Tractor Safety. Unit A-9.

Science.gov (United States)

Luft, Vernon D.; Backlund, Paul

This document is a teacher's guide for a unit in tractor and machinery safety for college freshmen. It is intended to be used for 10 hours of instruction for freshmen who are intending to work on or around machinery. Safety hazards directly and indirectly related to many types of machinery are covered in addition to tractors. The objectives of the…

PROBLEMS OF FORMATION OF RUSSIAN INNOVATIVE AGRICULTURAL TRACTORS FLEET

Directory of Open Access Journals (Sweden)

V. M. Kryazhkov

2015-01-01

Full Text Available Formation of tractors park and its perspective development are carried out on the basis of realization and improvement of the scientifically based types range constructed on a traction classification sign which conforms to requirements of agricultural production when performing two main conditions: full meeting the requirements for various standard sizes of tractors applicable to conditions of the corresponding zones of Russia and continuous reproduction and development of tractor fleet, both by quantity of efficient machinery and its structure. The developed types range practically runs the gamut of organizational and economic and climatic conditions, and also all range of forms of the organizations using machinery, beginning from individual consumers, small and large rent and contract collectives and finishing large-scale enterprises and their associations. Federal Service of State Statistics (Rosstat information about a steady tendency of fleet reduction was used for studying of regularities of development of tractor fleet. This information was added by analytical synthesis of data about the annual brand purchases in the Russian market of agricultural tractors. The developed database shows a share of the tractors in fleets of agricultural organizations, which are used over depreciation term, and also minimum necessary number of new machines introduction for formation of volume of tractors with limit age and the total quantity of tractors necessary for minimization of set of expenses. It was established that it is possible to estimate visually the developed quantitative and age structure of tractors fleet and to predict its development on prospect by worked out database representing set of annual tractors brand lines purchasing.

Ergonomic assessment of some commonly used tractors in Iran

Directory of Open Access Journals (Sweden)

M. A Rostami

2015-09-01

Full Text Available Introduction: Different models of tractors have been imported from foreign countries or assembled in Iran for many years. Consistency of foreign manufactured products with native specifications and the improvement of locally manufactured tractors are important problems that must be considered. Moreover, tractor dimensions, sitting space and some other important factors such as the ability of Iranian users to operate them must be taken into consideration. In this study, we surveyed the proper proportion of tractors dimension, location of control tools and driver’s work space, with Iranian users’ anthropometric data of drivers from five provinces. Human factors are of paramount importance in developing farm machinery given that these machines will often be operated by persons with minimum skills. Therefore, farm machinery should be made simple to operate and as free from hazards as possible. Materials and methods: Firstly, the anthropometric data for 250 users 20-60 years old was calculated. The drivers were selected randomly. Then the specifications of 4 tractors including: Ferguson 285, Ferguson 399, Valtra and New Holland were compared with the anthropometric data of user in 5th and 95th percentile value and their adaptation was studied. Anthropometric Data of subjects consisted of: standing height, full hand length, popliteal length, seat pan width, seat pan depth, elbow height, seat back support height, hand pan width, hand grip and full-leg length. Getting on the tractor is the first contact of an operator with a tractor. In assessing the suitability of the provision made for getting on the tractor, an experiment was arranged in which operators tried to get on 3 tractors. The mode of getting on the tractors, the agony on the operator’s face, the muscular reactions and individual opinion on the difficulties or comfort while undertaking the task were observed and recorded. The specifications of tractors compared with Anthropometric Data

Design and implementation of a GPS guidance system for agricultural tractors using augmented reality technology.

Science.gov (United States)

Santana-Fernández, Javier; Gómez-Gil, Jaime; del-Pozo-San-Cirilo, Laura

2010-01-01

Current commercial tractor guidance systems present to the driver information to perform agricultural tasks in the best way. This information generally includes a treated zones map referenced to the tractor's position. Unlike actual guidance systems where the tractor driver must mentally associate treated zone maps and the plot layout, this paper presents a guidance system that using Augmented Reality (AR) technology, allows the tractor driver to see the real plot though eye monitor glasses with the treated zones in a different color. The paper includes a description of the system hardware and software, a real test done with image captures seen by the tractor driver, and a discussion predicting that the historical evolution of guidance systems could involve the use of AR technology in the agricultural guidance and monitoring systems.

The Influence of Tractor-Seat Height above the Ground on Lateral Vibrations

Directory of Open Access Journals (Sweden)

Jaime Gomez-Gil

2014-10-01

Full Text Available Farmers experience whole-body vibrations when they drive tractors. Among the various factors that influence the vibrations to which the driver is exposed are terrain roughness, tractor speed, tire type and pressure, rear axle width, and tractor seat height above the ground. In this paper the influence of tractor seat height above the ground on the lateral vibrations to which the tractor driver is exposed is studied by means of a geometrical and an experimental analysis. Both analyses show that: (i lateral vibrations experienced by a tractor driver increase linearly with tractor-seat height above the ground; (ii lateral vibrations to which the tractor driver is exposed can equal or exceed vertical vibrations; (iii in medium-size tractors, a feasible 30 cm reduction in the height of the tractor seat, which represents only 15% of its current height, will reduce the lateral vibrations by around 20%; and (iv vertical vibrations are scarcely influenced by tractor-seat height above the ground. The results suggest that manufacturers could increase the comfort of tractors by lowering tractor-seat height above the ground, which will reduce lateral vibrations.

IMPROVEMENT OF ROAD-HOLDING ABILITY FOR “BELARUS” TRACTORS

Directory of Open Access Journals (Sweden)

V. P. Boikov

2016-01-01

Full Text Available Introduction of new efficient braking systems for energy-packed tractors is of great importance for agricultural production. Foreign tractor manufacturing companies are implementing brake systems and in addition to their main function they fulfil function for holding of the given driving direction. The paper considers achievements in the field of electronic systems for tractor road-holding ability. A diagram on proportion of high-power tractors in total export volume of tractors and machinery manufactured in Belarus in the period of 2007–2010 has been drawn in the paper. The paper also proposes a comparative diagram on tractor speeds of international manufacturers which can serve as indicators of speed and road-holding ability of tractors with special electronic systems and without them. The paper contains an analysis of various braking mechanisms of planetary gears and detailed description of their design. A scheme of a laboratory facility for investigation of planetary gear usage as a breaking mechanism while changing conditions of jamming has been presented in the paper. The paper provides description on graph dependencies of current strength and voltage on as a function of the braking torque which is applied to a planetary gear. Nowadays energy-packed “Belarus”-tractors of Class 5 do not have a separate braking for each of four wheels. Therefore, it is proposed to use planetary gearbox of the rear-axle drive being available in every wheel as the basis of a service brake with the purpose to implement the described design. Using such scheme it is possible to execute an introduction of electronic systems for road-holding ability. A generalized scheme of an electronic system for tractor road-holding ability which can ensure separate breaking of all tractor wheels has been drawn out on the basis of the existing automotive electronic systems.

Involving fathers in teaching youth about farm tractor seatbelt safety--a randomized control study.

Science.gov (United States)

Jinnah, Hamida Amirali; Stoneman, Zolinda; Rains, Glen

2014-03-01

Farm youth continue to experience high rates of injury and deaths as a result of agricultural activities. Farm machinery, especially tractors, is the most common cause of casualties to youth. A Roll-Over Protection Structure (ROPS) along with a fastened seatbelt can prevent almost all injuries and fatalities from tractor overturns. Despite this knowledge, the use of seatbelts by farmers on ROPS tractors remains low. This study treats farm safety as a family issue and builds on the central role of parents as teachers and role models of farm safety for youth. This research study used a longitudinal, repeated-measures, randomized-control design in which youth 10-19 years of age were randomly assigned to either of two intervention groups (parent-led group and staff-led group) or the control group. Fathers in the parent-led group were less likely to operate ROPS tractors without a seatbelt compared with other groups. They were more likely to have communicated with youth about the importance of wearing seatbelts on ROPS tractors. Consequently, youth in the parent-led group were less likely to operate a ROPS tractor without a seatbelt than the control group at post-test. This randomized control trial supports the effectiveness of a home-based, father-led farm safety intervention as a promising strategy for reducing youth as well as father-unsafe behaviors (related to tractor seatbelts) on the farm. This intervention appealed to fathers' strong motivation to practice tractor safety for the sake of their youth. Involving fathers helped change both father as well as youth unsafe tractor-seatbelt behaviors. Copyright © 2014 Society for Adolescent Health and Medicine. Published by Elsevier Inc. All rights reserved.

Identifying and prioritizing customer requirements from tractor production by QFD method

Directory of Open Access Journals (Sweden)

H Taghizadeh

2017-05-01

and theoretical bases of this study have been collected with research paper tab and the research data has been collected through four researcher-made questionnaires and interview tools. The questionnaire Type 1, used for determining the most important demands and needs of customers based on five choices Likert scale. The questionnaire Type 2 was for gathering data requirements to hierarchical AHP method, and the questionnaire Type 3 was for doing some evaluation about organization's present situation related with competitor's situation based on customer's demands and needs; and the questionnaire Type 4 had been implemented for finding technical requirement weights respect to customer's demands and needs. The reliability of the type 1, 3 and 4 questionnaires determined by Chronbach's Alpha method; after gathering required data for mentioned statistical test, these questionnaires' reliability rates are obtained: 0.768, 0.784 and 0.793, respectively. As well as, the validity of the questionnaires has been examined with content validity method. In this research, for analyzing the gathered data, while taking into account the different stages of QFD method, t- student statistical test was used for identifing the needs and demands of customers, and AHP was used for determining the priority of needs and demands of customers. Results and Discussion The results of one sample t-test for identifying the customer’s most important demands and needs showed that the factors such as: producing low price tractor, the quality of used auto-parts, sustainability and long-lasting the final production (production life and durability, comfort and peace during work, creating operator cabin, easy access to spare components, the amount of fuel consumption, warranty and maintenance, easy access to official repair stations, technical experts and suitable auto-parts, fast respond of brake system during braking and smooth moving identified the important demands and needs of customers. The results

Filtration Systems Design for Universal Oils in Agricultural Tractors

Directory of Open Access Journals (Sweden)

R. Majdan

2017-12-01

Full Text Available Three filtration systems using the tractor hydraulic circuit were proposed and verified during the tractors operation. Using the tractor-implement hydraulic system and filter body with accessories the universally useful filtration systems were designed. The designed filtration systems are the second stage of universal oil filtration whereas the first stage is the standard tractor filter. The decrease in the content of iron reached the values 25.53 %, 32.95 % and 41.55 % and the average decrease in oil contamination characterized by average value of decrease in content of iron, copper and silicium reached values 24.3 %, 24.7 % and 35.53 % in dependence on the filtration system and an oil contamination level. The decrease in contamination level verified the ability of designed filtration systems for agricultural tractors.

ROBUST CONTROL OF OSCILLATIONS IN AGRICULTURAL TRACTORS

DEFF Research Database (Denmark)

Andersen, T. O.; Hansen, M. R.; Conrad, Finn

2003-01-01

for agricultural tractors equiped with hicth and implements. A control strategy is developed to make the implement counteract the movement of the tractor and thereby reducing the pitching oscillation. The control strategy is based on a linear plant model with constant or slowly varying parameters. Using...

System automated for evaluation of the consuption of biodiesel in agricola tractor

OpenAIRE

Ivair Marchetti

2006-01-01

This work had as objective the assembly of a system automated for evaluation of the consumption of fuel in agricultural tractors, in the utilization of biodiesel in diverse mixtures diesel/biodiesel for the accomplishment of testing, without the utilization of the tank of the tractor. The system was projected and mounted on the UNIOESTE Cascavel - PR in partnership with the UTFPR Medianeira â PR. The system is composed for two auxiliary tanks confectioned in stainless steel ...

An agricultural tractor test with different proportions of biodiesel; Ensaio de um trator agricola com diferentes proporcoes de biodiesel

Energy Technology Data Exchange (ETDEWEB)

Silva, Breno Alves; Castro, Douglas Lourenco de Souza; Volpato, Carlos Eduardo Silva; Barbosa, Jackson Antonio [Universidade Federal de Lavras (UFLA), MG (Brazil)

2009-07-01

The globalization of the economy bring as consequence the entry of new equipment and machinery highly competitive in terms of cost. This is the same reality of the Brazilian agricultural sector which today has new options for machines and implements very interesting from the standpoint of cost of acquisition. However, such equipment, due to its recent inclusion in the market, yet do not have parameters that relate to reliability. This work aimed to demonstrated the dynamometer test of an agricultural tractor, recently introduced in the market, to obtain their torque curves and specific fuel consumption using the fuel B{sub 2}, B{sub 5}, B{sub 2}0 and B{sub 1}00. The results showed that the tractor had satisfactory performance for all motor fuels, presenting the best performance with the use of B{sub 5} fuel. (author)

Design and Implementation of a GPS Guidance System for Agricultural Tractors Using Augmented Reality Technology

Directory of Open Access Journals (Sweden)

Laura del-Pozo-San-Cirilo

2010-11-01

Full Text Available Current commercial tractor guidance systems present to the driver information to perform agricultural tasks in the best way. This information generally includes a treated zones map referenced to the tractor’s position. Unlike actual guidance systems where the tractor driver must mentally associate treated zone maps and the plot layout, this paper presents a guidance system that using Augmented Reality (AR technology, allows the tractor driver to see the real plot though eye monitor glasses with the treated zones in a different color. The paper includes a description of the system hardware and software, a real test done with image captures seen by the tractor driver, and a discussion predicting that the historical evolution of guidance systems could involve the use of AR technology in the agricultural guidance and monitoring systems.

Realization of compact tractor beams using acoustic delay-lines

Science.gov (United States)

Marzo, A.; Ghobrial, A.; Cox, L.; Caleap, M.; Croxford, A.; Drinkwater, B. W.

2017-01-01

A method for generating stable ultrasonic levitation of physical matter in air using single beams (also known as tractor beams) is demonstrated. The method encodes the required phase modulation in passive unit cells into which the ultrasonic sources are mounted. These unit cells use waveguides such as straight and coiled tubes to act as delay-lines. It is shown that a static tractor beam can be generated using a single electrical driving signal, and a tractor beam with one-dimensional movement along the propagation direction can be created with two signals. Acoustic tractor beams capable of holding millimeter-sized polymer particles of density 1.25 g/cm3 and fruit-flies (Drosophila) are demonstrated. Based on these design concepts, we show that portable tractor beams can be constructed with simple components that are readily available and easily assembled, enabling applications in industrial contactless manipulation and biophysics.

Optical tractor Bessel polarized beams

International Nuclear Information System (INIS)

Mitri, F.G.; Li, R.X.; Guo, L.X.; Ding, C.Y.

2017-01-01

Axial and transverse radiation force cross-sections of optical tractor Bessel polarized beams are theoretically investigated for a dielectric sphere with particular emphasis on the beam topological charge (or order), half-cone angle and polarization. The angular spectrum decomposition method (ASDM) is used to derive the non-paraxial electromagnetic (EM) field components of the Bessel beams. The multipole expansion method using vector spherical harmonics is utilized and appropriate beam-shape coefficients are derived in order to compute the radiation force cross-sections. The analysis has no limitation to a particular range of frequencies such that the Rayleigh, Mie or geometrical optics regimes can all be considered effectively using the present rigorous formalism. The focus of this investigation is to identify some of the tractor beam conditions so as to achieve retrograde motion of a dielectric sphere located arbitrarily in space. Numerical computations for the axial and transverse radiation force cross-sections are presented for linear, right-circular, radial, azimuthal and mixed polarizations of the individual plane waves forming the Bessel beams of zeroth- and first-order (with positive or negative helicity), respectively. As the sphere shifts off the beam's axis, the axial pulling (tractor) force is weakened. Moreover, the transverse radiation force cross-section field changes with the sphere's size factor ka (where k is the wavenumber and a is the sphere radius). Both stable and unstable equilibrium regions around the beam's axis are found, depending on the choice of ka and the half-cone angle α_0. These results are particularly important in the development of emergent technologies for the photophoretic assembly of optically-engineered (meta)materials with designed properties using optical tractor (vortex) beams, particle manipulation, levitation and positioning, and other applications. - Highlights: • Optical tractor Bessel polarized beams are

49 CFR 399.207 - Truck and truck-tractor access requirements.

Science.gov (United States)

2010-10-01

.... Exception. If air and electrical connections necessary to couple or uncouple a truck-tractor from a trailer... 49 Transportation 5 2010-10-01 2010-10-01 false Truck and truck-tractor access requirements. 399... Vehicles § 399.207 Truck and truck-tractor access requirements. (a) General rule. Any person entering or...

The evaluations regarding tractor usage in farms in Eskişehir province

Directory of Open Access Journals (Sweden)

Neşe ALTINTAŞ

2014-12-01

Full Text Available Farmers’ demand of tractor, buying attitudes and satisfaction of tractor use are very important determinant for the decision makers in the sector. It is necessary that to be research of conditions of tractor use in farms and to be achieved certain data for efficient use of tractor in agricultural production. The survey forms which were prepared for this purpose have been filled in 2013 with 122 farmers which tractor owner and have been evaluated.

An experimental investigation of exhaust emission from agricultural tractors

Energy Technology Data Exchange (ETDEWEB)

Gholami, Rashid; Rabbani, Hekmat; Lorestani, Ali Nejat; Javadikia, Payam; Jaliliantabar, Farzad [Mechanics of Agricultural Machinery Department, Razi University of Kermanshah (Iran, Islamic Republic of)

2013-07-01

Agricultural machinery is an important source of emission of air pollutant in rural locations. Emissions of a specific tractor engine mainly depend on engine speed. Various driving methods and use of implements with different work capacities can affect the engine load. This study deals with the effects of types of tractors and operation conditions on engine emission. In this study two types of agricultural tractors (MF285 and U650) and some tillage implements such as centrifugal type spreader, boom type sprayer and rotary tiller were employed. Some of the exhausted gases from both tractors in each condition were measured such as, hydrocarbon (HC), carbon monoxide (CO), carbon dioxide (CO2), oxygen (O2) and nitrogen oxide (NO). Engine oil temperature was measured at every step for both types of tractors. Difference between steady-state condition and operation conditions was evaluated. The results showed all exhaust gases that measured and engine oil temperature at every operation conditions are higher than steady-state condition. A general conclusion of the work was that, using various implements and employing different types of tractors effect on engine emissions. The results of variance analysis showed all exhausted gases had a significant relationship with types of implements used at 1%. Also, all exhausted gases except CO had a significant relationship with types of tractors. A further conclusion was that NO emission increased as engine oil temperature increased. The final conclusion was about the difference between MF285 and U650; using U650 at operation conditions is better than MF285 in terms of pollution.

Tests of Nacelle-Propeller Combinations in Various Positions with Reference to Wings V : Clark Y Biplane Cellule - NACA Cowled Nacelle - Tractor Propeller

Science.gov (United States)

Valentine, E Floyd

1935-01-01

This report is the fifth of a series giving the results obtained from wind tunnel tests on the interference drag and propulsive efficiency of nacelle-propeller-wing combinations. This report gives results of tests of an NACA cowled air-cooled engine nacelle with tractor propeller located in 12 positions with reference to a Clark Y biplane cellule.

Emission and operating performance of a biomethane tractor with dual fuel engine

International Nuclear Information System (INIS)

Mautner, Sebastian; Emberger, Peter; Thuneke, Klaus; Remmele, Edgar

2016-01-01

The use of biomethane as fuel for agricultural machinery with dual fuel technology is contributing to climate protection and ensures safe fuel supply. So far, hardly any documented operational experiences are known. The aim of the project, funded by the Bavarian Ministry of Economic Affairs and Media, Energy and Technology, was to investigate practicability for daily use and the emission behaviour of a Valtra N101 prototype tractor (exhaust stage IIIA). The retrofitted dual-fuel technology of the former conventional diesel tractor simultaneously uses biomethane or natural gas and diesel as ignition fuel. During the field test over 590 working hours, the tractor showed overall high reliability. On average the operating range in dual-fuel mode with one complete filling of the gas tanks was about 11.5 hours. On the tractor test bench a significant improvement of the exhaust emissions could be observed, since the gas ECU had been optimized and changed by the manufacturer. For dual-fuel operation, nitrogen oxides (NO x ) are lower, whereas carbon monoxide (CO), hydrocarbons (HC) and particulate matter emissions (PM) are higher compared to solely diesel operation. In particular, HC emissions exceed the proposed limiting value, submitted by the European Commission. This is due to incomplete gas combustion and insufficient conversion by the exhaust after-treatment-system (methane slip). A big potential for optimization is expected by adjusting the operating point-specific gasdiesel ratio and improving the exhaust gas aftertreatment system.

A spatial cluster analysis of tractor overturns in Kentucky from 1960 to 2002.

Directory of Open Access Journals (Sweden)

Daniel M Saman

Full Text Available Agricultural tractor overturns without rollover protective structures are the leading cause of farm fatalities in the United States. To our knowledge, no studies have incorporated the spatial scan statistic in identifying high-risk areas for tractor overturns. The aim of this study was to determine whether tractor overturns cluster in certain parts of Kentucky and identify factors associated with tractor overturns.A spatial statistical analysis using Kulldorff's spatial scan statistic was performed to identify county clusters at greatest risk for tractor overturns. A regression analysis was then performed to identify factors associated with tractor overturns.The spatial analysis revealed a cluster of higher than expected tractor overturns in four counties in northern Kentucky (RR = 2.55 and 10 counties in eastern Kentucky (RR = 1.97. Higher rates of tractor overturns were associated with steeper average percent slope of pasture land by county (p = 0.0002 and a greater percent of total tractors with less than 40 horsepower by county (p<0.0001.This study reveals that geographic hotspots of tractor overturns exist in Kentucky and identifies factors associated with overturns. This study provides policymakers a guide to targeted county-level interventions (e.g., roll-over protective structures promotion interventions with the intention of reducing tractor overturns in the highest risk counties in Kentucky.

Costs of Tractor Ownership under Different Management Systems in ...

African Journals Online (AJOL)

Costs of Tractor Ownership under Different Management Systems in Nigeria. ... It requires high initial capital investment. ... making management plans and decisions especially in comparing different tractor types and models thereby assisting ...

30 CFR 77.409 - Shovels, draglines, and tractors.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Shovels, draglines, and tractors. 77.409... COAL MINES Safeguards for Mechanical Equipment § 77.409 Shovels, draglines, and tractors. (a) Shovels... the operator prior to starting operation. (b) Shovels and draglines shall be equipped with handrails...

Bifurcation of Lane Change and Control on Highway for Tractor-Semitrailer under Rainy Weather

Directory of Open Access Journals (Sweden)

Tao Peng

2017-01-01

Full Text Available A new method is proposed for analyzing the nonlinear dynamics and stability in lane changes on highways for tractor-semitrailer under rainy weather. Unlike most of the literature associated with a simulated linear dynamic model for tractor-semitrailers steady steering on dry road, a verified 5DOF mechanical model with nonlinear tire based on vehicle test was used in the lane change simulation on low adhesion coefficient road. According to Jacobian matrix eigenvalues of the vehicle model, bifurcations of steady steering and sinusoidal steering on highways under rainy weather were investigated using a numerical method. Furthermore, based on feedback linearization theory, taking the tractor yaw rate and joint angle as control objects, a feedback linearization controller combined with AFS and DYC was established. The numerical simulation results reveal that Hopf bifurcations are identified in steady and sinusoidal steering conditions, which translate into an oscillatory behavior leading to instability. And simulations of urgent step and single-lane change in high velocity show that the designed controller has good effects on eliminating bifurcations and improving lateral stability of tractor-semitrailer, during lane changing on highway under rainy weather. It is a valuable reference for safety design of tractor-semitrailers to improve the traffic safety with driver-vehicle-road closed-loop system.

A Kalman Filter Implementation for Precision Improvement in Low-Cost GPS Positioning of Tractors

Science.gov (United States)

Gomez-Gil, Jaime; Ruiz-Gonzalez, Ruben; Alonso-Garcia, Sergio; Gomez-Gil, Francisco Javier

2013-01-01

Low-cost GPS receivers provide geodetic positioning information using the NMEA protocol, usually with eight digits for latitude and nine digits for longitude. When these geodetic coordinates are converted into Cartesian coordinates, the positions fit in a quantization grid of some decimeters in size, the dimensions of which vary depending on the point of the terrestrial surface. The aim of this study is to reduce the quantization errors of some low-cost GPS receivers by using a Kalman filter. Kinematic tractor model equations were employed to particularize the filter, which was tuned by applying Monte Carlo techniques to eighteen straight trajectories, to select the covariance matrices that produced the lowest Root Mean Square Error in these trajectories. Filter performance was tested by using straight tractor paths, which were either simulated or real trajectories acquired by a GPS receiver. The results show that the filter can reduce the quantization error in distance by around 43%. Moreover, it reduces the standard deviation of the heading by 75%. Data suggest that the proposed filter can satisfactorily preprocess the low-cost GPS receiver data when used in an assistance guidance GPS system for tractors. It could also be useful to smooth tractor GPS trajectories that are sharpened when the tractor moves over rough terrain. PMID:24217355

Whole-Body Vibration in Farming: Background Document for Creating a Simplified Procedure to Determine Agricultural Tractor Vibration Comfort

Directory of Open Access Journals (Sweden)

Maurizio Cutini

2017-09-01

Full Text Available Operator exposure to high levels of whole-body vibration (WBV presents risks to health and safety and it is reported to worsen or even cause back injuries. Work activities resulting in operator exposure to whole-body vibration have a common onset in off-road work such as farming. Despite the wide variability of agricultural surface profiles, studies have shown that with changing soil profile and tractor speed, the accelerations resulting from ground input present similar spectral trends. While on the one hand such studies confirmed that tractor WBV emission levels are very dependent upon the nature of the operation performed, on the other, irrespective of the wide range of conditions characterizing agricultural operations, they led researchers to set up a possible and realistic simplification and standardization of tractor driver comfort testing activities. The studies presented herewith indicate the usefulness, and the possibility, of developing simplified procedures to determine agricultural tractor vibration comfort. The results obtained could be used effectively to compare tractors of the same category or a given tractor when equipped with different seats, suspension, tyres, etc.

Agricultural Tractor Safety on Public Roads and Farms.

Science.gov (United States)

Department of Transportation, Washington, DC.

This study investigated the extent, causes, and means of preventing agricultural tractor accidents. The report includes an estimate of annual tractor-related deaths, an identification of the primary causes of such accidents with consideration of the major hazards causing death or injury, and recommendations or means for preventing the occurrence…

Risk exposure to vibration and noise in the use of agricultural track-laying tractors

Directory of Open Access Journals (Sweden)

Mariangela Vallone

2016-09-01

Full Text Available Human exposure to mechanical vibration may represent a significant risk factor for exposed workers in the agricultural sector. Also, noise in agriculture is one of the risk factors to be taken into account in the evaluation of workers’ health and safety. One of the major sources of discomfort for the workers operating a tractors is the noise to which they are exposed during work. The aim of this study was to evaluate the risk of exposure to whole-body vibration for the operator driving track-laying tractors in vineyard orchard and the noise level. The experimental tests were performed with six different track-laying tractors coupled with the same rototilling machine. The results showed that the vibration values of track-laying tractors coupled to rototilling machine, referred to the 8-hour working day, were always higher than 0.5 m s -2 , the daily exposure action value established by Directive 2002/44/EC of the European Parliament. The daily noise exposure levels always exceeded the exposure limit value of 87 dB(A established by Directive 2003/10/EC of the European Parliament. The ANOVA repeated measures model showed that the factor ‘site’, namely, the soil characteristics, did not influence the vibration level on the X and Y-axes of the tractors measured, regardless of their age. In the Z-axis, the vibration level was enhanced as the soil structure increased. As tractor age increased, the influence of soil characteristics was less important. In term of the age of the tractor and the number of hours worked, it was possible to identify three risk classes, which were up to 3,000 hours worked and offered a low risk; from 3,000 – 6,000 hours worked with a medium risk, and over 6,000 hours with a high risk level.

Risk exposure to vibration and noise in the use of agricultural track-laying tractors.

Science.gov (United States)

Vallone, Mariangela; Bono, Filippa; Quendler, Elisabeth; Febo, Pierluigi; Catania, Pietro

2016-12-23

Human exposure to mechanical vibration may represent a significant risk factor for exposed workers in the agricultural sector. Also, noise in agriculture is one of the risk factors to be taken into account in the evaluation of workers' health and safety. One of the major sources of discomfort for the workers operating a tractors is the noise to which they are exposed during work. The aim of this study was to evaluate the risk of exposure to whole-body vibration for the operator driving track-laying tractors in vineyard orchard and the noise level. The experimental tests were performed with six different track-laying tractors coupled with the same rototilling machine. The results showed that the vibration values of track-laying tractors coupled to rototilling machine, referred to the 8-hour working day, were always higher than 0.5 m s -2 , the daily exposure action value established by Directive 2002/44/EC of the European Parliament. The daily noise exposure levels always exceeded the exposure limit value of 87 dB(A) established by Directive 2003/10/EC of the European Parliament. The ANOVA repeated measures model showed that the factor 'site', namely, the soil characteristics, did not influence the vibration level on the X and Y-axes of the tractors measured, regardless of their age. In the Z-axis, the vibration level was enhanced as the soil structure increased. As tractor age increased, the influence of soil characteristics was less important. In term of the age of the tractor and the number of hours worked, it was possible to identify three risk classes, which were up to 3,000 hours worked and offered a low risk; from 3,000 - 6,000 hours worked with a medium risk, and over 6,000 hours with a high risk level.

Social and Individual Influences on Tractor Operating Practices of Young Adult Agricultural Workers.

Science.gov (United States)

Rudolphi, Josie M; Campo, Shelly; Gerr, Fred; Rohlman, Diane S

2018-05-01

Tractor-related incidents are the leading cause of agricultural-related fatalities in the United States. Injuries from rollovers can be prevented by equipping tractors with rollover protective structures (ROPS, an engineering approach) and by using seatbelts (a behavior-based approach). While adult farmers report low seatbelt use and frequent use of tractors without ROPS, it is unknown whether the young adult population has adopted similar tractor driving practices. This study was designed to identify tractor operating practices among young adult agricultural workers and the influence of supervisors, peers, and parents on their safety behaviors. An online survey was conducted among college students enrolled in agricultural science classes in four Midwestern colleges and universities. Participants answered questions about their tractor operating practices, the influence of supervisors, peers, parents, and individual risk taking tendencies on their workplace practices. A tractor operation safety score was estimated from participants' responses. Linear regression was used to examine the association of these influences and the tractor operation safety score. Of the 193 respondents, most (78.8%) reported that they never or rarely wear a seatbelt when operating a tractor with a ROPS. Supervisory influences, such as being negatively evaluated by a supervisor, were found to be more strongly associated with tractor operating behaviors than peer or parent influence. Young adult agricultural workers frequently reported unsafe tractor operating behaviors. Supervisors were found to have the most influence over reported behaviors of young adult agricultural workers. Copyright © 2017 The Society for Adolescent Health and Medicine. Published by Elsevier Inc. All rights reserved.

Pulling cylindrical particles using a soft-nonparaxial tractor beam

DEFF Research Database (Denmark)

Novitsky, Andrey; Ding, Weiqiang; Wang, Maoyan

2017-01-01

In order to pull objects towards the light source a single tractor beam inevitably needs to be strongly nonparaxial. This stringent requirement makes such a tractor beam somewhat hypothetical. Here we reveal that the cylindrical shape of dielectric particles can effectively mitigate the nonparaxi......In order to pull objects towards the light source a single tractor beam inevitably needs to be strongly nonparaxial. This stringent requirement makes such a tractor beam somewhat hypothetical. Here we reveal that the cylindrical shape of dielectric particles can effectively mitigate...... the nonparaxiality requirements, reducing the incidence angle of the partial plane waves of the light beam down to 45 degrees and even to 30 degrees for respectively dipole and dipole-quadrupole objects. The optical pulling force attributed to the interaction of magnetic dipole and magnetic quadrupole moments...... and sorting of targeted particles....

Comparison between ISO 5008 and field whole body vibration tractor values

Directory of Open Access Journals (Sweden)

Roberto Deboli

2012-09-01

Full Text Available The exposure to whole body vibration (WBV of tractor drivers during field operations is a problem that has never been solved. WBV values are quite difficult to predict because of the high number of variables, such as mass and geometry of the vehicle, forward speed, tire pressure, type of ground, operation cycle, and environmental factors. The use of an artificial track is useful to limit the variability of some field parameters, such as the path followed, fluctuations in speed, weather, temperature, and soil conditions. For comparative purposes, these variables need to be maintained as constant as possible in order to obtain the most useful data. An analysis of the literature provoked the question: Is there a lower forward speed on artificial track that can generate the same vibration response on tractors working in the same field? In this paper, we analyze the available literature and provide some WBV values and frequency analysis of acceleration measured on agricultural tractors traveling on an artificial test track and on different types of ground.

Noise levels of a track-laying tractor during field operations in the vineyard

Directory of Open Access Journals (Sweden)

Pietro Catania

2013-09-01

Full Text Available Noise in agriculture is one of the risk factors to be taken into account in the assessment of the health and safety of workers; in particular, it is known that the tractor is a source of high noise. The Italian Low Decree 81/2008 defined the requirements for assessing and managing noise risk identifying a number of procedures to be adopted at different noise levels to limit workers exposure. This paper concerns the analysis of the noise risk arising from the use of a tracklaying tractor during field operations carried out in the vineyard. The objective of this study was to evaluate the noise level that comes close to the ear of the operator driving the tractor measuring the values of equivalent sound level (Leq(A and peak sound pressure (LCpk. We considered four options related to the same tractor coupled with the following tools to perform some farming operations: rototilling, chisel plough, flail mowers and vibro farmer. We considered three test conditions: T1 in flat (slope 0%, T2 uphill and T3 downhill (both 30% slope. The instrument used for the measurements is a precision integrating portable sound level meter, class 1, model HD2110L by Delta OHM, Italy. Each survey lasted 2 minutes, with an interval of measurement equal to 0.5 s. The tests were performed in compliance with the standards ISO 9612 and ISO 9432. The results show that the measured sound levels exceed the limits allowed by the regulations in almost all the test conditions; values exceeding the threshold limit of 80 dB(A were recorded coming up to a maximum value of 92.8 dB(A for flail mowers in test T1. When limits imposed by the regulations are exceeded, the operator is obliged to wear the appropriate Personal Protective Equipment.

Optical tractor Bessel polarized beams

Science.gov (United States)

Mitri, F. G.; Li, R. X.; Guo, L. X.; Ding, C. Y.

2017-01-01

Axial and transverse radiation force cross-sections of optical tractor Bessel polarized beams are theoretically investigated for a dielectric sphere with particular emphasis on the beam topological charge (or order), half-cone angle and polarization. The angular spectrum decomposition method (ASDM) is used to derive the non-paraxial electromagnetic (EM) field components of the Bessel beams. The multipole expansion method using vector spherical harmonics is utilized and appropriate beam-shape coefficients are derived in order to compute the radiation force cross-sections. The analysis has no limitation to a particular range of frequencies such that the Rayleigh, Mie or geometrical optics regimes can all be considered effectively using the present rigorous formalism. The focus of this investigation is to identify some of the tractor beam conditions so as to achieve retrograde motion of a dielectric sphere located arbitrarily in space. Numerical computations for the axial and transverse radiation force cross-sections are presented for linear, right-circular, radial, azimuthal and mixed polarizations of the individual plane waves forming the Bessel beams of zeroth- and first-order (with positive or negative helicity), respectively. As the sphere shifts off the beam's axis, the axial pulling (tractor) force is weakened. Moreover, the transverse radiation force cross-section field changes with the sphere's size factor ka (where k is the wavenumber and a is the sphere radius). Both stable and unstable equilibrium regions around the beam's axis are found, depending on the choice of ka and the half-cone angle α0. These results are particularly important in the development of emergent technologies for the photophoretic assembly of optically-engineered (meta)materials with designed properties using optical tractor (vortex) beams, particle manipulation, levitation and positioning, and other applications.

Mechanical Design of Downhole Tractor Based on Two-Way Self-locking Mechanism

Science.gov (United States)

Fang, Delei; Shang, Jianzhong; Luo, Zirong; Wu, Guoheng; Liu, Yiying

2018-03-01

Based on the technology of horizontal well tractor, a kind of downhole tractor was developed which can realize Two-Way self-locking function. Aiming at the needs of horizontal well logging to realize the target of small size, high traction and high reliability, the tractor selects unique heart-shaped CAM as the locking mechanism. The motion principle of telescopic downhole tractor, the design of mechanical structure and locking principle of the locking mechanism are all analyzed. The mathematical expressions of traction are obtained by mechanical analysis of parallel support rod in the locking mechanism. The force analysis and contour design of the heart-shaped CAM are performed, which can lay the foundation for the development of tractor prototype.

EFFICIENCY ANALYSIS OF ENERGY ACCUMULATING MECHANISM FOR TRACTOR WITH ELECTROMECHANICAL TRANSMISSION

Directory of Open Access Journals (Sweden)

Ch. I. Zhdanovich

2017-01-01

Full Text Available Dependence of tractor wheel torque on theoretical tractor motion speed has been used for comparison of tractor operation with electromechanical transmission with installation of energy accumulating mechanism and without its installation. In this case a traction asynchronous electric motor is operating under nominal and limit conditions. The paper also considers dependence diagrams of actual input power for the traction asynchronous electric motor and its losses due to theoretical tractor motion speed. Tractor wheel torque is limited during the operation of the traction asynchronous electric motor with energy accumulating mechanisms by the following factors: maximum electric motor torque at the given frequency of supply voltage; maximum value of internal combustion motor output which can be transferred to the traction asynchronous electric motor; grip of the wheels. During the operation of the traction asynchronous electric motor with energy accumulating mechanisms there is a possibility for short power consumption without regard to the second limitation because it is possible to use power not only of internal combustion motor but also the power which is stored in the energy accumulating mechanisms. Comparison of characteristics has been made when a tractor is operating at high gear and when it is operating at all gears (that is two gears. Operation of the 5th class tractors has been analyzed for all possible cases (operation with energy accumulating mechanisms and without the mechanisms while being operated at all gears and various types of work: tilling, sowing, cultivation, bulldozing work, transport mode. In this case equipment has been used which is aggregated with the 5th class tractor. 

Parameters for assay in engines of agricultural tractor for biofuel use

Energy Technology Data Exchange (ETDEWEB)

Lopes, Reny Adilmar Prestes; Meyer, Wagner [Universidade Estadual de Maringa (DEA/CCA/UEM), Cidade Gaucha, PR (Brazil). Centro de Ciencias Agrarias. Dept. de Engenharia Agricola], E-mail: raplopes@uem.br; Pinheiro Neto, Raimundo; Pinheiro, Andreia Cristina [Universidade Estadual de Maringa (DAG/CCA/UEM), PR (Brazil). Centro de Ciencias Agrarias. Dept. de Agronomia; Laurindo, Jose Carlos [Instituto de Tecnologia do Parana (CERBIO/TECPAR), Curitiba, PR (Brazil). Centro Brasileiro de Referencia em Biocombustiveis; Biazzono, Sergio Luis [Instituto de Tecnologia do Parana (TECPAR), Maringa, PR (Brazil). Inspecao Veicular

2008-07-01

The use of biofuel in tractors of diesel engines and agricultural harvester, in the operations of preparation of soil and harvest, is a good option of economy for the agriculturist. For a good performance of the machine, regulation and maintenance is necessary. This paper has the objective to prepare the agricultural tractors engine for the use of biofuel. The experiment was carried through State University of Maringa. One used for the assays three Massey Ferguson tractors engines. The smoke assays and opacity had shown that both the tractors had presented problems of regulations. The assays demonstrate the necessity of periodically to carry through the correct maintenance of the machines, as well as the training of the operators. The regulations allow adjusting the engines of the tractors to operate in situations recommended for the manufacturers. The regulations allow the correct functioning and better accompaniment of the useful life of the engine using biofuel in operations of soil preparation, sowing and harvest. (author)

Pulsed Nonlinear Automatic Control System for Guidance of a Caterpillar Tractor Unit in Vineyards

Directory of Open Access Journals (Sweden)

Sit M.L.

2018-04-01

Full Text Available The automatic guidance systems of tractors for soil cultivation in vineyards have attracted the attention of researchers since the second half of the twentieth century. The purpose of this paper is to investigate the driving quality of an automatic guidance system (AGS for a caterpillar tractor unit (CTU consisting of a crawler tractor and a vineyard plow and having the orientation system by grapes stamps. Compared with the known works (in which GPS, LIDAR, and video cameras are used for orientation, the proposed system is the least expensive. For this, the existence of stability of the AGS as a whole in the range of operating speeds of the unit was proved. The dynamic model of the vineyard plow was verified on a three-point hitching system of the tractor, field tests of the AGS were carried out, which confirmed the results of theoretical studies, and suggested directions for further research. The shape and parameters of the modulation characteristic (MC of the pulse-width modulator (PWM of the AGS control system, the rational values of the hydraulic drive speeds of the sequential control mechanism of the clutch of the turn and the crawler tractor belt brake, were established, depending on the slope angle and the speed of the unit, ensuring agrotechnical requirements for driving. New solutions, in comparison with the known ones, are the ways of forming the MC of PWM using a new design probe and the associated driver MC of PWM.

Quantum coherent tractor beam effect for atoms trapped near a nanowaveguide

Science.gov (United States)

Sadgrove, Mark; Wimberger, Sandro; Nic Chormaic, Síle

2016-01-01

We propose several schemes to realize a tractor beam effect for ultracold atoms in the vicinity of a few-mode nanowaveguide. Atoms trapped near the waveguide are transported in a direction opposite to the guided mode propagation direction. We analyse three specific examples for ultracold 23Na atoms trapped near a specific nanowaveguide (i.e. an optical nanofibre): (i) a conveyor belt-type tractor beam effect, (ii) an accelerator tractor beam effect, and (iii) a quantum coherent tractor beam effect, all of which can effectively pull atoms along the nanofibre toward the light source. This technique provides a new tool for controlling the motion of particles near nanowaveguides with potential applications in the study of particle transport and binding as well as atom interferometry. PMID:27440516

Characteristics of paddy operations with biodiesel fuelled tractor

Energy Technology Data Exchange (ETDEWEB)

Kim, Y.; Park, S.H.; Kim, C.K.; Im, D.H.; Kim, H.J.; Chung, S.C. [National Academy of Agricultural Science, Seodundong, Suwon (Korea, Democratic People' s Republic of); Kim, S.S. [Daedong Industrial Co., Chang Nyong-Kun, Kyungnam (Korea, Democratic People' s Republic of)

2010-07-01

This paper reported on a study in which biofuels were tested for their power and competitiveness in various paddy operations, such as plowing and rotary tilling of paddy fields. The study considered the use of diesel fuel as well as 20 per cent biodiesel (BD20) and 100 per cent biodiesel (BD100) as an alternative fuel for tractors. Ignition problems or abrupt stopping were not monitored during operations of plowing, rotary tilling and travelling on the road. According to tractor power take-off (PTO) test codes, there was no considerable power difference between the 3 fuels. However, fuel consumption rates were quite different between the biodiesels and diesel fuel in the paddy works. Fuel consumption increased when biodiesel content increased. Approximately 35 to 40 per cent more fuel was needed for rotary tilling operations than plowing operations. Within the operations, the maximum difference occurred during the rotary tilling of wet paddy fields. This difference was as high as 20 per cent , between BD100 and diesel fuel. In terms of exhaust gases, more carbon dioxide was discharged from diesel fuel than biodiesels, but more nitrous oxide was discharged with biodiesels. It was difficult to differentiate quantities of carbon monoxide between the 3 different fuels.

Action Learning: A New Method to Increase Tractor Rollover Protective Structure (ROPS) Adoption

Science.gov (United States)

Biddle, Elyce Anne; Keane, Paul R.

2016-01-01

Action Learning is a problem-solving process that is used in various industries to address difficult problems. This project applied Action Learning to a leading problem in agricultural safety. Tractor overturns are the leading cause of fatal injury to farmworkers. This cause of injury is preventable using rollover protective structures (ROPS), protective equipment that functions as a roll bar structure to protect the operator in the event of an overturn. For agricultural tractors manufactured after 1976 and employee operated, Occupational Safety and Health Administration (OSHA) regulation requires employers to equip them with ROPS and seat belts. By the mid-1980s, US tractor manufacturers began adding ROPS on all farm tractors over 20 horsepower sold in the United States (http://www.nasdonline.org/document/113/d001656/rollover-protection-for-farm-tractor-operators.html). However, many older tractors remain in use without ROPS, putting tractor operators at continued risk for traumatic injury and fatality. For many older tractor models ROPS are available for retrofit, but for a variety of reasons, tractor owners have not chosen to retrofit those ROPS. The National Institute for Occupational Safety and Health (NIOSH) attempted various means to ameliorate this occupational safety risk, including the manufacture of a low-cost ROPS for self-assembly. Other approaches address barriers to adoption. An Action Learning approach to increasing adoption of ROPS was followed in Virginia and New York, with mixed results. Virginia took action to increase the manufacturing and adoption of ROPS, but New York saw problems that would be insurmountable. Increased focus on team composition might be needed to establish effective Action Learning teams to address this problem. PMID:22994641

Ergonomic assessment of brake and accelerator mechanisms of MF285 and MF399 tractors using electromyography method

Directory of Open Access Journals (Sweden)

A Nikkhah

2016-04-01

Full Text Available Introduction: Too many people are working in the agricultural sector and therefore, pay more attention to the safety and health at work in the agricultural sector is important. This issue is more important in developing industrial countries where the level of the ergonomic working condition is less than that of developed countries. Attention to ergonomic condition of agricultural machinery drivers is one of the goals of agricultural mechanization. Therefore, in this study the ergonomic conditions of brake and accelerator mechanisms for MF285 and MF399 tractor's drivers were investigated using a new method. Materials and Methods: 25 people were selected for experiment. The electrical activity of Medialis gastrocnemius, Lateralis gastrocnemius, Vastus medialis, Vastus lateralis, Quadratus Lumborum and Trapezius muscles of drivers before and during pressing the pedal and after rest time were recorded using Biovision device. Measurements were performed for each person on each muscle 30 seconds before pressing the pedal, 60 seconds after pressing the pedal and after 60 seconds of rest. For all drivers, the muscles on the right side (brake and accelerator side have been selected and tested. The measurements were performed in compliance with appropriate time intervals between the measurements. Results and Discussion: Ergonomic assessment of brake pedal: The results showed that the RMS electrical activity of muscles of Vastus medialis and Medial gastrocnemius, during 60 seconds braking were 2.47 and 1.97. So, Vastus medialis and Medial gastrocnemius had the highest stress during pressing the MF399 tractor's brake pedal. Moreover, the Medial gastrocnemius and Lateral gastrocnemius with RMS electrical activity ratio of 2.47 and 1.74 had the highest RMS electrical activity ratio respectively, during 60 seconds braking compared to before braking of MF285 tractor. The comparison of results showed that the Vastus medialis and Trapezius had the higher stress

Wireline tractor production logging experience in Australian horizontal wells

Energy Technology Data Exchange (ETDEWEB)

Local, E.; Searight, T. L.

1998-12-31

Australian experiences with the development of new wireline tractor technology and its successful application to deploy production logging tools in horizontal wells was discussed. Dynamics of the tractor operations have been modelled and the model was validated with field data. The field data was also used to quantify borehole friction coefficients. Successful application in the field indicates that the tough tubing capability of the tractor, combined with its capacity to drive in large casing sizes, makes wireline deployment possible in a wide range of well completions. Work on a number of new applications such as the capability to negotiate complex downhole hardware, and to intervene in completions with widely differing tubing diameters, is in progress. 5 refs., 1 tab., 10 figs.

Agricultural Tractor Selection: A Hybrid and Multi-Attribute Approach

Directory of Open Access Journals (Sweden)

Jorge L. García-Alcaraz

2016-02-01

Full Text Available Usually, agricultural tractor investments are assessed using traditional economic techniques that only involve financial attributes, resulting in reductionist evaluations. However, tractors have qualitative and quantitative attributes that must be simultaneously integrated into the evaluation process. This article reports a hybrid and multi-attribute approach to assessing a set of agricultural tractors based on AHP-TOPSIS. To identify the attributes in the model, a survey including eighteen attributes was given to agricultural machinery salesmen and farmers for determining their importance. The list of attributes was presented to a decision group for a case of study, and their importance was estimated using AHP and integrated into the TOPSIS technique. In this case, one tractor was selected from a set of six alternatives, integrating six attributes in the model: initial cost, annual maintenance cost, liters of diesel per hour, safety of the operator, maintainability and after-sale customer service offered by the supplier. Based on the results obtained, the model can be considered easy to apply and to have good acceptance among farmers and salesmen, as there are no special software requirements for the application.

Effect of using GPS autosteer guidance systems on the eye-glance behavior and posture of tractor operators.

Science.gov (United States)

Karimi, D; Henry, J; Mann, D D

2012-10-01

Tractor operators are prone to neck and back discomfort and disorders. It is well known that awkward posture is a major contributor to this problem. Previous studies have investigated the prevalence of awkward posture and the resulting discomfort and disorders among tractor operators. They have also suggested various ways to mitigate this problem. With the introduction of new autosteer guidance systems, the tractor operator is relieved from the task of steering the tractor for most of the time during field work. Therefore, it is expected that the operator's posture will change. The goal of this study was to investigate the changes in the eye-glance behavior and posture of tractor operators as a result of using autosteer guidance systems. An eye-tracking system and a camcorder were used to record the eye-glance behavior and posture of 13 tractor operators as they performed seeding operations. The experiment with each operator consisted of two sessions. In one session, the operator used an autosteer system, while in the other session the operator steered the tractor manually. Analysis of the data showed that the eye-glance behavior and posture of the operators were significantly different between the autosteer and manual steering sessions. With the autosteer system, the operators spent less time in an awkward posture, and they changed their posture less frequently. However, even with the autosteer system, the operators spent 1/3 of their time in an awkward posture. Subjective feedback from the operators indicated that more than half of them experienced back or neck/shoulder discomfort during or after seeding. It is essential that the recommendations of the previous studies, such as using large rear-view mirrors or a rotating tractor seat, be evaluated when the operator is using an autosteer system. Other tools, such as video cameras that show the attached equipment, should also be tested to evaluate their effectiveness in reducing the operator's exposure to awkward

Fuzzy Logic Based Control of the Lateral Stability of Tractor Semitrailer Vehicle

Directory of Open Access Journals (Sweden)

Xiujian Yang

2015-01-01

Full Text Available A novel control scheme is proposed to improve the yaw stability of a tractor semitrailer vehicle in critical situations. The control scheme is a two-layer structure consisting of an upper yaw moment controller and a lower brake force distributor. The tractor and the trailer are, respectively, stabilized by two independent fuzzy logic based yaw moment controllers. The controllers for the tractor and the trailer are, respectively, designed to track the reference yaw rate of the tractor and the hitch angle between the tractor and the trailer while considering the variation of the hitch angular rate at the same time. The corrective yaw moments determined by the corresponding upper fuzzy yaw moment controllers are realized by active wheel braking. The performance of the proposed control scheme is evaluated by simulations on a nonlinear vehicle model. The results demonstrate that the proposed control scheme is robust and effective in stabilizing the severe instabilities such as jackknife and trailer oscillation in the chosen simulation scenarios. It is believed that this control scheme is robust to the variation of road adhesion conditions.

