The nucleon as a test case to calculate vector-isovector form factors at low energies

Science.gov (United States)

Leupold, Stefan

2018-01-01

Extending a recent suggestion for hyperon form factors to the nucleon case, dispersion theory is used to relate the low-energy vector-isovector form factors of the nucleon to the pion vector form factor. The additionally required input, i.e. the pion-nucleon scattering amplitudes are determined from relativistic next-to-leading-order (NLO) baryon chiral perturbation theory including the nucleons and optionally the Delta baryons. Two methods to include pion rescattering are compared: a) solving the Muskhelishvili-Omnès (MO) equation and b) using an N/D approach. It turns out that the results differ strongly from each other. Furthermore the results are compared to a fully dispersive calculation of the (subthreshold) pion-nucleon amplitudes based on Roy-Steiner (RS) equations. In full agreement with the findings from the hyperon sector it turns out that the inclusion of Delta baryons is not an option but a necessity to obtain reasonable results. The magnetic isovector form factor depends strongly on a low-energy constant of the NLO Lagrangian. If it is adjusted such that the corresponding magnetic radius is reproduced, then the results for the corresponding pion-nucleon scattering amplitude (based on the MO equation) agree very well with the RS results. Also in the electric sector the Delta degrees of freedom are needed to obtain the correct order of magnitude for the isovector charge and the corresponding electric radius. Yet quantitative agreement is not achieved. If the subtraction constant that appears in the solution of the MO equation is not taken from nucleon+Delta chiral perturbation theory but adjusted such that the electric radius is reproduced, then one obtains also in this sector a pion-nucleon scattering amplitude that agrees well with the RS results.

The nucleon as a test case to calculate vector-isovector form factors at low energies

Energy Technology Data Exchange (ETDEWEB)

Leupold, Stefan [Uppsala Universitet, Institutionen foer Fysik och Astronomi, Uppsala (Sweden)

2018-01-15

Extending a recent suggestion for hyperon form factors to the nucleon case, dispersion theory is used to relate the low-energy vector-isovector form factors of the nucleon to the pion vector form factor. The additionally required input, i.e. the pion-nucleon scattering amplitudes are determined from relativistic next-to-leading-order (NLO) baryon chiral perturbation theory including the nucleons and optionally the Delta baryons. Two methods to include pion rescattering are compared: a) solving the Muskhelishvili-Omnes (MO) equation and b) using an N/D approach. It turns out that the results differ strongly from each other. Furthermore the results are compared to a fully dispersive calculation of the (subthreshold) pion-nucleon amplitudes based on Roy-Steiner (RS) equations. In full agreement with the findings from the hyperon sector it turns out that the inclusion of Delta baryons is not an option but a necessity to obtain reasonable results. The magnetic isovector form factor depends strongly on a low-energy constant of the NLO Lagrangian. If it is adjusted such that the corresponding magnetic radius is reproduced, then the results for the corresponding pion-nucleon scattering amplitude (based on the MO equation) agree very well with the RS results. Also in the electric sector the Delta degrees of freedom are needed to obtain the correct order of magnitude for the isovector charge and the corresponding electric radius. Yet quantitative agreement is not achieved. If the subtraction constant that appears in the solution of the MO equation is not taken from nucleon+Delta chiral perturbation theory but adjusted such that the electric radius is reproduced, then one obtains also in this sector a pion-nucleon scattering amplitude that agrees well with the RS results. (orig.)

International Observe the Moon Night: Providing Opportunities for the Public to Engage in Lunar Observation

Science.gov (United States)

Hsu, B. C.; Bleacher, L.; Day, B. H.; Daou, D.; Jones, A. P.; Mitchell, B.; Shaner, A. J.; Shipp, S. S.

2010-12-01

International Observe the Moon Night (InOMN) is designed to engage lunar science and education communities, our partner networks, amateur astronomers, space enthusiasts, and the general public in annual lunar observation campaigns that share the excitement of lunar science and exploration. InOMN enables the public to maintain its curiosity about the Moon and gain a better understanding of the Moon's formation, its evolution, and its place in the sky. For 2010, members of the public were encouraged to host their own InOMN events. InOMN hosts such as astronomy clubs, museums, schools, or other groups could find helpful resources and share information about InOMN events they organized on the InOMN website (http://observethemoonnight.org). Images, feedback, and lessons learned from the 2010 InOMN event will be shared in order to encourage increased planning and hosting of InOMN events in 2011. From various interpretations of the lunar “face,” early pictograms of the Moon’s phases, or to the use of the lunar cycle for festivals or harvests, the Moon has an undeniable influence on human civilization. We have chosen the 2011 InOMN theme to provide an opportunity for individuals to share their personal or cultural connections to the Moon. For 2011, the InOMN website will include a ‘lunar bulletin board’ where InOMN participants can post pictures and share stories of what the Moon means to them. The 2011 InOMN contest will encourage people to submit their works of art, poems, short stories, or music about the Moon all centered around the theme “What does the Moon mean to you?” As with the winners of previous contests, winning entries will be incorporated into the following year’s InOMN advertisements and events.

International Observe the Moon Night: Eight Years of Engaging Scientists, Educators, and Citizen Enthusiasts in NASA Science

Science.gov (United States)

Buxner, Sanlyn; Jones, Andrea; Bleacher, Lora; Wasser, Molly; Day, Brian; Bakerman, Maya; Shaner, Andrew; Joseph, Emily; International Observe the Moon Night Coordinating Committee

2018-01-01

International Observe the Moon Night (InOMN) is an annual worldwide event, held in the fall, that celebrates lunar and planetary science and exploration. InOMN is sponsored by NASA’s Lunar Reconnaissance Orbiter (LRO) in collaboration with NASA’s Solar System Exploration Research Virtual Institute (SSERVI), the NASA’s Heliophysics Education Consortium, CosmoQuest, Night Sky Network, and Science Festival Alliance. Other key partners include the NASA Museum Alliance, Night Sky Network, and NASA Solar System Ambassadors.In 2017 InOMN will be held on October 28th, and will engage thousands of people across the globe to observe and learn about the Moon and its connection to planetary science. This year, we have partnered with the NASA Science Mission Directorate total solar eclipse team to highlight InOMN as an opportunity to harness and sustain the interest and momentum in space science and observation following the August 21st eclipse. Since 2010, over 3,800 InOMN events have been registered engaging over 550,000 visitors worldwide. Most InOMN events are held in the United States, with strong representation from many other countries. We will present current results from the 2017 InOMN evaluation.Through InOMN, we annually provide resources such as event-specific Moon maps, presentations, advertising materials, and certificates of participation. Additionally, InOMN highlights partner resources such as online interfaces including Moon Trek (https://moontrek.jpl.nasa.gov) and CosmoQuest (https://cosmoquest.org/x/) to provide further opportunities to engage with NASA science.Learn more about InOMN at http://observethemoonnight.org.

International Observe the Moon Night: Using Public Outreach Events to Tell Your Story to the Public

Science.gov (United States)

Hsu, B. C.; International Observe the Moon Night Coordinating Committee

2011-12-01

From various interpretations of the lunar "face," early pictograms of the Moon's phases, or to the use of the lunar cycle for festivals or harvests, the Moon has an undeniable influence on human civilization. International Observe the Moon Night (InOMN) capitalizes on the human connection to the Moon by engaging the public in annual lunar observation campaigns that share the excitement of lunar science and exploration. In 2010 (InOMN's inaugural year), over 500,000 people attended events in 53 countries around the world. About 68% of InOMN hosts - astronomy clubs, museums, schools, or other groups - used the resources on the InOMN website (http://observethemoonnight.org). The InOMN website provided supporting materials for InOMN event hosts in the form of downloadable advertising materials, Moon maps, suggestions for hands-on educational activities, and links to lunar science content. InOMN event participants shared their experiences with the world using the Web and social media, event hosts shared their experiences with evaluation data, and amateur astronomers and photographers shared their images of the Moon through the lunar photography contest. The overwhelming response from InOMN in 2010 represents an untapped potential for infusing cutting edge lunar science and exploration into a large-scale public outreach event.

B{sup ¯}{sub s}→K semileptonic decay from an Omnès improved constituent quark model

Energy Technology Data Exchange (ETDEWEB)

Albertus, C. [Departamento de Física Atómica, Nuclear y Molecular e Instituto Carlos I de Física Teórica y Computacional, Universidad de Granada, Avenida de Fuentenueva s/n, E-18071 Granada (Spain); Hernández, E. [Departamento de Física Fundamental e IUFFyM, Universidad de Salamanca, Plaza de la Merced s/n, E-37008 Salamanca (Spain); Hidalgo-Duque, C.; Nieves, J. [Instituto de Física Corpuscular (IFIC), Centro Mixto CSIC-Universidad de Valencia, Institutos de Investigación de Paterna, Apartado 22085, E-46071 Valencia (Spain)

2014-11-10

We study the f{sup +} form factor for the semileptonic B{sup ¯}{sub s}→K{sup +}ℓ{sup −}ν{sup ¯}{sub ℓ} decay in a constituent quark model. The valence quark estimate is supplemented with the contribution from the B{sup ¯⁎} pole that dominates the high q{sup 2} region. We use a multiply-subtracted Omnès dispersion relation to extend the quark model predictions from its region of applicability near q{sub max}{sup 2}=(M{sub B{sub s}}−M{sub K}){sup 2}∼23.75 GeV{sup 2} to all q{sup 2} values accessible in the physical decay. To better constrain the dependence of f{sup +} on q{sup 2}, we fit the subtraction constants to a combined input from previous light cone sum rule by Duplancic and Melic (2008) [11] and the present quark model results. From this analysis, we obtain Γ(B{sup ¯}{sub s}→K{sup +}ℓ{sup −}ν{sup ¯}{sub ℓ})=(5.47{sub −0.46}{sup +0.54})|V{sub ub}|{sup 2}×10{sup −9} MeV, which is about 10% and 20% higher than the predictions based on Lattice QCD and QCD light cone sum rules respectively. The former predictions, for both the form factor f{sup +}(q{sup 2}) and the differential decay width, lie within the 1σ band of our estimated uncertainties for all q{sup 2} values accessible in the physical decay, except for a quite small region very close to q{sub max}{sup 2}. Differences with the light cone sum results for the form factor f{sup +} are larger than 20% in the region above q{sup 2}=15 GeV{sup 2}.

International Observe the Moon Night: A Worldwide Public Observing Event that Annually Engages Scientists, Educators, and Citizen Enthusiasts in NASA Science

Science.gov (United States)

Buxner, S.; Jones, A. P.; Bleacher, L.; Wasser, M. L.; Day, B. H.; Shaner, A. J.; Bakerman, M. N.; Joseph, E.

2017-12-01

International Observe the Moon Night (InOMN) is an annual worldwide event, held in the fall, that celebrates lunar and planetary science and exploration. InOMN is sponsored by NASA's Lunar Reconnaissance Orbiter (LRO) in collaboration with NASA's Solar System Exploration Research Virtual Institute (SSERVI), the NASA's Heliophysics Education Consortium, CosmoQuest, Night Sky Network, and Science Festival Alliance. Other key partners include the NASA Museum Alliance, Night Sky Network, and NASA Solar System Ambassadors. In 2017, InOMN will bring together thousands of people across the globe to observe and learn about the Moon and its connection to planetary science. We are partnering with the NASA Science Mission Directorate total solar eclipse team to highlight InOMN as an opportunity to harness and sustain the interest and momentum in space science and observation following the August 21st eclipse. This is part of a new partnership with the Sun-Earth Day team, through the Heliophysics Education Consortium, to better connect the two largest NASA-sponsored public engagement events, increase participation in both events, and share best practices in implementation and evaluation between the teams. Over 3,800 InOMN events have been registered between 2010 and 2016, engaging over 550,000 visitors worldwide. Most InOMN events are held in the United States, with strong representation from many other countries. InOMN events are evaluated to determine the value of the events and to allow us to improve the experience for event hosts and visitors. Our results show that InOMN events are hosted by scientists, educators, and citizen enthusiasts around the world who leverage InOMN to bring communities together, get visitors excited and learn about the Moon - and beyond, and share resources to extend engagement in lunar and planetary science and observation. Through InOMN, we annually provide resources such as event-specific Moon maps, presentations, advertising materials, and

Incommensurate phases in the improper ferroelastic MgGeF sub 6 centre dot 6H sub 2 O:Mn sup 2 sup + studied by means of EPR

CERN Document Server

Skrylnik, P G

2002-01-01

The results of an EPR study of the inhomogeneous phases existing in the temperature interval T sub C = 311.0 +- 0.3 K < T < T sub i sub 1 = 403 +- 0.3 K in improper ferroelastic crystals of MgGeF sub 6 centre dot 6H sub 2 O:Mn sup 2 sup + are presented. On the basis of the analysis of the temperature and angle dependences of the experimental parameters and numerical calculations, the conclusion has been drawn that at T sub i sub 1 the crystals considered undergo a transition to a structurally modulated phase and the order parameter of this transition may be the angle of the Mg[H sub 2 O] sub 6 sup 2 sup + octahedra rotation around the crystal C sub 3 -axis. From T sub i sub 1 to T sub C the modes of the modulated phase follow according to a completely classical scenario for incommensurate crystals: the origin of the incommensurate structure with plane-wave modulation at T sub i sub 1 , the appearance of structural phase solitons below T sub i sub 2 = 380 +- 0.3 K and decrease of the soliton density to v...

International Observe the Moon Night - An Opportunity to Participate in the Year of the Solar System While Sharing the Excitement of Lunar Science and Exploration with the Public

Science.gov (United States)

Bleacher, L.; Daou, D.; Day, B. H.; Hsu, B. C.; Jones, A. P.; Mitchell, B.; Shaner, A. J.; Shipp, S. S.

2010-12-01

International Observe the Moon Night (InOMN) is a multi-nation effort to share the excitement of recent lunar missions and new science results with education communities, amateur astronomers, space enthusiasts, and the general public. It is also intended to encourage the world to experience the thrill of observing Earth’s closest neighbor. The inaugural InOMN took place on September 18, 2010. People in over 26 countries gathered together in groups big and small to learn about the Moon through presentations by scientists, astronomers, and engineers; participate in hands-on activities; and observe the Moon through telescopes, binoculars, and the naked eye. Next year’s InOMN will take place on October 8, 2011 during the Year of the Solar System (YSS). The October 2011 YSS theme will be “Moons/Rings Across the Solar System.” InOMN is perfectly suited as an event that any museum, science center, planetarium, university, school, or other group can implement to celebrate YSS. The InOMN Coordinating Committee has developed a variety of resources and materials to make it easy to host an InOMN event of any size. Interested groups are encouraged to utilize the InOMN website (observethemoonnight.org) in planning their InOMN event for 2011/YSS. The website contains links to Moon resources, educational activities, suggestions for hosting an event, free downloads of logos and flyers for advertising an event, and contests. New for 2011 will be a discussion forum for event hosts to share their plans, tips, and experiences. Together, YSS and InOMN will enable the public to maintain its curiosity about the Moon and to gain a better understanding of the Moon’s formation, evolution, and place in the night sky.

A case of late-onset oligomeganephronia

Directory of Open Access Journals (Sweden)

Rafael José Vargas Alves

2012-12-01

Full Text Available A 33-year old caucasian man was investigated for pain in the right flank, proteinuria, hemathuria and an elevated serum creatinine level. He also presented an abnormal ultrasonography, which revealed asymmetric kidneys. Through renal biopsy, the diagnosis of oligomeganephronia (OMN was confirmed. OMN is a very rare form of renal hypoplasia, and late-onset in adulthood is even rarer. In the pediatric population, OMN leads to end-stage-renal-failure(ESRF in a few years. This is the sixth case related in the literature of a late-onset OMN who have not yet developed ESRF.

World-Wide Outreach through International Observe the Moon Night

Science.gov (United States)

Buxner, S.; Jones, A. P.; Bleacher, L.; Shaner, A. J.; Day, B. H.; Wenger, M.; Joseph, E.; Canipe, M.

2016-12-01

International Observe the Moon Night (InOMN) is an annual worldwide public event that encourages observation, appreciation, and understanding of our Moon and its connection to NASA planetary science and exploration. Everyone on Earth is invited to join the celebration by hosting or attending an InOMN event - and uniting on one day each year to look at and learn about the Moon together. Events are hosted by a variety of institutions including astronomy clubs, observatories, schools, and universities, museums, planetaria, schools, universities, observatories, parks, private businesses and private homes. Events hosts are supported with event flyers, information sheets, Moon maps for observing, activities to use during events, presentations, certificates of participation, and evaluation materials to be used by hosts. 2016 is the seventh year of worldwide participation in InOMN which will be held on October 8th. In the last six years, over 3,000 events were registered worldwide from almost 100 different countries and almost all 50 states and the District of Columbia in the United States. Evaluation of InOMN is conducted by an external evaluation group and includes analysis of event registrations, facilitator surveys, and visitor surveys. Evaluation results demonstrate that InOMN events are successful in raising visitors' awareness of lunar science and exploration, providing audiences with information about lunar science and exploration, and inspiring visitors to want to learn more about the Moon. Additionally, preliminary analysis of social media has shown that there is a virtual network of individuals connecting about InOMN. A large fraction of events have been held by institutions for more than one year showing sustained interest in participation. During this presentation, we will present data for all seven years of InOMN including lessons learned through supporting and evaluating a worldwide event. InOMN is sponsored by NASA's Lunar Reconnaissance Orbiter, NASA

Quantum philosophy understanding and interpreting contemporary science

CERN Document Server

Omnès, Roland

2002-01-01

In this magisterial work, Roland Omnès takes us from the academies of ancient Greece to the laboratories of modern science as he seeks to do no less than rebuild the foundations of the philosophy of knowledge. One of the world's leading quantum physicists, Omnès reviews the history and recent development of mathematics, logic, and the physical sciences to show that current work in quantum theory offers new answers to questions that have puzzled philosophers for centuries: Is the world ultimately intelligible? Are all events caused? Do objects have definitive locations? Omnès addresses these p

Stress-intensity factors for cracks emanating from the loaded fastener hole

Science.gov (United States)

Shivakumar, V.; Hsu, Y. C.

1977-01-01

Using a series approach and the Muskhelishvili formulation in the two-dimensional theory of elasticity, stress-intensity factors K are derived for problems in which cracks emanate radially from the boundary of an arbitrarily loaded internal circular hole in an infinite plate. Numerical values are obtained for K(I) and K(II) for radial cracks from a hole containing a loose-fitted pin or rivet that is pulled perpendicular to the crack direction in the plane of the plate. The method is a general one for determining K for a set of symmetrically emanating radial cracks for a variety of concentrated or distributed tractions on the circular hole.

Reduced levels of potential circulating biomarkers of cardiovascular diseases in apparently healthy vegetarian men.

Science.gov (United States)

Navarro, Julio Acosta; de Gouveia, Luiza Antoniazzi; Rocha-Penha, Lilliam; Cinegaglia, Naiara; Belo, Vanessa; Castro, Michele Mazzaron de; Sandrim, Valeria Cristina

2016-10-01

Several evidences report that a vegetarian diet is protector against cardiovascular diseases. Few studies have demonstrated the circulating profile of cardiovascular biomarkers in vegetarians. Therefore, the aims of the current study were compared the plasma concentrations of myeloperoxidase (MPO), metalloproteinase (MMP)-9, MMP-2, tissue inhibitor of MMP (TIMP)-1 and TIMP-2 between healthy vegetarian (Veg) and healthy omnivorous (Omn). Using ELISA and multiplexed bead immunoassay, we measured in plasma from 43 Veg and 41 Omn the cardiovascular biomarkers concentrations cited above. We found significant lower concentrations of MPO, MMP-9, MMP-2 and MMP-9/TIMP-1 ratio in Veg compared to Omn (all Pvegetarian diet is associated with a healthier profile of cardiovascular biomarkers compared to omnivorous. Copyright © 2016 Elsevier B.V. All rights reserved.

The oxidation state of manganese in ferromanganese nodules and deep-sea sediments from the Central Indian Ocean

Digital Repository Service at National Institute of Oceanography (India)

Pattan, J.N.; Mudholkar, A.V.

nodule field (lO°S). Sotid Phase Mn (wf.%) O/Mn ratio Solid Phase Mn (wt?/o) O/Mn ratio S i6 1.7 1.8 1.9 2.,0 I~ 1.,S I~6 Ii7 I.,8 I.,9 I I I ._m..m I~ I = I 3o ~\\[ 36 I SK/20/226 5S/10/657 Fig. 4. Distribution of solid-phase Mn (wt.%) and O...

Towards a Theory OMN the Impact of School Inspections

Science.gov (United States)

Ehren, M. C. M.; Visscher, A. J.

2006-01-01

This article describes a theory about the ambition of most Inspectorates to realise "school improvement through inspection." Literature about a number of direct and indirect interventions, such as reciprocity, communication and feedback is used to build a theoretical model stating the relations between working methods of school inspectors,…

Analytical model of cracking due to rebar corrosion expansion in concrete considering the structure internal force

Science.gov (United States)

Lin, Xiangyue; Peng, Minli; Lei, Fengming; Tan, Jiangxian; Shi, Huacheng

2017-12-01

Based on the assumptions of uniform corrosion and linear elastic expansion, an analytical model of cracking due to rebar corrosion expansion in concrete was established, which is able to consider the structure internal force. And then, by means of the complex variable function theory and series expansion technology established by Muskhelishvili, the corresponding stress component functions of concrete around the reinforcement were obtained. Also, a comparative analysis was conducted between the numerical simulation model and present model in this paper. The results show that the calculation results of both methods were consistent with each other, and the numerical deviation was less than 10%, proving that the analytical model established in this paper is reliable.

Traffic Policing in Dynamic Military Networks Using Software Defined Networking

OpenAIRE

Skappel, Hans Fredrik

2016-01-01

This thesis looks at how Software Defined Networking (SDN) can be used to provide traffic engineering and to police traffic in an Operational Military Network (OMN). SDN is a concept where the control plane is separated from the forwarding plane, and the control plane is capable of controlling forwarding plane elements located on multiple network nodes using the OpenFlow protocol. Specifically, we have discussed the problems in OMNs, and possible SDN approaches to mitigate the challenges. Bas...

The influence of non-singular terms on the precision of stress description near a sharp material inclusion tip

Czech Academy of Sciences Publication Activity Database

Krepl, Ondřej; Klusák, Jan

2017-01-01

Roč. 90, AUG (2017), s. 85-99 ISSN 0167-8442 R&D Projects: GA MŠk(CZ) LQ1601; GA ČR(CZ) GA16-18702S Institutional support: RVO:68081723 Keywords : General singular stress concentrator * Generalized fracture mechanics * Muskhelishvili plane elasticity * Sharp material inclusion * Singular and non-singular stress terms Subject RIV: JL - Materials Fatigue, Friction Mechanics OBOR OECD: Audio engineering, reliability analysis Impact factor: 2.659, year: 2016

Evaluation of International Observe the Moon Night: Outcomes, Challenges, and Lessons Learned from Six Years of Data Collection

Science.gov (United States)

Buxner, S.; Wenger, M.; Joseph, E.; Jones, A. P.; Bleacher, L.; Shaner, A. J.; Day, B. H.

2015-12-01

Evaluation of large public STEM events poses many challenges including data collection of moving crowds, representative sampling, and collecting sufficient data with available resources. International Observe the Moon Night (InOMN) is a yearly event held around the world on a single day coordinated by the Lunar Reconnaissance Orbiter with support from partners around the globe. Each year hundreds of events are held across the United States and in over 50 countries across the world. This distributed event poses even more challenges in its evaluation due to the fact that events vary widely in their implementation and that it is impossible for evaluators to collect data at any more than a small fraction of the events. We present findings of six years of evaluation at InOMN events that implemented varying data collection techniques, incentives, and target outcomes as the event has evolved. Through analysis of these years of data, we have found that InOMN events are hosted by a variety of public and private institutions all over the world including museums, planetaria, schools, universities, observatories, parks, and private businesses and families, over half of which have hosted events for more than one year. Telescopes are present at a majority of the events and lunar science and exploration is often highlighted. Visitors who have been surveyed or interviewed often report being regular attendees at science related events but many were new to InOMN. Many of those surveyed report that they attended with friends and family making their participation a social event. Visitors also reported an increase in knowledge and excitement to learn more about the Moon as a result of their participation in an event. Overall, InOMN events have met both organizers and facilitators' goals. We will discuss the different data collection techniques, challenges encountered and overcome, and lessons learned through this ongoing evaluation effort.

A New Fast Vertical Method for Mining Frequent Patterns

Directory of Open Access Journals (Sweden)

Zhihong Deng

2010-12-01

Full Text Available Vertical mining methods are very effective for mining frequent patterns and usually outperform horizontal mining methods. However, the vertical methods become ineffective since the intersection time starts to be costly when the cardinality of tidset (tid-list or diffset is very large or there are a very large number of transactions. In this paper, we propose a novel vertical algorithm called PPV for fast frequent pattern discovery. PPV works based on a data structure called Node-lists, which is obtained from a coding prefix-tree called PPC-tree. The efficiency of PPV is achieved with three techniques. First, the Node-list is much more compact compared with previous proposed vertical structure (such as tid-lists or diffsets since transactions with common prefixes share the same nodes of the PPC-tree. Second, the counting of support is transformed into the intersection of Node-lists and the complexity of intersecting two Node-lists can be reduced to O(m+n by an efficient strategy, where m and n are the cardinalities of the two Node-lists respectively. Third, the ancestor-descendant relationship of two nodes, which is the basic step of intersecting Node-lists, can be very efficiently verified by Pre-Post codes of nodes. We experimentally compare our algorithm with FP-growth, and two prominent vertical algorithms (Eclat and dEclat on a number of databases. The experimental results show that PPV is an efficient algorithm that outperforms FP-growth, Eclat, and dEclat.

SIP protocol model for OMNET++

Directory of Open Access Journals (Sweden)

Jan Kucerak

2016-01-01

Full Text Available The article describes our new SIP protocol implementation for the OMNeT++ simulation framework. OMNeT++ simulation framework provides an extensive support of IP related protocols, nevertheless a working SIP protocol implementation is missing. Real measurements were also done using a SIPp traffic generator and the results are compared to those obtained by our new SIP model. Since this work is a part of bigger project concerned strictly on measuring "first response times" over networks with a faulty transmission links, the actually collected statistics are focused only this way.

Stress State of Elastic Thick-Walled Ring With Self-Balanced Pressures Distributed on Its Internal and External Borders

Directory of Open Access Journals (Sweden)

Kravchuk Aleksandr Stepanovich

2015-10-01

Full Text Available For the first time with the help of the theory of analytic functions and Kolosov-Muskhelishvili formulas the problem of the two-dimensional theory of elasticity for a thickwalled ring with the uneven pressures, acting on its borders, was solved. The pressure on the inner and outer boundaries is represented by Fourier series. The authors represent the two complex functions which solve boundary problem in the form of Laurent series. The logarithmic terms in these series are absent because the boundary problem has the self-balancing loads on each boundary of ring. The coefficients in the Laurent series are calculated by the boundary conditions. Firstly, the equations were obtained in the general form. But the hypothesis about even distributions of pressures at borders of ring was used for constructing an example. It leads to the fact that all coefficients of analytic functions represented in Laurent series have to be only real. As a solving example, the representation of pressures in equivalent hypotrochoids was used. The application of the computer algebra system Mathematica greatly simplifies the calculation of the distribution of stresses and displacements in ring. It does not require manual formal separation of real and imaginary parts in terms of Kolosov-Muskhelishvili to display the distribution of the physical parameters. It separates them only for calculated numbers with the help of built-in functions.

Imaging the ocular motor nerves

Energy Technology Data Exchange (ETDEWEB)

Ferreira, Teresa [Department of Radiology, Leiden University Medical Center (Netherlands)], E-mail: T.A.Ferreira@lumc.nl; Verbist, Berit [Department of Radiology, Leiden University Medical Center (Netherlands)], E-mail: B.M.Verbist@lumc.nl; Buchem, Mark van [Department of Radiology, Leiden University Medical Center (Netherlands)], E-mail: M.A.van_Buchem@lumc.nl; Osch, Thijs van [C.J. Gorter for High-Field MRI, Department of Radiology, Leiden University Medical Center (Netherlands)], E-mail: M.J.P.van_Osch@lumc.nl; Webb, Andrew [C.J. Gorter for High-Field MRI, Department of Radiology, Leiden University Medical Center (Netherlands)], E-mail: A.Webb@lumc.nl

2010-05-15

The ocular motor nerves (OMNs) comprise the oculomotor, trochlear and the abducens nerves. According to their course, they are divided into four or five anatomic segments: intra-axial, cisternal, cavernous and intra-orbital and, for the abducens nerve, an additional interdural segment. Magnetic resonance imaging is the imaging method of choice in the evaluation of the normal and pathologic ocular motor nerves. CT still plays a limited but important role in the evaluation of the intraosseous portions at the skull base and bony foramina. We describe for each segment of these cranial nerves, the normal anatomy, the most appropriate image sequences and planes, their imaging appearance and pathologic conditions. Magnetic resonance imaging with high magnetic fields is a developing and promising technique. We describe our initial experience with a Phillips 7.0 T MRI scanner in the evaluation of the brainstem segments of the OMNs. As imaging becomes more refined, an understanding of the detailed anatomy is increasingly necessary, as the demand on radiology to diagnose smaller lesions also increases.

Canite tuba, præparentur omnes

Directory of Open Access Journals (Sweden)

Gimeno Blay, Francisco M.

2005-12-01

Full Text Available The present paper focusses on the various uses of blass instruments at different historical periods. It not only centers on its musical use, but on its communicative function as well, since this type of instruments has often been employed to reach far distant subjects. Evidence for our conclusions has been supplied both by western literary texts and by iconographic representations belonging to different periods of time.El objetivo de este estudio es el de valorar la intervención de los instrumentos de la familia viento-metal en diversas situaciones históricas. Superar la simultaneidad y alcanzar interlocutores distantes ha requerido el empleo de artefactos que prolongan la voz humana. Utilizando como fuentes de estudio las representaciones proporcionadas por la literatura y la iconografía de la cultura occidental, pueden valorarse, históricamente, los ambientes y contextos en los que se recurrió a los instrumentos aerófonos con fines comunicativos y musicales.

The Moon's Moment in the Sun - Extending Public Engagement after the Total Solar Eclipse with International Observe the Moon Night

Science.gov (United States)

Bleacher, L.; Jones, A. P.; Wasser, M. L.; Petro, N. E.; Wright, E. T.; Ladd, D.; Keller, J. W.

2017-12-01

2017 presented an amazing opportunity to engage the public in learning about lunar and space science, the motions of the Earth-Moon-Sun system, and NASA's fleet of space missions, beginning with the 2017 total solar eclipse on 21 August and continuing with International Observe the Moon Night (InOMN) on 28 October. On 21 August 2017, everyone in the continental United States had the opportunity to witness a solar eclipse, weather permitting, in total or partial form. The path of totality, in which the Sun was completely obscured from view by the Moon, stretched from Oregon to South Carolina. The Education and Communication Team of NASA's Lunar Reconnaissance Orbiter (LRO) worked to highlight the Moon, the "central player" in the total solar eclipse, in a variety of ways for the public. Efforts included collaborating with Minor League Baseball teams to host eclipse-viewing events along the path of totality, communicating the Moon's role in the eclipse through public engagement products, communicating about InOMN as an experiential opportunity beyond the eclipse, and more. InOMN is an annual event, during which everyone on Earth is invited to observe and learn about the Moon and its connection to planetary science, and to share personal and community connections we all have to the Moon [2, 3, 4 and references therein]. For viewers across the United States, the total solar eclipse of 21 August provided an exciting opportunity to watch a New Moon cross in front of the Sun, casting the viewer in shadow and providing amazing views of the solar corona. The public observed the Moon in a different part of its orbit, when reflected sunlight revealed a fascinating lunar landscape - and extended their excitement for space science - by participating in InOMN on 28 October. With InOMN taking place barely two months after the total solar eclipse, it offered an opportunity to sustain and grow public interest in lunar and space science generated by the eclipse. We will report on

Reduced subclinical carotid vascular disease and arterial stiffness in vegetarian men: The CARVOS Study.

Science.gov (United States)

Acosta-Navarro, Julio; Antoniazzi, Luiza; Oki, Adriana Midori; Bonfim, Maria Carlos; Hong, Valeria; Acosta-Cardenas, Pedro; Strunz, Celia; Brunoro, Eleonora; Miname, Marcio Hiroshi; Filho, Wilson Salgado; Bortolotto, Luiz Aparecido; Santos, Raul D

2017-03-01

Dietary habits play an important role in the development of atherosclerosis, the most important cause of morbidity and mortality in the world. The objective of this study was to verify if vegetarian (VEG) diet could be related a better profile of subclinical vascular disease evaluated by arterial stiffness and functional and structural properties of carotid arteries, compared to omnivorous (OMN) diet. In this cross-sectional study, 44 VEG and 44 OMN apparently healthy men ≥35years of age, in order to not have confounding risk factors of subclinical atherosclerosis, were assessed for anthropometric data, blood pressure, blood lipids, glucose, C reactive protein (CRP), and arterial stiffness determined by carotid-femoral pulse wave velocity (PWV). Also, carotid intima-media thickness (c-IMT) and distensibility were evaluated. VEG men had lower body mass index, systolic and diastolic blood pressures, fasting serum total cholesterol, LDL and non-HDL-cholesterol, apolipoprotein B, glucose and glycated hemoglobin values in comparison with OMN individuals (all p values <0.05). Markers of vascular structure and function were different between VEG and OMN: PWV 7.1±0.8m/s vs. 7.7±0.9m/s (p<0.001); c-IMT 593±94 vs. 661±128μm (p=0.003); and relative carotid distensibility 6.39±1.7 vs. 5.72±1.8% (p=0.042), respectively. After a multivariate linear regression analysis, a VEG diet was independently and negatively associated with PWV (p value 0.005). A VEG diet is associated with a more favorable cardiovascular diseases biomarker profile and better vascular structural and functional parameters. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Game Theoretic Analysis of Cooperative Message Forwarding in Opportunistic Mobile Networks.

Science.gov (United States)

Pal, Sujata; Saha, Barun Kumar; Misra, Sudip

2017-12-01

In cooperative communication, a set of players forming a coalition ensures communal behavior among themselves by helping one another in message forwarding. Opportunistic mobile networks (OMNs) require multihop communications for transferring messages from the source to the destination nodes. However, noncooperative nodes only forward their own messages to others, and drop others' messages upon receiving them. So, the message delivery overhead increases in OMN. For minimizing the overhead and maximizing the delivery rate, we propose two coalition-based cooperative schemes: 1) simple coalition formation (SCF) and 2) overlapping coalition formation (OCF) game. In SCF, we consider the presence of a central information center, whereas OCF is a fully distributed scheme. In SCF, coalitions are disjoint, whereas in OCF, a node may be the member of multiple coalitions at the same time. All nodes in a coalition help each other cooperatively by forwarding group messages to the intermediate or destination nodes. The goal of the nodes is to achieve high success rate in delivering messages. The proposed SCF scheme is cohesive, in which disjoint coalitions always combine to form grand coalition. In OCF, a node reaches a stable grand coalition when all the nodes of the OMN are members of overlapping coalition of the node. No node gains by deviating from the grand coalition in SCF and OCF. Simulation results based on synthetic mobility model and real-life traces show that the message delivery ratio of OMNs increase by up to 67%, as compared to the noncooperative scenario. Moreover, the message overhead ratio using the proposed coalition-based schemes reduces by up to about (1/3)rd of that of the noncooperative communication scheme.

OMNeT++ BENZETİM ARACI KULLANILARAK MOBİL IPV6 KATMAN-2 HÜCRE GEÇİŞİ BAŞARIMININ ANALİZİ

Directory of Open Access Journals (Sweden)

Gürcan ÇETİN

2015-04-01

Full Text Available Bir Mobil Düğüm (Mobile Node - MN aktif iletişimi sürdürürken pürüzsüz bir hücre geçişi sağlamak Mobil IP sürüm 6 (MIPv6 için en önemli etkenlerden birisidir. Pürüzsüz bir hücre geçişi, MIPv6 protokolünde açıkça tanımlanan hareketliliğin tespit edilmesi, yeni bir adresin yapılandırılması ve bağlama güncellemesi işlemleri sırasındaki gecikme sürelerinin azaltılması ya da sonlandırılması ile gerçekleştirilebilir. Ancak, MIPv6 hücre geçişi süreci Katman2 (Layer2- L2 ve Katman-3 (Layer 3 – L3 işlemleri nedeniyle oldukça karmaşıktır ve bu dezavantaj özellikle makro hareketlilikte ve gerçek zamanlı iletişimde performansta önemli derecede azalmaya neden olur. L3 hücre geçişi MIPv6 hücre geçişinin en önemli faktörüdür çünkü toplam hücre geçişi gecikmesinin büyük bir bölümü bu aşamada meydana gelir. Diğer taraftan, L2 hücre geçişişi L3 hücre geçişine göre çok daha az kayıp ile sonuçlanır. Ancak, L2 hücre geçişi üzerine yapılan çalışmalar da literatürde önemli yer tutmaktadır. Çünkü L2 hücre geçişi sırasında gerçekleşen olaylar L3 hücre geçişini önceden tetikleyebilmektedir. Bu sayede, pürüzsüz hücre geçişi teknikleri bu şekilde gerçekleştirilmektedir. L2 yaklaşımı L3 tabanlı çözümlere göre çok daha hızlıdır. Buna rağmen bu yöntemlerde L2 hücre geçişi gecikmesi kadar sınırlıdırlar. Bu makalede, biz MIPv6 hücre geçişindeki L2 gecikmelerini OMNeT++ benzetim ortamını kullanarak analiz ettik. Bu analizler, L2 hücre geçişi gecikmelerinin bileşenlerini ayrı ayrı gösterecektir

PENERAPAN ASAS PACTA TERTIIS NEC NOCENT NEC PROSUNT BERKAITAN DENGAN STATUS HUKUM DAERAH DASAR LAUT SAMUDERA DALAM (SEA BED

Directory of Open Access Journals (Sweden)

Aryuni Yuliatiningsih

2010-01-01

Full Text Available International ocean seabed area out of national jurisdiction recognized as a common heritage of mankind. Its regulations under International authority based on UNCLOS 1982. UNCLOS 1982 didn’t universal acceptance because there are several states unwilling consent to be bound by a treaty. In the law of treaty there is pacta tertiis nec nocent nec prosunt principle, means a treaty does not either obligations or rights for a third State without its consent. Nevertheless, rules in a treaty becoming binding upon on third states through international custom and there is a principle has character erga omnes Key Words: pacta tertiis nec nocent nec prosunt principle, legal status, ocean seabed, erga omnes

Contribution to the analytical and numerical evaluation of oil well equilibrium for any cross section under a uniform pressure and an anisotropic stress field

Energy Technology Data Exchange (ETDEWEB)

Bouziane, A.

1989-09-01

The integral equation, the finite element and an analytical method are used and compared to compute the state of equilibrium of an oil well. This well is of whatever cross section and is subjected to a uniform pressure and an anisotropic stress field at the infinity. In the first part, the equations of the Mechanics of deformable solids are recalled using dual vectorial spaces theory. These equations are briefly introduced by using a four spaces diagram. In the second part, an analytical method using the complex potentials developed by Muskhelishvili is used to solve the problem. In the third part, three methods of integral equations are developed (direct and indirect). The stress boundary conditions at infinity are taken into account by superimposing a particular solution to the fundamental solution. With such a method, both displacements and stresses are correctly represented as well on the boundary as inside the domain. The finite element method is developed in the fourth part. For complicate shapes of well cross section the used automatic mesh generator does not seem well adapted. In conclusion, the integral equation method gives the results which are in the best agreement with the analytical solutions.

Cardiorespiratory Fitness and Peak Torque Differences between Vegetarian and Omnivore Endurance Athletes: A Cross-Sectional Study.

Science.gov (United States)

Lynch, Heidi M; Wharton, Christopher M; Johnston, Carol S

2016-11-15

In spite of well-documented health benefits of vegetarian diets, less is known regarding the effects of these diets on athletic performance. In this cross-sectional study, we compared elite vegetarian and omnivore adult endurance athletes for maximal oxygen uptake (VO2 max) and strength. Twenty-seven vegetarian (VEG) and 43 omnivore (OMN) athletes were evaluated using VO2 max testing on the treadmill, and strength assessment using a dynamometer to determine peak torque for leg extensions. Dietary data were assessed using detailed seven-day food logs. Although total protein intake was lower among vegetarians in comparison to omnivores, protein intake as a function of body mass did not differ by group (1.2 ± 0.3 and 1.4 ± 0.5 g/kg body mass for VEG and OMN respectively, p = 0.220). VO2 max differed for females by diet group (53.0 ± 6.9 and 47.1 ± 8.6 mL/kg/min for VEG and OMN respectively, p vegetarian endurance athletes' cardiorespiratory fitness was greater than that for their omnivorous counterparts, but that peak torque did not differ between diet groups. These data suggest that vegetarian diets do not compromise performance outcomes and may facilitate aerobic capacity in athletes.

Inverse scattering solution of the Chew-Low equation

International Nuclear Information System (INIS)

Nakano, K.

1985-01-01

Techniques for solving the inverse scattering problem are applied to the Chew-Low equation to obtain the nucleon form factor directly from the experimental phase shifts. A new dispersion relation is derived for the P 11 wave because of its sign-changing phase shift. A self-consistent solution for each channel is obtained, but the universality of form factor is not confirmed. Also, an iterative procedure based on Omnes' method is developed in order to solve coupled-channel, singular integral equations. (orig.)

Performance evaluation by simulation and analysis with applications to computer networks

CERN Document Server

Chen, Ken

2015-01-01

This book is devoted to the most used methodologies for performance evaluation: simulation using specialized software and mathematical modeling. An important part is dedicated to the simulation, particularly in its theoretical framework and the precautions to be taken in the implementation of the experimental procedure.  These principles are illustrated by concrete examples achieved through operational simulation languages ​​(OMNeT ++, OPNET). Presented under the complementary approach, the mathematical method is essential for the simulation. Both methodologies based largely on the theory of

Simulation of the Application Layer in NarrowBand Networks with Conditional Data Injection XML Scheme Based on Universal Data Generator

Directory of Open Access Journals (Sweden)

Ondrej Vondrous

2017-01-01

Full Text Available In this article, we would like to deal with challenges and analysis approaches in the area of narrow band communication networks. Especially those networks which use TCP/IP protocol family. We also present a new universal data generator for OMNeT++ simulation environment. We created this generator to satisfy the evaluation, stress testing and benchmarking demands of more and more complex industrial and the Internet of Things networks. We also present the methods for evaluation and comparison of results obtained from simulated and real TCP/IP based networks in this article.

Cardiorespiratory Fitness and Peak Torque Differences between Vegetarian and Omnivore Endurance Athletes: A Cross-Sectional Study

Directory of Open Access Journals (Sweden)

Heidi M. Lynch

2016-11-01

Full Text Available In spite of well-documented health benefits of vegetarian diets, less is known regarding the effects of these diets on athletic performance. In this cross-sectional study, we compared elite vegetarian and omnivore adult endurance athletes for maximal oxygen uptake (VO2 max and strength. Twenty-seven vegetarian (VEG and 43 omnivore (OMN athletes were evaluated using VO2 max testing on the treadmill, and strength assessment using a dynamometer to determine peak torque for leg extensions. Dietary data were assessed using detailed seven-day food logs. Although total protein intake was lower among vegetarians in comparison to omnivores, protein intake as a function of body mass did not differ by group (1.2 ± 0.3 and 1.4 ± 0.5 g/kg body mass for VEG and OMN respectively, p = 0.220. VO2 max differed for females by diet group (53.0 ± 6.9 and 47.1 ± 8.6 mL/kg/min for VEG and OMN respectively, p < 0.05 but not for males (62.6 ± 15.4 and 55.7 ± 8.4 mL/kg/min respectively. Peak torque did not differ significantly between diet groups. Results from this study indicate that vegetarian endurance athletes’ cardiorespiratory fitness was greater than that for their omnivorous counterparts, but that peak torque did not differ between diet groups. These data suggest that vegetarian diets do not compromise performance outcomes and may facilitate aerobic capacity in athletes.

Description d’un genre nouveau de la famille des Clérides

NARCIS (Netherlands)

Fairmaire, L.

1887-01-01

Tarsi quadriarticulati. Prothorax haud marginatus, lateribus cum pleuris confusis. Oculi antice emarginati, subtiliter granulati. Antennæ breves, ab articulo 5° late serratae, articulo 4° brevissimo, ultimo emarginato, apice sat acuto. Palpi omnes articulo ultimo elongato, acuto. Elytra apice

Imaging the ocular motor nerves.

NARCIS (Netherlands)

Ferreira, T.; Verbist, B.M.; Buchem, M. van; Osch, T. van; Webb, A.

2010-01-01

The ocular motor nerves (OMNs) comprise the oculomotor, trochlear and the abducens nerves. According to their course, they are divided into four or five anatomic segments: intra-axial, cisternal, cavernous and intra-orbital and, for the abducens nerve, an additional interdural segment. Magnetic

An evaluation of Kenya's parallel legal regime on refugees, and the ...

African Journals Online (AJOL)

HP27975994114

Nigeria.7 The cumulative effect of the dismissal of this petition showed the application ... the author is not aware of any decision that has applied erga omnes in the ..... 72 “Asylum under threat; assessing the protection of Somali refugees in ...

A Novel Cloud-Based Platform for Implementation of Oblivious Power Routing for Clusters of Microgrids

DEFF Research Database (Denmark)

Broojeni, Kianoosh; Amini, M. Hadi; Nejadpak, Arash

2016-01-01

is verified by MATLAB simulation. We also present a comprehensive cloud-based platform for further implementation of the proposed algorithm on the OPAL-RT real-time digital simulation system. The communication paths between the microgrids and the cloud environment can be emulated by OMNeT++....

Which matrices are immune against the transportation paradox

NARCIS (Netherlands)

Deineko, Vladimir G.; Klinz, Bettina; Woeginger, Gerhard

2003-01-01

We characterize the m×n cost matrices of the transportation problem for which there exist supplies and demands such that the transportation paradox arises. Our characterization is fairly simple and can be verified within O(mn) computational steps. Moreover, we discuss the corresponding question for

Kaizen implementation: A best case analysis

NARCIS (Netherlands)

Yokozawa, Kodo; Steenhuis, H.J.

2011-01-01

This study add insights to the concept on kaizen and its implementation process based upon an in-depth case study at OMN, a Japanese manufacturer in the Netherlands which has successfully adopted kaizen concepts. It was found that employee discipline and personal-initiatives are the two critical

The Role of Antimatter in Big-Bang Cosmology

Science.gov (United States)

Stecker, Floyd W.

1974-01-01

Discusses theories underlying man's conceptions of the universe, including Omnes' repulsive separation mechanism, the turbulence theory of galaxy formation, and the author's idea about gamma ray spectra in cosmological matter-antimatter annihilation. Indicates that the Apollo data provide encouraging evidence by fitting well with his theoretical…

On the consistent histories approach to quantum mechanics

International Nuclear Information System (INIS)

Dowker, F.; Kent, A.

1996-01-01

We review the consistent histories formulations of quantum mechanics developed by Griffiths, Omnes, Gell-Man, and Hartle, and we describe the classifications of consistent sets. We illustrate some general features of consistent sets by a few lemmas and examples. We also consider various interpretations of the formalism, and we examine the new problems which arise in reconstructing the past and predicting the future. It is shown that Omnes characterization of true statements---statements that can be deduced unconditionally in his interpretation---is incorrect. We examine critically Gell-Mann and Hartle's interpretation of the formalism, and in particular, their discussions of communication, prediction, and retrodiction, and we conclude that their explanation of the apparent persistence of quasiclassicality relies on assumptions about an as-yet-unknown theory of experience. Our overall conclusion is that the consistent histories approach illustrates the need to supplement quantum mechanics by some selection principle in order to produce a fundamental theory capable of unconditional predictions

Probing quark mass effects in low-energy hadron physics

International Nuclear Information System (INIS)

Ditsche, Christoph

2012-01-01

formalism and a solution strategy for a precision determination of the leading partial waves of the πN scattering amplitude in the low-energy region. They are specifically important to constrain the pion-nucleon σ-term, which measures the light-quark contributions to the nucleon mass and is still a subject of discussion. Starting from hyperbolic dispersion relations, we derive a closed system of Roy-Steiner equations that respects analyticity, unitarity, and especially crossing symmetry. Assuming Mandelstam analyticity, we determine the maximal kinematical ranges of validity of the equations for both the scattering process and the crossed annihilation process ππ→ anti NN. To suppress the dependence on the high-energy region, we also introduce subtractions into the Roy-Steiner system, identifying the subtraction constants with πN subthreshold parameters. The S- and P-waves of the crossed process feature prominently in dispersive analyses of the scalar nucleon form factor that is directly linked to the σ-term and the electromagnetic nucleon form factors, respectively. As a first step towards solving the full Roy-Steiner system, we study the solution of these partial waves by using Muskhelishvili-Omnes techniques. Due to the conceptual and methodological differences, both parts are presented in a self-contained fashion.

Some aspects of symmetrical relativistic cosmology

International Nuclear Information System (INIS)

Goto, M.

1977-01-01

A qualitative study of the cosmological model of Omnes is presented, as well as some numerical results. Studies are made in a chronological or historical way involving several subjects like matter and anti-matter emulsions, density of galactic clusters, the annihilation problem, quasars, etc. One solution for the matter diffusion equation is presented

APMO: UN PROGRAMA COMPUTACIONAL PARA EL ESTUDIO DE EFECTOS CUÁNTICOS NUCLEARES MEDIANTE LA TEORÍA DEL ORBITAL MOLECULAR ELECTRÓNICO Y NO ELECTRÓNICO.

Directory of Open Access Journals (Sweden)

Sergio González

2009-04-01

Full Text Available Con el fin de estudiar teóricamente fenómenos en donde los núcleos atómicos presentan comportamiento cuántico, hemos desarrollado el paquete computacional APMO (Any-Particle Molecular Orbital. Este implementa el método de orbitales moleculares nucleares y electrónicos (OMNE a un nivel de teoría Hartree-Fock (HF, en el que tanto núcleos como electrones se representan como funciones de onda.Para comprobar la correcta implementación del método, se realizaron  cálculos de estructura electrónica regular y núcleo-electrónica de las moléculas H2 y LiH. Las componentes de energía calculadas siguen las  tendencias y están en el mismo orden de magnitud de cálculos similares reportados en la literatura.A diferencia de otros paquetes que implementan el método OMNE, el nuestro fué diseñado para estudiar sistemas con cualquier número de especies cuánticas. 

Exact method for numerically analyzing a model of local denaturation in superhelically stressed DNA

International Nuclear Information System (INIS)

Fye, R.M.; Benham, C.J.

1999-01-01

Local denaturation, the separation at specific sites of the two strands comprising the DNA double helix, is one of the most fundamental processes in biology, required to allow the base sequence to be read both in DNA transcription and in replication. In living organisms this process can be mediated by enzymes which regulate the amount of superhelical stress imposed on the DNA. We present a numerically exact technique for analyzing a model of denaturation in superhelically stressed DNA. This approach is capable of predicting the locations and extents of transition in circular superhelical DNA molecules of kilobase lengths and specified base pair sequences. It can also be used for closed loops of DNA which are typically found in vivo to be kilobases long. The analytic method consists of an integration over the DNA twist degrees of freedom followed by the introduction of auxiliary variables to decouple the remaining degrees of freedom, which allows the use of the transfer matrix method. The algorithm implementing our technique requires O(N 2 ) operations and O(N) memory to analyze a DNA domain containing N base pairs. However, to analyze kilobase length DNA molecules it must be implemented in high precision floating point arithmetic. An accelerated algorithm is constructed by imposing an upper bound M on the number of base pairs that can simultaneously denature in a state. This accelerated algorithm requires O(MN) operations, and has an analytically bounded error. Sample calculations show that it achieves high accuracy (greater than 15 decimal digits) with relatively small values of M (M<0.05N) for kilobase length molecules under physiologically relevant conditions. Calculations are performed on the superhelical pBR322 DNA sequence to test the accuracy of the method. With no free parameters in the model, the locations and extents of local denaturation predicted by this analysis are in quantitatively precise agreement with in vitro experimental measurements

A summary view of the symmetric cosmological model

International Nuclear Information System (INIS)

Aldrovandi, R.

