WorldWideScience

Sample records for one-bead one-compound methodology

  1. Sensitive electrospray mass spectrometry analysis of one-bead-one-compound peptide libraries labeled by quaternary ammonium salts.

    Science.gov (United States)

    Bąchor, Remigiusz; Cydzik, Marzena; Rudowska, Magdalena; Kluczyk, Alicja; Stefanowicz, Piotr; Szewczuk, Zbigniew

    2012-08-01

    A rapid and straightforward method for high-throughput analysis of single resin beads from one-bead-one-compound combinatorial libraries with high resolution electrospray ionization tandem mass spectrometry (HR ESI-MS/MS) is presented. The application of an efficient method of peptide derivatization by quaternary ammonium salts (QAS) formation increases ionization efficiency and reduces the detection limit, allowing analysis of trace amounts of compounds by ESI-MS. Peptides, synthesized on solid support, contain a new cleavable linker composed of a Peg spacer (9-aza-3,6,12,15-tetraoxa-10-on-heptadecanoic acid), lysine with ɛ-amino group marked by the N,N,N-triethylglycine salt, and methionine, which makes possible the selective cleavage by cyanogen bromide. Even a small portion of peptides derivatized by QAS cleaved from a single resin bead is sufficient for sequencing by HR ESI-MS/MS experiments. The developed strategy was applied to a small training library of α chymotrypsin substrates. The obtained results confirm the applicability of the proposed method in combinatorial chemistry.

  2. Confocal nanoscanning, bead picking (CONA): PickoScreen microscopes for automated and quantitative screening of one-bead one-compound libraries.

    Science.gov (United States)

    Hintersteiner, Martin; Buehler, Christof; Uhl, Volker; Schmied, Mario; Müller, Jürgen; Kottig, Karsten; Auer, Manfred

    2009-01-01

    Solid phase combinatorial chemistry provides fast and cost-effective access to large bead based libraries with compound numbers easily exceeding tens of thousands of compounds. Incubating one-bead one-compound library beads with fluorescently labeled target proteins and identifying and isolating the beads which contain a bound target protein, potentially represents one of the most powerful generic primary high throughput screening formats. On-bead screening (OBS) based on this detection principle can be carried out with limited automation. Often hit bead detection, i.e. recognizing beads with a fluorescently labeled protein bound to the compound on the bead, relies on eye-inspection under a wide-field microscope. Using low resolution detection techniques, the identification of hit beads and their ranking is limited by a low fluorescence signal intensity and varying levels of the library beads' autofluorescence. To exploit the full potential of an OBS process, reliable methods for both automated quantitative detection of hit beads and their subsequent isolation are needed. In a joint collaborative effort with Evotec Technologies (now Perkin-Elmer Cellular Technologies Germany GmbH), we have built two confocal bead scanner and picker platforms PS02 and a high-speed variant PS04 dedicated to automated high resolution OBS. The PS0X instruments combine fully automated confocal large area scanning of a bead monolayer at the bottom of standard MTP plates with semiautomated isolation of individual hit beads via hydraulic-driven picker capillaries. The quantification of fluorescence intensities with high spatial resolution in the equatorial plane of each bead allows for a reliable discrimination between entirely bright autofluorescent beads and real hit beads which exhibit an increased fluorescence signal at the outer few micrometers of the bead. The achieved screening speed of up to 200,000 bead assayed in less than 7 h and the picking time of approximately 1 bead

  3. A Wide-Field Fluorescence Microscope Extension for Ultrafast Screening of One-Bead One-Compound Libraries Using a Spectral Image Subtraction Approach.

    Science.gov (United States)

    Heusermann, Wolf; Ludin, Beat; Pham, Nhan T; Auer, Manfred; Weidemann, Thomas; Hintersteiner, Martin

    2016-05-09

    The increasing involvement of academic institutions and biotech companies in drug discovery calls for cost-effective methods to identify new bioactive molecules. Affinity-based on-bead screening of combinatorial one-bead one-compound libraries combines a split-mix synthesis design with a simple protein binding assay operating directly at the bead matrix. However, one bottleneck for academic scale on-bead screening is the unavailability of a cheap, automated, and robust screening platform that still provides a quantitative signal related to the amount of target protein binding to individual beads for hit bead ranking. Wide-field fluorescence microscopy has long been considered unsuitable due to significant broad spectrum autofluorescence of the library beads in conjunction with low detection sensitivity. Herein, we demonstrate how such a standard microscope equipped with LED-based excitation and a modern CMOS camera can be successfully used for selecting hit beads. We show that the autofluorescence issue can be overcome by an optical image subtraction approach that yields excellent signal-to-noise ratios for the detection of bead-associated target proteins. A polymer capillary attached to a semiautomated bead-picking device allows the operator to efficiently isolate individual hit beads in less than 20 s. The system can be used for ultrafast screening of >200,000 bead-bound compounds in 1.5 h, thereby making high-throughput screening accessible to a wider group within the scientific community.

  4. Identification of cancer specific ligands from one-bead one compound combinatorial libraries to develop theranostics agents against oral squamous cell carcinoma

    Science.gov (United States)

    Yang, Frances Fan

    Background: Oral squamous cell carcinoma (OSCC) is one of the most prevalent disease worldwide. One-bead one-compound (OBOC) combinatorial technology is a powerful method to identify peptidomimetic ligands against a variety of receptors on cell surfaces. We therefore hypothesized that cancer specific ligands against OSCC might be identified and can be conjugated to optical dyes or nanocarriers to develop theranostic agents against OSCC. Material and methods: Different OSCC cell lines were incubated with OBOC libraries and beads with cell binding were sorted and then screened with normal human cells to identify peptide-beads binding to different OSCC cell lines but not binding to normal human cells. The molecular probes of OSCC were developed by biotinylating the carboxyl end of the ligands. OSCC theranostic agents were developed by decorating LLY13 with NPs and evaluated by using orthotopic bioluminescent oral cancer model. Results: Six OSCC specific ligands were discovered. Initial peptide-histochemistry study indicated that LLY12 and LLY13 were able to specifically detect OSCC cells grown on chamber slides at the concentration of 1 muM. In addition, LLY13 was found to penetrate into the OSCC cells and accumulate in the cytoplasm, and nucleus. After screened with a panel of integrin antibodies, only anti-alpha3 antibody was able to block most of OSCC cells binding to the LLY13 beads. OSCC theranostic agents developed using targeting LLY13 micelles (25+/- 4nm in diameter) were more efficient in binding to HSC-3 cancer cells compared to non-targeting micelles. Ex vivo images demonstrated that xenografts from the mice with targeting micelles appeared to have higher signals than the non-targeting groups. Conclusion: LLY13 has promising in vitro and in vivo targeting activity against OSCC. In addition, LLY13 is also able to penetrate into cancer cells via endocytosis. Initial study indicated that alpha3 integrin might partially be the corresponding receptor involved

  5. A two-channel detection method for autofluorescence correction and efficient on-bead screening of one-bead one-compound combinatorial libraries using the COPAS fluorescence activated bead sorting system

    International Nuclear Information System (INIS)

    Hintersteiner, Martin; Auer, Manfred

    2013-01-01

    One-bead one-compound combinatorial library beads exhibit varying levels of autofluorescence after solid phase combinatorial synthesis. Very often this causes significant problems for automated on-bead screening using TentaGel beads and fluorescently labeled target proteins. Herein, we present a method to overcome this limitation when fluorescence activated bead sorting is used as the screening method. We have equipped the COPAS bead sorting instrument with a high-speed profiling unit and developed a spectral autofluorescence correction method. The correction method is based on a simple algebraic operation using the fluorescence data from two detection channels and is applied on-the-fly in order to reliably identify hit beads by COPAS bead sorting. Our method provides a practical tool for the fast and efficient isolation of hit beads from one-bead one-compound library screens using either fluorescently labeled target proteins or biotinylated target proteins. This method makes hit bead identification easier and more reliable. It reduces false positives and eliminates the need for time-consuming pre-sorting of library beads in order to remove autofluorescent beads. (technical note)

  6. Combination cancer chemotherapy with one compound: pluripotent bradykinin antagonists.

    Science.gov (United States)

    Stewart, John M; Gera, Lajos; Chan, Daniel C; York, Eunice J; Simkeviciene, Vitalija; Bunn, Paul A; Taraseviciene-Stewart, Laimute

    2005-08-01

    Lung and prostate cancers are major health problems worldwide. Treatments with standard chemotherapy agents are relatively ineffective. Combination chemotherapy gives better treatment than a single agent because the drugs can inhibit the cancer in different pathways, but new therapeutic agents are needed for the treatment of both tumor types. Bradykinin (BK) antagonists offer advantages of combination therapy in one compound. These promising multitargeted anti-cancer compounds selectively stimulate apoptosis in cancers and also inhibit both angiogenesis and matrix metalloprotease (MMP) action in treated lung and prostate tumors in nude mice. The highly potent, metabolism-resistant bradykinin antagonist peptide dimer, B-9870 [SUIM-(DArg-Arg-Pro-Hyp-Gly-Igl-Ser-DIgl-Oic-Arg)2] (SUIM=suberimidyl; Hyp=4-hydroxyproline; Igl=alpha-(2-indanyl)glycine; Oic=octahydroindole-2-carboxylic acid) and its non-peptide mimetic, BKM-570 [2,3,4,5,6-pentafluorocinnamoyl-(o-2,6-dichlorobenzyl)-L-tyrosine-N-(4-amino-2,2,6,6-tetramethylpiperidyl)amide] are superior to the widely used but toxic chemotherapeutic drugs cisplatin and taxotere. In certain combinations, they act synergistically with standard anti-cancer drugs. Due to its structure and biological activity, BKM-570 is an attractive lead compound for derivatization and evaluation for lung and prostate cancer drugs.

  7. On methodology

    DEFF Research Database (Denmark)

    Cheesman, Robin; Faraone, Roque

    2002-01-01

    This is an English version of the methodology chapter in the authors' book "El caso Berríos: Estudio sobre información errónea, desinformación y manipulación de la opinión pública".......This is an English version of the methodology chapter in the authors' book "El caso Berríos: Estudio sobre información errónea, desinformación y manipulación de la opinión pública"....

  8. Methodological guidelines

    International Nuclear Information System (INIS)

    Halsnaes, K.; Callaway, J.M.; Meyer, H.J.

    1999-01-01

    The guideline document establishes a general overview of the main components of climate change mitigation assessment. This includes an outline of key economic concepts, scenario structure, common assumptions, modelling tools and country study assumptions. The guidelines are supported by Handbook Reports that contain more detailed specifications of calculation standards, input assumptions and available tools. The major objectives of the project have been provided a methodology, an implementing framework and a reporting system which countries can follow in meeting their future reporting obligations under the FCCC and for GEF enabling activities. The project builds upon the methodology development and application in the UNEP National Abatement Coasting Studies (UNEP, 1994a). The various elements provide countries with a road map for conducting climate change mitigation studies and submitting national reports as required by the FCCC. (au) 121 refs

  9. Methodological guidelines

    Energy Technology Data Exchange (ETDEWEB)

    Halsnaes, K.; Callaway, J.M.; Meyer, H.J.

    1999-04-01

    The guideline document establishes a general overview of the main components of climate change mitigation assessment. This includes an outline of key economic concepts, scenario structure, common assumptions, modelling tools and country study assumptions. The guidelines are supported by Handbook Reports that contain more detailed specifications of calculation standards, input assumptions and available tools. The major objectives of the project have been provided a methodology, an implementing framework and a reporting system which countries can follow in meeting their future reporting obligations under the FCCC and for GEF enabling activities. The project builds upon the methodology development and application in the UNEP National Abatement Coasting Studies (UNEP, 1994a). The various elements provide countries with a road map for conducting climate change mitigation studies and submitting national reports as required by the FCCC. (au) 121 refs.

  10. MIRD methodology

    International Nuclear Information System (INIS)

    Rojo, Ana M.; Gomez Parada, Ines

    2004-01-01

    The MIRD (Medical Internal Radiation Dose) system was established by the Society of Nuclear Medicine of USA in 1960 to assist the medical community in the estimation of the dose in organs and tissues due to the incorporation of radioactive materials. Since then, 'MIRD Dose Estimate Report' (from the 1 to 12) and 'Pamphlets', of great utility for the dose calculations, were published. The MIRD system was planned essentially for the calculation of doses received by the patients during nuclear medicine diagnostic procedures. The MIRD methodology for the absorbed doses calculations in different tissues is explained

  11. PSA methodology

    Energy Technology Data Exchange (ETDEWEB)

    Magne, L

    1997-12-31

    The purpose of this text is first to ask a certain number of questions on the methods related to PSAs. Notably we will explore the positioning of the French methodological approach - as applied in the EPS 1300{sup 1} and EPS 900{sup 2} PSAs - compared to other approaches (Part One). This reflection leads to more general reflection: what contents, for what PSA? This is why, in Part Two, we will try to offer a framework for definition of the criteria a PSA should satisfy to meet the clearly identified needs. Finally, Part Three will quickly summarize the questions approached in the first two parts, as an introduction to the debate. 15 refs.

  12. PSA methodology

    International Nuclear Information System (INIS)

    Magne, L.

    1996-01-01

    The purpose of this text is first to ask a certain number of questions on the methods related to PSAs. Notably we will explore the positioning of the French methodological approach - as applied in the EPS 1300 1 and EPS 900 2 PSAs - compared to other approaches (Part One). This reflection leads to more general reflection: what contents, for what PSA? This is why, in Part Two, we will try to offer a framework for definition of the criteria a PSA should satisfy to meet the clearly identified needs. Finally, Part Three will quickly summarize the questions approached in the first two parts, as an introduction to the debate. 15 refs

  13. Testing methodologies

    Energy Technology Data Exchange (ETDEWEB)

    Bender, M.A.

    1990-01-01

    Several methodologies are available for screening human populations for exposure to ionizing radiation. Of these, aberration frequency determined in peripheral blood lymphocytes is the best developed. Individual exposures to large doses can easily be quantitated, and population exposures to occupational levels can be detected. However, determination of exposures to the very low doses anticipated from a low-level radioactive waste disposal site is more problematical. Aberrations occur spontaneously, without known cause. Exposure to radiation induces no new or novel types, but only increases their frequency. The limitations of chromosomal aberration dosimetry for detecting low level radiation exposures lie mainly in the statistical signal to noise'' problem, the distribution of aberrations among cells and among individuals, and the possible induction of aberrations by other environmental occupational or medical exposures. However, certain features of the human peripheral lymphocyte-chromosomal aberration system make it useful in screening for certain types of exposures. Future technical developments may make chromosomal aberration dosimetry more useful for low-level radiation exposures. Other methods, measuring gene mutations or even minute changes on the DNA level, while presently less will developed techniques, may eventually become even more practical and sensitive assays for human radiation exposure. 15 refs.

  14. Testing methodologies

    International Nuclear Information System (INIS)

    Bender, M.A.

    1990-01-01

    Several methodologies are available for screening human populations for exposure to ionizing radiation. Of these, aberration frequency determined in peripheral blood lymphocytes is the best developed. Individual exposures to large doses can easily be quantitated, and population exposures to occupational levels can be detected. However, determination of exposures to the very low doses anticipated from a low-level radioactive waste disposal site is more problematical. Aberrations occur spontaneously, without known cause. Exposure to radiation induces no new or novel types, but only increases their frequency. The limitations of chromosomal aberration dosimetry for detecting low level radiation exposures lie mainly in the statistical ''signal to noise'' problem, the distribution of aberrations among cells and among individuals, and the possible induction of aberrations by other environmental occupational or medical exposures. However, certain features of the human peripheral lymphocyte-chromosomal aberration system make it useful in screening for certain types of exposures. Future technical developments may make chromosomal aberration dosimetry more useful for low-level radiation exposures. Other methods, measuring gene mutations or even minute changes on the DNA level, while presently less will developed techniques, may eventually become even more practical and sensitive assays for human radiation exposure. 15 refs

  15. Clinical trial methodology

    National Research Council Canada - National Science Library

    Peace, Karl E; Chen, Ding-Geng

    2011-01-01

    ... in the pharmaceutical industry, Clinical trial methodology emphasizes the importance of statistical thinking in clinical research and presents the methodology as a key component of clinical research...

  16. Scenario development methodologies

    International Nuclear Information System (INIS)

    Eng, T.; Hudson, J.; Stephansson, O.

    1994-11-01

    In the period 1981-1994, SKB has studied several methodologies to systematize and visualize all the features, events and processes (FEPs) that can influence a repository for radioactive waste in the future. All the work performed is based on the terminology and basic findings in the joint SKI/SKB work on scenario development presented in the SKB Technical Report 89-35. The methodologies studied are a) Event tree analysis, b) Influence diagrams and c) Rock Engineering Systems (RES) matrices. Each one of the methodologies is explained in this report as well as examples of applications. One chapter is devoted to a comparison between the two most promising methodologies, namely: Influence diagrams and the RES methodology. In conclusion a combination of parts of the Influence diagram and the RES methodology is likely to be a promising approach. 26 refs

  17. Reliability Centered Maintenance - Methodologies

    Science.gov (United States)

    Kammerer, Catherine C.

    2009-01-01

    Journal article about Reliability Centered Maintenance (RCM) methodologies used by United Space Alliance, LLC (USA) in support of the Space Shuttle Program at Kennedy Space Center. The USA Reliability Centered Maintenance program differs from traditional RCM programs because various methodologies are utilized to take advantage of their respective strengths for each application. Based on operational experience, USA has customized the traditional RCM methodology into a streamlined lean logic path and has implemented the use of statistical tools to drive the process. USA RCM has integrated many of the L6S tools into both RCM methodologies. The tools utilized in the Measure, Analyze, and Improve phases of a Lean Six Sigma project lend themselves to application in the RCM process. All USA RCM methodologies meet the requirements defined in SAE JA 1011, Evaluation Criteria for Reliability-Centered Maintenance (RCM) Processes. The proposed article explores these methodologies.

  18. Introduction to LCA Methodology

    DEFF Research Database (Denmark)

    Hauschild, Michael Z.

    2018-01-01

    In order to offer the reader an overview of the LCA methodology in the preparation of the more detailed description of its different phases, a brief introduction is given to the methodological framework according to the ISO 14040 standard and the main elements of each of its phases. Emphasis...

  19. Methodologies, languages and tools

    International Nuclear Information System (INIS)

    Amako, Katsuya

    1994-01-01

    This is a summary of the open-quotes Methodologies, Languages and Toolsclose quotes session in the CHEP'94 conference. All the contributions to methodologies and languages are relevant to the object-oriented approach. Other topics presented are related to various software tools in the down-sized computing environment

  20. Archetype modeling methodology.

    Science.gov (United States)

    Moner, David; Maldonado, José Alberto; Robles, Montserrat

    2018-03-01

    Clinical Information Models (CIMs) expressed as archetypes play an essential role in the design and development of current Electronic Health Record (EHR) information structures. Although there exist many experiences about using archetypes in the literature, a comprehensive and formal methodology for archetype modeling does not exist. Having a modeling methodology is essential to develop quality archetypes, in order to guide the development of EHR systems and to allow the semantic interoperability of health data. In this work, an archetype modeling methodology is proposed. This paper describes its phases, the inputs and outputs of each phase, and the involved participants and tools. It also includes the description of the possible strategies to organize the modeling process. The proposed methodology is inspired by existing best practices of CIMs, software and ontology development. The methodology has been applied and evaluated in regional and national EHR projects. The application of the methodology provided useful feedback and improvements, and confirmed its advantages. The conclusion of this work is that having a formal methodology for archetype development facilitates the definition and adoption of interoperable archetypes, improves their quality, and facilitates their reuse among different information systems and EHR projects. Moreover, the proposed methodology can be also a reference for CIMs development using any other formalism. Copyright © 2018 Elsevier Inc. All rights reserved.

  1. Menopause and Methodological Doubt

    Science.gov (United States)

    Spence, Sheila

    2005-01-01

    Menopause and methodological doubt begins by making a tongue-in-cheek comparison between Descartes' methodological doubt and the self-doubt that can arise around menopause. A hermeneutic approach is taken in which Cartesian dualism and its implications for the way women are viewed in society are examined, both through the experiences of women…

  2. VEM: Virtual Enterprise Methodology

    DEFF Research Database (Denmark)

    Tølle, Martin; Vesterager, Johan

    2003-01-01

    This chapter presents a virtual enterprise methodology (VEM) that outlines activities to consider when setting up and managing virtual enterprises (VEs). As a methodology the VEM helps companies to ask the right questions when preparing for and setting up an enterprise network, which works...

  3. Data Centric Development Methodology

    Science.gov (United States)

    Khoury, Fadi E.

    2012-01-01

    Data centric applications, an important effort of software development in large organizations, have been mostly adopting a software methodology, such as a waterfall or Rational Unified Process, as the framework for its development. These methodologies could work on structural, procedural, or object oriented based applications, but fails to capture…

  4. The Methodology of Magpies

    Science.gov (United States)

    Carter, Susan

    2014-01-01

    Arts/Humanities researchers frequently do not explain methodology overtly; instead, they "perform" it through their use of language, textual and historic cross-reference, and theory. Here, methodologies from literary studies are shown to add to Higher Education (HE) an exegetical and critically pluralist approach. This includes…

  5. Design Methodology - Design Synthesis

    DEFF Research Database (Denmark)

    Andreasen, Mogens Myrup

    2003-01-01

    Design Methodology is part of our practice and our knowledge about designing, and it has been strongly supported by the establishing and work of a design research community. The aim of this article is to broaden the reader¿s view of designing and Design Methodology. This is done by sketching...... the development of Design Methodology through time and sketching some important approaches and methods. The development is mainly forced by changing industrial condition, by the growth of IT support for designing, but also by the growth of insight into designing created by design researchers.......ABSTRACT Design Methodology shall be seen as our understanding of how to design; it is an early (emerging late 60ies) and original articulation of teachable and learnable methodics. The insight is based upon two sources: the nature of the designed artefacts and the nature of human designing. Today...

  6. GPS system simulation methodology

    Science.gov (United States)

    Ewing, Thomas F.

    1993-01-01

    The following topics are presented: background; Global Positioning System (GPS) methodology overview; the graphical user interface (GUI); current models; application to space nuclear power/propulsion; and interfacing requirements. The discussion is presented in vugraph form.

  7. Hazard classification methodology

    International Nuclear Information System (INIS)

    Brereton, S.J.

    1996-01-01

    This document outlines the hazard classification methodology used to determine the hazard classification of the NIF LTAB, OAB, and the support facilities on the basis of radionuclides and chemicals. The hazard classification determines the safety analysis requirements for a facility

  8. Nonlinear Image Denoising Methodologies

    National Research Council Canada - National Science Library

    Yufang, Bao

    2002-01-01

    In this thesis, we propose a theoretical as well as practical framework to combine geometric prior information to a statistical/probabilistic methodology in the investigation of a denoising problem...

  9. Clinical trial methodology

    National Research Council Canada - National Science Library

    Peace, Karl E; Chen, Ding-Geng

    2011-01-01

    "Now viewed as its own scientific discipline, clinical trial methodology encompasses the methods required for the protection of participants in a clinical trial and the methods necessary to provide...

  10. Methodology of sustainability accounting

    Directory of Open Access Journals (Sweden)

    O.H. Sokil

    2017-03-01

    Full Text Available Modern challenges of the theory and methodology of accounting are realized through the formation and implementation of new concepts, the purpose of which is to meet the needs of users in standard and unique information. The development of a methodology for sustainability accounting is a key aspect of the management of an economic entity. The purpose of the article is to form the methodological bases of accounting for sustainable development and determine its goals, objectives, object, subject, methods, functions and key aspects. The author analyzes the theoretical bases of the definition and considers the components of the traditional accounting methodology. Generalized structural diagram of the methodology for accounting for sustainable development is offered in the article. The complex of methods and principles of sustainable development accounting for systematized and non-standard provisions has been systematized. The new system of theoretical and methodological provisions of accounting for sustainable development is justified in the context of determining its purpose, objective, subject, object, methods, functions and key aspects.

  11. Regional Shelter Analysis Methodology

    Energy Technology Data Exchange (ETDEWEB)

    Dillon, Michael B. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Dennison, Deborah [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Kane, Jave [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Walker, Hoyt [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Miller, Paul [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2015-08-01

    The fallout from a nuclear explosion has the potential to injure or kill 100,000 or more people through exposure to external gamma (fallout) radiation. Existing buildings can reduce radiation exposure by placing material between fallout particles and exposed people. Lawrence Livermore National Laboratory was tasked with developing an operationally feasible methodology that could improve fallout casualty estimates. The methodology, called a Regional Shelter Analysis, combines the fallout protection that existing buildings provide civilian populations with the distribution of people in various locations. The Regional Shelter Analysis method allows the consideration of (a) multiple building types and locations within buildings, (b) country specific estimates, (c) population posture (e.g., unwarned vs. minimally warned), and (d) the time of day (e.g., night vs. day). The protection estimates can be combined with fallout predictions (or measurements) to (a) provide a more accurate assessment of exposure and injury and (b) evaluate the effectiveness of various casualty mitigation strategies. This report describes the Regional Shelter Analysis methodology, highlights key operational aspects (including demonstrating that the methodology is compatible with current tools), illustrates how to implement the methodology, and provides suggestions for future work.

  12. The policy trail methodology

    DEFF Research Database (Denmark)

    Holford, John; Larson, Anne; Melo, Susana

    of ‘policy trail’, arguing that it can overcome ‘methodological nationalism’ and link structure and agency in research on the ‘European educational space’. The ‘trail’ metaphor, she suggests, captures the intentionality and the erratic character of policy. The trail connects sites and brings about change......, but – although policy may be intended to be linear, with specific outcomes – policy often has to bend, and sometimes meets insurmountable obstacles. This symposium outlines and develops the methodology, but also reports on research undertaken within a major FP7 project (LLLIght’in’Europe, 2012-15) which made use......In recent years, the “policy trail” has been proposed as a methodology appropriate to the shifting and fluid governance of lifelong learning in the late modern world (Holford et al. 2013, Holford et al. 2013, Cort 2014). The contemporary environment is marked by multi-level governance (global...

  13. Changing methodologies in TESOL

    CERN Document Server

    Spiro, Jane

    2013-01-01

    Covering core topics from vocabulary and grammar to teaching, writing speaking and listening, this textbook shows you how to link research to practice in TESOL methodology. It emphasises how current understandings have impacted on the language classroom worldwide and investigates the meaning of 'methods' and 'methodology' and the importance of these for the teacher: as well as the underlying assumptions and beliefs teachers bring to bear in their practice. By introducing you to language teaching approaches, you will explore the way these are influenced by developments in our understanding of l

  14. Creativity in phenomenological methodology

    DEFF Research Database (Denmark)

    Dreyer, Pia; Martinsen, Bente; Norlyk, Annelise

    2014-01-01

    on the methodologies of van Manen, Dahlberg, Lindseth & Norberg, the aim of this paper is to argue that the increased focus on creativity and arts in research methodology is valuable to gain a deeper insight into lived experiences. We illustrate this point through examples from empirical nursing studies, and discuss......Nursing research is often concerned with lived experiences in human life using phenomenological and hermeneutic approaches. These empirical studies may use different creative expressions and art-forms to describe and enhance an embodied and personalised understanding of lived experiences. Drawing...... may support a respectful renewal of phenomenological research traditions in nursing research....

  15. Computer Network Operations Methodology

    Science.gov (United States)

    2004-03-01

    means of their computer information systems. Disrupt - This type of attack focuses on disrupting as “attackers might surreptitiously reprogram enemy...by reprogramming the computers that control distribution within the power grid. A disruption attack introduces disorder and inhibits the effective...between commanders. The use of methodologies is widespread and done subconsciously to assist individuals in decision making. The processes that

  16. SCI Hazard Report Methodology

    Science.gov (United States)

    Mitchell, Michael S.

    2010-01-01

    This slide presentation reviews the methodology in creating a Source Control Item (SCI) Hazard Report (HR). The SCI HR provides a system safety risk assessment for the following Ares I Upper Stage Production Contract (USPC) components (1) Pyro Separation Systems (2) Main Propulsion System (3) Reaction and Roll Control Systems (4) Thrust Vector Control System and (5) Ullage Settling Motor System components.

  17. A Functional HAZOP Methodology

    DEFF Research Database (Denmark)

    Liin, Netta; Lind, Morten; Jensen, Niels

    2010-01-01

    A HAZOP methodology is presented where a functional plant model assists in a goal oriented decomposition of the plant purpose into the means of achieving the purpose. This approach leads to nodes with simple functions from which the selection of process and deviation variables follow directly...

  18. Complicating Methodological Transparency

    Science.gov (United States)

    Bridges-Rhoads, Sarah; Van Cleave, Jessica; Hughes, Hilary E.

    2016-01-01

    A historical indicator of the quality, validity, and rigor of qualitative research has been the documentation and disclosure of the behind-the-scenes work of the researcher. In this paper, we use what we call "methodological data" as a tool to complicate the possibility and desirability of such transparency. Specifically, we draw on our…

  19. Methodological Advances in Dea

    NARCIS (Netherlands)

    L. Cherchye (Laurens); G.T. Post (Thierry)

    2001-01-01

    textabstractWe survey the methodological advances in DEA over the last 25 years and discuss the necessary conditions for a sound empirical application. We hope this survey will contribute to the further dissemination of DEA, the knowledge of its relative strengths and weaknesses, and the tools

  20. NUSAM Methodology for Assessment.

    Energy Technology Data Exchange (ETDEWEB)

    Leach, Janice [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Snell, Mark K. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2016-07-01

    This document provides a methodology for the performance-based assessment of security systems designed for the protection of nuclear and radiological materials and the processes that produce and/or involve them. It is intended for use with both relatively simple installations and with highly regulated complex sites with demanding security requirements.

  1. MIRD methodology. Part 1

    International Nuclear Information System (INIS)

    Rojo, Ana M.

    2004-01-01

    This lecture develops the MIRD (Medical Internal Radiation Dose) methodology for the evaluation of the internal dose due to the administration of radiopharmaceuticals. In this first part, the basic concepts and the main equations are presented. The ICRP Dosimetric System is also explained. (author)

  2. Response Surface Methodology

    NARCIS (Netherlands)

    Kleijnen, Jack P.C.

    2014-01-01

    Abstract: This chapter first summarizes Response Surface Methodology (RSM), which started with Box and Wilson’s article in 1951 on RSM for real, non-simulated systems. RSM is a stepwise heuristic that uses first-order polynomials to approximate the response surface locally. An estimated polynomial

  3. MIRD methodology. Part 2

    International Nuclear Information System (INIS)

    Gomez Parada, Ines

    2004-01-01

    This paper develops the MIRD (Medical Internal Radiation Dose) methodology for the evaluation of the internal dose due to the administration of radiopharmaceuticals. In this second part, different methods for the calculation of the accumulated activity are presented, together with the effective half life definition. Different forms of Retention Activity curves are also shown. (author)

  4. Soft Systems Methodology

    Science.gov (United States)

    Checkland, Peter; Poulter, John

    Soft systems methodology (SSM) is an approach for tackling problematical, messy situations of all kinds. It is an action-oriented process of inquiry into problematic situations in which users learn their way from finding out about the situation, to taking action to improve it. The learning emerges via an organised process in which the situation is explored using a set of models of purposeful action (each built to encapsulate a single worldview) as intellectual devices, or tools, to inform and structure discussion about a situation and how it might be improved. This paper, written by the original developer Peter Checkland and practitioner John Poulter, gives a clear and concise account of the approach that covers SSM's specific techniques, the learning cycle process of the methodology and the craft skills which practitioners develop. This concise but theoretically robust account nevertheless includes the fundamental concepts, techniques, core tenets described through a wide range of settings.

  5. Transparent Guideline Methodology Needed

    DEFF Research Database (Denmark)

    Lidal, Ingeborg; Norén, Camilla; Mäkelä, Marjukka

    2013-01-01

    As part of learning at the Nordic Workshop of Evidence-based Medicine, we have read with interest the practice guidelines for central venous access, published in your Journal in 2012.1 We appraised the quality of this guideline using the checklist developed by The Evidence-Based Medicine Working ...... are based on best currently available evidence. Our concerns are in two main categories: the rigor of development, including methodology of searching, evaluating, and combining the evidence; and editorial independence, including funding and possible conflicts of interest....... Group.2 Similar criteria for guideline quality have been suggested elsewhere.3 Our conclusion was that this much needed guideline is currently unclear about several aspects of the methodology used in developing the recommendations. This means potential users cannot be certain that the recommendations...

  6. Web survey methodology

    CERN Document Server

    Callegaro, Mario; Vehovar, Asja

    2015-01-01

    Web Survey Methodology guides the reader through the past fifteen years of research in web survey methodology. It both provides practical guidance on the latest techniques for collecting valid and reliable data and offers a comprehensive overview of research issues. Core topics from preparation to questionnaire design, recruitment testing to analysis and survey software are all covered in a systematic and insightful way. The reader will be exposed to key concepts and key findings in the literature, covering measurement, non-response, adjustments, paradata, and cost issues. The book also discusses the hottest research topics in survey research today, such as internet panels, virtual interviewing, mobile surveys and the integration with passive measurements, e-social sciences, mixed modes and business intelligence. The book is intended for students, practitioners, and researchers in fields such as survey and market research, psychological research, official statistics and customer satisfaction research.

  7. Steganography: LSB Methodology

    Science.gov (United States)

    2012-08-02

    of LSB steganography in grayscale and color images . In J. Dittmann, K. Nahrstedt, and P. Wohlmacher, editors, Proceedings of the ACM, Special...Fridrich, M. Gojan and R. Du paper titled “Reliable detection of LSB steganography in grayscale and color images ”. From a general perspective Figure 2...REPORT Steganography : LSB Methodology (Progress Report) 14. ABSTRACT 16. SECURITY CLASSIFICATION OF: In computer science, steganography is the science

  8. Soil Radiological Characterisation Methodology

    International Nuclear Information System (INIS)

    Attiogbe, Julien; Aubonnet, Emilie; De Maquille, Laurence; De Moura, Patrick; Desnoyers, Yvon; Dubot, Didier; Feret, Bruno; Fichet, Pascal; Granier, Guy; Iooss, Bertrand; Nokhamzon, Jean-Guy; Ollivier Dehaye, Catherine; Pillette-Cousin, Lucien; Savary, Alain

    2014-12-01

    This report presents the general methodology and best practice approaches which combine proven existing techniques for sampling and characterisation to assess the contamination of soils prior to remediation. It is based on feedback of projects conducted by main French nuclear stakeholders involved in the field of remediation and dismantling (EDF, CEA, AREVA and IRSN). The application of this methodology will enable the project managers to obtain the elements necessary for the drawing up of files associated with remediation operations, as required by the regulatory authorities. It is applicable to each of the steps necessary for the piloting of remediation work-sites, depending on the objectives targeted (release into the public domain, re-use, etc.). The main part describes the applied statistical methodology with the exploratory analysis and variogram data, identification of singular points and their location. The results obtained permit assessment of a mapping to identify the contaminated surface and subsurface areas. It stakes the way for radiological site characterisation since the initial investigations from historical and functional analysis to check that the remediation objectives have been met. It follows an example application from the feedback of the remediation of a contaminated site on the Fontenay aux Roses facility. It is supplemented by a glossary of main terms used in the field from different publications or international standards. This technical report is a support of the ISO Standard ISO ISO/TC 85/SC 5 N 18557 'Sampling and characterisation principles for soils, buildings and infrastructures contaminated by radionuclides for remediation purposes'. (authors) [fr

  9. Methodology applied to develop the DHIE: applied methodology

    CSIR Research Space (South Africa)

    Herselman, Marlien

    2016-12-01

    Full Text Available This section will address the methodology that was applied to develop the South African Digital Health Innovation Ecosystem (DHIE). Each chapter under Section B represents a specific phase in the methodology....

  10. Case Study Research Methodology

    Directory of Open Access Journals (Sweden)

    Mark Widdowson

    2011-01-01

    Full Text Available Commenting on the lack of case studies published in modern psychotherapy publications, the author reviews the strengths of case study methodology and responds to common criticisms, before providing a summary of types of case studies including clinical, experimental and naturalistic. Suggestions are included for developing systematic case studies and brief descriptions are given of a range of research resources relating to outcome and process measures. Examples of a pragmatic case study design and a hermeneutic single-case efficacy design are given and the paper concludes with some ethical considerations and an exhortation to the TA community to engage more widely in case study research.

  11. Sample size methodology

    CERN Document Server

    Desu, M M

    2012-01-01

    One of the most important problems in designing an experiment or a survey is sample size determination and this book presents the currently available methodology. It includes both random sampling from standard probability distributions and from finite populations. Also discussed is sample size determination for estimating parameters in a Bayesian setting by considering the posterior distribution of the parameter and specifying the necessary requirements. The determination of the sample size is considered for ranking and selection problems as well as for the design of clinical trials. Appropria

  12. Geotechnical site assessment methodology

    International Nuclear Information System (INIS)

    Tunbridge, L.W.; Richards, L.R.

    1985-09-01

    The reports comprising this volume concern the research conducted on geotechnical site assessment methodology at the Carwynnen test mine in granites in Cornwall, with particular reference to the effect of structures imposed by discontinuities on the engineering behaviour of rock masses. The topics covered are: in-situ stress measurements using (a) the hydraulic fracturing method, or (b) the US Bureau of Mines deformation probe; scanline discontinuity survey - coding form and instructions, and data; applicability of geostatistical estimation methods to scalar rock properties; comments on in-situ stress at the Carwynnen test mine and the state of stress in the British Isles. (U.K.)

  13. Microphysics evolution and methodology

    International Nuclear Information System (INIS)

    Dionisio, J.S.

    1990-01-01

    A few general features of microscopics evolution and their relationship with microscopics methodology are briefly surveyed. Several pluri-disciplinary and interdisciplinary aspects of microscopics research are also discussed in the present scientific context. The need for an equilibrium between individual tendencies and collective constraints required by team work, already formulated thirty years ago by Frederic Joliot, is particularly stressed in the present conjuncture of Nuclear Research favouring very large team projects and discouraging individual initiatives. The increasing importance of the science of science (due to their multiple social, economical, ecological aspects) and the stronger competition between national and international tendencies of scientific (and technical) cooperation are also discussed. (author)

  14. MIRD methodology; Metodologia MIRD

    Energy Technology Data Exchange (ETDEWEB)

    Rojo, Ana M [Autoridad Regulatoria Nuclear, Buenos Aires (Argentina); Gomez Parada, Ines [Sociedad Argentina de Radioproteccion, Buenos Aires (Argentina)

    2004-07-01

    The MIRD (Medical Internal Radiation Dose) system was established by the Society of Nuclear Medicine of USA in 1960 to assist the medical community in the estimation of the dose in organs and tissues due to the incorporation of radioactive materials. Since then, 'MIRD Dose Estimate Report' (from the 1 to 12) and 'Pamphlets', of great utility for the dose calculations, were published. The MIRD system was planned essentially for the calculation of doses received by the patients during nuclear medicine diagnostic procedures. The MIRD methodology for the absorbed doses calculations in different tissues is explained.

  15. Beam optimization: improving methodology

    International Nuclear Information System (INIS)

    Quinteiro, Guillermo F.

    2004-01-01

    Different optimization techniques commonly used in biology and food technology allow a systematic and complete analysis of response functions. In spite of the great interest in medical and nuclear physics in the problem of optimizing mixed beams, little attention has been given to sophisticate mathematical tools. Indeed, many techniques are perfectly suited to the typical problem of beam optimization. This article is intended as a guide to the use of two methods, namely Response Surface Methodology and Simplex, that are expected to fasten the optimization process and, meanwhile give more insight into the relationships among the dependent variables controlling the response

  16. Literacy research methodologies

    CERN Document Server

    Duke, Nell K

    2012-01-01

    The definitive reference on literacy research methods, this book serves as a key resource for researchers and as a text in graduate-level courses. Distinguished scholars clearly describe established and emerging methodologies, discuss the types of questions and claims for which each is best suited, identify standards of quality, and present exemplary studies that illustrate the approaches at their best. The book demonstrates how each mode of inquiry can yield unique insights into literacy learning and teaching and how the methods can work together to move the field forward.   New to This Editi

  17. Methodology of site studies

    International Nuclear Information System (INIS)

    Caries, J.C.; Hugon, J.; Grauby, A.

    1980-01-01

    This methodology consists in an essentially dynamic, estimated and follow-up analysis of the impact of discharges on all the environment compartments, whether natural or not, that play a part in the protection of man and his environment. It applies at two levels, to wit: the choice of site, or the detailed study of the site selected. Two examples of its application will be developed, namely: at the choice of site level in the case of marine sites, and of the detailed study level of the chosen site in that of a riverside site [fr

  18. Alternative pricing methodologies

    International Nuclear Information System (INIS)

    Anon.

    1991-01-01

    With the increased interest in competitive market forces and growing recognition of the deficiencies in current practices, FERC and others are exploring alternatives to embedded cost pricing. A number of these alternatives are discussed in this chapter. Marketplace pricing, discussed briefly here, is the subject of the next chapter. Obviously, the pricing formula may combine several of these methodologies. One utility of which the authors are aware is seeking a price equal to the sum of embedded costs, opportunity costs, line losses, value of service, FERC's percentage adder formula and a contract service charge

  19. LOFT uncertainty-analysis methodology

    International Nuclear Information System (INIS)

    Lassahn, G.D.

    1983-01-01

    The methodology used for uncertainty analyses of measurements in the Loss-of-Fluid Test (LOFT) nuclear-reactor-safety research program is described and compared with other methodologies established for performing uncertainty analyses

  20. LOFT uncertainty-analysis methodology

    International Nuclear Information System (INIS)

    Lassahn, G.D.

    1983-01-01

    The methodology used for uncertainty analyses of measurements in the Loss-of-Fluid Test (LOFT) nuclear reactor safety research program is described and compared with other methodologies established for performing uncertainty analyses

  1. RHIC Data Correlation Methodology

    International Nuclear Information System (INIS)

    Michnoff, R.; D'Ottavio, T.; Hoff, L.; MacKay, W.; Satogata, T.

    1999-01-01

    A requirement for RHIC data plotting software and physics analysis is the correlation of data from all accelerator data gathering systems. Data correlation provides the capability for a user to request a plot of multiple data channels vs. time, and to make meaningful time-correlated data comparisons. The task of data correlation for RHIC requires careful consideration because data acquisition triggers are generated from various asynchronous sources including events from the RHIC Event Link, events from the two Beam Sync Links, and other unrelated clocks. In order to correlate data from asynchronous acquisition systems a common time reference is required. The RHIC data correlation methodology will allow all RHIC data to be converted to a common wall clock time, while still preserving native acquisition trigger information. A data correlation task force team, composed of the authors of this paper, has been formed to develop data correlation design details and provide guidelines for software developers. The overall data correlation methodology will be presented in this paper

  2. Intelligent systems engineering methodology

    Science.gov (United States)

    Fouse, Scott

    1990-01-01

    An added challenge for the designers of large scale systems such as Space Station Freedom is the appropriate incorporation of intelligent system technology (artificial intelligence, expert systems, knowledge-based systems, etc.) into their requirements and design. This presentation will describe a view of systems engineering which successfully addresses several aspects of this complex problem: design of large scale systems, design with requirements that are so complex they only completely unfold during the development of a baseline system and even then continue to evolve throughout the system's life cycle, design that involves the incorporation of new technologies, and design and development that takes place with many players in a distributed manner yet can be easily integrated to meet a single view of the requirements. The first generation of this methodology was developed and evolved jointly by ISX and the Lockheed Aeronautical Systems Company over the past five years on the Defense Advanced Research Projects Agency/Air Force Pilot's Associate Program, one of the largest, most complex, and most successful intelligent systems constructed to date. As the methodology has evolved it has also been applied successfully to a number of other projects. Some of the lessons learned from this experience may be applicable to Freedom.

  3. SMART performance analysis methodology

    International Nuclear Information System (INIS)

    Lim, H. S.; Kim, H. C.; Lee, D. J.

    2001-04-01

    To ensure the required and desired operation over the plant lifetime, the performance analysis for the SMART NSSS design is done by means of the specified analysis methodologies for the performance related design basis events(PRDBE). The PRDBE is an occurrence(event) that shall be accommodated in the design of the plant and whose consequence would be no more severe than normal service effects of the plant equipment. The performance analysis methodology which systematizes the methods and procedures to analyze the PRDBEs is as follows. Based on the operation mode suitable to the characteristics of the SMART NSSS, the corresponding PRDBEs and allowable range of process parameters for these events are deduced. With the developed control logic for each operation mode, the system thermalhydraulics are analyzed for the chosen PRDBEs using the system analysis code. Particularly, because of different system characteristics of SMART from the existing commercial nuclear power plants, the operation mode, PRDBEs, control logic, and analysis code should be consistent with the SMART design. This report presents the categories of the PRDBEs chosen based on each operation mode and the transition among these and the acceptance criteria for each PRDBE. It also includes the analysis methods and procedures for each PRDBE and the concept of the control logic for each operation mode. Therefore this report in which the overall details for SMART performance analysis are specified based on the current SMART design, would be utilized as a guide for the detailed performance analysis

  4. Relative Hazard Calculation Methodology

    International Nuclear Information System (INIS)

    DL Strenge; MK White; RD Stenner; WB Andrews

    1999-01-01

    The methodology presented in this document was developed to provide a means of calculating the RH ratios to use in developing useful graphic illustrations. The RH equation, as presented in this methodology, is primarily a collection of key factors relevant to understanding the hazards and risks associated with projected risk management activities. The RH equation has the potential for much broader application than generating risk profiles. For example, it can be used to compare one risk management activity with another, instead of just comparing it to a fixed baseline as was done for the risk profiles. If the appropriate source term data are available, it could be used in its non-ratio form to estimate absolute values of the associated hazards. These estimated values of hazard could then be examined to help understand which risk management activities are addressing the higher hazard conditions at a site. Graphics could be generated from these absolute hazard values to compare high-hazard conditions. If the RH equation is used in this manner, care must be taken to specifically define and qualify the estimated absolute hazard values (e.g., identify which factors were considered and which ones tended to drive the hazard estimation)

  5. Insights into PRA methodologies

    International Nuclear Information System (INIS)

    Gallagher, D.; Lofgren, E.; Atefi, B.; Liner, R.; Blond, R.; Amico, P.