Conformal superalgebras via tractor calculus

Science.gov (United States)

Lischewski, Andree

2015-01-01

We use the manifestly conformally invariant description of a Lorentzian conformal structure in terms of a parabolic Cartan geometry in order to introduce a superalgebra structure on the space of twistor spinors and normal conformal vector fields formulated in purely algebraic terms on parallel sections in tractor bundles. Via a fixed metric in the conformal class, one reproduces a conformal superalgebra structure that has been considered in the literature before. The tractor approach, however, makes clear that the failure of this object to be a Lie superalgebra in certain cases is due to purely algebraic identities on the spinor module and to special properties of the conformal holonomy representation. Moreover, it naturally generalizes to higher signatures. This yields new formulas for constructing new twistor spinors and higher order normal conformal Killing forms out of existing ones, generalizing the well-known spinorial Lie derivative. Moreover, we derive restrictions on the possible dimension of the space of twistor spinors in any metric signature.

Levels of vibration transmitted to the operator of the tractor equipped with front axle suspension

Directory of Open Access Journals (Sweden)

Daniele Pochi

2013-09-01

Full Text Available In recent years the comfort and the preservation of the health of the operators became central issues in the evolution of agricultural machinery and led to the introduction of devices aimed at improving working conditions. Thereby, for instance, the presence of air conditioner, soundproof cab and driver seat suspension became normal on agricultural tractors. The vibrations are one of the most complex issues to deal with, being determined by the characteristics and interaction of elements such as tyres, axles, mainframe, cab and seat suspension. In this respect, manufacturers are trying to improve their products, even integrating these elements with new devices such as the suspension on the front axle of the tractor, aimed at reducing the level of vibrations during the transfers at high speed. One of these underwent tests at CRA-ING. Since its purpose is to reduce the level of vibration transmitted to the driver, their measurements in different points of the tractor and in different operating conditions, were compared in order to evaluate the effectiveness of the device, expressed as time of exposure. The suspension system of the front axle is designed to absorb the oscillations (especially pitching determined by irregularities in the road surface, allowing an increased control of the vehicle at high speed, as demonstrated by the test results and confirmed by the driving impressions outlined by the operator. The action of the device under these conditions results in an increase of the exposure time, important fact because of the relevance of the road transfer operations of tractors with mounted implements or trailers to tow and of the tendency to increase the speed limit for the road tractors (in Germany were brought to 50 km h–1 for several years. The action just described is less evident with increasing irregularity of the road surface and with the decrease of the travel speed. Nevertheless, in such conditions, the device appears to

The Tractor and Semitrailer Routing Considering Carbon Dioxide Emissions

Directory of Open Access Journals (Sweden)

Hongqi Li

2013-01-01

Full Text Available The incorporation of the minimization of carbon dioxide (CO2 emissions in the VRP is important to logistics companies. The paper deals with the tractor and semitrailer routing problem with full truckload between any two depots of the network; an integer programming model with the objective of minimizing CO2 emissions per ton-kilometer is proposed. A two-stage approach with the same core steps of the simulated annealing (SA in both stages is designed. The number of tractors is provided in the first stage and the CO2 emissions per ton-kilometer are then optimized in the second stage. Computational experiments on small-scale randomly generated instances supported the feasibility and validity of the heuristic algorithm. To a practical-scale problem, the SA algorithm can provide advice on the number of tractors, the routes, and the location of the central depot to realize CO2 emissions decrease.

Parental knowledge of child development and the assignment of tractor work to children.

Science.gov (United States)

Pickett, William; Marlenga, Barbara; Berg, Richard L

2003-07-01

Many childhood farm tractor injuries occur during the performance of work that was assigned by parents, and some tractor work is beyond the developmental capabilities of children. This has been highlighted recently by a policy statement authored by the American Academy of Pediatrics. The objective of this study was 1) to assess child development knowledge of farm parents who received a new resource, the North American Guidelines for Children's Agricultural Tasks (NAGCAT), and 2) to determine whether this knowledge was associated with use of NAGCAT in the assignment of tractor jobs and with compliance with 2 aspects of the NAGCAT tractor guideline. Secondary analysis of data collected during a randomized controlled trial that involved 450 farms in the United States and Canada was conducted. Variables assessed included 1) parental knowledge of child development across several age groups and 3 domains of child development (physical, cognitive, and psychosocial), 2) documentation of the most common tractor jobs assigned to each child, and 3) a report of whether NAGCAT was used in assigning these tractor jobs. High parental knowledge of child development was associated with enhanced use of NAGCAT and fewer violations when assigning tractor work to children. However, even in the presence of high knowledge, some farm parents still assigned to their children work that was in violation of NAGCAT. Educational interventions by themselves are not sufficient to remove many farm children from known occupational hazards. These findings are discussed in light of the recent policy statement on agricultural injuries from the American Academy of Pediatrics.

Ergonomic assessment of drivers in MF285 and MF399 tractors during clutching using algometer

Directory of Open Access Journals (Sweden)

Hossein Fallahi

2016-03-01

The results showed that the clutching forces for MF285 and MF399 tractors were 340 N and 290 N, respectively. The knee angle of the drivers of the two tractors was statistically different at the one percent level of significance. The reduction of pain threshold after 30 and 60 s clutching and also 60 s rest after clutching in MF285 tractor, for all three muscles, were more than those of MF399 tractor. The impact of clutching on the average decreases of pain threshold, for all drivers and all clutching periods, during and after clutching, in the Quadratus lumborum muscle was more than the other two muscles, in both tractors. In order to reduce the clutching force for MF285 tractor some modifications is suggested. In this regard the force transfer joint between the pedal and the clutch release linkage may be replaced with one made of cast iron.

The influence of the tire inflation on pull properties of agriculture tractors

Directory of Open Access Journals (Sweden)

Jakub Katrenčík

2013-01-01

Full Text Available Agricultural tractors are robust and versatile machines, which must comply with the basic requirements of users under various conditions. The main requirements include economical and reliable operation and high performance. Fuel economy could be improved using multiple methods, for example a well trained operator, adequate farming conditions and optimal tire inflation. Tractor tires transmit engine power to the surface and as such they are crucial to tractor operation. In the first part of the field measurement, all tires were inflated to 180kPa, while in the second part of the field measurements the tire pressure was set to 75kPa in front tires and to 65 kPa in rear tires. The results of the field measurement of the John Deere 6920S tractor with different tire inflation shows that pull performance increased by 9.9% and wheel slip decreased by 9.7%.

Evaluation of a Commercial Tractor Safety Monitoring System Using a Reverse Engineering Procedure.

Science.gov (United States)

Casazza, Camilla; Martelli, Roberta; Rondelli, Valda

2016-10-17

There is a high rate of work-related deaths in agriculture. In Italy, despite the obligato-ry installation of ROPS, fatal accidents involving tractors represent more than 40% of work-related deaths in agriculture. As death is often due to an overturn that the driver is incapable of predicting, driver assistance devices that can signal critical stability conditions have been studied and marketed to prevent accidents. These devices measure the working parameters of the tractor through sensors and elaborate the values using an algorithm that, taking into account the geometric characteristics of the tractor, pro-vides a risk index based on models elaborated on a theoretical basis. This research aimed to verify one of these stability indexes in the field, using a commercial driver as-sistance device to monitor five tractors on the University of Bologna experimental farm. The setup of the device involved determining the coordinates of the center of gravity of the tractor and the implement mounted on the tractor. The analysis of the stability in-dex, limited to events with a significant risk level, revealed a clear separation into two groups: events with high values of roll or pitch and low speeds, typical of a tractor when working, and events with low values of roll and pitch and high steering angle and forward speed, typical of travel on the road. The equation for calculating the critical speed when turning provided a significant contribution only for events that were typi-cal of travel rather than field work, suggesting a diversified calculation approach ac-cording to the work phase. Copyright© by the American Society of Agricultural Engineers.

Coca-Cola Refreshments Class 8 Diesel Electric Hybrid Tractor Evaluation: 13-Month Final Report

Energy Technology Data Exchange (ETDEWEB)

Walkowicz, K.; Lammert, M.; Curran, P.

2012-08-01

This 13-month evaluation used five Kenworth T370 hybrid tractors and five Freightliner M2106 standard diesel tractors at a Coca Cola Refreshments facility in Miami, Florida. The primary objective was to evaluate the fuel economy, emissions, and operational field performance of hybrid electric vehicles when compared to similar-use conventional diesel vehicles. A random dispatch system ensures the vehicles are used in a similar manner. GPS logging, fueling, and maintenance records and laboratory dynamometer testing are used to evaluate the performance of these hybrid tractors. Both groups drive similar duty cycles with similar kinetic intensity (0.95 vs. 0.69), average speed (20.6 vs. 24.3 mph), and stops per mile (1.9 vs. 1.5). The study demonstrated the hybrid group had a 13.7% fuel economy improvement over the diesel group. Laboratory fuel economy and field fuel economy study showed similar trends along the range of KI and stops per mile. Hybrid maintenance costs were 51% lower per mile; hybrid fuel costs per mile were 12% less than for the diesels; and hybrid vehicle total cost of operation per mile was 24% less than the cost of operation for the diesel group.

Evaluation of the agricultural tractor using biofuel and diesel oil; Avaliacao de um trator agricola utilizando biocombustivel e oleo diesel

Energy Technology Data Exchange (ETDEWEB)

Lopes, Reny Adilmar Prestes; Pinheiro Neto, Raimundo; Meyer, Wagner; Mendonca, Elton Costa de; Roberti, Marcelo [Universidade Estadual de Maringa (UEM), PR (Brazil)], Emails: raplopes@uem.br, rpneto@uem.br

2009-07-01

Test with alternative fuels is essential to evaluate the performance of machines and engines. In this paper, the performance of a tractor in chiseling operation was evaluated using oil diesel and biofuel (oil diesel + soybean vegetable oil mixture). Speed of displacement, slip wheels, force traction bar and fuel consumption was evaluated in areas under tillage and no-tillage. The speed of displacement of the set presented similar behavior in tillage and no-tillage. Bigger values mean force in the bar of traction, slip and fuel consumptions had been observed for no-tillage with the tractor operating with diesel. Bigger values mean consumption the biofuel had been observed in areas under tillage. The coverings of the soil had influenced in the values of force bar traction, slip wheels, speed of displacement and fuel consumption. In the studied conditions, the tests demonstrate that the mixture oil diesel + soybean vegetable oil had not influenced in the performance of the tractor. (author)

PARAMETER MATCHING OF INTERNAL COMBUSTION ENGINE AND ELECTROMECHANICAL POWER TRAIN OF WHEEL TRACTOR

Directory of Open Access Journals (Sweden)

A. V. Kliuchnikov

2012-01-01

Full Text Available The paper considers stepless electromechanical power train of a wheel tractor. Methodology for parameter matching of electromechanical transmission and internal combustion engine for their optimum performance as part of a power wheel tractor unit. 

High voltage electrification of tractor and agricultural machinery – A review

International Nuclear Information System (INIS)

Moreda, G.P.; Muñoz-García, M.A.; Barreiro, P.

2016-01-01

Highlights: • CO_2 emission reduction calls for energy-efficient mobile work machines. • Energy recovery could be possible in some agricultural machinery operations. • Owning and operating costs of electrified tractor-implement pairs should be analyzed. • Plug-in hybrid electric tractors running along tramlines make sense. • Electrification allows for precise speed control, noise reduction and flexible design. - Abstract: Reduction of both pollutant emissions and fossil fuel dependency is an objective of energy policies worldwide. In many countries, governments promote the use of efficient vehicles like the hybrid electric vehicle. Incorporation of electric drives in tractor and agricultural machinery presents advantages in terms of increased energy efficiency and expanded functionalities. Higher efficiency means reduction in fuel consumption and subsequent decrease in CO_2 emission. New functionalities improve work quality and increase operator comfort. Tractor electrification takes advantage of decoupling loads and drives from the engine, which allows operating the latter at its highest efficiency point. Major advantages of machinery electrification are torque and speed control, noise reduction, and a more flexible design. In this paper, a review of the state-of-the-art of agricultural machinery high voltage electrification is presented.

The official guide to the TOEFL test

CERN Document Server

2017-01-01

The new Official Guide to the TOEFL® Test is the best, most reliable guide to the test that is used to meet English-language proficiency requirements at more than 10,000 institutions worldwide, including top universities in Australia, Canada, the U.K. and the U.S. This completely updated fifth edition includes real TOEFL test questions for practice, as well as explanations of all four sections of the test. The guide provides learners with information on how to integrate reading, listening, speaking and writing skills in order to construct effective answers that demonstrate university-level English proficiency. Inside you'll find: • Hundreds of authentic TOEFL test questions and essay topics from the test maker • Four authentic TOEFL iBT practice tests (available in the book and on DVD) • Test-taking strategies to help you do your very best on the test

SmartWay Mark Signature Page: Tractors & Trailers

Science.gov (United States)

This SmartWay agreement is for companies and organizations who wish to comply with the SmartWay Graphic Standards and Usage Guide guidelines and requirements for using the SmartWay logos on SmartWay designated Tractors and Trailers.

Ergonomic assessment of drivers in MF285 and MF399 tractors during clutching using algometer

OpenAIRE

Hossein Fallahi; Mohammad Hossein Abbaspour-Fard; Amin Azhari; Mehdi Khojastehpour; Amin Nikkhah

2016-01-01

Tractor as one of the most widely used agricultural machinery should be considered from different aspects. The frequent application of clutch and brake pedals and also the steering wheel within farms, along with the unfavorable working conditions, cause negative effects on the occupational health of the tractor drivers. Thus, in this research, the imposed forces on three engaged muscles including: Gastrocnemius, Trapezius and Quadrate’s lumborum of the tractor drivers during clutching have be...

Accidents with tractors and agricultural machinery in public transport of Republic of Serbia without provinces

OpenAIRE

Gliogrevic, Kosta; Oljaca, Mico; Ruzicic, Lazar; Dimitrovski, Zoran

2012-01-01

Working processes in agriculture nowadays cannot be imagined without the use of modern agricultural mechanization, especially primary power unit, tractor. Along with the tractor unit development and the benefits induced by its application, according to the author’s research, these machines are one of the main causes of accidents with different types of violations of the participants, and the tragic consequences. The great number of those accidents with tractors and other agricultural machiner...

Non-Diffractive Tractor Beams

DEFF Research Database (Denmark)

Novitsky, Andrey; Gao, Dongliang; Gorlach, Alexey A.

2017-01-01

Pulling optical force discovered recently in the theory and experiment has drawn great attention owing to its counterintuitive nature and promising applications. Pulling force originates from the enhanced forward light scattering that in accordance with the momentum conservation conveys light...... demonstrate how to ease the conditions required in experiment for realization of the optical tractor beams using the cylindrical objects. We pay a particular attention to the case of the pulling optical force due to the interaction of magnetic dipole and quadrupole moments....

Investigation of UK Farmer Go/No-Go Decisions in Response to Tractor-Based Risk Scenarios.

Science.gov (United States)

Irwin, Amy; Poots, Jill

2018-01-01

Tractors are a source of injury and fatality in agriculture. Despite this farmers continue to engage in risk-taking behaviors, including operating tractors without appropriate equipment. In order to change behaviors and attitudes toward safety, it is important to understand how farmers approach different types of risk relevant to tractor use. The current study used a qualitative approach to investigate farmer perception of four types of tractor-based risk related to self, equipment, lack of safety features, and environment. A sample of 148 farmers from the United Kingdom and Ireland was recruited from farming forums to take part in an online scenario-based qualitative study. Participants were presented with 12 tractor-based scenarios, three from each category of risk, and asked to indicate if they would proceed to use the tractor (go) or not (no-go), then report their reasoning. Thematic analysis was used to identify data patterns. Farmers appeared to assess the consequences of risk in broader terms than the risk of injury to themselves; they also evaluated risk in terms of potential costs (e.g., repair bill) and losses (e.g., delay). Analysis indicated that financial risk was considered with more caution than personal risk in many cases. Farmers also considered usability, such as the functionality of tractor seat belts, indicating the importance of ensuring all safety equipment is fit for purpose. The management of agricultural risk should consider farmer priorities (such as financial costs) in order to develop effective messaging that focuses on those priorities, with the aim of reducing risk-taking behaviors.

IMPACT OF THE REPEATED TRACTOR PASSES ON SOME PHYSICAL PROPERTIES OF SILTY LOAM SOIL

Directory of Open Access Journals (Sweden)

Dubravko Filipović

2011-12-01

Full Text Available The aim of this paper was to quantify soil compaction induced by tractor traffic on untilled wet silty loam soil (Mollic Fluvisol. Changes in penetration resistance, bulk density and total porosity were measured for detecting the soil compaction. Treatments include ten passes of a four-wheel drive tractor with the engine power of 54.0 kW and weight of 3560 kg (1580 kg on the front axle and 1980 kg on the rear axle, 2.41 m distance between axles. The tyres on the tractor were cross-ply, front 11.2-24 and rear 16.9-30, with the inflation pressure of 160 kPa and 100 kPa, respectively. The speed of tractor during passes over experimental plots was 5.0 km h-1. In comparison to control, each tractor pass induced an increase in soil penetration resistance at all depths, and the average increment ratios, determined as the average of all layers, were 9.8, 18.5 and 26.1% after one, five and ten passes, respectively. The bulk density also increased with number of tractor passes, but with less percentage increasing. The increment ratios comparison to the control were 3.6, 9.5 and 12.9% after one, five and ten passes, respectively. The total porosity decreased with the number of passes, and the decrement ratios were 4.5, 16.5 and 20.8% after one, five and ten passes, respectively.

9 CFR 80.4 - Segregation of animals positive to an official Johne's disease test during interstate movement.

Science.gov (United States)

2010-01-01

... official Johne's disease test during interstate movement. 80.4 Section 80.4 Animals and Animal Products... animals positive to an official Johne's disease test during interstate movement. Animals that are positive... from the animals positive to an official Johne's disease test to the healthy animals in the vehicle. ...

Official emblem of the Apollo Soyuz Test Project

Science.gov (United States)

1974-01-01

This is the Official emblem of the Apollo Soyuz Test Project (ASTP) chosen by NASA and the Soviet Academy of Sciences. Of circular design, the emblem has the words Apollo in English and Soyuz in Russian around a center disc which depicts the two spacecraft docked together in Earth orbit. The Russian word 'soyuz' means 'union' in English.

Performance of an agricultural tractor in no tillage as a function of displacement speed and the seeders' tire inflation pressure

Energy Technology Data Exchange (ETDEWEB)

Furlani, Carlos Eduardo Angeli; Cortez, Jorge Wilson; Silva, Rouverson Pereira da; Grotta, Danilo Cesar Checchio; Toledo, Anderson de [Universidade Estadual Paulista (UNESP), Jaboticabal, SP (Brazil)], E-mail: furlani@fcav.unesp.br

2008-07-01

The performance of an agricultural tractor under field conditions results from the tire wheel interaction together with its displacement speed. This work was developed to assess the performance of an agricultural tractor under the (75, 70, and 60 psi) tire inflation pressure conditions of a seeder and in two different gears providing speeds of 3.0 and 6.0 km h{sup -1}. The experiment took place at Sao Paulo State University (UNESP), at the Jaboticabal Campus, and was conducted by Laboratory of Machines and Agricultural Mechanization (LAMMA) at the Department of Rural Engineering. The delineation used was entirely randomized in a 2-factor factorial scheme (3 x 2) with 4 repetitions. We also observed that fuel consumption was influenced only by the tractor gear. Energy consumption was greater as speed increased, caused by gear shifting. The displacement speed was greater for the 75-psi pressure due to a lesser slippage in the seeder when under this pressure. Tractor slippage and initial stand did not change with the tested factors. (author)

9 CFR 80.3 - Movement of domestic animals that are positive to an official Johne's disease test.

Science.gov (United States)

2010-01-01

... positive to an official Johne's disease test. 80.3 Section 80.3 Animals and Animal Products ANIMAL AND... animals that are positive to an official Johne's disease test. (a) Movement of domestic animals for slaughter. Domestic animals that are positive to an official Johne's disease test may be moved interstate...

Evaluation of the use of low-cost GPS receivers in the autonomous guidance of agricultural tractors

Energy Technology Data Exchange (ETDEWEB)

Alonso-Garcia, S.; Gomez-Gil, J.; Arribas, J. I.

2011-07-01

This paper evaluates the use of low-cost global positioning system (GPS) receivers in the autonomous guidance of agricultural tractors. An autonomous guidance system was installed in a 6400 John Deere agricultural tractor. A low cost GPS receiver was used as positioning sensor. Three different control laws were implemented in order to evaluate the autonomous guidance of the tractor with the low-cost receiver. The guidance was experimentally tested with the tracking of straight trajectories and with the step response. The total guidance error was obtained from the receiver accuracy and from the guidance error. For the evaluation of the receivers accuracy, positioning data from several low cost receivers were recorded and analyzed. For the evaluation of the guidance error, tests were performed with each control law at three different speeds. The conclusions obtained were that relative accuracy of low-cost receivers decreases with the time; that for an interval lower than 15 min, the error usually remains below 1 m; that all the control laws have a similar behavior and it is conditioned by the control law adjustment; that automatic guidance with low cost receivers is possible with speeds that went up to 9 km h{sup -}1; and finally, that the total error in the guidance is mainly determined by the receivers accuracy. (Author) 46 refs.

Artificial neural network applying for justification of tractors undercarriages parameters

Directory of Open Access Journals (Sweden)

V. A. Kuz’Min

2017-01-01

Full Text Available One of the most important properties that determine undercarriage layout on design stage is the soil compaction effect. Existing domestic standards of undercarriages impact to soil do not meet modern agricultural requirements completely. The authors justify the need for analysis of traction and transportation machines travel systems and recommendations for these parameters applied to machines that are on design or modernization stage. The database of crawler agricultural tractors particularly in such parameters as traction class and basic operational weight, engine power rating, average ground pressure, square of track basic branch surface area was modeled. Meanwhile the considered machines were divided into two groups by producing countries: Europe/North America and Russian Federation/CIS. The main graphical dependences for every group of machines are plotted, and the conforming analytical dependences within the ranges with greatest concentration of machines are generated. To make the procedure of obtaining parameters of the soil panning by tractors easier it is expedient to use the program tool - artificial neural network (or perceptron. It is necessary to apply to the solution of this task multilayered perceptron - neutron network of direct distribution of signals (without feedback. To carry out the analysis of parameters of running systems taking into account parameters of the soil panning by them and to recommend the choice of these parameters for newly created machines. The program code of artificial neural network is developed. On the basis of the created base of tractors the artificial neural network was created and tested. Accumulated error was not more than 5 percent. These data indicate the results accuracy and tool reliability. It is possible by operating initial design-data base and using the designed artificial neural network to define missing parameters.

A Tractor or an Automobile? A 1920s Farm Family Faces a Decision.

Science.gov (United States)

Kunze, Joel P.

1991-01-01

Outlines a lesson plan in which students role play a 1920s farm family deciding whether to buy an automobile or a tractor. Other students act as automobile and tractor sales groups. Explains how the lesson illuminates relationships between technological advance and social history. Includes handouts identifying benefits of purchasing cars or…

Emission and operating performance of a biomethane tractor with dual fuel engine; Emissions- und Betriebsverhalten eines Biomethan-Traktors mit Zuendstrahlmotor

Energy Technology Data Exchange (ETDEWEB)

Mautner, Sebastian [Technologie- und Foerderzentrum (TFZ), Straubing (Germany); Emberger, Peter; Thuneke, Klaus; Remmele, Edgar

2016-08-01

The use of biomethane as fuel for agricultural machinery with dual fuel technology is contributing to climate protection and ensures safe fuel supply. So far, hardly any documented operational experiences are known. The aim of the project, funded by the Bavarian Ministry of Economic Affairs and Media, Energy and Technology, was to investigate practicability for daily use and the emission behaviour of a Valtra N101 prototype tractor (exhaust stage IIIA). The retrofitted dual-fuel technology of the former conventional diesel tractor simultaneously uses biomethane or natural gas and diesel as ignition fuel. During the field test over 590 working hours, the tractor showed overall high reliability. On average the operating range in dual-fuel mode with one complete filling of the gas tanks was about 11.5 hours. On the tractor test bench a significant improvement of the exhaust emissions could be observed, since the gas ECU had been optimized and changed by the manufacturer. For dual-fuel operation, nitrogen oxides (NO{sub x}) are lower, whereas carbon monoxide (CO), hydrocarbons (HC) and particulate matter emissions (PM) are higher compared to solely diesel operation. In particular, HC emissions exceed the proposed limiting value, submitted by the European Commission. This is due to incomplete gas combustion and insufficient conversion by the exhaust after-treatment-system (methane slip). A big potential for optimization is expected by adjusting the operating point-specific gasdiesel ratio and improving the exhaust gas aftertreatment system.

Enhanced Gravity Tractor Technique for Planetary Defense

Science.gov (United States)

Mazanek, Daniel D.; Reeves, David M.; Hopkins, Joshua B.; Wade, Darren W.; Tantardini, Marco; Shen, Haijun

2015-01-01

Given sufficient warning time, Earth-impacting asteroids and comets can be deflected with a variety of different "slow push/pull" techniques. The gravity tractor is one technique that uses the gravitational attraction of a rendezvous spacecraft to the impactor and a low-thrust, high-efficiency propulsion system to provide a gradual velocity change and alter its trajectory. An innovation to this technique, known as the Enhanced Gravity Tractor (EGT), uses mass collected in-situ to augment the mass of the spacecraft, thereby greatly increasing the gravitational force between the objects. The collected material can be a single boulder, multiple boulders, regolith or a combination of different sources. The collected mass would likely range from tens to hundreds of metric tons depending on the size of the impactor and warning time available. Depending on the propulsion system's capability and the mass collected, the EGT approach can reduce the deflection times by a factor of 10 to 50 or more, thus reducing the deflection times of several decades to years or less and overcoming the main criticism of the traditional gravity tractor approach. Additionally, multiple spacecraft can orbit the target in formation to provide the necessary velocity change and further reduce the time needed by the EGT technique to divert hazardous asteroids and comets. The robotic segment of NASA's Asteroid Redirect Mission (ARM) will collect a multi-ton boulder from the surface of a large Near-Earth Asteroid (NEA) and will provide the first ever demonstration of the EGT technique and validate one method of collecting in-situ mass on an asteroid of hazardous size.

ENHANCEMENT OF DURABILITY OF TRACTOR SUSPENSION AXLES

Directory of Open Access Journals (Sweden)

I. Doshchechkina

2017-12-01

Full Text Available The ‘soft’ nitriding of the suspension axle surface of the T150K tractor at the depth of 0.08 mm enables us to enhance its constructive strength, to increase its service life by 25 % and have a considerable economic effect.

Design and Development of A Three-Point Auto Hitch Dynamometer for An Agricultural Tractor

Directory of Open Access Journals (Sweden)

A. F. Kheiralla

2017-12-01

Full Text Available This paper describes the design, development and calibration of a three-point auto hitch dynamometer for measuring the horizontal and vertical forces that existed at the three-point hitch of an agricultural tractor.  The design concept of the dynamometer was based on an instrumented inverted U frame assembly that was mounted between tractor links and implement. The design incorporates for both lower point hitch spread and mast height adjustments, and quick hitch capability in accordance with category 1 and II three-point hitch system.  The force sensing elements were comprised of three steel extended octagonal ring transducers that were located between the inverted U frame and hook brackets.  Electrical resistance strain gauges were mounted on the extended octagonal ring transducer at strain angle nodes to independently monitor strains that were proportional to the horizontal and vertical forces at the ring center. Each transducer was designed for maximum horizontal and vertical forces of 25 kN and 10 kN at measurement mean sensitivities of 25.19 µStrain/kN and 25.60 µStrain/kN, respectively. However, the complete dynamometer has been designed to measure the maximum resultant horizontal and vertical forces of 50 kN and 20 kN, respectively.  Field demonstration tests on the dynamometer and data acquisition system showed that they were able to function effectively as intended.  The data acquisition system was able to successfully scan and record the dynamometer signals as programmed.  This dynamometer was part of the complete instrumentation system to be developed onboard a Massey Ferguson 3060 tractor for the generation of a comprehensive database on the power and energy requirements of the tractor and its working implement in the field.

Evaluation of Massey Ferguson Model 165 Tractor Drivers exposed to whole-body vibration

Directory of Open Access Journals (Sweden)

P. Nassiri

2013-12-01

Conclusion: This study shows that the need to provide intervention , controlling and managing measures to eliminate or reduce exposure to whole body vibration among tractor drivers its necessary. And, preventing main disorder Including musculoskeletal disorders, discomfort and early fatigue is of circular importance. More studies are also necessary to identify the sources of vibration among various of tractors.

A mission planner for an autonomous tractor

DEFF Research Database (Denmark)

Bochtis, Dionysis; Vougioukas, S.G.; Griepentrog, Hans W.

2009-01-01

. Using the tree hierarchy of the mission file, several actions are determined, including the sequence of points the tractor has to follow, the type of motion between successive points (e.g.,straight motion or maneuvering), the type of predefined turning routine used in maneuvering, and the actions...

Evaluating tractor performance and exhaust gas emissions using biodiesel from cotton seed oil

International Nuclear Information System (INIS)

Al-lwayzy, Saddam H; Yusaf, Talal; Jensen, Troy

2012-01-01

Alternative fuels for diesel engines, such as biodiesel, have attracted much attention recently due to increasing fuel prices and the imperative to reduce emissions. The exhaust gas emissions from tractors and other agricultural machinery make a significant contribution to these emissions. The use of biodiesel in internal combustion engines (ICE) has been reported to give comparable performance to conventional diesel (CD), but with generally lower emissions. There is however, contradictory evidence of NO emissions being both higher and lower from the use of biodiesel. In this work, agriculture tractor engine performance and its emission using both CD and biodiesel from cotton seed oil (CSO-B20) mixed at a 20% blend ration has been evaluated and compared. The PTO test results showed comparable exhaust emissions between CD and CSO-B20. However, the use of CSO-B20 led to reductions in the thermal efficiency and exhaust temperature and an increase in the brake specific fuel consumption (BSFC), when compared to CD.

INTEGRAL ASSESSMENT OF EFFICIENCY OF A FLEET OF AGRICULTURAL MACHINERY AND TRACTORS

Directory of Open Access Journals (Sweden)

V. M. Korotchenya

2015-01-01

Full Text Available An indicator for an integral assessment of efficiency of a fleet of agricultural machinery and tractors is proposed. Its calculating consists in multiplying partial efficiencies together: technical and price efficiency of agricultural production, and eco-efficiency of a fleet of agricultural machinery and tractors. Using an axiomatic method, the concept of efficiency of fleet was studied within broader category of productivity and in wider scales - within agriculture. The most general and obvious statements according to which efficiency of machine and tractor fleet is considered as indirectly settlement size counted proceeding from efficiency of agricultural production, were accepted as axioms. In general, efficiency is a ratio between productivity of an object in question and that of the theoretical ideal or an object with maximum productivity efficiency of which is accepted equal to unity or 100%. Technical efficiency of agricultural production characterizes the ability of an agricultural sector to produce the technically maximum output of agricultural produce obtained from the available resources (land, labor, machines, etc.. Price efficiency evaluates the ability of an agricultural sector to produce output of agricultural produce with regard to employing the optimal mix of resources given their prices. Because the theoretical ideal does not exist, efficiency of an agricultural sector, e.g. in Russia and of its fleet of agricultural machinery and tractors, is measured against agriculture of another country with maximum productivity efficiency of which is accepted as equal to unity or 100 percent. The calculation can be made on the basis of the Data Envelopment Analysis method. It is possible to calculate price and economic efficiency of Russian agriculture (fleet of agricultural machinery and tractors due to use its domestic prices.

Implementation of Virtual Reality in the Conceptual Design of a Tractor Trailer

OpenAIRE

Arunesh Chandra; Pankaj Chandna

2014-01-01

Virtual reality (VR) is a rapidly emerging computer interface that attempts to immerse the user completely within an experimental recreation; thereby, greatly enhancing the overall impact and providing a much more intuitive link between the computer and the human participants. The main objective of this study is to design tractor trailer capable of meeting the customers’ requirements and suitable for rough conditions to be used in combination with a farm tractor in India....

Operational comparison of two types of tractor sprayers (microner and boom-type against wheat crop weeds

Directory of Open Access Journals (Sweden)

M Hamid

2015-09-01

other one was flowage nozzle and they were compared with control treatment. Experiment design was Randomized Completed blocks Design (RCBD with seven replications. Parameters such as spraying quality, diameter, volume mean diameter and numerical mean of droplets, spray quality factor, the percentage of crash crop, weeds dry weight and number, percentage of weed control and the drift were measured. The results were compared with a control treatment. For comparative tests between the sprayers, the measured parameters were compared with each other using SAS software. Results and Discussion: Volume mean diameter and numerical mean diameter in tractor mounted microner sprayer with medium and low speed rotation disk treatment and also tractor mounted boom sprayer with Italian fan nozzle treatment were metered 162.5, 461 and 635.5 micron, and 138.5, 355 and 452.5 micron, respectively. Volume mean diameter related to numerical mean diameter was obtained to be 1.17 and 1.3 for tractor mounted microner sprayer with medium and low levels of speed rotation disk, and 1.4 for tractor mounted boom sprayer with Italian fan nozzle, respectively. Whenever the spray quality coefficient is closer to one, the spray quality is better. So microner sprayer treatment with 1.17 coefficient has the best spray quality. The results about weeds control numbers showed all treatments had significant difference with control treat in 1% levels (Table 3. Evaluating all treatment results showed the flowage nozzle with 22.57 weeds number and 27.26 g. weeds dry weight had significant difference with other treatments in 1% levels that was the best operation (Table 4. In comparison of sprayers’ technical evaluation, all treatments had significant difference in 1% levels, so the flowage nozzle with 191.66 l.ha solution consumption and microner treatment with medium speed rotation disk with 44.38 l.ha solution consumption were the most and the least treatments. And they have significant difference in 1

DETERMINATION OF TRANSMISSION GEAR RATIO IN MECHANICAL PART OF TRACTOR ELECTRO-MECHANICAL TRANSMISSION

Directory of Open Access Journals (Sweden)

Ch. I. Zhdanovich

2016-01-01

Full Text Available A methodology has been developed for selection of gear number and transmission gear ratios in mechanical part of a wheel-type tractor with electro-mechanical transmission containing a propulsion asynchronous electric motor with variablefrequency control. The paper proposes to determine a transmission gear ratio on the basis of the following: provision of wheel torque dependence on tractor speed which is the best one for a traction process and during transfer from one gear to the other; provision of nominal operational mode of the electric motor for all tractor operations where it is working for a long period of time; provision of minimum possible number of gears; complete realization of internal combustion engine power on the tractor wheels at limit operational mode of the electric motor. As a characteristic of the asynchronous electric motor with variable-frequency control contains various portions which can be used either completely or partially due to operating conditions, the gear number is determined in the process of transmission gear ration finding but not prior to this. A wheel torque of the tractor with electro-mechanical transmission can be limited according to the following factors: grip of wheel with supporting surface; maximum power of an internal combustion engine which can be transferred to the wheels and a torque which is developed by a propulsion electric motor. It is not proposed to exceed nominal operational mode of the propulsion electric motor for all the operations of the tractor if it is working for a long period of time because in the case of significant excess of the nominal operational mode of the asynchronous electric motor its rather long operation leads to low efficiency and high losses in power, large heat liberation and consequently requires to develop more complicated system for electric motor cooling. An excess of nominal electric motor torque can be justified for short-term operational modes because in this case

Analysis of tractor particulate emissions in a modified NRSC test after implementing a particulate filter in the exhaust system

Directory of Open Access Journals (Sweden)

Siedlecki Maciej

2017-01-01

Full Text Available Retrofitting, which means retrofitting old generation engine systems with modern exhaust after treatment systems, is becoming increasingly popular, which allow vehicles to adhere to the newer and more stringent emission norms. This can save the operators of such vehicles money using older engineered designs without the need to design a new unit or buy an expensive new machine or vehicle. At present, there is a growing interest in emissions from off-road vehicles and the introduction of minimum limits for older vehicles that must be met in order to be able to allow for their operation. For the purposes of this article, the Stage IIIA farm tractor has been fitted with a particulate filter in the exhaust system. The study investigated the impact of the use of exhaust after treatment systems on particle emissions in terms of mass, size distribution and number using PEMS analyzers in the modified NRSC stationary test by engine loading, using a mobile engine dynamometer and comparison of test results.

A SURVEY OF FARM TRACTOR MANAGEMENT IN ZAMFARA STATE

African Journals Online (AJOL)

2013-03-01

Mar 1, 2013 ... farm tractor, maintenance, management, mechanization, survey study. 1. Introduction ... demand for agricultural operations, there is an ever .... 3rd Ed., AVI Publishing. Company, Inc., Westport, Connecticut, 1978. 8. Apollos ...

Towing Asteroids with Gravity Tractors Enhanced by Tethers and Solar Sails

Science.gov (United States)

Shen, Haijun; Roithmayr, Carlos M.

2015-01-01

Material collected from an asteroid's surface can be used to increase gravitational attraction between the asteroid and a Gravity Tractor (GT); the spacecraft therefore operates more effectively and is referred to as an Enhanced Gravity Tractor (EGT). The use of tethers and solar sails to further improve effectiveness and simplify operations is investigated. By employing a tether, the asteroidal material can be placed close to the asteroid while the spacecraft is stationed farther away, resulting in a better safety margin and improved thruster efficiency. A solar sail on a spacecraft can naturally provide radial offset and inter-spacecraft separation required for multiple EGTs.

Eficiência energética de tratores agrícolas fabricados no Brasil Energy efficiency of Brazilian agricultural tractors

Directory of Open Access Journals (Sweden)

Gastão M. da Silveira

2010-04-01

Full Text Available Atualmente, cresce o interesse global na economia de combustível fóssil e na redução das emissões de gases, por motivos econômicos e ecológicos. Neste trabalho se aplicou um método para classificação de tratores agrícolas, com base na sua eficiência energética, usando-se o consumo específico (em L kWh-1 como termo de comparação. O fator energético mais importante para essa máquina é o seu motor, seguido da transmissão. O trabalho se baseia no resultado dos ensaios de tratores realizados segundo normas brasileiras, tendo como modelo o código OECD, além de ser uma classificação de modelos de tratores fabricados no País. Os tratores movidos a álcool apresentaram consumo elevado de combustível. A metodologia permite a idéia de como os tratores se comportam, no que diz respeito à eficiência energética.Nowadays there is a growing global interest in saving fossil fuel and reducing gas emissions for economical and ecological reasons. This research applied a method of classification of agricultural tractors depending on their energy efficiency, using the specific fuel consumption (in L kWh-1 as a comparison. The most important energy factor in these machines is the engine, followed by the transmission. This research is based on results of the OECD tractor test and classifies tractor models, which have been principally sold in Brazil. The tractors fueled by ethanol presented a high level of fuel consumption. The methodology allows us to understand how tractors perform in terms of energy efficiency.

Auxiliary brakes for trucks : research into the behaviour of a tractor-semi-trailer combination during emergency breaking.

NARCIS (Netherlands)

Dijks, A. Blijswijk, W.A.M. van Genugten, J. van Meeke, G.J.M. & Schlösser, L.H.M.

1976-01-01

The purpose of the research was to obtain an insight into various secondary braking systems for goods vehicles. Practical tests were carried out with a tractor- semi-trailer combination. The performance of various split braking systems as well as spring brake actuators are shown. With nearly all of

performance (assessment) of two- wheel tractors for small holder

African Journals Online (AJOL)

CHIKA

and easy operation and maintenance; reasonably rugged ... whole the professional two- wheel tractor is expected to have ... in order to achieve reasonable productivity in developing .... producers of both food and cash crops in. Nigeria, power ...

Tractor performance monitor based on a single-chip microcomputer

Energy Technology Data Exchange (ETDEWEB)

Bedri, A.R.; Marley, S.J.; Buchelle, W.F.; Smay, T.A.

1981-01-01

A tractor performance monitor based on a single-chip microcomputer was developed to measure ground speed, slip, fuel consumption (rate and total), total area, theoretical time, and total time. Transducers used are presented in detail. 5 refs.

Sex differences in principal farm operators' tractor driving safety beliefs and behaviors.

Science.gov (United States)

Cole, H P; Westneat, S C; Browning, S R; Piercy, L R; Struttmann, T

2000-01-01

To examine the widely accepted hypothesis that farm women are more concerned with safety issues and behaviors than their male counterparts are. A telephone survey was administered to a random sample of Kentucky principal farm operators, 90 of whom were women. Participants were questioned about their tractor safety beliefs and practices. No significant sex differences in tractor safety perceptions and behavior were observed. Socialization of women to the role of principal farm operator may override their typically greater sensitivity to safety issues, an important consideration when designing safety campaigns for this population.

Design of a New Sensor for Determination of the Effects of Tractor Field Usage in Southern Spain: Soil Sinkage and Alterations in the Cone Index and Dry Bulk Density

Directory of Open Access Journals (Sweden)

Diego L. Valera

2012-10-01

Full Text Available Variations in sinkage and cone index are of crucial importance when planning fieldwork, and for determining the trafficability of farm machinery. Many studies have highlighted the link between higher values of these parameters and dramatic decreases in crop yield. Variations in the dry bulk density and cone index of clayey soil in Southern Spain were measured following each of five successive passes over the same land with the three types of tractor most widely used in the area (tracked, two-wheel drive and four-wheel drive. In addition, sinkage (rut depth of the running gear was measured using a laser microrelief profile meter. This device, which integrates three sensors, was specifically designed for these experiments, as was an electrical penetrometer to determine the cone index, and both instruments proved reliable and accurate in the field. The main goal of this study was to design, manufacture and test these new devices. The first pass caused most soil alteration when compared to successive passes for all types of tractor tested and soil conditions prevailing during the tests. (Heavier four-wheel drive tractors were found to cause greater soil damage (sinkage, cone index and dry bulk density than two-wheel drive and track tractors. There was no statistically significant difference between the two latter types. The greatest alterations were recorded in the top 10 cm of the soil. The results show that soil compaction should be avoided as much as possible. This can be achieved by ensuring that tractors always travel along the same tracks, especially in the wet season. At present these aspects are not considered by farmers in this area.

TractoR: Magnetic Resonance Imaging and Tractography with R

Directory of Open Access Journals (Sweden)

Chris A. Clark

2011-10-01

Full Text Available Statistical techniques play a major role in contemporary methods for analyzing magnetic resonance imaging (MRI data. In addition to the central role that classical statistical methods play in research using MRI, statistical modeling and machine learning techniques are key to many modern data analysis pipelines. Applications for these techniques cover a broad spectrum of research, including many preclinical and clinical studies, and in some cases these methods are working their way into widespread routine use. In this manuscript we describe a software tool called TractoR (for “Tractography with R”, a collection of packages for the R language and environment, along with additional infrastructure for straightforwardly performing common image processing tasks. TractoR provides general purpose functions for reading, writing and manipulating MR images, as well as more specific code for fitting signal models to diffusion MRI data and performing tractography, a technique for visualizing neural connectivity.

Design, development, and evaluation of an automatic guidance system for tractor tracking along the contour line on inclined surfaces

Directory of Open Access Journals (Sweden)

S Dehghani

2016-04-01

to actuator- units include an electric- gearbox motor that stimulate the steering wheel shaft of the tractor by chain and sprocket and conduct the tractor in leveling traces at the desired speed. Before hitching any implements such as row planter behind the tractor, the system was successfully tested on average slopes of 14.5% using a tracing powder. Results and Discussion: A plot of the average elevation of each 12 lines traced for a length of about 50 meters, H0, versus the actual elevation of 12 to 16 equally spaced points of each trace, H, produced the following relationship: H0= 0.142+ 0.990 H Indicating a reasonably acceptable performance with standard error and R2 0.048 and 99.3% respectively. Conclusions:The row planting in various slopes coincided with the contour lines of ground (Duncan’s Multiple Range Test p ≤ 0.05. Also, no significant difference was observed among the slopes and index of length and dry weight of root and shoot. The percentage of the emergence index in the high slopes (18-21% showed significant differences. Hence by increasing slopes, the percentage of seed emergence was decreased.

Retrofitting tractors with rollover protective structures: perspective of equipment dealers.

Science.gov (United States)

Tonelli, S M; Donham, K J; Leedom-Larson, K; Sanderson, W; Purschwitz, M

2009-10-01

This study was one of a cluster of studies that originated via requests for proposals from the NIOSH National Agricultural Tractor Safety Initiative. The present study design consisted of several steps: (1) formation of an advisory group, (2) development and testing of a standard paper self-responding survey instrument, (3) sample selection of farm equipment dealers, (4) administration of the survey, (5) assessment and analysis of the survey, and (6) in-person response panel of dealers (n = 80) to review results of the questionnaire for further definition and sharpening of the recommendations from the survey. A key finding is that most dealers do not currently sell or install ROPS retrofit kits. Barriers cited by dealers included (1) actual or perceived lack of farmer demand, (2) injury liability, (3) expensive freight for ordering ROPS, (4) lack of dealer awareness of the magnitude of deaths from tractor overturns and the high life-protective factor of ROPS, and (5) difficulty and incursion of non-recoverable expenses in locating and obtaining specific ROPS. Despite not currently selling or installing ROPS, dealers responded favorably about their future potential role in ROPS promotion and sales. Dealers were willing to further promote, sell, and install ROPS if there was demand from farmers. Recommendations include establishing a ROPS "clearing house" that dealers could contact to facilitate locating and obtaining ROPS orders from customers. Additional recommendations include education and social marketing targeting farm machinery dealers as well farmers, manufacturers, and policy makers.

Piezoelectric-based actuators for improved tractor-trailer performance (Conference Presentation)

Science.gov (United States)

Menicovich, David; Amitay, Michael; Gallardo, Daniele

2017-04-01

The application of piezo-electrically-driven synthetic-jet-based active flow control to reduce drag on tractor-trailers and to improve thermal mixing in refrigerated trailers was explored on full-scale tests. The active flow control technique that is being used relies on a modular system comprised of distributed, small, highly efficient actuators. These actuators, called synthetic jets, are jets that are synthesized at the edge of an orifice by a periodic motion of a piezoelectric diaphragm(s) mounted on one (or more) walls of a sealed cavity. The synthetic jet is zero net mass flux (ZNMF), but it allows momentum transfer to flow. It is typically driven near diaphragm and/or cavity resonance, and therefore, small electric input [O(10W)] is required. Another advantage of this actuator is that no plumbing is required. The system doesn't require changes to the body of the truck, can be easily reconfigured to various types of vehicles, and consumes small amounts of electrical power from the existing electrical system of the truck. The actuators are operated in a closed feedback loop based on inputs received from the tractor's electronic control unit, various system components and environmental sensors. The data are collected and processed on-board and transmitted to a cloud-based data management platform for further big data analytics and diagnostics. The system functions as a smart connected product through the interchange of data between the physical truck-mounted system and its cloud platform.

First investigation on the applicability of an active noise control system on a tracked tractor without cab

Directory of Open Access Journals (Sweden)

Daniele Pochi

2013-09-01

Full Text Available In last years, several research teams pointed their attention on the application of active noise control systems (ANC inside the cabs of agricultural tractor, with the purpose of reducing the driver exposition to noise, that is only partially controlled by the frame of the cab. This paper reports the results of a first experience that aimed at verifying the applicability of an ANC on a medium-high power, tracked tractor without cab. The tested tractor was a Fiat Allis 150 A, equipped with rear power take off, used in the execution of deep primary tillage in compact soils. It is a tracked tractor without cab, with maximum power of 108.8 kW at 1840 min–1 of the engine. The ANC consists of a control unit box based on a digital signal processor (DPS, two microphones, two speakers and a power amplifier. The instrumentation used in noise data collecting and processing consisted of a multichannel signal analyzer (Sinus - Soundbook, a ½” microphone capsule and an acoustic calibrator, both Bruel & Kjaer. The study aimed at evaluating the behaviour of the ANC by means of tests carried out under repeatable conditions, characterized by pre-defined engine speed values. Three replications have been made for each engine speed. The sampling time was 30 s. Two series of tests were performed in order to compare the results observed with the ANC on and off. The engine speed adopted in the study ranged from 600 min– 1, up to 2000 min–1 (maximum speed with steps of 100 min–1. The ANC proved to be effective in the interval of speed between 1400 and 1700 min–1, where the samplings have been intensified, adopting steps of 50 min–1. In such an interval, the attenuation observed with the ANC system on appeared evident both as weighed A sound pressure level (from 1.29 up to 2.46 dB(A and linear (from 4.54 up to 8.53 dB. The best performance has been observed at the engine speed of 1550 min–1, with attenuations, respectively of 2.46 dB(A and 7.67 d

Analysis of fatal accidents with tractors in the Centre of Portugal: Ten years analysis.

Science.gov (United States)

Antunes, Soraia M; Cordeiro, Cristina; Teixeira, Helena M

2018-06-01

Tractors have been described as one of the deadliest farming implements concerning agricultural activity. In Portugal, the scientific investigations about this problem are practically non-existent, with only statistical studies performed by entities related to road traffic safety, not in accordance to the study now performed, pinpointing the possibility of an underreporting of these accidents. This work aims to characterize the fatal tractor accidents in Portugal, autopsied at the Forensic Pathology Department of the Centre Branch of the National Institute of Legal Medicine and Forensic Sciences of Portugal, analysing several variables: gender, age, occupation, survival time, the victim position in the tractor, cause of death, toxicological and histological exams, year/month/day of the week, type of agricultural machine, existence of rollover protective structures (ROPS), type of accident, ground conditions, circumstantial information and geographic distribution of the accidents. All the autopsies between 2005 and 2014 were analysed. The victim profile corresponded to a man (89.5%), between 61 and 70 years old (33.3%), retired (43.9%), being the tractor driver (45.6%). In most of the cases, death occurred in less than 24h after the accident. These fatalities arose mainly in May and October. Rollover in sloping land was the most common type of accident, and cranioencephalic, thoracic and abdominal traumatic injuries were the main cause of death. In 16.2% of the cases, blood alcohol concentration was above the lower limit established in our road traffic law (accidents, and the corresponding circumstances that contributed to the death. Many barriers remain about this matter, but the Portuguese government begin to design several laws to prevent this type of accidents. Future investigations should be performed to understand the real dimension of tractor accidents in Portugal, and to comprehend the efficiency of laws implemented by the government. Copyright © 2018

The development and validation of an ergonomics index for assessing tractor operator work place

Directory of Open Access Journals (Sweden)

Juan Paulo Barbieri

2018-02-01

Full Text Available ABSTRACT: This study aimed to develop and validate an ergonomics index for the operator workplace assessment of agricultural tractors sold in the Brazilian market. To develop the ergonomics index, the operator work places were assessed for compliance with current, national and international, safety and ergonomics standards. The following standards were analyzed to develop ergonomics index: ISO 15077 (1996, which regulates the position of operator controls; ABNT NBR ISO 4254-1(2015 and ABNT NBR ISO 4252 (2011, which regulate the access to operator workplaces; and NR 12 (2010, which determines the mandatory items of operator workplaces.Thirty-four operator work places of 152 models of new agricultural tractors sold in the Brazilian market were analyzed in this study. Ergonomics index was developed and validated using these standards, and the findings enabled the ranking of agricultural tractors. Therefore, the proposed ergonomics index proved feasible and may be applied to other agricultural machines.

