WorldWideScience

Sample records for open wedge high

  1. Modified retro-tubercle opening-wedge versus conventional high tibial osteotomy.

    Science.gov (United States)

    Keyhani, Sohrab; Abbasian, Mohammad Reza; Kazemi, Seyed Morteza; Esmailiejah, Ali Akbar; Seyed Hosseinzadeh, Hamid Reza; Shahi, Alisina; Shahi, Ali Sina; Firouzi, Farzad

    2011-01-01

    Despite the fact that common surgical techniques for the treatment of genu varum usually correct the malalignment in the affected knee, these methods have significant complications and cause problems in the long term. Retro-tubercle opening-wedge high tibial osteotomy is among the newer techniques for the treatment of genu varum. The goal of this study was to compare the results of retro-tubercle opening-wedge high tibial osteotomy with those of medial opening-wedge osteotomy. In a randomized, controlled trial, 72 patients with varus knees who were scheduled for surgery were assigned into either the retro-tubercle opening-wedge high tibial osteotomy (n=34) or medial opening-wedge osteotomy groups (n=38). Groups were matched for age and sex. The position of the patella was compared with respect to the tuberosity and the upper tibial slope pre- and postoperatively. Patients were followed for an average of 13 months (range, 10-21 months). In the retro-tubercle opening-wedge high tibial osteotomy group, the length of the patellar tendon did not significantly differ pre- and postoperatively (P≥.5); however, in the medial opening-wedge osteotomy group, a statistically significant shortening was noted in patellar tendon postoperatively (P≤.05). Similarly, the tibial plateau inclination showed a statistically significant difference postoperatively in the medial opening-wedge osteotomy group, while the difference in the retro-tubercle opening-wedge high tibial osteotomy group did not reach statistical significance.

  2. Comparison of clinical and radiological outcomes between opening-wedge and closing-wedge high tibial osteotomy: A comprehensive meta-analysis

    Science.gov (United States)

    Wu, Lingfeng; Lin, Jun; Jin, Zhicheng; Cai, Xiaobin; Gao, Weiyang

    2017-01-01

    High tibial osteotomy (HTO) has been widely used for clinical treatment of osteoarthritis of the medial compartment of the knee, and both opening-wedge and closing-wedge HTO are the most commonly used methods. However, it remains unclear which technique has better clinical and radiological outcomes in practice. To systematically evaluate this issue, we conducted a comprehensive meta-analysis by pooling all available data for the opening-wedge HTO and closing-wedge HTO techniques from the electronic databases including PubMed, Embase, Wed of Science and Cochrane Library. A total of 22 studies encompassing 2582 cases were finally enrolled in the meta-analysis. There was no significant difference regarding surgery time, duration of hospitalization, knee pain VAS, Lysholm score and HSS knee score (clinical outcomes) between the opening-wedge and closing-wedge HTO groups (P > 0.05). However, the opening-wedge HTO group showed wider range of motion than the closing-wedge HTO group (P = 0.003). Moreover, as for Hip-Knee-Ankle angle and mean angle of correction, no significant difference was observed between the opening-wedge and closing-wedge HTO groups (P > 0.05), while the opening-wedge HTO group showed greater posterior tibial slope angle (P < 0.001) and lesser patellar height than the closing-wedge HTO group (P < 0.001). On light of the above analysis, we believe that individualized surgical approach should be introduced based on the clinical characteristics of each patient. PMID:28182736

  3. Total knee arthroplasty after failed high tibial osteotomy: a systematic review of open versus closed wedge osteotomy.

    Science.gov (United States)

    Han, Jae Hwi; Yang, Jae-Hyuk; Bhandare, Nikhl N; Suh, Dong Won; Lee, Jong Seong; Chang, Yong Suk; Yeom, Ji Woong; Nha, Kyung Wook

    2016-08-01

    Medial opening wedge high tibial osteotomy (HTO) has become increasingly popular as an alternative to lateral closing wedge osteotomy for the treatment of medial compartment knee osteoarthritis with varus deformity. The present systematic review was conducted to provide an objective analysis of total knee arthroplasty (TKA) outcomes following previous knee osteotomy (medial opening wedge vs. lateral closing wedge). A literature search of online databases (MEDLINE, EMBASE, Cochrane Library database) was made, in addition to manual search of major orthopaedic journals. The methodological quality of each of the studies was assessed on the Newcastle-Ottawa Scale and Effective Practice and Organization of Care. A total of ten studies were included in the review. There were eight studies with Level IV and two studies with Level III evidence. Eight studies reported clinical and radiologic scores. Comparative studies between TKA following medial opening and lateral closing wedge HTO did not demonstrate statistically significant clinical and radiologic differences. The revision rates were similar. However, more technical issues during TKA surgery after lateral closing wedge HTO were mentioned than the medial open wedge group. The quadriceps snip, tibial tubercle osteotomy, and lateral soft tissue release were more frequently needed in the lateral closing wedge HTO group. In addition, because of loss of proximal tibia bone geometry in the lateral closing wedge HTO group, concerns such as tibia stem impingement in the lateral tibial cortex was noted. The present systematic review suggests that TKA after medial opening and lateral closing wedge HTO showed similar performance. Clinical and radiologic outcome including revision rates did not statistically differ from included studies. However, there are more surgical technical concerns in TKA conversion from lateral closing wedge HTO than from the medial opening wedge HTO group. IV.

  4. Open Wedge High Tibial Osteotomy and Combined Arthroscopic Surgery in Severe Medial Osteoarthritis and Varus Malalignment: Minimum 5-Year Results

    OpenAIRE

    Yoo, Moon-Jib; Shin, Yong-Eun

    2016-01-01

    Purpose To evaluate the radiologic and functional outcomes of medial open wedge high tibial osteotomy (HTO) combined with arthroscopic procedure in patients with medial osteoarthritis. Materials and Methods From June 1996 to March 2010, 26 patients (32 knees) who underwent medial open wedge osteotomy and arthroscopic operation for medial osteoarthritis were retrospectively reviewed. Measurements included hip-knee-ankle (HKA) angle, femorotibial angle, medial proximal tibial angle, posterior t...

  5. Measurement of tibial slope angle after medial opening wedge high tibial osteotomy: case series

    Directory of Open Access Journals (Sweden)

    Ricardo Hideki Yanasse

    Full Text Available CONTEXT AND OBJECTIVE: In the past, changes in tibial slope were not considered when planning or evaluating osteotomies, and success in high tibial osteotomy was related to the alignment and amount of femorotibial angular correction. The aim here was to measure changes in tibial slope after medial opening wedge tibial osteotomy and investigate the effect of tibial slope angle on the clinical results. DESIGN AND SETTING: Retrospective review study on a series of cases, at the Department of Orthopedics and Traumatology, Faculdade de Medicina de Marília (Famema, Marília, Brazil. METHODS: Twenty-eight patients were studied, and a total of thirty-one knees. Lateral roentgenograms of the tibia were used pre and postoperatively to measure the tibial slope based on the proximal tibial anatomical axis. The clinical results were measured using the Lysholm knee score. RESULTS: There was an average increase in tibial slope angle after surgery of 2.38° (95% confidence interval: ± 0.73°. There was no correlation (r = -0.28 between the postoperative Lysholm knee score and the difference in tibial slope angle from before to after surgery (P = 0.13. CONCLUSION: Medial opening wedge tibial osteotomy led to a small increase in tibial slope. No significant correlation was found between increased tibial slope and short-term clinical results after high tibial osteotomy. Other clinical studies are needed in order to establish whether extension or flexion osteotomy could benefit patients with medial compartment gonarthrosis.

  6. Personalized implant for high tibial opening wedge: combination of solid freeform fabrication with combustion synthesis process.

    Science.gov (United States)

    Zhim, Fouad; Ayers, Reed A; Moore, John J; Moufarrège, Richard; Yahia, L'Hocine

    2012-09-01

    In this work a new generation of bioceramic personalized implants were developed. This technique combines the processes of solid freeform fabrication (SFF) and combustion synthesis (CS) to create personalized bioceramic implants with tricalcium phosphate (TCP) and hydroxyapatite (HA). These porous bioceramics will be used to fill the tibial bone gap created by the opening wedge high tibial osteotomy (OWHTO). A freeform fabrication with three-dimensional printing (3DP) technique was used to fabricate a metallic mold with the same shape required to fill the gap in the opening wedge osteotomy. The mold was subsequently used in a CS process to fabricate the personalized ceramic implants with TCP and HA compositions. The mold geometry was designed on commercial 3D CAD software. The final personalized bioceramic implant was produced using a CS process. This technique was chosen because it exploits the exothermic reaction between P₂O₅ and CaO. Also, chemical composition and distribution of pores in the implant could be controlled. To determine the chemical composition, the microstructure, and the mechanical properties of the implant, cylindrical shapes were also fabricated using different fabrication parameters. Chemical composition was performed by X-ray diffraction. Pore size and pore interconnectivity was measured and analyzed using an electronic microscope system. Mechanical properties were determined by a mechanical testing system. The porous TCP and HA obtained have an open porous structure with an average 400 µm channel size. The mechanical behavior shows great stiffness and higher load to failure for both ceramics. Finally, this personalized ceramic implant facilitated the regeneration of new bone in the gap created by OWHTO and provides additional strength to allow accelerated rehabilitation.

  7. Sagittal osteotomy inclination in medial open-wedge high tibial osteotomy.

    Science.gov (United States)

    Lee, Seung-Yup; Lim, Hong-Chul; Bae, Ji Hoon; Kim, Jae Gyoon; Yun, Se-Hyeok; Yang, Jae-Hyuk; Yoon, Jung-Ro

    2017-03-01

    Unlike postoperative changes in posterior tibial slope after medial open-wedge high tibial osteotomy, sagittal osteotomy inclination has not been examined. It has been recommended that the osteotomy line in the sagittal plane be parallel to the medial posterior tibial slope. The purpose of this study was to determine the frequency of parallel osteotomy in medial open-wedge high tibial osteotomy. To determine the sagittal osteotomy inclination, the angle between the medial joint line and the osteotomy line was measured in the lateral radiograph. A positive angle value indicates that the osteotomy is anteriorly inclined relative to the medial posterior tibial slope. Correlation between the sagittal osteotomy inclination and posterior tibial slope was also evaluated. The mean sagittal osteotomy inclination was 15.1 ± 7.5°. The majority 87.1 % of knees showed an anterior-inclined osteotomy. There was a significantly positive correlation between the postoperative posterior tibial slope and the sagittal osteotomy inclination (r, 0.33; 95 % confidence interval (CI) 0.19-0.46; P osteotomy inclination (r, 0.35; 95 % CI 0.21-0.47; P osteotomy in the sagittal plane relative to the medial joint line was planned, only 12.9 % of cases achieved osteotomy parallel to the medial posterior tibial slope in the sagittal plane. Because of high rate of the anterior-inclined osteotomy and their correlations with posterior tibial slope, surgeons should make all efforts to perform parallel osteotomy relative to medial posterior tibial slope. IV.

  8. Accuracy and initial stability of open- and closed-wedge high tibial osteotomy: a cadaveric RSA study.

    NARCIS (Netherlands)

    Gaasbeek, R.D.A.; Welsing, R.T.C.; Verdonschot, N.J.J.; Rijnberg, W.J.; Loon, C.J.M. van; Kampen, A. van

    2005-01-01

    We analyzed the difference in angle-correction accuracy and initial stability between open-wedge (OWO) and closed-wedge tibial valgus osteotomy (CWO). Five fresh-frozen pairs of human cadaver lower limbs were used; their bone mineral density (BMD) was measured with DEXA and a planned 7 degrees valgu

  9. Comparison of Lateral Closing-Wedge Versus Medial Opening-Wedge High Tibial Osteotomy on Knee Joint Alignment and Kinematics in the ACL-Deficient Knee.

    Science.gov (United States)

    Ranawat, Anil S; Nwachukwu, Benedict U; Pearle, Andrew D; Zuiderbaan, Hendrik A; Weeks, Kenneth D; Khamaisy, Saker

    2016-12-01

    Lateral closing-wedge (LCW) and medial opening-wedge (MOW) high tibial osteotomies (HTOs) correct varus knee alignment and stabilize the anterior cruciate ligament (ACL)-deficient knee. Tibiofemoral and patellofemoral alignment and kinematics after HTO are not well quantified. To compare the effect of LCW and MOW HTO on tibiofemoral and patellofemoral alignment in the ACL-deficient knee. Controlled laboratory study. Anterior drawer, Lachman, and pivot-shift tests were performed on cadaveric specimens (N = 16), and anterior tibial translation and tibial rotation were measured for the native and ACL-sectioned knee. The right and left knee of each cadaveric specimen underwent an LCW and MOW HTO, respectively, and stability testing was repeated. All cadavers underwent pre- and postosteotomy computerized tomography with 3-dimensional computer modeling to determine the effect of HTO on posterior tibial slope, as well as tibial and patellofemoral axial plane alignment (tibial axial rotation and patellar axial tilt). Correction to neutral coronal alignment was obtained with both osteotomy techniques; however, larger posterior tibial slope neutralization was achieved with LCW compared with MOW (mean ± SD, 11° ± 3.8° vs 5° ± 5°). LCW demonstrated a greater decrease in anterior tibial translation (P rotation with pivot shift. Relative to MOW, LCW resulted in greater tibial axial rotation and patellar axial tilt (7.7° ± 4° and 5.6° ± 3.9° [LCW], 2.8° ± 2.3° and 2.4° ± 0.9° [MOW], respectively; P rotation and lateral patellar tilt, which may adversely affect the patellofemoral joint. More work is needed to understand the clinical and functional outcome of these biomechanical findings in the ACL-deficient knee. © 2016 The Author(s).

  10. Medial opening wedge high tibial osteotomy alters knee moments in multiple planes during walking and stair ascent.

    Science.gov (United States)

    Leitch, Kristyn M; Birmingham, Trevor B; Dunning, Cynthia E; Giffin, J Robert

    2015-07-01

    Medial opening wedge high tibial osteotomy is a surgical procedure intended to redistribute loads on the knee in patients with medial compartment knee osteoarthritis (OA). The surgery may affect moments in multiple planes during ambulation, with potential beneficial or detrimental effects on joint loads. The objective of this study was to investigate three-dimensional external knee moments before and after medial opening wedge high tibial osteotomy during level walking and during stair ascent. Fourteen patients with varus alignment and osteoarthritis primarily affecting the medial compartment of the tibiofemoral joint were assessed. Three-dimensional motion analyses during level walking and stair ascent was evaluated using inverse dynamics before, 6 and 12 months after surgery. Mean changes at 12 months suggested decreases in the peak knee adduction, flexion and internal rotation moments, with standardized response means ranging from 0.15 to 2.54. These decreases were observed despite increases in speed. Changes in alignment were associated with changes in the adduction and internal rotation moments, but not the flexion moment. Both pre- and postoperatively, the peak knee adduction moment was significantly lower (p=0.001) during stair ascent than during level walking, while the flexion and internal rotation moments were significantly higher (pplanes of motion during ambulation, suggesting substantial alterations of the loads on the knee during ambulation.

  11. Open-wedge high tibial osteotomy: incidence of lateral cortex fractures and influence of fixation device on osteotomy healing.

    Science.gov (United States)

    Dexel, Julian; Fritzsche, Hagen; Beyer, Franziska; Harman, Melinda K; Lützner, Jörg

    2017-03-01

    Open-wedge high tibial osteotomy (HTO) is an established treatment for young and middle-aged patients with medial compartment knee osteoarthritis and varus malalignment. Although not intended, a lateral cortex fracture might occur during this procedure. Different fixation devices are available to repair such fractures. This study was performed to evaluate osteotomy healing after fixation with two different locking plates. Sixty-nine medial open-wedge HTO without bone grafting were followed until osteotomy healing. In patients with an intact lateral hinge, no problems were noted with either locking plate. A fracture of the lateral cortex occurred in 21 patients (30.4 %). In ten patients, the fracture was not recognized during surgery but was visible on the radiographs at the 6-week follow-up. Lateral cortex fracture resulted in non-union with the need for surgical treatment in three out of eight (37.5 %) patients using the newly introduced locking plate (Position HTO Maxi Plate), while this did not occur with a well-established locking plate (TomoFix) (0 out of 13, p = 0.023). With regard to other adverse events, no differences between both implants were observed. In cases of lateral cortex fracture, fixation with a smaller locking plate resulted in a relevant number of non-unions. Therefore, it is recommended that bone grafting, another fixation system, or an additional lateral fixation should be used in cases with lateral cortex fracture. III.

  12. Comparison between two angular stable locking plates for medial opening-wedge high tibial osteotomy: Decisive wedge locking plate versus TomoFix™.

    Science.gov (United States)

    Shin, Young-Soo; Kim, Keong-Ho; Sim, Hyun-Bo; Yoon, Jung-Ro

    2016-11-01

    An adequate stable fixation implant should be used for medial opening-wedge high tibial osteotomy (MOWHTO) to promote rapid bone healing without complications. This study compared the radiographic and clinical outcomes as well as plate-specific complications between two angular stable locking plates in patients following MOWHTO. This prospective study involved 97 patients (50 with DWL(®), group I; 47 with TomoFix™, group II) undergoing MOWHTO for primary medial compartment osteoarthritis between 2010 and 2013. Clinical and radiographic evaluations were performed by using the HSS and WOMAC scores, and calculating mechanical femorotibial angle (mFTA), medial proximal tibial angle (MPTA), joint line convergence angle (JLCA), and posterior tibial slope (PTS) on radiographs both preoperatively and after 3 years. A statistically significant difference was observed for the MPTA at the last follow-up between the two groups (P = 0.033). Additionally, the last follow-up MPTA of group I was associated with the osteotomy technique (P = 0.004) and preoperative JLCA (P = 0.034) whereas the last follow-up MPTA of group II was associated with gender (P = 0.001) and BMI (P = 0.008). Furthermore, the results showed that group I had a higher rate of non-union (4%) compared to that in group II (0%). Both locking plates are useful tools in the treatment of medial compartment knee osteoarthritis with varus deformity in young, active patients. However, under special consideration of the complication we found in present study, the TomoFix™ seems to be a better alternative in using the MOWHTO for highly demanding patients. Copyright © 2016 The Japanese Orthopaedic Association. Published by Elsevier B.V. All rights reserved.

  13. Stress analysis of the tibial plateau according to the difference of blade path entry in opening wedge high tibial osteotomy

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jun Woo; Xin, YuanZhu; Yang, Seok Jo [Chungnam National University, Daejeon (Korea, Republic of); Ji, Jong Hun; Panchal, Karnav; Kwon, Oh Soo [The Catholic University of Korea, Daejeon (Korea, Republic of)

    2015-03-15

    High tibial osteotomy (HTO) has been used to successfully treat patients with genu varus deformities that can improve mechanical function and condition in the knee joint. Clinical studies have reported that bow legs often occur with a concentrated load on the varus of the tibia. This study aimed to analyze and verify the clinical test data result by utilizing the three-dimensional (3D) static finite element method (FEM). The 3D model of lower extremities, which include the femur, tibia, meniscus, and knee articular cartilage, was created using the images from a computer tomography scan and magnetic resonance imaging. In this report, we compared changes in stress distribution and force reaction on the tibial plateau because of critical problems caused by unexpected changes in the tibial posterior-slope angle because of HTO. The results showed that the 5 .deg. wedge-angle virtual opening wedge HTO without and with the posterior-slope angle shows has a load concentration of approximately 60% and 45% in the medial region, respectively.

  14. Intraoperative adjustment of alignment under valgus stress reduces outliers in patients undergoing medial opening-wedge high tibial osteotomy.

    Science.gov (United States)

    Kim, Man Soo; Son, Jong Min; Koh, In Jun; Bahk, Ji Hoon; In, Yong

    2017-08-01

    A considerable percentage of outliers with under- or over-correction continue to be reported despite precise preoperative planning and cautious intraoperative correction of lower limb alignment in medial opening-wedge high tibial osteotomy (MOWHTO). The purpose of this study was to determine whether our novel technique for the intraoperative adjustment of alignment under valgus stress reduces the number of outliers in patients undergoing MOWHTO compared to the conventional technique, which corrects alignment according to the cable method only. One hundred seventeen consecutive knees were enrolled in this case-control study. The first 52 knees (51 patients) were corrected in accordance with preoperative plans using the Dugdale method with modification with an intraoperative cable (group 1). In the other 65 knees (60 patients), the angle was corrected using the Dugdale method and limb alignment was adjusted using the intraoperative cable technique by applying valgus stress to the knee joint (group 2). The postoperative weight bearing line ratios and mechanical axis of the lower limb were compared at postoperative one year. Each knee was evaluated according to the Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) score preoperatively and at postoperative one year. A significant reduction in the number of outliers was seen in group 2 compared to group 1 (group 1 = 48.1%, group 2 = 9.2%, p outliers compared to a technique that corrected alignment using the cable method in patients undergoing MOWHTO. Level III, retrospective comparative study.

  15. Osteotomy configuration of the proximal wedge and analysis of the affecting factors in the medial open-wedge high tibial osteotomy.

    Science.gov (United States)

    Lee, Yong Seuk; Kang, Jong Yeal; Lee, Myung Chul; Elazab, Ashraf; Choi, Uk Hyun; Kang, Seo Goo; Lee, Kyoung Jae; Lee, Sahnghoon

    2017-03-01

    The purposes of this study were (1) to confirm the disparity of the measured thickness at the lateral hinge between anterior-posterior (AP) radiograph and 3D CT image, (2) to evaluate the affecting factors, and (3) to evaluate the differences between uniplanar and biplanar osteotomies. From 2012 to 2014, a prospective comparative study was performed with 30 patients who received uniplanar osteotomy (group I) and 35 patients who received biplanar osteotomy (group II). For measurement of the proximal wedge, postoperative AP radiograph and 3D CT images were used. In the AP radiograph, medial and lateral bony bridge thicknesses were measured. In the 3D CT, the anterior and posterior images parallel to the coronal plane were selected for the evaluation. Coronal osteotomy slope was measured with the anterior image of the 3D CT scan. Sagittal osteotomy slope was measured with the sagittal section of the CT scan. Differences between the lateral bony bridge thicknesses measured in AP radiograph and the posterolateral posterolateral bony bridge thicknesses measured in 3D CT were statistically significant in both groups. Negative correlation was observed in the biplanar osteotomy group. Differences of the sagittal osteotomy slope from the native tibial slope showed negative correlation in the biplanar osteotomy group. Thickness of the posterolateral bony bridge was smaller compared to the observed thickness on the AP radiograph image that is routinely used for the follow-up. The thickness would be getting smaller if osteotomy is performed with an abrupt angle on the coronal plane and reverse slope on the sagittal plane. Therefore, osteotomy with abrupt angle on the coronal plane and reverse slope on the sagittal plane should be avoided for the proper thickness of the posterolateral bony bridge. III.

  16. Opening- and Closing-Wedge Distal Femoral Osteotomy

    Science.gov (United States)

    Chahla, Jorge; Mitchell, Justin J.; Liechti, Daniel J.; Moatshe, Gilbert; Menge, Travis J.; Dean, Chase S.; LaPrade, Robert F.

    2016-01-01

    Background: Lateral compartment osteoarthritis of the knee can be a challenging pathology in the younger, active population due to limited treatment options and high patient expectations. Distal femoral osteotomy (DFO) has been reported to be a potential treatment option. Purpose: To perform a systematic review on the survival, outcomes, and complications of DFO for treatment of genu valgum with concomitant lateral compartment osteoarthritis of the knee. Study Design: Systematic review; Level of evidence, 4. Methods: A systematic review of the literature was performed using the Cochrane Database of Systematic Reviews, the Cochrane Central Registry of Controlled Trials, PubMed, and MEDLINE from 1980 to present. Inclusion criteria were as follows: outcomes of opening- and closing-wedge DFOs performed for treatment of genu valgum with concomitant lateral compartment osteoarthritis of the knee, English language, minimum 2-year follow-up, and human studies. Data abstracted from the selected studies included type of osteotomy (opening vs closing), survival rate, patient-reported and radiographic outcomes, and complications. Results: Fourteen studies met the inclusion criteria and were considered for the review. A total of 9 closing-wedge and 5 opening-wedge DFO studies were included. All were retrospective studies and reported good to excellent patient-reported outcomes after DFO. Survival decreased with increasing time from surgery, with 1 study reporting a 100% survival rate at 6.5 years, compared with 21.5% at 20 years in another study. A low rate of complications was reported throughout the review. Conclusion: Highly heterogeneous literature exists for both opening- and closing-wedge DFOs for the treatment of isolated lateral compartment osteoarthritis with valgus malalignment. A mean survival rate of 80% at 10-year follow-up was reported, supporting that this procedure can be a viable treatment option to delay or reduce the need for joint arthroplasty. A low

  17. Mechanism of bone incorporation of beta-TCP bone substitute in open wedge tibial osteotomy in patients.

    NARCIS (Netherlands)

    Gaasbeek, R.D.A.; Toonen, H.G.; Heerwaarden, R.J. van; Buma, P.

    2005-01-01

    A histological study was performed of bone biopsies from 16 patients (17 biopsies) treated with open wedge high tibial osteotomies for medial knee osteoarthritis. The open wedge osteotomies were filled with a wedge of osteoconductive beta tricalcium phosphate (beta-TCP) ceramic bone replacement. At

  18. ACL injury while jumping rope in a patient with an unintended increase in the tibial slope after an opening wedge high tibial osteotomy.

    Science.gov (United States)

    Jung, Kwang Am; Lee, Su Chan; Hwang, Seung Hyun; Song, Moon Bok

    2009-08-01

    High tibial osteotomy (HTO) is an accepted surgical technique for the treatment of medial compartmental arthrosis of the knee in younger patients. Compared to total knee arthroplasty, HTO may be a good choice in patients who wish to continue with heavy labor and/or impact sports. Based on the rehabilitation protocol after HTO, impact sports, such as running, jumping rope, and full sports activities, are generally permitted 6 months postoperatively. Jumping rope is an excellent form of aerobic exercise, and when done properly, jumping rope can lead to a dramatic improvement in rehabilitation and full sports activities. However, an adequate evaluation should be performed prior to initiating impact sports. We present the case of a ruptured anterior cruciate ligament that occurred in a patient with an unintended increase in the tibial slope after an opening wedge HTO who was jumping rope.

  19. The prevention of a lateral hinge fracture as a complication of a medial opening wedge high tibial osteotomy: a case control study.

    Science.gov (United States)

    Ogawa, H; Matsumoto, K; Akiyama, H

    2017-07-01

    We aimed to investigate factors related to the technique of medial opening wedge high tibial osteotomy which might predispose to the development of a lateral hinge fracture. A total of 71 patients with 82 osteotomies were included in the study. Their mean age was 62.9 years (37 to 80). The classification of the type of osteotomy was based on whether it extended beyond the fibular head. The level of the osteotomy was classified according to the height of its endpoint. At a mean follow-up of 20 months (6 to 52), a total of 15 lateral hinge fractures (18.3%) were identified. A sufficient osteotomy, in which both anterior and posterior tibial cortices were involved with extension into the lateral aspect of the plateau in relation to an anteroposterior line tangential to the medial edge of the fibular head in the CT axial plane, was seen in 48 knees (71.6%) in those without a lateral hinge fracture and in seven (46.7%) in those with a lateral hinge fracture. An osteotomy which ended above the level of the fibular head was seen in nine (13.4%) of the knees without a lateral hinge fracture and seven (46.7%) of the those with a lateral hinge fracture. There was a significant relationship between the absence of a lateral hinge fracture and both a sufficient osteotomy and one whose endpoint was at the level of the fibular head (p = 0.0451 and p = 0.0214, respectively). A sufficient osteotomy involving both the anterior and posterior cortices, whose endpoint is at the level of the fibular head, should be performed when undertaking a medial opening wedge high tibial osteotomy if a lateral hinge fracture is to be avoided as a complication. Cite this article: Bone Joint J 2017;99-B:887-93. ©2017 The British Editorial Society of Bone & Joint Surgery.

  20. Medial opening wedge distal femoral osteotomy for post-traumatic secondary knee osteoarthritis.

    Science.gov (United States)

    Matsui, Gen; Akiyama, Takenori; Ikemura, Satoshi; Mawatari, Taro

    2014-04-30

    Osteoarthritis of the knee secondary to femoral fracture is difficult to treat. There are some surgical options, such as total knee arthroplasty or correction osteotomy. Opening wedge high tibial osteotomy is an established treatment of gonarthrosis. However, few reports are available on the effectiveness of a medial opening wedge distal femoral osteotomy. We present a case of a medial opening wedge distal femoral osteotomy on gonarthrosis secondary to a malunited femoral fracture with varus deformity and leg length discrepancy. This osteotomy was performed at the deformed femur, with locking plate fixation and autologous bone graft. Six months after the surgery, the osteotomy site was filled with bridging callus. Two years later, the Knee Society Score improved from 45 to 90 points. Medial opening wedge distal femoral osteotomy can be a useful method to treat knee osteoarthritis associated with distal femoral deformity.

  1. Patellofemoral Osteoarthritis Progression and Alignment Changes after Open-Wedge High Tibial Osteotomy Do Not Affect Clinical Outcomes at Mid-term Follow-up.

    Science.gov (United States)

    Goshima, Kenichi; Sawaguchi, Takeshi; Shigemoto, Kenji; Iwai, Shintaro; Nakanishi, Akira; Ueoka, Ken

    2017-10-01

    To evaluate the clinical and radiological outcomes of open-wedge high tibial osteotomy (OWHTO) with respect to the patellofemoral joint and to assess whether patellofemoral osteoarthritis (OA) progression and alignment changes after OWHTO affect clinical outcomes. Inclusion criteria were consecutive patients who underwent OWHTO from March 2005 to September 2013. Exclusion criteria were loss to follow-up within 2 years and absence of second-look arthroscopy findings at the time of plate removal. The clinical parameters, including anterior knee pain while climbing stairs, Japanese Orthopedic Association score, and Oxford Knee Score, were evaluated. Radiological outcomes, including weight-bearing line ratio, modified Blackburne-Peel ratio, posterior tibial slope, tilting angle, lateral shift ratio, and patellofemoral OA (Kellgren-Lawrence grade), were evaluated preoperatively and at the final follow-up. Cartilage status (International Cartilage Repair Society grade) was evaluated at the initial HTO and at plate removal. Fifty-three patients (60 knees) were included in this study. The mean follow-up was 58.2 ± 22.4 months. Two knees (3%) presented with mild anterior knee pain after OWHTO. The mean Japanese Orthopedic Association score (66.9 ± 11.2 to 91.2 ± 9.7) significantly improved (P < .001), and the mean Oxford Knee Score at the final follow-up was 42.0 ± 5.3. The mean modified Blackburne-Peel ratio (0.9 ± 0.1 to 0.7 ± 0.1, P < .001) and tilting angle (6.8 ± 3.7 to 5.6 ± 3.4, P = .033) significantly decreased after OWHTO, whereas no significant changes in posterior tibial slope (P = .511) and lateral shift ratio (P = .522) were observed. Radiologically, patellofemoral OA had progressed in 15 knees (27%), and arthroscopically patellofemoral cartilage degeneration had progressed in 27 knees (45%). However, there was no significant correlation between changes in patellofemoral alignment and clinical outcomes. Changes in patellofemoral alignment and

  2. Vertebral Osteotomies in Ankylosing Spondylitis-Comparison of Outcomes Following Closing Wedge Osteotomy versus Opening Wedge Osteotomy: A Systematic Review.

    Science.gov (United States)

    Ravinsky, Robert A; Ouellet, Jean-Albert; Brodt, Erika D; Dettori, Joseph R

    2013-04-01

    Study Design Systematic review. Study Rationale To seek out and assess the best quality evidence available comparing opening wedge osteotomy (OWO) and closing wedge osteotomy (CWO) in patients with ankylosing spondylitis to determine whether their results differ with regard to several different subjective and objective outcome measures. Objective The aim of this study is to determine whether there is a difference in subjective and objective outcomes when comparing CWO and OWO in patients with ankylosing spondylitis suffering from clinically significant thoracolumbar kyphosis with respect to quality-of-life assessments, complication risks, and the amount of correction of the spine achieved at follow-up. Methods A systematic review was undertaken of articles published up to July 2012. Electronic databases and reference lists of key articles were searched to identify studies comparing effectiveness and safety outcomes between adult patients with ankylosing spondylitis who received closing wedge versus opening wedge osteotomies. Studies that included pediatric patients, polysegmental osteotomies, or revision procedures were excluded. Two independent reviewers assessed the strength of evidence using the GRADE criteria and disagreements were resolved by consensus. Results From a total of 67 possible citations, 4 retrospective cohorts (class of evidence III) met our inclusion criteria and form the basis for this report. No differences in Oswestry Disability Index, visual analog scale for pain, Scoliosis Research Society (SRS)-24 score, SRS-22 score, and patient satisfaction were reported between the closing and opening wedge groups across two studies. Regarding radiological outcomes following closing versus opening osteotomies, mean change in sagittal vertical axis ranged from 8.9 to 10.8 cm and 8.0 to 10.9 cm, respectively, across three studies; mean change in lumbar lordosis ranged from 36 to 47 degrees and 19 to 41 degrees across four studies; and mean change

  3. Relaxation of the MCL after an Open-Wedge High Tibial Osteotomy results in decreasing contact pressures of the knee over time.

    Science.gov (United States)

    van Egmond, N; Hannink, G; Janssen, D; Vrancken, A C; Verdonschot, N; van Kampen, A

    2017-03-01

    The objective of this study was to investigate the effect of a medial open-wedge osteotomy (OWO) and the release of the superficial medial collateral ligament (MCL) on the tibiofemoral cartilage pressure, the MCL tension and the valgus laxity of the knee. Seven fresh-frozen, human cadaveric knees were used. Medial and lateral mean contact pressure (CP), peak contact pressure (peakCP), and contact area (CA) were measured using a pressure-sensitive film (I-Scan; Tekscan, Boston, MA). The MCL tension was measured using a custom-made device. These measurements were continuously recorded for 5 min after an OWO of 10°. After the osteotomy, the valgus laxity was measured with a handheld Newtonmeter. For one knee, the measurements were continued for 24 h. At the end, a complete release of the superficial MCL was performed and the measurements were repeated at 10°. There was relaxation of the MCL after the osteotomy; the tension dropped in 5 min with 10.7% (mean difference 20.5 N (95% CI 16.1-24.9)), and in 24 h, the tension decreased by 24.2% (absolute difference 38.8 N) (one knee). After the osteotomy, the mean CP, peakCP and CA increased in the medial compartment (absolute difference 0.17 MPa (95% CI 0.14-0.20), 0.27 MPa (95% CI 0.24-0.30), 132.9mm(2) (95% CI 67.7-198.2), respectively), and decreased in the lateral compartment (absolute difference 0.02 MPa (95% CI 0.03 -0.01), 0.08 MPa (95% CI 0.11 - 0.04), 47.0 mm(2) (95% CI -105.8 to 11.8), respectively). Only after a release of the superficial MCL, the mean CP, peak CP and CA significantly decreased in the medial compartment (absolute difference 0.17, 0.27 MPa, 119.8 mm(2), respectively), and increased in the lateral compartment (absolute difference 0.02, 0.11 MPa, 52.4 mm(2), respectively). After the release of the superficial MCL, a mean increase of 7.9° [mean difference - 0.1° (95% CI -1.9 to 1.6)] of the valgus laxity was found. A release of the superficial MCL helps achieve the goal of

  4. Open-wedge osteotomy using an internal plate fixator in patients with medial-compartment gonarthritis and varus malalignment

    DEFF Research Database (Denmark)

    Niemeyer, Philipp; Schmal, Hagen; Hauschild, Oliver

    2010-01-01

    PURPOSE: Our purpose was to evaluate the 3-year clinical results of patients with medial-compartment osteoarthritis of the knee and varus malalignment who underwent open-wedge high tibial osteotomy (HTO) with an internal plate fixator (TomoFix; Synthes, Solothurn, Switzerland). Clinical results...... of patients reported discomfort related to the implant at some point during the follow-up period (40.6%). CONCLUSIONS: Open-wedge osteotomy by use of the TomoFix system leads to reliable 3-year results. Results do not depend on the severity of medial cartilage defects, whereas partial-thickness defects...

  5. Distal femoral varus osteotomy: problems associated with the lateral open-wedge technique.

    Science.gov (United States)

    Jacobi, Matthias; Wahl, Peter; Bouaicha, Samy; Jakob, Roland P; Gautier, Emanuel

    2011-06-01

    Varisation osteotomies on the distal femur are an established treatment method for valgus osteoarthritis of the knee in younger patients. Osteotomy can be done in a lateral open-wedge or medial closed-wedge manner. We retrospectively studied 14 patients treated by the lateral open-wedge technique, fixed with the Tomofix plate, with a mean duration of follow-up of 45 ± 3.4 months. We observed often delayed osteotomy healing after 3, 6 and 12 months, no secondary dislocations, and frequent troublesome irritation due to the plate being on the iliotibial band. However, outcome was satisfactory once the osteotomy healed and the plate was removed. Based on the often slow healing of the osteotomy and frequent irritation due to the plate, this procedure has been abandoned by the authors, and the medial closing-wedge osteotomy adopted as the alternative treatment.

  6. Open wedge metatarsal osteotomy versus crescentic osteotomy to correct severe hallux valgus deformity

    DEFF Research Database (Denmark)

    Wester, Jens Ulrik; Hamborg-Petersen, Ellen; Herold, Niels

    2016-01-01

    BACKGROUND: Different techniques of proximal osteotomies have been introduced to correct severe hallux valgus. The open wedge osteotomy is a newly introduced method for proximal osteotomy. The aim of this prospective randomized study was to compare the radiological and clinical results after...... operation for severe hallux valgus, comparing the open wedge osteotomy to the crescentic osteotomy which is our traditional treatment. METHODS: Forty-five patients with severe hallux valgus (hallux valgus angle >35̊, and intermetatarsal angle >15̊) were included in this study. The treatment was proximal...... open wedge osteotomy and fixation with plate (Hemax), group 1, or operation with proximal crescentic osteotomy and fixation with a 3mm cannulated screw, group 2. The mean age was 52 years (19-71). Forty-one females and four males were included. Clinical and radiological follow-ups were performed 4...

  7. Proximal first metatarsal opening wedge osteotomy: geometric analysis on saw bone models.

    Science.gov (United States)

    Kugan, R; Currall, V A; Johal, P; Clark, C I C

    2015-03-01

    For hallux valgus correction, distal first metatarsal osteotomy is generally used for minor to moderate deformities, diaphyseal osteotomy for moderate deformities and basal osteotomy or arthrodesis for severe deformities. With the advent of locking plates, there has been renewed interest in opening wedge basal osteotomy. We undertook this study in order to understand the power and limitations of this osteotomy. Proximal opening wedge osteotomies were performed on saw bone models in four orientations, with three different wedge sizes: (1) perpendicular to the ground (PG); (2) perpendicular to the shaft (PS); (3) perpendicular to shaft with 30° declination (DEC); (4) 30° oblique (OB). Pre- and post-osteotomy measurements were made of axial and plantar translation and inter-metatarsal angle. Plantar translation and intermetatarsal angle correction increased with increasing wedge size. The DEC osteotomy produced the greatest increase in length of metatarsal shaft, while the PS osteotomy gave the least. The most plantar translation was achieved with the DEC osteotomy. Overall, the PS osteotomy gave the largest correction of the intermetatarsal angle. Although there are several published clinical case series of the proximal opening wedge osteotomy, this is the first study to fully evaluate its geometry. Copyright © 2014 Elsevier Ltd. All rights reserved.

  8. Measurement of photoneutron dose produced by wedge filters of a high energy linac using polycarbonate films.

    Science.gov (United States)

    Hashemi, Seyed Mehdi; Hashemi-Malayeri, Bijan; Raisali, Gholamreza; Shokrani, Parvaneh; Sharafi, Ali Akbar; Torkzadeh, Falamarz

    2008-05-01

    Radiotherapy represents the most widely spread technique to control and treat cancer. To increase the treatment efficiency, high energy linacs are used. However, applying high energy photon beams leads to a non-negligible dose of neutrons contaminating therapeutic beams. In addition, using conventional linacs necessitates applying wedge filters in some clinical conditions. However, there is not enough information on the effect of these filters on the photoneutrons produced. The aim of this study was to investigate the change of photoneutron dose equivalent due to the use of linac wedge filters. A high energy (18 MV) linear accelerator (Elekta SL 75/25) was studied. Polycarbonate films were used to measure the dose equivalent of photoneutrons. After electrochemical etching of the films, the neutron dose equivalent was calculated using Hp(10) factor, and its variation on the patient plane at 0, 5, 10, 50 and 100 cm from the center of the X-ray beam was determined. By increasing the distance from the center of the X-ray beam towards the periphery, the photoneutron dose equivalent decreased rapidly for the open and wedged fields. Increasing of the field size increased the photoneutron dose equivalent. The use of wedge filter increased the proportion of the neutron dose equivalent. The increase can be accounted for by the selective absorption of the high energy photons by the wedge filter.

  9. The efficacy of open-wedge high tibial osteotomy for varus knee%开放胫骨高位楔形截骨术治疗膝关节内翻畸形

    Institute of Scientific and Technical Information of China (English)

    张海宁; 冷萍; 王英振; 吕成昱; 王湘达; 王昌耀

    2010-01-01

    sixteen weeks after operation. No complications such as plate broken or injury of nerve or blood vessel had occurred. The mean correct angle was 9. 5°. No degenerative changes had developed in other compartments of the knee. The mechanical axis of the lower extremities was maintained during the follow-up. The overall satisfactory rate was 83.3%.Statistically significant changes exist in the Lysholm score and varus degree. Conclusion The open-wedge high tibial osteotomy is suitable for the symptomatic genu varum in younger patients with good short-term and mid-term results.

  10. Numerical study on flow rate limitation of open capillary channel flow through a wedge

    Directory of Open Access Journals (Sweden)

    Ting-Ting Zhang

    2016-04-01

    Full Text Available The flow characteristics of slender-column flow in wedge-shaped channel under microgravity condition are investigated in this work. The one-dimensional theoretical model is applied to predict the critical flow rate and surface contour of stable flow. However, the one-dimensional model overestimates the critical flow rate for not considering the extra pressure loss. Then, we develop a three-dimensional simulation method with OpenFOAM, a computational fluid dynamics tool, to simulate various phenomena in wedge channels with different lengths. The numerical results are verified with the capillary channel flow experimental data on the International Space Station. We find that the three-dimensional simulation perfectly predicts the critical flow rates and surface contours under various flow conditions. Meanwhile, the general behaviors in subcritical, critical, and supercritical flow are studied in three-dimensional simulation considering variations of flow rate and open channel length. The numerical techniques for three-dimensional simulation is validated for a wide range of configurations and is hopeful to provide valuable guidance for capillary channel flow experiment and efficient liquid management in space.

  11. Modified closing-opening wedge osteotomy for the treatment of sagittal malalignment in thoracolumbar fractures malunion.

    Science.gov (United States)

    Bourghli, Anouar; Boissière, Louis; Vital, Jean-Marc; Bourghli, Mohamed Aiman; Almusrea, Khaled; Khoury, Ghassan; Obeid, Ibrahim

    2015-12-01

    Many techniques have been described for the surgical treatment of rigid posttraumatic thoracolumbar kyphosis, but none is well adapted to the modified shape of the wedged vertebra. The study aimed to describe the modified closing-opening wedge osteotomy (MCOWO), a new osteotomy technique that adapts to the triangular shape of the wedged apical vertebra of the deformity. A retrospective assessment of the degree of correction before and after the MCOWO was carried out. Ten patients presenting rigid posttraumatic thoracolumbar kyphosis were enrolled in this study. We used preoperative and postoperative whole spine radiographs to assess the sagittal plane parameters, and computed tomography scan for measurement of the vertebral segment height at the osteotomy level, spinal cord length, aorta length, and fusion rate. Ten patients underwent the MCOWO at T12 or L1. The procedure involves removing the postero-superior triangular corner of the wedged vertebra and transforming it to a shape similar to a trapezoid. The patients' mean age was 36.6±7.5 years, the mean time between the fracture and the surgery was 12.2±5.6 months, and the mean follow-up was 30.6±5 months. In all patients, statistically significant improvement was observed in the sagittal plane after surgery. The thoracolumbar angle improved from 52±6° preoperatively to 7.1±5.7° at the last follow-up. Mean osteotomy angle was 38.1±2.6°, mean spinal cord shortening was 1.2±0.2 cm, and mean aorta lengthening was 2.3±0.4 cm. All the patients showed complete fusion at 2 years, and none required revision surgery. Two patients presented a temporary unilateral weakness that recovered completely within 3 months after the surgery. The MCOWO is an interesting procedure for patients with posttraumatic thoracolumbar kyphosis. The modified osteotomy is adapted to the modified shape of the compressed vertebra. Spinal cord shortening and aorta lengthening were well tolerated in all patients. Copyright © 2015

  12. Distal femoral opening-wedge osteotomy for lateral compartment osteoarthritis of the knee

    Directory of Open Access Journals (Sweden)

    Dirk HPW Das

    2008-11-01

    Full Text Available Dirk HPW Das1, Thea Sijbesma2, Henk J Hoekstra2, Willem M van Leeuwen21Department of Orthopaedics and Traumatology, Máxima Medisch Centrum Veldhoven, The Netherlands; 2Department of Orthopaedic Surgery, The St Anna Hospital, Geldrop, The NetherlandsAbstract: We retrospectively evaluated 12 patients with lateral gonarthritis after a distal femoral lateral opening osteotomy using a Puddu-plate. Thirteen patients with lateral gonarthritis and genu valgum were operated upon. One patient died during follow-up. We used the Lysholm score and the adapted Hospital for Special Surgery (HSS clinical and functional score. At 34 months follow up, all patients had a functional and clinical evaluation. All patients responded to a questionnaire over the telephone regarding the survival, Lysholm, and functional HSS score at 74 months follow-up. The average age at operation was 52 years. The average correction angle was 11° (16° to 5°. At 34 months follow up, the functional HSS score improved from 58 to 72 points. At 74 months follow up, the Lysholm score improved from 64 to 77 points. The clinical horizon scanning system score improved from 42 points presurgery to 64 postsurgery. Two knees were converted to total knee arthroplasty due to persisting postoperative pain. Lateral supracondylar opening-wedge osteotomy is a satisfying treatment for lateral osteoarthritis of the knee with genu valgum in younger patients.Keywords: lateral gonarthritis, femoral osteotomy, Lysholm score, knee

  13. First metatarsal proximal opening wedge osteotomy for correction of hallux valgus deformity: comparison of straight versus oblique osteotomy.

    Science.gov (United States)

    Han, Seung Hwan; Park, Eui Hyun; Jo, Joon; Koh, Yong Gon; Lee, Jin Woo; Choi, Woo Jin; Kim, Yong Sang

    2015-05-01

    The aim of this study was to compare clinical and radiographic outcomes of proximal opening wedge osteotomy using a straight versus oblique osteotomy. We retrospectively reviewed 104 consecutive first metatarsal proximal opening wedge osteotomies performed in 95 patients with hallux valgus deformity. Twenty-six feet were treated using straight metatarsal osteotomy (group A), whereas 78 feet were treated using oblique metatarsal osteotomy (group B). The hallux valgus angle (HVA), intermetatarsal angle (IMA), distal metatarsal articular angle, and distance from the first to the second metatarsal (distance) were measured for radiographic evaluation, whereas the American Orthopaedic Foot and Ankle Society (AOFAS) forefoot score was used for clinical evaluation. Significant corrections in the HVA, IMA, and distance from the first to the second metatarsal were obtained in both groups at the last follow-up (posteotomy, an oblique first metatarsal osteotomy yielded better clinical and radiological outcomes.

  14. Open wedge metatarsal osteotomy versus crescentic osteotomy to correct severe hallux valgus deformity - A prospective comparative study.

    Science.gov (United States)

    Wester, Jens Ulrik; Hamborg-Petersen, Ellen; Herold, Niels; Hansen, Palle Bo; Froekjaer, Johnny

    2016-03-01

    Different techniques of proximal osteotomies have been introduced to correct severe hallux valgus. The open wedge osteotomy is a newly introduced method for proximal osteotomy. The aim of this prospective randomized study was to compare the radiological and clinical results after operation for severe hallux valgus, comparing the open wedge osteotomy to the crescentic osteotomy which is our traditional treatment. Forty-five patients with severe hallux valgus (hallux valgus angle >35̊, and intermetatarsal angle >15̊) were included in this study. The treatment was proximal open wedge osteotomy and fixation with plate (Hemax), group 1, or operation with proximal crescentic osteotomy and fixation with a 3mm cannulated screw, group 2. The mean age was 52 years (19-71). Forty-one females and four males were included. Clinical and radiological follow-ups were performed 4 and 12 months after the operation. In group 1 the hallux valgus angle decreased from 39.0̊ to 24.1̊ after 4 months and 27.9̊ after 12 months. In group 2 the angle decreased from 38.3̊ to 21.4̊ after 4 months and 27.0̊ after 12 months. The intermetatarsal angle in group 1 was 19.0̊ preoperatively, 11.6̊ after 4 months and 12.6̊ after 12 months. In group 2 the mean intermetatarsal angle was 18.9̊ preoperatively, 12.0̊ after 4 months and 12.6̊ after 12 months. The AOFAS score improved from 59.3 to 81.5 in group 1 and from 61.8 to 84.8 in group 2 respectively measured 12 months postoperatively. The relative length of the 1 metatarsal compared to 2 metatarsal bone was 0.88 and 0.87 preoperatively and 0.88 and 0.86 for group 1 and 2 respectively measured after 12 months. Crescentic osteotomy and open wedge osteotomy improve AOFAS score and VAS scores on patients operated with severe hallux valgus. No significant difference was found in the two groups looking at the postoperative improvement of HVA and IMA measured 4 and 12 months postoperatively. The postoperative VAS score and AOFAS score were

  15. A fully integrated high-Q Whispering-Gallery Wedge Resonator

    CERN Document Server

    Ramiro-Manzano, F; Pavesi, L; Pucker, G; Ghulinyan, M

    2012-01-01

    Microresonator devices which posses ultra-high quality factors are essential for fundamental investigations and applications. Microsphere and microtoroid resonators support remarkably high Q's at optical frequencies, while planarity constrains preclude their integration into functional lightwave circuits. Conventional semiconductor processing can also be used to realize ultra-high-Q's with planar wedge-resonators. Still, their full integration with side-coupled dielectric waveguides remains an issue. Here we show the full monolithic integration of a wedge-resonator/waveguide vertically-coupled system on a silicon chip. In this approach the cavity and the waveguide lay in different planes. This permits to realize the shallow-angle wedge while the waveguide remains intact, allowing therefore to engineer a coupling of arbitrary strength between these two. The precise size-control and the robustness against post-processing operation due to its monolithic integration makes this system a prominent platform for indu...

  16. Wedge Absorbers for Final Cooling for a High-Energy High-Luminosity Lepton Collider

    Energy Technology Data Exchange (ETDEWEB)

    Neuffer, David [Fermilab; Mohayai, Tanaz [IIT, Chicago (main); Snopok, Pavel [IIT, Chicago; Summers, Don [Mississippi U.

    2016-06-01

    A high-energy high-luminosity muon collider scenario requires a "final cooling" system that reduces transverse emittance to ~25 microns (normalized) while allowing longitudinal emittance increase. Ionization cooling using high-field solenoids (or Li Lens) can reduce transverse emittances to ~100 microns in readily achievable configurations, confirmed by simulation. Passing these muon beams at ~100 MeV/c through cm-sized diamond wedges can reduce transverse emittances to ~25 microns, while increasing longitudinal emittance by a factor of ~5. Implementation will require optical matching of the exiting beam into downstream acceleration systems.

  17. 用楔子撬开问题%Using a Wedge to Pry Open a Problem

    Institute of Scientific and Technical Information of China (English)

    马提索夫

    2001-01-01

    When I elicited the Pumi word ts6 'wedge' in Kunming (March 1996), I was struck by its resemblance to Lahu jfl 'wedge'. Since the Qiangic languages are not particularly close to Loloish on the TB family tree,this apparent cognate for an item of non-core vocabulary was of interest. The first task in establishing a relationship between the Pumi and the Lahu forms was to reconstruct the PLB ancestor of Lahu jfi. Then possible cognates to the Pumi form in other Qiangic languages had to be examined.Given our present rudimentary knowledge of comparative Qiangic,could parallel examples establish a Proto-Qiangic reconstruction resembling our newly reconstructed PLB form?

  18. Clinical and radiological outcome after mini-open Latarjet technique with fixation of coracoid with Arthrex wedge mini-plate.

    Science.gov (United States)

    Chaudhary, Deepak; Goyal, Ankit; Joshi, Deepak; Jain, Vineet; Mohindra, Mukul; Mehta, Nitin

    2016-01-01

    Technical faults leading to coracoid fractures during screw insertion and coracoid graft osteolysis are concerns with standard screw fixation techniques in Latarjet procedure. The purpose of this study is to share our experience using Arthrex wedge profile plate with mini-open technique for graft fixation, that ensures better load distribution between coracoid graft and glenoid. We did retrospective analysis of 24 patients with recurrent anterior shoulder instability after failed arthroscopic Bankart's repair. Arthroscopic examination of affected shoulder was done in lateral position before making patient supine for open Latarjet. A low profile wedge plate (Arthrex) with two screws was used for the procedure. CT analysis was performed post-operatively at 6 months to see graft union and results were evaluated using the Rowe and Walch Duplay score. Mean follow-up time was 26 months. Postoperatively, mean forward elevation was 170.6 + 4.6° (loss of average 5.9°) and mean external rotation was 42.5 + 5.3° (loss of average 3.1°). All patients returned to their previous occupation. None reported to be having any recurrent subluxation. Functional assessment done using Rowe score and Walch Duplay score showed statistically significant improvement (p value 0.034). There were no implant-related complications and no case of coracoid graft osteolysis. Mini-open Latarjet with graft fixation with Arthrex mini-plate provides satisfactory outcome in patients who require reoperation due to dramatic bone loss and failed soft tissue reconstruction. The modified incision improves exposure enabling plate fixation and the secure fixation accelerates rehabilitation.

  19. First Metatarsophalangeal Contact Properties Following Proximal Opening Wedge and Scarf Osteotomies for Hallux Valgus Correction: A Biomechanical Study.

    Science.gov (United States)

    Kia, Cameron; Yoshida, Ryu; Cote, Mark; DiVenere, Jessica; Geaney, Lauren E

    2017-04-01

    Proximal opening wedge osteotomy (POWO) is an established procedure for moderate to severe hallux valgus. A common concern of this procedure is that it results in lengthening of the first metatarsal, which could cause increased intra-articular pressure of the first metatarsophalangeal joint (MTP) and may ultimately lead to arthritis because of these altered mechanics. The purpose of this study was to use a cadaveric model to compare intra-articular pressures and articulating contact properties of the MTP joint following either scarf osteotomy or POWO. Fresh-frozen cadaveric below-knee specimens with pre-existing hallux valgus (n = 12) and specimens without hallux valgus (n = 6, control group) were used. The hallux valgus specimens were stratified into 2 groups (n = 6 each): POWO or scarf osteotomy. The groups were matched based on the degree of deformity. Peak intra-articular pressure, force, and area were measured in all normal, preoperative, and postoperative specimens with a simulated weightbearing model. These measurements were made with a pressure transducer placed within the first MTP joint. Postoperatively POWO group had slightly higher contact forces and pressures compared to the scarf group and lower contact forces and pressures than those of the normal group but were not statistically significant ( P > .05). Normal specimens had higher intra-articular force, pressure, and area than postoperative specimens but the difference was not found to be significant. First metatarsal lengthening was found in both the scarf and POWO specimens; however, neither increase was found to be significant ( P > .05). The results from this study show that after operative correction, contact properties of the fist MTP joint among normal, POWO, and scarf osteotomy groups revealed no significant differences. First MTP joints in those with hallux valgus had significantly lower contact force and pressure compared to those without hallux valgus. With little long-term outcomes of

  20. Dehydration of chlorite explains anomalously high electrical conductivity in the mantle wedges.

    Science.gov (United States)

    Manthilake, Geeth; Bolfan-Casanova, Nathalie; Novella, Davide; Mookherjee, Mainak; Andrault, Denis

    2016-05-01

    Mantle wedge regions in subduction zone settings show anomalously high electrical conductivity (~1 S/m) that has often been attributed to the presence of aqueous fluids released by slab dehydration. Laboratory-based measurements of the electrical conductivity of hydrous phases and aqueous fluids are significantly lower and cannot readily explain the geophysically observed anomalously high electrical conductivity. The released aqueous fluid also rehydrates the mantle wedge and stabilizes a suite of hydrous phases, including serpentine and chlorite. In this present study, we have measured the electrical conductivity of a natural chlorite at pressures and temperatures relevant for the subduction zone setting. In our experiment, we observe two distinct conductivity enhancements when chlorite is heated to temperatures beyond its thermodynamic stability field. The initial increase in electrical conductivity to ~3 × 10(-3) S/m can be attributed to chlorite dehydration and the release of aqueous fluids. This is followed by a unique, subsequent enhancement of electrical conductivity of up to 7 × 10(-1) S/m. This is related to the growth of an interconnected network of a highly conductive and chemically impure magnetite mineral phase. Thus, the dehydration of chlorite and associated processes are likely to be crucial in explaining the anomalously high electrical conductivity observed in mantle wedges. Chlorite dehydration in the mantle wedge provides an additional source of aqueous fluid above the slab and could also be responsible for the fixed depth (120 ± 40 km) of melting at the top of the subducting slab beneath the subduction-related volcanic arc front.

  1. Three Years of High Resolution Year-Round Monitoring of Ice-Wedge Thermal Contraction Cracking in Svalbard

    Science.gov (United States)

    Christiansen, H. H.

    2006-12-01

    Most likely ice-wedges are the most widespread periglacial landform in lowlands with continuous permafrost. With a changing climate it is important to understand better the geomorphological processes controlling ice- wedge growth and decay, as they might cause large changes to the surface of the landscape, particularly if the active layer thickness increases causing melting of the most ice-rich permafrost top layer. As most settlements on permafrost are located in lowland areas, ice-wedge formation can also influence the infrastructure. Understanding the processes of ice-wedge growth and their thaw transformation into ice-wedge casts are essential when using contemporary ice wedges as analogues of Pleistocene thermal contraction cracking in palaeoenvironmental reconstructions. As ice-wedges are largely controlled by winter conditions, improved understanding of the factors controlling their growth will enable better palaeoclimatic reconstructions both directly from ice-wedges, but also from ice-wedge casts, than just mean winter temperatures. Detailed studies of ice-wedge dynamics, including quantification of movement, have only been done in very few places in the Arctic. In high arctic Svalbard at 78°N climate at sea level locates these islands close to the southern limit of the continuous permafrost zone, with MAAT of as much as -4 to -6°C. However, thermal contraction cracking is demonstrated to be widespread in the Adventdalen study area in Svalbard. The year-round field access from the University Centre in Svalbard, UNIS, has enabled the collection of different continuous or high frequency ice-wedge process monitoring data since 2002 to improve the understanding of the geomorphological activity of this landform. In all the winters the air temperature was below -30°C for shorter or longer periods. During all the winters, the temperature in the top permafrost was below -15°C both in the ice-wedge top for shorter or longer periods. The snow cover was

  2. Optimal clinical implementation of the Siemens virtual wedge.

    Science.gov (United States)

    Walker, C P; Richmond, N D; Lambert, G D

    2003-01-01

    Installation of a modern high-energy Siemens Primus linear accelerator at the Northern Centre for Cancer Treatment (NCCT) provided the opportunity to investigate the optimal clinical implementation of the Siemens virtual wedge filter. Previously published work has concentrated on the production of virtual wedge angles at 15 degrees, 30 degrees, 45 degrees, and 60 degrees as replacements for the Siemens hard wedges of the same nominal angles. However, treatment plan optimization of the dose distribution can be achieved with the Primus, as its control software permits the selection of any virtual wedge angle from 15 degrees to 60 degrees in increments of 1 degrees. The same result can also be produced from a combination of open and 60 degrees wedged fields. Helax-TMS models both of these modes of virtual wedge delivery by the wedge angle and the wedge fraction methods respectively. This paper describes results of timing studies in the planning of optimized patient dose distributions by both methods and in the subsequent treatment delivery procedures. Employment of the wedge fraction method results in the delivery of small numbers of monitor units to the beam's central axis; therefore, wedge profile stability and delivered dose with low numbers of monitor units were also investigated. The wedge fraction was proven to be the most efficient method when the time taken for both planning and treatment delivery were taken into consideration, and is now used exclusively for virtual wedge treatment delivery in Newcastle. It has also been shown that there are no unfavorable dosimetric consequences from its practical implementation.

  3. High tibial closing wedge osteotomy for medial compartment osteoarthrosis of knee

    Directory of Open Access Journals (Sweden)

    Tuli S

    2008-01-01

    Full Text Available Background: Most patients of symptomatic osteoarthrosis of knee are associated with varus malalignment that is causative or contributory to painful arthrosis. It is rational to correct the malalignment to transfer the functional load to the unaffected or less affected compartment of the knee to relieve symptoms. We report the outcome of a simple technique of high tibial osteotomy in the medial compartment of osteoarthrosis of the knee. Materials and Methods: Between 1996 and 2004 we performed closing wedge osteotomy in 78 knees in 65 patients. The patients selected for osteotomy were symptomatic essentially due to medial compartment osteoarthrosis associated with moderate genu varum. Of the 19 patients who had bilateral symptomatic disease 11 opted for high tibial osteotomy of their second knee 1-3 years after the first operation. Preoperative grading of osteoarthrosis and postoperative function was assessed using Japanese Orthopaedic Association (JOA rating scale. Results: At a minimum follow-up of 2 years (range 2-9 years 6-10° of valgus correction at the site of osteotomy was maintained, there was significant relief of pain while walking, negotiating stairs, squatting and sitting cross-legged. Walking distance in all patients improved by two to four times their preoperative distance of 200-400 m. No patient lost any preoperative knee function. The mean JOA scoring improved from preoperative 54 (40-65 to 77 (55-85 at final follow-up. Conclusion: Closing wedge high tibial osteotomy performed by our technique can be undertaken in any setup with moderate facilities. Operation related complications are minimal and avoidable. Kirschner wire fixation is least likely to interfere with replacement surgery if it becomes necessary.

  4. A 5° medial wedge reduces frontal but not saggital plane motion during jump landing in highly trained women athletes

    Directory of Open Access Journals (Sweden)

    Michael F Joseph

    2010-03-01

    Full Text Available Michael F Joseph1, Craig R Denegar1, Elaine Horn1, Bradley MacDougall1, Michael Rahl1, Jessica Sheehan1, Thomas Trojian2, Jeffery M Anderson1, James E Clark1, William J Kraemer11Department of Kinesiology, 2Department of Sports Medicine, University of Connecticut, Storrs, CT, USAAbstract: Lower extremity mechanics during landing have been linked to traumatic and nontraumatic knee injuries, particularly in women’s athletics. The effects of efforts to mitigate these risks have not been fully elucidated. We previously reported that a 5° medial wedge reduced ankle eversion and knee valgus. In the present report we further investigated the effect of a 5° medial wedge inserted in the shoes of female athletes on frontal plane hip motion, as well as ankle, knee, hip, and trunk saggital plane motion during a jump landing task. Kinematic data were obtained from 10 intercollegiate female athletes during jump landings from a 31 cm platform with and without a 5° medial wedge. Hip adduction was reduced 1.98° (95% CI 0.97–2.99° by the medial wedge but saggital plane motions were unaffected. A 5° medial wedge reduces frontal plane motion and takes the knee away from a position associated with anterior cruciate ligament injury and patellofemoral pain syndrome. Although frontal plane motion was not captured it is unlikely to have increased in a bilateral landing task. Thus, it is likely that greater muscle forces were generated in these highly trained athletes to dissipate ground reaction forces when a medial wedge was in place. Additional investigation in younger and lesser trained athletes is warranted to assess the impact of orthotic devices on knee joint mechanics.Keywords: jump landing, foot orthotic, lower extremity kinematics, knee biomechanics, knee injury

  5. The role of subducting bathymetric highs on the oceanic crust to deformation of accretionary wedge and earthquake segmentation in the Java forearc

    Science.gov (United States)

    Singh, S. C.; Mukti, M.; Deighton, I.

    2014-12-01

    Stratigraphic and structural observations of newly acquired seismic reflection data along the offshore south Java reveal the structural style of deformation along the forearc and the role of subducting bathymetric highs to the morphology of the forearc region. The forearc region can be divided in to two major structural units: accretionary wedge and forearc and forearc basin where a backthrust marks the boundary between the accretionary wedge and the forearc basin sediments. The continuous compression in the subduction zone has induced younger landward-vergent folds and thrusts within the seaward margin of the forearc basin sediments, which together with the backthrust is referred as the Offshore South Java Fault Zone (OSJFZ), representing the growth of the accretionary wedge farther landward. Seaward-vergent imbricated thrusts have deformed the sediments in the accretionary wedge younging seaward, and have developed fold-thrust belts in the accretionary wedge toward trench. Together with the backthrusts, these seaward-vergent thrusts characterize the growth of accretionary wedge in South of Java trench. Based on these new results, we suggest that accretionary wedge mechanic is not the first order factor in shaping the morphology of the accretionary wedge complex. Instead the subducting bathymetric highs play the main role in shaping the forearc that are manifested in the uplift of the forearc high and intense deformation along the OSJFZ. These subducting highs also induce compression within the accretionary sediments, evident from landward deflection of the subduction front at the trench and inner part of accretionary wedge in the seaward margin of the forearc basin. Intense deformation is also observed on the seaward portion of the accretionary wedge area where the bathymetric highs subducted. We suggest that these subducted bathymetric features define the segment boundaries for megathrust earthquakes, and hence reducing the maximum size of the earthquakes in the

  6. Early age stress-crack opening relationships for high performance concrete

    DEFF Research Database (Denmark)

    Østergaard, Lennart; Lange, David A.; Stang, Henrik

    2004-01-01

    Stress–crack opening relationships for concrete in early age have been determined for two high performance concrete mixes with water to cementitious materials ratios of 0.307 and 0.48. The wedge splitting test setup was used experimentally and the cracked nonlinear hinge model based on the fictit...

  7. Rethinking wedges

    Science.gov (United States)

    Davis, Steven J.; Cao, Long; Caldeira, Ken; Hoffert, Martin I.

    2013-03-01

    Abstract Stabilizing CO2 emissions at current levels for fifty years is not consistent with either an atmospheric CO2 concentration below 500 ppm or global temperature increases below 2 °C. Accepting these targets, solving the climate problem requires that emissions peak and decline in the next few decades, and ultimately fall to near zero. Phasing out emissions over 50 years could be achieved by deploying on the order of 19 'wedges', each of which ramps up linearly over a period of 50 years to ultimately avoid 1 GtC y-1 of CO2 emissions. But this level of mitigation will require affordable carbon-free energy systems to be deployed at the scale of tens of terawatts. Any hope for such fundamental and disruptive transformation of the global energy system depends upon coordinated efforts to innovate, plan, and deploy new transportation and energy systems that can provide affordable energy at this scale without emitting CO2 to the atmosphere. 1. Introduction In 2004, Pacala and Socolow published a study in Science arguing that '[h]umanity can solve the carbon and climate problem in the first half of this century simply by scaling up what we already know how to do' [1]. Specifically, they presented 15 options for 'stabilization wedges' that would grow linearly from zero to 1 Gt of carbon emissions avoided per year (GtC y-1 1 Gt = 1012 kg) over 50 years. The solution to the carbon and climate problem, they asserted, was 'to deploy the technologies and/or lifestyle changes necessary to fill all seven wedges of the stabilization triangle'. They claimed this would offset the growth of emissions and put us on a trajectory to stabilize atmospheric CO2 concentration at 500 ppm if emissions decreased sharply in the second half of the 21st century. The wedge concept has proven popular as an analytical tool for considering the potential of different technologies to reduce CO2 emissions. In the years since the paper was published, it has been cited more than 400 times, and

  8. Radial wedge flange clamp

    Science.gov (United States)

    Smith, Karl H.

    2002-01-01

    A radial wedge flange clamp comprising a pair of flanges each comprising a plurality of peripheral flat wedge facets having flat wedge surfaces and opposed and mating flat surfaces attached to or otherwise engaged with two elements to be joined and including a series of generally U-shaped wedge clamps each having flat wedge interior surfaces and engaging one pair of said peripheral flat wedge facets. Each of said generally U-shaped wedge clamps has in its opposing extremities apertures for the tangential insertion of bolts to apply uniform radial force to said wedge clamps when assembled about said wedge segments.

  9. Avaliação radiográfica da osteotomia proximal de abertura gradual da tíbia Radiographic assessment of the opening wedge proximal tibial osteotomy

    Directory of Open Access Journals (Sweden)

    Carlos Francisco Bittencourt Silva

    2010-01-01

    significant differences between the pre- and post-operative indices of tibial slope and patellar height in the patients were found. CONCLUSION: Opening wedge proximal tibial osteotomy is a technique that avoids the problems presented by high tibial osteotomy, as it is done without promoting changes in the extensor mechanism, ligament imbalance or deformities in the proximal tibia.

  10. Commissioning, clinical implementation and quality assurance of Siemen's Virtual Wedge.

    Science.gov (United States)

    Rathee, S; Kwok, C B; MacGillivray, C; Mirzaei, M

    1999-01-01

    This report presents the results of commissioning, clinical implementation and quality assurance of Siemens Virtual Wedge. Our measurements show that: (1) wedge factors are within 2% of unity, (2) percentage depth doses are within 1% of open beam data, and (3) wedged beam profiles can be modeled similarly to a physical wedge and follow a well defined equation to facilitate modeling of an arbitrary wedge angle. The gantry angle dependence of wedge profiles is similar to open beam profiles. The output of wedged fields is linear with delivered monitor units within 1%. Quality assurance results indicate the wedge profiles are very stable over time. Day to day variations of two points measured along the wedge gradient direction are within 1.5%.

  11. The use of recombinant human bone morphogenetic protein-2 for the treatment of a delayed union following femoral neck open-wedge osteotomy

    Directory of Open Access Journals (Sweden)

    Axel W.A. Baltzer

    2012-03-01

    Full Text Available Although the clinical potential of bone morphogenetic proteins (BMPs has been known for decades, their use in humans has only been approved for a limited number of orthopaedic conditions. Promising results in animals demonstrate the utility of BMP-2 in regional bone repair without using osteoconductors. To our knowledge, no comparable human case has been described. We report the case of a 50- year-old who suffered a femoral neck fracture. After 9 months of extensive treatment, he was still not pain-free. The following open-wedge osteotomy resulted in a therapy-resistant delayed union. We therefore conducted 4 computer tomography-guided injections of recombinant human (rh BMP-2 into the bone gap. No osteoconductor was employed. Six weeks later, there was a 55-60% defect filling. Followup examination showed a complete union of the bone defect. Our case report shows that in a complicated delayed union rhBMP-2 can be successfully used to induce bone formation without any osteoconductor.

  12. Suppressing the preferential σ-polarization oscillation in a high power Nd∶YVO4 laser with wedge laser crystal

    Institute of Scientific and Technical Information of China (English)

    Zheng Yao-Hui; Zhou Hai-Jun; Wang Ya-Jun; Wu Zhi-Qiang

    2013-01-01

    We observe the phenomenon of priority oscillation of the unexpected σ-polarization in high-power Nd∶YVO4 ring laser.The severe thermal lens of the σ-polarized lasing,compared with the π-polarized lasing,is the only reason for the phenomenon.By designing a wedge Nd∶YVO4 crystal as the gain medium,the unexpected σ-polarization is completely suppressed in the entire range of pump powers,and the polarization stability of the expected π-polarized output is enhanced.With the output power increasing from threshold to the maximum power,no σ-polarization lasing is observed.As a result,25.3 W of stable single-frequency laser output at 532 nm is experimentally demonstrated.

  13. Progression of medial compartmental osteoarthritis 2-8 years after lateral closing-wedge high tibial osteotomy.

    Science.gov (United States)

    Huizinga, M R; Gorter, J; Demmer, A; Bierma-Zeinstra, S M A; Brouwer, R W

    2016-07-07

    The primary purpose of this study is to investigate the progression of medial osteoarthritis (OA) following lateral closing-wedge high tibial osteotomy (HTO). Secondary outcomes included functional and pain scores. This prospective cohort study analysed 298 patients treated with lateral closing-wedge HTO surgery for medial compartmental OA. OA progression was measured by comparing the minimum joint space width (mJSW) and Kellgren-Lawrence (KL) score on radiographs preoperatively and postoperatively. The WOMAC score and NRS score for pain were obtained preoperatively and postoperatively to assess secondary outcomes. Failure was defined as revision surgery; survival was estimated. Mean follow-up was 5.2 ± 1.8 years (range 2-8.5). Mean preoperative mJSW was 3.4 ± 1.6 mm, which changed nonsignificantly (p = 0.51) to 3.4 ± 1.7 mm postoperatively. Mean annual joint space narrowing was 0.02 ± 0.34 mm/year. Progression to 1 KL grade or more was seen in 132 (44 %) patients, and annual risk of KL progression was 8.6 %. No KL progression was seen in 56 % of patients. Mean NRS decreased from 7.3 ± 1.5 to 3.5 ± 2.5 (p < 0.001). WOMAC scores decreased from 48.0 ± 17.2 to 23.6 ± 19.7 (p < 0.001). Failure was seen in 21 patients. Compared to demographic data in the literature, valgus high tibial osteotomy seems to reduce the progression of OA, reduces pain and improves knee function in patients with medial compartment OA and a varus alignment. III.