    1984-08-01

    Probabilistic Risk Assessments (PRAs) for six nuclear power plants were examined to gain insight into how the choice of analytical methods can affect the results of PRAs. The PRA sreflectope considered was limited to internally initiated accidents sequences through core melt. For twenty methodological topic areas, a baseline or minimal methodology was specified. The choice of methods for each topic in the six PRAs was characterized in terms of the incremental level of effort above the baseline. A higher level of effort generally reflects a higher level of detail or a higher degree of sophistication in the analytical approach to a particular topic area. The impact on results was measured in terms of how additional effort beyond the baseline level changed the relative importance and ordering of dominant accident sequences compared to what would have been observed had methods corresponding to the baseline level of effort been employed. This measure of impact is a more useful indicator of how methods affect perceptions of plant vulnerabilities than changes in core melt frequency would be. However, the change in core melt frequency was used as a secondary measure of impact for nine topics where availability of information permitted. Results are presented primarily in the form of effort-impact matrices for each of the twenty topic areas. A suggested effort-impact profile for future PRAs is presented

  6. Scrum methodology in banking environment

    OpenAIRE

    Strihová, Barbora

    2015-01-01

    Bachelor thesis "Scrum methodology in banking environment" is focused on one of agile methodologies called Scrum and description of the methodology used in banking environment. Its main goal is to introduce the Scrum methodology and outline a real project placed in a bank focused on software development through a case study, address problems of the project, propose solutions of the addressed problems and identify anomalies of Scrum in software development constrained by the banking environmen...

  7. Experimental Economics: Some Methodological Notes

    OpenAIRE

    Fiore, Annamaria

    2009-01-01

    The aim of this work is presenting in a self-contained paper some methodological aspects as they are received in the current experimental literature. The purpose has been to make a critical review of some very influential papers dealing with methodological issues. In other words, the idea is to have a single paper where people first approaching experimental economics can find summarised (some) of the most important methodological issues. In particular, the focus is on some methodological prac...

  8. In-bead screening

    DEFF Research Database (Denmark)

    2013-01-01

    The present invention relates to screening of one-bead-one-compound (OBOC) combinatorial libraries which is useful for the discovery of compounds displaying molecular interactions with a biological or a physicochemical system, such as substrates and inhibitors of enzymes and the like. The invention...... provides a method for screening a library of compounds for their interaction with a physico- chemical or biological system and a corresponding kit for performing the method of screening a one-bead-one-compound library of compounds....

  9. Geotechnical site assessment methodology

    International Nuclear Information System (INIS)

    Tunbridge, L.W.; Richards, L.R.

    1985-09-01

    A final report summarizing the research conducted on geotechnical site assessment methodology at the Carwynnen test mine in Cornwall. The geological setting of the test site in the Cornubian granite batholith is described. The effect of structure imposed by discontinuities on the engineering behaviour of rock masses is discussed and the scanline survey method of obtaining data on discontinuities in the rock mass is described. The applicability of some methods of statistical analysis for discontinuity data is reviewed. The requirement for remote geophysical methods of characterizing the mass is discussed and experiments using seismic and ultrasonic velocity measurements are reported. Methods of determining the in-situ stresses are described and the final results of a programme of in-situ stress measurements using the overcoring and hydrofracture methods are reported. (author)

  10. UNCOMMON SENSORY METHODOLOGIES

    Directory of Open Access Journals (Sweden)

    Vladimír Vietoris

    2015-02-01

    Full Text Available Sensory science is the young but the rapidly developing field of the food industry. Actually, the great emphasis is given to the production of rapid techniques of data collection, the difference between consumers and trained panel is obscured and the role of sensory methodologists is to prepare the ways for evaluation, by which a lay panel (consumers can achieve identical results as a trained panel. Currently, there are several conventional methods of sensory evaluation of food (ISO standards, but more sensory laboratories are developing methodologies that are not strict enough in the selection of evaluators, their mechanism is easily understandable and the results are easily interpretable. This paper deals with mapping of marginal methods used in sensory evaluation of food (new types of profiles, CATA, TDS, napping.

  11. Safety class methodology

    International Nuclear Information System (INIS)

    Donner, E.B.; Low, J.M.; Lux, C.R.

    1992-01-01

    DOE Order 6430.1A, General Design Criteria (GDC), requires that DOE facilities be evaluated with respect to ''safety class items.'' Although the GDC defines safety class items, it does not provide a methodology for selecting safety class items. The methodology described in this paper was developed to assure that Safety Class Items at the Savannah River Site (SRS) are selected in a consistent and technically defensible manner. Safety class items are those in the highest of four categories determined to be of special importance to nuclear safety and, merit appropriately higher-quality design, fabrication, and industrial test standards and codes. The identification of safety class items is approached using a cascading strategy that begins at the 'safety function' level (i.e., a cooling function, ventilation function, etc.) and proceeds down to the system, component, or structure level. Thus, the items that are required to support a safety function are SCls. The basic steps in this procedure apply to the determination of SCls for both new project activities, and for operating facilities. The GDC lists six characteristics of SCls to be considered as a starting point for safety item classification. They are as follows: 1. Those items whose failure would produce exposure consequences that would exceed the guidelines in Section 1300-1.4, ''Guidance on Limiting Exposure of the Public,'' at the site boundary or nearest point of public access 2. Those items required to maintain operating parameters within the safety limits specified in the Operational Safety Requirements during normal operations and anticipated operational occurrences. 3. Those items required for nuclear criticality safety. 4. Those items required to monitor the release of radioactive material to the environment during and after a Design Basis Accident. Those items required to achieve, and maintain the facility in a safe shutdown condition 6. Those items that control Safety Class Item listed above

  12. Situating methodology within qualitative research.

    Science.gov (United States)

    Kramer-Kile, Marnie L

    2012-01-01

    Qualitative nurse researchers are required to make deliberate and sometimes complex methodological decisions about their work. Methodology in qualitative research is a comprehensive approach in which theory (ideas) and method (doing) are brought into close alignment. It can be difficult, at times, to understand the concept of methodology. The purpose of this research column is to: (1) define qualitative methodology; (2) illuminate the relationship between epistemology, ontology and methodology; (3) explicate the connection between theory and method in qualitative research design; and 4) highlight relevant examples of methodological decisions made within cardiovascular nursing research. Although there is no "one set way" to do qualitative research, all qualitative researchers should account for the choices they make throughout the research process and articulate their methodological decision-making along the way.

  13. Methodological Problems of Nanotechnoscience

    Science.gov (United States)

    Gorokhov, V. G.

    Recently, we have reported on the definitions of nanotechnology as a new type of NanoTechnoScience and on the nanotheory as a cluster of the different natural and engineering theories. Nanotechnology is not only a new type of scientific-engineering discipline, but it evolves also in a “nonclassical” way. Nanoontology or nano scientific world view has a function of the methodological orientation for the choice the theoretical means and methods toward a solution to the scientific and engineering problems. This allows to change from one explanation and scientific world view to another without any problems. Thus, nanotechnology is both a field of scientific knowledge and a sphere of engineering activity, in other words, NanoTechnoScience is similar to Systems Engineering as the analysis and design of large-scale, complex, man/machine systems but micro- and nanosystems. Nano systems engineering as well as Macro systems engineering includes not only systems design but also complex research. Design orientation has influence on the change of the priorities in the complex research and of the relation to the knowledge, not only to “the knowledge about something”, but also to the knowledge as the means of activity: from the beginning control and restructuring of matter at the nano-scale is a necessary element of nanoscience.

  14. Methodological themes and variations

    International Nuclear Information System (INIS)

    Tetlock, P.E.

    1989-01-01

    This paper reports on the tangible progress that has been made in clarifying the underlying processes that affect both the likelihood of war in general and of nuclear war in particular. It also illustrates how difficult it is to make progress in this area. Nonetheless, what has been achieved should not be minimized. We have learned a good deal on both the theoretical and the methodological fronts and, perhaps, most important, we have learned a good deal about the limits of our knowledge. Knowledge of our ignorance---especially in a policy domain where confident, even glib, causal assertions are so common---can be a major contribution in itself. The most important service the behavioral and social sciences can currently provide to the policy making community may well be to make thoughtful skepticism respectable: to sensitize those who make key decisions to the uncertainty surrounding our understanding of international conflict and to the numerous qualifications that now need to be attached to simple causal theories concerning the origins of war

  15. Engineering radioecology: Methodological considerations

    International Nuclear Information System (INIS)

    Nechaev, A.F.; Projaev, V.V.; Sobolev, I.A.; Dmitriev, S.A.

    1995-01-01

    The term ''radioecology'' has been widely recognized in scientific and technical societies. At the same time, this scientific school (radioecology) does not have a precise/generally acknowledged structure, unified methodical basis, fixed subjects of investigation, etc. In other words, radioecology is a vast, important but rather amorphous conglomerate of various ideas, amalgamated mostly by their involvement in biospheric effects of ionizing radiation and some conceptual stereotypes. This paradox was acceptable up to a certain time. However, with the termination of the Cold War and because of remarkable political changes in the world, it has become possible to convert the problem of environmental restoration from the scientific sphere in particularly practical terms. Already the first steps clearly showed an imperfection of existing technologies, managerial and regulatory schemes; lack of qualified specialists, relevant methods and techniques; uncertainties in methodology of decision-making, etc. Thus, building up (or maybe, structuring) of special scientific and technological basis, which the authors call ''engineering radioecology'', seems to be an important task. In this paper they endeavored to substantiate the last thesis and to suggest some preliminary ideas concerning the subject matter of engineering radioecology

  16. Dosimetric methodology of the ICRP

    International Nuclear Information System (INIS)

    Eckerman, K.F.

    1994-01-01

    Establishment of guidance for the protection of workers and members of the public from radiation exposures necessitates estimation of the radiation dose to tissues of the body at risk. The dosimetric methodology formulated by the International Commission on Radiological Protection (ICRP) is intended to be responsive to this need. While developed for radiation protection, elements of the methodology are often applied in addressing other radiation issues; e.g., risk assessment. This chapter provides an overview of the methodology, discusses its recent extension to age-dependent considerations, and illustrates specific aspects of the methodology through a number of numerical examples

  17. Transmission pricing: paradigms and methodologies

    Energy Technology Data Exchange (ETDEWEB)

    Shirmohammadi, Dariush [Pacific Gas and Electric Co., San Francisco, CA (United States); Vieira Filho, Xisto; Gorenstin, Boris [Centro de Pesquisas de Energia Eletrica (CEPEL), Rio de Janeiro, RJ (Brazil); Pereira, Mario V.P. [Power System Research, Rio de Janeiro, RJ (Brazil)

    1994-12-31

    In this paper we describe the principles of several paradigms and methodologies for pricing transmission services. The paper outlines some of the main characteristics of these paradigms and methodologies such as where they may be used for best results. Due to their popularity, power flow based MW-mile and short run marginal cost pricing methodologies will be covered in some detail. We conclude the paper with examples of the application of these two pricing methodologies for pricing transmission services in Brazil. (author) 25 refs., 2 tabs.

  18. Analytical methodology for nuclear safeguards

    International Nuclear Information System (INIS)

    Ramakumar, K.L.

    2011-01-01

    This paper attempts to briefly describe the analytical methodologies available and also highlight some of the challenges, expectations from nuclear material accounting and control (NUMAC) point of view

  19. Country report: a methodology

    International Nuclear Information System (INIS)

    Colin, A.

    2013-01-01

    This paper describes a methodology which could be applicable to establish a country report. In the framework of nuclear non proliferation appraisal and IAEA safeguards implementation, it is important to be able to assess the potential existence of undeclared nuclear materials and activities as undeclared facilities in the country under review. In our views a country report should aim at providing detailed information on nuclear related activities for each country examined taken 'as a whole' such as nuclear development, scientific and technical capabilities, etc. In order to study a specific country, we need to know if there is already an operating nuclear civil programme or not. In the first case, we have to check carefully if it could divert nuclear material, if there are misused declared facilities or if they operate undeclared facilities and conduct undeclared activities aiming at manufacturing nuclear weapon. In the second case, we should pay attention to the development of a nuclear civil project. A country report is based on a wide span of information (most of the time coming from open sources but sometimes coming also from confidential or private ones). Therefore, it is important to carefully check the nature and the credibility (reliability?) of these sources through cross-check examination. Eventually, it is necessary to merge information from different sources and apply an expertise filter. We have at our disposal a lot of performing tools to help us to assess, understand and evaluate the situation (cartography, imagery, bibliometry, etc.). These tools allow us to offer the best conclusions as far as possible. The paper is followed by the slides of the presentation. (author)

  20. Microbiological Methodology in Astrobiology

    Science.gov (United States)

    Abyzov, S. S.; Gerasimenko, L. M.; Hoover, R. B.; Mitskevich, I. N.; Mulyukin, A. L.; Poglazova, M. N.; Rozanov, A. Y.

    2005-01-01

    Searching for life in astromaterials to be delivered from the future missions to extraterrestrial bodies is undoubtedly related to studies of the properties and signatures of living microbial cells and microfossils on Earth. As model terrestrial analogs of Martian polar subsurface layers are often regarded the Antarctic glacier and Earth permafrost habitats where alive microbial cells preserved viability for millennia years due to entering the anabiotic state. For the future findings of viable microorganisms in samples from extraterrestrial objects, it is important to use a combined methodology that includes classical microbiological methods, plating onto nutrient media, direct epifluorescence and electron microscopy examinations, detection of the elemental composition of cells, radiolabeling techniques, PCR and FISH methods. Of great importance is to ensure authenticity of microorganisms (if any in studied samples) and to standardize the protocols used to minimize a risk of external contamination. Although the convincing evidence of extraterrestrial microbial life will may come from the discovery of living cells in astromaterials, biomorphs and microfossils must also be regarded as a target in search of life evidence bearing in mind a scenario that alive microorganisms had not be preserved and underwent mineralization. Under the laboratory conditions, processes that accompanied fossilization of cyanobacteria were reconstructed, and artificially produced cyanobacterial stromatolites resembles by their morphological properties those found in natural Earth habitats. Regarding the vital importance of distinguishing between biogenic and abiogenic signatures and between living and fossil microorganisms in analyzed samples, it is worthwhile to use some previously developed approaches based on electron microscopy examinations and analysis of elemental composition of biomorphs in situ and comparison with the analogous data obtained for laboratory microbial cultures and

  1. Kaupapa Maori Methodology: Trusting the Methodology through Thick and Thin

    Science.gov (United States)

    Hiha, Anne Aroha

    2016-01-01

    Kaupapa Maori is thoroughly theorised in academia in Aotearoa and those wishing to use it as their research methodology can find support through the writing of a number of Maori academics. What is not so well articulated, is the experiential voice of those who have used Kaupapa Maori as research methodology. My identity as a Maori woman…

  2. A methodology for social experimentation

    DEFF Research Database (Denmark)

    Ravn, Ib

    A methodology is outlined whereby one may improve the performance of a social system to the satisfaction of its stakeholders, that is, facilitate desirable social and organizational transformations......A methodology is outlined whereby one may improve the performance of a social system to the satisfaction of its stakeholders, that is, facilitate desirable social and organizational transformations...

  3. Workshops as a Research Methodology

    Science.gov (United States)

    Ørngreen, Rikke; Levinsen, Karin

    2017-01-01

    This paper contributes to knowledge on workshops as a research methodology, and specifically on how such workshops pertain to e-learning. A literature review illustrated that workshops are discussed according to three different perspectives: workshops as a means, workshops as practice, and workshops as a research methodology. Focusing primarily on…

  4. Methodological Pluralism and Narrative Inquiry

    Science.gov (United States)

    Michie, Michael

    2013-01-01

    This paper considers how the integral theory model of Nancy Davis and Laurie Callihan might be enacted using a different qualitative methodology, in this case the narrative methodology. The focus of narrative research is shown to be on "what meaning is being made" rather than "what is happening here" (quadrant 2 rather than…

  5. Building ASIPS the Mescal methodology

    CERN Document Server

    Gries, Matthias

    2006-01-01

    A number of system designers use ASIP's rather than ASIC's to implement their system solutions. This book gives a comprehensive methodology for the design of these application-specific instruction processors (ASIPs). It includes demonstrations of applications of the methodologies using the Tipi research framework.

  6. A methodology for software documentation

    OpenAIRE

    Torres Júnior, Roberto Dias; Ahlert, Hubert

    2000-01-01

    With the growing complexity of window based software and the use of object-oriented, the development of software is getting more complex than ever. Based on that, this article intends to present a methodology for software documentation and to analyze our experience and how this methodology can aid the software maintenance

  7. AEGIS methodology and a perspective from AEGIS methodology demonstrations

    International Nuclear Information System (INIS)

    Dove, F.H.

    1981-03-01

    Objectives of AEGIS (Assessment of Effectiveness of Geologic Isolation Systems) are to develop the capabilities needed to assess the post-closure safety of waste isolation in geologic formation; demonstrate these capabilities on reference sites; apply the assessment methodology to assist the NWTS program in site selection, waste package and repository design; and perform repository site analyses for the licensing needs of NWTS. This paper summarizes the AEGIS methodology, the experience gained from methodology demonstrations, and provides an overview in the following areas: estimation of the response of a repository to perturbing geologic and hydrologic events; estimation of the transport of radionuclides from a repository to man; and assessment of uncertainties

  8. Methodological practicalities in analytical generalization

    DEFF Research Database (Denmark)

    Halkier, Bente

    2011-01-01

    generalization. Theoretically, the argumentation in the article is based on practice theory. The main part of the article describes three different examples of ways of generalizing on the basis of the same qualitative data material. There is a particular focus on describing the methodological strategies......In this article, I argue that the existing literature on qualitative methodologies tend to discuss analytical generalization at a relatively abstract and general theoretical level. It is, however, not particularly straightforward to “translate” such abstract epistemological principles into more...... operative methodological strategies for producing analytical generalizations in research practices. Thus, the aim of the article is to contribute to the discussions among qualitatively working researchers about generalizing by way of exemplifying some of the methodological practicalities in analytical...

  9. Nanotoxicology materials, methodologies, and assessments

    CERN Document Server

    Durán, Nelson; Alves, Oswaldo L; Zucolotto, Valtencir

    2014-01-01

    This book begins with a detailed introduction to engineered nanostructures, followed by a section on methodologies used in research on cytotoxicity and genotoxicity, and concluding with evidence for the cyto- and genotoxicity of specific nanoparticles.

  10. Reflective Methodology: The Beginning Teacher

    Science.gov (United States)

    Templeton, Ronald K.; Siefert, Thomas E.

    1970-01-01

    Offers a variety of specific techniques which will help the beginning teacher to implement reflective methodology and create an inquiry-centered classroom atmosphere, at the same time meeting the many more pressing demands of first-year teaching. (JES)

  11. Methodologies used in Project Management

    OpenAIRE

    UNGUREANU, Adrian; UNGUREANU, Anca

    2014-01-01

    Undoubtedly, a methodology properly defined and strictly followed for project management provides a firm guarantee that the work will be done on time, in budget and according to specifications. A project management methodology in simple terms is a “must-have” to avoid failure and reduce risks, because is one of the critical success factors, such basic skills of the management team. This is the simple way to guide the team through the design and execution phases, processes and tasks throughout...

  12. Methodology for ranking restoration options

    DEFF Research Database (Denmark)

    Jensen, Per Hedemann

    1999-01-01

    techniques as a function of contamination and site characteristics. The project includes analyses of existing remediation methodologies and contaminated sites, and is structured in the following steps:-characterisation of relevant contaminated sites -identication and characterisation of relevant restoration...... techniques -assessment of the radiological impact -development and application of a selection methodology for restoration options -formulation ofgeneric conclusions and development of a manual The project is intended to apply to situations in which sites with nuclear installations have been contaminated...

  13. Managerial Methodology in Public Institutions

    Directory of Open Access Journals (Sweden)

    Ion VERBONCU

    2010-10-01

    Full Text Available One of the most important ways of making public institutions more efficient is by applying managerial methodology, embodied in the promotion of management tools, modern and sophisticated methodologies, as well as operation of designing/redesigning and maintenance of the management process and its components. Their implementation abides the imprint of constructive and functional particularities of public institutions, decentralized and devolved, and, of course, the managers’ expertise of these organizations. Managerial methodology is addressed through three important instruments diagnosis, management by objectives and scoreboard. Its presence in the performance management process should be mandatory, given the favorable influence on the management and economic performance and the degree of scholastic approach of the managers’ performance.

  14. Blanket safety by GEMSAFE methodology

    International Nuclear Information System (INIS)

    Sawada, Tetsuo; Saito, Masaki

    2001-01-01

    General Methodology of Safety Analysis and Evaluation for Fusion Energy Systems (GEMSAFE) has been applied to a number of fusion system designs, such as R-tokamak, Fusion Experimental Reactor (FER), and the International Thermonuclear Experimental Reactor (ITER) designs in the both stages of Conceptual Design Activities (CDA) and Engineering Design Activities (EDA). Though the major objective of GEMSAFE is to reasonably select design basis events (DBEs) it is also useful to elucidate related safety functions as well as requirements to ensure its safety. In this paper, we apply the methodology to fusion systems with future tritium breeding blankets and make clear which points of the system should be of concern from safety ensuring point of view. In this context, we have obtained five DBEs that are related to the blanket system. We have also clarified the safety functions required to prevent accident propagations initiated by those blanket-specific DBEs. The outline of the methodology is also reviewed. (author)

  15. The NLC Software Requirements Methodology

    Energy Technology Data Exchange (ETDEWEB)

    Shoaee, Hamid

    2002-08-20

    We describe the software requirements and development methodology developed for the NLC control system. Given the longevity of that project, and the likely geographical distribution of the collaborating engineers, the planned requirements management process is somewhat more formal than the norm in high energy physics projects. The short term goals of the requirements process are to accurately estimate costs, to decompose the problem, and to determine likely technologies. The long term goal is to enable a smooth transition from high level functional requirements to specific subsystem and component requirements for individual programmers, and to support distributed development. The methodology covers both ends of that life cycle. It covers both the analytical and documentary tools for software engineering, and project management support. This paper introduces the methodology, which is fully described in [1].

  16. Methodology, theoretical framework and scholarly significance: An ...

    African Journals Online (AJOL)

    Methodology, theoretical framework and scholarly significance: An overview ... AFRICAN JOURNALS ONLINE (AJOL) · Journals · Advanced Search ... Keywords: Legal Research, Methodology, Theory, Pedagogy, Legal Training, Scholarship ...

  17. Methodological Guidelines for Advertising Research

    DEFF Research Database (Denmark)

    Rossiter, John R.; Percy, Larry

    2017-01-01

    In this article, highly experienced advertising academics and advertising research consultants John R. Rossiter and Larry Percy present and discuss what they believe to be the seven most important methodological guidelines that need to be implemented to improve the practice of advertising research....... Their focus is on methodology, defined as first choosing a suitable theoretical framework to guide the research study and then identifying the advertising responses that need to be studied. Measurement of those responses is covered elsewhere in this special issue in the article by Bergkvist and Langner. Most...

  18. Acoustic emission methodology and application

    CERN Document Server

    Nazarchuk, Zinoviy; Serhiyenko, Oleh

    2017-01-01

    This monograph analyses in detail the physical aspects of the elastic waves radiation during deformation or fracture of materials. I presents the  methodological bases for the practical use of acoustic emission device, and describes the results of theoretical and experimental researches of evaluation of the crack growth resistance of materials, selection of the useful AE signals. The efficiency of this methodology is shown through the diagnostics of various-purpose industrial objects. The authors obtain results of experimental researches with the help of the new methods and facilities.

  19. An LWR design decision Methodology

    International Nuclear Information System (INIS)

    Leahy, T.J.; Rees, D.C.; Young, J.

    1982-01-01

    While all parties involved in nuclear plant regulation endeavor to make decisions which optimize the considerations of plant safety and financial impacts, these decisions are generally made without the benefit of a systematic and rigorous approach to the questions confronting the decision makers. A Design Decision Methodology has been developed which provides such a systematic approach. By employing this methodology, which makes use of currently accepted probabilistic risk assessment techniques and cost estimation, informed decisions may be made against a background of comparisons between the relative levels of safety and costs associated with various design alternatives

  20. Qualitative methodology in developmental psychology

    DEFF Research Database (Denmark)

    Demuth, Carolin; Mey, Günter

    2015-01-01

    Qualitative methodology presently is gaining increasing recognition in developmental psychology. Although the founders of developmental psychology to a large extent already used qualitative procedures, the field was long dominated by a (post) positivistic quantitative paradigm. The increasing rec...... in qualitative research offers a promising avenue to advance the field in this direction.......Qualitative methodology presently is gaining increasing recognition in developmental psychology. Although the founders of developmental psychology to a large extent already used qualitative procedures, the field was long dominated by a (post) positivistic quantitative paradigm. The increasing...

  1. Qualitative Methodology in Unfamiliar Cultures

    DEFF Research Database (Denmark)

    Svensson, Christian Franklin

    2014-01-01

    on a qualitative methodology, conscious reflection on research design and objectivity is important when doing fieldwork. This case study discusses such reflections. Emphasis throughout is given to applied qualitative methodology and its contributions to the social sciences, in particular having to do......This case study discusses qualitative fieldwork in Malaysia. The trends in higher education led to investigating how and why young Indians and Chinese in Malaysia are using the university to pursue a life strategy. Given the importance of field context in designing and analysing research based...

  2. Observational methodology in sport sciences

    Directory of Open Access Journals (Sweden)

    M. Teresa Anguera

    2013-11-01

    Full Text Available This paper reviews the conceptual framework, the key literature and the methods (observation tools, such as category systems and field formats, and coding software, etc. that should be followed when conducting research from the perspective of observational methodology. The observational designs used by the authors’ research group over the last twenty years are discussed, and the procedures for analysing data and assessing their quality are described. Mention is also made of the latest methodological trends in this field, such as the use of mixed methods.

  3. Reflections on Design Methodology Research

    DEFF Research Database (Denmark)

    2011-01-01

    We shall reflect on the results of Design Methodology research and their impact on design practice. In the past 50 years the number of researchers in the field has expanded enormously – as has the number of publications. During the same period design practice and its products have changed...... and produced are also now far more complex and distributed, putting designers under ever increasing pressure. We shall address the question: Are the results of Design Methodology research appropriate and are they delivering the expected results in design practice? In our attempt to answer this question we...

  4. Methodologic frontiers in environmental epidemiology.

    OpenAIRE

    Rothman, K J

    1993-01-01

    Environmental epidemiology comprises the epidemiologic study of those environmental factors that are outside the immediate control of the individual. Exposures of interest to environmental epidemiologists include air pollution, water pollution, occupational exposure to physical and chemical agents, as well as psychosocial elements of environmental concern. The main methodologic problem in environmental epidemiology is exposure assessment, a problem that extends through all of epidemiologic re...

  5. IMSF: Infinite Methodology Set Framework

    Science.gov (United States)

    Ota, Martin; Jelínek, Ivan

    Software development is usually an integration task in enterprise environment - few software applications work autonomously now. It is usually a collaboration of heterogeneous and unstable teams. One serious problem is lack of resources, a popular result being outsourcing, ‘body shopping’, and indirectly team and team member fluctuation. Outsourced sub-deliveries easily become black boxes with no clear development method used, which has a negative impact on supportability. Such environments then often face the problems of quality assurance and enterprise know-how management. The used methodology is one of the key factors. Each methodology was created as a generalization of a number of solved projects, and each methodology is thus more or less connected with a set of task types. When the task type is not suitable, it causes problems that usually result in an undocumented ad-hoc solution. This was the motivation behind formalizing a simple process for collaborative software engineering. Infinite Methodology Set Framework (IMSF) defines the ICT business process of adaptive use of methods for classified types of tasks. The article introduces IMSF and briefly comments its meta-model.

  6. Unattended Monitoring System Design Methodology

    International Nuclear Information System (INIS)

    Drayer, D.D.; DeLand, S.M.; Harmon, C.D.; Matter, J.C.; Martinez, R.L.; Smith, J.D.

    1999-01-01

    A methodology for designing Unattended Monitoring Systems starting at a systems level has been developed at Sandia National Laboratories. This proven methodology provides a template that describes the process for selecting and applying appropriate technologies to meet unattended system requirements, as well as providing a framework for development of both training courses and workshops associated with unattended monitoring. The design and implementation of unattended monitoring systems is generally intended to respond to some form of policy based requirements resulting from international agreements or domestic regulations. Once the monitoring requirements are established, a review of the associated process and its related facilities enables identification of strategic monitoring locations and development of a conceptual system design. The detailed design effort results in the definition of detection components as well as the supporting communications network and data management scheme. The data analyses then enables a coherent display of the knowledge generated during the monitoring effort. The resultant knowledge is then compared to the original system objectives to ensure that the design adequately addresses the fundamental principles stated in the policy agreements. Implementation of this design methodology will ensure that comprehensive unattended monitoring system designs provide appropriate answers to those critical questions imposed by specific agreements or regulations. This paper describes the main features of the methodology and discusses how it can be applied in real world situations

  7. Environmental Zoning: Some methodological implications

    NARCIS (Netherlands)

    Ike, Paul; Voogd, Henk

    1991-01-01

    The purpose of this article is to discuss some methodological problems of environmental zoning. The principle of environmental zoning will be elaborated. In addition an overview is given of a number of approaches that have been followed in practice to arrive at an integral judgement. Finally some

  8. A methodology for string resolution

    International Nuclear Information System (INIS)

    Karonis, N.T.

    1992-11-01

    In this paper we present a methodology, not a tool. We present this methodology with the intent that it be adopted, on a case by case basis, by each of the existing tools in EPICS. In presenting this methodology, we describe each of its two components in detail and conclude with an example depicting how the methodology can be used across a pair of tools. The task of any control system is to provide access to the various components of the machine being controlled, for example, the Advanced Photon Source (APS). By access, we mean the ability to monitor the machine's status (reading) as well as the ability to explicitly change its status (writing). The Experimental Physics and Industrial Control System (EPICS) is a set of tools, designed to act in concert, that allows one to construct a control system. EPICS provides the ability to construct a control system that allows reading and writing access to the machine. It does this through the notion of databases. Each of the components of the APS that is accessed by the control system is represented in EPICS by a set of named database records. Once this abstraction is made, from physical device to named database records, the process of monitoring and changing the state of that device becomes the simple process of reading and writing information from and to its associated named records

  9. Counting stem cells : methodological constraints

    NARCIS (Netherlands)

    Bystrykh, Leonid V.; Verovskaya, Evgenia; Zwart, Erik; Broekhuis, Mathilde; de Haan, Gerald

    The number of stem cells contributing to hematopoiesis has been a matter of debate. Many studies use retroviral tagging of stem cells to measure clonal contribution. Here we argue that methodological factors can impact such clonal analyses. Whereas early studies had low resolution, leading to

  10. Test reactor risk assessment methodology

    International Nuclear Information System (INIS)

    Jennings, R.H.; Rawlins, J.K.; Stewart, M.E.

    1976-04-01

    A methodology has been developed for the identification of accident initiating events and the fault modeling of systems, including common mode identification, as these methods are applied in overall test reactor risk assessment. The methods are exemplified by a determination of risks to a loss of primary coolant flow in the Engineering Test Reactor

  11. METHODOLOGICAL ELEMENTS OF SITUATIONAL ANALYSIS

    Directory of Open Access Journals (Sweden)

    Tetyana KOVALCHUK

    2016-07-01

    Full Text Available The article deals with the investigation of theoretical and methodological principles of situational analysis. The necessity of situational analysis is proved in modern conditions. The notion “situational analysis” is determined. We have concluded that situational analysis is a continuous system study which purpose is to identify dangerous situation signs, to evaluate comprehensively such signs influenced by a system of objective and subjective factors, to search for motivated targeted actions used to eliminate adverse effects of the exposure of the system to the situation now and in the future and to develop the managerial actions needed to bring the system back to norm. It is developed a methodological approach to the situational analysis, its goal is substantiated, proved the expediency of diagnostic, evaluative and searching functions in the process of situational analysis. The basic methodological elements of the situational analysis are grounded. The substantiation of the principal methodological elements of system analysis will enable the analyst to develop adaptive methods able to take into account the peculiar features of a unique object which is a situation that has emerged in a complex system, to diagnose such situation and subject it to system and in-depth analysis, to identify risks opportunities, to make timely management decisions as required by a particular period.

  12. 16 Offsetting deficit conceptualisations: methodological ...

    African Journals Online (AJOL)

    uses the concepts of literacy practices and knowledge recontextualisation to ... 1996, 2000) theory of 'knowledge recontextualisation' in the development of curricula .... cognitive, social and cultural abilities needed to fit in and thrive in the HE learning .... this argument, that a methodology and analytic framework that seeks to ...

  13. Methodology for the case studies

    NARCIS (Netherlands)

    Smits, M.J.W.; Woltjer, G.B.

    2017-01-01

    This document is about the methodology and selection of the case studies. It is meant as a guideline for the case studies, and together with the other reports in this work package can be a source of inform ation for policy officers, interest groups and researchers evaluating or performing impact

  14. Safety at Work : Research Methodology

    NARCIS (Netherlands)

    Beurden, van K. (Karin); Boer, de J. (Johannes); Brinks, G. (Ger); Goering-Zaburnenko, T. (Tatiana); Houten, van Y. (Ynze); Teeuw, W. (Wouter)

    2012-01-01

    In this document, we provide the methodological background for the Safety atWork project. This document combines several project deliverables as defined inthe overall project plan: validation techniques and methods (D5.1.1), performanceindicators for safety at work (D5.1.2), personal protection

  15. Environmental impact statement analysis: dose methodology

    International Nuclear Information System (INIS)

    Mueller, M.A.; Strenge, D.L.; Napier, B.A.

    1981-01-01

    Standardized sections and methodologies are being developed for use in environmental impact statements (EIS) for activities to be conducted on the Hanford Reservation. Five areas for standardization have been identified: routine operations dose methodologies, accident dose methodology, Hanford Site description, health effects methodology, and socioeconomic environment for Hanford waste management activities

  16. A Critique of Methodological Dualism in Education

    Science.gov (United States)

    Yang, Jeong A.; Yoo, Jae-Bong

    2018-01-01

    This paper aims to critically examine the paradigm of methodological dualism and explore whether methodologies in social science currently are appropriate for educational research. There are two primary methodologies for studying education: quantitative and qualitative methods. This is what we mean by "methodological dualism". Is…

  17. Feminist Methodologies and Engineering Education Research

    Science.gov (United States)

    Beddoes, Kacey

    2013-01-01

    This paper introduces feminist methodologies in the context of engineering education research. It builds upon other recent methodology articles in engineering education journals and presents feminist research methodologies as a concrete engineering education setting in which to explore the connections between epistemology, methodology and theory.…

  18. Methodologies of Uncertainty Propagation Calculation

    International Nuclear Information System (INIS)

    Chojnacki, Eric

    2002-01-01

    After recalling the theoretical principle and the practical difficulties of the methodologies of uncertainty propagation calculation, the author discussed how to propagate input uncertainties. He said there were two kinds of input uncertainty: - variability: uncertainty due to heterogeneity, - lack of knowledge: uncertainty due to ignorance. It was therefore necessary to use two different propagation methods. He demonstrated this in a simple example which he generalised, treating the variability uncertainty by the probability theory and the lack of knowledge uncertainty by the fuzzy theory. He cautioned, however, against the systematic use of probability theory which may lead to unjustifiable and illegitimate precise answers. Mr Chojnacki's conclusions were that the importance of distinguishing variability and lack of knowledge increased as the problem was getting more and more complex in terms of number of parameters or time steps, and that it was necessary to develop uncertainty propagation methodologies combining probability theory and fuzzy theory

  19. Multicriteria methodology for decision aiding

    CERN Document Server

    Roy, Bernard

    1996-01-01

    This is the first comprehensive book to present, in English, the multicriteria methodology for decision aiding In the foreword the distinctive features and main ideas of the European School of MCDA are outlined The twelve chapters are essentially expository in nature, but scholarly in treatment Some questions, which are too often neglected in the literature on decision theory, such as how is a decision made, who are the actors, what is a decision aiding model, how to define the set of alternatives, are discussed Examples are used throughout the book to illustrate the various concepts Ways to model the consequences of each alternative and building criteria taking into account the inevitable imprecisions, uncertainties and indeterminations are described and illustrated The three classical operational approaches of MCDA synthesis in one criterion (including MAUT), synthesis by outranking relations, interactive local judgements, are studied This methodology tries to be a theoretical or intellectual framework dire...

  20. AGR core safety assessment methodologies

    International Nuclear Information System (INIS)

    McLachlan, N.; Reed, J.; Metcalfe, M.P.

    1996-01-01

    To demonstrate the safety of its gas-cooled graphite-moderated AGR reactors, nuclear safety assessments of the cores are based upon a methodology which demonstrates no component failures, geometrical stability of the structure and material properties bounded by a database. All AGRs continue to meet these three criteria. However, predictions of future core behaviour indicate that the safety case methodology will eventually need to be modified to deal with new phenomena. A new approach to the safety assessment of the cores is currently under development, which can take account of these factors while at the same time providing the same level of protection for the cores. This approach will be based on the functionality of the core: unhindered movement of control rods, continued adequate cooling of the fuel and the core, continued ability to charge and discharge fuel. (author). 5 figs

  1. Methodological update in Medicina Intensiva.

    Science.gov (United States)

    García Garmendia, J L

    2018-04-01

    Research in the critically ill is complex by the heterogeneity of patients, the difficulties to achieve representative sample sizes and the number of variables simultaneously involved. However, the quantity and quality of records is high as well as the relevance of the variables used, such as survival. The methodological tools have evolved to offering new perspectives and analysis models that allow extracting relevant information from the data that accompanies the critically ill patient. The need for training in methodology and interpretation of results is an important challenge for the intensivists who wish to be updated on the research developments and clinical advances in Intensive Medicine. Copyright © 2017 Elsevier España, S.L.U. y SEMNIM. All rights reserved.

  2. Methodology for building confidence measures

    Science.gov (United States)

    Bramson, Aaron L.

    2004-04-01

    This paper presents a generalized methodology for propagating known or estimated levels of individual source document truth reliability to determine the confidence level of a combined output. Initial document certainty levels are augmented by (i) combining the reliability measures of multiply sources, (ii) incorporating the truth reinforcement of related elements, and (iii) incorporating the importance of the individual elements for determining the probability of truth for the whole. The result is a measure of confidence in system output based on the establishing of links among the truth values of inputs. This methodology was developed for application to a multi-component situation awareness tool under development at the Air Force Research Laboratory in Rome, New York. Determining how improvements in data quality and the variety of documents collected affect the probability of a correct situational detection helps optimize the performance of the tool overall.

  3. Mo(ve)ment-methodology

    DEFF Research Database (Denmark)

    Mørck, Line Lerche; Christian Celosse-Andersen, Martin

    2018-01-01

    This paper describes the theoretical basis for and development of a moment-movement research methodology, based on an integration of critical psychological practice research and critical ethnographic social practice theory. Central theoretical conceptualizations, such as human agency, life...... conditions and identity formation, are discussed in relation to criminological theories of gang desistance. The paper illustrates how the mo(ve)ment methodology was applied in a study of comprehensive processes of identity (re)formation and gang exit processes. This study was conducted with Martin, a former....... This is a moment which captures Martin’s complex and ambiguous feelings of conflictual concerns, frustration, anger, and a new feeling of insecurity in his masculinity, as well as engagement and a sense of deep meaningfulness as he becomes a more reflective academic. All these conflicting feelings also give...

  4. Design methodology of Dutch banknotes

    Science.gov (United States)

    de Heij, Hans A. M.

    2000-04-01

    Since the introduction of a design methodology for Dutch banknotes, the quality of Dutch paper currency has improved in more than one way. The methodology is question provides for (i) a design policy, which helps fix clear objectives; (ii) design management, to ensure a smooth cooperation between the graphic designer, printer, papermaker an central bank, (iii) a program of requirements, a banknote development guideline for all parties involved. This systematic approach enables an objective selection of design proposals, including security features. Furthermore, the project manager obtains regular feedback from the public by conducting market surveys. Each new design of a Netherlands Guilder banknote issued by the Nederlandsche Bank of the past 50 years has been an improvement on its predecessor in terms of value recognition, security and durability.

  5. Workshops as a Research Methodology

    DEFF Research Database (Denmark)

    Ørngreen, Rikke; Levinsen, Karin Tweddell

    2017-01-01

    , and workshops as a research methodology. Focusing primarily on the latter, this paper presents five studies on upper secondary and higher education teachers’ professional development and on teaching and learning through video conferencing. Through analysis and discussion of these studies’ findings, we argue......This paper contributes to knowledge on workshops as a research methodology, and specifically on how such workshops pertain to e-learning. A literature review illustrated that workshops are discussed according to three different perspectives: workshops as a means, workshops as practice...... that workshops provide a platform that can aid researchers in identifying and exploring relevant factors in a given domain by providing means for understanding complex work and knowledge processes that are supported by technology (for example, e-learning). The approach supports identifying factors...

  6. Methodological challenges and lessons learned

    DEFF Research Database (Denmark)

    Nielsen, Poul Erik; Gustafsson, Jessica

    2017-01-01

    Taking as point of departure three recently conducted empirical studies, the aim of this article is to theoretically and empirically discuss methodological challenges studying the interrelations between media and social reality and to critically reflect on the methodologies used in the studies....... By deconstructing the studies, the article draws attention to the fact that different methods are able to grasp different elements of social reality. Moreover, by analysing the power relations at play, the article demonstrated that the interplay between interviewer and interviewee, and how both parties fit...... into present power structures, greatly influence the narratives that are co-produced during interviews. The article thus concludes that in order to fully understand complex phenomena it is not just enough to use a mixture of methods, the makeup of the research team is also imperative, as a diverse team...

  7. Implementation impacts of PRL methodology

    International Nuclear Information System (INIS)

    Caudill, J.A.; Krupa, J.F.; Meadors, R.E.; Odum, J.V.; Rodrigues, G.C.

    1993-02-01

    This report responds to a DOE-SR request to evaluate the impacts from implementation of the proposed Plutonium Recovery Limit (PRL) methodology. The PRL Methodology is based on cost minimization for decisions to discard or recover plutonium contained in scrap, residues, and other plutonium bearing materials. Implementation of the PRL methodology may result in decisions to declare as waste certain plutonium bearing materials originally considered to be a recoverable plutonium product. Such decisions may have regulatory impacts, because any material declared to be waste would immediately be subject to provisions of the Resource Conservation and Recovery Act (RCRA). The decision to discard these materials will have impacts on waste storage, treatment, and disposal facilities. Current plans for the de-inventory of plutonium processing facilities have identified certain materials as candidates for discard based upon the economic considerations associated with extending the operating schedules for recovery of the contained plutonium versus potential waste disposal costs. This report evaluates the impacts of discarding those materials as proposed by the F Area De-Inventory Plan and compares the De-Inventory Plan assessments with conclusions from application of the PRL. The impact analysis was performed for those materials proposed as potential candidates for discard by the De-Inventory Plan. The De-Inventory Plan identified 433 items, containing approximately 1% of the current SRS Pu-239 inventory, as not appropriate for recovery as the site moves to complete the mission of F-Canyon and FB-Line. The materials were entered into storage awaiting recovery as product under the Department's previous Economic Discard Limit (EDL) methodology which valued plutonium at its incremental cost of production in reactors. An application of Departmental PRLs to the subject 433 items revealed that approximately 40% of them would continue to be potentially recoverable as product plutonium

  8. ISE System Development Methodology Manual

    Energy Technology Data Exchange (ETDEWEB)

    Hayhoe, G.F.

    1992-02-17

    The Information Systems Engineering (ISE) System Development Methodology Manual (SDM) is a framework of life cycle management guidelines that provide ISE personnel with direction, organization, consistency, and improved communication when developing and maintaining systems. These guide-lines were designed to allow ISE to build and deliver Total Quality products, and to meet the goals and requirements of the US Department of Energy (DOE), Westinghouse Savannah River Company, and Westinghouse Electric Corporation.

  9. Environmental Testing Methodology in Biometrics

    OpenAIRE

    Fernández Saavedra, Belén; Sánchez Reíllo, Raúl; Alonso Moreno, Raúl; Miguel Hurtado, Óscar

    2010-01-01

    8 pages document + 5-slide presentation.-- Contributed to: 1st International Biometric Performance Conference (IBPC 2010, NIST, Gaithersburg, MD, US, Mar 1-5, 2010). Recently, biometrics is used in many security systems and these systems can be located in different environments. As many experts claim and previous works have demonstrated, environmental conditions influence biometric performance. Nevertheless, there is not a specific methodology for testing this influence at the moment...

  10. Soft systems methodology: other voices

    OpenAIRE

    Holwell, Sue

    2000-01-01

    This issue of Systemic Practice and Action Research, celebrating the work of Peter Checkland, in the particular nature and development of soft systems methodology (SSM), would not have happened unless the work was seen by others as being important. No significant contribution to thinking happens without a secondary literature developing. Not surprisingly, many commentaries have accompanied the ongoing development of SSM. Some of these are insightful, some full of errors, and some include both...

  11. Systems engineering agile design methodologies

    CERN Document Server

    Crowder, James A

    2013-01-01

    This book examines the paradigm of the engineering design process. The authors discuss agile systems and engineering design. The book captures the entire design process (functionbases), context, and requirements to affect real reuse. It provides a methodology for an engineering design process foundation for modern and future systems design. This book captures design patterns with context for actual Systems Engineering Design Reuse and contains a new paradigm in Design Knowledge Management.

  12. Methodological remarks on contraction theory

    DEFF Research Database (Denmark)

    Jouffroy, Jerome; Slotine, Jean-Jacques E.

    Because contraction analysis stems from a differential and incremental framework, the nature and methodology of contraction-based proofs are significantly different from those of their Lyapunov-based counterparts. This paper specifically studies this issue, and illustrates it by revisiting some c...... classical examples traditionally addressed using Lyapunov theory. Even in these cases, contraction tools can often yield significantly simplified analysis. The examples include adaptive control, robotics, and a proof of convergence of the deterministic Extended Kalman Filter....

  13. Artificial Intelligence Techniques and Methodology

    OpenAIRE

    Carbonell, Jaime G.; Sleeman, Derek

    1982-01-01

    Two closely related aspects of artificial intelligence that have received comparatively little attention in the recent literature are research methodology, and the analysis of computational techniques that span multiple application areas. We believe both issues to be increasingly significant as Artificial Intelligence matures into a science and spins off major application efforts. It is imperative to analyze the repertoire of AI methods with respect to past experience, utility in new domains,...