The mathematical model for the investigation of different influence factors on the economic and ecological indicators of a wheel tractor

Directory of Open Access Journals (Sweden)

Zakharchuk V.I.

2016-08-01

Full Text Available To solve the problem of oil deficit and reduce emissions of harmful substances from exhaust gases of vehicles alternative motor fuels, including biodiesel may by used. Most of wheel tractors are used as technological transport in agriculture, industry and municipal services. The article aims to clarify the mathematical model to determine the effect of the type of fuel used wheeled tractors on its performance. The mathematical model of the system "operator-wheel tractor-road" for the design research impact type of fuel on harmful emissions and fuel consumption wheeled tractor, is used as technological transport during its movement for driving cycle. Driving cycle showed main modes of motion there are acceleration, motion with constant speed and deceleration. The mathematical model allows to accurately consider peculiarities of the wheel tractor as the vehicle and engine describing its characteristics by polinomial dependencies. In mathematical models specified polynomial dependences that describe the fuel supply cycle indicated torque, fuel consumption and concentrations of main harmful substances in the exhaust gases of diesel during operation on diesel and biodiesel.

Procedure and layout for the development of a fatigue test on an agricultural implement by a four poster test bench

Directory of Open Access Journals (Sweden)

M. Cutini

2013-09-01

Full Text Available The increasing demand in agricultural vehicles’ power requirements, payloads and driving speeds increases issues related to tractors and farm implements exposure to solicitations. One of the main factors to be taken into account for fatigue test developing on agricultural machines is the heterogeneity of the environment and activity in which the tractor operates. In particular, for contractors the use in transport conditions both on terrain and road becomes important. As far as transport is concerned. factors mainly affecting solicitations on carried implement are soil profile roughness, tractor settings and forward speed. In this paper, CRA-ING laboratory of Treviglio, Italy, together with Frandent Group s.r.l. (Osasco, Italy, analyse the possibility of creating a solicitation profile by means of one four poster test bench for fatigue test on a carried implement simulating transport conditions. Accelerations at the hubs of the tractor were acquired during transport on terrain and reproduced with one electro-hydraulic four posters test bench on one dummy of a tractor developed for carrying the implement. Artificial bumps were mathematically created and introduced in the time history to simulate squares solicitations. Twelve hours of test were carried out. This experience confirmed the possibility of carrying out laboratory fatigue test on agricultural implements by reproducing specific field conditions solicitations with four poster test bench.

Simulação da estabilidade de tratores agrícolas 4x2 Simulation of the stability of 2wd agricultural tractors

Directory of Open Access Journals (Sweden)

Joseph Kalil Khoury Junior

2009-01-01

Full Text Available O objetivo do trabalho foi simular computacionalmente a estabilidade de tratores agrícolas 4x2. Experimentos de simulação foram realizados visando analisar o comportamento dinâmico de um trator agrícola 4x2 trabalhando em diferentes condições de operação e de terreno. Nas simulações em que se variaram as posições do trator sobre uma pista inclinada até o tombamento lateral, o ângulo de posição igual a 60º foi o de pior situação, o que corresponde ao trator descer por uma diagonal em pista inclinada para a esquerda. A bitola e a localização do centro de gravidade na vertical foram os fatores que mais afetaram a estabilidade do trator em tombamentos laterais. Já, a localização do centro de gravidade na longitudinal e a distância entre eixos afetaram mais a estabilidade do trator em tombamentos para trás. O trator deslizou os rodados do lado do tombamento ou perdeu a dirigibilidade dos pneus frontais com ângulos inferiores aos limites de estabilidade para tombamento.The objective of this work was to predict the loss of 2WD tractors stability. Simulations were done to analyze the dynamic behavior of an agricultural tractor working in different operation and surface conditions. Simulating different tractor positions on an inclined track until its side overturn, the tractor angle position of 60º presented the worst situation, what represented a tractor moving diagonally down on a left inclined track. Changing the tractor geometry and weight in the simulations, the vertical position of tractor central mass and its tread width were the parameters that most affected the tractor stability to side overturn. The longitudinal position of tractor central mass and the distance between its axes influenced on the tractor stability to rearward overturning. The tractor either slip the wheels at the side overturning or lost the front tire controlling at angles less than the overturning limits.

Gravity, two times, tractors, Weyl invariance, and six-dimensional quantum mechanics

International Nuclear Information System (INIS)

Bonezzi, R.; Latini, E.; Waldron, A.

2010-01-01

Fefferman and Graham showed some time ago that four-dimensional conformal geometries could be analyzed in terms of six-dimensional, ambient, Riemannian geometries admitting a closed homothety. Recently, it was shown how conformal geometry provides a description of physics manifestly invariant under local choices of unit systems. Strikingly, Einstein's equations are then equivalent to the existence of a parallel scale tractor (a six-component vector subject to a certain first order covariant constancy condition at every point in four-dimensional spacetime). These results suggest a six-dimensional description of four-dimensional physics, a viewpoint promulgated by the 2 times physics program of Bars. The Fefferman-Graham construction relies on a triplet of operators corresponding, respectively, to a curved six-dimensional light cone, the dilation generator and the Laplacian. These form an sp(2) algebra which Bars employs as a first class algebra of constraints in a six-dimensional gauge theory. In this article four-dimensional gravity is recast in terms of six-dimensional quantum mechanics by melding the 2 times and tractor approaches. This parent formulation of gravity is built from an infinite set of six-dimensional fields. Successively integrating out these fields yields various novel descriptions of gravity including a new four-dimensional one built from a scalar doublet, a tractor-vector multiplet and a conformal class of metrics.

Optical pulling force on a magneto-dielectric Rayleigh sphere in Bessel tractor polarized beams

International Nuclear Information System (INIS)

Mitri, F.G.; Li, R.X.; Yang, R.P.; Guo, L.X.; Ding, C.Y.

2016-01-01

The optical radiation force induced by Bessel (vortex) beams on a magneto-dielectric subwavelength sphere is investigated with particular emphasis on the beam polarization and order l (or topological charge). The analysis is focused on identifying the regions and some of the conditions to achieve retrograde motion of the sphere centered on the axis of wave propagation of the incident beam, or shifted off-axially. Exact non-paraxial analytical solutions are established, and computations for linear, circular, radial, azimuthal and mixed polarizations of the individual plane wave components forming the Bessel (vortex) beams by means of the angular spectrum decomposition method (ASDM) illustrate the theory with particular emphasis on the tractor (i.e. reversal) behavior of the force. This effect results in the pulling of the magneto-dielectric sphere against the forward linear momentum density flux associated with the incoming waves. Should some conditions related to the choice of the beam parameters as well as the permittivity and permeability of the sphere be met, the optical force vanishes and reverses sign. Moreover, the beam polarization is shown to affect differently the axial negative pulling force for either the zeroth- or the first-order Bessel beam. When the sphere is centered on the beam′s axis, the axial force component is always negative for the zeroth-order Bessel beam except for the radial and azimuthal polarization configurations. Nonetheless, for the first-order Bessel beam, the axial force is negative for the radial polarization case only. Additional tractor beam effects arise when the sphere departs from the center of the beam. It is also demonstrated that the tractor beam effect arises from the force component originating from the cross-interaction between the electric and magnetic dipoles. Potential applications are in particle manipulation, optical levitation, tractor beam tweezers, and other emergent technologies using polarized Bessel beams on

A New Skid Trail Pattern Design for Farm Tractors Using Linear Programing and Geographical Information Systems

Directory of Open Access Journals (Sweden)

Selcuk Gumus

2016-12-01

Full Text Available Farm tractor skidding is one of the common methods of timber extraction in Turkey. However, the absence of an optimal skidding plan covering the entire production area can result in time loss and negative environmental impacts. In this study, the timber extraction by farm tractors was analyzed, and a new skid trail pattern design was developed using Linear Programming (LP and Geographical Information Systems (GIS. First, a sample skidding operation was evaluated with a time study, and an optimum skidding model was generated with LP. Then, the new skidding pattern was developed by an optimum skidding model and GIS analysis. At the end of the study, the developed new skid trail pattern was implemented in the study area and tested by running a time study. Using the newly developed “Direct Skid Trail Pattern (DSTP” model, a 16.84% increase in working time performance was observed when the products were extracted by farm tractors compared to the existing practices. On the other hand, the average soil compaction value measured in the study area at depths of 0–5 cm and 5–10 cm was found to be greater in the sample area skid trails than in the control points. The average density of the skid trails was 281 m/ha, while it decreased to 187 m/ha by using the developed pattern. It was also found that 44,829 ton/ha of soil losses were prevented by using the DSTP model; therefore, environmental damages were decreased.

An investigation of drag reduction for tractor trailer vehicles with air deflector and boattail. [wind tunnel tests

Science.gov (United States)

Muirhead, V. U.

1981-01-01

A wind tunnel investigation was conducted to determine the influence of several physical variables on the aerodynamic drag of a trailer model. The physical variables included: a cab mounted wind deflector, boattail on trailer, flow vanes on trailer front, forced transition on trailer, and decreased gap between tractor and trailer. Tests were conducted at yaw angles (relative wind angles) of 0, 5, 10, 20, and 30 degrees and Reynolds numbers of 3.58 x 10 to the 5th power 6.12 x 10 to the 5th power based upon the equivalent diameter of the vehicles. The wind deflector on top of the cab produced a calculated reduction in fuel consumption of about 5 percent of the aerodynamic portion of the fuel budget for a wind speed of 15.3 km/hr (9.5 mph) over a wind angle range of 0 deg to 180 deg and for a vehicle speed of 88.5 km/hr (55 mph). The boattail produced a calculated 7 percent to 8 percent reduction in fuel consumption under the same conditions. The decrease in gap reduced the calculated fuel consumption by about 5 percent of the aerodynamic portion of the fuel budget.

A novel design procedure for tractor clutch fingers by using optimization and response surface methods

Energy Technology Data Exchange (ETDEWEB)

Dogan, Oguz; Karpat, Fatih; Yuce, Celalettin; Kaya, Necmettin; Yavuz, Nurettin [Uludag University, Gorukle (Turkmenistan); Sen, Hasan [Valeo A. S., Bursa (Turkmenistan)

2016-06-15

This paper presents a methodology for re-designing a failed tractor transmission component subjected to cyclic loading. Unlike other vehicles, tractors cope with tough working conditions. Thus, it is necessary to re-design components by using modern optimization techniques. To extend their service life, we present a design methodology for a failed tractor clutch power take-off finger. The finger was completely re-designed using topology and shape optimization approach. Stress-life based fatigue analyses were performed. Shape optimization and response surface methodology were conducted to obtain optimum dimensions of the finger. Two design parameters were selected for the design of experiment method and 15 cases were analyzed. By using design of the experiment method, three responses were obtained: Maximum stresses, mass, and displacement depending on the selected the design parameters. After solving the optimization problem, we achieved a maximum stress and mass reduction of 14% and 6%, respectively. The stiffness was improved up to 31.6% compared to the initial design.

Lubricant flow analysis for effective lubrication of tractor forward/reverse clutch

Directory of Open Access Journals (Sweden)

Daekyung Noh

2017-04-01

Full Text Available Owing to the high power requirements of tractors, their low-power transmission gears often experience durability problems such as burning of the clutch. The operation of tractors under high load conditions also causes clutch slip, with the consequent longer operation duration exacerbating the burning of the friction plate. Solving this problem requires effective lubricant distribution. This was achieved in the present study by the development of an analysis model for predicting the lubricant flow rate. The reliability of the model was verified by comparing its predictions for various operation conditions with experimental measurements. Using the model, it was determined that effective distribution of the lubricant could be achieved without significant modification of the system, by only adjusting the gaps between the clutch piston and the housing, and between the separation plates and the case. Keywords: Mechanical engineering

Chores at Times of Fatal or Serious Injuries Associated with Tractor Overturns with and without Rollover Protection

Directory of Open Access Journals (Sweden)

Henry P. Cole

2016-09-01

Full Text Available This study describes chores when farmers were either fatally or seriously injured and required emergency medical treatment as a result of overturns of tractors with or without rollover protective structures (ROPS. Data from the 2002 Kentucky Farm Tractor Overturn Survey were used for this study. The data were collected by a telephone survey of a population-based random sample of 6063 (7.98% of Kentucky’s 76,017 farm operators as listed in the Kentucky Agricultural Statistics Service database. Of farm operators interviewed, 551 (9.1% reported 603 overturns and 5512 (90.9% reported no overturns in the history of their farm, covering a period from 1925 to February 2002. Only the latest overturn was considered to improve recall accuracy. In addition, since the 1925 to 1959 time period had only 49 (8.1% of the overturns reported, (14 farmers did not provide the year of most recent overturn; only data from the 1960 to 2002 period (approximately 41 years were used. After making these adjustments, incidents evaluated included 25 cases (one fatal and four serious nonfatal injuries that involved ROPS-equipped tractor overturns and 88 cases (24 fatal and 64 serious nonfatal injuries that involved non-ROPS tractor overturns. Chores at highest risk for tractor overturns were identified for which educational and ROPS retrofit interventions could be emphasized. The highest frequency of overturn-related fatalities and nonfatal injuries were associated with hay harvesting, rotary mowing, and on-farm travel chores. These three chores represented 68.2% of fatal events and 50.0% of permanent and 56.6% of temporary disability overturn incidents. Tragically, in countries such as India and China with emerging mechanization, a large majority of tractors are produced without ROPS that can be expected to result in the same overturn-related epidemic of deaths experienced in highly mechanized countries, despite evidence of the protection provided by ROPS.

A method to evaluate the perceived ease of use of human-machine interface in agricultural tractors equipped with Continuously Variable Transmission (CVT)

Energy Technology Data Exchange (ETDEWEB)

Caffaro, F.; Bisaglia, C.; Cutini, M.; Cremasco, M.M.; Cavallo, E.

2017-07-01

At the end of the 20th century the adoption of the Continuously Variable Transmission (CVT) was one of the disruptive technological advances in agricultural tractors. Several changes in the Human Machine Interface (HMI) of the tractor cab have been introduced to accommodate this technology. HMIs are known to raise issues about their ease of use; however, this topic has been under-investigated in the agricultural sector. The present study introduces a method to investigate the perceived ease of use of the HMI of agricultural tractors equipped with technological innovations. The HMI required to manage a CVT tractor was evaluated by sixteen tractor drivers (8 novices and 8 experts). During the first contact with the machine and after having performed two targeted tasks with the tractor, participants filled in a questionnaire about the ease of use of the controls and of the touch-screen display, and evaluated the general perception of ease of use, safety, quality and solidity of the machine. The trial pointed out some significant differences between novices and experts, thus confirming the validity of the proposed method. In particular, novice users showed some difficulties when interacting for the first time with the HMI of the CVT tractor working station, whereas experts did not report similar difficulties. Thus, expertise seems to play a role in determining the quality of the interaction with the HMI. Training interventions should be designed to help novices in increasing their expertise effectively, avoiding effort and errors and improving user’s comfort and system performance.

A method to evaluate the perceived ease of use of human-machine interface in agricultural tractors equipped with Continuously Variable Transmission (CVT

Directory of Open Access Journals (Sweden)

Federica Caffaro

2018-02-01

Full Text Available At the end of the 20th century the adoption of the Continuously Variable Transmission (CVT was one of the disruptive technological advances in agricultural tractors. Several changes in the Human Machine Interface (HMI of the tractor cab have been introduced to accommodate this technology. HMIs are known to raise issues about their ease of use; however, this topic has been under-investigated in the agricultural sector. The present study introduces a method to investigate the perceived ease of use of the HMI of agricultural tractors equipped with technological innovations. The HMI required to manage a CVT tractor was evaluated by sixteen tractor drivers (8 novices and 8 experts. During the first contact with the machine and after having performed two targeted tasks with the tractor, participants filled in a questionnaire about the ease of use of the controls and of the touch-screen display, and evaluated the general perception of ease of use, safety, quality and solidity of the machine. The trial pointed out some significant differences between novices and experts, thus confirming the validity of the proposed method. In particular, novice users showed some difficulties when interacting for the first time with the HMI of the CVT tractor working station, whereas experts did not report similar difficulties. Thus, expertise seems to play a role in determining the quality of the interaction with the HMI. Training interventions should be designed to help novices in increasing their expertise effectively, avoiding effort and errors and improving user’s comfort and system performance.

A method to evaluate the perceived ease of use of human-machine interface in agricultural tractors equipped with Continuously Variable Transmission (CVT)

International Nuclear Information System (INIS)

Caffaro, F.; Bisaglia, C.; Cutini, M.; Cremasco, M.M.; Cavallo, E.

2017-01-01

At the end of the 20th century the adoption of the Continuously Variable Transmission (CVT) was one of the disruptive technological advances in agricultural tractors. Several changes in the Human Machine Interface (HMI) of the tractor cab have been introduced to accommodate this technology. HMIs are known to raise issues about their ease of use; however, this topic has been under-investigated in the agricultural sector. The present study introduces a method to investigate the perceived ease of use of the HMI of agricultural tractors equipped with technological innovations. The HMI required to manage a CVT tractor was evaluated by sixteen tractor drivers (8 novices and 8 experts). During the first contact with the machine and after having performed two targeted tasks with the tractor, participants filled in a questionnaire about the ease of use of the controls and of the touch-screen display, and evaluated the general perception of ease of use, safety, quality and solidity of the machine. The trial pointed out some significant differences between novices and experts, thus confirming the validity of the proposed method. In particular, novice users showed some difficulties when interacting for the first time with the HMI of the CVT tractor working station, whereas experts did not report similar difficulties. Thus, expertise seems to play a role in determining the quality of the interaction with the HMI. Training interventions should be designed to help novices in increasing their expertise effectively, avoiding effort and errors and improving user’s comfort and system performance.

Effect of Tractor Forward Speed on Sandy Loam Soil Physical ...

African Journals Online (AJOL)

Results indicate significant differences in soil physical conditions arising from different levels of tractor forward speed. A forward speed of approximately 7km/h resulted in appreciable amelioration of soil structure as reflected in improvements in the soil strength properties and maximum reduction in clod mean weight ...

Organizational and technological compatibility of the technological processes of second and third line maintenance of KhTZ-3522 tractors

Directory of Open Access Journals (Sweden)

Kyzminskyj Roman

2018-01-01

Full Text Available The work is devoted to systematic substantiation of productivity, production structure and specialization of service stations of KhTZ-3522 tractors. Based on the technical and economic comparative analysis of the results of the technological processes modeling of the second and third line maintenance of KhTZ-3522 tractors, the parametrical series of production structures of service stations both mono- and polytechnological specialization, which can work effectively in a wide range of the general annual program of orders, and in the conditions of seasonal fluctuations of orders for the maintenance of these tractors, are found. The results of calculations of the indicators system for organizational and technological compatibility of technological processes of the second and third line maintenance of KhTZ-3522 tractors in the joint technological flow are presented. The dependencies of these indicators on the total annual program of orders for service stations of different productivity are analyzed. According to the results of the analysis, the polytechnological specialization of such service stations is substantiated.

Life-cycle assessment of a Solar Assist Plug-in Hybrid electric Tractor (SAPHT) in comparison with a conventional tractor

International Nuclear Information System (INIS)

Mousazadeh, Hossein; Keyhani, Alireza; Javadi, Arzhang; Mobli, Hossein; Abrinia, Karen; Sharifi, Ahmad

2011-01-01

The most well-known reason of global warming is equivalent carbon dioxide (CO 2equ ) emitted from fossil fuels combustion in on-road and off-road vehicles. An appreciable portion of off-road pollution is allocated to farm implements. All cited studies have shown that renewable based electric vehicles (EVs) decrease petroleum consumption and consequently reduce criteria emissions under nearly all circumstances. Considering this, a Solar Assist Plug-in Hybrid electric Tractor (SAPHT) was designed, constructed and evaluated. This research evaluated the life cycle analysis of SAPHT project and compared the results with that of an internal combustion engine tractor (ICET). The life cycle was analyzed based on economical cost and environmental emissions. The externality of environmental pollutions was calculated to derive the life-cycle costs (LCC). The results showed that substituting each ICET by SAPHT can prevent 14 ton CO 2equ emission to atmosphere annually. Also it prevents a high volume of other emissions such as CO, NO x and PM 10 entering the atmosphere. LCC assessment emphasizes on economical effectiveness of SAPHT rather than ICET at any diesel fuel price, therefore, increasing fuel unit prices leads to more effectiveness. It is concluded that levelized cost of energy (LCE) in Euro /kW h for ICET is almost twice as that of SAPHT. Some of these advantages for SAPHT are offset in part by high purchase costs, heavy and massive batteries and low operating range.

Steering a Tractor by Means of an EMG-Based Human-Machine Interface

Directory of Open Access Journals (Sweden)

Sergio Alonso-Garcia

2011-07-01

Full Text Available An electromiographic (EMG-based human-machine interface (HMI is a communication pathway between a human and a machine that operates by means of the acquisition and processing of EMG signals. This article explores the use of EMG-based HMIs in the steering of farm tractors. An EPOC, a low-cost human-computer interface (HCI from the Emotiv Company, was employed. This device, by means of 14 saline sensors, measures and processes EMG and electroencephalographic (EEG signals from the scalp of the driver. In our tests, the HMI took into account only the detection of four trained muscular events on the driver’s scalp: eyes looking to the right and jaw opened, eyes looking to the right and jaw closed, eyes looking to the left and jaw opened, and eyes looking to the left and jaw closed. The EMG-based HMI guidance was compared with manual guidance and with autonomous GPS guidance. A driver tested these three guidance systems along three different trajectories: a straight line, a step, and a circumference. The accuracy of the EMG-based HMI guidance was lower than the accuracy obtained by manual guidance, which was lower in turn than the accuracy obtained by the autonomous GPS guidance; the computed standard deviations of error to the desired trajectory in the straight line were 16 cm, 9 cm, and 4 cm, respectively. Since the standard deviation between the manual guidance and the EMG-based HMI guidance differed only 7 cm, and this difference is not relevant in agricultural steering, it can be concluded that it is possible to steer a tractor by an EMG-based HMI with almost the same accuracy as with manual steering.

Performance of Single Axle Tractors in the Semi-Arid Central Part of ...

African Journals Online (AJOL)

user1

Performance evaluation of three single axle tractors namely Dongfeng15 hp and 12 hp ... On average the agricultural sector accounts for 42.9% gross domestic product and ..... a and b are constant(coefficient) with (+) or (-) sign shown table ...

Influence of biofuels usage in internal combustion engines of agricultural tractors on output parametrs

Directory of Open Access Journals (Sweden)

Tomáš Šmerda

2010-01-01

Full Text Available Application of alternative fuels brings the social benefits in terms of reducing dependence on oil industry and its products as well as decreasing of damage of the environment together with using of na­tu­ral resources, especially in field of renewable energy resources. The use of biofuels is the most important part of energy strategy in European Union, whose member states have agreed the content of biofuels will achieve 5.75% of the total energy sum of fuel for transport purposes in 2010. Operation of internal combustion engine fueled by RME brings environmental benefits as described several authors in analysis of the life cycle. The contribution deals with technical difficulties of the RME usage in internal combustion engine used in agricultural tractors. Different fuel causes different process of combustion which means changes in output power and pollution. The aim of this experiment was to determine these effects. Experimental work was divided into two parts according to various fuel systems. The first tractor was equipped with mechanical injection system, the second one was provided with common-rail fuel system. The test procedures consisted of measurement of power- torque curves where the engine load was created by Eddy current dynamometer. Exhaust gas analyzer sampled the pollution of carbon monoxide, carbon dioxide and hydrocarbons as the most important indicators of combustion process.

La normalización y certificación de tractores agrícolas en México

OpenAIRE

Alma Velia Ayala Garay; Rocío Cervantes Osornio; Marco Antonio Audelo Benítez; Noé Velázquez López; José Manuel Vargas Sállago

2013-01-01

El tractor agrícola es la principal fuente de potencia dentro de una unidad de producción. Por lo tanto para los usuarios de maquinaria agrícola, resulta una prioridad contar con mecanismos que permitan dar seguridad al usuario final o productor agrícola en el funcionamiento y calidad de los tractores, para esto el objetivo del presente es dar a conocer la evolución de la normalización y certificación de la maquinaria agrícola en México, sus impactos y tendencias, por medio de una descripción...

Process Approach for Modeling of Machine and Tractor Fleet Structure

Science.gov (United States)

Dokin, B. D.; Aletdinova, A. A.; Kravchenko, M. S.; Tsybina, Y. S.

2018-05-01

The existing software complexes on modelling of the machine and tractor fleet structure are mostly aimed at solving the task of optimization. However, the creators, choosing only one optimization criterion and incorporating it in their software, provide grounds on why it is the best without giving a decision maker the opportunity to choose it for their enterprise. To analyze “bottlenecks” of machine and tractor fleet modelling, the authors of this article created a process model, in which they included adjustment to the plan of using machinery based on searching through alternative technologies. As a result, the following recommendations for software complex development have been worked out: the introduction of a database of alternative technologies; the possibility for a user to change the timing of the operations even beyond the allowable limits and in that case the calculation of the incurred loss; the possibility to rule out the solution of an optimization task, and if there is a necessity in it - the possibility to choose an optimization criterion; introducing graphical display of an annual complex of works, which could be enough for the development and adjustment of a business strategy.

7 CFR 91.102 - Form of official identification symbols.

Science.gov (United States)

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Form of official identification symbols. 91.102... LABORATORY TESTING PROGRAMS SERVICES AND GENERAL INFORMATION Designation of Approved Symbols for Identification of Commodities Officially Tested By AMS § 91.102 Form of official identification symbols. Two...

Modelling and Simulation of a Hydrostatic Steering System for Agricultural Tractors

Directory of Open Access Journals (Sweden)

Barbara Zardin

2018-01-01

Full Text Available The steering system of a vehicle impacts on the vehicle performance, safety and on the driver’s comfort. Moreover, in off-road vehicles using hydrostatic steering systems, the energy dissipation also becomes a critical issue. These aspects push and motivate innovation, research and analysis in the field of agricultural tractors. This paper proposes the modelling and analysis of a hydrostatic steering system for an agricultural tractor to calculate the performance of the system and determine the influence of its main design parameters. The focus here is on the driver’s steering feel, which can improve the driver’s behavior reducing unnecessary steering corrections during the working conditions. The hydrostatic steering system is quite complex and involves a hydraulic circuit and a mechanical mechanism to transmit the steering to the vehicle tires. The detailed lumped parameters model here proposed allows to simulate the dynamic behavior of the steering system and to both enhance the understanding of the system and to improve the design through parameters sensitivity analysis.

Fuel consumption of tractor for different soil types in semi-arid regions; Consumo de combustivel de um trator agricola para diferentes tipos de solo em regioes semi-aridas

Energy Technology Data Exchange (ETDEWEB)

Montanha, Gustavo K. [Universidade Estadual Paulista (FAC/UNESP), Botucatu, SP (Brazil). Fac. de Ciencias Agronomicas. Dept. de Engenharia Rural], E-mail: gmontanha@fca.unesp.br; Guerra, Saulo P.S. [Universidade Estadual Paulista (UNESP), Botucatu, SP (Brazil). Dept. de Gestao e Tecnologia Agroindustrial; Andrade-Sanchez, Pedro; Heun, John [The University of Arizona, Maricopa, AZ (United States); Monteiro, Leonardo A. [The University of Arizona (MAC/UA), Maricopa, AZ (United States). Maricopa Agricultural Center

2010-07-01

The appropriate use of agricultural machinery enables greater operational efficiency and higher productivity for the farmer. Some factors such as soil type can influence the fuel consumption, one of the biggest costs. This study aimed to compare the fuel consumption of a tractor operating in two different conditions of soil in semi-arid regions. The area used for testing is located in the city of Maricopa, in Arizona, belonging to 'The University of Arizona'. The area 1 is classified as sandy clay loam soil (52% sand, 35% clay, 13% silt). The area 2 is classified as a sandy loam soil (71% sand, 12% clay and 17% silt). The tractor 4 x 2 TDA, with 88 kw (120 hp) engine power equipped with auto pilot system and an implement for tillage were used in the experiment. A data acquisition system was installed in the tractor to collect the data generated by the GPS and fuel consumption sensor. The results showed significant statistical difference in fuel consumption between soil textures. (author)

Truck Rollover Characterization for Class-8 Tractor-Trailers Utilizing Standard Dual Tires and New-Generation Single Tires

Energy Technology Data Exchange (ETDEWEB)

Capps, Gary [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). National Transportation Research Center; Knee, Bill [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). National Transportation Research Center; Franzese, Oscar [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). National Transportation Research Center; Pollock, Paul [Dana Corporation, Kalamazoo, MI (United States). Commercial Vehicle Systems Division; Coleman, Daniel [Dana Corporation, Kalamazoo, MI (United States). Commercial Vehicle Systems Division; Janajreh, Ibrahim [Michelin Americas Research and Development Corporation, Greenville, SC (United States); Haas, Steven [Michelin Americas Research and Development Corporation, Greenville, SC (United States); Frey, Norm [Michelin Americas Research and Development Corporation, Greenville, SC (United States); Law, Harry [Clemson Univ., SC (United States). Fluor Daniel Engineering Innovation Building; Johnson, Eric [Clemson Univ., SC (United States). Fluor Daniel Engineering Innovation Building; Lawson, Robert [Clemson Univ., SC (United States). Fluor Daniel Engineering Innovation Building; Petrolino, Joe [National Transportation Research Center, Inc., Knoxville, TN (United States); Rice, Dave [National Transportation Research Center, Inc., Knoxville, TN (United States)

2005-07-30

The Heavy Truck Rollover Characterization Project is a major research effort conducted by the National Transportation Research Center, Inc. (NTRCI) in partnership with Oak Ridge National Laboratory (ORNL), Dana Corporation (Dana), Michelin Americas Research and Development Corporation (Michelin) and Clemson University (Clemson), under the NTRCIs Heavy Vehicle Safety Research Center (HVSRC) for the Federal Highway Administration (FHWA). ORNL provided the day-to-day management of the project. The expertise mix of this team coupled with complementary research needs and interests, and a positive can-do attitude provided an extremely positive experimental research opportunity for all involved. Furthermore, this team supplied significant and valuable resources that provided a strong positive benchmark regarding the ability to conduct research within a public-private partnership. The work conducted by this team focused on initial efforts to generate data and information on heavy truck rollover not currently available in the industry. It reflects efforts within Phases 1 and 2 of a longer-term four-phase research program. A 1999 Peterbilt 379 class-8 tractor and 2004 Wabash dry freight van trailer were the test vehicles utilized in this effort. Both were instrumented with a number of sensors to capture the dynamics of the tractor and trailer as it engaged in various testing maneuvers that included: an evasive maneuver, swept sine, constant radius, and a run-off-the-road maneuver. The run-off-the-road maneuver was discontinued because the test track could not safety accommodate such a maneuver. These maneuvers were carried out utilizing both standard dual tires and new-generation dual tires in six test series. Two test series also included the use of a wider-slider suspension. Outriggers were placed on the test vehicle to assure that an actual rollover would not occur, however, the tests were designed to generate lift-off of tires during the tests. One of the main objectives

Design, Construction and Evaluation of an Interchangeable Digital System to Measure Slip and Ground Speed of Existing 2WD Tractors in Iran

Directory of Open Access Journals (Sweden)

M Khosravi

2012-05-01

Full Text Available The majority of existing tractors in Iran are not equipped with any tools to measure and display slip and ground speed. This is mainly due to the lack of national standards for measuring tools and instruments of tractors. In current research, an interchangeable system for two wheel drive tractors has been designed. Furthermore, it has been assessed after construction. To measure actual and theoretical ground speed, four rotary encoders for sensing the rotation of front and rear wheels have been utilized. Slip and ground speed were measured by means of software which has been developed in an ATmega16PU microprocessor. The measured slip and speed are digitally displayed on tractor dashboard. To evaluate the performance of the system, the measured values of ground speed and slip were compared with their calculated values obtained from conventional method. The Micro-controller has been programmed in such a way that the effect of front wheel sliding on slip is eliminated. In all evaluation conditions (in field and on asphalt, the maximum difference between system measurements for slip and speed and calculated slip and speed via conventional method was 2.4% and 0.2 km h-1, respectively. With slight alteration this system can be fitted on any kind of exiting two wheel drive tractors in the country.

A History of the Caterpillar Tractor Company's Use of Motion Pictures.

Science.gov (United States)

Veeder, Gerry A.

Film historians have tended to overlook the industrial film even though it has been widely used as a sales tool since early in this century. The Caterpillar Tractor Company was one of the first to adopt this medium as a means of demonstrating what its machines could do in a variety of situations. While other types of films have been made by…

Analysis of swirl recovery vanes for increased propulsive efficiency in tractor propeller aircraft

NARCIS (Netherlands)

Veldhuis, L.L.M.; Stokkermans, T.C.A.; Sinnige, T.; Eitelberg, G.

2016-01-01

In this paper we address a preliminary assessment of the performance effects of swirl recovery vanes (SRVs) in a installed and uninstalled tractor propeller arrangement. A numerical analysis was performed on a propeller and a propeller-wing configuration after the SRVs were optimized first in a

MATHEMATICAL MODEL AND METHODOLOGY FOR CALCULATION OF MINIMIZATION ON TURNING RADIUS OF TRACTOR UNIT WITH REPLACEABLE SUPPORTING AND MANEUVERING DEVICE

Directory of Open Access Journals (Sweden)

P. V. Zeleniy

2016-01-01

Full Text Available Smooth plowing with the help of reversible plows has replaced an enclosure method of soil treatment. The method may cause a formation of back ridges or open furrows. Due to this fact turnings of a tractor unit with a minimum radius required in order to ensure shuttle movements each time in the furrow of the preceding operating stroke have become a dominant type of turnings. Non-productive shift time is directly dependent on them and it is on the average 10–12 %, and it is up to 40 % in small contour areas with short run. Large non-productive time is connected with the desire to reduce headland width at field edges, and then a turning is made in several stages while using a complicated maneuvering. Therefore, an increase in efficiency of a plowing unit by means of minimization on its turning radius and execution of turning at one stage in the shortest possible time are considered as relevant objectives. In such a case it is necessary to take into account the fact that potential capabilities of universal tractors having established time-proved designs in respect of reduction of turning radius are practically at the end. So it is expedient to solve the matter at the expense of additional removable devices that ensure transformation of tractor wheel formula at the run end in order to reorient its position. Finally high quality plowing ensured by future-oriented reversible plows will be accompanied not only by output increase per shift, but also by decrease in headland width, their compaction and abrasion due to suspension systems and increase in productivity. The developed design having a novelty which proved by an invention patent and representing an additional supporting and maneuvering device significantly minimizes all the above-mentioned disadvantages and does not require any changes in tractor production design. Investigations have been carried on the following topic: “Minimization of turning radius for universal tractors by transformation

Testing Black Market vs. Official PPP: A Pooled Mean Group Estimation Approach

OpenAIRE

Goswami, Gour Gobinda; Hossain, Mohammad Zariab

2013-01-01

Testing purchasing power parity (PPP) using black market exchange rate data has gained popularity in recent times. It is claimed that black market exchange rate data more often support the PPP than the official exchange rate data. In this study, to assess both the long run stability of exchange rate and the short run dynamics, we employ Pooled Mean Group (PMG) Estimation developed by Pesaran et al. (1999) on eight groups of countries based on different criteria. Using the famous Reinhart and ...

Palm biodiesel: performance of a agricultural tractor in function of differents storage periods; Biodiesel de dende: desempenho de trator agricola em funcao de diferentes periodos de armazenamento

Energy Technology Data Exchange (ETDEWEB)

Lopes, Afonso; Oliveira, Melina C.J. [Universidade Estadual Paulista Julio de Mesquita Filho (FCAV/UNESP), Jaboticabal, SP (Brazil). Fac. de Ciencias Agrarias e Veterinarias. Dept. de Engenharia Rural], email: fonso@fcav.unesp.br; Lima, Leomar P. [Instituto Federal do Triangulo Mineiro (IFTM), Uberlandia, MG (Brazil); Camara, Felipe P. [Universidade Federal do Ceara (UFC), Cariri, CE (Brazil)

2011-07-01

The use of biofuel for replacement of oil in internal combustion engines is an alternative to seek the reduction of harmful effects that the use of these fuels question to the environment. The objective of this work was to evaluate the performance of a tractor in the light of storage time of the biodiesel of palm oil. The experiment was conducted in the Laboratory of machinery and agricultural mechanization of Rural Engineering Department of UNESP, Jaboticabal, SP. In this study, -if a tractor Valtra BM 110 4x2 TDA 74 kW (100 cv) in engine 2.350 rpm. The experimental design was completely randomized, in factorial scheme 5x3, with 3 repetitions. The first factor represents 5 proportions of mixing biodiesel for diesel (B0, B5, B25, B 50 and B100, that the number indicates the percentage of biodiesel for diesel) and three storage times in condition storage environment in a rural property (0, 3 and 6 months). The mixtures were prepared hours before the test. The results showed that the storage time did not influence the performance of the tractor, occurring biodiesel specific increase in consumption from the proportion of 25% (B25) mixture of biodiesel for diesel. (author)

A simulation test of the impact on soil moisture by agricultural ...

African Journals Online (AJOL)

To study the impact by agricultural machinery on changes in soil moisture, we used a simulated test method employing round iron plate based on the ground pressure ratio between the front and rear wheels of wheeled tractors and crawler tractors. We conducted soil compactions with five pressure loads (35, 98, 118, 196 ...

The U.S. Department of Labor's Tractor and Machinery Certification Program: management styles and perceptions held by community stakeholders and instructors.

Science.gov (United States)

Jepsen, S D

2012-07-01

A mixed-mode, descriptive study was conducted on the U.S. Department of Labor's (DOL) Tractor and Machinery Certification Program. Legislated by the Fair Labors Standards Act, the Hazardous Occupations Order in Agriculture (HOOA) was enacted in 1968 as a public policy measure to reduce the number of injuries to youth on farms. An educational exemption allows youth 14 and 15 years of age to work for hire after they successfully complete a training program. In the 40+ years since the legislation went into effect prescribing such training exemptions, deficiencies and variations have occurred in the quality of the educational program and the system by which agencies certify young people. To gain a better understanding of the DOL Tractor and Machinery Certification program, community stakeholders were asked to identify management practices, curriculum resources, and perceptions of the DOL program. The study design used qualitative data from 49 agricultural representatives participating in regional focus groups and quantitative data from 330 community instructors responding to an electronic-formatted questionnaire (representing a 70.7% response rate) in an effort to answer the question: "What is the current status of the DOL Tractor and Machinery Certification program in the United States?" The findings revealed that 55.2% of the instructors taught a qualifying DOL program. Of these, the certification was administered through an Extension or 4-H program (68.7%), an agricultural education program (24.7%), or as a combination of Extension and agricultural education (6.0%). Course instructors believed the training was beneficial to students and had opportunity to attract more students than currently enrolled These instructors placed a higher value on standardized teaching materials than on standardized testing procedures; they also supported the need for additional teaching aids, which included hands-on activities, videotapes, student workbooks, and DVDs. Study participants

Operational performance of agricultural tractor in function of interior and metropolitano diesel mixture in mamona biodiesel

Energy Technology Data Exchange (ETDEWEB)

Tabile, Rubens Andre [Universidade de Sao Paulo (EESC/USP), Sao Carlos, SP (Brazil). Escola de Engenharia; Lopes, Afonso; Toledo, Anderson de; Reis, Gustavo Naves dos; Silva, Rouverson Pereira da [Universidade Estadual Paulista (DER/UNESP), Jaboticabal, SP (Brazil). Dept. de Engenharia Rural

2008-07-01

The great demand for energy sources by production systems allied to scarcity of fossil fuels has motivated the development and production of biodiesel, this is a fuel produced from renewable sources. Given that, the objective of this study was to compare the operating performance of an agricultural tractor, operating with interior and metropolitano diesel mixed to mamona biodiesel, in seven proportions. The tests were conducted in the Departamento de Engenharia Rural of UNESP/Jaboticabal - SP. The results showed that the kind of diesel did influence fuel consumption, and diesel metropolitano showed best quality. It was also observed that as biodiesel proportion increased, fuel consumption increased as well. (author)

Generating a stationary infinite range tractor force via a multimode optical fibre

Science.gov (United States)

Ebongue, C. A.; Holzmann, D.; Ostermann, S.; Ritsch, H.

2017-06-01

Optical fibres confine and guide light almost unattenuated and thus convey light forces to polarizable nano-particles over very long distances. Radiation pressure forces arise from scattering of guided photons into free space while gradient forces are based on coherent scattering between different fibre modes or propagation directions. Interestingly, even scattering between co-propagating modes induces longitudinal forces as the transverse confinement of the light modes creates mode dependent longitudinal wave-vectors and photon momenta. We generalize a proven scattering matrix based approach to calculate single as well as inter-particle forces to include several forward and backward propagating modes. We show that an injection of the higher order mode only in a two mode fibre will induce a stationary tractor force against the injection direction, when the mode coupling to the lower order mode dominates against backscattering and free space losses. Generically this arises for non-absorbing particles at the centre of a waveguide. The model also gives improved predictions for inter-particle forces in evanescent nanofibre fields as experimentally observed recently. Surprisingly strong tractor forces can also act on whole optically bound arrays.

[Accident prevention in agriculture in the ASL1 Abruzzo Local Health Service: protection facilities for tractors].

Science.gov (United States)

Pompei, Domenico; Rossi, Roberta; Vecchiola, Rita; Angelone, Anna Maria; Fabiani, Leila

2015-07-08

The ASL1 workplace prevention and safety service in Abruzzo has been conducting workplace inspections on agricultural and livestock farms in the province of L'Aquila since 2011, mainly in the areas of Avezzano, Sulmona and L'Aquila. The agricultural sector in Abruzzo is characterized by high rates of accidents and the ratio of fatal injuries/total injuries is higher than the industry and services sector. To evaluate the presence or absence of safety devices , i.e. compliance or otherwise with regulations for tractors, and of any variable factor that could be associated with the safety of the vehicle. Between 2011 and 2013, 98 farms in the province of L'Aquila were inspected. The data resulting from the inspections was collected by the use of a checklist. An univariate logistic regression analysis was conducted in which the vehicles that complied with regulations were considered as the dependant variable, and the age of the tractor owner, the acres of worked land and the type of farm were considered as explanatory variables. Statistical elaboration was carried out using the Stata 12 programme. Out of a total of 298 tractors that were checked, 64.8% did not comply with regulations due to absence or unsuitability of one or more safety devices such as: a protective device in case of overturning; retention system of the driver; mounting and dismounting from the vehicle; protection of moving parts and hot parts; PTO (Power Take Off) protection device. A significant association between non-compliance of vehicles and the age of the owner and acres worked was observed, whereas no statistical significance was observed for the association with the farm type variable. Our study showed that farms where the owner's age is between 50 and 64 years and where more acres of land are worked are those where the agricultural or forestry tractors had lower levels of compliance with regulations.

Vision in high-level football officials.

Science.gov (United States)

Baptista, António Manuel Gonçalves; Serra, Pedro M; McAlinden, Colm; Barrett, Brendan T

2017-01-01

Officiating in football depends, at least to some extent, upon adequate visual function. However, there is no vision standard for football officiating and the nature of the relationship between officiating performance and level of vision is unknown. As a first step in characterising this relationship, we report on the clinically-measured vision and on the perceived level of vision in elite-level, Portuguese football officials. Seventy-one referees (R) and assistant referees (AR) participated in the study, representing 92% of the total population of elite level football officials in Portugal in the 2013/2014 season. Nine of the 22 Rs (40.9%) and ten of the 49 ARs (20.4%) were international-level. Information about visual history was also gathered. Perceived vision was assessed using the preference-values-assigned-to-global-visual-status (PVVS) and the Quality-of-Vision (QoV) questionnaire. Standard clinical vision measures (including visual acuity, contrast sensitivity and stereopsis) were gathered in a subset (n = 44, 62%) of the participants. Data were analysed according to the type (R/AR) and level (international/national) of official, and Bonferroni corrections were applied to reduce the risk of type I errors. Adopting criterion for statistical significance of pfootball officials were similar to published normative values for young, adult populations and similar between R and AR. Clinically-measured vision did not differ according to officiating level. Visual acuity measured with and without a pinhole disc indicated that around one quarter of participants may be capable of better vision when officiating, as evidenced by better acuity (≥1 line of letters) using the pinhole. Amongst the clinical visual tests we used, we did not find evidence for above-average performance in elite-level football officials. Although the impact of uncorrected mild to moderate refractive error upon officiating performance is unknown, with a greater uptake of eye examinations, visual

Preservatives and neutralizing substances in milk: analytical sensitivity of official specific and nonspecific tests, microbial inhibition effect, and residue persistence in milk

Directory of Open Access Journals (Sweden)

Livia Cavaletti Corrêa da Silva

2015-09-01

Full Text Available Milk fraud has been a recurring problem in Brazil; thus, it is important to know the effect of most frequently used preservatives and neutralizing substances as well as the detection capability of official tests. The objective of this study was to evaluate the analytical sensitivity of legislation-described tests and nonspecific microbial inhibition tests, and to investigate the effect of such substances on microbial growth inhibition and the persistence of detectable residues after 24/48h of refrigeration. Batches of raw milk, free from any contaminant, were divided into aliquots and mixed with different concentrations of formaldehyde, hydrogen peroxide, sodium hypochlorite, chlorine, chlorinated alkaline detergent, or sodium hydroxide. The analytical sensitivity of the official tests was 0.005%, 0.003%, and 0.013% for formaldehyde, hydrogen peroxide, and hypochlorite, respectively. Chlorine and chlorinated alkaline detergent were not detected by regulatory tests. In the tests for neutralizing substances, sodium hydroxide could not be detected when acidity was accurately neutralized. The yogurt culture test gave results similar to those obtained by official tests for the detection of specific substances. Concentrations of 0.05% of formaldehyde, 0.003% of hydrogen peroxide and 0.013% of sodium hypochlorite significantly reduced (P

Smoke opacity in agricultural tractor in function of interior and metropolitano diesel mixture in mamona biodiesel

Energy Technology Data Exchange (ETDEWEB)

Tabile, Rubens Andre [Universidade de Sao Paulo (EESC/USP), Sao Carlos, SP (Brazil). Escola de Engenharia; Lopes, Afonso; Camara, Felipe Thomas da; Grotta, Danilo Cesar Checchio; Furlani, Carlos Eduardo Angeli [Universidade Estadual Paulista (DER/UNESP), Jaboticabal, SP (Brazil). Dept. de Engenharia Rural

2008-07-01

The great demand for energy sources by production systems allied to scarcity of fossil fuels has motivated the development and production of biodiesel, which is a fuel produced from renewable sources. Given that, the aim of this study was to compare smoke opacity of an agricultural tractor engine, working with metropolitano and interior diesel mixed to mamona biodiesel, in seven proportions. The tests were conducted in the Departamento de Engenharia Rural of UNESP/Jaboticabal - SP. The results showed that the diesel type did influence opacity of smoke, and metropolitano diesel showed best quality. It was also observed that, as biodiesel proportion increased, smoke opacity decreased until B75, turning to increase to B100. (author)

NAGWS Softball Guide 1989. Official Rules/Officiating.

Science.gov (United States)

Matson, Janis

This booklet, written for coaches of women's softball teams, contains the official National Association for Girls and Women in Sports (NAGWS) rules for the game. Recent rule modifications are included. Statements of philosophy and standards for NAGWS officials are also included. (JD)

Sports officials and officiating : Science and practice

NARCIS (Netherlands)

MacMahon, Clare; Mascarenhas, Duncan; Plessner, Henning; Pizzera, Alexandra; Oudejans, Raôul R D; Raab, Markus

2014-01-01

Sports officials (umpires, referees, judges) play a vital role in every sport, and sports governing bodies, fans, and players now expect officials to maintain higher professional standards than ever before. In this ground-breaking book, a team of leading international sport scientists and top level

Evaluation of the biological methane potential of various feedstock for the production of biogas to supply agricultural tractors

International Nuclear Information System (INIS)

Matuszewska, Anna; Owczuk, Marlena; Zamojska-Jaroszewicz, Anna; Jakubiak-Lasocka, Joanna; Lasocki, Jakub; Orliński, Piotr

2016-01-01

Highlights: • Biochemical methane potential for mixtures of whey, manures and silages was tested. • High impact of feedstock type on composition and yield of biogas was observed. • Simple mathematical model of methanogenic fermentation was proposed. • Exhaust emissions from dual fuel (biogas and diesel oil) engine were investigated. • Using biogas in engine reduces particulate matter and nitrogen oxides emissions. - Abstract: This work is divided into three parts. The first one presents results of biological methane potential of agriculture raw materials available in Poland. In the second part the simple mathematical model of methanogenic fermentation is proposed. The data for this model were obtained from experimental digestion process of chosen mixtures. Last part includes the results of research of exhaust emissions generated by dual dual-fuel engine of agricultural tractor powered by mixture of model biogas (60% and 70% of methane) and diesel oil. The obtained results revealed that there was a significant difference in chemical composition and yield of biogas between considered feedstock types. The highest biogas and methane production was obtained for mixtures in ratio of 6:4 for swine manure/maize silage and whey/grass silage. Due to agriculture conditions in Poland and obtain results, the maize silage and swine manure were chosen to development of mathematical model of fermentation process. It showed a satisfactory match to the experimental results. Results of emission tests on dual-fuel tractor engine supplied with biogas and diesel oil showed the higher concentrations of hydrocarbons and carbon oxide and lower concentrations of particulate matter in exhaust gases. Level of emission of particular components depends on the biogas composition.

Vision in high-level football officials.

Directory of Open Access Journals (Sweden)

António Manuel Gonçalves Baptista

23.9% wear contact lenses when officiating. Clinical vision measures in the football officials were similar to published normative values for young, adult populations and similar between R and AR. Clinically-measured vision did not differ according to officiating level. Visual acuity measured with and without a pinhole disc indicated that around one quarter of participants may be capable of better vision when officiating, as evidenced by better acuity (≥1 line of letters using the pinhole. Amongst the clinical visual tests we used, we did not find evidence for above-average performance in elite-level football officials. Although the impact of uncorrected mild to moderate refractive error upon officiating performance is unknown, with a greater uptake of eye examinations, visual acuity may be improved in around a quarter of officials.

Vibration energy absorption in the whole-body system of a tractor operator

OpenAIRE

Jan Szczepaniak; Wojciech Tanaś; Jacek Kromulski

2014-01-01

Many people are exposed to whole-body vibration (WBV) in their occupational lives, especially drivers of vehicles such as tractor and trucks. The main categories of effects from WBV are perception degraded comfort interference with activities-impaired health and occurrence of motion sickness. Absorbed power is defined as the power dissipated in a mechanical system as a result of an applied force. The vibration-induced injuries or disorders in a substructure of the human system are primari...

