OECD/NEA International Benchmark exercises: Validation of CFD codes applied nuclear industry; OECD/NEA internatiion Benchmark exercices: La validacion de los codigos CFD aplicados a la industria nuclear

Energy Technology Data Exchange (ETDEWEB)

Pena-Monferrer, C.; Miquel veyrat, A.; Munoz-Cobo, J. L.; Chiva Vicent, S.

2016-08-01

In the recent years, due, among others, the slowing down of the nuclear industry, investment in the development and validation of CFD codes, applied specifically to the problems of the nuclear industry has been seriously hampered. Thus the International Benchmark Exercise (IBE) sponsored by the OECD/NEA have been fundamental to analyze the use of CFD codes in the nuclear industry, because although these codes are mature in many fields, still exist doubts about them in critical aspects of thermohydraulic calculations, even in single-phase scenarios. The Polytechnic University of Valencia (UPV) and the Universitat Jaume I (UJI), sponsored by the Nuclear Safety Council (CSN), have actively participated in all benchmark's proposed by NEA, as in the expert meetings,. In this paper, a summary of participation in the various IBE will be held, describing the benchmark itself, the CFD model created for it, and the main conclusions. (Author)

ASTEC validation on PANDA SETH

International Nuclear Information System (INIS)

Bentaib, Ahmed; Bleyer, Alexandre; Schwarz, Siegfried

2009-01-01

The ASTEC code development by IRSN and GRS is aimed to provide an integral code for the simulation of the whole course of severe accidents in Light-Water Reactors. ASTEC is a complex system of codes for reactor safety assessment. In this validation, only the thermal-hydraulic module of ASTEC code is used. ASTEC is a lumped-parameter code able to represent multi-compartment containments. It uses the following main elements: zones (compartments), junctions (liquids and atmospherics) and structures. The zones are connected by junctions and contain steam, water and non condensable gases. They exchange heat with structures by different heat transfer regimes: convection, radiation and condensation. This paper presents the validation of ASTEC V1.3 on the tests T9 and T9bis, of the PANDA OECD/SETH experimental program, investigating the impact of injection velocity and steam condensation on the plume shape and on the gas distribution. Dedicated meshes were developed to simulate the test facility with the two vessels DW1, DW2 and the interconnection pipe. The obtained numerical results are analyzed and compared to the experiments. The comparison shows a good agreement between experiments and calculations. (author)

Analysis of the OECD main steam line break benchmark using ANC-K/MIDAC code

International Nuclear Information System (INIS)

Aoki, Shigeaki; Tahara, Yoshihisa; Suemura, Takayuki; Ogawa, Junto

2004-01-01

A three-dimensional (3D) neutronics and thermal-and-hydraulics (T/H) coupling code ANC-K/MIDAC has been developed. It is the combination of the 3D nodal kinetic code ANC-K and the 3D drift flux thermal hydraulic code MIDAC. In order to verify the adequacy of this code, we have performed several international benchmark problems. In this paper, we show the calculation results of ''OECD Main Steam Line Break Benchmark (MSLB benchmark)'', which gives the typical local power peaking problem. And we calculated the return-to-power scenario of the Phase II problem. The comparison of the results shows the very good agreement of important core parameters between the ANC-K/MIDAC and other participant codes. (author)

The OECD/NEA/NSC PBMR400 MW coupled neutronics thermal hydraulics transient benchmark - Steady-state results and status

International Nuclear Information System (INIS)

Reitsma, F.; Han, J.; Ivanov, K.; Sartori, E.

2008-01-01

The PBMR is a High-Temperature Gas-cooled Reactor (HTGR) concept developed to be built in South Africa. The analysis tools used for core neutronic design and core safety analysis need to be verified and validated. Since only a few pebble-bed HTR experimental facilities or plant data are available the use of code-to-code comparisons are an essential part of the V and V plans. As part of this plan the PBMR 400 MW design and a representative set of transient cases is defined as an OECD benchmark. The scope of the benchmark is to establish a series of well-defined multi-dimensional computational benchmark problems with a common given set of cross-sections, to compare methods and tools in coupled neutronics and thermal hydraulics analysis with a specific focus on transient events. The OECD benchmark includes steady-state and transients cases. Although the focus of the benchmark is on the modelling of the transient behaviour of the PBMR core, it was also necessary to define some steady-state cases to ensure consistency between the different approaches before results of transient cases could be compared. This paper describes the status of the benchmark project and shows the results for the three steady state exercises defined as a standalone neutronics calculation, a standalone thermal-hydraulic core calculation, and a coupled neutronics/thermal-hydraulic simulation. (authors)

The OECD/NEA Data Bank, its computer program services and benchmarking activities

International Nuclear Information System (INIS)

Sartori, E.; Galan, J.M.

1998-01-01

The OECD/NEA Data Bank collects, tests and distributes computer programs and numerical data in the field of nuclear energy applications. This activity is coordinated with several similar centres in the United States (ESTSC, NNDC, RSIC) and outside the OECD area through an arrangement with the IAEA. This information is shared worldwide for the benefit of scientists and engineers working on the safe and economic use of nuclear energy. The OECD/NEA Nuclear Science Committee the supervising body of the Data Bank has conducted a series of international computer code benchmark exercises with the aim of verifying the correctness of codes, of building confidence in models used for predicting macroscopic behaviour of nuclear systems and to drive towards refinement of models where necessary. Exercises involving nuclear cross section predictions, in-core reactor physics issues, such as pin cells for different type of reactors, plutonium recycling, reconstruction of pin power within assemblies, core transients, reactor shielding and dosimetry, away from reactor issues such as criticality safety for transport and storage of spent fuel, shielding of radioactive material packages and other problems connected with the back end of the fuel cycle, are listed and the relevant references provided. (author)

OECD/NRC Benchmark Based on NUPEC PWR Sub-channel and Bundle Test (PSBT). Volume I: Experimental Database and Final Problem Specifications

International Nuclear Information System (INIS)

Rubin, A.; Schoedel, A.; Avramova, M.; Utsuno, H.; Bajorek, S.; Velazquez-Lozada, A.

2012-01-01

The need to refine models for best-estimate calculations, based on good-quality experimental data, has been expressed in many recent meetings in the field of nuclear applications. The needs arising in this respect should not be limited to the currently available macroscopic methods but should be extended to next-generation analysis techniques that focus on more microscopic processes. One of the most valuable databases identified for the thermal-hydraulics modelling was developed by the Nuclear Power Engineering Corporation (NUPEC), Japan, which includes sub-channel void fraction and departure from nucleate boiling (DNB) measurements in a representative Pressurised Water Reactor (PWR) fuel assembly. Part of this database has been made available for this international benchmark activity entitled 'NUPEC PWR Sub-channel and Bundle Tests (PSBT) benchmark'. This international project has been officially approved by the Japanese Ministry of Economy, Trade, and Industry (METI), the US Nuclear Regulatory Commission (NRC) and endorsed by the OECD/NEA. The benchmark team has been organised based on the collaboration between Japan and the USA. A large number of international experts have agreed to participate in this programme. The fine-mesh high-quality sub-channel void fraction and departure from nucleate boiling data encourages advancement in understanding and modelling complex flow behaviour in real bundles. Considering that the present theoretical approach is relatively immature, the benchmark specification is designed so that it will systematically assess and compare the participants' analytical models on the prediction of detailed void distributions and DNB. The development of truly mechanistic models for DNB prediction is currently underway. The benchmark problem includes both macroscopic and microscopic measurement data. In this context, the sub-channel grade void fraction data are regarded as the macroscopic data and the digitised computer graphic images are the

Obituary: Seth L. Tuttle (1931-2011)

Science.gov (United States)

Eriksson, Samantha

2011-12-01

Seth L. Tuttle, 80, a retired physicist who worked 25 years at the National Science Foundation (NSF) died on August 8, 2011, at the Dove House hospice in Westminster, MD, from complications of a fall that he suffered while visiting his son in Denver, in December, 2010 and that left him a quadriplegic. Seth was a native of Spokane, Washington. In High School he was student body president, "Thespian of the Year," played football, basketball and tennis and graduated as the valedictorian, winning several scholarships, including one from the National Honor Society. He attended the University of Idaho but dropped out and in 1951 enlisted in the Army. He graduated from the Infantry Candidate School and Paratrooper Jump School and served during the Korean War, a tour of duty he was very proud of and of which he had many memories that he liked to share. At the end of the Korean War he got out of the Army, and went back to school, finishing with a degree in Math in 1955 at the University of Washington. He next attended graduate school at the U of Michigan, majoring in astronomy, but interrupted his studies once again and went to work for the Michigan Institute of Science and Technology (MIST). At MIST he headed the Launch Phase Analysis group of the Ballistic Missile Radiation Analysis Center, analyzing models of radiation from ballistic missiles for the US Early Warning System. Later he became Deputy Director of a project that designed, built and operated an observatory on Maui, Hawaii, dedicated to track missiles and satellites. In 1971 Seth moved to Washington, DC with his family, to work at the Institute for Defense Analysis on missile defense and optical and infrared physics matters of interest to the Defense Department. In 1974, in a complete turnaround from defense oriented work, he went to the NSF as Program Manager for Energy Conservation and Energy Systems research. A few years later when the Department of Energy (DoE) was established, NSF's energy related programs

Selected examples on multi physics researches at KFKI AEKI-results for phase I of the OECD/NEA UAM benchmark

International Nuclear Information System (INIS)

Panka, I.; Kereszturi, A.; Maraczy, C.

2010-01-01

Nowadays, there is a tendency to use best estimate plus uncertainty methods in the field of nuclear energy. This implies the application of best estimate code systems and the determination of the corresponding uncertainties. For the latter one an OECD benchmark was set up. The objective of the OECD/NEA Uncertainty Analysis in Best-Estimate Modeling (UAM) LWR benchmark is to determine the uncertainties of the coupled reactor physics/thermal hydraulics LWR calculations at all stages. In this paper the AEKI participation in Phase I will be presented. This Phase is dealing with the evaluation of the uncertainties of the neutronic calculations starting from the pin cell spectral calculations up to the stand-alone neutronics core simulations. (Authors)

Reactor based plutonium disposition - physics and fuel behaviour benchmark studies of an OECD/NEA experts group

International Nuclear Information System (INIS)

D'Hondt, P.; Gehin, J.; Na, B.C.; Sartori, E.; Wiesenack, W.

2001-01-01

One of the options envisaged for disposing of weapons grade plutonium, declared surplus for national defence in the Russian Federation and Usa, is to burn it in nuclear power reactors. The scientific/technical know-how accumulated in the use of MOX as a fuel for electricity generation is of great relevance for the plutonium disposition programmes. An Expert Group of the OECD/Nea is carrying out a series of benchmarks with the aim of facilitating the use of this know-how for meeting this objective. This paper describes the background that led to establishing the Expert Group, and the present status of results from these benchmarks. The benchmark studies cover a theoretical reactor physics benchmark on a VVER-1000 core loaded with MOX, two experimental benchmarks on MOX lattices and a benchmark concerned with MOX fuel behaviour for both solid and hollow pellets. First conclusions are outlined as well as future work. (author)

Synthesis of the OECD/NEA-PSI CFD benchmark exercise

Energy Technology Data Exchange (ETDEWEB)

Andreani, Michele, E-mail: Michele.andreani@psi.ch; Badillo, Arnoldo; Kapulla, Ralf

2016-04-01

Highlights: • A benchmark exercise on stratification erosion in containment was conducted using a test in the PANDA facility. • Blind calculations were provided by nineteen participants. • Results were compared with experimental data. • A ranking was made. • A large spread of results was observed, with very few simulations providing accurate results for the most important variables, though not for velocities. - Abstract: The third International Benchmark Exercise (IBE-3) conducted under the auspices of OECD/NEA is based on the comparison of blind CFD simulations with experimental data addressing the erosion of a stratified layer by an off-axis buoyant jet in a large vessel. The numerical benchmark exercise is based on a dedicated experiment in the PANDA facility conducted at the Paul Scherrer Institut (PSI) in Switzerland, using only one vessel. The use of non-prototypical fluids (i.e. helium as simulant for hydrogen, and air as simulant for steam), and the consequent absence of the complex physical effects produced by steam condensation enhanced the suitability of the data for CFD validation purposes. The test started with a helium–air layer at the top of the vessel and air in the lower part. The helium-rich layer was gradually eroded by a low-momentum air/helium jet emerging at a lower elevation. Blind calculation results were submitted by nineteen participants, and the calculation results have been compared with the PANDA data. This report, adopting the format of the reports for the two previous exercises, includes a ranking of the contributions, where the largest weight is given to the time progression of the erosion of the helium-rich layer. In accordance with the limited scope of the benchmark exercise, this report is more a collection of comparisons between calculated results and data than a synthesis. Therefore, the few conclusions are based on the mere observation of the agreement of the various submissions with the test result, and do not

OECD/NEZ Main Steam Line Break Benchmark Problem Exercise I Simulation Using the SPACE Code with the Point Kinetics Model

International Nuclear Information System (INIS)

Kim, Yohan; Kim, Seyun; Ha, Sangjun

2014-01-01

The Safety and Performance Analysis Code for Nuclear Power Plants (SPACE) has been developed in recent years by the Korea Nuclear Hydro and Nuclear Power Co. (KHNP) through collaborative works with other Korean nuclear industries. The SPACE is a best-estimated two-phase three-field thermal-hydraulic analysis code to analyze the safety and performance of pressurized water reactors (PWRs). The SPACE code has sufficient features to replace outdated vendor supplied codes and to be used for the safety analysis of operating PWRs and the design of advanced reactors. As a result of the second phase of the development, the 2.14 version of the code was released through the successive various V and V works. The topical reports on the code and related safety analysis methodologies have been prepared for license works. In this study, the OECD/NEA Main Steam Line Break (MSLB) Benchmark Problem Exercise I was simulated as a V and V work. The results were compared with those of the participants in the benchmark project. The OECD/NEA MSLB Benchmark Problem Exercise I was simulated using the SPACE code. The results were compared with those of the participants in the benchmark project. Through the simulation, it was concluded that the SPACE code can effectively simulate PWR MSLB accidents

CFD validation in OECD/NEA t-junction benchmark.

Energy Technology Data Exchange (ETDEWEB)

Obabko, A. V.; Fischer, P. F.; Tautges, T. J.; Karabasov, S.; Goloviznin, V. M.; Zaytsev, M. A.; Chudanov, V. V.; Pervichko, V. A.; Aksenova, A. E. (Mathematics and Computer Science); (Cambridge Univ.); (Moscow Institute of Nuclar Energy Safety)

2011-08-23

and benchmark data. The numerical scheme has a very small scheme diffusion and is the second and the first order accurate in space and time, correspondingly. We compare and contrast simulation results for three computational fluid dynamics codes CABARET, Conv3D, and Nek5000 for the T-junction thermal striping problem that was the focus of a recent OECD/NEA blind benchmark. The corresponding codes utilize finite-difference implicit large eddy simulation (ILES), finite-volume LES on fully staggered grids, and an LES spectral element method (SEM), respectively. The simulations results are in a good agreement with experimenatl data. We present results from a study of sensitivity to computational mesh and time integration interval, and discuss the next steps in the simulation of this problem.

The OECD/NEA/NSC PBMR 400 MW coupled neutronics thermal hydraulics transient benchmark: transient results - 290

International Nuclear Information System (INIS)

Strydom, G.; Reitsma, F.; Ngeleka, P.T.; Ivanov, K.N.

2010-01-01

The PBMR is a High-Temperature Gas-cooled Reactor (HTGR) concept developed to be built in South Africa. The analysis tools used for core neutronic design and core safety analysis need to be verified and validated, and code-to-code comparisons are an essential part of the V and V plans. As part of this plan the PBMR 400 MWth design and a representative set of transient exercises are defined as an OECD benchmark. The scope of the benchmark is to establish a series of well defined multi-dimensional computational benchmark problems with a common given set of cross sections, to compare methods and tools in coupled neutronics and thermal hydraulics analysis with a specific focus on transient events. This paper describes the current status of the benchmark project and shows the results for the six transient exercises, consisting of three Loss of Cooling Accidents, two Control Rod Withdrawal transients, a power load-follow transient, and a Helium over-cooling Accident. The participants' results are compared using a statistical method and possible areas of future code improvement are identified. (authors)

OECD/NRC BWR Turbine Trip Benchmark: Simulation by POLCA-T Code

International Nuclear Information System (INIS)

Panayotov, Dobromir

2004-01-01

Westinghouse transient code POLCA-T brings together the system thermal-hydraulics plant models and three-dimensional (3-D) neutron kinetics core models. Participation in the OECD/NRC BWR Turbine Trip (TT) Benchmark is a part of our efforts toward the code's validation. The paper describes the objectives for TT analyses and gives a brief overview of the developed plant system input deck and 3-D core model.The results of exercise 1, system model without netronics, are presented. Sensitivity studies performed cover the maximal time step, turbine stop valve position and mass flow, feedwater temperature, and steam bypass mass flow. Results of exercise 2, 3-D core neutronic and thermal-hydraulic model with boundary conditions, are also presented. Sensitivity studies include the core inlet temperature, cladding properties, and direct heating to core coolant and bypass.The entire plant model was validated in the framework of the benchmark's phase 3. Sensitivity studies include the effect of SCRAM initialization and carry-under. The results obtained - transient fission power and its initial axial distribution and steam dome, core exit, lower and upper plenum, main steam line, and turbine inlet pressures - showed good agreement with measured data. Thus, the POLCA-T code capabilities for correct simulation of pressurizing transients with very fast power were proved

TRACE/PARCS analysis of the OECD/NEA Oskarshamn-2 BWR stability benchmark

Energy Technology Data Exchange (ETDEWEB)

Kozlowski, T. [Univ. of Illinois, Urbana-Champaign, IL (United States); Downar, T.; Xu, Y.; Wysocki, A. [Univ. of Michigan, Ann Arbor, MI (United States); Ivanov, K.; Magedanz, J.; Hardgrove, M. [Pennsylvania State Univ., Univ. Park, PA (United States); March-Leuba, J. [Oak Ridge National Laboratory, Oak Ridge, TN (United States); Hudson, N.; Woodyatt, D. [Nuclear Regulatory Commission, Rockville, MD (United States)

2012-07-01

On February 25, 1999, the Oskarshamn-2 NPP experienced a stability event which culminated in diverging power oscillations with a decay ratio of about 1.4. The event was successfully modeled by the TRACE/PARCS coupled code system, and further analysis of the event is described in this paper. The results show very good agreement with the plant data, capturing the entire behavior of the transient including the onset of instability, growth of the oscillations (decay ratio) and oscillation frequency. This provides confidence in the prediction of other parameters which are not available from the plant records. The event provides coupled code validation for a challenging BWR stability event, which involves the accurate simulation of neutron kinetics (NK), thermal-hydraulics (TH), and TH/NK. coupling. The success of this work has demonstrated the ability of the 3-D coupled systems code TRACE/PARCS to capture the complex behavior of BWR stability events. The problem was released as an international OECD/NEA benchmark, and it is the first benchmark based on measured plant data for a stability event with a DR greater than one. Interested participants are invited to contact authors for more information. (authors)

Synthesis of the turbulent mixing in a rod bundle with vaned spacer grids based on the OECD-KAERI CFD benchmark exercise

International Nuclear Information System (INIS)

Lee, Jae Ryong; Kim, Jungwoo; Song, Chul-Hwa

2014-01-01

Highlights: • OECD/KAERI international CFD benchmark exercise was operated by KAERI. • The purpose is to validate relevant CFD codes based on the MATiS-H experiments. • Blind calculation results were synthesized in terms of mean velocity and RMS. • Quality of control volume rather than the number of it was emphasized. • Major findings were followed OECD/NEA CSNI report. - Abstract: The second international CFD benchmark exercise on turbulent mixing in a rod bundle has been launched by OECD/NEA, to validate relevant CFD (Computational Fluid Dynamics) codes and develop problem-specific Best Practice Guidelines (BPG) based on the KAERI (Korea Atomic Energy Research Institute) MATiS-H experiments on the turbulent mixing in a 5 × 5 rod array having two different types of vaned spacer grids: split and swirl types. For this 2nd international benchmark exercise (IBE-2), the MATiS-H testing provided a unique set of experimental data such as axial and lateral velocity components, turbulent intensity, and vorticity information. Blind CFD calculation results were submitted by twenty-five (25) participants to KAERI, who is the host organization of the IBE-2, and then analyzed and synthesized by comparing them with the MATiS-H data. Based on the synthesis of the results from both the experiments and blind CFD calculations for the IBE-2, and also by comparing with the IBE-1 benchmark exercise on the mixing in a T-junction, useful information for simulating this kind of complicated physical problem in a rod bundle was obtained. And some additional Best Practice Guidelines (BPG) are newly proposed. A summary of the synthesis results obtained in the IBE-2 is presented in this paper

Synthesis of the turbulent mixing in a rod bundle with vaned spacer grids based on the OECD-KAERI CFD benchmark exercise

Energy Technology Data Exchange (ETDEWEB)

Lee, Jae Ryong; Kim, Jungwoo; Song, Chul-Hwa, E-mail: chsong@kaeri.re.kr

2014-11-15

Highlights: • OECD/KAERI international CFD benchmark exercise was operated by KAERI. • The purpose is to validate relevant CFD codes based on the MATiS-H experiments. • Blind calculation results were synthesized in terms of mean velocity and RMS. • Quality of control volume rather than the number of it was emphasized. • Major findings were followed OECD/NEA CSNI report. - Abstract: The second international CFD benchmark exercise on turbulent mixing in a rod bundle has been launched by OECD/NEA, to validate relevant CFD (Computational Fluid Dynamics) codes and develop problem-specific Best Practice Guidelines (BPG) based on the KAERI (Korea Atomic Energy Research Institute) MATiS-H experiments on the turbulent mixing in a 5 × 5 rod array having two different types of vaned spacer grids: split and swirl types. For this 2nd international benchmark exercise (IBE-2), the MATiS-H testing provided a unique set of experimental data such as axial and lateral velocity components, turbulent intensity, and vorticity information. Blind CFD calculation results were submitted by twenty-five (25) participants to KAERI, who is the host organization of the IBE-2, and then analyzed and synthesized by comparing them with the MATiS-H data. Based on the synthesis of the results from both the experiments and blind CFD calculations for the IBE-2, and also by comparing with the IBE-1 benchmark exercise on the mixing in a T-junction, useful information for simulating this kind of complicated physical problem in a rod bundle was obtained. And some additional Best Practice Guidelines (BPG) are newly proposed. A summary of the synthesis results obtained in the IBE-2 is presented in this paper.

Preliminary Results for the OECD/NEA Time Dependent Benchmark using Rattlesnake, Rattlesnake-IQS and TDKENO

Energy Technology Data Exchange (ETDEWEB)

DeHart, Mark D. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Mausolff, Zander [Univ. of Florida, Gainesville, FL (United States); Weems, Zach [Univ. of Florida, Gainesville, FL (United States); Popp, Dustin [Univ. of Florida, Gainesville, FL (United States); Smith, Kristin [Univ. of Florida, Gainesville, FL (United States); Shriver, Forrest [Univ. of Florida, Gainesville, FL (United States); Goluoglu, Sedat [Univ. of Florida, Gainesville, FL (United States); Prince, Zachary [Texas A & M Univ., College Station, TX (United States); Ragusa, Jean [Texas A & M Univ., College Station, TX (United States)

2016-08-01

One goal of the MAMMOTH M&S project is to validate the analysis capabilities within MAMMOTH. Historical data has shown limited value for validation of full three-dimensional (3D) multi-physics methods. Initial analysis considered the TREAT startup minimum critical core and one of the startup transient tests. At present, validation is focusing on measurements taken during the M8CAL test calibration series. These exercises will valuable in preliminary assessment of the ability of MAMMOTH to perform coupled multi-physics calculations; calculations performed to date are being used to validate the neutron transport solver Rattlesnake\\cite{Rattlesnake} and the fuels performance code BISON. Other validation projects outside of TREAT are available for single-physics benchmarking. Because the transient solution capability of Rattlesnake is one of the key attributes that makes it unique for TREAT transient simulations, validation of the transient solution of Rattlesnake using other time dependent kinetics benchmarks has considerable value. The Nuclear Energy Agency (NEA) of the Organization for Economic Cooperation and Development (OECD) has recently developed a computational benchmark for transient simulations. This benchmark considered both two-dimensional (2D) and 3D configurations for a total number of 26 different transients. All are negative reactivity insertions, typically returning to the critical state after some time.

Preliminary Results for the OECD/NEA Time Dependent Benchmark using Rattlesnake, Rattlesnake-IQS and TDKENO

International Nuclear Information System (INIS)

DeHart, Mark D.; Mausolff, Zander; Weems, Zach; Popp, Dustin; Smith, Kristin; Shriver, Forrest; Goluoglu, Sedat; Prince, Zachary; Ragusa, Jean

2016-01-01

One goal of the MAMMOTH M&S project is to validate the analysis capabilities within MAMMOTH. Historical data has shown limited value for validation of full three-dimensional (3D) multi-physics methods. Initial analysis considered the TREAT startup minimum critical core and one of the startup transient tests. At present, validation is focusing on measurements taken during the M8CAL test calibration series. These exercises will valuable in preliminary assessment of the ability of MAMMOTH to perform coupled multi-physics calculations; calculations performed to date are being used to validate the neutron transport solver Rattlesnake\\citelesnake) and the fuels performance code BISON. Other validation projects outside of TREAT are available for single-physics benchmarking. Because the transient solution capability of Rattlesnake is one of the key attributes that makes it unique for TREAT transient simulations, validation of the transient solution of Rattlesnake using other time dependent kinetics benchmarks has considerable value. The Nuclear Energy Agency (NEA) of the Organization for Economic Cooperation and Development (OECD) has recently developed a computational benchmark for transient simulations. This benchmark considered both two-dimensional (2D) and 3D configurations for a total number of 26 different transients. All are negative reactivity insertions, typically returning to the critical state after some time.

TRACE/PARCS validation for BWR stability based on OECD/NEA Oskarshamn-2 benchmark

International Nuclear Information System (INIS)

Kozlowski, T.; Roshan, S.; Lefvert, T.; Downar, T.; Xu, Y.; Wysocki, A.; Ivanov, K.; Magedanz, J.; Hardgrove, M.; Netterbrant, C.; March-Leuba, J.; Hudson, N.; Sandervag, O.; Bergman, A.

2011-01-01

On February 25, 1999, the Oskarshamn-2 NPP experienced a stability event, which culminated in diverging power oscillations with decay ratio greater than 1.3. The event was successfully modeled by TRACE/PARCS coupled code system and the details of the modeling and solution are described in the paper. The obtained results show excellent agreement with the plant data, capturing the entire behavior of the transient including onset of instability, growth of oscillation (decay ratio) and the oscillation frequency. The event allows coupled code validation for BWR with a real, challenging stability event, which challenges accuracy of neutron kinetics (NK), thermal-hydraulics (TH) and TH/NK coupling. The success of this work has demonstrated the ability of 3-D coupled code systems to capture the complex behavior of BWR stability events. The problem is released as an international OECD/NEA benchmark, and it is the first benchmark based on measured plant data for a stability event with a DR greater than one. Interested participants are invited to contact authors for more information. (author)

OECD/DOE/CEA VVER-1000 Coolant Transient Benchmark. Summary Record of the First Workshop (V1000-CT1)

International Nuclear Information System (INIS)

2003-01-01

The first workshop for the VVER-1000 Coolant Transient Benchmark TT Benchmark was hosted by the Commissariat a l'Energie Atomique, Centre d'Etudes de Saclay, France. The V1000CT benchmark defines standard problems for validation of coupled three-dimensional (3-D) neutron-kinetics/system thermal-hydraulics codes for application to Soviet-designed VVER-1000 reactors using actual plant data without any scaling. The overall objective is to access computer codes used in the safety analysis of VVER power plants, specifically for their use in reactivity transient simulations in a VVER-1000. The V1000CT benchmark consists of two phases: V1000CT-1 - simulation of the switching on of one main coolant pump (MCP) while the other three MCP are in operation, and V1000CT- 2 - calculation of coolant mixing tests and Main Steam Line Break (MSLB) scenario. Further background information on this benchmark can be found at the OECD/NEA benchmark web site . The purpose of the first workshop was to review the benchmark activities after the Starter Meeting held last year in Dresden, Germany: to discuss the participants' feedback and modifications introduced in the Benchmark Specifications on Phase 1; to present and to discuss modelling issues and preliminary results from the three exercises of Phase 1; to discuss the modelling issues of Exercise 1 of Phase 2; and to define work plan and schedule in order to complete the two phases

IRIS-2012 OECD/NEA/CSNI benchmark: Numerical simulations of structural impact

International Nuclear Information System (INIS)

Orbovic, Nebojsa; Tarallo, Francois; Rambach, Jean-Mathieu; Sagals, Genadijs; Blahoianu, Andrei

2015-01-01

A benchmark of numerical simulations related to the missile impact on reinforced concrete (RC) slabs has been launched in the frame of OECD/NEA/CSNI research program “Improving Robustness Assessment Methodologies for Structures Impacted by Missiles”, under the acronym IRIS. The goal of the research program is to simulate RC structural, flexural and punching, behavior under deformable and rigid missile impact. The first phase called IRIS-2010 was a blind prediction of the tests performed at VTT facility in Espoo, Finland. The two simulations were performed related to two series of tests: (1) two tests on the impact of a deformable missile exhibiting damage mainly by flexural (so-called “flexural tests”) or global response and (2) three tests on the impact of a rigid missile exhibiting damage mainly by punching response (so-called “punching tests”) or local response. The simulation results showed significant scatter (coefficient of variation up to 132%) for both flexural and punching cases. The IRIS-2012 is the second, post-test, phase of the benchmark with the goal to improve simulations and reduce the scatter of the results. Based on the IRIS-2010 recommendations and to better calibrate concrete constitutive models, a series of tri-axial tests as well as Brazilian tests were performed as a part of the IRIS-2012 benchmark. 25 teams from 11 countries took part in this exercise. Majority of participants were part of the IRIS-2010 benchmark. Participants showed significant improvement in reducing epistemic uncertainties in impact simulations. Several teams presented both finite element (FE) and simplified analysis as per recommendations of the IRIS-2010. The improvements were at the level of simulation results but also at the level of understanding of impact phenomena and its modeling. Due to the complexity of the physical phenomena and its simulation (high geometric and material non-linear behavior) and inherent epistemic and aleatory uncertainties, the

IRIS-2012 OECD/NEA/CSNI benchmark: Numerical simulations of structural impact

Energy Technology Data Exchange (ETDEWEB)

Orbovic, Nebojsa, E-mail: nebojsa.orbovic@cnsc-ccsn.gc.ca [Canadian Nuclear Safety Commission, Ottawa, ON (Canada); Tarallo, Francois [IRSN, Fontenay aux Roses (France); Rambach, Jean-Mathieu [Géodynamique et Structures, Bagneux (France); Sagals, Genadijs; Blahoianu, Andrei [Canadian Nuclear Safety Commission, Ottawa, ON (Canada)

2015-12-15

A benchmark of numerical simulations related to the missile impact on reinforced concrete (RC) slabs has been launched in the frame of OECD/NEA/CSNI research program “Improving Robustness Assessment Methodologies for Structures Impacted by Missiles”, under the acronym IRIS. The goal of the research program is to simulate RC structural, flexural and punching, behavior under deformable and rigid missile impact. The first phase called IRIS-2010 was a blind prediction of the tests performed at VTT facility in Espoo, Finland. The two simulations were performed related to two series of tests: (1) two tests on the impact of a deformable missile exhibiting damage mainly by flexural (so-called “flexural tests”) or global response and (2) three tests on the impact of a rigid missile exhibiting damage mainly by punching response (so-called “punching tests”) or local response. The simulation results showed significant scatter (coefficient of variation up to 132%) for both flexural and punching cases. The IRIS-2012 is the second, post-test, phase of the benchmark with the goal to improve simulations and reduce the scatter of the results. Based on the IRIS-2010 recommendations and to better calibrate concrete constitutive models, a series of tri-axial tests as well as Brazilian tests were performed as a part of the IRIS-2012 benchmark. 25 teams from 11 countries took part in this exercise. Majority of participants were part of the IRIS-2010 benchmark. Participants showed significant improvement in reducing epistemic uncertainties in impact simulations. Several teams presented both finite element (FE) and simplified analysis as per recommendations of the IRIS-2010. The improvements were at the level of simulation results but also at the level of understanding of impact phenomena and its modeling. Due to the complexity of the physical phenomena and its simulation (high geometric and material non-linear behavior) and inherent epistemic and aleatory uncertainties, the

Application of the Relap5-3D to phase 1 and 3 of the OECD-CSNI/NSC PWR MSLB benchmark related to TMI-1

International Nuclear Information System (INIS)

D'Auria, F.; Galassi, G.; Spadoni, A.; Hassan, Y.

2001-01-01

The Relap5-3D, the latest in the series of the Relap5 code, distinguishes from the previous versions by the fully integrated, multi-dimensional thermalhydraulic and kinetic modeling capability. It has been applied to Phase I and III of OECD-CSNI/ NSC PWR MSLB Benchmark adopting the same thermalhydraulic input deck already used with Relap5/Parcs and Relap5/Quabbox coupled codes during the previous MSLB analysis. The OECD jointly with the US NRC proposed the PWR MSLB Benchmark in order to gather a common understanding about the coupling between thermal hydraulics and neutronics, and evaluating the behavior of this transient with different coupled codes, giving emphasis to the 3-D modeling. This paper deals with the application of Relap5-3D code to phase I and III of the PWR MSLB Benchmark. The Relap5-3D is a thermal hydraulics-neutronics internally coupled code, the thermal hydraulics module is the INEEL version of Relap and the neutronics module is derived from NESTLE multi-dimension kinetics code. (author)

Et benchmark studie af menneskelige ressourcer på tværs af OECD-landene

DEFF Research Database (Denmark)

Klynge, Alice Heegaard; Riis, Annemarie Munk

and Finland make up the top 3 in terms of human resources. The three countries significantly outperform all other countries. At the same time the United States, Sweden and Finland have excellent framework conditions. Denmark’s performance in terms of human resources and the quality of framework conditions...... approach compared to other benchmarking methods. The FORA/OECD approach not only shows how countries perform in a specific area, it also tests the link between framework conditions and performance in the area of human resources. Based on available data the analysis shows that the United States, Sweden...... is solid. However, it will take an additional effort to bring Denmark in line with the top-performing countries....

Activities of the AZTLAN team on the OECD/Nea benchmark on fast reactors

Energy Technology Data Exchange (ETDEWEB)

Lopez S, R.; Gomez T, A.; Puente E, F. [ININ, Carretera Mexico-Toluca s/n, Ocoyoacac, Estado de Mexico (Mexico); Del Valle G, E.; Arriaga R, L., E-mail: armando.gomez@inin.gob.mx [IPN, Escuela Superior de Fisica y Matematicas, Av. IPN s/n, 07738 Ciudad de Mexico (Mexico)

2017-09-15

In the present paper, the activities of the AZTLAN Platform Fast Reactor Group on the OECD/Nea Benchmark will be described. The main objective of these activities is to test the group staff and capabilities as well as the domestic code reliability by putting them into test in this exercise with different institutions from around the world. Six different core configurations were treated; these are described in two different versions of the Benchmark document. The main tools used by the group were the Finnish stochastic Monte Carlo code Serpent for full core calculations and macroscopic Cross Sections (X S) generation, and the domestic deterministic code AZNHEX for full core calculations. Different calculations were performed, such as full core calculations under nominal conditions, with control rods fully and partially inserted and with the sodium voided in the active zone as well as different reactivity shift values due to various conditions of radial and axial expansion of the fuel elements and structural material. The results obtained in the full core calculations and most of the reactivity shift calculations obtained by our group were indeed comparable to the ones obtained by different institutions when using similar methodologies. Given these favorable results it can be said that the main objective was met and the group showed their capabilities, as well as its possibility to collaborate with other institutes, placing Mexico in a good position in fast reactor analysis. Future work will continue with the calculations not yet treated and with the new core specifications on the new versions of the Benchmark document. (Author)

OECD/NEA Sandia Fuel Project phase I: Benchmark of the ignition testing

Energy Technology Data Exchange (ETDEWEB)

Adorni, Martina, E-mail: martina_adorni@hotmail.it [UNIPI (Italy); Herranz, Luis E. [CIEMAT (Spain); Hollands, Thorsten [GRS (Germany); Ahn, Kwang-II [KAERI (Korea, Republic of); Bals, Christine [GRS (Germany); D' Auria, Francesco [UNIPI (Italy); Horvath, Gabor L. [NUBIKI (Hungary); Jaeckel, Bernd S. [PSI (Switzerland); Kim, Han-Chul; Lee, Jung-Jae [KINS (Korea, Republic of); Ogino, Masao [JNES (Japan); Techy, Zsolt [NUBIKI (Hungary); Velazquez-Lozad, Alexander; Zigh, Abdelghani [USNRC (United States); Rehacek, Radomir [OECD/NEA (France)

2016-10-15

Highlights: • A unique PWR spent fuel pool experimental project is analytically investigated. • Predictability of fuel clad ignition in case of a complete loss of coolant in SFPs is assessed. • Computer codes reasonably estimate peak cladding temperature and time of ignition. - Abstract: The OECD/NEA Sandia Fuel Project provided unique thermal-hydraulic experimental data associated with Spent Fuel Pool (SFP) complete drain down. The study conducted at Sandia National Laboratories (SNL) was successfully completed (July 2009 to February 2013). The accident conditions of interest for the SFP were simulated in a full scale prototypic fashion (electrically heated, prototypic assemblies in a prototypic SFP rack) so that the experimental results closely represent actual fuel assembly responses. A major impetus for this work was to facilitate severe accident code validation and to reduce modeling uncertainties within the codes. Phase I focused on axial heating and burn propagation in a single PWR 17 × 17 assembly (i.e. “hot neighbors” configuration). Phase II addressed axial and radial heating and zirconium fire propagation including effects of fuel rod ballooning in a 1 × 4 assembly configuration (i.e. single, hot center assembly and four, “cooler neighbors”). This paper summarizes the comparative analysis regarding the final destructive ignition test of the phase I of the project. The objective of the benchmark is to evaluate and compare the predictive capabilities of computer codes concerning the ignition testing of PWR fuel assemblies. Nine institutions from eight different countries were involved in the benchmark calculations. The time to ignition and the maximum temperature are adequately captured by the calculations. It is believed that the benchmark constitutes an enlargement of the validation range for the codes to the conditions tested, thus enhancing the code applicability to other fuel assembly designs and configurations. The comparison of

DORT-TD/THERMIX solutions for the OECD/NEA/NSC PBMR400 MW coupled neutronics thermal hydraulics transient benchmark

International Nuclear Information System (INIS)

Tyobeka, Bismark; Pautz, Andreas; Ivanov, Kostadin

2008-01-01

In new reactor designs that are still under review such as the PBMR, not much experimental data exists to benchmark newly developed computer codes against. Such a situation requires that nuclear engineers and designers of this novel reactor design must resort to the validation of a newly developed code through a code-to-code benchmarking exercise because there are validated codes that are currently in use to analyze this reactor design, albeit very few of them. There are numerous HTR core physics benchmarks that are currently being pursued by different organizations, for different purposes. One such benchmark exercise is the PBMR-400 MW OECD/NEA/NSC coupled neutronics/thermal hydraulics transient benchmark. In this paper, a newly developed coupled neutronics thermal hydraulics code system, DORT-TD/THERMIX with both transport and diffusion theory options, is used to simulate the transient scenarios in the above-mentioned benchmark problem. Steady-state calculations results are compared with selected participants' results as well as transient models in which the diffusion and transport theory solutions of the same code system are directly compared. Several sensitivity studies are also shown in order to determine how much the change in certain parameters influences the overall behaviour of a given transient. It is shown in this paper that DORT-TD/THERMIX is a versatile tool which can be deployed for design and safety analyses of high temperature reactors of pebble-bed type. (authors)

OECD/NEA BENCHMARK FOR UNCERTAINTY ANALYSIS IN MODELING (UAM FOR LWRS – SUMMARY AND DISCUSSION OF NEUTRONICS CASES (PHASE I

Directory of Open Access Journals (Sweden)

RYAN N. BRATTON

2014-06-01

Full Text Available A Nuclear Energy Agency (NEA, Organization for Economic Co-operation and Development (OECD benchmark for Uncertainty Analysis in Modeling (UAM is defined in order to facilitate the development and validation of available uncertainty analysis and sensitivity analysis methods for best-estimate Light water Reactor (LWR design and safety calculations. The benchmark has been named the OECD/NEA UAM-LWR benchmark, and has been divided into three phases each of which focuses on a different portion of the uncertainty propagation in LWR multi-physics and multi-scale analysis. Several different reactor cases are modeled at various phases of a reactor calculation. This paper discusses Phase I, known as the “Neutronics Phase”, which is devoted mostly to the propagation of nuclear data (cross-section uncertainty throughout steady-state stand-alone neutronics core calculations. Three reactor systems (for which design, operation and measured data are available are rigorously studied in this benchmark: Peach Bottom Unit 2 BWR, Three Mile Island Unit 1 PWR, and VVER-1000 Kozloduy-6/Kalinin-3. Additional measured data is analyzed such as the KRITZ LEU criticality experiments and the SNEAK-7A and 7B experiments of the Karlsruhe Fast Critical Facility. Analyzed results include the top five neutron-nuclide reactions, which contribute the most to the prediction uncertainty in keff, as well as the uncertainty in key parameters of neutronics analysis such as microscopic and macroscopic cross-sections, six-group decay constants, assembly discontinuity factors, and axial and radial core power distributions. Conclusions are drawn regarding where further studies should be done to reduce uncertainties in key nuclide reaction uncertainties (i.e.: 238U radiative capture and inelastic scattering (n, n’ as well as the average number of neutrons released per fission event of 239Pu.

Homochirality as the signature of life: the SETH Cigar

Science.gov (United States)

MacDermott, A. J.; Barron, L. D.; Brack, A.; Buhse, T.; Drake, A. F.; Emery, R.; Gottarelli, G.; Greenberg, J. M.; Haberle, R.; Hegstrom, R. A.; Hobbs, K.; Kondepudi, D. K.; McKay, C.; Moorbath, S.; Raulin, F.; Sandford, M.; Schwartzman, D. W.; Thiemann, W. H.-P.; Tranter, G. E.; Zarnecki, J. C.

1996-11-01

A characteristic hallmark of life is its homochirality; all biomolecules are usually of one hand, e.g. on Earth life uses only L-amino acids for protein synthesis and not their D mirror images. It is therefore suggested that a search for extra-terrestrial life can be approached as a Search for Extra-Terrestrial Homochirality (SETH). A novel miniaturized space polarimeter, called the SETH Cigar, is described which could be used to detect optical rotation as the homochiral signature of life on other planets. Moving parts are avoided by replacing the normal rotating polarizer by multiple fixed polarizers at different angles as in the eye of the bee. It is believed that homochirality will be found in the subsurface layers on Mars as a relic of extinct life.

The coupled code system DORT-TD/THERMIX and its application to the OECD/NEA/NSC PBMR400 MW coupled neutronics thermal hydraulics transient benchmark

International Nuclear Information System (INIS)

Pautz, A.; Tyobeka, B.; Ivanov, K.

2009-01-01

In new reactor designs that are still under review such as the Pebble Bed Modular Reactor (PBMR), not much experimental data exists to benchmark newly developed computer codes against. Such a situation requires that nuclear engineers and designers of this novel reactor design must resort to the validation of a newly developed code through a code-to-code benchmarking exercise because there are validated codes that are currently in use to analyze this reactor design, albeit very few of them. There are numerous HTR core physics benchmarks that are currently being pursued by different organizations, for different purposes. One such benchmark exercise is the PBMR-400MW OECD/NEA coupled neutronics/thermal hydraulics transient benchmark. In this paper, a newly developed coupled neutronics thermal hydraulics code system, DORT-TD/THERMIX with both transport and diffusion theory options, is used to simulate both the steady-state as well as several transient scenarios in this benchmark problem. (orig.)

Classification of criticality calculations with correlation coefficient method and its application to OECD/NEA burnup credit benchmarks phase III-A and II-A

International Nuclear Information System (INIS)

Okuno, Hiroshi

2003-01-01

A method for classifying benchmark results of criticality calculations according to similarity was proposed in this paper. After formulation of the method utilizing correlation coefficients, it was applied to burnup credit criticality benchmarks Phase III-A and II-A, which were conducted by the Expert Group on Burnup Credit Criticality Safety under auspices of the Nuclear Energy Agency of the Organisation for Economic Cooperation and Development (OECD/NEA). Phase III-A benchmark was a series of criticality calculations for irradiated Boiling Water Reactor (BWR) fuel assemblies, whereas Phase II-A benchmark was a suite of criticality calculations for irradiated Pressurized Water Reactor (PWR) fuel pins. These benchmark problems and their results were summarized. The correlation coefficients were calculated and sets of benchmark calculation results were classified according to the criterion that the values of the correlation coefficients were no less than 0.15 for Phase III-A and 0.10 for Phase II-A benchmarks. When a couple of benchmark calculation results belonged to the same group, one calculation result was found predictable from the other. An example was shown for each of the Benchmarks. While the evaluated nuclear data seemed the main factor for the classification, further investigations were required for finding other factors. (author)

The University of Pisa calculations for the Phase I of the OECD/NEA UAM Benchmark

International Nuclear Information System (INIS)

Ball, M.; Parisi, C.; D'Auria, F.

2009-01-01

In this paper we present the Univ. of Pisa preliminary results for the first exercise of the Phase I of the OECD/NEA Benchmark on the Uncertainty in Analysis and Modeling. The scope of exercise one is to address the uncertainties due to the basic nuclear data as well as the impact of processing the nuclear and covariance data, selection of multi-group structure and self-shielding treatment. DRAGON code and TSUNAMI code were employed, using the available covariance data matrix. The execution of DRAGON calculations required the use of ANGELO and LAMBDA codes for the extension of the covariance matrix from the original SCALE 44 group structure to DRAGON 69 group structure. The uncertainties for the main cross sections were evaluated and are presented here. (authors)

Uncertainty and sensitivity analysis in reactivity-initiated accident fuel modeling: synthesis of organisation for economic co-operation and development (OECD/nuclear energy agency (NEA benchmark on reactivity-initiated accident codes phase-II

Directory of Open Access Journals (Sweden)

Olivier Marchand

2018-03-01

Full Text Available In the framework of OECD/NEA Working Group on Fuel Safety, a RIA fuel-rod-code Benchmark Phase I was organized in 2010–2013. It consisted of four experiments on highly irradiated fuel rodlets tested under different experimental conditions. This benchmark revealed the need to better understand the basic models incorporated in each code for realistic simulation of the complicated integral RIA tests with high burnup fuel rods. A second phase of the benchmark (Phase II was thus launched early in 2014, which has been organized in two complementary activities: (1 comparison of the results of different simulations on simplified cases in order to provide additional bases for understanding the differences in modelling of the concerned phenomena; (2 assessment of the uncertainty of the results. The present paper provides a summary and conclusions of the second activity of the Benchmark Phase II, which is based on the input uncertainty propagation methodology. The main conclusion is that uncertainties cannot fully explain the difference between the code predictions. Finally, based on the RIA benchmark Phase-I and Phase-II conclusions, some recommendations are made. Keywords: RIA, Codes Benchmarking, Fuel Modelling, OECD

Scale resolved simulations of the OECD/NEA–Vattenfall T-junction benchmark

Energy Technology Data Exchange (ETDEWEB)

Höhne, Thomas, E-mail: t.hoehne@hzdr.de

2014-04-01

Mixing of fluids in T-junction geometries is of significant interest for nuclear safety research. The most prominent example is the thermal striping phenomena in piping T-junctions, where hot and cold streams join and turbulently mix, however not completely or not immediately at the T-junction. This result in significant temperature fluctuations near the piping wall, either at the side of the secondary pipe branch or at the opposite side of the main branch pipe. The wall temperature fluctuation can cause cyclical thermal stresses and subsequently fatigue cracking of the wall. Thermal mixing in a T-junction has been studied for validation of CFD-calculations. A T-junction thermal mixing test was carried out at the Älvkarleby Laboratory of Vattenfall Research and Development (VRD) in Sweden. Data from this test have been reserved specifically for a OECD CFD benchmark exercise. The computational results show that RANS fail to predict a realistic mixing between the fluids. The results were significantly better with scale-resolving methods such as LES, showing fairly good predictions of the velocity field and mean temperatures. The calculation predicts also similar fluctuations and frequencies observed in the model test.

New Multi-group Transport Neutronics (PHISICS) Capabilities for RELAP5-3D and its Application to Phase I of the OECD/NEA MHTGR-350 MW Benchmark

Energy Technology Data Exchange (ETDEWEB)

Gerhard Strydom; Cristian Rabiti; Andrea Alfonsi

2012-10-01

PHISICS is a neutronics code system currently under development at the Idaho National Laboratory (INL). Its goal is to provide state of the art simulation capability to reactor designers. The different modules for PHISICS currently under development are a nodal and semi-structured transport core solver (INSTANT), a depletion module (MRTAU) and a cross section interpolation (MIXER) module. The INSTANT module is the most developed of the mentioned above. Basic functionalities are ready to use, but the code is still in continuous development to extend its capabilities. This paper reports on the effort of coupling the nodal kinetics code package PHISICS (INSTANT/MRTAU/MIXER) to the thermal hydraulics system code RELAP5-3D, to enable full core and system modeling. This will enable the possibility to model coupled (thermal-hydraulics and neutronics) problems with more options for 3D neutron kinetics, compared to the existing diffusion theory neutron kinetics module in RELAP5-3D (NESTLE). In the second part of the paper, an overview of the OECD/NEA MHTGR-350 MW benchmark is given. This benchmark has been approved by the OECD, and is based on the General Atomics 350 MW Modular High Temperature Gas Reactor (MHTGR) design. The benchmark includes coupled neutronics thermal hydraulics exercises that require more capabilities than RELAP5-3D with NESTLE offers. Therefore, the MHTGR benchmark makes extensive use of the new PHISICS/RELAP5-3D coupling capabilities. The paper presents the preliminary results of the three steady state exercises specified in Phase I of the benchmark using PHISICS/RELAP5-3D.

Assessment of the uncertainties of COBRA sub-channel calculations by using a PWR type rod bundle and the OECD NEA UAM and the PSBT benchmarks data

International Nuclear Information System (INIS)

Panka, I.; Kereszturi, A.

2014-01-01

The assessment of the uncertainties of COBRA-IIIC thermal-hydraulic analyses of rod bundles is performed for a 5-by-5 bundle representing a PWR fuel assembly. In the first part of the paper the modeling uncertainties are evaluated in the term of the uncertainty of the turbulent mixing factor using the OECD NEA/NRC PSBT benchmark data. After that the uncertainties of the COBRA calculations are discussed performing Monte-Carlo type statistical analyses taking into account the modeling uncertainties and other uncertainties prescribed in the OECD NEA UAM benchmark specification. Both steady-state and transient cases are investigated. The target quantities are the uncertainties of the void distribution, the moderator density, the moderator temperature and the DNBR. We will see that - beyond the uncertainties of the geometry and the boundary conditions - it is very important to take into account the modeling uncertainties in case of bundle or sub-channel thermo-hydraulic calculations.

Summary of the OECD/NRC Boiling Water Reactor Turbine Trip Benchmark - Fifth Workshop (BWR-TT5)

International Nuclear Information System (INIS)

2003-01-01

-estimate and extreme scenarios) of the benchmark and to finalize the content and format of the Final Benchmark Comparative Analysis reports on each benchmark exercise to be published next year both as OECD/NEA and US NRC NUREG documents. Participants in the benchmark were invited to make presentations on their experience in analyzing BWR TT transients and to provide conclusions and recommendations based on the work carried out

OECD/NEA expert group on uncertainty analysis for criticality safety assessment: Results of benchmark on sensitivity calculation (phase III)

Energy Technology Data Exchange (ETDEWEB)

Ivanova, T.; Laville, C. [Institut de Radioprotection et de Surete Nucleaire IRSN, BP 17, 92262 Fontenay aux Roses (France); Dyrda, J. [Atomic Weapons Establishment AWE, Aldermaston, Reading, RG7 4PR (United Kingdom); Mennerdahl, D. [E Mennerdahl Systems EMS, Starvaegen 12, 18357 Taeby (Sweden); Golovko, Y.; Raskach, K.; Tsiboulia, A. [Inst. for Physics and Power Engineering IPPE, 1, Bondarenko sq., 249033 Obninsk (Russian Federation); Lee, G. S.; Woo, S. W. [Korea Inst. of Nuclear Safety KINS, 62 Gwahak-ro, Yuseong-gu, Daejeon 305-338 (Korea, Republic of); Bidaud, A.; Sabouri, P. [Laboratoire de Physique Subatomique et de Cosmologie LPSC, CNRS-IN2P3/UJF/INPG, Grenoble (France); Patel, A. [U.S. Nuclear Regulatory Commission (NRC), Washington, DC 20555-0001 (United States); Bledsoe, K.; Rearden, B. [Oak Ridge National Laboratory ORNL, M.S. 6170, P.O. Box 2008, Oak Ridge, TN 37831 (United States); Gulliford, J.; Michel-Sendis, F. [OECD/NEA, 12, Bd des Iles, 92130 Issy-les-Moulineaux (France)

2012-07-01

The sensitivities of the k{sub eff} eigenvalue to neutron cross sections have become commonly used in similarity studies and as part of the validation algorithm for criticality safety assessments. To test calculations of the sensitivity coefficients, a benchmark study (Phase III) has been established by the OECD-NEA/WPNCS/EG UACSA (Expert Group on Uncertainty Analysis for Criticality Safety Assessment). This paper presents some sensitivity results generated by the benchmark participants using various computational tools based upon different computational methods: SCALE/TSUNAMI-3D and -1D, MONK, APOLLO2-MORET 5, DRAGON-SUSD3D and MMKKENO. The study demonstrates the performance of the tools. It also illustrates how model simplifications impact the sensitivity results and demonstrates the importance of 'implicit' (self-shielding) sensitivities. This work has been a useful step towards verification of the existing and developed sensitivity analysis methods. (authors)

OECD/NEA burnup credit criticality benchmarks phase IIIA: Criticality calculations of BWR spent fuel assemblies in storage and transport

Energy Technology Data Exchange (ETDEWEB)

Okuno, Hiroshi; Naito, Yoshitaka [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Ando, Yoshihira [Toshiba Corp., Kawasaki, Kanagawa (Japan)

2000-09-01

The report describes the final results of Phase IIIA Benchmarks conducted by the Burnup Credit Criticality Calculation Working Group under the auspices of the Nuclear Energy Agency of the Organization for Economic Cooperation and Development (OECD/NEA). The benchmarks are intended to confirm the predictive capability of the current computer code and data library combinations for the neutron multiplication factor (k{sub eff}) of a layer of irradiated BWR fuel assembly array model. In total 22 benchmark problems are proposed for calculations of k{sub eff}. The effects of following parameters are investigated: cooling time, inclusion/exclusion of FP nuclides and axial burnup profile, and inclusion of axial profile of void fraction or constant void fractions during burnup. Axial profiles of fractional fission rates are further requested for five cases out of the 22 problems. Twenty-one sets of results are presented, contributed by 17 institutes from 9 countries. The relative dispersion of k{sub eff} values calculated by the participants from the mean value is almost within the band of {+-}1%{delta}k/k. The deviations from the averaged calculated fission rate profiles are found to be within {+-}5% for most cases. (author)

OECD/DOE/CEA VVER-1000 coolant transient (V1000CT) benchmark for assessing coupled neutronics/thermal-hydraulics system codes for VVER-1000 RIA analysis

International Nuclear Information System (INIS)

Ivanov, B.; Ivanov, K.; Aniel, S.; Royer, E.; Kolev, N.; Groudev, P.

