Integrated Wind Power Planning Tool

DEFF Research Database (Denmark)

Rosgaard, M. H.; Giebel, Gregor; Nielsen, T. S.

2012-01-01

model to be developed in collaboration with ENFOR A/S; a danish company that specialises in forecasting and optimisation for the energy sector. This integrated prediction model will allow for the description of the expected variability in wind power production in the coming hours to days, accounting......This poster presents the current state of the public service obligation (PSO) funded project PSO 10464, with the working title "Integrated Wind Power Planning Tool". The project commenced October 1, 2011, and the goal is to integrate a numerical weather prediction (NWP) model with purely...

Computer- Aided Design in Power Engineering Application of Software Tools

CERN Document Server

Stojkovic, Zlatan

2012-01-01

This textbooks demonstrates the application of software tools in solving a series of problems from the field of designing power system structures and systems. It contains four chapters: The first chapter leads the reader through all the phases necessary in the procedures of computer aided modeling and simulation. It guides through the complex problems presenting on the basis of eleven original examples. The second chapter presents  application of software tools in power system calculations of power systems equipment design. Several design example calculations are carried out using engineering standards like MATLAB, EMTP/ATP, Excel & Access, AutoCAD and Simulink. The third chapters focuses on the graphical documentation using a collection of software tools (AutoCAD, EPLAN, SIMARIS SIVACON, SIMARIS DESIGN) which enable the complete automation of the development of graphical documentation of a power systems. In the fourth chapter, the application of software tools in the project management in power systems ...

Computational tool for simulation of power and refrigeration cycles

Science.gov (United States)

Córdoba Tuta, E.; Reyes Orozco, M.

2016-07-01

Small improvement in thermal efficiency of power cycles brings huge cost savings in the production of electricity, for that reason have a tool for simulation of power cycles allows modeling the optimal changes for a best performance. There is also a big boom in research Organic Rankine Cycle (ORC), which aims to get electricity at low power through cogeneration, in which the working fluid is usually a refrigerant. A tool to design the elements of an ORC cycle and the selection of the working fluid would be helpful, because sources of heat from cogeneration are very different and in each case would be a custom design. In this work the development of a multiplatform software for the simulation of power cycles and refrigeration, which was implemented in the C ++ language and includes a graphical interface which was developed using multiplatform environment Qt and runs on operating systems Windows and Linux. The tool allows the design of custom power cycles, selection the type of fluid (thermodynamic properties are calculated through CoolProp library), calculate the plant efficiency, identify the fractions of flow in each branch and finally generates a report very educational in pdf format via the LaTeX tool.

Optimal offering and allocation policies for wind power in energy and reserve markets

DEFF Research Database (Denmark)

Soares, Tiago; Jensen, Tue Vissing; Mazzi, Nicolo

2017-01-01

Cormick relaxation and piecewise linear decision rules are adapted and tested aiming to maximize the expected revenue for participating in both energy and reserve markets, while accounting for estimated balancing costs for failing to provide energy and reserve. A set of numerical examples, as well as a case study......Proliferation of wind power generation is increasingly making this power source an important asset in designs of energy and reserve markets. Intuitively, wind power producers will require the development of new offering strategies that maximize the expected profit in both energy and reserve markets...... of better forecast information from the different day-ahead and balancing stages, allowing different shares of energy and reserve in both stages. Under these assumptions, different mathematical methods able to deal with the uncertain nature of wind power generation, namely, stochastic programming, with Mc...

Radiation Mitigation and Power Optimization Design Tools for Reconfigurable Hardware in Orbit

Science.gov (United States)

French, Matthew; Graham, Paul; Wirthlin, Michael; Wang, Li; Larchev, Gregory

2005-01-01

The Reconfigurable Hardware in Orbit (RHinO)project is focused on creating a set of design tools that facilitate and automate design techniques for reconfigurable computing in space, using SRAM-based field-programmable-gate-array (FPGA) technology. In the second year of the project, design tools that leverage an established FPGA design environment have been created to visualize and analyze an FPGA circuit for radiation weaknesses and power inefficiencies. For radiation, a single event Upset (SEU) emulator, persistence analysis tool, and a half-latch removal tool for Xilinx/Virtex-II devices have been created. Research is underway on a persistence mitigation tool and multiple bit upsets (MBU) studies. For power, synthesis level dynamic power visualization and analysis tools have been completed. Power optimization tools are under development and preliminary test results are positive.

Hubble Space Telescope EVA Power Ratchet Tool redesign

Science.gov (United States)

Richards, Paul W.; Park, Chan; Brown, Lee

The Power Ratchet Tool (PRT) is a self contained, power-driven, 3/8 inch drive ratchet wrench which will be used by astronauts during Extravehicular Activities (EVA). This battery-powered tool is controlled by a dedicated electonic controller. The PRT was flown during the Hubble Space Telescope (HST) Deployment Mission STS-31 to deploy the solar arrays if the automatic mechanisms failed. The PRT is currently intended for use during the first HST Servicing Mission STS-61 as a general purpose power tool. The PRT consists of three major components; the wrench, the controller, and the battery module. Fourteen discrete combinations of torque, turns, and speed may be programmed into the controller before the EVA. The crewmember selects the desired parameter profile by a switch mounted on the controller. The tool may also be used in the manual mode as a non-powered ratchet wrench. The power is provided by a silver-zinc battery module, which fits into the controller and is replaceable during an EVA. The original PRT did not meet the design specification of torque output and hours of operation. To increase efficiency and reliability the PRT underwent a redesign effort. The majority of this effort focused on the wrench. The original PRT drive train consisted of a low torque, high speed brushless DC motor, a face gear set, and a planocentric gear assembly. The total gear reduction was 300:1. The new PRT wrench consists of a low speed, high torque brushless DC motor, two planetary gear sets and a bevel gear set. The total gear reduction is now 75:1. A spline clutch has also been added to disengage the drive train in the manual mode. The design changes to the controller will consist of only those modifications necessary to accomodate the redesigned wrench.

New tool for integration of wind power forecasting into power system operation

DEFF Research Database (Denmark)

Gubina, Andrej F.; Keane, Andrew; Meibom, Peter

2009-01-01

The paper describes the methodology that has been developed for transmission system operators (TSOs) of Republic of Ireland, Eirgrid, and Northern Ireland, SONI the TSO in Northern Ireland, to study the effects of advanced wind power forecasting on optimal short-term power system scheduling....... The resulting schedules take into account the electricity market conditions and feature optimal reserve scheduling. The short-term wind power prediction is provided by the Anemos tool, and the scheduling function, including the reserve optimisation, by the Wilmar tool. The proposed methodology allows...... for evaluation of the impacts that different types of wind energy forecasts (stochastic vs. deterministic vs. perfect) have on the schedules, and how the new incoming information via in-day scheduling impacts the quality of the schedules. Within the methodology, metrics to assess the quality of the schedules...

Crowd Sourcing for Conservation: Web 2.0 a Powerful Tool for Biologists

Directory of Open Access Journals (Sweden)

William E. Boyd

2012-05-01

Full Text Available The advent and adoption of Web 2.0 technologies offers a powerful approach to enhancing the capture of information in natural resource ecology, notably community knowledge of species distributions. Such information has previously been collected using, for example, postal surveys; these are typically inefficient, with low response rates, high costs, and requiring respondents to be spatially literate. Here we describe an example, using the Google Maps Application Programming Interface, to discuss the opportunities such tools provide to conservation biology. Toad Tracker was created as a prototype to demonstrate the utility of this technology to document the distribution of an invasive vertebrate pest species, the cane toad, within Australia. While the technological aspects of this tool are satisfactory, manager resistance towards its use raises issues around the public nature of the technology, the collaborative (non-expert role in data collection, and data ownership. We conclude in suggesting that, for such tools to be accepted by non-innovation adopters, work is required on both the technological aspects and, importantly, a cultural change is required to create an environment of acceptance of the shifting relationship between authority, expertise and knowledge.

Net energy analysis - powerful tool for selecting elective power options

Energy Technology Data Exchange (ETDEWEB)

Baron, S. [Brookhaven National Laboratory, Upton, NY (United States)

1995-12-01

A number of net energy analysis studies have been conducted in recent years for electric power production from coal, oil and uranium fuels; synthetic fuels from coal and oil shale; and heat and electric power from solar energy. This technique is an excellent indicator of investment costs, environmental impact and potential economic competitiveness of alternative electric power systems for energy planners from the Eastern European countries considering future options. Energy conservation is also important to energy planners and the net energy analysis technique is an excellent accounting system on the extent of energy resource conservation. The author proposes to discuss the technique and to present the results of his studies and others in the field. The information supplied to the attendees will serve as a powerful tool to the energy planners considering their electric power options in the future.

Selecting a Web 2.0 Presentation Tool

Science.gov (United States)

Hodges, Charles B.; Clark, Kenneth

2011-01-01

Web-based presentation tools are sometimes referred to as "next generation presentation tools" (EDUCAUSE, 2010). At the most basic level, these tools are simply online versions of traditional presentation software, such as Microsoft's PowerPoint or Apple's Keynote, but some services offer features like web-based collaboration, online presentation…

Synchrotron light sources: A powerful tool for science and technology

International Nuclear Information System (INIS)

Schlachter, F.; Robinson, A.

1996-01-01

A new generation of synchrotron light sources is producing extremely bright beams of vacuum-ultraviolet and x-ray radiation, powerful new tools for research in a wide variety of basic and applied sciences. Spectromicroscopy using high spectral and spatial resolution is a new way of seeing, offering many opportunities in the study of matter. Development of a new light source provides the country or region of the world in which the light source is located many new opportunities: a focal point for research in many scientific and technological areas, a means of upgrading the technology infrastructure of the country, a means of training students, and a potential service to industry. A light source for Southeast Asia would thus be a major resource for many years. Scientists and engineers from light sources around the world look forward to providing assistance to make this a reality in Southeast Asia

Digital Portfolios: Powerful Marketing Tool for Communications Students

Science.gov (United States)

Nikirk, Martin

2008-01-01

A digital portfolio is a powerful marketing tool for young people searching for employment in the communication or interactive media fields. With a digital portfolio, students can demonstrate their skills at working with software tools, demonstrate appropriate use of materials, explain technical procedures, show an understanding of processes and…

Artificial intelligence tool development and applications to nuclear power

International Nuclear Information System (INIS)

Naser, J.A.

1987-01-01

Two parallel efforts are being performed at the Electric Power Research Institute (EPRI) to help the electric utility industry take advantage of the expert system technology. The first effort is the development of expert system building tools, which are tailored to electric utility industry applications. The second effort is the development of expert system applications. These two efforts complement each other. The application development tests the tools and identifies additional tool capabilities that are required. The tool development helps define the applications that can be successfully developed. Artificial intelligence, as demonstrated by the developments described is being established as a credible technological tool for the electric utility industry. The challenge to transferring artificial intelligence technology and an understanding of its potential to the electric utility industry is to gain an understanding of the problems that reduce power plant performance and identify which can be successfully addressed using artificial intelligence

Multi-Mission Power Analysis Tool (MMPAT) Version 3

Science.gov (United States)

Wood, Eric G.; Chang, George W.; Chen, Fannie C.

2012-01-01

The Multi-Mission Power Analysis Tool (MMPAT) simulates a spacecraft power subsystem including the power source (solar array and/or radioisotope thermoelectric generator), bus-voltage control, secondary battery (lithium-ion or nickel-hydrogen), thermostatic heaters, and power-consuming equipment. It handles multiple mission types including heliocentric orbiters, planetary orbiters, and surface operations. Being parametrically driven along with its user-programmable features can reduce or even eliminate any need for software modifications when configuring it for a particular spacecraft. It provides multiple levels of fidelity, thereby fulfilling the vast majority of a project s power simulation needs throughout the lifecycle. It can operate in a stand-alone mode with a graphical user interface, in batch mode, or as a library linked with other tools. This software can simulate all major aspects of a spacecraft power subsystem. It is parametrically driven to reduce or eliminate the need for a programmer. Added flexibility is provided through user-designed state models and table-driven parameters. MMPAT is designed to be used by a variety of users, such as power subsystem engineers for sizing power subsystem components; mission planners for adjusting mission scenarios using power profiles generated by the model; system engineers for performing system- level trade studies using the results of the model during the early design phases of a spacecraft; and operations personnel for high-fidelity modeling of the essential power aspect of the planning picture.

City of Camden, New Jersey Program offering widespread energy recovery (power): Final report

Energy Technology Data Exchange (ETDEWEB)

Witkowski, Stanley [City of Camden, NJ (United States). Dept. of Development and Planning Bureau of Housing Services

2013-12-31

The Camden Residential POWER Program, Program Offering Widespread Energy Recovery, is a program designed to benefit Camden homeowners, stabilize neighborhoods and put local contractors to work. Camden POWER granted up to $18,600 to fund energy efficient home improvements and necessary life/safety rehabilitation repairs. The program was designed as a self-sustaining, neighborhood approach to bringing long-term energy and financial savings to the community. Valuable home upgrades were completed, including high-efficiency furnaces, hot water heaters, insulation, insulated roofs and blower door guided air-sealing. The goal of all improvements were to reduce energy consumption, lower utility bills, improve property values and promote neighborhood stabilization.

User-friendly tool for power flow analysis and distributed generation ...

African Journals Online (AJOL)

The intent of power distribution companies (DISCOs) is to deliver electric power to their ... One major way to minimise power loss on a given power system is to install ... The accuracy and reliability of the developed tool was validated using ...

Impact of Asian Soft Power in Latin America - China and South Korea as Emerging Powers in the Subcontinent

OpenAIRE

Milanowitsch, Bianca Katharina; Derichs, Claudia (Prof. Dr.)

2018-01-01

Has the use of soft power as a strategic foreign policy tool enabled China and South Korea to position themselves as emerging powers in Latin America? This study operationalizes and conceptualizes the concept of soft power by measuring it through specific categories within a case study and offers an extended definition of emerging powers. The concept of soft power has been defined by IR theory as a tool only available to hegemonic or strong powers, which has perpetuated an inherent western bi...

Financial tools to induce cooperation in power asymmetrical water systems

Science.gov (United States)

Denaro, Simona; Castelletti, Andrea; Giuliani, Matteo; Characklis, Gregory W.

2017-04-01

irrespective of the timing of downstream users, i.e., farmers, demands. This situation can lead to financial losses by the farmers, an already disadvantaged group, and, as demonstrated by previous work, lead the global system to underperform. Results suggest that financial hedging tools may offer a reliable and relatively inexpensive alternative to other forms of compensation, and thereby favor more equitable management of multi-purpose water systems characterized by power asymmetry. This finding is especially relevant in times where granting of licenses to use/withdrawal water are often being reviewed with attention to environmental protection and social justice issues.

Development and content validation of the power mobility training tool.

Science.gov (United States)

Kenyon, Lisa K; Farris, John P; Cain, Brett; King, Emily; VandenBerg, Ashley

2018-01-01

This paper outlines the development and content validation of the power mobility training tool (PMTT), an observational tool designed to assist therapists in developing power mobility training programs for children who have multiple, severe impairments. Initial items on the PMTT were developed based on a literature review and in consultation with therapists experienced in the use of power mobility. Items were trialled in clinical settings, reviewed, and refined. Items were then operationalized and an administration manual detailing scoring for each item was created. Qualitative and quantitative methods were used to establish content validity via a 15 member, international expert panel. The content validity ratio (CVR) was determined for each possible item. Of the 19 original items, 10 achieved minimum required CVR values and were included in the final version of the PMTT. Items related to manoeuvring a power mobility device were merged and an item related to the number of switches used concurrently to operate a power mobility device were added to the PMTT. The PMTT may assist therapists in developing training programs that facilitate the acquisition of beginning power mobility skills in children who have multiple, severe impairments. Implications for Rehabilitation The Power Mobility Training Tool (PMTT) was developed to help guide the development of power mobility intervention programs for children who have multiple, severe impairments. The PMTT can be used with children who access a power mobility device using either a joystick or a switch. Therapists who have limited experience with power mobility may find the PMTT to be helpful in setting up and conducting power mobility training interventions as a feasible aspect of a plan of care for children who have multiple, severe impairments.

Dynamic wind turbine models in power system simulation tool

DEFF Research Database (Denmark)

Hansen, A.; Jauch, Clemens; Soerensen, P.

The present report describes the dynamic wind turbine models implemented in the power system simulation tool DIgSILENT. The developed models are a part of the results of a national research project, whose overall objective is to create a model database in different simulation tools. The report...

PC Software graphics tool for conceptual design of space/planetary electrical power systems

Science.gov (United States)

Truong, Long V.

1995-01-01

This paper describes the Decision Support System (DSS), a personal computer software graphics tool for designing conceptual space and/or planetary electrical power systems. By using the DSS, users can obtain desirable system design and operating parameters, such as system weight, electrical distribution efficiency, and bus power. With this tool, a large-scale specific power system was designed in a matter of days. It is an excellent tool to help designers make tradeoffs between system components, hardware architectures, and operation parameters in the early stages of the design cycle. The DSS is a user-friendly, menu-driven tool with online help and a custom graphical user interface. An example design and results are illustrated for a typical space power system with multiple types of power sources, frequencies, energy storage systems, and loads.

Interesting tools for the cybersecurity plan of a nuclear power plant

International Nuclear Information System (INIS)

Pareja, I.; Carrasco, J. A.; Cerro, F. J. del

2012-01-01

The use of digital technologies in monitoring and control systems of nuclear power plants and their connectivity requirements, originate cybersecurity difficulties that should be addressed in a cybersecurity plan. This plan should guide the policies and procedures followed during the design maintenance and operation of the systems inside a nuclear power plant. It also should refer to adequate tools able to reach the established cybersecurity requirements. The combination of Datadiodes and tools for publishing video(like tVGA2web), permit an isolation and remote maintenance in a 100% safety way and their use should be disseminated. In the paper other type of tools useful for nuclear power plants are also mentioned.

Use of computed tomography slices 3D-reconstruction as a powerful tool to improve manufacturing processes on aeroengine components

International Nuclear Information System (INIS)

Castellan, C.; Dastarac, D.

2000-01-01

TURBOMECA has been using computed tomography for several years as an inner-health analysis powerful tool for engine components. From 2D slices of the examined part, detailed information about lacks or inclusions could easily be extracted. But, measurements on internal features were quickly required because no other NDT methods were able to do it. CT has thus logically become a powerful 2D dimensional measuring tool. Recently, with new software and the latest computers able to deal with huge files, CT has become a powerful 3D digitization tool and now, TOMO ADOUR can offer a complete solution for reverse engineering of complex parts. Several months ago, TURBOMECA introduced CT into many development, validation and industrialization processes and has demonstrated how to take corrective actions to process deviation on their aeroengine components by: extracting the nonexisting CAD model of a part, generating CAD compatible data to check dimensional conformity and, eventually correct design misfits or manufacturing drifts, highlighting the metallurgical health of first article parts, making the decision of repairing the defining the appropriate method, generating a file (.STL) to build a rapid prototype or a file to pilot tool parts for machining, calculating physical properties such as behavior or flow analysis on a 'real' model. The image also allows a drawing to be made of a part that was originally produced by a supplier or competitor. This paper will be illustrated with a large number of examples

Harmonic and power balance tools for tapping-mode atomic force microscope

International Nuclear Information System (INIS)

Sebastian, A.; Salapaka, M. V.; Chen, D. J.; Cleveland, J. P.

2001-01-01

The atomic force microscope (AFM) is a powerful tool for investigating surfaces at atomic scales. Harmonic balance and power balance techniques are introduced to analyze the tapping-mode dynamics of the atomic force microscope. The harmonic balance perspective explains observations hitherto unexplained in the AFM literature. A nonconservative model for the cantilever - sample interaction is developed. The energy dissipation in the sample is studied and the resulting power balance equations combined with the harmonic balance equations are used to estimate the model parameters. Experimental results confirm that the harmonic and power balance tools can be used effectively to predict the behavior of the tapping cantilever. [copyright] 2001 American Institute of Physics

A Learning Aid Tool for Power Electronics Converters

Directory of Open Access Journals (Sweden)

O. Bouketir

2005-06-01

Full Text Available It is known that power electronics and its related subjects are not easy to understand for students taking them for first time. This is due to nature of the subjects which involve many areas and disciplines. The introduction of general purpose simulation package has helped the student a step further in understanding this subject. However, because of the generality of these tools and their drag-and drop and ad-hoc features, the students still face problems in designing a converter circuit. In this paper, the problem above is addressed by introducing a learning aid tool that guides the student over prescribed steps to design a power electronics circuit. The tool is knowledge-based system where its knowledge base encompasses two types of knowledge; topologies and switching devices. The first step in the design procedure is the selection of the application of the desired circuit. Then few steps are to be followed to come out with the appropriate topology with the optimum switching devices and parameters. System structure, its different modules and the detailed design procedure are explained in this paper

Online Classrooms: Powerful Tools for Rapid-Iteration Pedagogical Improvements

Science.gov (United States)

Horodyskyj, L.; Semken, S.; Anbar, A.; Buxner, S.

2015-11-01

Online education offers the opportunity to reach a variety of students including non-traditional and geographically diverse students. Research has shown that online courses modeled after traditional lecture-exam courses are ineffective. Over the past three years, Arizona State University developed and offered Habitable Worlds, an online-only astrobiology lab course featuring active learning tools. The course is offered in an intelligent tutoring system (ITS) that records a wealth of student data. In analyzing data from the Fall 2013 offering of the course, we were able to identify pre-post quiz results that were suboptimal and where in the lesson and how precisely students were missing concepts. The problem areas were redesigned, and the improved lessons were deployed a few months later. We saw significant improvements in our pre-post quiz results due to the implemented changes. This demonstrates the effectiveness of using robust ITS not only to present content online, but to provide instantaneous data for rapid iteration and improvement of existing content.

Model for the techno-economic analysis of common work of wind power and CCGT power plant to offer constant level of power in the electricity market

Science.gov (United States)

Tomsic, Z.; Rajsl, I.; Filipovic, M.

2017-11-01

Wind power varies over time, mainly under the influence of meteorological fluctuations. The variations occur on all time scales. Understanding these variations and their predictability is of key importance for the integration and optimal utilization of wind in the power system. There are two major attributes of variable generation that notably impact the participation on power exchanges: Variability (the output of variable generation changes and resulting in fluctuations in the plant output on all time scales) and Uncertainty (the magnitude and timing of variable generation output is less predictable, wind power output has low levels of predictability). Because of these variability and uncertainty wind plants cannot participate to electricity market, especially to power exchanges. For this purpose, the paper presents techno-economic analysis of work of wind plants together with combined cycle gas turbine (CCGT) plant as support for offering continues power to electricity market. A model of wind farms and CCGT plant was developed in program PLEXOS based on real hourly input data and all characteristics of CCGT with especial analysis of techno-economic characteristics of different types of starts and stops of the plant. The Model analyzes the followings: costs of different start-stop characteristics (hot, warm, cold start-ups and shutdowns) and part load performance of CCGT. Besides the costs, the technical restrictions were considered such as start-up time depending on outage duration, minimum operation time, and minimum load or peaking capability. For calculation purposes, the following parameters are necessary to know in order to be able to economically evaluate changes in the start-up process: ramp up and down rate, time of start time reduction, fuel mass flow during start, electricity production during start, variable cost of start-up process, cost and charges for life time consumption for each start and start type, remuneration during start up time regarding

Methods and tools for analysis and optimization of power plants

Energy Technology Data Exchange (ETDEWEB)

Assadi, Mohsen

2000-09-01

The most noticeable advantage of the introduction of the computer-aided tools in the field of power generation, has been the ability to study the plant's performance prior to the construction phase. The results of these studies have made it possible to change and adjust the plant layout to match the pre-defined requirements. Further development of computers in recent years has opened up for implementation of new features in the existing tools and also for the development of new tools for specific applications, like thermodynamic and economic optimization, prediction of the remaining component life time, and fault diagnostics, resulting in improvement of the plant's performance, availability and reliability. The most common tools for pre-design studies are heat and mass balance programs. Further thermodynamic and economic optimization of plant layouts, generated by the heat and mass balance programs, can be accomplished by using pinch programs, exergy analysis and thermoeconomics. Surveillance and fault diagnostics of existing systems can be performed by using tools like condition monitoring systems and artificial neural networks. The increased number of tools and their various construction and application areas make the choice of the most adequate tool for a certain application difficult. In this thesis the development of different categories of tools and techniques, and their application area are reviewed and presented. Case studies on both existing and theoretical power plant layouts have been performed using different commercially available tools to illuminate their advantages and shortcomings. The development of power plant technology and the requirements for new tools and measurement systems have been briefly reviewed. This thesis contains also programming techniques and calculation methods concerning part-load calculations using local linearization, which has been implemented in an inhouse heat and mass balance program developed by the author

Plant nominal power uprating offers attractive possibilities

International Nuclear Information System (INIS)

Bruyere, Michel

2004-01-01

Increasing the rated thermal power of an existing plant represents a particularly profitable way for a plant operator to increase electricity production. For PWR plants, a 5% increase in power can, in fact, generally be achieved without significantly modifying systems and equipments based upon the margin in the original design. Larger power increases can be achieved in the case of S.G. replacement. Based on recent analysis of a 3 loop PWR, 900 MWe, up to 12% power uprating is feasible with an appropriate replacement S.G. The general rule is to perform power uprating without significant increase of average primary temperature. This is mainly a result of consideration of S.G. tube corrosion, of fuel clad corrosion and of core safety margins (DNBR margins in particular). This paper will present a general overview of the analyses for large power uprating: program of work, main conclusions on the following items: 1. Safety demonstration (accident analysis, safeguard systems capacity verification, required protection setpoints modifications...) 2. Normal operation review (possible consequences of power uprating on the plant maneuverability and on the fuel management performances) 3. Systems and components mechanical integrity review and potential effect on the plant lifetime of the new operating conditions

Model for the techno-economic analysis of common work of wind power and CCGT power plant to offer constant level of power in the electricity market

Directory of Open Access Journals (Sweden)

Tomsic Z.

2017-01-01

For calculation purposes, the following parameters are necessary to know in order to be able to economically evaluate changes in the start-up process: ramp up and down rate, time of start time reduction, fuel mass flow during start, electricity production during start, variable cost of start-up process, cost and charges for life time consumption for each start and start type, remuneration during start up time regarding expected or unexpected starts, the cost and revenues for balancing energy (important when participating in electricity market, and the cost or revenues for CO2-certificates. Main motivation for this analysis is to investigate possibilities to participate on power exchanges by offering continues guarantied power from wind plants by backing-up them with CCGT power plant.

49 CFR 176.54 - Repairs involving welding, burning, and power-actuated tools and appliances.

Science.gov (United States)

2010-10-01

...-actuated tools and appliances. 176.54 Section 176.54 Transportation Other Regulations Relating to..., burning, and power-actuated tools and appliances. (a) Except as provided in paragraph (b) of this section, repairs or work involving welding or burning, or the use of power-actuated tools or appliances which may...

Simulation Tools for Power Electronics Courses Based on Java Technologies

Science.gov (United States)

Canesin, Carlos A.; Goncalves, Flavio A. S.; Sampaio, Leonardo P.

2010-01-01

This paper presents interactive power electronics educational tools. These interactive tools make use of the benefits of Java language to provide a dynamic and interactive approach to simulating steady-state ideal rectifiers (uncontrolled and controlled; single-phase and three-phase). Additionally, this paper discusses the development and use of…

Advantages of using 3D design tools in the nuclear power plants projects

International Nuclear Information System (INIS)

Roldan, P.; Melendro, J.; Gomez, A.; Hermana, I.

2011-01-01

It there is anything that distinguished Iberdrola Ingeneria y Construccion, as part of the Iberdrola Group, it is its firm commitment to innovation and continuous improvement. This is the philosophy that led the company to its interest in three-dimensional design tools back when they were in an early stage of development : very little international implementation, lack of integration with other applications, absence of previous experiences to understand the best possible configuration for each case, etc. Nevertheless, the company was able to see the tremendous advantage of having a construction program in the early months of a project- a detailed program that could predict, and therefore avoid, the problems that, if not anticipated, would arise in the construction phase when they result in higher costs, longer timeframes and a multitude of complications. This is precisely what 3D design tools offer prediction and this has been proven in the latest combined cycle projects executed with these tools. A project executed without errors not only decreases cost and time overruns, but also necessarily increases the quality of the end result. Efficiency and quality: these are both basic goals of Iberdrola Ingenieria y Construccion. The knowledge of and skill in the use of these tools have grown at the same time that their development has reached increasingly higher levels. As a result, Iberdrola Ingenieria y Conctruccion now has extensive experience in the use of 3D design tools and is prepared for the future challenges posed by these tools, the capabilities of which have attained such heights that it is possible to take on one of the most technically challenging projects that exists a nuclear power plant. And we are ready. (Author)

A Design Tool for Matching UAV Propeller and Power Plant Performance

Science.gov (United States)

Mangio, Arion L.

A large body of knowledge is available for matching propellers to engines for large propeller driven aircraft. Small UAV's and model airplanes operate at much lower Reynolds numbers and use fixed pitch propellers so the information for large aircraft is not directly applicable. A design tool is needed that takes into account Reynolds number effects, allows for gear reduction, and the selection of a propeller optimized for the airframe. The tool developed in this thesis does this using propeller performance data generated from vortex theory or wind tunnel experiments and combines that data with an engine power curve. The thrust, steady state power, RPM, and tip Mach number vs. velocity curves are generated. The Reynolds number vs. non dimensional radial station at an operating point is also found. The tool is then used to design a geared power plant for the SAE Aero Design competition. To measure the power plant performance, a purpose built engine test stand was built. The characteristics of the engine test stand are also presented. The engine test stand was then used to characterize the geared power plant. The power plant uses a 26x16 propeller, 100/13 gear ratio, and an LRP 0.30 cubic inch engine turning at 28,000 RPM and producing 2.2 HP. Lastly, the measured power plant performance is presented. An important result is that 17 lbf of static thrust is produced.

User-friendly Tool for Power Flow Analysis and Distributed ...

African Journals Online (AJOL)

Akorede

AKOREDE et al: TOOL FOR POWER FLOW ANALYSIS AND DISTRIBUTED GENERATION OPTIMISATION. 23 ... greenhouse gas emissions and the current deregulation of electric energy ..... Visual composition and temporal behaviour of GUI.

WPPT, a tool for on-line wind power prediction

Energy Technology Data Exchange (ETDEWEB)

Skov Nielsen, T. [Dept. of Mathematical Modelling (IMM-DTU), Kgs. Lyngby (Denmark); Madsen, H. [Dept. of Mathematical Modelling (IMM-DTU) Kgs. Lyngby (Denmark); Toefting, J. [Elsam, Fredericia (Denmark)

2004-07-01

This paper dsecribes VPPT (Wind Power Prediction Tool), an application for assessing the future available wind power up to 36 hours ahead in time. WPPT has been installed in the Eltra/Elsam central dispatch center since October 1997. The paper describes the prediction model used, the actual implementation of WPPT as well as the experience gained by the operators in the dispatch center (au)

Development of High-Speed Switched Reluctance Motor for Electric Power Tools

Science.gov (United States)

Nakamura, Kenji; Kumasaka, Yuya; Ichinokura, Osamu

2017-10-01

This paper presents design and experimental evaluation of a switched reluctance (SR) motor used for electric power tools. First, characteristics of a previous designed 6/4-pole SR motor is shown and compared to a permanent magnet (PM) motor used in present electric power tools. Next, to further improve characteristics, a 12/8-pole SR motor is designed and evaluated in experiment. It is proved that the performance of the prototype 12/8-pole SR motor is almost comparable or superior to the present PM motor.

Security constrained optimal power flow by modern optimization tools

African Journals Online (AJOL)

Security constrained optimal power flow by modern optimization tools. ... International Journal of Engineering, Science and Technology ... If you would like more information about how to print, save, and work with PDFs, Highwire Press ...

Introducing AC Inductive Reactance with a Power Tool

Science.gov (United States)

Bryant, Wesley; Baker, Blane

2016-01-01

The concept of reactance in AC electrical circuits is often non-intuitive and difficult for students to grasp. In order to address this lack of conceptual understanding, classroom exercises compare the predicted resistance of a power tool, based on electrical specifications, to measured resistance. Once students discover that measured resistance…

DYNAMIC PROGRAMMING – EFFICIENT TOOL FOR POWER SYSTEM EXPANSION PLANNING

Directory of Open Access Journals (Sweden)

SIMO A.

2015-03-01

Full Text Available The paper isfocusing on dynamic programming use for power system expansion planning (EP – transmission network (TNEP and distribution network (DNEP. The EP problem has been approached from the retrospective and prospective point of view. To achieve this goal, the authors are developing two software-tools in Matlab environment. Two techniques have been tackled: particle swarm optimization (PSO and genetic algorithms (GA. The case study refers to Test 25 buses test power system developed within the Power Systems Department.

Wind offering in energy and reserve markets

DEFF Research Database (Denmark)

Soares, Tiago; Pinson, Pierre; Morais, Hugo

2016-01-01

The increasing penetration of wind generation in power systems to fulfil the ambitious European targets will make wind power producers to play an even more important role in the future power system. Wind power producers are being incentivized to participate in reserve markets to increase...... their revenue, since currently wind turbine/farm technologies allow them to provide ancillary services. Thus, wind power producers are to develop offering strategies for participation in both energy and reserve markets, accounting for market rules, while ensuring optimal revenue. We consider a proportional...... offering strategy to optimally decide upon participation in both markets by maximizing expected revenue from day-ahead decisions while accounting for estimated regulation costs for failing to provide the services. An evaluation of considering the same proportional splitting of energy and reserve in both...

Clinical history in management of suspected syncope: A powerful diagnostic tool

NARCIS (Netherlands)

Sutton, Richard; van Dijk, Nynke; Wieling, Wouter

2014-01-01

In this paper, the role of history taking as a diagnostic tool in patients with transient loss of consciousness (TLOC) is addressed. From a literature review it can be demonstrated that, if properly performed, the history is a powerful diagnostic tool, which in the majority of cases proves to be the

PowerPoint 2010 Bible

CERN Document Server

Wempen, Faithe

2010-01-01

Master PowerPoint and improve your presentation skills-with one book!. It's no longer enough to have slide after slide of text, bullets, and charts. It's not even enough to have good speaking skills if your PowerPoint slides bore your audience. Get the very most out of all that PowerPoint 2010 has to offer while also learning priceless tips and techniques for making good presentations in this new PowerPoint 2010 Bible. Well-known PowerPoint expert and author Faithe Wempen provides formatting tips; shows you how to work with drawings, tables, and SmartArt; introduces new collaboration tools; wa

Experimental Evaluation of Electric Power Grid Visualization Tools in the EIOC

Energy Technology Data Exchange (ETDEWEB)

Greitzer, Frank L.; Dauenhauer, Peter M.; Wierks, Tamara G.; Podmore, Robin; Dalton, Angela C.

2009-12-01

The present study follows an initial human factors evaluation of four electric power grid visualization tools and reports on an empirical evaluation of two of the four tools: Graphical Contingency Analysis, and Phasor State Estimator. The evaluation was conducted within specific experimental studies designed to measure the impact on decision making performance.

Advanced Design Tools for the Lifetime of Power Electronics – Study Case on Motor Drive Application

DEFF Research Database (Denmark)

Ma, Ke; Vernica, Ionut; Blaabjerg, Frede

2016-01-01

assessment of reliability performance for the power electronics is a crucial and emerging need, because it is the essential information for the reliability improvements, and thus reduction of the cost-of-energy. Unfortunately, there is still lack of suitable tools for the reliability assessment in power...... electronics. In this paper, an advanced design tool structure, which can acquire various reliability metrics of the power electronics, is proposed. The proposed design tool is based on the failure mechanisms in the critical components of the power electronics, and the mission profiles in the converter...

Outage planning in nuclear power plants. A paradigm shift from an external towards an integrated project planning tool

Energy Technology Data Exchange (ETDEWEB)

Rosemann, Andreas [Gesellschaft fuer integrierte Systemplanung (GiS) mbH, Weinheim (Germany)

2014-05-15

In nuclear power plants it is common to carry out the technical planning of the annual outage work orders in an Enterprise Application Management (EAM) system and to schedule the outage tasks in a project planning tool. The reason for this is historical: Former EAM systems did not (or just to some extend) offer the necessary functionalities to realise the scheduling of the outage; graphical support for the planning was not provided at all. Consequently, scheduling the annual outage was performed in a separate planning tool. Modern Enterprise Application Management (EAM) software builds on established project planning tools with respect to the functionalities and timing of work orders. As a standard they provide editable charts as well as a lot of functionalities which are required for scheduling the annual outage. The functional gap between the demanded planning functionalities and the functionalities provided by the EAM system has been significantly reduced. Depending on the deployed software itself it is possible to extend the EAM system with little effort (in comparison to the promising advantages) so that external project timing planning tools are not required any more. By shifting towards an integrated planning tool, efficiency in planning an outage as well as the quality of communication of the current planning status increases. Furthermore, the basis of information for work orders by the control room staff and therefore safety can be enhanced. (orig.)

Outage planning in nuclear power plants. A paradigm shift from an external towards an integrated project planning tool

International Nuclear Information System (INIS)

Rosemann, Andreas

2014-01-01

In nuclear power plants it is common to carry out the technical planning of the annual outage work orders in an Enterprise Application Management (EAM) system and to schedule the outage tasks in a project planning tool. The reason for this is historical: Former EAM systems did not (or just to some extend) offer the necessary functionalities to realise the scheduling of the outage; graphical support for the planning was not provided at all. Consequently, scheduling the annual outage was performed in a separate planning tool. Modern Enterprise Application Management (EAM) software builds on established project planning tools with respect to the functionalities and timing of work orders. As a standard they provide editable charts as well as a lot of functionalities which are required for scheduling the annual outage. The functional gap between the demanded planning functionalities and the functionalities provided by the EAM system has been significantly reduced. Depending on the deployed software itself it is possible to extend the EAM system with little effort (in comparison to the promising advantages) so that external project timing planning tools are not required any more. By shifting towards an integrated planning tool, efficiency in planning an outage as well as the quality of communication of the current planning status increases. Furthermore, the basis of information for work orders by the control room staff and therefore safety can be enhanced. (orig.)

Your School's Web Site-A Powerful Tool for Marketing.

Science.gov (United States)

Say, Michael W.; Collier, Karen J.; Hoya, Charlotte, G.

2001-01-01

A successful marketing plan requires a conceptual framework, the ability to target an audience effectively, and the strategy for positioning the school organization appropriately. A website can be a powerful marketing tool if it focuses on what users want and provides it in an organized, accessible fashion. (MLH)

Bildung as a Powerful Tool in Modern University Teaching

Science.gov (United States)

Olesen, Mogens Noergaard

2009-01-01

In this paper we will demonstrate how powerful "Bildung" is as a tool in modern university teaching. The concept of "Bildung" was originally introduced by the German philosopher Immanuel Kant (Kant 1787, 1798, 1804) and the Prussian lawyer and politician Wilhelm von Humboldt (Humboldt 1792, Bohlin 2008). From 1810…

Development of a Computational Tool for Measuring Organizational Competitiveness in the Photovoltaic Power Plants

Directory of Open Access Journals (Sweden)

Carmen B. Rosa

2018-04-01

Full Text Available Photovoltaic (PV power generation is embedded in a globally competitive environment. This characteristic forces PV power plants to perform most processes relevant for their competitiveness with maximum efficiency. From managers’ point of view, the evaluation of solar energy performance from installed plants is justified to indicate their level of organizational competitiveness, which supports the decision-making process. This manuscript purposes a computational tool that graphically presents the level of competitiveness of PV power plants units based on performance indicators. This tool was developed by using the Key Performance Indicators (KPIs concept, which represents a set of measures focusing on the most critical aspects for the success of the organizations. The KPIs encompass four Fundamental Viewpoints (FV: Strategic Alliances, Solar Energy Monitoring, Management and Strategic Processes, and Power Generation Innovations. These four FVs were deployed on 26 Critical Success Factors (CSFs and 39 KPIs. Sequentially, the tool was applied in four solar generation plants, where three presented an organizational competitiveness global level “potentially competitive”. The proposed computational tool allows managers to assess the degree of organization competitiveness as well as aid in prospecting of future scenarios and decision-making.

Optimization Tool for Direct Water Cooling System of High Power IGBT Modules

DEFF Research Database (Denmark)

Bahman, Amir Sajjad; Blaabjerg, Frede

2016-01-01

important issue for thermal design engineers. This paper aims to present a user friendly optimization tool for direct water cooling system of a high power module which enables the cooling system designer to identify the optimized solution depending on customer load profiles and available pump power. CFD...

Wind offering in energy and reserve markets

Science.gov (United States)

Soares, T.; Pinson, P.; Morais, H.

2016-09-01

The increasing penetration of wind generation in power systems to fulfil the ambitious European targets will make wind power producers to play an even more important role in the future power system. Wind power producers are being incentivized to participate in reserve markets to increase their revenue, since currently wind turbine/farm technologies allow them to provide ancillary services. Thus, wind power producers are to develop offering strategies for participation in both energy and reserve markets, accounting for market rules, while ensuring optimal revenue. We consider a proportional offering strategy to optimally decide upon participation in both markets by maximizing expected revenue from day-ahead decisions while accounting for estimated regulation costs for failing to provide the services. An evaluation of considering the same proportional splitting of energy and reserve in both day- ahead and balancing market is performed. A set of numerical examples illustrate the behavior of such strategy. An important conclusion is that the optimal split of the available wind power between energy and reserve strongly depends upon prices and penalties on both market trading floors.

BARC-risk monitor- a tool for operational safety assessment in nuclear power plants

International Nuclear Information System (INIS)

Vinod, Gopika; Saraf, R.K.; Babar, A.K.; Hadap, Nikhil

2000-12-01

Probabilistic safety assessment has become a key tool as on today to identify and understand nuclear power plant vulnerabilities. As a result of the availability of these PSA studies, there is a desire to use them to enhance plant safety and to operate the nuclear stations in the most efficient manner. Risk monitor is a PC based tool, which computes the real time safety level and assists plant personnel to manage day-to-day activities. Risk monitor is a PC based user friendly software tool used for modification and re-analysis of a nuclear power plant. Operation of risk monitor is based on PSA methods for assisting in day to day applications. Risk monitoring programs can assess the risk profile and are used to optimise the operation of nuclear power plants with respect to a minimum risk level over the operating time. This report presents the background activities of risk monitor, its application areas and also gives the status of such tools in international scenarios. The software is based on the PSA model of Kaiga generating station and would be applicable to similar design configuration. (author)

Randomized Controlled Trials: The Most Powerful Tool In Modern ...

African Journals Online (AJOL)

Randomized controlled trial (RCT) can be said to be one of the simplest but most powerful tool of research. It is the most rigorous way of determining whether a cause-effect relation exists between treatment and outcome and for assessing the cost effectiveness of a treatment. Through the randomization, bias will be avoided ...

Risk management: A tool for improving nuclear power plant performance

International Nuclear Information System (INIS)

2001-04-01

This technical document on risk management as a tool for improving nuclear power plant (NPP) operations is part of an ongoing project on management of NPP operations in a competitive environment. The overall objective of this project is to assist the management of operating organizations and NPPs in identifying and implementing appropriate measures to remain competitive in a rapidly changing business environment. Other reports developed through this project have identified overall strategies and techniques that NPP operating organization managers can use to succeed in more competitive energy markets. For example, in IAEA-TECDOC-1123, Strategies for Competitive Nuclear Power Plants, one of the most important strategies identified was integrated risk management. This publication provides a recommended structure for risk management along with examples of how NPP operating organizations are using this tool to help them integrate safety, operational and economic related risks in a changing business environment

Compressed-air power tools in orthopaedic surgery: exhaust air is a potential source of contamination.

Science.gov (United States)

Sagi, H C; DiPasquale, Thomas; Sanders, Roy; Herscovici, Dolfi

2002-01-01

To determine if the exhaust from surgical compressed-air power tools contains bacteria and if the exhaust leads to contamination of sterile surfaces. Bacteriologic study of orthopaedic power tools. Level I trauma center operative theater. None. Part I. Exhaust from two sterile compact air drills was sampled directly at the exhaust port. Part II. Exhaust from the drills was directed at sterile agar plates from varying distances. The agar plates represented sterile surfaces within the operative field. Part III. Control cultures. A battery-powered drill was operated over open agar plates in similar fashion as the compressed-air drills. Agar plates left open in the operative theater served as controls to rule out atmospheric contamination. Random cultures were taken from agar plates, gloves, drills, and hoses. Incidence of positive cultures. In Part I, all filters from both compressed-air drill exhausts were culture negative ( = 0.008). In Part II, the incidence of positive cultures for air drills number one and number two was 73% and 82%, respectively. The most commonly encountered organisms were, coagulase-negative Staphylococcus, and Micrococcus species. All control cultures from agar plates, battery-powered drill, gloves, and hoses were negative ( compressed-air power tools in orthopaedic surgery may contribute to the dissemination of bacteria onto the surgical field. We do not recommend the use of compressed-air power tools that do not have a contained exhaust.

Nuclear power industry, 1981

International Nuclear Information System (INIS)

1981-12-01

The intent of this publication is to provide a single volume of resource material that offers a timely, comprehensive view of the nuclear option. Chapter 1 discusses the development of commercial nuclear power from a historical perspective, reviewing the factors and events that have and will influence its progress. Chapters 2 through 5 discuss in detail the nuclear powerplant and its supporting fuel cycle, including various aspects of each element from fuel supply to waste management. Additional dimension is brought to the discussion by Chapters 6 and 7, which cover the Federal regulation of nuclear power and the nuclear export industry. This vast body of thoroughly documented information offers the reader a useful tool in evaluating the record and potential of nuclear energy in the United States

An improved financial tool to replace BHT

CERN Multimedia

2002-01-01

In November, the BHT tool used to control financial data will be replaced by an improved and more powerful system, called CET for CERN Expenditure Tracking. The team in charge of CET. From left to right, sitting, Martyn Rankin, David McGlashan, standing, Per Gunnar Jonsson, James Purvis and Mikael Angberg. After 10 years of BHT at CERN, in order to face the challenges of the LHC era, and following the recommendations of the External Review Committee, the BHT application will be replaced by an improved and more powerful expenditure tracking tool called CET for CERN Expenditure Tracking. For those who are not familiar with it, the BHT, Budget Holders Toolkit, is a utility that provides a way to view CERN financial data. It is available for users who have access to at least one budget code. The new CET represents a tool that not only allows powerful analysis of the past, but also assists in forecasting the future. CET will offer significantly more functionality than BHT, including extended contract analysis, ...