1975-01-01

A brief analysis of cosmological models is done, beginning with the standard model and following with the symmetric model of Omnes. Some attempts have been made for the phase transition in thermal radiation at high temperatures, to the annihilation period and to coalescence. One model with equal amounts of matter and antimatter seems to be reasonable [pt

An efficient non-dominated sorting method for evolutionary algorithms.

Science.gov (United States)

Fang, Hongbing; Wang, Qian; Tu, Yi-Cheng; Horstemeyer, Mark F

2008-01-01

We present a new non-dominated sorting algorithm to generate the non-dominated fronts in multi-objective optimization with evolutionary algorithms, particularly the NSGA-II. The non-dominated sorting algorithm used by NSGA-II has a time complexity of O(MN(2)) in generating non-dominated fronts in one generation (iteration) for a population size N and M objective functions. Since generating non-dominated fronts takes the majority of total computational time (excluding the cost of fitness evaluations) of NSGA-II, making this algorithm faster will significantly improve the overall efficiency of NSGA-II and other genetic algorithms using non-dominated sorting. The new non-dominated sorting algorithm proposed in this study reduces the number of redundant comparisons existing in the algorithm of NSGA-II by recording the dominance information among solutions from their first comparisons. By utilizing a new data structure called the dominance tree and the divide-and-conquer mechanism, the new algorithm is faster than NSGA-II for different numbers of objective functions. Although the number of solution comparisons by the proposed algorithm is close to that of NSGA-II when the number of objectives becomes large, the total computational time shows that the proposed algorithm still has better efficiency because of the adoption of the dominance tree structure and the divide-and-conquer mechanism.

Novel Approach to Design Ultra Wideband Microwave Amplifiers: Normalized Gain Function Method

Directory of Open Access Journals (Sweden)

R. Kopru

2013-09-01

Full Text Available In this work, we propose a novel approach called as “Normalized Gain Function (NGF method” to design low/medium power single stage ultra wide band microwave amplifiers based on linear S parameters of the active device. Normalized Gain Function TNGF is defined as the ratio of T and |S21|^2, desired shape or frequency response of the gain function of the amplifier to be designed and the shape of the transistor forward gain function, respectively. Synthesis of input/output matching networks (IMN/OMN of the amplifier requires mathematically generated target gain functions to be tracked in two different nonlinear optimization processes. In this manner, NGF not only facilitates a mathematical base to share the amplifier gain function into such two distinct target gain functions, but also allows their precise computation in terms of TNGF=T/|S21|^2 at the very beginning of the design. The particular amplifier presented as the design example operates over 800-5200 MHz to target GSM, UMTS, Wi-Fi and WiMAX applications. An SRFT (Simplified Real Frequency Technique based design example supported by simulations in MWO (MicroWave Office from AWR Corporation is given using a 1400mW pHEMT transistor, TGF2021-01 from TriQuint Semiconductor.

Vegans report less stress and anxiety than omnivores.

Science.gov (United States)

Beezhold, Bonnie; Radnitz, Cynthia; Rinne, Amy; DiMatteo, Julie

2015-10-01

Studies investigating mood in vegetarian diets have yielded conflicting results, either demonstrating risk for mental disorders or mood protection. Our objective was to investigate mood, as well as factors that potentially impact mood in vegans (VG), vegetarians (VEG), and omnivores (OMN). We surveyed mood, diet, and lifestyle factors in a broad geographic online sample of adult VG (n = 283), VEG (n = 109), and OMN (n = 228) who were recruited via diet-related social networks. Mood was measured with the Depression Anxiety Stress Scale-21 (DASS-21). The sample was mostly female (78.5%), and age was inversely correlated with all DASS scores (p vegan diet and daily fruit and vegetable intake. Mean stress scores were different in females only (F(2,476) = 3.82, p = 0.023, η(p)(2) = 0.016) and lower stress in females was related to a vegan diet and lower daily intake of sweets. A strict plant-based diet does not appear to negatively impact mood, in fact, reduction of animal food intake may have mood benefits. The improved mood domains were not consistent with those found in other studies, which may be due to methodological differences.

Estructura trófica de la asociación de peces intermareales de la costa rocosa del norte de Chile

Directory of Open Access Journals (Sweden)

C. Viviana Berrios

2004-03-01

Full Text Available Se analizaron las interacciones tróficas de 13 especies de peces intermareales, recolectadas en la región norte de Chile (20°18’S y 20°54’S durante el período julio 1997 a julio 1998, a partir del contenido estomacal de 820 especímenes. La importancia de los ítemes presa, fue valorada a través de los métodos de frecuencia de aparición y gravimétrico y los índices de Shannon-Wiener (diversidad trófica y Pianka (sobreposición trófica. Los resultados permitieron reconocer una asociación íctica compuesta por 46% de especies carnívoras, consumidoras principalmente de crustáceos porcelánidos, poliquetos y crustáceos menores, 23% de especies herbívoras, consumidoras mayoritariamente de algas clorófitas, feófitas y cianófitas y 31% de especies omnívoras, consumidoras principalmente de algas clorófitas, copépodos y gastrópodos. Los peces carnívoros Cheilodactylus variegatus, Helcogrammoides chilensis y Labrisomus philippii y el omnívoro Oplegnatus insignis registraron una tendencia a la eurifágia (H >2.0 bits, sin embargo la mayor superposicion trófica (>0.90 se observó entre los peces herbívoros y omnívoros. Finalmente se analizó el incremento de especies ícticas hacia latitudes bajas, y el aumento de los niveles de herbivoría y omnivoría en el intermareal rocosoThe trophic relationships of 13 intertidal fish species collected in northern Chile (20°18’S and 20°54’S from July 1997 to July 1998, the stomach content analysis of 820 specimens, were investigated. The importance of the prey items was assessed by means of gravimetric and frequency of ocurrence methods, together with the Shannon-Wiener (trophic diversity and Pianka (trophic overlap indexes. The results allowed to recognize a fish assemblage composed of: 46% of carnivorous species, preying mainly on porcelain crabs, polichaetes and minor crustaceans; 23% of herviborous species, preying mainly on chlorophitic algae; 31% of omnivorous species

Utilities Cost Comparison Analysis between a Public Work Center and the Non-DoD Sector

Science.gov (United States)

1992-12-01

construction, consider innovative financing and 14 management arrangements (e.g. cost-sharing, public-private venture, leasing). Integrate...and services by financing all incurred costs. 27 Cash is put back into the working capital fund when customers pay cash from their O&M,N funds for the...firms, and other significantly sized business firms. The actual participants of the study may or may not be included in this listing. Disneyland was

Defending IEEE 802.11-Based Networks Against Denial Of Service Attacks

National Research Council Canada - National Science Library

Tan, Boon

2003-01-01

...) attacks targeting its management and media access protocols Computer simulation models have proven to be effective tools in the study of cause and effect in numerous fields This thesis involved the design and implementation of a IEEE 8O2.11-based simulation model using OMNeT++, to investigate the effects of different types of DoS attacks on a IEEE 8O2.11 network, and the effectiveness of corresponding countermeasures.

Evaluation of CACC string stability using SUMO, Simulink and OMNeT++

NARCIS (Netherlands)

Lei, C.; Eenennaam, van E. M.; Klein Wolterink, W.; Ploeg, J.; Karagiannis, G.; Heijenk, G.J.

2012-01-01

Recent development in wireless technology enables communication between vehicles. The concept of cooperative adaptive cruise control (CACC)–which uses wireless communication between vehicles–aims at string stable behavior in a platoon of vehicles. "String stability" means any non-zero position,

Evaluation of CACC String Stability using SUMO, Simulink, and OMNeT++

NARCIS (Netherlands)

Lei, Chenxi; van Eenennaam, Martijn; Klein Wolterink, W.; Ploeg, Jeroen; Karagiannis, Georgios; Heijenk, Geert

2012-01-01

Recent development in wireless technology enables communication between vehicles. The concept of Co-operative Adaptive Cruise Control (CACC) - which uses wireless communication between vehicles - aims at string stable behaviour in a platoon of vehicles. “String stability‿ means any non-zero

Stress-deformed state of cylindrical specimens during indirect tensile strength testing

Directory of Open Access Journals (Sweden)

Levan Japaridze

2015-10-01

Full Text Available In this study, the interaction between cylindrical specimen made of homogeneous, isotropic, and linearly elastic material and loading jaws of any curvature is considered in the Brazilian test. It is assumed that the specimen is diametrically compressed by elliptic normal contact stresses. The frictional contact stresses between the specimen and platens are neglected. The analytical solution starts from the contact problem of the loading jaws of any curvature and cylindrical specimen. The contact width, corresponding loading angle (2θ0, and elliptical stresses obtained through solution of the contact problems are used as boundary conditions for a cylindrical specimen. The problem of the theory of elasticity for a cylinder is solved using Muskhelishvili's method. In this method, the displacements and stresses are represented in terms of two analytical functions of a complex variable. In the main approaches, the nonlinear interaction between the loading bearing blocks and the specimen as well as the curvature of their surfaces and the elastic parameters of their materials are taken into account. Numerical examples are solved using MATLAB to demonstrate the influence of deformability, curvature of the specimen and platens on the distribution of the normal contact stresses as well as on the tensile and compressive stresses acting across the loaded diameter. Derived equations also allow calculating the modulus of elasticity, total deformation modulus and creep parameters of the specimen material based on the experimental data of radial contraction of the specimen.

Decoherence in quantum mechanics and quantum cosmology

Science.gov (United States)

Hartle, James B.

1992-01-01

A sketch of the quantum mechanics for closed systems adequate for cosmology is presented. This framework is an extension and clarification of that of Everett and builds on several aspects of the post-Everett development. It especially builds on the work of Zeh, Zurek, Joos and Zeh, and others on the interactions of quantum systems with the larger universe and on the ideas of Griffiths, Omnes, and others on the requirements for consistent probabilities of histories.

Towards a better understanding and behavior recognition of inhabitants in smart cities. A public transport case

OpenAIRE

Klimek, Radoslaw; Kotulski, Leszek

2015-01-01

The idea of modern urban systems and smart cities requires monitoring and careful analysis of different signals. Such signals can originate from different sources and one of the most promising is the BTS, i.e. base transceiver station, an element of mobile carrier networks. This paper presents the fundamental problems of elicitation, classification and understanding of such signals so as to develop context-aware and pro-active systems in urban areas. These systems are characterized by the omn...

MAGNETIC INVESTIGATION OF AN UNUSUAL DISSYMMETRIC BINUCLEAR MANGANESE CARBOXYLATE COMPLEX

Directory of Open Access Journals (Sweden)

Ghenadie Novitchi

2006-06-01

Full Text Available The magnetic susceptibility (χT of an unusual dissymmetric binuclear manganese corboxylate complex has been measured from 2 to 300K. The magnetic data which have been fitted with help of the Heisenberg Dirac Van Vleck HDVV spin-exchange Hamiltonian H = − J S 1 S 2 , indicate that an antiferromagnetic interaction equal to J = -0.90(1 cm-1 is present. A correlation between J values and Mn-H2O-Mn angles has been tempted.

Optical 3-Way Handshake (O3WHS) Protocol Simulation in OMNeT++

Science.gov (United States)

2017-06-01

of manufacturer’s or trade names does not constitute an official endorsement or approval of the use thereof. Destroy this report when it is no...met the expectations. This approach can be used for existing and planned Department of Defense optical networks based on new paradigms like

Efficient convolutional sparse coding

Science.gov (United States)

Wohlberg, Brendt

2017-06-20

Computationally efficient algorithms may be applied for fast dictionary learning solving the convolutional sparse coding problem in the Fourier domain. More specifically, efficient convolutional sparse coding may be derived within an alternating direction method of multipliers (ADMM) framework that utilizes fast Fourier transforms (FFT) to solve the main linear system in the frequency domain. Such algorithms may enable a significant reduction in computational cost over conventional approaches by implementing a linear solver for the most critical and computationally expensive component of the conventional iterative algorithm. The theoretical computational cost of the algorithm may be reduced from O(M.sup.3N) to O(MN log N), where N is the dimensionality of the data and M is the number of elements in the dictionary. This significant improvement in efficiency may greatly increase the range of problems that can practically be addressed via convolutional sparse representations.

Validating User Flows to Protect Software Defined Network Environments

Directory of Open Access Journals (Sweden)

Ihsan H. Abdulqadder

2018-01-01

Full Text Available Software Defined Network is a promising network paradigm which has led to several security threats in SDN applications that involve user flows, switches, and controllers in the network. Threats as spoofing, tampering, information disclosure, Denial of Service, flow table overloading, and so on have been addressed by many researchers. In this paper, we present novel SDN design to solve three security threats: flow table overloading is solved by constructing a star topology-based architecture, unsupervised hashing method mitigates link spoofing attack, and fuzzy classifier combined with L1-ELM running on a neural network for isolating anomaly packets from normal packets. For effective flow migration Discrete-Time Finite-State Markov Chain model is applied. Extensive simulations using OMNeT++ demonstrate the performance of our proposed approach, which is better at preserving holding time than are other state-of-the-art works from the literature.

New Bases for Old: An Unusual View of the Philippine Bases Problem.

Science.gov (United States)

1984-12-01

in the Philippine Islands? They nestle in a country with which we have had (relatively) good relations for almost a century, where the people really...34"- / " ’ -" rr ’- - MALAYSIA . omn, I ’V v.9 s - -, - -300 Figure 1. The Philippines, Geographical Setting 14 -’.’,’?’v:? :9::,:’i’.".i i...be imported. Some sites in Indonesia, Malaysia , Singapore, and Taiwan don’t have the same problems as the small islands, but they pose political

Computational Challenge of Fractional Differential Equations and the Potential Solutions: A Survey

Directory of Open Access Journals (Sweden)

Chunye Gong

2015-01-01

Full Text Available We present a survey of fractional differential equations and in particular of the computational cost for their numerical solutions from the view of computer science. The computational complexities of time fractional, space fractional, and space-time fractional equations are O(N2M, O(NM2, and O(NM(M + N compared with O(MN for the classical partial differential equations with finite difference methods, where M, N are the number of space grid points and time steps. The potential solutions for this challenge include, but are not limited to, parallel computing, memory access optimization (fractional precomputing operator, short memory principle, fast Fourier transform (FFT based solutions, alternating direction implicit method, multigrid method, and preconditioner technology. The relationships of these solutions for both space fractional derivative and time fractional derivative are discussed. The authors pointed out that the technologies of parallel computing should be regarded as a basic method to overcome this challenge, and some attention should be paid to the fractional killer applications, high performance iteration methods, high order schemes, and Monte Carlo methods. Since the computation of fractional equations with high dimension and variable order is even heavier, the researchers from the area of mathematics and computer science have opportunity to invent cornerstones in the area of fractional calculus.

La lectura en formatos digitales en el Chile actual: nuevas prácticas y viejas desigualdades

Directory of Open Access Journals (Sweden)

Cristóbal Moya

2017-01-01

Full Text Available En el presente artículo se caracteriza la fisionomía de la lectura en formatos digitales, especialmente en comparación con los impresos. Para esto se analiza la lectura en formatos digitales de cuatro materiales de lectura en el Chile actual (libros, revistas, periódicos e historietas a partir del Estudio de Comportamiento Lector 2014. Las prácticas lectoras son analizadas en cuanto prácticas culturales más amplias, lo que permite dar cuenta de la afinidad existente entre prácticas lectoras y determinados grupos sociales. En particular, se examinan las implicancias de ser un “lector omnívoro” en términos de formatos digitales e impresos. Se encuentra que los “lectores omnívoros” corresponden a perfiles lectores de posiciones sociales aventajadas en términos de educación e ingresos del hogar. Además, los omnívoros son quienes exhiben una mayor disposición a leer distintos materiales y en distintos formatos. Finalmente, se evidencia que existe una reproducción intergeneracional de la desigual disposición a leer en formatos digitales a partir del análisis de la educación de los padres. PALABRAS CLAVE: lectura digital en Chile, prácticas lectoras en Chile, lectura y distinción social, omnivorismo lector. In this article the main features of the format of digital reading are presented, particularly in comparison with print. In order to carry out this aim, the reading in digital format of four reading materials in contemporary Chile (books, magazines, newspapers and comics is analyzed drawing on the Estudio de Comportamiento Lector 2014 (Study of Reading Behavior. Reading practices are analyzed as broader cultural practices, which allows to establish links between reading practices and certain social groups. Particularly, the implications of being an ‘omnivore reader’ are examined, considering digital and print formats. Results show that ‘omnivore readers’ correspond to reading profiles of advantaged social

Very High Speed Integrated Circuits - VHSIC - Final Program Repoort

Science.gov (United States)

1990-09-30

emphasis ill ordeFr to (U hieci’ the i/ urease (I mIliitdF capa)(bility L’XI)L’t(’d /)1omn its resiuIh x.’ -Ricluard J). [)ehaitr. Undicer Sec reta/vy...Many new and difficult fabrication problems had to be solved, especially in the areas of silicon substrate material, fine-line lithography, multi- layer ...toward submicron geometries, even in the commercial world ." "Among the technical breakthrou hs spawned by VHSIC is the use of multiple layers of wetal

Industry activities to improve valve performance

Energy Technology Data Exchange (ETDEWEB)

Callaway, C.

1996-12-01

Motor-operated valve issues refuse to go away. For over a decade the industry and the NRC have been focusing extraordinary resources on assuring these special components operate when called upon. Now that industry has fixed the design deficiencies, it is focusing on assuring that they perform their safety function within the current licensing basis for the remainder of plant life. NEI supported the efforts by ASME to develop OMN-1 and was encouraged that the industry and the NRC worked together to develop risk and performance based approaches to maintain MOV performance.

Vegetasjonskartlegging i Vegaøyan verdensarvområde 2010

OpenAIRE

Aune, Sigrun; Carlsen, Thomas

2011-01-01

Vegetasjonen på et utvalg øyer ble kartlagt i 2010 for å få oversikt over de botaniske verdiene. De kartlagte øyene inkluderer Store Emårsøya, Kvalholmen, Omnøya, øyer rundt Lisøya, samt noen enkeltøyer nord for hovedøya Vega. Vegetasjonstyper etter Fremstad (1997) er fremstilt på kart og rapporten inneholder i tillegg artslister over registrerte planter. Kartleggingen skal brukes som grunnlag for senere utarbeiding av skjøtselsplaner for områdene og ses i sammenheng med tidligere kartlegging...

Roy–Steiner equations for πN scattering

Directory of Open Access Journals (Sweden)

Ruiz de Elvira J.

2014-06-01

Full Text Available In this talk, we present a coupled system of integral equations for the πN → πN (s-channel and ππ → N̅N (t-channel lowest partial waves, derived from Roy–Steiner equations for pion–nucleon scattering. After giving a brief overview of this system of equations, we present the solution of the t-channel sub-problem by means of Muskhelishvili–Omnès techniques, and solve the s-channel sub-problem after finding a set of phase shifts and subthreshold parameters which satisfy the Roy–Steiner equations.

A Parallel Biological Optimization Algorithm to Solve the Unbalanced Assignment Problem Based on DNA Molecular Computing.

Science.gov (United States)

Wang, Zhaocai; Pu, Jun; Cao, Liling; Tan, Jian

2015-10-23

The unbalanced assignment problem (UAP) is to optimally resolve the problem of assigning n jobs to m individuals (m applied mathematics, having numerous real life applications. In this paper, we present a new parallel DNA algorithm for solving the unbalanced assignment problem using DNA molecular operations. We reasonably design flexible-length DNA strands representing different jobs and individuals, take appropriate steps, and get the solutions of the UAP in the proper length range and O(mn) time. We extend the application of DNA molecular operations and simultaneity to simplify the complexity of the computation.

Evaluation of the magnetocaloric response of nano-sized La0.7Ca0.3Mn1-xNixO3 manganites synthesized by auto-combustion method

Science.gov (United States)

Gómez, Adrián; Chavarriaga, Edgar; Supelano, Iván; Parra, Carlos Arturo; Morán, Oswaldo

2018-05-01

A systematic study of the dependence of the magnetization on the magnetic field around the ferromagnetic-paramagnetic phase transition temperature is carried out on La0.7Ca0.3Mn1-xNixO3 (x=0, 0.02, 0.07, and 1) samples synthesized by auto-combustion method. The successful substitution of Mn3+ ions by Ni2+ ions in the La0.7Ca0.3MnO3 lattice is corroborated by X-ray diffraction technique. Banerjees criteria, Arrott plots, and the scaling hypothesis are used to analyze the experimental data. It is verified that the Ni-doping increases the operating temperature range for magnetocaloric effect through tuning of the magnetic transition temperature. Probably, the replacement of Mn3+ by Ni2+ ions in the La0.7Ca0.3MnO3 lattice weakens the Mn3+-O-Mn4+ double exchange interaction, which leads to a decrease in the transition temperature and magnetic moment in the samples. The Arrott plots suggest that the phase transition from ferromagnetic to paramagnetic in the nano-sized manganite is of second order. The analysis of the magnetization results show that the maximum magnetic entropy changes observed for x=0, 0.02, 0.07, and 0.1 compositions are 0.85, 0.77, 0.63, and 0.59 J/kg K, under a magnetic field of 1.5 T. These values indicate that the magnetic entropy change achieved for La0.7Ca0.3Mn1-xNixO3 manganites synthesized by auto-combustion method is higher than those reported for other manganites with comparable Ni-doping levels but synthesized by standard solid state reaction. It is also observed that the addition of Ni2+ increases the value of the relative cooling power as compared to that of the parent compound. The highest value of this parameter (˜60 J/kg) is found for a Ni-doping level of 2 % around 230 K in a field of 1.5 T.

A RED modified weighted moving average for soft real-time application

Directory of Open Access Journals (Sweden)

Domanśka Joanna

2014-09-01

Full Text Available The popularity of TCP/IP has resulted in an increase in usage of best-effort networks for real-time communication. Much effort has been spent to ensure quality of service for soft real-time traffic over IP networks. The Internet Engineering Task Force has proposed some architecture components, such as Active Queue Management (AQM. The paper investigates the influence of the weighted moving average on packet waiting time reduction for an AQM mechanism: the RED algorithm. The proposed method for computing the average queue length is based on a difference equation (a recursive equation. Depending on a particular optimality criterion, proper parameters of the modified weighted moving average function can be chosen. This change will allow reducing the number of violations of timing constraints and better use of this mechanism for soft real-time transmissions. The optimization problem is solved through simulations performed in OMNeT++ and later verified experimentally on a Linux implementation

Doses produced in Spain as a results of radiation-based diagnosis (Projects Dopoes{sub D}omnes); Dosis producidas en Espana como consecuencia del diagnostico con radiaciones (Proyectos Dopoes{sub D}omnes)

Energy Technology Data Exchange (ETDEWEB)

Ruiz Cruces, R.; Ramirez Vera, M. L.; Alvarez Garcia, C.; Ferrer, N.

2016-08-01

The number of medical examinations and procedures that use ionizing radiation have continuously increased in recently years. More than 90% of human-generated exposures to ionizing radiation are from medical uses and the collective dose due to patient exposures is 200 times greater than the occupational dose of exposed workers. At the same time, the emergence of new technologies, the increased use of Computerized Tomography (CT)-even for pediatric patients- the development of digital radiography, interventional radiology and the new technologies in nuclear medicine with the use of hybrid PET/CT and SPECT/CT equipment have all contributed as well to an increase in the doses received by patients. This poses a challenge to the regulatory authorities in the field of radiological protection, the goal of which is to makes sure that the risks to patients are as low as possible compared to the benefits yielded by the use of ionizing radiation for medical purposes, in accordance with ALARA criteria. (Author)

Are there realistically interpretable local theories?

International Nuclear Information System (INIS)

d'Espagnat, B.

1989-01-01

Although it rests on strongly established proofs, the statement that no realistically interpretable local theory is compatible with some experimentally testable predictions of quantum mechanics seems at first sight to be incompatible with a few general ideas and clear-cut statements occurring in recent theoretical work by Griffiths, Omnes, and Ballentine and Jarrett. It is shown here that in fact none of the developments due to these authors can be considered as a realistically interpretable local theory, so that there is no valid reason for suspecting that the existing proofs of the statement in question are all flawed

Galaxy formation from annihilation-generated supersonic turbulence in the baryon-symmetric big-bang cosmology and the gamma ray background spectrum

Science.gov (United States)

Stecker, F. W.; Puget, J. L.

1972-01-01

Following the big-bang baryon symmetric cosmology of Omnes, the redshift was calculated to be on the order of 500-600. It is show that, at these redshifts, annihilation pressure at the boundaries between regions of matter and antimatter drives large scale supersonic turbulence which can trigger galaxy formation. This picture is consistent with the gamma-ray background observations discussed previously. Gravitational binding of galaxies then occurs at a redshift of about 70, at which time vortical turbulent velocities of about 3 x 10 to the 7th power cm/s lead to angular momenta for galaxies comparable with measured values.

Tight bounds on the size of neural networks for classification problems

Energy Technology Data Exchange (ETDEWEB)

Beiu, V. [Los Alamos National Lab., NM (United States); Pauw, T. de [Universite Catholique de Louvain, Louvain-la-Neuve (Belgium). Dept. de Mathematique

1997-06-01

This paper relies on the entropy of a data-set (i.e., number-of-bits) to prove tight bounds on the size of neural networks solving a classification problem. First, based on a sequence of geometrical steps, the authors constructively compute an upper bound of O(mn) on the number-of-bits for a given data-set - here m is the number of examples and n is the number of dimensions (i.e., R{sup n}). This result is used further in a nonconstructive way to bound the size of neural networks which correctly classify that data-set.

O razlagi sodnih precedensov in sodb ter posebej sodb Evropskega sodišča za človekove pravice

OpenAIRE

Zupančič, Boštjan M.

2014-01-01

Sodba načeloma ni nekaj, kar je treba ali bi bilo sploh treba razlagati. Konkretna sodba inter partes mora razlagati abstraktno pravno normo. Vendar če bi bilo res, da so sodbe ESČP strogo omejene na učinek inter partes (kot je to zapisano v 46. členu Evropske konvencije), ne bi bilo potrebe po razlagi njihovega učinka erga omnes. Za ustavna sodišča in druga sodišča zadnje stopnje silogistično sklepanje (logična subsumpcija konkretnih dejstev pod abstraktno normo), ki so ga kontinentalni prav...

Routing in Mobile Wireless Sensor Networks: A Leader-Based Approach.

Science.gov (United States)

Burgos, Unai; Amozarrain, Ugaitz; Gómez-Calzado, Carlos; Lafuente, Alberto

2017-07-07

This paper presents a leader-based approach to routing in Mobile Wireless Sensor Networks (MWSN). Using local information from neighbour nodes, a leader election mechanism maintains a spanning tree in order to provide the necessary adaptations for efficient routing upon the connectivity changes resulting from the mobility of sensors or sink nodes. We present two protocols following the leader election approach, which have been implemented using Castalia and OMNeT++. The protocols have been evaluated, besides other reference MWSN routing protocols, to analyse the impact of network size and node velocity on performance, which has demonstrated the validity of our approach.

Heterometallic cerium(IV) perrhenate, permanganate, and molybdate complexes supported by the imidodiphosphinate ligand [N(i-Pr2PO)2]-.

Science.gov (United States)

Wang, Guo-Cang; Sung, Herman H Y; Dai, Feng-Rong; Chiu, Wai-Hang; Wong, Wai-Yeung; Williams, Ian D; Leung, Wa-Hung

2013-03-04

Heterometallic cerium(IV) perrhenate, permanganate, and molybdate complexes containing the imidodiphosphinate ligand [N(i-Pr2PO)2](-) have been synthesized, and their reactivity was investigated. Treatment of Ce[N(i-Pr2PO)2]3Cl (1) with AgMO4 (M = Re, Mn) afforded Ce[N(i-Pr2PO)2]3(ReO4) (2) or Ce2[N(i-Pr2PO)2]6(MnO4)2 (3). In the solid state, 3 is composed of a [Ce2{N(i-Pr2PO)2}6(MnO4)](+) moiety featuring a weak Ce-OMn interaction [Ce-OMn distance = 2.528(8) Å] and a noncoordinating MnO4(-) counteranion. While 3 is stable in the solid state and acetonitrile solution, it decomposes readily in other organic solvents, such as CH2Cl2. 3 can oxidize ethylbenzene to acetophenone at room temperature. Treatment of 1 with AgBF4, followed by reaction with [n-Bu4N]2[MoO4], afforded [Ce{N(i-Pr2PO)2}3]2(μ-MoO4) (4). Reaction of trans-Ce[N(i-Pr2PO)2]2(NO3)2 (5), which was prepared from (NH4)2Ce(NO3)6 and K[N(i-Pr2PO)2], with 2 equiv of [n-Bu4N][Cp*MoO3] yielded trans-Ce[N(i-Pr2PO)2]2(Cp*MoO3)2 (6). 4 can catalyze the oxidation of methyl phenyl sulfide with tert-butyl hydroperoxide with high selectivity. The crystal structures of complexes 3-6 have been determined.

Religiones omnívoras: el chamanismo chané y las relaciones interétnicas

Directory of Open Access Journals (Sweden)

Diego Villar

2007-12-01

Full Text Available Of Arawak origin, the ethnic group identified as the Chané indigenous group in the Amerindian literature, settled on the eastern slopes of the Andes before the Conquest of the Occidental region or Paraguayan Chaco took place. There, this group engaged in complex inter-ethnic relationships with other Guarani-speaking ethnic groups, Chaco natives, and thereafter, as the colonization process consolidated, with several Creole social agents: landowners, foremen of sugar plantations, the military, and missionaries. Supported by ethnographic and ethno-historical documents, the author suggests that the open, flexible, malleable and integrating organization of Chané shamanism was marked by these multiple historical interactions, thereby becoming an ideal symbolic language to reflect the problems arising from situations of intercultural contact.

Novel Bioinformatics-Based Approach for Proteomic Biomarkers Prediction of Calpain-2 & Caspase-3 Protease Fragmentation: Application to βII-Spectrin Protein

Science.gov (United States)

El-Assaad, Atlal; Dawy, Zaher; Nemer, Georges; Kobeissy, Firas

2017-01-01

The crucial biological role of proteases has been visible with the development of degradomics discipline involved in the determination of the proteases/substrates resulting in breakdown-products (BDPs) that can be utilized as putative biomarkers associated with different biological-clinical significance. In the field of cancer biology, matrix metalloproteinases (MMPs) have shown to result in MMPs-generated protein BDPs that are indicative of malignant growth in cancer, while in the field of neural injury, calpain-2 and caspase-3 proteases generate BDPs fragments that are indicative of different neural cell death mechanisms in different injury scenarios. Advanced proteomic techniques have shown a remarkable progress in identifying these BDPs experimentally. In this work, we present a bioinformatics-based prediction method that identifies protease-associated BDPs with high precision and efficiency. The method utilizes state-of-the-art sequence matching and alignment algorithms. It starts by locating consensus sequence occurrences and their variants in any set of protein substrates, generating all fragments resulting from cleavage. The complexity exists in space O(mn) as well as in O(Nmn) time, where N, m, and n are the number of protein sequences, length of the consensus sequence, and length per protein sequence, respectively. Finally, the proposed methodology is validated against βII-spectrin protein, a brain injury validated biomarker.

Oligonephronia and Wolf-Hirschhorn syndrome: A further observation.

Science.gov (United States)

Gatto, Antonio; Ferrara, Pietro; Leoni, Chiara; Onesimo, Roberta; Zollino, Marcella; Emma, Francesco; Zampino, Giuseppe

2018-02-01

Wolf-Hirschhorn syndrome (WHS) is a rare chromosomal disorder caused by a partial deletion of chromosome 4 (4p16.3p16.2). We describe a case of a male 9 years old children with WHS proteinuria and hypertension. Laboratory data showed creatinine 1.05 mg/dl, GFR 65.9 ml/min/1.73 m 2 , cholesterol 280 mg/dl, triglyceride 125 mg/dl with electrolytes in the normal range. Urine collection showed protein 2.72 g/L with a urine protein/creatinine ratio (U P /U Cr ratio) of 4.2 and diuresis of 1,100 ml. Renal ultrasound showed reduced kidney dimensions with diffusely hyperechogenic cortex and poorly visualized pyramids. Renal biopsy showed oligonephronia with focal segmental glomerulosclerosis associated with initial tubulointerstitial sclerotic atrophy. The child began therapy with Angiotensin-converting enzyme inhibitors (ACE-inhibitors) to reduce proteinuria and progression of chronic kidney disease. In the literature the anomalies of number of glomeruli oligonephronia and oligomeganephronia (OMN) are described in two forms, one without any associated anomalies, sporadic, and solitary and the other with one or more anomalies. Our review of the literature shows that the pathogenesis of this anomaly is unknown but the role of chromosome 4 is very relevant. Many cases of OMN are associated with anomalies on this chromosome, in the literature cases series we observed this association in 14/48 cases (29.2%) and in 7 of these 14 cases with WHS. Our case and the review of literature demonstrate how periodic urinalysis and renal ultrasound monitoring is recommended in patients affected by WHS and the renal biopsy must be performed when there is the onset of proteinuria. © 2017 Wiley Periodicals, Inc.

vertical bar Vub vertical bar from exclusive semileptonic B→π decays

International Nuclear Information System (INIS)

Flynn, Jonathan M.; Nieves, Juan

2007-01-01

We use Omnes representations of the form factors f + and f 0 for exclusive semileptonic B→π decays, paying special attention to the treatment of the B* pole and its effect on f + . We apply them to combine experimental partial branching fraction information with theoretical calculations of both form factors to extract vertical bar V ub vertical bar. The precision we achieve is competitive with the inclusive determination and we do not find a significant discrepancy between our result, vertical bar V ub vertical bar=(3.90+/-0.32+/-0.18)x10 -3 , and the inclusive world average value (4.45+/-0.20+/-0.26)x10 -3 [Heavy Flavor Averaging Group (HFAG), hep-ex/0603003

The Legislative Process as a Safeguard of the Public Servant´S Right to Go on Strike

Directory of Open Access Journals (Sweden)

Edilene Lôbo

2016-10-01

Full Text Available The right to go on strike can only be realized after a specific national bill – such law has been denied for decades. Acknowledged the omission it should be remedied. The Supreme Court, nonetheless, declared the legislative gap but created, by analogy, rules and procedural issues, bestowing upon the remaining courts discretion to establish a stricter regime and erga omnes effect replacing the legislator. This work criticizes the right´s regulation through judicial rulings removed from the legislative process. The methodology utilized, supported by Estate´s  functions  separation  and  democratic  process  theories,  consisted  in  exam  of legislation, court rulings AND specialized literature.

Magnetic and optical properties of manganese doped ZnO nanoparticles synthesized by sol-gel technique

KAUST Repository

Omri, Karim; El Ghoul, Jaber; Lemine, O. M.; Bououdina, M.; Zhang, Bei; El Mir, Lassaad

2013-01-01

Mn doped ZnO nanoparticles with different doping concentration (1, 2, 3, 4, 5 at.%) were prepared by sol-gel method using supercritical drying conditions of ethyl alcohol. The structural, morphological, optical and magnetic properties of the as-prepared nanoparticles were investigated by X-ray diffraction (XRD), transmission electron microscopy (TEM), UV measurements and superconducting quantum interference device (SQUID). The structural properties showed that the undoped and Mn doped ZnO nanoparticles exhibit hexagonal wurtzite structure. From the optical studies, the transmittance in UV region was decreased with the increase of Mn concentration. For Mn doped ZnO nanoparticles the optical band gap varies between 3.34 eV and 3.22 eV. It was found that the doping Mn 2+ ions have a significant influence on the optical properties. The magnetic characterization of the samples with 1% and 5% Mn concentrations reveal diamagnetic behavior for the first one and the presence of both paramagnetic and ferromagnetic behavior for the second. The room ferromagnetic component is due to the presence of the secondary phase ZnOMn3 which is confirmed by XRD study. © 2013 Elsevier Ltd. All rights reserved.

Magnetic and optical properties of manganese doped ZnO nanoparticles synthesized by sol-gel technique

KAUST Repository

Omri, Karim

2013-08-01

Mn doped ZnO nanoparticles with different doping concentration (1, 2, 3, 4, 5 at.%) were prepared by sol-gel method using supercritical drying conditions of ethyl alcohol. The structural, morphological, optical and magnetic properties of the as-prepared nanoparticles were investigated by X-ray diffraction (XRD), transmission electron microscopy (TEM), UV measurements and superconducting quantum interference device (SQUID). The structural properties showed that the undoped and Mn doped ZnO nanoparticles exhibit hexagonal wurtzite structure. From the optical studies, the transmittance in UV region was decreased with the increase of Mn concentration. For Mn doped ZnO nanoparticles the optical band gap varies between 3.34 eV and 3.22 eV. It was found that the doping Mn 2+ ions have a significant influence on the optical properties. The magnetic characterization of the samples with 1% and 5% Mn concentrations reveal diamagnetic behavior for the first one and the presence of both paramagnetic and ferromagnetic behavior for the second. The room ferromagnetic component is due to the presence of the secondary phase ZnOMn3 which is confirmed by XRD study. © 2013 Elsevier Ltd. All rights reserved.

Sigma exchange in the nuclear force and effective field theory

International Nuclear Information System (INIS)

Donoghue, John F.

2006-01-01

In the phenomenological description of the nuclear interaction an important role is traditionally played by the exchange of a scalar I=0 meson, the sigma, of mass 500-600 MeV, which however is not seen clearly in the particle spectrum and which has a very ambiguous status in QCD. I show that a remarkably simple and reasonably controlled combination of ingredients can reproduce the features of this part of the nuclear force. The use of chiral perturbation theory calculations for two pion exchange supplemented by the Omnes function for pion rescattering suffices to reproduce the magnitude and shape of the exchange of a supposed σ particle. I also attempt to relate this description to the contact interaction that enters more modern descriptions of the internucleon interaction

SWAMP+: multiple subsequence alignment using associative massive parallelism

Energy Technology Data Exchange (ETDEWEB)

Steinfadt, Shannon Irene [Los Alamos National Laboratory; Baker, Johnnie W [KENT STATE UNIV.

2010-10-18

A new parallel algorithm SWAMP+ incorporates the Smith-Waterman sequence alignment on an associative parallel model known as ASC. It is a highly sensitive parallel approach that expands traditional pairwise sequence alignment. This is the first parallel algorithm to provide multiple non-overlapping, non-intersecting subsequence alignments with the accuracy of Smith-Waterman. The efficient algorithm provides multiple alignments similar to BLAST while creating a better workflow for the end users. The parallel portions of the code run in O(m+n) time using m processors. When m = n, the algorithmic analysis becomes O(n) with a coefficient of two, yielding a linear speedup. Implementation of the algorithm on the SIMD ClearSpeed CSX620 confirms this theoretical linear speedup with real timings.

Total Environmental Impact of Three Main Dietary Patterns in Relation to the Content of Animal and Plant Food.

Science.gov (United States)

Baroni, Luciana; Berati, Marina; Candilera, Maurizio; Tettamanti, Massimo

2014-07-25

Based on a review of the most recent available scientific evidence, the new Dietary Guidelines for Americans 2010 (USDA DG) provide information and advice for choosing a healthy diet. To compare the environmental impacts of, respectively, omnivorous (OMN), lacto-ovo-vegetarian (LOV) and vegan (VEG) dietary patterns as suggested in the USDA DG, we analyzed the three patterns by Life Cycle Assessment (LCA) methodology. The presence of animal food in the diet was the main determinant of environmental impact. The major impact always stemmed from land and water use. The second largest impact came from energy use. Emission of toxic inorganic compounds into the atmosphere was the third cause of impact. Climate change and acidification/eutrophication represented other substantial impacts.

Total Environmental Impact of Three Main Dietary Patterns in Relation to the Content of Animal and Plant Food

Directory of Open Access Journals (Sweden)

Luciana Baroni

2014-07-01

Full Text Available Based on a review of the most recent available scientific evidence, the new Dietary Guidelines for Americans 2010 (USDA DG provide information and advice for choosing a healthy diet. To compare the environmental impacts of, respectively, omnivorous (OMN, lacto-ovo-vegetarian (LOV and vegan (VEG dietary patterns as suggested in the USDA DG, we analyzed the three patterns by Life Cycle Assessment (LCA methodology. The presence of animal food in the diet was the main determinant of environmental impact. The major impact always stemmed from land and water use. The second largest impact came from energy use. Emission of toxic inorganic compounds into the atmosphere was the third cause of impact. Climate change and acidification/eutrophication represented other substantial impacts.

Les indispensables de la mécanique quantique

CERN Document Server

Omnès, Roland

2006-01-01

Voulez-vous connaître la mécanique quantique ? Voulez-vous apprendre à calculer une équation de Schrödinger ? Voulez-vous comprendre la décohérence ou le passage du microscopique au macroscopique ? Ou l'irréversibilité du temps ? La causalité ? La dualité onde-corpuscule ? Le paradoxe de Einstein-Podolsky-Rosen ? Roland Omnès a écrit cette introduction à la mécanique quantique pour en démonter pas à pas le formalisme et en expliciter les concepts fondamentaux. Il veut faire comprendre la puissance expérimentale de cette physique jamais démentie, et sa puissance théorique qui oblige à repenser la matière

A Parallel Biological Optimization Algorithm to Solve the Unbalanced Assignment Problem Based on DNA Molecular Computing

Directory of Open Access Journals (Sweden)

Zhaocai Wang

2015-10-01

Full Text Available The unbalanced assignment problem (UAP is to optimally resolve the problem of assigning n jobs to m individuals (m < n, such that minimum cost or maximum profit obtained. It is a vitally important Non-deterministic Polynomial (NP complete problem in operation management and applied mathematics, having numerous real life applications. In this paper, we present a new parallel DNA algorithm for solving the unbalanced assignment problem using DNA molecular operations. We reasonably design flexible-length DNA strands representing different jobs and individuals, take appropriate steps, and get the solutions of the UAP in the proper length range and O(mn time. We extend the application of DNA molecular operations and simultaneity to simplify the complexity of the computation.

O/MN Budget Execution at U.S. Naval Shore Activities: A Model for Improving Resource Allocation.

Science.gov (United States)

1981-12-01

authors of this thesis to opt for on site administration of the questionnaire when testing the model at actual commands. At this point a broad general...interface with the respondents. This is what will be done when the questionnaire is administered on site at actual USN activities. At this point, however...those objective. Is thus for tie, B r d*nateet ennhanced written ai ti 1 fiquoA by the Commaul9 fco VARIANCE RIPIA3ATION PORN

TRAMA TRÓFICA DE LOS PECES DEL EMBALSE LA GOLETA (PRIMAVERA 2007 EN EL ESTADO DE MÉXICO

Directory of Open Access Journals (Sweden)

N. A. Navarrete-Salgado

2010-01-01

Full Text Available En este estudio se determinó la posición trófica de la ictiofauna del embalse La Goleta, Estado de México. Se realizó un muestreo en la primavera de 2007, donde se registraron los siguientes parámetros del agua, temperatura, profundidad, transparencia, turbidez, oxígeno disuelto, conductividad, pH, dureza, y alcalinidad, también se realizó la captura de peces utilizando un chinchorro charalero. El análisis del contenido estomacal se determinó con el método numérico y volumétrico. Los peces capturados pertenecen a tres especies: Menidia jordani, la cual se considera una especie zooplanctófaga generalista; Cyprinus carpio, es omnívoro muy generalista y Carassius auratus que es un pez herbívoro generalista.

Decohering histories and open quantum systems

International Nuclear Information System (INIS)

Chisolm, Eric D

2009-01-01

I briefly review the 'decohering histories' or 'consistent histories' formulation of quantum theory, due to Griffiths, Omnes, and Gell-Mann and Hartle (and the subject of my graduate work with George Sudarshan). I also sift through the many meanings that have been attached to decohering histories, with an emphasis on the most basic one: Decoherence of appropriate histories is needed to establish that quantum mechanics has the correct classical limit. Then I will describe efforts to find physical mechanisms that do this. Since most work has focused on density matrix versions of decoherence, I'll consider the relation between the two formulations, which historically has not been straightforward. Finally, I'll suggest a line of research that would use recent results by Sudarshan to illuminate this aspect of the classical limit of quantum theory.

Amplitude analysis of the anomalous decay η'→π+π-γ

Science.gov (United States)

Dai, Ling-Yun; Kang, Xian-Wei; Meißner, Ulf-G.; Song, Xin-Ying; Yao, De-Liang

2018-02-01

In this paper we perform an amplitude analysis of η'→π+π-γ and confront it with the latest BESIII data. Based on the final-state interaction theorem, we represent the amplitude in terms of an Omnés function multiplied by a form factor that corresponds to the contributions from left-hand cuts and right-hand cuts in the inelastic channels. We also take into account the isospin violation effect induced by ρ -ω mixing. Our results show that the anomaly contribution is mandatory in order to explain the data. Its contribution to the decay width of Γ (η'→π π γ ) is larger than that induced by isospin violation. Finally we extract the pole positions of the ρ and ω as well as their corresponding residues.

Unus pro omnibus, omnes pro uno: A novel, evidence-based, unifying theory for the pathogenesis of endometriosis.

Science.gov (United States)

Laganà, Antonio Simone; Vitale, Salvatore Giovanni; Salmeri, Francesca Maria; Triolo, Onofrio; Ban Frangež, Helena; Vrtačnik-Bokal, Eda; Stojanovska, Lily; Apostolopoulos, Vasso; Granese, Roberta; Sofo, Vincenza

2017-06-01

The theory of retrograde menstruation as aetiopathogenesis of endometriosis formulated by John Sampson in 1927 shows clear shortcomings: this does not explain why retrograde menstruation is a physiological process that affects 90% of women, while endometriosis occurs in only 10% of cases; it also does not explain the endometriotic foci distant from the pelvis, nor explains the cases of endometriosis in male patients. The immunological alterations of the peritoneal fluid explains the effects of disease, such as the inhibition of the physiological processes of cytolysis, but does not explain the cause. There is evidence to support the hypothesis that ectopic müllerian remnants of the endometrium, endocervix and endosalpinx are items from the genital ridge leaked during organogenesis. It is known that tissues derived from coelomatic epithelial and mesenchymal cells have the potential to metaplastically differentiate into epithelium and stroma. In addition, the phenotype of the ectopic endometrial cells is significantly different from those ectopic. There is scientific evidence that, during organogenesis, the genes of the Homeobox and Wingless family play a fundamental role in the differentiation of the ducts of Muller and development of the anatomical structure of the urogenital tract. We present here a hypothesis that deregulation of genes and the Wnt signaling pathway Wnt/β-catenin leads to aberrations and deregulation within the mesoderm, thus, may cause aberrant placement of stem cells. In addition, immune cells, adhesion molecules, extracellular matrix metalloproteinase and pro-inflammatory cytokines activate/alter peritoneal microenvironment, creating the conditions for differentiation, adhesion, proliferation and survival of ectopic endometrial cells. Copyright © 2017 Elsevier Ltd. All rights reserved.

“OMNE, QUOD NON EST EX FIDE, PECCATUM EST" THE RELEVANCE OF GOOD FAITH IN CANONICAL TRANSACTIO

Directory of Open Access Journals (Sweden)

Sara Parini Vincenti

2016-06-01

Full Text Available It is quite clear that there is a canonical foundation underlying the institute of transactio. Indeed, a compromise is often reached when a dispute has already entered the litigation phase, and as such legal doctrine tends to separate the economic aspect from the ethical aspect in its interpretation. Though the Church has a necessarily imperfect system of legal sanctions at its disposal, over the centuries it has in fact played a fundamental role in the ethical aspect of compromise. Indeed, the Gospel teaches that every human relationship must be based on concordia, as concordia mater est unitatis: if parties have ignored such morals and are about to litigate, or have already started legal proceedings, the Church must exhort them to settle the dispute. This article aims to examine the relevance of two of the essential requirements of transactio –namely lis and res dubia – within the Decretals (X 1.36. 1-11 de transactionibus. The framework of this analysis is provided by the tenet Effectus transactionis est, ut ei stetur, which sanctions the effectiveness of transactio as a juristic act. The goal is to evaluate how the uncertainty of legal proceedings relates to the principle of good faith in canon law.

Analyses of resource reservation schemes for optical burst switching networks

Science.gov (United States)

Solanska, Michaela; Scholtz, Lubomir; Ladanyi, Libor; Mullerova, Jarmila

2017-12-01

With growing demands of Internet Protocol services for transmission capacity and speed, the Optical Burst Switching presents the solution for future high-speed optical networks. Optical Burst Switching is a technology for transmitting large amounts of data bursts through a transparent optical switching network. To successfully transmit bursts over OBS network and reach the destination node, resource reservation schemes have to be implemented to allocate resources and configure optical switches for that burst at each node. The one-way resource reservation schemes and the performance evaluation of reservation schemes are presented. The OBS network model is performed using OMNeT++ simulation environment. During the reservation of network resources, the optical cross-connect based on semiconductor optical amplifier is used as the core node. Optical switches based on semiconductor optical amplifiers are a promising technology for high-speed optical communication networks.

On the graph turnpike problem

KAUST Repository

Feder, Tomá s; Motwani, Rajeev

2009-01-01

Results on graph turnpike problem without distinctness, including its NP-completeness, and an O(m+n log n) algorithm, is presented. The usual turnpike problem has all pairwise distances given, but does not specify which pair of vertices w e corresponds to. There are two other problems that can be viewed as special cases of the graph turnpike problem, including the bandwidth problem and the low-distortion graph embedding problem. The aim for the turnpike problem in the NP-complete is to orient the edges with weights w i in either direction so that when the whole cycle is transversed in the real line, it returns to a chosen starting point for the cycle. An instance of the turnpike problem with or without distinctness is uniquely mappable if there exists at most one solution up to translation and choice of orientation.

Decohering histories and open quantum systems

Energy Technology Data Exchange (ETDEWEB)

Chisolm, Eric D, E-mail: echisolm@lanl.go [Theoretical Division, Los Alamos National Laboratory, Los Alamos, NM 87545 (United States)

2009-11-01

I briefly review the 'decohering histories' or 'consistent histories' formulation of quantum theory, due to Griffiths, Omnes, and Gell-Mann and Hartle (and the subject of my graduate work with George Sudarshan). I also sift through the many meanings that have been attached to decohering histories, with an emphasis on the most basic one: Decoherence of appropriate histories is needed to establish that quantum mechanics has the correct classical limit. Then I will describe efforts to find physical mechanisms that do this. Since most work has focused on density matrix versions of decoherence, I'll consider the relation between the two formulations, which historically has not been straightforward. Finally, I'll suggest a line of research that would use recent results by Sudarshan to illuminate this aspect of the classical limit of quantum theory.

On the graph turnpike problem

KAUST Repository

Feder, Tomás

2009-06-01

Results on graph turnpike problem without distinctness, including its NP-completeness, and an O(m+n log n) algorithm, is presented. The usual turnpike problem has all pairwise distances given, but does not specify which pair of vertices w e corresponds to. There are two other problems that can be viewed as special cases of the graph turnpike problem, including the bandwidth problem and the low-distortion graph embedding problem. The aim for the turnpike problem in the NP-complete is to orient the edges with weights w i in either direction so that when the whole cycle is transversed in the real line, it returns to a chosen starting point for the cycle. An instance of the turnpike problem with or without distinctness is uniquely mappable if there exists at most one solution up to translation and choice of orientation.

Two-pass greedy regular expression parsing

DEFF Research Database (Denmark)

Grathwohl, Niels Bjørn Bugge; Henglein, Fritz; Nielsen, Lasse

2013-01-01

We present new algorithms for producing greedy parses for regular expressions (REs) in a semi-streaming fashion. Our lean-log algorithm executes in time O(mn) for REs of size m and input strings of size n and outputs a compact bit-coded parse tree representation. It improves on previous algorithms...... by: operating in only 2 passes; using only O(m) words of random-access memory (independent of n); requiring only kn bits of sequentially written and read log storage, where k ... and not requiring it to be stored at all. Previous RE parsing algorithms do not scale linearly with input size, or require substantially more log storage and employ 3 passes where the first consists of reversing the input, or do not or are not known to produce a greedy parse. The performance of our unoptimized C...

