WorldWideScience

Sample records for open door laminoplasty

  1. [Three dimensional finite element model of a modified posterior cervical single open-door laminoplasty].

    Science.gov (United States)

    Wang, Q; Yang, Y; Fei, Q; Li, D; Li, J J; Meng, H; Su, N; Fan, Z H; Wang, B Q

    2017-06-06

    Objective: To build a three-dimensional finite element models of a modified posterior cervical single open-door laminoplasty with short-segmental lateral mass screws fusion. Methods: The C(2)-C(7) segmental data were obtained from computed tomography (CT) scans of a male patient with cervical spondylotic myelopathy and spinal stenosis.Three-dimensional finite element models of a modified cervical single open-door laminoplasty (before and after surgery) were constructed by the combination of software package MIMICS, Geomagic and ABAQUS.The models were composed of bony vertebrae, articulating facets, intervertebral disc and associated ligaments.The loads of moments 1.5Nm at different directions (flexion, extension, lateral bending and axial rotation)were applied at preoperative model to calculate intersegmental ranges of motion.The results were compared with the previous studies to verify the validation of the models. Results: Three-dimensional finite element models of the modified cervical single open- door laminoplasty had 102258 elements (preoperative model) and 161 892 elements (postoperative model) respectively, including C(2-7) six bony vertebraes, C(2-3)-C(6-7) five intervertebral disc, main ligaments and lateral mass screws.The intersegmental responses at the preoperative model under the loads of moments 1.5 Nm at different directions were similar to the previous published data. Conclusion: Three-dimensional finite element models of the modified cervical single open- door laminoplasty were successfully established and had a good biological fidelity, which can be used for further study.

  2. Quality of life in symptomatic cervical myelopathy after open-door laminoplasty

    Directory of Open Access Journals (Sweden)

    Rodrigo Yuiti Nakao

    2015-06-01

    Full Text Available OBJECTIVE: To analyze the results obtained by open-door laminoplasty using the Newbridge(r/Blackstone plate, in cases of myelopathy associated with cervical lordosis.METHODS: From December 2010 to October 2012, eight patients between the ages of 49 and 68 underwent open-door laminoplasty with the use of the Newbridge(r fixation system for maintenance and stabilization of the cervical laminoplasty. Minimum follow-up was four months. For the evaluation of quality of life the questionnaire SF-36 was applied at the following times: preoperative, one month and three months after surgery associated with the subjective assessment of the patient regarding satisfaction with the procedure and with the Nurick neurological scale applied prior to surgery and three months later.RESULTS: According to the SF-36, there was significant improvement in the domains functional ability, general health perceptions and emotional aspects over time; regarding physical limitations and social aspects there was no improvement in the first postoperative month, only in the third month. There were no statistically significant changes observed during the period covered by this study related to pain, vitality and mental health. According to Nurick scale, there was evidence of improvement in symptoms of cervical myelopathy. Based on the subjective evaluation of the patients, surprisingly, all patients were satisfied with the surgical procedure and the results.CONCLUSION: The open-door laminoplasty technique with rigid fixation to maintain the opening is useful in improving the symptoms of cervical myelopathy associated with lordosis, leading to improved quality of life and with a high degree of patient satisfaction and fewer complications.

  3. The Midterm Surgical Outcome of Modified Expansive Open-Door Laminoplasty

    Directory of Open Access Journals (Sweden)

    Kuang-Ting Yeh

    2016-01-01

    Full Text Available Laminoplasty is a standard technique for treating patients with multilevel cervical spondylotic myelopathy. Modified expansive open-door laminoplasty (MEOLP preserves the unilateral paraspinal musculature and nuchal ligament and prevents facet joint violation. The purpose of this study was to elucidate the midterm surgical outcomes of this less invasive technique. We retrospectively recruited 65 consecutive patients who underwent MEOLP at our institution in 2011 with at least 4 years of follow-up. Clinical conditions were evaluated by examining neck disability index, Japanese Orthopaedic Association (JOA, Nurick scale, and axial neck pain visual analog scale scores. Sagittal alignment of the cervical spine was assessed using serial lateral static and dynamic radiographs. Clinical and radiographic outcomes revealed significant recovery at the first postoperative year and still exhibited gradual improvement 1–4 years after surgery. The mean JOA recovery rate was 82.3% and 85% range of motion was observed at the final follow-up. None of the patients experienced aggravated or severe neck pain 1 year after surgery or showed complications of temporary C5 nerve palsy and lamina reclosure by the final follow-up. As a less invasive method for reducing surgical dissection by using various modifications, MEOLP yielded satisfactory midterm outcomes.

  4. Image analysis of open-door laminoplasty for cervical spondylotic myelopathy: comparing the influence of cord morphology and spine alignment.

    Science.gov (United States)

    Lin, Bon-Jour; Lin, Meng-Chi; Lin, Chin; Lee, Meei-Shyuan; Feng, Shao-Wei; Ju, Da-Tong; Ma, Hsin-I; Liu, Ming-Ying; Hueng, Dueng-Yuan

    2015-10-01

    Previous studies have identified the factors affecting the surgical outcome of cervical spondylotic myelopathy (CSM) following laminoplasty. Nonetheless, the effect of these factors remains controversial. It is unknown about the association between pre-operative cervical spinal cord morphology and post-operative imaging result following laminoplasty. The goal of this study is to analyze the impact of pre-operative cervical spinal cord morphology on post-operative imaging in patients with CSM. Twenty-six patients with CSM undergoing open-door laminoplasty were classified according to pre-operative cervical spine bony alignment and cervical spinal cord morphology, and the results were evaluated in terms of post-operative spinal cord posterior drift, and post-operative expansion of the antero-posterior dura diameter. By the result of study, pre-operative spinal cord morphology was an effective classification in predicting surgical outcome - patients with anterior convexity type, description of cervical spinal cord morphology, had more spinal cord posterior migration than those with neutral or posterior convexity type after open-door laminoplasty. Otherwise, the interesting finding was that cervical spine Cobb's angle had an impact on post-operative spinal cord posterior drift in patients with neutral or posterior convexity type spinal cord morphology - the degree of kyphosis was inversely proportional to the distance of post-operative spinal cord posterior drift, but not in the anterior convexity type. These findings supported that pre-operative cervical spinal cord morphology may be used as screening for patients undergoing laminoplasty. Patients having neutral or posterior convexity type spinal cord morphology accompanied with kyphotic deformity were not suitable candidates for laminoplasty. Copyright © 2015 Elsevier B.V. All rights reserved.

  5. Surgical results of open-door laminoplasty for cervical cord injury without fracture or dislocation

    International Nuclear Information System (INIS)

    Hamada, Kenichiro; Oda, Takenori; Kobashi, Masumi; Yamamura, Mitsuyoshi; Tsukamoto, Yasunori; Suzuki, Shozo; Fujita, Satoru; Mori, Shigeki; Fujiwara, Keiju

    2003-01-01

    The purpose of this study is to evaluate the efficacy of spinal cord decompression surgery for cervical spinal cord injury without fracture or dislocation of the spinal column. Twenty-nine patients treated by expansive open-door laminoplasty are the subjects to this study. Severity of neurological deficit was assessed by the Japanese Orthopaedic Association (JOA) scoring system. Therapeutic outcome was evaluated by the recovery rate of JOA score. Seventeen patients were treated by surgically during the acute phase (within three months after injury), and the remaining 12 were in chronic phase (after 3 months). The recovery rate showed no significant difference between the two groups (46.9% vs. 34.0%). In 16 patients, the lesion responsible for spinal cord damage was recognized as a change of the intramedullary signal intensity on MRI, which was most frequently located at C3/4 level. In 7 out of the 16 patients, the most stenotic level agreed with recognized cord injury on MRI, and in the remaining 9 patients, it did not. The recovery rate showed no significant difference between the two groups (57.3% vs. 31.1%). Even if the neurological dysfunction has been present more than 3 months and spontaneous improvement reaches plateau, or spinal cord injury level recognized as a signal intensity change on MRI is not stenotic, there is still some possibility for improving the neurological function through surgery. (author)

  6. Modified expansive open-door laminoplasty technique improved postoperative neck pain and cervical range of motion.

    Science.gov (United States)

    Yeh, Kuang-Ting; Chen, Ing-Ho; Yu, Tzai-Chiu; Liu, Kuan-Lin; Peng, Cheng-Huan; Wang, Jen-Hung; Lee, Ru-Ping; Wu, Wen-Tien

    2015-12-01

    Expansive open-door laminoplasty (EOLP) is a useful technique for multiple-level cervical spondylotic myelopathy. The common postoperative complications of EOLP include moderate to severe neck pain, loss of cervical lordosis, decrease of cervical range of motion, and C5 palsy. We modified the surgical technique to lessen these complications. This study is aimed to elucidate the efficacy of modified techniques to lessen the complications of traditional procedures. We collected data from 126 consecutive patients treated at our institution between August 2008 and December 2012. Of these, 66 patients underwent conventional EOLP (CEOLP) and the other 60 patients underwent modified EOLP (MEOLP). The demographic and preoperative data, axial pain visual analog scale scores at 2 weeks and 3 months postoperatively, clinical outcomes evaluated using Nurick score and Japanese Orthopedic Association recovery rate at 12 months postoperatively, and radiographic results assessed using plain films at 3 months and 12 months postoperatively for both groups were compared and analyzed. There were no significant differences regarding the preoperative condition between the CEOLP and MEOLP groups (p > 0.05). The Japanese Orthopedic Association recovery rate of the MEOLP group was 70.3%, comparable to the result of the other group (70.2%). Postoperative axial neck pain, loss of range of motion, and loss of lordosis of cervical curvature decreased significantly in the MEOLP group (p cervical spondylotic myelopathy, which decreases postoperative complications effectively. Copyright © 2014. Published by Elsevier B.V.

  7. Acute traumatic central cord syndrome--experience using surgical decompression with open-door expansile cervical laminoplasty.

    Science.gov (United States)

    Uribe, Juan; Green, Barth A; Vanni, Steven; Moza, Kapil; Guest, James D; Levi, Allan D

    2005-06-01

    Open-door expansile cervical laminoplasty (ODECL) is an effective surgical technique in the treatment of multilevel cervical spondylotic myelopathy. In the present study, we reviewed the safety and short-term neurological outcome after expansile cervical laminoplasty in the treatment of acute central cord syndrome. We retrospectively reviewed our database over a 3-year period (January 1997-January 2001) and identified 69 surgically treated cervical spinal cord injuries, including 29 cases of acute traumatic central cord syndrome (ATCCS). Fifteen of these patients underwent expansile cervical laminoplasty, whereas 14 did not because of radiographic evidence of sagittal instability. We collected data on the preoperative and the immediate postoperative and 3-month neurological examinations. Neurological function was assessed using the Asia Spinal Injury Association (ASIA) grading system. We also reviewed the occurrence of complications and short-term radiological stability after the index procedure. The median age was 56 years. All patients had hyperextension injuries with underlying cervical spondylosis and stenosis in the absence of overt fracture or instability. The average delay from injury to surgery was 3 days. The preoperative ASIA grade scale was grade C, 8 patients, and grade D, 7 patients. There were no cases of immediate postoperative deterioration or at 3 months follow-up. Neurological outcome: 71.4% (10/14) of patients improved 1 ASIA grade when examined 3 months post injury. Surgical intervention consisting of ODECL can be safely applied in the subset of patients with ATCCS without instability who have significant cervical spondylosis/stenosis. Open-door expansile cervical laminoplasty is a safe, low-morbidity, decompressive procedure, and in our patients did not produce neurological deterioration.

  8. A Comparison of Implants Used in Open-Door Laminoplasty: Structural Rib Allografts Versus Metallic Miniplates.

    Science.gov (United States)

    Tabaraee, Ehsan; Mummaneni, Praveen; Abdul-Jabbar, Amir; Shearer, David; Roy, Esha; Amin, Beejal; Ames, Christopher; Burch, Shane; Deviren, Vedat; Berven, Sigurd; Hu, Serena; Chou, Dean; Tay, Bobby K

    2017-06-01

    A retrospective case-controlled study. Open-door laminoplasty has been successfully used to address cervical spondylotic myelopathy and ossification of the posterior longitudinal ligament. Two common implants include rib allograft struts and metallic miniplates. The goals of this study were to compare outcomes, complications, and costs associated with these 2 implants. A retrospective review was done on 51 patients with allograft struts and 55 patients with miniplates. Primary outcomes were neck visual analog scale (VAS) pain scores and Nurick scores. Secondary outcomes included length of the procedure, estimated blood loss, rates of complications, and the direct costs associated with the surgery and inpatient hospitalization. There were no differences in demographic characteristics, diagnoses, comorbidities, and preoperative outcome scores between the 2 treatment groups. Mean follow-up was 27 months. The postoperative neck VAS scores and Nurick scores improved significantly from baseline to final follow-up for both groups, but there was no difference between the 2 groups. The average length of operation (161 vs. 136 min) and number of foraminotomies (2.7 vs. 1.3) were higher for the allograft group (P=0.007 and 0.0001, respectively). Among the miniplate group, there was no difference in complications but a trend for less neck pain for patients treated without hard collar at final follow-up (1.8 vs. 2.3, P=0.52). The mean direct costs of hospitalization for the miniplate group were 15% higher. Structural rib allograft struts and metallic miniplates result in similar improvements in pain and functional outcome scores with no difference in the rate of complications in short-term follow-up. Potential benefits of using a plate include shorter procedure length and less need for postoperative immobilization. When costs of bracing and operative time are included, the difference in cost between miniplates and allograft struts is negligible.

  9. Comparable clinical and radiological outcomes between skipped-level and all-level plating for open-door laminoplasty.

    Science.gov (United States)

    Cheung, Jason Pui Yin; Cheung, Prudence Wing Hang; Cheung, Amy Yim Ling; Lui, Darren; Cheung, Kenneth M C

    2018-06-01

    To compare the clinical and radiological outcomes between skipped-level and all-level plating for cervical laminoplasty. Patients with cervical spondylotic myelopathy (CSM) treated by open-door laminoplasty with minimum 2-year postoperative follow-up were included. All patients had opening from C3-6 or C3-7 and were divided into skipped-level or all-level plating groups. Japanese Orthopaedic Association (JOA) scores and canal measurements were obtained preoperatively, immediate (within 1 week) postoperatively, and at 2, 6 weeks, 3, 6 and 12 months postoperatively. Paired t test was used for comparative analysis. Receiver operating characteristic analysis was used to determine the canal expansion cutoff for spring-back closure. A total of 74 subjects were included with mean age of 66.1 ± 11.3 years at surgery. Of these, 32 underwent skipped-level plating and 42 underwent all-level plating. No significant differences were noted between the two groups at baseline and follow-up. Spring-back closure was observed in up to 50% of the non-plated levels within 3 months postoperatively. The cutoff for developing spring-back closure was 7 mm canal expansion for C3-6. No differences were observed in JOA scores and recovery rates between the two groups. None of the patients with spring-back required reoperation. There were no significant differences between skipped-level and all-level plating in terms of JOA or recovery rate, and canal diameter differences. This has tremendous impact on saving costs in CSM management as up to two plates per patient undergoing a standard C3-6 laminoplasty may be omitted instead of four plates to every level to achieve similar clinical and radiological outcomes. III. These slides can be retrieved under Electronic Supplementary Material.

  10. A prospective randomized trial comparing anterior cervical discectomy and fusion versus plate-only open-door laminoplasty for the treatment of spinal stenosis in degenerative diseases.

    Science.gov (United States)

    Jiang, Yun-Qi; Li, Xi-Lei; Zhou, Xiao-Gang; Bian, Chong; Wang, Han-Ming; Huang, Jian-Ming; Dong, Jian

    2017-04-01

    For three or more involved cervical levels, there is a debate over which approach yields the best outcomes for the treatment of multilevel cervical degenerative disease. Our objective is to compare the radiological and clinical outcomes of two treatments for multilevel cervical degenerative disease: anterior cervical discectomy and fusion (ACDF) versus plate-only open-door laminoplasty (laminoplasty). Patients were randomized on a 1:1 randomization schedule with 17 patients in the ACDF group and 17 patients in the laminoplasty group. Clinical outcomes were assessed by a visual analog scale (VAS), Japanese Orthopedic Association (JOA) scores, operative time, blood loss, rates of complications, drainage volume, discharge days after surgery, and complications. The cervical spine curvature index (CI) and range of motion (ROM) were assessed with radiographs. The mean VAS score, the mean JOA score, and the rate of complications did not differ significantly between groups. The laminoplasty group had greater blood loss, a longer operative time, more drainage volume, and a longer hospital stay than the ACDF group. There were no significant differences in the CI and ROM between the two groups at baseline and at each follow-up time point. ROM in both groups decreased significantly after surgery. Both ACDF and laminoplasty are effective and safe treatments for multilevel cervical degenerative disease. ACDF causes fewer traumas than laminoplasty.

  11. Long-term outcomes and prognostic analysis of modified open-door laminoplasty with lateral mass screw fusion in treatment of cervical spondylotic myelopathy

    Directory of Open Access Journals (Sweden)

    Su N

    2016-08-01

    Full Text Available Nan Su, Qi Fei, Bingqiang Wang, Dong Li, Jinjun Li, Hai Meng, Yong Yang, Ai Guo Department of Orthopedics, Beijing Friendship Hospital, Capital Medical University, Xicheng District, Beijing, People’s Republic of China Objectives: The purpose of the present study was to explore and analyze the long-term outcomes and factors that affect the prognosis of expansive open-door laminoplasty with lateral mass screw fusion in treatment of cervical spondylotic myelopathy (CSM. Methods: We retrospectively reviewed 49 patients with multilevel CSM who had undergone expansive open-door laminoplasty with lateral mass screws fixation and fusion in our hospital between February 2008 and February 2012. The average follow-up period was 4.6 years. The clinical data of patients, including age, sex, operation records, pre- and postoperation Japanese Orthopedic Association (JOA scores, cervical spine canal stenosis, and cervical curvature, were collected. Increased signal intensity (ISI on T2-weighted magnetic resonance imaging and ossification of the posterior longitudinal ligament were also observed. Paired t-test was used to analyze the treatment effectiveness and recovery of neuronal function. The prognostic factors were analyzed with multivariable linear regression model. Results: Forty-nine patients with CSM with a mean age of 59.44 years were enrolled in this study. The average of preoperative JOA score was 9.14±2.25, and postoperative JOA score was 15.31±1.73. There was significant difference between the pre- and postoperative JOA scores. The clinical improvement rate was 80.27%. On follow-up, five patients had complaints of neck and shoulder pain, but no evidence of C5 nerve palsy was found. Developmental cervical spine canal stenosis was present in all patients before surgery. Before surgery, ISI was observed in eight patients, while ossification of the posterior longitudinal ligament was found in 12 patients. The average of preoperative cervical

  12. A unilateral open door laminoplasty technique: prospective analysis of the relationship between midline extensor muscle preservation and postoperative neck pain.

    Science.gov (United States)

    Park, Jin Hoon; Jeong, Eui-Kyun; Lee, Moon Kyu; Chul Rhim, Seung; Roh, Sung Woo; Kim, Jeoung Hee; Jeon, Sang Ryong

    2015-02-01

    Since laminoplasty was first introduced, several techniques have been developed to reduce postoperative neck pain and progressive kyphosis following this procedure. We describe the importance of deep muscle preservation to prevent postoperative neck pain following cervical posterior surgery, using the inter-muscular plane. We performed cervical laminoplasty on 10 patients from March to July 2012. The mean follow-up duration was 14.6 (range 12-18) months, and the mean age was 58.8 (48-68) years. There were eight men and two women in the study cohort, which consisted of eight cases of cervical spondylotic myelopathy and two cases of ossification of the posterior longitudinal ligament. The Japanese Orthopaedic Association (JOA) score and neck disability index (NDI) score were assessed before and at 6 and 12 months after surgery. The numeric rating scale (NRS) for neck pain was evaluated at 1, 3, 6, and 12 months after surgery. CT scan was performed immediately after the operation, and a radiograph was performed preoperatively and during the follow-up evaluation at 1, 3, 6, and 12 months after surgery. The preoperative JOA and NDI scores improved in all patients. Although there were two patients who complained of moderate postoperative neck pain (NRS 4 and 5), their condition gradually improved. Seven patients had mild or no neck pain (below NRS 3) at the 12 month follow-up. In addition, the cervical alignment was well maintained in all but one patient. Although larger prospective cohorts, longer follow-up periods, and comparative analyses are still needed, the clinical and radiological outcomes observed in the short 12 month period in this small cohort are promising. Copyright © 2014 Elsevier Ltd. All rights reserved.

  13. Expansive open-door laminoplasty versus laminectomy and instrumented fusion for cases with cervical ossification of the posterior longitudinal ligament and straight lordosis.

    Science.gov (United States)

    Liu, Xiaowei; Chen, Yu; Yang, Haisong; Li, Tiefeng; Xu, Bin; Chen, Deyu

    2017-04-01

    To identify whether expansive open-door laminoplasty (Lam) is more appropriate than laminectomy and instrumented fusion (LIF) for cases with ossification of the posterior longitudinal ligament (OPLL) and straight cervical lordosis. A total of 67 cases were included and divided into Group Lam (n = 32) and Group LIF (n = 35), and the mean follow-up periods were 38 and 42 months, respectively. The cervical lordosis was elevated by C2-7 Cobb angle and cervical sagittal balance by C2-C7 sagittal vertical axis (SVA). Japanese Orthopedic Association (JOA), neurological recovery rate (RR) being calculated by the JOA, visual analog scale (VAS) and neck disability index (NDI) were used to assess clinical outcomes. Differences in general data between two groups were not significant. Total blood loss and operation duration in Group Lam were both significantly less than that in the Group LIF. By the final follow-up, the cervical lordosis significantly decreased in Group Lam and increased in Group LIF, the SVA significantly increased in Group Lam and kept unchanged in Group LIF, and the JOA, VAS, NDI significantly improved in both groups. Although there was no significant difference in RR between the two groups, cases in Group Lam had significantly larger incidence of postoperative kyphosis and kyphotic change rate, and less VAS, NDI and incidence of axial pain than cases in Group LIF. When compared with the LIF, the Lam is recommended for cases with OPLL and straight cervical lordosis when taking comparable neurological recovery, less axial pain and better neck function improvement into consideration.

  14. Science Opens Doors

    Science.gov (United States)

    Smyth, Steve; Smyth, Jen

    2016-01-01

    Science Opens Doors is the creation of Clive Thompson of the Horners' Livery Company. The Science Opens Doors project philosophy is strongly based upon the King's College London ASPIRES project, which established that children like doing science in junior school (ages 7-11), but that by the age of 12-14 they are firmly against becoming scientists.…

  15. Comparative Effectiveness of Different Types of Cervical Laminoplasty

    OpenAIRE

    Heller, John G.; Raich, Annie L.; Dettori, Joseph R.; Riew, K. Daniel

    2013-01-01

    Study Design Systematic review. Study Rationale Numerous cervical laminoplasty techniques have been described but there are few studies that have compared these to determine the superiority of one over another. Clinical Questions The clinical questions include key question (KQ)1: In adults with cervical myelopathy from ossification of the posterior longitudinal ligament (OPLL) or spondylosis, what is the comparative effectiveness of open door cervical laminoplasty versus French door cervical ...

  16. Comparative effectiveness of different types of cervical laminoplasty.

    Science.gov (United States)

    Heller, John G; Raich, Annie L; Dettori, Joseph R; Riew, K Daniel

    2013-10-01

    Study Design Systematic review. Study Rationale Numerous cervical laminoplasty techniques have been described but there are few studies that have compared these to determine the superiority of one over another. Clinical Questions The clinical questions include key question (KQ)1: In adults with cervical myelopathy from ossification of the posterior longitudinal ligament (OPLL) or spondylosis, what is the comparative effectiveness of open door cervical laminoplasty versus French door cervical laminoplasty? KQ2: In adults with cervical myelopathy from OPLL or spondylosis, are postoperative complications, including pain and infection, different for the use of miniplates versus the use of no plates following laminoplasty? KQ3: Do these results vary based on early active postoperative cervical motion? Materials and Methods A systematic review of the English-language literature was undertaken for articles published between 1970 and March 11, 2013. Electronic databases and reference lists of key articles were searched to identify studies evaluating (1) open door cervical laminoplasty and French door cervical laminoplasty and (2) the use of miniplates or no plates in cervical laminoplasty for the treatment of cervical spondylotic myelopathy or OPLL in adults. Studies involving traumatic onset, cervical fracture, infection, deformity, or neoplasms were excluded, as were noncomparative studies. Two independent reviewers (A.L.R., J.R.D.) assessed the level of evidence quality using the Grades of Recommendations Assessment, Development and Evaluation system, and disagreements were resolved by consensus. Results We identified three studies (one of class of evidence [CoE] II and two of CoE III) meeting our inclusion criteria comparing open door cervical laminoplasty with French door laminoplasty and two studies (one CoE II and one CoE III) comparing the use of miniplates with no plates. Data from one randomized controlled trial (RCT) and two retrospective cohort

  17. China opens the door

    Energy Technology Data Exchange (ETDEWEB)

    Starke, K.

    1997-01-01

    The door to China`s vast market for power generation was opened a bit further for foreign firms in November. That is when power ministry head Shi Dazhen said the country would rely on overseas investors for 20 percent of the funding needed to boost output--double the amount foreigners were previously allowed to contribute. Through 1995, foreigners invested $12.2 billion in China`s electricity industry, accounting for 10 percent of total investment. According to Shi, foreign investors will be asked to provide about $17 billion of the $84 billion China plans to invest in the sector over the next five years. Under China`s Ninth Five-Year Plan (1996-2000), the government aims to boost the country`s power generation capacity at the rate of 15,000 MW to 20,000 MW annually by the year 2000. Since China`s public external debt balance already exceeds $80 billion, however, the government would seem to have little choice but to allow foreigners a greater role. Shi also said that foreigners would be allowed 100 percent ownership of PRC power projects. This is discouraged under China`s current industry guidelines. It is, however, expected to be permitted under China`s first build-operate-transfer (BOT) law, which was anticipated by the end of 1996, says Susan Urkevich, director of project finance at HSBC Investment Bank Asia in Hong Kong. Indeed, China`s first BOT is already happening.

  18. Opening Doors, Hearts and Minds

    Science.gov (United States)

    Foster, Andrea

    2007-01-01

    A panel discussion, "Opening Doors, Hearts and Minds," was hosted at the 2006 annual COEO conference. Four dedicated Torontonians shared how they interpret outdoor environmental education and environmental education in what they do and offered suggestions as to how their work might be integrated in diverse urban communities. Tafari…

  19. Where should a laminoplasty start? The effect of the proximal level on post-laminoplasty loss of lordosis.

    Science.gov (United States)

    Michael, Keith W; Neustein, Thomas M; Rhee, John M

    2016-06-01

    Open-door laminoplasty is a useful operation in the surgical management of cervical myelopathy with favorable outcomes and relatively low complications. One potential undesirable outcome is a decrease in cervical lordosis postoperatively. It is unknown whether the most proximal level undergoing laminoplasty affects the magnitude of loss of lordosis. This study aimed to compare the loss of cervical lordosis postoperatively in patients for whom the most proximal level undergoing laminoplasty is C3 versus C4. A retrospective radiographic review at an academic center was carried out. A total of 65 patients at a single institution who underwent plated open door laminoplasty for cervical myelopathy by multiple surgeons over a 5-year period were included. The primary outcome was change in cervical lordosis, which was the difference in C2-T1 Cobb angle between the postoperative and preoperative films. Patients were divided into two groups based on the most proximal vertebral level undergoing laminoplasty. There were 49 patients who underwent laminoplasty beginning at C3, whereas 16 patients underwent laminoplasty beginning at C4. The C2-T1 Cobb angle was measured on the preoperative film and on the final postoperative follow-up film. The difference between these values was calculated for each patient, and the mean of the differences for the C3 group was compared with that of the C4 group. When C3 was the proximal plated laminoplasty level, loss of lordosis averaged 9°. In contrast, when C4 was the proximal plated level, loss of lordosis was significantly less and averaged only 3° (p=.047). In the group as a whole, mean preoperative lordosis was 18° compared with 11° postoperatively, for an overall 7° loss of lordosis. Starting the laminoplasty at C4 led to significantly less loss of lordosis than starting at C3. When the pattern of spinal cord compression does not require laminoplasty at C3, consideration should be given to making C4 the most cephalad laminoplasty

  20. September 2013: the doors open

    CERN Document Server

    Antonella Del Rosso

    2013-01-01

    Three special days and one public open day: at the end of September our Laboratory will open its doors to visitors from CERN, the local region and all over the world. With over 150,000 visitors expected in total, the organisation of the OpenDays is a challenge that a core team of eleven people have taken up with enthusiasm.   They come from several departments but share one goal: making the last four days of September an unforgettable experience for all the visitors who will come to discover the Laboratory and its scientists. The core team in charge of the organisation of the events is co-ordinated by Hermann Schmickler. “The events are an opportunity for us to celebrate  the discoveries, the excellent performance of the technical installations and the vital contribution of all the CERN personnel, the thousands of users and those working under support contracts,” says Hermann Schmickler. The four-day programme will start on Friday 27 September with an “...

  1. Opening the door to innovation.

    Science.gov (United States)

    Schuurman, Janine; Graus, Yvo F; Labrijn, Aran F; Ruuls, Sigrid; Parren, Paul W H I

    2014-01-01

    Open innovation is the new buzz, with initiatives popping up left and right. Here, we give a personal perspective on a very successful, knowledge-driven innovation initiated in an academia- industry alliance, which culminated in technology platforms that enable the generation of therapeutic antibodies with novel properties. To start, we provide a general background on open innovation in the drug development field.

  2. MINIMALLY INVASIVE SINGLE-DOOR PLATE LAMINOPLASTY WITH LATERAL MASS SCREW FIXATION FOR THE UNSTABLE SEGMENT. REPORT OF TWO CASES WITH LONG FOLLOW-UP

    Directory of Open Access Journals (Sweden)

    SERGIO SORIANO-SOLÍS

    Full Text Available ABSTRACT Objective: To report two cases of multilevel cervical spondylotic myelopathy with monosegmental instability, in which we performed a minimally invasive microsurgical transmuscular approach with tubular retractors to create a single-door plate laminoplasty combined with fixation of the unstable segment with lateral mass screws. Methods: The surgical procedures were performed by the senior author. In both patients, the follow-up was performed using the Oswestry Disability Index (ODI, the Visual Analogue Scale for neck and radicular pain (radVAS, neckVAS, the Neck Disability Index (NDI and the Short Form 36 (SF-36, in the preoperative (preop and postoperative (postop periods, and at 1, 3, 6, 12, 18 and 24 months. A radiological evaluation also was performed, which included AP, lateral and flexion-extension films at 6, 12 and 24 months and CT-scan at 12 months. Results: Case 1 - preop ODI: 40%, 24 months postop ODI: 4%; preop radVAS: 7, 24 months radVAS: 0; preop neckVAS: 8, postop 24 months neckVAS: 0; preopNDI: 43%, 24 months PostopNDI: 8%; SF-36 - preop Physical Functioning (PF: 40, preop Vitality (VT: 40, preop Emotional role functioning (RE: 33.3, Bodily pain (BP: 51, General Health (GH: 57, Social Functioning (SF: 75; postop PF: 95, VT: 95, RE: 100, BP: 74, GH: 87, SF: 100. Case 2 - preopODI: 46%, 24 months postopODI: 10%; preop radVAS: 7, 24m radVAS: 0; preop neckVAS: 9, postop 24 months neckVAS: 0; preopNDI: 56%, 24 months PostopNDI: 15%; SF-36 - preop PF: 39, VT: 45, RE: 33.3, BP: 50, GH: 49, SF: 70; postop PF: 90, VT: 100, RE: 100, BP: 82, GH: 87, SF: 100. No complications, cervical instability or signs of failed surgery were found trough and at final follow-up at 24 months. We found significant clinical improvement in both patients. Conclusions: Minimally invasive cervical laminoplasty combined with lateral mass screw fixation for the unstable segment is a useful technique in cases with multilevel cervical spondylotic myelopathy

  3. Opening the doors: building brand awareness.

    Science.gov (United States)

    John, Judith; McCartney, Rob

    2006-01-01

    In search of a credible and cost-effective way to promote Mount Sinai Hospital (Mount Sinai) and educate a broad public, Mount Sinai opened its doors wide to The Globe and Mail (The Globe). The result was a three-part national feature series that told Mount Sinai's compelling story, provided third-party credibility and confirmed the value of proactive media relations. The series engaged our staff, energized our volunteers and reached both stakeholders and the general public on an emotional level. It also generated the more than dollars 6 million worth of equivalent advertising space it would have required for Mount Sinai to reach this national audience.

  4. Ombuds’ corner: Open door and confidentiality

    CERN Multimedia

    Vincent Vuillemin

    2013-01-01

    For the Open Days, CERN will be transparent for all visitors. It's also the occasion to remember that the Ombuds' door is fully open every day of the year for all persons working for or on behalf of CERN.   The door is open, but as soon as it's closed for a discussion, the office becomes a place where total confidentiality is preserved. This may appear as a contradiction, no? The Ombuds is available to help everyone in all circumstances, but his clause of confidentiality prevents him from acting without the consent of his “visitors”. How can he possibly resolve the in-house conflicts in groups, or units, if all the parties do not voluntarily participate in its resolution? The answer is clear: the job of the Ombuds is to help the parties resolve their conflict by themselves. He will provide a few rules of communication, a process of mutual respect, suggest some possibilities that the parties may want to follow, and mediate the dispute so that people...

  5. Golden Jubilee Photos: Doors wide open

    CERN Document Server

    2004-01-01

    http://www.cern.ch/cern50/ The reception area and visits desk (formerly PIO - Public Information Office) in 1972. Régine Chareyron (on the right), who has worked for the Visits Service for 35 years, is pictured here with Chantal Montuel and Cora Roth. CERN inaugurated its permanent visitor centre "Microcosm" in 1989. This brand new outreach facility added a crowning touch to CERN's tradition of openness in conducting its research activities. In keeping with Article II of the Convention, which stipulates that "the results of its (...) work shall be published or otherwise made available," CERN was already organising visits for the general public in the late 1950s, with members of the personnel doubling up as voluntary tour guides. By 1959, the Laboratory was opening its doors to almost 2 500 visitors a year. Ten years down the line, that number had risen to 12 700, and today CERN welcomes some 30 000 visitors through its doors every year. In addition, the Visits Service has developed teaching packs for sc...

  6. Failure case of a garage door opener

    Directory of Open Access Journals (Sweden)

    Habib, K.

    2005-12-01

    Full Text Available A failure analysis of a garage door opener was conducted for determination of the cause of the failure. The analysis included visual inspections of broken parts as well as electron microscopy examinations of the fracture surface. The visual inspections showed that a bolt connected to the inner trolley of the garage opener assembly was initially fractured. Also, the results of electron microscopy examinations revealed that the broken bolt failed by fatigue damage phenomenon, due to alternating torsional stresses throughout 25 years of an operational life of the garage opener. In addition, a mathematical model corresponding to the failure mechanism was derived along the failure analysis. The model comprises of both design philosophy and fracture mechanics approaches.

    Se analizó el fallo del mecanismo de apertura de una puerta de garaje con el fin de determinar sus causas. El análisis incluyó una inspección visual de las piezas rotas así como un examen mediante microscopía de la superficie de fractura. La inspección visual reveló que primero se fracturó un perno conectado al carro interior del mecanismo de apertura. Los resultados del análisis por microscopía electrónica también mostraron que el perno roto falló debido a fenómenos de daño por fatiga, debido a los esfuerzos torsionales alternos a la largo de 25 años de vida en servicio del mecanismo de apertura. Por otra parte, se construyó un modelo matemático correspondiente al mecanismo de rotura durante el análisis del mismo. Este modelo comprende enfoques, tanto de la filosofía de diseño como de la mecánica de fractura.

  7. [Psychiatry with open doors. Part 1: Rational for an open door for acute psychiatry].

    Science.gov (United States)

    Sollberger, D; Lang, U E

    2014-03-01

    Despite the reform efforts of the last decades modern acute psychiatry still stands between conflicting priorities in everyday practice. The protection of patient autonomy might conflict with a regulatory mandate of psychiatry in societal contexts and the necessity of coercive measures and involuntary treatment might become problematic with respect to presumed but contentious interests of the patient. The conflicts particularly concern questions of involuntary commitment, door closing, coercive and isolation measures. Research on the topic of therapeutic effectiveness of these practices is rare. Accordingly, the practice depends on the federal state, hospital and ward and is very heterogeneous. Epidemiological prognosis predicts an increase of psychiatric disorders; however, simultaneously in terms of medical ethics the warranty of patient autonomy, shared decision-making and informed consent in psychiatry become increasingly more important. This challenges structural and practical changes in psychiatry, particularly in situations of self and third party endangerment which are outlined and a rationale for an opening of the doors in acute psychiatric wards is provided.

  8. Safety and efficacy of cervical laminoplasty using a piezosurgery device compared with a high-speed drill.

    Science.gov (United States)

    Li, Kunpeng; Zhang, Wen; Li, Bin; Xu, Hui; Li, Zhong; Luo, Dawei; Zhang, Jingtao; Ma, Jinzhu

    2016-09-01

    Piezosurgery is a relatively new osteotomy technique using microvibrations of scalpels at ultrasonic frequencies to perform safe and effective osteotomies without damage to adjacent soft tissue, which is widely used in spinal, oral, and maxillofacial surgery. We hypothesized that such a device could also be useful in cervical laminoplasty. The purpose of this study was to compare the safety and efficacy of a piezosurgery device with those of a highspeed drill in cervical laminoplasty. A prospectively randomized clinical study was designed. Forty-two consecutive patients were enrolled in the study. All patients underwent modified expansive open-door laminoplasty and were randomly divided into 2 groups according to the instrument for transection of the lamina, using high-speed drill (drill group) or piezosurgery device (piezosurgery group). The operation time, intraoperative blood loss, and postoperative drainage were recorded. Japanese Orthopedic Association (JOA) score and visual analogue scale (VAS) as clinical assessments were quantified. No significant difference was observed in the operation time between the 2 groups. In the piezosurgery group, there were less loss of the intraoperative blood and postoperative drainage compared with the drill group. However, clinical results (VAS and JOA scores) showed no significant difference between both groups during the all follow-up periods. The piezosurgery is a useful instrument and at least as safe and efficacious as the conventional high-speed drill in cervical laminoplasty.

  9. Globalization: an open door for the knowledge economy

    Directory of Open Access Journals (Sweden)

    Andreea MARIN-PANTELESCU

    2009-12-01

    Full Text Available Globalization refers to an emphasized process of global integration and spreading a set of ideas related to the economical activity and goods’ production, the premises being the liberalization of international commerce and the capital flows, the speeding up of the technological progress and informational society. The cognitive society is more and more obvious and unanimously accepted, which actually proves its efficiency. If traditional, conservative communities, which are not open to change and reject from the start anything new on the horizon, still exist today, they are isolated cases that will eventually be "converted" by this wave of information that has become indispensable to any development because in its absence resources could not be used efficiently. Taking into consideration these elements, this paper wishes to give arguments to the fact that globalization can be seen as being an open door for the cognitive society.

  10. Characterisation of open-door electrical cabinet fires in compartments

    Energy Technology Data Exchange (ETDEWEB)

    Coutin, M., E-mail: mickael.coutin@irsn.fr; Plumecocq, W.; Zavaleta, P.; Audouin, L.

    2015-05-15

    Highlights: • Heat release rate of electrical cabinet fire source in a vitiated atmosphere. • Experimental database for proper validation the combustible modelling, taking into account the oxygen depletion in an enclosure. • New model for complex fire source. - Abstract: The study of electrical fires is a major concern for fire safety in the industry and more particularly for fire safety in nuclear facilities. To investigate this topic, IRSN conducted a large number of real-scale experiments involving open-door electrical cabinets burning firstly under a calorimetric hood and then inside a mechanically-ventilated compartment. The main challenges are to determine accurately the heat release rate of such a complex fire source in a vitiated atmosphere and to provide an experimental database for validating properly the combustible modelling, taking into account the oxygen depletion in an enclosure. After providing a detailed description of the fire scenarios and of the experimental apparatus, this paper focuses on the characteristic stages of the cabinet fire development, essentially based on the heat release rate time evolution of the fire. The effects of the confinement, of the outlet branch location, of the ventilation management and of the fire barrier on the fire source were then investigated. The reproducibility of electrical cabinet fires is also studied. A new model for complex fire source (applied in this study for open-door electrical cabinet fires) was then developed. This model was introduced in the zone code SYLVIA and the major features of the compartment fire experiments, such as characteristic heat release rate with effect of oxygen depletion and over-pressure peak were then calculated with a rather good agreement for this complex fire source (i.e. electrical cabinet)

  11. C3-6 laminoplasty for cervical spondylotic myelopathy maintains satisfactory long-term surgical outcomes.

    Science.gov (United States)

    Sakaura, Hironobu; Hosono, Noboru; Mukai, Yoshihiro; Iwasaki, Motoki; Yoshikawa, Hideki

    2014-08-01

    Study Design Prospective cohort study. Objective To clarify long-term surgical outcomes of C3-6 laminoplasty preserving muscles attached to the C2 and C7 spinous processes in patients with cervical spondylotic myelopathy (CSM). Methods Twenty patients who underwent C3-6 open-door laminoplasty for CSM and who were followed for 8 to 10 years were included in this study. Myelopathic symptoms were assessed using Japanese Orthopaedic Association (JOA) score. Axial neck pain was graded as severe, moderate, or mild. C2-7 angle was measured using lateral radiographs of the cervical spine before surgery and at final follow-up. Results Mean JOA score before surgery (11.7) was significantly improved to 15.2 at the time of maximum recovery (1 year after surgery), declining slightly to 14.9 by the latest follow-up. Late deterioration of JOA score developed in eight patients, but was unrelated to the cervical spine lesions in each case. No patient suffered from prolonged postoperative axial neck pain at final follow-up. The mean C2-7 angle before surgery (13.8 degrees) significantly increased to 19.2 degrees at final follow-up. Conclusions C3-6 laminoplasty preserving muscles attached to the C2 and C7 spinous processes in patients with CSM maintained satisfactory long-term neurologic improvement with significantly reduced frequencies of prolonged postoperative axial neck pain and loss of C2-7 angle after surgery.

  12. C3–6 Laminoplasty for Cervical Spondylotic Myelopathy Maintains Satisfactory Long-Term Surgical Outcomes

    Science.gov (United States)

    Sakaura, Hironobu; Hosono, Noboru; Mukai, Yoshihiro; Iwasaki, Motoki; Yoshikawa, Hideki

    2014-01-01

    Study Design Prospective cohort study. Objective To clarify long-term surgical outcomes of C3–6 laminoplasty preserving muscles attached to the C2 and C7 spinous processes in patients with cervical spondylotic myelopathy (CSM). Methods Twenty patients who underwent C3–6 open-door laminoplasty for CSM and who were followed for 8 to 10 years were included in this study. Myelopathic symptoms were assessed using Japanese Orthopaedic Association (JOA) score. Axial neck pain was graded as severe, moderate, or mild. C2–7 angle was measured using lateral radiographs of the cervical spine before surgery and at final follow-up. Results Mean JOA score before surgery (11.7) was significantly improved to 15.2 at the time of maximum recovery (1 year after surgery), declining slightly to 14.9 by the latest follow-up. Late deterioration of JOA score developed in eight patients, but was unrelated to the cervical spine lesions in each case. No patient suffered from prolonged postoperative axial neck pain at final follow-up. The mean C2–7 angle before surgery (13.8 degrees) significantly increased to 19.2 degrees at final follow-up. Conclusions C3–6 laminoplasty preserving muscles attached to the C2 and C7 spinous processes in patients with CSM maintained satisfactory long-term neurologic improvement with significantly reduced frequencies of prolonged postoperative axial neck pain and loss of C2–7 angle after surgery. PMID:25083358

  13. The CERN Global Network opens its doors to companies

    CERN Multimedia

    Francesco Poppi

    2010-01-01

    Six months after its launch, the CERN Global Network already has almost one thousand members. Today, it is opening its doors to companies from CERN's Member States. This will open up a variety of new professional and career opportunities to all the members and will enhance the networking capabilities of all parties involved.   Screenshot of the CERN Global Network website. A new item has recently appeared on the top menu of the Network's website: “Organisations”. This is the entry point for companies and, later, research institutes, wishing to join. “The CERN Global Network brings together hundreds of people who have worked at or with CERN and who have a wealth of skills and expertise. Thanks to the Network, the job opportunities made available by the companies will become visible to the wider community,” says Linda Orr-Easo, a member of the Knowledge and Technology Transfer Group and the CERN Global Network Manager. In addition to creating new career opp...

  14. Effect of door opening and defrost cycle on a freezer with phase change panels

    International Nuclear Information System (INIS)

    Gin, B.; Farid, M.M.; Bansal, P.K.

    2010-01-01

    An investigation into the effectiveness of phase change material (PCM) panels placed against the internal walls of a freezer to maintain stable temperatures in the presence of heat loads such as door openings, defrosting, and loss of electrical power was carried out. Temperature response was studied during loss of power, a defrost cycle lasting 30 min, and a door opening scheme of 13 door openings over an 11 h period. This PCM system has significantly decreased the rate of temperature increase inside the freezer during defrosting and power loss. Energy consumption was measured during steady operation, a defrost cycle of 30 min, and a scheme of eight door openings at 40 min intervals. It was found that heat loads caused greater energy consumption, and that the presence of PCM during defrosting and door openings resulted in slightly lower energy consumption compared to without PCM.

  15. Novel Door-opening Method for Six-legged Robots Based on Only Force Sensing

    Science.gov (United States)

    Chen, Zhi-Jun; Gao, Feng; Pan, Yang

    2017-09-01

    Current door-opening methods are mainly developed on tracked, wheeled and biped robots by applying multi-DOF manipulators and vision systems. However, door-opening methods for six-legged robots are seldom studied, especially using 0-DOF tools to operate and only force sensing to detect. A novel door-opening method for six-legged robots is developed and implemented to the six-parallel-legged robot. The kinematic model of the six-parallel-legged robot is established and the model of measuring the positional relationship between the robot and the door is proposed. The measurement model is completely based on only force sensing. The real-time trajectory planning method and the control strategy are designed. The trajectory planning method allows the maximum angle between the sagittal axis of the robot body and the normal line of the door plane to be 45º. A 0-DOF tool mounted to the robot body is applied to operate. By integrating with the body, the tool has 6 DOFs and enough workspace to operate. The loose grasp achieved by the tool helps release the inner force in the tool. Experiments are carried out to validate the method. The results show that the method is effective and robust in opening doors wider than 1 m. This paper proposes a novel door-opening method for six-legged robots, which notably uses a 0-DOF tool and only force sensing to detect and open the door.

  16. LS1 Report: As one door closes, another opens

    CERN Multimedia

    Katarina Anthony & Anaïs Schaeffer

    2014-01-01

    Across the PS complex - from Linac 2 to TT2 to the accelerator itself - teams have seen the closing of their retro-1980s entryways, and the opening of state-of-the-art access points in compliance with the highest nuclear safety standards.   One of the new PS access points. The new PS access system provides more than just doors. Designed to protect against the radiation hazards and other risks caused by machine operation, the access system will monitor who goes into each zone, check whether or not the individual has the appropriate permissions to be entering, and even stop the beam if access is attempted during beam mode. "These new points provide automatic means to check that the right people are going in and in safe circumstances," says Pierre Ninin, project leader of the PS complex safety system. "All of these checks were previously done manually, so the burden on operators has been significantly reduced." The 19 new access points were successfully insta...

  17. Is there a difference in range of motion, neck pain, and outcomes in patients with ossification of posterior longitudinal ligament versus those with cervical spondylosis, treated with plated laminoplasty?

    Science.gov (United States)

    Fujimori, Takahito; Le, Hai; Ziewacz, John E; Chou, Dean; Mummaneni, Praveen V

    2013-07-01

    There are little data on the effects of plated, or plate-only, open-door laminoplasty on cervical range of motion (ROM), neck pain, and clinical outcomes. The purpose of this study was to compare ROM after a plated laminoplasty in patients with ossification of posterior longitudinal ligament (OPLL) versus those with cervical spondylotic myelopathy (CSM) and to correlate ROM with postoperative neck pain and neurological outcomes. The authors retrospectively compared patients with a diagnosis of cervical stenosis due to either OPLL or CSM who had been treated with plated laminoplasty in the period from 2007 to 2012 at the University of California, San Francisco. Clinical outcomes were measured using the modified Japanese Orthopaedic Association (mJOA) scale and neck visual analog scale (VAS). Radiographic outcomes included assessment of changes in the C2-7 Cobb angle at flexion and extension, ROM at C2-7, and ROM of proximal and distal segments adjacent to the plated lamina. Sixty patients (40 men and 20 women) with an average age of 63.1 ± 10.9 years were included in the study. Forty-one patients had degenerative CSM and 19 patients had OPLL. The mean follow-up period was 20.9 ± 13.1 months. The mean mJOA score significantly improved in both the CSM and the OPLL groups (12.8 to 14.5, p cervical ROM, especially in the extension angle. Among patients who have undergone laminoplasty, those with OPLL lose more ROM than do those with CSM. No correlation was observed between neck pain and ROM in either group. Neither group had a change in neck pain that reached the MCID following laminoplasty. Both groups improved in neurological function and outcomes.

  18. Experimental Studies of Wheelchair and Walker Users Passing Through Doors with Different Opening Force.

    Science.gov (United States)

    Nersveen, Jonny

    2016-01-01

    Users of walkers and users of different categories of wheelchairs tested doors with different opening force, aiming to reveal the limit that these groups of people could manage on an everyday basis. 94.7% of the wheelchair users reported that a door opening force of 30 N was acceptable, while as 92.1% of this group described 40 N as acceptable. Similarly, 100% of the walker users reported that a door opening force of 30 N was acceptable, while as 87,5% of this group described 40 N as acceptable.

  19. Assessment of operating room airflow using air particle counts and direct observation of door openings.

    Science.gov (United States)

    Teter, Jonathan; Guajardo, Isabella; Al-Rammah, Tamrah; Rosson, Gedge; Perl, Trish M; Manahan, Michele

    2017-05-01

    The role of the operating room (OR) environment has been thought to contribute to surgical site infection rates. The quality of OR air, disruption of airflow, and other factors may increase contamination risks. We measured air particulate counts (APCs) to determine if they increased in relation to traffic, door opening, and other common activities. During 1 week, we recorded APCs in 5-minute intervals and movement of health care workers. Trained observers recorded information about traffic, door openings, job title of the opener, and the reason for opening. At least 1 OR door was open during 47% of all readings. There were 13.4 door openings per hour during cases. Door opening rates ranged from 0.19-0.28 per minute. During this time, a total of 660 air measurements were obtained. The mean APCs were 9,238 particles (95% confidence interval [CI], 5,494- 12,982) at baseline and 14,292 particles (95% CI, 12,382-16,201) during surgery. Overall APCs increased 13% when either door was opened (P opening. We observed numerous instances of verbal communication and equipment movement. Improving efficiency of communication and equipment can aid in reduction of traffic. Further study is needed to examine links between microbiologic sampling, outcome data, and particulate matter to enable study of risk factors and effects of personnel movement. Copyright © 2017 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

  20. Open-ended and Open-door Treatment Groups for Young People with Mental Illness.

    Science.gov (United States)

    Miller, Rachel; Mason, Susan E

    2012-01-01

    The concept of open-ended groups is expanded to include an open-door model (OEOD) wherein members with severe mental illnesses, including schizophrenia disorders and bi-polar, can join, leave, and re-enter groups as their life circumstances dictate their availability and willingness for treatment. This model is grounded on the work of Schopler and Galinsky's (1984/2006) and Galinsky and Schopler's (1989) theses on the value and processes of open-ended groups and includes perspectives on mutual aid and group development. Groupwork with the OEOD format is illustrated with examples taken from a group of 79 participants diagnosed with first-episode schizophrenia/schizoaffective disorders, 40 of who had co-occurring substance abuse. Of the 79 participants in the OEOD group program, 70 (89%) remained in treatment for the maximum of 3 years. The over-all value of group treatment for this population is reviewed along with the small number of available publications on open-ended and open-door-type groups.

  1. Volunteers: the key that opens the doors for the Open Days

    CERN Multimedia

    Antonella Del Rosso

    2013-01-01

    2013: the year that CERN opens its doors to the public. 2013 is also the approximate number of volunteers needed to ensure that these Open Days (JPO) go ahead smoothly. Whatever your personnel status and function, you, the volunteers, are the key without which the Laboratory’s doors could not really open. Sign up now!   1,500 of you volunteered for the LHC2008 open days to mark the inauguration of the LHC. This year, with roughly 20% more visitors expected across the CERN sites over the two days, the organisers envisage closer to 2,000 volunteers. “We will be holding a wide variety of activities across the Laboratory’s various sites,” explains Virginie Blondeau, the member of the Open Days organising team in charge of recruiting and training volunteers. “As well as guides for the experiments, we will also need volunteers to welcome and direct visitors, to help with logistics and to man the sales points, etc.” The volunteers will rec...

  2. Identity verification using computer vision for automatic garage door opening

    NARCIS (Netherlands)

    Wijnhoven, R.G.J.; With, de P.H.N.

    2011-01-01

    We present a novel system for automatic identification of vehicles as part of an intelligent access control system for a garage entrance. Using a camera in the door, cars are detected and matched to the database of authenticated cars. Once a car is detected, License Plate Recognition (LPR) is

  3. Predictors of Persistent Axial Neck Pain After Cervical Laminoplasty.

    Science.gov (United States)

    Kimura, Atsushi; Shiraishi, Yasuyuki; Inoue, Hirokazu; Endo, Teruaki; Takeshita, Katsushi

    2018-01-01

    Retrospective analysis of prospective data. The aim of this study was to reveal baseline predictors of persistent postlaminoplasty neck pain. Axial neck pain is one of the most common complications after cervical laminoplasty; however, baseline predictors of persistent postlaminoplasty neck pain are unclear. We analyzed data from 156 patients who completed a 2-year follow-up after double-door laminoplasty for degenerative cervical myelopathy. Patients rated the average intensity of axial neck pain in the last month using an 11-point numerical rating scale preoperatively and at the 2-year follow-up. The dependent variable was the presence of moderate-to-severe neck pain (numerical rating scale ≥4) at the 2-year follow-up. The independent variables included patient characteristics, baseline radiological parameters, surgical variables, baseline axial neck pain intensity, and baseline functions, which were measured by the Japanese Orthopaedic Association score and the Short Form-36 survey (SF-36). Logistic regression analysis was performed to identify independent predictors of moderate-to-severe neck pain after laminoplasty. At the 2-year follow-up, 51 patients (32%) had moderate-to-severe neck pain, and 106 patients (68%) had no or mild pain. Univariate analysis revealed that the ratio of cervical anterolisthesis, ratio of current smoking, baseline neck pain intensity, and baseline SF-36 Mental Component Summary differed significantly between the groups. Multivariate logistic regression analysis showed that independent predictors of moderate-to-severe neck pain at the 2-year follow-up include the presence of anterolisthesis, current smoking, moderate-to-severe baseline neck pain, and lower SF-36 Mental Component Summary. The presence of anterolisthesis and moderate-to-severe baseline neck pain were also associated with significantly poorer physical function after surgery. The presence of anterolisthesis was associated not only with the highest odds ratio of

  4. Modified Laminoplasty for Degenerative Cervical Spondylosis: The ...

    African Journals Online (AJOL)

    2018-04-19

    Apr 19, 2018 ... simple procedure that preserves spine stability and minimizes postoperative spinal deformity. KEYWORDS: Cervical spondylosis, laminoplasty, ligamentous suspension .... the risk of iatrogenic neurological injuries associated.

  5. Opening the door to innovation in cloud computing

    OpenAIRE

    Clohessy, Trevor; Acton, Thomas

    2013-01-01

    peer-reviewed This paper describes research-in-progress that explores the applicability and implications of cloud computing in the creation of business value through open innovation. Both the cloud computing and open innovation paradigms represent recent phenomenon and as such many unanswered questions still persist. In responding to this research gap we propose a new value creation framework which is based on a review of the literature on cloud computing, innovation, open innovation and v...