Repair and maintenance costs of 4WD tractors and self propelled combine harvesters in Italy

Directory of Open Access Journals (Sweden)

Aldo Calcante

2013-09-01

Full Text Available Purchasing and maintaining tractors and operating machines are two of the most considerable costs of the agricultural sector, which includes farm equipment manufacturers, farm contractors and farms. In this context, repair and maintenance costs (R&M costs generally constitute 10-15% of the total costs related to agricultural equipment and tend to increase with the age of the equipment; hence, an important consideration in farm management is the optimal time for equipment replacement. Classical, R&M cost estimation models, calculated as a function of accumulated working hours, are usually developed by ASAE/ASABE for the United States operating conditions. However, R&M costs are strongly influenced by farming practices, operative conditions, crop and soil type, climatic conditions, etc. which can be specific for individual countries. In this study, R&M cost model parameters were recalculated for the current Italian situation. For this purpose, data related to the R&M costs of 100 4WD tractors with engine power ranging from 59 to 198 kW, and of 20 SP combine harvesters (10 straw walkers combines and 10 axial flow combines with engine power ranging from 159 to 368 kW working in Italy were collected. According to the model, which was obtained by interpolating the data through a two-parameter power function (proposed by ASAE/ASABE, the R&M cost incidence on the list price of Italian tractors at 12,000 working hours (estimated life of the machines was 48.6%, as compared with 43.2% calculated through the most recent U.S. model while, for self propelled combine harvesters, the R&M cost incidence at 3,000 working hours was 23.1 % as compared with 40.2% calculated through the same U.S. model.

Analisi delle vibrazioni su trattori agricoli in normali condizioni di lavoro e in condizioni predefinite - Vibration analysis on agricultural tractors in normal working conditions and in predetermined conditions

Directory of Open Access Journals (Sweden)

Alessandro Peretti

2015-10-01

Full Text Available Commentata la diffusione dei trattori agricoli in Italia e svolta una rassegna degli effetti delle vibrazioni sui trattoristi, sono riportati i valori delle accelerazioni riscontrati nel nostro Paese, nonché i livelli di esposizione degli operatori. Individuati i parametri che determinano le vibrazioni, sono illustrati gli interventi in grado di contenerle. Sono inoltre riportati i risultati di una ricerca su tre trattori agricoli: i rilievi delle vibrazioni triassiali sul piano e sul basamento del sedile e le misure del rumore in prossimità di ambedue gli orecchi dell’operatore sono stati eseguiti durante l’aratura, l’erpicatura e la traslazione su strada sterrata e asfaltata, a diverse velocità di avanzamento e a differenti valori di pressione di gonfiaggio degli pneumatici. ------ After the assessment of the agricultural tractors fleet characteristics in Italy and a review of the effects of vibration on tractor drivers, the typical acceleration values and consequent operators’ exposure levels in carrying out agricultural operations are reported. Once having ascertained the parameters that produce the vibrations, the actions more suitable to reduce the risk factors are shown. The results of a series of comparative tests on three used tractors of different age are then reported: the levels of tri-axial vibrations on the seat cushion and base and of the noise at both operator’s ears were recorded during ploughing, harrowing and driving on farm and paved roads, at different speeds and varying the tyres inflation pressure.

Matching design and performance analysis for driving system of solar garden tractor%太阳能园艺拖拉机驱动系统匹配设计与性能分析

Institute of Scientific and Technical Information of China (English)

张超; 朱思洪; 王军洋; 高辉松; 邓晓亭

2015-01-01

Solar garden tractor not only drives tractor, but also does some garden works, and its driving system has unique requirement. A design method for driving system of solar garden tractor was put forward, which included the overall design and the main parameters of the theoretical calculation. Firstly, for the wheel drive mode’s power transmission chain was short, and its driving and braking force distribution could be controlled and optimized by the energy management and power system, which was helpful to improve the drive system’s efficiency, extend operation time and increase mileage, the wheel drive mode was therefore chosen as solar tractor drive system. Secondly, the components of solar tractor included the hub motor, the moving motor, the reducer, the battery pack and the photovoltaic panel. In order to evaluate solar tractor’s working capacity, the cumulative operation time throughout day was proposed as the evaluation index. The cumulative operation time throughout day refered to the sum of solar tractor working time in a day after the battery was fully charged. According to the principle of solar tractor, i.e. obtained total energy is equal to consumed energy by the tractor, calculate the cumulative operation time throughout day. The obtained total energy by solar tractor was composed of photovoltaic panel output total energy throughout day and battery rated output energy. Based on a large number of test and analysis on solar radiation intensity and environment temperature on horizontal plane in Nanjing, solar radiation intensity model and environment temperature model were established under cloudless weather throughout the day to describe climate change. According to the parameters of photovoltaic panel, solar radiation intensity and environment temperature, the photovoltaic panel’sP-Voutput characteristic curve was obtained, and based on the peak power of photovoltaic panel, total output energy values of 4 photovoltaic panels were calculated to be

Finding official British information official publishing in the digital age

CERN Document Server

Inman, Jane; Purushothama, B

2011-01-01

Examining the different bodies that publish official material, this book describes the types of material published, how it is made available and how it is recorded. Finding Official British Information focuses on the digital availability of official information and considers how much is now freely available on the web and how to locate it as well as addressing issues of web only publishing. It covers public bodies in the UK and includes publications issued by central and local government as well as the devolved assemblies and the many other organisations that issue official publications. Quick 'how to find' section for each area Designed for the non-specialist Covering central and local government, the devolved assemblies and other public bodies in the UK.

Enhanced fuel efficiency on tractor-trailers using synthetic jet-based active flow control

Science.gov (United States)

Amitay, Michael; Menicovich, David; Gallardo, Daniele

2016-04-01

The application of piezo-electrically-driven synthetic-jet-based active flow control to reduce drag on tractor-trailers was explored experimentally in wind tunnel testing as well as full-scale road tests. Aerodynamic drag accounts for more than 50% of the usable energy at highway speeds, a problem that applies primarily to trailer trucks. Therefore, a reduction in aerodynamic drag results in large saving of fuel and reduction in CO2 emissions. The active flow control technique that is being used relies on a modular system comprised of distributed, small, highly efficient actuators. These actuators, called synthetic jets, are jets that are synthesized at the edge of an orifice by a periodic motion of a piezoelectric diaphragm(s) mounted on one (or more) walls of a sealed cavity. The synthetic jet is zero net mass flux (ZNMF), but it allows momentum transfer to flow. It is typically driven near diaphragm and/or cavity resonance, and therefore, small electric input [O(10W)] is required. Another advantage of this actuator is that no plumbing is required. The system doesn't require changes to the body of the truck, can be easily reconfigured to various types of vehicles, and consumes small amounts of electrical power from the existing electrical system of the truck. Preliminary wind tunnel results showed up to 18% reduction in fuel consumption, whereas road tests also showed very promising results.

The development and validation of an ergonomics index for assessing tractor operator work place

OpenAIRE

Barbieri, Juan Paulo; Schlosser, José Fernando; Farias, Marcelo Silveira de; Negri, Giácomo Müller; Oliveira, Luis Fernando Vargas de

2018-01-01

ABSTRACT: This study aimed to develop and validate an ergonomics index for the operator workplace assessment of agricultural tractors sold in the Brazilian market. To develop the ergonomics index, the operator work places were assessed for compliance with current, national and international, safety and ergonomics standards. The following standards were analyzed to develop ergonomics index: ISO 15077 (1996), which regulates the position of operator controls; ABNT NBR ISO 4254-1(2015) and ABNT ...

29 CFR 2703.2 - Designated agency ethics official and alternate designated agency ethics official.

Science.gov (United States)

2010-07-01

... 29 Labor 9 2010-07-01 2010-07-01 false Designated agency ethics official and alternate designated agency ethics official. 2703.2 Section 2703.2 Labor Regulations Relating to Labor (Continued) FEDERAL... agency ethics official and alternate designated agency ethics official. The Chairman shall appoint an...

31 CFR 0.104 - Designated Agency Ethics Official and Alternate Designated Agency Ethics Official.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Designated Agency Ethics Official and Alternate Designated Agency Ethics Official. 0.104 Section 0.104 Money and Finance: Treasury Office of the... Responsibilities § 0.104 Designated Agency Ethics Official and Alternate Designated Agency Ethics Official. The...

Analytical evaluation of the protection offered by sealed tractor cabins during crop pulverization with fenitrothion.

Science.gov (United States)

Barcellos, Michelle; Faletti, Milena Michele; Madureira, Luiz Augusto Dos Santos; Bauer, Fernando Cesar

2016-12-01

The practice of large-scale agriculture requires the use of pesticides in order to maximize production. This activity has gained increasing attention in recent years, especially from rural workers, due to the risks associated with long-term exposure to pesticides. To minimize these risks, personal protection equipment (e.g., covers, gloves, and goggles) and collective protection equipment (e.g., agricultural tractors with sealed cabins) have been developed. In general, these approaches are intended to reduce the contact of farmers and agricultural machinery operators with the more toxic and stable compounds, an example of which is fenitrothion. In this study, fenitrothion was used as a marker to evaluate the protection afforded inside a sealed tractor cabin. To simulate the pesticide exposure, tests were performed using artificial cotton targets as passive adsorptive agents inside the cabin during the pesticide application. Samples were extracted according to the US Environmental Protection Agency (USEPA) procedure using ultrasonic extraction and as proposed by the Brazilian Standard for Solid Waste Classification (NBR 10004). The extracts were analyzed by high-performance liquid chromatography with diode array detection (HPLC-DAD). The chromatographic method was optimized using a factorial design. The combined results indicated that the best conditions were achieved using a mobile phase with a water/acetonitrile ratio of 35:65, a column temperature of 40 °C, and a flow rate of 1.0 mL/min, with a total analysis time of <10 min. The method was evaluated in the linear range of 0.50 to 2.01 mg/kg, with a determination coefficient of 0.9886. The precision was evaluated on different days and the relative standard deviations were between 0.17 and 3.41 %. In relation to the accuracy, recovery values of 95 to 104 % were obtained. The detection and quantification limits were 0.18 and 0.50 mg/kg, respectively. None of the target cottons showed concentrations of

Is the application of CAD useful for radiologists for passing the official tests required for outpatient breast imaging?

International Nuclear Information System (INIS)

Malich, A.; Beier, A.; Gorna, R.; Bank, P.

2007-01-01

Purpose: to analyze whether currently available CAD systems meet the diagnostic requirements for passing screening tests (first reader CAD) and to analyze whether the additional usage of CAD systems provides significant support for the diagnosing radiologist on the basis of official screening test cases (second reading by CAD). Material and methods: 200 images of 100 mammographies of 50 patients of an official screening test case collection were analyzed double-blind with and without CAD printouts (iCAD, U.S.A.) by three radiologists: one experienced in breast analysis and CAD application, one experienced in mammography analysis but inexperienced in CAD usage, one with minimal experience with breast analysis and CAD application. All radiologists measured the largest diameter of any malignant mass. The mean value of these calculations was correlated to the largest diameter given by CAD prompts. Results: the mean sensitivity and specificity increased slightly as a result of the additional usage of CAD (1 and 0.6%, resp.). Both values are not statistically significant. The highest effect was measured for the radiologist with CAD experience, while no effect was measured for the inexperienced radiologist. CAD met the sensitivity requirements but not the specificity criteria (96 and 20.3%, resp.). The sizes given by CAD prompts corresponded significantly with the real sizes (r = 0.45, p < 0.05). (orig.)

Must Officials Microblog?

Institute of Scientific and Technical Information of China (English)

无

2011-01-01

Nowadays,Twitter-like microblogging is no longer strange for government officials in China.China Youth Daily reported more than 1,300 officials have opened real-name microblogs on Sina microblog. And there are now more than 2,000 microblogs of government

Computational Flow Modeling of a Simplified Integrated Tractor-Trailer Geometry

International Nuclear Information System (INIS)

Salari, K.; McWherter-Payne, M.

2003-01-01

For several years, Sandia National Laboratories and Lawrence Livermore National Laboratory have been part of a consortium funded by the Department of Energy to improve fuel efficiency of heavy vehicles such as Class 8 trucks through aerodynamic drag reduction. The objective of this work is to demonstrate the feasibility of using the steady Reynolds-Averaged Navier-Stokes (RANS) approach to predict the flow field around heavy vehicles, with special emphasis on the base region of the trailer, and to compute the aerodynamic forces. In particular, Sandia's computational fluid dynamics code, SACCARA, was used to simulate the flow on a simplified model of a tractor-trailer vehicle. The results are presented and compared with NASA Ames experimental data to assess the predictive capability of RANS to model the flow field and predict the aerodynamic forces

Smoke opacity of agricultural tractor using biodiesel in function of weather conditions in the time of testing; Opacidade da fumaca de trator agricola utilizando biodiesel em funcao das condicoes climaticas no horario de execucao do ensaio

Energy Technology Data Exchange (ETDEWEB)

Lopes, Afonso; Camara, Felipe T. da; Oliveira, Melina Cais Jejcic de; Furlani, Carlos E.A.; Silva, Rouverson Pereira da; Mello Junior, Jose G.S. [Universidade Estadual Paulista (FCAV/UNESP), SP (Brazil). Fac. de Ciencias Agrarias e Veterinarias. Dept. de Engenharia Rural], E-mail: afonso@fcav.unesp.br

2009-07-01

The biodiesel highlights as an alternative fuel to petroleum diesel, due its similar diesel properties, allowing the biodiesel replace the diesel without engine's alterations. The present work aimed measure the tractor's smoke opacity running with biodiesel in three proportions (B0, B50, and B100), in function of environment temperature and moisture in eight times (1h, 4h, 7h, 10h, 13h, 16h, 19h, and 22h). The experiment was conducted in the Rural Engineering Department of UNESP, Jaboticabal, Brazil, it was used a Valtra BM100 4x2 TDA (74kW - 100 cv) tractor, in the engine at 2350 rpm, and a soybean's distillated ethylic Biodiesel produced by USP - Laboratory of Development of Clean Technologies, in Ribeirao Preto, Brazil. The results evidence smoke opacity reduction in order to environment temperature reduction and when increased the moisture. (author)

Compaction of loamy soils due to tractor traffic in vineyards and orchards and its effect on infiltration in southern France

NARCIS (Netherlands)

Dijck, van S.J.E.; Asch, van T.W.J.

2002-01-01

Viticulture and fruit culture in Mediterranean areas demand frequent tractor traffic in vineyards and orchards for tillage and for the application of herbicides and pesticides, resulting in soil compaction. The aim of this study was to investigate theextent of soil compaction and its effect on

Development and Evaluation of a Wide-Bed Former for Vegetable Cultivation in Controlled Tractor Traffic

Science.gov (United States)

Dixit, Anoop; Khurana, Rohinish; Verma, Aseem; Singh, Arshdeep; Manes, G. S.

2018-05-01

India is the second largest producer of vegetables in the world. For vegetable cultivation, a good seed bed preparation is an important task which involves 6-10 different operations. To tackle the issue of multiple operations, a prototype of tractor operated wide bed former was developed and evaluated. The machine comprises of a rotary tiller and a bed forming setup. It forms bed of 1000 mm top width which is suitable as per the track width of an average sized tractor in India. The height of the beds formed is 130 mm whereas the top and bottom width of channel formed on both sides of the bed is 330 and 40 mm respectively at soil moisture content of 12.5-16% (db). The forward speed of 2.75 km/h was observed to be suitable for proper bed formation. The average fuel consumption of the machine was 5.9 l/h. The average bulk density of soil before and after the bed formation was 1.46 and 1.63 g/cc respectively. Field capacity of the machine was found to be 0.31 ha/h. The machine resulted in 93.8% labour saving and 80.4% saving in cost of bed preparation as compared to conventional farmer practice. Overall performance of wide-bed former was found to be satisfactory.

Long-term experiences in the use of rapeseed oil fuel in tractors of the emissions levels I and II; Langzeiterfahrungen zum Einsatz von Rapsoelkraftstoff in Traktoren der Abgasstufe I und II

Energy Technology Data Exchange (ETDEWEB)

Emberger, Peter; Thuneke, Klaus; Remmele, Edgar

2013-06-01

The operational behavior as well as the emission behavior should be clarified in long-term use by means of tractors which are powered by rapeseed oil fuel. This is based on the following measures: review of the quality of rapeseed oil fuel used; testing of the quality of the engine oil on a random basis; documentation of failures, maintenance and repair work; measurement of performance and fuel economy; measurement of exhaust emissions; diagnosis of engines.

Depreciation Rates for Australian Tractors and Headers - Is Machinery Depreciation a Fixed or Variable Cost?

OpenAIRE

Tozer, Peter R.

2005-01-01

Seven different remaining value functions for tractors and harvesters were estimated using data from advertised prices for used farm equipment. The generalised Box-Cox model was used to nest six of the seven functions. The more complex Box- Cox function explained the data better, but simpler models such as the sum-of-theyears- digits, or double-square root models were no different and were easier to manipulate to estimate depreciation rates and costs. There were up to three components of depr...

Características ergonômicas dos tratores agrícolas utilizados na região central do Rio Grande do Sul Ergonomic characteristics of agricultural tractors used in central region of Rio Grande do Sul State, Brazil

Directory of Open Access Journals (Sweden)

Henrique Debiasi

2004-12-01

Full Text Available A utilização de tratores agrícolas com boas condições ergonômicas reduz a probabilidade de ocorrência de acidentes e doenças ocupacionais, aumentando a eficiência dos trabalhadores. Neste trabalho, objetivou-se verificar a presença de itens relacionados à ergonomia de tratores agrícolas usados, bem como avaliar o comportamento destas características em função do tempo de uso das referidas máquinas. Foram analisados 175 tratores agrícolas pertencentes às microrregiões gaúchas de Santa Maria, Restinga Seca e Cachoeira do Sul, presentes em 114 propriedades aleatoriamente amostradas. Os resultados mostraram que apenas 3% dos espécimes avaliados eram equipados com cabina, sendo que a maior parte dos mesmos não apresentava isolamento do calor gerado pelo motor e transmissão. Com relação à ergonomia dos comandos, mais de 70% dos tratores tinham alavancas de câmbio centrais, enquanto que apenas 8% eram equipados com volante de direção regulável. Da mesma forma, mais de 20% dos exemplares amostrados possuíam bancos sem estofamento. Além disso, a presença dos itens avaliados foi menor para os tratores mais antigos.It is possible to reduce the probability of work accidents, diseases occurrence and increase the work efficiency using agricultural tractors with good ergonomic conditions. The objective of this research was to verify the presence of ergonomic items in used agricultural tractors and also to evaluate the influence of tractor age in these characteristics. 175 agricultural tractors belonging to 3 regions of Rio Grande do Sul State (Santa Maria, Restinga Seca and Cachoeira do Sul, Brazil, present in 114 farms randomly sampled, were evaluated. The results showed that only 3% of sampled specimens were equipped with a cab, and most part of the tractors did not have protection against the heat produced by tractor transmission and engine. With regard to ergonomics of commands, more than 70% of the tractors had gear levers

Evaluation of tractive performance of four agricultural tractors in laterally inclined terrain Avaliação do desempenho operacional de quatro tratores agrícolas em terreno inclinado lateralmente

Directory of Open Access Journals (Sweden)

Fabricio Leite

2011-10-01

Full Text Available The present work aimed to evaluate the tractive performance of four agricultural tractors with auxiliary front traction in function of six lateral inclinations in a lateral track of trials, which belongs to the Agronomic Sciences Faculty from the São Paulo State University, Campus of Botucatu. The lateral inclinations were 0; 5; 10; 15; 20 and 25 degrees. In all of these situations, the tractors operated with predetermined load of an imposed traction to the pulled tractor of 40 kN in the inclination of 0 degrees. Hence a delineation in random blocks was used, considering six inclinations and four tractors, and with three repetitions for each treatment. The analyzed variables were slippage, tractive force, hourly fuel consumption, and speed. It was concluded that the pneumatic tire configurations influenced in the tractive performance of the tractors, as they increased the lateral inclinations of the terrain.O presente trabalho teve como objetivo avaliar o desempenho operacional de quatro tratores agrícolas com tração dianteira auxiliar, em função de seis inclinações laterais, em uma pista lateral de ensaios, pertencente à Faculdade de Ciências Agronômicas da Universidade Estadual Paulista, Câmpus de Botucatu. As inclinações laterais foram 0; 5; 10; 15; 20 e 25 graus. Em todas estas situações, os tratores operaram com carga predeterminada de tração imposta ao trator tracionado de 40 kN na inclinação de 0 grau. Portanto, foi utilizado um delineamento em blocos casualizados (DBC, sendo seis inclinações e quatro tratores, e com três repetições para cada tratamento. As variáveis analisadas foram patinhagem, força de tração, consumo horário de combustível e velocidade de deslocamento. Concluiu-se que a configuração dos rodados pneumáticos influenciaram no desempenho operacional dos tratores, conforme aumentaram as inclinações laterais do terreno.

43 CFR 20.201 - Ethics officials.

Science.gov (United States)

2010-10-01

... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false Ethics officials. 20.201 Section 20.201... Department Ethics Program § 20.201 Ethics officials. (a) Designated Agency Ethics Official refers to the official designated under 5 CFR 2638.201 to coordinate and manage the Department's ethics program. (b) The...

30 CFR 1.1 - Official emblem.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Official emblem. 1.1 Section 1.1 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OFFICIAL EMBLEM AND OMB CONTROL NUMBERS... OFFICIAL EMBLEM § 1.1 Official emblem. The following emblem is established and shall be used as the...

Harvesting pulpwood and firewood using a tractor-mounted single-grip harvester

International Nuclear Information System (INIS)

Ihonen, M.

1998-01-01

The TTS-Institute's Department of Forestry conducted a work study on the AM 240 felling-delimbing-cross-cutting -device. The timber was prepared into pulp- and fuelwood. The tops of the pulpwood stems and stems smaller than pulpwood were made into fuelwood. The base machine used was an agricultural tractor. The study is part of a research project titled Forest Owners' Energy-Wood Harvesting Technology. The combined productivity of preparing pulpwood and fuelwood varied between 2.8-4.1 m 3 per effective hour. Thus, the productivity achieved was of the same order as that reported in an earlier TTS-Institute study on the devices AM 200 model. The outturns on the sample strips included a fair amount of crooked hardwood timber, which iced to reduced productivity. During the work study the felling device functioned reliably. (author) 3 refs

System-wide electrification and appropriate functions of tractor and implement

Directory of Open Access Journals (Sweden)

Sebastian Tetzlaff

2015-10-01

Full Text Available The advantages of electric drive technology in industrial applications have been known for a long time. In addition to the flexibility and variability for the system integration, the very good controllability and the overload capacity should be mentioned. To increase the effectiveness of agricultural machinery and equipment crucially, the different electrical/electronic systems, drives and functions have to be interconnected machine internally and also externally, based on a system-wide approach. Thereby single machinery, machinery combinations and finally complete harvest chains can be used in a smarter and more efficient way. Using the example of a tractor-swather combination the suitability of electric drives itself and of the hybrid and interface concept is proven. Newly developed functions for overload protection and prediction of the working process are presented and their integration into the machine overarching energy and operational management is described. The transferability of the results and solutions to cognate applications is ensured. Keywords

IMPROVEMENT OF WEAR-RESISTANCE AND SERVICE LIFE OF MULTI-DISK BRAKE MECHANISMS OF «BELARUS» TRACTOR BY LASER THERMAL HARDENING OF FAST WEARING PARTS

Directory of Open Access Journals (Sweden)

O. S. Kobjakov

2008-01-01

Full Text Available Problems concerning wear resistance improvement of «Belarus» tractor brake mechanism parts are considered in the paper. Properties of ВЧ-50-pig iron are investigated as a result of laser thermal hardening by various technological methods.

5 CFR 9701.523 - Official time.

Science.gov (United States)

2010-01-01

... 5 Administrative Personnel 3 2010-01-01 2010-01-01 false Official time. 9701.523 Section 9701.523... MANAGEMENT SYSTEM Labor-Management Relations § 9701.523 Official time. (a) Any employee representing an... authorized official time for such purposes, including attendance at impasse proceedings, during the time the...

Analisis dan Perancangan Aplikasi Pendukung Erp Sap R/3 Modul Sales And Distribution PT. United Tractors, Tbk

OpenAIRE

Johan, Johan; Susanto, Yokie; Joe, Yusmin; Robby, Robby

2010-01-01

The purpose of this research is to analyse sales process having been implementing Sales and Distribution module of ERP SAP R/3 and also to design a supporting application for sales process at PT United Tractor, Tbk. The benefit of this application is to help sales person and customer in doing inquiries, quotation and sales order also material information through short message. The method of this research is data capturing, literature review, object oriented analysis and design and Rational Un...

NAGWS Softball Guide 1991: Official Rules/Officiating.

Science.gov (United States)

Matson, Janis

This softball guide presents information on: the National Association for Girls and Women in Sport (NAGWS), rule modifications, softball playing rules, and officiating. Section 1 explains the purpose, beliefs, and services of the NAGWS; provides information on the association's committees and membership application; and explains use of the…

7 CFR 51.17 - Official sampling.

Science.gov (United States)

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Official sampling. 51.17 Section 51.17 Agriculture... Inspection Service § 51.17 Official sampling. Samples may be officially drawn by any duly authorized... time and place of the sampling and the brands or other identifying marks of the containers from which...

Preparticipation Screening of Athletic Officials: SEC Football Referees at Risk.

Science.gov (United States)

Turner, John L; Walters, Rod; Leski, Mark J; Saywell, Robert M; Wooldridge, J Scott

2003-03-01

Although preparticipation screening for athletes is commonplace, few studies have addressed the issue for those officiating at games. To review current data on physiologic stress on sports officials, to obtain prevalence data on health parameters for football officials, and to determine the outcomes when screening criteria are applied in preseason exams. A protocol was established using health history questionnaires and physical exams with laboratory screening to assess the health of all football officials working in the Southeastern Conference (SEC) from 1997 to 2000. The main outcome measure was the prevalence of cardiac risk factors as determined by American College of Sports Medicine guidelines. Initial screening of 102 football officials revealed that 10.1% of SEC referees had elevated systolic blood pressure, 13.9% had elevated diastolic blood pressure, and 3.8% had resting tachycardia. Average body mass index (BMI) was 28.6 kg/m2, with 87.3% having a BMI that exceeded 25 (overweight). About one-third (31.6%) had a BMI greater than 30 (obese). Total fasting cholesterol exceeded 200 mg/dL in 44.2%, HDL levels were below 35 mg/dL in 34.3%, and LDL levels were above 120 mg/dL in 62.3%. Compared with age-adjusted national data, there were more overweight and more obese officials, but they had lower systolic and diastolic blood pressures and lower mean total cholesterol levels. Using the Framingham Study prediction model to estimate coronary heart disease (CHD) risk, analysis revealed that referees had a lower risk than the national 10-year CHD risk but a higher risk compared with that of the low-risk population. These data reveal a greater need for graded exercise testing. The higher rates of obesity among officials will promote further screening for CHD risk factors.

Effect of the load of drive axles and high of the curtain on stress-strain properties of the tractor

Directory of Open Access Journals (Sweden)

Tomáš Šmerda

2007-01-01

Full Text Available The goal of the experimental measurement was determination of relation among weight load of the tractor together, hitch height changes and drawbar characteristic. The measurement was realized on chassis dynamometer at MUAF in Brno. The first step consisted of rated speed characteristics measurement in conformity with OECD demands. The drawbar characteristic was measured under two selected gears. Adding 980 kg to the nominal wight of the tractor brought increasing maximal drawbar power and drawbar force together with decreasing of slip. The highest differences were observed during the mesurement of fifth gear shifted. The drawbar force grew up to 18.9% as well as the maximal drawbar power (15.2%. The maximal drawbar power at ninth gear gave 62.8 kW. The hitch height was setting to 0.54 m; 0.64 m and 0.74 m. When the hitch height was set from 0.54 m to 0.74 m the drawbar force an power on front axle was lower by reason of load reduction. As can be noticed from the final drawbar characteristics, both curves are identical up to border of maximal drawbar power. Small differences in the area of the highest slips can be ascribed to the rolling resistance.

Power Tillers for Demining: Blast Test

Directory of Open Access Journals (Sweden)

Emanuela Elisa Cepolina

2007-06-01

Full Text Available Power tillers are very simple and versatile machines with large scale diffusion in developing countries, where they are commonly used both for agriculture and for transportation purposes. A new integrated participatory approach that makes use of and improves local end-users knowledge has been used to design a new robotic system for humanitarian demining applications in Sri Lanka, using power tiller as core module. A demining machine composed by a tractor unit, a ground processing tool and a vegetation cutting tool is here presented together with results obtained from the first blast test on the preliminary version of tractor unit armouring. Different breakable connections between wheels and axle have been designed to cause physical detachment and interrupt the transmission of the shock wave released by the explosion of a mine under one wheel. Effects of explosions on different types of wheels and on the chassis have been recorded and commented.

Power Tillers for Demining: Blast Test

Directory of Open Access Journals (Sweden)

Emanuela Elisa Cepolina

2008-11-01

Full Text Available Power tillers are very simple and versatile machines with large scale diffusion in developing countries, where they are commonly used both for agriculture and for transportation purposes. A new integrated participatory approach that makes use of and improves local end-users knowledge has been used to design a new robotic system for humanitarian demining applications in Sri Lanka, using power tiller as core module. A demining machine composed by a tractor unit, a ground processing tool and a vegetation cutting tool is here presented together with results obtained from the first blast test on the preliminary version of tractor unit armouring. Different breakable connections between wheels and axle have been designed to cause physical detachment and interrupt the transmission of the shock wave released by the explosion of a mine under one wheel. Effects of explosions on different types of wheels and on the chassis have been recorded and commented.

Conformidade de acessos e de saídas de postos de operação em tratores agrícolas segundo norma NBR/ISO 4252 Conformity of the accesses and exits of agricultural tractors workplaces according to NBR/ISO 4252 STANDARD

Directory of Open Access Journals (Sweden)

Danielle M. P. Mattar

2010-02-01

Full Text Available Este trabalho teve como objetivo avaliar a conformidade dos acessos e de saídas dos postos de operação em tratores agrícolas, por meio de população amostral dos tratores fabricados no Brasil. Para a avaliação, diversos itens referentes aos acessos e às saídas dos postos de operação foram analisados qualitativa e quantitativamente com base nos padrões da Norma NBR/ISO 4252. Ao final do trabalho, foi observado que os tratores classificados na Classe III, quanto à potência nominal do motor, atendem ao maior número de requisitos da Norma em comparação a tratores da Classe II. Dentre os itens avaliados, a altura da plataforma até o teto dos postos de operação foi atendida por todos os modelos. As presenças de batentes de proteção sobre os degraus e de corrimão para o operador foram os itens em maior desconformidade sobre os tratores. Como resultado médio, a população amostral foi conforme em 66% dos itens analisados. Os tratores dotados de motores de maior potência apresentaram, em geral, acessos e saídas dos postos de operação mais ergonômicos e seguros. De maneira geral, conclui-se pela baixa conformidade dos itens de ergonomia e de segurança dispostos ao operador sobre os postos de operação em tratores agrícolas nacionais.This work had as objective to evaluate the conformity of agricultural tractors workplaces accesses and exits made in Brazil. For this evaluation, the workplaces were analyzed according to NBR/ISO 4252 Standard. It was observed that the tractors classified in Class III, in relation to power engine, was better then tractors in Class II. Among the parameters evaluated, the platform weight of operator workplace was attended by all the tractors. The items in less conformoty in agricultural tractors are the doorpost of protection on the steps and the handrail to the operator. As results, the sampling population was conformed in 66% of the analyzed items. The tractors with more powerful engines

Human factors engineering applications in the testing of the legal weight truck cask transportation system

International Nuclear Information System (INIS)

Smith, T.C.; Peck, M. III; Sealock, R.A.

1994-01-01

The Department of Energy's Office of Civilian Radioactive Waste Management (OCRWM) will collect performance data to be used in limited human factors engineering analysis of the light weight tractor as a component of the legal weight truck cask transport system. The Management and Operating contractor will provide an analysis and comparison of limited data on driver behavior and subjective driver evaluations of the light weight tractor performance versus that of a heavier baseline tractor. A significant difference in performance data would suggest that given tractor configurations affect driver behavior differently

Determination of the curves, torque harnesses of performance of an agricultural tractor Massey Ferguson MF 275

Energy Technology Data Exchange (ETDEWEB)

Paula, Vanderson Rabelo de [Universidade de Sao Paulo (ESALQ/USP), Piracicaba, SP (Brazil). Escola Superior de Agricultura Luiz de Queiroz; Silva, Breno Alves; Santos, Thiago Castro Vidal dos; Porto, Rodrigo Padovani; Volpato, Carlos Eduardo Silva; Barbosa, Jackson Antonio [Universidade Federal de Lavras (UFLA), MG (Brazil)

2008-07-01

The globalization of the economy has approached the markets and one of the consequences of this approach is the entrance of new equipment and highly competitive machines in cost terms. This is the same reality of the Brazilian agricultural sector that today counts on new options of machines and very interesting implements of the point of view of the acquisition cost. In this context, this work aimed at the dynamometric assay of an agricultural tractor for attainment of its curves of torque, power using the B100 soybean fuels, B100 olive, B100 diesel. (author)

Official Apologies

DEFF Research Database (Denmark)

Villadsen, Lisa Storm

as strategic maneuvers regarding influence and power and as a form of political discourse chiefly concerned with reframing or recuperating particular values and norms pertinent to a community’s self-understanding. “Collective Apologies and Reconstituting Citizenship” Jason A. Edwards, Bridgewater State...... these apologies are not only how they work rhetorically, but also how they reconfigure and reconstitute citizenship domestically and internationally. For example, an official apology may allow a group of people to finally feel like they can take their place as full citizens of a particular nation-state or part...... of Social Affairs’ Reasons for not Apologizing” Lisa S. Villadsen, University of Copenhagen While official apologies issued by governments and other state representatives are more and more common in many countries, the same is not true for Denmark. A case in point is a recent case about mistreatment...

Study on provenance of Ru porcelain in yanhedian kiln and official jun porcelain by EDXRF

International Nuclear Information System (INIS)

Li Guoxia; Guo Min; Zhao Weijuan; Sun Hongwei; Gao Zhengyao; Xie Jianzhong; Wen Chang; Wang Chuan; Li Rongwu; Guo Peiyu; Yang Dawei

2010-01-01

To understand the provenance relationship of Ru porcelain in Yanhedian kiln and official Jun porcelain , with energy dispersive x-ray fluorescence spectrometer (EDXRF) measured 56 Ru porcelain in Yanhedian kiln and official Jun porcelain samples of chemical composition of the main volume, analysis results show: Yanhedian kiln Ru porcelain bodies Al 2 O 3 average content Outpaces official Jun porcelain bodies, SiO 2 , K 2 O average below official Jun porcelain bodies; Yanhedian kiln Ru porcelain glazes Al 2 O 3 average content Outpaces official Jun porcelain glaze, SiO 2 , CaO average significantly lower than Jun glaze, two primary body and glaze on porcelain to chemical composition of the averages vary. A display of the peacekeeping two-dimensional scatter analysis supplies of official Jun porcelain bodies focused, Yanhedia kiln Ru porcelain bodies birth supplies comparatively, Jun and Yanhedian kiln Ru porcelain bodies material habitats near but not identical. The official Jun porcelain glazes origin focused, glaze formula changes less, and Yanhedia kiln Ru porcelain glazes origin and formula are scattered. Therefore, Yanhedian kiln Ru porcelain samples and the Official Jun porcelain samples can be commendably differentiated by EDXRF testing and chemical composition scatter analysis. (authors)

Fuel efficiency of conventional design tractors diesel engines in relation to new design

Directory of Open Access Journals (Sweden)

Jevtić Jeremija

2006-01-01

Full Text Available Total consumption of all types of energies is rather high nowadays with constant tendency of increasing. Transport section is one of the highest consumers of energy obtained from fossil fuels. It is absolutely clear that the reduction of energy consumption and the protection of environment - exhaust emission reduction, i. e. cleaner air, will be one of the main tasks of automotive industry in the first decades of the 21st century. In spite of its superiority over the petrol engine in respect of the fuel consumption, a diesel engine "suffers" from the increased exhaust emission, particles and NOx first of all and also from the noise and vibrations. The paper gives a review of fuel efficiency of conventional design tractors diesel engines in relation to new design. .

Compactação causada pelo tráfego de trator em diferentes manejos de solo = Soil compaction induced by tractor traffic in different soil managements

Directory of Open Access Journals (Sweden)

João Paulo Arantes Rodrigues da Cunha

2009-07-01

Full Text Available O objetivo deste trabalho foi avaliar a compactação do solo causada pelo tráfego de trator, em um Latossolo Vermelho distroférrico submetido a diferentes tipos de preparo. O delineamento experimental utilizado foi o de blocos casualizados, com arranjo de parcelassubdivididas, considerando os tipos de preparo de solo como tratamentos principais e o número de passadas do trator como tratamentos secundários. Como tratamentos de preparo de solo, além de uma testemunha sem movimentação, foram avaliados: aração com 18 cmde profundidade, aração com 18 cm de profundidade, seguida de gradagem a 10 cm e subsolagem a 40 cm de profundidade. Após o preparo, foi avaliada a resistência do solo à penetração, por meio de um penetrômetro eletrônico, antes da passagem do trator e apósuma, três, cinco e sete vezes a passagem do trator na mesma linha de tráfego. Também se realizou a avaliação de densidade do solo. Concluiu-se que quanto maior a pulverização do solo, maior foi o potencial de compactação. Solos recentemente arados e gradeados forammais susceptíveis à compactação do que solos somente arados ou subsolados. O efeito do tráfego do trator concentrou-se principalmente na camada superficial, e a primeira passada foi a que mais provocou compactação do solo.The objective of this work was to evaluate soil compaction induced bytractor traffic in a Red Latosol (Typic Acrustox, submitted to different soil managements. The experiment was arranged in a subdivided parcel scheme, with types of soil tillage as theprimary soil treatments and the number of tractor passes as secondary treatments. In addition to a control treatment without soil tillage, the treatments were: tilling to a depth of 18 cm, a tilling to a depth of 18 cm followed by harrow use at a depth of 10 cm, and a 40-cm deep subsoil tilling. After preparing the parcels, soil penetration resistance was measured with an electronic penetrometer, before tractor passes and

9 CFR 54.11 - Approval of laboratories to run official scrapie tests and official genotype tests.

Science.gov (United States)

2010-01-01

... request approval to conduct one or more types of scrapie test or genotype test on one or more types of... type of test and for each type of tissue for which they request approval. (c) The Administrator may... the laboratory and shall give the director an opportunity to respond. If there are conflicts as to any...

32 CFR 1605.28 - Signing official papers.

Science.gov (United States)

2010-07-01

... 32 National Defense 6 2010-07-01 2010-07-01 false Signing official papers. 1605.28 Section 1605.28 National Defense Other Regulations Relating to National Defense SELECTIVE SERVICE SYSTEM SELECTIVE SERVICE SYSTEM ORGANIZATION District Appeal Boards § 1605.28 Signing official papers. Official documents issued...

32 CFR 1605.59 - Signing official papers.

Science.gov (United States)

2010-07-01

... 32 National Defense 6 2010-07-01 2010-07-01 false Signing official papers. 1605.59 Section 1605.59 National Defense Other Regulations Relating to National Defense SELECTIVE SERVICE SYSTEM SELECTIVE SERVICE SYSTEM ORGANIZATION Local Boards § 1605.59 Signing official papers. Official papers issued by a local...

A statistical description of the types and severities of accidents involving tractor semi-trailers

International Nuclear Information System (INIS)

Clauss, D.B.; Wilson, R.K.; Blower, D.F.; Campbell, K.L.

1994-06-01

This report provides a statistical description of the types and severities of tractor semi-trailer accidents involving at least one fatality. The data were developed for use in risk assessments of hazardous materials transportation. Several accident databases were reviewed to determine their suitability to the task. The TIFA (Trucks Involved in Fatal Accidents) database created at the University of Michigan Transportation Research Institute was extensively utilized. Supplementary data on collision and fire severity, which was not available in the TIFA database, were obtained by reviewing police reports for selected TIFA accidents. The results are described in terms of frequencies of different accident types and cumulative distribution functions for the peak contact velocity, rollover skid distance, fire temperature, fire size, fire separation, and fire duration

CRIMES AGAINST OFFICIAL DUTY IN THE REPUBLIC OF MACEDONIA

Directory of Open Access Journals (Sweden)

Darko Majhosev

2015-07-01

Full Text Available The paper analyzes the legal provisions of the Criminal Code of the Republic of Macedonia relating to crimes against official duty. Crimes against official duty represent a group of criminal offenses that occupy a special place in criminal law. This kind of crimes is also called civil servants crimes, that is, they are defined as a violation of duty made by an official in performing his/her official duty. In this paper we will analyze all articles of the Criminal Code that regulate the group of criminal offenses against official duty. Most frequent cases of misuse of official duty are cases of misuse of official position and authorization, unprincipled operation within the service, defraud in the service, receiving a bribe, giving a bribe, unlawful mediation, disclosing an official secret, falsifying an official document and other. The paper will define the terms official and responsible person. In the context of the paper we will show the research referring to the number of registered and accused of crimes against official duty in the Republic of Macedonia in the period from 2004 to 2013.

31 CFR 0.105 - Deputy Ethics Official.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Deputy Ethics Official. 0.105 Section... EMPLOYEE RULES OF CONDUCT General Provisions Responsibilities § 0.105 Deputy Ethics Official. The Chief Counsel or Legal Counsel for a bureau, or a designee, is the Deputy Ethics Official for that bureau. The...

Physical examinations and laboratory tests in antenatal care visits in Denmark. Do reported practice and current official guidelines concord with results of literature reviews? A nationwide study of the public scheme of shared antenatal care in general practice, centres of midwifery and hospital

DEFF Research Database (Denmark)

Kristensen, F B; Andersen, K V; Andersen, A M

1995-01-01

To analyse physical examinations and laboratory tests reported in antenatal care visits in relation to official guidelines and reviews of appropriateness.......To analyse physical examinations and laboratory tests reported in antenatal care visits in relation to official guidelines and reviews of appropriateness....

The Effects of the Tractor and Semitrailer Routing Problem on Mitigation of Carbon Dioxide Emissions

Directory of Open Access Journals (Sweden)

Hongqi Li

2013-01-01

Full Text Available The incorporation of CO2 emissions minimization in the vehicle routing problem (VRP is of critical importance to enterprise practice. Focusing on the tractor and semitrailer routing problem with full truckloads between any two terminals of the network, this paper proposes a mathematical programming model with the objective of minimizing CO2 emissions per ton-kilometer. A simulated annealing (SA algorithm is given to solve practical-scale problems. To evaluate the performance of the proposed algorithm, a lower bound is developed. Computational experiments on various problems generated randomly and a realistic instance are conducted. The results show that the proposed methods are effective and the algorithm can provide reasonable solutions within an acceptable computational time.

The analysis of the motor characteristics of D–RME–E fuel blend during on-field tests

Directory of Open Access Journals (Sweden)

Ž. Bazaras

2009-09-01

Full Text Available A detailed analysis of the characteristics of D–RME–E (diesel-rapeseed methyl ester-ethanol was carefully performed fuelling an 18 kW capacity tractor unit equipped with the four-stroke D21A1 diesel engine (combustion chamber consists of a dished piston. The conducted on-field test demonstrated a positive effect on the dynamic and ecological characteristics of the tractor unit while fuelling the engine with biodiesel blend 70% D+30% RME (hereinafter – B30 admixed with dehydrated ethanol additive (5% (v/v. This compound did not affect a decrease in the diesel engine power, and in the range of experiment error, showed a tendency of ~2% fuel economy compared to pure B30. A dramatic decrease in PM (40%, HC (25% and CO (6% emissions comparing to fossil diesel was observed when operating the tractor unit at maximum traction power which is a characteristic operating mode of the heavy duty transport means of agricultural purpose. NOx emission of the proposed D–RME–E blend showed a tendency to decrease to 4% compared to B30.

9 CFR 590.30 - At official plants.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false At official plants. 590.30 Section 590... Authorities § 590.30 At official plants. (a) Requirements within the scope of the Act with respect to premises, facilities, and operations of any official plant which are in addition to or different than those made under...

78 FR 2627 - Fees for Official Inspection and Official Weighing Services Under the United States Grain...

Science.gov (United States)

2013-01-14

... authority to charge and collect reasonable fees to cover the cost of performing official services. These fees also cover the costs associated with managing the program. After a financial review of GIPSA's Fees for Official Inspection and Weighing Services, including a comparison of the costs and revenues...

78 FR 22151 - Fees for Official Inspection and Official Weighing Services Under the United States Grain...

Science.gov (United States)

2013-04-15

... Inspection Service (FGIS) with the authority to charge and collect reasonable fees to cover the cost of performing official services. The fees also cover the costs associated with managing the program. After a... associated administrative and supervisory costs. The fees for official inspection and weighing services were...

Sistema de controle de velocidade sincronizada entre dois veículos agrícolas Synchronized speed control system between two agricultural vehicles

Directory of Open Access Journals (Sweden)

Rodrigo Fernando Galzerano Baldo

2012-02-01

Full Text Available Este trabalho apresenta uma proposta para o controle automático de velocidade entre dois veículos que necessitam trafegar em paralelo durante operações agrícolas. É descrito o desenvolvimento e os testes de campo de um sistema de controle de velocidade para um trator escravo baseado na velocidade de um trator mestre, utilizando um controlador desenvolvido em lógica fuzzy. Para esses testes, os tratores foram instrumentados com GPS, encoder, computador e transmissor de radiofrequência, sendo instalado ainda no trator escravo um motor de passo para o controle da velocidade de deslocamento. Para avaliar o sistema, realizaram-se dois testes: no primeiro, a resposta do trator escravo à variação de velocidade foi avaliada a partir de simulações de variação na velocidade de entrada; no segundo, foram utilizados dois tratores variando a velocidade do trator mestre e observando a resposta do trator escravo. No primeiro teste, o trator escravo acompanhou a simulação da variação da velocidade com um erro quadrático médio (EQM não significativo e erro médio percentual (EMP máximo de 1,3%. No segundo teste, o trator escravo acompanhou a variação de velocidade do trator mestre com o (EMP de deslocamento variando em módulo de 0,2% a 2,9%.This paper presents a proposal for automatic speed control of vehicles that requires working in synchronism with each other during agricultural operations. It describes the development and field tests of a control system for a slave tractor based on the master tractor speed, using a fuzzy controller. For the tests the master tractor was instrumented with GPS, encoders, computer and radio transmitter. The slave tractor was instrumented in the same way, and included also a stepper motor to act on the tractor throttle. To evaluate the system two tests were conducted. In the first, the master tractor speed was simulated using only the slave tractor. In the second test, two tractors were used varying the

Tractor-mounted, GPS-based spot fumigation system manages Prunus replant disease

Directory of Open Access Journals (Sweden)

V. Udompetaikul

2013-10-01

Full Text Available Our research goal was to use recent advances in global positioning system (GPS and computer technology to apply just the right amount of fumigant where it is most needed (i.e., in a small target treatment zone in and around each tree replanting site to control Prunus replant disease (PRD. We developed and confirmed the function of (1 GPS-based software that can be used on cleared orchard land to flexibly plan and map all of an orchard's future tree sites and associated spot fumigation treatment zones and 2 a tractor-based GPS-controlled spot fumigation system to quickly and safely treat the targeted tree site treatment zones. In trials in two almond orchards and one peach orchard, our evaluations of the composite mapping and application system, which examined spatial accuracy of the spot treatments, delivery rate accuracy of the spot treatments, and tree growth responses to the spot treatments, all indicated that GPS spot fumigation has excellent potential to greatly reduce fumigant usage while adequately managing the PRD complex.

[Big data in official statistics].

Science.gov (United States)

Zwick, Markus

2015-08-01

The concept of "big data" stands to change the face of official statistics over the coming years, having an impact on almost all aspects of data production. The tasks of future statisticians will not necessarily be to produce new data, but rather to identify and make use of existing data to adequately describe social and economic phenomena. Until big data can be used correctly in official statistics, a lot of questions need to be answered and problems solved: the quality of data, data protection, privacy, and the sustainable availability are some of the more pressing issues to be addressed. The essential skills of official statisticians will undoubtedly change, and this implies a number of challenges to be faced by statistical education systems, in universities, and inside the statistical offices. The national statistical offices of the European Union have concluded a concrete strategy for exploring the possibilities of big data for official statistics, by means of the Big Data Roadmap and Action Plan 1.0. This is an important first step and will have a significant influence on implementing the concept of big data inside the statistical offices of Germany.

Official Statistics and Statistics Education: Bridging the Gap

Directory of Open Access Journals (Sweden)

Gal Iddo

2017-03-01

Full Text Available This article aims to challenge official statistics providers and statistics educators to ponder on how to help non-specialist adult users of statistics develop those aspects of statistical literacy that pertain to official statistics. We first document the gap in the literature in terms of the conceptual basis and educational materials needed for such an undertaking. We then review skills and competencies that may help adults to make sense of statistical information in areas of importance to society. Based on this review, we identify six elements related to official statistics about which non-specialist adult users should possess knowledge in order to be considered literate in official statistics: (1 the system of official statistics and its work principles; (2 the nature of statistics about society; (3 indicators; (4 statistical techniques and big ideas; (5 research methods and data sources; and (6 awareness and skills for citizens’ access to statistical reports. Based on this ad hoc typology, we discuss directions that official statistics providers, in cooperation with statistics educators, could take in order to (1 advance the conceptualization of skills needed to understand official statistics, and (2 expand educational activities and services, specifically by developing a collaborative digital textbook and a modular online course, to improve public capacity for understanding of official statistics.

Crash test of a nuclear spent fuel cask and truck transport system

International Nuclear Information System (INIS)

Huerta, M.; Yoshimura, R.H.

1978-01-01

Sandia Laboratories has conducted a 96 kph (60 mph) full scale truck impact test for ERDA's Environmental Control Technology Division. Rockets propelled a 20, 500-kg (22-ton) cask mounted on its shipping trailer, coupled to a conventional cab-over tractor, into a massive, heavily reinforced concrete target. This summary report describes and compares the results of the computer analysis, scale model, and full scale tests

Durability testing of the high-capacity GA-4/GA-9 trailer

International Nuclear Information System (INIS)

Zimmer, A.; Lyon, T.