2004-01-01

The present paper describes the two phases of the OECD/DOE/CEA VVER-1000 coolant transient benchmark labeled as V1000CT. This benchmark is based on a data from the Bulgarian Kozloduy NPP Unit 6. The first phase of the benchmark was designed for the purpose of assessing neutron kinetics and thermal-hydraulic modeling for a VVER-1000 reactor, and specifically for their use in analyzing reactivity transients in a VVER-1000 reactor. Most of the results of Phase 1 will be compared against experimental data and the rest of the results will be used for code-to-code comparison. The second phase of the benchmark is planned for evaluation and improvement of the mixing computational models. Code-to-code and code-to-data comparisons will be done based on data of a mixing experiment conducted at Kozloduy-6. Main steam line break will be also analyzed in the second phase of the V1000CT benchmark. The results from it will be used for code-to-code comparison. The benchmark team has been involved in analyzing different aspects and performing sensitivity studies of the different benchmark exercises. The paper presents a comparison of selected results, obtained with two different system thermal-hydraulics codes, with the plant data for the Exercise 1 of Phase 1 of the benchmark as well as some results for Exercises 2 and 3. Overall, this benchmark has been well accepted internationally, with many organizations representing 11 countries participating in the first phase of the benchmark. (authors)

Comparative analysis of exercise 2 results of the OECD WWER-1000 MSLB benchmark

International Nuclear Information System (INIS)

Kolev, N.; Petrov, N.; Royer, E.; Ivanov, B.; Ivanov, K.

2006-01-01

In the framework of joint effort between OECD/NEA, US DOE and CEA France a coupled three-dimensional (3D) thermal-hydraulic/neutron kinetics benchmark for WWER-1000 was defined. Phase 2 of this benchmark is labeled W1000CT-2 and consists of calculation of a vessel mixing experiment and main steam line break (MSLB) transients. The reference plant is Kozloduy-6 in Bulgaria. Plant data are available for code validation consisting of one experiment of pump start-up (W1000CT-1) and one experiment of steam generator isolation (W1000CT-2). The validated codes can be used to calculate asymmetric MSLB transients involving similar mixing patterns. This paper summarizes a comparison of the available results for W1000CT-2 Exercise 2 devoted to core-vessel calculation with imposed MSLB vessel boundary conditions. Because of the recent re-calculation of the cross-section libraries, core physics results from PARCS and CRONOS codes could be compared only. The comparison is code-to-code (including BIPR7A/TVS-M lib) and code vs. plant measured data in a steady state close to the MSLB initial state. The results provide a test of the cross-section libraries and show a good agreement of plant measured and computed data. The comparison of full vessel calculations was made from the point of view of vessel mixing, considering mainly the coarse-mesh features of the flow. The FZR and INRNE results from multi-1D calculations with different mixing models are similar, while the FZK calculations with a coarse-3D vessel model show deviations from the others. These deviations seem to be due to an error in the use of a boundary condition after flow reversal (Authors)

RELAP5-3D Results for Phase I (Exercise 2) of the OECD/NEA MHTGR-350 MW Benchmark

Energy Technology Data Exchange (ETDEWEB)

Gerhard Strydom

2012-06-01

The coupling of the PHISICS code suite to the thermal hydraulics system code RELAP5-3D has recently been initiated at the Idaho National Laboratory (INL) to provide a fully coupled prismatic Very High Temperature Reactor (VHTR) system modeling capability as part of the NGNP methods development program. The PHISICS code consists of three modules: INSTANT (performing 3D nodal transport core calculations), MRTAU (depletion and decay heat generation) and a perturbation/mixer module. As part of the verification and validation activities, steady state results have been obtained for Exercise 2 of Phase I of the newly-defined OECD/NEA MHTGR-350 MW Benchmark. This exercise requires participants to calculate a steady-state solution for an End of Equilibrium Cycle 350 MW Modular High Temperature Reactor (MHTGR), using the provided geometry, material, and coolant bypass flow description. The paper provides an overview of the MHTGR Benchmark and presents typical steady state results (e.g. solid and gas temperatures, thermal conductivities) for Phase I Exercise 2. Preliminary results are also provided for the early test phase of Exercise 3 using a two-group cross-section library and the Relap5-3D model developed for Exercise 2.

The International Criticality Safety Benchmark Evaluation Project (ICSBEP)

International Nuclear Information System (INIS)

Briggs, J.B.

2003-01-01

The International Criticality Safety Benchmark Evaluation Project (ICSBEP) was initiated in 1992 by the United States Department of Energy. The ICSBEP became an official activity of the Organisation for Economic Cooperation and Development (OECD) - Nuclear Energy Agency (NEA) in 1995. Representatives from the United States, United Kingdom, France, Japan, the Russian Federation, Hungary, Republic of Korea, Slovenia, Yugoslavia, Kazakhstan, Israel, Spain, and Brazil are now participating. The purpose of the ICSBEP is to identify, evaluate, verify, and formally document a comprehensive and internationally peer-reviewed set of criticality safety benchmark data. The work of the ICSBEP is published as an OECD handbook entitled 'International Handbook of Evaluated Criticality Safety Benchmark Experiments.' The 2003 Edition of the Handbook contains benchmark model specifications for 3070 critical or subcritical configurations that are intended for validating computer codes that calculate effective neutron multiplication and for testing basic nuclear data. (author)

SETH: A Hierarchical, Agent-based Architecture for Smart Spaces

OpenAIRE

Marsá Maestre, Iván

2008-01-01

The ultimate goal of any smart environment is to release users from the tasks they usually perform to achieve comfort, efficiency, and service personalization. To achieve this goal, we propose to use multiagent systems. In this report we describe the SETH architectur: a hierarchical, agent-based solution intended to be applicable to different smart space scenarios, ranging from small environments, like smart homes or smart offices, to large smart spaces like cities.

Preliminary uncertainty analysis of OECD/UAM benchmark for the TMI-1 reactor

International Nuclear Information System (INIS)

Cardoso, Fabiano S.; Faria, Rochkhudson B.; Silva, Lucas M.C.; Pereira, Claubia; Fortini, Angela

2015-01-01

Nowadays the demand from nuclear research centers for safety, regulation and better-estimated predictions provided with confidence bounds has been increasing. On that way, studies have pointed out that present uncertainties in the nuclear data should be significantly reduced, to get the full benefit from the advanced modeling and simulation initiatives. The major outcome of NEA/OECD (UAM) workshop took place Italy on 2006, was the preparation of a benchmark work program with steps (exercises) that would be needed to define the uncertainty and modeling tasks. On that direction, this work was performed within the framework of UAM Exercise 1 (I-1) 'Cell Physics' to validate the study, and to be able estimated the accuracies of the model. The objectives of this study were to make a preliminary analysis of criticality values of TMI-1 PWR and the biases of the results from two different nuclear codes multiplication factor. The range of the bias was obtained using the deterministic codes: NEWT (New ESC-based Weighting Transport code), the two-dimensional transport module that uses AMPX-formatted cross-sections processed by other SCALE; and WIMSD5 (Winfrith Improved Multi-Group Scheme) code. The WIMSD5 system consists of a simplified geometric representation of heterogeneous space zones that are coupled with each other and with the boundaries, while the properties of each spacing element are obtained from Carlson DSN method or Collision Probability method. (author)

RB reactor benchmark cores

International Nuclear Information System (INIS)

Pesic, M.

1998-01-01

A selected set of the RB reactor benchmark cores is presented in this paper. The first results of validation of the well-known Monte Carlo MCNP TM code and adjoining neutron cross section libraries are given. They confirm the idea for the proposal of the new U-D 2 O criticality benchmark system and support the intention to include this system in the next edition of the recent OECD/NEA Project: International Handbook of Evaluated Criticality Safety Experiment, in near future. (author)

CIEMAT’s contribution to the phase II of the OECD-NEA RIA benchmark on thermo-mechanical fuel codes performance

Energy Technology Data Exchange (ETDEWEB)

Sagrado, I.C.; Vallejo, I.; Herranz, L.E.

2015-07-01

As a part of the international efforts devoted to validate and/or update the current fuel safety criteria, the OECD-NEA has launched a second phase of the RIA benchmark on thermomechanical fuel codes performance. CIEMAT contributes simulating the ten scenarios proposed with FRAPTRAN and SCANAIR. Both codes lead to similar predictions during the heating-up; however, during the cooling-down significant deviations may appear. They are mainly caused by the estimations of gap closure and re-opening and the clad to water heat exchange approaches. The uncertainty analysis performed for the SCANAIR estimations leads to uncertainty ranges below 15% and 28% for maximum temperatures and deformations, respectively. The corresponding sensitivity analysis shows that, in addition to the injected energy, special attention should be paid to fuel thermal expansion and clad yield stress models. (Author)

OECD/NEA burnup credit criticality benchmarks phase IIIB: Burnup calculations of BWR fuel assemblies for storage and transport

International Nuclear Information System (INIS)

Okuno, Hiroshi; Naito, Yoshitaka; Suyama, Kenya

2002-02-01

The report describes the final results of the Phase IIIB Benchmark conducted by the Expert Group on Burnup Credit Criticality Safety under the auspices of the Nuclear Energy Agency (NEA) of the Organization for Economic Cooperation and Development (OECD). The Benchmark was intended to compare the predictability of current computer code and data library combinations for the atomic number densities of an irradiated PWR fuel assembly model. The fuel assembly was irradiated under specific power of 25.6 MW/tHM up to 40 GWd/tHM and cooled for five years. The void fraction was assumed to be uniform throughout the channel box and constant, at 0, 40 and 70%, during burnup. In total, 16 results were submitted from 13 institutes of 7 countries. The calculated atomic number densities of 12 actinides and 20 fission product nuclides were found to be for the most part within a range of ±10% relative to the average, although some results, esp. 155 Eu and gadolinium isotopes, exceeded the band, which will require further investigation. Pin-wise burnup results agreed well among the participants. The results in the infinite neutron multiplication factor k ∞ also accorded well with each other for void fractions of 0 and 40%; however some results deviated from the averaged value noticeably for the void fraction of 70%. (author)

OECD/NEA burnup credit criticality benchmarks phase IIIB. Burnup calculations of BWR fuel assemblies for storage and transport

Energy Technology Data Exchange (ETDEWEB)

Okuno, Hiroshi; Naito, Yoshitaka; Suyama, Kenya [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

2002-02-01

The report describes the final results of the Phase IIIB Benchmark conducted by the Expert Group on Burnup Credit Criticality Safety under the auspices of the Nuclear Energy Agency (NEA) of the Organization for Economic Cooperation and Development (OECD). The Benchmark was intended to compare the predictability of current computer code and data library combinations for the atomic number densities of an irradiated PWR fuel assembly model. The fuel assembly was irradiated under specific power of 25.6 MW/tHM up to 40 GWd/tHM and cooled for five years. The void fraction was assumed to be uniform throughout the channel box and constant, at 0, 40 and 70%, during burnup. In total, 16 results were submitted from 13 institutes of 7 countries. The calculated atomic number densities of 12 actinides and 20 fission product nuclides were found to be for the most part within a range of {+-}10% relative to the average, although some results, esp. {sup 155}Eu and gadolinium isotopes, exceeded the band, which will require further investigation. Pin-wise burnup results agreed well among the participants. The results in the infinite neutron multiplication factor k{sub {infinity}} also accorded well with each other for void fractions of 0 and 40%; however some results deviated from the averaged value noticeably for the void fraction of 70%. (author)

Overview of OECD/NEA BEPU Programmes

International Nuclear Information System (INIS)

Amri, Abdallah; Gulliford, Jim; )

2013-01-01

The OECD/NEA paved the way for the development and assessment of BEPU for about 40 years, through concrete tasks: International Standard Problems (ISPs), Benchmarking activities, Development of Validation Matrices, Joint Safety Research Projects, and Specialist meetings. Several NEA related Best-Estimate Plus Uncertainties (BEPU) programmes have been successfully completed: Uncertainty Methods Study (UMS), Best-Estimate Methods - Uncertainty and Sensitivity Evaluation (BEMUSE), Safety Margin Assessment and Application (SM2A), Uncertainty Analysis in Modeling (UAM) Benchmark. New Programmes are underway to address pending issues (e.g., input uncertainties, uncertainties in coupled codes). The present Workshop may highlight new issues to be addressed (e.g., uncertainty analysis for CFD codes). Document available in the slides-form only

OECD/NEA source convergence benchmark program: overview and summary of results

International Nuclear Information System (INIS)

Blomquist, Roger; Nouri, Ali; Armishaw, Malcolm; Jacquet, Olivier; Naito, Yoshitaka; Miyoshi, Yoshinori; Yamamoto, Toshihiro

2003-01-01

This paper describes the work of the OECD Nuclear Energy Agency Expert Group on Source Convergence in Criticality Safety Analysis. A set of test problems is presented, some computational results are given, and the effects of source convergence difficulties are described

OECD/NEA source convergence benchmark program. Overview and summary of results

International Nuclear Information System (INIS)

Blomquist, Roger; Nouri, Ali; Armishaw, Malcolm; Jacquet, Olivier; Naito, Yoshitaka; Miyoshi, Yoshinori; Yamamoto, Toshihiro

2003-01-01

This paper describes the work of the OECD Nuclear Energy Agency Expert Group on Source Convergence in Criticality Safety Analysis. A set of test problems is presented, some computational results are given, and the effects of source convergence difficulties are described. (author)

OECD/DOE/CEA VVER-1000 coolant transient (V1000CT) benchmark - a consistent approach for assessing coupled codes for RIA analysis

International Nuclear Information System (INIS)

Boyan D Ivanov; Kostadin N Ivanov; Eric Royer; Sylvie Aniel; Nikola Kolev; Pavlin Groudev

2005-01-01

Full text of publication follows: The Rod Ejection Accident (REA) and Main Steam Line Break (MSLB) are two of the most important Design Basis Accidents (DBA) for VVER-1000 exhibiting significant localized space-time effects. A consistent approach for assessing coupled three-dimensional (3-D) neutron kinetics/thermal hydraulics codes for these Reactivity Insertion Accidents (RIA) is to first validate the codes using the available plant test (measured) data and after that perform cross code comparative analysis for REA and MSLB scenarios. In the framework of joint effort between the Nuclear Energy Agency (NEA) of OECD, the United States Department of Energy (US DOE), and the Commissariat a l'Energie Atomique (CEA), France a coupled 3-D neutron kinetics/thermal hydraulics benchmark was defined. The benchmark is based on data from the Unit 6 of the Bulgarian Kozloduy Nuclear Power Plant (NPP). In performing this work the PSU, USA and CEA-Saclay, France have collaborated with Bulgarian organizations, in particular with the KNPP and the INRNE. The benchmark consists of two phases: Phase 1: Main Coolant Pump Switching On; Phase 2: Coolant Mixing Tests and MSLB. In addition to the measured (experiment) scenario, an extreme calculation scenario was defined for better testing 3-D neutronics/thermal-hydraulics techniques: rod ejection simulation with control rod being ejected in the core sector cooled by the switched on MCP. Since the previous coupled code benchmarks indicated that further development of the mixing computation models in the integrated codes is necessary, a coolant mixing experiment and MSLB transients are selected for simulation in Phase 2 of the benchmark. The MSLB event is characterized by a large asymmetric cooling of the core, stuck rods and a large primary coolant flow variation. Two scenarios are defined in Phase 2: the first scenario is taken from the current licensing practice and the second one is derived from the original one using aggravating

Assessment of multi-dimensional analysis cacpacity of the MARS using the OECD-SETH PANDA tests

International Nuclear Information System (INIS)

Bae, S. W.; Jung, J. J.; Jung, B. D.

2004-01-01

The objectives of OECD/NEA-PANDA tests are to validate and assess computer codes that analyze the non-condensable gas concentrations and mixing phenomena in a reactor containment building. Especially, the main issue is multi-dimensional analysis capability which is involved in the mixing of non-condensable gases, i. e. hydrogen. The main tests consist of a superheated steam flow injection into a large vessel initially filled with air or air/helium mixtures. Then the temperature and concentration of noncondensable gases are measured. A pre-calculation has been performed with the MARS about PANDA Tests even though MARS is not a containment analysis code. Three cases among 25 PANDA Tests are selected and are modeled to simulate the jet plumes and air mixing in a large vessel. The dimensions of large vessel are 4 m diameter and 8 m height. For the conclusion of calculation, the cylindrical vessel which dimensions are 4 m diameter and 8 m height was simplified as rectangular geometry. It is revealed that the MARS code has the capability to distinguish the multi-dimensional distribution of the velocity and the temperature fields

Source convergence diagnostics using Boltzmann entropy criterion application to different OECD/NEA criticality benchmarks with the 3-D Monte Carlo code Tripoli-4

International Nuclear Information System (INIS)

Dumonteil, E.; Le Peillet, A.; Lee, Y. K.; Petit, O.; Jouanne, C.; Mazzolo, A.

2006-01-01

The measurement of the stationarity of Monte Carlo fission source distributions in k eff calculations plays a central role in the ability to discriminate between fake and 'true' convergence (in the case of a high dominant ratio or in case of loosely coupled systems). Recent theoretical developments have been made in the study of source convergence diagnostics, using Shannon entropy. We will first recall those results, and we will then generalize them using the expression of Boltzmann entropy, highlighting the gain in terms of the various physical problems that we can treat. Finally we will present the results of several OECD/NEA benchmarks using the Tripoli-4 Monte Carlo code, enhanced with this new criterion. (authors)

The OECD/NRC BWR full-size fine-mesh bundle tests benchmark (BFBT)-general description

International Nuclear Information System (INIS)

Sartori, Enrico; Hochreiter, L.E.; Ivanov, Kostadin; Utsuno, Hideaki

2004-01-01

The need to refine models for best-estimate calculations based on good-quality experimental data have been expressed in many recent meetings in the field of nuclear applications. The needs arising in this respect should not be limited to currently available macroscopic approaches but should be extended to next-generation approaches that focus on more microscopic processes. One most valuable database identified for the thermal-hydraulics modelling was developed by the Nuclear Power Engineering Corporation (NUPEC). Part of this database will be made available for an international benchmark exercise. This fine-mesh high-quality data encourages advancement in the insufficiently developed field of the two-phase flow theory. Considering that the present theoretical approach is relatively immature, the benchmark specification is designed so that it will systematically assess and compare the participants' numerical models on the prediction of detailed void distributions and critical powers. The development of truly mechanistic models for critical power prediction is currently underway. These innovative models should include elementary processes such as void distributions, droplet deposit, liquid film entrainment, etc. The benchmark problem includes both macroscopic and microscopic measurement data. In this context, the sub-channel grade void fraction data are regarded as the macroscopic data, and the digitized computer graphic images are the microscopic data. The proposed benchmark consists of two parts (phases), each part consisting of different exercises: Phase 1- Void distribution benchmark: Exercise 1- Steady-state sub-channel grade benchmark. Exercise 2- Steady-state microscopic grade benchmark. Exercise 3-Transient macroscopic grade benchmark. Phase 2-Critical power benchmark: Exercise 1-Steady-state benchmark. Exercise 2-Transient benchmark. (author)

Validation of the coupled neutron kinetic thermohydraulic code ATHLET/DYN3D with help of measured data of the OECD Turbine Trip Benchmarks. Final report

International Nuclear Information System (INIS)

Grundmann, U.; Kliem, S.

2003-12-01

The project consisted in the validation of the coupled neutron kinetic/thermal hydraulic code system ATHLET/DYN3D for boiling water reactors by the participation at the OECD/NRC turbine trip benchmark. The benchmark defined by the OECD and the American NRC is based on an experiment with closure of the turbine stop valve which was carried out in 1977 in the nuclear power plant Peach Bottom 2 within the framework of a series of 3 experiments. In the experiment, the closure of the valve caused a pressure wave which propagated with attenuation into the reactor core. The condensation of steam in the reactor core caused by the increase of pressure lead to a positive reactivity insertion. The following rise of power was limited by the feedback and the insertion of the control rods. In the frame of the benchmark, the codes could be validated by comparisons with the measured results and the result of the other participants. The benchmark was divided into 3 phases or exercises. Phase I was used for checking the thermo-hydraulic model of the system using a given power release in the core. In phase II, three-dimensional core calculations were performed for given thermal-hydraulic boundary conditions. Coupled calculations were carried out for the selected experiment and four extreme scenarios in the phase III. In the frame of the project, FZR took part in phases II and III of the benchmark. The calculations for phase II were performed with DYN3D by using the assembly discontinuity factors (ADF) and 764 thermal-hydraulic channels (1 channel/assembly). The ATHLET input data set for the coolant system was obtained form the Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS). It was slightly modified for the phase III calculations carried out with the parallel coupling of ATHLET and DYN3D. For spatially averaged parameters, a good agreement with the results of measurement and the results of other codes was achieved. The influence of the different models was investigated with the

OECD/NEA Burnup Credit Calculational Criticality Benchmark Phase I-B Results

International Nuclear Information System (INIS)

DeHart, M.D.

1993-01-01

Burnup credit is an ongoing technical concern for many countries that operate commercial nuclear power reactors. In a multinational cooperative effort to resolve burnup credit issues, a Burnup Credit Working Group has been formed under the auspices of the Nuclear Energy Agency of the Organization for Economic Cooperation and Development. This working group has established a set of well-defined calculational benchmarks designed to study significant aspects of burnup credit computational methods. These benchmarks are intended to provide a means for the intercomparison of computer codes, methods, and data applied in spent fuel analysis. The benchmarks have been divided into multiple phases, each phase focusing on a particular feature of burnup credit analysis. This report summarizes the results and findings of the Phase I-B benchmark, which was proposed to provide a comparison of the ability of different code systems and data libraries to perform depletion analysis for the prediction of spent fuel isotopic concentrations. Results included here represent 21 different sets of calculations submitted by 16 different organizations worldwide, and are based on a limited set of nuclides determined to have the most important effect on the neutron multiplication factor of light-water-reactor spent fuel. A comparison of all sets of results demonstrates that most methods are in agreement to within 10% in the ability to estimate the spent fuel concentrations of most actinides. All methods are within 11% agreement about the average for all fission products studied. Furthermore, most deviations are less than 10%, and many are less than 5%. The exceptions are 149 Sm, 151 Sm, and 155 Gd

Department of Neurosurgery, Seth Gordhandas Sunderdas Medical College and King Edward VII Memorial (K.E.M.) Hospital, Mumbai.

Science.gov (United States)

Pandya, Sunil; Goel, Atul

2017-01-01

Seth Gordhandas Sunderdas Medical College and King Edward VII Memorial (K.E.M.) Hospital, Mumbai were inaugurated in 1925. This article traces its illustrious history and of the eminent neurosurgeons who shaped its destiny.

Impact of cross-section generation procedures on the simulation of the VVER 1000 pump startup experiment in the OECD/DOE/CEA V1000CT benchmark by coupled 3-D thermal hydraulics/ neutron kinetics models

International Nuclear Information System (INIS)

Boyan D Ivanov; Kostadin N Ivanov; Sylvie Aniel; Eric Royer

2005-01-01

Full text of publication follows: In the framework of joint effort between the Nuclear Energy Agency (NEA) of OECD, the United States Department of Energy (US DOE), and the Commissariat a l'Energie Atomique (CEA), France a coupled 3-D thermal hydraulics/neutron kinetics benchmark was defined. The overall objective OECD/NEA V1000CT benchmark is to assess computer codes used in analysis of VVER-1000 reactivity transients where mixing phenomena (mass flow and temperature) in the reactor pressure vessel are complex. Original data from the Kozloduy-6 Nuclear Power Plant are available for the validation of computer codes: one experiment of pump start-up (V1000CT-1) and one experiment of steam generator isolation (V1000CT-2). Additional scenarios are defined for code-to-code comparison. As a 3D core model is necessary for a best-estimate computation of all the scenarios of the V1000CT benchmark, all participants were asked to develop their own core coupled 3-D thermal hydraulics/ neutron kinetics models based on the data available in the benchmark specifications. The first code to code comparisons based on the V1000CT-1 Exercise 2 specifications exhibited unacceptable discrepancies between 2 sets of results, one of them being close to experimental results. The present paper focuses first on the analysis of the observed discrepancies. The VVER 1000 3-D thermal hydraulics/neutron kinetics models are based on thermal-hydraulic and neutronic data homogenized at the assembly scale. The neutronic data, provided as part of the benchmark specifications, consist thus in a set of parametrized 2 group cross sections libraries representing the different assemblies and the reflectors. The origin of the high observed discrepancies was found to lie in the use of these neutronic libraries. The concern was then to find a way to provide neutronic data, compatible with all the benchmark participants neutronic models, that enable also comparisons with experimental results. An analysis of the

Application of the coupled code Athlet-Quabox/Cubbox for the extreme scenarios of the OECD/NRC BWR turbine trip benchmark and its performance on multi-processor computers

International Nuclear Information System (INIS)

Langenbuch, S.; Schmidt, K.D.; Velkov, K.

2003-01-01

The OECD/NRC BWR Turbine Trip (TT) Benchmark is investigated to perform code-to-code comparison of coupled codes including a comparison to measured data which are available from turbine trip experiments at Peach Bottom 2. This Benchmark problem for a BWR over-pressure transient represents a challenging application of coupled codes which integrate 3-dimensional neutron kinetics into thermal-hydraulic system codes for best-estimate simulation of plant transients. This transient represents a typical application of coupled codes which are usually performed on powerful workstations using a single CPU. Nowadays, the availability of multi-CPUs is much easier. Indeed, powerful workstations already provide 4 to 8 CPU, computer centers give access to multi-processor systems with numbers of CPUs in the order of 16 up to several 100. Therefore, the performance of the coupled code Athlet-Quabox/Cubbox on multi-processor systems is studied. Different cases of application lead to changing requirements of the code efficiency, because the amount of computer time spent in different parts of the code is varying. This paper presents main results of the coupled code Athlet-Quabox/Cubbox for the extreme scenarios of the BWR TT Benchmark together with evaluations of the code performance on multi-processor computers. (authors)

OECD/NEA Burnup Credit Calculational Criticality Benchmark Phase I-B Results

Energy Technology Data Exchange (ETDEWEB)

DeHart, M.D.

1993-01-01

Burnup credit is an ongoing technical concern for many countries that operate commercial nuclear power reactors. In a multinational cooperative effort to resolve burnup credit issues, a Burnup Credit Working Group has been formed under the auspices of the Nuclear Energy Agency of the Organization for Economic Cooperation and Development. This working group has established a set of well-defined calculational benchmarks designed to study significant aspects of burnup credit computational methods. These benchmarks are intended to provide a means for the intercomparison of computer codes, methods, and data applied in spent fuel analysis. The benchmarks have been divided into multiple phases, each phase focusing on a particular feature of burnup credit analysis. This report summarizes the results and findings of the Phase I-B benchmark, which was proposed to provide a comparison of the ability of different code systems and data libraries to perform depletion analysis for the prediction of spent fuel isotopic concentrations. Results included here represent 21 different sets of calculations submitted by 16 different organizations worldwide, and are based on a limited set of nuclides determined to have the most important effect on the neutron multiplication factor of light-water-reactor spent fuel. A comparison of all sets of results demonstrates that most methods are in agreement to within 10% in the ability to estimate the spent fuel concentrations of most actinides. All methods are within 11% agreement about the average for all fission products studied. Furthermore, most deviations are less than 10%, and many are less than 5%. The exceptions are {sup 149}Sm, {sup 151}Sm, and {sup 155}Gd.

Verification of NUREC Code Transient Calculation Capability Using OECD NEA/US NRC PWR MOX/UO2 Core Transient Benchmark Problem

International Nuclear Information System (INIS)

Joo, Hyung Kook; Noh, Jae Man; Lee, Hyung Chul; Yoo, Jae Woon

2006-01-01

In this report, we verified the NUREC code transient calculation capability using OECD NEA/US NRC PWR MOX/UO2 Core Transient Benchmark Problem. The benchmark problem consists of Part 1, a 2-D problem with given T/H conditions, Part 2, a 3-D problem at HFP condition, Part 3, a 3-D problem at HZP condition, and Part 4, a transient state initiated by a control rod ejection at HZP condition in Part 3. In Part 1, the results of NUREC code agreed well with the reference solution obtained from DeCART calculation except for the pin power distributions at the rodded assemblies. In Part 2, the results of NUREC code agreed well with the reference DeCART solutions. In Part 3, some results of NUREC code such as critical boron concentration and core averaged delayed neutron fraction agreed well with the reference PARCS 2G solutions. But the error of the assembly power at the core center was quite large. The pin power errors of NUREC code at the rodded assemblies was much smaller the those of PARCS code. The axial power distribution also agreed well with the reference solution. In Part 4, the results of NUREC code agreed well with those of PARCS 2G code which was taken as the reference solution. From the above results we can conclude that the results of NUREC code for steady states and transient states of the MOX loaded LWR core agree well with those of the other codes

Overview of the burnup credit activities at OECD/NEA/NSC

International Nuclear Information System (INIS)

Brady Raap, M.C.; Nomura, Y.; Sartori, E.

2001-01-01

This article summarizes activities of the OECD/NEA Burnup Credit Expert Panel, a subordinate group to the Working Party on Nuclear Criticality Safety (WPNCS). The WPNCS of the OECD/NEA coordinates and carries out work in the domain of criticality safety at the international level. Particular attention is devoted to establishing sound databases required in this area and to addressing issues of high relevance such as burnup credit. The activities of the expert panel are aimed toward improving safety and identifying economic solutions to issues concerning the back-end of the fuel cycle. The main objective of the activities of the OECD/NEA Burnup Credit Expert Panel is to demonstrate that the available criticality safety calculational tools are appropriate for application to burned fuel systems and that a reasonable safety margin can be established. The method established by the expert panel for investigating the physics and predictability of burnup credit is based on the specification and comparison of calculational benchmark problems. A wide range of fuel types, including PWR, BWR, MOX, and VVER fuels, has been or are being addressed by the expert panel. The objective and status of each of these benchmark problems is reviewed in this article. It is important to note that the focus of the expert panel is the comparison of the results submitted by each participant to assess the capability of commonly used code systems, not to quantify the physical phenomena investigated in the comparisons or to make recommendations for licensing action. (author)

The weak force and SETH: The search for Extra-Terrestrial Homochirality

Science.gov (United States)

MacDermott, Alexandra J.

1996-07-01

We propose that a search for extra-terrestrial life can be approached as a Search for Extra-Terrestrial Homochirality-SETH. Homochirality is probably a pre-condition for life, so a chiral influence may be required to get life started. We explain how the weak force mediated by the Z0 boson gives rise to a small parity-violating energy difference (PVED) between enantiomers, and discuss how the resulting small excess of the more stable enantiomer may be amplified to homochirality. Titan and comets are good places to test for emerging pre-biotic homochirality, while on Mars there may be traces of homochirality as a relic of extinct life. Our calculations of the PVED show that the natural L-amino acids are indeed more stable than their enantiomers, as are several key D-sugars and right-hand helical DNA. Thiosubstituted DNA analogues show particularly large PVEDs. L-quartz is also more stable than D-quartz, and we believe that further crystal counts should be carried out to establish whether reported excesses of L quartz are real. Finding extra-terrestrial molecules of the same hand as on Earth would lend support to the universal chiral influence of the weak force. We describe a novel miniaturized space polarimeter, called the SETH Cigar, which we hope to use to detect optical rotation on other planets. Moving parts are avoided by replacing the normal rotating polarizer by multiple fixed polarizers at different angles as in the eye of the bee. Even if we do not find the same hand as on Earth, finding extra-terrestrial optical rotation would be of enormous importance as it would still be the homochiral signature of life.

OECD/NEA burnup credit calculational criticality benchmark Phase I-B results

Energy Technology Data Exchange (ETDEWEB)

DeHart, M.D.; Parks, C.V. [Oak Ridge National Lab., TN (United States); Brady, M.C. [Sandia National Labs., Las Vegas, NV (United States)

1996-06-01

In most countries, criticality analysis of LWR fuel stored in racks and casks has assumed that the fuel is fresh with the maximum allowable initial enrichment. This assumption has led to the design of widely spaced and/or highly poisoned storage and transport arrays. If credit is assumed for fuel burnup, initial enrichment limitations can be raised in existing systems, and more compact and economical arrays can be designed. Such reliance on the reduced reactivity of spent fuel for criticality control is referred to as burnup credit. The Burnup Credit Working Group, formed under the auspices of the Nuclear Energy Agency of the Organization for Economic Cooperation and Development, has established a set of well-defined calculational benchmarks designed to study significant aspects of burnup credit computational methods. These benchmarks are intended to provide a means for the intercomparison of computer codes, methods, and data applied in spent fuel analysis. The benchmarks have been divided into multiple phases, each phase focusing on a particular feature of burnup credit analysis. This report summarizes the results and findings of the Phase I-B benchmark, which was proposed to provide a comparison of the ability of different code systems and data libraries to perform depletion analysis for the prediction of spent fuel isotopic concentrations. Results included here represent 21 different sets of calculations submitted by 16 different organizations worldwide and are based on a limited set of nuclides determined to have the most important effect on the neutron multiplication factor of light-water-reactor spent fuel. A comparison of all sets of results demonstrates that most methods agree to within 10% in the ability to estimate the spent fuel concentrations of most actinides. All methods agree within 11% about the average for all fission products studied. Most deviations are less than 10%, and many are less than 5%. The exceptions are Sm 149, Sm 151, and Gd 155.

OECD/NEA burnup credit calculational criticality benchmark Phase I-B results

International Nuclear Information System (INIS)

DeHart, M.D.; Parks, C.V.; Brady, M.C.

1996-06-01

In most countries, criticality analysis of LWR fuel stored in racks and casks has assumed that the fuel is fresh with the maximum allowable initial enrichment. This assumption has led to the design of widely spaced and/or highly poisoned storage and transport arrays. If credit is assumed for fuel burnup, initial enrichment limitations can be raised in existing systems, and more compact and economical arrays can be designed. Such reliance on the reduced reactivity of spent fuel for criticality control is referred to as burnup credit. The Burnup Credit Working Group, formed under the auspices of the Nuclear Energy Agency of the Organization for Economic Cooperation and Development, has established a set of well-defined calculational benchmarks designed to study significant aspects of burnup credit computational methods. These benchmarks are intended to provide a means for the intercomparison of computer codes, methods, and data applied in spent fuel analysis. The benchmarks have been divided into multiple phases, each phase focusing on a particular feature of burnup credit analysis. This report summarizes the results and findings of the Phase I-B benchmark, which was proposed to provide a comparison of the ability of different code systems and data libraries to perform depletion analysis for the prediction of spent fuel isotopic concentrations. Results included here represent 21 different sets of calculations submitted by 16 different organizations worldwide and are based on a limited set of nuclides determined to have the most important effect on the neutron multiplication factor of light-water-reactor spent fuel. A comparison of all sets of results demonstrates that most methods agree to within 10% in the ability to estimate the spent fuel concentrations of most actinides. All methods agree within 11% about the average for all fission products studied. Most deviations are less than 10%, and many are less than 5%. The exceptions are Sm 149, Sm 151, and Gd 155

POLCA-T simulation of OECD/NRC BWR turbine trip benchmark exercise 3 best estimate scenario TT2 test and four extreme scenarios

International Nuclear Information System (INIS)

Panayotov, D.

2004-01-01

Westinghouse transient code POLCA-T brings together the system thermal-hydraulics plant models and the 3D neutron kinetics core model. Code validation plan includes the calculations of Peach Bottom end of cycle 2 turbine trip transients and low-flow stability tests. The paper describes the objectives, method, and results of analyses performed in the final phase of OECD/NRC Peach Bottom 2 Boiling Water Reactor Turbine Trip Benchmark. Brief overview of the code features, the method of simulation, the developed 3D core model and system input deck for Peach Bottom 2 are given. The paper presents the results of benchmark exercise 3 best estimate scenario: coupled 3D core neutron kinetics with system thermal-hydraulics analyses. Performed sensitivity studies cover the SCRAM initiation, carry-under, and decay power. Obtained results including total power, steam dome, core exit, lower and upper plenum, main steam line and turbine inlet pressures showed good agreement with measured plant data Thus the POLCA-T code capabilities for correct simulation of turbine trip transients were proved The performed calculations and obtained results for extreme cases demonstrate the POLCA-T code wide range capabilities to simulate transients when scram, steam bypass, and safety and relief valves are not activated. The code is able to handle such transients even when the reactor power and pressure reach values higher than 600 % of rated power, and 10.8 MPa. (authors)

Introduction to 'International Handbook of Criticality Safety Benchmark Experiments'

International Nuclear Information System (INIS)

Komuro, Yuichi

1998-01-01

The Criticality Safety Benchmark Evaluation Project (CSBEP) was initiated in 1992 by the United States Department of Energy. The project quickly became an international effort as scientists from other interested countries became involved. The International Criticality Safety Benchmark Evaluation Project (ICSBEP) is now an official activity of the Organization for Economic Cooperation and Development-Nuclear Energy Agency (OECD-NEA). 'International Handbook of Criticality Safety Benchmark Experiments' was prepared and is updated year by year by the working group of the project. This handbook contains criticality safety benchmark specifications that have been derived from experiments that were performed at various nuclear critical facilities around the world. The benchmark specifications are intended for use by criticality safety engineers to validate calculation techniques used. The author briefly introduces the informative handbook and would like to encourage Japanese engineers who are in charge of nuclear criticality safety to use the handbook. (author)

Prismatic Core Coupled Transient Benchmark

International Nuclear Information System (INIS)

Ortensi, J.; Pope, M.A.; Strydom, G.; Sen, R.S.; DeHart, M.D.; Gougar, H.D.; Ellis, C.; Baxter, A.; Seker, V.; Downar, T.J.; Vierow, K.; Ivanov, K.

2011-01-01

The Prismatic Modular Reactor (PMR) is one of the High Temperature Reactor (HTR) design concepts that have existed for some time. Several prismatic units have operated in the world (DRAGON, Fort St. Vrain, Peach Bottom) and one unit is still in operation (HTTR). The deterministic neutronics and thermal-fluids transient analysis tools and methods currently available for the design and analysis of PMRs have lagged behind the state of the art compared to LWR reactor technologies. This has motivated the development of more accurate and efficient tools for the design and safety evaluations of the PMR. In addition to the work invested in new methods, it is essential to develop appropriate benchmarks to verify and validate the new methods in computer codes. The purpose of this benchmark is to establish a well-defined problem, based on a common given set of data, to compare methods and tools in core simulation and thermal hydraulics analysis with a specific focus on transient events. The benchmark-working group is currently seeking OECD/NEA sponsorship. This benchmark is being pursued and is heavily based on the success of the PBMR-400 exercise.

The weak force and SETH: The search for Extra-Terrestrial Homochirality

International Nuclear Information System (INIS)

MacDermott, A.J.

1996-01-01

We propose that a search for extra-terrestrial life can be approached as a Search for Extra-Terrestrial Homochirality emdash SETH. Homochirality is probably a pre-condition for life, so a chiral influence may be required to get life started. We explain how the weak force mediated by the Z 0 boson gives rise to a small parity-violating energy difference (PVED) between enantiomers, and discuss how the resulting small excess of the more stable enantiomer may be amplified to homochirality. Titan and comets are good places to test for emerging pre-biotic homochirality, while on Mars there may be traces of homochirality as a relic of extinct life. Our calculations of the PVED show that the natural L-amino acids are indeed more stable than their enantiomers, as are several key D-sugars and right-hand helical DNA. Thiosubstituted DNA analogues show particularly large PVEDs. L-quartz is also more stable than D-quartz, and we believe that further crystal counts should be carried out to establish whether reported excesses of L quartz are real. Finding extra-terrestrial molecules of the same hand as on Earth would lend support to the universal chiral influence of the weak force. We describe a novel miniaturized space polarimeter, called the SETH Cigar, which we hope to use to detect optical rotation on other planets. Moving parts are avoided by replacing the normal rotating polarizer by multiple fixed polarizers at different angles as in the eye of the bee. Even if we do not find the same hand as on Earth, finding extra-terrestrial optical rotation would be of enormous importance as it would still be the homochiral signature of life. copyright 1996 American Institute of Physics

Shielding Benchmark Computational Analysis

International Nuclear Information System (INIS)

Hunter, H.T.; Slater, C.O.; Holland, L.B.; Tracz, G.; Marshall, W.J.; Parsons, J.L.

2000-01-01

Over the past several decades, nuclear science has relied on experimental research to verify and validate information about shielding nuclear radiation for a variety of applications. These benchmarks are compared with results from computer code models and are useful for the development of more accurate cross-section libraries, computer code development of radiation transport modeling, and building accurate tests for miniature shielding mockups of new nuclear facilities. When documenting measurements, one must describe many parts of the experimental results to allow a complete computational analysis. Both old and new benchmark experiments, by any definition, must provide a sound basis for modeling more complex geometries required for quality assurance and cost savings in nuclear project development. Benchmarks may involve one or many materials and thicknesses, types of sources, and measurement techniques. In this paper the benchmark experiments of varying complexity are chosen to study the transport properties of some popular materials and thicknesses. These were analyzed using three-dimensional (3-D) models and continuous energy libraries of MCNP4B2, a Monte Carlo code developed at Los Alamos National Laboratory, New Mexico. A shielding benchmark library provided the experimental data and allowed a wide range of choices for source, geometry, and measurement data. The experimental data had often been used in previous analyses by reputable groups such as the Cross Section Evaluation Working Group (CSEWG) and the Organization for Economic Cooperation and Development/Nuclear Energy Agency Nuclear Science Committee (OECD/NEANSC)

Fast burner reactor benchmark results from the NEA working party on physics of plutonium recycle

International Nuclear Information System (INIS)

Hill, R.N.; Wade, D.C.; Palmiotti, G.

1995-01-01

As part of a program proposed by the OECD/NEA Working Party on Physics of Plutonium Recycling (WPPR) to evaluate different scenarios for the use of plutonium, fast reactor physics benchmarks were developed; fuel cycle scenarios using either PUREX/TRUEX (oxide fuel) or pyrometallurgical (metal fuel) separation technologies were specified. These benchmarks were designed to evaluate the nuclear performance and radiotoxicity impact of a transuranic-burning fast reactor system. International benchmark results are summarized in this paper; and key conclusions are highlighted

Benchmarking ENDF/B-VII.1, JENDL-4.0 and JEFF-3.1

International Nuclear Information System (INIS)

Van Der Marck, S. C.

2012-01-01

Three nuclear data libraries have been tested extensively using criticality safety benchmark calculations. The three libraries are the new release of the US library ENDF/B-VII.1 (2011), the new release of the Japanese library JENDL-4.0 (2011), and the OECD/NEA library JEFF-3.1 (2006). All calculations were performed with the continuous-energy Monte Carlo code MCNP (version 4C3, as well as version 6-beta1). Around 2000 benchmark cases from the International Handbook of Criticality Safety Benchmark Experiments (ICSBEP) were used. The results were analyzed per ICSBEP category, and per element. Overall, the three libraries show similar performance on most criticality safety benchmarks. The largest differences are probably caused by elements such as Be, C, Fe, Zr, W. (authors)

International benchmark for coupled codes and uncertainty analysis in modelling: switching-Off of one of the four operating main circulation pumps at nominal reactor power at NPP Kalinin unit 3

International Nuclear Information System (INIS)

Tereshonok, V. A.; Nikonov, S. P.; Lizorkin, M. P.; Velkov, K; Pautz, A.; Ivanov, V.

2008-01-01

The paper briefly describes the Specification of an international NEA/OECD benchmark based on measured plant data. During the commissioning tests for nominal power at NPP Kalinin Unit 3 a lot of measurements of neutron and thermo-hydraulic parameters have been carried out in the reactor pressure vessel, primary and the secondary circuits. One of the measured data sets for the transient 'Switching-off of one Main Circulation Pump (MCP) at nominal power' has been chosen to be applied for validation of coupled thermal-hydraulic and neutron-kinetic system codes and additionally for performing of uncertainty analyses as a part of the NEA/OECD Uncertainty Analysis in Modeling Benchmark. The benchmark is opened for all countries and institutions. The experimental data and the final specification with the cross section libraries will be provided to the participants from NEA/OECD only after official declaration of real participation in the benchmark and delivery of the simulated results of the transient for comparison. (Author)

Attila calculations for the 3-D C5G7 benchmark extension

International Nuclear Information System (INIS)

Wareing, T.A.; McGhee, J.M.; Barnett, D.A.; Failla, G.A.

2005-01-01

The performance of the Attila radiation transport software was evaluated for the 3-D C5G7 MOX benchmark extension, a follow-on study to the MOX benchmark developed by the 'OECD/NEA Expert Group on 3-D Radiation Transport Benchmarks'. These benchmarks were designed to test the ability of modern deterministic transport methods to model reactor problems without spatial homogenization. Attila is a general purpose radiation transport software package with an integrated graphical user interface (GUI) for analysis, set-up and postprocessing. Attila provides solutions to the discrete-ordinates form of the linear Boltzmann transport equation on a fully unstructured, tetrahedral mesh using linear discontinuous finite-element spatial differencing in conjunction with diffusion synthetic acceleration of inner iterations. The results obtained indicate that Attila can accurately solve the benchmark problem without spatial homogenization. (authors)

Summary of the First Workshop on OECD/NRC boiling water reactor turbine trip benchmark

International Nuclear Information System (INIS)

2000-11-01

The reference problem chosen for simulation in a BWR is a Turbine Trip transient, which begins with a sudden Turbine Stop Valve (TSV) closure. The pressure oscillation generated in the main steam piping propagates with relatively little attenuation into the reactor core. The induced core pressure oscillation results in dramatic changes of the core void distribution and fluid flow. The magnitude of the neutron flux transient taking place in the BWR core is strongly affected by the initial rate of pressure rise caused by pressure oscillation and has a strong spatial variation. The correct simulation of the power response to the pressure pulse and subsequent void collapse requires a 3-D core modeling supplemented by 1-D simulation of the remainder of the reactor coolant system. A BWR TT benchmark exercise, based on a well-defined problem with complete set of input specifications and reference experimental data, has been proposed for qualification of the coupled 3-D neutron kinetics/thermal-hydraulic system transient codes. Since this kind of transient is a dynamically complex event with reactor variables changing very rapidly, it constitutes a good benchmark problem to test the coupled codes on both levels: neutronics/thermal-hydraulic coupling and core/plant system coupling. Subsequently, the objectives of the proposed benchmark are: comprehensive feedback testing and examination of the capability of coupled codes to analyze complex transients with coupled core/plant interactions by comparison with actual experimental data. The benchmark consists of three separate exercises: Exercise 1 - Power vs. Time Plant System Simulation with Fixed Axial Power Profile Table (Obtained from Experimental Data). Exercise 2 - Coupled 3-D Kinetics/Core Thermal-Hydraulic BC Model and/or 1-D Kinetics Plant System Simulation. Exercise 3 - Best-Estimate Coupled 3-D Core/Thermal-Hydraulic System Modeling. This first workshop was focused on technical issues connected with the first draft of

Benchmark calculations of power distribution within assemblies

International Nuclear Information System (INIS)

Cavarec, C.; Perron, J.F.; Verwaerde, D.; West, J.P.

1994-09-01

The main objective of this Benchmark is to compare different techniques for fine flux prediction based upon coarse mesh diffusion or transport calculations. We proposed 5 ''core'' configurations including different assembly types (17 x 17 pins, ''uranium'', ''absorber'' or ''MOX'' assemblies), with different boundary conditions. The specification required results in terms of reactivity, pin by pin fluxes and production rate distributions. The proposal for these Benchmark calculations was made by J.C. LEFEBVRE, J. MONDOT, J.P. WEST and the specification (with nuclear data, assembly types, core configurations for 2D geometry and results presentation) was distributed to correspondents of the OECD Nuclear Energy Agency. 11 countries and 19 companies answered the exercise proposed by this Benchmark. Heterogeneous calculations and homogeneous calculations were made. Various methods were used to produce the results: diffusion (finite differences, nodal...), transport (P ij , S n , Monte Carlo). This report presents an analysis and intercomparisons of all the results received

A study of stress in medical students at Seth G.S. Medical College.

Directory of Open Access Journals (Sweden)

Supe A

1998-01-01

Full Text Available BACKGROUND: It is usually observed that medical students undergo tremendous stress during various stages of the MBBS course. There is a high rate of suicide among them. METHODS: To determine incidence of stress and factors controlling stress in medical students at various stages of MBBS course at Seth G S Medical college, 238 students (First year 98, Second 76, Third 64 were asked to complete a questionnaire on personal data (gender, stay at hostel, mode of travel, time spent in travel every day, medium of study in school, place of school education., Stress inducing factors, Zung′s depression scale, ways of coping, stress relievers, perceived social support and personality type. Statistical tests used were ANOVA, critical ratio and Student′s ′t′ test. RESULTS: Majority of medical students (175/238--73% perceived stress. Stress was found to be significantly more in Second and Third MBBS students rather than First MBBS levels (p < 0.05. Stress was not found to differ significantly on the basis of sex, stay at hostel, model of travel, time spent in travel every day, medium of study in school, place of school education. Stress was found to be significantly more in students having more than 95% of marks at 12th Standard as compared to others. Academic factors were greater perceived cause of stress in medical students. There was no significant difference in the students at different levels of MBBS regarding academic factors and social factors as a stress inducing factors. Physical factors were found to be significantly more in Second and Third MBBS students as compared to First MBBS students. Emotional factors were found to be significantly more in First MBBS students as compared to Second & Third MBBS students. Stress was more common in medical students who have dominant strategy of coping as positive reappraisal, accepting responsibility and planful problem solving. Stress was less common in medical students at Seth G S Medical College who

Current Reactor Physics Benchmark Activities at the Idaho National Laboratory

International Nuclear Information System (INIS)

Bess, John D.; Marshall, Margaret A.; Gorham, Mackenzie L.; Christensen, Joseph; Turnbull, James C.; Clark, Kim

2011-01-01

The International Reactor Physics Experiment Evaluation Project (IRPhEP) (1) and the International Criticality Safety Benchmark Evaluation Project (ICSBEP) (2) were established to preserve integral reactor physics and criticality experiment data for present and future research. These valuable assets provide the basis for recording, developing, and validating our integral nuclear data, and experimental and computational methods. These projects are managed through the Idaho National Laboratory (INL) and the Organisation for Economic Co-operation and Development Nuclear Energy Agency (OECD-NEA). Staff and students at the Department of Energy - Idaho (DOE-ID) and INL are engaged in the development of benchmarks to support ongoing research activities. These benchmarks include reactors or assemblies that support Next Generation Nuclear Plant (NGNP) research, space nuclear Fission Surface Power System (FSPS) design validation, and currently operational facilities in Southeastern Idaho.

Pride and prejudice and zombies: The classic Regency romance—Now with ultraviolent zombie mayhem!, by Jane Austen and Seth Grahame-Smith [book review

Directory of Open Access Journals (Sweden)

Craig B. Jacobsen

2009-11-01

Full Text Available Review of Jane Austen and Seth Grahame-Smith. Pride and prejudice and zombies: The classic Regency romance—Now with ultraviolent zombie mayhem! Philadelphia, PA: Quirk Books, 2009. $12.95 (320p ISBN 978-1594743344.

Comparison of the PHISICS/RELAP5-3D Ring and Block Model Results for Phase I of the OECD MHTGR-350 Benchmark

Energy Technology Data Exchange (ETDEWEB)

Gerhard Strydom

2014-04-01

The INL PHISICS code system consists of three modules providing improved core simulation capability: INSTANT (performing 3D nodal transport core calculations), MRTAU (depletion and decay heat generation) and a perturbation/mixer module. Coupling of the PHISICS code suite to the thermal hydraulics system code RELAP5-3D has recently been finalized, and as part of the code verification and validation program the exercises defined for Phase I of the OECD/NEA MHTGR 350 MW Benchmark were completed. This paper provides an overview of the MHTGR Benchmark, and presents selected results of the three steady state exercises 1-3 defined for Phase I. For Exercise 1, a stand-alone steady-state neutronics solution for an End of Equilibrium Cycle Modular High Temperature Reactor (MHTGR) was calculated with INSTANT, using the provided geometry, material descriptions, and detailed cross-section libraries. Exercise 2 required the modeling of a stand-alone thermal fluids solution. The RELAP5-3D results of four sub-cases are discussed, consisting of various combinations of coolant bypass flows and material thermophysical properties. Exercise 3 combined the first two exercises in a coupled neutronics and thermal fluids solution, and the coupled code suite PHISICS/RELAP5-3D was used to calculate the results of two sub-cases. The main focus of the paper is a comparison of the traditional RELAP5-3D “ring” model approach vs. a much more detailed model that include kinetics feedback on individual block level and thermal feedbacks on a triangular sub-mesh. The higher fidelity of the block model is illustrated with comparison results on the temperature, power density and flux distributions, and the typical under-predictions produced by the ring model approach are highlighted.