  6. The influence of opening windows and doors on the natural ventilation rate of a residential building

    Science.gov (United States)

    An analysis of air exchange rates due to intentional window and door openings in a research test house located in a residential environment is presented. These data inform the development of ventilation rate control strategies as building envelopes are tightened to improve the e...

  7. The IEA's review of France's energy policy: the challenge of opening the doors

    International Nuclear Information System (INIS)

    Appert, O.

    2000-01-01

    There has been a continuity in French energy policy for several decades now - the aim to guarantee a supply of energy under reliable, economical conditions. The review, which the International Energy Agency has just conducted, notes how successful this policy has been. But it also emphasizes the need for France to open the doors of this market to the rest of Europe. (authors)

  8. Implications of China's Open-Door Policy for Families: A Family Impact Analysis

    Science.gov (United States)

    Quach, Andrew S.; Anderson, Elaine A.

    2008-01-01

    China's open-door policy (ODP) was created in 1978 as a response to the severe economic depression affecting the country after the Cultural Revolution. The policy was designed to restore China's financial status and lift the nation out of destitution. By all accounts, the ODP has been successful in improving the country's monetary condition.…

  9. The influence of opening windows and doors on the natural ventilation rate of a residential building

    Science.gov (United States)

    Increased building energy efficiency is important in reducing national energy use and greenhouse gas emissions. An analysis of air change rates due to door and window openings in a research test house located in a residential environment are presented. These data inform developme...

  10. New MAGLEV link opens door to world sales

    Energy Technology Data Exchange (ETDEWEB)

    1981-03-13

    When the magnetic levitation people mover-or advanced transit shuttle-linking Birmingham airport with the international railway station opens in 1984, it is expected to be the first revenue-earning system of its kind in the world. The project and the high hopes of its backers for future sales are discussed.

  11. Air curtain technology improves working conditions with open hall doors; Luftschleiertechnik verbessert Arbeitsbedingungen bei geoeffneten Hallentoren

    Energy Technology Data Exchange (ETDEWEB)

    Multhauf, R. [Biddle GmbH, Koeln (Germany)

    1998-11-01

    Hall doors are indispensable for short logistic distances of product or raw materials management. Air curtain systems make it possible to keep doors open independent of the weather and season. The heating energy requiremens of modern air curtain systems has been reduced significantly. (orig.) [Deutsch] Hallentore sind fuer moeglichst kurze Logistikwege der Waren oder Rohstoffe im industriellen Betrieb unvermeidlich. Luftschleieranlagen ermoeglichen offene Tore unabhaengig von der Witterung und der Jahreszeit. Die zur Betreibung der Luftschleieranlagen notwendige Heizenergie wurde durch neue Entwicklungen stark reduziert. (orig.)

  12. "On the gate of Arctic": Doors open to foreign schools

    Science.gov (United States)

    Pecchiar, Irene

    2015-04-01

    With the increased attention to the changing of the Arctic Region as a consequence of global climate changes, effective science education, outreach and communication need to be higher priorities within the scientific communities. In order to encourage the dissemination of polar research at educational levels Slovene high school students in Trieste were first engaged at school and at the National Museum of Antarctica of Trieste using conferences and laboratory activities to introduce the main polar climate change topics. Then together with three teachers they visited Tromso University (North Norway) for a week. The first aim of this project was to increase awareness of foreign schools on major topics concerning the Arctic issues (from the economic/social to the environmental/climatic point of view). Forty-three high school students were involved in the laboratory activities running at the University of Tromso and participated in seminars. The topics focused on were Ocean Acidification, Global Warming and the combined effects with other anthropogenic stressors. During their stay, students interviewed several scientists in order to allow them to edit a »visiting report«, that was updated every day in their blog and to elaborate all the material collected (photos, videos, data of laboratory work, reports). In Tromso, they were also introduced to the culture and tradition of the Scandinavian indigenous people at the Center of Sami Study. Back in Italy, they published some articles in local newspapers, and then they presented their results at the National Museum of Antarctica of Trieste about all the data elaboration in an open day exhibition with posters, short movies and PowerPoint presentations. All this work was made in order to pass their experience into the world. This was a pilot project, highlighting the role of universities as links between research and outreach. The next step should be to enlarge these kinds of activities to many Schools, Universities and

  13. Visually and force controlled opening and closing of doors by means of a mobile robot arm

    OpenAIRE

    Milighetti, G.; Hoffmann, E.; Fetzner, Angelika; Kuntze, Helge-Björn

    2012-01-01

    A multi-sensory discrete-continuous control concept has been developed to realize interactive basic skills for humanoid and mobile service robots. In the upper hierarchy level a discrete task control structure enables the flexible execution of primitive skill sequences. In the lower continuous level a suitable controller is chosen with control parameters adapted to the current primitive skill. The basic skill for the frequently occurring task of unlocking and opening a door by means of a mobi...

  14. Opening Doors.

    Science.gov (United States)

    Turner, James S.

    1990-01-01

    Presents five teachers' narratives about their learning experiences during sabbatical leaves funded by the National Endowment for the Humanities/Reader's Digest Teacher-Scholars program. Stresses insights to be incorporated into their teaching methods in English and Black literature, children's literature, Chinese culture, and the history of the…

  15. Laminoplasty and laminectomy for cervical sponydylotic myelopathy: a systematic review

    DEFF Research Database (Denmark)

    Bartels, R.H.M.A.; van Tulder, M.W.; Moojen, W.A.

    2015-01-01

    BACKGROUND: Cervical spondylotic myelopathy is frequently encountered in neurosurgical practice. The posterior surgical approach includes laminectomy and laminoplasty.OBJECTIVE: To perform a systematic review evaluating the effectiveness of posterior laminectomy compared with posterior laminoplasty...

  16. LRO-LAMP failsafe door-open performance: improving FUV measurements of dayside lunar hydration

    Science.gov (United States)

    Davis, Michael W.; Greathouse, Thomas K.; Kaufmann, David E.; Retherford, Kurt D.; Versteeg, Maarten H.

    2017-08-01

    The Lunar Reconnaissance Orbiter's (LRO) Lyman Alpha Mapping Project (LAMP) is a lightweight (6.1 kg), lowpower (4.5 W), ultraviolet spectrograph based on the Alice instruments aboard the European Space Agency's Rosetta spacecraft and NASA's New Horizons spacecraft. Its primary job is to identify and localize exposed water frost in permanently shadowed regions (PSRs) near the Moon's poles, and to characterize landforms and albedos in PSRs. LRO launched on June 18, 2009 and reached lunar orbit four days later. LAMP operated with its failsafe door closed for its first seven years in flight. The failsafe door was opened in October 2016 to increase light throughput during dayside operations at the expense of no longer having the capacity to take further dark observations and slightly more operational complexity to avoid saturating the instrument. This one-time irreversible operation was approved after extensive review, and was conducted flawlessly. The increased throughput allows measurement of dayside hydration in one orbit, instead of averaging multiple orbits together to reach enough signal-to-noise. The new measurement mode allows greater time resolution of dayside water migration for improved investigations into the source and loss processes on the lunar surface. LAMP performance and optical characteristics after the failsafe door opening are described herein, including the new effective area, wavelength solution, and resolution.

  17. Technology Opens Doors to Scientific Discovery, Portrait Unveiled of Former NLM Director Lindberg | NIH MedlinePlus the ...

    Science.gov (United States)

    ... version of this page please turn JavaScript on. Technology Opens Doors to Scientific Discovery Past Issues / Spring 2016 Table of Contents Susannah Fox, chief technology officer of the U.S. Department of Health and ...

  18. Numerical modeling of cold room's hinged door opening and closing processes

    Science.gov (United States)

    Carneiro, R.; Gaspar, P. D.; Silva, P. D.; Domingues, L. C.

    2016-06-01

    The need of rationalize energy consumption in agrifood industry has fasten the development of methodologies to improve the thermal and energy performances of cold rooms. This paper presents a three-dimensional (3D) transient Computational Fluid Dynamics (CFD) modelling of a cold room to evaluate the air infiltration rate through hinged doors. A species transport model is used for modelling the tracer gas concentration decay technique. Numerical predictions indicate that air temperature difference between spaces affects the air infiltration. For this case study, the infiltration rate increases 0.016 m3 s-1 per K of air temperature difference. The knowledge about the evolution of air infiltration during door opening/closing times allows to draw some conclusions about its influence on the air conditions inside the cold room, as well as to suggest best practices and simple technical improvements that can minimize air infiltration, and consequently improve thermal performance and energy consumption rationalization.

  19. Hamming's "open doors" and group creativity as keys to scientific excellence: the example of Cambridge.

    Science.gov (United States)

    Erren, Thomas C

    2008-01-01

    Dr. Charlton used diverse approaches to identify research institutions which provided home to outstanding scientists and work. One intriguing example of long-lasting scientific excellence is Cambridge with 19 Nobel laureates who worked at the University or at the MRC Molecular Biology Unit when they received the prize between 1947 and 2006. With specific reference to Cambridge, I would like to complement the primarily quantitative assessment and offer considerations as to why and how research achievements may have clustered in space and time. Indeed, observations voiced by the mathematician Richard Hamming as to how great research can be pursued offer explanations for the series of great science in the UK. In my view, the most important determinant of the clustering may be illustrated by Hamming's fitting picture of "open doors": working in environments with the doors open allows constant interactions with peers with various disciplinary backgrounds, and thus fast avoidance of detours or dead ends in science and, ultimately, a focus on and the solution of problems of paramount, rather than of tangential, importance. Narrative insights into a strong argumentative tradition at Cambridge provided by Drs. Watson and Magueijo between 1968 and 2003 are in line with Hamming's suggestion and the value of group creativity. In the internet age with abundant interactions beyond home institutions we should not be surprised if clusters of great science were no longer confined to the usual suspect institutions which were awarded disproportionally with Nobel prizes in the past.

  20. Opening Doors to Recovery: Recidivism and Recovery Among Persons With Serious Mental Illnesses and Repeated Hospitalizations.

    Science.gov (United States)

    Compton, Michael T; Kelley, Mary E; Pope, Alicia; Smith, Kelly; Broussard, Beth; Reed, Thomas A; DiPolito, June A; Druss, Benjamin G; Li, Charles; Lott Haynes, Nora

    2016-02-01

    Repeated hospitalizations and arrests or incarcerations diminish the ability of individuals with serious mental illnesses to pursue recovery. Community mental health systems need new models to address recidivism as well as service fragmentation, lack of engagement by local stakeholders, and poor communication between mental health providers and the police. This study examined the initial effects on institutional recidivism and measures of recovery among persons enrolled in Opening Doors to Recovery, an intensive, team-based community support program for persons with mental illness and a history of inpatient psychiatric recidivism. A randomized controlled trial of the model is underway. The number of hospitalizations, days hospitalized, and arrests (all from state administrative sources) in the year before enrollment and during the first 12 months of enrollment in the program were compared. Longitudinal trajectories of recovery-using three self-report and five clinician-rated measures-were examined. Analyses accounted for baseline symptom severity and intensity of involvement in the program. One hundred participants were enrolled, and 72 were included in the analyses. Hospitalizations decreased, from 1.9±1.6 to .6±.9 (precovery measures, and trajectories of improvement were apparent across the entire follow-up period. Opening Doors to Recovery holds promise as a new service approach for reducing hospital recidivism and promoting recovery in community mental health systems and is deserving of further controlled testing.

  1. The Efficacy of Intraoperative Neurophysiological Monitoring Using Transcranial Electrically Stimulated Muscle-evoked Potentials (TcE-MsEPs) for Predicting Postoperative Segmental Upper Extremity Motor Paresis After Cervical Laminoplasty.

    Science.gov (United States)

    Fujiwara, Yasushi; Manabe, Hideki; Izumi, Bunichiro; Tanaka, Hiroyuki; Kawai, Kazumi; Tanaka, Nobuhiro

    2016-05-01

    Prospective study. To investigate the efficacy of transcranial electrically stimulated muscle-evoked potentials (TcE-MsEPs) for predicting postoperative segmental upper extremity palsy following cervical laminoplasty. Postoperative segmental upper extremity palsy, especially in the deltoid and biceps (so-called C5 palsy), is the most common complication following cervical laminoplasty. Some papers have reported that postoperative C5 palsy cannot be predicted by TcE-MsEPs, although others have reported that it can be predicted. This study included 160 consecutive cases that underwent open-door laminoplasty, and TcE-MsEP monitoring was performed in the biceps brachii, triceps brachii, abductor digiti minimi, tibialis anterior, and abductor hallucis. A >50% decrease in the wave amplitude was defined as an alarm point. According to the monitoring alarm, interventions were performed, which include steroid administration, foraminotomies, etc. Postoperative deltoid and biceps palsy occurred in 5 cases. Among the 155 cases without segmental upper extremity palsy, there were no monitoring alarms. Among the 5 deltoid and biceps palsy cases, 3 had significant wave amplitude decreases in the biceps during surgery, and palsy occurred when the patients awoke from anesthesia (acute type). In the other 2 cases in which the palsy occurred 2 days after the operation (delayed type), there were no significant wave decreases. In all of the cases, the palsy was completely resolved within 6 months. The majority of C5 palsies have been reported to occur several days after surgery, but some of them have been reported to occur immediately after surgery. Our results demonstrated that TcE-MsEPs can predict the acute type, whereas the delayed type cannot be predicted. A >50% wave amplitude decrease in the biceps is useful to predict acute-type segmental upper extremity palsy. Further examination about the interventions for monitoring alarm will be essential for preventing palsy.

  2. Through the Open Door--Today's Revolution in Open Access and Distance Learning.

    Science.gov (United States)

    Bennett, Roger, Ed.

    1986-01-01

    Consists of eight articles discussing the topic of open learning. Articles address (1) definitions, (2) corporate training, (3) further education programs, (4) university-based training, (5) distance learning, (6) learning to learn, (7) Britain's Open University, (8) the Business-Technical Education Council. (CH)

  3. Closed windows, open doors: geopolitics and post-1949 Mainland Chinese immigration to Canada.

    Science.gov (United States)

    Liu X-f; Norcliffe, G

    1996-01-01

    "Since 1949 there have been dramatic changes in the flow of migrants from Mainland China to Canada, which existing structural models of migration, emphasizing factors in the destination country, do not fully capture. Conditions in the country of origin, and geopolitical relationships between China and Canada, played a decisive role in this migration.... Changing geopolitical circumstances led China to develop an open-door policy between 1973 and 1989, leading to increasing flows of migrants to Canada. The political response in Canada to the Tiananmen Square massacre of 1989 was to allow all Chinese students and workers in Canada to stay, if they so wished.... The result was a large inflow making MCIS the third-largest group of immigrants to Canada in the early 1990s." (EXCERPT)

  4. The effect of laminar air flow and door openings on operating room contamination.

    Science.gov (United States)

    Smith, Eric B; Raphael, Ibrahim J; Maltenfort, Mitchell G; Honsawek, Sittisak; Dolan, Kyle; Younkins, Elizabeth A

    2013-10-01

    We evaluate the association of laminar airflow (LAF) and OR traffic with intraoperative contamination rates. Two sterile basins were placed in each room during 81 cases, one inside and one outside the LAF. One Replicate Organism Detection and Counting (RODAC) plate from each basin was sent for culture at successive 30-minute intervals from incision time until wound closure. At successive 30-minute intervals more plates were contaminated outside than inside the LAF. A negative binomial model showed that the bacteria colony forming units (CFU) depended on whether there were any door openings (P=0.02) and the presence of LAF (P=0.003). LAF decreases CFU by 36.6%. LAF independently reduces the risk of contamination and microbial counts for surgeries lasting 90 minutes or less. © 2013.

  5. Opening the Doors to Knowledge: Rebus’ Collaborative Publishing Model for Open Textbooks

    OpenAIRE

    Ashok, Apurva

    2017-01-01

    Over the last thirty years, the cost of education has become prohibitively expensive, both in terms of tuition and with reference to rising textbook costs. In response, organizations such as the Rebus Foundation are working towards the development of scalable models of Open Textbook creation. This report outlines, examines, and critiques Rebus’ efforts. It historicizes the Open Education Movement, and delineates Rebus’ role within the current textbook publishing landscape. Concentrating on th...

  6. Opening the Door to the American Dream: Increasing Higher Education Access and Success for Immigrants. New York Fact Sheet

    Science.gov (United States)

    Erisman, Wendy; Looney, Shannon

    2008-01-01

    This fact sheet presents a snapshot of important facts that are specific to the state of New York from the "Opening the Door to the American Dream: Increasing Higher Education Access and Success for Immigrants" report, which exposes systemic barriers that prevent immigrants from entering college and/or completing bachelor's degrees…

  7. Open Source Opens Doors: Repurposing Library Software to Facilitate Faculty Research and Collaboration

    Directory of Open Access Journals (Sweden)

    Sandra L. Stump

    2013-10-01

    Full Text Available Normal 0 false false false EN-US X-NONE X-NONE Asked to convert a faculty-created Microsoft Word document of biblical references found within popular films into a searchable database for scholars, the Albright College library staff helped create a multi-access database called Bible in the Reel World. The database relied on student workers for inputting data, used MARC standard formatting for future portability, and encouraged interactive feedback, enabling scholars to submit comments and suggest additional films and references. Using the open source integrated library system Koha, MarcEdit software, and free record exporting from IMDb, library staff created a fully-searchable database for researchers and scholars to examine the use of scripture in popular film.

  8. Impact of Cervical Sagittal Alignment on Axial Neck Pain and Health-related Quality of Life After Cervical Laminoplasty in Patients With Cervical Spondylotic Myelopathy or Ossification of the Posterior Longitudinal Ligament: A Prospective Comparative Study.

    Science.gov (United States)

    Fujiwara, Hiroyasu; Oda, Takenori; Makino, Takahiro; Moriguchi, Yu; Yonenobu, Kazuo; Kaito, Takashi

    2018-05-01

    This is prospective observational study. To prospectively investigate the correlation among axial neck pain; a newly developed patient-based quality of life outcome measure, the Japanese Orthopaedic Association Cervical Myelopathy Evaluation Questionnaire (JOACMEQ); and cervical sagittal alignment after open-door laminoplasty for cervical myelopathy. Many studies have focused on postoperative axial neck pain after laminoplasty. However, the correlation among cervical sagittal alignment, neck pain, and JOACMEQ has not been investigated. In total, 57 consecutive patients treated by open-door laminoplasty for cervical myelopathy were included (mean age, 63.7 y; 15 women and 42 men) and divided into 2 groups according to diagnosis [cervical spondylotic myelopathy (CSM) group: 35 patients, and ossification of the posterior longitudinal ligament (OPLL) group: 22 patients]. JOA score, a subdomain of cervical spine function (CSF) in the JOACMEQ, and the visual analog scale for axial neck pain were assessed preoperatively and 12 months postoperatively. Radiographic cervical sagittal parameters were measured by C2 sagittal vertical axis (C2 SVA), C2-C7 lordosis, C7 sagittal slope (C7 slope), and range of motion. C2 SVA values in both groups shifted slightly anteriorly between preoperative and 12-month postoperative measurements (CSM: +19.7±10.9 mm; OPLL: +22.1±13.4 mm vs. CSM: +23.2±16.1 mm; OPLL: +28.7±15.4 mm, respectively). Postoperative axial neck pain in the OPLL group showed strong negative correlations with C2 SVA and C7 slope. Strong negative correlations were found between axial neck pain and CSF in both the preoperative CSM and OPLL groups (CSM: r=-0.45, P=0.01; OPLL: r=-0.61, Ppain and CSF in the postoperative OPLL group (r=-0.51, P=0.05). This study demonstrated a significant negative correlation between neck pain and CSF in both the CSM and OPLL groups preoperatively and in the OPLL group postoperatively. Radiographic cervical sagittal alignment

  9. Autonomous urban reconnaissance ingress system (AURIS): providing a tactically relevant autonomous door-opening kit for unmanned ground vehicles

    Science.gov (United States)

    Shane, David J.; Rufo, Michael A.; Berkemeier, Matthew D.; Alberts, Joel A.

    2012-06-01

    The Autonomous Urban Reconnaissance Ingress System (AURIS™) addresses a significant limitation of current military and first responder robotics technology: the inability of reconnaissance robots to open doors. Leveraging user testing as a baseline, the program has derived specifications necessary for military personnel to open doors with fielded UGVs (Unmanned Ground Vehicles), and evaluates the technology's impact on operational mission areas: duration, timing, and user patience in developing a tactically relevant, safe, and effective system. Funding is provided through the US ARMY Tank Automotive Research, Development and Engineering Center (TARDEC) and the project represents a leap forward in perception, autonomy, robotic implements, and coordinated payload operation in UGVs. This paper describes high level details of specification generation, status of the last phase of development, an advanced view of the system autonomy capability, and a short look ahead towards the ongoing work on this compelling and important technology.

  10. From anonymity to "open doors": IRB responses to tensions with researchers.

    Science.gov (United States)

    Klitzman, Robert

    2012-07-03

    Tensions between IRBs and researchers in the US and elsewhere have increased, and may affect whether, how, and to what degree researchers comply with ethical guidelines. Yet whether, how, when, and why IRBs respond to these conflicts have received little systematic attention. I contacted 60 US IRBs (every fourth one in the list of the top 240 institutions by NIH funding), and interviewed leaders from 34 (response rate = 55%) and an additional 12 members and administrators. IRBs often try to respond to tensions with researchers and improve relationships in several ways, but range widely in how, when, and to what degree (e.g., in formal and informal structure, content, and tone of interactions). IRBs varied from open and accessible to more distant and anonymous, and in the amount and type of "PR work" and outreach they do. Many boards seek to improve the quantity, quality, and helpfulness of communication with PIs, but differ in how. IRBs range in meetings from open to closed, and may have clinics and newsletters. Memos can vary in helpfulness and tone (e.g., using "charm"). IRBs range considerably, too, in the degrees to which they seek to educate PIs, showing them the underlying ethical principles. But these efforts take time and resources, and IRBs thus vary in degrees of responses to PI complaints. This study, the first to explore the mechanisms through which IRBs respond to tensions and interactions with PIs, suggests that these committees seek to respond to conflicts with PIs in varying ways - both formal and informal, involving both the form and content of communications. This study has important implications for future practice, research, and policy, suggesting needs for increased attention to not only what IRBs communicate to PIs, but how (i.e., the tone and the nature of interactions). IRBs can potentially improve relationships with PIs in several ways: using more "open doors" rather than anonymity, engaging in outreach (e.g., through clinics), enhancing

  11. Metabolomics - A wide-open door to personalized treatment in chronic heart failure?

    Science.gov (United States)

    Marcinkiewicz-Siemion, M; Ciborowski, M; Kretowski, A; Musial, W J; Kaminski, K A

    2016-09-15

    Heart failure (HF) is a complex syndrome representing a final stage of various cardiovascular diseases. Despite significant improvement in the diagnosis and treatment (e.g. ACE-inhibitors, β-blockers, aldosterone antagonists, cardiac resynchronization therapy) of the disease, prognosis of optimally treated patients remains very serious and HF mortality is still unacceptably high. Therefore there is a strong need for further exploration of novel analytical methods, predictive and prognostic biomarkers and more personalized treatment. The metabolism of the failing heart being significantly impaired from its baseline state may be a future target not only for biomarker discovery but also for the pharmacologic intervention. However, an assessment of a particular, isolated metabolite or protein cannot be fully informative and makes a correct interpretation difficult. On the other hand, metabolites profile analysis may greatly assist investigator in an interpretation of the altered pathway dynamics, especially when combined with other lines of evidence (e.g. metabolites from the same pathway, transcriptomics, proteomics). Despite many prior studies on metabolism, the knowledge of peripheral and cardiac pathophysiological mechanisms responsible for the metabolic imbalance and progression of the disease is still insufficient. Metabolomics enabling comprehensive characterization of low molecular weight metabolites (e.g. lipids, sugars, organic acids, amino acids) that reflects the complete metabolic phenotype seems to be the key for further potential improvement in HF treatment (diet-based or biochemical-based). Will this -omics technique one day open a door to easy patients identification before they have a heart failure onset or its decompensation? Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  12. [The psychiatric revolution in Quebec, 1950-1962. From asylum to community psychiatry and the open door].

    Science.gov (United States)

    Duprey, Catherine

    2011-01-01

    Psychiatry opens to the world at a time when the very basis of psychiatric practice, namely the asylum, is called into question. Studies appear in Quebec and Canadian journals concurrent to the introduction of new formulas for care, such as the delivery of psychiatric services in general hospitals and clinics, that allow patients to be treated outside the walls of psychiatric hospitals. In addition, postwar psychiatry takes an optimistic view toward the future of children with impairments through the creation of specialized schools and workshops. From the mid-20th century onward, the thinking in psychiatry centres on the open door.

  13. Laminoplasty Techniques for the Treatment of Multilevel Cervical Stenosis

    Directory of Open Access Journals (Sweden)

    Lance K. Mitsunaga

    2012-01-01

    Full Text Available Laminoplasty is one surgical option for cervical spondylotic myelopathy. It was developed to avoid the significant risk of complications associated with alternative surgical options such as anterior decompression and fusion and laminectomy with or without posterior fusion. Various laminoplasty techniques have been described. All of these variations are designed to reposition the laminae and expand the spinal canal while retaining the dorsal elements to protect the dura from scar formation and to preserve postoperative cervical stability and alignment. With the right surgical indications, reliable results can be expected with laminoplasty in treating patients with multilevel cervical myelopathy.

  14. The Reliability Estimation for the Open Function of Cabin Door Affected by the Imprecise Judgment Corresponding to Distribution Hypothesis

    Science.gov (United States)

    Yu, Z. P.; Yue, Z. F.; Liu, W.

    2018-05-01

    With the development of artificial intelligence, more and more reliability experts have noticed the roles of subjective information in the reliability design of complex system. Therefore, based on the certain numbers of experiment data and expert judgments, we have divided the reliability estimation based on distribution hypothesis into cognition process and reliability calculation. Consequently, for an illustration of this modification, we have taken the information fusion based on intuitional fuzzy belief functions as the diagnosis model of cognition process, and finished the reliability estimation for the open function of cabin door affected by the imprecise judgment corresponding to distribution hypothesis.

  15. Solar cell degradation under open circuit condition in out-doors-in desert region

    Directory of Open Access Journals (Sweden)

    M. Boussaid

    Full Text Available The reliability of solar cells is an important parameter in the design of photovoltaic systems and particularly for cost estimation. Solar cell degradation is the result of various operating conditions; temperature is one of most important factors. Installed PV modules in desert regions are subjected to various temperature changes with significant gradient leading to accelerated degradation. In the present work, we demonstrate the influence of open-circuit condition on the degradation of PV modules. The experiment is carried out in the desert region of ADRAR (southern Algeria using two modules IJISEL of single-crystal silicon. A continuous monitoring allows analysis of both performances of modules for duration of 330 days. The module in open-circuit condition reaches higher temperature means than the module in charging condition; therefore, it undergoes a higher degradation. By simulation, we found that the life of a PV module (whose power output is close to 50% in a condition of an open-circuit in the desert region could be reduced to 4 years, and that has a significant impact on economy. Keywords: WEIBULL, Photovoltaic, Degradation, Open-circuit, Single-crystal, Silicon

  16. Language Policy in Puerto Rico's Higher Education: Opening the Door for Translanguaging Practices

    Science.gov (United States)

    Carroll, Kevin S.; Mazak, Catherine M.

    2017-01-01

    This paper investigates the relationship between meso university language policies in Puerto Rico and their micro instantiations in an undergraduate psychology classroom. We describe a typology of language policies used by 38 universities and campuses in Puerto Rico where their openness allows for flexible implementation of everyday micro policy.…

  17. New customizable phased array UT instrument opens door for furthering research and better industrial implementation

    International Nuclear Information System (INIS)

    Dao, Gavin; Ginzel, Robert

    2014-01-01

    Phased array UT as an inspection technique in itself continues to gain wide acceptance. However, there is much room for improvement in terms of implementation of Phased Array (PA) technology for every unique NDT application across several industries (e.g. oil and petroleum, nuclear and power generation, steel manufacturing, etc.). Having full control of the phased array instrument and customizing a software solution is necessary for more seamless and efficient inspections, from setting the PA parameters, collecting data and reporting, to the final analysis. NDT researchers and academics also need a flexible and open platform to be able to control various aspects of the phased array process. A high performance instrument with advanced PA features, faster data rates, a smaller form factor, and capability to adapt to specific applications, will be discussed

  18. An open door for illegal trade: online sale of Strombocactus disciformis (Cactaceae

    Directory of Open Access Journals (Sweden)

    Vania R. Olmos-Lau

    2016-09-01

    Full Text Available Online trade of CITES listed species has become a persistent threat which is difficult to measure and control. The use of online markets is growing day by the day as technology becomes more available and familiar to people of all ages and interests. Species trade can now be propagated remotely hardly without any real human interaction. We develop a quick-easy method to assess the online availability of the genus Strombocactus, a highly collectible cactus, to understand the real magnitude of this new form of threat and the possible menace it could be for these Mexican cacti. We used the Google.com site to do an online search in four languages (Spanish, English, French and German for the offer of adult plants or seeds. We found specimens and seeds available in major online markets like ebay, amazon, cactusplaza.com and mercado libre. Plant price range from €10.00 to €30.00 plus shipping and handling. The plants were also offered in local online stores in countries like the USA, France, Germany, Australia, Czech Republic, the United Kingdom, and others; some sellers claim they have no obstacles for “shipping across countries” and others openly declare the natural localities where seeds were extracted. Only a minority of these online stores openly stated that the cacti were obtained from CITES registered nurseries or that the cacti were grown through propagules or seeds. Our method is easily transferable to estimate the illegal market for any species. There is an active online trade of Strombocactus species and other species listed in CITES without the necessary documentation. Compliance or other regulation mechanisms are needed in order to promote species conservation.

  19. Abriendo puertas: conociendo a un celiaco Opening the Doors: Getting to know a celiac

    Directory of Open Access Journals (Sweden)

    María del Mar Ferre Rovira

    2010-12-01

    Full Text Available Justificación: La enfermedad celiaca o celiaquía es una intolerancia al gluten, afecta a cualquier grupo étnico o región, afectando a todas la dimensiones de la vida de los que la padecen. El tratamiento se centra, únicamente, en tomar una dieta sin gluten de por vida. Teniendo en cuenta que el trigo es el cereal de consumo mayoritario en países occidentales, adherirse a esta dieta puede ser realmente dificultoso. Objetivos: Conocer cómo afecta el seguimiento de la dieta sin gluten en la vida cotidiana del celiaco para mejorar su calidad de vida. Diseño: Estudio de caso. Metodología: Entrevistas abiertas semiestructuradas al paciente celiaco y a su entorno más cercano (madre y amigos, así como al enfermero y al trabajador social de su Centro de Salud. Resultados-conclusiones: El seguimiento de la dieta sin gluten afecta tanto a la dimensión personal, familiar y social y económica de la persona celiaca.Background: Celiac disease is an intolerance to gluten, that can affect any ethnicgroup in any region, as well as all aspects of the lives of those who suffer from it. The treatment for this pathology focuses solely on a gluten-free diet for life. Bearing in mind that wheat is the most widely consumed cerealin Western countries, maintaining such a diet can be difficult. Objectives: To learn how a life-long, gluten-free diet daily affects those who suffer from celiac disease in order to be able to improve their quality of life. Design: A case study. Methodology: Conducting open, semi-structured interviews with a patient suffering from celiac disease and those closest to him (mother and friends, as well as with the male nurse and the social worker from his Health Centre. Results and conclusions: A gluten-free diet affects the personal, family and social and economic aspects of the life of an individual suffering from celiac disease.

  20. [Interdisciplinary pain assessment in the hospital setting : Merely a door-opener to multimodal pain therapy?

    Science.gov (United States)

    Sens, E; Mothes-Lasch, M; Lutz, J F

    2017-12-01

    Chronic pain is characterized by a complex interaction of somatic, mental and social factors. Assessing these factors in patients with chronic pain is vital during the diagnostic work-up and when making a structured treatment plan. Interdisciplinary pain assessment (ISA) is the most promising method to deal with these challenges. This article presents our experience in performing pain assessments in the hospital setting and also illustrates the characteristic features of chronic pain patients undergoing such assessments. This study reviews and evaluates patient data from 2704 ISAs performed at the Interdisciplinary Pain Centre of the Zentralklinik Bad Berka, Germany, between 2008 and 2015. The majority of our ISA patients are severely handicapped and show distinct signs of chronic disease. A large proportion of patients is either unable to work or receiving benefits (invalidity pension or retirement pension). In addition, patients reported long disease durations and high emotional distress. Treatment recommendations were based on the patients' individual clinical presentations and examination results. More than half of the patients required multimodal pain management, while adjustments or therapeutic withdrawal of pain medications, in particular of opioids, were indicated in many patients. Our study shows that ISA enables fast, high-quality diagnostic assessments of chronic pain while taking the biopsychosocial model of pain in particular into account. In addition, ISA is not biased with regard to outcome results and recommends the further treatment that appears best for the individual patient. ISA leads not only to inpatient treatment, but also to treatment in other therapeutic settings and, as such, is not merely a door-opener to multimodal pain therapy.

  1. These Doors Are Open!

    Science.gov (United States)

    Achinstein, Betty; Athanases, Steven Z.; Curry, Marnie W.; Ogawa, Rodney T.; de Oliveira, Luciana C.

    2013-01-01

    Lower-income students of color in California are often underserved, as evidenced by low-resourced schools, an achievement gap, and low college-going rates. Educators increasingly call for "community schools" that link schools with community members and agencies to promote educational achievement and to access communities as resources for…

  2. The ICTJA-CSIC Science Week 2016: an open door to Earth Sciences for secondary education students

    Science.gov (United States)

    Cortes-Picas, Jordi; Diaz, Jordi; Fernandez-Turiel, Jose-Luis; Garcia-Castellanos, Daniel; Geyer, Adelina; Jurado, Maria-Jose; Montoya, Encarni; Rejas Alejos, Marta; Sánchez-Pastor, Pilar; Valverde-Perez, Angel

    2017-04-01

    The Science Week is one of the main scientific outreach events every year in Spain. The Institute of Earth Sciences Jaume Almera of CSIC (ICTJA-CSIC) participates in it since many years ago, opening its doors and proposing several activities in which it is shown what kind of multidisciplinary research is being developed at the Institute and in Geosciences. The activities,developed as workshops, are designed and conducted by scientific and technical personnel of the centre, who participates in the Science Week voluntarily. The activities proposed by the ICTJA-CSIC staff are designed for a target audience composed by secondary school students (12-18 years). The ICTJA-CSIC joined Science Week 2016 in the framework of the activity entitled "What we investigate in Earth Sciences?". The aim is to show to the society what is being investigated in the ICTJA-CSIC. In addition, it is intended, with the contact and interaction between the public and the institute researchers, to increase the interest in scientific activity and, if possible, to generate new vocations in the field of the Earth Sciences among secondary school pupils. We show in this communication the experience of the Science Week 2016 at the ICTJA-CSIC, carried out with the effort and commitment of the of the Institute's personnel with the outreach of Earth Sciences research. Between November 14th and 19th 2016, more than 100 students from four secondary schools from Barcelona area visited the Institute and took part in the Science Week. A total of six interactive workshops were prepared showing different features of seismology, geophysical borehole logging, analog and digital modelling, paleoecology, volcanology and geochemistry. As a novelty, this year a new workshop based on an augmented reality sandbox was offered to show and to simulate the processes of creation and evolution of the topographic relief. In addition, within the workshop dedicated to geophysical borehole logging, six exact replicates of

  3. Window and door opening behavior, carbon dioxide concentration, temperature, and energy use during the heating season in classrooms with different ventilation retrofits—ASHRAE RP1624

    DEFF Research Database (Denmark)

    Heebøll, Anna; Wargocki, Pawel; Toftum, Jørn

    2018-01-01

    of Copenhagen, Denmark, were retrofitted either with a decentralized, balanced supply and exhaust mechanical ventilation unit with heat recovery; automatically operable windows with an exhaust fan; automatically operable windows with alternating counter-flow heat recovery through slots in the outside wall......; or a visual feedback display unit showing the current classroom carbon dioxide concentration, thus advising when the windows should be opened. For comparison, one classroom retained the original approach for achieving ventilation by manual opening of windows. One year after retrofitting the classrooms carbon...... dioxide concentrations, temperatures, energy use, and window and door opening behavior were recorded during a four week period in the heating season in January. The measured carbon dioxide concentrations were significantly lower in the classrooms with the mechanical ventilation system and the system...

  4. Predictors of cervical lordosis loss after laminoplasty in patients with cervical spondylotic myelopathy.

    Science.gov (United States)

    Zhang, Jing Tao; Li, Jia Qi; Niu, Rui Jie; Liu, Zhao; Tong, Tong; Shen, Yong

    2017-04-01

    To determine whether radiological, clinical, and demographic findings in patients with cervical spondylotic myelopathy (CSM) were independently associated with loss of cervical lordosis (LCL) after laminoplasty. The prospective study included 41 consecutive patients who underwent laminoplasty for CSM. The difference in C2-7 Cobb angle between the postoperative and preoperative films was used to evaluate change in cervical alignment. Age, sex, body mass index (BMI), smoking history, preoperative C2-7 Cobb angle, T1 slope, C2-7 range of motion (C2-7 ROM), C2-7 sagittal vertical axis (C2-7 SVA), and cephalad vertebral level undergoing laminoplasty (CVLL) were assessed. Data were analyzed using Pearson and Spearman correlation test, and univariate and stepwise multivariate linear regression. T1 slope, C2-7 SVA, and CVLL significantly correlated with LCL (P < 0.001), whereas age, BMI, and preoperative C2-7 Cobb angle did not. In multiple linear regression analysis, higher T1 slope (B = 0.351, P = 0.037), greater C2-7 SVA (B = 0.393, P < 0.001), and starting laminoplasty at C4 level (B = - 7.038, P < 0.001) were significantly associated with higher postoperative LCL. Cervical alignment was compromised after laminoplasty in patients with CSM, and the degree of LCL was associated with preoperative T1 slope, C2-7 SVA, and CVLL.

  5. Dramatically Bringing down the Cost of Education with OER: How Open Education Resources Unlock the Door to Free Learning

    Science.gov (United States)

    Wiley, David; Green, Cable; Soares, Louis

    2012-01-01

    The nation is in the midst of a revolution in education. For the first time in human history, tools to enable everyone to attain all the education they desire are available. And best of all this education is available at almost no cost. The key to this sea of change in learning is open education resources, or OER. OER are educational materials…

  6. Retrofit curtain for overhead doors

    Energy Technology Data Exchange (ETDEWEB)

    Leckie, R E

    1987-12-29

    A heat insulating curtain has been developed for reducing heat losses through overhead doors of the type commonly found in industrial warehouses. The curtain consists of a reinforced polyester fabric attached to the outside top of the overhead door and moves with the door as it opens and closes. A T-shaped edge track seals the edges of the curtain to the door frame; the edge of the curtain is also T-shaped and runs up and down the track as the curtain is raised and lowered. The curtain fabric is ultraviolet resistant, durable, flexible, and transparent, and transforms the door into a solar collector which provides solar heated air to the building interior. Two curtains have been satisfactorily installed and tested at a warehouse in Calgary, Alberta. A market evaluation study was conducted to determine the possible buyers for such a door curtain. A target market consisting of those wishing to fix old, leaky doors was selected and a marketing strategy developed. The described strategy includes product development, pricing, distribution, promotion, and advertising. 2 figs., 1 tab.

  7. An evaluation of NCRP report 151--radiation shielding design for radiotherapy facilities, and a feasibility study for 6 MV open-door treatments in an existing high-energy radiation therapy bunker

    Science.gov (United States)

    Kildea, John

    This thesis describes a study of shielding design techniques used for radiation therapy facilities that employ megavoltage linear accelerators. Specifically, an evaluation of the shielding design formalism described in NCRP report 151 was undertaken and a feasibility study for open-door 6 MV radiation therapy treatments in existing 6 MV, 18 MV treatment rooms at the Montreal General Hospital (MGH) was conducted. To evaluate the shielding design formalism of NCRP 151, barrier-attenuated equivalent doses were measured for several of the treatment rooms at the MGH and compared with expectations from NCRP 151 calculations. It was found that, while the insight and recommendations of NCRP 151 are very valuable, its dose predictions are not always correct. As such, the NCRP 151 methodology is best used in conjunction with physical measurements. The feasibility study for 6 MV open-door treatments made use of the NCRP 151 formalism, together with physical measurements for realistic 6 MV workloads. The results suggest that, dosimetrically, 6 MV open door treatments are feasible. A conservative estimate for the increased dose at the door arising from such treatments is 0.1 mSv, with a 1/8 occupancy factor, as recommended in NCRP 151, included.

  8. Doors are opening at children’s day-care centre at Champs-Fréchets

    CERN Multimedia

    HR Department

    2008-01-01

    Opened in August 2008, this new centre offers day-care for children between the ages of 4 months and 4 years. Following an agreement with CERN, up to 20 places are reserved for members of the CERN personnel. The commune of Meyrin invites interested parents to come and visit the centre on Saturday 11 October 2008 from 10 a.m. to 4 p.m. Address : 69, rue des Lattes -1217 Meyrin Further information on the agreement with CERN: https://cern.ch/hr-services/Ben/Social/EVE.asp

  9. Upgrading inflatable door seals

    International Nuclear Information System (INIS)

    Sykes, T.M.; Metcalfe, R.; Welch, L.A.; Josefowich, J.M.

    1997-01-01

    Inflatable door seals are used for airlocks in CANDU stations. They have been a significant source of unreliability and maintenance cost. A program is underway to improve their performance and reliability, backed by environmental qualification testing. Only commercial products and suppliers existed in 1993. For historical reasons, these 'existing products' did not use the most durable material then available. In hindsight, neither had they been adapted nor optimized to combat conditions often experienced in the plants-sagging doors, damaged sealing surfaces, and many thousands of openings and closings per year. Initial attempts to involve the two existing suppliers in efforts to upgrade these seals were unsuccessful. Another suitable supplier had therefore to be found, and a 'new,' COG-owned seal developed; this was completed in 1997. This paper summarizes its testing, along with that of the two existing products. Resistance to aging has been improved significantly. Testing has shown that an accident can be safely withstood after 10 years of service or 40,000 openings-closings, whichever comes first. AECL's Fluid Sealing Technology Unit (FSTU) has invested in the special moulds, test fixtures and other necessary tooling and documentation required to begin commercial manufacture of this new quality product. Accordingly, as with FSTU's other nuclear products such as pump seals, the long-term supply of door seals to CANDU plants is now protected from many external uncertainties-e.g., commercial products being discontinued, materials being changed, companies going out of business. Manufacturing to AECL's detailed specifications is being subcontracted to the new supplier. FSTU is performing the quality surveillance, inspection, testing, and customer service activities concomitant with direct responsibility for supply to the plants. (author)

  10. Gas dynamic laser having shutter doors

    International Nuclear Information System (INIS)

    Olinger, J.B. Jr.; Wahl, R.L.

    1975-01-01

    A gas dynamic laser is shown wherein gases containing constituents necessary to obtain a lasing action are passed through a nozzle array and directed into a lasing cavity and through a diffuser to an exit. An opening is located on each side of said lasing cavity with a shutter box outside of said cavity having a shutter door for opening or closing said opening. A mirror box is located behind each shutter box and contains a mirror. These mirrors are aligned with the openings in the lasing cavity with each door positioned between an opening and a mirror. Another outlet opening is positioned downstream of the first opening which provides an outlet opening for a laser beam. A shutter box is located around this opening and also houses a shutter door for opening and closing said opening. The mirror box which extends behind this shutter box includes opening means for permitting the output beam to pass through an aerodynamic window to atmosphere. Actuating means are provided for rapidly opening and closing said shutter doors. Bearing means including recirculating balls are located on the top and bottom of each shutter door to ride in tracks at an angle to the sealing surface on the laser device. Vacuum means are provided to reduce the pressure in the shutter box and mirror box independently of the pressure in the lasing cavity

  11. Comparative study of perioperative complication rates of cervical laminoplasty performed by residents and teaching neurosurgeons.

    Science.gov (United States)

    Niimura, Manabu; Takai, Keisuke; Taniguchi, Makoto

    2017-11-01

    Early surgical education is required for neurosurgical residents to learn many surgical procedures. However, the participation of less experienced residents may increase perioperative complication rates. Perioperative complication studies in the field of neurosurgery are being increasingly published; however, studies have not yet focused on cervical laminoplasty. The study population included 193 consecutive patients who underwent cervical laminoplasty in Tokyo Metropolitan Neurological Hospital between 2008 and 2014. Patient and surgeon background factors, as well as perioperative complication rates were retrospectively compared between resident and board-certified spine neurosurgeon groups. Deteriorated or newly developed neurological deficits and surgical site complications within 30days of cervical laminoplasty were defined as perioperative complications. Out of 193 patients, 123 (64%) were operated on by residents as the first operator and 70 (36%) by board-certified spine neurosurgeons. No significant differences were observed in patient and surgeon factors between the two groups, except for hyperlipidemia (13 vs 17, p=0.02). Furthermore, no significant differences were noted in perioperative complication rates between the two groups (7 [5.7%] vs 4 [5.7%], p=1). Cervical laminoplasty performed in a standardized manner by residents who received their surgical training in our hospital did not increase perioperative complication rates, and ensured the safety of patients. Copyright © 2017 Elsevier Ltd. All rights reserved.

  12. Crystal structure of snake venom acetylcholinesterase in complex with inhibitory antibody fragment Fab410 bound at the peripheral site: evidence for open and closed states of a back door channel.

    Science.gov (United States)

    Bourne, Yves; Renault, Ludovic; Marchot, Pascale

    2015-01-16

    The acetylcholinesterase found in the venom of Bungarus fasciatus (BfAChE) is produced as a soluble, non-amphiphilic monomer with a canonical catalytic domain but a distinct C terminus compared with the other vertebrate enzymes. Moreover, the peripheral anionic site of BfAChE, a surface site located at the active site gorge entrance, bears two substitutions altering sensitivity to cationic inhibitors. Antibody Elec410, generated against Electrophorus electricus acetylcholinesterase (EeAChE), inhibits EeAChE and BfAChE by binding to their peripheral sites. However, both complexes retain significant residual catalytic activity, suggesting incomplete gorge occlusion by bound antibody and/or high frequency back door opening. To explore a novel acetylcholinesterase species, ascertain the molecular bases of inhibition by Elec410, and document the determinants and mechanisms for back door opening, we solved a 2.7-Å resolution crystal structure of natural BfAChE in complex with antibody fragment Fab410. Crystalline BfAChE forms the canonical dimer found in all acetylcholinesterase structures. Equally represented open and closed states of a back door channel, associated with alternate positions of a tyrosine phenol ring at the active site base, coexist in each subunit. At the BfAChE molecular surface, Fab410 is seated on the long Ω-loop between two N-glycan chains and partially occludes the gorge entrance, a position that fully reflects the available mutagenesis and biochemical data. Experimentally based flexible molecular docking supports a similar Fab410 binding mode onto the EeAChE antigen. These data document the molecular and dynamic peculiarities of BfAChE with high frequency back door opening, and the mode of action of Elec410 as one of the largest peptidic inhibitors targeting the acetylcholinesterase peripheral site. © 2015 by The American Society for Biochemistry and Molecular Biology, Inc.

  13. Opening the Doors of History

    Institute of Scientific and Technical Information of China (English)

    WANG HAIRONG

    2011-01-01

    China is blessed with a long history,and for millenniums the people of China have used history as a mirror to learn from the past.An important part of the country's history,all the archives of the Communist Party of China (CPC) and the Central Government of the People's Republic of China (PRC) are housed in the Central Archives of China,also known as the State Archives Administration.

  14. Opening the Doors of History

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    China’s Central Archives aspires to improve public access to information China is blessed with a long history,and for millenniums the people of China have used history as a mirror to learn from the past. An important part of the country’s history, all the archives of the Communist Party of China (CPC)

  15. SESAME: opening doors through science

    CERN Multimedia

    Pauline Gagnon

    2012-01-01

    Two Pakistani scientists arrived at CERN on 2 February at the height of the cold snap. They will spend the coming year working in collaboration with CERN’s magnet experts, learning the technology and contributing to ongoing projects.   Sumera Yamin (left) and Khalid Mansoor Hassan (right) with quadrupole magnets in the I8 testing facility. Sumera Yamin, a physicist, and Khalid Mansoor Hassan, an electrical engineer, both from the National Centre for Physics in Islamabad, came to CERN under an agreement with Pakistan. “They started contributing right away, helping us design and build new magnets for the ALPHA experiment,” says Davide Tommasini, Head of the resistive magnet section. “They fitted right in, just like I had expected. It is amazing to see that all scientists share the same approach.” The two scientists will also contribute to some aspects of the magnet design and the technical specifications for the SESAME project, the Synchrotron-...

  16. Windows and doors

    Energy Technology Data Exchange (ETDEWEB)

    1988-01-01

    A complete manual is presented on windows and doors for the housing contractor. In order to understand the role of windows and doors in a house's energy performance, an introduction explains the house as a system of components that can have effects on each other. Further chapters explain in detail the parts of a window, window types and RSI values; window servicing and repair; window replacement; parts of a door, door types and RSI values; door service and repair, including weatherstripping; door replacement; and how to ensure quality, service, and customer satisfaction. A glossary of terms is included. 61 figs., 3 tabs.

  17. EMPLACEMENT DRIFT ISOLATION DOOR CONTROL SYSTEM

    International Nuclear Information System (INIS)

    N.T. Raczka

    1998-01-01

    The purpose of this analysis is to review and refine key design concepts related to the control system presently under consideration for remotely operating the emplacement drift isolation doors at the potential subsurface nuclear waste repository at Yucca Mountain. This analysis will discuss the key design concepts of the control system that may be utilized for remotely monitoring, opening, and closing the emplacement drift isolation doors. The scope and primary objectives of this analysis are to: (1) Discuss the purpose and function of the isolation doors (Presented in Section 7.1). (2) Review the construction of the isolation door and other physical characteristics of the doors that the control system will interface with (Presented in Section 7.2). (3) Discuss monitoring and controlling the operation of the isolation doors with a digital control system (either a Programmable Logic Controller (PLC) system or a Distributed Control System (DCS)) (Presented in Section 7.3). (4) Discuss how all isolation doors can be monitored and controlled from a subsurface central control center (Presented in Section 7.4). This analysis will focus on the development of input/output (I/O) counts including the types of I/O, redundancy and fault tolerance considerations, and processor requirements for the isolation door control system. Attention will be placed on operability, maintainability, and reliability issues for the system operating in the subsurface environment with exposure to high temperatures and radiation

  18. Neurologic Outcome of Laminoplasty for Acute Traumatic Spinal Cord Injury without Instability

    OpenAIRE

    Lee, Hwa Joong; Kim, Hwan Soo; Nam, Kyoung Hyup; Han, In Ho; Cho, Won Ho; Choi, Byung Kwan

    2013-01-01

    Objective The purpose of this study is to evaluate the efficacy of laminoplasty in the treatment of spinal cord injury (SCI) without instability. Methods 79 patients with SCI without instability who underwent surgical treatment in our institute between January 2005 and September 2012 were retrospectively reviewed. Twenty nine patients fulfilled the inclusion criteria as follows: SCI without instability, spinal cord contusion in MRI, cervical stenosis more than 20%, follow up at least 6 months...

  19. Design proposal for door thresholds

    Directory of Open Access Journals (Sweden)

    Smolka Radim

    2017-01-01

    Full Text Available Panels for openings in structures have always been an essential and integral part of buildings. Their importance in terms of a building´s functionality was not recognised. However, the general view on this issue has changed from focusing on big planar segments and critical details to sub-elements of these structures. This does not only focus on the forms of connecting joints but also on the supporting systems that keep the panels in the right position and ensure they function properly. One of the most strained segments is the threshold structure, especially the entrance door threshold structure. It is the part where substantial defects in construction occur in terms of waterproofing, as well as in the static, thermal and technical functions thereof. In conventional buildings, this problem is solved by pulling the floor structure under the entrance door structure and subsequently covering it with waterproofing material. This system cannot work effectively over the long term so local defects occur. A proposal is put forward to solve this problem by installing a sub-threshold door coupler made of composite materials. The coupler is designed so that its variability complies with the required parameters for most door structures on the European market.

  20. Bulkhead Door – Critical Evacuation States

    Directory of Open Access Journals (Sweden)

    Flizikowski Józef

    2017-03-01

    Full Text Available The article is a preliminary to a modification concept of the sliding watertight bulkhead door used on ships and vessels. Hydraulic or electro-hydraulic drives used to move these doors require complicated and extended pressure installations with large amounts of hydraulic fluid. Well-known operational drawbacks of these installations include high level of noise and possibility of various leaks in the hydraulic system. Being the first in a series, the present article describes and analyses critical states which can take place during evacuation of people through openings in the watertight bulkhead doors on seagoing ships and vessels.

  1. Nuclear Storage Overpack Door Actuator and Alignment Apparatus

    International Nuclear Information System (INIS)

    Andreyko, Gregory M.

    2005-01-01

    The invention is a door actuator and alignment apparatus for opening and closing the 15,000-pound horizontally sliding door of a storage overpack. The door actuator includes a ball screw mounted horizontally on a rigid frame including a pair of door panel support rails. An electrically powered ball nut moves along the ball screw. The ball nut rotating device is attached to a carriage. The carriage attachment to the sliding door is horizontally pivoting. Additional alignment features include precision cam followers attached to the rails and rail guides attached to the carriage

  2. Critical element development of double seal door for tritium containment

    International Nuclear Information System (INIS)

    Kanamori, Naokazu; Kakudate, Satoshi; Oka, Kiyoshi; Nakahira, Masataka; Taguchi, Kou; Obara, Kenjiro; Tada, Eisuke; Shibanuma, Kiyoshi; Seki, Masahiro

    1994-08-01

    In fusion experimental reactors, the in-vessel components such as blanket are activated due to D-T operation and they have to be assembled and replaced by remote operation through port penetration of plasma vacuum vessel. A double seal door is inevitably required at an interface between vacuum vessel port and maintenance cask in order to avoid the dispersion of tritium and activated dust during in-vessel component handling. The double seal door should have two open/close doors with four seal surfaces so as to keep leak tightness both of the vacuum vessel and the maintenance cask when doors closed, and to provide access space for handling in-vessel components when doors opened. A prototype compact double seal door with an attractive kinematics of parabolic trajectory has been proposed so as to minimize dead space for the door open/close operation, compared with ordinary slide or hinge type door. Based on this design concept, a sub-scaled model of double seal door with trapezoidal cross-section of around 0.2 m 2 has been fabricated. Through the preliminary experiments such as open/close performance, the double seal door mechanism with parabolic trajectory has been successfully demonstrated. As for leak tightness, seal characteristics of a polyimide ring irradiated up to 10 MGy have been measured. (author)

  3. Development of inverter for elevator door control

    Energy Technology Data Exchange (ETDEWEB)

    Kim, J.K.; Choi, U.D.; Jung, M.K.; Choi, S.K. [HHI R and D Center (Korea, Republic of); Yun, J.H.; Han, S.B. [HELCO R and D Center (Korea, Republic of)

    1995-07-01

    Most of the elevator door controllers have been controlled by DC Motors as an actuator. Recently, The control system using AC induction motor and general purpose inverter has been applied to control of elevator door. But there are some difficulties in making use of this system, such as adjustment of door speed pattern, door open-close time, and security of passenger safety. In order to solve these problems, a special inverter has been developed with an encoder feedback. From the result of field-test, we proved that a special inverter with encoder feedback device has come to considerable effect. Until now about 1,200 sets of these inverters are operated in Korea and about 100 sets are operated in South-east Asia. (author). 3 refs., 10 figs., 3 tabs.

  4. Effect of preservation of the C-6 spinous process and its paraspinal muscular attachment on the prevention of postoperative axial neck pain in C3-6 laminoplasty.