1995-01-01

GA designed trailers to transport the GA-4 and GA-9 LWT from-reactor spent nuclear fuel shipping casks. GA designed and fabricated the GA-9 trailer to ANSI N14.30 requirements and is now performing a durability test at the AlliedSignal Automotive Proving Grounds. The trailer, simulated cask and tractor. The test program objective is to evaluate and improve, as necessary, the trailer's durability, reliability and performance

Effect of poultry fat oil biodiesel on tractor engine performance

Directory of Open Access Journals (Sweden)

M Bavafa

2016-04-01

Full Text Available Introduction: Depletion of fossil fuels and environmental degradation are two major problems faced by the world. Today fossil fuels take up to 80% of the primary energy consumed in the world, of which 58% is consumed by the transport sector alone (Mard et al., 2012. The combustion products cause global warming, which is caused of emissions like carbon monoxide (CO, sulfur dioxide (SO2 and nitrogen oxides (NOX. Thus it is essential that low emission alternative fuels to be developed for useing in diesel engines. Many researchers have concluded that biodiesel holds promise as an alternative fuel for diesel engines. Biodiesel is oxygenated, biodegradable, non-toxic, and environmentally friendly (Qi et al., 2010. Materials and Methods: In this study transesterification method was used to produce biodiesel, because of its simplicity in biodiesel production process and holding the highest conversion efficiency. Transesterification of poultry fat oil and the properties of the fuels: Fatty acid methyl ester of poultry fat oil was prepared by transesterification of oil with methanol in the presence of KOH as catalyst. The fuel properties of poultry fat oil methyl ester and diesel fuel were determined. These properties are presented in Table 1. Tests of engine performance and emissions: After securing the qualitative characteristics of produced biodiesel, different biodiesel fuels of 5%, 10%, 15%, and 20% blended with diesel fuel were prepared. A schematic diagram of the engine setup is shown in Fig.1. The MF-399 tractor engine was used in the tests. The basic specifications of the engine are shown in Table 3. The engine was loaded with an electromagnetic dynamometer. The Σ5 model dynamometer manufactured by NJ-FROMENT was used to measure the power and the torque of the tractor engine. The speed range and capacity of this device are shown in Table 2. A FTO Flow Meter, manufactured by American FLOWTECH Company, was used to measure the fuel consumption

7 CFR 37.10 - Official assessment.

Science.gov (United States)

2010-01-01

... ASSESS ORGANIC CERTIFYING AGENCIES § 37.10 Official assessment. Official assessment of an applicant's certification program shall be granted upon successful completion of a two-step review process, as provided for... completion of an adequacy audit by the auditors. (b) Program assessment. Assessment of a certification...

12 CFR 328.3 - Official advertising statement requirements.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 4 2010-01-01 2010-01-01 false Official advertising statement requirements... OF GENERAL POLICY ADVERTISEMENT OF MEMBERSHIP § 328.3 Official advertising statement requirements. (a... medium, that is designed to attract public attention or patronage to a product or business. (b) Official...

13 CFR 105.403 - Designated Agency Ethics Officials.

Science.gov (United States)

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Designated Agency Ethics Officials... Agency Ethics Officials. The Designated Agency Ethics Official and Alternates administer the program for... advice and counsel regarding matters relating to the Ethics in Government Act of 1978 and its...

38 CFR 0.735-1 - Agency ethics officials.

Science.gov (United States)

2010-07-01

... 38 Pensions, Bonuses, and Veterans' Relief 1 2010-07-01 2010-07-01 false Agency ethics officials... STANDARDS OF ETHICAL CONDUCT AND RELATED RESPONSIBILITIES General Provisions § 0.735-1 Agency ethics officials. (a) Designated Agency Ethics Official (DAEO). The Assistant General Counsel (023) is the...

[Chemical composition and chromaticity characteristic of Jilan glaze of Ming and Qing official kilns].

Science.gov (United States)

Wu, Jun-ming; Zhang, Mao-lin; Li, Qi-jiang; Wu, Juan; Quan, Kui-shan; Cao, Jian-wen

2012-08-01

Color glazes of Ming and Qing official kilns are excellent representatives of the famous ancient Chinese porcelains. The study of official ware with Jilan glaze has been an important topic. But it made slow progress due to the rarity of samples with strict production management and using system. The recipes, chemical composition and chromaticity characteristic of the Jilan samples excavated from official kilns in the Ming and Qing dynasties were first discussed by systematical testing with the energy dispersive X-ray fluorescence (EDXRF) and color difference meter. The results showed that the porcelain stone content in Jilan bodies of official kiln in the Ming dynasty is higher than the samples of the Qing dynasty. The manganese content in Jilan glazes of the Ming dynasty is higher than that in the Qing dynasty, while the glaze ash addition and the lightness value in the glaze are opposite.

45 CFR 99.27 - Official transcript.

Science.gov (United States)

2010-10-01

... 45 Public Welfare 1 2010-10-01 2010-10-01 false Official transcript. 99.27 Section 99.27 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL ADMINISTRATION PROCEDURE FOR HEARINGS FOR THE CHILD CARE AND DEVELOPMENT FUND Hearing Procedures § 99.27 Official transcript. The Department will...

Criminal Sanctions Against Official Corruption and other Offences Against Official Duty Offenders in Kosovo for the Period 2008-2015

Directory of Open Access Journals (Sweden)

Flutura Tahiraj

2017-08-01

Full Text Available The need to fight corruption, with the focus on official corruption in Kosovo continues to be addressed by both national and international reports. The objective of this paper is to find out the number of the cases and analyse the sactions against official corruption and other offences against official duty delivered by Municipality Courts in Kosovo during the period 2008-2015 with the aim to assess the developments during a period of eight years since most of the other researches are focused on annual performance of the courts. All data presented in this article are taken from the Kosovo Statistical Office and include statistical information on the types and frequency of criminal sanctions to perpetrators of the official corruption and other offences against official duty. Case study is also applied to analyse some court judgments. The study shows there is a slight incresase of the number of convicted perpetrators over years, the number of corruption cases addressed by the courts remained very limited, followed by low sentences or even prescription of cases. The findings will add additional scientific insights to the existing knowledge about preventing and fighting official corruption and it can be useful for scholars, policy makers and practitioners in Kosovo.

22 CFR 41.23 - Accredited officials in transit.

Science.gov (United States)

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Accredited officials in transit. 41.23 Section... transit. An accredited official of a foreign government intending to proceed in immediate and continuous transit through the United States on official business for that government is entitled to the benefits of...

Balance de potencia del conjunto formado por el tractor New Holland 6610s y la sembradora v-20

OpenAIRE

Pedro R. Mayans-Céspedes; José R. Soca-Cabrera; Gilberto López Canteñs

2009-01-01

En el presente trabajo se reflejan los resultados de la prueba de tracción y potencia a la toma de fuerza de la sembradora V-204, formando conjunto con el tractor New Holland 6610s4. Para las pruebas se contó con los instrumentos, medios de medición e instalaciones del Centro Nacional de Estandarización de Maquinaria Agrícola, utilizándose la NMX "Método de evaluación de sembradoras y/o fertilizadoras de tracción mecánica con dosificador de disco" y la NC Máquinas agropecuarias y forestales, ...

42 CFR 405.1834 - CMS reviewing official procedure.

Science.gov (United States)

2010-10-01

... 42 Public Health 2 2010-10-01 2010-10-01 false CMS reviewing official procedure. 405.1834 Section... Determinations and Appeals § 405.1834 CMS reviewing official procedure. (a) Scope. A provider that is a party to... Administrator by a designated CMS reviewing official who considers whether the decision of the intermediary...

C-Based Design Methodology and Topological Change for an Indian Agricultural Tractor Component

Science.gov (United States)

Matta, Anil Kumar; Raju, D. Ranga; Suman, K. N. S.; Kranthi, A. S.

2018-06-01

The failure of tractor components and their replacement has now become very common in India because of re-cycling, re-sale, and duplication. To over come the problem of failure we propose a design methodology for topological change co-simulating with software's. In the proposed Design methodology, the designer checks Paxial, Pcr, Pfailue, τ by hand calculations, from which refined topological changes of R.S.Arm are formed. We explained several techniques employed in the component for reduction, removal of rib material to change center of gravity and centroid point by using system C for mixed level simulation and faster topological changes. The design process in system C can be compiled and executed with software, TURBO C7. The modified component is developed in proE and analyzed in ANSYS. The topologically changed component with slot 120 × 4.75 × 32.5 mm at the center showed greater effectiveness than the original component.

C-Based Design Methodology and Topological Change for an Indian Agricultural Tractor Component

Science.gov (United States)

Matta, Anil Kumar; Raju, D. Ranga; Suman, K. N. S.; Kranthi, A. S.

2018-02-01

The failure of tractor components and their replacement has now become very common in India because of re-cycling, re-sale, and duplication. To over come the problem of failure we propose a design methodology for topological change co-simulating with software's. In the proposed Design methodology, the designer checks Paxial, Pcr, Pfailue, τ by hand calculations, from which refined topological changes of R.S.Arm are formed. We explained several techniques employed in the component for reduction, removal of rib material to change center of gravity and centroid point by using system C for mixed level simulation and faster topological changes. The design process in system C can be compiled and executed with software, TURBO C7. The modified component is developed in proE and analyzed in ANSYS. The topologically changed component with slot 120 × 4.75 × 32.5 mm at the center showed greater effectiveness than the original component.

Utilização de um sistema de aquisição automática de dados para avaliação dos níveis de ruído de um trator agrícola de pneus Utilization of a data automatic acquisition system for noise level evaluation of an agricultural tractor with tires

Directory of Open Access Journals (Sweden)

Paulo Fernando dos Santos Filho

2004-06-01

Full Text Available Este trabalho foi realizado na Faculdade de Engenharia de Guaratinguetá (FEG-UNESP, SP, no Laboratório de Vibração e Acústica, e numa área experimental localizada no município de Guaratinguetá, com os objetivos de determinar os níveis de ruído emitidos por um trator agrícola executando a operação de gradagem em diferentes velocidades de trabalho e analisar o conforto do operador, comparando os níveis obtidos com os recomendados pelas principais normas vigentes. Na avaliação dos níveis de ruído, utilizaram-se um trator de pneus de 55,2 kW (75 cv e uma grade destorroadora-niveladora "off-set" de 28 discos. O sistema de aquisição de dados foi constituído por sensores de ruído, condicionadores e amplificadores e um conversor analógico-digital instalados em um microcomputador e embarcados no trator ensaiado. Posteriormente, os dados foram tratados pelo Programa ORIGIN 50. Com base nos resultados, concluiu-se que o sistema trator-implemento emitiu níveis de ruído acima dos limites estipulados pelas normas, em todas as velocidades testadas.A study was carried out at the Faculdade de Engenharia de Guaratinguetá -FEG-UNESP, SP, in the acoustics and vibration laboratory as well as in an experimental area located in Guaratinguetá county. The objectives were to determine the noise levels emitted by an agricultural tire tractor during harrowing operation at different speeds and analyze the operator's comfort, by comparing the actual levels with the main effective norms. When evaluating noise levels, a 55.2 kW (75 hp tire tractor and an off-set 28-disk harrow were used. The data acquisition system consisted of some noise sensors, conditioners, amplifiers, and a digital-analogical converter plugged to a microcomputer and connected to the tractor tested. Later, the software ORIGIN 50 treated the data. Based on the obtained results, it was concluded that the noise levels emitted by the tractor-implement system exceeded the limits

Antropometria aplicada aos operadores de tratores agrícolas Anthropometrics applied to the agricultural tractors operators

Directory of Open Access Journals (Sweden)

José Fernando Schlosser

2002-12-01

Full Text Available O objetivo deste trabalho foi determinar o padrão antropométrico dos operadores de tratores agrícolas da Depressão Central do Rio Grande do Sul. Os operadores de tratores agrícolas foram medidos por meio de um painel constituído por duas chapas metálicas, permanecendo durante as medições em pé, eretos, com o mínimo de roupa possível e em contato com o painel. As variáveis medidas foram as seguintes: altura do corpo; altura ao nível dos olhos; altura ao nível dos olhos sentado; altura do cotovelo; alcance do braço; alcance da mão; distância pé-patela; apoio do assento. Os dados obtidos demonstram que há diferenças entre o biótipo do operador utilizado pela indústria de tratores agrícolas e o do operador da região, de forma que este último apresentou, para todas as medidas, à exceção do apoio do assento, uma média maior. Observa-se também que, para cada medida, os limites inferior e superior do intervalo onde se encontram 90% dos operadores avaliados foram, respectivamente, menores e maiores que o padrão utilizado pela indústria, caracterizando uma maior variação. Levando-se em consideração as diferenças existentes entre o perfil antropométrico dos operadores de tratores agrícolas da Depressão Central do Rio Grande do Sul e os parâmetros utilizados pela indústria, pode-se confirmar a hipótese de que os tratores agrícolas que se encontram atualmente em comercialização no Brasil podem não oferecer o conforto necessário ao operador desta região .The objective of this work was to evaluate the anthropometric measures of the agricultural tractor operators of the Central Region of Rio Grande do Sul State. The agricultural tractor operators were measured through a panel that was made of two metallic plates. During the measurement, they were standing, wearing the minimum amount clothes possible, and touching the panel. The measures body height, eyes level height (standing, eyes level height (sitting, elbow

36 CFR 907.4 - Designation of responsible Corporation official.

Science.gov (United States)

2010-07-01

... Corporation official. 907.4 Section 907.4 Parks, Forests, and Public Property PENNSYLVANIA AVENUE DEVELOPMENT CORPORATION ENVIRONMENTAL QUALITY § 907.4 Designation of responsible Corporation official. The Development Director is the Corporation official responsible for implementation and operation of the Corporation's...

Official Centre Hospitality

International Development Research Centre (IDRC) Digital Library (Canada)

Sylvain Dufour

Approved by the Management Executive Committee. - 1 -. Version 3.1.0 effective 2017-06-28. Official Centre Hospitality. 1. Objective. 2. Application. 3. Definitions. 4. Roles and Responsibilities. 5. Authorization. 6. Consultants and Contractors. 7. Reimbursement. 1. Objective. To define the circumstances under which ...

Official Japanese Version of the Movement Disorder Society-Unified Parkinson's Disease Rating Scale: validation against the original English version.

Science.gov (United States)

Kashihara, Kenichi; Kondo, Tomoyoshi; Mizuno, Yoshikuni; Kikuchi, Seiji; Kuno, Sadako; Hasegawa, Kazuko; Hattori, Nobutaka; Mochizuki, Hideki; Mori, Hideo; Murata, Miho; Nomoto, Masahiro; Takahashi, Ryosuke; Takeda, Atsushi; Tsuboi, Yoshio; Ugawa, Yoshikazu; Yamanmoto, Mitsutoshi; Yokochi, Fusako; Yoshii, Fumihito; Stebbins, Glenn T; Tilley, Barbara C; Luo, Sheng; Wang, Lu; LaPelle, Nancy R; Goetz, Christopher G

2014-09-01

The Movement Disorder Society (MDS)-sponsored revision of the Unified Parkinson's Disease (PD) Rating Scale (UPDRS) (MDS-UPDRS) has been developed and is now available in English. Part of the overall program includes the establishment of official non-English translations of the MDS-UPDRS. We present the process for completing the official Japanese translation of the MDS-UPDRS with clinimetric testing results. In this trial, the MDS-UPDRS was translated into Japanese, underwent cognitive pre-testing, and the translation was modified after taking the results into account. The final translation was approved as Official Working Draft of the MDS-UPDRS Japanese version and tested in 365 native-Japanese-speaking patients with PD. Confirmatory analyses were used to determine whether the factor structure for the English-language MDS-UPDRS could be confirmed in data collected using the Official Working Draft of the Japanese translation. As a secondary analysis, we used exploratory factor analyses to examine the underlying factor structure without the constraint of a pre-specified factor organization. Confirmatory factor analysis revealed that Comparative Fit Index for all Parts of the MDS-UPDRS exceeded the minimal standard of 0.90 relative to the English version and therefore Japanese translation met the pre-specified criterion to be designated called an OFFICIAL MDS TRANSLATION. Secondary analyses revealed some differences between the English-language MDS-UPDRS and the Japanese translation, however, these differences were considered to be within an acceptable range. The Japanese version of the MDS-UPDRS met the criterion as an Official MDS Translation and is now available for use (www.movementdisorders.org).

7 CFR 54.12 - Financial interest of official grader.

Science.gov (United States)

2010-01-01

... SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) REGULATIONS... Service § 54.12 Financial interest of official grader. No official grader shall grade or determine... 7 Agriculture 3 2010-01-01 2010-01-01 false Financial interest of official grader. 54.12 Section...

Pioneering SESAME light source officially opened

CERN Multimedia

Caraban Gonzalez, Noemi

2017-01-01

Allan, Jordan, 16 May 2017. The SESAME light source was today officially opened by His Majesty King Abdullah II. An intergovernmental organization, SESAME is the first regional laboratory for the Middle East and neighbouring regions The laboratory’s official opening ushers in a new era of research covering fields ranging from medicine and biology, through materials science, physics and chemistry to healthcare, the environment, agriculture and archaeology.

Presentation of the Well Tractor Concept and practical experience in extreme conditions; Vorstellung des Well Tractor Konzepts mit Erfahrungen bei Einsaetzen unter Extrembedingungen

Energy Technology Data Exchange (ETDEWEB)

Kater, H.; Preiss, F. [Preussag Wireline- und Messservice, Edemissen (Germany)

1998-12-31

So-called extended reach boreholes with horizontal sections of more than 2000 m, short radius drilling, multilaterals and other variations are common enough. Problems occur when this type of borehole needs to be surveyed or modified. The contribution describes the newly developed ``Well Tracotor{sup circledR}`` technology and outlines its potential. (orig.) [Deutsch] Sogenannte Extended Reach Bohrungen mit Horizontalsektionen von mehr als 2.000 Meter Laenge, Short Radius Drilling, Multilaterals und andere Variationen sind bohrtechnisch einwandfrei durchfuehrbar und gehoeren zum gaengigen Repertoire der Bohrfirmen. Grosse Probleme entstehen jedoch wenn dieser Bohrungstyp vermessen, komplettiert oder aufgewaeltigt werden soll. Insbesondere Bohrlochmessfirmen haben es in den letzten ca. 20 Jahren versaeumt Innovationen zwecks oekonomischen Einsatzes ihrer Technologie in diesen Bohrungen bereitzustellen. Die Durchfuehrung von Perforationen und Bohrlochmessungen, das Setzen von Stopfen, Schneiden von Rohren und auch einfachste Slickline-Operationen sind bei einer Bohrlochneigung beginnend bei ca. 60 bis 80 nur unter Anwendung von kosten- und zeitintensiven Verfahren moeglich. Eine guenstige Alternative zu diesen Verfahren bietet der Well Tractor. Diese Technologie ermoeglicht das Einfahren von Geraeten, die ueblicherweise am Kabel oder Draht eingesetzt werden, in Horizontalbohrungen. Im Folgenden werden das technische Konzept, ein Vergleich mit alternativen Verfahren, und verschiedene Referenzen des Well Tracotors {sup trademark} dargestellt. Weiterhin wird auf die Modifikationen eingegangen, die noetig waren, um dieses Geraet den Gegebenheiten in tiefen, heissen Gasbohrungen anzupassen. Abschliessend soll durch einen Ausblick auf zum Teil schon im Feldtest befindliche Weiterentwicklungen das weitere Potential dieser Technologie aufgezeichnet werden. (orig.)

5 CFR 2638.204 - Deputy ethics official.

Science.gov (United States)

2010-01-01

... 5 Administrative Personnel 3 2010-01-01 2010-01-01 false Deputy ethics official. 2638.204 Section 2638.204 Administrative Personnel OFFICE OF GOVERNMENT ETHICS GOVERNMENT ETHICS OFFICE OF GOVERNMENT ETHICS AND EXECUTIVE AGENCY ETHICS PROGRAM RESPONSIBILITIES Designated Agency Ethics Official § 2638.204...

The View of Religious Officials on Organ Donation and Transplantation in the Zeytinburnu District of Istanbul.

Science.gov (United States)

Tarhan, Merve; Dalar, Levent; Yildirimoglu, Huseyin; Sayar, Adnan; Altin, Sedat

2015-12-01

One of the obstacles to organ donation and transplantation in Turkey is that of religious beliefs and, at this point, religious officials constitute a key aspect of this problem. Positive or negative viewpoints held by religious officials regarding organ donation and transplantation are influential in guiding the public. This descriptive study was conducted for the purpose of describing religious officials' viewpoints on this subject. To determine the opinions of 40 religious officials from among the imams and muezzins working in Zeytinburnu District Mufti (Religious Officials Superior) Station who participated in a normal meeting in April and who fully completed the survey. A 27-question survey form was used that consisted of open-ended and closed questions, 5 of which were on socio-demographic characteristics, 13 on viewpoints on organ donation and transplantation, and 9 on the Islamic viewpoint regarding organ donation and transplantation. For the analysis of the results, Student's t test and one-way ANOVA tests were used. It was found that all of the religious officials believed in the importance of organ donation, 80 % considered donating their organs, and 5 % had made an organ donation. Of the religious officials who had not donated organs, 35 % gave an answer that there was no specific reason and 27.5 % stated that they had never considered the subject. While the number of those stating that they would donate the organs of a close associate who had died, 77.5 % of them who did not want to donate gave as their reason the idea that if it were him, he would perhaps not want to give his organs after death. Of the religious officials questioned, 92.5 % asserted that the religion of Islam looked positively on organ donation and transplantation, 55 % stated that the knowledge of religious officials in the country was inadequate regarding this subject, and 65 % said that for interest in organ donation to increase, religious officials should make speeches and raise

Online and official price indexes: Measuring Argentina's inflation

OpenAIRE

Cavallo, Alberto F.

2013-01-01

Prices collected from online retailers can be used to construct daily price indexes that complement official statistics. This paper studies their ability to match official inflation estimates in five Latin American countries, with a focus on Argentina, where official statistics have been heavily criticized in recent years. The data were collected between October 2007 and March 2011 from the largest supermarket in each country. In Brazil, Chile, Colombia, and Venezuela, online price indexes ap...

45 CFR 73.735-202 - Management officials.

Science.gov (United States)

2010-10-01

...) Department Ethics Counselor. The Assistant General Counsel, Business and Administrative Law Division, shall... 45 Public Welfare 1 2010-10-01 2010-10-01 false Management officials. 73.735-202 Section 73.735... Responsibilities § 73.735-202 Management officials. (a) The Department has an obligation to enforce the...

6 CFR 13.5 - Review by the Reviewing Official.

Science.gov (United States)

2010-01-01

... 6 Domestic Security 1 2010-01-01 2010-01-01 false Review by the Reviewing Official. 13.5 Section 13.5 Domestic Security DEPARTMENT OF HOMELAND SECURITY, OFFICE OF THE SECRETARY PROGRAM FRAUD CIVIL REMEDIES § 13.5 Review by the Reviewing Official. (a) If, based on the report of the Investigating Official...

7 CFR 37.8 - Financial interest of official.

Science.gov (United States)

2010-01-01

... REGULATIONS PROGRAM TO ASSESS ORGANIC CERTIFYING AGENCIES § 37.8 Financial interest of official. No auditor or other Department official shall review any programs or documents concerning a certification program in...

EnCE EnCase computer forensics : the official EnCase certified examiner : study guide

CERN Document Server

Bunting, Steve

2012-01-01

The official, Guidance Software-approved book on the newest EnCE exam! The EnCE exam tests that computer forensic analysts and examiners have thoroughly mastered computer investigation methodologies, as well as the use of Guidance Software's EnCase Forensic 7. The only official Guidance-endorsed study guide on the topic, this book prepares you for the exam with extensive coverage of all exam topics, real-world scenarios, hands-on exercises, up-to-date legal information, and sample evidence files, flashcards, and more. Guides readers through preparation for the newest EnCase Certified Examiner

Desempenho de um trator em função do tipo de pneu, da lastragem e da velocidade de trabalho Performance of an tractor as a function of tire type, ballasting and forward speed

Directory of Open Access Journals (Sweden)

Afonso Lopes

2005-04-01

Full Text Available O trabalho comparou o desempenho de um trator agrícola 4x2 TDA de 89 kW (121cv em função do tipo de pneus (radial, diagonal e de baixa pressão, a condição de lastragem (com e sem água nos pneus e quatro velocidades [V1 (1,84km h-1, V2 (3,18km h-1, V3 (4,57km h-1, V4 (5,04km h-1]. O experimento foi realizado na UNESP-Jaboticabal-SP, em condição de preparo do solo com escarificador de sete hastes a 30cm de profundidade. Os pneus foram do tipo R1, com as seguintes características: [radial (dianteiros-14.9 R 26; traseiros-620/75 R 30 diagonal (dianteiros-14.9-26, traseiros-23.1-30 e BPAF (dianteiros-500/60-26.5; traseiros-700/55-34]. O delineamento experimental foi blocos casualizados, em esquema fatorial 3x2x4, com 24 tratamentos e três repetições. Os resultados evidenciaram vantagens para o trator equipado com pneus radiais.The objective of this study was to compare the performance of the FWD agricultural tractor, equipped with three types of tires (bias ply, radial and low pressure, with and without tire water ballasting, operating in four forward speed. The research was carried out at UNESP, SP, Brazil, with the tractor pulling a chisel plow. A tractor with 89kW (121cv engine power equipped with FWD, was used in the experiment, and the tires used had the following characteristics: radial (front: 14.9R26 and rear: 620/75R30, bias ply (front: 14.9-26 and rear: 23.1-30 and low pressure (front: 500/60-26.5 and rear: 700/55-34. The experiment was conducted in a completely randomized block, design (3x2x4, with 24 treatments and three replications. The results evidenced advantages for the tractor equipped with radial tires.

Official showguide

International Nuclear Information System (INIS)

1998-01-01

This national petroleum show was an opportunity for companies from around the world to showcase their products and services and to demonstrate the world's best in energy technologies. This official showguide lists the technical presentations made at the show, and provides an exhibitor profile for each company, including the company name, address, phone and fax number, and a brief description of the product or services they offer. An alphabetical listing of approximately 900 companies and their booth locations is also included

Official regulations and perceptual aspects of bell ringing

Directory of Open Access Journals (Sweden)

Kovačič Mojca

2017-01-01

Full Text Available Through the analytical approach of studying official and perception-related discourse on bell ringing I accentuate the complexity of aspects that the sound of church bell presents in contemporary society. I point out the misleading officially defined level of noise nuisance and reveal how, when and why bell ringing is perceived as a positive or negative part of the acoustic environment. The study argues for a holistic approach to the noise nuisance issues, still much underestimated in the official discourse, that co-create our everyday soundscape.

From Quality to Information Quality in Official Statistics

Directory of Open Access Journals (Sweden)

Kenett Ron S.

2016-12-01

Full Text Available The term quality of statistical data, developed and used in official statistics and international organizations such as the International Monetary Fund (IMF and the Organisation for Economic Co-operation and Development (OECD, refers to the usefulness of summary statistics generated by producers of official statistics. Similarly, in the context of survey quality, official agencies such as Eurostat, National Center for Science and Engineering Statistics (NCSES, and Statistics Canada have created dimensions for evaluating the quality of a survey and its ability to report ‘accurate survey data’.

Pressão de insuflagem dos pneus no desempenho do conjunto trator-grade de discos Tire inflation pressure effects on tractor disc harrow performance

Directory of Open Access Journals (Sweden)

João Manuel Pereira Ramalho Serrano

2008-02-01

Full Text Available O objetivo deste trabalho foi avaliar o efeito da pressão de insuflagem dos pneus nos parâmetros de desempenho do conjunto trator-grade de discos. As pressões avaliadas foram: 100 kPa nos pneus da frente e 70 kPa nos pneus atrás; 140 kPa nos quatro pneus; 190 kPa nos quatro pneus. Os testes de um trator com grades de discos foram desenvolvidos em condições de campo, em solos de textura franca, mobilizados e secos. Os parâmetros de avaliação foram: o patinamento, a velocidade, a capacidade de trabalho, a eficiência energética global e o consumo de combustível por hectare. Entre as situações de pressão de insuflagem dos pneus indicadas pelo fabricante do trator e a pressão de insuflagem indicada pelo fabricante dos pneus, não se verificam diferenças significativas, tanto na capacidade de trabalho como no consumo de combustível por hectare. A utilização de elevadas pressões de insuflagem dos pneus conduz a uma redução da ordem de 3 a 5% na capacidade de trabalho e um aumento significativo entre 10 e 25% do consumo de combustível por hectare, mesmo em condições de boa aderência dos pneus, refletidas no intervalo de 7 a 15% de patinamento registrados.The objective of this work was to evaluate the tire inflation pressure effects on tractor disc harrow performance. The pressures tested were: 100 kPa in front tires and 70 kPa in rear tires; 140 kPa in the tires of both axles; 190 kPa in the tires of both axles. Field tests with disc harrow in secondary tillage were performed under real working conditions, in tilled and dry medium textured soils. The evaluation parameters were: the slip, the actual forward speed, the work capacity, the overall energy efficiency and the fuel consumption per hectare. Concerning the situations of tire inflation pressure specified by the tractor manufacturer and the inflation pressure specified by the tire manufacturer, there were no significant differences, both in work capacity and in fuel

Acidentes de trabalho envolvendo conjuntos tratorizados em propriedades rurais do Rio Grande do Sul, Brasil Work accidents involving tractor-implement systems in farms of Rio Grande do Sul State, Brazil

Directory of Open Access Journals (Sweden)

Henrique Debiasi

2004-06-01

Full Text Available O presente trabalho teve como objetivo determinar as causas genéricas e específicas dos acidentes de trabalho envolvendo conjuntos tratorizados, no intuito de subsidiar a tomada de medidas mais efetivas de prevenção dos mesmos. A pesquisa foi executada em 21 municípios pertencentes a três microregiões geográficas do Rio Grande do Sul: Santa Maria, Restinga Seca e Cachoeira do Sul. Foram amostradas aleatoriamente 114 propriedades, dentro das quais 141 operadores foram entrevistados. Os acidentes analisados foram tanto aqueles ocorridos com o proprietário ou empregados da propriedade amostrada como aqueles ocorridos com operadores não pertencentes à propriedade, mas dos quais os entrevistados tinham conhecimento. 82% dos acidentes de trabalho envolvendo conjuntos tratorizados foram causados por atitudes inseguras e 18% por condições inseguras. As principais causas específicas de acidentes foram a operação do trator em condições para as quais não foi projetado, a perda de controle em aclives/declives, a permissão de carona e o consumo excessivo de álcool. Com base nestes resultados, pode-se concluir que as ações visando à prevenção dos acidentes de trabalho envolvendo conjuntos tratorizados devem dar ênfase à eliminação das causas específicas apuradas.The objective of this work was to determine generic and specific causes of work accidents involving tractor-implement systems, to help taking more effective prevetion measures. The research was carried out in twenty-one municipal districts belonging to three regions of Rio Grande do Sul State, Brazil: Santa Maria, Restinga Seca e Cachoeira do Sul. 114 farms were randomly sampled in these regions, in which 141 operators were evaluated. The accidents analyzed were both te ones that occurred with the owner or employees of the same farm and the ones that occured with operators not belonging that farm - but whose cases were known by the interwiees - 82% of the work accidents

21 CFR 1316.63 - Official transcript; index; corrections.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 9 2010-04-01 2010-04-01 false Official transcript; index; corrections. 1316.63 Section 1316.63 Food and Drugs DRUG ENFORCEMENT ADMINISTRATION, DEPARTMENT OF JUSTICE ADMINISTRATIVE FUNCTIONS, PRACTICES, AND PROCEDURES Administrative Hearings § 1316.63 Official transcript; index...

Official Union Time Tracking System

Data.gov (United States)

Social Security Administration — Official Union Time Tracking System captures the reporting and accounting of the representational activity for all American Federation of Government Employees (AFGE)...

39 CFR 601.108 - SDR Official disagreement resolution.

Science.gov (United States)

2010-07-01

... purchasing decisions and the administrative records concerning those decisions. All disagreements under § 601... time to lodge a disagreement lapses. (e) Disagreement decision process. The SDR Official will promptly...: INTELLECTUAL PROPERTY RIGHTS OTHER THAN PATENTS PURCHASING OF PROPERTY AND SERVICES § 601.108 SDR Official...

Official Publications Section. Collections and Services Division. Papers.

Science.gov (United States)

International Federation of Library Associations, The Hague (Netherlands).

Papers on official publications (government documents), automation, and electronic publishing, which were presented at the 1983 International Federation of Library Associations (IFLA) conference, include: (1) "The Automation of Documentation as It Relates to Official Publications and Its Importance in a Developing Country" by Ahmed…

Analisis dan Perancangan Aplikasi Pendukung Erp Sap R/3 Modul Sales and Distribution PT. United Tractors, Tbk

Directory of Open Access Journals (Sweden)

Johan Johan

2010-12-01

Full Text Available The purpose of this research is to analyse sales process having been implementing Sales and Distribution module of ERP SAP R/3 and also to design a supporting application for sales process at PT United Tractor, Tbk. The benefit of this application is to help sales person and customer in doing inquiries, quotation and sales order also material information through short message. The method of this research is data capturing, literature review, object oriented analysis and design and Rational Unified process including UML ( Unified Modeling Language for application design. Based on the problem, we designed a web based and sms gateway application to support Sales and Distribution module ERP SAP R/3 to help customer and sales person in doing sales transaction and information inquiry. 

50 CFR 401.20 - Officials not to benefit.

Science.gov (United States)

2010-10-01

... 50 Wildlife and Fisheries 7 2010-10-01 2010-10-01 false Officials not to benefit. 401.20 Section... ADMINISTRATION, DEPARTMENT OF COMMERCE); ENDANGERED SPECIES COMMITTEE REGULATIONS SUBCHAPTER A ANADROMOUS FISHERIES CONSERVATION, DEVELOPMENT AND ENHANCEMENT § 401.20 Officials not to benefit. No Member of, or...

THE USE OF OFFICIAL LANGUAGES ACT: DIVERSITY AFFIRMED?

Directory of Open Access Journals (Sweden)

JL (Loot Pretorius

2013-04-01

Full Text Available SUMMARYA full sixteen years after the coming into force of the 1996 Constitution, Parliament responded to the constitutional obligation to regulate and monitor, by legislative and other means, the use of official languages by adopting the Use of Official Languages Act 12 of 2012. The Act represents a very limited normative appreciation of this constitutional instruction. The official language clause of the Constitution expresses a normative commitment regarding the positive affirmation of linguistic diversity, which is directly informed by and closely aligned to the core normative values of the Constitution. The Constitution’s positive evaluation of difference, including linguistic difference, inter alia, flows from the values of substantive equality, equal citizenship, dignity and proportionality. However, the way in which the Act institutionalises the promotion of inclusive linguistic diversity does not reflect an unambiguous recognition of this obligation being normatively embedded in the foundational value structure of the Constitution. The real responsibility for decisions regarding official language use is located in the policy-making competence of non-independent administrative bodies. The Act itself is devoid of instructive standards of its own to guide administrative decision-making regarding official language use. This results in the responsibility for making the most important normative choices regarding the use of official languages not being reserved for the legislative process, but entrusted to non-independent advisory administrative bodies. The nature of the Act confirms that it never was the intention of the government to be bound by legislation in this respect. This modus operandi is democratically deficient and compromises both the separation of powers and the principle of legal certainty as fundamental tenets of the rule of law.

Komunikasi Corporate Social Responsibility pada Official Website Perusahaan Badan Usaha Milik Negara

Directory of Open Access Journals (Sweden)

Nurjannah Nurjannah

2017-05-01

Full Text Available This study describes Corporate Social Responsibility (CSR message on official website of State Owned Enterprises (SOEs and features of official website as CSR communication medium. Quantitative content analysis is used as the method. Data were analyzed by using descriptive statistics. This study selected 55 Indonesian SOEs official website. The result shows that state-owned companies have not applied transparency of CSR communication messages on their official website. The study finds that a number of state-owned companies do not present CSR information on their official website. In general, CSR communication on the official website of state-owned companies is limited to presenting information related to government program called Partnership Program and Community Development (PKBL. The official websites of state-owned companies have not utilized potential use of the website as communication medium of CSR. State-owned companies have not fully realized the role of official website as strategic media in conveying CSR communication message.

Official Basketball Rules for Girls and Women. July 1972 - July 1973. Reprint.

Science.gov (United States)

American Association for Health, Physical Education, and Recreation, Washington, DC. Div. for Girls and Women's Sports.

The official American Association for Health, Physical Education, and Recreation (AAHPER) rules for girls and women's basketball, July 1972 - July 1973 are listed. Exact court measurements are given as are official scoring rules, timing procedures, duties of officials, definition of playing terms, violations and penalties, and officials' signals.…

12 CFR 701.33 - Reimbursement, insurance, and indemnification of officials and employees.

Science.gov (United States)

2010-01-01

... specifically excludes: (i) Payment (by reimbursement to an official or direct credit union payment to a third... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Reimbursement, insurance, and indemnification... Reimbursement, insurance, and indemnification of officials and employees. (a) Official. An official is a person...

39 CFR 273.6 - Evaluation by reviewing official.

Science.gov (United States)

2010-07-01

... supports the allegations of liability; (4) An estimate of the amount of money or the value of property or...)(4) and (5) of this section, the Reviewing Official recommends be demanded from the person alleged to... PROGRAM FRAUD CIVIL REMEDIES ACT § 273.6 Evaluation by reviewing official. (a) Based upon the...

25 CFR 39.408 - What are the responsibilities of administrative officials?

Science.gov (United States)

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false What are the responsibilities of administrative officials... INDIAN SCHOOL EQUALIZATION PROGRAM Accountability § 39.408 What are the responsibilities of administrative officials? Administrative officials have the following responsibilities: (a) Applying the...

Biochemical Differences Between Official and Simulated Mixed Martial Arts (MMA) Matches.

Science.gov (United States)

Silveira Coswig, Victor; Hideyoshi Fukuda, David; de Paula Ramos, Solange; Boscolo Del Vecchio, Fabricio

2016-06-01

One of the goals for training in combat sports is to mimic real situations. For mixed martial arts (MMA), simulated sparring matches are a frequent component during training, but a there is a lack of knowledge considering the differences in sparring and competitive environments. The main objective of this study was to compare biochemical responses to sparring and official MMA matches. Twenty five male professional MMA fighters were evaluated during official events (OFF = 12) and simulated matches (SIM = 13). For both situations, blood samples were taken before (PRE) and immediately after (POST) matches. For statistical analysis, two-way analysis of variance (time x group and time x winner) were used to compare the dependent parametric variables. For non-parametric data, the Kruskal-Wallis test was used and differences were confirmed by Mann-Whitney tests. No significant differences were observed among the groups for demographic variables. The athletes were 26.5 ± 5 years with 80 ± 10 kg, 1.74 ± 0.05 m and had 39.4 ± 25 months of training experience. Primary results indicated higher blood glucose concentration prior to fights for OFF group (OFF= 6.1 ± 1.2 mmol/L and SIM= 4.4 ± 0.7 mmol/L; P < 0.01) and higher ALT values for OFF group at both time points (OFF: PRE = 41.2 ± 12 U/L, POST = 44.2 ± 14.1 U/L; SIM: PRE = 28.1 ± 13.8 U/L, POST = 30.5 ± 12.5 U/L; P = 0.001). In addition, the blood lactate showed similar responses for both groups (OFF: PRE= 4 [3.4 - 4.4] mmol/L, POST= 16.9 [13.8 - 23.5] mmol/L; SIM: PRE = 3.8 [2.8 - 5.5] mmol/L, POST= 16.8 [12.3 - 19.2] mmol/L; P < 0.001). In conclusion, MMA official and simulated matches induce similar high intensity glycolytic demands and minimal changes to biochemical markers of muscle damage immediately following the fights. Glycolytic availability prior to the fights was raised exclusively in response to official matches.

9 CFR 325.7 - Shipment of products requiring special supervision between official establishments under official...

Science.gov (United States)

2010-01-01

... Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND... subchapter, in railroad cars, trucks, or other means of conveyance sealed with the official seal of the...

Full-scale tests of spent-nuclear-fuel shipping systems

International Nuclear Information System (INIS)

Yoshimura, H.R.; Huerta, M.

1976-01-01

Sandia Laboratories will be conducting, for the U.S. Energy Research and Development Administration, a series of tests involving spent-nuclear-fuel shipping systems. Large shipping casks in the 20500 to 70000-kg range will be included in the following full-scale tests: (1) Runaway tractor-trailer crash into a solid concrete barrier while carrying a shipping cask. (2) High-speed locomotive grade-crossing impact with a truck carrying a shipping cask. (3) High-speed derailment, collision, and fire involving a special railcar and shipping cask. The hardware and testing procedures for each of the tests are described. The analysis conducted in advance of the tests addresses the modelling technique used and a description of the scale-model tests. Analytical modelling being done before running the full-scale tests is also described. (author)

5 CFR 610.123 - Travel on official time.

Science.gov (United States)

2010-01-01

... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Travel on official time. 610.123 Section... DUTY Weekly and Daily Scheduling of Work Work Schedules § 610.123 Travel on official time. Insofar as practicable travel during nonduty hours shall not be required of an employee. When it is essential that this...

Influences of Training on Individual Outcomes for High School Sports Officials

Directory of Open Access Journals (Sweden)

Timothy D. Ryan

2014-04-01

Full Text Available The primary purpose of this study was to explore the influences of training on specific quality of work outcomes of job satisfaction, pay satisfaction, and intentions to leave within high school sports officials. Evidence suggests that there is a shortage of high school officials in all categories of high school sport. Via a web-based survey, we explored the effects of training on the individual outcomes under study. Results indicated that the level of training had a significant effect on job satisfaction, pay satisfaction, and turnover intentions. Analyses indicated that officials with less training had higher turnover intentions and lower job satisfaction than officials who had more training. Conversely, officials who engaged numerous training hours had lower pay satisfaction. This exploratory study supports the importance of training high school officials but, more importantly, provides an initial assessment on the reverse effects of training on pay satisfaction.

Occupational stress and cardiovascular risk factors in high-ranking government officials and office workers.

Science.gov (United States)

Mirmohammadi, Seyyed Jalil; Taheri, Mahmoud; Mehrparvar, Amir Houshang; Heydari, Mohammad; Saadati Kanafi, Ali; Mostaghaci, Mehrdad

2014-08-01

Cardiovascular diseases are among the most important sources of mortality and morbidity, and have a high disease burden. There are some major well-known risk factors, which contribute to the development of these diseases. Occupational stress is caused due to imbalance between job demands and individual's ability, and it has been implicated as an etiology for cardiovascular diseases. This study was conducted to evaluate the cardiovascular risk factors and different dimensions of occupational stress in high-ranking government officials, comparing an age and sex-matched group of office workers with them. We invited 90 high-ranking officials who managed the main governmental offices in a city, and 90 age and sex-matched office workers. The subjects were required to fill the occupational role questionnaire (Osipow) which evaluated their personal and medical history as well as occupational stress. Then, we performed physical examination and laboratory tests to check for cardiovascular risk factors. Finally, the frequency of cardiovascular risk factors and occupational stress of two groups were compared. High-ranking officials in our study had less work experience in their current jobs and smoked fewer pack-years of cigarette, but they had higher waist and hip circumference, higher triglyceride level, more stress from role overload and responsibility, and higher total stress score. Our group of office workers had more occupational stress because of role ambiguity and insufficiency, but their overall job stress was less than officials. The officials have higher scores in some dimensions of occupational stress and higher overall stress score. Some cardiovascular risk factors were also more frequent in managers.

47 CFR 1.359 - Proof of official record; authentication of copy.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 1 2010-10-01 2010-10-01 false Proof of official record; authentication of copy. 1.359 Section 1.359 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL PRACTICE AND PROCEDURE Hearing Proceedings Evidence § 1.359 Proof of official record; authentication of copy. An official...

A method for handlebars ballast calculation in order to reduce vibrations transmissibility in walk behind tractors

Directory of Open Access Journals (Sweden)

Angelo Fabbri

2017-06-01

Full Text Available Walk behind tractors have some advantages over other agricultural machines, such as the cheapness and the easy to use, however the driver is exposed to high level of vibrations transmitted from handles to hand-arm system and to shoulders. The vibrations induce discomfort and early fatigue to the operator. In order to control the vibration transmissibility, a ballast mass may be added to the handles. Even if the determination of the appropriate ballast mass is a critical point in the handle design. The aim of this research was to study the influence of the handle mass modification, on the dynamic structure behaviour. Modal frequencies and subsequent transmissibility calculated by using an analytical approach and a finite elements model, were compared. A good agreement between the results obtained by the two methods was found (average percentage difference calculated on natural frequencies equal to 5.8±3.8%. Power tillers are made generally by small or medium-small size manufacturers that have difficulties in dealing with finite element codes or modal analysis techniques. As a consequence, the proposed analytical method could be used to find the optimal ballast mass in a simple and economic way, without experimental tests or complex finite element codes. A specific and very simple software or spreadsheet, developed on the base of the analytical method here discussed, could effectively to help the manufacturers in the handlebar design phase. The choice of the correct elastic mount, the dimensioning of the guide members and the ballast mass could be considerably simplified.

25 CFR 700.509 - Duties of the designated agency ethics official.

Science.gov (United States)

2010-04-01

... 25 Indians 2 2010-04-01 2010-04-01 false Duties of the designated agency ethics official. 700.509... RELOCATION PROCEDURES Employee Responsibility and Conduct § 700.509 Duties of the designated agency ethics official. The Designated Agency Ethics Official shall coordinate and manage the agency's ethics program...

An automatic driving system for a Baker's garlic [Allium chinense] planter: Development of the infrared beam guidance system

International Nuclear Information System (INIS)

Tanaka, H.; Iwasaki, M.; Takeda, H.

2002-01-01

We have developed a tractor attachment type semi-automatic Baker's garlic (shallot) planter to save hard labor requirement during planting. The velocity of the tractor in operation is so slow (2 to 3m/min) that the tractor driver is forced to tie his hands for a long time. This is an obstacle to its diffusion, because farm managers have to drive their own tractors by themselves in most Japanese farmhouses, yet they have to do other jobs during the planting season. We designed a new automatic driving system that consists of one infrared beam radiator and two infrared beam receivers to solve this problem. The infrared radiator is located in front of the tractor and shows the infrared guideline of tractor path. The infrared receivers are equipped on the front of the tractor and detect the infrared from the radiator. The receivers are arranged symmetrically at 4.5 degree from the center of the tractor. So the misalignment of the tractor creates a difference in sensitivity and it is possible to distinguish the tractor direction against the infrared beam. This system was tested under the sand dune field conditions with the tractor that was converted to automatic driving. The results show the system can effectively steer about 80 m automatically with an almost straight path, and the error from the starting point is within 0.1 m

Intercomparisons to establish official methods for the detection of irradiated foods

International Nuclear Information System (INIS)

Spiegelberg, A.; Schulzki, G.; Bogl, K.W.; Schreiber, G.A.

1994-01-01

Irradiation of food for the purpose of extension of shelf life, control of microbial load, reduction of pathogenic microorganisms and disinfection is considered by many consumers with suspicion. Our studies concentrate on the establishment of official methods suitable for routine control measurements. Special emphasis is given to following methods: thermoluminescence (TL) analysis of minerals isolated from various foods, like spices, herbs, dried vegetables, teas, fruits or vegetables; electron spin resonance (ESR) spectroscopy of food components or whole foods that have a low water content, such as bones, first bones, shells, peels seeds, pips or dried fruits and detection of volatile hydrocarbons in the lipid fraction of fat containing food by gas-chromatographic analysis (GC). All three methods have been tested on a variety of foods within large scale intercomparisons between German food controlling laboratories. In Germany official methods could be established for detection of irradiated spices, spice mixtures and fruits by TL, of meat with bones, nuts and fish by ESR, and of chicken, pork and beef meat by GC. The latest intercomparisons have tested these methods for the detection of potatoes and shrimps by TL, of red paper and shrimps by ESR and of mangoes, papayas, avocados and cheese - by GC. Results were presented. (author)

Legal Regimes of Official Information in Ukraine

Directory of Open Access Journals (Sweden)

Serhii Yesimov

2018-04-01

Full Text Available In the article on the basis of the methodology of system analysis the legal nature and sources of legal regulation of the legal regime of official information in Ukraine in the conditions of adaptation of Ukrainian legislation to the legislation of the European Union are considered. A comparative legal analysis of official information in the public-law and private-law spheres in the context of legal regimes of restricted information, confidential information and information classified as state secrets has been conducted.

Official portrait of the STS 61-B crew

Science.gov (United States)

1985-01-01

Official portrait of the STS 61-B crew. Kneeling next to the Official mission emblam are Astronaut Brewster Shaw, Jr., (right), mission commander; and Bryan D. O'Conner (left), pilot. In the back row are (l.-r.) Charles D. Walker, McDonnell Douglas payload specialist; Jerry L. Ross, Mary L. Cleve and Sherwood C. Spring -- all mission specialists; and Rodolfo Neri, Morelos payload specialist.

Official CERN holidays | Restaurant opening hours

CERN Multimedia

2013-01-01

Please note that the CERN Restaurants will have the following opening hours during the upcoming holidays: Restaurant #1 will be open from 7 a.m. to 11 p.m. on Wednesday 1 May, Thursday 9 May (Ascension Thursday) and Monday 20 May (Pentecost) - on Friday 10 May the restaurant will be open at the usual times. Restaurant #2 will be closed over the 3 official CERN holidays, but will be open on Friday 10 May at the usual times (brasserie will be closed). Restaurant #3 will be closed over the 3 official CERN holidays, as well as Friday 10 May.

Genetic algorithm based on optimization of neural network structure for fault diagnosis of the clutch retainer mechanism of MF 285 tractor

Directory of Open Access Journals (Sweden)

S. F Mousavi

2016-09-01

Full Text Available Introduction The diagnosis of agricultural machinery faults must be performed at an opportune time, in order to fulfill the agricultural operations in a timely manner and to optimize the accuracy and the integrity of a system, proper monitoring and fault diagnosis of the rotating parts is required. With development of fault diagnosis methods of rotating equipment, especially bearing failure, the security, performance and availability of machines has been increasing. In general, fault detection is conducted through a specific procedure which starts with data acquisition and continues with features extraction, and subsequently failure of the machine would be detected. Several practical methods have been introduced for fault detection in rotating parts of machineries. The review of the literature shows that both Artificial Neural Networks (ANN and Support Vector Machines (SVM have been used for this purpose. However, the results show that SVM is more effective than Artificial Neural Networks in fault detection of such machineries. In some smart detection systems, incorporating an optimized method such as Genetic Algorithm in the Neural Network model, could improve the fault detection procedure. Consequently, the fault detection performance of neural networks may also be improved by combining with the Genetic Algorithm and hence will be comparable with the performance of the Support Vector Machine. In this study, the so called Genetic Algorithm (GA method was used to optimize the structure of the Artificial Neural Networks (ANN for fault detection of the clutch retainer mechanism of Massey Ferguson 285 tractor. Materials and Methods The test rig consists of some electro mechanical parts including the clutch retainer mechanism of Massey Ferguson 285 tractor, a supporting shaft, a single-phase electric motor, a loading mechanism to model the load of the tractor clutch and the corresponding power train gears. The data acquisition section consists of a

Stressors among South African soccer officials: A profile analysis ...

African Journals Online (AJOL)

The purpose of this study was to determine the contribution of selected stressors to the level of stress experienced by South African soccer officials. Forty-two South African Football Association (SAFA) accredited officials, attending a training camp in Potchefstroom, participated in this study. The group comprised of 40 male ...

Toward Global Comparability of Sexual Orientation Data in Official Statistics: A Conceptual Framework of Sexual Orientation for Health Data Collection in New Zealand's Official Statistics System

Science.gov (United States)

Gray, Alistair; Veale, Jaimie F.; Binson, Diane; Sell, Randell L.

2013-01-01

Objective. Effectively addressing health disparities experienced by sexual minority populations requires high-quality official data on sexual orientation. We developed a conceptual framework of sexual orientation to improve the quality of sexual orientation data in New Zealand's Official Statistics System. Methods. We reviewed conceptual and methodological literature, culminating in a draft framework. To improve the framework, we held focus groups and key-informant interviews with sexual minority stakeholders and producers and consumers of official statistics. An advisory board of experts provided additional guidance. Results. The framework proposes working definitions of the sexual orientation topic and measurement concepts, describes dimensions of the measurement concepts, discusses variables framing the measurement concepts, and outlines conceptual grey areas. Conclusion. The framework proposes standard definitions and concepts for the collection of official sexual orientation data in New Zealand. It presents a model for producers of official statistics in other countries, who wish to improve the quality of health data on their citizens. PMID:23840231

Use of Liquefied Biomethane (LBM) as a Vehicle Fuel for Road Freight Transportation : A Case Study Evaluating Environmental Performance of Using LBM for Operation of Tractor Trailers

OpenAIRE

Shanmugam, Kavitha; Tysklind, Mats; Upadhyayula, Venkata K.K.