  14. Evaluation of a high-precision gear measuring machine for helix measurement using helix and wedge artifacts

    Science.gov (United States)

    Taguchi, Tetsuya; Kondo, Yohan

    2016-08-01

    High-precision gears are required for advanced motion and power transmission. The reliability of the measured value becomes important as the gear accuracy increases, and the establishment of a traceability system is needed. Therefore, a high-precision gear measuring machine (GMM) with a smaller uncertainty is expected to improve the gear calibration uncertainty. For this purpose, we developed a prototype of a high-precision GMM that adopts a direct drive mechanism and other features. Then, the high measurement capability of the developed GMM was verified using gear artifacts. Recently, some new measurement methods using simple shapes such as spheres and planes have been proposed as standards. We have verified the tooth profile measurement using a sphere artifact and reported the results that the developed GMM had a high capability in tooth profile measurement. Therefore, we attempted to devise a new evaluation method for helix measurement using a wedge artifact (WA) whose plane was treated as the tooth flank, and the high measurement capability of the developed GMM was verified. The results will provide a part of information to fully assess measurement uncertainty as our future work. This paper describes the evaluation results of the developed GMM for helix measurement using both a helix artifact and the WA, and discusses the effectiveness of the WA as a new artifact to evaluate the GMMs.

  15. Wedge wetting by electrolyte solutions

    Science.gov (United States)

    Mußotter, Maximilian; Bier, Markus

    2017-09-01

    The wetting of a charged wedgelike wall by an electrolyte solution is investigated by means of classical density functional theory. As in other studies on wedge wetting, this geometry is considered as the most simple deviation from a planar substrate, and it serves as a first step toward more complex confinements of fluids. By focusing on fluids containing ions and surface charges, features of real systems are covered that are not accessible within the vast majority of previous theoretical studies concentrating on simple fluids in contact with uncharged wedges. In particular, the filling transition of charged wedges is necessarily of first order, because wetting transitions of charged substrates are of first order and the barrier in the effective interface potential persists below the wetting transition of a planar wall; hence, critical filling transitions are not expected to occur for ionic systems. The dependence of the critical opening angle on the surface charge, as well as the dependence of the filling height, of the wedge adsorption, and of the line tension on the opening angle and on the surface charge are analyzed in detail.

  16. Structure of turbulent wedges created by isolated surface roughness

    Science.gov (United States)

    Kuester, Matthew S.; White, Edward B.

    2016-04-01

    Isolated surface roughness in a laminar boundary layer can create a wedge of turbulence that spreads laterally into the surrounding laminar flow. Some recent studies have identified high- and low-speed streaks along the exterior of turbulent wedges. In this experiment, developing turbulent wedges are measured to observe the creation of these streaks. Naphthalene shear stress surface visualization and hotwire measurements are utilized to investigate the details of turbulent wedges created by cylinders in a laminar flat-plate boundary layer. Both the surface visualization and the hotwire measurements show high- and low-speed streaks in the wake of the cylinder that devolve into a turbulent wedge. The turbulent wedge spreading is associated with the emergence of these high- and low-speed streaks along the outside of the wedge. As the wedge evolves in the streamwise direction, these streaks persist inside of the core of the wedge, while new, lower amplitude streaks form along the outside of the wedge. Adding asymmetry to the cylinder moved the virtual origin closer to the roughness and increased the vortex shedding frequency, while adding small-scale roughness features did not strongly affect turbulent wedge development. Intermittency calculations additionally show the origin of the turbulent core inside of the wedge. The structure and spacing of the high-speed streaks along the extremities of the turbulent wedge give insight into the spreading angle of the turbulent wedge.

  17. Geometry and kinematics of extensional structural wedges

    Science.gov (United States)

    Gui, Baoling; He, Dengfa; Zhang, Yongsheng; Sun, Yanpeng; Huang, Jingyi; Zhang, Wenjun

    2017-03-01

    Structural wedges in the compressive environment have been recognized and studied in different locations. However, extension structural wedges are less well-understood. Based on the normal fault-bend folding theory and inclined shear model, this paper quantitatively analyses deformations related to extensional structural wedges and builds a series of geometric models for them. An extensional structural wedge is a fault-block held by two or more normal faults, the action of which would fold its overlying strata. Extensional structural wedges of different shapes will lead to different deformation results for the overlying strata, and this paper illustrates both the triangular and quadrangular wedges and their related deformations. This paper also discusses differences between the extensional structural wedges and the normal fault-bend-folding. By analysing two seismic sections from Langfang-Gu'an Sag, East China, this paper provides two natural examples of the triangular and quadrangular extensional structural wedges, where the models can reasonably explain the overlying distinct highs and lows without obvious faults. The establishment of a geometric model of extensional structural wedges can provide reference and theoretical bases for future quantitative analysis of deformations in the extensional environment.

  18. Non-Newtonian viscosity wedge in film formation of EHL

    Institute of Scientific and Technical Information of China (English)

    GUOF.; WONGP.L.

    2001-01-01

    This paper aims to evaluate the action of viscosity wedge in the oil film formation ofEHL at opposite sliding and zero entrainment. Using solvers developed for Newtonian and Eyringfluids, the film formation behavior originating from viscosity wedge is investigated. The numericalsimulation displays that lubricant film formation induced by viscosity wedge is different from that bythe well-known geometrical wedge with entrainment in classic EHL. The numerical analyses showthat at high opposite sliding speed the viscosity wedge acts as a leading role in film formation, thenon-Newtonian effects can have a pronounced influence on action of the viscosity wedge.

  19. High-impact open access journals

    OpenAIRE

    Vallez, Mari; Pagès i Camps, Gerard

    2014-01-01

    Poster presented in the LIBER 43rd Annual Conference. It is shown the tool "High-impact open access journals ¿" created by the Library of the Universitat Oberta de Catalunya. The tool gives access to open access journals listed in the Directory of Open Access Journals (DOAJ) with impact factor in the Journal Citation Reports 2011 or SCImago Journal Rank. Pòster presentat al LIBER 43rd Annual Conference. Es mostra l'eina "High-impact open access journals" creada per la Biblioteca de ...

  20. Ultra-high-Q wedge-resonator on a silicon chip

    CERN Document Server

    Lee, Hansuek; Li, Jiang; Yang, Ki Youl; Jeon, Seokmin; Painter, Oskar; Vahala, Kerry J

    2011-01-01

    Ultra-high-Q optical resonators are being studied across a wide range of research subjects including quantum information, nonlinear optics, cavity optomechanics, and telecommunications. Here, we demonstrate a new, resonator on-a-chip with a record Q factor of 875 million, surpassing even microtoroids. Significantly, these devices avoid a highly specialized processing step that has made it difficult to integrate microtoroids with other photonic devices and to also precisely control their size. Thus, these devices not only set a new benchmark for Q factor on a chip, but also provide, for the first time, full compatibility of this important device class with conventional semiconductor processing. This feature will greatly expand the possible kinds of system on a chip functions enabled by ultra-high-Q devices.

  1. Salt wedge dynamics lead to enhanced sediment trapping within side embayments in high-energy estuaries

    Science.gov (United States)

    Yellen, Brian; Woodruff, Jonathan D.; Ralston, David K.; MacDonald, D. G.; Jones, D. S.

    2017-03-01

    Off-river coves and embayments provide accommodation space for sediment accumulation, particularly for sandy estuaries where high energy in the main channel prevents significant long-term storage of fine-grained material. Seasonal sediment inputs to Hamburg Cove in the Connecticut River estuary (USA) were monitored to understand the timing and mechanisms for sediment storage there. Unlike in freshwater tidal coves, sediment was primarily trapped here during periods of low discharge, when the salinity intrusion extended upriver to the cove entrance. During periods of low discharge and high sediment accumulation, deposited sediment displayed geochemical signatures consistent with a marine source. Numerical simulations reveal that low discharge conditions provide several important characteristics that maximize sediment trapping. First, these conditions allow the estuarine turbidity maximum (ETM) to be located in the vicinity of the cove entrance, which increases sediment concentrations during flood tide. Second, the saltier water in the main channel can enter the cove as a density current, enhancing near-bed velocities and resuspending sediment, providing an efficient delivery mechanism. Finally, higher salinity water accumulates in the deep basin of the cove, creating a stratified region that becomes decoupled from ebb currents, promoting retention of sediment in the cove. This process of estuarine-enhanced sediment accumulation in off-river coves will likely extend upriver during future sea level rise.

  2. Portal dosimetry in wedged beams

    NARCIS (Netherlands)

    Spreeuw, H.; Rozendaal, R.; Camargo, P.; Mans, A.; Wendling, M.; Olaciregui-Ruiz, I.; Sonke, J.J.; Herk, M. van; Mijnheer, B.

    2015-01-01

    Portal dosimetry using electronic portal imaging devices (EPIDs) is often applied to verify high-energy photon beam treatments. Due to the change in photon energy spectrum, the resulting dose values are, however, not very accurate in the case of wedged beams if the pixel-to-dose conversion for the s

  3. Ice Particle Impacts on a Moving Wedge

    Science.gov (United States)

    Vargas, Mario; Struk, Peter M.; Kreeger, Richard E.; Palacios, Jose; Iyer, Kaushik A.; Gold, Robert E.

    2014-01-01

    This work presents the results of an experimental study of ice particle impacts on a moving wedge. The experiment was conducted in the Adverse Environment Rotor Test Stand (AERTS) facility located at Penn State University. The wedge was placed at the tip of a rotating blade. Ice particles shot from a pressure gun intercepted the moving wedge and impacted it at a location along its circular path. The upward velocity of the ice particles varied from 7 to 12 meters per second. Wedge velocities were varied from 0 to 120 meters per second. Wedge angles tested were 0 deg, 30 deg, 45 deg, and 60 deg. High speed imaging combined with backlighting captured the impact allowing observation of the effect of velocity and wedge angle on the impact and the post-impact fragment behavior. It was found that the pressure gun and the rotating wedge could be synchronized to consistently obtain ice particle impacts on the target wedge. It was observed that the number of fragments increase with the normal component of the impact velocity. Particle fragments ejected immediately after impact showed velocities higher than the impact velocity. The results followed the major qualitative features observed by other researchers for hailstone impacts, even though the reduced scale size of the particles used in the present experiment as compared to hailstones was 4:1.

  4. Studying wedge factors and beam profiles for physical and enhanced dynamic wedges

    Directory of Open Access Journals (Sweden)

    Ahmad Misbah

    2010-01-01

    Full Text Available This study was designed to investigate variation in Varian′s Physical and Enhanced Dynamic Wedge Factors (WF as a function of depth and field size. The profiles for physical wedges (PWs and enhanced dynamic wedges (EDWs were also measured using LDA-99 array and compared for confirmation of EDW angles at different depths and field sizes. WF measurements were performed in water phantom using cylindrical 0.66 cc ionization chamber. WF was measured by taking the ratio of wedge and open field ionization data. A normalized wedge factor (NWF was introduced to circumvent large differences between wedge factors for different wedge angles. A strong linear dependence of PW Factor (PWF with depth was observed. Maximum variation of 8.9% and 4.1% was observed for 60° PW with depth at 6 and 15 MV beams respectively. The variation in EDW Factor (EDWF with depth was almost negligible and less than two per cent. The highest variation in PWF as a function of field size was 4.1% and 3.4% for thicker wedge (60° at 6 and 15 MV beams respectively and decreases with decreasing wedge angle. EDWF shows strong field size dependence and significant variation was observed for all wedges at both photon energies. Differences in profiles between PW and EDW were observed on toe and heel sides. These differences were dominant for larger fields, shallow depths, thicker wedges and low energy beam. The study indicated that ignoring depth and field size dependence of WF may result in under/over dose to the patient especially doing manual point dose calculation.

  5. CyberKnife with tumor tracking: An effective alternative to wedge resection for high-risk surgical patients with stage I non-small cell lung cancer (NSCLC

    Directory of Open Access Journals (Sweden)

    Sean eCollins

    2012-02-01

    Full Text Available Published data suggests that wedge resection for stage I NSCLC results in improved overall survival compared to stereotactic body radiation therapy (SBRT. We report CyberKnife outcomes for high-risk surgical patients with biopsy-proven stage I NSCLC. PET/CT imaging was completed for staging. Three-to-five gold fiducial markers were implanted in or near tumors to serve as targeting references. Gross tumor volumes (GTVs were contoured using lung windows; the margins were expanded by 5 mm to establish the planning treatment volume (PTV. Treatment plans were designed using hundreds of pencil beams. Doses delivered to the PTV ranged from 42-60 Gy in 3 fractions. The 30-Gy isodose contour extended at least 1cm from the GTV to eradicate microscopic disease. Treatments were delivered using the CyberKnife system with tumor tracking. Examination and PET/CT imaging occurred at 3-month follow-up intervals. Forty patients (median age 76 with a median maximum tumor diameter of 2.6 cm (range, 1.4-5.0 cm and a mean post-bronchodilator percent predicted forced expiratory volume in 1 second (FEV1 of 57% (range, 21 - 111% were treated. A mean dose of 50 Gy was delivered to the PTV over 3 to 13 days (median, 7 days. The 30-Gy isodose contour extended a mean 1.9 cm from the GTV. At a median 44 months (range, 12 -72 months follow-up, the 3-year Kaplan-Meier locoregional control and overall survival estimates compare favorably with contemporary wedge resection outcomes at 91% and 75% , respectively. CyberKnife is an effective treatment approach for stage I NSCLC that is similar to wedge resection, eradicating tumors with 1 to 2 cm margins in order to preserve lung function. Prospective randomized trials comparing CyberKnife with wedge resection are necessary to confirm equivalence.

  6. A developed wedge fixtures assisted high precision TEM samples pre-thinning method: Towards the batch lamella preparation

    Directory of Open Access Journals (Sweden)

    Dandan Wang

    2017-04-01

    Full Text Available Ion milling, wedge cutting or polishing, and focused ion beam (FIB milling are widely-used techniques for the transmission electron microscope (TEM sample preparation. Especially, the FIB milling provides a site-specific analysis, deposition, and ablation of materials in the micrometer and nanometer scale. However, the cost of FIB tools has been always a significant concern. Since it is inevitable to use the FIB technique, the improvement of efficiency is a key point. Traditional TEM sample preparation with FIB was routinely implemented on a single sample each time. Aiming at cost efficiency, a new pre-thinning technique for batch sample preparation was developed in this paper. The present proposal combines the sample preparation techniques with multi-samples thinning, cross-section scanning electron microscopy (SEM, wedge cutting, FIB and other sample pre-thinning techniques. The new pre-thinning technique is to prepare an edge TEM sample on a grinding and polishing fixture with a slant surface. The thickness of the wedges sample can be measured to 1∼2 μm under optical microscope. Therefore, this fixture is superior to the traditional optical method of estimating the membrane thickness. Moreover, by utilizing a multi-sample holding fixture, more samples can be pre-thinned simultaneously, which significantly improved the productivity of TEM sample preparation.

  7. Osteotomia alta da tíbia com cunha de abertura medial: relevância biomecânica da cortical oposta Open wedge tibial osteotomy: biomechanical relevance of the opposite cortex for the fixation method

    Directory of Open Access Journals (Sweden)

    Rafael Lara de Freitas

    2010-01-01

    Full Text Available OBJETIVO: Avaliar o impacto da integridade da cortical lateral osteo-tomia alta de tíbia (OAT com cunha de abertura. MÉTODOS: Modelos experimentais artificiais em poliuretano foram fixados com placa DCP® 4,5mm. Cunhas de abertura foram confeccionadas para simular a distração da osteotomia alta da tíbia. Realizadas falhas na cortical lateral para simular fraturas e fixadas com diferentes tipos de parafusos. Ensaios de torção e compressão axial foram realizados. 04 diferentes grupos foram constituídos. RESULTADOS: As medidas de torção registradas no grupo com cortical íntegra foram superiores àquelas obtidas no grupo com cortical rompida (p0,05. As medidas de compressão obtidas no grupo com cortical íntegra foram superiores aos demais grupos (p0,05. CONCLUSÃO: A cortical lateral íntegra agrega estabilidade às osteotomias com cunha de abertura medial. Modelo com cortical íntegra evidenciou superioridade biomecânica em rigidez nos ensaios de torção e compressão. Nos ensaios torcionais, os modelos com falha de continuidade cortical com parafusos de estabilização lateral de compressão ou de posição apresentaram equivalência aos modelos com cortical íntegra.OBJECTIVE: To evaluate the role of lateral tibial cortex integrity in open wedge tibial osteotomy (OWTO. METHODS: Experimental models of polyurethane fibers, simulating tibial models and modified with open wedge osteotomies were fixed with DCP® straight 4.5 mm plates. Four groups were constituted: two with cortical integrity and two with a gap in the lateral tibial cortex. Biomechanical analysis of torsion and axial compression were performed. RESULTS: The measures of twist recorded in the group with cortical integrity were higher than those obtained in the group with noncontinuous cortices (p 0.05. CONCLUSION: Integrity of lateral tibial cortex adds stability to open wedge tibial osteotomies. Models with lateral cortical integrity demonstrated superiority in

  8. Medial Closing-Wedge Distal Femoral Osteotomy for Genu Valgum With Lateral Compartment Disease.

    Science.gov (United States)

    Wylie, James D; Maak, Travis G

    2016-12-01

    Lateral compartment disease combined with valgus alignment can lead to progressive knee joint degeneration. In the symptomatic patient with isolated lateral compartment disease, a varus-producing distal femoral osteotomy can unload the diseased lateral compartment. This osteotomy may be combined with other cartilage or meniscal restorative techniques to optimize knee joint preservation and pain relief. The osteotomy can be performed with a medial closing-wedge or lateral opening-wedge technique. Both techniques have been reported to improve knee-related quality of life in patients with lateral compartment disease. Advantages of the medial closing-wedge technique are direct bone apposition leading to inherent stability of the construct, as well as reliable bony healing, and less hardware irritation. Advantages of the lateral opening-wedge technique are a single bony cut and therefore more of an ability to adjust correction intraoperatively. However, this technique requires bone grafting and has a high rate of hardware irritation or removal. We present a surgical technique for the medial closing-wedge distal femoral osteotomy using an anteromedial-distal femoral locking plate.

  9. The decay of highly excited open strings

    Science.gov (United States)

    Mitchell, D.; Turok, N.; Wilkinson, R.; Jetzer, P.

    1988-01-01

    The decay rates of leading edge Regge trajectory states are calculated for very high level number in open bosonic string theories, ignoring tachyon final states. The optical theorem simplifies the analysis while enabling identification of the different mass level decay channels. The main result is that (in four dimensions) the greatest single channel is the emission of a single photon and a state of the next mass level down. A simple asymptotic formula for arbitrarily high level number is given for this process. Also calculated is the total decay rate exactly up to N=100. It shows little variation over this range but appears to decrease for larger N. The formalism is checked in examples and the decay rate of the first excited level calculated for open superstring theories. The calculation may also have implications for high spin meson resonances.

  10. Long polymers near wedges and cones

    Science.gov (United States)

    Hammer, Yosi; Kantor, Yacov

    2015-12-01

    We perform a Monte Carlo study of N -step self-avoiding walks, attached to the corner of an impenetrable wedge in two dimensions (d =2 ), or the tip of an impenetrable cone in d =3 , of sizes ranging up to N =106 steps. We find that the critical exponent γα, which determines the dependence of the number of available conformations on N for a cone or wedge with opening angle α , is in good agreement with the theory for d =2 . We study the end-point distribution of the walks in the allowed space and find similarities to the known behavior of random walks (ideal polymers) in the same geometry. For example, the ratio between the mean square end-to-end distances of a polymer near the cone or wedge and a polymer in free space depends linearly on γα, as is known for ideal polymers. We show that the end-point distribution of polymers attached to a wedge does not separate into a product of angular and radial functions, as it does for ideal polymers in the same geometry. The angular dependence of the end position of polymers near the wedge differs from theoretical predictions.

  11. Fastening of a High-Strength Composite Rod with a Splitted and Wedged End in a Potted Anchor 2. Finite-Element Analysis

    Science.gov (United States)

    Kulakov, V. L.; Terrasi, G. P.; Arnautov, A. K.; Portnov, G. G.; Kovalov, A. O.

    2014-03-01

    A finite element analysis is carried out to determine the stress-strain state of anchors for round rods made of a high- modulus, high-strength unidirectional carbon-fiber reinforced plastic. The rods have splitted ends in which Duralumin wedges are glued. Three types of contact between the composite rods and a potted epoxy compound are considered: adhesion, adhesion-friction, and friction ones. The corresponding three-dimensional problems in the elastic statement are solved by the finite-element method (FEM) with account of nonlinear Coulomb friction. An analysis of stresses on the surface of the composite rod revealed the locations of high concentrations of operating stresses. The results of FEM calculations agree with experimental data.

  12. Wedges of Anxiety

    DEFF Research Database (Denmark)

    Hellström, Maria; Brandt, Eva

    2005-01-01

    The Heraclitian notion of a reality in constant flux seems to have settled even in the public consciousness. We are, to an ever-increasing extent, on the move; in motion between different places of abode, between domiciles and places of residence, between temporary addresses and provisory settlem...... cones of light, as the cut their way into the unknown, like wedges of anxiety...

  13. Hydrodynamics of slip wedge and optimization of surface slip property

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The hydrodynamic load support generated by a slip wedge of a slider bearing was studied. The surface slip property was optimized so that a maximum hydrodynamic load support could be obtained. A multi-linearity method was given for the slip control equation of two-dimensional (2-D) wall slip. We investigated 2-D wall slip and the hydrodynamics of a finite length bearing with any values of the surface limiting shear stress. It was found that the hydrodynamic effect of the slip wedge is greater than the traditional geometrical convergent-wedge. Even though the geo- metrical gap is a parallel or divergent sliding gap, the slip wedge still gives rise to a very big hydrodynamic pressure. The optimized slip wedge can give rise to a hy- drodynamic load support as high as 2.5 times of what the geometrical conver- gent-wedge can produce. Wall slip usually gives a small surface friction.

  14. Hydrodynamics of slip wedge and optimization of surface slip property

    Institute of Scientific and Technical Information of China (English)

    MA GuoJun; WU ChengWei; ZHOU Ping

    2007-01-01

    The hydrodynamic load support generated by a slip wedge of a slider bearing was studied. The surface slip property was optimized so that a maximum hydrodynamic load support could be obtained. A multi-linearity method was given for the slip control equation of two-dimensional (2-D) wall slip. We investigated 2-D wall slip and the hydrodynamics of a finite length bearing with any values of the surface limiting shear stress. It was found that the hydrodynamic effect of the slip wedge is greater than the traditional geometrical convergent-wedge. Even though the geometrical gap is a parallel or divergent sliding gap, the slip wedge still gives rise to a very big hydrodynamic pressure. The optimized slip wedge can give rise to a hydrodynamic load support as high as 2.5 times of what the geometrical convergent-wedge can produce. Wall slip usually gives a small surface friction.

  15. Shock detachment from curved wedges

    Science.gov (United States)

    Mölder, S.

    2017-03-01

    Curved shock theory is used to show that the flow behind attached shocks on doubly curved wedges can have either positive or negative post-shock pressure gradients depending on the freestream Mach number, the wedge angle and the two wedge curvatures. Given enough wedge length, the flow near the leading edge can choke to force the shock to detach from the wedge. This local choking can preempt both the maximum deflection and the sonic criteria for shock detachment. Analytical predictions for detachment by local choking are supported by CFD results.

  16. Shock detachment from curved wedges

    Science.gov (United States)

    Mölder, S.

    2017-09-01

    Curved shock theory is used to show that the flow behind attached shocks on doubly curved wedges can have either positive or negative post-shock pressure gradients depending on the freestream Mach number, the wedge angle and the two wedge curvatures. Given enough wedge length, the flow near the leading edge can choke to force the shock to detach from the wedge. This local choking can preempt both the maximum deflection and the sonic criteria for shock detachment. Analytical predictions for detachment by local choking are supported by CFD results.

  17. Coherently Opening a High-Q Cavity

    Science.gov (United States)

    Tufarelli, Tommaso; Ferraro, Alessandro; Serafini, Alessio; Bose, Sougato; Kim, M. S.

    2014-04-01

    We propose a general framework to effectively "open" a high-Q resonator, that is, to release the quantum state initially prepared in it in the form of a traveling electromagnetic wave. This is achieved by employing a mediating mode that scatters coherently the radiation from the resonator into a one-dimensional continuum of modes such as a waveguide. The same mechanism may be used to "feed" a desired quantum field to an initially empty cavity. Switching between an open and "closed" resonator may then be obtained by controlling either the detuning of the scatterer or the amount of time it spends in the resonator. First, we introduce the model in its general form, identifying (i) the traveling mode that optimally retains the full quantum information of the resonator field and (ii) a suitable figure of merit that we study analytically in terms of the system parameters. Then, we discuss two feasible implementations based on ensembles of two-level atoms interacting with cavity fields. In addition, we discuss how to integrate traditional cavity QED in our proposal using three-level atoms.

  18. Interpretation of highly visual 'open' advertisements in Dutch magazines

    NARCIS (Netherlands)

    Ketelaar, P.E.; Gisbergen, M.S.; Beentjes, J.

    2012-01-01

    In recent decades magazine advertisers have used an increasing number of highly visual open ads. Open ads do not guide consumers toward a specific interpretation as traditional ads do. An experiment was carried out to establish the effects of openness on interpretation. As expected, openness was

  19. Effect of wedge filter and field size on photoneutron dose equivalent for an 18 MV photon beam of a medical linear accelerator

    Energy Technology Data Exchange (ETDEWEB)

    Mesbahi, Asghar [Medical Physics Department, Medical School, Tabriz University of Medical Sciences, Tabriz (Iran, Islamic Republic of); Radiation Therapy Department, Imam Hospital, Tabriz (Iran, Islamic Republic of)], E-mail: asgharmesbahi@yahoo.com; Keshtkar, Ahmad [Medical Physics Department, Medical School, Tabriz University of Medical Sciences, Tabriz (Iran, Islamic Republic of); Mohammadi, Ehsan [Radiation Therapy Department, Imam Khomeini Hospital, Tehran (Iran, Islamic Republic of); Mohammadzadeh, Mohammad [Radiation Therapy Department, Imam Hospital, Tabriz (Iran, Islamic Republic of)

    2010-01-15

    Photoneutrons produced during radiation therapy with high energy photons is the main source of unwanted out-of-field received doses of patients. To analyze the neutron dose equivalent (NDE) for wedged beams and its variation with field size, Monte Carlo (MC) modeling of an 18 MV photon beam was performed using MCNPX MC code. The results revealed that the NDE is on average 6.5 times higher for wedged beams. For open beams, the NDE decreased with increasing field size especially for field sizes >20x20 cm{sup 2}. While, for wedged beams, the NDE increased with field size. It was suggested that the increase of NDE for wedged beams should be taken into account in radiation-induced secondary cancer risk estimations and radiation protection calculations.

  20. The Highly Polarized Open Cluster Trumpler 27

    Science.gov (United States)

    Feinstein, Carlos; Baume, Gustavo; Vazquez, Ruben; Niemela, Virpi; Cerruti, Miguel Angel

    2000-10-01

    We have carried out multicolor linear polarimetry (UBVRI) of the brightest stars in the area of the open cluster Trumpler 27. Our data show a high level of polarization in the stellar light with a considerable dispersion, from P=4% to P=9.5%. The polarization vectors of the cluster members appear to be aligned. Foreground polarization was estimated from the data of some nonmember objects, for which two different components were resolved: the first one associated with a dust cloud close to the Sun producing Pλmax=1.3% and θ=146°, and a second component, the main source of polarization for the cluster members, originating in another dust cloud, which polarizes the light in the direction of θ=29.5d. From a detailed analysis, we found that the two components have associated values EB-V0.75 for the other. Due the difference in the orientation of both polarization vectors, almost 90° (180° at the Stokes representation), the first cloud (θ~146°) depolarizes the light strongly polarized by the second one (θ~29.5d). Based on observations obtanined at Complejo Astronómico El Leoncito (CASLEO), operated under agreement between CONICET and the National Universities of La Plata, Córdoba, and San Juan, Argentina.

  1. The highly polarized open cluster Trumpler 27

    CERN Document Server

    Feinstein, C; Vázquez, R A; Niemela, V S; Cerruti, M A; Feinstein, Carlos; Baume, Gustavo; Vazquez, Ruben; Niemela, Virpi; Cerruti, Miguel Angel

    2000-01-01

    We have carried out multicolor linear polarimetry (UBVRI) of the brightest stars in the area of the open cluster Trumpler 27. Our data show a high level of polarization in the stellar light with a considerable dispersion, from $P = 4%$ to $P = 9.5%$. The polarization vectors of the cluster members appear to be aligned. Foreground polarization was estimated from the data of some non-member objects, for which two different components were resolved: the first one associated with a dust cloud close to the Sun producing $P_{\\lambda max}=1.3%$ and $\\theta=146$ degrees, and a second component, the main source of polarization for the cluster members, originated in another dust cloud, which polarizes the light in the direction of $\\theta= 29.5$ degrees. From a detailed analysis, we found that the two components have associated values $E_{B-V} 0.75$ for the other. Due the difference in the orientation of both polarization vectors, almost 90 degrees (180 degrees at the Stokes representation), the first cloud ($\\theta \\...

  2. Comparison of wedge resection (Winograd procedure) and wedge resection plus complete nail plate avulsion in the treatment of ingrown toenails.

    Science.gov (United States)

    Huang, Jia-Zhang; Zhang, Yi-Jun; Ma, Xin; Wang, Xu; Zhang, Chao; Chen, Li

    2015-01-01

    The present retrospective study compared the efficacy of wedge resection (Winograd procedure) and wedge resection plus complete nail plate avulsion for the treatment of ingrown toenails (onychocryptosis). Two surgical methods were performed in 95 patients with a stage 2 or 3 ingrown toenail. Each patient was examined weekly until healing and then at 1, 6, and 12 months of follow-up. The outcomes measured were surgical duration, healing time, recurrence rate, the incidence of postoperative infection, and cosmetic appearance after surgery. Of the 95 patients (115 ingrown toenails) included in the present study, 39 (41.1%) underwent wedge resection (Winograd procedure) and 56 (59%), wedge resection plus complete nail plate avulsion. The mean surgical duration for wedge resection (Winograd procedure) and wedge resection plus complete nail plate avulsion was 14.9 ± 2.4 minutes and 15.1 ± 3.2 minutes, respectively (p = .73). The corresponding healing times were 2.8 ± 1.2 weeks and 2.7 ± 1.3 weeks (p = .70). Recurrence developed in 3 (3.2%) patients after wedge resection (Winograd procedure) and in 4 (4.2%) after wedge resection plus complete nail plate avulsion. In addition, postoperative infection occurred in 3 (3.2%) patients after wedge resection (Winograd procedure) and 2 (2.1%) after wedge resection plus complete nail plate avulsion. Both of the surgical procedures were practical and appropriate for the treatment of ingrown toenails, being simple and associated with low morbidity and a high success rate. However, cosmetically, wedge resection (Winograd procedure) would be the better choice because the nail plate remains intact.

  3. Life at the wedge: the activity and diversity of arctic ice wedge microbial communities.

    Science.gov (United States)

    Wilhelm, Roland C; Radtke, Kristin J; Mykytczuk, Nadia C S; Greer, Charles W; Whyte, Lyle G

    2012-04-01

    The discovery of polygonal terrain on Mars underlain by ice heightens interest in the possibility that this water-bearing habitat may be, or may have been, a suitable habitat for extant life. The possibility is supported by the recurring detection of terrestrial microorganisms in subsurface ice environments, such as ice wedges found beneath tundra polygon features. A characterization of the microbial community of ice wedges from the high Arctic was performed to determine whether this ice environment can sustain actively respiring microorganisms and to assess the ecology of this extreme niche. We found that ice wedge samples contained a relatively abundant number of culturable cells compared to other ice habitats (∼10(5) CFU·mL(-1)). Respiration assays in which radio-labeled acetate and in situ measurement of CO(2) flux were used suggested low levels of microbial activity, though more sensitive techniques are required to confirm these findings. Based on 16S rRNA gene pyrosequencing, bacterial and archaeal ice wedge communities appeared to reflect surrounding soil communities. Two Pseudomonas sp. were the most abundant taxa in the ice wedge bacterial library (∼50%), while taxa related to ammonia-oxidizing Thaumarchaeota occupied 90% of the archaeal library. The tolerance of a variety of isolates to salinity and temperature revealed characteristics of a psychrotolerant, halotolerant community. Our findings support the hypothesis that ice wedges are capable of sustaining a diverse, plausibly active microbial community. As such, ice wedges, compared to other forms of less habitable ground ice, could serve as a reservoir for life on permanently cold, water-scarce, ice-rich extraterrestrial bodies and are therefore of interest to astrobiologists and ecologists alike. .

  4. Group based prenatal care in a low-and high risk population in the Netherlands: a study protocol for a stepped wedge cluster randomized controlled trial.

    Science.gov (United States)

    van Zwicht, Birgit S; Crone, Matty R; van Lith, Jan M M; Rijnders, Marlies E B

    2016-11-15

    CenteringPregnancy (CP) is a multifaceted group based care-model integrated in routine prenatal care, combining health assessment, education, and support. CP has shown some positive results on perinatal outcomes. However, the effects are less obvious when limited to the results of randomized controlled trials: as there are few trials and there is a variation in reported outcomes. Furthermore, former research was mostly conducted in the United States of America and in specific (often high risk) populations. Our study aims to evaluate the effects of CP in the Netherlands in a general population of pregnant women (low and high risk). Furthermore we aim to explore the mechanisms leading to the eventual effects by measuring potential mediating factors. We will perform a stepped wedge cluster randomized controlled trial, in a Western region in the Netherlands. Inclusion criteria are control period will receive individual care, women in the intervention period (starting at the randomized time-point) will be offered the choice between individual care or CP. Primary outcomes are maternal and neonatal morbidity, retrieved from a national routine database. Secondary outcomes are health behavior, psychosocial outcomes, satisfaction, health care utilization and process outcomes, collected through self-administered questionnaires, group-evaluations and individual interviews. We will conduct intention-to-treat analyses. Also a per protocol analysis will be performed comparing the three subgroups: control group, CP-participants and non-CP-participants, using multilevel techniques to account for clustering effects. This study contributes to the evidence regarding the effect of CP and gives a first indication of the effect and implementation of CP in both low and high-risk pregnancies in a high-income Western society other than the USA. Also, measuring factors that are hypothesized to mediate the effect of CP will enable to explain the mechanisms that lead to effects on maternal and

  5. The Tax Wedge in Slovenia: International Comparison and Policy Recommendations

    Directory of Open Access Journals (Sweden)

    Primož Dolenc

    2005-09-01

    Full Text Available When taxes on labor are introduced, a “tax wedge” appears between the labor costs paid by the employer (gross wage and the net wage received by an employee. At a certain level of wage, a higher tax wedge increases unemployment and decreases employment, all other things being equal. The paper tackles three main questions: the characteristics of the tax wedge, unemployment and employment rates in OECD countries in the recent past, tax wedge policy in the EU15 and the new EU members and the tax system and its effects on the unemployment and employment rates in Slovenia. We found that the OECD countries can be classified into two groups of countries if the tax wedge, the unemployment rate and the employment rate are taken into consideration. The first group is the high tax wedge, high unemployment rate and low employment rate group of countries, whereas the other group has the opposite characteristics. European member states (old and new have on average a higher tax burden on labor than the OECD average, consequently suffering from higher unemployment rates. Slovenia has an unreasonably high tax wedge; in the EU only Belgium and Germany have a higher tax burden. According to previous and our empirical findings we suggest that Slovenia could benefit from a reduction in the tax wedge.

  6. Employment and productivity: The role of the tax wedge

    Directory of Open Access Journals (Sweden)

    Andrea FESTA

    2015-11-01

    Full Text Available After the economic crisis, many countries aim at reducing unemployment and foster productivity. To address these issues one of the most common policy indications recommends lowering the tax wedge on labour in order to increase employment and growth. As a consequence, a review of the empirical studies focused on the relation between tax wedge, employment and productivity is an useful and demanding exercise, especially in those European countries where the topic is on the front page of the domestic policy debate because the productivity growth is low and the tax wedge on labour is high.

  7. Scattering of wedges and cones with impedance boundary conditions

    CERN Document Server

    Lyalinov, Mikhail

    2012-01-01

    This book is a systematic and detailed exposition of different analytical techniques used in studying two of the canonical problems, the wave scattering by wedges or cones with impedance boundary conditions. It is the first reference on novel, highly efficient analytical-numerical approaches for wave diffraction by impedance wedges or cones. The applicability of the reported solution procedures and formulae to existing software packages designed for real-world high-frequency problems encountered in antenna, wave propagation, and radar cross section.

  8. New machining and testing method of large angle infrared wedge mirror parts

    Science.gov (United States)

    Su, Ying; Guo, Rui; Zhang, Fumei; Zhang, Zheng; Liu, Xuanmin; Zengqi, Xu; Li, Wenting; Zhang, Feng

    2016-10-01

    Large angle wedge parts were widely used in the optical system that was used for achieving a wide range of scanning. Due to the parts having the characteristic of large difference in the thickness of both ends and high density, the accuracy of the wedge angle was hard to ensure to reach second level in optical processing. Generally, wedge mirror angle was measured by contact comparison method which was easy to damage the surface. In view of the existence of two practical problems, in this paper, based on theoretical analysis, by taking three key measures that were the accurate positioning for the central position of the large angle wedge part, the accuracy control of angle precision machined of wedge mirror and fast and non destructive laser assisted absolute measurement of large angle wedge, the qualified rate of parts were increased to 100%, a feasible, controllable and efficient process route for large angle infrared wedge parts was found out.

  9. Open Cell Conducting Foams for High Synchrotron Radiation Beam Liners

    CERN Document Server

    Petracca, Stefania

    2014-01-01

    The possible use of open-cell conductive foams in high synchrotron radiation particle accelerator beam liners is considered. Available materials and modeling tools are reviewed, potential pros and cons are discussed, and preliminary conclusions are drawn.

  10. High Quality Education and Learning for All through Open Education

    OpenAIRE

    Stracke, Christian M.

    2016-01-01

    Keynote at the International Lensky Education Forum 2016, Yakutsk, Republic of Sakha, Russian Federation, by Stracke, C. M. (2016, 16 August): "High Quality Education and Learning for All through Open Education"

  11. High Quality Education and Learning for All through Open Education

    NARCIS (Netherlands)

    Stracke, Christian M.

    2016-01-01

    Keynote at the International Lensky Education Forum 2016, Yakutsk, Republic of Sakha, Russian Federation, by Stracke, C. M. (2016, 16 August): "High Quality Education and Learning for All through Open Education"

  12. Structure and Kinematics of the Indo-Burmese Wedge

    Science.gov (United States)

    Maurin, T.; Rangin, C.

    2007-12-01

    The Burma subduction trench and the associated Indo Burmese wedge mark the present eastern boundary of the Indian plate in the northern Bengal area. The initiation, duration and history of the Bengal crust subduction beneath Burma is still debated. The aim of this paper is to provide a structural and kinematic analysis of the Indo- Burmese wedge in order to better constraints the Bengal crust subduction history beneath Burma. On the basis of field observations, seismic reflection data interpretation and well logs data we present a structural analysis of the Outer Indo-Burmese Wedge. We also constrain the onset of this Outer Wedge to be younger than 2Ma, implying a recent and fast westward growth (~10cm/yr) since Late Pliocene in close relationship with the onset of the Shillong plateau. Restoration process of a synthetic cross section through the Outer Wedge allowed us to estimate the amount of EW shortening accommodated in the Outer Wedge to be 5.1mm/yr since 2Ma. These results combined with previous available GPS data from central Myanmar suggest strain partitioning at wedge scale. The core of the wedge is affected by shear deformation and acts as a buttress for a frontal wedge that accommodates a more compressive strain component. Finally we propose that the main characteristic of the Indo-Burmese wedge growth mechanism is the progressive incorporation of the most internal part of the wedge, formerly affected by transpressive thin-skinned tectonics, to the buttress where they are subsequently affected by shear deformation. The crustal structure boarding the newly formed buttress seems to be guided by the subducting crust fabrics. We are in favour of a very recent (Late Miocene) onset of the present Indian crust subduction beneath Burma coeval with the global plate kinematics reorganisation related to the Indian/Australian plate spliting. This subduction postdates the Indo Burmese range onset that must have started in early Miocene. This range first began to

  13. Conceptual design of heavy ion beam compression using a wedge

    Directory of Open Access Journals (Sweden)

    Jonathan C. Wong

    2015-10-01

    Full Text Available Heavy ion beams are a useful tool for conducting high energy density physics (HEDP experiments. Target heating can be enhanced by beam compression, because a shorter pulse diminishes hydrodynamic expansion during irradiation. A conceptual design is introduced to compress ∼100  MeV/u to ∼GeV/u heavy ion beams using a wedge. By deflecting the beam with a time-varying field and placing a tailor-made wedge amid its path downstream, each transverse slice passes through matter of different thickness. The resulting energy loss creates a head-to-tail velocity gradient, and the wedge shape can be designed by using stopping power models to give maximum compression at the target. The compression ratio at the target was found to vary linearly with (head-to-tail centroid offset/spot radius at the wedge. The latter should be approximately 10 to attain tenfold compression. The decline in beam quality due to projectile ionization, energy straggling, fragmentation, and scattering is shown to be acceptable for well-chosen wedge materials. A test experiment is proposed to verify the compression scheme and to study the beam-wedge interaction and its associated beam dynamics, which will facilitate further efforts towards a HEDP facility.

  14. Some Historical Treatments should not be Forgotten: A Review of Cast Wedging and A Trick to Normalize Non-Standardized Digital X-rays

    OpenAIRE

    2014-01-01

    Introduction: Cast wedging is a simple and reproducible method of manipulating a sub-optimally reduced fracture producing a correction and a final alignment that is amenable to definitive closed treatment. Multiple successful techniques have been previously described in the literature (opening wedge, closing wedge and combination). Technical Note: We present a simple reproducible method of templating and executing a proper cast wedging technique using digital imaging systems that are not cont...

  15. Comparison of dosimetric characteristics of Siemens virtual and physical wedges for ONCOR linear accelerator

    Directory of Open Access Journals (Sweden)

    Attalla Ehab

    2010-01-01

    Full Text Available Dosimetric properties of virtual wedge (VW and physical wedge (PW in 6- and 10-MV photon beams from a Siemens ONCOR linear accelerator, including wedge factors, depth doses, dose profiles, peripheral doses, are compared. While there is a great difference in absolute values of wedge factors, VW factors (VWFs and PW factors (PWFs have a similar trend as a function of field size. PWFs have stronger depth dependence than VWF due to beam hardening in PW fields. VW dose profiles in the wedge direction, in general, match very well with those of PW, except in the toe area of large wedge angles with large field sizes. Dose profiles in the nonwedge direction show a significant reduction in PW fields due to off-axis beam softening and oblique filtration. PW fields have significantly higher peripheral doses than open and VW fields. VW fields have similar surface doses as the open fields, while PW fields have lower surface doses. Surface doses for both VW and PW increase with field size and slightly with wedge angle. For VW fields with wedge angles 45° and less, the initial gap up to 3 cm is dosimetrically acceptable when compared to dose profiles of PW. VW fields in general use less monitor units than PW fields.

  16. Calculating dose distributions and wedge factors for photon treatment fields with dynamic wedges based on a convolution/superposition method.

    Science.gov (United States)

    Liu, H H; McCullough, E C; Mackie, T R

    1998-01-01

    A convolution/superposition based method was developed to calculate dose distributions and wedge factors in photon treatment fields generated by dynamic wedges. This algorithm used a dual source photon beam model that accounted for both primary photons from the target and secondary photons scattered from the machine head. The segmented treatment tables (STT) were used to calculate realistic photon fluence distributions in the wedged fields. The inclusion of the extra-focal photons resulted in more accurate dose calculation in high dose gradient regions, particularly in the beam penumbra. The wedge factors calculated using the convolution method were also compared to the measured data and showed good agreement within 0.5%. The wedge factor varied significantly with the field width along the moving jaw direction, but not along the static jaw or the depth direction. This variation was found to be determined by the ending position of the moving jaw, or the STT of the dynamic wedge. In conclusion, the convolution method proposed in this work can be used to accurately compute dose for a dynamic or an intensity modulated treatment based on the fluence modulation in the treatment field.

  17. Triangular metal wedges for subwavelength plasmon-polariton guiding at telecom wavelengths

    DEFF Research Database (Denmark)

    Boltasseva, Alexandra; Volkov, V.S.; Nielsen, Rasmus Bundgaard

    2008-01-01

    . Using scanning near-field optical imaging at the wavelengths in the range of 1.43 - 1.52 µm, we demonstrate low-loss (propagation length ~ 120 µm) and well-confined (mode width ≅ 1.3 µm) wedge plasmon-polariton guiding along triangular 6-µm-high and 70.5°- angle gold wedges. Experimental observations......We report on subwavelength plasmon-polariton guiding by triangular metal wedges at telecom wavelengths. A high-quality fabrication procedure for making gold wedge waveguides, which is also mass- production compatible offering large-scale parallel fabrication of plasmonic components, is developed...

  18. Ice wedges as climate archives - opportunities and limitations

    Science.gov (United States)

    Opel, Thomas; Meyer, Hanno; Dereviagin, Alexander; Wetterich, Sebastian; Schirrmeister, Lutz

    2014-05-01

    Permafrost regions are assumed to play a major role for Global Climate Change as they are susceptible to recent warming in particular with regard to the potential release of stored fossil carbon. Permafrost serves as archive of past environmental and climate conditions (such as sedimentation processes, temperature and precipitation regimes as well as landscape and ecosystem development) over tens of thousands of years that can be traced by the study of the frozen deposits, paleontological content and ground ice. Ground ice comprises all types of ice contained in frozen ground, including pore ice, segregation ice and ice wedges. Here, we focus on ice wedges as the most promising climate archive that can be studied by stable water isotope methods analogously to glacier ice. They may be identified by their vertically oriented foliations. Ice wedges form by the repeated filling of wintertime thermal contraction cracks by snow melt water in spring. As the melt water quickly refreezes at negative ground temperature no isotopic fractionation takes place. Hence, the isotopic composition (δ18O, δD, d excess) of wedge ice is assumed to be representative of annual cold period climate conditions, i.e. winter and spring. Ice wedges are widely distributed in non-glaciated high northern latitudes, are diagnostic of permafrost and, in general, indicative of cold and stable climate conditions. They are found in continuous and discontinuous permafrost zones and may also have formed during and survived interglacials. They may provide unique paleo information that is not captured by other climate archives. Usually, ice wedges are dated by radiocarbon dating of organic material incorporated in the ice, but also 36Cl/Cl ratios have been successfully used to date ice wedges. Nevertheless reliable age determination is challenging when studying ice wedges. Here we tackle the potential of ice wedges from the Siberian and American Arctic to trace past climate changes from stable isotope

  19. A resonant series counterpulse technique for high current opening switches

    Energy Technology Data Exchange (ETDEWEB)

    Dijk, E. van [Delft Univ. of Technology (Netherlands). Lab. for Power Electronics and Electrical Machines; Gelder, P. van [TNO PML-Pulse Physics Lab., Delft (Netherlands)

    1995-01-01

    A counterpulse technique for the controlled interruption of very high currents in inductive storage pulsed power systems is described and analyzed, and some simulation results of its performance are presented. The accompanying circuit comprises a pre-charged capacitor bank, connected in series with the inductive load, which has to be provided with a current pulse. Upon actuation, a resonant counterpulse current is created in the opening switch, connected in parallel with the current source and the load. In this way, the opening switch is opened at low current. A separate closing switch prevents closing of the opening switch at high voltage. Operation of the opening switch, often a mechanical switch, at low current and low voltage prevents arc erosion of the contacts. The advantage of this circuit compared to other counterpulse circuits is that the capacitor bank does not experience a voltage reversal. Electrolytic capacitors, which have a high energy density, are applied. The remaining energy of the capacitor bank after opening the opening switch, is transferred to the load. The required initial voltage of the capacitor bank is only a few hundred volts, whereas it may be above a kilovolt in other circuits. Another advantage of the method described here is that the load does not experience a pre-current, causing unwanted preheating of the load, before the resonant current is activated. At the moment, work is being performed at the Pulse Physics Laboratory to develop the resonant series counterpulse circuit for use with rail accelerators, which must be supplied with current pulses in the millisecond range up to the mega-ampere level.

  20. Contact process in a wedge

    CERN Document Server

    Cox, J Theodore; Schinazi, Rinaldo B

    2009-01-01

    We prove that the supercritical one-dimensional contact process survives in certain wedge-like space-time regions, and that when it survives it couples with the unrestricted contact process started from its upper invariant measure. As an application we show that a type of weak coexistence is possible in the nearest-neighbor ``grass-bushes-trees'' successional model introduced in Durrett and Swindle (1991).

  1. Silicon solar cells with high open-circuit voltage

    Science.gov (United States)

    Minnucci, J. A.; Matthei, K. W.; Kirkpatrick, A. R.; Mccrosky, A.

    1980-01-01

    Open-circuit voltages as high as 0.645 V (AM0-25 C) have been obtained by a new process developed for low-resistivity silicon. The method utilizes high-dose phosphorus implantation, followed by furnace annealing and simultaneous oxide growth to form high-efficiency, shallow junctions. The effect of the thermally grown oxide is a reduction of surface recombination velocity; the oxide also acts as a moderately efficient AR coating. Boron doped silicon with resistivities from 0.1 to 0.3 ohm-cm has been processed according to this sequence; results show highest open-circuit voltage is attained with 0.1-ohm-cm starting material. The effects of bandgap narrowing, caused by high doping concentrations in the junction, were also investigated by implanting phosphorus over a wide range of dose levels.

  2. Maladaptively high and low openness: the case for experiential permeability.

    Science.gov (United States)

    Piedmont, Ralph L; Sherman, Martin F; Sherman, Nancy C

    2012-12-01

    The domain of Openness within the Five-Factor Model (FFM) has received inconsistent support as a source for maladaptive personality functioning, at least when the latter is confined to the disorders of personality included within the American Psychiatric Association's (APA) Diagnostic and Statistical Manual of Mental Disorders (DSM-IV-TR; APA, ). However, an advantage of the FFM relative to the DSM-IV-TR is that the former was developed to provide a reasonably comprehensive description of general personality structure. Rather than suggest that the FFM is inadequate because the DSM-IV-TR lacks much representation of Openness, it might be just as reasonable to suggest that the DSM-IV-TR is inadequate because it lacks an adequate representation of maladaptive variants of both high and low Openness. This article discusses the development and validation of a measure of these maladaptive variants, the Experiential Permeability Inventory.

  3. Wedge Splitting Test and Fracture Energy on Particulate Reinforced Composites

    Energy Technology Data Exchange (ETDEWEB)

    Na, Seong Hyeon; Kim, Jae Hoon; Choi, Hoon Seok [Chungnam National Univ., Daejeon (Korea, Republic of); Park, Jae Beom; Kim, Shin Hoe; Jung, Gyoo Dong [Agency for Defense Developmen, Daejeon (Korea, Republic of)

    2016-03-15

    The effect of temperature on the fracture energy, crack propagation, and crack tip opening displacement(CTOD) was determined for particulate reinforced composites using the wedge splitting test. The materials that were used consisted of a polymer binder, an oxidizing agent, and aluminum particles. The test rate of the wedge splitting specimen was 50 mm/min, the temperature conditions were 50℃, room temperature, -40℃, and -60℃. The fracture energy, calculated from splitting load-crack mouth opening displacement(CMOD) curves, increased with decreasing temperature from 50℃ to -40℃. In addition, the strength of the particulate reinforced composites increased sharply at -60℃, and the composites evidenced brittle fracture due to the glass transition temperature. The strain fields near the crack tip were analyzed using digital image correlation.

  4. The Influence of Localized Glacial Erosion on Exhumation Paths in Accreting Coulomb Wedges: Insights from Particle Velocimetry Analysis of Sandbox Models

    Science.gov (United States)

    Newman, P. J.; Davis, K.; Haq, S. S. B.; Ridgway, K.

    2015-12-01

    Glacial erosion can have an impact on the location and development of faults in mountain belts. The rapid removal and deposition of rock, in some cases, is thought to affect the initiation of slip on older fault structures, or cause the development of new structures within the older part of the wedge. We present cross-sectional data from both erosional and non-erosional sandbox models of Coulomb wedges in order to quantify the impact of localized erosion on the location of and slip on deformational structures, as well as the general path of material through a wedge. To do this, we employ Lagrangian particle tracking velocimetry (PTV) using the open-source Python PTV toolkit trackpy, among a suite of other data analysis tools. We are able to extract robust and reliable sets of particle trajectories from a series of images without the need for predefined markers or marker-beds, instead identifying and tracking natural variations in sand color as individual particles. By comparing the motion of particles in cross-section to the local surface topography over an entire experiment, we determine a high-resolution record of exhumation rates, in addition to simple uplift rates. These comparisons are further informed by the use of high-definition Eulerian particle image velocimetry (PIV), which provides quantitative data about the distribution of deformation and instantaneous material displacements throughout a cross-sectional view of a Coulomb wedge. This allows us to interpret these pathways in relation to the behavior of active structures and general wedge morphology. In our experiments, we observe that localized glacial erosion has an impact on material pathways, in the form of an increased rate of exhumation locally, more vertical trajectories towards surface below the zone of erosion, and reactivation of older structures to maintain force balance within the entire wedge.

  5. Some Historical Treatments should not be Forgotten: A Review of Cast Wedging and A Trick to Normalize Non-Standardized Digital X-rays

    Science.gov (United States)

    Jacobson, Nathan A.; Lee, Christopher L.

    2014-01-01

    Introduction: Cast wedging is a simple and reproducible method of manipulating a sub-optimally reduced fracture producing a correction and a final alignment that is amenable to definitive closed treatment. Multiple successful techniques have been previously described in the literature (opening wedge, closing wedge and combination). Technical Note: We present a simple reproducible method of templating and executing a proper cast wedging technique using digital imaging systems that are not controlled for magnification with an illustrative case. Conclusion: Renewed interest in cast wedging can provide a cost effective treatment with proven clinical outcomes in an ever changing and uncertain reimbursement climate. PMID:27298956

  6. Open Globe Injuries Presenting With Normal or High Intraocular Pressure.

    Science.gov (United States)

    Margo, Jordan A; Feldman, Samantha; Addis, Hampton; Bodanapally, Uttam K; Ellish, Nancy; Saeedi, Osamah

    2016-07-01

    To determine the frequency, clinical characteristics, and visual outcomes of patients who present with high or normal intraocular pressure (IOP) and open globe injuries. Retrospective chart review. University of Maryland Medical Center, a level 1 trauma center. All cases of open globe injury presenting to The University of Maryland Medical Center from July 2005 to January 2014. Demographics, initial physical examination, computed tomography findings, IOP of the affected and unaffected eyes, and follow-up evaluations. (1) IOP 10 mm Hg or greater and (2) visual acuity. Of 132 eyes presenting with open globe injury, IOP was recorded in 38 (28%). Mean IOP for the affected and unaffected eyes was 14±10.3 mm Hg and 16.6±4.1 mm Hg, respectively. Twenty-three (59.4%) eyes had IOP greater than 10 mm Hg. Six eyes (16.2%) had IOP greater than 21 mm Hg. Using bivariate analysis, IOP greater than 10 mm Hg was associated with posterior open globe injury (P=0.01), posterior hemorrhage (P=0.04), and intraconal retrobulbar hemorrhage (P=0.05). Adjusting for age, sex, and race, IOP greater than 10 mm Hg was associated with the presence of posterior open globe injury on clinical examination (P=0.04). Higher presenting IOP was found to predict light perception or worse vision (P=0.01). Multivariate analysis showed that poor presenting vision was the best predictor of poor final vision (Pglobe injury. It is a frequent finding in patients with open globe injuries and may be associated with posterior injury and poor visual prognosis.

  7. An inexpensive and innovative correction of medial compartmental osteoarthritis knee joint by high tibial lateral closed wedge osteotomy in a rural set up

    Directory of Open Access Journals (Sweden)

    Prasad DV, Arun AA, Tushar Chaudhari, Sagar Jawale, Shakthi Panda, Abhinav Jadhav, Deepak Dathrange

    2014-11-01

    Full Text Available Osteoarthritis of Knee joint with Varus deformity causes considerable disability. Operative treatment aims at shifting the mechanical load bearing axis to the less affected compartment of the knee to relieve the symptoms. Exclusion Criteria: Non-walkers due to generalized arthropathies / medical comorbidities, Flexion deformity > 10 degrees, Range of motion 1cm lateral subluxation in standing A-P X rays of both knees. Methodology: 32 (12 Males and 20 Females cases of Medial compartment osteoarthritis presenting in our OPD between 2008-2012 were treated by HTOand cortical screw and SS wire fixation (TBW Technique. Results: Evaluation of results was done based on knee rating scale by Japanese orthopaedic association. 22 cases were Excellent, 8 cases were good. One case of failure, an iatrogenic intracondylar fracture of Tibia, and another secondary haematoma under the suture line, aspirated and complete healing was achieved. Patients had good range of motion, were able to squat and sit cross legged comfortably. Conclusion: HTO by Closed Medial wedge osteotomy and fixation with cortical screw and SS wire provides a good alternative to unicompartmental knee Arthroplasty and even Total knee Arthroplasty (may be up to 10-15 years in patients with Medial compartmental osteoarthritis. It is a cost effective technique with the use of minimum hardware and early postoperative mobilization in patients who cannot afford Knee Arthroplasty in a Rural set up.

  8. Assessment of computerized treatment planning system accuracy in calculating wedge factors of physical wedged fields for 6 MV photon beams.

    Science.gov (United States)

    Muhammad, Wazir; Maqbool, Muhammad; Shahid, Muhammad; Hussain, Amjad; Tahir, Sajjad; Matiullah; Rooh, Gul; Ahmad, Tanveer; Lee, Sang Hoon

    2011-07-01

    Wedge filters are commonly used in external beam radiotherapy to achieve a uniform dose distribution within the target volume. The main objective of this study was to investigate the accuracy of the beam modifier algorithm of Theraplan plus (TPP version 3.8) treatment planning system and to confirm that either the beam hardening, beam softening and attenuation coefficients along with wedge geometry and measured wedge factor at single depth and multiple fields sizes can be the replacement of wedged profile and wedged cross-sectional data or not. In this regard the effect of beam hardening and beam softening was studied with physical wedges for 6 MV photons. The Normalized Wedge Factors (NWFs) were measured experimentally as well as calculated with the Theraplan plus, as a function of depth and field size in a water phantom for 15°, 30°, 45°, and 60° wedge filters. The beam hardening and softening was determined experimentally by deriving the required coefficients for all wedge angles. The TPP version 3.8 requires wedge transmission factor at single depth and multiple field sizes. Without incorporating the hardening and softening coefficients the percent difference between measured and calculated NFWs was as high as 7%. After the introduction of these parameters into the algorithm, the agreement between measured and TPP (V 3.8) calculated NWFs were improved to within 2 percent for various depths. Similar improvement was observed in TPP version 3.8 while calculating NWFs for various field sizes when the required coefficients were adjusted. In conclusion, the dose calculation algorithm of TPP version 3.8 showed good accuracy for a 6 MV photon beam provided beam hardening and softening parameters are taken into account. From the results, it is also concluded that, the beam hardening, beam softening and attenuation coefficients along with wedge geometry and measured wedge factor at single depth and multiple fields sizes can be the replacement of wedged profile and

  9. Casimir effect at nonzero temperature for wedges and cylinders

    CERN Document Server

    Ellingsen, Simen Å; Milton, Kimball A

    2010-01-01

    We consider the Casimir-Helmholtz free energy at nonzero temperature $T$ for a circular cylinder and perfectly conducting wedge closed by a cylindrical arc, either perfectly conducting or isorefractive. The energy expression at nonzero temperature may be regularized to obtain a finite value, except for a singular corner term in the case of the wedge which is present also at zero temperature. Assuming the medium in the interior of the cylinder or wedge be nondispersive with refractive index $n$, the temperature dependence enters only through the non-dimensional parameter $2\\pi naT$, $a$ being the radius of the cylinder or cylindrical arc. We show explicitly that the known zero temperature result is regained in the limit $aT\\to 0$ and that previously derived high temperature asymptotics for the cylindrical shell are reproduced exactly.

  10. Decollement controls on pro versus retro wedge deformation in mountain belts

    Science.gov (United States)

    Grool, Arjan; Huismans, Ritske S.; Ford, Mary

    2017-04-01

    Doubly vergent orogens have a pro-wedge (lower plate) and a retro-wedge (upper plate). Most shortening is accommodated on the pro-wedge while retro-wedge shortening is typically limited. For example, the Eastern Pyrenees have experienced about 145 km of convergence, of which about 125 km (86%) was accommodated in the pro-wedge and about 20 km (14%) in the retro-wedge. Strain partitioning between pro- and retro-wedge is influenced by several factors, some of which have been identified in past work: Extensional inheritance and syn-orogenic sedimentation can help to increase the percentage of total shortening accommodated in the retro-wedge while erosion promotes pro-wedge shortening. We use high-resolution 2D numerical models to investigate factors that control pro- versus retro-wedge shortening. For a total convergence similar to the Eastern Pyrenees, our models predict that variations in extensional inheritance and syn-orogenic sedimentation will result in a maximum of 10% of total shortening being accommodated in the retro-wedge. Here, we investigate the role of 1) the rheology and 2) distribution of a decollement layer. Our models show that: 1) Decollement rheology has a first order control on strain distribution between the pro- and the retro-wedge. After 145 km of total convergence, a model with a weak frictional (φ=2, shale-like) decollement will only accommodate 9% of total shortening in the retro-wedge. In contrast in models with a weak viscous (μ=1018, salt-like) decollement retro-wedge shortening amounts to 18% and a stronger, but still weak, viscous decollement (μ=1019) leads to 21%. 2) Décollement distribution influences the timing of the first outward propagation of thick-skinned deformation in the retro-wedge. In the Eastern Pyrenees, thick-skinned deformation propagated out into the retro-wedge within 145 km of total convergence. In models with a decollement on both sides of the orogen this only occurred after 240 km. If, as in the Eastern

  11. NASA/GE Collaboration on Open Rotors - High Speed Testing

    Science.gov (United States)

    VanZante, Dale E.

    2011-01-01

    A low-noise open rotor system is being tested in collaboration with General Electric and CFM International, a 50/50 joint company between Snecmaand GE. Candidate technologies for lower noise will be investigated as well as installation effects such as pylon integration. Current test status for the 8x6 SWT high speed testing is presented as well as future scheduled testing which includes the FAA/CLEEN test entry. The tunnel blockage and propeller thrust calibration configurations are shown.

  12. Characterization of InGaAs and InAlAs layers on InP by four-crystal high resolution X-ray diffraction and wedge transmission electron microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Houdre, R.; Gueissaz, F.; Gailhanou, M.; Ganiere, J.D.; Rudra, A.; Ilegems, M. (Inst. de Micro- et Optoelectronique, Ecole Polytechnique Federale de Lausanne (Switzerland))

    1991-05-01

    The indium desorption rates from InGaAs and InAlAs grown on InP substrates have been measured by wedge transmission electron microscopy as a function of the growth temperature. Desorption becomes significant at 545degC for both materials. No automatching effects could be observed under the growth conditions of the experiment. The bandgap of In{sub y}Al{sub 1-y}As has been measured at 77 K as a function of the indium content. The composition and the strain have been measured by four-crystal high resolution X-ray diffraction with symmetrical (004) and assymmetrical (115{+-}) Bragg reflections. The intrinsic bandgap follows the relation E{sub g}(y)=2.774-2.411y and the strained material the relation E{sub gs}(y)=0.671+5.236y-6.929y{sup 2}. (orig.).

  13. Open source high performance floating-point modules.

    Energy Technology Data Exchange (ETDEWEB)

    Underwood, Keith Douglas

    2006-02-01

    Given the logic density of modern FPGAs, it is feasible to use FPGAs for floating-point applications. However, it is important that any floating-point units that are used be highly optimized. This paper introduces an open source library of highly optimized floating-point units for Xilinx FPGAs. The units are fully IEEE compliant and achieve approximately 230 MHz operation frequency for double-precision add and multiply in a Xilinx Virtex-2-Pro FPGA (-7 speed grade). This speed is achieved with a 10 stage adder pipeline and a 12 stage multiplier pipeline. The area requirement is 571 slices for the adder and 905 slices for the multiplier.

  14. NGC 1252: a high altitude, metal poor open cluster remnant

    CERN Document Server

    Marcos, R de la Fuente; Bidin, C Moni; Carraro, G; Costa, E

    2013-01-01

    If stars form in clusters but most stars belong to the field, understanding the details of the transition from the former to the latter is imperative to explain the observational properties of the field. Aging open clusters are one of the sources of field stars. The disruption rate of open clusters slows down with age but, as an object gets older, the distinction between the remaining cluster or open cluster remnant (OCR) and the surrounding field becomes less and less obvious. As a result, finding good OCR candidates or confirming the OCR nature of some of the best candidates still remain elusive. One of these objects is NGC 1252, a scattered group of about 20 stars in Horologium. Here we use new wide-field photometry in the UBVI pass-bands, proper motions from the Yale/San Juan SPM 4.0 catalogue, and high resolution spectroscopy concurrently with results from N-body simulations to decypher NGC 1252's enigmatic character. Spectroscopy shows that most of the brightest stars in the studied area are chemically,...

  15. Characterization of CNRS Fizeau wedge laser tuner

    Science.gov (United States)

    A fringe detection and measurement system was constructed for use with the CNRS Fizeau wedge laser tuner, consisting of three circuit boards. The first board is a standard Reticon RC-100 B motherboard which is used to provide the timing, video processing, and housekeeping functions required by the Reticon RL-512 G photodiode array used in the system. The sampled and held video signal from the motherboard is processed by a second, custom fabricated circuit board which contains a high speed fringe detection and locating circuit. This board includes a dc level discriminator type fringe detector, a counter circuit to determine fringe center, a pulsed laser triggering circuit, and a control circuit to operate the shutter for the He-Ne reference laser beam. The fringe center information is supplied to the third board, a commercial single board computer, which governs the data collection process and interprets the results.

  16. The Gray Institute 'open' high-content, fluorescence lifetime microscopes.

    Science.gov (United States)

    Barber, P R; Tullis, I D C; Pierce, G P; Newman, R G; Prentice, J; Rowley, M I; Matthews, D R; Ameer-Beg, S M; Vojnovic, B

    2013-08-01

    We describe a microscopy design methodology and details of microscopes built to this 'open' design approach. These demonstrate the first implementation of time-domain fluorescence microscopy in a flexible automated platform with the ability to ease the transition of this and other advanced microscopy techniques from development to use in routine biology applications. This approach allows easy expansion and modification of the platform capabilities, as it moves away from the use of a commercial, monolithic, microscope body to small, commercial off-the-shelf and custom made modular components. Drawings and diagrams of our microscopes have been made available under an open license for noncommercial use at http://users.ox.ac.uk/~atdgroup. Several automated high-content fluorescence microscope implementations have been constructed with this design framework and optimized for specific applications with multiwell plates and tissue microarrays. In particular, three platforms incorporate time-domain FLIM via time-correlated single photon counting in an automated fashion. We also present data from experiments performed on these platforms highlighting their automated wide-field and laser scanning capabilities designed for high-content microscopy. Devices using these designs also form radiation-beam 'end-stations' at Oxford and Surrey Universities, showing the versatility and extendibility of this approach. © 2013 The Authors. Journal of Microscopy published by John Wiley & Sons Ltd on behalf of Royal Microscopical Society.

  17. Isolating active orogenic wedge deformation in the southern Subandes of Bolivia

    Science.gov (United States)

    Weiss, Jonathan R.; Brooks, Benjamin A.; Foster, James H.; Bevis, Michael; Echalar, Arturo; Caccamise, Dana; Heck, Jacob; Kendrick, Eric; Ahlgren, Kevin; Raleigh, David; Smalley, Robert; Vergani, Gustavo

    2016-08-01

    A new GPS-derived surface velocity field for the central Andean backarc permits an assessment of orogenic wedge deformation across the southern Subandes of Bolivia, where recent studies suggest that great earthquakes (>Mw 8) are possible. We find that the backarc is not isolated from the main plate boundary seismic cycle. Rather, signals from subduction zone earthquakes contaminate the velocity field at distances greater than 800 km from the Chile trench. Two new wedge-crossing velocity profiles, corrected for seasonal and earthquake affects, reveal distinct regions that reflect (1) locking of the main plate boundary across the high Andes, (2) the location of and loading rate at the back of orogenic wedge, and (3) an east flank velocity gradient indicative of décollement locking beneath the Subandes. Modeling of the Subandean portions of the profiles indicates along-strike variations in the décollement locked width (WL) and wedge loading rate; the northern wedge décollement has a WL of ~100 km while accumulating slip at a rate of ~14 mm/yr, whereas the southern wedge has a WL of ~61 km and a slip rate of ~7 mm/yr. When compared to Quaternary estimates of geologic shortening and evidence for Holocene internal wedge deformation, the new GPS-derived wedge loading rates may indicate that the southern wedge is experiencing a phase of thickening via reactivation of preexisting internal structures. In contrast, we suspect that the northern wedge is undergoing an accretion or widening phase primarily via slip on relatively young thrust-front faults.

  18. Consolidação da osteotomia valgizante proximal da tíbia com cunha de abertura fixada com placa "calço" de Anthony® Proximal tibial valgusing open-wedge osteotomy union fixated with Anthony® "support" plate

    Directory of Open Access Journals (Sweden)

    Cristiano Hossri Ribeiro

    2008-01-01

    Full Text Available OBJETIVO: Este estudo tem por finalidade verificar a consolidação da osteotomia valgizante da tíbia com cunha de abertura fixada com placa tipo calço de Anthony® (OVT, no tratamento da osteoartrose medial do joelho varo, a correção da deformidade e a resposta clínica ao tratamento cirúrgico. MÉTODOS: Vinte pacientes (vinte joelhos com osteoartrose do compartimento medial do joelho, com idade média de 48,4 ± 9,9, foram avaliados por um período mínimo de um ano. Os pacientes foram submetidos a avaliação radiográfica da consolidação e do eixo mecânico no pré e pós operatório, além da avaliação dos critérios de LYSHOLM. RESULTADOS: A consolidação da osteotomia ocorreu após 12 semanas em 100% dos casos sem complicações. A avaliação do LYSHOLM no pós operatório apresentou 80% de excelentes e bons resultados. A correção final média do eixo mecânico foi de 3,4 ± 3,3 graus de valgo. CONCLUSÃO: Concluímos que a consolidação da osteotomia supra-tuberositária da tíbia com cunha de abertura fixada com placa calço de Anthony® e com enxertia óssea tricortical ocorre num intervalo de três meses. A cirurgia é eficaz para a correção da deformidade em varo do joelho, e propicia melhora clínica significante para o paciente.OBJECTIVE: This paper aims to check the proximal tibial valgusing open-wedge osteotomy union with Anthony® plate for the treatment of bowleg with medial osteoarthrosis, final correction of the deformity and clinical improvement. METHODS: Twenty patients (twenty knees with medial osteoarthrosis of the knee, with mean age of 48.4 years, were evaluated for one year. The patients were submitted to the Lysholm's score, and also to X-ray studies before and after surgery. RESULTS: The osteotomy union occurred after 12 weeks in all cases without complications. The Lysholm's score was regarded as excellent or good in 80% of the cases. The postoperative mechanical alignment was 3.4 ± 3.3 valgus

  19. Open Access Publishing in High-Energy Physics

    CERN Document Server

    Mele, S

    2007-01-01

    The goal of Open Access (OA) is to grant anyone, anywhere and anytime free access to the results of scientific research. The High- Energy Physics (HEP) community has pioneered OA with its "pre-print culture": the mass mailing, first, and the online posting, later, of preliminary versions of its articles. After almost half a century of widespread dissemination of pre-prints, the time is ripe for the HEP community to explore OA publishing. Among other possible models, a sponsoring consortium appears as the most viable option for a transition of HEP peer-reviewed literature to OA. A Sponsoring Consortium for Open Access Publishing in Particle Physics (SCOAP3) is proposed as a central body which would remunerate publishers for the peer-review service, effectively replacing the "reader-pays" model of traditional subscriptions with an "author-side" funding. Funding to SCOAP3 would come from HEP funding agencies and library consortia through a re-direction of subscriptions. This model is discussed in details togethe...

  20. Composite wedge failure using photogrammetric measurements and DFN-DEM modelling

    Directory of Open Access Journals (Sweden)

    Viviana Bonilla-Sierra

    2017-02-01

    Full Text Available Analysis and prediction of structural instabilities in open pit mines are an important design and operational consideration for ensuring safety and productivity of the operation. Unstable wedges and blocks occurring at the surface of the pit walls may be identified through three-dimensional (3D image analysis combined with the discrete fracture network (DFN approach. Kinematic analysis based on polyhedral modelling can be used for first pass analysis but cannot capture composite failure mechanisms involving both structurally controlled and rock mass progressive failures. A methodology is proposed in this paper to overcome such limitations by coupling DFN models with geomechanical simulations based on the discrete element method (DEM. Further, high resolution photogrammetric data are used to identify valid model scenarios. An identified wedge failure that occurred in an Australian coal mine is used to validate the methodology. In this particular case, the failure surface was induced as a result of the rock mass progressive failure that developed from the toe of the structure inside the intact rock matrix. Analysis has been undertaken to determine in what scenarios the measured and predicted failure surfaces can be used to calibrate strength parameters in the model.

  1. Optical dating of relict sand wedges and composite-wedge pseudomorphs in Flanders, Belgium

    DEFF Research Database (Denmark)

    Buylaert, Jan-Pieter; Ghysels, Günther; Murray, Andrew S.;

    2009-01-01

    We report on quartz Optically Stimulated Luminescence (OSL) dating of the infill of 14 relict sand wedges and composite-wedge pseudomorphs at 5 different sites in Flanders, Belgium. A laboratory dose recovery test indicates that the single-aliquot regenerative-dose (SAR) procedure is suitable...... appear to have been commonplace in Flanders during the Late Pleniglacial (Oxygen Isotope Stage 2; OIS2); more specifically, around the Last Glacial Maximum (LGM, similar to 21 kyr ago) and the transition period between the LGM and the start of the Lateglacial (similar to 15 kyr ago). Optical dating...... at one site has revealed two significantly older wedge levels, the younger inset into the older; the younger wedge has an age of 36 +/- 4 kyr (Middle Pleniglacial; OIS3), the older wedge 129 +/- 11 kyr, which points to formation during the Late Saalian (OIS6). Our OSL ages of the wedges and host...