    Science.gov (United States)

    Mori, Eiji; Ueta, Takayoshi; Maeda, Takeshi; Yugué, Itaru; Kawano, Osamu; Shiba, Keiichiro

    2015-03-01

    Axial neck pain after C3-6 laminoplasty has been reported to be significantly lesser than that after C3-7 laminoplasty because of the preservation of the C-7 spinous process and the attachment of nuchal muscles such as the trapezius and rhomboideus minor, which are connected to the scapula. The C-6 spinous process is the second longest spinous process after that of C-7, and it serves as an attachment point for these muscles. The effect of preserving the C-6 spinous process and its muscular attachment, in addition to preservation of the C-7 spinous process, on the prevention of axial neck pain is not well understood. The purpose of the current study was to clarify whether preservation of the paraspinal muscles of the C-6 spinous process reduces postoperative axial neck pain compared to that after using nonpreservation techniques. The authors studied 60 patients who underwent C3-6 double-door laminoplasty for the treatment of cervical spondylotic myelopathy or cervical ossification of the posterior longitudinal ligament; the minimum follow-up period was 1 year. Twenty-five patients underwent a C-6 paraspinal muscle preservation technique, and 35 underwent a C-6 nonpreservation technique. A visual analog scale (VAS) and VAS grading (Grades I-IV) were used to assess axial neck pain 1-3 months after surgery and at the final follow-up examination. Axial neck pain was classified as being 1 of 5 types, and its location was divided into 5 areas. The potential correlation between the C-6/C-7 spinous process length ratio and axial neck pain was examined. The mean VAS scores (± SD) for axial neck pain were comparable between the C6-preservation group and the C6-nonpreservation group in both the early and late postoperative stages (4.1 ± 3.1 vs 4.0 ± 3.2 and 3.8 ± 2.9 vs 3.6 ± 3.0, respectively). The distribution of VAS grades was comparable in the 2 groups in both postoperative stages. Stiffness was the most prevalent complaint in both groups (64.0% and 54

  5. Beoordeling RWA-installatie Atrium Vertigo: Rookverspreiding door het gebouw

    NARCIS (Netherlands)

    Neuhaus, E.

    2004-01-01

    Het atrium van het Vertigo-gebouw is bouwkundig bedoeld als één groot brandcompartiment. De schuifdeuren en ramen naar aanliggende vertrekken staan echter vaak open. Hierdoor kan de rook zich in het geval van een brand in het atrium gemakkelijk door het gebouw verspreiden door een overdruk in het

  6. Close-fitting shield doors with sculptured edges

    International Nuclear Information System (INIS)

    Goodman, L.

    1986-01-01

    The US Department of Energy has contracted with Fluor Technology, Inc. for design and engineering of a facility to begin reprocessing fuel from the reactors at Hanford, Washington. Within the facility, a 15-cm (6-in.)-thick, steel shield door is needed to close an opening 4.3 m (14 ft) high x 8.2 m (27 ft) wide. Two cranes and a centrally located monorail hoist must pass through the opening. The door weighs about 41,000 kg (45 ton), and passage of the hoist will be the most frequent cause for opening the door. These two factors essentially mandated a three-piece door, which allows for using commercially available chain hoists to raise and lower the individual door sections. Normally, there is a 187-Pa (0.75-in. water gauge) pressure differential across the door, and minimal air leakage is essential. Stepped, mating edges between sections and along the adjacent concrete structures are typical with such doors, but so are significant gaps (and air leaks) around the edges. Gaps are needed to preclude frictional jamming between edges as a section is lowered. The challenge was to conceive a method to produce near-zero gaps and preclude jamming without involving impractically tight tolerances. The chosen method was to place trapezoidally shaped, steel gaskets on the door-section edges and on the mating concrete surfaces. The concept is described

  7. Using Face Recognition in the Automatic Door Access Control in a Secured Room

    Directory of Open Access Journals (Sweden)

    Gheorghe Gilca

    2017-06-01

    Full Text Available The aim of this paper is to help users improve the door security of sensitive locations by using face detection and recognition. This paper is comprised mainly of three subsystems: face detection, face recognition and automatic door access control. The door will open automatically for the known person due to the command of the microcontroller.

  8. Diplopie door monovisie

    NARCIS (Netherlands)

    Jorien Schouten; Louise Helmer

    2017-01-01

    Doelstelling: In kaart brengen van de risicofactoren voor het ontwikkelen van binoculaire diplopie na conventionele monovisie door middel van contactlenzen of refractiechirurgie bij presbyopen. Methode: Voor deze literatuurstudie is in maart 2017 gezocht in databanken Pubmed, ScienceDirect en Google

  9. Motor actuated vacuum door. [for photography from sounding rockets

    Science.gov (United States)

    Hanagud, A. V.

    1986-01-01

    Doors that allow scientific instruments to record and retrieve the observed data are often required to be designed and installed as a part of sounding rocket hardware. The motor-actuated vacuum door was designed to maintain a medium vacuum of the order of 0.0001 torr or better while closed, and to provide an opening 15 inches long x 8.5 inches wide while open for cameras to image Halley's comet. When the electric motor receives the instruction to open the door through the payload battery, timer, and relay circuit, the first operation is to unlock the door. After unlatching, the torque transmitted by the motor to the main shaft through the links opens the door. A microswitch actuator, which rides on the linear motion conversion mechanism, is adjusted to trip the limit switch at the end of the travel. The process is repeated in the reverse order to close the door. 'O' rings are designed to maintain the seal. Door mechanisms similar to the one described have flown on Aerobee 17.018 and Black Brant 27.047 payloads.

  10. Door Locking Options in Schools

    Science.gov (United States)

    National Clearinghouse for Educational Facilities, 2009

    2009-01-01

    Doors serve a variety of needs and purposes in schools: (1) Exterior doors provide building security and protection from the elements; and (2) Interior doors control the movement of people among school spaces, help control noise and air flow, and act as flame and smoke barriers during a fire. In a lockdown, they serve as safety barriers. From a…

  11. Hazards in smart grids. Smart meters can open the door to hackers; Gefahren im intelligenten Stromnetz. Smart Meter als Einfallstor fuer Hacker-Angriffe

    Energy Technology Data Exchange (ETDEWEB)

    Gerretz, Dirk [Covisint Emea Compuware GmbH, Neu-Isenburg (Germany)

    2011-10-31

    Smart grid, smart meter, smart home: Increasingly, intelligent technologies are introduced in the energy sector. The merging of power grids and data grids is costly and requires high investments in areas that are far from the key business and key competence of public utilities. Reliable protection of smart meters is a particular challenge as unauthorized access or manipulation may result in great financial and reputational damage. Prior to introducting smart meters, utilities should decide if they want to introduce the necessary safety technologies themselves, including hardware, software, and know-how, or if they want to rely on solutions provided by experienced market partners. They offer open, expandable and scalable platforms for comprehensive identity management and safe data exchange that have been tested in practice in several branches of industry.

  12. Development, Control, and Evaluation of an Actuated Car Door.

    Science.gov (United States)

    Strolz, M; Mortl, A; Graf, M; Buss, M

    2009-01-01

    Actuated car doors are a promising way to increase the convenience of access to cars. We propose an advanced actuation and control concept which can easily be integrated into conventional car doors. By utilizing a linear, nonbackdrivable actuator and various sensors, both automatic and manual door operations are enabled. A discrete state controller ensures a safe operation of the door, including automatic opening and closing. The realization of a supportive, high-quality haptic interaction with the car door for the manual operation is the principal part of our work. Due to the impracticality of a direct measurement of the user interaction force at a car door, we chose impedance control to render the desired dynamics. The impedance was designed to provide a convenient, intuitive, and safe manual handling of the door. We implemented and tested four different impedance control schemes, of which impedance control with actuator force feedback performed best. Two experimental evaluations with 16 and 27 participants revealed a predominant approval of the actuated car door.

  13. Door valve for fuel handling path

    International Nuclear Information System (INIS)

    Makishima, Katsuhiko.

    1969-01-01

    A door valve is provided which seals cover gas from a liquid metal cooled reactor without leakage therefrom. A threaded shaft is screwed into a heavy box press which is packed with lead. The shaft is adapted to be rotated by an electric motor or a manually operated wheel which is disposed outside of the door valve. From the box press a valve plate is suspended by four linkage bars, one for each corner. Each linkage bar is provided with two wheels which are respectively mounted at the connections with the box press and the valve plate. The wheels are carried on the horizontal grooves formed in a door valve casing. In operation the shaft rotates and travels to permit the box press and the valve plate to move into the door valve casing while the valve plate does not contact the casing. When the box press reaches the home position, the wheels drop into the recesses which are disposed at the ends of the grooves, the valve plate is carried on the valve opening, and the box press presses the valve plate to increase the tightness. The valve plate does not suffer wear as it does not over other parts. (Yamaguchi, T.)

  14. Landing Gear Door Liners for Airframe Noise Reduction

    Science.gov (United States)

    Jones, Michael G. (Inventor); Howerton, Brian M. (Inventor); Van De Ven, Thomas (Inventor)

    2014-01-01

    A landing gear door for retractable landing gear of aircraft includes an acoustic liner. The acoustic liner includes one or more internal cavities or chambers having one or more openings that inhibit the generation of sound at the surface and/or absorb sound generated during operation of the aircraft. The landing gear door may include a plurality of internal chambers having different geometries to thereby absorb broadband noise.

  15. The Globe reopens its doors

    CERN Multimedia

    CERN Bulletin

    2016-01-01

    After a year of work, the newly renovated Globe of Science and Innovation will open its doors again at 10 a.m. on Tuesday, 19 April. The “Universe of Particles” exhibition has been updated and will be open to the public, free of charge, from 10 a.m. to 5 p.m., Monday to Saturday (except during official CERN closures). The Globe’s programme of lectures and events for the general public will restart at the end of April. What’s on at the Globe in April and May: - 28 April at 6.30 p.m.: Theatre – “Curie_Meitner_Lamarr_indivisible”, a play that pays tribute to the lives of three exceptional women in the field of science and technology (in English). Reservations: http://indico.cern.ch/e/cmli - 10 May at 8.30 p.m.: Lecture – “Le modèle du CERN et les grands défis mondiaux” (“The CERN model and the key global challenges”) by Michel Spiro (in French with simultaneous ...

  16. Cervical Laminoplasty

    Science.gov (United States)

    ... Nerve Tests: EMG, NCV and SEEP Alternative Medicine Acupuncture Herbal Supplements Surgical Options Anterior Cervical Fusion Artifical ... tasks. A NASS physician can perform a thorough history to evaluate your symptoms and any recent changes. ...

  17. Particulate matter (PM 2.5 levels in ETS emissions of a Marlboro Red cigarette in comparison to the 3R4F reference cigarette under open- and closed-door condition

    Directory of Open Access Journals (Sweden)

    Mueller Daniel

    2012-06-01

    Full Text Available Abstract Introduction Potential health damage by environmental emission of tobacco smoke (environmental tobacco smoke, ETS has been demonstrated convincingly in numerous studies. People, especially children, are still exposed to ETS in the small space of private cars. Although major amounts of toxic compounds from ETS are likely transported into the distal lung via particulate matter (PM, few studies have quantified the amount of PM in ETS. Study aim The aim of this study was to determine the ETS-dependent concentration of PM from both a 3R4F reference cigarette (RC as well as a Marlboro Red brand cigarette (MRC in a small enclosed space under different conditions of ventilation to model car exposure. Method In order to create ETS reproducibly, an emitter (ETSE was constructed and mounted on to an outdoor telephone booth with an inner volume of 1.75 m3. Cigarettes were smoked under open- and closed-door condition to imitate different ventilation scenarios. PM2.5 concentration was quantified by a laser aerosol spectrometer (Grimm; Model 1.109, and data were adjusted for baseline values. Simultaneously indoor and outdoor climate parameters were recorded. The time of smoking was divided into the ETS generation phase (subset “emission” and a declining phase of PM concentration (subset “elimination”; measurement was terminated after 10 min. For all three time periods the average concentration of PM2.5 (Cmean-PM2.5 and the area under the PM2.5 concentration curve (AUC-PM2.5 was calculated. The maximum concentration (Cmax-PM2.5 was taken from the total interval. Results For both cigarette types open-door ventilation reduced the AUC-PM2.5 (RC: from 59 400 ± 14 600 to 5 550 ± 3 900 μg*sec/m3; MRC: from 86 500 ± 32 000 to 7 300 ± 2 400 μg*sec/m3; p mean-PM2.5 (RC: from 600 ± 150 to 56 ± 40 μg/m3, MRC from 870 ± 320 to 75 ± 25 μg/m3; p max-PM2.5 was reduced by about 80% (RC: from 1 050 ± 230 to

  18. Opening the Door to Coaching Conversations

    Science.gov (United States)

    Cheliotes, Linda Gross; Reilly, Marceta Fleming

    2012-01-01

    A leader doesn't have to solve every problem personally to be effective. In fact, helping others learn to resolve issues and implement their own solutions is the key to sustainable leadership and an empowered staff. This companion and follow-up book to "Coaching Conversations" brings the coaching style of leadership to life with stories from the…

  19. Opening the door to nuclear development

    International Nuclear Information System (INIS)

    Sethna, H.N.

    1985-01-01

    The author discusses how the Atoms for Peace speech heralded the birth of an era of cooperation between the sovereign nations of the world in the peaceful uses of atomic energy for the benefit of all mankind. He explains how India imported the technology it needed to implement its own nuclear power program. India not only assimilated this imported technology completely, but also adapted it to its own conditions and requirements. Action was also taken to diversify, improve and scale up the technology so as to be independent of further imports. The author says that the initial cooperation agreement made by Eisenhower has been the bedrock on which India's nuclear program has been built

  20. "Abriendo Puertas" (Opening Doors) through Writing

    Science.gov (United States)

    Sarmiento, Lilia E.; Vasquez, Sergio A.

    2010-01-01

    A Latina college professor describes the family history-writing project she uses in her reading/language arts teacher preparation course. The project provides opportunities for Spanish bilingual teacher candidates to gain greater understanding of their cultural selves and to consider ways to successfully deploy that new insight as teachers in…

  1. Educational Authority in the ''Open Door'' Marketplace

    Science.gov (United States)

    Deterding, Nicole M.; Pedulla, David S.

    2016-01-01

    In recent years, private for-profit education has been the fastest growing segment of the U.S. postsecondary system. Traditional hiring models suggest that employers clearly and efficiently evaluate college credentials, but this changing institutional landscape raises an important question: How do employers assess credentials from emerging…

  2. Opening doors to knowledge in Bhutan.

    Science.gov (United States)

    1994-01-01

    School girls, teachers, and health school students were surveyed, using 3 different questionnaires, in January 1993. Catherine Payne, former research associate of the Family Planning Council of Southeastern Pennsylvania, visited Bhutan from August 18 through September 4, 1993, to assist with the interpretation of results and to interview teachers in schools where the new curriculum would be introduced and officials who were writing it. Results were released in October 1993. 160 young women (10-20 years of age) from 5 schools were surveyed and another 60 were interviewed by Payne. 25% of the surveyed girls understood the connection between menstruation and reproduction. Of those who had heard of menstruation, 60% had heard about it from their friends; 30%, from siblings; 27%, from mothers; and 10%, from schools. Teachers in the survey were supportive of the study and recognized the importance of reproductive health education. Also, officials of the education and health ministries, epidemiologists, experts in information, education, and communication (IEC), and district health officers attended a 2-day workshop directed at local data collection and analysis of this type. Although teenage pregnancy and sexually transmitted diseases (STDs) are increasing in Bhutan, family planning services are not reaching youth, particularly those who do not attend school or do not have children. Hospitals provide contraceptives mainly to those over 21, and outreach clinics are not catering to the family planning needs of minors. One of the recommendations of this survey/workshop was to provide correct information on reproductive health to youth.

  3. Minority Outlook: Opening the Door in Biomedicine.

    Science.gov (United States)

    Freiherr, Gregory

    1979-01-01

    The national Minority Biomedical Support (MBS) Program, established in 1972 with National Institutes of Health funds, is described with emphasis on its role in increasing minority representation in biomedical research. (LBH)

  4. Knocking on a wide open door

    DEFF Research Database (Denmark)

    Kragelund, Peter

    2009-01-01

    The current strong foothold of Chinese enterprises on the African continent concerns many western observers. They fear that the West will lose leverage in Africa and simultaneously postpone development. Paradoxically, the advance of Chinese enterprises in Africa is not only the result of delibera...

  5. Opening the Door on Triangular Numbers

    Science.gov (United States)

    McMartin, Kimberley; McMaster, Heather

    2016-01-01

    As an alternative to looking solely at linear functions, a three-lesson learning progression developed for Year 6 students that incorporates triangular numbers to develop children's algebraic thinking is described and evaluated.

  6. Opening Doors to Teaching: Understanding the Profession

    Science.gov (United States)

    Langner, Jonas; Zhok, Andrea

    2016-01-01

    Teaching, together with translating, is probably one of the employment options most closely associated with a Modern Foreign Languages degree, or at least one where the language skills acquired are an intrinsic part of the profession in question. Yet, British undergraduate language degree programmes do not systematically offer students…

  7. Electricity supply opportunities -- The Mexican door opens

    International Nuclear Information System (INIS)

    Holland, H.W.

    1993-01-01

    Anyone who assumes that the Mexican market for electrical capacity is just a matter of selling equipment and services is in for a shock. The astute neighbor to the south is exploring privatization in the power sector with a style and flair that is uniquely Mexican. While free market-market forces have, to some extent, already transformed the manner in which new generating capacity is added in the US, a Mexico equivalent will not develop over night. Mexico is no place for the faint of heart. You have to play hard in order to win against competition almost equivalent to that of the US market and have the staying power to be around long enough to reap the rewards. This work presents the author's views concerning the manner in which competition has been introduced within the electricity supply market of the neighbor to the south

  8. Door Hardware and Installations; Carpentry: 901894.

    Science.gov (United States)

    Dade County Public Schools, Miami, FL.

    The curriculum guide outlines a course designed to provide instruction in the selection, preparation, and installation of hardware for door assemblies. The course is divided into five blocks of instruction (introduction to doors and hardware, door hardware, exterior doors and jambs, interior doors and jambs, and a quinmester post-test) totaling…

  9. Neurologic Outcome of Laminoplasty for Acute Traumatic Spinal Cord Injury without Instability.

    Science.gov (United States)

    Lee, Hwa Joong; Kim, Hwan Soo; Nam, Kyoung Hyup; Han, In Ho; Cho, Won Ho; Choi, Byung Kwan

    2013-09-01

    The purpose of this study is to evaluate the efficacy of laminoplasty in the treatment of spinal cord injury (SCI) without instability. 79 patients with SCI without instability who underwent surgical treatment in our institute between January 2005 and September 2012 were retrospectively reviewed. Twenty nine patients fulfilled the inclusion criteria as follows: SCI without instability, spinal cord contusion in MRI, cervical stenosis more than 20%, follow up at least 6 months. Preoperative neurological state, clinical outcome and neurological function was measured using the American Spinal Injury Association (ASIA) impairment scale, modified Japanese Orthopedic Association (mJOA) grading scale and Hirabayashi recovering rate. Seventeen patients showed improvement in ASIA grade and twenty six patients showed improvement in mJOA scale at 6 month follow up. However, all patients with ASIA grade B and C have shown improvement of one or more ASIA grade. Mean Hirabayashi recovery rate was 47.4±23.7%. There was better neurologic recovery in those who had cervical spondylosis without ossification of posterior longitudinal ligament (OPLL) (pcervical canal stenosis, especially spondylosis without OPLL and neurologic deterioration in ASIA B, C and D.

  10. Boomerang deformity of cervical spinal cord migrating between split laminae after laminoplasty.

    Science.gov (United States)

    Kimura, S; Gomibuchi, F; Shimoda, H; Ikezawa, Y; Segawa, H; Kaneko, F; Uchiyama, S; Homma, T

    2000-04-01

    Patients with cervical compression myelopathy were studied to elucidate the mechanism underlying boomerang deformity, which results from the migration of the cervical spinal cord between split laminae after laminoplasty with median splitting of the spinous processes (boomerang sign). Thirty-nine cases, comprising 25 patients with cervical spondylotic myelopathy, 8 patients with ossification of the posterior longitudinal ligament, and 6 patients with cervical disc herniation with developmental canal stenosis, were examined. The clinical and radiological findings were retrospectively compared between patients with (B group, 8 cases) and without (C group, 31 cases) boomerang sign. Moderate increase of the grade of this deformity resulted in no clinical recovery, although there was no difference in clinical recovery between the two groups. Most boomerang signs developed at the C4/5 and/or C5/6 level, where maximal posterior movement of the spinal cord was achieved. Widths between lateral hinges and between split laminae in the B group were smaller than in the C group. Flatness of the spinal cord in the B group was more severe than in the C group. In conclusion, the boomerang sign was caused by posterior movement of the spinal cord, narrower enlargement of the spinal canal and flatness of the spinal cord.

  11. Design of mulitlevel OLF approach ("V"-shaped decompressive laminoplasty) based on 3D printing technology.

    Science.gov (United States)

    Ling, Qinjie; He, Erxing; Ouyang, Hanbin; Guo, Jing; Yin, Zhixun; Huang, Wenhua

    2017-07-27

    To introduce a new surgical approach to the multilevel ossification of the ligamentum flavum (OLF) aided by three-dimensional (3D) printing technology. A multilevel OLF patient (male, 66 years) was scanned using computed tomography (CT). His saved DICOM format data were inputted to the Mimics14.0 3D reconstruction software (Materialise, Belgium). The resulting 3D model was used to observe the anatomical features of the multilevel OLF area and to design the surgical approach. At the base of the spinous process, two channels were created using an osteotomy bilaterally to create a "V" shape to remove the bone ligamentous complex (BLC). The decompressive laminoplasty using mini-plate fixation was simulated with the computer. The physical model was manufactured using 3D printing technology. The patient was subsequently treated using the designed surgery. The operation was completed successfully without any complications. The operative time was 90 min, and blood loss was 200 ml. One month after the operation, neurologic function was recovered well, and the JOA score was improved from 6 preoperatively to 10. Postoperative CT scanning showed that the OLF was totally removed, and the replanted BLC had not subsided. 3D printing technology is an effective, reliable, and minimally invasive method to design operations. The technique can be an option for multilevel OLF surgical treatment. This can provide sufficient decompression with minimum damage to the spine and other intact anatomical structures.

  12. Modeling and Simulation of Two Wheelchair Accessories for Pushing Doors.

    Science.gov (United States)

    Abdullah, Soran Jalal; Shaikh Mohammed, Javeed

    2017-03-27

    Independent mobility is vital to individuals of all ages, and wheelchairs have proven to be great personal mobility devices. The tasks of opening and navigating through a door are trivial for healthy people, while the same tasks could be difficult for some wheelchair users. A wide range of intelligent wheelchair controllers and systems, robotic arms, or manipulator attachments integrated with wheelchairs have been developed for various applications, including manipulating door knobs. Unfortunately, the intelligent wheelchairs and robotic attachments are not widely available as commercial products. Therefore, the current manuscript presents the modeling and simulation of a novel but simple technology in the form of a passive wheelchair accessory (straight, arm-like with a single wheel, and arc-shaped with multiple wheels) for pushing doors open from a wheelchair. From the simulations using different wheel shapes and sizes, it was found that the arc-shaped accessory could push open the doors faster and with almost half the required force as compared to the arm-like accessory. Also, smaller spherical wheels were found to be best in terms of reaction forces on the wheels. Prototypes based on the arc-shaped accessory design will be manufactured and evaluated for pushing doors open and dodging or gliding other obstacles.

  13. Neck Pain Following Cervical Laminoplasty: Does Preservation of the C2 Muscle Attachments and/or C7 Matter?

    Science.gov (United States)

    Riew, K. Daniel; Raich, Annie L.; Dettori, Joseph R.; Heller, John G.

    2013-01-01

    Study Design Systematic review. Objective In patients aged 18 years or older, with cervical spondylotic myelopathy or ossification of the posterior longitudinal ligament (OPLL), does sparing the C2 muscle attachments and/or C7-preserving cervical laminoplasty lead to reduced postoperative axial pain compared with conventional C3 to C7 laminoplasty? Do these results vary based on early active postoperative cervical motion? Methods A systematic review of the English-language literature was undertaken for articles published between 1970 and August 17, 2012. Electronic databases and reference lists of key articles were searched to identify studies evaluating C2/C3- or C7-preserving cervical laminoplasty for the treatment of cervical spondylotic myelopathy (CSM) or OPLL in adults. Studies involving traumatic onset, cervical fracture, infection, deformity, or neoplasms were excluded, as were noncomparative studies. Two independent reviewers assessed the level of evidence quality using the grading of recommendations assessment, development and evaluation (GRADE) system, and disagreements were resolved by consensus. Results We identified 11 articles meeting our inclusion criteria. Only the randomized controlled trial (RCT) showed no significant difference in late axial pain (at 12 months) when C7 spinous muscle preservation was compared with no preservation. However, seven other retrospective cohort studies showed significant pain relief in the preserved group compared with the nonpreserved group. The preservation group included those with preservation of the C7 spinous process and/or attached muscles, the deep extensor muscles, or C2 muscle attachment and/or C3 laminectomy (as opposed to laminoplasty). One study that included preservation of either the C2 or C7 posterior paraspinal muscles found that only preservation of the muscles attached to C2 resulted in reduced postoperative pain. Another study that included preservation of either the C7 spinous process or

  14. Door valve for fuel handling path

    International Nuclear Information System (INIS)

    Makishima, Katsuhiko.

    1969-01-01

    A door valve is provided which seals cover gas from a liquid metal cooled reactor without leakage therefrom. A threaded shaft is screwed into a heavy box press which is packed with lead. The shaft is adapted to be rotated by an electric motor or a manually operated wheel which is disposed outside of the door valve. A valve plate is suspended from the box press by four guide wheels mounted thereon. The guide wheels are fitted into inclined guide grooves formed at the valve plate and into grooved formed in the inner wall of a valve casing. A locking ball is provided at each side of the valve plate. In operation the shaft rotates and travels to permit the box press and the valve plate to move into the door valve casing, thus releasing the locking balls. The valve plate does not contact the bottom of the casing. When the box press reaches the home position, the valve plate is carried on the valve opening, and the box press presses the valve plate to increase the tightness. The valve plate does not suffer wear as it does not slide over other parts. (Yamaguchi, T.)

  15. Evaluation of neck pain by using a visual analog scale before and after laminoplasty in patients with cervical myelopathy: relationship with clinical results.

    Science.gov (United States)

    Ara, Tsuyoshi; Iizuka, Haku; Sorimachi, Yasunori; Iizuka, Yoichi; Nakajima, Takashi; Nishinome, Masahiro; Tsutsumi, Satoshi; Takagishi, Kenji

    2010-06-01

    In this study the authors investigated the neck pain of patients with cervical myelopathy by using a visual analog scale (VAS) before and after laminoplasty, and they analyzed the association of amount of neck pain with the clinical results. A retrospective review was conducted in 41 patients with cervical myelopathy who underwent cervical laminoplasty. The patients were assessed using questionnaires to evaluate the neck pain intensity before surgery, and 2 years after surgery, the outcome was assessed using a VAS. The degree of cervical lordosis and range of motion (ROM) of the cervical spine were evaluated before and after laminoplasty. The neurological status was also evaluated before and after surgery. The patients were classified into 2 groups according to their preoperative neck pain: 1) the pain (PA) group, which included patients whose preoperative VAS score was more than 1 mm; and 2) the no pain (NP) group, which included patients whose preoperative VAS score was 0 mm. Inclusion in the PA group indicated a restriction of the cervical ROM before laminoplasty; however, the improvement of neck pain in this group and the deterioration of pain status in the NP group eliminated this difference after laminoplasty. Thereafter, the PA group was classified into 2 subgroups according to the improvement of the preoperative neck pain: 1) the improved group, which included patients whose postoperative VAS score decreased; and 2) the no improvement group, which included patients who were not in the improved group. No significant differences were observed in the average recovery and radiographic results between these 2 subgroups. Neck pain before surgery in the PA group indicated a restriction of the cervical ROM; however, the improvement of neck pain in this group and the deterioration of pain status in the NP group indicated the disappearance of this difference postoperatively. Moreover, improvement of preoperative neck pain was not associated with the radiographic

  16. Sweet Spots and Door Stops

    Science.gov (United States)

    Thompson, Michael; Tsui, Stella; Leung, Chi Fan

    2011-01-01

    A sweet spot is referred to in sport as the perfect place to strike a ball with a racquet or bat. It is the point of contact between bat and ball where maximum results can be produced with minimal effort from the hand of the player. Similar physics can be applied to the less inspiring examples of door stops; the perfect position of a door stop is…

  17. A Door-to-Door Combined Transport Planner

    DEFF Research Database (Denmark)

    Aastrup, Jesper; Jespersen, Per Homann; Pedersen, Michael B.

    2004-01-01

    Establishing a web-based portal functioning as a one-stop-shop for transport buyers is a radical idea of a consumer oriented intermodal freight system. This utopian vision will be materialized in a system description and a prototype of a Door-to-Door Combined Trans-port Planner (COTRAP), developed......- and inter-organizational barriers to the establishment of a competitive and effective combined transport system with rail freight operators as the intermodal integrator. In this paper we describes the ideas and methodology behind the project, as well as some preliminary results....

  18. Koperemissies door drinkwaterleidingen (herziene editie)

    NARCIS (Netherlands)

    Verweij W; Mons MN; Aalbers JEM; Cruchten RGH van; LWD

    1996-01-01

    Ge-inventariseerd werd wat er bekend is over de fluxen van koper door (corrosie van) waterleidingen naar rioolwaterzuiveringsinstallaties (rwzi's), rwzi-slib en het oppervlaktewater. Gebleken is dat in 1993 (landelijk gemiddeld) 57% van de koperbelasting van rwzi's afkomstig is van

  19. News Teaching Support: New schools network launched Competition: Observatory throws open doors to a select few Festival: Granada to host 10th Ciencia en Acción Centenary: Science Museum celebrates 100 years Award: Queen's birthday honour for science communicator Teacher Training: Training goes where it's needed Conference: Physics gets creative in Christchurch Conference: Conference is packed with ideas Poster Campaign: Bus passengers learn about universe Forthcoming events

    Science.gov (United States)

    2009-09-01

    Teaching Support: New schools network launched Competition: Observatory throws open doors to a select few Festival: Granada to host 10th Ciencia en Acción Centenary: Science Museum celebrates 100 years Award: Queen's birthday honour for science communicator Teacher Training: Training goes where it's needed Conference: Physics gets creative in Christchurch Conference: Conference is packed with ideas Poster Campaign: Bus passengers learn about universe Forthcoming events

  20. [When doors slam, fingers jam!].

    Science.gov (United States)

    Claudet, I; Toubal, K; Carnet, C; Rekhroukh, H; Zelmat, B; Debuisson, C; Cahuzac, J-P

    2007-08-01

    Epidemiological analysis in a universitary paediatric emergency unit of children admitted after accidental injuries resulting from fingers crushed in a door. Prospective, descriptive cohort study from September 6th, 2004 to July 1st, 2005 included all children admitted for finger injuries crushed in a non-automatic door. included accidents due to automatic doors, toy's or refrigerator doors, families who refused to participate to the study or families who had left the waiting area before medical examination. Collected data were patient and family characteristics, accident characteristics and its management. Three hundred and forty children affected by 427 digital lesions were included. The mean age was 5.5+/-3.8 years (range 4 months - 15.5 years). Male/female ratio was equal to 1.2: 1. Fifty-eight percent of patients belonged to families composed of 3 or more siblings. Ninety-three per cent of families came to hospital within the first 2 hours after the accident (mean delay 99+/-162 min, median range 54 minutes). Location of the accident was: domestic (62%, at home (64%)), at school (17%). Locations within the home were: the bedroom (33%), bathroom and toilets (21%). An adult was present in 75% of cases and responsible for the trauma in 25% of accidents, another child in 44%. The finger or fingers were trapped on the hinge side in 57% of patients. No specific safeguard devices were used by 94% of families. Among victims, 20% had several crushed digits; left and right hand were injured with an equal frequency. The commonest involved digits were: the middle finger (29%), the ring finger (23%). The nail plate was damaged in 60% of digital lesions, associated with a wound (50%), a distal phalanx fracture (P3) (12%). Six children had a partial or complete amputation of P3, 2 children a lesion of the extensor tendon, 1 child had a rupture of the external lateral ligament. Three percent of children required an admission to the paediatric orthopaedic surgery unit. Post

  1. Locked doors in acute inpatient psychiatry: a literature review.

    Science.gov (United States)

    van der Merwe, M; Bowers, L; Jones, J; Simpson, A; Haglund, K

    2009-04-01

    Many acute inpatient psychiatric wards in the UK are permanently locked, although this is contrary to the current Mental Health Act Code of Practice. To conduct a literature review of empirical articles concerning locked doors in acute psychiatric inpatient wards, an extensive literature search was performed in SAGE Journals Online, EBM Reviews, British Nursing Index, CINAHL, EMBASE Psychiatry, International Bibliography of the Social Sciences, Ovid MEDLINE, PsycINFO and Google, using the search terms 'open$', 'close$', '$lock$', 'door', 'ward', 'hospital', 'psychiatr', 'mental health', 'inpatient' and 'asylum'. A total of 11 empirical papers were included in the review. Both staff and patients reported advantages (e.g. preventing illegal substances from entering the ward and preventing patients from absconding and harming themselves or others) and disadvantages (e.g. making patients feel depressed, confined and creating extra work for staff) regarding locked doors. Locked wards were associated with increased patient aggression, poorer satisfaction with treatment and more severe symptoms. The limited literature available showed the urgent need for research to determine the real effects of locked doors in inpatient psychiatry.

  2. Design And Implementation Of A Door Locking System Using Android App

    Directory of Open Access Journals (Sweden)

    Agbo David O.

    2017-08-01

    Full Text Available The Android Operating System finds wide use in smart phones and tablets and is thus suitable for home controllers. This project presents a smart home controller that uses the Bluetooth in an Android device to control the operation of an automated security door system. The software was designed using an Android app that generates a password that is recognized by the Bluetooth to control the opening and closing of the door located at some distance from the user. The Bluetooth module that is installed on the door receives the commands from the android phone and passes these commands to the microcontroller that controls the opening and closing of the door. The design was simulated in Proteus integrated development environment after which the hardware was built on experimental boards. The performance of the system agrees excellently with its conception. The system can be used in various situations where access to an enclosure need to be secured

  3. Design of the shield door and transporter for the Culham Conceptual Tokamak Reactor Mark II

    International Nuclear Information System (INIS)

    Guthrie, J.A.S.

    1980-04-01

    In the Culham Conceptual Tokamak Reactor MK II access to the interior for blanket maintenance is through large openings in the fixed shield structure closed by removable shield doors when the reactor is operational. This report describes the design of the 200 tonne doors and the associated special-purpose remote operating transporter manipulator. The design, which has not been optimised, generally uses available commercial equipment and state-of-the-art techniques. (U.K.)

  4. Scott Brothers Windows and Doors Information Sheet

    Science.gov (United States)

    Scott Brothers Windows and Doors (the Company) is located in Bridgeville, Pennsylvania. The settlement involves renovation activities conducted at property constructed prior to 1978, located in Pittsburgh, Pennsylvania.

  5. Holiday Door Decorating Contest Brings Cheer | Poster

    Science.gov (United States)

    By Carolynne Keenan, Contributing Writer Other than the time of year, what do the following have in common: the leg lamp from the movie “A Christmas Story,” a compilation of silly holiday jokes, a gingerbread house, and Santa on a motorcycle? All four were among the individual door winners for the Holiday Door Decorating Contest, held at NCI at Frederick in December. Employees dressed up their office doors, hallways, and even stairwells to participate. Entries for the contest included individual office doors as well as groups. Some employees even “decked the halls” of whole office buildings to participate.

  6. Laminoplasty Does not Lead to Worsening Axial Neck Pain in the Properly Selected Patient With Cervical Myelopathy: A Comparison With Laminectomy and Fusion.

    Science.gov (United States)

    Stephens, Byron F; Rhee, John M; Neustein, Thomas M; Arceo, Rafael

    2017-12-15

    Retrospective cohort study of prospectively collected data. To determine if laminoplasty (LP) is associated with worsening axial neck pain in patients with multilevel cervical myelopathy, and to compare neck pain, clinical outcomes, and radiographic measures in a group undergoing laminectomy and fusion (LF). Postoperative new or worsening axial neck pain is commonly cited as a major disadvantage of laminoplasty. However, there remains a paucity of corroborative data from large series. Following institutional review board approval, we reviewed the medical records, radiographs, and prospective clinical outcomes database of 85 patients undergoing LP and 52 patients undergoing LF for cervical myelopathy with minimum 1-year radiographic follow-up and average clinical follow-up of 18.5 months. LP was performed in those with neutral to lordotic C2-7 alignment and who did not complain of diffuse axial pain. Otherwise, LF was performed. Clinical outcomes included visual analogue score (VAS)-neck pain, VAS-total pain, neck disability index (NDI), short form 36, modified Japanese Orthopaedic Association (mJOA), and several radiographic parameters. VAS-neck did not worsen in LP (-0.2, P = 0.54) and did improve in LF (-2.0, P = 0.0013). VAS-total improved significantly in both groups (LF -1.04 ± 0.52, P = 0.05; LP -1.4 ± 0.51, P = 0.008). NDI improved in both groups, but was significant in only LP (LP decreased 6.79 ± 2.25, P = 0.0032; LF decreased 4.01 ± 3.05, P = 0.19). mJOA scores improved significantly in both groups (LP improved 2.89 ± 0.27, P cervical lordosis in both groups that was significant in LP (LP 2.92° loss, P = 0.0181; LF 1.25° loss, P = 0.53). In a carefully selected group of myelopathic patients without significant diffuse axial pain preoperatively and appropriate sagittal alignment, laminoplasty did not lead to worsening axial neck pain, and it was associated with significant improvements in other

  7. Extensivering van de begeleiding door het inzetten van peer- en self-assessment in IMTO

    NARCIS (Netherlands)

    Joosten-ten Brinke, Desirée

    2011-01-01

    Joosten-ten Brinke, D. (2011). Extensivering van de begeleiding door het inzetten van peer- en self-Assessment in IMTO. In E. Bakker, W. Giesbertz, J. von Grumbkow, & T. Houtmans (Red.), Ontwikkeling van de onderzoekscompetentie aan de Open Universiteit (pp. 121-128). Heerlen: Open universiteit.

  8. Investigation into the acceptability of door locking to staff, patients, and visitors on acute psychiatric wards.

    Science.gov (United States)

    Muir-Cochrane, Eimear; van der Merwe, Marie; Nijman, Henk; Haglund, Kristina; Simpson, Alan; Bowers, Len

    2012-02-01

    There is disagreement among psychiatric professionals about whether the doors of acute psychiatric wards should be kept locked to prevent patients from leaving and harming themselves or others. This study explored patient, staff, and visitor perceptions about the acceptability of locking the ward door on acute psychiatric inpatient wards. Interviews were conducted with 14 registered nurses, 15 patients, and six visitors from three different acute wards. Findings revealed commonalities across all groups, with general agreement that locking the door reduced absconding. Staff expressed feelings of guilt, embarrassment, and fear of being blamed when a patient absconded. Staff also reported that open wards created anxious vigilance to prevent an abscond and increased workload in allocating staff to watch the door, whereas staff on partially-locked doors also perceived an increased workload in letting people in and out of the ward. Patients had mixed feelings about the status of the door, expressing depression, a sense of stigma, and low self-esteem when the door was locked. The issue of balancing safety and security on acute psychiatric wards against the autonomy of patients is not easily resolved, and requires focused research to develop innovative nursing practices. © 2011 The Authors. International Journal of Mental Health Nursing © 2011 Australian College of Mental Health Nurses Inc.

  9. 29 CFR 1917.114 - Cargo doors.

    Science.gov (United States)

    2010-07-01

    ... counterweights shall be guarded. (2) Lift trucks and cranes shall not be used to move mechanically operated doors.... (1) The door shall be connected to its lifting tackle with shackles or equally secure means. (2) Lifting bridles and tackles shall have a safety factor of five, based upon maximum anticipated static...

  10. The Ins and Outs of Modern Doors.

    Science.gov (United States)

    College Planning & Management, 1999

    1999-01-01

    Discusses the qualities and trends in modern metal doors for educational facilities that include fire protection and sound-control attributes. Important differences in door manufacturing methods and materials are addressed and sound-transmission class values, ratings, and rating descriptions are listed. (GR)

  11. A Foot Operated Timeout Room Door Latch.

    Science.gov (United States)

    Foxx, R. M.; And Others

    1982-01-01

    This report describes the design and implementation of a foot operated timeout room door latch that permits staff members to maintain a misbehaving retarded individual in timeout without locking the door. Use of the latch also frees the staff member involved to record behavioral observations or reinforce appropriate behavior. (Author)

  12. Taksterfte in Buxus, veroorzaakt door Cylindrocladium buxicola

    NARCIS (Netherlands)

    Kuik, van A.J.; Dalfsen, van P.

    2010-01-01

    De laatste jaren wordt de Buxusteelt geplaagd door een ziekte die veroorzaakt wordt door de schimmel Cylindrocladium buxicola. Gezien de snelle uitbreiding van de ziekte is het voor kwekers en afnemers van Buxus van groot belang dat deze problematiek wordt aangepakt. Daar om is begin 2006 in

  13. Bunker door interlock limit issues of K-130 cyclotron, VECC

    International Nuclear Information System (INIS)

    Srihari, K.; Ravishankar, R.; Mitra, M.S.; Mishra, S.K.; Bandyopadhyay, T.; Sarkar, P.K.

    2011-01-01

    The K-130 cyclotron is in operation at VECC, Kolkata. Recently modernization of the cyclotron has taken place. Central region modification has increased reasonable internal beam current. During the tuning of the projectiles, loss of beam is unavoidable and projectiles hitting different parts of the machine inside the vacuum chamber . These interactions produce prompt radiation comprising neutron and gamma. However machine bunker is not accessible during the operation of the machine. The induced activity produced because of interactions of the primary and secondary radiation a radiation hazardous environment during the shut down for the related maintenance work. Area radiation monitors placed at machine bunker room have the interlock with massive shield door of the bunker. Area radiation monitors are set to specified limiting value, lower than that will allow to open the shield door in normal condition. As, the internal beam current being increased and the probability of beam spread being more. Consequently generation of induced activity is also high leading to delay in machine bunker door opening because of the interlock settings. Radiation dose mapping after a long operation of the machine was done for the different strategic points (The locations mainly people access immediate after shut down). Different consequences and remedial measures being presented in paper to raise the dose rate limit level for the interlocks between the area radiation monitors with machine bunker door, keeping in mind of the regulatory requirements. Raising the limit of dose rate limiting value will minimize the waiting time to access the machine bunker which will increase the duty factor of the machine. (author)

  14. An unexpected knock on Corrigan's secret door.

    Science.gov (United States)

    Woywodt, Alexander

    2010-10-01

    Corrigan's secret door describes a metaphorical escape route for busy physicians. The term was derived from the successful and exceptionally busy professional life of Irish physician Dominic John Corrigan (1802-80). It is claimed that Corrigan's outpatient clinic was so busy that he required a secret door in his consulting rooms to escape from the ever-growing queue of eager patients. The origins of this charming story are unknown, and the door may have never existed. However, at present, Corrigan's secret door is often quoted when busy physicians have their own little ways in surviving a stressful professional life. Generations of British-trained doctors have grown up with Corrigan's secret door, as it was featured in the introduction of the Oxford Handbook of Clinical Medicine. Accordingly, trainees as well as more senior doctors are often reminded that having a 'secret door' is vital in surviving in the medical profession. My own escape is through classical music and the violoncello, in particular. As the name implies, my own secret door is normally invisible to colleagues and patients. This little article is about a patient who found me out, and a reflection on the role of classical music and the cello in my professional life.

  15. The Open Access Dilemma

    Science.gov (United States)

    Pratt, Timothy

    2017-01-01

    Community colleges, with their commitment to open access, admit millions of students each year who are unprepared for college-level work, even though they have earned a high-school diploma. For decades the schools had a built-in base of students attracted to their open doors and relative affordability. But enrollment at public two-year college has…

  16. Special sliding door with storable handrail to support senior and handicapped persons to walk by themselves

    Science.gov (United States)

    Saitou, K.; Noda, N.-A.; Sano, Y.; Takase, Y.; Murai, K.; Wang, Z. F.; Li, S. Q.; Liu, X.; Tanaka, H.; Kubo, Y.

    2018-06-01

    In this paper, special sliding door is designed in order to support senior and handicapped persons to walk by themselves in hospitals and nursing facilities. This semiautomatic lifting equipment is utilized for the storable handrail to make sure the bad health persons are able to open the door by using a weak force. In this study, to design the equipment of the handrail, the theoretical formula of opening force is derived. Then the simulation is performed by varying geometrical conditions. The simulation results are compared with the experiment results.

  17. FDS5 Simulation for OECD PRISME Fire Test of DOOR PRSD5

    International Nuclear Information System (INIS)

    Lee, Kyu Bok; Park, Jong Seuk

    2009-01-01

    OECD/NEA PRISME Fire Project is an international co-operation project to investigate fire propagation by means of experiments and analyses for nuclear power plant applications. This project focuses on the generation of experimental data for fire and smoke propagation from the fire room to adjacent rooms under various conditions and room configurations. In addition, analyses using computer codes are performed to understand the phenomena of interest and to produce a consistent interpretation of the experimental results. The PRISME Project is composed of series of tests named as SOURCE, DOOR, LEAK and Global Tests. The SOURCE is composed of tests to characterize the fire source, and the DOOR is to study fire and smoke propagation through an open door, while the LEAK is to investigate hot gas leakages through other modes of openings such as holes, a slot, a duct, and a partially opened door. The Global test will be conducted as integral tests on the basis of the results of the previous separate effects tests. In this paper, simulations are performed with FDS5 computer code for the DOOR Test No.5 (PRS D 5) and the calculation results are compared with the corresponding experimental data to study the code capability to predict the phenomena of the hot gas propagation between two rooms

  18. Vraaggericht werken door narratief onderzoek

    Directory of Open Access Journals (Sweden)

    Joos Meesters

    2010-09-01

    Full Text Available Narrative research as a means for demand-driven policy and interventions This article reports on the advantages of performing narrative research discovering need patterns of families, children, local residents regarding quality of the pedagogical climate in their neighbourhood. A need pattern is a constructed set of related questions and needs that people express in response to life events, concrete experiences or within their current habitat. A method for narrative analysis was developed for two applications: use as a research tool and use as a change management tool. In this method professionals assume the role of narrative researchers and simultaneously learn to listen to the demands and needs of their potential clients from a more objective perspective. The method has been developed while performing transdisciplinary narrative research in the town-area of Hatert in Nijmegen, which will be presented as an example case throughout the text. Vraaggericht werken door narratief onderzoek Dit artikel gaat in op de mogelijkheden van narratief onderzoek in het opsporen van vraagpatronen van gezinnen, kinderen, wijkbewoners met betrekking tot de kwaliteit van het opgroeiklimaat in hun wijk. Een vraagpatroon is een set van samenhangende vragen en behoeften die burgers uiten naar aanleiding van een levensgebeurtenis, een concrete ervaring of binnen de actuele context waar zij in leven. Voor deze vorm van onderzoek is een vraaganalyse-instrument ontwikkeld om deze vraagpatronen te identificeren. Dit instrument heeft een dubbel perspectief. Het is een onderzoeksinstrument en een veranderkundig instrument. De professional kruipt in de rol van onderzoeker en leert hiermee te luisteren naar de vragen en behoeften van burgers. Het instrument is ontwikkeld in en voor een transdisciplinair, narratief onderzoek in de wijk Hatert in Nijmegen, dat we als casus zullen presenteren.

  19. Influence of the Pressure Difference and Door Swing on Heavy Contaminants Migration between Rooms.

    Science.gov (United States)

    Hendiger, Jacek; Chludzińska, Marta; Ziętek, Piotr

    2016-01-01

    This paper presents the results of investigations whose aim was to describe the influence of the pressure difference level on the ability of contaminants migration between neighbouring rooms in dynamic conditions associated with door swing. The analysis was based on airflow visualization made with cold smoke, which simulated the heavy contaminants. The test room was pressurized to a specific level and then the door was opened to observe the trail of the smoke plume in the plane of the door. The door was opened in both directions: to the positively and negatively pressurized room. This study focuses on the visualization of smoke plume discharge and an uncertainty analysis is not applicable. Unlike other studies which focus on the analysis of pressure difference, the present study looks at the contaminants which are heavier than air and on "pumping out" the contaminants by means of door swing. Setting the proper level of pressure difference between the contaminated room and the neighbouring rooms can prove instrumental in ensuring protection against toxic contaminants migration. This study helped to establish the threshold of pressure difference necessary to reduce migration of heavy contaminants to neighbouring rooms.

  20. Electric two wheelers, zero emission solution for urban door to door transportation

    DEFF Research Database (Denmark)

    Fasil, Muhammed; Jensen, Bogi Bech

    The noise and exhaust pollution coupled with increasing congestion faced by urban centres demands new personal mobility solution for faster door to door connectivity. The advancement in electric power train and lowering cost of Li-ion battery is made it possible to develop light weight fully...

  1. Comparing energy use and environmental emissions of reinforced wood doors and steel doors

    Science.gov (United States)

    Lynn Knight; Melissa Huff; Janet I. Stockhausen; Robert J. Ross

    2005-01-01

    The USDA Forest Service Forest Products Laboratory has patented a technology that incorporates fiberglass-reinforced wood into the structure of wood doors and other wood building products. The process of reinforcing wood doors with epoxy and fiberglass increases the strength and durability of the product. Also, it allows the use of low-value, small-diameter wood which...

  2. Possible gabapentin and ketamine interaction causing prolonged central nervous system depression during post-operative recovery following cervical laminoplasty: a case report

    Directory of Open Access Journals (Sweden)

    Bejnarowicz Robert P

    2011-04-01

    Full Text Available Abstract Introduction The drugs gabapentin and ketamine are used frequently in the peri-operative setting. There is poor documentation whether or not gabapentin and ketamine interact to cause prolonged depression of the central nervous system. Case Presentation The following is a case report in which a patient, a 58-year-old African-American man, with a history of post-traumatic stress disorder and chronic pain underwent a cervical laminoplasty procedure. The patient presented post-operatively in a dissociative state with paralysis, anarthria and preservation of consciousness. All organic causes were excluded, with the exception of prolonged central nervous system depression from a gabapentin/ketamine drug interaction. A new onset conversion disorder could also not be excluded. Conclusion Although this case by itself is not enough evidence to substantiate a true adverse reaction between gabapentin and ketamine, it is enough to warrant further investigation.

  3. Multi-material poly(lactic acid) scaffold fabricated via fused deposition modeling and direct hydroxyapatite injection as spacers in laminoplasty

    Science.gov (United States)

    Syuhada, Ghifari; Ramahdita, Ghiska; Rahyussalim, A. J.; Whulanza, Yudan

    2018-02-01

    Nowadays, additive manufacturing method has been used extensively to realize any product with specific attributes rather than the conventional subtractive manufacturing method. For instance, the additive manufacturing has enable us to construct a product layer-by-layer by successively depositing several materials in one session and one platform. This paper studied the properties of a 3D printed scaffold fabricated through Poly(Lactic-acid) (PLA) deposition modelling in combination with injectable hydroxyapatite (HA)/alginate as cell carrier. The scaffold was designed to serve as a spacer in cervical laminoplasty. Therefore, a series of test were conducted to elaborate the mechanical property, porosity and in-vitro toxicity testing. The results showed that the method is reliable to fabricate the scaffold as desired although the toxicity test needs more confirmation.

  4. The Globe opens its doors to the public

    CERN Multimedia

    2005-01-01

    The Globe of Science and Innovation has quickly become the most recognisable landmark on the CERN skyline. Since construction was completed last summer, the Globe's distinctive spherical shape has greeted and intrigued visitors and employees on arrival at CERN.

  5. Door still open for action on issue of global warming

    International Nuclear Information System (INIS)

    Crow, P.

    1992-01-01

    Global warming may or may not be a legitimate environmental threat, but Washington lobbyists consider it a legislative threat. It does not appear the current Congress will limit or tax use of U.S. fossil fuels, whose burning releases carbon dioxide into the atmosphere. This paper reports that some scientists have claimed a concentration of greenhouse gases in the atmosphere will result in a significant warming of the earth by 2050, threatening agriculture, altering ecosystems, and even melting polar ice and causing rising oceans to flood coastal areas and islands. In 1990 a United Nations panel of climate scientists predicted a 2 degrees C. increase in world temperatures within 35 years and 6 degrees by the end of the next century. Some scientists say preventing further increases will require a 60% reduction in current CO 2 emissions. The oil industry already is beginning to feel heat from the global warming issue. The Environmental Protection Agency calculates energy production and use is responsible for 57% of current emissions caused by man

  6. Opening Doors to Nursing Degrees: A Proposal from Ontario's Colleges

    Science.gov (United States)

    Colleges Ontario, 2010

    2010-01-01

    Ontario needs to expand nursing education options to improve access to the nursing profession, create better pathways amongst all nursing occupations, and build Ontario's capacity to meet the province's long-term nursing needs. Ontario's colleges are capable of playing a larger role within a long-term provincial strategy for sustaining and…

  7. Cold fusion: Need to keep door wide open

    International Nuclear Information System (INIS)

    Jones, S.E.

    1992-01-01

    Steven E. Jones of Brigham Young University in Provo, Utah, began work on cold fusion in 1986. Although insisting his work is markedly different from that of Stanley Pons and Martin Fleischmann at the nearby University of Utah, he nevertheless was tarred by the same brush that besmirched their sensational revelations in 1989. Whereas we were searching for tiny nuclear effects, they were looking for heat production, he explains. In no way, he insists, does his work substantiate the bold claims of heat generation by cold fusion in an electrochemical cell. In fact, Jones doublts Fleischmann and Pons' claims and sees evidence of either self-deception or hype in their actions. He adds, For useful energy production, thermonuclear (hot) fusion remains for more promising than that cold fusion claims of Pons and Fleischmann. But at the same time, Jones finds it necessary to appeal for tolerance for researchers brave enough to continue in the now unfashionable field of cold fusion

  8. Towards Constructive Foundations of Cognitivism: Breaking in Open Doors?

    Czech Academy of Sciences Publication Activity Database

    Wiedermann, Jiří

    2013-01-01

    Roč. 9, č. 1 (2013), s. 38-40 ISSN 1782-348X Institutional support: RVO:67985807 Keywords : constructive cognitivism * diffusion search algorithm * amorphous computing system Subject RIV: IN - Informatics, Computer Science http://www.univie.ac.at/constructivism/journal/9/1/038.wiedermann

  9. Global reach: international doors wide open to Canadians

    International Nuclear Information System (INIS)

    Lorenz, A.

    2000-01-01

    Opportunities available to Canadian companies abroad, particularly in the oil and gas field service sector, are reviewed. The overall conclusion is that while in some parts of the world, such as the Middle East negotiating contracts may be a challenge, the problem can be overcome by hiring a reliable local agent who speaks the language and is familiar with local business practices. The process is often time-consuming and requires a great deal of patience, but the opportunities are there to exploit. The excellent reputation of Canadian businessmen for for honesty and high quality of service makes it all possible

  10. Twitter and Facebook Open the Door to Collaboration

    Science.gov (United States)

    Huwe, Terence K.

    2012-01-01

    Building a social media profile itself is a rewarding experience for digital librarians, but there is another aspect to social media immersion, and it is a powerful tool for the profession. As librarians establish expert status in the use of popular tools such as Facebook, Twitter, Tumblr, and WordPress, they can add training and even product…

  11. Philosophy: A Key To Open the Door to Critical Thinking.

    Science.gov (United States)

    Clarke, David J.; Holt, Janet

    2001-01-01

    A learning module for nursing attempts to prepare nurses to understand philosophical inquiry and develop critical thinking skills. Teaching strategies used included exercises involving verbal disagreement and ambiguity and critical examination of publications. (Contains 42 references.) (SK)

  12. Opening Doors to Cryospheric Data and Information, Virtually

    Science.gov (United States)

    Pharris, K.; Ballagh, L. M.; Swick, R.; Zaffino, P.