Accept or Decline? An Analytics-Based Decision Tool for Kidney Offer Evaluation.

Science.gov (United States)

Bertsimas, Dimitris; Kung, Jerry; Trichakis, Nikolaos; Wojciechowski, David; Vagefi, Parsia A

2017-12-01

When a deceased-donor kidney is offered to a waitlisted candidate, the decision to accept or decline the organ relies primarily upon a practitioner's experience and intuition. Such decisions must achieve a delicate balance between estimating the immediate benefit of transplantation and the potential for future higher-quality offers. However, the current experience-based paradigm lacks scientific rigor and is subject to the inaccuracies that plague anecdotal decision-making. A data-driven analytics-based model was developed to predict whether a patient will receive an offer for a deceased-donor kidney at Kidney Donor Profile Index thresholds of 0.2, 0.4, and 0.6, and at timeframes of 3, 6, and 12 months. The model accounted for Organ Procurement Organization, blood group, wait time, DR antigens, and prior offer history to provide accurate and personalized predictions. Performance was evaluated on data sets spanning various lengths of time to understand the adaptability of the method. Using United Network for Organ Sharing match-run data from March 2007 to June 2013, out-of-sample area under the receiver operating characteristic curve was approximately 0.87 for all Kidney Donor Profile Index thresholds and timeframes considered for the 10 most populous Organ Procurement Organizations. As more data becomes available, area under the receiver operating characteristic curve values increase and subsequently level off. The development of a data-driven analytics-based model may assist transplant practitioners and candidates during the complex decision of whether to accept or forgo a current kidney offer in anticipation of a future high-quality offer. The latter holds promise to facilitate timely transplantation and optimize the efficiency of allocation.

TNO-ADVANCE: a modular power train simulation and design tool

NARCIS (Netherlands)

Venne, J.W.C. van de; Hendriksen, P.; Smokers, R.T.M.; Verkiel, M.

1998-01-01

To support its activities in the field of conventional and hybrid vehicles, TNO has developed ADVANCE, a modular simulation tool for the design and evaluation of advanced power trains. In this paper the various features and the potential of ADVANCE are described and illustrated by means of two case

Offering Strategy of a Flexibility Aggregator in a Balancing Market Using Asymmetric Block Offers

DEFF Research Database (Denmark)

Bobo, Lucien Ali; Delikaraoglou, Stefanos; Vespermann, Niklas

2018-01-01

scenarios are used to find optimal load-shifting offers under uncertainty. The problem is formulated as a stochastic mixed-integer linear program and can be solved with reasonable computational time. This work is taking place in the framework of the real-life demonstration project EcoGrid 2.0, which......In order to enable large-scale penetration of renewables with variable generation, new sources of flexibility have to be exploited in the power systems. Allowing asymmetric block offers (including response and rebound blocks) in balancing markets can facilitate the participation of flexibility...... aggregators and unlock load-shifting flexibility from, e.g., thermostatic loads. In this paper, we formulate an optimal offering strategy for a risk-averse flexibility aggregator participating in such a market. Using a price-taker approach, load flexibility characteristics and balancing market price forecast...

A Fast Tool for Assessing the Power Performance of Large WEC arrays

DEFF Research Database (Denmark)

Ruiz, Pau Mercadé

In the present work, a tool for computing wave energy converter array hydrodynamic forces and power performance is developed. The tool leads to a significant reduction on computation time compared with standard boundary element method based codes while keeping similar levels of accuracy. This mak...... it suitable for array layout optimization, where large numbers of simulations are required. Furthermore, the tool is developed within an open-source environment such as Python 2.7 so that it is fully accessible to anyone willing to make use of it....

Dynamic wind turbine models in power system simulation tool DIgSILENT

OpenAIRE

Hansen, A.D.; Jauch, C.; Sørensen, Poul Ejnar; Iov, F.; Blaabjerg, F.

2004-01-01

The present report describes the dynamic wind turbine models implemented in the power system simulation tool DIgSILENT (Version 12.0). The developed models are a part of the results of a national research project, whose overall objective is to create amodel database in different simulation tools. This model database should be able to support the analysis of the interaction between the mechanical structure of the wind turbine and the electrical grid during different operational modes. The repo...

Design for Reliability and Robustness Tool Platform for Power Electronic Systems – Study Case on Motor Drive Applications

DEFF Research Database (Denmark)

Vernica, Ionut; Wang, Huai; Blaabjerg, Frede

2018-01-01

conventional approach, mainly based on failure statistics from the field, the reliability evaluation of the power devices is still a challenging task. In order to address the given problem, a MATLAB based reliability assessment tool has been developed. The Design for Reliability and Robustness (DfR2) tool...... allows the user to easily investigate the reliability performance of the power electronic components (or sub-systems) under given input mission profiles and operating conditions. The main concept of the tool and its framework are introduced, highlighting the reliability assessment procedure for power...... semiconductor devices. Finally, a motor drive application is implemented and the reliability performance of the power devices is investigated with the help of the DfR2 tool, and the resulting reliability metrics are presented....

Energy Bucket: A Tool for Power Profiling and Debugging of Sensor Nodes

DEFF Research Database (Denmark)

Andersen, Jacob; Hansen, Morten Tranberg

2009-01-01

The ability to precisely measure and compare energy consumption and relate this to particular parts of programs is a recurring theme in sensor network research. This paper presents the Energy Bucket, a low-cost tool designed for quick empirical measurements of energy consumptions across 5 decades...... of current draw. The Energy Bucket provides a light-weight state API for the target system, which facilitates easy scorekeeping of energy consumption between different parts of a target program. We demonstrate how this tool can be used to discover programming errors and debug sensor network applications.......Furthermore, we show how this tool, together with the target system API, offers a very detailed analysis of where energy is spent in an application, which proves to be very useful when comparing alternative implementations or validating theoretical energy consumption models....

Smartphones - a powerful Tool for Tourism. Romanian Travel Apps

Directory of Open Access Journals (Sweden)

Sergiu Rusu

2016-01-01

Full Text Available Smartphones are an integral part of everyday life, and more people buy the latest technology, including tourists. Technology evolves at an exponential pace, smartphones are increasingly becoming an indispensable accessory and less a luxury item, like it might have been considered before. The smartphones are now a powerful tool for tourists and travelers, thanks to the mobile applications that help so much the independent travelers.

Design of Contactlessly Powered and Piezoelectrically Actuated Tools for Non-Resonant Vibration Assisted Milling

Directory of Open Access Journals (Sweden)

Martin Silge

2018-04-01

Full Text Available This contribution presents a novel design approach for vibration assisted machining (VAM. A lot of research has already been done regarding the influence of superimposed vibrations during a milling process, but there is almost no information about how to design a VAM tool where the tool is actually rotating. The proposed system consists of a piezoelectric actuator for vibration excitation, an inductive contactless energy transfer system and an electronic circuit for powering the actuated tool. The main benefit of transferring the required power without mechanical contact is that the maximum spindle speed is no longer restricted by friction of slip rings. A detailed model is shown that enables for preliminary estimation of the system’s response to different excitation signals. Experimental data are provided to validate the model. Finally, some parts are shown that have been manufactured using the contactlessly actuated milling tool.

Introducing PCTRAN as an evaluation tool for nuclear power plant emergency responses

International Nuclear Information System (INIS)

Cheng, Yi-Hsiang; Shih, Chunkuan; Chiang, Show-Chyuan; Weng, Tung-Li

2012-01-01

Highlights: ► PCTRAN is integrated with an atmospheric dispersion algorithm. ► The improved PCTRAN acts as an accident/incident simulator and a data exchange system. ► The software helps the responsible organizations decide the rescue and protective actions. ► The evaluation results show the nuclear power plant accident and its off-site dose consequences. ► The software can be used for nuclear power plant emergency responses. - Abstract: Protecting the public from radiation exposure is important if a nuclear power plant (NPP) accident occurs. Deciding appropriate protective actions in a timely and effective manner can be fulfilled by using an effective accident evaluation tool. In our earlier work, we have integrated PCTRAN (Personal Computer Transient Analyzer) with the off-site dose calculation model. In this study, we introduce PCTRAN as an evaluation tool for nuclear power plant emergency responses. If abnormal conditions in the plant are monitored or observed, the plant staffs can distinguish accident/incident initiation events. Thus, the responsible personnel can immediately operate PCTRAN and set up those accident/incident initiation events to simulate the nuclear power plant transient or accident in conjunction with off-site dose distributions. The evaluation results consequently help the responsible organizations decide the rescue and protective actions. In this study, we explain and demonstrate the capabilities of PCTRAN for nuclear emergency responses, through applying it to simulate the postulated nuclear power plant accident scenarios.

Tool for a configurable integrated circuit that uses determination of dynamic power consumption

Science.gov (United States)

French, Matthew C. (Inventor); Wang, Li (Inventor); Agarwal, Deepak (Inventor); Davoodi, Azadeh (Inventor)

2011-01-01

A configurable logic tool that allows minimization of dynamic power within an FPGA design without changing user-entered specifications. The minimization of power may use minimized clock nets as a first order operation, and a second order operation that minimizes other factors, such as area of placement, area of clocks and/or slack.

Assets and place of nuclear power on the European energy market

International Nuclear Information System (INIS)

Damianov, S.; Giger, F.

2001-01-01

In the current context of falling prices, nuclear power proves competitive and this will only progress in the coming years. For the future, nuclear power must draw on two assets, namely environment and economy. It offers a reliable and stable procurement policy, with both security and energy independence. As a matter of fact, only nuclear power may guarantee stable prices over the long term. Other energy sources are branded by a high volatility in prices. And this volatility has a price in itself: customers are obliged to hedge their risk exposure with financial tools. It remains to be assessed what will be the share of these risk-coverage tools in the various energy offers, and what amounts the customers will be ready to pay for their risk-exposure. All the above being economical scenarios in a newly emerging and fluctuating market, where forecasts and market trending are still relatively doubtful. (author)

Pneumatically-powered hand tool used for cutting bolts during bone-fixing in surgery

NARCIS (Netherlands)

Cool, J.C.; Rijnsaardt, K.A.

1996-01-01

Abstract of NL 1000849 (C2) The tool has at least one pneumatic motor (1a, 1b), transmission (2) and regulator. The motor(s) can be of the piston and cylinder type producing reciprocating motion or of the rotary type. The tool is powered by a commercially-available gas cylinder containing 16g of CO2

Periodic table as a powerful tool for radiation education

International Nuclear Information System (INIS)

Aratani, Michi; Osanai, Yuko; Uchiumi, Fumiko; Tsushima, Kazuko; Kamayachi, Tei; Kudo, Michiko

2005-01-01

The periodic tables ordinarily start with an element of atomic number 1, hydrogen. Hydrogen atoms, however, are derived from neutrons by way of β decay. Consequently, neutron should be located at a zero position of atomic number, which corresponds to the left side and above helium. A periodic table, especially with the zero position for neutron, is essential from present view of matter and serves as a powerful tool for radiation education. (author)

Developing a Parametric Urban Design Tool

DEFF Research Database (Denmark)

Steinø, Nicolai; Obeling, Esben

2014-01-01

Parametric urban design is a potentially powerful tool for collaborative urban design processes. Rather than making one- off designs which need to be redesigned from the ground up in case of changes, parametric design tools make it possible keep the design open while at the same time allowing...... for a level of detailing which is high enough to facilitate an understan- ding of the generic qualities of proposed designs. Starting from a brief overview of parametric design, this paper presents initial findings from the development of a parametric urban design tool with regard to developing a structural...... logic which is flexible and expandable. It then moves on to outline and discuss further development work. Finally, it offers a brief reflection on the potentials and shortcomings of the software – CityEngine – which is used for developing the parametric urban design tool....

Development of maintenance tools based on tribology for nuclear power plant

International Nuclear Information System (INIS)

Iwai, Yoshiro; Honda, Tomomi; Yoshinaga, Shigeki

2007-01-01

Many tribological problems occur in the maintenance of nuclear power plants. In this paper, we introduced our developed maintenance tools based on tribology such as a particle counter and wear sensors. Their principals were shown briefly and their usefulness was clarified by the experiments on monitoring of wear. (author)

CRISP. Requirements Specifications of Intelligent ICT Simulation Tools for Power Applications

Energy Technology Data Exchange (ETDEWEB)

Warmer, C.J.; Kester, J.C.P.; Kamphuis, I.G. [ECN Energy in the Built Environment and Networks, Petten (Netherlands); Carlsson, P [EnerSearch, Malmoe (Sweden); Fontela, M. [Laboratory of Electrical Engineering LEG, Grenoble (France); Gustavsson, R. [Blekinge Institute of Technology BTH, Karlskrona (Sweden)

2003-10-15

This report, deliverable D2.1 in the CRISP project, serves as a preparation report for the development of simulation tools and prototype software which will be developed in forthcoming stages of the CRISP project. Application areas for these simulations are: fault detection and diagnosis, supply and demand matching and intelligent load shedding. The context in which these applications function is the power network with a high degree of distributed generation, including renewables. In order to control a so called distributed grid we can benefit from a high level of distributed control and intelligence. This requires, on top of the power system network, an information and communication network.. We argue that such a network should be seen as an enabler of distributed control and intelligence. The applications, through which control and intelligence is implemented, then form a third network layer, the service oriented network. Building upon this three-layered network model we derive in this report the requirements for a simulation tool and experiments which study new techniques for fault detection and diagnostics and for simulation tools and experiments implementing intelligent load shedding and supply and demand matching scenarios. We also look at future implementation of these services within the three-layered network model and the requirements that follow for the core information and communication network and for the service oriented network. These requirements, supported by the studies performed in the CRISP Workpackage 1, serve as a basis for development of the simulation tools in the tasks 2.2 to 2.4.

CRISP. Requirements Specifications of Intelligent ICT Simulation Tools for Power Applications

International Nuclear Information System (INIS)

Warmer, C.J.; Kester, J.C.P.; Kamphuis, I.G.; Carlsson, P; Fontela, M.; Gustavsson, R.

2003-10-01

This report, deliverable D2.1 in the CRISP project, serves as a preparation report for the development of simulation tools and prototype software which will be developed in forthcoming stages of the CRISP project. Application areas for these simulations are: fault detection and diagnosis, supply and demand matching and intelligent load shedding. The context in which these applications function is the power network with a high degree of distributed generation, including renewables. In order to control a so called distributed grid we can benefit from a high level of distributed control and intelligence. This requires, on top of the power system network, an information and communication network.. We argue that such a network should be seen as an enabler of distributed control and intelligence. The applications, through which control and intelligence is implemented, then form a third network layer, the service oriented network. Building upon this three-layered network model we derive in this report the requirements for a simulation tool and experiments which study new techniques for fault detection and diagnostics and for simulation tools and experiments implementing intelligent load shedding and supply and demand matching scenarios. We also look at future implementation of these services within the three-layered network model and the requirements that follow for the core information and communication network and for the service oriented network. These requirements, supported by the studies performed in the CRISP Workpackage 1, serve as a basis for development of the simulation tools in the tasks 2.2 to 2.4

The application of human error prevention tool in Tianwan nuclear power station

International Nuclear Information System (INIS)

Qiao Zhiguo

2013-01-01

This paper mainly discusses the application and popularization of human error prevention tool in Tianwan nuclear power station, including the study on project implementation background, main contents and innovation, performance management, innovation practice and development, and performance of innovation application. (authors)

Text mining and visualization case studies using open-source tools

CERN Document Server

Chisholm, Andrew

2016-01-01

Text Mining and Visualization: Case Studies Using Open-Source Tools provides an introduction to text mining using some of the most popular and powerful open-source tools: KNIME, RapidMiner, Weka, R, and Python. The contributors-all highly experienced with text mining and open-source software-explain how text data are gathered and processed from a wide variety of sources, including books, server access logs, websites, social media sites, and message boards. Each chapter presents a case study that you can follow as part of a step-by-step, reproducible example. You can also easily apply and extend the techniques to other problems. All the examples are available on a supplementary website. The book shows you how to exploit your text data, offering successful application examples and blueprints for you to tackle your text mining tasks and benefit from open and freely available tools. It gets you up to date on the latest and most powerful tools, the data mining process, and specific text mining activities.

Interdisciplinary Area of Research Offers Tool of Cross-Cultural Understanding: Cross-Cultural Student Seminar for Communication Training on Biomedical Engineering

Directory of Open Access Journals (Sweden)

Shigehiro Hashimoto

2013-12-01

Full Text Available Misunderstanding often occurs in a multidisciplinary field of study, because each field has its own background of thinking. Communication training is important for students, who have a potential to develop the multidisciplinary field of study. Because each nation has its own cultural background, communication in an international seminar is not easy, either. A cross-cultural student seminar has been designed for communication training in the multidisciplinary field of study. Students from a variety of back grounds have joined in the seminar. Both equations and figures are effective tools for communication in the field of science. The seminar works well for communication training in the multidisciplinary field of study of biomedical engineering. An interdisciplinary area of research offers the tool of cross-cultural understanding. The present study refers to author's several experiences: the student internship abroad, the cross-cultural student camp, multi PhD theses, various affiliations, and the creation of the interdisciplinary department.

Development Concept of Guaranteed Verification Electric Power System Simulation Tools and Its Realization

Directory of Open Access Journals (Sweden)

Gusev Alexander

2015-01-01

Full Text Available The analysis of existing problem reliability and verification of widespread electric power systems (EPS simulation tools is presented in this article. Everything simulation tools are based on the using of numerical methods for ordinary differential equations. Described the concept of guaranteed verification EPS simulation tools and the structure of its realization are based using the Simulator having properties of continuous , without decomposition three-phase EPS simulation in real time and on an unlimited range with guaranteed accuracy. The information from the Simulator can be verified by using data only quasi-steady-state regime received from the SCADA and such Simulator can be applied as the standard model for verification any EPS simulation tools.

Design of a Power Tool Attachment for Sawing Operation

Directory of Open Access Journals (Sweden)

Mayur Appaiah

2015-07-01

Full Text Available The Design of a Power Tool Attachment for Sawing Operation is discussed. First, the Target Specifications are established. The Design work is carried out, especially that of the Main Shaft and Support Tube. Calculations and Finite Element Analysis (FEA are also done. The Prototype is fabricated and assembled. The Testing of the prototype is done, by Sawing commercial plywood of maximum thickness 25mm. Weight of the Attachment is 1.3 kg, and the Machine is easy to use, benefitting unskilled users.

Factors influencing power hand tool fastening accuracy and reaction forces.

Science.gov (United States)

Radwin, Robert G; Chourasia, Amrish O; Howery, Robert S; Fronczak, Frank J; Yen, Thomas Y; Subedi, Yashpal; Sesto, Mary E

2014-06-01

A laboratory study investigated the relationship between power hand tool and task-related factors affecting threaded fastener torque accuracy and associated handle reaction force. We previously developed a biodynamic model to predict handle reaction forces. We hypothesized that torque accuracy was related to the same factors that affect operator capacity to react against impulsive tool forces, as predicted by the model. The independent variables included tool (pistol grip on a vertical surface, right angle on a horizontal surface), fastener torque rate (hard, soft), horizontal distance (30 cm and 60 cm), and vertical distance (80 cm, 110 cm, and 140 cm). Ten participants (five male and five female) fastened 12 similar bolts for each experimental condition. Average torque error (audited - target torque) was affected by fastener torque rate and operator position. Torque error decreased 33% for soft torque rates, whereas handle forces greatly increased (170%). Torque error also decreased for the far horizontal distance 7% to 14%, when vertical distance was in the middle or high, but handle force decreased slightly 3% to 5%. The evidence suggests that although both tool and task factors affect fastening accuracy, they each influence handle reaction forces differently. We conclude that these differences are attributed to different parameters each factor influences affecting the dynamics of threaded faster tool operation. Fastener torque rate affects the tool dynamics, whereas posture affects the spring-mass-damping biodynamic properties of the human operator. The prediction of handle reaction force using an operator biodynamic model may be useful for codifying complex and unobvious relationships between tool and task factors for minimizing torque error while controlling handle force.

Evaluation of Surface Roughness and Power Consumption in Machining FCD 450 Cast Iron using Coated and Uncoated Irregular Milling Tools

International Nuclear Information System (INIS)

Yusoff, Ahmad Razlan; Arsyad, Fitriyanti

2016-01-01

In this project, the effects of different cutting parameters on surface roughness and power consumption when machining FCD450 cast iron were studied using coated and uncoated irregular milling tool geometry of variable helix and pitch. Their responses on roughness and power consumption were evaluated based on the spindle speed, feed rate, and depth of cut, machining length and machining time. Results showed that except spindle speed and machining length, other parameters such as feed rate, axial and radial depth of cut and also machining time proportionate with surface roughness. The power consumption proportionately increase for all cutting parameters except feedrate. It is showed that the average decrement 27.92 percent for surface roughness and average decrement 9.32 percent for power consumption by using coated compared to uncoated tool. Optimum cutting parameters for both minimum surface roughness and power consumption can be determined. The coated tools performed better than uncoated milling tools for responses of surface roughness and power consumption to increase machining productivity and profit. (paper)

Offering model for a virtual power plant based on stochastic programming

DEFF Research Database (Denmark)

PandŽić, Hrvoje; Morales González, Juan Miguel; Conejo, Antonio J.

2013-01-01

A virtual power plant aggregates various local production/consumption units that act in the market as a single entity. This paper considers a virtual power plant consisting of an intermittent source, a storage facility, and a dispatchable power plant. The virtual power plant sells and purchases e...

Thomson Parabola Spectrometer: a powerful tool to get on-line plasma information

International Nuclear Information System (INIS)

Altana, C.; Schillaci, F.; Anzalone, A.; Cirrone, G.A.P; Tudisco, S.; Lanzalone, G.; Muoio, A.

2015-01-01

In this contribution we report the results of an experimental measurement performed with a TPS developed at INFN-LNS within the ELIMED project, by means of a powerful and self-consistent technique as a diagnostic tool for the ionic acceleration study in laser-generated-plasmas. (authors)

Thomson Parabola Spectrometer: a powerful tool to get on-line plasma information

Energy Technology Data Exchange (ETDEWEB)

Altana, C. [Laboratori Nazionali del Sud - INFN - Catania (Italy); Universita degli Studi di Catania - Dip.to di Fisica e Astronomia - Catania (Italy); Schillaci, F.; Anzalone, A.; Cirrone, G.A.P; Tudisco, S. [Laboratori Nazionali del Sud - INFN - Catania (Italy); Lanzalone, G. [Laboratori Nazionali del Sud - INFN - Catania (Italy); Univerita Kore di Enna - Enna (Italy); Muoio, A. [Laboratori Nazionali del Sud - INFN - Catania (Italy); Universita degli Studi di Messina - Dip.to di Fisica e di Scienze della Terra - Messina (Italy)

2015-07-01

In this contribution we report the results of an experimental measurement performed with a TPS developed at INFN-LNS within the ELIMED project, by means of a powerful and self-consistent technique as a diagnostic tool for the ionic acceleration study in laser-generated-plasmas. (authors)

Dynamic wind turbine models in power system simulation tool

DEFF Research Database (Denmark)

Hansen, Anca D.; Iov, Florin; Sørensen, Poul

, connection of the wind turbine at different types of grid and storage systems. Different control strategies have been developed and implemented for these wind turbine concepts, their performance in normal or fault operation being assessed and discussed by means of simulations. The described control......This report presents a collection of models and control strategies developed and implemented in the power system simulation tool PowerFactory DIgSILENT for different wind turbine concepts. It is the second edition of Risø-R-1400(EN) and it gathers and describes a whole wind turbine model database...... of the interaction between the mechanical structure of the wind turbine and the electrical grid during different operational modes. The report provides thus a description of the wind turbines modelling, both at a component level and at a system level. The report contains both the description of DIgSILENT built...

DP-THOT - a calculational tool for bundle-specific decay power based on actual irradiation history

International Nuclear Information System (INIS)

Johnston, S.; Morrison, C.A.; Albasha, H.; Arguner, D.

2005-01-01

A tool has been created for calculating the decay power of an individual fuel bundle to take account of its actual irradiation history, as tracked by the fuel management code SORO. The DP-THOT tool was developed in two phases: first as a standalone executable code for decay power calculation, which could accept as input an entirely arbitrary irradiation history; then as a module integrated with SORO auxiliary codes, which directly accesses SORO history files to retrieve the operating power history of the bundle since it first entered the core. The methodology implemented in the standalone code is based on the ANSI/ANS-5.1-1994 formulation, which has been specifically adapted for calculating decay power in irradiated CANDU reactor fuel, by making use of fuel type specific parameters derived from WIMS lattice cell simulations for both 37 element and 28 element CANDU fuel bundle types. The approach also yields estimates of uncertainty in the calculated decay power quantities, based on the evaluated error in the decay heat correlations built-in for each fissile isotope, in combination with the estimated uncertainty in user-supplied inputs. The method was first implemented in the form of a spreadsheet, and following successful testing against decay powers estimated using the code ORIGEN-S, the algorithm was coded in FORTRAN to create an executable program. The resulting standalone code, DP-THOT, accepts an arbitrary irradiation history and provides the calculated decay power and estimated uncertainty over any user-specified range of cooling times, for either 37 element or 28 element fuel bundles. The overall objective was to produce an integrated tool which could be used to find the decay power associated with any identified fuel bundle or channel in the core, taking into account the actual operating history of the bundles involved. The benefit is that the tool would allow a more realistic calculation of bundle and channel decay powers for outage heat sink planning

Dynamic wind turbine models in power system simulation tool DIgSILENT

Energy Technology Data Exchange (ETDEWEB)

Hansen, A.C.; Jauch, C.; Soerensen, P.; Iov, F.; Blaabjerg, F.

2003-12-01

The present report describes the dynamic wind turbine models implemented in the power system simulation tool DIgSILENT (Version 12.0). The developed models are a part of the results of a national research project, whose overall objective is to create a model database in different simulation tools. This model database should be able to support the analysis of the interaction between the mechanical structure of the wind turbine and the electrical grid during different operational modes. The report provides a description of the wind turbines modelling, both at a component level and at a system level. The report contains both the description of DIgSILENT built-in models for the electrical components of a grid connected wind turbine (e.g. induction generators, power converters, transformers) and the models developed by the user, in the dynamic simulation language DSL of DIgSILENT, for the non-electrical components of the wind turbine (wind model, aerodynamic model, mechanical model). The initialisation issues on the wind turbine models into the power system simulation are also presented. However, the main attention in this report is drawn to the modelling at the system level of two wind turbine concepts: 1. Active stall wind turbine with induction generator 2. Variable speed, variable pitch wind turbine with doubly fed induction generator. These wind turbine concept models can be used and even extended for the study of different aspects, e.g. the assessment of power quality, control strategies, connection of the wind turbine at different types of grid and storage systems. For both these two concepts, control strategies are developed and implemented, their performance assessed and discussed by means of simulations. (au)

The use of ultrasound for decontamination of tools and equipment in nuclear power plant Krshko

International Nuclear Information System (INIS)

Erman, R.

1987-01-01

This paper describes the main principles of the ultrasonic generator functioning and the use of ultrasound for decontamination of tools and equipment in nuclear power plant Krshko. The paper gives the operating procedure and presents decontamination results of tools and equipment fabricated from various materials. (author) 3 refs.; 1 tab

Emerging Network-Based Tools in Movement Ecology.

Science.gov (United States)

Jacoby, David M P; Freeman, Robin

2016-04-01

New technologies have vastly increased the available data on animal movement and behaviour. Consequently, new methods deciphering the spatial and temporal interactions between individuals and their environments are vital. Network analyses offer a powerful suite of tools to disentangle the complexity within these dynamic systems, and we review these tools, their application, and how they have generated new ecological and behavioural insights. We suggest that network theory can be used to model and predict the influence of ecological and environmental parameters on animal movement, focusing on spatial and social connectivity, with fundamental implications for conservation. Refining how we construct and randomise spatial networks at different temporal scales will help to establish network theory as a prominent, hypothesis-generating tool in movement ecology. Copyright © 2016 Elsevier Ltd. All rights reserved.

Benefits for wind energy in electricity markets from using short term wind power prediction tools: a simulation study

International Nuclear Information System (INIS)

Usaola, J.; Ravelo, O.; Gonzalez, G.; Soto, F.; Davila, M.C.; Diaz-Guerra, B.

2004-01-01

One of the characteristics of wind energy, from the grid point of view, is its non-dispatchability, i.e. generation cannot be ordered, hence integration in electrical networks may be difficult. Short-term wind power prediction-tools could make this integration easier, either by their use by the grid System Operator, or by promoting the participation of wind farms in the electricity markets and using prediction tools to make their bids in the market. In this paper, the importance of a short-term wind power-prediction tool for the participation of wind energy systems in electricity markets is studied. Simulations, according to the current Spanish market rules, have been performed to the production of different wind farms, with different degrees of accuracy in the prediction tool. It may be concluded that income from participation in electricity markets is increased using a short-term wind power prediction-tool of average accuracy. This both marginally increases income and also reduces the impact on system operation with the improved forecasts. (author)

The power of data--from data mining to consumer pricing and quality-of-care tools.

Science.gov (United States)

Malof, Leah C

2013-01-01

Transparency tools, whether offered by carriers or third-party administrators, rely on adequate experience, by market and by service, to provide information to consumers about health care costs and quality of care. The opportunities for savings to individual consumers and to employer-sponsored health plans are clearly significant and possible if people will use the tools and act. This article reviews two studies showing a shift in consumer claims experience to less costly services afte the implementation of a transparency tool and when combined with a consumer-driven health plan. It also outlines best practices employers can implement to carefully craft interventions to engage and create value in the minds of health care consumers.

Simulation tools

CERN Document Server

Jenni, F

2006-01-01

In the last two decades, simulation tools made a significant contribution to the great progress in development of power electronics. Time to market was shortened and development costs were reduced drastically. Falling costs, as well as improved speed and precision, opened new fields of application. Today, continuous and switched circuits can be mixed. A comfortable number of powerful simulation tools is available. The users have to choose the best suitable for their application. Here a simple rule applies: The best available simulation tool is the tool the user is already used to (provided, it can solve the task). Abilities, speed, user friendliness and other features are continuously being improved—even though they are already powerful and comfortable. This paper aims at giving the reader an insight into the simulation of power electronics. Starting with a short description of the fundamentals of a simulation tool as well as properties of tools, several tools are presented. Starting with simplified models ...

From a fuel supplier to an active participant: Shell's view of the opportunities offered by a changing power market

International Nuclear Information System (INIS)

Nyhan, J.

1998-01-01

In the last 10 years, the power generation market has seen radical changes. The coming years will see yet more change. Although the pace of change may be uneven across Europe, it is clear that the old reference points for the power generation market are no longer valid. Along with other market players, Shell has re-evaluated the role it wishes to play in the power generation market. Although it has long operated large generation capacity on its own sites, Shell's role has been that of a fuel supplier to monopoly power generation and distribution organizations, which were largely state controlled . Privatization and liberalization have been followed by changing market structures tending to push risk towards the producer. This evolution presents challenges for the normal IPP structure, where market risk is transferred and offers an opportunity for the active participation of the fuel supplier in meeting these challenges. In 1996, Shell decided to embrace the changes in power generation market. Already, significant steps have been taken in markets in Asia, Latin America and in Europe. The differing requirements of each of these markets means there are no standard solutions and requires Shell to devise flexible frameworks which meet the customer's needs. Shell is bringing its significant strengths to the power generation market and looks forward to participating on a world wide scale in the industry at this exciting phase in its development

Economic Dispatch of Demand Response Balancing through Asymmetric Block Offers

DEFF Research Database (Denmark)

O'Connell, Niamh; Pinson, Pierre; Madsen, Henrik

2015-01-01

This paper proposes a method of describing the load shifting ability of flexible electrical loads in a manner suitable for existing power system dispatch frameworks. The concept of an asymmetric block offer for flexible loads is introduced. This offer structure describes the ability of a flexible...

Improving Power System Modeling. A Tool to Link Capacity Expansion and Production Cost Models

Energy Technology Data Exchange (ETDEWEB)

Diakov, Victor [National Renewable Energy Lab. (NREL), Golden, CO (United States); Cole, Wesley [National Renewable Energy Lab. (NREL), Golden, CO (United States); Sullivan, Patrick [National Renewable Energy Lab. (NREL), Golden, CO (United States); Brinkman, Gregory [National Renewable Energy Lab. (NREL), Golden, CO (United States); Margolis, Robert [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2015-11-01

Capacity expansion models (CEM) provide a high-level long-term view at the prospects of the evolving power system. In simulating the possibilities of long-term capacity expansion, it is important to maintain the viability of power system operation in the short-term (daily, hourly and sub-hourly) scales. Production-cost models (PCM) simulate routine power system operation on these shorter time scales using detailed load, transmission and generation fleet data by minimizing production costs and following reliability requirements. When based on CEM 'predictions' about generating unit retirements and buildup, PCM provide more detailed simulation for the short-term system operation and, consequently, may confirm the validity of capacity expansion predictions. Further, production cost model simulations of a system that is based on capacity expansion model solution are 'evolutionary' sound: the generator mix is the result of logical sequence of unit retirement and buildup resulting from policy and incentives. The above has motivated us to bridge CEM with PCM by building a capacity expansion - to - production cost model Linking Tool (CEPCoLT). The Linking Tool is built to onset capacity expansion model prescriptions onto production cost model inputs. NREL's ReEDS and Energy Examplar's PLEXOS are the capacity expansion and the production cost models, respectively. Via the Linking Tool, PLEXOS provides details of operation for the regionally-defined ReEDS scenarios.

48 CFR 570.303-3 - Late offers, modifications of offers, and withdrawals of offers.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Late offers, modifications of offers, and withdrawals of offers. 570.303-3 Section 570.303-3 Federal Acquisition Regulations... PROPERTY Contracting Procedures for Leasehold Interests in Real Property 570.303-3 Late offers...

Development of real-time voltage stability monitoring tool for power system transmission network using Synchrophasor data

Science.gov (United States)

Pulok, Md Kamrul Hasan

Intelligent and effective monitoring of power system stability in control centers is one of the key issues in smart grid technology to prevent unwanted power system blackouts. Voltage stability analysis is one of the most important requirements for control center operation in smart grid era. With the advent of Phasor Measurement Unit (PMU) or Synchrophasor technology, real time monitoring of voltage stability of power system is now a reality. This work utilizes real-time PMU data to derive a voltage stability index to monitor the voltage stability related contingency situation in power systems. The developed tool uses PMU data to calculate voltage stability index that indicates relative closeness of the instability by producing numerical indices. The IEEE 39 bus, New England power system was modeled and run on a Real-time Digital Simulator that stream PMU data over the Internet using IEEE C37.118 protocol. A Phasor data concentrator (PDC) is setup that receives streaming PMU data and stores them in Microsoft SQL database server. Then the developed voltage stability monitoring (VSM) tool retrieves phasor measurement data from SQL server, performs real-time state estimation of the whole network, calculate voltage stability index, perform real-time ranking of most vulnerable transmission lines, and finally shows all the results in a graphical user interface. All these actions are done in near real-time. Control centers can easily monitor the systems condition by using this tool and can take precautionary actions if needed.

Seawater desalination with nuclear power

International Nuclear Information System (INIS)

2005-01-01

Nuclear power helps reduce costs for energy-intensive processes such as seawater desalination. A new generation of innovative small and medium nuclear power plants could co-generate electricity and potable water from seawater, both safely and at competitive prices in today's market. The IAEA provides technical support to Member States facing water shortage problems, on assessing the viability of nuclear power in seawater desalination. The support, usually channelled through national Technical Cooperation (TC) projects, can take several forms, ranging from educational training and technical advice on feasibility studies to design and safety review of demonstration projects. The IAEA offers a software tool (DEEP) that can be used to evaluate the economics of the different desalination and heat source configurations, including nuclear and fossil options

Comparison of BrainTool to other UML modeling and model transformation tools

Science.gov (United States)

Nikiforova, Oksana; Gusarovs, Konstantins

2017-07-01

In the last 30 years there were numerous model generated software systems offered targeting problems with the development productivity and the resulting software quality. CASE tools developed due today's date are being advertised as having "complete code-generation capabilities". Nowadays the Object Management Group (OMG) is calling similar arguments in regards to the Unified Modeling Language (UML) models at different levels of abstraction. It is being said that software development automation using CASE tools enables significant level of automation. Actual today's CASE tools are usually offering a combination of several features starting with a model editor and a model repository for a traditional ones and ending with code generator (that could be using a scripting or domain-specific (DSL) language), transformation tool to produce the new artifacts from the manually created and transformation definition editor to define new transformations for the most advanced ones. Present paper contains the results of CASE tool (mainly UML editors) comparison against the level of the automation they are offering.

DNA Microarrays: a Powerful Genomic Tool for Biomedical and Clinical Research

OpenAIRE

Trevino, Victor; Falciani, Francesco; Barrera-Saldaña, Hugo A

2007-01-01

Among the many benefits of the Human Genome Project are new and powerful tools such as the genome-wide hybridization devices referred to as microarrays. Initially designed to measure gene transcriptional levels, microarray technologies are now used for comparing other genome features among individuals and their tissues and cells. Results provide valuable information on disease subcategories, disease prognosis, and treatment outcome. Likewise, they reveal differences in genetic makeup, regulat...

The ultimatum game: Discrete vs. continuous offers

Science.gov (United States)

Dishon-Berkovits, Miriam; Berkovits, Richard

2014-09-01

In many experimental setups in social-sciences, psychology and economy the subjects are requested to accept or dispense monetary compensation which is usually given in discrete units. Using computer and mathematical modeling we show that in the framework of studying the dynamics of acceptance of proposals in the ultimatum game, the long time dynamics of acceptance of offers in the game are completely different for discrete vs. continuous offers. For discrete values the dynamics follow an exponential behavior. However, for continuous offers the dynamics are described by a power-law. This is shown using an agent based computer simulation as well as by utilizing an analytical solution of a mean-field equation describing the model. These findings have implications to the design and interpretation of socio-economical experiments beyond the ultimatum game.

The Evaluation and Application Plan Report for the Development of Nuclear Power Plant DCS Using CASE Tools

Energy Technology Data Exchange (ETDEWEB)

Lee, B.Y.; Moon, H.J.; Yoon, M.H.; Lee, Y.K. [Korea Electric Power Research Institute, Taejon (Korea)

2000-06-01

This report contains the evaluation and application plan report for the development of nuclear power plant DCS using CASE tools. In this report, the necessity of using CASE tools is considered and a available CASE environment is suggested. And, also according to the IEEE Std 1209 Recommended Practice for Evaluation and Selection of CASE Tools, their functional and economical evaluation about available commercial CASE tools is performed and described. (author). 6 figs., 3 tabs.

Electric drive for portable power tools with maximum power supply form the 230 Volt mains; Antriebskonzept fuer Elektrowerkzeuge und den Bezug maximaler Leistung aus dem einphasigen 230-Volt-Netz

Energy Technology Data Exchange (ETDEWEB)

Wolff, J. [Karlsruhe Univ. (Germany). Elektrotechnisches Inst.

2007-07-01

A new electric drive for hand-held tools and other portable power tools is described in this article. The novel drive concept is designed for the advantageous connection to common 230 V sockets. Based on its special power supply unit and a high drive efficiency a maximum power output about 2700 W can be achieved in continuous operation. Motor speed and gear ratio are adjustable. The drive concept is already used successfully in serial production of core drill machines. (orig.)

User-friendly Tool for Power Flow Analysis and Distributed Generation Optimisation in Radial Distribution Networks

Directory of Open Access Journals (Sweden)

M. F. Akorede

2017-06-01

Full Text Available The intent of power distribution companies (DISCOs is to deliver electric power to their customers in an efficient and reliable manner – with minimal energy loss cost. One major way to minimise power loss on a given power system is to install distributed generation (DG units on the distribution networks. However, to maximise benefits, it is highly crucial for a DISCO to ensure that these DG units are of optimal size and sited in the best locations on the network. This paper gives an overview of a software package developed in this study, called Power System Analysis and DG Optimisation Tool (PFADOT. The main purpose of the graphical user interface-based package is to guide a DISCO in finding the optimal size and location for DG placement in radial distribution networks. The package, which is also suitable for load flow analysis, employs the GUI feature of MATLAB. Three objective functions are formulated into a single optimisation problem and solved with fuzzy genetic algorithm to simultaneously obtain DG optimal size and location. The accuracy and reliability of the developed tool was validated using several radial test systems, and the results obtained are evaluated against the existing similar package cited in the literature, which are impressive and computationally efficient.

Survey on the use of configuration risk and safety management tools at nuclear power plants. Final report

International Nuclear Information System (INIS)

Fleming, K.N.; Read, J.W.; Dagan, W.J.; Bidwell, D.A.

1998-09-01

In order to provide input to Electricite de France's (EDF) evaluation of the use of configuration safety and risk management tools in the French plants and to collect information to guide the EPRI efforts to provide useful tools for the EPRI member utilities and international partners, a joint effort to survey US and selected non-US nuclear power stations was conducted. This survey examined the use of various approaches, techniques, and software tools that are being used to evaluate the safety and risk aspects of plant configuration changes and configuration changes during plant outages as well as during power operation. The use of these tools has increased in recent years as a result of efforts to optimize plant maintenance programs, improve plant safety, and increase plant reliability and availability. This report provides the results of the survey of 37 organizations covering 54 nuclear plant sites and 97 reactor units

Quality assurance programs from laboratories offering radiological protection services

International Nuclear Information System (INIS)

Marrero Garcia, M.; Prendes Alonso, M.; Jova Sed, L.; Morales Monzon, J.A.

1998-01-01

The implementation of an adequate program for quality assurance in institutions servicing radiological protection programs will become an additional tool to achieve security targets included in that program. All scientific and technical services offered by CPHR employ quality assurance systems

CJEP will offer open science badges.

Science.gov (United States)

Pexman, Penny M

2017-03-01

This editorial announces the decision of the Canadian Journal of Experimental Psychology (CJEP) to offer Open Science Framework (OSF) Badges. The Centre for Open Science provides tools to facilitate open science practices. These include the OSF badges. The badges acknowledge papers that meet standards for openness of data, methods, or research process. They are now described in the CJEP Submission Guidelines, and are provided in the editorial. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Power Watch - A global, open database of power plants that supports research on climate, water and air pollution impact of the global power sector.

Science.gov (United States)

Friedrich, J.; Kressig, A.; Van Groenou, S.; McCormick, C.

2017-12-01

Challenge The lack of transparent, accessible, and centralized power sector data inhibits the ability to research the impact of the global power sector. information gaps for citizens, analysts, and decision makers worldwide create barriers to sustainable development efforts. The need for transparent, accessible, and centralized information is especially important to enhance the commitments outlined in the recently adopted Paris Agreement and Sustainable Development Goals. Offer Power Watch will address this challenge by creating a comprehensive, open-source platform on the world's power systems. The platform hosts data on 85% of global installed electrical capacity and for each power plant will include data points on installed capacity, fuel type, annual generation, commissioning year, with more characteristics like emissions, particulate matter, annual water demand and more added over time. Most of the data is reported from national level sources, but annual generation and other operational characteristiscs are estimated via Machine Learning modeling and remotely sensed data when not officially reported. In addition, Power Watch plans to provide a suite of tools that address specific decision maker needs, such as water risk assessments and air pollution modeling. Impact Through open data, the platform and its tools will allow reserachers to do more analysis of power sector impacts and perform energy modeling. It will help catalyze accountability for policy makers, businesses, and investors and will inform and drive the transition to a clean energy future while reaching development targets.

Driving the Power of AIX Performance Tuning on IBM Power

CERN Document Server

Milberg, Ken

2009-01-01

A concise reference for IT professionals, this book goes beyond the rules and contains the best practices and strategies for solid tuning methodology. Tips based on years of experience from an AIX tuning master show specific steps for monitoring and tuning CPU, virtual memory, disk I/O, and network components. Also offering techniques for tuning Oracle and Linux structures that run on an IBM power system-as well as for the new AIX 6.1-this manual discusses what tools are available, how to best use them to collect historical data, and when to analyze trends and results. The only comprehensive,

Optimization of calculation models of maintenance offers for new civil engines

OpenAIRE

Pechoutre, Jean-Baptiste

2011-01-01

The sales support department performs calculations concerning maintenance offerings for civil engines based on the use of complex tools. This report describes the missions conducted during my Master's thesis: firstly, the establishment of a monitoring and security tool in the process of calculating maintenance costs. The second achievement is the creation of a tool for decision support in order to estimate and compare some of the maintenance costs associated with the use of the new commercial...

Big Data is a powerful tool for environmental improvements in the construction business

Science.gov (United States)

Konikov, Aleksandr; Konikov, Gregory

2017-10-01

The work investigates the possibility of applying the Big Data method as a tool to implement environmental improvements in the construction business. The method is recognized as effective in analyzing big volumes of heterogeneous data. It is noted that all preconditions exist for this method to be successfully used for resolution of environmental issues in the construction business. It is proven that the principal Big Data techniques (cluster analysis, crowd sourcing, data mixing and integration) can be applied in the sphere in question. It is concluded that Big Data is a truly powerful tool to implement environmental improvements in the construction business.

Model-based reasoning technology for the power industry

International Nuclear Information System (INIS)

Touchton, R.A.; Subramanyan, N.S.; Naser, J.A.