  2. Use of Wedge Absorbers in MICE

    Energy Technology Data Exchange (ETDEWEB)

    Neuffer, D. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Summers, D. [Univ. of Mississippi, Oxford, MS (United States); Mohayai, T. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); IIT, Chicago, IL (United States); Snopok, P. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); IIT, Chicago, IL (United States); Rogers, C. [Science and Technology Facilities Council (STFC), Oxford (United Kingdom). Rutherford Appleton Lab. (RAL)

    2017-03-01

    Wedge absorbers are needed to obtain longitudinal cooling in ionization cooling. They also can be used to obtain emittance exchanges between longitudinal and transverse phase space. There can be large exchanges in emittance, even with single wedges. In the present note we explore the use of wedge absorbers in the MICE experiment to obtain transverse–longitudinal emittance exchanges within present and future operational conditions. The same wedge can be used to explore “direct” and “reverse” emittance exchange dynamics, where direct indicates a configuration that reduces momentum spread and reverse is a configuration that increases momentum spread. Analytical estimated and ICOOL and G4BeamLine simulations of the exchanges at MICE parameters are presented. Large exchanges can be obtained in both reverse and direct configurations.

  3. Benchmarking numerical models of brittle thrust wedges

    NARCIS (Netherlands)

    Buiter, Susanne J H; Schreurs, Guido; Albertz, Markus; Gerya, Taras V.; Kaus, Boris; Landry, Walter; le Pourhiet, Laetitia; Mishin, Yury; Egholm, David L.; Cooke, Michele; Maillot, Bertrand; Thieulot, Cedric|info:eu-repo/dai/nl/270177493; Crook, Tony; May, Dave; Souloumiac, Pauline; Beaumont, Christopher

    2016-01-01

    We report quantitative results from three brittle thrust wedge experiments, comparing numerical results directly with each other and with corresponding analogue results. We first test whether the participating codes reproduce predictions from analytical critical taper theory. Eleven codes pass the

  4. Interpretation and inverse analysis of the wedge splitting test

    DEFF Research Database (Denmark)

    Østergaard, Lennart; Stang, Henrik

    2002-01-01

    Determination of the stress-crack opening relationship, s(w) a material parameter in the fictitious crack model by Hillerborg has proven to be problematic and is still not a simple task to perform. However, this paper demonstrates that the cracked non-linear hinge model by Olesen may be applied...... to the wedge splitting test and that it is well suited for the interpretation of test results in terms of s(w). A fine agreement between the hinge and FEM-models has been found. It has also been found that the test and the hinge model form a solid basis for inverse analysis. The paper also discusses possible...

  5. Verification of Varian Enhanced Dynamic Wedge implementation in masterplan treatment planning system.

    Science.gov (United States)

    Pasquino, Massimo; Casanova Borca, Valeria; Tofani, Santi; Ozzello, Franca

    2009-04-22

    This paper investigates the accuracy of the two available calculation algorithms of the Oncentra MasterPlan three-dimensional treatment planning system (TPS)-- the pencil beam method and collapsed-cone convolution--in modeling the Varian enhanced dynamic wedge (EDW). Measurements were carried out for a dual high energy (6-15 MV) Varian DHX-S linear accelerator using ionization chambers for beam axis measurements (wedge factors and depth doses), film dosimetry for off-axis dose profiles measurements, and a diode matrix detector for two dimensional absolute dose distributions. Using both calculation algorithms, different configuration of symmetric and asymmetric fields varying the wedge's angle were tested. Accuracy of the treatment planning system was evaluated in terms of percentage differences between measured and calculated values for wedge factors, depth doses, and profiles. As far as the absolute dose distribution was concerned, the gamma index method (Low et al.) was used with 3% and 3 mm as acceptance criteria for dose difference and distance-to-agreement, respectively. Wedge factors and percentage depth doses were within 1% deviation between calculated and measured values. The comparison of measured and calculated dose profiles shows that the Van Dyk's acceptance criteria (Van Dyk et al.) are generally met; a disagreement can be noted for large wedge angles and field size limited to the low dose-low gradient region only. The 2D absolute dose distribution analysis confirms the good accuracy of the two calculation algorithms in modeling the enhanced dynamic wedge.

  6. Spatial and temporal distribution of deformation at the front of the Andean orogenic wedge in Bolivia and implications for incremental wedge evolution

    Science.gov (United States)

    Weiss, J. R.; Brooks, B. A.; Vergani, G.; Arrowsmith, R.

    2012-12-01

    There is no consensus regarding how orogenic wedges accommodate deformation over seismo-tectonic timescales. Results from the Himalaya and Taiwan suggest differing mechanisms including localized deformation along a single wedge-front structure and distributed shortening across multiple structures respectively. Here we provide the first detailed constraints on the distribution and timing of deformation at the front of the Andean orogenic wedge using industry acquired seismic reflection data from the ~500-km-long thin-skinned fold-and-thrust belt of the Bolivian Subandes (BSA). Almost no information exists on the recent history of BSA wedge-front deformation despite the presence of multiple ~10-m-high topographic scarps on Holocene surfaces and a recent analysis of the GPS-derived velocity field, which suggests the frontal Mandeyapecua thrust fault system (MTFS) is capable of >Mw 8 earthquakes. We use stratigraphic relationships across fault-related folds to depict the onset of deformation for the complete suite of structures comprising the MTFS. For each structure we determine the uncertainty in timing using an envelope of seismic velocity models from ~70 well-logs and published Quaternary sedimentation rates for the region. We further explore fault geometry and fault slip parameters associated with the displacement field of seismic reflection horizons using elastic dislocation theory. Our analyses reveal the presence of at least eight distinct fault segments comprising the MTFS, including previously unrecognized subsurface thrust faults that have been active since ~1 Ma. Shortening rates are generally higher across the younger, northern portion of the fault system but across-strike, in a ~50-km-wide zone from west to east, no distinct pattern of deformation migration exists. We estimate the percentage of whole-wedge deformation accommodated by wedge-front structures using our new fault slip rates combined with the wedge-loading rate of ~10 mm/yr and place our

  7. A specially curved wedge for eliminating wedge angle effect in unsteady shock reflection

    Science.gov (United States)

    Wang, He; Zhai, Zhigang; Luo, Xisheng; Yang, Jiming; Lu, Xiyun

    2017-08-01

    A curved wedge with a specific shape is designed and manufactured to guarantee the wedge angle unvaried during the cylindrically converging shock moving along the wedge. Thus the variation of the wedge angle caused by the wedge will be eliminated in unsteady shock reflection. Different initial wedge angles are considered to observe regular reflection and Mach reflection. When Mach reflection occurs, it is found that direct Mach reflection is persisted over the wedge without wave pattern transitions, which differs from our previous work with varied wedge angles [Zhang et al. "Reflection of cylindrical converging shock wave over a plane wedge," Phys. Fluids 28, 086101 (2016)]. Moreover, the Mach stem is nearly straight when the wedge angle is relatively large, and the trajectory of triple point can be well predicted by three-shock theory. It is believed that the straight Mach stem results from the coupling effect of the converging shock and the convexly curved wedge, which exert opposite effects on the Mach stem curvature. As the wedge angle reduces, the three-shock theory prediction deviates from the present results owing to the curved Mach stem. Stronger vortices are produced near the wall, which are caused by the interaction of two shear layers, and whether the stronger vortices will be generated near the wall depends on the reflection number of the shock wave over the tube wall and wedge. The length of disturbed shock front in the Mach reflection is found to increase nonlinearly due to the unsteady feature of the flow. The growth rate of length reduces as the shock converges because of the geometrical contraction effect. Further the lengths of the Mach stem and the disturbed shock front are compared, and the results show that although the difference exists between them, both of them show a similar variation tendency. Compared with our previous work with varied wedge angles, the variation of the wedge angle has great effects on the Mach stem length and wave

  8. Mantle wedge dynamics from seismic anisotropy (Invited)

    Science.gov (United States)

    Long, M. D.; Wirth, E. A.

    2013-12-01

    The mantle wedge above subducting slabs plays a critical role in many of the physical processes associated with subduction, including water transport into the upper mantle and the generation and transport of melts. Our understanding of mantle wedge dynamics is incomplete; in particular, the mantle flow field above subducting slabs remains poorly understood. Because seismic anisotropy is a consequence of deformation, observations of anisotropy (such as shear wave splitting and P-to-SH converted waves) can constrain the geometry of the wedge flow field. Additionally, because the presence of water (either in nominally anhydrous minerals or as hydrous phases) can have a large effect on anisotropic structure, a detailed understanding of mantle wedge anisotropy can help to constrain processes related to water cycling in subduction systems. We present a global, synoptic view of anisotropy observations in subduction zone mantle wedges, compiled from a large number of individual studies, with the goal of understanding the first-order controls on wedge anisotropy and flow patterns. This compilation allows us to explicitly test the predictions made by many different conceptual models for wedge anisotropy, as well as to explore the relationships between observed anisotropy parameters and other parameters that describe subduction. We find that no simple model can explain all of the trends observed in the global data set. Mantle wedge flow is likely controlled by a combination of downdip motion of the slab, trench migration, ambient mantle flow, small-scale convection, proximity to slab edges, and slab morphology, with the relative contributions of these in any given subduction system controlled by the subduction kinematics and mantle rheology. There is also a likely contribution from B-type olivine and/or serpentinite fabric in many subduction zones, governed by the local thermal structure and volatile distribution.

  9. Long-range hybrid wedge plasmonic waveguide.

    Science.gov (United States)

    Zhang, Zhonglai; Wang, Jian

    2014-11-03

    We design a novel long-range hybrid wedge plasmonic (LRHWP) waveguide composed of two identical dielectric nanowires symmetrically placed on two opposed wedges of a diamond shaped metal wire. With strong coupling between the dielectric nanowire mode and long-range surface plasmon polariton (SPP) mode, both deep subwavelength mode confinement and low propagation loss are achieved. On one hand, when compared to the previous long-range hybrid SPP waveguide, LRHWP waveguide can achieve smaller mode size with similar propagation length; on the other hand, when compared to the previous hybrid wedge SPP waveguide, LRHWP waveguide can provide an order of magnitude longer propagation length with similar level of mode confinement. The designed LRHWP waveguide also features an overall advantage of one-order improvement of Figure of Merit. We further evaluate in detail the impacts of possible practical fabrication imperfections on the mode properties. The obtained results of mode properties show that the proposed LRHWP waveguide with an optimized wedge tip angle of 140 degree is fairly tolerant to practical fabrication errors in geometry parameters such as misalignment in the horizontal direction, asymmetry in the vertical direction, variation of wedge tip angle, tilt or rotation of metal wire, and variation of wedge tip curvature radius.

  10. High-powered conveyor systems: long distance, downhill, open-pit, and high capacity conveyors

    Energy Technology Data Exchange (ETDEWEB)

    Pelzer, H.K.

    1978-01-01

    Paper indicates the conditions under which belt conveyors are superior to other forms of transport, the limitations of these conveyors. Long distance, downhill, open-pit and high capacity conveyor installations are described, including a 60-mile long conveyor in the Sahara.

  11. Mantle wedge serpentinization effects on slab dips

    Directory of Open Access Journals (Sweden)

    Eh Tan

    2017-01-01

    Full Text Available The mechanical coupling between a subducting slab and the overlying mantle wedge is an important factor in controlling the subduction dip angle and the flow in mantel wedge. This paper investigates the role of the amount of mantle serpentinization on the subduction zone evolution. With numerical thermos-mechanical models with elasto-visco-plastic rheology, we vary the thickness and depth extent of mantle serpentinization in the mantle wedge to control the degree of coupling between the slab and mantle wedge. A thin serpentinized mantle layer is required for stable subduction. For models with stable subduction, we find that the slab dip is affected by the down-dip extent and the mantle serpentinization thickness. A critical down-dip extent exists in mantle serpentinization, determined by the thickness of the overriding lithosphere. If the down-dip extent does not exceed the critical depth, the slab is partially coupled to the overriding lithosphere and has a constant dip angle regardless of the mantle serpentinization thickness. However, if the down-dip extent exceeds the critical depth, the slab and the base of the overriding lithosphere would be separated and decoupled by a thick layer of serpentinized peridotite. This allows further slab bending and results in steeper slab dip. Increasing mantle serpentinization thickness will also result in larger slab dip. We also find that with weak mantle wedge, there is no material flowing from the asthenosphere into the serpentinized mantle wedge. All of these results indicate that serpentinization is an important ingredient when studying the subduction dynamics in the mantle wedge.

  12. Open ISEmeter: An open hardware high-impedance interface for potentiometric detection

    Energy Technology Data Exchange (ETDEWEB)

    Salvador, C.; Carbajo, J.; Mozo, J. D., E-mail: jdaniel.mozo@diq.uhu.es [Applied Electrochemistry Laboratory, Faculty of Experimental Sciences, University of Huelva, Av. 3 de Marzo s/n., 21007 Huelva (Spain); Mesa, M. S.; Durán, E. [Department of Electronics Engineering, Computers and Automatic, ETSI, University of Huelva, Campus de La Rabida, 21810 Huelva (Spain); Alvarez, J. L. [Department of Information Technologies, ETSI, University of Huelva, Campus de La Rabida, 21810 Huelva (Spain)

    2016-05-15

    In this work, a new open hardware interface based on Arduino to read electromotive force (emf) from potentiometric detectors is presented. The interface has been fully designed with the open code philosophy and all documentation will be accessible on web. The paper describes a comprehensive project including the electronic design, the firmware loaded on Arduino, and the Java-coded graphical user interface to load data in a computer (PC or Mac) for processing. The prototype was tested by measuring the calibration curve of a detector. As detection element, an active poly(vinyl chloride)-based membrane was used, doped with cetyltrimethylammonium dodecylsulphate (CTA{sup +}-DS{sup −}). The experimental measures of emf indicate Nernstian behaviour with the CTA{sup +} content of test solutions, as it was described in the literature, proving the validity of the developed prototype. A comparative analysis of performance was made by using the same chemical detector but changing the measurement instrumentation.

  13. Direct FVM Simulation for Sound Propagation in an Ideal Wedge

    Directory of Open Access Journals (Sweden)

    Hongyu Ji

    2016-01-01

    Full Text Available The sound propagation in a wedge-shaped waveguide with perfectly reflecting boundaries is one of the few range-dependent problems with an analytical solution. This provides a benchmark for the theoretical and computational studies on the simulation of ocean acoustic applications. We present a direct finite volume method (FVM simulation for the ideal wedge problem, and both time and frequency domain results are analyzed. We also study the broadband problem with large-scale parallel simulations. The results presented in this paper validate the accuracy of the numerical techniques and show that the direct FVM simulation could be applied to large-scale complex acoustic applications with a high performance computing platform.

  14. Wettability patterning for high-rate, pumpless fluid transport on open, non-planar microfluidic platforms.

    Science.gov (United States)

    Ghosh, Aritra; Ganguly, Ranjan; Schutzius, Thomas M; Megaridis, Constantine M

    2014-05-07

    Surface tension driven transport of liquids on open substrates offers an enabling tool for open micro total analysis systems that are becoming increasingly popular for low-cost biomedical diagnostic devices. The present study uses a facile wettability patterning method to produce open microfluidic tracks that - due to their shape, surface texture and chemistry - are capable of transporting a wide range of liquid volumes (~1-500 μL) on-chip, overcoming viscous and other opposing forces (e.g., gravity) at the pertinent length scales. Small volumes are handled as individual droplets, while larger volumes require repeated droplet transport. The concept is developed and demonstrated with coatings based on TiO2 filler particles, which, when present in adequate (~80 wt.%) quantities within a hydrophobic fluoroacrylic polymer matrix, form composites that are intrinsically superhydrophobic. Such composite coatings become superhydrophilic upon exposure to UV light (390 nm). A commercial laser printer-based photo-masking approach is used on the coating for spatially selective wettability conversion from superhydrophobic to superhydrophilic. Carefully designed wedge-patterned surface tension confined tracks on the open-air devices move liquid on them without power input, even when acting against gravity. Simple designs of wettability patterning are used on versatile substrates (e.g., metals, polymers, paper) to demonstrate complex droplet handling tasks, e.g., merging, splitting and metered dispensing, some of which occur in 3-D geometries. Fluid transport rates of up to 350 μL s(-1) are attained. Applicability of the design on metal substrates allows these devices to be used also for other microscale engineering applications, e.g., water management in fuel cells.

  15. Wedged tibial components for total knee arthroplasty.

    Science.gov (United States)

    Jeffery, R S; Orton, M A; Denham, R A

    1994-08-01

    Severe coronal deformity of the knee is frequently associated with erosion of one tibial condyle. This can cause problems with fixation and alignment during total knee arthroplasty. If the tibia is cut to the level of the more worn side, valuable bone is sacrificed; if the less worn side is chosen, the deficiency must be filled with bone--graft, cement, or a prosthesis. Tibial components with an integral polyethylene wedge on the undersurface were introduced in 1980 for use in patients with a bony deficit on one tibial condyle. The authors believe that the Denham prosthesis (Biomet, Wales, U.K.) was the first knee arthroplasty to offer such spacers. Twenty-six patients with preoperative varus deformity in whom a wedged component was used were compared with 29 historic control subjects. None of the wedged components loosened after a median follow-up period of 8 years compared with loosening in five of the control subjects (P = .01). In three of the control subjects a fractured triangle of cement was present on the radiographs. Use of the wedges was not accompanied by an improvement in postoperative alignment. The authors conclude that the wedges resulted in improved fixation that was independent of postoperative alignment.

  16. Confidentiality, Integrity and High Availability with Open Source IT green

    CERN Document Server

    Guimaraes, Luciana

    2008-01-01

    This paper presents elements that form the structure of a network of data using secure stable and mature technologies that meet the requirement of having code free. The principle would be conflicting code open Tuesday where he wants to keep maximum control over the data but is already evidence that open source does not hide the famous backdoor possible in closed systems code. Basearemos this work experience gained in a real environment and using paravirtualization to show a situation more critical and now real in most companies, the virtualization of servers.

  17. Long range hybrid tube-wedge plasmonic waveguide with extreme light confinement and good fabrication error tolerance.

    Science.gov (United States)

    Ding, Li; Qin, Jin; Xu, Kai; Wang, Liang

    2016-02-22

    We studied a novel long range hybrid tube-wedge plasmonic (LRHTWP) waveguide consisting of a high index dielectric nanotube placed above a triangular metal wedge substrate. Using comprehensive numerical simulations on guiding properties of the designed waveguide, it is found that extreme light confinement and low propagation loss are obtained due to strong coupling between dielectric nanotube mode and wedge plasmon polariton. Comparing with previous studied hybrid plasmonic waveguides, the LRHTWP waveguide has longer propagation length and tighter mode confinement. In addition, the LRHTWP waveguide is quite tolerant to practical fabrication errors such as variation of the wedge tip angle and the horizontal misalignment between the nanotube and the metal wedge. The proposed LRHTWP waveguide could have many application potentials for various high performance nanophotonic components.

  18. Rainfall induced groundwater mound in wedge-shaped promontories: The Strack-Chernyshov model revisited

    Science.gov (United States)

    Kacimov, A. R.; Kayumov, I. R.; Al-Maktoumi, A.

    2016-11-01

    An analytical solution to the Poisson equation governing Strack's discharge potential (squared thickness of a saturated zone in an unconfined aquifer) is obtained in a wedge-shaped domain with given head boundary conditions on the wedge sides (specified water level in an open water body around a porous promontory). The discharge vector components, maximum elevation of the water table in promontory vertical cross-sections, quantity of groundwater seeping through segments of the wedge sides, the volume of fresh groundwater in the mound are found. For acute angles, the solution to the problem is non-unique and specification of the behaviour at infinity is needed. A "basic" solution is distinguished, which minimizes the water table height above a horizontal bedrock. MODFLOW simulations are carried out in a finite triangular island and compare solutions with a constant-head, no-flow and "basic" boundary condition on one side of the triangle. Far from the tip of an infinite-size promontory one has to be cautious with truncation of the simulated flow domains and imposing corresponding boundary conditions. For a right and obtuse wedge angles, there are no positive solutions for the case of constant accretion on the water table. In a particular case of a confined rigid wedge-shaped aquifer and incompressible fluid, from an explicit solution to the Laplace equation for the hydraulic head with arbitrary time-space varying boundary conditions along the promontory rays, essentially 2-D transient Darcian flows within the wedge are computed. They illustrate that surface water waves on the promontory boundaries can generate strong Darcian waves inside the porous wedge. Evaporation from the water table and sea-water intruded interface (rather than a horizontal bed) are straightforward generalizations for the Poissonian Strack potential.

  19. Transforming High School Classrooms with Free/Open Source Software: "It's Time for an Open Source Software Revolution"

    Science.gov (United States)

    Pfaffman, Jay

    2008-01-01

    Free/Open Source Software (FOSS) applications meet many of the software needs of high school science classrooms. In spite of the availability and quality of FOSS tools, they remain unknown to many teachers and utilized by fewer still. In a world where most software has restrictions on copying and use, FOSS is an anomaly, free to use and to…

  20. Explicit reconstruction of the entanglement wedge

    CERN Document Server

    Kim, Jung-Wook

    2016-01-01

    The problem of bulk locality, or how the boundary encodes the bulk in AdS/CFT, is still a subject of study today. One of the major issues that needs more elucidation is the problem of subregion duality; what information of the bulk a given boundary subregion encodes. Although proofs given by two teams of researchers, Dong, Harlow, and Wall and Bao, and Kim, state that the entanglement wedge of the bulk should be reconstructible from boudnary subregions, no explicit procedure for reconstructing the entanglement wedge was as of yet given. In this paper, mode sum approach to obtaining smearing functions is generalised to include bulk reconstruction in the entanglement wedge of boundary subregions. It is generally expectated that solutions to the wave equation on a complicated coordinate patch are needed, but this hard problem has been transferred to a less hard but tractable problem of matrix inversion.

  1. A review of dynamics modelling of friction wedge suspensions

    Science.gov (United States)

    Wu, Qing; Cole, Colin; Spiryagin, Maksym; Sun, Yan Quan

    2014-11-01

    Three-piece bogies with friction wedge suspensions are the most widely used bogies in heavy haul trains. Fiction wedge suspensions play a key role in these wagon systems. This article reviews current techniques in dynamic modelling of friction wedge suspension with various motivations: to improve dynamic models of friction wedge suspensions so as to improve general wagon dynamics simulations; to seek better friction wedge suspension models for wagon stability assessments in complex train systems; to improve the modelling of other friction devices, such as friction draft gear. Relevant theories and friction wedge suspension models developed by using commercial simulation packages and in-house simulation packages are reviewed.

  2. OpenACC to FPGA: A Framework for Directive-based High-Performance Reconfigurable Computing

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Seyong [ORNL; Kim, Jungwon [ORNL; Vetter, Jeffrey S [ORNL

    2016-01-01

    This paper presents a directive-based, high-level programming framework for high-performance reconfigurable computing. It takes a standard, portable OpenACC C program as input and generates a hardware configuration file for execution on FPGAs. We implemented this prototype system using our open-source OpenARC compiler; it performs source-to-source translation and optimization of the input OpenACC program into an OpenCL code, which is further compiled into a FPGA program by the backend Altera Offline OpenCL compiler. Internally, the design of OpenARC uses a high- level intermediate representation that separates concerns of program representation from underlying architectures, which facilitates portability of OpenARC. In fact, this design allowed us to create the OpenACC-to-FPGA translation framework with minimal extensions to our existing system. In addition, we show that our proposed FPGA-specific compiler optimizations and novel OpenACC pragma extensions assist the compiler in generating more efficient FPGA hardware configuration files. Our empirical evaluation on an Altera Stratix V FPGA with eight OpenACC benchmarks demonstrate the benefits of our strategy. To demonstrate the portability of OpenARC, we show results for the same benchmarks executing on other heterogeneous platforms, including NVIDIA GPUs, AMD GPUs, and Intel Xeon Phis. This initial evidence helps support the goal of using a directive-based, high-level programming strategy for performance portability across heterogeneous HPC architectures.

  3. High School Open On-Line Courses (HOOC): A Case Study from Italy

    Science.gov (United States)

    Canessa, Enrique; Pisani, Armando

    2013-01-01

    The first implementation of complete high school, open on-line courses (HOOC) aiming to support the training and basic scientific knowledge of young students from the Liceo Ginnasio Dante Alighieri in Gorizia, Italy, is discussed. Using the open source and automated recording system openEyA, HOOC give a student the opportunity to watch on-line, at…

  4. Wedge Shock and Nozzle Exhaust Plume Interaction in a Supersonic Jet Flow

    Science.gov (United States)

    Castner, Raymond; Zaman, Khairul; Fagan, Amy; Heath, Christopher

    2014-01-01

    Fundamental research for sonic boom reduction is needed to quantify the interaction of shock waves generated from the aircraft wing or tail surfaces with the nozzle exhaust plume. Aft body shock waves that interact with the exhaust plume contribute to the near-field pressure signature of a vehicle. The plume and shock interaction was studied using computational fluid dynamics and compared with experimental data from a coaxial convergent-divergent nozzle flow in an open jet facility. A simple diamond-shaped wedge was used to generate the shock in the outer flow to study its impact on the inner jet flow. Results show that the compression from the wedge deflects the nozzle plume and shocks form on the opposite plume boundary. The sonic boom pressure signature of the nozzle exhaust plume was modified by the presence of the wedge. Both the experimental results and computational predictions show changes in plume deflection.

  5. Graphene Plasmons in Triangular Wedges and Grooves

    DEFF Research Database (Denmark)

    Gonçalves, P. A. D.; Dias, E. J. C.; Xiao, Sanshui

    2016-01-01

    and electric-field distributions. We have found that the dispersion of wedge/groove graphene plasmons follows the same functional dependence as their flat-graphene plasmon counterparts, but now scaled by a (purely) geometric factor in which all the information about the system’s geometry is contained. We...... and tunability of graphene plasmons guided along the apex of a graphene-covered dielectric wedge or groove. In particular, we present a quasi-analytic model to describe the plasmonic eigenmodes in such a system, including the complete determination of their spectrum and corresponding induced potential...

  6. American Society of Biomechanics Clinical Biomechanics Award 2013: tibiofemoral contact location changes associated with lateral heel wedging--a weight bearing MRI study.

    Science.gov (United States)

    Barrance, Peter J; Gade, Venkata; Allen, Jerome; Cole, Jeffrey L

    2014-11-01

    Vertically open magnetic resonance imaging permits study of knee joint contact during weight bearing. Lateral wedging is a low cost intervention for knee osteoarthritis that may influence load distribution and contact. This study assessed the ability of feedback-assisted weight bearing magnetic resonance imaging to detect changes in tibiofemoral contact associated with lateral wedging. One knee in each of fourteen subjects with symptomatic knee osteoarthritis was studied, without specification of compartmental involvement. Knees were imaged during upright standing and at 20° knee flexion. Bilateral external heel wedges were used to provide non-wedged and 5° lateral wedging conditions. Computer modeling was used to measure the medial and lateral compartment contact patch center coordinates on the tibial plateau and the respective contact areas. Lateral heel wedging in flexion was associated with a significant anterior shift of the contact patch of the lateral femoral condyle. Changes with knee flexion were similar to previous reports: both medial and lateral contact centers moved posteriorly with flexion, and lateral condyle contact also moved laterally. Lateral condyle contact area significantly reduced with flexion, while lateral wedging did not significantly affect contact areas. In symptomatic knee osteoarthritis patients standing in knee flexion, weight bearing magnetic resonance imaging recorded an anterior shift of lateral condyle contact in response to lateral heel wedging. Future studies may investigate lateral wedging effects more specifically in candidates for this clinical intervention. Copyright © 2014 Elsevier Ltd. All rights reserved.

  7. Assessment of a multibeam Fizeau wedge interferometer for Doppler wind lidar.

    Science.gov (United States)

    McKay, Jack A

    2002-03-20

    The Fabry-Perot interferometer is the standard instrument for the direct detection Doppler lidar measurement of atmospheric wind speeds. The multibeam Fizeau wedge has some practical advantages over the Fabry-Perot, such as the linear fringe pattern, and is evaluated for this application. The optimal Fizeau must have a resolving power of 10(6) or more. As the multibeam Fizeau wedge is pushed to such high resolving power, the interference fringes of the device become complicated by asymmetry and secondary maxima. A simple condition for the interferometer plate reflectance, optical gap, and wedge angle reveals whether a set of parameters will yield simple, Airy-like fringes or complex Fizeau fringes. Tilting of the Fizeau wedge improves the fringe shape and permits an extension of the regime of Airy-like fringes to higher resolving power. Sufficient resolving power for the wind lidar application is shown to be possible with a large-gap, low-finesse multibeam Fizeau wedge. Liabilities of the multibeam Fizeau wedge in the wind lidar application include a smaller acceptance solid angle and calibration sensitivity to localized deviations of the plates from the ideal.

  8. Robustness of oscillatory α2 dynamos in spherical wedges

    Science.gov (United States)

    Cole, E.; Brandenburg, A.; Käpylä, P. J.; Käpylä, M. J.

    2016-10-01

    Context. Large-scale dynamo simulations are sometimes confined to spherical wedge geometries by imposing artificial boundary conditions at high latitudes. This may lead to spatio-temporal behaviours that are not representative of those in full spherical shells. Aims: We study the connection between spherical wedge and full spherical shell geometries using simple mean-field dynamos. Methods: We solve the equations for one-dimensional time-dependent α2 and α2Ω mean-field dynamos with only latitudinal extent to examine the effects of varying the polar angle θ0 between the latitudinal boundaries and the poles in spherical coordinates. Results: In the case of constant α and ηt profiles, we find oscillatory solutions only with the commonly used perfect conductor boundary condition in a wedge geometry, while for full spheres all boundary conditions produce stationary solutions, indicating that perfect conductor conditions lead to unphysical solutions in such a wedge setup. To search for configurations in which this problem can be alleviated we choose a profile of the turbulent magnetic diffusivity that decreases toward the poles, corresponding to high conductivity there. Oscillatory solutions are now achieved with models extending to the poles, but the magnetic field is strongly concentrated near the poles and the oscillation period is very long. By changing both the turbulent magnetic diffusivity and α profiles so that both effects are more concentrated toward the equator, we see oscillatory dynamos with equatorward drift, shorter cycles, and magnetic fields distributed over a wider range of latitudes. Those profiles thus remove the sensitive and unphysical dependence on θ0. When introducing radial shear, we again see oscillatory dynamos, and the direction of drift follows the Parker-Yoshimura rule. Conclusions: A reduced α effect near the poles with a turbulent diffusivity concentrated toward the equator yields oscillatory dynamos with equatorward migration and

  9. Highly dynamically evolved intermediate-age open clusters

    CERN Document Server

    Piatti, Andrés E; Sampedro, Laura M

    2016-01-01

    We present a comprehensive UBVRI and Washington CT1T2 photometric analysis of seven catalogued open clusters, namely: Ruprecht 3, 9, 37, 74, 150, ESO 324-15 and 436-2. The multi-band photometric data sets in combination with 2MASS photometry and Gaia astrometry for the brighter stars were used to estimate their structural parameters and fundamental astrophysical properties. We found that Ruprecht 3 and ESO 436-2 do not show self-consistent evidence of being physical systems. The remained studied objects are open clusters of intermediate-age (9.0 < log(t yr-1) < 9.6), of relatively small size (r_cls ~ 0.4 - 1.3 pc) and placed between 0.6 and 2.9 kpc from the Sun. We analized the relationships between core, half-mass, tidal and Jacoby radii as well as half-mass relaxation times to conclude that the studied clusters are in an evolved dynamical stage. The cluster masses obtained by summing those of the observed cluster stars resulted to be ~ 10-15 per cent of the masses of open clusters of similar age locat...

  10. Highly dynamically evolved intermediate-age open clusters

    Science.gov (United States)

    Piatti, Andrés E.; Dias, Wilton S.; Sampedro, Laura M.

    2017-04-01

    We present a comprehensive UBVRI and Washington CT1T2 photometric analysis of seven catalogued open clusters, namely: Ruprecht 3, 9, 37, 74, 150, ESO 324-15 and 436-2. The multiband photometric data sets in combination with 2MASS photometry and Gaia astrometry for the brighter stars were used to estimate their structural parameters and fundamental astrophysical properties. We found that Ruprecht 3 and ESO 436-2 do not show self-consistent evidence of being physical systems. The remained studied objects are open clusters of intermediate age (9.0 ≤ log(t yr-1) ≤ 9.6), of relatively small size (rcls ∼ 0.4-1.3 pc) and placed between 0.6 and 2.9 kpc from the Sun. We analysed the relationships between core, half-mass, tidal and Jacoby radii as well as half-mass relaxation times to conclude that the studied clusters are in an evolved dynamical stage. The total cluster masses obtained by summing those of the observed cluster stars resulted to be ∼10-15 per cent of the masses of open clusters of similar age located closer than 2 kpc from the Sun. We found that cluster stars occupy volumes as large as those for tidally filled clusters.

  11. Planejamento pré-operatório e técnica cirúrgica da osteotomia supracondiliana varizante de adição do fêmur para correção do geno valgo e fixação com implante de ângulo fixo Pre-operative planning and surgical technique of the open wedge supracondylar osteotomy for correction of valgus knee and fixation with a fixed-angle implant

    Directory of Open Access Journals (Sweden)

    Cleber Antonio Jansen Paccola

    2010-01-01

    Full Text Available É apresentado o planejamento pré-operatório passo a passo da osteotomia de abertura supracondiliana do fêmur para a correção precisa do eixo de carga do membro inferior usando um implante de ângulo fixo (placa lâmina AO 95º. Também é apresentada a técnica cirúrgica e a utilização de enxerto ósseo do próprio local para o preenchimento da falha.The pre-operative planning is presented in a step by step fashion and the surgical technique of the lateral open wedge supracondylar femoral osteotomy for correction of the valgus knee using a fixed angle implant (95º AO angled blade plate. A surgical method for filling in the defect using an autologous bone graft is also presented.

  12. Benchmarking numerical models of brittle thrust wedges

    NARCIS (Netherlands)

    Buiter, Susanne J H; Schreurs, Guido; Albertz, Markus; Gerya, Taras V.; Kaus, Boris; Landry, Walter; le Pourhiet, Laetitia; Mishin, Yury; Egholm, David L.; Cooke, Michele; Maillot, Bertrand; Thieulot, Cedric; Crook, Tony; May, Dave; Souloumiac, Pauline; Beaumont, Christopher

    2016-01-01

    We report quantitative results from three brittle thrust wedge experiments, comparing numerical results directly with each other and with corresponding analogue results. We first test whether the participating codes reproduce predictions from analytical critical taper theory. Eleven codes pass the s

  13. PARADOX SOLUTION ON ELASTIC WEDGE DISSIMILAR MATERIALS

    Institute of Scientific and Technical Information of China (English)

    姚伟岸; 张兵茹

    2003-01-01

    According to the Hellinger-Reissner variational principle and introducing proper transformation of variables, the problem on elastic wedge dissimilar materials can be led to Hamiltonian system, so the solution of the problem can be got by employing the separation of variables method and symplectic eigenfunction expansion under symplectic space, which consists of original variables and their dual variables. The eigenvalue - 1 is a special one of all symplectic eigenvalue for Hamiltonian system in polar coordinate. In general, the eigenvalue - is a single eigenvalue, and the classical solution of an elastic wedge dissimilar materials subjected to a unit concentrated couple at the vertex is got directly by solving the eigenfunction vector for eigenvalue - 1 . But the eigenvalue - 1 becomes a double eigenvalue when the vertex angles and modulus of the materials satisfy certain definite relationships and the classical solution for the stress distribution becomes infinite at this moment, that is, the paradox should occur. Here the Jordan form eigenfunction vector for eigenvalue - 1 exists, and solution of the paradox on elastic wedge dissimilar materials subjected to a unit concentrated couple at the vertex is obtained directly by solving this special Jordan form eigenfunction. The result shows again that the solutions of the special paradox on elastic wedge in the classical theory of elasticity are just Jordan form solutions in symplectic space under Hamiltonian system.

  14. Late Holocene stable-isotope based winter temperature records from ice wedges in the Northeast Siberian Arctic

    Science.gov (United States)

    Opel, Thomas; Meyer, Hanno; Laepple, Thomas; Dereviagin, Alexander Yu.

    2016-04-01

    The Arctic is currently undergoing an unprecedented warming. This highly dynamic response on changes in climate forcing and the global impact of the Arctic water, carbon and energy balances make the Arctic a key region to study past, recent and future climate changes. Recent proxy-based temperature reconstructions indicate a long-term cooling over the past about 8 millennia that is mainly related to a decrease in solar summer insolation and has been reversed only by the ongoing warming. Climate model results on the other hand show no significant change or even a slight warming over this period. This model-proxy data mismatch might be caused by a summer bias of the used climate proxies. Ice wedges may provide essential information on past winter temperatures for a comprehensive seasonal picture of Holocene Arctic climate variability. Polygonal ice wedges are a widespread permafrost feature in the Arctic tundra lowlands. Ice wedges form by the repeated filling of thermal contraction cracks with snow melt water, which quickly refreezes at subzero ground temperatures and forms ice veins. As the seasonality of frost cracking and infill is generally related to winter and spring, respectively, the isotopic composition of wedge ice is indicative of past climate conditions during the annual cold season (DJFMAM, hereafter referred to as winter). δ18O of ice is interpreted as proxy for regional surface air temperature. AMS radiocarbon dating of organic remains in ice-wedge samples provides age information to generate chronologies for single ice wedges as well as regionally stacked records with an up to centennial resolution. In this contribution we seek to summarize Holocene ice-wedge δ18O based temperature information from the Northeast Siberian Arctic. We strongly focus on own work in the Laptev Sea region but consider as well literature data from other regional study sites. We consider the stable-isotope composition of wedge ice, ice-wedge dating and chronological

  15. Radiotherapy treatment planning with dynamic wedges--an algorithm for generating wedge factors and beam data.

    Science.gov (United States)

    Thomas, S J; Foster, K R

    1995-09-01

    If the jaws of a linear accelerator are moved under computer control during irradiation, dose distributions similar to those with wedge filters can be produced. Varian linear accelerators utilize this effect to give a 'dynamic wedge', using segmented treatment tables (STTs). An algorithm is described to generate the dose per monitor unit at any point in a beam, using the STT values. Dynamically wedged beams are modelled as the superposition of static asymmetric beams, using an algorithm based on beam data measured for symmetric beams. Predictions of wedge factors, depth doses and profiles generated using the algorithm are compared with measurements. Good agreement is found between predictions and measurements. The calculation time is typically 5 ms/dose point on a PC with a 486DX processor.

  16. A comparison of exact TM plane wave diffraction by coated wedges and impedance wedges

    DEFF Research Database (Denmark)

    Andersen, Lars S.; Breinbjerg, Olav; Moore, John T.

    1996-01-01

    without interference from direct fields or reflected fields. Results have been obtained in the case of illumination by a transverse magnetic (TM) uniform plane wave. The analysis of the coated wedge is based on an integral equation formulation combined with a hybrid technique, while the analysis......The purpose of this work is to numerically investigate the accuracy of the standard impedance boundary condition (SIBC) approximation for edge diffraction. To this end, we compare the scattering by coated wedges and SIBC wedges for which the diffracted field from a single edge can be observed...... of the SIBC wedge is based on Maliuzhinets' solution. Comparisons have been carried out for a series of configurations including lossy coatings as well as lossless coatings permitting unattenuated propagation of surface waves. The results show that the presence of an edge in a coated structure does...

  17. Benchmarking numerical models of brittle thrust wedges

    Science.gov (United States)

    Buiter, Susanne J. H.; Schreurs, Guido; Albertz, Markus; Gerya, Taras V.; Kaus, Boris; Landry, Walter; le Pourhiet, Laetitia; Mishin, Yury; Egholm, David L.; Cooke, Michele; Maillot, Bertrand; Thieulot, Cedric; Crook, Tony; May, Dave; Souloumiac, Pauline; Beaumont, Christopher

    2016-11-01

    We report quantitative results from three brittle thrust wedge experiments, comparing numerical results directly with each other and with corresponding analogue results. We first test whether the participating codes reproduce predictions from analytical critical taper theory. Eleven codes pass the stable wedge test, showing negligible internal deformation and maintaining the initial surface slope upon horizontal translation over a frictional interface. Eight codes participated in the unstable wedge test that examines the evolution of a wedge by thrust formation from a subcritical state to the critical taper geometry. The critical taper is recovered, but the models show two deformation modes characterised by either mainly forward dipping thrusts or a series of thrust pop-ups. We speculate that the two modes are caused by differences in effective basal boundary friction related to different algorithms for modelling boundary friction. The third experiment examines stacking of forward thrusts that are translated upward along a backward thrust. The results of the seven codes that run this experiment show variability in deformation style, number of thrusts, thrust dip angles and surface slope. Overall, our experiments show that numerical models run with different numerical techniques can successfully simulate laboratory brittle thrust wedge models at the cm-scale. In more detail, however, we find that it is challenging to reproduce sandbox-type setups numerically, because of frictional boundary conditions and velocity discontinuities. We recommend that future numerical-analogue comparisons use simple boundary conditions and that the numerical Earth Science community defines a plasticity test to resolve the variability in model shear zones.

  18. Benchmarking analogue models of brittle thrust wedges

    Science.gov (United States)

    Schreurs, Guido; Buiter, Susanne J. H.; Boutelier, Jennifer; Burberry, Caroline; Callot, Jean-Paul; Cavozzi, Cristian; Cerca, Mariano; Chen, Jian-Hong; Cristallini, Ernesto; Cruden, Alexander R.; Cruz, Leonardo; Daniel, Jean-Marc; Da Poian, Gabriela; Garcia, Victor H.; Gomes, Caroline J. S.; Grall, Céline; Guillot, Yannick; Guzmán, Cecilia; Hidayah, Triyani Nur; Hilley, George; Klinkmüller, Matthias; Koyi, Hemin A.; Lu, Chia-Yu; Maillot, Bertrand; Meriaux, Catherine; Nilfouroushan, Faramarz; Pan, Chang-Chih; Pillot, Daniel; Portillo, Rodrigo; Rosenau, Matthias; Schellart, Wouter P.; Schlische, Roy W.; Take, Andy; Vendeville, Bruno; Vergnaud, Marine; Vettori, Matteo; Wang, Shih-Hsien; Withjack, Martha O.; Yagupsky, Daniel; Yamada, Yasuhiro

    2016-11-01

    We performed a quantitative comparison of brittle thrust wedge experiments to evaluate the variability among analogue models and to appraise the reproducibility and limits of model interpretation. Fifteen analogue modeling laboratories participated in this benchmark initiative. Each laboratory received a shipment of the same type of quartz and corundum sand and all laboratories adhered to a stringent model building protocol and used the same type of foil to cover base and sidewalls of the sandbox. Sieve structure, sifting height, filling rate, and details on off-scraping of excess sand followed prescribed procedures. Our analogue benchmark shows that even for simple plane-strain experiments with prescribed stringent model construction techniques, quantitative model results show variability, most notably for surface slope, thrust spacing and number of forward and backthrusts. One of the sources of the variability in model results is related to slight variations in how sand is deposited in the sandbox. Small changes in sifting height, sifting rate, and scraping will result in slightly heterogeneous material bulk densities, which will affect the mechanical properties of the sand, and will result in lateral and vertical differences in peak and boundary friction angles, as well as cohesion values once the model is constructed. Initial variations in basal friction are inferred to play the most important role in causing model variability. Our comparison shows that the human factor plays a decisive role, and even when one modeler repeats the same experiment, quantitative model results still show variability. Our observations highlight the limits of up-scaling quantitative analogue model results to nature or for making comparisons with numerical models. The frictional behavior of sand is highly sensitive to small variations in material state or experimental set-up, and hence, it will remain difficult to scale quantitative results such as number of thrusts, thrust spacing

  19. High Throughput PBTK: Open-Source Data and Tools for ...

    Science.gov (United States)

    Presentation on High Throughput PBTK at the PBK Modelling in Risk Assessment meeting in Ispra, Italy Presentation on High Throughput PBTK at the PBK Modelling in Risk Assessment meeting in Ispra, Italy

  20. Process Based Explanations for Correlations Between the Structural and Seismic Segmentation of the Cascadia Subduction Wedge

    Science.gov (United States)

    Fuller, C. W.; Brandon, M. T.; Willett, S. D.

    2006-12-01

    Variations in the geological and geophysical characteristics of the Cascadia subduction wedge, the region between the trench and arc, result in along-strike wedge segmentation. We focus on explaining the large-scale structural segmentation and how processes causing this segmentation influence segmentation with respect to the seismic behavior of the wedge and subduction thrust. The relationships we develop illustrate the fundamental interplay of processes controlling long-term structure and short-term seismic behavior. Our conclusions are based on the results of numerical models designed to simulate the growth and evolution of the Cascadia subduction wedge through the accretion of a thin layer of sediment to the basaltic Coast Range Terrane (CRT) of the Cascadia margin. Two aspects of wedge structural segmentation are of interest: (1) segmentation with respect to the location or absence of large, continental shelf, forearc basins, and (2) segmentation with respect to the Coastal Range (CR) structural high. Our models illustrate that the form of the submarine portion of the Cascadia wedge, including the basins or lack thereof, is a consequence of the frictional behavior of this region of wedge, subduction thrust strength, wedge strength, and dip thrust. We propose that basin segments have stronger wedge material, a weaker thrust, or a steeper thrust than basin free segments. The presence of basins is significant because they stabilize the margin and prevent subduction and accretion related deformation. This stabilization allows the thrust to preferentially support thermally induced, fluid overpressures and undergo fault healing thus increasing the likelihood of large coseismic slip within basin segments. While no historical earthquake data supporting this argument exists for Cascadia, such behavior has been observed in many margins (Song and Simons, 2003; Wells et al., 2003). It is reasonable to assume that large earthquakes in Cascadia will have the same association

  1. Crustal and Fault Strengths from Critical Taper Measurements: Insights into the behavior of Accretionary Wedges using Distinct-Element Models

    Science.gov (United States)

    Strayer, L.; Suppe, J.

    2012-12-01

    It is increasingly clear that many major faults are weak relative to quasistatic friction because of dynamical effects involving the microprocesses of high-velocity friction and the energetics of large-scale fault rupture. Even at the toes of accretionary wedges where velocity strengthening is expected, large displacements can occur dynamically. We seek to better understand the relationship between the large-scale strength of such faults and of the crust containing them over a timescale much greater than seismic cycles. Critical-taper theory provides straightforward quantitative relationships between accretionary wedge geometry and absolute basal fault and wedge strengths with minimal assumptions. Wedge tapers constrain the far-field stresses under which detachments slip and wedges grow during wedge-growing events, whether they are dynamical or quasistatic. To date most applications of wedge mechanics to accretionary wedges involve analog and numerical modeling with largely conceptual insight, for example illuminating the role of geological heterogeneity. Here we demonstrate that recent theoretical advances that are successful in extracting absolute wedge and detachment strengths from the geometry of active wedges can also be applied to extract large-scale strengths in distinct element numerical models in both mechanically homogeneous and heterogeneous wedges. The distinct element method (DEM) is an ideal tool for the study and modeling of critical taper wedges: model wedges can be initially cohesive (bonded) or cohesionless. Faults and folds form naturally as the result of progressive bond breakage during shortening and wedge growth. Heterogeneity can be introduced by creating layered groups of particles of differing mechanical properties. The DEM suffers to some extent in that macro material properties cannot be directly prescribed but rather must be defined by a modest number of micro-properties and the process in necessarily iterative and developing a wide

  2. Jane Austen in the High School Classroom (Open to Suggestion).

    Science.gov (United States)

    Fritzer, Penelope

    1996-01-01

    Argues that Jane Austen's novels lend themselves to the high school curriculum, and that students will discover a leisurely, rural world in which the concerns of the young people are often similar to theirs. (SR)

  3. Jane Austen in the High School Classroom (Open to Suggestion).

    Science.gov (United States)

    Fritzer, Penelope

    1996-01-01

    Argues that Jane Austen's novels lend themselves to the high school curriculum, and that students will discover a leisurely, rural world in which the concerns of the young people are often similar to theirs. (SR)

  4. Radiation pressure on a dielectric wedge

    CERN Document Server

    Mansuripur, Masud; Moloney, Jerome V

    2014-01-01

    The force of electromagnetic radiation on a dielectric medium may be derived by a direct application of the Lorentz law of classical electrodynamics. While the light's electric field acts upon the (induced) bound charges in the medium, its magnetic field exerts a force on the bound currents. We use the example of a wedge-shaped solid dielectric, immersed in a transparent liquid and illuminated at Brewster's angle, to demonstrate that the linear momentum of the electromagnetic field within dielectrics has neither the Minkowski nor the Abraham form; rather, the correct expression for momentum density has equal contributions from both. The time rate of change of the incident momentum thus expressed is equal to the force exerted on the wedge plus that experienced by the surrounding liquid.

  5. Graphene Plasmons in Triangular Wedges and Grooves

    CERN Document Server

    Gonçalves, P A D; Xiao, Sanshui; Vasilevskiy, M I; Mortensen, N Asger; Peres, N M R

    2016-01-01

    The ability to effectively guide electromagnetic radiation below the diffraction limit is of the utmost importance in the prospect of all-optical plasmonic circuitry. Here, we propose an alternative solution to conventional metal-based plasmonics by exploiting the deep subwavelength confinement and tunability of graphene plasmons guided along the apex of a graphene-covered dielectric wedge or groove. In particular, we present a quasi-analytic model to describe the plasmonic eigenmodes in such a system, including the complete determination of their spectrum and corresponding induced potential and electric field distributions. We have found that the dispersion of wedge/groove graphene plasmons follows the same functional dependence as their flat-graphene plasmons counterparts, but now scaled by a (purely) geometric factor in which all the information about the system's geometry is contained. We believe our results pave the way for the development of novel custom-tailored photonic devices for subwavelength waveg...

  6. Checking the virtual treatment modality Wedge from Siemens; Verificacion de la modalidad de tratamiento virtual WEDGE de SIEMENS

    Energy Technology Data Exchange (ETDEWEB)

    Suero Rodrigo, M. A.; Marques Fraguela, E.

    2011-07-01

    The treatment modality Virtual Wedge (VW) or implemented by Siemens virtual wedge in electron linear accelerators achieved dose distributions are similar but not identical, to those obtained with physical wedges. Among the advantages against the latter is the greater ease of use, wedge factor close to one, and lower peripheral dose. However, these benefits are to be effective requires a through quality control dependence because a larger number of parameters that control the generation of the beam, the dose monitor system and the movement of the jaws of the collimator. We performed a study of the wedge taking into account different configurations that can affect their behavior from the dosimetric point of view.

  7. Flow structure around high-speed train in open air

    Institute of Scientific and Technical Information of China (English)

    田红旗; 黄莎; 杨明智

    2015-01-01

    According to the analysis of the turbulent intensity level around the high-speed train, the maximum turbulent intensity ranges from 0.2 to 0.5 which belongs to high turbulent flow. The flow field distribution law was studied and eight types of flow regions were proposed. They are high pressure with air stagnant region, pressure decreasing with air accelerating region, low pressure with high air flow velocity region I, turbulent region, steady flow region, low pressure with high air flow velocity region II, pressure increasing with air decelerating region and wake region. The analysis of the vortex structure around the train shows that the vortex is mainly induced by structures with complex mutation and large curvature change. The head and rear of train, the underbody structure, the carriage connection section and the wake region are the main vortex generating sources while the train body with even cross-section has rare vortexes. The wake structure development law studied lays foundation for the train drag reduction.

  8. Improving OpenMP Productivity with Data Locality Optimizations and High-resolution Performance Analysis

    OpenAIRE

    Muddukrishna, Ananya

    2016-01-01

    The combination of high-performance parallel programming and multi-core processors is the dominant approach to meet the ever increasing demand for computing performance today. The thesis is centered around OpenMP, a popular parallel programming API standard that enables programmers to quickly get started with writing parallel programs. However, in contrast to the quickness of getting started, writing high-performance OpenMP programs requires high effort and saps productivity. Part of the reas...

  9. Water Impact of Rigid Wedges in Two-Dimensional Fluid Flow

    Directory of Open Access Journals (Sweden)

    Sawan Shah

    2015-01-01

    Full Text Available A combined experimental and numerical investigation was conducted into impact of rigid wedges on water in two-dimensional fluid conditions. Drop test experiments were conducted involving symmetric rigid wedges of varying angle and mass impacted onto water. The kinematic behaviour of the wedge and water was characterised using high-speed video. Numerical models were analysed in LS-DYNA® that combined regions of Smoothed Particle Hydrodynamics particles and a Lagrangian element mesh. The analysis captured the majority of experimental results and trends, within the bounds of experimental variance. Further, the combined modelling technique presented a highly attractive combination of computational efficiency and accuracy, making it a suitable candidate for aircraft ditching investigations.

  10. Seismic evidence for a cold serpentinized mantle wedge beneath Mount St Helens.

    Science.gov (United States)

    Hansen, S M; Schmandt, B; Levander, A; Kiser, E; Vidale, J E; Abers, G A; Creager, K C

    2016-11-01

    Mount St Helens is the most active volcano within the Cascade arc; however, its location is unusual because it lies 50 km west of the main axis of arc volcanism. Subduction zone thermal models indicate that the down-going slab is decoupled from the overriding mantle wedge beneath the forearc, resulting in a cold mantle wedge that is unlikely to generate melt. Consequently, the forearc location of Mount St Helens raises questions regarding the extent of the cold mantle wedge and the source region of melts that are responsible for volcanism. Here using, high-resolution active-source seismic data, we show that Mount St Helens sits atop a sharp lateral boundary in Moho reflectivity. Weak-to-absent PmP reflections to the west are attributed to serpentinite in the mantle-wedge, which requires a cold hydrated mantle wedge beneath Mount St Helens (<∼700 °C). These results suggest that the melt source region lies east towards Mount Adams.

  11. Dying Flow Bursts as Generators of the Substorm Current Wedge

    Science.gov (United States)

    Haerendel, Gerhard

    2016-07-01

    Many theories or conjectures exist on the driver of the substorm current wedge, e.g. rerouting of the tail current, current disruption, flow braking, vortex formation, and current sheet collapse. Magnitude, spatial scale, and temporal development of the related magnetic perturbations suggest that the generator is related to the interaction of the flow bursts with the dipolar magnetosphere after onset of reconnection in the near-Earth tail. The question remains whether it is the flow energy that feeds the wedge current or the internal energy of the arriving plasma. In this presentation I argue for the latter. The current generation is attributed to the force exerted by the dipolarized magnetic field of the flow bursts on the preceding layer of high-beta plasma after flow braking. The generator current is the grad-B current at the outer boundary of the compressed high-beta plasma layers. It needs the sequential arrival of several flow bursts to account for duration and magnitude of the ionospheric closure current.

  12. Mantle flow in subduction systems: The mantle wedge flow field and implications for wedge processes

    Science.gov (United States)

    Long, Maureen D.; Wirth, Erin A.

    2013-02-01

    The mantle wedge above subducting slabs is associated with many important processes, including the transport of melt and volatiles. Our understanding of mantle wedge dynamics is incomplete, as the mantle flow field above subducting slabs remains poorly understood. Because seismic anisotropy is a consequence of deformation, measurements of shear wave splitting can constrain the geometry of mantle flow. In order to identify processes that make first-order contributions to the pattern of wedge flow, we have compiled a data set of local S splitting measurements from mantle wedges worldwide. There is a large amount of variability in splitting parameters, with average delay times ranging from ~0.1 to 0.3 s up to ~1.0-1.5 s and large variations in fast directions. We tested for relationships between splitting parameters and a variety of parameters related to subduction processes. We also explicitly tested the predictions made by 10 different models that have been proposed to explain splitting patterns in the mantle wedge. We find that no simple model can explain all of the trends observed in the global data set. Mantle wedge flow is likely controlled by a combination of downdip motion of the slab, trench migration, ambient mantle flow, small-scale convection, proximity to slab edges, and slab morphology, with the relative contributions of these in any given subduction system controlled by the subduction kinematics and mantle rheology. There is also a likely contribution from B-type olivine and/or serpentinite fabric in many subduction zones, governed by the local thermal structure and volatile distribution.

  13. Highly Ordered Carbon Nanotube Arrays with Open Ends Grown in Anodic Alumina Nanoholes

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    Highly ordered multiwalled carbon nanotube arrays were fabricated by pyrolysis of acetylene within anodic alumina templates.Nanotubes are very uniform in diameter and open at both ends. High resolution transmission electron microscopy and electron diffraction analysis show that the carbon nanotubes are well graphitized. These standing and open carbon nanotubes are possible to offer a potential elegant technique for electron emitting devices,chemical functionalization and nanotube composites.

  14. Laparoscopic wedge resection of synchronous gastric intraepithelial neoplasia and stromal tumor: a case report.

    Science.gov (United States)

    Mou, Yi-Ping; Xu, Xiao-Wu; Xie, Kun; Zhou, Wei; Zhou, Yu-Cheng; Chen, Ke

    2010-10-21

    Synchronous occurrence of epithelial neoplasia and gastrointestinal stromal tumor (GIST) in the stomach is uncommon. Only rare cases have been reported in the literature. We present here a 60-year-old female case of synchronous occurrence of gastric high-level intraepithelial neoplasia and GIST with the features of 22 similar cases and detailed information reported in the English-language literature summarized. In the present patient, epithelial neoplasia and GIST were removed en bloc by laparoscopic wedge resection. To the best of our knowledge, this is the first reported case treated by laparoscopic wedge resection.

  15. An automated optical wedge calibrator for Dobson ozone spectrophotometers

    Science.gov (United States)

    Evans, R. D.; Komhyr, W. D.; Grass, R. D.

    1994-01-01

    The Dobson ozone spectrophotometer measures the difference of intensity between selected wavelengths in the ultraviolet. The method uses an optical attenuator (the 'Wedge') in this measurement. The knowledge of the relationship of the wedge position to the attenuation is critical to the correct calculation of ozone from the measurement. The procedure to determine this relationship is time-consuming, and requires a highly skilled person to perform it correctly. The relationship has been found to change with time. For reliable ozone values, the procedure should be done on a Dobson instrument at regular intervals. Due to the skill and time necessary to perform this procedure, many instruments have gone as long as 15 years between procedures. This article describes an apparatus that performs the procedure under computer control, and is adaptable to the majority of existing Dobson instruments. Part of the apparatus is usable for normal operation of the Dobson instrument, and would allow computer collection of the data and real-time ozone measurements.

  16. Open Access Publishing in High-Energy Physics: the SCOAP(3) Initiative

    CERN Document Server

    Mele, Salvatore

    2010-01-01

    Scholarly communication in High-Energy Physics (HEP) shows traits very similar to Astronomy and Astrophysics: pervasiveness of Open Access to preprints through community-based services; a culture of openness and sharing among its researchers; a compact number of yearly articles published by a relatively small number of journals which are dear to the community. These aspects have led HEP to spearhead an innovative model for the transition of its scholarly publishing to Open Access. The Sponsoring Consortium for Open Access Publishing in Particle Physics (SCOAP(3)) aims to be a central body to finance peer-review service rather than the purchase of access to information as in the traditional subscription model, with all articles in the discipline eventually available in Open Access. Sustainable funding to SCOAP(3) would come from libraries, library consortia and HEP funding agencies, through a re-direction of funds currently spent for subscriptions to HEP journals. This paper presents the cultural and bibliomet...

  17. News from the Library: Publishing Open Access articles beyond High Energy Physics

    CERN Multimedia

    CERN Library

    2012-01-01

    CERN has supported Open Access Publishing for many years, and the Scientific Information Service is working to implement this vision. We have just launched the flagship project SCOAP3 (Sponsoring Consortium for Open Access Publishing in Particle Physics) aimed at converting high-quality journals in High Energy Physics to Open Access for articles published as of 2014. More details here.   In parallel, several win-win arrangements allow experimental and theoretical high-energy physics results from CERN to be published in Open Access in a variety of high-impact journals. More information can be found here. Open Access publishing at CERN goes far beyond High Energy Physics. Indeed, CERN is a key supporter of Open Access in accelerator science, through sponsorship of the APS journal PRSTAB and participation in the JACoW collaboration. Now CERN authors publishing in the field of engineering will also have th...

  18. Knee abduction angular impulses during prolonged running with wedged insoles.

    Science.gov (United States)

    Lewinson, Ryan T; Worobets, Jay T; Stefanyshyn, Darren J

    2013-07-01

    Wedged insoles may produce immediate effects on knee abduction angular impulses during running; however, it is currently not known whether these knee abduction angular impulse magnitudes are maintained throughout a run when fatigue sets in. If changes occur, this could affect the clinical utility of wedged insoles in treating conditions such as patellofemoral pain. Thus, the purpose of this study was to determine whether knee abduction angular impulses are altered during a prolonged run with wedged insoles. It was hypothesized that knee abduction angular impulses would be reduced following a prolonged run with wedged insoles. Nine healthy runners participated. Runners were randomly assigned to either a 6-mm medial wedge condition or a 6-mm lateral wedge condition and then ran continuously overground for 30 min. Knee abduction angular impulses were quantified at 0 and 30 min using a gait analysis procedure. After 2 days, participants returned to perform the same test but with the other wedge type. Two-way repeated-measures analysis of variance was used to evaluate main effects of wedge condition and time and interactions between wedge condition and time (α = 0.05). Paired t-tests were used for post hoc analysis (α = 0.01). No interaction effects (p = 0.958) were found, and knee abduction angular impulses were not significantly different over time (p = 0.384). Lateral wedge conditions produced lesser knee abduction angular impulses than medial conditions at 0 min (difference of 2.79 N m s, p = 0.006) and at 30 min (difference of 2.76 N m s, p < 0.001). It is concluded that significant knee abduction angular impulse changes within wedge conditions do not occur during a 30-min run. Additionally, knee abduction angular impulse differences between wedge conditions are maintained during a 30-min run.

  19. Plastic deformation of a wedge by a sliding punch

    Science.gov (United States)

    Nepershin, R. I.

    2016-11-01

    We present a self-similar solution of the problem of deformation of an ideally plastic wedge by a sliding punch with regard to contact friction; such a solution generalizes the well-known solutions of the problem of wedge penetration into a plastic half-space and of compression of an ideally plastic wedge by a plane punch. The problem is of interest for modeling the processes of plastic deformation of rough surfaces of metal pieces by a rigid tool.

  20. Vibration frequencies of a constrained cantilever wedge

    Science.gov (United States)

    Craver, W. Lionel, Jr.; Lu, Yangshan

    1989-05-01

    This paper presents the solution for the natural frequencies of a beam tapered in one direction, or a wedge, with both a rotational and a translational constraint at a position along the length of the beam. The eigenfrequencies were determined using an incremental search and bisection method, accurate to the fourth decimal place. The taper ratio was varied from 1.4 to 5.0 and the dimensionless spring constants were varied from 0 to 1000. Graphs are provided to illustrate some results.

  1. Impingement of water droplets on wedges and double-wedge airfoils at supersonic speeds

    Science.gov (United States)

    Serafini, John S

    1954-01-01

    An analytical solution has been obtained for the equations of motion of water droplets impinging on a wedge in a two-dimensional supersonic flow field with a shock wave attached to the wedge. The closed-form solution yields analytical expressions for the equation of the droplet trajectory, the local rate of impingement and the impingement velocity at any point on the wedge surface, and the total rate of impingement. The analytical expressions are utilized to determine the impingement on the forward surfaces of diamond airfoils in supersonic flow fields with attached shock waves. The results presented include the following conditions: droplet diameters from 2 to 100 microns, pressure altitudes from sea level to 30,000 feet, free-stream static temperatures from 420 degrees r, free stream Mach numbers from 1.1 to 2.0, semiapex angles for the wedge from 1.14 degrees to 7.97 degrees, thickness-to-chord ratios for the diamond airfoil from 0.02 to 0.14, chord lengths from 1 to 20 feet, and angles of attack from zero to the inverse tangent of the airfoil thickness-to-chord ratio.

  2. High School Teachers' Openness to Adopting New Practices: The Role of Personal Resources and Organizational Climate.

    Science.gov (United States)

    Johnson, Stacy R; Pas, Elise T; Loh, Deanna; Debnam, Katrina J; Bradshaw, Catherine P

    2017-03-01

    Although evidence-based practices for students' social, emotional, and behavioral health are readily available, their adoption and quality implementation in schools are of increasing concern. Teachers are vital to implementation; yet, there is limited research on teachers' openness to adopting new practices, which may be essential to successful program adoption and implementation. The current study explored how perceptions of principal support, teacher affiliation, teacher efficacy, and burnout relate to teachers' openness to new practices. Data came from 2,133 teachers across 51 high schools. Structural equation modeling assessed how organizational climate (i.e., principal support and teacher affiliation) related to teachers' openness directly and indirectly via teacher resources (i.e., efficacy and burnout). Teachers with more favorable perceptions of both principal support and teacher affiliation reported greater efficacy, and, in turn, more openness; however, burnout was not significantly associated with openness. Post hoc analyses indicated that among teachers with high levels of burnout, only principal support related to greater efficacy, and in turn, higher openness. Implications for promoting teachers' openness to new program adoption are discussed.

  3. Open high-level data formats and software for gamma-ray astronomy

    CERN Document Server

    Deil, Christoph; Kosack, Karl; Perkins, Jeremy; King, Johannes; Eger, Peter; Mayer, Michael; Wood, Matthew; Zabalza, Victor; Knödlseder, Jürgen; Hassan, Tarek; Mohrmann, Lars; Ziegler, Alexander; Khelifi, Bruno; Dorner, Daniela; Maier, Gernot; Pedaletti, Giovanna; Rosado, Jaime; Contreras, José Luis; Lefaucheur, Julien; Brügge, Kai; Servillat, Mathieu; Terrier, Régis; Walter, Roland; Lombardi, Saverio

    2016-01-01

    In gamma-ray astronomy, a variety of data formats and proprietary software have been traditionally used, often developed for one specific mission or experiment. Especially for ground-based imaging atmospheric Cherenkov telescopes (IACTs), data and software are mostly private to the collaborations operating the telescopes. However, there is a general movement in science towards the use of open data and software. In addition, the next-generation IACT instrument, the Cherenkov Telescope Array (CTA), will be operated as an open observatory. We have created a Github organisation at https://github.com/open-gamma-ray-astro where we are developing high-level data format specifications. A public mailing list was set up at https://lists.nasa.gov/mailman/listinfo/open-gamma-ray-astro and a first face-to-face meeting on the IACT high-level data model and formats took place in April 2016 in Meudon (France). This open multi-mission effort will help to accelerate the development of open data formats and open-source software...

  4. Integrated Analysis Platform: An Open-Source Information System for High-Throughput Plant Phenotyping1[C][W][OPEN

    Science.gov (United States)

    Klukas, Christian; Chen, Dijun; Pape, Jean-Michel

    2014-01-01

    High-throughput phenotyping is emerging as an important technology to dissect phenotypic components in plants. Efficient image processing and feature extraction are prerequisites to quantify plant growth and performance based on phenotypic traits. Issues include data management, image analysis, and result visualization of large-scale phenotypic data sets. Here, we present Integrated Analysis Platform (IAP), an open-source framework for high-throughput plant phenotyping. IAP provides user-friendly interfaces, and its core functions are highly adaptable. Our system supports image data transfer from different acquisition environments and large-scale image analysis for different plant species based on real-time imaging data obtained from different spectra. Due to the huge amount of data to manage, we utilized a common data structure for efficient storage and organization of data for both input data and result data. We implemented a block-based method for automated image processing to extract a representative list of plant phenotypic traits. We also provide tools for build-in data plotting and result export. For validation of IAP, we performed an example experiment that contains 33 maize (Zea mays ‘Fernandez’) plants, which were grown for 9 weeks in an automated greenhouse with nondestructive imaging. Subsequently, the image data were subjected to automated analysis with the maize pipeline implemented in our system. We found that the computed digital volume and number of leaves correlate with our manually measured data in high accuracy up to 0.98 and 0.95, respectively. In summary, IAP provides a multiple set of functionalities for import/export, management, and automated analysis of high-throughput plant phenotyping data, and its analysis results are highly reliable. PMID:24760818

  5. P-wave anisotropy, mantle wedge flow and olivine fabrics beneath Japan

    Science.gov (United States)

    Liu, Xin; Zhao, Dapeng

    2017-09-01

    We present a new 3-D anisotropic P-wave velocity (Vp) model for the crust and upper mantle of the Japan subduction zone obtained by inverting a large number of high-quality P-wave traveltime data of local earthquakes and teleseismic events. By assuming orthorhombic anisotropy with a vertical symmetry axis existing in the modeling space, isotropic Vp tomography and 3-D Vp azimuthal and radial anisotropies are determined simultaneously. According to a simple flow field and the obtained Vp anisotropic tomography, we estimate the distribution of olivine fabrics in the mantle wedge. Our results show that the forearc mantle wedge above the subducting Pacific slab beneath NE Japan exhibits an azimuthal anisotropy with trench-parallel fast velocity directions (FVDs) and Vhf > Vv > Vhs (here Vv is Vp in the vertical direction, Vhf and Vhs are P-wave velocities in the fast and slow directions in the horizontal plane), where B-type olivine fabric with vertical trench-parallel flow may dominate. Such an anisotropic feature is not obvious in the forearc mantle wedge above the Philippine Sea (PHS) slab under SW Japan, probably due to higher temperatures and more fluids there associated with the young and warm PHS slab subduction. Trench-normal FVDs and Vhf > Vv > Vhs are generally revealed in the mantle wedge beneath the arc and backarc in Japan, where E-type olivine fabric with FVD-parallel horizontal flow may dominate. Beneath western Honshu, however, the mantle wedge exhibits an anisotropy of Vv > Vhf > Vhs and so C-type olivine fabric may dominate, suggesting that the water content is the highest there, because both the PHS and Pacific slabs exist there and their dehydration reactions release abundant fluids to the overlying mantle wedge.

  6. High-Performance Message Passing over generic Ethernet Hardware with Open-MX

    OpenAIRE

    Goglin, Brice

    2011-01-01

    International audience; In the last decade, cluster computing has become the most popular high-performance computing architecture. Although numerous technological innovations have been proposed to improve the interconnection of nodes, many clusters still rely on commodity Ethernet hardware to implement message passing within parallel applications. We present Open-MX, an open-source message passing stack over generic Ethernet. It offers the same abilities as the specialized Myrinet Express sta...

  7. Global Existence of a Shock for the Supersonic Flow Past a Curved Wedge

    Institute of Scientific and Technical Information of China (English)

    Hui Cheng YIN

    2006-01-01

    This note is devoted to the study of the global existence of a shock wave for the supersonic flow past a curved wedge. When the curved wedge is a small perturbation of a straight wedge and the angle of the wedge is less than some critical value, we show that a shock attached at the wedge will exist globally.

  8. Molecular depth profiling by wedged crater beveling.

    Science.gov (United States)

    Mao, Dan; Lu, Caiyan; Winograd, Nicholas; Wucher, Andreas

    2011-08-15

    Time-of-flight secondary ion mass spectrometry and atomic force microscopy are employed to characterize a wedge-shaped crater eroded by a 40-keV C(60)(+) cluster ion beam on an organic film of Irganox 1010 doped with Irganox 3114 delta layers. From an examination of the resulting surface, the information about depth resolution, topography, and erosion rate can be obtained as a function of crater depth for every depth in a single experiment. It is shown that when measurements are performed at liquid nitrogen temperature, a constant erosion rate and reduced bombardment induced surface roughness is observed. At room temperature, however, the erosion rate drops by ∼(1)/(3) during the removal of the 400 nm Irganox film and the roughness gradually increased to from 1 nm to ∼4 nm. From SIMS lateral images of the beveled crater and AFM topography results, depth resolution was further improved by employing glancing angles of incidence and lower primary ion beam energy. Sub-10 nm depth resolution was observed under the optimized conditions on a routine basis. In general, we show that the wedge-crater beveling is an important tool for elucidating the factors that are important for molecular depth profiling experiments.

  9. Ice-Creams and Wedge Graphs

    CERN Document Server

    Ackerman, Eyal; Pinchasi, Rom

    2011-01-01

    We show that for every compact convex set $S$ in the plane and every $0 < \\alpha < \\pi$, there exist a point $O$ and two supporting lines to $S$ passing through $O$ and touching $S$ at two \\emph{single points} $X$ and $Y$, respectively, such that $|OX|=|OY|$ and the angle between the two lines has measure $\\alpha$. As a consequence, we provide a simplified proof to the following result by Carmi, Katz, Lotker, and Ros\\'en \\cite{CKLR10}. Given a set of $\\frac{\\pi}{3}$-directional antennas (that is, antennas each of which can communicate along a wedge of angle $\\frac{\\pi}{3}$), one can always assign a direction to each antenna such that the resulting communication graph is connected, where two antennas can communicate if and only if each lies in the wedge assigned to the other. In fact we obtain a much stronger and optimal result (see Theorem \\ref{theorem:main}) saying in particular that one can chose the directions of the antennas so that the communication graph has diameter $\\le 4$.

