patologias de início insidioso e deterioração progressiva. O primeiro sinal/sintoma é a perda da memória seguida de declínio cognitivo e funcional. Podem ser divididas em estágios conforme o acometimento. O diagnóstico é realizado por meio de história clínica, exames laboratoriais e de neuroimagem, exame clínico neurológico e exames neuropsicológicos. Conclui-se que ainda não se tem a cura das demências e que os estudos de células-tronco podem contribuir nesse sentido.

  10. Ressourceneffiziente Produktion - Innovationsallianz Green Carbody Technologies: Vortrag gehalten auf dem 11. Cottbuser Leichtbauworkshop, Energie als Ressource, 28. und 29. Mai 2013, Cottbus

    OpenAIRE

    Putz, Matthias

    2013-01-01

    Produktionstechnik im Wandel, "Treiber" für Energie- und Ressourceneffizienz. Die Produktionstechnik muss sich den Herausforderungen Endlichkeit von fossilen Ressourcen, demografischer Wandel, Klimawandel, steigender Verbrauch an Elektrizität, Globalisierung und Wohlstand, unter dem Ansatz der Machbarkeit der Effizienz, stellen. Mit dem E3-Konzept -effiziente Produktionstechnik, emissionsneutrale, energieautarke Fabrik, Einbindung des Menschen- forscht die FHG an Lösungen für eine ressourcene...

  11. Linking flood peak, flood volume and inundation extent: a DEM-based approach

    Science.gov (United States)

    Rebolho, Cédric; Furusho-Percot, Carina; Blaquière, Simon; Brettschneider, Marco; Andréassian, Vazken

    2017-04-01

    Traditionally, flood inundation maps are computed based on the Shallow Water Equations (SWE) in one or two dimensions, with various simplifications that have proved to give good results. However, the complexity of the SWEs often requires a numerical resolution which can need long computing time, as well as detailed cross section data: this often results in restricting these models to rather small areas abundant with high quality data. This, along with the necessity for fast inundation mapping, are the reason why rapid inundation models are being designed, working for (almost) any river with a minimum amount of data and, above all, easily available data. Our model tries to follow this path by using a 100m DEM over France from which are extracted a drainage network and the associated drainage areas. It is based on two pre-existing methods: (1) SHYREG (Arnaud et al.,2013), a regionalized approach used to calculate the 2-year and 10-year flood quantiles (used as approximated bankfull flow and maximum discharge, respectively) for each river pixel of the DEM (below a 10 000 km2 drainage area) and (2) SOCOSE (Mailhol,1980), which gives, amongst other things, an empirical formula of a characteristic flood duration (for each pixel) based on catchment area, average precipitation and temperature. An overflow volume for each river pixel is extracted from a triangular shaped synthetic hydrograph designed with SHYREG quantiles and SOCOSE flood duration. The volume is then spread from downstream to upstream one river pixel at a time. When the entire hydrographic network is processed, the model stops and generates a map of potential inundation area associated with the 10-year flood quantile. Our model can also be calibrated using past-events inundation maps by adjusting two parameters, one which modifies the overflow duration, and the other, equivalent to a minimum drainage area for river pixels to be flooded. Thus, in calibration on a sample of 42 basins, the first draft of the

  12. Looking Through the Ice: Searching for Past and Present Habitable Zones in the Martian North Polar Region Using MOLA DEMs

    Science.gov (United States)

    Payne, M. C.; Farmer, J. D.