    2006-12-01

    Via Google Earth, the National Snow and Ice Data Center (NSIDC) is demonstrating different methods of data presentation-visualization, animation and pinpointing of in situ data-to create new opportunities for those who currently provide and use cryospheric data and to empower Google Earth users with information to make their own decisions about hot topics such as climate change. Using visualization capabilities within Google Earth and the Keyhole Markup Language (KML), NSIDC has made images of glaciers, sea ice, snow and permafrost display over the globe. NSIDC is also creating animations within Google Earth for gridded, time-series data sets. These animations could, for example, demonstrate how sea ice extent has fluctuated over time. In situ data accessible through Google Earth enables users to locate and view cryospheric data using a common search criteria, spatial coverage. This fly-and-click functionality makes it easier for users to sort through ever-increasing amounts of data. The access to and visualization of data within Google Earth can expose new audiences to different applications of cryospheric data, enabling researchers in other scientific disciplines, commercial consultants and engineers, policy makers, educators and students to apply cryospheric information to their work. Google Earth also makes it possible to educate users in context and provide a multi-sensory learning experience. For example, users can view glaciers in the context of where they exist, see images of the formations, and access data and additional reference material.

  13. Cabinet chooses TNK-BP, but doors remain open

    Index Scriptorium Estoniae

    2005-01-01

    Leedu valitsus alustab Vene-Suurbritannia ühisfirmaga TNK-BP läbirääkimisi Mazeikiu Nafta aktsiaenamuse omandamiseks. Kuid samal ajal on võimalik alustada läbirääkimisi ka teiste võimalike investoritega

  14. Global reach: international doors wide open to Canadians

    Energy Technology Data Exchange (ETDEWEB)

    Lorenz, A.

    2000-05-01

    Opportunities available to Canadian companies abroad, particularly in the oil and gas field service sector, are reviewed. The overall conclusion is that while in some parts of the world, such as the Middle East negotiating contracts may be a challenge, the problem can be overcome by hiring a reliable local agent who speaks the language and is familiar with local business practices. The process is often time-consuming and requires a great deal of patience, but the opportunities are there to exploit. The excellent reputation of Canadian businessmen for for honesty and high quality of service makes it all possible.

  15. Design and Construction of Pool Door for Research Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Kwangsub; Lee, Sangjin; Choi, Jinbok; Oh, Jinho; Lee, Jongmin [KAERI, Daejeon (Korea, Republic of)

    2016-05-15

    The pool door is a structure to isolate the reactor pool from the service pool for maintenance. The pool door is installed before the reactor pool is drained. The pool door consists of structural component and sealing component. The main structures of the pool door are stainless steel plates and side frames. The plates and frames are assembled by welded joints. Lug is welded at the top of the plate. The pool door is submerged in the pool water when it is used. Materials of the pool door should be resistive to corrosion and radiation. Stainless steel is used in structural components and air nozzle assemblies. Features of design and construction of the pool door for the research reactor are introduced. The pool door is designed to isolate the reactor pool for maintenance. Structural analysis is performed to evaluate the structural integrity during earthquake. Tests and inspections are also carried out during construction to identify the safety and function of the pool door.

  16. Design and Construction of Pool Door for Research Reactor

    International Nuclear Information System (INIS)

    Jung, Kwangsub; Lee, Sangjin; Choi, Jinbok; Oh, Jinho; Lee, Jongmin

    2016-01-01

    The pool door is a structure to isolate the reactor pool from the service pool for maintenance. The pool door is installed before the reactor pool is drained. The pool door consists of structural component and sealing component. The main structures of the pool door are stainless steel plates and side frames. The plates and frames are assembled by welded joints. Lug is welded at the top of the plate. The pool door is submerged in the pool water when it is used. Materials of the pool door should be resistive to corrosion and radiation. Stainless steel is used in structural components and air nozzle assemblies. Features of design and construction of the pool door for the research reactor are introduced. The pool door is designed to isolate the reactor pool for maintenance. Structural analysis is performed to evaluate the structural integrity during earthquake. Tests and inspections are also carried out during construction to identify the safety and function of the pool door

  17. The doors have been removed… for YOUR safety

    DEFF Research Database (Denmark)

    Abildgaard, Mette Simonsen

    on the classic box-shaped telephone booths, which had been a part of Danish communication infrastructure since 1932. But the doors were never reinstalled after the capture of the user, who became known as The Telephone Bomber, and a competition for a new open design was commissioned in 1980. The winning design......'s shape in fact made it inoperable for wheelchair-users. In contrast, the mayor of Copenhagen was fond of The Question Mark and vetoed alternative designs. Following several years of dispute, The Question Mark was installed in central Copenhagen, and Utzon Arkitekter, firm of Jørn Utzon, were commissioned...... to design a second open telephone booth. The Utzon-booth was ready in 1987, and received favourable reactions from the public on its design, which drew on the classic box-shape. I will present how, between human and nonhuman actors, in such different domains as politics, design, infrastructure and terror...

  18. Serious Learning with Science Comics: "Antarctic Log" as a Tool for Understanding Climate Research in AntarcticaScience comics open doors, providing multiple entry points for diverse learners. Karen Romano Young, award-winning author, presents "Antarctic Log", a comic about her spring 2018 Palmer Station tour, a tool for teaching and inspiration.

    Science.gov (United States)

    Young, K. R.

    2017-12-01

    Graphic nonfiction: what is it? Some call these books and articles science comics, but they're no joke: created through research and direct experience by artists invested in creating multiple entry points for new learners, comics can open doors for discovery as introduction, enrichment, or as a vital center point to teaching. Find out what educational pedagogists, scientists, and - yes! - students themselves think about reading, viewing, learning from, and creating science comics in the classroom. Karen Romano Young is the award-winning author of traditional and graphic fiction and nonfiction for children, including Doodlebug, the forthcoming Diving for Deep-Sea Dragons, and the Odyssey/Muse magazine comics feature Humanimal Doodles. In spring 2018 (Antarctic autumn) Young will work as part of a Bigelow Laboratory team studying the production of DMSP by phytoplankton, and the resulting cloud formation. This is invisible stuff, difficult for lay audiences to envision and comprehend. But the audience is already forming around "Antarctic Log," a science comic that tells the story of the science and the experience of doing climate research at Palmer Station as winter draws near. Science comics aren't just for enrichment. They're an invitation, providing multiple entry points for diverse learners. I have received unanticipated support from education groups (including NSTA and IRA), parenting groups, and special educators because these highly visual presentations of middle grade and middle school level material makes the stories and concepts accessible to atypical fiction- and science-reading audiences. As a result, I've learned a great deal about the underlying differences between my material and traditional, text-oriented materials in which visuals may be highly coordinated but are still ancillary. An article that might seem forbidding as text appears open to interpretation in my format, so that readers can pick where to begin reading and how to proceed through the

  19. Self-testing security sensor for monitoring closure of vault doors and the like

    International Nuclear Information System (INIS)

    Cawthorne, D.C.

    1997-01-01

    A self-testing device is provided for a monitoring system for monitoring whether a closure member such as a door or window is closed. The monitoring system includes a switch unit mounted on the frame of the closure member being monitored and including magnetically biased switches connected in one or more electrical monitoring circuits, and a door magnet unit mounted on the closure member being monitored. The door magnet includes one or more permanent magnets that produce a magnetic field which, when the closure member is closed, cause said switches to assume a first state. When the closure member is opened, the switches switch to a second, alarm state. The self-testing device is electrically controllable from a remote location and produces a canceling or diverting magnetic field which simulates the effect of movement of the closure member from the closed position thereof without any actual movement of the member. 5 figs

  20. De fietsstraat : Onderzoek naar fietsverbindingen door verblijfsgebieden

    NARCIS (Netherlands)

    Andriesse, H.C.; Hansen, J.A.

    1996-01-01

    De bestaande fietsverbindingen in de stad lopen meestal langs doorgaande wegen met druk autoverkeer. Door de toename van het autoverkeer zijn deze verbindingen niet altijd meer de meest geschikte fietsvoorzieningen. Ook de maatregelen die in het kader van duurzaam veilig wegverkeer worden

  1. Maillard-reactie door model beheersbaar

    NARCIS (Netherlands)

    Roost, van M.

    2006-01-01

    Gewenste en ongewenste bruinkleuring van levensmiddelen door een Maillard-reactie is vaak lastig te beheersen. Wageningse onderzoekers ontwikkelden een simulatiemodel, waarmee producentenmeer inzicht krijgen in de Maillard-reactie, en zo ook de kleur van het eindproduct beter kunnen beheersen

  2. Gaffkemia van kreeften door Aerococcus viridans

    NARCIS (Netherlands)

    Engelsma, M.Y.; Haenen, O.L.M.

    2011-01-01

    Artikel over een bacteriële ziekte van onder andere kreeften, de zogenaamde Gaffkemia, veroorzaakt door de bacterie Aerococcus viridans. Deze ziekte is in Nederland nog niet eerder gevonden bij kreeften, maar zou met importen van kreeftachtigen mee kunnen komen.

  3. Gezondheidsschade door calamiteiten met gevaarlijke stoffen

    NARCIS (Netherlands)

    Weger, D. de; Feron, V.J.; Zwart, A.; Vrijer, F. de

    1993-01-01

    Door de Afdeling Industriële Veiligheid van IMET-TNO (Instituut voor Milieu- en Energietechnologie, Hoofdgroep Milieu en Energie te Apeldoorn) en de Afdeling Biologische Toxicologie van ITV-TNO (Instituur voor Toxicologie en voeding, Hoofdgroep Voeding te Zeist) is het project 'Gezondheidsschade

  4. 14 CFR 25.783 - Fuselage doors.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Fuselage doors. 25.783 Section 25.783 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS... operated manually; (ii) The powered latch actuators, if installed; and (iii) The relative motion between...

  5. Doors for memory: A searchable database.

    Science.gov (United States)

    Baddeley, Alan D; Hitch, Graham J; Quinlan, Philip T; Bowes, Lindsey; Stone, Rob

    2016-11-01

    The study of human long-term memory has for over 50 years been dominated by research on words. This is partly due to lack of suitable nonverbal materials. Experience in developing a clinical test suggested that door scenes can provide an ecologically relevant and sensitive alternative to the faces and geometrical figures traditionally used to study visual memory. In pursuing this line of research, we have accumulated over 2000 door scenes providing a database that is categorized on a range of variables including building type, colour, age, condition, glazing, and a range of other physical characteristics. We describe an illustrative study of recognition memory for 100 doors tested by yes/no, two-alternative, or four-alternative forced-choice paradigms. These stimuli, together with the full categorized database, are available through a dedicated website. We suggest that door scenes provide an ecologically relevant and participant-friendly source of material for studying the comparatively neglected field of visual long-term memory.

  6. Development of a tornado safe room door from wood Products: door design and impact testing

    Science.gov (United States)

    Robert H. Falk; James J. Bridwell

    2016-01-01

    In this study, a tornado safe room door built from wood products and steel sheeting was developed and impact-tested according to tornado safe room standards. Results indicate that an door constructed from as few as two sheets of 23/32-in. (18.26-mm) construction-grade plywood and overlaid with 18-gauge (0.05-in.- (1.27- mm-) thick) steel can pass the required impact...

  7. Door Security using Face Detection and Raspberry Pi

    Science.gov (United States)

    Bhutra, Venkatesh; Kumar, Harshav; Jangid, Santosh; Solanki, L.

    2018-03-01

    With the world moving towards advanced technologies, security forms a crucial part in daily life. Among the many techniques used for this purpose, Face Recognition stands as effective means of authentication and security. This paper deals with the user of principal component and security. PCA is a statistical approach used to simplify a data set. The minimum Euclidean distance found from the PCA technique is used to recognize the face. Raspberry Pi a low cost ARM based computer on a small circuit board, controls the servo motor and other sensors. The servo-motor is in turn attached to the doors of home and opens up when the face is recognized. The proposed work has been done using a self-made training database of students from B.K. Birla Institute of Engineering and Technology, Pilani, Rajasthan, India.

  8. Solution for Direct Solar Impingement Problem on Landsat-7 ETM+ Cooler Door During Cooler Outgas in Flight

    Science.gov (United States)

    Choi, Michael K.

    1999-01-01

    There was a thermal anomaly of the Landsat-7 Enhanced Thematic Mapper Plus (ETM+) radiative cooler cold stage during the cooler outgas phase in flight. With the cooler door in the outgas position and the outgas heaters enabled, the cold stage temperature increased to a maximum of 323 K when the spacecraft was in the sunlight, which was warmer than the 316.3 K upper set point of the outgas heater controller on the cold stage. Also, the outgas heater cycled off when the cold stage was warming up to 323 K. A corrective action was taken before the attitude of the spacecraft was changed during the first week in flight. One orbit before the attitude was changed, the outgas heaters were disabled to cool off the cold stage. The cold stage temperature increase was strongly dependent on the spacecraft roll and yaw. It provided evidence that direct solar radiation entered the gap between the cooler door and cooler shroud. There was a concern that the direct solar radiation could cause polymerization of hydrocarbons, which could contaminate the cooler and lead to a thermal short. After outgas with the cooler door in the outgas position for seven days, the cooler door was changed to the fully open position. With the cooler door fully open, the maximum cold stage temperature was 316.3 K when the spacecraft was in the sunlight, and the duty cycle of the outgas heater in the eclipse was the same as that in the sunlight. It provided more evidence that direct solar radiation had entered the gap between the cooler door and cooler shroud. Cooler outgas continued for seven more days, with the cooler door fully open. The corrective actions had prevented overheating of the cold stage and cold focal plane array (CFPA), which could damage these two components. They also minimized the risk of contamination on the cold stage, which could lead to a thermal short.

  9. Real-time door detection for indoor autonomous vehicle

    Science.gov (United States)

    He, Zhihao; Zhu, Ming

    2017-07-01

    Indoor Autonomous Vehicle(IAV) is used in many indoor scenes. Such as hotels and hospitals. Door detection is a key issue to guide the IAV into rooms. In this paper, we consider door detection in the use of indoor navigation of IAV. Since real-time properties are important for real-world IAV, the detection algorithm must be fast enough. Most monocular-camera based door detection model need a perfect detection of the four line segments of the door or the four corners. But in many situations, line segments could be extended or cut off. And there could be many false detected corners. And few of them can distinguish doors from door-like objects with door-like shape effectively. We proposed a 2-D vision model of the door that is made up of line segments. The number of parts detected is used to determine the possibility of a door. Our algorithm is tested on a database of doors.1 The robustness and real-time are verified. The precision is 89.4%. Average time consumed for processing a 640x320 figure is 44.73ms.

  10. Traumatic asphyxia--fatal accident in an automatic revolving door.

    Science.gov (United States)

    Cortis, J; Falk, J; Rothschild, M A

    2015-09-01

    Due to continuing modernisation, the number of automatic doors in routine use, including powered revolving doors, has increased in recent years. Automatic revolving doors are found mostly in department stores, airports, railway stations and hospitals. Although safety arrangements and guidelines concerning the installation of automatic doors are in existence, their disregard in conjunction with obsolete or incorrect installation can lead to fatal accidents. In this report, a 19-month-old boy is described whose right arm was caught between the elements of an automatic revolving door. As a direct result of rescue attempts, the child's body was drawn further into the narrow gap between elements of the door. To get the boy's body out of the 4-cm-wide gap between the fixed outer wall of the revolving door and the revolving inner, back-up batteries had to be disconnected so as to stop the electrical motor powering the door. Cardiopulmonary resuscitation was begun immediately after the rescue but was unsuccessful; the child was declared dead at the hospital he was taken to. The cause of death was a combination of compression-related skull and brain injury together with thoracic compression. This case shows an outstanding example of the preventive aspect as a special task of forensic medicine. Additionally, it serves as a warning for the correct installation and use of automatic revolving doors. Even so, small children should not use these doors on their own, but only with an alert companion, so as to prevent further fatal accidents of this sort.

  11. DoOR 2.0 - Comprehensive Mapping of Drosophila melanogaster Odorant Responses

    Science.gov (United States)

    Münch, Daniel; Galizia, C. Giovanni

    2016-02-01

    Odors elicit complex patterns of activated olfactory sensory neurons. Knowing the complete olfactome, i.e. the responses in all sensory neurons for all relevant odorants, is desirable to understand olfactory coding. The DoOR project combines all available Drosophila odorant response data into a single consensus response matrix. Since its first release many studies were published: receptors were deorphanized and several response profiles were expanded. In this study, we add unpublished data to the odor-response profiles for four odorant receptors (Or10a, Or42b, Or47b, Or56a). We deorphanize Or69a, showing a broad response spectrum with the best ligands including 3-hydroxyhexanoate, alpha-terpineol, 3-octanol and linalool. We include all of these datasets into DoOR, provide a comprehensive update of both code and data, and new tools for data analyses and visualizations. The DoOR project has a web interface for quick queries (http://neuro.uni.kn/DoOR), and a downloadable, open source toolbox written in R, including all processed and original datasets. DoOR now gives reliable odorant-responses for nearly all Drosophila olfactory responding units, listing 693 odorants, for a total of 7381 data points.

  12. Design Report for ACP Hot Cell Rear Door

    Energy Technology Data Exchange (ETDEWEB)

    Ku, J. H.; Kwon, K. C.; Choung, W. M.; Cho, I. J.; Kook, D. H.; Lee, W. K.; You, G. S.; Lee, E. P.; Park, S. W

    2005-12-15

    A hot-cell facility was constructed at the IMEF building for the demonstrate ACP process. ACP hot-cell consists of process cell and maintenance cell, and each cell has rear door. Since this facility was constructed at basement floor, all process materials, equipment and radioactive materials are take in and out through the rear door. Also, this door can be an access route of workers for the maintenance works. Therefore ACP hot-cell rear doors must maintain the radiation shielding, sealing, mechanical and structural safety. This report presents design criteria, design contents of each part and driving part. It was confirmed that the rear doors sufficiently maintain the safety through the structural analysis and shielding analysis. Also, it was confirmed that the rear doors were constructed as designed by the gamma scanning test after the installation.

  13. Modal analysis of pool door in water tank

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Kang Soo; Jeong, Kyeong Hoon; Park, Chan Gook; Koo, In Soo [KAERI, Daejeon (Korea, Republic of)

    2012-10-15

    A pool door is installed at the chase of the pool gate by means of an overhead crane in the building of a research reactor. The principal function of the pool door, which is located between the reactor pool and service pool, is to separate the reactor pool from the service pool for the maintenance and/or the removal of the equipment either in the reactor pool or service pool. The pool door consists of stainless steel plates supported by structural steel frames and sealing components. The pool door is equipped with double inflatable gaskets. The configuration of the pool door is shown in Figure 1. The FEM analysis and theoretical calculation by the formula were performed to evaluate the natural frequency for the pool door in the water. The results from the two methods were compared.

  14. Design Report for ACP Hot Cell Rear Door

    International Nuclear Information System (INIS)

    Ku, J. H.; Kwon, K. C.; Choung, W. M.; Cho, I. J.; Kook, D. H.; Lee, W. K.; You, G. S.; Lee, E. P.; Park, S. W.

    2005-12-01

    A hot-cell facility was constructed at the IMEF building for the demonstrate ACP process. ACP hot-cell consists of process cell and maintenance cell, and each cell has rear door. Since this facility was constructed at basement floor, all process materials, equipment and radioactive materials are take in and out through the rear door. Also, this door can be an access route of workers for the maintenance works. Therefore ACP hot-cell rear doors must maintain the radiation shielding, sealing, mechanical and structural safety. This report presents design criteria, design contents of each part and driving part. It was confirmed that the rear doors sufficiently maintain the safety through the structural analysis and shielding analysis. Also, it was confirmed that the rear doors were constructed as designed by the gamma scanning test after the installation

  15. COMPARISON OF RESULTS OF THERMAL TESTS OF BALCONY DOORS

    Directory of Open Access Journals (Sweden)

    Golubev Stanislav Sergeevich

    2012-10-01

    Full Text Available Results of thermal tests of balcony doors are presented in the article. In the course of the research project, two types of doors were tested. The first type represents a PVC frame door (width 82 mm; it has a triple glazing (4K-16Ar-4-16Ar-K4; its blank part represents a polystyrene sandwich panel (width 40 mm. The second type represents a PVC frame door (width 82 mm, that has a triple glazing (4K-16Ar-4-16Ar-K4 and composite PVC panels. The testing procedure and processing results are described in the article. The test has demonstrated that the thermal resistance value of the balcony door of the first type exceeds the thermal resistance value of the balcony door of the second type.

  16. Psychiatric wards with locked doors--advantages and disadvantages according to nurses and mental health nurse assistants.

    Science.gov (United States)

    Haglund, K; von Knorring, L; von Essen, L

    2006-04-01

    To describe nurses' and mental health nurse assistants' perceptions of advantages and disadvantages about working on a psychiatric ward with a locked entrance door. Psychiatric staff sometimes needs to protect patients from harming themselves or others. To keep the entrance door locked may help staff to achieve this goal. How locked entrance doors at psychiatric wards are experienced by staff, working on these wards, has been investigated to a very limited extent. The study was explorative and descriptive. Audio taped, semi-structured interviews with open-ended questions about advantages and disadvantages about working on a psychiatric ward with a locked entrance door, were conducted with 20 nurses and 20 mental health nurse assistants. Data were analyzed with content analysis. A content analysis revealed eight categories of advantages and 18 categories of disadvantages. Most advantages mentioned by nurses and mental health nurse assistants were categorized as providing staff with control over patients, providing patients with a secure and efficient care and protecting patients and staff against 'the outside'. Most disadvantages mentioned by nurses were categorized as causing extra work for staff, making patients feel confined, making patients feel dependent and creating a non-caring environment. Most disadvantages mentioned by mental health nurse assistants were categorized as causing extra work for staff, making patients feel confined, causing emotional problems for patients, making staff's power obvious and forcing patients to adapt to other patients' needs. Nurses and mental health nurse assistants mentioned more disadvantages than advantages and nurses mentioned more disadvantages than mental health nurse assistants. Nurses and mental health nurse assistants perceive a number of advantages and disadvantages for themselves, patients and significant others with a locked door at a psychiatric ward. Most of these concern patients' experiences. It is important for

  17. Door recognition in cluttered building interiors using imagery and lidar data

    Science.gov (United States)

    Díaz-Vilariño, L.; Martínez-Sánchez, J.; Lagüela, S.; Armesto, J.; Khoshelham, K.

    2014-06-01

    Building indoors reconstruction is an active research topic due to the importance of the wide range of applications to which they can be subjected, from architecture and furniture design, to movies and video games editing, or even crime scene investigation. Among the constructive elements defining the inside of a building, doors are important entities in applications like routing and navigation, and their automated recognition is advantageous e.g. in case of large multi-storey buildings with many office rooms. The inherent complexity of the automation of the recognition process is increased by the presence of clutter and occlusions, difficult to avoid in indoor scenes. In this work, we present a pipeline of techniques used for the reconstruction and interpretation of building interiors using information acquired in the form of point clouds and images. The methodology goes in depth with door detection and labelling as either opened, closed or furniture (false positive)

  18. Door recognition in cluttered building interiors using imagery and lidar data

    Directory of Open Access Journals (Sweden)

    L. Díaz-Vilariño

    2014-06-01

    Full Text Available Building indoors reconstruction is an active research topic due to the importance of the wide range of applications to which they can be subjected, from architecture and furniture design, to movies and video games editing, or even crime scene investigation. Among the constructive elements defining the inside of a building, doors are important entities in applications like routing and navigation, and their automated recognition is advantageous e.g. in case of large multi-storey buildings with many office rooms. The inherent complexity of the automation of the recognition process is increased by the presence of clutter and occlusions, difficult to avoid in indoor scenes. In this work, we present a pipeline of techniques used for the reconstruction and interpretation of building interiors using information acquired in the form of point clouds and images. The methodology goes in depth with door detection and labelling as either opened, closed or furniture (false positive

  19. Sequestered spaces and defective doors in tales by Collins and Riddell

    Directory of Open Access Journals (Sweden)

    Ilse M. Bussing

    2012-11-01

    Full Text Available http://dx.doi.org/10.5007/2175-8026.2012n62p99   In nineteenth-century texts the Victorian home is not merely asetting for supernatural activity—it is the protagonist. This articleconsiders how architecture engendered and shaped hauntedspace within Gothic texts by focusing on a single feature—the door—whose symbolic charge has been widely discussedby critics. However, instead of focusing on psychoanalyticor feminist notions commonly attached to this element, thisarticle considers architectural manuals of the day in order to“read” spatial and cultural implications of the door in Victorianhouseholds, arguing that an excessive concern for privacy andconcealment in life translates easily into Gothic fiction, in theform of spatial anxiety and infiltration. The discussion centerson two literary texts: The Dead Secret (1857 by Wilkie Collinsand The Open Door by Charlotte Riddell (1882.

  20. The chatter door, designing for in-between spaces

    NARCIS (Netherlands)

    Duel, T.; Levy, P.

    2015-01-01

    The project presented in this paper is part of a broader research addressing in-between spaces and the designing of experiences taking place there. The project focuses on door frames, and inquires the way to improve social interactions taking place 'at the door'. To do so, the approach is structured

  1. Revolving Classroom Door: Management Strategies To Eliminate the Quick Spin.

    Science.gov (United States)

    Rancifer, Jesse L.

    This paper presents classroom management practices that can be used to avoid the "revolving classroom door." In the revolving classroom door, misbehaving students are sent to the principal, and eventually returned to the classroom with no gains in student behavior or opportunity for learning. The paper begins by discussing the meaning of classroom…

  2. Looking for the WIMP next door

    Science.gov (United States)

    Evans, Jared A.; Gori, Stefania; Shelton, Jessie

    2018-02-01

    We comprehensively study experimental constraints and prospects for a class of minimal hidden sector dark matter (DM) models, highlighting how the cosmological history of these models informs the experimental signals. We study simple `secluded' models, where the DM freezes out into unstable dark mediator states, and consider the minimal cosmic history of this dark sector, where coupling of the dark mediator to the SM was sufficient to keep the two sectors in thermal equilibrium at early times. In the well-motivated case where the dark mediators couple to the Standard Model (SM) via renormalizable interactions, the requirement of thermal equilibrium provides a minimal, UV-insensitive, and predictive cosmology for hidden sector dark matter. We call DM that freezes out of a dark radiation bath in thermal equilibrium with the SM a WIMP next door, and demonstrate that the parameter space for such WIMPs next door is sharply defined, bounded, and in large part potentially accessible. This parameter space, and the corresponding signals, depend on the leading interaction between the SM and the dark mediator; we establish it for both Higgs and vector portal interactions. In particular, there is a cosmological lower bound on the portal coupling strength necessary to thermalize the two sectors in the early universe. We determine this thermalization floor as a function of equilibration temperature for the first time. We demonstrate that direct detection experiments are currently probing this cosmological lower bound in some regions of parameter space, while indirect detection signals and terrestrial searches for the mediator cut further into the viable parameter space. We present regions of interest for both direct detection and dark mediator searches, including motivated parameter space for the direct detection of sub-GeV DM.

  3. Detecting Signage and Doors for Blind Navigation and Wayfinding.

    Science.gov (United States)

    Wang, Shuihua; Yang, Xiaodong; Tian, Yingli

    2013-07-01

    Signage plays a very important role to find destinations in applications of navigation and wayfinding. In this paper, we propose a novel framework to detect doors and signage to help blind people accessing unfamiliar indoor environments. In order to eliminate the interference information and improve the accuracy of signage detection, we first extract the attended areas by using a saliency map. Then the signage is detected in the attended areas by using a bipartite graph matching. The proposed method can handle multiple signage detection. Furthermore, in order to provide more information for blind users to access the area associated with the detected signage, we develop a robust method to detect doors based on a geometric door frame model which is independent to door appearances. Experimental results on our collected datasets of indoor signage and doors demonstrate the effectiveness and efficiency of our proposed method.

  4. Blower door method in radon diagnostics

    International Nuclear Information System (INIS)

    Fronka, A.; Moucka, L.

    2004-01-01

    The idea of the radon transfer factor is commonly presented as the ratio of the building indoor radon concentration to the subsoil radon concentration. Ventilation and the pressure field over the whole building envelope, which varies in a time over a very wide range even in the same building, poses a major problem. Therefore a new approach based on the controlled conditions determining the soil air infiltration was developed. Radon in soil gas infiltrates into the building indoor environment particularly through cracks and other leakages in the structure providing the building contact with its subsoil. The infiltration is driven by the air pressure difference on the two sides of the structure. The pressure difference is caused by the stack effect and its value ranges from 1-2 Pa in family houses to some tens of Pa in higher buildings. Unfortunately, the pressure difference is very unstable under normal conditions, being affected by a host of parameters such as the height of the building, distribution and geometry of leakages, outdoor-indoor temperature difference, etc. Wind direction and velocity of the wind plays a major role. In our research the blower door method was applied in combination with a monitoring of the indoor radon concentration. The indoor-outdoor pressure difference and the pressure difference at the two sides of the screen shutter of the blower door fan are also measured. The blower door ensures a constant, evaluable air exchange rate. The fan power is regulated to provide a stable pressure difference within the range of roughly 5-100 Pa. This approach provides very well defined conditions allowing us to apply a constant ventilation-constant radon supply model. In such circumstances the dynamical changes of radon concentrations are very fast, and therefore a unique continual radon monitor was applied. The radon supply rate is evaluated from the radon steady state of the time course of radon concentration. The dependence of the radon supply rate on

  5. Ontwateren van zeugenmest door middel van omgekeerde osmose

    NARCIS (Netherlands)

    Thelosen, J.; Gastel, van J.; Cuyck, van J.

    1992-01-01

    In periodiek nummer 1 (februari 1991) is het proces van omgekeerde osmose reeds beschreven. In het kort komt omgekeerde osmose op het volgende neer: de te ontwateren vloeistof wordt onder hoge druk (55 bar) door filterbuizen gepompt.

  6. Deeltjesemissie door wegverkeer: emissiefactoren, deeltjesgrootteverdeling en chemische samenstelling

    NARCIS (Netherlands)

    Brink RMM van den; LAE

    1996-01-01

    In deze literatuurstudie werden zowel gegevens over uitlaatgas-deeltjesemissie alsook over deeltjesemissie als gevolg van slijtage van banden, remvoering en wegdek ge-inventariseerd. Daarnaast werd aandacht besteed aan deeltjesemissie als gevolg van, door rijdend verkeer, opgewerveld stof. Naast

  7. Rotational and frictional dynamics of the slamming of a door

    Science.gov (United States)

    Klein, Pascal; Müller, Andreas; Gröber, Sebastian; Molz, Alexander; Kuhn, Jochen

    2017-01-01

    A theoretical and experimental investigation of the rotational dynamics, including friction, of a slamming door is presented. Based on existing work regarding different damping models for rotational and oscillatory motions, we examine different forms for the (angular) velocity dependence (ωn, n = 0, 1, 2) of the frictional force. An analytic solution is given when all three friction terms are present and several solutions for specific cases known from the literature are reproduced. The motion of a door is investigated experimentally using a smartphone, and the data are compared with the theoretical results. A laboratory experiment under more controlled conditions is conducted to gain a deeper understanding of the movement of a slammed door. Our findings provide quantitative evidence that damping models involving quadratic air drag are most appropriate for the slamming of a door. Examining this everyday example of a physical phenomenon increases student motivation, because they can relate it to their own personal experience.

  8. Plattelandimpuls : leren door gewoon te dóen

    NARCIS (Netherlands)

    Noorduyn, L.

    2008-01-01

    Plattelandsondernemers die hun activiteiten verbreden, vergeten nogal eens serieuze aandacht te besteden aan de vermarkting van hun product. Met het project PlattelandImpuls hebben ondernemers hun vaardigheden op dat vlak kunnen verbeteren door te werken met product-marktcombinaties.

  9. An unexpected knock on Corrigan’s secret door

    Science.gov (United States)

    Woywodt, Alexander

    2010-01-01

    Corrigan’s secret door describes a metaphorical escape route for busy physicians. The term was derived from the successful and exceptionally busy professional life of Irish physician Dominic John Corrigan (1802–80). It is claimed that Corrigan’s outpatient clinic was so busy that he required a secret door in his consulting rooms to escape from the ever-growing queue of eager patients. The origins of this charming story are unknown, and the door may have never existed. However, at present, Corrigan’s secret door is often quoted when busy physicians have their own little ways in surviving a stressful professional life. Generations of British-trained doctors have grown up with Corrigan’s secret door, as it was featured in the introduction of the Oxford Handbook of Clinical Medicine. Accordingly, trainees as well as more senior doctors are often reminded that having a ‘secret door’ is vital in surviving in the medical profession. My own escape is through classical music and the violoncello, in particular. As the name implies, my own secret door is normally invisible to colleagues and patients. This little article is about a patient who found me out, and a reflection on the role of classical music and the cello in my professional life. PMID:25984078

  10. From acoustic descriptors to evoked quality of car door sounds.

    Science.gov (United States)

    Bezat, Marie-Céline; Kronland-Martinet, Richard; Roussarie, Vincent; Ystad, Sølvi

    2014-07-01

    This article describes the first part of a study aiming at adapting the mechanical car door construction to the drivers' expectancies in terms of perceived quality of cars deduced from car door sounds. A perceptual cartography of car door sounds is obtained from various listening tests aiming at revealing both ecological and analytical properties linked to evoked car quality. In the first test naive listeners performed absolute evaluations of five ecological properties (i.e., solidity, quality, weight, closure energy, and success of closure). Then experts in the area of automobile doors categorized the sounds according to organic constituents (lock, joints, door panel), in particular whether or not the lock mechanism could be perceived. Further, a sensory panel of naive listeners identified sensory descriptors such as classical descriptors or onomatopoeia that characterize the sounds, hereby providing an analytic description of the sounds. Finally, acoustic descriptors were calculated after decomposition of the signal into a lock and a closure component by the Empirical Mode Decomposition (EMD) method. A statistical relationship between the acoustic descriptors and the perceptual evaluations of the car door sounds could then be obtained through linear regression analysis.

  11. Blower-door techniques for measuring interzonal leakage

    Energy Technology Data Exchange (ETDEWEB)

    Hult, Erin L.; Sherman, Max H.; Walker, Iain

    2013-01-01

    Abstract The standard blower door test methods, such as ASTM E779, describe how to use a single blower door to determine the total leakage of a single-zone structure such as a detached single-family home. There are no standard test methods for measuring interzonal leakage in a two-zone or multi-zone building envelope such as might be encountered in with an attached garage or in a multifamily building. Some practitioners have been using techniques that involve making multiple measurements with a single blower door as well as combined measurements using multiple blower doors. Even for just two zones there are dozens of combinations of one-door and two-door test protocols that could conceivably be used to determine the interzonal air tightness. We examined many of these two-zone configurations using both simulation and measured data to estimate the accuracy and precision of each technique for realistic measurement scenarios. We also considered the impact of taking measurements at a single pressure versus over multiple pressures. We compared the various techniques and evaluated them for specific uses. Some techniques work better in one leakage regime; some are more sensitive to wind and other noise; some are more suited to determining only a subset of the leakage values. This paper makes recommendations on which techniques to use or not use for various cases and provides data that could be used to develop future test methods.

  12. Analysis of the quality of the whole journey (door-to-door) passenger expierence

    Energy Technology Data Exchange (ETDEWEB)

    Herrero Tomas, M.D.; Gonzalez Viosca, E.

    2016-07-01

    European cities increasingly face problems caused by transport and traffic. A key factor for all transport operators is the quality of the passenger experience as this particularly, affects the uptake of the service. A comprehensive study (METPEX FP7 EU project - www.metpex.eu) developed by a consortium of 16 European partners has analysed the quality of the whole journey (door-to-door) passenger experience, including private or individual forms transport and attending to specific need of users’ groups. For this purpose, a tool with a technological basis was used to collect data from 8 trial cities: Bucharest (Romania), Coventry (United Kingdom), Dublin (Ireland), Grevena (Greece), Rome (Italy), Stockholm (Sweden), Valencia (Spain) and Vilnius (Lithuania); and five FIA motorist networks countries. For a correct evaluation of quality experience, it was deployed a subset of key variables derived from the comprehensive set of potential satisfaction factors that were studied for each pilot city. In this paper, results of the travel experience are showed, including analysis of variables affecting behavior and feelings of passengers. (Author)

  13. 46 CFR 170.270 - Door design, operation, installation, and testing.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Door design, operation, installation, and testing. 170..., operation, installation, and testing. (a) Each Class 1 door must have a quick action closing device... the welding process so that the door frame is not distorted. (e) For each watertight door which is in...

  14. Components for containment enclosures - Part 3: Transfer systems such as plain doors, airlock chambers, double door transfer systems, leaktight connections for waste drums. 1. ed.

    International Nuclear Information System (INIS)

    1998-01-01

    This part of ISO 11933 specifies requirements for the selection, construction and use of the following leak tight components: doors, airlock chambers, double door transfer systems, leaktight connections for waste drums. Some of the elements, double doors or airlock chambers are described in ISO 11933-1 and ISO 11933-2 as well. Doors having bigger dimensions used for personnel od larger objects are not covered by this document

  15. SAFETY BULLETIN TIS 2002-03 GLASS DOORS

    CERN Multimedia

    2002-01-01

    Be careful! What happened?   Unsignaled reinforced glass.   Signaled safety glass.   A visitor recently hurt his leg when he walked into a glass door which shattered from the impact. This door was made of reinforced glass, a material which is inappropriate for this kind of use as it is too fragile. Indeed, it shatters into sharp splinters which can cause serious injury. Furthermore, the door was not easily visible (badly lit, no warning signs, ...). Corrective measures Just after the accident: glass doors were signed to make them more visible; replacement of dangerous glass panes planned for 2003. What preventive measures can be taken against this kind of accident? If you are in charge of projects and works: In the call for tender, specify the acceptable shock resistance level of the glass pane; Before the door is mounted, insist on receiving technical documentation and/or certificate of conformity from the supplier; If in doubt, ask advice from the TIS/GS sa...

  16. Understanding "revolving door" patients in general practice: a qualitative study.

    Science.gov (United States)

    Williamson, Andrea E; Mullen, Kenneth; Wilson, Philip

    2014-02-13

    'Revolving door' patients in general practice are repeatedly removed from general practitioners' (GP) lists. This paper reports a qualitative portion of the first mixed methods study of these marginalised patients. We conducted qualitative semi-structured interviews with six practitioner services staff and six GPs in Scotland, utilizing Charmazian grounded theory to characterise 'revolving door' patients and their impact from professionals' perspectives. 'Revolving door' patients were reported as having three necessary characteristics; they had unreasonable expectations, exhibited inappropriate behaviours and had unmet health needs. A range of boundary breaches were reported too when 'revolving door' patients interacted with NHS staff. We utilise the 'sensitising concepts' of legitimacy by drawing on literature about 'good and bad' patients and 'dirty work designations.' We relate these to the core work of general practice and explore the role that medical and moral schemas have in how health service professionals understand and work with 'revolving door' patients. We suggest this may have wider relevance for the problem doctor patient relationship literature.

  17. Improving Door-to-balloon Time by Decreasing Door-to-ECG time for Walk-in STEMI Patients

    Directory of Open Access Journals (Sweden)

    Coyne, Christopher J.

    2014-12-01

    Full Text Available Introduction: The American Heart Association/American College of Cardiology guidelines recommend rapid door-to-electrocardiography (ECG times for patients with ST-segment elevation myocardial infarction (STEMI. Previous quality improvement research at our institution revealed that we were not meeting this benchmark for walk-in STEMI patients. The objective is to investigate whether simple, directed changes in the emergency department (ED triage process for potential cardiac patients could decrease door-to-ECG times and secondarily door-to-balloon times. Methods: We conducted an interventional study at a large, urban, public teaching hospital from April 2010 to June 2012. All patients who walked into the ED with a confirmed STEMI were enrolled in the study. The primary intervention involved creating a chief complaint-based “cardiac triage” designation that streamlined the evaluation of potential cardiac patients. A secondary intervention involved moving our ECG technician and ECG station to our initial triage area. The primary outcome measure was door-to-ECG time and the secondary outcome measure was door-to-balloon time. Results: We enrolled 91 walk-in STEMI patients prior to the intervention period and 141 patients after the invention. We observed statistically significant reductions in door-to-ECG time (43±93 to 30±72 minutes, median 23 to 14 minutes p<0.01, ECG-to-activation time (87±134 to 52±82 minutes, median 43 to 31 minutes p<0.01, and door-to-balloon time (134±146 to 84±40 minutes, median 85 -75 minutes p=0.03. Conclusion: By creating a chief complaint-based cardiac triage protocol and by streamlining ECG completion, walk-in STEMI patients are systematically processed through the ED. This is not only associated with a decrease in door-to-balloon time, but also a decrease in the variability of the time sensitive intervals of door-to-ECG and ECG-to-balloon time. [West J Emerg Med. 2015;16(1:184–189.

  18. F-door spaces and F-submaximal spaces

    Directory of Open Access Journals (Sweden)

    Lobna Dridi

    2013-04-01

    Full Text Available Submaximal spaces and door spaces play an enigmatic role in topology. In this paper, reinforcing this role, we are concerned with reaching two main goals: The first one is to characterize topological spaces X such that F(X is a submaximal space (resp., door space for some covariant functor Ff rom the category Top to itself. T0, and FH functors are completely studied. Secondly, our interest is directed towards the characterization of maps f given by a flow (X, f in the category Set, such that (X,P(f is submaximal (resp., door where P(f is a topology on X whose closed sets are exactly the f-invariant sets.

  19. Confounding adjustment through front-door blocking in longitudinal studies

    Directory of Open Access Journals (Sweden)

    Arvid Sjölander

    2013-03-01

    Full Text Available A common aim of epidemiological research is to estimate the causal effect of a particular exposure on a particular outcome. Towards this end, observed associations are often ‘adjusted’ for potential confounding variables. When the potential confounders are unmeasured, explicit adjustment becomes unfeasible. It has been demonstrated that causal effects can be estimated even in the presence of umeasured confounding, utilizing a method called ‘front-door blocking’. In this paper we generalize this method to longitudinal studies. We demonstrate that the method of front-door blocking poses a number of challenging statistical problems, analogous to the famous problems associ- ated with the method of ‘back-door blocking’.

  20. Dynamic Object Oriented Requirements System (DOORS) System Test Plan

    International Nuclear Information System (INIS)

    JOHNSON, A.L.

    2000-01-01

    The U. S. Department of Energy, Office of River Protection (ORP) will use the Dynamic Object Oriented Requirements System (DOORS) as a tool to assist in identifying, capturing, and maintaining the necessary and sufficient set of requirements for accomplishing the ORP mission. By managing requirements as one integrated set, the ORP will be able to carry out its mission more efficiently and effectively. DOORS is a Commercial-Off-The-Shelf (COTS) requirements management tool. The tool has not been customized for the use of the PIO, at this time

  1. SPOT: the door to digital innovation

    International Nuclear Information System (INIS)

    Anon.

    2017-01-01

    AREVA NP has opened in Lyon a small department, named SPOT, whose aim is to develop innovative digital technologies such as CAVE and MODOP'3D. CAVE, that is the acronym of Cave Automatic Virtual Environment, is a large screen that splits the room in half and shows the virtual copy of the Astrid reactor. Viewers can wander inside the reactor and its building through the screen and sees all the details of the design. CAVE represents a complete virtual 3-dimension prototype of the Astrid reactor whose aim is to help assessing any change in the design. MODOP'3D is a virtual maintenance tool that allows the operator to simulate reactor maintenance operations in a 3-dimensional way in order to assess their feasibility and optimize them. Exoskeletons whose purpose is to help operators to handle heavy loads are also tested at SPOT. (A.C.)

  2. Genetic engineering. Rifkin's foot in the door.

    Science.gov (United States)

    Budiansky, S

    The U.S. Court of Appeals is considering a motion by the National Institutes of Health and the University of California, Berkeley, to lift a lower court ban on field trials of recombinant DNA organisms. Last spring, a U.S. District Court judge granted activist Jeremy Rifkin's request for an injunction and blocked NIH from approving any field trials of recombinant organisms without first furnishing an environmental impact statement. If the court requires NIH's Recombinant DNA Advisory Committee (RAC) to furnish an individual impact statement before each trial, Rifkin will have established that RAC's review procedures are subject to the National Environmental Policy Act, and possibly will have opened the way for routine court challenges of every RAC-approved field test.

  3. The effect of screening doors and windows on indoor density of Anopheles arabiensis in south-west Ethiopia: a randomized trial.

    Science.gov (United States)

    Massebo, Fekadu; Lindtjørn, Bernt

    2013-09-12

    Screening of houses might have impact on density of indoor host-seeking Anopheles mosquitoes. A randomized trial of screening windows and doors with metal mesh, and closing openings on eves and walls by mud was conducted to assess if reduce indoor densities of biting mosquitoes. Mosquitoes were collected in forty houses using Centers for Diseases Control and Prevention (CDC) light traps biweekly in March and April 2011. A randomization of houses into control and intervention groups was done based on the baseline data. Windows and doors of 20 houses were screened by metal mesh, and openings on the walls and eves closed by mud and the rest 20 houses were used as control group. Mosquitoes were collected biweekly in October and November 2011 from both control and intervention houses. A Generalized Estimating Equations (GEE) with a negative binomial error distribution was used to account for over dispersion of Anopheles arabiensis and culicine counts and repeated catches made in the same house. Screening doors and windows, and closing openings on eves and wall by mud reduced the overall indoor densities of An. arabiensis by 40%. The effect of screenings pronounced on unfed An. arabiensis by resulting 42% reduction in houses with interventions. The total costs for screening windows and doors, and to close openings on the eves and walls by mud was 7.34 USD per house. Screening houses reduced indoor density of An. arabiensis, and it was cheap and can easily incorporated into malaria vector strategies by local communities, but improving doors and windows fitness for screening should be considered during house construction to increase the efficacy of screenings.

  4. Bear at the back door | Prinsloo | Scientia Militaria: South African ...

    African Journals Online (AJOL)

    Scientia Militaria: South African Journal of Military Studies. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 9, No 3 (1979) >. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register. Bear at the back door. C Prinsloo ...

  5. Polychaete Anneliden verzameld door Het Rijksinstituut voor Biologisch Visscherijonderzoek

    NARCIS (Netherlands)

    Horst, R.

    1920-01-01

    Lepidonotus squamatus L. juv. Waarn. 134. Enkhuizerzand. 7 Febr. 1909. Zooals vroeger door mij aangetoond, is deze soort vrij gemeen in de Zuiderzee. Eunoa nodosa M. Sars. Waarn. 16. 55° 40' N.Br., 0° 50' W.L. 8 Maart 1914. Harmothoë (Evarne) impar (Johnst.). Waarn. 69. Molengat. 16 Oct. 1913. De

  6. Barcode van DNA. Democratisering van de taxonomie door digitaal identificatiesysteem

    NARCIS (Netherlands)

    Bakker, F.T.

    2011-01-01

    Het herkennen van biologische soorten aan de hand van een gestandaardiseerde DNA-barcode heeft de laatste tijd een enorme vlucht genomen. Gedreven door aan de ene kant de biodiversiteitscrises en de mogelijke global change, en aan de andere kant zowel razendsnelle technologische vooruitgang als ook

  7. Plantenkaartjes uitgegeven door het I.V.O.N

    NARCIS (Netherlands)

    NN,

    1959-01-01

    De serie door het I.V.O.N. gepubliceerde verspreidingskaartjes van Nederlandse plantensoorten is wederom verkrijgbaar. De prijzen zijn als volgt: afl. 1, 1935, 21 kaartjes van diverse soorten f. 1.35 afl. 2, 1936, 32 kaartjes van diverse soorten „ 2.00 afl. 3, 1936, 18 kaartjes van Potamogeton „

  8. Inclusie door interprofessionele samenwerking. : Resultaten van de proeftuinen van PACT.

    NARCIS (Netherlands)

    Doornenbal, Jeannette; Fukkink, Ruben; van Yperen, Tom; Balledux, Mariëlle; Spoelstra, Jolanda; Verseveld, Marloes

    2017-01-01

    Deze rapportage gaat over de resultaten van de PACT-proeftuinen waaraan in opdracht van Het Kinderopvangfonds van 2015 tot 2017 is gewerkt. PACT-proeftuinen zijn innovatieve praktijken waarin door middel van interprofessionele samenwerking tussen de kinderopvang, het basisonderwijs en de zorg wordt

  9. Door de ogen van de ander kijken: kunst als veranderkracht

    NARCIS (Netherlands)

    Smilde, Rineke

    2015-01-01

    Presentie gehouden bij een besloten expert meeting van de KNAW en de Boekmanstichting in Amsterdam. Door de ogen van de ander kijken: kunst als veranderkracht. Ik maak graag van de gelegenheid gebruik om iets te vertellen vanuit mijn werk als lector aan het PCC van de Hanzehogeschool Groningen.

  10. DE VERWOESTINGEN VAN BABYLON DOOR DARIUS I EN ...

    African Journals Online (AJOL)

    Test

    Het is alles behalve gemakkelijk deze bedreigingen in hun historisch verband te rangschikken. Bij een profetie als Jes. 21: „Gevallen, gevallen is Babel en al haar afgodsbeelden heeft. Hij ter aarde verbrijzeld”—zou men nog aan de eerste berichten kunnen denken, die Jeruzalem omtrent de verwoesting van Babylon door ...

  11. Portal: Your Door to World Languages and Cultures

    Science.gov (United States)

    Elliott, Don; Lawton, Rachele

    2009-01-01

    Portal: Your Door to World Languages and Cultures was a series of public cultural events, in a variety of formats, created through a new partnership between the credit and continuing education (noncredit) foreign language programs at the Community College of Baltimore County (CCBC). Portal was designed to cultivate interest in foreign languages…

  12. A Knock at the Door. The Oryx Multicultural Folktale Series.

    Science.gov (United States)

    Shannon, George, Comp.

    This folktales collection includes 35 versions, representing countries and cultures from around the world, of the traditional tale in which a dangerous character knocks at the door and tries to trick the children into letting him inside. The stories are intended for use in homes, schools, and libraries by both children and adults who enjoy sharing…

  13. DOORS English--The Cognitive Basis of Rhetorical Models.

    Science.gov (United States)

    Taylor, Karl K.

    1979-01-01

    The Development of Operational Reasoning Skills (DOORS) program at Illinois Central College is an interdisciplinary experiment that guides students from concrete to formal operational levels of thought to ensure that they understand the concepts and cognitive skills undergirding the rhetorical modes. (RL)

  14. A Study on the Modeling of the Oil Damper in an Auto-Door Hinge

    Energy Technology Data Exchange (ETDEWEB)

    Ha, Kwang Soon; Kim, Jong Tae; Kim, Hwan Yeol

    2009-11-15

    An auto-door hinge, which is one of the automatic door-closing apparatuses, has been widely used to prevent fire propagations in living or commercial buildings. The auto-door hinge consists of a spring to accumulate power for closing a door and an oil damper to control door-closing velocity. To predict and optimize the temporal door behavior during the door-closing period, the auto-door closing system was modeled as a second order-damping system. And a damping coefficient of the oil damper was also theoretically modeled by analyzing Newtonian, incompressible, viscous flow through an oil passage between a oil control rod and a oil piston body. The temporal door behaviors during the door-closing period were predicted with respect to the gap distance of the oil passage, oil viscosity, and pre-compressing of the spring. Temporal door behavior measurement method using an encoder system was also developed to validate the modelling on the oil damping system. As using the developed test apparatus, the temporal door position, velocity, and rotational torque were measured, and the modelling method was evaluated.

  15. A Study on the Modeling of the Oil Damper in an Auto-Door Hinge

    International Nuclear Information System (INIS)

    Ha, Kwang Soon; Kim, Jong Tae; Kim, Hwan Yeol

    2009-11-01

    An auto-door hinge, which is one of the automatic door-closing apparatuses, has been widely used to prevent fire propagations in living or commercial buildings. The auto-door hinge consists of a spring to accumulate power for closing a door and an oil damper to control door-closing velocity. To predict and optimize the temporal door behavior during the door-closing period, the auto-door closing system was modeled as a second order-damping system. And a damping coefficient of the oil damper was also theoretically modeled by analyzing Newtonian, incompressible, viscous flow through an oil passage between a oil control rod and a oil piston body. The temporal door behaviors during the door-closing period were predicted with respect to the gap distance of the oil passage, oil viscosity, and pre-compressing of the spring. Temporal door behavior measurement method using an encoder system was also developed to validate the modelling on the oil damping system. As using the developed test apparatus, the temporal door position, velocity, and rotational torque were measured, and the modelling method was evaluated

  16. 16 CFR 1211.13 - Inherent force activated secondary door sensors.

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Inherent force activated secondary door sensors. 1211.13 Section 1211.13 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT... across the door so that the axis is perpendicular to the plane of the door. See Figure 6 of this part...

  17. Door locking and exit security measures on acute psychiatric admission wards

    NARCIS (Netherlands)

    Nijman, H.L.I.; Bowers, L.; Haglund, K.; Muir-Cochrane, E.; Simpson, A.; Merwe, M. van der

    2011-01-01

    Locking the exit doors of psychiatric wards is believed to reduce the risk of patients absconding. The aims of the study were to investigate both the prevalence of door locking and other exit security measures on UK admission wards, as well as whether door locking appears to be effective in keeping

  18. Intelligent Vision System for Door Sensing Mobile Robot

    Directory of Open Access Journals (Sweden)

    Jharna Majumdar

    2012-08-01

    Full Text Available Wheeled Mobile Robots find numerous applications in the Indoor man made structured environments. In order to operate effectively, the robots must be capable of sensing its surroundings. Computer Vision is one of the prime research areas directed towards achieving these sensing capabilities. In this paper, we present a Door Sensing Mobile Robot capable of navigating in the indoor environment. A robust and inexpensive approach for recognition and classification of the door, based on monocular vision system helps the mobile robot in decision making. To prove the efficacy of the algorithm we have designed and developed a ‘Differentially’ Driven Mobile Robot. A wall following behavior using Ultra Sonic range sensors is employed by the mobile robot for navigation in the corridors.  Field Programmable Gate Arrays (FPGA have been used for the implementation of PD Controller for wall following and PID Controller to control the speed of the Geared DC Motor.

  19. Ervaringen van schaamte en psychologisch lijden door voedselbankklanten

    Directory of Open Access Journals (Sweden)

    Hille Hoogland

    2016-03-01

    men and 27 women. The interviews were transcribed verbatim and analysed in Atlas.ti by two researchers, using attribute and structural coding.Our results show that foodbank clients use a combination of different strategies to cope with living on tight budgets. Most of them save money on food, non-food and social activities. Another strategy is to ask for support from family or friends for money, clothing or food. Some respondents are almost completely dependent on gifts from friends and the food parcel and some also reported being restricted in their social life and having lost friends. We found that lack of money is related to psychological suffering: sleeplessness, stress, fear, panic, depression and feelings of sadness. The causes mentioned for this suffering were: debts, persistent letters from creditors, and not being able to afford consumer goods and/or activities. Some respondents reported seeking to numb these feelings through the use of alcohol or cannabis. Others avoided opening letters or answering telephone calls.In the interviews, foodbank clients expressed their feelings about their situation. Shame was the most frequently mentioned emotion and related to the label of “foodbank client”, the working method of the foodbank or not being able to consume what they wanted to. Firstly, respondents felt ashamed about being a foodbank client, because this is not acceptable in their social and cultural environment, and there is a negative stigma associated with being a foodbank client rather than a “normal working citizen”. Some of the respondents try to hide the fact that they use a foodbank, while others stated that they liked to form friendships with other foodbank clients because they would be more likely to accept and understand them. Another reaction was to downplay the situation. Secondly, shame was connected to the way that the foodbank operates. Clients feel ashamed to have to show their administration in the assessment interview before they can

  20. Flow of pedestrians through narrow doors with different competitiveness

    International Nuclear Information System (INIS)

    Garcimartín, A; Pastor, J M; Zuriguel, I; Parisi, D R; Martín-Gómez, C

    2016-01-01

    We report a thorough analysis of the intermittent flow of pedestrians through a narrow door. The observations include five different sets of evacuation drills with which we have investigated the effect of door size and competitiveness on the flow dynamics. Although the outcomes are in general compatible with the existence of the faster-is-slower effect, the temporal evolution of the instantaneous flow rate provides evidence of new features. These stress the crucial role of the number of people performing the tests, which has an influence on the obtained results. Once the transients at the beginning and end of the evacuation are removed, we have found that the time lapses between the passage of two consecutive pedestrians display heavy-tailed distributions in all the scenarios studied. Meanwhile, the distribution of burst sizes decays exponentially; this can be linked to a constant probability of finding a long-lasting clog during the evacuation process. Based on these results, a discussion is presented on the caution that should be exercised when measuring or describing the intermittent flow of pedestrians through narrow doors. (paper: interdisciplinary statistical mechanics)

  1. Double seal door design and analysis for ITER transfer cask

    International Nuclear Information System (INIS)

    Liu, C.L.; Yao, D.M.; Cheng, T.