Validation of Westinghouse integrated code POLCA-T against OECD NEACRP-L-335 rod ejection benchmark

Energy Technology Data Exchange (ETDEWEB)

Panayotov, Dobromir [Westinghouse Electric Sweden AB, Vaesteraas, SE-721 63 (Sweden)

2008-07-01

This paper describes the work performed and results obtained in the validation of the POLCA-T code against NEACRP PWR Rod Ejection Transients Benchmark. Presented work is a part of the POLCA-T licensing Assessment Data Base for BWR Control Rod Drop Accident (CRDA) Application. The validation against a PWR Rod Ejection Accidents (REA) Benchmark is relevant for the validation of the code for BWR CRDA, as the analyses of both transients require identical phenomena to be modelled. All six benchmark cases have been analyzed in the presented work. Initial state steady-state calculations including boron search, control rod worth, and final state power search have been performed by POLCA7 code. Initial state boron adjustment and steady-state CR worth as well as the transient analyses were performed by POLCA-T code. Benchmark results including 3D transient power distributions are compared with reference PANTHER solutions and published results of other codes. Given the similarity of the kinetics modelling for a BWR CRDA and a PWR REA and the fact that POLCA-T accurately predicts the local transient power and thus, the resulting fuel enthalpy, it is concluded that POLCA-T is a state-of-art tool also for BWR CRDA analysis. (author)

Validation of Westinghouse integrated code POLCA-T against OECD NEACRP-L-335 rod ejection benchmark

International Nuclear Information System (INIS)

Panayotov, Dobromir

2008-01-01

This paper describes the work performed and results obtained in the validation of the POLCA-T code against NEACRP PWR Rod Ejection Transients Benchmark. Presented work is a part of the POLCA-T licensing Assessment Data Base for BWR Control Rod Drop Accident (CRDA) Application. The validation against a PWR Rod Ejection Accidents (REA) Benchmark is relevant for the validation of the code for BWR CRDA, as the analyses of both transients require identical phenomena to be modelled. All six benchmark cases have been analyzed in the presented work. Initial state steady-state calculations including boron search, control rod worth, and final state power search have been performed by POLCA7 code. Initial state boron adjustment and steady-state CR worth as well as the transient analyses were performed by POLCA-T code. Benchmark results including 3D transient power distributions are compared with reference PANTHER solutions and published results of other codes. Given the similarity of the kinetics modelling for a BWR CRDA and a PWR REA and the fact that POLCA-T accurately predicts the local transient power and thus, the resulting fuel enthalpy, it is concluded that POLCA-T is a state-of-art tool also for BWR CRDA analysis. (author)

VENUS-2 Benchmark Problem Analysis with HELIOS-1.9

International Nuclear Information System (INIS)

Jeong, Hyeon-Jun; Choe, Jiwon; Lee, Deokjung

2014-01-01

Since there are reliable results of benchmark data from the OECD/NEA report of the VENUS-2 MOX benchmark problem, by comparing benchmark results users can identify the credibility of code. In this paper, the solution of the VENUS-2 benchmark problem from HELIOS 1.9 using the ENDF/B-VI library(NJOY91.13) is compared with the result from HELIOS 1.7 with consideration of the MCNP-4B result as reference data. The comparison contains the results of pin cell calculation, assembly calculation, and core calculation. The eigenvalues from those are considered by comparing the results from other codes. In the case of UOX and MOX assemblies, the differences from the MCNP-4B results are about 10 pcm. However, there is some inaccuracy in baffle-reflector condition, and relatively large differences were found in the MOX-reflector assembly and core calculation. Although HELIOS 1.9 utilizes an inflow transport correction, it seems that it has a limited effect on the error in baffle-reflector condition

Procedures for initiation, cost-sharing and management of OECD projects in nuclear safety

International Nuclear Information System (INIS)

2002-01-01

The OECD (CSNI) projects aim to produce results relevant for the safe operation of nuclear power plants through international collaborative projects. In general, the projects consist of advanced experimental programmes that are conducted at specialized facilities. At present, the following OECD (CSNI) projects are in operation: - The Halden Project, covering fuel/materials and I and C/Human Factors issues; - The Cabri Project, addressing reactivity transients on high burnup fuels; - The MASCA Project, which deals with in-vessel corium phenomena; - The OLHF Project, dealing with lower head failure mechanisms; - The SETH Project addressing thermal-hydraulics issues, started in 2001; - The MCCI Project on ex-vessel coolability and melt-concrete interaction. There are significant differences among these projects in terms of their motivation, size and scope. The Halden Project and the Cabri Water Loop Project are large undertakings where the host organisations assume full and direct responsibility for the project establishment and administration - as well as for the negotiation with relevant parties on the terms of participation. In the other cases, instead, the NEA secretariat has a more direct responsibility, conferred by the CSNI, in establishing the project technical and financial basis, as well as for its implementation and administration. The objective of this procedure is to provide a common basis for the establishment and management of the OECD projects in the area of nuclear safety. It is a follow-up of a recommendation expressed by the CSNI Bureau during its meeting in October 2001, where the procedures for the establishment and management of the OECD (CSNI) projects in nuclear safety were addressed. While this procedure attempts at defining general guidelines for project initiation, financing and management, one should bear in mind that each project has its own motivation, background and framework. Thus, some degree of flexibility in project structure

Renewable energy and macroeconomic efficiency of OECD and non-OECD economies

International Nuclear Information System (INIS)

Chien, Taichen; Hu, Jin-Li

2007-01-01

This article analyzes the effects of renewable energy on the technical efficiency of 45 economies during the 2001-2002 period through data envelopment analysis (DEA). In our DEA model, labor, capital stock, and energy consumption are the three inputs and real GDP is the single output. Increasing the use of renewable energy improves an economy's technical efficiency. Conversely, increasing the input of traditional energy decreases technical efficiency. Compared to non-OECD economies, OECD economies have higher technical efficiency and a higher share of geothermal, solar, tide, and wind fuels in renewable energy. However, non-OECD economies have a higher share of renewable energy in their total energy supply than OECD economies

OECD-FIRE PR02. OECD-FIRE database record structure

International Nuclear Information System (INIS)

Kolar, L.

2005-12-01

In the coding guidelines, the scope, format, and details of any record required to input a real fire event at a nuclear reactor unit to the international OECD-FIRE database are described in detail. The database was set up in the OECD-FIRE-PR02 code

OECD/NEA thermochemical database

Energy Technology Data Exchange (ETDEWEB)

Byeon, Kee Hoh; Song, Dae Yong; Shin, Hyun Kyoo; Park, Seong Won; Ro, Seung Gy

1998-03-01

This state of the art report is to introduce the contents of the Chemical Data-Service, OECD/NEA, and the results of survey by OECD/NEA for the thermodynamic and kinetic database currently in use. It is also to summarize the results of Thermochemical Database Projects of OECD/NEA. This report will be a guide book for the researchers easily to get the validate thermodynamic and kinetic data of all substances from the available OECD/NEA database. (author). 75 refs.

Research and Activities of OECD/NEA Benchmark Study of the Accident at the Fukushima Daiichi Nuclear Power Station (BSAF) Project

Energy Technology Data Exchange (ETDEWEB)

Kim, Sung Il; Ha, Kwang Soon; Song, JinHo [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2016-10-15

The severe accident codes were used to analysis the Fukushima Daiichi accident and give valuable information. In addition, the insufficient part of the code could be revised by comparing the calculation result with the measured data. In this circumstance, working plans have been set up to conduct a Benchmark Study of the Accident progression for the Fukushima Daiichi nuclear power plant(BSAF) units 1-3 with the members of the OECD/NEA. The BSAF project was launched in November 2012 with the fifteen organizations of eight countries (France, Germany, Korea, Russia, Spain, Switzerland, the United States, and Japan). The objectives of the project are: - to analyze the Fukushima accident progression. - to raise the understanding of severe accident(SA) phenomena. - to contribute the improvement of methods and models of SA code. - to contribute the status of debris distribution to a future debris removal plan. BSAF phase 2 also has been implemented from April, 2015 and it will be continued to March, 2018. It is more focused on the fission product behavior and source term estimation in phase 2. The phase 2 project implementation period is 3 years from April 2015 to March 2018. The main topic of the BSAF 2 is the fission product behavior in the Fukushima nuclear power plant. In the process of calculation, it is important to know the insufficient models in the code. Furthermore, the model would be applied to the KAERI's severe accident code after making up for the insufficient part.

CEA-IPSN Participation in the MSLB Benchmark

International Nuclear Information System (INIS)

Royer, E.; Raimond, E.; Caruge, D.

2001-01-01

The OECD/NEA Main Steam Line Break (MSLB) Benchmark allows the comparison of state-of-the-art and best-estimate models used to compute reactivity accidents. The three exercises of the MSLB benchmark are defined with the aim of analyzing the space and time effects in the core and their modeling with computational tools. Point kinetics (exercise 1) simulation results in a return to power (RTP) after scram, whereas 3-D kinetics (exercises 2 and 3) does not display any RTP. The objective is to understand the reasons for the conservative solution of point kinetics and to assess the benefits of best-estimate models. First, the core vessel mixing model is analyzed; second, sensitivity studies on point kinetics are compared to 3-D kinetics; third, the core thermal hydraulics model and coupling with neutronics is presented; finally, RTP and a suitable model for MSLB are discussed

NUPEC BWR Full-size Fine-mesh Bundle Test (BFBT) Benchmark. Volume II: uncertainty and sensitivity analyses of void distribution and critical power - Specification

International Nuclear Information System (INIS)

Aydogan, F.; Hochreiter, L.; Ivanov, K.; Martin, M.; Utsuno, H.; Sartori, E.

2010-01-01

This report provides the specification for the uncertainty exercises of the international OECD/NEA, NRC and NUPEC BFBT benchmark problem including the elemental task. The specification was prepared jointly by Pennsylvania State University (PSU), USA and the Japan Nuclear Energy Safety (JNES) Organisation, in cooperation with the OECD/NEA and the Commissariat a l'energie atomique (CEA Saclay, France). The work is sponsored by the US NRC, METI-Japan, the OECD/NEA and the Nuclear Engineering Program (NEP) of Pennsylvania State University. This uncertainty specification covers the fourth exercise of Phase I (Exercise-I-4), and the third exercise of Phase II (Exercise II-3) as well as the elemental task. The OECD/NRC BFBT benchmark provides a very good opportunity to apply uncertainty analysis (UA) and sensitivity analysis (SA) techniques and to assess the accuracy of thermal-hydraulic models for two-phase flows in rod bundles. During the previous OECD benchmarks, participants usually carried out sensitivity analysis on their models for the specification (initial conditions, boundary conditions, etc.) to identify the most sensitive models or/and to improve the computed results. The comprehensive BFBT experimental database (NEA, 2006) leads us one step further in investigating modelling capabilities by taking into account the uncertainty analysis in the benchmark. The uncertainties in input data (boundary conditions) and geometry (provided in the benchmark specification) as well as the uncertainties in code models can be accounted for to produce results with calculational uncertainties and compare them with the measurement uncertainties. Therefore, uncertainty analysis exercises were defined for the void distribution and critical power phases of the BFBT benchmark. This specification is intended to provide definitions related to UA/SA methods, sensitivity/ uncertainty parameters, suggested probability distribution functions (PDF) of sensitivity parameters, and selected

A Steam Jet Plume Simulation in a Large Bulk Space with a System Code MARS

International Nuclear Information System (INIS)

Bae, Sung Won; Chung, Bub Dong

2006-01-01

From May 2002, the OECD-SETH group has launched the PANDA Project in order to provide an experimental data base for a multi-dimensional code assessment. OECD-SETH group expects the PANDA Project will meet the increasing needs for adequate experimental data for a 3D distribution of relevant variables like the temperature, velocity and steam-air concentrations that are measured with a sufficient resolution and accuracy. The scope of the PANDA Project is the mixture stratification and mixing phenomena in a large bulk space. Total of 24 test series are still being performed in PSI, Switzerland. The PANDA facility consists of 2 main large vessels and 1 connection pipe Within the large vessels, a steam injection nozzle and outlet vent are arranged for each test case. These tests are categorized into 3 modes, i.e. the high momentum, near wall plume, and free plume tests. KAERI has also participated in the SETH group since 1997 so that the multi-dimensional capability of the MARS code could be assessed and developed. Test 17, the high steam jet injection test, has already been simulated by MARS and shows promising results. Now, the test 9 and 9bis cases which use a low speed horizontal steam jet flow have been simulated and investigated

Aid performance and its determinants. A comparison of Italy with the OECD norm

Directory of Open Access Journals (Sweden)

Simone Bertoli

2007-09-01

Full Text Available this paper aims at contributing to a better understanding of the determinants of aid effort by donor countries, a topic that has been rather under researched in the vast economic literature on development aid. We conduct an econometric analysis on panel data that refer to the 22 member countries of the OECD Development Assistance Committee over the 1970 2004 period; the estimates are then used as a benchmark against which we assess to what extent the poor Italian aid performance can be traced back to its specific macroeconomic, structural and institutional characteristics. The analysis suggests that these factors – that are found to significantly influence aid effort – fall short of explaining the limited amount of fiscal resources that Italy devotes to international aid. Even when its specific characteristics are accounted for, Italy is found to be lagging behind the OECD norm, so that the analysis challenges the claims that the limited Italian aid effort is due to binding fiscal constraints.

Radiation transport benchmarks for simple geometries with void regions using the spherical harmonics method

International Nuclear Information System (INIS)

Kobayashi, K.

2009-01-01

In 2001, an international cooperation on the 3D radiation transport benchmarks for simple geometries with void region was performed under the leadership of E. Sartori of OECD/NEA. There were contributions from eight institutions, where 6 contributions were by the discrete ordinate method and only two were by the spherical harmonics method. The 3D spherical harmonics program FFT3 by the finite Fourier transformation method has been improved for this presentation, and benchmark solutions for the 2D and 3D simple geometries with void region by the FFT2 and FFT3 are given showing fairly good accuracy. (authors)

Productivity changes in OECD healthcare systems: bias-corrected Malmquist productivity approach.

Science.gov (United States)

Kim, Younhee; Oh, Dong-Hyun; Kang, Minah

2016-10-01

This study evaluates productivity changes in the healthcare systems of 30 Organization for Economic Co-operation and Development (OECD) countries over the 2002-2012 periods. The bootstrapped Malmquist approach is used to estimate bias-corrected indices of healthcare performance in productivity, efficiency and technology by modifying the original distance functions. Two inputs (health expenditure and school life expectancy) and two outputs (life expectancy at birth and infant mortality rate) are used to calculate productivity growth. There are no perceptible trends in productivity changes over the 2002-2012 periods, but positive productivity improvement has been noticed for most OECD countries. The result also informs considerable variations in annual productivity scores across the countries. Average annual productivity growth is evenly yielded by efficiency and technical changes, but both changes run somewhat differently across the years. The results of this study assert that policy reforms in OECD countries have improved productivity growth in healthcare systems over the past decade. Countries that lag behind in productivity growth should benchmark peer countries' practices to increase performance by prioritizing an achievable trajectory based on socioeconomic conditions. For example, relatively inefficient countries in this study indicate higher income inequality, corresponding to inequality and health outcomes studies. Although income inequality and globalization are not direct measures to estimate healthcare productivity in this study, these issues could be latent factors to explain cross-country healthcare productivity for future research. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

IRPhEP-handbook, International Handbook of Evaluated Reactor Physics Benchmark Experiments

International Nuclear Information System (INIS)

Sartori, Enrico; Blair Briggs, J.

2008-01-01

experimental series that were performed at 17 different reactor facilities. The Handbook is organized in a manner that allows easy inclusion of additional evaluations, as they become available. Additional evaluations are in progress and will be added to the handbook periodically. Content: FUND - Fundamental; GCR - Gas Cooled (Thermal) Reactor; HWR - Heavy Water Moderated Reactor; LMFR - Liquid Metal Fast Reactor; LWR - Light Water Moderated Reactor; PWR - Pressurized Water Reactor; VVER - VVER Reactor; Evaluations published as drafts 2 - Related Information: International Criticality Safety Benchmark Evaluation Project (ICSBEP); IRPHE/B and W-SS-LATTICE, Spectral Shift Reactor Lattice Experiments; IRPHE-JAPAN, Reactor Physics Experiments carried out in Japan ; IRPHE/JOYO MK-II, JOYO MK-II core management and characteristics database ; IRPhE/RRR-SEG, Reactor Physics Experiments from Fast-Thermal Coupled Facility; IRPHE-SNEAK, KFK SNEAK Fast Reactor Experiments, Primary Documentation ; IRPhE/STEK, Reactor Physics Experiments from Fast-Thermal Coupled Facility ; IRPHE-ZEBRA, AEEW Fast Reactor Experiments, Primary Documentation ; IRPHE-DRAGON-DPR, OECD High Temperature Reactor Dragon Project, Primary Documents; IRPHE-ARCH-01, Archive of HTR Primary Documents ; IRPHE/AVR, AVR High Temperature Reactor Experience, Archival Documentation ; IRPHE-KNK-II-ARCHIVE, KNK-II fast reactor documents, power history and measured parameters; IRPhE/BERENICE, effective delayed neutron fraction measurements ; IRPhE-TAPIRO-ARCHIVE, fast neutron source reactor primary documents, reactor physics experiments. The International Handbook of Evaluated Reactor Physics Benchmark Experiments was prepared by a working party comprised of experienced reactor physics personnel from Belgium, Brazil, Canada, P.R. of China, Germany, Hungary, Japan, Republic of Korea, Russian Federation, Switzerland, United Kingdom, and the United States of America. The IRPhEP Handbook is available to authorised requesters from the

Summary of the OECD/NRC Boiling Water Reactor Turbine Trip Benchmark - Fourth Workshop (BWR-TT4)

International Nuclear Information System (INIS)

2002-01-01

The reference problem chosen for simulation in a BWR is a Turbine Trip transient, which begins with a sudden Turbine Stop Valve (TSV) closure. The pressure oscillation generated in the main steam piping propagates with relatively little attenuation into the reactor core. The induced core pressure oscillation results in dramatic changes of the core void distribution and fluid flow. The magnitude of the neutron flux transient taking place in the BWR core is strongly affected by the initial rate of pressure rise caused by pressure oscillation and has a strong spatial variation. The correct simulation of the power response to the pressure pulse and subsequent void collapse requires a 3-D core modeling supplemented by 1-D simulation of the remainder of the reactor coolant system. A BWR TT benchmark exercise, based on a well-defined problem with complete set of input specifications and reference experimental data, has been proposed for qualification of the coupled 3-D neutron kinetics/thermal-hydraulic system transient codes. Since this kind of transient is a dynamically complex event with reactor variables changing very rapidly, it constitutes a good benchmark problem to test the coupled codes on both levels: neutronics/thermal-hydraulic coupling and core/plant system coupling. Subsequently, the objectives of the proposed benchmark are: comprehensive feedback testing and examination of the capability of coupled codes to analyze complex transients with coupled core/plant interactions by comparison with actual experimental data. The benchmark consists of three separate exercises: Exercise 1 - Power vs. Time Plant System Simulation with Fixed Axial Power Profile Table (Obtained from Experimental Data). Exercise 2 - Coupled 3-D Kinetics/Core Thermal-Hydraulic BC Model and/or 1-D Kinetics Plant System Simulation. Exercise 3 - Best-Estimate Coupled 3-D Core/Thermal-Hydraulic System Modeling. The purpose of this fourth workshop was to present and discuss final results of

The OECD FIRE database

International Nuclear Information System (INIS)

Angner, A.; Berg, H.P.; Roewekamp, M.; Werner, W.; Gauvain, J.

2007-01-01

Realistic modelling of fire scenarios is still difficult due to the scarcity of reliable data needed for deterministic and probabilistic fire safety analysis. Therefore, it has been recognized as highly important to establish a fire event database on an international level. In consequence, several member countries of the Nuclear Energy Agency of the OECD have decided in 2000 to establish the International Fire Data Exchange Project (OECD FIRE) to encourage multilateral co-operation in the collection and analysis of data related to fire events at nuclear power plants. This paper presents the OECD FIRE project objectives, work scope and current status of the OECD FIRE database after 3 years of operation as well as first preliminary statistical insights gained from the collected data. (orig.)

Erosion of a confined stratified layer by a vertical jet – Detailed assessment of a CFD approach against the OECD/NEA PSI benchmark

Energy Technology Data Exchange (ETDEWEB)

Kelm, S., E-mail: s.kelm@fz-juelich.de [Forschungszentrum Jülich GmbH, 52425 Jülich (Germany); Kapulla, R., E-mail: ralf.kapulla@psi.ch [Paul Scherrer Institute, 5232 Villigen PSI (Switzerland); Allelein, H.-J., E-mail: allelein@lrst.rwth-aachen.de [Forschungszentrum Jülich GmbH, 52425 Jülich (Germany); RWTH Aachen University, 52080 Aachen (Germany)

2017-02-15

Highlights: • Systematic of a U-RANS approach, capable to be applied at containment scale. • Validation against measured and derived point-wise and field data. • Validation by means of transported quantities (concentration) but also underlying flow field and turbulent kinetic energy. • U-RANS approach yields in overall consistent and plausible results. • But unexpected difference in SST and k–ε identified for free-stream flow. - Abstract: Recently, a blind CFD benchmark exercise was conducted by the OECD/NEA (2013–2014) based on an experiment in the PANDA facility at the Paul Scherrer Institute (PSI) in Switzerland, investigating the turbulent erosion of a stratified helium rich layer in the upper region of the test vessel by means of a vertical air-helium jet impinging from below. In addition to the ‘classical’ pointwise measurements available for similar experiments conducted in the past, significant additional efforts were spent on the experimental characterization of the underlying flow field and turbulent quantities by means of particle image velocimetry (PIV) for the benchmark. This data is well suited for a detailed assessment of the driving jet flow and its interaction with the stratified layer. Both are essential in order to avoid elimination of different errors, which is possible if validation is performed in a global manner. Different impacts on the simulation results, in particular on the jet profile and on the mixing progress, are discussed in this paper. A systematic validation is carried out based on measured and derived quantities. It is identified that e.g. the mesh resolution in the jet and mixing zone has only a minor impact, while small changes in turbulence modeling strategy or the chosen model constants, like Sc{sub t}, significantly affect the simulation results. Finally, the chosen unsteady RANS model represents mixing process consistently in the transient progression and instantaneous flow variables, while an unexpected

Benchmarking Benchmarks

NARCIS (Netherlands)

D.C. Blitz (David)

2011-01-01

textabstractBenchmarking benchmarks is a bundle of six studies that are inspired by the prevalence of benchmarking in academic finance research as well as in investment practice. Three studies examine if current benchmark asset pricing models adequately describe the cross-section of stock returns.

The International Criticality Safety Benchmark Evaluation Project on the Internet

International Nuclear Information System (INIS)

Briggs, J.B.; Brennan, S.A.; Scott, L.

2000-01-01

The International Criticality Safety Benchmark Evaluation Project (ICSBEP) was initiated in October 1992 by the US Department of Energy's (DOE's) defense programs and is documented in the Transactions of numerous American Nuclear Society and International Criticality Safety Conferences. The work of the ICSBEP is documented as an Organization for Economic Cooperation and Development (OECD) handbook, International Handbook of Evaluated Criticality Safety Benchmark Experiments. The ICSBEP Internet site was established in 1996 and its address is http://icsbep.inel.gov/icsbep. A copy of the ICSBEP home page is shown in Fig. 1. The ICSBEP Internet site contains the five primary links. Internal sublinks to other relevant sites are also provided within the ICSBEP Internet site. A brief description of each of the five primary ICSBEP Internet site links is given

The solution of the LEU and MOX WWER-1000 calculation benchmark with the CARATE - multicell code

International Nuclear Information System (INIS)

Hordosy, G.; Maraczy, Cs.

2000-01-01

Preparations for disposition of weapons grade plutonium in WWER-1000 reactors are in progress. Benchmark: Defined by the Kurchatov Institute (S. Bychkov, M. Kalugin, A. Lazarenko) to assess the applicability of computer codes for weapons grade MOX assembly calculations. Framework: 'Task force on reactor-based plutonium disposition' of OECD Nuclear Energy Agency. (Authors)

Estonia to join OECD / Ella Karapetyan

Index Scriptorium Estoniae

Karapetyan, Ella

2010-01-01

2010. aasta kevadel tehakse otsus Eesti liitumise kohta OECD-ga. Välisminister Urmas Paet ja OECD peasekretär Angel Gurria allkirjastasid Pariisis privileegide ja immuniteetide lepingu. OECD liikmed

ZZ-PBMR-400, OECD/NEA PBMR Coupled Neutronics/Thermal Hydraulics Transient Benchmark - The PBMR-400 Core Design

International Nuclear Information System (INIS)

Reitsma, Frederik

2007-01-01

Description of benchmark: This international benchmark, concerns Pebble-Bed Modular Reactor (PBMR) coupled neutronics/thermal hydraulics transients based on the PBMR-400 MW design. The deterministic neutronics, thermal-hydraulics and transient analysis tools and methods available to design and analyse PBMRs lag, in many cases, behind the state of the art compared to other reactor technologies. This has motivated the testing of existing methods for HTGRs but also the development of more accurate and efficient tools to analyse the neutronics and thermal-hydraulic behaviour for the design and safety evaluations of the PBMR. In addition to the development of new methods, this includes defining appropriate benchmarks to verify and validate the new methods in computer codes. The scope of the benchmark is to establish well-defined problems, based on a common given set of cross sections, to compare methods and tools in core simulation and thermal hydraulics analysis with a specific focus on transient events through a set of multi-dimensional computational test problems. The benchmark exercise has the following objectives: - Establish a standard benchmark for coupled codes (neutronics/thermal-hydraulics) for PBMR design; - Code-to-code comparison using a common cross section library ; - Obtain a detailed understanding of the events and the processes; - Benefit from different approaches, understanding limitations and approximations. Major Design and Operating Characteristics of the PBMR (PBMR Characteristic and Value): Installed thermal capacity: 400 MW(t); Installed electric capacity: 165 MW(e); Load following capability: 100-40-100%; Availability: ≥ 95%; Core configuration: Vertical with fixed centre graphite reflector; Fuel: TRISO ceramic coated U-235 in graphite spheres; Primary coolant: Helium; Primary coolant pressure: 9 MPa; Moderator: Graphite; Core outlet temperature: 900 C.; Core inlet temperature: 500 C.; Cycle type: Direct; Number of circuits: 1; Cycle

Eesti loodab peagi OECD liikmekutset / Sirje Rank

Index Scriptorium Estoniae

Rank, Sirje, 1966-

2010-01-01

OECD on Eesti hindamisel jõudnud lõppjärku, liitumiskutset on oodata maikuus. OECD-le pakub huvi Eesti reformikogemus, e-valitsusega seonduv, oodatud on Eesti seisukohad OECD liitumiskõnelustel Venemaaga. OECD tegevusest

Radiation shielding activities at the OECD/Nuclear Energy Agency

International Nuclear Information System (INIS)

Sartori, Enrico; Vaz, Pedro

2000-01-01

The OECD Nuclear Energy Agency (NEA) has devoted considerable effort over the years to radiation shielding issues. The issues are addressed through international working groups. These activities are carried out in close co-ordination and co-operation with the Radiation Safety Information Computational Center (RSICC). The areas of work include: basic nuclear data activities in support of radiation shielding, computer codes, shipping cask shielding applications, reactor pressure vessel dosimetry, shielding experiments database. The method of work includes organising international code comparison exercises and benchmark studies. Training courses on radiation shielding computer codes are organised regularly including hands-on experience in modelling skills. The scope of the activity covers mainly reactor shields and spent fuel transportation packages, but also fusion neutronics and in particular shielding of accelerators and irradiation facilities. (author)

Spanish participation in the Benchmark of the OECD of CFDs applied to nuclear safety: the test of Tee Junction

International Nuclear Information System (INIS)

Abdelaziz Essa, M. A.; Chiva, S.; Munoz-Cobo, J. L.

2011-01-01

In this paper we show the main results obtained by the groups of the Universities UPV and UJI (GITH-Inter-Universitary Group on Thermal-Hidraulics), in the modeling of the OCDE Benchmark on the T-Junction performed during the year 2010. This benchmark consisted in predicting, using CFD codes the velocity and temperature distributions downstream the junction. Also was considered a important issue the prediction of the velocity and temperature fluctuations, especially the Power Spectral density of the temperature fluctuations. The results obtained in the Benchmark by the GITH group were very good.

Proceedings of the Second Meeting of the OECD-NEA Expert Group on Accident Tolerant Fuels for LWRs, 23-25 September 2014, OECD-NEA HQ

International Nuclear Information System (INIS)

Massara, S.; ); Bragg-Sitton, Shannon; Pasamehmetoglu, K.; Yang, Jae Ho; Dolley, Evan J.; Rebak, Raul B.; Sowder, Andrew; Cheng, Bo; Kurata, Masaki; Van Nieuwenhove, Rudi; Li, R.; McClellan, Ken; Nelson, Andy; Carmack, Jon; Harp, Jason; Finck, Phillip; ); Kakicuhi, K.

2014-09-01

Nieuwenhove, OECD-Halden); 5 - Task Force 3 (Fuel concepts) meeting - 25 September 2014: - The Summary of UO 2 ATF Fuel Development (R. Li, CGN); - Summary on FCM Task Force 3 (Fuel concepts) meeting (J.H. Yang, KAERI); - High Density LWR Fuels (S. Bragg-Sitton, INL); 6 - Expert Group meeting - 25 September 2014: - Overview of NEA related activities (S. Massara, OECD-NEA); - New NEA Expert Group on Multi-Physics, Experimental Data, Benchmark, and Validation - EGMPEBV (Phillip Finck); - Expectation to EGATFL from Japanese industry (K. Kakicuhi, Toshiba)

A CFD benchmarking exercise based on flow mixing in a T-junction

Energy Technology Data Exchange (ETDEWEB)

Smith, B.L., E-mail: brian.smith@psi.ch [Thermal Hydraulics Laboratory, Nuclear Energy and Safety Department, Paul Scherrer Institut, CH-5232 Villigen PSI (Switzerland); Mahaffy, J.H. [Wheelsmith Farm, Spring Mill, PA (United States); Angele, K. [Vattenfall R and D, Älvkarleby (Sweden)

2013-11-15

The paper describes an international benchmarking exercise, sponsored by the OECD Nuclear Energy Agency (NEA), aimed at testing the ability of state-of-the-art computational fluid dynamics (CFD) codes to predict the important fluid flow parameters affecting high-cycle thermal fatigue induced by turbulent mixing in T-junctions. The results from numerical simulations are compared to measured data from an experiment performed at 1:2 scale by Vattenfall Research and Development, Älvkarleby, Sweden. The test data were released only at the end of the exercise making this a truly blind CFD-validation benchmark. Details of the organizational procedures, the experimental set-up and instrumentation, the different modeling approaches adopted, synthesis of results, and overall conclusions and perspectives are presented.

Benchmarking the financial performance of local councils in Ireland

Directory of Open Access Journals (Sweden)

Robbins Geraldine

2016-05-01

Full Text Available It was over a quarter of a century ago that information from the financial statements was used to benchmark the efficiency and effectiveness of local government in the US. With the global adoption of New Public Management ideas, benchmarking practice spread to the public sector and has been employed to drive reforms aimed at improving performance and, ultimately, service delivery and local outcomes. The manner in which local authorities in OECD countries compare and benchmark their performance varies widely. The methodology developed in this paper to rate the relative financial performance of Irish city and county councils is adapted from an earlier assessment tool used to measure the financial condition of small cities in the US. Using our financial performance framework and the financial data in the audited annual financial statements of Irish local councils, we calculate composite scores for each of the thirty-four local authorities for the years 2007–13. This paper contributes composite scores that measure the relative financial performance of local councils in Ireland, as well as a full set of yearly results for a seven-year period in which local governments witnessed significant changes in their financial health. The benchmarking exercise is useful in highlighting those councils that, in relative financial performance terms, are the best/worst performers.

OECD:s multilaterala BEPS-konvention – Ärdubbelbeskattning tillbaka på menyn?OECD:s multilateral BEPS-convention – Is double Taxation back on the menu?

OpenAIRE

Bender, Lars-Ole

2017-01-01

Uppsatsen behandlar OECD:s multilaterala BEPS-konvention för vilken i skrivande stund OECD om några dagar ska hålla en signeringscermoni. Uppsatsen innefattar en redogörelse för bakomliggande traktatsrätt, en redogörelse för konventionen i sig samt hänvisningar till relevant nationell rätt där denna är aktuell för konveentionens tillämpning.

Peculiarity by Modeling of the Control Rod Movement by the Kalinin-3 Benchmark

International Nuclear Information System (INIS)

Nikonov, S. P.; Velkov, K.; Pautz, A.

2010-01-01

The paper presents an important part of the results of the OECD/NEA benchmark transient 'Switching off one main circulation pump at nominal power' analyzed as a boundary condition problem by the coupled system code ATHLET-BIPR-VVER. Some observations and comparisons with measured data for integral reactor parameters are discussed. Special attention is paid on the modeling and comparisons performed for the control rod movement and the reactor power history. (Authors)

RETRAN-3D analysis of the base case and the four extreme cases of the OECD/NRC Peach Bottom 2 Turbine Trip benchmark

International Nuclear Information System (INIS)

Barten, Werner; Coddington, Paul; Ferroukhi, Hakim

2006-01-01

This paper presents the results of RETRAN-3D calculations of the base case and the four extreme cases of phase 3 of the Peach Bottom 2 OECD/NRC Turbine Trip benchmark for coupled thermal-hydraulic and neutronic codes. The PSI-RETRAN-3D model gives good agreement with the measured data of the base case. In addition to the base case, the analysis of the extreme cases provides a further understanding of the reactor behaviour, which is the result of the dynamic coupling of the whole system, i.e., the interaction between the steam line and vessel flows, the pressure, the Doppler, void and control reactivity and power. For the extreme cases without scram the bank of safety relief valves is able to mitigate the effects of the turbine trip for short times. The 3-D nature of the core power distribution has been investigated by analysing the power density of the different thermal-hydraulic channels. In all cases prior to the reactor scram the course of the power is similar in all the channels with differences of the order of a few percent showing that, by and large, the core acts in a coherent manner. At the time of maximum power, the axial power distribution in the different channels is increased at the core centre with respect to the distribution at time zero, by an amount, which is different for the different channels

Coal Consumption and Economic Growth: Panel Cointegration and Causality Evidence from OECD and Non-OECD Countries

Directory of Open Access Journals (Sweden)

Taeyoung Jin

2018-03-01

Full Text Available This paper examines the relationship between coal consumption and economic growth for 30 OECD (Organisation for Economic Co-operation and Development countries and 32 non-OECD countries for 1990–2013 using a multivariate dependent panel analysis. For the analysis, we conducted the common factor defactorization process, unit root test, cointegration test, long-run cointegrating vector, and Granger causality test. Our results suggest the following: First, there is no long-run relationship between coal consumption and economic growth in OECD countries; however, in non-OECD countries, the relationship does exist. Second, excessive coal usage may hinder economic growth in the long run. Lastly, the growth hypothesis (coal consumption affects economic growth positively is supported in the short run for non-OECD countries. As coal consumption has a positive effect on economic growth in the short run and a negative effect in the long run, energy conservation policies may have adverse effects only in the short run. Thus, non-OECD countries should gradually switch their energy mix to become less coal-dependent as they consider climate change. Moreover, a transfer of technology and financial resources from developed to developing countries must be encouraged at a global level.

The International Criticality Safety Benchmark Evaluation Project

International Nuclear Information System (INIS)

Briggs, B. J.; Dean, V. F.; Pesic, M. P.

2001-01-01

In order to properly manage the risk of a nuclear criticality accident, it is important to establish the conditions for which such an accident becomes possible for any activity involving fissile material. Only when this information is known is it possible to establish the likelihood of actually achieving such conditions. It is therefore important that criticality safety analysts have confidence in the accuracy of their calculations. Confidence in analytical results can only be gained through comparison of those results with experimental data. The Criticality Safety Benchmark Evaluation Project (CSBEP) was initiated in October of 1992 by the US Department of Energy. The project was managed through the Idaho National Engineering and Environmental Laboratory (INEEL), but involved nationally known criticality safety experts from Los Alamos National Laboratory, Lawrence Livermore National Laboratory, Savannah River Technology Center, Oak Ridge National Laboratory and the Y-12 Plant, Hanford, Argonne National Laboratory, and the Rocky Flats Plant. An International Criticality Safety Data Exchange component was added to the project during 1994 and the project became what is currently known as the International Criticality Safety Benchmark Evaluation Project (ICSBEP). Representatives from the United Kingdom, France, Japan, the Russian Federation, Hungary, Kazakhstan, Korea, Slovenia, Yugoslavia, Spain, and Israel are now participating on the project In December of 1994, the ICSBEP became an official activity of the Organization for Economic Cooperation and Development - Nuclear Energy Agency's (OECD-NEA) Nuclear Science Committee. The United States currently remains the lead country, providing most of the administrative support. The purpose of the ICSBEP is to: (1) identify and evaluate a comprehensive set of critical benchmark data; (2) verify the data, to the extent possible, by reviewing original and subsequently revised documentation, and by talking with the

Boiling water reactor turbine trip (TT) benchmark. Volume II: Summary Results of Exercise 1

International Nuclear Information System (INIS)

Akdeniz, Bedirhan; Ivanov, Kostadin N.; Olson, Andy M.

2005-06-01

The OECD Nuclear Energy Agency (NEA) completed under US Nuclear Regulatory Commission (NRC) sponsorship a PWR main steam line break (MSLB) benchmark against coupled system three-dimensional (3-D) neutron kinetics and thermal-hydraulic codes. Another OECD/NRC coupled-code benchmark was recently completed for a BWR turbine trip (TT) transient and is the object of the present report. Turbine trip transients in a BWR are pressurisation events in which the coupling between core space-dependent neutronic phenomena and system dynamics plays an important role. The data made available from actual experiments carried out at the Peach Bottom 2 plant make the present benchmark particularly valuable. While defining and coordinating the BWR TT benchmark, a systematic approach and level methodology not only allowed for a consistent and comprehensive validation process, but also contributed to the study of key parameters of pressurisation transients. The benchmark consists of three separate exercises, two initial states and five transient scenarios. The BWR TT Benchmark will be published in four volumes as NEA reports. CD-ROMs will also be prepared and will include the four reports and the transient boundary conditions, decay heat values as a function of time, cross-section libraries and supplementary tables and graphs not published in the paper version. BWR TT Benchmark - Volume I: Final Specifications was issued in 2001 [NEA/NSC/DOC(2001)]. The benchmark team [Pennsylvania State University (PSU) in co-operation with Exelon Nuclear and the NEA] has been responsible for coordinating benchmark activities, answering participant questions and assisting them in developing their models, as well as analysing submitted solutions and providing reports summarising the results for each phase. The benchmark team has also been involved in the technical aspects of the benchmark, including sensitivity studies for the different exercises. Volume II summarises the results for Exercise 1 of the

International Handbook of Evaluated Criticality Safety Benchmark Experiments - ICSBEP (DVD), Version 2013

International Nuclear Information System (INIS)

2013-01-01

The Criticality Safety Benchmark Evaluation Project (CSBEP) was initiated in October of 1992 by the United States Department of Energy. The project quickly became an international effort as scientists from other interested countries became involved. The International Criticality Safety Benchmark Evaluation Project (ICSBEP) became an official activity of the Organisation for Economic Co-operation and Development (OECD) Nuclear Energy Agency (NEA) in 1995. This handbook contains criticality safety benchmark specifications that have been derived from experiments performed at various nuclear critical experiment facilities around the world. The benchmark specifications are intended for use by criticality safety engineers to validate calculational techniques used to establish minimum subcritical margins for operations with fissile material and to determine criticality alarm requirement and placement. Many of the specifications are also useful for nuclear data testing. Example calculations are presented; however, these calculations do not constitute a validation of the codes or cross section data. The evaluated criticality safety benchmark data are given in nine volumes. These volumes span nearly 66,000 pages and contain 558 evaluations with benchmark specifications for 4,798 critical, near critical or subcritical configurations, 24 criticality alarm placement/shielding configurations with multiple dose points for each and 200 configurations that have been categorised as fundamental physics measurements that are relevant to criticality safety applications. New to the Handbook are benchmark specifications for Critical, Bare, HEU(93.2)- Metal Sphere experiments referred to as ORSphere that were performed by a team of experimenters at Oak Ridge National Laboratory in the early 1970's. A photograph of this assembly is shown on the front cover

BWR stability analysis: methodology of the stability analysis and results of PSI for the NEA/NCR benchmark task

International Nuclear Information System (INIS)

Hennig, D.; Nechvatal, L.

1996-09-01

The report describes the PSI stability analysis methodology and the validation of this methodology based on the international OECD/NEA BWR stability benchmark task. In the frame of this work, the stability properties of some operation points of the NPP Ringhals 1 have been analysed and compared with the experimental results. (author) figs., tabs., 45 refs

Mixed-oxide (MOX) fuel performance benchmark. Summary of the results for the PRIMO MOX rod BD8

International Nuclear Information System (INIS)

Ott, L.J.; Sartori, E.; Costa, A.; ); Sobolev, V.; Lee, B-H.; Alekseev, P.N.; Shestopalov, A.A.; Mikityuk, K.O.; Fomichenko, P.A.; Shatrova, L.P.; Medvedev, A.V.; Bogatyr, S.M.; Khvostov, G.A.; Kuznetsov, V.I.; Stoenescu, R.; Chatwin, C.P.

2009-01-01

The OECD/NEA Nuclear Science Committee has established an Expert Group that deals with the status and trends of reactor physics, nuclear fuel performance, and fuel cycle issues related to the disposition of weapons-grade plutonium as MOX fuel. The activities of the NEA Expert Group on Reactor-based Plutonium Disposition are carried out in close cooperation with the NEA Working Party on Scientific Issues in Reactor Systems (WPRS). A major part of these activities includes benchmark studies. This report describes the results of the PRIMO rod BD8 benchmark exercise, the second benchmark by the TFRPD relative to MOX fuel behaviour. The corresponding PRIMO experimental data have been released, compiled and reviewed for the International Fuel Performance Experiments (IFPE) database. The observed ranges (as noted in the text) in the predicted thermal and FGR responses are reasonable given the variety and combination of thermal conductivity and FGR models employed by the benchmark participants with their respective fuel performance codes

3-D extension C5G7 MOX benchmark results using PARTISN

Energy Technology Data Exchange (ETDEWEB)

Dahl, J.A. [Los Alamos National Laboratory, CCS-4 Transport Methods Group, Los Alamos, NM (United States)

2005-07-01

We have participated in the Expert Group of 3-D Radiation Transport Benchmarks' proposed 3-dimensional Extension C5G7 MOX problems using the discrete ordinate transport code PARTISN. The computational mesh was created using the FRAC-IN-THE-BOX code, which produces a volume fraction Cartesian mesh from combinatorial geometry descriptions. k{sub eff} eigenvalues, maximum pin powers, and average fuel assembly powers are reported and compared to a benchmark quality Monte Carlo solution. We also present a two dimensional mesh convergence study examining the affects of using volume fractions to approximate the water-pin cell interface. It appears that the control rod pin cell must be meshed twice as fine as a fuel pin cell in order to achieve the same spatial error when using the volume fraction method to define water channel-pin cell interfaces. It is noted that the previous PARTISN results provided to the OECD/NEA Expert Group on 3-dimensional Radiation Benchmarks contained a cross section error, and therefore should be disregarded.

3-D extension C5G7 MOX benchmark results using PARTISN

International Nuclear Information System (INIS)

Dahl, J.A.

2005-01-01

We have participated in the Expert Group of 3-D Radiation Transport Benchmarks' proposed 3-dimensional Extension C5G7 MOX problems using the discrete ordinate transport code PARTISN. The computational mesh was created using the FRAC-IN-THE-BOX code, which produces a volume fraction Cartesian mesh from combinatorial geometry descriptions. k eff eigenvalues, maximum pin powers, and average fuel assembly powers are reported and compared to a benchmark quality Monte Carlo solution. We also present a two dimensional mesh convergence study examining the affects of using volume fractions to approximate the water-pin cell interface. It appears that the control rod pin cell must be meshed twice as fine as a fuel pin cell in order to achieve the same spatial error when using the volume fraction method to define water channel-pin cell interfaces. It is noted that the previous PARTISN results provided to the OECD/NEA Expert Group on 3-dimensional Radiation Benchmarks contained a cross section error, and therefore should be disregarded

Benchmarking

OpenAIRE

Meylianti S., Brigita

1999-01-01

Benchmarking has different meaning to different people. There are five types of benchmarking, namely internal benchmarking, competitive benchmarking, industry / functional benchmarking, process / generic benchmarking and collaborative benchmarking. Each type of benchmarking has its own advantages as well as disadvantages. Therefore it is important to know what kind of benchmarking is suitable to a specific application. This paper will discuss those five types of benchmarking in detail, includ...

Reserve requirement systems in OECD countries

OpenAIRE

Yueh-Yun C. O’Brien

2007-01-01

This paper compares the reserve requirements of OECD countries. Reserve requirements are the minimum percentages or amounts of liabilities that depository institutions are required to keep in cash or as deposits with their central banks. To facilitate monetary policy implementation, twenty-four of the thirty OECD countries impose reserve requirements to influence their banking systems’ demand for liquidity. These include twelve OECD countries that are also members of the European Economic and...

The Monte Carlo performance benchmark test - AIMS, specifications and first results

Energy Technology Data Exchange (ETDEWEB)

Hoogenboom, J. Eduard, E-mail: j.e.hoogenboom@tudelft.nl [Faculty of Applied Sciences, Delft University of Technology (Netherlands); Martin, William R., E-mail: wrm@umich.edu [Nuclear Engineering and Radiological Sciences, University of Michigan, Ann Arbor, MI (United States); Petrovic, Bojan, E-mail: Bojan.Petrovic@gatech.edu [Nuclear and Radiological Engineering, Georgia Institute of Technology, Atlanta, GA (United States)

2011-07-01

The Monte Carlo performance benchmark for detailed power density calculation in a full-size reactor core is organized under the auspices of the OECD NEA Data Bank. It aims at monitoring over a range of years the increase in performance, measured in terms of standard deviation and computer time, of Monte Carlo calculation of the power density in small volumes. A short description of the reactor geometry and composition is discussed. One of the unique features of the benchmark exercise is the possibility to upload results from participants at a web site of the NEA Data Bank which enables online analysis of results and to graphically display how near we are at the goal of doing a detailed power distribution calculation with acceptable statistical uncertainty in an acceptable computing time. First results are discussed which show that 10 to 100 billion histories must be simulated to reach a standard deviation of a few percent in the estimated power of most of the requested the fuel zones. Even when using a large supercomputer, a considerable speedup is still needed to reach the target of 1 hour computer time. An outlook is given of what to expect from this benchmark exercise over the years. Possible extensions of the benchmark for specific issues relevant in current Monte Carlo calculation for nuclear reactors are also discussed. (author)

The Monte Carlo performance benchmark test - AIMS, specifications and first results

International Nuclear Information System (INIS)

Hoogenboom, J. Eduard; Martin, William R.; Petrovic, Bojan

2011-01-01

The Monte Carlo performance benchmark for detailed power density calculation in a full-size reactor core is organized under the auspices of the OECD NEA Data Bank. It aims at monitoring over a range of years the increase in performance, measured in terms of standard deviation and computer time, of Monte Carlo calculation of the power density in small volumes. A short description of the reactor geometry and composition is discussed. One of the unique features of the benchmark exercise is the possibility to upload results from participants at a web site of the NEA Data Bank which enables online analysis of results and to graphically display how near we are at the goal of doing a detailed power distribution calculation with acceptable statistical uncertainty in an acceptable computing time. First results are discussed which show that 10 to 100 billion histories must be simulated to reach a standard deviation of a few percent in the estimated power of most of the requested the fuel zones. Even when using a large supercomputer, a considerable speedup is still needed to reach the target of 1 hour computer time. An outlook is given of what to expect from this benchmark exercise over the years. Possible extensions of the benchmark for specific issues relevant in current Monte Carlo calculation for nuclear reactors are also discussed. (author)

VENUS-2 MOX Core Benchmark: Results of ORNL Calculations Using HELIOS-1.4 - Revised Report

Energy Technology Data Exchange (ETDEWEB)

Ellis, RJ

2001-06-01

The Task Force on Reactor-Based Plutonium Disposition (TFRPD) was formed by the Organization for Economic Cooperation and Development/Nuclear Energy Agency (OECD/NEA) to study reactor physics, fuel performance, and fuel cycle issues related to the disposition of weapons-grade (WG) plutonium as mixed-oxide (MOX) reactor fuel. To advance the goals of the TFRPD, 10 countries and 12 institutions participated in a major TFRPD activity: a blind benchmark study to compare code calculations to experimental data for the VENUS-2 MOX core at SCK-CEN in Mol, Belgium. At Oak Ridge National Laboratory, the HELIOS-1.4 code system was used to perform the comprehensive study of pin-cell and MOX core calculations for the VENUS-2 MOX core benchmark study.

Energy balances of OECD countries 1970/1982

International Nuclear Information System (INIS)

Anon.

1984-01-01

The present volume provides standardized energy balance sheets expressed in a common unit of tons of oil equivalent for all OECD Countries. It covers the years 1970 to 1982 year by year and includes many revisions and additions to data previously published. The balances in the present volume are based on data published in OECD Energy Statistics 1971-1981 and OECD Energy Statistics 1981-1982. Tables for each OECD Country include production, import, export, consumption by the different industries, transportation, agriculture, residential sector of the different energies: solid fuels, petroleum, gas, nuclear power and hydroelectricity [fr

Estonia ready to contribute to OECD / Ella Karapetyan

Index Scriptorium Estoniae

Karapetyan, Ella

2010-01-01

Eestis visiidil viibinud OECD peasekretär Angel Gurria kohtus president Toomas Hendrik Ilvese ja peaminister Andrus Ansipiga. Kohtumistel räägiti Eesti liitumisest OECD-ga. Andrus Ansip ja Angel Gurria kirjutasid alla Eesti ühinemislepingule OECD-ga

OECD/NEA data bank scientific and integral experiments databases in support of knowledge preservation and transfer

International Nuclear Information System (INIS)

Sartori, E.; Kodeli, I.; Mompean, F.J.; Briggs, J.B.; Gado, J.; Hasegawa, A.; D'hondt, P.; Wiesenack, W.; Zaetta, A.

2004-01-01

The OECD/Nuclear Energy Data Bank was established by its member countries as an institution to allow effective sharing of knowledge and its basic underlying information and data in key areas of nuclear science and technology. The activities as regards preserving and transferring knowledge consist of the: 1) Acquisition of basic nuclear data, computer codes and experimental system data needed over a wide range of nuclear and radiation applications; 2) Independent verification and validation of these data using quality assurance methods, adding value through international benchmark exercises, workshops and meetings and by issuing relevant reports with conclusions and recommendations, as well as by organising training courses to ensure their qualified and competent use; 3) Dissemination of the different products to authorised establishments in member countries and collecting and integrating user feedback. Of particular importance has been the establishment of basic and integral experiments databases and the methodology developed with the aim of knowledge preservation and transfer. Databases established thus far include: 1) IRPhE - International Reactor Physics Experimental Benchmarks Evaluations, 2) SINBAD - a radiation shielding experiments database (nuclear reactors, fusion neutronics and accelerators), 3) IFPE - International Fuel Performance Benchmark Experiments Database, 4) TDB - The Thermochemical Database Project, 5) ICSBE - International Nuclear Criticality Safety Benchmark Evaluations, 6) CCVM - CSNI Code Validation Matrix of Thermal-hydraulic Codes for LWR LOCA and Transients. This paper will concentrate on knowledge preservation and transfer concepts and methods related to some of the integral experiments and TDB. (author)

Simulation of the OECD Main-Steam-Line-Break Benchmark Exercise 3 Using the Coupled RELAP5/PANTHER Codes

International Nuclear Information System (INIS)

Schneidesch, Christophe R.; Zhang Jinzhao

2004-01-01

The RELAP5 best-estimate thermal-hydraulic system code has been coupled with the PANTHER three-dimensional neutron kinetics code via the TALINK dynamic data exchange control and processing tool. The coupled RELAP5/PANTHER code package has been qualified and will be used at Tractebel Engineering (TE) for analyzing asymmetric pressurized water reactor (PWR) accidents with strong core-system interactions. The Organization for Economic Cooperation and Development/U.S. Nuclear Regulatory Commission PWR main-steam-line-break benchmark problem was analyzed as part of the qualification efforts to demonstrate the capability of the coupled code package of simulating such transients. This paper reports the main results of TE's contribution to the benchmark Exercise 3

The OECD expert meeting on ecotoxicology and environmental fate--towards the development of improved OECD guidelines for the testing of nanomaterials.

Science.gov (United States)

Kühnel, Dana; Nickel, Carmen

2014-02-15

On behalf of the OECD Working Party on Manufactured Nanomaterials (WPMN) an expert meeting on ecotoxicology and environmental fate of nanomaterials (NMs) took place in January 2013 in Berlin. At this meeting experts from science, industry and regulatory bodies discussed the applicability of OECD test guidelines (TGs) for chemicals to nanomaterials. The objective was to discuss the current state of the relevant science and provide recommendations to the OECD WPMN on (1) the need for updating current OECD TGs and the need for developing new ones specific to nanomaterials; and (2) guidance needed for the appropriate and valid testing of environmental fate and ecotoxicity endpoints for NMs. Experts at the workshop agreed that the majority of the OECD TG for chemicals were generally applicable for the testing of NM, with the exception of TG 105 (water solubility) and 106 (adsorption-desorption). Additionally, the workshop also highlighted considerations when conducting OECD chemical TG on nanomaterials (e.g., sample preparation, dispersion, analysis, dosimetry and characterisation). These considerations will lead to the future development of proposals for new TG and guidance documents (GDs) to ensure that OECD TG give meaningful, repeatable, and accurate results when used for nanomaterials. This report provides a short overview of topics discussed during the meeting and the main outcomes. A more detailed report of the workshop will become available through the OECD, however, due to the urgency of having OECD TG relevant for nanomaterials, this brief report is being shared with the scientific community through this communication. Copyright © 2013. Published by Elsevier B.V.

The OECD expert meeting on ecotoxicology and environmental fate — Towards the development of improved OECD guidelines for the testing of nanomaterials

International Nuclear Information System (INIS)

Kühnel, Dana; Nickel, Carmen

2014-01-01

On behalf of the OECD Working Party on Manufactured Nanomaterials (WPMN) an expert meeting on ecotoxicology and environmental fate of nanomaterials (NMs) took place in January 2013 in Berlin. At this meeting experts from science, industry and regulatory bodies discussed the applicability of OECD test guidelines (TGs) for chemicals to nanomaterials. The objective was to discuss the current state of the relevant science and provide recommendations to the OECD WPMN on (1) the need for updating current OECD TGs and the need for developing new ones specific to nanomaterials; and (2) guidance needed for the appropriate and valid testing of environmental fate and ecotoxicity endpoints for NMs. Experts at the workshop agreed that the majority of the OECD TG for chemicals were generally applicable for the testing of NM, with the exception of TG 105 (water solubility) and 106 (adsorption-desorption). Additionally, the workshop also highlighted considerations when conducting OECD chemical TG on nanomaterials (e.g., sample preparation, dispersion, analysis, dosimetry and characterisation). These considerations will lead to the future development of proposals for new TG and guidance documents (GDs) to ensure that OECD TG give meaningful, repeatable, and accurate results when used for nanomaterials. This report provides a short overview of topics discussed during the meeting and the main outcomes. A more detailed report of the workshop will become available through the OECD, however, due to the urgency of having OECD TG relevant for nanomaterials, this brief report is being shared with the scientific community through this communication. - Highlights: • OECD test guidelines (TGs) were developed for the testing of conventional chemicals. • Need for discussion on applicability of current TGs to nanomaterials • An expert meeting addressing this issue was held. • The focus was on TGs covering ecotoxicology and environmental fate. • Recommendations for updating current OECD

Analysis of the impact of correlated benchmark experiments on the validation of codes for criticality safety analysis

International Nuclear Information System (INIS)

Bock, M.; Stuke, M.; Behler, M.