Fate of N and relative efficiency of 15N-labeled organic materials applied to transplanted rice in northern Kyushu region of Japan

International Nuclear Information System (INIS)

Nishida, Mizuhiko; Tsuchiya, Kazunari; Yamamuro, Shigekazu

2004-01-01

Seven kinds of 15 N-labeled organic materials were applied to transplanted rice to investigate their N fate and relative efficiency in the northern Kyushu region of Japan. The 15 N-labeled organic materials examined in a micro-plot experiment were cattle manure compost, poultry manure compost, swine feces, rice straw compost, rice bran, rice straw, and wheat straw. Regarding swine feces, rice bran, and wheat straw, the direct evaluation of their N fate in paddy fields using 15 N organic materials has not been reported. A significant difference in the N fate in response to the type of organic materials was observed in the uptake rate by rice plants. The uptake rate at the maturity stage was significantly higher in poultry manure (29%), swine feces (25%), and rice bran (26%) than for the other organic materials (6-13%). Cattle manure compost showed the lowest value, namely 6-7%. Using the uptake rate of ( 15 NH 4 ) 2 SO 4 observed earlier, the relative efficiency of organ nic materials (relative uptake rate of organic material N to chemical fertilizer N) was calculated as the index of the organic material N efficiency. These relative efficiencies of organic materials derived from animal wastes were 16-19, 81, 72, and 71% for cattle manure compost, poultry manure compost, poultry manure compost without inherent NH 4 -H, and swine feces, respectively, and were similar to those estimated by indirect way. The relative efficiencies of organic materials derived from plant residues were 25-31, 73, 33 and 34% for rice straw compost, rice bran, rice straw, and wheat straw, respectively. The N uptake from the organic materials (OM-N uptake) in swine feces and cattle manure compost continued throughout the rice growth period, whereas the OM-N uptake of the other organic materials declined remarkably after 54 DAT. No significant difference was observed in the residual rate and the loss rate among the organic materials. However, some tendencies that might be related to the

Accelerated Oxygen Atom Transfer and C-H Bond Oxygenation by Remote Redox Changes in Fe3 Mn-Iodosobenzene Adducts.

Science.gov (United States)

de Ruiter, Graham; Carsch, Kurtis M; Gul, Sheraz; Chatterjee, Ruchira; Thompson, Niklas B; Takase, Michael K; Yano, Junko; Agapie, Theodor

2017-04-18

We report the synthesis, characterization, and reactivity of [LFe 3 (PhPz) 3 OMn( s PhIO)][OTf] x (3: x=2; 4: x=3), where 4 is one of very few examples of iodosobenzene-metal adducts characterized by X-ray crystallography. Access to these rare heterometallic clusters enabled differentiation of the metal centers involved in oxygen atom transfer (Mn) or redox modulation (Fe). Specifically, 57 Fe Mössbauer and X-ray absorption spectroscopy provided unique insights into how changes in oxidation state (Fe III 2 Fe II Mn II vs. Fe III 3 Mn II ) influence oxygen atom transfer in tetranuclear Fe 3 Mn clusters. In particular, a one-electron redox change at a distal metal site leads to a change in oxygen atom transfer reactivity by ca. two orders of magnitude. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

DHT-Based Detection of Node Clone in Wireless Sensor Networks

Science.gov (United States)

Li, Zhijun; Gong, Guang

Wireless sensor networks are vulnerable to the node clone attack because of low-cost, resource-constrained sensor nodes, and uncontrolled environments where they are left unattended. Several distributed protocols have been proposed for detecting clone. However, some protocols rely on an implicit assumption that every node is aware of all other nodes' existence; other protocols using an geographic hash table require that nodes know the general network deployment graph. Those assumptions hardly hold for many sensor networks. In this paper, we present a novel node clone detection protocol based on Distributed Hash Table (DHT). DHT provides good distributed properties and our protocol is practical for every kind of sensor networks. We analyze the protocol performance theoretically. Moreover, we implement our protocol in the OMNeT++ simulation framework. The extensive simulation results show that our protocol can detect clone efficiently and holds strong resistance against adversaries.

A beacon interval shifting scheme for interference mitigation in body area networks.

Science.gov (United States)

Kim, Seungku; Kim, Seokhwan; Kim, Jin-Woo; Eom, Doo-Seop

2012-01-01

This paper investigates the issue of interference avoidance in body area networks (BANs). IEEE 802.15 Task Group 6 presented several schemes to reduce such interference, but these schemes are still not proper solutions for BANs. We present a novel distributed TDMA-based beacon interval shifting scheme that reduces interference in the BANs. A design goal of the scheme is to avoid the wakeup period of each BAN coinciding with other networks by employing carrier sensing before a beacon transmission. We analyze the beacon interval shifting scheme and investigate the proper back-off length when the channel is busy. We compare the performance of the proposed scheme with the schemes presented in IEEE 802.15 Task Group 6 using an OMNeT++ simulation. The simulation results show that the proposed scheme has a lower packet loss, energy consumption, and delivery-latency than the schemes of IEEE 802.15 Task Group 6.

Evaluation of video transmission of MAC protocols in wireless sensor network

Science.gov (United States)

Maulidin, Mahmuddin, M.; Kamaruddin, L. M.; Elsaikh, Mohamed

2016-08-01

Wireless Sensor Network (WSN) is a wireless network which consists of sensor nodes scattered in a particular area which are used to monitor physical or environment condition. Each node in WSN is also scattered in sensor field, so an appropriate scheme of MAC protocol should have to develop communication link for data transferring. Video transmission is one of the important applications for the future that can be transmitted with low aspect in side of cost and also power consumption. In this paper, comparison of five different MAC WSN protocol for video transmission namely IEEE 802.11 standard, IEEE 802.15.4 standard, CSMA/CA, Berkeley-MAC, and Lightweight-MAC protocol are studied. Simulation experiment has been conducted in OMNeT++ with INET network simulator software to evaluate the performance. Obtained results indicate that IEEE 802.11 works better than other protocol in term of packet delivery, throughput, and latency.

Evaluating Discovery Services Architectures in the Context of the Internet of Things

Science.gov (United States)

Polytarchos, Elias; Eliakis, Stelios; Bochtis, Dimitris; Pramatari, Katerina

As the "Internet of Things" is expected to grow rapidly in the following years, the need to develop and deploy efficient and scalable Discovery Services in this context is very important for its success. Thus, the ability to evaluate and compare the performance of different Discovery Services architectures is vital if we want to allege that a given design is better at meeting requirements of a specific application. The purpose of this chapter is to provide a paradigm for the evaluation of different Discovery Services for the Internet of Things in terms of efficiency, scalability and performance through the use of simulations. The methodology presented uses the application of Discovery Services to a supply chain with the Service Lookup Service Discovery Service using OMNeT++, an open source network simulation suite. Then, we delve into the simulation design and the details of our findings.

La ciencia omnívora: antropología, capitalismo y estados contemporaneos según Jean y John Comaroff

Directory of Open Access Journals (Sweden)

Luis Fernando Angosto Ferrández

2012-09-01

Full Text Available Muy pocos científicos sociales alcanzan el estatus de clásicos contemporáneos, pero ciertamente incluiríamos a Jean y John Comaroff en dicha categoría. Sus investigaciones se encuentran hoy sin duda en la vanguardia de las ciencias sociales, pero su trabajo ya venía siendo seguido y debatido ampliamente en el campo de la antropología casi tres décadas atrás. Más allá de las fronteras de esta disciplina, su trabajo ha tenido ecos, y continúa resonando, en las comunidades académicas de la sociología, las ciencias políticas y los estudios legales, en clara demostración del potencial del conocimiento antropológico cuando aborda abiertamente las grandes problemáticas de nuestros tiempos. Sólo una pequeña parte de la producción de John y Jean Comaroff ha sido traducida al castellano, pero son muchos los antropólogos españoles y latinoamericanos que conocen sus propuestas teóricas y metodológicas. La conversación que sigue nos brinda la oportunidad de profundizar en los contenidos de dichas propuestas y su relación con las política del conocimiento antropológico, del capitalismo y de los estados contemporáneos.

Traffic Congestion Detection System through Connected Vehicles and Big Data

Directory of Open Access Journals (Sweden)

Néstor Cárdenas-Benítez

2016-04-01

Full Text Available This article discusses the simulation and evaluation of a traffic congestion detection system which combines inter-vehicular communications, fixed roadside infrastructure and infrastructure-to-infrastructure connectivity and big data. The system discussed in this article permits drivers to identify traffic congestion and change their routes accordingly, thus reducing the total emissions of CO2 and decreasing travel time. This system monitors, processes and stores large amounts of data, which can detect traffic congestion in a precise way by means of a series of algorithms that reduces localized vehicular emission by rerouting vehicles. To simulate and evaluate the proposed system, a big data cluster was developed based on Cassandra, which was used in tandem with the OMNeT++ discreet event network simulator, coupled with the SUMO (Simulation of Urban MObility traffic simulator and the Veins vehicular network framework. The results validate the efficiency of the traffic detection system and its positive impact in detecting, reporting and rerouting traffic when traffic events occur.

Traffic Congestion Detection System through Connected Vehicles and Big Data.

Science.gov (United States)

Cárdenas-Benítez, Néstor; Aquino-Santos, Raúl; Magaña-Espinoza, Pedro; Aguilar-Velazco, José; Edwards-Block, Arthur; Medina Cass, Aldo

2016-04-28

This article discusses the simulation and evaluation of a traffic congestion detection system which combines inter-vehicular communications, fixed roadside infrastructure and infrastructure-to-infrastructure connectivity and big data. The system discussed in this article permits drivers to identify traffic congestion and change their routes accordingly, thus reducing the total emissions of CO₂ and decreasing travel time. This system monitors, processes and stores large amounts of data, which can detect traffic congestion in a precise way by means of a series of algorithms that reduces localized vehicular emission by rerouting vehicles. To simulate and evaluate the proposed system, a big data cluster was developed based on Cassandra, which was used in tandem with the OMNeT++ discreet event network simulator, coupled with the SUMO (Simulation of Urban MObility) traffic simulator and the Veins vehicular network framework. The results validate the efficiency of the traffic detection system and its positive impact in detecting, reporting and rerouting traffic when traffic events occur.

Dimensional crossover in manganese based analogues of iron pnictides

Energy Technology Data Exchange (ETDEWEB)

Zingl, Manuel; Assmann, Elias; Aichhorn, Markus [University of Technology, Institute of Theoretical Physics and Computational Physics, Graz (Austria)

2016-07-01

The manganese pnicitides BaMn{sub 2}As{sub 2} and LaOMnAs crystallize in the same structure as the extensively studied iron pnictide high-temperature superconductors BaFe{sub 2}As{sub 2} and LaOFeAs. In contrast to the d{sup 6} configuration of the iron systems, the manganese d-shell is only half-filled (d{sup 5}). As a consequence, electronic correlations are much stronger, placing these compounds at the verge of the Mott metal-insulator transition. In this region of the phase diagram materials are prone to enhanced magnetism, apparent in the remarkably high Neel temperature of 625 K for BaMn{sub 2}As{sub 2}. We demonstrate that the experimentally observed differences in the Neel temperatures, the band gap, and the optical properties of the manganese compounds under consideration can be traced back to their effective dimensionality. Our fully charge self-consistent DFT+DMFT calculations show excellent agreement with experiments, especially measured optical spectra.

Quantum Mechanics at the Crossroads New Perspectives from History, Philosophy and Physics

CERN Document Server

Evans, James

2007-01-01

Quantum mechanics is a beautiful, strange and successful theory that originated in the 1920s. The theory, which Niels Bohr regarded as finished and complete, has in the last few decades rapidly developed in unexpected directions. An intense new focus on the stranger aspects of the theory, including entanglement and nonlocality, has resulted in new perceptions of the foundations of quantum mechanics, as well as surprising new exploitations of quantum phenomena. Historians and philosophers of science have also renewed their attention to quantum mechanics, opening up its human dimensions and asking searching questions about its meaning. This volume brings together new insights from different vantage points: Historians of physics, such as J. L. Heilbron; philosophers of science, such as Abner Shimony and Michel Bitbol; and quantum physicists, such as Wolfgang Ketterle and Roland Omnès, join forces to tackle essential questions in quantum mechanics and its interpretation. All the authors have written for a broad ...

La révélation des lois de la nature

CERN Document Server

Omnès, Roland

2008-01-01

Les lois de la nature sont-elles inventées par les scientifiques ? Ou sont-elles découvertes par eux ? Préexistent-elles dans la nature ? Ou lui sont-elles imposées ? L'enjeu est clair : la science va-t-elle détruire la nature ? Roland Omnès, l'un des maîtres de la physique théorique en France, montre dans cet essai que les lois de la nature ne sont ni inventées ni découvertes, mais révélées. Comme jadis Dieu s'est révélé à Moïse en lui donnant les Tables de la Loi, aujourd'hui la nature se révèle au physicien dans des formules mathématiques. Cette réflexion est menée au plus près d'une explication claire des lois de la physique. Un grand livre de science et de conscience.

Sub-10-micrometer toughening and crack tip toughness of dental enamel.

Science.gov (United States)

Ang, Siang Fung; Schulz, Anja; Pacher Fernandes, Rodrigo; Schneider, Gerold A

2011-04-01

In previous studies, enamel showed indications to occlude small cracks in-vivo and exhibited R-curve behaviors for bigger cracks ex-vivo. This study quantifies the crack tip's toughness (K(I0),K(III0)), the crack's closure stress and the cohesive zone size at the crack tip of enamel and investigates the toughening mechanisms near the crack tip down to the length scale of a single enamel crystallite. The crack-opening-displacement (COD) profile of cracks induced by Vickers indents on mature bovine enamel was studied using atomic force microscopy (AFM). The mode I crack tip toughness K(I0) of cracks along enamel rod boundaries and across enamel rods exhibit a similar range of values: K(I0,Ir)=0.5-1.6MPa m(0.5) (based on Irwin's 'near-field' solution) and K(I0,cz)=0.8-1.5MPa m(0.5) (based on the cohesive zone solution of the Dugdale-Muskhelishvili (DM) crack model). The mode III crack tip toughness K(III0,Ir) was computed as 0.02-0.15MPa m(0.5). The crack-closure stress at the crack tip was computed as 163-770 MPa with a cohesive zone length and width 1.6-10.1μm and 24-44 nm utilizing the cohesive zone solution. Toughening elements were observed under AFM and SEM: crack bridging due to protein ligament and hydroxyapatite fibres (micro- and nanometer scale) as well as microcracks were identified. Crown Copyright © 2010. Published by Elsevier Ltd. All rights reserved.

Andriaus Volano polemikos su antitrinitoriais raštai | Andreus Volanus’ works of polemics with non-trinitarianists

Directory of Open Access Journals (Sweden)

Gintarė Petuchovaitė

2012-01-01

Full Text Available The article analyzes the religious polemics of the evangelical reformer Andreas Volanus (about 1531 –1610 with non-Trinitarians in the second half of the sixteenth century. Three of A. Volanus’ writings: Epis­tola ad reverendissimum dominum Nicolaum Pacium Episcopum Kiioviensem ab Andrea Volano scripta, explicans controversiam his temporibus de S[ancta] Trinitate motam, ostendensq[ue] Patrem, Filium et Spiritum sanctum ut unius eiusdemq[ue] naturae sive essentiae, sic recte unum Deum dici, ad evitan­dam pluralitatem Deorum (1566, PARAENESIS ANDREAE VOLANI, AD OMNES IN REGNO PO­LONIAE MAGNOQUE DUCATU LITUANIAE, Samosatenianae vel Ebioniticae doctrinae professores: Eiusdemq[ue] ad nova Ebionitarum contra Paraenesin obiecta, Responsio (1582 and EPISTOLAE ALIQUOT AD REFELLENDUM DOCTRINAE SAMOSATINI­Anae errorem, ad astruendam Orthodoxam de Divina Trinitate sententiam, hoc tempore lectu non inutiles (1592 have been chosen as the working material. The author concludes that A. Volanus deconstructed the non-Trinitarian concept and substantiated the anti-Christianity of the radical Reformation tendency. He also contended that the Lithuanian Evangelical Reform is identical to the Swiss doctrine (Confessio helvetica posterior, 1566 and strengthened orthodoxy.

Neighbor Discovery Algorithm in Wireless Local Area Networks Using Multi-beam Directional Antennas

Science.gov (United States)

Wang, Jin; Peng, Wei; Liu, Song

2017-10-01

Neighbor discovery is an important step for Wireless Local Area Networks (WLAN) and the use of multi-beam directional antennas can greatly improve the network performance. However, most neighbor discovery algorithms in WLAN, based on multi-beam directional antennas, can only work effectively in synchronous system but not in asynchro-nous system. And collisions at AP remain a bottleneck for neighbor discovery. In this paper, we propose two asynchrono-us neighbor discovery algorithms: asynchronous hierarchical scanning (AHS) and asynchronous directional scanning (ADS) algorithm. Both of them are based on three-way handshaking mechanism. AHS and ADS reduce collisions at AP to have a good performance in a hierarchical way and directional way respectively. In the end, the performance of the AHS and ADS are tested on OMNeT++. Moreover, it is analyzed that different application scenarios and the factors how to affect the performance of these algorithms. The simulation results show that AHS is suitable for the densely populated scenes around AP while ADS is suitable for that most of the neighborhood nodes are far from AP.

Consistent Quantum Theory

Science.gov (United States)

Griffiths, Robert B.

2001-11-01

Quantum mechanics is one of the most fundamental yet difficult subjects in physics. Nonrelativistic quantum theory is presented here in a clear and systematic fashion, integrating Born's probabilistic interpretation with Schrödinger dynamics. Basic quantum principles are illustrated with simple examples requiring no mathematics beyond linear algebra and elementary probability theory. The quantum measurement process is consistently analyzed using fundamental quantum principles without referring to measurement. These same principles are used to resolve several of the paradoxes that have long perplexed physicists, including the double slit and Schrödinger's cat. The consistent histories formalism used here was first introduced by the author, and extended by M. Gell-Mann, J. Hartle and R. Omnès. Essential for researchers yet accessible to advanced undergraduate students in physics, chemistry, mathematics, and computer science, this book is supplementary to standard textbooks. It will also be of interest to physicists and philosophers working on the foundations of quantum mechanics. Comprehensive account Written by one of the main figures in the field Paperback edition of successful work on philosophy of quantum mechanics

Minimizing communication cost among distributed controllers in software defined networks

Science.gov (United States)

Arlimatti, Shivaleela; Elbreiki, Walid; Hassan, Suhaidi; Habbal, Adib; Elshaikh, Mohamed

2016-08-01

Software Defined Networking (SDN) is a new paradigm to increase the flexibility of today's network by promising for a programmable network. The fundamental idea behind this new architecture is to simplify network complexity by decoupling control plane and data plane of the network devices, and by making the control plane centralized. Recently controllers have distributed to solve the problem of single point of failure, and to increase scalability and flexibility during workload distribution. Even though, controllers are flexible and scalable to accommodate more number of network switches, yet the problem of intercommunication cost between distributed controllers is still challenging issue in the Software Defined Network environment. This paper, aims to fill the gap by proposing a new mechanism, which minimizes intercommunication cost with graph partitioning algorithm, an NP hard problem. The methodology proposed in this paper is, swapping of network elements between controller domains to minimize communication cost by calculating communication gain. The swapping of elements minimizes inter and intra communication cost among network domains. We validate our work with the OMNeT++ simulation environment tool. Simulation results show that the proposed mechanism minimizes the inter domain communication cost among controllers compared to traditional distributed controllers.

Formation of Mn3O4(001) on MnO(001): Surface and interface structural stability

International Nuclear Information System (INIS)

Bayer, Veronika; Podloucky, Raimund; Franchini, Cesare; Allegretti, Francesco; Xu, Bo; Parteder, Georg; Ramsey, Michael G.; Surnev, Svetlozar; Netzer, Falko P.

2007-01-01

X-ray absorption and photoemission spectroscopies, high-resolution electron energy loss spectroscopy, spot profile analysis low energy electron diffraction, and density functional theory calculations are employed to study the growth of (001) oriented Mn 3 O 4 surfaces on a Pd(100)-supported MnO(001) substrate, with the Hausmannite planar lattice constants aligned along the [110] direction of the underlying MnO(001) support. We show that despite the rather large lattice mismatch, abrupt interfaces may exist between rocksalt MnO and Hausmannite. We argue that this process is facilitated by the relatively low computed strain energy and we propose realistic models for the interface. An atop site registry between the Mn(O) atoms of the oxygen rich Mn 3 O 4 termination and the MnO(001) O(Mn) atoms underneath is found to be the energetically most favorable configuration. The significant planar expansion is accompanied by a large compression of the Mn 3 O 4 vertical lattice constant, yielding structural distortion of the O-Mn-O octahedral axis. Spot profile analysis low energy electron diffraction experiments show that the conversion reaction proceeds easily in both directions, thus indicating the reversible redox character of the transition

ESTUDIO TEÓRICO DEL EFECTO ISOTÓPICO DE HIDRÓGENO EN EL ADUCTO BORANO – CARBONILO.

Directory of Open Access Journals (Sweden)

Neftali Forero

2009-06-01

Full Text Available Hemos estudiado el efecto de la sustitución isotópica de hidrógeno sobre la geometría, la estructura electrónica y la estabilidad del aducto borano-carbonilo, mediante el método del orbital molecular núcleo-electrónico (OMNE implementado en el paquete computacional APMO. Se encontró que el aumento de la masa isotópica acorta las distancias de enlace boro-isótopo y carbono-oxígeno mientras que alarga la distancia boro-carbono. Se determinó además la estabilidad del aducto a partir de las energías de formación y las distancias de enlace B-C. Se encontró que el aumento de la masa isotópica debilita el enlace B-C. Una primera explicación de este fenómeno en términos del concepto de acidez de Lewis predijo resultados contrarios a los encontrados mientras que un modelo de reactividad basado en las diferencias de las energías de los orbitales LUMO del borano permitió dar cuenta de este efecto.

Tramas tróficas de peces de arrecifes en la región noroccidental de Cuba: I. Contenido estomacal

Directory of Open Access Journals (Sweden)

Ivet Hernández

2008-06-01

Full Text Available Se analizó el contenido estomacal de los peces arrecifales más abundantes de una zona del sublitoral rocoso de Ciudad de La Habana, desde octubre del 2004 hasta febrero del 2006. Para describir las dietas de las especies de peces carnívoras y omnívoras se empleó el índice de importancia relativa. Para los herbívoros y consumidores de esponjas se usó una modificación del método de abundancia relativa. La mayoría de las especies estudiadas son eurífagas y consumen principalmente otros peces y crustáceos bénticos.Trophic webs of reef fishes in northwestern Cuba. I. Stomach contents. Studies on the reef fishes of Cuba are not rare, but most have two basic limitations: small sample sizes and exclusion of small species. Our study sampled more species and larger samples in the sublitoral region of Havana city (23º7.587´ N, 82º25.793´ W, 2-18 m deep. We collected fish weekly from October 2004 through February 2006 with traps and harpoon. Overfishing has modified the fish communities. We used the relative importance index to describe the diets of carnivore and omnivore species, and a modification of the relative abundance method for the herbivores and sponge-eating species. The main food items are benthonic crustaceans (crabs, shrimp, copepods and bony fish (mainly demersal species. Most species are eurifagous and thus, less affected by anthropic disturbance than specialist feeders. Rev. Biol. Trop. 56 (2: 541-555. Epub 2008 June 30.

Magneto-caloric and magneto-resistive properties of La{sub 0.67}Ca{sub 0.33-x}Sr{sub x}MnO{sub 3}

Energy Technology Data Exchange (ETDEWEB)

Reves Dinesen, Anders

2004-08-01

This thesis presents results of an experimental investigation of magneto-caloric and magneto-resistive properties of a series of polycrystalline Ca- and Sr-doped lanthanum manganites, La{sub 0.67}Ca{sub 0.33-x}Sr{sub x}MnO{sub 3} (0{<=} x {<=} 0.33), with the perovskite structure. The samples consisted of sintered oxide powders prepared the glycine-nitrate combustion technique. The compounds were ferromagnetic and showed a Curie transition in the temperature range 267370 K (T{sub C} increased with increasing x). An analysis of the structural properties was carried out by means of x-ray diffraction and the Rietveld technique. The variation of the Ca/Sr ratio was found to cause a transition from orthorhombic to rhombohedral symmetry in the composition range 0.110 < x < 0.165. The analysis suggested a strong correlation between structural properties and magnetism, for instance a relationship between the mean MnOMn bond angle and the Curie temperature. The MnOMn bonds mediate ferromagnetism and electrical transport in these materials via the double-exchange mechanism. The magnetocaloric effect of the La{sub 0.67}Ca{sub 0.33-x}Sr{sub x}MnO{sub 3} samples was measured directly and indirectly (by means of magnetization measurements). All the samples showed a magnetocaloric effect in the vicinity of T{sub C}. A model for the mag-netocaloric effect based on Weiss mean field theory and classical theories for heat capacities was developed. The model provided reasonable predictions of the magneto-caloric properties of the samples. The compounds with low Sr content showed a magnetocaloric effect comparable to that of Gadolinium, the prototypical working material for magnetic refrigeration at room temperature. A less comprehensive part of the investigation regarded the magneto-resistive properties of the La{sub 0.67}Ca{sub 0.33-x}Sr{sub x}MnO{sub 3} system. It was found that th polycrystalline nature of the compounds played a decisive role for the magnetotransport properties

International Conference eXtended Discretization MethodS

CERN Document Server

Benvenuti, Elena

2016-01-01

This book gathers selected contributions on emerging research work presented at the International Conference eXtended Discretization MethodS (X-DMS), held in Ferrara in September 2015. It highlights the most relevant advances made at the international level in the context of expanding classical discretization methods, like finite elements, to the numerical analysis of a variety of physical problems. The improvements are intended to achieve higher computational efficiency and to account for special features of the solution directly in the approximation space and/or in the discretization procedure. The methods described include, among others, partition of unity methods (meshfree, XFEM, GFEM), virtual element methods, fictitious domain methods, and special techniques for static and evolving interfaces. The uniting feature of all contributions is the direct link between computational methodologies and their application to different engineering areas.

Method

Directory of Open Access Journals (Sweden)

Ling Fiona W.M.

2017-01-01

Full Text Available Rapid prototyping of microchannel gain lots of attention from researchers along with the rapid development of microfluidic technology. The conventional methods carried few disadvantages such as high cost, time consuming, required high operating pressure and temperature and involve expertise in operating the equipment. In this work, new method adapting xurography method is introduced to replace the conventional method of fabrication of microchannels. The novelty in this study is replacing the adhesion film with clear plastic film which was used to cut the design of the microchannel as the material is more suitable for fabricating more complex microchannel design. The microchannel was then mold using polymethyldisiloxane (PDMS and bonded with a clean glass to produce a close microchannel. The microchannel produced had a clean edge indicating good master mold was produced using the cutting plotter and the bonding between the PDMS and glass was good where no leakage was observed. The materials used in this method is cheap and the total time consumed is less than 5 hours where this method is suitable for rapid prototyping of microchannel.

Method Points: towards a metric for method complexity

Directory of Open Access Journals (Sweden)

Graham McLeod

1998-11-01

Full Text Available A metric for method complexity is proposed as an aid to choosing between competing methods, as well as in validating the effects of method integration or the products of method engineering work. It is based upon a generic method representation model previously developed by the author and adaptation of concepts used in the popular Function Point metric for system size. The proposed technique is illustrated by comparing two popular I.E. deliverables with counterparts in the object oriented Unified Modeling Language (UML. The paper recommends ways to improve the practical adoption of new methods.

Power Aware Simulation Framework for Wireless Sensor Networks and Nodes

Directory of Open Access Journals (Sweden)

Daniel Weber

2008-07-01

Full Text Available The constrained resources of sensor nodes limit analytical techniques and cost-time factors limit test beds to study wireless sensor networks (WSNs. Consequently, simulation becomes an essential tool to evaluate such systems.We present the power aware wireless sensors (PAWiS simulation framework that supports design and simulation of wireless sensor networks and nodes. The framework emphasizes power consumption capturing and hence the identification of inefficiencies in various hardware and software modules of the systems. These modules include all layers of the communication system, the targeted class of application itself, the power supply and energy management, the central processing unit (CPU, and the sensor-actuator interface. The modular design makes it possible to simulate heterogeneous systems. PAWiS is an OMNeT++ based discrete event simulator written in C++. It captures the node internals (modules as well as the node surroundings (network, environment and provides specific features critical to WSNs like capturing power consumption at various levels of granularity, support for mobility, and environmental dynamics as well as the simulation of timing effects. A module library with standardized interfaces and a power analysis tool have been developed to support the design and analysis of simulation models. The performance of the PAWiS simulator is comparable with other simulation environments.

Ontogenic changes in the feeding habits of the fishes Agonostomus monticola (Mugilidae and Brycon behreae (Characidae, Térraba River, Costa Rica

Directory of Open Access Journals (Sweden)

Thiago Cotta-Ribeiro

2009-11-01

Full Text Available Las dietas de los peces varían con respecto a la calidad, la cantidad y el tamaño del alimento. Esta variación puede deberse a factores como la estacionalidad y la fase del desarrollo del individuo. Estudiamos los cambios ontogénicos en los hábitos alimentarios de dos peces dulceacuícolas, Agonostomus monticola y Brycon behreae, de la Cuenca del Río Térraba, Pacífico sur de Costa Rica. Ambas poblaciones son omnívoras, pero con cambios ontogénicos en la cantidad y calidad de los ítemes consumidos. Conforme crecía, A. monticola modificó su dieta de insectívora hacia un mayor consumo de materia vegetal, asociado con un aumento en la longitud relativa del intestino. Aunque mantuvo su dependencia de alimentos vegetales, B. behreae diversificó su dieta de dos formas. Primero, pasó de partes suaves de plantas a semillas, hojas y frutos. Luego, los ítemes cambiaron de insectos hacia una dieta más carnívora (peces y camarones. Estos hallazgos para ambas especies enfatizan la importancia de proteger la vegetación riparia de estos ecosistemas tropicales.

Relativity of topology and dynamics

International Nuclear Information System (INIS)

Finkelstein, D.; Rodriguez, E.

1984-01-01

Recent developments in quantum set theory are used to formulate a program for quantum topological physics. The world is represented in Hilbert space whose psi vectors represent abstract complexes generated from the null set by one bracket operator and the usual Grassmann (or Clifford) product. Such a theory may be more basic than field theory, in that it may generate its own natural topology, time, kinematics and dynamics, without benefit of an absolute time-space dimension, topology, or Hamiltonian. For example there is a natural expression for the quantum gravitational field in terms of quantum topological operators. In such a theory the usual spectrum of possible dimensions describes only one of an indefinite hierarchy of levels, each with a similar spectrum, describing nonspatial infrastructure. While c simplices have no continuous symmetry, the q simplex has an orthogonal group (O(m,n). Because quantum theory cannot take the universe as physical system, a ''third relativity'' is proposed. The division between observer and observed is arbitrary. Then it is wrong to ask for ''the'' topology and dynamics of a system, in the same sense that it is wrong to ask for the ''the'' psi vectors of a system; topology and dynamics, like psi vectors, are not absolute but relative to the observer. (author)

BDF-methods

DEFF Research Database (Denmark)

Hostrup, Astrid Kuijers

1999-01-01

An introduction to BDF-methods is given. The use of these methods on differential algebraic equations (DAE's) with different indexes with respect to order, stability and convergens of the BDF-methods is presented.......An introduction to BDF-methods is given. The use of these methods on differential algebraic equations (DAE's) with different indexes with respect to order, stability and convergens of the BDF-methods is presented....

Methods for evaluating imaging methods of limited reproducibility

International Nuclear Information System (INIS)

Krummenauer, F.

2005-01-01

Just like new drugs, new or modified imaging methods must be subjected to objective clinical tests, including tests on humans. In this, it must be ensured that the principle of Good Clinical Practice (GCP) are followed with regard to medical, administrative and methodical quality. Innovative methods fo clinical epidemiology and medical biometry should be applied from the planning stage to the final statistical evaluation. The author presents established and new methods for planning, evaluation and reporting of clinical tests of diagnostic methods, and especially imaging methods, in clinical medicine and illustrates these by means of current research projects in the various medical disciplines. The strategies presented are summarized in a recommendation based on the concept of phases I - IV of clinical drug testing in order to enable standardisation of the clinical evaluation of imaging methods. (orig.)

Distillation methods

International Nuclear Information System (INIS)

Konecny, C.

1975-01-01

Two main methods of separation using the distillation method are given and evaluated, namely evaporation and distillation in carrier gas flow. Two basic apparatus are described for illustrating the methods used. The use of the distillation method in radiochemistry is documented by a number of examples of the separation of elements in elemental state, volatile halogenides and oxides. Tables give a survey of distillation methods used for the separation of the individual elements and give conditions under which this separation takes place. The suitability of the use of distillation methods in radiochemistry is discussed with regard to other separation methods. (L.K.)

Mining Method

Energy Technology Data Exchange (ETDEWEB)

Kim, Young Shik; Lee, Kyung Woon; Kim, Oak Hwan; Kim, Dae Kyung [Korea Institute of Geology Mining and Materials, Taejon (Korea, Republic of)

1996-12-01

The reducing coal market has been enforcing the coal industry to make exceptional rationalization and restructuring efforts since the end of the eighties. To the competition from crude oil and natural gas has been added the growing pressure from rising wages and rising production cost as the workings get deeper. To improve the competitive position of the coal mines against oil and gas through cost reduction, studies to improve mining system have been carried out. To find fields requiring improvements most, the technologies using in Tae Bak Colliery which was selected one of long running mines were investigated and analyzed. The mining method appeared the field needing improvements most to reduce the production cost. The present method, so-called inseam roadway caving method presently is using to extract the steep and thick seam. However, this method has several drawbacks. To solve the problems, two mining methods are suggested for a long term and short term method respectively. Inseam roadway caving method with long-hole blasting method is a variety of the present inseam roadway caving method modified by replacing timber sets with steel arch sets and the shovel loaders with chain conveyors. And long hole blasting is introduced to promote caving. And pillar caving method with chock supports method uses chock supports setting in the cross-cut from the hanging wall to the footwall. Two single chain conveyors are needed. One is installed in front of chock supports to clear coal from the cutting face. The other is installed behind the supports to transport caved coal from behind. This method is superior to the previous one in terms of safety from water-inrushes, production rate and productivity. The only drawback is that it needs more investment. (author). 14 tabs., 34 figs.

Perturbation methods

CERN Document Server

Nayfeh, Ali H

2008-01-01

1. Introduction 1 2. Straightforward Expansions and Sources of Nonuniformity 23 3. The Method of Strained Coordinates 56 4. The Methods of Matched and Composite Asymptotic Expansions 110 5. Variation of Parameters and Methods of Averaging 159 6. The Method of Multiple Scales 228 7. Asymptotic Solutions of Linear Equations 308 References and Author Index 387 Subject Index 417

A Novel Polygonal Finite Element Method: Virtual Node Method

Science.gov (United States)

Tang, X. H.; Zheng, C.; Zhang, J. H.

2010-05-01

Polygonal finite element method (PFEM), which can construct shape functions on polygonal elements, provides greater flexibility in mesh generation. However, the non-polynomial form of traditional PFEM, such as Wachspress method and Mean Value method, leads to inexact numerical integration. Since the integration technique for non-polynomial functions is immature. To overcome this shortcoming, a great number of integration points have to be used to obtain sufficiently exact results, which increases computational cost. In this paper, a novel polygonal finite element method is proposed and called as virtual node method (VNM). The features of present method can be list as: (1) It is a PFEM with polynomial form. Thereby, Hammer integral and Gauss integral can be naturally used to obtain exact numerical integration; (2) Shape functions of VNM satisfy all the requirements of finite element method. To test the performance of VNM, intensive numerical tests are carried out. It found that, in standard patch test, VNM can achieve significantly better results than Wachspress method and Mean Value method. Moreover, it is observed that VNM can achieve better results than triangular 3-node elements in the accuracy test.

The influence of jaw's curvature on the results of the Brazilian disc test

Directory of Open Access Journals (Sweden)

Ch.F. Markides

2016-04-01

Full Text Available The general contact problem of a disc squeezed between jaws of arbitrary curvature is considered employing Muskhelishvili's complex potentials. Taking advantage of the general solution introduced, the closed-form expressions for the stresses along strategic loci (loaded rim, loaded diameter, disc's center are obtained, in terms of the ratio ρ of the disc's to the jaw's curvature. Then, the effect of ρ (as well as that of the relative stiffness of the disc's and jaw's materials dictating the contact arc on the stress distribution along these loci is explored. It is concluded that, for both smooth contact (zero friction and contact with friction, the role of the jaw's curvature is significant not only along the disc-jaw contact arc (as it could be expected, but also all along the loaded diameter. On the other hand, it is indicated that the stress field at the disc's center is more or less insensitive to the jaw's curvature assuming that ρ lies within the range (0, 0.67 or in other words within the limits defined by the two standardized suggestions, i.e. that of American Society for Testing and Materials (ASTM (plane loading platens with ρ = 0 and that of International Society for Rock Mechanics (ISRM (curved jaws with ρ = 0.67. The upper limit of this range is a kind of compromise between the need to make the stress field at the disc's center independent of the boundary conditions while keeping at the same time the contact angle large enough to reduce the stress concentration and the risk for premature fracture initiation far from the disc's center. For jaws with radius of curvature exceeded by that suggested by ISRM, the stress field at the disc's center is significantly influenced. Especially for jaws with radius approaching that of the disc, the stress field at the disc's center is dramatically distorted rendering Hondros' formula inapplicable and the test results erroneous.

Method Engineering: Engineering of Information Systems Development Methods and Tools

NARCIS (Netherlands)

Brinkkemper, J.N.; Brinkkemper, Sjaak

1996-01-01

This paper proposes the term method engineering for the research field of the construction of information systems development methods and tools. Some research issues in method engineering are identified. One major research topic in method engineering is discussed in depth: situational methods, i.e.

Enhancing the (MSLDIP) image steganographic method (ESLDIP method)

Science.gov (United States)

Seddik Saad, Al-hussien

2011-10-01

Message transmissions over the Internet still have data security problem. Therefore, secure and secret communication methods are needed for transmitting messages over the Internet. Cryptography scrambles the message so that it cannot be understood. However, it makes the message suspicious enough to attract eavesdropper's attention. Steganography hides the secret message within other innocuous-looking cover files (i.e. images, music and video files) so that it cannot be observed [1].The term steganography originates from the Greek root words "steganos'' and "graphein'' which literally mean "covered writing''. It is defined as the science that involves communicating secret data in an appropriate multimedia carrier, e.g., image, audio text and video files [3].Steganographic techniques allow one party to communicate information to another without a third party even knowing that the communication is occurring. The ways to deliver these "secret messages" vary greatly [3].Our proposed method called Enhanced SLDIP (ESLDIP). In which the maximmum hiding capacity (MHC) of proposed ESLDIP method is higher than the previously proposed MSLDIP methods and the PSNR of the ESLDIP method is higher than the MSLDIP PSNR values', which means that the image quality of the ESLDIP method will be better than MSLDIP method and the maximmum hiding capacity (MHC) also improved. The rest of this paper is organized as follows. In section 2, steganography has been discussed; lingo, carriers and types. In section 3, related works are introduced. In section 4, the proposed method will be discussed in details. In section 5, the simulation results are given and Section 6 concludes the paper.

Method Engineering: Engineering of Information Systems Development Methods and Tools

OpenAIRE

Brinkkemper, J.N.; Brinkkemper, Sjaak

1996-01-01

This paper proposes the term method engineering for the research field of the construction of information systems development methods and tools. Some research issues in method engineering are identified. One major research topic in method engineering is discussed in depth: situational methods, i.e. the configuration of a project approach that is tuned to the project at hand. A language and support tool for the engineering of situational methods are discussed.

Numerical Methods for Stochastic Computations A Spectral Method Approach

CERN Document Server

Xiu, Dongbin

2010-01-01

The first graduate-level textbook to focus on fundamental aspects of numerical methods for stochastic computations, this book describes the class of numerical methods based on generalized polynomial chaos (gPC). These fast, efficient, and accurate methods are an extension of the classical spectral methods of high-dimensional random spaces. Designed to simulate complex systems subject to random inputs, these methods are widely used in many areas of computer science and engineering. The book introduces polynomial approximation theory and probability theory; describes the basic theory of gPC meth

Mining method selection by integrated AHP and PROMETHEE method.

Science.gov (United States)

Bogdanovic, Dejan; Nikolic, Djordje; Ilic, Ivana

2012-03-01

Selecting the best mining method among many alternatives is a multicriteria decision making problem. The aim of this paper is to demonstrate the implementation of an integrated approach that employs AHP and PROMETHEE together for selecting the most suitable mining method for the "Coka Marin" underground mine in Serbia. The related problem includes five possible mining methods and eleven criteria to evaluate them. Criteria are accurately chosen in order to cover the most important parameters that impact on the mining method selection, such as geological and geotechnical properties, economic parameters and geographical factors. The AHP is used to analyze the structure of the mining method selection problem and to determine weights of the criteria, and PROMETHEE method is used to obtain the final ranking and to make a sensitivity analysis by changing the weights. The results have shown that the proposed integrated method can be successfully used in solving mining engineering problems.

A Pattern-Oriented Approach to a Methodical Evaluation of Modeling Methods

Directory of Open Access Journals (Sweden)

Michael Amberg

1996-11-01

Full Text Available The paper describes a pattern-oriented approach to evaluate modeling methods and to compare various methods with each other from a methodical viewpoint. A specific set of principles (the patterns is defined by investigating the notations and the documentation of comparable modeling methods. Each principle helps to examine some parts of the methods from a specific point of view. All principles together lead to an overall picture of the method under examination. First the core ("method neutral" meaning of each principle is described. Then the methods are examined regarding the principle. Afterwards the method specific interpretations are compared with each other and with the core meaning of the principle. By this procedure, the strengths and weaknesses of modeling methods regarding methodical aspects are identified. The principles are described uniformly using a principle description template according to descriptions of object oriented design patterns. The approach is demonstrated by evaluating a business process modeling method.

Maintenance methods

International Nuclear Information System (INIS)

Sanchis, H.; Aucher, P.

1990-01-01

The maintenance method applied at the Hague is summarized. The method was developed in order to solve problems relating to: the different specialist fields, the need for homogeneity in the maintenance work, the equipment diversity, the increase of the materials used at the Hague's new facilities. The aim of the method is to create a knowhow formalism, to facilitate maintenance, to ensure the running of the operations and to improve the estimation of the maintenance cost. One of the method's difficulties is the demonstration of the profitability of the maintenance operations [fr

BASIC METHODS OF CLASSIFICATION AND CHARACTERISTICS OF METHODS OF PRICING IN UKRAINE

Directory of Open Access Journals (Sweden)

A. Boguslavskiy

2014-12-01

Full Text Available The article provided definitions and shows the need to use different methods of pricing of enterprises. Exposed the reasons of the absence of a universal classification of pricing methods. The approaches of different authors to classify groups of pricing methods: 1 the cost method; 2 methods with a focus on competition; 3 methods for pricing based on demand, 4 pricing with a focus on maximum profit, 5 parametric methods, 6 pricing under risk and uncertainty, etc. An improved classification pricing methods with the release of the following groups: 1 the methods of cost pricing; 2 methods based on demand; 3 methods, based on competition; 4 microeconomic methods; 5 methods which are based on product life cycles; 6 methods, depending on economic conditions; 7 econometric and statistical techniques 8 Methods of transfer pricing; 9 methods in accordance with the terms of agreements; 10 Methods of assortment pricing; 11 combined methods of pricing and so on. The basic directions of use of combined methods of pricing and analysis of their possible use in Ukraine are shown.

Comparative law as method and the method of comparative law

NARCIS (Netherlands)

Hage, J.C.; Adams, M.; Heirbaut, D.

2014-01-01

This article addresses both the justificatory role of comparative law within legal research (comparative law as method) and the method of comparative law itself. In this connection two questions will be answered: 1. Is comparative law a method, or a set of methods, for legal research? 2. Does

Safety training for working youth: Methods used versus methods wanted.

Science.gov (United States)

Zierold, Kristina M

2016-04-07

Safety training is promoted as a tool to prevent workplace injury; however, little is known about the safety training experiences young workers get on-the-job. Furthermore, nothing is known about what methods they think would be the most helpful for learning about safe work practices. To compare safety training methods teens get on the job to those safety training methods teens think would be the best for learning workplace safety, focusing on age differences. A cross-sectional survey was administered to students in two large high schools in spring 2011. Seventy percent of working youth received safety training. The top training methods that youth reported getting at work were safety videos (42%), safety lectures (25%), and safety posters/signs (22%). In comparison to the safety training methods used, the top methods youth wanted included videos (54%), hands-on (47%), and on-the-job demonstrations (34%). This study demonstrated that there were differences in training methods that youth wanted by age; with older youth seemingly wanting more independent methods of training and younger teens wanting more involvement. Results indicate that youth want methods of safety training that are different from what they are getting on the job. The differences in methods wanted by age may aid in developing training programs appropriate for the developmental level of working youth.

The Monte Carlo method the method of statistical trials

CERN Document Server

Shreider, YuA

1966-01-01

The Monte Carlo Method: The Method of Statistical Trials is a systematic account of the fundamental concepts and techniques of the Monte Carlo method, together with its range of applications. Some of these applications include the computation of definite integrals, neutron physics, and in the investigation of servicing processes. This volume is comprised of seven chapters and begins with an overview of the basic features of the Monte Carlo method and typical examples of its application to simple problems in computational mathematics. The next chapter examines the computation of multi-dimensio

Catalysts, methods of making catalysts, and methods of use

KAUST Repository

Renard, Laetitia; El Eter, Mohamad; Caps, Valerie; Basset, Jean-Marie

2014-01-01

Embodiments of the present disclosure provide for catalysts, methods of making catalysts, methods of using catalysts, and the like. In an embodiment, the method of making the catalysts can be performed in a single step with a metal nanoparticle precursor and a metal oxide precursor, where a separate stabilizing agent is not needed.

Catalysts, methods of making catalysts, and methods of use

KAUST Repository

Renard, Laetitia

2014-03-06

Embodiments of the present disclosure provide for catalysts, methods of making catalysts, methods of using catalysts, and the like. In an embodiment, the method of making the catalysts can be performed in a single step with a metal nanoparticle precursor and a metal oxide precursor, where a separate stabilizing agent is not needed.

A comparison of Ki-67 counting methods in luminal Breast Cancer: The Average Method vs. the Hot Spot Method.

Science.gov (United States)

Jang, Min Hye; Kim, Hyun Jung; Chung, Yul Ri; Lee, Yangkyu; Park, So Yeon

2017-01-01

In spite of the usefulness of the Ki-67 labeling index (LI) as a prognostic and predictive marker in breast cancer, its clinical application remains limited due to variability in its measurement and the absence of a standard method of interpretation. This study was designed to compare the two methods of assessing Ki-67 LI: the average method vs. the hot spot method and thus to determine which method is more appropriate in predicting prognosis of luminal/HER2-negative breast cancers. Ki-67 LIs were calculated by direct counting of three representative areas of 493 luminal/HER2-negative breast cancers using the two methods. We calculated the differences in the Ki-67 LIs (ΔKi-67) between the two methods and the ratio of the Ki-67 LIs (H/A ratio) of the two methods. In addition, we compared the performance of the Ki-67 LIs obtained by the two methods as prognostic markers. ΔKi-67 ranged from 0.01% to 33.3% and the H/A ratio ranged from 1.0 to 2.6. Based on the receiver operating characteristic curve method, the predictive powers of the KI-67 LI measured by the two methods were similar (Area under curve: hot spot method, 0.711; average method, 0.700). In multivariate analysis, high Ki-67 LI based on either method was an independent poor prognostic factor, along with high T stage and node metastasis. However, in repeated counts, the hot spot method did not consistently classify tumors into high vs. low Ki-67 LI groups. In conclusion, both the average and hot spot method of evaluating Ki-67 LI have good predictive performances for tumor recurrence in luminal/HER2-negative breast cancers. However, we recommend using the average method for the present because of its greater reproducibility.

A comparison of Ki-67 counting methods in luminal Breast Cancer: The Average Method vs. the Hot Spot Method.

Directory of Open Access Journals (Sweden)

Min Hye Jang

Full Text Available In spite of the usefulness of the Ki-67 labeling index (LI as a prognostic and predictive marker in breast cancer, its clinical application remains limited due to variability in its measurement and the absence of a standard method of interpretation. This study was designed to compare the two methods of assessing Ki-67 LI: the average method vs. the hot spot method and thus to determine which method is more appropriate in predicting prognosis of luminal/HER2-negative breast cancers. Ki-67 LIs were calculated by direct counting of three representative areas of 493 luminal/HER2-negative breast cancers using the two methods. We calculated the differences in the Ki-67 LIs (ΔKi-67 between the two methods and the ratio of the Ki-67 LIs (H/A ratio of the two methods. In addition, we compared the performance of the Ki-67 LIs obtained by the two methods as prognostic markers. ΔKi-67 ranged from 0.01% to 33.3% and the H/A ratio ranged from 1.0 to 2.6. Based on the receiver operating characteristic curve method, the predictive powers of the KI-67 LI measured by the two methods were similar (Area under curve: hot spot method, 0.711; average method, 0.700. In multivariate analysis, high Ki-67 LI based on either method was an independent poor prognostic factor, along with high T stage and node metastasis. However, in repeated counts, the hot spot method did not consistently classify tumors into high vs. low Ki-67 LI groups. In conclusion, both the average and hot spot method of evaluating Ki-67 LI have good predictive performances for tumor recurrence in luminal/HER2-negative breast cancers. However, we recommend using the average method for the present because of its greater reproducibility.

Radiochemistry methods in DOE methods for evaluating environmental and waste management samples

International Nuclear Information System (INIS)

Fadeff, S.K.; Goheen, S.C.

1994-08-01

Current standard sources of radiochemistry methods are often inappropriate for use in evaluating US Department of Energy environmental and waste management (DOE/EW) samples. Examples of current sources include EPA, ASTM, Standard Methods for the Examination of Water and Wastewater and HASL-300. Applicability of these methods is limited to specific matrices (usually water), radiation levels (usually environmental levels), and analytes (limited number). Radiochemistry methods in DOE Methods for Evaluating Environmental and Waste Management Samples (DOE Methods) attempt to fill the applicability gap that exists between standard methods and those needed for DOE/EM activities. The Radiochemistry chapter in DOE Methods includes an ''analysis and reporting'' guidance section as well as radiochemistry methods. A basis for identifying the DOE/EM radiochemistry needs is discussed. Within this needs framework, the applicability of standard methods and targeted new methods is identified. Sources of new methods (consolidated methods from DOE laboratories and submissions from individuals) and the methods review process will be discussed. The processes involved in generating consolidated methods add editing individually submitted methods will be compared. DOE Methods is a living document and continues to expand by adding various kinds of methods. Radiochemistry methods are highlighted in this paper. DOE Methods is intended to be a resource for methods applicable to DOE/EM problems. Although it is intended to support DOE, the guidance and methods are not necessarily exclusive to DOE. The document is available at no cost through the Laboratory Management Division of DOE, Office of Technology Development

METHODS IN THE POST-METHODS ERA. REPORT ON AN INTERNATIONAL SURVEY ON LANGUAGE TEACHING METHODS'

Directory of Open Access Journals (Sweden)

Jun Liu

2004-06-01

Full Text Available Do methods still have a place in 21" century language teaching? To answer this question, an international survey was conducted in the surnmer of 1999. A sample of 800 language teachers world-wide randomly drawn from 17,800 TESOLers were each given a 2-page survey. The return rate was 58.5% with the actual usable data set of448, which was analyzed by using both descriptive and inferential statistics. Among the ten commonly recognized teaching methods surveyed, both the Communicative Language Teaching Approach and an eclectic method seem to have the highest rate in familiarity, preference, and use. But when multiple factors, such as teaching contexts, instructional settings, learners' proficiency levels, class size, teaching experience and educational backgrounds of the teachers, and the status of being a native or nonnative English speaking professional were taken into consideration, various patterns and themes emerged. One interesting finding is that Grammar Translation is still used in EFL contexts, in larger classes, and with learners at low proficiency levels, though the ratio between the actual use of this method and teachers' preference does not match. Based on the results of the survey, a new theoretical framework is proposed to conceptualize language teaching methods in the post-methods era.