    2002-12-01

    Hydrothermal systems have been acknowledged as important gateways to accessing a potential subsurface biology (extant or extinct) on Mars. Groundwater circulation, sustained for up to one billion years by large plutonic bodies (as modeled by previous authors), might well be capable of tapping into a deep subsurface biosphere and subsequently carrying members of microbial communities to the surface. Hence, future robotic missions with near surface drilling capabilities may be able to unearth cryopreserved biosignatures, or perhaps extant organisms, in the midst of the hydrothermal system itself. Digital Elevation Models (DEMs) constructed from Mars Orbiter Laser Altimeter (MOLA) data have proved to be a valuable tool in the search for potential habitable zones for extant and extinct life, and the detection of possible hydrothermal systems on Mars. When formatted for use in a Geographical Information Systems (GIS) software package such as ESRI's ArcView, MOLA data can be used to compose DEMs. Those DEMs can, in turn, be used to create contour maps, to allow profiling through features of interest, and to generate hillshaded views, which provide an image-like perspective of a selected area. Furthermore, DEMs eliminate many problems associated with photographic images such as over-/underexposure, poor focus, and albedo values too high or low for optimal observations. During this study, DEMs were used in the analysis of several regions north of 70° N latitude, in the Martian north polar cap and polar cap margin. The regions were selected during a Viking image survey that concentrated on the location of surface expressions of potential magma-ice interactions, and hence past or present hydrothermal activity. Specific features sought included individual volcanoes and volcanic fields, as well as pseudocrater fields, subglacial volcanic constructs (such as tuyas and tindar ridges), fluvial channels and outwash plains (indicative of j”kulhlaup flooding events), possible

  13. Evaluation of the influence of source and spatial resolution of DEMs on derivative products used in landslide mapping

    Directory of Open Access Journals (Sweden)

    Rubini Mahalingam

    2016-11-01

    Full Text Available Landslides are a major geohazard, which result in significant human, infrastructure, and economic losses. Landslide susceptibility mapping can help communities plan and prepare for these damaging events. Digital elevation models (DEMs are one of the most important data-sets used in landslide hazard assessment. Despite their frequent use, limited research has been completed to date on how the DEM source and spatial resolution can influence the accuracy of the produced landslide susceptibility maps. The aim of this paper is to analyse the influence of spatial resolutions and source of DEMs on landslide susceptibility mapping. For this purpose, Advanced Spaceborne Thermal Emission and Reflection (ASTER, National Elevation Dataset (NED, and Light Detection and Ranging (LiDAR DEMs were obtained for two study sections of approximately 140 km2 in north-west Oregon. Each DEM was resampled to 10, 30, and 50 m and slope and aspect grids were derived for each resolution. A set of nine spatial databases was constructed using geoinformation science (GIS for each of the spatial resolution and source. Additional factors such as distance to river and fault maps were included. An analytical hierarchical process (AHP, fuzzy logic model, and likelihood ratio-AHP representing qualitative, quantitative, and hybrid landslide mapping techniques were used for generating landslide susceptibility maps. The results from each of the techniques were verified with the Cohen's kappa index, confusion matrix, and a validation index based on agreement with detailed landslide inventory maps. The spatial resolution of 10 m, derived from the LiDAR data-set showed higher predictive accuracy in all the three techniques used for producing landslide susceptibility maps. At a resolution of 10 m, the output maps based on NED and ASTER had higher misclassification compared to the LiDAR-based outputs. Further, the 30-m LiDAR output showed improved results over the 10-m NED and 10-m

  14. Investigation on the cohesive silt/clay-particle sediment via the coupled CFD-DEM simulations

    Science.gov (United States)

    Xu, S.; Sun, H.; Sun, R.

    2017-12-01

    Sedimentation of silt/clay particles happens ubiquitously in nature and engineering field. There have been abundant studies focusing on the settling velocity of the cohesive particles, while studies on the sediment deposited from silt/clay irregular particles, including the vertical concentration profile of sediment and the various forces among the deposited particles are still lacking. This paper aims to investigate the above topics by employing the CFD-DEM (Computational Fluid Dynamics-Discrete Element Method) simulations. In this work, we simulate the settling of the mono- and poly- dispersed silt/clay particles and mainly study the characteristics of the deposited cohesive sediment. We use the bonded particles to simulate the irregular silt/clay aggregates at the initial state and utilize the van der Waals force for all micro-particles to consider the cohesive force among silt/clay particles. The interparticle collision force and the fluid-particle interaction forces are also considered in our numerical model. The value of the mean structural density of cohesive sediment obtained from simulations is in good agreement with the previous research, and it is obviously smaller than no-cohesive sediment because of the existence of the silt/clay flocs. Moreover, the solid concentration of sediment increases with the growth of the depth. It is because the silt/clay flocs are more easily to break up due to the gradually increased submerged gravity of the deposited particles along the depth. We also obtain the noncontacted cohesive force and contact force profiles during the sedimentation and the self-weight consolidation process. The study of the concentration profile and the forces among silt/clay sediment will help to give an accurate initial condition for calculating the speed of the reconsolidation process by employing the artificial loads, which is necessary for practical designs of the land reclamation projects.