2013-01-01

The validation of a code for criticality safety analysis requires the recalculation of benchmark experiments. The selected benchmark experiments are chosen such that they have properties similar to the application case that has to be assessed. A common source of benchmark experiments is the 'International Handbook of Evaluated Criticality Safety Benchmark Experiments' (ICSBEP Handbook) compiled by the 'International Criticality Safety Benchmark Evaluation Project' (ICSBEP). In order to take full advantage of the information provided by the individual benchmark descriptions for the application case, the recommended procedure is to perform an uncertainty analysis. The latter is based on the uncertainties of experimental results included in most of the benchmark descriptions. They can be performed by means of the Monte Carlo sampling technique. The consideration of uncertainties is also being introduced in the supplementary sheet of DIN 25478 'Application of computer codes in the assessment of criticality safety'. However, for a correct treatment of uncertainties taking into account the individual uncertainties of the benchmark experiments is insufficient. In addition, correlations between benchmark experiments have to be handled correctly. For example, these correlations can arise due to different cases of a benchmark experiment sharing the same components like fuel pins or fissile solutions. Thus, manufacturing tolerances of these components (e.g. diameter of the fuel pellets) have to be considered in a consistent manner in all cases of the benchmark experiment. At the 2012 meeting of the Expert Group on 'Uncertainty Analysis for Criticality Safety Assessment' (UACSA) of the OECD/NEA a benchmark proposal was outlined that aimed for the determination of the impact on benchmark correlations on the estimation of the computational bias of the neutron multiplication factor (k eff ). The analysis presented here is based on this proposal. (orig.)

OECD sarjab II samba peatamist / Erik Müürsepp

Index Scriptorium Estoniae

Müürsepp, Erik

2009-01-01

OECD peab II pensionisamba maksete peatamist taunitavaks. OECD dokumendist, milles vaadeldakse praegu kriisiolukorda sattunud riikide käitumist pensionisüsteemi kujundamisel. Sotsiaalminister Hanno Pevkuri arvamus OECD soovituste kohta

International handbook of evaluated criticality safety benchmark experiments

International Nuclear Information System (INIS)

2010-01-01

The Criticality Safety Benchmark Evaluation Project (CSBEP) was initiated in October of 1992 by the United States Department of Energy. The project quickly became an international effort as scientists from other interested countries became involved. The International Criticality Safety Benchmark Evaluation Project (ICSBEP) became an official activity of the Organization for Economic Cooperation and Development - Nuclear Energy Agency (OECD-NEA) in 1995. This handbook contains criticality safety benchmark specifications that have been derived from experiments performed at various nuclear critical facilities around the world. The benchmark specifications are intended for use by criticality safety engineers to validate calculational techniques used to establish minimum subcritical margins for operations with fissile material and to determine criticality alarm requirement and placement. Many of the specifications are also useful for nuclear data testing. Example calculations are presented; however, these calculations do not constitute a validation of the codes or cross section data. The evaluated criticality safety benchmark data are given in nine volumes. These volumes span over 55,000 pages and contain 516 evaluations with benchmark specifications for 4,405 critical, near critical, or subcritical configurations, 24 criticality alarm placement / shielding configurations with multiple dose points for each, and 200 configurations that have been categorized as fundamental physics measurements that are relevant to criticality safety applications. Experiments that are found unacceptable for use as criticality safety benchmark experiments are discussed in these evaluations; however, benchmark specifications are not derived for such experiments (in some cases models are provided in an appendix). Approximately 770 experimental configurations are categorized as unacceptable for use as criticality safety benchmark experiments. Additional evaluations are in progress and will be

Climate change policies in the OECD

International Nuclear Information System (INIS)

Staahle, C.

1993-01-01

The author focuses on the United Nations Conference on the Environment and Development (UNCED), held in 1992 in Rio de Janeiro, Brasil, and on carbon taxation. At the UNCED the Framework Convention on Climate Change was signed by 154 countries. This convention is intended to guide policy makers, and takes into account the great differences that exist between countries with regard to their ability to cater and pay for greenhouse gas emission reductions. It is pointed out that since 1985 the share of CO 2 emissions from non-OECD countries has exceeded that of OECD countries. An overview is given of stated OECD targets on CO 2 emission reductions. The global impact of reductions in OECD countries alone will be limited: if all targets are met, global emissions will be growing with 19% in the coming ten years, compared to 22% in a 'business-as-usual' scenario. It was noted that only very few OECD countries have developed action plans or implemented carbon taxes that could make their targets attainable. Details were given on carbon taxes now in place. It is concluded that no progress will be made if developing countries are not included in climate change policies. Also much work remains to be done in developed countries to meet emission reduction or stabilization targets. 3 figs., 4 tabs

OECD Reviews of School Resources: Kazakhstan

Science.gov (United States)

Pons, Anna; Amoroso, Jeremie; Herczynski, Jan; Kheyfets, Igor; Lockheed, Marlaine; Santiago, Paulo

2015-01-01

This joint OECD-World Bank report for Kazakhstan forms part of the OECD Review of Policies to Improve the Effectiveness of Resource Use in Schools. The purpose of the Review is to explore how resources can be governed, distributed, utilised and managed to improve the quality, equity and efficiency of school education. School resources are…

ICSBEP-2007, International Criticality Safety Benchmark Experiment Handbook

International Nuclear Information System (INIS)

Blair Briggs, J.

2007-01-01

1 - Description: The Critically Safety Benchmark Evaluation Project (CSBEP) was initiated in October of 1992 by the United Sates Department of Energy. The project quickly became an international effort as scientist from other interested countries became involved. The International Criticality Safety Benchmark Evaluation Project (ICSBEP) is now an official activity of the Organization of Economic Cooperation and Development - Nuclear Energy Agency (OECD-NEA). This handbook contains criticality safety benchmark specifications that have been derived from experiments that were performed at various nuclear critical facilities around the world. The benchmark specifications are intended for use by criticality safety engineers to validate calculational techniques used to establish minimum subcritical margins for operations with fissile material. The example calculations presented do not constitute a validation of the codes or cross section data. The work of the ICSBEP is documented as an International Handbook of Evaluated Criticality Safety Benchmark Experiments. Currently, the handbook spans over 42,000 pages and contains 464 evaluations representing 4,092 critical, near-critical, or subcritical configurations and 21 criticality alarm placement/shielding configurations with multiple dose points for each and 46 configurations that have been categorized as fundamental physics measurements that are relevant to criticality safety applications. The handbook is intended for use by criticality safety analysts to perform necessary validations of their calculational techniques and is expected to be a valuable tool for decades to come. The ICSBEP Handbook is available on DVD. You may request a DVD by completing the DVD Request Form on the internet. Access to the Handbook on the Internet requires a password. You may request a password by completing the Password Request Form. The Web address is: http://icsbep.inel.gov/handbook.shtml 2 - Method of solution: Experiments that are found

PREMIUM - Benchmark on the quantification of the uncertainty of the physical models in the system thermal-hydraulic codes

International Nuclear Information System (INIS)

Skorek, Tomasz; Crecy, Agnes de

2013-01-01

PREMIUM (Post BEMUSE Reflood Models Input Uncertainty Methods) is an activity launched with the aim to push forward the methods of quantification of physical models uncertainties in thermal-hydraulic codes. It is endorsed by OECD/NEA/CSNI/WGAMA. The benchmark PREMIUM is addressed to all who applies uncertainty evaluation methods based on input uncertainties quantification and propagation. The benchmark is based on a selected case of uncertainty analysis application to the simulation of quench front propagation in an experimental test facility. Application to an experiment enables evaluation and confirmation of the quantified probability distribution functions on the basis of experimental data. The scope of the benchmark comprises a review of the existing methods, selection of potentially important uncertain input parameters, preliminary quantification of the ranges and distributions of the identified parameters, evaluation of the probability density function using experimental results of tests performed on FEBA test facility and confirmation/validation of the performed quantification on the basis of blind calculation of Reflood 2-D PERICLES experiment. (authors)

Performance assessment of new neutron cross section libraries using MCNP code and some critical benchmarks

International Nuclear Information System (INIS)

Bakkari, B El; Bardouni, T El.; Erradi, L.; Chakir, E.; Meroun, O.; Azahra, M.; Boukhal, H.; Khoukhi, T El.; Htet, A.

2007-01-01

Full text: New releases of nuclear data files made available during the few recent years. The reference MCNP5 code (1) for Monte Carlo calculations is usually distributed with only one standard nuclear data library for neutron interactions based on ENDF/B-VI. The main goal of this work is to process new neutron cross sections libraries in ACE continuous format for MCNP code based on the most recent data files recently made available for the scientific community : ENDF/B-VII.b2, ENDF/B-VI (release 8), JEFF3.0, JEFF-3.1, JENDL-3.3 and JEF2.2. In our data treatment, we used the modular NJOY system (release 99.9) (2) in conjunction with its most recent upadates. Assessment of the processed point wise cross sections libraries performances was made by means of some criticality prediction and analysis of other integral parameters for a set of reactor benchmarks. Almost all the analyzed benchmarks were taken from the international handbook of Evaluated criticality safety benchmarks experiments from OECD (3). Some revised benchmarks were taken from references (4,5). These benchmarks use Pu-239 or U-235 as the main fissionable materiel in different forms, different enrichments and cover various geometries. Monte Carlo calculations were performed in 3D with maximum details of benchmark description and the S(α,β) cross section treatment was adopted in all thermal cases. The resulting one standard deviation confidence interval for the eigenvalue is typically +/-13% to +/-20 pcm [fr

OECD - kvaliteedimärk kogu riigile / Keit Kasemets

Index Scriptorium Estoniae

Kasemets, Keit

2010-01-01

Majanduskoostöö ja Arengu Organisatsiooni (OECD) liikme staatus loob Eesti majanduspoliitika ja teiste oluliste poliitikate arendamisel uusi võimalusi. OECD faktides, praegused liikmesriigid ja nende liitumisaeg

OECD/SERENA Project Report. Summary and Conclusions

International Nuclear Information System (INIS)

2015-02-01

The OECD/SERENA Project Integration Report summarises the outcome of a broad range of activities conducted in the framework of the Organisation for Economic Cooperation and Development (OECD) Steam Explosion Resolution for Nuclear Applications Project (OECD/SERENA) to address remaining issues on fuel-coolant interaction (FCI) mechanisms and their effect on ex-vessel steam explosion energetics. The scope the OECD/SERENA project was to resolve uncertainties in the remaining issues and to bring the code capabilities to an adequate level for use in reactor safety applications. This scope was accomplished with the completion of three major tasks: (1) an experimental programme consisting of two sets of steam explosion experiments in two different facilities; (2) an analytical programme consisting of pre-test calculations in support of test specifications and post-test calculations in support of data analysis and code assessment, and also a code benchmark exercise; and (3) a reactor calculation exercise repeating the one performed in the framework of the CSNI/WGAMA SERENA activity performed from 2001 to 2006 (also referred to as SERENA Phase I, published as CSNI/R(2007)/11). The objectives of the experimental programme were to provide data: (1) to clarify the explosion behaviour of prototypic corium melts and for validation of steam explosion models for prototypic materials; and (2) for steam explosion behaviour in two different geometries to verify the geometrical extrapolation capabilities of the codes. These objectives were to be accomplished by conducting complementary sets of six experiments each at two different facilities: KROTOS at the Commissariat l'Energie Atomique et aux Energies Alternatives (CEA) in Cadarache, France, representing one-dimensional FCI configuration involving nominally 5 kilograms of prototypic corium melt, and TROI at Korea Atomic Energy Research Institute (KAERI) in Daejeon, Korea, representing multi-dimensional FCI configuration

Activities of OECD NEA CSNI PWG3

International Nuclear Information System (INIS)

Miller, A.

1998-01-01

Activities of OECD NEA are connected with IAEA-IWG LMNPP, IAEA Nuclear safety, CEC-JRC, CEC-DG XI, CEC-DG XII and utilities UNIPEDE and WANO. The Committee on the Safety of Nuclear Installations (CSNI) acts through working groups on Fuel Cycle safety; Operating Experiences and Human Factors; Coolant System Behaviour; Integrity of Components and Structures; Confinement of Accidental Radioactive Releases and Risk Assessment. Korea, Mexico, Hungary and Czech Republic are now members of OECD NEA, and the non OECD Countries like Russia, Ukraine, Slovakia, Lithuania can participate in workshops but not in regular committee meetings

RETRAN-3D Analysis Of The OECD/NRC Peach Bottom 2 Turbine Trip Benchmark

International Nuclear Information System (INIS)

Barten, W.; Coddington, P.

2003-01-01

This paper presents the PSI results on the different Phases of the Peach Bottom BWR Turbine Trip Benchmark using the RETRAN-3D code. In the first part of the paper, the analysis of Phase 1 is presented, in which the system pressure is predicted based on a pre-defined core power distribution. These calculations demonstrate the importance of accurate modelling of the non-equilibrium effects within the steam separator region. In the second part, a selection of the RETRAN-3D results for Phase 2 are given, where the power is predicted using a 3-D core with pre-defined core flow and pressure boundary conditions. A comparison of calculations using the different (Benchmark-specified) boundary conditions illustrates the sensitivity of the power maximum on the various resultant system parameters. In the third part of the paper, the results of the Phase 3 calculation are presented. This phase, which is a combination of the analytical work of Phases 1 and 2, gives good agreement with the measured data. The coupling of the pressure and flow oscillations in the steam line, the mass balance in the core, the (void) reactivity and the core power are all discussed. It is shown that the reactivity effects resulting from the change in the core void can explain the overall behaviour of the transient prior to the reactor scram. The time-dependent, normalized power for different thermal-hydraulic channels in the core is discussed in some detail. Up to the time of reactor scram, the power change was similar in all channels, with differences of the order of only a few percent. The axial shape of the channel powers at the time of maximum (overall) power increased in the core centre (compared with the shape at time zero). These changes occur as a consequence of the relative change in the channel void, which is largest in the region of the onset of boiling, and the influence on the different fuel assemblies of the complex ring pattern of the control rods. (author)

RETRAN-3D Analysis Of The OECD/NRC Peach Bottom 2 Turbine Trip Benchmark

Energy Technology Data Exchange (ETDEWEB)

Barten, W.; Coddington, P

2003-03-01

This paper presents the PSI results on the different Phases of the Peach Bottom BWR Turbine Trip Benchmark using the RETRAN-3D code. In the first part of the paper, the analysis of Phase 1 is presented, in which the system pressure is predicted based on a pre-defined core power distribution. These calculations demonstrate the importance of accurate modelling of the non-equilibrium effects within the steam separator region. In the second part, a selection of the RETRAN-3D results for Phase 2 are given, where the power is predicted using a 3-D core with pre-defined core flow and pressure boundary conditions. A comparison of calculations using the different (Benchmark-specified) boundary conditions illustrates the sensitivity of the power maximum on the various resultant system parameters. In the third part of the paper, the results of the Phase 3 calculation are presented. This phase, which is a combination of the analytical work of Phases 1 and 2, gives good agreement with the measured data. The coupling of the pressure and flow oscillations in the steam line, the mass balance in the core, the (void) reactivity and the core power are all discussed. It is shown that the reactivity effects resulting from the change in the core void can explain the overall behaviour of the transient prior to the reactor scram. The time-dependent, normalized power for different thermal-hydraulic channels in the core is discussed in some detail. Up to the time of reactor scram, the power change was similar in all channels, with differences of the order of only a few percent. The axial shape of the channel powers at the time of maximum (overall) power increased in the core centre (compared with the shape at time zero). These changes occur as a consequence of the relative change in the channel void, which is largest in the region of the onset of boiling, and the influence on the different fuel assemblies of the complex ring pattern of the control rods. (author)

OECD environmental performance reviews: United States

Energy Technology Data Exchange (ETDEWEB)

NONE

2006-01-15

This book presents OECD assessments and recommendations regarding the United States' efforts to manage its environment including air, water, nature, and biodiversity; to do this in a sustainable manner; and to do this in co-operation with its global neighbours. In particular, it assesses progress made since 1996, when OECD's previous review on the US was done. 47 figs., 20 tabs.

Nye OECD-retningslinjer for transfer pricing dokumentation

DEFF Research Database (Denmark)

Rossing, Christian Plesner

2015-01-01

er vedtaget, erstatte det nuværende kapitel V om transfer pricing dokumentation i ‘OECD Transfer Pricing Guidelines for Multinational Enterprises and Tax Administrations’. De gældende danske regler for transfer pricing dokumentation baserer sig på de eksisterende OECD-retningslinjer, og det må...

Toward a CFD-grade database addressing LWR containment phenomena

International Nuclear Information System (INIS)

Paladino, Domenico; Andreani, Michele; Zboray, Robert; Dreier, Jörg

2012-01-01

Highlights: ► The SETH-2 PANDA tests have supplied data with CFD-grade on plumes and jets at large-scale. ► The PANDA tests have contributed to the understanding of phenomena with high safety relevance for LWRs. ► The analytical activities related increased confidence in the use of various computational tools for safety analysis. - Abstract: The large-scale, multi-compartment PANDA facility (located at PSI in Switzerland) is one of the state-of-the-art facilities which is continuously upgraded to progressively match the requirements of CFD-grade experiments. Within the OECD/SETH projects, the PANDA facility has been used for the creation of an experimental database on basic containment phenomena e.g. gas mixing, transport, stratification, condensation. In the PANDA tests, these phenomena are driven by large scale plumes or jets. In the paper is presented a selection of the SETH PANDA experimental results. Examples of analytical activities performed at PSI using the GOTHIC, CFX-4 and CFX-5 codes will be used to illustrate how the spatial and temporal resolutions of the measurement grid in PANDA tests are adequate for CFD code (and advanced containment codes) assessment and validation purposes.

OECD ukse avamine tooks siia raha / Harry Tuul

Index Scriptorium Estoniae

Tuul, Harry

2007-01-01

Poola pensionifondid ei taha Eestisse investeerida, sest Eesti ei kuulu Majandusliku Koostöö ja Arengu Organisatsiooni. Vt. samas: OECD liikmeskond; Romet Kreek. OECD ukse avamine tooks siia raha. Kommenteerib Andre Nõmm

OECD/DOE/CEA VVER-1000 Coolant Transient Benchmark. Summary Record of the Third Workshop (V1000-CT3)

International Nuclear Information System (INIS)

2005-01-01

The overall objective of the VVER-1000 coolant transient (V1000CT) benchmark is to assess computer codes used in the safety analysis of VVER power plants, specifically for their use in analysis of reactivity transients in a VVER-1000. The V1000CT benchmark consists of two phases: V1000CT-1 is a simulation of the switching on of one main coolant pump (MCP) when the other three MCPs are in operation, and V1000CT-2 concerns calculation of coolant mixing tests and main steam line break (MSLB) scenarios. Each of the two phases contains three exercises. The reference problem chosen for simulation in Phase 1 is a MCP switching on when the other three main coolant pumps are in operation in a VVER-1000. This event is characterized by rapid increase in the flow through the core resulting in a coolant temperature decrease, which is spatially dependent. This leads to insertion of spatially distributed positive reactivity due to the modelled feedback mechanisms and non-symmetric power distribution. Simulation of the transient requires evaluation of core response from a multi-dimensional perspective (coupled three-dimensional neutronics/core thermal-hydraulics) supplemented by a one-dimensional simulation of the remainder of the reactor coolant system. Three exercises are defined in the framework of Phase 1: a) Exercise 1 - Point kinetics plant simulation; b) Exercise 2 - Coupled 3-D neutronics/core thermal-hydraulics response evaluation; c) Exercise 3 - Best-estimate coupled 3-D core/plant system transient modelling. In addition to the measured (experiment) scenario, extreme calculation scenarios were defined in the frame of Exercise 3 for better testing 3-D neutronics/thermal-hydraulics techniques. The proposals concerned: rod ejection simulations with scram set points at two different power levels. The technical topics presented at this workshop were: Review of the benchmark activities after the 2. Workshop; - Discussion of participant's feedback and introduced modifications

The OECD and Global Governance in Education

Science.gov (United States)

Sellar, Sam; Lingard, Bob

2013-01-01

This review essay discusses the history, evolution and development of the Organisation for Economic Co-operation and Development (OECD) and traces the growing impact of its education work. The essay is in four main sections. The first discusses Carrol and Kellow's "The OECD: A Study of Organizational Adaptation" (Edward Elgar) and…

Education at a Glance 2010: OECD Indicators

Science.gov (United States)

OECD Publishing (NJ1), 2010

2010-01-01

Across OECD countries, governments are seeking policies to make education more effective while searching for additional resources to meet the increasing demand for education. The 2010 edition of "Education at a Glance: OECD Indicators" enables countries to see themselves in the light of other countries' performance. It provides a rich, comparable…

Vabariigi president kohtus OECD peasekretäriga

Index Scriptorium Estoniae

2008-01-01

President Toomas Hendrik Ilves kohtus 12. veebruaril 2008 Tallinnas Majandusliku Koostöö ja Arengu Organisatsiooni (OECD) peasekretäri Angel Gurria'ga, tänades teda panuse eest organisatsiooni laienemispoliitika edendamisel. Ilmunud ka: Meie Kodu 20. veebr. 2008, lk. 3, pealk.: President Ilves kohtus OECD peasekretäriga (Allk. Kristel Peterson)

PHISICS/RELAP5-3D RESULTS FOR EXERCISES II-1 AND II-2 OF THE OECD/NEA MHTGR-350 BENCHMARK

Energy Technology Data Exchange (ETDEWEB)

Strydom, Gerhard [Idaho National Laboratory

2016-03-01

The Idaho National Laboratory (INL) Advanced Reactor Technologies (ART) High-Temperature Gas-Cooled Reactor (HTGR) Methods group currently leads the Modular High-Temperature Gas-Cooled Reactor (MHTGR) 350 benchmark. The benchmark consists of a set of lattice-depletion, steady-state, and transient problems that can be used by HTGR simulation groups to assess the performance of their code suites. The paper summarizes the results obtained for the first two transient exercises defined for Phase II of the benchmark. The Parallel and Highly Innovative Simulation for INL Code System (PHISICS), coupled with the INL system code RELAP5-3D, was used to generate the results for the Depressurized Conduction Cooldown (DCC) (exercise II-1a) and Pressurized Conduction Cooldown (PCC) (exercise II-2) transients. These exercises require the time-dependent simulation of coupled neutronics and thermal-hydraulics phenomena, and utilize the steady-state solution previously obtained for exercise I-3 of Phase I. This paper also includes a comparison of the benchmark results obtained with a traditional system code “ring” model against a more detailed “block” model that include kinetics feedback on an individual block level and thermal feedbacks on a triangular sub-mesh. The higher spatial fidelity that can be obtained by the block model is illustrated with comparisons of the maximum fuel temperatures, especially in the case of natural convection conditions that dominate the DCC and PCC events. Differences up to 125 K (or 10%) were observed between the ring and block model predictions of the DCC transient, mostly due to the block model’s capability of tracking individual block decay powers and more detailed helium flow distributions. In general, the block model only required DCC and PCC calculation times twice as long as the ring models, and it therefore seems that the additional development and calculation time required for the block model could be worth the gain that can be

OECD/DOE/CEA VVER-1000 Coolant Transient Benchmark. Summary Record of the Fourth Workshop (V100-CT4)

International Nuclear Information System (INIS)

2006-01-01

The overall objective of the VVER-1000 coolant transient (V1000CT) benchmark is to assess computer codes used in the safety analysis of VVER power plants, specifically for their use in analysis of reactivity transients in a VVER-1000. The V1000CT benchmark consists of two phases: V1000CT-1 is a simulation of the switching on of one main coolant pump (MCP) when the other three MCPs are in operation, and V1000CT-2 concerns calculation of coolant mixing tests and main steam line break (MSLB) scenarios. Each of the two phases contains three exercises. The reference problem chosen for simulation in Phase 1 is a MCP switching on when the other three main coolant pumps are in operation in a VVER-1000. This event is characterized by rapid increase in the flow through the core resulting in a coolant temperature decrease, which is spatially dependent. This leads to insertion of spatially distributed positive reactivity due to the modelled feedback mechanisms and non-symmetric power distribution. Simulation of the transient requires evaluation of core response from a multi-dimensional perspective (coupled three-dimensional neutronics/core thermal-hydraulics) supplemented by a one-dimensional simulation of the remainder of the reactor coolant system. Three exercises are defined in the framework of Phase 1: a) Exercise 1 - Point kinetics plant simulation; b) Exercise 2 - Coupled 3-D neutronics/core thermal-hydraulics response evaluation; c) Exercise 3 - Best-estimate coupled 3-D core/plant system transient modelling. In addition to the measured (experiment) scenario, extreme calculation scenarios were defined in the frame of Exercise 3 for better testing 3-D neutronics/thermal-hydraulics techniques. The proposals concerned: rod ejection simulations with scram set points at two different power levels. Since the previous coupled code benchmarks indicated that further development of the mixing computation models in the integrated codes is necessary, a coolant mixing experiment and

OECD Reviews of School Resources : Austria 2016

OpenAIRE

Theisens, Henno

2016-01-01

The effective use of school resources is a policy priority across OECD countries. The OECD Reviews of School Resources explore how resources can be governed, distributed, utilised and managed to improve the quality, equity and efficiency of school education. The series considers four types of resources: financial resources, such as public funding of individual schools; human resources, such as teachers, school leaders and education administrators; physical resources, such as location, buildin...

Self-benchmarking Guide for Cleanrooms: Metrics, Benchmarks, Actions

Energy Technology Data Exchange (ETDEWEB)

Mathew, Paul; Sartor, Dale; Tschudi, William

2009-07-13

This guide describes energy efficiency metrics and benchmarks that can be used to track the performance of and identify potential opportunities to reduce energy use in laboratory buildings. This guide is primarily intended for personnel who have responsibility for managing energy use in existing laboratory facilities - including facilities managers, energy managers, and their engineering consultants. Additionally, laboratory planners and designers may also use the metrics and benchmarks described in this guide for goal-setting in new construction or major renovation. This guide provides the following information: (1) A step-by-step outline of the benchmarking process. (2) A set of performance metrics for the whole building as well as individual systems. For each metric, the guide provides a definition, performance benchmarks, and potential actions that can be inferred from evaluating this metric. (3) A list and descriptions of the data required for computing the metrics. This guide is complemented by spreadsheet templates for data collection and for computing the benchmarking metrics. This guide builds on prior research supported by the national Laboratories for the 21st Century (Labs21) program, supported by the U.S. Department of Energy and the U.S. Environmental Protection Agency. Much of the benchmarking data are drawn from the Labs21 benchmarking database and technical guides. Additional benchmark data were obtained from engineering experts including laboratory designers and energy managers.

Toward a CFD-grade database addressing LWR containment phenomena

Energy Technology Data Exchange (ETDEWEB)

Paladino, Domenico, E-mail: domenico.paladino@psi.ch [Laboratory for Thermal-Hydraulics, Nuclear Energy and Safety Department, Paul Scherrer Institut, CH-5232 Villigen PSI (Switzerland); Andreani, Michele; Zboray, Robert; Dreier, Joerg [Laboratory for Thermal-Hydraulics, Nuclear Energy and Safety Department, Paul Scherrer Institut, CH-5232 Villigen PSI (Switzerland)

2012-12-15

Highlights: Black-Right-Pointing-Pointer The SETH-2 PANDA tests have supplied data with CFD-grade on plumes and jets at large-scale. Black-Right-Pointing-Pointer The PANDA tests have contributed to the understanding of phenomena with high safety relevance for LWRs. Black-Right-Pointing-Pointer The analytical activities related increased confidence in the use of various computational tools for safety analysis. - Abstract: The large-scale, multi-compartment PANDA facility (located at PSI in Switzerland) is one of the state-of-the-art facilities which is continuously upgraded to progressively match the requirements of CFD-grade experiments. Within the OECD/SETH projects, the PANDA facility has been used for the creation of an experimental database on basic containment phenomena e.g. gas mixing, transport, stratification, condensation. In the PANDA tests, these phenomena are driven by large scale plumes or jets. In the paper is presented a selection of the SETH PANDA experimental results. Examples of analytical activities performed at PSI using the GOTHIC, CFX-4 and CFX-5 codes will be used to illustrate how the spatial and temporal resolutions of the measurement grid in PANDA tests are adequate for CFD code (and advanced containment codes) assessment and validation purposes.

An analysis of the CSNI/GREST core concrete interaction chemical thermodynamic benchmark exercise using the MPEC2 computer code

International Nuclear Information System (INIS)

Muramatsu, Ken; Kondo, Yasuhiko; Uchida, Masaaki; Soda, Kunihisa

1989-01-01

Fission product (EP) release during a core concrete interaction (CCI) is an important factor of the uncertainty associated with a source term estimation for an LWR severe accident. An analysis was made on the CCI Chemical Thermodynamic Benchmark Exercise organized by OECD/NEA/CSNI Group of Experts on Source Terms (GREST) for investigating the uncertainty in thermodynamic modeling for CCI. The benchmark exercise was to calculate the equilibrium FP vapor pressure for given system of temperature, pressure, and debris composition. The benchmark consisted of two parts, A and B. Part A was a simplified problem intended to test the numerical techniques. In part B, the participants were requested to use their own best estimate thermodynamic data base to examine the variability of the results due to the difference in thermodynamic data base. JAERI participated in this benchmark exercise with use of the MPEC2 code. Chemical thermodynamic data base needed for analysis of Part B was taken from the VENESA code. This report describes the computer code used, inputs to the code, and results from the calculation by JAERI. The present calculation indicates that the FP vapor pressure depends strongly on temperature and Oxygen potential in core debris and the pattern of dependency may be different for different FP elements. (author)

BWR stability analysis: methodology of the stability analysis and results of PSI for the NEA/NCR benchmark task; SWR Stabilitaetsanalyse: Methodik der Stabilitaetsanalyse und PSI-Ergebnisse zur NEA/NCR Benchmarkaufgabe

Energy Technology Data Exchange (ETDEWEB)

Hennig, D.; Nechvatal, L. [Paul Scherrer Inst. (PSI), Villigen (Switzerland)

1996-09-01

The report describes the PSI stability analysis methodology and the validation of this methodology based on the international OECD/NEA BWR stability benchmark task. In the frame of this work, the stability properties of some operation points of the NPP Ringhals 1 have been analysed and compared with the experimental results. (author) figs., tabs., 45 refs.

Eesti allkirjastas liitumislepingu OECD-ga

Index Scriptorium Estoniae

2010-01-01

Peaminister Andrus Ansip ja OECD peasekretär Angel Gurria allkirjastasid 3. juunil 2010. a. Stenbocki majas Eesti liitumislepingu. Samal päeval kohtus president Toomas Hendrik Ilves Angel Gurriaga Kadriorus

Seth Nicholson's First Satellite Discovery: Jupiter IX and His Orbit for It

Science.gov (United States)

Osterbrock, Donald E.

2006-12-01

Seth B. Nicholson was a graduate astronomy student at the University of California in Berkeley when he discovered his first satellite in 1914. He was later to discover three more, after he had joined the Mount Wilson Observatory staff following his PhD in 1915. Nicholson had begun his thesis on the problem of computing an improved orbit for J VIII, which had been discovered by Melotte in England in 1908, a distant irregular satellite like J VI and J VII. Nicholson was taking photographic plates to measure the position of J VIII in the summer of 1914 with the Crossley 36-inch reflector of Lick Observatory. He was a teaching assistant at Berkeley that summer, but would go up to Mount Hamilton to observe on weekends in the dark of the moon, traveling by rail, stage (an automobile on a regular schedule between San Jose and the observatory) and interurban trolley car, and sleeping in a shed near the Crossley dome. He first saw J IX as a much fainter object with the same motion as J VIII on a plate he took in late July 1914, and realized it must be another satellite of the giant planet. Nicholson obtained his first orbit of J IX, which had by then become his new thesis topic, in September, and published a paper on it in early 1915. Its orbit, like that of J VIII, was retrograde and irregular, but it was considerably fainter. Nicholson, a loyal student of Armin O. Leuschner, the head of the Berkeley Astronomy Division, used his teacher's "short method" (or analytic method) to calculate the orbit.

Benchmarking local healthcare-associated infections: Available benchmarks and interpretation challenges

Directory of Open Access Journals (Sweden)

Aiman El-Saed

2013-10-01

Full Text Available Summary: Growing numbers of healthcare facilities are routinely collecting standardized data on healthcare-associated infection (HAI, which can be used not only to track internal performance but also to compare local data to national and international benchmarks. Benchmarking overall (crude HAI surveillance metrics without accounting or adjusting for potential confounders can result in misleading conclusions. Methods commonly used to provide risk-adjusted metrics include multivariate logistic regression analysis, stratification, indirect standardization, and restrictions. The characteristics of recognized benchmarks worldwide, including the advantages and limitations are described. The choice of the right benchmark for the data from the Gulf Cooperation Council (GCC states is challenging. The chosen benchmark should have similar data collection and presentation methods. Additionally, differences in surveillance environments including regulations should be taken into consideration when considering such a benchmark. The GCC center for infection control took some steps to unify HAI surveillance systems in the region. GCC hospitals still need to overcome legislative and logistic difficulties in sharing data to create their own benchmark. The availability of a regional GCC benchmark may better enable health care workers and researchers to obtain more accurate and realistic comparisons. Keywords: Benchmarking, Comparison, Surveillance, Healthcare-associated infections

Participation in benchmark MATIS-H of NEA/OCDE: uses CFD codes applied to nuclear safety. Study of the spacer grids in the fuel elements

International Nuclear Information System (INIS)

Pena-Monferrer, C.; Chiva, S.; Munoz-cobo, J. L.; Vela, E.

2012-01-01

This paper develops participation in benchmark MATIS-H, promoted by the NEA / OECD-KAERI, involving the study of turbulent flow in a rod beam with spacers in an experimental installation. Its aim is the analysis of hydraulic behavior of turbulent flow in the subchannels of the fuel elements, essential for the improvement of safety margins in normal and transient operations and to maximize the use of nuclear energy through an optimal design of grids.

The activities of the OECD/NEA in the field of earthquake engineering

International Nuclear Information System (INIS)

Sollogoub, P.; Kitada, Y.; Mathet, E.

2005-01-01

The Working Group on the Integrity and Aging of Components and Structures (IAGE) is established under the senior committee on the Safety of Nuclear Installations (CSNI) of the OECD/NEA (Organization of Economic Cooperation and Development/Nuclear Energy Agency). This Committee deals with safety-related R and D aspects. The mandate of this Working Group is to advise the CSNI on the topical basis for management of plant ageing and to propose general principles to maintain the integrity of systems and components. The Working Group is composed of three sub-groups addressing metallic components, concrete structures and the seismic behavior of structures and components. The groups operate through annual plenary meetings, workshops, state-of-the-art reports, topical opinion papers and benchmarks to produce advises to the CSNI. Twenty five high level experts from fifteen countries attend the Seismic Group (safety authorities, researchers, utilities, and representatives from other international organizations (IAEA, EC)). In this paper the scope of activities and recent tasks of the Seismic Group are presented. (authors)

Growth and Expansion of the International Criticality Safety Benchmark Evaluation Project and the Newly Organized International Reactor Physics Experiment Evaluation Project

International Nuclear Information System (INIS)

J. Blair Briggs; Lori Scott; Yolanda Rugama; Enrico Satori

2007-01-01

Since ICNC 2003, the International Criticality Safety Benchmark Evaluation Project (ICSBEP) has continued to expand its efforts and broaden its scope. Criticality-alarm/shielding type benchmarks and fundamental physics measurements that are relevant to criticality safety applications are not only included in the scope of the project, but benchmark data are also included in the latest version of the handbook. A considerable number of improvements have been made to the searchable database, DICE and the criticality-alarm/shielding benchmarks and fundamental physics measurements have been included in the database. There were 12 countries participating on the ICSBEP in 2003. That number has increased to 18 with recent contributions of data and/or resources from Brazil, Czech Republic, Poland, India, Canada, and China. South Africa, Germany, Argentina, and Australia have been invited to participate. Since ICNC 2003, the contents of the ''International Handbook of Evaluated Criticality Safety Benchmark Experiments'' have increased from 350 evaluations (28,000 pages) containing benchmark specifications for 3070 critical or subcritical configurations to 442 evaluations (over 38,000 pages) containing benchmark specifications for 3957 critical or subcritical configurations, 23 criticality-alarm-placement/shielding configurations with multiple dose points for each, and 20 configurations that have been categorized as fundamental physics measurements that are relevant to criticality safety applications in the 2006 Edition of the ICSBEP Handbook. Approximately 30 new evaluations and 250 additional configurations are expected to be added to the 2007 Edition of the Handbook. Since ICNC 2003, a reactor physics counterpart to the ICSBEP, The International Reactor Physics Experiment Evaluation Project (IRPhEP) was initiated. Beginning in 1999, the IRPhEP was conducted as a pilot activity by the by the Organization of Economic Cooperation and Development (OECD) Nuclear Energy Agency

Energy demand in seven OECD countries

International Nuclear Information System (INIS)

Patry, M.

1990-01-01

The intensity of utilization of energy has been declining in all OECD countries since the first oil price shock of 1973. In 1988, the OECD countries were consuming 1.7 billion tonnes of crude oil, that is two hundred million tonnes less than fifteen years ago. From 1974 to 1988, OECD oil consumption decreased at an average annual rate of 1.3% while the GDP of these countries rose by an average of 2.6% per annum. The authors present here a model of sectoral energy demand and interfuel substitution for the G-7 countries: Canada, France, Germany, Italy, Japan, the United Kingdom and the United States. The ultimate goal is to determine the relative importance of the contributing factors to the observed reversal in energy consumption per unit of production in these countries. The results they present should be viewed as preliminary. They point in the paper to a number of extensions that should improve the theoretical quality of the modeling effort and the statistical robustness of the results. They are presently expanding the data set to pinpoint more adequately the effects of structural change and conservation

Self-benchmarking Guide for Laboratory Buildings: Metrics, Benchmarks, Actions

Energy Technology Data Exchange (ETDEWEB)

Mathew, Paul; Greenberg, Steve; Sartor, Dale

2009-07-13

This guide describes energy efficiency metrics and benchmarks that can be used to track the performance of and identify potential opportunities to reduce energy use in laboratory buildings. This guide is primarily intended for personnel who have responsibility for managing energy use in existing laboratory facilities - including facilities managers, energy managers, and their engineering consultants. Additionally, laboratory planners and designers may also use the metrics and benchmarks described in this guide for goal-setting in new construction or major renovation. This guide provides the following information: (1) A step-by-step outline of the benchmarking process. (2) A set of performance metrics for the whole building as well as individual systems. For each metric, the guide provides a definition, performance benchmarks, and potential actions that can be inferred from evaluating this metric. (3) A list and descriptions of the data required for computing the metrics. This guide is complemented by spreadsheet templates for data collection and for computing the benchmarking metrics. This guide builds on prior research supported by the national Laboratories for the 21st Century (Labs21) program, supported by the U.S. Department of Energy and the U.S. Environmental Protection Agency. Much of the benchmarking data are drawn from the Labs21 benchmarking database and technical guides. Additional benchmark data were obtained from engineering experts including laboratory designers and energy managers.

Practical Application of Art. 9 OECD Model Convention: the Czech Republic

Directory of Open Access Journals (Sweden)

Veronika Solilová

2014-01-01

Full Text Available All transfer prices determined between the associated enterprises must comply with the arm’s length principle. The arm’s length principle for associated enterprises is mentioned in Art. 9(1 of the OECD Model Convention, which was also adopted by the OECD Member states into their national law. However, not all OECD Member states adopted the next part of Art. 9, namely Art. 9(2, with the same way, some of them, like the Czech Republic, entered a reservation on Art. 9 (2 OECD Model Convention. In this paper the practical application of Art. 9 is analyzed from the point of view of the Czech Ministry of Finance, where the corresponding adjustment and time-limit issue are highlighted. On the basis of the results of analysis, where the history, context and purpose of Art. 9 OECD Model Convention have to be taken into account, are made some recommendations.

Energy statistics and balances of non-OECD countries 1991-1992

International Nuclear Information System (INIS)

1994-01-01

Contains a compilation of energy production and consumption statistics for 85 non-OECD countries and regions, including developing countries, Central and Eastern European countries and the former Soviet Union. Data are expressed in original units and in common units for coal, oil, gas, electricity and heat. Historical tables for both individual countries and regions summarize data on coal, gas and electricity production and consumption since 1971. Similar data for OECD are available in the IEA publications Energy Statistics and Energy Balances of OECD Countries

Availability of Neutronics Benchmarks in the ICSBEP and IRPhEP Handbooks for Computational Tools Testing

Energy Technology Data Exchange (ETDEWEB)

Bess, John D.; Briggs, J. Blair; Ivanova, Tatiana; Hill, Ian; Gulliford, Jim

2017-02-01

In the past several decades, numerous experiments have been performed worldwide to support reactor operations, measurements, design, and nuclear safety. Those experiments represent an extensive international investment in infrastructure, expertise, and cost, representing significantly valuable resources of data supporting past, current, and future research activities. Those valuable assets represent the basis for recording, development, and validation of our nuclear methods and integral nuclear data [1]. The loss of these experimental data, which has occurred all too much in the recent years, is tragic. The high cost to repeat many of these measurements can be prohibitive, if not impossible, to surmount. Two international projects were developed, and are under the direction of the Organisation for Co-operation and Development Nuclear Energy Agency (OECD NEA) to address the challenges of not just data preservation, but evaluation of the data to determine its merit for modern and future use. The International Criticality Safety Benchmark Evaluation Project (ICSBEP) was established to identify and verify comprehensive critical benchmark data sets; evaluate the data, including quantification of biases and uncertainties; compile the data and calculations in a standardized format; and formally document the effort into a single source of verified benchmark data [2]. Similarly, the International Reactor Physics Experiment Evaluation Project (IRPhEP) was established to preserve integral reactor physics experimental data, including separate or special effects data for nuclear energy and technology applications [3]. Annually, contributors from around the world continue to collaborate in the evaluation and review of select benchmark experiments for preservation and dissemination. The extensively peer-reviewed integral benchmark data can then be utilized to support nuclear design and safety analysts to validate the analytical tools, methods, and data needed for next

Overview of the OECD Halden reactor project

International Nuclear Information System (INIS)

Vitanza, C.

2000-01-01

The OECD Halden Reactor Project is an international network dedicated to enhancing the safety and reliability of nuclear power plants. The project operates under the auspices of the OECD Nuclear Energy Agency and aims at addressing and resolving issues relevant to safety as they emerge in the nuclear community. This paper gives a concise presentation of the project's goals and of its technical infrastructure. The paper also contains a brief overview of results from the ongoing programme and of the main issues contemplated for the next three-year programme period (2000-2002). (author)

Using Satellite Altimetry to Calibrate the Simulation of Typhoon Seth Storm Surge off Southeast China

Directory of Open Access Journals (Sweden)

Xiaohui Li

2018-04-01

Full Text Available Satellite altimeters can capture storm surges generated by typhoons and tropical storms, if the satellite flies over at the right time. In this study, we show TOPEX/Poseidon altimeter-observed storm surge features off Southeast China on 10 October 1994 during Typhoon Seth. We then use a three-dimensional, barotropic, finite-volume community ocean model (FVCOM to simulate storm surges. An innovative aspect is that satellite data are used to calibrate the storm surge model to improve model performance, by adjusting model wind forcing fields (the National Center for Environment Prediction (NCEP reanalysis product in reference to the typhoon best-track data. The calibration reduces the along-track root-mean-square (RMS difference between model and altimetric data from 0.15 to 0.10 m. It also reduces the RMS temporal difference from 0.21 to 0.18 m between the model results and independent tide-gauge data at Xiamen. In particular, the calibrated model produces a peak storm surge of 1.01 m at 6:00 10 October 1994 at Xiamen, agreeing with tide-gauge data; while the peak storm surge with the NCEP forcing is 0.71 m only. We further show that the interaction between storm surges and astronomical tides contributes to the peak storm surge by 34% and that the storm surge propagates southwestward as a coastally-trapped Kelvin wave.

OECD Halden Reactor Project

International Nuclear Information System (INIS)

1988-01-01

The OECD Halden Reactor project is an agreement between OECD member countries. It was first signed in 1958 and since then regularly renewed every third year. The activities at the Project is centred around the Halden heavy water rector, the HBWR. The reseach programme comprizes studies of fuel performance under various operating conditions, and the application of computers for process control. The HBWR is equipped for exposing fuel rods to temperatures and pressures, and at heat ratings met in modern BWR's and PWR's. A range of in-core instruments are available, permitting detailed measurements of the reactions of the fuel, including mechanical deformations, thermal behaviour, fission gas release, and corrosion. In the area of computer application, the studies of the communication between operator and process, and the surveillance and control of the reactor core, are of particular interst for reactor operation. 1988 represents the 30th year since the Project was started, and this publication is produced to mark this event. It gives and account of the activities and achievements of the Project through the years 1958-1988

The calculational VVER burnup Credit Benchmark No.3 results with the ENDF/B-VI rev.5 (1999)

Energy Technology Data Exchange (ETDEWEB)

Rodriguez Gual, Maritza [Centro de Tecnologia Nuclear, La Habana (Cuba). E-mail: mrgual@ctn.isctn.edu.cu

2000-07-01

The purpose of this papers to present the results of CB3 phase of the VVER calculational benchmark with the recent evaluated nuclear data library ENDF/B-VI Rev.5 (1999). This results are compared with the obtained from the other participants in the calculations (Czech Republic, Finland, Hungary, Slovaquia, Spain and the United Kingdom). The phase (CB3) of the VVER calculation benchmark is similar to the Phase II-A of the OECD/NEA/INSC BUC Working Group benchmark for PWR. The cases without burnup profile (BP) were performed with the WIMS/D-4 code. The rest of the cases have been carried with DOTIII discrete ordinates code. The neutron library used was the ENDF/B-VI rev. 5 (1999). The WIMS/D-4 (69 groups) is used to collapse cross sections from the ENDF/B-VI Rev. 5 (1999) to 36 groups working library for 2-D calculations. This work also comprises the results of CB1 (obtained with ENDF/B-VI rev. 5 (1999), too) and CB3 for cases with Burnup of 30 MWd/TU and cooling time of 1 and 5 years and for case with Burnup of 40 MWd/TU and cooling time of 1 year. (author)

Education and Obesity in Four OECD Countries. OECD Education Working Papers, No. 39

Science.gov (United States)

Sassi, Franco; Devaux, Marion; Church, Jody; Cecchini, Michele; Borgonovi, Francesca

2009-01-01

An epidemic of obesity has been developing in virtually all OECD countries over the last 30 years. Existing evidence provides strong suggestions that such epidemic has affected certain social groups more than others. In particular, education appears to be associated with a lower likelihood of obesity, especially among women. A range of analyses of…

The (New) OECD Jobs Study: Introduction and Assessment

OpenAIRE

Alfred Stiglbauer

2006-01-01

In 1994, the OECD presented the Jobs Study analyzing the causes of high unemployment in Europe. The study identified inappropriate labor market regulations and legislation as a key determinant of high unemployment. The OECD recommended deregulation and liberalization of labor market institutions as a remedy. Meanwhile, new empirical research has explored the influence of labor market institutions on unemployment and has only partly confirmed the recommendations of the Jobs Study. In a reevalu...

Analysis of CSNI benchmark test on containment using the code CONTRAN

International Nuclear Information System (INIS)

Haware, S.K.; Ghosh, A.K.; Raj, V.V.; Kakodkar, A.

1994-01-01

A programme of experimental as well as analytical studies on the behaviour of nuclear reactor containment is being actively pursued. A large number ol' experiments on pressure and temperature transients have been carried out on a one-tenth scale model vapour suppression pool containment experimental facility, simulating the 220 MWe Indian Pressurised Heavy Water Reactors. A programme of development of computer codes is underway to enable prediction of containment behaviour under accident conditions. This includes codes for pressure and temperature transients, hydrogen behaviour, aerosol behaviour etc. As a part of this ongoing work, the code CONTRAN (CONtainment TRansient ANalysis) has been developed for predicting the thermal hydraulic transients in a multicompartment containment. For the assessment of the hydrogen behaviour, the models for hydrogen transportation in a multicompartment configuration and hydrogen combustion have been incorporated in the code CONTRAN. The code also has models for the heat and mass transfer due to condensation and convection heat transfer. The structural heat transfer is modeled using the one-dimensional transient heat conduction equation. Extensive validation exercises have been carried out with the code CONTRAN. The code CONTRAN has been successfully used for the analysis of the benchmark test devised by Committee on the Safety of Nuclear Installations (CSNI) of the Organisation for Economic Cooperation and Development (OECD), to test the numerical accuracy and convergence errors in the computation of mass and energy conservation for the fluid and in the computation of heat conduction in structural walls. The salient features of the code CONTRAN, description of the CSNI benchmark test and a comparison of the CONTRAN predictions with the benchmark test results are presented and discussed in the paper. (author)

Benchmarks for Uncertainty Analysis in Modelling (UAM) for the Design, Operation and Safety Analysis of LWRs - Volume I: Specification and Support Data for Neutronics Cases (Phase I)

International Nuclear Information System (INIS)

Ivanov, K.; Avramova, M.; Kamerow, S.; Kodeli, I.; Sartori, E.; Ivanov, E.; Cabellos, O.

2013-01-01

The objective of the OECD LWR UAM activity is to establish an internationally accepted benchmark framework to compare, assess and further develop different uncertainty analysis methods associated with the design, operation and safety of LWRs. As a result, the LWR UAM benchmark will help to address current nuclear power generation industry and regulation needs and issues related to practical implementation of risk-informed regulation. The realistic evaluation of consequences must be made with best-estimate coupled codes, but to be meaningful, such results should be supplemented by an uncertainty analysis. The use of coupled codes allows us to avoid unnecessary penalties due to incoherent approximations in the traditional decoupled calculations, and to obtain more accurate evaluation of margins regarding licensing limit. This becomes important for licensing power upgrades, improved fuel assembly and control rod designs, higher burn-up and others issues related to operating LWRs as well as to the new Generation 3+ designs being licensed now (ESBWR, AP-1 000, EPR-1 600, etc.). Establishing an internationally accepted LWR UAM benchmark framework offers the possibility to accelerate the licensing process when using best estimate methods. The proposed technical approach is to establish a benchmark for uncertainty analysis in best-estimate modelling and coupled multi-physics and multi-scale LWR analysis, using as bases a series of well-defined problems with complete sets of input specifications and reference experimental data. The objective is to determine the uncertainty in LWR system calculations at all stages of coupled reactor physics/thermal hydraulics calculations. The full chain of uncertainty propagation from basic data, engineering uncertainties, across different scales (multi-scale), and physics phenomena (multi-physics) will be tested on a number of benchmark exercises for which experimental data are available and for which the power plant details have been

Japan and the OECD - a lesson for Romania

OpenAIRE

Iustina Luţan

2007-01-01

The Organisation for Economic Co-operation and Development (OECD) is a unique forum where the governments of 30 market democracies work together to address the economic, social and governance challenges of globalisation as well as to exploit its opportunities. One of the most important advantages of the OECD over other intergovernmental organizations or academia is the fact that the work, expertise, and know-how is transferred from a wide range of participants, like member countries, senior o...

Summary of nuclear power and fuel cycle data in OECD Member countries

International Nuclear Information System (INIS)

1983-03-01

A questionnaire on Electricity Generation, Nuclear Power and Fuel Cycle Data is distributed annually to OECD Member countries. Member countries were asked to provide, where available, various statistics for the previous calendar year (1982) and modified projections up to the year 2000. Tables 1 to 8 are based on the responses received and update the March 1982 issue. Tables 3 to 8 show the revised electricity, nuclear power and fuel cycle supply and demand projections in OECD Member countries to the year 2000. Figure 1 illustrates the contribution of the different fuel sources to the OECD's electricity generation from 1974 to 1982. Figure 2 shows the nuclear share of electricity generation in the OECD countries for 1982 and 1985. Figure 3 gives the fuel cycle supply and demand from the Tables 5, 6 and 8 in the OECD area

Overview of the OECD-Halden reactor project

International Nuclear Information System (INIS)

Vitanza, Carlo

2001-01-01

The OECD Halden Reactor Project is an international network dedicated to enhanced safety and reliability of nuclear power plants. The Project operates under the auspices of the OECD Nuclear Energy Agency and aims at addressing and resolving issues relevant to safety as they emerge in the nuclear community. This paper gives a concise presentation of the Project goals and of its technical infrastructure. The paper contains also a brief overview of results from the programme carried out in the time period 1997-1999 and of the main issues contemplated for the 3-year programme period 2000-2002

Growth and Expansion of the International Criticality Safety Benchmark Evaluation Project and the Newly Organized International Reactor Physics Experiment Evaluation Project

Energy Technology Data Exchange (ETDEWEB)

J. Blair Briggs; Lori Scott; Yolanda Rugama; Enrico Satori

2007-05-01

Since ICNC 2003, the International Criticality Safety Benchmark Evaluation Project (ICSBEP) has continued to expand its efforts and broaden its scope. Criticality-alarm / shielding type benchmarks and fundamental physics measurements that are relevant to criticality safety applications are not only included in the scope of the project, but benchmark data are also included in the latest version of the handbook. A considerable number of improvements have been made to the searchable database, DICE and the criticality-alarm / shielding benchmarks and fundamental physics measurements have been included in the database. There were 12 countries participating on the ICSBEP in 2003. That number has increased to 18 with recent contributions of data and/or resources from Brazil, Czech Republic, Poland, India, Canada, and China. South Africa, Germany, Argentina, and Australia have been invited to participate. Since ICNC 2003, the contents of the “International Handbook of Evaluated Criticality Safety Benchmark Experiments” have increased from 350 evaluations (28,000 pages) containing benchmark specifications for 3070 critical or subcritical configurations to 442 evaluations (over 38,000 pages) containing benchmark specifications for 3957 critical or subcritical configurations, 23 criticality-alarm-placement / shielding configurations with multiple dose points for each, and 20 configurations that have been categorized as fundamental physics measurements that are relevant to criticality safety applications in the 2006 Edition of the ICSBEP Handbook. Approximately 30 new evaluations and 250 additional configurations are expected to be added to the 2007 Edition of the Handbook. Since ICNC 2003, a reactor physics counterpart to the ICSBEP, The International Reactor Physics Experiment Evaluation Project (IRPhEP) was initiated. Beginning in 1999, the IRPhEP was conducted as a pilot activity by the by the Organization of Economic Cooperation and Development (OECD) Nuclear Energy

Benchmarking in University Toolbox

Directory of Open Access Journals (Sweden)

Katarzyna Kuźmicz

2015-06-01

Full Text Available In the face of global competition and rising challenges that higher education institutions (HEIs meet, it is imperative to increase innovativeness and efficiency of their management. Benchmarking can be the appropriate tool to search for a point of reference necessary to assess institution’s competitive position and learn from the best in order to improve. The primary purpose of the paper is to present in-depth analysis of benchmarking application in HEIs worldwide. The study involves indicating premises of using benchmarking in HEIs. It also contains detailed examination of types, approaches and scope of benchmarking initiatives. The thorough insight of benchmarking applications enabled developing classification of benchmarking undertakings in HEIs. The paper includes review of the most recent benchmarking projects and relating them to the classification according to the elaborated criteria (geographical range, scope, type of data, subject, support and continuity. The presented examples were chosen in order to exemplify different approaches to benchmarking in higher education setting. The study was performed on the basis of the published reports from benchmarking projects, scientific literature and the experience of the author from the active participation in benchmarking projects. The paper concludes with recommendations for university managers undertaking benchmarking, derived on the basis of the conducted analysis.