2018-01-01

The environmental performance of Liquefied Biomethane (LBM) and Diesel operated Tractor Trailer (TT) is compared using the Life Cycle Assessment (LCA) study. In this study we consider, raw biogas produced from an anaerobic digestion process of a Wastewater Treatment Plant (WWTP) in Umea, Sweden, which is then upgraded and liquefied to LBM and used as a fuel for TTs. Currently, the WWTP in Umea is utilizing biogas, produced onsite for cogeneration of heat and electricity, thereby meeting its e...

7 CFR 97.900 - Form of official identification symbol.

Science.gov (United States)

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Form of official identification symbol. 97.900 Section... symbol. The symbol set forth in Figure 1, containing the words “Plant Variety Protection Office” and “U.S. Department of Agriculture,” shall be the official identification symbol of the Plant Variety Protection...

Training Law Enforcement Officials on Responding to Equine Calls

Science.gov (United States)

Anderson, Kathleen P.; Stauffer, Gary; Stauffer, Monte; Anderson, Doug; Biodrowski, Kristie

2016-01-01

The occurrence of equine abuse/neglect cases is an ongoing issue. However, officials responding to equine cases are rarely experienced in handling horses. Therefore, workshops teaching basic horse husbandry were offered to better equip and prepare officials to respond to equine cases. Trainings consisted of both classroom and hands-on sessions.…

Rancang Bangun dan Uji Kinerja Mekanisme Pengendali Otomatis Pedal Rem dan Tuas Transmisi Maju Mundur pada Traktor Roda Empat

Directory of Open Access Journals (Sweden)

I Dewa Made Subrata

2013-01-01

Full Text Available Most of the four wheeled tractors were operated manually for many agricultural applications. Therefore the operator’s fatigue during operating tractor can’t be avoided. To decrease operator’s fatigue it was necessary to operate tractor automatically for forward and backward motion. This research focus on the automatic backward motion and decrease turning radius by modify the brake pedal and forward-backward transmission mechanisms, which were controlled using DC motor with H-bridge actuator. Functional test was done by lifting up the tractor so that it was not move sideways while the tires were rotated. Performance test was done on the field to know the ability of the tractor to move forward and backward automatically and to know the turning radius when the left or right brake pedal was pushed down automatically. Experimental result showed that the time required to push the brake was about 0.47 s for left brake and 0.61 s for right brake. Field test result showed that the tractor was able to control automatically for forward motion with average speed of 0.62 m/s, backward motion with average speed of 0.63 m/s, to turn left with average turning radius of 2.2 m, and turn right with average turning radius of 2.4 m.

7 CFR 56.35 - Authority to use, and approval of official identification.

Science.gov (United States)

2010-01-01

... of labels or packaging materials bearing official identification or denial of the benefits of the Act.... No label, container, or packaging material bearing official identification may be printed or prepared... with this part. Packaging materials bearing official identification marks shall be approved pursuant to...

Influência da altura das garras dos pneus de um trator em área de plantio direto Influence of tractor tire lug height in an área with no tillage

Directory of Open Access Journals (Sweden)

Antonio Gabriel Filho

2010-10-01

Full Text Available Desenvolveu-se este trabalho com o objetivo de se avaliar os parâmetros de desempenho de um trator agrícola equipado com um conjunto de pneus diagonais com garras altas (pneu novo e outro conjunto de pneus diagonais de mesma dimensão, com garras mais baixas, em solo com cobertura vegetal (palha de milho. Utilizaram-se as velocidades teóricas de 4, 5, 6 e 7 km h-1, informadas no painel do trator, uma força de tração constante de 25 kN, e se mediram a força de tração, a velocidade de deslocamento, a patinagem dos rodados, o consumo horário e específico de combustível; enfim, foram calculadas a potência disponível na barra de tração e a razão entre o consumo horário e o consumo específico de combustível com a potência e o coeficiente de tração. Concluiu-se que, em solo com cobertura vegetal palha de milho, esses parâmetros de desempenho do trator foram semelhantes para ambas as alturas de garra dos pneus.This work was carried out to evaluate the performance of a farm tractor fitted with two sets of tires with high lugs and another set of tires with tallow lugs in straw without tillage (corn straw. The travel speeds used were approximately 4, 5, 6 and 7 km h-1 and a constant pulling force of 25 kN was fixed. Tractor traction, forward speed, slip and consumption of fuel were measured and drawbar power, the ratio between the consumption and power and traction coefficient were calculated. It was observed that the tractor performance was similar to high and low lug tire conditions, in an area covered with corn straw.

Immunity ratione materiae of foreign state officials before Rwandan ...

African Journals Online (AJOL)

The article seeks to determine when, as a matter of international law, foreign state officials should be granted immunity ratione materiae when they are sued in civil and criminal proceedings in Rwanda. It also investigates the questions as to whether this immunity can be waived by the state on behalf of which the official ...

Blazing the trail: Official Report : Singapore 2010 Youth Olympic Games

OpenAIRE

2012-01-01

The official report of the 1st Youth Olympic Games, “Blazing the trail: Official Report: Singapore 2010 Youth Olympic Games” consisted of one volume, published in French and English. The French version was published only in electronic form

9 CFR 590.412 - Form of official identification symbol and inspection mark.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Form of official identification symbol... PRODUCTS INSPECTION ACT) Identifying and Marking Product § 590.412 Form of official identification symbol... official identification symbol for purposes of this part and, when used, imitated, or simulated in any...

EPA Nonregulatory Nonroad Duty Cycles

Science.gov (United States)

EPA nonregulatory, nonroad duty cycles for equipment such as agricultural tractors, backhoe loaders,crawlers tractors, excavators, arc welding skid steer loaders, and wheel loaders. Also,test procedures, laboratory methods, and emissions for this equipmen

28 CFR 68.41 - Official notice.

Science.gov (United States)

2010-07-01

... ALIENS, UNFAIR IMMIGRATION-RELATED EMPLOYMENT PRACTICES, AND DOCUMENT FRAUD § 68.41 Official notice... so noticed, and shall be given adequate opportunity to show the contrary. [54 FR 48596, Nov. 24, 1989...

The task of official personal monitoring in Germany using electronic dosimetry systems

International Nuclear Information System (INIS)

Huebner, Stephan; Wahl, Wolfgang; Busch, Frank; Martini, Ekkehard

2008-01-01

Full text: Since the establishment of the first German personal monitoring services as competent measuring bodies in the year 1952, official personal dosimetry is carried out using passive dosimeters such as film batches, RPL- and TL-dosimeters solely. On the other hand, electronic dosimeters are in use in some big institutions like Nuclear Power Plants, hospitals or industrial units for operational purposes. In most cases, these dosimeters are regulated by competent authorities. For more than 20 years electronic dosimeters proved their worth of being appropriate personal dosimeters. Since 2001 concepts to implement electronic personal dosimeters into the official individual monitoring of occupational exposed workers were developed in different research projects. The EU market of personal dosimetry changes to an open and competitive one, the number of outside workers, especially during the outages of Nuclear Power Plants increases, the landscape of customers is getting more and more heterogeneous. Being able to face these tasks of a sustainable personal monitoring requires the introduction of modern electronic dosimeters into to the official monitoring. Doing so, the needed prompt exchange of dose-data between different monitoring services as well as between the customers and the related monitoring service can be warranted. In cooperation with the industry, competent authorities and a research centre a method for official dosimetry using electronic dosimetry systems was developed, realised and tested successfully by the three big monitoring services of Germany. These investigations are supported by the German Federal Ministry for the Environment, Nature Conservation and Nuclear Safety. For this purpose a network between customers and monitoring services was built up in order to monitor people, who work in different places related to different measuring bodies in only one period of surveillance. (author)

Comparison of R5 and G12 Antibody-Based ELISA Used for the Determination of the Gluten Content in Official Food Samples

Directory of Open Access Journals (Sweden)

Rupert Hochegger

2015-11-01

Full Text Available Celiac Disease (CD is one of the most common food intolerances. It comes along with serious damage of the mucosa in the small intestine and is caused by the storage proteins—termed “gluten”—of wheat, rye, barley and possibly oats. Sensitive individuals need to stick to a strict gluten-free diet. The gluten level in food products labeled as “gluten-free”, must not exceed 20 mg/kg. It is obvious that effective test methods are needed to accurately determine the gluten concentration in foods. The determination of the presence of gluten in foodstuffs is mainly done by means of an immunochemical method called ELISA (enzyme-linked immunosorbent assay. To check the suitability of a G12 antibody-based gluten detection kit for its use in official control systems a number of routine samples were tested in parallel with two different test kits, as would be done in a routine lab. The determination of the gluten content was performed on samples entering the official laboratory including samples from official control plans, commercially available and private samples to request gluten-free labels. The results obtained with the G12 antibody ELISA assay were comparable to the official R5 method. A validation of the two different methods was not part of this study.

Toward Global Comparability of Sexual Orientation Data in Official Statistics: A Conceptual Framework of Sexual Orientation for Health Data Collection in New Zealand’s Official Statistics System

Directory of Open Access Journals (Sweden)

Frank Pega

2013-01-01

Full Text Available Objective. Effectively addressing health disparities experienced by sexual minority populations requires high-quality official data on sexual orientation. We developed a conceptual framework of sexual orientation to improve the quality of sexual orientation data in New Zealand’s Official Statistics System. Methods. We reviewed conceptual and methodological literature, culminating in a draft framework. To improve the framework, we held focus groups and key-informant interviews with sexual minority stakeholders and producers and consumers of official statistics. An advisory board of experts provided additional guidance. Results. The framework proposes working definitions of the sexual orientation topic and measurement concepts, describes dimensions of the measurement concepts, discusses variables framing the measurement concepts, and outlines conceptual grey areas. Conclusion. The framework proposes standard definitions and concepts for the collection of official sexual orientation data in New Zealand. It presents a model for producers of official statistics in other countries, who wish to improve the quality of health data on their citizens.

9 CFR 592.310 - Form of official identification symbol and inspection mark.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Form of official identification symbol... Identifying and Marking Products § 592.310 Form of official identification symbol and inspection mark. (a) The shield set forth in Figure 1, containing the letters “USDA,” shall be the official identification symbol...

Twenty-one Ways to Develop Esprit De Corps Among Your Student Officials.

Science.gov (United States)

Kovalakides, Nick

Student officials for intramural sports can be given special training to enhance their aptitude in the field, but their attitude is more difficult to develop. This paper suggests 21 ways to develop attitude among student officials. Some of the suggestions are: Athletic departments should emphasize the role of the official in the intramural…

Distribution of MCA-coated grits in maize fields after high wheel tractor application for disrupting orientation of Diabrotica virgifera virgifera LeConte.

Science.gov (United States)

Wennemann, Ludger; Hummel, Hans E

2002-01-01

High wheel tractor applications of 4-methoxycinnamaldehyde (MCA)-coated corn granules ('grits') were conducted in Ruski Krstur (Serbia) in summer 2001 in a 5 ha corn field. Grits are a by-product after corn is harvested and separated from the cob and used as a carrier medium to disseminate MCA into the corn field. MCA is a kairomone mimic derived form Cucurbita maxima (Duchesne) used to disrupt orientation of Diabrotica virgifera virgifera LeConte towards different MCA and pheromone baited traps. The ultimate goal is to investigate the use of MCA as a mating disruptant. MCA was dissolved in an organic solvent and mixed in a cement machine with the grits. Grits were applied at rates of 17.39, 17.1 and 12.45 kg/ha on July 4th, July 19th and August 3rd. Before the impact of MCA as a disruptant can be addressed, the distribution patterns of MCA coated grits have to be thoroughly investigated. They were evaluated by counting girts deposited in 16 or 20 plastic dishes of 30-cm diameter positioned along 2 rows through the field directly after the grit application by tractor. Additionally, grits deposited on corn plant surface such as leaves, leaf axils and corn cobs were counted. Total number of grits collected in plastic dishes revealed even application rates at the first and second application but not on the third application date. Number of grits collected on plant surfaces were significantly different from each other regarding each application date. Altogether, grit distribution in the dishes as well as on the plant surface was variable. However, distribution patterns achieved so far hold promise to disseminate MCA coated grits into corn fields for orientation disruption or mating disruption of D. virgifera virgifera.

18 CFR 3a.12 - Authority to classify official information.

Science.gov (United States)

2010-04-01

... efficient administration. (b) The authority to classify information or material originally as Top Secret is... classify information or material originally as Secret is exercised only by: (1) Officials who have Top... information or material originally as Confidential is exercised by officials who have Top Secret or Secret...

9 CFR 302.3 - Livestock and products entering official establishments.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Livestock and products entering official establishments. 302.3 Section 302.3 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE... Livestock and products entering official establishments. All livestock and all products entering any...

What Is Technology Education? A Review of the "Official Curriculum"

Science.gov (United States)

Brown, Ryan A.; Brown, Joshua W.

2010-01-01

Technology education, not to be confused with educational technology, has an "official curriculum." This article explores this "official curriculum" and answers the following questions; what are the goals of technology education, what should technology education look like in classrooms, and why technology education is important. This article…

Space Weather Influence on Relative Motion Control using the Touchless Electrostatic Tractor

Science.gov (United States)

Hogan, Erik A.; Schaub, Hanspeter

2016-09-01

With recent interest in the use of electrostatic forces for contactless tugging and attitude control of noncooperative objects for orbital servicing and active debris mitigation, the need for a method of remote charge control arises. In this paper, the use of a directed electron beam for remote charge control is considered in conjunction with the relative motion control. A tug vehicle emits an electron beam onto a deputy object, charging it negatively. At the same time, the tug is charged positively due to beam emission, resulting in an attractive electrostatic force. The relative position feedback control between the tug and the passive debris object is studied subject to the charging being created through an electron beam. Employing the nominal variations of the GEO space weather conditions across longitude slots, two electrostatic tugging strategies are considered. First, the electron beam current is adjusted throughout the orbit in order to maximize this resulting electrostatic force. This open-loop control strategy compensates for changes in the nominally expected local space weather environment in the GEO region to adjust for fluctuations in the local plasma return currents. Second, the performance impact of using a fixed electron beam current on the electrostatic tractor is studied if the same natural space weather variations are assumed. The fixed electron beam current shows a minor performance penalty (<5 %) while providing a much simpler implementation that does not require any knowledge of local space weather conditions.

6 CFR 13.16 - Disqualification of Reviewing Official or ALJ.

Science.gov (United States)

2010-01-01

... 6 Domestic Security 1 2010-01-01 2010-01-01 false Disqualification of Reviewing Official or ALJ. 13.16 Section 13.16 Domestic Security DEPARTMENT OF HOMELAND SECURITY, OFFICE OF THE SECRETARY PROGRAM FRAUD CIVIL REMEDIES § 13.16 Disqualification of Reviewing Official or ALJ. (a) A Reviewing...

10 CFR 1045.33 - Appointment of restricted data management official.

Science.gov (United States)

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Appointment of restricted data management official. 1045... DECLASSIFICATION Generation and Review of Documents Containing Restricted Data and Formerly Restricted Data § 1045.33 Appointment of restricted data management official. (a) Each agency with access to RD or FRD shall...

28 CFR 8.2 - Designation of officials having seizure authority.

Science.gov (United States)

2010-07-01

... 28 Judicial Administration 1 2010-07-01 2010-07-01 false Designation of officials having seizure... CERTAIN STATUTES § 8.2 Designation of officials having seizure authority. The Director, Associate Director... Investigation are authorized to seize such property as may be subject to seizure pursuant to statutes identified...

Radioactivity monitoring by the official monitoring stations in North-Rhine Westphalia and the Juelich Nuclear Research Centre after the Chernobyl reactor accident

International Nuclear Information System (INIS)

1986-01-01

This official report presents a governmental declaration of the prime minister of NRW, Mr. Rau, concerning the reactor accident at Chernobyl, and a joint declaration of ministers of NRW, concerning the impact of the accident on the Land NRW. These statements are completed by six official reports on radioactivity measurements carried out by the official monitoring stations of the Land and by the KFA Juelich. These reports inform about methods, scope, and results of the measuring campaigns accomplished by the Zentralstelle fuer Sicherheitstechnik (ZFS), the public materials testing office (MPA), the Chemisches Untersuchungsamt, the Landesamt fuer Wasser und Abfall, and the KFA Juelich. (DG) [de

Non-official mail

CERN Multimedia

2006-01-01

The Mail Office wishes to remind users of the mail service that the latter is reserved exclusively for the Organization's official mail. Private mail, even if stamped, does not fall into this category, and any mail of this nature found in the 'Outgoing Mail' or 'Départ Courrier' boxes will no longer be collected or accepted by the Meyrin or Prévessin Mail Offices. The Mail Office declines all responsibility in the event of losses, delays or any other problems arising as a result of private mail being placed in these boxes. Thank you for your understanding. The Mail Office

The principle of public access to official documents in Sweden

International Nuclear Information System (INIS)

Persson, I.

2001-01-01

In Sweden, access to information is considered one of the cornerstones of the free democratic exchange of views. It is not enough that public authorities give information about their work. Public activities shall be open to the citizens and the media in such a way that they can choose the information they wish to obtain, without having to rely on public information services. An official document is public, it must be kept available to anyone who wishes to peruse it. Official documents are registered in a public register in order to allow to anyone to exercise their right of access to official document. (N.C.)

Prioridades de requisitos para projeto de postos de operação de tratores quanto à ergonomia e segurança Requirement priorities for the design of tractor workplaces related to ergonomics and safety

Directory of Open Access Journals (Sweden)

Paula Machado dos Santos

2008-07-01

Full Text Available O objetivo deste trabalho foi identificar as prioridades de requisitos de projeto, de postos de operação de tratores agrícolas do mercado nacional brasileiro, conforme as normas de ergonomia e segurança. Compuseram a amostragem os tratores agrícolas de pneus de borracha novos, com bitola externa superior a 1.150 mm, sem quaisquer alterações em suas características originais por parte do fabricante ou revendedor, em comercialização em território nacional, quanto à disposição interna dos comandos de operação, aos assentos e aos acessos dos postos de operação. Como análise comparativa dos requisitos dos clientes destas máquinas e, conseqüentemente, a hierarquização dos requisitos necessários ao projeto de postos de operação, que são atendidos pelos fabricantes de tratores agrícolas, foram utilizadas as ferramentas para o desenvolvimento de projetos diagrama de Mudge e a primeira matriz do "quality function deployment", respectivamente. As marcas de tratores agrícolas nacionais apresentam a mesma prioridade quanto ao atendimento aos requisitos de projeto de ergonomia e segurança em postos de operação. O assento representa a prioridade de maior ordem, seguido dos comandos e, em última posição, os acessos.The objective of this work was to characterize the requirement priorities for workplace design of agricultural tractors of the national market, as per standards of ergonomics and safety. The patterns were composed by agricultural new tractors rubber tires, with minimum gauge of 1,150 mm, without any alterations in their original characteristics on the part of the manufacturer or reselling, in commercialization in national territory, related to the internal disposition of the operation commands, to the seats and to the accesses of the workplaces. As comparative analysis of the customer requirements for of these machines and, consequently, the hierarchization of the necessary requirements for the project of workplaces

44 CFR 8.3 - Senior FEMA official responsible for the information security program.

Science.gov (United States)

2010-10-01

... 44 Emergency Management and Assistance 1 2010-10-01 2010-10-01 false Senior FEMA official... Senior FEMA official responsible for the information security program. The Director of the Security Division, has been designated as the senior official to direct and administer the FEMA information security...

Official Report of the XXVIII Olympiad: Athens 2004

OpenAIRE

Skarvelē, Euharēs

2014-01-01

The “Official Report of the XXVIII Olympiad: Athens 2004” was published by ATHOC in English and Greek. Based on the same model as for Sydney 2000, this official report consisted of a box set of two printed volumes (Homecoming of the Games - organisation and operations; The Games) and a multimedia set, which offered two bilingual CD-ROMs containing the results, and a DVD of the film “Behind the scenes of the Athens 2004 Opening and Closing Ceremonies”. Vol. 1 Part I: Homecoming of the Games ; ...

Tractor perfomance as a function of speed and seeder’s tire inflation pressure Desempenho de trator em função da velocidade e da pressão de inflação dos pneus da semeadora

Directory of Open Access Journals (Sweden)

Carlos Eduardo Angeli Furlani

2010-08-01

Full Text Available The performance of agricultural tractors under field conditions results from the interaction between tire and wheel affected by displacement speed. This work was developed to assess the performance of an agricultural tractor under different seeder's tire inflation pressure (518; 483 and 414kPa and in two different gears providing speeds of 3.0 and 6.0km h-1. The experiment was performed at Jaboticabal Campus of São Paulo State University (UNESP. The experimental design used was entirely randomized in a 2-factor factorial design (3x2 with four replications. The draft force was influenced by the gear as well as by the required power; however, tire inflation pressure in the seeder did not change these parameters. Also, fuel consumption was influenced only by the tractor gear. Energy consumption was greater as speed increased, caused by gear shifting. The displacement speed was greater for the 518kPa pressure due to a lesser slippage in the seeder under this pressure. Tractor slippage did not change.O desempenho de tratores agrícolas em condições de campo resulta da interação entre pneu e rodado, influenciado pela velocidade de deslocamento. O objetivo deste trabalho foi avaliar o desempenho de um trator agrícola sob diferentes pressões de inflação dos pneus da semeadora (518, 483, and 414kPa e em duas marchas que proporcionaram velocidades de 3,0 e 6,0km h-1. O experimento foi realizado no campus de Jaboticabal da Universidade Estadual Paulista (UNESP. O delineamento experimental utilizado foi fatorial inteiramente casualizado (3x2, com quatro repetições. A força de tração foi influenciada pela marcha e pela potência exigida; no entanto, a pressão de inflação do pneu da semeadora não alterou esses parâmetros. Além disso, o consumo de combustível foi influenciado apenas pela marcha do trator. O consumo de energia foi maior com o aumento da velocidade, ocasionada pela mudança de marcha. A velocidade de deslocamento foi maior

A Test Platform for Planned Field Operations Using LEGO Mindstorms NXT

Directory of Open Access Journals (Sweden)

Gareth Edwards

2013-11-01

Full Text Available Testing agricultural operations and management practices associated with different machinery, systems and planning approaches can be both costly and time-consuming. Computer simulations of such systems are used for development and testing; however, to gain the experience of real-world performance, an intermediate step between simulation and full-scale testing should be included. In this paper, a potential common framework using the LEGO Mindstorms NXT micro-tractor platform is described in terms of its hardware and software components. The performance of the platform is demonstrated and tested in terms of its capability of supporting decision making on infield operation planning. The proposed system represents the basic measures for developing a complete test platform for field operations, where route plans, mission plans, multiple-machinery cooperation strategies and machinery coordination can be executed and tested in the laboratory.

Environment conservation by way of official notice or recommendations

International Nuclear Information System (INIS)

Ossenbuehl, F.

1986-01-01

Official notice or recommendations belong to the self-evident instruments of government authorities to fulfill their functions. According to their typical type of effect, in the system of powers to act, these instruments belong to the group of the simple administrative acts of state. They are thus not of direct legal interest, at first sight. However, the Chernobyl accident and its consequences have just been the latest opportunity to realise that official notice or recommendations issued by state authorities may have a far-reaching impact on the consumers' behaviour, and hence on the market situation. The book in hand discusses legal problems in connection with such impact, taking as an example the field of environment conservation and related precautionary activities. The main issues dealt with refer to the permissibility by law and the formal status of official notice warning of the use of environmentally harmful products, to legal protection in case of unlawful warnings or recommendations, and to possible liabilities. The book in hand developed from a legal expertise made on behalf of the German Federation of Toilet Articles and Detergents Producers is intended to show that the increasingly used informal administrative instruments of official notice or recommendations ought to be integrated into the system of administrative law. (orig./HP) [de

Desenvolvimento de equipamento motorizado para aplicação líquida de produtos fitossanitários na cultura do café Development of a walk behind tractor for spraying coffee trees

Directory of Open Access Journals (Sweden)

Tomás K. Matuo

2008-09-01

Full Text Available O trabalho teve como objetivo desenvolver um protótipo aplicador de líquidos na superfície do solo para cafezais localizados em regiões de topografia acidentada ou cultivados em sistema de plantio adensado. O protótipo do aplicador construído é um trator de rabiças acionado por um motor de dois tempos a gasolina, de 2,61 kW (3,5 cv, com duas rodas motrizes com bitola de 0,60 m e uma terceira roda direcional, equipado com sistema de pulverização dotado de depósito de 40 L, bomba centrífuga, filtros de linha, regulador de pressão, manômetro, mangueiras, válvulas e suporte de bicos. Para avaliar a eficiência do protótipo, foram instalados dois experimentos de campo em São Sebastião do Paraíso - MG (2003 e 2004, onde foram aplicados inseticidas sistêmicos para o controle da cigarra. Os métodos de aplicação avaliados foram: aplicação em faixa, filete, "drench" contínuo e "drench" intermitente. O protótipo aplicador de líquidos à superfície do solo atendeu aos objetivos propostos, visto que conseguiu realizar o controle químico de cigarras com destaque para a aplicação em "drench" contínuo. O protótipo, se equipado para aplicar simultaneamente nos dois lados da planta, apresentará capacidade de campo operacional semelhante à do equipamento tratorizado.The present research aimed to develop a motorized sprayer for coffee plantations located in sloping areas or planted in a high density planting system. The equipment developed is a walk behind tractor powered by a 2.61 kW (3.5 cv two-stroke engine, clearance of 0.60 m between two driving wheels, having a third directional wheel, equipped with spray system composed by a 40 L hopper, centrifugal pump, line filters, pressure regulator and gauge, hoses, valves and nozzles. Evaluations of the prototype were made in two field tests in São Sebastião do Paraíso - MG, Brazil (2003 and 2004, applying systemic insecticides to control the coffee cicadas. The application

Could the United States Reinstitute an Official Torture Policy?

Directory of Open Access Journals (Sweden)

Adam Jacobson

2017-06-01

Full Text Available In 2015, the United States passed legislation that reaffirmed its ban on using torture and abusive techniques in national security interrogations. However, the Republican president-elect Donald Trump has repeatedly promised to revive torture as official policy, and the idea of torturing suspected terrorists is popular with the American public. Given these facts, what are the vulnerabilities within the current prohibition that makes a return to an official torture policy possible? This paper examines the weaknesses within each branch of government and other factors that could contribute to making a return to official torture by the United States more likely. It shows that the prohibition against torture does face vulnerabilities that can be exploited to reinstitute a torture policy, and that while this may not be likely in the current political environment, it is possible.

Biodiesel of palm oil in tractor agricultural: opacity of smoke in the light of storage time; Biodiesel de dende em trator agricola: opacidade da fumaca em funcao do tempo de armazenamento

Energy Technology Data Exchange (ETDEWEB)

Lima, Leomar P. [Instituto Federal do Triangulo Mineiro (IFTM), Uberlandia, MG (Brazil)], email: leomaragro@yahoo.com.br; Lopes, Afonso; Oliveira, Melina C.J. [Universidade Estadual Paulista Julio de Mesquita Filho (FCAV/UNESP), Jaboticabal, SP (Brazil). Fac. de Ciencias Agrarias e Veterinarias. Dept. de Engenharia Rural; Camara, Felipe T. [Universidade Federal do Ceara (UFC), Cariri, CE (Brazil)

2011-07-01

The scenario of atmospheric emissions world characterized-if, in recent years, due to a series of technical factors, economic and political, by the need to reduce the consumption of petroleum. The objective of this work was to evaluate the opacity of smoke of a motor of a tractor agricultural operating with biodiesel of palm oil with different periods of storage. The experiment was conducted in the Laboratory of machinery and agricultural mechanization of Rural Engineering Department of UNESP, Jaboticabal, SP. In this study,-if a tractor Valtra BM 110 4x2 TDA 73,6 kW (100 cv) in engine 2.350 rpm. The experimental design was completely randomized, in factorial scheme 5x3, with 3 repetitions. The combinations of factors were five proportions of mixing biodiesel for diesel (B0, B5, B25, B 50 and B100, that the number indicates the percentage of biodiesel for diesel) and three storage times in condition environment (0, 3 and 6 months). The results showed that in relation to B0, when used biodiesel in the proportion of B100, the opacity of smoke reduced in 50.4% and the time of storage of biodiesel not committed the opacity of smoke from combustion of the engine. (author)

The Use of Social Media for Communication In Official Statistics at European Level

Directory of Open Access Journals (Sweden)

Ionela-Roxana GLĂVAN

2016-12-01

Full Text Available Social media tools are wide spread in web communication and are gaining popularity in the communication process between public institutions and citizens. This study conducts an analysis on how social media is used by Official Statistical Institutes to interact with citizens and disseminate information. A linear regression technique is performed to examine which social media platforms (Twitter or Facebook is a more effective tool in the communication process in the official statistics area. Our study suggests that Twitter is a more powerful tool than Facebook in enhancing the relationship between official statistics and citizens, complying with several other studies. Next, we performed an analysis on Twitter network characteristics discussing “official statistics” using NodeXL that revealed the unexploited potential of this network by official statistical agencies.

75 FR 53841 - Display of Official Sign; Permanent Increase in Standard Maximum Share Insurance Amount

Science.gov (United States)

2010-09-02

... to replace the old version of the official sign with the revised official sign at required locations.... Additionally, a credit union must replace the old version of the official sign with the revised official sign... internet signs and deplete its stockpiles of other printed advertising materials. NCUA also believes that...

Official Time Usage in the Federal Government Fiscal Year 2005 Survey Responses

Data.gov (United States)

Office of Personnel Management — Section 7131 of title 5, United States Code, defines and authorizes official time for unions representing Federal employees. Official time, broadly defined, is paid...

Using value stream mapping technique through the lean production transformation process: An implementation in a large-scaled tractor company

Directory of Open Access Journals (Sweden)

Mehmet Rıza Adalı

2017-04-01

Full Text Available Today’s world, manufacturing industries have to continue their development and continuity in more competitive environment via decreasing their costs. As a first step in the lean production process transformation is to analyze the value added activities and non-value adding activities. This study aims at applying the concepts of Value Stream Mapping (VSM in a large-scaled tractor company in Sakarya. Waste and process time are identified by mapping the current state in the production line of platform. The future state was suggested with improvements for elimination of waste and reduction of lead time, which went from 13,08 to 4,35 days. Analysis are made using current and future states to support the suggested improvements and cycle time of the production line of platform is improved 8%. Results showed that VSM is a good alternative in the decision-making for change in production process.

20 CFR 405.360 - Official record.

Science.gov (United States)

2010-04-01

... in making the decision under review and any additional evidence or written statements that the... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Official record. 405.360 Section 405.360 Employees' Benefits SOCIAL SECURITY ADMINISTRATION ADMINISTRATIVE REVIEW PROCESS FOR ADJUDICATING INITIAL...

9 CFR 355.8 - Official number.

Science.gov (United States)

2010-01-01

... CERTIFICATION CERTIFIED PRODUCTS FOR DOGS, CATS, AND OTHER CARNIVORA; INSPECTION, CERTIFICATION, AND... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Official number. 355.8 Section 355.8 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY...

Does Sport Event Involvement Influence Brand Recognition of Official Sponsors and Ambush Marketers?

Directory of Open Access Journals (Sweden)

Piątkowska Monika

2016-12-01

Full Text Available The main aim of the study is to verify how event involvement in the UEFA Euro 2012 influenced the recognition of both sponsors’ and ambushers’ brands. Computer-Assisted Personal Interviews were conducted on a representative sample of the Polish society (N = 1,000. On the basis of five groups of consumers regarding involvement in the event, authors examined brand recognition, using Top of Mind Awareness (TOMA tests of official sponsors and ambushers.

The School Business Official: Ten Habits You'll Need To Succeed.

Science.gov (United States)

Giambrone, William, Jr.

2001-01-01

Describes 10 habits school business officials need to succeed: organization, time management, delegation, planning, collaboration, personal development, creativity, empathy, ethos, and leadership. Based on book "The School Business Official: Ten Habits You'll Need To Succeed," published by the Pennsylvania Association of School Business…

7 CFR 1940.316 - Responsible officials for the environmental review process.

Science.gov (United States)

2010-01-01

... submitted to the approval official for final determinations. The SEC will review the assessment and provide... adequacy of the assessment or the recommendations reached, the State Director, whether or not the approving... Law 103-354 official responsible for executing the environmental impact determination and...

Vibration energy absorption in the whole-body system of a tractor operator.

Science.gov (United States)

Szczepaniak, Jan; Tanaś, Wojciech; Kromulski, Jacek

2014-01-01

Many people are exposed to whole-body vibration (WBV) in their occupational lives, especially drivers of vehicles such as tractor and trucks. The main categories of effects from WBV are perception degraded comfort interference with activities-impaired health and occurrence of motion sickness. Absorbed power is defined as the power dissipated in a mechanical system as a result of an applied force. The vibration-induced injuries or disorders in a substructure of the human system are primarily associated with the vibration power absorption distributed in that substructure. The vibration power absorbed by the exposed body is a measure that combines both the vibration hazard and the biodynamic response of the body. The article presents measurement method for determining vibration power dissipated in the human whole body system called Vibration Energy Absorption (VEA). The vibration power is calculated from the real part of the force-velocity cross-spectrum. The absorbed power in the frequency domain can be obtained from the cross-spectrum of the force and velocity. In the context of the vibration energy transferred to a seated human body, the real component reflects the energy dissipated in the biological structure per unit of time, whereas the imaginary component reflects the energy stored/released by the system. The seated human is modeled as a series/parallel 4-DOF dynamic models. After introduction of the excitation, the response in particular segments of the model can be analyzed. As an example, the vibration power dissipated in an operator has been determined as a function of the agricultural combination operating speed 1.39 - 4.16 ms(-1).

9 CFR 121.9 - Responsible official.

Science.gov (United States)

2010-01-01

...) The responsible official must report the identification and final disposition of any select agent or toxin contained in a specimen presented for diagnosis or verification. (1) The identification of any of... virus, foot-and-mouth disease virus, Hendra virus, virulent Newcastle disease virus, Nipah virus, Rift...

16 CFR 5.59 - Presiding official.

Science.gov (United States)

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Presiding official. 5.59 Section 5.59 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE STANDARDS OF... Chief Administrative Law Judge, who shall appoint an Administrative Law Judge to preside over the...

15 CFR 700.6 - Official actions.

Science.gov (United States)

2010-01-01

... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Official actions. 700.6 Section 700.6 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE NATIONAL SECURITY INDUSTRIAL BASE REGULATIONS DEFENSE...

22 CFR 208.885 - May the debarring official extend a debarment?

Science.gov (United States)

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false May the debarring official extend a debarment? 208.885 Section 208.885 Foreign Relations AGENCY FOR INTERNATIONAL DEVELOPMENT GOVERNMENTWIDE... determines that an extension is necessary to protect the public interest. (b) However, the debarring official...

The Observation of Bahasa Indonesia Official Computer Terms Implementation in Scientific Publication

Science.gov (United States)

Gunawan, D.; Amalia, A.; Lydia, M. S.; Muthaqin, M. I.

2018-03-01

The government of the Republic of Indonesia had issued a regulation to substitute computer terms in foreign language that have been used earlier into official computer terms in Bahasa Indonesia. This regulation was stipulated in Presidential Decree No. 2 of 2001 concerning the introduction of official computer terms in Bahasa Indonesia (known as Senarai Padanan Istilah/SPI). After sixteen years, people of Indonesia, particularly for academics, should have implemented the official computer terms in their official publications. This observation is conducted to discover the implementation of official computer terms usage in scientific publications which are written in Bahasa Indonesia. The data source used in this observation are the publications by the academics, particularly in computer science field. The method used in the observation is divided into four stages. The first stage is metadata harvesting by using Open Archive Initiative - Protocol for Metadata Harvesting (OAI-PMH). Second, converting the harvested document (in pdf format) to plain text. The third stage is text-preprocessing as the preparation of string matching. Then the final stage is searching the official computer terms based on 629 SPI terms by using Boyer-Moore algorithm. We observed that there are 240,781 foreign computer terms in 1,156 scientific publications from six universities. This result shows that the foreign computer terms are still widely used by the academics.

Civil Liability for Nuclear Damage. Official Records

International Nuclear Information System (INIS)

1964-01-01

These Official Records of the Conference contain the summary records of the plenary meetings and of the meetings of the Committee of the Whole, the text of the Convention, the Optional Protocol, the Final Act, the resolutions adopted by the Conference and the reports of the committees and sub-committees, as well as all other documents which were submitted to the plenary and the Committee of the Whole. These Official Records also contain a complete index of documents relevant to each Article of the Convention according to its number in the final text. The history of the preparatory studies and documents is summarized on pages 39, 40 and 65-86. The symbols of International Atomic Energy Agency documents are composed of capital letters combined with figures. Mention of such a symbol indicates a reference to an International Atomic Energy Agency document. The summary records of the plenary meetings and of the meetings of the Committee of the Whole contained in this volume were originally circulated in mimeographed form as documents CN-12/OR/1 to 7 and CN-12, CW/OR. 1 to 24 respectively. As printed in this volume they include the corrections to the provisional summary records that were requested by the delegations and such drafting and editorial changes as were considered necessary. These official records are available in English, French, Russian and Spanish. (author)

Sustainable procurement of official cars for the Dutch government

International Nuclear Information System (INIS)

Notenboom, M.

2009-04-01

The objectives of this study are to develop more strict sustainability criteria for procurement policy for official cars for the Dutch government, to examine the effects of alternative scenarios and to provide recommendations that can be used by the Netherlands Society for Nature and Environment to stimulate the government in using more ambitious criteria in their latest tender for official cars. These recommendations involve both the government?s choice of vehicles and the government?s use of these vehicles. [nl

National Statistical Commission and Indian Official Statistics*

Indian Academy of Sciences (India)

IAS Admin

a good collection of official statistics of that time. With more .... statistical agencies and institutions to provide details of statistical activities .... ing several training programmes. .... ful completion of Indian Statistical Service examinations, the.

Soybean biodiesel consumption in agricultural tractor submitted the two forces in the traction bar; Consumo de biodiesel de soja em trator agricola submetido a duas forcas na barra de tracao

Energy Technology Data Exchange (ETDEWEB)

Camara, Felipe T. da [Universidade Federal do Ceara (UFC), Juazeiro do Norte, CE (Brazil)], E-mail: felipe.camara@cariri.ufc.br; Lopes, Afonso; Silva, Rouverson P. da; Oliveira, Melina C.J. de; Torres, Luma S. [Universidade Estadual Paulista (FCAV/UNESP), SP (Brazil). Fac. de Ciencias Agrarias e Veterinarias. Dept. de Engenharia Rural

2009-07-01

Due to the great development occurred in the world after the Second World War and the establishment of patterns of increasingly intense, the energy demand amounted to the point, putting at risk the non-renewable energy sources such as oil, coal minerals, among others, with growing interest in renewable energies, among which the biodiesel has been detached. In this sense, the present work had for objective to evaluate the fuel consumption of a tractor Valtra BM100 4x2 TDA, running with ethyl biodiesel from soybean filtered in seven mixture proportions mixed with the diesel, subject to two forces in the traction bar. The work was conducted in the Department of Rural Engineering of the Paulista State University (UNESP), Jaboticabal Campus, in an entirely randomized designed, in a factorial diagram 2 x 7, with three repetitions. The treatments were a combination for two forces in the traction bar (10 and 22 kN) and seven mixture proportions (B{sub 0}, B{sub 5}, B{sub 1}5, B{sub 2}5, B{sub 5}0, B{sub 7}5 e B{sub 1}00). The results showed that the addition of up to 25% biodiesel to diesel has not changed the fuel consumption, and the greatest force resulted in greater consumption volume and weight, and lower specific consumption, by better use of the power of the tractor. (author)

31 CFR 515.337 - Prohibited officials of the Government of Cuba.

Science.gov (United States)

2010-07-01

... Government of Cuba. 515.337 Section 515.337 Money and Finance: Treasury Regulations Relating to Money and... REGULATIONS General Definitions § 515.337 Prohibited officials of the Government of Cuba. For purposes of this part, the term prohibited officials of the Government of Cuba means Ministers and Vice-ministers...

Official Bilingualism and Field Narratives: Does School Practice Echo Policy Discourse?

Science.gov (United States)

Nana, Genevoix

2013-01-01

This research builds on several layers of meaning representing views from education officials, head teachers, teachers and pupils to investigate the discourse and implementation of official bilingualism policy in primary schools in Cameroon. While at the macro-level, the celebration of the "National Bilingualism Day" in schools has…

42 CFR 73.9 - Responsible Official.

Science.gov (United States)

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Responsible Official. 73.9 Section 73.9 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES QUARANTINE, INSPECTION, LICENSING... Attorney General, (2) Be familiar with the requirements of this part, (3) Have authority and responsibility...

16 CFR 1502.33 - Official notice.

Science.gov (United States)

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Official notice. 1502.33 Section 1502.33 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FEDERAL HAZARDOUS SUBSTANCES ACT REGULATIONS... notice may be taken of such matters as might be judicially noticed by the courts of the United States or...

Automation of Publications in Official Statistics using R

Directory of Open Access Journals (Sweden)

Guido Schulz

2018-03-01

Full Text Available A key task of official statistical authorities is to collect and disseminate indicators periodically. Automation using a wide range of R packages bears massive potential to cut down the resources necessary for the creation of publications. Furthermore, automation in R has the potential to improve transparency, punctuality and coherence of statistical products. The dynamic reporting engine knitr in particular allows for an efficient combination of R’s functionalities of data retrieval, data manipulation and customizable plotting on the one hand, and the layout and typesetting flexibility of LaTex or other markup languages on the other. This allows official statistical authorities to produce either ready-to-print PDFs or interactive websites while adhering to their corporate design requirements. Furthermore, dynamic reporting makes it possible to update periodic publications automatically. A work in progress example of automated statistical country profiles – a product the German Federal Statistical Office regularly publishes based on a wide range of official international sources – will be presented to illustrate both advantages and challenges in the practical use of dynamic reporting using R and knitr in particular.

29 CFR 1928.53 - Protective enclosures for wheel-type agricultural tractors-test procedures and performance...

Science.gov (United States)

2010-07-01

... accomplished by using a 4,410-lb (2,000-kg) weight acting as a pendulum. The impact face of the weight shall be... the test; and (G) When any cables, props, or blocking shift or break during the test, the test shall... structure may be used to complete the test procedure; and (C) Impact at side. The blocking and restraining...

An on-road shock and vibration response test series utilizing worst case and statistical analysis techniques

International Nuclear Information System (INIS)

Cap, J.S.

1997-01-01

Defining the maximum expected shock and vibration responses for an on-road truck transportation environment is strongly dependent on the amount of response data that can be obtained. One common test scheme consists of measuring response data over a relatively short prescribed road course and then reviewing that data to obtain the maximum response levels. The more mathematically rigorous alternative is to collect an unbiased ensemble of response data during a long road trip. This paper compares data gathered both ways during a recent on-road certification test for a tractor trailer van being designed by Sandia

9 CFR 316.8 - Unmarked inspected products; moved between official establishments; moved in commerce.

Science.gov (United States)

2010-01-01

... between official establishments; moved in commerce. 316.8 Section 316.8 Animals and Animal Products FOOD... establishment to another official establishment, for further processing, in a railroad car, truck, or other closed container, if the railroad car, truck, or container is sealed with an official seal of the...

Problems of the current law concerning official plan approval

International Nuclear Information System (INIS)

Bluemel, W.

1986-01-01

The booklet presents lectures held in October 1985 at the Speyer University for Administration Science, on the subject of the law concerning official plan approval. The lectures have been selected for their common interest in the requirements of nature conservation and landscape protection. These requirements and the current practice of plan approval procedure are the main issue of the lectures which discuss aspects of environmental impact statements, consideration of ecological requirements, and the role of the landscape conservation plan accompanying official project planning documents. (HSCH) [de

On the Modeling of a MEMS Based Capacitive Accelerometer for Measurement of Tractor Seat Vibration

Directory of Open Access Journals (Sweden)

M. Alidoost

2010-04-01

Full Text Available Drivers of heavy vehicles often face with higher amplitudes of frequencies range between 1-80 Hz. Hence, this range of frequency results in temporary or even sometimes permanent damages to the health of drivers. Examples for these problems are damages to the vertebral column and early tiredness, which both reduce the driver’s performance significantly. One solution to this problem is to decrease the imposed vibration to the driver’s seat by developing an active seat system. These systems require an online measuring unit to sense vibrations transferred to the seat. The measuring unit can include a capacitive micro-accelerometer on the basis of MEMS which measure online vibrations on the seat. In this study, the mechanical behavior of a capacitive micro-accelerometer for the vibration range applied to a tractor seat has been simulated. The accelerometer is capable to measure step, impact and harmonic external excitations applied to the system. The results of the study indicate that, with increasing the applied voltage, the system sensitivity also increases, but the measuring range of vibrations decreases and vice versa. The modeled accelerometer, at damping ratio of 0.67 is capable to measure accelerations within the frequency range of lower than 130 Hz.

31 CFR 315.1 - Official agencies.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false Official agencies. 315.1 Section 315.1 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) FISCAL SERVICE.... Federal Reserve Bank of Kansas City, 925 Grand Avenue, Kansas City, MO 64198 Dallas, San Francisco, Kansas...

31 CFR 353.1 - Official agencies.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false Official agencies. 353.1 Section 353.1 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) FISCAL SERVICE.... Federal Reserve Bank of Kansas City, 925 Grand Avenue, Kansas City, MO 64198 Dallas, San Francisco, Kansas...

31 CFR 360.1 - Official agencies.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false Official agencies. 360.1 Section 360.1 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) FISCAL SERVICE... Bank of Kansas City, 925 Grand Boulevard, Kansas City, MO 64106 Dallas, San Francisco, Kansas City, St...

Analysis of twitter users' sharing of official new york storm response messages.

Science.gov (United States)

Genes, Nicholas; Chary, Michael; Chason, Kevin

2014-01-01

Twitter is a social network where users read, send, and share snippets of text ("tweets"). Tweets can be disseminated through multiple means; on desktop computers, laptops, and mobile devices, over ethernet, Wi-Fi or cellular networks. This redundancy positions Twitter as a useful tool for disseminating information to the public during emergencies or disasters. Previous research on dissemination of information using Twitter has mostly investigated the characteristics of tweets that are most effective in raising consumer awareness about a new product or event. In particular, they describe characteristics that increase the chance the messages will be shared ("retweeted") by users. In comparison, little has been published on how information from municipal or state government agencies spreads on Twitter during emergency situations. Retweeting these messages is a way to enhance public awareness of potentially important instructions from public officials in a disaster. The aim of this study is to (1) describe the tweets of select New York State and New York City agencies by public officials surrounding two notable recent winter storms that required a large-scale emergency response, and (2) identify the characteristics of the tweets of public officials that were most disseminated (retweeted). For one week surrounding Superstorm Sandy (October 2012) and the winter blizzard Nemo (February 2013), we collected (1) tweets from the official accounts for six New York governmental agencies, and (2) all tweets containing the hashtags #sandy (or #nemo) and #nyc. From these data we calculated how many times a tweet was retweeted, controlling for differences in baseline activity in each account. We observed how many hashtags and links each tweet contained. We also calculated the lexical diversity of each tweet, a measure of the range of vocabulary used. During the Sandy storm, 3242 shared (retweeted) messages from public officials were collected. The lexical diversity of official

From tectonics to tractors: New insight into Earth's changing surface

Science.gov (United States)

Larsen, I. J.

2017-12-01

Weathering and erosion of rock and the transport of sediment continually modify Earth's surface. The transformation and transfer of material by both natural and anthropogenic processes drives global cycles and influences the habitability of our planet. By quantitatively linking erosional and depositional landforms to the processes that form them, we better understand how Earth's surface will evolve in the future, and gain the ability to look into the past to recognize how planetary surfaces evolved when environments were drastically different than today. Many of the recent advances in our understanding of the processes that influence landscape evolution have been driven by the development and application of tools such as cosmogenic nuclides, computational models, and digital topographic data. Here I present results gleaned from applying these tools to a diverse set of landscapes, where erosion is driven by factors ranging from tectonics to tractors, to provide insight into the mechanics, chemistry, and history of Earth's changing surface. I will first examine the landslide response of hillslopes in the Himalaya to spatial gradients in tectonic forcing to assess the paradigm of threshold hillslopes. Second, I will present soil production and chemical weathering rates measured in the Southern Alps of New Zealand to determine the relationship between physical erosion and chemical weathering in one of Earth's most rapidly uplifting landscapes, and discuss the implications for proposed links between mountain uplift and global climate. Third, I will discuss results from numerical flood simulations used to explore the interplay between outburst flood hydraulics and canyon incision in the Channeled Scablands of eastern Washington, and explore the implications for reconstructing discharge in flood-carved canyons on Earth and Mars. Finally, I will present new work that couples high resolution spectral and topographic data to estimate the spatial extent of agriculturally

Role definition among public officials and emergency workers in a nuclear evacuation

International Nuclear Information System (INIS)

Metz, W.C.

1983-01-01

How public officials and emergency workers will resolve conflict between their official duties and assigned tasks and their family and conscience responsibilities is discussed in the context of the Indian Point nuclear station, and the Shoreham nuclear station

Study and full-scale test of a high-velocity grade-crossing simulated accident of a locomotive and a nuclear-spent-fuel shipping cask

International Nuclear Information System (INIS)

Huerta, M.; Yoshimura, H.R.

1983-02-01

This report described structural analyses of a high-speed impact between a locomotive and a tractor-trailer system carrying a nuclear-spent-fuel shipping cask. The analyses included both mathematical and physical scale-modeling of the system. The report then describes the full-scale test conducted as part of the program. The system response is described in detail, and a comparison is made between the analyses and the actual hardware response as observed in the full-scale test. 34 figures

LEP Celebration : the official programme

CERN Multimedia

CERN. Geneva

2000-10-09

At 14:00: Groupe de Jazz "Wolfgang & The Werewolves" . The official programme begins at 15:00 with an introduction from the Director General, and Professor Martinus Veltman will give the keynote speech. Heads of national delegations represented at ministerial level will then make their speeches, following which a commemorative plaque will be unveiled. A specially commissioned ballet by Maurice Béjart will bring the ceremony to a close.

Practice Tests for the TOEFL iBT

CERN Document Server

Stirling, Bruce

2012-01-01

Practice Tests for the TOEFL iBT contains four TOEFL tests, with answer keys. Perfect for self-study and classrooms. Each TOEFL iBT Practice Test...* reflects the design of the official TOEFL internet-based test* tests academic English-language proficiency expected of university students in the United States, Canada, Australia, New Zealand, Ireland, Scotland and England* provides extra practice before you take the official TOEFL iBT* will help you identify those areas of academic English you need to improve for a higher TOEFL iBT score* will give you an unofficial, TOEFL iBT range score within

Uji Unjuk Kerja Traktor Yanmar Tipe TF 85 pada Lahan Basah dan Lahan Kering di Desa Dolok Hataran, Kabupaten Simalungun

OpenAIRE

Tobing, Toman Harry Duga L.