  14. Developing Foucault's Discourse Analytic Methodology

    Directory of Open Access Journals (Sweden)

    Rainer Diaz-Bone

    2006-01-01

    Full Text Available A methodological position for a FOUCAULTian discourse analysis is presented. A sequence of analytical steps is introduced and an illustrating example is offered. It is emphasized that discourse analysis has to discover the system-level of discursive rules and the deeper structure of the discursive formation. Otherwise the analysis will be unfinished. Michel FOUCAULTs work is theoretically grounded in French structuralism and (the so called post-structuralism. In this paper, post-structuralism is not conceived as a means for overcoming of structuralism, but as a way of critically continuing the structural perspective. In this way, discursive structures can be related to discursive practices and the concept of structure can be disclosed (e. g. to inter-discourse or DERRIDAs concept of structurality. In this way, the structural methodology is continued and radicalized, but not given up. In this paper, FOUCAULTs theory is combined with the works of Michel PÊCHEUX and (especially for the sociology of knowledge and the sociology of culture Pierre BOURDIEU. The practice of discourse analysis is theoretically grounded. This practice can be conceived as a reflexive coupling of deconstruction and reconstruction in the material to be analyzed. This methodology therefore can be characterized as a reconstructive qualitative methodology. At the end of the article, forms of discourse analysis are criticized that do not intend to recover the system level of discursive rules and that do not intend to discover the deeper structure of the discursive formation (i. e. episteme, socio-episteme. These forms merely are commentaries of discourses (not their analyses, they remain phenomenological and are therefore: pre-structuralist. URN: urn:nbn:de:0114-fqs060168

  15. Energy Efficiency Indicators Methodology Booklet

    Energy Technology Data Exchange (ETDEWEB)

    Sathaye, Jayant; Price, Lynn; McNeil, Michael; de la rue du Can, Stephane

    2010-05-01

    This Methodology Booklet provides a comprehensive review and methodology guiding principles for constructing energy efficiency indicators, with illustrative examples of application to individual countries. It reviews work done by international agencies and national government in constructing meaningful energy efficiency indicators that help policy makers to assess changes in energy efficiency over time. Building on past OECD experience and best practices, and the knowledge of these countries' institutions, relevant sources of information to construct an energy indicator database are identified. A framework based on levels of hierarchy of indicators -- spanning from aggregate, macro level to disaggregated end-use level metrics -- is presented to help shape the understanding of assessing energy efficiency. In each sector of activity: industry, commercial, residential, agriculture and transport, indicators are presented and recommendations to distinguish the different factors affecting energy use are highlighted. The methodology booklet addresses specifically issues that are relevant to developing indicators where activity is a major factor driving energy demand. A companion spreadsheet tool is available upon request.

  16. Software engineering methodologies and tools

    Science.gov (United States)

    Wilcox, Lawrence M.

    1993-01-01

    Over the years many engineering disciplines have developed, including chemical, electronic, etc. Common to all engineering disciplines is the use of rigor, models, metrics, and predefined methodologies. Recently, a new engineering discipline has appeared on the scene, called software engineering. For over thirty years computer software has been developed and the track record has not been good. Software development projects often miss schedules, are over budget, do not give the user what is wanted, and produce defects. One estimate is there are one to three defects per 1000 lines of deployed code. More and more systems are requiring larger and more complex software for support. As this requirement grows, the software development problems grow exponentially. It is believed that software quality can be improved by applying engineering principles. Another compelling reason to bring the engineering disciplines to software development is productivity. It has been estimated that productivity of producing software has only increased one to two percent a year in the last thirty years. Ironically, the computer and its software have contributed significantly to the industry-wide productivity, but computer professionals have done a poor job of using the computer to do their job. Engineering disciplines and methodologies are now emerging supported by software tools that address the problems of software development. This paper addresses some of the current software engineering methodologies as a backdrop for the general evaluation of computer assisted software engineering (CASE) tools from actual installation of and experimentation with some specific tools.

  17. Methodology for technical risk assessment

    International Nuclear Information System (INIS)

    Waganer, L.M.; Zuckerman, D.S.

    1983-01-01

    A methodology has been developed for and applied to the assessment of the technical risks associated with an evolving technology. This methodology, originally developed for fusion by K. W. Billman and F. R. Scott at EPRI, has been applied to assess the technical risk of a fuel system for a fusion reactor. Technical risk is defined as the risk that a particular technology or component which is currently under development will not achieve a set of required technical specifications (i.e. probability of failure). The individual steps in the technical risk assessment are summarized. The first step in this methodology is to clearly and completely quantify the technical requirements for the particular system being examined. The next step is to identify and define subsystems and various options which appear capable of achieving the required technical performance. The subsystem options are then characterized regarding subsystem functions, interface requirements with the subsystems and systems, important components, developmental obstacles and technical limitations. Key technical subsystem performance parameters are identified which directly or indirectly relate to the system technical specifications. Past, existing and future technical performance data from subsystem experts are obtained by using a Bayesian Interrogation technique. The input data is solicited in the form of probability functions. Thus the output performance of the system is expressed as probability functions

  18. Methodology for astronaut reconditioning research.

    Science.gov (United States)

    Beard, David J; Cook, Jonathan A

    2017-01-01

    Space medicine offers some unique challenges, especially in terms of research methodology. A specific challenge for astronaut reconditioning involves identification of what aspects of terrestrial research methodology hold and which require modification. This paper reviews this area and presents appropriate solutions where possible. It is concluded that spaceflight rehabilitation research should remain question/problem driven and is broadly similar to the terrestrial equivalent on small populations, such as rare diseases and various sports. Astronauts and Medical Operations personnel should be involved at all levels to ensure feasibility of research protocols. There is room for creative and hybrid methodology but careful systematic observation is likely to be more achievable and fruitful than complex trial based comparisons. Multi-space agency collaboration will be critical to pool data from small groups of astronauts with the accepted use of standardised outcome measures across all agencies. Systematic reviews will be an essential component. Most limitations relate to the inherent small sample size available for human spaceflight research. Early adoption of a co-operative model for spaceflight rehabilitation research is therefore advised. Copyright © 2016 Elsevier Ltd. All rights reserved.

  19. Methodology for ranking restoration options

    International Nuclear Information System (INIS)

    Hedemann Jensen, Per

    1999-04-01

    The work described in this report has been performed as a part of the RESTRAT Project FI4P-CT95-0021a (PL 950128) co-funded by the Nuclear Fission Safety Programme of the European Commission. The RESTRAT project has the overall objective of developing generic methodologies for ranking restoration techniques as a function of contamination and site characteristics. The project includes analyses of existing remediation methodologies and contaminated sites, and is structured in the following steps: characterisation of relevant contaminated sites; identification and characterisation of relevant restoration techniques; assessment of the radiological impact; development and application of a selection methodology for restoration options; formulation of generic conclusions and development of a manual. The project is intended to apply to situations in which sites with nuclear installations have been contaminated with radioactive materials as a result of the operation of these installations. The areas considered for remedial measures include contaminated land areas, rivers and sediments in rivers, lakes, and sea areas. Five contaminated European sites have been studied. Various remedial measures have been envisaged with respect to the optimisation of the protection of the populations being exposed to the radionuclides at the sites. Cost-benefit analysis and multi-attribute utility analysis have been applied for optimisation. Health, economic and social attributes have been included and weighting factors for the different attributes have been determined by the use of scaling constants. (au)

  20. Survey of Dynamic PSA Methodologies

    International Nuclear Information System (INIS)

    Lee, Hansul; Kim, Hyeonmin; Heo, Gyunyoung; Kim, Taewan

    2015-01-01

    Event Tree(ET)/Fault Tree(FT) are significant methodology in Probabilistic Safety Assessment(PSA) for Nuclear Power Plants(NPPs). ET/FT methodology has the advantage for users to be able to easily learn and model. It enables better communication between engineers engaged in the same field. However, conventional methodologies are difficult to cope with the dynamic behavior (e.g. operation mode changes or sequence-dependent failure) and integrated situation of mechanical failure and human errors. Meanwhile, new possibilities are coming for the improved PSA by virtue of the dramatic development on digital hardware, software, information technology, and data analysis.. More specifically, the computing environment has been greatly improved with being compared to the past, so we are able to conduct risk analysis with the large amount of data actually available. One method which can take the technological advantages aforementioned should be the dynamic PSA such that conventional ET/FT can have time- and condition-dependent behaviors in accident scenarios. In this paper, we investigated the various enabling techniques for the dynamic PSA. Even though its history and academic achievement was great, it seems less interesting from industrial and regulatory viewpoint. Authors expect this can contribute to better understanding of dynamic PSA in terms of algorithm, practice, and applicability. In paper, the overview for the dynamic PSA was conducted. Most of methodologies share similar concepts. Among them, DDET seems a backbone for most of methodologies since it can be applied to large problems. The common characteristics sharing the concept of DDET are as follows: • Both deterministic and stochastic approaches • Improves the identification of PSA success criteria • Helps to limit detrimental effects of sequence binning (normally adopted in PSA) • Helps to avoid defining non-optimal success criteria that may distort the risk • Framework for comprehensively considering

  1. Survey of Dynamic PSA Methodologies

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Hansul; Kim, Hyeonmin; Heo, Gyunyoung [Kyung Hee University, Yongin (Korea, Republic of); Kim, Taewan [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of)

    2015-05-15

    Event Tree(ET)/Fault Tree(FT) are significant methodology in Probabilistic Safety Assessment(PSA) for Nuclear Power Plants(NPPs). ET/FT methodology has the advantage for users to be able to easily learn and model. It enables better communication between engineers engaged in the same field. However, conventional methodologies are difficult to cope with the dynamic behavior (e.g. operation mode changes or sequence-dependent failure) and integrated situation of mechanical failure and human errors. Meanwhile, new possibilities are coming for the improved PSA by virtue of the dramatic development on digital hardware, software, information technology, and data analysis.. More specifically, the computing environment has been greatly improved with being compared to the past, so we are able to conduct risk analysis with the large amount of data actually available. One method which can take the technological advantages aforementioned should be the dynamic PSA such that conventional ET/FT can have time- and condition-dependent behaviors in accident scenarios. In this paper, we investigated the various enabling techniques for the dynamic PSA. Even though its history and academic achievement was great, it seems less interesting from industrial and regulatory viewpoint. Authors expect this can contribute to better understanding of dynamic PSA in terms of algorithm, practice, and applicability. In paper, the overview for the dynamic PSA was conducted. Most of methodologies share similar concepts. Among them, DDET seems a backbone for most of methodologies since it can be applied to large problems. The common characteristics sharing the concept of DDET are as follows: • Both deterministic and stochastic approaches • Improves the identification of PSA success criteria • Helps to limit detrimental effects of sequence binning (normally adopted in PSA) • Helps to avoid defining non-optimal success criteria that may distort the risk • Framework for comprehensively considering

  2. Prioritization methodology for chemical replacement

    Science.gov (United States)

    Cruit, Wendy; Goldberg, Ben; Schutzenhofer, Scott

    1995-01-01

    Since United States of America federal legislation has required ozone depleting chemicals (class 1 & 2) to be banned from production, The National Aeronautics and Space Administration (NASA) and industry have been required to find other chemicals and methods to replace these target chemicals. This project was initiated as a development of a prioritization methodology suitable for assessing and ranking existing processes for replacement 'urgency.' The methodology was produced in the form of a workbook (NASA Technical Paper 3421). The final workbook contains two tools, one for evaluation and one for prioritization. The two tools are interconnected in that they were developed from one central theme - chemical replacement due to imposed laws and regulations. This workbook provides matrices, detailed explanations of how to use them, and a detailed methodology for prioritization of replacement technology. The main objective is to provide a GUIDELINE to help direct the research for replacement technology. The approach for prioritization called for a system which would result in a numerical rating for the chemicals and processes being assessed. A Quality Function Deployment (QFD) technique was used in order to determine numerical values which would correspond to the concerns raised and their respective importance to the process. This workbook defines the approach and the application of the QFD matrix. This technique: (1) provides a standard database for technology that can be easily reviewed, and (2) provides a standard format for information when requesting resources for further research for chemical replacement technology. Originally, this workbook was to be used for Class 1 and Class 2 chemicals, but it was specifically designed to be flexible enough to be used for any chemical used in a process (if the chemical and/or process needs to be replaced). The methodology consists of comparison matrices (and the smaller comparison components) which allow replacement technology

  3. The fractional scaling methodology (FSM) Part 1. methodology development

    International Nuclear Information System (INIS)

    Novak Zuber; Ivan Catton; Upendra S Rohatgi; Wolfgang Wulff

    2005-01-01

    Full text of publication follows: a quantitative methodology is developed, based on the concepts of hierarchy and synthesis, to integrate and organize information and data. The methodology uses scaling to synthesize experimental data and analytical results, and to provide quantitative criteria for evaluating the effects of various design and operating parameters that influence processes in a complex system such as a nuclear power plant or a related test facility. Synthesis and scaling are performed on three hierarchical levels: the process, component and system levels. Scaling on the process level determines the effect of a selected process on a particular state variable during a selected scenario. At the component level this scaling determines the effects various processes have on a state variable, and it ranks the processes according to their importance by the magnitude of the fractional change they cause on that state variable. At the system level the scaling determines the governing processes and corresponding components, ranking these in the order of importance according to their effect on the fractional change of system-wide state variables. The scaling methodology reveals on all levels the fractional change of state variables and is called therefore the Fractional Scaling Methodology (FSM). FSM synthesizes process parameters and assigns to each thermohydraulic process a dimensionless effect metric Ω = ωt, that is the product of the specific rate of fractional change ω and the characteristic time t. The rate of fractional change ω is the ratio of process transport rate over content of a preserved quantity in a component. The effect metric Ω quantifies the contribution of the process to the fractional change of a state variable in a given component. Ordering of a component effect metrics provides the hierarchy of processes in a component, then in all components and the system. FSM separates quantitatively dominant from minor processes and components and

  4. Radioisotope methodology course radioprotection aspects

    International Nuclear Information System (INIS)

    Bergoc, R.M.; Caro, R.A.; Menossi, C.A.

    1996-01-01

    The advancement knowledge in molecular and cell biology, biochemistry, medicine and pharmacology, which has taken place during the last 50 years, after World War II finalization, is really outstanding. It can be safely said that this fact is principally due to the application of radioisotope techniques. The research on metabolisms, biodistribution of pharmaceuticals, pharmacodynamics, etc., is mostly carried out by means of techniques employing radioactive materials. Radioisotopes and radiation are frequently used in medicine both as diagnostic and therapeutic tools. The radioimmunoanalysis is today a routine method in endocrinology and in general clinical medicine. The receptor determination and characterization is a steadily growing methodology used in clinical biochemistry, pharmacology and medicine. The use of radiopharmaceuticals and radiation of different origins, for therapeutic purposes, should not be overlooked. For these reasons, the importance to teach radioisotope methodology is steadily growing. This is principally the case for specialization at the post-graduate level but at the pre graduate curriculum it is worthwhile to give some elementary theoretical and practical notions on this subject. These observations are justified by a more than 30 years teaching experience at both levels at the School of Pharmacy and Biochemistry of the University of Buenos Aires, Argentina. In 1960 we began to teach Physics III, an obligatory pregraduate course for biochemistry students, in which some elementary notions of radioactivity and measurement techniques were given. Successive modifications of the biochemistry pregraduate curriculum incorporated radiochemistry as an elective subject and since 1978, radioisotope methodology, as obligatory subject for biochemistry students. This subject is given at the radioisotope laboratory during the first semester of each year and its objective is to provide theoretical and practical knowledge to the biochemistry students, even

  5. Methodologies for tracking learning paths

    DEFF Research Database (Denmark)

    Frølunde, Lisbeth; Gilje, Øystein; Lindstrand, Fredrik

    2009-01-01

    filmmakers: what furthers their interest and/or hinders it, and what learning patterns emerge. The aim of this article is to present and discuss issues regarding the methodology and meth- ods of the study, such as developing a relationship with interviewees when conducting inter- views online (using MSN). We...... suggest two considerations about using online interviews: how the interviewees value the given subject of conversation and their familiarity with being online. The benefit of getting online communication with the young filmmakers offers ease, because it is both practical and appropriates a meeting...

  6. Continuous culture apparatus and methodology

    International Nuclear Information System (INIS)

    Conway, H.L.

    1975-01-01

    At present, we are investigating the sorption of potentially toxic trace elements by phytoplankton under controlled laboratory conditions. Continuous culture techniques were used to study the mechanism of the sorption of the trace elements by unialgal diatom populations and the factors influencing this sorption. Continuous culture methodology has been used extensively to study bacterial kinetics. It is an excellent technique for obtaining a known physiological state of phytoplankton populations. An automated method for the synthesis of continuous culture medium for use in these experiments is described

  7. Chapter three: methodology of exposure modeling

    CSIR Research Space (South Africa)

    Moschandreas, DJ

    2002-12-01

    Full Text Available methodologies and models are reviewed. Three exposure/measurement methodologies are assessed. Estimation methods focus on source evaluation and attribution, sources include those outdoors and indoors as well as in occupational and in-transit environments. Fate...

  8. Methodological Issues and Practices in Qualitative Research.

    Science.gov (United States)

    Bradley, Jana

    1993-01-01

    Discusses methodological issues concerning qualitative research and describes research practices that qualitative researchers use to address these methodological issues. Topics discussed include the researcher as interpreter, the emergent nature of qualitative research, understanding the experience of others, trustworthiness in qualitative…

  9. Audit Methodology for IT Governance

    Directory of Open Access Journals (Sweden)

    Mirela GHEORGHE

    2010-01-01

    Full Text Available The continuous development of the new IT technologies was followed up by a rapid integration of them at the organization level. The management of the organizations face a new challenge: structural redefinition of the IT component in order to create plus value and to minimize IT risks through an efficient management of all IT resources of the organization. These changes have had a great impact on the governance of the IT component. The paper proposes an audit methodology of the IT Governance at the organization level. From this point of view the developed audit strategy is a strategy based on risks to enable IT auditor to study from the best angle efficiency and effectiveness of the IT Governance structure. The evaluation of the risks associated with IT Governance is a key process in planning the audit mission which will allow the identification of the segments with increased risks. With now ambition for completeness, the proposed methodology provides the auditor a useful tool in the accomplishment of his mission.

  10. Methodology of Credit Analysis Development

    Directory of Open Access Journals (Sweden)

    Slađana Neogradi

    2017-12-01

    Full Text Available The subject of research presented in this paper refers to the definition of methodology for the development of credit analysis in companies and its application in lending operations in the Republic of Serbia. With the developing credit market, there is a growing need for a well-developed risk and loss prevention system. In the introduction the process of bank analysis of the loan applicant is presented in order to minimize and manage the credit risk. By examining the subject matter, the process of processing the credit application is described, the procedure of analyzing the financial statements in order to get an insight into the borrower's creditworthiness. In the second part of the paper, the theoretical and methodological framework is presented applied in the concrete company. In the third part, models are presented which banks should use to protect against exposure to risks, i.e. their goal is to reduce losses on loan operations in our country, as well as to adjust to market conditions in an optimal way.

  11. Safeguarding the fuel cycle: Methodologies

    International Nuclear Information System (INIS)

    Gruemm, H.

    1984-01-01

    The effectiveness of IAEA safeguards is characterized by the extent to which they achieve their basic purpose - credible verification that no nuclear material is diverted from peaceful uses. This effectiveness depends inter alia but significantly on manpower in terms of the number and qualifications of inspectors. Staff increases will be required to improve effectiveness further, if this is requested by Member States, as well as to take into account new facilities expected to come under safeguards in the future. However, they are difficult to achieve due to financial constraints set by the IAEA budget. As a consequence, much has been done and is being undertaken to improve utilization of available manpower, including standardization of inspection procedures; improvement of management practices and training; rationalization of planning, reporting, and evaluation of inspection activities; and development of new equipment. This article focuses on certain aspects of the verification methodology presently used and asks: are any modifications of this methodology conceivable that would lead to economies of manpower, without loss of effectiveness. It has been stated in this context that present safeguards approaches are ''facility-oriented'' and that the adoption of a ''fuel cycle-oriented approach'' might bring about the desired savings. Many studies have been devoted to this very interesting suggestion. Up to this moment, no definite answer is available and further studies will be necessary to come to a conclusion. In what follows, the essentials of the problem are explained and some possible paths to a solution are discussed

  12. Methodology for combining dynamic responses

    International Nuclear Information System (INIS)

    Cudlin, R.; Hosford, S.; Mattu, R.; Wichman, K.

    1978-09-01

    The NRC has historically required that the structural/mechanical responses due to various accident loads and loads caused by natural phenomena, (such as earthquakes) be combined when analyzing structures, systems, and components important to safety. Several approaches to account for the potential interaction of loads resulting from accidents and natural phenomena have been used. One approach, the so-called absolute or linear summation (ABS) method, linearly adds the peak structural responses due to the individual dynamic loads. In general, the ABS method has also reflected the staff's conservative preference for the combination of dynamic load responses. A second approach, referred to as SRSS, yields a combined response equal to the square root of the sum of the squares of the peak responses due to the individual dynamic loads. The lack of a physical relationship between some of the loads has raised questions as to the proper methodology to be used in the design of nuclear power plants. An NRR Working Group was constituted to examine load combination methodologies and to develop a recommendation concerning criteria or conditions for their application. Evaluations of and recommendations on the use of the ABS and SRSS methods are provided in the report

  13. Information technology security system engineering methodology

    Science.gov (United States)

    Childs, D.

    2003-01-01

    A methodology is described for system engineering security into large information technology systems under development. The methodology is an integration of a risk management process and a generic system development life cycle process. The methodology is to be used by Security System Engineers to effectively engineer and integrate information technology security into a target system as it progresses through the development life cycle. The methodology can also be used to re-engineer security into a legacy system.

  14. Reconciling Anti-essentialism and Quantitative Methodology

    DEFF Research Database (Denmark)

    Jensen, Mathias Fjællegaard

    2017-01-01

    Quantitative methodology has a contested role in feminist scholarship which remains almost exclusively qualitative. Considering Irigaray’s notion of mimicry, Spivak’s strategic essentialism, and Butler’s contingent foundations, the essentialising implications of quantitative methodology may prove...... the potential to reconcile anti-essentialism and quantitative methodology, and thus, to make peace in the quantitative/qualitative Paradigm Wars....

  15. 42 CFR 441.472 - Budget methodology.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 4 2010-10-01 2010-10-01 false Budget methodology. 441.472 Section 441.472 Public... Self-Directed Personal Assistance Services Program § 441.472 Budget methodology. (a) The State shall set forth a budget methodology that ensures service authorization resides with the State and meets the...

  16. Application of agile methodologies in software development

    Directory of Open Access Journals (Sweden)

    Jovanović Aca D.

    2016-01-01

    Full Text Available The paper presents the potentials for the development of software using agile methodologies. Special consideration is devoted to the potentials and advantages of use of the Scrum methodology in the development of software and the relationship between the implementation of agile methodologies and the software development projects.

  17. Methodology for flammable gas evaluations

    Energy Technology Data Exchange (ETDEWEB)

    Hopkins, J.D., Westinghouse Hanford

    1996-06-12

    There are 177 radioactive waste storage tanks at the Hanford Site. The waste generates flammable gases. The waste releases gas continuously, but in some tanks the waste has shown a tendency to trap these flammable gases. When enough gas is trapped in a tank`s waste matrix, it may be released in a way that renders part or all of the tank atmosphere flammable for a period of time. Tanks must be evaluated against previously defined criteria to determine whether they can present a flammable gas hazard. This document presents the methodology for evaluating tanks in two areas of concern in the tank headspace:steady-state flammable-gas concentration resulting from continuous release, and concentration resulting from an episodic gas release.

  18. Methodological Reflections: Inter- ethnic Research

    DEFF Research Database (Denmark)

    Singla, Rashmi

    2010-01-01

    with both youth and the parental generation with ethnic minority background in Denmark. These reflections include implications and challenges related to researcher’s national, ethnic background and educational, professional position in encounter with   diverse ‘researched persons’ such as youth......This article reflects on the methodological and epistemological aspects of the ethical issues involved in encounters between researcher and research participants with ethnic minority background in contexts with diversity. Specific challenges involved in longitudinal research (10 - 15 years......) are also considered. The issues related to the social relevance of the research deriving from psycho political validity implying consideration of power dynamics in the personal, relational and collective domains are included. The primary basis for these reflections is a follow-up study concerning young...

  19. Simulation enabled safeguards assessment methodology

    International Nuclear Information System (INIS)

    Bean, Robert; Bjornard, Trond; Larson, Tom

    2007-01-01

    It is expected that nuclear energy will be a significant component of future supplies. New facilities, operating under a strengthened international nonproliferation regime will be needed. There is good reason to believe virtual engineering applied to the facility design, as well as to the safeguards system design will reduce total project cost and improve efficiency in the design cycle. Simulation Enabled Safeguards Assessment MEthodology has been developed as a software package to provide this capability for nuclear reprocessing facilities. The software architecture is specifically designed for distributed computing, collaborative design efforts, and modular construction to allow step improvements in functionality. Drag and drop wire-frame construction allows the user to select the desired components from a component warehouse, render the system for 3D visualization, and, linked to a set of physics libraries and/or computational codes, conduct process evaluations of the system they have designed. (authors)

  20. Simulation Enabled Safeguards Assessment Methodology

    International Nuclear Information System (INIS)

    Robert Bean; Trond Bjornard; Thomas Larson

    2007-01-01

    It is expected that nuclear energy will be a significant component of future supplies. New facilities, operating under a strengthened international nonproliferation regime will be needed. There is good reason to believe virtual engineering applied to the facility design, as well as to the safeguards system design will reduce total project cost and improve efficiency in the design cycle. Simulation Enabled Safeguards Assessment Methodology (SESAME) has been developed as a software package to provide this capability for nuclear reprocessing facilities. The software architecture is specifically designed for distributed computing, collaborative design efforts, and modular construction to allow step improvements in functionality. Drag and drop wireframe construction allows the user to select the desired components from a component warehouse, render the system for 3D visualization, and, linked to a set of physics libraries and/or computational codes, conduct process evaluations of the system they have designed

  1. Sustainable Innovation and Entrepreneurship Methodology

    DEFF Research Database (Denmark)

    Celik, Sine; Joore, Peter; Christodoulou, Panayiotis

    or regional “co-creation platform for sustainable solutions” to promote structural innovation. In this manual, the Sustainable Innovation and Entrepreneurship Methodology will be described. The organisational guidelines mainly take point of departure in how Aalborg University (AAU) in Denmark has organised......The objective of the InnoLabs project is to facilitate cross-sectoral, multidisciplinary solutions to complex social problems in various European settings. InnoLabs are university-driven physical and/or organizational spaces that function as student innovation laboratories and operate as a local...... this in daily practice. In line with the objectives of the Innolabs project (output 05), partners in the Innolabs project have reflected, evaluated and concluded the project experiences, which are described in this report. The InnoLabs project was developed for the 2014 call of Erasmus+ funds KA2- Cooperation...

  2. Methodologies for 2011 economic reports

    DEFF Research Database (Denmark)

    Nielsen, Rasmus

    STECF’s Expert Working Group 11-03 convened in Athens (28th March – 1st April, 2011) to discuss and seek agreement on the content, indicators, methodologies and format of the 2011 Annual Economic Reports (AER) on the EU fishing fleet, the fish processing and the aquaculture sectors. Proposals...... for improved contents and the overall structure were discussed. Templates for the national and EU overview chapters for the EU the fish processing and the aquaculture sectors were produced. Indicators for the EU fishing fleet and fish processing reports were reviewed; new indicators for the fish processing...... and the aquaculture sector reports were proposed. And topics of special interest were proposed for all three reports....

  3. Neural Networks Methodology and Applications

    CERN Document Server

    Dreyfus, Gérard

    2005-01-01

    Neural networks represent a powerful data processing technique that has reached maturity and broad application. When clearly understood and appropriately used, they are a mandatory component in the toolbox of any engineer who wants make the best use of the available data, in order to build models, make predictions, mine data, recognize shapes or signals, etc. Ranging from theoretical foundations to real-life applications, this book is intended to provide engineers and researchers with clear methodologies for taking advantage of neural networks in industrial, financial or banking applications, many instances of which are presented in the book. For the benefit of readers wishing to gain deeper knowledge of the topics, the book features appendices that provide theoretical details for greater insight, and algorithmic details for efficient programming and implementation. The chapters have been written by experts ands seemlessly edited to present a coherent and comprehensive, yet not redundant, practically-oriented...

  4. Stakeholder analysis methodologies resource book

    Energy Technology Data Exchange (ETDEWEB)

    Babiuch, W.M.; Farhar, B.C.

    1994-03-01

    Stakeholder analysis allows analysts to identify how parties might be affected by government projects. This process involves identifying the likely impacts of a proposed action and stakeholder groups affected by that action. Additionally, the process involves assessing how these groups might be affected and suggesting measures to mitigate any adverse effects. Evidence suggests that the efficiency and effectiveness of government actions can be increased and adverse social impacts mitigated when officials understand how a proposed action might affect stakeholders. This report discusses how to conduct useful stakeholder analyses for government officials making decisions on energy-efficiency and renewable-energy technologies and their commercialization. It discusses methodological issues that may affect the validity and reliability of findings, including sampling, generalizability, validity, ``uncooperative`` stakeholder groups, using social indicators, and the effect of government regulations. The Appendix contains resource directories and a list of specialists in stakeholder analysis and involvement.

  5. Inventory differences: An evaluation methodology

    International Nuclear Information System (INIS)

    Heinberg, C.L.; Roberts, N.J.

    1987-01-01

    This paper discusses an evaluation methodology which is used for inventory differences at the Los Alamos National Laboratory. It is recognized that there are various methods which can be, and are being, used to evaluate process inventory differences at DOE facilities. The purpose of this paper is to share our thoughts on the subject and our techniques with those who are responsible for the evaluation of inventory differences at their facility. One of the most dangerous aspects of any evaluation technique, especially one as complex as most inventory difference evaluations tend to be, is to fail to look at the tools being used as indicators. There is a tendency to look at the results of an evaluation by one technique as an absolute. At the Los Alamos National Laboratory, several tools are used and the final evaluation is based on a combination of the observed results of a many-faceted evaluation. The tools used and some examples are presented

  6. Methodology of formal software evaluation

    International Nuclear Information System (INIS)

    Tuszynski, J.

    1998-01-01

    Sydkraft AB, the major Swedish utility, owner of ca 6000 MW el installed in nuclear (NPP Barsebaeck and NPP Oskarshamn), fossil fuel and hydro Power Plants is facing modernization of the control systems of the plants. Standards applicable require structured, formal methods for implementation of the control functions in the modem, real time software systems. This presentation introduces implementation methodology as discussed presently at the Sydkraft organisation. The approach suggested is based upon the process of co-operation of three parties taking part in the implementation; owner of the plant, vendor and Quality Assurance (QA) organisation. QA will be based on tools for formal software validation and on systematic gathering by the owner of validated and proved-by-operation control modules for the concern-wide utilisation. (author)

  7. Butterfly valve torque prediction methodology

    International Nuclear Information System (INIS)

    Eldiwany, B.H.; Sharma, V.; Kalsi, M.S.; Wolfe, K.

    1994-01-01

    As part of the Motor-Operated Valve (MOV) Performance Prediction Program, the Electric Power Research Institute has sponsored the development of methodologies for predicting thrust and torque requirements of gate, globe, and butterfly MOVs. This paper presents the methodology that will be used by utilities to calculate the dynamic torque requirements for butterfly valves. The total dynamic torque at any disc position is the sum of the hydrodynamic torque, bearing torque (which is induced by the hydrodynamic force), as well as other small torque components (such as packing torque). The hydrodynamic torque on the valve disc, caused by the fluid flow through the valve, depends on the disc angle, flow velocity, upstream flow disturbances, disc shape, and the disc aspect ratio. The butterfly valve model provides sets of nondimensional flow and torque coefficients that can be used to predict flow rate and hydrodynamic torque throughout the disc stroke and to calculate the required actuation torque and the maximum transmitted torque throughout the opening and closing stroke. The scope of the model includes symmetric and nonsymmetric discs of different shapes and aspects ratios in compressible and incompressible fluid applications under both choked and nonchoked flow conditions. The model features were validated against test data from a comprehensive flowloop and in situ test program. These tests were designed to systematically address the effect of the following parameters on the required torque: valve size, disc shapes and disc aspect ratios, upstream elbow orientation and its proximity, and flow conditions. The applicability of the nondimensional coefficients to valves of different sizes was validated by performing tests on 42-in. valve and a precisely scaled 6-in. model. The butterfly valve model torque predictions were found to bound test data from the flow-loop and in situ testing, as shown in the examples provided in this paper

  8. System Anthropological Psychology: Methodological Foundations

    Directory of Open Access Journals (Sweden)

    Vitaliy Y. Klochko

    2012-01-01

    Full Text Available The article considers methodological foundations of the system anthropologicalpsychology (SAP as a scientific branch developed by a well-represented groupof Siberian scientists. SAP is a theory based on axiomatics of cultural-historicalpsychology of L.S. Vygotsky and transspective analysis as a specially developedmeans to define the tendencies of science developing as a self-organizing system.Transspective analysis has revealed regularities in a constantly growing complexityof professional-psychological thinking along the course of emergence ofscientific cognition. It has proved that the field of modern psychology is shapedby theories constructed with ideation of different grades of complexity. The concept“dynamics of the paradigm of science” is introduced; it allows transitions tobe acknowledged from ordinary-binary logic characteristics of the classical scienceto a binary-ternary logic, adequate to non-classical science and then to aternary-multidimensional logic, which is now at the stage of emergence. The latteris employed in SAP construction. It involves the following basic methodologicalprinciples: the principle of directed (selective interaction and the principle ofgenerative effect of selective interaction. The concept of “complimentary interaction”applied in natural as well as humanitarian sciences is reconsidered in thecontext of psychology. The conclusion is made that the principle of selectivity anddirectedness of interaction is relevant to the whole Universe embracing all kindsof systems including the living ones. Different levels of matter organization representingsemantic structures of various complexity use one and the same principleof meaning making through which the Universe ensures its sustainability asa self-developing phenomenon. This methodology provides an explanation fornature and stages of emergence of multidimensional life space of an individual,which comes as a foundation for generation of such features of

  9. CIAU methodology and BEPU applications

    International Nuclear Information System (INIS)

    Petruzzi, A.; D'Auria, F.

    2009-01-01

    Best-Estimate calculation results from complex thermal-hydraulic system codes (like Relap5, Cathare, Athlet, Trace, etc..) are affected by unavoidable approximations that are unpredictable without the use of computational tools that account for the various sources of uncertainty. Therefore the use of best-estimate codes within the reactor technology, either for design or safety purposes, implies understanding and accepting the limitations and the deficiencies of those codes. Uncertainties may have different origins ranging from the approximation of the models, to the approximation of the numerical solution, and to the lack of precision of the values adopted for boundary and initial conditions. The amount of uncertainty that affects a calculation may strongly depend upon the codes and the modeling techniques (i.e. the code's users). A consistent and robust uncertainty methodology must be developed taking into consideration all the above aspects. The CIAU (Code with the capability of Internal Assessment of Uncertainty) and the UMAE (Uncertainty Methodology based on Accuracy Evaluation) methods have been developed by University of Pisa (UNIPI) in the framework of a long lasting research activities started since 80's and involving several researchers. CIAU is extensively discussed in the available technical literature, Refs. [1, 2, 3, 4, 5, 6, 7], and tens of additional relevant papers, that provide comprehensive details about the method, can be found in the bibliography lists of the above references. Therefore, the present paper supplies only 'spot-information' about CIAU and focuses mostly on the applications to some cases of industrial interest. In particular the application of CIAU to the OECD BEMUSE (Best Estimate Methods Uncertainty and Sensitivity Evaluation, [8, 9]) project is discussed and a critical comparison respect with other uncertainty methods (in relation to items like: sources of uncertainties, selection of the input parameters and quantification of

  10. The Methodological Dynamism of Grounded Theory

    Directory of Open Access Journals (Sweden)

    Nicholas Ralph

    2015-11-01

    Full Text Available Variations in grounded theory (GT interpretation are the subject of ongoing debate. Divergences of opinion, genres, approaches, methodologies, and methods exist, resulting in disagreement on what GT methodology is and how it comes to be. From the postpositivism of Glaser and Strauss, to the symbolic interactionist roots of Strauss and Corbin, through to the constructivism of Charmaz, the field of GT methodology is distinctive in the sense that those using it offer new ontological, epistemological, and methodological perspectives at specific moments in time. We explore the unusual dynamism attached to GT’s underpinnings. Our view is that through a process of symbolic interactionism, in which generations of researchers interact with their context, moments are formed and philosophical perspectives are interpreted in a manner congruent with GT’s essential methods. We call this methodological dynamism, a process characterized by contextual awareness and moment formation, contemporaneous translation, generational methodology, and methodological consumerism.

  11. Climate index for Switzerland - Methodology

    International Nuclear Information System (INIS)

    2006-01-01

    According to the U.S. Department of Energy, an estimated 25% of the GNP is affected by weather-related events. The variations in temperature - even small ones - can also have long-lasting effects on the operational results of a company. Among other, the Energy supply sector is sensitive to weather risks: a milder or harsher than usual winter leads to a decrease or increase of energy consumption. The price of electricity on power trading facilities like Powernext is especially sensitive to odd changes in temperatures. Powernext and Meteo-France (the French meteorological agency) have joined expertise in order to promote the use of weather indices in term of decision making or underlying of hedging tools to energy actors, end users from any other sector of activity and specialists of the weather risk hedging. The Powernext Weather indices are made from information collected by Meteo-France's main observation network according to the norms of international meteorology, in areas carefully selected. The gross data are submitted to a thorough review allowing the correction of abnormalities and the reconstitution of missing data. Each index is fashioned to take into account the economic activity in the various regions of the country as represented by each region's population. This demographic information represents a fair approximation of the weight of the regional economic activity. This document presents the calculation methodology of average, minimum and maximum weather indexes with the winter and summer regression equations for the different economical regions of Switzerland. (J.S.)

  12. Methodology of site protection studies

    International Nuclear Information System (INIS)

    Farges, L.

    1980-01-01

    Preliminary studies preceding building of a nuclear facility aim at assessing the choice of a site and establishing operating and control procedures. These studies are of two types. Studies on the impact of environment on the nuclear facility to be constructed form one type and studies on the impact of nuclear facilities on the environment form the second type. A methodology giving a framework to studies of second type is presented. These studies are undertaken to choose suitable sites for nuclear facilities. After a preliminary selection of a site based on the first estimate, a detailed site study is undertaken. The procedure for this consists of five successive phases, namely, (1) an inquiry assessing the initial state of the site, (2) an initial synthesis of accumulated information for assessing the health and safety consequences of releases, (3) laboratory and field studies simulating the movement of waste products for a quantitative assessment of effects, (4) final synthesis for laying down the release limits and radiological control methods, and (5) conclusions based on comparing the data of final synthesis to the limits prescribed by regulations. These five phases are outlined. Role of periodic reassessments after the facility is in operation for same time is explained. (M.G.B.)

  13. Climate index for Belgium - Methodology

    International Nuclear Information System (INIS)

    2006-01-01

    According to the U.S. Department of Energy, an estimated 25% of the GNP is affected by weather-related events. The variations in temperature - even small ones - can also have long-lasting effects on the operational results of a company. Among other, the Energy supply sector is sensitive to weather risks: a milder or harsher than usual winter leads to a decrease or increase of energy consumption. The price of electricity on power trading facilities like Powernext is especially sensitive to odd changes in temperatures. Powernext and Meteo-France (the French meteorological agency) have joined expertise in order to promote the use of weather indices in term of decision making or underlying of hedging tools to energy actors, end users from any other sector of activity and specialists of the weather risk hedging. The Powernext Weather indices are made from information collected by Meteo-France's main observation network according to the norms of international meteorology, in areas carefully selected. The gross data are submitted to a thorough review allowing the correction of abnormalities and the reconstitution of missing data. Each index is fashioned to take into account the economic activity in the various regions of the country as represented by each region's population. This demographic information represents a fair approximation of the weight of the regional economic activity. This document presents the calculation methodology of average, minimum and maximum weather indexes with the winter and summer regression equations for the different economical regions of Belgium. (J.S.)

  14. Zika detection: comparison of methodologies

    Directory of Open Access Journals (Sweden)

    Tatiana Elias Colombo

    Full Text Available ABSTRACT Many countries in the Americas have detected local transmission of multiple arboviruses that cause febrile illnesses. Therefore, laboratory testing has become an important tool for confirming the etiology of these diseases. The present study aimed to compare the sensitivity and specificity of three different Zika virus detection assays. One hundred serum samples from patients presenting with acute febrile symptoms were tested using a previously reported TaqMan® RT-qPCR assay. We used a SYBR® Green RT-qPCR and a conventional PCR methodologies to compare the results. Of the samples that were determined to be negative by the TaqMan® RT-qPCR assay, 100% (Kappa = 0.670 were also found to be negative by SYBR® Green RT-qPCR based on Tm comparison; however, 14% (Kappa = 0.035 were found to be positive by conventional PCR followed by agarose gel electrophoresis. The differences between the ZIKV strains circulating worldwide and the low viremia period can compromise diagnostic accuracy and thereby the accuracy of outbreak data. Therefore, improved assays are required to improve the diagnosis and surveillance of arbovirus.

  15. Climate index for Portugal - Methodology

    International Nuclear Information System (INIS)

    2006-01-01

    According to the U.S. Department of Energy, an estimated 25% of the GNP is affected by weather-related events. The variations in temperature - even small ones - can also have long-lasting effects on the operational results of a company. Among other, the Energy supply sector is sensitive to weather risks: a milder or harsher than usual winter leads to a decrease or increase of energy consumption. The price of electricity on power trading facilities like Powernext is especially sensitive to odd changes in temperatures. Powernext and Meteo-France (the French meteorological agency) have joined expertise in order to promote the use of weather indices in term of decision making or underlying of hedging tools to energy actors, end users from any other sector of activity and specialists of the weather risk hedging. The Powernext Weather indices are made from information collected by Meteo-France's main observation network according to the norms of international meteorology, in areas carefully selected. The gross data are submitted to a thorough review allowing the correction of abnormalities and the reconstitution of missing data. Each index is fashioned to take into account the economic activity in the various regions of the country as represented by each region's population. This demographic information represents a fair approximation of the weight of the regional economic activity. This document presents the calculation methodology of average, minimum and maximum weather indexes with the winter and summer regression equations for the different economical regions of Portugal. (J.S.)

  16. Methodological Aspects of Architectural Documentation

    Directory of Open Access Journals (Sweden)

    Arivaldo Amorim

    2011-12-01

    Full Text Available This paper discusses the methodological approach that is being developed in the state of Bahia in Brazil since 2003, in architectural and urban sites documentation, using extensive digital technologies. Bahia has a vast territory with important architectural ensembles ranging from the sixteenth century to present day. As part of this heritage is constructed of raw earth and wood, it is very sensitive to various deleterious agents. It is therefore critical document this collection that is under threats. To conduct those activities diverse digital technologies that could be used in documentation process are being experimented. The task is being developed as an academic research, with few financial resources, by scholarship students and some volunteers. Several technologies are tested ranging from the simplest to the more sophisticated ones, used in the main stages of the documentation project, as follows: work overall planning, data acquisition, processing and management and ultimately, to control and evaluate the work. The activities that motivated this paper are being conducted in the cities of Rio de Contas and Lençóis in the Chapada Diamantina, located at 420 km and 750 km from Salvador respectively, in Cachoeira city at Recôncavo Baiano area, 120 km from Salvador, the capital of Bahia state, and at Pelourinho neighbourhood, located in the historic capital. Part of the material produced can be consulted in the website: < www.lcad.ufba.br>.

  17. Methodology of a systematic review.

    Science.gov (United States)

    Linares-Espinós, E; Hernández, V; Domínguez-Escrig, J L; Fernández-Pello, S; Hevia, V; Mayor, J; Padilla-Fernández, B; Ribal, M J

    2018-05-03

    The objective of evidence-based medicine is to employ the best scientific information available to apply to clinical practice. Understanding and interpreting the scientific evidence involves understanding the available levels of evidence, where systematic reviews and meta-analyses of clinical trials are at the top of the levels-of-evidence pyramid. The review process should be well developed and planned to reduce biases and eliminate irrelevant and low-quality studies. The steps for implementing a systematic review include (i) correctly formulating the clinical question to answer (PICO), (ii) developing a protocol (inclusion and exclusion criteria), (iii) performing a detailed and broad literature search and (iv) screening the abstracts of the studies identified in the search and subsequently of the selected complete texts (PRISMA). Once the studies have been selected, we need to (v) extract the necessary data into a form designed in the protocol to summarise the included studies, (vi) assess the biases of each study, identifying the quality of the available evidence, and (vii) develop tables and text that synthesise the evidence. A systematic review involves a critical and reproducible summary of the results of the available publications on a particular topic or clinical question. To improve scientific writing, the methodology is shown in a structured manner to implement a systematic review. Copyright © 2018 AEU. Publicado por Elsevier España, S.L.U. All rights reserved.

  18. Climate index for France - Methodology

    International Nuclear Information System (INIS)

    2006-01-01

    According to the U.S. Department of Energy, an estimated 25% of the GNP is affected by weather-related events. The variations in temperature - even small ones - can also have long-lasting effects on the operational results of a company. Among other, the Energy supply sector is sensitive to weather risks: a milder or harsher than usual winter leads to a decrease or increase of energy consumption. The price of electricity on power trading facilities like Powernext is especially sensitive to odd changes in temperatures. Powernext and Meteo-France (the French meteorological agency) have joined expertise in order to promote the use of weather indices in term of decision making or underlying of hedging tools to energy actors, end users from any other sector of activity and specialists of the weather risk hedging. The Powernext Weather indices are made from information collected by Meteo-France's main observation network according to the norms of international meteorology, in areas carefully selected. The gross data are submitted to a thorough review allowing the correction of abnormalities and the reconstitution of missing data. Each index is fashioned to take into account the economic activity in the various regions of the country as represented by each region's population. This demographic information represents a fair approximation of the weight of the regional economic activity. This document presents the calculation methodology of average, minimum and maximum weather indexes with the winter and summer regression equations for the different economical regions of France. (J.S.)

  19. Waste Package Design Methodology Report

    Energy Technology Data Exchange (ETDEWEB)

    D.A. Brownson

    2001-09-28

    The objective of this report is to describe the analytical methods and processes used by the Waste Package Design Section to establish the integrity of the various waste package designs, the emplacement pallet, and the drip shield. The scope of this report shall be the methodology used in criticality, risk-informed, shielding, source term, structural, and thermal analyses. The basic features and appropriateness of the methods are illustrated, and the processes are defined whereby input values and assumptions flow through the application of those methods to obtain designs that ensure defense-in-depth as well as satisfy requirements on system performance. Such requirements include those imposed by federal regulation, from both the U.S. Department of Energy (DOE) and U.S. Nuclear Regulatory Commission (NRC), and those imposed by the Yucca Mountain Project to meet repository performance goals. The report is to be used, in part, to describe the waste package design methods and techniques to be used for producing input to the License Application Report.

  20. Methodological Issues in Questionnaire Design.

    Science.gov (United States)

    Song, Youngshin; Son, Youn Jung; Oh, Doonam

    2015-06-01

    The process of designing a questionnaire is complicated. Many questionnaires on nursing phenomena have been developed and used by nursing researchers. The purpose of this paper was to discuss questionnaire design and factors that should be considered when using existing scales. Methodological issues were discussed, such as factors in the design of questions, steps in developing questionnaires, wording and formatting methods for items, and administrations methods. How to use existing scales, how to facilitate cultural adaptation, and how to prevent socially desirable responding were discussed. Moreover, the triangulation method in questionnaire development was introduced. Steps were recommended for designing questions such as appropriately operationalizing key concepts for the target population, clearly formatting response options, generating items and confirming final items through face or content validity, sufficiently piloting the questionnaire using item analysis, demonstrating reliability and validity, finalizing the scale, and training the administrator. Psychometric properties and cultural equivalence should be evaluated prior to administration when using an existing questionnaire and performing cultural adaptation. In the context of well-defined nursing phenomena, logical and systematic methods will contribute to the development of simple and precise questionnaires.