A nodal method based on matrix-response method

International Nuclear Information System (INIS)

Rocamora Junior, F.D.; Menezes, A.

1982-01-01

A nodal method based in the matrix-response method, is presented, and its application to spatial gradient problems, such as those that exist in fast reactors, near the core - blanket interface, is investigated. (E.G.) [pt

Primer registro de artropodofauna cadavérica en sustratos humanos y animales en San Juan, Argentina

Directory of Open Access Journals (Sweden)

Fernando H. ABALLAY

2008-01-01

Full Text Available En el presente trabajo se estudiaron los artrópodos carroñeros que acudieron a cadáveres de vertebrados al aire libre en la provincia de San Juan, Argentina. El objetivo fue inventariar la composición específica de la artropodofauna cadavérica, asociada a diferentes sustratos de vertebrados en descomposición. Se colectaron muestras de artrópodos sobre restos animales y humanos en condiciones de campo y sobre cadáveres de cerdos domésticos colocados al aire libre bajo condiciones controladas. Se registraron, por primera vez para la provincia de San Juan, 40 especies de artropodofauna tanatológica incluidas en cuatro órdenes y 15 familias. Se incorpora, como primera cita para la fauna forense argentina, un necrófago: Megelenophorus americanus Lacordaire (Coleoptera: Tenebrionidae, y tres necrófilas: Polybia ruficeps Schrottky (Hymenoptera: Vespidae, Pheidole bergi Mayr (Hymenoptera, Formicidae, Myrmicinae y Ectatomma brunneum Smith (Hymenoptera, Formicidae, Ponerinae. Se citan 18 especies necrófagas, 18 necrófilas, una omnívora y seis oportunistas sobre siete diferentes sustratos cadavéricos de vertebrados. Se brindan nuevos registros de distribución de 18 especies de insectos. Se confirma la estacionalidad invernal de Callíphora vicina Robineau-Desvoidy (Diptera: Calliphoridae.

Approximation properties of haplotype tagging

Directory of Open Access Journals (Sweden)

Dreiseitl Stephan

2006-01-01

Full Text Available Abstract Background Single nucleotide polymorphisms (SNPs are locations at which the genomic sequences of population members differ. Since these differences are known to follow patterns, disease association studies are facilitated by identifying SNPs that allow the unique identification of such patterns. This process, known as haplotype tagging, is formulated as a combinatorial optimization problem and analyzed in terms of complexity and approximation properties. Results It is shown that the tagging problem is NP-hard but approximable within 1 + ln((n2 - n/2 for n haplotypes but not approximable within (1 - ε ln(n/2 for any ε > 0 unless NP ⊂ DTIME(nlog log n. A simple, very easily implementable algorithm that exhibits the above upper bound on solution quality is presented. This algorithm has running time O((2m - p + 1 ≤ O(m(n2 - n/2 where p ≤ min(n, m for n haplotypes of size m. As we show that the approximation bound is asymptotically tight, the algorithm presented is optimal with respect to this asymptotic bound. Conclusion The haplotype tagging problem is hard, but approachable with a fast, practical, and surprisingly simple algorithm that cannot be significantly improved upon on a single processor machine. Hence, significant improvement in computatational efforts expended can only be expected if the computational effort is distributed and done in parallel.

Environmental radioactivity and chemical composition of different types of bee honeys produced at in-house area, egypt

International Nuclear Information System (INIS)

Ramadan, A.B.

2005-01-01

Environmental radioactivity and chemical composition of bee honey varies with the surrounding environment (major floral and soil contamination), which reflects the nutritional value of honey. 23SU, 232Th, 40K, >37Cs, major elements Na, K, Mg and Cl and trace elements Mn, Fe, Zn, F, I, Cu, Co, Ni and Sr as well as toxic elements Cd and Pb -were all determined in different types of bee honey, which include non-floral honey with artificial feeding (syrup-feed honey) and mono-floral honeys (clover honey or sesame honey or orange honey). These elements were also determined in the bee feeds, which include flowers (clover, sesame and orange) and syrup. The results revealed that of all types of honeys and syrup-feed honey exhibited higher natural radioactivity and higher concentrations ofNa, K, Mg, Cl, oMn, Fe, Co, Cd and Pb than in the other honeys. Orange honey contained the lowest natural radioactivity and element concentrations. Clover honey had the lowest toxic element Cd and Pb concentrations (0.02 and 4.2/xg/g, respectively) while sesame honey contained the highest levels of Cd and F (0.7 and 12.9 /ig/g, respectively). Statistical analysis revealed significant correlation between honey and the feed (R= 0.745 to 0.921). Environmental radioactivity and element concentrations in the honey under study were in the safety baseline levels for human consumption

Temporal variability (1997-2015) of trophic fish guilds and its relationships with El Niño events in a subtropical estuary

Science.gov (United States)

Possamai, Bianca; Vieira, João P.; Grimm, Alice M.; Garcia, Alexandre M.

2018-03-01

Global climatic phenomena like El Niño events are known to alter hydrological cycles and local abiotic conditions leading to changes in structure and dynamics of terrestrial and aquatic biological communities worldwide. Based on a long-term (19 years) standardized sampling of shallow water estuarine fishes, this study investigated the temporal variability in composition and dominance patterns of trophic guilds in a subtropical estuary (Patos Lagoon estuary, Southern Brazil) and their relationship with local and regional driving forces associated with moderate (2002-2003 and 2009-2010) and very strong (1997-1998 and 2015-2016) El Niño events. Fish species were classified into eight trophic guilds (DTV detritivore, HVP herbivore-phytoplankton, HVM macroalgae herbivore, ISV insectivore, OMN omnivore, PSV piscivore, ZBV zoobenthivore and ZPL zooplanktivore) and their abundances were correlated with environmental factors. Canonical correspondence analysis revealed that less dominant (those comprising water transparency occurring mostly during non-El Niño conditions. In contrast, ZBV's abundance was not correlated with contrasting environmental conditions, but rather, had higher association with samples characterized by intermediate environmental values. Overall, these findings show that moderate and very strong El Niño events did not substantially disrupt the dominance patterns among trophic fish guilds in the estuary. Rather, they increased trophic estuarine diversity by flushing freshwater fishes with distinct feeding habits into the estuary.

A Monte Carlo method and finite volume method coupled optical simulation method for parabolic trough solar collectors

International Nuclear Information System (INIS)

Liang, Hongbo; Fan, Man; You, Shijun; Zheng, Wandong; Zhang, Huan; Ye, Tianzhen; Zheng, Xuejing

2017-01-01

Highlights: •Four optical models for parabolic trough solar collectors were compared in detail. •Characteristics of Monte Carlo Method and Finite Volume Method were discussed. •A novel method was presented combining advantages of different models. •The method was suited to optical analysis of collectors with different geometries. •A new kind of cavity receiver was simulated depending on the novel method. -- Abstract: The PTC (parabolic trough solar collector) is widely used for space heating, heat-driven refrigeration, solar power, etc. The concentrated solar radiation is the only energy source for a PTC, thus its optical performance significantly affects the collector efficiency. In this study, four different optical models were constructed, validated and compared in detail. On this basis, a novel coupled method was presented by combining advantages of these models, which was suited to carry out a mass of optical simulations of collectors with different geometrical parameters rapidly and accurately. Based on these simulation results, the optimal configuration of a collector with highest efficiency can be determined. Thus, this method was useful for collector optimization and design. In the four models, MCM (Monte Carlo Method) and FVM (Finite Volume Method) were used to initialize photons distribution, as well as CPEM (Change Photon Energy Method) and MCM were adopted to describe the process of reflecting, transmitting and absorbing. For simulating reflection, transmission and absorption, CPEM was more efficient than MCM, so it was utilized in the coupled method. For photons distribution initialization, FVM saved running time and computation effort, whereas it needed suitable grid configuration. MCM only required a total number of rays for simulation, whereas it needed higher computing cost and its results fluctuated in multiple runs. In the novel coupled method, the grid configuration for FVM was optimized according to the “true values” from MCM of

Tuning the magnetocaloric properties of La0.7Ca0.3MnO3 manganites through Ni-doping

Science.gov (United States)

Gómez, A.; Chavarriaga, E.; Supelano, I.; Parra, C. A.; Morán, O.

2018-04-01

The effect of Ni2+ doping on the magnetic and magnetocaloric properties of La0.7Ca0.3MnO3 manganites synthesized via the auto-combustion method is reported. The aim of studying Ni2+-substituted La0.7Ca0.3Mn1 - xNixO3 (x = 0 , 0.02 , 0.07, and 0.1) manganites was to explore the possibility of increasing the operating temperature range for the magnetocaloric effect through tuning of the magnetic transition temperature. X-ray diffraction analysis confirmed the phase purity of the synthesized samples. The substitution of Mn3+ ions by Ni2+ ions in the La0.7Ca0.3MnO3 lattice was also corroborated through this technique. The dependence of the magnetization on the temperature reveals that all the compositions exhibit a well-defined ferromagnetic to paramagnetic transition near the Curie temperature. A systematic decrease in the values of the Curie temperature is clearly observed upon Ni2+ doping. Probably the replacement of Mn3+ by Ni2+ ions in the La0.7Ca0.3MnO3 lattice weakens the Mn3+-O-Mn4+ double exchange interaction, which leads to a decrease in the transition temperature and the magnetic moment in the samples. By using Arrott plots, it was found that the phase transition from ferromagnetic to paramagnetic is second order. The maximum magnetic entropy changes observed for the x = 0 , 0.02 , 0.07, and 0.1 composites was 0.85, 0.77, 0.63, and 0.59 J/kg K, respectively, under a magnetic field of 1.5 T. In general, it was verified that the magnetic entropy change achieved for La0.7Ca0.3Mn1 - xNixO3 manganites synthesized via the auto-combustion method is higher than those reported for other manganites with comparable Ni2+-doping levels synthesized via standard solid state reaction. The addition of Ni2+ increases the value of the relative cooling power as compared to that of the parent compound. The highest value of this parameter (∼60 J/kg) is found for a Ni-doping level of 2% around 230 K in a field of 1.5 T.

تاثير تمرينات خاصة في تطوير اهم القدرات الحركية والتصور العقلي وبعض المهارات الاساسية للناشئين بكرة القدم

Directory of Open Access Journals (Sweden)

باسم خضير عباس

2017-03-01

Full Text Available The first sports training stages of great importance because it is the bedrock for the subsequent stages of training. The numbers skills and one of the most important training objectives in the first years of training where the acquisition of basic skills and access performance to advanced levels of proficiency goal of training and requires a high level of motor capacity of up to advanced stages of maturity and sophistication in this Alamrah.omn stage through the fact that the researcher a player and coach noted vulnerable interest in the training of motor abilities and mental capacities and lack of training methods used by trained commensurate with their importance in the development of basic skills performance among young football players. So felt a private investigator to use exercises to develop these abilities and mental visualization exercises and the most important basic skills of junior football to be effective means of training used by trainers. The goal of your search: 1.\tThe use of special exercises for the development of the most important motor abilities and mental perception and some basic skills of junior football. 2. know the effect of exercise in Ttoriham own motor capacity and mental perception and some basic skills of junior football. The researcher used the experimental method for suitability and the nature of research and the fact that this approach is characterized by its results accurately, the researcher followed the experimental design a Almtkavitan groups with pretest and posttest. Identify community Find junior players in Baquba Club's (35 were selected randomly sample, amounting to (28 players. It was divided into two groups (control group and experimental .ccant main conclusions are: 1. The training curriculum followed by coach a positive influence in the development of motor and mental capacity perception and the basic skills of young football players. 2. For the best exercises for the effect of the experimental

Projection Methods

DEFF Research Database (Denmark)

Wagner, Falko Jens; Poulsen, Mikael Zebbelin

1999-01-01

When trying to solve a DAE problem of high index with more traditional methods, it often causes instability in some of the variables, and finally leads to breakdown of convergence and integration of the solution. This is nicely shown in [ESF98, p. 152 ff.].This chapter will introduce projection...... methods as a way of handling these special problems. It is assumed that we have methods for solving normal ODE systems and index-1 systems....

Method Mixins

DEFF Research Database (Denmark)

Ernst, Erik

2005-01-01

The world of programming has been conquered by the procedure call mechanism, including object-oriented method invocation which is a procedure call in context of an object. This paper presents an alternative, method mixin invocations, that is optimized for flexible creation of composite behavior, ...... the call stack, e.g., to a callee's callee. The mechanism has been implemented in the programming language gbeta. Variants of the mechanism could be added to almost any imperative programming language.......The world of programming has been conquered by the procedure call mechanism, including object-oriented method invocation which is a procedure call in context of an object. This paper presents an alternative, method mixin invocations, that is optimized for flexible creation of composite behavior...

["adeste omnes Logicae et Mathematicae Musae". Johannes Broscius's Apology of Aristotle and Euclid (1652) and the issue of anti-Ramism at the Academy of Cracow].

Science.gov (United States)

Choptiany, Michał

2014-01-01

This article discusses a largely overlooked aspect of the last work by Johannes Broscius (1585 - 1652), his Apologia pro Aristotele et Euclide contra Petrum Ramum et alios of 1652. While the past researchers focused their attention on the evaluation of Broscius's contribution to mathematics, geometry in particular, they ignored the socio-scientific aspect of his work, that is the way Peter Ramus and his followers have been presented and how did the dark legend of Ramus have been thus revived at the Central-European university in the middle of 17th century. I am showing types of rhetorical arguments employed by Broscius and analyse the way he portrayed Ramus and depicted events related to the reception of Ramism at the Academy of Cracow. The article is followed by an appendix which contains a critical edition of excerpts from the manuscript rough draft of Apologia which has been preserved until nowadays (Jagiellonian Library MS. 3205 I). In the apparatus I identify the references and show how Broscius rewrote and rearranged the original paragraphs of his anti-Ramist work.

Mimetic discretization methods

CERN Document Server

Castillo, Jose E

2013-01-01

To help solve physical and engineering problems, mimetic or compatible algebraic discretization methods employ discrete constructs to mimic the continuous identities and theorems found in vector calculus. Mimetic Discretization Methods focuses on the recent mimetic discretization method co-developed by the first author. Based on the Castillo-Grone operators, this simple mimetic discretization method is invariably valid for spatial dimensions no greater than three. The book also presents a numerical method for obtaining corresponding discrete operators that mimic the continuum differential and

Discipline methods

OpenAIRE

Maria Kikila; Ioannis Koutelekos

2012-01-01

Child discipline is one of the most important elements of successful parenting. As discipline is defined the process that help children to learn appropriate behaviors and make good choices. Aim: The aim of the present study was to review the literature about the discipline methods. The method οf this study included bibliography research from both the review and the research literature, mainly in the pubmed data base which referred to the discipline methods. Results: In the literature it is ci...

Method Mixins

DEFF Research Database (Denmark)

Ernst, Erik

2002-01-01

invocation is optimized for as-is reuse of existing behavior. Tight coupling reduces flexibility, and traditional invocation tightly couples transfer of information and transfer of control. Method mixins decouple these two kinds of transfer, thereby opening the doors for new kinds of abstraction and reuse......The procedure call mechanism has conquered the world of programming, with object-oriented method invocation being a procedure call in context of an object. This paper presents an alternative, method mixin invocations, that is optimized for flexible creation of composite behavior, where traditional....... Method mixins use shared name spaces to transfer information between caller and callee, as opposed to traditional invocation which uses parameters and returned results. This relieves a caller from dependencies on the callee, and it allows direct transfer of information further down the call stack, e...

BASIC METHODS OF CLASSIFICATION AND CHARACTERISTICS OF METHODS OF PRICING IN UKRAINE

OpenAIRE

A. Boguslavskiy

2014-01-01

The article provided definitions and shows the need to use different methods of pricing of enterprises. Exposed the reasons of the absence of a universal classification of pricing methods. The approaches of different authors to classify groups of pricing methods: 1) the cost method; 2) methods with a focus on competition; 3) methods for pricing based on demand, 4) pricing with a focus on maximum profit, 5) parametric methods, 6) pricing under risk and uncertainty, etc. An improved classificat...

Compositions, antibodies, asthma diagnosis methods, and methods for preparing antibodies

Energy Technology Data Exchange (ETDEWEB)

Jin, Hongjun; Zangar, Richard C.

2017-01-17

Methods for preparing an antibody are provided with the method including incorporating 3-bromo-4-hydroxy-benzoic acid into a protein to form an antigen, immunizing a mammalian host with the antigen, and recovering an antibody having an affinity for the antigen from the host. Antibodies having a binding affinity for a monohalotyrosine are provided as well as composition comprising an antibody bound with monohalotyrosine. Compositions comprising a protein having a 3-bromo-4-hydroxy-benzoic acid moiety are also provided. Methods for evaluating the severity of asthma are provide with the methods including analyzing sputum of a patient using an antibody having a binding affinity for monohalotyrosine, and measuring the amount of antibody bound to protein. Methods for determining eosinophil activity in bodily fluid are also provided with the methods including exposing bodily fluid to an antibody having a binding affinity for monohalotyrosine, and measuring the amount of bound antibody to determine the eosinophil activity.

User interface inspection methods a user-centered design method

CERN Document Server

Wilson, Chauncey

2014-01-01

User Interface Inspection Methods succinctly covers five inspection methods: heuristic evaluation, perspective-based user interface inspection, cognitive walkthrough, pluralistic walkthrough, and formal usability inspections. Heuristic evaluation is perhaps the best-known inspection method, requiring a group of evaluators to review a product against a set of general principles. The perspective-based user interface inspection is based on the principle that different perspectives will find different problems in a user interface. In the related persona-based inspection, colleagues assume the

galerkin's methods

African Journals Online (AJOL)

user

The assumed deflection shapes used in the approximate methods such as in the Galerkin's method were normally ... to direct compressive forces Nx, was derived by Navier. [3]. ..... tend to give higher frequency and stiffness, as well as.

Radiometric dating methods

International Nuclear Information System (INIS)

Bourdon, B.

2003-01-01

The general principle of isotope dating methods is based on the presence of radioactive isotopes in the geologic or archaeological object to be dated. The decay with time of these isotopes is used to determine the 'zero' time corresponding to the event to be dated. This paper recalls the general principle of isotope dating methods (bases, analytical methods, validation of results and uncertainties) and presents the methods based on natural radioactivity (Rb-Sr, Sm-Nd, U-Pb, Re-Os, K-Ar (Ar-Ar), U-Th-Ra- 210 Pb, U-Pa, 14 C, 36 Cl, 10 Be) and the methods based on artificial radioactivity with their applications. Finally, the methods based on irradiation damages (thermoluminescence, fission tracks, electron spin resonance) are briefly evoked. (J.S.)

Method Mixins

DEFF Research Database (Denmark)

Ernst, Erik

2002-01-01

. Method mixins use shared name spaces to transfer information between caller and callee, as opposed to traditional invocation which uses parameters and returned results. This relieves a caller from dependencies on the callee, and it allows direct transfer of information further down the call stack, e......The procedure call mechanism has conquered the world of programming, with object-oriented method invocation being a procedure call in context of an object. This paper presents an alternative, method mixin invocations, that is optimized for flexible creation of composite behavior, where traditional...

The Value of Mixed Methods Research: A Mixed Methods Study

Science.gov (United States)

McKim, Courtney A.

2017-01-01

The purpose of this explanatory mixed methods study was to examine the perceived value of mixed methods research for graduate students. The quantitative phase was an experiment examining the effect of a passage's methodology on students' perceived value. Results indicated students scored the mixed methods passage as more valuable than those who…

Nondestructive testing method

International Nuclear Information System (INIS)

Porter, J.F.

1996-01-01

Nondestructive testing (NDT) is the use of physical and chemical methods for evaluating material integrity without impairing its intended usefulness or continuing service. Nondestructive tests are used by manufaturer's for the following reasons: 1) to ensure product reliability; 2) to prevent accidents and save human lives; 3) to aid in better product design; 4) to control manufacturing processes; and 5) to maintain a uniform quality level. Nondestructive testing is used extensively on power plants, oil and chemical refineries, offshore oil rigs and pipeline (NDT can even be conducted underwater), welds on tanks, boilers, pressure vessels and heat exchengers. NDT is now being used for testing concrete and composite materials. Because of the criticality of its application, NDT should be performed and the results evaluated by qualified personnel. There are five basic nondestructive examination methods: 1) liquid penetrant testing - method used for detecting surface flaws in materials. This method can be used for metallic and nonmetallic materials, portable and relatively inexpensive. 2) magnetic particle testing - method used to detect surface and subsurface flaws in ferromagnetic materials; 3) radiographic testing - method used to detect internal flaws and significant variation in material composition and thickness; 4) ultrasonic testing - method used to detect internal and external flaws in materials. This method uses ultrasonics to measure thickness of a material or to examine the internal structure for discontinuities. 5) eddy current testing - method used to detect surface and subsurface flaws in conductive materials. Not one nondestructive examination method can find all discontinuities in all of the materials capable of being tested. The most important consideration is for the specifier of the test to be familiar with the test method and its applicability to the type and geometry of the material and the flaws to be detected

Mapping Mixed Methods Research: Methods, Measures, and Meaning

Science.gov (United States)

Wheeldon, J.

2010-01-01

This article explores how concept maps and mind maps can be used as data collection tools in mixed methods research to combine the clarity of quantitative counts with the nuance of qualitative reflections. Based on more traditional mixed methods approaches, this article details how the use of pre/post concept maps can be used to design qualitative…

DOE methods compendium

International Nuclear Information System (INIS)

Leasure, C.S.

1992-01-01

The Department of Energy (DOE) has established an analytical methods compendium development program to integrate its environmental analytical methods. This program is administered through DOE's Laboratory Management Division (EM-563). The primary objective of this program is to assemble a compendium of analytical chemistry methods of known performance for use by all DOE Environmental Restoration and Waste Management program. This compendium will include methods for sampling, field screening, fixed analytical laboratory and mobile analytical laboratory analyses. It will also include specific guidance on the proper selection of appropriate sampling and analytical methods in using specific analytical requirements

The preconditioned Gauss-Seidel method faster than the SOR method

Science.gov (United States)

Niki, Hiroshi; Kohno, Toshiyuki; Morimoto, Munenori

2008-09-01

In recent years, a number of preconditioners have been applied to linear systems [A.D. Gunawardena, S.K. Jain, L. Snyder, Modified iterative methods for consistent linear systems, Linear Algebra Appl. 154-156 (1991) 123-143; T. Kohno, H. Kotakemori, H. Niki, M. Usui, Improving modified Gauss-Seidel method for Z-matrices, Linear Algebra Appl. 267 (1997) 113-123; H. Kotakemori, K. Harada, M. Morimoto, H. Niki, A comparison theorem for the iterative method with the preconditioner (I+Smax), J. Comput. Appl. Math. 145 (2002) 373-378; H. Kotakemori, H. Niki, N. Okamoto, Accelerated iteration method for Z-matrices, J. Comput. Appl. Math. 75 (1996) 87-97; M. Usui, H. Niki, T.Kohno, Adaptive Gauss-Seidel method for linear systems, Internat. J. Comput. Math. 51(1994)119-125 [10

Methods of evaluating SPECT images. The usefulness of the Matsuda`s method by the Patlak plot method in children

Energy Technology Data Exchange (ETDEWEB)

Takaishi, Yasuko [Nippon Medical School, Tokyo (Japan); Hashimoto, Kiyoshi; Fujino, Osamu [and others

1998-11-01

Single photon emission computed tomography (SPECT) is a tool to study cerebral blood flow (CBF) kinetics. There are three methods of evaluating SPECT images: visual, semi-quantitative (evaluation of the radioactivity ratio of the cerebral region to the cerebellum (R/CE) or to the thalamus (R/TH)) and quantitative (Matsuda`s method by Patlak plot method using {sup 99m}Tc-hexamethylpropylene amine oxime radionuclide angiography). We evaluated SPECT images by the quantitative method in 14 patients with neurological disorders and examined the correlation of the results to those obtained by the semi-quantitative method. There was no significant correlation between the R/CE or R/TH ratio and regional CBF except two regions. The evaluation by the semi-quantitative method may have been inappropriate, probably because the cerebellar or thalamic blood flow was not constant in each case. Evaluation by the quantitative method, on the other hand, seemed to be useful not only for the comparison of CBF among normal subjects, but also in the demonstration of progressive changes of CBF in the same case. The Matsuda`s method by the Patlak plot method is suitable for examination of children, since it dose not require aortic blood sampling. (author)

Transport equation solving methods

International Nuclear Information System (INIS)

Granjean, P.M.

1984-06-01

This work is mainly devoted to Csub(N) and Fsub(N) methods. CN method: starting from a lemma stated by Placzek, an equivalence is established between two problems: the first one is defined in a finite medium bounded by a surface S, the second one is defined in the whole space. In the first problem the angular flux on the surface S is shown to be the solution of an integral equation. This equation is solved by Galerkin's method. The Csub(N) method is applied here to one-velocity problems: in plane geometry, slab albedo and transmission with Rayleigh scattering, calculation of the extrapolation length; in cylindrical geometry, albedo and extrapolation length calculation with linear scattering. Fsub(N) method: the basic integral transport equation of the Csub(N) method is integrated on Case's elementary distributions; another integral transport equation is obtained: this equation is solved by a collocation method. The plane problems solved by the Csub(N) method are also solved by the Fsub(N) method. The Fsub(N) method is extended to any polynomial scattering law. Some simple spherical problems are also studied. Chandrasekhar's method, collision probability method, Case's method are presented for comparison with Csub(N) and Fsub(N) methods. This comparison shows the respective advantages of the two methods: a) fast convergence and possible extension to various geometries for Csub(N) method; b) easy calculations and easy extension to polynomial scattering for Fsub(N) method [fr

Ensemble Methods

Science.gov (United States)

Re, Matteo; Valentini, Giorgio

2012-03-01

Ensemble methods are statistical and computational learning procedures reminiscent of the human social learning behavior of seeking several opinions before making any crucial decision. The idea of combining the opinions of different "experts" to obtain an overall “ensemble” decision is rooted in our culture at least from the classical age of ancient Greece, and it has been formalized during the Enlightenment with the Condorcet Jury Theorem[45]), which proved that the judgment of a committee is superior to those of individuals, provided the individuals have reasonable competence. Ensembles are sets of learning machines that combine in some way their decisions, or their learning algorithms, or different views of data, or other specific characteristics to obtain more reliable and more accurate predictions in supervised and unsupervised learning problems [48,116]. A simple example is represented by the majority vote ensemble, by which the decisions of different learning machines are combined, and the class that receives the majority of “votes” (i.e., the class predicted by the majority of the learning machines) is the class predicted by the overall ensemble [158]. In the literature, a plethora of terms other than ensembles has been used, such as fusion, combination, aggregation, and committee, to indicate sets of learning machines that work together to solve a machine learning problem [19,40,56,66,99,108,123], but in this chapter we maintain the term ensemble in its widest meaning, in order to include the whole range of combination methods. Nowadays, ensemble methods represent one of the main current research lines in machine learning [48,116], and the interest of the research community on ensemble methods is witnessed by conferences and workshops specifically devoted to ensembles, first of all the multiple classifier systems (MCS) conference organized by Roli, Kittler, Windeatt, and other researchers of this area [14,62,85,149,173]. Several theories have been

Synthesis, crystal structure, and vibrational spectroscopic and UV-visible studies of Cs{sub 2}MnP{sub 2}O{sub 7}

Energy Technology Data Exchange (ETDEWEB)

Kaoua, Saida; Krimi, Saida [LPCMI, Faculte des Sciences Aien Chok, UH2C, Casablanca (Morocco); Pechev, Stanislav; Gravereau, Pierre; Chaminade, Jean-Pierre [CNRS, Universite de Bordeaux, ICMCB, 87, Avenue du Dr. A. Schweitzer, Pessac (France); Couzi, Michel [CNRS, Universite de Bordeaux, ISM, UMR 5255, F-33400 Talence (France); El Jazouli, Abdelaziz, E-mail: eljazouli_abdelaziz@yahoo.fr [LCMS, URAC 17, Faculte des Sciences Ben M' Sik, UH2MC, Casablanca (Morocco)

2013-02-15

A new member of the A{sub 2}MP{sub 2}O{sub 7} diphosphate family, Cs{sub 2}MnP{sub 2}O{sub 7}, has been synthesized and structurally characterized. The crystal structure was determined by single crystal X-Ray diffraction. Cs{sub 2}MnP{sub 2}O{sub 7} crystallizes in the orthorhombic system, space group Pnma ( Music-Sharp-Sign 62), with the unit cell parameters a=16.3398(3), b=5.3872(1), c=9.8872(2) A, Z=4 and V=870.33(3) A{sup 3}. The structure parameters were refined to a final R{sub 1}/wR{sub 2}=0.0194/0.0441 for 1650 observed reflections. The 2D framework of Cs{sub 2}MnP{sub 2}O{sub 7} structure consists of P{sub 2}O{sub 7} and MnO{sub 5} units. The corner-shared MnO{sub 5} and P{sub 2}O{sub 7} units are alternately arranged along the b axis to form [(MnO)P{sub 2}O{sub 7}]{sub {infinity}} chains. These chains are interconnected by an oxygen atom to form sheets parallel to the (b, c) plane. The cesium atoms are located between the sheets in 9- and 10-fold coordinated sites. The infrared and Raman vibrational spectra have been investigated. A factor group analysis leads to the determination of internal modes of (P{sub 2}O{sub 7}) groups. UV-visible spectrum consists of weak bands, between 340 and 700 nm, assigned to the forbidden d-d transitions of Mn{sup 2+} ion, and of a strong band around 250 nm, attributed to the O--Mn charge transfer. - Graphical abstract: Structure of Cs{sub 2}MnP{sub 2}O{sub 7}: The 2D structure of Cs{sub 2}MnP{sub 2}O{sub 7} is built from P{sub 2}O{sub 7} diphosphate groups and MnO{sub 5} square pyramids which share corners and form [(MnO)P{sub 2}O{sub 7}]{sub {infinity}} chains along b axis. These chains are interconnected by an oxygen atom to form wavy (MnP{sub 2}O{sub 7}){sup 2-} sheets parallel to the (b, c) plane. The cesium ions are located between these sheets in the inter-layers space, in zigzag positions. Highlights: Black-Right-Pointing-Pointer A new diphosphate, Cs{sub 2}MnP{sub 2}O{sub 7}, has been synthesized and structurally

Performative Schizoid Method

DEFF Research Database (Denmark)

Svabo, Connie

2016-01-01

is presented and an example is provided of a first exploratory engagement with it. The method is used in a specific project Becoming Iris, making inquiry into arts-based knowledge creation during a three month visiting scholarship at a small, independent visual art academy. Using the performative schizoid......A performative schizoid method is developed as a method contribution to performance as research. The method is inspired by contemporary research in the human and social sciences urging experimentation and researcher engagement with creative and artistic practice. In the article, the method...... method in Becoming Iris results in four audio-visual and performance-based productions, centered on an emergent theme of the scholartist as a bird in borrowed feathers. Interestingly, the moral lesson of the fable about the vain jackdaw, who dresses in borrowed peacock feathers and becomes a castout...

Dimensionality Reduction Methods: Comparative Analysis of methods PCA, PPCA and KPCA

Directory of Open Access Journals (Sweden)

Jorge Arroyo-Hernández

2016-01-01

Full Text Available The dimensionality reduction methods are algorithms mapping the set of data in subspaces derived from the original space, of fewer dimensions, that allow a description of the data at a lower cost. Due to their importance, they are widely used in processes associated with learning machine. This article presents a comparative analysis of PCA, PPCA and KPCA dimensionality reduction methods. A reconstruction experiment of worm-shape data was performed through structures of landmarks located in the body contour, with methods having different number of main components. The results showed that all methods can be seen as alternative processes. Nevertheless, thanks to the potential for analysis in the features space and the method for calculation of its preimage presented, KPCA offers a better method for recognition process and pattern extraction

Development of nondestructive hybrid measuring method for three-dimensional residual stress distribution of thick welded joint. Hybrid measuring method of inherent strain method and neutron diffraction method

International Nuclear Information System (INIS)

Nakacho, Keiji; Kasahara, Norifumi; Tamura, Ryota

2012-01-01

The measuring methods of the residual stress are classified into destructive one and nondestructive one. The inherent strain method (ISM) is destructive one. The neutron diffraction method (NDM) is nondestructive one. But the measurable depth is limited within about 20 mm and the method cannot measure the weld zone, without destruction of the object. So, in this study, the hybrid measuring method has been developed, by combining the ISM and the NDM. The theory of the hybrid method is the same as the ISM. In the analysis, the strains measured by the NDM without destruction are used. This hybrid measuring method is a true nondestructive measuring method for a thick welded joint. The applicability of the hybrid method has been verified by simulation, using a butt welded joint of thick pipes. In the simulation, the reliable order of the strains measured by the present NDM is very important, and was considered as 10 micro. The measurable regions by the present NDM were assumed. Under the above conditions, the data (the residual elastic strains assumed to be measured by the NDM) were made, and used in the ISM. As a result of such simulation, it has been cleared that the estimated residual stress has very high accuracy, if enough data are used. The required number of data is less than the ISM. (author)

The surface analysis methods; Les methodes d`analyse des surfaces

Energy Technology Data Exchange (ETDEWEB)

Deville, J.P. [Institut de Physique et Chimie, 67 - Strasbourg (France)

1998-11-01

Nowadays, there are a lot of surfaces analysis methods, each having its specificity, its qualities, its constraints (for instance vacuum) and its limits. Expensive in time and in investment, these methods have to be used deliberately. This article appeals to non specialists. It gives some elements of choice according to the studied information, the sensitivity, the use constraints or the answer to a precise question. After having recalled the fundamental principles which govern these analysis methods, based on the interaction between radiations (ultraviolet, X) or particles (ions, electrons) with matter, two methods will be more particularly described: the Auger electron spectroscopy (AES) and x-rays photoemission spectroscopy (ESCA or XPS). Indeed, they are the most widespread methods in laboratories, the easier for use and probably the most productive for the analysis of surface of industrial materials or samples submitted to treatments in aggressive media. (O.M.) 11 refs.

Unstructured characteristic method embedded with variational nodal method using domain decomposition techniques

Energy Technology Data Exchange (ETDEWEB)

Girardi, E.; Ruggieri, J.M. [CEA Cadarache (DER/SPRC/LEPH), 13 - Saint-Paul-lez-Durance (France). Dept. d' Etudes des Reacteurs; Santandrea, S. [CEA Saclay, Dept. Modelisation de Systemes et Structures DM2S/SERMA/LENR, 91 - Gif sur Yvette (France)

2005-07-01

This paper describes a recently-developed extension of our 'Multi-methods,multi-domains' (MM-MD) method for the solution of the multigroup transport equation. Based on a domain decomposition technique, our approach allows us to treat the one-group equation by cooperatively employing several numerical methods together. In this work, we describe the coupling between the Method of Characteristics (integro-differential equation, unstructured meshes) with the Variational Nodal Method (even parity equation, cartesian meshes). Then, the coupling method is applied to the benchmark model of the Phebus experimental facility (Cea Cadarache). Our domain decomposition method give us the capability to employ a very fine mesh in describing a particular fuel bundle with an appropriate numerical method (MOC), while using a much large mesh size in the rest of the core, in conjunction with a coarse-mesh method (VNM). This application shows the benefits of our MM-MD approach, in terms of accuracy and computing time: the domain decomposition method allows us to reduce the Cpu time, while preserving a good accuracy of the neutronic indicators: reactivity, core-to-bundle power coupling coefficient and flux error. (authors)

Unstructured characteristic method embedded with variational nodal method using domain decomposition techniques

International Nuclear Information System (INIS)

Girardi, E.; Ruggieri, J.M.

2005-01-01

This paper describes a recently-developed extension of our 'Multi-methods,multi-domains' (MM-MD) method for the solution of the multigroup transport equation. Based on a domain decomposition technique, our approach allows us to treat the one-group equation by cooperatively employing several numerical methods together. In this work, we describe the coupling between the Method of Characteristics (integro-differential equation, unstructured meshes) with the Variational Nodal Method (even parity equation, cartesian meshes). Then, the coupling method is applied to the benchmark model of the Phebus experimental facility (Cea Cadarache). Our domain decomposition method give us the capability to employ a very fine mesh in describing a particular fuel bundle with an appropriate numerical method (MOC), while using a much large mesh size in the rest of the core, in conjunction with a coarse-mesh method (VNM). This application shows the benefits of our MM-MD approach, in terms of accuracy and computing time: the domain decomposition method allows us to reduce the Cpu time, while preserving a good accuracy of the neutronic indicators: reactivity, core-to-bundle power coupling coefficient and flux error. (authors)

Color image definition evaluation method based on deep learning method

Science.gov (United States)

Liu, Di; Li, YingChun

2018-01-01

In order to evaluate different blurring levels of color image and improve the method of image definition evaluation, this paper proposed a method based on the depth learning framework and BP neural network classification model, and presents a non-reference color image clarity evaluation method. Firstly, using VGG16 net as the feature extractor to extract 4,096 dimensions features of the images, then the extracted features and labeled images are employed in BP neural network to train. And finally achieve the color image definition evaluation. The method in this paper are experimented by using images from the CSIQ database. The images are blurred at different levels. There are 4,000 images after the processing. Dividing the 4,000 images into three categories, each category represents a blur level. 300 out of 400 high-dimensional features are trained in VGG16 net and BP neural network, and the rest of 100 samples are tested. The experimental results show that the method can take full advantage of the learning and characterization capability of deep learning. Referring to the current shortcomings of the major existing image clarity evaluation methods, which manually design and extract features. The method in this paper can extract the images features automatically, and has got excellent image quality classification accuracy for the test data set. The accuracy rate is 96%. Moreover, the predicted quality levels of original color images are similar to the perception of the human visual system.

Cooperative method development

DEFF Research Database (Denmark)

Dittrich, Yvonne; Rönkkö, Kari; Eriksson, Jeanette

2008-01-01

The development of methods tools and process improvements is best to be based on the understanding of the development practice to be supported. Qualitative research has been proposed as a method for understanding the social and cooperative aspects of software development. However, qualitative...... research is not easily combined with the improvement orientation of an engineering discipline. During the last 6 years, we have applied an approach we call `cooperative method development', which combines qualitative social science fieldwork, with problem-oriented method, technique and process improvement....... The action research based approach focusing on shop floor software development practices allows an understanding of how contextual contingencies influence the deployment and applicability of methods, processes and techniques. This article summarizes the experiences and discusses the further development...

Conjugated polymer nanoparticles, methods of using, and methods of making

KAUST Repository

Habuchi, Satoshi; Piwonski, Hubert Marek; Michinobu, Tsuyoshi

2017-01-01

Embodiments of the present disclosure provide for conjugated polymer nanoparticle, method of making conjugated polymer nanoparticles, method of using conjugated polymer nanoparticle, polymers, and the like.

Conjugated polymer nanoparticles, methods of using, and methods of making

KAUST Repository

Habuchi, Satoshi

2017-03-16

Embodiments of the present disclosure provide for conjugated polymer nanoparticle, method of making conjugated polymer nanoparticles, method of using conjugated polymer nanoparticle, polymers, and the like.

Numerical method for time-dependent localized corrosion analysis with moving boundaries by combining the finite volume method and voxel method

International Nuclear Information System (INIS)

Onishi, Yuki; Takiyasu, Jumpei; Amaya, Kenji; Yakuwa, Hiroshi; Hayabusa, Keisuke

2012-01-01

Highlights: ► A novel numerical method to analyze time dependent localized corrosion is developed. ► It takes electromigration, mass diffusion, chemical reactions, and moving boundaries. ► Our method perfectly satisfies the conservation of mass and electroneutrality. ► The behavior of typical crevice corrosion is successfully simulated. ► Both verification and validation of our method are carried out. - Abstract: A novel numerical method for time-dependent localized corrosion analysis is presented. Electromigration, mass diffusion, chemical reactions, and moving boundaries are considered in the numerical simulation of localized corrosion of engineering alloys in an underwater environment. Our method combines the finite volume method (FVM) and the voxel method. The FVM is adopted in the corrosion rate calculation so that the conservation of mass is satisfied. A newly developed decoupled algorithm with a projection method is introduced in the FVM to decouple the multiphysics problem into the electrostatic, mass transport, and chemical reaction analyses with electroneutrality maintained. The polarization curves for the corroding metal are used as boundary conditions for the metal surfaces to calculate the corrosion rates. The voxel method is adopted in updating the moving boundaries of cavities without remeshing and mesh-to-mesh solution mapping. Some modifications of the standard voxel method, which represents the boundaries as zigzag-shaped surfaces, are introduced to generate smooth surfaces. Our method successfully reproduces the numerical and experimental results of a capillary electrophoresis problem. Furthermore, the numerical results are qualitatively consistent with the experimental results for several examples of crevice corrosion.

76 FR 21673 - Alternative Efficiency Determination Methods and Alternate Rating Methods

Science.gov (United States)

2011-04-18

... EERE-2011-BP-TP-00024] RIN 1904-AC46 Alternative Efficiency Determination Methods and Alternate Rating Methods AGENCY: Office of Energy Efficiency and Renewable Energy, Department of Energy. ACTION: Notice of... and data related to the use of computer simulations, mathematical methods, and other alternative...

Scalable fast multipole methods for vortex element methods

KAUST Repository

Hu, Qi

2012-11-01

We use a particle-based method to simulate incompressible flows, where the Fast Multipole Method (FMM) is used to accelerate the calculation of particle interactions. The most time-consuming kernelsâ\\'the Biot-Savart equation and stretching term of the vorticity equationâ\\'are mathematically reformulated so that only two Laplace scalar potentials are used instead of six, while automatically ensuring divergence-free far-field computation. Based on this formulation, and on our previous work for a scalar heterogeneous FMM algorithm, we develop a new FMM-based vortex method capable of simulating general flows including turbulence on heterogeneous architectures, which distributes the work between multi-core CPUs and GPUs to best utilize the hardware resources and achieve excellent scalability. The algorithm also uses new data structures which can dynamically manage inter-node communication and load balance efficiently but with only a small parallel construction overhead. This algorithm can scale to large-sized clusters showing both strong and weak scalability. Careful error and timing trade-off analysis are also performed for the cutoff functions induced by the vortex particle method. Our implementation can perform one time step of the velocity+stretching for one billion particles on 32 nodes in 55.9 seconds, which yields 49.12 Tflop/s. © 2012 IEEE.

method

Directory of Open Access Journals (Sweden)

L. M. Kimball

2002-01-01

Full Text Available This paper presents an interior point algorithm to solve the multiperiod hydrothermal economic dispatch (HTED. The multiperiod HTED is a large scale nonlinear programming problem. Various optimization methods have been applied to the multiperiod HTED, but most neglect important network characteristics or require decomposition into thermal and hydro subproblems. The algorithm described here exploits the special bordered block diagonal structure and sparsity of the Newton system for the first order necessary conditions to result in a fast efficient algorithm that can account for all network aspects. Applying this new algorithm challenges a conventional method for the use of available hydro resources known as the peak shaving heuristic.

Development of modelling method selection tool for health services management: from problem structuring methods to modelling and simulation methods.

Science.gov (United States)

Jun, Gyuchan T; Morris, Zoe; Eldabi, Tillal; Harper, Paul; Naseer, Aisha; Patel, Brijesh; Clarkson, John P

2011-05-19

There is an increasing recognition that modelling and simulation can assist in the process of designing health care policies, strategies and operations. However, the current use is limited and answers to questions such as what methods to use and when remain somewhat underdeveloped. The aim of this study is to provide a mechanism for decision makers in health services planning and management to compare a broad range of modelling and simulation methods so that they can better select and use them or better commission relevant modelling and simulation work. This paper proposes a modelling and simulation method comparison and selection tool developed from a comprehensive literature review, the research team's extensive expertise and inputs from potential users. Twenty-eight different methods were identified, characterised by their relevance to different application areas, project life cycle stages, types of output and levels of insight, and four input resources required (time, money, knowledge and data). The characterisation is presented in matrix forms to allow quick comparison and selection. This paper also highlights significant knowledge gaps in the existing literature when assessing the applicability of particular approaches to health services management, where modelling and simulation skills are scarce let alone money and time. A modelling and simulation method comparison and selection tool is developed to assist with the selection of methods appropriate to supporting specific decision making processes. In particular it addresses the issue of which method is most appropriate to which specific health services management problem, what the user might expect to be obtained from the method, and what is required to use the method. In summary, we believe the tool adds value to the scarce existing literature on methods comparison and selection.

Comparison of nuclear analytical methods with competitive methods

International Nuclear Information System (INIS)

1987-10-01

The use of nuclear analytical techniques, especially neutron activation analysis, already have a 50 year old history. Today several sensitive and accurate, non-nuclear trace element analytical techniques are available and new methods are continuously developed. The IAEA is supporting the development of nuclear analytical laboratories in its Member States. In order to be able to advise the developing countries which methods to use in different applications, it is important to know the present status and development trends of nuclear analytical methods, what are their benefits, drawbacks and recommended fields of application, compared with other, non-nuclear techniques. In order to get an answer to these questions the IAEA convened this Advisory Group Meeting. This volume is the outcome of the presentations and discussions of the meeting. A separate abstract was prepared for each of the 21 papers. Refs, figs, tabs

Spectroscopic methods

International Nuclear Information System (INIS)

Ivanovich, M.; Murray, A.

1992-01-01

The principles involved in the interaction of nuclear radiation with matter are described, as are the principles behind methods of radiation detection. Different types of radiation detectors are described and methods of detection such as alpha, beta and gamma spectroscopy, neutron activation analysis are presented. Details are given of measurements of uranium-series disequilibria. (UK)

Statistical and numerical methods to improve the transient divided bar method

DEFF Research Database (Denmark)

Bording, Thue Sylvester; Nielsen, S.B.; Balling, N.

The divided bar method is a commonly used method to measure thermal conductivity of rock samples in laboratory. We present improvements to this method that allows for simultaneous measurements of both thermal conductivity and thermal diffusivity. The divided bar setup is run in a transient mode...

A European legal method? On European private law and scientific method

NARCIS (Netherlands)

Hesselink, M.

2009-01-01

This article examines the relationship between European private law and scientific method. It argues that a European legal method is a good idea. Not primarily because it will make European private law scholarship look more scientific, but because a debate on the method of a normative science

Uranium price forecasting methods

International Nuclear Information System (INIS)

Fuller, D.M.

1994-01-01

This article reviews a number of forecasting methods that have been applied to uranium prices and compares their relative strengths and weaknesses. The methods reviewed are: (1) judgemental methods, (2) technical analysis, (3) time-series methods, (4) fundamental analysis, and (5) econometric methods. Historically, none of these methods has performed very well, but a well-thought-out model is still useful as a basis from which to adjust to new circumstances and try again

Approaches to Mixed Methods Dissemination and Implementation Research: Methods, Strengths, Caveats, and Opportunities.

Science.gov (United States)

Green, Carla A; Duan, Naihua; Gibbons, Robert D; Hoagwood, Kimberly E; Palinkas, Lawrence A; Wisdom, Jennifer P

2015-09-01

Limited translation of research into practice has prompted study of diffusion and implementation, and development of effective methods of encouraging adoption, dissemination and implementation. Mixed methods techniques offer approaches for assessing and addressing processes affecting implementation of evidence-based interventions. We describe common mixed methods approaches used in dissemination and implementation research, discuss strengths and limitations of mixed methods approaches to data collection, and suggest promising methods not yet widely used in implementation research. We review qualitative, quantitative, and hybrid approaches to mixed methods dissemination and implementation studies, and describe methods for integrating multiple methods to increase depth of understanding while improving reliability and validity of findings.

Comparison of Rice Direct Seeding Methods (Mechanical and Manual with Transplanting Method

Directory of Open Access Journals (Sweden)

A Eyvani

2014-04-01

Full Text Available The main method of rice planting in Iran is transplanting. Due to poor mechanization of rice production, this method is laborious and costly. The other method is direct seeding in wet lands which is performed in the one third of rice cultivation area of the world. The most important problem in this method is high labor requirement of weed control. In order to compare the different rice planting methods (direct drilling, transplanting, and seed broadcasting a manually operated rice direct seeder (drum seeder was designed and fabricated. The research was conducted using a randomized complete block design with three treatments and three replications. Required draft force, field efficiency, effective field capacity, yield, and yield components were measured and the treatments were compared economically. Results showed that there were significant differences among the treatments from the view point of rice yield at the confidence level of 95% i.e. the transplanting method had the maximum yield. A higher rice yield was obtained from the direct seeder compared to the manual broadcasting method but, the difference between these two methods for crop yield was not significant even at the confidence level of the 95%. The coefficient of variation of seed distribution with direct seeding was more than 20%. The labor and time requirements per hectare reduced to 7 and 20 times, respectively when comparing the newly designed direct seeder with the transplanting method. The direct seeding method had the highest benefit to cost ratio in spite of its lower yield. Therefore, this method could be recommended in the rice growing regions.

Advanced differential quadrature methods

CERN Document Server

Zong, Zhi

2009-01-01

Modern Tools to Perform Numerical DifferentiationThe original direct differential quadrature (DQ) method has been known to fail for problems with strong nonlinearity and material discontinuity as well as for problems involving singularity, irregularity, and multiple scales. But now researchers in applied mathematics, computational mechanics, and engineering have developed a range of innovative DQ-based methods to overcome these shortcomings. Advanced Differential Quadrature Methods explores new DQ methods and uses these methods to solve problems beyond the capabilities of the direct DQ method.After a basic introduction to the direct DQ method, the book presents a number of DQ methods, including complex DQ, triangular DQ, multi-scale DQ, variable order DQ, multi-domain DQ, and localized DQ. It also provides a mathematical compendium that summarizes Gauss elimination, the Runge-Kutta method, complex analysis, and more. The final chapter contains three codes written in the FORTRAN language, enabling readers to q...

Inflow Turbulence Generation Methods

Science.gov (United States)

Wu, Xiaohua

2017-01-01

Research activities on inflow turbulence generation methods have been vigorous over the past quarter century, accompanying advances in eddy-resolving computations of spatially developing turbulent flows with direct numerical simulation, large-eddy simulation (LES), and hybrid Reynolds-averaged Navier-Stokes-LES. The weak recycling method, rooted in scaling arguments on the canonical incompressible boundary layer, has been applied to supersonic boundary layer, rough surface boundary layer, and microscale urban canopy LES coupled with mesoscale numerical weather forecasting. Synthetic methods, originating from analytical approximation to homogeneous isotropic turbulence, have branched out into several robust methods, including the synthetic random Fourier method, synthetic digital filtering method, synthetic coherent eddy method, and synthetic volume forcing method. This article reviews major progress in inflow turbulence generation methods with an emphasis on fundamental ideas, key milestones, representative applications, and critical issues. Directions for future research in the field are also highlighted.

Improved radioanalytical methods

International Nuclear Information System (INIS)

Erickson, M.D.; Aldstadt, J.H.; Alvarado, J.S.; Crain, J.S.; Orlandini, K.A.; Smith, L.L.

1995-01-01

Methods for the chemical characterization of the environment are being developed under a multitask project for the Analytical Services Division (EM-263) within the US Department of Energy (DOE) Office of Environmental Management. This project focuses on improvement of radioanalytical methods with an emphasis on faster and cheaper routine methods. We have developed improved methods, for separation of environmental levels of technetium-99 and strontium-89/90, radium, and actinides from soil and water; and for separation of actinides from soil and water matrix interferences. Among the novel separation techniques being used are element- and class-specific resins and membranes. (The 3M Corporation is commercializing Empore trademark membranes under a cooperative research and development agreement [CRADA] initiated under this project). We have also developed methods for simultaneous detection of multiple isotopes using inductively coupled plasma-mass spectrometry (ICP-MS). The ICP-MS method requires less rigorous chemical separations than traditional radiochemical analyses because of its mass-selective mode of detection. Actinides and their progeny have been isolated and concentrated from a variety of natural water matrices by using automated batch separation incorporating selective resins prior to ICP-MS analyses. In addition, improvements in detection limits, sample volume, and time of analysis were obtained by using other sample introduction techniques, such as ultrasonic nebulization and electrothermal vaporization. Integration and automation of the separation methods with the ICP-MS methodology by using flow injection analysis is underway, with an objective of automating methods to achieve more reproducible results, reduce labor costs, cut analysis time, and minimize secondary waste generation through miniaturization of the process

Project Method, as One of the Basic Methods of Environmental Education

Science.gov (United States)

Szállassy, Noémi

2008-01-01

Our aim was to present in this paper the one of the most important methods of environmental education, the project method. We present here the steps and phases of project method and we give an example of how to use these elements in planning an activity for celebrating the World Day for Water.