Sensitivity Study of Regional TDC in MATRA-S code Using PSBT Benchmark Exercise

International Nuclear Information System (INIS)

Kim, Seong Jin; Cha, Jeong Hun; Seo, Kyong Won; Kwon, Hyuk; Hwang, Dae Hyun

2012-01-01

In the sub-channel analysis code, the modeling of interchannel exchanges between adjacent sub-channels expressed as diversion cross flow, turbulent mixing and so on. The turbulent mixing in MATRA-S code is considered as TDC( β : thermal diffusion coefficient). The TDC becomes different according to the bundle, grid type, mixing vane, and so on. Generally, the thermal mixing test is conducted to optimize the TDC. In the OECD/NRC PSBT benchmark, the thermal mixing test was conducted and the optimized TDC was analyzed using MATRA-S code. It was shown that the exit temperature distribution of MATRA-S code was different from an experimental result even though the optimized TDC was applied to the code. In this study, concept of the regional TDC was introduced and sensitivity analysis of the regional TDC was presented

Library Benchmarking

Directory of Open Access Journals (Sweden)

Wiji Suwarno

2017-02-01

Full Text Available The term benchmarking has been encountered in the implementation of total quality (TQM or in Indonesian termed holistic quality management because benchmarking is a tool to look for ideas or learn from the library. Benchmarking is a processof measuring and comparing for continuous business process of systematic and continuous measurement, the process of measuring and comparing for continuous business process of an organization to get information that can help these organization improve their performance efforts.

OECD Trilog Plenary Symposium : public policy issues in global freight logistics

Science.gov (United States)

1998-01-01

This is the fifth plenary symposium on public policy issues in global freight logistics conducted by the Organization for Economic Cooperation and Development (OECD). OECD's Trilateral Logistics Project, Trilog Project, is aimed at clarifying the pub...

OECD BEPS: Reconciling global trade, taxation principles and the digital economy

OpenAIRE

Lee-Makiyama, Hosuk; Verschelde, Bert

2014-01-01

Following media reports on the low tax rates paid by some of the world's largest multinationals, international tax reform has moved to the top of policy-makers' agendas across the world. At the request of the G20, the OECD has designed an action plan to address what it calls base erosion and profit shifting (BEPS) - namely that the corporate tax base is eroding due to the internet. However OECD itself admits there is no evidence of base erosion in reality. Nonetheless, some OECD and EU Member...

OECD, "Key Competencies" and the New Challenges of Educational Inequality

Science.gov (United States)

Takayama, Keita

2013-01-01

In this paper, I develop a critique of the Organization for Economic Cooperation and Development (OECD)-based lifelong learning policy discourse with a particular focus on "key competencies" (KCs) and its equity implications for school curricular policies. First, I review the discussion of KCs in the writings by the OECD-affiliated…

Analysis of a computational benchmark for a high-temperature reactor using SCALE

International Nuclear Information System (INIS)

Goluoglu, S.

2006-01-01

Several proposed advanced reactor concepts require methods to address effects of double heterogeneity. In doubly heterogeneous systems, heterogeneous fuel particles in a moderator matrix form the fuel region of the fuel element and thus constitute the first level of heterogeneity. Fuel elements themselves are also heterogeneous with fuel and moderator or reflector regions, forming the second level of heterogeneity. The fuel elements may also form regular or irregular lattices. A five-phase computational benchmark for a high-temperature reactor (HTR) fuelled with uranium or reactor-grade plutonium has been defined by the Organization for Economic Cooperation and Development, Nuclear Energy Agency (OECD NEA), Nuclear Science Committee, Working Party on the Physics of Plutonium Fuels and Innovative Fuel Cycles. This paper summarizes the analysis results using the latest SCALE code system (to be released in CY 2006 as SCALE 5.1). (authors)

FENDL neutronics benchmark: Specifications for the calculational neutronics and shielding benchmark

International Nuclear Information System (INIS)

Sawan, M.E.

1994-12-01

During the IAEA Advisory Group Meeting on ''Improved Evaluations and Integral Data Testing for FENDL'' held in Garching near Munich, Germany in the period 12-16 September 1994, the Working Group II on ''Experimental and Calculational Benchmarks on Fusion Neutronics for ITER'' recommended that a calculational benchmark representative of the ITER design should be developed. This report describes the neutronics and shielding calculational benchmark available for scientists interested in performing analysis for this benchmark. (author)

New prompt fission gamma-ray spectral data from 239Pu(nth, f in response to a high priority request from OECD Nuclear Energy Agency

Directory of Open Access Journals (Sweden)

Gatera Angélique

2017-01-01

Full Text Available Benchmark reactor calculations have revealed an underestimation of γ-heat following fission of up to 28%. To improve the modelling of new nuclear reactors, the OECD/NEA initiated a nuclear data High Priority Request List (HPRL entry for the major isotopes (235U, 239Pu. In response to that HPRL entry, we executed a dedicated measurement program on prompt fission γ-rays employing state-of-the-art lanthanum bromide (LaBr3 detectors with superior timing and good energy resolution. Our new results from 252Cf(sf, 235U(nth,f and 241Pu(nth,f provide prompt fission γ-ray spectra characteristics : average number of photons per fission, average total energy per fission and mean photon energy; all within 2% of uncertainty. We present preliminary results on 239Pu(nth,f, recently measured at the Budapest Neutron Centre and supported by the CHANDA Trans-national Access Activity, as well as discussing our different published results in comparison to the historical data and what it says about the discrepancy observed in the benchmark calculations.

Quarterly coal statistics of OECD countries

Energy Technology Data Exchange (ETDEWEB)

1992-04-27

These quarterly statistics contain data from the fourth quarter 1990 to the fourth quarter 1991. The first set of tables (A1 to A30) show trends in production, trade, stock change and apparent consumption data for OECD countries. Tables B1 to B12 show detailed statistics for some major coal trade flows to and from OECD countries and average value in US dollars. A third set of tables, C1 to C12, show average import values and indices. The trade data have been extracted or derived from national and EEC customs statistics. An introductory section summarizes trends in coal supply and consumption, deliveries to thermal power stations; electricity production and final consumption of coal and tabulates EEC and Japanese steam coal and coking coal imports to major countries.

Analysis and sensitivity studies with CORETRAN and RETRAN-3D of the NEACRP PWR rod ejection benchmark

Energy Technology Data Exchange (ETDEWEB)

Ferroukhi, H.; Coddington, P. [Paul Scherrer Inst. (PSI), Villigen (Switzerland)

2001-07-01

The OECD/NEA PWR rod ejection benchmark has been analysed using the 3-D nodal spatial-kinetic codes CORETRAN and RETRAN-3D. The following results were obtained. A) The agreement in 3-D solution between CORETRAN and RETRAN-3D was found to be very good both during steady-state and transient conditions. In particular at HZP (hot zero power), an excellent agreement in the initial steady-state 3-D power distribution and with regard to the core power excursion during the super-prompt critical phase of the transient (i.e. when the negative reactivity feedback is still very weak) was found. This illustrates the consistency in the neutronic solution between both codes. B) At both HZP and FP (full power) conditions, the CORETRAN and RETRAN-3D results lie well within the range of the previous benchmark solutions. In particular at HZP, both codes predict a power excursion and an increase in maximum pellet temperature that are among the closest results to those obtained with the benchmark reference solution. It must here be emphasised that these analyses are by no means a validation of the codes. However, the good agreement of both CORETRAN and RETRAN-3D with other 3-D solutions provides confidence in the ability of these codes to analyse LWR (light water reactor) core transients. In addition, it was found appropriate to perform, for this well-defined international benchmark problem, some sensitivity studies in order to assess the impact of modelling options on the CORETRAN and RETRAN-3D results. (authors)

Analysis and sensitivity studies with CORETRAN and RETRAN-3D of the NEACRP PWR rod ejection benchmark

International Nuclear Information System (INIS)

Ferroukhi, H.; Coddington, P.

2001-01-01

The OECD/NEA PWR rod ejection benchmark has been analysed using the 3-D nodal spatial-kinetic codes CORETRAN and RETRAN-3D. The following results were obtained. A) The agreement in 3-D solution between CORETRAN and RETRAN-3D was found to be very good both during steady-state and transient conditions. In particular at HZP (hot zero power), an excellent agreement in the initial steady-state 3-D power distribution and with regard to the core power excursion during the super-prompt critical phase of the transient (i.e. when the negative reactivity feedback is still very weak) was found. This illustrates the consistency in the neutronic solution between both codes. B) At both HZP and FP (full power) conditions, the CORETRAN and RETRAN-3D results lie well within the range of the previous benchmark solutions. In particular at HZP, both codes predict a power excursion and an increase in maximum pellet temperature that are among the closest results to those obtained with the benchmark reference solution. It must here be emphasised that these analyses are by no means a validation of the codes. However, the good agreement of both CORETRAN and RETRAN-3D with other 3-D solutions provides confidence in the ability of these codes to analyse LWR (light water reactor) core transients. In addition, it was found appropriate to perform, for this well-defined international benchmark problem, some sensitivity studies in order to assess the impact of modelling options on the CORETRAN and RETRAN-3D results. (authors)

Benchmarking and Performance Measurement.

Science.gov (United States)

Town, J. Stephen

This paper defines benchmarking and its relationship to quality management, describes a project which applied the technique in a library context, and explores the relationship between performance measurement and benchmarking. Numerous benchmarking methods contain similar elements: deciding what to benchmark; identifying partners; gathering…

Computational benchmark on the void reactivity effect in MOX lattices. Contribution to a NEA-NSC benchmark study organized by the Working Party on Plutonium Recycling

International Nuclear Information System (INIS)

Freudenreich, W.E.; Aaldijk, J.K.

1994-08-01

The Working Party on Plutonium Recycling of the Nuclear Science Committee of the OECD Nuclear Energy Agency has initiated a benchmark study on the calculation of the void reactivity effect in MOX lattices. The results presented here were obtained with the continuous energy, generalized geometry Monte Carlo transport code MCNP. The cross-section libraries used were processed from the JEF-2.2 evaluation taking into account selfshielding in the unresolved resonance ranges (selfshielding in the resolved resonance ranges is treated by MCNP). For an infinite lattice of unit cells a positive void reactivity effect was found only for the MOX fuel with the largest Pu content. For an infinite lattice of macro cells (voidable inner zone with different fuel mixtures surrounded by an outer zone of UO 2 fuel with moderator) a positive void reactivity effect was obtained for the three MOX fuel types considered. The results are not representative for MOX-loaded power reactor lattices, but serve only to intercompare reactor physics codes and libraries. (orig.)

Benchmarking in the Netherlands

International Nuclear Information System (INIS)

1999-01-01

In two articles an overview is given of the activities in the Dutch industry and energy sector with respect to benchmarking. In benchmarking operational processes of different competitive businesses are compared to improve your own performance. Benchmark covenants for energy efficiency between the Dutch government and industrial sectors contribute to a growth of the number of benchmark surveys in the energy intensive industry in the Netherlands. However, some doubt the effectiveness of the benchmark studies

Budget reform in Ukraine and the OECD countries

Directory of Open Access Journals (Sweden)

Puchko Anna

2016-09-01

Full Text Available The article analyzes the fiscal reforms in Ukraine and the OECD countries. It has been proved that the main areas which should undergo changes are the tax reform, regulatory reform and restructuring policies to encourage entrepreneurship, reform of social protection and social security, reform of social sphere constituents, administrative reform, reform of the army and law enforcement, administrative and territorial reform. According to the analysis results, there has been drawn the conclusion about the need to introduce in Ukraine the successful experience of the OECD countries in implementing budget reforms.

Inequality in OECD countries.

Science.gov (United States)

Thévenot, Celine

2017-08-01

This article recalls the state of play of inequality levels and trends in OECD countries, with a special focus on Nordic countries. It sheds light on explaining the drivers of the rise in inequality and its economic consequences. It addresses in particular the issue of redistribution through taxes and transfers. It concludes with an overview of policy packages that should be considered to address the issue of rising inequalities.

WLUP benchmarks

International Nuclear Information System (INIS)

Leszczynski, Francisco

2002-01-01

The IAEA-WIMS Library Update Project (WLUP) is on the end stage. The final library will be released on 2002. It is a result of research and development made by more than ten investigators during 10 years. The organization of benchmarks for testing and choosing the best set of data has been coordinated by the author of this paper. It is presented the organization, name conventions, contents and documentation of WLUP benchmarks, and an updated list of the main parameters for all cases. First, the benchmarks objectives and types are given. Then, comparisons of results from different WIMSD libraries are included. Finally it is described the program QVALUE for analysis and plot of results. Some examples are given. The set of benchmarks implemented on this work is a fundamental tool for testing new multigroup libraries. (author)

OECD Halden Reactor Project

International Nuclear Information System (INIS)

1983-01-01

The OECD Halden Reactor Project is both the oldest and the only one still in operation of the three major joint undertakings established at the inception of the OECD Nuclear Energy Agency. This publication has been printed in connection with its twenty-fifth anniversary as an international project. After presentation of the history and organization of the project, a thorough description of the past and present activities in the field of fuel performance and process control and surveillance is given. The projects's fuel testing programme is now focuessed on an investigation to define safety margins under normal operations as well as under various kinds of accident situations. Fuel research is also concerned with the characterisation of long term effects with regard to efficiency, operational safety and mapping of reliability and durability in the case of accidents with loss of coolant. In the field of process control and surveillance, research work is directly linked to the use of computers and colour graphics as tools in the control room. A fullscale simulator-based model and experimental control room has been constructed. The first experiments to be carried out in this laboratory will investigate the advantage of analysing alarms before they are presented to the operator. (RF)

Benchmarking electricity distribution

Energy Technology Data Exchange (ETDEWEB)

Watts, K. [Department of Justice and Attorney-General, QLD (Australia)

1995-12-31

Benchmarking has been described as a method of continuous improvement that involves an ongoing and systematic evaluation and incorporation of external products, services and processes recognised as representing best practice. It is a management tool similar to total quality management (TQM) and business process re-engineering (BPR), and is best used as part of a total package. This paper discusses benchmarking models and approaches and suggests a few key performance indicators that could be applied to benchmarking electricity distribution utilities. Some recent benchmarking studies are used as examples and briefly discussed. It is concluded that benchmarking is a strong tool to be added to the range of techniques that can be used by electricity distribution utilities and other organizations in search of continuous improvement, and that there is now a high level of interest in Australia. Benchmarking represents an opportunity for organizations to approach learning from others in a disciplined and highly productive way, which will complement the other micro-economic reforms being implemented in Australia. (author). 26 refs.

OECD Policy Recommendations on Security for Biological Materials

International Nuclear Information System (INIS)

Radisch, J.

2007-01-01

Biomedical innovations derived from research on pathogenic micro-organisms promise astounding health and economic benefits. Some such biological resources employed in the RandD for diagnostic kits, vaccines and therapeutics, however, possess capacity for dual-use; they may be misused to develop biological weapons. Research facilities entrusted with possession of such dual-use materials have a responsibility to comply with biosecurity measures that are designed to prevent loss or theft and thereby reduce the probability of a bioterrorist attack. The OECD has provided a forum for its Member countries to engage in a dialogue of international co-operation with a view to produce policies that achieve a research environment fortified by biosecurity measures and capable of producing health innovations. In 2007, the OECD developed a risk assessment framework and risk management principles for Biological Resource Centres. Ongoing policy work at the OECD will look to design biosecurity guidelines appropriate to a broader range of facilities in possession of dual-use materials, such as university and industrial laboratories.(author)

Benchmarking semantic web technology

CERN Document Server

García-Castro, R

2009-01-01

This book addresses the problem of benchmarking Semantic Web Technologies; first, from a methodological point of view, proposing a general methodology to follow in benchmarking activities over Semantic Web Technologies and, second, from a practical point of view, presenting two international benchmarking activities that involved benchmarking the interoperability of Semantic Web technologies using RDF(S) as the interchange language in one activity and OWL in the other.The book presents in detail how the different resources needed for these interoperability benchmarking activities were defined:

RUNE benchmarks

DEFF Research Database (Denmark)

Peña, Alfredo

This report contains the description of a number of benchmarks with the purpose of evaluating flow models for near-shore wind resource estimation. The benchmarks are designed based on the comprehensive database of observations that the RUNE coastal experiment established from onshore lidar...

MCNP neutron benchmarks

International Nuclear Information System (INIS)

Hendricks, J.S.; Whalen, D.J.; Cardon, D.A.; Uhle, J.L.

1991-01-01

Over 50 neutron benchmark calculations have recently been completed as part of an ongoing program to validate the MCNP Monte Carlo radiation transport code. The new and significant aspects of this work are as follows: These calculations are the first attempt at a validation program for MCNP and the first official benchmarking of version 4 of the code. We believe the chosen set of benchmarks is a comprehensive set that may be useful for benchmarking other radiation transport codes and data libraries. These calculations provide insight into how well neutron transport calculations can be expected to model a wide variety of problems

Kajian Perbandingan Tax Treaty Model: OECD, UN, dan US

OpenAIRE

Rachmawati, Dyna

2003-01-01

The needs of tax treaty arise as International trade growth rapidly due to advancement of information technology. Taxa imposed on income derived from International trade are double. Tax treaty or tax convention is bilateral agreement for the avoidance of double taxation. This agreement arranges taxation rights. There are 3 (three) tax treaty model, which is used as reference to make bilateral agreement for the avoidance of double taxation. The first one is OECD Model made by The OECD...

Adults, Computers and Problem Solving: "What's the Problem?" OECD Skills Studies

Science.gov (United States)

Chung, Ji Eun; Elliott, Stuart

2015-01-01

The "OECD Skills Studies" series aims to provide a strategic approach to skills policies. It presents OECD internationally comparable indicators and policy analysis covering issues such as: quality of education and curricula; transitions from school to work; vocational education and training (VET); employment and unemployment; innovative…

Energy statistics and balances of non-OECD countries 1993-1994

International Nuclear Information System (INIS)

1996-01-01

Contains a compilation of energy supply and consumption statistics for more than 100 non-OECD countries and regions, including developing countries Central and Eastern European countries and the former USSR. Data are expressed in original units and in common units for coal, oil, gas, electricity, heat and combustible renewable and waste. Historical tables for both individual countries and regions summarize data on coal, oil, gas and electricity production, trade and consumption as well as main energy and economic indicators since 1971. Each issue includes definitions of products and flows and notes on the individual countries as well as conversion factors from original units to common energy units. Similar data for OECD are available in the IEA Energy Statistics and Energy Balances of OECD Countries. (author)

OECD eXplorer: Making Regional Statistics Come Alive through a Geo-Visual Web-Tool

Directory of Open Access Journals (Sweden)

Monica Brezzi

2011-06-01

Full Text Available Recent advances in web-enabled graphics technologies have the potential to make a dramatic impact on developing highly interactive Geovisual Analytics applications for the Internet. An emerging and challenging application domain is geovisualization of regional (sub-national statistics. Higher integration drivenby institutional processes and economic globalisation is eroding national borders and creating competition along regional lines in the world market. Sound information at sub-national level and benchmark of regions across borders have gained importance in the policy agenda of many countries. In this paper, we introduce “OECD eXplorer” — an interactive tool for analyzing and communicating gained insights and discoveries about spatial-temporal and multivariate OECD regional data. This database is a potential treasure chest for policy-makers, researchers and citizens to gain a better understanding of a region’s structure and performance and to carry out analysis of territorial trends and disparities based on sound information comparableacross countries. Many approaches and tools have been developed in spatial-related knowledge discovery but generally they do not scale well with dynamic visualization of larger spatial data on the Internet. In this context, we introduce a web-compliant Geovisual Analytics toolkit that supports a broad collection offunctional components for analysis, hypothesis generation and validation. The same tool enables the communicationof results on the basis of a snapshot mechanism that captures, re-uses and shares task-related explorative findings. Further developments underway are in the creation of a generic highly interactive web “eXplorer” platform that can be the foundation for easy customization of similar web applications usingdifferent geographical boundaries and indicators. Given this global dimension, a “generic eXplorer” will be a powerful tool to explore different territorial dimensions

Nuclear power programmes and medium term projections in the OECD area

International Nuclear Information System (INIS)

Miida, J.; Haeussermann, W.; Mankin, S.

1977-01-01

The paper describes nuclear power growth forecasts up to 1985 on an individual country basis for the OECD area, based on present nuclear programmes. For the period between 1985 and the year 2000, no individual countries' estimates are given. The projections for this period are subdivided into three main areas: OECD Europe, North America and OECD Pacific Region. These projections are derived from the presently prevailing estimates concerning total energy growth, the increasing share of electricity requirements in total energy requirements and the growth of the nuclear share in electrical installed capacity. The basic assumptions are discussed and the combination of various possibilities results in upper and lower growth limits, which should include the most likely development. An attempt is also made to describe probable scenarios of nuclear reactor strategies, taking into account developments under way in the OECD area. Finally, the factors liable to influence nuclear power growth in a positive or negative way are briefly analysed

Nuclear fuel behavior activities at the OECD/NEA

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-12-01

The work programme regarding nuclear fuel behavior issues at OECD/NEA is carried out in two sections. The Nuclear Science and Data Bank Division deals with basic phenomena in fuel behavior under normal operating conditions, while the Safety Division concentrates upon regulation and safety issues in fuel behavior. A new task force addressing these latter issues has been set up and will produce a report providing recommendations in this field. The OECD Nuclear Energy Agency jointly with the International Atomic Energy Agency established an International Fuel Performance Experiments Database which is operated by the NEA Data Bank. (author). 1 tab.

Nuclear fuel behavior activities at the OECD/NEA

International Nuclear Information System (INIS)

1997-01-01

The work programme regarding nuclear fuel behavior issues at OECD/NEA is carried out in two sections. The Nuclear Science and Data Bank Division deals with basic phenomena in fuel behavior under normal operating conditions, while the Safety Division concentrates upon regulation and safety issues in fuel behavior. A new task force addressing these latter issues has been set up and will produce a report providing recommendations in this field. The OECD Nuclear Energy Agency jointly with the International Atomic Energy Agency established an International Fuel Performance Experiments Database which is operated by the NEA Data Bank. (author). 1 tab

The OECD and the Expansion of PISA: New Global Modes of Governance in Education

Science.gov (United States)

Sellar, Sam; Lingard, Bob

2014-01-01

This paper examines the expansion of the OECD's Programme for International Student Assessment (PISA) and associated growth in the influence of the OECD's education work. PISA has become one of the OECD's most successful "products" and has both strengthened the role of the Directorate for Education within the organization and enhanced…

Resource recovery and recycling in OECD countries

Energy Technology Data Exchange (ETDEWEB)

MacNeil, J.W.

It was the importance of the economic issues relevant to resource recovery and re-use that prompted OECD to become involved in this general area, and the author proposes in this talk to describe the principal features of the three main approaches to waste management from an economic perspective. These approaches are reduction of waste generation (i.e. birth control) resource recovery and materials recycling or re-use (reincarnation). Most of OECD's work in this area to date has been on the third of these approaches with particular emphasis on the economics of recycling, so somewhat more attention will be devoted to it. Then some conclusions will be drawn concerning possible policy actions to encourage a rational approach to management of this resource.

OECD Halden reactor project

International Nuclear Information System (INIS)

1978-01-01

This report summarizes the activities of the OECD Halden Reactor Project for the year 1976. The main items reported on are: a) the process supervision and control which have focused on core monitoring and control, and operator-process communication; b) the fuel performance and safety behavior which have provided data and analytical descriptions of the thermal, mechanical and chemical behavior of fuel under various operating conditions; c) the reactor operations and d) the administration and finance

Benchmark selection

DEFF Research Database (Denmark)

Hougaard, Jens Leth; Tvede, Mich

2002-01-01

Within a production theoretic framework, this paper considers an axiomatic approach to benchmark selection. It is shown that two simple and weak axioms; efficiency and comprehensive monotonicity characterize a natural family of benchmarks which typically becomes unique. Further axioms are added...... in order to obtain a unique selection...

Benchmarking school nursing practice: the North West Regional Benchmarking Group

OpenAIRE

Littler, Nadine; Mullen, Margaret; Beckett, Helen; Freshney, Alice; Pinder, Lynn

2016-01-01

It is essential that the quality of care is reviewed regularly through robust processes such as benchmarking to ensure all outcomes and resources are evidence-based so that children and young people’s needs are met effectively. This article provides an example of the use of benchmarking in school nursing practice. Benchmarking has been defined as a process for finding, adapting and applying best practices (Camp, 1994). This concept was first adopted in the 1970s ‘from industry where it was us...

OECD - Majandusliku Koostöö ja Arengu Organisatsioon / Kairi Saar, Jane Makke

Index Scriptorium Estoniae

Saar, Kairi, 1973-

2011-01-01

Ülevaade OECD ajaloost, tegevusest, liikmesuse kriteeriumitest (riikide sarnane mõtteviis) ning majandusprognoose, uuringuid ja statistikat sisaldavatest väljaannetest. Eesti liitumisest organisatsiooniga 2010. a., Eesti ja Balti riikide kohta avaldatud väljaanded. Rahvusraamatukogu kui OECD hoiuraamatukogu Eestis

Explaining convergence of oecd welfare states

DEFF Research Database (Denmark)

Schmitt, C.; Starke, Peter

2011-01-01

of conditional convergence helps to both better describe and explain the phenomenon. By applying error correction models, we examine conditional convergence of various types of social expenditure in 21 OECD countries between 1980 and 2005. Our empirical findings go beyond the existing literature in two respects...

An OECD perspective of the role of risk assessment in policy development

Energy Technology Data Exchange (ETDEWEB)

Brydon, Jim [Environmental Health and Safety Division, Organization for Economic Co-operation and Development, Paris (France)

1992-07-01

OECD is an intergovernmental organization bringing together 24 industrialised countries from North America, Western Europe, and the Pacific. Its basic aims include the following: - to achieve high sustainable development, economic growth and employment; - to achieve high economic and social welfare and a high standard of living throughout the OECD area and in non-Member countries: The specialised Agencies and Directorates of OECD cover the full breadth of economic and social activities of concern to the Conference. Under their programmes, there are a variety of activities which involve various elements of qualitative and quantitative risk assessment. Risk assessment methodology, policies options regarding the use of risk assessment, the role of risk assessment in policy and decision-making are all routine in OECD work. This work ranges from, for example, work on the economics of investment policies, through work on food safety, to the analysis of nuclear safety technology.

An OECD perspective of the role of risk assessment in policy development

International Nuclear Information System (INIS)

Brydon, Jim

1992-01-01

OECD is an intergovernmental organization bringing together 24 industrialised countries from North America, Western Europe, and the Pacific. Its basic aims include the following: - to achieve high sustainable development, economic growth and employment; - to achieve high economic and social welfare and a high standard of living throughout the OECD area and in non-Member countries: The specialised Agencies and Directorates of OECD cover the full breadth of economic and social activities of concern to the Conference. Under their programmes, there are a variety of activities which involve various elements of qualitative and quantitative risk assessment. Risk assessment methodology, policies options regarding the use of risk assessment, the role of risk assessment in policy and decision-making are all routine in OECD work. This work ranges from, for example, work on the economics of investment policies, through work on food safety, to the analysis of nuclear safety technology

MACROECONOMIC DETERMINANTS OF TOTAL FACTOR PRODUCTIVITY: NEW GENERATION PANEL DATA ANALYSIS ON OECD COUNTRIES (1996-2015

Directory of Open Access Journals (Sweden)

ÖMER YALÇINKAYA

2016-12-01

Full Text Available Determining the factors which are effective on total factor productivity (TFP increments include the productivity of all factors in the production process and making improvements for these factors via policies have importance concerning speed the potential growth rate up in the long term and making this sustainable. The mediumlong term determinants of TFP are examined in this research for the 1994-2015 period as econometric within the scope of new generation panel data analysis on the OECD countries who are classified as OECD-1 and OECD-2 by their income levels. From this aspect, purposed in this research that to reveal the primary determinants which cause the differentiations between OECD-1 and OECD-2 countries in terms of their long-term economic growth performances and/or income levels. Determined as a result of the research that the effect of the variables which are used to determine the medium-long term determinants of the TFP on OECD-1 and OECD-2 groups parallelly increased and decreased as long as enhancing the representation degree of the knowledge, innovation and technological development level of the variables. These results show that the differentiation of countries in OECD-1 and OECD-2 groups in terms of long-term economic growth and/or income levels is majorly rooted in indicators which are used on behalf of knowledge, innovation, and technological development.

Interactive benchmarking

DEFF Research Database (Denmark)

Lawson, Lartey; Nielsen, Kurt

2005-01-01

We discuss individual learning by interactive benchmarking using stochastic frontier models. The interactions allow the user to tailor the performance evaluation to preferences and explore alternative improvement strategies by selecting and searching the different frontiers using directional...... in the suggested benchmarking tool. The study investigates how different characteristics on dairy farms influences the technical efficiency....

Verification and validation benchmarks.

Energy Technology Data Exchange (ETDEWEB)

Oberkampf, William Louis; Trucano, Timothy Guy

2007-02-01

Verification and validation (V&V) are the primary means to assess the accuracy and reliability of computational simulations. V&V methods and procedures have fundamentally improved the credibility of simulations in several high-consequence fields, such as nuclear reactor safety, underground nuclear waste storage, and nuclear weapon safety. Although the terminology is not uniform across engineering disciplines, code verification deals with assessing the reliability of the software coding, and solution verification deals with assessing the numerical accuracy of the solution to a computational model. Validation addresses the physics modeling accuracy of a computational simulation by comparing the computational results with experimental data. Code verification benchmarks and validation benchmarks have been constructed for a number of years in every field of computational simulation. However, no comprehensive guidelines have been proposed for the construction and use of V&V benchmarks. For example, the field of nuclear reactor safety has not focused on code verification benchmarks, but it has placed great emphasis on developing validation benchmarks. Many of these validation benchmarks are closely related to the operations of actual reactors at near-safety-critical conditions, as opposed to being more fundamental-physics benchmarks. This paper presents recommendations for the effective design and use of code verification benchmarks based on manufactured solutions, classical analytical solutions, and highly accurate numerical solutions. In addition, this paper presents recommendations for the design and use of validation benchmarks, highlighting the careful design of building-block experiments, the estimation of experimental measurement uncertainty for both inputs and outputs to the code, validation metrics, and the role of model calibration in validation. It is argued that the understanding of predictive capability of a computational model is built on the level of

Fiscal Rules and the Composition of Government Expenditures in OECD Countries

Science.gov (United States)

Dahan, Momi; Strawczynski, Michel

2013-01-01

Since the 1990s many OECD countries have adopted fiscal rules. After the adoption of these rules, the ratio of social transfers to government consumption substantially declined, and it recovered following the global economic crisis. Using a sample of 22 OECD countries, we found a negative effect of fiscal rules on the ratio of social transfers to…

OECD migration, welfare and skill selectivity

DEFF Research Database (Denmark)

Pedersen, Peder; Pytlikova, Mariola; Smith, Nina

into 27 OECD countries over the period of 12 years, 1989-2000. Using a fixed effects panel data model, we analyze the determinants of the migration flows during the latest decade. We study whether there are significant selectivity effects in international migration flows, i.e. whether the countries...

The KMAT: Benchmarking Knowledge Management.

Science.gov (United States)

de Jager, Martha

Provides an overview of knowledge management and benchmarking, including the benefits and methods of benchmarking (e.g., competitive, cooperative, collaborative, and internal benchmarking). Arthur Andersen's KMAT (Knowledge Management Assessment Tool) is described. The KMAT is a collaborative benchmarking tool, designed to help organizations make…

Chernobyl and the safety of nuclear reactors in OECD countries

International Nuclear Information System (INIS)

1987-01-01

This report assesses the possible bearing of the Chernobyl accident on the safety of nuclear reactors in OECD countries. It discusses analyses of the accident performed in several countries as well as improvements to the safety of RBMK reactors announced by the USSR. Several remaining questions are identified. The report compares RBMK safety features with those of commercial reactors in OECD countries and evaluates a number of issues raised by the Chernobyl accident

Labor market deregulation and globalization: empirical evidence from OECD countries

OpenAIRE

Potrafke , Niklas

2010-01-01

Abstract This paper empirically investigates the influence of globalization on various aspects of labor market deregulation. I employ the data set by Bassanini and Duval (2006) on labor market institutions in OECD countries and the KOF index of globalization. The data set covers 20 OECD countries in the 1982?2003 period. The results suggest that globalization did neither influence the unemployment replacement rate, the unemployment benefit length, public expenditures on ALMP, the t...

Adjusting health expenditure for military spending and interest payment: Israel and the OECD countries.

Science.gov (United States)

Shmueli, Amir; Israeli, Avi

2013-02-20

Compared to OECD countries, Israel has a remarkably low percentage of GDP and of government expenditure spent on health, which are not reflected in worse national outcomes. Israel is also characterized by a relatively high share of GDP spent on security expenses and payment of public debt. To determine to what extent differences between Israel and the OECD countries in security expenses and payment of the public debt might account for the gaps in the percentage of GDP and of government expenditures spent on health. We compare the percentages of GDP and of government expenditures spent on health in the OECD countries with the respective percentages when using primary civilian GDP and government expenditures (i.e., when security expenses and interest payment are deducted). We compared Israel with the OECD average and examined the ranking of the OECD countries under the two measures over time. While as a percentage of GDP, the national expenditure on health in Israel was well below the average of the OECD countries, as a percentage of primary civilian GDP it was above the average until 2003 and below the average thereafter. When the OECD countries were ranked according to decreasing percent of GDP and of government expenditure spent on health, adjusting for security and debt payment expenditures changed the Israeli rank from 23rd to 17th and from 27th to 25th, respectively. Adjusting for security expenditures and interest payment, Israel's low spending on health as a percentage of GDP and as a percentage of government's spending increases and is closer to the OECD average. Further analysis should explore the effect of additional population and macroeconomic differences on the remaining gaps.

Budgeting and Accounting in OECD Education Systems: A Literature Review. OECD Education Working Papers, No. 128

Science.gov (United States)

Fakharzadeh, Tala

2016-01-01

Recent demographic, economic and political trends have drawn attention to the issue of effectiveness and efficiency in the use of resources in the education sector. In the context of the renewed interest for the optimisation of resource use, this paper attempts to review the literature on budgeting and accounting in OECD education systems. The…

The added value of international benchmarks for fuel performance codes: an illustration on the basis of TRANSURANUS

International Nuclear Information System (INIS)

Van Uffelen, P.; Schubert, A.; Gyeori, C.; Van De Laar, J.

2009-01-01

Safety authorities and fuel designers, as well as nuclear research centers rely heavily on fuel performance codes for predicting the behaviour and life-time of fuel rods. The simulation tools are developed and validated on the basis of experimental results, some of which is in the public domain such as the International Fuel Performance Experiments database of the OECD/NEA and IAEA. Publicly available data constitute an excellent basis for assessing codes themselves, but also to compare codes that are being developed by independent teams. The present report summarises the advantages for the TRANSURANUS code by taking part in previous benchmarks organised by the IAEA, and outlines the preliminary results along with the perspectives of our participation in the current coordinated research project FUMEXIII

Benchmarking in Mobarakeh Steel Company

OpenAIRE

Sasan Ghasemi; Mohammad Nazemi; Mehran Nejati

2008-01-01

Benchmarking is considered as one of the most effective ways of improving performance in companies. Although benchmarking in business organizations is a relatively new concept and practice, it has rapidly gained acceptance worldwide. This paper introduces the benchmarking project conducted in Esfahan's Mobarakeh Steel Company, as the first systematic benchmarking project conducted in Iran. It aims to share the process deployed for the benchmarking project in this company and illustrate how th...

How Activists Use Benchmarks

DEFF Research Database (Denmark)

Seabrooke, Leonard; Wigan, Duncan

2015-01-01

Non-governmental organisations use benchmarks as a form of symbolic violence to place political pressure on firms, states, and international organisations. The development of benchmarks requires three elements: (1) salience, that the community of concern is aware of the issue and views...... are put to the test. The first is a reformist benchmarking cycle where organisations defer to experts to create a benchmark that conforms with the broader system of politico-economic norms. The second is a revolutionary benchmarking cycle driven by expert-activists that seek to contest strong vested...... interests and challenge established politico-economic norms. Differentiating these cycles provides insights into how activists work through organisations and with expert networks, as well as how campaigns on complex economic issues can be mounted and sustained....

Benchmarking in Mobarakeh Steel Company

Directory of Open Access Journals (Sweden)

Sasan Ghasemi

2008-05-01

Full Text Available Benchmarking is considered as one of the most effective ways of improving performance incompanies. Although benchmarking in business organizations is a relatively new concept and practice, ithas rapidly gained acceptance worldwide. This paper introduces the benchmarking project conducted in Esfahan’s Mobarakeh Steel Company, as the first systematic benchmarking project conducted in Iran. It aimsto share the process deployed for the benchmarking project in this company and illustrate how the projectsystematic implementation led to succes.

Aquatic Life Benchmarks

Data.gov (United States)

U.S. Environmental Protection Agency — The Aquatic Life Benchmarks is an EPA-developed set of criteria for freshwater species. These benchmarks are based on toxicity values reviewed by EPA and used in the...

Impact, regulation and health policy implications of physician migration in OECD countries

Directory of Open Access Journals (Sweden)

Simoens Steven

2004-07-01

Full Text Available Abstract Background In the face of rising demand for medical services due to ageing populations, physician migration flows are increasingly affecting the supply of physicians in Organisation for Economic Co-operation and development (OECD countries. This paper offers an integrated perspective on the impact of physician migration on home and host countries and discusses international regulation and policy approaches governing physician migration. Methods Information about migration flows, international regulation and policies governing physician migration were derived from two questionnaires sent to OECD countries, a secondary analysis of EUROSTAT Labour Force Surveys, a literature review and official policy documents of OECD countries. Results OECD countries increasingly perceive immigration of foreign physicians as a way of sustaining their physician workforce. As a result, countries have entered into international agreements regulating physician migration, although their success has been limited due to the imposition of licensing requirements and the protection of vested interests by domestic physicians. OECD countries have therefore adopted specific policies designed to stimulate the immigration of foreign physicians, whilst minimising its negative impact on the home country. Measures promoting immigration have included international recruitment campaigns, less strict immigration requirements and arrangements that foster shared learning between health care systems. Policies restricting the societal costs of physician emigration from developing countries such as good practice guidelines and taxes on host countries have not yet produced their expected effect or in some cases have not been established at all. Conclusions Although OECD countries generally favour long-term policies of national self-sufficiency to sustain their physician workforce, such policies usually co-exist with short-term or medium-term policies to attract foreign physicians

Regulatory Benchmarking

DEFF Research Database (Denmark)

Agrell, Per J.; Bogetoft, Peter

2017-01-01

Benchmarking methods, and in particular Data Envelopment Analysis (DEA), have become well-established and informative tools for economic regulation. DEA is now routinely used by European regulators to set reasonable revenue caps for energy transmission and distribution system operators. The appli......Benchmarking methods, and in particular Data Envelopment Analysis (DEA), have become well-established and informative tools for economic regulation. DEA is now routinely used by European regulators to set reasonable revenue caps for energy transmission and distribution system operators....... The application of bench-marking in regulation, however, requires specific steps in terms of data validation, model specification and outlier detection that are not systematically documented in open publications, leading to discussions about regulatory stability and economic feasibility of these techniques...

Regulatory Benchmarking

DEFF Research Database (Denmark)

Agrell, Per J.; Bogetoft, Peter

2017-01-01

Benchmarking methods, and in particular Data Envelopment Analysis (DEA), have become well-established and informative tools for economic regulation. DEA is now routinely used by European regulators to set reasonable revenue caps for energy transmission and distribution system operators. The appli......Benchmarking methods, and in particular Data Envelopment Analysis (DEA), have become well-established and informative tools for economic regulation. DEA is now routinely used by European regulators to set reasonable revenue caps for energy transmission and distribution system operators....... The application of benchmarking in regulation, however, requires specific steps in terms of data validation, model specification and outlier detection that are not systematically documented in open publications, leading to discussions about regulatory stability and economic feasibility of these techniques...

Private Returns to Tertiary Education - How Does New Zealand Compare to the OECD?

OpenAIRE

James Zuccollo; Sholeh Maani; Bill Kaye-Blake; Lulu Zeng

2013-01-01

How do private returns to tertiary education in New Zealand compare internationally? According to the latest OECD measures, the private rate of return for New Zealand is 8.9%, compared to an OECD average of 12.4%, placing New Zealand toward the bottom of the OECD ranking. The aim of this study is to better understand the reasons for that gap and determine whether the low returns could be considered as problems amenable to policy interventions. We identify a number of measurement issues with t...

Adjusting health expenditure for military spending and interest payment: Israel and the OECD countries

Directory of Open Access Journals (Sweden)

Shmueli Amir

2013-02-01

Full Text Available Abstract Background Compared to OECD countries, Israel has a remarkably low percentage of GDP and of government expenditure spent on health, which are not reflected in worse national outcomes. Israel is also characterized by a relatively high share of GDP spent on security expenses and payment of public debt. Objectives To determine to what extent differences between Israel and the OECD countries in security expenses and payment of the public debt might account for the gaps in the percentage of GDP and of government expenditures spent on health. Methods We compare the percentages of GDP and of government expenditures spent on health in the OECD countries with the respective percentages when using primary civilian GDP and government expenditures (i.e., when security expenses and interest payment are deducted. We compared Israel with the OECD average and examined the ranking of the OECD countries under the two measures over time. Results While as a percentage of GDP, the national expenditure on health in Israel was well below the average of the OECD countries, as a percentage of primary civilian GDP it was above the average until 2003 and below the average thereafter. When the OECD countries were ranked according to decreasing percent of GDP and of government expenditure spent on health, adjusting for security and debt payment expenditures changed the Israeli rank from 23rd to 17th and from 27th to 25th, respectively. Conclusions Adjusting for security expenditures and interest payment, Israel's low spending on health as a percentage of GDP and as a percentage of government's spending increases and is closer to the OECD average. Further analysis should explore the effect of additional population and macroeconomic differences on the remaining gaps.

Benchmarking and the laboratory

Science.gov (United States)

Galloway, M; Nadin, L

2001-01-01

This article describes how benchmarking can be used to assess laboratory performance. Two benchmarking schemes are reviewed, the Clinical Benchmarking Company's Pathology Report and the College of American Pathologists' Q-Probes scheme. The Clinical Benchmarking Company's Pathology Report is undertaken by staff based in the clinical management unit, Keele University with appropriate input from the professional organisations within pathology. Five annual reports have now been completed. Each report is a detailed analysis of 10 areas of laboratory performance. In this review, particular attention is focused on the areas of quality, productivity, variation in clinical practice, skill mix, and working hours. The Q-Probes scheme is part of the College of American Pathologists programme in studies of quality assurance. The Q-Probes scheme and its applicability to pathology in the UK is illustrated by reviewing two recent Q-Probe studies: routine outpatient test turnaround time and outpatient test order accuracy. The Q-Probes scheme is somewhat limited by the small number of UK laboratories that have participated. In conclusion, as a result of the government's policy in the UK, benchmarking is here to stay. Benchmarking schemes described in this article are one way in which pathologists can demonstrate that they are providing a cost effective and high quality service. Key Words: benchmarking • pathology PMID:11477112

Benchmarking for Higher Education.

Science.gov (United States)

Jackson, Norman, Ed.; Lund, Helen, Ed.

The chapters in this collection explore the concept of benchmarking as it is being used and developed in higher education (HE). Case studies and reviews show how universities in the United Kingdom are using benchmarking to aid in self-regulation and self-improvement. The chapters are: (1) "Introduction to Benchmarking" (Norman Jackson…

Verification and validation benchmarks

International Nuclear Information System (INIS)

Oberkampf, William Louis; Trucano, Timothy Guy

2007-01-01

Verification and validation (V and V) are the primary means to assess the accuracy and reliability of computational simulations. V and V methods and procedures have fundamentally improved the credibility of simulations in several high-consequence fields, such as nuclear reactor safety, underground nuclear waste storage, and nuclear weapon safety. Although the terminology is not uniform across engineering disciplines, code verification deals with assessing the reliability of the software coding, and solution verification deals with assessing the numerical accuracy of the solution to a computational model. Validation addresses the physics modeling accuracy of a computational simulation by comparing the computational results with experimental data. Code verification benchmarks and validation benchmarks have been constructed for a number of years in every field of computational simulation. However, no comprehensive guidelines have been proposed for the construction and use of V and V benchmarks. For example, the field of nuclear reactor safety has not focused on code verification benchmarks, but it has placed great emphasis on developing validation benchmarks. Many of these validation benchmarks are closely related to the operations of actual reactors at near-safety-critical conditions, as opposed to being more fundamental-physics benchmarks. This paper presents recommendations for the effective design and use of code verification benchmarks based on manufactured solutions, classical analytical solutions, and highly accurate numerical solutions. In addition, this paper presents recommendations for the design and use of validation benchmarks, highlighting the careful design of building-block experiments, the estimation of experimental measurement uncertainty for both inputs and outputs to the code, validation metrics, and the role of model calibration in validation. It is argued that the understanding of predictive capability of a computational model is built on the

Verification and validation benchmarks

International Nuclear Information System (INIS)

Oberkampf, William L.; Trucano, Timothy G.

2008-01-01

Verification and validation (V and V) are the primary means to assess the accuracy and reliability of computational simulations. V and V methods and procedures have fundamentally improved the credibility of simulations in several high-consequence fields, such as nuclear reactor safety, underground nuclear waste storage, and nuclear weapon safety. Although the terminology is not uniform across engineering disciplines, code verification deals with assessing the reliability of the software coding, and solution verification deals with assessing the numerical accuracy of the solution to a computational model. Validation addresses the physics modeling accuracy of a computational simulation by comparing the computational results with experimental data. Code verification benchmarks and validation benchmarks have been constructed for a number of years in every field of computational simulation. However, no comprehensive guidelines have been proposed for the construction and use of V and V benchmarks. For example, the field of nuclear reactor safety has not focused on code verification benchmarks, but it has placed great emphasis on developing validation benchmarks. Many of these validation benchmarks are closely related to the operations of actual reactors at near-safety-critical conditions, as opposed to being more fundamental-physics benchmarks. This paper presents recommendations for the effective design and use of code verification benchmarks based on manufactured solutions, classical analytical solutions, and highly accurate numerical solutions. In addition, this paper presents recommendations for the design and use of validation benchmarks, highlighting the careful design of building-block experiments, the estimation of experimental measurement uncertainty for both inputs and outputs to the code, validation metrics, and the role of model calibration in validation. It is argued that the understanding of predictive capability of a computational model is built on the

Benchmarking and Learning in Public Healthcare

DEFF Research Database (Denmark)

Buckmaster, Natalie; Mouritsen, Jan

2017-01-01

This research investigates the effects of learning-oriented benchmarking in public healthcare settings. Benchmarking is a widely adopted yet little explored accounting practice that is part of the paradigm of New Public Management. Extant studies are directed towards mandated coercive benchmarking...... applications. The present study analyses voluntary benchmarking in a public setting that is oriented towards learning. The study contributes by showing how benchmarking can be mobilised for learning and offers evidence of the effects of such benchmarking for performance outcomes. It concludes that benchmarking...... can enable learning in public settings but that this requires actors to invest in ensuring that benchmark data are directed towards improvement....

Benchmark job – Watch out!

CERN Multimedia

Staff Association

2017-01-01

On 12 December 2016, in Echo No. 259, we already discussed at length the MERIT and benchmark jobs. Still, we find that a couple of issues warrant further discussion. Benchmark job – administrative decision on 1 July 2017 On 12 January 2017, the HR Department informed all staff members of a change to the effective date of the administrative decision regarding benchmark jobs. The benchmark job title of each staff member will be confirmed on 1 July 2017, instead of 1 May 2017 as originally announced in HR’s letter on 18 August 2016. Postponing the administrative decision by two months will leave a little more time to address the issues related to incorrect placement in a benchmark job. Benchmark job – discuss with your supervisor, at the latest during the MERIT interview In order to rectify an incorrect placement in a benchmark job, it is essential that the supervisor and the supervisee go over the assigned benchmark job together. In most cases, this placement has been done autom...

Benchmarking reference services: an introduction.

Science.gov (United States)

Marshall, J G; Buchanan, H S

1995-01-01

Benchmarking is based on the common sense idea that someone else, either inside or outside of libraries, has found a better way of doing certain things and that your own library's performance can be improved by finding out how others do things and adopting the best practices you find. Benchmarking is one of the tools used for achieving continuous improvement in Total Quality Management (TQM) programs. Although benchmarking can be done on an informal basis, TQM puts considerable emphasis on formal data collection and performance measurement. Used to its full potential, benchmarking can provide a common measuring stick to evaluate process performance. This article introduces the general concept of benchmarking, linking it whenever possible to reference services in health sciences libraries. Data collection instruments that have potential application in benchmarking studies are discussed and the need to develop common measurement tools to facilitate benchmarking is emphasized.

Migration in OECD countries: Labour Market Impact and Integration Issues. OECD Economics Department Working Papers, No. 562

Science.gov (United States)

Jean, Sebastien; Causa, Orsetta; Jimenez, Miguel; Wanner, Isabelle

2007-01-01

Immigration pressures are increasing in most OECD countries. This paper investigates the consequences of immigration for natives' labour market outcomes, as well as issues linked to immigrants' integration in the host country labour market. Changes in the share of immigrants in the labour force may have a distributive impact on natives' wages, and…

Labour Market Performance, Income Inequality and Poverty in OECD Countries. OECD Economics Department Working Papers, No. 500

Science.gov (United States)

Burniaux, Jean-Marc; Padrini, Flavio; Brandt, Nicola

2006-01-01

There have been concerns that employment-enhancing reforms along the lines of the 1994 OECD Jobs Strategy could inadvertently lead to increased income inequality and poverty. This paper focuses on the impact of institutions and redistributive policies on inequality and poverty with the view of assessing whether a trade-off between better labour…

Internet based benchmarking

DEFF Research Database (Denmark)

Bogetoft, Peter; Nielsen, Kurt

2005-01-01

We discuss the design of interactive, internet based benchmarking using parametric (statistical) as well as nonparametric (DEA) models. The user receives benchmarks and improvement potentials. The user is also given the possibility to search different efficiency frontiers and hereby to explore...

Enhancement of international cooperation for utilization of OECD/NEA Data BAnk

International Nuclear Information System (INIS)

Lee, HaeCho; Chang, JongHwa; Kang, SinBok; Song, TaeGil; Ko, YoungChul; Kim, JinHee; Moon, DongSup; Hwang, HyeSun

2008-06-01

The purpose of research is to register Korean computer codes at OECD/NEA Data Bank and to promote cooperation on use of the computer codes and libraries between the international organization and foreign countries. - 10 computer codes related to nuclear industry have been registered at and supplied to OECD/NEA through this project, which is regarded as good example of close international cooperation among the member states of OECD/NEA - This project has provided member states with motives on creating human networks and high level of expertise between domestic code developers and foreign users of the codes - Expert group in the field of nuclear related computer codes is formed in this project, that is also beneficial for Korea in preparation of exporting and marketing nuclear technologies in the world

Enhancement of international cooperation for utilization of OECD/NEA Data BAnk

Energy Technology Data Exchange (ETDEWEB)

Lee, HaeCho; Chang, JongHwa; Kang, SinBok; Song, TaeGil; Ko, YoungChul; Kim, JinHee; Moon, DongSup; Hwang, HyeSun

2008-06-15

The purpose of research is to register Korean computer codes at OECD/NEA Data Bank and to promote cooperation on use of the computer codes and libraries between the international organization and foreign countries. - 10 computer codes related to nuclear industry have been registered at and supplied to OECD/NEA through this project, which is regarded as good example of close international cooperation among the member states of OECD/NEA - This project has provided member states with motives on creating human networks and high level of expertise between domestic code developers and foreign users of the codes - Expert group in the field of nuclear related computer codes is formed in this project, that is also beneficial for Korea in preparation of exporting and marketing nuclear technologies in the world.

Toxicological Benchmarks for Wildlife

Energy Technology Data Exchange (ETDEWEB)

Sample, B.E. Opresko, D.M. Suter, G.W.

1993-01-01

Ecological risks of environmental contaminants are evaluated by using a two-tiered process. In the first tier, a screening assessment is performed where concentrations of contaminants in the environment are compared to no observed adverse effects level (NOAEL)-based toxicological benchmarks. These benchmarks represent concentrations of chemicals (i.e., concentrations presumed to be nonhazardous to the biota) in environmental media (water, sediment, soil, food, etc.). While exceedance of these benchmarks does not indicate any particular level or type of risk, concentrations below the benchmarks should not result in significant effects. In practice, when contaminant concentrations in food or water resources are less than these toxicological benchmarks, the contaminants may be excluded from further consideration. However, if the concentration of a contaminant exceeds a benchmark, that contaminant should be retained as a contaminant of potential concern (COPC) and investigated further. The second tier in ecological risk assessment, the baseline ecological risk assessment, may use toxicological benchmarks as part of a weight-of-evidence approach (Suter 1993). Under this approach, based toxicological benchmarks are one of several lines of evidence used to support or refute the presence of ecological effects. Other sources of evidence include media toxicity tests, surveys of biota (abundance and diversity), measures of contaminant body burdens, and biomarkers. This report presents NOAEL- and lowest observed adverse effects level (LOAEL)-based toxicological benchmarks for assessment of effects of 85 chemicals on 9 representative mammalian wildlife species (short-tailed shrew, little brown bat, meadow vole, white-footed mouse, cottontail rabbit, mink, red fox, and whitetail deer) or 11 avian wildlife species (American robin, rough-winged swallow, American woodcock, wild turkey, belted kingfisher, great blue heron, barred owl, barn owl, Cooper's hawk, and red

Computer simulation of Masurca critical and subcritical experiments. Muse-4 benchmark. Final report

International Nuclear Information System (INIS)

2006-01-01

The efficient and safe management of spent fuel produced during the operation of commercial nuclear power plants is an important issue. In this context, partitioning and transmutation (P and T) of minor actinides and long-lived fission products can play an important role, significantly reducing the burden on geological repositories of nuclear waste and allowing their more effective use. Various systems, including existing reactors, fast reactors and advanced systems have been considered to optimise the transmutation scheme. Recently, many countries have shown interest in accelerator-driven systems (ADS) due to their potential for transmutation of minor actinides. Much R and D work is still required in order to demonstrate their desired capability as a whole system, and the current analysis methods and nuclear data for minor actinide burners are not as well established as those for conventionally-fuelled systems. Recognizing a need for code and data validation in this area, the Nuclear Science Committee of the OECD/NEA has organised various theoretical benchmarks on ADS burners. Many improvements and clarifications concerning nuclear data and calculation methods have been achieved. However, some significant discrepancies for important parameters are not fully understood and still require clarification. Therefore, this international benchmark based on MASURCA experiments, which were carried out under the auspices of the EC 5. Framework Programme, was launched in December 2001 in co-operation with the CEA (France) and CIEMAT (Spain). The benchmark model was oriented to compare simulation predictions based on available codes and nuclear data libraries with experimental data related to TRU transmutation, criticality constants and time evolution of the neutronic flux following source variation, within liquid metal fast subcritical systems. A total of 16 different institutions participated in this first experiment based benchmark, providing 34 solutions. The large number

Benchmarking in academic pharmacy departments.