    2007-01-01

    DSD (Double seal door) design concept was introduced. 3-D model work was performed for DSD in the three typical regions, such as upper port, equatorial port, divertor port. The numerical analysis for some typical components was done based on Finite Element (FE) method by using ANSYS code, especially for the optimization activities. The rescue procedures of the DSD was discussed which could benefit a little for future engineering implementation. The design and analysis work can support and be the important reference for future procurement. (authors)

  2. Container lid gasket protective strip for double door transfer system

    Science.gov (United States)

    Allen, Jr., Burgess M

    2013-02-19

    An apparatus and a process for forming a protective barrier seal along a "ring of concern" of a transfer container used with double door systems is provided. A protective substrate is supplied between a "ring of concern" and a safety cover in which an adhesive layer of the substrate engages the "ring of concern". A compressive foam strip along an opposite side of the substrate engages a safety cover such that a compressive force is maintained between the "ring of concern" and the adhesive layer of the substrate.

  3. Identification of persons entering through the door from the accelerometers data

    OpenAIRE

    Vodopivec, Tadej

    2013-01-01

    This thesis presents a system for automatic identification of a person who walks through a door based on the information gathered with acceleration sensors, which are mounted on the door. The proccedure for automatic identification consists of four steps. In the first step, data acquisition and coordinate system rotation is performed. Coordinate system rotation is needed in order to match the direction of measured accelerations with the direction of components of the forces acting on the door...

  4. Social Media: Opening New Doors for the Domestic Tourism Industry in Albania

    OpenAIRE

    Vjollca Hysi; Klodiana Gorica; Sokol Luzi

    2015-01-01

    The online word is becoming every day more and more important for the tourism industry. Through different technologies, it has made the possibility to ease the way people search and decide for their own travel destination, the way they pick their accommodation and their traveling medium. In particular the online social media, as part of the online word, has created new opportunities for interaction and communication between people. Today individuals have the opportunity to share ...

  5. PM₂.₅ opened a door to public participation addressing environmental challenges in China.

    Science.gov (United States)

    Huang, Ganlin

    2015-02-01

    China has long been regarded as a centralized society where the public has little influence on decision-making. Such a top-down management scheme is perceived as a major obstacle to address complicated environment issues. The recent public campaign in China to urge creation of a nationwide PM₂.₅ monitoring network and mitigation plan provides an unprecedented case of how the public participated and influenced policy-making in a centralized society. This paper reviews key incidents in the campaign chronologically. Here we identify information technology, public awareness of air quality's health impacts and the fact air quality affects everyone as public goods as the major factors promoting public participation. This case demonstrates that public participation can happen in a centralized, top-down society such as China. Continued environmental deterioration may stimulate similar campaigns for other issues. We anticipate this essay to be a starting point for more studies on how environmental issues stimulate incremental social change by making people involved in decision-making process, especially in societies where they are rarely able to do so. Copyright © 2014 Elsevier Ltd. All rights reserved.

  6. Secure Borders and Open Doors: Preserving Our Welcome to the World in an Age of Terrorism

    Science.gov (United States)

    2008-01-01

    81 In October 2007, the Walt Disney Company presented State and DHS with a “Welcome to America” video now being displayed at CA posts and Model...airports council international-north america, Co-Chair, Ports of Entry Working Group James (Jay) Rasulo, chairman, walt disney parks and resorts...SBodac members and additional subject matter experts who were consulted. among the many who provided such assistance were: Bill Bailey, walt disney

  7. NGVS. Challenges for the Japanese gas industry to open the door for their mass introduction

    International Nuclear Information System (INIS)

    Akimoto, Minoru; Kawamoto, Hiroshi; Suzuki, Tatsuya; Yamaguchi, Eiji

    1997-01-01

    There have been a number of restraints in Japan delaying the introduction of natural gas vehicles (NGVs), which is a new comer in car industry. The Japanese gas industry, with support from government agencies, has conducted feasibility studies and clarified necessary technical and safety standards and regulations. These efforts have contributed to the government's drive for deregulation. Concurrently, the gas industry worked out its own scenarios for the promotion of NGVs in Japan, which helped the government in laying down necessary regulations and establishing clear market objectives for the vehicles as government policies. Such activities have yielded model introduction by the national and local governments and government-sponsored incentives for NGV promotion. For auto manufacturers, the gas industry proposed joint development projects and clarified potential market for NGVs. Consequently, many manufactures are now involved in their own NGV development projects. (au)

  8. Art and science in health care research: pushing at open doors or locked in institutions?

    Science.gov (United States)

    Freshwater, Dawn; Cahill, Jane; Walsh, Elizabeth; Muncey, Tessa; Esterhuizen, Philip

    2012-09-01

    Research methods are usually dictated and driven by the research question. In the context of research in "closed" systems--for example, offender health settings--it is imperative that the research question takes into consideration the context in which the research is located. Conducting research that has action, transformation, and creativity at its heart is a significant challenge in closed cultures, for both the researcher and the researched. Using two exemplars, we question whether researchers should adopt a safe approach to researching these closed cultures and to what extent they should engage in methodological tensions and ethical dilemmas that provoke and support reflection on change. By reflecting on our previous research studies, we aim not so much to provide a definitive answer to this question but to suggest that researchers give careful consideration to the methods appropriate to both the context of the research and its purpose.

  9. Video Conferencing for Opening Classroom Doors in Initial Teacher Education: Sociocultural Processes of Mimicking and Improvisation

    Directory of Open Access Journals (Sweden)

    Rolf Wiesemes

    2010-11-01

    Full Text Available In this article, we present an alternative framework for conceptualising video-conferencing uses in initial teacher education and in Higher Education (HE more generally. This alternative framework takes into account the existing models in the field, but – based on a set of interviews conducted with teacher trainees and wider analysis of the related literature – we suggest that there is a need to add to existing models the notions of ‘mimicking’ (copying practice and improvisation (unplanned and spontaneous personal learning moments. These two notions are considered to be vital, as they remain valid throughout teachers’ careers and constitute key affordances of video-conferencing uses in HE. In particular, we argue that improvisational processes can be considered as key for developing professional practice and lifelong learning and that video-conferencing uses in initial teacher education can contribute to an understanding of training and learning processes. Current conceptualisations of video conferencing as suggested by Coyle (2004 and Marsh et al. (2009 remain valid, but also are limited in their scope with respect to focusing predominantly on pragmatic and instrumental teacher-training issues. Our article suggests that the theoretical conceptualisations of video conferencing should be expanded to include elements of mimicking and ultimately improvisation. This allows us to consider not just etic aspects of practice, but equally emic practices and related personal professional development. We locate these arguments more widely in a sociocultural-theory framework, as it enables us to describe interactions in dialectical rather than dichotomous terms (Lantolf & Poehner, 2008.

  10. The U.S. Rebalance and Europe: Convergent Strategies Open Doors to Improved Cooperation

    Science.gov (United States)

    2014-06-01

    Rota- tional Force in Darwin , Australia, and forward-basing of Littoral Combat Ships in Singapore—risk sending the wrong signal to China and U.S...On occasion they have been controversial trail- 7 The U.S. “Rebalance” and Europe blazers in that regard—for example, when President Charles de...carrier Charles de Gaulle and Indian naval units.17 9 The U.S. “Rebalance” and Europe The French are active in other parts of Asia as well. Paris maintains

  11. Training adaptation and heart rate variability in elite endurance athletes: opening the door to effective monitoring.

    Science.gov (United States)

    Plews, Daniel J; Laursen, Paul B; Stanley, Jamie; Kilding, Andrew E; Buchheit, Martin

    2013-09-01

    The measurement of heart rate variability (HRV) is often considered a convenient non-invasive assessment tool for monitoring individual adaptation to training. Decreases and increases in vagal-derived indices of HRV have been suggested to indicate negative and positive adaptations, respectively, to endurance training regimens. However, much of the research in this area has involved recreational and well-trained athletes, with the small number of studies conducted in elite athletes revealing equivocal outcomes. For example, in elite athletes, studies have revealed both increases and decreases in HRV to be associated with negative adaptation. Additionally, signs of positive adaptation, such as increases in cardiorespiratory fitness, have been observed with atypical concomitant decreases in HRV. As such, practical ways by which HRV can be used to monitor training status in elites are yet to be established. This article addresses the current literature that has assessed changes in HRV in response to training loads and the likely positive and negative adaptations shown. We reveal limitations with respect to how the measurement of HRV has been interpreted to assess positive and negative adaptation to endurance training regimens and subsequent physical performance. We offer solutions to some of the methodological issues associated with using HRV as a day-to-day monitoring tool. These include the use of appropriate averaging techniques, and the use of specific HRV indices to overcome the issue of HRV saturation in elite athletes (i.e., reductions in HRV despite decreases in resting heart rate). Finally, we provide examples in Olympic and World Champion athletes showing how these indices can be practically applied to assess training status and readiness to perform in the period leading up to a pinnacle event. The paper reveals how longitudinal HRV monitoring in elites is required to understand their unique individual HRV fingerprint. For the first time, we demonstrate how increases and decreases in HRV relate to changes in fitness and freshness, respectively, in elite athletes.

  12. Cell Culture in Microgravity: Opening the Door to Space Cell Biology

    Science.gov (United States)

    Pellis, Neal R.; Dawson, David L. (Technical Monitor)

    1999-01-01

    Adaptational response of human cell populations to microgravity is investigated using simulation, short-term Shuttle experiments, and long-term microgravity. Simulation consists of a clinostatically-rotated cell culture system. The system is a horizontally-rotated cylinder completely filled with culture medium. Low speed rotation results in continuous-fall of the cells through the fluid medium. In this setting, cells: 1) aggregate, 2) propagate in three dimensions, 3) synthesize matrix, 4) differentiate, and 5) form sinusoids that facilitate mass transfer. Space cell culture is conducted in flight bioreactors and in static incubators. Cells grown in microgravity are: bovine cartilage, promyelocytic leukemia, kidney proximal tubule cells, adrenal medulla, breast and colon cancer, and endothelium. Cells were cultured in space to test specific hypotheses. Cartilage cells were used to determine structural differences in cartilage grown in space compared to ground-based bioreactors. Results from a 130-day experiment on Mir revealed that cartilage grown in space was substantially more compressible due to insufficient glycosaminoglycan in the matrix. Interestingly, earth-grown cartilage conformed better to the dimensions of the scaffolding material, while the Mir specimens were spherical. The other cell populations are currently being analyzed for cell surface properties, gene expression, and differentiation. Results suggest that some cells spontaneously differentiate in microgravity. Additionally, vast changes in gene expression may occur in response to microgravity. In conclusion, the transition to microgravity may constitute a physical perturbation in cells resulting in unique gene expressions, the consequences of which may be useful in tissue engineering, disease modeling, and space cell biology.

  13. Opening Doors of Opportunity to Develop the Future Nuclear Workforce - 13325

    International Nuclear Information System (INIS)

    Mets, Mindy

    2013-01-01

    The United States' long-term demand for highly skilled nuclear industry workers is well-documented by the Nuclear Energy Institute. In addition, a study commissioned by the SRS Community Reuse Organization concludes that 10,000 new nuclear workers are needed in the two-state region of Georgia and South Carolina alone. Young adults interested in preparing for these nuclear careers must develop specialized skills and knowledge, including a clear understanding of the nuclear workforce culture. Successful students are able to enter well-paying career fields. However, the national focus on nuclear career opportunities and associated training and education programs has been minimal in recent decades. Developing the future nuclear workforce is a challenge, particularly in the midst of competition for similar workers from various industries. In response to regional nuclear workforce development needs, the SRS Community Reuse Organization established the Nuclear Workforce Initiative (NWI R ) to promote and expand nuclear workforce development capabilities by facilitating integrated partnerships. NWI R achievements include a unique program concept called NWI R Academies developed to link students with nuclear career options through firsthand experiences. The academies are developed and conducted at Aiken Technical College and Augusta Technical College with support from workforce development organizations and nuclear employers. Programs successfully engage citizens in nuclear workforce development and can be adapted to other communities focused on building the future nuclear workforce. (authors)

  14. Opening Doors of Opportunity to Develop the Future Nuclear Workforce - 13325

    Energy Technology Data Exchange (ETDEWEB)

    Mets, Mindy [Nuclear Workforce Initiative Program, SRS Community Reuse Organization, P.O. Box 696, Aiken, SC 29802 (United States)

    2013-07-01

    The United States' long-term demand for highly skilled nuclear industry workers is well-documented by the Nuclear Energy Institute. In addition, a study commissioned by the SRS Community Reuse Organization concludes that 10,000 new nuclear workers are needed in the two-state region of Georgia and South Carolina alone. Young adults interested in preparing for these nuclear careers must develop specialized skills and knowledge, including a clear understanding of the nuclear workforce culture. Successful students are able to enter well-paying career fields. However, the national focus on nuclear career opportunities and associated training and education programs has been minimal in recent decades. Developing the future nuclear workforce is a challenge, particularly in the midst of competition for similar workers from various industries. In response to regional nuclear workforce development needs, the SRS Community Reuse Organization established the Nuclear Workforce Initiative (NWI{sup R}) to promote and expand nuclear workforce development capabilities by facilitating integrated partnerships. NWI{sup R} achievements include a unique program concept called NWI{sup R} Academies developed to link students with nuclear career options through firsthand experiences. The academies are developed and conducted at Aiken Technical College and Augusta Technical College with support from workforce development organizations and nuclear employers. Programs successfully engage citizens in nuclear workforce development and can be adapted to other communities focused on building the future nuclear workforce. (authors)

  15. Opening the stable door: new initiatives at the Petrie Museum of Egyptian Archaeology

    Directory of Open Access Journals (Sweden)

    Sally MacDonald

    2000-11-01

    Full Text Available The Petrie Museum ut UCL contains u world-class collection of Egyptian objects that ranges chronologically from early prehistoric to Islamic times, but it is inadequately housed and remains little known outside Egyptology. It has now been designated us of national importance and its stuff have ambitious plans to provide greater access, via the Internet and in other ways, to the 80000 objects it contains.

  16. National capacity mechanisms in the European internal energy market: Opening the doors to neighbours

    International Nuclear Information System (INIS)

    Mastropietro, Paolo; Rodilla, Pablo; Batlle, Carlos

    2015-01-01

    After decades of strong opposition, several European countries are now in the process of implementing some kind of Capacity Remuneration Mechanism (CRM). Unfortunately, these national initiatives seem to aim at energy autarky rather than seeking a wider regional coordination. This situation can significantly affect the potential benefits of an integrated long-term expansion of the European power system. In this paper the regulatory basis for the effective participation of foreign agents in national CRMs is discussed. The authors support that two pillars are required: (1) stronger coordination among TSOs and respect for the Security of Supply Directive and (2) introduce a particular type of firm cross-border nominations associated to the CRMs commitments. These proposed nominations are to be considered only in situations of system stress. As discussed here, this allows not requiring any type of ex-ante cross-border capacity reservation, thus avoiding many of the inefficiencies associated to traditional physical bilateral contracts. -- Highlights: •We discuss the regulatory basis for the effective participation of foreign agents in national CRMs. •Stronger coordination among TSOs and respect for the Security of Supply Directive is required. •A new type of firm cross-border nominations linked to the CRMs commitments should be introduced. •These proposed nominations are to be considered only in situations of system stress. •No ex-ante cross-border capacity reservation would be needed

  17. On the gate of Arctic footsteps: Doors open to foreign high schools

    Science.gov (United States)

    Manno, C.; Pecchiar, I.

    2012-12-01

    With the increased attention on the changing Arctic Region effective science education, outreach and communication need to be higher priorities within the scientific communities. In order to encourage the dissemination of polar research at educational levels foreign high school students and teachers were visiting Tromso University for a week. The project highlights the role of the universities as link between research and outreach. The first aim of this project was to increase awareness of foreign schools on major topics concerning the Arctic issues (from the economic/social to the environmental/climatic point of view). Forty three Italian high school students were involved in the laboratory activities running at the UiT and participated in seminars. Topics of focus were Ocean Acidification, Global Warming and the combined effects with other anthropogenic stressors. During their stay, students interviewed several scientists in order to allow them to edit a "visiting report" and to elaborate all the material collected. Back in Italy they performed an itinerant exhibition (presentation of a short movie, posters, and pictures) in various Italian schools in order to pass on their Arctic education experience. The project highlights the role of University as communicator of "climate related issues" in the international frame of the "new generation" of students.

  18. Examining the British PhD viva: opening new doors or scarring for life?

    Science.gov (United States)

    Carter, Bernie; Whittaker, Karen

    2009-01-01

    The PhD viva -- regardless of its format -- has the potential to be a significant rite of passage for the student. It is an experience that can resonate for months or years afterwards. Part of the challenge is that for everyone involved -- student, supervisory team and examiners -- a degree of end-point uncertainty exists. These ambiguities and tensions are perhaps an inherent part of any examination but are particularly characteristic of the examination of the individual and unique body of work that constitutes the doctoral thesis. In recent years, increased attention has been placed on the processes that surround the examination, aiming to increase transparency, consistency and fairness. However, the process of examining a student and their thesis remains challenging and is surrounded by different agendas, ideologies and practices. This paper examines some of the issues surrounding the PhD viva, primarily focusing on the British viva whilst weaving in commentary about the Australian system.

  19. Opening the Door: How Community Organizations Address the Youth Unemployment Crisis. Executive Summary

    Science.gov (United States)

    Steinberg, Adria; Almeida, Cheryl

    2015-01-01

    Few Americans know the importance of community-based organizations, or CBOs, in helping tens of thousands of undereducated, underemployed young people find a job or go back to school. But the role of CBOs is growing more critical as the business, education, and philanthropic sectors increasingly recognize the need to enable the nation's millions…

  20. Opening the Door: How Community Organizations Address the Youth Unemployment Crisis

    Science.gov (United States)

    Steinberg, Adria; Almeida, Cheryl

    2015-01-01

    At this moment, the role of community-based organizations (CBOs) has never been more important. The country is facing a dual crisis in youth unemployment and low postsecondary completion rates. Both are especially prevalent among low-income and minority young people. Across the nation, nearly 7 million young people are neither in school nor part…

  1. Oil and gas in China: The door opens wider to international oil companies

    International Nuclear Information System (INIS)

    Tao, Wang

    1993-01-01

    This paper reviews new incentives offered by the China National Petroleum Corporation to help develop China's oil and gas fields. The initial offer for bids by foreign investors is for exploration and joint development contracts for western China's Tarim basin. However, the expansion to other basins and areas of China is well underway. It also discusses a pipeline project which will be connect the western China oil and gas fields with the eastern markets, approximately 2,200 miles. A historical review of the oil and gas production and utilization of China is presented along with forecasts of future production. It also provides estimates of gas and oil reserves and information on enhanced recovery techniques used to maintain a stable production level. The second half of the paper is an interview with Dr. Wang Tao, a PhD graduate of Moscow's Petroleum Institute, and president of the China National Petroleum Corporation. He reviews the government policies with regards to foreign investment in his country

  2. Major unsolved points in adult neurogenesis: doors open on a translational future?

    Directory of Open Access Journals (Sweden)

    Paolo ePeretto

    2014-06-01

    Full Text Available The ultimate goal of exploiting adult neurogenesis (AN as a source of cell replacement is far from being achieved. In spite of many data gathered during the last two decades on homeostatic and reactive neurogenesis, it is evident that such knowledge is not sufficient for granting translational outcomes. By asking the question whether AN research field has to be considered as a dead end in such a perspective, here we review some major unresolved issues: multifaceted evolutionary constraints emerged in mammals, stem/progenitor cell type/availability and tissue permissivity, the possible impact on other brain functions and/or interplay with other forms of plasticity, and relevance in humans. We suggest that full understanding of AN biological processes is an essential step to their possible exploitation for brain repair, and that further fundamental, multidisciplinary research is required before translational outcomes can be reached. Scientist's attitude and their communication skills are also important. To avoid overestimation of AN reparative potential, more distant goals of cell replacement should be kept clearly distinct from restorative approaches involving AN plasticity, both representing translational perspectives.

  3. Opening the Doors to Medical Education from the Victorian Era to the Present.

    Science.gov (United States)

    Tom, Stephen C.

    1997-01-01

    Analyzes three distinct periods that characterize women's efforts to become successful physicians: the Victorian era, the first 70 years of the 1900s, and the past twenty years. Compares social, historical, and scientific factors which have affected the number of enrollments and graduations by women. (EMK)

  4. A Reggio-Inspired Music Atelier: Opening the Door between Visual Arts and Music

    Science.gov (United States)

    Hanna, Wendell

    2014-01-01

    The Reggio Emilia approach is based on the idea that every child has at least, "one hundred languages" available for expressing perspectives of the world, and one of those languages is music. While all of the arts (visual, music, dance, drama) are considered equally important in Reggio schools, the visual arts have been particularly…

  5. The three keys to quality customer service: opening the doors to exceptional performance.

    Science.gov (United States)

    Myers, Pennie; Nance, Don W

    2002-01-01

    Excellence in customer service requires three things. The first is a commitment to a set of principles. These principles reflect beliefs and assumptions that people are valuable and deserve to be treated with dignity and respect. This commitment is expressed to customers by an adherence to six customer-friendly processes and by personnel who possess a high level of skill in the behaviors that make up customer service. When these three requirements are met, laboratorians not only maintain a competitive edge but also fulfill their mission as health-care professionals.

  6. Social Media: Opening New Doors for the Domestic Tourism Industry in Albania

    Directory of Open Access Journals (Sweden)

    Vjollca Hysi

    2015-04-01

    Full Text Available The online word is becoming every day more and more important for the tourism industry. Through different technologies, it has made the possibility to ease the way people search and decide for their own travel destination, the way they pick their accommodation and their traveling medium. In particular the online social media, as part of the online word, has created new opportunities for interaction and communication between people. Today individuals have the opportunity to share knowledge, opinions and experiences through online communication. Also their impact goes even further by influencing the behavior of other users in the process of buying. This article will be focused on the usage of Facebook social media platform, arranging a content analysis regarding the different social media tools to engage and interact. This will serve as small step in understanding how domestic business and tourism industry are using social platforms to engage more users and increase their business performance.

  7. Tendances Carbone no. 76 'Doha opens partway the door to shift to -25% for the EU'

    International Nuclear Information System (INIS)

    Morel, Romain; Leguet, Benoit

    2013-01-01

    Among the publications of CDC Climat Research, 'Tendances Carbone' bulletin specifically studies the developments of the European market for CO 2 allowances. This issue addresses the following points: The Doha Conference in Qatar followed two conferences that yielded relatively significant results, namely Cancun (2010) and Durban (2011). These previous conferences had most notably agreed on a second commitment period for the Kyoto Protocol (KP-CP2), begun a negotiation process aimed at achieving an international post-2020 agreement, as well as furthered progress on the issue of financing. The aim of the Doha Conference was therefore to provide a link between the process drawn up by the Bali Road-map (2007) and the one launched in Durban in 2011, with the aim of arriving at an international post-2020 agreement. In the end, the Doha Conference enabled the definition of the rules of the second period of the Kyoto protocol and provided direction for a global agreement in 2015, but was however unable to give a strong signal on the issue of funding

  8. Battlefield acupuncture: Opening the door for acupuncture in Department of Defense/Veteran's Administration health care.

    Science.gov (United States)

    Walker, Patricia Hinton; Pock, Arnyce; Ling, Catherine G; Kwon, Kyung Nancy; Vaughan, Megan

    2016-01-01

    Battlefield acupuncture is a unique auricular acupuncture procedure which is being used in a number of military medical facilities throughout the Department of Defense (DoD). It has been used with anecdotal published positive impact with warriors experiencing polytrauma, post-traumatic stress disorder, and traumatic brain injury. It has also been effectively used to treat warriors with muscle and back pain from carrying heavy combat equipment in austere environments. This article highlights the history within the DoD related to the need for nonpharmacologic/opioid pain management across the continuum of care from combat situations, during evacuation, and throughout recovery and rehabilitation. The article describes the history of auricular acupuncture and details implementation procedures. Training is necessary and partially funded through DoD and Veteran's Administration (VA) internal Joint Incentive Funds grants between the DoD and the VA for multidisciplinary teams as part of a larger initiative related to the recommendations from the DoD Army Surgeon General's Pain Management Task Force. Finally, Uniformed Services University of the Health Sciences School of Medicine and Graduate School of Nursing faculty members present how this interdisciplinary training is currently being integrated into both schools for physicians and advanced practice nurses at the Uniformed Services University of the Health Sciences. Current and future research challenges and progress related to the use of acupuncture are also presented. Published by Elsevier Inc.

  9. Early Intervention Programs: Opening the Door to Higher Education. ERIC Digest.

    Science.gov (United States)

    Fenske, Robert H.; Geranios, Christine A.; Keller, Jonathan E.; Moore, David E.

    This digest summarizes a larger document of the same title which examines early intervention programs providing services and resources to encourage low-income/minority youth to finish high school and enter college. It notes provisions of federal law which encourage such programs and the unifying mission of the National Early Intervention…

  10. Portal to the World: AIHEC Virtual Library Opens Doors for Native Research

    Science.gov (United States)

    Kirby, Jane

    2004-01-01

    The Internet keeps growing at lightning speed. Now, "tribal college" students have a tool to assist them in locating accurate information quickly: the American Indian Higher Education Consortium (AIHEC) Virtual Library. The AIHEC Virtual Library provides a focused entryway into the Internet research field. Librarians report that it supplements…

  11. Braudel and Abrams open the door to an insoluble debate: The City

    Directory of Open Access Journals (Sweden)

    Tomás Antônio Moreira

    2016-08-01

    Full Text Available This paper looks to understand the definitions of the city to enrich the new reflections, in the current days. The starting point for reflection is the confrontation of positions in the understanding of the urban phenomenon, the city, by Fernand Braudel and Philip Abrams, later to emerge in front of the dilemma posed in the confrontation of these two authors, samplings of the main elaborate theorizing on City. Among the findings, it is emphasized that the names of propositions about the city seeking to account for the dynamic evolution of human settlements: métapole, edge city and tecnocity.

  12. Opening the Classroom Door: Professional Learning Communities in the Math and Science Partnership Program

    Science.gov (United States)

    Hamos, James E.; Bergin, Kathleen B.; Maki, Daniel P.; Perez, Lance C.; Prival, Joan T.; Rainey, Daphne Y.; Rowell, Ginger H.; VanderPutten, Elizabeth

    2009-01-01

    This article looks at how professional learning communities (PLCs) have become an operational approach for professional development with potential to de-isolate the teaching experience in the fields of science, technology, engineering, and mathematics (STEM). The authors offer a short synopsis of the intellectual origins of PLCs, provide multiple…

  13. Keeping the door open: Exploring experiences of, and responses to, university students who disclose mental illness

    Directory of Open Access Journals (Sweden)

    Donna McAuliffe

    2012-06-01

    Full Text Available University educators increasingly manage situations where students disclose serious mental health issues. This is a significant issue, particularly for health and human service professions, as the importance of valuing the lived experience of mental illness lies alongside concerns for professional practice standards. Thus the responsibilities of students to disclose their mental health status and the responsibilities of Universities to provide appropriate support within established disability frameworks must be clear. However, students often do not know who they should disclose to, what will happen to disclosed information, and who has access to this information. Student's often fear embarrassment, stigma, and shame about disclosing mental illness, which is compounded by the diverse attitudes, experiences, and beliefs of educators. Consequently, this paper will review existing literature on university responses to, and students’ experiences of, mental illness in order to set a research agenda for this topic. The authors argue that such research must be undertaken urgently, in a context of inclusivity in higher education that gives voice to the experiences of students, their families and carers, university staff, and practitioners in the field.

  14. Opening the Door to Zero New HIV Infections in Closed Settings

    OpenAIRE

    Torriente, Anna; Tadion, Alexander; Hsu, Lee-Nah

    2016-01-01

    Abstract Prisons and other closed settings are high-risk environments for HIV and tuberculosis (TB) transmission. Prisoners often experience overcrowded living conditions and violence?including sexual assault?increasing their vulnerability to HIV and TB. However, high infection rates in prisons affect both prisoners and prison employees. Both groups, in interacting with their families and their communities, represent a potential risk of HIV transmission outside the prison setting. National HI...

  15. Opening the Door to Zero New HIV Infections in Closed Settings.

    Science.gov (United States)

    Torriente, Anna; Tadion, Alexander; Hsu, Lee-Nah

    2016-06-01

    Prisons and other closed settings are high-risk environments for HIV and tuberculosis (TB) transmission. Prisoners often experience overcrowded living conditions and violence-including sexual assault-increasing their vulnerability to HIV and TB. However, high infection rates in prisons affect both prisoners and prison employees. Both groups, in interacting with their families and their communities, represent a potential risk of HIV transmission outside the prison setting. National HIV and TB strategies should therefore include measures to prevent transmission and increase access to HIV-related services in prisons. Courts have progressively recognized the human rights of prisoners, including the right to health and access to HIV-related services. A number of national and regional court decisions have affirmed that prison authorities have a duty of care to prisoners and an obligation to ensure that prisoners have access to HIV prevention measures and treatment. Policies and programs on HIV, AIDS, and TB for prison workplaces that are aligned with the ILO's international labor standards can benefit both prisoners and prison employees. In particular, the ILO's HIV and AIDS Recommendation, 2010 (No. 200) affirms the principle of universal access to HIV services and provides guidance for the HIV/TB response in prison settings.

  16. Una puerta abierta a la profesionalidad pedagógica A door opened to pedagogical proficiency

    Directory of Open Access Journals (Sweden)

    Sonia Socarrás Sánchez

    2006-04-01

    Full Text Available Este trabajo es una experiencia pedagógica que se desarrolla en el Instituto Superior de Ciencias Médicas de Camagüey, se aplica desde el año 2003 y se extiende hasta este curso 2005-2006. Se tiene como base el trabajo desarrollado como profesor guía con el grupo D-11, F-16 y el testigo de primer año de Medicina, en los cuales se ha aplicado una estrategia pedagógica y a la misma se le adicionaron métodos educativos y un sistema de técnicas participativas, lo que ha dado resultados satisfactorios. El trabajo tiene como objetivo proponer una alternativa metodológica para el trabajo educativo del profesor guía en el proceso de fortalecimiento de los valores. El mismo brinda elementos teóricos relacionados con el trabajo educativo, diversos métodos y técnicas para realizar el mismo de manera más eficiente y se da a conocer la importancia del profesor guía en este proceso. Entre los resultados se destacan la formulación de pasos metodológicos para poder realizar una estrategia pedagógica, el diseño de una herramienta de trabajo para el profesor guía, indicaciones para efectuar el turno de reflexión y debate, la aplicación del material elaborado en la superación de los profesores guías que pertenecen al comité horizontal del primer año de medicinaThis work is a pedagogic experience developed in the High Medical School of Camaguey, it is applied since 2003 and it extends to the school year 2005-2006. It is based on the work developed by the adviser teachers of two groups and witness classes from first year, in which pedagogic strategies have been applied adding educational methods and a participative techniques system, with satisfactory results. This work has as objective to propose a methodological alternative for the advicer teachers´ educational work in the process of strengthen values. It offers theoretical elements related to the educational work, diverse methods and techniques to carry out it in a more efficient way, and it is showed the importance of the adviser teacher in the process. Among the results stand out the formulation of methodological steps to be able to carry out a pedagogic strategy, the design of a tool for the adviser teacher, indications to develop the debate and reflection shifts, the application of the material elaborated in the adviser teachers´ preparation in the first year horizontal committee.

  17. Opening Lab Doors to High School Students: Keys to a Successful Engagement

    Science.gov (United States)

    Slayton, Rebecca M.; Nelson, Keith A.

    2005-01-01

    A project to invite high school students into research laboratories to plan and carry out an investigation over several weeks, using the sophisticated equipment available there, can help to break down social barriers and enhance outreach activities.

  18. Opening the Door for IT Leadership Opportunities: New Voices from the Field

    Science.gov (United States)

    Drury, Marilyn

    2009-01-01

    The growth and increasing criticality of the CIO role in higher education suggests the importance of recognizing and understanding the characteristics of successful CIOs and the environments supporting their success, with the goal of developing new leaders. Although the literature, in general, provides a rich knowledge base concerning IT…

  19. Opening Doors to Nursing Degrees: Time for Action. A Proposal from Ontario's Colleges

    Science.gov (United States)

    Colleges Ontario, 2015

    2015-01-01

    This report argues that Ontario must expand the educational options for people who want to become registered nurses (RNs). It argues that the change Ontario requires is to authorize colleges to offer their own high-quality nursing degrees. Until 2005, about 70 per cent of Ontario's RNs were educated at colleges. Today, tens of thousands of RNs who…

  20. Court opens door to more claims under Red Cross HIV compensation fund.

    Science.gov (United States)

    Franklin, Tim

    2005-12-01

    The Ontario Superior Court has allowed families of deceased individuals who contracted HIV from tainted blood to proceed with their claims against the Canadian Red Cross for compensation despite the existence of a compensation plan and fund.

  1. Opening the Schoolhouse Doors: Tax Credits and Educational Access in Alabama

    Science.gov (United States)

    Carpenter, Dick M., II.; Erickson, Angela C.

    2014-01-01

    In 2013, Alabama adopted the Alabama Accountability Act, an education reform measure that includes two new school choice programs that extend a lifeline to Alabama students trapped in failing public schools. One program offers a tax credit to help offset the cost of tuition for families who move their children from public schools designated as…

  2. Secure Borders and Open Doors: Preserving Our Welcome to the World in an Age of Terrorism

    National Research Council Canada - National Science Library

    2008-01-01

    As an international beacon of freedom and economic opportunity, and offering unique and attractive opportunities for international businesspeople, students, researchers, and tourists, America has long...

  3. Finding Difference: Nemo and Friends Opening the Door to Disability Theory

    Science.gov (United States)

    Preston, Daniel L.

    2010-01-01

    While middle school and high school students may have watched the Disney and Disney/Pixar films when they were younger, chances are they did not do so with a critical eye toward difference and disability, despite the fact that these films serve as excellent tools for teaching about difference. Recent estimates label 20% of the world's population…

  4. Shopping for Jobs: Mall Internship Program Opens Doors for HVAC Students.

    Science.gov (United States)

    Nolot, Terry

    1995-01-01

    Ivy Tech State College uses River Falls, a shopping mall, as an enormous heating, ventilation, and air conditioning laboratory. Students spend Saturdays working with full-time technicians getting invaluable training and experience. Students see the program as a professional opportunity and a direct route to jobs. (JOW)

  5. Opening Doors: Teaching LGBTQ-Themed Young Adult Literature for an Inclusive Curriculum

    Science.gov (United States)

    Batchelor, Katherine E.; Ramos, Maria; Neiswander, Samantha

    2018-01-01

    LGBTQ themes are often neglected in many schools' curriculum. Currently, an LGBTQ-inclusive curriculum framework is not required in most school districts across the county. Therefore, it is important to understand how teachers regard LGBTQ issues; how they address the needs of students in the middle school and high school English classroom who…

  6. Young people’s writing in senior English classrooms: Opening the classroom door

    OpenAIRE

    LOUISE ANNE PIVA

    2018-01-01

    The thesis is a practitioner inquiry that examines the teaching of writing to Year 12 students in the subject of English. It uses narrative inquiry to examine the teaching and learning of writing over the course of one academic year. It focuses on the dialogue between the teacher, her students and others as well as the contextual and socio-cultural factors that influence and mediate the teaching and learning of writing.

  7. Comparison of anterior decompression and fusion versus laminoplasty in the treatment of multilevel cervical ossification of the posterior longitudinal ligament: a systematic review and meta-analysis

    Directory of Open Access Journals (Sweden)

    Liu W

    2016-04-01

    Full Text Available Weijun Liu,1,* Ling Hu,2,* Po-Hsin Chou,3 Ming Liu,1 Wusheng Kan,1 Junwen Wang1 1Department of Orthopedics, Pu Ai Hospital, Affiliated to Tongji Medical College, Huazhong University of Science and Technology, Wuhan, People’s Republic of China; 2Department of Anesthesiology, Tianyou Hospital, Affiliated to Wuhan University of Science and Technology, Wuhan, People’s Republic of China; 3Department of Orthopedics & Traumatology, Taipei Veterans General Hospital, School of Medicine, National Yang-Ming University, Taipei, Taiwan, ROC *These authors contributed equally to this work Purpose: A meta-analysis was conducted to evaluate the clinical outcomes, complications, reoperation rates, and late neurological deterioration between anterior decompression and fusion (ADF and laminoplasty (LAMP in the treatment of multilevel cervical ossification of the posterior longitudinal ligament (OPLL. Methods: All related studies published up to August 2015 were acquired by searching PubMed and EMBASE. Exclusion criteria were case reports, revision surgeries, combined anterior and posterior surgeries, the other posterior approaches including laminectomy or laminectomy and instrumented fusion, non-English studies, and studies with quality assessment scores of <7. The main end points including Japanese Orthopedic Association (JOA score, recovery rate of JOA, cervical lordosis, complication rate, reoperation rate, and late neurological deterioration were analyzed. All available data was analyzed using RevMan 5.2.0 and Stata 12.0. Results: A total of seven studies were included in the meta-analysis. The mean surgical level of ADF was 3.1, and the mean preoperative occupation ratios of ADF and LAMP group were 55.9% and 51.9%, respectively. No statistical difference was observed with regard to preoperative occupation ratio and preoperative JOA score. Although LAMP group had a higher preoperative cervical lordosis than ADF group (P<0.05, weighted mean difference [WMD

  8. Usage of radiography techniques for restoration of Cizre Mardin Ulucami door

    International Nuclear Information System (INIS)

    Tugrul, B.; Sungur, F.; Gorkem, A.; Olcer, N.

    1986-01-01

    In this study, one of the two sections of Cizre-Mardin Ulucami door is investigated by x-ray radiography technique whether it has some patterns similar to those which were discovered during the restoration of the first section of the door. Some painted and traced parts have been fixed and torn down, cleared and investigated. In the study, many pieces of the first part of the door including the second door have been investigated by x-ray radiography technique and have been evaluated. Furthermore, neutrography has been applied on some painted parts for the investigation of traces of painting. (author)

  9. Open Days – The final countdown

    CERN Multimedia

    2008-01-01

    In only a few days CERN will open its doors to everyone! Thousands of volunteers are working very hard so that your visit will be both mind-boggling and fun. Where is the coldest place in the Universe? How can you move 30 tonne magnets with sub-millimetre precision? Why do you need huge detectors to look at the infinitely small? There’s only one way to find the answers: Come to CERN!

  10. Inflatable door seals - reduced maintenance and longer service-life

    International Nuclear Information System (INIS)

    Kuran, S.; Wensel, R.; Lazic, M.

    1995-01-01

    Inflatable door seals, designed more than a quarter of a century ago, have given good service in Canadian and overseas CANDU reactors. These thin-walled elastomeric seals have been exposed to many thousands of cycles of inflation and deflation, various types of aging (temperature, radiation and time), ozone degradation, abrasion, pinching, stiction, cracking and installation damage. The fact that they have operated successfully as part of the reactor building containment structure - subjected to the same pressures and temperatures as those for the thick reinforced concrete walls and steel doors highlights the achievement of these thin rubber seals. However, in the last decade, the rubber industry has developed new compounds that are more resistant to radiation, temperature, and time-dependent aging. Components manufactured from such compounds are less prone to hardening, stress cracking and permanent set; thereby saving on replacement costs, inventory and overall maintenance. This paper discusses development and testing of recent material and design changes to inflatable seals, and addresses various practical issues faced by the operations engineers and maintainers using these seals. (author)

  11. Onderzoek naar voorkomen van zachte vruchten bij courgette in de afzetketen door optimale watergift

    NARCIS (Netherlands)

    Wijk, van C.A.P.; Wilms, J.A.M.

    2008-01-01

    Vochttekort tijdens de teelt werd door de telers als mogelijke oorzaak gezien. Het ‘weer’ is geen groeifactor waarop de tuinder kan sturen. Vochttekort is wel bij te sturen door water geven. Ter toetsing van de invloed van vochttekort is in 2006 in een late zomer/herfstteelt een proef aangelegd in

  12. Evaluatie van het nieuwe RVV door weggebruikers : een samenvattend verslag van de nameting.

    NARCIS (Netherlands)

    Wittink, R.D.

    1993-01-01

    The new Dutch traffic regulations (RVV of 1990) have been effective since 1 November 1991. This paper presents the results of a door-to-door questionnaire survey among 655 sixteen year olds and older persons in order to investigate their knowledge and opinions about the new RVV. This survey carried

  13. 24 CFR 3280.403 - Standard for windows and sliding glass doors used in manufactured homes.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 5 2010-04-01 2010-04-01 false Standard for windows and sliding... AND SAFETY STANDARDS Testing § 3280.403 Standard for windows and sliding glass doors used in manufactured homes. (a) Scope. This section sets the requirements for prime windows and sliding glass doors...

  14. Bluetooth enables in-door mobile location services

    DEFF Research Database (Denmark)

    Thongthammachart, Saowanee; Olesen, Henning

    2003-01-01

    Several technologies can be applied to enable mobile location services, but most of them suffer from limited accuracy and availability. GPS can solve the problem of determining the location of users in most outdoor situations, but an end-user position inside a building cannot be pinpointed. Other...... mobile location techniques can also provide the user's position, but the accuracy is rather low. In order to improve the accuracy and make location-based services really attractive, existing approaches must be supplemented by new technologies. Wireless short-range technologies like Bluetooth could...... be candidates for solving these problems. This paper shows that Bluetooth can act as a key enabler of mobile location services in an in-door environment. The advantage of Bluetooth technology is, that it can provide rather precise location data inside a building or hotspot area, while the Bluetooth terminal...

  15. Simulation of the noise transmission through automotive door seals

    CERN Document Server

    Hazir, Andreas

    2016-01-01

    Andreas Hazir is investigating the door seal contribution to the interior noise level of production vehicles. These investigations contain experimental contribution analyses of real production vehicles and of academic test cases as well as the development of a simulation methodology for noise transmission through sealing systems and side windows. The simulations are realized by coupling transient computational aeroacoustics of the exterior flow to nonlinear finite element simulations of the structural transmission. By introducing a linear transmission model, the setup and computational costs of the seal noise transmission are significantly reduced, resulting in the feasibility of numerical contribution analyses of real production vehicles. Contents Contribution Analyses of Production Vehicles Acoustic Excitation versus Aeroacoustic Excitation Development of a Simulation Methodology Sensitivity Analysis of Noise Transmission Simulations Target Groups Researchers and students in the field of automotive engineer...

  16. Doors and thresholds: Jeddi's approach to psychiatric disorders.

    Science.gov (United States)

    Devisch, R; Vervaeck, B

    1986-01-01

    Professor Essedik Jeddi and his team have introduced a most significant institutional and therapeutic innovation at the Ibn Rochd and Pinel section of the Razi university long-term mental hospital in Tunis (Tunisia). The innovation focuses upon the ambiguity of doors and boundaries in the mental asylum. Doors and walls influence the rhythm of activity and the nature of contact between patients, therapists and the wider society and culture. If they are very rigid, they may disjoin the patient from him- or herself, from his/her body, social network and culture. On the other hand, if such boundaries are completely neglected they may merge these related dimensions as undifferentiated entities. Jeddi's innovation is primarily concerned with placing the spatio-temporal experience of the body and the intimate interpersonal interaction at the centre of treatment. It aims at establishing creative modes of expression, interaction and exchange such as tea-sessions, dancing, singing, verbal communication, clay-modelling, figurative or plastic expression, agricultural works. These relationships mediate and differentiate at the same time between the patient, his/her body-self, and his/her social and cultural world, thus avoiding both the disjunction and the merging. It would seem that the activities concerned with the distinction between 'inside' and 'outside', peasant and urban, self and other (e.g. dancing and singing) are of paramount importance in bringing about such mediating and differentiating relationships. In the present study we limit ourselves to one particularly revealing therapeutic activity, namely dancing to live music. Jeddi's innovation is a unique blend of current developments in psychiatry and psychotherapy with Arabo-Islamic science and philosophy.

  17. Telling About Southern Fluctuations: Elizabeth Spencer at the Back Door

    Directory of Open Access Journals (Sweden)

    Gérald PRÉHER

    2011-06-01

    Full Text Available Le troisième roman d’Elizabeth Spencer, The Voice at the Back Door (1956, appartient à son cycle du Mississippi. Il traite des relations raciales et de la violence sudiste, deux thèmes qui n’avaient pas bonne presse à cette époque puisque le mouvement pour les droits civiques débutait. Le roman rappelle L’intrus (1948 de Faulkner en ce qu’il met en scène la recherche du coupable du meurtre d’un homme blanc. Cet article analyse la façon dont Spencer dépeint les manières du Sud en s’interrogeant sur les relations raciales. Le roman est également lu dans le contexte de sa publication puisque Spencer fut perçue comme une traîtresse par les Sudistes. Spencer utilise des sujets impopulaires pour révéler le paradoxe au cœur de la manière de vivre sudiste et montre combien le passé se rejoue constamment dans le présent.Elizabeth Spencer’s third novel, The Voice at the Back Door (1956, is part of her Mississippi cycle. It deals with race relations and southern violence, two highly controversial issues at the time since the Civil Rights Movements were beginning. The novel, reminiscent of William Faulkner’s Intruder in the Dust (1948, stages the search for a culprit after the murder of a white man. This paper focuses on Spencer’s portrait of southern manners and interracial relationships and analyzes the novel in the context of its publication. It will show that Spencer uses unpopular topics to expose the paradox at the core of the southern way of life and show that the past is constantly reenacted in the present.

  18. Ruimte in regels: 10 succesvolle voorbeelden op wet en regelgeving binnen ruimtelijke ordening voor multifunctionele landbouw voor en door gemeenten

    NARCIS (Netherlands)

    Schoorlemmer, H.B.; Waal, van der B.H.C.; Oppedijk van Veen, J.; Migchels, G.; Mul, M.F.

    2007-01-01

    Deze VNG brochure geeft een overzicht van 10 succesvolle voorbeelden op wet en regelgeving binnen ruimtelijke ordening voor multifunctionele landbouw voor en door gemeenten. Van traditionele bestemmingsplannen naar een nieuw, ontwikkelingsgericht beleid. De brochure is samengesteld door PPO

  19. Balancing Open Access with Academic Standards: Implications for Community College Faculty

    Science.gov (United States)

    Gabbard, Anita; Mupinga, Davison M.

    2013-01-01

    Community colleges act as the gateway for students to higher education. Many of these colleges realize this mission through open-door policies where students lacking in basic reading, writing, and mathematics skills can enroll. But, this open-access policy often creates challenges when meeting academic standards. Based on data collected from…

  20. Door-to-door survey of major neurological disorders (project in Al Quseir City, Red Sea Governorate, Egypt

    Directory of Open Access Journals (Sweden)

    El Tallawy HN

    2013-05-01

    Full Text Available Hamdy NA El Tallawy,1 Wafaa MA Farghaly,1 Tarek A Rageh,1 Ghaydaa A Shehata,1 Reda Badry,1 Nabil A Metwally,2 Esam A El Moselhy,2 Mahmoud Hassan,2 Mohamed A Sayed,3 Ahmed A Waris,1 Yaser Hamed,2 Islam Shaaban,2 Mohamed A Hamed,1 Mahmoud Raafat Kandil11Department of Neurology, Faculty of Medicine, Assiut University, Assiut, Egypt; 2Department of Neurology and Public Health, Faculty of Medicine, Al-Azhar University (Assiut branch, Assiut, Egypt; 3Department of Neurology, Faculty of Medicine, Sohag University, Sohag, EgyptAbstract: A door-to-door survey, including every household, was conducted for all inhabitants of Al Quseir City (33,283, Red Sea Governorate, Egypt by three specialists of neurology as well as nine senior staff members of neurology and 15 female social workers to assess the epidemiology of major neurological disorders. Over six phases, from July 1, 2009 to January 31, 2012, screening of all eligible people in the population was carried out, by which case ascertainment of all major neurological disorders included in the study was done according to the accepted definitions and diagnostic criteria of the World Health Organization. The order of frequency of prevalence of the studied neurological disorders was dementia (3.83% for those aged > 60 years, migraine (2.8% for those aged > 8 years, stroke (6.2/1000 for those aged > 20 years, epilepsy (5.5/1000, Parkinson’s disease (452.1/100,000 for those aged > 40 years, cerebral palsy (3.6/1000 among children 37 years, chorea (21.03/100,000, athetosis (15/100,000, and multiple sclerosis (13.74/100,000. The incidence rates of stroke, epilepsy, and Bell’s palsy were 181/100,000, 48/100,000, and 98.9/100,000 per year, respectively.Keywords: prevalence, incidence, neurological disorders

  1. Design, development and testing of a high speed door for a blast containment fixture

    International Nuclear Information System (INIS)

    Shapiro, C.

    1991-01-01

    This paper reports that the concept of a large door able to close over a three foot diameter hole in less than 50 milliseconds evolved during the design of a test containment fixture at the Idaho National Engineering laboratory (INEL). This facility was designed for use at the Aberdeen Proving Ground (APG) in Aberdeen, Maryland. EPA regulations required new technologies for blast containment at APG, which culminated in the design of the blast chamber with a high speed door at its entrance. The main requirement of the fixture is to contain large explosion pressure pulses and explosive by-products during a variety of test scenarios. The door was designed to allow entrance of test projectiles and then to close over the entrance hole to contain explosive by-products inside the fixture. The speed of the projectile and the resultant blast pressure pulse required door closure within 56 msec. Analytical modelling of the door closure indicated velocities of up to 150 ft/sec before impact, for closure within the required time. Lightweight materials were used for the moving parts to minimize this impact force, including aluminum honeycomb composite panels and energy absorbers. Actuation was accomplished with a standard explosive bolt. High pressure nitrogen accelerated the door during closure. Time measurement for the door closer were obtained using high speed video equipment

  2. Hand sanitizer-dispensing door handles increase hand hygiene compliance: a pilot study.

    Science.gov (United States)

    Babiarz, Lukasz S; Savoie, Brent; McGuire, Mark; McConnell, Lauren; Nagy, Paul

    2014-04-01

    Improving rates of hand hygiene compliance (HHC) has been shown to reduce nosocomial disease. We compared the HHC for a traditional wall-mounted unit and a novel sanitizer-dispensing door handle device in a hospital inpatient ultrasound area. HHC increased 24.5%-77.1% (P sanitizer-dispensing door handle, whereas it remained unchanged for the other rooms. Technical improvements like a sanitizer-dispensing door handle can improve hospital HHC. Copyright © 2014 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Mosby, Inc. All rights reserved.

  3. Esophagectomy - open

    Science.gov (United States)

    ... Lewis esophagectomy, Blunt esophagectomy; Esophageal cancer - esophagectomy - open; Cancer of the esophagus - esophagectomy - open ... lining of the esophagus that can lead to cancer ( Barrett esophagus ) Severe trauma Destroyed esophagus Severely damaged stomach

  4. The Vaccination of 35,000 Dogs in 20 Working Days Using Combined Static Point and Door-to-Door Methods in Blantyre, Malawi.

    Directory of Open Access Journals (Sweden)

    Andrew D Gibson

    2016-07-01

    Full Text Available An estimated 60,000 people die of rabies annually. The vast majority of cases of human rabies develop following a bite from an infected dog. Rabies can be controlled in both human and canine populations through widespread vaccination of dogs. Rabies is particularly problematic in Malawi, costing the country an estimated 13 million USD and 484 human deaths annually, with an increasing paediatric incidence in Blantyre City. Consequently, the aim of this study was to vaccinate a minimum of 75% of all the dogs within Blantyre city during a one month period. Blantyre's 25 administrative wards were divided into 204 working zones. For initial planning, a mean human:dog ratio from the literature enabled estimation of dog population size and dog surveys were then performed in 29 working zones in order to assess dog distribution by land type. Vaccination was conducted at static point stations at weekends, at a total of 44 sites, with each operating for an average of 1.3 days. On Monday to Wednesday, door-to-door vaccination sessions were undertaken in the areas surrounding the preceding static point stations. 23,442 dogs were vaccinated at static point stations and 11,774 dogs were vaccinated during door-to-door vaccinations. At the end of the 20 day vaccination programme, an assessment of vaccination coverage through door-to-door surveys found that of 10,919 dogs observed, 8,661 were vaccinated resulting in a vaccination coverage of 79.3% (95%CI 78.6-80.1%. The estimated human:dog ratio for Blantyre city was 18.1:1. Mobile technology facilitated the collection of data as well as efficient direction and coordination of vaccination teams in near real time. This study demonstrates the feasibility of vaccinating large numbers of dogs at a high vaccination coverage, over a short time period in a large African city.

  5. The Vaccination of 35,000 Dogs in 20 Working Days Using Combined Static Point and Door-to-Door Methods in Blantyre, Malawi.

    Science.gov (United States)

    Gibson, Andrew D; Handel, Ian G; Shervell, Kate; Roux, Tarryn; Mayer, Dagmar; Muyila, Stanford; Maruwo, Golden B; Nkhulungo, Edwin M S; Foster, Rachel A; Chikungwa, Patrick; Chimera, Bernard; Bronsvoort, Barend M deC; Mellanby, Richard J; Gamble, Luke

    2016-07-01

    An estimated 60,000 people die of rabies annually. The vast majority of cases of human rabies develop following a bite from an infected dog. Rabies can be controlled in both human and canine populations through widespread vaccination of dogs. Rabies is particularly problematic in Malawi, costing the country an estimated 13 million USD and 484 human deaths annually, with an increasing paediatric incidence in Blantyre City. Consequently, the aim of this study was to vaccinate a minimum of 75% of all the dogs within Blantyre city during a one month period. Blantyre's 25 administrative wards were divided into 204 working zones. For initial planning, a mean human:dog ratio from the literature enabled estimation of dog population size and dog surveys were then performed in 29 working zones in order to assess dog distribution by land type. Vaccination was conducted at static point stations at weekends, at a total of 44 sites, with each operating for an average of 1.3 days. On Monday to Wednesday, door-to-door vaccination sessions were undertaken in the areas surrounding the preceding static point stations. 23,442 dogs were vaccinated at static point stations and 11,774 dogs were vaccinated during door-to-door vaccinations. At the end of the 20 day vaccination programme, an assessment of vaccination coverage through door-to-door surveys found that of 10,919 dogs observed, 8,661 were vaccinated resulting in a vaccination coverage of 79.3% (95%CI 78.6-80.1%). The estimated human:dog ratio for Blantyre city was 18.1:1. Mobile technology facilitated the collection of data as well as efficient direction and coordination of vaccination teams in near real time. This study demonstrates the feasibility of vaccinating large numbers of dogs at a high vaccination coverage, over a short time period in a large African city.

  6. Open access

    NARCIS (Netherlands)

    Valkenburg, P.M.

    2015-01-01

    Open access week Van 19 tot en met 25 oktober 2015 vond wereldwijd de Open Access Week plaats. Tijdens deze week werden er over de hele wereld evenementen georganiseerd waar open access een rol speelt. Ook in Nederland zijn er diverse symposia, workshops en debatten georganiseerd zoals het debat in

  7. DOORS Syndrome: Phenotype, Genotype and Comparison With Coffin-Siris Syndrome

    NARCIS (Netherlands)

    Campeau, Philippe M.; Hennekam, Raoul C.; Aftimos, Salim; Banka, Siddharth; Begleiter, Michael L.; Bilo, Leonilda; Blair, Edward; Burrage, Lindsay C.; Liu, David S.; de Bie, Isabelle; Félix, Têmis Maria; Giltay, Jacques C.; Gibbs, Richard A.; Giuliano, Fabienne; Hadzsiev, Kinga; Hori, Mutsuki; Kariminejad, Ariana; Kayserili, Hülya; Kerr, Bronwyn; Lee, Brendan H.; Lu, James T.; Male, Alison; Meenakshi, Girish; Mey, Antje; Murray, Mitzi L.; Nair, Lal D. V.; Nampoothiri, Sheela; Newman, William G.; Peluso, Silvio; Peters, Heidi; Powell, R.; Repetto, Gabriela M.; Rump, Patrick; Santos-Simarro, Fernando; Stewart, Fiona; van Bever, Yolande; van den Ende, Jenneke; Wieczorek, Dagmar; Wisniewska, Marzena; Sisodiya, Sanjay M.