  10. Which Type of Inquiry Project Do High School Biology Students Prefer: Open or Guided?

    Science.gov (United States)

    Sadeh, Irit; Zion, Michal

    2012-10-01

    In teaching inquiry to high school students, educators differ on which method of teaching inquiry is more effective: Guided or open inquiry? This paper examines the influence of these two different inquiry learning approaches on the attitudes of Israeli high school biology students toward their inquiry project. The results showed significant differences between the two groups: Open inquiry students were more satisfied and felt they gained benefits from implementing the project to a greater extent than guided inquiry students. On the other hand, regarding documentation throughout the project, guided inquiry students believed that they conducted more documentation, as compared to their open inquiry peers. No significant differences were found regarding `the investment of time', but significant differences were found in the time invested and difficulties which arose concerning the different stages of the inquiry process: Open inquiry students believed they spent more time in the first stages of the project, while guided inquiry students believed they spent more time in writing the final paper. In addition, other differences were found: Open inquiry students felt more involved in their project, and felt a greater sense of cooperation with others, in comparison to guided inquiry students. These findings may help teachers who hesitate to teach open inquiry to implement this method of inquiry; or at least provide their students with the opportunity to be more involved in inquiry projects, and ultimately provide their students with more autonomy, high-order thinking, and a deeper understanding in performing science.

  11. Zonal character of failure near the wells and openings in high depth conditions

    Institute of Scientific and Technical Information of China (English)

    V.V. Makarov; L.S. Ksendzenko; V.M. Sapelkina; A.A. Opanasyuk; N.A. Opanasyuk; E.N. Jashkova

    2006-01-01

    Rock mass failure on the high depth near the underground openings often has zonal character. The mechanism of this phenomenon consists in the periodical character of stresses in surrounding rock mass and developing of tensile macrocracks at the places (zones) of maximum tangentional stresses. Mathematical model of the high stressed rock mass is developed on the base of the defect media mechanics and nonequilibrium thermodynamics principals. The correspondence between the experimental research of faulted zonal structures near the high depths openings and mathematical model calculation is achieved. Relationships between the width of cracking zones and rock mass strength property have been determined.

  12. A High-Leverage Language Teaching Practice: Leading an Open-Ended Group Discussion

    Science.gov (United States)

    Kearney, Erin

    2015-01-01

    In response to calls for more practice-based teacher education, this study investigated the way in which two high-performing novice world language teachers, one in Spanish and one in Latin, implemented a high-leverage teaching practice, leading an open-ended group discussion. Observational data revealed a number of constituent micro-practices. The…

  13. A High-Leverage Language Teaching Practice: Leading an Open-Ended Group Discussion

    Science.gov (United States)

    Kearney, Erin

    2015-01-01

    In response to calls for more practice-based teacher education, this study investigated the way in which two high-performing novice world language teachers, one in Spanish and one in Latin, implemented a high-leverage teaching practice, leading an open-ended group discussion. Observational data revealed a number of constituent micro-practices. The…

  14. Surgeons’ Volume-Outcome Relationship for Lobectomies and Wedge Resections for Cancer Using Video-Assisted Thoracoscopic Techniques

    Directory of Open Access Journals (Sweden)

    Guy David

    2012-01-01

    Full Text Available This study examined the effect of surgeons’ volume on outcomes in lung surgery: lobectomies and wedge resections. Additionally, the effect of video-assisted thoracoscopic surgery (VATS on cost, utilization, and adverse events was analyzed. The Premier Hospital Database was the data source for this analysis. Eligible patients were those of any age undergoing lobectomy or wedge resection using VATS for cancer treatment. Volume was represented by the aggregate experience level of the surgeon in a six-month window before each surgery. A positive volume-outcome relationship was found with some notable features. The relationship is stronger for cost and utilization outcomes than for adverse events; for thoracic surgeons as opposed to other surgeons; for VATS lobectomies rather than VATS wedge resections. While there was a reduction in cost and resource utilization with greater experience in VATS, these outcomes were not associated with greater experience in open procedures.

  15. OpenMM 4: A Reusable, Extensible, Hardware Independent Library for High Performance Molecular Simulation.

    Science.gov (United States)

    Eastman, Peter; Friedrichs, Mark S; Chodera, John D; Radmer, Randall J; Bruns, Christopher M; Ku, Joy P; Beauchamp, Kyle A; Lane, Thomas J; Wang, Lee-Ping; Shukla, Diwakar; Tye, Tony; Houston, Mike; Stich, Timo; Klein, Christoph; Shirts, Michael R; Pande, Vijay S

    2013-01-08

    OpenMM is a software toolkit for performing molecular simulations on a range of high performance computing architectures. It is based on a layered architecture: the lower layers function as a reusable library that can be invoked by any application, while the upper layers form a complete environment for running molecular simulations. The library API hides all hardware-specific dependencies and optimizations from the users and developers of simulation programs: they can be run without modification on any hardware on which the API has been implemented. The current implementations of OpenMM include support for graphics processing units using the OpenCL and CUDA frameworks. In addition, OpenMM was designed to be extensible, so new hardware architectures can be accommodated and new functionality (e.g., energy terms and integrators) can be easily added.

  16. Automatic Open Space Area Extraction and Change Detection from High Resolution Urban Satellite Images

    CERN Document Server

    Kodge, B G

    2011-01-01

    In this paper, we study efficient and reliable automatic extraction algorithm to find out the open space area from the high resolution urban satellite imagery, and to detect changes from the extracted open space area during the period 2003, 2006 and 2008. This automatic extraction and change detection algorithm uses some filters, segmentation and grouping that are applied on satellite images. The resultant images may be used to calculate the total available open space area and the built up area. It may also be used to compare the difference between present and past open space area using historical urban satellite images of that same projection, which is an important geo spatial data management application.

  17. 49 CFR 215.113 - Defective plain bearing wedge.

    Science.gov (United States)

    2010-10-01

    ... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD FREIGHT CAR SAFETY STANDARDS Freight Car Components Suspension System § 215.113 Defective plain bearing wedge. A railroad may not place or continue in service a car, if a plain bearing wedge on that car is— (a) Missing; (b) Cracked; (c) Broken; or (d) Not...

  18. Ground penetrating radar estimates of permafrost ice wedge depth

    Science.gov (United States)

    Parsekian, A.; Slater, L. D.; Nolan, J. T.; Grosse, G.; Walter Anthony, K. M.

    2013-12-01

    Vertical ground ice wedges associated with polygonal patterning in permafrost environments form due to frost cracking of soils under harsh winter conditions and subsequent infilling of cracks with snow melt water. Ice wedge polygon patterns have implications for lowland geomorphology, hydrology, and vulnerability of permafrost to thaw. Ice wedge dimensions may exceed two meters width at the surface and several meters depth, however few studies have addressed the question of ice wedge depth due to challenges related to measuring the vertical dimension below the ground. Vertical exposures where ice wedges maybe observed are limited to rapidly retreating lake, river, and coastal bluffs. Coring though the ice wedges to determine vertical extent is possible, however that approach is time consuming and labor intensive. Many geophysical investigations have noted signal anomalies related to the presence of ice wedges, but no reliable method for extracting wedge dimensions from geophysical data has been yet proposed. Here we present new evidence that ground penetrating radar (GPR) may be a viable method for estimating ice wedge depth. We present three new perspectives on processing GPR data collected over ice wedges that show considerable promise for use as a fast, cost effective method for evaluating ice wedge depth. Our novel approaches include 1) a simple frequency-domain analysis, 2) an S-transform frequency domain analysis and 3) an analysis of the returned signal power as a radar cross section (RCS) treating subsurface ice wedges as dihedral corner retro-reflectors. Our methods are demonstrated and validated using finite-difference time domain FDTD) GPR forward models of synthetic idealized ice wedges and field data from permafrost sites in Alaska. Our results indicate that frequency domain and signal power data provide information that is easier to extract from raw GPR data than similar information in the time domain. We also show that we can simplify the problem by

  19. The effect of lower anterior high pull headgear on treatment of moderate open bite in adults

    Directory of Open Access Journals (Sweden)

    Rahman Showkatbakhsh

    2012-01-01

    Full Text Available Background and Aims: Various methods are used for treatment of open bite. The objective of this study was to investigate the effects of Lower Anterior High Pull Headgear (LAHPH appliance in Class I subjects with moderate open bite and high lower lip line.Materials and Methods: The study group was composed of 10 subjects with a mean age of 15.8±2.5 years and 3.05 ± 0.07 mm moderate open bite. All the patients rejected orthognathic surgery. The treatment included extraction of upper and lower second premolars followed by leveling, banding, bonding, posterior space closure, and anterior retraction. After these procedures, the open bite was reduced to 2.04±1.17 mm. Afterwards, LAHPH was applied for 18 hours per day for 8±2 months. LAHPH appliance was composed of High Pull Headgear and two hooks mounted on its inner bow. Two elastics (1.8, light, Dentaurum connected the upper hooks on the inner bow to the lower hooks on the mandibular canines vertically. The forces produced by the prescribed elastics were 10 and 60 g during mouth closing and opening, respectively. Paired T-test was used to evaluate pre-andpost-treatment outcomes.Results: The pre-and post-treatment cephalometric evaluations showed that the LAHPH reduced effectively the open bite of the patients to 0.15±1.7 mm (P<0.001.Conclusion: This appliance can be used as an acceptable method for closing the open bite in Class I subjects.

  20. Two-dimensional electronic spectroscopy with birefringent wedges

    Energy Technology Data Exchange (ETDEWEB)

    Réhault, Julien; Maiuri, Margherita; Oriana, Aurelio; Cerullo, Giulio [IFN-CNR, Dipartimento di Fisica, Politecnico di Milano, Piazza Leonardo da Vinci 32, 20133 Milano (Italy)

    2014-12-15

    We present a simple experimental setup for performing two-dimensional (2D) electronic spectroscopy in the partially collinear pump-probe geometry. The setup uses a sequence of birefringent wedges to create and delay a pair of phase-locked, collinear pump pulses, with extremely high phase stability and reproducibility. Continuous delay scanning is possible without any active stabilization or position tracking, and allows to record rapidly and easily 2D spectra. The setup works over a broad spectral range from the ultraviolet to the near-IR, it is compatible with few-optical-cycle pulses and can be easily reconfigured to two-colour operation. A simple method for scattering suppression is also introduced. As a proof of principle, we present degenerate and two-color 2D spectra of the light-harvesting complex 1 of purple bacteria.

  1. First 13 Years of HIGH-Tc:. Brief Review and Open Questions

    Science.gov (United States)

    Pavuna, Davor

    Exactly 13 years ago, in April 1986, appeared the famous paper1 by Bednorz and Müller, that announced a striking discovery of high-Tc superconductivity in cuprates. Some 40'000 papers later, we are still struggling to understand the high-Tc superconductivity. Here I summarize some of the most relevant recent results and open questions by discussing the observed phenomena in a rather complex electronic phase diagram of high-Tc oxides.

  2. First 13 years of high-{Tc}: Brief review and open questions

    Energy Technology Data Exchange (ETDEWEB)

    Pavuna, D.

    1999-12-20

    Exactly 13 years ago, in April 1986, appeared the famous paper by Bednorz and Mueller, that announced a striking discovery of high-{Tc} superconductivity in cuprates. Some 40,000 papers later, scientists are still struggling to understand the high-{Tc} superconductivity. Here the author summarizes some of the most relevant recent results and open questions by discussing the observed phenomena in a rather complex electronic phase diagram of high-{Tc} oxides.

  3. Ammonia losses and nitrogen partitioning at a southern High Plains open lot dairy

    Science.gov (United States)

    Todd, Richard W.; Cole, N. Andy; Hagevoort, G. Robert; Casey, Kenneth D.; Auvermann, Brent W.

    2015-06-01

    Animal agriculture is a significant source of ammonia (NH3). Cattle excrete most ingested nitrogen (N); most urinary N is converted to NH3, volatilized and lost to the atmosphere. Open lot dairies on the southern High Plains are a growing industry and face environmental challenges as well as reporting requirements for NH3 emissions. We quantified NH3 emissions from the open lot and wastewater lagoons of a commercial New Mexico dairy during a nine-day summer campaign. The 3500-cow dairy consisted of open lot, manure-surfaced corrals (22.5 ha area). Lactating cows comprised 80% of the herd. A flush system using recycled wastewater intermittently removed manure from feeding alleys to three lagoons (1.8 ha area). Open path lasers measured atmospheric NH3 concentration, sonic anemometers characterized turbulence, and inverse dispersion analysis was used to quantify emissions. Ammonia fluxes (15-min) averaged 56 and 37 μg m-2 s-1 at the open lot and lagoons, respectively. Ammonia emission rate averaged 1061 kg d-1 at the open lot and 59 kg d-1 at the lagoons; 95% of NH3 was emitted from the open lot. The per capita emission rate of NH3 was 304 g cow-1 d-1 from the open lot (41% of N intake) and 17 g cow-1 d-1 from lagoons (2% of N intake). Daily N input at the dairy was 2139 kg d-1, with 43, 36, 19 and 2% of the N partitioned to NH3 emission, manure/lagoons, milk, and cows, respectively.

  4. ON THE ORIGIN OF HIGH-ALTITUDE OPEN CLUSTERS IN THE MILKY WAY

    Energy Technology Data Exchange (ETDEWEB)

    Martinez-Medina, L. A.; Pichardo, B.; Moreno, E.; Peimbert, A. [Instituto de Astronomía, Universidad Nacional Autónoma de México, A.P. 70-264, 04510, México, D.F., México (Mexico); Velazquez, H., E-mail: lamartinez@astro.unam.mx [Instituto de Astronomía, Universidad Nacional Autónoma de México, Apartado Postal 877, 22860 Ensenada, B.C., México (Mexico)

    2016-01-20

    We present a dynamical study of the effect of the bar and spiral arms on the simulated orbits of open clusters in the Galaxy. Specifically, this work is devoted to the puzzling presence of high-altitude open clusters in the Galaxy. For this purpose we employ a very detailed observationally motivated potential model for the Milky Way and a careful set of initial conditions representing the newly born open clusters in the thin disk. We find that the spiral arms are able to raise an important percentage of open clusters (about one-sixth of the total employed in our simulations, depending on the structural parameters of the arms) above the Galactic plane to heights beyond 200 pc, producing a bulge-shaped structure toward the center of the Galaxy. Contrary to what was expected, the spiral arms produce a much greater vertical effect on the clusters than the bar, both in quantity and height; this is due to the sharper concentration of the mass on the spiral arms, when compared to the bar. When a bar and spiral arms are included, spiral arms are still capable of raising an important percentage of the simulated open clusters through chaotic diffusion (as tested from classification analysis of the resultant high-z orbits), but the bar seems to restrain them, diminishing the elevation above the plane by a factor of about two.

  5. Laterally wedged insoles in knee osteoarthritis: do biomechanical effects decline after one month of wear?

    Directory of Open Access Journals (Sweden)

    Bennell Kim L

    2009-11-01

    Full Text Available Abstract Objective This study aimed to determine whether the effect of laterally wedged insoles on the adduction moment in knee osteoarthritis (OA declined after one month of wear, and whether higher reported use of insoles was associated with a reduced effect on the adduction moment at one month. Methods Twenty people with medial compartment OA underwent gait analysis in their own shoes wearing i no insoles and; ii insoles wedged laterally 5° in random order. Testing occurred at baseline and after one month of use of the insoles. Participants recorded daily use of insoles in a log-book. Outcomes were the first and second peak external knee adduction moment and the adduction angular impulse, compared across conditions and time with repeated measures general linear models. Correlations were obtained between total insole use and change in gait parameters with used insoles at one month, and change scores were compared between high and low users of insoles using general linear models. Results There was a significant main effect for condition, whereby insoles significantly reduced the adduction moment (all p Conclusion Effects of laterally wedged insoles on the adduction moment do not appear to decline after one month of continuous use, suggesting that significant wedge degradation does not occur over the short-term.

  6. "OpenLAB": A 2-Hour PCR-Based Practical for High School Students

    Science.gov (United States)

    Bouakaze, Caroline; Eschbach, Judith; Fouquerel, Elise; Gasser, Isabelle; Kieffer, Emmanuelle; Krieger, Sophie; Milosevic, Sara; Saandi, Thoueiba; Florentz, Catherine; Marechal-Drouard, Laurence; Labouesse, Michel

    2010-01-01

    The Strasbourg University PhD school in Life and Health Sciences launched an initiative called "OpenLAB." This project was developed in an effort to help high school teenagers understand theoretical and abstract concepts in genetics. A second objective of this program is to help students in defining their future orientation and to…

  7. Three-phase multilevel inverter configuration for open-winding high power application

    DEFF Research Database (Denmark)

    Sanjeevikumar, Padmanaban; Blaabjerg, Frede; Wheeler, Patrick William

    2015-01-01

    This paper work exploits a new dual open-winding three-phase multilevel inverter configuration suitable for high power medium-voltage applications. Modular structure comprised of standard three-phase voltage source inverter (VSI) along with one additional bi-directional semiconductor device (MOSF...

  8. "OpenLAB": A 2-Hour PCR-Based Practical for High School Students

    Science.gov (United States)

    Bouakaze, Caroline; Eschbach, Judith; Fouquerel, Elise; Gasser, Isabelle; Kieffer, Emmanuelle; Krieger, Sophie; Milosevic, Sara; Saandi, Thoueiba; Florentz, Catherine; Marechal-Drouard, Laurence; Labouesse, Michel

    2010-01-01

    The Strasbourg University PhD school in Life and Health Sciences launched an initiative called "OpenLAB." This project was developed in an effort to help high school teenagers understand theoretical and abstract concepts in genetics. A second objective of this program is to help students in defining their future orientation and to attract them to…

  9. Uniqueness of the Infinite Open Cluster for High-density Percolation on Lattice Sierpinski Carpet

    Institute of Scientific and Technical Information of China (English)

    Xian Yuan WU

    2001-01-01

    We prove the uniqueness of infinite open cluster for high-density bond percolation on latticeSierpinski Carpet; forthermorc, an alternative proof of the existence of phase transition of the modelis given. A rescaling technique is developed and used as the main tool of our proofs.

  10. Open Science CBS Neuroimaging Repository: Sharing ultra-high-field MR images of the brain.

    Science.gov (United States)

    Tardif, Christine Lucas; Schäfer, Andreas; Trampel, Robert; Villringer, Arno; Turner, Robert; Bazin, Pierre-Louis

    2016-01-01

    Magnetic resonance imaging at ultra high field opens the door to quantitative brain imaging at sub-millimeter isotropic resolutions. However, novel image processing tools to analyze these new rich datasets are lacking. In this article, we introduce the Open Science CBS Neuroimaging Repository: a unique repository of high-resolution and quantitative images acquired at 7 T. The motivation for this project is to increase interest for high-resolution and quantitative imaging and stimulate the development of image processing tools developed specifically for high-field data. Our growing repository currently includes datasets from MP2RAGE and multi-echo FLASH sequences from 28 and 20 healthy subjects respectively. These datasets represent the current state-of-the-art in in-vivo relaxometry at 7 T, and are now fully available to the entire neuroimaging community. Copyright © 2015 Elsevier Inc. All rights reserved.

  11. Data Preservation, Reuse and (Open) Access in High-Energy Physics

    CERN Document Server

    Holzner, A; Mele, S

    2008-01-01

    High-Energy Physics is a discipline relying on scientific instruments of unprecedented size and complexity, yielding a "deluge" of non-reproducible data. Surprisingly, preservation, reuse and open access to these data, which are deeply intertwined, are not high on the community agenda. Their inception, implementation and ultimate success are under siege from issues commonly found in the areas of digital preservation. This brief paper gives an introduction to this emerging debate

  12. Perspectives on open access high resolution digital elevation models to produce global flood hazard layers

    Science.gov (United States)

    Sampson, Christopher; Smith, Andrew; Bates, Paul; Neal, Jeffrey; Trigg, Mark

    2015-12-01

    Global flood hazard models have recently become a reality thanks to the release of open access global digital elevation models, the development of simplified and highly efficient flow algorithms, and the steady increase in computational power. In this commentary we argue that although the availability of open access global terrain data has been critical in enabling the development of such models, the relatively poor resolution and precision of these data now limit significantly our ability to estimate flood inundation and risk for the majority of the planet's surface. The difficulty of deriving an accurate 'bare-earth' terrain model due to the interaction of vegetation and urban structures with the satellite-based remote sensors means that global terrain data are often poorest in the areas where people, property (and thus vulnerability) are most concentrated. Furthermore, the current generation of open access global terrain models are over a decade old and many large floodplains, particularly those in developing countries, have undergone significant change in this time. There is therefore a pressing need for a new generation of high resolution and high vertical precision open access global digital elevation models to allow significantly improved global flood hazard models to be developed.

  13. On the Survival of High-Altitude Open Clusters within the Milky Way Galaxy Tides

    CERN Document Server

    Martinez-Medina, L A; Peimbert, A; Moreno, E

    2016-01-01

    It is a common assumption that high-altitude open clusters live longer compared with clusters moving close to the Galactic plane. This is because at high altitudes, open clusters are far from the disruptive effects of in-plane substructures, such as spiral arms, molecular clouds and the bar. However, an important aspect to consider in this scenario is that orbits of high-altitude open clusters will eventually cross the Galactic plane, where the vertical tidal field of the disk is strong. In this work we simulate the interaction of open clusters with the tidal field of a detailed Milky Way Galactic model at different average altitudes and galactocentric radii. We find that the life expectancy of clusters decreases as the maximum orbital altitude increases and reaches a minimum at altitudes of approximately 600 pc. Clusters near the Galactic plane live longer because they do not experience strong vertical tidal shocks from the Galactic disk; then, for orbital altitudes higher than 600 pc, clusters start again t...

  14. Group sequential designs for stepped-wedge cluster randomised trials.

    Science.gov (United States)

    Grayling, Michael J; Wason, James Ms; Mander, Adrian P

    2017-06-01

    The stepped-wedge cluster randomised trial design has received substantial attention in recent years. Although various extensions to the original design have been proposed, no guidance is available on the design of stepped-wedge cluster randomised trials with interim analyses. In an individually randomised trial setting, group sequential methods can provide notable efficiency gains and ethical benefits. We address this by discussing how established group sequential methodology can be adapted for stepped-wedge designs. Utilising the error spending approach to group sequential trial design, we detail the assumptions required for the determination of stepped-wedge cluster randomised trials with interim analyses. We consider early stopping for efficacy, futility, or efficacy and futility. We describe first how this can be done for any specified linear mixed model for data analysis. We then focus on one particular commonly utilised model and, using a recently completed stepped-wedge cluster randomised trial, compare the performance of several designs with interim analyses to the classical stepped-wedge design. Finally, the performance of a quantile substitution procedure for dealing with the case of unknown variance is explored. We demonstrate that the incorporation of early stopping in stepped-wedge cluster randomised trial designs could reduce the expected sample size under the null and alternative hypotheses by up to 31% and 22%, respectively, with no cost to the trial's type-I and type-II error rates. The use of restricted error maximum likelihood estimation was found to be more important than quantile substitution for controlling the type-I error rate. The addition of interim analyses into stepped-wedge cluster randomised trials could help guard against time-consuming trials conducted on poor performing treatments and also help expedite the implementation of efficacious treatments. In future, trialists should consider incorporating early stopping of some kind into

  15. Stable and Critical Noncohesive Coulomb Wedges: Exact Elastic Solutions

    Science.gov (United States)

    Wang, K.; Hu, Y.

    2004-12-01

    The theory of critically tapered Coulomb wedge has been successfully applied to model active fold-and-thrust belts or submarine accretionary prisms. Brittle mountain building is episodic in nature, controlled by changes in basal friction, erosion and sedimentation, and hydrogeology. Sediment accretion may be modulated by great subduction earthquakes. Between deformation episodes and/or during transition between compressional and extensional tectonics, the Coulomb wedges are stable (i.e., supercritical), to which the critical taper theory does not apply. In this work, we provide an exact elastic solution for stable wedges based on Airy stress functions. The stress equilibrium equation and definition of basal friction and basal and internal pore fluid pressure ratios are exactly the same as those used for Dahlen's [1984] exact solution for critical noncohesive Coulomb wedges, but internal friction μ becomes irrelevant. Given elastic - perfectly Coulomb-plastic rheology, for stresses in a wedge on the verge of Coulomb failure there must co-exist a critical taper solution involving μ and a unique equivalent elastic solution not involving μ . Our elastic solution precisely reduces to Dahlen's critical taper solution for critical conditions. For stable conditions, normal stress perpendicular to the surface slope σ z and shear stress τ xz are identical with those in a critical taper, but the slope-parallel normal stress is different. The elastic solution is also generally applicable to purely elastic wedges and useful for modeling geodetic observations. A stable noncohesive Coulomb wedge differs from a general elastic wedge in that its upper and lower surfaces stay at zero curvature during loading. Dahlen, F.A. (1984), Noncohesive critical Coulomb wedges: An exact solution, JGR, 89, 10,125-10,133.

  16. Wavelet Entropy-Based Traction Inverter Open Switch Fault Diagnosis in High-Speed Railways

    Directory of Open Access Journals (Sweden)

    Keting Hu

    2016-03-01

    Full Text Available In this paper, a diagnosis plan is proposed to settle the detection and isolation problem of open switch faults in high-speed railway traction system traction inverters. Five entropy forms are discussed and compared with the traditional fault detection methods, namely, discrete wavelet transform and discrete wavelet packet transform. The traditional fault detection methods cannot efficiently detect the open switch faults in traction inverters because of the low resolution or the sudden change of the current. The performances of Wavelet Packet Energy Shannon Entropy (WPESE, Wavelet Packet Energy Tsallis Entropy (WPETE with different non-extensive parameters, Wavelet Packet Energy Shannon Entropy with a specific sub-band (WPESE3,6, Empirical Mode Decomposition Shannon Entropy (EMDESE, and Empirical Mode Decomposition Tsallis Entropy (EMDETE with non-extensive parameters in detecting the open switch fault are evaluated by the evaluation parameter. Comparison experiments are carried out to select the best entropy form for the traction inverter open switch fault detection. In addition, the DC component is adopted to isolate the failure Isolated Gate Bipolar Transistor (IGBT. The simulation experiments show that the proposed plan can diagnose single and simultaneous open switch faults correctly and timely.

  17. Analyzing Inquiry Questions of High-School Students in a Gas Chromatography Open-Ended Laboratory Experiment

    Science.gov (United States)

    Blonder, Ron; Mamlock-Naaman, Rachel; Hofstein, Avi

    2008-01-01

    This paper describes the implementation of an open-ended inquiry experiment for high-school students, based on gas chromatography (GC). The research focuses on identifying the level of questions that students ask during the GC open inquiry laboratory, and it examines whether implementing the advanced inquiry laboratory opens up new directions for…

  18. Complex interactions between diapirs and 4-D subduction driven mantle wedge circulation.

    Science.gov (United States)

    Sylvia, R. T.; Kincaid, C. R.

    2015-12-01

    Analogue laboratory experiments generate 4-D flow of mantle wedge fluid and capture the evolution of buoyant mesoscale diapirs. The mantle is modeled with viscous glucose syrup with an Arrhenius type temperature dependent viscosity. To characterize diapir evolution we experiment with a variety of fluids injected from multiple point sources. Diapirs interact with kinematically induced flow fields forced by subducting plate motions replicating a range of styles observed in dynamic subduction models (e.g., rollback, steepening, gaps). Data is collected using high definition timelapse photography and quantified using image velocimetry techniques. While many studies assume direct vertical connections between the volcanic arc and the deeper mantle source region, our experiments demonstrate the difficulty of creating near vertical conduits. Results highlight extreme curvature of diapir rise paths. Trench-normal deflection occurs as diapirs are advected downward away from the trench before ascending into wedge apex directed return flow. Trench parallel deflections up to 75% of trench length are seen in all cases, exacerbated by complex geometry and rollback motion. Interdiapir interaction is also important; upwellings with similar trajectory coalesce and rapidly accelerate. Moreover, we observe a new mode of interaction whereby recycled diapir material is drawn down along the slab surface and then initiates rapid fluid migration updip along the slab-wedge interface. Variability in trajectory and residence time leads to complex petrologic inferences. Material from disparate source regions can surface at the same location, mix in the wedge, or become fully entrained in creeping flow adding heterogeneity to the mantle. Active diapirism or any other vertical fluid flux mechanism employing rheological weakening lowers viscosity in the recycling mantle wedge affecting both solid and fluid flow characteristics. Many interesting and insightful results have been presented based

  19. Demonstration of a High Open-Circuit Voltage GaN Betavoltaic Microbattery

    Institute of Scientific and Technical Information of China (English)

    CHENG Zai-Jun; SAN Hai-Sheng; CHEN Xu-Yuan; LIU Bo; FENG Zhi-Hong

    2011-01-01

    A high open-circuit voltage betavoltaic microbattery based on a GaN p-i-n diode is demonstrated.Under the irradiation of a 4× 4mm2 planar solid 63Ni source with an activity of 2mCi,the open-circuit voltage Voc of the fabricated single 2x2mm2 cell reaches as high as 1.62 V,the short-circuit current density Jsc is measured to be 16nA/cm2.The microbattery has a fill factor of 55%,and the energy conversion effciency of beta radiation into electricity reaches to 1.13%.The results suggest that GaN is a highly promising potential candidate for long-life betavoltaic microbatteries used as power supplies for microelectromechanical system devices.

  20. Flow braking and the substorm current wedge

    Science.gov (United States)

    Birn, J.; Hesse, M.; Haerendel, G.; Baumjohann, W.; Shiokawa, K.

    1999-09-01

    Recent models of magnetotail activity have associated the braking of earthward flow with dipolarization and the reduction and diversion of cross-tail current, that is, the signatures of the substorm current wedge. Estimates of the magnitude of the diverted current by Haerendel [1992] and Shiokawa et al. [1997, 1998] tend to be lower than results from computer simulations of magnetotail reconnection and tail collapse [Birn and Hesse, 1996], despite similar underlying models. An analysis of the differences between these estimates on the basis of the simulations gives a more refined picture of the diversion of perpendicular into parallel currents. The inertial currents considered by Haerendel [1992] and Shiokawa et al. [1997] contribute to the initial current reduction and diversion, but the dominant and more permanent contribution stems from the pressure gradient terms, which change in connection with the field collapse and distortion. The major effect results from pressure gradients in the z direction, rather than from the azimuthal gradients [Shiokawa et al., 1998], combined with changes in By and Bx. The reduction of the current density near the equatorial plane is associated with a reduction of the curvature drift which overcompensates changes of the magnetization current and of the gradient B drift current. In contrast to the inertial current effects, the pressure gradient effects persist even after the burst of earthward flow ends.

  1. AZOrange - High performance open source machine learning for QSAR modeling in a graphical programming environment

    Directory of Open Access Journals (Sweden)

    Stålring Jonna C

    2011-07-01

    Full Text Available Abstract Background Machine learning has a vast range of applications. In particular, advanced machine learning methods are routinely and increasingly used in quantitative structure activity relationship (QSAR modeling. QSAR data sets often encompass tens of thousands of compounds and the size of proprietary, as well as public data sets, is rapidly growing. Hence, there is a demand for computationally efficient machine learning algorithms, easily available to researchers without extensive machine learning knowledge. In granting the scientific principles of transparency and reproducibility, Open Source solutions are increasingly acknowledged by regulatory authorities. Thus, an Open Source state-of-the-art high performance machine learning platform, interfacing multiple, customized machine learning algorithms for both graphical programming and scripting, to be used for large scale development of QSAR models of regulatory quality, is of great value to the QSAR community. Results This paper describes the implementation of the Open Source machine learning package AZOrange. AZOrange is specially developed to support batch generation of QSAR models in providing the full work flow of QSAR modeling, from descriptor calculation to automated model building, validation and selection. The automated work flow relies upon the customization of the machine learning algorithms and a generalized, automated model hyper-parameter selection process. Several high performance machine learning algorithms are interfaced for efficient data set specific selection of the statistical method, promoting model accuracy. Using the high performance machine learning algorithms of AZOrange does not require programming knowledge as flexible applications can be created, not only at a scripting level, but also in a graphical programming environment. Conclusions AZOrange is a step towards meeting the needs for an Open Source high performance machine learning platform, supporting the

  2. Casimir Effect for a Semitransparent Wedge and an Annular Piston

    CERN Document Server

    Milton, Kimball A; Kirsten, Klaus

    2009-01-01

    We consider the Casimir energy due to a massless scalar field in a geometry of an infinite wedge closed by a Dirichlet circular cylinder, where the wedge is formed by $\\delta$-function potentials, so-called semitransparent boundaries. A finite expression for the Casimir energy corresponding to the arc and the presence of both semitransparent potentials is obtained, from which the torque on the sidewalls can be derived. The most interesting part of the calculation is the nontrivial nature of the angular mode functions. Numerical results are obtained which are closely analogous to those recently found for a magnetodielectric wedge, with the same speed of light on both sides of the wedge boundaries. Alternative methods are developed for annular regions with radial semitransparent potentials, based on reduced Green's functions for the angular dependence, which allows calculations using the multiple-scattering formalism. Numerical results corresponding to the torque on the radial plates are likewise computed, whic...

  3. Electrodynamic Casimir effect in a medium-filled wedge.

    Science.gov (United States)

    Brevik, Iver; Ellingsen, Simen A; Milton, Kimball A

    2009-04-01

    We re-examine the electrodynamic Casimir effect in a wedge defined by two perfect conductors making dihedral angle alpha=pi/p. This system is analogous to the system defined by a cosmic string. We consider the wedge region as filled with an azimuthally symmetric material, with permittivity and permeability epsilon1, micro1 for distance from the axis ra. The results are closely related to those for a circular-cylindrical geometry, but with noninteger azimuthal quantum number mp. Apart from a zero-mode divergence, which may be removed by choosing periodic boundary conditions on the wedge, and may be made finite if dispersion is included, we obtain finite results for the free energy corresponding to changes in a for the case when the speed of light is the same inside and outside the radius a , and for weak coupling, |epsilon1-epsilon2|cosmic string, situated along the cusp line of the pre-existing wedge.

  4. ELASTIC INTERACTION BETWEEN WEDGE DISCLINATION DIPOLE AND INTERNAL CRACK

    Institute of Scientific and Technical Information of China (English)

    FANG Qi-hong; LIU You-wen

    2006-01-01

    The system of a wedge disclination dipole interacting with an internal crack was investigated. By using the complex variable method, the closed form solutions of complex potentials to this problem were presented. The analytic formulae of the physics variables, such as stress intensity factors at the tips of the crack produced by the wedge disclination dipole and the image force acting on disclination dipole center were obtained.The influence of the orientation, the dipole arm and the location of the disclination dipole on the stress intensity factors was discussed in detail. Furthermore, the equilibrium position of the wedge disclination dipole was also examined. It is shown that the shielding or antishielding effect of the wedge disclination to the stress intensity factors is significant when the disclination dipole moves to the crack tips.

  5. Reactive Atom Plasma Processing of Slumped Glass Wedges Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Reactive Atom Plasma (RAPTM) process will be evaluated as a rapid and practical method for fabricating precision wedges in glass sheets. The glass sheets are to...

  6. Properties of HIGH-Tc Cuprates: Some Recent Results and Open Questions

    Science.gov (United States)

    Vobornik, Ivana; Pavuna, Davor

    Thirteen years ago, late in 1986, several groups confirmed striking claims of the famous paper by Bednorz and M[Z Phys. B 64 (1986) 189] that announced the discovery of high-Tc superconductivity in cuprates. Some 60,000 papers later, we are still struggling to understand the high-Tc oxide superconductivity. Here we present some of the most relevant recent experiments and discuss some open questions across rather complex electronic phase diagram; we also note an important role of un-intentional and intentional disorder in these layered, high-Tc oxides.

  7. High Accuracy Gravitational Waveforms from Black Hole Binary Inspirals Using OpenCL

    CERN Document Server

    McKennon, Justin; Khanna, Gaurav

    2012-01-01

    There is a strong need for high-accuracy and efficient modeling of extreme-mass-ratio binary black hole systems because these are strong sources of gravitational waves that would be detected by future observatories. In this article, we present sample results from our Teukolsky EMRI code: a time-domain Teukolsky equation solver (a linear, hyperbolic, partial differential equation solver using finite-differencing), that takes advantage of several mathematical and computational enhancements to efficiently generate long-duration and high-accuracy EMRI waveforms. We emphasize here the computational advances made in the context of this code. Currently there is considerable interest in making use of many-core processor architectures, such as Nvidia and AMD graphics processing units (GPUs) for scientific computing. Our code uses the Open Computing Language (OpenCL) for taking advantage of the massive parallelism offered by modern GPU architectures. We present the performance of our Teukolsky EMRI code on multiple mod...

  8. POLITO- A new open-source, platform independent software for generating high-quality lithostratigraphic columns

    Directory of Open Access Journals (Sweden)

    Cipran C. Stremtan

    2010-08-01

    Full Text Available POLITO is a free, open-source, and platform-independent software which can automatically generate lithostratigraphic columns from field data. Its simple and easy to use interface allows users to manipulate large datasets and create high-quality graphical outputs, either in editable vector or raster format, or as PDF files. POLITO uses USGS standard lithology patterns and can be downloaded from its Sourceforge project page (http://sourceforge.net/projects/polito/.

  9. Effective median sternotomy closure in high-risk open heart patients.

    Science.gov (United States)

    Bek, Eugene L; Yun, Kwok L; Kochamba, Gary S; Pfeffer, Thomas A

    2010-04-01

    We describe a novel surgical technique with a median sternotomy closure in high-risk open heart patients. In contrast to conventional sternal closure, in which sternal wires are passed through the intercostal space, the novel technique in sternal closure passes sternal wires transcostally or through costo-chondral joints. Copyright (c) 2010 The Society of Thoracic Surgeons. Published by Elsevier Inc. All rights reserved.

  10. Stem thrust prediction model for W-K-M double wedge parallel expanding gate valves

    Energy Technology Data Exchange (ETDEWEB)

    Eldiwany, B.; Alvarez, P.D. [Kalsi Engineering Inc., Sugar Land, TX (United States); Wolfe, K. [Electric Power Research Institute, Palo Alto, CA (United States)

    1996-12-01

    An analytical model for determining the required valve stem thrust during opening and closing strokes of W-K-M parallel expanding gate valves was developed as part of the EPRI Motor-Operated Valve Performance Prediction Methodology (EPRI MOV PPM) Program. The model was validated against measured stem thrust data obtained from in-situ testing of three W-K-M valves. Model predictions show favorable, bounding agreement with the measured data for valves with Stellite 6 hardfacing on the disks and seat rings for water flow in the preferred flow direction (gate downstream). The maximum required thrust to open and to close the valve (excluding wedging and unwedging forces) occurs at a slightly open position and not at the fully closed position. In the nonpreferred flow direction, the model shows that premature wedging can occur during {Delta}P closure strokes even when the coefficients of friction at different sliding surfaces are within the typical range. This paper summarizes the model description and comparison against test data.

  11. OpenTopography: Enabling Online Access to High-Resolution Lidar Topography Data and Processing Tools

    Science.gov (United States)

    Crosby, Christopher; Nandigam, Viswanath; Baru, Chaitan; Arrowsmith, J. Ramon

    2013-04-01

    High-resolution topography data acquired with lidar (light detection and ranging) technology are revolutionizing the way we study the Earth's surface and overlying vegetation. These data, collected from airborne, tripod, or mobile-mounted scanners have emerged as a fundamental tool for research on topics ranging from earthquake hazards to hillslope processes. Lidar data provide a digital representation of the earth's surface at a resolution sufficient to appropriately capture the processes that contribute to landscape evolution. The U.S. National Science Foundation-funded OpenTopography Facility (http://www.opentopography.org) is a web-based system designed to democratize access to earth science-oriented lidar topography data. OpenTopography provides free, online access to lidar data in a number of forms, including the raw point cloud and associated geospatial-processing tools for customized analysis. The point cloud data are co-located with on-demand processing tools to generate digital elevation models, and derived products and visualizations which allow users to quickly access data in a format appropriate for their scientific application. The OpenTopography system is built using a service-oriented architecture (SOA) that leverages cyberinfrastructure resources at the San Diego Supercomputer Center at the University of California San Diego to allow users, regardless of expertise level, to access these massive lidar datasets and derived products for use in research and teaching. OpenTopography hosts over 500 billion lidar returns covering 85,000 km2. These data are all in the public domain and are provided by a variety of partners under joint agreements and memoranda of understanding with OpenTopography. Partners include national facilities such as the NSF-funded National Center for Airborne Lidar Mapping (NCALM), as well as non-governmental organizations and local, state, and federal agencies. OpenTopography has become a hub for high-resolution topography

  12. CHIRP seismic reflection study of falling-stage (forced regressive) sediment wedges on the New Jersey outer continental shelf

    Science.gov (United States)

    Santra, M.; Goff, J.; Ron, S.; Austin, J.

    2007-12-01

    High-resolution (1-12 kHz), deep-towed and hull-mounted CHIRP seismic data were collected on the New Jersey outer shelf in 2001, 2002 and 2006 as part of Office of Naval Research-funded projects. These data have imaged two well-developed, offlapping sedimentary wedges (named outer-shelf wedge and deep-shelf wedge) that are now postulated to have developed on the falling-stage limb of the last glacial cycle, during some time prior to the Last Glacial Maximum (20-22 kyrs BP). These wedges formed atop the high-amplitude, regional R horizon, a complex erosional unconformity that formed about 40,000 years ago. The outer shelf wedge is also characterized in part by an enigmatic, erose boundary separating layered horizons below from a mostly transparent section above. New Jersey shelf wedges appear analogous to forced-regressive units imaged on the Rhone shelf edge, as well as Eocene sections documented from seismic-scale outcrops on Spitsbergen Island. These examples can reach thicknesses up to 100 m on the shelf edge and uppermost slope, but usually thin rapidly downslope. Such wedges represent one of two documented mechanisms involving sand transport across a shelf margin into deeper water settings, the other being a canyonized shelf-edge. Our study will includes analysis of the CHIRP data and, if available, additional ground truth provided by short cores collected in summer 2007 at numerous intra-wedge stratigraphic horizons. Our goals are to understand the external and internal geometry of the wedges and sediment pathways across the paleo-shelf. These data should allow us to characterize margin segments that build during sea-level fall by slope-apron accretion rather than by the formation of channel-levee complexes. The literature is heavily weighted by the latter and their associated canyon systems, but information on shelf-edge attached slope aprons and how they contribute to deep-water sedimentation, and in particular the delivery of clean sands to slope settings

  13. On the Origin of High-Altitude Open Clusters in the Milky Way

    CERN Document Server

    Martinez-Medina, L A; Moreno, E; Peimbert, A; Velazquez, H

    2016-01-01

    We present a dynamical study of the effect of the bar and spiral arms on the simulated orbits of open clusters in the Galaxy. Specifically, this work is devoted to the puzzling presence of high-altitude open clusters in the Galaxy. For this purpose we employ a very detailed observationally motivated potential model for the Milky Way and a careful set of initial conditions representing the newly born open clusters in the thin disk. We find that the spiral arms are able to raise an important percentage of open clusters (about one-sixth of the total employed in our simulations, depending on the structural parameters of the arms) above the Galactic plane to heights beyond 200 pc, producing a bulge-shaped structure toward the center of the Galaxy. Contrary to what was expected, the spiral arms produce a much greater vertical effect on the clusters than the bar, both in quantity and height; this is due to the sharper concentration of the mass on the spiral arms, when compared to the bar. When a bar and spiral arms ...

  14. Image Harvest: an open-source platform for high-throughput plant image processing and analysis.

    Science.gov (United States)

    Knecht, Avi C; Campbell, Malachy T; Caprez, Adam; Swanson, David R; Walia, Harkamal

    2016-05-01

    High-throughput plant phenotyping is an effective approach to bridge the genotype-to-phenotype gap in crops. Phenomics experiments typically result in large-scale image datasets, which are not amenable for processing on desktop computers, thus creating a bottleneck in the image-analysis pipeline. Here, we present an open-source, flexible image-analysis framework, called Image Harvest (IH), for processing images originating from high-throughput plant phenotyping platforms. Image Harvest is developed to perform parallel processing on computing grids and provides an integrated feature for metadata extraction from large-scale file organization. Moreover, the integration of IH with the Open Science Grid provides academic researchers with the computational resources required for processing large image datasets at no cost. Image Harvest also offers functionalities to extract digital traits from images to interpret plant architecture-related characteristics. To demonstrate the applications of these digital traits, a rice (Oryza sativa) diversity panel was phenotyped and genome-wide association mapping was performed using digital traits that are used to describe different plant ideotypes. Three major quantitative trait loci were identified on rice chromosomes 4 and 6, which co-localize with quantitative trait loci known to regulate agronomically important traits in rice. Image Harvest is an open-source software for high-throughput image processing that requires a minimal learning curve for plant biologists to analyzephenomics datasets.

  15. Modular, flexible, and expandable high-performance image archiving and retrieving open-architecture system

    Science.gov (United States)

    Chen, Y. P.

    1992-07-01

    In today''s economy, it takes significant funds to establish a high-performance image archival and retrieval system for any image application. One cost effective approach is to build the system in multiple phases but there is concern that technology is advancing rapidly and the original system may not be able to take advantage of new features. The concept of an open- architecture modular, flexible and expandable system is an essential element to achieving a high-performance image archival and retrieval system within a realistic short period of time. This paper introduces a proposal for a modular, flexible, and expandable image archival and retrieval open-architecture system to stimulate discussion and thinking. It will cover the following areas: (1) data archival and retrieval requirements such as storage capacity and data management, (2) data communication and distribution requirements using local area networks and/or wide area networks, (3) the architectural requirements such as adopting industry standards for hardware and software, and (4) an example of such open-architecture system to demonstrate the feasibility of implementing a modular, flexible, and expandable high- performance image archival and retrieval system.

  16. Optical refractometry based on Fresnel diffraction from a phase wedge.

    Science.gov (United States)

    Tavassoly, M Taghi; Saber, Ahad

    2010-11-01

    A method that utilizes the Fresnel diffraction of light from the phase step formed by a transparent wedge is introduced for measuring the refractive indices of transparent solids, liquids, and solutions. It is shown that, as a transparent wedge of small apex angle is illuminated perpendicular to its surface by a monochromatic parallel beam of light, the Fresnel fringes, caused by abrupt change in refractive index at the wedge lateral boundary, are formed on a screen held perpendicular to the beam propagation direction. The visibility of the fringes varies periodically between zero and 1 in the direction normal to the wedge apex. For a known or measured apex angle, the wedge refractive index is obtained by measuring the period length by a CCD. To measure the refractive index of a transparent liquid or solution, the wedge is installed in a transparent rectangle cell containing the sample. Then, the cell is illuminated perpendicularly and the visibility period is measured. By using modest optics, one can measure the refractive index at a relative uncertainty level of 10(-5). There is no limitation on the refractive index range. The method can be applied easily with no mechanical manipulation. The measuring apparatus can be very compact with low mechanical and optical noises.

  17. Wedge excision of the nail fold in the treatment of ingrown toenail.

    Science.gov (United States)

    Persichetti, Paolo; Simone, Pierfranco; Li Vecchi, Giancarlo; Di Lella, Filippo; Cagli, Barbara; Marangi, Giovanni Francesco

    2004-06-01

    Many treatment modalities of ingrown toenail are reported in the literature, often associated with unacceptably high recurrence rate. The authors present their technique, which aims at reducing the convexity of the nail fold. After complete removal of the nail plate and accurate debridement of the granulomatous tissue, a wedge-shaped ellipsis of skin and subcutaneous tissue, lateral to the affected nail fold, is removed. Approximation of the margins of the resulting defect determines eversion of the nail fold. One hundred twenty ingrown toenails were treated with the wedge excision of the nail fold at the outpatient clinic of the department of plastic surgery, Campus Bio-Medico University, Rome, Italy, between January 1998 and January 2002. Six recurrences were observed. In addition to the high cure rate, short postoperative pain duration, and morbidity as well as low risk of postoperative infection, the remarkable esthetic results achievable with this method are indicated.

  18. OpenMSI: a high-performance web-based platform for mass spectrometry imaging.

    Science.gov (United States)

    Rübel, Oliver; Greiner, Annette; Cholia, Shreyas; Louie, Katherine; Bethel, E Wes; Northen, Trent R; Bowen, Benjamin P

    2013-11-05

    Mass spectrometry imaging (MSI) enables researchers to directly probe endogenous molecules directly within the architecture of the biological matrix. Unfortunately, efficient access, management, and analysis of the data generated by MSI approaches remain major challenges to this rapidly developing field. Despite the availability of numerous dedicated file formats and software packages, it is a widely held viewpoint that the biggest challenge is simply opening, sharing, and analyzing a file without loss of information. Here we present OpenMSI, a software framework and platform that addresses these challenges via an advanced, high-performance, extensible file format and Web API for remote data access (http://openmsi.nersc.gov). The OpenMSI file format supports storage of raw MSI data, metadata, and derived analyses in a single, self-describing format based on HDF5 and is supported by a large range of analysis software (e.g., Matlab and R) and programming languages (e.g., C++, Fortran, and Python). Careful optimization of the storage layout of MSI data sets using chunking, compression, and data replication accelerates common, selective data access operations while minimizing data storage requirements and are critical enablers of rapid data I/O. The OpenMSI file format has shown to provide >2000-fold improvement for image access operations, enabling spectrum and image retrieval in less than 0.3 s across the Internet even for 50 GB MSI data sets. To make remote high-performance compute resources accessible for analysis and to facilitate data sharing and collaboration, we describe an easy-to-use yet powerful Web API, enabling fast and convenient access to MSI data, metadata, and derived analysis results stored remotely to facilitate high-performance data analysis and enable implementation of Web based data sharing, visualization, and analysis.

  19. OpenMSI: A High-Performance Web-Based Platform for Mass Spectrometry Imaging

    Energy Technology Data Exchange (ETDEWEB)

    Rubel, Oliver; Greiner, Annette; Cholia, Shreyas; Louie, Katherine; Bethel, E. Wes; Northen, Trent R.; Bowen, Benjamin P.

    2013-10-02

    Mass spectrometry imaging (MSI) enables researchers to directly probe endogenous molecules directly within the architecture of the biological matrix. Unfortunately, efficient access, management, and analysis of the data generated by MSI approaches remain major challenges to this rapidly developing field. Despite the availability of numerous dedicated file formats and software packages, it is a widely held viewpoint that the biggest challenge is simply opening, sharing, and analyzing a file without loss of information. Here we present OpenMSI, a software framework and platform that addresses these challenges via an advanced, high-performance, extensible file format and Web API for remote data access (http://openmsi.nersc.gov). The OpenMSI file format supports storage of raw MSI data, metadata, and derived analyses in a single, self-describing format based on HDF5 and is supported by a large range of analysis software (e.g., Matlab and R) and programming languages (e.g., C++, Fortran, and Python). Careful optimization of the storage layout of MSI data sets using chunking, compression, and data replication accelerates common, selective data access operations while minimizing data storage requirements and are critical enablers of rapid data I/O. The OpenMSI file format has shown to provide >2000-fold improvement for image access operations, enabling spectrum and image retrieval in less than 0.3 s across the Internet even for 50 GB MSI data sets. To make remote high-performance compute resources accessible for analysis and to facilitate data sharing and collaboration, we describe an easy-to-use yet powerful Web API, enabling fast and convenient access to MSI data, metadata, and derived analysis results stored remotely to facilitate high-performance data analysis and enable implementation of Web based data sharing, visualization, and analysis.

  20. Deriving Animal Behaviour from High-Frequency GPS: Tracking Cows in Open and Forested Habitat.

    Science.gov (United States)

    de Weerd, Nelleke; van Langevelde, Frank; van Oeveren, Herman; Nolet, Bart A; Kölzsch, Andrea; Prins, Herbert H T; de Boer, W Fred

    2015-01-01

    The increasing spatiotemporal accuracy of Global Navigation Satellite Systems (GNSS) tracking systems opens the possibility to infer animal behaviour from tracking data. We studied the relationship between high-frequency GNSS data and behaviour, aimed at developing an easily interpretable classification method to infer behaviour from location data. Behavioural observations were carried out during tracking of cows (Bos Taurus) fitted with high-frequency GPS (Global Positioning System) receivers. Data were obtained in an open field and forested area, and movement metrics were calculated for 1 min, 12 s and 2 s intervals. We observed four behaviour types (Foraging, Lying, Standing and Walking). We subsequently used Classification and Regression Trees to classify the simultaneously obtained GPS data as these behaviour types, based on distances and turning angles between fixes. GPS data with a 1 min interval from the open field was classified correctly for more than 70% of the samples. Data from the 12 s and 2 s interval could not be classified successfully, emphasizing that the interval should be long enough for the behaviour to be defined by its characteristic movement metrics. Data obtained in the forested area were classified with a lower accuracy (57%) than the data from the open field, due to a larger positional error of GPS locations and differences in behavioural performance influenced by the habitat type. This demonstrates the importance of understanding the relationship between behaviour and movement metrics, derived from GNSS fixes at different frequencies and in different habitats, in order to successfully infer behaviour. When spatially accurate location data can be obtained, behaviour can be inferred from high-frequency GNSS fixes by calculating simple movement metrics and using easily interpretable decision trees. This allows for the combined study of animal behaviour and habitat use based on location data, and might make it possible to detect deviations

  1. Remote Sensing of Open Water in Northern High Latitudes for use in Hydrologic Modeling

    Science.gov (United States)

    Podest, E.; McDonald, K. C.; Kimball, J.; Maumenee, N.; Bohn, T.; Lettenmaier, D.; Bowling, L.

    2007-12-01

    In the northern high latitudes open water bodies are common landscape features, having a large influence on hydrologic processes as well as surface-atmosphere carbon exchange and associated impacts on global climate. It is therefore of great importance to assess their spatial extent and temporal character in order to improve hydrologic and ecosystem process modeling. Spaceborne synthetic aperture radar (SAR) is an effective tool for this purpose since it is particularly sensitive to surface water and it can monitor large inaccessible areas on a temporal basis regardless of atmospheric conditions or solar illumination. We employ multi-temporal L-band SAR data from the Japanese Earth Remote Sensing Satellite (JERS-1) and ALOS PALSAR to map open water bodies across Alaska and Eurasia. A supervised decision tree-based classification approach was used to generate open water maps. For Alaska, we assembled regional-scale monthly JERS-1 SAR mosaics from data acquired during 1998. Digital elevation model (DEM) terrain and slope information were also employed in the decision tree classifier. These supplementary data aided significantly in improving classification performance in topographically complex regions where radar shadowing was prevalent. For study regions in Eurasia, PALSAR data was used in conjunction with JERS-1 imagery to map spatial patterns and seasonal variability in open water characteristics over selected study basins. These results were examined in relation to regional topographic and land cover characteristics. Classification results were also evaluated relative to other open water and land cover classification maps derived from Landsat, AVHRR, MODIS and SRTM. This work was carried out at the Jet Propulsion Laboratory, California Institute of Technology; at the University of Montana; at the University of Washington; and at Purdue University under contract with the National Aeronautics and Space Administration.

  2. One-way successive plate cross wedge rolling machine

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    In our last paper(Sci China Ser E-Tech Sci,2009,52(11):3117-3121) we designed the precision forming machine with rolling plate CWR(cross wedge rolling).This kind of machine colligates the advantages of high rigidity and small floor space for roller CWR machine and those of simple die manufacture and high precision for plate CWR machine.At the same time,it abandons the shortcomings of complex die manufacture and poor precision for roller CWR machine,and those of poor rigidity and large floor space for plate CWR machine.During rolling,the upper and lower rolling plates of the machine make reciprocating slide toward or away from each other,so the inertial forces should be overcome,which will cause great energy loss,besides,large floor space is needed when the rolled workpiece is large.In order to solve the above problems,this paper presents the one-way successive plate CWR machine,whose rolling plates need not make reciprocating slide.Hence,it has high energy utilization efficiency and production efficiency.Furthermore,the roll scale can be removed automatically.In particular,the machine can produce large axisymmetrical workpieces.

  3. Hydrodynamic controls on oxygen dynamics in a riverine salt wedge estuary, the Yarra River estuary, Australia

    Science.gov (United States)

    Bruce, L. C.; Cook, P. L. M.; Teakle, I.; Hipsey, M. R.

    2014-04-01

    Oxygen depletion in coastal and estuarine waters has been increasing rapidly around the globe over the past several decades, leading to decline in water quality and ecological health. In this study we apply a numerical model to understand how salt wedge dynamics, changes in river flow and temperature together control oxygen depletion in a micro-tidal riverine estuary, the Yarra River estuary, Australia. Coupled physical-biogeochemical models have been previously applied to study how hydrodynamics impact upon seasonal hypoxia; however, their application to relatively shallow, narrow riverine estuaries with highly transient patterns of river inputs and sporadic periods of oxygen depletion has remained challenging, largely due to difficulty in accurately simulating salt wedge dynamics in morphologically complex areas. In this study we overcome this issue through application of a flexible mesh 3-D hydrodynamic-biogeochemical model in order to predict the extent of salt wedge intrusion and consequent patterns of oxygen depletion. The extent of the salt wedge responded quickly to the sporadic riverine flows, with the strength of stratification and vertical density gradients heavily influenced by morphological features corresponding to shallow points in regions of tight curvature ("horseshoe" bends). The spatiotemporal patterns of stratification led to the emergence of two "hot spots" of anoxia, the first downstream of a shallow region of tight curvature and the second downstream of a sill. Whilst these areas corresponded to regions of intense stratification, it was found that antecedent conditions related to the placement of the salt wedge played a major role in the recovery of anoxic regions following episodic high flow events. Furthermore, whilst a threshold salt wedge intrusion was a requirement for oxygen depletion, analysis of the results allowed us to quantify the effect of temperature in determining the overall severity and extent of hypoxia and anoxia. Climate

  4. Effects of slot closure by soft magnetic powder wedge material in axial-field permanent magnet brushless machines

    Science.gov (United States)

    Gair, S.; Eastham, J. F.; Canova, A.

    1996-04-01

    The article reports on a study of the effects of slot closure in axial-field permanent magnet brushless machines by a two-dimensional finite element method (2D FEM) of analysis. The closure of the slots is made by using soft magnetic powder wedge material. Parameter values and machine performance for the open and closed slot configuration are computed. In order to test the 2D FEM model, calculated results are compared with measurements and favorable agreement is shown.

  5. Convergence of high order perturbative expansions in open system quantum dynamics

    Science.gov (United States)

    Xu, Meng; Song, Linze; Song, Kai; Shi, Qiang

    2017-02-01

    We propose a new method to directly calculate high order perturbative expansion terms in open system quantum dynamics. They are first written explicitly in path integral expressions. A set of differential equations are then derived by extending the hierarchical equation of motion (HEOM) approach. As two typical examples for the bosonic and fermionic baths, specific forms of the extended HEOM are obtained for the spin-boson model and the Anderson impurity model. Numerical results are then presented for these two models. General trends of the high order perturbation terms as well as the necessary orders for the perturbative expansions to converge are analyzed.

  6. Open-path, quantum cascade laser-based sensor for high resolution atmospheric ammonia measurements

    Directory of Open Access Journals (Sweden)

    D. J. Miller

    2013-07-01

    Full Text Available We demonstrate a compact, open-path, quantum cascade laser-based atmospheric ammonia sensor operating at 9.06 μm for high sensitivity, high temporal resolution, ground-based measurements. Atmospheric ammonia (NH3 is a gas-phase precursor to fine particulate matter, with implications for air quality and climate change. Currently, NH3 sensing challenges have led to a lack of widespread in-situ measurements. Our open-path sensor configuration avoids sampling artifacts associated with NH3 surface adsorption onto inlet tubing and reduced pressure sampling cells, as well as condensed-phase partitioning ambiguities. Multi-harmonic wavelength modulation spectroscopy allows for selective and sensitive detection of atmospheric-pressure broadened absorption features. An in-line ethylene reference cell provides real-time calibration (±20% accuracy and normalization for instrument drift under rapidly changing field conditions. The sensor has a sensitivity and minimum detection limit of 0.15 ppbv NH3 at 10 Hz, a mass of ~ 5 kg and consumes ~ 50 W of electrical power. In-situ field performance of this open-path NH3 sensor is demonstrated, with 10 Hz time resolution and a large dynamic response for in-situ NH3 measurements. This sensor provides the capabilities for improved in-situ gas phase NH3 sensing relevant for emission source characterization and flux measurements.

  7. Measured Two-Dimensional Ice-Wedge Polygon Thermal Dynamics

    Science.gov (United States)

    Cable, William; Romanovsky, Vladimir; Busey, Robert

    2016-04-01

    Ice-wedge polygons are perhaps the most dominant permafrost related features in the arctic landscape. The microtopography of these features, that includes rims, troughs, and high and low polygon centers, alters the local hydrology, as water tends to collect in the low areas. During winter, wind redistribution of snow leads to an increased snowpack depth in the low areas, while the slightly higher areas often have very thin snow cover, leading to differences across the landscape in vegetation communities and soil moisture between higher and lower areas. These differences in local surface conditions lead to spatial variability of the ground thermal regime in the different microtopographic areas and between different types of ice-wedge polygons. To study these features in depth, we established temperature transects across four different types of ice-wedge polygons near Barrow, Alaska. The transects were composed of five vertical array thermistor probes (VATP) beginning in the center of each polygon and extending through the trough to the rim of the adjacent polygon. Each VATP had 16 thermistors from the surface to a depth of 1.5 m. In addition to these 80 subsurface temperature measurement points per polygon, soil moisture, thermal conductivity, heat flux, and snow depth were all measured in multiple locations for each polygon. Above ground, a full suite of micrometeorological instrumentation was present at each polygon. Data from these sites has been collected continuously for the last three years. We found snow cover, timing and depth, and active layer soil moisture to be major controlling factors in the observed thermal regimes. In troughs and in the centers of low-center polygons, the combined effect of typically saturated soils and increased snow accumulation resulted in the highest mean annual ground temperatures (MAGT). Additionally, these areas were the last part of the polygon to refreeze during the winter. However, increased active layer thickness was not

  8. Exploring Infiniband Hardware Virtualization in OpenNebula towards Efficient High-Performance Computing

    Energy Technology Data Exchange (ETDEWEB)

    Pais Pitta de Lacerda Ruivo, Tiago [IIT, Chicago; Bernabeu Altayo, Gerard [Fermilab; Garzoglio, Gabriele [Fermilab; Timm, Steven [Fermilab; Kim, Hyun-Woo [Fermilab; Noh, Seo-Young [KISTI, Daejeon; Raicu, Ioan [IIT, Chicago

    2014-11-11

    has been widely accepted that software virtualization has a big negative impact on high-performance computing (HPC) application performance. This work explores the potential use of Infiniband hardware virtualization in an OpenNebula cloud towards the efficient support of MPI-based workloads. We have implemented, deployed, and tested an Infiniband network on the FermiCloud private Infrastructure-as-a-Service (IaaS) cloud. To avoid software virtualization towards minimizing the virtualization overhead, we employed a technique called Single Root Input/Output Virtualization (SRIOV). Our solution spanned modifications to the Linux’s Hypervisor as well as the OpenNebula manager. We evaluated the performance of the hardware virtualization on up to 56 virtual machines connected by up to 8 DDR Infiniband network links, with micro-benchmarks (latency and bandwidth) as well as w a MPI-intensive application (the HPL Linpack benchmark).

  9. Periodical zonal character of damage near the openings in highly-stressed rock mass conditions

    Directory of Open Access Journals (Sweden)

    Vladimir V. Makarov

    2016-04-01

    Full Text Available Rock mass damage at great depths near underground openings is often of a zonal character. However, the classical elastoplastic theory fails to explain sufficiently all properties of zonal failure structures. A new non-Euclidean mathematical model for highly-stressed rock mass was developed based on the principles of mechanics of defected material and non-equilibrium thermodynamics. Methods were developed to determine model parameters that provide satisfactory correspondence between the experimental findings concerning faulted zonal structures near openings at great depths and mathematical calculations. The mechanism of this phenomenon was discovered which consisted in a periodical character of stresses in the surrounding rock mass and development of tensile macrocracks at zones of maximal tangential stresses. Main relationships between the cracking zone width and rock mass strength were established.

  10. Scalable High Performance Message Passing over InfiniBand for Open MPI

    Energy Technology Data Exchange (ETDEWEB)

    Friedley, A; Hoefler, T; Leininger, M L; Lumsdaine, A

    2007-10-24

    InfiniBand (IB) is a popular network technology for modern high-performance computing systems. MPI implementations traditionally support IB using a reliable, connection-oriented (RC) transport. However, per-process resource usage that grows linearly with the number of processes, makes this approach prohibitive for large-scale systems. IB provides an alternative in the form of a connectionless unreliable datagram transport (UD), which allows for near-constant resource usage and initialization overhead as the process count increases. This paper describes a UD-based implementation for IB in Open MPI as a scalable alternative to existing RC-based schemes. We use the software reliability capabilities of Open MPI to provide the guaranteed delivery semantics required by MPI. Results show that UD not only requires fewer resources at scale, but also allows for shorter MPI startup times. A connectionless model also improves performance for applications that tend to send small messages to many different processes.

  11. Open Source Drug Discovery: Highly Potent Antimalarial Compounds Derived from the Tres Cantos Arylpyrroles

    Science.gov (United States)

    2016-01-01

    The development of new antimalarial compounds remains a pivotal part of the strategy for malaria elimination. Recent large-scale phenotypic screens have provided a wealth of potential starting points for hit-to-lead campaigns. One such public set is explored, employing an open source research mechanism in which all data and ideas were shared in real time, anyone was able to participate, and patents were not sought. One chemical subseries was found to exhibit oral activity but contained a labile ester that could not be replaced without loss of activity, and the original hit exhibited remarkable sensitivity to minor structural change. A second subseries displayed high potency, including activity within gametocyte and liver stage assays, but at the cost of low solubility. As an open source research project, unexplored avenues are clearly identified and may be explored further by the community; new findings may be cumulatively added to the present work. PMID:27800551

  12. tranSMART: An Open Source Knowledge Management and High Content Data Analytics Platform.

    Science.gov (United States)

    Scheufele, Elisabeth; Aronzon, Dina; Coopersmith, Robert; McDuffie, Michael T; Kapoor, Manish; Uhrich, Christopher A; Avitabile, Jean E; Liu, Jinlei; Housman, Dan; Palchuk, Matvey B

    2014-01-01

    The tranSMART knowledge management and high-content analysis platform is a flexible software framework featuring novel research capabilities. It enables analysis of integrated data for the purposes of hypothesis generation, hypothesis validation, and cohort discovery in translational research. tranSMART bridges the prolific world of basic science and clinical practice data at the point of care by merging multiple types of data from disparate sources into a common environment. The application supports data harmonization and integration with analytical pipelines. The application code was released into the open source community in January 2012, with 32 instances in operation. tranSMART's extensible data model and corresponding data integration processes, rapid data analysis features, and open source nature make it an indispensable tool in translational or clinical research.

  13. Coulomb theory applied to accretionary and nonaccretionary wedges: Possible causes for tectonic erosion and/or frontal accretion

    Science.gov (United States)

    Lallemand, Serge E.; Schnürle, Philippe; Malavieille, Jacques

    1994-06-01

    Based on observations from both modem convergent margins and sandbox modeling, we examine the possible conditions favoring frontal accretion and/or frontal and basal tectonic erosion. Mean characteristic parameters (μ, μ*b and λ) are used to discuss the mechanical stability of 28 transects across the frontal part of convergent margins where the Coulomb theory is applicable. Natural observations reveal that "typical accretionary wedges" are characterized by low tapers with smooth surface slope and subducting plate, low convergence rates and thick trench sediment, while "nonaccretionary wedges" display large tapers with irregular surface slopes and rough subducting plate, high convergence rates and almost no trench fill. Sandbox experiments were performed to illustrate the effects of seamounts/ridges in the subduction zone on the deformation of an accretionary wedge. These experiments show that a wedge of sand is first trapped and pushed in front of the seamount which acts as a moving bulldozer. This is followed by a tunnelling effect of the subducting seamount through the frontal wedge material, which results in considerable sand reworking. At an advanced subduction stage, the décollement jumps back from a high level in the wedge to its former basal position. We conclude that a high trench sedimentation rate relative to the convergence rate leads to frontal accretion. In contrast, several conditions may favor tectonic erosion of the upper plate. First, oceanic features, such as grabens, seamounts or ridges, may trap upper plate material during their subduction process. Second, destabilization of the upper plate material by internal fluid overpressuring causing hydrofracturing is probably another important mechanism.

  14. A sustainable business model for Open-Access journal publishing a proposed plan for High-Energy Physics

    CERN Document Server

    Vigen, Jens

    2007-01-01

    The High Energy Physics community over the last 15 years has achieved so-called full green Open Access through the wide dissemination of preprints via arXiv, a central subject repository managed by Cornell University. However, green Open Access does not alleviate the economic difficulties of libraries as they are still expected to offer access to versions of record of the peer-reviewed literature. For this reason the particle physics community is now addressing the issue of gold Open Access by converting a set of the existing core journals to Open Access. A Working Party has been established to bring together funding agencies, laboratories and libraries into a single consortium, called SCOAP3 (Sponsoring Consortium for Open Access Publishing in Particle Physics). This consortium will engage with publishers to build a sustainable model for Open Access publishing. In this model, subscription fees from multiple institutions are replaced by contracts with publishers of Open Access journals, where the SCOAP3 conso...

  15. Precision forming machine with rolling plate cross wedge rolling

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    Roller cross wedge rolling(CWR)machines have high rigidity, but sector dies are difficult to process. Plate CWR machines have low rigidity and need large floor space, but plate dies are easy to process. Neither roller CWR machine nor plate CWR machine can produce larger workpieces. Based on the above conclusions, this paper presents the mechanical principle of the precision forming machine with rolling plate CWR. Then, its design principle and machine construction are presented. There are a top press roller above the upper sliding plate and a bottom press roller under the lower sliding plate. The press rollers make rolling contact with the sliding plates. The plate dies are mounted on the upper and lower sliding plates, respectively. Furthermore, the axes of both press rollers and centerline of work-piece always keep in the identical vertical plane during forming process. These make the machine retain advantages of high rigidity for roller CWR machine and simpleness of manufacturing dies for plate CWR machine, and abandon defects of poor rigidity for plate CWR machine and difficulty of manufac-turing dies for roller CWR machine. Moreover, the machine can produce larger workpieces.

  16. Precision forming machine with rolling plate cross wedge rolling

    Institute of Scientific and Technical Information of China (English)

    SONG YuQuan; LI ZhiGang; WANG MingHui; GUAN XiaoFang

    2009-01-01

    Roller cross wedge rolling (CWR) machines have high rigidity, but sector dies are difficult to process.Plate CWR machines have low rigidity and need large floor space, but plate dies are easy to process.Neither roller CWR machine nor plate CWR machine can produce larger workpieces.Based on the above conclusions, this paper presents the mechanical principle of the precision forming machine with rolling plate CWR.Then, its design principle and machine construction are presented.There are a top press roller above the upper sliding plate and a bottom press roller under the lower sliding plate.The press rollers make rolling contact with the sliding plates.The plate dies are mounted on the upper and lower sliding plates, respectively.Furthermore, the axes of both press rollers and centerline of work-piece always keep in the identical vertical plane during forming process.These make the machine re-tain advantages of high rigidity for roller CWR machine and simpleness of manufacturing dies for plate CWR machine, and abandon defects of poor rigidity for plate CWR machine and difficulty of manufac-turing dies for roller CWR machine.Moreover, the machine can produce larger workpieces.

  17. SU-E-T-562: Scanned Percent Depth Dose Curve Discrepancy for Photon Beams with Physical Wedge in Place (Varian IX) Using Different Sensitive Volume Ion Chambers

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, H; Sarkar, V; Rassiah-Szegedi, P; Huang, Y; Szegedi, M; Huang, L; Salter, B [University Utah, Salt Lake City, UT (United States)

    2014-06-01

    Purpose: To investigate and report the discrepancy of scanned percent depth dose (PDD) for photon beams with physical wedge in place when using ion chambers with different sensitive volumes. Methods/Materials: PDD curves of open fields and physical wedged fields (15, 30, 45, and 60 degree wedge) were scanned for photon beams (6MV and 10MV, Varian iX) with field size of 5x5 and 10x10 cm using three common scanning chambers with different sensitive volumes - PTW30013 (0.6cm3), PTW23323 (0.1cm3) and Exradin A16 (0.007cm3). The scanning system software used was OmniPro version 6.2, and the scanning water tank was the Scanditronix Wellhoffer RFA 300.The PDD curves from the three chambers were compared. Results: Scanned PDD curves of the same energy beams for open fields were almost identical between three chambers, but the wedged fields showed non-trivial differences. The largest differences were observed between chamber PTW30013 and Exradin A16. The differences increased as physical wedge angle increased. The differences also increased with depth, and were more pronounced for 6MV beam. Similar patterns were shown for both 5x5 and 10x10 cm field sizes. For open fields, all PDD values agreed with each other within 1% at 10cm depth and within 1.62% at 20 cm depth. For wedged fields, the difference of PDD values between PTW30013 and A16 reached 4.09% at 10cm depth, and 5.97% at 20 cm depth for 6MV with 60 degree physical wedge. Conclusion: We observed a significant difference in scanned PDD curves of photon beams with physical wedge in place obtained when using different sensitive volume ion chambers. The PDD curves scanned with the smallest sensitive volume ion chamber showed significant difference from larger chamber results, beyond 10cm depth. We believe this to be caused by varying response to beam hardening by the wedges.