1991-01-01

This paper reports on model-based reasoning which refers to an expert system implementation methodology that uses a model of the system which is being reasoned about. Model-based representation and reasoning techniques offer many advantages and are highly suitable for domains where the individual components, their interconnection, and their behavior is well-known. Technology Applications, Inc. (TAI), under contract to the Electric Power Research Institute (EPRI), investigated the use of model-based reasoning in the power industry including the nuclear power industry. During this project, a model-based monitoring and diagnostic tool, called ProSys, was developed. Also, an alarm prioritization system was developed as a demonstration prototype

The influence nuclear power has on corporate image and the effect of offering merit information of nuclear power

International Nuclear Information System (INIS)

Oiso, Shinichi

2006-01-01

Many electric power companies in Japan, irrespective of their nuclear power generation ratio's difference, have nuclear power plants. These days, corporate brand image is becoming more and more important. Therefore, a survey was carried out to study the effect that nuclear power (including comparison with the other type of industry besides electric power) has on the corporate image of an electric power company. Further more, the survey includes a research about the effect on people's attitude change towards nuclear power before and after discovering the merits or benefits of nuclear power. The possibility of enhancing the corporate brand image of electric power companies by providing merit information of nuclear power was studied. (author)

A Visualization Tool to Analyse Usage of Web-Based Interventions: The Example of Positive Online Weight Reduction (POWeR)

Science.gov (United States)

Smith, Emily; Bradbury, Katherine; Morrison, Leanne; Dennison, Laura; Michaelides, Danius; Yardley, Lucy

2015-01-01

Background Attrition is a significant problem in Web-based interventions. Consequently, this research aims to identify the relation between Web usage and benefit from such interventions. A visualization tool has been developed that enables researchers to more easily examine large datasets on intervention usage that can be difficult to make sense of using traditional descriptive or statistical techniques alone. Objective This paper demonstrates how the visualization tool was used to explore patterns in participants’ use of a Web-based weight management intervention, termed "positive online weight reduction (POWeR)." We also demonstrate how the visualization tool can be used to perform subsequent statistical analyses of the association between usage patterns, participant characteristics, and intervention outcome. Methods The visualization tool was used to analyze data from 132 participants who had accessed at least one session of the POWeR intervention. Results There was a drop in usage of optional sessions after participants had accessed the initial, core POWeR sessions, but many users nevertheless continued to complete goal and weight reviews. The POWeR tools relating to the food diary and steps diary were reused most often. Differences in participant characteristics and usage of other intervention components were identified between participants who did and did not choose to access optional POWeR sessions (in addition to the initial core sessions) or reuse the food and steps diaries. Reuse of the steps diary and the getting support tools was associated with greater weight loss. Conclusions The visualization tool provided a quick and efficient method for exploring patterns of Web usage, which enabled further analyses of whether different usage patterns were associated with participant characteristics or differences in intervention outcome. Further usage of visualization techniques is recommended to (1) make sense of large datasets more quickly and efficiently; (2

Evaluation of static analysis tools used to assess software important to nuclear power plant safety

Energy Technology Data Exchange (ETDEWEB)

Ourghanlian, Alain [EDF Lab CHATOU, Simulation and Information Technologies for Power Generation Systems Department, EDF R and D, Cedex (France)

2015-03-15

We describe a comparative analysis of different tools used to assess safety-critical software used in nuclear power plants. To enhance the credibility of safety assessments and to optimize safety justification costs, Electricit e de France (EDF) investigates the use of methods and tools for source code semantic analysis, to obtain indisputable evidence and help assessors focus on the most critical issues. EDF has been using the PolySpace tool for more than 10 years. Currently, new industrial tools based on the same formal approach, Abstract Interpretation, are available. Practical experimentation with these new tools shows that the precision obtained on one of our shutdown systems software packages is substantially improved. In the first part of this article, we present the analysis principles of the tools used in our experimentation. In the second part, we present the main characteristics of protection-system software, and why these characteristics are well adapted for the new analysis tools.

Web tools for predictive toxicology model building.

Science.gov (United States)

Jeliazkova, Nina

2012-07-01

The development and use of web tools in chemistry has accumulated more than 15 years of history already. Powered by the advances in the Internet technologies, the current generation of web systems are starting to expand into areas, traditional for desktop applications. The web platforms integrate data storage, cheminformatics and data analysis tools. The ease of use and the collaborative potential of the web is compelling, despite the challenges. The topic of this review is a set of recently published web tools that facilitate predictive toxicology model building. The focus is on software platforms, offering web access to chemical structure-based methods, although some of the frameworks could also provide bioinformatics or hybrid data analysis functionalities. A number of historical and current developments are cited. In order to provide comparable assessment, the following characteristics are considered: support for workflows, descriptor calculations, visualization, modeling algorithms, data management and data sharing capabilities, availability of GUI or programmatic access and implementation details. The success of the Web is largely due to its highly decentralized, yet sufficiently interoperable model for information access. The expected future convergence between cheminformatics and bioinformatics databases provides new challenges toward management and analysis of large data sets. The web tools in predictive toxicology will likely continue to evolve toward the right mix of flexibility, performance, scalability, interoperability, sets of unique features offered, friendly user interfaces, programmatic access for advanced users, platform independence, results reproducibility, curation and crowdsourcing utilities, collaborative sharing and secure access.

Plato (power load analysis tool) - a module of west wall monitoring system

International Nuclear Information System (INIS)

Ranjan, Sutapa; Travere, Jean-marcel; Moreau, P.

2015-01-01

The mandate of the WEST (W Environment for Steady-state Tokamak) project, is to upgrade the medium- sized superconducting Tokamak, Tore Supra in a major scale. One of it's objectives, is to also act as a test-bed for ITER divertor components, to be procured and used in ITER. WEST would be installing actively cooled Tungsten divertor elements, like the ones to be used in ITER. These components would be tested under two experimental scenarios: high power (Ip = 0.8MA, lasting 30s with 15MW injected power) and high fluence (Ip = 0.6 MA, lasting 1000s with 12 MW injected power). Heat load on the divertor target will range from a few MW/m 2 up to 20 MW/m 2 depending on the X point location and the heat flux decay length. The tungsten Plasma Facing Components (PFCs) are less tolerant to overheating than their Carbon counterparts and prevention of their burnout is a major concern. It is in this context that the Wall Monitoring System (WMS) - a software framework aimed at monitoring the health of the Wall components, was conceived. WMS has been divided into three parts: a) a pre-discharge power load analysis tool to check compatibility between plasma scenario and PFC's operational limits in terms of heat flux b) a real-time system during discharge, to take into account all necessary measurements involved in the PFCs protection c) a set of analysis tools that would be used post-discharge, that would access WEST database and compare predicted and experimental results. This paper presents an overview of PLATo - the pre-pulse module of WMS that has been recently developed under IPR-IRFM research collaboration. PLAto has two major components - one that produces heat flux information of the PFCS and the other that produces energy graphs depending on shot profile defined by time variant magnetic equilibrium and injected power profiles. Preliminary results will be presented based on foreseen WEST plasma reference scenarios. (author)

Engineering of Impulse Mechanism for Mechanical Hander Power Tools

Science.gov (United States)

Nikolaevich Drozdov, Anatoliy

2018-03-01

The solution to the problem of human security in cities should be considered on the basis of an integrated and multidisciplinary approach, including issues of security and ecology in the application of technical means used to ensure the viability and development of technocracy. In this regard, an important task is the creation of a safe technique with improved environmental properties with high technological characteristics. This primarily relates to mechanised tool — the division of technological machines with built in engines is that their weight is fully or partially perceived by the operator’s hands, making the flow and control of the car. For this subclass of machines is characterized by certain features: a built-in motor, perception of at least part of their weight by the operator during the work, the implementation of feeding and management at the expense of the muscular power of the operator. Therefore, among the commonly accepted technical and economic characteristics, machines in this case, important ergonomic (ergonomics), regulation of levels which ensures the safety of the operator. To ergonomics include vibration, noise characteristics, mass, and force feeding machine operator. Vibration is a consequence of the dynamism of the system operator machine - processed object (environment) in which the engine energy is redistributed among all the structures, causing their instability. In the machine vibration caused by technological and constructive (transformative mechanisms) unbalance of individual parts of the drive, the presence of technological and design (impact mechanisms) clearances and other reasons. This article describes a new design of impulse mechanism for hander power tools (wrenches, screwdrivers) with enhanced torque. The article substantiates a simulation model of dynamic compression process in an operating chamber during impact, provides simulation results and outlines further lines of research.

On the Analysis and Fault-Diagnosis Tools for Small-Scale Heat and Power Plants

Energy Technology Data Exchange (ETDEWEB)

Arriagada, Jaime

2003-12-01

The deregulation of the electricity market drives utilities and independent power producers to operate heat and power plants as profit centers. In order to keep the economic margins on the credit side, the preferred measures have been to improve the electrical efficiency through changes in the hardware and boost the overall efficiency through e.g. combined heat and power (CHP) generation. The better understanding of global environmental issues is also pushing the development toward more advanced power plant technology that at the introduction stage may represent a risky option for the plant owner. Recently, there is a growing interest in improving the plant operation instead, and therefore the focus has been put on aspects related to the RAM (reliability-availability-maintenance) of the plants. Small- and mid-scale CHP plants, especially natural gas- and biomass-fueled, have been identified to be important to satisfy the needs of the energy market and help to mitigate the environmental factors in the short- and middle-term. One of the major challenges that these types of plants will face is attaining good RAM at the same time that they cannot support big O and M costs and a lot of personnel. Therefore the implementation of cheap and reliable IT-based tools that help to achieve this goal is essential. Most power plants today are equipped with modern distributed control systems that through a considerable number of sensors deliver large amounts of data to the control room. This paves the way to the introduction of intelligent tools - derived from the artificial intelligence technology - such as artificial neural networks (ANNs) and genetic algorithms (GA). ANNs have a learning ability that makes them useful for the construction of powerful non-physical models based on data from the process, while GA has shown to be a robust optimization method based on the principle of the 'survival-of-the-fittest'. Principally ANNs, but also to a lesser extent GA, have

Beyond Jeopardy and Lectures: Using "Microsoft PowerPoint" as a Game Design Tool to Teach Science

Science.gov (United States)

Siko, Jason; Barbour, Michael; Toker, Sacip

2011-01-01

To date, research involving homemade PowerPoint games as an instructional tool has not shown statistically significant gains in student performance. This paper examines the results of a study comparing the performance of students in a high school chemistry course who created homemade PowerPoint games as a test review with the students who used a…

Perspectives for hydropower in Switzerland - The chances offered by Green Power

International Nuclear Information System (INIS)

Spreng, D.; Wuestenhagen, R.; Truffer, B.

2001-01-01

This report made for the Swiss Federal Office of Energy (SFOE) discusses the question if the marketing of 'green' power, i.e. by marketing power on the basis of its environment-friendly production method, could be a viable way for owners of hydropower plant to assert themselves in a liberalised electricity market. The results of the studies made so far concerning the size of the market for 'green power' are discussed and the various types of customer are looked at, such as environmentally conscious and environmentally active consumers for example. The report presents the results of 11 'focus groups' held in Berne, Zurich and Stuttgart which looked at the consumers' general opinion on green power and their readiness to pay a surcharge for it. The report examines not only the situation in households but also in trade and industry, where the purchase of green power can play a role in environmental certification or be used as part of a company's marketing strategy. Also, the issuing of 'green shares' (sustainable investments) is discussed, which could improve the financial conditions for hydropower companies seeking credit and loans

Development and verification of a software tool for the acoustic location of partial discharge in a power transformer

Directory of Open Access Journals (Sweden)

Polužanski Vladimir

2014-01-01

Full Text Available This paper discusses the development and verification of software tool for determining the location of partial discharge in a power transformer with the acoustic method. Classification and systematization of physical principles and detection methods and tests of partial discharge in power transformers are shown at the beginning of this paper. The most important mathematical models, features, algorithms, and real problems that affect measurement accuracy are highlighted. This paper describes the development and implementation of a software tool for determining the location of partial discharge in a power transformer based on a no iterative mathematical algorithm. Verification and accuracy of measurement are proved both by computer simulation and experimental results available in the literature.

The 'Environmental Manual for Power Development': a tool for GHG mitigation and cost analysis in developing countries

International Nuclear Information System (INIS)

Fritsche, Uwe R.; Liptow, Holger

1999-01-01

The Environmental Manual for Power Development (EM) is a computerised tool to include environmental and cost data into the decision-making for energy projects in developing countries. The EM is sponsored by German BMZ (Ministry for Economic Co-operation and Development), Dutch DGIS (Directorate General for International Co-operation), British DfID (Department for International Development), and the World Bank. The EM was developed by GTZ with scientific support from Oeko-Institut (Institute for applied ecology). The EM tracks down the emissions and costs of e.g. the existing power supply system in a country, region, or of a specific energy project, and compares those to alternative options to deliver the same energy service, e.g. electricity, or process heat, or transport services. To do so, the EM maintains a comprehensive database on environmental and cost impacts of energy technologies, and determines environmental impacts for life-cycles: All impacts from mining, transport, conversion etc. can be accounted for. To consistently handle all life-cycles, the EM database offers a variety of pre-defined fuel-and life-cycles to work with. The Em database covers generic energy technologies in developing countries, especially fossil-fueled electricity and heating systems, cogeneration, renewable energies, selected energy efficiency technologies, nuclear power systems, as well as data for upstream activities like mining, fuel benefication, transport, and emission control technologies like flue-gas desulfurisation, low-NO x burners, etc. The EM analyses and compares airborne and greenhouse gas emissions, solid wastes, and land use, as well as internal and external costs associated with investment and operation of energy technologies, including their life-cycle (upstream fuel-cycles, materials). The Em helps to check the compliance of energy processes with given emission standards - its database offers such standard for various countries and regions, and users can test if

ADVANCED POWER SYSTEMS ANALYSIS TOOLS

Energy Technology Data Exchange (ETDEWEB)

Robert R. Jensen; Steven A. Benson; Jason D. Laumb

2001-08-31

The use of Energy and Environmental Research Center (EERC) modeling tools and improved analytical methods has provided key information in optimizing advanced power system design and operating conditions for efficiency, producing minimal air pollutant emissions and utilizing a wide range of fossil fuel properties. This project was divided into four tasks: the demonstration of the ash transformation model, upgrading spreadsheet tools, enhancements to analytical capabilities using the scanning electron microscopy (SEM), and improvements to the slag viscosity model. The ash transformation model, Atran, was used to predict the size and composition of ash particles, which has a major impact on the fate of the combustion system. To optimize Atran key factors such as mineral fragmentation and coalescence, the heterogeneous and homogeneous interaction of the organically associated elements must be considered as they are applied to the operating conditions. The resulting model's ash composition compares favorably to measured results. Enhancements to existing EERC spreadsheet application included upgrading interactive spreadsheets to calculate the thermodynamic properties for fuels, reactants, products, and steam with Newton Raphson algorithms to perform calculations on mass, energy, and elemental balances, isentropic expansion of steam, and gasifier equilibrium conditions. Derivative calculations can be performed to estimate fuel heating values, adiabatic flame temperatures, emission factors, comparative fuel costs, and per-unit carbon taxes from fuel analyses. Using state-of-the-art computer-controlled scanning electron microscopes and associated microanalysis systems, a method to determine viscosity using the incorporation of grey-scale binning acquired by the SEM image was developed. The image analysis capabilities of a backscattered electron image can be subdivided into various grey-scale ranges that can be analyzed separately. Since the grey scale's intensity

Evaluating alternative offering strategies for wind producers in a pool

International Nuclear Information System (INIS)

Rahimiyan, Morteza; Morales, Juan M.; Conejo, Antonio J.

2011-01-01

Highlights: → Out-of-sample analysis allows comparing diverse offers using real-world data. → Offering the best production forecast is not optimal for a wind producer. → Stochastic programming offers lead to maximum expected profit. → Offering the best production forecast is not generally optimal for risk control. → Stochastic programming offers lead to the best tradeoff profit versus risk. -- Abstract: As wind power technology matures and reaches break-even cost, wind producers find it increasingly attractive to participate in pool markets instead of being paid feed-in tariffs. The key issue is then how a wind producer should offer in the pool markets to achieve maximum profit while controlling the variability of such profit. This paper compares two families of offering strategies based, respectively, on a naive use of wind production forecasts and on stochastic programming models. These strategies are compared through a comprehensive out-of-sample chronological analysis based on real-world data. A number of relevant conclusions are then duly drawn.

Methods of improvement of forecasting of development of mineral deposits' power supply

Directory of Open Access Journals (Sweden)

Alexander V. Putilov

2015-03-01

Full Text Available Mineral deposits (among which non-ferrous metals take a leading place are situated on the territory of our planet rather unevenly, and often in out-of-the-way places. Nuclear power (particularly, transportable nuclear power plants provides the new possibilities of power supply, which is very important for deposits' development. This article shares the economic aspects of forecasting in the field of power development (in particular, nuclear power on the basis of transportable nuclear power plants. Economic barriers of development of innovative nuclear technologies are considered on the example of transportable nuclear power plants. At the same time, there are given the ways of elimination of such barrier to development of this technology as methodical absence of investigation of a question of distribution of added cost between producers of innovative equipment and final product. Addition of new analytical tool (“business diagonal” is offered for a method of definition of economically efficient distribution of added cost (received as a result of introduction of innovative technologies between participants of production and consumption of atomic energy within the “economic cross” model. There is offered the order of use of method of cash flows discounting at calculations between nuclear market participants. Economic methods, offered in this article, may be used in forecasting of development of other energy technologies and introduction of prospective energy equipment.

An overview of course offered by the USA, UK and France to support Nuclear Power Program (NPP)

International Nuclear Information System (INIS)

Sheriffah Noor Khamseah Al-Idid Syed Ahmad Idid

2012-01-01

In her presentation, speaker address a topic on nuclear education that offered by USA, UK and France to support nuclear power program. Her presentation actually assist students that are willing to explore several courses related to nuclear energy and its application. The speaker also explained briefly the impact of major nuclear accidents such as Fukushima that can influence the participation of students to study in these fields. She also outlines several nuclear stake holders and also some activities to support nuclear application such as planning, research, engineering, environmental impact assessment and others. She also explain in detail the needs to develop human capital especially for this field. At the end of her lectures, she tried to suggest several recommendations so that the audients can use in order to review their own strategies and planning for future training and studies. (author)

Tools and tool application for the dismantling of the nuclear power plant Brennilis in France

International Nuclear Information System (INIS)

Bienia, Harald; Welbers, Philipp; Krueger, Peter; Noll, Thomas

2012-01-01

The EL-4 reactor in the NPP Brennilis in France is a CO2 cooled heavy water moderated test reactor with net power of 70 MW, the reactor started operation in 1967 and was decommissioned in 1985. Due to the construction features it was not necessary to enter the reactor area during operation, therefore the reactor pressure vessel and the surrounding piping systems are built in a very compact way. The dismantling procedures are therefore different from German BWR or PWR systems, the remote cutting and handling tools have to be adapted to the different features. Because of the high local dosage rate in the reactor hall it is also necessary to perform the erection of the dismantling equipment by robot systems. For cutting of the piping system a new plasma cutting technique, the hot wire method will be used. Other mechanical cutting techniques have to be used for instance for zircaloy containing components due to fire prevention purposes. The required time for tool and manipulator changes, including wearing part replacements constitute a significant part of the dismantling schedule. The suction/exhaust system for radioactive dust removal allowed a reduction of the total personal dose by one third of the allowed dose.

X Power Tools

CERN Document Server

Tyler, Chris

2008-01-01

This book puts you in charge of the most flexible and adaptable graphical interface in the computer industry. The X Window System underlies graphical desktops on Linux and Unix systems, and supports advanced features of modern graphics cards. This unique inside look at X gives you a lot of useful ways to harness the power of this system effectively.

In situ plasma diagnostics study of a commercial high-power hollow cathode magnetron deposition tool

International Nuclear Information System (INIS)

Meng Liang; Raju, Ramasamy; Flauta, Randolph; Shin, Hyungjoo; Ruzic, David N.; Hayden, Douglas B.

2010-01-01

Using a newly designed and built plasma diagnostic system, the plasma parameters were investigated on a commercial 200 mm high-power hollow cathode magnetron (HCM) physical vapor deposition tool using Ta target under argon plasma. A three dimensional (3D) scanning radio frequency (rf)-compensated Langmuir probe was constructed to measure the spatial distribution of the electron temperature (T e ) and electron density (n e ) in the substrate region of the HCM tool at various input powers (2-15 kW) and pressures (10-70 mTorr). The T e was in the range of 1-3 eV, scaling with decreasing power and decreasing pressure. Meanwhile, n e was in the range of 4x10 10 -1x10 12 cm -3 scaling with increasing power and decreasing pressure. As metal deposits on the probe during the probe measurements, a self-cleaning plasma cup was designed and installed in the chamber to clean the tungsten probe tip. However, its effectiveness in recovering the measured plasma parameters was hindered by the metal layer deposited on the insulating probe tube which was accounted for the variation in the plasma measurements. Using a quartz crystal microbalance combined with electrostatic filters, the ionization fraction of the metal flux was measured at various input power of 2-16 kW and pressure of 5-40 mTorr. The metal ionization fraction reduced significantly with the increasing input power and decreasing gas pressure which were attributed to the corresponding variation in the ionization cross section and the residence time of the sputtered atoms in the plasma, respectively. Both the metal neutral and ion flux increased at higher power and lower pressure. The 3D measurements further showed that the ionization fraction decreased when moving up from the substrate to the cathode.

CRISP. Simulation tool for fault detection and diagnostics in high-DG power networks

International Nuclear Information System (INIS)

Fontela, M.; Andrieu, C.; Raison, B.

2004-08-01

This document gives a description of a tool proposed for fault detection and diagnostics. The main principles of the functions of fault localization are described and detailed for a given MV network that will be used for the ICT experiment in Grenoble (experiment 3B). The aim of the tool is to create a technical, simple and realistic context for testing ICT dedicated to an electrical application. The tool gives the expected inputs and outputs contents of the various distributed ICT components when a fault occurs in a given MV network. So the requirements for the ICT components are given in term of expected data collected, analysed and transmitted. Several examples are given in order to illustrate the inputs/outputs in case of different faults. The tool includes a topology description which is a main aspect to develop in the future for managing the distribution network. Updating topology in real time will become necessary for fault diagnostic and protection, but also necessary for the various possible added applications (local market balance and local electrical power quality for instance). The tool gives a context and a simple view for the ICT components behaviours assuming an ideal response and transmission from them. The real characteristics and possible limitations for the ICT (information latency, congestion, security) will be established during the experiments from the same context described in the HTFD tool

Offers

CERN Multimedia

Staff Association

2012-01-01

L'Occitane en Provence proposes the following offer: 10 % discount on all products in all L'Occitane shops in Metropolitan France upon presentation of your Staff Association membership card and a valid ID. This offer is valid only for one person, is non-transferable and cannot be combined with other promotions.

Dynamic wind turbine models in power system simulation tool DIgSILENT

DEFF Research Database (Denmark)

Hansen, Anca Daniela; Iov, F.; Sørensen, Poul Ejnar

, connection of the wind turbine at different types of grid and storage systems. Different control strategies have been developed and implemented for these wind turbine concepts, their performance in normal or fault operation being assessed and discussed by means of simulations. The described control......This report presents a collection of models and control strategies developed and implemented in the power system simulation tool PowerFactory DIgSILENT for different wind turbine concepts. It is the second edition of Risø-R-1400(EN) and it gathers and describes a whole wind turbine model database...... of the interaction between the mechanical structure of the wind turbine and the electrical grid during different operational modes. The report provides thus a description of the wind turbines modelling, both at a component level and at a system level. The report contains both the description of DIgSILENT built...

Human performance tools in nuclear power plants. Introduction, implementation and experiences

International Nuclear Information System (INIS)

Dexheimer, Kai; Bassing, Gerd; Kreuzer, Peter

2015-01-01

The basis of safe nuclear power plant operation (NPP) and a strong safety culture is the professional application of Human Performance Optimisation Tools (HPO). HPO trainings have been carried out by German NPPs for a number of years and recently also by Swiss NPPs. This article describes the origination, the bases, experiences and thereby the special features of the HPO training programme applied by German NPP operators. Moreover, this article provides an outlook on future developments - in particular when considering the requirements of the ongoing phase out of nuclear energy in Germany.

Power spectra as a diagnostic tool in probing statistical/nonstatistical behavior in unimolecular reactions

Science.gov (United States)

Chang, Xiaoyen Y.; Sewell, Thomas D.; Raff, Lionel M.; Thompson, Donald L.

1992-11-01

The possibility of utilizing different types of power spectra obtained from classical trajectories as a diagnostic tool to identify the presence of nonstatistical dynamics is explored by using the unimolecular bond-fission reactions of 1,2-difluoroethane and the 2-chloroethyl radical as test cases. In previous studies, the reaction rates for these systems were calculated by using a variational transition-state theory and classical trajectory methods. A comparison of the results showed that 1,2-difluoroethane is a nonstatistical system, while the 2-chloroethyl radical behaves statistically. Power spectra for these two systems have been generated under various conditions. The characteristics of these spectra are as follows: (1) The spectra for the 2-chloroethyl radical are always broader and more coupled to other modes than is the case for 1,2-difluoroethane. This is true even at very low levels of excitation. (2) When an internal energy near or above the dissociation threshold is initially partitioned into a local C-H stretching mode, the power spectra for 1,2-difluoroethane broaden somewhat, but discrete and somewhat isolated bands are still clearly evident. In contrast, the analogous power spectra for the 2-chloroethyl radical exhibit a near complete absence of isolated bands. The general appearance of the spectrum suggests a very high level of mode-to-mode coupling, large intramolecular vibrational energy redistribution (IVR) rates, and global statistical behavior. (3) The appearance of the power spectrum for the 2-chloroethyl radical is unaltered regardless of whether the initial C-H excitation is in the CH2 or the CH2Cl group. This result also suggests statistical behavior. These results are interpreted to mean that power spectra may be used as a diagnostic tool to assess the statistical character of a system. The presence of a diffuse spectrum exhibiting a nearly complete loss of isolated structures indicates that the dissociation dynamics of the molecule will

Making Research Fly in Schools: "Drosophila" as a Powerful Modern Tool for Teaching Biology

Science.gov (United States)

Harbottle, Jennifer; Strangward, Patrick; Alnuamaani, Catherine; Lawes, Surita; Patel, Sanjai; Prokop, Andreas

2016-01-01

The "droso4schools" project aims to introduce the fruit fly "Drosophila" as a powerful modern teaching tool to convey curriculum-relevant specifications in biology lessons. Flies are easy and cheap to breed and have been at the forefront of biology research for a century, providing unique conceptual understanding of biology and…

Multiple testing corrections in quantitative proteomics: A useful but blunt tool.

Science.gov (United States)

Pascovici, Dana; Handler, David C L; Wu, Jemma X; Haynes, Paul A

2016-09-01

Multiple testing corrections are a useful tool for restricting the FDR, but can be blunt in the context of low power, as we demonstrate by a series of simple simulations. Unfortunately, in proteomics experiments low power can be common, driven by proteomics-specific issues like small effects due to ratio compression, and few replicates due to reagent high cost, instrument time availability and other issues; in such situations, most multiple testing corrections methods, if used with conventional thresholds, will fail to detect any true positives even when many exist. In this low power, medium scale situation, other methods such as effect size considerations or peptide-level calculations may be a more effective option, even if they do not offer the same theoretical guarantee of a low FDR. Thus, we aim to highlight in this article that proteomics presents some specific challenges to the standard multiple testing corrections methods, which should be employed as a useful tool but not be regarded as a required rubber stamp. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Information Technology Research Services: Powerful Tools to Keep Up with a Rapidly Moving Field

Science.gov (United States)

Hunter, Paul

2010-01-01

Marty firms offer Information Technology Research reports, analyst calls, conferences, seminars, tools, leadership development, etc. These entities include Gartner, Forrester Research, IDC, The Burton Group, Society for Information Management, 1nfoTech Research, The Corporate Executive Board, and so on. This talk will cover how a number of such services are being used at the Goddard Space Flight Center to improve our IT management practices, workforce skills, approach to innovation, and service delivery. These tools and services are used across the workforce, from the executive leadership to the IT worker. The presentation will cover the types of services each vendor provides and their primary engagement model. The use of these services at other NASA Centers and Headquarters will be included. In addition, I will explain how two of these services are available now to the entire NASA IT workforce through enterprise-wide subscriptions.

AR4VI: AR as an Accessibility Tool for People with Visual Impairments.

Science.gov (United States)

Coughlan, James M; Miele, Joshua

2017-10-01

Although AR technology has been largely dominated by visual media, a number of AR tools using both visual and auditory feedback have been developed specifically to assist people with low vision or blindness - an application domain that we term Augmented Reality for Visual Impairment (AR4VI). We describe two AR4VI tools developed at Smith-Kettlewell, as well as a number of pre-existing examples. We emphasize that AR4VI is a powerful tool with the potential to remove or significantly reduce a range of accessibility barriers. Rather than being restricted to use by people with visual impairments, AR4VI is a compelling universal design approach offering benefits for mainstream applications as well.

Internet-based tools for behaviour change

Energy Technology Data Exchange (ETDEWEB)

Bottrill, Catherine [Environmental Change Inst., Oxford Unversity Centre for the Environment (United Kingdom)

2007-07-01

Internet-based carbon calculators have the potential to be powerful tools for helping people to understand their personal energy use derived from fossil fuels and to take action to reduce the related carbon emissions. This paper reviews twenty-three calculators concluding that in most cases this environmental learning tool is falling short of giving people the ability to accurately monitor their energy use; to receive meaningful feedback and guidance for altering their energy use; or to connect with others also going through the same learning process of saving energy and conserving carbon. This paper presents the findings of research into the accuracy and effectiveness of carbon calculators. Based on the assessment of the calculators the paper discusses the opportunities Internet technology could be offering for engagement, communication, encouragement and guidance on low-carbon lifestyle choices. Finally, recommendations are made for the development of accurate, informative and social Internet-based carbon calculators.

Google Maps offers a new way to evaluate claudication.

Science.gov (United States)

Khambati, Husain; Boles, Kim; Jetty, Prasad

2017-05-01

Accurate determination of walking capacity is important for the clinical diagnosis and management plan for patients with peripheral arterial disease. The current "gold standard" of measurement is walking distance on a treadmill. However, treadmill testing is not always reflective of the patient's natural walking conditions, and it may not be fully accessible in every vascular clinic. The objective of this study was to determine whether Google Maps, the readily available GPS-based mapping tool, offers an accurate and accessible method of evaluating walking distances in vascular claudication patients. Patients presenting to the outpatient vascular surgery clinic between November 2013 and April 2014 at the Ottawa Hospital with vasculogenic calf, buttock, and thigh claudication symptoms were identified and prospectively enrolled in our study. Onset of claudication symptoms and maximal walking distance (MWD) were evaluated using four tools: history; Walking Impairment Questionnaire (WIQ), a validated claudication survey; Google Maps distance calculator (patients were asked to report their daily walking routes on the Google Maps-based tool runningmap.com, and walking distances were calculated accordingly); and treadmill testing for onset of symptoms and MWD, recorded in a double-blinded fashion. Fifteen patients were recruited for the study. Determination of walking distances using Google Maps proved to be more accurate than by both clinical history and WIQ, correlating highly with the gold standard of treadmill testing for both claudication onset (r = .805; P Google Maps tool was also efficient, with reporting times averaging below 4 minutes. For vascular claudicants with no other walking limitations, Google Maps is a promising new tool that combines the objective strengths of the treadmill test and incorporates real-world walking environments. It offers an accurate, efficient, inexpensive, and readily accessible way to assess walking distances in patients with

Synchrotron light sources: A powerful tool for science and technology

International Nuclear Information System (INIS)

Schlachter, F.; Robinson, A.

1996-01-01

A new generation of synchrotron light sources is producing extremely bright beams of vacuum-ultraviolet and x-ray radiation, poweful new tools for research in a wide variety of basic and applied sciences. Spectromicroscopy using high spectral and spatial resolution is a new way of seeing, offering many opportunities in the study of matter. Development of a new light source provides the country or region of the world in which the light source is located many new opportunities: a focal point for research in many scientific and technological areas, a means of upgrading the technology infrastructure of the country, a means of training students, and a potential service to industry. A light source for Southeast Asia would thus be a major resource for many years. Scientists and engineers from light sources around the world look forward to providing assistance to make this a reality in Southeast Asia

Strategic wind power trading considering rival wind power production

DEFF Research Database (Denmark)

Exizidis, Lazaros; Kazempour, Jalal; Pinson, Pierre

2016-01-01

In an electricity market with high share of wind power, it is expected that wind power producers may exercise market power. However, wind producers have to cope with wind’s uncertain nature in order to optimally offer their generation, whereas in a market with more than one wind producers, uncert...... depending on the rival’s wind generation, given that its own expected generation is not high. Finally, as anticipated, expected system cost is higher when both wind power producers are expected to have low wind power generation......In an electricity market with high share of wind power, it is expected that wind power producers may exercise market power. However, wind producers have to cope with wind’s uncertain nature in order to optimally offer their generation, whereas in a market with more than one wind producers......, uncertainty of rival wind power generation should also be considered. Under this context, this paper addresses the impact of rival wind producers on the offering strategy and profits of a pricemaker wind producer. A stochastic day-ahead market setup is considered, which optimizes the day-ahead schedules...

Offers

CERN Multimedia

Staff Association

2011-01-01

Special offers for our members       Go Sport in Val Thoiry is offering 15% discount on all purchases made in the shop upon presentation of the Staff Association membership card (excluding promotions, sale items and bargain corner, and excluding purchases using Go Sport  and Kadéos gift cards. Only one discount can be applied to each purchase).  

Microfluidics as a functional tool for cell mechanics.

Science.gov (United States)

Vanapalli, Siva A; Duits, Michel H G; Mugele, Frieder

2009-01-05

Living cells are a fascinating demonstration of nature's most intricate and well-coordinated micromechanical objects. They crawl, spread, contract, and relax-thus performing a multitude of complex mechanical functions. Alternatively, they also respond to physical and chemical cues that lead to remodeling of the cytoskeleton. To understand this intricate coupling between mechanical properties, mechanical function and force-induced biochemical signaling requires tools that are capable of both controlling and manipulating the cell microenvironment and measuring the resulting mechanical response. In this review, the power of microfluidics as a functional tool for research in cell mechanics is highlighted. In particular, current literature is discussed to show that microfluidics powered by soft lithographic techniques offers the following capabilities that are of significance for understanding the mechanical behavior of cells: (i) Microfluidics enables the creation of in vitro models of physiological environments in which cell mechanics can be probed. (ii) Microfluidics is an excellent means to deliver physical cues that affect cell mechanics, such as cell shape, fluid flow, substrate topography, and stiffness. (iii) Microfluidics can also expose cells to chemical cues, such as growth factors and drugs, which alter their mechanical behavior. Moreover, these chemical cues can be delivered either at the whole cell or subcellular level. (iv) Microfluidic devices offer the possibility of measuring the intrinsic mechanical properties of cells in a high throughput fashion. (v) Finally, microfluidic methods provide exquisite control over drop size, generation, and manipulation. As a result, droplets are being increasingly used to control the physicochemical environment of cells and as biomimetic analogs of living cells. These powerful attributes of microfluidics should further stimulate novel means of investigating the link between physicochemical cues and the biomechanical

Optimal sharing of quantity risk for a coalition of wind power producers facing nodal prices

KAUST Repository

Bitar, E. Y.; Baeyens, E.; Khargonekar, P. P.; Poolla, K.; Varaiya, P.

2012-01-01

It is widely accepted that aggregation of geographically diverse wind energy resources offers compelling potential to mitigate wind power variability, as wind speed at different geographic locations tends to decorrelate with increasing spatial separation. In this paper, we explore the extent to which a coalition of wind power producers can exploit the statistical benefits of aggregation to mitigate the risk of quantity shortfall with respect to forward contract offerings for energy. We propose a simple augmentation of the existing two-settlement market system with nodal pricing to permit quantity risk sharing among wind power producers by affording the group a recourse opportunity to utilize improved forecasts of their ensuing wind energy production to collectively modify their forward contracted positions so as to utilize the projected surplus in generation at certain buses to balance the projected shortfall in generation at complementary buses. Working within this framework, we show that the problem of optimally sizing a set of forward contracts for a group of wind power producers reduces to convex programming and derive closed form expressions for the set of optimal recourse policies. We also asses the willingness of individual wind power producers to form a coalition to cooperatively offer contracts for energy. We first show that the expected profit derived from coalitional contract offerings with recourse is greater than that achievable through independent contract offerings. And, using tools from coalitional game theory, we show that the core for our game is non-empty.

Optimal sharing of quantity risk for a coalition of wind power producers facing nodal prices

KAUST Repository

Bitar, E. Y.

2012-06-01

It is widely accepted that aggregation of geographically diverse wind energy resources offers compelling potential to mitigate wind power variability, as wind speed at different geographic locations tends to decorrelate with increasing spatial separation. In this paper, we explore the extent to which a coalition of wind power producers can exploit the statistical benefits of aggregation to mitigate the risk of quantity shortfall with respect to forward contract offerings for energy. We propose a simple augmentation of the existing two-settlement market system with nodal pricing to permit quantity risk sharing among wind power producers by affording the group a recourse opportunity to utilize improved forecasts of their ensuing wind energy production to collectively modify their forward contracted positions so as to utilize the projected surplus in generation at certain buses to balance the projected shortfall in generation at complementary buses. Working within this framework, we show that the problem of optimally sizing a set of forward contracts for a group of wind power producers reduces to convex programming and derive closed form expressions for the set of optimal recourse policies. We also asses the willingness of individual wind power producers to form a coalition to cooperatively offer contracts for energy. We first show that the expected profit derived from coalitional contract offerings with recourse is greater than that achievable through independent contract offerings. And, using tools from coalitional game theory, we show that the core for our game is non-empty.

Intelligent Electric Power Systems with Active-Adaptive Electric Networks: Challenges for Simulation Tools

Directory of Open Access Journals (Sweden)

Ufa Ruslan A.

2015-01-01

Full Text Available The motivation of the presented research is based on the needs for development of new methods and tools for adequate simulation of intelligent electric power systems with active-adaptive electric networks (IES including Flexible Alternating Current Transmission System (FACTS devices. The key requirements for the simulation were formed. The presented analysis of simulation results of IES confirms the need to use a hybrid modelling approach.

Understanding the managerial state: a few theoretical tools

Directory of Open Access Journals (Sweden)

Iana Gomes de Lima

2012-06-01

Full Text Available This article offers theoretical tools to the analysis of the state and contemporary public policies, with special attention to educational policies. Utilizing mainly the contribution of John Clarke and Janet Newman and adding the concepts used by Michael Apple and Stephen Ball, this article offer theoretical lenses to theexamination of the managerial nature of the contemporary state. Through the dispersal of power, the blurring of the borders between public and private and assessment policies that control the action of public institutions, the managerial state fi ghts the Welfare State and creates the conditions to public policies that reshape the relationship between civil society and the state. The article ends with some implications to the study of educational policies, emphasizing the fact that the managerial logic does not transfer, unmediated, to all state actions.

Availability of websites offering to sell psilocybin spores and psilocybin.

Science.gov (United States)

Lott, Jason P; Marlowe, Douglas B; Forman, Robert F

2009-09-01

This study assesses the availability of websites offering to sell psilocybin spores and psilocybin, a powerful hallucinogen contained in Psilocybe mushrooms. Over a 25-month period beginning in March 2003, eight searches were conducted in Google using the term "psilocybin spores." In each search the first 100 nonsponsored links obtained were scored by two independent raters according to standardized criteria to determine whether they offered to sell psilocybin or psilocybin spores. No attempts were made to procure the products offered for sale in order to ascertain whether the marketed psilocybin was in fact "genuine" or "counterfeit." Of the 800 links examined, 58% led to websites offering to sell psilocybin spores. Additionally, evidence that whole Psilocybe mushrooms are offered for sale online was obtained. Psilocybin and psilocybin spores were found to be widely available for sale over the Internet. Online purchase of psilocybin may facilitate illicit use of this potent psychoactive substance. Additional studies are needed to assess whether websites offering to sell psilocybin and psilocybin spores actually deliver their products as advertised.

Increase of Power System Survivability with the Decision Support Tool CRIPS Based on Network Planning and Simulation Program PSS®SINCAL

Science.gov (United States)

Schwaegerl, Christine; Seifert, Olaf; Buschmann, Robert; Dellwing, Hermann; Geretshuber, Stefan; Leick, Claus

The increased interconnection and automation of critical infrastructures enlarges the complexity of the dependency structures and - as consequence - the danger of cascading effects, e.g. causing area-wide blackouts in power supply networks that are currently after deregulation operated closer to their limits. New tools or an intelligent combination of existing approaches are required to increase the survivability of critical infrastructures. Within the IRRIIS project the expert system CRIPS was developed based on network simulations realised with PSS®SINCAL, an established tool to support the analysis and planning of electrical power, gas, water or heat networks. CRIPS assesses the current situation in power supply networks analysing the simulation results of the physical network behaviour and recommends corresponding decisions.

A comparative study of using spindle motor power and eddy current for the detection of tool conditions in milling processes

OpenAIRE

Abbass, JK; Al-Habaibeh, A

2015-01-01

This paper investigates the use of the power of the driving motor of a CNC spindle in comparison to two perpendicular eddy current sensors for the detection of tool wear in milling processes. Monitoring the power through the current profile is a low cost system which has been utilised in this study as an attempt to detect the fluctuation in the motor load as a result of the conditions of the cutting tool. Eddy current sensors are dedicated sensors that are installed on the spindle to measure ...

production-distribution of the electric power in France and in the regions in 2005 and 2006

International Nuclear Information System (INIS)

2008-01-01

This report presents the main statistical results available on the electric power production and the electricity transport and distribution. In a context of the european market deregulation, these data are very useful. They offer a tool to the government in favor of the the energy supply. They present a detailed description of the electric power park by each production channel (cogeneration, renewable energies...) and and by areas. (A.L.B.)

Interesting tools for the cybersecurity plan of a nuclear power plant; Herramientas de utilidad para el plan de Ciberseguridad de una Planta Nuclear

Energy Technology Data Exchange (ETDEWEB)

Pareja, I.; Carrasco, J. A.; Cerro, F. J. del

2012-07-01

The use of digital technologies in monitoring and control systems of nuclear power plants and their connectivity requirements, originate cybersecurity difficulties that should be addressed in a cybersecurity plan. This plan should guide the policies and procedures followed during the design maintenance and operation of the systems inside a nuclear power plant. It also should refer to adequate tools able to reach the established cybersecurity requirements. The combination of Datadiodes and tools for publishing video (like tVGA2web), permit an isolation and remote maintenance in a 100% safety way and their use should be disseminated. In the paper other type of tools useful for nuclear power plants are also mentioned.

Collision-Induced Dissociation Mass Spectrometry: A Powerful Tool for Natural Product Structure Elucidation.

Science.gov (United States)

Johnson, Andrew R; Carlson, Erin E

2015-11-03

Mass spectrometry is a powerful tool in natural product structure elucidation, but our ability to directly correlate fragmentation spectra to these structures lags far behind similar efforts in peptide sequencing and proteomics. Often, manual data interpretation is required and our knowledge of the expected fragmentation patterns for many scaffolds is limited, further complicating analysis. Here, we summarize advances in natural product structure elucidation based upon the application of collision induced dissociation fragmentation mechanisms.

The 'Environmental Manual for Power Development': a tool for GHG mitigation and cost analysis in developing countries

Energy Technology Data Exchange (ETDEWEB)

Fritsche, Uwe R. [Oeko-Institut, Energy Div., Darmstadt (Germany); Liptow, Holger [Deutsche Gesellschaft fuer Technische Zusammenarbeit GmbH (GTZ), Climate Change Programme, Eschborn (Germany)

1999-07-01

The Environmental Manual for Power Development (EM) is a computerised tool to include environmental and cost data into the decision-making for energy projects in developing countries. The EM is sponsored by German BMZ (Ministry for Economic Co-operation and Development), Dutch DGIS (Directorate General for International Co-operation), British DfID (Department for International Development), and the World Bank. The EM was developed by GTZ with scientific support from Oeko-Institut (Institute for applied ecology). The EM tracks down the emissions and costs of e.g. the existing power supply system in a country, region, or of a specific energy project, and compares those to alternative options to deliver the same energy service, e.g. electricity, or process heat, or transport services. To do so, the EM maintains a comprehensive database on environmental and cost impacts of energy technologies, and determines environmental impacts for life-cycles: All impacts from mining, transport, conversion etc. can be accounted for. To consistently handle all life-cycles, the EM database offers a variety of pre-defined fuel-and life-cycles to work with. The Em database covers generic energy technologies in developing countries, especially fossil-fueled electricity and heating systems, cogeneration, renewable energies, selected energy efficiency technologies, nuclear power systems, as well as data for upstream activities like mining, fuel benefication, transport, and emission control technologies like flue-gas desulfurisation, low-NO{sub x} burners, etc. The EM analyses and compares airborne and greenhouse gas emissions, solid wastes, and land use, as well as internal and external costs associated with investment and operation of energy technologies, including their life-cycle (upstream fuel-cycles, materials). The Em helps to check the compliance of energy processes with given emission standards - its database offers such standard for various countries and regions, and users can

Control and stimulation tools (cat) for the PC modelers

International Nuclear Information System (INIS)

Chan, K.S.; Lea, K.C.