Science.gov (United States)

Bosso, John A; Chisholm-Burns, Marie; Nappi, Jean; Gubbins, Paul O; Ross, Leigh Ann

2010-10-11

Benchmarking in academic pharmacy, and recommendations for the potential uses of benchmarking in academic pharmacy departments are discussed in this paper. Benchmarking is the process by which practices, procedures, and performance metrics are compared to an established standard or best practice. Many businesses and industries use benchmarking to compare processes and outcomes, and ultimately plan for improvement. Institutions of higher learning have embraced benchmarking practices to facilitate measuring the quality of their educational and research programs. Benchmarking is used internally as well to justify the allocation of institutional resources or to mediate among competing demands for additional program staff or space. Surveying all chairs of academic pharmacy departments to explore benchmarking issues such as department size and composition, as well as faculty teaching, scholarly, and service productivity, could provide valuable information. To date, attempts to gather this data have had limited success. We believe this information is potentially important, urge that efforts to gather it should be continued, and offer suggestions to achieve full participation.

Benchmarking: applications to transfusion medicine.

Science.gov (United States)

Apelseth, Torunn Oveland; Molnar, Laura; Arnold, Emmy; Heddle, Nancy M

2012-10-01

Benchmarking is as a structured continuous collaborative process in which comparisons for selected indicators are used to identify factors that, when implemented, will improve transfusion practices. This study aimed to identify transfusion medicine studies reporting on benchmarking, summarize the benchmarking approaches used, and identify important considerations to move the concept of benchmarking forward in the field of transfusion medicine. A systematic review of published literature was performed to identify transfusion medicine-related studies that compared at least 2 separate institutions or regions with the intention of benchmarking focusing on 4 areas: blood utilization, safety, operational aspects, and blood donation. Forty-five studies were included: blood utilization (n = 35), safety (n = 5), operational aspects of transfusion medicine (n = 5), and blood donation (n = 0). Based on predefined criteria, 7 publications were classified as benchmarking, 2 as trending, and 36 as single-event studies. Three models of benchmarking are described: (1) a regional benchmarking program that collects and links relevant data from existing electronic sources, (2) a sentinel site model where data from a limited number of sites are collected, and (3) an institutional-initiated model where a site identifies indicators of interest and approaches other institutions. Benchmarking approaches are needed in the field of transfusion medicine. Major challenges include defining best practices and developing cost-effective methods of data collection. For those interested in initiating a benchmarking program, the sentinel site model may be most effective and sustainable as a starting point, although the regional model would be the ideal goal. Copyright © 2012 Elsevier Inc. All rights reserved.

Comparison of approximate electrical energy generating costs in OECD countries

International Nuclear Information System (INIS)

Stevens, G.H.; Bertel, E.

1996-01-01

Costs of power generating in nuclear power plants have been predicted taking into account all factors connected with investment, maintenance, exploitation and decommissioning, basing on last OECD report. The costs have been compared with alternative solutions. In majority of OECD countries the direct costs of electricity generation are very close for nuclear fossil-fuel and gas power plants. All indirect costs such as environmental impact, public health hazard, waste management, accident risk and also public acceptance for nuclear power have been discussed. 13 refs, 5 tabs

OECD : Euroopa peaks laenuraha odava hoidma / Sirje Rank

Index Scriptorium Estoniae

Rank, Sirje, 1966-

2002-01-01

USA majanduse kiire toibumine võib varsti tuua laenuintresside tõusu, Euroopa Keskpank peaks vähemalt aasta lõpuni ootama ja laskma kasvul juurduda. Diagramm: OECD tõstis majanduskasvu prognoosi. Maksukoormus

OECD Skills Outlook 2013: First Results from the Survey of Adult Skills

Science.gov (United States)

OECD Publishing, 2013

2013-01-01

This first "OECD Skills Outlook" presents the initial results of the Survey of Adult Skills (PIAAC), which evaluates the skills of adults in 22 OECD member countries and two partner countries. The PIAAC survey was designed to provide insights into the availability of some key skills and how they are used at work and at home through the…

Comparison of Early Childhood Education (Preschool Education) in Turkey and OECD Countries

Science.gov (United States)

Ozgan, Habib

2010-01-01

In this study, it was aimed to evaluate how the difference the early childhood education in Turkey and OECD countries. The outstanding point evaluated by the teachers about the difference between the education in Turkey and that in OECD countries and the conditions needing to be improved was the compare of age groups benefiting from the services…

The investigation of the national views for the strategic plan 2005-2009 of OECD/NEA

International Nuclear Information System (INIS)

Ko, H. S.; Ryu, J. S.; Lee, K. S.; Yang, M. H.

2004-01-01

OECD/NEA has been developing the Strategic Plan of 2005-2009 which will be used as the guidelines of NEA activities for this period. Korean government is of the view that national interests in the cooperation with OECD/NEA become important and are needed to be reflected to this Strategic Plan. We has prepared and suggested Korean proposal for the Strategic Plan of OECD/NEA

Benchmark Evaluation of Dounreay Prototype Fast Reactor Minor Actinide Depletion Measurements

Energy Technology Data Exchange (ETDEWEB)

Hess, J. D.; Gauld, I. C.; Gulliford, J.; Hill, I.; Okajima, S.

2017-01-01

Historic measurements of actinide samples in the Dounreay Prototype Fast Reactor (PFR) are of interest for modern nuclear data and simulation validation. Samples of various higher-actinide isotopes were irradiated for 492 effective full-power days and radiochemically assayed at Oak Ridge National Laboratory (ORNL) and Japan Atomic Energy Research Institute (JAERI). Limited data were available regarding the PFR irradiation; a six-group neutron spectra was available with some power history data to support a burnup depletion analysis validation study. Under the guidance of the Organisation for Economic Co-Operation and Development Nuclear Energy Agency (OECD NEA), the International Reactor Physics Experiment Evaluation Project (IRPhEP) and Spent Fuel Isotopic Composition (SFCOMPO) Project are collaborating to recover all measurement data pertaining to these measurements, including collaboration with the United Kingdom to obtain pertinent reactor physics design and operational history data. These activities will produce internationally peer-reviewed benchmark data to support validation of minor actinide cross section data and modern neutronic simulation of fast reactors with accompanying fuel cycle activities such as transportation, recycling, storage, and criticality safety.

Income inequality and obesity prevalence among OECD countries.

Science.gov (United States)

Su, Dejun; Esqueda, Omar A; Li, Lifeng; Pagán, José A

2012-07-01

Using recent pooled data from the World Health Organization Global Infobase and the World Factbook compiled by the Central Intelligence Agency of the United States, this study assesses the relation between income inequality and obesity prevalence among 31 OECD countries through a series of bivariate and multivariate linear regressions. The United States and Mexico well lead OECD countries in both obesity prevalence and income inequality. A sensitivity analysis suggests that the inclusion or exclusion of these two extreme cases can fundamentally change the findings. When the two countries are included, the results reveal a positive correlation between income inequality and obesity prevalence. This correlation is more salient among females than among males. Income inequality alone is associated with 16% and 35% of the variations in male and female obesity rates, respectively, across OECD countries in 2010. Higher levels of income inequality in the 2005-2010 period were associated with a more rapid increase in obesity prevalence from 2002 to 2010. These associations, however, virtually disappear when the US and Mexico have been excluded from the analysis. Findings from this study underscore the importance of assessing the impact of extreme cases on the relation between income inequality and health outcomes. The potential pathways from income inequality to the alarmingly high rates of obesity in the cases of the US and Mexico warrant further research.

Pensions at a glance 2015 OECD and G20 indicators

CERN Document Server

2016-01-01

The 10-year anniversary edition of Pensions at a Glance highlights the pension reforms undertaken by OECD and G20 countries over the last two years. Two special chapters provide deeper analysis of first-tier pension schemes and of the impact of short or interrupted careers, due to late entry into employment, childcare or unemployment, on pension entitlements. Another chapter analyses the sensitivity of long-term pension replacement rates on various parameters. A range of indicators for comparing pension policies and their outcomes between OECD and G20 countries is also provided.

Taxation and business environment as drivers of foreign direct investment in OECD countries

Czech Academy of Sciences Publication Activity Database

Hájková, Dana; Nicoletti, G.; Vartia, L.; Yoo, K.-Y.

2006/2, č. 43 (2006), s. 7-38 ISSN 0255-0822 R&D Projects: GA MŠk LC542 Institutional research plan: CEZ:AV0Z70850503 Keywords : taxation * foreign direct investment * OECD Subject RIV: AH - Economics http://www.oecd.org/dataoecd/62/30/40505831.pdf

EGS4 benchmark program

International Nuclear Information System (INIS)

Yasu, Y.; Hirayama, H.; Namito, Y.; Yashiro, S.

1995-01-01

This paper proposes EGS4 Benchmark Suite which consists of three programs called UCSAMPL4, UCSAMPL4I and XYZDOS. This paper also evaluates optimization methods of recent RISC/UNIX systems, such as IBM, HP, DEC, Hitachi and Fujitsu, for the benchmark suite. When particular compiler option and math library were included in the evaluation process, system performed significantly better. Observed performance of some of the RISC/UNIX systems were beyond some so-called Mainframes of IBM, Hitachi or Fujitsu. The computer performance of EGS4 Code System on an HP9000/735 (99MHz) was defined to be the unit of EGS4 Unit. The EGS4 Benchmark Suite also run on various PCs such as Pentiums, i486 and DEC alpha and so forth. The performance of recent fast PCs reaches that of recent RISC/UNIX systems. The benchmark programs have been evaluated with correlation of industry benchmark programs, namely, SPECmark. (author)

Benchmarking ENDF/B-VII.0

International Nuclear Information System (INIS)

Marck, Steven C. van der

2006-01-01

The new major release VII.0 of the ENDF/B nuclear data library has been tested extensively using benchmark calculations. These were based upon MCNP-4C3 continuous-energy Monte Carlo neutronics simulations, together with nuclear data processed using the code NJOY. Three types of benchmarks were used, viz., criticality safety benchmarks (fusion) shielding benchmarks, and reference systems for which the effective delayed neutron fraction is reported. For criticality safety, more than 700 benchmarks from the International Handbook of Criticality Safety Benchmark Experiments were used. Benchmarks from all categories were used, ranging from low-enriched uranium, compound fuel, thermal spectrum ones (LEU-COMP-THERM), to mixed uranium-plutonium, metallic fuel, fast spectrum ones (MIX-MET-FAST). For fusion shielding many benchmarks were based on IAEA specifications for the Oktavian experiments (for Al, Co, Cr, Cu, LiF, Mn, Mo, Si, Ti, W, Zr), Fusion Neutronics Source in Japan (for Be, C, N, O, Fe, Pb), and Pulsed Sphere experiments at Lawrence Livermore National Laboratory (for 6 Li, 7 Li, Be, C, N, O, Mg, Al, Ti, Fe, Pb, D 2 O, H 2 O, concrete, polyethylene and teflon). For testing delayed neutron data more than thirty measurements in widely varying systems were used. Among these were measurements in the Tank Critical Assembly (TCA in Japan) and IPEN/MB-01 (Brazil), both with a thermal spectrum, and two cores in Masurca (France) and three cores in the Fast Critical Assembly (FCA, Japan), all with fast spectra. In criticality safety, many benchmarks were chosen from the category with a thermal spectrum, low-enriched uranium, compound fuel (LEU-COMP-THERM), because this is typical of most current-day reactors, and because these benchmarks were previously underpredicted by as much as 0.5% by most nuclear data libraries (such as ENDF/B-VI.8, JEFF-3.0). The calculated results presented here show that this underprediction is no longer there for ENDF/B-VII.0. The average over 257

California commercial building energy benchmarking

Energy Technology Data Exchange (ETDEWEB)

Kinney, Satkartar; Piette, Mary Ann

2003-07-01

Building energy benchmarking is the comparison of whole-building energy use relative to a set of similar buildings. It provides a useful starting point for individual energy audits and for targeting buildings for energy-saving measures in multiple-site audits. Benchmarking is of interest and practical use to a number of groups. Energy service companies and performance contractors communicate energy savings potential with ''typical'' and ''best-practice'' benchmarks while control companies and utilities can provide direct tracking of energy use and combine data from multiple buildings. Benchmarking is also useful in the design stage of a new building or retrofit to determine if a design is relatively efficient. Energy managers and building owners have an ongoing interest in comparing energy performance to others. Large corporations, schools, and government agencies with numerous facilities also use benchmarking methods to compare their buildings to each other. The primary goal of Task 2.1.1 Web-based Benchmarking was the development of a web-based benchmarking tool, dubbed Cal-Arch, for benchmarking energy use in California commercial buildings. While there were several other benchmarking tools available to California consumers prior to the development of Cal-Arch, there were none that were based solely on California data. Most available benchmarking information, including the Energy Star performance rating, were developed using DOE's Commercial Building Energy Consumption Survey (CBECS), which does not provide state-level data. Each database and tool has advantages as well as limitations, such as the number of buildings and the coverage by type, climate regions and end uses. There is considerable commercial interest in benchmarking because it provides an inexpensive method of screening buildings for tune-ups and retrofits. However, private companies who collect and manage consumption data are concerned that the

Benchmarking in Foodservice Operations

National Research Council Canada - National Science Library

Johnson, Bonnie

1998-01-01

The objective of this study was to identify usage of foodservice performance measures, important activities in foodservice benchmarking, and benchmarking attitudes, beliefs, and practices by foodservice directors...

Applying market-based instruments to environmental policies in China and OECD countries

International Nuclear Information System (INIS)

1998-01-01

China's rapid economic growth since the late 1970s has been a remarkable achievement, and is projected to continue. However, this prospect could be compromised by pollution of air, water, and land, the unsustainable exploitation of natural resources, and the environmental impacts on public health. Air pollution associated with the use of coal for energy and industrial purposes is a particularly serious challenge in China, with important domestic and transboundary implications. This book presents papers from an international workshop co-sponsored by the OECD and China's National Environmental Protection Agency on the application of economic instruments to control air pollution in China and OECD countries. It presents the state-of-the-air in this field, based upon contributions from Chinese and OECD country policy makers and experts

Benchmarking, benchmarks, or best practices? Applying quality improvement principles to decrease surgical turnaround time.

Science.gov (United States)

Mitchell, L

1996-01-01

The processes of benchmarking, benchmark data comparative analysis, and study of best practices are distinctly different. The study of best practices is explained with an example based on the Arthur Andersen & Co. 1992 "Study of Best Practices in Ambulatory Surgery". The results of a national best practices study in ambulatory surgery were used to provide our quality improvement team with the goal of improving the turnaround time between surgical cases. The team used a seven-step quality improvement problem-solving process to improve the surgical turnaround time. The national benchmark for turnaround times between surgical cases in 1992 was 13.5 minutes. The initial turnaround time at St. Joseph's Medical Center was 19.9 minutes. After the team implemented solutions, the time was reduced to an average of 16.3 minutes, an 18% improvement. Cost-benefit analysis showed a potential enhanced revenue of approximately $300,000, or a potential savings of $10,119. Applying quality improvement principles to benchmarking, benchmarks, or best practices can improve process performance. Understanding which form of benchmarking the institution wishes to embark on will help focus a team and use appropriate resources. Communicating with professional organizations that have experience in benchmarking will save time and money and help achieve the desired results.

Methods to stimulate national and sub-national benchmarking through international health system performance comparisons: a Canadian approach.

Science.gov (United States)

Veillard, Jeremy; Moses McKeag, Alexandra; Tipper, Brenda; Krylova, Olga; Reason, Ben

2013-09-01

This paper presents, discusses and evaluates methods used by the Canadian Institute for Health Information to present health system performance international comparisons in ways that facilitate their understanding by the public and health system policy-makers and can stimulate performance benchmarking. We used statistical techniques to normalize the results and present them on a standardized scale facilitating understanding of results. We compared results to the OECD average, and to benchmarks. We also applied various data quality rules to ensure the validity of results. In order to evaluate the impact of the public release of these results, we used quantitative and qualitative methods and documented other types of impact. We were able to present results for performance indicators and dimensions at national and sub-national levels; develop performance profiles for each Canadian province; and show pan-Canadian performance patterns for specific performance indicators. The results attracted significant media attention at national level and reactions from various stakeholders. Other impacts such as requests for additional analysis and improvement in data timeliness were observed. The methods used seemed attractive to various audiences in the Canadian context and achieved the objectives originally defined. These methods could be refined and applied in different contexts. Copyright © 2013 The Authors. Published by Elsevier Ireland Ltd.. All rights reserved.

The VENUS-7 benchmarks. Results from state-of-the-art transport codes and nuclear data

International Nuclear Information System (INIS)

Zwermann, Winfried; Pautz, Andreas; Timm, Wolf

2010-01-01

For the validation of both nuclear data and computational methods, comparisons with experimental data are necessary. Most advantageous are assemblies where not only the multiplication factors or critical parameters were measured, but also additional quantities like reactivity differences or pin-wise fission rate distributions have been assessed. Currently there is a comprehensive activity to evaluate such measure-ments and incorporate them in the International Handbook of Evaluated Reactor Physics Benchmark Experiments. A large number of such experiments was performed at the VENUS zero power reactor at SCK/CEN in Belgium in the sixties and seventies. The VENUS-7 series was specified as an international benchmark within the OECD/NEA Working Party on Scientific Issues of Reactor Systems (WPRS), and results obtained with various codes and nuclear data evaluations were summarized. In the present paper, results of high-accuracy transport codes with full spatial resolution with up-to-date nuclear data libraries from the JEFF and ENDF/B evaluations are presented. The comparisons of the results, both code-to-code and with the measured data are augmented by uncertainty and sensitivity analyses with respect to nuclear data uncertainties. For the multiplication factors, these are performed with the TSUNAMI-3D code from the SCALE system. In addition, uncertainties in the reactivity differences are analyzed with the TSAR code which is available from the current SCALE-6 version. (orig.)

Automatic generation of 3D fine mesh geometries for the analysis of the venus-3 shielding benchmark experiment with the Tort code

International Nuclear Information System (INIS)

Pescarini, M.; Orsi, R.; Martinelli, T.

2003-01-01

In many practical radiation transport applications today the cost for solving refined, large size and complex multi-dimensional problems is not so much computing but is linked to the cumbersome effort required by an expert to prepare a detailed geometrical model, verify and validate that it is correct and represents, to a specified tolerance, the real design or facility. This situation is, in particular, relevant and frequent in reactor core criticality and shielding calculations, with three-dimensional (3D) general purpose radiation transport codes, requiring a very large number of meshes and high performance computers. The need for developing tools that make easier the task to the physicist or engineer, by reducing the time required, by facilitating through effective graphical display the verification of correctness and, finally, that help the interpretation of the results obtained, has clearly emerged. The paper shows the results of efforts in this field through detailed simulations of a complex shielding benchmark experiment. In the context of the activities proposed by the OECD/NEA Nuclear Science Committee (NSC) Task Force on Computing Radiation Dose and Modelling of Radiation-Induced Degradation of Reactor Components (TFRDD), the ENEA-Bologna Nuclear Data Centre contributed with an analysis of the VENUS-3 low-flux neutron shielding benchmark experiment (SCK/CEN-Mol, Belgium). One of the targets of the work was to test the BOT3P system, originally developed at the Nuclear Data Centre in ENEA-Bologna and actually released to OECD/NEA Data Bank for free distribution. BOT3P, ancillary system of the DORT (2D) and TORT (3D) SN codes, permits a flexible automatic generation of spatial mesh grids in Cartesian or cylindrical geometry, through combinatorial geometry algorithms, following a simplified user-friendly approach. This system demonstrated its validity also in core criticality analyses, as for example the Lewis MOX fuel benchmark, permitting to easily

Benchmarking i den offentlige sektor

DEFF Research Database (Denmark)

Bukh, Per Nikolaj; Dietrichson, Lars; Sandalgaard, Niels

2008-01-01

I artiklen vil vi kort diskutere behovet for benchmarking i fraværet af traditionelle markedsmekanismer. Herefter vil vi nærmere redegøre for, hvad benchmarking er med udgangspunkt i fire forskellige anvendelser af benchmarking. Regulering af forsyningsvirksomheder vil blive behandlet, hvorefter...

Regional Competitive Intelligence: Benchmarking and Policymaking

OpenAIRE

Huggins , Robert

2010-01-01

Benchmarking exercises have become increasingly popular within the sphere of regional policymaking in recent years. The aim of this paper is to analyse the concept of regional benchmarking and its links with regional policymaking processes. It develops a typology of regional benchmarking exercises and regional benchmarkers, and critically reviews the literature, both academic and policy oriented. It is argued that critics who suggest regional benchmarking is a flawed concept and technique fai...

OECD märkab Eesti edusamme / Signe Leesmann

Index Scriptorium Estoniae

Leesmann, Signe

2002-01-01

Vaatamata probleemidele on Eesti ettevõtluskliima paranenud, mille taga näeb OECD Eestisse tulnud välisinvesteeringute ning ekspordi kasvu. Diagrammid: Ettevõtete arv. Ettevõtete struktuur töötajate arvu järgi

OECD/NEA component operational experience, degradation and ageing project

International Nuclear Information System (INIS)

Gott, K.; Nevander, O.; Riznic, J.; Lydell, B.

2015-01-01

Several OECD Member Countries have agreed to establish the OECD/NEA 'Component Operational Experience, Degradation and Ageing Programme' (CODAP) to encourage multilateral co-operation in the collection and analysis of data relating to degradation and failure of metallic piping and non-piping metallic passive components in commercial nuclear power plants. The scope of the data collection includes service-induced wall thinning, part through-wall cracks, through-wall cracks with and without active leakage, and instances of significant degradation of metallic passive components, including piping pressure boundary integrity. CODAP is the continuation of the 2002-2011 'OECD/NEA Pipe Failure Data Exchange Project' (OPDE) and the Stress Corrosion Cracking Working Group of the 2006-2010 - OECD/NEA SCC and Cable Ageing project - (SCAP). OPDE was formally launched in May 2002. Upon completion of the 3. Term (May 2011), the OPDE project was officially closed to be succeeded by CODAP. In May 2011, 13 countries signed the CODAP first Term agreement. The first Term (2011-2014) work plan includes the development of a web-based relational event database on passive, metallic components in commercial nuclear power plants, a web-based knowledge base on material degradation, codes and standards relating to structural integrity and national practices for managing material degradation. The work plan also addresses the preparation of Topical Reports to foster technical cooperation and to deepen the understanding of national differences in ageing management. These Topical Reports are in the public domain and available for download on the NEA web site. Published in 2014, a first Topical Report addressed flow accelerated corrosion (FAC) of carbon steel and low alloy steel piping. A second Topical Report addresses operating experience with electro-hydraulic control (EHC) and instrument air (IA) system piping

Experimental Results of A1.2 Test for OECD-ATLAS Project

Energy Technology Data Exchange (ETDEWEB)

Kang, Kyoung-Ho; Bae, Byoung-Uhn; Park, Yu-Sun; Kim, Jong-Rok; Choi, Nam-Hyun; Choi, Ki-Yong [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2015-10-15

In order to meet the international interests in the multiple high-risk design extension conditions (DECs) raised after the Fukushima accident, KAERI (Korea Atomic Energy Research Institute) is operating an OECD/NEA project (hereafter, OECD-ATLAS project) by utilizing a thermal-hydraulic integral effect test facility, ATLAS (Advanced Thermal-hydraulic Test Loop for Accident Simulation). As for a prolonged SBO transient of the OECD-ATLAS project, two tests, named A1.1 and A1.2, were determined to be performed. In particular, passive safety systems are considered as the most promising alternatives to reinforce the safety and reliability of an ultimate heat removal system without any operator actions in the SBO transients. As one of the new safety improvement concepts to mitigate an SBO accident efficiently, a cooling and operational performance of the passive auxiliary feedwater system (PAFS) is investigated in the framework of the OECD-ATLAS project to produce clearer knowledge of the actual phenomena and to provide the best guidelines for accident management. As the second test of the OECD-ATLAS project, the A1.2 test was conducted to simulate a prolonged SBO with asymmetric secondary cooling through the supply of passive auxiliary feedwater only to SG-2. When the collapsed water level of steam generator reached a wide range of 25%, PAFS was actuated. PAFS played a key role in cooling down the primary system by the heat transfer and the natural circulation. With the actuation of PAFS, the fluid temperatures at the core inlet and outlet started to decrease without any excursion of the maximum heater surface temperature in the core. This integral effect test data of A1.2 test can be used to evaluate the prediction capability of existing safety analysis codes and identify any code deficiency for an SBO simulation with an operation of a passive system such as PAFS.

Test Specification of A1-1 Test for OECD-ATLAS Project

International Nuclear Information System (INIS)

Kang, Kyoung-Ho; Moon, Sang-Ki; Lee, Seung-Wook; Choi, Ki-Yong; Song, Chul-Hwa

2014-01-01

In the OECD-ATLAS project, design extension conditions (DECs) such as a station blackout (SBO) and a total loss of feed water (TLOFW) will be experimentally investigated to meet the international interests in the multiple high-risk DECs raised after the Fukushima accident. The proposed test matrix for the OECD-ATLAS project is summarized in Table 1.. In this study, detailed specification of the first test named as A1-1 in the OECD-ATLAS project was described. The target scenario of the A1-1 test is a prolonged SBO with delayed supply of turbine-driven auxiliary feedwater to only SG number 2 (SG-2). A SBO is one of the most important DECs in that without any proper operator actions, a total loss of heat sink leads to core uncover, to core damage, and ultimately a core melt-down scenario under high pressure. Due to this safety importance, a SBO is considered to be a base test item of the OECD-ATLAS project. A detailed specification of the first test named as A1-1 in the OECD-ATLAS project was described. The target scenario of the A1-1 test is a prolonged SBO with delayed supply of turbine-driven auxiliary feedwater to only SG-2 in order to consider an accident mitigation measure. The pre-test analysis using MARS code was performed with an aim of setting up the detailed test procedures for A1-1 test and also gaining the physical insights for a prolonged SBO transient. In the A1-1 test, a prolonged SBO transient will be simulated with two temporal phases: Phase (I) for conservative SBO transient without supply of turbine-driven auxiliary feedwater and Phase (II) for asymmetric cooling via single trained supply of turbine-driven auxiliary feedwater

Benchmarking Using Basic DBMS Operations

Science.gov (United States)

Crolotte, Alain; Ghazal, Ahmad

The TPC-H benchmark proved to be successful in the decision support area. Many commercial database vendors and their related hardware vendors used these benchmarks to show the superiority and competitive edge of their products. However, over time, the TPC-H became less representative of industry trends as vendors keep tuning their database to this benchmark-specific workload. In this paper, we present XMarq, a simple benchmark framework that can be used to compare various software/hardware combinations. Our benchmark model is currently composed of 25 queries that measure the performance of basic operations such as scans, aggregations, joins and index access. This benchmark model is based on the TPC-H data model due to its maturity and well-understood data generation capability. We also propose metrics to evaluate single-system performance and compare two systems. Finally we illustrate the effectiveness of this model by showing experimental results comparing two systems under different conditions.

High Energy Physics (HEP) benchmark program

International Nuclear Information System (INIS)

Yasu, Yoshiji; Ichii, Shingo; Yashiro, Shigeo; Hirayama, Hideo; Kokufuda, Akihiro; Suzuki, Eishin.

1993-01-01

High Energy Physics (HEP) benchmark programs are indispensable tools to select suitable computer for HEP application system. Industry standard benchmark programs can not be used for this kind of particular selection. The CERN and the SSC benchmark suite are famous HEP benchmark programs for this purpose. The CERN suite includes event reconstruction and event generator programs, while the SSC one includes event generators. In this paper, we found that the results from these two suites are not consistent. And, the result from the industry benchmark does not agree with either of these two. Besides, we describe comparison of benchmark results using EGS4 Monte Carlo simulation program with ones from two HEP benchmark suites. Then, we found that the result from EGS4 in not consistent with the two ones. The industry standard of SPECmark values on various computer systems are not consistent with the EGS4 results either. Because of these inconsistencies, we point out the necessity of a standardization of HEP benchmark suites. Also, EGS4 benchmark suite should be developed for users of applications such as medical science, nuclear power plant, nuclear physics and high energy physics. (author)

Benchmarking Tool Kit.

Science.gov (United States)

Canadian Health Libraries Association.

Nine Canadian health libraries participated in a pilot test of the Benchmarking Tool Kit between January and April, 1998. Although the Tool Kit was designed specifically for health libraries, the content and approach are useful to other types of libraries as well. Used to its full potential, benchmarking can provide a common measuring stick to…

Drivers for renewable energy: A comparison among OECD countries

International Nuclear Information System (INIS)

Gan, Jianbang; Smith, C.T.

2011-01-01

The difference in the shares of renewable energy in total primary energy supply among OECD countries is immense. We attempt to identify some key factors that may have driven this difference for renewable energy in general and bioenergy in particular. We found that besides country-specific factors, gross national product (GDP) and renewable energy and bioenergy market deployment policies have significant and positive impacts on the per capita supply of both renewable energy and bioenergy in OECD countries. R and D expenditures, energy prices, CO 2 emissions, and other energy policies are statistically insignificant in terms of their impact on renewable energy and bioenergy supply. However, this does not necessarily mean that they are not potential drivers for renewable energy and bioenergy, but rather suggests that their magnitudes have not been big enough to significantly influence energy supply based on the historical data from 1994 to 2003. These findings lead to useful policy implications for countries attempting to promote renewable energy and bioenergy development. -- Highlights: ► We identify the drivers of renewable energy development in OECD countries. ► Common drivers include GDP per capita and market deployment policies. ► Country-specific drivers reveal different pathways for bioenergy development.

OECD Transfer Pricing Guidelines - Implementation by Norwegian Tax Administration

Energy Technology Data Exchange (ETDEWEB)

Sollund, Stig

1998-07-01

Presentation. The growth of multinational enterprises and integration of world markets across national borders has increased the importance of this issue: How should corporate tax systems at the national level be applied to the profits of companies engaging in the vast number of cross border transactions? The challenges and implications of the issue are tremendous both to the national governments and to the enterprises. The OECD countries have responded to these challenges by declaring that each enterprise within a multinational group of companies shall be treated as a separate entity. In order to apply the separate entity approach to intra group transactions, individual group members must be taxed on the basis that they act at arm's length with each other. The arm's length principle is more easily understood in theory than applied in practice. In some countries, therefore, the authorities have explored other methods than the traditional ones, as described in the 1979 Transfer Pricing Report of the OECD. A confirmed consensus between the governments was reached in the form of the revised 1995 guidelines. The Norwegian Ministry of Finance has given its full support to the efforts of defending the separate entity approach and the arm's length principle in the OECD committees.

Qualification of the core model DYN3D coupled with the code ATHLET as an advanced tool for the accident analysis of VVER type reactors. Pt. 2. Final report

International Nuclear Information System (INIS)

Grundmann, U.; Kliem, S.; Rohde, U.

2002-10-01

Benchmark calculations for the validation of the coupled neutron kinetics/thermohydraulic code complex DYN3D-ATHLET are described. Two benchmark problems concerning hypothetical accident scenarios with leaks in the steam system for a VVER-440 type reactor and the TMI-1 PWR have been solved. The first benchmark task has been defined by FZR in the frame of the international association 'Atomic Energy Research' (AER), the second exercise has been organized under the auspices of the OECD. While in the first benchmark the break of the main steam collector in the sub-critical hot zero power state of the reactor was considered, the break of one of the two main steam lines at full reactor power was assumed in the OECD benchmark. Therefore, in this exercise the mixing of the coolant from the intact and the defect loops had to be considered, while in the AER benchmark the steam collector break causes a homogeneous overcooling of the primary circuit. In the AER benchmark, each participant had to use its own macroscopic cross section libraries. In the OECD benchmark, the cross sections were given in the benchmark definition. The main task of both benchmark problems was to analyse the re-criticality of the scrammed reactor due to the overcooling. For both benchmark problems, a good agreement of the DYN3D-ATHLET solution with the results of other codes was achieved. Differences in the time of re-criticality and the height of the power peak between various solutions of the AER benchmark can be explained by the use of different cross section data. Significant differences in the thermohydraulic parameters (coolant temperature, pressure) occurred only at the late stage of the transient during the emergency injection of highly borated water. In the OECD benchmark, a broader scattering of the thermohydraulic results can be observed, while a good agreement between the various 3D reactor core calculations with given thermohydraulic boundary conditions was achieved. Reasons for the

A Global Vision over Benchmarking Process: Benchmarking Based Enterprises

OpenAIRE

Sitnikov, Catalina; Giurca Vasilescu, Laura

2008-01-01

Benchmarking uses the knowledge and the experience of others to improve the enterprise. Starting from the analysis of the performance and underlying the strengths and weaknesses of the enterprise it should be assessed what must be done in order to improve its activity. Using benchmarking techniques, an enterprise looks at how processes in the value chain are performed. The approach based on the vision “from the whole towards the parts” (a fragmented image of the enterprise’s value chain) redu...

Argonne Code Center: Benchmark problem book.

Energy Technology Data Exchange (ETDEWEB)

None, None

1977-06-01

This book is an outgrowth of activities of the Computational Benchmark Problems Committee of the Mathematics and Computation Division of the American Nuclear Society. This is the second supplement of the original benchmark book which was first published in February, 1968 and contained computational benchmark problems in four different areas. Supplement No. 1, which was published in December, 1972, contained corrections to the original benchmark book plus additional problems in three new areas. The current supplement. Supplement No. 2, contains problems in eight additional new areas. The objectives of computational benchmark work and the procedures used by the committee in pursuing the objectives are outlined in the original edition of the benchmark book (ANL-7416, February, 1968). The members of the committee who have made contributions to Supplement No. 2 are listed below followed by the contributors to the earlier editions of the benchmark book.

An Internal Audit Perspective on Differences between European Corporate Governance Codes and OECD Principles

Directory of Open Access Journals (Sweden)

Raluca Ivan

2015-12-01

Full Text Available The main purpose of this research is to realize an analysis from an internal audit perspective of European Corporate Governance Codes, in regards with Organization for Economic Cooperation and Development – OECD Principles of Corporate Governance. The research methodology used a classification of countries by legal regime, trying to obtain a global view over the differences between the European corporate governance codes and the OECD Principles provisions, from internal audit’s perspective. The findings suggest that the specificities of internal audit function when studying the differences between European Corporate Governance Codes and OECD Principles lead to different treatment.

School-to-Work Transitions in the OECD: Do Education Systems Make a Difference?

Science.gov (United States)

Karmel, Tom

2017-01-01

High unemployment among the young is a concern in many OECD countries. A key issue for policy makers is whether the education system has a role to play in assisting the transition from education to work or whether economic issues dominate. This paper uses OECD country-level data to see whether the structure of countries' education systems,…

OECD Work on Technology and Education: Innovative Learning Environments as an Integrating Framework

Science.gov (United States)

Istance, David; Kools, Marco

2013-01-01

This article presents in summary a selection of the work conducted by OECD in the field of technology and education, which has been an on-going focus of OECD work since the 1980s. Recently, much of this has been under the heading of "New Millennium Learners", but it has also included the widening of student achievement surveys towards…

Benchmarks for GADRAS performance validation

International Nuclear Information System (INIS)

Mattingly, John K.; Mitchell, Dean James; Rhykerd, Charles L. Jr.

2009-01-01

The performance of the Gamma Detector Response and Analysis Software (GADRAS) was validated by comparing GADRAS model results to experimental measurements for a series of benchmark sources. Sources for the benchmark include a plutonium metal sphere, bare and shielded in polyethylene, plutonium oxide in cans, a highly enriched uranium sphere, bare and shielded in polyethylene, a depleted uranium shell and spheres, and a natural uranium sphere. The benchmark experimental data were previously acquired and consist of careful collection of background and calibration source spectra along with the source spectra. The calibration data were fit with GADRAS to determine response functions for the detector in each experiment. A one-dimensional model (pie chart) was constructed for each source based on the dimensions of the benchmark source. The GADRAS code made a forward calculation from each model to predict the radiation spectrum for the detector used in the benchmark experiment. The comparisons between the GADRAS calculation and the experimental measurements are excellent, validating that GADRAS can correctly predict the radiation spectra for these well-defined benchmark sources.

Benchmarking in Czech Higher Education

Directory of Open Access Journals (Sweden)

Plaček Michal

2015-12-01

Full Text Available The first part of this article surveys the current experience with the use of benchmarking at Czech universities specializing in economics and management. The results indicate that collaborative benchmarking is not used on this level today, but most actors show some interest in its introduction. The expression of the need for it and the importance of benchmarking as a very suitable performance-management tool in less developed countries are the impetus for the second part of our article. Based on an analysis of the current situation and existing needs in the Czech Republic, as well as on a comparison with international experience, recommendations for public policy are made, which lie in the design of a model of a collaborative benchmarking for Czech economics and management in higher-education programs. Because the fully complex model cannot be implemented immediately – which is also confirmed by structured interviews with academics who have practical experience with benchmarking –, the final model is designed as a multi-stage model. This approach helps eliminate major barriers to the implementation of benchmarking.

The Effect of Corruption on Government Expenditure Allocation in OECD Countries

Directory of Open Access Journals (Sweden)

Ondřej Jajkowicz

2015-01-01

Full Text Available This paper empirically examines the effect of corruption on the allocation of government expenditures by function. Equations using pooled panel dataset for 21 OECD countries between 1998 and 2011 were tested, and the findings show that government expenditure on defense and general public services increase, while government expenditures on education, health, recreation, culture and religion decline with higher levels of corruption. This paper presents new results and new evidence on the link between corruption and allocation of government expenditures in OECD countries.

Convergence and determinants of health expenditures in OECD countries.

Science.gov (United States)

Nghiem, Son Hong; Connelly, Luke Brian

2017-08-17

This study examines the trend and determinants of health expenditures in OECD countries over the 1975-2004 period. Based on recent developments in the economic growth literature we propose and test the hypothesis that health care expenditures in countries of similar economic development level may converge. We hypothesise that the main drivers for growth in health care costs include: aging population, technological progress and health insurance. The results reveal no evidence that health expenditures among OECD countries converge. Nevertheless, there is evidence of convergence among three sub-groups of countries. We found that the main driver of health expenditure is technological progress. Our results also suggest that health care is a (national) necessity, not a luxury good as some other studies in this field have found.

ANN-Benchmarks: A Benchmarking Tool for Approximate Nearest Neighbor Algorithms

DEFF Research Database (Denmark)

Aumüller, Martin; Bernhardsson, Erik; Faithfull, Alexander

2017-01-01

This paper describes ANN-Benchmarks, a tool for evaluating the performance of in-memory approximate nearest neighbor algorithms. It provides a standard interface for measuring the performance and quality achieved by nearest neighbor algorithms on different standard data sets. It supports several...... visualise these as images, Open image in new window plots, and websites with interactive plots. ANN-Benchmarks aims to provide a constantly updated overview of the current state of the art of k-NN algorithms. In the short term, this overview allows users to choose the correct k-NN algorithm and parameters...... for their similarity search task; in the longer term, algorithm designers will be able to use this overview to test and refine automatic parameter tuning. The paper gives an overview of the system, evaluates the results of the benchmark, and points out directions for future work. Interestingly, very different...

OECD Reviews of School Resources: Austria 2016

Science.gov (United States)

Nusche, Deborah; Radinger, Thomas; Busemeyer, Marius R.; Theisens, Henno

2016-01-01

This report for Austria forms part of the Organisation for Economic Cooperation and Development (OECD) Review of Policies to Improve the Effectiveness of Resource Use in Schools. The purpose of the review is to explore how school resources can be governed, distributed, utilised and managed to improve the quality, equity and efficiency of school…

Benchmarking Swiss electricity grids

International Nuclear Information System (INIS)

Walti, N.O.; Weber, Ch.

2001-01-01

This extensive article describes a pilot benchmarking project initiated by the Swiss Association of Electricity Enterprises that assessed 37 Swiss utilities. The data collected from these utilities on a voluntary basis included data on technical infrastructure, investments and operating costs. These various factors are listed and discussed in detail. The assessment methods and rating mechanisms that provided the benchmarks are discussed and the results of the pilot study are presented that are to form the basis of benchmarking procedures for the grid regulation authorities under the planned Switzerland's electricity market law. Examples of the practical use of the benchmarking methods are given and cost-efficiency questions still open in the area of investment and operating costs are listed. Prefaces by the Swiss Association of Electricity Enterprises and the Swiss Federal Office of Energy complete the article

Local lymph node assay: how testing laboratories apply OECD TG 429 for REACH purposes.

Science.gov (United States)

Rovida, Costanza

2011-01-01

The Local Lymph Node Assay (LLNA) is the official method for assessing the allergic contact dermatitis potential of chemicals for the purposes of REACH regulation. The LLNA went through a validation process that allowed the delineation of a robust protocol for performing new tests. The OECD accepted this method in 2002 and published OECD TG 429. The European Chemical Agency (ECHA) recently published data that were submitted in the registration dossiers of chemicals. This database was analysed to determine how testing laboratories apply OECD TG 429. This analysis comes after a detailed analysis of four full study reports that were also prepared for REACH purposes. Although the majority of the tests are fully compliant with OECD TG 429, some showed major deviations, and a number of others used more animals than necessary. This suggests that in vivo tests need to be planned more carefully and consciously to obtain meaningful results with the minimum animal number necessary.

Coupled simulation of steam line break accident

International Nuclear Information System (INIS)

Royer, E.; Raimond, E.; Caruge, D.

2000-01-01

The steam line break is a PWR type reactor design accident, which concerns coupled physical phenomena. To control these problems simulation are needed to define and validate the operating procedures. The benchmark OECD PWR MSLB (Main Steam Line Break) has been proposed by the OECD to validate the feasibility and the contribution of the multi-dimensional tools in the simulation of the core transients. First the benchmark OECD PWR MSLB is presented. Then the analysis of the three exercises (system with pinpoint kinetic, three-dimensional core and whole system with three-dimensional core) are discussed. (A.L.B.)

Comments on OECD discussion draft on revisions to Chapter I of the Transfer Pricing Guidelines

NARCIS (Netherlands)

Burgers, Irene; van Herwaarden, A.J.

2015-01-01

These comments provide recommendations for improved transfer pricing guidance and were submitted in response to an invitation by the OECD to interested parties to submit written comments on a discussion draft regarding the OECD Transfer Pricing Guidelines

Taxation, business environment and FDI location in OECD countries

Czech Academy of Sciences Publication Activity Database

Hájková, Dana; Nicoletti, G.; Vartia, L.; Yoo, K.-Y.

Č. 502 (2006), s. 1-33 Institutional research plan: CEZ:AV0Z70850503 Keywords : taxation * business environment * foreign direct investment Subject RIV: AH - Economics http://www.oecd.org/eco/working_papers

Digital Broadband Content: Digital Content Strategies and policies. OECD Digital Economy Papers, No. 119

Science.gov (United States)

OECD Publishing (NJ1), 2006

2006-01-01

The development of digital content raises new issues as rapid technological developments challenge existing business models and government policies. This OECD study identifies and discusses six groups of business and public policy issues and illustrates these with existing and potential OECD Digital Content Strategies and Policies: (1) Innovation…

Improving Education Achievement and Attainment in Luxembourg. OECD Economics Department Working Papers, No. 508

Science.gov (United States)

Carey, David; Ernst, Ekkehard

2006-01-01

Improving education achievement in Luxembourg is a priority for strengthening productivity growth and enhancing residents' employment prospects in the private sector, where employers mainly hire cross-border workers. Student achievement in Luxembourg is below the OECD average according to the 2003 OECD PISA study, with the performance gap between…

Electricity deregulation in OECD (Organization for Economic Cooperation and Development) countries

Energy Technology Data Exchange (ETDEWEB)

Al-Sunaidy, A.; Green, R. [Business School, University of Hull, Hull HU6 7RX (United Kingdom)

2006-05-15

This paper discusses the spread of electricity deregulation in OECD countries since the early 1990s. England, Wales and Norway were the pioneers, but almost all OECD countries have now introduced some degree of liberalisation, and several have free entry to generation while allowing all electricity consumers to choose where they buy their power. The paper discusses some of the issues raised by competition in generation and in retailing (or supply), and the need to have appropriate regulation for the transmission and distribution systems, which will continue to be monopolies. (author)

2001-2002 carbon dioxide emissions in OECD

International Nuclear Information System (INIS)

2004-11-01

This document provides carbon dioxide emissions data, from energy uses and production, from 2001 to 2002 in the OECD. It concerns the climate corrected CO 2 emissions in France, the non corrected CO 2 emissions (M tons), the emissions intensity / the Gross Domestic Product and the emissions intensity / the population (tons per inhabitant). (A.L.B.)

Benchmarking af kommunernes sagsbehandling

DEFF Research Database (Denmark)

Amilon, Anna

Fra 2007 skal Ankestyrelsen gennemføre benchmarking af kommuernes sagsbehandlingskvalitet. Formålet med benchmarkingen er at udvikle praksisundersøgelsernes design med henblik på en bedre opfølgning og at forbedre kommunernes sagsbehandling. Dette arbejdspapir diskuterer metoder for benchmarking...

OECD-IAEA Paks Fuel Project. Final Report

International Nuclear Information System (INIS)

2010-05-01

It is important for nuclear power plant designers, operators and regulators to effectively use lessons learned from events occurring at nuclear power plants since, in general, it is impossible to reproduce the event using experimental facilities. In particular, evaluation of the event using accident analysis codes is expected to contribute to improving understanding of phenomena during the events and to facilitate the validation of computer codes through simulation analyses. The information presented in this publication will be of use in future revisions of safety guides on accident analysis. During a fuel crud removal operation on the Paks-2 unit of the Paks nuclear power plant, Hungary on 10 April 2003, several fuel assemblies were severely damaged. The assemblies were being cleaned in a special tank under deep water in a service pit connected to the spent fuel storage pool. The first sign of fuel failures was the detection of some fission gases released from the cleaning tank. Later, visual inspection revealed that most of the 30 fuel assemblies suffered heavy oxidation and fragmentation. The first evaluation of the event showed that the severe fuel damage had been caused by inadequate cooling. The Paks-2 event was discussed in various committees of the OECD Nuclear Energy Agency (OECD/NEA) and of the International Atomic Energy Agency (IAEA). Recommendations were made to undertake actions to improve the understanding of the incident sequence and of the consequence this had on the fuel. It was considered that the Paks-2 event may constitute a useful case for a comparative exercise on safety codes, in particular for models devised to predict fuel damage and potential releases under abnormal cooling conditions and the analyses of the Paks-2 event may provide information which is relevant for in-reactor and spent fuel storage safety evaluations. The OECD-IAEA Paks Fuel Project was established in 2005 as a joint project between the IAEA and the OECD/NEA. The IAEA

MFTF TOTAL benchmark

International Nuclear Information System (INIS)

Choy, J.H.

1979-06-01

A benchmark of the TOTAL data base management system as applied to the Mirror Fusion Test Facility (MFTF) data base was implemented and run in February and March of 1979. The benchmark was run on an Interdata 8/32 and involved the following tasks: (1) data base design, (2) data base generation, (3) data base load, and (4) develop and implement programs to simulate MFTF usage of the data base

The Drill Down Benchmark

NARCIS (Netherlands)

P.A. Boncz (Peter); T. Rühl (Tim); F. Kwakkel

1998-01-01

textabstractData Mining places specific requirements on DBMS query performance that cannot be evaluated satisfactorily using existing OLAP benchmarks. The DD Benchmark - defined here - provides a practical case and yardstick to explore how well a DBMS is able to support Data Mining applications. It

Benchmarking and Learning in Public Healthcare

DEFF Research Database (Denmark)

Buckmaster, Natalie; Mouritsen, Jan

2017-01-01

This research investigates the effects of learning-oriented benchmarking in public healthcare settings. Benchmarking is a widely adopted yet little explored accounting practice that is part of the paradigm of New Public Management. Extant studies are directed towards mandated coercive benchmarking...

Numerical and computational aspects of the coupled three-dimensional core/ plant simulations: organization for economic cooperation and development/ U.S. nuclear regulatory commission pressurized water reactor main-steam-line-break benchmark-II. 2. TRAB-3D/SMABRE Calculation of the OECD/ NRC PWR MSLB Benchmark

International Nuclear Information System (INIS)

Daavittila, A.; Haemaelaeinen, A.; Kyrki-Rajamaki, R.

2001-01-01

All three exercises of the OECD/NRC Pressurized Water Reactor (PWR) Main-Steam-Line-Break (MSLB) Benchmark were calculated at VTT Energy. The SMABRE thermal-hydraulics code was used for the first exercise, the plant simulation with point-kinetics neutronics. The second exercise was calculated with the TRAB-3D three-dimensional reactor dynamics code. The third exercise was calculated with the combination TRAB-3D/SMABRE. Both codes have been developed at VTT Energy. The results of all the exercises agree reasonably well with those of the other participants; thus, instead of reporting the results, this paper concentrates on describing the computational aspects of the calculation with the foregoing codes and on some observations of the sensitivity of the results. In the TRAB-3D neutron kinetics, the two-group diffusion equations are solved in homogenized fuel assembly geometry with an efficient two-level nodal method. The point of the two-level iteration scheme is that only one unknown variable per node, the average neutron flux, is calculated during the inner iteration. The nodal flux shapes and cross sections are recalculated only once in the outer iteration loop. The TRAB-3D core model includes also parallel one-dimensional channel hydraulics with detailed fuel models. Advanced implicit time discretization methods are used in all submodels. SMABRE is a fast-running five-equation model completed by a drift-flux model, with a time discretization based on a non-iterative semi-implicit algorithm. For the third exercise of the benchmark, the TMI-1 models of TRAB-3D and SMABRE were coupled. This was the first time these codes were coupled together. However, similar coupling of the HEXTRAN and SMABRE codes has been shown to be stable and efficient, when used in safety analyses of Finnish and foreign VVER-type reactors. The coupling used between the two codes is called a parallel coupling. SMABRE solves the thermal hydraulics both in the cooling circuit and in the core

Benchmarking & European Sustainable Transport Policies

DEFF Research Database (Denmark)

Gudmundsson, H.

2003-01-01

, Benchmarking is one of the management tools that have recently been introduced in the transport sector. It is rapidly being applied to a wide range of transport operations, services and policies. This paper is a contribution to the discussion of the role of benchmarking in the future efforts to...... contribution to the discussions within the Eusponsored BEST Thematic Network (Benchmarking European Sustainable Transport) which ran from 2000 to 2003....

Benchmarking – A tool for judgment or improvement?

DEFF Research Database (Denmark)

Rasmussen, Grane Mikael Gregaard

2010-01-01

perceptions of benchmarking will be presented; public benchmarking and best practice benchmarking. These two types of benchmarking are used to characterize and discuss the Danish benchmarking system and to enhance which effects, possibilities and challenges that follow in the wake of using this kind......Change in construction is high on the agenda for the Danish government and a comprehensive effort is done in improving quality and efficiency. This has led to an initiated governmental effort in bringing benchmarking into the Danish construction sector. This paper is an appraisal of benchmarking...... as it is presently carried out in the Danish construction sector. Many different perceptions of benchmarking and the nature of the construction sector, lead to an uncertainty in how to perceive and use benchmarking, hence, generating an uncertainty in understanding the effects of benchmarking. This paper addresses...

Storage-Intensive Supercomputing Benchmark Study

Energy Technology Data Exchange (ETDEWEB)

Cohen, J; Dossa, D; Gokhale, M; Hysom, D; May, J; Pearce, R; Yoo, A

2007-10-30

Critical data science applications requiring frequent access to storage perform poorly on today's computing architectures. This project addresses efficient computation of data-intensive problems in national security and basic science by exploring, advancing, and applying a new form of computing called storage-intensive supercomputing (SISC). Our goal is to enable applications that simply cannot run on current systems, and, for a broad range of data-intensive problems, to deliver an order of magnitude improvement in price/performance over today's data-intensive architectures. This technical report documents much of the work done under LDRD 07-ERD-063 Storage Intensive Supercomputing during the period 05/07-09/07. The following chapters describe: (1) a new file I/O monitoring tool iotrace developed to capture the dynamic I/O profiles of Linux processes; (2) an out-of-core graph benchmark for level-set expansion of scale-free graphs; (3) an entity extraction benchmark consisting of a pipeline of eight components; and (4) an image resampling benchmark drawn from the SWarp program in the LSST data processing pipeline. The performance of the graph and entity extraction benchmarks was measured in three different scenarios: data sets residing on the NFS file server and accessed over the network; data sets stored on local disk; and data sets stored on the Fusion I/O parallel NAND Flash array. The image resampling benchmark compared performance of software-only to GPU-accelerated. In addition to the work reported here, an additional text processing application was developed that used an FPGA to accelerate n-gram profiling for language classification. The n-gram application will be presented at SC07 at the High Performance Reconfigurable Computing Technologies and Applications Workshop. The graph and entity extraction benchmarks were run on a Supermicro server housing the NAND Flash 40GB parallel disk array, the Fusion-io. The Fusion system specs are as follows

BONFIRE: benchmarking computers and computer networks

OpenAIRE

Bouckaert, Stefan; Vanhie-Van Gerwen, Jono; Moerman, Ingrid; Phillips, Stephen; Wilander, Jerker

2011-01-01

The benchmarking concept is not new in the field of computing or computer networking. With “benchmarking tools”, one usually refers to a program or set of programs, used to evaluate the performance of a solution under certain reference conditions, relative to the performance of another solution. Since the 1970s, benchmarking techniques have been used to measure the performance of computers and computer networks. Benchmarking of applications and virtual machines in an Infrastructure-as-a-Servi...

The Isprs Benchmark on Indoor Modelling

Science.gov (United States)

Khoshelham, K.; Díaz Vilariño, L.; Peter, M.; Kang, Z.; Acharya, D.

2017-09-01

Automated generation of 3D indoor models from point cloud data has been a topic of intensive research in recent years. While results on various datasets have been reported in literature, a comparison of the performance of different methods has not been possible due to the lack of benchmark datasets and a common evaluation framework. The ISPRS benchmark on indoor modelling aims to address this issue by providing a public benchmark dataset and an evaluation framework for performance comparison of indoor modelling methods. In this paper, we present the benchmark dataset comprising several point clouds of indoor environments captured by different sensors. We also discuss the evaluation and comparison of indoor modelling methods based on manually created reference models and appropriate quality evaluation criteria. The benchmark dataset is available for download at: html"target="_blank">http://www2.isprs.org/commissions/comm4/wg5/benchmark-on-indoor-modelling.html.