  18. Transanal opening of intersphincteric space (TROPIS) - A new procedure to treat high complex anal fistula.

    Science.gov (United States)

    Garg, Pankaj

    2017-04-01

    The sepsis in intersphincteric space has important role in pathogenesis of most complex fistula-in-ano. This sepsis is like a small abscess in a closed space. This closed space needs to be drained adequately and then kept open for the fistula-in-ano to heal properly. The aim was to lay open and drain the intersphincteric space through internal opening via transanal approach. This has been tried in submucosal and intersphincteric rectal abscesses but has never been tried in complex fistula-in-ano. All consecutive patients of complex high (involving >1/3 of sphincter complex) fistula-in-ano who were operated were included in the prospective cohort study. Preoperative MRI scan was done in all the patients. Transanal laying open of the intersphincteric space (TROPIS) was done through the internal opening. The external sphincter was not cut. The tracts in the ischiorectal fossa were curetted and cleaned. The incontinence scores were measured. 61 patients with high complex fistula-in-ano were included (follow-up:6-21 months). Male/Female:59/2, age-42.3 ± 9.5 years. 85.2% (52) were recurrent, 83.6% (51) had multiple tracts, 36.1% (22) had horseshoe tract, 34.4% (21) had supralevator extension and 26.2% (16) had associated abscess. 95.1% (58) were posterior fistula out of which 90.2% (55) were in posterior midline. Nine patients were excluded (due to tuberculosis, lost to follow-up). Fistula healed completely in 84.6% (44/52) and didn't heal in 15.4% (9/52). 4/9 of these were reoperated and fistula healed in three patients. Thus overall healing rate was 90.4% (47/52). There was no significant change in incontinence scores. TROPIS is a simple effective sphincter sparing procedure to treat high complex fistula-in-ano including supralevator and horseshoe fistula. Copyright © 2017 IJS Publishing Group Ltd. Published by Elsevier Ltd. All rights reserved.

  19. High Open-Circuit Voltage Solar Cells Based on Organic-Inorganic Lead Bromide Perovskite.

    Science.gov (United States)

    Edri, Eran; Kirmayer, Saar; Cahen, David; Hodes, Gary

    2013-03-21

    Mesoscopic solar cells, based on solution-processed organic-inorganic perovskite absorbers, are a promising avenue for converting solar to electrical energy. We used solution-processed organic-inorganic lead halide perovskite absorbers, in conjunction with organic hole conductors, to form high voltage solar cells. There is a dire need for low-cost cells of this type, to drive electrochemical reactions or as the high photon energy cell in a system with spectral splitting. These perovskite materials, although spin-coated from solution, form highly crystalline materials. Their simple synthesis, along with high chemical versatility, allows tuning their electronic and optical properties. By judicious selection of the perovskite lead halide-based absorber, matching organic hole conductor, and contacts, a cell with a ∼ 1.3 V open circuit voltage was made. While further study is needed, this achievement provides a general guideline for additional improvement of cell performance.

  20. The Cu2ZnSnS4 solar cell with high open circuit voltage

    Science.gov (United States)

    Yang, Min; Ma, Xun; Jiang, Zhi; Li, Zhishan; Liu, Sijia; Lu, Yilei; Wang, Shurong

    2017-03-01

    In this paper, the effects of two different sulfurization processes on the CZTS films were investigated, and the results indicated that a rapid high-temperature crystallization process after sulfurization was beneficial for CZTS thin films to obtain a compact and flat surface with large grains. However, a common sulfurization without rapid high-temperature crystallization process would easily lead to undesirable properties of films, such as rough surface with pin holes, which degenerate the performance of devices. Cu2ZnSnS4 (CZTS) solar cell based on a rapid high-temperature process after sulfurization achieved a high open circuit voltage of 722 mV and the best efficiency 3.32% was obtained.

  1. A Numerical Study on the Asymmetric Water Entry of A Wedge Section

    Institute of Scientific and Technical Information of China (English)

    M. S. Seif; S. M. Mousaviraad; S. H. Saddathosseini

    2004-01-01

    The effect of the asymmetric water entry over a submerged part of a ship on the hydrodynamic impact is investigated numerically. A wedge body is considered and the problem is assumed to be two-dimensional. The results of symmetric and asymmetric impacts are compared. The effect is found significant in the numerical simulation. The maximum hydrodynamic pressure at a heel angle of 10 degrees becomes about 95% more than that of the symmetric entry. The result of the present work proves the importance of asymmetrical hydrodynamic impact loading for structural design of a ship. Besides, the numerical procedure is not limited to a wedge type cross section and it is possible to apply it for any real geometry of ships and high-speed craft.

  2. Plasmonic angular momentum on metal-dielectric nano-wedges in a sectorial indefinite metamaterial

    CERN Document Server

    Jin, Dafei

    2013-01-01

    We present an analytical study to the structure-modulated plasmonic angular momentum trapped on periodic metal-dielectric nano-wedges in the core region of a sectorial indefinite metamaterial. Employing a transfer-matrix calculation and a conformal-mapping technique, our theory is capable of dealing with realistic configurations of arbitrary sector numbers and rounded wedge tips. We demonstrate that in the deep-subwavelength regime strong electric field carrying high azimuthal variation can exist within only ten-nanometer length scale close to the structural center, and is naturally bounded by a characteristic radius of the order of hundred-nanometer away from the center. These extreme confining properties suggest that the structure under investigation may be superior to the conventional metal-dielectric waveguides or cavities in terms of nanoscale photonic manipulation.

  3. Effect of ultrasonic power on wedge bonding strength and interface microstructure

    Institute of Scientific and Technical Information of China (English)

    WANG Fu-liang; LI Jun-hui; HAN Lei; ZHONG Jue

    2007-01-01

    During the aluminum wire wedge bonding, the ultrasonic power and bonding strength were obtained. Based on those data, the relationship between ultrasonic power and bonding strength was studied. The results show that: 1) ultrasonic power is affected by ultrasonic power ratio and other uncontrolled factors such as asymmetric substrate quality, unstable restriction on the interface between wedge tool and aluminum wire; 2) when ultrasonic power is less than 1.0 W, increasing ultrasonic power leads to increasing bonding strength and decreasing failure bonding; on the contrary, when ultrasonic power is greater than 1.6 W, increasing power leads to decreasing bonding strength and increasing failure bonding; 3) only when ultrasonic power is between 1.0 W and 1.6 W, can stable and high yield bonding be reached. Finally, the microstructure of bonding interface was observed, and a ring-shaped bond pattern is founded in the center and friction scrape besides the ring area.

  4. Analytic Study of Magnetohydrodynamic Flow and Boundary Layer Control Over a Wedge

    Institute of Scientific and Technical Information of China (English)

    M. Chandrasekar; S. Baskaran

    2008-01-01

    A genuine variational principle developed by Gyarmati, in the field of thermodynamics of irreversible processes unifying the theoretical requirements of technical, environmental and biological sciences is employed to study the effects of uniform suction and injection on MHD flow adjacent to an isothermal wedge with pressure gradient in the presence of a transverse magnetic field. The velocity distribution inside the boundary layer has been considered as a simple polynomial function and the variational principle is formulated. The Euler-Lagrange equation is reduced to a simple polynomial equation in terms of momentum boundary layer thickness. The velocity profiles, displacement thickness and the coefficient of skin friction are calculated for various values of wedge angle parameter m, magnetic parameter ε and suction/injection parameter H. The present results are compared with known available results and the comparison is found to be satisfactory. The present study establishes high accuracy of results obtained by this variational technique.

  5. On the Effect of Structural Response on the Hydrodynamic Loading of a Free-Falling Wedge

    Science.gov (United States)

    Ikeda, Christine; Taravella, Brandon; Judge, Carolyn

    2016-11-01

    High-speed planing craft are subjected to repeated slamming events in waves that can be very extreme depending on the wave topography, impact angle of the ship, forward speed of the ship, encounter angle, and height out of the water. The current work examines this fluid-structure interaction problem through the use of wedge drop experiments and a theoretical prediction. The experimental program consisted of two 20° deadrise angle wedges dropped from a range of heights, 0 . 15 code assumes a rigid structure, therefore, the results between the code and the first experiment are in good agreement. The second experiment shows pressure magnitudes that are lower than the predictions due to the energy required to deform the structure. This work is funded by the Office of Naval Research and the state of Louisiana Board of Regents Industrial Ties and Reseach Subprogram.

  6. Numerical simulation of flow around a simplified high-speed train model using OpenFOAM

    Science.gov (United States)

    Ishak, I. A.; Ali, M. S. M.; Shaikh Salim, S. A. Z.

    2016-10-01

    Detailed understanding of flow physics on the flow over a high-speed train (HST) can be accomplished using the vast information obtained from numerical simulation. Accuracy of any simulation in solving and analyzing problems related to fluid flow is important since it measures the reliability of the results. This paper describes a numerical simulation setup for the flow around a simplified model of HST that utilized open source software, OpenFOAM. The simulation results including pressure coefficient, drag coefficient and flow visualization are presented and they agreed well with previously published data. This shows that OpenFOAM software is capable of simulating fluid flows around a simplified HST model. Additionally, the wall functions are implemented in order to minimize the overall number of grid especially near the wall region. This resulted in considerably smaller numbers of mesh resolution used in the current study compared to previous work, which leads to achievement of much reasonable time simulation and consequently reduces the total computational effort without affecting the final outcome.

  7. Open Source High Content Analysis Utilizing Automated Fluorescence Lifetime Imaging Microscopy.

    Science.gov (United States)

    Görlitz, Frederik; Kelly, Douglas J; Warren, Sean C; Alibhai, Dominic; West, Lucien; Kumar, Sunil; Alexandrov, Yuriy; Munro, Ian; Garcia, Edwin; McGinty, James; Talbot, Clifford; Serwa, Remigiusz A; Thinon, Emmanuelle; da Paola, Vincenzo; Murray, Edward J; Stuhmeier, Frank; Neil, Mark A A; Tate, Edward W; Dunsby, Christopher; French, Paul M W

    2017-01-18

    We present an open source high content analysis instrument utilizing automated fluorescence lifetime imaging (FLIM) for assaying protein interactions using Förster resonance energy transfer (FRET) based readouts of fixed or live cells in multiwell plates. This provides a means to screen for cell signaling processes read out using intramolecular FRET biosensors or intermolecular FRET of protein interactions such as oligomerization or heterodimerization, which can be used to identify binding partners. We describe here the functionality of this automated multiwell plate FLIM instrumentation and present exemplar data from our studies of HIV Gag protein oligomerization and a time course of a FRET biosensor in live cells. A detailed description of the practical implementation is then provided with reference to a list of hardware components and a description of the open source data acquisition software written in µManager. The application of FLIMfit, an open source MATLAB-based client for the OMERO platform, to analyze arrays of multiwell plate FLIM data is also presented. The protocols for imaging fixed and live cells are outlined and a demonstration of an automated multiwell plate FLIM experiment using cells expressing fluorescent protein-based FRET constructs is presented. This is complemented by a walk-through of the data analysis for this specific FLIM FRET data set.

  8. Finite Element Analysis of Dam-Reservoir Interaction Using High-Order Doubly Asymptotic Open Boundary

    Directory of Open Access Journals (Sweden)

    Yichao Gao

    2011-01-01

    Full Text Available The dam-reservoir system is divided into the near field modeled by the finite element method, and the far field modeled by the excellent high-order doubly asymptotic open boundary (DAOB. Direct and partitioned coupled methods are developed for the analysis of dam-reservoir system. In the direct coupled method, a symmetric monolithic governing equation is formulated by incorporating the DAOB with the finite element equation and solved using the standard time-integration methods. In contrast, the near-field finite element equation and the far-field DAOB condition are separately solved in the partitioned coupled methodm, and coupling is achieved by applying the interaction force on the truncated boundary. To improve its numerical stability and accuracy, an iteration strategy is employed to obtain the solution of each step. Both coupled methods are implemented on the open-source finite element code OpenSees. Numerical examples are employed to demonstrate the performance of these two proposed methods.

  9. The evolving energy budget of accretionary wedges

    Science.gov (United States)

    McBeck, Jessica; Cooke, Michele; Maillot, Bertrand; Souloumiac, Pauline

    2017-04-01

    The energy budget of evolving accretionary systems reveals how deformational processes partition energy as faults slip, topography uplifts, and layer-parallel shortening produces distributed off-fault deformation. The energy budget provides a quantitative framework for evaluating the energetic contribution or consumption of diverse deformation mechanisms. We investigate energy partitioning in evolving accretionary prisms by synthesizing data from physical sand accretion experiments and numerical accretion simulations. We incorporate incremental strain fields and cumulative force measurements from two suites of experiments to design numerical simulations that represent accretionary wedges with stronger and weaker detachment faults. One suite of the physical experiments includes a basal glass bead layer and the other does not. Two physical experiments within each suite implement different boundary conditions (stable base versus moving base configuration). Synthesizing observations from the differing base configurations reduces the influence of sidewall friction because the force vector produced by sidewall friction points in opposite directions depending on whether the base is fixed or moving. With the numerical simulations, we calculate the energy budget at two stages of accretion: at the maximum force preceding the development of the first thrust pair, and at the minimum force following the development of the pair. To identify the appropriate combination of material and fault properties to apply in the simulations, we systematically vary the Young's modulus and the fault static and dynamic friction coefficients in numerical accretion simulations, and identify the set of parameters that minimizes the misfit between the normal force measured on the physical backwall and the numerically simulated force. Following this derivation of the appropriate material and fault properties, we calculate the components of the work budget in the numerical simulations and in the

  10. Computational analysis of asymmetric water entry of wedge and ship section at constant velocity

    Science.gov (United States)

    Rahaman, Md. Mashiur; Ullah, Al Habib; Afroz, Laboni; Shabnam, Sharmin; Sarkar, M. A. Rashid

    2016-07-01

    Water impact problems receive much attention due to their short duration and large unsteady component of hydrodynamic loads. The effect of water entry has several important applications in various aspects of the naval field. Significant attention has been given to various water entry phenomena such as ship slamming, planning hulls, high-speed hydrodynamics of seaplanes, surface-piercing propellers and the interaction of high-speed liquid drops with structural elements. Asymmetric water entry may be caused by various natural phenomena such as weather conditions or strong winds. Since the determination of hydrodynamic impact load plays a vital role in designing safe and effcient vessels, an accurate and reliable prediction method is necessary to investigate asymmetric water entry problems. In this paper, water entry of a two-dimensional wedge and ship section at constant velocity in asymmetric condition will be analysed numerically and the effects of asymmetric impact on the velocity and pressure distribution will be discussed. The finite volume method is employed to solve the dynamic motion of the wedge in two-phase flow. During the water entry, the air and water interface is described implicitly by the volume of fluid (VOF) scheme. The numerical code and method was first validated for symmetric condition by one of the present author is applied for asymmetric wedge and ship section. The free surface, velocity and pressure distribution for asymmetric water entry are investigated and visualized with contour plots at different time steps.

  11. Facilitating the openEHR approach - organizational structures for defining high-quality archetypes.

    Science.gov (United States)

    Kohl, Christian Dominik; Garde, Sebastian; Knaup, Petra

    2008-01-01

    Using openEHR archetypes to establish an electronic patient record promises rapid development and system interoperability by using or adopting existing archetypes. However, internationally accepted, high quality archetypes which enable a comprehensive semantic interoperability require adequate development and maintenance processes. Therefore, structures have to be created involving different health professions. In the following we present a model which facilitates and governs distributed but cooperative development and adoption of archetypes by different professionals including peer reviews. Our model consists of a hierarchical structure of professional committees and descriptions of the archetype development process considering these different committees.

  12. Implementation of enhanced dynamic wedge in the focus rtp system.

    Science.gov (United States)

    Miften, M; Wiesmeyer, M; Beavis, A; Takahashi, K; Broad, S

    2000-01-01

    The FOCUS RTP system implementation of Varian's enhanced dynamic wedge (EDW) is presented. Calculations of both dose distributions and wedge factors (WFs) are based on segmented treatment tables (STTs). Calculating dose requires a "transmission matrix" derived from an STT to model the modified fluence from the source. The dose calculation is then performed using either the Clarkson or convolution/superposition algorithms. An initial "primary dose/monitor unit (MU) fraction" WF estimate at the weight point of symmetric and asymmetric fields is calculated from the STT as the ratio of MU delivered on the axis of the weight point divided by total MU delivered for the treatment field. In our approach, we go beyond this initial estimate with a "scatter dose" correction. This requires measured 60 degrees WFs for 5 fields. Scatter corrections derived from measured WFs are interpolated for other wedge angles and field sizes in much the same way as arbitrary wedge angle STTs are derived from a "golden STT" using the "ratio of tangents" formalism. Dose comparisons with measured distributions show good agreement to within 3% or 3 mm for 6-MV beams and all EDW angles. Agreement with measurements to within 1% is obtained for WFs in all symmetric and asymmetric fields for 6- and 10-MV beams. For large wedge angles and field sizes, this represents a significant improvement over the 3% to 4% errors often observed using the MU fraction model alone.

  13. EXPERIMENTAL INVESTIGATION ON SOUND SPEED PROPAGATING THROUGH HIGH SPEED AERATED FLOW IN OPEN CHANNEL

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    An experiment concerning the sound propaga-tion in aerated open channel flow was designed and conductedin a variable slope chute. The acquisition of sound data wasdone by the hydro-phones installed into the bottom wall of thechute. The data were analyzed and processed by the tape re-corder and a 3562A analyzer. The primary experimetal resultsindicated that the sound speed in aerated flow is varied with the air concentration and highly lower than each of the soundspeed in pure water or air. As released by the derived theoryformula, the minimum sound of 24m/s in aerated flow hap-pened when the air concentration achieved to 50%. This resultshows that the compressibility of high speed aerated flowshould be considered when the air concentration is near to50%. A criterion of compressibility of high speed aerated flowwas also giv. En in this paper.

  14. High-throughput metagenomic technologies for complex microbial community analysis: open and closed formats.

    Science.gov (United States)

    Zhou, Jizhong; He, Zhili; Yang, Yunfeng; Deng, Ye; Tringe, Susannah G; Alvarez-Cohen, Lisa

    2015-01-27

    Understanding the structure, functions, activities and dynamics of microbial communities in natural environments is one of the grand challenges of 21st century science. To address this challenge, over the past decade, numerous technologies have been developed for interrogating microbial communities, of which some are amenable to exploratory work (e.g., high-throughput sequencing and phenotypic screening) and others depend on reference genes or genomes (e.g., phylogenetic and functional gene arrays). Here, we provide a critical review and synthesis of the most commonly applied "open-format" and "closed-format" detection technologies. We discuss their characteristics, advantages, and disadvantages within the context of environmental applications and focus on analysis of complex microbial systems, such as those in soils, in which diversity is high and reference genomes are few. In addition, we discuss crucial issues and considerations associated with applying complementary high-throughput molecular technologies to address important ecological questions.

  15. Electromagnetic Response of High-Frequency Gravitational Waves by Coupling Open Resonant Cavity

    Institute of Scientific and Technical Information of China (English)

    LI Fang-Yu; CHEN Ying; WANG Ping

    2007-01-01

    We present a new detecting scheme of high-frequency gravitational waves(HFGWs) in the GHz band,the scheme consists of a high-quality-factor open microwave cavity,a static magnetic field passing through the cavity and an electromagnetic (EM)normal mode stored in the cavity.It is found that under the resonant condition firstand second-order perturbation EM effects have almost the same detecting sensitivity to the HFGWs in the GHz band (h~10-26,v~5GHz),but the former contains more information from the HFGWs.We akso provide a very brief review for possible improving way of the sensitivity.This scheme would be Highly complementary to other schemes of detecting the HFGWs.

  16. GROMACS 4.5: A high-throughput and highly parallel open source molecular simulation toolkit

    Energy Technology Data Exchange (ETDEWEB)

    Pronk, Sander [Science for Life Lab., Stockholm (Sweden); KTH Royal Institute of Technology, Stockholm (Sweden); Pall, Szilard [Science for Life Lab., Stockholm (Sweden); KTH Royal Institute of Technology, Stockholm (Sweden); Schulz, Roland [Univ. of Tennessee, Knoxville, TN (United States); Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Larsson, Per [Univ. of Virginia, Charlottesville, VA (United States); Bjelkmar, Par [Science for Life Lab., Stockholm (Sweden); Stockholm Univ., Stockholm (Sweden); Apostolov, Rossen [Science for Life Lab., Stockholm (Sweden); KTH Royal Institute of Technology, Stockholm (Sweden); Shirts, Michael R. [Univ. of Virginia, Charlottesville, VA (United States); Smith, Jeremy C. [Univ. of Tennessee, Knoxville, TN (United States); Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Kasson, Peter M. [Univ. of Virginia, Charlottesville, VA (United States); van der Spoel, David [Science for Life Lab., Stockholm (Sweden); Uppsala Univ., Uppsala (Sweden); Hess, Berk [Science for Life Lab., Stockholm (Sweden); KTH Royal Institute of Technology, Stockholm (Sweden); Lindahl, Erik [Science for Life Lab., Stockholm (Sweden); KTH Royal Institute of Technology, Stockholm (Sweden); Stockholm Univ., Stockholm (Sweden)

    2013-02-13

    In this study, molecular simulation has historically been a low-throughput technique, but faster computers and increasing amounts of genomic and structural data are changing this by enabling large-scale automated simulation of, for instance, many conformers or mutants of biomolecules with or without a range of ligands. At the same time, advances in performance and scaling now make it possible to model complex biomolecular interaction and function in a manner directly testable by experiment. These applications share a need for fast and efficient software that can be deployed on massive scale in clusters, web servers, distributed computing or cloud resources. As a result, we present a range of new simulation algorithms and features developed during the past 4 years, leading up to the GROMACS 4.5 software package. The software now automatically handles wide classes of biomolecules, such as proteins, nucleic acids and lipids, and comes with all commonly used force fields for these molecules built-in. GROMACS supports several implicit solvent models, as well as new free-energy algorithms, and the software now uses multithreading for efficient parallelization even on low-end systems, including windows-based workstations. Together with hand-tuned assembly kernels and state-of-the-art parallelization, this provides extremely high performance and cost efficiency for high-throughput as well as massively parallel simulations.

  17. High school students' enactment of chemistry knowing in open-entry laboratory investigations

    Science.gov (United States)

    Pilane, Sentsetsa M.

    2003-10-01

    This study is an exploration of student meaning making in a non-traditional, high activity, hands-on grade 12 high school chemistry setting. The study focused on a sequence of three "open-entry" laboratory investigations (i.e., iodine clock reaction, pop-can cell and electroplating). These open-entry laboratory investigations were designed to be flexible and to take place in settings where students could make an impact. Students were responsible for devising their own problem and entry strategy, for making decisions about what reagents to use, what variables to manipulate, and how to proceed to develop the problem to a resolution acceptable to them and to the teacher. To explore students' meaning making in open-entry laboratory settings, their interactions were video taped and samples of their written laboratory reports were collected from time to time. Students were also requested to write reflective notes on their experiences of each investigation, some students were interviewed at the end of the course. This thesis consists of accounts and interpretations of what students did and said as they made meaning in these open-entry, hands-on laboratory investigations. The research uses an enactivist perspective to explore the meanings emerging from the study. From an enactivist view, cognition is seen as perceptually guided action in which a knower brings forth a world of significance with others. Enactivism suggests that students do not only express their knowing in what they say or write but also in their actions with others within this learning community. The research revealed that meaning making in these circumstances was highly complex. It involved systematic trial and error at various levels within the multiple iterative feedback loops. Students' interactions in this setting were mediated by the culture of chemistry which is embodied in the practices of the discipline. With students having to make decisions with every action, their meaning making was not only

  18. Uncertainty of soil erosion modelling using open source high resolution and aggregated DEMs

    Directory of Open Access Journals (Sweden)

    Arun Mondal

    2017-05-01

    Full Text Available Digital Elevation Model (DEM is one of the important parameters for soil erosion assessment. Notable uncertainties are observed in this study while using three high resolution open source DEMs. The Revised Universal Soil Loss Equation (RUSLE model has been applied to analysis the assessment of soil erosion uncertainty using open source DEMs (SRTM, ASTER and CARTOSAT and their increasing grid space (pixel size from the actual. The study area is a part of the Narmada river basin in Madhya Pradesh state, which is located in the central part of India and the area covered 20,558 km2. The actual resolution of DEMs is 30 m and their increasing grid spaces are taken as 90, 150, 210, 270 and 330 m for this study. Vertical accuracy of DEMs has been assessed using actual heights of the sample points that have been taken considering planimetric survey based map (toposheet. Elevations of DEMs are converted to the same vertical datum from WGS 84 to MSL (Mean Sea Level, before the accuracy assessment and modelling. Results indicate that the accuracy of the SRTM DEM with the RMSE of 13.31, 14.51, and 18.19 m in 30, 150 and 330 m resolution respectively, is better than the ASTER and the CARTOSAT DEMs. When the grid space of the DEMs increases, the accuracy of the elevation and calculated soil erosion decreases. This study presents a potential uncertainty introduced by open source high resolution DEMs in the accuracy of the soil erosion assessment models. The research provides an analysis of errors in selecting DEMs using the original and increased grid space for soil erosion modelling.

  19. Tetanus with multiple wedge vertebral collapses

    African Journals Online (AJOL)

    owner

    2012-07-06

    Jul 6, 2012 ... plication of paediatric tetanus and the associated ... of back pains-11 days, inability to open her mouth- 9 days, ... multiple vertebral collapses and the management chal- ... symptoms made the parents take her to a prayer house where the .... overlying the affected vertebrae, low-grade fever, chills,. Multiple.

  20. Falcon: a highly flexible open-source software for closed-loop neuroscience

    Science.gov (United States)

    Ciliberti, Davide; Kloosterman, Fabian

    2017-08-01

    Objective. Closed-loop experiments provide unique insights into brain dynamics and function. To facilitate a wide range of closed-loop experiments, we created an open-source software platform that enables high-performance real-time processing of streaming experimental data. Approach. We wrote Falcon, a C++ multi-threaded software in which the user can load and execute an arbitrary processing graph. Each node of a Falcon graph is mapped to a single thread and nodes communicate with each other through thread-safe buffers. The framework allows for easy implementation of new processing nodes and data types. Falcon was tested both on a 32-core and a 4-core workstation. Streaming data was read from either a commercial acquisition system (Neuralynx) or the open-source Open Ephys hardware, while closed-loop TTL pulses were generated with a USB module for digital output. We characterized the round-trip latency of our Falcon-based closed-loop system, as well as the specific latency contribution of the software architecture, by testing processing graphs with up to 32 parallel pipelines and eight serial stages. We finally deployed Falcon in a task of real-time detection of population bursts recorded live from the hippocampus of a freely moving rat. Main results. On Neuralynx hardware, round-trip latency was well below 1 ms and stable for at least 1 h, while on Open Ephys hardware latencies were below 15 ms. The latency contribution of the software was below 0.5 ms. Round-trip and software latencies were similar on both 32- and 4-core workstations. Falcon was used successfully to detect population bursts online with ~40 ms average latency. Significance. Falcon is a novel open-source software for closed-loop neuroscience. It has sub-millisecond intrinsic latency and gives the experimenter direct control of CPU resources. We envisage Falcon to be a useful tool to the neuroscientific community for implementing a wide variety of closed-loop experiments, including those

  1. Falcon: a highly flexible open-source software for closed-loop neuroscience.

    Science.gov (United States)

    Ciliberti, Davide; Kloosterman, Fabian

    2017-05-26

    Closed-loop experiments provide unique insights into brain dynamics and function. To facilitate a wide range of closed-loop experiments, we created an open-source software platform that enables high-performance real-time processing of streaming experimental data. We wrote Falcon, a C++ multi-threaded software in which the user can load and execute an arbitrary processing graph. Each node of a Falcon graph is mapped to a single thread and nodes communicate with each other through thread-safe buffers. The framework allows for easy implementation of new processing nodes and data types. Falcon was tested both on a 32-core and a 4-core workstation. Streaming data was read from either a commercial acquisition system (Neuralynx) or the open-source Open Ephys hardware, while closed-loop TTL pulses were generated with a USB module for digital output. We characterized the round-trip latency of our Falcon-based closed-loop system, as well as the specific latency contribution of the software architecture, by testing processing graphs with up to 32 parallel pipelines and eight serial stages. We finally deployed Falcon in a task of real-time detection of population bursts recorded live from the hippocampus of a freely moving rat. On Neuralynx hardware, round-trip latency was well below 1 ms and stable for at least 1 h, while on Open Ephys hardware latencies were below 15 ms. The latency contribution of the software was below 0.5 ms. Round-trip and software latencies were similar on both 32- and 4-core workstations. Falcon was used successfully to detect population bursts online with ~40 ms average latency. Falcon is a novel open-source software for closed-loop neuroscience. It has sub-millisecond intrinsic latency and gives the experimenter direct control of CPU resources. We envisage Falcon to be a useful tool to the neuroscientific community for implementing a wide variety of closed-loop experiments, including those requiring use of complex data structures and real

  2. Exploring Differences between Self-Regulated Learning Strategies of High and Low Achievers in Open Distance Learning

    Science.gov (United States)

    Geduld, Bernadette

    2016-01-01

    Open distance students differ in their preparedness for higher education studies. Students who are less self-regulated risk failure and drop out in the challenging milieu of open distance learning. In this study, the differences between the application of self-regulated learning strategies by low and high achievers were explored. A multi-method…

  3. The link between organisational citizenship behaviours and open innovation: A case of Malaysian high-tech sector

    Directory of Open Access Journals (Sweden)

    M. Muzamil Naqshbandi

    2016-12-01

    Full Text Available We examine the role of organisational citizenship behaviours (OCBs in two types of open innovation—inbound and outbound. Data were collected using the questionnaire survey technique from middle and top managers working in high-tech industries in Malaysia. Results show that OCBs positively predict both inbound and outbound open innovation. A closer look reveals that OCBs relate positively to out-bound open innovation in aggregate and in isolation. However, OCBs relate to in-bound open innovation in aggregate only. The implications of these results are discussed and limitations of the study are highlighted.

  4. Partial wedge resection of nail, nail bed and nail matrix in ingrown toenail treatment

    Directory of Open Access Journals (Sweden)

    Mustafa Dönmez

    2010-05-01

    Full Text Available Objectives: Ingrown toenail is a frequent problem which can be seen in all ages. There are many treatment methods both surgical and nonsurgical. In this study we evaluated the results of wedge resection of ingrown toe nail.Patients and Methods: A total of 80 toenails of 74 patients (55 female, 19 male who complaint with discharge and deformity of their toenail underwent partial wedge resection of the nail and nail matrix. According to the Heifetz’s staging system, 34 toenails were grade II, 46 toenails were grade III. There was active drainage due to an infectious process in all effected toe nails. All patients were operated after 10 day of oral antibiotic treatment. We evaluated the recurrence, postoperative infection, patient satisfaction and time to return to work.Results: The mean follow up period was 8 months (4-12 months. There was no recurrence in any patient. Two patients came with wound drainage in postoperative 14th day. Intravenous antibiotic treatment, debridement and wound dressing with rifampicine every other day were accomplished. All patients expressed their satisfaction with surgery.Conclusion: In treatment of ingrown toenail; wedge resection of nail, nail matrix and nail bed is a very effective treatment. Recurrence rate following this technique is negligible if it is done properly and it has high patient satisfaction.

  5. Extension of a double-wedged orogen potentially leads to the current South China Sea

    Science.gov (United States)

    Wu, G.; Lavier, L. L.

    2015-12-01

    The South China Sea (SCS) is surrounded by South China on the NW, Palawan and Reed Bank on the SE, as well as several microplates, resembling a jigsaw puzzle. In an attempt to better understand its evolution, we designed simplified thermomechanical models to simulate extension of a double-wedge-shaped orogen with highlands on both sides and lowland in the center to mimic the geological condition of the proto-SCS. We imposed constant extension rates on both sides and Gaussian-shaped thermal impulse in the center. We also varied the strength of lower crust but did not explicitly incorporate mid-ocean ridges and searfloor spreading mechanisms. We currently used symmetric double-wedge, but further tests are planed for asymmetric double-wedges. Our preliminary results show that the models produced many structures that resemble those of SCS, such as 1) a series of domino or conjugate faults sitting above a subsurface detachment (or décollement), 2) exhumed domes of middle-lower crust, 3) extreme thinning of both upper crust and lower crust, and 4) propagation of extension towards NW and SE margins. Our models suggest that superimposition of these modeled characteristics produced during several phases of extension of the SCS that may be due to thermal impulsion, magmatic events, and subduction related relaxation potentially produces high resemblance of the SCS.

  6. CFD Simulations of the IHF Arc-Jet Flow: Compression-Pad/Separation Bolt Wedge Tests

    Science.gov (United States)

    Gokcen, Tahir; Skokova, Kristina A.

    2017-01-01

    This paper reports computational analyses in support of two wedge tests in a high enthalpy arc-jet facility at NASA Ames Research Center. These tests were conducted using two different wedge models, each placed in a free jet downstream of a corresponding different conical nozzle in the Ames 60-MW Interaction Heating Facility. Panel test articles included a metallic separation bolt imbedded in the compression-pad and heat shield materials, resulting in a circular protuberance over a flat plate. As part of the test calibration runs, surface pressure and heat flux measurements on water-cooled calibration plates integrated with the wedge models were also obtained. Surface heating distributions on the test articles as well as arc-jet test environment parameters for each test configuration are obtained through computational fluid dynamics simulations, consistent with the facility and calibration measurements. The present analysis comprises simulations of the non-equilibrium flow field in the facility nozzle, test box, and flow field over test articles, and comparisons with the measured calibration data.

  7. Dislocation Nucleation and Pileup under a Wedge Contact at Nanoscale

    Directory of Open Access Journals (Sweden)

    Y. F. Gao

    2008-01-01

    Full Text Available Indentation responses of crystalline materials have been found to be radically different at micrometer and nanometer scales. The latter is usually thought to be controlled by the nucleation of dislocations. To explore this physical process, a dislocation mechanics study is performed to determine the conditions for the nucleation of a finite number of dislocations under a two-dimensional wedge indenter, using the Rice-Thomson nucleation criterion. The configurational force on the dislocation consists of the applied force, the image force, and the interaction force between dislocations. Dislocations reach equilibrium positions when the total driving force equals the effective Peierls stress, giving a set of nonlinear equations that can be solved using the Newton-Raphson method. When the apex angle of the wedge indenter increases, the critical contact size for dislocation nucleation increases rapidly, indicating that dislocation multiplication near a blunt wedge tip is extremely difficult. This geometric dependence agrees well with experimental findings.

  8. Indentation tectonics in the accretionary wedge of middle Manila Trench

    Institute of Scientific and Technical Information of China (English)

    LI Jiabiao; JIN Xianglong; RUAN Aiguo; WU Shimin; WU Ziyin; LIU Jianhua

    2004-01-01

    Based on the multibeam morpho-tectonic analysis of the Manila Trench accretionary wedge and its indentation tectonics and the contrasting researches with other geological and geophysical data, three tectonic zones of the wedge are established, faulting features, tectonic distribution and stress mechanism for the indentation tectonicsareanalyzed,oblique subduction along Manila Trench with convergent stress of NW55. Is presented, and the relationship of the ceasing of Eastern Subbasin spreading of South China Sea Basin to the formation of subduction zone of Manila Trench is discussed. By the model analysis and regional research, it is found that the seamount subduction along Manila Trenchoes not lead to the erosion of the accretionary wedge and the oblique subduction actually is a NWWtrending obducfion of Luzon micro-plate that results from the NWW-trending displacement of the Philippine Sea plate.

  9. Surface Geophysical Measurements for Locating and Mapping Ice-Wedges

    DEFF Research Database (Denmark)

    Ingeman-Nielsen, Thomas; Tomaskovicova, Sonia; Larsen, S.H.

    2012-01-01

    With the presently observed trend of permafrost warming and degradation, the development and availability of effective tools to locate and map ice-rich soils and massive ground ice is of increasing importance. This paper presents a geophysical study of an area with polygonal landforms in order...... to test the applicability of DC electrical resistivity tomography (ERT) and Ground Penetrating Radar (GPR) to identifying and mapping ice-wedge occurrences. The site is located in Central West Greenland, and the ice-wedges are found in a permafrozen peat soil with an active layer of about 30 cm. ERT...... and GPR measurements give a coherent interpretation of possible ice-wedge locations, and active layer probing show a tendency for larger thaw depth in the major trench systems consistent with a significant temperature (at 10 cm depth) increase in these trenches identified by thermal profiling. Three...

  10. Modeling and Stability Analysis of Wedge Clutch System

    Directory of Open Access Journals (Sweden)

    Jian Yao

    2014-01-01

    Full Text Available A wedge clutch with unique features of self-reinforcement and small actuation force was designed. Its self-reinforcement feature, associated with different factors such as the wedge angle and friction coefficient, brings different dynamics and unstable problem with improper parameters. To analyze this system, a complete mathematical model of the actuation system is built, which includes the DC motor, the wedge mechanism, and the actuated clutch pack. By considering several nonlinear factors, such as the slip-stick friction and the contact or not of the clutch plates, the system is piecewise linear. Through the stability analysis of the linearized system in clutch slipping phase, the stable condition of the designed parameters is obtained as α>arctan⁡(μc. The mathematical model of the actuation system is validated by prototype testing. And with the validated model, the system dynamics in both stable and unstable conditions is investigated and discussed in engineering side.

  11. Tricritical wedge filling transitions with short-ranged forces

    Energy Technology Data Exchange (ETDEWEB)

    Romero-Enrique, J M [Departamento de Fisica Atomica, Molecular y Nuclear, Area de Fisica Teorica, Universidad de Sevilla, Apartado de Correos 1065, 41080 Sevilla (Spain); Parry, A O [Department of Mathematics, Imperial College 180 Queen' s Gate, London SW7 2BZ (United Kingdom)

    2005-11-16

    We show that the 3D wedge filling transition in the presence of short-ranged interactions can be first order or second order depending on the strength of the line tension associated with the wedge bottom. This fact implies the existence of a tricritical point characterized by a short-distance expansion which differs from the usual continuous filling transition. Our analysis is based on an effective one-dimensional model for the 3D wedge filling, which arises from the identification of the breather modes as the only relevant interfacial fluctuations. From such analysis we find a correspondence between continuous 3D filling at bulk coexistence and 2D wetting transitions with random-bond disorder.

  12. High-throughput syntheses of iron phosphite open frameworks in ionic liquids

    Science.gov (United States)

    Wang, Zhixiu; Mu, Ying; Wang, Yilin; Bing, Qiming; Su, Tan; Liu, Jingyao

    2017-02-01

    Three open-framework iron phosphites: Feп5(NH4)2(HPO3)6 (1), Feп2Fe♯(NH4)(HPO3)4 (2) and Fe♯2(HPO3)3 (3) have been synthesized under ionothermal conditions. How the different synthesis parameters, such as the gel concentrations, synthetic times, reaction temperatures and solvents affect the products have been monitored by using high-throughput approaches. Within each type of experiment, relevant products have been investigated. The optimal reaction conditions are obtained from a series of experiments by high-throughput approaches. All the structures are determined by single-crystal X-ray diffraction analysis and further characterized by PXRD, TGA and FTIR analyses. Magnetic study reveals that those three compounds show interesting magnetic behavior at low temperature.

  13. Status of {open_quotes}Nirvana{close_quotes}: High quality GUI based software for HEP

    Energy Technology Data Exchange (ETDEWEB)

    Edel, M.; Kryiakopulos, J.; Lebrun, P.; Kallenbach, J.; Ravoor, S. [Fermi National Accelerator Lab., Batavia, IL (United States); Iourcha, K. [Petersburg Nuclear Physics Institute, Gatchina (Russian Federation)

    1994-12-31

    The Fermilab {open_quotes}Nirvana{close_quotes} project has produced a number of tools for data analysis in High Energy Physics. The authors goal has been to produce software which takes maximum advantage of the workstation graphical user interface. Histo-Scope and NPlot enable users to browse data from running programs and HBOOK, Histo-Scope, and columnar text files. They also provide highly interactive two and three dimensional plots which can be rotated, scaled and adjusted directly with the workstation mouse. The newest program, NFit, a GUI version of the MINUIT fitting program, will be ready in a few months. In addition, NEdit, the programmer`s text editor, was released as public domain in December. The authors discuss the basics of these software products, as well as improvements in the newest versions of Histo-Scope, NPlot, and NEdit.

  14. Heat management in a portable high temperature PEM fuel cell module with open cathode

    Energy Technology Data Exchange (ETDEWEB)

    Kurz, T.; Keller, J. [Fraunhofer Institute for Solar Energy Systems, Freiburg (Germany)

    2011-08-15

    The development and characterisation of a portable high temperature PEM fuel cell module is presented. The module consists of a 5-cell stack with open cathodes and coil compression. This design enables the operation and control with only one fan and compact and lightweight packaging. The stack is characterised with polarisation curves and single cell impedance spectroscopy. Temperature distribution in the stack and temperature control is analysed during startup and operation. The results show very similar cell characteristics and stable operation with high power density. Temperature control shows a good reaction on load changes as well as on setpoint changes. (Copyright copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  15. kspectrum: an open-source code for high-resolution molecular absorption spectra production

    Science.gov (United States)

    Eymet, V.; Coustet, C.; Piaud, B.

    2016-01-01

    We present the kspectrum, scientific code that produces high-resolution synthetic absorption spectra from public molecular transition parameters databases. This code was originally required by the atmospheric and astrophysics communities, and its evolution is now driven by new scientific projects among the user community. Since it was designed without any optimization that would be specific to any particular application field, its use could also be extended to other domains. kspectrum produces spectral data that can subsequently be used either for high-resolution radiative transfer simulations, or for producing statistic spectral model parameters using additional tools. This is a open project that aims at providing an up-to-date tool that takes advantage of modern computational hardware and recent parallelization libraries. It is currently provided by Méso-Star (http://www.meso-star.com) under the CeCILL license, and benefits from regular updates and improvements.

  16. Flow Analysis for the Falkner–Skan Wedge Flow

    DEFF Research Database (Denmark)

    Bararnia, H; Haghparast, N; Miansari, M

    2012-01-01

    the constant coefficients in the approximated solution. The effects of the polynomial terms of HAM are considered and the accuracy of the results is shown, which increases with the increasing polynomial terms of HAM. Analytical results for the dimensionless velocity and temperature profiles of the wedge flow......In this article an analytical technique, namely the homotopy analysis method (HAM), is applied to solve the momentum and energy equations in the case of a two-dimensional incompressible flow passing over a wedge. The trail and error method and Padé approximation strategies have been used to obtain...

  17. Molecular Depth Profiling with Cluster SIMS and Wedges

    Science.gov (United States)

    Mao, Dan; Wucher, Andreas; Winograd, Nicholas

    2009-01-01

    Secondary ion mass spectrometry and atomic force microscopy are employed to characterize a wedge-shaped crater eroded by 40 keV C60+ bombardment of a 395-nm thin film of Irganox 1010 doped with four delta layers of Irganox 3114. The wedge structure creates a laterally magnified cross section of the film. From an examination of the resulting surface, information about depth resolution, topography and erosion rate can be obtained as a function of crater depth in a single experiment. This protocol provides a straightforward way to determine the parameters necessary to characterize molecular depth profiles, and to obtain an accurate depth scale for erosion experiments. PMID:19968247

  18. Surgical treatment of idiopathic syringomyelia: Silastic wedge syringosubarachnoid shunting technique

    Directory of Open Access Journals (Sweden)

    Teck M Soo

    2014-01-01

    Conclusions: Shunting procedures for the syringomyelia disease spectrum have been criticized due to the inconsistent long-term outcomes. This surgical technique used to treat symptomatic idiopathic syringomyelia has been devised based on our intraoperative experience, surgical outcomes, and evaluation of the literature. The purpose of the wedges is to preserve patency of the communication between the syrinx cavity and the expanded subarachnoid space by preventing healing of the myelotomy edges and by maintaining an artificial conduit between the syrinx cavity and the subarachnoid space. Although short-term results are promising, continued long-term follow up is needed to determine the ultimate success of the silastic wedge shunting procedure.

  19. Three-dimensional wedge filling in ordered and disordered systems

    Energy Technology Data Exchange (ETDEWEB)

    Greenall, M J [Department of Mathematics, Imperial College London, 180 Queen' s Gate, London SW7 2BZ (United Kingdom); Parry, A O [Department of Mathematics, Imperial College London, 180 Queen' s Gate, London SW7 2BZ (United Kingdom); Romero-Enrique, J M [Department of Mathematics, Imperial College London, 180 Queen' s Gate, London SW7 2BZ (United Kingdom)

    2004-04-21

    We investigate interfacial structural and fluctuation effects occurring at continuous filling transitions in 3D wedge geometries. We show that fluctuation-induced wedge covariance relations that have been reported recently for 2D filling and wetting have mean-field or classical analogues that apply to higher-dimensional systems. Classical wedge covariance emerges from analysis of filling in shallow wedges based on a simple interfacial Hamiltonian model and is supported by detailed numerical investigations of filling within a more microscopic Landau-like density functional theory. Evidence is presented that classical wedge covariance is also obeyed for filling in more acute wedges in the asymptotic critical regime. For sufficiently short-ranged forces mean-field predictions for the filling critical exponents and covariance are destroyed by pseudo-one-dimensional interfacial fluctuations. We argue that in this filling fluctuation regime the critical exponents describing the divergence of length scales are related to values of the interfacial wandering exponent {zeta}(d) defined for planar interfaces in (bulk) two-dimensional (d = 2) and three-dimensional (d = 3) systems. For the interfacial height l{sub w} {approx} {theta}-{alpha}){sup -{beta}}{sub w}, with {theta} the contact angle and {alpha} the wedge tilt angle, we find {beta}{sub w} = {zeta}(2)/2(1-{zeta}(3)). For pure systems (thermal disorder) we recover the known result {beta}{sub w} = 1/4 predicted by interfacial Hamiltonian studies whilst for random-bond disorder we predict the universal critical exponent {beta} {approx} even in the presence of dispersion forces. We revisit the transfer matrix theory of three-dimensional filling based on an effective interfacial Hamiltonian model and discuss the interplay between breather, tilt and torsional interfacial fluctuations. We show that the coupling of the modes allows the problem to be mapped onto a quantum mechanical problem as conjectured by previous authors

  20. Anatexis of accretionary wedge, Pacific-type magmatism, and formation of vertically stratified continental crust in the Altai Orogenic Belt

    Science.gov (United States)

    Jiang, Y. D.; Schulmann, K.; Sun, M.; Å típská, P.; Guy, A.; Janoušek, V.; Lexa, O.; Yuan, C.

    2016-12-01

    Granitoid magmatism and its role in differentiation and stabilization of the Paleozoic accretionary wedge in the Chinese Altai are evaluated in this study. Voluminous Silurian-Devonian granitoids intruded a greywacke-dominated Ordovician sedimentary succession (the Habahe Group) of the accretionary wedge. The close temporal and spatial relationship between the regional anatexis and the formation of granitoids, as well as their geochemical similarities including rather unevolved Nd isotopic signatures and the strong enrichment of large-ion lithophile elements relative to many of the high field strength elements, may indicate that the granitoids are product of partial melting of the accretionary wedge rocks. Whole-rock geochemistry and pseudosection modeling show that regional anatexis of fertile sediments could have produced a large amount of melts compositionally similar to the granitoids. Such process could have left a high-density garnet- and/or garnet-pyroxene granulite residue in the deep crust, which can be the major reason for the gravity high over the Chinese Altai. Our results show that melting and crustal differentiation can transform accretionary wedge sediments into vertically stratified and stable continental crust. This may be a key mechanism contributing to the peripheral continental growth worldwide.

  1. Analysis of open-pit mines using high-resolution topography from UAV

    Science.gov (United States)

    Chen, Jianping; Li, Ke; Sofia, Giulia; Tarolli, Paolo

    2015-04-01

    Among the anthropogenic topographic signatures on the Earth, open-pit mines deserve a great importance, since they significantly affect the Earth's surface and its related processes (e.g. erosion, pollution). Their geomorphological analysis, therefore, represents a real challenge for the Earth science community. The purpose of this research is to characterize the open-pit mining features using a recently published landscape metric, the Slope Local Length of Auto-Correlation (SLLAC) (Sofia et al., 2014), and high-resolution DEMs (Digital Elevation Models) derived from drone surveyed topography. The research focuses on two main case studies of iron mines located in the Beijing district (P.R. China). The main topographic information (Digital Surface Models, DSMs) was derived using Unmanned Aerial Vehicle (UAV) and the Structure from Motion (SfM) photogrammetric technique. The results underline the effectiveness of the adopted methodologies and survey techniques in the characterization of the main geomorphic features of the mines. Thanks to the SLLAC, the terraced area given by multi-benched sideways-moving method for the iron extraction is automatically depicted, and using some SLLAC derived parameters, the related terraces extent is automatically estimated. The analysis of the correlation length orientation, furthermore, allows to identify the terraces orientation respect to the North, and to understand as well the shape of the open-pit area. This provides a basis for a large scale and low cost topographic survey for a sustainable environmental planning and, for example, for the mitigation of environmental anthropogenic impact due to mining. References Sofia G., Marinello F, Tarolli P. 2014. A new landscape metric for the identification of terraced sites: the Slope Local Length of Auto-Correlation (SLLAC). ISPRS Journal of Photogrammetry and Remote Sensing, doi:10.1016/j.isprsjprs.2014.06.018

  2. Non-linear critical taper model and determination of accretionary wedge strength

    Science.gov (United States)

    Yang, Che-Ming; Dong, Jia-Jyun; Hsieh, Yuan-Lung; Liu, Hsueh-Hua; Liu, Cheng-Lung

    2016-12-01

    The critical taper model has been widely used to evaluate the strength contrast between the wedge and the basal detachment of fold-and-thrust belts and accretionary wedges. However, determination of the strength parameters using the traditional critical taper model, which adopts the Mohr-Coulomb failure criterion, is difficult, if not impossible. In this study, we propose a modified critical taper model that incorporates the non-linear Hoek-Brown failure criterion. The parameters in the proposed critical Hoek-Brown wedge CHBW model can be directly evaluated via field investigations and laboratory tests. Meanwhile, the wedge strength is a function of the wedge thickness, which is oriented from stress non-linearity. The fold-and-thrust belt in western central Taiwan was used as an example to validate the proposed model. The determined wedge strength was 0.86 using a representative wedge thickness of 5.3 km; this was close to the inferred value of 0.6 from the critical taper. Interestingly, a concave topographic relief is predicted as a result of the wedge thickness dependency of the wedge strength, even if the wedge is composed of homogeneous materials and if the strength of the detachment is uniform. This study demonstrates that the influence of wedge strength on the critical taper angle can be quantified by the spatial distribution of strength variables and by the consideration of the wedge thickness dependency of wedge strength.

  3. Effect of the Osteotomy Length on the Change of the Posterior Tibial Slope With a Simple Distraction of the Posterior Gap in the Uni- and Biplanar Open-Wedge High Tibial Osteotomy.

    Science.gov (United States)

    Lee, Yong Seuk; Kang, Jong Yeal; Lee, Myung Chul; Oh, Won Seok; Elazab, Ashraf; Song, Min Kyu

    2016-02-01

    To (1) determine the length of the osteotomy at the anterior and posterior cortex, (2) compare between uni- and biplanar osteotomy, and (3) evaluate the relationship between the extent of the osteotomy and change of the posterior tibial slope. A prospective comparative study of 24 uniplanar and 30 biplanar osteotomies was performed. To evaluate the length of osteotomy, osteotomy lines of the anterior and posterior cortex were analyzed in the 3-dimensional surface models. For slope measurement, the intramedullary axis of the proximal tibia (slope P), posterior cortical line of the proximal tibia (slope C), and anterior cortical line of the proximal fibula (slope F) were used. An analysis of the changes in the posterior tibial slope was performed independently using a pre- and postoperative lateral plane radiograph. In the uniplanar osteotomy, ratios of the osteotomized length to the total cortical length aligned with the osteotomized plane were larger in the anterior cortex (0.91 in uniplanar v 0.46 in biplanar; P = 0) and posterior cortex (0.97 in uniplanar v 0.79 ratio in biplanar; P = 0). Furthermore, the posterior tibial slope was maintained in both groups and the ratios between the anterior and posterior gap in both groups were 0.57 and 0.63, respectively. The maintenance of the slope was not related to any specific variables. Additionally, these phenomena did not differ between those patients who underwent uni- and those who underwent biplanar osteotomy. Increase in the posterior tibial slope was prevented with appropriate uni- or biplanar osteotomy with a simple distraction at the most posterior gap. However, in the uniplanar osteotomy, the ratio of the osteotomized length to the total cortical length was larger in both the anterior and posterior cortex. Copyright © 2016 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

  4. OpenCL-Based Linear Algebra Libraries for High-Performance Computing Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Despite its promise, OpenCL adoption is slow, owing to a lack of libraries and tools. Vendors have shown few signs of plans to provide OpenCL libraries, and were...

  5. MANTA--an open-source, high density electrophysiology recording suite for MATLAB.

    Science.gov (United States)

    Englitz, B; David, S V; Sorenson, M D; Shamma, S A

    2013-01-01

    The distributed nature of nervous systems makes it necessary to record from a large number of sites in order to decipher the neural code, whether single cell, local field potential (LFP), micro-electrocorticograms (μECoG), electroencephalographic (EEG), magnetoencephalographic (MEG) or in vitro micro-electrode array (MEA) data are considered. High channel-count recordings also optimize the yield of a preparation and the efficiency of time invested by the researcher. Currently, data acquisition (DAQ) systems with high channel counts (>100) can be purchased from a limited number of companies at considerable prices. These systems are typically closed-source and thus prohibit custom extensions or improvements by end users. We have developed MANTA, an open-source MATLAB-based DAQ system, as an alternative to existing options. MANTA combines high channel counts (up to 1440 channels/PC), usage of analog or digital headstages, low per channel cost (1 year, recording reliably from 128 channels. It offers a growing list of features, including integrated spike sorting, PSTH and CSD display and fully customizable electrode array geometry (including 3D arrays), some of which are not available in commercial systems. MANTA runs on a typical PC and communicates via TCP/IP and can thus be easily integrated with existing stimulus generation/control systems in a lab at a fraction of the cost of commercial systems. With modern neuroscience developing rapidly, MANTA provides a flexible platform that can be rapidly adapted to the needs of new analyses and questions. Being open-source, the development of MANTA can outpace commercial solutions in functionality, while maintaining a low price-point.

  6. Mobile Measurements of Methane Using High-Speed Open-Path Technology

    Science.gov (United States)

    Burba, G. G.; Anderson, T.; Ediger, K.; von Fischer, J.; Gioli, B.; Ham, J. M.; Hupp, J. R.; Kohnert, K.; Levy, P. E.; Polidori, A.; Pikelnaya, O.; Price, E.; Sachs, T.; Serafimovich, A.; Zondlo, M. A.; Zulueta, R. C.

    2016-12-01

    Methane plays a critical role in the radiation balance, chemistry of the atmosphere, and air quality. The major anthropogenic sources of CH4 include oil and gas development sites, natural gas distribution networks, landfill emissions, and agricultural production. The majority of oil and gas and urban CH4 emission occurs via variable-rate point sources or diffused spots in topographically challenging terrains (e.g., street tunnels, elevated locations at water treatment plants, vents, etc.). Locating and measuring such CH4 emissions is challenging when using traditional micrometeorological techniques, and requires development of novel approaches. Landfill CH4 emissions traditionally assessed at monthly or longer time intervals are subject to large uncertainties because of the snapshot nature of the measurements and the barometric pumping phenomenon. The majority of agricultural and natural CH4 production occurs in areas with little infrastructure or easily available grid power (e.g., rice fields, arctic and boreal wetlands, tropical mangroves, etc.). A lightweight, high-speed, high-resolution, open-path technology was recently developed for eddy covariance measurements of CH4 flux, with power consumption 30-150 times below other available technologies. It was designed to run on solar panels or a small generator and be placed in the middle of the methane-producing ecosystem without a need for grid power. Lately, this instrumentation has been utilized increasingly more frequently outside of the traditional use on stationary flux towers. These novel approaches include measurements from various moving platforms, such as cars, aircraft, and ships. Projects included mapping of concentrations and vertical profiles, leak detection and quantification, mobile emission detection from natural gas-powered cars, soil CH4 flux surveys, etc. This presentation will describe key projects utilizing the novel lightweight low-power high-resolution open-path technology, and will highlight

  7. MANTA—an open-source, high density electrophysiology recording suite for MATLAB

    Science.gov (United States)

    Englitz, B.; David, S. V.; Sorenson, M. D.; Shamma, S. A.

    2013-01-01

    The distributed nature of nervous systems makes it necessary to record from a large number of sites in order to decipher the neural code, whether single cell, local field potential (LFP), micro-electrocorticograms (μECoG), electroencephalographic (EEG), magnetoencephalographic (MEG) or in vitro micro-electrode array (MEA) data are considered. High channel-count recordings also optimize the yield of a preparation and the efficiency of time invested by the researcher. Currently, data acquisition (DAQ) systems with high channel counts (>100) can be purchased from a limited number of companies at considerable prices. These systems are typically closed-source and thus prohibit custom extensions or improvements by end users. We have developed MANTA, an open-source MATLAB-based DAQ system, as an alternative to existing options. MANTA combines high channel counts (up to 1440 channels/PC), usage of analog or digital headstages, low per channel cost (1 year, recording reliably from 128 channels. It offers a growing list of features, including integrated spike sorting, PSTH and CSD display and fully customizable electrode array geometry (including 3D arrays), some of which are not available in commercial systems. MANTA runs on a typical PC and communicates via TCP/IP and can thus be easily integrated with existing stimulus generation/control systems in a lab at a fraction of the cost of commercial systems. With modern neuroscience developing rapidly, MANTA provides a flexible platform that can be rapidly adapted to the needs of new analyses and questions. Being open-source, the development of MANTA can outpace commercial solutions in functionality, while maintaining a low price-point. PMID:23653593

  8. MANTA – An Open-Source, High Density Electrophysiology Recording Suite for MATLAB

    Directory of Open Access Journals (Sweden)

    Bernhard eEnglitz

    2013-05-01

    Full Text Available The distributed nature of nervous systems makes it necessary to record from a large number of sites in order to break the neural code, whether single cell, local field potential (LFP, micro-electrocorticograms (μECoG, electroencephalographic (EEG, magnetoencephalographic (MEG or in vitro micro-electrode array (MEA data are considered. High channel-count recordings also optimize the yield of a preparation and the efficiency of time invested by the researcher. Currently, data acquisition (DAQ systems with high channel counts (>100 can be purchased from a limited number of companies at considerable prices. These systems are typically closed-source and thus prohibit custom extensions or improvements by end users.We have developed MANTA, an open-source MATLAB-based DAQ system, as an alternative to existing options. MANTA combines high channel counts (up to 1440 channels/PC, usage of analog or digital headstages, low per channel cost (<$90/channel, feature-rich display & filtering, a user-friendly interface, and a modular design permitting easy addition of new features. MANTA is licensed under the GPL and free of charge. The system has been tested by daily use in multiple setups for >1 year, recording reliably from 128 channels. It offers a growing list of features, including integrated spike sorting, PSTH and CSD display and fully customizable electrode array geometry (including 3D arrays, some of which are not available in commercial systems. MANTA runs on a typical PC and communicates via TCP/IP and can thus be easily integrated with existing stimulus generation/control systems in a lab at a fraction of the cost of commercial systems.With modern neuroscience developing rapidly, MANTA provides a flexible platform that can be rapidly adapted to the needs of new analyses and questions. Being open-source, the development of MANTA can outpace commercial solutions in functionality, while maintaining a low price-point.

  9. Open Access Publishing in High-Energy Physics the SCOAP$^{3}$ model

    CERN Document Server

    Mele, S

    2009-01-01

    The Open Access (OA) movement is gaining an increasing momentum: its goal is to grant anyone, anywhere and anytime free access to the results of publicly funded scientific research. The High- Energy Physics (HEP) community has pioneered OA for decades, through its widespread “pre-print culture”. After almost half a century of worldwide dissemination of pre-prints, in paper first and electronically later, OA journals are becoming the natural evolution of scholarly communication in HEP. Among other OA business models, the one based on a sponsoring consortium appears as the most viable option for a transition of the HEP peer-reviewed literature to OA. The Sponsoring Consortium for Open Access Publishing in Particle Physics (SCOAP3) is proposed as a central body to remunerate publishers for their peer-review service, effectively replacing the “reader-pays” model of traditional subscriptions with an “author-side” funding, without any direct financial burden on individual authors and research groups. Su...

  10. The evolution of the Galactic metallicity gradient from high-resolution spectroscopy of open clusters

    CERN Document Server

    Magrini, Laura; Randich, Sofia; Galli, Daniele

    2008-01-01

    Open clusters offer a unique possibility to study the time evolution of the radial metallicity gradients of several elements in our Galaxy, because they span large intervals in age and Galactocentric distance, and both quantities can be more accurately derived than for field stars. We re-address the issue of the Galactic metallicity gradient and its time evolution by comparing the empirical gradients traced by a sample of 45 open clusters with a chemical evolution model of the Galaxy. At variance with previous similar studies, we have collected from the literature only abundances derived from high--resolution spectra. The clusters have distances $7 < RGC<22$ kpc and ages from $\\sim 30$ Myr to 11 Gyr. We also consider the $\\alpha$-elements Si, Ca, Ti, and the iron-peak elements Cr and Ni. The data for iron-peak and $\\alpha$-elements indicate a steep metallicity gradient for R_GC<12$ kpc and a plateau at larger radii. The time evolution of the metallicity distribution is characterized by a uniform incr...

  11. High-sensitivity open-loop electronics for gravimetric acoustic-wave-based sensors.

    Science.gov (United States)

    Rabus, David; Friedt, Jean-Michel; Ballandras, Sylvain; Martin, Gilles; Carry, Emile; Blondeau-Patissier, Virginie

    2013-06-01

    Detecting chemical species in gas phase has recently received an increasing interest mainly for security control, trying to implement new systems allowing for extended dynamics and reactivity. In this work, an open-loop interrogation strategy is proposed to use radio-frequency acoustic transducers as micro-balances for that purpose. The resulting system is dedicated to the monitoring of chemical compounds in gaseous or liquid-phase state. A 16 Hz standard deviation is demonstrated at 125 MHz, with a working frequency band in the 60 to 133 MHz range, answering the requirements for using Rayleigh- and Love-wave-based delay lines operating with 40-μm acoustic wavelength transducers. Moreover, this electronic setup was used to interrogate a high-overtone bulk acoustic wave resonator (HBAR) microbalance, a new sensor class allowing for multi-mode interrogation for gravimetric measurement improvement. The noise source still limiting the system performance is due to the analog-to-digital converter of the microcontroller, thus leaving open degrees-of-freedom for improving the obtained results by optimizing the voltage reference and board layout. The operation of the system is illustrated using a calibrated galvanic deposition at the surface of Love-wave delay lines to assess theoretical predictions of their gravimetric sensitivity and to compare them with HBAR-based sensor sensitivity.

  12. Active Aerothermoelastic Control of Hypersonic Double-wedge Lifting Surface

    Institute of Scientific and Technical Information of China (English)

    Laith K Abbas; Chen Qian; Piergiovanni Marzocca; Gürdal Zafer; Abdalla Mostafa

    2008-01-01

    Designing reentry space vehicles and high-speed aireraft requires special attention to the nonlinear thermoelastic and aerodynamic instability of their structural components. The thermal effects are important since temperature environment brings dramatic influences on the static and dynamic behaviors of flight structures in supersonic/hypersonic regimes and is likely to cause instability, catastrophic failure and oscillations resulting in structural failure due to fatigue. In order to understand the dynamic behaviors of these "hot"structures, a double-wedge lifting surface with combining freeplay and cubic structural nonlinearities in both plunging and pitching degrees-of-freedom operating in supersonic/hypersonic flight speed regimes has been analyzed. A third order piston theory aerodynamic isused to estimate the applied nonlinear unsteady aerodynamic loads. Also considered is the loss of torsiunal stiffness that may be incurredby lifting surfaces subject to axial stresses induced by aerodynamic heating. The aerodynamic heating effects are estimated based on theadiabatic wall temperature due to high speed airstreams. As a recently emerging technology, the active aerothermoelastic control isaimed at providing solutions to a large number of problems involving the aeronautica Faerospace flight vehicle structures. To preventsuch damaging phenomena from occurring, an application of linear and nonlinear active control methods on both flutter boundary andpost-flutter behavior has been fulfilled. In this paper, modeling issues as well as numerical simulation have been presented and pertinent conclusions outlined. It is evidenced that a serious loss of torsional stiffness may induce the dynamic instability; however active controlcan be used to expand the flutter boundary and convert unstable limit cycle oscillations (LCO) into the stable LCO and/or to shift the transition between these two states toward higher flight Mach numbers.

  13. Laboratory investigation of water extraction effects on saltwater wedge displacement

    Directory of Open Access Journals (Sweden)

    S. Noorabadi

    2017-12-01

    Full Text Available There is a close connection between saltwater intrusion into aquifers and groundwater extraction. Freshwater extraction in coastal aquifers is one of the most important reasons for the saltwater intrusion into these aquifers. Condition of extraction system such as well depth, discharge rate, saltwater concentration and etc. could affect this process widely. Thus, investigating different extraction conditions comprises many management advantages.  In the present study, the effects of freshwater extraction on saltwater interface displacement have been investigated in a laboratory box. Three different well depths (H were considered with combinations of 3 different extraction rates (Q and 3 saltwater concentrations (C for detailed investigation of the effects of these factors variations on saltwater displacement. SEAWAT model has been used to simulate all the scenarios to numerically study of the process. The experimental and numerical results showed that when the C and Q rates were small and the well depth was shallow, the saltwater interface wouldn’t reach the extraction well, so the extracted water remained uncontaminated. When the C and Q rates were increased and the well was deepened, the salinity of the extracted water became higher. When the Q and C rates were high enough, in the shallow well depth, the final concentration of the extracted water was low but a huge part of the porous media was contaminated by the saltwater, furthermore when the well was deepened enough, the final concentration of the extracted water was increased but a small part of the porous media was contaminated by the saltwater. Finally, the results showed that when the Q and H rates were high enough, the extraction well behaved like a barrier and didn’t allow the advancing saltwater wedge toe to be intruded beyond the wells.

  14. Evaluation of ‘OpenCL for FPGA’ for Data Acquisition and Acceleration in High Energy Physics

    Science.gov (United States)

    Sridharan, Srikanth

    2015-12-01

    The increase in the data acquisition and processing needs of High Energy Physics experiments has made it more essential to use FPGAs to meet those needs. However harnessing the capabilities of the FPGAs has been hard for anyone but expert FPGA developers. The arrival of OpenCL with the two major FPGA vendors supporting it, offers an easy software-based approach to taking advantage of FPGAs in applications such as High Energy Physics. OpenCL is a language for using heterogeneous architectures in order to accelerate applications. However, FPGAs are capable of far more than acceleration, hence it is interesting to explore if OpenCL can be used to take advantage of FPGAs for more generic applications. To answer these questions, especially in the context of High Energy Physics, two applications, a DAQ module and an acceleration workload, were tested for implementation with OpenCL on FPGAs2. The challenges on using OpenCL for a DAQ application and their solutions, together with the performance of the OpenCL based acceleration are discussed. Many of the design elements needed to realize a DAQ system in OpenCL already exists, mostly as FPGA vendor extensions, but a small number of elements were found to be missing. For acceleration of OpenCL applications, using FPGAs has become as easy as using GPUs. OpenCL has the potential for a massive gain in productivity and ease of use enabling non FPGA experts to design, debug and maintain the code. Also, FPGA power consumption is much lower than other implementations. This paper describes one of the first attempts to explore the use of OpenCL for applications outside the acceleration workloads.

  15. Cost Effective Open Geometry HTS MRI System amended to BSCCO 2212 Wire for High Field Magnets

    Energy Technology Data Exchange (ETDEWEB)

    Kennth Marken

    2006-08-11

    The original goal of this Phase II Superconductivity Partnership Initiative project was to build and operate a prototype Magnetic Resonance Imaging (MRI) system using high temperature superconductor (HTS) coils wound from continuously processed dip-coated BSCCO 2212 tape conductor. Using dip-coated tape, the plan was for MRI magnet coils to be wound to fit an established commercial open geometry, 0.2 Tesla permanent magnet system. New electronics and imaging software for a prototype higher field superconducting system would have added significantly to the cost. However, the use of the 0.2 T platform would allow the technical feasibility and the cost issues for HTS systems to be fully established. Also it would establish the energy efficiency and savings of HTS open MRI compared with resistive and permanent magnet systems. The commercial goal was an open geometry HTS MRI running at 0.5 T and 20 K. This low field open magnet was using resistive normal metal conductor and its heat loss was rather high around 15 kolwatts. It was expected that an HTS magnet would dissipate around 1 watt, significantly reduce power consumption. The SPI team assembled to achieve this goal was led by Oxford Instruments, Superconducting Technology (OST), who developed the method of producing commercial dip coated tape. Superconductive Components Inc. (SCI), a leading US supplier of HTS powders, supported the conductor optimization through powder optimization, scaling, and cost reduction. Oxford Magnet Technology (OMT), a joint venture between Oxford Instruments and Siemens and the world’s leading supplier of MRI magnet systems, was involved to design and build the HTS MRI magnet and cryogenics. Siemens Magnetic Resonance Division, a leading developer and supplier of complete MRI imaging systems, was expected to integrate the final system and perform imaging trials. The original MRI demonstration project was ended in July 2004 by mutual consent of Oxford Instruments and Siemens. Between

  16. Highly Defined Multiblock Copolypeptoids: Pushing the Limits of Living Nucleophilic Ring-Opening Polymerization

    KAUST Repository

    Fetsch, Corinna

    2012-06-05

    Advanced macromolecular engineering requires excellent control over the polymerization reaction. Living polymerization methods are notoriously sensitive to impurities, which makes a practical realization of such control very challenging. Reversible-deactivation radical polymerization methods are typically more robust, but have other limitations. Here, we demonstrate by repeated (ge;10 times) chain extension the extraordinary robustness of the living nucleophilic ring-opening polymerization of N-substituted glycine N-carboxyanhydrides, which yields polypeptoids. We observe essentially quantitative end-group fidelity under experimental conditions that are comparatively easily managed. This is employed to synthesize a pentablock quinquiespolymer with high definition. © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  17. Realizing the increased potential of an open-system high-definition digital projector design

    Science.gov (United States)

    Daniels, Reginald

    1999-05-01

    Modern video projectors are becoming more compact and capable. Various display technologies are very competitive and are delivering higher performance and more compact projectors to market at an ever quickening pace. However the end users are often left with the daunting task of integrating the 'off the self projectors' into a previously existing system. As the projectors become more digitally enhanced, there will be a series of designs, and the digital projector technology matures. The design solutions will be restricted by the state of the art at the time of manufacturing. In order to allow the most growth and performance for a given price, many design decisions will be made and revisited over a period of years or decades. A modular open digital system design concept is indeed a major challenge of the future high definition digital displays for al applications.

  18. Open hole packer for high pressure service in a five hundred degree fahrenheit precambrian wellbore

    Energy Technology Data Exchange (ETDEWEB)

    Dreesen, D.S.; Miller, J.R.; Halbardier, F.A.; Nicholson, R.W.

    1985-01-01

    Massive hydraulic fracturing (MHF) from a lower wellbore (EE-2) created a large man-made reservoir which did not intersect the upper well (EE-3). To create a heat extraction flow loop, the upper well was sidetracked and redrilled (EE-3A) down into a microseismic cloud around EE-2 mapped during the MHF. The potential to intersect numerous fracture zones in the redrilled bore was apparent from seismicity. To economically and effectively isolate and test these microseismic zones required that a functional open hole packer be developed. The packer would be exposed to soak temperatures as high as 500/sup 0/F (260/sup 0/C) with cool down to 100/sup 0/F (40/sup 0/C) at differential pressures exceeding 5000 psi (35 Mpa). A functional packer has been designed, manufactured, and successfully used for the creation of a hot dry rock (HDR) reservoir. 5 figs., 1 tab.

  19. The Open Cloud Testbed: A Wide Area Testbed for Cloud Computing Utilizing High Performance Network Services

    CERN Document Server

    Grossman, Robert; Sabala, Michal; Bennet, Collin; Seidman, Jonathan; Mambratti, Joe

    2009-01-01

    Recently, a number of cloud platforms and services have been developed for data intensive computing, including Hadoop, Sector, CloudStore (formerly KFS), HBase, and Thrift. In order to benchmark the performance of these systems, to investigate their interoperability, and to experiment with new services based on flexible compute node and network provisioning capabilities, we have designed and implemented a large scale testbed called the Open Cloud Testbed (OCT). Currently the OCT has 120 nodes in four data centers: Baltimore, Chicago (two locations), and San Diego. In contrast to other cloud testbeds, which are in small geographic areas and which are based on commodity Internet services, the OCT is a wide area testbed and the four data centers are connected with a high performance 10Gb/s network, based on a foundation of dedicated lightpaths. This testbed can address the requirements of extremely large data streams that challenge other types of distributed infrastructure. We have also developed several utiliti...

  20. Development of highly open polyhedral networks from vitreous carbon for orthopaedic applications

    Science.gov (United States)

    Güiza-Argüello, V.; Bayona-Becerra, M.; Cruz-Orellana, S.; Córdoba-Tuta, E.

    2017-01-01

    Highly open polyhedral networks were fabricated using an economical and environmentally friendly template route. Recycled cellulose foams were impregnated with a sucrose resin and then pyrolyzed in order to produce reticulated vitreous carbon foams with morphological features that closely resemble trabecular bone. Also, cell sizes ~1mm were achieved, a trait that will allow the mechanical reinforcement of such scaffolds using a biomaterial coating without compromising the pore size that favors osteoblast cell infiltration and growth (200-500µm). Moreover, initial studies showed that carbonization conditions have an effect on the mechanical properties of the synthesized foams and, therefore, such process parameters could be further evaluated towards the enhancement of the mechanical resistance of the scaffolds. The materials developed here are visualized as the porous component of a synthetic bone graft with features that could help overcome the current limitations associated with the medical treatments used for bone defect repair.