  1. Waste Package Design Methodology Report

    International Nuclear Information System (INIS)

    D.A. Brownson

    2001-01-01

    The objective of this report is to describe the analytical methods and processes used by the Waste Package Design Section to establish the integrity of the various waste package designs, the emplacement pallet, and the drip shield. The scope of this report shall be the methodology used in criticality, risk-informed, shielding, source term, structural, and thermal analyses. The basic features and appropriateness of the methods are illustrated, and the processes are defined whereby input values and assumptions flow through the application of those methods to obtain designs that ensure defense-in-depth as well as satisfy requirements on system performance. Such requirements include those imposed by federal regulation, from both the U.S. Department of Energy (DOE) and U.S. Nuclear Regulatory Commission (NRC), and those imposed by the Yucca Mountain Project to meet repository performance goals. The report is to be used, in part, to describe the waste package design methods and techniques to be used for producing input to the License Application Report

  2. Climate index for Spain - Methodology

    International Nuclear Information System (INIS)

    2006-01-01

    According to the U.S. Department of Energy, an estimated 25% of the GNP is affected by weather-related events. The variations in temperature - even small ones - can also have long-lasting effects on the operational results of a company. Among other, the Energy supply sector is sensitive to weather risks: a milder or harsher than usual winter leads to a decrease or increase of energy consumption. The price of electricity on power trading facilities like Powernext is especially sensitive to odd changes in temperatures. Powernext and Meteo-France (the French meteorological agency) have joined expertise in order to promote the use of weather indices in term of decision making or underlying of hedging tools to energy actors, end users from any other sector of activity and specialists of the weather risk hedging. The Powernext Weather indices are made from information collected by Meteo-France's main observation network according to the norms of international meteorology, in areas carefully selected. The gross data are submitted to a thorough review allowing the correction of abnormalities and the reconstitution of missing data. Each index is fashioned to take into account the economic activity in the various regions of the country as represented by each region's population. This demographic information represents a fair approximation of the weight of the regional economic activity. This document presents the calculation methodology of average, minimum and maximum weather indexes with the winter and summer regression equations for the different economical regions of Spain. (J.S.)

  3. Open Government Data Publication Methodology

    Directory of Open Access Journals (Sweden)

    Jan Kucera

    2015-04-01

    Full Text Available Public sector bodies hold a significant amount of data that might be of potential interest to citizens and businesses. However the re-use potential of this data is still largely untapped because the data is not always published in a way that would allow its easy discovery, understanding and re-use. Open Government Data (OGD initiatives aim at increasing availability of machine-readable data provided under an open license and therefore these initiatives might facilitate re-use of the government data which in turn might lead to increased transparency and economic growth. However the recent studies show that still only a portion of data provided by the public sector bodies is truly open. Public sector bodies face a number of challenges when publishing OGD and they need to address the relevant risks. Therefore there is a need for best practices and methodologies for publication of OGD that would provide the responsible persons with a clear guidance on how the OGD initiatives should be implemented and how the known challenges and risks should be addressed.

  4. Safety analysis methodology for OPR 1000

    International Nuclear Information System (INIS)

    Hwang-Yong, Jun

    2005-01-01

    Full text: Korea Electric Power Research Institute (KEPRI) has been developing inhouse safety analysis methodology based on the delicate codes available to KEPRI to overcome the problems arising from currently used vendor oriented methodologies. For the Loss of Coolant Accident (LOCA) analysis, the KREM (KEPRI Realistic Evaluation Methodology) has been developed based on the RELAP-5 code. The methodology was approved for the Westinghouse 3-loop plants by the Korean regulatory organization and the project to extent the methodology to the Optimized Power Reactor 1000 (OPR1000) has been ongoing since 2001. Also, for the Non-LOCA analysis, the KNAP (Korea Non-LOCA Analysis Package) has been developed using the UNICORN-TM code system. To demonstrate the feasibility of these codes systems and methodologies, some typical cases of the design basis accidents mentioned in the final safety analysis report (FSAR) were analyzed. (author)

  5. Tourism Methodologies - New Perspectives, Practices and Procedures

    DEFF Research Database (Denmark)

    This volume offers methodological discussions within the multidisciplinary field of tourism and shows how tourism researchers develop and apply new tourism methodologies. The book is presented as an anthology, giving voice to many diverse researchers who reflect on tourism methodology in differen...... codings and analysis, and tapping into the global network of social media.......This volume offers methodological discussions within the multidisciplinary field of tourism and shows how tourism researchers develop and apply new tourism methodologies. The book is presented as an anthology, giving voice to many diverse researchers who reflect on tourism methodology in different...... in interview and field work situations, and how do we engage with the performative aspects of tourism as a field of study? The book acknowledges that research is also performance and that it constitutes an aspect of intervention in the situations and contexts it is trying to explore. This is an issue dealt...

  6. Constructivism: a naturalistic methodology for nursing inquiry.

    Science.gov (United States)

    Appleton, J V; King, L

    1997-12-01

    This article will explore the philosophical underpinnings of the constructivist research paradigm. Despite its increasing popularity in evaluative health research studies there is limited recognition of constructivism in popular research texts. Lincoln and Guba's original approach to constructivist methodology is outlined and a detailed framework for nursing research is offered. Fundamental issues and concerns surrounding this methodology are debated and differences between method and methodology are highlighted.

  7. The GPT methodology. New fields of application

    International Nuclear Information System (INIS)

    Gandini, A.; Gomit, J.M.; Abramytchev, V.

    1996-01-01

    The GPT (Generalized Perturbation Theory) methodology is described, and a new application is discussed. The results obtained for a simple model (zero dimension, six parameters of interest) show that the expressions obtained using the GPT methodology, lead to results close to those obtained through direct calculations. The GPT methodology is useful to be used for radioactive waste disposal problems. The potentiality of the method linked to zero dimension model can be extended to radionuclide migration problems with space description. (K.A.)

  8. Methodology for Validating Building Energy Analysis Simulations

    Energy Technology Data Exchange (ETDEWEB)

    Judkoff, R.; Wortman, D.; O' Doherty, B.; Burch, J.

    2008-04-01

    The objective of this report was to develop a validation methodology for building energy analysis simulations, collect high-quality, unambiguous empirical data for validation, and apply the validation methodology to the DOE-2.1, BLAST-2MRT, BLAST-3.0, DEROB-3, DEROB-4, and SUNCAT 2.4 computer programs. This report covers background information, literature survey, validation methodology, comparative studies, analytical verification, empirical validation, comparative evaluation of codes, and conclusions.

  9. Current trends in Bayesian methodology with applications

    CERN Document Server

    Upadhyay, Satyanshu K; Dey, Dipak K; Loganathan, Appaia

    2015-01-01

    Collecting Bayesian material scattered throughout the literature, Current Trends in Bayesian Methodology with Applications examines the latest methodological and applied aspects of Bayesian statistics. The book covers biostatistics, econometrics, reliability and risk analysis, spatial statistics, image analysis, shape analysis, Bayesian computation, clustering, uncertainty assessment, high-energy astrophysics, neural networking, fuzzy information, objective Bayesian methodologies, empirical Bayes methods, small area estimation, and many more topics.Each chapter is self-contained and focuses on

  10. Formalizing the ISDF Software Development Methodology

    OpenAIRE

    Mihai Liviu DESPA

    2015-01-01

    The paper is aimed at depicting the ISDF software development methodology by emphasizing quality management and software development lifecycle. The ISDF methodology was built especially for innovative software development projects. The ISDF methodology was developed empirically by trial and error in the process of implementing multiple innovative projects. The research process began by analysing key concepts like innovation and software development and by settling the important dilemma of wha...

  11. THE FUTURE OF LANGUAGE TEACHING METHODOLOGY

    OpenAIRE

    Ted Rodgers

    1998-01-01

    Abstract : This paper reviews the current state of ELT methodology, particulary in respect to a number of current views suggesting that the profession is now in a "post-methods" era in which previous attention to Methods (Total Physical Response, Silent Way, Natural Approach, etc.) has given way to a more generic approach to ELT methodology. Ten potential future courses of ELT methodology are outlines and three of these are considered in some detail. Particular consideration is given as to ho...

  12. Formalizing the ISDF Software Development Methodology

    Directory of Open Access Journals (Sweden)

    Mihai Liviu DESPA

    2015-01-01

    Full Text Available The paper is aimed at depicting the ISDF software development methodology by emphasizing quality management and software development lifecycle. The ISDF methodology was built especially for innovative software development projects. The ISDF methodology was developed empirically by trial and error in the process of implementing multiple innovative projects. The research process began by analysing key concepts like innovation and software development and by settling the important dilemma of what makes a web application innovative. Innovation in software development is presented from the end-user, project owner and project manager’s point of view. The main components of a software development methodology are identified. Thus a software development methodology should account for people, roles, skills, teams, tools, techniques, processes, activities, standards, quality measuring tools, and team values. Current software development models are presented and briefly analysed. The need for a dedicated innovation oriented software development methodology is emphasized by highlighting shortcomings of current software development methodologies when tackling innovation. The ISDF methodology is presented in the context of developing an actual application. The ALHPA application is used as a case study for emphasizing the characteristics of the ISDF methodology. The development life cycle of the ISDF methodology includes research, planning, prototyping, design, development, testing, setup and maintenance. Artefacts generated by the ISDF methodology are presented. Quality is managed in the ISDF methodology by assessing compliance, usability, reliability, repeatability, availability and security. In order to properly asses each quality component a dedicated indicator is built. A template for interpreting each indicator is provided. Conclusions are formulated and new related research topics are submitted for debate.

  13. Library Design-Facilitated High-Throughput Sequencing of Synthetic Peptide Libraries.

    Science.gov (United States)

    Vinogradov, Alexander A; Gates, Zachary P; Zhang, Chi; Quartararo, Anthony J; Halloran, Kathryn H; Pentelute, Bradley L

    2017-11-13

    A methodology to achieve high-throughput de novo sequencing of synthetic peptide mixtures is reported. The approach leverages shotgun nanoliquid chromatography coupled with tandem mass spectrometry-based de novo sequencing of library mixtures (up to 2000 peptides) as well as automated data analysis protocols to filter away incorrect assignments, noise, and synthetic side-products. For increasing the confidence in the sequencing results, mass spectrometry-friendly library designs were developed that enabled unambiguous decoding of up to 600 peptide sequences per hour while maintaining greater than 85% sequence identification rates in most cases. The reliability of the reported decoding strategy was additionally confirmed by matching fragmentation spectra for select authentic peptides identified from library sequencing samples. The methods reported here are directly applicable to screening techniques that yield mixtures of active compounds, including particle sorting of one-bead one-compound libraries and affinity enrichment of synthetic library mixtures performed in solution.

  14. Digital One Disc One Compound Method for High Throughput Discovery of Prostate Cancer Targeting Ligands

    Science.gov (United States)

    2016-12-01

    efficiency of drug discovery and make a potential impact on modern pharmaceutical industries . 15. SUBJECT TERMS ODOC carriers, barcode, split-mix...approach4-7. Array technologies can construct high density of molecules in an array format on a solid substrate (microchip), from which the chemical...and-play microfluidic packaging scheme, known as Microflego – 3D Microfluidic Assembly, to facilely establish complex 3D microfluidic networks using

  15. Probabilistic methodology for turbine missile risk analysis

    International Nuclear Information System (INIS)

    Twisdale, L.A.; Dunn, W.L.; Frank, R.A.

    1984-01-01

    A methodology has been developed for estimation of the probabilities of turbine-generated missile damage to nuclear power plant structures and systems. Mathematical models of the missile generation, transport, and impact events have been developed and sequenced to form an integrated turbine missile simulation methodology. Probabilistic Monte Carlo techniques are used to estimate the plant impact and damage probabilities. The methodology has been coded in the TURMIS computer code to facilitate numerical analysis and plant-specific turbine missile probability assessments. Sensitivity analyses have been performed on both the individual models and the integrated methodology, and probabilities have been estimated for a hypothetical nuclear power plant case study. (orig.)

  16. A development methodology for scientific software

    International Nuclear Information System (INIS)

    Cort, G.; Barrus, D.M.; Goldstone, J.A.; Miller, L.; Nelson, R.O.; Poore, R.V.

    1985-01-01

    We present the details of a software development methodology that addresses all phases of the software life cycle, yet is well suited for application by small projects with limited resources. The methodology has been developed at the Los Alamos Weapons Neutron Research (WNR) Facility and was utilized during the recent development of the WNR Data Acquisition Command Language. The methodology emphasizes the development and maintenance of comprehensive documentation for all software components. The impact of the methodology upon software quality and programmer productivity is assessed

  17. Methodological issues of genetic association studies.

    Science.gov (United States)

    Simundic, Ana-Maria

    2010-12-01

    Genetic association studies explore the association between genetic polymorphisms and a certain trait, disease or predisposition to disease. It has long been acknowledged that many genetic association studies fail to replicate their initial positive findings. This raises concern about the methodological quality of these reports. Case-control genetic association studies often suffer from various methodological flaws in study design and data analysis, and are often reported poorly. Flawed methodology and poor reporting leads to distorted results and incorrect conclusions. Many journals have adopted guidelines for reporting genetic association studies. In this review, some major methodological determinants of genetic association studies will be discussed.

  18. Evolution of aging assessment methodologies

    International Nuclear Information System (INIS)

    McCrea, L.; Dam, R.; Gold, R.

    2011-01-01

    Under the influence of organizations like the IAEA and INPO the expectations of the regulator and plant operators alike are driving the evolution of aging assessment methodologies. The key result is that these assessments need to be executed more efficiently while supporting risk informed thinking within a living process. Some recent trends impacting aging assessments include new standards from the regulator requiring more frequent updates of aging assessments (RD-334), and broader component coverage driven by equipment reliability program demands (INPO AP-913). These trends point to the need to be able to do aging assessment more efficiently, and to manage the configuration. Some of the challenges include increasing efficiency while maintaining completeness and minimizing error, employing a systematic, well defined approach while maintaining the flexibility to apply the right level of effort to achieve desired results, and in particular, assuring that Aging Related Degradation Mechanisms (ARDMs) are sufficiently addressed. Meeting these needs creates a natural synergy with the Preventive Maintenance living program and therefore lends itself to a more integrated approach. To support this program, the SYSTMSTM software has been enhanced to accommodate for the various facets of an integrated program while meeting the needs described above. The systematic processes in SYSTMS are built with the vision of supporting risk-informed decision making as part of a larger risk-based functional tools suite. This paper intends to show how the utilities can benefit from the cost savings associated with increased assessment efficiency, and utilizing Candu Energy Inc.'s CANDU-specific knowledge-base and experience in aging assessment to get it right the first time. (author)

  19. Regional indexes for France. Methodology

    International Nuclear Information System (INIS)

    2006-01-01

    According to the U.S. Department of Energy, an estimated 25% of the GNP is affected by weather-related events. The variations in temperature - even small ones - can also have long-lasting effects on the operational results of a company. Among other, the Energy supply sector is sensitive to weather risks: a milder or harsher than usual winter leads to a decrease or increase of energy consumption. The price of electricity on power trading facilities like Powernext is especially sensitive to odd changes in temperatures. Powernext and Meteo-France (the French meteorological agency) have joined expertise in order to promote the use of weather indices in term of decision making or underlying of hedging tools to energy actors, end users from any other sector of activity and specialists of the weather risk hedging. The Powernext Weather indices are made from information collected by Meteo-France's main observation network according to the norms of international meteorology, in areas carefully selected. The gross data are submitted to a thorough review allowing the correction of abnormalities and the reconstitution of missing data. Each index is fashioned to take into account the economic activity in the various regions of the country as represented by each region's population. This demographic information represents a fair approximation of the weight of the regional economic activity. This document presents the calculation methodology of regional weather indexes for France. Each regional index covers an homogenous area in terms of temperature represented by the biggest city. Five reference cities are used to represent the 22 economical regions of France (Paris Orly, Lyon, Marignane, Bordeaux and Strasbourg). (J.S.)

  20. Evolution of aging assessment methodologies

    Energy Technology Data Exchange (ETDEWEB)

    McCrea, L.; Dam, R.; Gold, R. [Candu Energy Inc., Mississauga, Ontario (Canada)

    2011-07-01

    Under the influence of organizations like the IAEA and INPO the expectations of the regulator and plant operators alike are driving the evolution of aging assessment methodologies. The key result is that these assessments need to be executed more efficiently while supporting risk informed thinking within a living process. Some recent trends impacting aging assessments include new standards from the regulator requiring more frequent updates of aging assessments (RD-334), and broader component coverage driven by equipment reliability program demands (INPO AP-913). These trends point to the need to be able to do aging assessment more efficiently, and to manage the configuration. Some of the challenges include increasing efficiency while maintaining completeness and minimizing error, employing a systematic, well defined approach while maintaining the flexibility to apply the right level of effort to achieve desired results, and in particular, assuring that Aging Related Degradation Mechanisms (ARDMs) are sufficiently addressed. Meeting these needs creates a natural synergy with the Preventive Maintenance living program and therefore lends itself to a more integrated approach. To support this program, the SYSTMSTM software has been enhanced to accommodate for the various facets of an integrated program while meeting the needs described above. The systematic processes in SYSTMS are built with the vision of supporting risk-informed decision making as part of a larger risk-based functional tools suite. This paper intends to show how the utilities can benefit from the cost savings associated with increased assessment efficiency, and utilizing Candu Energy Inc.'s CANDU-specific knowledge-base and experience in aging assessment to get it right the first time. (author)

  1. Causal Meta-Analysis : Methodology and Applications

    NARCIS (Netherlands)

    Bax, L.J.

    2009-01-01

    Meta-analysis is a statistical method to summarize research data from multiple studies in a quantitative manner. This dissertation addresses a number of methodological topics in causal meta-analysis and reports the development and validation of meta-analysis software. In the first (methodological)

  2. Systematic Review Methodology in Higher Education

    Science.gov (United States)

    Bearman, Margaret; Smith, Calvin D.; Carbone, Angela; Slade, Susan; Baik, Chi; Hughes-Warrington, Marnie; Neumann, David L.

    2012-01-01

    Systematic review methodology can be distinguished from narrative reviews of the literature through its emphasis on transparent, structured and comprehensive approaches to searching the literature and its requirement for formal synthesis of research findings. There appears to be relatively little use of the systematic review methodology within the…

  3. Disposal Criticality Analysis Methodology Topical Report

    International Nuclear Information System (INIS)

    Horton, D.G.

    1998-01-01

    The fundamental objective of this topical report is to present the planned risk-informed disposal criticality analysis methodology to the NRC to seek acceptance that the principles of the methodology and the planned approach to validating the methodology are sound. The design parameters and environmental assumptions within which the waste forms will reside are currently not fully established and will vary with the detailed waste package design, engineered barrier design, repository design, and repository layout. Therefore, it is not practical to present the full validation of the methodology in this report, though a limited validation over a parameter range potentially applicable to the repository is presented for approval. If the NRC accepts the methodology as described in this section, the methodology will be fully validated for repository design applications to which it will be applied in the License Application and its references. For certain fuel types (e.g., intact naval fuel), a ny processes, criteria, codes or methods different from the ones presented in this report will be described in separate addenda. These addenda will employ the principles of the methodology described in this report as a foundation. Departures from the specifics of the methodology presented in this report will be described in the addenda

  4. PSA methodology development and application in Japan

    International Nuclear Information System (INIS)

    Kazuo Sato; Toshiaki Tobioka; Kiyoharu Abe

    1987-01-01

    The outlines of Japanese activities on development and application of probabilistic safety assessment (PSA) methodologies are described. First the activities on methodology development are described for system reliability analysis, operational data analysis, core melt accident analysis, environmental consequence analysis and seismic risk analysis. Then the methodoligy application examples by the regulatory side and the industry side are described. (author)

  5. Developing educational hypermedia applications: a methodological approach

    Directory of Open Access Journals (Sweden)

    Jose Miguel Nunes

    1996-01-01

    Full Text Available This paper proposes an hypermedia development methodology with the aim of integrating the work of both educators, who will be primarily responsible for the instructional design, with that of software experts, responsible for the software design and development. Hence, it is proposed that the educators and programmers should interact in an integrated and systematic manner following a methodological approach.

  6. Design Methodologies: Industrial and Educational Applications

    NARCIS (Netherlands)

    Tomiyama, T.; Gul, P.; Jin, Y.; Lutters, Diederick; Kind, Ch.; Kimura, F.

    2009-01-01

    The field of Design Theory and Methodology has a rich collection of research results that has been taught at educational institutions as well as applied to design practices. First, this keynote paper describes some methods to classify them. It then illustrates individual theories and methodologies

  7. Screening radon risks: A methodology for policymakers

    International Nuclear Information System (INIS)

    Eisinger, D.S.; Simmons, R.A.; Lammering, M.; Sotiros, R.

    1991-01-01

    This paper provides an easy-to-use screening methodology to estimate potential excess lifetime lung cancer risk resulting from indoor radon exposure. The methodology was developed under U.S. EPA Office of Policy, Planning, and Evaluation sponsorship of the agency's Integrated Environmental Management Projects (IEMP) and State/Regional Comparative Risk Projects. These projects help policymakers understand and use scientific data to develop environmental problem-solving strategies. This research presents the risk assessment methodology, discusses its basis, and identifies appropriate applications. The paper also identifies assumptions built into the methodology and qualitatively addresses methodological uncertainties, the direction in which these uncertainties could bias analyses, and their relative importance. The methodology draws from several sources, including risk assessment formulations developed by the U.S. EPA's Office of Radiation Programs, the EPA's Integrated Environmental Management Project (Denver), the International Commission on Radiological Protection, and the National Institute for Occupational Safety and Health. When constructed as a spreadsheet program, the methodology easily facilitates analyses and sensitivity studies (the paper includes several sensitivity study options). The methodology will be most helpful to those who need to make decisions concerning radon testing, public education, and exposure prevention and mitigation programs.26 references

  8. A new Methodology for Operations Strategy

    DEFF Research Database (Denmark)

    Koch, Christian; Rytter, Niels Gorm; Boer, Harry

    2005-01-01

    This paper proposes a new methodology for developing and implementing Operations Strategy (OS). It encompasses both content and process aspects of OS and differs thereby from many of the present OS methodologies. The paper outlines its paradigmatic foundation and presents aim, process, dimensions...

  9. Comparative study on software development methodologies

    Directory of Open Access Journals (Sweden)

    Mihai Liviu DESPA

    2014-12-01

    Full Text Available This paper focuses on the current state of knowledge in the field of software development methodologies. It aims to set the stage for the formalization of a software development methodology dedicated to innovation orientated IT projects. The paper starts by depicting specific characteristics in software development project management. Managing software development projects involves techniques and skills that are proprietary to the IT industry. Also the software development project manager handles challenges and risks that are predominantly encountered in business and research areas that involve state of the art technology. Conventional software development stages are defined and briefly described. Development stages are the building blocks of any software development methodology so it is important to properly research this aspect. Current software development methodologies are presented. Development stages are defined for every showcased methodology. For each methodology a graphic representation is illustrated in order to better individualize its structure. Software development methodologies are compared by highlighting strengths and weaknesses from the stakeholder's point of view. Conclusions are formulated and a research direction aimed at formalizing a software development methodology dedicated to innovation orientated IT projects is enunciated.

  10. Solid Waste Management Planning--A Methodology

    Science.gov (United States)

    Theisen, Hilary M.; And Others

    1975-01-01

    This article presents a twofold solid waste management plan consisting of a basic design methodology and a decision-making methodology. The former provides a framework for the developing plan while the latter builds flexibility into the design so that there is a model for use during the planning process. (MA)

  11. Disposal Criticality Analysis Methodology Topical Report

    International Nuclear Information System (INIS)

    D.G. Horton

    1998-01-01

    The fundamental objective of this topical report is to present the planned risk-informed disposal criticality analysis methodology to the NRC to seek acceptance that the principles of the methodology and the planned approach to validating the methodology are sound. The design parameters and environmental assumptions within which the waste forms will reside are currently not fully established and will vary with the detailed waste package design, engineered barrier design, repository design, and repository layout. Therefore, it is not practical to present the full validation of the methodology in this report, though a limited validation over a parameter range potentially applicable to the repository is presented for approval. If the NRC accepts the methodology as described in this section, the methodology will be fully validated for repository design applications to which it will be applied in the License Application and its references. For certain fuel types (e.g., intact naval fuel), any processes, criteria, codes or methods different from the ones presented in this report will be described in separate addenda. These addenda will employ the principles of the methodology described in this report as a foundation. Departures from the specifics of the methodology presented in this report will be described in the addenda

  12. Generalized Response Surface Methodology : A New Metaheuristic

    NARCIS (Netherlands)

    Kleijnen, J.P.C.

    2006-01-01

    Generalized Response Surface Methodology (GRSM) is a novel general-purpose metaheuristic based on Box and Wilson.s Response Surface Methodology (RSM).Both GRSM and RSM estimate local gradients to search for the optimal solution.These gradients use local first-order polynomials.GRSM, however, uses

  13. 24 CFR 904.205 - Training methodology.

    Science.gov (United States)

    2010-04-01

    ... Training methodology. Equal in importance to the content of the pre- and post-occupancy training is the training methodology. Because groups vary, there should be adaptability in the communication and learning experience. Methods to be utilized may include group presentations, small discussion groups, special classes...

  14. Identification and systems methodologies for territorial delimitation

    Directory of Open Access Journals (Sweden)

    Iván Montoya R

    2010-12-01

    Full Text Available This document identifies the main issues affecting the delimitation of territories and explores the conceptual approaches for describing the relationship of the territories understood as organizations with their environment. Subsequently, we studied the systems methodologies known as soft systems methodology, SSM, and complex adaptive systems, CAS. Finally, the advantages of systemic approaches to territorial delimitation are shown

  15. Discipline and Methodology in Higher Education Research

    Science.gov (United States)

    Tight, Malcolm

    2013-01-01

    Higher education research is a multidisciplinary field, engaging researchers from across the academy who make use of a wide range of methodological approaches. This article examines the relation between discipline and methodology in higher education research, analysing a database of 567 articles published in 15 leading higher education journals…

  16. Embodied Writing: Choreographic Composition as Methodology

    Science.gov (United States)

    Ulmer, Jasmine B.

    2015-01-01

    This paper seeks to examine how embodied methodological approaches might inform dance education practice and research. Through a series of examples, this paper explores how choreographic writing might function as an embodied writing methodology. Here, choreographic writing is envisioned as a form of visual word choreography in which words move,…

  17. METHODOLOGICAL PROBLEMS OF E-LEARNING DIDACTICS

    Directory of Open Access Journals (Sweden)

    Sergey F. Sergeev

    2015-01-01

    Full Text Available The article is devoted to the discussion of the methodological problems of e-learning, didactic issues the use of advanced networking and Internet technologies to create training systems and simulators based on the methodological principles of non-classical and post-non-classical psychology and pedagogy. 

  18. Improving Learning Outcome Using Six Sigma Methodology

    Science.gov (United States)

    Tetteh, Godson A.

    2015-01-01

    Purpose: The purpose of this research paper is to apply the Six Sigma methodology to identify the attributes of a lecturer that will help improve a student's prior knowledge of a discipline from an initial "x" per cent knowledge to a higher "y" per cent of knowledge. Design/methodology/approach: The data collection method…

  19. Grounded Theory Methodology: Positivism, Hermeneutics, and Pragmatism

    Science.gov (United States)

    Age, Lars-Johan

    2011-01-01

    Glaserian grounded theory methodology, which has been widely adopted as a scientific methodology in recent decades, has been variously characterised as "hermeneutic" and "positivist." This commentary therefore takes a different approach to characterising grounded theory by undertaking a comprehensive analysis of: (a) the philosophical paradigms of…

  20. A methodology for developing distributed programs

    NARCIS (Netherlands)

    Ramesh, S.; Mehndiratta, S.L.

    1987-01-01

    A methodology, different from the existing ones, for constructing distributed programs is presented. It is based on the well-known idea of developing distributed programs via synchronous and centralized programs. The distinguishing features of the methodology are: 1) specification include process

  1. Methodology for performing surveys for fixed contamination

    International Nuclear Information System (INIS)

    Durham, J.S.; Gardner, D.L.

    1994-10-01

    This report describes a methodology for performing instrument surveys for fixed contamination that can be used to support the release of material from radiological areas, including release to controlled areas and release from radiological control. The methodology, which is based on a fast scan survey and a series of statistical, fixed measurements, meets the requirements of the U.S. Department of Energy Radiological Control Manual (RadCon Manual) (DOE 1994) and DOE Order 5400.5 (DOE 1990) for surveys for fixed contamination and requires less time than a conventional scan survey. The confidence interval associated with the new methodology conforms to the draft national standard for surveys. The methodology that is presented applies only to surveys for fixed contamination. Surveys for removable contamination are not discussed, and the new methodology does not affect surveys for removable contamination

  2. Imaginative methodologies in the social sciences

    DEFF Research Database (Denmark)

    Imaginative Methodologies develops, expands and challenges conventional social scientific methodology and language by way of literary, poetic and other alternative sources of inspiration. Sociologists, social workers, anthropologists, criminologists and psychologists all try to rethink, provoke...... and reignite social scientific methodology. Imaginative Methodologies challenges the mainstream social science methodological orthodoxy closely guarding the boundaries between the social sciences and the arts and humanities, pointing out that authors and artists are often engaged in projects parallel to those...... of the social sciences and vice versa, and that artistic and cultural productions today do not constitute a specialist field, but are integral to our social reality. The book will be of interest to scholars and students in the social sciences and across the arts and humanities working with questions...

  3. USGS Methodology for Assessing Continuous Petroleum Resources

    Science.gov (United States)

    Charpentier, Ronald R.; Cook, Troy A.

    2011-01-01

    The U.S. Geological Survey (USGS) has developed a new quantitative methodology for assessing resources in continuous (unconventional) petroleum deposits. Continuous petroleum resources include shale gas, coalbed gas, and other oil and gas deposits in low-permeability ("tight") reservoirs. The methodology is based on an approach combining geologic understanding with well productivities. The methodology is probabilistic, with both input and output variables as probability distributions, and uses Monte Carlo simulation to calculate the estimates. The new methodology is an improvement of previous USGS methodologies in that it better accommodates the uncertainties in undrilled or minimally drilled deposits that must be assessed using analogs. The publication is a collection of PowerPoint slides with accompanying comments.

  4. Methodologies for certification of transuranic waste packages

    International Nuclear Information System (INIS)

    Christensen, R.N.; Kok, K.D.

    1980-10-01

    The objective of this study was to postulate methodologies for certification that a waste package is acceptable for disposal in a licensed geologic repository. Within the context of this report, certification means the overall process which verifies that a waste package meets the criteria or specifications established for acceptance for disposal in a repository. The overall methodology for certification will include (1) certifying authorities, (2) tests and procedures, and (3) documentation and quality assurance programs. Each criterion will require a methodology that is specific to that criterion. In some cases, different waste forms will require a different methodology. The purpose of predicting certification methodologies is to provide additional information as to what changes, if any, are needed for the TRU waste in storage

  5. Preliminary safety analysis methodology for the SMART

    Energy Technology Data Exchange (ETDEWEB)

    Bae, Kyoo Hwan; Chung, Y. J.; Kim, H. C.; Sim, S. K.; Lee, W. J.; Chung, B. D.; Song, J. H. [Korea Atomic Energy Research Institute, Taejeon (Korea)

    2000-03-01

    This technical report was prepared for a preliminary safety analysis methodology of the 330MWt SMART (System-integrated Modular Advanced ReacTor) which has been developed by Korea Atomic Energy Research Institute (KAERI) and funded by the Ministry of Science and Technology (MOST) since July 1996. This preliminary safety analysis methodology has been used to identify an envelope for the safety of the SMART conceptual design. As the SMART design evolves, further validated final safety analysis methodology will be developed. Current licensing safety analysis methodology of the Westinghouse and KSNPP PWRs operating and under development in Korea as well as the Russian licensing safety analysis methodology for the integral reactors have been reviewed and compared to develop the preliminary SMART safety analysis methodology. SMART design characteristics and safety systems have been reviewed against licensing practices of the PWRs operating or KNGR (Korean Next Generation Reactor) under construction in Korea. Detailed safety analysis methodology has been developed for the potential SMART limiting events of main steam line break, main feedwater pipe break, loss of reactor coolant flow, CEA withdrawal, primary to secondary pipe break and the small break loss of coolant accident. SMART preliminary safety analysis methodology will be further developed and validated in parallel with the safety analysis codes as the SMART design further evolves. Validated safety analysis methodology will be submitted to MOST as a Topical Report for a review of the SMART licensing safety analysis methodology. Thus, it is recommended for the nuclear regulatory authority to establish regulatory guides and criteria for the integral reactor. 22 refs., 18 figs., 16 tabs. (Author)

  6. Mechatronics methodology: 15 years of experience

    Directory of Open Access Journals (Sweden)

    Efren Gorrostieta

    2015-09-01

    Full Text Available This article presents a methodology to teach students to develop mechatronic projects. It was taught in higher education schools, in different universities in Mexico, in courses such as: Robotics, Control Systems, Mechatronic Systems, Artificial Intelligence, etc. The intention of this methodology is not only to achieve the integration of different subjects but also to accomplish synergy between them so that the final result may be the best possible in quality, time and robustness. Since its introduction into the educational area, this methodology was evaluated and modified for approximately five years, were substantial characteristics were adopted. For the next ten years, only minor alterations were carried out. Fifteen years of experience have proven that the methodology is useful not only for training but also for real projects. In this article, we first explain the methodology and its main characteristics, as well as a brief history of its teaching in different educational programs. Then, we present two cases were the methodology was successfully applied. The first project consisted in the design, construction and evaluation of a mobile robotic manipulator which aims to be used as an explosives ordnance device. In the second case, we document the results of a project assignment for robotics tasks carried out by students which were formerly taught with the methodology.

  7. Research Methodology in Global Strategy Research

    DEFF Research Database (Denmark)

    Cuervo-Cazurra, Alvaro; Mudambi, Ram; Pedersen, Torben

    2017-01-01

    We review advances in research methodology used in global strategy research and provide suggestions on how researchers can improve their analyses and arguments. Methodological advances in the extraction of information, such as computer-aided text analysis, and in the analysis of datasets......, such as differences-in-differences and propensity score matching, have helped deal with challenges (e.g., endogeneity and causality) that bedeviled earlier studies and resulted in conflicting findings. These methodological advances need to be considered as tools that complement theoretical arguments and well......-explained logics and mechanisms so that researchers can provide better and more relevant recommendations to managers designing the global strategies of their organizations....

  8. Air pollution monitoring - a methodological approach

    International Nuclear Information System (INIS)

    Trajkovska Trpevska, Magdalena

    2002-01-01

    Methodology for monitoring the emission of polluters in the air is a complex concept that in general embraces following fazes: sampling, laboratory treatment, and interpretation of results. In Company for technological and laboratory investigation and environmental protection - Mining Institute Skopje, the control of emission of polluters in the air is performing according methodology based in general on the recommendation of standard VDI 2.066 prescribe from Ministry of Ecology in Germany, because adequate legislation in our country does not exist. In this article the basic treatment of methodology for the air polluters emission control is presented. (Original)

  9. Nuclear power plant simulation facility evaluation methodology

    International Nuclear Information System (INIS)

    Haas, P.M.; Carter, R.J.; Laughery, K.R. Jr.

    1985-01-01

    A methodology for evaluation of nuclear power plant simulation facilities with regard to their acceptability for use in the US Nuclear Regulatory Commission (NRC) operator licensing exam is described. The evaluation is based primarily on simulator fidelity, but incorporates some aspects of direct operator/trainee performance measurement. The panel presentation and paper discuss data requirements, data collection, data analysis and criteria for conclusions regarding the fidelity evaluation, and summarize the proposed use of direct performance measurment. While field testing and refinement of the methodology are recommended, this initial effort provides a firm basis for NRC to fully develop the necessary methodology

  10. Photovoltaic module energy rating methodology development

    Energy Technology Data Exchange (ETDEWEB)

    Kroposki, B.; Myers, D.; Emery, K.; Mrig, L. [National Renewable Energy Lab., Golden, CO (United States); Whitaker, C.; Newmiller, J. [Endecon Engineering, San Ramon, CA (United States)

    1996-05-01

    A consensus-based methodology to calculate the energy output of a PV module will be described in this paper. The methodology develops a simple measure of PV module performance that provides for a realistic estimate of how a module will perform in specific applications. The approach makes use of the weather data profiles that describe conditions throughout the United States and emphasizes performance differences between various module types. An industry-representative Technical Review Committee has been assembled to provide feedback and guidance on the strawman and final approach used in developing the methodology.

  11. Covariance Evaluation Methodology for Neutron Cross Sections

    Energy Technology Data Exchange (ETDEWEB)

    Herman,M.; Arcilla, R.; Mattoon, C.M.; Mughabghab, S.F.; Oblozinsky, P.; Pigni, M.; Pritychenko, b.; Songzoni, A.A.

    2008-09-01

    We present the NNDC-BNL methodology for estimating neutron cross section covariances in thermal, resolved resonance, unresolved resonance and fast neutron regions. The three key elements of the methodology are Atlas of Neutron Resonances, nuclear reaction code EMPIRE, and the Bayesian code implementing Kalman filter concept. The covariance data processing, visualization and distribution capabilities are integral components of the NNDC methodology. We illustrate its application on examples including relatively detailed evaluation of covariances for two individual nuclei and massive production of simple covariance estimates for 307 materials. Certain peculiarities regarding evaluation of covariances for resolved resonances and the consistency between resonance parameter uncertainties and thermal cross section uncertainties are also discussed.

  12. GO methodology. Volume 1. Overview manual

    International Nuclear Information System (INIS)

    1983-06-01

    The GO methodology is a success-oriented probabilistic system performance analysis technique. The methodology can be used to quantify system reliability and availability, identify and rank critical components and the contributors to system failure, construct event trees, and perform statistical uncertainty analysis. Additional capabilities of the method currently under development will enhance its use in evaluating the effects of external events and common cause failures on system performance. This Overview Manual provides a description of the GO Methodology, how it can be used, and benefits of using it in the analysis of complex systems

  13. Comparative analysis of proliferation resistance assessment methodologies

    International Nuclear Information System (INIS)

    Takaki, Naoyuki; Kikuchi, Masahiro; Inoue, Naoko; Osabe, Takeshi

    2005-01-01

    Comparative analysis of the methodologies was performed based on the discussions in the international workshop on 'Assessment Methodology of Proliferation Resistance for Future Nuclear Energy Systems' held in Tokyo, on March 2005. Through the workshop and succeeding considerations, it is clarified that the proliferation resistance assessment methodologies are affected by the broader nuclear options being pursued and also by the political situations of the state. Even the definition of proliferation resistance, despite the commonality of fundamental issues, derives from perceived threat and implementation circumstances inherent to the larger programs. Deep recognitions of the 'difference' among communities would help us to make further essential and progressed discussion with harmonization. (author)

  14. Challenges and Opportunities for Harmonizing Research Methodology

    DEFF Research Database (Denmark)

    van Hees, V. T.; Thaler-Kall, K.; Wolf, K. H.

    2016-01-01

    Objectives: Raw accelerometry is increasingly being used in physical activity research, but diversity in sensor design, attachment and signal processing challenges the comparability of research results. Therefore, efforts are needed to harmonize the methodology. In this article we reflect on how...... increased methodological harmonization may be achieved. Methods: The authors of this work convened for a two-day workshop (March 2014) themed on methodological harmonization of raw accelerometry. The discussions at the workshop were used as a basis for this review. Results: Key stakeholders were identified...... as manufacturers, method developers, method users (application), publishers, and funders. To facilitate methodological harmonization in raw accelerometry the following action points were proposed: i) Manufacturers are encouraged to provide a detailed specification of their sensors, ii) Each fundamental step...

  15. Methodological issues of postoperative cognitive dysfunction research

    DEFF Research Database (Denmark)

    Funder, Kamilia S; Steinmetz, Jacob; Rasmussen, Lars S

    2010-01-01

    to reveal postoperative cognitive decline, and questionnaires are not useful for this purpose. There is a profound lack of consensus regarding the research methodology for detection of cognitive deterioration, especially the diagnostic criteria. Issues, such as baseline performance, learning effects...

  16. Hanford Site baseline risk assessment methodology

    International Nuclear Information System (INIS)

    1992-03-01

    This report describes risk assessment methodology associated with the remedial action programs at the Hanford Reservation. Topics addressed include human health evaluation, pollutant and radionuclide transport through the environment, and environmental transport pathways

  17. Hanford Site baseline risk assessment methodology

    International Nuclear Information System (INIS)

    1993-03-01

    This methodology has been developed to prepare human health and environmental evaluations of risk as part of the Comprehensive Environmental Response, Compensation, and Liability Act remedial investigations (RIs) and the Resource Conservation and Recovery Act facility investigations (FIs) performed at the Hanford Site pursuant to the Hanford Federal Facility Agreement and Consent Order referred to as the Tri-Party Agreement. Development of the methodology has been undertaken so that Hanford Site risk assessments are consistent with current regulations and guidance, while providing direction on flexible, ambiguous, or undefined aspects of the guidance. The methodology identifies Site-specific risk assessment considerations and integrates them with approaches for evaluating human and environmental risk that can be factored into the risk assessment program supporting the Hanford Site cleanup mission. Consequently, the methodology will enhance the preparation and review of individual risk assessments at the Hanford Site

  18. A Methodology Inventory for Composition Education.

    Science.gov (United States)

    Donlan, Dan

    1979-01-01

    Illustrates one method for describing changes in classroom behavior of composition teachers: a methodology inventory that may be used as an indicator of expertise, a needs assessment, and a summative self-evaluation. (DD)

  19. Study on methodology: Version 1.2

    OpenAIRE

    Fraunhofer-Institut für Software und Systemtechnik -ISST-, Berlin; Semantic Interoperability Centre Europe -SEMIC.EU-

    2009-01-01

    This study presents state-of-the-art methodologies for treating the different types of semantic conflicts, i.e. detecting and resolving these conflicts or even avoiding them by reusing existing solutions.

  20. Zooplankton Methodology, Collection & identyification - A field manual

    Digital Repository Service at National Institute of Oceanography (India)

    Goswami, S.C.

    and productivity would largely depend upon the use of correct methodology which involves collection of samples, fixation, preservation, analysis and computation of data. The detailed procedures on all these aspects are given in this manual....

  1. Problem solving using soft systems methodology.

    Science.gov (United States)

    Land, L

    This article outlines a method of problem solving which considers holistic solutions to complex problems. Soft systems methodology allows people involved in the problem situation to have control over the decision-making process.

  2. Methodological pitfalls of the Unconscious Thought paradigm

    NARCIS (Netherlands)

    Waroquier, Laurent; Marchiori, David; Klein, Olivier; Cleeremans, Axel

    2009-01-01

    According to Unconscious Thought Theory (UTT: Dijksterhuis & Nordgren, 2006), complex decisions are best made after a period of distraction assumed to elicit "unconscious thought". Over three studies, respectively offering a conceptual, an identical and a methodologically improved replication of

  3. Organizing the Methodology Work at Higher School

    Directory of Open Access Journals (Sweden)

    O. A. Plaksina

    2012-01-01

    Full Text Available The paper considers the methodology components of organizing the higher school training. The research and analysis of the existing methodology systems carried out by the authors reveals that their advantages and disadvantages are related to the type of the system creating element of the methodology system organizational structure. The optimal scheme of such system has been developed in the context of Vocational School Reorganization implying the specification and expansion of the set of basic design principles of any control system. Following the suggested organizational approach provides the grounds for teachers’ self development and professional growth. The methodology of the approach allows using the given structure in any higher educational institution, providing the system transition from its simple functioning to the sustainable development mode. 

  4. Exploring Participatory Methodologies in Organizational Discourse Analysis

    DEFF Research Database (Denmark)

    Plotnikof, Mie

    2014-01-01

    Recent debates in the field of organizational discourse analysis stress contrasts in approaches as single-level vs. multi-level, critical vs. participatory, discursive vs. material methods. They raise methodological issues of combining such to embrace multimodality in order to enable new contribu......Recent debates in the field of organizational discourse analysis stress contrasts in approaches as single-level vs. multi-level, critical vs. participatory, discursive vs. material methods. They raise methodological issues of combining such to embrace multimodality in order to enable new...... contributions. As regards conceptual efforts are made but further exploration of methodological combinations and their practical implications are called for. This paper argues 1) to combine methodologies by approaching this as scholarly subjectification processes, and 2) to perform combinations in both...

  5. A Methodological Critique of the Moynihan Report

    Science.gov (United States)

    Swan, L. Alex

    1974-01-01

    Analyzing Moynihan's findings, author argues that it is impossible, methodologically speaking, for Moynihan to draw valid and useful conclusions relative to the issues he raised from the data he presents in his report. (Author/RJ)

  6. A Narrative in Search of a Methodology.

    Science.gov (United States)

    Treloar, Anna; Stone, Teresa Elizabeth; McMillan, Margaret; Flakus, Kirstin

    2015-07-01

    Research papers present us with the summaries of scholars' work; what we readers do not see are the struggles behind the decision to choose one methodology over another. A student's mental health portfolio contained a narrative that led to an exploration of the most appropriate methodology for a projected study of clinical anecdotes told by nurses who work in mental health settings to undergraduates and new recruits about mental health nursing. This paper describes the process of struggle, beginning with the student's account, before posing a number of questions needing answers before the choice of the most appropriate methodology. We argue, after discussing the case for the use of literary analysis, discourse analysis, symbolic interactionism, hermeneutics, and narrative research, that case study research is the methodology of choice. Case study is frequently used in educational research and is sufficiently flexible to allow for an exploration of the phenomenon. © 2014 Wiley Periodicals, Inc.

  7. Operations management research methodologies using quantitative modeling

    NARCIS (Netherlands)

    Bertrand, J.W.M.; Fransoo, J.C.

    2002-01-01

    Gives an overview of quantitative model-based research in operations management, focusing on research methodology. Distinguishes between empirical and axiomatic research, and furthermore between descriptive and normative research. Presents guidelines for doing quantitative model-based research in

  8. A Methodology for Assessing Software Releasibility

    National Research Council Canada - National Science Library

    Kochan, Matthew

    1997-01-01

    .... This thesis proposes a new methodology which addresses this tradeoff. The term "releasable" Software is introduced as a product which demonstrates a fault content acceptable to users in the field...