Benchmarking the energy efficiency of commercial buildings

International Nuclear Information System (INIS)

Chung, William; Hui, Y.V.; Lam, Y. Miu

2006-01-01

Benchmarking energy-efficiency is an important tool to promote the efficient use of energy in commercial buildings. Benchmarking models are mostly constructed in a simple benchmark table (percentile table) of energy use, which is normalized with floor area and temperature. This paper describes a benchmarking process for energy efficiency by means of multiple regression analysis, where the relationship between energy-use intensities (EUIs) and the explanatory factors (e.g., operating hours) is developed. Using the resulting regression model, these EUIs are then normalized by removing the effect of deviance in the significant explanatory factors. The empirical cumulative distribution of the normalized EUI gives a benchmark table (or percentile table of EUI) for benchmarking an observed EUI. The advantage of this approach is that the benchmark table represents a normalized distribution of EUI, taking into account all the significant explanatory factors that affect energy consumption. An application to supermarkets is presented to illustrate the development and the use of the benchmarking method

Numisheet2005 Benchmark Analysis on Forming of an Automotive Underbody Cross Member: Benchmark 2

International Nuclear Information System (INIS)

Buranathiti, Thaweepat; Cao Jian

2005-01-01

This report presents an international cooperation benchmark effort focusing on simulations of a sheet metal stamping process. A forming process of an automotive underbody cross member using steel and aluminum blanks is used as a benchmark. Simulation predictions from each submission are analyzed via comparison with the experimental results. A brief summary of various models submitted for this benchmark study is discussed. Prediction accuracy of each parameter of interest is discussed through the evaluation of cumulative errors from each submission

SKaMPI: A Comprehensive Benchmark for Public Benchmarking of MPI

Directory of Open Access Journals (Sweden)

Ralf Reussner

2002-01-01

Full Text Available The main objective of the MPI communication library is to enable portable parallel programming with high performance within the message-passing paradigm. Since the MPI standard has no associated performance model, and makes no performance guarantees, comprehensive, detailed and accurate performance figures for different hardware platforms and MPI implementations are important for the application programmer, both for understanding and possibly improving the behavior of a given program on a given platform, as well as for assuring a degree of predictable behavior when switching to another hardware platform and/or MPI implementation. We term this latter goal performance portability, and address the problem of attaining performance portability by benchmarking. We describe the SKaMPI benchmark which covers a large fraction of MPI, and incorporates well-accepted mechanisms for ensuring accuracy and reliability. SKaMPI is distinguished among other MPI benchmarks by an effort to maintain a public performance database with performance data from different hardware platforms and MPI implementations.

PERAN OECD DALAM MEMINIMALKAN UPAYA TAX AGRESIVENESS PADA PERUSAHAAN MULTINATIONALITY

Directory of Open Access Journals (Sweden)

Hanindia Hajjar Damayanti

2017-04-01

Full Text Available Abstract: OECD's Role in Minimizing Tax Aggressiveness Efforts at Multinationality Companies. This paper aims to prove the relation between multinationality transaction of tax heaven countries and the tax investigation toward the tax aggressiveness. This research is done by quantitative approach upon the companies registered in BEI for 2010-2014 periods. The findings denote the tax heaven countries have no effort to conduct the tax aggressiveness on which the multinationality negatively has no effect since the occurrence in the OECD Transfer Pricing Guidelines as the guideline for both the taxing authority and the multinational companies in accomplishing the transfer pricing matter. In contrary, the investigation does not influence the tax aggressiveness.

Selection or network effects? Migration flows into 27 OECD countries, 1990-2000

DEFF Research Database (Denmark)

Pedersen, Peder J.; Pytlikova, Mariola; Smith, Nina

Recent migration patterns show growing migration pressure and changing composition of immigrants in many Western countries. During the latest decade, an increasing proportion of the OECD immigrants have been from poor countries, where the educational level of the population is low. The migration ...... evidence that selection effects have had a major influence on the observed migration patterns until now. This may partly be explained by restrictive migration policies in many OECD countries which may have dampened the potential selection effects....

Selection or Network Effects? Migration Flows into 27 OECD Countries, 1990-2000

DEFF Research Database (Denmark)

Pedersen, P.J.; Pytlikova, Mariola; Smith, Nina

Recent migration patterns show growing migration pressure and changing composition of immigrants in many Western countries. During the latest decade, an increasing proportion of the OECD immigrants have been from poor countries, where the educational level of the population is low. The migration ...... evidence that selection effects have had a major influence on the observed migration patterns until now. This may partly be explained by restrictive migration policies in many OECD countries which may have dampened the potential selection effects....

OECD/NEA Study on the Economics of Long Term Operation of NPP

International Nuclear Information System (INIS)

Lokhov, Alexey; Cameron, Ron

2012-01-01

The OECD Nuclear Energy Agency (NEA) established the Ad Hoc expert group on the Economics of Long-term Operation (LTO) of Nuclear Power Plants. The primary aim of this group is to collect and analyse technical and economic data on the upgrade and lifetime extension experience in OECD countries, and to assess the likely applications for future extensions. This paper describes the key elements of the methodology of economic assessment of LTO and initial findings for selected NEA member countries. (author)

The Chemistry of iodine in reactor safety: summary and conclusions: OECD Workshop

International Nuclear Information System (INIS)

1996-01-01

About seventy experts from fourteen OECD member countries attended this Fourth OECD Workshop on the chemistry of iodine in reactor safety, as well as experts from Latvia and the Commission of the European Communities. Thirty four papers were presented, in five sessions: national and international programmes (integral and intermediate-scale experiments), experimental homogeneous phase chemistry, surface processes, thermodynamic and kinetic studies, safety applications. A final session is devoted to a general discussion on remaining research studies relevant to reactor safety

OECD/CSNI Workshop on Best Estimate Methods and Uncertainty Evaluations - Workshop Proceedings

International Nuclear Information System (INIS)

2013-01-01

Best-Estimate Methods plus Uncertainty Evaluation are gaining increased interest in the licensing process. On the other hand, lessons learnt from the BEMUSE (NEA/CSNI/R(2011)3) and SM2A (NEA/CSNI/R(2011)3) benchmarks, progress of UAM benchmark, and answers to the WGAMA questionnaire on the Use of Best-Estimate Methodologies show that improvements of the present methods are necessary and new applications appear. The objective of this workshop is to provide a forum for a wide range of experts to exchange information in the area of best estimate analysis and uncertainty evaluation methods and address issues drawn-up from BEMUSE, UAM and SM2A activities. Both, improvement of existing methods and recent new developments are included. As a result of the workshop development, a set of recommendations, including lines for future activities were proposed. The organisation of the Workshop was divided into three parts: Opening session including key notes from OECD and IAEA representatives, Technical sessions, and a Wrap-up session. All sessions included a debate with participation from the audience constituted by 71 attendees. The workshop consisted of four technical sessions: a) Development achievements of BEPU methods and State of the Art: The objective of this session was to present the different approaches to deal with Best Estimate codes and uncertainties evaluations. A total of six papers were presented. One initial paper summarized the existing methods; the following open papers were focused on specific methods stressing their bases, peculiarities and advantages. As a result of the session a picture of the current State of the Art was obtained. b) International comparative activities: This session reviewed the set of international activities around the subject of BEPU methods benchmarking and development. From each of the activities a description of the objectives, development, main results, conclusions and recommendations (in case it is finalized) was presented. This

Entropy-based benchmarking methods

NARCIS (Netherlands)

Temurshoev, Umed

2012-01-01

We argue that benchmarking sign-volatile series should be based on the principle of movement and sign preservation, which states that a bench-marked series should reproduce the movement and signs in the original series. We show that the widely used variants of Denton (1971) method and the growth

Power reactor pressure vessel benchmarks

International Nuclear Information System (INIS)

Rahn, F.J.

1978-01-01

A review is given of the current status of experimental and calculational benchmarks for use in understanding the radiation embrittlement effects in the pressure vessels of operating light water power reactors. The requirements of such benchmarks for application to pressure vessel dosimetry are stated. Recent developments in active and passive neutron detectors sensitive in the ranges of importance to embrittlement studies are summarized and recommendations for improvements in the benchmark are made. (author)

Deaths from international terrorism compared with road crash deaths in OECD countries.

Science.gov (United States)

Wilson, N; Thomson, G

2005-12-01

To estimate the relative number of deaths in member countries of the Organisation for Economic Co-operation and Development (OECD) from international terrorism and road crashes. Data on deaths from international terrorism (US State Department database) were collated (1994-2003) and compared to the road injury deaths (year 2000 and 2001 data) from the OECD International Road Transport Accident Database. In the 29 OECD countries for which comparable data were available, the annual average death rate from road injury was approximately 390 times that from international terrorism. The ratio of annual road to international terrorism deaths (averaged over 10 years) was lowest for the United States at 142 times. In 2001, road crash deaths in the US were equal to those from a September 11 attack every 26 days. There is a large difference in the magnitude of these two causes of deaths from injury. Policy makers need to be aware of this when allocating resources to preventing these two avoidable causes of mortality.

Shielding benchmark problems, (2)

International Nuclear Information System (INIS)

Tanaka, Shun-ichi; Sasamoto, Nobuo; Oka, Yoshiaki; Shin, Kazuo; Tada, Keiko.

1980-02-01

Shielding benchmark problems prepared by Working Group of Assessment of Shielding Experiments in the Research Committee on Shielding Design in the Atomic Energy Society of Japan were compiled by Shielding Laboratory in Japan Atomic Energy Research Institute. Fourteen shielding benchmark problems are presented newly in addition to twenty-one problems proposed already, for evaluating the calculational algorithm and accuracy of computer codes based on discrete ordinates method and Monte Carlo method and for evaluating the nuclear data used in codes. The present benchmark problems are principally for investigating the backscattering and the streaming of neutrons and gamma rays in two- and three-dimensional configurations. (author)

Electricity consumption in school buildings - benchmark and web tools; Elforbrug i skoler - benchmark og webvaerktoej

Energy Technology Data Exchange (ETDEWEB)

NONE

2006-07-01

The aim of this project has been to produce benchmarks for electricity consumption in Danish schools in order to encourage electricity conservation. An internet programme has been developed with the aim of facilitating schools' access to benchmarks and to evaluate energy consumption. The overall purpose is to create increased attention to the electricity consumption of each separate school by publishing benchmarks which take the schools' age and number of pupils as well as after school activities into account. Benchmarks can be used to make green accounts and work as markers in e.g. energy conservation campaigns, energy management and for educational purposes. The internet tool can be found on www.energiguiden.dk. (BA)

HS06 Benchmark for an ARM Server

Science.gov (United States)

Kluth, Stefan

2014-06-01

We benchmarked an ARM cortex-A9 based server system with a four-core CPU running at 1.1 GHz. The system used Ubuntu 12.04 as operating system and the HEPSPEC 2006 (HS06) benchmarking suite was compiled natively with gcc-4.4 on the system. The benchmark was run for various settings of the relevant gcc compiler options. We did not find significant influence from the compiler options on the benchmark result. The final HS06 benchmark result is 10.4.

HS06 benchmark for an ARM server

International Nuclear Information System (INIS)

Kluth, Stefan

2014-01-01

We benchmarked an ARM cortex-A9 based server system with a four-core CPU running at 1.1 GHz. The system used Ubuntu 12.04 as operating system and the HEPSPEC 2006 (HS06) benchmarking suite was compiled natively with gcc-4.4 on the system. The benchmark was run for various settings of the relevant gcc compiler options. We did not find significant influence from the compiler options on the benchmark result. The final HS06 benchmark result is 10.4.

Performance Targets and External Benchmarking

DEFF Research Database (Denmark)

Friis, Ivar; Hansen, Allan; Vámosi, Tamás S.

Research on relative performance measures, transfer pricing, beyond budgeting initiatives, target costing, piece rates systems and value based management has for decades underlined the importance of external benchmarking in performance management. Research conceptualises external benchmarking...... as a market mechanism that can be brought inside the firm to provide incentives for continuous improvement and the development of competitive advances. However, whereas extant research primarily has focused on the importance and effects of using external benchmarks, less attention has been directed towards...... the conditions upon which the market mechanism is performing within organizations. This paper aims to contribute to research by providing more insight to the conditions for the use of external benchmarking as an element in performance management in organizations. Our study explores a particular type of external...

Human machine interaction research experience and perspectives as seen from the OECD Halden Reactor Project

International Nuclear Information System (INIS)

Oewre, F.

1999-01-01

In this paper a short review is given on important safety issues in the field of human machine interaction as expressed by important nuclear organisations such as USNRC, IAEA and the OECD NEA. Further on, a presentation is offered of research activities at the OECD Halden Reactor Project in the field of human machine interaction aiming to clarify some of the issues outlined by the above mentioned organisations. The OECD Halden Reactor Project is a joint undertaking of national nuclear organisations in 19 countries sponsoring a jointly financed research programme under the auspices of the OECD - Nuclear Energy Agency. One of the research areas is the man-machine systems research addressing the operator tasks in a control room environment. The overall objective is to provide a basis for improving today's control rooms through introduction of computer-based solutions for effective and safe execution of surveillance and control functions in normal as well as off-normal plant situations. (author)

An economic analysis of a major bio-fuel program undertaken by OECD countries

International Nuclear Information System (INIS)

2002-01-01

Biofuels such as ethanol and bio-diesel are creating a new demand for agricultural output and for agriculture land in Canada. However, the participation of other large countries with a large demand potential is necessary for bio-fuels to have a significant impact on the price of grains and oilseeds. This paper quantified the potential impact that a major bio-fuel program initiated by OECD countries has on grain and oilseed prices. The program was initiated for the period 1999 to 2006. There is considerable interest by Canadian producers to stimulate grain and oilseed prices by increasing demand of biofuels. This renewable energy source produces fewer greenhouse gas emissions than petroleum products. The analysis presented in this paper only considered ethanol from corn or wheat and bio-diesel from vegetable oils. It also focused only on the use of bio-fuels in the OECD transportation sector. The analysis was undertaken with AGLINK, a multi-commodity multi-country policy-specific dynamic model of the international agricultural markets built by the OECD with member countries. It was shown that the increase in world and domestic prices for grains and vegetable oils will remain strong, particularly toward 2006. It was also shown that a major bio-fuel program for all OECD countries would be beneficial to Canadian agriculture. It was concluded that ultimately, an increase in OECD bio-fuels usage has a direct impact on the demand for grains and oilseeds which are important feed-stocks in biofuel production. The analysis presumes an increase in renewable fuel use, but does not consider factors such as financial incentives and regulatory requirements that could bring about this increase. 7 refs., 6 tabs., 4 figs

Activities of the OECD/NEA Data Bank and its computer program service

International Nuclear Information System (INIS)

Sartori, E.

1991-01-01

The OECD/NEA Data Bank collects, tests and distributes computer programs and numerical data in the field of nuclear energy applications. This activity is coordinated with several similar centres in the United States (NESC, NNDC, RSIC) and outside the OECD are through an arrangement with the IAEA. This valuable information is shared worldwide for the benefit of scientists and engineers working on the safe and economic use of nuclear energy for peaceful applications. This article covers mainly the activities of the computer program service. (author). 4 figs

Benchmarking in Czech Higher Education

OpenAIRE

Plaček Michal; Ochrana František; Půček Milan

2015-01-01

The first part of this article surveys the current experience with the use of benchmarking at Czech universities specializing in economics and management. The results indicate that collaborative benchmarking is not used on this level today, but most actors show some interest in its introduction. The expression of the need for it and the importance of benchmarking as a very suitable performance-management tool in less developed countries are the impetus for the second part of our article. Base...

Benchmark simulation models, quo vadis?

Science.gov (United States)

Jeppsson, U; Alex, J; Batstone, D J; Benedetti, L; Comas, J; Copp, J B; Corominas, L; Flores-Alsina, X; Gernaey, K V; Nopens, I; Pons, M-N; Rodríguez-Roda, I; Rosen, C; Steyer, J-P; Vanrolleghem, P A; Volcke, E I P; Vrecko, D

2013-01-01

As the work of the IWA Task Group on Benchmarking of Control Strategies for wastewater treatment plants (WWTPs) is coming to an end, it is essential to disseminate the knowledge gained. For this reason, all authors of the IWA Scientific and Technical Report on benchmarking have come together to provide their insights, highlighting areas where knowledge may still be deficient and where new opportunities are emerging, and to propose potential avenues for future development and application of the general benchmarking framework and its associated tools. The paper focuses on the topics of temporal and spatial extension, process modifications within the WWTP, the realism of models, control strategy extensions and the potential for new evaluation tools within the existing benchmark system. We find that there are major opportunities for application within all of these areas, either from existing work already being done within the context of the benchmarking simulation models (BSMs) or applicable work in the wider literature. Of key importance is increasing capability, usability and transparency of the BSM package while avoiding unnecessary complexity.

A Seafloor Benchmark for 3-dimensional Geodesy

Science.gov (United States)

Chadwell, C. D.; Webb, S. C.; Nooner, S. L.

2014-12-01

We have developed an inexpensive, permanent seafloor benchmark to increase the longevity of seafloor geodetic measurements. The benchmark provides a physical tie to the sea floor lasting for decades (perhaps longer) on which geodetic sensors can be repeatedly placed and removed with millimeter resolution. Global coordinates estimated with seafloor geodetic techniques will remain attached to the benchmark allowing for the interchange of sensors as they fail or become obsolete, or for the sensors to be removed and used elsewhere, all the while maintaining a coherent series of positions referenced to the benchmark. The benchmark has been designed to free fall from the sea surface with transponders attached. The transponder can be recalled via an acoustic command sent from the surface to release from the benchmark and freely float to the sea surface for recovery. The duration of the sensor attachment to the benchmark will last from a few days to a few years depending on the specific needs of the experiment. The recovered sensors are then available to be reused at other locations, or again at the same site in the future. Three pins on the sensor frame mate precisely and unambiguously with three grooves on the benchmark. To reoccupy a benchmark a Remotely Operated Vehicle (ROV) uses its manipulator arm to place the sensor pins into the benchmark grooves. In June 2014 we deployed four benchmarks offshore central Oregon. We used the ROV Jason to successfully demonstrate the removal and replacement of packages onto the benchmark. We will show the benchmark design and its operational capabilities. Presently models of megathrust slip within the Cascadia Subduction Zone (CSZ) are mostly constrained by the sub-aerial GPS vectors from the Plate Boundary Observatory, a part of Earthscope. More long-lived seafloor geodetic measures are needed to better understand the earthquake and tsunami risk associated with a large rupture of the thrust fault within the Cascadia subduction zone

The Concepts "Benchmarks and Benchmarking" Used in Education Planning: Teacher Education as Example

Science.gov (United States)

Steyn, H. J.

2015-01-01

Planning in education is a structured activity that includes several phases and steps that take into account several kinds of information (Steyn, Steyn, De Waal & Wolhuter, 2002: 146). One of the sets of information that are usually considered is the (so-called) "benchmarks" and "benchmarking" regarding the focus of a…

Aerodynamic Benchmarking of the Deepwind Design

DEFF Research Database (Denmark)

Bedona, Gabriele; Schmidt Paulsen, Uwe; Aagaard Madsen, Helge

2015-01-01

The aerodynamic benchmarking for the DeepWind rotor is conducted comparing different rotor geometries and solutions and keeping the comparison as fair as possible. The objective for the benchmarking is to find the most suitable configuration in order to maximize the power production and minimize...... the blade solicitation and the cost of energy. Different parameters are considered for the benchmarking study. The DeepWind blade is characterized by a shape similar to the Troposkien geometry but asymmetric between the top and bottom parts: this shape is considered as a fixed parameter in the benchmarking...

INNOVATION POLICY FEATURES IN THE OECD COUNTRIES

Directory of Open Access Journals (Sweden)

Ivan Anisimov

2015-11-01

Full Text Available The purpose of the paper is to analyze the innovation policy features in the OECD countries and give the basic framework which defines rights and obligations of intellectual property rights (IPRs owners. Governments play an important role in determining demand-side policies, such as smart regulations, standards, consumer education, taxation and public procurement that can affect innovation. Because demand linked to supply, policies that affect both need to be better harnessed to drive long-term innovation and sustainable growth. Policies to stimulate innovation require taking account of changes in the international economy and the transformation of innovation processes. To transform invention into innovation requires a range of activities. Innovation now encompasses much more than research and development (R&D, albeit R&D remains vitally important. Methodology. The data for the paper is taken from the publications and reports of the European Commission, OECD, World Bank etc. In the paper the descriptive analysis, supported by the quantitative analysis is applied. Results. It is identified that rises in R&D intensity and innovation are driven by such factors: reduction of anti-competitive market regulations, which promotes business R&D and strengthens the incentives for innovations; stable economic conditions and low interest rates which encourage the growth of inno vation activity by creating a low-cost environment for investment in innovation; availability of internal and external finance. Practical implication. It is given the basic legal framework which defines rights and obligations of IPR owners: reviewing exemptions to copyright in the light of the internet’s different uses; clarifying exemptions for research use; promoting an active and open commercialization policy for universities; encouraging the commercialization and monetization of IPR: for example draft licensing contracts, valuation standards; standards: encouraging pooling

Benchmarking Global Food Safety Performances: The Era of Risk Intelligence.

Science.gov (United States)

Valleé, Jean-Charles Le; Charlebois, Sylvain

2015-10-01

Food safety data segmentation and limitations hamper the world's ability to select, build up, monitor, and evaluate food safety performance. Currently, there is no metric that captures the entire food safety system, and performance data are not collected strategically on a global scale. Therefore, food safety benchmarking is essential not only to help monitor ongoing performance but also to inform continued food safety system design, adoption, and implementation toward more efficient and effective food safety preparedness, responsiveness, and accountability. This comparative study identifies and evaluates common elements among global food safety systems. It provides an overall world ranking of food safety performance for 17 Organisation for Economic Co-Operation and Development (OECD) countries, illustrated by 10 indicators organized across three food safety risk governance domains: risk assessment (chemical risks, microbial risks, and national reporting on food consumption), risk management (national food safety capacities, food recalls, food traceability, and radionuclides standards), and risk communication (allergenic risks, labeling, and public trust). Results show all countries have very high food safety standards, but Canada and Ireland, followed by France, earned excellent grades relative to their peers. However, any subsequent global ranking study should consider the development of survey instruments to gather adequate and comparable national evidence on food safety.

Vver-1000 Mox core computational benchmark

International Nuclear Information System (INIS)

2006-01-01

The NEA Nuclear Science Committee has established an Expert Group that deals with the status and trends of reactor physics, fuel performance and fuel cycle issues related to disposing of weapons-grade plutonium in mixed-oxide fuel. The objectives of the group are to provide NEA member countries with up-to-date information on, and to develop consensus regarding, core and fuel cycle issues associated with burning weapons-grade plutonium in thermal water reactors (PWR, BWR, VVER-1000, CANDU) and fast reactors (BN-600). These issues concern core physics, fuel performance and reliability, and the capability and flexibility of thermal water reactors and fast reactors to dispose of weapons-grade plutonium in standard fuel cycles. The activities of the NEA Expert Group on Reactor-based Plutonium Disposition are carried out in close co-operation (jointly, in most cases) with the NEA Working Party on Scientific Issues in Reactor Systems (WPRS). A prominent part of these activities include benchmark studies. At the time of preparation of this report, the following benchmarks were completed or in progress: VENUS-2 MOX Core Benchmarks: carried out jointly with the WPRS (formerly the WPPR) (completed); VVER-1000 LEU and MOX Benchmark (completed); KRITZ-2 Benchmarks: carried out jointly with the WPRS (formerly the WPPR) (completed); Hollow and Solid MOX Fuel Behaviour Benchmark (completed); PRIMO MOX Fuel Performance Benchmark (ongoing); VENUS-2 MOX-fuelled Reactor Dosimetry Calculation (ongoing); VVER-1000 In-core Self-powered Neutron Detector Calculational Benchmark (started); MOX Fuel Rod Behaviour in Fast Power Pulse Conditions (started); Benchmark on the VENUS Plutonium Recycling Experiments Configuration 7 (started). This report describes the detailed results of the benchmark investigating the physics of a whole VVER-1000 reactor core using two-thirds low-enriched uranium (LEU) and one-third MOX fuel. It contributes to the computer code certification process and to the

Energy balances of non-OECD countries, 2001-2002. 2004 edition

International Nuclear Information System (INIS)

2004-01-01

This volume contains data on the supply and consumption of coal, oil, gas, electricity, heat, renewables and waste presented as comprehensive energy balances, expressed in tonnes of oil equivalent for over 100 non-OECD countries. Historical tables summarize production, trade and final consumption data as well as key energy and economic indicators. This book includes definitions of products and flows, explanatory notes on the individual country data and conversion factors from original units to tonnes of oil equivalent. More detailed data in original units are published in Energy Statistics of Non-OECD Countries 2001-2002, the sister volume of this publication. Bi-lingual edition: English - French. In general the CD-Rom and on-line service contain detailed time-series back to 1971

Shielding benchmark problems

International Nuclear Information System (INIS)

Tanaka, Shun-ichi; Sasamoto, Nobuo; Oka, Yoshiaki; Kawai, Masayoshi; Nakazawa, Masaharu.

1978-09-01

Shielding benchmark problems were prepared by the Working Group of Assessment of Shielding Experiments in the Research Comittee on Shielding Design of the Atomic Energy Society of Japan, and compiled by the Shielding Laboratory of Japan Atomic Energy Research Institute. Twenty-one kinds of shielding benchmark problems are presented for evaluating the calculational algorithm and the accuracy of computer codes based on the discrete ordinates method and the Monte Carlo method and for evaluating the nuclear data used in the codes. (author)

Dynamic benchmarking of simulation codes

International Nuclear Information System (INIS)

Henry, R.E.; Paik, C.Y.; Hauser, G.M.

1996-01-01

Computer simulation of nuclear power plant response can be a full-scope control room simulator, an engineering simulator to represent the general behavior of the plant under normal and abnormal conditions, or the modeling of the plant response to conditions that would eventually lead to core damage. In any of these, the underlying foundation for their use in analysing situations, training of vendor/utility personnel, etc. is how well they represent what has been known from industrial experience, large integral experiments and separate effects tests. Typically, simulation codes are benchmarked with some of these; the level of agreement necessary being dependent upon the ultimate use of the simulation tool. However, these analytical models are computer codes, and as a result, the capabilities are continually enhanced, errors are corrected, new situations are imposed on the code that are outside of the original design basis, etc. Consequently, there is a continual need to assure that the benchmarks with important transients are preserved as the computer code evolves. Retention of this benchmarking capability is essential to develop trust in the computer code. Given the evolving world of computer codes, how is this retention of benchmarking capabilities accomplished? For the MAAP4 codes this capability is accomplished through a 'dynamic benchmarking' feature embedded in the source code. In particular, a set of dynamic benchmarks are included in the source code and these are exercised every time the archive codes are upgraded and distributed to the MAAP users. Three different types of dynamic benchmarks are used: plant transients; large integral experiments; and separate effects tests. Each of these is performed in a different manner. The first is accomplished by developing a parameter file for the plant modeled and an input deck to describe the sequence; i.e. the entire MAAP4 code is exercised. The pertinent plant data is included in the source code and the computer

Benchmarking von Krankenhausinformationssystemen – eine vergleichende Analyse deutschsprachiger Benchmarkingcluster

Directory of Open Access Journals (Sweden)

Jahn, Franziska

2015-08-01

Full Text Available Benchmarking is a method of strategic information management used by many hospitals today. During the last years, several benchmarking clusters have been established within the German-speaking countries. They support hospitals in comparing and positioning their information system’s and information management’s costs, performance and efficiency against other hospitals. In order to differentiate between these benchmarking clusters and to provide decision support in selecting an appropriate benchmarking cluster, a classification scheme is developed. The classification scheme observes both general conditions and examined contents of the benchmarking clusters. It is applied to seven benchmarking clusters which have been active in the German-speaking countries within the last years. Currently, performance benchmarking is the most frequent benchmarking type, whereas the observed benchmarking clusters differ in the number of benchmarking partners and their cooperation forms. The benchmarking clusters also deal with different benchmarking subjects. Assessing costs and quality application systems, physical data processing systems, organizational structures of information management and IT services processes are the most frequent benchmarking subjects. There is still potential for further activities within the benchmarking clusters to measure strategic and tactical information management, IT governance and quality of data and data-processing processes. Based on the classification scheme and the comparison of the benchmarking clusters, we derive general recommendations for benchmarking of hospital information systems.

Medical school benchmarking - from tools to programmes.

Science.gov (United States)

Wilkinson, Tim J; Hudson, Judith N; Mccoll, Geoffrey J; Hu, Wendy C Y; Jolly, Brian C; Schuwirth, Lambert W T

2015-02-01

Benchmarking among medical schools is essential, but may result in unwanted effects. To apply a conceptual framework to selected benchmarking activities of medical schools. We present an analogy between the effects of assessment on student learning and the effects of benchmarking on medical school educational activities. A framework by which benchmarking can be evaluated was developed and applied to key current benchmarking activities in Australia and New Zealand. The analogy generated a conceptual framework that tested five questions to be considered in relation to benchmarking: what is the purpose? what are the attributes of value? what are the best tools to assess the attributes of value? what happens to the results? and, what is the likely "institutional impact" of the results? If the activities were compared against a blueprint of desirable medical graduate outcomes, notable omissions would emerge. Medical schools should benchmark their performance on a range of educational activities to ensure quality improvement and to assure stakeholders that standards are being met. Although benchmarking potentially has positive benefits, it could also result in perverse incentives with unforeseen and detrimental effects on learning if it is undertaken using only a few selected assessment tools.

Issues in Benchmark Metric Selection

Science.gov (United States)

Crolotte, Alain

It is true that a metric can influence a benchmark but will esoteric metrics create more problems than they will solve? We answer this question affirmatively by examining the case of the TPC-D metric which used the much debated geometric mean for the single-stream test. We will show how a simple choice influenced the benchmark and its conduct and, to some extent, DBMS development. After examining other alternatives our conclusion is that the “real” measure for a decision-support benchmark is the arithmetic mean.

OECD: andke töötukassale raha juurde/ Laura Raus

Index Scriptorium Estoniae

Raus, Laura

2011-01-01

Majanduskoostöö ja Arengu Organisatsiooni (OECD) riigiülevaate üksuse asejuht Robert Ford tutvustas organisatsiooni raportit Eesti majanduse kohta. Rahandusminister Jürgen Ligi ei pea kõiki soovitusi Eestile sobivaks

Benchmarking clinical photography services in the NHS.

Science.gov (United States)

Arbon, Giles

2015-01-01

Benchmarking is used in services across the National Health Service (NHS) using various benchmarking programs. Clinical photography services do not have a program in place and services have to rely on ad hoc surveys of other services. A trial benchmarking exercise was undertaken with 13 services in NHS Trusts. This highlights valuable data and comparisons that can be used to benchmark and improve services throughout the profession.

Benchmark Calculations on Halden IFA-650 LOCA Test Results

International Nuclear Information System (INIS)

Ek, Mirkka; Kekkonen, Laura; Kelppe, Seppo; Stengaard, J.O.; Josek, Radomir; Wiesenack, Wolfgang; Aounallah, Yacine; Wallin, Hannu; Grandjean, Claude; Herb, Joachim; Lerchl, Georg; Trambauer, Klaus; Sonnenburg, Heinz-Guenther; Nakajima, Tetsuo; Spykman, Gerold; Struzik, Christine

2010-01-01

The assessment of the consequences of a loss-of-coolant accident (LOCA) is to a large extent based on calculations carried out with codes especially developed for addressing the phenomena occurring during the transient. Since the time of the first LOCA experiments, which were largely conducted with fresh fuel, changes in fuel design, the introduction of new cladding materials and in particular the move to high burnup have not only generated a need to re-examine the LOCA safety criteria and to verify their continued validity, but also to confirm that codes show an appropriate performance especially with respect to high burnup phenomena influencing LOCA fuel behaviour. As part of international efforts, the OECD Halden Reactor Project program implemented a test series to address particular LOCA issues. Based on recommendations of a group of experts from the US NRC, EPRI, EDF, FRAMATOME-ANP and GNF, the primary objective of the experiments were defined as 1. Measure the extent of fuel (fragment) relocation into the ballooned region and evaluate its possible effect on cladding temperature and oxidation. 2. Investigate the extent (if any) of 'secondary transient hydriding' on the inner side of the cladding above and below the burst region. The Halden LOCA series, using high burnup fuel segments, contains test cases well suited for checking the ability of LOCA analysis codes to predict or reproduce the measurements and to provide clues as to where the codes need to be improved. The NEA Working Group on Fuel Safety, WGFS, therefore decided to conduct a code benchmark based on the Halden LOCA test series. Emphasis was on the codes' ability to predict or reproduce the thermal and mechanical response of fuel and cladding. Before starting the benchmark, participants were given the opportunity to tune their codes to the experimental system applied in the Halden LOCA tests. To this end, the data from the two commissioning runs were made available. The first of these runs went

Babies and bosses: reconciling work and family life : a synthesis of findings for OECD countries

National Research Council Canada - National Science Library

2007-01-01

... of population ageing, and well-designed policies may also help raise fertility rates from the exceptionally low levels that exist in some countries. In recent years, the OECD Babies and Bosses reviews of policies to promote work and family reconciliation covered Australia, Denmark and the Netherlands (OECD, 2002a); Austria, Ireland and ...

An OECD comparison of wind power and photovoltaics - approach to a consistent survey

International Nuclear Information System (INIS)

Wagner, H.J.; Ziemons, S.

1996-01-01

Adequate solutions are expected from renewable energy sources that may stop ozone depletion and contribute to resource conservation. Almost any OECD country is making efforts to promote photovoltaics and wind power. To give a survey of the measures taken and results obtained promotion programs are compared and the success achieved in the individual OECD countries is outlined. National energy institutions were interviewed and their 1993/94 programs were evaluated. Some of the data and statements are incomplete. (orig.) [de

Benchmarking Danish Industries

DEFF Research Database (Denmark)

Gammelgaard, Britta; Bentzen, Eric; Aagaard Andreassen, Mette

2003-01-01

compatible survey. The International Manufacturing Strategy Survey (IMSS) doesbring up the question of supply chain management, but unfortunately, we did not have access to thedatabase. Data from the members of the SCOR-model, in the form of benchmarked performance data,may exist, but are nonetheless...... not public. The survey is a cooperative project "Benchmarking DanishIndustries" with CIP/Aalborg University, the Danish Technological University, the DanishTechnological Institute and Copenhagen Business School as consortia partners. The project has beenfunded by the Danish Agency for Trade and Industry...

OECD Health Care Quality Indicator Project. The expert panel on primary care prevention and health promotion

NARCIS (Netherlands)

Marshall, Martin; Klazinga, Niek; Leatherman, Sheila; Hardy, Charlie; Bergmann, Eckhard; Pisco, Luis; Mattke, Soeren; Mainz, Jan

2006-01-01

PURPOSE: This article describes a project undertaken as part of the Organization for Economic Co-operation and Development (OECD)'s Healthcare Quality Indicator (HCQI) Project, which aimed to develop a set of quality indicators representing the domains of primary care, prevention and health

Unemployment and prostate cancer mortality in the OECD, 1990-2009.

Science.gov (United States)

Maruthappu, Mahiben; Watkins, Johnathan; Taylor, Abigail; Williams, Callum; Ali, Raghib; Zeltner, Thomas; Atun, Rifat

2015-01-01

The global economic downturn has been associated with increased unemployment in many countries. Insights into the impact of unemployment on specific health conditions remain limited. We determined the association between unemployment and prostate cancer mortality in members of the Organisation for Economic Co-operation and Development (OECD). We used multivariate regression analysis to assess the association between changes in unemployment and prostate cancer mortality in OECD member states between 1990 and 2009. Country-specific differences in healthcare infrastructure, population structure, and population size were controlled for and lag analyses conducted. Several robustness checks were also performed. Time trend analyses were used to predict the number of excess deaths from prostate cancer following the 2008 global recession. Between 1990 and 2009, a 1% rise in unemployment was associated with an increase in prostate cancer mortality. Lag analysis showed a continued increase in mortality years after unemployment rises. The association between unemployment and prostate cancer mortality remained significant in robustness checks with 46 controls. Eight of the 21 OECD countries for which a time trend analysis was conducted, exhibited an estimated excess of prostate cancer deaths in at least one of 2008, 2009, or 2010, based on 2000-2007 trends. Rises in unemployment are associated with significant increases in prostate cancer mortality. Initiatives that bolster employment may help to minimise prostate cancer mortality during times of economic hardship.

Benchmarking of human resources management

Directory of Open Access Journals (Sweden)

David M. Akinnusi

2008-11-01

Full Text Available This paper reviews the role of human resource management (HRM which, today, plays a strategic partnership role in management. The focus of the paper is on HRM in the public sector, where much hope rests on HRM as a means of transforming the public service and achieving much needed service delivery. However, a critical evaluation of HRM practices in the public sector reveals that these services leave much to be desired. The paper suggests the adoption of benchmarking as a process to revamp HRM in the public sector so that it is able to deliver on its promises. It describes the nature and process of benchmarking and highlights the inherent difficulties in applying benchmarking in HRM. It concludes with some suggestions for a plan of action. The process of identifying “best” practices in HRM requires the best collaborative efforts of HRM practitioners and academicians. If used creatively, benchmarking has the potential to bring about radical and positive changes in HRM in the public sector. The adoption of the benchmarking process is, in itself, a litmus test of the extent to which HRM in the public sector has grown professionally.

Integrating Best Practice and Performance Indicators To Benchmark the Performance of a School System. Benchmarking Paper 940317.

Science.gov (United States)

Cuttance, Peter

This paper provides a synthesis of the literature on the role of benchmarking, with a focus on its use in the public sector. Benchmarking is discussed in the context of quality systems, of which it is an important component. The paper describes the basic types of benchmarking, pertinent research about its application in the public sector, the…

An Emerging Knowledge-Based Economy in China? Indicators from OECD Databases. OECD Science, Technology and Industry Working Papers, 2004/4

Science.gov (United States)

Criscuolo, Chiara; Martin, Ralf

2004-01-01

The main objective of this Working Paper is to show a set of indicators on the knowledge-based economy for China, mainly compiled from databases within EAS, although data from databases maintained by other parts of the OECD are included as well. These indicators are put in context by comparison with data for the United States, Japan and the EU (or…

Benchmarking and Sustainable Transport Policy

DEFF Research Database (Denmark)

Gudmundsson, Henrik; Wyatt, Andrew; Gordon, Lucy

2004-01-01

Order to learn from the best. In 2000 the European Commission initiated research to explore benchmarking as a tool to promote policies for ‘sustainable transport’. This paper reports findings and recommendations on how to address this challenge. The findings suggest that benchmarking is a valuable...... tool that may indeed help to move forward the transport policy agenda. However, there are major conditions and limitations. First of all it is not always so straightforward to delimit, measure and compare transport services in order to establish a clear benchmark. Secondly ‘sustainable transport......’ evokes a broad range of concerns that are hard to address fully at the level of specific practices. Thirdly policies are not directly comparable across space and context. For these reasons attempting to benchmark ‘sustainable transport policies’ against one another would be a highly complex task, which...

Summary of nuclear power and fuel cycle data in OECD member countries

International Nuclear Information System (INIS)

1986-04-01

A questionnaire on Electricity Generation, Nuclear Power and Fuel Cycle Data is distributed annually to OECD Member Countries. In the questionnaire of January 1986, countries were asked to provide historical data for 1984 and 1985 and most likely projections up to the year 2005. The replies to the questionnaire are presented in this Summary. Not all countries have revised or made new projections since the April 1985 issue. Too few countries were able to provide projections beyond 2000 to include data for 2005 in this year's Summary. Data for 1985 are in some cases provisional. Where no data were available the Secretariat made estimates, based on information of IEA, IAEA, the previous Brown Book, OECD/IEA Energy Statistics and other sources. The electricity generation and production data for fuel cycle services refer to those facilities located within the country, and thus exclude imports. The fuel cycle requirements, however, refer to the amounts of fuel cycle services necessary for national nuclear power programmes. The Addendum contains an analysis of the present and past projections for OECD nuclear capacity to 2000

A Comparative Study of Suicide Rates among 10–19-Year-Olds in 29 OECD Countries

Science.gov (United States)

Roh, Beop-Rae; Jung, Eun Hee; Hong, Hyun Ju

2018-01-01

Objective This study had two main objectives: to compare current suicide rates in OECD countries among 10–19-year-olds and to identify patterns of suicide rates based on age, gender and time. Furthermore we investigated the main dimensions that contributed to the variation in child and adolescent suicide rates across countries. Methods We combined the WHO mortality data and the population data released by OECD to calculate the suicide rates in 29 OECD countries. A self-organizing map (SOM), k-means clustering analysis, and multi-dimensional scaling were used to classify countries based on similarities in suicide rate structure and to identify the important dimensions accounting for differences among groups. Results We identified significant differences in suicide rates depending on age, sex, country, and time period. Late adolescence and male gender were universal risk factors for suicide, and we observed a general trend of declining suicide rates in OECD countries. The SOM analysis yielded eight types of countries. Most countries showed gender gaps in suicide rates of similar magnitudes; however, there were outliers in which the gender gap was particularly large or small. Conclusion Significant variation exists with respect to suicide rates and their associated gender gaps in OECD countries. PMID:29486551

Benchmarking for Cost Improvement. Final report

Energy Technology Data Exchange (ETDEWEB)

1993-09-01

The US Department of Energy`s (DOE) Office of Environmental Restoration and Waste Management (EM) conducted the Benchmarking for Cost Improvement initiative with three objectives: Pilot test benchmarking as an EM cost improvement tool; identify areas for cost improvement and recommend actions to address these areas; provide a framework for future cost improvement. The benchmarking initiative featured the use of four principal methods (program classification, nationwide cost improvement survey, paired cost comparison and component benchmarking). Interested parties contributed during both the design and execution phases. The benchmarking initiative was conducted on an accelerated basis. Of necessity, it considered only a limited set of data that may not be fully representative of the diverse and complex conditions found at the many DOE installations. The initiative generated preliminary data about cost differences and it found a high degree of convergence on several issues. Based on this convergence, the report recommends cost improvement strategies and actions. This report describes the steps taken as part of the benchmarking initiative and discusses the findings and recommended actions for achieving cost improvement. The results and summary recommendations, reported below, are organized by the study objectives.

Benchmarking for controllere: metoder, teknikker og muligheder

DEFF Research Database (Denmark)

Bukh, Per Nikolaj; Sandalgaard, Niels Erik; Dietrichson, Lars Grubbe

2008-01-01

Benchmarking indgår på mange måder i både private og offentlige virksomheders ledelsespraksis. I økonomistyring anvendes benchmark-baserede indikatorer (eller nøgletal), eksempelvis ved fastlæggelse af mål i resultatkontrakter eller for at angive det ønskede niveau for visse nøgletal i et Balanced...... Scorecard eller tilsvarende målstyringsmodeller. Artiklen redegør for begrebet benchmarking ved at præsentere og diskutere forskellige facetter af det, samt redegør for fire forskellige anvendelser af benchmarking for at vise begrebets bredde og væsentligheden af at klarlægge formålet med et...... benchmarkingprojekt. Dernæst bliver forskellen på resultatbenchmarking og procesbenchmarking behandlet, hvorefter brugen af intern hhv. ekstern benchmarking, samt brugen af benchmarking i budgetlægning og budgetopfølgning, behandles....

Professional Performance and Bureaucratic Benchmarking Information

DEFF Research Database (Denmark)

Schneider, Melanie L.; Mahlendorf, Matthias D.; Schäffer, Utz

Prior research documents positive effects of benchmarking information provision on performance and attributes this to social comparisons. However, the effects on professional recipients are unclear. Studies of professional control indicate that professional recipients often resist bureaucratic...... controls because of organizational-professional conflicts. We therefore analyze the association between bureaucratic benchmarking information provision and professional performance and suggest that the association is more positive if prior professional performance was low. We test our hypotheses based...... on archival, publicly disclosed, professional performance data for 191 German orthopedics departments, matched with survey data on bureaucratic benchmarking information given to chief orthopedists by the administration. We find a positive association between bureaucratic benchmarking information provision...

EPA's Benchmark Dose Modeling Software

Science.gov (United States)

The EPA developed the Benchmark Dose Software (BMDS) as a tool to help Agency risk assessors facilitate applying benchmark dose (BMD) method’s to EPA’s human health risk assessment (HHRA) documents. The application of BMD methods overcomes many well know limitations ...

Accelerator shielding benchmark problems

International Nuclear Information System (INIS)

Hirayama, H.; Ban, S.; Nakamura, T.

1993-01-01

Accelerator shielding benchmark problems prepared by Working Group of Accelerator Shielding in the Research Committee on Radiation Behavior in the Atomic Energy Society of Japan were compiled by Radiation Safety Control Center of National Laboratory for High Energy Physics. Twenty-five accelerator shielding benchmark problems are presented for evaluating the calculational algorithm, the accuracy of computer codes and the nuclear data used in codes. (author)

Energy efficiency of selected OECD countries: A slacks based model with undesirable outputs

International Nuclear Information System (INIS)

Apergis, Nicholas; Aye, Goodness C.; Barros, Carlos Pestana; Gupta, Rangan; Wanke, Peter

2015-01-01

This paper presents an efficiency assessment of selected OECD countries using a Slacks Based Model with undesirable or bad outputs (SBM-Undesirable). In this research, SBM-Undesirable is used first in a two-stage approach to assess the relative efficiency of OECD countries using the most frequent indicators adopted by the literature on energy efficiency. Besides, in the second stage, GLMM–MCMC methods are combined with SBM-Undesirable results as part of an attempt to produce a model for energy performance with effective predictive ability. The results reveal different impacts of contextual variables, such as economic blocks and capital–labor ratio, on energy efficiency levels. - Highlights: • We analyze the energy efficiency of selected OECD countries. • SBM-Undesirable and MCMC–GLMM are combined for this purpose. • Find that efficiency levels are high but declining over time. • Analysis with contextual variables shows varying efficiency levels across groups. • Capital-intensive countries are more energy efficient than labor-intensive countries.

Have Public Finances in the OECD Area Been Sustainable?

Directory of Open Access Journals (Sweden)

Ferraz Ricardo

2018-03-01

Full Text Available The aim of this article is to test, from an empirical standpoint, the existence of sustainable public finances in the Organisation for Economic Co-operation and Development (OECD area as a whole, over the most recent period of the world economy, 1973-2016. The research methods include not only standard stationarity tests, but also tests, which allow for a structural break. The relevant results of this research are a stationary public budget balance expressed as a percentage of GDP and a debt to GDP ratio that is stationary in first differences. According to the literature, this means that a “necessary and sufficient” condition is fulfilled for proving the existence of a strong sustainability. We hope this research can make a valuable contribution to the debate regarding public finances in the world economy. To obtain other relevant conclusions, additional tests will need to be performed in the future in order to assess which members are contributing to the fiscal sustainability of the OECD aggregate.

Deviating From the Benchmarks

DEFF Research Database (Denmark)

Rocha, Vera; Van Praag, Mirjam; Carneiro, Anabela

This paper studies three related questions: To what extent otherwise similar startups employ different quantities and qualities of human capital at the moment of entry? How persistent are initial human capital choices over time? And how does deviating from human capital benchmarks influence firm......, founders human capital, and the ownership structure of startups (solo entrepreneurs versus entrepreneurial teams). We then study the survival implications of exogenous deviations from these benchmarks, based on spline models for survival data. Our results indicate that (especially negative) deviations from...... the benchmark can be substantial, are persistent over time, and hinder the survival of firms. The implications may, however, vary according to the sector and the ownership structure at entry. Given the stickiness of initial choices, wrong human capital decisions at entry turn out to be a close to irreversible...

Benchmark Two-Good Utility Functions

NARCIS (Netherlands)

de Jaegher, K.

Benchmark two-good utility functions involving a good with zero income elasticity and unit income elasticity are well known. This paper derives utility functions for the additional benchmark cases where one good has zero cross-price elasticity, unit own-price elasticity, and zero own price

Developing integrated benchmarks for DOE performance measurement

Energy Technology Data Exchange (ETDEWEB)

Barancik, J.I.; Kramer, C.F.; Thode, Jr. H.C.

1992-09-30

The objectives of this task were to describe and evaluate selected existing sources of information on occupational safety and health with emphasis on hazard and exposure assessment, abatement, training, reporting, and control identifying for exposure and outcome in preparation for developing DOE performance benchmarks. Existing resources and methodologies were assessed for their potential use as practical performance benchmarks. Strengths and limitations of current data resources were identified. Guidelines were outlined for developing new or improved performance factors, which then could become the basis for selecting performance benchmarks. Data bases for non-DOE comparison populations were identified so that DOE performance could be assessed relative to non-DOE occupational and industrial groups. Systems approaches were described which can be used to link hazards and exposure, event occurrence, and adverse outcome factors, as needed to generate valid, reliable, and predictive performance benchmarks. Data bases were identified which contain information relevant to one or more performance assessment categories . A list of 72 potential performance benchmarks was prepared to illustrate the kinds of information that can be produced through a benchmark development program. Current information resources which may be used to develop potential performance benchmarks are limited. There is need to develop an occupational safety and health information and data system in DOE, which is capable of incorporating demonstrated and documented performance benchmarks prior to, or concurrent with the development of hardware and software. A key to the success of this systems approach is rigorous development and demonstration of performance benchmark equivalents to users of such data before system hardware and software commitments are institutionalized.

Benchmarking gate-based quantum computers

Science.gov (United States)

Michielsen, Kristel; Nocon, Madita; Willsch, Dennis; Jin, Fengping; Lippert, Thomas; De Raedt, Hans

2017-11-01

With the advent of public access to small gate-based quantum processors, it becomes necessary to develop a benchmarking methodology such that independent researchers can validate the operation of these processors. We explore the usefulness of a number of simple quantum circuits as benchmarks for gate-based quantum computing devices and show that circuits performing identity operations are very simple, scalable and sensitive to gate errors and are therefore very well suited for this task. We illustrate the procedure by presenting benchmark results for the IBM Quantum Experience, a cloud-based platform for gate-based quantum computing.

A Heterogeneous Medium Analytical Benchmark

International Nuclear Information System (INIS)

Ganapol, B.D.

1999-01-01

A benchmark, called benchmark BLUE, has been developed for one-group neutral particle (neutron or photon) transport in a one-dimensional sub-critical heterogeneous plane parallel medium with surface illumination. General anisotropic scattering is accommodated through the Green's Function Method (GFM). Numerical Fourier transform inversion is used to generate the required Green's functions which are kernels to coupled integral equations that give the exiting angular fluxes. The interior scalar flux is then obtained through quadrature. A compound iterative procedure for quadrature order and slab surface source convergence provides highly accurate benchmark qualities (4- to 5- places of accuracy) results

Benchmarking i eksternt regnskab og revision

DEFF Research Database (Denmark)

Thinggaard, Frank; Kiertzner, Lars

2001-01-01

løbende i en benchmarking-proces. Dette kapitel vil bredt undersøge, hvor man med nogen ret kan få benchmarking-begrebet knyttet til eksternt regnskab og revision. Afsnit 7.1 beskæftiger sig med det eksterne årsregnskab, mens afsnit 7.2 tager fat i revisionsområdet. Det sidste afsnit i kapitlet opsummerer...... betragtningerne om benchmarking i forbindelse med begge områder....

A framework for benchmarking land models

Directory of Open Access Journals (Sweden)

Y. Q. Luo

2012-10-01

Full Text Available Land models, which have been developed by the modeling community in the past few decades to predict future states of ecosystems and climate, have to be critically evaluated for their performance skills of simulating ecosystem responses and feedback to climate change. Benchmarking is an emerging procedure to measure performance of models against a set of defined standards. This paper proposes a benchmarking framework for evaluation of land model performances and, meanwhile, highlights major challenges at this infant stage of benchmark analysis. The framework includes (1 targeted aspects of model performance to be evaluated, (2 a set of benchmarks as defined references to test model performance, (3 metrics to measure and compare performance skills among models so as to identify model strengths and deficiencies, and (4 model improvement. Land models are required to simulate exchange of water, energy, carbon and sometimes other trace gases between the atmosphere and land surface, and should be evaluated for their simulations of biophysical processes, biogeochemical cycles, and vegetation dynamics in response to climate change across broad temporal and spatial scales. Thus, one major challenge is to select and define a limited number of benchmarks to effectively evaluate land model performance. The second challenge is to develop metrics of measuring mismatches between models and benchmarks. The metrics may include (1 a priori thresholds of acceptable model performance and (2 a scoring system to combine data–model mismatches for various processes at different temporal and spatial scales. The benchmark analyses should identify clues of weak model performance to guide future development, thus enabling improved predictions of future states of ecosystems and climate. The near-future research effort should be on development of a set of widely acceptable benchmarks that can be used to objectively, effectively, and reliably evaluate fundamental properties

EPRI depletion benchmark calculations using PARAGON

International Nuclear Information System (INIS)

Kucukboyaci, Vefa N.

2015-01-01

Highlights: • PARAGON depletion calculations are benchmarked against the EPRI reactivity decrement experiments. • Benchmarks cover a wide range of enrichments, burnups, cooling times, and burnable absorbers, and different depletion and storage conditions. • Results from PARAGON-SCALE scheme are more conservative relative to the benchmark data. • ENDF/B-VII based data reduces the excess conservatism and brings the predictions closer to benchmark reactivity decrement values. - Abstract: In order to conservatively apply burnup credit in spent fuel pool criticality analyses, code validation for both fresh and used fuel is required. Fresh fuel validation is typically done by modeling experiments from the “International Handbook.” A depletion validation can determine a bias and bias uncertainty for the worth of the isotopes not found in the fresh fuel critical experiments. Westinghouse’s burnup credit methodology uses PARAGON™ (Westinghouse 2-D lattice physics code) and its 70-group cross-section library, which have been benchmarked, qualified, and licensed both as a standalone transport code and as a nuclear data source for core design simulations. A bias and bias uncertainty for the worth of depletion isotopes, however, are not available for PARAGON. Instead, the 5% decrement approach for depletion uncertainty is used, as set forth in the Kopp memo. Recently, EPRI developed a set of benchmarks based on a large set of power distribution measurements to ascertain reactivity biases. The depletion reactivity has been used to create 11 benchmark cases for 10, 20, 30, 40, 50, and 60 GWd/MTU and 3 cooling times 100 h, 5 years, and 15 years. These benchmark cases are analyzed with PARAGON and the SCALE package and sensitivity studies are performed using different cross-section libraries based on ENDF/B-VI.3 and ENDF/B-VII data to assess that the 5% decrement approach is conservative for determining depletion uncertainty

In situ research and investigations in OECD countries

International Nuclear Information System (INIS)

1988-01-01

This report explains why deep geological disposal is the most favoured option for the disposal of high level waste and spent fuel, as well as some alpha bearing wastes. It also gives an overview of the main aim and elements of in-situ research and investigation activities in OECD countries, as well as of initiatives taken at an international level

An Internal Audit Perspective on Differences between European Corporate Governance Codes and OECD Principles

OpenAIRE

Raluca Ivan

2015-01-01

The main purpose of this research is to realize an analysis from an internal audit perspective of European Corporate Governance Codes, in regards with Organization for Economic Cooperation and Development – OECD Principles of Corporate Governance. The research methodology used a classification of countries by legal regime, trying to obtain a global view over the differences between the European corporate governance codes and the OECD Principles provisions, from internal audit’s perspective. T...