    2014-01-01

    DOORS syndrome (Deafness, Onychodystrophy, Osteodystrophy, mental Retardation, Seizures) is characterized mainly by sensorineural deafness, shortened terminal phalanges with small nails of hands and feet, intellectual deficiency, and seizures. Half of the patients with all clinical features have

  8. Resultaten van de proeftuinen van PACT : inclusie door interprofessionele samenwerking in kindvoorzieningen 0-6 jaar

    NARCIS (Netherlands)

    Doornenbal, Jeannette; Balledux, Marielle; Fukkink, Ruben; Spoelstra, Jolanda; van Verseveld, Marloes; van Yperen, Tom

    2018-01-01

    In deze bijdrage worden de onderzoeksresultaten gepresenteerd van de ontwikkelingen in de PACT-proeftuinen om door middel van interprofessionele samenwerking tussen onderwijs, kinderopvang en zorg inclusie van elk kind te realiseren.

  9. Effects of Door Width and Human Body Size on Walking Speed

    Directory of Open Access Journals (Sweden)

    Jetthumrong Siwalee

    2016-01-01

    Full Text Available Door width is one of the important factors to concern in layout or facilities design because it affects directly to traffic speed and overall traffic time simultaneously. Nowadays, common assessment method is computer simulation which is still not realistic due to the unchanged speed of model while walking through a door. This research aims to study an effect of door width to individual walking speed. Sixty subjects participated in the experiment and performed task by walking through the door that is set the width as 40, 50, 60, 70, 80, 90 and 100 centimetres. The optical motion capture system was used to determine walking speed. The results showed that Fitts’ law was applied to the participants with high weight. Door width below 70 centimetres significantly affected to changing speed at 0-0.5 m. before the door. Additionally, human size also affected changing speed. The factors include shoulder breadth, weight and interaction between shoulder breadth and weight were found to be significant. These factors explained 54.2% of changing speed.

  10. Study of structural capacity and serviceability affecting the obstruction of residential door

    Directory of Open Access Journals (Sweden)

    Eric Forcael

    Full Text Available The last Chilean earthquake, occurred on February 27, 2010, allowed establishing important patterns of structural failures in reinforced concrete residential buildings; however, limited progress has been made in the study of basic standards of serviceability, such as obstruction of doors. Thus, this study focused on measuring the influence of design specifications and construction criteria of lintels and columns, in terms of obstruction of doors, considering capacity thresholds for certain levels of displacement. The study consisted of the design and construction of a full-scale prototype of a reinforced concrete frame, designed in accordance with all the ACI-318-08 requirements, taking into account typical aspects of geometry and materiality widely used by the real estate industry, for location and size of doors. In order to quantify the structural capacity of the prototype and to study the serviceability of the door, a quasi-static cyclic test was conducted, according to load and displacement protocols specified in FEMA 356 and FEMA 461, which was adjusted by using virtual models based on a static nonlinear analysis called "Pushover". This research verified that, for displacement levels even five times higher than those established by codes considered, the cracking degree was minimal and fully recoverable. It was also found the door evidenced malfunction when the displacements were greater than those specified by design only, validating a high degree of accomplishment of current codes, in terms of capacity and serviceability, when dealing with obstruction of residential doors.

  11. Saving millions by thermal insulation; Miljoenen besparen door goede isolatie

    Energy Technology Data Exchange (ETDEWEB)

    Van der Velden, U. [Nederlands Centrum voor Technische Isolatie NCTI, spijkenisse (Netherlands)

    2009-07-15

    Corrosion under insulation (CUI) can be reduced by the application of a correctly designed, installed and maintained insulation system. In refrigeration plants a heat flow will occur from the warm outside towards the cold inside. Hot air, containing more moisture, will be distributed to the cold components of the installation, such as separators, intermediate coolers, piping and valves, thus not only facilitating CUI, but also seriously compromising the thermal performance of the system. Furthermore, this moisture could condensate or freeze and compromise the integrity of the installation. Insulation in cold systems is built up with closed cell materials, such as elastomeric foam, PIR (polyisocyanurate) or cellular glass. On the outside a vapor barrier (e.g. reinforced aluminium foil) is essential to prevent hot moist air from penetrating the system. For protection against weather influences and/or mechanical damage, the system should be finished with a (non)metal cladding. [Dutch] Corrosie onder isolatie (CUI) kan worden beperkt door toepassing van een correct ontworpen, geinstalleerd en onderhouden isolatiesysteem. Bij koude-isolatiesystemen treedt een warmtestroom van buiten naar binnen op. Warme lucht - die meer vocht bevat - dringt naar installatiecomponenten, zoals afscheiders, tussenkoelers, leidingen en afstuiters, waarbij niet alleen het risico op CUI aanzienlijk toeneemt, maar ook de isolatiewaarde van het systeem gereduceerd wordt. Vocht kan hierbij ook nog condenseren of bevriezen en de integriteit van de hele installatie in gevaar brengen. Koude-isolatiesystemen dienen te worden opgebouwd met gesloten cel-materiaal, zoals elastomeer schuim, PIR (polyisocyanurate) of cellulair glas. Het systeem dient aan de buitenzijde te worden voorzien van een dampremmende laag (van bijvoorbeeld versterkt aluminiumfolie) om binnendringend vocht te blokkeren. In buitencondities moet het systeem worden voorzien van een (metalen of niet-metalen) eindafwerking, die

  12. Open Content in Open Context

    Science.gov (United States)

    Kansa, Sarah Whitcher; Kansa, Eric C.

    2007-01-01

    This article presents the challenges and rewards of sharing research content through a discussion of Open Context, a new open access data publication system for field sciences and museum collections. Open Context is the first data repository of its kind, allowing self-publication of research data, community commentary through tagging, and clear…

  13. Weak openness and almost openness

    Directory of Open Access Journals (Sweden)

    David A. Rose

    1984-01-01

    Full Text Available Weak openness and almost openness for arbitrary functions between topological spaces are defined as duals to the weak continuity of Levine and the almost continuity of Husain respectively. Independence of these two openness conditions is noted and comparison is made between these and the almost openness of Singal and Singal. Some results dual to those known for weak continuity and almost continuity are obtained. Nearly almost openness is defined and used to obtain an improved link from weak continuity to almost continuity.

  14. A Comparative Study of Two Different Uncinectomy Techniques: Swing-Door and Classical

    Directory of Open Access Journals (Sweden)

    Ankit A Singhania

    2011-01-01

    Full Text Available Introduction: The aim of this study was to determine which technique of uncinectomy, classical or swing door technique.  Materials and Methods: Four hundred eighty Cases of sinusitis were selected and operated for Functional Endoscopic Sinus Surgery (FESS. Out of these, in 240 uncinectomies classical uncinectomy was done whereas in another 240 uncinectomies swing door technique was used. Initially patients were medically managed treated according to their symptoms and prior management. Patients who had received previous adequate medical management were evaluated with CT scan of the sinuses. If disease still persists than they were operated for FESS. Results: The authors' experience indicates that Functional endoscopic sinus surgery can be performed under local or general anesthesia, as permitted or tolerated. In this review classical technique was used in 240 uncinectomies. Out of this, ethmoidal complex injury was noted in 4 cases, missed maxillary ostium syndrome (incomplete removal was reported in 12 patients and orbital fat exposure was encountered in 5 patients. As compared to 240 uncinectomies done with swing door technique, incomplete removal was evident in 2 cases and lacrimal duct injury was reported in 3 cases. 'Evidence that underscores how this 'swing door technique' successfully combines 'the conservation goals of the anterior-to-posterior approach and anatomic virtues of the posterior-to-anterior approach to ethmoidectomy of the total 480 uncinectomies operated. Out of which 240 uncinectomies have been performed using the 'swing-door' technique. The 240 uncinectomies performed using classical technique were used as controls. The incidence of orbital penetration, incomplete removal, ethmoidal complex injury and ostium non-identification was significantly less with the new technique. Three lacrimal injuries occurred with the 'swing-door' technique compared to no injuries with classical technique. Conclusion: The authors recommend

  15. A comparative study of two different uncinectomy techniques: swing-door and classical.

    Science.gov (United States)

    Singhania, Ankit A; Bansal, Chetan; Chauhan, Nirali; Soni, Saurav

    2012-01-01

    The aim of this study was to determine which technique of uncinectomy, classical or swing door technique. Four hundred eighty Cases of sinusitis were selected and operated for Functional Endoscopic Sinus Surgery (FESS). Out of these, in 240 uncinectomies classical uncinectomy was done whereas in another 240 uncinectomies swing door technique was used. Initially patients were medically managed treated according to their symptoms and prior management. Patients who had received previous adequate medical management were evaluated with CT scan of the sinuses. If disease still persists than they were operated for FESS. The authors' experience indicates that Functional endoscopic sinus surgery can be performed under local or general anesthesia, as permitted or tolerated. In this review classical technique was used in 240 uncinectomies. Out of this, ethmoidal complex injury was noted in 4 cases, missed maxillary ostium syndrome (incomplete removal) was reported in 12 patients and orbital fat exposure was encountered in 5 patients. As compared to 240 uncinectomies done with swing door technique, incomplete removal was evident in 2 cases and lacrimal duct injury was reported in 3 cases. 'Evidence that underscores how this 'swing door technique' successfully combines 'the conservation goals of the anterior-to-posterior approach and anatomic virtues of the posterior-to-anterior approach to ethmoidectomy of the total 480 uncinectomies operated. Out of which 240 uncinectomies have been performed using the 'swing-door' technique. The 240 uncinectomies performed using classical technique were used as controls. The incidence of orbital penetration, incomplete removal, ethmoidal complex injury and ostium non-identification was significantly less with the new technique. Three lacrimal injuries occurred with the 'swing-door' technique compared to no injuries with classical technique. The authors recommend swing door technique as it is easy to learn, allows complete removal of the

  16. Open Day at the World Trade Organization

    CERN Multimedia

    2009-01-01

    On Sunday 6 September, the World Trade Organization will open its doors to the public. Throughout the day there will be guided tours of the building, which will reveal the many works of art donated by countries over the years; on the main terrace, food stands will give visitors a flavour of the worldwide membership of the WTO and provide the opportunity to sample regional specialities; and children can have fun with face painting, a bouncy castle and a drawing contest on the theme "Draw me globalization" and/or "Draw me the WTO". The full programme of activities

  17. Open hardware for open science

    CERN Multimedia

    CERN Bulletin

    2011-01-01

    Inspired by the open source software movement, the Open Hardware Repository was created to enable hardware developers to share the results of their R&D activities. The recently published CERN Open Hardware Licence offers the legal framework to support this knowledge and technology exchange.   Two years ago, a group of electronics designers led by Javier Serrano, a CERN engineer, working in experimental physics laboratories created the Open Hardware Repository (OHR). This project was initiated in order to facilitate the exchange of hardware designs across the community in line with the ideals of “open science”. The main objectives include avoiding duplication of effort by sharing results across different teams that might be working on the same need. “For hardware developers, the advantages of open hardware are numerous. For example, it is a great learning tool for technologies some developers would not otherwise master, and it avoids unnecessary work if someone ha...

  18. Open Access

    Science.gov (United States)

    Suber, Peter

    2012-01-01

    The Internet lets us share perfect copies of our work with a worldwide audience at virtually no cost. We take advantage of this revolutionary opportunity when we make our work "open access": digital, online, free of charge, and free of most copyright and licensing restrictions. Open access is made possible by the Internet and copyright-holder…

  19. Open innovation

    DEFF Research Database (Denmark)

    Bogers, Marcel; Chesbrough, Henry; Moedas, Carlos

    2018-01-01

    Open innovation is now a widely used concept in academia, business, and policy making. This article describes the state of open innovation at the intersection of research, practice, and policy. It discusses some key trends (e.g., digital transformation), challenges (e.g., uncertainty...

  20. Desirability of Outcome Ranking (DOOR) and Response Adjusted for Duration of Antibiotic Risk (RADAR).

    Science.gov (United States)

    Evans, Scott R; Rubin, Daniel; Follmann, Dean; Pennello, Gene; Huskins, W Charles; Powers, John H; Schoenfeld, David; Chuang-Stein, Christy; Cosgrove, Sara E; Fowler, Vance G; Lautenbach, Ebbing; Chambers, Henry F

    2015-09-01

    Clinical trials that compare strategies to optimize antibiotic use are of critical importance but are limited by competing risks that distort outcome interpretation, complexities of noninferiority trials, large sample sizes, and inadequate evaluation of benefits and harms at the patient level. The Antibacterial Resistance Leadership Group strives to overcome these challenges through innovative trial design. Response adjusted for duration of antibiotic risk (RADAR) is a novel methodology utilizing a superiority design and a 2-step process: (1) categorizing patients into an overall clinical outcome (based on benefits and harms), and (2) ranking patients with respect to a desirability of outcome ranking (DOOR). DOORs are constructed by assigning higher ranks to patients with (1) better overall clinical outcomes and (2) shorter durations of antibiotic use for similar overall clinical outcomes. DOOR distributions are compared between antibiotic use strategies. The probability that a randomly selected patient will have a better DOOR if assigned to the new strategy is estimated. DOOR/RADAR represents a new paradigm in assessing the risks and benefits of new strategies to optimize antibiotic use. © The Author 2015. Published by Oxford University Press on behalf of the Infectious Diseases Society of America. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

  1. DYNAMIC TIME HISTORY ANALYSIS OF BLAST RESISTANT DOOR USING BLAST LOAD MODELED AS IMPACT LOAD

    Directory of Open Access Journals (Sweden)

    Y. A. Pranata

    2012-06-01

    Full Text Available A blast resistant single door was designed to withstand a 0.91 bar blast pressure and 44 ms blast duration. The analysis was done using Dynamic Time History Analysis using Blast Load modeled as Impact Load for given duration. The material properties used have been modified to accommodate dynamic effects. The analysis was done using dynamic finite element method (fem for time of the blast duration, and the maximum/minimum internal forces and displacement were taken from the time history output, in order to know the behavior under blast load and estimate the safety margin of the door. Results obtained from this research indicated that the maximum z-displacement is 1.709 mm, while in the term of serviceability, the permitted is 25 mm. The maximum reaction force is 73,960 N, while the maximum anchor capacity is 82,069 N. On blast condition, the maximum frame stress is 71.71 MPa, the maximum hinge shear stress is 45.28 MPa. While on rebound condition, the maximum frame stress is 172.11 MPa, the maximum hinge shear stress is 29.46 MPa. The maximum door edge rotation is 0.44 degree, which is not exceed the permitted boundary (1.2 degree. Keywords: Dynamic time history, blast resistant door, single door, finite element method.

  2. Barriers to and enablers for European rail freight transport for integrated door-to-door logistics service. Part 2: Enablers for multimodal rail freight transport

    Directory of Open Access Journals (Sweden)

    Dewan Md Zahurul ISLAM

    2014-12-01

    Full Text Available The objective of this paper is to examine and identify barriers to and enablers for the European rail freight transport services as a transport chain partner along the supply chains in the changing market scenario. The changing market scenario includes, among others, requiring 'door-to-door' rather than 'terminal to terminal' and integrated service, competitive ability to attract non-rail cargo type, changes in the customer requirements (e.g. reliable service and changes in the operational requirements and practices. Using a literature review method, the paper is presented in two parts. The part 1 focuses on the identification of barriers to the European rail freight service by reviewing freight logistics services for global supply chains followed by the current performance of European rail freight transport followed by a discussion on the rail freight market liberalisation in Europe. Then rail freight transport in the Unites States (U.S. is discussed. The research notes that although the background, scope and necessity for reform measures in Europe differ from those of the U.S., some lessons can be learned and the main lesson is that an appropriate reform measure can enhance rail sector competitive ability in Europe. The part 2 of the paper is dedicated to recommend some concrete steps and actions as enablers to remove the barriers identified in the part 1 to develop multimodal rail freight transport. The enablers for multimodal rail freight transport include: •\tEuropean rail freight transport market needs full liberalisation so that incumbent and new entrants can compete freely. •\tThe rail operators need to acquire service (e.g. customer tailored services, door to door service quality offered by road freight operators. •\tThey need to conduct a combination of ‘terminal-to-terminal’ and door-to-door operations, as and when needed; •\tThey must build partnership with freight forwarder or 3PLs to include all types of customers

  3. O triste quadro da saúde: análise de um out-door

    Directory of Open Access Journals (Sweden)

    Fernando Lefèvre

    1995-09-01

    Full Text Available Procura-se, neste trabalho, analisar um out­door presente na cidade de São Paulo, no mês de maio de 1993, e que intitula-se : "O triste quadro da saúde". Em função de vários elementos encontrados no texto e em função do contexto externo, o referido out-door permite e possibilita, pelo menos, duas leituras de sentidos absolutamente opostos, o que, certamente, implica, no caso de um out-door "assinado", uma escolha inadequada da mensagem por parte dos signatários. Em função disso, sugere-se cuidado e atenção para a ambigüidade presente, com muita freqüência, nas mensagens e nos discursos.

  4. DOORS syndrome: phenotype, genotype and comparison with Coffin-Siris syndrome.

    Science.gov (United States)

    Campeau, Philippe M; Hennekam, Raoul C

    2014-09-01

    DOORS syndrome (Deafness, Onychodystrophy, Osteodystrophy, mental Retardation, Seizures) is characterized mainly by sensorineural deafness, shortened terminal phalanges with small nails of hands and feet, intellectual deficiency, and seizures. Half of the patients with all clinical features have mutations in TBC1D24. We review here the manifestations of patients clinically diagnosed with DOORS syndrome. In this cohort of 32 families (36 patients) we detected 13 individuals from 10 families with TBC1D24 mutations. Subsequent whole exome sequencing in the cohort showed the same de novoSMARCB1 mutation (c.1130G>A), known to cause Coffin-Siris syndrome, in two patients. Distinguishing features include retinal anomalies, Dandy-Walker malformation, scoliosis, rocker bottom feet, respiratory difficulties and absence of seizures, and 2-oxoglutaric aciduria in the patients with the SMARCB1 mutation. We briefly discuss the heterogeneity of the DOORS syndrome phenotype and the differential diagnosis of this condition. © 2014 Wiley Periodicals, Inc.

  5. Open Bibliography

    OpenAIRE

    Murray-Rust, Peter; Pollock, Rufus; MacGillivray, Mark; O'Steen, Ben; Waites, William

    2011-01-01

    Poster presented at the VSMF Symposium held at the Unilever Centre on 2011-01-17. More research is published currently than can be understood or followed by a researcher without the aid of a computer. We need Open shareable information on research publications, an Open Bibliography, to build the services that enable researchers to explore their field and discover the research they need. Producers of bibliographic data such as libraries, publishers, universities, scholars or social referenc...

  6. Open IS

    DEFF Research Database (Denmark)

    Germonprez, Matt; Crowston, Kevin; Avital, Michel

    2013-01-01

    The collective intelligence and collective action of “open” communities have produced a variety of complex knowledge goods and radical social change. The Information Systems (IS) community has invested significant effort into researching open communities and the ecosystems in which they operate...... therefore seeks to stimulate a thoughtful and dynamic discussion around the proposition that becoming a more open community will enhance the IS discipline’s scholarly inquiry and global impact....

  7. Indoor Modelling from Slam-Based Laser Scanner: Door Detection to Envelope Reconstruction

    Science.gov (United States)

    Díaz-Vilariño, L.; Verbree, E.; Zlatanova, S.; Diakité, A.

    2017-09-01

    Updated and detailed indoor models are being increasingly demanded for various applications such as emergency management or navigational assistance. The consolidation of new portable and mobile acquisition systems has led to a higher availability of 3D point cloud data from indoors. In this work, we explore the combined use of point clouds and trajectories from SLAM-based laser scanner to automate the reconstruction of building indoors. The methodology starts by door detection, since doors represent transitions from one indoor space to other, which constitutes an initial approach about the global configuration of the point cloud into building rooms. For this purpose, the trajectory is used to create a vertical point cloud profile in which doors are detected as local minimum of vertical distances. As point cloud and trajectory are related by time stamp, this feature is used to subdivide the point cloud into subspaces according to the location of the doors. The correspondence between subspaces and building rooms is not unambiguous. One subspace always corresponds to one room, but one room is not necessarily depicted by just one subspace, for example, in case of a room containing several doors and in which the acquisition is performed in a discontinue way. The labelling problem is formulated as combinatorial approach solved as a minimum energy optimization. Once the point cloud is subdivided into building rooms, envelop (conformed by walls, ceilings and floors) is reconstructed for each space. The connectivity between spaces is included by adding the previously detected doors to the reconstructed model. The methodology is tested in a real case study.

  8. INDOOR MODELLING FROM SLAM-BASED LASER SCANNER: DOOR DETECTION TO ENVELOPE RECONSTRUCTION

    Directory of Open Access Journals (Sweden)

    L. Díaz-Vilariño

    2017-09-01

    Full Text Available Updated and detailed indoor models are being increasingly demanded for various applications such as emergency management or navigational assistance. The consolidation of new portable and mobile acquisition systems has led to a higher availability of 3D point cloud data from indoors. In this work, we explore the combined use of point clouds and trajectories from SLAM-based laser scanner to automate the reconstruction of building indoors. The methodology starts by door detection, since doors represent transitions from one indoor space to other, which constitutes an initial approach about the global configuration of the point cloud into building rooms. For this purpose, the trajectory is used to create a vertical point cloud profile in which doors are detected as local minimum of vertical distances. As point cloud and trajectory are related by time stamp, this feature is used to subdivide the point cloud into subspaces according to the location of the doors. The correspondence between subspaces and building rooms is not unambiguous. One subspace always corresponds to one room, but one room is not necessarily depicted by just one subspace, for example, in case of a room containing several doors and in which the acquisition is performed in a discontinue way. The labelling problem is formulated as combinatorial approach solved as a minimum energy optimization. Once the point cloud is subdivided into building rooms, envelop (conformed by walls, ceilings and floors is reconstructed for each space. The connectivity between spaces is included by adding the previously detected doors to the reconstructed model. The methodology is tested in a real case study.

  9. Gallbladder removal - open

    Science.gov (United States)

    Cholecystectomy - open; Gallbladder - open cholecystectomy; Cholecystitis - open cholecystectomy; Gallstones - open cholecystectomy ... a medical instrument called a laparoscope ( laparoscopic ... Open gallbladder surgery is used when laparoscopic surgery cannot ...

  10. Development of the automated bunker door by using a microcontroller-system

    Science.gov (United States)

    Ahmad, M. A.; Leo, K. W.; Mohamad, G. H. P.; Ahmad, A.; Hashim, S. A.; Chulan, R. M.; Baijan, A. H.

    2018-01-01

    The new low energy electron beam accelerator bunker was designed and built locally to allocate a 500 keV electron beam accelerator at Block 43T in Malaysian Nuclear Agency. This bunker is equipped with a locally made radiation shielding door of 10 tons. Originally, this door is moving manually by a wheel and fitted with a gear system. However, it is still heavy and need longer time to operate it manually. To overcome those issues, a new automated control system has been designed and developed. In this paper, the complete steps and design of automated control system based on the microcontroller (PIC16F84A) is described.

  11. An Intelligent Automated Door Control System Based on a Smart Camera

    Directory of Open Access Journals (Sweden)

    Jiann-Jone Chen

    2013-05-01

    Full Text Available This paper presents an innovative access control system, based on human detection and path analysis, to reduce false automatic door system actions while increasing the added values for security applications. The proposed system can first identify a person from the scene, and track his trajectory to predict his intention for accessing the entrance, and finally activate the door accordingly. The experimental results show that the proposed system has the advantages of high precision, safety, reliability, and can be responsive to demands, while preserving the benefits of being low cost and high added value.

  12. Open access

    CERN Document Server

    Suber, Peter

    2012-01-01

    The Internet lets us share perfect copies of our work with a worldwide audience at virtually no cost. We take advantage of this revolutionary opportunity when we make our work "open access": digital, online, free of charge, and free of most copyright and licensing restrictions. Open access is made possible by the Internet and copyright-holder consent, and many authors, musicians, filmmakers, and other creators who depend on royalties are understandably unwilling to give their consent. But for 350 years, scholars have written peer-reviewed journal articles for impact, not for money, and are free to consent to open access without losing revenue. In this concise introduction, Peter Suber tells us what open access is and isn't, how it benefits authors and readers of research, how we pay for it, how it avoids copyright problems, how it has moved from the periphery to the mainstream, and what its future may hold. Distilling a decade of Suber's influential writing and thinking about open access, this is the indispe...

  13. Open innovation

    DEFF Research Database (Denmark)

    West, Joel; Bogers, Marcel

    2017-01-01

    Interest in open innovation (OI) as a field of research has grown exponentially since the phrase was coined by Chesbrough in his 2003 book, with numerous articles, special issues, books, and conference sessions. Various reviews of the literature have summarized prior work, offered new frameworks......, and identified opportunities for future research. Here we summarize these opportunities, which include more research on outbound OI, the role of open innovation in services, and network forms of collaboration such as consortia, communities, ecosystems, and platforms. Research should also examine the use of OI...... by small, new, and not-for-profit organizations, as well as the linkage of individual actions and motivations to open innovation. Other opportunities include better measuring the costs, benefits, antecedents, mediators and moderators of the effects of OI on performance, and understanding why and how OI...

  14. The 2015 Bioinformatics Open Source Conference (BOSC 2015).

    Science.gov (United States)

    Harris, Nomi L; Cock, Peter J A; Lapp, Hilmar; Chapman, Brad; Davey, Rob; Fields, Christopher; Hokamp, Karsten; Munoz-Torres, Monica

    2016-02-01

    The Bioinformatics Open Source Conference (BOSC) is organized by the Open Bioinformatics Foundation (OBF), a nonprofit group dedicated to promoting the practice and philosophy of open source software development and open science within the biological research community. Since its inception in 2000, BOSC has provided bioinformatics developers with a forum for communicating the results of their latest efforts to the wider research community. BOSC offers a focused environment for developers and users to interact and share ideas about standards; software development practices; practical techniques for solving bioinformatics problems; and approaches that promote open science and sharing of data, results, and software. BOSC is run as a two-day special interest group (SIG) before the annual Intelligent Systems in Molecular Biology (ISMB) conference. BOSC 2015 took place in Dublin, Ireland, and was attended by over 125 people, about half of whom were first-time attendees. Session topics included "Data Science;" "Standards and Interoperability;" "Open Science and Reproducibility;" "Translational Bioinformatics;" "Visualization;" and "Bioinformatics Open Source Project Updates". In addition to two keynote talks and dozens of shorter talks chosen from submitted abstracts, BOSC 2015 included a panel, titled "Open Source, Open Door: Increasing Diversity in the Bioinformatics Open Source Community," that provided an opportunity for open discussion about ways to increase the diversity of participants in BOSC in particular, and in open source bioinformatics in general. The complete program of BOSC 2015 is available online at http://www.open-bio.org/wiki/BOSC_2015_Schedule.

  15. Open Education and the Open Science Economy

    Science.gov (United States)

    Peters, Michael A.

    2009-01-01

    Openness as a complex code word for a variety of digital trends and movements has emerged as an alternative mode of "social production" based on the growing and overlapping complexities of open source, open access, open archiving, open publishing, and open science. This paper argues that the openness movement with its reinforcing structure of…

  16. Door-to-needle time for administration of fibrinolytics in acute ...

    African Journals Online (AJOL)

    Objectives. To determine the current door-to-needle time for the administration of fibrinolytics for acute myocardial infarction (AMI) in emergency centres (ECs) at three hospitals in Cape Town, and to compare it with the American Heart Association/American College of Cardiology (AHA/ACC) recommendation of 30 minutes ...

  17. Online uitlenen van e-books door bibliotheken: verkenning juridische mogelijkheden en economische effecten

    NARCIS (Netherlands)

    van der Noll, R.; Breemen, K.; Breemen, V.; Hugenholtz, B.; Brom, M.; Poort, J.

    2012-01-01

    Het uitlenen van e-books door openbare bibliotheken is in een groeiend aantal landen een realiteit. Dit rapport inventariseert deze praktijk en analyseert de juridische mogelijkheden voor en economische gevolgen van e-lending. In het economische deel van deze verkenning wordt onderzocht in welke

  18. The genetic basis of DOORS syndrome: an exome-sequencing study

    NARCIS (Netherlands)

    Campeau, Philippe M.; Kasperaviciute, Dalia; Lu, James T.; Burrage, Lindsay C.; Kim, Choel; Hori, Mutsuki; Powell, Berkley R.; Stewart, Fiona; Félix, Têmis Maria; van den Ende, Jenneke; Wisniewska, Marzena; Kayserili, Hülya; Rump, Patrick; Nampoothiri, Sheela; Aftimos, Salim; Mey, Antje; Nair, Lal D. V.; Begleiter, Michael L.; de Bie, Isabelle; Meenakshi, Girish; Murray, Mitzi L.; Repetto, Gabriela M.; Golabi, Mahin; Blair, Edward; Male, Alison; Giuliano, Fabienne; Kariminejad, Ariana; Newman, William G.; Bhaskar, Sanjeev S.; Dickerson, Jonathan E.; Kerr, Bronwyn; Banka, Siddharth; Giltay, Jacques C.; Wieczorek, Dagmar; Tostevin, Anna; Wiszniewska, Joanna; Cheung, Sau Wai; Hennekam, Raoul C.; Gibbs, Richard A.; Lee, Brendan H.; Sisodiya, Sanjay M.

    2014-01-01

    Deafness, onychodystrophy, osteodystrophy, mental retardation, and seizures (DOORS) syndrome is a rare autosomal recessive disorder of unknown cause. We aimed to identify the genetic basis of this syndrome by sequencing most coding exons in affected individuals. Through a search of available case

  19. The genetic basis of DOORS syndrome : an exome-sequencing study

    NARCIS (Netherlands)

    Campeau, Philippe M.; Kasperaviciute, Dalia; Lu, James T.; Burrage, Lindsay C.; Kim, Choel; Hori, Mutsuki; Powell, Berkley R.; Stewart, Fiona; Felix, Temis Maria; van den Ende, Jenneke; Wisniewska, Marzena; Kayserili, Huelya; Rump, Patrick; Nampoothiri, Sheela; Aftimos, Salim; Mey, Antje; Nair, Lal D. V.; Begleiter, Michael L.; De Bie, Isabelle; Meenakshi, Girish; Murray, Mitzi L.; Repetto, Gabriela M.; Golabi, Mahin; Blair, Edward; Male, Alison; Giuliano, Fabienne; Kariminejad, Ariana; Newman, William G.; Bhaskar, Sanjeev S.; Dickerson, Jonathan E.; Kerr, Bronwyn; Banka, Siddharth; Giltay, Jacques C.; Wieczorek, Dagmar; Tostevin, Anna; Wiszniewska, Joanna; Cheung, Sau Wai; Hennekam, Raoul C.; Gibbs, Richard A.; Lee, Brendan H.; Sisodiya, Sanjay M.

    Background Deafness, onychodystrophy, osteodystrophy, mental retardation, and seizures (DOORS) syndrome is a rare autosomal recessive disorder of unknown cause. We aimed to identify the genetic basis of this syndrome by sequencing most coding exons in affected individuals. Methods Through a search

  20. Diepe grondwatervervuiling door een bouwlandperceel in de 10-jaarszone van waterwingebied Putten

    NARCIS (Netherlands)

    Krajenbrink GJW

    1988-01-01

    In het kader van het stikstofproject heeft het RIVM onderzoek verricht naar de grondwaterverontreiniging tot max. 70 meter diepte onder- en benedenstrooms van een bouwlandperceel, omgeven door bos. Het water in de 180 meter dikke grofzandige freatische aquifer is gedetailleerd bemonsterd met

  1. 40 CFR 63.305 - Alternative standards for coke oven doors equipped with sheds.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 9 2010-07-01 2010-07-01 false Alternative standards for coke oven doors equipped with sheds. 63.305 Section 63.305 Protection of Environment ENVIRONMENTAL PROTECTION... SOURCE CATEGORIES National Emission Standards for Coke Oven Batteries § 63.305 Alternative standards for...

  2. Financiële verslaggeving door het Rijk vergeleken met IPSAS

    NARCIS (Netherlands)

    van Schaik, F.

    2014-01-01

    De Europese Commissie bereidt plannen voor om de financiële verslaggeving door de overheden van de lidstaten te harmoniseren met als doel een verbetering van transparantie en vergelijkbaarheid. De Europese schuldencrisis heeft duidelijk gemaakt dat de jaarrekeningen van de overheden van de lidstaten

  3. Modus operandi onderzoek naar door informatie en communicatie technologie (ICT) gefaciliteerde criminaliteit

    NARCIS (Netherlands)

    Junger, Marianne; Montoya, L.; Hartel, Pieter H.; Karemaker, M.

    Dit onderzoek beschrijft de invloed van ICT op de 'traditionele' misdrijven door te onderzoeken hoe delicten als inbraak, overvallen en fraude doordrongen zijn van ICT. In totaal zijn 136 woninginbraken, 140 commerciële inbraken, 259 bedreigingen en 274 fraudeza-ken onderzocht. Uit de resultaten

  4. Scheduling Trucks in a Cross-Dock with Mixed Service Mode Dock Doors

    DEFF Research Database (Denmark)

    Bodnar, Peter; Azadeh, Kaveh; Koster, René de

    2017-01-01

    The problem considered in this paper is how to schedule inbound and outbound trucks subject to time windows at a multidoor cross-dock. Dock doors can either be dedicated to inbound or outbound trucks or be capable of handling both truck types. In addition, loads are allowed to be temporarily...

  5. Leren bedrijfseconomische problemen op te lossen door het maken van vakspecifieke schema’s

    NARCIS (Netherlands)

    Slof, Bert; Erkens, Gijsbert; Kirschner, Paul A.

    2010-01-01

    Slof, B., Erkens, G., & Kirschner, P. A. (2010). Leren bedrijfseconomische problemen op te lossen door het maken van vakspecifieke schema’s [Learning to solve business-economics problems through constructing domainspecific diagrams]. Tijdschrift voor het Economisch Onderwijs (TEO), 110(4), 226–230.

  6. 30 CFR 57.8531 - Construction and maintenance of ventilation doors.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Construction and maintenance of ventilation... NONMETAL MINES Ventilation Underground Only § 57.8531 Construction and maintenance of ventilation doors... constructed of wood; (c) Maintained in good condition; (d) Self-closing, if manually operated; and (e...

  7. Effectieve kolonisatie van aardappelplanten door Dickeya-soorten (Erwinia chrysanthemi) : themanummer fytobacteriologie

    NARCIS (Netherlands)

    Wolf, van der J.M.; Czajkowski, R.L.; Velvis, H.

    2009-01-01

    De bacterieziekten zwartbenigheid en stengelnatrot, veroorzaakt door Pectobacterium en Dickeya (Erwinia)- soorten, berokkenen grote schade aan de pootaardappelteelt. Bij PRI en HZPC wordt onderzoek verricht naar de verspreiding van deze pathogenen tijdens teelt- en (na)oogst. Het was al bekend dat

  8. Bodemverontreiniging en de opname van lood in moestuingewassen : Risico's van lood door bodemverontreiniging

    NARCIS (Netherlands)

    Otte PF; Romkens PFAM; Rietra RPJJ; Lijzen JPA; LER; mev

    2012-01-01

    Lood uit bodemverontreinigingen wordt opgenomen door moestuingewassen die daarop worden geteeld. Deze gewassen kunnen een gezondheidsrisico vormen als zij worden geconsumeerd. Uit onderzoek van RIVM en Alterra blijkt nu dat bij hoge concentraties lood in de bodem de opname minder wordt. Hierdoor

  9. 3D Modeling of Building Indoor Spaces and Closed Doors from Imagery and Point Clouds

    Directory of Open Access Journals (Sweden)

    Lucía Díaz-Vilariño

    2015-02-01

    Full Text Available 3D models of indoor environments are increasingly gaining importance due to the wide range of applications to which they can be subjected: from redesign and visualization to monitoring and simulation. These models usually exist only for newly constructed buildings; therefore, the development of automatic approaches for reconstructing 3D indoors from imagery and/or point clouds can make the process easier, faster and cheaper. Among the constructive elements defining a building interior, doors are very common elements and their detection can be very useful either for knowing the environment structure, to perform an efficient navigation or to plan appropriate evacuation routes. The fact that doors are topologically connected to walls by being coplanar, together with the unavoidable presence of clutter and occlusions indoors, increases the inherent complexity of the automation of the recognition process. In this work, we present a pipeline of techniques used for the reconstruction and interpretation of building interiors based on point clouds and images. The methodology analyses the visibility problem of indoor environments and goes in depth with door candidate detection. The presented approach is tested in real data sets showing its potential with a high door detection rate and applicability for robust and efficient envelope reconstruction.

  10. The Romanesque Bronze Doors at Gniezno Cathedral Church: Some New Remarks

    Directory of Open Access Journals (Sweden)

    Tomasz Węcławowicz

    2017-06-01

    Full Text Available Among many Romanesque bronze doors in Europe the old entrance doors of the metropolitan cathedral in Gniezno, in the North Poland, are exceptional. For over a century many historians and historians of art have been trying to understand and explain its iconographic phenomenon. The Polish, Czech and German scholars have so far been unable to identify with any conviction, either the iconographic models or artistic provenance of the workshop. There were suggested some connections of the alleged bishop patrons to France and there were emphasizes technological possibilities of foundry workshops at the Meuse Valley. This “Meuse hypothesis” based mainly on historical suggestions became established as a certainty. However, it is important to emphasize the significant difference between the creator of the composition and of the craftsman who cast the bronze door. Years ago only Lech Kalinowski pointed out some general formal similarities to the North Italian sculpture. The purpose of this paper is to develop Kalinowski’s suggestions and to emphasise the puzzling similarities between details of Gniezno doors and some Emilian works executed by Master Wiligelmo da Modena and Master Nicolò. The concept of Italian relationship from Emilia province seems to be better for the comparative analysis than relationship with Meuse Valley based mostly on historical context. Crucial here is the additional, parallel analysis of the portal decoration in Czerwinsk Abbey.

  11. 30 CFR 77.303 - Hot gas inlet chamber dropout doors.

    Science.gov (United States)

    2010-07-01

    ... Section 77.303 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS, SURFACE COAL MINES AND SURFACE WORK AREAS OF UNDERGROUND... employ a hot gas inlet chamber shall be equipped with drop-out doors at the bottom of the inlet chamber...

  12. The Glass Door: The Gender Composition of Newly-Hired Workers Across Hierarchical Job Levels

    NARCIS (Netherlands)

    Hassink, W.H.J.|info:eu-repo/dai/nl/090437411; Russo, G.|info:eu-repo/dai/nl/124883206

    This paper examines the gender composition of the flow of new hirees along the organizational hierarchy of jobs. We find that women have a reduced chance to be hired at higher hierarchical levels. We refer to this phenomenon as the “glass door”. The glass door consists of an absolute and a relative

  13. The Open

    Directory of Open Access Journals (Sweden)

    Saitya Brata Das

    2009-12-01

    Full Text Available In the Open darkness and light, remembrance and oblivion, coming into existence and disappearing in death play their originary co-belonging, or co-figuration. Existence belongs to this opening and is exposed to its coming to presence: it is on the basis of this originary opening, this originary historical which is revealed to this mortal being called ‘man,’ on the basis of this revelation, man founds something like politics and history. There thus comes into existence out of this freedom, out of this “play space”2, this field called ‘polis’3 where there takes place war and festival, where historical revolutions tear apart history, brings ruptures and discontinuities in the very mode of his existence, where man seeks the foundation of his own foundation (which is his metaphysical task , where occurs the dialectics of negativity between man and man, where man puts at stake his own death, his own dissolution, and by the power of his own dissolution stands in relation to the total world that he seeks to dominate. This means that man’s attempts to metaphysically found his own political and historical existence must presuppose a far more originary non-foundation, the differentiating revealing of the open, the ungrounded spacing play, or playing space of natality and mortality.

  14. Open data

    DEFF Research Database (Denmark)

    Bodum, Lars

    2017-01-01

    Everyone wants open data, but the road towards it can be both difficult and long. Implementation of data portals and ICT solutions for support of the data infrastructure can be initiated from the central government through legislation, regulation and public procurement. This is what you would call...

  15. Open Images

    DEFF Research Database (Denmark)

    Sanderhoff, Merete

    2013-01-01

    Museums around the world hold enormous troves of public domain artworks. In digitized form, they can be powerful tools for research and learning, as well as building blocks, in the hands of students, teachers, scholars, developers, and creative people. By opening up their digitized assets for reuse...

  16. Radiation shielding techniques and applications. 3. Analysis of Photon Streaming Through and Around Shield Doors

    International Nuclear Information System (INIS)

    Barnett, Marvin; Hack, Joe; Nathan, Steve; White, Travis

    2001-01-01

    Westinghouse Safety Management Solutions (Westinghouse SMS) has been tasked with providing radiological engineering design support for the new Commercial Light Water Reactor Tritium Extraction Facility (CLWR-TEF) being constructed at the Savannah River Site (SRS). The Remote Handling Building (RHB) of the CLWR-TEF will act as the receiving facility for irradiated targets used in the production of tritium for the U.S. Department of Energy (DOE). Because of the high dose rates, approaching 50 000 rads/h (500 Gy/h) from the irradiated target bundles, significant attention has been made to shielding structures within the facility. One aspect of the design that has undergone intense review is the shield doors. The RHB has six shield doors that needed to be studied with respect to photon streaming. Several aspects had to be examined to ensure that the design meets the radiation dose levels. Both the thickness and streaming issues around the door edges were designed and examined. Photon streaming through and around a shield door is a complicated problem, creating a reliance on computer modeling to perform the analyses. The computer code typically used by the Westinghouse SMS in the evaluation of photon transport through complex geometries is the MCNP Monte Carlo computer code. The complexity of the geometry within the problem can cause problems even with the Monte Carlo codes. Striking a balance between how the code handles transport through the shield door with transport through the streaming paths, particularly with the use of typical variance reduction methods, is difficult when trying to ensure that all important regions of the model are sampled appropriately. The thickness determination used a simple variance reduction technique. In construction, the shield door will not be flush against the wall, so a solid rectangular slab leaves streaming paths around the edges. Administrative controls could be used to control dose to workers; however, 10 CFR 835.1001 states

  17. Open Source, Open Access, Open Review, Open Data. Initiativen zu mehr Offenheit in der digitalen Welt

    OpenAIRE

    Herb, Ulrich

    2011-01-01

    The article discusses the principles of openess, open access and open availability of information based on the examples of open access to scientific information, open government data, open geographical data and open source software.

  18. The narrow entrance door of Brazil's national health system (SUS: an evaluation of accessibility in the family health strategy

    Directory of Open Access Journals (Sweden)

    Ana Lucia Martins de Azevedo

    2010-01-01

    Full Text Available This study has the purpose of analyzing users' perception of the accessibility to Estratégia Saúde da Família (ESF - Family Health Strategy in its geographical, organizational, socio-cultural and economic dimensions. Process evaluation with qualitative approach through open interview, direct observation and documental analysis was performed in the city of Recife, northeastern Brazil. The main problems were: the deficient referral and counter-referral system; delayed return of laboratory test results; excessive number of families per team; difficulties in scheduling medical consultations; expenditures on medicines. Facilities were observed in the professional-user relationship, as well as in the geographical proximity of the health unit. ESF proved to be a narrow entrance door to Sistema Único de Saúde (SUS - Brazil's National Health System. Therefore, it deserves to be evaluated with a more critical look that takes into account, as a starting point, the needs of individuals who request its actions, as well as the reasoning which guides the actions of the subjects involved in care.

  19. The role of door orientation on occupant injury in a nearside impact: a CIREN, MADYMO modeling and experimental study.

    Science.gov (United States)

    Tencer, Allan F; Kaufman, Robert; Huber, Philippe; Mock, Charles

    2005-12-01

    This study addressed the effects of vehicle height mismatch in side impact crashes. A light truck or SUV tends to strike the door of a passenger car higher causing the upper border to lead into the occupant space. Conversely, an impact centered lower on the door, from a passenger car, causes the lower border to lead. We proposed the hypothesis that the type of injury sustained by the occupant could be related to door orientation during its intrusion into the passenger compartment. Data on door orientation and nearside occupant injuries were collected from 125 side impact crashes reported in the CIREN database. Experimental testing was performed using a pendulum carrying a frame and a vehicle door, impacting against a USDOT SID. The frame allowed the door orientation to be changed. A model was developed in MADYMO (v 6.2) using the more biofidelic dummies, BIOSID, and SIDIIs as well as USDOT SID. In side impact crashes with the lower border of the door leading, 81% of occupants sustained pelvic injury, 42% suffered rib fractures, and the rate of organ injury was 0.84. With the upper border leading, 46% of occupants sustained pelvic injury, 71% sustained rib fracture, and the rate of organ injuries per case increased to 1.13. The differences in the groups with respect to pelvic injury were significant at p = 0.01, rib fracture, p = 0.10, and organ injury, p = 0.001. Experimental testing showed that when the door angle changed from lower to upper border leading, peak T4 acceleration increased by 273% and pelvic acceleration decreased by 44%. The model demonstrated that when the door angle changed from lower to upper border leading, the USDOT SID showed a 29% increase in T4 acceleration and a 57% decrease in pelvic acceleration. The BIOSID dummy demonstrated a 36% increase in T1 acceleration, a 44% increase in abdominal rib 1 deflection, a 91% increase in thoracic rib 1 deflection, and a 33% decrease in pelvic acceleration. These data add more insight to the problem of

  20. Open areas and open access

    International Nuclear Information System (INIS)

    Thorndike, A.M.

    1979-01-01

    The main objective of the two open areas in the present ISABELLE design has been to provide flexibility with respect to the size and shape of experimental equipment that would eventually be installed there. No permanent building would be installed initially. One possibility would be to enclose each experiment in a temporary structure that would provide weatherproofing and shielding; another possibility would be to erect a permanent building at a later time, when experience has made the needs clearer than they are at present. The secondary objective of the design of open areas has been to keep initial costs as low as practicable. Another objective might be added, however, which we indicate by the term ''open access.'' This note will explore this idea and some design concepts based on it. In the ISABELLE 1977 summer workshop there was considerable discussion of the importance of techniques for inserting large pieces of experimental equipment quickly and removing them with equal ease and speed. Since enclosed halls have certain restrictions in this respect, open areas may be helpful in providing this feature. If the mechanical and electrical aspects could be handled quickly, one might even attempt to reduce the time spent on bureaucratic procedures in order to expedite the introduction of new experiments and new ideas in these areas

  1. OpenAPC. Open-Access-Publikationskosten als Open Data

    OpenAIRE

    Tullney, Marco

    2015-01-01

    Präsentationsfolien zum Vortrag „OpenAPC. Open-Access-Publikationskosten als Open Data“ in der Session „Ausgestaltung eines wissenschaftsadäquaten APC-Marktes: Grundsätze, Finanzierungsansätze und Management“ der Open-Access-Tage 2015 in Zürich (https://www.open-access.net/community/open-access-tage/open-access-tage-2015-zuerich/programm/#c1974)

  2. Opening remarks

    International Nuclear Information System (INIS)

    Kyd, D.R.

    1993-11-01

    In his opening remarks Mr. David R. Kyd briefly described the IAEA mission. Then he outlined main aim of the seminar which is bring together journalists, educators, officials and other specialists to let them hear and put questions to experts on various aspects of nuclear energy and techniques. Further he analyzed problems and prospects of energy development in Asia and particularly in China, including environmental considerations. The final part of the remarks was devoted comparative evaluation of different energy production technologies

  3. Open Pneumothorax

    Directory of Open Access Journals (Sweden)

    Bart Paull

    2017-07-01

    Full Text Available History of present illness: A 27-year-old male was transported to the emergency department by emergency medical services after crashing his motorcycle into a guardrail. Upon presentation he was alert, normotensive, and tachypneic. Significant findings: A large chest wound was clinically obvious. A chest radiograph performed after intubation showed subcutaneous emphysema, an anterior rib fracture, and a right-sided pneumothorax. He was then taken to the operating room for further management. Discussion: Thoracic injuries are responsible for one-quarter of all trauma-related deaths. Following rib fracture, pneumothorax is the second most common thoracic injury, occurring in 30% of patients with thoracic trauma. An open pneumothorax occurs when a chest wall injury results in direct communication between the atmosphere and pleura.1-2 It is estimated that open pneumothorax occurs in 80% of all penetrating chest wounds, with stab wounds being more common than gunshot wounds or impalement. Open pneumothoraces can lead to ventilatory insufficiency and rapid respiratory decompensation.2 Advanced Trauma Life Support recommends that the initial management of an open pneumothorax is placement of an occlusive dressing taped on three sides to create a ‘flutter-valve’ mechanism. This should then be followed by tube thoracostomy and repair of the chest wall defect.3 The placement of an occlusive dressing or initial wound closure without subsequent tube thoracostomy may result in the development of a tension pneumothorax.2 The patient was intubated and mechanical ventilation was initiated without complication. Due to the large size of the wound, an occlusive dressing was not placed in the emergency department and the patient was rapidly transported to the operating room for further management. In the operating room two chest tubes were placed. Operative findings included a right hemopneumothorax, multiple rib fractures, and a manubrial fracture. After

  4. Opening address

    International Nuclear Information System (INIS)

    Ianko, L.

    1993-01-01

    This short talk was the opening remarks to the attendees at this conference, presented by the Scientific Secretary, IWG-LMNPP, of the IAEA. This meeting is an effort to aid research on problems related to the general area of nuclear plant aging and life management. In particular it addresses fracture properties of reactor materials and components, both as installed, and at end of service condition. A major concern is relating measurements made on laboratory samples to properties displayed by actual reactor components

  5. Barriers to and enablers for European rail freight transport for integrated door-to-door logistics service. Part 1: Barriers to multimodal rail freight transport

    Directory of Open Access Journals (Sweden)

    Dewan Md Zahurul ISLAM

    2014-09-01

    Full Text Available The objective of this paper is to examine and identify barriers to and enablers for the European rail freight transport services as a transport chain partner along the supply chains in the changing market scenario. The changing market scenario includes, among others, requiring 'door-to-door' rather than 'terminal to terminal' and integrated service, competitive ability to attract non-rail cargo type, changes in the customer requirements (e.g. reliable service and changes in the operational requirements and practices. Using a literature review method, the paper is presented in two parts. The part 1 focuses on the identification of barriers to the European rail freight service by reviewing freight logistics services for global supply chains followed by the current performance of European rail freight transport followed by a discussion on the rail freight market liberalisation in Europe. Then rail freight transport in the Unites States (U.S. is discussed. The research notes that although the background, scope and necessity for reform measures in Europe differ from those of the U.S., some lessons can be learned and the main lesson is that an appropriate reform measure can enhance rail sector competitive ability in Europe. Examining and identifying the barriers in the part 1 (with the pan-Pacific examples of rail freight transports, the part 2 of the paper focuses on recommending clear actions and steps as enablers for the rail freight industry in general and operators in particular. The research in part 1 of the paper finds that: •\tIn many European countries, the rail freight market is not fully liberalised. In such market segment, infrastructure managers do act independently for incumbents and new entrant operators that hamper the progress of building a competitive market; •\tThe rail operators have not yet achieved the service quality (e.g. customer tailored service needed for the modern supply chains; •\tThey operate

  6. A knitting legacy: Linda Newington opens up the doors to the University of Southampton’s fascinating knitting collections

    OpenAIRE

    Newington, Linda

    2011-01-01

    Our fascination with the knitwear of the past seems to know no bounds - the classic, elegant knits of yesteryear continue to inspire and influence designers and knitters alike. Working to collect, preserve and share these patterns is the University of Southampton Library, whose Knitting Collections contain more than 12,000 patterns from the early 20th century to the present day.The Library holds the resources of three renowned figures from the world of knitting: Montse Stanley, Richard Ruttan...

  7. Elucidation of salicylate attachment in celesticetin biosynthesis opens the door to create a library of more efficient hybrid lincosamide antibiotics

    Czech Academy of Sciences Publication Activity Database

    Kadlčík, Stanislav; Kameník, Zdeněk; Vašek, Daniel; Nedvěd, Michal; Janata, Jiří

    2017-01-01

    Roč. 8, č. 5 (2017), s. 3349-3355 ISSN 2041-6520 R&D Projects: GA MŠk(CZ) LQ1604 Institutional support: RVO:61388971 Keywords : BIOCHEMICAL-CHARACTERIZATION * STREPTOMYCES-CAELESTIS * LINCOMYCIN Subject RIV: EE - Microbiology, Virology OBOR OECD: Microbiology Impact factor: 8.668, year: 2016

  8. [War and medicine in a culture of peace. 1. When the doors of the Janus temple open].

    Science.gov (United States)

    Piérard, G E

    2001-11-01

    More than 40 major wars took place during the past decade. The origins and the warlike means that were engaged were very different from those of older conflicts. Wars between nations are less numerous. They have been replaced by civilian wars that are more rooted on cultural and religious grounds than on economic interests alone. During this short period of time, warfare was responsible for about 2 millions of direct deaths and 20 millions displaced people and refugees. The injured and victims of starvation and epidemics were innumerable and awaited for civilian medical help.

  9. Early Intervention Programs. Opening the Door to Higher Education. ASHE-ERIC Higher Education Report Vol. 25, No. 6.

    Science.gov (United States)

    Fenske, Robert H.; Geranios, Christine A.; Keller, Jonathan E.; Moore, David E.

    This report addresses issues related to the increasing growth of early intervention programs to encourage high school graduation and college attendance among students from low-income and minority groups. It first presents a brief review of the societal goals of equality for the nation's education system. It then defines the programs "early…

  10. Performance Measures for Teachers and Teacher Education: Corporate Education Reform Opens the Door to New Legal Issues

    Science.gov (United States)

    Pullin, Diana

    2015-01-01

    Recent efforts to change the teaching profession and teacher preparation include a number of innovations to use portfolio assessment, value added measures (VAM), accountability metrics and other corporate education reform ideas. These approaches may provoke considerable potential legal consequences. Traditional constitutional and civil rights…

  11. Variability of female responses to conspecific vs. heterospecific male mating calls in polygynous deer: an open door to hybridization?

    Directory of Open Access Journals (Sweden)

    Megan T Wyman

    Full Text Available Males of all polygynous deer species (Cervinae give conspicuous calls during the reproductive season. The extreme interspecific diversity that characterizes these vocalizations suggests that they play a strong role in species discrimination. However, interbreeding between several species of Cervinae indicates permeable interspecific reproductive barriers. This study examines the contribution of vocal behavior to female species discrimination and mating preferences in two closely related polygynous deer species known to hybridize in the wild after introductions. Specifically, we investigate the reaction of estrous female red deer (Cervus elaphus to playbacks of red deer vs. sika deer (Cervus nippon male mating calls, with the prediction that females will prefer conspecific calls. While on average female red deer preferred male red deer roars, two out of twenty females spent more time in close proximity to the speaker broadcasting male sika deer moans. We suggest that this absence of strict vocal preference for species-specific mating calls may contribute to the permeability of pre-zygotic reproductive barriers observed between these species. Our results also highlight the importance of examining inter-individual variation when studying the role of female preferences in species discrimination and intraspecific mate selection.

  12. Opening the Door: The Experience of Chronic Critical Illness in a Long-Term Acute Care Hospital.

    Science.gov (United States)

    Lamas, Daniela J; Owens, Robert L; Nace, R Nicholas; Massaro, Anthony F; Pertsch, Nathan J; Gass, Jonathon; Bernacki, Rachelle E; Block, Susan D

    2017-04-01

    Chronically critically ill patients have recurrent infections, organ dysfunction, and at least half die within 1 year. They are frequently cared for in long-term acute care hospitals, yet little is known about their experience in this setting. Our objective was to explore the understanding and expectations and goals of these patients and surrogates. We conducted semi-structured interviews with chronically critically ill long-term acute care hospital patients or surrogates. Conversations were recorded, transcribed, and analyzed. One long-term acute care hospital. Chronically critically ill patients, defined by tracheotomy for prolonged mechanical ventilation, or surrogates. Semi-structured conversation about quality of life, expectations, and planning for setbacks. A total of 50 subjects (30 patients and 20 surrogates) were enrolled. Thematic analyses demonstrated: 1) poor quality of life for patients; 2) surrogate stress and anxiety; 3) optimistic health expectations; 4) poor planning for medical setbacks; and 5) disruptive care transitions. Nearly 80% of patient and their surrogate decision makers identified going home as a goal; 38% were at home at 1 year. Our study describes the experience of chronically critically ill patients and surrogates in an long-term acute care hospital and the feasibility of patient-focused research in this setting. Our findings indicate overly optimistic expectations about return home and unmet palliative care needs, suggesting the need for integration of palliative care within the long-term acute care hospital. Further research is also needed to more fully understand the challenges of this growing population of ICU survivors.