  9. Hanford Site Risk Assessment Methodology. Revision 3

    International Nuclear Information System (INIS)

    1995-05-01

    This methodology has been developed to prepare human health and ecological evaluations of risk as part of the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA) remedial investigations (RI) and the Resource conservation and Recovery Act of 1976 (RCRA) facility investigations (FI) performed at the Hanford Site pursuant to the hanford Federal Facility Agreement and Consent Order (Ecology et al. 1994), referred to as the Tri-Party Agreement. Development of the methodology has been undertaken so that Hanford Site risk assessments are consistent with current regulations and guidance, while providing direction on flexible, ambiguous, or undefined aspects of the guidance. The methodology identifies site-specific risk assessment considerations and integrates them with approaches for evaluating human and ecological risk that can be factored into the risk assessment program supporting the Hanford Site cleanup mission. Consequently, the methodology will enhance the preparation and review of individual risk assessments at the Hanford Site

  10. Research Methodology in Recurrent Pregnancy Loss

    DEFF Research Database (Denmark)

    Christiansen, Ole B

    2014-01-01

    The aim of this article is to highlight pitfalls in research methodology that may explain why studies in recurrent pregnancy loss (RPL) often provide very divergent results. It is hoped that insight into this issue may help clinicians decide which published studies are the most valid. It may help...... researchers to eliminate methodological flaws in future studies, which may hopefully come to some kind of agreement about the usefulness of diagnostic tests and treatments in RPL....

  11. Nondestructive assay methodologies in nuclear forensics analysis

    International Nuclear Information System (INIS)

    Tomar, B.S.

    2016-01-01

    In the present chapter, the nondestructive assay (NDA) methodologies used for analysis of nuclear materials as a part of nuclear forensic investigation have been described. These NDA methodologies are based on (i) measurement of passive gamma and neutrons emitted by the radioisotopes present in the nuclear materials, (ii) measurement of gamma rays and neutrons emitted after the active interrogation of the nuclear materials with a source of X-rays, gamma rays or neutrons

  12. Big data and virtual communities: methodological issues

    OpenAIRE

    Martínez Torres, María del Rocío; Toral, S. L.; Fornara, Nicoletta

    2014-01-01

    Virtual communities represent today en emergent phenomenon through which users get together to create ideas, to obtain help from one another, or just to casually engage in discussions. Their increasing popularity as well as their utility as a source of business value and marketing strategies justify the necessity of defi ning some specifi c methodologies for analyzing them. The aim of this paper is providing new insights into virtual communities from a methodological viewpoint, hi...

  13. Comparative study on software development methodologies

    OpenAIRE

    Mihai Liviu DESPA

    2014-01-01

    This paper focuses on the current state of knowledge in the field of software development methodologies. It aims to set the stage for the formalization of a software development methodology dedicated to innovation orientated IT projects. The paper starts by depicting specific characteristics in software development project management. Managing software development projects involves techniques and skills that are proprietary to the IT industry. Also the software development project manager han...

  14. BEEHIVE: Sustainable Methodology for Fashion Design

    OpenAIRE

    Morais, C.; Carvalho, C.; Broega, A. C.

    2014-01-01

    The proposal methodology tends to close the “product fashion cycle”, defending the existence of a good waste management policy, so that the clothing are thrown away can be reused or recycled to come back again as material to produce yarn, fabric or knit. Subsequently these materials should be include in the production of sustainable apparel, whose design methodologies should be concerned in providing more durable garments and being possible to transform according to the occasion and the user....

  15. Update of Part 61 impacts analysis methodology

    International Nuclear Information System (INIS)

    Oztunali, O.I.; Roles, G.W.

    1986-01-01

    The US Nuclear Regulatory Commission is expanding the impacts analysis methodology used during the development of the 10 CFR Part 61 rule to allow improved consideration of costs and impacts of disposal of waste that exceeds Class C concentrations. The project includes updating the computer codes that comprise the methodology, reviewing and updating data assumptions on waste streams and disposal technologies, and calculation of costs for small as well as large disposal facilities. This paper outlines work done to date on this project

  16. Update of Part 61 impacts analysis methodology

    International Nuclear Information System (INIS)

    Oztunali, O.I.; Roles, G.W.; US Nuclear Regulatory Commission, Washington, DC 20555)

    1985-01-01

    The US Nuclear Regulatory Commission is expanding the impacts analysis methodology used during the development of the 10 CFR Part 61 regulation to allow improved consideration of costs and impacts of disposal of waste that exceeds Class C concentrations. The project includes updating the computer codes that comprise the methodology, reviewing and updating data assumptions on waste streams and disposal technologies, and calculation of costs for small as well as large disposal facilities. This paper outlines work done to date on this project

  17. A Design Methodology for Computer Security Testing

    OpenAIRE

    Ramilli, Marco

    2013-01-01

    The field of "computer security" is often considered something in between Art and Science. This is partly due to the lack of widely agreed and standardized methodologies to evaluate the degree of the security of a system. This dissertation intends to contribute to this area by investigating the most common security testing strategies applied nowadays and by proposing an enhanced methodology that may be effectively applied to different threat scenarios with the same degree of effectiveness. ...

  18. Review and evaluation of paleohydrologic methodologies

    Energy Technology Data Exchange (ETDEWEB)

    Foley, M.G.; Zimmerman, D.A.; Doesburg, J.M.; Thorne, P.D.

    1982-12-01

    A literature review was conducted to identify methodologies that could be used to interpret paleohydrologic environments. Paleohydrology is the study of past hydrologic systems or of the past behavior of an existing hydrologic system. The purpose of the review was to evaluate how well these methodologies could be applied to the siting of low-level radioactive waste facilities. The computer literature search queried five bibliographical data bases containing over five million citations of technical journals, books, conference papers, and reports. Two data-base searches (United States Geological Survey - USGS) and a manual search were also conducted. The methodologies were examined for data requirements and sensitivity limits. Paleohydrologic interpretations are uncertain because of the effects of time on hydrologic and geologic systems and because of the complexity of fluvial systems. Paleoflow determinations appear in many cases to be order-of-magnitude estimates. However, the methodologies identified in this report mitigate this uncertainty when used collectively as well as independently. That is, the data from individual methodologies can be compared or combined to corroborate hydrologic predictions. In this manner, paleohydrologic methodologies are viable tools to assist in evaluating the likely future hydrology of low-level radioactive waste sites.

  19. A design methodology for unattended monitoring systems

    International Nuclear Information System (INIS)

    SMITH, JAMES D.; DELAND, SHARON M.

    2000-01-01

    The authors presented a high-level methodology for the design of unattended monitoring systems, focusing on a system to detect diversion of nuclear materials from a storage facility. The methodology is composed of seven, interrelated analyses: Facility Analysis, Vulnerability Analysis, Threat Assessment, Scenario Assessment, Design Analysis, Conceptual Design, and Performance Assessment. The design of the monitoring system is iteratively improved until it meets a set of pre-established performance criteria. The methodology presented here is based on other, well-established system analysis methodologies and hence they believe it can be adapted to other verification or compliance applications. In order to make this approach more generic, however, there needs to be more work on techniques for establishing evaluation criteria and associated performance metrics. They found that defining general-purpose evaluation criteria for verifying compliance with international agreements was a significant undertaking in itself. They finally focused on diversion of nuclear material in order to simplify the problem so that they could work out an overall approach for the design methodology. However, general guidelines for the development of evaluation criteria are critical for a general-purpose methodology. A poor choice in evaluation criteria could result in a monitoring system design that solves the wrong problem

  20. Review and evaluation of paleohydrologic methodologies

    International Nuclear Information System (INIS)

    Foley, M.G.; Zimmerman, D.A.; Doesburg, J.M.; Thorne, P.D.

    1982-12-01

    A literature review was conducted to identify methodologies that could be used to interpret paleohydrologic environments. Paleohydrology is the study of past hydrologic systems or of the past behavior of an existing hydrologic system. The purpose of the review was to evaluate how well these methodologies could be applied to the siting of low-level radioactive waste facilities. The computer literature search queried five bibliographical data bases containing over five million citations of technical journals, books, conference papers, and reports. Two data-base searches (United States Geological Survey - USGS) and a manual search were also conducted. The methodologies were examined for data requirements and sensitivity limits. Paleohydrologic interpretations are uncertain because of the effects of time on hydrologic and geologic systems and because of the complexity of fluvial systems. Paleoflow determinations appear in many cases to be order-of-magnitude estimates. However, the methodologies identified in this report mitigate this uncertainty when used collectively as well as independently. That is, the data from individual methodologies can be compared or combined to corroborate hydrologic predictions. In this manner, paleohydrologic methodologies are viable tools to assist in evaluating the likely future hydrology of low-level radioactive waste sites

  1. Demonstration of an infiltration evaluation methodology

    International Nuclear Information System (INIS)

    Smyth, J.D.; Gee, G.W.; Kincaid, C.T.; Nichols, W.M.; Bresler, E.

    1990-07-01

    An Infiltration Evaluation Methodology (IEM) was developed for the US Nuclear Regulatory Commission (NRC) by Pacific Northwest Laboratory (PNL) to provide a consistent, well formulated approach for evaluating drainage through engineered covers at low-level radioactive waste (LLW) sites. The methodology is designed to help evaluate the ability of proposed waste site covers to minimize drainage for LLW site license applications and for sites associated with the Uranium Mill Tailings Remedial Action (UMTRA) program. The objective of this methodology is to estimate the drainage through an engineered burial site cover system. The drainage estimate can be used as an input to a broader performance assessment methodology currently under development by the NRC. The methodology is designed to simulate, at the field scale, significant factors and hydrologic conditions which determine or influence estimates of infiltration, long-term moisture content profiles, and drainage from engineered covers and barriers. The IEM developed under this study acknowledges the uncertainty inherent in soil properties and quantifies the influence of such uncertainty on the estimates of drainage in engineered cover systems at waste disposal sites. 6 refs., 1 fig

  2. Critical infrastructure systems of systems assessment methodology.

    Energy Technology Data Exchange (ETDEWEB)

    Sholander, Peter E.; Darby, John L.; Phelan, James M.; Smith, Bryan; Wyss, Gregory Dane; Walter, Andrew; Varnado, G. Bruce; Depoy, Jennifer Mae

    2006-10-01

    Assessing the risk of malevolent attacks against large-scale critical infrastructures requires modifications to existing methodologies that separately consider physical security and cyber security. This research has developed a risk assessment methodology that explicitly accounts for both physical and cyber security, while preserving the traditional security paradigm of detect, delay, and respond. This methodology also accounts for the condition that a facility may be able to recover from or mitigate the impact of a successful attack before serious consequences occur. The methodology uses evidence-based techniques (which are a generalization of probability theory) to evaluate the security posture of the cyber protection systems. Cyber threats are compared against cyber security posture using a category-based approach nested within a path-based analysis to determine the most vulnerable cyber attack path. The methodology summarizes the impact of a blended cyber/physical adversary attack in a conditional risk estimate where the consequence term is scaled by a ''willingness to pay'' avoidance approach.

  3. Methodology for developing new test methods

    Directory of Open Access Journals (Sweden)

    A. I. Korobko

    2017-06-01

    Full Text Available The paper describes the methodology for developing new test methods and forming solutions for the development of new test methods. The basis of the methodology for developing new test methods is the individual elements of the system and process approaches. They contribute to the development of an effective research strategy for the object, the study of interrelations, the synthesis of an adequate model of the test method. The effectiveness of the developed test method is determined by the correct choice of the set of concepts, their interrelations and mutual influence. This allows you to solve the tasks assigned to achieve the goal. The methodology is based on the use of fuzzy cognitive maps. The question of the choice of the method on the basis of which the model for the formation of solutions is based is considered. The methodology provides for recording a model for a new test method in the form of a finite set of objects. These objects are significant for the test method characteristics. Then a causal relationship is established between the objects. Further, the values of fitness indicators and the observability of the method and metrological tolerance for the indicator are established. The work is aimed at the overall goal of ensuring the quality of tests by improving the methodology for developing the test method.

  4. GENESIS OF METHODOLOGY OF MANAGEMENT BY DEVELOPMENT OF ORGANIZATIONS

    Directory of Open Access Journals (Sweden)

    Z.N. Varlamova

    2007-06-01

    Full Text Available In clause the genesis of methodology of management of development of organizations as sets of the used methodological approaches and methods is investigated. The results of the comparative analysis of the methodological approaches to management of organizational development are submitted. The traditional methodological approaches are complemented strategic experiment and methodology case studies. The approaches to formation of new methodology and technique of research of sources of competitive advantages of organization are considered.

  5. Civil migration and risk assessment methodology

    International Nuclear Information System (INIS)

    Onishi, Y.; Brown, S.M.; Olsen, A.R.; Parkhurst, M.A.

    1981-01-01

    To provide a scientific basis for risk assessment and decision making, the Chemical Migration and Risk Assessment (CMRA) Methodology was developed to simulate overland and instream toxic containment migration and fate, and to predict the probability of acute and chronic impacts on aquatic biota. The simulation results indicated that the time between the pesticide application and the subsequent runoff producing event was the most important factor determining the amount of the alachlor. The study also revealed that sediment transport has important effects on contaminant migration when sediment concentrations in receiving streams are high or contaminants are highly susceptible to adsorption by sediment. Although the capabilities of the CMRA methodology were only partially tested in this study, the results demonstrate that methodology can be used as a scientific decision-making tool for toxic chemical regulations, a research tool to evaluate the relative significance of various transport and degradation phenomena, as well as a tool to examine the effectiveness of toxic chemical control practice

  6. Health economic evaluation: important principles and methodology.

    Science.gov (United States)

    Rudmik, Luke; Drummond, Michael

    2013-06-01

    To discuss health economic evaluation and improve the understanding of common methodology. This article discusses the methodology for the following types of economic evaluations: cost-minimization, cost-effectiveness, cost-utility, cost-benefit, and economic modeling. Topics include health-state utility measures, the quality-adjusted life year (QALY), uncertainty analysis, discounting, decision tree analysis, and Markov modeling. Economic evaluation is the comparative analysis of alternative courses of action in terms of both their costs and consequences. With increasing health care expenditure and limited resources, it is important for physicians to consider the economic impact of their interventions. Understanding common methodology involved in health economic evaluation will improve critical appraisal of the literature and optimize future economic evaluations. Copyright © 2012 The American Laryngological, Rhinological and Otological Society, Inc.

  7. Analysing Medieval Urban Space; a methodology

    Directory of Open Access Journals (Sweden)

    Marlous L. Craane MA

    2007-08-01

    Full Text Available This article has been written in reaction to recent developments in medieval history and archaeology, to study not only the buildings in a town but also the spaces that hold them together. It discusses a more objective and interdisciplinary approach for analysing urban morphology and use of space. It proposes a 'new' methodology by combining town plan analysis and space syntax. This methodology was trialled on the city of Utrecht in the Netherlands. By comparing the results of this 'new' methodology with the results of previous, more conventional, research, this article shows that space syntax can be applied successfully to medieval urban contexts. It does this by demonstrating a strong correlation between medieval economic spaces and the most integrated spaces, just as is found in the study of modern urban environments. It thus provides a strong basis for the use of this technique in future research of medieval urban environments.

  8. A methodology to describe process control requirements

    International Nuclear Information System (INIS)

    Carcagno, R.; Ganni, V.

    1994-01-01

    This paper presents a methodology to describe process control requirements for helium refrigeration plants. The SSC requires a greater level of automation for its refrigeration plants than is common in the cryogenics industry, and traditional methods (e.g., written descriptions) used to describe process control requirements are not sufficient. The methodology presented in this paper employs tabular and graphic representations in addition to written descriptions. The resulting document constitutes a tool for efficient communication among the different people involved in the design, development, operation, and maintenance of the control system. The methodology is not limited to helium refrigeration plants, and can be applied to any process with similar requirements. The paper includes examples

  9. Methodological and Analytical Dilemmas in Autoethnographic Research

    Directory of Open Access Journals (Sweden)

    Elena Maydell

    2010-01-01

    Full Text Available This article presents an argument on the application of theoretical and methodological frameworks to the study of identity from an autoethnographic perspective. In order to guide the analysis process, the author employed social constructionism as the main theoretical foundation, whereas thematic analysis and positioning theory were deployed as the methodological frameworks. Further, in the process of using ethnographic methods to study the identity of Russian immigrants to New Zealand, the author found herself also needing to use autoethnography to interrogate and understand her own journey. The insider/outsider position of the author who belongs to the same minority group became the most vital tool in her identity construction. In this regard, it is impossible to engage fully with the autoethnographic research practice without understanding the impact of others on identity construction of self, and a strong theoretical and methodological scholarship can provide a valuable foundation for this process.

  10. A prioritization methodology to strategic planning process

    International Nuclear Information System (INIS)

    Rondinelli Junior, Francisco; Cherif, Hadj Slimane

    2009-01-01

    In the process of formulation of a Strategic Plan, there is always a step that deals with choices among different options and strategies. To do that a prioritization methodology has to be applied in order to achieve the higher needs identified along the analysis and evaluation of problems. To assign priorities within a set of needs/problems of a strategic nature and identified within various areas of activity or different sectors, it is proposed a methodology that envisage the use of specific attributes for which a graded scale of values is established for each need/problem, which, at the end of the process, allows a quantitative comparison among them. The methodology presented in this paper was developed following an approach that has been used in many areas over the last 20 years by various public and private institutions, and also by international organizations involved in promotion and development work. (author)

  11. Methodology for evaluation of industrial CHP production

    International Nuclear Information System (INIS)

    Pavlovic, Nenad V.; Studovic, Milovan

    2000-01-01

    At the end of the century industry switched from exclusive power consumer into power consumer-producer which is one of the players on the deregulated power market. Consequently, goals of industrial plant optimization have to be changed, making new challenges that industrial management has to be faced with. In the paper is reviewed own methodology for evaluation of industrial power production on deregulated power market. The methodology recognizes economic efficiency of industrial CHP facilities as a main criterion for evaluation. Energy and ecological efficiency are used as additional criteria, in which implicit could be found social goals. Also, methodology recognizes key and limit factors for CHP production in industry. It could be successful applied, by use of available commercial software for energy simulation in CHP plants and economic evaluation. (Authors)

  12. Methodology of environmental risk assessment management

    Directory of Open Access Journals (Sweden)

    Saša T. Bakrač

    2012-04-01

    Full Text Available Successful protection of environment is mostly based on high-quality assessment of potential and present risks. Environmental risk management is a complex process which includes: identification, assessment and control of risk, namely taking measures in order to minimize the risk to an acceptable level. Environmental risk management methodology: In addition to these phases in the management of environmental risk, appropriate measures that affect the reduction of risk occurrence should be implemented: - normative and legal regulations (laws and regulations, - appropriate organizational structures in society, and - establishing quality monitoring of environment. The emphasis is placed on the application of assessment methodologies (three-model concept, as the most important aspect of successful management of environmental risk. Risk assessment methodology - European concept: The first concept of ecological risk assessment methodology is based on the so-called European model-concept. In order to better understand this ecological risk assessment methodology, two concepts - hazard and risk - are introduced. The European concept of environmental risk assessment has the following phases in its implementation: identification of hazard (danger, identification of consequences (if there is hazard, estimate of the scale of consequences, estimate of consequence probability and risk assessment (also called risk characterization. The European concept is often used to assess risk in the environment as a model for addressing the distribution of stressors along the source - path - receptor line. Risk assessment methodology - Canadian concept: The second concept of the methodology of environmental risk assessment is based on the so-called Canadian model-concept. The assessment of ecological risk includes risk arising from natural events (floods, extreme weather conditions, etc., technological processes and products, agents (chemical, biological, radiological, etc

  13. Some Findings Concerning Requirements in Agile Methodologies

    Science.gov (United States)

    Rodríguez, Pilar; Yagüe, Agustín; Alarcón, Pedro P.; Garbajosa, Juan

    Agile methods have appeared as an attractive alternative to conventional methodologies. These methods try to reduce the time to market and, indirectly, the cost of the product through flexible development and deep customer involvement. The processes related to requirements have been extensively studied in literature, in most cases in the frame of conventional methods. However, conclusions of conventional methodologies could not be necessarily valid for Agile; in some issues, conventional and Agile processes are radically different. As recent surveys report, inadequate project requirements is one of the most conflictive issues in agile approaches and better understanding about this is needed. This paper describes some findings concerning requirements activities in a project developed under an agile methodology. The project intended to evolve an existing product and, therefore, some background information was available. The major difficulties encountered were related to non-functional needs and management of requirements dependencies.

  14. Researching Lean: Methodological implications of loose definitions

    DEFF Research Database (Denmark)

    Brännmark, Mikael; Langstrand, Jostein; Johansson, Stina

    2012-01-01

    practices seem to overlap with other popular management concepts, such as High Performance Work Systems, World Class Manufacturing and Total Quality Management. This confusion, combined with different methodological and theoretical traditions, has led to much debate and contradictory conclusions regarding...... Lean. The purpose of the paper is to illustrate some key methodological issues that need to be considered in future Lean research to allow increased understanding of Lean effects for different stakeholders, primarily meaning the customer, employer and employees. Design/methodology/approach – The paper...... on the case studies, we suggest that future investigations describe the Lean interventions in more detail. General descriptions or analogies, e.g. ‘learning organizations’, presumably increase the present confusion regarding Lean impact on different stakeholders. The case studies also illustrate...

  15. Symbiotic empirical ethics: a practical methodology.

    Science.gov (United States)

    Frith, Lucy

    2012-05-01

    Like any discipline, bioethics is a developing field of academic inquiry; and recent trends in scholarship have been towards more engagement with empirical research. This 'empirical turn' has provoked extensive debate over how such 'descriptive' research carried out in the social sciences contributes to the distinctively normative aspect of bioethics. This paper will address this issue by developing a practical research methodology for the inclusion of data from social science studies into ethical deliberation. This methodology will be based on a naturalistic conception of ethical theory that sees practice as informing theory just as theory informs practice - the two are symbiotically related. From this engagement with practice, the ways that such theories need to be extended and developed can be determined. This is a practical methodology for integrating theory and practice that can be used in empirical studies, one that uses ethical theory both to explore the data and to draw normative conclusions. © 2010 Blackwell Publishing Ltd.

  16. Towards methodological improvement in the Spanish studies

    Directory of Open Access Journals (Sweden)

    Beatriz Amante García

    2012-09-01

    Full Text Available The European Higher Education Area (EHEA has triggered many changes in the new degrees in Spanish universities, mainly in terms of methodology and assessment. However, in order to make such changes a success it is essential to have coordination within the teaching staff as well as active methodologies in use, which enhance and encourage students’ participation in all the activities carried out in the classroom. Most of all, when dealing with formative and summative evaluation, in which students become the ones responsible for their own learning process (López-Pastor, 2009; Torre, 2008. In this second issue of JOTSE we have included several teaching innovation experiences related to the above mentioned methodological and assessment changes.

  17. A methodology for development of biocatalytic processes

    DEFF Research Database (Denmark)

    Lima Ramos, Joana

    are available. The first case study presents a rational approach for defining a development strategy for multi-enzymatic processes. The proposed methodology requires a profound and structured knowledge of the multi-enzyme systems, integrating chemistry, biological and process engineering. In order to suggest......). These process metrics can often be attained by improvements in the reaction chemistry, the biocatalyst, and/or by process engineering, which often requires a complex process development strategy. Interestingly this complexity, which arises from the need for integration of biological and process technologies...... and their relationship with the overall process is not clear.The work described in this thesis presents a methodological approach for early stage development of biocatalytic processes, understanding and dealing with the reaction, biocatalyst and process constraints. When applied, this methodology has a decisive role...

  18. Supplement to the Disposal Criticality Analysis Methodology

    International Nuclear Information System (INIS)

    Thomas, D.A.

    1999-01-01

    The methodology for evaluating criticality potential for high-level radioactive waste and spent nuclear fuel after the repository is sealed and permanently closed is described in the Disposal Criticality Analysis Methodology Topical Report (DOE 1998b). The topical report provides a process for validating various models that are contained in the methodology and states that validation will be performed to support License Application. The Supplement to the Disposal Criticality Analysis Methodology provides a summary of data and analyses that will be used for validating these models and will be included in the model validation reports. The supplement also summarizes the process that will be followed in developing the model validation reports. These reports will satisfy commitments made in the topical report, and thus support the use of the methodology for Site Recommendation and License Application. It is concluded that this report meets the objective of presenting additional information along with references that support the methodology presented in the topical report and can be used both in validation reports and in answering request for additional information received from the Nuclear Regulatory Commission concerning the topical report. The data and analyses summarized in this report and presented in the references are not sufficient to complete a validation report. However, this information will provide a basis for several of the validation reports. Data from several references in this report have been identified with TBV-1349. Release of the TBV governing this data is required prior to its use in quality affecting activities and for use in analyses affecting procurement, construction, or fabrication. Subsequent to the initiation of TBV-1349, DOE issued a concurrence letter (Mellington 1999) approving the request to identify information taken from the references specified in Section 1.4 as accepted data

  19. Using Modern Methodologies with Maintenance Software

    Science.gov (United States)

    Streiffert, Barbara A.; Francis, Laurie K.; Smith, Benjamin D.

    2014-01-01

    Jet Propulsion Laboratory uses multi-mission software produced by the Mission Planning and Sequencing (MPS) team to process, simulate, translate, and package the commands that are sent to a spacecraft. MPS works under the auspices of the Multi-Mission Ground Systems and Services (MGSS). This software consists of nineteen applications that are in maintenance. The MPS software is classified as either class B (mission critical) or class C (mission important). The scheduling of tasks is difficult because mission needs must be addressed prior to performing any other tasks and those needs often spring up unexpectedly. Keeping track of the tasks that everyone is working on is also difficult because each person is working on a different software component. Recently the group adopted the Scrum methodology for planning and scheduling tasks. Scrum is one of the newer methodologies typically used in agile development. In the Scrum development environment, teams pick their tasks that are to be completed within a sprint based on priority. The team specifies the sprint length usually a month or less. Scrum is typically used for new development of one application. In the Scrum methodology there is a scrum master who is a facilitator who tries to make sure that everything moves smoothly, a product owner who represents the user(s) of the software and the team. MPS is not the traditional environment for the Scrum methodology. MPS has many software applications in maintenance, team members who are working on disparate applications, many users, and is interruptible based on mission needs, issues and requirements. In order to use scrum, the methodology needed adaptation to MPS. Scrum was chosen because it is adaptable. This paper is about the development of the process for using scrum, a new development methodology, with a team that works on disparate interruptible tasks on multiple software applications.

  20. Optimized planning methodologies of ASON implementation

    Science.gov (United States)

    Zhou, Michael M.; Tamil, Lakshman S.

    2005-02-01

    Advanced network planning concerns effective network-resource allocation for dynamic and open business environment. Planning methodologies of ASON implementation based on qualitative analysis and mathematical modeling are presented in this paper. The methodology includes method of rationalizing technology and architecture, building network and nodal models, and developing dynamic programming for multi-period deployment. The multi-layered nodal architecture proposed here can accommodate various nodal configurations for a multi-plane optical network and the network modeling presented here computes the required network elements for optimizing resource allocation.

  1. The prosa methodology for scenario development

    International Nuclear Information System (INIS)

    Grupa, J.B.

    2001-01-01

    In this paper a methodology for scenario development is proposed. The method is developed in an effort to convince ourselves (and others) that all conceivable future developments of a waste repository have been covered. To be able to assess all conceivable future developments, the method needs to be comprehensive. To convince us and others the method should be structured in such a way that the treatment of each conceivable future development is traceable. The methodology is currently being applied to two Dutch disposal designs. Preliminary results show that the elaborated method functions better than the original method. However, some elements in the method will need further refinement. (author)

  2. Health economic assessment: a methodological primer.

    Science.gov (United States)

    Simoens, Steven

    2009-12-01

    This review article aims to provide an introduction to the methodology of health economic assessment of a health technology. Attention is paid to defining the fundamental concepts and terms that are relevant to health economic assessments. The article describes the methodology underlying a cost study (identification, measurement and valuation of resource use, calculation of costs), an economic evaluation (type of economic evaluation, the cost-effectiveness plane, trial- and model-based economic evaluation, discounting, sensitivity analysis, incremental analysis), and a budget impact analysis. Key references are provided for those readers who wish a more advanced understanding of health economic assessments.

  3. Health Economic Assessment: A Methodological Primer

    Directory of Open Access Journals (Sweden)

    Steven Simoens

    2009-11-01

    Full Text Available This review article aims to provide an introduction to the methodology of health economic assessment of a health technology. Attention is paid to defining the fundamental concepts and terms that are relevant to health economic assessments. The article describes the methodology underlying a cost study (identification, measurement and valuation of resource use, calculation of costs, an economic evaluation (type of economic evaluation, the cost-effectiveness plane, trial- and model-based economic evaluation, discounting, sensitivity analysis, incremental analysis, and a budget impact analysis. Key references are provided for those readers who wish a more advanced understanding of health economic assessments.

  4. High risk process control system assessment methodology

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Venetia [Pontificia Universidade Catolica do Rio de Janeiro (PUC-Rio), RJ (Brazil); Zamberlan, Maria Cristina [National Institute of Tehnology (INT), Rio de Janeiro, RJ (Brazil). Human Reliability and Ergonomics Research Group for the Oil, Gas and Energy Sector

    2009-07-01

    The evolution of ergonomics methodology has become necessary due to the dynamics imposed by the work environment, by the increase of the need of human cooperation and by the high interaction between various sections within a company. In the last 25 years, as of studies made in the high risk process control, we have developed a methodology to evaluate these situations that focus on the assessment of activities and human cooperation, the assessment of context, the assessment of the impact of work of other sectors in the final activity of the operator, as well as the modeling of existing risks. (author)

  5. CATHARE code development and assessment methodologies

    International Nuclear Information System (INIS)

    Micaelli, J.C.; Barre, F.; Bestion, D.

    1995-01-01

    The CATHARE thermal-hydraulic code has been developed jointly by Commissariat a l'Energie Atomique (CEA), Electricite de France (EdF), and Framatorne for safety analysis. Since the beginning of the project (September 1979), development and assessment activities have followed a methodology supported by two series of experimental tests: separate effects tests and integral effects tests. The purpose of this paper is to describe this methodology, the code assessment status, and the evolution to take into account two new components of this program: the modeling of three-dimensional phenomena and the requirements of code uncertainty evaluation

  6. Intersystem LOCA risk assessment: methodology and results

    International Nuclear Information System (INIS)

    Galyean, W.J.; Kelly, D.L.; Schroeder, J.A.; Auflick, L.J.; Blackman, H.S.; Gertman, D.I.; Hanley, L.N.

    1994-01-01

    The United States Nuclear Regulatory Commission is sponsoring a research program to develop an improved understanding of the human factors, hardware and accident consequence issues that dominate the risk from an intersystem loss-of-coolant accident (ISLOCA) at a nuclear power plant. To accomplish the goals of this program, a mehtodology has been developed for estimating ISLOCA core damage frequency and risk. The steps in this methodology are briefly described, along with the results obtained from an application of the methodology at three pressurized water reactors. Also included are the results of a screening study of boiling water reactors. ((orig.))

  7. Residual radioactive material guidelines: Methodology and applications

    International Nuclear Information System (INIS)

    Yu, C.; Yuan, Y.C.; Zielen, A.J.; Wallo, A. III.

    1989-01-01

    A methodology to calculate residual radioactive material guidelines was developed for the US Department of Energy (DOE). This methodology is coded in a menu-driven computer program, RESRAD, which can be run on IBM or IBM-compatible microcomputers. Seven pathways of exposure are considered: external radiation, inhalation, and ingestion of plant foods, meat, milk, aquatic foods, and water. The RESRAD code has been applied to several DOE sites to calculate soil cleanup guidelines. This experience has shown that the computer code is easy to use and very user-friendly. 3 refs., 8 figs

  8. Theory of mind and Verstehen (understanding) methodology.

    Science.gov (United States)

    Kumazaki, Tsutomu

    2016-09-01

    Theory of mind is a prominent, but highly controversial, field in psychology, psychiatry, and philosophy of mind. Simulation theory, theory-theory and other views have been presented in recent decades, none of which are monolithic. In this article, various views on theory of mind are reviewed, and methodological problems within each view are investigated. The relationship between simulation theory and Verstehen (understanding) methodology in traditional human sciences is an intriguing issue, although the latter is not a direct ancestor of the former. From that perspective, lessons for current clinical psychiatry are drawn. © The Author(s) 2016.

  9. Queering canons. Methodological heteronormativities and queer inquietudes

    Directory of Open Access Journals (Sweden)

    Cirus Rinaldi

    2015-08-01

    Full Text Available The aim of this study is to present a series of epistemological and methodological reflections on the use of qualitative research methods in the study of non-normative sexualities. Particular emphasis will be highlighting the needs to reconsider queerly sociological oriented methods and methodology, paying attention to researcher’s ambiguous role, her body and emotions in the permanent reflexive research process and in encounters with the (co-researched. Normal 0 21 false false false ES-AR X-NONE X-NONE Methodology for evaluation of diagnostic performance

    International Nuclear Information System (INIS)

    Metz, C.E.

    1992-01-01

    Effort in this project during the past year has focused on the development, refinement, and distribution of computer software that will allow current Receiver Operating Characteristic (ROC) methodology to be used conveniently and reliably by investigators in a variety of evaluation tasks in diagnostic medicine; and on the development of new ROC methodology that will broaden the spectrum of evaluation tasks and/or experimental settings to which the fundamental approach can be applied. Progress has been limited by the amount of financial support made available to the project

  10. Constructive Analysis : A Study in Epistemological Methodology

    DEFF Research Database (Denmark)

    Ahlström, Kristoffer

    , and develops a framework for a kind of analysis that is more in keeping with recent psychological research on categorization. Finally, it is shown that this kind of analysis can be applied to the concept of justification in a manner that furthers the epistemological goal of providing intellectual guidance.......The present study is concerned the viability of the primary method in contemporary philosophy, i.e., conceptual analysis. Starting out by tracing the roots of this methodology to Platonic philosophy, the study questions whether such a methodology makes sense when divorced from Platonic philosophy...

  11. Risk-based methodology for USNRC inspections

    International Nuclear Information System (INIS)

    Wong, S.M.; Holahan, G.M.; Chung, J.W.; Johnson, M.R.

    1995-01-01

    This paper describes the development and trial applications of a risk-based methodology to enhance the inspection processes for US nuclear power plants. Objectives of risk-based methods to complement prescriptive engineering approaches in US Nuclear Regulatory Commission (USNRC) inspection programs are presented. Insights from time-dependent risk profiles of plant configurational from Individual Plant Evaluation (IPE) studies were integrated to develop a framework for optimizing inspection efforts in NRC regulatory initiatives. Lessons learned from NRC pilot applications of the risk-based methodology for evaluation of the effectiveness of operational risk management programs at US nuclear power plant sites are also discussed

  12. Automated remedial assessment methodology software system

    International Nuclear Information System (INIS)

    Whiting, M.; Wilkins, M.; Stiles, D.

    1994-11-01

    The Automated Remedial Analysis Methodology (ARAM) software system has been developed by the Pacific Northwest Laboratory to assist the U.S. Department of Energy (DOE) in evaluating cleanup options for over 10,000 contaminated sites across the DOE complex. The automated methodology comprises modules for decision logic diagrams, technology applicability and effectiveness rules, mass balance equations, cost and labor estimating factors and equations, and contaminant stream routing. ARAM is used to select technologies for meeting cleanup targets; determine the effectiveness of the technologies in destroying, removing, or immobilizing contaminants; decide the nature and amount of secondary waste requiring further treatment; and estimate the cost and labor involved when applying technologies

  13. Simplified methodology for Angra 1 containment analysis

    International Nuclear Information System (INIS)

    Neves Conti, T. das; Souza, A.L. de; Sabundjian, G.

    1991-08-01

    A simplified methodology of analysis was developed to simulate a Large Break Loss of Coolant Accident in the Angra 1 Nuclear Power Station. Using the RELAP5/MOD1, RELAP4/MOD5 and CONTEMPT-LT Codes, the time variation of pressure and temperature in the containment was analysed. The obtained data was compared with the Angra 1 Final Safety Analysis Report, and too those calculated by a Detailed Model. The results obtained by this new methodology such as the small computational time of simulation, were satisfactory when getting the preliminary evaluation of the Angra 1 global parameters. (author)

  14. Overview of the ISAM safety assessment methodology

    International Nuclear Information System (INIS)

    Simeonov, G.

    2003-01-01

    The ISAM safety assessment methodology consists of the following key components: specification of the assessment context description of the disposal system development and justification of scenarios formulation and implementation of models running of computer codes and analysis and presentation of results. Common issues run through two or more of these assessment components, including: use of methodological and computer tools, collation and use of data, need to address various sources of uncertainty, building of confidence in the individual components, as well as the overall assessment. The importance of the iterative nature of the assessment should be recognised

  15. Research methodology in recurrent pregnancy loss.

    Science.gov (United States)

    Christiansen, Ole B

    2014-03-01

    The aim of this article is to highlight pitfalls in research methodology that may explain why studies in recurrent pregnancy loss (RPL) often provide very divergent results. It is hoped that insight into this issue may help clinicians decide which published studies are the most valid. It may help researchers to eliminate methodological flaws in future studies, which may hopefully come to some kind of agreement about the usefulness of diagnostic tests and treatments in RPL. Copyright © 2014 Elsevier Inc. All rights reserved.

  16. Methodology for generating waste volume estimates

    International Nuclear Information System (INIS)

    Miller, J.Q.; Hale, T.; Miller, D.

    1991-09-01

    This document describes the methodology that will be used to calculate waste volume estimates for site characterization and remedial design/remedial action activities at each of the DOE Field Office, Oak Ridge (DOE-OR) facilities. This standardized methodology is designed to ensure consistency in waste estimating across the various sites and organizations that are involved in environmental restoration activities. The criteria and assumptions that are provided for generating these waste estimates will be implemented across all DOE-OR facilities and are subject to change based on comments received and actual waste volumes measured during future sampling and remediation activities. 7 figs., 8 tabs

  17. Methodology for the interactive graphic simulator construction

    International Nuclear Information System (INIS)

    Milian S, Idalmis; Rodriguez M, Lazaro; Lopez V, Miguel A.

    1997-01-01

    The PC-supported Interactive Graphic Simulators (IGS) have successfully been used for industrial training programs in many countries. This paper is intended to illustrate the general methodology applied by our research team for the construction of this kind of conceptual or small scale simulators. The information and tools available to achieve this goal are also described. The applicability of the present methodology was confirmed with the construction of a set of IGS for nuclear power plants operators training programs in Cuba. One of them, relating reactor kinetics, is shown and briefly described in this paper. (author). 11 refs., 3 figs

  18. Which Methodology Works Better? English Language Teachers' Awareness of the Innovative Language Learning Methodologies

    Science.gov (United States)

    Kurt, Mustafa

    2015-01-01

    The present study investigated whether English language teachers were aware of the innovative language learning methodologies in language learning, how they made use of these methodologies and the learners' reactions to them. The descriptive survey method was employed to disclose the frequencies and percentages of 175 English language teachers'…

  19. 'The methodology of positive economics' does not give us the methodology of positive economics

    NARCIS (Netherlands)

    U.I. Mäki (Uskali)

    2003-01-01

    textabstractIt is argued that rather than a well defined F-Twist, Milton Friedman's 'Methodology of positive economies' offers an F-Mix: a pool of ambiguous and inconsistent ingredients that can be used for putting together a number of different methodological positions. This concerns issues such as

  1. Photolabile linker for the synthesis of hydroxamic acids

    DEFF Research Database (Denmark)

    2013-01-01

    a hydroxylamine - functionalized photolabile linker, and the so produced hydroxylamine - functionalized photolabile solid support. The invention further provides a method for synthesizing a one-bead-one compound library of hydroxamic acid derivatives on a photolabile linker, as well as a method for screening...

  2. Methodology of characterization of radioactive graphite

    International Nuclear Information System (INIS)

    Pina, G.; Rodriguez, M.; Lara, E.; Magro, E.; Gascon, J. L.; Leganes, J. L.

    2014-01-01

    Since the dismantling of Vandellos I, ENRESA has promoted the precise knowledge of the inventory of irradiated graphite (graphite-i) through establishing methodologies for radiological characterization of the vector of radionuclides of interest and their correlations as the primary means of characterization strategy to establish the safer management of this material in its life cycle. (Author)

  3. Methodological imperfection and formalizations in scientific activity

    International Nuclear Information System (INIS)

    Svetlichny, G.

    1987-01-01

    Any mathematical formalization of scientific activity allows for imperfections in the methodology that is formalized. These can be of three types, dirty, rotten, and dammed. Restricting mathematical attention to those methods that cannot be construed to be imperfect drastically reduces the class of objects that must be analyzed, and related all other objects to these more regular ones. Examples are drawn from empirical logic

  4. Systematic Methodology for Reproducible Optimizing Batch Operation

    DEFF Research Database (Denmark)

    Bonné, Dennis; Jørgensen, Sten Bay

    2006-01-01

    This contribution presents a systematic methodology for rapid acquirement of discrete-time state space model representations of batch processes based on their historical operation data. These state space models are parsimoniously parameterized as a set of local, interdependent models. The present...

  5. Framework of Comprehensive Proliferation Resistance Evaluation Methodology

    International Nuclear Information System (INIS)

    Kim, Min Su; Jo, Seong Youn; Kim, Min Soo; Kim, Jae San; Lee, Hyun Kyung

    2007-01-01

    Civilian nuclear programs can be used as a pretext to acquire technologies, materials, equipment for military weapon programs. Consequently, international society has a strong incentive to develop a nuclear system more proliferation resistant to assure that the civilian nuclear energy system is an unattractive and least desirable route for diversion of weapon usable material. The First step developing a more proliferation resistant nuclear energy system is to develop a systematic and standardized evaluation methodology to ensure that any future nuclear energy system satisfies the proliferation resistance goals. Many attempts to develop systematic evaluation methodology have been proposed and many systems for assessing proliferation resistance have been previously studied. However, a comprehensive proliferation resistance evaluation can not be achieved by simply applying one method since complicated proliferation resistance characteristics, including inherent features and extrinsic features, should be completely evaluated. Therefore, it is necessary to develop one incorporated evaluation methodology to make up for weak points of each evaluation method. The objective of this study is to provide a framework of comprehensive proliferation resistance evaluation methodology by incorporating two generally used evaluation methods, attribute and scenario analysis

  6. Methodology to remediate a mixed waste site

    Energy Technology Data Exchange (ETDEWEB)

    Berry, J.B.

    1994-08-01

    In response to the need for a comprehensive and consistent approach to the complex issue of mixed waste management, a generalized methodology for remediation of a mixed waste site has been developed. The methodology is based on requirements set forth in the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) and the Resource Conservation and Recovery Act (RCRA) and incorporates ``lessons learned`` from process design, remediation methodologies, and remediation projects. The methodology is applied to the treatment of 32,000 drums of mixed waste sludge at the Oak Ridge K-25 Site. Process technology options are developed and evaluated, first with regard to meeting system requirements and then with regard to CERCLA performance criteria. The following process technology options are investigated: (1) no action, (2) separation of hazardous and radioactive species, (3) dewatering, (4) drying, and (5) solidification/stabilization. The first two options were eliminated from detailed consideration because they did not meet the system requirements. A quantitative evaluation clearly showed that, based on system constraints and project objectives, either dewatering or drying the mixed waste sludge was superior to the solidification/stabilization process option. The ultimate choice between the drying and the dewatering options will be made on the basis of a technical evaluation of the relative merits of proposals submitted by potential subcontractors.

  7. A methodology for performing computer security reviews

    International Nuclear Information System (INIS)

    Hunteman, W.J.

    1991-01-01

    DOE Order 5637.1, ''Classified Computer Security,'' requires regular reviews of the computer security activities for an ADP system and for a site. Based on experiences gained in the Los Alamos computer security program through interactions with DOE facilities, we have developed a methodology to aid a site or security officer in performing a comprehensive computer security review. The methodology is designed to aid a reviewer in defining goals of the review (e.g., preparation for inspection), determining security requirements based on DOE policies, determining threats/vulnerabilities based on DOE and local threat guidance, and identifying critical system components to be reviewed. Application of the methodology will result in review procedures and checklists oriented to the review goals, the target system, and DOE policy requirements. The review methodology can be used to prepare for an audit or inspection and as a periodic self-check tool to determine the status of the computer security program for a site or specific ADP system. 1 tab

  8. A methodology for performing computer security reviews

    International Nuclear Information System (INIS)

    Hunteman, W.J.

    1991-01-01

    This paper reports on DIE Order 5637.1, Classified Computer Security, which requires regular reviews of the computer security activities for an ADP system and for a site. Based on experiences gained in the Los Alamos computer security program through interactions with DOE facilities, the authors have developed a methodology to aid a site or security officer in performing a comprehensive computer security review. The methodology is designed to aid a reviewer in defining goals of the review (e.g., preparation for inspection), determining security requirements based on DOE policies, determining threats/vulnerabilities based on DOE and local threat guidance, and identifying critical system components to be reviewed. Application of the methodology will result in review procedures and checklists oriented to the review goals, the target system, and DOE policy requirements. The review methodology can be used to prepare for an audit or inspection and as a periodic self-check tool to determine the status of the computer security program for a site or specific ADP system

  9. Chronopolitics: methodological aspects of public policy research

    Directory of Open Access Journals (Sweden)

    O. A. Zubchyk

    2016-08-01

    Chronopolitics as methodology examines the role of the state in the political structure of the political entity in temporal conditions of political and administrative decisions. These issues have been discussed in the context of Chronopolitical study of historical forms of political organization. The study has proved that Chronopolitics functionally and structurally adds the conceptual and categorical apparatus of political sciences, science and public administration.

  10. Employee Turnover: An Empirical and Methodological Assessment.

    Science.gov (United States)

    Muchinsky, Paul M.; Tuttle, Mark L.

    1979-01-01

    Reviews research on the prediction of employee turnover. Groups predictor variables into five general categories: attitudinal (job satisfaction), biodata, work-related, personal, and test-score predictors. Consistent relationships between common predictor variables and turnover were found for four categories. Eight methodological problems/issues…

  11. A Methodology for Teaching Industrial Ecology

    Science.gov (United States)

    Cervantes, Gemma

    2007-01-01

    Purpose: To describe a way of teaching industrial ecology (IE) and to show some tools that may help for the IE teaching. Design/methodology/approach: In the paper, the development of lectures, practical lessons and projects on real industrial ecosystems are described. Also the teaching materials used are described. Findings: The presented…

  12. Development Methodology for an Integrated Legal Cadastre

    NARCIS (Netherlands)

    Hespanha, J.P.

    2012-01-01

    This Thesis describes the research process followed in order to achieve a development methodology applicable to the reform of cadastral systems with a legal basis. It was motivated by the author’s participation in one of the first surveying and mapping operations for a digital cadastre in Portugal,

  13. The impact of methodology in innovation measurement

    Energy Technology Data Exchange (ETDEWEB)

    Wilhelmsen, L.; Bugge, M.; Solberg, E.