1990-01-01

For the last couple of years, the personal computer technology has received a steady stream of improvement in CPU processing power, fast floating coprocessor, super graphics to a very large and fast hard drive. Since Intel began shipping its 80386 version of CPU, it became practical to develop or execute a substantial amount of power plant software on a personal computer. With the introduction of the RISC type personal workstation, complete simulators based on these new generation of computers will soon become a reality. As of today, although almost anybody can afford a personal computer, simulation supporting software is still rare or non-existent at all. The CAST has been designed to support those users who want to develop or debug large power plant simulation programs on a personal computer or workstation. Another separate paper will also be presented to demonstrate the real world development and debugging tools offered by CAST

Atomic Force Microscopy: A Powerful Tool to Address Scaffold Design in Tissue Engineering.

Science.gov (United States)

Marrese, Marica; Guarino, Vincenzo; Ambrosio, Luigi

2017-02-13

Functional polymers currently represent a basic component of a large range of biological and biomedical applications including molecular release, tissue engineering, bio-sensing and medical imaging. Advancements in these fields are driven by the use of a wide set of biodegradable polymers with controlled physical and bio-interactive properties. In this context, microscopy techniques such as Atomic Force Microscopy (AFM) are emerging as fundamental tools to deeply investigate morphology and structural properties at micro and sub-micrometric scale, in order to evaluate the in time relationship between physicochemical properties of biomaterials and biological response. In particular, AFM is not only a mere tool for screening surface topography, but may offer a significant contribution to understand surface and interface properties, thus concurring to the optimization of biomaterials performance, processes, physical and chemical properties at the micro and nanoscale. This is possible by capitalizing the recent discoveries in nanotechnologies applied to soft matter such as atomic force spectroscopy to measure surface forces through force curves. By tip-sample local interactions, several information can be collected such as elasticity, viscoelasticity, surface charge densities and wettability. This paper overviews recent developments in AFM technology and imaging techniques by remarking differences in operational modes, the implementation of advanced tools and their current application in biomaterials science, in terms of characterization of polymeric devices in different forms (i.e., fibres, films or particles).

Atomic Force Microscopy: A Powerful Tool to Address Scaffold Design in Tissue Engineering

Directory of Open Access Journals (Sweden)

Marica Marrese

2017-02-01

Full Text Available Functional polymers currently represent a basic component of a large range of biological and biomedical applications including molecular release, tissue engineering, bio-sensing and medical imaging. Advancements in these fields are driven by the use of a wide set of biodegradable polymers with controlled physical and bio-interactive properties. In this context, microscopy techniques such as Atomic Force Microscopy (AFM are emerging as fundamental tools to deeply investigate morphology and structural properties at micro and sub-micrometric scale, in order to evaluate the in time relationship between physicochemical properties of biomaterials and biological response. In particular, AFM is not only a mere tool for screening surface topography, but may offer a significant contribution to understand surface and interface properties, thus concurring to the optimization of biomaterials performance, processes, physical and chemical properties at the micro and nanoscale. This is possible by capitalizing the recent discoveries in nanotechnologies applied to soft matter such as atomic force spectroscopy to measure surface forces through force curves. By tip-sample local interactions, several information can be collected such as elasticity, viscoelasticity, surface charge densities and wettability. This paper overviews recent developments in AFM technology and imaging techniques by remarking differences in operational modes, the implementation of advanced tools and their current application in biomaterials science, in terms of characterization of polymeric devices in different forms (i.e., fibres, films or particles.

Nano Superconducting Quantum Interference device: A powerful tool for nanoscale investigations

Energy Technology Data Exchange (ETDEWEB)

Granata, Carmine, E-mail: carmine.granata@cnr.it; Vettoliere, Antonio

2016-02-19

The magnetic sensing at nanoscale level is a promising and interesting research topic of nanoscience. Indeed, magnetic imaging is a powerful tool for probing biological, chemical and physical systems. The study of small spin cluster, like magnetic molecules and nanoparticles, single electron, cold atom clouds, is one of the most stimulating challenges of applied and basic research of the next years. In particular, the magnetic nanoparticle investigation plays a fundamental role for the modern material science and its relative technological applications like ferrofluids, magnetic refrigeration and biomedical applications, including drug delivery, hyper-thermia cancer treatment and magnetic resonance imaging contrast-agent. Actually, one of the most ambitious goals of the high sensitivity magnetometry is the detection of elementary magnetic moment or spin. In this framework, several efforts have been devoted to the development of a high sensitivity magnetic nanosensor pushing sensing capability to the individual spin level. Among the different magnetic sensors, Superconducting QUantum Interference Devices (SQUIDs) exhibit an ultra high sensitivity and are widely employed in numerous applications. Basically, a SQUID consists of a superconducting ring (sensitive area) interrupted by two Josephson junctions. In the recent years, it has been proved that the magnetic response of nano-objects can be effectively measured by using a SQUID with a very small sensitive area (nanoSQUID). In fact, the sensor noise, expressed in terms of the elementary magnetic moment (spin or Bohr magneton), is linearly dependent on the SQUID loop side length. For this reason, SQUIDs have been progressively miniaturized in order to improve the sensitivity up to few spin per unit of bandwidth. With respect to other techniques, nanoSQUIDs offer the advantage of direct measurement of magnetization changes in small spin systems. In this review, we focus on nanoSQUIDs and its applications. In

Lifetime prediction of high-power press-pack IGBTs in wind power applications

DEFF Research Database (Denmark)

Busca, Cristian

The Wind Turbine (WT) industry is advancing at a rapid pace and the power rating of new WTs is continuously growing. The next generation large WTs are likely to be realized with full-scale power converters due to the advantages they offer in terms of grid code compliance, power density and decoup......The Wind Turbine (WT) industry is advancing at a rapid pace and the power rating of new WTs is continuously growing. The next generation large WTs are likely to be realized with full-scale power converters due to the advantages they offer in terms of grid code compliance, power density...... and decoupling of the generator and grid sides. Press-Pack (PP) Insulated Gate Bipolar Transistors (IGBTs) are promising semiconductor devices for the next generation large WTs due to the advantages they offer in terms of power capability, power density and thermal cycling capability. PP IGBTs require proper...

The dehistorization of the exercise of capitalist power and communicative domination in a cultural war

Directory of Open Access Journals (Sweden)

Yelina Gómez Martínez

2013-12-01

Full Text Available This paper offers a theoretical and methodological proposal that focuses on the articulation between dehistorization of the exercise of capitalist power and communicative domination to be found in cultural models absorbed by individuals under the present capitalist hegemony. The analysis is built upon the studies of communication that deal with the relations between power and modes of domination, using semiotics of culture as a tool, and demonstrate the existence of a tendency, at a global level, of certain characteristics with regards to interaction between imperialist power and communication.

Evidentiary Power and Propriety of Digital Identifiers and the Impact on Privacy Rights in the United States

OpenAIRE

Michael Losavio; Deborah Keeling

2014-01-01

Media and network systems capture and store data about electronic activity in new, sometimes unprecedented ways; computational systems make for new means of analysis and knowledge development. These new forms offer new, powerful tactical tools for investigations of electronic malfeasance under traditional legal regulation of state power, particular that of Fourth Amendment limitations on police searches and seizures under the U.S. Constitution. But autonomy, identity and authenticity concerns...

Design and analysis of solar thermoelectric power generation system

Science.gov (United States)

Vatcharasathien, Narong; Hirunlabh, Jongjit; Khedari, Joseph; Daguenet, Michel

2005-09-01

This article reports on the design and performance analysis of a solar thermoelectric power generation plant (STEPG). The system considers both truncated compound parabolic collectors (CPCs) with a flat receiver and conventional flat-plate collectors, thermoelectric (TE) cooling and power generator modules and appropriate connecting pipes and control devices. The design tool uses TRNSYS IIsibat-15 program with a new component we developed for the TE modules. The main input data of the system are the specifications of TE module, the maximum hot side temperature of TE modules, and the desired power output. Examples of the design using truncated CPC and flat-plate collectors are reported and discussed for various slope angle and half-acceptance angle of CPC. To minimize system cost, seasonal adjustment of the slope angle between 0° and 30° was considered, which could give relatively high power output under Bangkok ambient condition. Two small-scale STEPGs were built. One of them uses electrical heater, whereas the other used a CPC with locally made aluminum foil reflector. Measured data showed reasonable agreement with the model outputs. TE cooling modules were found to be more appropriate. Therefore, the TRNSYS software and the developed TE component offer an extremely powerful tool for the design and performance analysis of STEPG plant.

Turkish Soft Power: The Phenomenon Of “Soap Power” As A Tool Of Cultural Diplomacy

Directory of Open Access Journals (Sweden)

Алёна Игоревна Зубкова

2015-12-01

Full Text Available The article discusses the phenomenon of Turkish soap operas as a tool of soft power. The author analyzed the character, scope and limits of this phenomenon, primarily regarding the case of the Middle East countries and societies. The article covers the process of dissemination and implementation of the ideas of neo-Ottomanism as the foreign policy concept through applying the soft power strategy. Following the results of the research, the conclusion has been made regarding the negative and positive effects of this phenomenon on various spheres, as well as in the context of Turkish foreign policy.

Nuclear-related training and education offered by nonacademic organizations (preliminary)

International Nuclear Information System (INIS)

Howard, L.

1981-11-01

The results of a survey of nuclear-related training and education provided by nonacademic training organizations are presented in this report. The survey instrument was distributed by the Institute of Nuclear Power Operations to 136 training organizations. The scope of the survey was not intended to be comprehensive, but rather to include the primary sources of nonacademic nuclear-related training and education offered to utility personnel. The survey universe was compiled from training organizations listed in the 1981 Nuclear News Buyer's Guide. Forty-three percent of the survey population (59 organizations) responded to the questionnaire of which 31 percent (42) reported they offered nuclear-related training programs and 12 percent (17) reported they did not offer any nuclear-related training

Offers

CERN Multimedia

Staff Association

2014-01-01

New offers : Discover the theater Galpon in Geneva. The Staff Association is happy to offer to its members a discount of 8.00 CHF on a full-price ticket (tickets of 15.00 CHF instead of 22.00 CHF) so do not hesitate anymore (mandatory reservation by phone + 4122 321  21 76 as tickets are quickly sold out!). For further information, please see our website: http://staff-association.web.cern.ch/fr/content/th%C3%A9%C3%A2tre-du-galpon  

Your company's history as a leadership tool.

Science.gov (United States)

Seaman, John T; Smith, George David

2012-12-01

When the history of an organization comes up, it's usually in connection with an anniversary--just part of the "balloons and fireworks" (as one business leader characterized his company's bicentennial celebration, knowing that the investment of time and money would have little staying power). A fast-changing world leaves little time for nostalgia and irrelevant details--or, worse, strategies for winning the last war. But the authors, business historians at the Winthrop Group, assert that leaders with no patience for history are missing a vital truth: A sophisticated understanding of the past is one of the most powerful tools they have for shaping the future. The job of leaders, most would agree, is to inspire collective efforts and devise smart strategies for the future. History can be profitably employed on both fronts. As a leader strives to get people working together productively, communicating the history of the enterprise can instill a sense of identity and purpose and suggest the goals that will resonate. In its most familiar form, as a narrative about the past, history is a rich explanatory tool with which executives can make a case for change and motivate people to overcome challenges. Taken to a higher level, it also serves as a potent problem-solving tool, one that offers pragmatic insights, valid generalizations, and meaningful perspectives--a way to cut through management fads and the noise of the moment to what really matters.

Direct writing of metal nanostructures: lithographic tools for nanoplasmonics research.

Science.gov (United States)

Leggett, Graham J

2011-03-22

Continued progress in the fast-growing field of nanoplasmonics will require the development of new methods for the fabrication of metal nanostructures. Optical lithography provides a continually expanding tool box. Two-photon processes, as demonstrated by Shukla et al. (doi: 10.1021/nn103015g), enable the fabrication of gold nanostructures encapsulated in dielectric material in a simple, direct process and offer the prospect of three-dimensional fabrication. At higher resolution, scanning probe techniques enable nanoparticle particle placement by localized oxidation, and near-field sintering of nanoparticulate films enables direct writing of nanowires. Direct laser "printing" of single gold nanoparticles offers a remarkable capability for the controlled fabrication of model structures for fundamental studies, particle-by-particle. Optical methods continue to provide a powerful support for research into metamaterials.

Special offers

CERN Multimedia

Staff Association

2011-01-01

Are you a member of the Staff Association? Did you know that as a member you can benefit from the following special offers: BCGE (Banque Cantonale de Genève): personalized banking solutions with preferential conditions. TPG: reduced rates on annual transport passes for active and retired staff. Aquaparc: reduced ticket prices for children and adults at this Swiss waterpark in Le Bouveret. FNAC: 5% reduction on FNAC vouchers. For more information about all these offers, please consult our web site: http://association.web.cern.ch/association/en/OtherActivities/Offers.html

A remote control system to offer information for nuclear power plant operation

International Nuclear Information System (INIS)

Ohga, Yukiharu; Yuchi, Hiroyuki; Arita, Setsuo

1995-01-01

A new man-machine system was proposed to simplify input operation so as to get needed plant information and to control information items and output devices for the operator crew, working in a control room. The system controls the shared information for the operator crew, on a large screen display, and private information for individual operators and maintenance personnel, on CRTs, based on the speech input and remote pointing input to the large screen display by a portable pointer, which emits laser beams. The system recognizes the indicating point of the pointer beam by processing the image on the large screen as obtained by an ITV camera. An infrared laser beam and a camera with a visible ray cut filter are used to remove distortion of the image caused by lens aberration, etc. and to provide rapid image processing. The operator performs the input operation while monitoring a cursor displayed by the system. The information items offered and their output devices are automatically determined according to the input operator. A prototype system was developed using three CRTs, one of which served as a substitute for the large screen display. Input to the system is performed using a speech input device and three kinds of pointers; each pointer is identified during image processing based on the number of laser beams emitted. The evaluation test confirmed that precise and smooth input by pointers as well as arbitrary combinations with speech input realized natural dialog without being aware of any waiting time. The appropriate information items were offered to output devices, CRTs and the speech output device, according to the pointers used, namely the input operators. The system can simplify input operation and effectively control the offered information items and output devices in a plant control room. (author)

Tool and its management for nuclear power plant

International Nuclear Information System (INIS)

Yan Rui

2000-01-01

The tool and its management are a necessary part for the operation and maintenance of NPP.And NPP tool management is,in fact.a process of study, allocation, development, procurement, utilization, decontamination and scrap of the tools needed in the operation and outage, and also includes the organization, coordination and control of the whole process. NPP shall strengthen the scientific management of the process from procurement to scrap. According to its scale and characteristics, NPP may, implement unified and centralized management policy, establish necessary tool management organization, define the responsibilities of the management departments, make relevant management regulations and perfect tool quality assurance system to bring the tools into full play.Furthermore, the development and application of special management software provides a quite efficient means for the realization of scientific management of tools in NPP

Human performance tools in nuclear power plants. Introduction, implementation and experiences; Human Performance Tools in Kernkraftwerken. Einfuehrung, Umsetzung und Erfahrungen

Energy Technology Data Exchange (ETDEWEB)

Dexheimer, Kai; Bassing, Gerd [Dexcon Consulting GmbH, Neuhausen (Switzerland); Kreuzer, Peter [E.ON Kernkraft GmbH, Essenbach (Germany). Kernkraftwerk Isar

2015-06-01

The basis of safe nuclear power plant operation (NPP) and a strong safety culture is the professional application of Human Performance Optimisation Tools (HPO). HPO trainings have been carried out by German NPPs for a number of years and recently also by Swiss NPPs. This article describes the origination, the bases, experiences and thereby the special features of the HPO training programme applied by German NPP operators. Moreover, this article provides an outlook on future developments - in particular when considering the requirements of the ongoing phase out of nuclear energy in Germany.

Selection and impedance based model of a lithium ion battery technology for integration with virtual power plant

DEFF Research Database (Denmark)

Swierczynski, Maciej Jozef; Stroe, Daniel Ioan; Stan, Ana-Irina

2013-01-01

is to integrate lithium-ion batteries into virtual power plants; thus, the power system stability and the energy quality can be increased. The selection of the best lithium-ion battery candidate for integration with wind power plants is a key aspect for the economic feasibility of the virtual power plant...... investment. This paper presents a methodology for selection, between three candidates, of a Li-ion battery which offers long cycle lifetime at partial charge/discharge (required by many grid support applications) while providing a low cost per cycle also. For the selected Li-ion battery an impedance......-based diagnostic tool for lifetime estimation was developed and verified. This diagnostic tool can be extended into an impedance-based lifetime model that will be able to predict the remaining useful lifetime of Li-ion batteries for specific grid support applications....

Special Offers

CERN Multimedia

Association du personnel

2011-01-01

Walibi Rhône-Alpes is open until 31 October. Reduced prices for children and adults at this French attraction park in Les Avenières. For more information about all these offers, please consult our web site: http://association.web.cern.ch/association/en/OtherActivities/Offers.html

Special Offers

CERN Multimedia

Association du personnel

2011-01-01

Are you a member of the Staff Association? Did you know that as a member you can benefit from the following special offers: BCGE (Banque Cantonale de Genève): personalized banking solutions with preferential conditions. TPG: reduced rates on annual transport passes for active and retired staff. Aquaparc: reduced ticket prices for children and adults at this Swiss waterpark in Le Bouveret. Walibi: reduced prices for children and adults at this French attraction park in Les Avenières. FNAC: 5% reduction on FNAC vouchers. For more information about all these offers, please consult our web site: http://association.web.cern.ch/association/en/OtherActivities/Offers.html

What can management theories offer evidence-based practice? A comparative analysis of measurement tools for organisational context.

Science.gov (United States)

French, Beverley; Thomas, Lois H; Baker, Paula; Burton, Christopher R; Pennington, Lindsay; Roddam, Hazel

2009-05-19

Given the current emphasis on networks as vehicles for innovation and change in health service delivery, the ability to conceptualize and measure organisational enablers for the social construction of knowledge merits attention. This study aimed to develop a composite tool to measure the organisational context for evidence-based practice (EBP) in healthcare. A structured search of the major healthcare and management databases for measurement tools from four domains: research utilisation (RU), research activity (RA), knowledge management (KM), and organisational learning (OL). Included studies were reports of the development or use of measurement tools that included organisational factors. Tools were appraised for face and content validity, plus development and testing methods. Measurement tool items were extracted, merged across the four domains, and categorised within a constructed framework describing the absorptive and receptive capacities of organisations. Thirty measurement tools were identified and appraised. Eighteen tools from the four domains were selected for item extraction and analysis. The constructed framework consists of seven categories relating to three core organisational attributes of vision, leadership, and a learning culture, and four stages of knowledge need, acquisition of new knowledge, knowledge sharing, and knowledge use. Measurement tools from RA or RU domains had more items relating to the categories of leadership, and acquisition of new knowledge; while tools from KM or learning organisation domains had more items relating to vision, learning culture, knowledge need, and knowledge sharing. There was equal emphasis on knowledge use in the different domains. If the translation of evidence into knowledge is viewed as socially mediated, tools to measure the organisational context of EBP in healthcare could be enhanced by consideration of related concepts from the organisational and management sciences. Comparison of measurement tools across

Electricity distribution. Price control, reliability and customer services: response to OFFER

International Nuclear Information System (INIS)

1994-02-01

This document presents the views of the National Consumer Council to a recent consultation paper from OFFER, the body responsible for regulation of the United Kingdom electric power industry. The financial performance of the Regional Electricity Companies (RECs) is reviewed by examining how it relates to the prices paid by domestic consumers. A critical analysis is presented of OFFER's notion of the revision of the existing price control mechanism for the distribution businesses within the RECs. Standards of performance, debt and consumer disconnection are also examined. (UK)

Multidisciplinary Modelling Tools for Power Electronic Circuits

DEFF Research Database (Denmark)

Bahman, Amir Sajjad

in reliability assessment of power modules, a three-dimensional lumped thermal network is proposed to be used for fast, accurate and detailed temperature estimation of power module in dynamic operation and different boundary conditions. Since an important issue in the reliability of power electronics...... environment to be used for optimization of cooling system layout with respect to thermal resistance and pressure drop reductions. Finally extraction of electrical parasitics in the multi-chip power modules will be investigated. As the switching frequency of power devices increases, the size of passive...... components are reduced considerably that leads to increase of power density and cost reduction. However, electrical parasitics become more challenging with increasing the switching frequency and paralleled chips in the integrated and denser packages. Therefore, electrical parasitic models are analyzed based...

Innovative gas offers

International Nuclear Information System (INIS)

Sala, O.; Mela, P.; Chatelain, F.

2007-01-01

New energy offers are progressively made available as the opening of gas market to competition becomes broader. How are organized the combined offers: gas, electricity, renewable energies and energy services? What are the marketing strategies implemented? Three participants at this round table present their offer and answer these questions. (J.S.)

Offer

CERN Multimedia

Staff Association

2016-01-01

CERN was selected and participated in the ranking "Best Employers" organized by the magazine Bilan. To thank CERN for its collaboration, the magazine offers a reduction to the subscription fee for all employed members of personnel. 25% off the annual subscription: CHF 149.25 instead of CHF 199 .— The subscription includes the magazine delivered to your home for a year, every other Wednesday, as well as special editions and access to the e-paper. To benefit from this offer, simply fill out the form provided for this purpose. To get the form, please contact the secretariat of the Staff Association (Staff.Association@cern.ch).

Water Power Research | Water Power | NREL

Science.gov (United States)

Water Power Research Water Power Research NREL conducts water power research; develops design tools ; and evaluates, validates, and supports the demonstration of innovative water power technologies. Photo of a buoy designed around the oscillating water column principle wherein the turbine captures the

Power Watch: Increasing Transparency and Accessibility of Data in the Global Power Sector to Accelerate the Transition to a Lower Carbon Economy

Science.gov (United States)

Hennig, R. J.; Friedrich, J.; Malaguzzi Valeri, L.; McCormick, C.; Lebling, K.; Kressig, A.

2016-12-01

The Power Watch project will offer open data on the global electricity sector starting with power plants and their impacts on climate and water systems; it will also offer visualizations and decision making tools. Power Watch will create the first comprehensive, open database of power plants globally by compiling data from national governments, public and private utilities, transmission grid operators, and other data providers to create a core dataset that has information on over 80% of global installed capacity for electrical generation. Power plant data will at a minimum include latitude and longitude, capacity, fuel type, emissions, water usage, ownership, and annual generation. By providing data that is both comprehensive, as well as making it publically available, this project will support decision making and analysis by actors across the economy and in the research community. The Power Watch research effort focuses on creating a global standard for power plant information, gathering and standardizing data from multiple sources, matching information from multiple sources on a plant level, testing cross-validation approaches (regional statistics, crowdsourcing, satellite data, and others) and developing estimation methodologies for generation, emissions, and water usage. When not available from official reports, emissions, annual generation, and water usage will be estimated. Water use estimates of power plants will be based on capacity, fuel type and satellite imagery to identify cooling types. This analysis is being piloted in several states in India and will then be scaled up to a global level. Other planned applications of of the Power Watch data include improving understanding of energy access, air pollution, emissions estimation, stranded asset analysis, life cycle analysis, tracking of proposed plants and curtailment analysis.

What can management theories offer evidence-based practice? A comparative analysis of measurement tools for organisational context

Directory of Open Access Journals (Sweden)

Pennington Lindsay

2009-05-01

Full Text Available Abstract Background Given the current emphasis on networks as vehicles for innovation and change in health service delivery, the ability to conceptualise and measure organisational enablers for the social construction of knowledge merits attention. This study aimed to develop a composite tool to measure the organisational context for evidence-based practice (EBP in healthcare. Methods A structured search of the major healthcare and management databases for measurement tools from four domains: research utilisation (RU, research activity (RA, knowledge management (KM, and organisational learning (OL. Included studies were reports of the development or use of measurement tools that included organisational factors. Tools were appraised for face and content validity, plus development and testing methods. Measurement tool items were extracted, merged across the four domains, and categorised within a constructed framework describing the absorptive and receptive capacities of organisations. Results Thirty measurement tools were identified and appraised. Eighteen tools from the four domains were selected for item extraction and analysis. The constructed framework consists of seven categories relating to three core organisational attributes of vision, leadership, and a learning culture, and four stages of knowledge need, acquisition of new knowledge, knowledge sharing, and knowledge use. Measurement tools from RA or RU domains had more items relating to the categories of leadership, and acquisition of new knowledge; while tools from KM or learning organisation domains had more items relating to vision, learning culture, knowledge need, and knowledge sharing. There was equal emphasis on knowledge use in the different domains. Conclusion If the translation of evidence into knowledge is viewed as socially mediated, tools to measure the organisational context of EBP in healthcare could be enhanced by consideration of related concepts from the organisational

What can management theories offer evidence-based practice? A comparative analysis of measurement tools for organisational context

Science.gov (United States)

French, Beverley; Thomas, Lois H; Baker, Paula; Burton, Christopher R; Pennington, Lindsay; Roddam, Hazel

2009-01-01

Background Given the current emphasis on networks as vehicles for innovation and change in health service delivery, the ability to conceptualise and measure organisational enablers for the social construction of knowledge merits attention. This study aimed to develop a composite tool to measure the organisational context for evidence-based practice (EBP) in healthcare. Methods A structured search of the major healthcare and management databases for measurement tools from four domains: research utilisation (RU), research activity (RA), knowledge management (KM), and organisational learning (OL). Included studies were reports of the development or use of measurement tools that included organisational factors. Tools were appraised for face and content validity, plus development and testing methods. Measurement tool items were extracted, merged across the four domains, and categorised within a constructed framework describing the absorptive and receptive capacities of organisations. Results Thirty measurement tools were identified and appraised. Eighteen tools from the four domains were selected for item extraction and analysis. The constructed framework consists of seven categories relating to three core organisational attributes of vision, leadership, and a learning culture, and four stages of knowledge need, acquisition of new knowledge, knowledge sharing, and knowledge use. Measurement tools from RA or RU domains had more items relating to the categories of leadership, and acquisition of new knowledge; while tools from KM or learning organisation domains had more items relating to vision, learning culture, knowledge need, and knowledge sharing. There was equal emphasis on knowledge use in the different domains. Conclusion If the translation of evidence into knowledge is viewed as socially mediated, tools to measure the organisational context of EBP in healthcare could be enhanced by consideration of related concepts from the organisational and management sciences

Sensitivity analysis of hybrid power systems using Power Pinch Analysis considering Feed-in Tariff

International Nuclear Information System (INIS)

Mohammad Rozali, Nor Erniza; Wan Alwi, Sharifah Rafidah; Manan, Zainuddin Abdul; Klemeš, Jiří Jaromír

2016-01-01

Feed-in Tariff (FiT) has been one of the most effective policies in accelerating the development of renewable energy (RE) projects. The amount of RE electricity in the FiT purchase agreement is an important decision that has to be made by the RE project developers. They have to consider various crucial factors associated with RE system operation as well as its stochastic nature. The presented work aims to assess the sensitivity and profitability of a hybrid power system (HPS) in cases of RE system failure or shutdown. The amount of RE electricity for the FiT purchase agreement in various scenarios was determined using a novel tool called On-Grid Problem Table based on the Power Pinch Analysis (PoPA). A sensitivity table has also been introduced to assist planners to evaluate the effects of the RE system's failure on the profitability of the HPS. This table offers insights on the variance of the RE electricity. The sensitivity analysis of various possible scenarios shows that the RE projects can still provide financial benefits via the FiT, despite the losses incurred from the penalty levied. - Highlights: • A Power Pinch Analysis (PoPA) tool to assess the economics of an HPS with FiT. • The new On-Grid Problem Table for targeting the available RE electricity for FiT sale. • A sensitivity table showing the effect of RE electricity changes on the HPS profitability.

Recent activities at the zero-power teaching reactor CROCUS

International Nuclear Information System (INIS)

Girardin, G.; Chawla, R.

2011-01-01

CROCUS is a zero-power critical facility used mainly for educational purposes at the Swiss Federal Institute of Technology (EPFL) in Lausanne, Switzerland. It is a low-enriched-uranium fuelled, light-water moderated reactor, with the fission power limited to 100 W. The presentation will discuss the crucial role of CROCUS in teaching -- both as framework for reactor practicals offered to physics students at EPFL and as key educational tool in the recently established Swiss Master of Science in Nuclear Engineering. Regular development work is needed for the various instruments and components associated with the facility. As illustration, the recently completed refurbishment of the control rod system and the related calibration experiments will also be discussed.

Synchrotron radiation imaging is a powerful tool to image brain microvasculature

International Nuclear Information System (INIS)

Zhang, Mengqi; Sun, Danni; Xie, Yuanyuan; Xia, Jian; Long, Hongyu; Hu, Kai; Xiao, Bo; Peng, Guanyun

2014-01-01

Synchrotron radiation (SR) imaging is a powerful experimental tool for micrometer-scale imaging of microcirculation in vivo. This review discusses recent methodological advances and findings from morphological investigations of cerebral vascular networks during several neurovascular pathologies. In particular, it describes recent developments in SR microangiography for real-time assessment of the brain microvasculature under various pathological conditions in small animal models. It also covers studies that employed SR-based phase-contrast imaging to acquire 3D brain images and provide detailed maps of brain vasculature. In addition, a brief introduction of SR technology and current limitations of SR sources are described in this review. In the near future, SR imaging could transform into a common and informative imaging modality to resolve subtle details of cerebrovascular function

Synchrotron radiation imaging is a powerful tool to image brain microvasculature

Energy Technology Data Exchange (ETDEWEB)

Zhang, Mengqi; Sun, Danni; Xie, Yuanyuan; Xia, Jian; Long, Hongyu; Hu, Kai; Xiao, Bo, E-mail: csuxiaobo123456@163.com [Department of Neurology, Xiangya Hospital, Central South University, Changsha, Hunan 410008 (China); Peng, Guanyun [Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai 201800 (China)

2014-03-15

Synchrotron radiation (SR) imaging is a powerful experimental tool for micrometer-scale imaging of microcirculation in vivo. This review discusses recent methodological advances and findings from morphological investigations of cerebral vascular networks during several neurovascular pathologies. In particular, it describes recent developments in SR microangiography for real-time assessment of the brain microvasculature under various pathological conditions in small animal models. It also covers studies that employed SR-based phase-contrast imaging to acquire 3D brain images and provide detailed maps of brain vasculature. In addition, a brief introduction of SR technology and current limitations of SR sources are described in this review. In the near future, SR imaging could transform into a common and informative imaging modality to resolve subtle details of cerebrovascular function.

Special Offers

CERN Multimedia

Association du personnel

2011-01-01

Are you a member of the Staff Association? Did you know that as a member you can benefit from the following special offers: BCGE (Banque Cantonale de Genève): personalized banking solutions with preferential conditions.     TPG: reduced rates on annual transport passes for active and retired staff.     Aquaparc: reduced ticket prices for children and adults at this Swiss waterpark in Le Bouveret.     Walibi: reduced prices for children and adults at this French attraction park in Les Avenières.       FNAC: 5% reduction on FNAC vouchers.       For more information about all these offers, please consult our web site: http://association.web.cern.ch/association/en/OtherActivities/Offers.html

Special Offers

CERN Multimedia

Staff Association

2011-01-01

Are you a member of the Staff Association? Did you know that as a member you can benefit from the following special offers: BCGE (Banque Cantonale de Genève): personalized banking solutions with preferential conditions.     TPG: reduced rates on annual transport passes for all active and retired staff.     Aquaparc: reduced ticket prices for children and adults at this Swiss waterpark in Le Bouveret.     Walibi: reduced prices for children and adults at this French attraction park in Les Avenières.       FNAC: 5% reduction on FNAC vouchers.       For more information about all these offers, please consult our web site: http://association.web.cern.ch/association/en/OtherActivities/Offers.html

Power-Production Diagnostic Tools for Low-Density Wind Farms with Applications to Wake Steering

Science.gov (United States)

Takle, E. S.; Herzmann, D.; Rajewski, D. A.; Lundquist, J. K.; Rhodes, M. E.

2016-12-01

Hansen (2011) provided guidelines for wind farm wake analysis with applications to "high density" wind farms (where average distance between turbines is less than ten times rotor diameter). For "low-density" (average distance greater than fifteen times rotor diameter) wind farms, or sections of wind farms we demonstrate simpler sorting and visualization tools that reveal wake interactions and opportunities for wind farm power prediction and wake steering. SCADA data from a segment of a large mid-continent wind farm, together with surface flux measurements and lidar data are subjected to analysis and visualization of wake interactions. A time-history animated visualization of a plan view of power level of individual turbines provides a quick analysis of wake interaction dynamics. Yaw-based sectoral histograms of enhancement/decline of wind speed and power from wind farm reference levels reveals angular width of wake interactions and identifies the turbine(s) responsible for the power reduction. Concurrent surface flux measurements within the wind farm allowed us to evaluate stability influence on wake loss. A one-season climatology is used to identify high-priority candidates for wake steering based on estimated power recovery. Typical clearing prices on the day-ahead market are used to estimate the added value of wake steering. Current research is exploring options for identifying candidate locations for wind farm "build-in" in existing low-density wind farms.

Intelligent engineering and technology for nuclear power plant operation

International Nuclear Information System (INIS)

Wang, P.P.; Gu, X.

1996-01-01

The Three-Mile-Island accident has drawn considerable attention by the engineering, scientific, management, financial, and political communities as well as society at large. This paper surveys possible causes of the accident studied by various groups. Research continues in this area with many projects aimed at specifically improving the performance and operation of a nuclear power plant using the contemporary technologies available. In addition to the known cause of the accident and suggest a strategy for coping with these problems in the future. With the increased use of intelligent methodologies called computational intelligence or soft-computing, a substantially larger collection of powerful tools are now available for our designers to use in order to tackle these sensitive and difficult issues. These intelligent methodologies consists of fuzzy logic, genetic algorithms, neural networks, artificial intelligence and expert systems, pattern recognition, machine intelligence, and fuzzy constraint networks. Using the Three-Mile-Island experience, this paper offers a set of specific recommendations for future designers to take advantage of the powerful tools of intelligent technologies that we are now able to master and encourages the adoption of a novel methodology called fuzzy constraint network

Import/export policy as a tool of optimal utilization of power produced by renewable energy sources

International Nuclear Information System (INIS)

Meibom, P.; Svendsen, T.; Soerensen, B.

1997-10-01

The official Danish energy plan ENERGY 21 calls for a very high penetration of wind energy in the electricity sector. This will put issues of fitting a variable energy source into a stable supply system in focus. The present study investigates the role that collaboration with the hydro based Scandinavian countries can offer, and particularly looks at the conditions of the Nordic power pool, asking whether it will be possible profitably to trade wind power in such a pool system. Based upon hourly simulation of the Scandinavian electricity system, with connections to the European continent, we track the fate of wind power in satisfying Danish demand, selling surpluses to and buying deficits from the pool, assuming international transmission lines of the capacity existing today or larger, and repeating the simulation for combinations of good and bad wind and hydro years, as defined by historical sets of wind speeds and hydro resources depending on precipitation and ice melting. Decisions concerning pool bidding and regulation of the remaining power system (mainly gas-fired combined heat and power plants) are made on the basis of the calculated predictions based on the historical data sequences up to the time of decision, and then confronted with the subsequent data values in the set. (EG)

Rapid Tooling via Stereolithography

OpenAIRE

Montgomery, Eva

2006-01-01

Approximately three years ago, composite stereolithography (SL) resins were introduced to the marketplace, offering performance features beyond what traditional SL resins could offer. In particular, the high heat deflection temperatures and high stiffness of these highly filled resins have opened the door to several new rapid prototyping (RP) applications, including wind tunnel test modelling and, more recently, rapid tooling.

PRA: a powerful engineering decision tool

International Nuclear Information System (INIS)

Carvalho, H.G. de.

1988-03-01

The probabilistic risk analysis (PRA) is studied and its historical development is briefly presented. Human factors, sofware and guides, improvement of utility management of nuclear power operations are discussed. The development of a standardized LWR design, optimized for safety, reliability and economy is studied. The impact of risk assessments in public acceptance of nuclear power is discussed. (M.A.C.) [pt

Use of digital photography for power plant retrofits

International Nuclear Information System (INIS)

Kamba, J.J.

1995-01-01

One of the latest advancements in electronic tools for reducing engineering and drafting effort is the use of digital photography (DP) for retrofit and betterment projects at fossil and nuclear power plants. Sargent and Lundy (S and L) has effectively used digital photography for condition assessments, minor backfit repairs, thermo-lag fire wrap assessments and repairs, and other applications. Digital photography offers several benefits on these types of projects including eliminating the need for official repair drawings and providing station maintenance with a true 3-D visualization of the repair

Power reactor noise

International Nuclear Information System (INIS)

Thie, J.A.

1981-01-01

This book concentrates on the different types of noise present in power reactors and how the analysis of this noise can be used as a tool for reactor monitoring and diagnostics. Noise analysis is a growing field that offers advantages such as simplicity, low cost, and natural multivariable interactions. A major advantage, continuous and undisturbed monitoring, supplies a means of obtaining early warnings of possible reactor malfunctions thus preventing further complications by alerting operators to a problem - and aiding in the diagnosis of that problem - before it demands major repairs. Following an introductory chapter, the theoretical basis for the various methods of noise analysis is explained, and full chapters are devoted to the fundamentals of statistics for time-domain analysis and Fourier series and related topics for frequency-domain analysis. General experimental techniques and associated theoretical considerations are reviewed, leading to discussion of practical applications in the latter half of the book. Besides chapters giving examples of neutron noise and acoustical noise, chapters are also devoted to extensive examples from pressurized water reactor and boiling water reactor power plants

Expert system applications to nuclear power for enhancement of productivity and performance

International Nuclear Information System (INIS)

Naser, J.A.; Cain, D.G.; Sun, B.K.H.; Colley, R.W.; Hirota, N.S.; Gelhaus, F.E.

1989-01-01

Expert system technology has matured enough to offer a great deal of promise for a number of application areas in the electric utility industry. These applications can enhance productivity and aid in decision-making. Two parallel efforts are being performed at the Electric Power Research Institute (EPRI) to help the electric utility industry take advantage of expert system technology. The first effort is the development of expert system building tools which are tailored to electric utility industry applications. The second effort is the development of expert system applications. These two efforts complement each other. The application development tests the tools and identifies additional tool capabilities which are required. The tool development helps define the applications which can be successfully developed. The purpose of this paper is to describe some of the tool and application development work which is being performed at EPRI for the electric utility industry. (orig.)

Software-as-a-Service Offer Differentiation by Business Unit

Directory of Open Access Journals (Sweden)

Islam Balbaa

2011-01-01

Full Text Available This article summarizes the author's recent research into the fit between software-as-a-service (SaaS tools and the requirements of particular business units. First, an overview of SaaS is provided, including a summary of its benefits to users and software vendors. Next, the approach used to gather and analyze data about the SaaS solutions offered on the Force.com AppExchange is outlined. Finally, the article describes the managerial implications of this research.

Green Power Partner Resources

Science.gov (United States)

EPA Green Power Partners can access tools and resources to help promote their green power commitments. Partners use these tools to communicate the benefits of their green power use to their customers, stakeholders, and the general public.

Dynamic wind turbine models in power system simulation tool DIgSILENT

Energy Technology Data Exchange (ETDEWEB)

Hansen, A.D.; Iov, F.; Soerensen, Poul.; Cutululis, N.; Jauch, C.; Blaabjerg, F.

2007-08-15

This report presents a collection of models and control strategies developed and implemented in the power system simulation tool PowerFactory DIgSILENT for different wind turbine concepts. It is the second edition of Risoe-R-1400(EN) and it gathers and describes a whole wind turbine model database built-op and developed during several national research projects, carried out at Risoe DTU National Laboratory for Sustainable Energy and Aalborg University, in the period 2001-2007. The overall objective of these projects was to create a wind turbine model database able to support the analysis of the interaction between the mechanical structure of the wind turbine and the electrical grid during different operational modes. The report provides thus a description of the wind turbines modelling, both at a component level and at a system level. The report contains both the description of DIgSILENT built-in models for the electrical components of a grid connected wind turbine (e.g. induction generators, power converters, transformers) and the models developed by the user, in the dynamic simulation language DSL of DIgSILENT, for the non-electrical components of the wind turbine (wind model, aerodynamic model, mechanical model). The initialisation issues on the wind turbine models into the power system simulation are also presented. The main attention in the report is drawn to the modelling at the system level of the following wind turbine concepts: (1) Fixed speed active stall wind turbine concept (2) Variable speed doubly-fed induction generator wind turbine concept (3) Variable speed multi-pole permanent magnet synchronous generator wind turbine concept These wind turbine concept models can be used and even extended for the study of different aspects, e.g. the assessment of power quality, control strategies, connection of the wind turbine at different types of grid and storage systems. Different control strategies have been developed and implemented for these wind turbine

Advantages of using 3D design tools in the nuclear power plants projects; Ventajas del uso de herramientas de diseno 3D en los proyectos de centrales nucleares

Energy Technology Data Exchange (ETDEWEB)

Roldan, P.; Melendro, J.; Gomez, A.; Hermana, I.

2011-07-01

It there is anything that distinguished Iberdrola Ingeneria y Construccion, as part of the Iberdrola Group, it is its firm commitment to innovation and continuous improvement. This is the philosophy that led the company to its interest in three-dimensional design tools back when they were in an early stage of development : very little international implementation, lack of integration with other applications, absence of previous experiences to understand the best possible configuration for each case, etc. Nevertheless, the company was able to see the tremendous advantage of having a construction program in the early months of a project- a detailed program that could predict, and therefore avoid, the problems that, if not anticipated, would arise in the construction phase when they result in higher costs, longer time frames and a multitude of complications. This is precisely what 3D design tools offer prediction and this has been proven in the latest combined cycle projects executed with these tools. A project executed without errors not only decreases cost and time overruns, but also necessarily increases the quality of the end result. Efficiency and quality: these are both basic goals of Iberdrola Ingenieria y Construccion. The knowledge of and skill in the use of these tools have grown at the same time that their development has reached increasingly higher levels. As a result, Iberdrola Ingenieria y Conctruccion now has intensive experience in the use of 3D design tools and is preprared for the future challenges posed by these tools, the capabilities of which have attained such heights that it is possible to take on one of the most technically challenging projects that exists a nuclear power plant. And we are ready. (Author)

Reliability centered maintenance as an optimization tool for electrical power plants

International Nuclear Information System (INIS)

Jacquot, J.P.; Bryla, P.; Martin-Mattei, C.; Meuwisse, C.

1997-08-01

Seven years ago, Electricite de France launched a Reliability Centered Maintenance (RCM) pilot project to optimize preventive maintenance for its nuclear power plants. After a feasibility study, a RCM method was standardized. It is now applied on a large scale to the 50 EDF nuclear units. A RCM workstation based on this standardized method has been developed and is now used in each plant. In the next step, it is considered whether a Risk based Approach can be included in this RCM process in order to analyze critical passive components such as pipes and supports. Considering the potential advantages of these optimization techniques, a dedicated process has been also developed for maintenance of future plants, gas turbines, or nuclear units. A survey of these different developments of methods and tools is presented. (author)

Effects of Power Tracking Algorithms on Lifetime of Power Electronic Devices Used in Solar Systems

Directory of Open Access Journals (Sweden)

Canras Batunlu

2016-10-01

Full Text Available In photovoltaic solar energy systems, power management algorithms (PMAs, usually called maximum power point tracking (MPPT algorithms, are widely used for extracting maximum available power at every point in time. However, tracking the maximum power has negative effects on the availability of solar energy systems. This is due, mainly, to the created disturbances and thermal stresses on the associated power electronic converters (PECs. This work investigates the effects of PMA on the lifetime consumption, thermal stresses and failures on DC-DC converters used in solar systems. Firstly theoretical analysis and modelling of photovoltaic solar systems including converter’s electro thermal characteristics were developed. Subsequently, experiments on photovoltaic solar systems were carried out using two different PMAs, namely, perturb and observe (P&O and incremental conductance (IC. Real-time data was collected, under different operating conditions, including thermal behavior using thermal imaging camera and dSPACE. Converters’ thermal cycling was found to be approximately 3 °C higher with the IC algorithm. The steady state temperature was 52.7 °C, for the IC while it was 42.6 °C for P&O. Although IC algorithm offers more accurate power management tool, it causes more severe thermal stresses which, in this study, has led to approximately 1.4 times greater life consumption compared to P&O.

Wireless power pad with local power activation for portable devices

NARCIS (Netherlands)

Waffenschmidt, E.; Zheglov, V.

2007-01-01

Wireless power transfer by magnetic induction offers a simple to use way to recharge mobile devices like e.g. mobile phone, music players or medical sensors. As shown by a previous report and an existing Power Pad demonstrator, wireless inductive power transfer is possible with a good power

Tools, courses, and learning pathways offered by the National Interagency Fuels, Fire, and Vegetation Technology Transfer

Science.gov (United States)

Eva K. Strand; Kathy H. Schon; Jeff Jones

2010-01-01

Technological advances in the area of fuel and wildland fire management have created a need for effective decision support tools and technology training. The National Interagency Fuels Committee and LANDFIRE have chartered a team to develop science-based learning tools for assessment of fire and fuels and to provide online training and technology transfer to help...

Establishing a community-wide DNA barcode library as a new tool for arctic research

DEFF Research Database (Denmark)

Wirta, H.; Várkonyi, G.; Rasmussen, C.

2016-01-01

DNA sequences offer powerful tools for describing the members and interactions of natural communities. In this study, we establish the to-date most comprehensive library of DNA barcodes for a terrestrial site, including all known macroscopic animals and vascular plants of an intensively studied...... area of the High Arctic, the Zackenberg Valley in Northeast Greenland. To demonstrate its utility, we apply the library to identify nearly 20 000 arthropod individuals from two Malaise traps, each operated for two summers. Drawing on this material, we estimate the coverage of previous morphology...... ongoing shifts in arctic communities and ecosystems. The DNA barcode library now established for Zackenberg offers new scope for such explorations, and for the detailed dissection of interspecific interactions throughout the community....