  1. Cost Effective Open Geometry HTS MRI System amended to BSCCO 2212 Wire for High Field Magnets

    Energy Technology Data Exchange (ETDEWEB)

    Kennth Marken

    2006-08-11

    The original goal of this Phase II Superconductivity Partnership Initiative project was to build and operate a prototype Magnetic Resonance Imaging (MRI) system using high temperature superconductor (HTS) coils wound from continuously processed dip-coated BSCCO 2212 tape conductor. Using dip-coated tape, the plan was for MRI magnet coils to be wound to fit an established commercial open geometry, 0.2 Tesla permanent magnet system. New electronics and imaging software for a prototype higher field superconducting system would have added significantly to the cost. However, the use of the 0.2 T platform would allow the technical feasibility and the cost issues for HTS systems to be fully established. Also it would establish the energy efficiency and savings of HTS open MRI compared with resistive and permanent magnet systems. The commercial goal was an open geometry HTS MRI running at 0.5 T and 20 K. This low field open magnet was using resistive normal metal conductor and its heat loss was rather high around 15 kolwatts. It was expected that an HTS magnet would dissipate around 1 watt, significantly reduce power consumption. The SPI team assembled to achieve this goal was led by Oxford Instruments, Superconducting Technology (OST), who developed the method of producing commercial dip coated tape. Superconductive Components Inc. (SCI), a leading US supplier of HTS powders, supported the conductor optimization through powder optimization, scaling, and cost reduction. Oxford Magnet Technology (OMT), a joint venture between Oxford Instruments and Siemens and the world’s leading supplier of MRI magnet systems, was involved to design and build the HTS MRI magnet and cryogenics. Siemens Magnetic Resonance Division, a leading developer and supplier of complete MRI imaging systems, was expected to integrate the final system and perform imaging trials. The original MRI demonstration project was ended in July 2004 by mutual consent of Oxford Instruments and Siemens. Between

  2. Great Earthquakes and Orogenic Wedge Front Processes in the Bolivian Backarc

    Science.gov (United States)

    Brooks, B. A.; Arrowsmith, R.; Echalar, A.; Yagupsky, D.; Ericksen, T. L.; Weiss, J. R.; Ahlgren, K.; Bevis, M. G.; Whipple, K. X.

    2011-12-01

    The potential for earthquakes greater than Mw 8 rupturing the decollement below Bolivia's Southern Subandes orogenic wedge has been recently recognized although great events are not documented in historical seismicity catalogs and paleoseismologic studies in this part of Bolivia are non-existent. Here, we present the first evidence for a recent surface-rupturing event of at least 7m at the range-front Mandeyapecua fault near the town of Carandaiti. SRTM topography and published industry sub-surface data demonstrate that the ~500km long fault has at least three main segments, each greater than 100 km, with total relief of 10s of meters. We acquired kinematic GPS and terrestrial laser scanner surveys at 26 sites along the 2 northern segments of the fault. Everywhere the profiles of the frontal scarp are very similar to one another: relief is ~8-12m and scarp face inclination is ~7 degrees. Moreover, the slope faces are unbroken and have constant dip, consistent with a single event rupturing each site. We estimate paleo- Mw using thrust earthquake scaling relations and an across-strike rupture length of 85-100km (the locked zone from the geodetic studies). A rupture aspect ratio of ~1:1 sets the lower limit at ~ Mw 8.0 although, if a single event is responsible, then minimum magnitude is more likely Mw ~ 8.2-8.4. Regional geomorphic studies constrain the age of the faulted lithofacies from 1.6 to 4.4ka and minimum short-term slip rates from 4.3 to 1.8 mm/yr. For comparison, published dates and seismic reflection data yield a Quaternary slip rate of 2.4mm/yr. Each of these estimates is significantly less than the geodetically-determined, currently accumulating slip rate of ~10mm/yr. The implication, then, is that some of the other structures within the wedge must be active, although, as yet, we have found no field evidence for this. We use minimum work orogenic models to investigate the physical controls on fault activity in the wedge and show that, whereas for high

  3. locally fabricated metal step wedge for quality assurance in ...

    African Journals Online (AJOL)

    DR. AMINU

    materials, as well as to investigate an alternative wedge material. The values of the ... The use of low performance x-ray machines. b. ... machine in the Radiology Department of. JUTH is .... the x-ray beam, while ms determines the interaction.

  4. Stark effect in a wedge-shaped quantum box

    CERN Document Server

    Reyes-Esqueda, J A; Castillo-Mussot, M; Vazquez, G J; Reyes-Esqueda, Jorge-Alejandro; Mendoza, Carlos I.; Castillo-Mussot, Marcelo del; Vazquez, Gerardo J.

    2005-01-01

    The effect of an external applied electric field on the electronic ground state energy of a quantum box with a geometry defined by a wedge is studied by carrying out a variational calculation. This geometry could be used as an approximation for a tip of a cantilever of an atomic force microscope. We study theoretically the Stark effect as function of the parameters of the wedge: its diameter, angular aperture and thickness; as well as function of the intensity of the external electric field applied along the axis of the wedge in both directions; pushing the carrier towards the wider or the narrower parts. A confining electronic effect, which is sharper as the wedge dimensions are smaller, is clearly observed for the first case. Besides, the sign of the Stark shift changes when the angular aperture is changed from small angles to angles theta>pi. For the opposite field, the electronic confinement for large diameters is very small and it is also observed that the Stark shift is almost independent with respect t...

  5. Thoracoscopic pulmonary wedge resection without post-operative chest drain

    DEFF Research Database (Denmark)

    Holbek, Bo Laksafoss; Hansen, Henrik Jessen; Kehlet, Henrik

    2016-01-01

    : Forced expiratory volume in 1 s (FEV1) ≥60 % of expected, FEV1/forced vital capacity ≥70 %, tumour diameter ≤2 cm, distance from tumour to visceral pleura ≤3 cm, ≤2 separate wedges, no air leak on an intraoperative air leakage test and absence of severe adhesions, bullous/emphysematous disease, pleural...

  6. Wedges, Cones, Cosmic Strings, and the Reality of Vacuum Energy

    CERN Document Server

    Fulling, S A; Truong, P N; Wagner, J

    2012-01-01

    One of J. Stuart Dowker's most significant achievements has been to observe that the theory of diffraction by wedges developed a century ago by Sommerfeld and others provided the key to solving two problems of great interest in general-relativistic quantum field theory during the last quarter of the twentieth century: the vacuum energy associated with an infinitely thin, straight cosmic string, and (after an interchange of time with a space coordinate) the apparent vacuum energy of empty space as viewed by an accelerating observer. In a sense the string problem is more elementary than the wedge, since Sommerfeld's technique was to relate the wedge problem to that of a conical manifold by the method of images. Indeed, Minkowski space, as well as all cone and wedge problems, are related by images to an infinitely sheeted master manifold, which we call Dowker space. We review the research in this area and exhibit in detail the vacuum expectation values of the energy density and pressure of a scalar field in Dowk...

  7. Discrete dislocation plasticity analysis of the wedge indentation of films

    NARCIS (Netherlands)

    Balint, D. S.; Deshpande, V. S.; Needleman, A.; Van der Giessen, E.

    2006-01-01

    The plane strain indentation of single crystal films on a rigid substrate by a rigid wedge indenter is analyzed using discrete dislocation plasticity. The crystals have three slip systems at +/- 35.3 degrees and 90 degrees with respect to the indentation direction. The analyses are carried out for

  8. Fixed Points of Maps of a Nonaspherical Wedge

    Directory of Open Access Journals (Sweden)

    Merrill Keith

    2009-01-01

    Full Text Available Abstract Let be a finite polyhedron that has the homotopy type of the wedge of the projective plane and the circle. With the aid of techniques from combinatorial group theory, we obtain formulas for the Nielsen numbers of the selfmaps of .

  9. Magnetic and structural instabilities of ultrathin Fe(100) wedges

    Energy Technology Data Exchange (ETDEWEB)

    Bader, S.D.; Li, Dongqi; Qiu, Z.Q.

    1994-05-01

    An overview is provided of recent efforts to explore magnetic and related structural issues for ultrathin Fe films grown epitaxially as wedge structures onto Ag(100) and Cu(100). Experiments were carried out utilizing the surface magneto-optic Kerr effect (SMOKE). Ordinary bcc Fe is lattice-matched to the primitive unit cell of the Ag(100) surface. Fe wedges on Ag(100) can be fabricated whose thick end has in-plane magnetic easy axes due to the shape anisotropy, and whose thin end has perpendicular easy axes due to the surface magnetic anisotrophy. A spin-reorientation transition can thus be studied in the center of the wedge where the competing anisotropies cancel. The goal is to test the Mermin-Wagner theorem which states that long-range order is lost at finite temperatures in an isotropic two-dimensional Heisenberg system. Fe wedges on Cu(100) can be studied in like manner, but the lattice matching permits fcc and tetragonally-distorted fcc phases to provide structural complexity in addition to the interplay of competing magnetic anisotropies. The results of these studies are new phase identifications that help both to put previous work into perspective and to define issues to pursue in the future.

  10. EUV magnetic-dipole lines from highly-charged high-Z ions with an open 3d shell

    CERN Document Server

    Osin, D; Reader, J; Ralchenko, Yu

    2012-01-01

    The electron beam ion trap (EBIT) at the National Institute of Standards and Technology was used to produce highly-charged ions of hafnium, tantalum and gold with an open 3d shell. The extreme-ultraviolet (EUV) spectra from these ions were recorded with a flat-field grazing-incidence spectrometer in the wavelength range of 4.5 nm to 25 nm. A total of 133 new spectral lines, primarily due to magnetic-dipole transitions within the ground-state $3d^n$ configurations of the Co-like to K-like ions, were identified by comparing energy-dependent experimental spectra with a detailed collisional-radiative modeling of the EBIT plasma.

  11. Effect of Ferrite Magnetic Wedge on Capacitor Motor Characteristics in Triac Control

    Science.gov (United States)

    Kaga, Akio; Anazawa, Yoshihisa; Tajima, Katsubumi

    1991-07-01

    Split-phase capacitor motors are commonly used to drive household electric appliances. The motor has some slots and teeth to embed electric conductors or coils. The presence of the slots and teeth induces the variation of magnetic reluctance through the magnetic circuit to introduce heavy pulsation of the air gap flux. Thus, the voltage, current and torque of the motor become oscillative to increase the electric power loss and finally to reduce the motor efficiency. First, the authors discuss the characteristics of a 3-phase cage-type induction motor in which the ferrite magnetic wedges have been installed into the stator slot openings of the motor to smooth the air gap flux pulsation and to decrease the electric power loss, resulting in improved motor efficiency. If the motor is driven by the voltage source in accordance with the loading condition, more economical operation will be achieved. In this study, a nonsinusoidal voltage controlled by the switching element of a triac has been applied to a capacitor motor with wedges of ferrite magnetic materials. This paper reports on the interesting results obtained.

  12. Restraint of fatigue crack growth by wedge effects of fine particles

    CERN Document Server

    Takahashi, I; Kotani, N

    2000-01-01

    Presents some experimental results which demonstrate restraint of fatigue crack growth in an Al-Mg alloy by wedge effects of fine particles. Fatigue test specimens were machined from a JIS A5083P-O Al-Mg alloy plate of 5 mm thickness and an EDM starter notch was introduced to each specimen. Three kinds of fine particles were prepared as the materials to be wedged into the fatigue cracks, i.e. magnetic particles and two kinds of alumina particles having different mean particle sizes of 47.3 mu m and 15.2 mu m. Particles of each kind were suspended in an oil to form a paste, which was applied on the specimen surface covering the notch zone prior to the fatigue tests. In order to make some fracture mechanics approaches, in situ observations of fatigue cracks were performed for the two cases using a CCD microscope, with a magnification of *1000. The crack length and the crack opening displacement (COD) at the notch root, delta , were measured. The crack retardation effect continues almost through the entire lifet...

  13. Integrated Analysis Platform: An Open-Source Information System for High-Throughput Plant Phenotyping.

    Science.gov (United States)

    Klukas, Christian; Chen, Dijun; Pape, Jean-Michel

    2014-06-01

    High-throughput phenotyping is emerging as an important technology to dissect phenotypic components in plants. Efficient image processing and feature extraction are prerequisites to quantify plant growth and performance based on phenotypic traits. Issues include data management, image analysis, and result visualization of large-scale phenotypic data sets. Here, we present Integrated Analysis Platform (IAP), an open-source framework for high-throughput plant phenotyping. IAP provides user-friendly interfaces, and its core functions are highly adaptable. Our system supports image data transfer from different acquisition environments and large-scale image analysis for different plant species based on real-time imaging data obtained from different spectra. Due to the huge amount of data to manage, we utilized a common data structure for efficient storage and organization of data for both input data and result data. We implemented a block-based method for automated image processing to extract a representative list of plant phenotypic traits. We also provide tools for build-in data plotting and result export. For validation of IAP, we performed an example experiment that contains 33 maize (Zea mays 'Fernandez') plants, which were grown for 9 weeks in an automated greenhouse with nondestructive imaging. Subsequently, the image data were subjected to automated analysis with the maize pipeline implemented in our system. We found that the computed digital volume and number of leaves correlate with our manually measured data in high accuracy up to 0.98 and 0.95, respectively. In summary, IAP provides a multiple set of functionalities for import/export, management, and automated analysis of high-throughput plant phenotyping data, and its analysis results are highly reliable.

  14. Building highly available control system applications with Advanced Telecom Computing Architecture and open standards

    Science.gov (United States)

    Kazakov, Artem; Furukawa, Kazuro

    2010-11-01

    Requirements for modern and future control systems for large projects like International Linear Collider demand high availability for control system components. Recently telecom industry came up with a great open hardware specification - Advanced Telecom Computing Architecture (ATCA). This specification is aimed for better reliability, availability and serviceability. Since its first market appearance in 2004, ATCA platform has shown tremendous growth and proved to be stable and well represented by a number of vendors. ATCA is an industry standard for highly available systems. On the other hand Service Availability Forum, a consortium of leading communications and computing companies, describes interaction between hardware and software. SAF defines a set of specifications such as Hardware Platform Interface, Application Interface Specification. SAF specifications provide extensive description of highly available systems, services and their interfaces. Originally aimed for telecom applications, these specifications can be used for accelerator controls software as well. This study describes benefits of using these specifications and their possible adoption to accelerator control systems. It is demonstrated how EPICS Redundant IOC was extended using Hardware Platform Interface specification, which made it possible to utilize benefits of the ATCA platform.

  15. Wedges, cones, cosmic strings and their vacuum energy

    Science.gov (United States)

    Fulling, S. A.; Trendafilova, C. S.; Truong, P. N.; Wagner, J.

    2012-09-01

    One of J Stuart Dowker’s most significant achievements has been to observe that the theory of diffraction by wedges developed a century ago by Sommerfeld and others provided the key to solving two problems of great interest in general-relativistic quantum field theory during the last quarter of the 20th century: the vacuum energy associated with an infinitely thin, straight cosmic string, and (after an interchange of time with a space coordinate) the apparent vacuum energy of empty space as viewed by an accelerating observer. In a sense the string problem is more elementary than the wedge, since Sommerfeld’s technique was to relate the wedge problem to that of a conical manifold by the method of images. Indeed, Minkowski space, as well as all cone and wedge problems, are related by images to an infinitely sheeted master manifold, which we call Dowker space. We review the research in this area and exhibit in detail the vacuum expectation values of the energy density and pressure of a scalar field in Dowker space and the cone and wedge spaces that result from it. We point out that the (vanishing) vacuum energy of Minkowski space results, from the point of view of Dowker space, from the quantization of angular modes, in precisely the way that the Casimir energy of a toroidal closed universe results from the quantization of Fourier modes; we hope that this understanding dispels any lingering doubts about the reality of cosmological vacuum energy. This article is part of a special issue of Journal of Physics A: Mathematical and Theoretical in honour of Stuart Dowker’s 75th birthday devoted to ‘Applications of zeta functions and other spectral functions in mathematics and physics’.

  16. NeuriteQuant: An open source toolkit for high content screens of neuronal Morphogenesis

    Directory of Open Access Journals (Sweden)

    Hwang Eric

    2011-10-01

    Full Text Available Abstract Background To date, some of the most useful and physiologically relevant neuronal cell culture systems, such as high density co-cultures of astrocytes and primary hippocampal neurons, or differentiated stem cell-derived cultures, are characterized by high cell density and partially overlapping cellular structures. Efficient analytical strategies are required to enable rapid, reliable, quantitative analysis of neuronal morphology in these valuable model systems. Results Here we present the development and validation of a novel bioinformatics pipeline called NeuriteQuant. This tool enables fully automated morphological analysis of large-scale image data from neuronal cultures or brain sections that display a high degree of complexity and overlap of neuronal outgrowths. It also provides an efficient web-based tool to review and evaluate the analysis process. In addition to its built-in functionality, NeuriteQuant can be readily extended based on the rich toolset offered by ImageJ and its associated community of developers. As proof of concept we performed automated screens for modulators of neuronal development in cultures of primary neurons and neuronally differentiated P19 stem cells, which demonstrated specific dose-dependent effects on neuronal morphology. Conclusions NeuriteQuant is a freely available open-source tool for the automated analysis and effective review of large-scale high-content screens. It is especially well suited to quantify the effect of experimental manipulations on physiologically relevant neuronal cultures or brain sections that display a high degree of complexity and overlap among neurites or other cellular structures.

  17. Gap formation processes in a high-density plasma opening switch

    Science.gov (United States)

    Grossmann, J. M.; Swanekamp, S. B.; Ottinger, P. F.; Commisso, R. J.; Hinshelwood, D. D.; Weber, B. V.

    1995-01-01

    A gap opening process in plasma opening switches (POS) is examined with the aid of numerical simulations. In these simulations, a high density (ne=1014-5×1015 cm-3) uniform plasma initially bridges a small section of the coaxial transmission line of an inductive energy storage generator. A short section of vacuum transmission line connects the POS to a short circuit load. The results presented here extend previous simulations in the ne=1012-1013 cm-3 density regime. The simulations show that a two-dimensional (2-D) sheath forms in the plasma near a cathode. This sheath is positively charged, and electrostatic sheath potentials that are large compared to the anode-cathode voltage develop. Initially, the 2-D sheath is located at the generator edge of the plasma. As ions are accelerated out of the sheath, it retains its original 2-D structure, but migrates axially toward the load creating a magnetically insulated gap in its wake. When the sheath reaches the load edge of the POS, the POS stops conducting current and the load current increases rapidly. At the end of the conduction phase a gap exists in the POS whose size is determined by the radial dimensions of the 2-D sheath. Simulations at various plasma densities and current levels show that the radial size of the gap scales roughly as B/ne, where B is the magnetic field. The results of this work are discussed in the context of long-conduction-time POS physics, but exhibit the same physical gap formation mechanisms as earlier lower density simulations more relevant to short-conduction-time POS.

  18. Recent movements along the Main Boundary Thrust of the Himalayas: Normal faulting in an over-critical thrust wedge?

    Science.gov (United States)

    Mugnier, Jean-Louis; Huyghe, Pascale; Chalaron, Edouard; Mascle, Georges

    1994-11-01

    The Main Boundary Thrust (MBT) is one of the major Himalayan thrusts occurring during the Cainozoic, and it is presently incorporated within the Himalayan thrust wedge (Lesser and Outer Himalayas) displaced above the Indian lithosphere. Nonetheless the MBT shows recent normal displacement along most of its length. We suggest that the orientation of the major principal stress within the Himalayan thrust wedge deviates significantly from the horizontal and when this deviation exceeds the dip of the vectors normal to back-tilted thrusts, the normal component of displacement may act along these faults. Steep north-dipping segments of the MBT therefore show a normal component of displacement if a geometrical definition is used, but they are faults in a compressional regime where the major principal stress axis has deviated from the horizontal. Micro-structural data recorded along the Surkhet-Ghorahi segment of the MBT are consistent with a strong deviation of the state of stress. The presence of such peculiar normal faulting along the MBT is used to calibrate the mechanical characteristics of the belt considered as a Coulomb wedge. The following characteristics are suggested: (a) very poor strength contrast between basal decollement and rocks in the wedge body, (b) a high pore fluid pressure ratio (probably close to 0.8-0.9) and a higher fluid pressure ratio (close to 1.0) along the active normal faults if a high internal friction angle (close to the Byerlee value) is considered. The strong deviation in principal stress direction may have recently increased, due to a taper of the Himalayan wedge exceeding the stability boundary and may be controlled by erosion and isostatic uplift rebound of the Himalayan range.

  19. Outlook for the use of microsecond plasma opening switches to generate high-power nanosecond current pulses

    Science.gov (United States)

    Dolgachev, G. I.; Maslennikov, D. D.; Ushakov, A. G.

    2006-12-01

    An analysis is made of the current break process in microsecond plasma opening switches and their possible application in high-current generators. Necessary conditions are determined for generating megavolt pulses in the erosion mode of a plasma opening switch with the gap insulated by an external magnetic field. Under these conditions, efficient sharpening of high-power submegampere current pulses can be achieved. The possibility of using plasma opening switches operating at voltages of 5 6 MV to generate X-ray and gamma emission is discussed. The main operating and design parameters of a six-module plasma opening switch with a current pulse amplitude of 3.7 MA and voltage of 4 6 MV for use in the MOL generator, which is the prototype of one of the 24 modules of the projected Baikal multimegajoule generator, are estimated by using the available scalings.

  20. Correlates of Marijuana Drugged Driving and Openness to Driving While High: Evidence from Colorado and Washington

    Science.gov (United States)

    Davis, Kevin C.; Allen, Jane; Duke, Jennifer; Nonnemaker, James; Bradfield, Brian; Farrelly, Matthew C.; Shafer, Paul; Novak, Scott

    2016-01-01

    perceptions than knowledge of DUI laws. Increased perceptions that driving while high is unsafe was associated with significantly lower willingness to drive after using marijuana while increased knowledge of marijuana DUI laws was not associated with these outcomes. Conclusions Despite recent interventions targeting public awareness of the legal consequences of marijuana DUI, our results suggest that knowledge of these laws is a weaker predictor of DUI behavior than perceptions that driving high is unsafe. In addition, safety perceptions predict decreased openness to driving high while knowledge of DUI laws was not associated with openness. These findings suggest that interventions for reducing the incidence of marijuana DUI are likely to be more successful by targeting safety perceptions related to marijuana DUI rather than knowledge of DUI laws. We caution that because these data are limited to an online convenience sample, results may not be generalizable beyond our sample. PMID:26800209

  1. Correlates of Marijuana Drugged Driving and Openness to Driving While High: Evidence from Colorado and Washington.

    Directory of Open Access Journals (Sweden)

    Kevin C Davis

    with lower odds of each of these outcomes (OR = 0.63, P < 0.01, OR = 0.69, P = 0.02, respectively. Post-estimation Wald tests confirmed the negative associations with marijuana DUI were greater in magnitude for safety perceptions than knowledge of DUI laws. Increased perceptions that driving while high is unsafe was associated with significantly lower willingness to drive after using marijuana while increased knowledge of marijuana DUI laws was not associated with these outcomes.Despite recent interventions targeting public awareness of the legal consequences of marijuana DUI, our results suggest that knowledge of these laws is a weaker predictor of DUI behavior than perceptions that driving high is unsafe. In addition, safety perceptions predict decreased openness to driving high while knowledge of DUI laws was not associated with openness. These findings suggest that interventions for reducing the incidence of marijuana DUI are likely to be more successful by targeting safety perceptions related to marijuana DUI rather than knowledge of DUI laws. We caution that because these data are limited to an online convenience sample, results may not be generalizable beyond our sample.

  2. Treatment of open tibial fracture with bone defect caused by high velocity missiles: a case report.

    Science.gov (United States)

    Golubović, Zoran; Vukajinović, Zoran; Stojiljković, Predrag; Golubović, Ivan; Visnjić, Aleksandar; Radovanović, Zoran; Najman, Stevo

    2013-01-01

    Tibia fracture caused by high velocity missiles is mostly comminuted and followed by bone defect which makes their healing process extremely difficult and prone to numerous complications. A 34-year-old male was wounded at close range by a semi-automatic gun missile. He was wounded in the distal area of the left tibia and suffered a massive defect of the bone and soft tissue. After the primary treatment of the wound, the fracture was stabilized with an external fixator type Mitkovic, with convergent orientation of the pins. The wound in the medial region of the tibia was closed with the secondary stitch, whereas the wound in the lateral area was closed with the skin transplant after Thiersch. Due to massive bone defect in the area of the rifle-missile wound six months after injury, a medical team placed a reconstructive external skeletal fixator type Mitkovic and performed corticotomy in the proximal metaphyseal area of the tibia. By the method of bone transport (distractive osteogenesis), the bone defect of the tibia was replaced. After the fracture healing seven months from the secondary surgery, the fixator was removed and the patient was referred to physical therapy. Surgical treatment of wounds, external fixation, performing necessary debridement, adequate antibiotic treatment and soft and bone tissue reconstruction are essential in achieving good results in patients with the open tibial fracture with bone defect caused by high velocity missiles. Reconstruction of bone defect can be successfully treated by reconstructive external fixator Mitkovic.

  3. Achieving Energy Savings with Highly-Controlled Lighting in an Open-Plan Office

    Energy Technology Data Exchange (ETDEWEB)

    Rubinstein, Francis; Enscoe, Abby

    2010-04-19

    An installation in a Federal building tested the effectiveness of a highly-controlled, workstation-specific lighting retrofit. The study took place in an open-office area with 86 cubicles and low levels of daylight. Each cubicle was illuminated by a direct/indirectpendant luminaire with three 32 watt lamps, two dimmable DALI ballasts, and an occupancy sensor. A centralized control system programmed all three lamps to turn on and off according to occupancy on a workstation-by-workstation basis. Field measurements taken over the course of several monthsdemonstrated 40% lighting energy savings compared to a baseline without advanced controls that conforms to GSA's current retrofit standard. A photometric analysis found that the installation provided higher desktop light levels than the baseline, while an occupant survey found that occupants in general preferred the lighting system to thebaseline.Simple payback is fairly high; projects that can achieve lower installation costs and/or higher energy savings and those in which greenhouse gas reduction and occupant satisfaction are significant priorities provide the ideal setting for workstation-specific lighting retrofits.

  4. The Open Connectome Project Data Cluster: Scalable Analysis and Vision for High-Throughput Neuroscience.

    Science.gov (United States)

    Burns, Randal; Roncal, William Gray; Kleissas, Dean; Lillaney, Kunal; Manavalan, Priya; Perlman, Eric; Berger, Daniel R; Bock, Davi D; Chung, Kwanghun; Grosenick, Logan; Kasthuri, Narayanan; Weiler, Nicholas C; Deisseroth, Karl; Kazhdan, Michael; Lichtman, Jeff; Reid, R Clay; Smith, Stephen J; Szalay, Alexander S; Vogelstein, Joshua T; Vogelstein, R Jacob

    2013-01-01

    We describe a scalable database cluster for the spatial analysis and annotation of high-throughput brain imaging data, initially for 3-d electron microscopy image stacks, but for time-series and multi-channel data as well. The system was designed primarily for workloads that build connectomes- neural connectivity maps of the brain-using the parallel execution of computer vision algorithms on high-performance compute clusters. These services and open-science data sets are publicly available at openconnecto.me. The system design inherits much from NoSQL scale-out and data-intensive computing architectures. We distribute data to cluster nodes by partitioning a spatial index. We direct I/O to different systems-reads to parallel disk arrays and writes to solid-state storage-to avoid I/O interference and maximize throughput. All programming interfaces are RESTful Web services, which are simple and stateless, improving scalability and usability. We include a performance evaluation of the production system, highlighting the effec-tiveness of spatial data organization.

  5. HiGIS: An Open Framework for High Performance Geographic Information System

    Directory of Open Access Journals (Sweden)

    XIONG, W.

    2015-08-01

    Full Text Available Big data era expose many challenges to geospatial data management, geocomputation and cartography. There is no exception in geographic information systems (GIS community. Technologies and facilities of high performance computing (HPC become more and more feasible to researchers, while mobile computing, ubiquitous computing, and cloud computing are emerging. But traditional GIS need to be improved to take advantages of all these evolutions. We proposed and implemented a GIS married with high performance computing, which is called HiGIS. The goal of HiGIS is to promote the performance of geocomputation by leveraging the power of HPC, and to build an open framework for geospatial data storing, processing, displaying and sharing. In this paper the architecture, data model and modules of the HiGIS system are introduced. A geocomputation scheduling engine based on communicating sequential process was designed to exploit spatial analysis and processing. Parallel I/O strategy using file view was proposed to improve the performance of geospatial raster data access. In order to support web-based online mapping, an interactive cartographic script was provided to represent a map. A demostration of locating house was used to manifest the characteristics of HiGIS. Parallel and concurrency performance experiments show the feasibility of this system.

  6. Does human body odor represent a significant and rewarding social signal to individuals high in social openness?

    Directory of Open Access Journals (Sweden)

    Katrin T Lübke

    Full Text Available Across a wide variety of domains, experts differ from novices in their response to stimuli linked to their respective field of expertise. It is currently unknown whether similar patterns can be observed with regard to social expertise. The current study therefore focuses on social openness, a central social skill necessary to initiate social contact. Human body odors were used as social cues, as they inherently signal the presence of another human being. Using functional MRI, hemodynamic brain responses to body odors of women reporting a high (n = 14 or a low (n = 12 level of social openness were compared. Greater activation within the inferior frontal gyrus and the caudate nucleus was observed in high socially open individuals compared to individuals low in social openness. With the inferior frontal gyrus being a crucial part of the human mirror neuron system, and the caudate nucleus being implicated in social reward, it is discussed whether human body odor might constitute more of a significant and rewarding social signal to individuals high in social openness compared to individuals low in social openness process.

  7. Does human body odor represent a significant and rewarding social signal to individuals high in social openness?

    Science.gov (United States)

    Lübke, Katrin T; Croy, Ilona; Hoenen, Matthias; Gerber, Johannes; Pause, Bettina M; Hummel, Thomas

    2014-01-01

    Across a wide variety of domains, experts differ from novices in their response to stimuli linked to their respective field of expertise. It is currently unknown whether similar patterns can be observed with regard to social expertise. The current study therefore focuses on social openness, a central social skill necessary to initiate social contact. Human body odors were used as social cues, as they inherently signal the presence of another human being. Using functional MRI, hemodynamic brain responses to body odors of women reporting a high (n = 14) or a low (n = 12) level of social openness were compared. Greater activation within the inferior frontal gyrus and the caudate nucleus was observed in high socially open individuals compared to individuals low in social openness. With the inferior frontal gyrus being a crucial part of the human mirror neuron system, and the caudate nucleus being implicated in social reward, it is discussed whether human body odor might constitute more of a significant and rewarding social signal to individuals high in social openness compared to individuals low in social openness process.

  8. Origin of the high open circuit voltage in planar heterojunction perovskite solar cells: Role of the reduced bimolecular recombination

    Science.gov (United States)

    Yang, Wenchao; Yao, Yao; Wu, Chang-Qin

    2015-03-01

    The high open circuit voltage is an attractive feature for the currently popular organic-inorganic hybrid perovskite solar cells. In this paper, by employing the macroscopic device model simulation, we investigate its origin for the planar heterojunction perovskite solar cells. Based on the calculated current density-voltage characteristics, it is revealed that compared to the excitonic solar cells, the fast thermal-activated exciton dissociation in the bulk due to the small exciton binding energy may improve the short circuit current and the fill factor, but its beneficial role on the open circuit voltage is marginal. The most significant contribution for the open circuit voltage comes from the reduced bimolecular recombination. In the perovskites, with the recombination prefactor many orders of magnitude smaller than that based on the Langevin's theory, the internal charge density level is significantly enhanced and the density gradient is removed, leading to the high quasi-Fermi level splitting and thus the small open circuit voltage loss. For the nonradiative recombination pathway due to the deep trap states, it may induce significant loss of open circuit voltage as the trap density is high, while for the moderately low density its effect on the open circuit voltage is small and negligible.

  9. Unraveling the High Open Circuit Voltage and High Performance of Integrated Perovskite/Organic Bulk-Heterojunction Solar Cells.

    Science.gov (United States)

    Dong, Shiqi; Liu, Yongsheng; Hong, Ziruo; Yao, Enping; Sun, Pengyu; Meng, Lei; Lin, Yuze; Huang, Jinsong; Li, Gang; Yang, Yang

    2017-08-09

    We have demonstrated high-performance integrated perovskite/bulk-heterojunction (BHJ) solar cells due to the low carrier recombination velocity, high open circuit voltage (VOC), and increased light absorption ability in near-infrared (NIR) region of integrated devices. In particular, we find that the VOC of the integrated devices is dominated by (or pinned to) the perovskite cells, not the organic photovoltaic cells. A Quasi-Fermi Level Pinning Model was proposed to understand the working mechanism and the origin of the VOC of the integrated perovskite/BHJ solar cell, which following that of the perovskite solar cell and is much higher than that of the low bandgap polymer based organic BHJ solar cell. Evidence for the model was enhanced by examining the charge carrier behavior and photovoltaic behavior of the integrated devices under illumination of monochromatic light-emitting diodes at different characteristic wavelength. This finding shall pave an interesting possibility for integrated photovoltaic devices to harvest low energy photons in NIR region and further improve the current density without sacrificing VOC, thus providing new opportunities and significant implications for future industry applications of this kind of integrated solar cells.

  10. A sustainable business model for Open-Access journal publishing: a proposed plan for High-Energy Physics

    Directory of Open Access Journals (Sweden)

    Jens Vigen

    2008-01-01

    Full Text Available The High Energy Physics community over the last 15 years has achieved so-called full green Open Access through the wide dissemination of preprints via arXiv, a central subject repository managed by Cornell University. However, green Open Access does not alleviate the economic difficulties of libraries as they are still expected to offer access to versions of record of the peer-reviewed literature. For this reason the particle physics community is now addressing the issue of gold Open Access by converting a set of the existing core journals to Open Access. A Working Party has been established to bring together funding agencies, laboratories and libraries into a single consortium, called SCOAP3 (Sponsoring Consortium for Open Access Publishing in Particle Physics. This consortium will engage with publishers to build a sustainable model for Open Access publishing. In this model, subscription fees from multiple institutions are replaced by contracts with publishers of Open Access journals, where the SCOAP3 consortium is a single financial partner.

  11. Comparative evaluation of single-level closing-wedge vertebral osteotomies for the correction of fixed kyphotic deformity of the lumbar spine: a cadaveric study.

    Science.gov (United States)

    Li, F; Sagi, H C; Liu, B; Yuan, H A

    2001-11-01

    Anatomic study. To compare spinal osteotomies with respect to obtainable correction and change in anterior height and distance of the spinal column and to describe a modification of the decancellation closing-wedge osteotomy to obtain further correction. Fixed kyphotic deformity of the lumbar spine can cause difficulty with sitting, lying flat, and pain and can pose a risk to adjacent spinal cord and nerves as well as impair respiratory and abdominal function. Various corrective osteotomies have been described. Osteotomies involving decancellation and a closing wedge of the apical vertebra theoretically decrease the risk to anterior vascular structures. Single-level vertebral osteotomies were performed on three groups of fresh-frozen human cadaveric lumbar spines. Group 1 underwent a conventional anterior opening-wedge/posterior closing-wedge osteotomy, Group 2 underwent a conventional decancellation posterior closing-wedge osteotomy, and Group 3 underwent our modified decancellation posterior closing-wedge osteotomy. Sagittal plane angulation as well as anterior height and distance of the spinal column were measured before and after osteotomy. The mean correction was 38 degrees for Group 1, 36 degrees for Group 2, and 49 degrees for Group 3. The mean change in anterior height and distance was 20 and 30 mm, respectively, for Group 1. For Groups 2 and 3 it was only 2-4 mm. The authors recommend single-level posterior decancellation procedures for correction of fixed kyphotic deformities of the thoracolumbar spine to decrease the risk to anterior neurovascular structures. An additional 10-13 degrees of correction can be obtained with the authors' modification.

  12. Resilience of SAR11 bacteria to rapid acidification in the high-latitude open ocean.

    Science.gov (United States)

    Hartmann, Manuela; Hill, Polly G; Tynan, Eithne; Achterberg, Eric P; Leakey, Raymond J G; Zubkov, Mikhail V

    2016-02-01

    Ubiquitous SAR11 Alphaproteobacteria numerically dominate marine planktonic communities. Because they are excruciatingly difficult to cultivate, there is comparatively little known about their physiology and metabolic responses to long- and short-term environmental changes. As surface oceans take up anthropogenic, atmospheric CO2, the consequential process of ocean acidification could affect the global biogeochemical significance of SAR11. Shipping accidents or inadvertent release of chemicals from industrial plants can have strong short-term local effects on oceanic SAR11. This study investigated the effect of 2.5-fold acidification of seawater on the metabolism of SAR11 and other heterotrophic bacterioplankton along a natural temperature gradient crossing the North Atlantic Ocean, Norwegian and Greenland Seas. Uptake rates of the amino acid leucine by SAR11 cells as well as other bacterioplankton remained similar to controls despite an instant ∼50% increase in leucine bioavailability upon acidification. This high physiological resilience to acidification even without acclimation, suggests that open ocean dominant bacterioplankton are able to cope even with sudden and therefore more likely with long-term acidification effects.

  13. Mechanism of formation of subnanosecond current front in high-voltage pulse open discharge

    Science.gov (United States)

    Schweigert, I. V.; Alexandrov, A. L.; Zakrevsky, Dm. E.; Bokhan, P. A.

    2014-11-01

    The mechanism of subnanosecond current front rise observed previously in the experiment in high-voltage pulse open discharge in helium is studied in kinetic particle-in-cell simulations. The Boltzmann equations for electrons, ions, and fast atoms are solved self-consistently with the Poisson equations for the electrical potential. The partial contributions to the secondary electron emission from the ions, fast atoms, photons, and electrons, bombarding the electrode, are calculated. In simulations, as in the experiment, the discharge glows between two symmetrical cathodes and the anode grid in the midplane at P =6 Torr and the applied voltage of 20 kV. The electron avalanche development is considered for two experimental situations during the last stage of breakdown: (i) with constant voltage and (ii) with decreasing voltage. For case (i), the subnanosecond current front rise is set by photons from the collisional excitation transfer reactions. For the case (ii), the energetic electrons swamp the cathode during voltage drop and provide the secondary electron emission for the subnanosecond current rise, observed in the experiment.

  14. Screensaver: an open source lab information management system (LIMS for high throughput screening facilities

    Directory of Open Access Journals (Sweden)

    Nale Jennifer

    2010-05-01

    Full Text Available Abstract Background Shared-usage high throughput screening (HTS facilities are becoming more common in academe as large-scale small molecule and genome-scale RNAi screening strategies are adopted for basic research purposes. These shared facilities require a unique informatics infrastructure that must not only provide access to and analysis of screening data, but must also manage the administrative and technical challenges associated with conducting numerous, interleaved screening efforts run by multiple independent research groups. Results We have developed Screensaver, a free, open source, web-based lab information management system (LIMS, to address the informatics needs of our small molecule and RNAi screening facility. Screensaver supports the storage and comparison of screening data sets, as well as the management of information about screens, screeners, libraries, and laboratory work requests. To our knowledge, Screensaver is one of the first applications to support the storage and analysis of data from both genome-scale RNAi screening projects and small molecule screening projects. Conclusions The informatics and administrative needs of an HTS facility may be best managed by a single, integrated, web-accessible application such as Screensaver. Screensaver has proven useful in meeting the requirements of the ICCB-Longwood/NSRB Screening Facility at Harvard Medical School, and has provided similar benefits to other HTS facilities.

  15. Screensaver: an open source lab information management system (LIMS) for high throughput screening facilities

    Science.gov (United States)

    2010-01-01

    Background Shared-usage high throughput screening (HTS) facilities are becoming more common in academe as large-scale small molecule and genome-scale RNAi screening strategies are adopted for basic research purposes. These shared facilities require a unique informatics infrastructure that must not only provide access to and analysis of screening data, but must also manage the administrative and technical challenges associated with conducting numerous, interleaved screening efforts run by multiple independent research groups. Results We have developed Screensaver, a free, open source, web-based lab information management system (LIMS), to address the informatics needs of our small molecule and RNAi screening facility. Screensaver supports the storage and comparison of screening data sets, as well as the management of information about screens, screeners, libraries, and laboratory work requests. To our knowledge, Screensaver is one of the first applications to support the storage and analysis of data from both genome-scale RNAi screening projects and small molecule screening projects. Conclusions The informatics and administrative needs of an HTS facility may be best managed by a single, integrated, web-accessible application such as Screensaver. Screensaver has proven useful in meeting the requirements of the ICCB-Longwood/NSRB Screening Facility at Harvard Medical School, and has provided similar benefits to other HTS facilities. PMID:20482787

  16. Analysis and simulation of high strain compression of anisotropic open-cell elastic foams

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    By elongating the regular Kelvin model in one direction and keeping unchanged in the other two directions,the anisotropic model was constructed.Then,the simplified periodic structural cell was obtained according to the periodicity and symmetry of the model in the whole space.Using the half-strut element and elastic deflection theory to analyze the mechanical behavior as were adopted in the previous studies,this paper obtained the theoretical expressions for the compressive stress and strain as well as the corresponding curves in the rise and transverse directions.In addition,the theoretical results were examined by the finite element simulation.Results indicated that the theoretical analysis was very close to the finite element simulation when the strain was not too high,which confirmed the validity of theoretical analysis.At the same time,the anisotropy was shown to have a significant effect on the mechanical properties of open-cell foams.As the anisotropy ratio increased,the compressive stress was improved in the rise direction but dropped in the transverse direction under the same strain.

  17. Human Cytomegalovirus UL138 Open Reading Frame Is Highly Conserved in Clinical Strains

    Institute of Scientific and Technical Information of China (English)

    Ying Qi; Rong He; Yan-ping Ma; Zheng-rong Sun; Yao-hua Ji; Qiang Ruan

    2009-01-01

    To investigate the variability of human cytomegalovirus (HCMV) UL138 open reading flame (ORF) in clinical strains.Methods HCMV UL138 ORF was amplified by polymerase chain reaction (PCR) and PCR amplification products were sequenced directly, and the data were analyzed in 19 clinical strains.Results UL138 ORF in all 30 clinical strains was amplified successfully. Compared with that of Toledo strain, the nucleotide and amino acid sequence identities of UL138 ORF in all strains were 97.41% to 99.41% and 98.24% to 99.42%, respectively. All of the nucleotide mutations were substitutions. The spatial structure and post-translational modification sites of UL138 encoded proteins were conserved. The result of phylogenetic tree showed that HCMV UL138 sequence variations were not definitely related with different clinical symptoms.Conclusion HCMV UL138 ORF in clinical strains is high conservation, which might be helpful for UL138 encoded protein to play a role in latent infection of HCMV.

  18. Hydralazine-induced vasodilation involves opening of high conductance Ca2+-activated K+ channels

    DEFF Research Database (Denmark)

    Bang, Lone; Nielsen-Kudsk, J E; Gruhn, N

    1998-01-01

    The purpose of this study was to investigate whether high conductance Ca2+-activated K+ channels (BK(Ca)) are mediating the vasodilator action of hydralazine. In isolated porcine coronary arteries, hydralazine (1-300 microM), like the K+ channel opener levcromakalim, preferentially relaxed...... contractions induced by K+ (20 mM) compared with K+ (80 mM). In addition, concentration-relaxation curves for hydralazine (pD2 = 5.38 +/- 0.06; Emax = 85.9 +/- 3.6%) were shifted 10-fold to the right by the BK(Ca) blockers tetraethylammonium (1 mM) and iberiotoxin (0.1 microM). In contrast, nimodipine (a Ca2......+-entry blocker), relaxed contractions induced by K+ (20 mM) and K+ (80 mM) equally and nimodipine-induced relaxations were neither antagonized by tetraethylammonium nor by iberiotoxin. In isolated perfused rat hearts, hydralazine (1 microM) increased coronary flow by 28.8 +/- 2.7%. Iberiotoxin (0.1 micro...

  19. Open access high throughput drug discovery in the public domain: a Mount Everest in the making.

    Science.gov (United States)

    Roy, Anuradha; McDonald, Peter R; Sittampalam, Sitta; Chaguturu, Rathnam

    2010-11-01

    High throughput screening (HTS) facilitates screening large numbers of compounds against a biochemical target of interest using validated biological or biophysical assays. In recent years, a significant number of drugs in clinical trails originated from HTS campaigns, validating HTS as a bona fide mechanism for hit finding. In the current drug discovery landscape, the pharmaceutical industry is embracing open innovation strategies with academia to maximize their research capabilities and to feed their drug discovery pipeline. The goals of academic research have therefore expanded from target identification and validation to probe discovery, chemical genomics, and compound library screening. This trend is reflected in the emergence of HTS centers in the public domain over the past decade, ranging in size from modestly equipped academic screening centers to well endowed Molecular Libraries Probe Centers Network (MLPCN) centers funded by the NIH Roadmap initiative. These centers facilitate a comprehensive approach to probe discovery in academia and utilize both classical and cutting-edge assay technologies for executing primary and secondary screening campaigns. The various facets of academic HTS centers as well as their implications on technology transfer and drug discovery are discussed, and a roadmap for successful drug discovery in the public domain is presented. New lead discovery against therapeutic targets, especially those involving the rare and neglected diseases, is indeed a Mount Everestonian size task, and requires diligent implementation of pharmaceutical industry's best practices for a successful outcome.

  20. 脉冲 Er:YAG 激光与常规涡轮高速车针治疗楔状缺损的效果比较%The Effect Comparasion between the Pulse Er:YAG Laser and the Conventional Turbine High-speed Dental Bur to the Remedy of Teeth Wedge-shaped Defect

    Institute of Scientific and Technical Information of China (English)

    范伟; 贺慧霞

    2015-01-01

    目的:比较Er:YAG激光与常规涡轮机高速车针治疗楔状缺损的效果。方法收集我院口腔科就诊的、双侧多个同名牙楔状缺损患者85例382颗牙,随机分为激光组和涡轮机组各191牙,其中每位患者每侧至少2颗牙采用激光表面预备,对侧高速涡轮机预备,脉冲照射采用激光剂量为300 mJ,20 Hz间歇操作。涡轮机组采用高速车针制备固位型,自体对照,两组均预备后光固化树脂黏充填。比较两组治疗后1周、1个月、6个月、12个月术后充填物保存率、边缘着色、继发龋等指标,评价其临床治疗效果。结果两组术中疼痛牙齿发生率激光组(16.7%)显著少于涡轮机组(74.8%),差异有统计学意义(P<0.05);术后1周、1个月激光组分别有35牙和12牙出现冷热刺激痛,而涡轮机组发生刺激痛分别为83牙和44牙,两者差异有统计学意义( P<0.05);术后6个月和12个月修复体保存率激光组显著高于涡轮机组,差异有统计学意义( P<0.05);但边缘适合性、边缘着色和继发龋发生率两组差异无统计学意义。结论激光组较涡轮机组在楔状缺损治疗中疼痛发生率低、治疗后疼痛反应轻;修复体保存率高。300 mJ,20 Hz的Er:YAG激光治疗楔状缺损具有无痛、安全、高效的优点。%Objective To compare the effects of Er: YAG laser and conventional high-speed burr in treatment of wedge-shaped tooth defects and to evaluate its applicability and reliability .Methods 382 bilateral multiple teeth with wedge-shaped defects in 85 patients were randomly divided into two groups with 191 teeth in each:laser group and the turbine burr group .At least two teeth of one side in all patients were irradiated by pulsed Er:YAG laser with doses of 300 mj, 20 Hz.Meanwhile, the caries cavities on the contralateral were prepared by high-speed burr .Then the prepared caries defects in both

  1. Monte Carlo simulation of the Varian Clinac 600C accelerator dynamic and physical wedges

    Energy Technology Data Exchange (ETDEWEB)

    Soares, S [Universidade da Beira Interior, Av. Marques d' Avila e Bolama, Covilha 6201-001 (Portugal); Chaves, A [Instituto Portugues de Oncologia Doutor Francisco Gentil (IPO), Av. Bissaya Barreto, Coimbra 3000-075 (Portugal); Peralta, L [Laboratorio de Instrumentacao e Fisica Experimental de PartIculas (LIP), Av. Elias Garcia no14 1o, Lisbon 1000-149 (Portugal); Lopes, Mc [Faculdade de Ciencias da Universidade de Lisboa, Campo Grande EdifIcio C5, Lisbon 1149-016 (Portugal)

    2007-06-15

    The present paper describes the study done on the dosimetric characteristics of the Varian Clinac 600C dynamic wedges (DW) and their comparison with the physical wedges (PW) in terms of the differences affecting the dose distributions, beam spectra, energy fluence and angular distributions. The geometry of the 4 MV photon beam and the dose distributions in a water phantom were simulated with GEANT3 and DPM Monte Carlo code systems. The DW was modelled through the constant movement of the upper jaws. The depth dose distributions and lateral profiles for the DW, PW and open fields were measured and compared with the Monte Carlo simulations and the global agreement was found to be within 3%. It was also found that the effects of a DW on beam spectral and angular distributions are much less significant than those produced by a PW. For example, in our study we found out that the 45{sup 0}PW, when compared with the corresponding open field, can introduce a 30% increase in the mean photon energy due to the beam hardening effect and that it can also introduce a 4.5% dose reduction in the build-up region because of the reduction of the contaminated electrons by the PW. For the DW neither this mean-energy increase nor such dose reduction was found. The PW, when compared to the DW, significantly alters the photon-beam spectrum and these dosimetric differences are significant and further investigation must be performed to quantify the impact in clinical use of these beams.

  2. Nonsurgical treatment of adult open bite using edgewise appliance combined with high-pull headgear and class III elastics.

    Science.gov (United States)

    Saito, Isao; Yamaki, Masaki; Hanada, Kooji

    2005-03-01

    This case report describes the effect of a combination of high-pull headgear and Class III elastics on the nonsurgical treatment of an adult open bite. The 19-year 1-month-old Japanese female presented with the anterior open bite of 4.0 mm and mild crowding. She had a skeletal Class II but a Class III molar relationship due to a severe proclination of the mandibular dental arch. Unilateral congenital missing premolars caused a discrepancy between the facial and dental midline. After extraction of two premolars and the impacted mandibular third molars, nonsurgical therapy was performed using the standard edgewise appliance combined with a high-pull headgear and Class III elastics. The successful treatment outcome and stability of the final occlusion indicates that a combination of high-pull headgear and Class III elastics is one of the effective devices in the nonsurgical treatment of open bite and, is especially helpful in uprighting the mandibular dental arch.

  3. Electrodynamic Casimir Effect in a Medium-Filled Wedge II

    CERN Document Server

    Ellingsen, Simen Adnoy; Milton, Kimball A

    2009-01-01

    We consider the Casimir energy in a geometry of an infinite magnetodielectric wedge closed by a circularly cylindrical arc embedded in another magnetodielectric medium, under the condition that the speed of light be the same in both media. An expression for the Casimir energy corresponding to the arc is obtained and it is found that in the limit where the reflectivity of the boundaries tends to unity the finite part of the Casimir energy of a perfectly conducting wedge-shaped sheet closed by a circular cylinder is regained. The energy of the latter geometry possesses divergences due to the presence of sharp corners. We argue how this is a pathology of the assumption of ideal conductor boundaries, and that no analogous term enters in the present geometry.

  4. MHD Casson nanofluid flow past a wedge with Newtonian heating

    Science.gov (United States)

    Ahmad, Kartini; Hanouf, Zahir; Ishak, Anuar

    2017-02-01

    The problem of steady Casson nanofluid flow past a wedge is studied in this paper. The presence of magnetic field along with Newtonian heating at the surface is considered. The governing partial differential equations are first transformed into a set of nonlinear ordinary differential equations by similarity transformations, before being solved numerically using the Keller-box method. The effects of the wedge angle Ω from 0° (horizontal plate) to 180° (vertical plate) as well as of as the magnetic parameter M on the non-Newtonian fluid flow and heat transfer characteristics are investigated. It is found that the surface temperature is slightly higher for the flow over a horizontal plate compared to that over a vertical plate. It is also found that the magnetic field decreases the surface temperature but increases the skin friction. The flow of a Newtonian fluid is found to give higher skin friction as compared to that of Casson fluid.

  5. Wedge Diffraction as an Instance of Radiative Shielding

    CERN Document Server

    Grzesik, J A

    2016-01-01

    The celebrated Sommerfeld wedge diffraction solution is reexamined from a null interior field perspective. Exact surface currents provided by that solution, when considered as disembodied half-plane laminae radiating into an ambient, uniform space both inside and outside the wedge proper, do succeed in reconstituting both a specular, mirror field above the exposed face, and a shielding plane-wave field of a sign opposite to that of the incoming excitation which, under superposition, creates both the classical, geometric-optics shadow, and a strictly null interior field at the dominant, plane-wave level. Both mirror and shadow radiated fields are controlled by the residue at just one simple pole encountered during a spectral radiative field assembly, fixed in place by incidence direction $\\phi_{0}$ as measured from the exposed face. The radiated fields further provide diffractive contributions drawn from two saddle points that track observation angle $\\phi.$ Even these, more or less asymptotic contributions, a...

  6. Treatment of open tibial fracture with bone defect caused by high velocity missiles: A case report

    Directory of Open Access Journals (Sweden)

    Golubović Zoran

    2013-01-01

    Full Text Available Introduction .Tibia fracture caused by high velocity missiles is mostly comminuted and followed by bone defect which makes their healing process extremely difficult and prone to numerous complications. Case Outline. A 34-year-old male was wounded at close range by a semi-automatic gun missile. He was wounded in the distal area of the left tibia and suffered a massive defect of the bone and soft tissue. After the primary treatment of the wound, the fracture was stabilized with an external fixator type Mitkovic, with convergent orientation of the pins. The wound in the medial region of the tibia was closed with the secondary stitch, whereas the wound in the lateral area was closed with the skin transplant after Thiersch. Due to massive bone defect in the area of the rifle-missile wound six months after injury, a medical team placed a reconstructive external skeletal fixator type Mitkovic and performed corticotomy in the proximal metaphyseal area of the tibia. By the method of bone transport (distractive osteogenesis, the bone defect of the tibia was replaced. After the fracture healing seven months from the secondary surgery, the fixator was removed and the patient was referred to physical therapy. Conclusion. Surgical treatment of wounds, external fixation, performing necessary debridement, adequate antibiotic treatment and soft and bone tissue reconstruction are essential in achieving good results in patients with the open tibial fracture with bone defect caused by high velocity missiles. Reconstruction of bone defect can be successfully treated by reconstructive external fixator Mitkovic. [Projekat Ministarstva nauke Republike Srbije, br. III 41017 i br. III 41004

  7. Anomalous open-circuit voltage from a high-Tc superconducting dynamo

    Science.gov (United States)

    Bumby, C. W.; Jiang, Zhenan; Storey, J. G.; Pantoja, A. E.; Badcock, R. A.

    2016-03-01

    We report on the behavior of a high-Tc superconducting (HTS) homopolar dynamo which outputs a DC open-circuit voltage when the stator is in the superconducting state, but behaves as a conventional AC alternator when the stator is in the normal state. We observe that this time-averaged DC voltage arises from a change in the shape of the AC voltage waveform that is obtained from a normal conducting stator. The measured DC voltage is proportional to frequency, and decreases with increasing flux gap between the rotor magnet and the HTS stator wire. We observe that the DC output voltage decreases to zero at large flux gaps, although small differences between the normal-conducting and superconducting waveforms are still observed, which we attribute to screening currents in the HTS stator wire. Importantly, the normalised pulse shape is found to be a function of the rotor position angle only. Based on these observations, we suggest that the origin of this unexpected DC effect can be explained by a model first proposed by Giaever, which considers the impact of time-varying circulating eddy currents within the HTS stator wire. Such circulating currents form a superconducting shunt path which "short-circuits" the high field region directly beneath the rotor magnet, at those points in the cycle when the rotor magnet partially overlaps the superconducting stator wire. This reduces the output voltage from the device during these periods of the rotor cycle, leading to partial rectification of the output voltage waveform and hence the emergence of a time-averaged DC voltage.

  8. Modal Analysis in Lined Wedge-Shaped Ducts

    Science.gov (United States)

    Mechel, F. P.

    1998-10-01

    It has been suggested to describe the sound field in a wedge-shaped duct in a cylindrical co-ordinate system in which the boundaries of the wedge lie in a co-ordinate surface. This suggestion was developed in a companion paper [1]. The wave equation can be separated only if the boundaries are ideally reflecting (rigid or soft). Two solutions were proposed in reference [1] for absorbing boundaries. In the first solution the sound field is composed of “ideal modes” (modes in a wedge with ideally reflecting boundaries); the boundary condition at the absorbing boundary then leads to a system of equations for the mode amplitudes. The problem with this method lies in the fact that there is no radial orthogonality of the ideal modes so that the precision of the field synthesis by ideal modes is doubtful. In the second method in reference [1] one defines “fictitious modes” which satisfy the boundary conditions at the flanks exactly and which are based on hypergeometric functions as radial functions, but which produce a “rest” in the wave equation. It was described how this rest can be minimized; this procedure leads to slow numerical integrations. In the present paper, the wedge is subdivided into duct sections with parallel walls (the boundary is stepped); the fields in the sections are composed of duct modes (modes in a straight lined duct); the mode amplitudes are determined from the boundary conditions at the section limits. The advantages of the present method are (analytically) the duct modes are orthogonal across the sections, so the mode amplitudes can be determined with the usual precision of a modal analysis, and (numerically) no numerical integrations are needed.

  9. Large scale test of wedge shaped micro strip gas counters

    Energy Technology Data Exchange (ETDEWEB)

    Ackermann, M.; Atz, S.; Aulchenko, V.; Bachmann, S.; Baiboussinov, B.; Barthe, S.; Beaumont, W.; Beckers, T.; Beissel, F.; Benhammou, Y.; Bergdolt, A.M.; Bernier, K.; Bluem, P.; Bondar, A.; Bouhali, O.; Boulogne, I.; Bozzo, M.; Brom, J.M.; Camps, C.; Chorowicz, V.; Coffin, J.; Commichau, V.; Contardo, D.; Croix, J.; Troy, J. de; Drouhin, F.; Eberle, H.; Fluegge, G.; Fontaine, J.-C.; Geist, W.; Goerlach, U.; Gundlfinger, K.; Hangarter, K.; Haroutunian, R.; Helleboid, J.M.; Henkes, Th.; Hoffer, M.; Hoffman, C.; Huss, D.; Ischebeck, R.; Jeanneau, F.; Juillot, P.; Junghans, S.; Kapp, M.R.; Kaercher, K.; Knoblauch, D.; Kraeber, M.; Krauth, M.; Kremp, J.; Lounis, A.; Luebelsmeyer, K.; Maazouzi, C.; Macke, D.; Metri, R.; Mirabito, L.; Mueller, Th.; Nagaslaev, V.; Neuberger, D.; Nowack, A.; Pallares, A.; Pandoulas, D.; Petertill, M.; Pooth, O.; Racca, C.; Ripp, I.; Ruoff, E.; Sauer, A.; Schmitz, P.; Schulte, R.; Schultz von Dratzig, A.; Schunk, J.P.; Schuster, G.; Schwaller, B.; Shektman, L.; Siedling, R.; Sigward, M.H.; Simonis, H.J.; Smadja, G.; Stefanescu, J.; Szczesny, H.; Tatarinov, A.; Thuemmel, W.H.; Tissot, S.; Titov, V.; Todorov, T.; Tonutti, M.; Udo, F.; Velde, C. Vander. E-mail: vandervelde@hep.iihe.ac.be; Doninck, W. van; Dyck, Ch. van; Vanlaer, P.; Lancker, L. van; Verdini, P.G.; Weseler, S.; Wittmer, B.; Wortmann, R.; Zghiche, A.; Zhukov, V

    1999-11-01

    In order to check the system aspects of the forward-backward MSGC tracker designed for the future CMS experiment at LHC, 38 trapezoidal MSGC counters assembled in six multi-substrates detector modules were built and exposed to a muon beam at the CERN SPS. Results on the gain uniformity along the wedge-shaped strip pattern and across the detector modules are shown together with measurements of the detection efficiency and the spatial resolution.

  10. Large scale test of wedge shaped micro strip gas counters

    CERN Document Server

    Ackermann, M; Aulchenko, V M; Bachmann, S; Baibusinov, B O; Barthe, S; Beaumont, W; Beckers, T; Beissel, F; Benhammou, Ya; Bergdolt, A M; Bernier, K; Blüm, H P; Bondar, A E; Bouhali, O; Boulogne, I; Bozzo, M; Brom, J M; Camps, C; Chorowicz, V; Coffin, J P; Commichau, V; Contardo, D; Croix, J; De Troy, J G; Drouhin, F; Eberle, H; Flügge, G; Fontaine, J C; Geist, Walter M; Goerlach, U; Gundlfinger, K; Hangarter, K; Haroutunian, R; Helleboid, J M; Henkes, T; Hoffer, M; Hoffmann, C; Huss, D; Ischebeck, R; Jeanneau, F; Juillot, P; Junghans, S; Kapp, M R; Kärcher, K; Knoblauch, D; Kräber, M H; Krauth, M; Kremp, J; Lounis, A; Lübelsmeyer, K; Maazouzi, C; Macke, D; Metri, R; Mirabito, L; Müller, T; Nagaslaev, V; Neuberger, D; Nowak, A; Pallarès, A; Pandoulas, D; Petertill, M; Pooth, O; Racca, C; Ripp, I; Ruoff, E; Sauer, A; Schmitz, P; Schulte, R; Schultz von Dratzig, A; Schunk, J P; Schuster, G; Schwaller, B; Shekhtman, L I; Siedling, R; Sigward, M H; Simonis, H J; Smadja, G; Stefanescu, J; Szczesny, H; Tatarinov, A A; Thümmel, W H; Tissot, S; Titov, V; Todorov, T; Tonutti, M; Udo, Fred; Van der Velde, C; Van Doninck, W K; Van Dyck, C; Vanlaer, P; Van Lancker, L; Verdini, P G; Weseler, S; Wittmer, B; Wortmann, R; Zghiche, A; Zhukov, V

    1999-01-01

    In order to check the system aspects of the forward-backward MSGC tracker designed for the future CMS experiment at LHC, 38 trapezoidal MSGC counters assembled in six multi-substrates detector modules were built and exposed to a muon beam at the CERN SPS. Results on the gain uniformity along the wedge-shaped strip pattern and across the detector modules are shown together with measurements of the detection efficiency and the spatial resolution. (8 refs).

  11. DNS of compressible turbulent boundary layer over a blunt wedge

    Institute of Scientific and Technical Information of China (English)

    LI Xinliang; FU Dexun; MA Yanwan

    2005-01-01

    Direct numerical simulation of spatially evolving compressible boundary layer over a blunt wedge is performed in this paper. The free-stream Mach number is 6 and the disturbance source produced by wall blowing and suction is located downstream of the sound-speed point. Statistics are studied and compared with the results in incompressible flat-plate boundary layer. The mean pressure gradient effects on the vortex structure are studied.

  12. Water-saturated physical modeling of accretionary wedges

    Science.gov (United States)

    Yamada, Y.; Zhang, M.; Nakajima, H.; Driss, E.

    2005-12-01

    Accretionary wedges have been an important research target from view points of earthquake mechanism at the subduction zone, sediment deformation that is closely coupled with hydrology, and resource exploration such as methane hydrates. The knowledge obtained from the study may also be useful for site selection of geological disposal of hazardous materials including radioactive nuclear wastes, in coastal areas of tectonically unstable island arc systems like Japan. The wedges have been well-investigated with analogue models in particular sandbox experiments that typically use dry granular materials, thus the inter-granular pore space of the sandbox experiments is filled with air. In natural sediments, however, the pore space is filled with formation water and its pressure has special effects on structural development. In order to accurately simulate the in-situ conditions and to examine the effects of water on the deformation process of accretionary wedge, a new apparatus was recently constructed in AIST, Japan, to perform physical analog experiments of accretionary wedges under water-saturated condition. For comparisons, equivalent experiments with dry materials were also conducted. The physical properties of the materials were also measured with tri-axial compression tests to interpret the experimental observations. Preliminary results obtained from this study showed that the fundamental parameters on structural geometry, such as taper angle and fault spacing, can be correlated well in wet and dry experiments. These are also in good agreement with physical properties obtained by the tri-axial compression tests, suggesting that the internal friction coefficient decreases as the overburden pressure increases. In the under water models, buoyancy decreases apparent grain density and overburden pressure thus the internal friction coefficient also decreases. This also agrees with the structural geometry of the experimental results. These results suggest that under

  13. Wedge-local quantum fields on a nonconstant noncommutative spacetime

    Energy Technology Data Exchange (ETDEWEB)

    Much, A. [Max-Planck-Institute for Mathematics in the Sciences, 04103 Leipzig (Germany) and Institute for Theoretical Physics, University of Leipzig, 04009 Leipzig (Germany)

    2012-08-15

    Within the framework of warped convolutions we deform the massless free scalar field. The deformation is performed by using the generators of the special conformal transformations. The investigation shows that the deformed field turns out to be wedge-local. Furthermore, it is shown that the spacetime induced by the deformation with the special conformal operators is nonconstant noncommutative. The noncommutativity is obtained by calculating the deformed commutator of the coordinates.

  14. A cluster randomised stepped wedge trial to evaluate the effectiveness of a multifaceted information technology-based intervention in reducing high-risk prescribing of non-steroidal anti-inflammatory drugs and antiplatelets in primary medical care: The DQIP study protocol

    Directory of Open Access Journals (Sweden)

    Dreischulte Tobias

    2012-03-01

    Full Text Available Abstract Background High-risk prescribing of non-steroidal anti-inflammatory drugs (NSAIDs and antiplatelet agents accounts for a significant proportion of hospital admissions due to preventable adverse drug events. The recently completed PINCER trial has demonstrated that a one-off pharmacist-led information technology (IT-based intervention can significantly reduce high-risk prescribing in primary care, but there is evidence that effects decrease over time and employing additional pharmacists to facilitate change may not be sustainable. Methods/design We will conduct a cluster randomised controlled with a stepped wedge design in 40 volunteer general practices in two Scottish health boards. Eligible practices are those that are using the INPS Vision clinical IT system, and have agreed to have relevant medication-related data to be automatically extracted from their electronic medical records. All practices (clusters that agree to take part will receive the data-driven quality improvement in primary care (DQIP intervention, but will be randomised to one of 10 start dates. The DQIP intervention has three components: a web-based informatics tool that provides weekly updated feedback of targeted prescribing at practice level, prompts the review of individual patients affected, and summarises each patient's relevant risk factors and prescribing; an outreach visit providing education on targeted prescribing and training in the use of the informatics tool; and a fixed payment of 350 GBP (560 USD; 403 EUR up front and a small payment of 15 GBP (24 USD; 17 EUR for each patient reviewed in the 12 months of the intervention. We hypothesise that the DQIP intervention will reduce a composite of nine previously validated measures of high-risk prescribing. Due to the nature of the intervention, it is not possible to blind practices, the core research team, or the data analyst. However, outcome assessment is entirely objective and automated. There will

  15. On the acoustic wedge design and simulation of anechoic chamber

    Science.gov (United States)

    Jiang, Changyong; Zhang, Shangyu; Huang, Lixi

    2016-10-01

    This study proposes an alternative to the classic wedge design for anechoic chambers, which is the uniform-then-gradient, flat-wall (UGFW) structure. The working mechanisms of the proposed structure and the traditional wedge are analyzed. It is found that their absorption patterns are different. The parameters of both structures are optimized for achieving minimum absorber depth, under the condition of absorbing 99% of normal incident sound energy. It is found that, the UGFW structure achieves a smaller total depth for the cut-off frequencies ranging from 100 Hz to 250 Hz. This paper also proposes a modification for the complex source image (CSI) model for the empirical simulation of anechoic chambers, originally proposed by Bonfiglio et al. [J. Acoust. Soc. Am. 134 (1), 285-291 (2013)]. The modified CSI model considers the non-locally reactive effect of absorbers at oblique incidence, and the improvement is verified by a full, finite-element simulation of a small chamber. With the modified CSI model, the performance of both decorations with the optimized parameters in a large chamber is simulated. The simulation results are analyzed and checked against the tolerance of 1.5 dB deviation from the inverse square law, stipulated in the ISO standard 3745(2003). In terms of the total decoration depth and anechoic chamber performance, the UGFW structure is better than the classic wedge design.

  16. Wave dynamic processes in cellular detonation reflection from wedges

    Institute of Scientific and Technical Information of China (English)

    Zongmin Hu; Zonglin Jiang

    2007-01-01

    When the cell width of the incident deto-nation wave (IDW) is comparable to or larger than theMach stem height,self-similarity will fail during IDWreflection from a wedge surface.In this paper,the det-onation reflection from wedges is investigated for thewave dynamic processes occurring in the wave front,including transverse shock motion and detonation cellvariations behind the Mach stem.A detailed reactionmodel is implemented to simulate two-dimensional cel-lular detonations in stoichiometric mixtures of H2/O2diluted by Argon.The numerical results show that thetransverse waves,which cross the triple point trajec-tory of Mach reflection,travel along the Mach stem andreflect back from the wedge surface,control the size ofthe cells in the region swept by the Mach stem.It is theenergy carried by these transverse waves that sustainsthe triple-wave-collision with a higher frequency withinthe over-driven Mach stem.In some cases,local wavedynamic processes and wave structures play a dominantrole in determining the pattern of cellular record,lead-ing to the fact that the cellular patterns after the Machstem exhibit some peculiar modes.

  17. Observations of the Columbia River salt wedge and estuarine turbidity maximum using AUVs

    Science.gov (United States)

    McNeil, C. L.; Shcherbina, A.; Litchendorf, T.; Sanford, T. B.; Martin, D.; Baptista, A. M.; Lopez, J.; Crump, B.

    2012-12-01

    We present detailed observations of the salt wedge and estuarine turbidity maxima (ETM) in the North Channel of the Columbia River estuary (OR, USA) under conditions of high river discharge during May 2012. Measurements were made using two REMUS-100 autonomous underwater vehicles (AUVs; Hydroid, Inc.) equipped with SBE-49 CTDs (Seabird-Electronics, Inc.) for water temperature and salinity, upward/downward looking ADCPs (Teledyne RDI, Inc.) for currents, and ECO Puck triplets (WET Labs, Inc.) for optical backscatter measurement of turbidity. The acoustic backscatter intensity from the ADCP was also used as a proxy measurement for suspended sediments and was found to correlate quite well with the optical backscatter measurements. Daily forecasts of tidal currents in the estuary were used to simulate the AUV path in advance of deployment to aid data collection. Repeat AUV sections were made along and across the channel during flood tide. The turbidity and height above riverbed of the bottom boundary layer was observed to increase toward the deeper waters at the center of the channel. An ETM-like feature was observed ahead of the advancing salt wedge front with locally higher turbidity levels, presumably the result of flocculation and resuspension. To visualize better the repeat section measurements we made data movies. Each frame of the movie is our best estimate of a synoptic snapshot of along-section tracer distribution at a given point in time. These snapshots were created by re-location of non-synoptic AUV measurements to account for the advection of water parcels. An example data movie showing the intrusion of the salt wedge during the flood tide will be presented.

  18. Numerical modeling of mantle wedge processes and exhumation of UHP mantle in subduction zones

    Science.gov (United States)

    Gorczyk, W.; Gerya, T. V.; Guillot, S.; Connolly, J. A.; Yuen, D.

    2007-12-01

    The upwelling of subduction generated partially molten rocks is potentially a mechanism for the exhumation of UHP rocks through the mantle wedge. We investigated this processes using a 2-D coupled petrological- thermomechanical model that incorporates slab dehydration and water transport as well as partial melting of mantle and crustal rocks. This approach allows us to study the dynamics of mantle wedge processes including evolution of partially molten plumes and their interaction with surrounding dry mantle. To study the internal structure of the plumes we used ultra-high resolution numerical simulations with 10 billion active markers to detail the internal structure of natural plumes originating from the slab. The plumes consist of partially molten hydrated peridotite, dry solid mantle and subducted oceanic crust, which may comprise up to 12 volume % of the plume. As the plumes grow and mature these materials mix chaotically resulting in attenuation and duplication of the original layering on scales of 1-1000 m. Comparison of numerical results with geological observations from the Horoman ultramafic complex in Japan suggests that mixing and differentiation processes related to development of partially molten plumes above slabs may be responsible for strongly layered lithologically mixed (marble cake) structure of asthenospheric mantle wedges. The recent discovery of garnet bearing peridotites in the subduction zone of the Great Antilles in Hispaniola has raised questions about the process that leads to their exhumation. To evaluate whether upwelling plumes are a plausible exhumation mechanism we investigated the dynamics of subduction of slow spreading ridges. The results show that subduction of strongly serpentinized oceanic plate causes strong dehydration of the slab and leads to a rheological weakening of the interface between subducting and overriding plate. This weakening triggers trench retreat and massive asthenospheric upwelling into the gap between the

  19. Theoretical and experimental investigation of a new CFRP tendon wedge-anchor%新型CFRP筋夹片式锚具理论与试验研究

    Institute of Scientific and Technical Information of China (English)

    诸葛萍; 强士中

    2011-01-01

    A new theory for CFRP tendon wedge-anchor was presented and a new CFRP tendon wedge-anchor system was developed. The wedge-anchor system consists of a soft metal (aluminum alloy or copper) sleeve coated with sand, four steel wedges and a stee} barrel. In the theoretical analysis, the anchor components were divided into segments along the length, and the analytical modes of all components are established with the independence between the four wedges considered. The anchorage performance was evaluated through static test. Analytical and test results for the stress of the barrel were compared. The results show that the theory can evaluate the stress and transverse displacement and provide a reasonable prediction for the carrying capacity of the wedge-anchor system. The wedge-anchor can be applied to anchor high strength CFRP tendons, the average anchorage efficiency coefficient of the wedge-anchor system was as high as 94.9% in the test, and the wedge-anchor system is reliable.%提出CFRP筋夹片式锚具新的计算理论,并以此理论为依据设计一种新型CFRP筋夹片式锚具,它由锚杯、四片式夹片、涂砂铝套管或涂砂铜套管组成。在理论推导过程中,将夹片式锚具各组件在长度方向上分成多个等份,对其中各组件任意等份建立力学计算模型,并考虑各夹片间的独立性;通过静载试验对夹片式锚具的锚固性能进行测试,并分析比较锚杯拉应力的理论计算与试验实测结果。结果表明,该CFRP筋夹片式锚具计算理论能计算锚具各点的应力及横向位移,并能预测锚具极限承载力;此夹片式锚具适用于锚固高强CFRP筋,它的平均锚固效率系数达到94.9%,且性能稳定;锚杯拉应力的理论计算与试验实测结果较吻合。

  20. Linear array measurements of enhanced dynamic wedge and treatment planning system (TPS) calculation for 15 MV photon beam and comparison with electronic portal imaging device (EPID) measurements

    Science.gov (United States)

    Petrovic, Borislava; Grzadziel, Aleksandra; Rutonjski, Laza; Slosarek, Krzysztof

    2010-01-01

    Introduction. Enhanced dynamic wedges (EDW) are known to increase drastically the radiation therapy treatment efficiency. This paper has the aim to compare linear array measurements of EDW with the calculations of treatment planning system (TPS) and the electronic portal imaging device (EPID) for 15 MV photon energy. Materials and methods. The range of different field sizes and wedge angles (for 15 MV photon beam) were measured by the linear chamber array CA 24 in Blue water phantom. The measurement conditions were applied to the calculations of the commercial treatment planning system XIO CMS v.4.2.0 using convolution algorithm. EPID measurements were done on EPID-focus distance of 100 cm, and beam parameters being the same as for CA24 measurements. Results Both depth doses and profiles were measured. EDW linear array measurements of profiles to XIO CMS TPS calculation differ around 0.5%. Profiles in non-wedged direction and open field profiles practically do not differ. Percentage depth doses (PDDs) for all EDW measurements show the difference of not more than 0.2%, while the open field PDD is almost the same as EDW PDD. Wedge factors for 60 deg wedge angle were also examined, and the difference is up to 4%. EPID to linear array differs up to 5%. Conclusions The implementation of EDW in radiation therapy treatments provides clinicians with an effective tool for the conformal radiotherapy treatment planning. If modelling of EDW beam in TPS is done correctly, a very good agreement between measurements and calculation is obtained, but EPID cannot be used for reference measurements. PMID:22933916

  1. Linear array measurements of enhanced dynamic wedge and treatment planning system (TPS) calculation for 15 MV photon beam and comparison with electronic portal imaging device (EPID) measurements.