Methods of nonlinear analysis

CERN Document Server

Bellman, Richard Ernest

1970-01-01

In this book, we study theoretical and practical aspects of computing methods for mathematical modelling of nonlinear systems. A number of computing techniques are considered, such as methods of operator approximation with any given accuracy; operator interpolation techniques including a non-Lagrange interpolation; methods of system representation subject to constraints associated with concepts of causality, memory and stationarity; methods of system representation with an accuracy that is the best within a given class of models; methods of covariance matrix estimation;methods for low-rank mat

Transport methods: general. 1. The Analytical Monte Carlo Method for Radiation Transport Calculations

International Nuclear Information System (INIS)

Martin, William R.; Brown, Forrest B.

2001-01-01

We present an alternative Monte Carlo method for solving the coupled equations of radiation transport and material energy. This method is based on incorporating the analytical solution to the material energy equation directly into the Monte Carlo simulation for the radiation intensity. This method, which we call the Analytical Monte Carlo (AMC) method, differs from the well known Implicit Monte Carlo (IMC) method of Fleck and Cummings because there is no discretization of the material energy equation since it is solved as a by-product of the Monte Carlo simulation of the transport equation. Our method also differs from the method recently proposed by Ahrens and Larsen since they use Monte Carlo to solve both equations, while we are solving only the radiation transport equation with Monte Carlo, albeit with effective sources and cross sections to represent the emission sources. Our method bears some similarity to a method developed and implemented by Carter and Forest nearly three decades ago, but there are substantive differences. We have implemented our method in a simple zero-dimensional Monte Carlo code to test the feasibility of the method, and the preliminary results are very promising, justifying further extension to more realistic geometries. (authors)

Two different hematocrit detection methods: Different methods, different results?

Directory of Open Access Journals (Sweden)

Schuepbach Reto A

2010-03-01

Full Text Available Abstract Background Less is known about the influence of hematocrit detection methodology on transfusion triggers. Therefore, the aim of the present study was to compare two different hematocrit-assessing methods. In a total of 50 critically ill patients hematocrit was analyzed using (1 blood gas analyzer (ABLflex 800 and (2 the central laboratory method (ADVIA® 2120 and compared. Findings Bland-Altman analysis for repeated measurements showed a good correlation with a bias of +1.39% and 2 SD of ± 3.12%. The 24%-hematocrit-group showed a correlation of r2 = 0.87. With a kappa of 0.56, 22.7% of the cases would have been transfused differently. In the-28%-hematocrit group with a similar correlation (r2 = 0.8 and a kappa of 0.58, 21% of the cases would have been transfused differently. Conclusions Despite a good agreement between the two methods used to determine hematocrit in clinical routine, the calculated difference of 1.4% might substantially influence transfusion triggers depending on the employed method.

Method Mixins

DEFF Research Database (Denmark)

Ernst, Erik

2005-01-01

The world of programming has been conquered by the procedure call mechanism, including object-oriented method invocation which is a procedure call in context of an object. This paper presents an alternative, method mixin invocations, that is optimized for flexible creation of composite behavior...... of abstraction and reuse. Method mixins use shared name spaces to transfer information between caller and callee, as opposed to traditional invocation which uses parameters and returned results. This relieves the caller from dependencies on the callee, and it allows direct transfer of information further down...... the call stack, e.g., to a callee's callee. The mechanism has been implemented in the programming language gbeta. Variants of the mechanism could be added to almost any imperative programming language....

Dianhydrides, polyimides, methods of making each, and methods of use

KAUST Repository

Ma, Xiaohua; Pinnau, Ingo; Ghanem, Bader

2015-01-01

Embodiments of the present disclosure provide for an aromatic dianhydride, a method of making an aromatic dianhydride, an aromatic dianhydride-based polyimide, a method of making an aromatic dianhydride-based polyimide, and the like.

Dianhydrides, polyimides, methods of making each, and methods of use

KAUST Repository

Ma, Xiaohua

2015-01-08

Embodiments of the present disclosure provide for an aromatic dianhydride, a method of making an aromatic dianhydride, an aromatic dianhydride-based polyimide, a method of making an aromatic dianhydride-based polyimide, and the like.

The Method of Manufactured Universes for validating uncertainty quantification methods

KAUST Repository

Stripling, H.F.; Adams, M.L.; McClarren, R.G.; Mallick, B.K.

2011-01-01

The Method of Manufactured Universes is presented as a validation framework for uncertainty quantification (UQ) methodologies and as a tool for exploring the effects of statistical and modeling assumptions embedded in these methods. The framework

Design Methods in Practice

DEFF Research Database (Denmark)

Jensen, Torben Elgaard; Andreasen, Mogens Myrup

2010-01-01

The paper challenges the dominant and widespread view that a good design method will guarantee a systematic approach as well as certain results. First, it explores the substantial differences between on the one hand the conception of methods implied in Pahl & Beitz’s widely recognized text book...... on engineering design, and on the other hand the understanding of method use, which has emerged from micro-sociological studies of practice (ethnomethodology). Second, it reviews a number of case studies conducted by engineering students, who were instructed to investigate the actual use of design methods...... in Danish companies. The paper concludes that design methods in practice deviate substantially from Pahl & Beitz’s description of method use: The object and problems, which are the starting points for method use, are more contested and less given than generally assumed; The steps of methods are often...

FPGA Implementation of the Coupled Filtering Method and the Affine Warping Method.

Science.gov (United States)

Zhang, Chen; Liang, Tianzhu; Mok, Philip K T; Yu, Weichuan

2017-07-01

In ultrasound image analysis, the speckle tracking methods are widely applied to study the elasticity of body tissue. However, "feature-motion decorrelation" still remains as a challenge for the speckle tracking methods. Recently, a coupled filtering method and an affine warping method were proposed to accurately estimate strain values, when the tissue deformation is large. The major drawback of these methods is the high computational complexity. Even the graphics processing unit (GPU)-based program requires a long time to finish the analysis. In this paper, we propose field-programmable gate array (FPGA)-based implementations of both methods for further acceleration. The capability of FPGAs on handling different image processing components in these methods is discussed. A fast and memory-saving image warping approach is proposed. The algorithms are reformulated to build a highly efficient pipeline on FPGA. The final implementations on a Xilinx Virtex-7 FPGA are at least 13 times faster than the GPU implementation on the NVIDIA graphic card (GeForce GTX 580).

Methods for assessing geodiversity

Science.gov (United States)

Zwoliński, Zbigniew; Najwer, Alicja; Giardino, Marco

2017-04-01

The accepted systematics of geodiversity assessment methods will be presented in three categories: qualitative, quantitative and qualitative-quantitative. Qualitative methods are usually descriptive methods that are suited to nominal and ordinal data. Quantitative methods use a different set of parameters and indicators to determine the characteristics of geodiversity in the area being researched. Qualitative-quantitative methods are a good combination of the collection of quantitative data (i.e. digital) and cause-effect data (i.e. relational and explanatory). It seems that at the current stage of the development of geodiversity research methods, qualitative-quantitative methods are the most advanced and best assess the geodiversity of the study area. Their particular advantage is the integration of data from different sources and with different substantive content. Among the distinguishing features of the quantitative and qualitative-quantitative methods for assessing geodiversity are their wide use within geographic information systems, both at the stage of data collection and data integration, as well as numerical processing and their presentation. The unresolved problem for these methods, however, is the possibility of their validation. It seems that currently the best method of validation is direct filed confrontation. Looking to the next few years, the development of qualitative-quantitative methods connected with cognitive issues should be expected, oriented towards ontology and the Semantic Web.

Mixed methods research.

Science.gov (United States)

Halcomb, Elizabeth; Hickman, Louise

2015-04-08

Mixed methods research involves the use of qualitative and quantitative data in a single research project. It represents an alternative methodological approach, combining qualitative and quantitative research approaches, which enables nurse researchers to explore complex phenomena in detail. This article provides a practical overview of mixed methods research and its application in nursing, to guide the novice researcher considering a mixed methods research project.

Recent Advances in the Method of Forces: Integrated Force Method of Structural Analysis

Science.gov (United States)

Patnaik, Surya N.; Coroneos, Rula M.; Hopkins, Dale A.

1998-01-01

Stress that can be induced in an elastic continuum can be determined directly through the simultaneous application of the equilibrium equations and the compatibility conditions. In the literature, this direct stress formulation is referred to as the integrated force method. This method, which uses forces as the primary unknowns, complements the popular equilibrium-based stiffness method, which considers displacements as the unknowns. The integrated force method produces accurate stress, displacement, and frequency results even for modest finite element models. This version of the force method should be developed as an alternative to the stiffness method because the latter method, which has been researched for the past several decades, may have entered its developmental plateau. Stress plays a primary role in the development of aerospace and other products, and its analysis is difficult. Therefore, it is advisable to use both methods to calculate stress and eliminate errors through comparison. This paper examines the role of the integrated force method in analysis, animation and design.

Test Methods for Evaluating Solid Waste, Physical/Chemical Methods. First Update. (3rd edition)

International Nuclear Information System (INIS)

Friedman; Sellers.

1988-01-01

The proposed Update is for Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846, Third Edition. Attached to the report is a list of methods included in the proposed update indicating whether the method is a new method, a partially revised method, or a totally revised method. Do not discard or replace any of the current pages in the SW-846 manual until the proposed update I package is promulgated. Until promulgation of the update package, the methods in the update package are not officially part of the SW-846 manual and thus do not carry the status of EPA-approved methods. In addition to the proposed Update, six finalized methods are included for immediate inclusion into the Third Edition of SW-846. Four methods, originally proposed October 1, 1984, will be finalized in a soon to be released rulemaking. They are, however, being submitted to subscribers for the first time in the update. These methods are 7211, 7381, 7461, and 7951. Two other methods were finalized in the 2nd Edition of SW-846. They were inadvertantly omitted from the 3rd Edition and are not being proposed as new. These methods are 7081 and 7761

Consumer Behavior Research Methods

DEFF Research Database (Denmark)

Chrysochou, Polymeros

2017-01-01

This chapter starts by distinguishing consumer behavior research methods based on the type of data used, being either secondary or primary. Most consumer behavior research studies phenomena that require researchers to enter the field and collect data on their own, and therefore the chapter...... emphasizes the discussion of primary research methods. Based on the nature of the data primary research methods are further distinguished into qualitative and quantitative. The chapter describes the most important and popular qualitative and quantitative methods. It concludes with an overall evaluation...... of the methods and how to improve quality in consumer behavior research methods....

Comparative study of the geostatistical ore reserve estimation method over the conventional methods

International Nuclear Information System (INIS)

Kim, Y.C.; Knudsen, H.P.

1975-01-01

Part I contains a comprehensive treatment of the comparative study of the geostatistical ore reserve estimation method over the conventional methods. The conventional methods chosen for comparison were: (a) the polygon method, (b) the inverse of the distance squared method, and (c) a method similar to (b) but allowing different weights in different directions. Briefly, the overall result from this comparative study is in favor of the use of geostatistics in most cases because the method has lived up to its theoretical claims. A good exposition on the theory of geostatistics, the adopted study procedures, conclusions and recommended future research are given in Part I. Part II of this report contains the results of the second and the third study objectives, which are to assess the potential benefits that can be derived by the introduction of the geostatistical method to the current state-of-the-art in uranium reserve estimation method and to be instrumental in generating the acceptance of the new method by practitioners through illustrative examples, assuming its superiority and practicality. These are given in the form of illustrative examples on the use of geostatistics and the accompanying computer program user's guide

Qualitative methods textbooks

OpenAIRE

Barndt, William

2003-01-01

Over the past few years, the number of political science departments offering qualitative methods courses has grown substantially. The number of qualitative methods textbooks has kept pace, providing instructors with an overwhelming array of choices. But how to decide which text to choose from this exhortatory smorgasbord? The scholarship desperately needs evaluated. Yet the task is not entirely straightforward: qualitative methods textbooks reflect the diversity inherent in qualitative metho...

Statistical error estimation of the Feynman-α method using the bootstrap method

International Nuclear Information System (INIS)

Endo, Tomohiro; Yamamoto, Akio; Yagi, Takahiro; Pyeon, Cheol Ho

2016-01-01

Applicability of the bootstrap method is investigated to estimate the statistical error of the Feynman-α method, which is one of the subcritical measurement techniques on the basis of reactor noise analysis. In the Feynman-α method, the statistical error can be simply estimated from multiple measurements of reactor noise, however it requires additional measurement time to repeat the multiple times of measurements. Using a resampling technique called 'bootstrap method' standard deviation and confidence interval of measurement results obtained by the Feynman-α method can be estimated as the statistical error, using only a single measurement of reactor noise. In order to validate our proposed technique, we carried out a passive measurement of reactor noise without any external source, i.e. with only inherent neutron source by spontaneous fission and (α,n) reactions in nuclear fuels at the Kyoto University Criticality Assembly. Through the actual measurement, it is confirmed that the bootstrap method is applicable to approximately estimate the statistical error of measurement results obtained by the Feynman-α method. (author)

The use of the spectral method within the fast adaptive composite grid method

Energy Technology Data Exchange (ETDEWEB)

McKay, S.M.

1994-12-31

The use of efficient algorithms for the solution of partial differential equations has been sought for many years. The fast adaptive composite grid (FAC) method combines an efficient algorithm with high accuracy to obtain low cost solutions to partial differential equations. The FAC method achieves fast solution by combining solutions on different grids with varying discretizations and using multigrid like techniques to find fast solution. Recently, the continuous FAC (CFAC) method has been developed which utilizes an analytic solution within a subdomain to iterate to a solution of the problem. This has been shown to achieve excellent results when the analytic solution can be found. The CFAC method will be extended to allow solvers which construct a function for the solution, e.g., spectral and finite element methods. In this discussion, the spectral methods will be used to provide a fast, accurate solution to the partial differential equation. As spectral methods are more accurate than finite difference methods, the ensuing accuracy from this hybrid method outside of the subdomain will be investigated.

Methods for measurement of electron emission yield under low energy electron-irradiation by collector method and Kelvin probe method

Energy Technology Data Exchange (ETDEWEB)

Tondu, Thomas; Belhaj, Mohamed; Inguimbert, Virginie [Onera, DESP, 2 Avenue Edouard Belin, 31400 Toulouse (France); Onera, DESP, 2 Avenue Edouard Belin, 31400 Toulouse, France and Fondation STAE, 4 allee Emile Monso, BP 84234-31432, Toulouse Cedex 4 (France); Onera, DESP, 2 Avenue Edouard Belin, 31400 Toulouse (France)

2010-09-15

Secondary electron emission yield of gold under electron impact at normal incidence below 50 eV was investigated by the classical collector method and by the Kelvin probe method. The authors show that biasing a collector to ensure secondary electron collection while keeping the target grounded can lead to primary electron beam perturbations. Thus reliable secondary electron emission yield at low primary electron energy cannot be obtained with a biased collector. The authors present two collector-free methods based on current measurement and on electron pulse surface potential buildup (Kelvin probe method). These methods are consistent, but at very low energy, measurements become sensitive to the earth magnetic field (below 10 eV). For gold, the authors can extrapolate total emission yield at 0 eV to 0.5, while a total electron emission yield of 1 is obtained at 40{+-}1 eV.

Methods for measurement of electron emission yield under low energy electron-irradiation by collector method and Kelvin probe method

International Nuclear Information System (INIS)

Tondu, Thomas; Belhaj, Mohamed; Inguimbert, Virginie

2010-01-01

Secondary electron emission yield of gold under electron impact at normal incidence below 50 eV was investigated by the classical collector method and by the Kelvin probe method. The authors show that biasing a collector to ensure secondary electron collection while keeping the target grounded can lead to primary electron beam perturbations. Thus reliable secondary electron emission yield at low primary electron energy cannot be obtained with a biased collector. The authors present two collector-free methods based on current measurement and on electron pulse surface potential buildup (Kelvin probe method). These methods are consistent, but at very low energy, measurements become sensitive to the earth magnetic field (below 10 eV). For gold, the authors can extrapolate total emission yield at 0 eV to 0.5, while a total electron emission yield of 1 is obtained at 40±1 eV.

Rossi Alpha Method

International Nuclear Information System (INIS)

Hansen, G.E.

1985-01-01

The Rossi Alpha Method has proved to be valuable for the determination of prompt neutron lifetimes in fissile assemblies having known reproduction numbers at or near delayed critical. This workshop report emphasizes the pioneering applications of the method by Dr. John D. Orndoff to fast-neutron critical assemblies at Los Alamos. The value of the method appears to disappear for subcritical systems where the Rossi-α is no longer an α-eigenvalue

Semi top-down method combined with earth-bank, an effective method for basement construction.

Science.gov (United States)

Tuan, B. Q.; Tam, Ng M.

2018-04-01

Choosing an appropriate method of deep excavation not only plays a decisive role in technical success, but also in economics of the construction project. Presently, we mainly base on to key methods: “Bottom-up” and “Top-down” construction method. Right now, this paper presents an another method of construction that is “Semi Top-down method combining with earth-bank” in order to take the advantages and limit the weakness of the above methods. The Bottom-up method was improved by using the earth-bank to stabilize retaining walls instead of the bracing steel struts. The Top-down method was improved by using the open cut method for the half of the earthwork quantities.

Stochastic optimization methods

CERN Document Server

Marti, Kurt

2005-01-01

Optimization problems arising in practice involve random parameters. For the computation of robust optimal solutions, i.e., optimal solutions being insensitive with respect to random parameter variations, deterministic substitute problems are needed. Based on the distribution of the random data, and using decision theoretical concepts, optimization problems under stochastic uncertainty are converted into deterministic substitute problems. Due to the occurring probabilities and expectations, approximative solution techniques must be applied. Deterministic and stochastic approximation methods and their analytical properties are provided: Taylor expansion, regression and response surface methods, probability inequalities, First Order Reliability Methods, convex approximation/deterministic descent directions/efficient points, stochastic approximation methods, differentiation of probability and mean value functions. Convergence results of the resulting iterative solution procedures are given.

Etude et simulation du protocole TTEthernet sur un sous-systeme de gestion de vols et adaptation de la planification des tâches a des fins de simulation

Science.gov (United States)

Abidi, Dhafer

TTEthernet is a deterministic network technology that makes enhancements to Layer 2 Quality-of-Service (QoS) for Ethernet. The components that implement its services enrich the Ethernet functionality with distributed fault-tolerant synchronization, robust temporal partitioning bandwidth and synchronous communication with fixed latency and low jitter. TTEthernet services can facilitate the design of scalable, robust, less complex distributed systems and architectures tolerant to faults. Simulation is nowadays an essential step in critical systems design process and represents a valuable support for validation and performance evaluation. CoRE4INET is a project bringing together all TTEthernet simulation models currently available. It is based on the extension of models of OMNeT ++ INET framework. Our objective is to study and simulate the TTEthernet protocol on a flight management subsystem (FMS). The idea is to use CoRE4INET to design the simulation model of the target system. The problem is that CoRE4INET does not offer a task scheduling tool for TTEthernet network. To overcome this problem we propose an adaptation for simulation purposes of a task scheduling approach based on formal specification of network constraints. The use of Yices solver allowed the translation of the formal specification into an executable program to generate the desired transmission plan. A case study allowed us at the end to assess the impact of the arrangement of Time-Triggered frames offsets on the performance of each type of the system traffic.

Light element abundances in a matter-antimatter model of the universe

International Nuclear Information System (INIS)

Aly, J.J.

1978-01-01

This paper is devoted to the problem of light element synthesis in a baryon symmetric Big-Bang cosmology, in which the universe is constituted at the end of the leptonic era by a nucleon-antinucleon emulsion. If the initial typical size of the matter or antimatter regions is sufficiently high to avoid significant neutron annihilation, nucleosynthesis can proceed in this kind of model in the same way as in the conventional Big-Bang. But the abundances of the created light elements can be modified at a later time by interaction of the nuclei with the high energy particles and photons resulting from annihilation. In this article, we consider two specific mechanisms able to change the abundances: a 4 He 'nucleodisruption' process (proposed by Combes et al., 1975), which leads to deuterium production, and 4 He photodisintegration by annihilation γ-rays, which leads to an increase of the 3 He and D production. General relations are established which allow one to compute the abundances of the so created elements when the size l of the matter or antimatter regions and the annihilation rate are given as function of time. These relations are applied to the Omnes model, in which the size l grows by a coalescence mechanism. It is shown that in this model the D and 3 He abundances are much greater than the limits on primordial abundances deduced from the present observations. (orig.) [de

Enhanced magnetoresistance and Griffiths phase induced by Mo substitution in La0.7Ca0.15Sr0.15Mn1-xMoxO3 (0 ≤ x ≤ 0.05)

International Nuclear Information System (INIS)

Narsinga Rao, G; Chen, J W; Neeleshwar, S; Chen, Y Y; Wu, M K

2009-01-01

Structural, magnetic and electrical properties of the La 0.7 Ca 0.15 Sr 0.15 Mn 1-x Mo x O 3 (0 ≤ x ≤ 0.05) compounds have been investigated. Powder x-ray analysis reveals that the sample with x = 0 crystallizes in the rhombohedral (R 3-bar c) structure, whereas in the Mo doped samples the structure can be indexed by an orthorhombic (Pbnm) structure. The important observations of the magnetic and transport properties are: (i) the Mo substitution induces a distinct suppression of the metal-insulator (T MI ) and ferromagnetic (FM)-paramagnetic transition (T C ) and the temperature of T MI was found to be higher than T C in the Mo-doped samples, (ii) the substitution of Mo enhances the magnetoresistance at room temperature, (iii) a large deviation from the Curie-Weiss law well above T C in the Mo substituted samples indicates the existence of a Griffiths phase and (iv) long-range FM order persists in all samples with a linear decrease of saturation moment as x increases. These results are discussed in terms of the Mn-site disorder and opening of strong FM coupling between Mn 2+ -O-Mn 3+ , due to the Mn 2+ ions induced by Mo 6+ at the expense of Mn 4+ ions in the La 0.7 Ca 0.15 Sr 0.15 Mn 1-x Mo x O 3 system.

Transatlantic Integration and Developed Countries Competitiveness Problems

Directory of Open Access Journals (Sweden)

Alexey. A. Sidorov

2016-01-01

Full Text Available Factors and possible consequences of transatlantic integration are elaborated in the article. An overview of the history of transatlantic cooperation is provided. The author highlights the paramount goal of Transatlantic Trade and Investment Partnership (TTIP - strengthening the positions of its parties in the world economy against the backdrop of global competition. Stalemate in Doha round of WTO trade negotiations as well as depressed state of the European economy also contributed to transatlantic integration. Validity of the EU Commission conclusion on TTIP benefits is examined. Results of TTIP econometric modelling are critically assessed. Problems of the EU-US non-tariff liberalization are analyzed. Efficiency of the EU and US labor markets is compared. Low competitiveness of the EU in comparison to the USA and underlying risks for TTIP economic growth and employment are outlined. High unemployment, difficulties of manufacturing (including high-tech industries thereof recovery, adverse general business situation in the EU are among such risks. Various modes of regulatory cooperation and possibility of their adoption in TTIP are considered. Harmonization, erga omnes mutual recognition of regulations, bilateral mutual recognition of regulations, mutual recognition of conformity testing are distinguished. Possible implications of the modes of regulatory cooperation on TTIP members competitiveness, competition with emerging economies and global standard setting are examined. Conflict of TTIP goals and motivations is revealed. The existence of economic factors of transatlantic integration as well as overestimation of TTIP benefits (primarily for the EU economy is concluded.

Diet of Cnesterodon decemmaculatus (Poeciliidae and Jenynsia multidentata (Anablepidae in a hypertrophic shallow lake of Uruguay Dieta de Cnesterodon decemmaculatus (Poeciliidae y Jenynsia multidentata (Anablepidae en un lago hipereutrófico de Uruguay

Directory of Open Access Journals (Sweden)

Federico Quintans

2009-03-01

Full Text Available Se analizaron las dietas de Cnesterodon decemmaculatus (Jenyns, 1842 y Jenynsia multidentata (Jenyns, 1842 en el Lago Rodó, un lago urbano hipereutrófico de Montevideo, Uruguay. Ambas especies mostraron un comportamiento omnívoro. Los ítems más consumidos por C. decemmaculatus fueron zooplancton, perifiton, fitoplancton y detritos; la dieta de J. multidentata incluyó zooplancton, insectos, crustáceos y peces juveniles. Estos resultados sugieren que ambas especies pueden actuar como planctívoros facultativos. La comunidad de peces de este lago se caracteriza por la dominancia de C. decemmaculatus y J. multidentata. Bajo esta condición, la depredación sobre el zooplancton de gran tamaño podría indirectamente estar contribuyendo a una alta abundancia de fitoplancton y una baja transparencia del agua.Diet of Cnesterodon decemmaculatus (Jenyns, 1842 and Jenynsia multidentata (Jenyns, 1842 were analysed in Lake Rodó, an urban hypertrophic lake from Montevideo, Uruguay. Both species displayed omnivory. The most consumed items for C. decemmaculatus were zooplankton, periphyton, phytoplankton and detritus; the diet of J. multidentata included zooplankton, insects, crustaceans and juvenile fish. Our results suggest that both species could be acting as facultative planktivores. The fish community of this lake is characterised by the dominance of C. decemmaculatus and J. multidentata. Under this condition, predation on large-bodied zooplankton could indirectly be contributing to maintain a high phytoplankton abundance and a low water transparency.

Some clues about the interphase reaction between ZnO and MnO2 oxides

International Nuclear Information System (INIS)

Rubio-Marcos, F.; Quesada, A.; Garcia, M.A.; Banares, M.A.; Fierro, J.L.G.; Martin-Gonzalez, M.S.; Costa-Kraemer, J.L.; Fernandez, J.F.

2009-01-01

Raman spectroscopy is used to evidence both the nature of the interphase reaction between ZnO and MnO 2 particles and its kinetic evolution. Zn cations migrate from the ZnO grains during oxygen vacancies formation process and diffuse into the MnO 2 particles leading to an interphase region with an intermediate valence Mn +3 -O-Mn +4 . Large amounts of desorbed Zn cations promote the formation of ZnMn 2 O 4 structure, in addition to the intermediate valence state. The system evolves towards complete formation of the spinel phase at higher thermal treatment times. The reactivity of the ZnO plays an important role in the formation of this interphase. Low-reactivity ZnO powder, in which the oxygen vacancies are previously produced, shows a stabilization of the intermediate valence state with very limited formation of the spinel phase. A clear correlation between the amount of the intermediate state interphase and the magnetic properties has been established. - Graphical abstract: Recently new room temperature interphase magnetism has been reported to appear in ZnO-MnO 2 system. Raman spectroscopy is used to evidence both the nature of the interphase reaction and the kinetic. The interphase evolved towards complete formation of the spinel phase. The reactivity of the ZnO plays an important role in the formation of this interphase. Finally, a clear correlation between the amount of the intermediate valence state and the interphase magnetic properties has been established.

Methods of Software Verification

Directory of Open Access Journals (Sweden)

R. E. Gurin

2015-01-01

Full Text Available This article is devoted to the problem of software verification (SW. Methods of software verification designed to check the software for compliance with the stated requirements such as correctness, system security and system adaptability to small changes in the environment, portability and compatibility, etc. These are various methods both by the operation process and by the way of achieving result. The article describes the static and dynamic methods of software verification and paid attention to the method of symbolic execution. In its review of static analysis are discussed and described the deductive method, and methods for testing the model. A relevant issue of the pros and cons of a particular method is emphasized. The article considers classification of test techniques for each method. In this paper we present and analyze the characteristics and mechanisms of the static analysis of dependencies, as well as their views, which can reduce the number of false positives in situations where the current state of the program combines two or more states obtained both in different paths of execution and in working with multiple object values. Dependences connect various types of software objects: single variables, the elements of composite variables (structure fields, array elements, the size of the heap areas, the length of lines, the number of initialized array elements in the verification code using static methods. The article pays attention to the identification of dependencies within the framework of the abstract interpretation, as well as gives an overview and analysis of the inference tools.Methods of dynamic analysis such as testing, monitoring and profiling are presented and analyzed. Also some kinds of tools are considered which can be applied to the software when using the methods of dynamic analysis. Based on the work a conclusion is drawn, which describes the most relevant problems of analysis techniques, methods of their solutions and

Winter Holts Oscillatory Method: A New Method of Resampling in Time Series.

Directory of Open Access Journals (Sweden)

Muhammad Imtiaz Subhani

2016-12-01

Full Text Available The core proposition behind this research is to create innovative methods of bootstrapping that can be applied in time series data. In order to find new methods of bootstrapping, various methods were reviewed; The data of automotive Sales, Market Shares and Net Exports of the top 10 countries, which includes China, Europe, United States of America (USA, Japan, Germany, South Korea, India, Mexico, Brazil, Spain and, Canada from 2002 to 2014 were collected through various sources which includes UN Comtrade, Index Mundi and World Bank. The findings of this paper confirmed that Bootstrapping for resampling through winter forecasting by Oscillation and Average methods give more robust results than the winter forecasting by any general methods.

The discrete ordinate method in association with the finite-volume method in non-structured mesh; Methode des ordonnees discretes associee a la methode des volumes finis en maillage non structure

Energy Technology Data Exchange (ETDEWEB)

Le Dez, V; Lallemand, M [Ecole Nationale Superieure de Mecanique et d` Aerotechnique (ENSMA), 86 - Poitiers (France); Sakami, M; Charette, A [Quebec Univ., Chicoutimi, PQ (Canada). Dept. des Sciences Appliquees

1997-12-31

The description of an efficient method of radiant heat transfer field determination in a grey semi-transparent environment included in a 2-D polygonal cavity with surface boundaries that reflect the radiation in a purely diffusive manner is proposed, at the equilibrium and in radiation-conduction coupling situation. The technique uses simultaneously the finite-volume method in non-structured triangular mesh, the discrete ordinate method and the ray shooting method. The main mathematical developments and comparative results with the discrete ordinate method in orthogonal curvilinear coordinates are included. (J.S.) 10 refs.

The discrete ordinate method in association with the finite-volume method in non-structured mesh; Methode des ordonnees discretes associee a la methode des volumes finis en maillage non structure

Energy Technology Data Exchange (ETDEWEB)

Le Dez, V.; Lallemand, M. [Ecole Nationale Superieure de Mecanique et d`Aerotechnique (ENSMA), 86 - Poitiers (France); Sakami, M.; Charette, A. [Quebec Univ., Chicoutimi, PQ (Canada). Dept. des Sciences Appliquees

1996-12-31

The description of an efficient method of radiant heat transfer field determination in a grey semi-transparent environment included in a 2-D polygonal cavity with surface boundaries that reflect the radiation in a purely diffusive manner is proposed, at the equilibrium and in radiation-conduction coupling situation. The technique uses simultaneously the finite-volume method in non-structured triangular mesh, the discrete ordinate method and the ray shooting method. The main mathematical developments and comparative results with the discrete ordinate method in orthogonal curvilinear coordinates are included. (J.S.) 10 refs.

Development of 3-D FBR heterogeneous core calculation method based on characteristics method

International Nuclear Information System (INIS)

Takeda, Toshikazu; Maruyama, Manabu; Hamada, Yuzuru; Nishi, Hiroshi; Ishibashi, Junichi; Kitano, Akihiro

2002-01-01

A new 3-D transport calculation method taking into account the heterogeneity of fuel assemblies has been developed by combining the characteristics method and the nodal transport method. In the axial direction the nodal transport method is applied, and the characteristics method is applied to take into account the radial heterogeneity of fuel assemblies. The numerical calculations have been performed to verify 2-D radial calculations of FBR assemblies and partial core calculations. Results are compared with the reference Monte-Carlo calculations. A good agreement has been achieved. It is shown that the present method has an advantage in calculating reaction rates in a small region

Comparison of Monte Carlo method and deterministic method for neutron transport calculation

International Nuclear Information System (INIS)

Mori, Takamasa; Nakagawa, Masayuki

1987-01-01

The report outlines major features of the Monte Carlo method by citing various applications of the method and techniques used for Monte Carlo codes. Major areas of its application include analysis of measurements on fast critical assemblies, nuclear fusion reactor neutronics analysis, criticality safety analysis, evaluation by VIM code, and calculation for shielding. Major techniques used for Monte Carlo codes include the random walk method, geometric expression method (combinatorial geometry, 1, 2, 4-th degree surface and lattice geometry), nuclear data expression, evaluation method (track length, collision, analog (absorption), surface crossing, point), and dispersion reduction (Russian roulette, splitting, exponential transform, importance sampling, corrected sampling). Major features of the Monte Carlo method are as follows: 1) neutron source distribution and systems of complex geometry can be simulated accurately, 2) physical quantities such as neutron flux in a place, on a surface or at a point can be evaluated, and 3) calculation requires less time. (Nogami, K.)

Angular correlation methods

International Nuclear Information System (INIS)

Ferguson, A.J.

1974-01-01

An outline of the theory of angular correlations is presented, and the difference between the modern density matrix method and the traditional wave function method is stressed. Comments are offered on particular angular correlation theoretical techniques. A brief discussion is given of recent studies of gamma ray angular correlations of reaction products recoiling with high velocity into vacuum. Two methods for optimization to obtain the most accurate expansion coefficients of the correlation are discussed. (1 figure, 53 references) (U.S.)

The Box Method

DEFF Research Database (Denmark)

Nielsen, Peter Vilhelm

The velocity level in a room ventilated by jet ventilation is strongly influenced by the supply conditions. The momentum flow in the supply jets controls the air movement in the room and, therefore, it is very important that the inlet conditions and the numerical method can generate a satisfactor...... description of this momentum flow. The Box Method is a practical method for the description of an Air Terminal Device which will save grid points and ensure the right level of the momentum flow....

Decentralized Quasi-Newton Methods

Science.gov (United States)

Eisen, Mark; Mokhtari, Aryan; Ribeiro, Alejandro

2017-05-01

We introduce the decentralized Broyden-Fletcher-Goldfarb-Shanno (D-BFGS) method as a variation of the BFGS quasi-Newton method for solving decentralized optimization problems. The D-BFGS method is of interest in problems that are not well conditioned, making first order decentralized methods ineffective, and in which second order information is not readily available, making second order decentralized methods impossible. D-BFGS is a fully distributed algorithm in which nodes approximate curvature information of themselves and their neighbors through the satisfaction of a secant condition. We additionally provide a formulation of the algorithm in asynchronous settings. Convergence of D-BFGS is established formally in both the synchronous and asynchronous settings and strong performance advantages relative to first order methods are shown numerically.

Dissolution Methods Database

Data.gov (United States)

U.S. Department of Health & Human Services — For a drug product that does not have a dissolution test method in the United States Pharmacopeia (USP), the FDA Dissolution Methods Database provides information on...

The ICARE Method

Science.gov (United States)

Henke, Luke

2010-01-01

The ICARE method is a flexible, widely applicable method for systems engineers to solve problems and resolve issues in a complete and comprehensive manner. The method can be tailored by diverse users for direct application to their function (e.g. system integrators, design engineers, technical discipline leads, analysts, etc.). The clever acronym, ICARE, instills the attitude of accountability, safety, technical rigor and engagement in the problem resolution: Identify, Communicate, Assess, Report, Execute (ICARE). This method was developed through observation of Space Shuttle Propulsion Systems Engineering and Integration (PSE&I) office personnel approach in an attempt to succinctly describe the actions of an effective systems engineer. Additionally it evolved from an effort to make a broadly-defined checklist for a PSE&I worker to perform their responsibilities in an iterative and recursive manner. The National Aeronautics and Space Administration (NASA) Systems Engineering Handbook states, engineering of NASA systems requires a systematic and disciplined set of processes that are applied recursively and iteratively for the design, development, operation, maintenance, and closeout of systems throughout the life cycle of the programs and projects. ICARE is a method that can be applied within the boundaries and requirements of NASA s systems engineering set of processes to provide an elevated sense of duty and responsibility to crew and vehicle safety. The importance of a disciplined set of processes and a safety-conscious mindset increases with the complexity of the system. Moreover, the larger the system and the larger the workforce, the more important it is to encourage the usage of the ICARE method as widely as possible. According to the NASA Systems Engineering Handbook, elements of a system can include people, hardware, software, facilities, policies and documents; all things required to produce system-level results, qualities, properties, characteristics

Ensemble Data Mining Methods

Data.gov (United States)

National Aeronautics and Space Administration — Ensemble Data Mining Methods, also known as Committee Methods or Model Combiners, are machine learning methods that leverage the power of multiple models to achieve...

Simulation of Rossi-α method with analog Monte-Carlo method

International Nuclear Information System (INIS)

Lu Yuzhao; Xie Qilin; Song Lingli; Liu Hangang

2012-01-01

The analog Monte-Carlo code for simulating Rossi-α method based on Geant4 was developed. The prompt neutron decay constant α of six metal uranium configurations in Oak Ridge National Laboratory were calculated. α was also calculated by Burst-Neutron method and the result was consistent with the result of Rossi-α method. There is the difference between results of analog Monte-Carlo simulation and experiment, and the reasons for the difference is the gaps between uranium layers. The influence of gaps decrease as the sub-criticality deepens. The relative difference between results of analog Monte-Carlo simulation and experiment changes from 19% to 0.19%. (authors)

Method Usage in Design : How methods function as mental tools for designers

NARCIS (Netherlands)

Daalhuizen, J.J.

2014-01-01

Methods are means to help designers achieve desired change as efficiently and effectively as possible. Methods can be used to do so in the context of learning - to help teach students how to design on a professional level. Methods can also be used in the context of performance - to help designers

A highly accurate method for determination of dissolved oxygen: Gravimetric Winkler method

International Nuclear Information System (INIS)

Helm, Irja; Jalukse, Lauri; Leito, Ivo

2012-01-01

Highlights: ► Probably the most accurate method available for dissolved oxygen concentration measurement was developed. ► Careful analysis of uncertainty sources was carried out and the method was optimized for minimizing all uncertainty sources as far as practical. ► This development enables more accurate calibration of dissolved oxygen sensors for routine analysis than has been possible before. - Abstract: A high-accuracy Winkler titration method has been developed for determination of dissolved oxygen concentration. Careful analysis of uncertainty sources relevant to the Winkler method was carried out and the method was optimized for minimizing all uncertainty sources as far as practical. The most important improvements were: gravimetric measurement of all solutions, pre-titration to minimize the effect of iodine volatilization, accurate amperometric end point detection and careful accounting for dissolved oxygen in the reagents. As a result, the developed method is possibly the most accurate method of determination of dissolved oxygen available. Depending on measurement conditions and on the dissolved oxygen concentration the combined standard uncertainties of the method are in the range of 0.012–0.018 mg dm −3 corresponding to the k = 2 expanded uncertainty in the range of 0.023–0.035 mg dm −3 (0.27–0.38%, relative). This development enables more accurate calibration of electrochemical and optical dissolved oxygen sensors for routine analysis than has been possible before.

Rubidium-strontium method

International Nuclear Information System (INIS)

Dubansky, A.

1980-01-01

The rubidium-strontium geological dating method is based on the determination of the Rb and Sr isotope ratio in rocks, mainly using mass spectrometry. The method is only practical for silicate minerals and rocks, potassium feldspars and slates. Also described is the rubidium-strontium isochrone method. This, however, requires a significant amount of experimental data and an analysis of large quantities of samples, often of the order of tons. The results are tabulated of rubidium-strontium dating of geological formations in the Czech Socialist Republic. (M.S.)

An improved method for calculation of interface pressure force in PLIC-VOF methods

International Nuclear Information System (INIS)

Sefollahi, M.; Shirani, E.

2004-08-01

Conventional methods for the modeling of surface tension force in Piecewise Linear Interface Calculation-Volume of Fluid (PLIC-VOF) methods, such as Continuum Surface Force (CSF), Continuum Surface Stress (CSS) and also Meier's method, convert the surface tension force into a body force. Not only do they include the force in the interfacial cells but also in the neighboring cells. Thus they produce spurious currents. Also the pressure jump, due to the surface tension, is not calculated accurately in these methods. In this paper a more accurate method for the application of interface force in the computational modeling of free surfaces and interfaces which use PLIC-VOF methods is developed. This method is based on the evaluation of the surface tension force only in the interfacial cells and not the neighboring cells. Also the normal and the interface surface area needed for the calculation of the surface tension force is calculated more accurately. The present method is applied to a two-dimensional motionless drop of liquid and a bubble of gas as well as a non-circular two-dimensional drop, which oscillates due to the surface tension force, in an initially stagnant fluid with no gravity force. The results are compared with the results of the cases when CSF, CSS and Meier's methods are used. It is shown that the present method calculates pressure jump at the interface more accurately and produces less spurious currents comparing to CSS an CSF models. (author)

Methods That Matter: Integrating Mixed Methods for More Effective Social Science Research

Science.gov (United States)

Hay, M. Cameron, Ed.

2016-01-01

To do research that really makes a difference--the authors of this book argue--social scientists need questions and methods that reflect the complexity of the world. Bringing together a consortium of voices across a variety of fields, "Methods that Matter" offers compelling and successful examples of mixed methods research that do just…

Wielandt method applied to the diffusion equations discretized by finite element nodal methods

International Nuclear Information System (INIS)

Mugica R, A.; Valle G, E. del

2003-01-01

Nowadays the numerical methods of solution to the diffusion equation by means of algorithms and computer programs result so extensive due to the great number of routines and calculations that should carry out, this rebounds directly in the execution times of this programs, being obtained results in relatively long times. This work shows the application of an acceleration method of the convergence of the classic method of those powers that it reduces notably the number of necessary iterations for to obtain reliable results, what means that the compute times they see reduced in great measure. This method is known in the literature like Wielandt method and it has incorporated to a computer program that is based on the discretization of the neutron diffusion equations in plate geometry and stationary state by polynomial nodal methods. In this work the neutron diffusion equations are described for several energy groups and their discretization by means of those called physical nodal methods, being illustrated in particular the quadratic case. It is described a model problem widely described in the literature which is solved for the physical nodal grade schemes 1, 2, 3 and 4 in three different ways: to) with the classic method of the powers, b) method of the powers with the Wielandt acceleration and c) method of the powers with the Wielandt modified acceleration. The results for the model problem as well as for two additional problems known as benchmark problems are reported. Such acceleration method can also be implemented to problems of different geometry to the proposal in this work, besides being possible to extend their application to problems in 2 or 3 dimensions. (Author)

Nanotube structures, methods of making nanotube structures, and methods of accessing intracellular space

Science.gov (United States)

VanDersarl, Jules J.; Xu, Alexander M.; Melosh, Nicholas A.; Tayebi, Noureddine

2016-02-23

In accordance with the purpose(s) of the present disclosure, as embodied and broadly described herein, embodiments of the present disclosure, in one aspect, relate to methods of making a structure including nanotubes, a structure including nanotubes, methods of delivering a fluid to a cell, methods of removing a fluid to a cell, methods of accessing intracellular space, and the like.

Catalytic reforming methods

Science.gov (United States)

Tadd, Andrew R; Schwank, Johannes

2013-05-14

A catalytic reforming method is disclosed herein. The method includes sequentially supplying a plurality of feedstocks of variable compositions to a reformer. The method further includes adding a respective predetermined co-reactant to each of the plurality of feedstocks to obtain a substantially constant output from the reformer for the plurality of feedstocks. The respective predetermined co-reactant is based on a C/H/O atomic composition for a respective one of the plurality of feedstocks and a predetermined C/H/O atomic composition for the substantially constant output.

FREEZING AND THAWING TIME PREDICTION METHODS OF FOODS II: NUMARICAL METHODS

Directory of Open Access Journals (Sweden)

Yahya TÜLEK

1999-03-01

Full Text Available Freezing is one of the excellent methods for the preservation of foods. If freezing and thawing processes and frozen storage method are carried out correctly, the original characteristics of the foods can remain almost unchanged over an extended periods of time. It is very important to determine the freezing and thawing time period of the foods, as they strongly influence the both quality of food material and process productivity and the economy. For developing a simple and effectively usable mathematical model, less amount of process parameters and physical properties should be enrolled in calculations. But it is a difficult to have all of these in one prediction method. For this reason, various freezing and thawing time prediction methods were proposed in literature and research studies have been going on.

Divergence-Conforming Discontinuous Galerkin Methods and $C^0$ Interior Penalty Methods

KAUST Repository

Kanschat, Guido

2014-01-01

© 2014 Society for Industrial and Applied Mathematics. In this paper, we show that recently developed divergence-conforming methods for the Stokes problem have discrete stream functions. These stream functions in turn solve a continuous interior penalty problem for biharmonic equations. The equivalence is established for the most common methods in two dimensions based on interior penalty terms. Then, extensions of the concept to discontinuous Galerkin methods defined through lifting operators, for different weak formulations of the Stokes problem, and to three dimensions are discussed. Application of the equivalence result yields an optimal error estimate for the Stokes velocity without involving the pressure. Conversely, combined with a recent multigrid method for Stokes flow, we obtain a simple and uniform preconditioner for harmonic problems with simply supported and clamped boundary.

Earthquake prediction by Kina Method

International Nuclear Information System (INIS)

Kianoosh, H.; Keypour, H.; Naderzadeh, A.; Motlagh, H.F.

2005-01-01

Earthquake prediction has been one of the earliest desires of the man. Scientists have worked hard to predict earthquakes for a long time. The results of these efforts can generally be divided into two methods of prediction: 1) Statistical Method, and 2) Empirical Method. In the first method, earthquakes are predicted using statistics and probabilities, while the second method utilizes variety of precursors for earthquake prediction. The latter method is time consuming and more costly. However, the result of neither method has fully satisfied the man up to now. In this paper a new method entitled 'Kiana Method' is introduced for earthquake prediction. This method offers more accurate results yet lower cost comparing to other conventional methods. In Kiana method the electrical and magnetic precursors are measured in an area. Then, the time and the magnitude of an earthquake in the future is calculated using electrical, and in particular, electrical capacitors formulas. In this method, by daily measurement of electrical resistance in an area we make clear that the area is capable of earthquake occurrence in the future or not. If the result shows a positive sign, then the occurrence time and the magnitude can be estimated by the measured quantities. This paper explains the procedure and details of this prediction method. (authors)

Isotope methods in hydrology

International Nuclear Information System (INIS)

Moser, H.; Rauert, W.

1980-01-01

Of the investigation methods used in hydrology, tracer methods hold a special place as they are the only ones which give direct insight into the movement and distribution processes taking place in surface and ground waters. Besides the labelling of water with salts and dyes, as in the past, in recent years the use of isotopes in hydrology, in water research and use, in ground-water protection and in hydraulic engineering has increased. This by no means replaces proven methods of hydrological investigation but tends rather to complement and expand them through inter-disciplinary cooperation. The book offers a general introduction to the application of various isotope methods to specific hydrogeological and hydrological problems. The idea is to place the hydrogeologist and the hydrologist in the position to recognize which isotope method will help him solve his particular problem or indeed, make a solution possible at all. He should also be able to recognize what the prerequisites are and what work and expenditure the use of such methods involves. May the book contribute to promoting cooperation between hydrogeologists, hydrologists, hydraulic engineers and isotope specialists, and thus supplement proven methods of investigation in hydrological research and water utilization and protection wherever the use of isotope methods proves to be of advantage. (orig./HP) [de

Single-Case Designs and Qualitative Methods: Applying a Mixed Methods Research Perspective

Science.gov (United States)

Hitchcock, John H.; Nastasi, Bonnie K.; Summerville, Meredith

2010-01-01

The purpose of this conceptual paper is to describe a design that mixes single-case (sometimes referred to as single-subject) and qualitative methods, hereafter referred to as a single-case mixed methods design (SCD-MM). Minimal attention has been given to the topic of applying qualitative methods to SCD work in the literature. These two…

Radiochemistry methods in DOE Methods for Evaluating Environmental and Waste Management Samples: Addressing new challenges

International Nuclear Information System (INIS)

Fadeff, S.K.; Goheen, S.C.; Riley, R.G.

1994-01-01

Radiochemistry methods in Department of Energy Methods for Evaluating Environmental and Waste Management Samples (DOE Methods) add to the repertoire of other standard methods in support of U.S. Department of Energy environmental restoration and waste management (DOE/EM) radiochemical characterization activities. Current standard sources of radiochemistry methods are not always applicable for evaluating DOE/EM samples. Examples of current sources include those provided by the US Environmental Protection Agency, the American Society for Testing and Materials, Standard Methods for the Examination of Water and Wastewater, and Environmental Measurements Laboratory Procedures Manual (HASL-300). The applicability of these methods is generally limited to specific matrices (usually water), low-level radioactive samples, and a limited number of analytes. DOE Methods complements these current standard methods by addressing the complexities of EM characterization needs. The process for determining DOE/EM radiochemistry characterization needs is discussed. In this context of DOE/EM needs, the applicability of other sources of standard radiochemistry methods is defined, and gaps in methodology are identified. Current methods in DOE Methods and the EM characterization needs they address are discussed. Sources of new methods and the methods incorporation process are discussed. The means for individuals to participate in (1) identification of DOE/EM needs, (2) the methods incorporation process, and (3) submission of new methods are identified

The Generalized Sturmian Method

DEFF Research Database (Denmark)

Avery, James Emil

2011-01-01

these ideas clearly so that they become more accessible. By bringing together these non-standard methods, the book intends to inspire graduate students, postdoctoral researchers and academics to think of novel approaches. Is there a method out there that we have not thought of yet? Can we design a new method...... generations of researchers were left to work out how to achieve this ambitious goal for molecular systems of ever-increasing size. This book focuses on non-mainstream methods to solve the molecular electronic Schrödinger equation. Each method is based on a set of core ideas and this volume aims to explain...

Conformable variational iteration method

Directory of Open Access Journals (Sweden)

Omer Acan

2017-02-01

Full Text Available In this study, we introduce the conformable variational iteration method based on new defined fractional derivative called conformable fractional derivative. This new method is applied two fractional order ordinary differential equations. To see how the solutions of this method, linear homogeneous and non-linear non-homogeneous fractional ordinary differential equations are selected. Obtained results are compared the exact solutions and their graphics are plotted to demonstrate efficiency and accuracy of the method.

A rapid method for soil cement design : Louisiana slope value method.

Science.gov (United States)

1964-03-01

The current procedure used by the Louisiana Department of Highways for laboratory design of cement stabilized soil base and subbase courses is taken from standard AASHO test methods, patterned after Portland Cement Association criteria. These methods...

Inventory of LCIA selection methods for assessing toxic releases. Methods and typology report part B

DEFF Research Database (Denmark)

Larsen, Henrik Fred; Birkved, Morten; Hauschild, Michael Zwicky

method(s) in Work package 8 (WP8) of the OMNIITOX project. The selection methods and the other CRS methods are described in detail, a set of evaluation criteria are developed and the methods are evaluated against these criteria. This report (Deliverable 11B (D11B)) gives the results from task 7.1d, 7.1e......This report describes an inventory of Life Cycle Impact Assessment (LCIA) selection methods for assessing toxic releases. It consists of an inventory of current selection methods and other Chemical Ranking and Scoring (CRS) methods assessed to be relevant for the development of (a) new selection...... and 7.1f of WP 7 for selection methods. The other part of D11 (D11A) is reported in another report and deals with characterisation methods. A selection method is a method for prioritising chemical emissions to be included in an LCIA characterisation of toxic releases, i.e. calculating indicator scores...

New mixed finite-element methods

International Nuclear Information System (INIS)

Franca, L.P.