  15. Conversion analysis of a cylindrical biomass particle with a DEM-CFD coupling approach

    Directory of Open Access Journals (Sweden)

    Mohammad Mohseni

    2017-09-01

    Full Text Available Biomass as a renewable energy source has attracted more attention nowadays due to ecological and economical benefits. The main objective of this work is studying the biomass conversion with employing a DEM-CFD coupling approach. In this model, the solid particulates are considered as discrete elements coupled via heat, mass and momentum transfer to the surrounding gas as continuous phase. That is, a comprehensive three-dimensional numerical model is developed and applied to investigate the complex phenomena taking place during biomass conversion in a reactor. In this case, the physical and chemical processes as heat-up, drying, pyrolysis, gasification and combustion are taken into account based on the relevant homogeneous and heterogeneous reactions. This platform predicts the motion of discrete particles based on the newton's equations of motion; and the thermodynamic state of each particle is extended according to the related algorithms. The thermodynamic state estimates the temperature and species distributions inside the particle due to external heat sources and chemical reactions. The reaction rates are described with Arrhenius model, and the reactions in the gas phase are modeled using Partially Stirred Reactor (PaSR model with the standard k−ϵ turbulent model. The conductive and radiative heat transfer between particles as well as convective heat transfer between particles and gas phase are also observed. Due to layered behavior of biomass materials, the shape of particle is considered as cylindrical rather than spherical to predict more realistic results. In order to improve the numerical modeling of biomass conversion, a shrinkage model is also developed and validated with experimental data in literature.

  16. Protection of the climate in Germany. Second report presented by the Government of the Federal Republic of Germany according to the United Nations Agreement on Climatic Changes; Klimaschutz in Deutschland. Zweiter Bericht der Regierung der Bundesrepublik Deutschland nach dem Rahmenuebereinkommen der Vereinten Nationen ueber Klimaaenderungen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-11-01

    This report is the second government report after the climate convention. It contains an inventory of emissions of relevance for the greenhouse effect and the states where they are stored (forest) plus a description of the government`s preventive measures to protect the climate. You can find emission scenarios and the projection to the years 2000, 2005, 2010 and 2020 and an assessment of the effects of the measures. (orig./SR)

  17. Change of supplier in the power industry: the problem of network takeover paying for present market value, seen against the background of the institution of price control in compliance with paragraph 12 of the Federal electricity rate system. Versorgerwechsel in der Stromwirtschaft: Die Problematik der Netzuebernahme zum Sachzeitwert vor dem Hintergrund der Preisaufsicht nach Paragraph 12 Bundestarifordnung Elektrizitaet

    Energy Technology Data Exchange (ETDEWEB)

    Schaefer, G.

    1993-01-01

    There are three arguments put forward in favour of a takeover paying for the present market value: - There would be no effect on consumer prices. - It is a fair compromise that can be accepted by both utilities. - The law on franchise agreements requires takeovers to be based on the present value principle. None of these arguments will bear closer scrutiny in the light of the law on pricing schemes, franchise agreements, or the specific conditions governing the electricity market. The author shows that takeover contracts on the basis of present value payment would involve double counting of costs and thus would create considerable price increasing effects. The other side of the coin is: Since the price supervisory authority will not allow double counting, the utility taking over a network at present value would have to bear all economic disadvantages. (orig.)

  18. The accident in Fukushima. Preliminary report on the accident progress in the nuclear power plants as a consequence of the earth quake on 11th March 2011; Der Unfall in Fukushima. Zwischenbericht zu den Ablaeufen in den Kernkraftwerken nach dem Erdbeben vom 11. Maerz 2011

    Energy Technology Data Exchange (ETDEWEB)

    Borghoff, Stefan; Brueck, Benjamin; Kilian-Huelsmeyer, Yvonne; Maqua, Michael; Mildenberger, Oliver; Quester, Claudia; Stahl, Thorsten; Thuma, Gernot; Wetzel, Norbert; Wild, Volker

    2011-08-15

    The preliminary report on the accident progress in the nuclear power plants as a consequence of the earth quake on 11th March 2011 describes the chronologic sequence of the accident in the different units of the power plant. The measures for mitigation of the accident impact at the site of Fukushima Daiichi and Fukushima Daini included the efforts to reach and maintain stable plant conditions. The issue radiological situation includes an estimation of the air-borne radionuclide release, the contamination of the environment and the sea water, measures for protection of the public. The lessons learned following the NISA and IAEA fact finding missions and the open questions are summarized.