2010-01-01

TOMAN H D L. TOBING: Performance of Yanmar TF 85 Tractor on Wet land and Dry land at Desa Dolok Hataran Kabupaten Simalungun. Under the supervision of TAUFIK RIZALDI and AINUN ROHANAH. The performance test of tractor is its ability to prepare land using implements to know the work capacity, efficiency, work velocity, and wheel skid. The objective of this research is to know the capacity of Yanmar TF 85 tractor on wet land and dry land at Desa Dolok Hataran Kabupaten Simalungun. This rese...

Official portrait of astronaut Ronald J. Grabe

Science.gov (United States)

1989-01-01

Official portrait of Ronald J. Grabe, United States Air Force (USAF) Colonel, member of Astronaut Class 9 (1980), and space shuttle pilot. Grabe wears launch and entry suit (LES) with helmet displayed on table at his left.

Using The Official Lamaze Guide in Childbirth Education Classes

Science.gov (United States)

Hotelling, Barbara A.

2006-01-01

Normal birth has long been promoted by Lamaze International in its mission and vision statements and by the Lamaze Institute for Normal Birth. The Official Lamaze Guide: Giving Birth with Confidence, a book by Judith Lothian and Charlotte DeVries, can be used by birth educators to alter the focus from learning what to expect when one fears the worst to empowering women to understand that birth is usually a healthy, normal process. In this column, the author suggests ways in which childbirth educators can use The Official Lamaze Guide in their classes. PMID:17541460

Virginia Power and Department of Energy spent fuel transportation experience

International Nuclear Information System (INIS)

Ruska, M.D.; Schoonen, D.H.

1986-12-01

Spent fuel assemblies for the Spent Fuel Storage Cask Testing Program conducted by EG and G Idaho, Inc., at the Idaho National Engineering Laboratory (INEL) were transported to the INEL. A total of 69 spent fuel assemblies (23 shipments) were shipped from Virginia Power's nuclear power plant at Surry, Virginia, to the INEL between July 1985 and June 1986 to fill and test three spent fuel storage casks. The shipments were made over the highway system in Transnuclear, Inc., TN-8L shipping casks on specially constructed trailers. The shipments were moved by diesel tractors owned and operated by Tri-State Motor Transit Company of Joplin, Missouri. The gross vehicle weight for each shipment was 112,000 lb, which was a major consideration when selecting routes for the shipments. Cooperative negotiations with officials for the 17 states involved obtained authorization to transport through their states. The shipping campaign was successfully completed through close communication and cooperation and careful planning and operation by all organizations involved

What is the value of official statistics and how do we communicate that value?

Directory of Open Access Journals (Sweden)

Tudorel ANDREI

2014-09-01

Full Text Available Einstein’s aphorism mentioned above wasn’t meant to colour the text, but we particularly believe it corresponds, in a way, to the topic we plan to introduce during the seminar. Consequently, paraphrasing it, the aphorism suggests a derived one which could read: “Not any statistics is official statistics and not any official statement that contains a numerical expression is statistics”. As to the above statements, the following question normally arises: “if not any statistics is official statistics, than what does official statistics mean and where does this brand, that represents a special value of statistics, come from?” On the other hand, if not any official statement, that contains a numerical expression on a certain economic or social phenomenon, is statistics, then what kind of meaning does it have?

Beyond the technical: The role of emotion regulation in lacrosse officiating.

Science.gov (United States)

Friesen, Andrew P; Devonport, Tracey J; Lane, Andrew M

2017-03-01

Emotions can influence the performance of referees leading to a need to examine emotions experienced, and regulation strategies used by referees. The present study assessed emotions and emotion regulation strategies of 19 referees officiating at an Under-19 Lacrosse World Championship. Using survey methods and focus group interviews, officials responded to five questions: (a) What emotions were experienced? (b) What events elicited emotions? (c) How did lacrosse officials manage their own emotional states prior to, throughout, and following a competitive game? (d) How did officials manage others' emotional states? (e) What were the perceived consequences of these strategies? Results indicate that emotions fluctuated throughout the tournament as referees encountered intrapersonal and interpersonal emotion-eliciting events. These fluctuations are suggested to come from a progressively diminished capacity for emotion regulation. Participants used emotion regulation strategies that could be classified into Gross' (1999) families of emotion regulation strategies, often relying on suppression, emotion contagion, and preventative refereeing. Collectively, the results offer new insights into referee emotion regulation at international events.

Official Naming in Hå, Klepp and Time

Directory of Open Access Journals (Sweden)

Inge Særheim

2012-08-01

Full Text Available Toponyms localize, reflect and give information about historical traditions and various phenomena in an area. They form part of the local heritage and culture. The relationship between place names, heritage and identity is often underlined in guidelines regarding official naming of streets and roads. In what way is heritage and local identity reflected in the road names of the three municipalities Hå, Klepp and Time (Southwest-Norway, and how is the special character of this area expressed in the names? More than half of the official road names in the three municipalities are either identical with a local toponym, or they consist of a word for ‘road’ and a local toponym (or an appellative describing the location. This shows that there is a strong commitment to base the official naming on local tradition and thus contribute to identity. Quite a few elements from the dialect, e.g. special pronunciation, grammatical forms or local words, appear in the names, especially in the road names from Hå, reflecting that the names are part of the local culture, and due to the fact that the dialect is unique. Consistency is a challenge, however; the same word is sometimes spelled in different ways in different names. It appears that, with some exceptions, cultural heritage and local tradition have been preferred principles and guidelines with regard to naming of roads in the three municipalities, due to a consciousness that heritage and tradition create identity.

Official Union Time Tracking System Operational Data Store

Data.gov (United States)

Social Security Administration — Official Union Time Tracking System captures the reporting and accounting of the representational activity for all American Federation of Government Employees (AFGE)...

The Use of Official Statistics in Self-Selection Bias Modeling

Directory of Open Access Journals (Sweden)

Dalla Valle Luciana

2016-12-01

Full Text Available Official statistics are a fundamental source of publicly available information that periodically provides a great amount of data on all major areas of citizens’ lives, such as economics, social development, education, and the environment. However, these extraordinary sources of information are often neglected, especially by business and industrial statisticians. In particular, data collected from small businesses, like small and medium-sized enterprizes (SMEs, are rarely integrated with official statistics data.

9 CFR 590.35 - Eggs and egg products outside official plants.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Eggs and egg products outside official plants. 590.35 Section 590.35 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT... official plant and are in violation of this part or any of said Federal Acts or any State or local law...

CORRELATION BETWEEN RESPECT, RESPONSIBILITY, INTERPERSONAL RELATIONSHIP, SUPERVISION, AND COMPENSATION TO THE PERFORMANCE OF OFFICIAL RECORDER AT STATE HOSPITALS BUKITTINGGI WEST-SUMATRA INDONESIA

Directory of Open Access Journals (Sweden)

Syukra Alhamda

2013-01-01

Full Text Available Objective: Primary survey was conducted on November 10, 2012 at The State Hospitals Bukittinggi, with randomly selected of 100 hospital medical records. There were incomplete contents of 61.66% and 48.33% of late files. This issue is very disturbing process for management of recording medical data, therefore, disrupting functions of medical recorders.Method: This study applied cross-sectionalstudy to determine the correlation between respect, responsibility, interpersonal relations, supervisionand compensation for the performance of official recorders at The State Hospitals Bukittinggi West-Sumatra Indonesia. Questionnaires from the subjects were proceed and computed by applying chisquare test.Results: The results showed that there were significant correlation between the performance of official award recorders (p = 0.003 and OR = 9.208, responsibilities (p = 0.012 and OR = 6.094, interpersonal (p = 0.0025 and OR = 5.417, performance of official (p = 0.012 and OR = 6.094, and compensation of official recorders (p = 0.025 and OR = 5.417 to recorders performance. Conclusion: In this research, we observed that there was a significant correlation between respect, responsibility, interpersonal relations, supervision and compensation to the performance of official recorders. A greater

Vibration energy absorption in the whole-body system of a tractor operator

Directory of Open Access Journals (Sweden)

Jan Szczepaniak

2014-06-01

Full Text Available Many people are exposed to whole-body vibration (WBV in their occupational lives, especially drivers of vehicles such as tractor and trucks. The main categories of effects from WBV are perception degraded comfort interference with activities-impaired health and occurrence of motion sickness. Absorbed power is defined as the power dissipated in a mechanical system as a result of an applied force. The vibration-induced injuries or disorders in a substructure of the human system are primarily associated with the vibration power absorption distributed in that substructure. The vibration power absorbed by the exposed body is a measure that combines both the vibration hazard and the biodynamic response of the body. The article presents measurement method for determining vibration power dissipated in the human whole body system called Vibration Energy Absorption (VEA. The vibration power is calculated from the real part of the force-velocity cross-spectrum. The absorbed power in the frequency domain can be obtained from the cross-spectrum of the force and velocity. In the context of the vibration energy transferred to a seated human body, the real component reflects the energy dissipated in the biological structure per unit of time, whereas the imaginary component reflects the energy stored/released by the system. The seated human is modeled as a series/parallel 4-DOF dynamic models. After introduction of the excitation, the response in particular segments of the model can be analyzed. As an example, the vibration power dissipated in an operator has been determined as a function of the agricultural combination operating speed 1.39 – 4.16 ms[sup] -1 [/sup].

Feature article: adoption of an official ISEA glossary

Energy Technology Data Exchange (ETDEWEB)

Zartarian, Valerie; Bahadori, Tina; McKone, Thomas

2004-09-15

The International Society for Exposure Analysis (ISEA) and its Nomenclature Committee have been involved since the mid-1990s in an intermittent but ongoing effort to develop an official ISEA glossary. Several related activities have stimulated greater interest and discussion nationally and internationally on a common exposure language. Among these activities are a 1997 Journal of Exposure Analysis and Environmental Epidemiology feature article on exposure and dose definitions and a 1999-initiated project of the International Programme on Chemical Safety (IPCS) (WHO/ILO/UNEP) to confront terminology issues hindering harmonization in the area of exposure assessment. Recently the ISEA members voted in support of adopting the IPCS glossary as the official ISEA glossary, and the ISEA Executive Board agreed to accept this recommendation. In this feature article we (1) describe the process through which the ISEA adopted the IPCS glossary as the official ISEA glossary, (2) present the joint IPC S/ISEA glossary of terms and their definitions, and (3) discuss plans for how the glossary can be used by ISEA and updated over time by ISEA and IPCS. The glossary is intended to be a living document that reflects the latest usage and maintains international harmonization of exposure terminology that can be practically applied to improve communication in exposure and related fields.

Analysis of Twitter Users’ Sharing of Official New York Storm Response Messages

Science.gov (United States)

Chary, Michael; Chason, Kevin

2014-01-01

Background Twitter is a social network where users read, send, and share snippets of text (“tweets”). Tweets can be disseminated through multiple means; on desktop computers, laptops, and mobile devices, over ethernet, Wi-Fi or cellular networks. This redundancy positions Twitter as a useful tool for disseminating information to the public during emergencies or disasters. Previous research on dissemination of information using Twitter has mostly investigated the characteristics of tweets that are most effective in raising consumer awareness about a new product or event. In particular, they describe characteristics that increase the chance the messages will be shared ("retweeted") by users. In comparison, little has been published on how information from municipal or state government agencies spreads on Twitter during emergency situations. Retweeting these messages is a way to enhance public awareness of potentially important instructions from public officials in a disaster. Objective The aim of this study is to (1) describe the tweets of select New York State and New York City agencies by public officials surrounding two notable recent winter storms that required a large-scale emergency response, and (2) identify the characteristics of the tweets of public officials that were most disseminated (retweeted). Methods For one week surrounding Superstorm Sandy (October 2012) and the winter blizzard Nemo (February 2013), we collected (1) tweets from the official accounts for six New York governmental agencies, and (2) all tweets containing the hashtags #sandy (or #nemo) and #nyc. From these data we calculated how many times a tweet was retweeted, controlling for differences in baseline activity in each account. We observed how many hashtags and links each tweet contained. We also calculated the lexical diversity of each tweet, a measure of the range of vocabulary used. Results During the Sandy storm, 3242 shared (retweeted) messages from public officials were

Integration and road tests of a self-sensing CNT concrete pavement system for traffic detection

Science.gov (United States)

Han, Baoguo; Zhang, Kun; Burnham, Tom; Kwon, Eil; Yu, Xun

2013-01-01

In this paper, a self-sensing carbon nanotube (CNT) concrete pavement system for traffic detection is proposed and tested in a roadway. Pre-cast and cast-in-place self-sensing CNT concrete sensors were simultaneously integrated into a controlled pavement test section at the Minnesota Road Research Facility (MnROAD), USA. Road tests of the system were conducted by using an MnROAD five-axle semi-trailer tractor truck and a van, respectively, both in the winter and summer. Test results show that the proposed self-sensing pavement system can accurately detect the passing of different vehicles under different vehicular speeds and test environments. These findings indicate that the developed self-sensing CNT concrete pavement system can achieve real-time vehicle flow detection with a high detection rate and a low false-alarm rate.

Integration and road tests of a self-sensing CNT concrete pavement system for traffic detection

International Nuclear Information System (INIS)

Han, Baoguo; Zhang, Kun; Yu, Xun; Burnham, Tom; Kwon, Eil

2013-01-01

In this paper, a self-sensing carbon nanotube (CNT) concrete pavement system for traffic detection is proposed and tested in a roadway. Pre-cast and cast-in-place self-sensing CNT concrete sensors were simultaneously integrated into a controlled pavement test section at the Minnesota Road Research Facility (MnROAD), USA. Road tests of the system were conducted by using an MnROAD five-axle semi-trailer tractor truck and a van, respectively, both in the winter and summer. Test results show that the proposed self-sensing pavement system can accurately detect the passing of different vehicles under different vehicular speeds and test environments. These findings indicate that the developed self-sensing CNT concrete pavement system can achieve real-time vehicle flow detection with a high detection rate and a low false-alarm rate. (paper)

Learning, Official Languages and Employment Equity Advisor ...

International Development Research Centre (IDRC) Digital Library (Canada)

Job Summary Plans and coordinates human resources services in the areas of Learning, Official Languages (OL) and Employment Equity (EE) while ensuring that management's needs are met. Provides operational services and advises managers and employees in determining their needs, analyzing problems, ...

TEST OF AN ANIMAL DRAWN FIELD IMPLEMENT CART

Directory of Open Access Journals (Sweden)

Paolo Spugnoli

2008-06-01

Full Text Available The field performance of a horse-drawn hitch cart equipped with a PTO system powered by the two cart ground wheels have been investigated. For this purpose field tests on clay and turf soil, with varying ballast and PTO torque, have been carried out pulling the cart by a tractor. Preliminary tests were aimed at assessing the traction capability of horse breed. These tests showed that the mean draught force given by two of these horses was 173daN, average working speed was about 1m*s-1, resulting a mean draught power developed by each horse of about 0.86kW. The PTO cart system performance has shown that the torque has not exceeded 2.4daN*m, maximum draught or PTO power was 1.15kW, rotation speed just higher than 400min-1, with mean efficiency of about 50%. These values are consistent with horse performance and small haymaking, fertilizing, seeding and chemical application machine requirements.

The American Military Advisor: Dealing with Senior Foreign Officials in the Islamic World

National Research Council Canada - National Science Library

Metrinko, Michael J

2008-01-01

"The American Military Advisor: Dealing with Senior Foreign Officials in the Islamic World" is a comprehensive guide for American military officers assigned as advisors to regional officials in places very different from the United States...

Language Officialization in Puerto Rico: Group-Making Discourses of Protectionism and Receptivity

Science.gov (United States)

Shenk, Elaine

2011-01-01

This article applies social constructionism and groupism theory to discourses on language officialization in Puerto Rico. It examines three argumentative texts presented prior to the passage of Law #4 in 1991 making Spanish the sole official language of the island. Grounded critical discourse theory maintains that language form and content are…

Strategies to Maintain School District Financial Solvency: Illinois School Business Officials' Recommendations

Science.gov (United States)

Williams, Ann C.; Kersten, Thomas A.

2013-01-01

The purpose of this study was to identify financial management strategies that school business officials have found most successful in achieving school district financial stability. To accomplish, 208 Illinois school business officials in six counties: Cook, DuPage, Kane, Lake, McHenry, and Will counties, excluding Chicago School District 299,…

Official statistics and Big Data

Directory of Open Access Journals (Sweden)

Peter Struijs

2014-07-01

Full Text Available The rise of Big Data changes the context in which organisations producing official statistics operate. Big Data provides opportunities, but in order to make optimal use of Big Data, a number of challenges have to be addressed. This stimulates increased collaboration between National Statistical Institutes, Big Data holders, businesses and universities. In time, this may lead to a shift in the role of statistical institutes in the provision of high-quality and impartial statistical information to society. In this paper, the changes in context, the opportunities, the challenges and the way to collaborate are addressed. The collaboration between the various stakeholders will involve each partner building on and contributing different strengths. For national statistical offices, traditional strengths include, on the one hand, the ability to collect data and combine data sources with statistical products and, on the other hand, their focus on quality, transparency and sound methodology. In the Big Data era of competing and multiplying data sources, they continue to have a unique knowledge of official statistical production methods. And their impartiality and respect for privacy as enshrined in law uniquely position them as a trusted third party. Based on this, they may advise on the quality and validity of information of various sources. By thus positioning themselves, they will be able to play their role as key information providers in a changing society.

The Official Radio and Television Institute in Spain

Science.gov (United States)

Ruiz, Anibal Arias

1976-01-01

A description of the Official School of Radio and Television which is designed to train university graduates in the fields of journalism, the sciences of cinema, radio and television, and advertising. (JY)

Biodiesel of distilled hydrogenated fat and biodiesel of distilled residual oil: fuel consumption in agricultural tractor

Energy Technology Data Exchange (ETDEWEB)

Camara, Felipe Thomaz da; Lopes, Afonso; Silva, Rouverson Pereira da; Oliveira, Melina Cais Jejcic; Furlani, Carlos Eduardo Angeli [Universidade Estadual Paulista (UNESP), Jaboticabal, SP (Brazil); Dabdoub, Miguel Joaquim [Universidade de Sao Paulo (USP), Ribeirao Preto (Brazil)

2008-07-01

Great part of the world-wide oil production is used in fry process; however, after using, such product becomes an undesirable residue, and the usual methods of discarding of these residues, generally contaminate the environment, mainly the rivers. In function of this, using oil and residual fat for manufacturing biodiesel, besides preventing ambient contamination, turning up an undesirable residue in to fuel. The present work had as objective to evaluate the fuel consumption of a Valtra BM100 4x2 TDA tractor functioning with methylic biodiesel from distilled hydrogenated fat and methylic biodiesel from distilled residual oil, in seven blends into diesel. The work was conducted at the Department of Agricultural Engineering, at UNESP - Jaboticabal, in an entirely randomized block statistical design, factorial array of 2 x 7, with three repetitions. The factors combinations were two types of methylic distilled biodiesel (residual oil and hydrogenated fat) and seven blends (B{sub 0}, B{sub 5}, B{sub 1}5, B{sub 2}5, B{sub 5}0, B{sub 7}5 and B{sub 1}00). The results had evidenced that additioning 15% of biodiesel into diesel, the specific consumption was similar, and biodiesel of residual oil provided less consumption than biodiesel from hydrogenated fat. (author)

Official portrait of Astronaut Anna L. Fisher

Science.gov (United States)

1985-01-01

Official portrait of Astronaut Anna L. Fisher. Fisher is posing with her helmet on the table in front of her and the American flag appears over the opposite shoulder (34357); Posing with an empty table in front of her and the American flag behind her (34358).

32 CFR 635.2 - Safeguarding official information.

Science.gov (United States)

2010-07-01

... official information. (a) Military police records are unclassified except when they contain national security information as defined in AR 380-5. (b) When military police records containing personal... records transmitted outside DOD per AR 25-55. (c) Military police records may also be released to Federal...

22 CFR 41.21 - Foreign Officials-General.

Science.gov (United States)

2010-04-01

...) Definitions. In addition to pertinent INA definitions, the following definitions are applicable: (1... possessing a travel document or other evidence of intention to enter or transit the United States to transact official business for that government or international organization. (2) Attendants, as used in INA 101(a...

British Television and Official Film, 1946-1951.

Science.gov (United States)

Wildy, Tom

1988-01-01

Discusses the relationships between the British Government's Information Services and both the British Broadcasting Corporation (BBC) and the commercial film trade after the BBC's television service resumed independent broadcasts in 1946. Examines proposals for using television as an alternative outlet for commercial and official films. (GEA)

Official portrait of astronaut Stephen S. Oswald

Science.gov (United States)

1992-01-01

Official portrait of astronaut Stephen S. Oswald. Oswald, a member of Astronaut Class 11, wears launch and entry suit (LES) with launch and entry helmet (LEH) positioned at his side. In the background is the United States (U.S.) flag and a space shuttle orbiter model.

Investigating the engine vibration in MF285 tractor effected by different blends of biodiesel fuel using statistical methods and ANFIS

Directory of Open Access Journals (Sweden)

A Safrangian

2017-05-01

Full Text Available Introduction Vibrations include a wide range of engineering sciences and discuss from different aspects. One of the aspects is related to various types of engines vibrations, which are often used as power sources in agriculture. The created vibrations can cause lack of comfort and reduce effective work and have bad influence on the health and safety. One of the important parameters of the diesel engine that has the ability to create vibration and knocking is the type of fuel. In this study, the effects of different blends of biodiesel, bioethanol and diesel on the engine vibration were investigated. As a result, a blend of fuels such as synthetic fuel that creates less vibration engine can be identified and introduced. Materials and Methods In this study, canola oil and methanol alcohol with purity of 99.99% and the molar ratio of 6:1 and sodium hydroxide catalyst with 1% by weight of oil were used for biodiesel production. Reactor configurations include: maintaining the temperature at 50 ° C, the reaction time of 5 minutes and the intensity of mixing (8000 rpm, and pump flow, 0.83 liters per minute. A Massey Ferguson (MF 285 tractor with single differential (2WD, built in 2012 at Tractor factory of Iran was used for the experiment. To measure the engine vibration signals, an oscillator with model of VM120 British MONITRAN was used. Vibration signals were measured at three levels of engine speed (2000, 1600, 1000 rpm in three directions (X, Y, Z. The analysis performed by two methods in this study: statistical data analysis and data analysis using Adaptive neuro-fuzzy inference system (ANFIS. Statistical analysis of data: a factorial experiment of 10×3 based on completely randomized design with three replications was used in each direction of X, Y and Z that conducted separately. Data were compiled and analyzed by SPSS 19 software. Ten levels of fuel were including of biodiesel (5, 15 and 25% and bioethanol (2, 4 and 6%, and diesel fuel. Data

Big Data as a Source for Official Statistics

Directory of Open Access Journals (Sweden)

Daas Piet J.H.

2015-06-01

Full Text Available More and more data are being produced by an increasing number of electronic devices physically surrounding us and on the internet. The large amount of data and the high frequency at which they are produced have resulted in the introduction of the term ‘Big Data’. Because these data reflect many different aspects of our daily lives and because of their abundance and availability, Big Data sources are very interesting from an official statistics point of view. This article discusses the exploration of both opportunities and challenges for official statistics associated with the application of Big Data. Experiences gained with analyses of large amounts of Dutch traffic loop detection records and Dutch social media messages are described to illustrate the topics characteristic of the statistical analysis and use of Big Data.

75 FR 78211 - Proposed Information Collection; Comment Request; Questionnaire for Building Permit Official

Science.gov (United States)

2010-12-15

... Budget (OMB) clearance of the Questionnaire for Building Permit Official (SOC-QBPO). The Census Bureau uses the Computer-Assisted Personal Interviewing (CAPI) electronic questionnaire SOC-QBPO to collect...; Questionnaire for Building Permit Official AGENCY: U.S. Census Bureau, Commerce. ACTION: Notice. SUMMARY: The...

78 FR 69814 - Proposed Information Collection; Comment Request; Questionnaire for Building Permit Official

Science.gov (United States)

2013-11-21

... Management and Budget (OMB) clearance of the Questionnaire for Building Permit Official (SOC-QBPO). The Census Bureau uses the Computer-Assisted Personal Interviewing (CAPI) electronic questionnaire SOC-QBPO...; Questionnaire for Building Permit Official AGENCY: U.S. Census Bureau. ACTION: Notice. SUMMARY: The Department...

50 CFR 216.95 - Official mark for “Dolphin-safe” tuna products.

Science.gov (United States)

2010-10-01

... 50 Wildlife and Fisheries 7 2010-10-01 2010-10-01 false Official mark for âDolphin-safeâ tuna... AND IMPORTING OF MARINE MAMMALS Dolphin Safe Tuna Labeling § 216.95 Official mark for “Dolphin-safe... Department of Commerce that may be used to label tuna products that meet the “dolphin-safe” standards set...

Are Teachers Public Officials for Defamation Purposes?

Science.gov (United States)

Bjorklun, Eugene C.

1993-01-01

Analyzes the law of defamation as it applies to teachers with special attention to the public official status of teachers. Concludes that public school teachers who are accused of deficiencies in the performance of their duties appear to have very little protection from false accusations under the law of defamation. (MLF)

How Justice System Officials View Wrongful Convictions

Science.gov (United States)

Smith, Brad; Zalman, Marvin; Kiger, Angie

2011-01-01

The wrongful conviction of factually innocent people is a growing concern within the United States. Reforms generated by this concern are predicated in part on the views of justice system participants. The authors surveyed judges, police officials, prosecutors, and defense lawyers in Michigan regarding their views of why wrongful convictions…

The experiences of parents who report youth bullying victimization to school officials.

Science.gov (United States)

Brown, James R; Aalsma, Matthew C; Ott, Mary A

2013-02-01

Current research offers a limited understanding of parental experiences when reporting bullying to school officials. This research examines the experiences of middle-school parents as they took steps to protect their bullied youth. The qualitative tradition of interpretive phenomenology was used to provide in-depth analysis of the phenomena. A criterion-based, purposeful sample of 11 parents was interviewed face-to-face with subsequent phone call follow-ups. Interviews were taped, transcribed, and coded. MAX qda software was used for data coding. In analyzing the interviews, paradigm cases, themes, and patterns were identified. Three parent stages were found: discovering, reporting, and living with the aftermath. In the discovery stage, parents reported using advice-giving in hopes of protecting their youth. As parents noticed negative psychosocial symptoms in their youth escalate, they shifted their focus to reporting the bullying to school officials. All but one parent experienced ongoing resistance from school officials in fully engaging the bullying problem. In the aftermath, 10 of the 11 parents were left with two choices: remove their youth from the school or let the victimization continue. One paradigm case illustrates how a school official met parental expectations of protection. This study highlights a parental sense of ambiguity of school officials' roles and procedures related to school reporting and intervention. The results of this study have implications in the development and use of school-wide bullying protocols and parental advocacy.

37 CFR 2.154 - Publication in Official Gazette.

Science.gov (United States)

2010-07-01

..., DEPARTMENT OF COMMERCE RULES OF PRACTICE IN TRADEMARK CASES Publication of Marks Registered Under 1905 Act § 2.154 Publication in Official Gazette. A notice of the claim of benefits under the Act of 1946 and a...

Desempenho operacional de um trator agrícola equipado alternadamente com pneus radiais e diagonais Operational performance of an agricultural tractor equipped alternately with radial and diagonal tires

Directory of Open Access Journals (Sweden)

Jackson A. Barbosa

2005-08-01

Full Text Available A utilização de pneu radial em tratores agrícolas na década de 1950 resultou em redução das perdas de potência oriundas da resistência ao rolamento e patinagem, com conseqüente melhoria no desenvolvimento da tração. Este trabalho teve como objetivo comparar o desempenho operacional de um trator agrícola equipado alternadamente com pneus radiais e diagonais. A avaliação foi realizada a partir de análises de parâmetros indicadores do desempenho dos referidos pneus sob condições específicas de trabalho. O uso de pneus radiais proporcionou incrementos nos valores de capacidade de tração e potência na barra, diminuição nos valores de consumo específico de combustível e não causou variações no consumo horário de combustível.The use of radial tire in agricultural tractors in the decade of 1950 resulted in the reduction of the potency losses originated from the rolling resistance and slippage, with consequent improvement in the traction development. This work had as objective to compare the operational performance of an agricultural tractor, equipped alternately with radial and diagonal tires. The evaluation was accomplished, starting from analyses of indicative parameters of the performance of the referred tires under specific conditions of work. The use of radial tires provided increments in the values of traction capacity and drawbar pull, decrease in values of specific consumption of fuel, and didn't cause variations in the hourly consumption of fuel.

Officiating Role Influences the Physical Match Activity Profiles of Rugby League Touch Judges and Referees

Directory of Open Access Journals (Sweden)

Pearce Leesa

2017-08-01

Full Text Available This study investigated the effect of the officiating role on physical activity profiles of rugby league match officials during match-play. Physical performance indicators were collated from 23 match officials, resulting in 78 observations. Match officials were categorised into two groups: referees and touch judges. Microtechnology facilitated the quantification of total distance (m, relative distance (m⋅min-1, maximum velocity (m⋅s-1, the percentage of high intensity running distance (% total > 3.01 m⋅s-1, walking distance (5 m⋅s-1. Multivariate analysis modelled the main effect of the officiating role with follow up univariate analyses identifying significant differences. A significant effect was noted (V = 750; F(8, 66 = 24.71; p < 0.05 with referees covering a greater total distance (7767 ± 585 vs. 7022 ± 759 m, relative distance (90 ± 6 vs. 82 ± 8 m⋅min-1, jogging distance (3772 ± 752 vs. 3110 ± 553 m, and fast jogging distance (2565 ± 631 vs. 1816 ± 440 m compared to touch judges. Touch judges covered greater distances while sprinting (1012 ± 385 vs. 654 ± 241 m. Results provide important guidance in the development of training programs for match officials.

Official portrait of Astronaut Ronald E. McNair

Science.gov (United States)

1985-01-01

Official portrait of Astronaut Ronald E. McNair. McNair is in the blue shuttle flight suit, standing in front of a table which holds a model of the Space Shuttle. An American flag is visible behind him.

Helping Raise the Official Statistics Capability of Government Employees

Directory of Open Access Journals (Sweden)

Forbes Sharleen

2016-12-01

Full Text Available Both the production and the use of official statistics are important in the business of government. In New Zealand, concern persists about many government advisors’ low level of statistical capability. One programme designed specifically to enhance capability is New Zealand’s National Certificate of Official Statistics, first introduced in 2007 and originally targeted at government policy analysts and advisors. It now includes participants from many agencies, including the National Statistics Office. The competency-based 40-credit certificate comprises four taught units that aim to give students skills in basic official statistics and in critically evaluating statistical, research, policy, or media publications for their quality (of data, survey design, analysis, and conclusions and appropriateness for some policy issue (e.g., how to reduce problem gambling, together with an ‘umbrella’ workplace-based statistics project. Case studies are used to embed the statistics learning into the real-world context of these students. Several surveys of students and their managers were undertaken to evaluate the effectiveness of the certificate in terms of enhancing skill levels and meeting organisational needs and also to examine barriers to completion of the certificate. The results were used to both modify the programme and extend its international applicability.

HLT profile of the official South African languages

CSIR Research Space (South Africa)

Grover, AS

2010-05-01

Full Text Available Human Language technologies (HLT) have been identified as a priority area by South African government to enable its eleven official languages technologically. We present the results of a technology audit for the South African HLT landscape...

12 CFR 925.32 - Official membership insignia.

Science.gov (United States)

2010-01-01

... the words “Member Federal Home Loan Bank System.” [58 FR 43542, Aug. 17, 1993. Redesignated at 61 FR... 12 Banks and Banking 7 2010-01-01 2010-01-01 false Official membership insignia. 925.32 Section 925.32 Banks and Banking FEDERAL HOUSING FINANCE BOARD FEDERAL HOME LOAN BANK MEMBERS AND HOUSING...

29 CFR 1928.52 - Protective frames for wheel-type agricultural tractors-test procedures and performance requirements.

Science.gov (United States)

2010-07-01

... a 4,410-lb (2,000-kg) weight acting as a pendulum. The impact face of the weight shall be 27 ± 1 in..., or blocking shift or break during the test, the test shall be repeated. (ii) H = Vertical height of... test procedure; and (C) Impact at side. The blocking and restraining shall conform to paragraphs (d)(3...

ADMINISTRATIVE CIRCULAR NO. 20 USE OF PRIVATE VEHICLES FOR OFFICIAL DUTY - INSURANCE

CERN Multimedia

Human Resources Division - Tel. 73634

2002-01-01

Administrative Circular No. 20 on the use of private vehicles for official duty is shortly to be revised with a view to making certain procedures more flexible. CERN no longer requires members of the personnel to take out optional private insurances (insurance for official journeys, legal assistance insurance) in the case of duty travel for the Organization, since the associated risks are covered by CERN's own insurance. Pending the above mentioned revision, members of the personnel may continue to use their private vehicles for official duty in accordance with the others provisions laid down in the Circular Reminder: Owners of private vehicles must of course be insured by the normal compulsory car insurance required by the laws of the Host States when driving on and off the CERN sites.

Universal machine ''Shtrek'' and the tractor-lifter with pneumatic-equipment control. [Auxiliary multipurpose materials handling equipment

Energy Technology Data Exchange (ETDEWEB)

Bal' bert, B M; Borumenskiy, V A; Lishenko, A P; Mitchenko, G A

1982-01-01

The machine ''Shtrek'' is described. It makes it possible to mechanize over 20 auxiliary operations: loading-unloading operations: extraction of old and deformed timbering; dissmantling of obstructions; erection of different types of timbering; making and restoring of drainage channels; laying and straightening of a drift and its leveling; assembly and disassembly of pipelines and mine equipment, etc. Depending on the type of operation, the machine has the corresponding suspended equipment. The elementary variant has a limited area of application at mines of the central region of the Dunbass. Currently a pneumatic variant of the machine ''Shtrek'' has been developed. The electric motor and the starter of the pumping equipment of the machine have been replaced by a pneumatic motor and pneumatically controlled valve KTM-50. In this case there was significant reduction in the weight of the pumping equipment and in its overall dimensions; the electric drive of the hydraulic distributors for controlling the mechanisms were replaced by simpler pneumatic ones; the logical circuit of the control system was constructed on the USEPPA elements. A specialized tractor-lifter designed for moving suspended loads is described for auxiliary operations in the near-face zone of the preparatory drifts. The machine also lifts and lowers the boom, rotates the boom by 270/sup 0/ and additionally lifts and lowers the weight-lifting hook.

Energy consumption of an agricultural an agricultural tractor operating in dynamometer using with diesel and chicken oil biodiesel; Consumo energetico de um trator agricola operando em bancada dinamometrica com oleo diesel e biodiesel de oleo de frango

Energy Technology Data Exchange (ETDEWEB)

Fiorese, Diego Augusto [Universidade Estadual Paulista Julio de Mesquita Filho (FCA/UNESP), Botucatu, SP (Brazil). Fac. de Ciencias Agronomicas. Dept. de Engenharia Rural], email: dafiorese@yahoo.com.br; Dallmeyer, Arno Udo; Romano, Leonardo Nabaes; Schlosser, Jose Fernando [Universidade Federal de Santa Maria (UFSM), RS (Brazil)

2011-07-01

The efficiency of energy use in agricultural machinery is dependent on the efficiency of internal combustion diesel cycle, their genuine propellants. However, some biofuels may offer a better yield due to some peculiar characteristics such distinctions in calorific value. Many studies have demonstrated a better utilization of the energy content when operating with biodiesel and with binary mixtures with diesel oil. In this study, tests were conducted on a dynamometer bench to evaluate the energy consumption of a tractor engine with four cylinders and 53 kW (72 hp), operating with biodiesel and chicken oil mixture with diesel oil. In the tests were evaluated six ratios (B5, B20, B40, B60, B80 and B100). The results showed that increasing the proportion of biodiesel was favorable to improve the utilization of the energy content, thus increasing the thermal efficiency of the engine. The best result was obtained with pure biodiesel (B100) with consumption of 395.47 MJ.h{sup -1}and efficiency of 32.35%. On the other hand the witness had the lowest use B5 with 428.20 MJ.h{sup -1} and thermal efficiency of 30.67%. (author)

Avaliação de alguns fatores ergonômicos nos tratores "Feller-buncher" e "Skidder" utilizados na colheita de madeira Evaluation of some ergonomic factors in Feller-buncher and Skidder tractors used in wood harvesting

Directory of Open Access Journals (Sweden)

Julião Soares de Souza Lima

2005-04-01

Full Text Available Este trabalho foi realizado com tratores florestais utilizados em um sistema mecanizado de colheita de madeira em povoamento de eucalipto, tendo como objetivo avaliar quantiqualitativamente as dimensões de acesso, assento, comandos, campo visual, condições térmicas e vibração no posto dos operadores. O acesso ao posto do operador no trator "Feller-buncher" apresentou um grau de dificuldade, sendo classificado, na avaliação qualitativa, como médio e, no "Skidder", como bom. A abertura das portas de acesso apresenta ângulo menor que 90º, dificultando, assim, a entrada e saída do operador. O posto do operador do trator "Feller-buncher" foi classificado como médio na avaliação qualitativa, em virtude de o espaço livre da plataforma de apoio ser de 30% da área total e, no "Skidder", de 55% da área total, sendo classificado como bom. O campo visual frontal do "Feller-buncher", mesmo tendo uma área do pára-brisa maior, é limitado pela presença do cabeçote, tanto em operações diurnas quanto noturnas, sendo, portanto, inferior ao do "Skidder".This work was carried out in forest tractors used in a mechanized system for wood harvesting in a stand of eucalyptus, to evaluate quanti-qualitatively the dimensions of access, seat, commands, field view, thermal conditions and vibration in the operators' station. The access to the operator's station in the Feller-Buncher tractor presented a degree of difficulty classified in the qualitative evaluation as average and the Skidder as good. The opening of the access doors presents an angle smaller than 90º, thus rendering the entrance and exit of the operator more difficult. The operators station of the Feller-Buncher tractor was classified as medium in the qualitative evaluation, due to the free space of the support platform being 30% of the total area, and in the Skidder 55%, therefore being classified as good. The front field view in Feller-Buncher, even having a wider windscreen area, is

The Use of Official Languages Act : Diversity Affirmed? | Pretorius ...

African Journals Online (AJOL)

Potchefstroom Electronic Law Journal/Potchefstroomse Elektroniese Regsblad ... The Act represents a very limited normative appreciation of this constitutional ... the use of official languages not being reserved for the legislative process, but ...

Software Testing An ISEB Intermediate Certificate

CERN Document Server

Hambling, Brian

2009-01-01

Covering testing fundamentals, reviews, testing and risk, test management and test analysis, this book helps newly qualified software testers to learn the skills and techniques to take them to the next level. Written by leading authors in the field, this is the only official textbook of the ISEB Intermediate Certificate in Software Testing.

Official website usage by university in crisis communication: Case study from Islamic University of Indonesia

OpenAIRE

Prastya, Narayana Mahendra

2017-01-01

This paper aims to discuss about crisis communication activities using official website in educational organizations. The case of this paper is how Islamic University of Indonesia (UII) responding the crisis following the death of three students in UII freshman orientation program. The data of this research using UII official statement that posted in the university official website between 23 January 2017- 31 January 2017. The consideration to choose the time frame because it was the most cri...

Official Reports of Enrollment as of September 30, 2013. Montgomery County Public Schools

Science.gov (United States)

Erickson, Marianne

2013-01-01

This document is a combination of two reports produced for Montgomery County Public Schools (MCPS) by the Department of Policy, Records, and Reporting: (1) Official Race/Ethnic Membership of Students as of September 30, 2013; and (2) Official Report of Enrollment by Grade and School as of September 30, 2013. Both reports provide student data for…

Test report for cesium powder and pellets inner container decontamination method determination test

International Nuclear Information System (INIS)

Kelly, D.L.

1998-01-01

This report documents the decontamination method determination testing that was performed on three cesium powder and pellets inner container test specimens The test specimens were provided by B and W Hanford Company (BVMC). The tests were conducted by the Numatec Hanford Company (NHC), in the 305 Building. Photographic evidence was also provided by NHC. The Test Plan and Test Report were provided by Waste Management Federal Services, Inc., Northwest Operations. Witnesses to testing included a test engineer, a BC project engineer, and a BC Quality Assurance (QA) representative. The Test Plan was modified with the mutual decision of the test engineer, the BWHC project engineer, and the BVMC QA representative. The results of this decision were written in red (permanent type) ink on the official copy of the test procedure, Due to the extent of the changes, a summary of the test results are provided in Section 3.0 of this Test Report. In addition, a copy of the official copy field documentation obtained during testing is included in Appendix A. The original Test Plan (HNF-2945) will be revised to indicate that extensive changes were required in the field during testing, however, the test documentation will stand as is (i.e., it will not be retyped, text shaded, etc.) due to the inclusion of the test parameters and results into this Test Report

20 CFR 702.211 - Notice of employee's injury or death; designation of responsible official.

Science.gov (United States)

2010-04-01

... facilitate the filing of notices, each employer shall designate at least one individual responsible for...; designation of responsible official. 702.211 Section 702.211 Employees' Benefits EMPLOYMENT STANDARDS... of responsible official. (a) In order to claim compensation under the Act, an employee or claimant...

7 CFR 70.110 - Requirements for sanitation, facilities, and operating procedures in official plants.

Science.gov (United States)

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Requirements for sanitation, facilities, and operating... Requirements for sanitation, facilities, and operating procedures in official plants. (a) The requirements for sanitation, facilities, and operating procedures in official plants shall be the applicable provisions stated...

31 CFR 515.553 - Bank accounts of official representatives in Cuba of foreign governments.

Science.gov (United States)

2010-07-01

... representatives in Cuba of foreign governments. 515.553 Section 515.553 Money and Finance: Treasury Regulations... Bank accounts of official representatives in Cuba of foreign governments. Specific licenses are issued authorizing payments from accounts of official representatives in Cuba of foreign governments for transactions...

Requirements of the official permission of irradiation techniques

International Nuclear Information System (INIS)

Urban, A.

1979-01-01

The procedure and organization of the official licensing of radiation sources in Hungary are reviewed. Since January 1979 the radiation sources are qualified according to a uniform system of requirements for the Comecon countries. An example of qualification and the criteria of classification are detailed. (L.E.)

29 CFR 501.7 - Cooperation with Federal officials.

Science.gov (United States)

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false Cooperation with Federal officials. 501.7 Section 501.7 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION, DEPARTMENT OF LABOR REGULATIONS ENFORCEMENT OF CONTRACTUAL OBLIGATIONS FOR TEMPORARY ALIEN AGRICULTURAL WORKERS ADMITTED UNDER SECTION 218 OF...

EDXRF analysis of Yanhedian Ru kiln and Jun official kiln porcelain

International Nuclear Information System (INIS)

Wen Chang; Zhao Huixian; Li Guoxia; Gao Zhengyao; Zhao Weijuan; Sun Hongwei; Guo Min; Xie Jianzhong; Li Rongwu; Guo Peiyu

2009-01-01

The chemical components of the body and glaze samples of some Ru porcelains from Yanhedian kiln and Jun official porcelains from Juntai kiln are determined by the technology of Energy Dispersive X-ray Fluorescence(EDXRF) in this work. The difference of the two kiln's glaze and body are analyzed by factor analysis method of Multi-dimensional statistical analysis. The results indicate that Yanhedian Ru porcelains can be well distinguished from Jun official porcelains from Juntai kiln. This evidence once again proves that Jun ceramics and Ru ceramics can be distinguished obviously. (authors)

Resources and estuarine health: Perceptions of elected officials and recreational fishers

Energy Technology Data Exchange (ETDEWEB)

Burger, J.; Sanchez, J.; McMahon, M.; Leonard, J.; Lord, C.G.; Ramos, R.; Gochfeld, M.

1999-10-29

It is important to understand the perceptions of user groups regarding both the health of their estuaries and environmental problems requiring management. Recreational fishers were interviewed to determine the perceptions of one of the traditional user groups of Barnegat Bay (New Jersey), and elected officials were interviewed to determine if the people charged with making decisions about environmental issues in the bay held similar perceptions. Although relative ratings were similar, there were significant differences in perceptions of the severity of environmental problems, and for the most part, public officials thought the problems were more severe than did the fishers. Personal watercraft (often called Jet Skis) were rated as the most severe problem, followed by chemical pollution, junk, over fishing, street runoff, and boat oil. Small boats, sailboats, wind surfers, and foraging birds were not considered environmental problems by either elected officials or fishermen. The disconnect between the perceptions of the recreational fishers and those of the locally elected public officials suggests that officials may be hearing from some of the more vocal people about problems, rather than from the typical fishers. Both groups felt there were decreases in some of the resources in the bay; over 50% felt the number of fish and crabs had declined, the size of fish and crabs had declined, and the number of turtles had declined. Among recreational fishers, there were almost no differences in perceptions of the severity of environmental problems or in changes in the bay. The problems that were rated the most severe were personal watercraft and over fishing by commercial fishers. Recreational fishers ranked sailboats, wind surfers, and fishing by birds as posing no problem for the bay. Most fishers felt there had been recent major changes in Barnegat Bay, with there now being fewer and smaller fish, fewer and smaller crabs, and fewer turtles. The results suggest that the

25 CFR 2.19 - Action by Area Directors and Education Programs officials on appeal.

Science.gov (United States)

2010-04-01

... Programs officials on appeal. (a) Area Directors, Area Education Programs Administrators, Agency... 25 Indians 1 2010-04-01 2010-04-01 false Action by Area Directors and Education Programs officials on appeal. 2.19 Section 2.19 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR PROCEDURES...

A History of “Who Speaks for Islam?” in Bosnia-Herzegovina: An Official Versus Popular Islam Debate

Directory of Open Access Journals (Sweden)

Hüsrev Tabak

2017-06-01

Full Text Available This paper examines the organisation of popular and official Islam during and after communism in Bosnia-Herzegovina. Through studying the interaction between the popular and the official forms of Islam in the historical context, this paper unfolds the debate on who speaks for Islam? That took place between official representatives and popular Islamic groups and movements in the former Yugoslavian republic. Such an enquiry revealed firstly that a close contact with the existing regime (regardless of its ideology is essential for becoming and remaining as the official Islamic authority, as seen in the Islamic Community’s pro-Titoist stance throughout in the former Yugoslavia. The findings of the enquiry secondly suggest that popular Islam and official Islam represent transitive positions; meaning that a popular Islamic movement can become the official Islam, vice versa. Accordingly, a former popular Islam front, the Mladi Muslimani (Young Muslims, in Yugoslavia evolved into an official Islamic authority after the dissolution of the country and by the Bosnia-Herzegovina’s establishment, in the scope of which new popular Islamic groups bred.

Religious officials' knowledge, attitude, and behavior towards smoking and the new tobacco law in Kahramanmaras, Turkey.

Science.gov (United States)

Sucakli, Mustafa Haki; Ozer, Ali; Celik, Mustafa; Kahraman, Hasan; Ekerbicer, Hasan Cetin

2011-07-28

Tobacco control effort should be first started in people that are looked upon as role models for the general population. We aimed to determine the knowledge, attitude, and behavior of religious officials towards smoking and the new tobacco law. The study group was comprised of 492 Imams and 149 Quran course instructors working in Kahramanmaras city of Turkey, 641 religious officials in total, and our survey form was applied on 406 (63.3%) of those religious officials who agreed to participate in the study. Twenty-eight (6.9%) participants were current smokers and 35 (8.6%) were ex-smokers. 99.8% of the religious officials believed that smoking was harmful and/or prohibited in terms of religion. While 43.6% respondents thought smoking was "haram" (forbidden by Islam), 56.2% believed it was "makruh" (something regarded as reprehensible, though not forbidden by God according to Islam). 85.2% of the participants were aware of the recent tobacco law. 55.5% of the respondents, who were aware of the recent tobacco law, evaluated their knowledge level on the law as adequate, whereas 44.5% evaluated it as inadequate 92.4% of the participants noted that religious officials should play active roles in tobacco control effort. Smoking rate among religious officials is much lower than that of general public. In order to help religious officials to take a more active role on this issue, they should be trained on the subject and appropriate platforms should be established.

18 CFR 1316.10 - Officials not to benefit.

Science.gov (United States)

2010-04-01

... breach of this contract, and TVA shall have the right to exercise all remedies provided in this contract... GENERAL CONDITIONS AND CERTIFICATIONS FOR INCORPORATION IN CONTRACT DOCUMENTS OR ACTIONS Text of Conditions and Certifications § 1316.10 Officials not to benefit. When so indicated in TVA contract documents...

29 CFR 501.46 - Retention of official record.

Science.gov (United States)

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false Retention of official record. 501.46 Section 501.46 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION, DEPARTMENT OF LABOR REGULATIONS ENFORCEMENT OF CONTRACTUAL OBLIGATIONS FOR TEMPORARY ALIEN AGRICULTURAL WORKERS ADMITTED UNDER SECTION 218 OF THE...

29 CFR 502.6 - Cooperation with DOL officials.

Science.gov (United States)

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false Cooperation with DOL officials. 502.6 Section 502.6 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION, DEPARTMENT OF LABOR REGULATIONS ENFORCEMENT OF CONTRACTUAL OBLIGATIONS FOR TEMPORARY ALIEN AGRICULTURAL WORKERS ADMITTED UNDER SECTION 218 OF THE...

29 CFR 502.46 - Retention of official record.

Science.gov (United States)

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false Retention of official record. 502.46 Section 502.46 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION, DEPARTMENT OF LABOR REGULATIONS ENFORCEMENT OF CONTRACTUAL OBLIGATIONS FOR TEMPORARY ALIEN AGRICULTURAL WORKERS ADMITTED UNDER SECTION 218 OF THE...

Challenges to the Reliability of Officially Published Statistics for ...

African Journals Online (AJOL)

Challenges to the Reliability of Officially Published Statistics for Extension Work. ... AFRICAN JOURNALS ONLINE (AJOL) · Journals · Advanced Search · USING ... of Nigeria based on the National Bureau of Statistics, for the period 1972-2007.

Individual monitoring with official electronic dosemeters in Germany - concepts and reality

International Nuclear Information System (INIS)

Martini, E.; Wahl, W.; Huebner, S.; Freynhagen, D.; Staemmler, M.