    2016-07-01

    Innovation surveys and rankings such as the Community Innovation Survey (CIS) and Innovation Union Scoreboard (IUS) have developed into influential diagnostic tools that are often used to categorize countries according to their innovation performance and to legitimise innovation policies. Although a number of ongoing processes are seeking to improve existing frameworks for measuring innovation, there are large methodological differences across countries in the way innovation is measured. This causes great uncertainty regarding a) the coherence between data from innovation surveys, b) actual innovativeness of the economy, and c) the validity of research based on innovation data. Against this background we explore empirically how different survey methods for measuring innovation affect reported innovation performance. The analysis is based on a statistical exercise comparing the results from three different methodological versions of the same survey for measuring innovation in the business enterprise sector in Norway. We find striking differences in reported innovation performance depending on how the surveys are carried out methodologically. The paper concludes that reported innovation performance is highly sensitive to and strongly conditioned by methodological context. This represents a need for increased caution and awareness around data collection and research based on innovation data, and not least in terms of aggregation of data and cross-country comparison. (Author)

  14. Methodology to remediate a mixed waste site

    International Nuclear Information System (INIS)

    Berry, J.B.

    1994-08-01

    In response to the need for a comprehensive and consistent approach to the complex issue of mixed waste management, a generalized methodology for remediation of a mixed waste site has been developed. The methodology is based on requirements set forth in the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) and the Resource Conservation and Recovery Act (RCRA) and incorporates ''lessons learned'' from process design, remediation methodologies, and remediation projects. The methodology is applied to the treatment of 32,000 drums of mixed waste sludge at the Oak Ridge K-25 Site. Process technology options are developed and evaluated, first with regard to meeting system requirements and then with regard to CERCLA performance criteria. The following process technology options are investigated: (1) no action, (2) separation of hazardous and radioactive species, (3) dewatering, (4) drying, and (5) solidification/stabilization. The first two options were eliminated from detailed consideration because they did not meet the system requirements. A quantitative evaluation clearly showed that, based on system constraints and project objectives, either dewatering or drying the mixed waste sludge was superior to the solidification/stabilization process option. The ultimate choice between the drying and the dewatering options will be made on the basis of a technical evaluation of the relative merits of proposals submitted by potential subcontractors

  15. How to find out in radioisotope methodology

    International Nuclear Information System (INIS)

    Evers, C.

    1976-01-01

    The subject is dealt with in sections entitled: tracing books by topic; radioisotope methodology cross reference structure; finding a review; journals and how to trace journal articles; abstract; theses and dissertations; research and development reports; critical reviews and information summaries; data books; dictionaries and encyclopedias; guides to the literature; whom to contact; expert advice, research in progress, institutions. (U.K.)

  16. A Generalizable Methodology for Quantifying User Satisfaction

    Science.gov (United States)

    Huang, Te-Yuan; Chen, Kuan-Ta; Huang, Polly; Lei, Chin-Laung

    Quantifying user satisfaction is essential, because the results can help service providers deliver better services. In this work, we propose a generalizable methodology, based on survival analysis, to quantify user satisfaction in terms of session times, i. e., the length of time users stay with an application. Unlike subjective human surveys, our methodology is based solely on passive measurement, which is more cost-efficient and better able to capture subconscious reactions. Furthermore, by using session times, rather than a specific performance indicator, such as the level of distortion of voice signals, the effects of other factors like loudness and sidetone, can also be captured by the developed models. Like survival analysis, our methodology is characterized by low complexity and a simple model-developing process. The feasibility of our methodology is demonstrated through case studies of ShenZhou Online, a commercial MMORPG in Taiwan, and the most prevalent VoIP application in the world, namely Skype. Through the model development process, we can also identify the most significant performance factors and their impacts on user satisfaction and discuss how they can be exploited to improve user experience and optimize resource allocation.

  17. Design of formulated products: a systematic methodology

    DEFF Research Database (Denmark)

    Conte, Elisa; Gani, Rafiqul; Ng, K.M.

    2011-01-01

    /or verifies a specified set through a sequence of predefined activities (work-flow). Stage-2 and stage-3 (not presented here) deal with the planning and execution of experiments, for product validation. Four case studies have been developed to test the methodology. The computer-aided design (stage-1...

  18. Methodological pluralism and structure of sociological theory

    Directory of Open Access Journals (Sweden)

    N. L. Polyakova

    2015-01-01

    Full Text Available In the paper the historical-sociological analysis is used as a means to show the differences between theoretical and empirical sociology. There exist several, basic traditions in theoretical sociology. The investigation of their competing theoretical and methodological principles carried out in the paper; identify some fundamental features of sociological theory as a whole.

  19. EVOLVING AN EMPIRICAL METHODOLOGY DOR DETERMINING ...

    African Journals Online (AJOL)

    The uniqueness of this approach, is that it can be applied to any forest or dynamic feature on the earth, and can enjoy universal application as well. KEY WORDS: Evolving empirical methodology, innovative mathematical model, appropriate interval, remote sensing, forest environment planning and management. Global Jnl ...

  20. From experience : applying the risk diagnosing methodology

    NARCIS (Netherlands)

    Keizer, J.A.; Halman, J.I.M.; Song, X.M.

    2002-01-01

    No risk, no reward. Companies must take risks to launch new products speedily and successfully. The ability to diagnose and manage risks is increasingly considered of vital importance in high-risk innovation. This article presents the Risk Diagnosing Methodology (RDM), which aims to identify and

  1. Exploratory Practice and Soft Systems Methodology

    Science.gov (United States)

    Tajino, Akira; Smith, Craig

    2005-01-01

    This paper aims to demonstrate that Soft Systems Methodology (SSM), a soft systems approach developed in management studies (see Checkland, 1981), can be usefully linked with Exploratory Practice (EP), a form of practitioner research for language classrooms. Some compatible SSM and EP characteristics, in tandem, could enhance continual efforts to…

  2. Soft-Systems Methodology. Mendip Papers.

    Science.gov (United States)

    Kowszun, J.

    This paper provides an introduction to a particular systems-theoretical approach to problem-solving in the management of education usually referred to as soft-systems methodology (SSM), developed by Peter Checkland in the 1970s. SSM should provide a powerful tool for managers in education at any level who have a strategic role because it can be…

  3. How Six Sigma Methodology Improved Doctors' Performance

    Science.gov (United States)

    Zafiropoulos, George

    2015-01-01

    Six Sigma methodology was used in a District General Hospital to assess the effect of the introduction of an educational programme to limit unnecessary admissions. The performance of the doctors involved in the programme was assessed. Ishikawa Fishbone and 5 S's were initially used and Pareto analysis of their findings was performed. The results…

  4. Methodological pluralism in the teaching of Astronomy

    Science.gov (United States)

    de Macedo, Josué Antunes; Voelzke, Marcos Rincon

    2015-04-01

    This paper discusses the feasibility of using a teaching strategy called methodological pluralism, consisting of the use of various methodological resources in order to provide a meaningful learning. It is part of a doctoral thesis, which aims to investigate contributions to the use of traditional resources combined with digital technologies, in order to create autonomy for future teachers of Natural Sciences and Mathematics in relation to themes in Astronomy. It was offered an extension course at the "Federal Institution of Education, Science and Technology" in the North of Minas Gerais (FINMG), Campus Januaria, for thirty-two students of licentiate courses in Physics, Mathematics and Biological Sciences, involving themes of Astronomy, in order to search and contribute to improving the training of future teachers. The following aspects are used: the mixed methodology, with pre-experimental design, combined with content analysis. The results indicate the rates of students' prior knowledge in relation to Astronomy was low; meaningful learning indications of concepts related to Astronomy, and the feasibility of using digital resources Involving technologies, articulated with traditional materials in the teaching of Astronomy. This research sought to contribute to the initial teacher training, especially in relation to Astronomy Teaching, proposing new alternatives to promote the teaching of this area of knowledge, extending the methodological options of future teachers.

  5. New methodology for a person identification system

    Indian Academy of Sciences (India)

    Home; Journals; Sadhana; Volume 31; Issue 3. New methodology for a person identification system. R Bremananth A Chitra. Volume 31 Issue 3 June 2006 pp 259-276 ... Experimental results illustrate that the proposed method has been easily espoused in elections, bank transactions and other security applications.

  6. A methodology for costing man-rem

    International Nuclear Information System (INIS)

    Bieber, C.

    1976-03-01

    An attempt is made to provide a methodology for costing man-rem in a way that can be applied to station conditions, based on 1974 Pickering G.S. data. Factors taken into account were social costs, exposure costs (dose accounting, training, dosimetry) temporary labour costs, and permanent replacement labour costs. A figure of $620/ man-rem was derived. (LL)

  7. Methodological issues in lipid bilayer simulations

    NARCIS (Netherlands)

    Anezo, C; de Vries, AH; Holtje, HD; Tieleman, DP; Marrink, SJ

    2003-01-01

    Methodological issues in molecular dynamics (MD) simulations, such as the treatment of long-range electrostatic interactions or the type of pressure coupling, have important consequences for the equilibrium properties observed. We report a series of long (up to 150 ns) MD simulations of

  8. Resection methodology for PSP data processing: Recent ...

    Indian Academy of Sciences (India)

    M. Senthilkumar (Newgen Imaging) 1461 1996 Oct 15 13:05:22

    Abstract. PSP data processing, which primarily involves image alignment and image analysis, is a crucial element in obtaining accurate PSP results. There are two broad approaches to image alignment: the algebraic transformation technique, often called image-warping technique, and resection methodology, which uses ...

  9. Methodological Reflections on Working with Young Children

    DEFF Research Database (Denmark)

    Korn, Matthias

    2009-01-01

    This paper provides methodological reflections on an evolutionary and participatory software development process for designing interactive systems with children of very young age. The approach was put into practice for the design of a software environment for self-directed project management...

  10. 76 FR 71431 - Civil Penalty Calculation Methodology

    Science.gov (United States)

    2011-11-17

    ... DEPARTMENT OF TRANSPORTATION Federal Motor Carrier Safety Administration Civil Penalty Calculation... is currently evaluating its civil penalty methodology. Part of this evaluation includes a forthcoming... civil penalties. UFA takes into account the statutory penalty factors under 49 U.S.C. 521(b)(2)(D). The...

  11. Experimental methodology for obtaining sound absorption coefficients

    Directory of Open Access Journals (Sweden)

    Carlos A. Macía M

    2011-07-01

    Full Text Available Objective: the authors propose a new methodology for estimating sound absorption coefficients using genetic algorithms. Methodology: sound waves are generated and conducted along a rectangular silencer. The waves are then attenuated by the absorbing material covering the silencer’s walls. The attenuated sound pressure level is used in a genetic algorithm-based search to find the parameters of the proposed attenuation expressions that include geometric factors, the wavelength and the absorption coefficient. Results: a variety of adjusted mathematical models were found that make it possible to estimate the absorption coefficients based on the characteristics of a rectangular silencer used for measuring the attenuation of the noise that passes through it. Conclusions: this methodology makes it possible to obtain the absorption coefficients of new materials in a cheap and simple manner. Although these coefficients might be slightly different from those obtained through other methodologies, they provide solutions within the engineering accuracy ranges that are used for designing noise control systems.

  12. Diuresis renography in children: methodological aspects

    International Nuclear Information System (INIS)

    Bonnin, F.; Le Stanc, E.; Busquet, G.; Saidi, L.; Lyonnet, F.

    1995-01-01

    In paediatrics, diuresis renography is used as a method to guide clinical management of hydronephrosis or hydro-uretero-nephrosis. Various pitfalls in the technique and other errors exist and may lead to a misinterpretation of the test. The methodology for performing and interpreting the diuresis renography is discussed. (authors). 12 refs., 4 figs

  13. Methodological issues involved in conducting qualitative research ...

    African Journals Online (AJOL)

    The purpose of this article is to describe the methodological issues involved in conducting qualitative research to explore and describe nurses' experience of being directly involved with termination of pregnancies and developing guidelines for support for these nurses. The article points out the sensitivity and responsibility ...

  14. (Per)Forming Archival Research Methodologies

    Science.gov (United States)

    Gaillet, Lynee Lewis

    2012-01-01

    This article raises multiple issues associated with archival research methodologies and methods. Based on a survey of recent scholarship and interviews with experienced archival researchers, this overview of the current status of archival research both complicates traditional conceptions of archival investigation and encourages scholars to adopt…

  15. A methodology to enlarge narrow stability windows

    Energy Technology Data Exchange (ETDEWEB)

    Araujo, Ewerton M.P.; Pastor, Jorge A.S.C.; Fontoura, Sergio A.B. [Pontificia Univ. Catolica do Rio de Janeiro (PUC-Rio), RJ (Brazil). Dept. de Engenharia Civil. Grupo de Tecnologia e Engenharia de Petroleo

    2004-07-01

    The stability window in a wellbore design is defined by the difference between fracture pressure and collapse pressure. Deep water environments typically present narrow stability windows, because rocks have low strength due to under-compaction process. Often also, horizontal wells are drilled to obtain a better development of reservoirs placed in thin layers of sandstone. In this scenario, several challenges are faced when drilling in deep water. The traditional approach for predicting instabilities is to determine collapses and fractures at borehole wall. However, the initiation of rupture does not indicate that the borehole fails to perform its function as a wellbore. Thus, a methodology in which the stability window may be enlarged is desirable. This paper presents one practical analytical methodology that consists in allowing wellbore pressures smaller than the conventional collapse pressure, i.e., based upon failure on the borehole wall. This means that a collapse region (shear failure) will be developed around the borehole wall. This collapse region is pre-defined and to estimate its size is used a failure criterion. The aforementioned methodology is implemented in a user-friendly software, which can perform analyses of stress, pore pressure, formation failure, mud weight and mud salinity design for drilling in shale formations. Simulations of a wellbore drilling in a narrow stability window environment are performed to demonstrate the improvements of using the methodology. (author)

  16. From experience: applying the risk diagnosing methodology

    NARCIS (Netherlands)

    Keizer, Jimme A.; Halman, Johannes I.M.; Song, Michael

    2002-01-01

    No risk, no reward. Companies must take risks to launch new products speedily and successfully. The ability to diagnose and manage risks is increasingly considered of vital importance in high-risk innovation. This article presents the Risk Diagnosing Methodology (RDM), which aims to identify and

  17. Risk management methodology for RBMN project

    International Nuclear Information System (INIS)

    Borssatto, Maria F.B.; Tello, Cledola C.O.; Uemura, George

    2013-01-01

    RBMN Project has been developed to design, construct and commission a national repository to dispose the low- and intermediate-level radioactive wastes from the operation of nuclear power plants and other industries that use radioactive sources and materials. Risk is a characteristic of all projects. The risks arise from uncertainties due to assumptions associated with the project and the environment in which it is executed. Risk management is the method by which these uncertainties are systematically monitored to ensure that the objectives of the project will be achieved. Considering the peculiarities of the Project, that is, comprehensive scope, multidisciplinary team, apparently polemic due to the unknowing of the subject by the stake holders, especially the community, it is being developed a specific methodology for risk management of this Project. This methodology will be critical for future generations who will be responsible for the final stages of the repository. It will provide greater guarantee to the processes already implemented and will maintain a specific list of risks and solutions for this Project, ensuring safety and security of the repository throughout its life cycle that is the planned to last at least three hundred years. This paper presents the tools and processes already defined, management actions aimed at developing a culture of proactive risk in order to minimize threats to this Project and promote actions that bring opportunities to its success. The methodology is based on solid research on the subject, considering methodologies already established and globally recognized as best practices for project management. (author)

  18. Methodological remarks on studying prehistoric Greek religion

    Directory of Open Access Journals (Sweden)

    Petra Pakkanen

    1999-01-01

    Full Text Available This paper presents a methodological approach to the study of Greek religion of the period which lacks written documents, i.e. prehistory. The assumptions and interpretations of religion of that time have to be based on archaeological material. How do we define religion and cultic activity on the basis of primary archaeological material from this period, and which are the methodological tools for this difficult task? By asking questions on the nature and definition of religion and culture scholars of religion have provided us with some methodological apparatus to approach religion of the past in general, but there are models developed by archaeologists as well. Critical combination of these methodological tools leads to the best possible result. Archaeology studies the material culture of the past. History of religion studies the spiritual culture of the past. In the background the two have important theoretical and even philosophical speculations since they both deal with meanings (of things or practices and with interpretation.

  19. Examining emotional expressions in discourse: methodological considerations

    Science.gov (United States)

    Hufnagel, Elizabeth; Kelly, Gregory J.

    2017-10-01

    This methodological paper presents an approach for examining emotional expressions through discourse analysis and ethnographic methods. Drawing on trends in the current literature in science education, we briefly explain the importance of emotions in science education and examine the current research methodologies used in interactional emotion studies. We put forth and substantiate a methodological approach that attends to the interactional, contextual, intertextual, and consequential aspects of emotional expressions. By examining emotional expressions in the discourse in which they are constructed, emotional expressions are identified through semantics, contextualization, and linguistic features. These features make salient four dimensions of emotional expressions: aboutness, frequency, type, and ownership. Drawing on data from a large empirical study of pre-service elementary teachers' emotional expressions about climate change in a science course, we provide illustrative examples to describe what counts as emotional expressions in situ. In doing so we explain how our approach makes salient the nuanced nature of such expressions as well as the broader discourse in which they are constructed and the implications for researching emotional expressions in science education discourse. We suggest reasons why this discourse orientated research methodology can contribute to the interactional study of emotions in science education contexts.

  20. Monitoring sustainable biomass flows : General methodology development

    NARCIS (Netherlands)

    Goh, Chun Sheng; Junginger, Martin; Faaij, André

    Transition to a bio-based economy will create new demand for biomass, e.g. the increasing use of bioenergy, but the impacts on existing markets are unclear. Furthermore, there is a growing public concern on the sustainability of biomass. This study proposes a methodological framework for mapping

  1. Review of PRA methodology for LMFBR

    International Nuclear Information System (INIS)

    Yang, J. E.

    1999-02-01

    Probabilistic Risk Assessment (PRA) has been widely used as a tool to evaluate the safety of NPPs (Nuclear Power Plants), which are in the design stage as well as in operation. Recently, PRA becomes one of the licensing requirements for many existing and new NPPs. KALIMER is a Liquid Metal Fast Breeder Reactor (LMFBR) being developed by KAERI. Since the design concept of KALIMER is similar to that of the PRISM plant developed by GE, it would be appropriate to review the PRA methodology of PRISM as the first step of KALIMER PRA. Hence, in this report summarizes the PRA methodology of PRISM plant, and the required works for the PSA of KALIMER based on the reviewed results. The PRA technology of PRISM plant consists of following five major tasks: (1) development of initiating event list, (2) development of system event tree, (3) development of core response event tree, (4) development of containment response event tree, and (5) consequences and risk estimation. The estimated individual and societal risk measures show that the risk from a PRISM module is substantially less than the NRC goal. Each task is compared to the PRA methodology of Light Water Reactor (LWR)/Pressurized Heavy Water Reactor (PHWR). In the report, each task of PRISM PRA methodology is reviewed and compared to the corresponding part of LWR/PHWR PSA performed in Korea. The parts that are not modeled appropriately in PRISM PRA are identified, and the recommendations for KALIMER PRA are stated. (author). 14 refs., 9 tabs., 4 figs

  2. Methodological Issues on Climate Change Mitigation Studies

    DEFF Research Database (Denmark)

    Sørensen, Lene; Borges, Pedro Castro; Vidal, Rene Victor Valqui

    1999-01-01

    This paper uses national greenhouse gas emission abatement costing studies as a case to discuss influential factors that determine their outcome and achievement. Costing studies are seen as part of an interconnected whole social process where actors (decision makers, clients, facilitators, expert...... such methodologies to case studies is seen as one way of improving the chances of understanding and handling environmental problems...

  3. MODERN METHODOLOGIES TOWARDS A SUSTAINABLE FLEXIBLE PRODUCTION

    Directory of Open Access Journals (Sweden)

    Babalâc Catalin Cristian

    2014-07-01

    Full Text Available The present paper brings into the light several methodologies used today inside the companies to organize their process in order to respond to continuously evolving and changing customer behavior. It follows the historical timeline from the moment when production was a simple craft to the moment where mass production has been transformed in mass customization.

  4. Testing Methodology in the Student Learning Process

    Science.gov (United States)

    Gorbunova, Tatiana N.

    2017-01-01

    The subject of the research is to build methodologies to evaluate the student knowledge by testing. The author points to the importance of feedback about the mastering level in the learning process. Testing is considered as a tool. The object of the study is to create the test system models for defence practice problems. Special attention is paid…

  5. Development of seismic PSA methodology at JAERI

    International Nuclear Information System (INIS)

    Muramatsu, K.; Ebisawa, K.; Matsumoto, K.; Oikawa, T.; Kondo, M.

    1995-01-01

    The Japan Atomic Energy Research Institute (JAERI) is developing a methodology for seismic probabilistic safety assessment (PSA) of nuclear power plants, aiming at providing a set of procedures, computer codes and data suitable for performing seismic PSA in Japan. In order to demonstrate the usefulness of JAERI's methodology and to obtain better understanding on the controlling factors of the results of seismic PSAs, a seismic PSA for a BWR is in progress. In the course of this PSA, various improvements were made on the methodology. In the area of the hazard analysis, the application of the current method to the model plant site is being carried out. In the area of response analysis, the response factor method was modified to consider the non-linear response effect of the building. As for the capacity evaluation of components, since capacity data for PSA in Japan are very scarce, capacities of selected components used in Japan were evaluated. In the systems analysis, the improvement of the SECOM2 code was made to perform importance analysis and sensitivity analysis for the effect of correlation of responses and correlation of capacities. This paper summarizes the recent progress of the seismic PSA research at JAERI with emphasis on the evaluation of component capacity and the methodology improvement of systems reliability analysis. (author)

  6. A Methodology for Safety Culture Impact Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Han, Kiyoon; Jae, Moosung [Hanyang Univ., Seoul (Korea, Republic of)

    2014-05-15

    The purpose of this study is to develop methodology for assessing safety culture impact on nuclear power plants. A new methodology for assessing safety culture impact index has been developed and applied for the reference nuclear power plants. The developed SCII model might contribute to comparing the level of safety culture among nuclear power plants as well as to improving the safety of nuclear power plants. Safety culture is defined to be fundamental attitudes and behaviors of the plant staff which demonstrate that nuclear safety is the most important consideration in all activities conducted in nuclear power operation. Through several accidents of nuclear power plant including the Fukusima Daiichi in 2011 and Chernovyl accidents in 1986, the safety of nuclear power plant is emerging into a matter of interest. From the accident review report, it can be easily found out that safety culture is important and one of dominant contributors to accidents. However, the impact methodology for assessing safety culture has not been established analytically yet. It is difficult to develop the methodology for assessing safety culture impact quantitatively.

  7. Theories, Models and Methodology in Writing Research

    NARCIS (Netherlands)

    Rijlaarsdam, Gert; Bergh, van den Huub; Couzijn, Michel

    1996-01-01

    Theories, Models and Methodology in Writing Research describes the current state of the art in research on written text production. The chapters in the first part offer contributions to the creation of new theories and models for writing processes. The second part examines specific elements of the

  8. Evolution of courseware development methodology : recent issues

    NARCIS (Netherlands)

    Moonen, J.C.M.M.; Schoenmaker, Jan

    1992-01-01

    To improve the quality of courseware products and the efficiency of the courseware development process, a methodology based upon "courseware engineering", being a combination of instructional systems development and software engineering, has emerged over the last 10¿15 years. Recently, software

  9. Methodology for quantitative evaluation of diagnostic performance

    International Nuclear Information System (INIS)

    Metz, C.

    1981-01-01

    Of various approaches that might be taken to the diagnostic performance evaluation problem, Receiver Operating Characteristic (ROC) analysis holds great promise. Further development of the methodology for a unified, objective, and meaningful approach to evaluating the usefulness of medical imaging procedures is done by consideration of statistical significance testing, optimal sequencing of correlated studies, and analysis of observer performance

  10. Study of methodology diversification in diagnostics

    International Nuclear Information System (INIS)

    Suda, Kazunori; Yonekawa, Tsuyoshi; Yoshikawa, Shinji; Hasegawa, Makoto

    1999-03-01

    There are several research activities to enhance safety and reliability of nuclear power plant operation and maintenance. We are developing a concept of an autonomous operation system where the role of operators is replaced with artificial intelligence. The purpose of the study described in this report is to develop a operator support system in abnormal plant situations. Conventionally, diagnostic modules based on individual methodology such as expert system have been developed and verified. In this report, methodology diversification is considered to integrate diagnostic modules which performance are confirmed using information processing technique. Technical issues to be considered in diagnostic methodology diversification are; 1)reliability of input data, 2)diversification of knowledge models, algorithms and reasoning schemes, 3)mutual complement and robustness. The diagnostic module utilizing the different approaches defined along with strategy of diversification was evaluated using fast breeder plant simulator. As a result, we confirmed that any singular diagnostic module can not meet accuracy criteria for the entire set of anomaly events. In contrast with this, we confirmed that every abnormality could be precisely diagnosed by a mutual combination. In other words, legitimacy of approach selected by strategy of diversification was shown, and methodology diversification attained clear efficiency for abnormal diagnosis. It has been also confirmed that the diversified diagnostic system implemented in this study is able to maintain its accuracy even in case that encountered scale of abnormality is different from reference cases embedded in the knowledge base. (author)

  11. Three-dimensional RAMA fluence methodology benchmarking

    International Nuclear Information System (INIS)

    Baker, S. P.; Carter, R. G.; Watkins, K. E.; Jones, D. B.

    2004-01-01

    This paper describes the benchmarking of the RAMA Fluence Methodology software, that has been performed in accordance with U. S. Nuclear Regulatory Commission Regulatory Guide 1.190. The RAMA Fluence Methodology has been developed by TransWare Enterprises Inc. through funding provided by the Electric Power Research Inst., Inc. (EPRI) and the Boiling Water Reactor Vessel and Internals Project (BWRVIP). The purpose of the software is to provide an accurate method for calculating neutron fluence in BWR pressure vessels and internal components. The Methodology incorporates a three-dimensional deterministic transport solution with flexible arbitrary geometry representation of reactor system components, previously available only with Monte Carlo solution techniques. Benchmarking was performed on measurements obtained from three standard benchmark problems which include the Pool Criticality Assembly (PCA), VENUS-3, and H. B. Robinson Unit 2 benchmarks, and on flux wire measurements obtained from two BWR nuclear plants. The calculated to measured (C/M) ratios range from 0.93 to 1.04 demonstrating the accuracy of the RAMA Fluence Methodology in predicting neutron flux, fluence, and dosimetry activation. (authors)

  12. Methodologies and Methods for User Behavioral Research.

    Science.gov (United States)

    Wang, Peiling

    1999-01-01

    Discusses methodological issues in empirical studies of information-related behavior in six specific research areas: information needs and uses; information seeking; relevance judgment; online searching (including online public access catalog, online database, and the Web); human-system interactions; and reference transactions. (Contains 191…

  13. A Methodology for Safety Culture Impact Assessment

    International Nuclear Information System (INIS)

    Han, Kiyoon; Jae, Moosung

    2014-01-01

    The purpose of this study is to develop methodology for assessing safety culture impact on nuclear power plants. A new methodology for assessing safety culture impact index has been developed and applied for the reference nuclear power plants. The developed SCII model might contribute to comparing the level of safety culture among nuclear power plants as well as to improving the safety of nuclear power plants. Safety culture is defined to be fundamental attitudes and behaviors of the plant staff which demonstrate that nuclear safety is the most important consideration in all activities conducted in nuclear power operation. Through several accidents of nuclear power plant including the Fukusima Daiichi in 2011 and Chernovyl accidents in 1986, the safety of nuclear power plant is emerging into a matter of interest. From the accident review report, it can be easily found out that safety culture is important and one of dominant contributors to accidents. However, the impact methodology for assessing safety culture has not been established analytically yet. It is difficult to develop the methodology for assessing safety culture impact quantitatively

  14. Science, technology and society : a methodological perspective

    NARCIS (Netherlands)

    Vries, de M.J.; Vries, de M.J.; Tamir, A.

    1997-01-01

    Methodology offers a perspective on technology that differs from a historical or sociological one. It focuses on the scientific, technological and social factors that are to be taken into account in technological developments. Other approaches tend to focus on actors rather than factors. The

  15. App Studies : Platform Rules and Methodological Challenges

    NARCIS (Netherlands)

    Gerlitz, C.; Helmond, A.; van der Vlist, F.; Weltevrede, E.; De Groote, S.; Majmundar, P.

    2016-01-01

    The panel engages with conceptual and methodological challenges within a specific area of ‘internet rules’, namely the space of mobile apps. Whereas the web was set out to function as a ‘generative’ and open technology facilitating the production of unanticipated services and applications, the

  16. [Qualitative research methodology in health care].

    Science.gov (United States)

    Bedregal, Paula; Besoain, Carolina; Reinoso, Alejandro; Zubarew, Tamara

    2017-03-01

    Health care research requires different methodological approaches such as qualitative and quantitative analyzes to understand the phenomena under study. Qualitative research is usually the least considered. Central elements of the qualitative method are that the object of study is constituted by perceptions, emotions and beliefs, non-random sampling by purpose, circular process of knowledge construction, and methodological rigor throughout the research process, from quality design to the consistency of results. The objective of this work is to contribute to the methodological knowledge about qualitative research in health services, based on the implementation of the study, “The transition process from pediatric to adult services: perspectives from adolescents with chronic diseases, caregivers and health professionals”. The information gathered through the qualitative methodology facilitated the understanding of critical points, barriers and facilitators of the transition process of adolescents with chronic diseases, considering the perspective of users and the health team. This study allowed the design of a transition services model from pediatric to adult health services based on the needs of adolescents with chronic diseases, their caregivers and the health team.

  17. Practical implications of rapid development methodologies

    CSIR Research Space (South Africa)

    Gerber, A

    2007-11-01

    Full Text Available as the acceleration of the system development phases through an iterative construction approach. These methodologies also claim to manage the changing nature of requirements. However, during the development of large and complex systems by a small and technically...

  18. Essential methodological considerations when using grounded theory.

    Science.gov (United States)

    Achora, Susan; Matua, Gerald Amandu

    2016-07-01

    To suggest important methodological considerations when using grounded theory. A research method widely used in nursing research is grounded theory, at the centre of which is theory construction. However, researchers still struggle with some of its methodological issues. Although grounded theory is widely used to study and explain issues in nursing practice, many researchers are still failing to adhere to its rigorous standards. Researchers should articulate the focus of their investigations - the substantive area of interest as well as the focal population. This should be followed by a succinct explanation of the strategies used to collect and analyse data, supported by clear coding processes. Finally, the resolution of the core issues, including the core category and related categories, should be explained to advance readers' understanding. Researchers should endeavour to understand the tenets of grounded theory. This enables 'neophytes' in particular to make methodological decisions that will improve their studies' rigour and fit with grounded theory. This paper complements the current dialogue on improving the understanding of grounded theory methodology in nursing research. The paper also suggests important procedural decisions researchers need to make to preserve their studies' scientific merit and fit with grounded theory.

  19. A Design Methodology for Medical Processes.

    Science.gov (United States)

    Ferrante, Simona; Bonacina, Stefano; Pozzi, Giuseppe; Pinciroli, Francesco; Marceglia, Sara

    2016-01-01

    Healthcare processes, especially those belonging to the clinical domain, are acknowledged as complex and characterized by the dynamic nature of the diagnosis, the variability of the decisions made by experts driven by their experiences, the local constraints, the patient's needs, the uncertainty of the patient's response, and the indeterminacy of patient's compliance to treatment. Also, the multiple actors involved in patient's care need clear and transparent communication to ensure care coordination. In this paper, we propose a methodology to model healthcare processes in order to break out complexity and provide transparency. The model is grounded on a set of requirements that make the healthcare domain unique with respect to other knowledge domains. The modeling methodology is based on three main phases: the study of the environmental context, the conceptual modeling, and the logical modeling. The proposed methodology was validated by applying it to the case study of the rehabilitation process of stroke patients in the specific setting of a specialized rehabilitation center. The resulting model was used to define the specifications of a software artifact for the digital administration and collection of assessment tests that was also implemented. Despite being only an example, our case study showed the ability of process modeling to answer the actual needs in healthcare practices. Independently from the medical domain in which the modeling effort is done, the proposed methodology is useful to create high-quality models, and to detect and take into account relevant and tricky situations that can occur during process execution.

  20. Towards an MDA-based development methodology

    NARCIS (Netherlands)

    Gavras, Anastasius; Belaunde, Mariano; Ferreira Pires, Luis; Andrade Almeida, João; Oquendo, Flavio; Warboys, Brian C.; Morrison, Ron

    2004-01-01

    This paper proposes a development methodology for distributed applications based on the principles and concepts of the Model-Driven Architecture (MDA). The paper identifies phases and activities of an MDA-based development trajectory, and defines the roles and products of each activity in accordance

  1. Pressurized water reactor fuel rod design methodology

    International Nuclear Information System (INIS)

    Silva, A.T.; Esteves, A.M.

    1988-08-01

    The fuel performance program FRAPCON-1 and the structural finite element program SAP-IV are applied in a pressurized water reactor fuel rod design methodology. The applied calculation procedure allows to dimension the fuel rod components and characterize its internal pressure. (author) [pt

  2. Methodology for gathering nuclear energy literature

    International Nuclear Information System (INIS)

    Lambert, Maria B.M.A.

    1996-01-01

    Several activities related to gathering information and documents -conventional and non-conventional primary literature - to include in a bibliographic nuclear energy database are described and arranged, using as model the communication and information process in science and technology and the analysis of the indexed documents in the database. Methodological steps are identified and a collecting system model is presented. 112 refs., 4 tabs

  3. Methodological Naturalism Under Attack | Ruse | South African ...

    African Journals Online (AJOL)

    Recently the Intelligent Design movement has been arguing against methodological naturalism, and in this project they have been joined by the Christian philosopher Alvin Plantinga. In this paper I examine Plantinga\\'s arguments and conclude not only that they are not well taken, but that he does no good service to his ...

  4. Project Management Methodology in Human Resource Management

    Science.gov (United States)

    Josler, Cheryl; Burger, James

    2005-01-01

    When charged with overseeing a project, how can one ensure that the project will be completed on time, within budget, and to the satisfaction of everyone involved? In this article, the authors examine project management methodology as a means of ensuring that projects are conducted in a disciplined, well-managed and consistent manner that serves…

  5. Basic Project Management Methodologies for Survey Researchers.

    Science.gov (United States)

    Beach, Robert H.

    To be effective, project management requires a heavy dependence on the document, list, and computational capability of a computerized environment. Now that microcomputers are readily available, only the rediscovery of classic project management methodology is required for improved resource allocation in small research projects. This paper provides…

  6. Preparation methodology of radiation - curable resin

    International Nuclear Information System (INIS)

    Dahlan bin Haji Mohd; Hussin bin Mohd Nor; Mohamad Hilmi bin Mahmood.

    1989-01-01

    Two types of unsaturated polyester have been prepared according to normal alkyd methods of preparation. In this work the emphasis has been given to the preparation methodology of unsaturated polyesters in styrene. Their molecule weight distributions fall between normal alkyd's i.e. 2500 to 3500. (author)

  7. State debt dynamics: the methodological aspect

    Directory of Open Access Journals (Sweden)

    Crijanovschi Stela

    2013-02-01

    Full Text Available In this article, it’s presented the methodological aspect of the state debt. The issue of supplementary money in order to cover the state debt is one of the factors that generate inflation, which respectively has a negative impact on the economic development

  8. STATE DEBT DYNAMICS: THE METHODOLOGICAL ASPECT

    Directory of Open Access Journals (Sweden)

    Stela CRIJANOVSCHI

    2013-02-01

    Full Text Available In this article, it’s presented the methodological aspect of the state debt. The issue of supplementary money in order to cover the state debt is one of the factors that generate inflation, which respectively has a negative impact on the economic development.

  9. The methodological defense of realism scrutinized.

    Science.gov (United States)

    Wray, K Brad

    2015-12-01

    I revisit an older defense of scientific realism, the methodological defense, a defense developed by both Popper and Feyerabend. The methodological defense of realism concerns the attitude of scientists, not philosophers of science. The methodological defense is as follows: a commitment to realism leads scientists to pursue the truth, which in turn is apt to put them in a better position to get at the truth. In contrast, anti-realists lack the tenacity required to develop a theory to its fullest. As a consequence, they are less likely to get at the truth. My aim is to show that the methodological defense is flawed. I argue that a commitment to realism does not always benefit science, and that there is reason to believe that a research community with both realists and anti-realists in it may be better suited to advancing science. A case study of the Copernican Revolution in astronomy supports this claim. Copyright © 2015 Elsevier Ltd. All rights reserved.

  10. Supplement to a Methodology for Succession Planning for Technical Experts

    Energy Technology Data Exchange (ETDEWEB)

    Kirk, Bernadette Lugue [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Cain, Ronald A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Agreda, Carla L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2017-11-01

    This report complements A Methodology for Succession Planning for Technical Experts (Ron Cain, Shaheen Dewji, Carla Agreda, Bernadette Kirk, July 2017), which describes a draft methodology for identifying and evaluating the loss of key technical skills at nuclear operations facilities. This report targets the methodology for identifying critical skills, and the methodology is tested through interviews with selected subject matter experts.

  11. EVALUATION OF THE GRAI INTEGRATED METHODOLOGY AND THE IMAGIM SUPPORTWARE

    Directory of Open Access Journals (Sweden)

    J.M.C. Reid

    2012-01-01

    Full Text Available This paper describes the GRAI Integrated Methodology and identifies the need for computer tools to support enterprise modelling,design and integration. The IMAGIM tool is then evaluated in terms of its ability to support the GRAI Integrated Methodology. The GRAI Integrated Methodology is an Enterprise Integration methodology developed to support the design of CIM systems . The GRAI Integrated Methodology consists of the GRAI model and a structured approach. The latest addition to the methodology is the IMAGIM software tool developed by the GRAI research group for the specific purpose of supporting the methodology.

  12. Selection methodology for LWR safety programs and proposals. Volume 2. Methodology application

    International Nuclear Information System (INIS)

    Ritzman, R.L.; Husseiny, A.A.

    1980-08-01

    The results of work done to update and apply a methodology for selecting (prioritizing) LWR safety technology R and D programs are described. The methodology is based on multiattribute utility (MAU) theory. Application of the methodology to rank-order a group of specific R and D programs included development of a complete set of attribute utility functions, specification of individual attribute scaling constants, and refinement and use of an interactive computer program (MAUP) to process decision-maker inputs and generate overall (multiattribute) program utility values. The output results from several decision-makers are examined for consistency and conclusions and recommendations regarding general use of the methodology are presented. 3 figures, 18 tables

  13. Comparison Of Irms Delhi Methodology With Who Methodology On Immunization Coverage

    Directory of Open Access Journals (Sweden)

    Singh Padam

    1996-01-01

    Full Text Available Research question: What are the merits of IRMS Model over WHO Model for Coverage Evaluation Survey? Which method is superior and appropriate for coverage evolution survey of immunization in our setting? Objective: To compare IRMS Delhi methodology with WHO methodology on Immunization Coverage. Study Design: Cross-Sectional Setting: Urban and Rural both. Participants: Mothers& Children Sample Size: 300 children between 1-2 years and 300 mothers in rural areas and 75 children and 75 mothers in urban areas. Study Variables: Rural, Urban, Cast-Group, Size of the stratum, Literacy, Sex and Cost effectiveness. Outcome Variables: Coverage level of immunization. Analysis: Routine Statistical Analysis. Results: IRMS developed methodology scores better rating over WHO methodology, especially when coverage evolution is attempted in medium size villages with existence of socio-economic seggregation-which remains the main characteristic of the Indian villages.

  14. An overview of performance assessment methodology

    International Nuclear Information System (INIS)

    Hongnian Jow

    2010-01-01

    The definition of performance assessment (PA) within the context of a geologic repository program is a post-closure safety assessment; a system analysis of hazards associated with the facility and the ability of the site and the design of the facility to provide for the safety functions. For the last few decades, PA methodology bas been developed and applied to different waste disposal programs around the world. PA has been used in the safety analyses for waste disposal repositories for low-level waste, intermediate level waste, and high-level waste including spent nuclear fuels. This paper provides an overview of the performance assessment methodology and gives examples of its applications for the Yucca Mountain Project. (authors)

  15. Theoretical and methodological approaches in discourse analysis.

    Science.gov (United States)

    Stevenson, Chris

    2004-01-01

    Discourse analysis (DA) embodies two main approaches: Foucauldian DA and radical social constructionist DA. Both are underpinned by social constructionism to a lesser or greater extent. Social constructionism has contested areas in relation to power, embodiment, and materialism, although Foucauldian DA does focus on the issue of power Embodiment and materialism may be especially relevant for researchers of nursing where the physical body is prominent. However, the contested nature of social constructionism allows a fusion of theoretical and methodological approaches tailored to a specific research interest. In this paper, Chris Stevenson suggests a framework for working out and declaring the DA approach to be taken in relation to a research area, as well as to aid anticipating methodological critique. Method, validity, reliability and scholarship are discussed from within a discourse analytic frame of reference.

  16. Application of PRINCE2 Project Management Methodology

    Directory of Open Access Journals (Sweden)

    Vaníčková Radka

    2017-09-01

    Full Text Available The methodology describes the principle of setting a project in PRINCE2 project management. The main aim of the paper is to implement PRINCE2 methodology to be used in an enterprise in the service industry. A partial aim is to choose a supplier of the project among new travel guides. The result of the project activity is a sight-seeing tour/service more attractive for customers in the tourism industry and a possible choice of new job opportunities. The added value of the article is the description of applying the principles, processes and topics of PRINCE2 project management so that they might be used in the field.

  17. Vertical Footbridge Vibrations: The Response Spectrum Methodology

    DEFF Research Database (Denmark)

    Georgakis, Christos; Ingólfsson, Einar Thór

    2008-01-01

    In this paper, a novel, accurate and readily codifiable methodology for the prediction of vertical footbridge response is presented. The methodology is based on the well-established response spectrum approach used in the majority of the world’s current seismic design codes of practice. The concept...... of a universally applicable reference response spectrum is introduced, from which the pedestrian-induced vertical response of any footbridge may be determined, based on a defined “event” and the probability of occurrence of that event. A series of Monte Carlo simulations are undertaken for the development...... period is introduced and its implication on the calculation of footbridge response is discussed. Finally, a brief comparison is made between the theoretically predicted pedestrian-induced vertical response of an 80m long RC footbridge (as an example) and actual field measurements. The comparison shows...

  18. Comparative Studies: historical, epistemological and methodological notes

    Directory of Open Access Journals (Sweden)

    Juan Ignacio Piovani

    2017-09-01

    Full Text Available In this article some historical, epistemological and methodological issues related to comparative studies in the social sciences are addressed, with specific reference to the field of education. The starting point is a discussion of the meaning of comparison, its logical structure and its presence in science and in everyday life. It follows the presentation and critical appraisal of the perspectives regarding comparison as a scientific method. It is argued that, even rejecting this restrictive meaning of comparison as a method, there is some consensus on the specificity of comparative studies within the social sciences. And in relation to them, the article address in more detail those studies that can be defined as trans-contextual (cross-national and cross-cultural, with emphasis on the main methodological and technical challenges they face. The socio-historical comparative perspective, which has gained importance in recent years in the field of education, is also discussed.

  19. Case Study Methodology and Homelessness Research

    Directory of Open Access Journals (Sweden)

    Jill Pable

    2013-10-01

    Full Text Available This paper describes the potential suitability of case study methodology for inquiry with the homeless population. It references a research study that uses case study research method to build theory. This study's topic is the lived experience of destitute individuals who reside in homeless shelters, and explores the homeless shelter built environment's potential influence on resident satisfaction and recovery. Case study methodology may be appropriate because it explores real-life contextual issues that characterize homelessness and can also accommodate the wide range of homeless person demographics that make this group difficult to study in a generalized fashion. Further, case study method accommodates the need within research in this area to understand individualized treatments as a potential solution for homelessness.

  20. Argumentation: A Methodology to Facilitate Critical Thinking.

    Science.gov (United States)

    Makhene, Agnes

    2017-06-20

    Caring is a difficult nursing activity that involves a complex nature of a human being in need of complex decision-making and problem solving through the critical thinking process. It is mandatory that critical thinking is facilitated in general and in nursing education particularly in order to render care in diverse multicultural patient care settings. This paper aims to describe how argumentation can be used to facilitate critical thinking in learners. A qualitative, exploratory and descriptive design that is contextual was used. Purposive sampling method was used to draw a sample and Miles and Huberman methodology of qualitative analysis was used to analyse data. Lincoln and Guba's strategies were employed to ensure trustworthiness, while Dhai and McQuoid-Mason's principles of ethical consideration were used. Following data analysis the findings were integrated within literature which culminated into the formulation of guidelines that can be followed when using argumentation as a methodology to facilitate critical thinking.

  1. Theoretical and methodological approaches in discourse analysis.

    Science.gov (United States)

    Stevenson, Chris

    2004-10-01

    Discourse analysis (DA) embodies two main approaches: Foucauldian DA and radical social constructionist DA. Both are underpinned by social constructionism to a lesser or greater extent. Social constructionism has contested areas in relation to power, embodiment, and materialism, although Foucauldian DA does focus on the issue of power. Embodiment and materialism may be especially relevant for researchers of nursing where the physical body is prominent. However, the contested nature of social constructionism allows a fusion of theoretical and methodological approaches tailored to a specific research interest. In this paper, Chris Stevenson suggests a frame- work for working out and declaring the DA approach to be taken in relation to a research area, as well as to aid anticipating methodological critique. Method, validity, reliability and scholarship are discussed from within a discourse analytic frame of reference.

  2. Q methodology, risk training and quality management.

    Science.gov (United States)

    McKeown, M; Hinks, M; Stowell-Smith, M; Mercer, D; Forster, J

    1999-01-01

    The results of a Q methodological study of professional understandings of the notion of risk in mental health services within the UK are discussed in relation to the relevance for staff training and quality assurance. The study attempted to access the diversity of understandings of risk issues amongst a multi-professional group of staff (n = 60) attending inter-agency risk training workshops in 1998. Q methodology is presented as both an appropriate means for such inquiry and as a novel experiential technique for training purposes. A tentative argument is advanced that the qualitative accounts generated by Q research could assist in systematic reviews of quality, complementing the singularly quantitative approaches typically represented in the audit process.

  3. Verbal protocols as methodological resources: research evidence

    Directory of Open Access Journals (Sweden)

    Alessandra Baldo

    2012-01-01

    Full Text Available This article aims at reflecting on the use of verbal protocols as a methodological resource in qualitative research, more specifically on the aspect regarded as the main limitation of a study about lexical inferencing in L2 (BALDO; VELASQUES, 2010: its subjective trait. The article begins with a brief literature review on protocols, followed by a description of the study in which they were employed as methodological resources. Based on that, protocol subjectivity is illustrated through samples of unparalleled data classification, carried out independently by two researchers. In the final section, the path followed to minimize the problem is presented, intending to contribute to improve efficiency in the use of verbal protocols in future research.