  19. MRI based volumetric assessment of knee cartilage after ACL-reconstruction, correlated with qualitative morphologic changes in the joint and with clinical outcome. Is there evidence for early posttraumatic degeneration?; MRT-basierte Knorpelvolumetrie nach Kreuzbandersatzplastik in Korrelation mit qualitativen Gelenkveraenderungen und dem klinischen Outcome. Gibt es Hinweise auf fruehzeitige posttraumatische degenerative Veraenderungen?

    Energy Technology Data Exchange (ETDEWEB)

    Arnoldi, A.P.; Weckbach, S.; Horng, A.; Reiser, M. [Ludwig-Maximilians-Univ. Muenchen (Germany). Dept. of Clinical Radiology; Nussbickel, C. [Klinikum Garmisch-Partenkirchen (Germany). Dept. of Internal Medicine; Noebauer, I. [Medizinische Universitaet Wien (Austria). Klinik fuer Radiodiagnostik; Zysk, S. [Orthopaedie Zentrum Groebenzell (Germany). Center of Orthopaedics; Glaser, C. [NYU Medical Center, New York, NY (United States). Dept. of Radiology

    2011-12-15

    Purpose: The purpose of this study was to analyze potential quantitative and qualitative changes of the knee cartilage and joint indicative of early posttraumatic OA 4 years after ACL-reconstruction and to correlate the MRI-findings with the clinical outcome (CO). Materials and Methods: 1.5 T MRI-scans were performed on 9 patients post-op and 4 years later. Using a high-resolution T 1-w-fs-FLASH-3D-sequence cartilage volume (cVol) and thickness (mTh) were quantified. Using standard PD-w fs and T 1-w sequences qualitative changes of the joint structures were analyzed based on the WORMS-score. CO was rated by an orthopaedic surgeon using Lysholm-score, OAK-score, Tegner-activity-score (TAS), and Arthrometer KT-1000 testing. Results: Mean changes of cVol were -1.8 % (range: -5.9 %; + 0.7 %) and of mTh -0.8 % (range: -3.0 %; + 1.1 %). No significant change (95 %-CI) could be identified for any compartment. Three patients developed new peripatellar ostheophytes, acute trauma related changes mostly decreased. Mean outcome of Lysholm-score and OAK-score were 90 pts and 86 pts, mean TAS was 4.3 pts. Average maximum tibial translation reached 5.2 mm comparing to 6.7 mm on the healthy contralateral side. Conclusion: Despite a tendency towards decreased cVol and mTh 4 years after ACL-reconstruction qMRI revealed no significant cartilage loss. Newly developing osteophytes did not match with the observed good CO. This small pilot study motivates future quantitative and qualitative-structural MRI-based assessment of articular cartilage and other joint structures in order to improve diagnostic tools for the detection of early OA. (orig.)

  20. Consideration of the energetic quality of buildings during specificaton of adequacy limits for the cost of housing and heating in line with the social security statute book; Die Beruecksichtigung der energetischen Gebaeudequalitaet bei der Festlegung von Angemessenheitsgrenzen fuer die Kosten der Unterkunft und Heizung nach dem Sozialgesetzbuch

    Energy Technology Data Exchange (ETDEWEB)

    Malottki, Christian von

    2012-07-27

    The author of the contribution reports on the consideration of the energy quality of buildings during the specification of adequacy limits for the cost of housing and heating in line with the social security statute book. Subsequently to the description of the legal and technical energy starting situation, the methods used to describe the energy quality of buildings, the methods of survey of pricing differences as well as the possibilities of application of an energetically differentiated suitability level are described.