Maintenance Tools applied to Electric Generators to Improve Energy Efficiency and Power Quality of Thermoelectric Power Plants

Directory of Open Access Journals (Sweden)

Milton Fonseca Junior

2017-07-01

Full Text Available This paper presents a specific method to improve the reliability of the equipment and the quality of power supplied to the electrical systems with the frequency and voltage control of a thermoelectric plant, to guarantee a more stable system. The method has the novelty of combining Total Productive Maintenance (TPM using only four pillars, with Electrical Predictive Maintenance based in failure analysis and diagnostic. It prevents voltage drops caused by excessive reactive consumption, thus guaranteeing the company a perfect functioning of its equipment and providing a longer life of them. The Maintenance Management Program (MMP seeks to prevent failures from causing the equipment to be shut down from the electrical system, which means large financial losses, either by reducing billing or by paying fines to the regulatory agency, in addition to prejudice the reliability of the system. Using management tools, but applying only four TPM pillars, it was possible to achieve innovation in power plants with internal combustion engines. This study aims to provide maintenance with a more reliable process, through the implantation of measurement, control and diagnostic devices, thus allowing the management to reduce breakdown of plant equipment. Some results have been achieved after the implementation, such as reduction of annual maintenance cost, reduction of corrective maintenance, increase of MTBF (Mean Time between Failures and reduction of MTTR (Mean Time to Repair in all areas. Probabilistic models able to describe real processes in a more realistic way, and facilitate the optimization at maximum reliability or minimum costs are presented. Such results are reflected in more reliable and continual power generation.

Optimal hydro scheduling and offering strategies considering price uncertainty and risk management

International Nuclear Information System (INIS)

Catalão, J.P.S.; Pousinho, H.M.I.; Contreras, J.

2012-01-01

Hydro energy represents a priority in the energy policy of Portugal, with the aim of decreasing the dependence on fossil fuels. In this context, optimal hydro scheduling acquires added significance in moving towards a sustainable environment. A mixed-integer nonlinear programming approach is considered to enable optimal hydro scheduling for the short-term time horizon, including the effect of head on power production, start-up costs related to the units, multiple regions of operation, and constraints on discharge variation. As new contributions to the field, market uncertainty is introduced in the model via price scenarios and risk management is included using Conditional Value-at-Risk to limit profit volatility. Moreover, plant scheduling and pool offering by the hydro power producer are simultaneously considered to solve a realistic cascaded hydro system. -- Highlights: ► A mixed-integer nonlinear programming approach is considered for optimal hydro scheduling. ► Market uncertainty is introduced in the model via price scenarios. ► Risk management is included using conditional value-at-risk. ► Plant scheduling and pool offering by the hydro power producer are simultaneously considered. ► A realistic cascaded hydro system is solved.

Power system dynamics and control

CERN Document Server

Kwatny, Harry G

2016-01-01

This monograph explores a consistent modeling and analytic framework that provides the tools for an improved understanding of the behavior and the building of efficient models of power systems. It covers the essential concepts for the study of static and dynamic network stability, reviews the structure and design of basic voltage and load-frequency regulators, and offers an introduction to power system optimal control with reliability constraints. A set of Mathematica tutorial notebooks providing detailed solutions of the examples worked-out in the text, as well as a package that will enable readers to work out their own examples and problems, supplements the text. A key premise of the book is that the design of successful control systems requires a deep understanding of the processes to be controlled; as such, the technical discussion begins with a concise review of the physical foundations of electricity and magnetism. This is followed by an overview of nonlinear circuits that include resistors, inductors, ...

Tools and setups for experiments with AC and rotating magnetic fields

International Nuclear Information System (INIS)

Ponikvar, D

2010-01-01

A rotating magnetic field is the basis for the transformation of electrical energy to mechanical energy. School experiments on the rotating magnetic field are rare since they require the use of specially prepared mechanical setups and/or relatively large, three-phase power supplies to achieve strong magnetic fields. This paper proposes several experiments and describes setups and tools which are easy to obtain and work with. Free software is offered to generate the required signals by a personal computer. The experiments can be implemented in introductory physics courses on electromagnetism for undergraduates or specialized courses at high schools.

Market aspects of smart power grids development

Directory of Open Access Journals (Sweden)

Maciej Makowski

2012-03-01

Full Text Available Smart Grids herald a revolution in the power sector. The centralized and passive power grid model known for over a century is before our very eyes assuming a completely brand new shape: of an active and dynamic network with an increasingly relevant role of consumers – prosumers, who are offered brand new products and services. Such an active development is possible due to a number of factors, such as: 1. Synergy of ICT with power engineering – these disciplines are becoming an indispensable element of the modern power grid’s operation, 2. The European Union’s regulations in the area of reduction of CO2 emission and improved energy efficiency, as well as identification of Smart Grids as one of the optimum tools, 3. Growth, thanks to continuously increasing expenditures, public awareness of the purchase and rational use of energy. However, the Smart Grid development and ICT implementation in the power sector also carry a risk in the matter of setting up system and process links between the systems of concerned energy market players, which should be mitigated by development of technical standards, methods and principles of good cooperation between the concerned parties. Mitigation of the risk, and as a consequence, effective Smart Grids development will provide conditions for dynamic development of new roles and mechanisms on the energy market. Offering modern products and services to consumers and prosumers, and effective implementation on a national scale of demand management mechanisms will be a source of multidimensional benefits of a functional and financial nature, and will also have a positive impact on the National Lower Grid’s security.

The research and development of module 3D designing system for nuclear power project based on the PDMS

International Nuclear Information System (INIS)

Lu Qinwu; Li Yi; Wu Xiangyong

2012-01-01

In order to meet the demand of implementing Modularization design in CPR1000 nuclear power projects, this study aims to develop, relying on CPR1000 nuclear power project, the self-reliant module 3D design system based on the PDMS. so as to offer a convenient and effective module 3D design tool for the designers. Satisfactory results have been achieved through the test and application of two design projects. The research and application have entered the domestic advanced level. (authors)

Public offering system of research and development ideas in JAPC

International Nuclear Information System (INIS)

Yamamoto, Kazuhiko; Enami, Hisashi; Sakaiwaki, Yuuji; Nakayama, Yoshiyuki

2011-01-01

Public offering system of research and development ideas in The Japan Atomic Power Company (JAPC) is introduced. This system is established in 1999 to solve various subjects existing in JAPC's nuclear power stations by using highly advanced technique possessed by the enterprises or the organizations limited in Fukui Prefecture, and also to contribute them to become more advanced in their skill of technology. We have improved this system to make the results more applicable. We think it is important to coexist with the local community for the company engaged in nuclear energy as to cooperate together for the improvement of the local society. (author)

Uranus: a rapid prototyping tool for FPGA embedded computer vision

Science.gov (United States)

Rosales-Hernández, Victor; Castillo-Jimenez, Liz; Viveros-Velez, Gilberto; Zuñiga-Grajeda, Virgilio; Treviño Torres, Abel; Arias-Estrada, M.

2007-01-01

The starting point for all successful system development is the simulation. Performing high level simulation of a system can help to identify, insolate and fix design problems. This work presents Uranus, a software tool for simulation and evaluation of image processing algorithms with support to migrate them to an FPGA environment for algorithm acceleration and embedded processes purposes. The tool includes an integrated library of previous coded operators in software and provides the necessary support to read and display image sequences as well as video files. The user can use the previous compiled soft-operators in a high level process chain, and code his own operators. Additional to the prototyping tool, Uranus offers FPGA-based hardware architecture with the same organization as the software prototyping part. The hardware architecture contains a library of FPGA IP cores for image processing that are connected with a PowerPC based system. The Uranus environment is intended for rapid prototyping of machine vision and the migration to FPGA accelerator platform, and it is distributed for academic purposes.

The fault tree as a tool in safety analysis in nuclear power plants

International Nuclear Information System (INIS)

Waddington, J.G.; Wild, A.

1981-01-01

Modern safety analysis must be able to identify realistic failure modes based on realistic operation and system malfunction, demonstrate rigorously that adequate independence exists between a malfunctioning system and those other systems required to mitigate the effects of the malfunction, design adequate reliability into systems important to plant safety and to demonstrate rigorously that the design reliability is met in operation, and identify the realistic actions expected of the operator. Fault trees, which have proved to be a powerful tool to achieve these objectives, are inevitably large and must be computerized. However, the computerized system must be simple, must allow merging of branches developed independently, must provide for easy modification and the processing must be economical and easily accessible. A new system for displaying, plotting and analysing fault trees has been developed and implemented on a small computer at AECB to demonstrate the viability of the approach to designers, and to provide a tool to assess licensee's submissions on failure modes of support systems such as electrical, service water and air, and to assess reliability predictions for special safety systems. (author)

Power and welfare

DEFF Research Database (Denmark)

Mik-Meyer, Nanna; Villadsen, Kasper

readily evident that power is at stake when institutions educate, counsel or ‘empower’ citizens. This book offers a framework for understanding and analyzing these complex and implicit forms of power at play in the encounters between citizens and welfare institutions. Taking as its starting point the idea......In the welfare provision of today, power takes both the shape of juridical sanctions and of attractive offers for self-development. When state institutions punish criminals, remove children at risk, or enforce sanctions upon welfare recipients the question of power is immediately urgent. It is less...... that power takes many different shapes, and that different approaches to power may be necessary in the diverse contexts where citizens encounter welfare professionals, the book demonstrates how significant social theorists, spanning from Goffman to Foucault, can be used for inquiries into these encounters...

Power and Welfare

DEFF Research Database (Denmark)

Mik-Meyer, Nanna; Villadsen, Kaspar

readily evident that power is at stake when institutions educate, counsel or 'empower' citizens. This book offers a framework for understanding and analyzing these complex and implicit forms of power at play in the encounters between citizens and welfare institutions. Taking as its starting point the idea......In the welfare provision of today, power takes both the shape of juridical sanctions and of attractive offers for self-development. When state institutions punish criminals, remove children at risk, or enforce sanctions upon welfare recipients the question of power is immediately urgent. It is less...... that power takes many different shapes, and that different approaches to power may be necessary in the diverse contexts where citizens encounter welfare professionals, the book demonstrates how significant social theorists, spanning from Goffman to Foucault, can be used for inquiries into these encounters...

A Model-Driven Approach for Hybrid Power Estimation in Embedded Systems Design

Directory of Open Access Journals (Sweden)

Ben Atitallah Rabie

2011-01-01

Full Text Available Abstract As technology scales for increased circuit density and performance, the management of power consumption in system-on-chip (SoC is becoming critical. Today, having the appropriate electronic system level (ESL tools for power estimation in the design flow is mandatory. The main challenge for the design of such dedicated tools is to achieve a better tradeoff between accuracy and speed. This paper presents a consumption estimation approach allowing taking the consumption criterion into account early in the design flow during the system cosimulation. The originality of this approach is that it allows the power estimation for both white-box intellectual properties (IPs using annotated power models and black-box IPs using standalone power estimators. In order to obtain accurate power estimates, our simulations were performed at the cycle-accurate bit-accurate (CABA level, using SystemC. To make our approach fast and not tedious for users, the simulated architectures, including standalone power estimators, were generated automatically using a model driven engineering (MDE approach. Both annotated power models and standalone power estimators can be used together to estimate the consumption of the same architecture, which makes them complementary. The simulation results showed that the power estimates given by both estimation techniques for a hardware component are very close, with a difference that does not exceed 0.3%. This proves that, even when the IP code is not accessible or not modifiable, our approach allows obtaining quite accurate power estimates that early in the design flow thanks to the automation offered by the MDE approach.

Data-Mining – A Valuable Managerial Tool for Improving Power Plants Efficiency

Directory of Open Access Journals (Sweden)

Danubianu Mirela

2014-05-01

Full Text Available Energy and environment are top priorities for the EU’s Europe 2020 Strategy. Both fields imply complex approaches and consistent investment. The paper presents an alternative to large investments to improve the efficiencies of existing (outdated power installations: namely the use of data-mining techniques for analysing existing operational data. Data-mining is based upon exhaustive analysis of operational records, inferring high-value information by simply processing records with advanced mathematical / statistical tools. Results can be: assessment of the consistency of measurements, identification of new hardware needed for improving the quality of data, deducing the most efficient level for operation (internal benchmarking, correlation of consumptions with power/ heat production, of technical parameters with environmental impact, scheduling the optimal maintenance time, fuel stock optimization, simulating scenarios for equipment operation, anticipating periods of maximal stress of equipment, identification of medium and long term trends, planning and decision support for new investment, etc. The paper presents a data mining process carried out at the TERMICA - Suceava power plant. The analysis calls for a multidisciplinary approach, a complex team (experts in power&heat production, mechanics, environmental protection, economists, and last but not least IT experts and can be carried out with lower expenses than an investment in new equipment. Involvement of top management of the company is essential, being the driving force and motivation source for the data-mining team. The approach presented is self learning as once established, the data-mining analytical, modelling and simulation procedures and associated parameter databases can adjust themselves by absorbing and processing new relevant information and can be used on a long term basis for monitoring the performance of the installation, certifying the soundness of managerial measures taken

Offers

CERN Document Server

Staff Association

2015-01-01

New offer for our members. The Staff Association CERN staff has recently concluded a framework agreement with AXA Insurance Ltd, General-Guisan-Strasse 40, 8401 Winterthur. This contract allows you to benefit from a preferential tariff and conditions for insurances: Motor vehicles for passenger cars and motorcycles of the product line STRADA: 10% discount Household insurance (personal liability and household contents) the product line BOX: 10% discount Travel insurance: 10% discount Buildings: 10% discount Legal protection: 10% discount AXA is number one on the Swiss insurance market. The product range encompasses all non-life insurance such as insurance of persons, property, civil liability, vehicles, credit and travel as well as innovative and comprehensive solutions in the field of occupational benefits insurance for individuals and businesses. Finally, the affiliate AXA-ARAG (legal expenses insurance) completes the offer. Armed with your staff association CERN card, you can always get the off...

Language Management Tools

DEFF Research Database (Denmark)

Sanden, Guro Refsum

This paper offers a review of existing literature on the topic of language management tools – the means by which language is managed – in multilingual organisations. By drawing on a combination of sociolinguistics and international business and management studies, a new taxonomy of language...... management tools is proposed, differentiating between three categories of tools. Firstly, corporate policies are the deliberate control of issues pertaining to language and communication developed at the managerial level of a firm. Secondly, corporate measures are the planned activities the firm’s leadership...... may deploy in order to address the language needs of the organisation. Finally, front-line practices refer to the use of informal, emergent language management tools available to staff members. The language management tools taxonomy provides a framework for operationalising the management of language...

Wage Offers and Full-Time and Part-Time Employment by British Women.

Science.gov (United States)

Ermisch, John F.; Wright, Robert E.

1993-01-01

Analysis of British married women's employment decisions indicates that differences in wage offers between full- and part-time employment are important determinants of working full-time. Women who work despite low earning power, husbands' high income, or discouraging family circumstances tend to work part-time. (SK)

Examination of issues related to the development and implementation of real-time operational safety monitoring tools in the nuclear power industry

International Nuclear Information System (INIS)

Puglia, William J.; Atefi, Bahman

1995-01-01

In recent years, risk and reliability techniques have been increasingly used to optimize deterministic requirements and to improve the operational safety of nuclear power stations. This paper discusses the historical development and current status of implementation of real-time operational safety monitoring tools in the nuclear power industry worldwide. A safety monitor is defined as a PC-based risk management tool, based on a plant specific PSA, which can be used to manage plant safety during the day-to-day operation of a nuclear power plant by planning maintenance activities and providing advisory information to plant operational staff in order to avoid high risk plant configurations. As this technique has only been applied in a few plants worldwide, the technology is still evolving and there are several technical and implementation-related issues which still need to be resolved. This paper attempts to summarize all such issues and describe how they have been addressed in several different applications of this technology around the world

Beginning Power BI with Excel 2013 self-service business intelligence using Power Pivot, Power View, Power Query, and Power Map

CERN Document Server

Clark, Dan

2014-01-01

Understanding your company's data has never been easier than with Microsoft's new Power BI package for Excel 2013. Consisting of four powerful tools-Power Pivot, Power View, Power Query and Power Maps-Power BI makes self-service business intelligence a reality for a wide range of users, bridging the traditional gap between Excel users, business analysts and IT experts and making it easier for everyone to work together to build the data models that can give you game-changing insights into your business. Beginning Power BI with Excel 2013 guides you step by step through the process of analyzin

Heuristic and probabilistic wind power availability estimation procedures: Improved tools for technology and site selection

Energy Technology Data Exchange (ETDEWEB)

Nigim, K.A. [University of Waterloo, Waterloo, Ont. (Canada). Department of Electrical and Computer Engineering; Parker, Paul [University of Waterloo, Waterloo, Ont. (Canada). Department of Geography, Environmental Studies

2007-04-15

The paper describes two investigative procedures to estimate wind power from measured wind velocities. Wind velocity data are manipulated to visualize the site potential by investigating the probable wind power availability and its capacity to meet a targeted demand. The first procedure is an availability procedure that looks at the wind characteristics and its probable energy capturing profile. This profile of wind enables the probable maximum operating wind velocity profile for a selected wind turbine design to be predicted. The structured procedures allow for a consequent adjustment, sorting and grouping of the measured wind velocity data taken at different time intervals and hub heights. The second procedure is the adequacy procedure that investigates the probable degree of availability and the application consequences. Both procedures are programmed using MathCAD symbolic mathematical software. The math tool is used to generate a visual interpolation of the data as well as numerical results from extensive data sets that exceed the capacity of conventional spreadsheet tools. Two sites located in Southern Ontario, Canada are investigated using the procedures. Successful implementation of the procedures supports informed decision making where a hill site is shown to have much higher wind potential than that measured at the local airport. The process is suitable for a wide spectrum of users who are considering the energy potential for either a grid-tied or off-grid wind energy system. (author)

Offers

CERN Multimedia

Staff Association

2012-01-01

proposes the following offer: 15% discount for the Staff Association members who enroll their children in summer FUTUREKIDS activities. Extracurricular Activities For Your Children The FUTUREKIDS Geneva Learning Center is open 6 days a week and offers a selection of after-school extracurricular activities for children and teenagers (ages 5 to 16). In addition to teaching in its Learning Centers, Futurekids collaborates with many private schools in Suisse Romande (Florimont, Moser, Champittet, Ecole Nouvelle, etc.) and with the Département de l'Instruction Publique (DIP) Genève. Courses and camps are usually in French but English groups can be set up on demand. FUTUREKIDS Computer Camps (during school holidays) FUTUREKIDS Computer Camps are a way of having a great time during vacations while learning something useful, possibly discovering a new hobby or even, why not, a future profession. Our computer camps are at the forefront of technology. Themes are diverse and suit all ...

Price-Taker Offering Strategy in Electricity Pay-as-Bid Markets

DEFF Research Database (Denmark)

Mazzi, Nicolò; Kazempour, Jalal; Pinson, Pierre

2017-01-01

The recent increase in the deployment of renewable energy sources may affect the offering strategy of conventional producers, mainly in the balancing market. The topics of optimal offering strategy and self-scheduling of thermal units have been extensively addressed in the literature. The feasible...... operating region of such units can be modeled using a mixed-integer linear programming approach, and the trading problem as a linear programming problem. However, the existing models mostly assume a uniform pricing scheme in all market stages, while several European balancing markets (e.g., in Germany...... and Italy) are settled under a pay-as-bid pricing scheme. The existing tools for solving the trading problem in pay-as-bid electricity markets rely on non-linear optimization models, which, combined with the unit commitment constraints, result in a mixed-integer non-linear programming problem. In contrast...

Offer of secondary reserve with a pool of electric vehicles on the German market

International Nuclear Information System (INIS)

Jargstorf, Johannes; Wickert, Manuel

2013-01-01

This paper analyzes the business case of offering secondary downward reserve for frequency control on the German market by a pool of electrical vehicles. Former benchmark studies promised high revenues especially for this case. The benefits could provide an incentive to customers to buy an electric vehicle. The business case is analyzed for the German market as a case study. Specific regulations for this market, real driving patterns and real market data are taken into account when calculating revenues. Secondary reserve is strictly regulated, requiring a very high level of availability. As a result, simulated revenues are lower than assumed. Simulation shows average revenues of less than 5€ per month and vehicle. As a major bottleneck for an offer of secondary reserve, fully charged batteries are identified. Additionally an issue is made of costs for communication and customer compensation. Based on the simulation results, it is argued that the market for secondary reserve should not be accessed with these small units. For electric vehicles, easier accessible markets with lower related costs should be considered instead. -- Highlights: •We analyze a business case of providing reserve power with electric vehicles. •We include legal regulations for providing reserve power in the calculation. •Reserve requirements lead to a significant drop in expected revenues. •Results show that vehicles are not suitable to offer reserve power

Optimal Offering and Operating Strategy for a Large Wind-Storage System as a Price Maker

DEFF Research Database (Denmark)

Ding, Huajie; Pinson, Pierre; Hu, Zechun

2017-01-01

Wind farms and energy storage systems are playing increasingly more important roles in power systems, which makes their offering non-negligible in some markets. From the perspective of wind farm-energy storage systems (WF-ESS), this paper proposes an integrated strategy of day-ahead offering...... and real-time operation policies to maximize their overall profit. As participants with large capacity in electricity markets can influence cleared prices by strategic offering, a large scaled WFESS is assumed to be a price maker in day-ahead markets. Correspondingly, the strategy considers influence...

The Power of Digital Storytelling as a Culturally Relevant Health Promotion Tool.

Science.gov (United States)

Briant, Katherine J; Halter, Amy; Marchello, Nathan; Escareño, Monica; Thompson, Beti

2016-11-01

Digital storytelling is an emergent method in health promotion. It addresses health inequities by combining technology with the voices of members of vulnerable, often underrepresented populations. The overall goal of this pilot project was to explore if digital storytelling could be a culturally relevant health promotion tool for Hispanics/Latinos to share their experiences with cancer, or other diseases. Promotores participated in a train-the-trainer workshop. Community members worked with trained promotores to create digital stories through community workshops. We conducted one-on-one interviews with digital story creators to elicit perspectives and assess their experience. One overarching theme among storytellers was the power of storytelling. Supporting subthemes that emerged in the interviews were (1) connection and communication, (2) lack of opportunities and barriers to telling stories, and (3) potential for disease prevention awareness and education. This study found digital storytelling to be culturally relevant for Hispanics/Latinos of Mexican origin. For these storytellers it was a uniquely valuable tool for sharing personal stories of overcoming or managing health issues. Participants found the digital story experience to be positive and beneficial. It provided a healing outlet to reflect on a difficult experience and find support within one's own community. © 2016 Society for Public Health Education.

Vacancy Duration, Wage Offers, and Job Requirements - Pre-Match Data Evidence

DEFF Research Database (Denmark)

Chen, Long Hwa; Eriksson, Tor Viking

Besides wage offers, credentials like education, work experience and skill requirements are key screening tools for firms in their recruitment of new employees. This paper contributes some new evidence to a relatively tiny literature on firms' recruitment behaviour. In particular, our analysis...... durations. The duration of vacancies due to regular turnover and changing business cycle condition are less affected by skill requirements than that of other vacant jobs....

Improvement of the severe accident practice tool

International Nuclear Information System (INIS)

Kawasaki, Ikuo; Takahashi, Shunsuke

2016-01-01

We developed the severe accident (SA) practice tool based on lessons learned in the accident at the Tokyo Electric Power Company Fukushima Daiichi Nuclear Power Station. We utilized the developed SA practice tool and carried out the SA training for some employees of Kansai Electric Power Co., Inc. Afterwards, we examined the opinions given by trainees attending the training lecture and improved the SA practice tool to achieve a better educational effect. The main changes we made were improvement of the practice scenario for EAL judgments and addition of functions to the practice tool such as the EAL explanation document indication. As a result of having carried out the SA education using this practice tool, we determined the tool users could make the right EAL judgment and report the communication vote. Finally, we confirmed that the knowledge necessary for SA correspondence could be given satisfactorily by this practice tool. (author)

Data in the Classroom: New Tools for Engaging Students with Data

Science.gov (United States)

Dean, A.; Pisut, D.

2017-12-01

The ability to understand and analyze data effectively can increase students ability to understand current and historical global change. Since 2009, NOAA Data in the Classroom Project has been offering formal education resources and tools aimed at helping teachers to build data and environmental literacy in their classrooms. Currently, NOAA is modernizing its Data in the Classroom resources using a web application within Esri's web-based GIS platform, Story Maps. Story Maps have been used for a wide variety of purposes, including teaching and instruction, for more than a decade. This technology can help to engage students in a story, like El Niño, while harnessing the power of data - using maps, data visualizations and data query tools. The aim is to create an effective education tool that allows students access to user-friendly, relevant data sets from NOAA, ultimately providing the opportunity to explore dynamic Earth processes and understand the impact of environmental events on a regional or global scale. This presentation will include demonstrations of the recently launched web-based curricular modules, highlighting the Esri web technology used to build and distribute each module and the interactive data tools that are unique to this project.

Tool Inventory and Replacement

Science.gov (United States)

Bear, W. Forrest

1976-01-01

Vocational agriculture teachers are encouraged to evaluate curriculum offerings, the new trends in business and industry, and develop a master tool purchase and replacement plan over a 3- to 5-year period. (HD)

Fractional power operation of tokamak reactors

International Nuclear Information System (INIS)

Mau, T.K.; Vold, E.L.; Conn, R.W.

1986-01-01

Methods to operate a tokamak fusion reactor at fractions of its rated power, identify the more effective control knobs and assess the impact of the requirements of fractional power operation on full power reactor design are explored. In particular, the role of burn control in maintaining the plasma at thermal equilibrium throughout these operations is studied. As a prerequisite to this task, the critical physics issues relevant to reactor performance predictions are examined and some insight into their impact on fractional power operation is offered. The basic tool of analysis consists of a zero-dimensional (0-D) time-dependent plasma power balance code which incorporates the most advanced data base and models in transport and burn plasma physics relevant to tokamaks. Because the plasma power balance is dominated by the transport loss and given the large uncertainty in the confinement model, the authors have studied the problem for a wide range of energy confinement scalings. The results of this analysis form the basis for studying the temporal behavior of the plasma under various thermal control mechanisms. Scenarios of thermally stable full and fractional power operations have been determined for a variety of transport models, with either passive or active feedback burn control. Important power control parameters, such as gas fueling rate, auxiliary power and other plasma quantities that affect transport losses, have also been identified. The results of these studies vary with the individual transport scaling used and, in particular, with respect to the effect of alpha heating power on confinement

Develop risk-based procurement management tools for SMEs

NARCIS (Netherlands)

Staal, Anne; Hagelaar, Geoffrey; Walhof, Gert; Holman, Richard

2016-01-01

This paper provides guidance for developing risk-based management tools to improve the procurement (purchasing) performance of SMEs. Extant academic literature only offers little support on developing such tools and does not consider the wide variety of SMEs. The paper defines a procurement tool for

The entropy concept. A powerful tool for multiphase flow analysis

International Nuclear Information System (INIS)

Kolev, Nikolay Ivanov

2007-01-01

This work summarizes the system of partial differential equations describing multiphase, multi-component flows in arbitrary geometry including porous structures with arbitrary thermal and mechanical interactions among the fields and between each field and the structure. Each of the fluids is designed as a universal mixture of miscible and immiscible component. The system contains the rigorously derived entropy equations which are used instead of the primitive form of the energy conservation. Based on well established mathematical theorems the equations are local volume and time averaged. The so called volume conservation equation allowing establishing close coupling between pressure and density changes of all of the participating velocity fields is presented. It replaces one of the mass conservation equations. The system is solved within the computer code system IVA together with large number of constitutive relationships for closing it in arbitrary geometry. The extensive validation on many hundreds of simple- and complex experiments, including the many industrial applications, demonstrates the versatility and the power of this analytical tool for designing complex processes in the industry and analyzing complex processes in the nature. (author)

Wireless power transfer for medical microsystems

CERN Document Server

Sun, Tianjia; Wang, Zhihua

2013-01-01

This book equips readers with tools for computer architecture of high performance, low power, and high reliability memory hierarchy in computer systems based on emerging memory technologies, such as STTRAM, PCM, FBDRAM, etc.  The techniques described offer advantages of high density, near-zero static power, and immunity to soft errors, which have the potential of overcoming the “memory wall.”  The authors discuss memory design from various perspectives: emerging memory technologies are employed in the memory hierarchy with novel architecture modification;  hybrid memory structure is introduced to leverage advantages from multiple memory technologies; an analytical model named “Moguls” is introduced to explore quantitatively the optimization design of a memory hierarchy; finally, the vulnerability of the CMPs to radiation-based soft errors is improved by replacing different levels of on-chip memory with STT-RAMs.  ·         Provides a holistic study of using emerging memory technologies in...

Testing tool for software concerning nuclear power plant safety

International Nuclear Information System (INIS)

Boulc'h, J.; Le Meur, M.; Collart, J.M.; Segalard, J.; Uberschlag, J.

1984-11-01

In the present case, softwares to be analyzed are all written in assembler language. This paper presents the study and the realization of a tool to analyze softwares which have an important role for nuclear reactor protection and sauvegarde: principles of the tool design, working principle, realization and evolution of dynamic analyze tool [fr

Development of effective tool for iterative design of human machine interfaces in nuclear power plant

International Nuclear Information System (INIS)

Nakagawa, Takashi; Matsuo, Satoko; Yoshikawa, Hidekazu; Wu, Wei; Kameda, Akiyuki; Fumizawa, Motoo

2000-01-01

The authors have developed SEAMAID, which is a Simulation-based Evaluation and Analysis support system for MAn-machine Interface Design (SEAMAID) in the domain of nuclear power plants. The SEAMAID simulated the interaction between an operator and human machine interfaces (HMI), and supports to evaluate the HMI by using the simulation results. In this paper, a case study of evaluation for conventional center control room design was conducted. The authors were confirmed that SEAMAID is a useful tool for improvements of HMI design (J.P.N.)

Modelling and Simulation of TCPAR for Power System Flow Studies

Directory of Open Access Journals (Sweden)

Narimen Lahaçani AOUZELLAG

2012-12-01

Full Text Available In this paper, the modelling of Thyristor Controlled Phase Angle Regulator ‘TCPAR’ for power flow studies and the role of that modelling in the study of Flexible Alternating Current Transmission Systems ‘FACTS’ for power flow control are discussed. In order to investigate the impact of TCPAR on power systems effectively, it is essential to formulate a correct and appropriate model for it. The TCPAR, thus, makes it possible to increase or decrease the power forwarded in the line where it is inserted in a considerable way, which makes of it an ideal tool for this kind of use. Knowing that the TCPAR does not inject any active power, it offers a good solution with a less consumption. One of the adverse effects of the TCPAR is the voltage drop which it causes in the network although it is not significant. To solve this disadvantage, it is enough to introduce a Static VAR Compensator ‘SVC’ into the electrical network which will compensate the voltages fall and will bring them back to an acceptable level.

Spacetime algebra as a powerful tool for electromagnetism

Energy Technology Data Exchange (ETDEWEB)

Dressel, Justin, E-mail: prof.justin.dressel@gmail.com [Department of Electrical and Computer Engineering, University of California, Riverside, CA 92521 (United States); Center for Emergent Matter Science (CEMS), RIKEN, Wako-shi, Saitama, 351-0198 (Japan); Bliokh, Konstantin Y. [Center for Emergent Matter Science (CEMS), RIKEN, Wako-shi, Saitama, 351-0198 (Japan); Interdisciplinary Theoretical Science Research Group (iTHES), RIKEN, Wako-shi, Saitama, 351-0198 (Japan); Nori, Franco [Center for Emergent Matter Science (CEMS), RIKEN, Wako-shi, Saitama, 351-0198 (Japan); Physics Department, University of Michigan, Ann Arbor, MI 48109-1040 (United States)

2015-08-08

We present a comprehensive introduction to spacetime algebra that emphasizes its practicality and power as a tool for the study of electromagnetism. We carefully develop this natural (Clifford) algebra of the Minkowski spacetime geometry, with a particular focus on its intrinsic (and often overlooked) complex structure. Notably, the scalar imaginary that appears throughout the electromagnetic theory properly corresponds to the unit 4-volume of spacetime itself, and thus has physical meaning. The electric and magnetic fields are combined into a single complex and frame-independent bivector field, which generalizes the Riemann–Silberstein complex vector that has recently resurfaced in studies of the single photon wavefunction. The complex structure of spacetime also underpins the emergence of electromagnetic waves, circular polarizations, the normal variables for canonical quantization, the distinction between electric and magnetic charge, complex spinor representations of Lorentz transformations, and the dual (electric–magnetic field exchange) symmetry that produces helicity conservation in vacuum fields. This latter symmetry manifests as an arbitrary global phase of the complex field, motivating the use of a complex vector potential, along with an associated transverse and gauge-invariant bivector potential, as well as complex (bivector and scalar) Hertz potentials. Our detailed treatment aims to encourage the use of spacetime algebra as a readily available and mature extension to existing vector calculus and tensor methods that can greatly simplify the analysis of fundamentally relativistic objects like the electromagnetic field.

Spacetime algebra as a powerful tool for electromagnetism

Science.gov (United States)

Dressel, Justin; Bliokh, Konstantin Y.; Nori, Franco

2015-08-01

We present a comprehensive introduction to spacetime algebra that emphasizes its practicality and power as a tool for the study of electromagnetism. We carefully develop this natural (Clifford) algebra of the Minkowski spacetime geometry, with a particular focus on its intrinsic (and often overlooked) complex structure. Notably, the scalar imaginary that appears throughout the electromagnetic theory properly corresponds to the unit 4-volume of spacetime itself, and thus has physical meaning. The electric and magnetic fields are combined into a single complex and frame-independent bivector field, which generalizes the Riemann-Silberstein complex vector that has recently resurfaced in studies of the single photon wavefunction. The complex structure of spacetime also underpins the emergence of electromagnetic waves, circular polarizations, the normal variables for canonical quantization, the distinction between electric and magnetic charge, complex spinor representations of Lorentz transformations, and the dual (electric-magnetic field exchange) symmetry that produces helicity conservation in vacuum fields. This latter symmetry manifests as an arbitrary global phase of the complex field, motivating the use of a complex vector potential, along with an associated transverse and gauge-invariant bivector potential, as well as complex (bivector and scalar) Hertz potentials. Our detailed treatment aims to encourage the use of spacetime algebra as a readily available and mature extension to existing vector calculus and tensor methods that can greatly simplify the analysis of fundamentally relativistic objects like the electromagnetic field.

Offers

CERN Multimedia

Staff Association

2015-01-01

New season 2015-2016 The new season was revealed in May, and was warmly welcomed by the press, which is especially enthusiastic about the exceptional arrival of Fanny Ardand in September in the framework of Cassandre show. Discover the programme 2015-2016. The theatre La Comédie proposes different offers to our members Benefit from a reduction of 20 % on a full price ticket during all the season: from 38 CHF to 23 CHF ticket instead of 50 CHF to 30 CHF depending on the show. Buy two seasonal tickets at the price of one (offers valid upon availability, and until 30 september 2015) 2 Cards Libertà for 240 CHF instead of 480 CHF. Cruise freely through the season with 8 perfomances of your choice per season. These cards are transferrable, and can be shared with one or more accompanying persons. 2 Abo Piccolo for 120 CHF instead of 240 CHF. Let yourself be surprised a theatre performance with our discovery seasonal tickets, which includes 4 flagship perfomances for the season. ...

Marketing Power Tools for Building Better Connections.

Science.gov (United States)

Goldman, Karen Denard

This paper proposes use of marketing methods to improve college health services and enhance their perceived value. Ten key marketing principles are defined: (1) value of the service as seen by the target population; (2) exchange clients perceive benefits received as exceeding perceived costs; (3) competition offering a better product than the…

A novel gripper design for multi hand tools grasping under tight clearance constraints and external torque effect

KAUST Repository

Shaqura, Mohammad

2017-08-29

A robotic multi tool gripper design and implementation is presented in this paper. The proposed design targets applications where an actuation task is performed using a wide selection of standard hand tools. The manipulation motion is assumed to be rotational which requires a firm grip to account for external torque on the grasped tool. The setup is assumed to be a conventional workshop panel with hand tools being hanged close to each other, which constraints lateral clearance around the target, and near the wall of the panel, which constraints the depth clearance. Off the shelf grippers are mostly heavy and bulky which make them unsuitable for these requirements. Moreover, they are not optimized in terms of power consumption, simplicity and compactness. These generic grippers are mostly designed for pick and place tasks where no external torques other than those caused by the object weight affects the gripper. The design challenge involves building a gripper that is capable of operating in limited clearance space, firmly grip a variety of standard hand tools with different sizes and shapes. The proposed design is optimized for these objectives and offers a low cost and power consumption solution. The design has been validated in lab and outdoor experiments and has been deployed in real operating platform used in an international robotics competition.

Development of a non-contact diagnostic tool for high power lasers

Science.gov (United States)

Simmons, Jed A.; Guttman, Jeffrey L.; McCauley, John

2016-03-01

High power lasers in excess of 1 kW generate enough Rayleigh scatter, even in the NIR, to be detected by silicon based sensor arrays. A lens and camera system in an off-axis position can therefore be used as a non-contact diagnostic tool for high power lasers. Despite the simplicity of the concept, technical challenges have been encountered in the development of an instrument referred to as BeamWatch. These technical challenges include reducing background radiation, achieving high signal to noise ratio, reducing saturation events caused by particulates crossing the beam, correcting images to achieve accurate beam width measurements, creating algorithms for the removal of non-uniformities, and creating two simultaneous views of the beam from orthogonal directions. Background radiation in the image was reduced by the proper positioning of the back plane and the placement of absorbing materials on the internal surfaces of BeamWatch. Maximizing signal to noise ratio, important to the real-time monitoring of focus position, was aided by increasing lens throughput. The number of particulates crossing the beam path was reduced by creating a positive pressure inside BeamWatch. Algorithms in the software removed non-uniformities in the data prior to generating waist width, divergence, BPP, and M2 results. A dual axis version of BeamWatch was developed by the use of mirrors. By its nature BeamWatch produced results similar to scanning slit measurements. Scanning slit data was therefore taken and compared favorably with BeamWatch results.

Offers

CERN Multimedia

Staff Association

2013-01-01

SPECIAL OFFER FOR OUR MEMBERS Prices Spring and Summer 2013 Day ticket: same price weekends, public holidays and weekdays: Children from 5 to 15 years old: 30 CHF instead of 39 CHF Adults from 16 years old: 36 CHF instead of 49 CHF Bonus! Free for children under 5 Tickets available at the Staff Association Secretariat.

Offers

CERN Multimedia

Association du personnel

2013-01-01

SPECIAL OFFER FOR OUR MEMBERS Prices Spring and Summer 2013 Day ticket: same price weekends, public holidays and weekdays: – Children from 5 to 15 years old: 30 CHF instead of 39 CHF – Adults from 16 years old: 36 CHF instead of 49 CHF – Bonus! Free for children under 5 Tickets available at the Staff Association Secretariat.

Marketing eco-power - still lots to be done

International Nuclear Information System (INIS)

Baettig, I.

2005-01-01

This article takes a look at the various eco-power offers that can currently be found on the Swiss electricity market. Various electricity utilities offer ecologically produced power in various qualities under several different names. These range from pure solar power through to various mixes of solar, wind and hydro power. The varying marketing approaches used are discussed. Local utilities have the most success in selling eco-power, whereas a large Swiss supermarket chain had difficulty selling its customers certificates for renewable electricity. This, according to the chain's speaker, was due to the difficulty of explaining the relationship between production certificates and the actual power drawn from the wall socket. The offers of various utilities and independent power producers are looked at and discussed with those responsible

COMSY - A Software Tool for Aging and Plant Life Management

International Nuclear Information System (INIS)

Zander, Andre; Nopper, Helmut

2012-01-01

A Plant-wide and systematic Aging and Plant Life Management is essential for the safe operation and/or availability of nuclear power plants. The Aging Management (AM) has the objective to monitor and control degradation effects for safety relevant Systems, Structures and Components (SSCs) which may compromise safety functions of the plant. The Plant Life Management (PLM) methodology also includes aging surveillance for availability relevant SSCs. AM and PLM cover mechanical components, electrical and I and C systems and civil structures All Aging and Plant Life Management rules call for a comprehensive approach, requiring the systematic collection of various aging and safety relevant data on a plant-wide basis. This data needs to be serviced and periodically evaluated. Due to the complexity of the process, this activity needs to be supported by a qualified software tool for the management of aging relevant data and associated documents (approx. 30 000 SSCs). In order to support the power plant operators AREVA NP has developed the software tool COMSY. The COMSY software with its integrated AM modules enables the design and setup of a knowledge-based power plant model compatible to the requirements of international and national rules (e.g. IAEA Safety Guide NS-G-2.12, KTA 1403). In this process, a key task is to identify and monitor degradation mechanisms. For this purpose the COMSY tool provides prognosis and trending functions, which are based on more than 30 years of experience in the evaluation of degradation effects and numerous experimental studies. Since 1998 COMSY has been applied successfully in more than fifty reactor units in this field. The current version 3.0 was revised completely and offers additional AM functions. All aging-relevant component data are compiled and allocated via an integrated power plant model. Owing to existing interfaces to other software solutions and flexible import functions, COMSY is highly compatible with already existing data

Game development tool essentials

CERN Document Server

Berinstein, Paula; Ardolino, Alessandro; Franco, Simon; Herubel, Adrien; McCutchan, John; Nedelcu, Nicusor; Nitschke, Benjamin; Olmstead, Don; Robinet, Fabrice; Ronchi, Christian; Turkowski, Rita; Walter, Robert; Samour, Gustavo

2014-01-01

Offers game developers new techniques for streamlining the critical game tools pipeline. Inspires game developers to share their secrets and improve the productivity of the entire industry. Helps game industry practitioners compete in a hyper-competitive environment.

AMS. A powerful tool for probing nucleosynthesis via long-lived radionuclides

International Nuclear Information System (INIS)

Wallner, A.; Golser, R.; Kutschera, W.; Priller, A.; Steier, P.; Kaeppeler, F.

2005-01-01

The potential of accelerator mass spectrometry (AMS) will be demonstrated on typical radionuclides of interest with half-lives between some years and up to hundred million years. The Vienna Environmental Research Accelerator (VERA) represents a state-of-the-art AMS facility which provides the ability for quantifying nuclides over the whole mass range. At VERA, AMS is used for quantifying long-lived radionuclides within a wide range of applications - from archaeology to astrophysics. Lack of information on cross section data exists for a list of nuclides pointed out by nuclear data requests. The potential of AMS as a powerful tool for probing nucleosynthesis will be demonstrated by means of some prime examples. Recent developments in the technique of AMS will be highlighted and some applications of AMS in astrophysics will be discussed. In addition, an overview on detection limits, measurement precision as well as the recent measurement program at VERA for quantifying such long-lived radionuclides will be presented. (author)

Offers

CERN Multimedia

Staff Association

2012-01-01

SPECIAL OFFER FOR OUR MEMBERS Single tariff Adulte/Enfant Tickets “Zone terrestre” 20 euros instead of 25 euros. Access to Aqualibi: 5 euros instead of 8 euros on presentation of your ticket SA member. Free for children under 3, with limited access to the attractions. More information on our website : http://association.web.cern.ch/association/en/OtherActivities/Walibi.html

Combined Heat and Power (CHP) as a Compliance Option under the Clean Power Plan: A Template and Policy Options for State Regulators

Energy Technology Data Exchange (ETDEWEB)

None

2015-07-30

Combined Heat and Power (CHP) is an important option for states to consider in developing strategies to meet their emission targets under the US Environmental Protection Agency's Clean Power Plan. This Template is designed to highlight key issues that states should consider when evaluating whether CHP could be a meaningful component of their compliance plans. It demonstrates that CHP can be a valuable approach for reducing emissions and helping states achieve their targets. While the report does not endorse any particular approach for any state, and actual plans will vary dependent upon state-specific factors and determinations, it provides tools and resources that states can use to begin the process, and underscores the opportunity CHP represents for many states. . By producing both heat and electricity from a single fuel source, CHP offers significant energy savings and carbon emissions benefits over the separate generation of heat and power, with a typical unit producing electricity with half the emissions of conventional generation. These efficiency gains translate to economic savings and enhanced competitiveness for CHP hosts, and emissions reductions for the state, along with helping to lower electric bills; and creating jobs in the design, construction, installation and maintenance of equipment. In 2015, CHP represents 8 percent of electric capacity in the United States and provides 12 percent of total power generation. Projects already exist in all 50 states, but significant technical and economic potential remains. CHP offers a tested way for states to achieve their emission limits while advancing a host of ancillary benefits.

New Teaching Environments Near Real-World-Like Laboratories for Power Engineering

DEFF Research Database (Denmark)

Holbøll, Joachim; Østergaard, Jacob

2014-01-01

, and operating real-world systems. The tool to be presented here is mainly establishment of teaching facilities at the Technical University of Denmark adjacent to the research facilities and where nearness to the ‘real world’ is essential and implemented by clearly visible research activities and by close......The Technical University of Denmark offers educations within power engineering at all levels: bachelor, master and PhD. Relevant bachelor programs use the CDIO educational framework, which allows the students to learn engineering fundaments in a context of conceiving, designing, implementing...

DEVELOPMENT OF A STRATEGIC MANAGEMENT TOOL IN A THERMAL POWER PLANT USING ABC AND BSC MODELS

Directory of Open Access Journals (Sweden)

Rishi Dwivedi

2016-05-01

Full Text Available In today’s dynamic, uncertain and highly competitive business environment, the long term success of an organization critically depends on the perceptions, choices and actions of its managers regarding their strategies. Activity based costing (ABC and balanced scorecard (BSC are the modern day management approaches acknowledged as reliable tools for strategy formulation and implementation in an organization. In this paper, ABC and BSC models are separately proposed and applied in the merry-go-round (MGR department of an Indian thermal power plant. The results elicited from adoption of these two models in the said power plant provide more accurate, timely, and reliable operational and financial information at different activity levels of the organization, which would help in effective strategic and tactical decision making. Even though, there are limited published research papers related to application of ABC model in power plants, none of them has adopted ABC and BSC techniques in an Indian contextual environment. Additionally, an integrated ABC-BSC model is designed to harness the complementary synergies of both ABC and BSC models.