  13. The best and brightest. Concern over tomorrow's workforce opens new doors for education and training in nuclear fields

    International Nuclear Information System (INIS)

    Wedekind, Lothar

    2001-01-01

    The article discusses the results of a study by the Nuclear Energy Agency to address concerns about downward trends in nuclear education and training at universities. The implications of a shortage of trained nuclear energy specialists are discussed

  14. Open access, open education resources and open data in Uganda ...

    African Journals Online (AJOL)

    As a follow up to OpenCon 2014, International Federation of Medical Students' Associations (IFMSA) students organized a 3 day workshop Open Access, Open Education Resources and Open Data in Kampala from 15-18 December 2014. One of the aims of the workshop was to engage the Open Access movement in ...

  15. Perancangan dan Proses Pembuatan Inner Door Panel Mobil Pick Up Multiguna

    Directory of Open Access Journals (Sweden)

    Bambang Prayogi

    2014-09-01

    Full Text Available Sejak tahun 2012 Jurusan Teknik Mesin bekerja sama dengan PT. INKA mengembangkan mobil murah multigna. Mobil pick up tersebut diberi nama GEA. Pengembangan dilakukan pada body, chasis dan engine. Sebagai bagian dari body, pintu mobil juga akan dikembangkan. Pada tahun 2013, penelitian terhadap posisi handle pengatur kaca jendela atau window regulator mobil pick up GEA telah dilakukan. Evaluasi tersebut mengharuskan adanya perubahan desain dari inner door panel. Suatu rancangan pengembangan desain inner door panel perlu dilakukan agar inner door panel dapat diproduksi secara massal. Langkah-langkah penelitian yang dilakukan meliputi penyusunan list of requirement untuk pengembangan konsep, analisa getaran dan tegangan yang terjadi pada panel dengan bantuan software CATIA. Selanjutnya perancangan proses pembuatan dan perancangan punch and dies-nya dilakukan. Dari analisa getaran yang dilakukan, dapat diketahui inner door panel memiliki frekuensi natural sebesar 166,94 Hz (10.016,4 rpm artinya panel aman dan tidak terpengaruh oleh getaran dari mesin mobil. Tegangan yang terjadi pada inner door panel akibat gaya pembebanan pada handle pintu bagian dalam adalah 2,9159 x 107 Pa (2,97 Kg/mm2 sehingga lebih kecil dari tegangan ijin materialnya 13,94 Kg/mm2 dan rancangan masih berada dalam kategori aman. Untuk membuat inner door panel dilakukan 3 macam proses pembentukan yaitu trimming, embossing dan piercing. Total gaya pembentukan masing-masing proses sebagai berikut: Gaya pembentukan proses trimming = 48.96 ton, proses embossing = 26.89 ton dan proses piercing = 41.66 ton. Window regulator yang disarankan untuk digunakan pada mobil pick up multiguna ini adalah scissor type window regulator dengan tenaga penggerak manual. Pada perancangan punch and dies, tegangan kompresi masing-masing proses dihitung dan hasilnya adalah sebagai berikut: Tegangan kompresi proses trimming 0.11 Kg/mm2, tegangan kompresi proses embossing 0.28 Kg/mm2, tegangan kompresi

  16. Will this open space work?

    Science.gov (United States)

    Vischer, J

    1999-01-01

    Northern Oil is moving offices, and CEO Fritz Schumacher wants to make the most of the move in this fictional case study. He believes that adopting an open-plan work space will reinvent how the company works, not to mention cut costs. Facilities manager Sasha Pasternak also supports the open plan. Her job would be easier, and her budget would stretch further, if Northern had standardized workstations and used partitions, not walls. And she likes the way the new design flattens the organization: everyone has the same amount of space and the same ergonomically sound furniture. The new building would have more conference rooms and just-in-time work spaces for employees who worked mostly off-site. And although she knew that initial meetings between the architects and Northern employees hadn't yielded much support for open space--people were attached to their private offices--she expected that people would warm to the idea. But when the new design was unveiled, employees were less than enthusiastic. They hurled questions like, How will workers concentrate if they can't shut their office doors? How will people have confidential meetings with their boss? And why would people stay at Northern when the competition offers them private offices? There was even talk of circulating a petition refusing to move to the new space. A week later, the architect presented revised plans to the project group. The new options would add costs and reduce the amount of space savings, but offering a choice to employees might make them feel less threatened. What should the project team do? Five commentators offer advice.

  17. Open areas and open access

    International Nuclear Information System (INIS)

    Thorndike, A.M.

    1978-01-01

    One objective of the two open areas in the present ISABELLE design is to provide flexibility with respect to the size and shape of experimental equipment that would eventually be installed there. No permanent building would be installed initially. A second objective of the design of open areas is to keep initial costs as low as practicable. Another objective is open access. This note explores this idea and some design concepts based on it. It would permit inserting large pieces of experimental equipment quickly and removing them with equal ease and speed. Entire experiments would be moved in a single piece (or a few) by building them on movable platforms with capacities of up to about 1000 tons per platform. Most experiments could be built on a single platform or on a few. The shielding must also be moved. It must also be organized into a small number of large units. A scheme using large tanks filled with water is described. It is important to make the equipment on a given platform as complete and self-contained as possible, with a minimum of interconnections for power, coolant, controls, data transmission, etc. 5 figures

  18. Opening remarks

    International Nuclear Information System (INIS)

    Southwood, Richard

    1987-01-01

    General opening remarks to a conference on the effects of low-level radiation on man, exploring particularly areas where disagreements have most frequently been voiced. The author comments on two approaches: a) the study, stepwise of putative cause and effect chains, using models which are tested by comparing calculated and observed effects. b) the epidemiological approach by extensive correlative study of cause, correlations and effect. Attention is drawn to the confidence to be accorded to any quantitative theory supported by both approaches, and the need for further analysis if the approaches give different indications. (U.K.)

  19. Open University

    CERN Multimedia

    Pentz,M

    1975-01-01

    Michel Pentz est née en Afrique du Sud et venu au Cern en 1957 comme physicien et président de l'associaion du personnel. Il est également fondateur du mouvement Antiapartheid de Genève et a participé à la fondation de l'Open University en Grande-Bretagne. Il nous parle des contextes pédagogiques, culturels et nationaux dans lesquels la méthode peut s'appliquer.

  20. Opening lecture

    International Nuclear Information System (INIS)

    Thomas, J.B.

    1997-01-01

    The opening lecture on the results of fifty years in the nuclear energy field, deals with the main principles underlying the CEA policy concerning the fission nuclear energy transformation, i.e. the design of a nuclear industry that is a safe, high-performance and reliable source of electric power, the development of an adaptive power generation tool with the capacity to progress according to new constraints, and the necessary anticipation for preparing to the effects of the next 50 year technological leaps

  1. [Discussion on relationship between "living alone with closed windows and doors" and depression].

    Science.gov (United States)

    Liu, Fengfeng; Li, Rui

    2018-03-12

    "Living alone with closed windows and doors"was mentioned in the pathological manifestations of stomach meridian of foot- yangming in Neijing ( The Inner Canon of Huangdi ), which is similar to the symptoms of depression. Currently the treatment of depression is mostly based on"spirit being stored in five organs"theory, and little attention is paid on stomach meridian of foot- yangming . From the pathological manifestations of"living alone with closed windows and doors"in stomach meridian of foot- yangming , the relationship between stomach meridian and depression is discussed from ying-yang and qi -blood. In addition, the close relationship between the stomach meridian and qi -blood, qi movement of five organs, heart and brain is discussed to explore the mechanism of treating depression. In conclusion, the literature and modern research regarding treating depression from stomach meridian are summarized, hoping to provide more clinical methods for the treatment of depression.

  2. Improved Harmony Search Algorithm for Truck Scheduling Problem in Multiple-Door Cross-Docking Systems

    Directory of Open Access Journals (Sweden)

    Zhanzhong Wang

    2018-01-01

    Full Text Available The key of realizing the cross docking is to design the joint of inbound trucks and outbound trucks, so a proper sequence of trucks will make the cross-docking system much more efficient and need less makespan. A cross-docking system is proposed with multiple receiving and shipping dock doors. The objective is to find the best door assignments and the sequences of trucks in the principle of products distribution to minimize the total makespan of cross docking. To solve the problem that is regarded as a mixed integer linear programming (MILP model, three metaheuristics, namely, harmony search (HS, improved harmony search (IHS, and genetic algorithm (GA, are proposed. Furthermore, the fixed parameters are optimized by Taguchi experiments to improve the accuracy of solutions further. Finally, several numerical examples are put forward to evaluate the performances of proposed algorithms.

  3. Development of a Thin-Wall Magnesium side door Inner Panel for Automobiles

    Energy Technology Data Exchange (ETDEWEB)

    Jekl, J.; Auld, J.; Sweet, C.; Carter, Jon; Resch, Steve; Klarner, A.; Brevick, J.; Luo, A.

    2015-05-17

    Cast magnesium side door inner panels can provide a good combination of weight, functional, manufacturing and economical requirements. However, several challenges exist including casting technology for thin-wall part design, multi-material incompatibility and relatively low strength vs steel. A project has been initiated, supported by the US Department of Energy, to design and develop a lightweight frame-under-glass door having a thin-wall, full die-cast, magnesium inner panel. This development project is the first of its kind within North America. Phase I of the project is now complete and the 2.0mm magnesium design, through casting process enablers, has met or exceeded all stiffness requirements, with significant mass reduction and part consolidation. In addition, a corrosion mitigation strategy has been established using industry-accepted galvanic isolation methods and coating technologies.

  4. Five-year experience with burns from glass fireplace doors in the pediatric population.

    Science.gov (United States)

    Baryza, Mary Jo; Hinson, Michelle; Conway, Jennifer; Ryan, Colleen M

    2013-01-01

    Burns from contact with glass doors of gas fireplaces have been previously reported. The purpose of this study is to examine the incidence and severity of this injury in our population. Patients were identified for inclusion in the retrospective chart review study using the National Trauma Registry of the American College of Surgeons (NTRACS) and our local outpatient database. Criteria for inclusion were burn injuries sustained from contact with fireplace glass doors treated at our pediatric burn center from 2007 through 2011. Fifty children met these criteria, including two children whose burns were caused by electric fireplace glass doors. BSA burned was 1.5 ± 1.5% (mean ± SD), range 0.5 to 10%. Age was 27.2 ± 27.3 months, range 8 months to 13 years. Forty-five children (90%) had hand burns; of these, 18 children had bilateral hand involvement. Facial burns were found in three children (6%), and eight children (16%) had other areas burned. One patient developed cellulitis. Two patients required surgery. Six children (12%) required hospitalization; mean length of stay was 5.8 ± 5 days, range 1 to 5 days. Although the number of inpatient admissions was relatively few, 329 outpatient visits and 309 rehabilitation visits were required for treatment of these children. Nineteen patients (38%) required splints and six patients (12%) required scar treatment with pressure garments. Burns from contact with fireplace glass doors are a recurring problem. Toddlers are most at risk. Directed preventive strategies including parent education, safety warnings, and design modifications such as temperature sensors and barrier screens could be potentially helpful in reducing the incidence of this injury.

  5. Environmental pollution by sea-going vessels. Review for 2010; Milieuvervuiling door zeeschepen. Terugblik 2010

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-12-15

    This review study looks at what has happened with the recommendations of the Dutch Court of Audit report on Environmental pollution by sea-going vessels of 2001. A closer look has been taken at the promises made by the Dutch Ministers of Transport and Justice. These recommendations were related to the bottlenecks that were observed in the efforts to prevent pollution by sea-going vessels, resulting from cleaning up pollution at sea and in the prosecution of parties causing pollution. [Dutch] In dit terugblikonderzoek zijn we nagegaan wat er is gebeurd met de aanbevelingen uit het Rekenkamerrapport Milieuvervuiling door zeeschepen van 2001. We hebben gekeken hoe het staat met de toezeggingen die indertijd zijn gedaan door de ministers van Verkeer en Waterstaat (VenW) en van Justitie. Onze aanbevelingen hadden betrekking op knelpunten die wij hadden gesignaleerd bij de inspanningen ter voorkoming van vervuiling door zeeschepen, bij het opruimen van verontreinigingen op zee en bij de vervolging van de veroorzakers van vervuiling.

  6. Construction and testing of a blower-door assembly for regulation of air pressure within structures

    International Nuclear Information System (INIS)

    Steele, W.D.

    1987-09-01

    The Technical Measurements Center is evaluating several methods to decrease the time required to determine an annual average radon-daughter concentration in structures. One method involves stabilizing the air pressure within the structure at a constant pressure with reference to external atmospheric or soil-gas pressure. This report describes the construction and preliminary testing of a blower-door system to maintain a constant differential air pressure within a structure. The blower-door assembly includes a collapsible frame and a large fan to occlude a doorway, a damper with an actuator to control air flow, a controller to drive the damper actuator, and a pressure transducer to measure the differential pressure. Preliminary testing of the system indicates that pressure within the structure in the range of 1 to 20 Pascals can be held to within approximately +-1 Pa of the set point. Further testing of the blower-door system is planned to provide data on the applicability of this method to short-duration tests for annual average radon-daughter concentration estimates. 13 figs., 1 tab

  7. Magnesium-made door frame for passenger cars; Pkw-Tuerrahmen aus Magnesium

    Energy Technology Data Exchange (ETDEWEB)

    Tikal, F.; Vollmer, C. [Kassel Univ. (Gesamthochschule) (Germany). Inst. fuer Produktionstechnik und Logistik

    1997-11-01

    One of the most complicated parts of a car is the door. An so it will be in the future. More and more parts will be integrated in a car`s door, especially safety and comfort related parts as well as a big number of functional elements. The car industry tries intensively to bring about a growing safety image to its buyers. At the Institute for Technical Production and Logistics (IPL) of the University of Kassel (GhK) a passenger door construction out of magnesium has been developed on the base of a foregoing construction. With the new practice orientated model the time of production could be essentially reduced while at the same time the weight could be decreased. (orig.) [Deutsch] Am Institut fuer Produktionstechnik und Logistik (ipl) der Universitaet Gesamthochschule Kassel wurde ein optimierter Magnesium-Druckguss-Rahmen fuer eine Pkw-Tuer, basierend auf einer vorangegangenen Arbeit, entwickelt. Mit dem neuen praxisnahen Modell konnte die Montagezeit erheblich reduziert und Gewicht eingespart werden. (orig.)

  8. CA Air Resource Board's Off-Road Diesel Equipment Regulation 2017 DOORS Reporting.

    Energy Technology Data Exchange (ETDEWEB)

    Jadhav, Pradnya [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2018-02-01

    Sandia National Laboratories/CA (SNL/CA) operates 14 diesel vehicles subject to the Off-Road Diesel Equipment Regulation; all the vehicles are classified as low-use vehicles. Annually, SNL/CA must report to the CA Air Resources Board (ARB) the hour-meter readings on our Off-Road Low-Use Diesel Equipment. This is to verify to the CA ARB that our equipment is being operated less than 200 hr/yr and therefore is considered “low-use” and not subject to the strict emissions standards for off-road diesel equipment. The reporting is done using DOORS, the CA ARB’s on-line reporting tool. The hour meter data for CY2017 has already been submitted using DOORS. The final step in the annual reporting process, which needs to be done by DOE, is to submit the Responsible Official Affirmation of Reporting (ROAR), which affirms that the information reported using DOORS is accurate. The ROAR is to be signed by a “Responsible Official” and can be submitted as a hardcopy ROAR or an electronic ROAR (e-ROAR) by March 1st, 2018. CA ARB’s preferred mechanism of ROAR submission is by using the e-ROAR.

  9. External debt and capital flight in Nigeria: Is there a revolving door?

    Directory of Open Access Journals (Sweden)

    OT Ajilore

    2014-10-01

    Full Text Available Using the residual method of capital flight estimation, this paper estimates Nigerian capital flight over the period 1970 - 2001 and finds a close correlation between external debt and capital flight flows. This phenomenon suggests a paradoxical revolving door of a bi-directional flow of capital, i.e. where capital enters the country in the guise of external borrowing and simultaneously slips out of the country as private capital flight. The research question addressed by this paper is whether such a financial revolving door relationship exists in Nigeria, just as previous empirical researches had established in a number of countries. The paper utilises a simultaneous equation model and three stage least square estimation technique (3SLS, in addition to two-way Granger causality tests, to obtain statistical evidence that confirms the existence of a financial revolving door relationship between the two endogenous variables. In addition, existence of stronger causality from debt to capital flight is instrumental in showing that growing public deficit and the resulting increase in external debt is being used as a transfer mechanism for capital flight.

  10. Measuring Modularity in Open Source Code Bases

    Directory of Open Access Journals (Sweden)

    Roberto Milev

    2009-03-01

    Full Text Available Modularity of an open source software code base has been associated with growth of the software development community, the incentives for voluntary code contribution, and a reduction in the number of users who take code without contributing back to the community. As a theoretical construct, modularity links OSS to other domains of research, including organization theory, the economics of industry structure, and new product development. However, measuring the modularity of an OSS design has proven difficult, especially for large and complex systems. In this article, we describe some preliminary results of recent research at Carleton University that examines the evolving modularity of large-scale software systems. We describe a measurement method and a new modularity metric for comparing code bases of different size, introduce an open source toolkit that implements this method and metric, and provide an analysis of the evolution of the Apache Tomcat application server as an illustrative example of the insights gained from this approach. Although these results are preliminary, they open the door to further cross-discipline research that quantitatively links the concerns of business managers, entrepreneurs, policy-makers, and open source software developers.

  11. Opening keynote

    International Nuclear Information System (INIS)

    Rae, B.

    1997-01-01

    In his opening address, the former premier of Ontario summarized the background of the Macdonald Committee which was appointed by his government after it became increasingly apparent that the infrastructure of Hydro Ontario was far bigger than the province and the economy could afford, and that the service that had once given Ontario tremendous competitive advantage, in the form of relatively cheap electric power, had become unsustainable in an era of economic downturn and zero inflation. He stated that the debate about Hydro is part of a broader issue, and it is no longer possible to manage our electricity system as if we were a self-enclosed universe. He predicted that the North American electricity grid will become increasingly interdependent, and that Hydro will have to develop competitive price structures, both to hold its domestic market share and to compete for export sales. He outlined the most pressing issues for Hydro as being debt reduction, while pursuing internal changes to make the organization more efficient. Organizational changes such as the creation of Ontario Hydro International, Ontario Hydro Research, separation of generation operations from the grid, and establishment of separate price and efficiency targets for the autonomous organizations within the utility family, were moves in the right direction. Equally important is to make sure that however Hydro might develop in the future, it is going to be fair to customers, and that the billions of dollars invested in Hydro by Ontario taxpayers over the years, are safeguarded

  12. Openness initiative

    International Nuclear Information System (INIS)

    Duncan, S.S.

    1995-01-01

    Although antinuclear campaigns seem to be effective, public communication and education efforts on low-level radioactive waste have mixed results. Attempts at public information programs on low-level radioactive waste still focus on influencing public opinion. A question then is: open-quotes Is it preferable to have a program focus on public education that will empower individuals to make informed decisions rather than trying to influence them in their decisions?close quotes To address this question, a case study with both quantitative and qualitative data will be used. The Ohio Low-Level Radioactive Waste Education Program has a goal to provide people with information they want/need to make their own decisions. The program initiated its efforts by conducting a statewide survey to determine information needed by people and where they turned for that information. This presentation reports data from the survey and then explores the program development process in which programs were designed and presented using the information. Pre and post data from the programs reveal attitude and knowledge shifts

  13. Openness initiative

    Energy Technology Data Exchange (ETDEWEB)

    Duncan, S.S. [Los Alamos National Lab., NM (United States)

    1995-12-31

    Although antinuclear campaigns seem to be effective, public communication and education efforts on low-level radioactive waste have mixed results. Attempts at public information programs on low-level radioactive waste still focus on influencing public opinion. A question then is: {open_quotes}Is it preferable to have a program focus on public education that will empower individuals to make informed decisions rather than trying to influence them in their decisions?{close_quotes} To address this question, a case study with both quantitative and qualitative data will be used. The Ohio Low-Level Radioactive Waste Education Program has a goal to provide people with information they want/need to make their own decisions. The program initiated its efforts by conducting a statewide survey to determine information needed by people and where they turned for that information. This presentation reports data from the survey and then explores the program development process in which programs were designed and presented using the information. Pre and post data from the programs reveal attitude and knowledge shifts.

  14. Medium-to-high prevalence of screening-detected parkinsonism in the urban area of Tehran, Iran: data from a community-based door-to-door study

    Directory of Open Access Journals (Sweden)

    Fereshtehnejad SM

    2015-02-01

    Full Text Available Seyed-Mohammad Fereshtehnejad,1,2 Mahdiyeh Shafieesabet,3 Arash Rahmani,4 Ahmad Delbari,1,5 Johan Lökk1,6 1Division of Clinical Geriatrics, Department of Neurobiology, Care Sciences, and Society (NVS, Karolinska Institutet, Stockholm, Sweden; 2Firoozgar Clinical Research Development Center (FCRDC, Firoozgar Hospital, 3Medical Student Research Committee (MSRC, Faculty of Medicine, 4Mental Health Research Center, Tehran Institute of Psychiatry, School of Behavioral Sciences and Mental Health, Iran University of Medical Sciences, Tehran, Iran; 5Iranian Research Center on Aging, University of Social Welfare and Rehabilitation, Tehran, Iran; 6Department of Geriatric Medicine, Karolinska University Hospital, Stockholm, Sweden Introduction: Parkinsonism occurs in all ethnic groups worldwide; however, there are wide variations in the prevalence rates reported from different countries, even for neighboring regions. The huge socioeconomic burden of parkinsonism necessitates the need for prevalence studies in each country. So far, there is neither data registry nor prevalence information on parkinsonism in the Iranian population. The aim of our study was to estimate the prevalence rate of probable parkinsonism in a huge urban area in Iran, Tehran using a community-based door-to-door survey.Materials and methods: We used a random multistage sampling of the households within the network of health centers consisting of 374 subunits in all 22 districts throughout the entire urban area of Tehran. Overall, 20,621 individuals answered the baseline checklist and screening questionnaire and data from 19,500 persons aged ≥30 years were entered in the final analysis. Health care professionals used a new six-item screening questionnaire for parkinsonism, which has been previously shown to have a high validity and diagnostic value in the same population.Results: A total of 157 cases were screened for parkinsonism using the validated six-item questionnaire. After

  15. Medium-to-high prevalence of screening-detected parkinsonism in the urban area of Tehran, Iran: data from a community-based door-to-door study.

    Science.gov (United States)

    Fereshtehnejad, Seyed-Mohammad; Shafieesabet, Mahdiyeh; Rahmani, Arash; Delbari, Ahmad; Lökk, Johan

    2015-01-01

    Parkinsonism occurs in all ethnic groups worldwide; however, there are wide variations in the prevalence rates reported from different countries, even for neighboring regions. The huge socioeconomic burden of parkinsonism necessitates the need for prevalence studies in each country. So far, there is neither data registry nor prevalence information on parkinsonism in the Iranian population. The aim of our study was to estimate the prevalence rate of probable parkinsonism in a huge urban area in Iran, Tehran using a community-based door-to-door survey. We used a random multistage sampling of the households within the network of health centers consisting of 374 subunits in all 22 districts throughout the entire urban area of Tehran. Overall, 20,621 individuals answered the baseline checklist and screening questionnaire and data from 19,500 persons aged ≥30 years were entered in the final analysis. Health care professionals used a new six-item screening questionnaire for parkinsonism, which has been previously shown to have a high validity and diagnostic value in the same population. A total of 157 cases were screened for parkinsonism using the validated six-item questionnaire. After age and sex adjustment based on the Tehran population, the prevalence of parkinsonism was calculated as 222.9 per 100,000. Using the World Health Organization's World Standard Population, the standardized prevalence rate of parkinsonism was 285 per 100,000 (95% confidence interval 240-329). The male:female ratio of probable parkinsonism was calculated as 1.62, and there was a significant increase in the screening rate by advancing age. The calculated rates for the prevalence of parkinsonism in our study are closer to reports from some European and Middle Eastern countries, higher than reports from Eastern Asian and African populations, and lower than Australia. The prevalence rate of >200 in 100,000 for parkinsonism in Tehran, Iran could be considered a medium-to-high rate.

  16. Opening Address

    Science.gov (United States)

    Crovini, L.

    1994-01-01

    Ladies and Gentlemen To quote Mr Jean Terrien: "Physics must be one step ahead of metrology". A long-serving Director of the BIPM, he said these words when visiting the IMGC in 1970 as a member of the scientific board of our Institute. At that time it was still an open question whether the IMGC should start research work on the absolute measurement of silicon lattice spacing. Mr Terrien underlined the revolutionary character of x-ray interferometry and, eventually, he caused the balance needle to lean towards the ... right direction. Mr Terrien correctly foresaw that, like Michelson's interferometer of 1880, x-ray interferometry could have a prominent place in today's science and technology. And while, in the first case, after more than a century we can see instruments based on electromagnetic wave interaction within every one's reach in laboratories and, sometimes, in workshops, in the second case, twenty-five years since the first development of an x-ray interferometer we can witness its role in nanometrology. Today and tomorrow we meet to discuss how to go beyond the sixth decimal place in the value of the Avogadro constant. We are aware that the quest for this achievement requires the cooperation of scientists with complementary capabilities. I am sure that the present workshop is a very good opportunity to present and discuss results and to improve and extend existing cooperation. The new adjustment of fundamental constants envisaged by the CODATA Task Group is redoubling scientists' efforts to produce competitive values of NA. The results of the measurements of the silicon lattice spacing in terms of an optical wavelength, which were available for the 1986 adjustment, combined with the determination of silicon molar volume, demonstrate how such an NA determination produces a consistent set of other constants and opens the way to a possible redefinition of the kilogram. We shall see in these two days how far we have progressed along this road. For us at the

  17. Sliding doors

    CERN Multimedia

    2008-01-01

    "Is the universe - correction: 'our' universe - no more than a speck of cosmic dust amid an infinite number of parallel worlds? A staple of mind-bending science fiction, the possibility of multiple universes has long intrigued hard-nosed physicists, mathematicians and cosmologists too."

  18. Open life science research, open software and the open century

    Directory of Open Access Journals (Sweden)

    Youhua Chen

    2015-05-01

    Full Text Available At the age of knowledge explosion and mass scientific information, I highlighted the importance of conducting open science in life and medical researches through the extensive usage of open software and documents. The proposal of conducting open science is to reduce the limited repeatability of researches in life science. I outlined the essential steps for conducting open life science and the necessary standards for creating, reusing and reproducing open materials. Different Creative Commons licenses were presented and compared of their usage scope and restriction. As a conclusion, I argued that open materials should be widely adopted in doing life and medical researches.

  19. From PAWP to "Pop": opening up new pathways to fatherhood.

    Science.gov (United States)

    Vadnais, Melissa L; Gerton, George L

    2015-01-01

    Infertility remains a significant problem for many couples. Approximately one in seven couples who attempt to conceive will fail to do so within 1 year. In about 65% of these cases, there is a male component of infertility.1 Despite normal semen parameters, the etiology of infertility remains uncertain in more than 50% of couples.2 Defects in sperm proteins and/ or structures may underlie certain cases of male infertility. Although many men would like to be called "Pop", "Dad", or "Papa", those who are classified with idiopathic male infertility have few options for becoming fathers. Recent studies by Aarabi et al.3 may open the door to new therapies.

  20. Structural Safety Analysis of Openable Working Table in ACP Hot Cell for Spent Fuel Treatment

    International Nuclear Information System (INIS)

    Kwon, Ki Chan; Ku, Jeong Hoe; Lee, Eun Pyo; Choung, Won Myung; You, Gil Sung; Lee, Won Kyung; Cho, IL Je; Kuk, Dong Hak

    2006-01-01

    A demonstration facility for advanced spent fuel conditioning process (ACP) is under construction in KAERI. In this hot cell facility, all process equipment and materials are taken in and out only through the rear door. The working table in front of the process rear door is specially designed to be openable for the efficient use of the space. This paper presents the structural safety analysis of the openable working table, for the normal operational load condition and accidental drop condition of heavy object. Both cases are investigated through static and dynamic finite element analyses. The analysis results show that structural safety of the working table is sufficiently assured and the working table is not collapsed even when an object of 500 kg is dropped from the height of 50 cm.

  1. Opening Address

    Science.gov (United States)

    Yamada, T.

    2014-12-01

    Ladies and Gentlemen, it is my great honor and pleasure to present an opening address of the 3rd International Workshop on "State of the Art in Nuclear Cluster Physics"(SOTANCP3). On the behalf of the organizing committee, I certainly welcome all your visits to KGU Kannai Media Center belonging to Kanto Gakuin University, and stay in Yokohama. In particular, to whom come from abroad more than 17 countries, I would appreciate your participations after long long trips from your homeland to Yokohama. The first international workshop on "State of the Art in Nuclear Cluster Physics", called SOTANCP, was held in Strasbourg, France, in 2008, and the second one was held in Brussels, Belgium, in 2010. Then the third workshop is now held in Yokohama. In this period, we had the traditional 10th cluster conference in Debrecen, Hungary, in 2012. Thus we have the traditional cluster conference and SOTANCP, one after another, every two years. This obviously shows our field of nuclear cluster physics is very active and flourishing. It is for the first time in about 10 years to hold the international workshop on nuclear cluster physics in Japan, because the last cluster conference held in Japan was in Nara in 2003, about 10 years ago. The president in Nara conference was Prof. K. Ikeda, and the chairpersons were Prof. H. Horiuchi and Prof. I. Tanihata. I think, quite a lot of persons in this room had participated at the Nara conference. Since then, about ten years passed. So, this workshop has profound significance for our Japanese colleagues. The subjects of this workshop are to discuss "the state of the art in nuclear cluster physics" and also discuss the prospect of this field. In a couple of years, we saw significant progresses of this field both in theory and in experiment, which have brought better and new understandings on the clustering aspects in stable and unstable nuclei. I think, the concept of clustering has been more important than ever. This is true also in the

  2. De versterkte stad Zaltbommel. 900 jaar beschermd door wallen en muren

    Directory of Open Access Journals (Sweden)

    Gabri van Tussenbroek

    2017-09-01

    jaren 2003 tot 2015 een groot restauratieproject van de middeleeuwse stadsmuur is uitgevoerd, waarbij het hele object wél is gedocumenteerd en waarbij de resultaten van het onderzoek hebben bijdragen aan de keuzes die tijdens de restauratie moesten worden gemaakt. En niet alleen dat, de gemeente heeft er bovendien voor gekozen de bevindingen die het onderzoek heeft opgeleverd door middel van een forse publicatie toegankelijk te maken voor het publiek, aangevuld met nader literatuur- en archiefonderzoek, om de geschiedenis van stadsmuren, vesting en wallen zo compleet mogelijk in kaart te brengen.

  3. The Great War and All That in A Hundred Doors by Michael Longley

    Directory of Open Access Journals (Sweden)

    Elisabeth Delattre

    2015-03-01

    Full Text Available The Great War has featured regularly in Michael Longley’s poetry, for personal, family, aesthetic and political reasons. His collection published in 2011 under the title A Hundred Doors contains a number of poems relating to his father and the so-called War Poets, in connection with others in which love and nature, life and death are also dominant themes. This article will show how, as elsewhere in his poetry, everything is interrelated, “the nature poetry”, in Longley’s words, “fertilizing the war poetry”.

  4. Dynamic simulation of road vehicle door window regulator mechanism of cross arm type

    Science.gov (United States)

    Miklos, I. Zs; Miklos, C.; Alic, C.

    2017-01-01

    The paper presents issues related to the dynamic simulation of a motor-drive operating mechanism of cross arm type, for the manipulation of road vehicle door windows, using Autodesk Inventor Professional software. The dynamic simulation of the mechanism involves a 3D modelling, kinematic coupling, drive motion parameters and external loads, as well as the graphically view of the kinematic and kinetostatic results for the various elements and kinematic couplings of the mechanism, under real operating conditions. Also, based on the results, the analysis of the mechanism components has been carried out using the finite element method.

  5. Open Standards, Open Source, and Open Innovation: Harnessing the Benefits of Openness

    Science.gov (United States)

    Committee for Economic Development, 2006

    2006-01-01

    Digitization of information and the Internet have profoundly expanded the capacity for openness. This report details the benefits of openness in three areas--open standards, open-source software, and open innovation--and examines the major issues in the debate over whether openness should be encouraged or not. The report explains each of these…

  6. Significant change in the construction of a door to a room with slowed down neutron field by means of commonly used inexpensive protective materials

    International Nuclear Information System (INIS)

    Konefal, Adam; Laciak, Marcin; Dawidowska, Anna; Osewski, Wojciech

    2014-01-01

    The detailed analysis of nuclear reactions occurring in materials of the door is presented for the typical construction of an entrance door to a room with a slowed down neutron field. The changes in the construction of the door were determined to reduce effectively the level of neutron and gamma radiation in the vicinity of the door in a room adjoining the neutron field room. Optimisation of the door construction was performed with the use of Monte Carlo calculations (GEANT4). The construction proposed in this paper bases on the commonly used inexpensive protective materials such as borax (13.4 cm), lead (4 cm) and stainless steel (0.1 and 0.5 cm on the side of the neutron field room and of the adjoining room, respectively). The improved construction of the door, worked out in the presented studies, can be an effective protection against neutrons with energies up to 1 MeV (authors)

  7. Photoionization of excited states, ions and open-shell atoms: innovative synchrotron experiments

    International Nuclear Information System (INIS)

    Manson, S.T.

    1981-01-01

    The development of synchrotron light sources with increased photon flux in the region 10 eV less than or equal to hν less than or equal to 1000 eV opens the door to many atomic physics investigations which have not been possible up to now. In this paper, three general types of experiments are discussed, each of which offers attractive possibilities for significant advances in our understanding

  8. Evaluation of the door-to-needle time in patients undergoing fibrinolytic therapy after acute myocardial infarction

    International Nuclear Information System (INIS)

    Jehangir, W.; Daood, M.S.; Khan, M.

    2009-01-01

    Early thrombolysis with fibrinolytic therapy has reduced mortality following acute myocardial infarction (AMI) with the major effect coming from early achievement of infarct-related artery potency. This study was carried out to determine the door-to-needle time in patients undergoing fibrinolytic therapy after acute myocardial infarction and to identify factors associated with a prolonged door-to-needle time. This was a cross sectional study in which patients who were thrombolysed for AMI with streptokinase at Punjab Institute of Cardiology, Lahore, from December 12, 2008 to February 18, 2009 were included. All patients admitted with AMI, who were candidates for fibrinolysis, were included. The time of infarction and time of arrival in hospital was determined with ECG changes and asking from patient and/or relatives. The reasons for delay of arrival were asked from patient and accompanying attendants where possible. A door-to-needle time of <30 min could be achieved in 110 of our 201 patients (54.72%). Mean door-to-needle time was 55.13 (+-71.04) minutes. A door-to-needle time of less than 30 minutes in 54.72% is comparable to most contemporary studies however there is a need to look into factors associated with delay. (author)

  9. Utilization of GSM Module (Sim 900 Based Arduino-Uno for Alarm System and Remote Automatic Door Locking

    Directory of Open Access Journals (Sweden)

    Fauzi Fauzi

    2018-01-01

    Full Text Available Sebuah sistem alarm dan pengunci pintu otomatis jarak jauh untuk keamanan rumah telah dibuat. Otomatisasi kunci pintu rumah ini beroperasi dengan menggunakan perintah yang dikirimkan oleh pemilik rumah melalui pesan singkat melalui handphone sehingga keamanan rumah akan tetap dapat dikendalikan meski dari jarak yang jauh. Penelitian ini bertujuan untuk membangun otomatisasi rumah pintar yang mampu melakukan dua hal yakni mengunci pintu dan menyalakan alarm dengan menggunakan mikrokontroler Arduino-uno dan modul GSM. Pengontrolan secara otomatis tersebut cukup kompleks dan memerlukan berbagai komponen yang terintegrasi dengan kemampuan pembacaan masukan, pemrosesan data dan pengontrolan keluaran secara bersamaan dan terprogram.  A remote door automatic alarm and door lock system for home security has been designed. This home door lock automation operates using commands sent by homeowners via short messages from handphone so that home security will remain controllable even from a long distance. This study aims to build smart home automation that can do two things: lock the door and turn on the alarm by using Arduino-uno microcontroller and GSM module. The automatic control is quite complex and requires a variety of integrated components with the ability to read input, data processing and control the output simultaneously and programmed.   Keywords: Arduino, GSM, Automatic Doors, SMS Rerefences Depari, G.S. (1985. Belajar Teori dan Keterampilan Elektronika. Bandung: Armico Daryanto, 2005. Pengetahuan Teknik Elektronika. Erlangga. Jakarta. Session, Kendall Webster, 2003. 1001 Rangkaian Elektronika. PT. Elek Media Komputindo Kelompok Gramedia, Jakarta. Sustrisno, 1986, Elektronika Teori dan penerapanya. Penerbit ITB, Bandung

  10. [Community mental health networks and doors at a Health and Community Center (CeSAC No 24) in the south of the Autonomous City of Buenos Aires (CABA)].

    Science.gov (United States)

    Corin, Marcela

    2013-01-01

    The history of the Health and Community Center (CeSAC) No 24 began 21 years ago in the Ramón Carrillo district, in Villa Soldati neighborhood. This is a marginal urban area in the south of the CABA with a population with urgent needs. The work started with a group of professionals dealing with primary care practices, and it continues up to the present. The goal of our community mental health project is the creation of spaces for prevention and well-being including art in all its expressions, with the active participation of neighbors in the coordination of many activities. Through the symbolic opening of doors and making networks visible, we opened the CeSAC to universities, scientific societies, foundations, NGOs, neighbor committees, neighborhood boards, human rights organizations, formal and informal education centers, cultural centers, churches, community radios, in order to show the vital movements of the community, as we -as a team- are an integral part of it. Our spaces, workshops and programs are a collective socio-historical construction that achieves milestones such as thinking, thinking of us, getting together and achieving the participation from the community and the continuous training for everybody working and living in Soldati. The decentralization and democratization trend, and the heterarchical management of our organization favors the possibility of catalyzing the wishes, motivations and efforts of the healthcare team, neighbors and network nodes, thus benefiting the creative work that turns a dream into a hopeful reality.

  11. Applications of the Discrete ordinates of Oak ridge System (DOORS) package to Nuclear Engineering problems

    Energy Technology Data Exchange (ETDEWEB)

    Azmy, Y.Y. [The Pennsylvania State University, 229 Reber Building, University Park, PA 16802 (United States)]. e-mail: yya3@psu.edu

    2004-07-01

    Particle transport problems are notorious for their difficulty. This fact requires that production level computer codes designed to address realistic engineering problems possess three important features: (i) high computational efficiency as measured by solution accuracy for a fixed computational cost; (ii) a wide variety of options to enhance robustness of the transport solver; and (iii) a broad collection of support codes that extend the reach of the transport solver to a wide variety of applications. The Discrete Ordinates of Oak Ridge System (DOORS) code package was designed with these features in mind. In this paper, capabilities of member codes in the DOORS package are overviewed with particular emphasis on two newly developed peripheral codes: BOT3P the mesh-generation and visualization code package, and GipGui the graphical user interface for the cross section manipulation code, GIP. Two large applications are used to illustrate the tight coupling between the peripheral codes and the DORT and TORT transport solvers in two and three dimensional geometries, respectively. These are: (i) criticality calculations for the C5G7MOX core benchmark; and (ii) dose distribution calculations for the Target Service Cell (TSC) of the Spallation Neutron Source (SNS). (Author)

  12. DOORS to the semantic web and grid with a PORTAL for biomedical computing.

    Science.gov (United States)

    Taswell, Carl

    2008-03-01

    The semantic web remains in the early stages of development. It has not yet achieved the goals envisioned by its founders as a pervasive web of distributed knowledge and intelligence. Success will be attained when a dynamic synergism can be created between people and a sufficient number of infrastructure systems and tools for the semantic web in analogy with those for the original web. The domain name system (DNS), web browsers, and the benefits of publishing web pages motivated many people to register domain names and publish web sites on the original web. An analogous resource label system, semantic search applications, and the benefits of collaborative semantic networks will motivate people to register resource labels and publish resource descriptions on the semantic web. The Domain Ontology Oriented Resource System (DOORS) and Problem Oriented Registry of Tags and Labels (PORTAL) are proposed as infrastructure systems for resource metadata within a paradigm that can serve as a bridge between the original web and the semantic web. The Internet Registry Information Service (IRIS) registers [corrected] domain names while DNS publishes domain addresses with mapping of names to addresses for the original web. Analogously, PORTAL registers resource labels and tags while DOORS publishes resource locations and descriptions with mapping of labels to locations for the semantic web. BioPORT is proposed as a prototype PORTAL registry specific for the problem domain of biomedical computing.

  13. Reducing door-to-needle times using Toyota's lean manufacturing principles and value stream analysis.

    Science.gov (United States)

    Ford, Andria L; Williams, Jennifer A; Spencer, Mary; McCammon, Craig; Khoury, Naim; Sampson, Tomoko R; Panagos, Peter; Lee, Jin-Moo

    2012-12-01

    Earlier tissue-type plasminogen activator (tPA) treatment for acute ischemic stroke increases efficacy, prompting national efforts to reduce door-to-needle times. We used lean process improvement methodology to develop a streamlined intravenous tPA protocol. In early 2011, a multidisciplinary team analyzed the steps required to treat patients with acute ischemic stroke with intravenous tPA using value stream analysis (VSA). We directly compared the tPA-treated patients in the "pre-VSA" epoch with the "post-VSA" epoch with regard to baseline characteristics, protocol metrics, and clinical outcomes. The VSA revealed several tPA protocol inefficiencies: routing of patients to room, then to CT, then back to the room; serial processing of workflow; and delays in waiting for laboratory results. On March 1, 2011, a new protocol incorporated changes to minimize delays: routing patients directly to head CT before the patient room, using parallel process workflow, and implementing point-of-care laboratories. In the pre and post-VSA epochs, 132 and 87 patients were treated with intravenous tPA, respectively. Compared with pre-VSA, door-to-needle times and percent of patients treated ≤60 minutes from hospital arrival were improved in the post-VSA epoch: 60 minutes versus 39 minutes (PLean process improvement methodology can expedite time-dependent stroke care without compromising safety.

  14. Solar Power Ramp Events Detection Using an Optimized Swinging Door Algorithm: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Cui, Mingjian; Zhang, Jie; Florita, Anthony; Hodge, Bri-Mathias; Ke, Deping; Sun, Yuanzhang

    2015-08-07

    Solar power ramp events (SPREs) are those that significantly influence the integration of solar power on non-clear days and threaten the reliable and economic operation of power systems. Accurately extracting solar power ramps becomes more important with increasing levels of solar power penetrations in power systems. In this paper, we develop an optimized swinging door algorithm (OpSDA) to detection. First, the swinging door algorithm (SDA) is utilized to segregate measured solar power generation into consecutive segments in a piecewise linear fashion. Then we use a dynamic programming approach to combine adjacent segments into significant ramps when the decision thresholds are met. In addition, the expected SPREs occurring in clear-sky solar power conditions are removed. Measured solar power data from Tucson Electric Power is used to assess the performance of the proposed methodology. OpSDA is compared to two other ramp detection methods: the SDA and the L1-Ramp Detect with Sliding Window (L1-SW) method. The statistical results show the validity and effectiveness of the proposed method. OpSDA can significantly improve the performance of the SDA, and it can perform as well as or better than L1-SW with substantially less computation time.

  15. Door and window image-based measurement using a mobile device

    Science.gov (United States)

    Ma, Guangyao; Janakaraj, Manishankar; Agam, Gady

    2015-03-01

    We present a system for door and window image-based measurement using an Android mobile device. In this system a user takes an image of a door or window that needs to be measured and using interaction measures specific dimensions of the object. The existing object is removed from the image and a 3D model of a replacement is rendered onto the image. The visualization provides a 3D model with which the user can interact. When tested on a mobile Android platform with an 8MP camera we obtain an average measurement error of roughly 0.5%. This error rate is stable across a range of view angles, distances from the object, and image resolutions. The main advantages of our mobile device application for image measurement include measuring objects for which physical access is not readily available, documenting in a precise manner the locations in the scene where the measurements were taken, and visualizing a new object with custom selections inside the original view.

  16. Finite element simulation of surface defects in the automobile door outer panel

    International Nuclear Information System (INIS)

    Fukumura, Masaru; Yamasaki, Yuji; Inage, Daisuke; Fujita, Takashi

    2004-01-01

    Recently, a sheet metal forming simulation has become an indispensable tool for developing a new model of an automobile part within a limited short period. In these days, the utilization of a springback calculation of the formed part has been increasing. However, only a few papers on the prediction of surface defects have been reported in spite of serious needs.In this paper, surface defects in the door outer panel, especially those around the door handle embossment, have been investigated. Applying an explicit solver to the forming simulation, and an implicit solver to the springback calculation, we have tried to evaluate surface defects in the panel. In order to improve the accuracy of the simulation, numerical tools have been modeled including the precise shape of the draw beads so that the draw bead effects on both the material flow and the restraint on the springback deformation have been considered. Compared with the actual panel shape, which shows apparent surface defects, the simulated result has closely predicted the above defects around the embossment.To demonstrate the applicability of our simulation, a few sensitivity analyses have been carried out, modifying forming conditions such as blank holder force. Each result has shown slight but distinctive differences in the cross section profile of the panel. As a result, it has been realized that the influence of each considered factor on surface defects is qualitatively consistent with our practical knowledge

  17. Radon concentrations in homes in an area of dolomite bedrock: Door County, Wisconsin

    International Nuclear Information System (INIS)

    Hawk, K.; Stieglitz, R.D.; Norman, J.C.

    1993-01-01

    A statewide survey by the Wisconsin Department of Health and Social Services with U.S.E.P.A. assistance reported an anomalously high percentage of homes in Door County with radon concentrations in excess of 20 pCi/L. The results were of interest because the county is underlain by marine sedimentary rocks rather than the igneous and metamorphic crystalline types usually associated with elevated radon concentrations. A voluntary population of 55 homes was tested for radon using activated charcoal canisters. This population was also asked to provide questionnaire response data on family, home, and socioeconomic aspects. The data were separated into socioeconomic, energy efficiency, radon access, and karst level categories and statistically analyzed. A subpopulation was selected from the larger population for detailed site investigation, which included additional in-home air testing and, at some sites, water supply analysis and in-ground testing for radon. The field investigations collected information on the geology, soil, topography, and home construction and use. The results of the investigation verified and characterized the radon occurrences in Door County. The presence or absence of karst features is shown to be statistically significant to radon levels. 23 refs., 5 figs., 3 tabs

  18. The Relationship with Self Esteem Between Self Monitoring Levels of Sub Elite In - Door Soccer Players

    Directory of Open Access Journals (Sweden)

    Mehmet Behzat T U R A N

    2015-07-01

    Full Text Available The aim of this study was to investigate the relationship with self - esteem between self monitoring levels of sub - elite in - door soccer players. For this aim, 86 male and 91 female athletes at the ages of 18 – 28 years were participated in this study voluntarily. The participants were studying at 7 different universities that join ed the in - door soccer championship of Turkish University Sport Federati on. The Socio - demographic data form, Self - monitoring Scale , and Coopersmith Self - Esteem Inventory were performed by the participants. The d ata was analyzed by using IBM SPSS (version 20.0. The Spearman Correlation parameter calculated in order to comment the relationship with data, Multiple regret ion analysis were performed for the predictive power of self - esteem for self monitoring levels of the participants. According to the analysis, a negative relationship was found among self - esteem, self - monitoring total score , and extraversion levels . A nd it was found that self - esteem levels predictived self monitoring levels substantially. It was found that the s elf - monitoring and extraversion affected self - esteem negatively, it was thought that highly self - esteem ed athletes have a tendency to see themselves as superior than the other athletes, ignore the extraneous criticism. No matter what self - esteem levels is that extraversion and acting altitute (attitude ? has not change. Consequently, self - esteem has revers e relationship with self - monitoring properties since trainers and teachers both is raised self - esteem and is helped self - monitoring themselves.

  19. Applications of the Discrete ordinates of Oak ridge System (DOORS) package to Nuclear Engineering problems

    International Nuclear Information System (INIS)

    Azmy, Y.Y.

    2004-01-01

    Particle transport problems are notorious for their difficulty. This fact requires that production level computer codes designed to address realistic engineering problems possess three important features: (i) high computational efficiency as measured by solution accuracy for a fixed computational cost; (ii) a wide variety of options to enhance robustness of the transport solver; and (iii) a broad collection of support codes that extend the reach of the transport solver to a wide variety of applications. The Discrete Ordinates of Oak Ridge System (DOORS) code package was designed with these features in mind. In this paper, capabilities of member codes in the DOORS package are overviewed with particular emphasis on two newly developed peripheral codes: BOT3P the mesh-generation and visualization code package, and GipGui the graphical user interface for the cross section manipulation code, GIP. Two large applications are used to illustrate the tight coupling between the peripheral codes and the DORT and TORT transport solvers in two and three dimensional geometries, respectively. These are: (i) criticality calculations for the C5G7MOX core benchmark; and (ii) dose distribution calculations for the Target Service Cell (TSC) of the Spallation Neutron Source (SNS). (Author)

  20. Behaviour and design considerations for continuous flow closed-open-closed liquid microchannels.

    Science.gov (United States)

    Melin, Jessica; van der Wijngaart, Wouter; Stemme, Göran

    2005-06-01

    This paper introduces a method of combining open and closed microchannels in a single component in a novel way which couples the benefits of both open and closed microfluidic systems and introduces interesting on-chip microfluidic behaviour. Fluid behaviour in such a component, based on continuous pressure driven flow and surface tension, is discussed in terms of cross sectional flow behaviour, robustness, flow-pressure performance, and its application to microfluidic interfacing. The closed-open-closed microchannel possesses the versatility of upstream and downstream closed microfluidics along with open fluidic direct access. The device has the advantage of eliminating gas bubbles present upstream when these enter the open channel section. The unique behaviour of this device opens the door to applications including direct liquid sample interfacing without the need for additional and bulky sample tubing.

  1. Open Source, Openness, and Higher Education

    Science.gov (United States)

    Wiley, David

    2006-01-01

    In this article David Wiley provides an overview of how the general expansion of open source software has affected the world of education in particular. In doing so, Wiley not only addresses the development of open source software applications for teachers and administrators, he also discusses how the fundamental philosophy of the open source…

  2. From Open Source to Open Collaboration

    CERN Multimedia

    CERN. Geneva

    2015-01-01

    Open source is the right to modify, not the right to contribute. Are external contributions absent from your project? Have you ever thought about what is it like to be a new contributor on your project? I challenge you to transform your project from Open Source to an Open Collaboration.

  3. Open access, open education resources and open data in Uganda.

    Science.gov (United States)

    Salvo, Ivana Di; Mwoka, Meggie; Kwaga, Teddy; Rukundo, Priscilla Aceng; Ernest, Dennis Ssesanga; Osaheni, Louis Aikoriogie; John, Kasibante; Shafik, Kasirye; de Sousa, Agostinho Moreira

    2015-01-01

    As a follow up to OpenCon 2014, International Federation of Medical Students' Associations (IFMSA) students organized a 3 day workshop Open Access, Open Education Resources and Open Data in Kampala from 15-18 December 2014. One of the aims of the workshop was to engage the Open Access movement in Uganda which encompasses the scientific community, librarians, academia, researchers and students. The IFMSA students held the workshop with the support of: Consortium for Uganda University Libraries (CUUL), The Right to Research Coalition, Electronic Information for Libraries (EIFL), Makerere University, International Health Sciences University (IHSU), Pan African Medical Journal (PAMJ) and the Centre for Health Human Rights and Development (CEHURD). All these organizations are based or have offices in Kampala. The event culminated in a meeting with the Science and Technology Committee of Parliament of Uganda in order to receive the support of the Ugandan Members of Parliament and to make a concrete change for Open Access in the country.

  4. CT and MRI-based door-needle-times for acute stroke patients a quasi-randomized clinical trial

    DEFF Research Database (Denmark)

    Hansen, Christine Krarup; Christensen, Anders; Rodgers, Helen

    2017-01-01

    OBJECTIVES: Door-Needle-times (DNT) of 20min are feasible when Computer Tomography (CT) is used for first-line brain-imaging to assess stroke-patients' eligibility for intravenous-tissue-Plasminogen-Activator (iv-tPA), but the more time-consuming Magnetic Resonance Imaging (MRI)-based-evaluation ......OBJECTIVES: Door-Needle-times (DNT) of 20min are feasible when Computer Tomography (CT) is used for first-line brain-imaging to assess stroke-patients' eligibility for intravenous-tissue-Plasminogen-Activator (iv-tPA), but the more time-consuming Magnetic Resonance Imaging (MRI...

  5. Study of variation of materials patients room's door related of neutron flux iradiation

    Science.gov (United States)

    Nirmalasari, Yuliana Dian; Suparmi, A.; Sardjono, Y.

    2017-08-01

    The treatment chamber of patients has been simulating with MCNPX Code. Optimation of simulation design of Irradiation chamber is corresponding to ISO standards for 30 MeV cyclotron generator. The simulation has used the variation of door's materials that was applied at treatment room's door. The variation of materials was Stainless Steel 202 and Pb, the thickness Pb and stainless steel 202 with the thickness were 2 cm, respectively. Neutron flux that was radiated to stainless steel 202 in the sequence was 3.34195 × 105 n . Cm-2 s-1 and 8.41568 × 104 n . Cm-2 s-1, while for Pb was 4.01349 × 105 n . Cm-2 s-1 and 2.58058 × 104 n . Cm-2 s-1. The further, neutron flux that was radiated to Pb and stainless steel 202 with the thickness were 4 cm in sequence was 4.00601 × 105 n . Cm-2 s-1 and 1.71713 × 104 n . Cm-2 s-1 for Pb, while for SS 202 was 3.09925 × 105 n . Cm-2 s-1. From this ratio we concluded that material Pb absorbed higher neutron flux than material Stainless Steel 202. On the other hand, the cost of Pb was more expensive than Stainless Steel 202. In addition, the material Stainless Steel 202 was obtaine more easily than the material Pb. There fore to overcome the economics problem, can try to build the door with stainless still 202 sheet and Pb sheet together. The further, the neutron dose with 2 cm of thickness was 7.69603 × 10-2 Gy and 2.10623 × 10-2 Gy for SS 202, while for Pb was 4.19444 × 10-2 Gy and 1.50581 × 10-2 Gy. While the neutron dose with 4 cm of thickness for SS 202 was 9.39602 × 10-2 Gy and for Pb was 4.46541 × 10-2 Gy and 1.50502 × 10-2 Gy. We recommend that this simulation should be further optimized.

  6. Open lung biopsy

    Science.gov (United States)

    Biopsy - open lung ... An open lung biopsy is done in the hospital using general anesthesia . This means you will be asleep and ... The open lung biopsy is done to evaluate lung problems seen on x-ray or CT scan .

  7. 49 CFR 1242.74 - Adjusting and transferring loads, and car loading devices and grain doors (accounts XX-33-71 and...

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 9 2010-10-01 2010-10-01 false Adjusting and transferring loads, and car loading devices and grain doors (accounts XX-33-71 and XX-33-72). 1242.74 Section 1242.74 Transportation Other... loads, and car loading devices and grain doors (accounts XX-33-71 and XX-33-72). These accounts pertain...