1987-01-01

New finite-element methods are proposed for mixed variational formulations. The methods are constructed by adding to the classical Galerkin method various least-squares like terms. The additional terms involve integrals over element interiors, and include mesh-parameter dependent coefficients. The methods are designed to enhance stability. Consistency is achieved in the sense that exact solutions identically satisfy the variational equations.Applied to several problems, simple finite-element interpolations are rendered convergent, including convenient equal-order interpolations generally unstable within the Galerkin approach. The methods are subdivided into two classes according to the manner in which stability is attained: (1) circumventing Babuska-Brezzi condition methods; (2) satisfying Babuska-Brezzi condition methods. Convergence is established for each class of methods. Applications of the first class of methods to Stokes flow and compressible linear elasticity are presented. The second class of methods is applied to the Poisson, Timoshenko beam and incompressible elasticity problems. Numerical results demonstrate the good stability and accuracy of the methods, and confirm the error estimates

Lesson learned - CGID based on the Method 1 and Method 2 for digital equipment

International Nuclear Information System (INIS)

Hwang, Wonil; Sohn, Kwang Young; Cho, Chang Hwan; Kim, Sung Jong

2015-01-01

The acceptance methods associated with commercial-grade dedication are the following: 1) Special tests and inspection (Method 1) 2) Commercial-grade surveys (Method 2) 3) Source verification (Method 3) 4) An acceptable item and supplier performance record (Method 4) Special tests and inspections, often referred to as Method 1, are performed by the dedicating entity after the item is received to verify selected critical characteristics. Conducting a commercial-grade survey of a supplier is often referred to as Method 2. Supplier audits to verify compliance with a nuclear QA program do not meet the intent of a commercial-grade survey. Source verification, often referred to as Method 3, entails verification of critical characteristics during manufacture and testing of the item being procured. The performance history (good or bad) of the item and supplier is a consideration when determining the use of the other acceptance methods and the rigor with which they are used on a case-by-case basis. Some digital equipment system has the delivery reference and its operating history for Nuclear Power Plant as far as surveyed. However it was found that there is difficulty in collecting this of supporting data sheet, so that supplier usually decide to conduct the CGID based on the Method-1 and Method-2 based on the initial qualification likely. It is conceived that the Method-4 might be a better approach for CGID(Commercial Grade Item Dedication) even if there are some difficulties in data package for justifying CGID from the vendor and operating organization. This paper present the lesson learned from the consulting for Method-1 and 2 for digital equipment dedication. Considering all the information above, there are a couple of issues to remind in order to perform the CGID for Method-2. In doing commercial grade survey based on Method 2, quality personnel as well as technical engineer shall be involved for integral dedication. Other than this, the review of critical

Statistical methods

CERN Document Server

Szulc, Stefan

1965-01-01

Statistical Methods provides a discussion of the principles of the organization and technique of research, with emphasis on its application to the problems in social statistics. This book discusses branch statistics, which aims to develop practical ways of collecting and processing numerical data and to adapt general statistical methods to the objectives in a given field.Organized into five parts encompassing 22 chapters, this book begins with an overview of how to organize the collection of such information on individual units, primarily as accomplished by government agencies. This text then

Sieve methods

CERN Document Server

Halberstam, Heine

2011-01-01

Derived from the techniques of analytic number theory, sieve theory employs methods from mathematical analysis to solve number-theoretical problems. This text by a noted pair of experts is regarded as the definitive work on the subject. It formulates the general sieve problem, explores the theoretical background, and illustrates significant applications.""For years to come, Sieve Methods will be vital to those seeking to work in the subject, and also to those seeking to make applications,"" noted prominent mathematician Hugh Montgomery in his review of this volume for the Bulletin of the Ameri

Differential equation method

International Nuclear Information System (INIS)

Kotikov, A.V.

1993-01-01

A new method of massive Feynman diagrams calculation is presented. It provides a fairly simple procedure to obtain the result without the D-space integral calculation (for the dimensional regularization). Some diagrams are calculated as an illustration of this method capacities. (author). 7 refs

Detection methods for irradiated food

International Nuclear Information System (INIS)

Stevenson, M.H.

1993-01-01

The plenary lecture gives a brief historical review of the development of methods for the detection of food irradiation and defines the demands on such methods. The methods described in detail are as follows: 1) Physical methods: As examples of luminescence methods, thermoluminescence and chermoluminescence are mentioned; ESR spectroscopy is discussed in detail by means of individual examples (crustaceans, frutis and vegetables, spieces and herbs, nuts). 2) Chemical methods: Examples given for these are methods that make use of alterations in lipids through radiation (formation of long-chain hydrocarbons, formation of 2-alkyl butanones), respectively radiation-induced alterations in the DNA. 3) Microbiological methods. An extensive bibliography is appended. (VHE) [de

A local level set method based on a finite element method for unstructured meshes

International Nuclear Information System (INIS)

Ngo, Long Cu; Choi, Hyoung Gwon

2016-01-01

A local level set method for unstructured meshes has been implemented by using a finite element method. A least-square weighted residual method was employed for implicit discretization to solve the level set advection equation. By contrast, a direct re-initialization method, which is directly applicable to the local level set method for unstructured meshes, was adopted to re-correct the level set function to become a signed distance function after advection. The proposed algorithm was constructed such that the advection and direct reinitialization steps were conducted only for nodes inside the narrow band around the interface. Therefore, in the advection step, the Gauss–Seidel method was used to update the level set function using a node-by-node solution method. Some benchmark problems were solved by using the present local level set method. Numerical results have shown that the proposed algorithm is accurate and efficient in terms of computational time

A local level set method based on a finite element method for unstructured meshes

Energy Technology Data Exchange (ETDEWEB)

Ngo, Long Cu; Choi, Hyoung Gwon [School of Mechanical Engineering, Seoul National University of Science and Technology, Seoul (Korea, Republic of)

2016-12-15

A local level set method for unstructured meshes has been implemented by using a finite element method. A least-square weighted residual method was employed for implicit discretization to solve the level set advection equation. By contrast, a direct re-initialization method, which is directly applicable to the local level set method for unstructured meshes, was adopted to re-correct the level set function to become a signed distance function after advection. The proposed algorithm was constructed such that the advection and direct reinitialization steps were conducted only for nodes inside the narrow band around the interface. Therefore, in the advection step, the Gauss–Seidel method was used to update the level set function using a node-by-node solution method. Some benchmark problems were solved by using the present local level set method. Numerical results have shown that the proposed algorithm is accurate and efficient in terms of computational time.

Language Practitioners' Reflections on Method-Based and Post-Method Pedagogies

Science.gov (United States)

Soomro, Abdul Fattah; Almalki, Mansoor S.

2017-01-01

Method-based pedagogies are commonly applied in teaching English as a foreign language all over the world. However, in the last quarter of the 20th century, the concept of such pedagogies based on the application of a single best method in EFL started to be viewed with concerns by some scholars. In response to the growing concern against the…

The conformal method and the conformal thin-sandwich method are the same

International Nuclear Information System (INIS)

Maxwell, David

2014-01-01

The conformal method developed in the 1970s and the more recent Lagrangian and Hamiltonian conformal thin-sandwich methods are techniques for finding solutions of the Einstein constraint equations. We show that they are manifestations of a single conformal method: there is a straightforward way to convert back and forth between the parameters for these methods so that the corresponding solutions of the Einstein constraint equations agree. The unifying idea is the need to clearly distinguish tangent and cotangent vectors to the space of conformal classes on a manifold, and we introduce a vocabulary for working with these objects without reference to a particular representative background metric. As a consequence of these conceptual advantages, we demonstrate how to strengthen previous near-CMC (constant mean curvature) existence and non-existence theorems for the original conformal method to include metrics with scalar curvatures that change sign. (paper)

Detection method of internal leakage from valve using acoustic method

International Nuclear Information System (INIS)

Kumagai, Horomichi

1990-01-01

The purpose of this study is to estimate the availability of acoustic method for detecting the internal leakage of valves at power plants. Experiments have been carried out on the characteristics of acoustic noise caused by the leak simulated flow. From the experimental results, the mechanism of the acoustic noisegenerated from flow, the relation between acoustic intensity and leak flow velocity, and the characteristics of the acoustic frequency spectrum were clarified. The acoustic method was applied to valves at site, and the background noises were measured in abnormal plant conditions. When the background level is higher than the acoustic signal, the difference between the background noise frequency spectrum and the acoustic signal spectrum provide a very useful leak detection method. (author)

Methods of choosing the best methods of building a dynamic visualization environment

Directory of Open Access Journals (Sweden)

В.А. Бородін

2009-02-01

Full Text Available In work is offered the methods of the choice of the most optimum combination of the methods which provides the building of the visual image of the dynamic scenes on the displays of real-time ANGS, which defines the optimal percent of the use for each of m software programs, that are in complex, n methods, optimizing velocity of the image of the visual image. The calculation of the ratio is carried out using the details of this problem to the linear programming problem. In work is offered the calculation of the optimum methods for building a visual image of a dynamic scenes for a specific task.

VALUATION METHODS- LITERATURE REVIEW

OpenAIRE

Dorisz Talas

2015-01-01

This paper is a theoretical overview of the often used valuation methods with the help of which the value of a firm or its equity is calculated. Many experts (including Aswath Damodaran, Guochang Zhang and CA Hozefa Natalwala) classify the methods. The basic models are based on discounted cash flows. The main method uses the free cash flow for valuation, but there are some newer methods that reveal and correct the weaknesses of the traditional models. The valuation of flexibility of managemen...

Basic Finite Element Method

International Nuclear Information System (INIS)

Lee, Byeong Hae

1992-02-01

This book gives descriptions of basic finite element method, which includes basic finite element method and data, black box, writing of data, definition of VECTOR, definition of matrix, matrix and multiplication of matrix, addition of matrix, and unit matrix, conception of hardness matrix like spring power and displacement, governed equation of an elastic body, finite element method, Fortran method and programming such as composition of computer, order of programming and data card and Fortran card, finite element program and application of nonelastic problem.

Method of chronokinemetrical invariants

International Nuclear Information System (INIS)

Vladimirov, Yu.S.; Shelkovenko, A.Eh.

1976-01-01

A particular case of a general dyadic method - the method of chronokinemetric invariants is formulated. The time-like dyad vector is calibrated in a chronometric way, and the space-like vector - in a kinemetric way. Expressions are written for the main physical-geometrical values of the dyadic method and for differential operators. The method developed may be useful for predetermining the reference system of a single observer, and also for studying problems connected with emission and absorption of gravitational and electromagnetic waves [ru

Methods of dating

Energy Technology Data Exchange (ETDEWEB)

Gatty, B

1986-04-01

Scientific methods of dating, born less than thirty years ago, have recently improved tremendously. First the dating principles will be given; then it will be explained how, through natural radioactivity, we can have access to the age of an event or an object; the case of radiocarbon will be especially emphasized. The principle of relative methods such as thermoluminescence or paleomagnetism will also be shortly given. What is the use for dating. The fields of its application are numerous; through these methods, relatively precise ages can be given to the major events which have been keys in the history of universe, life and man; thus, dating is a useful scientific tool in astrophysics, geology, biology, anthropology and archeology. Even if certain ages are still subject to controversies, we can say that these methods have confirmed evolution's continuity, be it on a cosmic, biologic or human scale, where ages are measured in billions, millions or thousands of years respectively.

Combining static and dynamic modelling methods: a comparison of four methods

NARCIS (Netherlands)

Wieringa, Roelf J.

1995-01-01

A conceptual model of a system is an explicit description of the behaviour required of the system. Methods for conceptual modelling include entity-relationship (ER) modelling, data flow modelling, Jackson System Development (JSD) and several object-oriented analysis method. Given the current

Possibilities of roentgenological method

International Nuclear Information System (INIS)

Sivash, Eh.S.; Sal'man, M.M.

1980-01-01

Literary and experimental data on estimating possibilities of roentgenologic investigations using an electron optical amplifier, X-ray television and roentgen cinematography are generalized. Different methods of studying gastro-intestinal tract are compared. The advantage of the roentgenologic method over the endoscopic method after stomach resection is shown [ru

Application of the photoelastic experimental hybrid method with new numerical method to the high stress distribution

International Nuclear Information System (INIS)

Hawong, Jai Sug; Lee, Dong Hun; Lee, Dong Ha; Tche, Konstantin

2004-01-01

In this research, the photoelastic experimental hybrid method with Hook-Jeeves numerical method has been developed: This method is more precise and stable than the photoelastic experimental hybrid method with Newton-Rapson numerical method with Gaussian elimination method. Using the photoelastic experimental hybrid method with Hook-Jeeves numerical method, we can separate stress components from isochromatics only and stress intensity factors and stress concentration factors can be determined. The photoelastic experimental hybrid method with Hook-Jeeves had better be used in the full field experiment than the photoelastic experimental hybrid method with Newton-Rapson with Gaussian elimination method

Development of thermal stress screening method. Application of green function method

International Nuclear Information System (INIS)

Furuhashi, Ichiro; Shibamoto, Hiroshi; Kasahara, Naoto

2004-01-01

This work was achieved for the development of the screening method of thermal transient stresses in FBR components. We proposed an approximation method for evaluations of thermal stress under variable heat transfer coefficients (non-linear problems) using the Green functions of thermal stresses with constant heat transfer coefficients (linear problems). Detailed thermal stress analyses provided Green functions for a skirt structure and a tube-sheet of Intermediate Heat Exchanger. The upper bound Green functions were obtained by the analyses using those upper bound heat transfer coefficients. The medium and the lower bound Green functions were got by the analyses of those under medium and the lower bound heat transfer coefficients. Conventional evaluations utilized the upper bound Green functions. On the other hand, we proposed a new evaluation method by using the upper bound, medium and the lower bound Green functions. The comparison of above results gave the results as follows. The conventional evaluations were conservative and appropriate for the cases under one fluid thermal transient structure such as the skirt. The conventional evaluations were generally conservative for the complicated structures under two or more fluids thermal transients such as the tube-sheet. But the danger locations could exists for the complicated structures under two or more fluids transients, namely the conventional evaluations were non-conservative. The proposed evaluations gave good estimations for these complicated structures. Though above results, we have made the basic documents of the screening method of thermal transient stresses using the conventional method and the new method. (author)

Critical comparison between equation of motion-Green's function methods and configuration interaction methods: analysis of methods and applications

International Nuclear Information System (INIS)

Freed, K.F.; Herman, M.F.; Yeager, D.L.

1980-01-01

A description is provided of the common conceptual origins of many-body equations of motion and Green's function methods in Liouville operator formulations of the quantum mechanics of atomic and molecular electronic structure. Numerical evidence is provided to show the inadequacies of the traditional strictly perturbative approaches to these methods. Nonperturbative methods are introduced by analogy with techniques developed for handling large configuration interaction calculations and by evaluating individual matrix elements to higher accuracy. The important role of higher excitations is exhibited by the numerical calculations, and explicit comparisons are made between converged equations of motion and configuration interaction calculations for systems where a fundamental theorem requires the equality of the energy differences produced by these different approaches. (Auth.)

Structural reliability calculation method based on the dual neural network and direct integration method.

Science.gov (United States)

Li, Haibin; He, Yun; Nie, Xiaobo

2018-01-01

Structural reliability analysis under uncertainty is paid wide attention by engineers and scholars due to reflecting the structural characteristics and the bearing actual situation. The direct integration method, started from the definition of reliability theory, is easy to be understood, but there are still mathematics difficulties in the calculation of multiple integrals. Therefore, a dual neural network method is proposed for calculating multiple integrals in this paper. Dual neural network consists of two neural networks. The neural network A is used to learn the integrand function, and the neural network B is used to simulate the original function. According to the derivative relationships between the network output and the network input, the neural network B is derived from the neural network A. On this basis, the performance function of normalization is employed in the proposed method to overcome the difficulty of multiple integrations and to improve the accuracy for reliability calculations. The comparisons between the proposed method and Monte Carlo simulation method, Hasofer-Lind method, the mean value first-order second moment method have demonstrated that the proposed method is an efficient and accurate reliability method for structural reliability problems.

Dieta y ecomorfología de la ictiofauna del arroyo Manantiales, provincia de Buenos Aires, Argentina Diet and ecomorphology of the ichthyofauna of Manantiales stream, Buenos Aires province, Argentina

Directory of Open Access Journals (Sweden)

Eduardo M Fernández

2012-06-01

Full Text Available Se estudio la correlación entre dieta y morfología de 19 especies de peces del arroyo Manantiales, cabecera del río samborombón, provincia de Buenos Aires, Argentina. Las especies fueron clasificadas en cuatro grupos tróficos: carnívoros, omnívoros, insectívoros y detritívoros- alguívoros. Se analizaron 12 atributos ecomor-fológicos relacionados con el uso del hábitat y la alimentación con el fin de distinguir patrones ecomorfológicos de las especies y de las especies con el alimento consumido. Se utilizaron técnicas de análisis univariado y multivariado para determinar agrupamientos de especies utilizando los atributos ecomorfológicos y la dieta como descriptores. Los carnívoros se relacionaron con un buen desarrollo de cabeza, boca, aletas caudal y pectoral; y en general con cuerpos comprimidos. Los omnívoros constituyeron un grupo más heterogéneo. Las formas nectónicas de este grupo se relacionaron con un cuerpo comprimido, ojos laterales y tamaño relativamente pequeño de las aletas pectorales y aleta caudal; las formas nectobentónicas se relacionaron con boca pequeña, cuerpo fusiforme y pedúnculo caudal largo; y las formas bentónicas, con cuerpo deprimido, ojos de posición dorsal, boca ínfera y tubo digestivo largo. La única especie nectónica consumidora de insectos sobre la superficie se caracterizó por un cuerpo fuertemente comprimido, ojos laterales, aleta caudal grande y boca grande orientada hacia arriba. Los detritívoros-alguívoros presentaron un tubo digestivo largo, boca ínfera o terminal y aletas caudales largas. La relación significativa dieta-ecomorfología permite sostener que peces de dieta similar convergen hacia atributos ecomorfológicos comunes.The present study addresses the correlation between diet and morphology of 19 fish species that inhabit the Manantiales stream at the headwaters of the samborombón river, Buenos Aires province, Argentina. The species were classified into four

Consumption and digestion of animal food by rocky intertidal herbivores: an evaluation of digestive flexibility and omnivory in three grazing species Consumo y digestión de alimento animal por herbívoros del intermareal rocoso: evaluación de flexibilidad digestiva y omnivoría en tres especies de pastoreadores

Directory of Open Access Journals (Sweden)

Patricio A Camus

2009-01-01

generalizado, consistente e importante, sugiriendo que algunos de estos herbívoros pueden ser realmente omnívoros. Por tanto, se examinó la capacidad de tres herbívoros chilenos comunes para digerir alimento animal: las lapas Fissurella limbata y Fissurella pida, y el poliplacóforo Chiton granosus. Para cada especie, se efectuaron experimentos de alimentación sin elección usando alimentos artificiales basados en tejido animal o algal de algunas de sus presas frecuentes (Ulva rigida, Perumytilus purpuratus. Luego de los ensayos de alimentación se evaluó la actividad proteolítica total (disponibilidad de aminoácidos libres en sus contenidos digestivos, y como referencia, se determinó la actividad en animales obtenidos directamente desde condiciones de terreno. Se encontró que las tres especies fueron capaces de comer alimento animal, y este consumo no fue significativamente distinto al de alimento algal, sugiriendo que ambos alimentos fueron no sólo comestibles sino al menos similarmente palatables. Además, se detectaron niveles comparables de actividad proteolítica bajo las tres condiciones de alimentación en las tres especies, sin diferencias estadísticas en C. granosus, pero con una actividad significativamente más alta con alimento animal en F. limbata y con alimento algal en F. pida. Los datos muestran la alta flexibilidad digestiva de estas especies, sugiriendo su capacidad para modulación adaptativa y la posibilidad de que sean verdaderos omnívoros. Se discuten las implicancias de estos resultados sobre la visión actual de la estructura de tramas tróficas del intermareal rocoso.

Method Development in Forensic Toxicology.

Science.gov (United States)

Peters, Frank T; Wissenbach, Dirk K; Busardo, Francesco Paolo; Marchei, Emilia; Pichini, Simona

2017-01-01

In the field of forensic toxicology, the quality of analytical methods is of great importance to ensure the reliability of results and to avoid unjustified legal consequences. A key to high quality analytical methods is a thorough method development. The presented article will provide an overview on the process of developing methods for forensic applications. This includes the definition of the method's purpose (e.g. qualitative vs quantitative) and the analytes to be included, choosing an appropriate sample matrix, setting up separation and detection systems as well as establishing a versatile sample preparation. Method development is concluded by an optimization process after which the new method is subject to method validation. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

Structural Reliability Methods

DEFF Research Database (Denmark)

Ditlevsen, Ove Dalager; Madsen, H. O.

The structural reliability methods quantitatively treat the uncertainty of predicting the behaviour and properties of a structure given the uncertain properties of its geometry, materials, and the actions it is supposed to withstand. This book addresses the probabilistic methods for evaluation...... of structural reliability, including the theoretical basis for these methods. Partial safety factor codes under current practice are briefly introduced and discussed. A probabilistic code format for obtaining a formal reliability evaluation system that catches the most essential features of the nature...... of the uncertainties and their interplay is the developed, step-by-step. The concepts presented are illustrated by numerous examples throughout the text....

DISCOURSE ON METHODS.

Science.gov (United States)

BOUCHER, JOHN G.

THE AUTHOR STATES THAT BEFORE PRESENT FOREIGN LANGUAGE TEACHING METHODS CAN BE DISCUSSED INTELLIGENTLY, THE RESEARCH IN PSYCHOLOGY AND LINGUISTICS WHICH HAS INFLUENCED THE DEVELOPMENT OF THESE METHODS MUST BE CONSIDERED. MANY FOREIGN LANGUAGE TEACHERS WERE BEGINNING TO FEEL COMFORTABLE WITH THE AUDIOLINGUAL APPROACH WHEN NOAM CHOMSKY, IN HIS 1966…

O-hydroxy-functionalized diamines, polymides, methods of making each, and methods of use

KAUST Repository

Ma, Xiaohua; Ghanem, Bader S.; Pinnau, Ingo

2016-01-01

Embodiments of the present disclosure provide for an ortho (o)-hydroxy-functionalized diamine, a method of making an o-hydroxy-functionalized diamine, an o-hydroxy-functionalized diamine-based polyimide, a method of making an o-hydroxy-functionalized diamine imide, methods of gas separation, and the like.

O-hydroxy-functionalized diamines, polymides, methods of making each, and methods of use

KAUST Repository

Ma, Xiaohua

2016-01-21

Embodiments of the present disclosure provide for an ortho (o)-hydroxy-functionalized diamine, a method of making an o-hydroxy-functionalized diamine, an o-hydroxy-functionalized diamine-based polyimide, a method of making an o-hydroxy-functionalized diamine imide, methods of gas separation, and the like.

The Validation of NAA Method Used as Test Method in Serpong NAA Laboratory

International Nuclear Information System (INIS)

Rina-Mulyaningsih, Th.

2004-01-01

The Validation Of NAA Method Used As Test Method In Serpong NAA Laboratory. NAA Method is a non standard testing method. The testing laboratory shall validate its using method to ensure and confirm that it is suitable with application. The validation of NAA methods have been done with the parameters of accuracy, precision, repeatability and selectivity. The NIST 1573a Tomato Leaves, NIES 10C Rice flour unpolished and standard elements were used in this testing program. The result of testing with NIST 1573a showed that the elements of Na, Zn, Al and Mn are met from acceptance criteria of accuracy and precision, whereas Co is rejected. The result of testing with NIES 10C showed that Na and Zn elements are met from acceptance criteria of accuracy and precision, but Mn element is rejected. The result of selectivity test showed that the value of quantity is between 0.1-2.5 μg, depend on the elements. (author)

Mixed methods in psychotherapy research: A review of method(ology) integration in psychotherapy science.

Science.gov (United States)

Bartholomew, Theodore T; Lockard, Allison J

2018-06-13

Mixed methods can foster depth and breadth in psychological research. However, its use remains in development in psychotherapy research. Our purpose was to review the use of mixed methods in psychotherapy research. Thirty-one studies were identified via the PRISMA systematic review method. Using Creswell & Plano Clark's typologies to identify design characteristics, we assessed each study for rigor and how each used mixed methods. Key features of mixed methods designs and these common patterns were identified: (a) integration of clients' perceptions via mixing; (b) understanding group psychotherapy; (c) integrating methods with cases and small samples; (d) analyzing clinical data as qualitative data; and (e) exploring cultural identities in psychotherapy through mixed methods. The review is discussed with respect to the value of integrating multiple data in single studies to enhance psychotherapy research. © 2018 Wiley Periodicals, Inc.

Engaging with mobile methods

DEFF Research Database (Denmark)

Jensen, Martin Trandberg

2014-01-01

This chapter showcases how mobile methods are more than calibrated techniques awaiting application by tourism researchers, but productive in the enactment of the mobile (Law and Urry, 2004). Drawing upon recent findings deriving from a PhD course on mobility and mobile methods it reveals...... the conceptual ambiguousness of the term ‘mobile methods’. In order to explore this ambiguousness the chapter provides a number of examples deriving from tourism research, to explore how mobile methods are always entangled in ideologies, predispositions, conventions and practice-realities. Accordingly......, the engagements with methods are acknowledged to be always political and contextual, reminding us to avoid essentialist discussions regarding research methods. Finally, the chapter draws on recent fieldwork to extend developments in mobilities-oriented tourism research, by employing auto-ethnography to call...

A method cache for Patmos

DEFF Research Database (Denmark)

Degasperi, Philipp; Hepp, Stefan; Puffitsch, Wolfgang

2014-01-01

For real-time systems we need time-predictable processors. This paper presents a method cache as a time-predictable solution for instruction caching. The method cache caches whole methods (or functions) and simplifies worst-case execution time analysis. We have integrated the method cache...... in the time-predictable processor Patmos. We evaluate the method cache with a large set of embedded benchmarks. Most benchmarks show a good hit rate for a method cache size in the range between 4 and 16 KB....

Attribute-Based Methods

Science.gov (United States)

Thomas P. Holmes; Wiktor L. Adamowicz

2003-01-01

Stated preference methods of environmental valuation have been used by economists for decades where behavioral data have limitations. The contingent valuation method (Chapter 5) is the oldest stated preference approach, and hundreds of contingent valuation studies have been conducted. More recently, and especially over the last decade, a class of stated preference...

Playing with the performer in Medieval music: Machaut’s ideas on love and order in Quant vraie Amour / O series summe rata / Super omnes speciosa (Motet 17)

NARCIS (Netherlands)

Boogaart, J.

2009-01-01

Machaut’s seventeenth motet might be one of his earliest works. Under its simple appearance it hides essential poetic reflections about the problematic relationship between paradoxical Love and the regular order of the universe, a problem which he kept pondering all his life. This problem is

Playing with the performer in Medieval music: Machaut’s ideas on love and order in Quant vraie Amour / O series summe rata / Super omnes speciosa (Motet 17)

OpenAIRE

Boogaart, J.

2009-01-01

Machaut’s seventeenth motet might be one of his earliest works. Under its simple appearance it hides essential poetic reflections about the problematic relationship between paradoxical Love and the regular order of the universe, a problem which he kept pondering all his life. This problem is expressed both by the texts and by the music. To bring his performers to an understanding of his thought, Machaut first misled them, in a clever play with the ambiguities of the notational system of his t...

Revisiting the Humanisation of International Law: Limits and Potential : Obligations Erga Omnes, Hierarchy of Rules and the Principle of Due Diligence as the Basis for Further Humanisation

NARCIS (Netherlands)

V.P. Tzevelekos (Vassilis)

2013-01-01

textabstractThe article critically evaluates the theory of the humanisation of international law. First, it argues that despite human rights having impact on (other areas of) international law, this trend has in the past been somewhat inflated. A number of examples are given where human rights have

Riigi rahvusvaheline vastutus erga omnes kohustuste rikkumisest Tðetðeenia relvakonflikti näitel : [bakalaureusetöö] / Martin Roger ; Tartu Ülikool, õigusteaduskond ; juhendaja: Kristi Land

Index Scriptorium Estoniae

Roger, Martin

2001-01-01

Riigi vastutuse üldisest iseloomust rahvusvahelises õiguses, teo omistatavus riigile, rahvusvahelise kohustuse rikkumine, Tshetsheenia konflikt kui siseriiklik relvastatud konflikt, Vene Föderatsiooni rahvusvahelise humanitaarõiguse rikkumised Tshetsheenia konfliktis, vastutuse rakendamine

Operator theory and numerical methods

CERN Document Server

Fujita, H; Suzuki, T

2001-01-01

In accordance with the developments in computation, theoretical studies on numerical schemes are now fruitful and highly needed. In 1991 an article on the finite element method applied to evolutionary problems was published. Following the method, basically this book studies various schemes from operator theoretical points of view. Many parts are devoted to the finite element method, but other schemes and problems (charge simulation method, domain decomposition method, nonlinear problems, and so forth) are also discussed, motivated by the observation that practically useful schemes have fine mathematical structures and the converses are also true. This book has the following chapters: 1. Boundary Value Problems and FEM. 2. Semigroup Theory and FEM. 3. Evolution Equations and FEM. 4. Other Methods in Time Discretization. 5. Other Methods in Space Discretization. 6. Nonlinear Problems. 7. Domain Decomposition Method.

Development of rupture process analysis method for great earthquakes using Direct Solution Method

Science.gov (United States)

Yoshimoto, M.; Yamanaka, Y.; Takeuchi, N.

2010-12-01

Conventional rupture process analysis methods using teleseismic body waves were based on ray theory. Therefore, these methods have the following problems in applying to great earthquakes such as 2004 Sumatra earthquake: (1) difficulty in computing all later phases such as the PP reflection phase, (2) impossibility of computing called “W phase”, the long period phase arriving before S wave, (3) implausibility of hypothesis that the distance is far enough from the observation points to the hypocenter compared to the fault length. To solve above mentioned problems, we have developed a new method which uses the synthetic seismograms computed by the Direct Solution Method (DSM, e.g. Kawai et al. 2006) as Green’s functions. We used the DSM software (http://www.eri.u-tokyo.ac.jp/takeuchi/software/) for computing the Green’s functions up to 1 Hz for the IASP91 (Kennett and Engdahl, 1991) model, and determined the final slip distributions using the waveform inversion method (Kikuchi et al. 2003). First we confirmed whether the Green’s functions computed by DSM were accurate in higher frequencies up to 1 Hz. Next we performed the rupture process analysis of this new method for Mw8.0 (GCMT) large Solomon Islands earthquake on April 1, 2007. We found that this earthquake consisted of two asperities and the rupture propagated across the subducting Sinbo ridge. The obtained slip distribution better correlates to the aftershock distributions than existing method. Furthermore, this new method keep same accuracy of existing method (which has the advantage of calculating) with respect to direct P-wave and reflection phases near the source, and also accurately calculate the later phases such a PP-wave.

Biostatistical methods [Methods in molecular biology, v. 184

National Research Council Canada - National Science Library

Looney, Steven W

2002-01-01

.... In the case of genetic effects in human populations, the authors describe sophisticated statistical methods to control the overall false-positive rate when many statistical tests are used in linking...

What is the method in applying formal methods to PLC applications?

NARCIS (Netherlands)

Mader, Angelika H.; Engel, S.; Wupper, Hanno; Kowalewski, S.; Zaytoon, J.

2000-01-01

The question we investigate is how to obtain PLC applications with confidence in their proper functioning. Especially, we are interested in the contribution that formal methods can provide for their development. Our maxim is that the place of a particular formal method in the total picture of system

On-chip graphene electrode, methods of making, and methods of use

KAUST Repository

Nayak, Pranati

2018-01-25

Embodiments of the present disclosure provide a device including an on-chip electrode platform including one or more three dimensional laser scribed graphene electrodes, methods of making the on-chip electrode platform, methods of analyzing (e.g., detecting, quantifying, and the like) chemicals and biochemicals, and the like.

Moment methods and Lanczos methods

International Nuclear Information System (INIS)

Whitehead, R.R.

1980-01-01

In contrast to many of the speakers at this conference I am less interested in average properties of nuclei than in detailed spectroscopy. I will try to show, however, that the two are very closely connected and that shell-model calculations may be used to give a great deal of information not normally associated with the shell-model. It has been demonstrated clearly to us that the level spacing fluctuations in nuclear spectra convey very little physical information. This is true when the fluctuations are averaged over the entire spectrum but not if one's interest is in the lowest few states, whose spacings are relatively large. If one wishes to calculate a ground state (say) accurately, that is with an error much smaller than the excitation energy of the first excited state, very high moments, μ/sub n/, n approx. 200, are needed. As I shall show, we use such moments as a matter of course, albeit without actually calculating them; in fact I will try to show that, if at all possible, the actual calculations of moments is to be avoided like the plague. At the heart of the new shell-model methods embodied in the Glasgow shell-model program and one or two similar ones is the so-called Lanczos method and this, it turns out, has many deep and subtle connections with the mathematical theory of moments. It is these connections that I will explore here

Triptycene-based dianhydrides, polyimides, methods of making each, and methods of use

KAUST Repository

Ghanem, Bader; Pinnau, Ingo; Swaidan, Raja

2015-01-01

A triptycene-based monomer, a method of making a triptycene-based monomer, a triptycene-based aromatic polyimide, a method of making a triptycene- based aromatic polyimide, methods of using triptycene-based aromatic polyimides, structures incorporating triptycene-based aromatic polyimides, and methods of gas separation are provided. Embodiments of the triptycene-based monomers and triptycene-based aromatic polyimides have high permeabilities and excellent selectivities. Embodiments of the triptycene-based aromatic polyimides have one or more of the following characteristics: intrinsic microporosity, good thermal stability, and enhanced solubility. In an exemplary embodiment, the triptycene-based aromatic polyimides are microporous and have a high BET surface area. In an exemplary embodiment, the triptycene-based aromatic polyimides can be used to form a gas separation membrane.

Triptycene-based dianhydrides, polyimides, methods of making each, and methods of use

KAUST Repository

Ghanem, Bader

2015-12-30

A triptycene-based monomer, a method of making a triptycene-based monomer, a triptycene-based aromatic polyimide, a method of making a triptycene- based aromatic polyimide, methods of using triptycene-based aromatic polyimides, structures incorporating triptycene-based aromatic polyimides, and methods of gas separation are provided. Embodiments of the triptycene-based monomers and triptycene-based aromatic polyimides have high permeabilities and excellent selectivities. Embodiments of the triptycene-based aromatic polyimides have one or more of the following characteristics: intrinsic microporosity, good thermal stability, and enhanced solubility. In an exemplary embodiment, the triptycene-based aromatic polyimides are microporous and have a high BET surface area. In an exemplary embodiment, the triptycene-based aromatic polyimides can be used to form a gas separation membrane.

Methods in ALFA Alignment

CERN Document Server

Melendez, Jordan

2014-01-01

This note presents two model-independent methods for use in the alignment of the ALFA forward detectors. Using a Monte Carlo simulated LHC run at \\beta = 90m and \\sqrt{s} = 7 TeV, the Kinematic Peak alignment method is utilized to reconstruct the Mandelstam momentum transfer variable t for single-diractive protons. The Hot Spot method uses fluctuations in the hitmap density to pinpoint particular regions in the detector that could signal a misalignment. Another method uses an error function fit to find the detector edge. With this information, the vertical alignment can be determined.

Toward cost-efficient sampling methods

Science.gov (United States)

Luo, Peng; Li, Yongli; Wu, Chong; Zhang, Guijie

2015-09-01

The sampling method has been paid much attention in the field of complex network in general and statistical physics in particular. This paper proposes two new sampling methods based on the idea that a small part of vertices with high node degree could possess the most structure information of a complex network. The two proposed sampling methods are efficient in sampling high degree nodes so that they would be useful even if the sampling rate is low, which means cost-efficient. The first new sampling method is developed on the basis of the widely used stratified random sampling (SRS) method and the second one improves the famous snowball sampling (SBS) method. In order to demonstrate the validity and accuracy of two new sampling methods, we compare them with the existing sampling methods in three commonly used simulation networks that are scale-free network, random network, small-world network, and also in two real networks. The experimental results illustrate that the two proposed sampling methods perform much better than the existing sampling methods in terms of achieving the true network structure characteristics reflected by clustering coefficient, Bonacich centrality and average path length, especially when the sampling rate is low.

Methods of forming semiconductor devices and devices formed using such methods

Science.gov (United States)

Fox, Robert V; Rodriguez, Rene G; Pak, Joshua

2013-05-21

Single source precursors are subjected to carbon dioxide to form particles of material. The carbon dioxide may be in a supercritical state. Single source precursors also may be subjected to supercritical fluids other than supercritical carbon dioxide to form particles of material. The methods may be used to form nanoparticles. In some embodiments, the methods are used to form chalcopyrite materials. Devices such as, for example, semiconductor devices may be fabricated that include such particles. Methods of forming semiconductor devices include subjecting single source precursors to carbon dioxide to form particles of semiconductor material, and establishing electrical contact between the particles and an electrode.

Advanced scientific computational methods and their applications to nuclear technologies. (4) Overview of scientific computational methods, introduction of continuum simulation methods and their applications (4)

International Nuclear Information System (INIS)

Sekimura, Naoto; Okita, Taira

2006-01-01

Scientific computational methods have advanced remarkably with the progress of nuclear development. They have played the role of weft connecting each realm of nuclear engineering and then an introductory course of advanced scientific computational methods and their applications to nuclear technologies were prepared in serial form. This is the fourth issue showing the overview of scientific computational methods with the introduction of continuum simulation methods and their applications. Simulation methods on physical radiation effects on materials are reviewed based on the process such as binary collision approximation, molecular dynamics, kinematic Monte Carlo method, reaction rate method and dislocation dynamics. (T. Tanaka)

Methods in Modern Biophysics

CERN Document Server

Nölting, Bengt

2006-01-01

Incorporating recent dramatic advances, this textbook presents a fresh and timely introduction to modern biophysical methods. An array of new, faster and higher-power biophysical methods now enables scientists to examine the mysteries of life at a molecular level. This innovative text surveys and explains the ten key biophysical methods, including those related to biophysical nanotechnology, scanning probe microscopy, X-ray crystallography, ion mobility spectrometry, mass spectrometry, proteomics, and protein folding and structure. Incorporating much information previously unavailable in tutorial form, Nölting employs worked examples and 267 illustrations to fully detail the techniques and their underlying mechanisms. Methods in Modern Biophysics is written for advanced undergraduate and graduate students, postdocs, researchers, lecturers and professors in biophysics, biochemistry and related fields. Special features in the 2nd edition: • Illustrates the high-resolution methods for ultrashort-living protei...

Stated preference methods using R

CERN Document Server

Aizaki, Hideo; Sato, Kazuo

2014-01-01

Stated Preference Methods Using R explains how to use stated preference (SP) methods, which are a family of survey methods, to measure people's preferences based on decision making in hypothetical choice situations. Along with giving introductory explanations of the methods, the book collates information on existing R functions and packages as well as those prepared by the authors. It focuses on core SP methods, including contingent valuation (CV), discrete choice experiments (DCEs), and best-worst scaling (BWS). Several example data sets illustrate empirical applications of each method with R

Lectures on Monte Carlo methods

CERN Document Server

Madras, Neal

2001-01-01

Monte Carlo methods form an experimental branch of mathematics that employs simulations driven by random number generators. These methods are often used when others fail, since they are much less sensitive to the "curse of dimensionality", which plagues deterministic methods in problems with a large number of variables. Monte Carlo methods are used in many fields: mathematics, statistics, physics, chemistry, finance, computer science, and biology, for instance. This book is an introduction to Monte Carlo methods for anyone who would like to use these methods to study various kinds of mathemati

The Plastic Tension Field Method

DEFF Research Database (Denmark)

Hansen, Thomas

2005-01-01

This paper describes a calculation method for steel plate girders with transverse web stiffeners subjected to shear. It may be used for predicting the failure load or, as a design method, to determine the optimal amount of internal web stiffeners. The new method is called the plastic tension field...... method. The method is based on the theory of plasticity and is analogous to the so-called diagonal compression field method developed for reinforced concrete beams with transverse stirrups, which is adopted in the common European concrete code (Eurocode 2). Many other theories have been developed...

Prospective Mathematics Teachers' Opinions about Mathematical Modeling Method and Applicability of This Method

Science.gov (United States)

Akgün, Levent

2015-01-01

The aim of this study is to identify prospective secondary mathematics teachers' opinions about the mathematical modeling method and the applicability of this method in high schools. The case study design, which is among the qualitative research methods, was used in the study. The study was conducted with six prospective secondary mathematics…

Triptycene-based ladder monomers and polymers, methods of making each, and methods of use

KAUST Repository

Pinnau, Ingo

2015-02-05

Embodiments of the present disclosure provide for a triptycene-based A-B monomer, a method of making a triptycene-based A-B monomer, a triptycene-based ladder polymer, a method of making a triptycene-based ladder polymers, a method of using triptycene-based ladder polymers, a structure incorporating triptycene-based ladder polymers, a method of gas separation, and the like.

Continuation Newton methods

Czech Academy of Sciences Publication Activity Database

Axelsson, Owe; Sysala, Stanislav

2015-01-01

Roč. 70, č. 11 (2015), s. 2621-2637 ISSN 0898-1221 R&D Projects: GA ČR GA13-18652S Institutional support: RVO:68145535 Keywords : system of nonlinear equations * Newton method * load increment method * elastoplasticity Subject RIV: IN - Informatics, Computer Science Impact factor: 1.398, year: 2015 http://www.sciencedirect.com/science/article/pii/S0898122115003818

Detection method of internal leakage from valve using acoustic method

International Nuclear Information System (INIS)

Kumagai, Hiromichi; Kitajima, Akira; Suzuki, Akio.

1990-01-01

The objective of this study is to estimate the feasibility of the acoustic method for the internal leakage from the valves in power plants. From the experimental results, it was suggested that the acoustic method for the monitoring of leakage was feasible. When the background levels are higher than the acoustic signals from leakage, we can detect the leakage analyzing the spectrum of the remainders which take the background noise from the acoustic signals. (author)

A new ART iterative method and a comparison of performance among various ART methods

International Nuclear Information System (INIS)

Tan, Yufeng; Sato, Shunsuke

1993-01-01

Many algebraic reconstruction techniques (ART) image reconstruction algorithms, for instance, simultaneous iterative reconstruction technique (SIRT), the relaxation method and multiplicative ART (MART), have been proposed and their convergent properties have been studied. SIRT and the underrelaxed relaxation method converge to the least-squares solution, but the convergent speeds are very slow. The Kaczmarz method converges very quickly, but the reconstructed images contain a lot of noise. The comparative studies between these algorithms have been done by Gilbert and others, but are not adequate. In this paper, we (1) propose a new method which is a modified Kaczmarz method and prove its convergence property, (2) study performance of 7 algorithms including the one proposed here by computer simulation for 3 kinds of typical phantoms. The method proposed here does not give the least-square solution, but the root mean square errors of its reconstructed images decrease very quickly after few interations. The result shows that the method proposed here gives a better reconstructed image. (author)

Tramas tróficas de peces de arrecifes en la región noroccidental de Cuba. II. Grupos funcionales

Directory of Open Access Journals (Sweden)

Ivet Hernández

2008-09-01

Full Text Available Se elaboró un modelo conceptual de la trama alimentaria en una zona del sublitoral rocoso de Ciudad de la Habana, con énfasis en los peces desde octubre del 2004 hasta febrero del 2006. Para ello se emplearon los contenidos estomacales de las especies más abundantes y la información disponible en la literatura. Para describir las dietas de las especies de peces carnívoras y omnívoras se empleó el índice de importancia relativa. Para los herbívoros y consumidores de esponjas se usó una modificación del método de abundancia relativa. Se emplearon técnicas de análisis de clasificación numérica jerárquica aglomerativa para determinar el grado de similitud en las dietas de los peces. La matriz fue construida empleando el índice de disimilitud de Bray-Curtis. El análisis de la similitud de las dietas permitió la formación de 10 grupos tróficos funcionales. La escasez de depredadores tope de gran tamaño y la dominancia de muy pocas especies de bajo nivel trófico, evidencian el efecto cascada en la zona estudiada. La trama trófica del área se encuentra muy alterada, debido a que el papel regulador de la ictiofagia está muy disminuido.Trophic webs of reef fishes at Cuba’s NW area. II. Functional groups. A conceptual model of the food webs, mainly with fish, was built in a rocky shore of Havana City with data covering from October 2004 to February 2006. The stomach contents of the most abundant fish was complemented with the literature. We used the Relative Importance Index method to describe diets of carnivorous and omnivorous fish; and a modification of the Relative Abundance method for sponge eaters and herbivorous fish. Agglomerative numeric classification techniques were used to determine the diet’s similarity. The matrix was made using Bray-Curtis dissimilarity index. Ten functional trophic groups were formed on the basis of diet similarity. The cascade effect is evidenced in this area by the big top predator shortage

Winograd Method Versus Winograd Method With Electrocoagulation in the Treatment of Ingrown Toenails.

Science.gov (United States)

Acar, Erdinc

An important component of the Winograd surgical method for an ingrown toenail is total excision of the associated germinal matrix. However, this might not always be accomplished with the procedure. We hypothesized that the surgical results might be improved by adding electrocoagulation of the germinal matrix to the Winograd method. The objective of the present study was to compare the recurrence, satisfaction, and complication rates of the Winograd method with those of the Winograd method with electrocoagulation. We retrospectively evaluated the records of 102 patients with single Heifetz stage 2 or 3 ingrown toenails who had undergone surgery from January 2013 to October 2014 using 1 of these 2 methods. Of the 102 patients, 50 (49%) underwent the Winograd method and 52 (51%) underwent the Winograd method with electrocoagulation. The mean follow-up period of our patients was 12 (range 6 to 22) months. An ingrown toenail recurred in 3 patients (6%) in the Winograd group and in no patient in the Winograd with electrocoagulation group (p = .04). Among the patients in the Winograd group, 46 (92.0%) were satisfied or very satisfied. Among the patients in the Winograd plus electrocoagulation group, 49 (94.2%) were satisfied or very satisfied (p = .04). No complications developed in either group. In conclusion, the Winograd method for ingrown toenails results in high satisfaction rates, low recurrence rates, and low complication rates. The addition of electrocoagulation of the germinal matrix to the Winograd method could result in even lower recurrence rates, while maintaining high patient satisfaction and without increasing the risk of complications. Copyright © 2017 American College of Foot and Ankle Surgeons. Published by Elsevier Inc. All rights reserved.

Impact of Uniform Methods on Interlaboratory Antibody Titration Variability: Antibody Titration and Uniform Methods.

Science.gov (United States)

Bachegowda, Lohith S; Cheng, Yan H; Long, Thomas; Shaz, Beth H

2017-01-01

-Substantial variability between different antibody titration methods prompted development and introduction of uniform methods in 2008. -To determine whether uniform methods consistently decrease interlaboratory variation in proficiency testing. -Proficiency testing data for antibody titration between 2009 and 2013 were obtained from the College of American Pathologists. Each laboratory was supplied plasma and red cells to determine anti-A and anti-D antibody titers by their standard method: gel or tube by uniform or other methods at different testing phases (immediate spin and/or room temperature [anti-A], and/or anti-human globulin [AHG: anti-A and anti-D]) with different additives. Interlaboratory variations were compared by analyzing the distribution of titer results by method and phase. -A median of 574 and 1100 responses were reported for anti-A and anti-D antibody titers, respectively, during a 5-year period. The 3 most frequent (median) methods performed for anti-A antibody were uniform tube room temperature (147.5; range, 119-159), uniform tube AHG (143.5; range, 134-150), and other tube AHG (97; range, 82-116); for anti-D antibody, the methods were other tube (451; range, 431-465), uniform tube (404; range, 382-462), and uniform gel (137; range, 121-153). Of the larger reported methods, uniform gel AHG phase for anti-A and anti-D antibodies had the most participants with the same result (mode). For anti-A antibody, 0 of 8 (uniform versus other tube room temperature) and 1 of 8 (uniform versus other tube AHG), and for anti-D antibody, 0 of 8 (uniform versus other tube) and 0 of 8 (uniform versus other gel) proficiency tests showed significant titer variability reduction. -Uniform methods harmonize laboratory techniques but rarely reduce interlaboratory titer variance in comparison with other methods.

CASE METHOD: THE STORY OF THE DEVELOPMENT AND USE OF THE METHOD IN EDUCATION

Directory of Open Access Journals (Sweden)

Светлана Юрьевна Грузкова

2013-08-01

Full Text Available This article deals with the history of origin and issue of case-study method (of a кейс-method in the practice of professional education, which is based on case studies. The distinctive feature of the case-study method is to create a problematic situation on the basis of the facts of real life. As a method, analysis of situations-has become widespread in the world in the 70-80 years, in the same period, he became known in the USSR. This method was used at the beginning, when training managers mainly economic universities to form the students ' ability to make decisions. It is connected with the changes taking place in the economy, because at that time, it has generated substantial reform demand for specialists who know how to act in situations of uncertainty, high risk specialists who can analyze and make decisions. On the one hand, as the authors note, the wide dissemination of this method in education due to its orientation, so that the case method is focused not so much on the development of specific knowledge or skills, as on the development of the common intellectual and communicative capacity of the trainee and the training. In addition, the case method is quite effective in training, he can be connected easily enough with other learning methods. On the other hand, have been certain difficulties in introducing the case-study method in the practice of professional education: general orientation for the development of education and development of the quality requirements for surface treatment, specialist teachers to the methodological basis for the other method.DOI: http://dx.doi.org/10.12731/2218-7405-2013-6-24

A Quantitative Method for Localizing User Interface Problems: The D-TEO Method

Directory of Open Access Journals (Sweden)

Juha Lamminen

2009-01-01

Full Text Available A large array of evaluation methods have been proposed to identify Website usability problems. In log-based evaluation, information about the performance of users is collected and stored into log files, and used to find problems and deficiencies in Web page designs. Most methods require the programming and modeling of large task models, which are cumbersome processes for evaluators. Also, because much statistical data is collected onto log files, recognizing which Web pages require deeper usability analysis is difficult. This paper suggests a novel quantitative method, called the D-TEO, for locating problematic Web pages. This semiautomated method explores the decomposition of interaction tasks of directed information search into elementary operations, deploying two quantitative usability criteria, search success and search time, to reveal how a user navigates within a web of hypertext.

40 years of formal methods

DEFF Research Database (Denmark)

Bjørner, Dines; Havelund, Klaus

2014-01-01

In this "40 years of formal methods" essay we shall first delineate, Sect. 1, what we mean by method, formal method, computer science, computing science, software engineering, and model-oriented and algebraic methods. Based on this, we shall characterize a spectrum from specification-oriented met...

The surface analysis methods

International Nuclear Information System (INIS)

Deville, J.P.

1998-01-01

Nowadays, there are a lot of surfaces analysis methods, each having its specificity, its qualities, its constraints (for instance vacuum) and its limits. Expensive in time and in investment, these methods have to be used deliberately. This article appeals to non specialists. It gives some elements of choice according to the studied information, the sensitivity, the use constraints or the answer to a precise question. After having recalled the fundamental principles which govern these analysis methods, based on the interaction between radiations (ultraviolet, X) or particles (ions, electrons) with matter, two methods will be more particularly described: the Auger electron spectroscopy (AES) and x-rays photoemission spectroscopy (ESCA or XPS). Indeed, they are the most widespread methods in laboratories, the easier for use and probably the most productive for the analysis of surface of industrial materials or samples submitted to treatments in aggressive media. (O.M.)

[Methods of quantitative proteomics].

Science.gov (United States)

Kopylov, A T; Zgoda, V G

2007-01-01

In modern science proteomic analysis is inseparable from other fields of systemic biology. Possessing huge resources quantitative proteomics operates colossal information on molecular mechanisms of life. Advances in proteomics help researchers to solve complex problems of cell signaling, posttranslational modification, structure and functional homology of proteins, molecular diagnostics etc. More than 40 various methods have been developed in proteomics for quantitative analysis of proteins. Although each method is unique and has certain advantages and disadvantages all these use various isotope labels (tags). In this review we will consider the most popular and effective methods employing both chemical modifications of proteins and also metabolic and enzymatic methods of isotope labeling.

Evaluation of Kjeldahl digestion method

International Nuclear Information System (INIS)

Amin, M.; Flowers, T.H.