2005-01-01

Full text: Active (electronic) personal dosemeters (APD) are radiometers, which are equipped as active or passive dosimeters. They can directly indicate a dose rate and/or the dose integrated during a certain period (direct-indicating, active electronic personal dosemeters mentioned) or only over a separate reader (direct-selectable, passive electronic personal dosemeters mentioned). A concept is presented for the use of passive or active electronic personal dosemeters in Germany as official dosemeters, e.g. in hospitals. The concept features a net-based approach for secure data communication between readers for passive and active electronic personal dosemeters und the official personal dosimetry monitoring service(s), taking the German policies (StrISchV und RoeV in hospitals) into account. The net-based solution includes a processor controlled interface via TCP/IP connected to the dosimetry reader(s), und reader interfaces, an official interim data bank and all the necessary equipment such as PC, Raid-configuration, USV support, network connection and further details. Investigations have been started to achieve highest-level data manipulation security, data completeness und data correctness. (author)

Incidence of Trailer Frame Structure on Driver’s Safety during Log Transportation

Directory of Open Access Journals (Sweden)

Marco Manzone

2017-11-01

Full Text Available The frame structure of the trailer may influence both the traction and the tractor-trailer stability, especially along sloped paths. The aim of this research was to analyze a trailer overturning and the strains on the connected tractors (wheeled, or crawled during log transportation (loose or tied along a hillside. Two two-axle trailers were used: tandem and turntable steering. Three types of measurements were carried out during the field tests: (i the detachment from the ground of the rear upstream wheels (or crawler; (ii the transversal and longitudinal strains occurring when the trailer overturned (and released the hooking system of the tractor; (iii the lateral deviation of the rear wheels (or crawler of the tractor. The study highlighted that the two-axle trailer with turntable steering combined with the crawl tractor gave better results in terms of safety during trailer overturning. In addition, independent of the type of trailer, a tied load was found to be more dangerous than a load restrained only by steel struts, because when overturning, the load forms a single unit with the trailer mass which increases the strains.

Monitoring external and internal loads of brazilian soccer referees during official matches.

Science.gov (United States)

Costa, Eduardo C; Vieira, Caio M A; Moreira, Alexandre; Ugrinowitsch, Carlos; Castagna, Carlo; Aoki, Marcelo S

2013-01-01

This study aimed to assess the external and internal loads of Brazilian soccer referees during official matches. A total of 11 field referees (aged 36.2 ± 7.5 years) were monitored during 35 matches. The external (distance covered, mean and maximal speed) and internal load parameters (session ratings of perceived exertion [RPE] training load [TL], Edwards' TL, and time spent in different heart rate [HR] zones) were assessed in 3-4 matches per referee. External load parameters were measured using a wrist Global Positioning System (GPS) receiver. No differences in distance covered (5.219 ± 205 vs. 5.230 ± 237 m) and maximal speed (19.3 ± 1.0 vs. 19.4 ± 1.4 km·h(-1)) were observed between the halves of the matches (p > 0.05). However, the mean speed was higher in the first half of the matches (6.6 ± 0.4 vs. 6.4 ± 0.3 km·h(-1)) (p external and internal load demands during official matches. The portable GPS/HR monitors and session RPE method can provide relevant information regarding the magnitude of the physiological strain during official matches. Key PointsHigh external and internal loads were imposed on Brazilian soccer referees during official matches.There was a high positive correlation between a subjective marker of internal load (session RPE) and parameters of external load (distance covered between 90-100% of HRmax and maximal speed).There was a high positive correlation between session RPE method and Edwards' method.Session RPE seems to be a reliable marker of internal load.The portable GPS/HR monitors and the session RPE method can provide relevant information regarding the magnitude of external and internal loads of soccer referees during official matches.

Relação cinemática em um trator 4x2 com tração dianteira auxiliar equipado com pneus radiais na eficiência de tração Kinematic relation on radial tires in a front wheel assist tractor on traction efficience

Directory of Open Access Journals (Sweden)

Mauro Fernando Ferreira

2000-12-01

Full Text Available Diferentes combinações de pressões internas dos pneus do trator pode afetar a interferência entre eixos motrizes dos tratores agrícolas, principalmente com pneus do tipo radial. Um trator 4x2 com tração dianteira auxiliar foi analisado quanto a seu desempenho em tração. Pneus de carcaça radial com diferentes pressões internas foram utilizados, com o objetivo de variar as relações cinemá ticas entre os eixos. Mediram-se o patinamento das rodas dianteiras e traseiras, a resistência ao rolamento e a força de tração, em duas condições de solo (firme e solto. Os resultados obtidos permitiram verificar que a eficiência de tração não foi significativamente influenciada pela variação das relações cinemáticas de 0,962 a 1,102. As máximas eficiências de tração ocorreram com relaçõ es cinemáticas variáveis dentro da faixa estudada e de acordo com as cargas impostas à barra de tração.Different combinations of tractor tire inflating pressure may affect interference between tractor axles, mainly with radial tires type. A front wheel assist tractor was studied in its traction performance. Radial tires with different inflation pressure were used, changing kinematic relations between axles. The measured parameters were: front and rear slip, rolling resistence and drawbar pull in two soil conditions (firm and loose. The results indicate that traction efficience was not significantly influenced by kinematic relations variation between 0.962 to 1.102. The maximum traction efficiency ocurred within the range studied and according to drawbar pull.

A numerical study of scale effects on performance of a tractor type podded propeller

Directory of Open Access Journals (Sweden)

Choi Jung-Kyu

2014-06-01

Full Text Available In this study, the scale effect on the performance of the podded propeller of tractor type is investigated. Turbulent flow computations are carried out for Reynolds numbers increasing progressively from model scale to full scale using the CFD analysis. The result of the flow calculation for model scale Reynolds numbers agrees well with that of the experiment of a large cavitation tunnel. The existing numerical analysis indicates that the performance of the podded propeller blades is mainly influenced by the advance coefficient and relatively little by the Reynolds number. However, the drag of pod housing with propeller in operation is different from that of pod housing without propeller due to the acceleration and swirl of propeller slipstream which is altered by propeller loading as well as the pressure recovery and friction according to Reynolds number, which suggests that the pod housing drag under the condition of propeller in operation is the key factor of the scale effect on the performance between model and full scale podded propellers. The so called ‘drag ratio’, which is the ratio of pod housing drag to total thrust of podded propeller, increases as the advance coefficient increases due to accelerated flow in the slipstream of the podded propeller. However, the increasing rate of the drag ratio reduces continuously as the Reynolds number increases from model to full scale progressively. The contribution of hydrodynamic forces, which acts on the parts composed of the pod housing with propeller operating in various loading conditions, to the thrust and the torque of the total propeller unit are presented for a range of Reynolds numbers from model to full scales.

29 CFR 801.75 - Certification of official record.

Science.gov (United States)

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false Certification of official record. 801.75 Section 801.75 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION, DEPARTMENT OF LABOR OTHER LAWS... Decision and Order issued under this part, the Chief Administrative Law Judge shall promptly certify and...

Research on the Achievement Motivation of the University Student Village Officials in the Suburbs of Beijing

Institute of Scientific and Technical Information of China (English)

YANG Xin

2011-01-01

[Objective] The aim was to explore the achievement motivation of the university student village officials in the suburbs of Beijing.[Method] The research made an investigation on 429 university student village officials in the suburbs of Beijing by the Achievements Motive Scale (AMS). [ Result] The achievement motivation of these student village officials was not on a high level, but they tended to pursue the success motivation rather than the motivation to avoid failures obviously. There was a significant difference in the achievement motivation between different genders, majors and jobs. The males' motivation for success was higher than the females'. The motivation of avoiding failures among officials in Humanities was higher than in Science and in Fine Art. And the university student village officials in professional and technical posts or in business posts rated the motivation to avoid failures more important than in basic management posts. But achievement motivations in different urban-rural areas, educational levels, political backgrounds, whether student leaders or not, and durations were no definite differences. Besides, it had a significant effect on these student village officials' achievement motivation whether advices and suggestions were accepted; if yes,the motivation was higher. [ Conclusion] This study had provided stability and development for building rural talent groups.

[Interlaboratory Study on Evaporation Residue Test for Food Contact Products (Report 1)].

Science.gov (United States)

Ohno, Hiroyuki; Mutsuga, Motoh; Abe, Tomoyuki; Abe, Yutaka; Amano, Homare; Ishihara, Kinuyo; Ohsaka, Ikue; Ohno, Haruka; Ohno, Yuichiro; Ozaki, Asako; Kakihara, Yoshiteru; Kobayashi, Hisashi; Sakuragi, Hiroshi; Shibata, Hiroshi; Shirono, Katsuhiro; Sekido, Haruko; Takasaka, Noriko; Takenaka, Yu; Tajima, Yoshiyasu; Tanaka, Aoi; Tanaka, Hideyuki; Tonooka, Hiroyuki; Nakanishi, Toru; Nomura, Chie; Haneishi, Nahoko; Hayakawa, Masato; Miura, Toshihiko; Yamaguchi, Miku; Watanabe, Kazunari; Sato, Kyoko

2018-01-01

An interlaboratory study was performed to evaluate the equivalence between an official method and a modified method of evaporation residue test using three food-simulating solvents (water, 4% acetic acid and 20% ethanol), based on the Japanese Food Sanitation Law for food contact products. Twenty-three laboratories participated, and tested the evaporation residues of nine test solutions as blind duplicates. For evaporation, a water bath was used in the official method, and a hot plate in the modified method. In most laboratories, the test solutions were heated until just prior to evaporation to dryness, and then allowed to dry under residual heat. Statistical analysis revealed that there was no significant difference between the two methods, regardless of the heating equipment used. Accordingly, the modified method provides performance equal to the official method, and is available as an alternative method.

Official dosimetry with individual electronic dosemeters - the concept in Germany

International Nuclear Information System (INIS)

Czarwinski, R.; Kaulard, J.; Pfeffer, W.

2005-01-01

Full text: Presently, in Germany passive dosemeters (film batches, RPL, TLD) are used for the official individual monitoring of occupational exposed personal. The application of electronic individual dosemeters (EPD) is carried out mainly for the operative radiation protection control particularly in nuclear power engineering companies, big hospitals und research centres. This means in such institutions double monitoring exists - legally and operatively. A crucial advantage of EPD compared to passive dosemeter is the possibility to adapt the monitoring period to the working time in the control area, e.g. a job related monitoring is available. Germany started a project for an optimized implementation of EPD into the official dosimetry. Objective of the project whose results will be described in the paper is the harmonization of radiation protection of companies workers and outside workers concerning the record of individual and job related exposures. The approval of the EPD by the Federal and Laender authorities as an official dosimetric system demands the implementation of special requirements concerning the data acquisition, data transfer and data evaluation. These issues are focuses of the Federal research project, supervised by the Federal Office for Radiation Protection (BfS) and performed by the Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS), Cologne to develop a concept in the first stage. (author)

Manual on Uniform Traffic Control Devices (MUTCD) - Search Official Rulings

Data.gov (United States)

Department of Transportation — The MUTCD Official Rulings is a resource that allows web site visitors to obtain information about requests for changes, experiments, and interpretations related to...

25 CFR 900.229 - What role will the awarding official play during an appeal?

Science.gov (United States)

2010-04-01

... 25 Indians 2 2010-04-01 2010-04-01 false What role will the awarding official play during an appeal? 900.229 Section 900.229 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR, AND INDIAN... EDUCATION ASSISTANCE ACT Post-Award Contract Disputes § 900.229 What role will the awarding official play...

2 CFR 901.1010 - Suspending official (Department of Energy supplement to government-wide definition at 2 CFR 180...

Science.gov (United States)

2010-01-01

... DEBARMENT AND SUSPENSION Definitions § 901.1010 Suspending official (Department of Energy supplement to government-wide definition at 2 CFR 180.1010). The suspending official for the Department of Energy... 2 Grants and Agreements 1 2010-01-01 2010-01-01 false Suspending official (Department of Energy...

12 CFR 1700.3 - Official logo and seal.

Science.gov (United States)

2010-01-01

... DEVELOPMENT OFHEO ORGANIZATION AND FUNCTIONS ORGANIZATION AND FUNCTIONS § 1700.3 Official logo and seal. The... of a structure consisting of a solid two-tiered pedestal base topped by a solid triangular shape, which represents the roof of the structure. Placed between the base and the top are the letters “OFHEO...

29 CFR 801.74 - Retention of official record.

Science.gov (United States)

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false Retention of official record. 801.74 Section 801.74 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION, DEPARTMENT OF LABOR OTHER LAWS APPLICATION... part shall be maintained and filed under the custody and control of the Chief Administrative Law Judge. ...

Albania economy toward official euroisation

Directory of Open Access Journals (Sweden)

Erjola BARBULLUSHI

2015-11-01

Full Text Available The euroisation issue in European Integration context, is a continuous process of discussions between different researchers and regulatory institutions. Nowadays, different aspects of collaboration and integration processes between countries in the region, are extended in all politics, economic and security dimensions. In this study, we are going to treat one of the aspects of this process integration for Albania: the possibility of substituting the Albanian Lek with Euro, beginning with the explanation of the concept of euroisation. Also we are going to identify the actual non-official replacement level of lek and how it is expected to be realized in the future. Albania like other developing countries is lack of a currency with which people can buy abroad and which can be used in short-run and long-run credit contracts. On the other hand, the exchange rate represents an important risk, especially for the business which realizes transactions in foreign currency. Here in we are focused on the measurement of the money replacement level in Albania through three main methods. For this purpose is used the regression analysis in order to test the hypothesis under evaluation in two directions: endogenous and exogenous potential factors affecting this replacement. Through the factor analysis identifying the pro and cons of the euroisation phenomenon, we will give the potential alternative in our county economy conditions. Finally, the replacement rate cannot be assessed without being related to the degree of money in circulation replacement and the degree of assets replacement and without being connected with the exchange rate between currencies.

Transportable Emissions Testing Laboratory for Alternative Vehicles Emissions Testing

Energy Technology Data Exchange (ETDEWEB)

Clark, Nigel

2012-01-31

The overall objective of this project was to perform research to quantify and improve the energy efficiency and the exhaust emissions reduction from advanced technology vehicles using clean, renewable and alternative fuels. Advanced vehicle and alternative fuel fleets were to be identified, and selected vehicles characterized for emissions and efficiency. Target vehicles were to include transit buses, school buses, vocational trucks, delivery trucks, and tractor-trailers. Gaseous species measured were to include carbon monoxide, carbon dioxide, oxides of nitrogen, hydrocarbons, and particulate matter. An objective was to characterize particulate matter more deeply than by mass. Accurate characterization of efficiency and emissions was to be accomplished using a state-of-the-art portable emissions measurement system and an accompanying chassis dynamometer available at West Virginia University. These two units, combined, are termed the Transportable Laboratory. An objective was to load the vehicles in a real-world fashion, using coast down data to establish rolling resistance and wind drag, and to apply the coast down data to the dynamometer control. Test schedules created from actual vehicle operation were to be employed, and a specific objective of the research was to assess the effect of choosing a test schedule which the subject vehicle either cannot follow or can substantially outperform. In addition the vehicle loading objective was to be met better with an improved flywheel system.

12 CFR 740.5 - Requirements for the official advertising statement.

Science.gov (United States)

2010-01-01

... official advertising statement, including but not limited to, promotional items such as calendars, matchbooks, pens, pencils, and key chains; (11) Advertisements that contain a statement to the effect that...

7 CFR 54.1017 - Authority to use official identification.

Science.gov (United States)

2010-01-01

... MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) REGULATIONS AND STANDARDS UNDER THE AGRICULTURAL MARKETING ACT OF 1946 AND THE EGG PRODUCTS INSPECTION ACT..., Processing, and Packaging of Livestock and Poultry Products § 54.1017 Authority to use official...

7 CFR 54.1015 - Official reports, forms, and certificates.

Science.gov (United States)

2010-01-01

... MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) REGULATIONS AND STANDARDS UNDER THE AGRICULTURAL MARKETING ACT OF 1946 AND THE EGG PRODUCTS INSPECTION ACT..., Processing, and Packaging of Livestock and Poultry Products § 54.1015 Official reports, forms, and...

7 CFR 53.14 - Financial interest of official grader.

Science.gov (United States)

2010-01-01

... SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) REGULATIONS... (CONTINUED) LIVESTOCK (GRADING, CERTIFICATION, AND STANDARDS) Regulations Service § 53.14 Financial interest... 7 Agriculture 3 2010-01-01 2010-01-01 false Financial interest of official grader. 53.14 Section...

Who Guards the Guards? Understanding Deviance and Corruption of Law Enforcement Officials

Directory of Open Access Journals (Sweden)

Ercan BALCIOĞLU

2015-12-01

Full Text Available Law enforcement officials must be honest in performing both their judicial and administrative responsibilities and duties within the criminal justice system to maintain public tranquility, social trust and order, and securing the justice. There are, however, different kinds phenomena in which several kinds of deviance from acceptable norms of behavior is existing among the law enforcement professionals. Studies dealing with deviance of law enforcement officials have been limited in the Turkish context. This study, first, categorize the kinds of deviant behavior among the law enforcement officials as pointed out by numerous scientific studies. Etiology of these types of behavior, than, is examined based on the existing literature. First of all, as a kind of white collar crime which observing among deviant behavior of police personal will be categorized according to international literature. Finally, this study brings the general consensus on the preventive measures as applied in several countries on law enforcement officials’ deviant behaviors to the attention of the Turkish reader

Evaluasi Kinerja Tarik Traktor Tangan dengan Bahan Bakar Minyak Kelapa Murni

Directory of Open Access Journals (Sweden)

Desrial

2010-04-01

Full Text Available Past research shown that coconut oil can be used directly in Diesel engine by adding a heating element in the fuel delivery system. This study aims to evaluate the performance of a hand tractor pull using pure coconut oil fuel. The Diesel engine of the tractor was equipped with a fuel heater installed on the mufler. Traction performance parameters tested were wheel slippage, drawbar pull, forward speed and drawbar power on the path of concrete and soil. Besides, the tractor was also tested on plowing using a moldboard plow. The test results on the concrete track showed that the maximum drawbar pull was 1.21 kN generated at a speed of 0.92 m/s, with a maximum drawbar power of 1.21 kW at the wheel slip of 10.87%. While the drawbar pull on the soil track was 1.37 kN at a speed of 0.79 m/s, with a maximum value of 0.71 kW drawbar power when wheels slip 22.25%. The results of tillage test showed that field efficiency was 84.66%, which was not much different from the test result using Diesel fuel.

Tobacco use, Alcohol Consumption and Self-rated Oral Health among Nigerian Prison Officials

Directory of Open Access Journals (Sweden)

Clement Chinedu Azodo

2014-01-01

Conclusions: Data from this survey revealed that the majority of the participants rated their oral health as good/excellent. The prevalence of tobacco use and alcohol consumption among prison officials was higher than reported values among the general population in Nigeria. This indicates that more surveillance and intervention studies are needed to evaluate the best way to control tobacco use and alcohol consumption among prison officials in Nigeria.

7 CFR 1900.155 - Designating the processing/servicing official.

Science.gov (United States)

2010-01-01

... 7 Agriculture 12 2010-01-01 2010-01-01 false Designating the processing/servicing official. 1900.155 Section 1900.155 Agriculture Regulations of the Department of Agriculture (Continued) RURAL HOUSING SERVICE, RURAL BUSINESS-COOPERATIVE SERVICE, RURAL UTILITIES SERVICE, AND FARM SERVICE AGENCY...

29 CFR Appendix A to Part 71 - Responsible Officials

Science.gov (United States)

2010-07-01

... address for OSHA's Directorate of Training and Education is 2020 South Arlington Heights Road, Arlington..., Chicago Regional Director, Dallas Regional Director, San Francisco Mine Safety and Health Administration... responsible official in the Mine Safety and Health Administration is: 1100 Wilson Boulevard, Arlington...

28 CFR 29.5 - Notification of law enforcement officials.

Science.gov (United States)

2010-07-01

... 28 Judicial Administration 1 2010-07-01 2010-07-01 false Notification of law enforcement officials. 29.5 Section 29.5 Judicial Administration DEPARTMENT OF JUSTICE MOTOR VEHICLE THEFT PREVENTION ACT... program and with the conditions under which motor vehicles may be stopped. ...

Corruption: Taking into account the psychological mimicry of officials

Science.gov (United States)

Kolesin, Igor; Malafeyev, Oleg; Andreeva, Mariia; Ivanukovich, Georgiy

2017-07-01

A mathematical model of corruption with regard to psychological mimicry in the administrative apparatus with three forms of corruption is constructed. It is assumed that the change of officials forms of corruption is due to situational factors, and anti-corruption laws imply the change of the dominant form. Form's changing is modeled by the system of four differential equations (including groups of corrupt officials), describing the number of groups. The speed of the transition from group to group is expressed through the frequency of meetings. The controlling influence is expressed through the force of anticorruption laws. Two cases are discussed: strictly constant and variable (depending on the scope of one or another form). The equilibrium states that allow to specify the dominant form and investigate its stability, depending on the parameters of the psychological mimicry and rigor of anti-corruption laws are found and discussed.

IAEA, EU Senior Officials Review Nuclear-Related Cooperation, Chart Way Ahead

International Nuclear Information System (INIS)

Amano, Y.

2014-01-01

International Atomic Energy Agency (IAEA) and European Union officials met this week for the second annual Senior Officials Meeting to review and further strengthen their nuclear-related cooperation. In the past year, the two institutions have improved collaboration in nuclear safety, security, safeguards and peaceful use of nuclear energy through implementing a number of initiatives. In 2013, new contracts for projects have been signed amounting to approximately 24 million euros. These included an EU Council decision to support IAEA nuclear security and verification activities worth of 8.05 million euros. Furthermore, a Memorandum of Understanding establishing a framework for cooperation to help improve nuclear safety was signed, as well as the Practical Arrangement on technical nuclear security issues. The EU and the IAEA have also worked to explore and identify new areas for cooperation such as using nuclear applications for socio-economic development. The meeting addressed enhanced cooperation in the areas of nuclear safety, nuclear security, nuclear applications, nuclear energy and safeguards. Participants agreed on the following steps, including holding a Senior Officials Meeting planned in early 2015 in the premises of the European Commission in Luxembourg

Traffic - Special arrangements for the official ceremony on 19th October

CERN Multimedia

Relations with the Host States Service

2004-01-01

The official ceremony marking CERN's fiftieth anniversary will take place on 19th October 2004 in the presence of Member State delegations and observers. Many VIPs are to attend the ceremony, which will be held in the Globe of Science and Innovation and in the adjacent marquee. The arrival and departure of the official delegations and guests will cause some disruption to traffic on and around the Meyrin site: The Route de Meyrin will probably be closed to traffic by the police between 2.00 p.m. and 3.00 p.m. and between 5.00 p.m. and 7.00 p.m. for the arrival and departure of VIPs. Access to the Saint-Genis-Pouilly roundabout will be difficult between 2.00 p.m. and 2.30 p.m., when the new entrance to the Meyrin site will be inaugurated. Use of the following car parks will be prohibited from 16th to 19th October inclusive (Open day and official ceremony; the appropriate road signs will be erected): the car parks located between the two lines on the drawing below (guests will register in a tent set up oppo...

Design and verification of additional filtration for the application of ecological transmission and hydraulic fluids in tractorc

Directory of Open Access Journals (Sweden)

Pavel Máchal

2013-01-01

Full Text Available This contribution presents the design and function verification of additional filtration. It is intended for the common transmission and hydraulic oil filling of tractors. The main role of this filtration concept is to ensure a high level of oil cleanness as a condition for the application of ecologic fluids in tractors. The next one is to decrease the wear of lubricated tractor components, the degradation of oil and eventually to extend the interval of oil change. The designed additional filtering is characterized by ease installation through the use of quick couplings and hoses to the external hydraulic circuit. Therefore, the filtration is suitable for various tractor types. Filter element has been designed with the filter ability 1micron and the ability to separate to 0.5 dm3 of water from oil. Function of additional filtration was verified during the 150 engine hours of tractor operation. During this time period the oil contamination was evaluated on the basis of chemical elements content such as Fe, Cu, Si, Al, Ni, Mo and Cr. The additive concentration was evaluated on the basis of chemical elements content such as Ca, P and Zn. During the test operation of tractor the concentration decrease of chemical elements reached the values 25.53 % (Fe, 23.53 % (Si, 25 % (Al and 5.5 % (Cu. The decrease of additive concentration reached only medium level (6.6 %. Therefore, the designed additional filtration doesn’t remove additives from oil. Based on the evaluation of the content of chemical elements (that representing contamination and additives, we can say that the designed filtering method is suitable for use in agricultural tractors.

[Analysis of Xin'an imperial medical officials in the Ming and Qing Dynasties].

Science.gov (United States)

Wan, S M; Liu, B S; Lu, X

2017-01-28

Xin'an imperial medical officials of the Ming and Qing Dynasties was a special group of Xin'an doctors. It had exerted a positive and active impact on the development of traditional Chinese medicine. Rooted in the Xin'an region, with higher literacy and noble medical ethics and medical knowhow, through the imperial enlistment, examination, and other ways to enter the palace as imperial medical officials. During their tenure, they wrote books and communicated and merged with the folk medicine actively. After retiring, they were still involved actively in folk medicine activities, thus promoting and influencing the development of local medicine. The formation of Xin'an community of imperial medical officials in the Ming and Qing Dynasties was closely related to the prosperity of regional culture and commerce, and the development of medicine in Xin'an region.

The Use of Social Media for Communication In Official Statistics at European Level

OpenAIRE

Ionela-Roxana GLĂVAN; Andreea MIRICĂ; Bogdan Narcis FÎRȚESCU

2016-01-01

Social media tools are wide spread in web communication and are gaining popularity in the communication process between public institutions and citizens. This study conducts an analysis on how social media is used by Official Statistical Institutes to interact with citizens and disseminate information. A linear regression technique is performed to examine which social media platforms (Twitter or Facebook) is a more effective tool in the communication process in the official statistics area. O...

Adaptation of occupants with its environment in the official residence (case study: Housing of TNI AD Gaperta)

Science.gov (United States)

Nirfalini Aulia, Dwira; Aritonang, Cindy

2018-03-01

An official residence is a housing provided by the state and used as a residence occupied by the official duties of officials and civil servants during their service in the city. The property rights of the official residence have limit, only valid while the residents serve in the city. The process of adaptation becomes indispensable because, in the early days of occupying the housing, residents will face a new social environment, which may be different from their previous environment. Furthermore, backgrounds such as economic, cultural, and social factors of each occupant will also determine the adaptation process that occurs. This research aims to find out and analyze adaptation process of the official residence’s dwellers to its environment. This study used the descriptive-qualitative method by interviewing ten occupants who selected by purposive sampling method. Results of research indicated that the most adaptation process occurs adaptation by the reaction such as adding the number of room and service area.

Results of the power-up test of the nuclear-powered ship MUTSU and test programs of her experimental voyages

International Nuclear Information System (INIS)

Ochiai, Masa-aki; Ishida, Toshihisa; Itagaki, Masafumi; Sakamoto, Yukio; Kyouya, Masahiko

1991-01-01

The power-up test of N.S. MUTSU was performed successfully almost on schedule in spite of minor troubles resolved in a short time, and the results of various areas were satisfactory. The official sea trial was well carried out. Then, the ship was officially designated the first nuclear ship in Japan. Experimental voyages are to be performed to yield profitable data for further research on nuclear ships in the future. (author)

Software Testing An ISTQB-ISEB Foundation Guide

CERN Document Server

Hambling, Brian; Morgan, Peter; Samaroo, Angelina; Thompson, Geoff; Williams, Peter

2010-01-01

This practical guide provides insight into software testing, explaining the basics of the testing process and how to perform effective tests. It provides an overview of different techniques and how to apply them. It is the bestselling official textbook of the ISTQB - ISEB Foundation Certificate in Software Testing, updated to the 2010 syllabus.

CWAP Certified Wireless Analysis Professional Official Study Guide Exam PW0-270

CERN Document Server

Westcott, David A; Miller, Ben; Mackenzie, Peter

2011-01-01

The official study guide for the Certified Wireless Analysis Professional certification from CWNPFour leading wireless experts thoroughly prepare you for the vendor-neutral CWAP exam administered by CWNP, the industry leader for enterprise Wi-Fi training and certification.  This official study guide not only covers all exam objectives for the CWAP exam, it also prepares you to administer and troubleshoot complex enterprise WLAN environments.Covers all exam objectives for the Certified Wireless Analysis Professional (CWAP) examCovers 802.11 physical (PHY) and 802.11 MAC layer frame formats and

Qatar Airways Official Partner of China Team At 15th Doha Asian Games 2006

Institute of Scientific and Technical Information of China (English)

无

2006-01-01

@@ Asian Games was held from Dec.1-15 this year in Qatar's capital Doha,which attracted more than 10,500 athletes and team officials from 45 countries competing in 39sports.As Official Airline of the 15th Asian Games,Qatar Airways delivers its award-winning Five Star service to visitors to the Games,whether they are participating or are spectators.

7 CFR 54.2 - Designation of official certificates, memoranda, marks, other identifications, and devices for...

Science.gov (United States)

2010-01-01

...) Official device means any roller, stamp, brand or other device used under the regulations to mark any... the provisions in this part, the terms listed below shall have the respective meanings specified: (a) Official certificate means any form of certification, either written or printed, used under the regulations...

Official control of plant protection products in Poland: detection of illegal products.

Science.gov (United States)

Miszczyk, Marek; Płonka, Marlena; Stobiecki, Tomasz; Kronenbach-Dylong, Dorota; Waleczek, Kazimierz; Weber, Roland

2018-04-03

Market presence of illegal and counterfeit pesticides is now a global problem. According to data published in 2012 by the European Crop Protection Association (ECPA), illegal products represent over 10% of the global market of plant protection products. Financial benefits are the main reason for the prevalence of this practice. Counterfeit and illegal pesticides may contain substances that may pose a threat to the environment, crops, animals, and humans, inconsistent with the label and registration dossier. In Poland, action against illegal and counterfeit plant protection products is undertaken by the Main Inspectorate of Plant Health and Seed Inspection (PIORiN), the police, the prosecution, and the pesticide producers. Results of chemical analyses carried out by the Institute of Plant Protection - National Research Institute Sośnicowice Branch, Pesticide Quality Testing Laboratory (PQTL IPP-NRI Sosnicowice Branch) indicate that a majority of illegal pesticides in Poland are detected in the group of herbicides. Products from parallel trade tend to have the most irregularities. This article describes the official quality control system of plant protection products in Poland and presents the analytical methods for testing pesticides suspected of adulteration and recent test results.

Environmental Assessment, Establishing a Drop Zone at the Energetic Materials Research and Testing Center in Socorro, New Mexico and Finding of No Significant Impact (FONSI)

Science.gov (United States)

2007-11-07

Rustle of leaf 20 dB Whisper 30 dB Normal conversation 60 dB Inside passenger car at 60 MPH 65-75 dB Ringing telephone 80 dB Lawn mower 85-90 dB...shows that the noise would be at a level between a lawn mower and a tractor/bulldozer, which is more than sufficient to wake people at night and to...would be at a level between a lawn mower and a tractor/bulldozer, which is more than sufficient to wake people at night, and to disrupt their

U.S. Naval Academy Officials Did Not Adhere to Contracting and Gift Policies

Science.gov (United States)

2011-11-07

Report No. DODIG-2012-017 November 7, 2011 U.S. Naval Academy Officials Did Not Adhere to Contracting and Gift Policies...Contracting and Gift Policies 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK...HERITAGE AND HISTORY COMMAND SUBJECT: U.S. Naval Academy Officials Did Not Adhere to Contracting and Gift Policies (Report No. DODIG-2012-017) We are

9 CFR 312.3 - Official marks and devices to identify inspected and passed equine products.

Science.gov (United States)

2010-01-01

... inspected and passed equine products. 312.3 Section 312.3 Animals and Animal Products FOOD SAFETY AND... § 312.3 Official marks and devices to identify inspected and passed equine products. (a) The official... § 317.2 of this subchapter to identify inspected and passed mule and other (nonhorse) equine carcasses...

9 CFR 354.210 - Minimum standards for sanitation, facilities, and operating procedures in official plants.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Minimum standards for sanitation, facilities, and operating procedures in official plants. 354.210 Section 354.210 Animals and Animal Products... sanitation, facilities, and operating procedures in official plants. The provisions of §§ 354.210 to 354.247...

32 CFR 37.220 - How involved should the Government program official be in the project?

Science.gov (United States)

2010-07-01

... official be in the project? 37.220 Section 37.220 National Defense Department of Defense OFFICE OF THE... Technology Investment Agreements § 37.220 How involved should the Government program official be in the project? (a) TIAs are used to carry out cooperative relationships between the Federal Government and the...

Official holidays in 2011

CERN Multimedia

HR Department

2011-01-01

(Application of Article R II 4.39 of the Staff Regulations) Official holidays in 2011 (in addition to the special leave during the annual closure): Saturday 1 January\t(New Year) Friday 22 April\t(Good Friday) Monday 25 April\t(Easter Monday) Sunday 1 May Thursday 2 June\t(Ascension day) Friday 3 June\t(compensation granted for 1 May) Monday 13 June\t(Whit Monday) Thursday 8 September\t(“Jeûne genevois”)  Thursday 22 December\t(compensation granted for 24 December, Christmas Eve) Friday 23 December\t(compensation granted for 25 December, Christmas) Saturday 24 December\t(Christmas Eve) Sunday 25 December\t(Christmas) Thursday 29 December\t(compensation granted for 31 December, New Year’s Eve) Friday 30 December\t(compensation granted for 1 January 2012, New Year) Saturday 31 December\t(New Year’s Eve) Tel. 73903

AWS certified solutions architect official study guide associate exam

CERN Document Server

Baron, Joe; Bixler, Tim; Gaut, Biff; Kelly, Kevin E; Senior, Sean; Stamper, John

2017-01-01

This is your opportunity to take the next step in your career by expanding and validating your skills on the AWS cloud. AWS has been the frontrunner in cloud computing products and services, and the AWS Certified Solutions Architect Official Study Guide for the Associate exam will get you fully prepared through expert content, and real-world knowledge, key exam essentials, chapter review questions, access to Sybex's interactive online learning environment, and much more. This official study guide, written by AWS experts, covers exam concepts, and provides key review on exam topics, including: * Mapping Multi-Tier Architectures to AWS Services, such as web/app servers, firewalls, caches and load balancers * Understanding managed RDBMS through AWS RDS (MySQL, Oracle, SQL Server, Postgres, Aurora) * Understanding Loose Coupling and Stateless Systems * Comparing Different Consistency Models in AWS Services * Understanding how AWS CloudFront can make your application more cost efficient, faster and secure * Implem...

Changing Occupational Roles in Audit Society—The Case of Swedish Student Aid Officials

Directory of Open Access Journals (Sweden)

Anders Bruhn

2015-03-01

Full Text Available This article is about occupational change concerning a non-professional group of Street Level Bureaucrats—student aid officials at the Swedish Board for Study Support (SBSS. The aim is to describe and analyze changes in their occupational role—their discretional space and working conditions under the impact of changed ways to manage public service organizations and new information and communication technology. The SBSS is the sole administrator of student financial aid in Sweden. Its officials investigate and take decisions about students’ applications and repayment of loans. This work includes interacting with clients via telephone and computer. These officials have to have a certain amount of discretion to interpret and apply rules and regulations on specific circumstances in individual cases. How are their working conditions affected by organizational and policy changes in the authority? How is their ability to exercise influence and control over their own work performance affected? The analysis highlights how officials suffer from decreased discretion and an increasing routinization in their work. This is a result of a regulatory framework continuously growing in detail together with increasing management control based on new information and communication technology. What remains of discretion is a kind of ‘task’ discretion, the ability to do minor technical manipulations of rules in individual cases. Even today’s top management seems critical of this development. Besides further automatization and reduction of staff an ongoing process of organizational change is therefore also aiming to develop officials’ competence and working conditions toward what may be seen as organizational professionalism, a development of specific occupational skills and a discretion adjusted and subordinated to managerial means and ends. The analysis rests on data from a research project (2011 to 2014 about Institutional Talk. Data sources are

2 CFR 901.930 - Debarring official (Department of Energy supplement to government-wide definition at 2 CFR 180.930).

Science.gov (United States)

2010-01-01

... DEBARMENT AND SUSPENSION Definitions § 901.930 Debarring official (Department of Energy supplement to government-wide definition at 2 CFR 180.930). The Debarring Official for the Department of Energy, exclusive... 2 Grants and Agreements 1 2010-01-01 2010-01-01 false Debarring official (Department of Energy...

Public health officials and MECs should be held liable for harm ...

African Journals Online (AJOL)

Public health officials and MECs should be held liable for harm caused to patients through incompetence, indifference, maladministration or negligence regarding the availability of hospital equipment.

Professional risk of developing diseases of the peripheral nervous system in tractor drivers – machine operators of agricultural production

Directory of Open Access Journals (Sweden)

G.A. Bezrukova

2015-09-01

Full Text Available Based on the results of the hygienic assessment of working conditions in the domestic agricultural machinery of old and new models when performing the main types of seasonal agricultural work during the annual production cycle and analysis of accumulated occupational diseases’ nosology structure in agricultural workers of the Saratov region over the period from 2004 to 2014, the estimation of professional risk diseases of the peripheral nervous system in tractor drivers – machine operators of agricultural production is given. Professional risk assessment carried out under the procedure set forth in P2.2.1766-03 has shown that the category of a priori risk to their health during an annual production cycle ranged from high to very high (unbearable. It was revealed that the most important factors shaping the harmful working conditions when working on agricultural machinery that can act as a trigger in the formation of vertebral diseases of the peripheral nervous system, are general and local vibration, adverse micro-climatic conditions, long uncomfortable static working posture and physical stress. The risk of diseases in the peripheral uneven system in machine operators of agriculture was attributed to the high risk category with an index of professional diseases (IPD equal to 0,5 %.

Softball Guide with Official Rules. January 1972 - January 1974.

Science.gov (United States)

Claussen, Connie, Ed.

This guide, published by the Division for Girls and Women's Sports (DGWS) of the American Association for Health, Physical Education, and Recreation (AAHPER) presents a statement of DGWS beliefs, standards in sports, sources of information and international committee rules. It details various affiliated boards of officials and presents the…

Mother tongue education in the official minority languages in ...

African Journals Online (AJOL)

The government of Zimbabwe officially declared that with effect from January 2002, it was to implement the use and teaching of the officia minority languages, namely Venda, Tonga, Nambya, Kalanga, Sotho and Shangani, as the media of instruction and subjects in primary schools in areas where they are spoken.

27 CFR 4.51 - Exhibiting certificates to Government officials.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Exhibiting certificates to Government officials. 4.51 Section 4.51 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS LABELING AND ADVERTISING OF WINE Requirements for...

Officially released mutant varieties - the FAO/IAEA Database

International Nuclear Information System (INIS)

Maluszynski, M.; Nichterlein, K.; Zanten, L. van; Ahloowalia, B.S.

2000-01-01

In the approximately 70 year-old history of induced mutations, there are many examples on the development of new and valuable alteration in plant characters significantly contributing to increased yield potential of specific crops. However, knowledge on the success of induced mutations in crop improvement among geneticists and breeders is usually limited to species of their interest. The present paper contains a comprehensive list of officially released mutant varieties, based on information from plant breeders. The number of mutant varieties officially released and recorded in the FAO/IAEA Mutant Varieties Database before the end of 2000 is 2,252. Almost half of these varieties have been released during the last 15 years. Considering a significant delay in the dissemination of information on newly released varieties and difficulties in the collection of such data, there has been a renaissance in the use of mutation techniques in crop improvement. At the demand of geneticists, plant breeders, and more recently molecular geneticists, for information on released mutant varieties of specific crops, the MVD was transferred to the web site of the FAO/IAEA Joint Division. The MVD will be available on our web pages early in 2001. (author)

Study and implementation of foreign experience of professional competence increase of governing bodies officials in Ukraine

Directory of Open Access Journals (Sweden)

O. I. Cherchatyi

2014-06-01

The authors accentuate, that the professional competence increase of governing bodies officials and officials of local self-government should be organized in the accordance with principles of system and practical directivity in the conditions of wide innovative technologies use, corresponding to up-to-datedness.

Codetermination in case of official directive denied

International Nuclear Information System (INIS)

Ziegler, E.

1989-01-01

The contribution deals with a recent decision by the Federal Labour Court, concerning the right of codetermination of the works council in matters of security of nuclear installations and decisions taken in this field by an official directive. Codetermination, the Court decided, requires a right of determination by the employer alone, and in cases where this right is restricted by the law due to powers of a government authority, there is no right of codetermination of the works council. (orig.) [de

AN ASSESSMENT OF THE NEED OF POLICE OFFICIALS FOR TRAUMA INTERVENTION PROGRAMMES – A QUALITATIVE APPROACH

Directory of Open Access Journals (Sweden)

Strydom, Herman

2015-09-01

Full Text Available lOfficials in the South African Police Service (SAPS are exposed to multiple traumatic incidents. The effect of such exposure is aggravated by various contributing factors that may cause intense trauma for the individual, family members and the police service. The risk factors include post-traumatic stress, acute stress, depression, alcohol abuse, suicide and impaired productivity. It is therefore important that officials have direct access to support. The efficacy of the present trauma intervention programmes in the SAPS is questioned, because despite their implementation police officials still present high levels of acute and behavioural problems

21 CFR 1309.26 - Exemption of law enforcement officials.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 9 2010-04-01 2010-04-01 false Exemption of law enforcement officials. 1309.26 Section 1309.26 Food and Drugs DRUG ENFORCEMENT ADMINISTRATION, DEPARTMENT OF JUSTICE REGISTRATION OF MANUFACTURERS, DISTRIBUTORS, IMPORTERS AND EXPORTERS OF LIST I CHEMICALS Requirements for Registration § 1309.26 Exemption of law enforcement...

21 CFR 1301.24 - Exemption of law enforcement officials.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 9 2010-04-01 2010-04-01 false Exemption of law enforcement officials. 1301.24 Section 1301.24 Food and Drugs DRUG ENFORCEMENT ADMINISTRATION, DEPARTMENT OF JUSTICE REGISTRATION OF MANUFACTURERS, DISTRIBUTORS, AND DISPENSERS OF CONTROLLED SUBSTANCES Exceptions to Registration and Fees § 1301.24 Exemption of law enforcement...

14 CFR 1261.403 - Consultation with appropriate officials; negotiation.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Consultation with appropriate officials; negotiation. 1261.403 Section 1261.403 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION PROCESSING OF MONETARY CLAIMS (GENERAL) Collection of Civil Claims of the United States Arising Out of the Activities of the National Aeronautic...

Sport coaching officials and their stressors: Work overload, role ...

African Journals Online (AJOL)

Sport officials' concerns over job stressors have become common due to the adverse effect on health. The study sought to examine the associations of work overload, role ambiguity and role conflict, as well as their predictive influence on job satisfaction of sport coaches in Gauteng, South Africa. Data were collected from a ...

A Teaching Method on Basic Chemistry for Freshman (II) : Teaching Method with Pre-test and Post-test

OpenAIRE

立木, 次郎; 武井, 庚二

2004-01-01

This report deals with review of a teaching method on basic chemistry for freshman in this first semester. We tried to review this teaching method with pre-test and post-test by means of the official and private questionnaires. Several hints and thoughts on teaching skills are obtained from this analysis.

Energetic evaluation and performance of broilers in an aviary with a gas and burning wood1 automatic heating system

OpenAIRE

Sandro Ricardo Funck

2006-01-01

This work had as objective the assembly of a system automated for evaluation of the consumption of fuel in agricultural tractors, in the utilization of biodiesel in diverse mixtures diesel/biodiesel for the accomplishment of testing, without the utilization of the tank of the tractor. The system was projected and mounted on the UNIOESTE Cascavel - PR in partnership with the UTFPR Medianeira â PR. The system is composed for two auxiliary tanks confectioned in stainless steel ...

THE AZERBAIJANI OFFICIAL State DISCOURSE ON THE ARMENIANAZERBAIjANI CONFLICT: BLOCKAGES TO PEACE

Directory of Open Access Journals (Sweden)

Lavinia BADULESCU

2018-05-01

Full Text Available The intractable conflict between Armenia and Azerbaijan, the first in a series of inter-ethnic wars to arise in the final years of the Soviet Union, has lasted for three decades and has gone through several violent episodes inflicting widespread death and destruction. Against the background of a long period of tried-and-failed resolution attempts, the conflict has led to the fostering of grievances, prejudice, long-lasting societal trauma and victimhood. Starting from these considerations, this paper seeks to emphasize the way in which, in the official state discourse, the Azerbaijani leaders concentrate mainly on their own traumas and victim status. This type of discourse sets off a unilateral solution to the conflict, considered the only right option, thus preventing any dialogue with the Armenian side, and implicitly any resolution of the conflict. From a methodological perspective, I have selected several official speeches belonging to the Azerbaijani leaders between 1994-2016 and held at various national and international forums. The content analysis of the Azerbaijani official speeches will be complemented by the data collected through semi-structured interviews with Azerbaijani experts in the field of International Relations during a field research to Azerbaijan. The paper concludes that trauma and victimhood as reflected in the official Azerbaijani state discourse function as blockages to peace and hinder any changes in the way Azerbaijani leaders represent the conflict and its resolution.

18 CFR 3c.3 - Reporting fraud, waste, abuse, and corruption and cooperation with official inquiries.

Science.gov (United States)

2010-04-01

..., abuse, and corruption and cooperation with official inquiries. 3c.3 Section 3c.3 Conservation of Power... OF CONDUCT § 3c.3 Reporting fraud, waste, abuse, and corruption and cooperation with official..., abuse, and corruption in Commission programs, including on the part of Commission employees, contractors...

45 CFR 630.400 - What are my responsibilities as a(n) National Science Foundation awarding official?

Science.gov (United States)

2010-10-01

....400 What are my responsibilities as a(n) National Science Foundation awarding official? As a(n... 45 Public Welfare 3 2010-10-01 2010-10-01 false What are my responsibilities as a(n) National Science Foundation awarding official? 630.400 Section 630.400 Public Welfare Regulations Relating to...

Per Diems in Polio Eradication: Perspectives From Community Health Workers and Officials.

Science.gov (United States)

Closser, Svea; Rosenthal, Anat; Justice, Judith; Maes, Kenneth; Sultan, Marium; Banerji, Sarah; Amaha, Hailom Banteyerga; Gopinath, Ranjani; Omidian, Patricia; Nyirazinyoye, Laetitia

2017-09-01

Nearly all global health initiatives give per diems to community health workers (CHWs) in poor countries for short-term work on disease-specific programs. We interviewed CHWs, supervisors, and high-level officials (n = 95) in 6 study sites across sub-Saharan Africa and South Asia in early 2012 about the per diems given to them by the Global Polio Eradication Initiative. These per diems for CHWs ranged from $1.50 to $2.40 per day. International officials defended per diems for CHWs with an array of arguments, primarily that they were necessary to defray the expenses that workers incurred during campaigns. But high-level ministry of health officials in many countries were concerned that even small per diems were unsustainable. By contrast, CHWs saw per diems as a wage; the very small size of this wage led many to describe per diems as unjust. Per diem polio work existed in the larger context of limited and mostly exploitative options for female labor. Taking the perspectives of CHWs seriously would shift the international conversation about per diems toward questions of labor rights and justice in global health pay structures.

Benefit and Risk Perceptions of Controversial Facilities: A Comparison between Local Officials and the Public in China

Directory of Open Access Journals (Sweden)

Qingduo Mao

2018-04-01

Full Text Available This article investigates the perception biases of local government officials and the general public by comparing their benefit and risk perceptions towards controversial facilities. The analysis framework of Social Judgement Theory (SJT—i.e., (a economic benefits, (b environmental health, and (c social and political factors—was used to design the research. SJT is a widely recognized theoretical framework that includes experimental approaches to the study of cognitive conflicts. An experimental survey was conducted to collect data in order to make a comparison of the weight of different elements. Results demonstrate that there are perception differences between the general public and local officials on controversial facilities. Local officials responsible for endorsing and supervising plants attach more significance to environmental factors than the public, while the public focuses more on social and political factors than officials. There is no significant difference in the cognition of economic benefits. Factors such as demolition compensation and legitimacy may provoke these perception gaps. This paper enriches the current understanding of SJT and policy making for controversial facilities by investigating the perception gaps between officials and the general public.

40 CFR 205.57-3 - Test vehicle preparation.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Test vehicle preparation. 205.57-3... PROGRAMS TRANSPORTATION EQUIPMENT NOISE EMISSION CONTROLS Medium and Heavy Trucks § 205.57-3 Test vehicle preparation. (a) Prior to the official test, the test vehicle selected in accordance with § 205-57-2 shall not...

KOP ion exchange plant officially opened

International Nuclear Information System (INIS)

Anon.

1982-01-01

The KOP ion exchange plant, which was officially opened in February 1982, can be seen as an important milestone in the history of Klipfontein Organic Products. The plant, erected at a cost of R7 million, has enabled South Africa to achieve virtual self-sufficiency as far as resins are concerned. It will produce R5 million worth of resins per annum, and it has been estimated that it will save the country R3 million per annum in foreign exchange. The plant is the only of its kind in Africa, and will be able to meet 98% of the ion exchange resin requirements of the Republic

15 CFR 25.5 - Review by the reviewing official.

Science.gov (United States)

2010-01-01

... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Review by the reviewing official. 25.5 Section 25.5 Commerce and Foreign Trade Office of the Secretary of Commerce PROGRAM Fraud Civil Remedies... value of property, services, or other benefits, requested or demanded in violation of § 25.3 of this...

Get all the official CERN holidays automatically added to your CERN mailbox calendar

CERN Multimedia

CERN Mail Services

2013-01-01

A new tool has been created that makes it easy to check the official CERN holidays. These holidays will appear automatically in your calendar. Currently, to check the official CERN holidays, you had to consult either the CERN website or EDH. Now you can see these holidays in your CERN calendar together with absences, meetings and other events. To take advantage of this feature: add yourself as member of the e-group “holidays-to-calendar” here. You can also use this link. Your calendar will be updated the very next day.

Repeated sprint ability and stride kinematics are altered following an official match in national-level basketball players.

Science.gov (United States)

Delextrat, A; Baliqi, F; Clarke, N

2013-04-01

The aim of the study was to investigate the effects of playing an official national-level basketball match on repeated sprint ability (RSA) and stride kinematics. Nine male starting basketball players (22.8±2.2 years old, 191.3±5.8 cm, 88±10.3 kg, 12.3±4.6% body fat) volunteered to take part. Six repetitions of maximal 4-s sprints were performed on a non-motorised treadmill, separated by 21-s of passive recovery, before and immediately after playing an official match. Fluid loss, playing time, and the frequencies of the main match activities were recorded. The peak, mean, and performance decrement for average and maximal speed, acceleration, power, vertical and horizontal forces, and stride parameters were calculated over the six sprints. Differences between pre- and post-match were assessed by student t-tests. Significant differences between pre- and post-tests were observed in mean speed (-3.3%), peak and mean horizontal forces (-4.3% and -17.4%), peak and mean vertical forces (-3.4% and -3.7%), contact time (+7.3%), stride duration (+4.6%) and stride frequency (-4.0%), (Pvertical force were significantly correlated to fluid loss and sprint, jump and shuffle frequencies (P<0.05). These results highlight that the impairment in repeated sprint ability depends on the specific activities performed, and that replacing fluid loss through sweating during a match is crucial.

14 CFR 193.15 - What FAA officials exercise the authority of the Administrator under this part?

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false What FAA officials exercise the authority of the Administrator under this part? 193.15 Section 193.15 Aeronautics and Space FEDERAL AVIATION... SUBMITTED INFORMATION § 193.15 What FAA officials exercise the authority of the Administrator under this...

Towards enhanced public access to legal information : A proposal for official networked one-stop legal information websites

NARCIS (Netherlands)

Mitee, Leesi Ebenezer

2018-01-01

Abstract: This article identifies the publishing of fragments of legal information on multiple, isolated official legal information websites (OLIWs) as the major factor underlying the existing problems in locating the available official online legal information of all levels of government (national,