  8. Optimized Swinging Door Algorithm for Wind Power Ramp Event Detection: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Cui, Mingjian; Zhang, Jie; Florita, Anthony R.; Hodge, Bri-Mathias; Ke, Deping; Sun, Yuanzhang

    2015-08-06

    Significant wind power ramp events (WPREs) are those that influence the integration of wind power, and they are a concern to the continued reliable operation of the power grid. As wind power penetration has increased in recent years, so has the importance of wind power ramps. In this paper, an optimized swinging door algorithm (SDA) is developed to improve ramp detection performance. Wind power time series data are segmented by the original SDA, and then all significant ramps are detected and merged through a dynamic programming algorithm. An application of the optimized SDA is provided to ascertain the optimal parameter of the original SDA. Measured wind power data from the Electric Reliability Council of Texas (ERCOT) are used to evaluate the proposed optimized SDA.

  9. Numerical Modelling and Damage Assessment of Rotary Wing Aircraft Cabin Door Using Continuum Damage Mechanics Model

    Science.gov (United States)

    Boyina, Gangadhara Rao T.; Rayavarapu, Vijaya Kumar; V. V., Subba Rao

    2017-02-01

    The prediction of ultimate strength remains the main challenge in the simulation of the mechanical response of composite structures. This paper examines continuum damage model to predict the strength and size effects for deformation and failure response of polymer composite laminates when subjected to complex state of stress. The paper also considers how the overall results of the exercise can be applied in design applications. The continuum damage model is described and the resulting prediction of size effects are compared against the standard benchmark solutions. The stress analysis for strength prediction of rotary wing aircraft cabin door is carried out. The goal of this study is to extend the proposed continuum damage model such that it can be accurately predict the failure around stress concentration regions. The finite element-based continuum damage mechanics model can be applied to the structures and components of arbitrary configurations where analytical solutions could not be developed.

  10. Spam nation the inside story of organized cybercrime-from global epidemic to your front door

    CERN Document Server

    Krebs, Brian

    2014-01-01

    In Spam Nation, investigative journalist and cybersecurity expert Brian Krebs unmasks the criminal masterminds driving some of the biggest spam and hacker operations targeting Americans and their bank accounts. Tracing the rise, fall, and alarming resurrection of the digital mafia behind the two largest spam pharmacies-and countless viruses, phishing, and spyware attacks-he delivers the first definitive narrative of the global spam problem and its threat to consumers everywhere. Blending cutting-edge research, investigative reporting, and firsthand interviews, this terrifying true story reveals how we unwittingly invite these digital thieves into our lives every day. From unassuming computer programmers right next door to digital mobsters like "Cosma"-who unleashed a massive malware attack that has stolen thousands of Americans' logins and passwords-Krebs uncovers the shocking lengths to which these people will go to profit from our data and our wallets. Not only are hundreds of thousands of Americans expos...

  11. Leakage rate from LOCA-aged inflatable airlock seals Pickering NGS 'B' personnel doors

    International Nuclear Information System (INIS)

    Fayle, G.W.; Cordingley, D.C.

    1985-01-01

    In order to demonstrate to the Atomic Energy Control Board that an air-lock inflatable seal will function after a LOCA exposure, an inflatable seal intended for personnel doors at the Pickering NGS 'B' was exposed to the thermal/moisture conditions of the LOCA requirement. While attending to determine the post-LOCA leakage rate it was found that additional leaks developed during each post-LOCA inflation/deflation cycle. The seal had been significantly and irreparably deteriorated by the LOCA exposure. The test has demonstrated that this type of LOCA exposed seal should not be expected to withstand either additional pressure above 207 kPa or additional inflation/deflation cycling. A higher inflation pressure and/or cycling will reduce the likelihood of a post-LOCA seal retaining an inflation pressure sufficient to prevent leakage across the seal

  12. How open innovation can help you cope in lean times.

    Science.gov (United States)

    Chesbrough, Henry W; Garman, Andrew R

    2009-12-01

    A recession often forces you to cut R&D as you refocus on your core. But innovation need not go by the wayside. By placing certain assets and projects outside your walls, you can actually preserve opportunities for future growth while you shore up the fortress. Chesbrough, of Haas School of Business, and Garman, of New Venture Partners, identify five strategic moves that open the door to innovation by, ironically, letting it out of the house. Some inside-out moves permit outside firms to invest in and develop your projects; others call for spinning off projects as separate ventures that still allow you to retain some equity. Whatever the specific approach, you can meet the inherent cultural and organizational challenges of inside-out open innovation by approaching it holistically and placing it under the leadership of senior executives in strategic roles.

  13. The effectiveness of platform screen doors for the prevention of subway suicides in South Korea.

    Science.gov (United States)

    Chung, Yong Woon; Kang, Sung Jin; Matsubayashi, Tetsuya; Sawada, Yasuyuki; Ueda, Michiko

    2016-04-01

    Subway suicide can significantly impact the general public. Platform Screen Doors (PSDs) are considered to be an effective strategy to prevent suicides at subway stations, but the evidence on their effectiveness is limited. We assessed the effectiveness of installing half- and full-height platform screen doors in reducing subway suicides using Poisson regression analysis. Ten-year monthly panel data for 121 subway stations between 2003 and 2012 in the Seoul metropolitan area were used for the analysis. We found that installing PSDs decreases fatal suicide cases by 89% (95% CI: 57-97%). We also found that the installation of full-height PSDs resulted in the elimination of subway suicides by completely blocking access to the track area; however, half-height PSDs, which do not extend to the ceiling of the platform, were not as effective as full-height ones. Our findings were based on the data from a single subway operator for a limited period of time. Accordingly, we did not consider the possibility that some passengers choose to die at a station run by other operators. Our study did not examine the potential substitution effects of other suicide methods. Installing physical barriers at subway stations can be an effective strategy to reduce the number of subway suicides; however, half-height PSDs are not as effective as full-height ones, even when they are as high as the height of an adult. Thus, these barriers should be made high enough so that nobody can climb over them. Copyright © 2016 Elsevier B.V. All rights reserved.

  14. CAPS OpenACC Compilers: Performance and Portability

    CERN Multimedia

    CERN. Geneva

    2013-01-01

    The announcement late 2011 of the new OpenACC directive-based programming standard supported by CAPS, CRAY and PGI compilers has open up the door to more scientific applications that can be ported on many-core systems. Following a porting methodology, this talk will first review the principles of programming with OpenACC and then the advanced features available in the CAPS compilers to further optimize OpenACC applications: library integration, tuning directives with auto-tune mechanisms to build applications adaptive to different GPUs. CAPS compilers use hardware vendors' backends such as NVIDIA CUDA and OpenCL making them the only OpenACC compilers supporting various many-core architectures. About the speaker Stéphane Bihan is co-funder and currently Director of Sales and Marketing at CAPS enterprise. He has held several R&D positions in companies such as ARC international plc in London, Canon Research Center France, ACE compiler experts in Amsterdam and the INRIA r...

  15. Maatschappelijk belang van fietspad 10; fietverbinding door een Habitatrichtlijngebied, tussen de Haagse agglomeratie en de Vallei Meijendel via de Waasdorpervlakte

    NARCIS (Netherlands)

    Goossen, C.M.; Regt, de W.J.; Langers, F.

    2004-01-01

    Provincie Zuid-Holland wil fietspad 10 aanleggen van de rand van de Haagse agglomeratie door de vlakte van Waalsdorp (een Habitatrichtlijngebied) naar de vallei Meijendel. Het maatschappelijk belang van dit fietspad moet worden aangetoond. De Haagse regio heeft een fors fietstekort. De kwaliteit van

  16. Door and cabinet recognition using convolutional neural nets and real-time method fusion for handle detection and grasping

    DEFF Research Database (Denmark)

    Maurin, Adrian Llopart; Ravn, Ole; Andersen, Nils Axel

    2017-01-01

    In this paper we present a new method that robustly identifies doors, cabinets and their respective handles, with special emphasis on extracting useful features from handles to be then manipulated. The novelty of this system relies on the combination of a Convolutional Neural Net (CNN), as a form...

  17. Dual door entry to exciplex emission in a chimeric DNA duplex containing non-nucleoside-nucleoside pair.

    Science.gov (United States)

    Bag, Subhendu Sekhar; Talukdar, Sangita; Kundu, Rajen; Saito, Isao; Jana, Subhashis

    2014-01-25

    Dual door entry to exciplex formation was established in a chimeric DNA duplex wherein a fluorescent non-nucleosidic base surrogate () is paired against a fluorescent nucleosidic base surrogate (). Packing of the nucleobases via intercalative stacking interactions led to an exciplex emission either via FRET from the donor or direct excitation of the FRET acceptor .

  18. Predatory Publishing: How to Safely Navigate the Waters of Open Access.

    Science.gov (United States)

    Power, Helen

    2018-03-01

    Open access publishing enables scholarship to be openly accessible to everyone, which has countless benefits. However, the open access movement has opened the door for "predatory publishers" to take advantage of researchers surviving in this publish or perish academic landscape. Predatory journals are becoming increasingly common. Nursing researchers, instructors, and students need to be made aware of the dangers of predatory journals, and they need to know how to identify them. While there are blacklists and whitelists that can be used to aid in decision-making, it is critical to note that these lists can never be entirely up to date. This article incorporates a literature review which provides insights into newer trends in predatory and unethical publishing, including "journal hijacking" and "bogus impact factors". Extensive criteria for assessing emerging or unknown journals is compiled to aid researchers, students, educators, and the public in evaluating open access publications.

  19. Family Open House

    Science.gov (United States)

    Search Family Open House Join us for an afternoon of science fun. The Fermilab Family Open House is a party for children of all ages to learn about the world of physics. The Open House is supported by Open House? Check out our YouTube video to learn more! Explore physics concepts with hands-on

  20. Glaucoma, Open-Angle

    Science.gov (United States)

    ... Home » Statistics and Data » Glaucoma, Open-angle Listen Glaucoma, Open-angle Open-angle Glaucoma Defined In open-angle glaucoma, the fluid passes ... 2010 2010 U.S. Age-Specific Prevalence Rates for Glaucoma by Age and Race/Ethnicity The prevalence of ...

  1. JISC Open Access Briefing Paper

    OpenAIRE

    Swan, Alma

    2005-01-01

    What Open Access is. What Open Access is not. How is Open Access provided? Open Access archives or repositories. Open Access journals. Why should authors provide Open Access to their work? Further information and resources

  2. OpenGL Insights

    CERN Document Server

    Cozzi, Patrick

    2012-01-01

    Get Real-World Insight from Experienced Professionals in the OpenGL Community With OpenGL, OpenGL ES, and WebGL, real-time rendering is becoming available everywhere, from AAA games to mobile phones to web pages. Assembling contributions from experienced developers, vendors, researchers, and educators, OpenGL Insights presents real-world techniques for intermediate and advanced OpenGL, OpenGL ES, and WebGL developers. Go Beyond the Basics The book thoroughly covers a range of topics, including OpenGL 4.2 and recent extensions. It explains how to optimize for mobile devices, explores the design

  3. Open Government and (Linked (Open (Government (Data

    Directory of Open Access Journals (Sweden)

    Christian Philipp Geiger

    2012-12-01

    Full Text Available This article explores the opening and the free usage of stored public sector data, supplied by state. In the age of Open Government and Open Data it’s not enough just to put data online. It should be rather weighed out whether, how and which supplied public sector data can be published. Open Data are defined as stored data which could be made accessible in a public interest without any restrictions for usage and distribution. These Open Data can possibly be statistics, geo data, maps, plans, environmental data and weather data in addition to materials of the parliaments, ministries and authorities. The preparation and the free access to existing data permit varied approaches to the reuse of data, discussed in the article. In addition, impulses can be given for Open Government – the opening of state and administration, to more transparency, participation and collaboration as well as to innovation and business development. The Open Data movement tries to get to the bottom of current publication processes in the public sector which could be formed even more friendly to citizens and enterprises.

  4. Overview: Routes to Open Access

    OpenAIRE

    Tullney, Marco; van Wezenbeek, Wilma

    2017-01-01

    Slides of an overview presentation given at a CESAER workshop on Open Access, February 2nd, 2017, in Brussels Cover major routes to more open access as discussed in the Task Force Open Science of CESAER: (national) open access strategies open access mandates open access incentives open access awareness open access publishing open access infrastructure

  5. Prevention: Exercise

    Medline Plus

    Full Text Available ... Supplements Surgical Options Anterior Cervical Fusion Artifical Disc Replacement (ADR) Bone Graft Alternatives Bone Morphogenetic Proteins (BMP) Cervical Disc Replacement Cervical Laminoplasty Lumbar (Open) Microscopic Discectomy Percutaneous Vertebral ...

  6. Prevention: Exercise

    Medline Plus

    Full Text Available ... Disc Replacement (ADR) Bone Graft Alternatives Bone Morphogenetic Proteins (BMP) Cervical Disc Replacement Cervical Laminoplasty Lumbar (Open) ... Flexibility Aerobic Exercise Cervical Exercise Strength Training for the Elderly Other Back Pack Safety Pregnancy and Back ...

  7. Technology collaboration by means of an open source government

    Science.gov (United States)

    Berardi, Steven M.

    2009-05-01

    The idea of open source software originally began in the early 1980s, but it never gained widespread support until recently, largely due to the explosive growth of the Internet. Only the Internet has made this kind of concept possible, bringing together millions of software developers from around the world to pool their knowledge. The tremendous success of open source software has prompted many corporations to adopt the culture of open source and thus share information they previously held secret. The government, and specifically the Department of Defense (DoD), could also benefit from adopting an open source culture. In acquiring satellite systems, the DoD often builds walls between program offices, but installing doors between programs can promote collaboration and information sharing. This paper addresses the challenges and consequences of adopting an open source culture to facilitate technology collaboration for DoD space acquisitions. DISCLAIMER: The views presented here are the views of the author, and do not represent the views of the United States Government, United States Air Force, or the Missile Defense Agency.

  8. Effects of opening in shear walls of 30- storey building

    Directory of Open Access Journals (Sweden)

    Ruchi Sharma

    2015-03-01

    Full Text Available Tall towers and multi-storey buildings have fascinated mankind from the beginning of civilization, their construction being initially for defense and subsequently for ecclesiastical purposes. These tall buildings because of its height, is affected by lateral forces due to wind or earthquake actions tends to snap the building in shear and push it over in bending. In general, the rigidity (i.e. Resistance to lateral deflection and stability (i.e. Resistance to overturning moments requirement become more important. Shear walls (Structural walls contribute significant lateral stiffness, strength, and overall ductility and energy dissipation capacity. In many structural walls a regular pattern of openings has to be provided due to various functional requirements such as to accommodate doors, windows and service ducts. Such type of openings reduces the stiffness of the shear wall to some extent depending on the shape and size of the opening. In the present parametric study, efforts are made to investigate and critically assess the effects of various size of openings in shear walls on the responses and behaviors of multi-storey buildings. The 30 storey Prototype buildings with different types of openings in shear wall with and without incorporating the volume of shear wall reduced in the boundary elements are analyzed using software E-TABS using Response spectrum method (1893(Part-1-2002 and Time history method.

  9. The effect of a paraffin screen on the neutron dose at the maze door of a 15 MV linear accelerator.

    Science.gov (United States)

    Krmar, M; Nikolić, D; Kuzmanović, A; Kuzmanović, Z; Ganezer, K

    2013-08-01

    The purpose of this study was to explore the effects of a paraffin screen located at various positions in the maze on the neutron dose equivalent at the maze door. The neutron dose equivalent was measured at the maze door of a room containing a 15 MV linear accelerator for x-ray therapy. Measurements were performed for several positions of the paraffin screen covering only 27.5% of the cross-sectional area of the maze. The neutron dose equivalent was also measured at all screen positions. Two simple models of the neutron source were considered in which the first assumed that the source was the cross-sectional area at the inner entrance of the maze, radiating neutrons in an isotropic manner. In the second model the reduction in the neutron dose equivalent at the maze door due to the paraffin screen was considered to be a function of the mean values of the neutron fluence and energy at the screen. The results of this study indicate that the equivalent dose at the maze door was reduced by a factor of 3 through the use of a paraffin screen that was placed inside the maze. It was also determined that the contributions to the dosage from areas that were not covered by the paraffin screen as viewed from the dosimeter, were 2.5 times higher than the contributions from the covered areas. This study also concluded that the contributions of the maze walls, ceiling, and floor to the total neutron dose equivalent were an order of magnitude lower than those from the surface at the far end of the maze. This study demonstrated that a paraffin screen could be used to reduce the neutron dose equivalent at the maze door by a factor of 3. This paper also found that the reduction of the neutron dose equivalent was a linear function of the area covered by the maze screen and that the decrease in the dose at the maze door could be modeled as an exponential function of the product φ·E at the screen.

  10. Open heart surgery

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/article/002950.htm Open heart surgery To use the sharing features on this ... large arteries connected to the heart. The term "open heart surgery" means that you are connected to a ...

  11. OpenCities Project

    Data.gov (United States)

    US Agency for International Development — The Open Cities Project aims to catalyze the creation, management and use of open data to produce innovative solutions for urban planning and resilience challenges...

  12. Aortic valve surgery - open

    Science.gov (United States)

    ... gov/ency/article/007408.htm Aortic valve surgery - open To use the sharing features on this page, ... separates the heart and aorta. The aortic valve opens so blood can flow out. It then closes ...

  13. Open Payments Data

    Data.gov (United States)

    U.S. Department of Health & Human Services — Open Payments (otherwise known as the Sunshine Act) - Open Payments is a Congressionally-mandated transparency program that increases awareness of financial...

  14. Information on Open Access

    African Journals Online (AJOL)

    Open Access (OA), defined most simply, means free full text online. There are over 130 Open Access journals hosted on the AJOL website. You can find a full list of these journals here: OA journals on AJOL ...

  15. Dimensions of Openness

    DEFF Research Database (Denmark)

    Dalsgaard, Christian; Thestrup, Klaus

    2015-01-01

    The objective of the paper is to present a pedagogical approach to openness. The paper develops a framework for understanding the pedagogical opportunities of openness in education. Based on the pragmatism of John Dewey and sociocultural learning theory, the paper defines openness in education...... as a matter of engaging educational activities in sociocultural practices of a surrounding society. Openness is not only a matter of opening up the existing, but of developing new educational practices that interact with society. The paper outlines three pedagogical dimensions of openness: transparency...... practices. Openness as joint engagement in the world aims at establishing interdependent collaborative relationships between educational institutions and external practices. To achieve these dimensions of openness, educational activities need to change and move beyond the course as the main format...

  16. Open Hardware Business Models

    Directory of Open Access Journals (Sweden)

    Edy Ferreira

    2008-04-01

    Full Text Available In the September issue of the Open Source Business Resource, Patrick McNamara, president of the Open Hardware Foundation, gave a comprehensive introduction to the concept of open hardware, including some insights about the potential benefits for both companies and users. In this article, we present the topic from a different perspective, providing a classification of market offers from companies that are making money with open hardware.

  17. Open Hardware Business Models

    OpenAIRE

    Edy Ferreira

    2008-01-01

    In the September issue of the Open Source Business Resource, Patrick McNamara, president of the Open Hardware Foundation, gave a comprehensive introduction to the concept of open hardware, including some insights about the potential benefits for both companies and users. In this article, we present the topic from a different perspective, providing a classification of market offers from companies that are making money with open hardware.

  18. Open Science Training Handbook

    OpenAIRE

    Sonja Bezjak; April Clyburne-Sherin; Philipp Conzett; Pedro Fernandes; Edit Görögh; Kerstin Helbig; Bianca Kramer; Ignasi Labastida; Kyle Niemeyer; Fotis Psomopoulos; Tony Ross-Hellauer; René Schneider; Jon Tennant; Ellen Verbakel; Helene Brinken

    2018-01-01

    For a readable version of the book, please visit https://book.fosteropenscience.eu A group of fourteen authors came together in February 2018 at the TIB (German National Library of Science and Technology) in Hannover to create an open, living handbook on Open Science training. High-quality trainings are fundamental when aiming at a cultural change towards the implementation of Open Science principles. Teaching resources provide great support for Open Science instructors and trainers. The ...

  19. Sliding Doors: should treatment of gender identity disorder and other body modifications be privately funded?

    Science.gov (United States)

    Giordano, Simona

    2012-02-01

    Gender Identity Disorder (GID) is regarded as a mental illness and included in the Diagnostic and Statistical Manual of Mental Disorders (DSM-IV). It will also appear in the DSM-V, due to be published in 2013. The classification of GID as a mental illness is contentious. But what would happen to sufferers if it were removed from the diagnostic manuals? Would people lose their entitlement to funded medical care, or to reimbursement under insurance schemes? On what basis should medical treatment for GID be provided? What are the moral arguments for and against funded or reimbursed medical care for GID? This paper starts out with a fiction: GID is removed from the diagnostic manuals. Then the paper splits in two, as in happened in the Howitt's 1998 film Sliding Doors. The two scenarios run parallel. In one, it is argued that GID is on a par with other body modifications, such as cosmetic and racial surgery, and that, for ethical reasons, treatment for GID should be privately negotiated by applicants and professionals and privately paid for. In the other scenario, it is argued that the comparison between GID and other body modifications is misleading. Whether or not medical treatment should be funded or reimbursed is independent of whether GID is on a par with other forms of body dissatisfaction.

  20. Environmental, economic and social analysis of materials for doors and windows in Sri Lanka

    Energy Technology Data Exchange (ETDEWEB)

    Abeysundra, U.G. Yasantha; Babel, Sandhya; Sharp, Alice [Environmental Technology Program, Sirindhorn International Institute of Technology (SIIT), Thammasat University, P.O. Box 22, Pathumthani 12121 (Thailand); Gheewala, Shabbir [The Joint Graduate School of Energy and Environment, King Mongkut' s University of Technology, School of Energy and Materials Building, Bangkok 10140 (Thailand)

    2007-05-15

    This paper compares the environmental, economic and social impacts of two types of doors and windows (elements), namely timber and aluminum taking into consideration the life cycle perspective. These elements are widely used for the buildings in Sri Lanka. Thus, it will help in the decision-making process when selecting materials for these elements. Major materials used for these elements are timber, brass, glass, paint, aluminum, rubber, steel and PVC boards. Environmental burdens associated with these materials are analyzed in terms of embodied energy, and environmental impacts that are relevant to Sri Lanka, such as global warming (GWP), acidification (ACP) and nutrient enrichment (NEP). Economic analysis is done using market prices of materials and affordability for those materials. Social concerns such as thermal comfort, good interior (aesthetics), ability to construct fast, and durability are analyzed based on the data collected through the questionnaires and also, interviews with the stakeholders of the buildings such as engineers, architects, building contractors and building users. It was found that timber elements are superior to aluminum elements in environmental scores (GWP, ACP and NEP). On economic score, also, timber elements are better. But on social score, aluminum elements are better than timber. It was also found that the higher the recycling percentage of aluminum, the higher the environmental favorability of the aluminum. (author)

  1. THE OTHER SIDE OF THE REVOLVING DOOR: COMMUNITY SUPPORT AND MENTAL HEALTH

    Directory of Open Access Journals (Sweden)

    Luísa Horn de Castro Silveira

    2016-09-01

    Full Text Available The Psychiatric Reform has, as a fundamental principle, the treatment carried out outside the hospital, considering that the hospitalization should be an option only when the extra-hospital resources are not effective enough. However, multiple psychiatric readmissions are still frequent. The present study focuses on what happens outside of the hospital doors, analyzing elements of the community life of people who suffer from mental disorders,questioning if those experiences are related to the frequent necessity of hospitalization. Therefore, the perception of community support was investigated in patients with a high number of readmissions, in comparison with patients in their first hospitalization, in a general hospital in Porto Alegre (Brazil. The results showed that the community is a powerful source of help in crisis situations; nevertheless, the readmitted patients have weaker social bonds and a longer distance from the Atenção Básica (Primary Care, in comparison with the other group. For that reason, the family becomes the main source of support, what leads to an overburden for the relatives, and the hospital acquires a special status for these people, who see the hospital as the only alternative in a situation of crisis.

  2. Generalized Information Architecture for Managing Requirements in IBM?s Rational DOORS(r) Application.

    Energy Technology Data Exchange (ETDEWEB)

    Aragon, Kathryn M.; Eaton, Shelley M.; McCornack, Marjorie Turner; Shannon, Sharon A.

    2014-12-01

    When a requirements engineering effort fails to meet expectations, often times the requirements management tool is blamed. Working with numerous project teams at Sandia National Laboratories over the last fifteen years has shown us that the tool is rarely the culprit; usually it is the lack of a viable information architecture with well- designed processes to support requirements engineering. This document illustrates design concepts with rationale, as well as a proven information architecture to structure and manage information in support of requirements engineering activities for any size or type of project. This generalized information architecture is specific to IBM's Rational DOORS (Dynamic Object Oriented Requirements System) software application, which is the requirements management tool in Sandia's CEE (Common Engineering Environment). This generalized information architecture can be used as presented or as a foundation for designing a tailored information architecture for project-specific needs. It may also be tailored for another software tool. Version 1.0 4 November 201

  3. Psychiatry meets pharmacogenetics for the treatment of revolving door patients with psychiatric disorders.

    Science.gov (United States)

    Panza, Francesco; Lozupone, Madia; Stella, Eleonora; Lofano, Lucia; Gravina, Carolina; Urbano, Maria; Daniele, Antonio; Bellomo, Antonello; Logroscino, Giancarlo; Greco, Antonio; Seripa, Davide

    2016-12-01

    Therapeutic failures (TFs) and adverse drug reactions (ADRs), together with the recurring nature of the clinical course of psychiatric disorders, mainly bipolar disorders (BDs), strongly contributed to the prevalence and frequency of hospital readmissions observed in these patients. This is the revolving door (RD) condition, dramatically rising costs for the management of these patients in psychiatric settings. Areas covered: We searched in the medical literature until May 2016 to review the role of functional variants in the cytochrome P450 (CYP) 2D6 gene on observed ADRs and TFs in RD patients with BDs, conferring a different capacity to metabolize psychotropic drugs. Expert commentary: CYP2D6 functional polymorphisms might directly contributed to the prevalence and frequency of the RD condition, commonly observed in BD patients. Although several environmental and socio-demographic/diagnostic variables such as alcohol/drug abuse, and medication non-compliance accounted for a significant proportion of the ability to predict RD prevalence and frequency, the pharmacogenetics of CYP, particularly CYP2D6, may help to identify BD patients at risk for ADRs and TFs. These patients may be addressed towards alternative treatments, thus improving their quality of life, and reducing RD prevalence and frequency and the overall costs for their management.

  4. Predictors of suicide in the patient population admitted to a locked-door psychiatric acute ward.

    Directory of Open Access Journals (Sweden)

    Roar Fosse

    Full Text Available No prior study appears to have focused on predictors of suicide in the general patient population admitted to psychiatric acute wards. We used a case-control design to investigate the association between suicide risk factors assessed systematically at admission to a locked-door psychiatric acute ward in Norway and subsequent death by suicide.From 2008 to 2013, patients were routinely assessed for suicide risk upon admission to the acute ward with a 17-item check list based on recommendations from the Norwegian Directorate of Health and Social Affairs. Among 1976 patients admitted to the ward, 40 patients, 22 men and 18 women, completed suicide within December 2014.Compared to a matched control group (n = 120, after correction for multiple tests, suicide completers scored significantly higher on two items on the check list: presence of suicidal thoughts and wishing to be dead. An additional four items were significant in non-corrected tests: previous suicide attempts, continuity of suicidal thoughts, having a suicide plan, and feelings of hopelessness, indifference, and/or aggression. A brief scale based on these six items was the only variable associated with suicide in multivariate regression analysis, but its predictive value was poor.Suicide specific ideations may be the most central risk markers for suicide in the general patient population admitted to psychiatric acute wards. However, a low predictive value may question the utility of assessing suicide risk.

  5. Open Rotor Development

    Science.gov (United States)

    Van Zante, Dale E.; Rizzi, Stephen A.

    2016-01-01

    The ERA project executed a comprehensive test program for Open Rotor aerodynamic and acoustic performance. System studies used the data to estimate the fuel burn savings and acoustic margin for an aircraft system with open rotor propulsion. The acoustic measurements were used to produce an auralization that compares the legacy blades to the current generation of open rotor designs.

  6. OpenFlow cookbook

    CERN Document Server

    Smiler S, Kingston

    2015-01-01

    This book is intended for network protocol developers, SDN controller application developers, and academics who would like to understand and develop their own OpenFlow switch or OpenFlow controller in any programming language. With basic understanding of OpenFlow and its components, you will be able to follow the recipes in this book.

  7. DOD Open Government

    Science.gov (United States)

    increase transparency and openness. We encourage you to explore other information on our website to learn Defense Search DOD Open Government: Home Open Government @ DoD Transparency Congressional Inquiries IT Dashboard.gov Regulations.gov Challenge.gov Performance.gov ForeignAssistance.gov Transparency

  8. OpenShift Workshop

    CERN Multimedia

    CERN. Geneva; Rodriguez Peon, Alberto

    2017-01-01

    Workshop to introduce developers to the OpenShift platform available at CERN. Several use cases will be shown, including deploying an existing application into OpenShift. We expect attendees to realize about OpenShift features and general architecture of the service.

  9. Open Source Business Solutions

    Directory of Open Access Journals (Sweden)

    Ion IVAN

    2008-01-01

    Full Text Available This analyses the Open source movement. Open source development process and management is seen different from the classical point of view. This focuses on characteristics and software market tendencies for the main Open source initiatives. It also points out the labor market future evolution for the software developers.

  10. Quickscan open textbooks

    NARCIS (Netherlands)

    Pierre Gorissen

    2015-01-01

    Deze quickscan open textbooks is uitgevoerd in opdracht van SURFnet ter voorbereiding van het seminar over open textbooks op 26 november 2015. Het is nadrukkelijk een quickscan, de beschikbare tijd om literatuur te verzamelen en te beoordelen rond open textbooks was begrensd. Deze quickscan heeft

  11. Development of automatic air intake door control system for exhaust gas. Prevention of contaminated air by controlling A/C air intake door; Haiki gas taio auto naigaiki system no kaihatsu. Eakon suikomiguchi seigyo ni yoru haiki gas no shashitsunai eno shinnyu boshi

    Energy Technology Data Exchange (ETDEWEB)

    Honda, Y; Samukawa, K [Denso Corp., Aichi (Japan)

    1997-10-01

    Thermal comfort in the cabin of vehicle is upgraded by developing the climate control system Passengers must control the intake door of air conditioner to reduce entering Exhaust Gas into the cabin. This paper is concerned with development the automatic intake door control system to acquire high comfort performance of passengers. 8 figs., 1 tab.

  12. Implementing OpenShift

    CERN Document Server

    Miller, Adam

    2013-01-01

    A standard tutorial-based approach to using OpenShift and deploying custom or pre-built web applications to the OpenShift Online cloud.This book is for software developers and DevOps alike who are interested in learning how to use the OpenShift Platform-as-a-Service for developing and deploying applications, how the environment works on the back end, and how to deploy their very own open source Platform-as-a-Service based on the upstream OpenShift Origin project.

  13. OpenSubspace

    DEFF Research Database (Denmark)

    Müller, Emmanuel; Assent, Ira; Günnemann, Stephan

    2009-01-01

    Subspace clustering and projected clustering are recent research areas for clustering in high dimensional spaces. As the field is rather young, there is a lack of comparative studies on the advantages and disadvantages of the different algorithms. Part of the underlying problem is the lack...... of available open source implementations that could be used by researchers to understand, compare, and extend subspace and projected clustering algorithms. In this paper, we discuss the requirements for open source evaluation software. We propose OpenSubspace, an open source framework that meets...... these requirements. OpenSubspace integrates state-of-the-art performance measures and visualization techniques to foster research in subspace and projected clustering....

  14. To Enhance the Fire Resistance Performance of High-Speed Steel Roller Door with Water Film System

    Directory of Open Access Journals (Sweden)

    De-Hua Chung

    2015-01-01

    Full Text Available The structure of high-speed roller door with water film has improved in this study. The flameproof water film system is equipped with a water circulating device to reduce the water consumption of water film system. The water film is generated at the roller box of the high-speed roller door in this study. The heating test is done with the full-scale heating furnace. Both cases of the water film on unexposed surface and water film on exposed surface passed the fire resistance test based on ISO 834, proving that the high-speed roller door with water film system has 120A fire resistance period. The main findings indicate that the water film on exposed surface shows that as the amount of water film evaporated by high temperature inside the furnace must be greater than the evaporation capacity of water film on unexposed surface, the required water supply is 660 L more than the water film on unexposed surface.

  15. Open algebraic surfaces

    CERN Document Server

    Miyanishi, Masayoshi

    2000-01-01

    Open algebraic surfaces are a synonym for algebraic surfaces that are not necessarily complete. An open algebraic surface is understood as a Zariski open set of a projective algebraic surface. There is a long history of research on projective algebraic surfaces, and there exists a beautiful Enriques-Kodaira classification of such surfaces. The research accumulated by Ramanujan, Abhyankar, Moh, and Nagata and others has established a classification theory of open algebraic surfaces comparable to the Enriques-Kodaira theory. This research provides powerful methods to study the geometry and topology of open algebraic surfaces. The theory of open algebraic surfaces is applicable not only to algebraic geometry, but also to other fields, such as commutative algebra, invariant theory, and singularities. This book contains a comprehensive account of the theory of open algebraic surfaces, as well as several applications, in particular to the study of affine surfaces. Prerequisite to understanding the text is a basic b...

  16. Open-ended education

    DEFF Research Database (Denmark)

    Nørgård, Rikke Toft; Paaskesen, Rikke Berggreen

    2016-01-01

    THE ARTICLE DESCRIBES OPEN-ENDED EDUCATION FOR 21ST CENTURY LEARNING AS THE COMING TOGETHER OF OPEN-ENDED TECHNOLOGY, OPEN-ENDED PROJECTS, AND OPEN-ENDED INSTITUTIONS IN WAYS THAT FOSTER AND PROMOTE FUTURE EDUCATION FOR CITIZENSHIP IN SOCIETY. THROUGH THE CASE OF THE CODING PIRATES FUTURE ISLAND......, THE ARTICLE DEMONSTRATES HOW OPEN-ENDED EDUCATION CAN BE PRACTICED TO FOSTER AND PROMOTE TECHNOLOGICAL IMAGINATION, ENTERPRISING, AND PARTICIPATION. THIS PRACTICE IS THEN DEVELOPED INTO A THEORETICAL MODEL FOR THE CONCEPT OF OPEN-ENDED EDUCATION AS A WAY OF AND FRAMEWORK FOR PRACTICING FUTURE EDUCATION FOR 21......ST CENTURY LEARNING WITH NEW TECHNOLOGIES. THE ARTICLE PRESENTS AN ANSWER TO THE CALL FOR 21ST CENTURY LEARNING AS THOROUGHLY COLLABORATIVE, COMMUNICATIVE, CREATIVE, AND CRITICALLY REFLECTIVE THROUGH THE CASE AND THE CONCEPT OF OPEN-ENDED EDUCATION. IT OUTLINES THE IMPLICATIONS OF THIS CALL...

  17. Open Access @ DTU

    DEFF Research Database (Denmark)

    Ekstrøm, Jeannette

    Open Access is high on the agenda in Denmark and internationally. Denmark has announced a national strategy for Open Access that aims to achieve Open Access to 80% in 2017 and 100% in 2022 to peer review research articles. All public Danish funders as well as H2020 requires that all peer review...... articles that is an outcome of their funding will be Open Access. Uploading your full texts (your final author manuscript after review ) to DTU Orbit is a fundamental part of providing Open Access to your research. We are here to answer all your questions with regards to Open Access and related topics...... such as copyright, DTU Orbit, Open Access journals, APCs, Vouchers etc....

  18. Openness, Web 2.0 Technology, and Open Science

    Science.gov (United States)

    Peters, Michael A.

    2010-01-01

    Open science is a term that is being used in the literature to designate a form of science based on open source models or that utilizes principles of open access, open archiving and open publishing to promote scientific communication. Open science increasingly also refers to open governance and more democratized engagement and control of science…

  19. ADA access to passenger vessels : finding safety equivalence solutions for weathertight doors with coamings : Phase 2 : a risk management approach to reconfiguration design solutions

    Science.gov (United States)

    2005-03-01

    This report examines a risk management methodology to provide for both marine safety and disability access at weathertight doors into passenger accommodation spaces on U.S. passenger vessels. The Architectural and Transportation Barriers Compliance B...

  20. OpenSHS: Open Smart Home Simulator

    Directory of Open Access Journals (Sweden)

    Nasser Alshammari

    2017-05-01

    Full Text Available This paper develops a new hybrid, open-source, cross-platform 3D smart home simulator, OpenSHS, for dataset generation. OpenSHS offers an opportunity for researchers in the field of the Internet of Things (IoT and machine learning to test and evaluate their models. Following a hybrid approach, OpenSHS combines advantages from both interactive and model-based approaches. This approach reduces the time and efforts required to generate simulated smart home datasets. We have designed a replication algorithm for extending and expanding a dataset. A small sample dataset produced, by OpenSHS, can be extended without affecting the logical order of the events. The replication provides a solution for generating large representative smart home datasets. We have built an extensible library of smart devices that facilitates the simulation of current and future smart home environments. Our tool divides the dataset generation process into three distinct phases: first design: the researcher designs the initial virtual environment by building the home, importing smart devices and creating contexts; second, simulation: the participant simulates his/her context-specific events; and third, aggregation: the researcher applies the replication algorithm to generate the final dataset. We conducted a study to assess the ease of use of our tool on the System Usability Scale (SUS.

  1. OpenSHS: Open Smart Home Simulator.

    Science.gov (United States)

    Alshammari, Nasser; Alshammari, Talal; Sedky, Mohamed; Champion, Justin; Bauer, Carolin

    2017-05-02

    This paper develops a new hybrid, open-source, cross-platform 3D smart home simulator, OpenSHS, for dataset generation. OpenSHS offers an opportunity for researchers in the field of the Internet of Things (IoT) and machine learning to test and evaluate their models. Following a hybrid approach, OpenSHS combines advantages from both interactive and model-based approaches. This approach reduces the time and efforts required to generate simulated smart home datasets. We have designed a replication algorithm for extending and expanding a dataset. A small sample dataset produced, by OpenSHS, can be extended without affecting the logical order of the events. The replication provides a solution for generating large representative smart home datasets. We have built an extensible library of smart devices that facilitates the simulation of current and future smart home environments. Our tool divides the dataset generation process into three distinct phases: first design: the researcher designs the initial virtual environment by building the home, importing smart devices and creating contexts; second, simulation: the participant simulates his/her context-specific events; and third, aggregation: the researcher applies the replication algorithm to generate the final dataset. We conducted a study to assess the ease of use of our tool on the System Usability Scale (SUS).

  2. 30 CFR 57.22205 - Doors on main fans (I-A, II-A, III, and V-A mines).

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Doors on main fans (I-A, II-A, III, and V-A... main fans (I-A, II-A, III, and V-A mines). In mines ventilated by multiple main fans, each main fan... reversal through the fan. The doors shall be located so that they are not in direct line with explosive...

  3. ANALISA KEKUATAN KONSTRUKSI SIDE RAMP DOOR SISTEM STEEL WIRE ROPE PADA KM. DHARMA KENCANA II AKIBAT BEBAN STATIS DENGAN METODE ELEMEN HINGGA

    Directory of Open Access Journals (Sweden)

    Imam Pujo Mulyatno

    2012-04-01

    Full Text Available KM. DHARMA KENCANA II adalah kapal tipe Ro - Ro (Passanger Ship yang memiliki rute pelayaran Surabaya - Kumai - Semarang yang mampu mengangkut penumpang dan kendaraan dalam jumlah yang relatif banyak. Untuk memudahkan akses keluar masuk kendaraan yang akan diangkut, maka kapal ini dilengkapi dengan empat buah ramp door sistem steel wire rope, salah satunya adalah ramp door yang terletak dibagian kiri lambung kapal (side ramp door. Side ramp door akan menerima beban statis secara berulang - ulang sehingga dapat mengakibatkan deformasi, keretakan, kerusakan, dll. Penelitian tentang kekuatan konstruksi side ramp door perlu diperhatikan dan dilakukan dimana tegangan yang diakibatkan oleh beban yang mengenainya tidak boleh melebihi batas maksimum σyield bahan dan σijin berdasarkan rules dari klas, adapun acuan rules yang dipakai dalam penelitian ini adalah berdasarkan rules Biro Klasifikasi Indonesia. Analisa kekuatan konstruksi side ramp door dilakukan dengan menggunakan program berbasis FEM sedangkan untuk pemodelan dilakukan dengan menggunakan program berbasis CAD. Analisa yang digunakan adalah analisa beban statis untuk mengetahui karakteristik dan letak tegangan terbesar pada konstruksi side ramp door berdasarkan empat variasi pembebanan. Hasil analisa menggunakan program berbasis FEM didapatkan hasil maximum stress terbesar terjadi pada kondisi side ramp door dengan beban kendaraan truck yaitu sebesar 93,91 N/mm2 dimana daerah paling kritis terjadi pada node 22097 yang terletak pada gading nomor 8 bagian memanjang dan gading nomor 1 bagian melintang. Tegangan ini masih dalam kondisi aman karena setelah dibandingan dengan σyield bahan sebesar 400 N/mm2 dan σijin berdasarkan rules BKI sebesar 225,24 N/mm2 menghasilkan nilai safety factor sebesar 3,87 dan 2,18.

  4. Open Babel: An open chemical toolbox

    Directory of Open Access Journals (Sweden)

    O'Boyle Noel M

    2011-10-01

    Full Text Available Abstract Background A frequent problem in computational modeling is the interconversion of chemical structures between different formats. While standard interchange formats exist (for example, Chemical Markup Language and de facto standards have arisen (for example, SMILES format, the need to interconvert formats is a continuing problem due to the multitude of different application areas for chemistry data, differences in the data stored by different formats (0D versus 3D, for example, and competition between software along with a lack of vendor-neutral formats. Results We discuss, for the first time, Open Babel, an open-source chemical toolbox that speaks the many languages of chemical data. Open Babel version 2.3 interconverts over 110 formats. The need to represent such a wide variety of chemical and molecular data requires a library that implements a wide range of cheminformatics algorithms, from partial charge assignment and aromaticity detection, to bond order perception and canonicalization. We detail the implementation of Open Babel, describe key advances in the 2.3 release, and outline a variety of uses both in terms of software products and scientific research, including applications far beyond simple format interconversion. Conclusions Open Babel presents a solution to the proliferation of multiple chemical file formats. In addition, it provides a variety of useful utilities from conformer searching and 2D depiction, to filtering, batch conversion, and substructure and similarity searching. For developers, it can be used as a programming library to handle chemical data in areas such as organic chemistry, drug design, materials science, and computational chemistry. It is freely available under an open-source license from http://openbabel.org.

  5. Open Babel: An open chemical toolbox

    Science.gov (United States)

    2011-01-01

    Background A frequent problem in computational modeling is the interconversion of chemical structures between different formats. While standard interchange formats exist (for example, Chemical Markup Language) and de facto standards have arisen (for example, SMILES format), the need to interconvert formats is a continuing problem due to the multitude of different application areas for chemistry data, differences in the data stored by different formats (0D versus 3D, for example), and competition between software along with a lack of vendor-neutral formats. Results We discuss, for the first time, Open Babel, an open-source chemical toolbox that speaks the many languages of chemical data. Open Babel version 2.3 interconverts over 110 formats. The need to represent such a wide variety of chemical and molecular data requires a library that implements a wide range of cheminformatics algorithms, from partial charge assignment and aromaticity detection, to bond order perception and canonicalization. We detail the implementation of Open Babel, describe key advances in the 2.3 release, and outline a variety of uses both in terms of software products and scientific research, including applications far beyond simple format interconversion. Conclusions Open Babel presents a solution to the proliferation of multiple chemical file formats. In addition, it provides a variety of useful utilities from conformer searching and 2D depiction, to filtering, batch conversion, and substructure and similarity searching. For developers, it can be used as a programming library to handle chemical data in areas such as organic chemistry, drug design, materials science, and computational chemistry. It is freely available under an open-source license from http://openbabel.org. PMID:21982300

  6. The Grid is open, so please come in…

    CERN Multimedia

    Caroline Duc

    2012-01-01

    During the week of 17 to 21 September 2012, the European Grid Infrastructure Technical Forum was held in Prague. At this event, organised by EGI (European Grid Infrastructure), grid computing experts set about tackling the challenge of opening their doors to a still wider community. This provided an excellent opportunity to look back at similar initiatives by EGI in the past.   EGI's aim is to coordinate the computing resources of the European Grid Infrastructure and to encourage exchanges between the collaboration and users. Initially dedicated mainly to high-energy particle physics, the European Grid Infrastructure is now welcoming new disciplines and communities. The EGI Technical Forum is organised once a year and is a key date in the community's calendar. The 2012 edition, organised in Prague, was an opportunity to review the advances made and to look constructively into a future where the use of computing grids becomes more widespread. Since 2010, EGI has supported the ...

  7. Significant change in the construction of a door to a room with slowed down neutron field by means of commonly used inexpensive protective materials.

    Science.gov (United States)

    Konefał, Adam; Łaciak, Marcin; Dawidowska, Anna; Osewski, Wojciech

    2014-12-01

    The detailed analysis of nuclear reactions occurring in materials of the door is presented for the typical construction of an entrance door to a room with a slowed down neutron field. The changes in the construction of the door were determined to reduce effectively the level of neutron and gamma radiation in the vicinity of the door in a room adjoining the neutron field room. Optimisation of the door construction was performed with the use of Monte Carlo calculations (GEANT4). The construction proposed in this paper bases on the commonly used inexpensive protective materials such as borax (13.4 cm), lead (4 cm) and stainless steel (0.1 and 0.5 cm on the side of the neutron field room and of the adjoining room, respectively). The improved construction of the door, worked out in the presented studies, can be an effective protection against neutrons with energies up to 1 MeV. © The Author 2013. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  8. Seksuele dienstverlening door mannen in Den Haag: Ontwikkelingen op het internet

    Directory of Open Access Journals (Sweden)

    Paul van Gelder

    2011-08-01

    Full Text Available Seksuele dienstverlening door mannen in Den Haag: Ontwikkelingen op het internet Met de legalisering van het prostitutiebedrijf en de snelle opkomst van het internet zijn mannelijke seksuele dienstverleners in Nederland uit het zicht geraakt. De meeste boysclubs sloten hun deuren. Deze zaken, samen met de aangescherpte handhaving op openbare ontmoetingsplaatsen, vormen redenen voor deze groep om online te gaan. In 2009 is er in Den Haag een onderzoek uitgevoerd naar deze specifieke doelgroep, met speciale aandacht voor het internet. Mogelijke veranderingen in de behoeften en vragen bij mannelijke seksuele dienstverleners zijn ook onderzocht. In hoeverre zijn zij op het internet bereikbaar voor informatie, advies of hulp? Bij het online verrichten van onderzoek en veldwerk blijkt het signaleren wel goed uit te werken maar is het nog zoeken naar een “praatpaal-functie”. Male sexual services in The Hague: developments on the internet Since the legalization of prostitution and the rapid rise of the internet, male providers of sexual services got out of sight in the Netherlands. Most boysclubs had to close down. These matters, along with the tighter controls at cruising areas are reasons why this group has turned to the internet to offer their services. In 2009, a research was carried out on the nature and extent of male sexual services in the region of The Hague, with a special focus on the internet. Possible changes in the needs and problems of male sexual providers were also explored. To what extent can they be reached by means of the internet, in order to provide them with information, advise or assistance? On the basis of the research data it can be concluded that the internet can be an important tool in the signalling and finding of male sexual providers. Getting more acquainted with them and gaining their trust, however, is still rather hard to realize.

  9. Embracing life-the Bethlehem Schools' Project, an "icebreaker" and "a foot in the door".

    Science.gov (United States)

    Hocking, Mary

    2018-01-01

    This workshop details a Partnership involving a High school, a Hospital (Calvary Health Care Bethlehem), La Trobe University and Palliative Care Victoria which seeks to support Community Capacity and resilience in dealing with Life-Limiting illness, death, dying and Loss. This alliance has produced an educational resource which may be used, not only as a tool to normalize death, but also as a means of exploring 'keys to well-being' at any stage of life, through any loss or challenge. This workshop features a template which has been trialled, adapted and evaluated in High School, workshop and Hospital induction settings within Australia. Responses thus far have been "overwhelmingly positive". Translating evidence of positive outcomes into Education & Health Care Systems, is a challenge-this workshop offers a means of approaching both. The conclusion of the workshop provides a number of insights: (I) engaging communities in discussions about well-being and harnessing the insights of youth is a palatable means of discussing well-being at end-of-life; (II) what we know, as a community about supporting people with life-limiting illness is applicable across the span of life-not just at the end; (III) just as it takes a village to raise a child-it takes a village to ensure a quality end-of life experience. What began as a one-off hospital immersion for Secondary School students has grown to become a sustainable educational resource, applicable across a number of domains-with the capacity to become an evidence-based means of increasing community EOL capacity. This workshop details the evolution of a community partnership, which produced an evaluated, sustainable, educational resource encouraging conversations about death and loss whilst emphasizing the essentials of well-being. It is a potential "foot in the door" of the education system and an "ice-breaker" for new staff/students to Palliative care.

  10. CERN's 50th anniversary open day attracts record number of visitors: an estimated 32,000 visitors, from across Europe and beyond, flocked to the laboratory for a day of tours, displays and presentations.

    CERN Multimedia

    Patrice Loiez

    2004-01-01

    When CERN opened its doors to the public for its open day on 16 October, the laboratory took on the air of a county fair. Children took rides around the site in a big lorry, visitors ate ice cream that had been handmade in a flash using liquid nitrogen, and crowds strolled the lanes as they visited more than 50 events across various sites in Switzerland and France.

  11. Open Data and Beyond

    Directory of Open Access Journals (Sweden)

    Frederika Welle Donker

    2016-04-01

    Full Text Available In recent years, there has been an increasing trend of releasing public sector information as open data. Governments worldwide see the potential benefits of opening up their data. The potential benefits are more transparency, increased governmental efficiency and effectiveness, and external benefits, including societal and economic benefits. The private sector also recognizes potential benefits of making their datasets available as open data. One such company is Liander, an energy network administrator in the Netherlands. Liander views open data as a contributing factor to energy conservation. However, to date there has been little research done into the actual effects of open data. This research has developed a monitoring framework to assess the effects of open data, and has applied the framework to Liander’s small-scale energy consumption dataset.

  12. Visitors speak openly on the Open Day

    CERN Multimedia

    2004-01-01

    On Open Day, CERN was filled with visitors from around Europe—and beyond—who toured the LHC detector sites and visited a multitude of experimental halls and workshops across the Meyrin and Prevessin sites, the vast majority in buildings normally closed to the public.

  13. Open-Source Colorimeter

    OpenAIRE

    Anzalone, Gerald C.; Glover, Alexandra G.; Pearce, Joshua M.

    2013-01-01

    The high cost of what have historically been sophisticated research-related sensors and tools has limited their adoption to a relatively small group of well-funded researchers. This paper provides a methodology for applying an open-source approach to design and development of a colorimeter. A 3-D printable, open-source colorimeter utilizing only open-source hardware and software solutions and readily available discrete components is discussed and its performance compared to a commercial porta...

  14. Open Access Monitor - DK

    DEFF Research Database (Denmark)

    Svendsen, Michael; Hansen, Lars Asger Juel; Andersen, Dorte

    2017-01-01

    Open Access Monitor - DK (OAM-DK) is a 2-year DEFF funded [DEFF.2016-0018] national project running in 2017-2018 with the aim of collecting, documenting and administrating Open Access publishing costs. OAM-DK is lead by Copenhagen University Library under the Royal Danish Library with participation...... of all Danish University Libraries. This poster presents the first results of Open Access costs related to 2015 publications at the The University of Copenhagen....

  15. Openly Published Environmental Sensing (OPEnS) | Advancing Open-Source Research, Instrumentation, and Dissemination

    Science.gov (United States)

    Udell, C.; Selker, J. S.

    2017-12-01

    The increasing availability and functionality of Open-Source software and hardware along with 3D printing, low-cost electronics, and proliferation of open-access resources for learning rapid prototyping are contributing to fundamental transformations and new technologies in environmental sensing. These tools invite reevaluation of time-tested methodologies and devices toward more efficient, reusable, and inexpensive alternatives. Building upon Open-Source design facilitates community engagement and invites a Do-It-Together (DIT) collaborative framework for research where solutions to complex problems may be crowd-sourced. However, barriers persist that prevent researchers from taking advantage of the capabilities afforded by open-source software, hardware, and rapid prototyping. Some of these include: requisite technical skillsets, knowledge of equipment capabilities, identifying inexpensive sources for materials, money, space, and time. A university MAKER space staffed by engineering students to assist researchers is one proposed solution to overcome many of these obstacles. This presentation investigates the unique capabilities the USDA-funded Openly Published Environmental Sensing (OPEnS) Lab affords researchers, within Oregon State and internationally, and the unique functions these types of initiatives support at the intersection of MAKER spaces, Open-Source academic research, and open-access dissemination.

  16. Open3DQSAR

    DEFF Research Database (Denmark)

    Tosco, Paolo; Balle, Thomas

    2011-01-01

    Open3DQSAR is a freely available open-source program aimed at chemometric analysis of molecular interaction fields. MIFs can be imported from different sources (GRID, CoMFA/CoMSIA, quantum-mechanical electrostatic potential or electron density grids) or generated by Open3DQSAR itself. Much focus...... has been put on automation through the implementation of a scriptable interface, as well as on high computational performance achieved by algorithm parallelization. Flexibility and interoperability with existing molecular modeling software make Open3DQSAR a powerful tool in pharmacophore assessment...

  17. Open data for citizens

    DEFF Research Database (Denmark)

    Götzen, Amalia De; Morelli, Nicola

    2016-01-01

    A large quantity of open data is now available to institutions, business and citizens. The potential of such new resource, though, has not been explored yet, also because of a lack of perspectives and scenarios on how open data can be used. The workshop aims at broadening the perspectives...... on the use of open data by investigating new scenarios for a wide use of open data, where citizens without any IT skills can be involved in a co-design session with the relevant stakeholders....

  18. Open Media Science

    DEFF Research Database (Denmark)

    Møller Moltke Martiny, Kristian; Pedersen, David Budtz; Hansted, Allan Alfred Birkegaard

    2016-01-01

    In this article, we present three challenges to the emerging Open Science (OS) movement: the challenge of communication, collaboration and cultivation of scientific research. We argue that to address these challenges OS needs to include other forms of data than what can be captured in a text...... and extend into a fully-fledged Open Media movement engaging with new media and non-traditional formats of science communication. We discuss two cases where experiments with open media have driven new collaborations between scientists and documentarists. We use the cases to illustrate different advantages...... of using open media to face the challenges of OS....

  19. Open source community organization

    CSIR Research Space (South Africa)

    Molefe, Onkgopotse M

    2009-05-01

    Full Text Available Open Source communities (OSCs), sometimes referred to as virtual or online communities play a significant role in terms of the contribution they continue to make in producing user-friendly Open Source Software (OSS) solutions. Many projects have...

  20. Demystifying Open Access

    International Nuclear Information System (INIS)

    Mele, Salvatore

    2007-01-01

    The tenets of Open Access are to grant anyone, anywhere and anytime free access to the results of scientific research. HEP spearheaded the Open Access dissemination of scientific results with the mass mailing of preprints in the pre-WWW era and with the launch of the arXiv preprint system at the dawn of the '90s. The HEP community is now ready for a further push to Open Access while retaining all the advantages of the peer-review system and, at the same time, bring the spiralling cost of journal subscriptions under control. I will present a possible plan for the conversion to Open Access of HEP peer-reviewed journals, through a consortium of HEP funding agencies, laboratories and libraries: SCOAP3 (Sponsoring Consortium for Open Access Publishing in Particle Physics). SCOAP3 will engage with scientific publishers towards building a sustainable model for Open Access publishing, which is as transparent as possible for HEP authors. The current system in which journals income comes from subscription fees is replaced with a scheme where SCOAP3 compensates publishers for the costs incurred to organise the peer-review service and give Open Access to the final version of articles. SCOAP3 will be funded by all countries active in HEP under a 'fair share' scenario, according to their production of HEP articles. In this talk I will present a short overview of the history of Open Access in HEP, the details of the SCOAP3 model and the outlook for its implementation.