    Science.gov (United States)

    Petrovic, Borislava; Grzadziel, Aleksandra; Rutonjski, Laza; Slosarek, Krzysztof

    2010-09-01

    Enhanced dynamic wedges (EDW) are known to increase drastically the radiation therapy treatment efficiency. This paper has the aim to compare linear array measurements of EDW with the calculations of treatment planning system (TPS) and the electronic portal imaging device (EPID) for 15 MV photon energy. The range of different field sizes and wedge angles (for 15 MV photon beam) were measured by the linear chamber array CA 24 in Blue water phantom. The measurement conditions were applied to the calculations of the commercial treatment planning system XIO CMS v.4.2.0 using convolution algorithm. EPID measurements were done on EPID-focus distance of 100 cm, and beam parameters being the same as for CA24 measurements. Both depth doses and profiles were measured. EDW linear array measurements of profiles to XIO CMS TPS calculation differ around 0.5%. Profiles in non-wedged direction and open field profiles practically do not differ. Percentage depth doses (PDDs) for all EDW measurements show the difference of not more than 0.2%, while the open field PDD is almost the same as EDW PDD. Wedge factors for 60 deg wedge angle were also examined, and the difference is up to 4%. EPID to linear array differs up to 5%. The implementation of EDW in radiation therapy treatments provides clinicians with an effective tool for the conformal radiotherapy treatment planning. If modelling of EDW beam in TPS is done correctly, a very good agreement between measurements and calculation is obtained, but EPID cannot be used for reference measurements.

  2. Lamina cribrosa defects and optic disc morphology in primary open angle glaucoma with high myopia.

    Directory of Open Access Journals (Sweden)

    Yugo Kimura

    Full Text Available PURPOSE: To investigate whether lamina cribrosa (LC defects are associated with optic disc morphology in primary open angle glaucoma (POAG eyes with high myopia. METHODS: A total of 129 POAG patients and 55 age-matched control subjects with high myopia were evaluated. Three-dimensional scan images obtained by swept source optical coherence tomography were used to detect LC defects. Radial B-scans and infrared images obtained by spectral domain optical coherence tomography were used to measure β-peripapillary atrophy (PPA lengths with and without Bruch's membrane (BM (temporal, nasal, superior, and inferior, tilt angle (vertical and horizontal, and disc diameter (transverse and longitudinal. Peripapillary intrachoroidal cavitations (PICCs, disc area, ovality index, and cyclotorsion of the optic disc were analyzed as well. RESULTS: LC defects were found in 70 of 129 (54.2% POAG eyes and 1 of 55 (1.8% control eyes (P < 0.001. Age, sex, spherical equivalent, axial length, intraocular pressure, and central corneal thickness were not significantly different among POAG eyes with LC defects, POAG eyes without LC defects, and control eyes. Temporal PPA lengths without BM in all three groups correlated significantly with vertical and horizontal tilt angles, although no PPA length with BM correlated significantly with any tilt angle. PICCs were detected more frequently in POAG eyes with LC defects than those without LC defects (P = 0.01 and control eyes (P = 0.02. POAG eyes with LC defects showed a smaller ovality index (P = 0.004, longer temporal PPA without BM (P < 0.001, and larger vertical/horizontal tilt angles (vertical, P < 0.001; horizontal, P = 0.01, and transverse diameter (P = 0.01. In multivariate analysis for the presence of LC defects, presence of POAG (P < 0.001 and vertical tilt angle (P < 0.001 were identified as significant. CONCLUSIONS: The presence of LC defects was associated with myopic optic disc morphology in POAG eyes with high

  3. Symmetry-adapted perturbation theory utilizing density functional description of monomers for high-spin open-shell complexes.

    Science.gov (United States)

    Zuchowski, Piotr S; Podeszwa, Rafał; Moszyński, Robert; Jeziorski, Bogumił; Szalewicz, Krzysztof

    2008-08-28

    We present an implementation of symmetry-adapted perturbation theory (SAPT) to interactions of high-spin open-shell monomers forming high-spin dimers. The monomer spin-orbitals used in the expressions for the electrostatic and exchange contributions to the interaction energy are obtained from density functional theory using a spin-restricted formulation of the open-shell Kohn-Sham (ROKS) method. The dispersion and induction energies are expressed through the density-density response functions predicted by the time-dependent ROKS theory. The method was applied to several systems: NH...He, CN...Ne, H2O...HO2, and NH...NH. It provides accuracy comparable to that of the best previously available methods such as the open-shell coupled-cluster method with single, double, and noniterative triple excitations, RCCSD(T), with a significantly reduced computational cost.

  4. Control of structural inheritance on thrust initiation and material transfer in accretionary wedges

    Science.gov (United States)

    Leever, Karen; Geersen, Jacob; Ritter, Malte; Lieser, Kathrin; Behrmann, Jan

    2016-04-01

    Faults in the incoming sediment layer are commonly observed in subduction zone settings and well developed in the incoming plate off Sumatra. To investigate how they affect the structural development of the accretionary wedge, we conducted a series of 2D analogue tectonic experiments in which a 2 cm thick quartz sand layer on top of a thin detachment layer of glass beads was pulled against a rigid backstop by a basal conveyor belt in a 20cm wide box with glass walls. A gap at the base of the back wall avoids entrainment of the glass beads. At regular spacing of either 2.3, 5.5 or 7.8 cm (fractions of the thrust sheet length in the reference model), conjugate pairs of weakness zones dipping 60deg were created by cutting the sand layer with a thin (1 mm) metal blade. Both the undisturbed sand and the pre-cuts have an angle of internal friction of ~29o, but their cohesion is different by 50 Pa (110 Pa for the undisturbed material, 60 Pa along the pre-cuts). Friction of the glass beads is ~24deg. The experiments are monitored with high resolution digital cameras; displacement fields derived from digital image correlation are used to constrain fault activity. In all experiments, a critically tapered wedge developed with a surface slope of 7.5deg. In the reference model (no weakness zones in the input section), the position of new thrust faults is controlled by the frontal slope break. The average length of the thrust sheets is 11 cm and the individual thrusts accommodate on average 8 cm displacement each. The presence of weakness zones causes thrust initiation at a position different from the reference case, and affects their dip. For a fault spacing of 7.8 cm (or 75% of the reference thrust sheet length), every single incoming weakness zone causes the formation of a new thrust, thus resulting in thrust sheets shorter than the equilibrium case. In addition, less displacement is accommodated on each thrust. As a consequence, the frontal taper is smaller than expected

  5. HIGH VARIABILITY OF HUMAN CYTOMEGALOVIRUS UL150 OPEN READING FRAME IN LOW-PASSAGED CLINICAL ISOLATES

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Objective To investigate the polymorphism of human cytomegalovirus (HCMV) UL150 open reading frame(ORF) in low-passaged clinical isolates, and to study the relationship between the polymorphism and different pathogenesis of congenital HCMV infection.Methods PCR was performed to amplify the entire HCMV UL150 ORF region of 29 clinical isolates, which hadbeen proven containing detectable HCMV-DNA using fluorescence quantitative PCR. PCR amplifcation products weresequenced directly, and the data were analyzed.Results Totally 25 among 29 isolates were amplified, and 18 isolates were sequenced successfully. HCMVUL150 ORF sequences derived from congenitally infected infants were high variability. The UL150 ORF in all 18 clinical isolates shifted backward by 8 nucleotides leading to frame-shift, and contained a single nucleotide deletion at nucleotide position 226 compared with that of Toledo strain. The nucleotide diversity was 0. 1% to 6. 8% and the amino acid diversity was 0. 2% to 19. 2% related to Toledo strain. However, the nucleotide diversity was 0. 1% to 6.4% and amino acid diversity was 0. 2% to 8.3% by compared with Merlin strain. Compared with Toledo, 4 new cysteine residues and 13 additional posttranslational modification sites were observed in UL150 putative proteins of clinical isolates. Moreover, the UL150 putative protein contained an additional transmembrane helix at position of 4-17 amino acid related to Toledo.Conclusion HCMV UL150 ORF and deduced amino acid sequences of clinical strains are hypervariability. No obvious linkage between the polymorphism and different pathogenesis of congenital HCMV infection is found.

  6. High performance PEMFC stack with open-cathode at ambient pressure and temperature conditions

    Energy Technology Data Exchange (ETDEWEB)

    Santa Rosa, D.T.; Pinto, D.G.; Silva, V.S. [SRE - Solucoes Racionais de Energia, S.A., Poligono Industrial do Alto do Ameal, Ramalhal (Portugal); Silva, R.A.; Rangel, C.M. [INETI, Unidade de Electroquimica de Materiais, Lisboa (Portugal)

    2007-12-15

    An open-air cathode proton exchange membrane fuel cell (PEMFC) was developed. This paper presents a study of the effect of several critical operating conditions on the performance of an 8-cell stack. The studied operating conditions such as cell temperature, air flow rate and hydrogen pressure and flow rate were varied in order to identify situations that could arise when the PEMFC stack is used in low-power portable PEMFC applications. The stack uses an air fan in the edge of the cathode manifolds, combining high stoichiometric oxidant supply and stack cooling purposes. In comparison with natural convection air-breathing stacks, the air dual-function approach brings higher stack performances, at the expense of having a lower use of the total stack power output. Although improving the electrochemical reactions kinetics and decreasing the polarization effects, the increase of the stack temperature lead to membrane excessive dehydration (loss of sorbed water), increasing the ohmic resistance of the stack (lower performance). The results show that the stack outputs a maximum power density of 310mW/cm{sup 2} at 790mA/cm{sup 2} when operating at ambient temperature, atmospheric air pressure, self-humidifying, air fan voltage at 5.0 V and 250 mbar hydrogen relative pressure. For the studied range of hydrogen relative pressure (150-750 mbar), it is found that the stack performance is practically not affected by this operation condition, although a slightly higher power output for 150 mbar was observed. On the other hand, it is found that the stack performance increases appreciably when operated with forced air convection instead of natural convection. Finally, the continuous fuel flow operation mode does not improve the stack performance in comparison with the hydrogen dead-end mode, in spite of being preferable to operate the stack with hydrogen flow rates above 0.20 l/min. (author)

  7. Chronology and palaeoenvironmental implications of the ice-wedge pseudomorphs and composite-wedge casts on the Magdalen Islands (eastern Canada)

    DEFF Research Database (Denmark)

    Remillard, A.M.; Hetu, B.; Bernatchez, P.

    2015-01-01

    The Magdalen Islands are a valuable terrestrial record, evidencing the complex glacial and periglacial history of the Gulf of St. Lawrence. Thirteen structures interpreted as ice-wedge pseudomorphs or composite-wedge casts were observed at four sites on the southern Magdalen Islands and testify...

  8. Observation of wedge waves and their mode transformation by laser ultrasonic technique

    Institute of Scientific and Technical Information of China (English)

    Jing Jia; Zhonghua Shen; Lijuan Wang; Ling Yuan

    2011-01-01

    Wedge waves (WWs) in wedges, including their dispersion characteristics and mode transformation, are investigated using the laser ultrasound technique. Pulsed laser excitation and optical deflection beam method for detection are used to record WWs. Numerous WWs are detected by scanning the excitation laser along the wedge tip. Dispersions of WWs are obtained by using the two-dimensional (2D) Fourier transformation method, and different WW orders are revealed on the wedges. Mode transformation is determined by fixing the distance between the excitation and detection position, as well as by scanning the samples along the normal direction of the wedge tip.%@@ Wedge waves (WWs) in wedges, including their dispersion characteristics and mode transformation, are investigated using the laser ultrasound technique. Pulsed laser excitation and optical deflection beam method for detection are used to record WWs. Numerous WWs are detected by scanning the excitation laser along the wedge tip. Dispersions of WWs are obtained by using the two-dimensional (2D) Fourier transformation method, and different WW orders are revealed on the wedges. Mode transformation is determined by fixing the distance between the excitation and detection position, as well as by scanning the samples along the normal direction of the wedge tip.

  9. Five-Phase Five-Level Open-Winding/Star-Winding Inverter Drive for Low-Voltage/High-Current Applications

    DEFF Research Database (Denmark)

    Padmanaban, Sanjeevi Kumar; Blaabjerg, Frede; Wheeler, Patrick

    2016-01-01

    This paper work proposed a five-phase five-level open-/star-winding multilevel AC converter suitable for low-voltage/high-current applications. Modular converter consists of classical two-level five-phase voltage source inverter (VSI) with slight reconfiguration to serve as a multilevel converter...

  10. Crystallization of soft matter under confinement at interfaces and in wedges

    Science.gov (United States)

    Archer, Andrew J.; Malijevský, Alexandr

    2016-06-01

    opening angle of the wedge is commensurate with the crystal lattice.

  11. Mask-Free Patterning of High-Conductivity Metal Nanowires in Open Air by Spatially Modulated Femtosecond Laser Pulses.

    Science.gov (United States)

    Wang, Andong; Jiang, Lan; Li, Xiaowei; Liu, Yang; Dong, Xianzi; Qu, Liangti; Duan, Xuanming; Lu, Yongfeng

    2015-10-28

    A novel high-resolution nanowire fabrication method is developed by thin-film patterning using a spatially modulated femtosecond laser pulse. Deep subwavelength (≈1/13 of the laser wavelength) and high conductivity (≈1/4 of the bulk gold) nanowires are fabricated in the open air without using masks, which offers a single-step arbitrary direct patterning approach for electronics, plasmonics, and optoelectronics nanodevices.

  12. CFD analysis with fluid-structure interaction of opening high-pressure safety valves

    NARCIS (Netherlands)

    Beune, A.; Kuerten, J.G.M.; Heumen, van M.P.C.

    2012-01-01

    A multi-mesh numerical valve model has been developed to analyze the opening characteristic of highpressure safety valves. Newton’s law and the CFD result for the flow force are used to model the movement of the valve. In incompressible transient flow simulations a large force rise and collapse is c

  13. The Relationship of Children Connectivity and Physical Activities with Satisfaction of Open Spaces in High Rise Apartments in Tehran

    Directory of Open Access Journals (Sweden)

    Ali Sharghi

    2014-07-01

    Full Text Available Increase of urbanization has pressure on the urban children's lives and physical activities. While in designing of residential apartments’ open spaces, there is little attention to the children. The children, who live in the high-rise apartments found to have less physical activities. However, supposedly, children need to engage in the physical activity in the outdoor areas as WHO recommend that children take part in at least one hour of moderate physical activity in every day. This paper firstly, reviews different researches in this area. Then, it attempts to find children’s satisfaction regarding connectivity to open spaces as a dependent variable and their preferred activities, perceived safety, and familiarity about connectivity to open spaces as independent variables. The method of study is a semi-interview survey with 80 children between 6 and 12 years old (primary school ages in two cases in Tehran. The result of this research shows that children satisfaction from open space has an effect on their outdoor activities. Therefore, the designers should be considering children physical activities needs in open spaces.

  14. Observing lysozyme's closing and opening motions by high-resolution single-molecule enzymology.

    Science.gov (United States)

    Akhterov, Maxim V; Choi, Yongki; Olsen, Tivoli J; Sims, Patrick C; Iftikhar, Mariam; Gul, O Tolga; Corso, Brad L; Weiss, Gregory A; Collins, Philip G

    2015-06-19

    Single-molecule techniques can monitor the kinetics of transitions between enzyme open and closed conformations, but such methods usually lack the resolution to observe the underlying transition pathway or intermediate conformational dynamics. We have used a 1 MHz bandwidth carbon nanotube transistor to electronically monitor single molecules of the enzyme T4 lysozyme as it processes substrate. An experimental resolution of 2 μs allowed the direct recording of lysozyme's opening and closing transitions. Unexpectedly, both motions required 37 μs, on average. The distribution of transition durations was also independent of the enzyme's state: either catalytic or nonproductive. The observation of smooth, continuous transitions suggests a concerted mechanism for glycoside hydrolysis with lysozyme's two domains closing upon the polysaccharide substrate in its active site. We distinguish these smooth motions from a nonconcerted mechanism, observed in approximately 10% of lysozyme openings and closings, in which the enzyme pauses for an additional 40-140 μs in an intermediate, partially closed conformation. During intermediate forming events, the number of rate-limiting steps observed increases to four, consistent with four steps required in the stepwise, arrow-pushing mechanism. The formation of such intermediate conformations was again independent of the enzyme's state. Taken together, the results suggest lysozyme operates as a Brownian motor. In this model, the enzyme traces a single pathway for closing and the reverse pathway for enzyme opening, regardless of its instantaneous catalytic productivity. The observed symmetry in enzyme opening and closing thus suggests that substrate translocation occurs while the enzyme is closed.

  15. Deviation of tracheal pressure from airway opening pressure during high-frequency oscillatory ventilation in a porcine lung model.

    Science.gov (United States)

    Johannes, Amélie; Zollhoefer, Bernd; Eujen, Ulrike; Kredel, Markus; Rauch, Stefan; Roewer, Norbert; Muellenbach, Ralf M

    2013-04-01

    Oxygenation during high-frequency oscillatory ventilation is secured by a high level of mean airway pressure. Our objective was to identify a pressure difference between the airway opening of the respiratory circuit and the trachea during application of different oscillatory frequencies. Six female Pietrain pigs (57.1 ± 3.6 kg) were first ventilated in a conventional mechanical ventilation mode. Subsequently, the animals were switched to high-frequency oscillatory ventilation by setting mean airway opening pressure 5 cmH(2)O above the one measured during controlled mechanical ventilation. Measurements at the airway opening and at tracheal levels were performed in healthy lungs and after induction of acute lung injury by surfactant depletion. During high-frequency oscillatory ventilation, the airway opening pressure was set at a constant level. The pressure amplitude was fixed at 90 cmH(2)O. Starting from an oscillatory frequency of 3 Hz, the frequency was increased in steps of 3 Hz to 15 Hz and then decreased accordingly. At each frequency, measurements were performed in the trachea through a side-lumen of the endotracheal tube and the airway opening pressure was recorded. The pressure difference was calculated. At every oscillatory frequency, a pressure loss towards the trachea could be shown. This pressure difference increased with higher oscillatory frequencies (3 Hz 2.2 ± 2.1 cmH(2)O vs. 15 Hz 7.5 ± 1.8 cmH(2)O). The results for healthy and injured lungs were similar. Tracheal pressures decreased with higher oscillatory frequencies. This may lead to pulmonary derecruitment. This has to be taken into consideration when increasing oscillatory frequencies and differentiated pressure settings are mandatory.

  16. Exploration of Salt Wedge Dynamics in the Columbia River Estuary Using Optical Measurements of Internal Ship Wakes.

    Science.gov (United States)

    Holman, R. A.; Greydanus, S. J.

    2014-12-01

    In May of 2013 and beyond, Argus optical measurements of the mouth of the Columbia River estuary and plume were collected as part of the RIVET II multi-investigator field experiment. One surprise was the strength of eddy and internal wave signatures observed in movies computed from one-minute averages of high-frequency snapshots (such that gravity waves were averaged out but slicks and variable surface roughness remained). In particular, passing ships left wakes that propagated away at speeds on the order of 0.5 m/s, much slower than gravity waves and presumably surface manifestations of internal waves associated with the time-varying salt-wedge. Thus, these internal ship wakes appear to act as probes of internal stratification dynamics. This paper will explore the time variations of these internal wakes and relate them to corresponding variations in the estuary salt wedge.

  17. The age of formation of the mirabilite and sand wedges in the Hexi Corridor and their paleoclimatic interpretation

    Institute of Scientific and Technical Information of China (English)

    WANG Nai'ang; ZHANG Jianming; CHENG Hongyi; GUO Jianying; ZHAO Qiang

    2003-01-01

    Sand wedges in the Hexi Corridor mainly formed in an alluvial gravel stratum of the late Pleistocene and the radiocarbon ages of the eolian sand infilling wedge prove that they were a product of the last ice age. During their period of formation, the mean annual air temperature in the Hexi Corridor was about -5.3℃, i. e. about 13℃ lower than that of the present. This estimated value iscoincident with the decrease in air temperature predicated from mirabilite (Na2SO4·10H2O) sedimentary layer in study area, and also agrees with research on theestimated amplitude of air temperature lowering in middle and high latitudes ofthe Northern Hemisphere during the last glacial period. The annual precipitation in the Western Hexi Corridor at that time was probably about 100-200 mm, i.e.about 100 mm more than at present.

  18. Simulation of arrested salt wedges with a multi-layer Shallow Water Lattice Boltzmann model

    Science.gov (United States)

    Prestininzi, P.; Montessori, A.; La Rocca, M.; Sciortino, G.

    2016-10-01

    The ability to accurately and efficiently model the intrusion of salt wedges into river beds is crucial to assay its interaction with human activities and the natural environment. We present a 2D multi-layer Shallow Water Lattice Boltzmann (SWLB) model able to predict the salt wedge intrusion in river estuaries. The formulation usually employed for the simulation of gravity currents is here equipped with proper boundary conditions to handle both the downstream seaside outlet and the upstream river inlet. Firstly, the model is validated against highly accurate semi-analytical solutions of the steady state 1D two-layer Shallow Water model. Secondly, the model is applied to a more complex, fully 3D geometry, to assess its capability to handle realistic cases. The simple formulation proposed for the shear interlayer stress is proven to be consistent with the general 3D viscous solution. In addition to the accuracy, the model inherits the efficiency of the Lattice Boltzmann approach to fluid dynamics problems.

  19. Compact multi-projection 3D display using a wedge prism

    Science.gov (United States)

    Park, Soon-gi; Lee, Chang-Kun; Lee, Byoungho

    2015-03-01

    We propose a compact multi-projection system based on integral floating method with waveguide projection. Waveguide projection can reduce the projection distance by multiple folding of optical path inside the waveguide. The proposed system is composed of a wedge prism, which is used as a waveguide, multiple projection-units, and an anisotropic screen made of floating lens combined with a vertical diffuser. As the projected image propagates through the wedge prism, it is reflected at the surfaces of prism by total internal reflections, and the final view image is created by the floating lens at the viewpoints. The position of view point is decided by the lens equation, and the interval of view point is calculated by the magnification of collimating lens and interval of projection-units. We believe that the proposed method can be useful for implementing a large-scale autostereoscopic 3D system with high quality of 3D images using projection optics. In addition, the reduced volume of the system will alleviate the restriction of installment condition, and will widen the applications of a multi-projection 3D display.

  20. Enhanced performance of fast-response 3-hole wedge probes for transonic flows in axial turbomachinery

    Energy Technology Data Exchange (ETDEWEB)

    Delhaye, D.; Paniagua, G. [von Karman Institute for Fluid Dynamics, Turbomachinery and Propulsion Department, Rhode-Saint-Genese (Belgium); Fernandez Oro, J.M. [Universidad de Oviedo, Area de Mecanica de Fluidos, Gijon (Spain); Denos, R. [European Commission, Directorate General for Research, Brussels (Belgium)

    2011-01-15

    The paper presents the development and application of a three-sensor wedge probe to measure unsteady aerodynamics in a transonic turbine. CFD has been used to perform a detailed uncertainty analysis related to probe-induced perturbations, in particular the separation zones appearing on the wedge apex. The effects of the Reynolds and Mach numbers are studied using both experimental data together with CFD simulations. The angular range of the probe and linearity of the calibration maps are enhanced with a novel zonal calibration technique, used for the first time in compressible flows. The data reduction methodology is explained and demonstrated with measurements performed in a single-stage high-pressure turbine mounted in the compression tube facility of the von Karman Institute. The turbine was operated at subsonic and transonic pressure ratios (2.4 and 5.1) for a Reynolds number of 10{sup 6}, representative of modern engine conditions. Complete maps of the unsteady flow angle and rotor outlet Mach number are documented. These data allow the study of secondary flows and rotor trailing edge shocks. (orig.)

  1. Enhanced performance of fast-response 3-hole wedge probes for transonic flows in axial turbomachinery

    Science.gov (United States)

    Delhaye, D.; Paniagua, G.; Fernández Oro, J. M.; Dénos, R.

    2011-01-01

    The paper presents the development and application of a three-sensor wedge probe to measure unsteady aerodynamics in a transonic turbine. CFD has been used to perform a detailed uncertainty analysis related to probe-induced perturbations, in particular the separation zones appearing on the wedge apex. The effects of the Reynolds and Mach numbers are studied using both experimental data together with CFD simulations. The angular range of the probe and linearity of the calibration maps are enhanced with a novel zonal calibration technique, used for the first time in compressible flows. The data reduction methodology is explained and demonstrated with measurements performed in a single-stage high-pressure turbine mounted in the compression tube facility of the von Karman Institute. The turbine was operated at subsonic and transonic pressure ratios (2.4 and 5.1) for a Reynolds number of 106, representative of modern engine conditions. Complete maps of the unsteady flow angle and rotor outlet Mach number are documented. These data allow the study of secondary flows and rotor trailing edge shocks.

  2. Modes of continental extension in a crustal wedge

    KAUST Repository

    Wu, Guangliang

    2015-07-01

    © 2015 Elsevier B.V. We ran numerical experiments of the extension of a crustal wedge as an approximation to extension in an orogenic belt or a continental margin. We study the effects of the strength of the lower crust and of a weak mid-crustal shear zone on the resulting extension styles. A weak mid-crustal shear zone effectively decouples upper crustal extension from lower crustal flow. Without the mid-crustal shear zone, the degree of coupling between the upper and the lower crust increases and extension of the whole crust tends to focus on the thickest part of the wedge. We identify three distinct modes of extension determined by the strength of the lower crust, which are characterized by 1) localized, asymmetric crustal exhumation in a single massif when the lower crust is weak, 2) the formation of rolling-hinge normal faults and the exhumation of lower crust in multiple core complexes with an intermediate strength lower crust, and 3) distributed domino faulting over the weak mid-crustal shear zone when the lower crust is strong. A frictionally stronger mid-crustal shear zone does not change the overall model behaviors but extension occurred over multiple rolling-hinges. The 3 modes of extension share characteristics similar to geological models proposed to explain the formation of metamorphic core complexes: 1) the crustal flow model for the weak lower crust, 2) the rolling-hinge and crustal flow models when the lower crust is intermediate and 3) the flexural uplift model when the lower crust is strong. Finally we show that the intensity of decoupling between the far field extension and lower crustal flow driven by the regional pressure gradient in the wedge control the overall style of extension in the models.

  3. Modes of continental extension in a crustal wedge

    Science.gov (United States)

    Wu, Guangliang; Lavier, Luc L.; Choi, Eunseo

    2015-07-01

    We ran numerical experiments of the extension of a crustal wedge as an approximation to extension in an orogenic belt or a continental margin. We study the effects of the strength of the lower crust and of a weak mid-crustal shear zone on the resulting extension styles. A weak mid-crustal shear zone effectively decouples upper crustal extension from lower crustal flow. Without the mid-crustal shear zone, the degree of coupling between the upper and the lower crust increases and extension of the whole crust tends to focus on the thickest part of the wedge. We identify three distinct modes of extension determined by the strength of the lower crust, which are characterized by 1) localized, asymmetric crustal exhumation in a single massif when the lower crust is weak, 2) the formation of rolling-hinge normal faults and the exhumation of lower crust in multiple core complexes with an intermediate strength lower crust, and 3) distributed domino faulting over the weak mid-crustal shear zone when the lower crust is strong. A frictionally stronger mid-crustal shear zone does not change the overall model behaviors but extension occurred over multiple rolling-hinges. The 3 modes of extension share characteristics similar to geological models proposed to explain the formation of metamorphic core complexes: 1) the crustal flow model for the weak lower crust, 2) the rolling-hinge and crustal flow models when the lower crust is intermediate and 3) the flexural uplift model when the lower crust is strong. Finally we show that the intensity of decoupling between the far field extension and lower crustal flow driven by the regional pressure gradient in the wedge control the overall style of extension in the models.

  4. THE SAND WEDGE AND MIRABILITE OF THE LAST ICE AGE AND THEIR PALEOCLIMATIC SIGNIFICANCE IN HEXI CORRIDOR

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The sand wedges in Hexi Corridor occur in the alluvial gravel stratum of bajada and high terraces. The 14C ages of eolian sand in sand wedges prove that they formed during the Last Ice Age, with the mean annual air temperature about 5.6℃. The common 14C and AMS 14C dating ages of terrestrial branch relicts in Huahai clay-mirabilite interlayer are ( 11 600 ±280) a B. P. and (1118 ±54) a B.P. respectively, proving that the mirabilite formed at the cold episode of the Last Glacial Maximum(LGM) and Younger Dryers(YD) in Huahai Lake. It is pointed out that the mean annual air temperature in Hexi Corridor during LGM was about - 3℃ - - 7℃ ,11℃ - 15℃ lower than that of present, and that during YD was about 0℃ - 2℃,6℃ - 8℃ lower than at present. This decreasing temperature values are generally coincident with those inferred by pollen, sand wedge and ice core in the northern China, and also with the research on temperature-falling amplitude of middle and high latitude on the Northern Hemisphere recently.

  5. Heat conduction problem of an evaporating liquid wedge

    Directory of Open Access Journals (Sweden)

    Tomas Barta

    2015-02-01

    Full Text Available We consider the stationary heat transfer near the contact line of an evaporating liquid wedge surrounded by the atmosphere of its pure vapor. In a simplified setting, the problem reduces to the Laplace equation in a half circle, subject to a non-homogeneous and singular boundary condition. By classical tools (conformal mapping, Green's function, we reformulate the problem as an integral equation for the unknown Neumann boundary condition in the setting of appropriate fractional Sobolev and weighted space. The unique solvability is then obtained by means of the Fredholm theorem.

  6. Magmatism significantly alters the thermal structure of the wedge

    Science.gov (United States)

    Rees Jones, D. W.; Katz, R. F.; Rudge, J. F.; Tian, M.

    2016-12-01

    The temperature structure of the mantle wedge is typically modelled as a balance between thermal diffusion and advection by the solid mantle [e.g., 1]. The thermal state of the wedge promotes melting and melt transport in the natural system, but the thermal consequences of these processes have been neglected from previous models. We show that advective transport of sensible and latent heat by liquid magma can locally alter the temperature structure from canonical models by up to 200K. Liquids are liberated from the subducting slab by de-volatilization reactions. They trigger melting and become silicic en route to the surface, where they cause arc volcanism. These liquids transport heat advectively, and consume or supply latent heat as they melt or freeze. To analyse these effects, we parameterise melting in the presence of volatile species. We combine this with a one-dimensional "melting-column model," previously used to understand mid-ocean ridge volcanism. Our calculations highlight the thermal and chemical response to melt transport across the mantle wedge. Finally, we solve two-dimensional geodynamic models with a prescribed slab flux [2]. These models allow us to identify the most thermally significant fluxes of melt in the system. Perturbations of 200K are found at the base of the overriding lithosphere. This thermal signature of melt migration should be considered when interpreting heat flow, petrologic and seismic data [e.g., 3]. Such a thermal perturbation is likely to affect the chemistry of arc volcanoes, the solid mantle flow and, perhaps, the location of the volcanos themselves [4]. [1] van Keken, P. E., Currie, C., King, S. D., Behn, M. D., Cagnioncle, A., He, J., et al. (2008). A community benchmark for subduction zone modeling. PEPI, doi:10.1016/j.pepi.2008.04.015 [2] Wilson, C. R., Spiegelman, M., van Keken, P. E., & Hacker, B. R. (2014). Fluid flow in subduction zones: The role of solid rheology and compaction pressure. EPSL, doi:10.1016/j

  7. Inverse analysis of the wedge-splitting test

    DEFF Research Database (Denmark)

    Skocek, Jan; Stang, Henrik

    2008-01-01

    The amount of information which it is possible to retrieve from the wedge-splitting test is investigated. Inverse analysis is undertaken based on the analytical hinge model for various multi-linear softening curves. This showed that the commonly used bi-linear softening curve can be replaced...... by an tip to quad-linear curve, which is reflected by increased accuracy of the test simulation. Furthermore it was demonstrated that the next refinement of the softening curve leads to convergence problems due to problems with local minima. Finally, the semi-analytically obtained results are verified using...

  8. Electric monopoles in generalised B\\wedge F theories

    CERN Document Server

    Temple-Raston, M

    1996-01-01

    A tensor product generalisation of B\\wedge F theories is proposed to give a Bogomol'nyi structure. Non-singular, stable, finite-energy particle-like solutions to the Bogomol'nyi equations are studied. Unlike Yang-Mills(-Higgs) theory, the Bogomol'nyi structure does not appear as a perfect square in the Lagrangian. Consequently, the Bogomol'nyi energy can be obtained in more than one way. The added flexibility permits electric monopole solutions to the field equations.

  9. Properties of the open cluster Tombaugh 1 from high resolution spectroscopy and uvbyCaH$\\beta$ photometry

    CERN Document Server

    Silva, João V Sales; Anthony-Twarog, Barbara J; Bidin, Christian Moni; Costa, Edgardo; Twarog, Bruce A

    2015-01-01

    Open clusters can be the key to deepen our knowledge on various issues involving the structure and evolution of the Galactic disk and details of stellar evolution because a cluster's properties are applicable to all its members. However the number of open clusters with detailed analysis from high resolution spectroscopy and/or precision photometry imposes severe limitation on studies of these objects. To expand the number of open clusters with well-defined chemical abundances and fundamental parameters, we investigate the poorly studied, anticenter open cluster Tombaugh 1. Using precision uvbyCaH$\\beta$ photometry and high resolution spectroscopy, we derive the cluster's properties and, for the first time, present detailed abundance analysis of 10 potential cluster stars. Using radial position from the cluster center and multiple color indices, we have isolated a sample of unevolved probable, single-star members of Tombaugh 1. The weighted photometric metallicity from $m_1$ and $hk$ is [Fe/H] = -0.10 $\\pm$ 0....

  10. Heavy quark pair production in high energy pA collisions: Open heavy flavors

    CERN Document Server

    Fujii, Hirotsugu

    2013-01-01

    We study open heavy flavor meson production in proton-nucleus (pA) collisions at RHIC and LHC energies within the Color Glass Condensate framework. We use the unintegrated gluon distribution at small Bjorken's x in the proton obtained by solving the Balitsky-Kovchegov equation with running coupling correction and constrained by global fitting of HERA data. We change the initial saturation scale of the gluon distribution for the heavy nucleus. The gluon distribution with McLerran-Venugopalan model initial condition is also used for comparison. We present transverse momentum spectra of single D and B productions in pA collisions, and the so-called nuclear modification factor. The azimuthal angle correlation of open heavy flavor meson pair is also computed to study the modification due to the gluon saturation in the heavy nucleus at the LHC.

  11. The effect of shoe design and lateral wedging on knee loading

    DEFF Research Database (Denmark)

    Mølgaard, Carsten; Kersting, Uwe G.

    -dimensional gait analysis. Barefoot walking, walking in a running shoe, an Oxford-type leather shoe, and a rocker shoe were analyzed. The shoes were tested both with and without a 10-degree full length laterally wedged insole. Results: Similar, significant reductions in the peak knee adduction moment with lateral...... wedges were observed in all three types of shoes. However, differences between shoe design were of similar magnitude as the effect of laterally wedged insoles. Only marginal changes in muscle activity for lateral hamstrings during barefoot toe-out walking and gastrocnemius when using the Oxford wedged...

  12. OnEarth: An Open Source Solution for Efficiently Serving High-Resolution Mapped Image Products

    Science.gov (United States)

    Thompson, C. K.; Plesea, L.; Hall, J. R.; Roberts, J. T.; Cechini, M. F.; Schmaltz, J. E.; Alarcon, C.; Huang, T.; McGann, J. M.; Chang, G.; Boller, R. A.; Ilavajhala, S.; Murphy, K. J.; Bingham, A. W.

    2013-12-01

    This presentation introduces OnEarth, a server side software package originally developed at the Jet Propulsion Laboratory (JPL), that facilitates network-based, minimum-latency geolocated image access independent of image size or spatial resolution. The key component in this package is the Meta Raster Format (MRF), a specialized raster file extension to the Geospatial Data Abstraction Library (GDAL) consisting of an internal indexed pyramid of image tiles. Imagery to be served is converted to the MRF format and made accessible online via an expandable set of server modules handling requests in several common protocols, including the Open Geospatial Consortium (OGC) compliant Web Map Tile Service (WMTS) as well as Tiled WMS and Keyhole Markup Language (KML). OnEarth has recently transitioned to open source status and is maintained and actively developed as part of GIBS (Global Imagery Browse Services), a collaborative project between JPL and Goddard Space Flight Center (GSFC). The primary function of GIBS is to enhance and streamline the data discovery process and to support near real-time (NRT) applications via the expeditious ingestion and serving of full-resolution imagery representing science products from across the NASA Earth Science spectrum. Open source software solutions are leveraged where possible in order to utilize existing available technologies, reduce development time, and enlist wider community participation. We will discuss some of the factors and decision points in transitioning OnEarth to a suitable open source paradigm, including repository and licensing agreement decision points, institutional hurdles, and perceived benefits. We will also provide examples illustrating how OnEarth is integrated within GIBS and other applications.

  13. Nonfullerene Tandem Organic Solar Cells with High Open-Circuit Voltage of 1.97 V.

    Science.gov (United States)

    Liu, Wenqing; Li, Shuixing; Huang, Jiang; Yang, Shida; Chen, Jiehuan; Zuo, Lijian; Shi, Minmin; Zhan, Xiaowei; Li, Chang-Zhi; Chen, Hongzheng

    2016-11-01

    Small-molecule nonfullerene-based tandem organic solar cells (OSCs) are fabricated for the first time by utilizing P3HT:SF(DPPB)4 and PTB7-Th:IEIC bulk heterojunctions as the front and back subcells, respectively. A power conversion efficiency of 8.48% is achieved with an ultrahigh open-circuit voltage of 1.97 V, which is the highest voltage value reported to date among efficient tandem OSCs.

  14. Natural orifice transluminal endoscopic wedge hepatic resection with a water-jet hybrid knife in a non-survival porcine model

    Institute of Scientific and Technical Information of China (English)

    Hong Shi; Sheng-Jun Jiang; Bin Li; Deng-Ke Fu; Pei Xin; Yong-Guang Wang

    2011-01-01

    AIM:To explore the feasibility of a water-jet hybrid knife to facilitate wedge hepatic resection using a natural orifice transluminal endoscopic surgery (NOTES) approach in a non-survival porcine model.METHODS:The Erbe Jet2 water-jet system allows a needleless,tissue-selective hydro-dissection with a preselected pressure.Using this system,wedge hepatic resection was performed through three natural routes (trans-anal,trans-vaginal and trans-umbilical) in three female pigs weighing 35 kg under general anesthesia.Entry into the peritoneal cavity was via a 15-mm incision using a hook knife.The targeted liver segment was marked by an APC probe,followed by wedge hepatic resection performed using a water-jet hybrid knife with the aid of a 4-mm transparent distance soft cap mounted onto the tip of the endoscope for holding up the desired plane.The exposed vascular and ductal structures were clipped with Endoclips.Hemostasis was applied to the bleeding cut edges of the liver parenchyma by electrocautery.After the procedure,the incision site was left open,and the animal was euthanized followed by necropsy.RESULTS:Using the Erbe Jet2 water-jet system,transanal and trans-vaginal wedge hepatic resection was successfully performed in two pigs without laparoscopic assistance.Trans-umbilical attempt failed due to an unstable operating platform.The incision for peritoneal entry took 1 min,and about 2 h was spent on excision of the liver tissue.The intra-operative blood loss ranged from 100 to 250 mL.Microscopically,the hydro-dissections were relatively precise and gentle,preserving most vessels.CONCLUSION:The Erbe Jet2 water-jet system can safely accomplish non-anatomic wedge hepatic resection in NOTES,which deserves further studies to shorten the dissection time.

  15. Ultra-high open-circuit voltage of perovskite solar cells induced by nucleation thermodynamics on rough substrates

    Science.gov (United States)

    Li, Yan; Ding, Bin; Chu, Qian-Qian; Yang, Guan-Jun; Wang, Mingkui; Li, Chang-Xin; Li, Chang-Jiu

    2017-01-01

    To obtain high performance CH3NH3PbI3 perovskite solar cells, it is highly important to realise a high open-circuit voltage. Calculation results based on a modified diode model have indicated that a low bare ratio ϕ of the perovskite film is the most important factor determining the open-circuit voltage, where ϕ is defined as the ratio of the projection of the uncovered area of the perovskite film to the apparent area of the total substrate surface. To realise a low ϕ, we investigate the nucleation behaviour of crystals on rough substrates. The analysis results predict that, when CH3NH3PbI3 is deposited on conventional transparent conductive oxide substrates such as fluorine-doped tin oxide, preferential heterogeneous nucleation will occur on the concave regions of the substrate; then, depending on the subsequent growth step, full coverage of the perovskite film at both the macroscopic and microscopic scales is realised. As a result, an ultra-high open-circuit voltage, i.e., 1.20 V, can be achieved in devices using the full coverage CH3NH3PbI3 film. The thermodynamics theory of precipitation nucleation should shed light on solution engineering of thin films. PMID:28401890

  16. Ultra-high open-circuit voltage of perovskite solar cells induced by nucleation thermodynamics on rough substrates

    Science.gov (United States)

    Li, Yan; Ding, Bin; Chu, Qian-Qian; Yang, Guan-Jun; Wang, Mingkui; Li, Chang-Xin; Li, Chang-Jiu

    2017-04-01

    To obtain high performance CH3NH3PbI3 perovskite solar cells, it is highly important to realise a high open-circuit voltage. Calculation results based on a modified diode model have indicated that a low bare ratio ϕ of the perovskite film is the most important factor determining the open-circuit voltage, where ϕ is defined as the ratio of the projection of the uncovered area of the perovskite film to the apparent area of the total substrate surface. To realise a low ϕ, we investigate the nucleation behaviour of crystals on rough substrates. The analysis results predict that, when CH3NH3PbI3 is deposited on conventional transparent conductive oxide substrates such as fluorine-doped tin oxide, preferential heterogeneous nucleation will occur on the concave regions of the substrate; then, depending on the subsequent growth step, full coverage of the perovskite film at both the macroscopic and microscopic scales is realised. As a result, an ultra-high open-circuit voltage, i.e., 1.20 V, can be achieved in devices using the full coverage CH3NH3PbI3 film. The thermodynamics theory of precipitation nucleation should shed light on solution engineering of thin films.

  17. Radical covalent organic frameworks: a general strategy to immobilize open-accessible polyradicals for high-performance capacitive energy storage.

    Science.gov (United States)

    Xu, Fei; Xu, Hong; Chen, Xiong; Wu, Dingcai; Wu, Yang; Liu, Hao; Gu, Cheng; Fu, Ruowen; Jiang, Donglin

    2015-06-01

    Ordered π-columns and open nanochannels found in covalent organic frameworks (COFs) could render them able to store electric energy. However, the synthetic difficulty in achieving redox-active skeletons has thus far restricted their potential for energy storage. A general strategy is presented for converting a conventional COF into an outstanding platform for energy storage through post-synthetic functionalization with organic radicals. The radical frameworks with openly accessible polyradicals immobilized on the pore walls undergo rapid and reversible redox reactions, leading to capacitive energy storage with high capacitance, high-rate kinetics, and robust cycle stability. The results suggest that channel-wall functional engineering with redox-active species will be a facile and versatile strategy to explore COFs for energy storage.

  18. Growth and mixing dynamics of mantle wedge plumes

    Science.gov (United States)

    Gorczyk, Weronika; Gerya, Taras V.; Connolly, James A. D.; Yuen, David A.

    2007-07-01

    Recent work suggests that hydrated partially molten thermal-chemical plumes that originate from subducted slab as a consequence of Rayleigh-Taylor instability are responsible for the heterogeneous composition of the mantle wedge. We use a two-dimensional ultrahigh-resolution numerical simulation involving 10 × 109 active markers to anticipate the detailed evolution of the internal structure of natural plumes beneath volcanic arcs in intraoceanic subduction settings. The plumes consist of partially molten hydrated peridotite, dry solid mantle, and subducted oceanic crust, which may compose as much as 12% of the plume. As plumes grow and mature these materials mix chaotically, resulting in attenuation and duplication of the original layering on scales of 1-1000 m. Comparison of numerical results with geological observations from the Horoman ultramafic complex in Japan suggests that mixing and differentiation processes related to development of partially molten plumes above slabs may be responsible for the strongly layered lithologically mixed (marble cake) structure of asthenospheric mantle wedges.

  19. Relation of the auroral substorm to the substorm current wedge

    Science.gov (United States)

    McPherron, Robert L.; Chu, Xiangning

    2016-12-01

    The auroral substorm is an organized sequence of events seen in the aurora near midnight. It is a manifestation of the magnetospheric substorm which is a disturbance of the magnetosphere brought about by the solar wind transfer of magnetic flux from the dayside to the tail lobes and its return through the plasma sheet to the dayside. The most dramatic feature of the auroral substorm is the sudden brightening and poleward expansion of the aurora. Intimately associated with this expansion is a westward electrical current flowing across the bulge of expanding aurora. This current is fed by a downward field-aligned current (FAC) at its eastern edge and an upward current at its western edge. This current system is called the substorm current wedge (SCW). The SCW forms within a minute of auroral expansion. FAC are created by pressure gradients and field line bending from shears in plasma flow. Both of these are the result of pileup and diversion of plasma flows in the near-earth plasma sheet. The origins of these flows are reconnection sites further back in the tail. The auroral expansion can be explained by a combination of a change in field line mapping caused by the substorm current wedge and a tailward growth of the outer edge of the pileup region. We illustrate this scenario with a complex substorm and discuss some of the problems associated with this interpretation.

  20. Stress corrosion cracking and hydrogen embrittlement of thick section high strength low alloy steel.

    OpenAIRE

    Needham, William Donald

    1986-01-01

    An experimental study was conducted to evaluate the corrosion performance of weldments of a high strength low alloy(HSLA) steel in a simulated seawater environment. This steel, designated HSLA80, was developed by the United States Navy for use in ship structural applications. Stress corrosion CRACKING(SCC) and hydrogen embrittlement(HEM) were investigated by conducting 42 Wedge-Opening load(WOL) tests as a function of stress intensity and corrosion potential and 33 Slow Strain Rate(SSR) tests...

  1. Low-power, open-path mobile sensing platform for high-resolution measurements of greenhouse gases and air pollutants

    Science.gov (United States)

    Tao, Lei; Sun, Kang; Miller, David J.; Pan, Dan; Golston, Levi M.; Zondlo, Mark A.

    2015-04-01

    A low-power mobile sensing platform has been developed with multiple open-path gas sensors to measure the ambient concentrations of greenhouse gases and air pollutants with high temporal and spatial resolutions over extensive spatial domains. The sensing system consists of four trace gas sensors including two custom quantum cascade laser-based open-path sensors and two LICOR open-path sensors to measure CO2, CO, CH4, N2O, NH3, and H2O mixing ratios simultaneously at 10 Hz. In addition, sensors for meteorological and geolocation data are incorporated into the system. The system is powered by car batteries with a low total power consumption (~200 W) and is easily transportable due to its low total mass (35 kg). Multiple measures have been taken to ensure robust performance of the custom, open-path sensors located on top of the vehicle where the optics are exposed to the harsh on-road environment. The mobile sensing system has been integrated and installed on top of common passenger vehicles and participated in extensive field campaigns (>400 h on-road time with >18,000 km total distance) in both the USA and China. The simultaneous detection of multiple trace gas species makes the mobile sensing platform a unique and powerful tool to identify and quantify different emission sources through mobile mapping.

  2. Commissioning Varian enhanced dynamic wedge in the PINNACLE treatment planning system using Gafchromic EBT film.

    Science.gov (United States)

    Fontanarosa, Davide; Orlandini, Lucia Clara; Andriani, Italo; Bernardi, Luca

    2009-10-01

    In external photon beam therapies, the technique of dynamic wedge is a well established method for dose inhomogeneity compensation. The introduction of the enhanced dynamic wedge (EDW) on Varian LINACs considerably improved the pre-existing techniques. In the process of commissioning a Varian LINAC into a PINNACLE3 treatment planning system (TPS), the user is required to import quite a few measurements of EDW profiles and percentage depth doses (PDDs). Standard measurement devices like ionization chambers in a water phantom are not the most indicated ones for this situation where each measurement point is obtained by integrating during the entire exposure: Measurements would result to be a very laborious and time consuming operation, most of the times not practically possible. The goal of the present work is to introduce an alternative and hands-on procedure to perform the measurements using a combination of GafchromicTM EBT films, irradiated sideways in one single shot for both profiles and PDDs, and a single standard ionization chamber. The scanned profiles obtained at different depths have easily been imported in the TPS; for the PDD measurements, a correction was proven necessary to account for a "self-shielding" effect introduced by the presence of the films themselves, when irradiated sideways, resulting in an underestimation of the dose at deeper depths. A correction curve was derived comparing TPS open field validated measurements with the curves extracted from GafchromicTM EBT films. Finally, the curve was applied to all the wedged fields PDD measurements and could minimize the errors. The comparison for the 15 MV photon beam between the measured and the calculated 48 profiles and 12 PDDs (field sizes from 5 x 5 to 20 x 20 cm2, wedge angles ranging from 15 degrees to 60 degrees) was acceptable. The confidence limit (CL) was used as fit indicator, as suggested by the ESTRO Booklet No. 7: For the investigated PDDs the maximum value was 6.40 in the build up

  3. Growth of the deposit wedge in the mountain reservoir

    Science.gov (United States)

    Chen, Y.; Song, G.

    2011-12-01

    The sedimentary problem of mountain reservoirs in Taiwan is getting serious year by year.Due to eroded sediments enter downstream reservoirs,the loss of sediment transport capacity may cause deposition of sediment in reservoirs.This phenomenon make problems to small mountain reservoirs.To realize the interaction between deposit wedges and mountain reservoirs,we selected Wushe reservoir which is situated in central Taiwan for a case study. Wushe reservoir is long and narrow.In recent years,most sediment is introduced during rain events that now accompany climate change are very important in sediment supply.In this thesis,we collected data of underwater landform and sub-bottom bedding information by using high resolution Multibeam Survey System(MBS) and seismic-reflection system.Up to now,we already had the bathymetric data for more than ten years,moreover,in 2010,we used 3.5kHz sub-bottom seismic profiler to analysis the sedimentary bedding situation in this area.These methods provide us accurate reservoir topography,sediment accumulation and the major ways of sediment transportation.The study purposes are as follows: First,according to the available underwater data for last ten years,we recognize the geomorphological characters of sedimentation as well as complete the mappings.Comparing to bathymetric images each year,we evaluate the carried ways of sediment.The flow water which enters this area transports along the thalweg,which in eastern reservoir.The range of water level variation cause alteration of sedimentary morphology,it also affects the scope of alluvial fan.The alluvial fan is located in the middle of the reservoir,the edge of it had moved forward 500 meters for last ten years.The annual mean of forward velocity was 50 meters,the elevation of fan edge also accelerated 10 meters per year.In a word,the large volume of the sedimentary delta is in Wushe reservoir now. Second,trying to clarify the composition of sedimentation and explain the sub

  4. High rate, long cycle life battery electrode materials with an open framework structure

    Energy Technology Data Exchange (ETDEWEB)

    Wessells, Colin; Huggins, Robert; Cui, Yi; Pasta, Mauro

    2015-02-10

    A battery includes a cathode, an anode, and an aqueous electrolyte disposed between the cathode and the anode and including a cation A. At least one of the cathode and the anode includes an electrode material having an open framework crystal structure into which the cation A is reversibly inserted during operation of the battery. The battery has a reference specific capacity when cycled at a reference rate, and at least 75% of the reference specific capacity is retained when the battery is cycled at 10 times the reference rate.

  5. Carbon nanotube-polybithiophene photovoltaic devices with high open-circuit voltage

    Energy Technology Data Exchange (ETDEWEB)

    Patyk, Rodolfo L.; Huemmelgen, Ivo A. [Departamento de Fisica, Universidade Federal do Parana, Caixa Postal 19044, 81531-990 Curitiba PR (Brazil); Lomba, Bruno S.; Nogueira, Ana Flavia [Laboratorio de Nanotechnologia e Energia Solar, Instituto de Quimica, Unicamp, C.P. 6154, 13084-971 Campinas, Sao Paulo (Brazil); Furtado, Clascidia A.; Santos, Adelina Pinheiro [Laboratorio de Quimica de Nanoestruturas, CDTN/CNEN, Belo Horizonte, MG (Brazil); Mello, Regina M.Q.; Micaroni, Liliana [Departamento de Quimica, Universidade Federal do Parana, Caixa Postal 19081, 81531-990 Curitiba PR (Brazil)

    2007-01-15

    We report the preparation of photovoltaic devices using modified single wall carbon nanotubes, SWNTs. Devices are produced stacking on top of fluorine-doped tin-oxide, an electrochemically deposited polybithiophene layer, a layer of SWNT blended with poly(3-octylthiophene) and an evaporated top metal contact, Ca/Al or Al. Ca/Al-top-electrode devices achieve open-circuit voltages of 1.81 V and average power conversion efficiency of 1.48% at irradiance of 15.5 W m{sup -2}, spectrally distributed following AM1.5. (copyright 2007 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  6. DasPy – Open Source Multivariate Land Data Assimilation Framework with High Performance Computing

    Science.gov (United States)

    Han, Xujun; Li, Xin; Montzka, Carsten; Kollet, Stefan; Vereecken, Harry; Hendricks Franssen, Harrie-Jan

    2015-04-01

    Data assimilation has become a popular method to integrate observations from multiple sources with land surface models to improve predictions of the water and energy cycles of the soil-vegetation-atmosphere continuum. In recent years, several land data assimilation systems have been developed in different research agencies. Because of the software availability or adaptability, these systems are not easy to apply for the purpose of multivariate land data assimilation research. Multivariate data assimilation refers to the simultaneous assimilation of observation data for multiple model state variables into a simulation model. Our main motivation was to develop an open source multivariate land data assimilation framework (DasPy) which is implemented using the Python script language mixed with C++ and Fortran language. This system has been evaluated in several soil moisture, L-band brightness temperature and land surface temperature assimilation studies. The implementation allows also parameter estimation (soil properties and/or leaf area index) on the basis of the joint state and parameter estimation approach. LETKF (Local Ensemble Transform Kalman Filter) is implemented as the main data assimilation algorithm, and uncertainties in the data assimilation can be represented by perturbed atmospheric forcings, perturbed soil and vegetation properties and model initial conditions. The CLM4.5 (Community Land Model) was integrated as the model operator. The CMEM (Community Microwave Emission Modelling Platform), COSMIC (COsmic-ray Soil Moisture Interaction Code) and the two source formulation were integrated as observation operators for assimilation of L-band passive microwave, cosmic-ray soil moisture probe and land surface temperature measurements, respectively. DasPy is parallelized using the hybrid MPI (Message Passing Interface) and OpenMP (Open Multi-Processing) techniques. All the input and output data flow is organized efficiently using the commonly used NetCDF file

  7. High Resolution Topography of Polar Regions from Commercial Satellite Imagery, Petascale Computing and Open Source Software

    Science.gov (United States)

    Morin, Paul; Porter, Claire; Cloutier, Michael; Howat, Ian; Noh, Myoung-Jong; Willis, Michael; Kramer, WIlliam; Bauer, Greg; Bates, Brian; Williamson, Cathleen

    2017-04-01

    Surface topography is among the most fundamental data sets for geosciences, essential for disciplines ranging from glaciology to geodynamics. Two new projects are using sub-meter, commercial imagery licensed by the National Geospatial-Intelligence Agency and open source photogrammetry software to produce a time-tagged 2m posting elevation model of the Arctic and an 8m posting reference elevation model for the Antarctic. When complete, this publically available data will be at higher resolution than any elevation models that cover the entirety of the Western United States. These two polar projects are made possible due to three equally important factors: 1) open-source photogrammetry software, 2) petascale computing, and 3) sub-meter imagery licensed to the United States Government. Our talk will detail the technical challenges of using automated photogrammetry software; the rapid workflow evolution to allow DEM production; the task of deploying the workflow on one of the world's largest supercomputers; the trials of moving massive amounts of data, and the management strategies the team needed to solve in order to meet deadlines. Finally, we will discuss the implications of this type of collaboration for future multi-team use of leadership-class systems such as Blue Waters, and for further elevation mapping.

  8. Local Atmospheric Response to an Open-Ocean Polynya in a High-Resolution Climate Model

    Energy Technology Data Exchange (ETDEWEB)

    Weijer, Wilbert; Veneziani, Milena; Stossel, Achim; Hecht, Matthew; Jeffery, Nicole; Jonko, Alexandra; Hodos, Travis; Wang, Hailong

    2017-03-01

    In this paper we study the atmospheric response to an open-ocean polynya in the Southern Ocean by analyzing the results from an atmospheric and oceanic synoptic-scale resolving Community Earth System Model (CESM) simulation. While coarser-resolution versions of CESM generally do not produce open-ocean polynyas in the Southern Ocean, they do emerge and disappear on interannual timescales in the synoptic-scale simulation. This provides an ideal opportunity to study the polynya’s impact on the overlying and surrounding atmosphere. This has been pursued here by investigating the seasonal cycle of differences of surface and air-column variables between polynya and nonpolynya years. Our results indicate significant local impacts on turbulent heat fluxes, precipitation, cloud characteristics, and radiative fluxes. In particular, we find that clouds over polynyas are optically thicker and higher than clouds over sea ice during non-polynya years. Although the lower albedo of polynyas significantly increases the net shortwave absorption, the enhanced cloud brightness tempers this increase by almost 50%. Also, in this model, enhanced longwave radiation emitted from the warmer surface of polynyas is balanced by stronger downwelling fluxes from the thicker cloud deck. Impacts are found to be sensitive to the synoptic wind direction. Strongest regional impacts are found when northeasterly winds cross the polynya and interact with katabatic winds. Surface air pressure anomalies over the polynya are only found to be significant when cold, dry air masses strike over the polynya, i.e. in case of southerly winds.

  9. Duality in nonlinear B$\\wedge$F models equivalence between self-dual and topologically massive Born-Infeld B$\\wedge$F models

    CERN Document Server

    Menezes, R; Ribeiro, R F; Wotzasek, C

    2002-01-01

    We study the dual equivalence between the nonlinear generalization of the self-dual ($NSD_{B\\wedge F}$) and the topologically massive $B\\wedge F$ models with particular emphasis on the nonlinear electrodynamics proposed by Born and Infeld. This is done through a dynamical gauge embedding of the nonlinear self-dual model yielding to a gauge invariant and dynamically equivalent theory. We clearly show that nonpolinomial $NSD_{B\\wedge F}$ models can be mapped, through a properly defined duality transformation, into $TM_{B\\wedge F}$ actions. The general result obtained is then particularized for a number of examples, including the Born-Infeld-BF (BIBF) model that has experienced a revival in the recent literature.

  10. Symmetry-Breaking Charge Transfer in a Zinc Chlorodipyrrin Acceptor for High Open Circuit Voltage Organic Photovoltaics

    KAUST Repository

    Bartynski, Andrew N.

    2015-04-29

    © 2015 American Chemical Society. Low open-circuit voltages significantly limit the power conversion efficiency of organic photovoltaic devices. Typical strategies to enhance the open-circuit voltage involve tuning the HOMO and LUMO positions of the donor (D) and acceptor (A), respectively, to increase the interfacial energy gap or to tailor the donor or acceptor structure at the D/A interface. Here, we present an alternative approach to improve the open-circuit voltage through the use of a zinc chlorodipyrrin, ZCl [bis(dodecachloro-5-mesityldipyrrinato)zinc], as an acceptor, which undergoes symmetry-breaking charge transfer (CT) at the donor/acceptor interface. DBP/ZCl cells exhibit open-circuit voltages of 1.33 V compared to 0.88 V for analogous tetraphenyldibenzoperyflanthrene (DBP)/C60-based devices. Charge transfer state energies measured by Fourier-transform photocurrent spectroscopy and electroluminescence show that C60 forms a CT state of 1.45 ± 0.05 eV in a DBP/C60-based organic photovoltaic device, while ZCl as acceptor gives a CT state energy of 1.70 ± 0.05 eV in the corresponding device structure. In the ZCl device this results in an energetic loss between ECT and qVOC of 0.37 eV, substantially less than the 0.6 eV typically observed for organic systems and equal to the recombination losses seen in high-efficiency Si and GaAs devices. The substantial increase in open-circuit voltage and reduction in recombination losses for devices utilizing ZCl demonstrate the great promise of symmetry-breaking charge transfer in organic photovoltaic devices.

  11. Open source large-scale high-resolution environmental modelling with GEMS

    Science.gov (United States)

    Baarsma, Rein; Alberti, Koko; Marra, Wouter; Karssenberg, Derek

    2016-04-01

    Many environmental, topographic and climate data sets are freely available at a global scale, creating the opportunities to run environmental models for every location on Earth. Collection of the data necessary to do this and the consequent conversion into a useful format is very demanding however, not to mention the computational demand of a model itself. We developed GEMS (Global Environmental Modelling System), an online application to run environmental models on various scales directly in your browser and share the results with other researchers. GEMS is open-source and uses open-source platforms including Flask, Leaflet, GDAL, MapServer and the PCRaster-Python modelling framework to process spatio-temporal models in real time. With GEMS, users can write, run, and visualize the results of dynamic PCRaster-Python models in a browser. GEMS uses freely available global data to feed the models, and automatically converts the data to the relevant model extent and data format. Currently available data includes the SRTM elevation model, a selection of monthly vegetation data from MODIS, land use classifications from GlobCover, historical climate data from WorldClim, HWSD soil information from WorldGrids, population density from SEDAC and near real-time weather forecasts, most with a ±100m resolution. Furthermore, users can add other or their own datasets using a web coverage service or a custom data provider script. With easy access to a wide range of base datasets and without the data preparation that is usually necessary to run environmental models, building and running a model becomes a matter hours. Furthermore, it is easy to share the resulting maps, timeseries data or model scenarios with other researchers through a web mapping service (WMS). GEMS can be used to provide open access to model results. Additionally, environmental models in GEMS can be employed by users with no extensive experience with writing code, which is for example valuable for using models

  12. The role of aerothermochemistry in double cone and double wedge flows

    Science.gov (United States)

    Swantek, Andrew

    In this work, hypervelocity flows over double cone and double wedge geometries are studied. The flow configurations established over the double cone/double wedge models are extremely sensitive to thermochemistry, and thus serve as ideal benchmarks for validating chemical models. The goals of this research are: i) to investigate the coupling between the fluid mechanics and thermochemistry in these flow fields by varying freestream flow composition and enthalpy, ii) to implement a diagnostic suite for time-resolved surface and freestream measurements, iii) to investigate the nature of flow field unsteadiness across various test conditions, and lastly iv) to extend the experimental database for shock wave boundary/layer interactions. An expansion tube is used to generate flows with enthalpies ranging from 2.2-8.0 MJ/kg (2-4 km/s) and Mach numbers from 4-7. The expansion tube is a novel impulse facility for accelerating a test gas to these velocities, while maintaining a minimally dissociated freestream. Additionally, the facility allows variation of the freestream composition (between nitrogen and air), while maintaining freestream test parameters (Mach number, density, enthalpy) to within 0.5%. Two models are used: a 25-55 degree double cone model and a 30-55 degree double wedge. There are four diagnostic components to this research which aim to enable a better understanding of these canonical flow fields. Single frame, high resolution schlieren photography is used to visualize various flow features including: the separation zone formed in the corner, the triple point interaction, and a supersonic shear layer. From these images, a separation zone length scaling parameter is determined. This parameter, derived for wedge geometries, is successfully applied to conical geometries by using a judicious choice of flow properties for scaling. In the wedge image series, nitrogen test conditions exhibit a distinct increase in bow shock standoff distance. Additionally, aft

  13. High tibial osteotomy in varus knees: indications and limits

    Science.gov (United States)

    LOIA, MARCO CORGIAT; VANNI, STEFANIA; ROSSO, FEDERICA; BONASIA, DAVIDE EDOARDO; BRUZZONE, MATTEO; DETTONI, FEDERICO; ROSSI, ROBERTO

    2016-01-01

    Opening wedge high tibial osteotomy (OWHTO) is a surgical procedure that aims to correct the weight-bearing axis of the knee, moving the loads laterally from the medial compartment. Conventional indications for OWHTO are medial compartment osteoarthritis and varus malalignment of the knee; recently OWHTO has been used successfully in the treatment of double and triple varus. OWHTO, in contrast to closing wedge high tibial osteotomy, does not require fibular osteotomy or peroneal nerve dissection, or lead to disruption of the proximal tibiofibular joint and bone stock loss. For these reasons, interest in this procedure has grown in recent years. The aim of this study is to review the literature on OWHTO, considering indications and prognostic factors (body mass index, grade of osteoarthritis, instability, range of movement and age), outcomes at mid-term follow-up, and limits of the procedure (slope modifications, patellar height changes and difficulties in conversion to a total knee arthroplasty). PMID:27602350

  14. An Azulene-Containing Low Bandgap Small Molecule for Organic Photovoltaics with High Open-Circuit Voltage.

    Science.gov (United States)

    Chen, Yao; Zhu, Youqin; Yang, Daobin; Zhao, Suling; Zhang, Lei; Yang, Lin; Wu, Jianglin; Huang, Yan; Xu, Zheng; Lu, Zhiyun

    2016-10-01

    A simple azulene-containing squaraine dye (AzUSQ) showing bandgap of 1.38 eV and hole mobility up to 1.25×10(-4)  cm(2)  V(-1)  s(-1) was synthesized. With its low bandgap, an organic photovoltaic (OPV) device based on it has been made that exhibits an impressive open-circuit voltages (Voc ) of 0.80 V. Hence, azulene might be a promising structural unit to construct OPV materials with simultaneous low bandgap, high hole mobility and high Voc .

  15. High Opening Injection Pressure Is Associated With Needle-Nerve and Needle-Fascia Contact During Femoral Nerve Block.

    Science.gov (United States)

    Gadsden, Jeff; Latmore, Malikah; Levine, D Matt; Robinson, Allegra

    2016-01-01

    High opening injection pressures (OIPs) have been shown to predict sustained needle tip contact with the roots of the brachial plexus. Such roots have a uniquely high ratio of fascicular versus connective tissue. It is unknown if this relationship is preserved during multifascicular nerve blockade. We hypothesized that OIP can predict needle-nerve contact during femoral nerve block, as well as detect needle contact with the fascia iliaca. Twenty adults scheduled for femoral block were recruited. Using ultrasound, a 22-gauge needle was sequentially placed in 4 locations: indenting the fascia iliaca, advanced through the fascia iliaca while lateral to the nerve, slightly indenting the femoral nerve, and withdrawn from the nerve 1 mm. At each location, the OIP required to initiate an injection of 1 mL D5W (5% dextrose in water) at 10 mL/min was recorded. Blinded investigators performed evaluations and aborted injections when an OIP of 15 psi was reached. Opening injection pressure was 15 psi or greater for 90% and 100% of cases when the needle indented the femoral nerve and fascia iliaca, respectively. Opening injection pressure was less than 15 psi for all 20 patients when the needle was withdrawn 1 mm from the nerve as well as at the subfascial position (McNemar χ2 P fascia iliaca (100%). Needle tip positions not indenting these structures were associated with OIP of less than 15 psi (100%).

  16. Design of a high order Campbelling mode measurement system using open source hardware

    Science.gov (United States)

    Izarra, G. de; Elter, Zs.; Jammes, C.

    2016-12-01

    This paper reviews a new real-time measurement instrument dedicated for online neutron monitoring with fission chambers in nuclear reactors. The instrument implements the higher order Campbelling methods and self-monitoring capabilities on an open source development board. The board includes an CPU/FPGA System on a Chip. The feasibility of the measurement instrument was tested both in laboratory with a signal generator and in the Minerve reactor. It is shown that the instrument provides reliable and robust count rate estimation over a wide reactor power range based on the third order statistics of the fission chamber signal. In addition, the system is able to identify whether the measured count rate change is due to the malfunction of the detector or due to the change in the neutron flux. The applied self-monitoring method is based on the spectral properties of the fission chamber signal. During the experimental verification, the considered malfunction was the change of the polarization voltage.

  17. Highly conductive, transparent flexible films based on open rings of multi-walled carbon nanotubes

    Energy Technology Data Exchange (ETDEWEB)

    Ko, Wen-Yin; Su, Jun-Wei; Guo, Chian-Hua; Fu, Shu-Juan; Hsu, Chuen-Yuan; Lin, Kuan-Jiuh, E-mail: kjlin@dragon.nchu.edu.tw

    2011-09-01

    Open rings of multi-walled carbon nanotubes were stacked to form porous networks on a poly(ethylene terephthalate) substrate to form a flexible conducting film (MWCNT-PET) with good electrical conductivity and transparency by a combination of ultrasonic atomization and spin-coating technique. To enhance the electric flexibility, we spin-coated a cast film of poly(vinyl alcohol) onto the MWCNT-PET substrate, which then underwent a thermo-compression process. Field-emission scanning electron microscopy of the cross-sectional morphology illustrates that the film has a robust network with a thickness of {approx} 175 nm, and it remarkably exhibits a sheet resistance of approximately 370 {Omega}/sq with {approx} 77% transmittance at 550 nm even after 500 bending cycles. This electrical conductivity is much superior to that of other MWCNT-based transparent flexible films.

  18. Modified Dwyer osteotomy with rotation and reinsertion of autograft bone wedge for residual heel deformity despite previous delayed subtalar joint arthrodesis after calcaneal fracture.

    Science.gov (United States)

    Boffeli, Troy J; Abben, Kyle W

    2014-01-01

    Calcaneal fracture patterns vary widely, and many factors determine the type and timing of the treatment rendered. Severe calcaneus fractures involving joint damage, loss of heel height, and varus deformity of the tuberosity are ideally treated with open reduction and internal fixation to repair the joint surface and re-establish anatomic structure. This is not always possible owing to delayed presentation, soft tissue compromise, unrelated injuries, unstable medical condition, or lack of expertise by the treating physician. We present the case of a patient who had residual forefoot and rearfoot deformity despite undergoing delayed subtalar joint arthrodesis at an outside hospital 10 years before for a calcaneal fracture that was initially treated nonoperatively. At 4 years of follow-up after modified Dwyer calcaneal osteotomy with rotation and reinsertion of the autograft bone wedge and Cotton midfoot osteotomy, the postoperative gait was relatively normal, other than the expected lack of hindfoot mobility. The lateral column pain was resolved. The patient remained highly satisfied with the outcome at long-term follow-up of 48 months, with improved heel alignment, lack of a wide stance gait, a functional medial column, and a relatively normal gait. This case demonstrates the value of periarticular calcaneal osteotomies without the need to revise the subtalar joint arthrodesis for this challenging clinical situation. Copyright © 2014 American College of Foot and Ankle Surgeons. Published by Elsevier Inc. All rights reserved.

  19. First direct dating of Late Pleistocene ice-wedges by AMS

    NARCIS (Netherlands)

    Vasil'chuk, YK; van der Plicht, J; Jungner, H; Sonninen, E; Vasil'chuk, AC; Vasil'chuk, Yurij K.; Vasil'chuk, Alla C.

    2000-01-01

    We present the first direct dating by C-14-accelerator mass spectrometry of three Late Pleistocene syngenetic ice-wedges from the Seyaha cross-section. They are representative of permafrost with multistage ice-wedges from the North of Western Siberia. The most important result is the clear vertical

  20. Revisit the classical Newmark displacement method for earthquake-induced wedge slide

    Science.gov (United States)

    Yang, Che-Ming; Cheng, Hui-Yun; Wu, Wen-Jie; Hsu, Chang-Hsuan; Dong, Jia-Jyun; Lee, Chyi-Tyi

    2016-04-01

    Newmark displacement method has been widely used to study the earthquake-induced landslides and adopted to explore the initiation and kinematics of catastrophic planar failure in recent years. However, surprisingly few researchers utilize the Newmark displacement method to study the earthquake-induced wedge slide. The classical Newmark displacement method for earthquake-induced wedge sliding assumed the wedge is rigid and the vertical acceleration, as well as the horizontal acceleration perpendicular to the sliding direction, is neglected. Moreover, the friction coefficients on the weak planes are assumed as unchanged during sliding. The purpose of this study is to test the reasonableness of the aforementioned assumptions. This study uses Newmark displacement method incorporating the rigid wedge method (RWM) and maximum shear stress method (MSSM) to evaluate the influence of wedge deformation. We design the geometry of the wedge and input the synthetic seismicity to trigger the wedge slide. The influence for neglecting the vertical and horizontal (perpendicular to the sliding direction) accelerations is also assessed. Besides, this research incorporates the velocity-displacement dependent friction law in the analysis to evaluate the influence of constant friction coefficient assumption. Result of this study illustrated that the aforementioned assumptions have significant effects on the calculated permeant displacement, moving speed, and failure initiation. To conclude, this study provides new insights on the initiation and kinematics of an earthquake induced wedge slide.