  4. A methodology for Electric Power Load Forecasting

    Directory of Open Access Journals (Sweden)

    Eisa Almeshaiei

    2011-06-01

    Full Text Available Electricity demand forecasting is a central and integral process for planning periodical operations and facility expansion in the electricity sector. Demand pattern is almost very complex due to the deregulation of energy markets. Therefore, finding an appropriate forecasting model for a specific electricity network is not an easy task. Although many forecasting methods were developed, none can be generalized for all demand patterns. Therefore, this paper presents a pragmatic methodology that can be used as a guide to construct Electric Power Load Forecasting models. This methodology is mainly based on decomposition and segmentation of the load time series. Several statistical analyses are involved to study the load features and forecasting precision such as moving average and probability plots of load noise. Real daily load data from Kuwaiti electric network are used as a case study. Some results are reported to guide forecasting future needs of this network.

  5. Proposed Methodology for Establishing Area of Applicability

    International Nuclear Information System (INIS)

    Broadhead, B.L.; Hopper, C.M.; Parks, C.V.

    1999-01-01

    This paper presents the application of sensitivity and uncertainty (S/U) analysis methodologies to the data validation tasks of a criticality safety computational study. The S/U methods presented are designed to provide a formal means of establishing the area (or range) of applicability for criticality safety data validation studies. The development of parameters that are analogous to the standard trending parameters form the key to the technique. These parameters are the so-called D parameters, which represent the differences by energy group of S/U-generated sensitivity profiles, and c parameters, which are the k correlation coefficients, each of which give information relative to the similarity between pairs of selected systems. The use of a Generalized Linear Least-Squares Methodology (GLLSM) tool is also described in this paper. These methods and guidelines are also applied to a sample validation for uranium systems with enrichments greater than 5 wt %

  6. The intersections between TRIZ and forecasting methodology

    Directory of Open Access Journals (Sweden)

    Georgeta BARBULESCU

    2010-12-01

    Full Text Available The authors’ intention is to correlate the basic knowledge in using the TRIZ methodology (Theory of Inventive Problem Solving or in Russian: Teoriya Resheniya Izobretatelskikh Zadatch as a problem solving tools meant to help the decision makers to perform more significant forecasting exercises. The idea is to identify the TRIZ features and instruments (40 inventive principles, i.e. for putting in evidence the noise and signal problem, for trend identification (qualitative and quantitative tendencies and support tools in technological forecasting, to make the decision-makers able to refine and to increase the level of confidence in the forecasting results. The interest in connecting TRIZ to forecasting methodology, nowadays, relates to the massive application of TRIZ methods and techniques for engineering system development world-wide and in growing application of TRIZ’s concepts and paradigms for improvements of non-engineering systems (including the business and economic applications.

  7. Large sample NAA facility and methodology development

    International Nuclear Information System (INIS)

    Roth, C.; Gugiu, D.; Barbos, D.; Datcu, A.; Aioanei, L.; Dobrea, D.; Taroiu, I. E.; Bucsa, A.; Ghinescu, A.

    2013-01-01

    A Large Sample Neutron Activation Analysis (LSNAA) facility has been developed at the TRIGA- Annular Core Pulsed Reactor (ACPR) operated by the Institute for Nuclear Research in Pitesti, Romania. The central irradiation cavity of the ACPR core can accommodate a large irradiation device. The ACPR neutron flux characteristics are well known and spectrum adjustment techniques have been successfully applied to enhance the thermal component of the neutron flux in the central irradiation cavity. An analysis methodology was developed by using the MCNP code in order to estimate counting efficiency and correction factors for the major perturbing phenomena. Test experiments, comparison with classical instrumental neutron activation analysis (INAA) methods and international inter-comparison exercise have been performed to validate the new methodology. (authors)

  8. Action research methodology in clinical pharmacy

    DEFF Research Database (Denmark)

    Nørgaard, Lotte Stig; Sørensen, Ellen Westh

    2016-01-01

    Introduction The focus in clinical pharmacy practice is and has for the last 30-35 years been on changing the role of pharmacy staff into service orientation and patient counselling. One way of doing this is by involving staff in change process and as a researcher to take part in the change process...... by establishing partnerships with staff. On the background of the authors' widespread action research (AR)-based experiences, recommendations and comments for how to conduct an AR-study is described, and one of their AR-based studies illustrate the methodology and the research methods used. Methodology AR...... is defined as an approach to research which is based on a problem-solving relationship between researchers and clients, which aims at both solving a problem and at collaboratively generating new knowledge. Research questions relevant in AR-studies are: what was the working process in this change oriented...

  9. The fairness of the PPS reimbursement methodology.

    Science.gov (United States)

    Gianfrancesco, F D

    1990-01-01

    In FY 1984 the Medicare program implemented a new method of reimbursing hospitals for inpatient services, the Prospective Payment System (PPS). Under this system, hospitals are paid a predetermined amount per Medicare discharge, which varies according to certain patient and hospital characteristics. This article investigates the presence of systematic biases and other potential imperfections in the PPS reimbursement methodology as revealed by its effects on Medicare operating ratios. The study covers the first three years of the PPS (approximately 1984-1986) and is based on hospital data from the Medicare cost reports and other related sources. Regression techniques were applied to these data to determine how Medicare operating ratios were affected by specific aspects of the reimbursement methodology. Several possible imbalances were detected. The potential undercompensation relating to these can be harmful to certain classes of hospitals and to the Medicare populations that they serve. PMID:2109738

  10. Research Methodologies in Supply Chain Management

    DEFF Research Database (Denmark)

    Kotzab, Herbert

    . Within the 36 chapters 70 authors bring together a rich selection of theoretical and practical examples of how research methodologies are applied in supply chain management. The book contains papers on theoretical implications as well as papers on a range of key methods, such as modelling, surveys, case...... studies or action research. It will be of great interest to researchers in the area of supply chain management and logistics, but also to neighbouring fields, such as network management or global operations.......While supply chain management has risen to great prominence in recent year, there are hardly related developments in research methodologies. Yet, as supply chains cover more than one company, one central issue is how to collect and analyse data along the whole or relevant part of the supply chain...

  11. Toward methodological emancipation in applied health research.

    Science.gov (United States)

    Thorne, Sally

    2011-04-01

    In this article, I trace the historical groundings of what have become methodological conventions in the use of qualitative approaches to answer questions arising from the applied health disciplines and advocate an alternative logic more strategically grounded in the epistemological orientations of the professional health disciplines. I argue for an increasing emphasis on the modification of conventional qualitative approaches to the particular knowledge demands of the applied practice domain, challenging the merits of what may have become unwarranted attachment to theorizing. Reorienting our methodological toolkits toward the questions arising within an evidence-dominated policy agenda, I encourage my applied health disciplinary colleagues to make themselves useful to that larger project by illuminating that which quantitative research renders invisible, problematizing the assumptions on which it generates conclusions, and filling in the gaps in knowledge needed to make decisions on behalf of people and populations.

  12. METHODOLOGICAL PROPOSAL FOR CONTAMINATED SOIL RECOVERY

    Directory of Open Access Journals (Sweden)

    José Antonio Fabelo Falcón

    2017-01-01

    Full Text Available The contamination of soils, by different substances and / or products is becoming more extensive throughout the world, its determination, minimization and treatment to reach the recovery of them is a necessity, even though it is not granted the level of importance required by the countries concerned. The objective of this work is to propose a methodology for the recovery of soils with a high degree of efficiency and effectiveness in the selection of procedures, regardless of the types of pollutants and land use once recovered. The methodological proposal involves the stages of diagnosis, characterization, selection of the technology and its technical and economic validation at the laboratory and pilot plant level. Subsequently, the technology of the treatment is designed, along with the elaboration of an objective study of each particular case and an essential economic and technical feasibility analysis for the different scales of the development of the technological process.

  13. Gamma ray auto absorption correction evaluation methodology

    International Nuclear Information System (INIS)

    Gugiu, Daniela; Roth, Csaba; Ghinescu, Alecse

    2010-01-01

    Neutron activation analysis (NAA) is a well established nuclear technique, suited to investigate the microstructural or elemental composition and can be applied to studies of a large variety of samples. The work with large samples involves, beside the development of large irradiation devices with well know neutron field characteristics, the knowledge of perturbing phenomena and adequate evaluation of correction factors like: neutron self shielding, extended source correction, gamma ray auto absorption. The objective of the works presented in this paper is to validate an appropriate methodology for gamma ray auto absorption correction evaluation for large inhomogeneous samples. For this purpose a benchmark experiment has been defined - a simple gamma ray transmission experiment, easy to be reproduced. The gamma ray attenuation in pottery samples has been measured and computed using MCNP5 code. The results show a good agreement between the computed and measured values, proving that the proposed methodology is able to evaluate the correction factors. (authors)

  14. Methodology for combining dynamic responses. Technical report

    International Nuclear Information System (INIS)

    Mattu, R.K.

    1980-05-01

    Procedures in accordance with Appendix A of 10 CFR 50, GDC 2, call for an appropriate combination of the effects of the accident loads and loads caused by natural phenomena (such as earthquakes) to be reflected in the design bases of safety equipment. This requirement of interaction of loads has been implemented in various ways both within the NRC and the Nuclear Industry. An NRR Working Group constituted to examine load combination methodologies developed recommendations which were published in September 1978 as NUREG-0484, (PB-287 432). Revision 1 of NUREG-0484 extends the conclusions of the original NUREG-0484 on the use of SRSS methodology for the combination of SSE and LOCA responses beyond RCPB to any other ASME Section III, Class 1, 2, or 3 affected system, component or support, and provides criteria for the combination of dynamic responses other than SSE and LOCA

  15. Bisociation of artistic and academic methodologies

    DEFF Research Database (Denmark)

    Heinrich, Falk

    This paper elaborates on the integration of academic and artistic methodologies within the field of art and technology. The term art and technology refers to a recognized research field and to higher education programmes, such as the BA program Art and Technology at Aalborg University. Art...... with and design of teaching designs aims at the description of a methodology and a heuristic for drafting concrete teaching designs....... and discovery. Koestler proposes the concept of bisociation for academic discoveries and artistic revealings alike by looking at the results of this creation (work of art, scientific discovery). However, my question is, whether the blending of academic and artistic discourses and methodologies––being a second...

  16. Case Study Research Methodology in Nursing Research.

    Science.gov (United States)

    Cope, Diane G

    2015-11-01

    Through data collection methods using a holistic approach that focuses on variables in a natural setting, qualitative research methods seek to understand participants' perceptions and interpretations. Common qualitative research methods include ethnography, phenomenology, grounded theory, and historic research. Another type of methodology that has a similar qualitative approach is case study research, which seeks to understand a phenomenon or case from multiple perspectives within a given real-world context.

  17. Methodological challenges in retailer buying behaviour research

    DEFF Research Database (Denmark)

    Hansen, Tommy Holm; Skytte, Hans

    This paper presents a review of studies on retailer buying behaviour with focus on the methodological issues. It is argued that the researcher of retailer buying behaviour is faced with particular challenges regarding the sample frame, defining th of analysis, potentially small populations and low...... response rates, buying centres and product specific behaviour. At the end, the authors propose a descriptive research design that will try to take account of the mentioned issues....

  18. Creation of a Risk Assessment Methodology

    OpenAIRE

    Lefebvre, Nicolas

    2007-01-01

    This report is a presentation of the work realised during an internship at the consultancy division of Thales Security Systems from September 2005 to June 2006. Thales Security Systems is part of Thales, an international group in defence, aeronautics, etc. The work realised consisted in the creation of a new risk assessment methodology for a commercial offer called HELP, standing for Human, Environmental, Logical and Physical security. As a basis for the work, 5 existing risk assessment metho...

  19. An Evaluation Methodology for Protocol Analysis Systems

    Science.gov (United States)

    2007-03-01

    Main Memory Requirement NS: Needham-Schroeder NSL: Needham-Schroeder-Lowe OCaml : Objective Caml POSIX: Portable Operating System...methodology is needed. A. PROTOCOL ANALYSIS FIELD As with any field, there is a specialized language used within the protocol analysis community. Figure...ProVerif requires that Objective Caml ( OCaml ) be installed on the system, OCaml version 3.09.3 was installed. C. WINDOWS CONFIGURATION OS

  20. Methodology of Implementation of Computer Forensics

    OpenAIRE

    Gelev, Saso; Golubovski, Roman; Hristov, Risto; Nikolov, Elenior

    2013-01-01

    Compared to other sciences, computer forensics (digital forensics) is a relatively young discipline. It was established in 1999 and it has been an irreplaceable tool in sanctioning cybercrime ever since. Good knowledge of computer forensics can be really helpful in uncovering a committed crime. Not adhering to the methodology of computer forensics, however, makes the obtained evidence invalid/irrelevant and as such it cannot be used in legal proceedings. This paper is to explain the methodolo...

  1. Methodological issues of postoperative cognitive dysfunction research

    DEFF Research Database (Denmark)

    Funder, Kamilia S; Steinmetz, Jacob; Rasmussen, Lars S

    2010-01-01

    Postoperative cognitive dysfunction (POCD) is a subtle impairment of memory, concentration, and speed of information processing. It is a frequent complication following surgery and can have a debilitating effect on patients' recovery and future prognosis. Neuropsychological testing is needed...... to reveal postoperative cognitive decline, and questionnaires are not useful for this purpose. There is a profound lack of consensus regarding the research methodology for detection of cognitive deterioration, especially the diagnostic criteria. Issues, such as baseline performance, learning effects...

  2. System-level design methodologies for telecommunication

    CERN Document Server

    Sklavos, Nicolas; Goehringer, Diana; Kitsos, Paris

    2013-01-01

    This book provides a comprehensive overview of modern networks design, from specifications and modeling to implementations and test procedures, including the design and implementation of modern networks on chip, in both wireless and mobile applications.  Topical coverage includes algorithms and methodologies, telecommunications, hardware (including networks on chip), security and privacy, wireless and mobile networks and a variety of modern applications, such as VoLTE and the internet of things.

  3. Proceedings of Arcom Doctoral Workshop Research Methodology

    OpenAIRE

    Scott, Lloyd

    2018-01-01

    Editorial Editorial Welcome to this special doctoral workshop on Research Methodology which forms part of what is now a well-established support mechanism for researchers in the discipline of the Built Environment and more particularly construction management. The ARCOM doctoral series, around now for some seventeen years, has addressed many of the diverse research areas that PhD researchers in the discipline have chosen to focus on in their doctoral journey. This doctoral workshop has as ...

  4. Prescriptive Training Courseware: IS-Design Methodology

    Directory of Open Access Journals (Sweden)

    Elspeth McKay

    2018-03-01

    Full Text Available Information systems (IS research is found in many diverse communities. This paper explores the human-dimension of human-computer interaction (HCI to present IS-design practice in the light of courseware development. Assumptions are made that online courseware provides the perfect solution for maintaining a knowledgeable, well skilled workforce. However, empirical investigations into the effectiveness of information technology (IT-induced training solutions are scarce. Contemporary research concentrates on information communications technology (ICT training tools without considering their effectiveness. This paper offers a prescriptive IS-design methodology for managing the requirements for efficient and effective courseware development. To develop the methodology, we examined the main instructional design (ID factors that affect the design of IT-induced training programs. We also examined the tension between maintaining a well-skilled workforce and effective instructional systems design (ISD practice by probing the current ID models used by courseware developers since 1990. An empirical research project, which utilized this IS-design methodology investigated the effectiveness of using IT to train government employees in introductory ethics; this was a study that operationalized the interactive effect of cognitive preference and instructional format on training performance outcomes. The data was analysed using Rasch item response theory (IRT that models the discrimination of people’s performance relative to each other’s performance and the test-items’ difficulty relative to each test-item on the same logit scale. The findings revealed that IS training solutions developed using this IS-design methodology can be adapted to provide trainees with their preferred instructional mode and facilitate cost effective eTraining outcomes.

  5. Spaces of Global Security: Beyond Methodological Nationalism

    OpenAIRE

    Adamson , Fiona B.

    2016-01-01

    The changing political and social meanings of space under conditions of advanced globalization point to the need to analyze security – or the deployment and management of violence -- as a socio-spatial practice. This article draws attention to the “methodological nationalist” bias that has traditionally characterized mainstream security studies, and discusses its effect on how security issues are studied and conceptualized. Building on insights from political geography and sociology, the arti...

  6. Cross-section methodology in SIMMER

    International Nuclear Information System (INIS)

    Soran, P.D.

    1975-11-01

    The cross-section methodology incorporated in the SIMMER code is described. Data base for all cross sections is the ENDF/B system with various progressing computer codes to group collapse and modify the group constants which are used in SIMMER. Either infinitely dilute cross sections or the Bondarenko formalism can be used in SIMMER. Presently only a microscopic treatment is considered, but preliminary macroscopic algorithms have been investigated

  7. Ultra wideband antennas design, methodologies, and performance

    CERN Document Server

    Galvan-Tejada, Giselle M; Jardón Aguilar, Hildeberto

    2015-01-01

    Ultra Wideband Antennas: Design, Methodologies, and Performance presents the current state of the art of ultra wideband (UWB) antennas, from theory specific for these radiators to guidelines for the design of omnidirectional and directional UWB antennas. Offering a comprehensive overview of the latest UWB antenna research and development, this book:Discusses the developed theory for UWB antennas in frequency and time domainsDelivers a brief exposition of numerical methods for electromagnetics oriented to antennasDescribes solid-planar equivalen

  8. Gas Turbine Blade Damper Optimization Methodology

    OpenAIRE

    R. K. Giridhar; P. V. Ramaiah; G. Krishnaiah; S. G. Barad

    2012-01-01

    The friction damping concept is widely used to reduce resonance stresses in gas turbines. A friction damper has been designed for high pressure turbine stage of a turbojet engine. The objective of this work is to find out effectiveness of the damper while minimizing resonant stresses for sixth and ninth engine order excitation of first flexure mode. This paper presents a methodology that combines three essential phases of friction damping optimization in turbo-machinery. The first phase is to...

  9. Implied Volatility Surface: Construction Methodologies and Characteristics

    OpenAIRE

    Cristian Homescu

    2011-01-01

    The implied volatility surface (IVS) is a fundamental building block in computational finance. We provide a survey of methodologies for constructing such surfaces. We also discuss various topics which can influence the successful construction of IVS in practice: arbitrage-free conditions in both strike and time, how to perform extrapolation outside the core region, choice of calibrating functional and selection of numerical optimization algorithms, volatility surface dynamics and asymptotics.

  10. Cross-section methodology in SIMMER

    International Nuclear Information System (INIS)

    Soran, P.D.

    1976-05-01

    The cross-section methodology incorporated in the SIMMER code is described. Data base for all cross sections is the ENDF/B system with various progressing computer codes to group collapse and modify the group constants which are used in SIMMER. Either infinitely dilute cross sections or the Bondarenko formalism can be used in SIMMER. Presently only a microscopic treatment is considered, but preliminary macroscopic algorithms have been investigated

  11. Challenges in dental statistics: survey methodology topics

    OpenAIRE

    Pizzo, Giuseppe; Milani, Silvano; Spada, Elena; Ottolenghi, Livia

    2013-01-01

    This paper gathers some contributions concerning survey methodology in dental research, as discussed during the first Workshop of the SISMEC STATDENT working group on statistical methods and applications in dentistry, held in Ancona on the 28th September 2011.The first contribution deals with the European Global Oral Health Indicators Development (EGOHID) Project which proposed a comprehensive and standardized system of epidemiological tools (questionnaires and clinical forms) for national da...

  12. Novel methodology for pharmaceutical expenditure forecast

    OpenAIRE

    Vataire, Anne-Lise; Cetinsoy, Laurent; Aball?a, Samuel; R?muzat, C?cile; Urbinati, Duccio; Kornfeld, ?sa; Mzoughi, Olfa; Toumi, Mondher

    2014-01-01

    Background and objective: The value appreciation of new drugs across countries today features a disruption that is making the historical data that are used for forecasting pharmaceutical expenditure poorly reliable. Forecasting methods rarely addressed uncertainty. The objective of this project was to propose a methodology to perform pharmaceutical expenditure forecasting that integrates expected policy changes and uncertainty (developed for the European Commission as the ‘EU Pharmaceutical e...

  13. Methodological approach to organizational performance improvement process

    OpenAIRE

    Buble, Marin; Dulčić, Želimir; Pavić, Ivan

    2017-01-01

    Organizational performance improvement is one of the fundamental enterprise tasks. This especially applies to the case when the term “performance improvement” implies efficiency improvement measured by indicators, such as ROI, ROE, ROA, or ROVA/ROI. Such tasks are very complex, requiring implementation by means of project management. In this paper, the authors propose a methodological approach to improving the organizational performance of a large enterprise.

  14. Methodology for Designing Fault-Protection Software

    Science.gov (United States)

    Barltrop, Kevin; Levison, Jeffrey; Kan, Edwin

    2006-01-01

    A document describes a methodology for designing fault-protection (FP) software for autonomous spacecraft. The methodology embodies and extends established engineering practices in the technical discipline of Fault Detection, Diagnosis, Mitigation, and Recovery; and has been successfully implemented in the Deep Impact Spacecraft, a NASA Discovery mission. Based on established concepts of Fault Monitors and Responses, this FP methodology extends the notion of Opinion, Symptom, Alarm (aka Fault), and Response with numerous new notions, sub-notions, software constructs, and logic and timing gates. For example, Monitor generates a RawOpinion, which graduates into Opinion, categorized into no-opinion, acceptable, or unacceptable opinion. RaiseSymptom, ForceSymptom, and ClearSymptom govern the establishment and then mapping to an Alarm (aka Fault). Local Response is distinguished from FP System Response. A 1-to-n and n-to- 1 mapping is established among Monitors, Symptoms, and Responses. Responses are categorized by device versus by function. Responses operate in tiers, where the early tiers attempt to resolve the Fault in a localized step-by-step fashion, relegating more system-level response to later tier(s). Recovery actions are gated by epoch recovery timing, enabling strategy, urgency, MaxRetry gate, hardware availability, hazardous versus ordinary fault, and many other priority gates. This methodology is systematic, logical, and uses multiple linked tables, parameter files, and recovery command sequences. The credibility of the FP design is proven via a fault-tree analysis "top-down" approach, and a functional fault-mode-effects-and-analysis via "bottoms-up" approach. Via this process, the mitigation and recovery strategy(s) per Fault Containment Region scope (width versus depth) the FP architecture.

  15. Applicability of the Directed Graph Methodology

    Energy Technology Data Exchange (ETDEWEB)

    Huszti, Jozsef [Institute of Isotope of the Hungarian Academy of Sciences, Budapest (Hungary); Nemeth, Andras [ESRI Hungary, Budapest (Hungary); Vincze, Arpad [Hungarian Atomic Energy Authority, Budapest (Hungary)

    2012-06-15

    Possible methods to construct, visualize and analyse the 'map' of the State's nuclear infrastructure based on different directed graph approaches are proposed. The transportation and the flow network models are described in detail. The use of the possible evaluation methodologies and the use of available software tools to construct and maintain the nuclear 'map' using pre-defined standard building blocks (nuclear facilities) are introduced and discussed.

  16. On-Line Maintenance Methodology Development

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Hyo Won; Kim, Jae Ho; Jae, Moo Sung [Hanyang University, Seoul (Korea, Republic of)

    2012-05-15

    Most of domestic maintenance activities for nuclear power plants are performed while overhaul. Therefore, On-Line Maintenance (OLM) is one of the proper risks informed application techniques for diffusing maintenance burden during overhaul with safety of the plant is secured. The NUMARC 93-01 (Rev.3) presents the OLM state of the art and it provides methodology. This study adopts NUMARC 93-01 (Rev.3) and present OLM. The reference component is Emergency Diesel Generator (EDG) of Ulchin 3, 4

  17. Response Surface Methodology: 1966-1986

    Science.gov (United States)

    1986-09-01

    male broilers to examine quantitatively the protein levels in starter and Gnisher rations and the time of ration change to optimize body weight, carcass...1983). ’Akn Investigation of Protein Levels for Broiler Starter and Finisher Rations and the Time of Ration Change by Response Surface Methodology...when Responses Within a Litter are Correlated,’ Biometrics, 37, 153-156. Shek, E., Ghani, M. and Jones, R.E. (1980). "Simplex Search in Optimization

  18. Private events: from methodological behaviorism to interbehaviorism

    OpenAIRE

    Bueno, Roberto; Universidad de San Martín de Porres / Universidad Nacional Federico Villarreal

    2010-01-01

    As supposed events being accessible to a unique observer, private events posit an interesting challenge to a behavioristic psychology. Three historical variants of behaviorism dealt with the problem of private events: methodological behaviorism, radical behaviorism and interbehaviorism. The basic argument of the two last views, and that distinguishes them from the former, is that private events are comprised into the scope of an objective science of behavior. The analysis of these accounts pe...

  19. Methodological foundations of target market enterprise orientation

    OpenAIRE

    N.V. Karpenko

    2012-01-01

    In the article the author determines the importance of target market orientation maintenance which content is based on marketing principles and envisages the interrelationship of market segmentation processes and positioning. Proposed methodological principles of segmentation implementation are the result of the authors own research, and the process of positioning is examined through the five-level system that contains three stages and two variants of organizational behavior.

  20. A Design Methodology for Medical Processes

    Science.gov (United States)

    Bonacina, Stefano; Pozzi, Giuseppe; Pinciroli, Francesco; Marceglia, Sara

    2016-01-01

    Summary Background Healthcare processes, especially those belonging to the clinical domain, are acknowledged as complex and characterized by the dynamic nature of the diagnosis, the variability of the decisions made by experts driven by their experiences, the local constraints, the patient’s needs, the uncertainty of the patient’s response, and the indeterminacy of patient’s compliance to treatment. Also, the multiple actors involved in patient’s care need clear and transparent communication to ensure care coordination. Objectives In this paper, we propose a methodology to model healthcare processes in order to break out complexity and provide transparency. Methods The model is grounded on a set of requirements that make the healthcare domain unique with respect to other knowledge domains. The modeling methodology is based on three main phases: the study of the environmental context, the conceptual modeling, and the logical modeling. Results The proposed methodology was validated by applying it to the case study of the rehabilitation process of stroke patients in the specific setting of a specialized rehabilitation center. The resulting model was used to define the specifications of a software artifact for the digital administration and collection of assessment tests that was also implemented. Conclusions Despite being only an example, our case study showed the ability of process modeling to answer the actual needs in healthcare practices. Independently from the medical domain in which the modeling effort is done, the proposed methodology is useful to create high-quality models, and to detect and take into account relevant and tricky situations that can occur during process execution. PMID:27081415

  1. Methodological approach to strategic performance optimization

    OpenAIRE

    Hell, Marko; Vidačić, Stjepan; Garača, Željko

    2009-01-01

    This paper presents a matrix approach to the measuring and optimization of organizational strategic performance. The proposed model is based on the matrix presentation of strategic performance, which follows the theoretical notions of the balanced scorecard (BSC) and strategy map methodologies, initially developed by Kaplan and Norton. Development of a quantitative record of strategic objectives provides an arena for the application of linear programming (LP), which is a mathematical tech...

  2. Safety on Judo Children: Methodology and Results

    OpenAIRE

    Sacripanti, Attilio; De Blasis, Tania

    2017-01-01

    Many doctors although they have not firsthand experience of judo, describe it as a sport unsuitable for children. Theoretically speaking falls derived by Judo throwing techniques,could be potentially dangerous,especially for kids,if poorly managed.A lot of researches were focalized on trauma or injuries taking place in judo, both during training and competition The goal of this Research is to define and apply a scientific methodology to evaluate the hazard in falls by judo throws for children...

  3. Performance improvement using methodology: case study.

    Science.gov (United States)

    Harmelink, Stacy

    2008-01-01

    The department of radiology at St. Luke's Regional Medical Center in Sioux City, IA implemented meaningful workflow changes for reducing patient wait times and, at the same time, improved customer and employee satisfaction scores. Lean methodology and the 7 Deadly Wastes, along with small group interaction, was used to evaluate and change the process of a patient waiting for an exam in the radiology department. The most important key to the success of a performance improvement project is the involvement of staff.

  4. Methodological approach to organizational performance improvement process

    Directory of Open Access Journals (Sweden)

    Marin Buble

    2001-01-01

    Full Text Available Organizational performance improvement is one of the fundamental enterprise tasks. This especially applies to the case when the term “performance improvement” implies efficiency improvement measured by indicators, such as ROI, ROE, ROA, or ROVA/ROI. Such tasks are very complex, requiring implementation by means of project management. In this paper, the authors propose a methodological approach to improving the organizational performance of a large enterprise.

  5. Synthesis of methodology development and case studies

    OpenAIRE

    Roetter, R.P.; Keulen, van, H.; Laar, van, H.H.

    2000-01-01

    The .Systems Research Network for Ecoregional Land Use Planning in Support of Natural Resource Management in Tropical Asia (SysNet). was financed under the Ecoregional Fund, administered by the International Service for National Agricultural Research (ISNAR). The objective of the project was to develop and evaluate methodologies and tools for land use analysis, and apply them at the subnational scale to support agricultural and environmental policy formulation. In the framework of this projec...

  6. Integrated Management System - Scope, Possibilities And Methodology

    Science.gov (United States)

    Čekanová, Katarína

    2015-06-01

    Organizations are becoming more aware of the importance of integrated management systems (IMS). Interest in this subject indicates that IMS are seen as "management systems of the future". Based on this, the aim of this articles characterizes the possibility of building IMS through the identification of common elements and specific requirements in accordance with the ISO 9001, ISO 14001 and OHSAS 18001 professional references. Part of the article is the methodology of building IMS in the organization.

  7. CAGE IIIA Distributed Simulation Design Methodology

    Science.gov (United States)

    2014-05-01

    2 VHF Very High Frequency VLC Video LAN Codec – an Open-source cross-platform multimedia player and framework VM Virtual Machine VOIP Voice Over...Implementing Defence Experimentation (GUIDEx). The key challenges for this methodology are with understanding how to: • design it o define the...operation and to be available in the other nation’s simulations. The challenge for the CAGE campaign of experiments is to continue to build upon this

  8. Environmental sample banking-research and methodology

    International Nuclear Information System (INIS)

    Becker, D.A.

    1976-01-01

    The National Bureau of Standards (NBS), in cooperation with the Environment Protection Agency and the National Science Foundation, is engaged in a research program establishing methodology for environmental sample banking. This program is aimed toward evaluating the feasibility of a National Environment Specimen Bank (NESB). The capability for retrospective chemical analyses to evaluate changes in our environment would provide useful information. Much of this information could not be obtained using data from previously analyzed samples. However, to assure validity for these stored samples, they must be sampled, processed and stored under rigorously evaluated, controlled and documented conditions. The program currently under way in the NBS Analytical Chemistry Division has 3 main components. The first is an extension survey of available literature concerning problems of contamination, losses and storage. The components of interest include trace elements, pesticides, other trace organics (PCBs, plasticizers, etc.), radionuclides and microbiological species. The second component is an experimental evaluation of contamination and losses during sampling and sample handling. Of particular interest here is research into container cleaning methodology for trace elements, with respect to adsorption, desorption, leaching and partial dissolution by various sample matrices. The third component of this program is an evaluation of existing methodology for long-term sample storage

  9. Methodological quality of guidelines in gastroenterology.

    Science.gov (United States)

    Malheiro, Rui; de Monteiro-Soares, Matilde; Hassan, Cesare; Dinis-Ribeiro, Mário

    2014-06-01

    Clinical guidelines are a common feature in modern endoscopy practice and they are being produced faster than ever. However, their methodological quality is rarely assessed. This study evaluated the methodological quality of current clinical guidelines in the field of gastroenterology, with an emphasis on endoscopy. Practice guidelines published by the American College of Gastroenterology (ACG), American Gastroenterological Association (AGA), American Society for Gastrointestinal Endoscopy (ASGE), European Society of Gastrointestinal Endoscopy (ESGE), British Society of Gastroenterology (BSG), National Institute for Health and Care Excellence (NICE), and the Scottish Intercollegiate Guidelines Network (SIGN) were searched between September and October 2012 and evaluated using the AGREE II (Appraisal of Guidelines for Research and Evaluation) instrument (23 items, scores 1 - 7 for each item; higher scores mean better quality). A total of 100 guidelines were assessed. The mean number of items scoring 6 or 7 per guideline was 9.2 (out of 23 items). Overall, 99 % of guidelines failed to include the target population in the development process, and 96 % did not report facilitators and barriers to guideline application. In addition, 86 % did not include advice or tools, and 94 % did not present monitoring or auditing criteria. The global methodological quality of clinical guidelines in the field of gastroenterology is poor, particularly regarding involvement of the target population in the development of guidelines and in the provision of clear suggestions to practitioners. © Georg Thieme Verlag KG Stuttgart · New York.

  10. Vending machine assessment methodology. A systematic review.

    Science.gov (United States)

    Matthews, Melissa A; Horacek, Tanya M

    2015-07-01

    The nutritional quality of food and beverage products sold in vending machines has been implicated as a contributing factor to the development of an obesogenic food environment. How comprehensive, reliable, and valid are the current assessment tools for vending machines to support or refute these claims? A systematic review was conducted to summarize, compare, and evaluate the current methodologies and available tools for vending machine assessment. A total of 24 relevant research studies published between 1981 and 2013 met inclusion criteria for this review. The methodological variables reviewed in this study include assessment tool type, study location, machine accessibility, product availability, healthfulness criteria, portion size, price, product promotion, and quality of scientific practice. There were wide variations in the depth of the assessment methodologies and product healthfulness criteria utilized among the reviewed studies. Of the reviewed studies, 39% evaluated machine accessibility, 91% evaluated product availability, 96% established healthfulness criteria, 70% evaluated portion size, 48% evaluated price, 52% evaluated product promotion, and 22% evaluated the quality of scientific practice. Of all reviewed articles, 87% reached conclusions that provided insight into the healthfulness of vended products and/or vending environment. Product healthfulness criteria and complexity for snack and beverage products was also found to be variable between the reviewed studies. These findings make it difficult to compare results between studies. A universal, valid, and reliable vending machine assessment tool that is comprehensive yet user-friendly is recommended. Copyright © 2015 Elsevier Ltd. All rights reserved.

  11. A dose to curie conversion methodology

    International Nuclear Information System (INIS)

    Stowe, P.A.

    1987-01-01

    Development of the computer code RadCAT (Radioactive waste Classification And Tracking) has led to the development of a simple dose rate to curie content conversion methodology for containers with internally distributed radioactive material. It was determined early on that, if possible, the computerized dose rate to curie evaluation model employed in RadCAT should yield the same results as the hand method utilized and specified in plant procedures. A review of current industry practices indicated two distinct types of computational methodologies are presently in use. The most common methods are computer based calculations utilizing complex mathematical models specifically established for various containers geometries. This type of evaluation is tedious, however, and does not lend itself to repetition by hand. The second method of evaluation, therefore, is simplified expressions that sacrifice accuracy for ease of computation, and generally over estimate container curie content. To meet the aforementioned criterion current computer based models were deemed unacceptably complex and hand computational methods to be too inaccurate for serious consideration. The contact dose rate/curie content analysis methodology presented herein provides an equation that is easy to use in hand calculations yet provides accuracy equivalent to other computer based computations

  12. Least-cost Paths - Some Methodological Issues

    Directory of Open Access Journals (Sweden)

    Irmela Herzog

    2014-06-01

    Full Text Available This article deals with methodological issues connected with least-cost path (LCP calculations in archaeology. The number of LCP studies in archaeology has increased rapidly during the last couple of years, but not all of the approaches applied are based on an appropriate model and implementation. Many archaeologists rely on standard GIS software with default settings for calculating LCPs and are not aware of possible alternatives and the pitfalls that are described in this article. After briefly introducing the aims and applications of LCP methods in archaeology, LCP algorithms are discussed. The outcome of the LCP calculations depends not only on the algorithm but also on the cost model, which often includes several cost components. The discussion of the cost components has a focus on slope, because nearly all archaeological LCP studies take this cost component into account and because several methodological issues are connected with slope-based cost models. Other possible cost components are: the load of the walker, vegetation cover, wetlands or other soil properties, travelling and transport on water, water as barrier and as attractor, aspect, altitude, and social or cultural cost components. Eventually, advantages and disadvantages of different ways of combining cost components are presented. Based on the methodological issues I conclude that both validation checks and variations of the model are necessary to analyse the reliability of archaeological LCP results.

  13. Methodological exploratory study applied to occupational epidemiology

    Energy Technology Data Exchange (ETDEWEB)

    Carneiro, Janete C.G. Gaburo; Vasques, MOnica Heloisa B.; Fontinele, Ricardo S.; Sordi, Gian Maria A. [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)]. E-mail: janetegc@ipen.br

    2007-07-01

    The utilization of epidemiologic methods and techniques has been object of practical experimentation and theoretical-methodological reflection in health planning and programming process. Occupational Epidemiology is the study of the causes and prevention of diseases and injuries from exposition and risks in the work environment. In this context, there is no intention to deplete such a complex theme but to deal with basic concepts of Occupational Epidemiology, presenting the main characteristics of the analysis methods used in epidemiology, as investigate the possible determinants of exposition (chemical, physical and biological agents). For this study, the social-demographic profile of the IPEN-CNEN/SP work force was used. The knowledge of this reference population composition is based on sex, age, educational level, marital status and different occupations, aiming to know the relation between the health aggravating factors and these variables. The methodology used refers to a non-experimental research based on a theoretical methodological practice. The work performed has an exploratory character, aiming a later survey of indicators in the health area in order to analyze possible correlations related to epidemiologic issues. (author)

  14. Methodological exploratory study applied to occupational epidemiology

    International Nuclear Information System (INIS)

    Carneiro, Janete C.G. Gaburo; Vasques, MOnica Heloisa B.; Fontinele, Ricardo S.; Sordi, Gian Maria A.

    2007-01-01

    The utilization of epidemiologic methods and techniques has been object of practical experimentation and theoretical-methodological reflection in health planning and programming process. Occupational Epidemiology is the study of the causes and prevention of diseases and injuries from exposition and risks in the work environment. In this context, there is no intention to deplete such a complex theme but to deal with basic concepts of Occupational Epidemiology, presenting the main characteristics of the analysis methods used in epidemiology, as investigate the possible determinants of exposition (chemical, physical and biological agents). For this study, the social-demographic profile of the IPEN-CNEN/SP work force was used. The knowledge of this reference population composition is based on sex, age, educational level, marital status and different occupations, aiming to know the relation between the health aggravating factors and these variables. The methodology used refers to a non-experimental research based on a theoretical methodological practice. The work performed has an exploratory character, aiming a later survey of indicators in the health area in order to analyze possible correlations related to epidemiologic issues. (author)

  15. The Methodological Imperatives of Feminist Ethnography

    Directory of Open Access Journals (Sweden)

    Richelle D. Schrock

    2013-12-01

    Full Text Available Feminist ethnography does not have a single, coherent definition and is caught between struggles over the definition and goals of feminism and the multiple practices known collectively as ethnography. Towards the end of the 1980s, debates emerged that problematized feminist ethnography as a productive methodology and these debates still haunt feminist ethnographers today. In this article, I provide a concise historiography of feminist ethnography that summarizes both its promises and its vulnerabilities. I address the three major challenges I argue feminist ethnographers currently face, which include responding productively to feminist critiques of representing "others," accounting for feminisms' commitment to social change while grappling with poststructuralist critiques of knowledge production, and confronting the historical and ongoing lack of recognition for significant contributions by feminist ethnographers. Despite these challenges, I argue that feminist ethnography is a productive methodology and I conclude by delineating its methodological imperatives. These imperatives include producing knowledge about women's lives in specific cultural contexts, recognizing the potential detriments and benefits of representation, exploring women's experiences of oppression along with the agency they exercise in their own lives, and feeling an ethical responsibility towards the communities in which the researchers work. I argue that this set of imperatives enables feminist ethnographers to successfully navigate the challenges they face.

  16. Does Metformin Reduce Cancer Risks? Methodologic Considerations.

    Science.gov (United States)

    Golozar, Asieh; Liu, Shuiqing; Lin, Joeseph A; Peairs, Kimberly; Yeh, Hsin-Chieh

    2016-01-01

    The substantial burden of cancer and diabetes and the association between the two conditions has been a motivation for researchers to look for targeted strategies that can simultaneously affect both diseases and reduce their overlapping burden. In the absence of randomized clinical trials, researchers have taken advantage of the availability and richness of administrative databases and electronic medical records to investigate the effects of drugs on cancer risk among diabetic individuals. The majority of these studies suggest that metformin could potentially reduce cancer risk. However, the validity of this purported reduction in cancer risk is limited by several methodological flaws either in the study design or in the analysis. Whether metformin use decreases cancer risk relies heavily on the availability of valid data sources with complete information on confounders, accurate assessment of drug use, appropriate study design, and robust analytical techniques. The majority of the observational studies assessing the association between metformin and cancer risk suffer from methodological shortcomings and efforts to address these issues have been incomplete. Future investigations on the association between metformin and cancer risk should clearly address the methodological issues due to confounding by indication, prevalent user bias, and time-related biases. Although the proposed strategies do not guarantee a bias-free estimate for the association between metformin and cancer, they will reduce synthesis of and reporting of erroneous results.

  17. Methodology for plastic fracture - a progress report

    International Nuclear Information System (INIS)

    Wilkinson, J.P.D.; Smith, R.E.E.

    1977-01-01

    This paper describes the progress of a study to develop a methodology for plastic fracture. Such a fracture mechanics methodology, having application in the plastic region, is required to assess the margin of safety inherent in nuclear reactor pressure vessels. The initiation and growth of flaws in pressure vessels under overload conditions is distinguished by a number of unique features, such as large scale yielding, three-dimensional structural and flaw configurations, and failure instabilities that may be controlled by either toughness or plastic flow. In order to develop a broadly applicable methodology of plastic fracture, these features require the following analytical and experimental studies: development of criteria for crack initiation and growth under large scale yielding; the use of the finite element method to describe elastic-plastic behaviour of both the structure and the crack tip region; and extensive experimental studies on laboratory scale and large scale specimens, which attempt to reproduce the pertinent plastic flow and crack growth phenomena. This discussion centers on progress to date on the selection, through analysis and laboratory experiments, of viable criteria for crack initiation and growth during plastic fracture. (Auth.)

  18. Common methodological flaws in economic evaluations.

    Science.gov (United States)

    Drummond, Michael; Sculpher, Mark

    2005-07-01

    Economic evaluations are increasingly being used by those bodies such as government agencies and managed care groups that make decisions about the reimbursement of health technologies. However, several reviews of economic evaluations point to numerous deficiencies in the methodology of studies or the failure to follow published methodological guidelines. This article, written for healthcare decision-makers and other users of economic evaluations, outlines the common methodological flaws in studies, focussing on those issues that are likely to be most important when deciding on the reimbursement, or guidance for use, of health technologies. The main flaws discussed are: (i) omission of important costs or benefits; (ii) inappropriate selection of alternatives for comparison; (iii) problems in making indirect comparisons; (iv) inadequate representation of the effectiveness data; (v) inappropriate extrapolation beyond the period observed in clinical studies; (vi) excessive use of assumptions rather than data; (vii) inadequate characterization of uncertainty; (viii) problems in aggregation of results; (ix) reporting of average cost-effectiveness ratios; (x) lack of consideration of generalizability issues; and (xi) selective reporting of findings. In each case examples are given from the literature and guidance is offered on how to detect flaws in economic evaluations.

  19. Assessment of methodologies for radioactive waste management

    International Nuclear Information System (INIS)

    Hoos, I.R.

    1978-01-01

    No quantitative methodology is adequate to encompass and assess all the risks, no risk/benefit calculation is fine-tuned enough to supply decision-makers with the full range and all of the dimensions. Quality assurance cannot be conceived in terms of systems design alone, but must be maintained vigilantly and with integrity throughout the process. The responsibility of the NRC is fairly well established with respect to overall reactor safety. With respect to the management of radioactive wastes, its mission is not yet so clearly delineated. Herein lies a challenge and an opportunity. Where the known quantitative methodologies are restrictive and likely to have negative feedback effect on authority and public support, the broader lens and the bolder thrust are called for. The cozy cocoon of figures ultimately protects no one. The Commission, having acknowledged that the management of radioactive wastes is not merely a technological matter can now take the socially responsible position of exploring as fully and confronting as candidly as possible the total range of dimensions involved. Paradoxically, it is Charles J. Hitch, intellectual progenitor of the methodology, who observes that we may be missing the meaning of his message by relying too heavily on quantitative analysis and thus defining our task too narrowly. We live in a closed system, in which science and technology, politics and economics, and, above all, social and human elements interact, sometimes to create the problems, sometimes to articulate the questions, and sometimes to find viable solutions

  20. Proposal of methodology of tsunami accident sequence analysis induced by earthquake using DQFM methodology

    International Nuclear Information System (INIS)

    Muta, Hitoshi; Muramatsu, Ken

    2017-01-01

    Since the Fukushima-Daiichi nuclear power station accident, the Japanese regulatory body has improved and upgraded the regulation of nuclear power plants, and continuous effort is required to enhance risk management in the mid- to long term. Earthquakes and tsunamis are considered as the most important risks, and the establishment of probabilistic risk assessment (PRA) methodologies for these events is a major issue of current PRA. The Nuclear Regulation Authority (NRA) addressed the PRA methodology for tsunamis induced by earthquakes, which is one of the methodologies that should be enhanced step by step for the improvement and maturity of PRA techniques. The AESJ standard for the procedure of seismic PRA for nuclear power plants in 2015 provides the basic concept of the methodology; however, details of the application to the actual plant PRA model have not been sufficiently provided. This study proposes a detailed PRA methodology for tsunamis induced by earthquakes using the DQFM methodology, which contributes to improving the safety of nuclear power plants. Furthermore, this study also states the issues which need more research. (author)

  1. Methodology for analyzing risk at nuclear facilities

    International Nuclear Information System (INIS)

    Yoo, Hosik; Lee, Nayoung; Ham, Taekyu; Seo, Janghoon

    2015-01-01

    Highlights: • A new methodology for evaluating the risk at nuclear facilities was developed. • Five measures reflecting all factors that should be concerned to assess risk were developed. • The attributes on NMAC and nuclear security culture are included as attributes for analyzing. • The newly developed methodology can be used to evaluate risk of both existing facility and future nuclear system. - Abstract: A methodology for evaluating risks at nuclear facilities is developed in this work. A series of measures is drawn from the analysis of factors that determine risks. Five measures are created to evaluate risks at nuclear facilities. These include the legal and institutional framework, material control, physical protection system effectiveness, human resources, and consequences. Evaluation attributes are developed for each measure and specific values are given in order to calculate the risk value quantitatively. Questionnaires are drawn up on whether or not a state has properly established a legal and regulatory framework (based on international standards). These questionnaires can be a useful measure for comparing the status of the physical protection regime between two countries. Analyzing an insider threat is not an easy task and no methodology has been developed for this purpose. In this study, attributes that could quantitatively evaluate an insider threat, in the case of an unauthorized removal of nuclear materials, are developed by adopting the Nuclear Material Accounting & Control (NMAC) system. The effectiveness of a physical protection system, P(E), could be analyzed by calculating the probability of interruption, P(I), and the probability of neutralization, P(N). In this study, the Tool for Evaluating Security System (TESS) code developed by KINAC is used to calculate P(I) and P(N). Consequence is an important measure used to analyze risks at nuclear facilities. This measure comprises radiological, economic, and social damage. Social and

  2. Introducing an ILS methodology into research reactors

    International Nuclear Information System (INIS)

    Lorenzo, N. de; Borsani, R.C.