IT-tools for Mechatronic System Engineering and Design

DEFF Research Database (Denmark)

Conrad, Finn; Sørensen, Torben; Andersen, T. O.

2003-01-01

Companies are facing the on-going challenge that customers always increase their needs for capability of products and machinery. They want improved productivity and efficiency - if possible to lower prices; value for money. The demands often focus on extensions of functionality, faster response......, operation capability, man-machine interface (MMI), robustness, reliability and safety in use. Information Technology (IT) offers both software and hardware for improvement of the engineering design and industrial applications. The latest progress in IT makes integration of an overall design...... the Esprit project SWING on IT-tools for rapid prototyping of fluid power components and systems. A mechatronic test facility for a hydraulic robot and a CNC XY-machine table was implemented. The controller applies digital signal processors (DSPs). The DSP controller utilizes the dSPACE System suitable...

12 CFR 563g.21 - Filing of copies of offering circulars in certain exempt offerings.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Filing of copies of offering circulars in certain exempt offerings. 563g.21 Section 563g.21 Banks and Banking OFFICE OF THRIFT SUPERVISION, DEPARTMENT OF THE TREASURY SECURITIES OFFERINGS § 563g.21 Filing of copies of offering circulars in certain...

Offers

CERN Multimedia

Staff Association

2012-01-01

SPECIAL OFFER FOR OUR MEMBERS Prices Spring and Summer 2012 Half-day ticket: 5 hours, same price weekends, public holidays and weekdays. Children from 5 to 15 years old: 26 CHF instead of 35 CHF Adults from 16 years old: 32 CHF instead of 43 CHF Bonus! Free for children under 5. Aquaparc Les Caraïbes sur Léman 1807 Le Bouveret (VS)

Program Development Tools and Infrastructures

International Nuclear Information System (INIS)

Schulz, M.

2012-01-01

Exascale class machines will exhibit a new level of complexity: they will feature an unprecedented number of cores and threads, will most likely be heterogeneous and deeply hierarchical, and offer a range of new hardware techniques (such as speculative threading, transactional memory, programmable prefetching, and programmable accelerators), which all have to be utilized for an application to realize the full potential of the machine. Additionally, users will be faced with less memory per core, fixed total power budgets, and sharply reduced MTBFs. At the same time, it is expected that the complexity of applications will rise sharply for exascale systems, both to implement new science possible at exascale and to exploit the new hardware features necessary to achieve exascale performance. This is particularly true for many of the NNSA codes, which are large and often highly complex integrated simulation codes that push the limits of everything in the system including language features. To overcome these limitations and to enable users to reach exascale performance, users will expect a new generation of tools that address the bottlenecks of exascale machines, that work seamlessly with the (set of) programming models on the target machines, that scale with the machine, that provide automatic analysis capabilities, and that are flexible and modular enough to overcome the complexities and changing demands of the exascale architectures. Further, any tool must be robust enough to handle the complexity of large integrated codes while keeping the user's learning curve low. With the ASC program, in particular the CSSE (Computational Systems and Software Engineering) and CCE (Common Compute Environment) projects, we are working towards a new generation of tools that fulfill these requirements and that provide our users as well as the larger HPC community with the necessary tools, techniques, and methodologies required to make exascale performance a reality.

Program Development Tools and Infrastructures

Energy Technology Data Exchange (ETDEWEB)

Schulz, M

2012-03-12

Exascale class machines will exhibit a new level of complexity: they will feature an unprecedented number of cores and threads, will most likely be heterogeneous and deeply hierarchical, and offer a range of new hardware techniques (such as speculative threading, transactional memory, programmable prefetching, and programmable accelerators), which all have to be utilized for an application to realize the full potential of the machine. Additionally, users will be faced with less memory per core, fixed total power budgets, and sharply reduced MTBFs. At the same time, it is expected that the complexity of applications will rise sharply for exascale systems, both to implement new science possible at exascale and to exploit the new hardware features necessary to achieve exascale performance. This is particularly true for many of the NNSA codes, which are large and often highly complex integrated simulation codes that push the limits of everything in the system including language features. To overcome these limitations and to enable users to reach exascale performance, users will expect a new generation of tools that address the bottlenecks of exascale machines, that work seamlessly with the (set of) programming models on the target machines, that scale with the machine, that provide automatic analysis capabilities, and that are flexible and modular enough to overcome the complexities and changing demands of the exascale architectures. Further, any tool must be robust enough to handle the complexity of large integrated codes while keeping the user's learning curve low. With the ASC program, in particular the CSSE (Computational Systems and Software Engineering) and CCE (Common Compute Environment) projects, we are working towards a new generation of tools that fulfill these requirements and that provide our users as well as the larger HPC community with the necessary tools, techniques, and methodologies required to make exascale performance a reality.

The Arabidopsis co-expression tool (act): a WWW-based tool and database for microarray-based gene expression analysis

DEFF Research Database (Denmark)

Jen, C. H.; Manfield, I. W.; Michalopoulos, D. W.

2006-01-01

be examined using the novel clique finder tool to determine the sets of genes most likely to be regulated in a similar manner. In combination, these tools offer three levels of analysis: creation of correlation lists of co-expressed genes, refinement of these lists using two-dimensional scatter plots......We present a new WWW-based tool for plant gene analysis, the Arabidopsis Co-Expression Tool (act) , based on a large Arabidopsis thaliana microarray data set obtained from the Nottingham Arabidopsis Stock Centre. The co-expression analysis tool allows users to identify genes whose expression...

Power1D: a Python toolbox for numerical power estimates in experiments involving one-dimensional continua

Directory of Open Access Journals (Sweden)

Todd C. Pataky

2017-07-01

Full Text Available The unit of experimental measurement in a variety of scientific applications is the one-dimensional (1D continuum: a dependent variable whose value is measured repeatedly, often at regular intervals, in time or space. A variety of software packages exist for computing continuum-level descriptive statistics and also for conducting continuum-level hypothesis testing, but very few offer power computing capabilities, where ‘power’ is the probability that an experiment will detect a true continuum signal given experimental noise. Moreover, no software package yet exists for arbitrary continuum-level signal/noise modeling. This paper describes a package called power1d which implements (a two analytical 1D power solutions based on random field theory (RFT and (b a high-level framework for computational power analysis using arbitrary continuum-level signal/noise modeling. First power1d’s two RFT-based analytical solutions are numerically validated using its random continuum generators. Second arbitrary signal/noise modeling is demonstrated to show how power1d can be used for flexible modeling well beyond the assumptions of RFT-based analytical solutions. Its computational demands are non-excessive, requiring on the order of only 30 s to execute on standard desktop computers, but with approximate solutions available much more rapidly. Its broad signal/noise modeling capabilities along with relatively rapid computations imply that power1d may be a useful tool for guiding experimentation involving multiple measurements of similar 1D continua, and in particular to ensure that an adequate number of measurements is made to detect assumed continuum signals.

Optimal offering and operating strategies for wind-storage systems with linear decision rules

DEFF Research Database (Denmark)

Ding, Huajie; Pinson, Pierre; Hu, Zechun

2016-01-01

The participation of wind farm-energy storage systems (WF-ESS) in electricity markets calls for an integrated view of day-ahead offering strategies and real-time operation policies. Such an integrated strategy is proposed here by co-optimizing offering at the day-ahead stage and operation policy...... to be used at the balancing stage. Linear decision rules are seen as a natural approach to model and optimize the real-time operation policy. These allow enhancing profits from balancing markets based on updated information on prices and wind power generation. Our integrated strategies for WF...

Evidentiary Power and Propriety of Digital Identifiers and the Impact on Privacy Rights in the United States

Directory of Open Access Journals (Sweden)

Michael Losavio

2014-09-01

Full Text Available Media and network systems capture and store data about electronic activity in new, sometimes unprecedented ways; computational systems make for new means of analysis and knowledge development. These new forms offer new, powerful tactical tools for investigations of electronic malfeasance under traditional legal regulation of state power, particular that of Fourth Amendment limitations on police searches and seizures under the U.S. Constitution. But autonomy, identity and authenticity concerns with electronic data raise issues of public policy, privacy and proper police oversight of civil society. We examine those issues and their implications for digital and computational forensics.

The situation of European power supply

International Nuclear Information System (INIS)

Zimmer, H.J.

2008-01-01

The requirement for energy worldwide is going to rise dramatically in the next few years and decades. Despite all developments of renewable energy sources, and despite the expansion of nuclear power in some industrialized countries and emerging countries, coal will turn out to be the key source of energy in the 21st century. Europe as a whole has a lot to offer which strengthens its position with respect to present and future requirements to be met in the construction of new power plants as well as in electricity and power supplies. As regards nuclear power in Germany, if it is to be given another chance, we must seek a dialog, pointing out that - nuclear power offers advantages in ensuring energy supply in Germany, given the development in the world energy markets; - nuclear power makes an important contribution to climate protection; - Germany's energy supply must be adapted to the global situation; - nuclear power offers opportunities in education, training, research and development; - nuclear power is contributing massively to our economic prosperity. The future viability of European power supply will not depend on the debate about nuclear power in Germany. The debate will be decided chiefly by the world market and on a European level. (orig.)

M4D: a powerful tool for structured programming at assembly level for MODCOMP computers

International Nuclear Information System (INIS)

Shah, R.R.; Basso, R.A.J.

1984-04-01

Structured programming techniques offer numerous benefits for software designers and form the basis of the current high level languages. However, these techniques are generally not available to assembly programmers. The M4D package was therefore developed for a large project to enable the use of structured programming constructs such as DO.WHILE-ENDDO and IF-ORIF-ORIF...-ELSE-ENDIF in the assembly code for MODCOMP computers. Programs can thus be produced that have clear semantics and are considerably easier to read than normal assembly code, resulting in reduced program development and testing effort, and in improved long-term maintainability of the code. This paper describes the M4D structured programming tool as implemented for MODCOMP'S MAX III and MAX IV assemblers, and illustrates the use of the facility with a number of examples

Mouse Models for Drug Discovery. Can New Tools and Technology Improve Translational Power?

Science.gov (United States)

Zuberi, Aamir; Lutz, Cathleen

2016-01-01

Abstract The use of mouse models in biomedical research and preclinical drug evaluation is on the rise. The advent of new molecular genome-altering technologies such as CRISPR/Cas9 allows for genetic mutations to be introduced into the germ line of a mouse faster and less expensively than previous methods. In addition, the rapid progress in the development and use of somatic transgenesis using viral vectors, as well as manipulations of gene expression with siRNAs and antisense oligonucleotides, allow for even greater exploration into genomics and systems biology. These technological advances come at a time when cost reductions in genome sequencing have led to the identification of pathogenic mutations in patient populations, providing unprecedented opportunities in the use of mice to model human disease. The ease of genetic engineering in mice also offers a potential paradigm shift in resource sharing and the speed by which models are made available in the public domain. Predictively, the knowledge alone that a model can be quickly remade will provide relief to resources encumbered by licensing and Material Transfer Agreements. For decades, mouse strains have provided an exquisite experimental tool to study the pathophysiology of the disease and assess therapeutic options in a genetically defined system. However, a major limitation of the mouse has been the limited genetic diversity associated with common laboratory mice. This has been overcome with the recent development of the Collaborative Cross and Diversity Outbred mice. These strains provide new tools capable of replicating genetic diversity to that approaching the diversity found in human populations. The Collaborative Cross and Diversity Outbred strains thus provide a means to observe and characterize toxicity or efficacy of new therapeutic drugs for a given population. The combination of traditional and contemporary mouse genome editing tools, along with the addition of genetic diversity in new modeling

Mouse Models for Drug Discovery. Can New Tools and Technology Improve Translational Power?

Science.gov (United States)

Zuberi, Aamir; Lutz, Cathleen

2016-12-01

The use of mouse models in biomedical research and preclinical drug evaluation is on the rise. The advent of new molecular genome-altering technologies such as CRISPR/Cas9 allows for genetic mutations to be introduced into the germ line of a mouse faster and less expensively than previous methods. In addition, the rapid progress in the development and use of somatic transgenesis using viral vectors, as well as manipulations of gene expression with siRNAs and antisense oligonucleotides, allow for even greater exploration into genomics and systems biology. These technological advances come at a time when cost reductions in genome sequencing have led to the identification of pathogenic mutations in patient populations, providing unprecedented opportunities in the use of mice to model human disease. The ease of genetic engineering in mice also offers a potential paradigm shift in resource sharing and the speed by which models are made available in the public domain. Predictively, the knowledge alone that a model can be quickly remade will provide relief to resources encumbered by licensing and Material Transfer Agreements. For decades, mouse strains have provided an exquisite experimental tool to study the pathophysiology of the disease and assess therapeutic options in a genetically defined system. However, a major limitation of the mouse has been the limited genetic diversity associated with common laboratory mice. This has been overcome with the recent development of the Collaborative Cross and Diversity Outbred mice. These strains provide new tools capable of replicating genetic diversity to that approaching the diversity found in human populations. The Collaborative Cross and Diversity Outbred strains thus provide a means to observe and characterize toxicity or efficacy of new therapeutic drugs for a given population. The combination of traditional and contemporary mouse genome editing tools, along with the addition of genetic diversity in new modeling systems

Offers INTERSOCCER

CERN Multimedia

Staff Association

2014-01-01

  Summer Football camps   New offer to the members of the Staff Association – INTERSOCCER: 12% discount on summer football camps and courses for children (bilingual) so do not hesitate anymore!    

Offer

CERN Multimedia

CARLSON WAGONLIT TRAVEL

2011-01-01

Special offer   From 14th to 28th February 2011: no CWT service fee! For any new reservation of a holiday package (flight + hotel/apartment) from a catalog “summer 2011” For any additional information our staff is at your disposal from Monday – Friday, from 8h30 to 16h30. Phone number 72763 or 72797 Carlson Wagonlit Tavel, Agence du CERN  

Web-based communication tools in a European research project: the example of the TRACE project

Directory of Open Access Journals (Sweden)

Baeten V.

2009-01-01

Full Text Available The multi-disciplinary and international nature of large European projects requires powerful managerial and communicative tools to ensure the transmission of information to the end-users. One such project is TRACE entitled “Tracing Food Commodities in Europe”. One of its objectives is to provide a communication system dedicated to be the central source of information on food authenticity and traceability in Europe. This paper explores the web tools used and communication vehicles offered to scientists involved in the TRACE project to communicate internally as well as to the public. Two main tools have been built: an Intranet and a public website. The TRACE website can be accessed at http://www.trace.eu.org. A particular emphasis was placed on the efficiency, the relevance and the accessibility of the information, the publicity of the website as well as the use of the collaborative utilities. The rationale of web space design as well as integration of proprietary software solutions are presented. Perspectives on the using of web tools in the research projects are discussed.

Leveraging Existing Mission Tools in a Re-Usable, Component-Based Software Environment

Science.gov (United States)

Greene, Kevin; Grenander, Sven; Kurien, James; z,s (fshir. z[orttr); z,scer; O'Reilly, Taifun

2006-01-01

Emerging methods in component-based software development offer significant advantages but may seem incompatible with existing mission operations applications. In this paper we relate our positive experiences integrating existing mission applications into component-based tools we are delivering to three missions. In most operations environments, a number of software applications have been integrated together to form the mission operations software. In contrast, with component-based software development chunks of related functionality and data structures, referred to as components, can be individually delivered, integrated and re-used. With the advent of powerful tools for managing component-based development, complex software systems can potentially see significant benefits in ease of integration, testability and reusability from these techniques. These benefits motivate us to ask how component-based development techniques can be relevant in a mission operations environment, where there is significant investment in software tools that are not component-based and may not be written in languages for which component-based tools even exist. Trusted and complex software tools for sequencing, validation, navigation, and other vital functions cannot simply be re-written or abandoned in order to gain the advantages offered by emerging component-based software techniques. Thus some middle ground must be found. We have faced exactly this issue, and have found several solutions. Ensemble is an open platform for development, integration, and deployment of mission operations software that we are developing. Ensemble itself is an extension of an open source, component-based software development platform called Eclipse. Due to the advantages of component-based development, we have been able to vary rapidly develop mission operations tools for three surface missions by mixing and matching from a common set of mission operation components. We have also had to determine how to

Coordinated clinical and financial analysis as a powerful tool to influence vendor pricing.

Science.gov (United States)

Logan, Catherine A; Wu, Roger Y; Mulley, Debra; Smith, Paul C; Schwaitzberg, Steven D

2010-01-01

-based managerial approach can create dialogue with vendors and directly impact pricing. Coordinated clinical and financial analysis is a powerful tool, enabling administrators, clinicians, and medical device suppliers to work constructively to provide patients access to innovative technology, even in the face of a challenging payer mix. Ongoing assessment of clinical outcomes and financial data must be performed to reflect the most up-to-date scientific and economic climate.

Handbook of power systems engineering with power electronics applications

CERN Document Server

Hase, Yoshihide

2012-01-01

Formerly known as Handbook of Power System Engineering, this second edition provides rigorous revisions to the original treatment of systems analysis together with a substantial new four-chapter section on power electronics applications. Encompassing a whole range of equipment, phenomena, and analytical approaches, this handbook offers a complete overview of power systems and their power electronics applications, and presents a thorough examination of the fundamental principles, combining theories and technologies that are usually treated in separate specialised fields, in a single u

Visualization of neutron flux and power distributions in TRIGA Mark II reactor as an educational tool

International Nuclear Information System (INIS)

Snoj, Luka; Ravnik, Matjaz; Lengar, Igor

2008-01-01

Modern Monte Carlo computer codes (e.g. MCNP) for neutron transport allow calculation of detailed neutron flux and power distribution in complex geometries with resolution of ∼1 mm. Moreover they enable the calculation of individual particle tracks, scattering and absorption events. With the use of advanced software for 3D visualization (e.g. Amira, Voxler, etc.) one can create and present neutron flux and power distribution in a 'user friendly' way convenient for educational purposes. One can view axial, radial or any other spatial distribution of the neutron flux and power distribution in a nuclear reactor from various perspectives and in various modalities of presentation. By visualizing the distribution of scattering and absorption events and individual particle tracks one can visualize neutron transport parameters (mean free path, diffusion length, macroscopic cross section, up-scattering, thermalization, etc.) from elementary point of view. Most of the people remember better, if they visualize the processes. Therefore the representation of the reactor and neutron transport parameters is a convenient modern educational tool for the (nuclear power plant) operators, nuclear engineers, students and specialists involved in reactor operation and design. The visualization of neutron flux and power distributions in Jozef Stefan Institute TRIGA Mark II research reactor is treated in the paper. The distributions are calculated with MCNP computer code and presented using Amira and Voxler software. The results in the form of figures are presented in the paper together with comments qualitatively explaining the figures. (authors)

Three-phase model and power-flow analysis of microgrids and virtual power plants

Energy Technology Data Exchange (ETDEWEB)

Kamh, M.Z.; Iravani, R. [Toronto Univ., ON (Canada). Dept. of Electrical and Computer Engineering, Energy Systems Group

2009-07-01

A distributed energy resources (DER) unit can be a distributed generation unit, a distributed storage unit, or a hybrid of the two. It can be dispatchable, non-dispatchable or pseudo-dispatchable. A DER unit is connected to the hosting utility directly or via an electronic converter. A three-phase model and power-flow analysis of microgrids and virtual power plants was presented. The presentation discussed DER classification; microgrids and virtual power plants; motivations and goals; and a proposed DER model and power flow approach. Validation and results were also offered. The developed algorithm was implemented in the sequence-component frame using the MATLAB platform. Case studies were offered in order to verify the accuracy of the DER model and the power-flow program. It was concluded that the developed software accommodates different DER configurations and accurately reflects their control strategies. figs.

ISMB 2016 offers outstanding science, networking, and celebration.

Science.gov (United States)

Fogg, Christiana

2016-01-01

The annual international conference on Intelligent Systems for Molecular Biology (ISMB) is the major meeting of the International Society for Computational Biology (ISCB). Over the past 23 years the ISMB conference has grown to become the world's largest bioinformatics/computational biology conference. ISMB 2016 will be the year's most important computational biology event globally. The conferences provide a multidisciplinary forum for disseminating the latest developments in bioinformatics/computational biology. ISMB brings together scientists from computer science, molecular biology, mathematics, statistics and related fields. Its principal focus is on the development and application of advanced computational methods for biological problems. ISMB 2016 offers the strongest scientific program and the broadest scope of any international bioinformatics/computational biology conference. Building on past successes, the conference is designed to cater to variety of disciplines within the bioinformatics/computational biology community.  ISMB 2016 takes place July 8 - 12 at the Swan and Dolphin Hotel in Orlando, Florida, United States. For two days preceding the conference, additional opportunities including Satellite Meetings, Student Council Symposium, and a selection of Special Interest Group Meetings and Applied Knowledge Exchange Sessions (AKES) are all offered to enable registered participants to learn more on the latest methods and tools within specialty research areas.

Offer

CERN Multimedia

Staff Association

2010-01-01

  Special offer for members of the Staff Association and their families 10% reduction on all products in the SEPHORA shop (sells perfume, beauty products etc.) in Val Thoiry ALL YEAR ROUND. Plus 20% reduction during their “vente privée”* three or four times a year. Simply present your Staff Association membership card when you make your purchase. * Next “vente privée” from 22th to 29th November 2010

Offer

CERN Multimedia

Staff Association

2011-01-01

  Special offer for members of the Staff Association and their families 10% reduction on all products in the SEPHORA shop (sells perfume, beauty products etc.) in Val Thoiry ALL YEAR ROUND. Plus 20% reduction during their “vente privée”* three or four times a year. Simply present your Staff Association membership card when you make your purchase. * Next “vente privée” from 25th to 27th March 2011  

Flexible global ocean-atmosphere-land system model. A modeling tool for the climate change research community

International Nuclear Information System (INIS)

Zhou, Tianjun; Yu, Yongqiang; Liu, Yimin; Wang, Bin

2014-01-01

First book available on systematic evaluations of the performance of the global climate model FGOALS. Covers the whole field, ranging from the development to the applications of this climate system model. Provide an outlook for the future development of the FGOALS model system. Offers brief introduction about how to run FGOALS. Coupled climate system models are of central importance for climate studies. A new model known as FGOALS (the Flexible Global Ocean-Atmosphere-Land System model), has been developed by the State Key Laboratory of Numerical Modeling for Atmospheric Sciences and Geophysical Fluid Dynamics, Institute of Atmospheric Physics, Chinese Academy of Sciences (LASG/IAP, CAS), a first-tier national geophysical laboratory. It serves as a powerful tool, both for deepening our understanding of fundamental mechanisms of the climate system and for making decadal prediction and scenario projections of future climate change. ''Flexible Global Ocean-Atmosphere-Land System Model: A Modeling Tool for the Climate Change Research Community'' is the first book to offer systematic evaluations of this model's performance. It is comprehensive in scope, covering both developmental and application-oriented aspects of this climate system model. It also provides an outlook of future development of FGOALS and offers an overview of how to employ the model. It represents a valuable reference work for researchers and professionals working within the related areas of climate variability and change.

A stock market for the electric power to the french market opening service; Une bourse de l'electricite au service de l'ouverture du marche francais

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-07-01

Less than two years after the european directive of 1996 application in France, the electricity trading operators can dispose of a new negotiation tool. The Powernext society manages the electric power exchange market. This document gives a presentation of Powernext and its main missions and offers. (A.L.B.)

48 CFR 12.205 - Offers.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Offers. 12.205 Section 12... ACQUISITION OF COMMERCIAL ITEMS Special Requirements for the Acquisition of Commercial Items 12.205 Offers. (a) Where technical information is necessary for evaluation of offers, agencies should, as part of market...

High productivity machining of holes in Inconel 718 with SiAlON tools

Science.gov (United States)

Agirreurreta, Aitor Arruti; Pelegay, Jose Angel; Arrazola, Pedro Jose; Ørskov, Klaus Bonde

2016-10-01

Inconel 718 is often employed in aerospace engines and power generation turbines. Numerous researches have proven the enhanced productivity when turning with ceramic tools compared to carbide ones, however there is considerably less information with regard to milling. Moreover, no knowledge has been published about machining holes with this type of tools. Additional research on different machining techniques, like for instance circular ramping, is critical to expand the productivity improvements that ceramics can offer. In this a 3D model of the machining and a number of experiments with SiAlON round inserts have been carried out in order to evaluate the effect of the cutting speed and pitch on the tool wear and chip generation. The results of this analysis show that three different types of chips are generated and also that there are three potential wear zones. Top slice wear is identified as the most critical wear type followed by the notch wear as a secondary wear mechanism. Flank wear and adhesion are also found in most of the tests.

An integrated simulation tool for analyzing the Operation and Interdependency of Natural Gas and Electric Power Systems

OpenAIRE

PAMBOUR Kwabena A.; CAKIR BURCIN; BOLADO LAVIN Ricardo; DIJKEMA Gerard

2016-01-01

In this paper, we present an integrated simulation tool for analyzing the interdependency of natural gas and electric power systems in terms of security of energy supply. In the first part, we develop mathematical models for the individual systems. In part two, we identify the interconnections between both systems and propose a method for coupling the combined simulation model. Next, we develop the algorithm for solving the combined system and integrate this algorithm into a simulation softwa...

Polysun. PV, wind and power-heat-cogeneration in one design tool

Energy Technology Data Exchange (ETDEWEB)

Lacoste, Baptiste; Wolf, Andreas; Witzig, Andreas [Vela Solaris AG, Winterthur (Switzerland); Maerklin, Adrian [Envergate GmbH, Horn (Switzerland)

2010-07-01

In this article, the simulation software Polysun is presented, which by its fundamental concept favors the combination of several energy sources (e.g. PV, Solarthermal, oil/gas boiler) and consumers (heating, sanitary hot water, swimming pool) in one simulation setup. It is discussed how the state-of-the-art small wind turbines and power-heat-cogeneration shall be integrated into the simulation tool Polysun. A close collaboration between Vela Solaris and the manufacturer is important for model validation as well as for the building up of the Polysun component database. Wind measurement results are presented from the manufacturer Envergate, which is a typical partner of choice for such collaboration. The modular concept of Polysun provides the ideal basis for communicating the advantages of new hybrid systems in de-centralized electicity production both for educational purposes as well as in renewable energy system marketing and sales. Physics-based simulation and prediction of system performance helps in the decision phase and supports the implementation of modern energy efficient and/or renewable energy systems. (orig.)

Customer Aggregation: An Opportunity for Green Power?

Energy Technology Data Exchange (ETDEWEB)

Holt, E.; Bird, L.

2001-02-26

We undertook research into the experience of aggregation groups to determine whether customer aggregation offers an opportunity to bring green power choices to more customers. The objectives of this report, therefore, are to (1) identify the different types of aggregation that are occurring today, (2) learn whether aggregation offers an opportunity to advance sales of green power, and (3) share these concepts and approaches with potential aggregators and green power advocates.

Nuclear-related training and education offered by academic institutions (less than baccalaureate degree) (preliminary)

International Nuclear Information System (INIS)

Howard, L.

1981-11-01

This study presents the results of a survey of academic institutions offering nuclear-related training and education at the less than baccalaureate degree level. The scope of the survey includes only those programs which have a nuclear power industry application, and excludes all programs which are affiliated with nuclear medicine. The survey instrument was distributed by the Institute of Nuclear Power Operations to 262 academic institutions. The survey universe was compiled from a number of publications that listed nuclear-related academic programs. Since the initial mailing in May 1981, ten of the institutions have been determined to no longer exist and eight other listings have been identified as duplications, thus reducing the universe to 244 institutions. Fifty-five percent of the survey population (134 institutions) responded to the questionnaire, of which 45 percent (109) were out of the survey scope and 10 percent (25) indicated they offered less than baccalaureate degree, nuclear-related programs

The modernization potential of gas turbines in the coal-fired power industry thermal and economic effectiveness

CERN Document Server

Bartnik, Ryszard

2013-01-01

The opportunity of repowering the existing condensing power stations by means of  gas turbogenerators offers an important opportunity to considerably improvement of their energy efficiency. The Modernization Potential of Gas turbines in the Coal-Fired Power Industry presents the methodology, calculation procedures and tools used to support enterprise planning for adapting power stations to dual-fuel gas-steam combined-cycle technologies. Both the conceptual and practical aspects of the conversion of existing coal-fired power plants is covered. Discussions of the feasibility, advantages and disadvantages and possible methods are supported by chapters presenting equations of energy efficiency for the conditions of repowering a power unit by installing a gas turbogenerator in a parallel system and the results of technical calculations involving the selection heating structures of heat recovery steam generators. A methodology for analyzing thermodynamic and economic effectiveness for the selection of a structure...

Power Electronics

Indian Academy of Sciences (India)

Such real time models are extremely important, as they can be included in real time simulation of sys- tems to evolve control schemes for the converters as well as to study the effect on the power system. In view of the control possibilities offered by the use of power converters and the newly emerging applications, there has ...

Offers

CERN Document Server

Staff Association

2011-01-01

Banque cantonale de Genève (BCGE) The BCGE Business partner programme devised for members of the CERN Staff Association offers personalized banking solutions with preferential conditions. The advantages are linked to salary accounts (free account keeping, internet banking, free Maestro and credit cards, etc.), mortgage lending, retirement planning, investment, credit, etc. The details of the programme and the preferential conditions are available on our website: http://association.web.cern.ch/association/en/OtherActivities/BCGE.html.  

GIS tools, courses, and learning pathways offered by The National Interagency Fuels, Fire, and Vegetation Technology Transfer (NIFTT)

Science.gov (United States)

Heather Heward; Kathy H. Schon

2009-01-01

As technology continues to evolve in the area of fuel and wildland fire management so does the need to have effective tools and training on these technologies. The National Interagency Fuels Coordination Group has chartered a team of professionals to coordinate, develop, and transfer consistent, efficient, science-based fuel and fire ecology assessment GIS tools and...

Receipt of a pediatric liver offer as the first offer reduces waitlist mortality for adult women.

Science.gov (United States)

Ge, Jin; Gilroy, Richard; Lai, Jennifer C

2018-03-31

In liver transplantation, adults with small stature have a greater susceptibility to waitlist mortality. This may explain the persistent waitlist mortality disparity that exists for women. We hypothesized that women who receive early offers of pediatric donor livers have improved waitlist survival, and that preferentially offering these organs to women mitigates this sex-based disparity. We analyzed donor liver offers from 2010 to 2014. Adult candidates who received a first offer that ranked within the first three match run positions from the donors' perspective were classified based on gender and whether they received a pediatric versus adult offer. We used competing risks regression to associate first offer type and waitlist mortality. 8,101 waitlist candidates received a first offer that was ranked within the first three match run positions: 5.6% (293/5,202) men and 6.2% (179/2,899) women received a pediatric donor liver as their first offer. In multivariable analyses, compared to adult-first men, adult-first women (sHR1.33, 95%CI 1.17-1.51, p offer had a lower risk of waitlist mortality compared to those who receive adult offers. Our data provides a simple approach to mitigating the increased waitlist mortality experienced by women by incorporating donor and recipient size, as variables, into organ allocation. This article is protected by copyright. All rights reserved. © 2018 by the American Association for the Study of Liver Diseases.

Tool-Based Curricula and Visual Learning

Directory of Open Access Journals (Sweden)

Dragica Vasileska

2013-12-01

representative of ACUTE isSCHRED, which has 97 citations in research papers and is themost popular tool on nanoHUB.org.Surveys were collected from three courses offered at ArizonaState University. These courses were: EEE434/591, the QuantumMechanics class offered in the fall 2007; EEE 101 EngineeringDesign, offered in the spring 2008; and EEE533 SemiconductorManuscript received 2 December 2013. Received in revised form 25December 2013. Accepted for publication 26 December 2013.This work was financially supported from NSF Grant under grant No. NSFECS 0901251 is also acknowledged.This work was presented at the 9th, European conference on e-Learning(2010.Dragica Vasileska is with the Arizona State University, Tempe, AZ USA(phone: +1-480-965-6651; e-mail: Vasileska@asu.edu.Gerhard Klimeck is with Purdue University, West Lafayette, IN USA (email:gekco@purdue.edu.A. Magana is with Purdue University, West Lafayette, IN USA (e-mail:admagana@purdue.edu.S. M. Goodnick is with the Arizona State University, Tempe, AZ USA (email:stephen.goodnick@asu.edu.Device and Process Simulation, offered in the fall 2009. Thestudy consisted of students participating in a voluntary Likertscalesurvey that focused on: Learning outcomes, Evidence of thelearning, Pedagogical approach and Usability aspects. Inparticular, the survey investigated how intuitive the tools are.The results of the study identified differences in the waystudents perceived the nanoHUB.org simulation tools. Graduateand undergraduate students reported more positive experienceswith nanoHUB.org simulations than freshman students did.Potential explanations for these differences are: a freshmanstudents have not fully developed graphical literacy skills; bstudents may lack the prior knowledge required at the time theyinteract with the tool; and c students may lack interests in thetopic and have not yet seen the value of how these tools can beapplied toward their own learning goals. A potential support toovercome some of these difficulties may

Language as a Symbol of Identity and a Tool of Politics and Power in Pakistan and Bangladesh

Directory of Open Access Journals (Sweden)

Rácová Anna

2016-12-01

Full Text Available This study aims to demonstrate the roles that domestic and foreign languages have played and play as signs of national or religious identity and social prestige and as tools of political and economic power in multilingual Pakistan and Bangladesh. Before the countries gained independence from the British Empire in 1947 and before the formation of the Indian Union and Pakistan (which was divided into Pakistan and Bangladesh in 1971, the role of an official language, remote to the majority of population in Indian subcontinent, had been gradually played by Sanskrit, Persian, and English. After gaining independence, the new countries decided to replace English as the official language with domestic languages. Their efforts encountered many problems and resulted in various solutions. Urdu became the state language in Pakistan, which caused resistance in local ethnolinguistic groups because the language had been imported by refugees from India. This resistance was the strongest in East Pakistan, where a strong national and language awareness eventually contributed to the formation of an independent Bangladesh with Bengali as the state language. Despite struggle for the dominance of domestic languages, English has preserved its prestigious position both in Pakistan and Bangladesh, as a symbol of higher social position, a language of education and science, and a tool of economic and political power.

48 CFR 225.503 - Group offers.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Group offers. 225.503... OF DEFENSE SOCIOECONOMIC PROGRAMS FOREIGN ACQUISITION Evaluating Foreign Offers-Supply Contracts 225.503 Group offers. Evaluate group offers in accordance with FAR 25.503, but apply the evaluation...

DR2DI: a powerful computational tool for predicting novel drug-disease associations

Science.gov (United States)

Lu, Lu; Yu, Hua

2018-05-01

Finding the new related candidate diseases for known drugs provides an effective method for fast-speed and low-risk drug development. However, experimental identification of drug-disease associations is expensive and time-consuming. This motivates the need for developing in silico computational methods that can infer true drug-disease pairs with high confidence. In this study, we presented a novel and powerful computational tool, DR2DI, for accurately uncovering the potential associations between drugs and diseases using high-dimensional and heterogeneous omics data as information sources. Based on a unified and extended similarity kernel framework, DR2DI inferred the unknown relationships between drugs and diseases using Regularized Kernel Classifier. Importantly, DR2DI employed a semi-supervised and global learning algorithm which can be applied to uncover the diseases (drugs) associated with known and novel drugs (diseases). In silico global validation experiments showed that DR2DI significantly outperforms recent two approaches for predicting drug-disease associations. Detailed case studies further demonstrated that the therapeutic indications and side effects of drugs predicted by DR2DI could be validated by existing database records and literature, suggesting that DR2DI can be served as a useful bioinformatic tool for identifying the potential drug-disease associations and guiding drug repositioning. Our software and comparison codes are freely available at https://github.com/huayu1111/DR2DI.

DR2DI: a powerful computational tool for predicting novel drug-disease associations

Science.gov (United States)

Lu, Lu; Yu, Hua

2018-04-01

Finding the new related candidate diseases for known drugs provides an effective method for fast-speed and low-risk drug development. However, experimental identification of drug-disease associations is expensive and time-consuming. This motivates the need for developing in silico computational methods that can infer true drug-disease pairs with high confidence. In this study, we presented a novel and powerful computational tool, DR2DI, for accurately uncovering the potential associations between drugs and diseases using high-dimensional and heterogeneous omics data as information sources. Based on a unified and extended similarity kernel framework, DR2DI inferred the unknown relationships between drugs and diseases using Regularized Kernel Classifier. Importantly, DR2DI employed a semi-supervised and global learning algorithm which can be applied to uncover the diseases (drugs) associated with known and novel drugs (diseases). In silico global validation experiments showed that DR2DI significantly outperforms recent two approaches for predicting drug-disease associations. Detailed case studies further demonstrated that the therapeutic indications and side effects of drugs predicted by DR2DI could be validated by existing database records and literature, suggesting that DR2DI can be served as a useful bioinformatic tool for identifying the potential drug-disease associations and guiding drug repositioning. Our software and comparison codes are freely available at https://github.com/huayu1111/DR2DI.

Online Manufacturing Training. ToolingU Review (U)

Energy Technology Data Exchange (ETDEWEB)

Montano, Joshua Daniel [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2016-03-23

The following report is a review of ToolingU, an online manufacturing training website. ToolingU provided the author with a trail account where a number of courses were taken and the overall program was evaluated. A review of the classes revealed that most of the offerings directly align with work at the Laboratory. Ease of use, effectiveness of the system and price all make ToolingU an attractive option for manufacturing training needs.

An Introduction to Solar Decision-Making Tools

Energy Technology Data Exchange (ETDEWEB)

Mow, Benjamin [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2017-09-12

The National Renewable Energy Laboratory (NREL) offers a variety of models and analysis tools to help decision makers evaluate and make informed decisions about solar projects, policies, and programs. This fact sheet aims to help decision makers determine which NREL tool to use for a given solar project or policy question, depending on its scope.

Active power line conditioners design, simulation and implementation for improving power quality

CERN Document Server

Revuelta, Patricio Salmeron; Litrán, Salvador Pérez

2015-01-01

Active Power Line Conditioners: Design, Simulation and Implementation for Improving Power Quality presents a rigorous theoretical and practical approach to active power line conditioners, one of the subjects of most interest in the field of power quality. Its broad approach offers a journey that will allow power engineering professionals, researchers, and graduate students to learn more about the latest landmarks on the different APLC configurations for load active compensation. By introducing the issues and equipment needs that arise when correcting the lack of power quality in power grids

Offers

CERN Multimedia

Staff Association

2013-01-01

Special offer for members of the Staff Association and their families 10 % reduction on all products in the SEPHORA shop (sells perfume, beauty products etc.) in Val Thoiry ALL YEAR ROUND. Plus 20 % reduction during their “vente privée”* three or four times a year. Simply present your Staff Association membership card when you make your purchase. * Next “vente privée” from 11th to 23rd November 2013 Please contact the Staff Association Secretariat to get the discount voucher.  

Offers

CERN Multimedia

Staff Association

2014-01-01

Special offer for members of the Staff Association and their families 10 % reduction on all products in the SEPHORA shop (sells perfume, beauty products etc.) in Val Thoiry ALL YEAR ROUND. Simply present your Staff Association membership card when you make your purchase. Plus 20 % reduction during their “vente privée”* three or four times a year. * Next “vente privée” from 24th September to 6th November 2014 Please contact the Staff Association Secretariat to get the discount voucher.  

Offers

CERN Multimedia

Staff Association

2012-01-01

Special offer for members of the Staff Association and their families 10 % reduction on all products in the Sephora shop (sells perfume, beauty products etc.) in Val Thoiry all year round. Plus 20 % reduction during their “vente privée”* three or four times a year. Simply present your Staff Association membership card when you make your purchase. * next “vente privée” from 21st November to 1st December 2012 Please contact the Staff Association Secretariat to get the discount voucher.

Offers

CERN Multimedia

Staff Association

2012-01-01

Special offer for members of the Staff Association and their families 10% reduction on all products in the SEPHORA shop (sells perfume, beauty products etc.) in Val Thoiry ALL YEAR ROUND. Plus 20% reduction during their “vente privée”* three or four times a year. Simply present your Staff Association membership card when you make your purchase. * Next “vente privée” from 21st to 26th May 2012 Please contact the Staff Association Secretariat to get the discount voucher  

48 CFR 570.306 - Evaluating offers.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Evaluating offers. 570.306... Real Property 570.306 Evaluating offers. (a) You must evaluate offers solely in accordance with the... solicitation. The file must include the basis for evaluation, an analysis of each offer, and a summary of...

SMART II : the spot market agent research tool version 2.0.

Energy Technology Data Exchange (ETDEWEB)

North, M. J. N.

2000-12-14

Argonne National Laboratory (ANL) has worked closely with Western Area Power Administration (Western) over many years to develop a variety of electric power marketing and transmission system models that are being used for ongoing system planning and operation as well as analytic studies. Western markets and delivers reliable, cost-based electric power from 56 power plants to millions of consumers in 15 states. The Spot Market Agent Research Tool Version 2.0 (SMART II) is an investigative system that partially implements some important components of several existing ANL linear programming models, including some used by Western. SMART II does not implement a complete model of the Western utility system but it does include several salient features of this network for exploratory purposes. SMART II uses a Swarm agent-based framework. SMART II agents model bulk electric power transaction dynamics with recognition for marginal costs as well as transmission and generation constraints. SMART II uses a sparse graph of nodes and links to model the electric power spot market. The nodes represent power generators and consumers with distinct marginal decision curves and varying investment capital as well individual learning parameters. The links represent transmission lines with individual capacities taken from a range of central distribution, outlying distribution and feeder line types. The application of SMART II to electric power systems studies has produced useful results different from those often found using more traditional techniques. Use of the advanced features offered by the Swarm modeling environment simplified the creation of the SMART II model.

Wind Power Utilization Guide.

Science.gov (United States)

1981-09-01

The expres- sions for the rotor torque for a Darrieus machine can be found in Reference 4.16. The Darrieus wind turbine offers the following... turbine generators, wind -driven turbines , power conditioning, wind power, energy conservation, windmills, economic ana \\sis. 20 ABS 1"ACT (Conti,on... turbines , power conditioning requirements, siting requirements, and the economics of wind power under different conditions. Three examples are given to

Pro Tools All-in-One For Dummies

CERN Document Server

Strong, Jeff

2012-01-01

A professional musician guides serious hobbyists through Pro Tool Pro Tools puts professional recording and music production software in the hands of anyone with the appropriate hardware and the knowledge to use it. Musician and recording engineer Jeff Strong guides you through the latest version of this complex program, offering twice the content of the official guide at a lower price. Eight minibooks cover recording basics, getting started with Pro Tools, recording audio, editing audio, managing MIDI, mixing, mastering, and getting your music to the masses.The latest version of Pro Tools off

The Power Trading Agent Competition

NARCIS (Netherlands)

Ketter, W.; Collins, J.; Reddy, P.; Flath, C.; De Weerdt, M.M.

2011-01-01

This is the specification for the Power Trading Agent Competition for 2012 (Power TAC 2012). Power TAC is a competitive simulation that models a “liberalized” retail electrical energy market, where competing business entities or “brokers” offer energy services to customers through tariff contracts,

The Power Trading Agent Competition

NARCIS (Netherlands)

W. Ketter (Wolfgang); J. Collins (John); P. Reddy (Prashant); C. Flath (Christoph); M.M. de Weerdt (Mathijs)

2011-01-01

textabstractThis is the specification for the Power Trading Agent Competition for 2012 (Power TAC 2012). Power TAC is a competitive simulation that models a “liberalized” retail electrical energy market, where competing business entities or “brokers” offer energy services to customers through tariff

Power system relaying

CERN Document Server

Horowitz, Stanley H; Niemira, James K

2013-01-01

The previous three editions of Power System Relaying offer comprehensive and accessible coverage of the theory and fundamentals of relaying and have been widely adopted on university and industry courses worldwide. With the third edition, the authors have added new and detailed descriptions of power system phenomena such as stability, system-wide protection concepts and discussion of historic outages. Power System Relaying, 4th Edition continues its role as an outstanding textbook on power system protection for senior and graduate students in the field of electric power engineering and a refer

48 CFR 25.503 - Group offers.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Group offers. 25.503... PROGRAMS FOREIGN ACQUISITION Evaluating Foreign Offers-Supply Contracts 25.503 Group offers. (a) If the solicitation or an offer specifies that award can be made only on a group of line items or on all line items...

Final Report: Simulation Tools for Parallel Microwave Particle in Cell Modeling

International Nuclear Information System (INIS)

Stoltz, Peter H.

2008-01-01

Transport of high-power rf fields and the subsequent deposition of rf power into plasma is an important component of developing tokamak fusion energy. Two limitations on rf heating are: (i) breakdown of the metallic structures used to deliver rf power to the plasma, and (ii) a detailed understanding of how rf power couples into a plasma. Computer simulation is a main tool for helping solve both of these problems, but one of the premier tools, VORPAL, is traditionally too difficult to use for non-experts. During this Phase II project, we developed the VorpalView user interface tool. This tool allows Department of Energy researchers a fully graphical interface for analyzing VORPAL output to more easily model rf power delivery and deposition in plasmas.

17 CFR 230.802 - Exemption for offerings in connection with an exchange offer or business combination for the...

Science.gov (United States)

2010-04-01

... connection with an exchange offer or business combination for the securities of foreign private issuers. 230... Offers and Business Combinations § 230.802 Exemption for offerings in connection with an exchange offer or business combination for the securities of foreign private issuers. Offers and sales in any...

Hard- and software of real time simulation tools of Electric Power System for adequate modeling power semiconductors in voltage source convertor based HVDC and FACTS

Directory of Open Access Journals (Sweden)

Ufa Ruslan A.