2004-01-01

The evaluation of the Kjeldahl digestion method was investigated by comparing measured values of total nitrogen, phosphorus and potassium using three salt and catalyst mixture in Standard Kjeldahl digestion method and Salicyclic acid Modification method with certified values of plant material as well as comparison was made for determination of total nitrogen from steam distillation method verses the Technicon Auto-analyzer, and phosphorus Ascorbic acid/Molybdate method verses Molybdate/ Metavanadate method on the Technicon Auto-Analyzer. The 1 g salt/catalyst mixture recovered less nitrogen than the 2.5 g in the standard Kjeldahl method due to the lower temperature and incomplete digestion in both plant and soil samples. The 2.5 g catalyst mixture partially recovered nitrate in the standard Kjeldahl method and the salicylic acid modification fail to recover all over nitrate in plant material. Use of 2.5 g salt catalyst mixture and selenium appears to promote nitrogen losses in salicylic acid modification method but not in the standard Kjeldahl method of digestion for soil samples. No interference of selenium or copper was observed in Nitrogen and Phosphorus on calorimetric determination. The standard Kjeldahl method with 2.5 g of salt/catalyst mixture of sodium sulphate copper sulphate (10:1) in 5 ml sulfuric acid were found suitable for determination of total Nitrogen, phosphorus and potassium. The steam distillation and the Technicon Auto-Analyzer technique measure similar amounts of ammonium nitrogen. However, the Technicon Auto analyzer technique is easier, rapid, higher degree of reproducibility, precise, accurate, reliable and free from human error. The amount of phosphorus measured by the Ascorbic acid/Molybdate method was more accurate than by the Molybdate/Metavanadate method on Technicon Auto-Analyzer. (author)

Overview of multifluid-flow-calculation methods

International Nuclear Information System (INIS)

Stewart, H.B.

1981-01-01

Two categories of numerical methods which may be useful in multiphase flow research are discussed. The first category includes methods which are specifically intended for accurate computation of discontinuities, such as the method of characteristics, particle-in-cell method, flux-corrected transport, and random choice methods. Methods in this category could be applied to research on rocket exhaust plumes and interior ballistics. The second category includes methods for smooth, subsonic flows, such as fractional step methods, semi-implicit method, and methods which treat convection implicitly. The subsonic flow methods could be of interest for ice flows

Maximum Quantum Entropy Method

OpenAIRE

Sim, Jae-Hoon; Han, Myung Joon

2018-01-01

Maximum entropy method for analytic continuation is extended by introducing quantum relative entropy. This new method is formulated in terms of matrix-valued functions and therefore invariant under arbitrary unitary transformation of input matrix. As a result, the continuation of off-diagonal elements becomes straightforward. Without introducing any further ambiguity, the Bayesian probabilistic interpretation is maintained just as in the conventional maximum entropy method. The applications o...

The multigrid preconditioned conjugate gradient method

Science.gov (United States)

Tatebe, Osamu

1993-01-01

A multigrid preconditioned conjugate gradient method (MGCG method), which uses the multigrid method as a preconditioner of the PCG method, is proposed. The multigrid method has inherent high parallelism and improves convergence of long wavelength components, which is important in iterative methods. By using this method as a preconditioner of the PCG method, an efficient method with high parallelism and fast convergence is obtained. First, it is considered a necessary condition of the multigrid preconditioner in order to satisfy requirements of a preconditioner of the PCG method. Next numerical experiments show a behavior of the MGCG method and that the MGCG method is superior to both the ICCG method and the multigrid method in point of fast convergence and high parallelism. This fast convergence is understood in terms of the eigenvalue analysis of the preconditioned matrix. From this observation of the multigrid preconditioner, it is realized that the MGCG method converges in very few iterations and the multigrid preconditioner is a desirable preconditioner of the conjugate gradient method.

Methods of refining natural oils, and methods of producing fuel compositions

Science.gov (United States)

Firth, Bruce E.; Kirk, Sharon E.

2015-10-27

A method of refining a natural oil includes: (a) providing a feedstock that includes a natural oil; (b) reacting the feedstock in the presence of a metathesis catalyst to form a metathesized product that includes olefins and esters; (c) passivating residual metathesis catalyst with an agent that comprises nitric acid; (d) separating the olefins in the metathesized product from the esters in the metathesized product; and (e) transesterifying the esters in the presence of an alcohol to form a transesterified product and/or hydrogenating the olefins to form a fully or partially saturated hydrogenated product. Methods for suppressing isomerization of olefin metathesis products produced in a metathesis reaction, and methods of producing fuel compositions are described.

Groundwater Seepage Estimation into Amirkabir Tunnel Using Analytical Methods and DEM and SGR Method

OpenAIRE

Hadi Farhadian; Homayoon Katibeh

2015-01-01

In this paper, groundwater seepage into Amirkabir tunnel has been estimated using analytical and numerical methods for 14 different sections of the tunnel. Site Groundwater Rating (SGR) method also has been performed for qualitative and quantitative classification of the tunnel sections. The obtained results of above mentioned methods were compared together. The study shows reasonable accordance with results of the all methods unless for two sections of tunnel. In these t...

Efficient searching in meshfree methods

Science.gov (United States)

Olliff, James; Alford, Brad; Simkins, Daniel C.

2018-04-01

Meshfree methods such as the Reproducing Kernel Particle Method and the Element Free Galerkin method have proven to be excellent choices for problems involving complex geometry, evolving topology, and large deformation, owing to their ability to model the problem domain without the constraints imposed on the Finite Element Method (FEM) meshes. However, meshfree methods have an added computational cost over FEM that come from at least two sources: increased cost of shape function evaluation and the determination of adjacency or connectivity. The focus of this paper is to formally address the types of adjacency information that arises in various uses of meshfree methods; a discussion of available techniques for computing the various adjacency graphs; propose a new search algorithm and data structure; and finally compare the memory and run time performance of the methods.

Methods in aquatic bacteriology

National Research Council Canada - National Science Library

Austin, B

1988-01-01

.... Within these sections detailed chapters consider sampling methods, determination of biomass, isolation methods, identification, the bacterial microflora of fish, invertebrates, plants and the deep...

Determination method of radiostrontium

International Nuclear Information System (INIS)

1984-01-01

This manual provides determination methods of strontium-90 and strontium-89 in the environment released from nuclear facilities, and it is a revised edition of the previous manual published in 1974. As for the preparation method of radiation counting sample, ion exchange method, oxalate separation method and solvent extraction method were adopted in addition to the method of fuming nitric acid separation adopted in the previous edition. Strontium-90 is determined by the separation and radioactivity determination of yttrium-90 in radioequilibrium with strontium-90. Strontium-89 is determined by subtraction of radioactivity of strontium-90 plus yttrium-90 from gross radioactivity of isolated strontium carbonate. Radioactivity determination should be carried out with a low-background 2 π-gas-flow counting system for the mounted sample on a filter having a chemical form of ferric hydroxide, yttrium oxalate or strontium carbonate. This manual describes sample preparation procedures as well as radioactivity counting procedures for environmental samples of precipitates as rain or snow, airborne dust, fresh water, sea water and soil, and also for ash sample made from biological or food samples such as grains, vegetables, tea leaves, pine needle, milk, marine organisms, and total diet, by employing a method of fuming nitric acid separation, ion exchange separation, oxalate precipitate separation or solvent extraction separation (only for an ash sample). Procedures for reagent chemicals preparation is also attached to this manual. (Takagi, S.)

Basics of Bayesian methods.

Science.gov (United States)

Ghosh, Sujit K

2010-01-01

Bayesian methods are rapidly becoming popular tools for making statistical inference in various fields of science including biology, engineering, finance, and genetics. One of the key aspects of Bayesian inferential method is its logical foundation that provides a coherent framework to utilize not only empirical but also scientific information available to a researcher. Prior knowledge arising from scientific background, expert judgment, or previously collected data is used to build a prior distribution which is then combined with current data via the likelihood function to characterize the current state of knowledge using the so-called posterior distribution. Bayesian methods allow the use of models of complex physical phenomena that were previously too difficult to estimate (e.g., using asymptotic approximations). Bayesian methods offer a means of more fully understanding issues that are central to many practical problems by allowing researchers to build integrated models based on hierarchical conditional distributions that can be estimated even with limited amounts of data. Furthermore, advances in numerical integration methods, particularly those based on Monte Carlo methods, have made it possible to compute the optimal Bayes estimators. However, there is a reasonably wide gap between the background of the empirically trained scientists and the full weight of Bayesian statistical inference. Hence, one of the goals of this chapter is to bridge the gap by offering elementary to advanced concepts that emphasize linkages between standard approaches and full probability modeling via Bayesian methods.

Methods for magnetostatic field calculation

International Nuclear Information System (INIS)

Vorozhtsov, S.B.

1984-01-01

Two methods for magnetostatic field calculation: differential and integrat are considered. Both approaches are shown to have certain merits and drawbacks, choice of the method depend on the type of the solved problem. An opportunity of combination of these tWo methods in one algorithm (hybrid method) is considered

77 FR 48733 - Transitional Program for Covered Business Method Patents-Definitions of Covered Business Method...

Science.gov (United States)

2012-08-14

... Office 37 CFR Part 42 Transitional Program for Covered Business Method Patents--Definitions of Covered... Business Method Patents-- Definitions of Covered Business Method Patent and Technological Invention AGENCY... forth in detail the definitions of the terms ``covered business method patent'' and ``technological...

Explorative methods in linear models

DEFF Research Database (Denmark)

Høskuldsson, Agnar

2004-01-01

The author has developed the H-method of mathematical modeling that builds up the model by parts, where each part is optimized with respect to prediction. Besides providing with better predictions than traditional methods, these methods provide with graphic procedures for analyzing different feat...... features in data. These graphic methods extend the well-known methods and results of Principal Component Analysis to any linear model. Here the graphic procedures are applied to linear regression and Ridge Regression....

Analysis of a discrete element method and coupling with a compressible fluid flow method

International Nuclear Information System (INIS)

Monasse, L.

2011-01-01

This work aims at the numerical simulation of compressible fluid/deformable structure interactions. In particular, we have developed a partitioned coupling algorithm between a Finite Volume method for the compressible fluid and a Discrete Element method capable of taking into account fractures in the solid. A survey of existing fictitious domain methods and partitioned algorithms has led to choose an Embedded Boundary method and an explicit coupling scheme. We first showed that the Discrete Element method used for the solid yielded the correct macroscopic behaviour and that the symplectic time-integration scheme ensured the preservation of energy. We then developed an explicit coupling algorithm between a compressible inviscid fluid and an un-deformable solid. Mass, momentum and energy conservation and consistency properties were proved for the coupling scheme. The algorithm was then extended to the coupling with a deformable solid, in the form of a semi implicit scheme. Finally, we applied this method to unsteady inviscid flows around moving structures: comparisons with existing numerical and experimental results demonstrate the excellent accuracy of our method. (author) [fr

Adaptive method of lines

CERN Document Server

Saucez, Ph

2001-01-01

The general Method of Lines (MOL) procedure provides a flexible format for the solution of all the major classes of partial differential equations (PDEs) and is particularly well suited to evolutionary, nonlinear wave PDEs. Despite its utility, however, there are relatively few texts that explore it at a more advanced level and reflect the method''s current state of development.Written by distinguished researchers in the field, Adaptive Method of Lines reflects the diversity of techniques and applications related to the MOL. Most of its chapters focus on a particular application but also provide a discussion of underlying philosophy and technique. Particular attention is paid to the concept of both temporal and spatial adaptivity in solving time-dependent PDEs. Many important ideas and methods are introduced, including moving grids and grid refinement, static and dynamic gridding, the equidistribution principle and the concept of a monitor function, the minimization of a functional, and the moving finite elem...

Essential numerical computer methods

CERN Document Server

Johnson, Michael L

2010-01-01

The use of computers and computational methods has become ubiquitous in biological and biomedical research. During the last 2 decades most basic algorithms have not changed, but what has is the huge increase in computer speed and ease of use, along with the corresponding orders of magnitude decrease in cost. A general perception exists that the only applications of computers and computer methods in biological and biomedical research are either basic statistical analysis or the searching of DNA sequence data bases. While these are important applications they only scratch the surface of the current and potential applications of computers and computer methods in biomedical research. The various chapters within this volume include a wide variety of applications that extend far beyond this limited perception. As part of the Reliable Lab Solutions series, Essential Numerical Computer Methods brings together chapters from volumes 210, 240, 321, 383, 384, 454, and 467 of Methods in Enzymology. These chapters provide ...

The lod score method.

Science.gov (United States)

Rice, J P; Saccone, N L; Corbett, J

2001-01-01

The lod score method originated in a seminal article by Newton Morton in 1955. The method is broadly concerned with issues of power and the posterior probability of linkage, ensuring that a reported linkage has a high probability of being a true linkage. In addition, the method is sequential, so that pedigrees or lod curves may be combined from published reports to pool data for analysis. This approach has been remarkably successful for 50 years in identifying disease genes for Mendelian disorders. After discussing these issues, we consider the situation for complex disorders, where the maximum lod score (MLS) statistic shares some of the advantages of the traditional lod score approach but is limited by unknown power and the lack of sharing of the primary data needed to optimally combine analytic results. We may still learn from the lod score method as we explore new methods in molecular biology and genetic analysis to utilize the complete human DNA sequence and the cataloging of all human genes.

Semi-supervised clustering methods.

Science.gov (United States)

Bair, Eric

2013-01-01

Cluster analysis methods seek to partition a data set into homogeneous subgroups. It is useful in a wide variety of applications, including document processing and modern genetics. Conventional clustering methods are unsupervised, meaning that there is no outcome variable nor is anything known about the relationship between the observations in the data set. In many situations, however, information about the clusters is available in addition to the values of the features. For example, the cluster labels of some observations may be known, or certain observations may be known to belong to the same cluster. In other cases, one may wish to identify clusters that are associated with a particular outcome variable. This review describes several clustering algorithms (known as "semi-supervised clustering" methods) that can be applied in these situations. The majority of these methods are modifications of the popular k-means clustering method, and several of them will be described in detail. A brief description of some other semi-supervised clustering algorithms is also provided.

Bayesian Monte Carlo method

International Nuclear Information System (INIS)

Rajabalinejad, M.

2010-01-01

To reduce cost of Monte Carlo (MC) simulations for time-consuming processes, Bayesian Monte Carlo (BMC) is introduced in this paper. The BMC method reduces number of realizations in MC according to the desired accuracy level. BMC also provides a possibility of considering more priors. In other words, different priors can be integrated into one model by using BMC to further reduce cost of simulations. This study suggests speeding up the simulation process by considering the logical dependence of neighboring points as prior information. This information is used in the BMC method to produce a predictive tool through the simulation process. The general methodology and algorithm of BMC method are presented in this paper. The BMC method is applied to the simplified break water model as well as the finite element model of 17th Street Canal in New Orleans, and the results are compared with the MC and Dynamic Bounds methods.

Analytical Method and Semianalytical Method for Analysis of Scattering by Anisotropic Sphere: A Review

Directory of Open Access Journals (Sweden)

Chao Wan

2012-01-01

Full Text Available The history of methods for the electromagnetic scattering by an anisotropic sphere has been reviewed. Two main methods, angular expansion method and T-matrix method, which are widely used for the anisotropic sphere, are expressed in Cartesian coordinate firstly. The comparison of those and the further exploration on the scattering field are illustrated afterwards. Based on the most general form concluded by variable separation method, the coupled electric field and magnetic field of radial anisotropic sphere can be derived. By simplifying the condition, simpler case of uniaxial anisotropic media is expressed with confirmed coefficients for the internal and external field. Details of significant phenomenon are presented.

Interlaboratory Validation of the Leaching Environmental Assessment Framework (LEAF) Method 1313 and Method 1316

Science.gov (United States)

This document summarizes the results of an interlaboratory study conducted to generate precision estimates for two parallel batch leaching methods which are part of the Leaching Environmental Assessment Framework (LEAF). These methods are: (1) Method 1313: Liquid-Solid Partition...

From the Index Numers’ Method to the Method Of Coefficient Of Elasticity

Directory of Open Access Journals (Sweden)

Gheorghe Săvoiu

2013-08-01

Full Text Available Using the simple method of index numbers, and synthesizing the originality of his excellent statistical thinking by definition, this article identifies and presents an inimitable shortcut from Index – Numbers’ method to elasticity method. A final remark underlines the beauty and the rigour of this scientific demarche specific for the statistical thinking. This paper is a real homage addressed to Professor M. C. Demetrescu, and to his remarkable PhD thesis, printed approximately half a century ago, one of the best statistic and economic book about population demand.

Formal methods applied to industrial complex systems implementation of the B method

CERN Document Server

Boulanger, Jean-Louis

2014-01-01

This book presents real-world examples of formal techniques in an industrial context. It covers formal methods such as SCADE and/or the B Method, in various fields such as railways, aeronautics, and the automotive industry. The purpose of this book is to present a summary of experience on the use of "formal methods" (based on formal techniques such as proof, abstract interpretation and model-checking) in industrial examples of complex systems, based on the experience of people currently involved in the creation and assessment of safety critical system software. The involvement of people from

Comprehensive Evaluation of the Sustainable Development of Power Grid Enterprises Based on the Model of Fuzzy Group Ideal Point Method and Combination Weighting Method with Improved Group Order Relation Method and Entropy Weight Method

Directory of Open Access Journals (Sweden)

Shuyu Dai

2017-10-01

Full Text Available As an important implementing body of the national energy strategy, grid enterprises bear the important responsibility of optimizing the allocation of energy resources and serving the economic and social development, and their levels of sustainable development have a direct impact on the national economy and social life. In this paper, the model of fuzzy group ideal point method and combination weighting method with improved group order relation method and entropy weight method is proposed to evaluate the sustainable development of power grid enterprises. Firstly, on the basis of consulting a large amount of literature, the important criteria of the comprehensive evaluation of the sustainable development of power grid enterprises are preliminarily selected. The opinions of the industry experts are consulted and fed back for many rounds through the Delphi method and the evaluation criteria system for sustainable development of power grid enterprises is determined, then doing the consistent and non dimensional processing of the evaluation criteria. After that, based on the basic order relation method, the weights of each expert judgment matrix are synthesized to construct the compound matter elements. By using matter element analysis, the subjective weights of the criteria are obtained. And entropy weight method is used to determine the objective weights of the preprocessed criteria. Then, combining the subjective and objective information with the combination weighting method based on the subjective and objective weighted attribute value consistency, a more comprehensive, reasonable and accurate combination weight is calculated. Finally, based on the traditional TOPSIS method, the triangular fuzzy numbers are introduced to better realize the scientific processing of the data information which is difficult to quantify, and the queuing indication value of each object and the ranking result are obtained. A numerical example is taken to prove that the

Methods of neutron spectrometry

International Nuclear Information System (INIS)

Doerschel, B.

1981-01-01

The different methods of neutron spectrometry are based on the direct measurement of neutron velocity or on the use of suitable energy-dependent interaction processes. In the latter case the measuring effect of a detector is connected with the searched neutron spectrum by an integral equation. The solution needs suitable unfolding procedures. The most important methods of neutron spectrometry are the time-of-flight method, the crystal spectrometry, the neutron spectrometry by use of elastic collisions with hydrogen nuclei, and neutron spectrometry with the aid of nuclear reactions, especially of the neutron-induced activation. The advantages and disadvantages of these methods are contrasted considering the resolution, the measurable energy range, the sensitivity, and the experimental and computational efforts. (author)

Towards Cost-efficient Sampling Methods

OpenAIRE

Peng, Luo; Yongli, Li; Chong, Wu

2014-01-01

The sampling method has been paid much attention in the field of complex network in general and statistical physics in particular. This paper presents two new sampling methods based on the perspective that a small part of vertices with high node degree can possess the most structure information of a network. The two proposed sampling methods are efficient in sampling the nodes with high degree. The first new sampling method is improved on the basis of the stratified random sampling method and...

Triptycene-based ladder monomers and polymers, methods of making each, and methods of use

KAUST Repository

Pinnau, Ingo; Ghanem, Bader; Swaidan, Raja

2015-01-01

Embodiments of the present disclosure provide for a triptycene-based A-B monomer, a method of making a triptycene-based A-B monomer, a triptycene-based ladder polymer, a method of making a triptycene-based ladder polymers, a method of using

Chromatographic methods

International Nuclear Information System (INIS)

Marhol, M.; Stary, J.

1975-01-01

The characteristics are given of chromatographic separation and the methods are listed. Methods and data on materials used in partition, adsorption, precipitation and ion exchange chromatography are listed and conditions are described under which ion partition takes place. Special attention is devoted to ion exchange chromatography where tables are given to show the course of values of the partition coefficients of different ions in dependence on the concentration of agents and the course of equilibrium sorptions on different materials in dependence on the solution pH. A theoretical analysis is given and the properties of the most widely used ion exchangers are listed. Experimental conditions and apparatus used for each type of chromatography are listed. (L.K.)

[Comparison of the quick Gram stain method to the B&M modified and favor methods].

Science.gov (United States)

Osawa, Kayo; Kataoka, Nobumasa; Maruo, Toshio

2011-01-01

The Gram stain is an established method for bacterial identification, but the time needed to carry out this stain is 2-3 min. We attempted to shorten this time and stained a total of 70 clinical specimens isolated from using the Bartholomew & Mittwer (B&M) modified or Favor methods with a 3 s duration for washing and staining steps. Results were plotted and analyzed using a Hue Saturation Intensity (HSI) model. The range based on a plot of the two methods with the HSI model was presented as a reference interval. Our results indicated that 100% (35/35) of strains were Gram positive and 97.1% (34/35) were Gram negative for the quick B&M modified method. In the quick Favor method, 80.0% (28/35) were Gram positive and 68.6% (24/35) of strains were Gram negative. We propose that the quick B&M modified method is equivalent to the standard Gram staining method and is superior to the quick Favor method.

Comparison of PCR method with the culture method for identification of gonococci from endocervical swabs

Directory of Open Access Journals (Sweden)

Alam A

2002-01-01

Full Text Available Gonococcal infection remains still a major cause of morbidity among sexually active individuals. Diagnosis of the infection in a female case is more difficult than that in a male. This was a prospective study among 269 female commercial sex workers (CSWs to screen them for gonococcal infection, comparing the rapid method of identification of gonococci by polymerase chain reaction (PCR with the selective culture method. A total of 92 (34.2% CSWs were identified positive for Neisseria gonorrhoeae by combination of the two methods. The PCR method identified 87 of the specimens to harbour cppB gene of N. gonorrhoeae, whereas culture method identified 83 specimens showing colonies of gonococci. Taking into consideration of the total positive cases (92, the PCR method showed a sensitivity of 94.57%, whereas sensitivity of culture method was 90.22%. The selective culture method appears to be the most applicable in the identification of gonococci from clinical specimens, particularly in the less resourceful countries like Bangladesh.

The Source Equivalence Acceleration Method

International Nuclear Information System (INIS)

Everson, Matthew S.; Forget, Benoit

2015-01-01

Highlights: • We present a new acceleration method, the Source Equivalence Acceleration Method. • SEAM forms an equivalent coarse group problem for any spatial method. • Equivalence is also formed across different spatial methods and angular quadratures. • Testing is conducted using OpenMOC and performance is compared with CMFD. • Results show that SEAM is preferable for very expensive transport calculations. - Abstract: Fine-group whole-core reactor analysis remains one of the long sought goals of the reactor physics community. Such a detailed analysis is typically too computationally expensive to be realized on anything except the largest of supercomputers. Recondensation using the Discrete Generalized Multigroup (DGM) method, though, offers a relatively cheap alternative to solving the fine group transport problem. DGM, however, suffered from inconsistencies when applied to high-order spatial methods. While an exact spatial recondensation method was developed and provided full spatial consistency with the fine group problem, this approach substantially increased memory requirements for realistic problems. The method described in this paper, called the Source Equivalence Acceleration Method (SEAM), forms a coarse-group problem which preserves the fine-group problem even when using higher order spatial methods. SEAM allows recondensation to converge to the fine-group solution with minimal memory requirements and little additional overhead. This method also provides for consistency when using different spatial methods and angular quadratures between the coarse group and fine group problems. SEAM was implemented in OpenMOC, a 2D MOC code developed at MIT, and its performance tested against Coarse Mesh Finite Difference (CMFD) acceleration on the C5G7 benchmark problem and on a 361 group version of the problem. For extremely expensive transport calculations, SEAM was able to outperform CMFD, resulting in speed-ups of 20–45 relative to the normal power

Machine learning methods can replace 3D profile method in classification of amyloidogenic hexapeptides

Directory of Open Access Journals (Sweden)

Stanislawski Jerzy

2013-01-01

Full Text Available Abstract Background Amyloids are proteins capable of forming fibrils. Many of them underlie serious diseases, like Alzheimer disease. The number of amyloid-associated diseases is constantly increasing. Recent studies indicate that amyloidogenic properties can be associated with short segments of aminoacids, which transform the structure when exposed. A few hundreds of such peptides have been experimentally found. Experimental testing of all possible aminoacid combinations is currently not feasible. Instead, they can be predicted by computational methods. 3D profile is a physicochemical-based method that has generated the most numerous dataset - ZipperDB. However, it is computationally very demanding. Here, we show that dataset generation can be accelerated. Two methods to increase the classification efficiency of amyloidogenic candidates are presented and tested: simplified 3D profile generation and machine learning methods. Results We generated a new dataset of hexapeptides, using more economical 3D profile algorithm, which showed very good classification overlap with ZipperDB (93.5%. The new part of our dataset contains 1779 segments, with 204 classified as amyloidogenic. The dataset of 6-residue sequences with their binary classification, based on the energy of the segment, was applied for training machine learning methods. A separate set of sequences from ZipperDB was used as a test set. The most effective methods were Alternating Decision Tree and Multilayer Perceptron. Both methods obtained area under ROC curve of 0.96, accuracy 91%, true positive rate ca. 78%, and true negative rate 95%. A few other machine learning methods also achieved a good performance. The computational time was reduced from 18-20 CPU-hours (full 3D profile to 0.5 CPU-hours (simplified 3D profile to seconds (machine learning. Conclusions We showed that the simplified profile generation method does not introduce an error with regard to the original method, while

Machine learning methods can replace 3D profile method in classification of amyloidogenic hexapeptides.

Science.gov (United States)

Stanislawski, Jerzy; Kotulska, Malgorzata; Unold, Olgierd

2013-01-17

Amyloids are proteins capable of forming fibrils. Many of them underlie serious diseases, like Alzheimer disease. The number of amyloid-associated diseases is constantly increasing. Recent studies indicate that amyloidogenic properties can be associated with short segments of aminoacids, which transform the structure when exposed. A few hundreds of such peptides have been experimentally found. Experimental testing of all possible aminoacid combinations is currently not feasible. Instead, they can be predicted by computational methods. 3D profile is a physicochemical-based method that has generated the most numerous dataset - ZipperDB. However, it is computationally very demanding. Here, we show that dataset generation can be accelerated. Two methods to increase the classification efficiency of amyloidogenic candidates are presented and tested: simplified 3D profile generation and machine learning methods. We generated a new dataset of hexapeptides, using more economical 3D profile algorithm, which showed very good classification overlap with ZipperDB (93.5%). The new part of our dataset contains 1779 segments, with 204 classified as amyloidogenic. The dataset of 6-residue sequences with their binary classification, based on the energy of the segment, was applied for training machine learning methods. A separate set of sequences from ZipperDB was used as a test set. The most effective methods were Alternating Decision Tree and Multilayer Perceptron. Both methods obtained area under ROC curve of 0.96, accuracy 91%, true positive rate ca. 78%, and true negative rate 95%. A few other machine learning methods also achieved a good performance. The computational time was reduced from 18-20 CPU-hours (full 3D profile) to 0.5 CPU-hours (simplified 3D profile) to seconds (machine learning). We showed that the simplified profile generation method does not introduce an error with regard to the original method, while increasing the computational efficiency. Our new dataset

Scalable fast multipole methods for vortex element methods

KAUST Repository

Hu, Qi; Gumerov, Nail A.; Yokota, Rio; Barba, Lorena A.; Duraiswami, Ramani

2012-01-01

work for a scalar heterogeneous FMM algorithm, we develop a new FMM-based vortex method capable of simulating general flows including turbulence on heterogeneous architectures, which distributes the work between multi-core CPUs and GPUs to best utilize

Factorization method of quadratic template

Science.gov (United States)

Kotyrba, Martin

2017-07-01

Multiplication of two numbers is a one-way function in mathematics. Any attempt to distribute the outcome to its roots is called factorization. There are many methods such as Fermat's factorization, Dixońs method or quadratic sieve and GNFS, which use sophisticated techniques fast factorization. All the above methods use the same basic formula differing only in its use. This article discusses a newly designed factorization method. Effective implementation of this method in programs is not important, it only represents and clearly defines its properties.

Simulated annealing method for electronic circuits design: adaptation and comparison with other optimization methods

International Nuclear Information System (INIS)

Berthiau, G.

1995-10-01

The circuit design problem consists in determining acceptable parameter values (resistors, capacitors, transistors geometries ...) which allow the circuit to meet various user given operational criteria (DC consumption, AC bandwidth, transient times ...). This task is equivalent to a multidimensional and/or multi objective optimization problem: n-variables functions have to be minimized in an hyper-rectangular domain ; equality constraints can be eventually specified. A similar problem consists in fitting component models. In this way, the optimization variables are the model parameters and one aims at minimizing a cost function built on the error between the model response and the data measured on the component. The chosen optimization method for this kind of problem is the simulated annealing method. This method, provided by the combinatorial optimization domain, has been adapted and compared with other global optimization methods for the continuous variables problems. An efficient strategy of variables discretization and a set of complementary stopping criteria have been proposed. The different parameters of the method have been adjusted with analytical functions of which minima are known, classically used in the literature. Our simulated annealing algorithm has been coupled with an open electrical simulator SPICE-PAC of which the modular structure allows the chaining of simulations required by the circuit optimization process. We proposed, for high-dimensional problems, a partitioning technique which ensures proportionality between CPU-time and variables number. To compare our method with others, we have adapted three other methods coming from combinatorial optimization domain - the threshold method, a genetic algorithm and the Tabu search method - The tests have been performed on the same set of test functions and the results allow a first comparison between these methods applied to continuous optimization variables. Finally, our simulated annealing program

From the Kirsch-Kress potential method via the range test to the singular sources method

International Nuclear Information System (INIS)

Potthast, R; Schulz, J

2005-01-01

We review three reconstruction methods for inverse obstacle scattering problems. We will analyse the relation between the Kirsch-Kress potential method 1986, the range test of Kusiak, Potthast and Sylvester (2003) and the singular sources method of Potthast (2000). In particular, we show that the range test is a logical extension of the Kirsch-Kress method into the category of sampling methods employing the tool of domain sampling. Then we will show how a multi-wave version of the range test can be set up and we will work out its relation to the singular sources method. Numerical examples and demonstrations will be provided

Fitting methods to paradigms: are ergonomics methods fit for systems thinking?

Science.gov (United States)

Salmon, Paul M; Walker, Guy H; M Read, Gemma J; Goode, Natassia; Stanton, Neville A

2017-02-01

The issues being tackled within ergonomics problem spaces are shifting. Although existing paradigms appear relevant for modern day systems, it is worth questioning whether our methods are. This paper asks whether the complexities of systems thinking, a currently ubiquitous ergonomics paradigm, are outpacing the capabilities of our methodological toolkit. This is achieved through examining the contemporary ergonomics problem space and the extent to which ergonomics methods can meet the challenges posed. Specifically, five key areas within the ergonomics paradigm of systems thinking are focused on: normal performance as a cause of accidents, accident prediction, system migration, systems concepts and ergonomics in design. The methods available for pursuing each line of inquiry are discussed, along with their ability to respond to key requirements. In doing so, a series of new methodological requirements and capabilities are identified. It is argued that further methodological development is required to provide researchers and practitioners with appropriate tools to explore both contemporary and future problems. Practitioner Summary: Ergonomics methods are the cornerstone of our discipline. This paper examines whether our current methodological toolkit is fit for purpose given the changing nature of ergonomics problems. The findings provide key research and practice requirements for methodological development.

STOCHASTIC METHODS IN RISK ANALYSIS

Directory of Open Access Journals (Sweden)

Vladimíra OSADSKÁ

2017-06-01

Full Text Available In this paper, we review basic stochastic methods which can be used to extend state-of-the-art deterministic analytical methods for risk analysis. We can conclude that the standard deterministic analytical methods highly depend on the practical experience and knowledge of the evaluator and therefore, the stochastic methods should be introduced. The new risk analysis methods should consider the uncertainties in input values. We present how large is the impact on the results of the analysis solving practical example of FMECA with uncertainties modelled using Monte Carlo sampling.

Models and methods in thermoluminescence

International Nuclear Information System (INIS)

Furetta, C.

2005-01-01

This work contains a conference that was treated about the principles of the luminescence phenomena, the mathematical treatment concerning the thermoluminescent emission of light as well as the Randall-Wilkins model, the Garlick-Gibson model, the Adirovitch model, the May-Partridge model, the Braunlich-Scharman model, the mixed first and second order kinetics, the methods for evaluating the kinetics parameters such as the initial rise method, the various heating rates method, the isothermal decay method and those methods based on the analysis of the glow curve shape. (Author)

Soft tissue tumors - imaging methods

International Nuclear Information System (INIS)

Arlart, I.P.

1985-01-01

Soft Tissue Tumors - Imaging Methods: Imaging methods play an important diagnostic role in soft tissue tumors concerning a preoperative evaluation of localization, size, topographic relationship, dignity, and metastatic disease. The present paper gives an overview about diagnostic methods available today such as ultrasound, thermography, roentgenographic plain films and xeroradiography, radionuclide methods, computed tomography, lymphography, angiography, and magnetic resonance imaging. Besides sonography particularly computed tomography has the most important diagnostic value in soft tissue tumors. The application of a recently developed method, the magnetic resonance imaging, cannot yet be assessed in its significance. (orig.) [de

Models and methods in thermoluminescence

Energy Technology Data Exchange (ETDEWEB)

Furetta, C. [ICN, UNAM, A.P. 70-543, Mexico D.F. (Mexico)

2005-07-01

This work contains a conference that was treated about the principles of the luminescence phenomena, the mathematical treatment concerning the thermoluminescent emission of light as well as the Randall-Wilkins model, the Garlick-Gibson model, the Adirovitch model, the May-Partridge model, the Braunlich-Scharman model, the mixed first and second order kinetics, the methods for evaluating the kinetics parameters such as the initial rise method, the various heating rates method, the isothermal decay method and those methods based on the analysis of the glow curve shape. (Author)

Integration of gas chromatography mass spectrometry methods for differentiating ricin preparation methods.

Science.gov (United States)

Wunschel, David S; Melville, Angela M; Ehrhardt, Christopher J; Colburn, Heather A; Victry, Kristin D; Antolick, Kathryn C; Wahl, Jon H; Wahl, Karen L

2012-05-07

The investigation of crimes involving chemical or biological agents is infrequent, but presents unique analytical challenges. The protein toxin ricin is encountered more frequently than other agents and is found in the seeds of Ricinus communis, commonly known as the castor plant. Typically, the toxin is extracted from castor seeds utilizing a variety of different recipes that result in varying purity of the toxin. Moreover, these various purification steps can also leave or differentially remove a variety of exogenous and endogenous residual components with the toxin that may indicate the type and number of purification steps involved. We have applied three gas chromatography-mass spectrometry (GC-MS) based analytical methods to measure the variation in seed carbohydrates and castor oil ricinoleic acid, as well as the presence of solvents used for purification. These methods were applied to the same samples prepared using four previously identified toxin preparation methods, starting from four varieties of castor seeds. The individual data sets for seed carbohydrate profiles, ricinoleic acid, or acetone amount each provided information capable of differentiating different types of toxin preparations across seed types. However, the integration of the data sets using multivariate factor analysis provided a clear distinction of all samples based on the preparation method, independent of the seed source. In particular, the abundance of mannose, arabinose, fucose, ricinoleic acid, and acetone were shown to be important differentiating factors. These complementary tools provide a more confident determination of the method of toxin preparation than would be possible using a single analytical method.

A Numerical Method for Lane-Emden Equations Using Hybrid Functions and the Collocation Method

Directory of Open Access Journals (Sweden)

Changqing Yang

2012-01-01

Full Text Available A numerical method to solve Lane-Emden equations as singular initial value problems is presented in this work. This method is based on the replacement of unknown functions through a truncated series of hybrid of block-pulse functions and Chebyshev polynomials. The collocation method transforms the differential equation into a system of algebraic equations. It also has application in a wide area of differential equations. Corresponding numerical examples are presented to demonstrate the accuracy of the proposed method.

Method æ, the agile software development method tailored for the pharmaceutical industry.

NARCIS (Netherlands)

Hajou, A.; Batenburg, R.S.; Jansen, S.

2015-01-01

Agile software development methods have a high adoption rate due to their proven business benefits. Its success has not yet been identified in the pharmaceutical industry, due to the industry’s incompatibility with generic agile methods. Comprehensive research has been done to engineer a tailored

Reflexive Learning through Visual Methods

DEFF Research Database (Denmark)

Frølunde, Lisbeth

2014-01-01

What. This chapter concerns how visual methods and visual materials can support visually oriented, collaborative, and creative learning processes in education. The focus is on facilitation (guiding, teaching) with visual methods in learning processes that are designerly or involve design. Visual...... methods are exemplified through two university classroom cases about collaborative idea generation processes. The visual methods and materials in the cases are photo elicitation using photo cards, and modeling with LEGO Serious Play sets. Why. The goal is to encourage the reader, whether student...... or professional, to facilitate with visual methods in a critical, reflective, and experimental way. The chapter offers recommendations for facilitating with visual methods to support playful, emergent designerly processes. The chapter also has a critical, situated perspective. Where. This chapter offers case...

Method-Based Higher Education in Sustainability: The Potential of the Scenario Method

Directory of Open Access Journals (Sweden)

Richard Beecroft

2014-05-01

Full Text Available Both sustainability and education are challenging process-oriented objectives. When the aim is to combine both notions, as in Higher Education in Sustainability (HES, it is indispensable to first establish a common ground between them. In this paper, we characterise this common ground in terms of four aspects: future orientation, normativity, global perspective, and theory engaged in practice. Based on an analysis of the common ground, one method that is well-established in a wide range of sustainability sciences shows high potential for use in HES because it covers all four aspects in detail: the scenario method. We argue that a didactical reconstruction of the scenario method is necessary to utilise its potential and develop adequate forms of teaching in higher education. The scenario method is used to construct and analyse a set of alternative future developments to support decisions that have to be made in the present. Didactical reconstruction reveals a spectrum of objectives for which the scenario method can be employed: (1 projection; (2 teleological planning and (3 an explorative search for possibilities not yet considered. By studying and experimenting with this spectrum of objectives, students in HES can develop fundamental reflexive competencies in addressing the future in different ways that are relevant for both sustainability and education.

Semi-supervised clustering methods

Science.gov (United States)

Bair, Eric

2013-01-01

Cluster analysis methods seek to partition a data set into homogeneous subgroups. It is useful in a wide variety of applications, including document processing and modern genetics. Conventional clustering methods are unsupervised, meaning that there is no outcome variable nor is anything known about the relationship between the observations in the data set. In many situations, however, information about the clusters is available in addition to the values of the features. For example, the cluster labels of some observations may be known, or certain observations may be known to belong to the same cluster. In other cases, one may wish to identify clusters that are associated with a particular outcome variable. This review describes several clustering algorithms (known as “semi-supervised clustering” methods) that can be applied in these situations. The majority of these methods are modifications of the popular k-means clustering method, and several of them will be described in detail. A brief description of some other semi-supervised clustering algorithms is also provided. PMID:24729830

The q-G method : A q-version of the Steepest Descent method for global optimization.

Science.gov (United States)

Soterroni, Aline C; Galski, Roberto L; Scarabello, Marluce C; Ramos, Fernando M

2015-01-01

In this work, the q-Gradient (q-G) method, a q-version of the Steepest Descent method, is presented. The main idea behind the q-G method is the use of the negative of the q-gradient vector of the objective function as the search direction. The q-gradient vector, or simply the q-gradient, is a generalization of the classical gradient vector based on the concept of Jackson's derivative from the q-calculus. Its use provides the algorithm an effective mechanism for escaping from local minima. The q-G method reduces to the Steepest Descent method when the parameter q tends to 1. The algorithm has three free parameters and it is implemented so that the search process gradually shifts from global exploration in the beginning to local exploitation in the end. We evaluated the q-G method on 34 test functions, and compared its performance with 34 optimization algorithms, including derivative-free algorithms and the Steepest Descent method. Our results show that the q-G method is competitive and has a great potential for solving multimodal optimization problems.

Downstream-Conditioned Maximum Entropy Method for Exit Boundary Conditions in the Lattice Boltzmann Method

Directory of Open Access Journals (Sweden)

Javier A. Dottori

2015-01-01

Full Text Available A method for modeling outflow boundary conditions in the lattice Boltzmann method (LBM based on the maximization of the local entropy is presented. The maximization procedure is constrained by macroscopic values and downstream components. The method is applied to fully developed boundary conditions of the Navier-Stokes equations in rectangular channels. Comparisons are made with other alternative methods. In addition, the new downstream-conditioned entropy is studied and it was found that there is a correlation with the velocity gradient during the flow development.

Grid generation methods

CERN Document Server

Liseikin, Vladimir D

2017-01-01

This new edition provides a description of current developments relating to grid methods, grid codes, and their applications to actual problems. Grid generation methods are indispensable for the numerical solution of differential equations. Adaptive grid-mapping techniques, in particular, are the main focus and represent a promising tool to deal with systems with singularities. This 3rd edition includes three new chapters on numerical implementations (10), control of grid properties (11), and applications to mechanical, fluid, and plasma related problems (13). Also the other chapters have been updated including new topics, such as curvatures of discrete surfaces (3). Concise descriptions of hybrid mesh generation, drag and sweeping methods, parallel algorithms for mesh generation have been included too. This new edition addresses a broad range of readers: students, researchers, and practitioners in applied mathematics, mechanics, engineering, physics and other areas of applications.

A novel method of S-box design based on chaotic map and composition method

International Nuclear Information System (INIS)

Lambić, Dragan

2014-01-01

Highlights: • Novel chaotic S-box generation method is presented. • Presented S-box has better cryptographic properties than other examples of chaotic S-boxes. • The advantages of the proposed method are the low complexity and large key space. -- Abstract: An efficient algorithm for obtaining random bijective S-boxes based on chaotic maps and composition method is presented. The proposed method is based on compositions of S-boxes from a fixed starting set. The sequence of the indices of starting S-boxes used is obtained by using chaotic maps. The results of performance test show that the S-box presented in this paper has good cryptographic properties. The advantages of the proposed method are the low complexity and the possibility to achieve large key space

Division of methods for counting helminths’ eggs and the problem of efficiency of these methods

Directory of Open Access Journals (Sweden)

Katarzyna Jaromin-Gleń

2017-03-01

Full Text Available From the sanitary and epidemiological aspects, information concerning the developmental forms of intestinal parasites, especially the eggs of helminths present in our environment in: water, soil, sandpits, sewage sludge, crops watered with wastewater are very important. The methods described in the relevant literature may be classified in various ways, primarily according to the methodology of the preparation of samples from environmental matrices prepared for analysis, and the sole methods of counting and chambers/instruments used for this purpose. In addition, there is a possibility to perform the classification of the research methods analyzed from the aspect of the method and time of identification of the individuals counted, or the necessity for staining them. Standard methods for identification of helminths’ eggs from environmental matrices are usually characterized by low efficiency, i.e. from 30% to approximately 80%. The efficiency of the method applied may be measured in a dual way, either by using the method of internal standard or the ‘Split/Spike’ method. While measuring simultaneously in an examined object the efficiency of the method and the number of eggs, the ‘actual’ number of eggs may be calculated by multiplying the obtained value of the discovered eggs of helminths by inverse efficiency.

Seismic design and analysis methods

International Nuclear Information System (INIS)

Varpasuo, P.

1993-01-01

Seismic load is in many areas of the world the most important loading situation from the point of view of structural strength. Taking this into account it is understandable, that there has been a strong allocation of resources in the seismic analysis during the past ten years. In this study there are three areas of the center of gravity: (1) Random vibrations; (2) Soil-structure interaction and (3) The methods for determining structural response. The solution of random vibration problems is clarified with the aid of applications in this study and from the point of view of mathematical treatment and mathematical formulations it is deemed sufficient to give the relevant sources. In the soil-structure interaction analysis the focus has been the significance of frequency dependent impedance functions. As a result it was obtained, that the description of the soil with the aid of frequency dependent impedance functions decreases the structural response and it is thus always the preferred method when compared to more conservative analysis types. From the methods to determine the C structural response the following four were tested: (1) The time history method; (2) The complex frequency-response method; (3) Response spectrum method and (4) The equivalent static force method. The time history appeared to be the most accurate method and the complex frequency-response method did have the widest area of application. (orig.). (14 refs., 35 figs.)

More than Method?: A Discussion of Paradigm Differences within Mixed Methods Research

Science.gov (United States)

Harrits, Gitte Sommer

2011-01-01

This article challenges the idea that mixed methods research (MMR) constitutes a coherent research paradigm and explores how different research paradigms exist within MMR. Tracing paradigmatic differences at the level of methods, ontology, and epistemology, two MMR strategies are discussed: nested analysis, recently presented by the American…

Panel-basierte Mixed-Methods-Studien

OpenAIRE

Legewie, Nicolas; Tucci, Ingrid

2016-01-01

Mixed-Methods-Studien erfreuen sich wachsender Beliebtheit. Immer mehr Studien nutzen dabei auch Panel-basierte Mixed-Methods-Designs, in denen bestehende Längsschnittstudien durch qualitative Befragungsformen ergänzt werden. Innerhalb der reichhaltigen Veröffentlichungen zum Thema Mixed-Methods-Forschung finden sich bisher aber kaum Diskussionen solcher Mixed-Methods-Designs. Im vorliegenden Artikel diskutieren wir Design, Durchführung, sowie Potenzialeund Herausforderungen von Panel-basiert...

Bayesian methods for data analysis

CERN Document Server

Carlin, Bradley P.

2009-01-01

Approaches for statistical inference Introduction Motivating Vignettes Defining the Approaches The Bayes-Frequentist Controversy Some Basic Bayesian Models The Bayes approach Introduction Prior Distributions Bayesian Inference Hierarchical Modeling Model Assessment Nonparametric Methods Bayesian computation Introduction Asymptotic Methods Noniterative Monte Carlo Methods Markov Chain Monte Carlo Methods Model criticism and selection Bayesian Modeling Bayesian Robustness Model Assessment Bayes Factors via Marginal Density Estimation Bayes Factors

Molecular methods for biofilms

KAUST Repository

Ferrera, Isabel

2014-08-30

This chapter deals with both classical and modern molecular methods that can be useful for the identification of microorganisms, elucidation and comparison of microbial communities, and investigation of their diversity and functions. The most important and critical steps necessary for all molecular methods is DNA isolation from microbial communities and environmental samples; these are discussed in the first part. The second part provides an overview over DNA polymerase chain reaction (PCR) amplification and DNA sequencing methods. Protocols and analysis software as well as potential pitfalls associated with application of these methods are discussed. Community fingerprinting analyses that can be used to compare multiple microbial communities are discussed in the third part. This part focuses on Denaturing Gradient Gel Electrophoresis (DGGE), Terminal Restriction Fragment Length Polymorphism (T-RFLP) and Automated rRNA Intergenic Spacer Analysis (ARISA) methods. In addition, classical and next-generation metagenomics methods are presented. These are limited to bacterial artificial chromosome and Fosmid libraries and Sanger and next-generation 454 sequencing, as these methods are currently the most frequently used in research. Isolation of nucleic acids: This chapter discusses, the most important and critical steps necessary for all molecular methods is DNA isolation from microbial communities and environmental samples. Nucleic acid isolation methods generally include three steps: cell lysis, removal of unwanted substances, and a final step of DNA purification and recovery. The first critical step is the cell lysis, which can be achieved by enzymatic or mechanical procedures. Removal of proteins, polysaccharides and other unwanted substances is likewise important to avoid their interference in subsequent analyses. Phenol-chloroform-isoamyl alcohol is commonly used to recover DNA, since it separates nucleic acids into an aqueous phase and precipitates proteins and

Molecular methods for biofilms

KAUST Repository

Ferrera, Isabel; Balagué , Vanessa; Voolstra, Christian R.; Aranda, Manuel; Bayer, Till; Abed, Raeid M.M.; Dobretsov, Sergey; Owens, Sarah M.; Wilkening, Jared; Fessler, Jennifer L.; Gilbert, Jack A.

2014-01-01

This chapter deals with both classical and modern molecular methods that can be useful for the identification of microorganisms, elucidation and comparison of microbial communities, and investigation of their diversity and functions. The most important and critical steps necessary for all molecular methods is DNA isolation from microbial communities and environmental samples; these are discussed in the first part. The second part provides an overview over DNA polymerase chain reaction (PCR) amplification and DNA sequencing methods. Protocols and analysis software as well as potential pitfalls associated with application of these methods are discussed. Community fingerprinting analyses that can be used to compare multiple microbial communities are discussed in the third part. This part focuses on Denaturing Gradient Gel Electrophoresis (DGGE), Terminal Restriction Fragment Length Polymorphism (T-RFLP) and Automated rRNA Intergenic Spacer Analysis (ARISA) methods. In addition, classical and next-generation metagenomics methods are presented. These are limited to bacterial artificial chromosome and Fosmid libraries and Sanger and next-generation 454 sequencing, as these methods are currently the most frequently used in research. Isolation of nucleic acids: This chapter discusses, the most important and critical steps necessary for all molecular methods is DNA isolation from microbial communities and environmental samples. Nucleic acid isolation methods generally include three steps: cell lysis, removal of unwanted substances, and a final step of DNA purification and recovery. The first critical step is the cell lysis, which can be achieved by enzymatic or mechanical procedures. Removal of proteins, polysaccharides and other unwanted substances is likewise important to avoid their interference in subsequent analyses. Phenol-chloroform-isoamyl alcohol is commonly used to recover DNA, since it separates nucleic acids into an aqueous phase and precipitates proteins and

Experimental physics method

International Nuclear Information System (INIS)

Jeong, Yang Su; Oh, Byeong Seong

2010-05-01

This book introduces measurement and error, statistics of experimental data, population, sample variable, distribution function, propagation of error, mean and measurement of error, adjusting to rectilinear equation, common sense of error, experiment method, and record and statement. It also explains importance of error of estimation, systematic error, random error, treatment of single variable, significant figure, deviation, mean value, median, mode, sample mean, sample standard deviation, binomial distribution, gauss distribution, and method of least squares.

Nuclear physics mathematical methods

International Nuclear Information System (INIS)

Balian, R.; Gervois, A.; Giannoni, M.J.; Levesque, D.; Maille, M.

1984-01-01

The nuclear physics mathematical methods, applied to the collective motion theory, to the reduction of the degrees of freedom and to the order and disorder phenomena; are investigated. In the scope of the study, the following aspects are discussed: the entropy of an ensemble of collective variables; the interpretation of the dissipation, applying the information theory; the chaos and the universality; the Monte-Carlo method applied to the classical statistical mechanics and quantum mechanics; the finite elements method, and the classical ergodicity [fr

Hanford environmental analytical methods (methods as of March 1990)

International Nuclear Information System (INIS)

Goheen, S.D.; McCulloch, M.; Daniel, J.L.

1993-05-01

Information is provided on the techniques employed towards the chemical analysis of volatile, semi-volatile matter, pesticides and PCB's at the Hanford Reservation. Sample preparation methods are included

GEM simulation methods development

International Nuclear Information System (INIS)

Tikhonov, V.; Veenhof, R.

2002-01-01

A review of methods used in the simulation of processes in gas electron multipliers (GEMs) and in the accurate calculation of detector characteristics is presented. Such detector characteristics as effective gas gain, transparency, charge collection and losses have been calculated and optimized for a number of GEM geometries and compared with experiment. A method and a new special program for calculations of detector macro-characteristics such as signal response in a real detector readout structure, and spatial and time resolution of detectors have been developed and used for detector optimization. A detailed development of signal induction on readout electrodes and electronics characteristics are included in the new program. A method for the simulation of charging-up effects in GEM detectors is described. All methods show good agreement with experiment

Section for qualitative methods (Letter)

OpenAIRE

Todd, Z.; Madill, A.