    2003-01-01

    Integrated Logistics Support (ILS) is the managerial organisation that co-ordinates the activities of many disciplines to develop the supporting resources (training, staffing, designing aids, equipment removal routes, etc) required by technologically complex systems. The application of an ILS methodology in defence projects is described in several places, but it is infrequently illustrated for other areas; therefore the present paper deals with applying this approach to research reactors under design or already in operation. Although better results are obtained when applied since the very beginning of a project, it can be applied successfully in facilities already in operation to improve their capability in a cost-effective way. In applying this methodology, the key objectives shall be previously identified in order to tailor the whole approach. Generally in high power multipurpose reactors, obtaining maximum profit at the lowest possible cost without reducing the safety levels are key issues, while in others the goal is to minimise drawbacks like spurious shutdowns, low quality experimental results or even to reduce staff dose to ALARA values. These items need to be quantified for establishing a system status base line in order to trace the process evolution. Thereafter, specific logistics analyses should be performed in the different areas composing the system. RAMS (Reliability, Availability, Maintainability and Supportability), Manning, Training Needs, Supplying Needs are some examples of these special logistic assessments. The following paragraphs summarise the different areas, encompassed by this ILS methodology. Plant design is influenced focussing the designers? attention on the objectives already identified. Careful design reviews are performed only in an early design stage, being useless a later application. In this paper is presented a methodology including appropriate tools for ensuring the designers abide to ILS issues and key objectives through the

  3. Development of assessment methodology for plant configuration control

    Energy Technology Data Exchange (ETDEWEB)

    Chung, Chang Hyun; You, Young Woo; Kim, Yoon Ik; Yang, Hui Chang; Huh, Byeong Gill; Lee, Dong Won; Ahn, Gwan Won [Seoul National Univ., Seoul (Korea, Republic of)

    2001-03-15

    The purpose of this study IS the development of effective and overall assessment methodology which reflects the characteristics of plants for the surveillance, maintenance, repair and operation of nuclear power plants. In this study, recent researches are surveyed and concept definition, procedures, current PSA methodologies, implementation of various models are evaluated. Through this survey, systematic assessment methodology is suggested. Configuration control assessment methodology suggested in this study for the purpose of the development of configuration control methodology reflecting the characteristics of Korean NPPs, can be utilized as the supplement of current PSA methodologies.

  4. Waste Package Component Design Methodology Report

    International Nuclear Information System (INIS)

    D.C. Mecham

    2004-01-01

    This Executive Summary provides an overview of the methodology being used by the Yucca Mountain Project (YMP) to design waste packages and ancillary components. This summary information is intended for readers with general interest, but also provides technical readers a general framework surrounding a variety of technical details provided in the main body of the report. The purpose of this report is to document and ensure appropriate design methods are used in the design of waste packages and ancillary components (the drip shields and emplacement pallets). The methodology includes identification of necessary design inputs, justification of design assumptions, and use of appropriate analysis methods, and computational tools. This design work is subject to ''Quality Assurance Requirements and Description''. The document is primarily intended for internal use and technical guidance for a variety of design activities. It is recognized that a wide audience including project management, the U.S. Department of Energy (DOE), the U.S. Nuclear Regulatory Commission, and others are interested to various levels of detail in the design methods and therefore covers a wide range of topics at varying levels of detail. Due to the preliminary nature of the design, readers can expect to encounter varied levels of detail in the body of the report. It is expected that technical information used as input to design documents will be verified and taken from the latest versions of reference sources given herein. This revision of the methodology report has evolved with changes in the waste package, drip shield, and emplacement pallet designs over many years and may be further revised as the design is finalized. Different components and analyses are at different stages of development. Some parts of the report are detailed, while other less detailed parts are likely to undergo further refinement. The design methodology is intended to provide designs that satisfy the safety and operational

  5. Waste Package Component Design Methodology Report

    Energy Technology Data Exchange (ETDEWEB)

    D.C. Mecham

    2004-07-12

    This Executive Summary provides an overview of the methodology being used by the Yucca Mountain Project (YMP) to design waste packages and ancillary components. This summary information is intended for readers with general interest, but also provides technical readers a general framework surrounding a variety of technical details provided in the main body of the report. The purpose of this report is to document and ensure appropriate design methods are used in the design of waste packages and ancillary components (the drip shields and emplacement pallets). The methodology includes identification of necessary design inputs, justification of design assumptions, and use of appropriate analysis methods, and computational tools. This design work is subject to ''Quality Assurance Requirements and Description''. The document is primarily intended for internal use and technical guidance for a variety of design activities. It is recognized that a wide audience including project management, the U.S. Department of Energy (DOE), the U.S. Nuclear Regulatory Commission, and others are interested to various levels of detail in the design methods and therefore covers a wide range of topics at varying levels of detail. Due to the preliminary nature of the design, readers can expect to encounter varied levels of detail in the body of the report. It is expected that technical information used as input to design documents will be verified and taken from the latest versions of reference sources given herein. This revision of the methodology report has evolved with changes in the waste package, drip shield, and emplacement pallet designs over many years and may be further revised as the design is finalized. Different components and analyses are at different stages of development. Some parts of the report are detailed, while other less detailed parts are likely to undergo further refinement. The design methodology is intended to provide designs that satisfy the safety

  6. Baseline methodologies for clean development mechanism projects

    Energy Technology Data Exchange (ETDEWEB)

    Lee, M.K. (ed.); Shrestha, R.M.; Sharma, S.; Timilsina, G.R.; Kumar, S.

    2005-11-15

    The Kyoto Protocol and the Clean Development Mechanism (CDM) came into force on 16th February 2005 with its ratification by Russia. The increasing momentum of this process is reflected in more than 100 projects having been submitted to the CDM Executive Board (CDM-EB) for approval of the baselines and monitoring methodologies, which is the first step in developing and implementing CDM projects. A CDM project should result in a net decrease of GHG emissions below any level that would have resulted from other activities implemented in the absence of that CDM project. The 'baseline' defines the GHG emissions of activities that would have been implemented in the absence of a CDM project. The baseline methodology is the process/algorithm for establishing that baseline. The baseline, along with the baseline methodology, are thus the most critical element of any CDM project towards meeting the important criteria of CDM, which are that a CDM should result in 'real, measurable, and long term benefits related to the mitigation of climate change'. This guidebook is produced within the frame work of the United Nations Environment Programme (UNEP) facilitated 'Capacity Development for the Clean Development Mechanism (CD4CDM)' Project. This document is published as part of the projects effort to develop guidebooks that cover important issues such as project finance, sustainability impacts, legal framework and institutional framework. These materials are aimed to help stakeholders better understand the CDM and are believed to eventually contribute to maximize the effect of the CDM in achieving the ultimate goal of UNFCCC and its Kyoto Protocol. This Guidebook should be read in conjunction with the information provided in the two other guidebooks entitled, 'Clean Development Mechanism: Introduction to the CDM' and 'CDM Information and Guidebook' developed under the CD4CDM project. (BA)

  7. A Performance Tuning Methodology with Compiler Support

    Directory of Open Access Journals (Sweden)

    Oscar Hernandez

    2008-01-01

    Full Text Available We have developed an environment, based upon robust, existing, open source software, for tuning applications written using MPI, OpenMP or both. The goal of this effort, which integrates the OpenUH compiler and several popular performance tools, is to increase user productivity by providing an automated, scalable performance measurement and optimization system. In this paper we describe our environment, show how these complementary tools can work together, and illustrate the synergies possible by exploiting their individual strengths and combined interactions. We also present a methodology for performance tuning that is enabled by this environment. One of the benefits of using compiler technology in this context is that it can direct the performance measurements to capture events at different levels of granularity and help assess their importance, which we have shown to significantly reduce the measurement overheads. The compiler can also help when attempting to understand the performance results: it can supply information on how a code was translated and whether optimizations were applied. Our methodology combines two performance views of the application to find bottlenecks. The first is a high level view that focuses on OpenMP/MPI performance problems such as synchronization cost and load imbalances; the second is a low level view that focuses on hardware counter analysis with derived metrics that assess the efficiency of the code. Our experiments have shown that our approach can significantly reduce overheads for both profiling and tracing to acceptable levels and limit the number of times the application needs to be run with selected hardware counters. In this paper, we demonstrate the workings of this methodology by illustrating its use with selected NAS Parallel Benchmarks and a cloud resolving code.

  8. Baseline methodologies for clean development mechanism projects

    International Nuclear Information System (INIS)

    Lee, M.K.; Shrestha, R.M.; Sharma, S.; Timilsina, G.R.; Kumar, S.

    2005-11-01

    The Kyoto Protocol and the Clean Development Mechanism (CDM) came into force on 16th February 2005 with its ratification by Russia. The increasing momentum of this process is reflected in more than 100 projects having been submitted to the CDM Executive Board (CDM-EB) for approval of the baselines and monitoring methodologies, which is the first step in developing and implementing CDM projects. A CDM project should result in a net decrease of GHG emissions below any level that would have resulted from other activities implemented in the absence of that CDM project. The 'baseline' defines the GHG emissions of activities that would have been implemented in the absence of a CDM project. The baseline methodology is the process/algorithm for establishing that baseline. The baseline, along with the baseline methodology, are thus the most critical element of any CDM project towards meeting the important criteria of CDM, which are that a CDM should result in 'real, measurable, and long term benefits related to the mitigation of climate change'. This guidebook is produced within the frame work of the United Nations Environment Programme (UNEP) facilitated 'Capacity Development for the Clean Development Mechanism (CD4CDM)' Project. This document is published as part of the projects effort to develop guidebooks that cover important issues such as project finance, sustainability impacts, legal framework and institutional framework. These materials are aimed to help stakeholders better understand the CDM and are believed to eventually contribute to maximize the effect of the CDM in achieving the ultimate goal of UNFCCC and its Kyoto Protocol. This Guidebook should be read in conjunction with the information provided in the two other guidebooks entitled, 'Clean Development Mechanism: Introduction to the CDM' and 'CDM Information and Guidebook' developed under the CD4CDM project. (BA)

  9. Muscle dysmorphia: methodological issues, implications for research.

    Science.gov (United States)

    Suffolk, Mark T; Dovey, Terence M; Goodwin, Huw; Meyer, Caroline

    2013-01-01

    Muscle dysmorphia is a male-dominated, body image-related psychological condition. Despite continued investigation, contention surrounds the nosological status of this disorder. The aim of this article was to review the literature on muscle dysmorphia to provide a qualitative account of methodological issues that may inhibit our understanding. Key areas relating to non-standardized participant groups, measuring instruments, and terminology were identified as potentially inhibiting symptom coherence and diagnostic reliability. New measuring instruments validated with clinical samples and carefully described participant groups, standardized terminology, and a greater emphasis on prospective longitudinal research with specific sub groups of the weight training community would be of interest to the field.

  10. An Innovative Synthesis Methodology for Process Intensification

    DEFF Research Database (Denmark)

    Lutze, Philip

    to improve a process. However, to date only a limited number have achieved implementation in industry, such as reactive distillation, dividing wall columns and reverse flow reactors. A reason for this is that the identification of the best PI option is neither simple nor systematic. That is to decide where......‐based solution approach. Starting from an analysis of existing processes, the methodology generates a set of PI process options. Subsequently, the initial search space is reduced through an ordered sequence of steps. As the search space decreases, more process details are added, increasing the complexity...

  11. Simulation and Modeling Methodologies, Technologies and Applications

    CERN Document Server

    Filipe, Joaquim; Kacprzyk, Janusz; Pina, Nuno

    2014-01-01

    This book includes extended and revised versions of a set of selected papers from the 2012 International Conference on Simulation and Modeling Methodologies, Technologies and Applications (SIMULTECH 2012) which was sponsored by the Institute for Systems and Technologies of Information, Control and Communication (INSTICC) and held in Rome, Italy. SIMULTECH 2012 was technically co-sponsored by the Society for Modeling & Simulation International (SCS), GDR I3, Lionphant Simulation, Simulation Team and IFIP and held in cooperation with AIS Special Interest Group of Modeling and Simulation (AIS SIGMAS) and the Movimento Italiano Modellazione e Simulazione (MIMOS).

  12. Risk-based Regulatory Evaluation Program methodology

    International Nuclear Information System (INIS)

    DuCharme, A.R.; Sanders, G.A.; Carlson, D.D.; Asselin, S.V.

    1987-01-01

    The objectives of this DOE-supported Regulatory Evaluation Progrwam are to analyze and evaluate the safety importance and economic significance of existing regulatory guidance in order to assist in the improvement of the regulatory process for current generation and future design reactors. A risk-based cost-benefit methodology was developed to evaluate the safety benefit and cost of specific regulations or Standard Review Plan sections. Risk-based methods can be used in lieu of or in combination with deterministic methods in developing regulatory requirements and reaching regulatory decisions

  13. Ecological impact study methodology for hydrotechnical projects

    International Nuclear Information System (INIS)

    Manoliu, Mihai; Toculescu, Razvan

    1993-01-01

    Besides the expected benefits, hydrotechnical projects may entail unfavorable effects on the hydrological regime, environment, health and living conditions of the population. Rational water resource management should take into consideration both the favorable and unfavorable effects. This implies the assessment of socio-economic and environmental impacts of the changes of the hydrological regime. The paper proposes a methodology for carrying out impact studies of hydrotechnical projects. The results of the work are presented graphically on the basis of composite programing. A summary of mathematical methods involved in impact study design is also presented. (authors)

  14. Team building: conceptual, methodological, and applied considerations.

    Science.gov (United States)

    Beauchamp, Mark R; McEwan, Desmond; Waldhauser, Katrina J

    2017-08-01

    Team building has been identified as an important method of improving the psychological climate in which teams operate, as well as overall team functioning. Within the context of sports, team building interventions have consistently been found to result in improvements in team effectiveness. In this paper we review the extant literature on team building in sport, and address a range of conceptual, methodological, and applied considerations that have the potential to advance theory, research, and applied intervention initiatives within the field. This involves expanding the scope of team building strategies that have, to date, primarily focused on developing group cohesion. Copyright © 2017 Elsevier Ltd. All rights reserved.

  15. Sociocultural Meanings of Nanotechnology: Research Methodologies

    Science.gov (United States)

    Bainbridge, William Sims

    2004-06-01

    This article identifies six social-science research methodologies that will be useful for charting the sociocultural meaning of nanotechnology: web-based questionnaires, vignette experiments, analysis of web linkages, recommender systems, quantitative content analysis, and qualitative textual analysis. Data from a range of sources are used to illustrate how the methods can delineate the intellectual content and institutional structure of the emerging nanotechnology culture. Such methods will make it possible in future to test hypotheses such as that there are two competing definitions of nanotechnology - the technical-scientific and the science-fiction - that are influencing public perceptions by different routes and in different directions.

  16. Design methodology and projects for space engineering

    Science.gov (United States)

    Nichols, S.; Kleespies, H.; Wood, K.; Crawford, R.

    1993-01-01

    NASA/USRA is an ongoing sponsor of space design projects in the senior design course of the Mechanical Engineering Department at The University of Texas at Austin. This paper describes the UT senior design sequence, consisting of a design methodology course and a capstone design course. The philosophical basis of this sequence is briefly summarized. A history of the Department's activities in the Advanced Design Program is then presented. The paper concludes with a description of the projects completed during the 1991-92 academic year and the ongoing projects for the Fall 1992 semester.

  17. Evolving Intelligent Systems Methodology and Applications

    CERN Document Server

    Angelov, Plamen; Kasabov, Nik

    2010-01-01

    From theory to techniques, the first all-in-one resource for EIS. There is a clear demand in advanced process industries, defense, and Internet and communication (VoIP) applications for intelligent yet adaptive/evolving systems. Evolving Intelligent Systems is the first self- contained volume that covers this newly established concept in its entirety, from a systematic methodology to case studies to industrial applications. Featuring chapters written by leading world experts, it addresses the progress, trends, and major achievements in this emerging research field, with a strong emphasis on th

  18. Nuclear methodology development for clinical analysis

    International Nuclear Information System (INIS)

    Oliveira, Laura Cristina de

    2003-01-01

    In the present work the viability of using the neutron activation analysis to perform urine and blood clinical analysis was checked. The aim of this study is to investigate the biological behavior of animals that has been fed with chow doped by natural uranium for a long period. Aiming at time and cost reduction, the absolute method was applied to determine element concentration on biological samples. The quantitative results of urine sediment using NAA were compared with the conventional clinical analysis and the results were compatible. This methodology was also used on bone and body organs such as liver and muscles to help the interpretation of possible anomalies. (author)

  19. Methodological triangulation in work life research

    DEFF Research Database (Denmark)

    Warring, Niels

    Based on examples from two research projects on preschool teachers' work, the paper will discuss potentials and challenges in methodological triangulation in work life research. Analysis of ethnographic and phenomenological inspired observations of everyday life in day care centers formed the basis...... for individual interviews and informal talks with employees. The interviews and conversations were based on a critical hermeneutic approach. The analysis of observations and interviews constituted a knowledge base as the project went in to the last phase: action research workshops. In the workshops findings from...

  20. A Goal based methodology for HAZOP analysis

    DEFF Research Database (Denmark)

    Rossing, Netta Liin; Lind, Morten; Jensen, Niels

    2010-01-01

    to nodes with simple functions such as liquid transport, gas transport, liquid storage, gas-liquid contacting etc. From the functions of the nodes the selection of relevant process variables and deviation variables follows directly. The knowledge required to perform the pre-meeting HAZOP task of dividing...... the plant along functional lines is that of chemical unit operations and transport processes plus a some familiarity with the plant a hand. Thus the preparatory work may be performed by a chemical engineer with just an introductory course in risk assessment. The goal based methodology lends itself directly...

  1. Private events: from methodological behaviorism to interbehaviorism

    Directory of Open Access Journals (Sweden)

    Roberto Bueno

    2011-09-01

    Full Text Available As supposed events being accessible to a unique observer, private events posit an interesting challenge to a behavioristic psychology. Three historical variants of behaviorism dealt with the problem of private events: methodological behaviorism, radical behaviorism and interbehaviorism. The basic argument of the two last views, and that distinguishes them from the former, is that private events are comprised into the scope of an objective science of behavior. The analysis of these accounts permits us to confirm a gradual advance in behavior theory, in dealing with this issue, toward a totally monistic view.

  2. Methodologies for local development in smart society

    Directory of Open Access Journals (Sweden)

    Lorena BĂTĂGAN

    2012-07-01

    Full Text Available All of digital devices which are connected through the Internet, are producing a big quantity of data. All this information can be turned into knowledge because we now have the computational power and solutions for advanced analytics to make sense of it. With this knowledge, cities could reduce costs, cut waste, and improve efficiency, productivity and quality of life for their citizens. The efficient/smart cities are characterized by more importance given to environment, resources, globalization and sustainable development. This paper represents a study on the methodologies for urban development that become the central element to our society.

  3. Coupling methodology within the software platform alliances

    Energy Technology Data Exchange (ETDEWEB)

    Montarnal, Ph; Deville, E; Adam, E; Bengaouer, A [CEA Saclay, Dept. de Modelisation des Systemes et Structures 91 - Gif-sur-Yvette (France); Dimier, A; Gaombalet, J; Loth, L [Agence Nationale pour la Gestion des Dechets Radioactifs (ANDRA), 92 - Chatenay Malabry (France); Chavant, C [Electricite de France (EDF), 92 - Clamart (France)

    2005-07-01

    CEA, ANDRA and EDF are jointly developing the software platform ALLIANCES which aim is to produce a tool for the simulation of nuclear waste storage and disposal repository. This type of simulations deals with highly coupled thermo-hydro-mechanical and chemical (T-H-M-C) processes. A key objective of Alliances is to give the capability for coupling algorithms development between existing codes. The aim of this paper is to present coupling methodology use in the context of this software platform. (author)

  4. Coupling methodology within the software platform alliances

    International Nuclear Information System (INIS)

    Montarnal, Ph.; Deville, E.; Adam, E.; Bengaouer, A.; Dimier, A.; Gaombalet, J.; Loth, L.; Chavant, C.

    2005-01-01

    CEA, ANDRA and EDF are jointly developing the software platform ALLIANCES which aim is to produce a tool for the simulation of nuclear waste storage and disposal repository. This type of simulations deals with highly coupled thermo-hydro-mechanical and chemical (T-H-M-C) processes. A key objective of Alliances is to give the capability for coupling algorithms development between existing codes. The aim of this paper is to present coupling methodology use in the context of this software platform. (author)

  5. Doing methodological cosmopolitanism in a mobile world

    DEFF Research Database (Denmark)

    Tyfield, David; Blok, Anders

    2016-01-01

    A decade of mobilities research has responded to the key question of how a ‘world on the move’ can and should be studied, including in terms of futures thereby brought into view and possibly shaped into being. What happens, however, if we shift our focus from the ‘world on the move’ to the ‘world...... imperatives, specifically regarding dynamic, interactive and power-attentive forms of social knowledge-making or phronesis, a situated practical wisdom. We illustrate these points in brief with insights from our own methodologically cosmopolitan research on key contemporary cosmopolitized issues, undertaken...

  6. Reforming science: methodological and cultural reforms.

    Science.gov (United States)

    Casadevall, Arturo; Fang, Ferric C

    2012-03-01

    Contemporary science has brought about technological advances and an unprecedented understanding of the natural world. However, there are signs of dysfunction in the scientific community as well as threats from diverse antiscience and political forces. Incentives in the current system place scientists under tremendous stress, discourage cooperation, encourage poor scientific practices, and deter new talent from entering the field. It is time for a discussion of how the scientific enterprise can be reformed to become more effective and robust. Serious reform will require more consistent methodological rigor and a transformation of the current hypercompetitive scientific culture.

  7. Software Innovation - Values for a Methodology

    DEFF Research Database (Denmark)

    Aaen, Ivan

    2013-01-01

    Innovation is a recurrent theme in public as well as academic debate, and software development plays a major role for innovation in about every sector of our economy. As a consequence, software innovation will play an increasingly important role in software development. The focus in this paper is...... for experimentation, learning, and flexibility in software projects, but how can this change be used to facilitate software innovation? This paper proposes a set of values to guide the development of a methodology to facilitate software innovation....

  8. Creating and evaluating a new clicker methodology

    Science.gov (United States)

    Li, Pengfei

    "Clickers", an in-class polling system, has been used by many instructors to add active learning and formative assessment to previously passive traditional lectures. While considerable research has been conducted on clicker increasing student interaction in class, less research has been reported on the effectiveness of using clicker to help students understand concepts. This thesis reported a systemic project by the OSU Physics Education group to develop and test a new clicker methodology. Clickers question sequences based on a constructivist model of learning were used to improve classroom dynamics and student learning. They also helped students and lecturers understand in real time whether a concept had been assimilated or more effort was required. Chapter 1 provided an introduction to the clicker project. Chapter 2 summarized widely-accepted teaching principles that have arisen from a long history of research and practice in psychology, cognitive science and physics education. The OSU clicker methodology described in this thesis originated partly from our years of teaching experience, but mostly was based on these teaching principles. Chapter 3 provided an overview of the history of clicker technology and different types of clickers. Also, OSU's use of clickers was summarized together with a list of common problems and corresponding solutions. These technical details may be useful for those who want to use clickers. Chapter 4 discussed examples of the type and use of question sequences based on the new clicker methodology. In several years of research, we developed a base of clicker materials for calculus-based introductory physics courses at OSU. As discussed in chapter 5, a year-long controlled quantitative study was conducted to determine whether using clickers helps students learn, how using clickers helps students learn and whether students perceive that clicker has a positive effect on their own learning process. The strategy for this test was based on

  9. Top Level Space Cost Methodology (TLSCM)

    Science.gov (United States)

    1997-12-02

    Software 7 6. ACEIT . 7 C. Ground Rules and Assumptions 7 D. Typical Life Cycle Cost Distribution 7 E. Methodologies 7 1. Cost/budget Threshold 9 2. Analogy...which is based on real-time Air Force and space programs. Ref.(25:2- 8, 2-9) 6. ACEIT : Automated Cost Estimating Integrated Tools( ACEIT ), Tecolote...Research, Inc. There is a way to use the ACEIT cost program to get a print-out of an expanded WBS. Therefore, find someone that has ACEIT experience and

  10. Development of a flight software testing methodology

    Science.gov (United States)

    Mccluskey, E. J.; Andrews, D. M.

    1985-01-01

    The research to develop a testing methodology for flight software is described. An experiment was conducted in using assertions to dynamically test digital flight control software. The experiment showed that 87% of typical errors introduced into the program would be detected by assertions. Detailed analysis of the test data showed that the number of assertions needed to detect those errors could be reduced to a minimal set. The analysis also revealed that the most effective assertions tested program parameters that provided greater indirect (collateral) testing of other parameters. In addition, a prototype watchdog task system was built to evaluate the effectiveness of executing assertions in parallel by using the multitasking features of Ada.

  11. Methodology for risk analysis of nuclear installations

    International Nuclear Information System (INIS)

    Vasconcelos, Vanderley de; Senne Junior, Murillo; Jordao, Elizabete

    2002-01-01

    Both the licensing standards for general uses in nuclear facilities and the specific ones require a risk assessment during their licensing processes. The risk assessment is carried out through the estimation of both probability of the occurrence of the accident, and their magnitudes. This is a complex task because the great deal of potential hazardous events that can occur in nuclear facilities difficult the statement of the accident scenarios. There are also many available techniques to identify the potential accidents, estimate their probabilities, and evaluate their magnitudes. In this paper is presented a new methodology that systematizes the risk assessment process, and orders the accomplishment of their several steps. (author)

  12. Tendances Carbone. Methodology - version 2, jan 2007

    International Nuclear Information System (INIS)

    2007-01-01

    'Tendances Carbone' newsletter makes a monthly synthesis of the European CO 2 market thanks to the use of 6 groups of indicators: traded volumes and spot prices, climate indexes (temperature, precipitations), economic activity indicators (industrial production index, confidence index of business leaders), energy indicators (changes in energy prices, clean dark spread and clean spark spread), CO 2 quota prices, and institutional environment. This second methodological issue explains the calculation methods and the conventions used for the establishment of these different indexes. (J.S.)

  13. Well logging instrumental and methodological research

    International Nuclear Information System (INIS)

    Andrassy, L.; Barath, I.; Dorko, R.

    1983-01-01

    This part of the Annual Report of the Roland Eoetvoes Geophysical Institute (ELGI) of Hungary for 1982, summarizes the well logging instrumental and methodological researches of ELGI. The theoretical neutron diffusion fluxes for black and brown coals of Hungarian mines were calculated. A coal probe was developed and tested in boreholes using computerized data processing and interpretation. An X-ray radiometric method was used for the determination of Cu and Fe contents of minerals. Researches in the field of magnetic susceptibility and induced polarization logging are also summarized. A rapid analyzer for bauxite mining and a photorecorder for petroleum industry were developed by ELGI. (D.Gy.)

  14. Mining software specifications methodologies and applications

    CERN Document Server

    Lo, David

    2011-01-01

    An emerging topic in software engineering and data mining, specification mining tackles software maintenance and reliability issues that cost economies billions of dollars each year. The first unified reference on the subject, Mining Software Specifications: Methodologies and Applications describes recent approaches for mining specifications of software systems. Experts in the field illustrate how to apply state-of-the-art data mining and machine learning techniques to address software engineering concerns. In the first set of chapters, the book introduces a number of studies on mining finite

  15. Methodology of shell structure reinforcement layout optimization

    Science.gov (United States)

    Szafrański, Tomasz; Małachowski, Jerzy; Damaziak, Krzysztof

    2018-01-01

    This paper presents an optimization process of a reinforced shell diffuser intended for a small wind turbine (rated power of 3 kW). The diffuser structure consists of multiple reinforcement and metal skin. This kind of structure is suitable for optimization in terms of selection of reinforcement density, stringers cross sections, sheet thickness, etc. The optimisation approach assumes the reduction of the amount of work to be done between the optimization process and the final product design. The proposed optimization methodology is based on application of a genetic algorithm to generate the optimal reinforcement layout. The obtained results are the basis for modifying the existing Small Wind Turbine (SWT) design.

  16. Update of Part 61 Impacts Analysis Methodology. Methodology report. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    Oztunali, O.I.; Roles, G.W.

    1986-01-01

    Under contract to the US Nuclear Regulatory Commission, the Envirosphere Company has expanded and updated the impacts analysis methodology used during the development of the 10 CFR Part 61 rule to allow improved consideration of the costs and impacts of treatment and disposal of low-level waste that is close to or exceeds Class C concentrations. The modifications described in this report principally include: (1) an update of the low-level radioactive waste source term, (2) consideration of additional alternative disposal technologies, (3) expansion of the methodology used to calculate disposal costs, (4) consideration of an additional exposure pathway involving direct human contact with disposed waste due to a hypothetical drilling scenario, and (5) use of updated health physics analysis procedures (ICRP-30). Volume 1 of this report describes the calculational algorithms of the updated analysis methodology.

  17. Update of Part 61 Impacts Analysis Methodology. Methodology report. Volume 1

    International Nuclear Information System (INIS)

    Oztunali, O.I.; Roles, G.W.

    1986-01-01

    Under contract to the US Nuclear Regulatory Commission, the Envirosphere Company has expanded and updated the impacts analysis methodology used during the development of the 10 CFR Part 61 rule to allow improved consideration of the costs and impacts of treatment and disposal of low-level waste that is close to or exceeds Class C concentrations. The modifications described in this report principally include: (1) an update of the low-level radioactive waste source term, (2) consideration of additional alternative disposal technologies, (3) expansion of the methodology used to calculate disposal costs, (4) consideration of an additional exposure pathway involving direct human contact with disposed waste due to a hypothetical drilling scenario, and (5) use of updated health physics analysis procedures (ICRP-30). Volume 1 of this report describes the calculational algorithms of the updated analysis methodology

  18. A Hierarchical Clustering Methodology for the Estimation of Toxicity

    Science.gov (United States)

    A Quantitative Structure Activity Relationship (QSAR) methodology based on hierarchical clustering was developed to predict toxicological endpoints. This methodology utilizes Ward's method to divide a training set into a series of structurally similar clusters. The structural sim...

  19. A methodology for acquiring qualitative knowledge for probabilistic graphical models

    DEFF Research Database (Denmark)

    Kjærulff, Uffe Bro; Madsen, Anders L.

    2004-01-01

    We present a practical and general methodology that simplifies the task of acquiring and formulating qualitative knowledge for constructing probabilistic graphical models (PGMs). The methodology efficiently captures and communicates expert knowledge, and has significantly eased the model...

  20. Towards a Public Sector GIS Evaluation Methodology | Kurwakumire ...

    African Journals Online (AJOL)

    Towards a Public Sector GIS Evaluation Methodology. ... AFRICAN JOURNALS ONLINE (AJOL) · Journals · Advanced Search · USING AJOL · RESOURCES ... However, evaluation methodologies for public sector GIS are largely lacking.

  1. H. Odera Oruka and the Question of Methodology in African ...

    African Journals Online (AJOL)

    H. Odera Oruka and the Question of Methodology in African Philosophy: A Critique. ... AFRICAN JOURNALS ONLINE (AJOL) · Journals · Advanced Search · USING AJOL ... Key Words Methodology, African philosophy, philosophic sagacity, ...

  2. Using a hybrid methodology of dasyametric mapping and data ...

    African Journals Online (AJOL)

    Using a hybrid methodology of dasyametric mapping and data interpolation techniques ... AFRICAN JOURNALS ONLINE (AJOL) · Journals · Advanced Search ... the value and accuracy of the developed methodology is that of the 2011 census ...

  3. History and Methodology in a Nigerian University | Adesina ...

    African Journals Online (AJOL)

    History and Methodology in a Nigerian University. ... AFRICAN JOURNALS ONLINE (AJOL) · Journals · Advanced Search · USING AJOL · RESOURCES ... School of History), is the issue of methodology and in particular, the use of theories.

  4. Application of Response Surface Methodology for Optimizing Oil ...

    African Journals Online (AJOL)

    Application of Response Surface Methodology for Optimizing Oil Extraction Yield From ... AFRICAN JOURNALS ONLINE (AJOL) · Journals · Advanced Search ... from tropical almond seed by the use of response surface methodology (RSM).

  5. Legal Research Methodology and the Dream of Interdisciplinarity ...

    African Journals Online (AJOL)

    Legal Research Methodology and the Dream of Interdisciplinarity. ... AFRICAN JOURNALS ONLINE (AJOL) · Journals · Advanced Search · USING AJOL ... Whilst the natural sciences employ a mostly empiricist methodology and the human ...

  6. Methodology for evaluation of railroad technology research projects

    Science.gov (United States)

    1981-04-01

    This Project memorandum presents a methodology for evaluating railroad research projects. The methodology includes consideration of industry and societal benefits, with special attention given to technical risks, implementation considerations, and po...

  7. Robust Optimization in Simulation : Taguchi and Response Surface Methodology

    NARCIS (Netherlands)

    Dellino, G.; Kleijnen, J.P.C.; Meloni, C.

    2008-01-01

    Optimization of simulated systems is tackled by many methods, but most methods assume known environments. This article, however, develops a 'robust' methodology for uncertain environments. This methodology uses Taguchi's view of the uncertain world, but replaces his statistical techniques by

  8. Privacy and CHI : methodologies for studying privacy issues

    NARCIS (Netherlands)

    Patil, S.; Romero, N.A.; Karat, J.

    2006-01-01

    This workshop aims to reflect on methodologies to empirically study privacy issues related to advanced technology. The goal is to address methodological concerns by drawing upon both theoretical perspectives as well as practical experiences.

  9. Methodology for assessing laser-based equipment

    Science.gov (United States)

    Pelegrina-Bonilla, Gabriel; Hermsdorf, Jörg; Thombansen, Ulrich; Abels, Peter; Kaierle, Stefan; Neumann, Jörg

    2017-10-01

    Methodologies for the assessment of technology's maturity are widely used in industry and research. Probably the best known are technology readiness levels (TRLs), initially pioneered by the National Aeronautics and Space Administration (NASA). At the beginning, only descriptively defined TRLs existed, but over time, automated assessment techniques in the form of questionnaires emerged in order to determine TRLs. Originally TRLs targeted equipment for space applications, but the demands on industrial relevant equipment are partly different in terms of, for example, overall costs, product quantities, or the presence of competitors. Therefore, we present a commonly valid assessment methodology with the aim of assessing laser-based equipment for industrial use, in general. The assessment is carried out with the help of a questionnaire, which allows for a user-friendly and easy accessible way to monitor the progress from the lab-proven state to the application-ready product throughout the complete development period. The assessment result is presented in a multidimensional metric in order to reveal the current specific strengths and weaknesses of the equipment development process, which can be used to direct the remaining development process of the equipment in the right direction.

  10. Qualitative interviewing: methodological challenges in Arab settings.

    Science.gov (United States)

    Hawamdeh, Sana; Raigangar, Veena

    2014-01-01

    To explore some of the main methodological challenges faced by interviewers in Arab settings, particularly during interviews with psychiatric nurses. Interviews are a tool used commonly in qualitative research. However, the cultural norms and practices of interviewees must be considered to ensure that an appropriate interviewing style is used, a good interviewee-interviewer relationship formed and consent for participation obtained sensitively. A study to explore the nature of psychiatric nurses' practices that used unstructured interviews. This is a methodology paper that discusses a personal experience of addressing many challenges that are specific to qualitative interviewing in Arab settings, supported by literature on the topic. Suggestions for improving the interview process to make it more culturally sensitive are provided and recommendations for future research are made. Openness, flexibility and a reflexive approach by the researcher can help manage challenges in Arab settings. Researchers should allow themselves to understand the cultural elements of a population to adapt interviewing methods with the aim of generating high quality qualitative research.

  11. Methodologies for Social Life Cycle Assessment

    DEFF Research Database (Denmark)

    Jørgensen, Andreas; Le Bocq, Agathe; Nazakina, Liudmila

    2008-01-01

    Goal, Scope and Background. In recent years several different approaches towards Social Life Cycle Assessment (SLCA) have been developed. The purpose of this review is to compare these approaches in order to highlight methodological differences and general shortcomings. SLCA has several similarit......Goal, Scope and Background. In recent years several different approaches towards Social Life Cycle Assessment (SLCA) have been developed. The purpose of this review is to compare these approaches in order to highlight methodological differences and general shortcomings. SLCA has several...... similarities with other social assessment tools, but in order to limit the review, only claims to address social impacts from an LCA-like framework is considered. Main Features. The review is to a large extent based on conference proceedings and reports of which some are not easily accessible, since very...... stage in the product life cycle. Another very important difference among the proposals is their position towards the use of generic data. Several of the proposals argue that social impacts are connected to the conduct of the company leading to the conclusion that each individual company in the product...

  12. Hadoop Cluster Deployment: A Methodological Approach

    Directory of Open Access Journals (Sweden)

    Ronaldo Celso Messias Correia

    2018-05-01

    Full Text Available For a long time, data has been treated as a general problem because it just represents fractions of an event without any relevant purpose. However, the last decade has been just about information and how to get it. Seeking meaning in data and trying to solve scalability problems, many frameworks have been developed to improve data storage and its analysis. As a framework, Hadoop was presented as a powerful tool to deal with large amounts of data. However, it still causes doubts about how to deal with its deployment and if there is any reliable method to compare the performance of distinct Hadoop clusters. This paper presents a methodology based on benchmark analysis to guide the Hadoop cluster deployment. The experiments employed The Apache Hadoop and the Hadoop distributions of Cloudera, Hortonworks, and MapR, analyzing the architectures on local and on clouding—using centralized and geographically distributed servers. The results show the methodology can be dynamically applied on a reliable comparison among different architectures. Additionally, the study suggests that the knowledge acquired can be used to improve the data analysis process by understanding the Hadoop architecture.

  13. Research methodological issues in evaluating herbal interventions

    Directory of Open Access Journals (Sweden)

    Dipika Bansal

    2010-02-01

    Full Text Available Dipika Bansal, Debasish Hota, Amitava ChakrabartiPostgraduate Institute of Medical Education and Research, Chandigarh, IndiaAbstract: Randomized controlled trials provide the best evidence, and is seen as the gold standard for allopathic research. Herbal therapies are not an integral part of conventional care although they are still used by patients in their health care management. These medicines need to be subjected to rigorous research to establish their effectiveness and safety. Clearly defined treatments are required and should be recorded in a manner that enables other suitably trained researchers to reproduce them reliably. Quality control of herbal products is also a prerequisite of credible clinical trials. Methodological strategies for investigating the herbal interventions and the issues regarding appropriate patient selection, randomization and blinding, placebo effects and choice of comparator, occupational standardization and the selection of appropriate study endpoints to prove efficacy are being discussed. This paper will review research options and propose some suggestions for future research design.Keywords: CAM research, herbal therapies, methodology, clinical trial

  14. Investigating surety methodologies for cognitive systems.

    Energy Technology Data Exchange (ETDEWEB)

    Caudell, Thomas P. (University of New Mexico, Albuquerque, NM); Peercy, David Eugene; Mills, Kristy (University of New Mexico, Albuquerque, NM); Caldera, Eva (University of New Mexico, Albuquerque, NM)

    2006-11-01

    Advances in cognitive science provide a foundation for new tools that promise to advance human capabilities with significant positive impacts. As with any new technology breakthrough, associated technical and non-technical risks are involved. Sandia has mitigated both technical and non-technical risks by applying advanced surety methodologies in such areas as nuclear weapons, nuclear reactor safety, nuclear materials transport, and energy systems. In order to apply surety to the development of cognitive systems, we must understand the concepts and principles that characterize the certainty of a system's operation as well as the risk areas of cognitive sciences. This SAND report documents a preliminary spectrum of risks involved with cognitive sciences, and identifies some surety methodologies that can be applied to potentially mitigate such risks. Some potential areas for further study are recommended. In particular, a recommendation is made to develop a cognitive systems epistemology framework for more detailed study of these risk areas and applications of surety methods and techniques.

  15. Case Study Research: Foundations and Methodological Orientations

    Directory of Open Access Journals (Sweden)

    Helena Harrison

    2017-01-01

    Full Text Available Over the last forty years, case study research has undergone substantial methodological development. This evolution has resulted in a pragmatic, flexible research approach, capable of providing comprehensive in-depth understanding of a diverse range of issues across a number of disciplines. Change and progress have stemmed from parallel influences of historical transformations in approaches to research and individual researcher's preferences, perspectives, and interpretations of this design. Researchers who have contributed to the development of case study research come from diverse disciplines with different philosophical perspectives, resulting in a variety of definitions and approaches. For the researcher new to using case study, such variety can create a confusing platform for its application. In this article, we explore the evolution of case study research, discuss methodological variations, and summarize key elements with the aim of providing guidance on the available options for researchers wanting to use case study in their work. URN: http://nbn-resolving.de/urn:nbn:de:0114-fqs1701195

  16. Methodology for reliability based condition assessment

    International Nuclear Information System (INIS)

    Mori, Y.; Ellingwood, B.

    1993-08-01

    Structures in nuclear power plants may be exposed to aggressive environmental effects that cause their strength to decrease over an extended period of service. A major concern in evaluating the continued service for such structures is to ensure that in their current condition they are able to withstand future extreme load events during the intended service life with a level of reliability sufficient for public safety. This report describes a methodology to facilitate quantitative assessments of current and future structural reliability and performance of structures in nuclear power plants. This methodology takes into account the nature of past and future loads, and randomness in strength and in degradation resulting from environmental factors. An adaptive Monte Carlo simulation procedure is used to evaluate time-dependent system reliability. The time-dependent reliability is sensitive to the time-varying load characteristics and to the choice of initial strength and strength degradation models but not to correlation in component strengths within a system. Inspection/maintenance strategies are identified that minimize the expected future costs of keeping the failure probability of a structure at or below an established target failure probability during its anticipated service period

  17. A risk-based sensor placement methodology

    International Nuclear Information System (INIS)

    Lee, Ronald W.; Kulesz, James J.

    2008-01-01

    A risk-based sensor placement methodology is proposed to solve the problem of optimal location of sensors to protect population against the exposure to, and effects of, known and/or postulated chemical, biological, and/or radiological threats. Risk is calculated as a quantitative value representing population at risk from exposure at standard exposure levels. Historical meteorological data are used to characterize weather conditions as the frequency of wind speed and direction pairs. The meteorological data drive atmospheric transport and dispersion modeling of the threats, the results of which are used to calculate risk values. Sensor locations are determined via an iterative dynamic programming algorithm whereby threats detected by sensors placed in prior iterations are removed from consideration in subsequent iterations. In addition to the risk-based placement algorithm, the proposed methodology provides a quantification of the marginal utility of each additional sensor. This is the fraction of the total risk accounted for by placement of the sensor. Thus, the criteria for halting the iterative process can be the number of sensors available, a threshold marginal utility value, and/or a minimum cumulative utility achieved with all sensors

  18. Bayesian methodology for reliability model acceptance

    International Nuclear Information System (INIS)

    Zhang Ruoxue; Mahadevan, Sankaran

    2003-01-01

    This paper develops a methodology to assess the reliability computation model validity using the concept of Bayesian hypothesis testing, by comparing the model prediction and experimental observation, when there is only one computational model available to evaluate system behavior. Time-independent and time-dependent problems are investigated, with consideration of both cases: with and without statistical uncertainty in the model. The case of time-independent failure probability prediction with no statistical uncertainty is a straightforward application of Bayesian hypothesis testing. However, for the life prediction (time-dependent reliability) problem, a new methodology is developed in this paper to make the same Bayesian hypothesis testing concept applicable. With the existence of statistical uncertainty in the model, in addition to the application of a predictor estimator of the Bayes factor, the uncertainty in the Bayes factor is explicitly quantified through treating it as a random variable and calculating the probability that it exceeds a specified value. The developed method provides a rational criterion to decision-makers for the acceptance or rejection of the computational model

  19. Methodology for allocating reliability and risk

    International Nuclear Information System (INIS)

    Cho, N.Z.; Papazoglou, I.A.; Bari, R.A.

    1986-05-01

    This report describes a methodology for reliability and risk allocation in nuclear power plants. The work investigates the technical feasibility of allocating reliability and risk, which are expressed in a set of global safety criteria and which may not necessarily be rigid, to various reactor systems, subsystems, components, operations, and structures in a consistent manner. The report also provides general discussions on the problem of reliability and risk allocation. The problem is formulated as a multiattribute decision analysis paradigm. The work mainly addresses the first two steps of a typical decision analysis, i.e., (1) identifying alternatives, and (2) generating information on outcomes of the alternatives, by performing a multiobjective optimization on a PRA model and reliability cost functions. The multiobjective optimization serves as the guiding principle to reliability and risk allocation. The concept of ''noninferiority'' is used in the multiobjective optimization problem. Finding the noninferior solution set is the main theme of the current approach. The final step of decision analysis, i.e., assessment of the decision maker's preferences could then be performed more easily on the noninferior solution set. Some results of the methodology applications to a nontrivial risk model are provided, and several outstanding issues such as generic allocation, preference assessment, and uncertainty are discussed. 29 refs., 44 figs., 39 tabs

  20. Methodology of impact assessment of research projects

    International Nuclear Information System (INIS)

    Rodriguez Cardona, R.; Cobas Aranda, M.

    2014-01-01

    In the context of the management of research projects development it is necessary to have tools to monitor and evaluate progress and the performance of the projects, as well as their results and the impact on society (international agencies of the United Nations and the States 2002 and 2005 Paris Declaration), with the objective of to ensure their contribution to the social and economic development of countries. Many organizations, agencies and Governments apply different methodologies (IDB, World Bank, UNDP, ECLAC, UNESCO; UNICEF, Canada, Japan, other) for these purposes. In the results-based project management system not only paramount is the process or product itself, but also the result or impact of the project (if the program/project produced the effects desired persons, households and institutions and whether those effects are attributable to the intervention of the program / project). The work shows a methodology that allows for a qualitative and quantitative evaluation of impact of research projects and has been result of experience in project management of international collaboration with the International Agency for Atomic Energy (IAEA) and the Cuban Nuclear programme. (author)