2014-01-01

Full Text Available The motivation of the presented research is based on the needs for development of new methods and tools for adequate simulation of Flexible Alternating Current Transmission System (FACTS devices and High Voltage Direct Current Transmission (HVDC system as part of real electric power systems (EPS. For that, a hybrid approach for advanced simulation of the FACTS and HVDC based on Voltage Source is proposed. The presented simulation results of the developed hybrid model of VSC confirm the achievement of the desired properties of the model and the effectiveness of the proposed solutions.

Attitudes, Perceptions, and Behavioral Intentions of Engineering Workers toward Web 2.0 Tools in the Workplace

Science.gov (United States)

Krause, Jaclyn A.

2010-01-01

As Web 2.0 tools and technologies increase in popularity in consumer markets, enterprises are seeking ways to take advantage of the rich social knowledge exchanges that these tools offer. The problem this study addresses is that it remains unknown whether employees perceive that these tools offer value to the organization and therefore will be…

Proceedings of the APPrO 2006 18. annual Canadian power conference and trade show : Green Power Conference : Canada's leading renewable energy conference

International Nuclear Information System (INIS)

Brooks, J.

2007-01-01

This conference provided a forum for members of the Association of Power Producers of Ontario to discuss recent developments in renewable energy and the electric power industry. An overview of Ontario's renewable standard offer program was provided. Members of the conference also discussed case studies of Ontario renewable energy projects including micro-hydro; anaerobic digesters; stand-alone wind power; and solar energy. The economics of wind power were discussed, and current capital costs for renewable energy technology projects were reviewed. Other topics included the use of base-load nuclear and hydro-electricity; the closing down of coal-fired generation; the integration of wind power; and natural gas and cogeneration. Issues related to interconnected power supplies were also reviewed. Discussions were divided into 5 topics : (1) an introduction to the standard offer program; (2) provincial procurement of green power; (3) case studies of stand-alone project; (4) distributed generation and the standard offer process; and distribution approval and connection issues. refs., tabs., figs

Customer Aggregation: An Opportunity for Green Power?; TOPICAL

International Nuclear Information System (INIS)

Holt, E.; Bird, L.

2001-01-01

We undertook research into the experience of aggregation groups to determine whether customer aggregation offers an opportunity to bring green power choices to more customers. The objectives of this report, therefore, are to (1) identify the different types of aggregation that are occurring today, (2) learn whether aggregation offers an opportunity to advance sales of green power, and (3) share these concepts and approaches with potential aggregators and green power advocates

Design of the tool for periodic not evolvent profiles

Directory of Open Access Journals (Sweden)

Anisimov Roman

2017-01-01

Full Text Available The new approach to profiling of the tool for processing of parts with periodic not evolvent profiles are considered in the article The discriminatory analysis of periodic profiles including repetition of profile both in the plane of perpendicular axis of part, and in the plane of passing along part of axis is offered. In the basis of the offered profiling method the idea of space shaping by rated surface of product of tool surface lies. The big advantage of the offered approach in profiling is its combination with the analysis of parameters of process of engineering work. It allows to predict the accuracy and surface quality of product with not evolvent periodic profile. While using the offered approach the pinion cutter for processing of wheels with internal triangular teeths and mill for processing of the screw of the counter of consumption of liquid, complex profile of which consists of several formings, have been received

High power laser downhole cutting tools and systems

Science.gov (United States)

Zediker, Mark S; Rinzler, Charles C; Faircloth, Brian O; Koblick, Yeshaya; Moxley, Joel F

2015-01-20

Downhole cutting systems, devices and methods for utilizing 10 kW or more laser energy transmitted deep into the earth with the suppression of associated nonlinear phenomena. Systems and devices for the laser cutting operations within a borehole in the earth. These systems and devices can deliver high power laser energy down a deep borehole, while maintaining the high power to perform cutting operations in such boreholes deep within the earth.

Flexible global ocean-atmosphere-land system model. A modeling tool for the climate change research community

Energy Technology Data Exchange (ETDEWEB)

Zhou, Tianjun; Yu, Yongqiang; Liu, Yimin; Wang, Bin (eds.) [Chinese Academy of Sciences, Beijing, (China). Inst. of Atmospheric Physics

2014-04-01

First book available on systematic evaluations of the performance of the global climate model FGOALS. Covers the whole field, ranging from the development to the applications of this climate system model. Provide an outlook for the future development of the FGOALS model system. Offers brief introduction about how to run FGOALS. Coupled climate system models are of central importance for climate studies. A new model known as FGOALS (the Flexible Global Ocean-Atmosphere-Land System model), has been developed by the State Key Laboratory of Numerical Modeling for Atmospheric Sciences and Geophysical Fluid Dynamics, Institute of Atmospheric Physics, Chinese Academy of Sciences (LASG/IAP, CAS), a first-tier national geophysical laboratory. It serves as a powerful tool, both for deepening our understanding of fundamental mechanisms of the climate system and for making decadal prediction and scenario projections of future climate change. ''Flexible Global Ocean-Atmosphere-Land System Model: A Modeling Tool for the Climate Change Research Community'' is the first book to offer systematic evaluations of this model's performance. It is comprehensive in scope, covering both developmental and application-oriented aspects of this climate system model. It also provides an outlook of future development of FGOALS and offers an overview of how to employ the model. It represents a valuable reference work for researchers and professionals working within the related areas of climate variability and change.

Data and Tools | Concentrating Solar Power | NREL

Science.gov (United States)

-energy estimates for grid-connected power projects based on installation and operating costs and system ) is an economic cash flow model designed to assess projects, design cost-based incentives (e.g., feed

Offers

CERN Multimedia

Staff Association

2014-01-01

Passeport Gourmand   Are you dying for a nice meal? The “Passeport Gourmand” offers discounted prices to the members of the Staff Association (available until April 2015 and on sale in the Staff Association Secretariat): Passeport gourmand Ain / Savoie/ Haute Savoie: 56 CHF instead of 79 CHF. Passeport gourmand Geneva / neighbouring France:72 CHF instead of 95 CHF. To the members of the Staff Association: Benefit of reduced tickets: CHF 10 (instead of  18 CHF at the desk) on sale to the secretariat of the Staff Association, Building 510-R010 (in front of the Printshop).

Three-Phase Unbalanced Load Flow Tool for Distribution Networks

DEFF Research Database (Denmark)

Demirok, Erhan; Kjær, Søren Bækhøj; Sera, Dezso

2012-01-01

This work develops a three-phase unbalanced load flow tool tailored for radial distribution networks based on Matlab®. The tool can be used to assess steady-state voltage variations, thermal limits of grid components and power losses in radial MV-LV networks with photovoltaic (PV) generators where...... most of the systems are single phase. New ancillary service such as static reactive power support by PV inverters can be also merged together with the load flow solution tool and thus, the impact of the various reactive power control strategies on the steady-state grid operation can be simply...... investigated. Performance of the load flow solution tool in the sense of resulting bus voltage magnitudes is compared and validated with IEEE 13-bus test feeder....

Fuel switching in power-plants: Modelling and impact on the analysis of energy projects

International Nuclear Information System (INIS)

Varympopiotis, G.; Tolis, A.; Rentizelas, A.

2014-01-01

Highlights: • The impact of fuel-switching in electricity generation is researched. • 15 Scenarios of fuel-technology combinations are compared using a computational model. • Fuel-switching results to higher yields compared to single-fuelled plants. • Plants with natural gas combined cycle and solid fuel supercritical boilers are optimal. • Fuel-switching, offers higher flexibility and security of fuel supply. - Abstract: In electricity markets, where conditions are uncertain, the choice of the best technology and the optimisation of production processes may not anymore be enough to ensure optimal investment yield of energy business plans. Providing some aspects of flexibility might enhance their financial performance; fuel switching may prove to be an alternative option, offering operational flexibility over time, as well as significant financial benefits. Traditional investment analysis methods are considered marginally useful to analyse this case. Instead, the recent tools of time-dependent investment analysis are more appropriate, since they are not inherently restricted to immediate, irreversible decisions. In the present work, a time-dependent computational model is presented and applied in the case study of the Greek Power Sector, in order to estimate the potential advantages of the fuel switching concept. Moreover, the optimal timing of switching is derived, to ensure increasing yields of an average-capacity power-plant. The results of the research indicate significant financial benefits anticipated in most scenarios from applying fuel switching, compared to single-fuelled electricity generation units. Security of fuel supply and enhanced flexibility may also be offered to the power plant since more than one technology and fuels may be engaged

The Increase of Power Efficiency of Underground Coal Mining by the Forecasting of Electric Power Consumption

Science.gov (United States)

Efremenko, Vladimir; Belyaevsky, Roman; Skrebneva, Evgeniya

2017-11-01

In article the analysis of electric power consumption and problems of power saving on coal mines are considered. Nowadays the share of conditionally constant costs of electric power for providing safe working conditions underground on coal mines is big. Therefore, the power efficiency of underground coal mining depends on electric power expense of the main technological processes and size of conditionally constant costs. The important direction of increase of power efficiency of coal mining is forecasting of a power consumption and monitoring of electric power expense. One of the main approaches to reducing of electric power costs is increase in accuracy of the enterprise demand in the wholesale electric power market. It is offered to use artificial neural networks to forecasting of day-ahead power consumption with hourly breakdown. At the same time use of neural and indistinct (hybrid) systems on the principles of fuzzy logic, neural networks and genetic algorithms is more preferable. This model allows to do exact short-term forecasts at a small array of input data. A set of the input parameters characterizing mining-and-geological and technological features of the enterprise is offered.

WP3 Prototype development for operational planning tool

Energy Technology Data Exchange (ETDEWEB)

Kristoffersen, T.; Meibom, P. (Technical Univ. of Denmark. Risoe DTU (Denmark)); Apfelbeck, J.; Barth, R.; Brand, H. (IER, Univ. of Stuttgart (Germany))

2008-04-15

This report documents the model development carried out in work package 3 in the SUPWIND project. It was decided to focus on the estimation of the need for reserve power, and on the reservation of reserve power by TSOs. Reserve power is needed to cover deviations from the day-ahead forecasts of electricity load and wind power production, and to cover forced outages of power plants and transmission lines. Work has been carried out to include load uncertainty and forced outages in the two main components of the Wilmar Planning tool namely the Scenario Tree Tool and the Joint Market Model. This work is documented in chapter 1 and 2. The inclusion of load uncertainty and forced outages in the Scenario Tree Tool enables calculation of the demand for reserve power depending on the forecast horizon. The algorithm is given in Section 3.1. The design of a modified version of the Joint Market Model enabling estimation of the optimal amount of reserve power to reserve day-ahead before the actual operation hour is documented in Section 3.2. With regard to the evaluation of a power system, its ability to cope with extreme events is crucial to be investigated. Chapter 4 gives a definition of such extreme events. Further, the methodology to identify extreme events on the basis of the existing tools is described. Within the SUPWIND consortium there has been an interest in using the Joint Market Model to model smaller parts of a power system but with more detailed representation of the transmission and distribution grid. Chapter 5 documents this work. (author)

Subject to empowerment: the constitution of power in an educational program for health professionals.

Science.gov (United States)

Juritzen, Truls I; Engebretsen, Eivind; Heggen, Kristin

2013-08-01

Empowerment and user participation represents an ideal of power with a strong position in the health sector. In this article we use text analysis to investigate notions of power in a program plan for health workers focusing on empowerment. Issues addressed include: How are relationships of power between users and helpers described in the program plan? Which notions of user participation are embedded in the plan? The analysis is based on Foucault's idea that power which is made subject to attempts of redistribution will re-emerge in other forms. How this happens, and with what consequences, is our analytical concern. The analysis is contrasted with 'snapshots' from everyday life in a nursing home. The program plan communicates empowerment as a democracy-building instrument that the users need. It is a tool for providing expert assistance to the user's self-help. User participation is made into a tool which is external to the user him-/herself. Furthermore, the analysis shows that the plan's image of empowerment presupposes an 'élite user' able to articulate personal needs and desires. This is not very applicable to the most vulnerable user groups, who thereby may end up in an even weaker position. By way of conclusion, we argue that an exchange of undesirable dominating paternalism for a desirable empowerment will not abolish power, but may result in more covert and subtle forms of power that are less open to criticism. The paper offers insights that will facilitate reflections on the premises for practising empowerment-oriented health care.

Design of tool monitor simulator

International Nuclear Information System (INIS)

Yao Yonggang; Deng Changming; Zhang Jia; Meng Dan; Zhang Lu; Wang Zhi'ai; Shen Yang

2011-01-01

It is based on tool monitor in Qinshan Nuclear Power Plant for the object of study, and manufacture a tool monitor simulator. The device is designed to automatically emulate-monitor the contamination level of objects for training students. Once if the tool monitor reports the contamination, the students can handle properly. The brief introduction of main function and system design of the simulator are presented in the paper. (authors)

Seismicity map tools for earthquake studies

Science.gov (United States)

Boucouvalas, Anthony; Kaskebes, Athanasios; Tselikas, Nikos

2014-05-01

We report on the development of new and online set of tools for use within Google Maps, for earthquake research. We demonstrate this server based and online platform (developped with PHP, Javascript, MySQL) with the new tools using a database system with earthquake data. The platform allows us to carry out statistical and deterministic analysis on earthquake data use of Google Maps and plot various seismicity graphs. The tool box has been extended to draw on the map line segments, multiple straight lines horizontally and vertically as well as multiple circles, including geodesic lines. The application is demonstrated using localized seismic data from the geographic region of Greece as well as other global earthquake data. The application also offers regional segmentation (NxN) which allows the studying earthquake clustering, and earthquake cluster shift within the segments in space. The platform offers many filters such for plotting selected magnitude ranges or time periods. The plotting facility allows statistically based plots such as cumulative earthquake magnitude plots and earthquake magnitude histograms, calculation of 'b' etc. What is novel for the platform is the additional deterministic tools. Using the newly developed horizontal and vertical line and circle tools we have studied the spatial distribution trends of many earthquakes and we here show for the first time the link between Fibonacci Numbers and spatiotemporal location of some earthquakes. The new tools are valuable for examining visualizing trends in earthquake research as it allows calculation of statistics as well as deterministic precursors. We plan to show many new results based on our newly developed platform.

Application of MCDM based hybrid optimization tool during turning of ASTM A588

Directory of Open Access Journals (Sweden)

Himadri Majumder

2017-07-01

Full Text Available Multi-criteria decision making approach is one of the most troublesome tools for solving the tangled optimization problems in the machining area due to its capability of solving the complex optimization problems in the production process. Turning is widely used in the manufacturing processes as it offers enormous advantages like good quality product, customer satisfaction, economical and relatively easy to apply. A contemporary approach, MOORA coupled with PCA, was used to ascertain an optimal combination of input parameters (spindle speed, depth of cut and feed rate for the given output parameters (power consumption, average surface roughness and frequency of tool vibration using L27 orthogonal array for turning on ASTM A588 mild steel. Comparison between MOORA-PCA and TOPSIS-PCA shows the effectiveness of MOORA over TOPSIS method. The optimum parameter combination for multi-performance characteristics has been established for ASTM A588 mild steel are spindle speed 160 rpm, depth of cut 0.1 mm and feed rate 0.08 mm/rev. Therefore, this study focuses on the application of the hybrid MCDM approach as a vital selection making tool to deal with multi objective optimization problems.

48 CFR 225.7703-3 - Evaluating offers.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Evaluating offers. 225... Iraq or Afghanistan 225.7703-3 Evaluating offers. (a) Evaluate offers submitted in response to... Afghanistan, as follows: (1) If the low offer is an offer of a product or service from Iraq or Afghanistan...

Development of configuration risk management tool

International Nuclear Information System (INIS)

Masuda, Takahiro; Doi, Eiji

2003-01-01

Tokyo Electric Power Company (referred to as TEPCO hereinafter), and other Japanese utilities as well, have been trying to improve the capacity factor of their Nuclear Power Plants (NPPs) through modernization of Operation and Maintenance strategy. TEPCO intends to apply risk information to O and M field with maintaining or even improving both safety and production efficiency. Under these situations, TEPCO with some BWR utilities started to develop a Configuration Risk Management (CRM) tool that can estimate risk in various plant conditions due to configuration changes during outage. Moreover, we also intend to apply CRM to on-line maintenance (OLM) in the near future. This tool can calculate the Core Damage Frequency (CDF) according to given plant condition, such as SSCs availability, decay heat level and the inventory of coolant in both outage state and full-power operation. From deterministic viewpoint, whether certain configuration meet the related requirements of Technical Specifications. User-friendly interface is one of the important features of this tool because this enables the site engineers with little experience in PSA to quantify and utilize the risk information by this tool. (author)

Design Tools for Reconfigurable Hardware in Orbit (RHinO)

Science.gov (United States)

French, Mathew; Graham, Paul; Wirthlin, Michael; Larchev, Gregory; Bellows, Peter; Schott, Brian

2004-01-01

The Reconfigurable Hardware in Orbit (RHinO) project is focused on creating a set of design tools that facilitate and automate design techniques for reconfigurable computing in space, using SRAM-based field-programmable-gate-array (FPGA) technology. These tools leverage an established FPGA design environment and focus primarily on space effects mitigation and power optimization. The project is creating software to automatically test and evaluate the single-event-upsets (SEUs) sensitivities of an FPGA design and insert mitigation techniques. Extensions into the tool suite will also allow evolvable algorithm techniques to reconfigure around single-event-latchup (SEL) events. In the power domain, tools are being created for dynamic power visualiization and optimization. Thus, this technology seeks to enable the use of Reconfigurable Hardware in Orbit, via an integrated design tool-suite aiming to reduce risk, cost, and design time of multimission reconfigurable space processors using SRAM-based FPGAs.

Mobile devices tools and technologies

CERN Document Server

Collins, Lauren

2015-01-01

Mobile Devices: Tools and Technologies provides readers with an understanding of the mobile landscape available to app developers, system and network engineers, and the avid techie. As the trend of mobile technology has enabled the continuous development of ubiquitous applications, this book offers insights into tools and technologies critical to evaluating and implementing mobile strategies.The book is organized into four parts of 18 contributed chapters written by engineers in the areas of application and database development, mobile enterprise strategy, and networking and security. Througho

Vortex filament method as a tool for computational visualization of quantum turbulence

Science.gov (United States)

Hänninen, Risto; Baggaley, Andrew W.

2014-01-01

The vortex filament model has become a standard and powerful tool to visualize the motion of quantized vortices in helium superfluids. In this article, we present an overview of the method and highlight its impact in aiding our understanding of quantum turbulence, particularly superfluid helium. We present an analysis of the structure and arrangement of quantized vortices. Our results are in agreement with previous studies showing that under certain conditions, vortices form coherent bundles, which allows for classical vortex stretching, giving quantum turbulence a classical nature. We also offer an explanation for the differences between the observed properties of counterflow and pure superflow turbulence in a pipe. Finally, we suggest a mechanism for the generation of coherent structures in the presence of normal fluid shear. PMID:24704873

Smart grids and power systems efficiency: regulatory tools and demand-side management impacts

International Nuclear Information System (INIS)

Bergaentzle, Claire

2015-01-01

The physical architecture of electricity grids and the organizational structure of power systems implemented after the reforms have traditionally be achieved according to the characteristics of the transmission infrastructures and power mixes. However, the new challenges related to energy transition favor a greater participation of decentralized generation and final consumers to system exploitation and competitive markets. This latter participation is made possible thanks to recent innovations in the fields of communication and remote control technologies. Significant evolutions are expected in power industries that share common characteristics. First, these evolutions suppose massive capital investments to modernize and adapt current power distribution grids. Second, it is expected the activation of distribution grids and final consumers will unleash substantial unexploited economic efficiency gains as well as impose new constraints. Taking these simple facts as a starting point, the objective of the thesis is twofold. In the first place, we provide a theoretical analysis of the regulatory instruments that monitor the system operators' expenses. Relying on the literature, we aim at characterizing what regulatory tools and incitation are suitable for investing in smart grids technologies. Since it is necessary to compare theoretical formulation to facts, we use an empirical approach that allows us to designate key benefits pursued by the development of smart grids and to compare our theoretical results with practical regulatory applications. Our findings eventually allow us to formulate recommendations. In the second place, the thesis focuses on the impacts of demand-side management during peak periods. We structure our approach around two general observations. Large benefits should be generated in lowering substantially peak demand. However, such situation also creates losses of profit for generators. We provide an estimation of efficiency gains and revenue losses

Web analytics tools and web metrics tools: An overview and comparative analysis

Directory of Open Access Journals (Sweden)

Ivan Bekavac

2015-10-01

Full Text Available The aim of the paper is to compare and analyze the impact of web analytics tools for measuring the performance of a business model. Accordingly, an overview of web analytics and web metrics tools is given, including their characteristics, main functionalities and available types. The data acquisition approaches and proper choice of web tools for particular business models are also reviewed. The research is divided in two sections. First, a qualitative focus is placed on reviewing web analytics tools to exploring their functionalities and ability to be integrated into the respective business model. Web analytics tools support the business analyst’s efforts in obtaining useful and relevant insights into market dynamics. Thus, generally speaking, selecting a web analytics and web metrics tool should be based on an investigative approach, not a random decision. The second section is a quantitative focus shifting from theory to an empirical approach, and which subsequently presents output data resulting from a study based on perceived user satisfaction of web analytics tools. The empirical study was carried out on employees from 200 Croatian firms from either an either IT or marketing branch. The paper contributes to highlighting the support for management that available web analytics and web metrics tools available on the market have to offer, and based on the growing needs of understanding and predicting global market trends.

Offers

CERN Multimedia

Staff Association

2013-01-01

The « Théâtre de Carouge » offers a 5.- CHF discount for all shows (30.- CHF instead of 35.- CHF) and for the season tickets "Premières représentations" (132.- CHF instead of 162.- CHF) and "Classique" (150.- CHF instead of 180.- CHF). Please send your reservation by email to smills@tcag.ch via your professional email address. Please indicate the date of your reservation, your name and firstname and your telephone number A confirmation will be sent by email. Your membership card will be asked when you collect the tickets. More information on www.tcag.ch and www.tcag.ch/blog/

ADRIA: A summary of different tools for motor and generator field service activities in the international market

International Nuclear Information System (INIS)

Krell, M.; Wuehler, H.

2012-01-01

AREVA Drive In Application (ADRIA) – is an innovative program for use at sites all over the world. ADRIA is a full package for medium voltage motor and generator services growth in the long-term, which presents a wide range of applications for nuclear- , thermal- , renewable hydro power plants and all industrial plants. ADRIA support our customers with an optimized product in MV motor management systems e.g., dismantling, maintenance, repair, tools, containers with full equipped working tools or measure equipment. Are you planning to open a site? You will need special equipment and very special diagnostic methods for electrical analysis for preventive maintenance scheduling and planning; special support from experts, ADRIA is a good, unitized, and flexible solution which can be adapted to different customer requirements. • Technical modules show low service and maintenance costs due to the life time of electrical machines. • Measurement module – a solution for the actual condition of the MV motors and generators (vibration, partial discharge, infrared technology, cable analysis, motor – current – analysis) • Documentation module – for all projects in joining with quality management • Tools module – support for all activities in service (working tools, office / store containers) • Man power module – for all service in the field (Experts with world wide experience) • For pre-maintenance we use, for example, infrared technology. Experts monitor different cycles and find out which parts are creating problems. The maintenance strategy will be clear, shorter and more effective for the next outage. ADRIA offers great advantages for the global maintenance market providing time, efficiency and preventive scheduling, efforts and saving of costs. This new technology method has been successfully applied in various motor refurbishment projects in German, Spain or Brazil nuclear power plants since 2010. Further follow-up orders in German and

The power of PowerPoint.

Science.gov (United States)

Niamtu , J

2001-08-01

Carousel slide presentations have been used for academic and clinical presentations since the late 1950s. However, advances in computer technology have caused a paradigm shift, and digital presentations are quickly becoming standard for clinical presentations. The advantages of digital presentations include cost savings; portability; easy updating capability; Internet access; multimedia functions, such as animation, pictures, video, and sound; and customization to augment audience interest and attention. Microsoft PowerPoint has emerged as the most popular digital presentation software and is currently used by many practitioners with and without significant computer expertise. The user-friendly platform of PowerPoint enables even the novice presenter to incorporate digital presentations into his or her profession. PowerPoint offers many advanced options that, with a minimal investment of time, can be used to create more interactive and professional presentations for lectures, patient education, and marketing. Examples of advanced PowerPoint applications are presented in a stepwise manner to unveil the full power of PowerPoint. By incorporating these techniques, medical practitioners can easily personalize, customize, and enhance their PowerPoint presentations. Complications, pitfalls, and caveats are discussed to detour and prevent misadventures in digital presentations. Relevant Web sites are listed to further update, customize, and communicate PowerPoint techniques.

A new fully automatic PIM tool to replicate two component tungsten DEMO divertor parts

International Nuclear Information System (INIS)

Antusch, Steffen; Commin, Lorelei; Heneka, Jochen; Piotter, Volker; Plewa, Klaus; Walter, Heinz

2013-01-01

Highlights: • Development of a fully automatic 2C-PIM tool. • Replicate fusion relevant components in one step without additional brazing. • No cracks or gaps in the seam of the joining zone visible. • For both material combinations a solid bond of the material interface was achieved. • PIM is a powerful process for mass production as well as for joining even complex shaped parts. -- Abstract: At Karlsruhe Institute of Technology (KIT), divertor design concepts for future nuclear fusion power plants beyond ITER are intensively investigated. One promising KIT divertor design concept for the future DEMO power reactor is based on modular He-cooled finger units. The manufacturing of such parts by mechanical machining such as milling and turning, however, is extremely cost and time intensive because tungsten is very hard and brittle. Powder Injection Molding (PIM) has been adapted to tungsten processing at KIT since a couple of years. This production method is deemed promising in view of large-scale production of tungsten parts with high near-net-shape precision, hence, offering an advantage of cost-saving process compared to conventional machining. The properties of the effectively and successfully manufactured divertor part tile consisting only of pure tungsten are a microstructure without cracks and a high density (>98% T.D.). Based on the achieved results a new fully automatic multicomponent PIM tool was developed and allows the replication and joining without brazing of fusion relevant components of different materials in one step and the creation of composite materials. This contribution describes the process route to design and engineer a new fully automatic 2C-PIM tool, including the filling simulation and the implementing of the tool. The complete technological fabrication process of tungsten 2C-PIM, including material and feedstock (powder and binder) development, injection molding, and heat-treatment of real DEMO divertor parts is outlined

The 2018 Power Trading Agent Competition

NARCIS (Netherlands)

W. Ketter (Wolfgang); J. Collins (John); M.M. de Weerdt (Mathijs)

2017-01-01

markdownabstractThis is the specification for the Power Trading Agent Competition for 2018 (Power TAC 2018). Power TAC is a competitive simulation that models a “liberalized” retail electrical energy market, where competing business entities or “brokers” offer energy services to customers through

The 2013 Power Trading Agent Competition

NARCIS (Netherlands)

W. Ketter (Wolfgang); J. Collins (John); P. Reddy (Prashant); M.M. de Weerdt (Mathijs)

2013-01-01

textabstractThis is the specification for the Power Trading Agent Competition for 2013 (Power TAC 2013). Power TAC is a competitive simulation that models a “liberalized” retail electrical energy market, where competing business entities or “brokers” offer energy services to customers through tariff

The 2016 Power Trading Agent Competition

NARCIS (Netherlands)

W. Ketter (Wolfgang); J. Collins (John); M.M. de Weerdt (Mathijs)

2016-01-01

markdownabstractThis is the specification for the Power Trading Agent Competition for 2016 (Power TAC 2016). Power TAC is a competitive simulation that models a “liberalized” retail electrical energy market, where competing business entities or “brokers” offer energy services to customers through

The 2017 Power Trading Agent Competition

NARCIS (Netherlands)

W. Ketter (Wolfgang); J. Collins (John); M.M. de Weerdt (Mathijs)

2017-01-01

markdownabstractThis is the specification for the Power Trading Agent Competition for 2017 (Power TAC 2017). Power TAC is a competitive simulation that models a “liberalized” retail electrical energy market, where competing business entities or “brokers” offer energy services to customers through

The 2012 Power Trading Agent Competition

NARCIS (Netherlands)

W. Ketter (Wolfgang); J. Collins (John); P. Reddy (Prashant); M.M. de Weerdt (Mathijs)

2012-01-01

textabstractThis is the specification for the Power Trading Agent Competition for 2012 (Power TAC 2012). Power TAC is a competitive simulation that models a “liberalized” retail electrical energy market, where competing business entities or “brokers” offer energy services to customers through tariff

The 2015 Power Trading Agent Competition

NARCIS (Netherlands)

W. Ketter (Wolfgang); J. Collins (John); P. Reddy (Prashant); M.M. de Weerdt (Mathijs)

2015-01-01

markdownabstractThis is the specification for the Power Trading Agent Competition for 2015 (Power TAC 2015). Power TAC is a competitive simulation that models a “liberalized” retail electrical energy market, where competing business entities or “brokers” offer energy services to customers through

The 2014 Power Trading Agent Competition

NARCIS (Netherlands)

W. Ketter (Wolfgang); J. Collins (John); P. Reddy (Prashant); M.M. de Weerdt (Mathijs)

2014-01-01

textabstractThis is the specification for the Power Trading Agent Competition for 2014 (Power TAC 2014). Power TAC is a competitive simulation that models a “liberalized” retail electrical energy market, where competing business entities or “brokers” offer energy services to customers through tariff

Power law analysis of the human microbiome.

Science.gov (United States)

Ma, Zhanshan Sam

2015-11-01

Taylor's (1961, Nature, 189:732) power law, a power function (V = am(b) ) describing the scaling relationship between the mean and variance of population abundances of organisms, has been found to govern the population abundance distributions of single species in both space and time in macroecology. It is regarded as one of few generalities in ecology, and its parameter b has been widely applied to characterize spatial aggregation (i.e. heterogeneity) and temporal stability of single-species populations. Here, we test its applicability to bacterial populations in the human microbiome using extensive data sets generated by the US-NIH Human Microbiome Project (HMP). We further propose extending Taylor's power law from the population to the community level, and accordingly introduce four types of power-law extensions (PLEs): type I PLE for community spatial aggregation (heterogeneity), type II PLE for community temporal aggregation (stability), type III PLE for mixed-species population spatial aggregation (heterogeneity) and type IV PLE for mixed-species population temporal aggregation (stability). Our results show that fittings to the four PLEs with HMP data were statistically extremely significant and their parameters are ecologically sound, hence confirming the validity of the power law at both the population and community levels. These findings not only provide a powerful tool to characterize the aggregations of population and community in both time and space, offering important insights into community heterogeneity in space and/or stability in time, but also underscore the three general properties of power laws (scale invariance, no average and universality) and their specific manifestations in our four PLEs. © 2015 John Wiley & Sons Ltd.

7 CFR 3560.656 - Incentives offers.

Science.gov (United States)

2010-01-01

... 7 Agriculture 15 2010-01-01 2010-01-01 false Incentives offers. 3560.656 Section 3560.656... AGRICULTURE DIRECT MULTI-FAMILY HOUSING LOANS AND GRANTS Housing Preservation § 3560.656 Incentives offers. (a) The Agency will offer a borrower, who submits a prepayment request meeting the conditions of § 3560...

Development of new generation software tools for simulation of electron beam formation in novel high power gyrotrons

Science.gov (United States)

Sabchevski, S.; Zhelyazkov, I.; Benova, E.; Atanassov, V.; Dankov, P.; Thumm, M.; Dammertz, G.; Piosczyk, B.; Illy, S.; Tran, M. Q.; Alberti, S.; Hogge, J.-Ph

2006-07-01

Computer aided design (CAD) based on numerical experiments performed by using adequate physical models and efficient simulation codes is an indispensable tool for development, investigation, and optimization of gyrotrons used as radiation sources for electron cyclotron resonance heating (ECRH) of fusion plasmas. In this paper, we review briefly the state-of-the-art in the field of modelling and simulation of intense, relativistic, helical electron beams formed in the electron-optical systems (EOS) of powerful gyrotrons. We discuss both the limitations of the known computer codes and the requirements for increasing their capabilities for solution of various design problems that are being envisaged in the development of the next generation gyrotrons for ECRH. Moreover, we present the concept followed by us in an attempt to unite the advantages of the modern programming techniques with self-consistent, first-principles 3D physical models in the creation of a new highly efficient and versatile software package for simulation of powerful gyrotrons.

Offering Incentives from the Outside

DEFF Research Database (Denmark)

Emmanuel, Nikolas G.

2017-01-01

Incentives offer a good deal of underexplored opportunities to help manage conflict by encouraging political bargaining. This study has two primary objectives. First, it furthers the discussion of how external third parties can help manage conflicts. Second, it offers a typology of the available ...

48 CFR 570.203-3 - Soliciting offers.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Soliciting offers. 570.203... 570.203-3 Soliciting offers. (a) Solicit offers by providing each prospective offeror a proposed short..., evaluation procedures and submissions of offers. ...

43 CFR 12.715 - Evaluating offers.

Science.gov (United States)

2010-10-01

... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false Evaluating offers. 12.715 Section 12.715... Act-Supplies § 12.715 Evaluating offers. (a) Unless the head of the grantee organization or a designee at a level no lower than the grantee's designated awarding official determines otherwise, the offered...

32 CFR 536.64 - Final offers.

Science.gov (United States)

2010-07-01

... 32 National Defense 3 2010-07-01 2010-07-01 true Final offers. 536.64 Section 536.64 National... UNITED STATES Investigation and Processing of Claims § 536.64 Final offers. (a) When claims personnel... less than the amount claimed, a settlement authority will make a written final offer within his or her...

Materials modelling - a possible design tool for advanced nuclear applications

International Nuclear Information System (INIS)

Hoffelner, W.; Samaras, M.; Bako, B.; Iglesias, R.

2008-01-01

The design of components for power plants is usually based on codes, standards and design rules or code cases. However, it is very difficult to get the necessary experimental data to prove these lifetime assessment procedures for long-term applications in environments where complex damage interactions (temperature, stress, environment, irradiation) can occur. The rules used are often very simple and do not have a basis which take physical damage into consideration. The linear life fraction rule for creep and fatigue interaction can be taken as a prominent example. Materials modelling based on a multi-scale approach in principle provides a tool to convert microstructural findings into mechanical response and therefore has the capability of providing a set of tools for the improvement of design life assessments. The strength of current multi-scale modelling efforts is the insight they offer as regards experimental phenomena. To obtain an understanding of these phenomena it is import to focus on issues which are important at the various time and length scales of the modelling code. In this presentation the multi-scale path will be demonstrated with a few recent examples which focus on VHTR applications. (authors)

Modelling the Economics of a New Nuclear Power Plant in Switzerland

International Nuclear Information System (INIS)

Winkler, Thomas; Streit, Marco

2008-01-01

Financing a new nuclear power plant is challenging right from the beginning and the problem of very high capital costs during the construction phase is not the only one. Long planning periods with high risk capital as well as many political influences during a long decision and planning process are the factors that are complicating the economic modelling. Nevertheless, the Net Present Value (NPV) and the Internal Rate of Return (IRR) which are calculated by discounting forecasted future cash flows are important numbers for decision makers. But these numbers strongly depend on the scenarios and input data used during the calculations. This study offers an overview of present Swiss electricity situation and the economics of the existing Swiss Nuclear Power Plants. Furthermore, a modelling tool will be introduced which allows comparing different scenarios for the whole life cycle of a nuclear power plant (planning, licensing, construction, commercial operation, decommissioning). In the third part, this study will show on a calculation example both the range of results and the different influences of escalation rates or higher costs by means of a calculation example. (authors)

Modelling the Economics of a New Nuclear Power Plant in Switzerland

Energy Technology Data Exchange (ETDEWEB)

Winkler, Thomas [University of Applied Sciences Ansbach, Residenzstrasse 8, 91522 Ansbach (Germany); Aare-Tessin Ltd for Electricity, Bahnhofquai 12, 4601 Olten (Switzerland); Streit, Marco [Aare-Tessin Ltd for Electricity, Bahnhofquai 12, 4601 Olten (Switzerland)

2008-07-01

Financing a new nuclear power plant is challenging right from the beginning and the problem of very high capital costs during the construction phase is not the only one. Long planning periods with high risk capital as well as many political influences during a long decision and planning process are the factors that are complicating the economic modelling. Nevertheless, the Net Present Value (NPV) and the Internal Rate of Return (IRR) which are calculated by discounting forecasted future cash flows are important numbers for decision makers. But these numbers strongly depend on the scenarios and input data used during the calculations. This study offers an overview of present Swiss electricity situation and the economics of the existing Swiss Nuclear Power Plants. Furthermore, a modelling tool will be introduced which allows comparing different scenarios for the whole life cycle of a nuclear power plant (planning, licensing, construction, commercial operation, decommissioning). In the third part, this study will show on a calculation example both the range of results and the different influences of escalation rates or higher costs by means of a calculation example. (authors)

An intelligent tool for the training of nuclear plant operators

International Nuclear Information System (INIS)

Cordier, B.

1990-01-01

A new type of pedagogical tool has been developped for the training of nuclear power plant operation. This tool combines simulation and expert system. The first process developped is about Steam Generator Tube Rupture (S.G.T.R.). All nuclear power plants will be equiped with this system in 1989 and 1990. After this first experiment, others processes will be developped for this tool

5 CFR 536.104 - Reasonable offer.

Science.gov (United States)

2010-01-01

... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Reasonable offer. 536.104 Section 536.104... Provisions § 536.104 Reasonable offer. (a) For the purpose of determining whether grade retention eligibility or entitlement must be terminated under § 536.207 or 536.208, the offer of a position is a reasonable...

Choosing ICT Tools: Proposition of a Model to Deliver Value for Clients

Directory of Open Access Journals (Sweden)

Paulo Grise

2013-04-01

Full Text Available Several tools of Information and Communication Technology (ICT are being used nowadays to support customer relationship processes. Literature review shows that, in the selection and deployment of these tools, internal goals of productivity and efficiency predominate. In just a few situations, the objective is offering higher value to the client. Therefore, the objective of this research was to propose a process of selection and deployment of ICT tools geared towards offering higher value, in the business to business market. Primary data were collected in depth interviews with high-level executives responsible for ICT areas. For the content analysis, the ATLAS-ti software was used, searching for recurrent themes. A value oriented process for choosing and implementing ICT tools was then proposed.

Driving with electrical power

International Nuclear Information System (INIS)

Ursin, M.; Hoeckel, M.

2008-01-01

This article takes a look at the chances offered to the electricity supply industry by the increasing use of battery-driven vehicles - and the advantages thus offered to the environment. The use of the vehicles' batteries to form a distributed electricity storage scheme is discussed. The authors comment that, although electrically-driven vehicles consume more power, the total primary energy consumption and pollutant emissions will be reduced. The actual electricity consumption of electric vehicles and the source of this power are examined. Power saved by the reduced use of electrical heating systems and boilers could, according to the authors, be used to charge the batteries of electric vehicles. The use of these batteries as a storage system to help regulate electricity supplies is discussed and the steps to be taken for the implementation of such a system are listed

Drishti: a volume exploration and presentation tool

Science.gov (United States)

Limaye, Ajay

2012-10-01

Among several rendering techniques for volumetric data, direct volume rendering is a powerful visualization tool for a wide variety of applications. This paper describes the major features of hardware based volume exploration and presentation tool - Drishti. The word, Drishti, stands for vision or insight in Sanskrit, an ancient Indian language. Drishti is a cross-platform open-source volume rendering system that delivers high quality, state of the art renderings. The features in Drishti include, though not limited to, production quality rendering, volume sculpting, multi-resolution zooming, transfer function blending, profile generation, measurement tools, mesh generation, stereo/anaglyph/crosseye renderings. Ultimately, Drishti provides an intuitive and powerful interface for choreographing animations.

PRACTICAL APPLICATION OF QUALITY TOOLS

Directory of Open Access Journals (Sweden)

Duško Pavletić

2008-09-01

Full Text Available The paper is dealing with one segment of broader research of universality an systematicness in application of seven basic quality tools (7QC tools, which is possible to use in different areas: power plant, process industry, government, health and tourism services. The aim of the paper was to show on practical examples that there is real possibility of application of 7QC tools. Furthermore, the research has to show to what extent are selected tools in usage and what reasons of avoiding their broader application are. The simple example of successful application of the quality tools are shown on selected company in process industry.

Human Power Empirically Explored

Energy Technology Data Exchange (ETDEWEB)

Jansen, A.J.

2011-01-18

Harvesting energy from the users' muscular power to convert this into electricity is a relatively unknown way to power consumer products. It nevertheless offers surprising opportunities for product designers; human-powered products function independently from regular power infrastructure, are convenient and can be environmentally and economically beneficial. This work provides insight into the knowledge required to design human-powered energy systems in consumer products from a scientific perspective. It shows the developments of human-powered products from the first introduction of the BayGen Freeplay radio in 1995 till current products and provides an overview and analysis of 211 human-powered products currently on the market. Although human power is generally perceived as beneficial for the environment, this thesis shows that achieving environmental benefit is only feasible when the environmental impact of additional materials in the energy conversion system is well balanced with the energy demands of the products functionality. User testing with existing products showed a preference for speeds in the range of 70 to 190 rpm for crank lengths from 32 to 95 mm. The muscular input power varied from 5 to 21 W. The analysis of twenty graduation projects from the Faculty of Industrial Design Engineering in the field of human-powered products, offers an interesting set of additional practice based design recommendations. The knowledge based approach of human power is very powerful to support the design of human-powered products. There is substantial potential for improvements in the domains energy conversion, ergonomics and environment. This makes that human power, when applied properly, is environmentally and economically competitive over a wider range of applications than thought previously.

Screening Tools for Kindergarten Children

Directory of Open Access Journals (Sweden)

Georgia Kokkalia

2017-12-01

Full Text Available The current paper review gives a brief and representative description of some of the most used screening tools for kindergarten education. The significant role that early education plays in every child’s academic life is underlined by the importance of tools that give his learning profiles.  Therefore many researchers note that screening tools paly a notable role for the kindergarten teachers, the family and of course for the child in order to offer the appropriate intervention program, the proper support and draw the most suitable teaching method for the child and the class. Thus, the research team of this paper gives the description of some screening tools that are used by kindergarten teachers and specialist’s worldwide-with focus in Greek kindergarten- scoping to underlie strengths and weaknesses of preschoolers. Finally, it is thought worthwhile to say that the screening tools that are presented are used with the traditional way while some of them with the support of new technology.

Cubesat SEP Power Module, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — Today's CubeSats are inherently power limited due to their small size and available surface area. Today's CubeSats offer <100W of available power. This limits...

46 CFR 201.144 - Offer of proof.

Science.gov (United States)

2010-10-01

... 46 Shipping 8 2010-10-01 2010-10-01 false Offer of proof. 201.144 Section 201.144 Shipping... PROCEDURE Evidence (Rule 14) § 201.144 Offer of proof. An offer of proof made in connection with an... accompany the record as the offer of proof. ...

Business case uncertainty of power plants in future energy systems with wind power

International Nuclear Information System (INIS)

Brouwer, Anne Sjoerd; Broek, Machteld van den; Özdemir, Özge; Koutstaal, Paul; Faaij, André

2016-01-01

The European power sector is transforming due to climate policies and an increased deployment of intermittent RES. The sector will require thermal power plants for the decades to come, but their business cases are (negatively) affected by this transformation. This study presents a novel tool to quantify the effect of policy, price and project-related uncertainties on power plant business cases. This tool can support policymakers in stimulating necessary investments in new thermal generation capacity. We find that these investments are currently unsound (power plants recoup on average –12% to 59% of their initial investment). Future climate policy, i.e. the CO_2 price, has a very strong impact on business cases (affects the profitability by 5–40%-points). The impact of the deployment of wind power is average (2–8%-point difference between 10% and 21% wind penetration). Variations in annual wind power production barely affect the profitability (variation of ±1%-point). To stimulate new investments, policymakers should first decrease the uncertainty in business cases caused by policy. Durable climate policy is especially important. Also, policies to increase the profits of thermal power plants should be carefully considered and implemented. This combined approach will reduce the revenue gap that needs to be bridged by supportive policies. - Highlights: • The operation of thermal power plants is affected by CO_2 prices and wind power. • A new tool quantifies the effect of their uncertainty on power plant profitability. • New power plants are unprofitable and show a large spread in expected profits. • Uncertain future climate policy is a key factor in all business cases (±56% change). • Increasing wind power penetration (10–21%) decreases profitability by 14%.

Power, right, and truth: Foucault's triangle as a model for clinical power.

Science.gov (United States)

Polifroni, E Carol

2010-01-01

Power has historically been viewed from a position of dominance and authority. Using this lens leads one to a destiny wherein one individual or society has power over another. The power over approach is a hierarchical view, one that leads to someone else being oppressed, and one wherein the prevailing hegemony continues. If a different lens is used, wherein power does not reside within a position, but rather, within a person and within a relationship bounded by knowledge, a new destiny of power to and power of is created. These two approaches to power are examined and clinical power is offered as a lens that culminates in the understanding of power as a right and as truth imbedded with awareness and relationships.

Platelet-rich Preparation may serve as a Powerful Tool for Therapeutic Dental Pulp Regeneration

Directory of Open Access Journals (Sweden)

Hai-Hua Sun

2011-09-01

Full Text Available Introduction: Regeneration of dental pulp tissues presents one of the most challenging issues in regenerative dentistry due to their extremely poor intrinsic ability for self-healing and re-growth.The hypothesis: We hypothes-ize that patient-derived platelet-rich preparation can be used in clinical endodontic regenerative procedure, serving as a powerful tool for therapeutic dental pulp regeneration.Evaluation of the hypothesis: The cell transplantation does not always obtain the good result because of the low survival rate of transplanted cells. In addition, the use of ex vivo manipulated cell products faces many translational hurdles in treating non-vital disease. Recently, the body cells are focused as a potential source for therapeutics. Some researchers have demonstrated that endogenous stem cells may be recruited to a desired anatomic site pharma-cologically. This is spurring interest in developing new generation of biomaterials that incorporate and release selected powerful extracellular influences in a near-physiological fashion, and subsequently capture endogenous stem cells and influence their fates for regene-ration. The use of patient-derived products such as platelet-rich preparations that contain a multitude of endogenous growth factors and proteins is a clinically translatable biotechnology for this proposes. These simple and cost efficient procedures may have a potential impact in reducing the economic costs for standard medical treatments in regenerative endodontics.