2004-01-01

Qualitative research methods are increasingly used in all areas of psychology. We have proposed a new Section – the Qualitative Methods in Psychology Section – for anyone with an interest in using these research methods.

Dosimetry methods

DEFF Research Database (Denmark)

McLaughlin, W.L.; Miller, A.; Kovacs, A.

2003-01-01

Chemical and physical radiation dosimetry methods, used for the measurement of absorbed dose mainly during the practical use of ionizing radiation, are discussed with respect to their characteristics and fields of application....

comparison of elastic-plastic FE method and engineering method for RPV fracture mechanics analysis

International Nuclear Information System (INIS)

Sun Yingxue; Zheng Bin; Zhang Fenggang

2009-01-01

This paper described the FE analysis of elastic-plastic fracture mechanics for a crack in RPV belt line using ABAQUS code. It calculated and evaluated the stress intensity factor and J integral of crack under PTS transients. The result is also compared with that by engineering analysis method. It shows that the results using engineering analysis method is a little larger than the results using FE analysis of 3D elastic-plastic fracture mechanics, thus the engineering analysis method is conservative than the elastic-plastic fracture mechanics method. (authors)

Understanding common statistical methods, Part I: descriptive methods, probability, and continuous data.

Science.gov (United States)

Skinner, Carl G; Patel, Manish M; Thomas, Jerry D; Miller, Michael A

2011-01-01

Statistical methods are pervasive in medical research and general medical literature. Understanding general statistical concepts will enhance our ability to critically appraise the current literature and ultimately improve the delivery of patient care. This article intends to provide an overview of the common statistical methods relevant to medicine.

Kontexte qualitativer Sozialforschung: Arts-Based Research, Mixed Methods und Emergent Methods

OpenAIRE

Schreier, Margrit

2017-01-01

In dem vorliegenden Beitrag werden drei Kontexte qualitativer Sozialforschung genauer dargestellt, die in den vergangenen Jahren zunehmend an Bedeutung gewonnen haben: Arts-Based Research, Mixed Methods und Emergent Methods. Es werden verschiedene Ansätze und Varianten von Arts-Informed und Arts-Based Research genauer beschrieben, und es wird argumentiert, dass Arts-Based Research eine eigenständige Forschungstradition darstellt, die der qualitativen Sozialforschung wichtige Impulse geben kan...

Advances in Numerical Methods

CERN Document Server

Mastorakis, Nikos E

2009-01-01

Features contributions that are focused on significant aspects of current numerical methods and computational mathematics. This book carries chapters that advanced methods and various variations on known techniques that can solve difficult scientific problems efficiently.

Discrete Lattice effect of various forcing methods of body force on immersed Boundary-Lattice Boltzmann method

Energy Technology Data Exchange (ETDEWEB)

Son, Sung Wan; Ha, Man Yeong; Yoon, Hyun Sik [Pusan National University, Busan (Korea, Republic of); Jeong, Hae Kwon [POSCO, Pohang (Korea, Republic of); Balachandar, S. [University of Florida, Florida (United States)

2013-02-15

We investigate the discrete lattice effect of various forcing methods in the lattice Boltzmann method (LBM) to include the body force obtained from the immersed boundary method (IBM). In the immersed boundary lattice Boltzmann method (IB-LBM), the LBM needs a forcing method to involve the body force on a forcing point near the immersed boundary that is calculated by IBM. The proper forcing method in LBM is derived to include the body force, which appears to resolve problems such as multiphase flow, non-ideal gas behavior, etc. Many researchers have adopted different forcing methods in LBM to involve the body force from IBM, even when they solved similar problems. However, it is necessary to evaluate the discrete lattice effect, which originates from different forcing methods in LBM, to include the effect of the body force from IBM on the results. Consequently, in this study, a rigorous analysis of the discrete lattice effect for different forcing methods in IB-LBM is performed by solving various problems.

Discrete Lattice effect of various forcing methods of body force on immersed Boundary-Lattice Boltzmann method

International Nuclear Information System (INIS)

Son, Sung Wan; Ha, Man Yeong; Yoon, Hyun Sik; Jeong, Hae Kwon; Balachandar, S.

2013-01-01

We investigate the discrete lattice effect of various forcing methods in the lattice Boltzmann method (LBM) to include the body force obtained from the immersed boundary method (IBM). In the immersed boundary lattice Boltzmann method (IB-LBM), the LBM needs a forcing method to involve the body force on a forcing point near the immersed boundary that is calculated by IBM. The proper forcing method in LBM is derived to include the body force, which appears to resolve problems such as multiphase flow, non-ideal gas behavior, etc. Many researchers have adopted different forcing methods in LBM to involve the body force from IBM, even when they solved similar problems. However, it is necessary to evaluate the discrete lattice effect, which originates from different forcing methods in LBM, to include the effect of the body force from IBM on the results. Consequently, in this study, a rigorous analysis of the discrete lattice effect for different forcing methods in IB-LBM is performed by solving various problems.

Interactive Nonlinear Multiobjective Optimization Methods

OpenAIRE

Miettinen, Kaisa; Hakanen, Jussi; Podkopaev, Dmitry

2016-01-01

An overview of interactive methods for solving nonlinear multiobjective optimization problems is given. In interactive methods, the decision maker progressively provides preference information so that the most satisfactory Pareto optimal solution can be found for her or his. The basic features of several methods are introduced and some theoretical results are provided. In addition, references to modifications and applications as well as to other methods are indicated. As the...

A method simulating random magnetic field in interplanetary space by an autoregressive method

International Nuclear Information System (INIS)

Kato, Masahito; Sakai, Takasuke

1985-01-01

With an autoregressive method, we tried to generate the random noise fitting in with the power spectrum which can be analytically Fouriertransformed into an autocorrelation function. Although we can not directly compare our method with FFT by Owens (1978), we can only point out the following; FFT method should determine at first the number of data points N, or the total length to be generated and we cannot generate random data more than N. Because, beyond the NΔy, the generated data repeats the same pattern as below NΔy, where Δy = minimum interval for random noise. So if you want to change or increase N after generating the random noise, you should start the generation from the first step. The characteristic of the generated random number may depend upon the number of N, judging from the generating method. Once the prediction error filters are determined, our method can produce successively the random numbers, that is, we can possibly extend N to infinite without any effort. (author)

Using an Augmented Lagrangian Method and block fracturing in the DDA method

International Nuclear Information System (INIS)

Lin, C.T.; Amadei, B.; Sture, S.

1994-01-01

This paper presents two extensions to the Discontinuous Deformation Analysis (DDA) method orginally proposed by Shi for modeling the response of blocky rock masses to mechanical loading. The first extension consists of improving the block contact algorithm. An Augmented Lagrangian Method is used to replace the Penalty Method orginally proposed. It allows Lagrange multipliers to be introduced without increasing the number of equations that need to be solved and thus, block contract forces can be calculated more accurately. A block fracturing capability based on a three-parameter Mohr-Coulomb criterion represents the second extension. It allows for shear or tensile fracturing of intact blocks and the formation of smaller blocks

Method of forming aluminum oxynitride material and bodies formed by such methods

Science.gov (United States)

Bakas, Michael P [Ammon, ID; Lillo, Thomas M [Idaho Falls, ID; Chu, Henry S [Idaho Falls, ID

2010-11-16

Methods of forming aluminum oxynitride (AlON) materials include sintering green bodies comprising aluminum orthophosphate or another sacrificial material therein. Such green bodies may comprise aluminum, oxygen, and nitrogen in addition to the aluminum orthophosphate. For example, the green bodies may include a mixture of aluminum oxide, aluminum nitride, and aluminum orthophosphate or another sacrificial material. Additional methods of forming aluminum oxynitride (AlON) materials include sintering a green body including a sacrificial material therein, using the sacrificial material to form pores in the green body during sintering, and infiltrating the pores formed in the green body with a liquid infiltrant during sintering. Bodies are formed using such methods.

Membranes, methods of making membranes, and methods of separating gases using membranes

Science.gov (United States)

Ho, W. S. Winston

2012-10-02

Membranes, methods of making membranes, and methods of separating gases using membranes are provided. The membranes can include at least one hydrophilic polymer, at least one cross-linking agent, at least one base, and at least one amino compound. The methods of separating gases using membranes can include contacting a gas stream containing at least one of CO.sub.2, H.sub.2S, and HCl with one side of a nonporous and at least one of CO.sub.2, H.sub.2S, and HCl selectively permeable membrane such that at least one of CO.sub.2, H.sub.2S, and HCl is selectively transported through the membrane.

Numerical methods using Matlab

CERN Document Server

Lindfield, George

2012-01-01

Numerical Methods using MATLAB, 3e, is an extensive reference offering hundreds of useful and important numerical algorithms that can be implemented into MATLAB for a graphical interpretation to help researchers analyze a particular outcome. Many worked examples are given together with exercises and solutions to illustrate how numerical methods can be used to study problems that have applications in the biosciences, chaos, optimization, engineering and science across the board. Numerical Methods using MATLAB, 3e, is an extensive reference offering hundreds of use

Generalized subspace correction methods

Energy Technology Data Exchange (ETDEWEB)

Kolm, P. [Royal Institute of Technology, Stockholm (Sweden); Arbenz, P.; Gander, W. [Eidgenoessiche Technische Hochschule, Zuerich (Switzerland)

1996-12-31

A fundamental problem in scientific computing is the solution of large sparse systems of linear equations. Often these systems arise from the discretization of differential equations by finite difference, finite volume or finite element methods. Iterative methods exploiting these sparse structures have proven to be very effective on conventional computers for a wide area of applications. Due to the rapid development and increasing demand for the large computing powers of parallel computers, it has become important to design iterative methods specialized for these new architectures.

Comparison of the xenon-133 washout method with the microsphere method in dog brain perfusion studies

International Nuclear Information System (INIS)

Heikkitae, J.; Kettunen, R.; Ahonen, A.

1982-01-01

The validity of the Xenon-washout method in estimation of regional cerebral blood flow was tested against a radioactive microsphere method in anaesthetized dogs. The two compartmental model seemed not to be well suited for cerebral perfusion studies by Xe-washout method, although bi-exponential analysis of washout curves gave perfusion values correlating with the microsphere method but depending on calculation method

A multigrid method for variational inequalities

Energy Technology Data Exchange (ETDEWEB)

Oliveira, S.; Stewart, D.E.; Wu, W.

1996-12-31

Multigrid methods have been used with great success for solving elliptic partial differential equations. Penalty methods have been successful in solving finite-dimensional quadratic programs. In this paper these two techniques are combined to give a fast method for solving obstacle problems. A nonlinear penalized problem is solved using Newton`s method for large values of a penalty parameter. Multigrid methods are used to solve the linear systems in Newton`s method. The overall numerical method developed is based on an exterior penalty function, and numerical results showing the performance of the method have been obtained.

An adjoint sensitivity-based data assimilation method and its comparison with existing variational methods

Directory of Open Access Journals (Sweden)

Yonghan Choi

2014-01-01

Full Text Available An adjoint sensitivity-based data assimilation (ASDA method is proposed and applied to a heavy rainfall case over the Korean Peninsula. The heavy rainfall case, which occurred on 26 July 2006, caused torrential rainfall over the central part of the Korean Peninsula. The mesoscale convective system (MCS related to the heavy rainfall was classified as training line/adjoining stratiform (TL/AS-type for the earlier period, and back building (BB-type for the later period. In the ASDA method, an adjoint model is run backwards with forecast-error gradient as input, and the adjoint sensitivity of the forecast error to the initial condition is scaled by an optimal scaling factor. The optimal scaling factor is determined by minimising the observational cost function of the four-dimensional variational (4D-Var method, and the scaled sensitivity is added to the original first guess. Finally, the observations at the analysis time are assimilated using a 3D-Var method with the improved first guess. The simulated rainfall distribution is shifted northeastward compared to the observations when no radar data are assimilated or when radar data are assimilated using the 3D-Var method. The rainfall forecasts are improved when radar data are assimilated using the 4D-Var or ASDA method. Simulated atmospheric fields such as horizontal winds, temperature, and water vapour mixing ratio are also improved via the 4D-Var or ASDA method. Due to the improvement in the analysis, subsequent forecasts appropriately simulate the observed features of the TL/AS- and BB-type MCSs and the corresponding heavy rainfall. The computational cost associated with the ASDA method is significantly lower than that of the 4D-Var method.

GLIMM'S METHOD FOR GAS DYNAMICS

Energy Technology Data Exchange (ETDEWEB)

Colella, Phillip

1980-07-01

We investigate Glimm's method, a method for constructing approximate solutions to systems of hyperbolic conservation laws in one space variable by sampling explicit wave solutions. It is extended to several space variables by operator splitting. We consider two functional problems. 1) We propose a highly accurate form of the sampling procedure, in one space variable, based on the van der Corput sampling sequence. We test the improved sampling procedure numerically in the case of inviscid compressible flow in one space dimension and find that it gives high resolution results both in the smooth parts of the solution, as well as the discontinuities. 2) We investigate the operator splitting procedure by means of which the multidimensional method is constructed. An 0(1) error stemming from the use of this procedure near shocks oblique to the spatial grid is analyzed numerically in the case of the equations for inviscid compressible flow in two space dimensions. We present a hybrid method which eliminates this error, consisting of Glimm's method, used in continuous parts of the flow, and the nonlinear Godunov's method, used in regions where large pressure jumps are generated. The resulting method is seen to be a substantial improvement over either of the component methods for multidimensional calculations.

Forming a method mindset: The role of knowledge and preference in facilitating heuristic method usage in design

DEFF Research Database (Denmark)

Daalhuizen, Jaap; Person, Oscar; Gattol, Valentin

2013-01-01

Both systematic and heuristic methods are common practice when designing. Yet, in teaching students how to design, heuristic methods are typically only granted a secondary role. So, how do designers and students develop a mindset for using heuristic methods? In this paper, we study how prior...... knowledge (about heuristic methods and their usage) and preference (for using heuristic methods) relate to the reported use of heuristic methods when designing. Drawing on a survey among 304 students enrolled in a master-level course on design theory and methodology, we investigated method usage for five...... indirectly influenced method usage through a 'complementary' mediation of method preference....

A comparison of interface tracking methods

International Nuclear Information System (INIS)

Kothe, D.B.; Rider, W.J.

1995-01-01

In this Paper we provide a direct comparison of several important algorithms designed to track fluid interfaces. In the process we propose improved criteria by which these methods are to be judged. We compare and contrast the behavior of the following interface tracking methods: high order monotone capturing schemes, level set methods, volume-of-fluid (VOF) methods, and particle-based (particle-in-cell, or PIC) methods. We compare these methods by first applying a set of standard test problems, then by applying a new set of enhanced problems designed to expose the limitations and weaknesses of each method. We find that the properties of these methods are not adequately assessed until they axe tested with flows having spatial and temporal vorticity gradients. Our results indicate that the particle-based methods are easily the most accurate of those tested. Their practical use, however, is often hampered by their memory and CPU requirements. Particle-based methods employing particles only along interfaces also have difficulty dealing with gross topology changes. Full PIC methods, on the other hand, do not in general have topology restrictions. Following the particle-based methods are VOF volume tracking methods, which are reasonably accurate, physically based, robust, low in cost, and relatively easy to implement. Recent enhancements to the VOF methods using multidimensional interface reconstruction and improved advection provide excellent results on a wide range of test problems

Numerical Methods Application for Reinforced Concrete Elements-Theoretical Approach for Direct Stiffness Matrix Method

Directory of Open Access Journals (Sweden)

Sergiu Ciprian Catinas

2015-07-01

Full Text Available A detailed theoretical and practical investigation of the reinforced concrete elements is due to recent techniques and method that are implemented in the construction market. More over a theoretical study is a demand for a better and faster approach nowadays due to rapid development of the calculus technique. The paper above will present a study for implementing in a static calculus the direct stiffness matrix method in order capable to address phenomena related to different stages of loading, rapid change of cross section area and physical properties. The method is a demand due to the fact that in our days the FEM (Finite Element Method is the only alternative to such a calculus and FEM are considered as expensive methods from the time and calculus resources point of view. The main goal in such a method is to create the moment-curvature diagram in the cross section that is analyzed. The paper above will express some of the most important techniques and new ideas as well in order to create the moment curvature graphic in the cross sections considered.

Multivariate methods for particle identification

CERN Document Server

Visan, Cosmin

2013-01-01

The purpose of this project was to evaluate several MultiVariate methods in order to determine which one, if any, offers better results in Particle Identification (PID) than a simple n$\\sigma$ cut on the response of the ALICE PID detectors. The particles considered in the analysis were Pions, Kaons and Protons and the detectors used were TPC and TOF. When used with the same input n$\\sigma$ variables, the results show similar perfoance between the Rectangular Cuts Optimization method and the simple n$\\sigma$ cuts. The method MLP and BDT show poor results for certain ranges of momentum. The KNN method is the best performing, showing similar results for Pions and Protons as the Cuts method, and better results for Kaons. The extension of the methods to include additional input variables leads to poor results, related to instabilities still to be investigated.

Negotiating a Systems Development Method

Science.gov (United States)

Karlsson, Fredrik; Hedström, Karin

Systems development methods (or methods) are often applied in tailored version to fit the actual situation. Method tailoring is in most the existing literature viewed as either (a) a highly rational process with the method engineer as the driver where the project members are passive information providers or (b) an unstructured process where the systems developer makes individual choices, a selection process without any driver. The purpose of this chapter is to illustrate that important design decisions during method tailoring are made by project members through negotiation. The study has been carried out using the perspective of actor-network theory. Our narratives depict method tailoring as more complex than (a) and (b) show the driver role rotates between the project members, and design decisions are based on influences from several project members. However, these design decisions are not consensus decisions.

Microencapsulation and Electrostatic Processing Method

Science.gov (United States)

Morrison, Dennis R. (Inventor); Mosier, Benjamin (Inventor)

2000-01-01

Methods are provided for forming spherical multilamellar microcapsules having alternating hydrophilic and hydrophobic liquid layers, surrounded by flexible, semi-permeable hydrophobic or hydrophilic outer membranes which can be tailored specifically to control the diffusion rate. The methods of the invention rely on low shear mixing and liquid-liquid diffusion process and are particularly well suited for forming microcapsules containing both hydrophilic and hydrophobic drugs. These methods can be carried out in the absence of gravity and do not rely on density-driven phase separation, mechanical mixing or solvent evaporation phases. The methods include the process of forming, washing and filtering microcapsules. In addition, the methods contemplate coating microcapsules with ancillary coatings using an electrostatic field and free fluid electrophoresis of the microcapsules. The microcapsules produced by such methods are particularly useful in the delivery of pharmaceutical compositions.

T-Stability of the Heun Method and Balanced Method for Solving Stochastic Differential Delay Equations

Directory of Open Access Journals (Sweden)

Xiaolin Zhu

2014-01-01

Full Text Available This paper studies the T-stability of the Heun method and balanced method for solving stochastic differential delay equations (SDDEs. Two T-stable conditions of the Heun method are obtained for two kinds of linear SDDEs. Moreover, two conditions under which the balanced method is T-stable are obtained for two kinds of linear SDDEs. Some numerical examples verify the theoretical results proposed.

Methods for purifying carbon materials

Science.gov (United States)

Dailly, Anne [Pasadena, CA; Ahn, Channing [Pasadena, CA; Yazami, Rachid [Los Angeles, CA; Fultz, Brent T [Pasadena, CA

2009-05-26

Methods of purifying samples are provided that are capable of removing carbonaceous and noncarbonaceous impurities from a sample containing a carbon material having a selected structure. Purification methods are provided for removing residual metal catalyst particles enclosed in multilayer carbonaceous impurities in samples generate by catalytic synthesis methods. Purification methods are provided wherein carbonaceous impurities in a sample are at least partially exfoliated, thereby facilitating subsequent removal of carbonaceous and noncarbonaceous impurities from the sample. Methods of purifying carbon nanotube-containing samples are provided wherein an intercalant is added to the sample and subsequently reacted with an exfoliation initiator to achieve exfoliation of carbonaceous impurities.

An improvement on LSB+ method

OpenAIRE

Qazanfari, Kazem; Ghaemmaghami, Shahrokh

2017-01-01

The Least Significant Bit (LSB) substitution is an old and simple data hiding method that could almost effortlessly be implemented in spatial or transform domain over any digital media. This method can be attacked by several steganalysis methods, because it detectably changes statistical and perceptual characteristics of the cover signal. A typical method for steganalysis of the LSB substitution is the histogram attack that attempts to diagnose anomalies in the cover image's histogram. A well...

Methods for Equating Mental Tests.

Science.gov (United States)

1984-11-01

1983) compared conventional and IRT methods for equating the Test of English as a Foreign Language ( TOEFL ) after chaining. Three conventional and...three IRT equating methods were examined in this study; two sections of TOEFL were each (separately) equated. The IRT methods included the following: (a...group. A separate base form was established for each of the six equating methods. Instead of equating the base-form TOEFL to itself, the last (eighth

The three circle method

International Nuclear Information System (INIS)

Garncarek, Z.

1989-01-01

The three circle method in its general form is presented. The method is especially useful for investigation of shapes of agglomerations of objects. An example of its applications to investigation of galaxies distribution is given. 17 refs. (author)

Advances in iterative methods

International Nuclear Information System (INIS)

Beauwens, B.; Arkuszewski, J.; Boryszewicz, M.

1981-01-01

Results obtained in the field of linear iterative methods within the Coordinated Research Program on Transport Theory and Advanced Reactor Calculations are summarized. The general convergence theory of linear iterative methods is essentially based on the properties of nonnegative operators on ordered normed spaces. The following aspects of this theory have been improved: new comparison theorems for regular splittings, generalization of the notions of M- and H-matrices, new interpretations of classical convergence theorems for positive-definite operators. The estimation of asymptotic convergence rates was developed with two purposes: the analysis of model problems and the optimization of relaxation parameters. In the framework of factorization iterative methods, model problem analysis is needed to investigate whether the increased computational complexity of higher-order methods does not offset their increased asymptotic convergence rates, as well as to appreciate the effect of standard relaxation techniques (polynomial relaxation). On the other hand, the optimal use of factorization iterative methods requires the development of adequate relaxation techniques and their optimization. The relative performances of a few possibilities have been explored for model problems. Presently, the best results have been obtained with optimal diagonal-Chebyshev relaxation

Earth analysis methods, subsurface feature detection methods, earth analysis devices, and articles of manufacture

Science.gov (United States)

West, Phillip B [Idaho Falls, ID; Novascone, Stephen R [Idaho Falls, ID; Wright, Jerry P [Idaho Falls, ID

2011-09-27

Earth analysis methods, subsurface feature detection methods, earth analysis devices, and articles of manufacture are described. According to one embodiment, an earth analysis method includes engaging a device with the earth, analyzing the earth in a single substantially lineal direction using the device during the engaging, and providing information regarding a subsurface feature of the earth using the analysis.

Changes in the fish community of the Kpong Headpond, lower Volta River, Ghana after 25 years of impoundment

Directory of Open Access Journals (Sweden)

Theodore Quarcoopome

2011-12-01

Full Text Available The Kpong Headpond was the second created on the Volta River after Akosombo Dam, primarily as a source of hydroelectric power generation and potable water supply, and additionally, it has supported some fish production in Ghana since impoundment. The changes in fish community of the Kpong Headpond were studied to provide baseline information for strategies formulation to support the socio-economic development of the reservoir. The study identified changes in the fish community of the reservoir by comparing occurrence, composition, relative abundance and relative importance estimates of fish species, families and trophic groups, from available previous studies in the reservoir. From the collated information all fishes identified in the reservoir were categorised based on occurrence and importance as disappeared, appeared, permanent, declined or important, to show current status. The results indicated that the fish community has experienced a shift in the composition and relative abundance of important species, families and trophic groups in terms of number and weight, while remaining ecologically balanced. Representatives of the families Osteoglossidae, Centropomidae and Characidae have declined while representatives of the families Claroteidae, Cyprinidae and Cichlidae have increased. The aufwuch-detritus and herbivores declined while semi-pelagic omnivores increased resulting in a shift in dominance to benthic and semi pelagic omnivores. The appearance of five species and the disappearance of 25 others indicated a dynamic restructuring of the fish community in the reservoir, as expected. Enforcement of fishing regulations including the use of appropriate gear and fishing methods, fishery access control, promotion of culture-based fisheries and improvement in fisher education are recommended topics for sustainable fisheries in the reservoir. Rev. Biol. Trop. 59 (4: 1685-1696. Epub 2011 December 01.La laguna Kpong se convirtió en la segunda

Analysis methods used by the geochemistry department; Methodes d'analyses utilisees par la section de geochimie

Energy Technology Data Exchange (ETDEWEB)

Berthollet, P.

1958-06-15

This note presents various analytical techniques which are respectively used for the dosing of uranium in soils (fluorescence method, chromatographic method), for the dosing of uranium in natural waters (ion exchange method, evaporation method), and for the dosing of uranium in plants. Principles, equipment and products, reactant preparation, operation mode, sample preparation and measurements, expression of results and calculations) are indicated for each of these methods.

Nuclear safeguards and export controls

International Nuclear Information System (INIS)

Mueller, H.

1994-01-01

Precisely from the perspective of the two most important nonnuclear weapons states, Japan and Germany, the safeguards and arms control agendas have not been finally dealt with. Because of their central position in the nonproliferation regime as nuclear suppliers and states with large nuclear energy industries, both countries are compelled to take a leading role in pursuing future reforms. In the dialogue with the nonaligned, this leadership position is helped by their nonnuclear status. In fact, Japan and Germany have some interests in common with the nonaligned states, such as the expansion of safeguards in the nuclear weapons states. To be sure, both Japan and Germany will pursue such interests with due regard to the interests of their friends and allies. For Japan, maintaining a close relationship with the United States is as important as shaping viable relations with China. Initiatives and controversies on nuclear policy must be weighed against this interest. By the same token, Germany must take into account the dense network of relations with its allies and with Russia, in addition to the German-French friendship. This will always set limits to Germany's readiness to confront the nuclear weapons states on nuclear issues. This, however, does not mean that both countries must shut up when the P 5 speak. The nuclear weapons register and the extension of the ''erga omnes'' rule in export controls, for example, should not be relegated to the dustbin of history, just because some friendly nuclear powers don't like these ideas. (orig.)

Sequential Optimization of Global Sequence Alignments Relative to Different Cost Functions

KAUST Repository

Odat, Enas M.

2011-05-01

The purpose of this dissertation is to present a methodology to model global sequence alignment problem as directed acyclic graph which helps to extract all possible optimal alignments. Moreover, a mechanism to sequentially optimize sequence alignment problem relative to different cost functions is suggested. Sequence alignment is mostly important in computational biology. It is used to find evolutionary relationships between biological sequences. There are many algo- rithms that have been developed to solve this problem. The most famous algorithms are Needleman-Wunsch and Smith-Waterman that are based on dynamic program- ming. In dynamic programming, problem is divided into a set of overlapping sub- problems and then the solution of each subproblem is found. Finally, the solutions to these subproblems are combined into a final solution. In this thesis it has been proved that for two sequences of length m and n over a fixed alphabet, the suggested optimization procedure requires O(mn) arithmetic operations per cost function on a single processor machine. The algorithm has been simulated using C#.Net programming language and a number of experiments have been done to verify the proved statements. The results of these experiments show that the number of optimal alignments is reduced after each step of optimization. Furthermore, it has been verified that as the sequence length increased linearly then the number of optimal alignments increased exponentially which also depends on the cost function that is used. Finally, the number of executed operations increases polynomially as the sequence length increase linearly.

IEEE 802.15.4 Frame Aggregation Enhancement to Provide High Performance in Life-Critical Patient Monitoring Systems.

Science.gov (United States)

Akbar, Muhammad Sajjad; Yu, Hongnian; Cang, Shuang

2017-01-28

In wireless body area sensor networks (WBASNs), Quality of Service (QoS) provision for patient monitoring systems in terms of time-critical deadlines, high throughput and energy efficiency is a challenging task. The periodic data from these systems generates a large number of small packets in a short time period which needs an efficient channel access mechanism. The IEEE 802.15.4 standard is recommended for low power devices and widely used for many wireless sensor networks applications. It provides a hybrid channel access mechanism at the Media Access Control (MAC) layer which plays a key role in overall successful transmission in WBASNs. There are many WBASN's MAC protocols that use this hybrid channel access mechanism in variety of sensor applications. However, these protocols are less efficient for patient monitoring systems where life critical data requires limited delay, high throughput and energy efficient communication simultaneously. To address these issues, this paper proposes a frame aggregation scheme by using the aggregated-MAC protocol data unit (A-MPDU) which works with the IEEE 802.15.4 MAC layer. To implement the scheme accurately, we develop a traffic patterns analysis mechanism to understand the requirements of the sensor nodes in patient monitoring systems, then model the channel access to find the performance gap on the basis of obtained requirements, finally propose the design based on the needs of patient monitoring systems. The mechanism is initially verified using numerical modelling and then simulation is conducted using NS2.29, Castalia 3.2 and OMNeT++. The proposed scheme provides the optimal performance considering the required QoS.

HÁBITOS ALIMENTICIOS DE LA ARAHUANA Osteoglossum bicirrhosum (CUVIER, 1829 EN LA CUENCA MEDIO DEL RÍO PUTUMAYO - EL ESTRECHO, LORETO, PERÚ

Directory of Open Access Journals (Sweden)

Bray Torres Del Castillo

2012-06-01

Full Text Available El objetivo del presente trabajo fue estudiar los hábitos alimenticios de la arahuana Osteoglossum bicirrhosum en la cuenca media del río Putumayo. Para tal fin, fueron colectados un total de 222 estómagos de especímenes de varias tallas, durante el período de un año, iniciándose en marzo de 2008 y concluyendo en abril de 2009. El análisis del contenido estomacal determinó que el 73% de los estómagos contenían alimento y el 27% no. Mediante el uso del índice de importancia alimenticia (IAi, y el coeficiente alimenticio (Q, se observó una preferencia por los insectos, peces y moluscos, siendo las aves, mamíferos y restos vegetales alimentos secundarios. No se registraron diferencias significativas en el consumo de alimento de acuerdo al régimen hidrológico (p>0.05 ni al sexo (p>0.05. El análisis del IAi y Q, nos indica que el consumo de insectos presenta una relación inversa a los rangos de talla, es decir, a mayor nivel de talla menor consumo de insectos. En contraste, el consumo de peces se incrementó con el tamaño de los ejemplares de arahuana. En conclusión, la arahuana, en el rango de talla estudiado (de 31 a 87 cm, presenta un comportamiento alimenticio generalista y oportunista, de régimen omnívoro con fuerte tendencia a la carnivoría.

Extraction Methods, Variability Encountered in

NARCIS (Netherlands)

Bodelier, P.L.E.; Nelson, K.E.

2014-01-01

Synonyms Bias in DNA extractions methods; Variation in DNA extraction methods Definition The variability in extraction methods is defined as differences in quality and quantity of DNA observed using various extraction protocols, leading to differences in outcome of microbial community composition

Methods in Modern Biophysics

CERN Document Server

Nölting, Bengt

2010-01-01

Incorporating recent dramatic advances, this textbook presents a fresh and timely introduction to modern biophysical methods. An array of new, faster and higher-power biophysical methods now enables scientists to examine the mysteries of life at a molecular level. This innovative text surveys and explains the ten key biophysical methods, including those related to biophysical nanotechnology, scanning probe microscopy, X-ray crystallography, ion mobility spectrometry, mass spectrometry, proteomics, and protein folding and structure. Incorporating much information previously unavailable in tutorial form, Nölting employs worked examples and about 270 illustrations to fully detail the techniques and their underlying mechanisms. Methods in Modern Biophysics is written for advanced undergraduate and graduate students, postdocs, researchers, lecturers, and professors in biophysics, biochemistry and related fields. Special features in the 3rd edition: Introduces rapid partial protein ladder sequencing - an important...

Ensemble Data Mining Methods

Science.gov (United States)

Oza, Nikunj C.

2004-01-01

Ensemble Data Mining Methods, also known as Committee Methods or Model Combiners, are machine learning methods that leverage the power of multiple models to achieve better prediction accuracy than any of the individual models could on their own. The basic goal when designing an ensemble is the same as when establishing a committee of people: each member of the committee should be as competent as possible, but the members should be complementary to one another. If the members are not complementary, Le., if they always agree, then the committee is unnecessary---any one member is sufficient. If the members are complementary, then when one or a few members make an error, the probability is high that the remaining members can correct this error. Research in ensemble methods has largely revolved around designing ensembles consisting of competent yet complementary models.

Simulated annealing method for electronic circuits design: adaptation and comparison with other optimization methods; La methode du recuit simule pour la conception des circuits electroniques: adaptation et comparaison avec d`autres methodes d`optimisation

Energy Technology Data Exchange (ETDEWEB)

Berthiau, G

1995-10-01

The circuit design problem consists in determining acceptable parameter values (resistors, capacitors, transistors geometries ...) which allow the circuit to meet various user given operational criteria (DC consumption, AC bandwidth, transient times ...). This task is equivalent to a multidimensional and/or multi objective optimization problem: n-variables functions have to be minimized in an hyper-rectangular domain ; equality constraints can be eventually specified. A similar problem consists in fitting component models. In this way, the optimization variables are the model parameters and one aims at minimizing a cost function built on the error between the model response and the data measured on the component. The chosen optimization method for this kind of problem is the simulated annealing method. This method, provided by the combinatorial optimization domain, has been adapted and compared with other global optimization methods for the continuous variables problems. An efficient strategy of variables discretization and a set of complementary stopping criteria have been proposed. The different parameters of the method have been adjusted with analytical functions of which minima are known, classically used in the literature. Our simulated annealing algorithm has been coupled with an open electrical simulator SPICE-PAC of which the modular structure allows the chaining of simulations required by the circuit optimization process. We proposed, for high-dimensional problems, a partitioning technique which ensures proportionality between CPU-time and variables number. To compare our method with others, we have adapted three other methods coming from combinatorial optimization domain - the threshold method, a genetic algorithm and the Tabu search method - The tests have been performed on the same set of test functions and the results allow a first comparison between these methods applied to continuous optimization variables. (Abstract Truncated)

User-Centered Agile Methods

CERN Document Server

Beyer, Hugh

2010-01-01

With the introduction and popularization of Agile methods of software development, existing relationships and working agreements between user experience groups and developers are being disrupted. Agile methods introduce new concepts: the Product Owner, the Customer (but not the user), short iterations, User Stories. Where do UX professionals fit in this new world? Agile methods also bring a new mindset -- no big design, no specifications, minimal planning -- which conflict with the needs of UX design. This lecture discusses the key elements of Agile for the UX community and describes strategie

Electromigration method in radiochemistry

International Nuclear Information System (INIS)

Makarova, T.P.; Stepanov, A.V.

1977-01-01

Investigations are reviewd of the period 1969-1975 accomplished by such methods as zonal electrophoresis in countercurrent, focusing electrophoresis, isotachophoresis, electrophoresis with elution, continuous two-dimensional electrophoresis. Since the methods considered are based on the use of porous fillers for stabilizing the medium, some attention is given to the effect of the solid-solution interface on the shape and rate of motion of the zones of the rare-earth elements investigated, Sr and others. The trend of developing electrophoresis as a method for obtaining high-purity elements is emphasized

Methods for RNA Analysis

DEFF Research Database (Denmark)

Olivarius, Signe

of the transcriptome, 5’ end capture of RNA is combined with next-generation sequencing for high-throughput quantitative assessment of transcription start sites by two different methods. The methods presented here allow for functional investigation of coding as well as noncoding RNA and contribute to future...... RNAs rely on interactions with proteins, the establishment of protein-binding profiles is essential for the characterization of RNAs. Aiming to facilitate RNA analysis, this thesis introduces proteomics- as well as transcriptomics-based methods for the functional characterization of RNA. First, RNA...

Model Correction Factor Method

DEFF Research Database (Denmark)

Christensen, Claus; Randrup-Thomsen, Søren; Morsing Johannesen, Johannes

1997-01-01

The model correction factor method is proposed as an alternative to traditional polynomial based response surface techniques in structural reliability considering a computationally time consuming limit state procedure as a 'black box'. The class of polynomial functions is replaced by a limit...... of the model correction factor method, is that in simpler form not using gradient information on the original limit state function or only using this information once, a drastic reduction of the number of limit state evaluation is obtained together with good approximations on the reliability. Methods...

Imaging methods in otorhinolaryngology

International Nuclear Information System (INIS)

Frey, K.W.; Mees, K.; Vogl, T.

1989-01-01

This book is the work of an otorhinolaryngologist and two radiologists, who combined their experience and efforts in order to solve a great variety and number of problems encountered in practical work, taking into account the latest technical potentials and the practical feasibility, which is determined by the equipment available. Every chapter presents the full range of diagnostic methods applicable, starting with the suitable plain radiography methods and proceeding to the various tomographic scanning methods, including conventional tomography. Every technique is assessed in terms of diagnostic value and drawbacks. (orig./MG) With 778 figs [de

Proven Weight Loss Methods

Science.gov (United States)

Fact Sheet Proven Weight Loss Methods What can weight loss do for you? Losing weight can improve your health in a number of ways. It can lower ... at www.hormone.org/Spanish . Proven Weight Loss Methods Fact Sheet www.hormone.org

Mixed methods for telehealth research.

Science.gov (United States)

Caffery, Liam J; Martin-Khan, Melinda; Wade, Victoria

2017-10-01

Mixed methods research is important to health services research because the integrated qualitative and quantitative investigation can give a more comprehensive understanding of complex interventions such as telehealth than can a single-method study. Further, mixed methods research is applicable to translational research and program evaluation. Study designs relevant to telehealth research are described and supported by examples. Quality assessment tools, frameworks to assist in the reporting and review of mixed methods research, and related methodologies are also discussed.

Recrafting the Neighbor-Joining Method

DEFF Research Database (Denmark)

Mailund; Brodal, Gerth Stølting; Fagerberg, Rolf

2006-01-01

Background: The neighbor-joining method by Saitou and Nei is a widely used method for constructing phylogenetic trees. The formulation of the method gives rise to a canonical Θ(n3) algorithm upon which all existing implementations are based. Methods: In this paper we present techniques for speeding...... up the canonical neighbor-joining method. Our algorithms construct the same phylogenetic trees as the canonical neighbor-joining method. The best-case running time of our algorithms are O(n2) but the worst-case remains O(n3). We empirically evaluate the performance of our algoritms on distance...... matrices obtained from the Pfam collection of alignments. Results: The experiments indicate that the running time of our algorithms evolve as Θ(n2) on the examined instance collection. We also compare the running time with that of the QuickTree tool, a widely used efficient implementation of the canonical...

Vortex methods and vortex statistics

International Nuclear Information System (INIS)

Chorin, A.J.

1993-05-01

Vortex methods originated from the observation that in incompressible, inviscid, isentropic flow vorticity (or, more accurately, circulation) is a conserved quantity, as can be readily deduced from the absence of tangential stresses. Thus if the vorticity is known at time t = 0, one can deduce the flow at a later time by simply following it around. In this narrow context, a vortex method is a numerical method that makes use of this observation. Even more generally, the analysis of vortex methods leads, to problems that are closely related to problems in quantum physics and field theory, as well as in harmonic analysis. A broad enough definition of vortex methods ends up by encompassing much of science. Even the purely computational aspects of vortex methods encompass a range of ideas for which vorticity may not be the best unifying theme. The author restricts himself in these lectures to a special class of numerical vortex methods, those that are based on a Lagrangian transport of vorticity in hydrodynamics by smoothed particles (''blobs'') and those whose understanding contributes to the understanding of blob methods. Vortex methods for inviscid flow lead to systems of ordinary differential equations that can be readily clothed in Hamiltonian form, both in three and two space dimensions, and they can preserve exactly a number of invariants of the Euler equations, including topological invariants. Their viscous versions resemble Langevin equations. As a result, they provide a very useful cartoon of statistical hydrodynamics, i.e., of turbulence, one that can to some extent be analyzed analytically and more importantly, explored numerically, with important implications also for superfluids, superconductors, and even polymers. In the authors view, vortex ''blob'' methods provide the most promising path to the understanding of these phenomena

Discrete variational derivative method a structure-preserving numerical method for partial differential equations

CERN Document Server

Furihata, Daisuke

2010-01-01

Nonlinear Partial Differential Equations (PDEs) have become increasingly important in the description of physical phenomena. Unlike Ordinary Differential Equations, PDEs can be used to effectively model multidimensional systems. The methods put forward in Discrete Variational Derivative Method concentrate on a new class of ""structure-preserving numerical equations"" which improves the qualitative behaviour of the PDE solutions and allows for stable computing. The authors have also taken care to present their methods in an accessible manner, which means that the book will be useful to engineer

STUDY ON SIMULATION METHOD OF AVALANCHE : FLOW ANALYSIS OF AVALANCHE USING PARTICLE METHOD

OpenAIRE

塩澤, 孝哉

2015-01-01

In this paper, modeling for the simulation of the avalanche by a particle method is discussed. There are two kinds of the snow avalanches, one is the surface avalanche which shows a smoke-like flow, and another is the total-layer avalanche which shows a flow like Bingham fluid. In the simulation of the surface avalanche, the particle method in consideration of a rotation resistance model is used. The particle method by Bingham fluid is used in the simulation of the total-layer avalanche. At t...

Standard setting: Comparison of two methods

Directory of Open Access Journals (Sweden)

Oyebode Femi

2006-09-01

Full Text Available Abstract Background The outcome of assessments is determined by the standard-setting method used. There is a wide range of standard – setting methods and the two used most extensively in undergraduate medical education in the UK are the norm-reference and the criterion-reference methods. The aims of the study were to compare these two standard-setting methods for a multiple-choice question examination and to estimate the test-retest and inter-rater reliability of the modified Angoff method. Methods The norm – reference method of standard -setting (mean minus 1 SD was applied to the 'raw' scores of 78 4th-year medical students on a multiple-choice examination (MCQ. Two panels of raters also set the standard using the modified Angoff method for the same multiple-choice question paper on two occasions (6 months apart. We compared the pass/fail rates derived from the norm reference and the Angoff methods and also assessed the test-retest and inter-rater reliability of the modified Angoff method. Results The pass rate with the norm-reference method was 85% (66/78 and that by the Angoff method was 100% (78 out of 78. The percentage agreement between Angoff method and norm-reference was 78% (95% CI 69% – 87%. The modified Angoff method had an inter-rater reliability of 0.81 – 0.82 and a test-retest reliability of 0.59–0.74. Conclusion There were significant differences in the outcomes of these two standard-setting methods, as shown by the difference in the proportion of candidates that passed and failed the assessment. The modified Angoff method was found to have good inter-rater reliability and moderate test-retest reliability.

Text-in-context: a method for extracting findings in mixed-methods mixed research synthesis studies.

Science.gov (United States)

Sandelowski, Margarete; Leeman, Jennifer; Knafl, Kathleen; Crandell, Jamie L

2013-06-01

Our purpose in this paper is to propose a new method for extracting findings from research reports included in mixed-methods mixed research synthesis studies. International initiatives in the domains of systematic review and evidence synthesis have been focused on broadening the conceptualization of evidence, increased methodological inclusiveness and the production of evidence syntheses that will be accessible to and usable by a wider range of consumers. Initiatives in the general mixed-methods research field have been focused on developing truly integrative approaches to data analysis and interpretation. The data extraction challenges described here were encountered, and the method proposed for addressing these challenges was developed, in the first year of the ongoing (2011-2016) study: Mixed-Methods Synthesis of Research on Childhood Chronic Conditions and Family. To preserve the text-in-context of findings in research reports, we describe a method whereby findings are transformed into portable statements that anchor results to relevant information about sample, source of information, time, comparative reference point, magnitude and significance and study-specific conceptions of phenomena. The data extraction method featured here was developed specifically to accommodate mixed-methods mixed research synthesis studies conducted in nursing and other health sciences, but reviewers might find it useful in other kinds of research synthesis studies. This data extraction method itself constitutes a type of integration to preserve the methodological context of findings when statements are read individually and in comparison to each other. © 2012 Blackwell Publishing Ltd.

Advanced scientific computational methods and their applications of nuclear technologies. (1) Overview of scientific computational methods, introduction of continuum simulation methods and their applications (1)

International Nuclear Information System (INIS)

Oka, Yoshiaki; Okuda, Hiroshi

2006-01-01

Scientific computational methods have advanced remarkably with the progress of nuclear development. They have played the role of weft connecting each realm of nuclear engineering and then an introductory course of advanced scientific computational methods and their applications to nuclear technologies were prepared in serial form. This is the first issue showing their overview and introduction of continuum simulation methods. Finite element method as their applications is also reviewed. (T. Tanaka)

Methods for computing color anaglyphs

Science.gov (United States)

McAllister, David F.; Zhou, Ya; Sullivan, Sophia

2010-02-01

A new computation technique is presented for calculating pixel colors in anaglyph images. The method depends upon knowing the RGB spectral distributions of the display device and the transmission functions of the filters in the viewing glasses. It requires the solution of a nonlinear least-squares program for each pixel in a stereo pair and is based on minimizing color distances in the CIEL*a*b* uniform color space. The method is compared with several techniques for computing anaglyphs including approximation in CIE space using the Euclidean and Uniform metrics, the Photoshop method and its variants, and a method proposed by Peter Wimmer. We also discuss the methods of desaturation and gamma correction for reducing retinal rivalry.

Approximation methods in probability theory

CERN Document Server

Čekanavičius, Vydas

2016-01-01

This book presents a wide range of well-known and less common methods used for estimating the accuracy of probabilistic approximations, including the Esseen type inversion formulas, the Stein method as well as the methods of convolutions and triangle function. Emphasising the correct usage of the methods presented, each step required for the proofs is examined in detail. As a result, this textbook provides valuable tools for proving approximation theorems. While Approximation Methods in Probability Theory will appeal to everyone interested in limit theorems of probability theory, the book is particularly aimed at graduate students who have completed a standard intermediate course in probability theory. Furthermore, experienced researchers wanting to enlarge their toolkit will also find this book useful.

77 FR 32632 - Ambient Air Monitoring Reference and Equivalent Methods: Designation of Three New Equivalent Methods

Science.gov (United States)

2012-06-01

... Methods: Designation of Three New Equivalent Methods AGENCY: Environmental Protection Agency. ACTION... accordance with 40 CFR Part 53, three new equivalent methods: One for measuring concentrations of nitrogen... INFORMATION: In accordance with regulations at 40 CFR Part 53, the EPA evaluates various methods for...

78 FR 67360 - Ambient Air Monitoring Reference and Equivalent Methods: Designation of Five New Equivalent Methods

Science.gov (United States)

2013-11-12

... Methods: Designation of Five New Equivalent Methods AGENCY: Office of Research and Development; Environmental Protection Agency (EPA). ACTION: Notice of the designation of five new equivalent methods for...) has designated, in accordance with 40 CFR Part 53, five new equivalent methods, one for measuring...

77 FR 60985 - Ambient Air Monitoring Reference and Equivalent Methods: Designation of Three New Equivalent Methods

Science.gov (United States)

2012-10-05

... Methods: Designation of Three New Equivalent Methods AGENCY: Environmental Protection Agency. ACTION: Notice of the designation of three new equivalent methods for monitoring ambient air quality. SUMMARY... equivalent methods, one for measuring concentrations of PM 2.5 , one for measuring concentrations of PM 10...

Multigrid methods III

CERN Document Server

Trottenberg, U; Third European Conference on Multigrid Methods

1991-01-01

These proceedings contain a selection of papers presented at the Third European Conference on Multigrid Methods which was held in Bonn on October 1-4, 1990. Following conferences in 1981 and 1985, a platform for the presentation of new Multigrid results was provided for a third time. Multigrid methods no longer have problems being accepted by numerical analysts and users of numerical methods; on the contrary, they have been further developed in such a successful way that they have penetrated a variety of new fields of application. The high number of 154 participants from 18 countries and 76 presented papers show the need to continue the series of the European Multigrid Conferences. The papers of this volume give a survey on the current Multigrid situation; in particular, they correspond to those fields where new developments can be observed. For example, se­ veral papers study the appropriate treatment of time dependent problems. Improvements can also be noticed in the Multigrid approach for semiconductor eq...

Assessment of Cultivation Method for Energy Beet Based on LCA Method

OpenAIRE

Zhang, Chunfeng; Liu, Feng; Zu, Yuangang; Meng, Qingying; Zhu, Baoguo; Wang, Nannan

2014-01-01

In order to establish a supply system for energy resource coupled with the environment, the production technology of sugar beets was explored as a biological energy source. The low-humic andosol as the experimental soil, the panting method was direct planting, and cultivation technique was minimum tillage direct planting method. The control was conventional tillage transplant and no tillage direct planting. The results demonstrated that data revealed that the energy cost of no tillage and a d...

Standard setting: comparison of two methods.

Science.gov (United States)

George, Sanju; Haque, M Sayeed; Oyebode, Femi

2006-09-14

The outcome of assessments is determined by the standard-setting method used. There is a wide range of standard-setting methods and the two used most extensively in undergraduate medical education in the UK are the norm-reference and the criterion-reference methods. The aims of the study were to compare these two standard-setting methods for a multiple-choice question examination and to estimate the test-retest and inter-rater reliability of the modified Angoff method. The norm-reference method of standard-setting (mean minus 1 SD) was applied to the 'raw' scores of 78 4th-year medical students on a multiple-choice examination (MCQ). Two panels of raters also set the standard using the modified Angoff method for the same multiple-choice question paper on two occasions (6 months apart). We compared the pass/fail rates derived from the norm reference and the Angoff methods and also assessed the test-retest and inter-rater reliability of the modified Angoff method. The pass rate with the norm-reference method was 85% (66/78) and that by the Angoff method was 100% (78 out of 78). The percentage agreement between Angoff method and norm-reference was 78% (95% CI 69% - 87%). The modified Angoff method had an inter-rater reliability of 0.81-0.82 and a test-retest reliability of 0.59-0.74. There were significant differences in the outcomes of these two standard-setting methods, as shown by the difference in the proportion of candidates that passed and failed the assessment. The modified Angoff method was found to have good inter-rater reliability and moderate test-retest reliability.

An improved EMD method for modal identification and a combined static-dynamic method for damage detection

Science.gov (United States)

Yang, Jinping; Li, Peizhen; Yang, Youfa; Xu, Dian

2018-04-01

Empirical mode decomposition (EMD) is a highly adaptable signal processing method. However, the EMD approach has certain drawbacks, including distortions from end effects and mode mixing. In the present study, these two problems are addressed using an end extension method based on the support vector regression machine (SVRM) and a modal decomposition method based on the characteristics of the Hilbert transform. The algorithm includes two steps: using the SVRM, the time series data are extended at both endpoints to reduce the end effects, and then, a modified EMD method using the characteristics of the Hilbert transform is performed on the resulting signal to reduce mode mixing. A new combined static-dynamic method for identifying structural damage is presented. This method combines the static and dynamic information in an equilibrium equation that can be solved using the Moore-Penrose generalized matrix inverse. The combination method uses the differences in displacements of the structure with and without damage and variations in the modal force vector. Tests on a four-story, steel-frame structure were conducted to obtain static and dynamic responses of the structure. The modal parameters are identified using data from the dynamic tests and improved EMD method. The new method is shown to be more accurate and effective than the traditional EMD method. Through tests with a shear-type test frame, the higher performance of the proposed static-dynamic damage detection approach, which can detect both single and multiple damage locations and the degree of the damage, is demonstrated. For structures with multiple damage, the combined approach is more effective than either the static or dynamic method. The proposed EMD method and static-dynamic damage detection method offer improved modal identification and damage detection, respectively, in structures.

Methods for data classification

Science.gov (United States)

Garrity, George [Okemos, MI; Lilburn, Timothy G [Front Royal, VA

2011-10-11

The present invention provides methods for classifying data and uncovering and correcting annotation errors. In particular, the present invention provides a self-organizing, self-correcting algorithm for use in classifying data. Additionally, the present invention provides a method for classifying biological taxa.

Comparison of microstickies measurement methods. Part I, sample preparation and measurement methods