  1. Enhancement of linear and second-order hyperpolarizabilities in wedge-shaped nanostructures

    Science.gov (United States)

    Jayabalan, J.; Singh, Manoranjan P.; Rustagi, K. C.

    2003-08-01

    Analytical solutions for the wave functions for free electrons inside a wedge-shaped quantum dot are reported. For silver wedge-shaped quantum dots, linear and second-order hyperpolarizabilities are calculated for various apex angles. It is found that linear and nonlinear hyperpolarizabilities both increase with decreasing apex angle.

  2. Duwamish Waterways Navigation Improvement Study: Analysis of Impacts on Water Quality and Salt Wedge Characteristics.

    Science.gov (United States)

    1981-02-01

    dissolved oxygen consumption in the saltwater wedge is emphasized. A section has also been prepared discussing sediment transport in the estuary...biomass produced and sedimented 23 1,000 800 00 0 400 Xi. . *-*’* 200 ox- :~. ---0 - .....’ ~ ’J FIGURE 6 Annual Dissolved Oxygen Consumption in the wedge

  3. Reflection of a converging cylindrical shock wave segment by a straight wedge

    Science.gov (United States)

    Gray, B.; Skews, B.

    2017-01-01

    As a converging cylindrical shock wave propagates over a wedge, the shock wave accelerates and the angle between the shock wave and the wedge decreases. This causes the conditions at the reflection point to move from what would be the irregular reflection domain for a straight shock wave into the regular reflection domain. This paper covers a largely qualitative study of the reflection of converging shock wave segments with Mach numbers between 1.2 and 2.1 by wedges inclined at angles between 15° and 60° from experimental and numerical results. The sonic condition conventionally used for predicting the type of reflection of straight shock waves was found to also be suitable for predicting the initial reflection of a curved shock wave. Initially regular reflections persisted until the shock was completely reflected by the wedge, whereas the triple point of initially irregular reflections was observed to return to the wedge surface, forming transitioned regular reflection. After the incident shock wave was completely reflected by the wedge, a shock wave focusing mechanism was observed to amplify the pressure on the surface of the wedge by a factor of up to 100 for low wedge angles.

  4. A quantum hybrid with a thin antenna at the vertex of a wedge

    Science.gov (United States)

    Carlone, Raffaele; Posilicano, Andrea

    2017-03-01

    We study the spectrum, resonances and scattering matrix of a quantum Hamiltonian on a "hybrid surface" consisting of a half-line attached by its endpoint to the vertex of a concave planar wedge. At the boundary of the wedge, outside the vertex, homogeneous Dirichlet conditions are imposed. The system is tunable by varying the measure of the angle at the vertex.

  5. Immediate and 1 week effects of laterally wedge insoles on gait biomechanics in healthy females.

    Science.gov (United States)

    Weinhandl, Joshua T; Sudheimer, Sarah E; Van Lunen, Bonnie L; Stewart, Kimberly; Hoch, Matthew C

    2016-03-01

    It is estimated that approximately 45% of the U.S. population will develop knee osteoarthritis, a disease that creates significant economic burdens in both direct and indirect costs. Laterally wedged insoles have been frequently recommended to reduce knee abduction moments and to manage knee osteoarthritis. However, it remains unknown whether the lateral wedge will reduce knee abduction moments over a prolonged period of time. Thus, the purposes of this study were to (1) examine the immediate effects of a laterally wedged insole in individuals normally aligned knees and (2) determine prolonged effects after the insole was worn for 1 week. Gait analysis was performed on ten women with and without a laterally wedged insole. After participants wore the wedges for a week, a second gait analysis was performed with and without the insole. The wedged insole did not affect peak knee abduction moment, although there was a significant increase in knee abduction angular impulse after wearing the insoles for 1 week. Furthermore, there was a significant increase in vertical ground reaction force at the instance of peak knee abduction moment with the wedges. While the laterally wedged insole used in the current study did not alter knee abduction moments as expected, other studies have shown alterations. Future studies should also examine a longer acclimation period, the influence of gait speed, and the effect of different shoe types with the insole.

  6. Pan-Arctic ice-wedge degradation in warming permafrost and its influence on tundra hydrology

    Science.gov (United States)

    Liljedahl, Anna K.; Boike, Julia; Daanen, Ronald P.; Fedorov, Alexander N.; Frost, Gerald V.; Grosse, Guido; Hinzman, Larry D.; Iijma, Yoshihiro; Jorgenson, Janet C.; Matveyeva, Nadya; Necsoiu, Marius; Raynolds, Martha K.; Romanovsky, Vladimir E.; Schulla, Jörg; Tape, Ken D.; Walker, Donald A.; Wilson, Cathy J.; Yabuki, Hironori; Zona, Donatella

    2016-04-01

    Ice wedges are common features of the subsurface in permafrost regions. They develop by repeated frost cracking and ice vein growth over hundreds to thousands of years. Ice-wedge formation causes the archetypal polygonal patterns seen in tundra across the Arctic landscape. Here we use field and remote sensing observations to document polygon succession due to ice-wedge degradation and trough development in ten Arctic localities over sub-decadal timescales. Initial thaw drains polygon centres and forms disconnected troughs that hold isolated ponds. Continued ice-wedge melting leads to increased trough connectivity and an overall draining of the landscape. We find that melting at the tops of ice wedges over recent decades and subsequent decimetre-scale ground subsidence is a widespread Arctic phenomenon. Although permafrost temperatures have been increasing gradually, we find that ice-wedge degradation is occurring on sub-decadal timescales. Our hydrological model simulations show that advanced ice-wedge degradation can significantly alter the water balance of lowland tundra by reducing inundation and increasing runoff, in particular due to changes in snow distribution as troughs form. We predict that ice-wedge degradation and the hydrological changes associated with the resulting differential ground subsidence will expand and amplify in rapidly warming permafrost regions.

  7. Technique for high axial shielding factor performance of large-scale, thin, open-ended, cylindrical Metglas magnetic shields

    CERN Document Server

    Malkowski, S; Hona, B; Mattie, C; Woods, D; Yan, H; Plaster, B; 10.1063/1.3605665

    2011-01-01

    Metglas 2705M is a low-cost commercially-available, high-permeability Cobalt-based magnetic alloy, provided as a 5.08-cm wide and 20.3-$\\mu$m thick ribbon foil. We present an optimized construction technique for single-shell, large-scale (human-size), thin, open-ended cylindrical Metglas magnetic shields. The measured DC axial and transverse magnetic shielding factors of our 0.61-m diameter and 1.83-m long shields in the Earth's magnetic field were 267 and 1500, for material thicknesses of only 122 $\\mu$m (i.e., 6 foil layers). The axial shielding performance of our single-shell Metglas magnetic shields, obtained without the use of magnetic shaking techniques, is comparable to the performance of significantly thicker, multiple-shell, open-ended Metglas magnetic shields in comparable-magnitude, low-frequency applied external fields reported previously in the literature.

  8. Next Generation Space Interconnect Standard (NGSIS): a modular open standards approach for high performance interconnects for space

    Science.gov (United States)

    Collier, Charles Patrick

    2017-04-01

    The Next Generation Space Interconnect Standard (NGSIS) effort is a Government-Industry collaboration effort to define a set of standards for interconnects between space system components with the goal of cost effectively removing bandwidth as a constraint for future space systems. The NGSIS team has selected the ANSI/VITA 65 OpenVPXTM standard family for the physical baseline. The RapidIO protocol has been selected as the basis for the digital data transport. The NGSIS standards are developed to provide sufficient flexibility to enable users to implement a variety of system configurations, while meeting goals for interoperability and robustness for space. The NGSIS approach and effort represents a radical departure from past approaches to achieve a Modular Open System Architecture (MOSA) for space systems and serves as an exemplar for the civil, commercial, and military Space communities as well as a broader high reliability terrestrial market.

  9. Open access to high-level data and analysis tools in the CMS experiment at the LHC

    CERN Document Server

    Calderon Tazon, Alicia; Huffman, Michael Adam James; Lassila-Perini, Katri; McCauley, Thomas; Rao, Achintya Mahesh; Rodriguez Marrero, Ana Yaiza; Sexton-Kennedy, Elizabeth

    2015-01-01

    The CMS experiment, in recognition of its commitment to datapreservation and open access as well as to education and outreach, hasmade its first public release of high-level data up to half of theproton-proton collision data at 7 TeV from 2010 in CMS Analysis ObjectData format. CMS has prepared, in collaboration with CERN and theother LHC experiments, an open data web portal based on Invenio. Theportal provides access to CMS public data as well as to analysis toolsand documentation for the public. The tools include an event displayand histogram application that run in the browser. In addition avirtual machine is available which contains a CMS software environmentalong with XRootD access to the data. Within the virtual machine thepublic can analyse CMS data; example code is provided. We describe theaccompanying tools and documentation and discuss the first experienceof data use.

  10. How partnership accelerates Open Science: High Energy Physics and INSPIRE, a case study of a complex repository ecosystem

    CERN Document Server

    AUTHOR|(CDS)2079501; Hecker, Bernard Louis; Holtkamp, Annette; Mele, Salvatore; O'Connell, Heath; Sachs, Kirsten; Simko, Tibor; Schwander, Thorsten

    2013-01-01

    Public calls, agency mandates and scientist demand for Open Science are by now a reality with different nuances across diverse research communities. A complex “ecosystem” of services and tools, mostly communityDdriven, will underpin this revolution in science. Repositories stand to accelerate this process, as “openness” evolves beyond text, in lockstep with scholarly communication. We present a case study of a global discipline, HighDEnergy Physics (HEP), where most of these transitions have already taken place in a “social laboratory” of multiple global information services interlinked in a complex, but successful, ecosystem at the service of scientists. We discuss our firstDhand experience, at a technical and organizational level, of leveraging partnership across repositories and with the user community in support of Open Science, along threads relevant to the OR2013 community.

  11. Investigation of a Wedge Adhesion Test for Edge Seals

    Energy Technology Data Exchange (ETDEWEB)

    Kempe, Michael; Wohlgemuth, John; Miller, David; Postak, Lori; Booth, Dennis; Phillips, Nancy

    2016-09-26

    Many photovoltaic (PV) technologies have been found to be sensitive to moisture that diffuses into a PV package. Even with the use of impermeable frontsheets and backsheets, moisture can penetrate from the edges of a module. To limit this moisture ingress pathway from occurring, manufacturers often use a low permeability polyisobutylene (PIB) based edge seal filled with desiccant to further restrict moisture ingress. Moisture ingress studies have shown that these materials are capable of blocking moisture for the 25-year life of a module; but to do so, they must remain well-adhered and free of cracks. This work focuses on adapting the Boeing Wedge test for use with edge seals laminated using glass substrates as part of a strategy to assess the long-term durability of edge seals. The advantage of this method is that it duplicates the residual stresses and strains that a glass/glass module may have when the lamination process results in some residual glass bending that puts the perimeter in tension. Additionally, this method allows one to simultaneously expose the material to thermal stress, humidity, mechanical stress, and ultraviolet radiation. The disadvantage of this method generally is that we are limited by the fracture toughness of the glass substrates that the edge seal is adhered to. However, the low toughness of typical uncrosslinked or sparsely crosslinked PIB makes them suitable for this technique. We present data obtained during the development of the wedge test for use with PV edge seal materials. This includes development of the measuring techniques and evaluation of the test method with relevant materials. We find consistent data within a given experiment, along with the theoretical independence of fracture toughness measurements with wedge thickness. This indicates that the test methodology is reproducible. However, even though individual experimental sets are consistent, the reproducibility between experimental sets is poor. We believe this may be

  12. Investigation of a wedge adhesion test for edge seals

    Science.gov (United States)

    Kempe, Michael; Wohlgemuth, John; Miller, David; Postak, Lori; Booth, Dennis; Phillips, Nancy

    2016-09-01

    Many photovoltaic (PV) technologies have been found to be sensitive to moisture that diffuses into a PV package. Even with the use of impermeable frontsheets and backsheets, moisture can penetrate from the edges of a module. To limit this moisture ingress pathway from occurring, manufacturers often use a low permeability polyisobutylene (PIB) based edge seal filled with desiccant to further restrict moisture ingress. Moisture ingress studies have shown that these materials are capable of blocking moisture for the 25-year life of a module; but to do so, they must remain well-adhered and free of cracks. This work focuses on adapting the Boeing Wedge test for use with edge seals laminated using glass substrates as part of a strategy to assess the long-term durability of edge seals. The advantage of this method is that it duplicates the residual stresses and strains that a glass/glass module may have when the lamination process results in some residual glass bending that puts the perimeter in tension. Additionally, this method allows one to simultaneously expose the material to thermal stress, humidity, mechanical stress, and ultraviolet radiation. The disadvantage of this method generally is that we are limited by the fracture toughness of the glass substrates that the edge seal is adhered to. However, the low toughness of typical uncrosslinked or sparsely crosslinked PIB makes them suitable for this technique. We present data obtained during the development of the wedge test for use with PV edge seal materials. This includes development of the measuring techniques and evaluation of the test method with relevant materials. We find consistent data within a given experiment, along with the theoretical independence of fracture toughness measurements with wedge thickness. This indicates that the test methodology is reproducible. However, even though individual experimental sets are consistent, the reproducibility between experimental sets is poor. We believe this may be

  13. The effect of shoe design and lateral wedging on knee loading

    DEFF Research Database (Denmark)

    Mølgaard, Carsten; Kersting, Uwe G.

    The increasing number of patients with developing osteoarthritis is accompanied by a growing scientific interest in non-operative early treatment strategies. It is generally believed that laterally wedged insoles can change the distribution of the knee loading, but the importance of footwear design......-dimensional gait analysis. Barefoot walking, walking in a running shoe, an Oxford-type leather shoe, and a rocker shoe were analyzed. The shoes were tested both with and without a 10-degree full length laterally wedged insole. Results: Similar, significant reductions in the peak knee adduction moment with lateral...... wedges were observed in all three types of shoes. However, differences between shoe design were of similar magnitude as the effect of laterally wedged insoles. Only marginal changes in muscle activity for lateral hamstrings during barefoot toe-out walking and gastrocnemius when using the Oxford wedged...

  14. Bonding mechanism of ultrasonic wedge bonding of copper wire on Au/Ni/Cu substrate

    Institute of Scientific and Technical Information of China (English)

    TIAN Yan-hong; WANG Chun-qing; Y. Norman ZHOU

    2008-01-01

    The ultrasonic wedge bonding with d25 μm copper wire was achieved on Au/Ni plated Cu substrate at ambient temperature. Ultrasonic wedge bonding mechanism was investigated by using SEM/EDX, pull test, shear test and microhardness test. The results show that the thinning of the Au layer occurs directly below the center of the bonding tool with the bonding power increasing. The interdiffusion between copper wire and Au metallization during the wedge bonding is assumed negligible, and the wedge bonding is achieved by wear action induced by ultrasonic vibration. The ultrasonic power contributes to enhance the deformation of copper wire due to ultrasonic softening effect which is then followed by the strain hardening of the copper wedge bonding.

  15. Thrust fault growth within accretionary wedges: New Insights from 3D seismic reflection data

    Science.gov (United States)

    Orme, H.; Bell, R. E.; Jackson, C. A. L.

    2015-12-01

    The shallow parts of subduction megathrust faults are typically thought to be aseismic and incapable of propagating seismic rupture. The 2011 Tohoku-Oki earthquake, however, ruptured all the way to the trench, proving that in some locations rupture can propagate through the accretionary wedge. An improved understanding of the structural character and physical properties of accretionary wedges is therefore crucial to begin to assess why such anomalously shallow seismic rupture occurs. Despite its importance, we know surprisingly little regarding the 3D geometry and kinematics of thrust network development in accretionary prisms, largely due to a lack of 3D seismic reflection data providing high-resolution, 3D images of entire networks. Thus our current understanding is largely underpinned by observations from analogue and numerical modelling, with limited observational data from natural examples. In this contribution we use PSDM, 3D seismic reflection data from the Nankai margin (3D Muroto dataset, available from the UTIG Academic Seismic Portal, Marine Geoscience Data System) to examine how imbricate thrust fault networks evolve during accretionary wedge growth. Previous studies have reported en-echelon thrust fault geometries from the NW part of the dataset, and have related this complex structure to seamount subduction. We unravel the evolution of faults within the protothrust and imbricate thrust zones by interpreting multiple horizons across faults and measuring fault displacement and fold amplitude along-strike; by doing this, we are able to investigate the three dimensional accrual of strain. We document a number of local displacement minima along-strike of faults, suggesting that, the protothrust and imbricate thrusts developed from the linkage of smaller, previously isolated fault segments. We also demonstrate that the majority of faults grew upward from the décollement, although there is some evidence for downward fault propagation. Our observations

  16. Big mantle wedge, anisotropy, slabs and earthquakes beneath the Japan Sea

    Science.gov (United States)

    Zhao, Dapeng

    2017-09-01

    The Japan Sea is a part of the western Pacific trench-arc-backarc system and has a complex bathymetry and intense seismic activities in the crust and upper mantle. Local seismic tomography revealed strong lateral heterogeneities in the crust and uppermost mantle beneath the eastern margin of the Japan Sea, which was determined using P and S wave arrival times of suboceanic earthquakes relocated precisely with sP depth phases. Ambient-noise tomography revealed a thin crust and a thin lithosphere beneath the Japan Sea and significant low-velocity (low-V) anomalies in the shallow mantle beneath the western and eastern margins of the Japan Sea. Observations with ocean-bottom seismometers and electromagnetometers revealed low-V and high-conductivity anomalies at depths of 200-300 km in the big mantle wedge (BMW) above the subducting Pacific slab, and the anomalies are connected with the low-V zone in the normal mantle wedge beneath NE Japan, suggesting that both shallow and deep slab dehydrations occur and contribute to the arc and back-arc magmatism. The Pacific slab has a simple geometry beneath the Japan Sea, and earthquakes occur actively in the slab down to a depth of ∼600 km beneath the NE Asian margin. Teleseismic P and S wave tomography has revealed that the Philippine Sea plate has subducted aseismically down to the mantle transition zone (MTZ, 410-660 km) depths beneath the southern Japan Sea and the Tsushima Strait, and a slab window is revealed within the aseismic Philippine Sea slab. Seismic anisotropy tomography revealed a NW-SE fast-velocity direction in the BMW, which reflects corner flows induced by the fast deep subduction of the Pacific slab. Large deep earthquakes (M > 7.0; depth > 500 km) occur frequently beneath the Japan Sea western margin, which may be related to the formation of the Changbai and Ulleung intraplate volcanoes. A metastable olivine wedge is revealed within the cold core of the Pacific slab at the MTZ depth, which may be related

  17. Performance of the High Sensitivity Open Source Multi-GNSS Assisted GNSS Reference Server.

    Science.gov (United States)

    Sarwar, Ali; Rizos, Chris; Glennon, Eamonn

    2015-06-01

    The Open Source GNSS Reference Server (OSGRS) exploits the GNSS Reference Interface Protocol (GRIP) to provide assistance data to GPS receivers. Assistance can be in terms of signal acquisition and in the processing of the measurement data. The data transfer protocol is based on Extensible Mark-up Language (XML) schema. The first version of the OSGRS required a direct hardware connection to a GPS device to acquire the data necessary to generate the appropriate assistance. Scenarios of interest for the OSGRS users are weak signal strength indoors, obstructed outdoors or heavy multipath environments. This paper describes an improved version of OSGRS that provides alternative assistance support from a number of Global Navigation Satellite Systems (GNSS). The underlying protocol to transfer GNSS assistance data from global casters is the Networked Transport of RTCM (Radio Technical Commission for Maritime Services) over Internet Protocol (NTRIP), and/or the RINEX (Receiver Independent Exchange) format. This expands the assistance and support model of the OSGRS to globally available GNSS data servers connected via internet casters. A variety of formats and versions of RINEX and RTCM streams become available, which strengthens the assistance provisioning capability of the OSGRS platform. The prime motivation for this work was to enhance the system architecture of the OSGRS to take advantage of globally available GNSS data sources. Open source software architectures and assistance models provide acquisition and data processing assistance for GNSS receivers operating in weak signal environments. This paper describes test scenarios to benchmark the OSGRSv2 performance against other Assisted-GNSS solutions. Benchmarking devices include the SPOT satellite messenger, MS-Based & MS-Assisted GNSS, HSGNSS (SiRFstar-III) and Wireless Sensor Networks Assisted-GNSS. Benchmarked parameters include the number of tracked satellites, the Time to Fix First (TTFF), navigation availability

  18. The use of sternal wedge osteotomy in pectus surgery: when is it necessary?

    Science.gov (United States)

    Kara, Murat; Gundogdu, Ahmet Gokhan; Kadioglu, Salih Zeki; Cayirci, Ertug Can; Taskin, Necati

    2016-09-01

    The Ravitch procedure is a well-established surgical procedure for correction of chest wall deformities. Sternal wedge osteotomy is an important part of this procedure. We studied the incidence of wedge osteotomy with respect to the type of chest wall deformity in patients undergoing surgical correction with the use of a recently developed chest wall stabilization system. A total of 47 patients, 39 (83%) male and 8 (17%) female with a mean age of 14.9 ± 2.1 years, underwent the Ravitch procedure. Twenty-four (51.1%) had pectus carinatum, 19 (40.4%) had pectus excavatum, and 4 (8.5%) had pectus arcuatum. A conventional or oblique sternal wedge osteotomy was performed as indicated, followed by chest wall stabilization using the MedXpert system. Of the 47 patients, 27 (57.4%) had a sternal wedge osteotomy. All cases of pectus arcuatum and redo cases underwent sternal wedge osteotomy. Pectus excavatum cases tended to have a greater incidence of wedge osteotomy compared to pectus carinatum cases (68.4% vs. 41.7%, p = 0.052). Patients with more resected ribs had a greater rate of wedge osteotomy (63.4%) compared to those with fewer resected ribs (16.7%, p = 0.043). A sternal wedge osteotomy is more commonly performed in patients with pectus excavatum compared to those with pectus carinatum. All redo and pectus arcuatum cases need a wedge osteotomy for proper correction. Wedge osteotomy is very likely in more aggressive corrections with more rib resections. © The Author(s) 2016.

  19. The Cu{sub 2}ZnSnS{sub 4} solar cell with high open circuit voltage

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Min; Ma, Xun; Jiang, Zhi; Li, Zhishan; Liu, Sijia; Lu, Yilei; Wang, Shurong, E-mail: shrw88@aliyun.com

    2017-03-15

    In this paper, the effects of two different sulfurization processes on the CZTS films were investigated, and the results indicated that a rapid high-temperature crystallization process after sulfurization was beneficial for CZTS thin films to obtain a compact and flat surface with large grains. However, a common sulfurization without rapid high-temperature crystallization process would easily lead to undesirable properties of films, such as rough surface with pin holes, which degenerate the performance of devices. Cu{sub 2}ZnSnS{sub 4} (CZTS) solar cell based on a rapid high-temperature process after sulfurization achieved a high open circuit voltage of 722 mV and the best efficiency 3.32% was obtained.

  20. Investigation on Twisting and Side Wall Opening Occurring in Curved Hat Channel Products Made of High Strength Steel Sheets

    Science.gov (United States)

    Takamura, Masato; Fukui, Ayako; Yano, Hiroshi; Hama, Takayuki; Sunaga, Hideyuki; Makinouchi, Akitake; Asakawa, Motoo

    2011-08-01

    High strength steel sheets are becoming increasingly important for the weight reduction of automotive bodies to meet the requirements for reduced environmental impact. However, dimensional defects resulting from springback are serious issues, and effective methods of predicting and reducing such defects are necessary. In this study, we numerically and experimentally analyzed the mechanisms of dimensional inaccuracies caused by springback occurring in curved hat channel deep drawing products. The analysis was based on the static explicit FEM software "TP-STRUCT" (the solver part is known as "STAMP3D"). The results of the experiments and simulations similarly show that the twist angle is positive (right-hand system) when the drawing height is relatively large. We calculated the twist torque around the longitudinal axis using the stress distributions obtained by FE analysis. Through the investigation of twist torque and its transition during the drawing and die removal processes, we found that the negative torque generated by side wall opening occurring in the die removal process is the dominant factor of the positive twist. Knowing such mechanisms of twist in cases with a relatively large drawing height, we attempted to explore methods of reducing side wall opening by giving the side wall a stepped shape with the eventual aim of reducing twist. Consequently, we concluded that the stepped shape on the side wall has marked effects of reducing side wall opening, mainly through the elimination of bending-unbending effects on die shoulders, which was verified by observing the stress distribution obtained by FE analysis.

  1. Fatigue crack behaviour: comparing three-point bend test and wedge splitting test data on vibrated concrete using Paris' law

    Directory of Open Access Journals (Sweden)

    S. Seitl

    2017-01-01

    Full Text Available The fatigue behaviour of concrete has become more important for the design of constructions due to the desire to build slimmer structures, which are more sensitive to fatigue loading. This article aims to evaluate and compare the fatigue crack propagation rate in vibrated concrete for four different stress ratios using the Paris-Erdogan law. The data evaluation in this article is based on crack mouth opening displacement (CMOD measurements from cyclic three-point bending tests on single edge notched beams and from wedge splitting tests on notched cubes, obtained from experiments at Ghent University. For this study, finite element analysis is used to obtain a mathematical relationship between the CMOD and the relative crack length a/W, as well as a relationship between the stress intensity ratio ∆K and a/W. The obtained mathematical relationships were then combined with the measured CMOD values to correlate the test data to the Paris-Erdogan law. Herein, the crack propagation rate da/dN is plotted against the corresponding stress intensity range ∆K in a log-log graph. In a final step, the Paris-Erdogan law parameters C and m were obtained through linear curve fitting on the data points from the obtained graphs. The parameters C and m are then used to compare and evaluate the fatigue crack behavior in vibrated concrete, and the differences between the results from the three-point bend tests and wedge splitting tests.

  2. Fast optical 3D form measurement of aspheres including determination of thickness and wedge and decenter errors

    Science.gov (United States)

    Stover, E.; Berger, G.; Wendel, M.; Petter, J.

    2015-10-01

    A method for non-contact 3D form testing of aspheric surfaces including determination of decenter and wedge errors and lens thickness is presented. The principle is based on the absolute measurement capability of multi-wavelength interferometry (MWLI). The approach produces high density 3D shape information and geometric parameters at high accuracy in short measurement times. The system allows inspection of aspheres without restrictions in terms of spherical departures, of segmented and discontinuous optics. The optics can be polished or ground and made of opaque or transparent materials.

  3. Vertebral body or intervertebral disc wedging: which contributes more to thoracolumbar kyphosis in ankylosing spondylitis patients?

    Science.gov (United States)

    Liu, Hao; Qian, Bang-Ping; Qiu, Yong; Wang, Yan; Wang, Bin; Yu, Yang; Zhu, Ze-Zhang

    2016-01-01

    Abstract Both vertebral body wedging and disc wedging are found in ankylosing spondylitis (AS) patients with thoracolumbar kyphosis. However, their relative contribution to thoracolumbar kyphosis is not fully understood. The objective of this study was to compare different contributions of vertebral and disc wedging to the thoracolumbar kyphosis in AS patients, and to analyze the relationship between the apical vertebral wedging angle and thoracolumbar kyphosis. From October 2009 to October 2013, a total of 59 consecutive AS patients with thoracolumbar kyphosis with a mean age of 38.1 years were recruited in this study. Based on global kyphosis (GK), 26 patients with GK < 70° were assigned to group A, and the other 33 patients with GK ≥ 70° were included in group B. Each GK was divided into disc wedge angles and vertebral wedge angles. The wedging angle of each disc and vertebra comprising the thoracolumbar kyphosis was measured, and the proportion of the wedging angle to the GK was calculated accordingly. Intergroup and intragroup comparisons were subsequently performed to investigate the different contributions of disc and vertebra to the GK. The correlation between the apical vertebral wedging angle and GK was calculated by Pearson correlation analysis. The duration of disease and sex were also recorded in this study. With respect to the mean disease duration, significant difference was observed between the two groups (P < 0.01). The wedging angle and wedging percentage of discs were significantly higher than those of vertebrae in group A (34.8° ± 2.5° vs 26.7° ± 2.7°, P < 0.01 and 56.6% vs 43.4%, P < 0.01), whereas disc wedging and disc wedging percentage were significantly lower than vertebrae in group B (37.6° ± 7.0° vs 50.1° ± 5.1°, P < 0.01 and 42.7% vs 57.3%, P < 0.01). The wedging of vertebrae was significantly higher in group B than in group A (50.1° ± 5.1° vs 26.7° ± 2.7°, P < 0

  4. The Eocimmerian history of Central Iran: the accretionary wedge of Anarak

    Science.gov (United States)

    Malaspina, Nadia; Zanchi, Andrea; Berra, Fabrizio; Javadi, Hamid Reza; Koohpeyma, Meysam; Ghassemi, Mohammad R.; Sheikholeslami, Mohammad Reza; Bergomi, Maria; Tunesi, Annalisa; Zanchetta, Stefano

    2013-04-01

    The Anarak region of Central Iran is a key area for the understanding of the Late Palaeozoic to Triassic Cimmerian evolution of Iran. The Anarak Metamorphic Complex (AMC) forms an E-W trending mountain ridge, which separates the Triassic of Nakhlak to the north from a continuous non-metamorphic Palaeozoic to Mesozoic sedimentary succession to the south and was interpreted as an accretionary wedge active from Late Palaeozoic to Triassic times. The AMC is sharply cross-cut westward by the Upper Cretaceous "Coloured Melange", consisting of low- to medium- grade metamorphic rocks with tectonically intercalated slivers of serpentinite often associated to blue schists. The occurrence of this rock association in Central Iran poses several questions regarding its evolution and especially on the number of Cimmerian (Palaeotethys) sutures (single rather than multiple) between Eurasia and Iran. The AMC includes several subunits (Morghab, Chah Gorbeh, Patyar, Palhavand Gneiss, Lakh Marble and Doshak) which differ for composition and/or metamorphic evolution. Based on field observations, the Morghab and Chah Gorbeh units suggest a common deformation and a similar metamorphic history, characterised by three major folding events. The first two events developed pervasive axial plane foliations causing a complete transposition of the primary stratigraphic characters. Folding was accompanied by two main metamorphic events, the latter showing retrogression from possible medium to low grade conditions. During the third folding stage, large-scale plunging to vertical open folds were superposed on previous folds in the area north of the Kuh-e Chah Gorbeh, deforming the previous penetrative foliations. In this frame, the Palhavand Gneiss can be considered as part of the same metamorphic unit which escaped a more pervasive low grade retrogression. Concerning the Patyar unit, previous studies considered the Lakh Marble as the lagoonal sediments of an atoll. Field analyses indicate that the

  5. Properties of the Open Cluster Tombaugh 1 from High-resolution Spectroscopy and uvbyCaHβ Photometry

    Science.gov (United States)

    Sales Silva, João V.; Carraro, Giovanni; Anthony-Twarog, Barbara J.; Moni Bidin, Christian; Costa, Edgardo; Twarog, Bruce A.

    2016-01-01

    Open clusters can be the key to deepening our knowledge on various issues involving the structure and evolution of the Galactic disk and details of stellar evolution because a cluster’s properties are applicable to all its members. However, the number of open clusters with detailed analysis from high-resolution spectroscopy or precision photometry imposes severe limitations on studies of these objects. To expand the number of open clusters with well-defined chemical abundances and fundamental parameters, we investigate the poorly studied, anticenter open cluster Tombaugh 1. Using precision uvbyCaHβ photometry and high-resolution spectroscopy, we derive the cluster’s reddening, obtain photometric metallicity estimates, and, for the first time, present a detailed abundance analysis of 10 potential cluster stars (nine clump stars and one Cepheid). Using the radial position from the cluster center and multiple color indices, we have isolated a sample of unevolved, probable single-star members of Tombaugh 1. From 51 stars, the cluster reddening is found to be E(b-y) = 0.221 ± 0.006 or E(B-V) = 0.303 ± 0.008, where the errors refer to the internal standard errors of the mean. The weighted photometric metallicity from m1 and hk is [Fe/H] = -0.10 ± 0.02, while a match to the Victoria-Regina Strömgren isochrones leads to an age of 0.95 ± 0.10 Gyr and an apparent modulus of (m-M) = 13.10 ± 0.10. Radial velocities identify six giants as probable cluster members, and the elemental abundances of Fe, Na, Mg, Al, Si, Ca, Ti, Cr, Ni, Y, Ba, Ce, and Nd have been derived for both the cluster and the field stars. Tombaugh 1 appears to be a typical inner thin disk, intermediate-age open cluster of slightly subsolar metallicity, located just beyond the solar circle, with solar elemental abundance ratios except for the heavy s-process elements, which are a factor of two above solar. Its metallicity is consistent with a steep metallicity gradient in the galactocentric region

  6. Thrust-related, diapiric, and extensional doming in a frontal orogenic wedge: example of the Montagne Noire, Southern French Hercynian Belt

    Science.gov (United States)

    Soula, Jean-Claude; Debat, Pierre; Brusset, Stéphane; Bessière, Gilbert; Christophoul, Frédéric; Déramond, Joachim

    2001-11-01

    The Montagne Noire, which is situated at the toe of the orogenic wedge of the French Massif Central South European Variscides, appears to be a well-suited area for studying the origin and evolution of middle to upper crustal domes adjacent to foreland basins. The data reported in the present paper show that the Montagne Noire dome is a particular type of basement-involved frontal culmination in an orogenic wedge and foreland basin system. This frontal culmination is characterized by a syn-contractional HT decompression recorded by clockwise PTt paths and widespread strata overturning in thrust and fold structures, which controlled the sedimentation in the adjacent foreland basin. These unusual characteristics are interpreted to be a result of the succession of thrusting, diapirism and extensional collapse. Antiformal stacking of syn-metamorphic thrust sheets controlled the first stages of the foreland basin development. Diapirism was essentially responsible for the HT decompression and widespread strata overturning. Extensional doming was a result of late- to post-metamorphic collapse acting on the pre-existing high-amplitude dome. Diapirism and associated isothermal decompression metamorphism, which constitute the essential difference between the Montagne Noire and 'ordinary' frontal ridges in orogenic wedges, were probably enhanced by a local partial melting of the upper to middle crust. It is suggested that the occurrence of these phenomena in front of an orogenic wedge was related to local over-thickening due to the superposition of an upper crustal antiformal stack on top of a lower crustal ramp anticline.

  7. Deep long-period earthquakes west of the volcanic arc in Oregon: evidence of serpentine dehydration in the fore-arc mantle wedge

    Science.gov (United States)

    Vidale, John E.; Schmidt, David A.; Malone, Stephen D.; Hotovec-Ellis, Alicia J.; Moran, Seth C.; Creager, Kenneth C.; Houston, Heidi

    2014-01-01

    Here we report on deep long-period earthquakes (DLPs) newly observed in four places in western Oregon. The DLPs are noteworthy for their location within the subduction fore arc: 40–80 km west of the volcanic arc, well above the slab, and near the Moho. These “offset DLPs” occur near the top of the inferred stagnant mantle wedge, which is likely to be serpentinized and cold. The lack of fore-arc DLPs elsewhere along the arc suggests that localized heating may be dehydrating the serpentinized mantle wedge at these latitudes and causing DLPs by dehydration embrittlement. Higher heat flow in this region could be introduced by anomalously hot mantle, associated with the western migration of volcanism across the High Lava Plains of eastern Oregon, entrained in the corner flow proximal to the mantle wedge. Alternatively, fluids rising from the subducting slab through the mantle wedge may be the source of offset DLPs. As far as we know, these are among the first DLPs to be observed in the fore arc of a subduction-zone system.

  8. REDBACK: an Open-Source Highly Scalable Simulation Tool for Rock Mechanics with Dissipative Feedbacks

    Science.gov (United States)

    Poulet, T.; Veveakis, M.; Paesold, M.; Regenauer-Lieb, K.

    2014-12-01

    Multiphysics modelling has become an indispensable tool for geoscientists to simulate the complex behaviours observed in their various fields of study where multiple processes are involved, including thermal, hydraulic, mechanical and chemical (THMC) laws. This modelling activity involves simulations that are computationally expensive and its soaring uptake is tightly linked to the increasing availability of supercomputing power and easy access to powerful nonlinear solvers such as PETSc (http://www.mcs.anl.gov/petsc/). The Multiphysics Object-Oriented Simulation Environment (MOOSE) is a finite-element, multiphysics framework (http://mooseframework.org) that can harness such computational power and allow scientists to develop easily some tightly-coupled fully implicit multiphysics simulations that run automatically in parallel on large clusters. This open-source framework provides a powerful tool to collaborate on numerical modelling activities and we are contributing to its development with REDBACK (https://github.com/pou036/redback), a module for Rock mEchanics with Dissipative feedBACKs. REDBACK builds on the tensor mechanics finite strain implementation available in MOOSE to provide a THMC simulator where the energetic formulation highlights the importance of all dissipative terms in the coupled system of equations. We show first applications of fully coupled dehydration reactions triggering episodic fluid transfer through shear zones (Alevizos et al, 2014). The dimensionless approach used allows focusing on the critical underlying variables which are driving the resulting behaviours observed and this tool is specifically designed to study material instabilities underpinning geological features like faulting, folding, boudinage, shearing, fracturing, etc. REDBACK provides a collaborative and educational tool which captures the physical and mathematical understanding of such material instabilities and provides an easy way to apply this knowledge to realistic

  9. Support for teaching technical subjects at high schools using an open robotic platform

    OpenAIRE

    PRŮCHA, Tomáš

    2015-01-01

    This diploma thesis deals with the use of robotic kits in teaching technical subject at high schools in the Czech Republic. The theoretical part describes the concepts of robotics and pedagogy. It deals with the history, types of robots, describes its components and provides an overview of the available robotic kits. It also examines the concepts and approaches in teaching, goals and activation methods. The results of research among students, alumni and teachers of high schools are summarized...

  10. Control of stomatal opening after growth at high relative air humidity

    OpenAIRE

    Rezaei Nejad, A.

    2007-01-01

    As a result of contemporary horticultural practices relative air humidities (RH) in greenhouses are often very high. In particular in cut flowers, this results in quality problems after harvest when flowers are transferred to low RH conditions at the consumers. The quality problems are related to excessive water loss caused by a disturbance in normal functioning of stomata. The general aim of this study was to investigate the effects of high RH during growth on the stomatal response characte...

  11. Towards Open Access Publishing in High Energy Physics Report of the SCOAP3 Working Party

    CERN Document Server

    Bianco, S; Ferreira, P; Friend, F; Gargiulo, P; Hanania, R; Henrot-Versillé, S; Holtkamp, A; Igo-Kemenes, P; Jarroux-Declais, D; Jordão, M; Kämper, B-C; Krause, J; Lagrange, T; Le Diberder, F R; Lemasurier, A; Lengenfelder, A; Lindqvist, C M; Mele, S; Plaszczynski, S; Schimmer, R; Vigen, Jens; Voss, R; Wilbers, M; Yeomans, J; Zioutas, K

    2007-01-01

    This Report concerns the implementation of a process today supported by leading actors from the particle physics community, and worked through in detail by members of an international Working Party. The initiative offers an opportunity for the cost-effective dissemination of high-quality research articles in particle physics, enabling use of the new technologies of e-Science across the literature of High Energy physics.

  12. Burial and exhumation in a subduction wedge: Mutual constraints from thermomechanical modeling and natural P-T-t data (Schistes Lustrés, western Alps)

    Science.gov (United States)

    Yamato, P.; Agard, P.; Burov, E.; Le Pourhiet, L.; Jolivet, L.; Tiberi, C.

    2007-07-01

    The dynamic processes leading to synconvergent exhumation of high-pressure low-temperature (HP-LT) rocks at oceanic accretionary margins, as well as the mechanisms maintaining nearly steady state regime in most accretion prisms, remain poorly understood. The present study aims at getting better constraints on the rheology, thermal conductivity, and chemical properties of the sediments in subduction zones. To reach that goal, oceanic subduction is modeled using a forward visco-elasto-plastic thermomechanical code (PARA(O)VOZ-FLAC algorithm), and synthetic pressure-temperature-time (P-T-t) paths, predicted from numerical experiments, are compared with natural P-T-t paths. The study is focused on the well constrained Schistes Lustrés complex (SL: western Alps) which is thought to represent the fossil accretionary wedge of the Liguro-Piemontese Ocean. For convergence rates comparable to Alpine subduction rates (˜3 cm yr-1), the best-fitting results are obtained for high-viscosity, low-density wedge sediments and/or a strong lower continental crust. After a transition period of 3-5 Ma the modeled accretionary wedges reach a steady state which lasts over 20 Ma. Over that time span a significant proportion (˜35%) of sediments entering the wedge undergoes P-T conditions typical of the SL complex (˜15-20 kbar; 350-450°C) with similar P-T loops. Computed exhumation rates (<6 mm yr-1) are in agreement with observations (1-5 mm yr-1). In presence of a serpentinite layer below the oceanic crust, exhumation of oceanic material takes place at rates approaching 3 mm yr-1. In all experiments the total pressure in the accretionary wedge never deviated by more than ±10% from the lithostatic component.

  13. Deformation transients in the brittle regime: Insights from spring-wedge experiments

    Science.gov (United States)

    Rosenau, Matthias; Santimano, Tasca; Oncken, Onno

    2016-04-01

    Deformation of the earth's crust varies over timescales ranging from the seismic cycle to plate tectonic phases. Seismic cycles can generically be explained by sudden coseismic release of strain energy accumulated slowly over the interseismic period. The simplest models of such transient behavior is a spring-slider system where the spring stores elastic energy and the slider is characterized by static and dynamic friction at its base allowing cyclic occurrence of slip instabilities. Here we extend this model by allowing the slider to deform in an accretionary wedge type system. Because cyclic thrust formation is associated with bulk strain weakening this should introduce slip instabilities at the time-scale of accretionary cycles superimposed on seismic cycles which are controlled by static and dynamic friction at the wedge base. To test this hypothesis we set up sandbox-type experiments where the backwall is not rigid but elastic. We vary stiffness, friction coefficients and amount of strain weakening during fault formation and reactivation within realistic ranges when scaled to nature and monitor backwall push force and surface deformation at high resolution. We observe slip instabilities both at seismic and accretionary cycle scale. Depending on the ratio of the amount of strain weakening to elastic stiffness, shortening rate increases transiently by a factor of 2-3 during fault growth. Applied to nature our observation suggests that episodic deformation transients might be interpreted as longterm slip instabilities related to crustal weakening at all relevant spatial scales: At local scale "slow earthquakes" might be interpreted as the result of the interplay between matrix stiffness and strain weakening in fault gouge material. At regional scale, applying buckling theory, we predict that deformation zones bordered by "soft" oceanic plates (e.g. the Andes) are more susceptible to deformation transients than "stiff" intracontinental settings (e.g. the Himalaya).

  14. Brittle materials at high-loading rates: an open area of research

    Science.gov (United States)

    Forquin, Pascal

    2017-01-01

    Brittle materials are extensively used in many civil and military applications involving high-strain-rate loadings such as: blasting or percussive drilling of rocks, ballistic impact against ceramic armour or transparent windshields, plastic explosives used to damage or destroy concrete structures, soft or hard impacts against concrete structures and so on. With all of these applications, brittle materials are subjected to intense loadings characterized by medium to extremely high strain rates (few tens to several tens of thousands per second) leading to extreme and/or specific damage modes such as multiple fragmentation, dynamic cracking, pore collapse, shearing, mode II fracturing and/or microplasticity mechanisms in the material. Additionally, brittle materials exhibit complex features such as a strong strain-rate sensitivity and confining pressure sensitivity that justify expending greater research efforts to understand these complex features. Currently, the most popular dynamic testing techniques used for this are based on the use of split Hopkinson pressure bar methodologies and/or plate-impact testing methods. However, these methods do have some critical limitations and drawbacks when used to investigate the behaviour of brittle materials at high loading rates. The present theme issue of Philosophical Transactions A provides an overview of the latest experimental methods and numerical tools that are currently being developed to investigate the behaviour of brittle materials at high loading rates. This article is part of the themed issue 'Experimental testing and modelling of brittle materials at high strain rates'.

  15. Brittle materials at high-loading rates: an open area of research

    Science.gov (United States)

    2017-01-01

    Brittle materials are extensively used in many civil and military applications involving high-strain-rate loadings such as: blasting or percussive drilling of rocks, ballistic impact against ceramic armour or transparent windshields, plastic explosives used to damage or destroy concrete structures, soft or hard impacts against concrete structures and so on. With all of these applications, brittle materials are subjected to intense loadings characterized by medium to extremely high strain rates (few tens to several tens of thousands per second) leading to extreme and/or specific damage modes such as multiple fragmentation, dynamic cracking, pore collapse, shearing, mode II fracturing and/or microplasticity mechanisms in the material. Additionally, brittle materials exhibit complex features such as a strong strain-rate sensitivity and confining pressure sensitivity that justify expending greater research efforts to understand these complex features. Currently, the most popular dynamic testing techniques used for this are based on the use of split Hopkinson pressure bar methodologies and/or plate-impact testing methods. However, these methods do have some critical limitations and drawbacks when used to investigate the behaviour of brittle materials at high loading rates. The present theme issue of Philosophical Transactions A provides an overview of the latest experimental methods and numerical tools that are currently being developed to investigate the behaviour of brittle materials at high loading rates. This article is part of the themed issue ‘Experimental testing and modelling of brittle materials at high strain rates’. PMID:27956517

  16. Selective enrichment and production of highly urease active bacteria by non-sterile (open) chemostat culture.

    Science.gov (United States)

    Cheng, Liang; Cord-Ruwisch, Ralf

    2013-10-01

    In general, bioprocesses can be subdivided into naturally occurring processes, not requiring sterility (e.g., beer brewing, wine making, lactic acid fermentation, or biogas digestion) and other processes (e.g., the production of enzymes and antibiotics) that typically require a high level of sterility to avoid contaminant microbes overgrowing the production strain. The current paper describes the sustainable, non-sterile production of an industrial enzyme using activated sludge as inoculum. By using selective conditions (high pH, high ammonia concentration, and presence of urea) for the target bacterium, highly active ureolytic bacteria, physiologically resembling Sporosarcina pasteurii were reproducibly enriched and then continuously produced via chemostat operation of the bioreactor. When using a pH of 10 and about 0.2 M urea in a yeast extract-based medium, ureolytic bacteria developed under aerobic chemostat operation at hydraulic retention times of about 10 h with urease levels of about 60 μmol min⁻¹ ml⁻¹ culture. For cost minimization at an industrial scale the costly protein-rich yeast extract medium could be replaced by commercial milk powder or by lysed activated sludge. Glutamate, molasses, or glucose-based media did not result in the enrichment of ureolytic bacteria by the chemostat. The concentration of intracellular urease was sufficiently high such that the produced raw effluent from the reactor could be used directly for biocementation in the field.

  17. Efficient and accurate local single reference correlation methods for high-spin open-shell molecules using pair natural orbitals

    Science.gov (United States)

    Hansen, Andreas; Liakos, Dimitrios G.; Neese, Frank

    2011-12-01

    A production level implementation of the high-spin open-shell (spin unrestricted) single reference coupled pair, quadratic configuration interaction and coupled cluster methods with up to doubly excited determinants in the framework of the local pair natural orbital (LPNO) concept is reported. This work is an extension of the closed-shell LPNO methods developed earlier [F. Neese, F. Wennmohs, and A. Hansen, J. Chem. Phys. 130, 114108 (2009), 10.1063/1.3086717; F. Neese, A. Hansen, and D. G. Liakos, J. Chem. Phys. 131, 064103 (2009), 10.1063/1.3173827]. The internal space is spanned by localized orbitals, while the external space for each electron pair is represented by a truncated PNO expansion. The laborious integral transformation associated with the large number of PNOs becomes feasible through the extensive use of density fitting (resolution of the identity (RI)) techniques. Technical complications arising for the open-shell case and the use of quasi-restricted orbitals for the construction of the reference determinant are discussed in detail. As in the closed-shell case, only three cutoff parameters control the average number of PNOs per electron pair, the size of the significant pair list, and the number of contributing auxiliary basis functions per PNO. The chosen threshold default values ensure robustness and the results of the parent canonical methods are reproduced to high accuracy. Comprehensive numerical tests on absolute and relative energies as well as timings consistently show that the outstanding performance of the LPNO methods carries over to the open-shell case with minor modifications. Finally, hyperfine couplings calculated with the variational LPNO-CEPA/1 method, for which a well-defined expectation value type density exists, indicate the great potential of the LPNO approach for the efficient calculation of molecular properties.

  18. Biomechanical effects of lateral and medial wedge insoles on unilateral weight bearing.

    Science.gov (United States)

    Sawada, Tomonori; Kito, Nobuhiro; Yukimune, Masaki; Tokuda, Kazuki; Tanimoto, Kenji; Anan, Masaya; Takahashi, Makoto; Shinkoda, Koichi

    2016-01-01

    [Purpose] Lateral wedge insoles reduce the peak external knee adduction moment and are advocated for patients with knee osteoarthritis. However, some patients demonstrate adverse biomechanical effects with treatment. In this study, we examined the immediate effects of lateral and medial wedge insoles under unilateral weight bearing. [Subjects and Methods] Thirty healthy young adults participated in this study. The subjects were assessed by using the foot posture index, and were divided into three groups: normal foot, pronated foot, and supinated foot groups. The knee adduction moment and knee-ground reaction force lever arm under the studied conditions were measured by using a three-dimensional motion capture system and force plates. [Results] In the normal and pronated groups, the change in knee adduction moment significantly decreased under the lateral wedge insole condition compared with the medial wedge insole condition. In the normal group, the change in the knee-ground reaction force lever arm also significantly decreased under the lateral wedge insole condition than under the medial wedge insole condition. [Conclusion] Lateral wedge insoles significantly reduced the knee adduction moment and knee-ground reaction force lever arm during unilateral weight bearing in subjects with normal feet, and the biomechanical effects varied according to individual foot alignment.

  19. Control of stomatal opening after growth at high relative air humidity

    NARCIS (Netherlands)

    Rezaei Nejad, A.

    2007-01-01

    As a result of contemporary horticultural practices relative air humidities (RH) in greenhouses are often very high. In particular in cut flowers, this results in quality problems after harvest when flowers are transferred to low RH conditions at the consumers. The quality problems are related to ex

  20. High-throughput open source computational methods for genetics and genomics

    NARCIS (Netherlands)

    Prins, J.C.P.

    2015-01-01

    Biology is increasingly data driven by virtue of the development of high-throughput technologies, such as DNA and RNA sequencing. Computational biology and bioinformatics are scientific disciplines that cross-over between the disciplines of biology, informatics and statistics; which is clearly refle

  1. High-throughput open source computational methods for genetics and genomics

    NARCIS (Netherlands)

    Prins, J.C.P.

    2015-01-01

    Biology is increasingly data driven by virtue of the development of high-throughput technologies, such as DNA and RNA sequencing. Computational biology and bioinformatics are scientific disciplines that cross-over between the disciplines of biology, informatics and statistics; which is clearly

  2. High floral bud abscission and lack of open flower abscission in Dendrobium cv. Miss Teen: rapid reduction of ethylene sensitivity in the abscission zone

    NARCIS (Netherlands)

    Bunya-atichart, K.; Ketsa, S.; Doorn, van W.G.

    2006-01-01

    We studied the abscission of floral buds and open flowers in cut Dendrobium inflorescences. Abscission of floral buds was high and sensitive to ethylene in all cultivars studied. Many open flowers abscised in most cultivars, but cv. Willie exhibited only small amount of floral fall and cv. Miss Teen

  3. Clinical potentials of methylator phenotype in stage 4 high-risk neuroblastoma: an open challenge.

    Directory of Open Access Journals (Sweden)

    Barbara Banelli

    Full Text Available Approximately 20% of stage 4 high-risk neuroblastoma patients are alive and disease-free 5 years after disease onset while the remaining experience rapid and fatal progression. Numerous findings underline the prognostic role of methylation of defined target genes in neuroblastoma without taking into account the clinical and biological heterogeneity of this disease. In this report we have investigated the methylation of the PCDHB cluster, the most informative member of the "Methylator Phenotype" in neuroblastoma, hypothesizing that if this epigenetic mark can predict overall and progression free survival in high-risk stage 4 neuroblastoma, it could be utilized to improve the risk stratification of the patients, alone or in conjunction with the previously identified methylation of the SFN gene (14.3.3sigma that can accurately predict outcome in these patients. We have utilized univariate and multivariate models to compare the prognostic power of PCDHB methylation in terms of overall and progression free survival, quantitatively determined by pyrosequencing, with that of other markers utilized for the patients' stratification utilizing methylation thresholds calculated on neuroblastoma at stage 1-4 and only on stage 4, high-risk patients. Our results indicate that PCDHB accurately distinguishes between high- and intermediate/low risk stage 4 neuroblastoma in agreement with the established risk stratification criteria. However PCDHB cannot predict outcome in the subgroup of stage 4 patients at high-risk whereas methylation levels of SFN are suggestive of a "methylation gradient" associated with tumor aggressiveness as suggested by the finding of a higher threshold that defines a subset of patients with an extremely severe disease (OS <24 months. Because of the heterogeneity of neuroblastoma we believe that clinically relevant methylation markers should be selected and tested on homogeneous groups of patients rather than on patients at all stages.

  4. An open source based high content screening method for cell biology laboratories investigating cell spreading and adhesion.

    Directory of Open Access Journals (Sweden)

    Andre Schmandke

    Full Text Available BACKGROUND: Adhesion dependent mechanisms are increasingly recognized to be important for a wide range of biological processes, diseases and therapeutics. This has led to a rising demand of pharmaceutical modulators. However, most currently available adhesion assays are time consuming and/or lack sensitivity and reproducibility or depend on specialized and expensive equipment often only available at screening facilities. Thus, rapid and economical high-content screening approaches are urgently needed. RESULTS: We established a fully open source high-content screening method for identifying modulators of adhesion. We successfully used this method to detect small molecules that are able to influence cell adhesion and cell spreading of Swiss-3T3 fibroblasts in general and/or specifically counteract Nogo-A-Δ20-induced inhibition of adhesion and cell spreading. The tricyclic anti-depressant clomipramine hydrochloride was shown to not only inhibit Nogo-A-Δ20-induced cell spreading inhibition in 3T3 fibroblasts but also to promote growth and counteract neurite outgrowth inhibition in highly purified primary neurons isolated from rat cerebellum. CONCLUSIONS: We have developed and validated a high content screening approach that can be used in any ordinarily equipped cell biology laboratory employing exclusively freely available open-source software in order to find novel modulators of adhesion and cell spreading. The versatility and adjustability of the whole screening method will enable not only centers specialized in high-throughput screens but most importantly also labs not routinely employing screens in their daily work routine to investigate the effects of a wide range of different compounds or siRNAs on adhesion and adhesion-modulating molecules.

  5. Development of Thin Film Amorphous Silicon Tandem Junction Based Photocathodes Providing High Open-Circuit Voltages for Hydrogen Production

    Directory of Open Access Journals (Sweden)

    F. Urbain

    2014-01-01

    Full Text Available Hydrogenated amorphous silicon thin film tandem solar cells (a-Si:H/a-Si:H have been developed with focus on high open-circuit voltages for the direct application as photocathodes in photoelectrochemical water splitting devices. By temperature variation during deposition of the intrinsic a-Si:H absorber layers the band gap energy of a-Si:H absorber layers, correlating with the hydrogen content of the material, can be adjusted and combined in a way that a-Si:H/a-Si:H tandem solar cells provide open-circuit voltages up to 1.87 V. The applicability of the tandem solar cells as photocathodes was investigated in a photoelectrochemical cell (PEC measurement set-up. With platinum as a catalyst, the a-Si:H/a-Si:H based photocathodes exhibit a high photocurrent onset potential of 1.76 V versus the reversible hydrogen electrode (RHE and a photocurrent of 5.3 mA/cm2 at 0 V versus RHE (under halogen lamp illumination. Our results provide evidence that a direct application of thin film silicon based photocathodes fulfills the main thermodynamic requirements to generate hydrogen. Furthermore, the presented approach may provide an efficient and low-cost route to solar hydrogen production.

  6. Possibility of titanium transportation within a mantle wedge: formation process of titanoclinohumite in Fujiwara dunite in Sanbagawa belt, Japan

    Directory of Open Access Journals (Sweden)

    S. Ishimaru

    2012-01-01

    Full Text Available Titinoclinohumite-bearing dunites from Fujiwara, the Sanbagawa metamorphic belt of high-pressure type, Japan, were described to examine the possibility of Ti mobility during metasomatism within the mantle wedge. The Fujiwara dunite body and surrounding high-pressure Sanbagawa schists possibly form a subduction complex, and the dunites are a good analogue to the mantle wedge overlying the slab. The Fujiwara dunites are of deserpentinization origin; the deserpentinized olivine is high in Fo (up to 96 and low in NiO (0.2 to 0.3 wt %, and contains magnetite inclusions. Titanoclinohumites are associated with the deserpentinized olivine, as lamellar intergrowth or veinlets, up to 1 cm in width. Other metamorphic minerals include antigorite, brucite, chlorite, ilmenite, perovskite, Ti-rich ludwigite, and carbonates. The protolith of the Fujiwara dunite was partially serpentinized cumulative dunites from intra-plate magma, containing relatively low-Fo (85 to 86 olivines and TiO2-rich (up to 3 wt % chromian spinels. The metamorphic olivines and titanoclinohumites contain micro-inclusions of methane (CH4 with or without serpentine and brucite. The source of Ti for titanoclinohumite was possibly the Ti-rich chromian spinel, but Ti was mobile through hydrocarbon-rich fluids, which were activated during the metamorphism. The hydrocarbons, of which remnants are carbonates and methane micro-inclusions, were derived from carbonaceous materials or bitumen, possibly incorporated in the precursory serpentinized and brecciated peridotite (= the protolith for the Fujiwara dunites before subduction. Ti can be mobile in the mantle wedge if hydrocarbons are available from the subducted slab.

  7. Assessment of Dose Calculation Accuracy of TiGRT Treatment Planning System for Physical Wedged fields in Radiotherapy

    Directory of Open Access Journals (Sweden)

    Bagher Farhood

    2016-09-01

    Full Text Available Introduction Wedge modifiers are commonly applied in external beam radiotherapy to change the dose distribution corresponding to the body contour and to obtain a uniform dose distribution within the target volume. Since the radiation dose delivered to the target must be within ±5% of the prescribed dose, accurate dose calculation by a treatment planning system (TPS is important. The objective of the present study was to quantify the dose calculation accuracy of TiGRT TPS for physical wedged fields in radiotherapy. Materials and Methods A Semiflex™ ionization chamber was used for dose measurements in a water phantom; TiGRT TPS was also applied for dose calculations. The central axis (i.e., high dose-small dose gradient, build-up (i.e., high dose-large dose gradient, off-axis (i.e., high dose-small dose gradient, and out-of-field (i.e., low dose-small dose gradient regions were evaluated in this study. Finally, the confidence limit values were obtained to quantify the dose calculation accuracy of TPS in these regions. Results The confidence limit values for the central axis, build-up, off-axis, and out-of-field regions were 1.01, 8.62, 1.79, and 55.24, respectively. Furthermore, the results showed that TiGRT TPS underestimated the dose of build-up and out-of-field regions for most points. Conclusion According to the results of the present study, it can be concluded that the dose calculation accuracy of TiGRT TPS for physical wedged fields in the central axis, build-up, and off-axis regions is adequate, while it is insufficient for out-of-field regions.

  8. Analysis of high performance conjugate heat transfer with the OpenPALM coupler

    Science.gov (United States)

    Duchaine, Florent; Jauré, Stéphan; Poitou, Damien; Quémerais, Eric; Staffelbach, Gabriel; Morel, Thierry; Gicquel, Laurent

    2015-01-01

    In many communities such as climate science or industrial design, to solve complex coupled problems with high fidelity external coupling of legacy solvers puts a lot of pressure on the tool used for the coupling. The precision of such predictions not only largely depends on simulation resolutions and the use of huge meshes but also on high performance computing to reduce restitution times. In this context, the current work aims at studying the scalability of code coupling on high performance computing architectures for a conjugate heat transfer problem. The flow solver is a Large Eddy Simulation code that has been already ported on massively parallel architectures. The conduction solver is based on the same data structure and thus shares the flow solver scalability properties. Accurately coupling solvers on massively parallel architectures while maintaining their scalability is challenging. It requires exchanging and treating information based on two different computational grids that are partitioned differently on a different number of cores. Such transfers have to be thought to maintain code scalabilities while maintaining numerical accuracy. This raises communication and high performance computing issues: transferring data from a distributed interface to another distributed interface in a parallel way and on a very large number of processors is not straightforward and solutions are not clear. Performance tests have been carried out up to 12 288 cores on the CURIE supercomputer (TGCC/CEA). Results show a good behavior of the coupled model when increasing the number of cores thanks to the fully distributed exchange process implemented in the coupler. Advanced analyses are carried out to draw new paths for future developments for coupled simulations: i.e. optimization of the data transfer protocols through asynchronous communications or coupling-aware preprocessing of the coupled models (mesh partitioning phase).

  9. An open-source highly scalable web service architecture for the Apertium machine translation engine

    OpenAIRE

    Sánchez-Cartagena, Víctor M.; Pérez-Ortiz, Juan Antonio

    2009-01-01

    Some machine translation services like Google Ajax Language API have become very popular as they make the collaboratively created contents of the web 2.0 available to speakers of many languages. One of the keys of its success is its clear and easy-to-use application programming interface (API) and a scalable and reliable service. This paper describes a highly scalable implementation of an Apertium-based translation web service, that aims to make contents available to speakers of lesser resour...

  10. METAREP: JCVI metagenomics reports—an open source tool for high-performance comparative metagenomics

    OpenAIRE

    Goll, Johannes; Rusch, Douglas B; Tanenbaum, David M.; Thiagarajan, Mathangi; Li, Kelvin; Methé, Barbara A.; Yooseph, Shibu

    2010-01-01

    Summary: JCVI Metagenomics Reports (METAREP) is a Web 2.0 application designed to help scientists analyze and compare annotated metagenomics datasets. It utilizes Solr/Lucene, a high-performance scalable search engine, to quickly query large data collections. Furthermore, users can use its SQL-like query syntax to filter and refine datasets. METAREP provides graphical summaries for top taxonomic and functional classifications as well as a GO, NCBI Taxonomy and KEGG Pathway Browser. Users can ...

  11. nDPI: Open-Source High-Speed Deep Packet Inspection

    DEFF Research Database (Denmark)

    Deri, Luca; Martinelli, Maurizio; Bujlow, Tomasz

    2014-01-01

    Network traffic analysis was traditionally limited to packet header, because the transport protocol and application ports were usually sufficient to identify the application protocol. With the advent of port-independent, peer-to-peer, and encrypted protocols, the task of identifying application p...... validated in various monitoring projects ranging from Linux kernel protocol classification, to analysis of 10 Gbit traffic, reporting both high protocol detection accuracy and efficiency....

  12. High Temperature Thermoplastic Additive Manufacturing Using Low-Cost, Open-Source Hardware

    Science.gov (United States)

    Gardner, John M.; Stelter, Christopher J.; Yashin, Edward A.; Siochi, Emilie J.

    2016-01-01

    Additive manufacturing (or 3D printing) via Fused Filament Fabrication (FFF), also known as Fused Deposition Modeling (FDM), is a process where material is placed in specific locations layer-by-layer to create a complete part. Printers designed for FFF build parts by extruding a thermoplastic filament from a nozzle in a predetermined path. Originally developed for commercial printers, 3D printing via FFF has become accessible to a much larger community of users since the introduction of Reprap printers. These low-cost, desktop machines are typically used to print prototype parts or novelty items. As the adoption of desktop sized 3D printers broadens, there is increased demand for these machines to produce functional parts that can withstand harsher conditions such as high temperature and mechanical loads. Materials meeting these requirements tend to possess better mechanical properties and higher glass transition temperatures (Tg), thus requiring printers with high temperature printing capability. This report outlines the problems and solutions, and includes a detailed description of the machine design, printing parameters, and processes specific to high temperature thermoplastic 3D printing.

  13. CrossCheck: an open-source web tool for high-throughput screen data analysis.

    Science.gov (United States)

    Najafov, Jamil; Najafov, Ayaz

    2017-07-19

    Modern high-throughput screening methods allow researchers to generate large datasets that potentially contain important biological information. However, oftentimes, picking relevant hits from such screens and generating testable hypotheses requires training in bioinformatics and the skills to efficiently perform database mining. There are currently no tools available to general public that allow users to cross-reference their screen datasets with published screen datasets. To this end, we developed CrossCheck, an online platform for high-throughput screen data analysis. CrossCheck is a centralized database that allows effortless comparison of the user-entered list of gene symbols with 16,231 published datasets. These datasets include published data from genome-wide RNAi and CRISPR screens, interactome proteomics and phosphoproteomics screens, cancer mutation databases, low-throughput studies of major cell signaling mediators, such as kinases, E3 ubiquitin ligases and phosphatases, and gene ontological information. Moreover, CrossCheck includes a novel database of predicted protein kinase substrates, which was developed using proteome-wide consensus motif searches. CrossCheck dramatically simplifies high-throughput screen data analysis and enables researchers to dig deep into the published literature and streamline data-driven hypothesis generation. CrossCheck is freely accessible as a web-based application at http://proteinguru.com/crosscheck.

  14. Special performance measurements of a {open_quotes}high-tube-density{close_quotes} condenser

    Energy Technology Data Exchange (ETDEWEB)

    Smoglie, C.; Novak, W.; Kreidler, T.; Arnal, M. [ABB Power Generation, Ltd., Baden (Switzerland)] [and others

    1996-08-01

    Performance measurements of a High-Tube-Density (HTD) Condenser have been made and evaluated. The condenser is an example of the ABB modular tube-bundle design and is derived from the established, high-performance ABB CM Condenser. It is a two-pass condenser designed for situations where space limitations make it necessary to have horizontally divided waterboxes. It is further characterized by its compactness which is a result in part, of the high tubesheet drill-out coefficient. As a part of continuing development work it was of particular interest to determine the performance characteristics of the condenser while in normal operation. Tests at seven different electrical loads were carried out for a load range of 65% to 98%. The experimental data show very good agreement with design values. Measured values of the cooling water pressure loss and overall heat transfer coefficient were superior to design values. Very satisfactory results for condensate subcooling and O{sub 2} concentration were also obtained. A vacuum drop test demonstrated that the condenser is well sealed and that the venting system capability is sufficient. 6 refs., 9 figs., 11 tabs.

  15. Ice-wedge Pseudomorphs Showing Climatic Change Since the Late Pleistocene in the Source Area of the Yellow River, Northeast Tibet

    Institute of Scientific and Technical Information of China (English)

    CHENG Jie; ZHANG Xujiao; TIAN Mingzhong; YU Wenyang; YU Jiangkuan; TANG Dexiang; YUE Jianwei

    2005-01-01

    The source area of the Yellow River is located in the northeastern Tibetan Plateau, and is a high-elevation region with the annual mean temperature of-3.9℃. The ice-wedge pseudomorphs discovered in this region are recognized as two types.One was found in sandy gravel beds of the second terrace of the Yellow River. This ice-wedge pseudomorph is characterized by higher ratio of breadth/depth, and are 1~1.4 m wide and about 1 m deep. The bottom border of the ice-wedge pseudomorph is round arc in section. Another discovered in the pedestal of the second terrace has lower ratio of width/depth, and is 0.3~1.0 m wide and 1~2 m deep. Its bottom border is sharp. Based on the TL dating, the former was formed at the middle Holocene (5.69±0.43 ka BP and 5.43±0.41 ka BP),that is, the Megathermal, and the latter was formed at the late Last Glacial Maximum (13.49± 1.43 ka BP).Additionally, the thawing-freezing folders discovered in the late Late Pleistocene proluvium are 39.83±3.84 ka BP in age. The study on the ice-wedge pseudomorphs showed that the air temperature was lowered by up to 6~7 ℃ in the source area of the Yellow River when the ice-wedge pseudomorphs and thawing-freezing folds developed.

  16. A High-Throughput, Field-Based Phenotyping Technology for Tall Biomass Crops1[OPEN

    Science.gov (United States)

    2017-01-01

    Recent advances in omics technologies have not been accompanied by equally efficient, cost-effective, and accurate phenotyping methods required to dissect the genetic architecture of complex traits. Even though high-throughput phenotyping platforms have been developed for controlled environments, field-based aerial and ground technologies have only been designed and deployed for short-stature crops. Therefore, we developed and tested Phenobot 1.0, an auto-steered and self-propelled field-based high-throughput phenotyping platform for tall dense canopy crops, such as sorghum (Sorghum bicolor). Phenobot 1.0 was equipped with laterally positioned and vertically stacked stereo RGB cameras. Images collected from 307 diverse sorghum lines were reconstructed in 3D for feature extraction. User interfaces were developed, and multiple algorithms were evaluated for their accuracy in estimating plant height and stem diameter. Tested feature extraction methods included the following: (1) User-interactive Individual Plant Height Extraction (UsIn-PHe) based on dense stereo three-dimensional reconstruction; (2) Automatic Hedge-based Plant Height Extraction (Auto-PHe) based on dense stereo 3D reconstruction; (3) User-interactive Dense Stereo Matching Stem Diameter Extraction; and (4) User-interactive Image Patch Stereo Matching Stem Diameter Extraction (IPaS-Di). Comparative genome-wide association analysis and ground-truth validation demonstrated that both UsIn-PHe and Auto-PHe were accurate methods to estimate plant height, while Auto-PHe had the additional advantage of being a completely automated process. For stem diameter, IPaS-Di generated the most accurate estimates of this biomass-related architectural trait. In summary, our technology was proven robust to obtain ground-based high-throughput plant architecture parameters of sorghum, a tall and densely planted crop species. PMID:28620124

  17. A 5 GHz high-temperature superconducting reaction-type transmitting filter based upon split open-ring resonators

    Energy Technology Data Exchange (ETDEWEB)

    Futatsumori, S; Hikage, T; Nojima, T [Graduate School of Information Science and Technology, Hokkaido University, Kita 14, Nishi 9, Kita-ku, Sapporo, Hokkaido 060-0814 (Japan); Akasegawa, A; Nakanishi, T; Yamanaka, K [Fujitsu Limited, 10-1 Morinosato-Wakamiya, Atsugi, Kanagawa 243-0197 (Japan)], E-mail: futatsumori@emwtinfo.ice.eng.hokudai.ac.jp

    2008-04-01

    A new kind of high-temperature superconducting (HTS) transmitting filter based on a reaction-type resonator is presented. The purpose of an HTS reaction-type filter (HTS-RTF) is to eliminate the intermodulation distortion noise generated by microwave power amplifiers such as those employed in mobile base stations. An HTS-RTF enables both higher power handling capability and sharper cutoff characteristics compared to existing planar-type HTS transmitting filters, since a reaction-type resonator does not resonate with high power fundamental signals. To achieve steep skirt characteristics and high power handling capability simultaneously, a 5 GHz three-pole HTS-RTF using a split open-ring resonator is designed. This split open-ring resonator offers low maximum current densities and a high-unloaded Q factor with low radiation. The designed prototype filter has Chebyshev characteristics with a centre frequency of 4.95 GHz and a bandwidth of 1.5 MHz. The HTS-RTF is fabricated using a double-sided YBa{sub 2}C{sub 3}O{sub 7-{delta}} thin film deposited on a 0.5 mm thick MgO substrate. The measured filter shows an insertion loss of less than 0.1 dB and a third intermodulation distortion value of -56.7 dBc for a 40 dBm passband signal. In addition, adjacent channel leakage power ratio (ACLR) measurements using an actual wideband CDMA signal confirm an ACLR improvement of about 10 dB for a four-carrier signal with power up to 40 dBm.

  18. Deformation processes in orogenic wedges: New methods and application to Northwestern Washington State

    Science.gov (United States)

    Thissen, Christopher J.

    is essentially two-dimensional. We use this constraint to develop a suite of orogenic deformation models that use slab height and erosion rate data as boundary conditions. We use the models to show that influx of sediments distributed along an accretionary front can greatly reduce deformation required to maintain wedge taper. Due to the two-dimensional nature of deformation in the Olympics, a series of two-dimensional transects across the peninsula provides an approximation for non-elastic deformation across the Peninsula. We show how the shallow slab height and deeper exhumation at the core of peninsula led to the domal structure of the Olympics. This model also explains the counter-clockwise vertical axis rotations north of the peninsula, and clockwise rotations south of the peninsula through horizontal shear, similar to opening a gate. Finally, the horizontal surface velocities predicted by the models suggests that up to 15% of GPS velocities may reflect non-elastic, permanent translation of material towards the rear of the wedge.

  19. Metastable olivine wedge beneath northeast China and its applications

    Science.gov (United States)

    Jiang, G.; Zhao, D.; Zhang, G.

    2013-12-01

    When the Pacific slab subducted into the mantle transition zone, there might exist a metastable olivine wedge (MOW) inside the slab due to the phase transition. Lots of researchers have adopted such various methods to detect the characteristics of this MOW as the forward modeling of travel times, shear wave amplitude patterns, teleseismic P wav