POSSPOW: Possible Power of Offshore Wind Power Plants

DEFF Research Database (Denmark)

Giebel, Gregor; Göçmen, Tuhfe; Sørensen, Poul Ejnar

2013-01-01

Introduction In recent years, the very large offshore wind farms were designed as wind power plants, including possibilities to contribute to the stability of the grid by offering grid services (also called ancillary services). One of those services is reserve power, which is achieved by down......-regulating the wind farm from its maximum possible power. The power can be ramped up quite quickly, but the influence of wakes makes it difficult to assess the exact amount of down-regulation available to sell. Currently, Transmission System Operators (TSOs) have no real way to determine exactly the possible power...... will be verified on some of the large offshore wind farms owned by Vattenfall, and possibly in a DONG Energy wind farm too. Dedicated experiments to the wind flow in large offshore wind farms are planned. Main body of abstract Modern wind turbines have a SCADA signal called possible power. In normal operation...

Offers

CERN Multimedia

Association du personnel

2010-01-01

THEATRE FORUM DE MEYRIN 1, place des Cinq-Continents 1217 Meyrin    Special offer for members of the Staff Association: Reduced ticket prices for the play Love is my sin (in English) from 15 to 17 March at 8.30pm http://www.forum-meyrin.ch/main.php?page=119&s=12   First category: 37 CHF instead of 46 CHF Second category (seats towards the sides): 30 CHF instead of 38 CHF Please present your CERN card and your Staff Association membership card at the ticket office. Ticket reservation: tel. 022 989 34 34 (from Monday to Friday 2pm to 6pm) or e-mail : billetterie@forum-meyrin.ch  

Offer

CERN Document Server

Staff Association

2011-01-01

DETAILS OF THE AGREEMENT WITH BCGE The BCGE Business partner programme devised for members of the CERN Staff Association offers personalized banking solutions with preferential conditions. The advantages are linked to salary accounts (free account keeping, internet banking, free Maestro and credit cards, etc.), mortgage lending, retirement planning, investment, credit, etc. The details of the programme and the preferential conditions are available on the Staff Association web site and from the secretariat (http://cern.ch/association/en/OtherActivities/BCGE.html). To benefit from these advantages, you will need to fill in the form available on our site, which must then be stamped by the Staff Association as proof that you are a paid-up member.  

Usefulness of DC power flow for active power flow analysis with flow controlling devices

NARCIS (Netherlands)

Van Hertem, D.; Verboomen, J.; Purchala, K.; Belmans, R.; Kling, W.L.

2006-01-01

DC power flow is a commonly used tool for contingency analysis. Recently, due to its simplicity and robustness, it also becomes increasingly used for the real-time dispatch and techno-economic analysis of power systems. It is a simplification of a full power flow looking only at active power.

New offer for our members

CERN Document Server

Staff Association

2018-01-01

Evolution 2, your specialist for Outdoor Adventures Be it for a ski lesson, a parachute jump or for a mountain bike descent, come live an unforgettable experience with our outdoor specialists. Benefit from a 10 % discount on all activities: Offer is open to SA members and their family members living in the same household, upon presentation of the membership card. Offer available for all bookings made between 1 June 2018 and 30 May 2019. Offer available on all the Evoltion2 sites. A wide range of summer and winter activities. More information on http://evolution2.com/ Contact and reservation : +33 (0)4.50.02.63.35 management@evolution2.com

9th International Workshop on Parallel Tools for High Performance Computing

CERN Document Server

Hilbrich, Tobias; Niethammer, Christoph; Gracia, José; Nagel, Wolfgang; Resch, Michael

2016-01-01

High Performance Computing (HPC) remains a driver that offers huge potentials and benefits for science and society. However, a profound understanding of the computational matters and specialized software is needed to arrive at effective and efficient simulations. Dedicated software tools are important parts of the HPC software landscape, and support application developers. Even though a tool is by definition not a part of an application, but rather a supplemental piece of software, it can make a fundamental difference during the development of an application. Such tools aid application developers in the context of debugging, performance analysis, and code optimization, and therefore make a major contribution to the development of robust and efficient parallel software. This book introduces a selection of the tools presented and discussed at the 9th International Parallel Tools Workshop held in Dresden, Germany, September 2-3, 2015, which offered an established forum for discussing the latest advances in paral...

Tools and their uses

CERN Document Server

1973-01-01

Teaches names, general uses, and correct operation of all basic hand and power tools, fasteners, and measuring devices you are likely to need. Also, grinding, metal cutting, soldering, and more. 329 illustrations.

Transient analysis of power systems solution techniques, tools and applications

CERN Document Server

Martinez-Velasco, J

2014-01-01

A comprehensive introduction and up-to-date reference to SiC power semiconductor devices covering topics from material properties to applicationsBased on a number of breakthroughs in SiC material science and fabrication technology in the 1980s and 1990s, the first SiC Schottky barrier diodes (SBDs) were released as commercial products in 2001.  The SiC SBD market has grown significantly since that time, and SBDs are now used in a variety of power systems, particularly switch-mode power supplies and motor controls.  SiC power MOSFETs entered commercial production in 2011, providing rugged, hig

33 CFR 5.37 - Offer of facilities.

Science.gov (United States)

2010-07-01

... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Offer of facilities. 5.37 Section... GUARD AUXILIARY § 5.37 Offer of facilities. Any member of the Auxiliary desiring to place a vessel... in such communication which facility is offered. Except in emergencies, an offer to the Coast Guard...

45 CFR 81.85 - Offer of proof.

Science.gov (United States)

2010-10-01

... 45 Public Welfare 1 2010-10-01 2010-10-01 false Offer of proof. 81.85 Section 81.85 Public Welfare... 80 OF THIS TITLE Hearing Procedures § 81.85 Offer of proof. An offer of proof made in connection with... identification and shall accompany the record as the offer of proof. ...

49 CFR 604.43 - Offer of proof.

Science.gov (United States)

2010-10-01

... 49 Transportation 7 2010-10-01 2010-10-01 false Offer of proof. 604.43 Section 604.43..., DEPARTMENT OF TRANSPORTATION CHARTER SERVICE Hearings. § 604.43 Offer of proof. A party whose evidence has... respond to the offer of proof, may offer the evidence on the record when filing an appeal. ...

Special offer

CERN Multimedia

Staff Association

2010-01-01

Special offer for members of the Staff Association and their families 10% reduction on all products in the SEPHORA shop (sells perfume, beauty products etc.) in Val Thoiry ALL YEAR ROUND. Plus 20% reduction during their “vente privée”* three or four times a year. Simply present your Staff Association membership card when you make your purchase. * next “vente privée” from 24th to 29th May 2010  

Soleil a new powerful tool for materials science

International Nuclear Information System (INIS)

Baudelet, F.; Belkhou, R.; Briois, V.; Coati, A.; Dumas, P.; Flank, A.M.; Fontaine, P.; Garreau, Y.; Lyon, O.; Quinkal, I.; Roy, P.; Sauvage, M.; Sirotti, F.; Somogyi, A.; Thiaudiere, D.; Coati, A.; Flank, A.M.; Fontaine, P.; Garreau, Y; Etgens, V.H.; Rochet, F.

2005-01-01

The first photons delivered by the third generation synchrotron source SOLEIL will be soon available for the scientific community. In this context, this paper presents an overview of the potentialities offered by this new machine for the study of materials. The outstanding brilliance of the SOLEIL source will enable to reduce by several orders of magnitude the data collection time for most of the synchrotron techniques (X-ray absorption spectroscopy - EXAFS, wide and small angle X-ray scattering - WAXS and SAXS, X-ray diffraction -XRD, photoelectron spectroscopy and microscopy-XPS and PEEM, etc.) thus allowing an operando approach of catalysis processes. The spatial resolution, from a few micrometers to sub micrometer scale, accessible by micro-diffraction and micro-spectroscopy in the wavelength range from the far IR to the hard X-rays, will provide spatial distributions of different elements (atomic and chemical state selectivity) in a material, from the working heterogeneous catalyst to the reservoir rocks. The reactivity of surfaces and nano-particles exposed to controlled gas fluxes will be studied by several in situ techniques. Finally the combination of different synchrotron techniques (diffraction, absorption and fluorescence X) and the access to complementary information obtained through the simultaneous combination of these techniques with those routinely applied in Materials Science, such as UV-Vis or Raman spectroscopy, will offer enlarged capabilities for the operando characterization of materials. (authors)

Representing tools as hand movements: early and somatotopic visuomotor transformations.

Science.gov (United States)

Bartoli, Eleonora; Maffongelli, Laura; Jacono, Marco; D'Ausilio, Alessandro

2014-08-01

The term affordance defines a property of objects, which relates to the possible interactions that an agent can carry out on that object. In monkeys, canonical neurons encode both the visual and the motor properties of objects with high specificity. However, it is not clear if in humans exists a similarly fine-grained description of these visuomotor transformations. In particular, it has not yet been proven that the processing of visual features related to specific affordances induces both specific and early visuomotor transformations, given that complete specificity has been reported to emerge quite late (300-450ms). In this study, we applied an adaptation-stimulation paradigm to investigate early cortico-spinal facilitation and hand movements׳ synergies evoked by the observation of tools. We adapted, through passive observation of finger movements, neuronal populations coding either for precision or power grip actions. We then presented the picture of one tool affording one of the two grasps types and applied single-pulse Transcranial Magnetic Stimulation (TMS) to the hand primary motor cortex, 150ms after image onset. Cortico-spinal excitability of the Abductor Digiti Minimi and Abductor Pollicis Brevis showed a detailed pattern of modulations, matching tools׳ affordances. Similarly, TMS-induced hand movements showed a pattern of grip-specific whole hand synergies. These results offer a direct proof of the emergence of an early visuomotor transformation when tools are observed, that maintains the same amount of synergistic motor details as the actions we can perform on them. Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.

Economic and Financial Analysis Tools | Energy Analysis | NREL

Science.gov (United States)

Economic and Financial Analysis Tools Economic and Financial Analysis Tools Use these economic and . Job and Economic Development Impact (JEDI) Model Use these easy-to-use, spreadsheet-based tools to analyze the economic impacts of constructing and operating power generation and biofuel plants at the

Design and methodology for calculating the environmental pressure index as a tool for environmental land planning: the case of Cundinamarca

International Nuclear Information System (INIS)

Camacho O, Juana; Burgos S, Javier Dario

2006-01-01

The aim of this work is to provide a practical tool to carry out environmental planning and management processes regarding the use of space, in a complex way including not only biophysical but socioeconomic criteria. In the context of river basin management the Environmental Social Pressure Index was created. This paper presents an Environmental Planning and Management definition, based on the Ecological Supporting Structure, as well as one of sustainability, worked out of several authors. This work offers the methodological sequence to design and calculate a customized Environmental Social Pressure Index according to the specific features of any given territory, using the conceptual framework developed earlier and the multivariate analysis and power laws tools. Finally we present an exercise to illustrate this process, developed for Cundinamarca for 1995

Thermal Power Plant Performance Analysis

CERN Document Server

2012-01-01

The analysis of the reliability and availability of power plants is frequently based on simple indexes that do not take into account the criticality of some failures used for availability analysis. This criticality should be evaluated based on concepts of reliability which consider the effect of a component failure on the performance of the entire plant. System reliability analysis tools provide a root-cause analysis leading to the improvement of the plant maintenance plan.   Taking in view that the power plant performance can be evaluated not only based on  thermodynamic related indexes, such as heat-rate, Thermal Power Plant Performance Analysis focuses on the presentation of reliability-based tools used to define performance of complex systems and introduces the basic concepts of reliability, maintainability and risk analysis aiming at their application as tools for power plant performance improvement, including: ·         selection of critical equipment and components, ·         defini...

Balancing modern Power System with large scale of wind power

DEFF Research Database (Denmark)

Basit, Abdul; Altin, Müfit; Hansen, Anca Daniela

2014-01-01

Power system operators must ensure robust, secure and reliable power system operation even with a large scale integration of wind power. Electricity generated from the intermittent wind in large propor-tion may impact on the control of power system balance and thus deviations in the power system...... frequency in small or islanded power systems or tie line power flows in interconnected power systems. Therefore, the large scale integration of wind power into the power system strongly concerns the secure and stable grid operation. To ensure the stable power system operation, the evolving power system has...... to be analysed with improved analytical tools and techniques. This paper proposes techniques for the active power balance control in future power systems with the large scale wind power integration, where power balancing model provides the hour-ahead dispatch plan with reduced planning horizon and the real time...

Pay-as-bid based reactive power market

International Nuclear Information System (INIS)

Amjady, N.; Rabiee, A.; Shayanfar, H.A.

2010-01-01

In energy market clearing, the offers are stacked in increasing order and the offer that intersects demand curve, determines the market clearing price (MCP). In reactive power market, the location of reactive power compensator is so important. A low cost reactive producer may not essentially be favorable if it is far from the consumer. Likewise, a high cost local reactive compensator at a heavily loaded demand center of network could be inevitably an alternative required to produce reactive power to maintain the integrity of power system. Given the background, this paper presents a day-ahead reactive power market based on pay-as-bid (PAB) mechanism. Generators expected payment function (EPF) is used to construct a bidding framework. Then, total payment function (TPF) of generators is used as the objective function of optimal power flow (OPF) problem to clear the PAB based market. The CIGRE-32 bus test system is used to examine the effectiveness of the proposed reactive power market.

Pay-as-bid based reactive power market

Energy Technology Data Exchange (ETDEWEB)

Amjady, N. [Department of Electrical Engineering, Semnan University, Semnan (Iran, Islamic Republic of); Rabiee, A., E-mail: Rabiee@iust.ac.i [Center of Excellence for Power System Automation and Operation, Department of Electrical Engineering, Iran University of Science and Technology, Tehran (Iran, Islamic Republic of); Shayanfar, H.A. [Center of Excellence for Power System Automation and Operation, Department of Electrical Engineering, Iran University of Science and Technology, Tehran (Iran, Islamic Republic of)

2010-02-15

In energy market clearing, the offers are stacked in increasing order and the offer that intersects demand curve, determines the market clearing price (MCP). In reactive power market, the location of reactive power compensator is so important. A low cost reactive producer may not essentially be favorable if it is far from the consumer. Likewise, a high cost local reactive compensator at a heavily loaded demand center of network could be inevitably an alternative required to produce reactive power to maintain the integrity of power system. Given the background, this paper presents a day-ahead reactive power market based on pay-as-bid (PAB) mechanism. Generators expected payment function (EPF) is used to construct a bidding framework. Then, total payment function (TPF) of generators is used as the objective function of optimal power flow (OPF) problem to clear the PAB based market. The CIGRE-32 bus test system is used to examine the effectiveness of the proposed reactive power market.

Impact of the future water value on wind-reversible hydro offering strategies in electricity markets

International Nuclear Information System (INIS)

Sánchez de la Nieta, A.A.; Contreras, J.; Catalão, J.P.S.

2015-01-01

Highlights: • A stochastic mixed integer linear model is proposed to maximize the profit and the future water value. • Conditional Value at Risk (CVaR) is used for risk-hedging. • The offer strategies analyzed are single and separate, with and without a physical connection. • The effect of considering the future water value of the reservoirs is studied for several time horizons. - Abstract: A coordinated offering strategy between a wind farm and a reversible hydro plant can reduce wind power imbalances, improving the system efficiency whilst decreasing the total imbalances. A stochastic mixed integer linear model is proposed to maximize the profit and the future water value FWV of the system using Conditional Value at Risk (CVaR) for risk-hedging. The offer strategies analyzed are: (i) single wind-reversible hydro offer with a physical connection between wind and hydro units to store spare wind energy, and (ii) separate wind and reversible hydro offers without a physical connection between them. The effect of considering the FWV of the reservoirs is studied for several time horizons: one week (168 h) and one month (720 h) using an illustrative case study. Conclusions are duly drawn from the case study to show the impact of FWV in the results.

A Robust Optimisation Approach using CVaR for Unit Commitment in a Market with Probabilistic Offers

DEFF Research Database (Denmark)

Bukhsh, W. A.; Papakonstantinou, Athanasios; Pinson, Pierre

2016-01-01

The large scale integration of renewable energy sources (RES) challenges power system planners and operators alike as it can potentially introduce the need for costly investments in infrastructure. Furthermore, traditional market clearing mechanisms are no longer optimal due to the stochastic...... nature of RES. This paper presents a risk-aware market clearing strategy for a network with significant shares of RES. We propose an electricity market that embeds the uncertainty brought by wind power and other stochastic renewable sources by accepting probabilistic offers and use a risk measure defined...

[Adapting the law to offer better protection to female victims of violence].

Science.gov (United States)

Durand, Édouard

2014-11-01

As society has become more aware of the seriousness and the extent of domestic violence, the law has been adapted in order to offer female victims better protection. These legislative changes are recent and still meet with some resistance. The act of the 9th of July 2010 modified penal and civil laws to take better account of the specificities of the mechanisms of domestic abuse and create appropriate tools. The law about real equality between women and men, approved by the National Assembly on the 23rd of July 2014, is in line with this same objective.

Internet MEMS design tools based on component technology

Science.gov (United States)

Brueck, Rainer; Schumer, Christian

1999-03-01

The micro electromechanical systems (MEMS) industry in Europe is characterized by small and medium sized enterprises specialized on products to solve problems in specific domains like medicine, automotive sensor technology, etc. In this field of business the technology driven design approach known from micro electronics is not appropriate. Instead each design problem aims at its own, specific technology to be used for the solution. The variety of technologies at hand, like Si-surface, Si-bulk, LIGA, laser, precision engineering requires a huge set of different design tools to be available. No single SME can afford to hold licenses for all these tools. This calls for a new and flexible way of designing, implementing and distributing design software. The Internet provides a flexible manner of offering software access along with methodologies of flexible licensing e.g. on a pay-per-use basis. New communication technologies like ADSL, TV cable of satellites as carriers promise to offer a bandwidth sufficient even for interactive tools with graphical interfaces in the near future. INTERLIDO is an experimental tool suite for process specification and layout verification for lithography based MEMS technologies to be accessed via the Internet. The first version provides a Java implementation even including a graphical editor for process specification. Currently, a new version is brought into operation that is based on JavaBeans component technology. JavaBeans offers the possibility to realize independent interactive design assistants, like a design rule checking assistants, a process consistency checking assistants, a technology definition assistants, a graphical editor assistants, etc. that may reside distributed over the Internet, communicating via Internet protocols. Each potential user thus is able to configure his own dedicated version of a design tool set dedicated to the requirements of the current problem to be solved.

Probabilistic safety assessment- a tool for configuration control of nuclear power plants

International Nuclear Information System (INIS)

Vijaya, A.K.; Guptan, Rajee; Mohan, Nalini; Ghadge, S.G.; Bajaj, S.S.

2006-01-01

A comprehensive configuration control programme implies a sophisticated set of risk related measures to manage and control concurrent unavailabilities of components, the possibility of functional alternative components, the outage times of the unavailable components and the frequency of critical configurations. These measures are implemented through operational and maintenance activities such as maintenance and test scheduling and scheduling of operational realignments. An appropriate risk based configuration control programme would enable plant personnel to maintain the risk level of the nuclear power plant within an acceptable range during all the operational regimes. Use of plant specific PSA to support configuration control makes it risk based. The PSA can help to identify the measures needed according to the situation to reduce risk to acceptable level. The main benefit of establishing a risk based configuration control programme is the reduction of risk peaks and the control of cumulative or average risk. It helps to ensure that as far as possible, the plant does not enter the critical, high risk situations and other risk significant configurations are avoided A plant specific PSA along with a 'Risk Monitor' can be used as an efficient tool for Configuration Control. (author)

Special offer

CERN Multimedia

Staff Association

2011-01-01

SPECIAL OFFER FOR OUR MEMBERS Tarif unique Adulte/Enfant Entrée Zone terrestre 19 euros instead of 23 euros Entrée “Zone terrestre + aquatique” 24 euros instead of 31 euros Free for children under 3, with limited access to the attractions. Walibi Rhône-Alpes is open daily from 22 June to 31 August, and every week end from 3 September until 31 October. Closing of the “zone aquatique” 11 September.

Market Timing, lifecycle stage and Seasoned Equity offerings

Directory of Open Access Journals (Sweden)

Vilma Sousa Ismael da Costa

2014-08-01

Full Text Available The tradeoff theory suggests that companies must issue shares to investments, when its leverage index is greater than your target rate, while the pecking order theory predicts that when capital offerings occur, the capital will be used to finance investments as the last source of funding, after their debt capacity have been exhausted. In contrast, the market timing theory predicts arguments that companies will adopt opportunistic behavior by issuing shares to take advantage of the high prices of the shares. Although the market timing theory has a significant influence on the decision to make a SEO, Brazilian literature contains little evidence about their economic importance and their effects. Thus, the present research aims to fill this gap in the Brazilian scenario. Specifically, we sought to assess the explanatory power of the relationship of market timing and the lifecycle theory in the issuance of SEO, which predicts that young companies with high market-to-book (MB and low operating cash flow sell shares to finance the investment, while mature companies, with low MB, pay dividends and fund investment internally. The sample was composed by non-financial companies with shares traded on BM&FBovespa. As main results, we can conclude that there is relationship between SEO and MB and size. On the other hand, were not observed evidence confirming the relationship between lifecycle stage and stock return, both in the previous year, and the year following the completion of the offer.

Marketing strategy to differentiate the offer

OpenAIRE

Miceski, Trajko; Pasovska, Silvana

2013-01-01

The marketing strategy for differentiation of the offers is important and accepted strategy especially by the bigger legal entities. The differentiation of the offers leads to bigger profit and bigger profitability in operation, through targeting of the demand towards the product of the enterprise. The vertical differentiation of the offers is directed towards the quality of the product itself which is observed as a something superior despite the competitive product which is observed as somet...

Scratch as a Computational Modelling Tool for Teaching Physics

Science.gov (United States)

Lopez, Victor; Hernandez, Maria Isabel

2015-01-01

The Scratch online authoring tool, which features a simple programming language that has been adapted to primary and secondary students, is being used more and more in schools as it offers students and teachers the opportunity to use a tool to build scientific models and evaluate their behaviour, just as can be done with computational modelling…

Power quality issues current harmonics

CERN Document Server

Mikkili, Suresh

2015-01-01

Power Quality Issues: Current Harmonics provides solutions for the mitigation of power quality problems related to harmonics. Focusing on active power filters (APFs) due to their excellent harmonic and reactive power compensation in two-wire (single phase), three-wire (three-phase without neutral), and four-wire (three-phase with neutral) AC power networks with nonlinear loads, the text:Introduces the APF technology, describing various APF configurations and offering guidelines for the selection of APFs for specific application considerationsCompares shunt active filter (SHAF) control strategi

17 CFR 230.253 - Offering circular.

Science.gov (United States)

2010-04-01

.... Repetition of information should be avoided; cross-referencing of information within the document is... COMPLETENESS OF ANY OFFERING CIRCULAR OR OTHER SELLING LITERATURE. THESE SECURITIES ARE OFFERED PURSUANT TO AN...

Using meteorological forecasts in on-line predictions of wind power

DEFF Research Database (Denmark)

Nielsen, Torben Skov; Nielsen, Henrik Aalborg; Madsen, Henrik

1999-01-01

This report describes a model investigation into wind power prediction model as well as a tool for predicting the power production from wind turbines in an area - the Wind Power Prediction Tool (WPPT). The predictions are based on on-line measurements of power production for a selected set...

Severe accident management guidelines tool

International Nuclear Information System (INIS)

Gutierrez Varela, Javier; Tanarro Onrubia, Augustin; Martinez Fanegas, Rafael

2014-01-01

Severe Accident is addressed by means of a great number of documents such as guidelines, calculation aids and diagnostic trees. The response methodology often requires the use of several documents at the same time while Technical Support Centre members need to assess the appropriate set of equipment within the adequate mitigation strategies. In order to facilitate the response, TECNATOM has developed SAMG TOOL, initially named GGAS TOOL, which is an easy to use computer program that clearly improves and accelerates the severe accident management. The software is designed with powerful features that allow the users to focus on the decision-making process. Consequently, SAMG TOOL significantly improves the severe accident training, ensuring a better response under a real situation. The software is already installed in several Spanish Nuclear Power Plants and trainees claim that the methodology can be followed easier with it, especially because guidelines, calculation aids, equipment information and strategies availability can be accessed immediately (authors)

SCALES : A System Level Tool for Conceptual Design of Nano- and Microsatellites

NARCIS (Netherlands)

Aas, C.; Zandbergen, B.T.C.; Hamann, R.J.; Gill, E.K.A.

2009-01-01

A satellite design tool has been developed offering systems engineers a fast way to analyze the feasibility of a particular design concept. The tool differs from available tools on the market in that it is specifically targeted at small satellites in the mass range of 1-50 kg, and with a limited

New CFD tools to evaluate nasal airflow.

Science.gov (United States)

Burgos, M A; Sanmiguel-Rojas, E; Del Pino, C; Sevilla-García, M A; Esteban-Ortega, F

2017-08-01

Computational fluid dynamics (CFD) is a mathematical tool to analyse airflow. As currently CFD is not a usual tool for rhinologists, a group of engineers in collaboration with experts in Rhinology have developed a very intuitive CFD software. The program MECOMLAND ® only required snapshots from the patient's cross-sectional (tomographic) images, being the output those results originated by CFD, such as airflow distributions, velocity profiles, pressure, temperature, or wall shear stress. This is useful complementary information to cover diagnosis, prognosis, or follow-up of nasal pathologies based on quantitative magnitudes linked to airflow. In addition, the user-friendly environment NOSELAND ® helps the medical assessment significantly in the post-processing phase with dynamic reports using a 3D endoscopic view. Specialists in Rhinology have been asked for a more intuitive, simple, powerful CFD software to offer more quality and precision in their work to evaluate the nasal airflow. We present MECOMLAND ® and NOSELAND ® which have all the expected characteristics to fulfil this demand and offer a proper assessment with the maximum of quality plus safety for the patient. These programs represent a non-invasive, low-cost (as the CT scan is already performed in every patient) alternative for the functional study of the difficult rhinologic case. To validate the software, we studied two groups of patients from the Ear Nose Throat clinic, a first group with normal noses and a second group presenting septal deviations. Wall shear stresses are lower in the cases of normal noses in comparison with those for septal deviation. Besides, velocity field distributions, pressure drop between nasopharynx and the ambient, and flow rates in each nostril were different among the nasal cavities in the two groups. These software modules open up a promising future to simulate the nasal airflow behaviour in virtual surgery intervention scenarios under different pressure or

Custom power - the utility solution to distribution power quality

Energy Technology Data Exchange (ETDEWEB)

Woodley, N H [Westinghouse Electric Corp., Pittsburgh, PA (United States)

1997-04-01

The design of custom power products for electric power distribution system was discussed. Problems with power quality that result in loss of production to critical processes are costly and create a problem for the customer as well as the electric utility. Westinghouse has developed power quality improvement equipment for customers and utilities, using new technologies based on power electronics concepts. The Distribution Static Compensator (DSTATCOM) is a fast response, solid-state power controller that provides flexible voltage control for improving power quality at the point of connection to the utility`s 4.16 to 69 kV distribution feeder. STATCOM is a larger version of the DSTATCOM that can be used to solve voltage flicker problems caused by electric arc furnaces. Westinghouse has also developed a Dynamic Voltage Restorer (DVR) which protects a critical customer plant load from power system voltage disturbances. Solid-State Breakers (SSB) have also been developed which offer a solution to many of the distribution system problems that result in voltage sags, swells, and power outages. 6 refs., 8 figs.

A low-power tool for measuring acceleration, pressure, and temperature (APT) with wide dynamic range and bandwidth

Science.gov (United States)

Heesemann, Martin; Davis, Earl E.; Paros, Jerome; Johnson, Greg; Meldrum, Robert; Scherwath, Martin; Mihaly, Steven

2017-04-01

We present a new tool that facilitates the study of inter-related geodetic, geodynamic, seismic, and oceanographic phenomena. It incorporates a temperature compensated tri-axial accelerometer developed by Quartz Seismic Sensors, Inc., a pressure sensor built by Paroscientific Inc., and a low-power, high-precision frequency counter developed by Bennest Enterprises Ltd. and built by RBR, Ltd. The sensors are housed in a 7 cm o.d. titanium pressure case designed for use to full ocean depths (withstands more than 20 km of water pressure). Sampling intervals are programmable from 0.08 s to 1 hr; standard memory can store up to 130 million samples; total power consumption is roughly 115 mW when operating continuously and proportionately lower when operating intermittently (e.g., 2 mW average at 1 sample per min). Serial and USB communications protocols allow a variety of autonomous and cable-connection options. Measurement precision of the order of 10-8 of full scale (e.g., pressure equivalent to 4000 m water depth, acceleration = +/- 3 g) allows observations of pressure and acceleration variations of 0.4 Pa and 0.3 μm s-2. Long-term variations in vertical acceleration are sensitive to displacement through the gravity gradient down to a level of roughly 2 cm, and variations in horizontal acceleration are sensitive to tilt down to a level of 0.03 μrad. With the large dynamic ranges, high sensitivities and broad bandwidth (6 Hz to DC), ground motion associated with microseisms, strong and weak seismic ground motion, tidal loading, and slow and rapid geodynamic deformation - all normally studied using disparate instruments - can be observed with a single tool. Installation in the marine environment is accomplished by pushing the tool roughly 1 m vertically below the seafloor with a submersible or remotely operated vehicle, with no profile remaining above the seafloor to cause current-induced noise. The weight of the tool is designed to match the sediment it displaces to

DIGITAL SOLUTION FOR FAST EVALUATION OF THE POWER FACTOR IN POWER NETWORKS

Directory of Open Access Journals (Sweden)

Adrian Gligor

2017-06-01

Full Text Available Power quality evaluation involves measurements and determinations of some power quality indicators. One of these indicators is represented by the power factor. The importance of the power factor as an indicator of power quality, both theoretical and practical, implies its determination or direct measurement as a necessity, especially in industrial environments where the optimization of energy costs is a primary target. Considering these, the determination of this power quality indicator implies multiple or sophisticated measurement tools. As a result, the present paper aims to present a solution for an easier evaluation of the power factor. The proposed solution can be integrated in numerical control systems for reactive power monitoring or in supervision and control systems in order to extend the applicability for the automatic power factor improvement. The proposed solution is characterized by simplicity and a low cost of implementation, representing an effective learning tool in the professional training in the electricity field. The configuration of the measurement circuit was designed to allow the measurement of a wide range of the power factor, starting from the case of inductive consumers to the case of capacitive consumers, noting that in the case of strongly deformed regimes the results shows significant deviations from the expected ones fact that is extensively exposed and motivated in the paper.

Seeded emulsion polymerization as a powerful tool for the biofunctionalization of quantum dots

Energy Technology Data Exchange (ETDEWEB)

Habercorn, Lasse; Merkl, Jan-Philip; Kloust, Hauke Christian; Feld, Artur; Schmidtke, Christian; Wolter, Christopher; Janschel, Marcus [Institute of Physical Chemistry, University of Hamburg, Grindelallee 117, 20146 Hamburg (Germany); Ostermann, Johannes [Center for Applied Nanotechnology GmbH, Grindelallee 117, 20146 Hamburg (Germany); Weller, Horst [Institute of Physical Chemistry, University of Hamburg, Grindelallee 117, 20146 Hamburg (Germany); Center for Applied Nanotechnology GmbH, Grindelallee 117, 20146 Hamburg (Germany)

2016-05-18

With the polymer encapsulation of quantum dots via seeded emulsion polymerization we present a powerful tool for the preparation of fluorescent nanoparticles with an extraordinary stability in aqueous solution. The method of the seeded emulsion polymerization allows a straightforward and simple in situ functionalization of the polymer shell under preserving the optical properties of the quantum dots. These requirements are inevitable for the application of semiconductor nanoparticles as markers for biomedical applications. Polymer encapsulated quantum dots have shown only a marginal loss of quantum yields when they were exposed to copper(II)-ions. Under normal conditions the quantum dots were totally quenched in presence of copper(II)-ions. Furthermore, a broad range of in situ functionalized polymer-coated quantum dots were obtained by addition of functional monomers or surfactants like fluorescent dye molecules, antibodies or specific DNA aptamers. Furthermore the emulsion polymerization can be used to prepare multifunctional hybrid systems, combining different nanoparticles within one construct without any adverse effect of the properties of the starting materials.{sup 1,2}.

Seeded emulsion polymerization as a powerful tool for the biofunctionalization of quantum dots

International Nuclear Information System (INIS)

Habercorn, Lasse; Merkl, Jan-Philip; Kloust, Hauke Christian; Feld, Artur; Schmidtke, Christian; Wolter, Christopher; Janschel, Marcus; Ostermann, Johannes; Weller, Horst

2016-01-01

With the polymer encapsulation of quantum dots via seeded emulsion polymerization we present a powerful tool for the preparation of fluorescent nanoparticles with an extraordinary stability in aqueous solution. The method of the seeded emulsion polymerization allows a straightforward and simple in situ functionalization of the polymer shell under preserving the optical properties of the quantum dots. These requirements are inevitable for the application of semiconductor nanoparticles as markers for biomedical applications. Polymer encapsulated quantum dots have shown only a marginal loss of quantum yields when they were exposed to copper(II)-ions. Under normal conditions the quantum dots were totally quenched in presence of copper(II)-ions. Furthermore, a broad range of in situ functionalized polymer-coated quantum dots were obtained by addition of functional monomers or surfactants like fluorescent dye molecules, antibodies or specific DNA aptamers. Furthermore the emulsion polymerization can be used to prepare multifunctional hybrid systems, combining different nanoparticles within one construct without any adverse effect of the properties of the starting materials."1","2

Wireless Power Transmission Options for Space Solar Power

Science.gov (United States)

Potter, Seth; Davis, Dean; Born, Martin; Bayer, Martin; Howell, Joe; Mankins, John

2008-01-01

Space Solar Power (SSP), combined with Wireless Power Transmission (WPT), offers the far-term potential to solve major energy problems on Earth. In the long term, we aspire to beam energy to Earth from geostationary Earth orbit (GEO), or even further distances in space. In the near term, we can beam power over more moderate distances, but still stretch the limits of today s technology. In recent studies, a 100 kWe-class "Power Plug" Satellite and a 10 kWe-class Lunar Polar Solar Power outpost have been considered as the first steps in using these WPT options for SSP. Our current assessments include consideration of orbits, wavelengths, and structural designs to meet commercial, civilian government, and military needs. Notional transmitter and receiver sizes are considered for use in supplying 5 to 40 MW of power. In the longer term, lunar or asteroidal material can be used. By using SSP and WPT technology for near-term missions, we gain experience needed for sound decisions in designing and developing larger systems to send power from space to Earth.

An Offer You Cannot Refuse: Obtaining Efficiency and Fairness in Preplay Negotiation Games with Conditional Offers

DEFF Research Database (Denmark)

Goranko, Valentin; Turrini, Paolo

2013-01-01

. Such offers transform the payoff matrix of the original game and allow for some degree of cooperation between rational players while preserving the non-cooperative nature of the game. We focus on 2-player negotiations games arising in the preplay phase when offers for payments are made conditional...... on a suggested matching offer of the same kind being made in return by the receiver. We study and analyze such bargaining games, obtain results describing their possible solutions and discuss the degrees of efficiency and fairness that can be achieved in such negotiation process depending on whether time...

Permanent magnetic ferrite based power-tunable metamaterials

Energy Technology Data Exchange (ETDEWEB)

Zhang, Guanqiao; Lan, Chuwen [State Key Laboratory of New Ceramics and Fine Processing, School of Materials Science and Engineering, Tsinghua University, Beijing 100084 (China); Gao, Rui [High Temperature Thermochemistry Laboratory, Department of Mining and Materials Engineering, McGill University, Montreal, Quebec H3A 0C5 (Canada); Zhou, Ji, E-mail: zhouji@tsinghua.edu.cn [State Key Laboratory of New Ceramics and Fine Processing, School of Materials Science and Engineering, Tsinghua University, Beijing 100084 (China)

2017-08-15

Highlights: • Power-tunable metamaterials based on barium permanent magnetic ferrite have been proposed and fabricated. • It is observed that resonant frequency of the array shifts upon altering the output power. • This kind of power-tunable behavior is due to the temperature rise as a result of FMR-induced heat buildup. • This work offers a practical idea to tune ferrite metamaterials besides magneto-tunability and thermal-tunability. - Abstract: Power-tunable metamaterials based on barium permanent magnetic ferrite have been proposed and fabricated in this research. Scattering parameter measurements confirm a shift in resonant frequency in correlation to changes in incident electromagnetic power within microwave frequency band. The tunable phenomenon represented by a blue-shift in transmission spectra in the metamaterials array can be attributed to a decrease in saturation magnetization resulting from FMR-induced temperature elevation upon resonant conditions. This power-dependent behavior offers a simple and practical route towards dynamically fine-tunable ferrite metamaterials.

Commercial nuclear power: Assuring safety for the future

International Nuclear Information System (INIS)

Ramsey, C.B.; Modarres, M.

1998-03-01

This timely book offers insights into the benefits of nuclear power as well as the technological and environmental challenges facing the nuclear industry. Containing the results of worldwide scientific studies and industrial site visits, the book represents a timely focus on the applications of commercial nuclear power, the potential benefits to be gained from contained nuclear use, the environmental risks of nuclear power, and the prevention of nuclear accidents.This timely book offers insights into the benefits of nuclear power as well as the technological and environmental challenges facing the nuclear industry. Containing the results of worldwide scientific studies and industrial site visits, the book represents a timely focus on the applications of commercial nuclear power, the potential benefits to be gained from contained nuclear use, the environmental risks of nuclear power, and the prevention of nuclear accidents

Dynamic fault simulation of wind turbines using commercial simulation tools

DEFF Research Database (Denmark)

Lund, Torsten; Eek, Jarle; Uski, Sanna

2005-01-01

This paper compares the commercial simulation tools: PSCAD/EMTDC, PowerFactory, SIMPOW and PSS/E for analysing fault sequences defined in the Danish grid code requirements for wind turbines connected to a voltage level below 100 kV. Both symmetrical and unsymmetrical faults are analysed. The devi......This paper compares the commercial simulation tools: PSCAD/EMTDC, PowerFactory, SIMPOW and PSS/E for analysing fault sequences defined in the Danish grid code requirements for wind turbines connected to a voltage level below 100 kV. Both symmetrical and unsymmetrical faults are analysed....... The deviations and the reasons for the deviations between the tools are stated. The simulation models are imple-mented using the built-in library components of the simulation tools with exception of the mechanical drive-train model, which had to be user-modeled in PowerFactory and PSS/E....

Sustainable Offering Practices Through Stakeholders Engagement

Directory of Open Access Journals (Sweden)

Bijay Prasad Kushwaha

2018-02-01

Full Text Available Sustainable development is achieved by satisfying the current ends without shrinking the existing means which can serve as needs for the society in the future. It has become global motive and responsibility of present community to utilize resources in an optimum way with minimum environmental damage. The objective of this paper is to study theoretical framework and practical approaches on sustainable offering practices through customer engagement. The study has also examined the opportunities and challenges of sustainable offering practices in India. The study is based on a previous study and secondary data has been used for analysis. The outcome revealed the process for successful sustainable offering practices in context of Indian consumers. The analysis has helped to understand different practices of sustainable offering through engaging stakeholders.

New Tools for Sea Ice Data Analysis and Visualization: NSIDC's Arctic Sea Ice News and Analysis

Science.gov (United States)

Vizcarra, N.; Stroeve, J.; Beam, K.; Beitler, J.; Brandt, M.; Kovarik, J.; Savoie, M. H.; Skaug, M.; Stafford, T.

2017-12-01

Arctic sea ice has long been recognized as a sensitive climate indicator and has undergone a dramatic decline over the past thirty years. Antarctic sea ice continues to be an intriguing and active field of research. The National Snow and Ice Data Center's Arctic Sea Ice News & Analysis (ASINA) offers researchers and the public a transparent view of sea ice data and analysis. We have released a new set of tools for sea ice analysis and visualization. In addition to Charctic, our interactive sea ice extent graph, the new Sea Ice Data and Analysis Tools page provides access to Arctic and Antarctic sea ice data organized in seven different data workbooks, updated daily or monthly. An interactive tool lets scientists, or the public, quickly compare changes in ice extent and location. Another tool allows users to map trends, anomalies, and means for user-defined time periods. Animations of September Arctic and Antarctic monthly average sea ice extent and concentration may also be accessed from this page. Our tools help the NSIDC scientists monitor and understand sea ice conditions in near real time. They also allow the public to easily interact with and explore sea ice data. Technical innovations in our data center helped NSIDC quickly build these tools and more easily maintain them. The tools were made publicly accessible to meet the desire from the public and members of the media to access the numbers and calculations that power our visualizations and analysis. This poster explores these tools and how other researchers, the media, and the general public are using them.

Electricity of machine tool

International Nuclear Information System (INIS)

Gijeon media editorial department

1977-10-01

This book is divided into three parts. The first part deals with electricity machine, which can taints from generator to motor, motor a power source of machine tool, electricity machine for machine tool such as switch in main circuit, automatic machine, a knife switch and pushing button, snap switch, protection device, timer, solenoid, and rectifier. The second part handles wiring diagram. This concludes basic electricity circuit of machine tool, electricity wiring diagram in your machine like milling machine, planer and grinding machine. The third part introduces fault diagnosis of machine, which gives the practical solution according to fault diagnosis and the diagnostic method with voltage and resistance measurement by tester.

FPGA Dynamic Power Minimization through Placement and Routing Constraints

Directory of Open Access Journals (Sweden)

Deepak Agarwal

2006-08-01

Full Text Available Field-programmable gate arrays (FPGAs are pervasive in embedded systems requiring low-power utilization. A novel power optimization methodology for reducing the dynamic power consumed by the routing of FPGA circuits by modifying the constraints applied to existing commercial tool sets is presented. The power optimization techniques influence commercial FPGA Place and Route (PAR tools by translating power goals into standard throughput and placement-based constraints. The Low-Power Intelligent Tool Environment (LITE is presented, which was developed to support the experimentation of power models and power optimization algorithms. The generated constraints seek to implement one of four power optimization approaches: slack minimization, clock tree paring, N-terminal net colocation, and area minimization. In an experimental study, we optimize dynamic power of circuits mapped into 0.12 μm Xilinx Virtex-II FPGAs. Results show that several optimization algorithms can be combined on a single design, and power is reduced by up to 19.4%, with an average power savings of 10.2%.

Dynamic Power Management for Portable Hybrid Power-Supply Systems Utilizing Approximate Dynamic Programming

Directory of Open Access Journals (Sweden)

Jooyoung Park

2015-05-01

Full Text Available Recently, the optimization of power flows in portable hybrid power-supply systems (HPSSs has become an important issue with the advent of a variety of mobile systems and hybrid energy technologies. In this paper, a control strategy is considered for dynamically managing power flows in portable HPSSs employing batteries and supercapacitors. Our dynamic power management strategy utilizes the concept of approximate dynamic programming (ADP. ADP methods are important tools in the fields of stochastic control and machine learning, and the utilization of these tools for practical engineering problems is now an active and promising research field. We propose an ADP-based procedure based on optimization under constraints including the iterated Bellman inequalities, which can be solved by convex optimization carried out offline, to find the optimal power management rules for portable HPSSs. The effectiveness of the proposed procedure is tested through dynamic simulations for smartphone workload scenarios, and simulation results show that the proposed strategy can successfully cope with uncertain workload demands.

Market value of wind power

NARCIS (Netherlands)

Haan, de J.E.S.; Shoeb, M.A.; Lopes Ferreira, H.M.; Kling, W.L.

2013-01-01

Variability and predictability constraints of wind hinder the cost-efficient integration of wind power generation into power markets. Within the framework of EIT KIC INNOENERGY Offwindtech project, a ‘Market Value’ tool is developed. Here, the market value of wind power generation can be assessed

Risk handling in the power market

International Nuclear Information System (INIS)

Lindbaek-Nilsen, Brian; Strand, Krister

2004-01-01

In 1991 a new energy law was implemented in Norway. The Norwegian power market became deregulated and the law created a basis for a market based trade of electrical energy in Norway. In 1998 Nord Pool was founded and this has gradually become a common Nordic power exchange. The power market is characterized by large price fluctuations periodically. The reason is a variable resource supply and demand. In important factor in this context is that electricity cannot be stored after production. The large variations in supply and demand lead to large market risks for the involved parties. The derivate markets make hedging possible and thereby make it possible for the parties to guard against risks connected to future prices. This study presents risk elements in the power market, supplier and consumer sectors in view of the deregulation. In addition the present and future risk management is studied in with focus upon power suppliers that offer one-year fixed price contracts to the consumers. A study focuses on how a supplier may secure a certain volume of power in a year against price fluctuations in the market. As a basis the term market at Nord Pool is used and based on historical facts an estimated price for a supplier to eliminate the price risk for the volume is stipulated. This price is called the hedging cost and is compared with the offer a selection of power suppliers have for their one-year fixed price contracts. The possible difference between the two prices may be regarded as the power supplier risk price (premium) by offering these one-year fixed price contracts to the end consumers. The most surprising in the results in this study is how close the hedging costs are to the prices on the fixed price contracts. This means that compared to the hedging costs in the study the power suppliers operated with a small margin. Another tendency is that the fixed price contracts do not seem to have a high correlation to the hedging costs even if some companies follow the

Power in Transition: Empowering Discourses on Sustainability Transitions

NARCIS (Netherlands)