The Role of the OECD and the EU in the Development of Labour Market Policy in the Czech Republic

Directory of Open Access Journals (Sweden)

Caroline Anne de la Porte

2009-12-01

Full Text Available This article analyses the role of the OECD through its “Jobs Strategy” and the European Union (EU through the “European Employment Strategy” in the development of macro-economic, employment and labour market policy in the Czech Republic. As a full member of the two organisations, the Czech Republic has been subject to their soft non-binding policy advice in the area of labour market reform. The OECD and EU policy models are similar, both insisting on growth-oriented macro-economic policy, supported by active labour market policies, an active and effective public employment service (PES and the de-regulation of labour markets. However, the OECD actively advocates private actor involvement in labour markets, while the EU insists on the role of the public sector. The inquisitive styles of the two organisations differ: the OECD has a decontextualised and quantified analysis of performance accompanied by a supportive in-depth qualitative analysis, while the EU has a more contextualised analysis, which is also more politicised. However, the EU’s policy is partially supported by European structural funds, while the OECD has no comparable instrument. Despite some differences in policy model and inquisitive style, both the OECD and the EU have given the same major policy recommendations over time to the Czech Republic, although the OECD has insisted more on de-regulation, whereas the EU has also emphasised worker security and anti-discrimination. In macro-economic policy, de-regulation and increasing flexibility on the labour market, the Czech Republic conforms with OECD and EU policy models and recommendations. The PES has been developed institutionally to fit both models. However, activation, shifts in expenditure from passive to active labour market policy, training and placement of the PES have not changed substantially since the Czech Republic became member of the EU, suggesting that the real impact of the OECD and the EU has been weak.

Golden Relics & Historical Standards: How the OECD is Expanding Global Education Governance through PISA for Development

Science.gov (United States)

Addey, Camilla

2017-01-01

Setting this paper against the backdrop of scholarly research on recent changes in the OECD's approach and workings in education, I analyse how the OECD has reinforced its infrastructural and epistemological global governance through the Programme for International Student Assessment (PISA) for Development (PISA-D). Drawing on qualitative data,…

Ad hoc committee on reactor physics benchmarks

International Nuclear Information System (INIS)

Diamond, D.J.; Mosteller, R.D.; Gehin, J.C.

1996-01-01

In the spring of 1994, an ad hoc committee on reactor physics benchmarks was formed under the leadership of two American Nuclear Society (ANS) organizations. The ANS-19 Standards Subcommittee of the Reactor Physics Division and the Computational Benchmark Problem Committee of the Mathematics and Computation Division had both seen a need for additional benchmarks to help validate computer codes used for light water reactor (LWR) neutronics calculations. Although individual organizations had employed various means to validate the reactor physics methods that they used for fuel management, operations, and safety, additional work in code development and refinement is under way, and to increase accuracy, there is a need for a corresponding increase in validation. Both organizations thought that there was a need to promulgate benchmarks based on measured data to supplement the LWR computational benchmarks that have been published in the past. By having an organized benchmark activity, the participants also gain by being able to discuss their problems and achievements with others traveling the same route

Computational Chemistry Comparison and Benchmark Database

Science.gov (United States)

SRD 101 NIST Computational Chemistry Comparison and Benchmark Database (Web, free access)   The NIST Computational Chemistry Comparison and Benchmark Database is a collection of experimental and ab initio thermochemical properties for a selected set of molecules. The goals are to provide a benchmark set of molecules for the evaluation of ab initio computational methods and allow the comparison between different ab initio computational methods for the prediction of thermochemical properties.

MTCB: A Multi-Tenant Customizable database Benchmark

NARCIS (Netherlands)

van der Zijden, WIm; Hiemstra, Djoerd; van Keulen, Maurice

2017-01-01

We argue that there is a need for Multi-Tenant Customizable OLTP systems. Such systems need a Multi-Tenant Customizable Database (MTC-DB) as a backing. To stimulate the development of such databases, we propose the benchmark MTCB. Benchmarks for OLTP exist and multi-tenant benchmarks exist, but no

Internal Benchmarking for Institutional Effectiveness

Science.gov (United States)

Ronco, Sharron L.

2012-01-01

Internal benchmarking is an established practice in business and industry for identifying best in-house practices and disseminating the knowledge about those practices to other groups in the organization. Internal benchmarking can be done with structures, processes, outcomes, or even individuals. In colleges or universities with multicampuses or a…

Broadband and Unbundling Regulations in OECD Countries

OpenAIRE

Wallsten, Scott

2006-01-01

Broadband penetration and available speeds vary widely across OECD countries. Policymakers around the world, and especially in countries like the U.S. that lag in the rankings, are searching for policies to narrow those gaps. Relatively little empirical work tests possible reasons for these differences. In this paper I test the impacts of regulations and demographics on broadband development in a panel dataset across countries. In addition to adding to the meager empirical literature on broad...

Globalization and Social Justice in OECD Countries

OpenAIRE

Björn Kauder; Niklas Potrafke

2015-01-01

Social justice is a topic of importance to social scientists and also political decision makers. We examine the relationship between globalization and social justice as measured by a new indicator for 31 OECD countries. The results show that countries that experienced rapid globalization enjoy social justice. When the KOF index of globalization increases by one standard deviation, the social justice indicator increases by about 0.4 points (on a scale from 1 to 10). The policy implication is t...

Analysis of the OECD/NRC BWR Turbine Trip Transient Benchmark with the Coupled Thermal-Hydraulics and Neutronics Code TRAC-M/PARCS

International Nuclear Information System (INIS)

Lee, Deokjung; Downar, Thomas J.; Ulses, Anthony; Akdeniz, Bedirhan; Ivanov, Kostadin N.

2004-01-01

An analysis of the Peach Bottom Unit 2 Turbine Trip 2 (TT2) experiment has been performed using the U.S. Nuclear Regulatory Commission coupled thermal-hydraulics and neutronics code TRAC-M/PARCS. The objective of the analysis was to assess the performance of TRAC-M/PARCS on a BWR transient with significance in two-phase flow and spatial variations of the neutron flux. TRAC-M/PARCS results are found to be in good agreement with measured plant data for both steady-state and transient phases of the benchmark. Additional analyses of four fictitious extreme scenarios are performed to provide a basis for code-to-code comparisons and comprehensive testing of the thermal-hydraulics/neutronics coupling. The obtained results of sensitivity studies on the effect of direct moderator heating on transient simulation indicate the importance of this modeling aspect

Benchmarking the Netherlands. Benchmarking for growth

International Nuclear Information System (INIS)

2003-01-01

This is the fourth edition of the Ministry of Economic Affairs' publication 'Benchmarking the Netherlands', which aims to assess the competitiveness of the Dutch economy. The methodology and objective of the benchmarking remain the same. The basic conditions for economic activity (institutions, regulation, etc.) in a number of benchmark countries are compared in order to learn from the solutions found by other countries for common economic problems. This publication is devoted entirely to the potential output of the Dutch economy. In other words, its ability to achieve sustainable growth and create work over a longer period without capacity becoming an obstacle. This is important because economic growth is needed to increase prosperity in the broad sense and meeting social needs. Prosperity in both a material (per capita GDP) and immaterial (living environment, environment, health, etc) sense, in other words. The economy's potential output is determined by two structural factors: the growth of potential employment and the structural increase in labour productivity. Analysis by the Netherlands Bureau for Economic Policy Analysis (CPB) shows that in recent years the increase in the capacity for economic growth has been realised mainly by increasing the supply of labour and reducing the equilibrium unemployment rate. In view of the ageing of the population in the coming years and decades the supply of labour is unlikely to continue growing at the pace we have become accustomed to in recent years. According to a number of recent studies, to achieve a respectable rate of sustainable economic growth the aim will therefore have to be to increase labour productivity. To realise this we have to focus on for six pillars of economic policy: (1) human capital, (2) functioning of markets, (3) entrepreneurship, (4) spatial planning, (5) innovation, and (6) sustainability. These six pillars determine the course for economic policy aiming at higher productivity growth. Throughout

Benchmarking the Netherlands. Benchmarking for growth

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-01-01

This is the fourth edition of the Ministry of Economic Affairs' publication 'Benchmarking the Netherlands', which aims to assess the competitiveness of the Dutch economy. The methodology and objective of the benchmarking remain the same. The basic conditions for economic activity (institutions, regulation, etc.) in a number of benchmark countries are compared in order to learn from the solutions found by other countries for common economic problems. This publication is devoted entirely to the potential output of the Dutch economy. In other words, its ability to achieve sustainable growth and create work over a longer period without capacity becoming an obstacle. This is important because economic growth is needed to increase prosperity in the broad sense and meeting social needs. Prosperity in both a material (per capita GDP) and immaterial (living environment, environment, health, etc) sense, in other words. The economy's potential output is determined by two structural factors: the growth of potential employment and the structural increase in labour productivity. Analysis by the Netherlands Bureau for Economic Policy Analysis (CPB) shows that in recent years the increase in the capacity for economic growth has been realised mainly by increasing the supply of labour and reducing the equilibrium unemployment rate. In view of the ageing of the population in the coming years and decades the supply of labour is unlikely to continue growing at the pace we have become accustomed to in recent years. According to a number of recent studies, to achieve a respectable rate of sustainable economic growth the aim will therefore have to be to increase labour productivity. To realise this we have to focus on for six pillars of economic policy: (1) human capital, (2) functioning of markets, (3) entrepreneurship, (4) spatial planning, (5) innovation, and (6) sustainability. These six pillars determine the course for economic policy aiming at higher productivity

EPA's Role with the Organization for Economic Cooperation and Development (OECD)

Science.gov (United States)

The Organization for Economic Cooperation and Development (OECD) brings together the governments of countries committed to democracy and the market economy from around the world to support sustainable economic growth.

Nuclear model codes and related software distributed by the OECD/NEA Data Bank

International Nuclear Information System (INIS)

Sartori, E.

1993-01-01

Software and data for nuclear energy applications is acquired, tested and distributed by several information centres; in particular, relevant computer codes are distributed internationally by the OECD/NEA Data Bank (France) and by ESTSC and EPIC/RSIC (United States). This activity is coordinated among the centres and is extended outside the OECD area through an arrangement with the IAEA. This article covers more specifically the availability of nuclear model codes and also those codes which further process their results into data sets needed for specific nuclear application projects. (author). 2 figs

Benchmark simulation models, quo vadis?

DEFF Research Database (Denmark)

Jeppsson, U.; Alex, J; Batstone, D. J.

2013-01-01

As the work of the IWA Task Group on Benchmarking of Control Strategies for wastewater treatment plants (WWTPs) is coming to an end, it is essential to disseminate the knowledge gained. For this reason, all authors of the IWA Scientific and Technical Report on benchmarking have come together to p...

Benchmark for Strategic Performance Improvement.

Science.gov (United States)

Gohlke, Annette

1997-01-01

Explains benchmarking, a total quality management tool used to measure and compare the work processes in a library with those in other libraries to increase library performance. Topics include the main groups of upper management, clients, and staff; critical success factors for each group; and benefits of benchmarking. (Author/LRW)

Revaluering benchmarking - A topical theme for the construction industry

DEFF Research Database (Denmark)

Rasmussen, Grane Mikael Gregaard

2011-01-01

and questioning the concept objectively. This paper addresses the underlying nature of benchmarking, and accounts for the importance of focusing attention on the sociological impacts benchmarking has in organizations. To understand these sociological impacts, benchmarking research needs to transcend...... the perception of benchmarking systems as secondary and derivative and instead studying benchmarking as constitutive of social relations and as irredeemably social phenomena. I have attempted to do so in this paper by treating benchmarking using a calculative practice perspective, and describing how...

The periodic safety review of nuclear power plants. Practices in OECD countries

International Nuclear Information System (INIS)

1992-01-01

This report gives an overview of the regulatory concepts and practices for the periodic safety review of nuclear power plants in OECD countries with nuclear power programmes. The statutory bases for such reviews, their objectives and the processes adopted are summarised against the background of each country's regulatory practices. Although periodic safety reviews are now, or will soon be, part of the regulatory process in the majority of countries, the national approaches to these reviews still differ considerably. This report includes numerous examples of the different concepts and practices in OECD countries, thereby illustrating the variety of ways adopted to reach the common goal of maintaining and improving nuclear safety

Establishing benchmarks and metrics for utilization management.

Science.gov (United States)

Melanson, Stacy E F

2014-01-01

The changing environment of healthcare reimbursement is rapidly leading to a renewed appreciation of the importance of utilization management in the clinical laboratory. The process of benchmarking of laboratory operations is well established for comparing organizational performance to other hospitals (peers) and for trending data over time through internal benchmarks. However, there are relatively few resources available to assist organizations in benchmarking for laboratory utilization management. This article will review the topic of laboratory benchmarking with a focus on the available literature and services to assist in managing physician requests for laboratory testing. © 2013.

OECD/NEA multi-lateral cooperation in the area of structural integrity & aging management

Energy Technology Data Exchange (ETDEWEB)

Breest, A. [Nuclear Energy Agency, Issy-les-Moulineaux (France); Gott, K. [MATSAFE AB, Stockholm (Sweden); Lydell, B. [SIGMA-PHASE Inc., Vail, AZ (United States); Riznic, J. [Canadian Nuclear Safety Commission, Ottawa, ON (Canada)

2014-07-01

Several OECD Member Countries have agreed to establish the OECD/NEA 'Component Operational Experience, Degradation & Ageing Programme' (CODAP) to encourage multilateral co-operation in the collection and analysis of data relating to degradation and failure of metallic piping and non-piping metallic passive components in commercial nuclear power plants. The scope of the data collection includes service-induced wall thinning, part through-wall cracks, through-wall cracks with and without active leakage, and instances of significant degradation of metallic passive components, including piping pressure boundary integrity. The OECD/NEA Committee on the Safety of Nuclear Installations (CSNI) acts as an umbrella committee of the Project. CODAP is the continuation of the 2002-2011 'OECD/NEA Pipe Failure Data Exchange Project' (OPDE) and the Stress Corrosion Cracking Working Group of the 2006-2010 'OECD/NEA SCC and Cable Ageing project' (SCAP). OPDE was formally launched in May 2002. Upon completion of the 3rd Term (May 2011), the OPDE project was officially closed to be succeeded by CODAP. SCAP was enabled by a voluntary contribution from Japan. It was formally launched in June 2006 and officially closed with an international workshop held in Tokyo in May 2010. Majority of the Member Organizations of the two projects were the same, often being represented by the same person. In May 2011, thirteen countries signed the CODAP 1st Term agreement (Canada, Chinese Taipei, Czech Republic, Finland, France, Germany, Korea (Republic of), Japan, Slovak Republic, Spain, Sweden, Switzerland and United States of America). The 1st Term (2011-2014) work plan includes the preparation of Topical Reports to foster technical cooperation and to deepen the understanding of national differences in ageing management. The Topical Reports constitute CODAP Event Database and Knowledge Base insights reports and as such act as portals for future in-depth studies of

How Benchmarking and Higher Education Came Together

Science.gov (United States)

Levy, Gary D.; Ronco, Sharron L.

2012-01-01

This chapter introduces the concept of benchmarking and how higher education institutions began to use benchmarking for a variety of purposes. Here, benchmarking is defined as a strategic and structured approach whereby an organization compares aspects of its processes and/or outcomes to those of another organization or set of organizations to…

A Benchmark for Evaluating Moving Object Indexes

DEFF Research Database (Denmark)

Chen, Su; Jensen, Christian Søndergaard; Lin, Dan

2008-01-01

that targets techniques for the indexing of the current and near-future positions of moving objects. This benchmark enables the comparison of existing and future indexing techniques. It covers important aspects of such indexes that have not previously been covered by any benchmark. Notable aspects covered......Progress in science and engineering relies on the ability to measure, reliably and in detail, pertinent properties of artifacts under design. Progress in the area of database-index design thus relies on empirical studies based on prototype implementations of indexes. This paper proposes a benchmark...... include update efficiency, query efficiency, concurrency control, and storage requirements. Next, the paper applies the benchmark to half a dozen notable moving-object indexes, thus demonstrating the viability of the benchmark and offering new insight into the performance properties of the indexes....

Benchmarking infrastructure for mutation text mining.

Science.gov (United States)

Klein, Artjom; Riazanov, Alexandre; Hindle, Matthew M; Baker, Christopher Jo

2014-02-25

Experimental research on the automatic extraction of information about mutations from texts is greatly hindered by the lack of consensus evaluation infrastructure for the testing and benchmarking of mutation text mining systems. We propose a community-oriented annotation and benchmarking infrastructure to support development, testing, benchmarking, and comparison of mutation text mining systems. The design is based on semantic standards, where RDF is used to represent annotations, an OWL ontology provides an extensible schema for the data and SPARQL is used to compute various performance metrics, so that in many cases no programming is needed to analyze results from a text mining system. While large benchmark corpora for biological entity and relation extraction are focused mostly on genes, proteins, diseases, and species, our benchmarking infrastructure fills the gap for mutation information. The core infrastructure comprises (1) an ontology for modelling annotations, (2) SPARQL queries for computing performance metrics, and (3) a sizeable collection of manually curated documents, that can support mutation grounding and mutation impact extraction experiments. We have developed the principal infrastructure for the benchmarking of mutation text mining tasks. The use of RDF and OWL as the representation for corpora ensures extensibility. The infrastructure is suitable for out-of-the-box use in several important scenarios and is ready, in its current state, for initial community adoption.

Benchmarking infrastructure for mutation text mining

Science.gov (United States)

2014-01-01

Background Experimental research on the automatic extraction of information about mutations from texts is greatly hindered by the lack of consensus evaluation infrastructure for the testing and benchmarking of mutation text mining systems. Results We propose a community-oriented annotation and benchmarking infrastructure to support development, testing, benchmarking, and comparison of mutation text mining systems. The design is based on semantic standards, where RDF is used to represent annotations, an OWL ontology provides an extensible schema for the data and SPARQL is used to compute various performance metrics, so that in many cases no programming is needed to analyze results from a text mining system. While large benchmark corpora for biological entity and relation extraction are focused mostly on genes, proteins, diseases, and species, our benchmarking infrastructure fills the gap for mutation information. The core infrastructure comprises (1) an ontology for modelling annotations, (2) SPARQL queries for computing performance metrics, and (3) a sizeable collection of manually curated documents, that can support mutation grounding and mutation impact extraction experiments. Conclusion We have developed the principal infrastructure for the benchmarking of mutation text mining tasks. The use of RDF and OWL as the representation for corpora ensures extensibility. The infrastructure is suitable for out-of-the-box use in several important scenarios and is ready, in its current state, for initial community adoption. PMID:24568600

Benchmarking: A Process for Improvement.

Science.gov (United States)

Peischl, Thomas M.

One problem with the outcome-based measures used in higher education is that they measure quantity but not quality. Benchmarking, or the use of some external standard of quality to measure tasks, processes, and outputs, is partially solving that difficulty. Benchmarking allows for the establishment of a systematic process to indicate if outputs…

Financial Inequity in Basic Education in Selected OECD Countries

Science.gov (United States)

Zhang, Yu; Mizunoya, Suguru; You, You; Tsang, Mun

2011-01-01

This is a study of financial disparities in primary and secondary education in OECD countries that have a relatively large population and a school finance system with decentralized features. These countries include the United States, Britain, Australia, Spain, Canada, and Japan. There are two major research questions: What are the trends in…

Taxation and Skills. OECD Tax Policy Studies. No. 24

Science.gov (United States)

OECD Publishing, 2017

2017-01-01

This Tax Policy Study on Taxation and Skills examines how tax policy can encourage skills development in OECD countries. This study also assesses the returns to tertiary and adult education and examines how these returns are shared between governments and students. The study builds indicators that examine incentives for individuals and governments…

Analysis of the international criticality benchmark no 19 of a realistic fuel dissolver

International Nuclear Information System (INIS)

Smith, H.J.; Santamarina, A.

1991-01-01

The dispersion of the order of 12000 pcm in the results of the international criticality fuel dissolver benchmark calculation, exercise OECD/19, showed the necessity of analysing the calculational methods used in this case. The APOLLO/PIC method developed to treat this type of problem permits us to propose international reference values. The problem studied here, led us to investigate two supplementary parameters in addition to the double heterogeneity of the fuel: the reactivity variation as a function of moderation and the effects of the size of the fuel pellets during dissolution. The following conclusions were obtained: The fast cross-section sets used by the international SCALE package introduces a bias of - 3000 pcm in undermoderated lattices. More generally, the fast and resonance nuclear data in criticality codes are not sufficiently reliable. Geometries with micro-pellets led to an underestimation of reactivity at the end of dissolution of 3000 pcm in certain 1988 Sn calculations; this bias was avoided in the up-dated 1990 computation because of a correct use of calculation tools. The reactivity introduced by the dissolved fuel is underestimated by 3000 pcm in contributions based on the standard NITAWL module in the SCALE code. More generally, the neutron balance analysis pointed out that standard ND self shielding formalism cannot account for 238 U resonance mutual self-shielding in the pellet-fissile liquor interaction. The combination of these three types of bias explain the underestimation of all of the international contributions of the reactivity of dissolver lattices by -2000 to -6000 pcm. The improved 1990 calculations confirm the need to use rigorous methods in the calculation of systems which involve the fuel double heterogeneity. This study points out the importance of periodic benchmarking exercises for probing the efficacity of criticality codes, data libraries and the users

Hospital benchmarking: are U.S. eye hospitals ready?

Science.gov (United States)

de Korne, Dirk F; van Wijngaarden, Jeroen D H; Sol, Kees J C A; Betz, Robert; Thomas, Richard C; Schein, Oliver D; Klazinga, Niek S

2012-01-01

Benchmarking is increasingly considered a useful management instrument to improve quality in health care, but little is known about its applicability in hospital settings. The aims of this study were to assess the applicability of a benchmarking project in U.S. eye hospitals and compare the results with an international initiative. We evaluated multiple cases by applying an evaluation frame abstracted from the literature to five U.S. eye hospitals that used a set of 10 indicators for efficiency benchmarking. Qualitative analysis entailed 46 semistructured face-to-face interviews with stakeholders, document analyses, and questionnaires. The case studies only partially met the conditions of the evaluation frame. Although learning and quality improvement were stated as overall purposes, the benchmarking initiative was at first focused on efficiency only. No ophthalmic outcomes were included, and clinicians were skeptical about their reporting relevance and disclosure. However, in contrast with earlier findings in international eye hospitals, all U.S. hospitals worked with internal indicators that were integrated in their performance management systems and supported benchmarking. Benchmarking can support performance management in individual hospitals. Having a certain number of comparable institutes provide similar services in a noncompetitive milieu seems to lay fertile ground for benchmarking. International benchmarking is useful only when these conditions are not met nationally. Although the literature focuses on static conditions for effective benchmarking, our case studies show that it is a highly iterative and learning process. The journey of benchmarking seems to be more important than the destination. Improving patient value (health outcomes per unit of cost) requires, however, an integrative perspective where clinicians and administrators closely cooperate on both quality and efficiency issues. If these worlds do not share such a relationship, the added

Radiation Detection Computational Benchmark Scenarios

Energy Technology Data Exchange (ETDEWEB)

Shaver, Mark W.; Casella, Andrew M.; Wittman, Richard S.; McDonald, Ben S.

2013-09-24

Modeling forms an important component of radiation detection development, allowing for testing of new detector designs, evaluation of existing equipment against a wide variety of potential threat sources, and assessing operation performance of radiation detection systems. This can, however, result in large and complex scenarios which are time consuming to model. A variety of approaches to radiation transport modeling exist with complementary strengths and weaknesses for different problems. This variety of approaches, and the development of promising new tools (such as ORNL’s ADVANTG) which combine benefits of multiple approaches, illustrates the need for a means of evaluating or comparing different techniques for radiation detection problems. This report presents a set of 9 benchmark problems for comparing different types of radiation transport calculations, identifying appropriate tools for classes of problems, and testing and guiding the development of new methods. The benchmarks were drawn primarily from existing or previous calculations with a preference for scenarios which include experimental data, or otherwise have results with a high level of confidence, are non-sensitive, and represent problem sets of interest to NA-22. From a technical perspective, the benchmarks were chosen to span a range of difficulty and to include gamma transport, neutron transport, or both and represent different important physical processes and a range of sensitivity to angular or energy fidelity. Following benchmark identification, existing information about geometry, measurements, and previous calculations were assembled. Monte Carlo results (MCNP decks) were reviewed or created and re-run in order to attain accurate computational times and to verify agreement with experimental data, when present. Benchmark information was then conveyed to ORNL in order to guide testing and development of hybrid calculations. The results of those ADVANTG calculations were then sent to PNNL for

WWER-1000 Burnup Credit Benchmark (CB5)

International Nuclear Information System (INIS)

Manolova, M.A.

2002-01-01

In the paper the specification of WWER-1000 Burnup Credit Benchmark first phase (depletion calculations), given. The second phase - criticality calculations for the WWER-1000 fuel pin cell, will be given after the evaluation of the results, obtained at the first phase. The proposed benchmark is a continuation of the WWER benchmark activities in this field (Author)

The role of benchmarking for yardstick competition

International Nuclear Information System (INIS)

Burns, Phil; Jenkins, Cloda; Riechmann, Christoph

2005-01-01

With the increasing interest in yardstick regulation, there is a need to understand the most appropriate method for realigning tariffs at the outset. Benchmarking is the tool used for such realignment and is therefore a necessary first-step in the implementation of yardstick competition. A number of concerns have been raised about the application of benchmarking, making some practitioners reluctant to move towards yardstick based regimes. We assess five of the key concerns often discussed and find that, in general, these are not as great as perceived. The assessment is based on economic principles and experiences with applying benchmarking to regulated sectors, e.g. in the electricity and water industries in the UK, The Netherlands, Austria and Germany in recent years. The aim is to demonstrate that clarity on the role of benchmarking reduces the concern about its application in different regulatory regimes. We find that benchmarking can be used in regulatory settlements, although the range of possible benchmarking approaches that are appropriate will be small for any individual regulatory question. Benchmarking is feasible as total cost measures and environmental factors are better defined in practice than is commonly appreciated and collusion is unlikely to occur in environments with more than 2 or 3 firms (where shareholders have a role in monitoring and rewarding performance). Furthermore, any concern about companies under-recovering costs is a matter to be determined through the regulatory settlement and does not affect the case for using benchmarking as part of that settlement. (author)

OECD/NEA activities on the safety of new reactors

International Nuclear Information System (INIS)

Reig, Javier

2010-01-01

The Nuclear Energy Agency, a member of the OECD family, has as mission, in line with the overall aim of the OECD, to assist Agency's member countries in maintaining and further developing through international cooperation, the scientific, technological and legal bases for a safe, environmentally friendly and economic use of nuclear energy for peaceful purposes. Our members include very advanced nuclear countries and represent a big part of the world's nuclear capacity. In addition, we have a well established and formal relationship with the Russian Federation and the IAEA. Two years ago, the NEA celebrated its 50th anniversary of providing assistance to its member countries in supporting the safe use of nuclear power. Nuclear power will remain a key part of the energy mix for many decades to come and, as such, the NEA looks forward to continuing its value-adding work in the field of nuclear power. Korea joined the NEA in 24 May, 1993. While the NEA is satisfied that we have in place an effective process of work, we are always looking for ways to improve. This is the reason why we have since 1999 a series of strategic plans in order to better focus on the objectives that member countries assign to the Agency for meeting the economical, environmental and societal challenges of the coming years. The important changes that have occurred in the energy and nuclear landscapes, as well as in the OECD framework, are the basis for these revisions insofar as they influence the NEA's role and activities. We are now completing the process for the new Strategic Plan which will apply from 2011 to 2017. Nuclear safety and regulation is and will continue to be the first priority of the Agency. The NEA will assist member countries to continue sharing information, best practices and lessons learned to enhance nuclear safety worldwide

SP2Bench: A SPARQL Performance Benchmark

Science.gov (United States)

Schmidt, Michael; Hornung, Thomas; Meier, Michael; Pinkel, Christoph; Lausen, Georg

A meaningful analysis and comparison of both existing storage schemes for RDF data and evaluation approaches for SPARQL queries necessitates a comprehensive and universal benchmark platform. We present SP2Bench, a publicly available, language-specific performance benchmark for the SPARQL query language. SP2Bench is settled in the DBLP scenario and comprises a data generator for creating arbitrarily large DBLP-like documents and a set of carefully designed benchmark queries. The generated documents mirror vital key characteristics and social-world distributions encountered in the original DBLP data set, while the queries implement meaningful requests on top of this data, covering a variety of SPARQL operator constellations and RDF access patterns. In this chapter, we discuss requirements and desiderata for SPARQL benchmarks and present the SP2Bench framework, including its data generator, benchmark queries and performance metrics.

Labour Taxation in Poland Compared to the Other OECD Countries

Directory of Open Access Journals (Sweden)

Kryńska Elżbieta

2014-09-01

Full Text Available Celem opracowania jest identyfikacja wysokości i zróżnicowania opodatkowania pracy, wyrażanego poprzez tzw. klin podatkowy, w Polsce na tle krajów OECD. Identyfikacji tej dokonano na podstawie analizy danych statystycznych zgromadzonych w bazie OECD obejmujących lata 2000-2012. W opracowaniu dokonano interpretacji pojęć kluczowych, takich jak opodatkowanie pracy, klin podatkowy i pozapłacowe koszty pracy. W dalszej części syntetycznie omówiono ustalenia teoretyczne i wyniki badań empirycznych dotyczących skutków opodatkowania pracy dla funkcjonowania rynku pracy, a zwłaszcza jego wpływ na zatrudnienie i bezrobocie. Badania własne objęły analizę porównawczą wielkości klina podatkowego w różnych typach gospodarstw domowych w Polsce i pozostałych krajach OECD w latach 2000-2012. Najważniejszą konstatacją wynikającą z analiz jest, iż w Polsce opodatkowanie pracy w zbyt małym stopniu uwzględnia sytuację materialną osób nisko zarabiających oraz mających nautrzymaniu dzieci. Wyniki przeprowadzonych badań stały się podstawą sformułowania wniosków syntetycznych i rekomendacji dla Polski. Zasugerowano w nich przede wszystkim, by rozważono selektywne obniżenie pozapłacowych kosztów pracy osób nisko zarabiających oraz obciążonych obowiązkami rodzinnymi.

Benchmarking specialty hospitals, a scoping review on theory and practice.

Science.gov (United States)

Wind, A; van Harten, W H

2017-04-04

Although benchmarking may improve hospital processes, research on this subject is limited. The aim of this study was to provide an overview of publications on benchmarking in specialty hospitals and a description of study characteristics. We searched PubMed and EMBASE for articles published in English in the last 10 years. Eligible articles described a project stating benchmarking as its objective and involving a specialty hospital or specific patient category; or those dealing with the methodology or evaluation of benchmarking. Of 1,817 articles identified in total, 24 were included in the study. Articles were categorized into: pathway benchmarking, institutional benchmarking, articles on benchmark methodology or -evaluation and benchmarking using a patient registry. There was a large degree of variability:(1) study designs were mostly descriptive and retrospective; (2) not all studies generated and showed data in sufficient detail; and (3) there was variety in whether a benchmarking model was just described or if quality improvement as a consequence of the benchmark was reported upon. Most of the studies that described a benchmark model described the use of benchmarking partners from the same industry category, sometimes from all over the world. Benchmarking seems to be more developed in eye hospitals, emergency departments and oncology specialty hospitals. Some studies showed promising improvement effects. However, the majority of the articles lacked a structured design, and did not report on benchmark outcomes. In order to evaluate the effectiveness of benchmarking to improve quality in specialty hospitals, robust and structured designs are needed including a follow up to check whether the benchmark study has led to improvements.

Full sphere hydrodynamic and dynamo benchmarks

KAUST Repository

Marti, P.

2014-01-26

Convection in planetary cores can generate fluid flow and magnetic fields, and a number of sophisticated codes exist to simulate the dynamic behaviour of such systems. We report on the first community activity to compare numerical results of computer codes designed to calculate fluid flow within a whole sphere. The flows are incompressible and rapidly rotating and the forcing of the flow is either due to thermal convection or due to moving boundaries. All problems defined have solutions that alloweasy comparison, since they are either steady, slowly drifting or perfectly periodic. The first two benchmarks are defined based on uniform internal heating within the sphere under the Boussinesq approximation with boundary conditions that are uniform in temperature and stress-free for the flow. Benchmark 1 is purely hydrodynamic, and has a drifting solution. Benchmark 2 is a magnetohydrodynamic benchmark that can generate oscillatory, purely periodic, flows and magnetic fields. In contrast, Benchmark 3 is a hydrodynamic rotating bubble benchmark using no slip boundary conditions that has a stationary solution. Results from a variety of types of code are reported, including codes that are fully spectral (based on spherical harmonic expansions in angular coordinates and polynomial expansions in radius), mixed spectral and finite difference, finite volume, finite element and also a mixed Fourier-finite element code. There is good agreement between codes. It is found that in Benchmarks 1 and 2, the approximation of a whole sphere problem by a domain that is a spherical shell (a sphere possessing an inner core) does not represent an adequate approximation to the system, since the results differ from whole sphere results. © The Authors 2014. Published by Oxford University Press on behalf of The Royal Astronomical Society.

Development of a California commercial building benchmarking database

International Nuclear Information System (INIS)

Kinney, Satkartar; Piette, Mary Ann

2002-01-01

Building energy benchmarking is a useful starting point for commercial building owners and operators to target energy savings opportunities. There are a number of tools and methods for benchmarking energy use. Benchmarking based on regional data can provides more relevant information for California buildings than national tools such as Energy Star. This paper discusses issues related to benchmarking commercial building energy use and the development of Cal-Arch, a building energy benchmarking database for California. Currently Cal-Arch uses existing survey data from California's Commercial End Use Survey (CEUS), a largely underutilized wealth of information collected by California's major utilities. Doe's Commercial Building Energy Consumption Survey (CBECS) is used by a similar tool, Arch, and by a number of other benchmarking tools. Future versions of Arch/Cal-Arch will utilize additional data sources including modeled data and individual buildings to expand the database

Review of the OECD specialist meeting on continuous monitoring techniques for assuring coolant circuit integrity

International Nuclear Information System (INIS)

Thie, J.A.

1986-01-01

This article summarizes the OECD Specialist Meeting on Continuous Monitoring Techniques for Assuring Coolant Circuit Integrity held August 12-14, 1985, in London. The conference was organized by the Organization for Economic Cooperation and Development's (OECD's) Committee on the Safety for Nuclear Installations and hosted by Her Majesty's Nuclear Installation Inspectorate at King's College. Many other conferences have addressed analysis and inspection approaches to ensuring primary-system integrity, but the OECD meeting was structured to pay attention to the continuous monitoring approach - possibly the first conference to be so designed. The specific technologies represented were vibrations, noise (i.e., random fluctuations in signals), leaks, acoustic emission, and cyclic fatigue. Although water reactors dominate the papers, all reactor types were included. A diverse group of about 50 attendees from 11 countries participated, including representatives from utilities, suppliers, regulators, and researchers

How benchmarking can improve patient nutrition.

Science.gov (United States)

Ellis, Jane

Benchmarking is a tool that originated in business to enable organisations to compare their services with industry-wide best practice. Early last year the Department of Health published The Essence of Care, a benchmarking toolkit adapted for use in health care. It focuses on eight elements of care that are crucial to patients' experiences. Nurses and other health care professionals at a London NHS trust have begun a trust-wide benchmarking project. The aim is to improve patients' experiences of health care by sharing and comparing information, and by identifying examples of good practice and areas for improvement. The project began with two of the eight elements of The Essence of Care, with the intention of covering the rest later. This article describes the benchmarking process for nutrition and some of the consequent improvements in care.

XWeB: The XML Warehouse Benchmark

Science.gov (United States)

Mahboubi, Hadj; Darmont, Jérôme

With the emergence of XML as a standard for representing business data, new decision support applications are being developed. These XML data warehouses aim at supporting On-Line Analytical Processing (OLAP) operations that manipulate irregular XML data. To ensure feasibility of these new tools, important performance issues must be addressed. Performance is customarily assessed with the help of benchmarks. However, decision support benchmarks do not currently support XML features. In this paper, we introduce the XML Warehouse Benchmark (XWeB), which aims at filling this gap. XWeB derives from the relational decision support benchmark TPC-H. It is mainly composed of a test data warehouse that is based on a unified reference model for XML warehouses and that features XML-specific structures, and its associate XQuery decision support workload. XWeB's usage is illustrated by experiments on several XML database management systems.

IAEA sodium void reactivity benchmark calculations

International Nuclear Information System (INIS)

Hill, R.N.; Finck, P.J.

1992-01-01

In this paper, the IAEA-1 992 ''Benchmark Calculation of Sodium Void Reactivity Effect in Fast Reactor Core'' problem is evaluated. The proposed design is a large axially heterogeneous oxide-fueled fast reactor as described in Section 2; the core utilizes a sodium plenum above the core to enhance leakage effects. The calculation methods used in this benchmark evaluation are described in Section 3. In Section 4, the calculated core performance results for the benchmark reactor model are presented; and in Section 5, the influence of steel and interstitial sodium heterogeneity effects is estimated

Benchmark Imagery FY11 Technical Report

Energy Technology Data Exchange (ETDEWEB)

Roberts, R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Pope, P. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2011-06-14

This report details the work performed in FY11 under project LL11-GS-PD06, “Benchmark Imagery for Assessing Geospatial Semantic Extraction Algorithms.” The original LCP for the Benchmark Imagery project called for creating a set of benchmark imagery for verifying and validating algorithms that extract semantic content from imagery. More specifically, the first year was slated to deliver real imagery that had been annotated, the second year to deliver real imagery that had composited features, and the final year was to deliver synthetic imagery modeled after the real imagery.

Review for session K - benchmarks

International Nuclear Information System (INIS)

McCracken, A.K.

1980-01-01

Eight of the papers to be considered in Session K are directly concerned, at least in part, with the Pool Critical Assembly (P.C.A.) benchmark at Oak Ridge. The remaining seven papers in this session, the subject of this review, are concerned with a variety of topics related to the general theme of Benchmarks and will be considered individually

Tourism Destination Benchmarking: Evaluation and Selection of the Benchmarking Partners

Directory of Open Access Journals (Sweden)

Luštický Martin

2012-03-01

Full Text Available Tourism development has an irreplaceable role in regional policy of almost all countries. This is due to its undeniable benefits for the local population with regards to the economic, social and environmental sphere. Tourist destinations compete for visitors at tourism market and subsequently get into a relatively sharp competitive struggle. The main goal of regional governments and destination management institutions is to succeed in this struggle by increasing the competitiveness of their destination. The quality of strategic planning and final strategies is a key factor of competitiveness. Even though the tourism sector is not the typical field where the benchmarking methods are widely used, such approaches could be successfully applied. The paper focuses on key phases of the benchmarking process which lies in the search for suitable referencing partners. The partners are consequently selected to meet general requirements to ensure the quality if strategies. Following from this, some specific characteristics are developed according to the SMART approach. The paper tests this procedure with an expert evaluation of eight selected regional tourism strategies of regions in the Czech Republic, Slovakia and Great Britain. In this way it validates the selected criteria in the frame of the international environment. Hence, it makes it possible to find strengths and weaknesses of selected strategies and at the same time facilitates the discovery of suitable benchmarking partners.

Comparing the OECD's and Norway's Orientation to Equity in Their Teacher Education Policies--Teacher Autonomy under Attack?

Science.gov (United States)

Haugen, Cecilie Ronning

2013-01-01

More and more nations are losing the ability to control their education systems. OECD is an important premise provider for educational policymaking championing a neoliberal agenda. With the aim to investigate the impact the OECD may have on national policymaking, this paper compares their recent teacher education policies with those of Norway. The…

Statistical benchmarking in utility regulation: Role, standards and methods

International Nuclear Information System (INIS)

Newton Lowry, Mark; Getachew, Lullit

2009-01-01

Statistical benchmarking is being used with increasing frequency around the world in utility rate regulation. We discuss how and where benchmarking is in use for this purpose and the pros and cons of regulatory benchmarking. We then discuss alternative performance standards and benchmarking methods in regulatory applications. We use these to propose guidelines for the appropriate use of benchmarking in the rate setting process. The standards, which we term the competitive market and frontier paradigms, have a bearing on method selection. These along with regulatory experience suggest that benchmarking can either be used for prudence review in regulation or to establish rates or rate setting mechanisms directly

Development of a California commercial building benchmarking database

Energy Technology Data Exchange (ETDEWEB)

Kinney, Satkartar; Piette, Mary Ann

2002-05-17

Building energy benchmarking is a useful starting point for commercial building owners and operators to target energy savings opportunities. There are a number of tools and methods for benchmarking energy use. Benchmarking based on regional data can provides more relevant information for California buildings than national tools such as Energy Star. This paper discusses issues related to benchmarking commercial building energy use and the development of Cal-Arch, a building energy benchmarking database for California. Currently Cal-Arch uses existing survey data from California's Commercial End Use Survey (CEUS), a largely underutilized wealth of information collected by California's major utilities. Doe's Commercial Building Energy Consumption Survey (CBECS) is used by a similar tool, Arch, and by a number of other benchmarking tools. Future versions of Arch/Cal-Arch will utilize additional data sources including modeled data and individual buildings to expand the database.

Man-machine systems research at the OECD Halden reactor project

International Nuclear Information System (INIS)

Owre, F.; Bjorlo, T.J.; Haugset, K.

1994-01-01

The OECD Halden Reactor Project is a jointly financed research programme under the auspices of the OECD - Nuclear Energy Agency with fifteen participating countries. One of the main research topics focuses on man-machine systems. Particular attention is paid to the operator's tasks in the reactor control room environment. The overall objective of the research in this field is to provide a basis for improving today's control rooms through the introduction of computer-based solutions for the effective and safe execution of surveillance and control functions in normal as well as off-normal plant situations. The programme comprises four main activities: the verification and validation of safety critical software systems; man-machine interaction research emphasizing improvements in man-machine interfaces on the basis of human factors studies; computerised operator support systems assisting the operator in fault detection/diagnosis and planning of control actions; and control room development providing a basis for retrofitting of existing control rooms and for the design of advanced concepts

OECD Halden reactor project

International Nuclear Information System (INIS)

1977-01-01

The activities of the OECD Halden Reactor Project for the year 1975 are summarized. The period under review is the last year of the three year joint programme which commenced on 1st January, 1973. The main items reported upon are: process supervision and control, test fuel irradiation and fuel research, reactor operations, and administration and finance. The process supervision and control work has been concentrated in two fields: methods development for core surveillance and control, and systems development for operator-process communication. As for fuel test, investigations of the densification phenomenon have continued through irradiations to a maximum of about 16000MWd/tUO 2 . Axial and radial deformations of fuel rods are studied, with the effect of power transients upon the dimensional stability of fuel rods, and fuel-cladding heat transfer and fuel temperature. Thermal models for steady state and transient heat transfer in fuel rods have been developed and the work on thermomechanical models of claddings shows considerable promise

40 CFR 141.172 - Disinfection profiling and benchmarking.

Science.gov (United States)

2010-07-01

... benchmarking. 141.172 Section 141.172 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... Disinfection-Systems Serving 10,000 or More People § 141.172 Disinfection profiling and benchmarking. (a... sanitary surveys conducted by the State. (c) Disinfection benchmarking. (1) Any system required to develop...

Raising Quality and Achievement. A College Guide to Benchmarking.

Science.gov (United States)

Owen, Jane

This booklet introduces the principles and practices of benchmarking as a way of raising quality and achievement at further education colleges in Britain. Section 1 defines the concept of benchmarking. Section 2 explains what benchmarking is not and the steps that should be taken before benchmarking is initiated. The following aspects and…

Benchmarking and Performance Management

Directory of Open Access Journals (Sweden)

Adrian TANTAU

2010-12-01

Full Text Available The relevance of the chosen topic is explained by the meaning of the firm efficiency concept - the firm efficiency means the revealed performance (how well the firm performs in the actual market environment given the basic characteristics of the firms and their markets that are expected to drive their profitability (firm size, market power etc.. This complex and relative performance could be due to such things as product innovation, management quality, work organization, some other factors can be a cause even if they are not directly observed by the researcher. The critical need for the management individuals/group to continuously improve their firm/company’s efficiency and effectiveness, the need for the managers to know which are the success factors and the competitiveness determinants determine consequently, what performance measures are most critical in determining their firm’s overall success. Benchmarking, when done properly, can accurately identify both successful companies and the underlying reasons for their success. Innovation and benchmarking firm level performance are critical interdependent activities. Firm level variables, used to infer performance, are often interdependent due to operational reasons. Hence, the managers need to take the dependencies among these variables into account when forecasting and benchmarking performance. This paper studies firm level performance using financial ratio and other type of profitability measures. It uses econometric models to describe and then propose a method to forecast and benchmark performance.

Benchmarking of refinery emissions performance : Executive summary

International Nuclear Information System (INIS)

2003-07-01

This study was undertaken to collect emissions performance data for Canadian and comparable American refineries. The objective was to examine parameters that affect refinery air emissions performance and develop methods or correlations to normalize emissions performance. Another objective was to correlate and compare the performance of Canadian refineries to comparable American refineries. For the purpose of this study, benchmarking involved the determination of levels of emission performance that are being achieved for generic groups of facilities. A total of 20 facilities were included in the benchmarking analysis, and 74 American refinery emission correlations were developed. The recommended benchmarks, and the application of those correlations for comparison between Canadian and American refinery performance, were discussed. The benchmarks were: sulfur oxides, nitrogen oxides, carbon monoxide, particulate, volatile organic compounds, ammonia and benzene. For each refinery in Canada, benchmark emissions were developed. Several factors can explain differences in Canadian and American refinery emission performance. 4 tabs., 7 figs

How to Advance TPC Benchmarks with Dependability Aspects

Science.gov (United States)

Almeida, Raquel; Poess, Meikel; Nambiar, Raghunath; Patil, Indira; Vieira, Marco

Transactional systems are the core of the information systems of most organizations. Although there is general acknowledgement that failures in these systems often entail significant impact both on the proceeds and reputation of companies, the benchmarks developed and managed by the Transaction Processing Performance Council (TPC) still maintain their focus on reporting bare performance. Each TPC benchmark has to pass a list of dependability-related tests (to verify ACID properties), but not all benchmarks require measuring their performances. While TPC-E measures the recovery time of some system failures, TPC-H and TPC-C only require functional correctness of such recovery. Consequently, systems used in TPC benchmarks are tuned mostly for performance. In this paper we argue that nowadays systems should be tuned for a more comprehensive suite of dependability tests, and that a dependability metric should be part of TPC benchmark publications. The paper discusses WHY and HOW this can be achieved. Two approaches are introduced and discussed: augmenting each TPC benchmark in a customized way, by extending each specification individually; and pursuing a more unified approach, defining a generic specification that could be adjoined to any TPC benchmark.

Benchmark on hydrogen distribution in a containment based on the OECD-NEA THAI HM-2 experiment

International Nuclear Information System (INIS)

Schwarz, S.; Fischer, K.; Bentaib, A.

2009-01-01

Within the course of a hypothetical severe accident in a nuclear power plant, hydrogen can be generated in the primary circuit and released into the containment. Considering the possibility of a deflagration, the simulation of the hydrogen distribution in the containment by computer codes is of major importance. In order to create a data base for code validation, several distribution experiments using helium and hydrogen have been performed in the German THAI (Thermal-Hydraulics, Hydrogen, Aerosols, Iodine) facility. They started with the ISP-47 test TH13 and were followed by the HM (Hydrogen-Helium Material Scaling Tests) series. The objectives of the HM Tests are to confirm the transferability of existing helium distribution test data to hydrogen distribution problems, to understand the processes that lead to the formation and dissolution of a light cloud stratification. The test HM-2 was chosen for a code benchmark. During the first phase of test HM-2 a light gas cloud consisting of hydrogen and nitrogen was established in the upper half of the facility. In the second phase steam was injected at a lower position inducing a rising steam - nitrogen plume. The plume did not break through the cloud, because its density was higher than the density of the cloud. Therefore the cloud was gradually dissolved from its bottom. Eleven organisations performed 'blind' calculations to the HM-2 experiment. The lumped parameter (LP) codes ASTEC, COCOSYS and MELCOR and the CFD codes FLUENT, GASFLOW and GOTHIC were used. The main phenomena were natural convection, interaction between the rising plume and the light gas cloud, steam condensation on walls, fog behaviour and the heat up of the walls. The experimental data of the first phase had been published and the atmospheric stratification was simulated reasonably well. The data from the second phase stayed concealed until the simulated results were submitted. The thermal-hydraulic phenomena were predicted well by several LP- and

Adaptation of the fish juvenile growth test (OECD TG 215, 2000) to the marine species Dicentrarchus labrax.

Science.gov (United States)

Tornambè, A; Manfra, L; Canepa, S; Oteri, F; Martuccio, G; Cicero, A M; Magaletti, E

2018-02-01

The OECD TG 215 method (2000) (C.14 method of EC Regulation 440/2008) was developed on the rainbow trout (Oncorynchus mykiss) to assess chronic toxicity (28d) of chemicals on fish juveniles. It contemplates to use other well documented species identifying suitable conditions to evaluate their growth. OECD proposes the European sea bass (Dicentrarchus labrax, L. 1758) as Mediterranean species among vertebrates recommended in the OECD guidelines for the toxicity testing of chemicals. In this context, our study is aimed to proposing the adaptation of the growth test (OECD TG 215, 2000) to D. labrax. For this purpose toxicity tests were performed with sodium dodecyl sulfate, a reference toxicant commonly used in fish toxicity assays. The main aspects of the testing procedure were reviewed: fish size (weight), environmental conditions, dilution water type, experimental design, loading rate and stocking density, feeding (food type and ration), test validity criteria. The experience gained from growth tests with the sea bass allows to promote its inclusion among the species to be used for the C.14 method. Copyright © 2016. Published by Elsevier Inc.

ZZ ECN-BUBEBO, ECN-Petten Burnup Benchmark Book, Inventories, Afterheat

International Nuclear Information System (INIS)

Kloosterman, Jan Leen

1999-01-01

Description of program or function: Contains experimental benchmarks which can be used for the validation of burnup code systems and accompanied data libraries. Although the benchmarks presented here are thoroughly described in literature, it is in many cases not straightforward to retrieve unambiguously the correct input data and corresponding results from the benchmark Descriptions. Furthermore, results which can easily be measured, are sometimes difficult to calculate because of conversions to be made. Therefore, emphasis has been put to clarify the input of the benchmarks and to present the benchmark results in such a way that they can easily be calculated and compared. For more thorough Descriptions of the benchmarks themselves, the literature referred to here should be consulted. This benchmark book is divided in 11 chapters/files containing the following in text and tabular form: chapter 1: Introduction; chapter 2: Burnup Credit Criticality Benchmark Phase 1-B; chapter 3: Yankee-Rowe Core V Fuel Inventory Study; chapter 4: H.B. Robinson Unit 2 Fuel Inventory Study; chapter 5: Turkey Point Unit 3 Fuel Inventory Study; chapter 6: Turkey Point Unit 3 Afterheat Power Study; chapter 7: Dickens Benchmark on Fission Product Energy Release of U-235; chapter 8: Dickens Benchmark on Fission Product Energy Release of Pu-239; chapter 9: Yarnell Benchmark on Decay Heat Measurements of U-233; chapter 10: Yarnell Benchmark on Decay Heat Measurements of U-235; chapter 11: Yarnell Benchmark on Decay Heat Measurements of Pu-239

Introduction of regulatory and licensing procedures of some OECD countries in the field of decommissioning

International Nuclear Information System (INIS)

Benedekfi, O.; Zagyvai, P.; Czifrus, S.; Ormai, P.; Danko, G.

2001-01-01

In the OECD countries more than 50 nuclear power plants will have to be closed in the beginning of the next century since their licenses expire. For this reason it is very important to establish reasonable regulations in the field of decommissioning. In this poster firstly we define the basic principles related to decommissioning. Then we account on our survey of the situation of the regulatory and licensing procedures in some OECD countries. Finally we compare the results. (authors)

Does Corporate Income Taxation Affect Securitization? Evidence from OECD Banks

NARCIS (Netherlands)

Gong, D.; Ligthart, J.E.

2013-01-01

Abstract: Corporate income taxation, by affecting the after-tax cost of funding, has implications for a bank's incentive to securitize. Using a sample of OECD banks over the period 1999-2006, we fi nd that corporate income taxation led to more securitization at banks that are constrained in funding

Analysis of Benchmark 2 results

International Nuclear Information System (INIS)

Bacha, F.; Lefievre, B.; Maillard, J.; Silva, J.

1994-01-01

The code GEANT315 has been compared to different codes in two benchmarks. We analyze its performances through our results, especially in the thick target case. In spite of gaps in nucleus-nucleus interaction theories at intermediate energies, benchmarks allow possible improvements of physical models used in our codes. Thereafter, a scheme of radioactive waste burning system is studied. (authors). 4 refs., 7 figs., 1 tab

Benchmarking for Best Practice

CERN Document Server

Zairi, Mohamed

1998-01-01

Benchmarking for Best Practice uses up-to-the-minute case-studies of individual companies and industry-wide quality schemes to show how and why implementation has succeeded. For any practitioner wanting to establish best practice in a wide variety of business areas, this book makes essential reading. .It is also an ideal textbook on the applications of TQM since it describes concepts, covers definitions and illustrates the applications with first-hand examples. Professor Mohamed Zairi is an international expert and leading figure in the field of benchmarking. His pioneering work in this area l

HPCG Benchmark Technical Specification

Energy Technology Data Exchange (ETDEWEB)

Heroux, Michael Allen [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Dongarra, Jack [Univ. of Tennessee, Knoxville, TN (United States); Luszczek, Piotr [Univ. of Tennessee, Knoxville, TN (United States)

2013-10-01

The High Performance Conjugate Gradient (HPCG) benchmark [cite SNL, UTK reports] is a tool for ranking computer systems based on a simple additive Schwarz, symmetric Gauss-Seidel preconditioned conjugate gradient solver. HPCG is similar to the High Performance Linpack (HPL), or Top 500, benchmark [1] in its purpose, but HPCG is intended to better represent how today’s applications perform. In this paper we describe the technical details of HPCG: how it is designed and implemented, what code transformations are permitted and how to interpret and report results.

[Do you mean benchmarking?].

Science.gov (United States)

Bonnet, F; Solignac, S; Marty, J

2008-03-01

The purpose of benchmarking is to settle improvement processes by comparing the activities to quality standards. The proposed methodology is illustrated by benchmark business cases performed inside medical plants on some items like nosocomial diseases or organization of surgery facilities. Moreover, the authors have built a specific graphic tool, enhanced with balance score numbers and mappings, so that the comparison between different anesthesia-reanimation services, which are willing to start an improvement program, is easy and relevant. This ready-made application is even more accurate as far as detailed tariffs of activities are implemented.

Housing market volatility in the OECD area

DEFF Research Database (Denmark)

Engsted, Tom; Pedersen, Thomas Quistgaard

2014-01-01

Vector-autoregressive models are used to decompose housing returns in 18 OECD countries into cash flow (rent) news and discount rate (return) news over the period 1970-2011. For the jajority of countries news about future returns is the main driver, and both real interest rates and risk-premia play...... an important role in accounting for housing market volatility. Bivariate cross-country correlations and principal components analyses indicate that part of the return movements have a common factor among the majority of countries. We explain the results in terms of global changes in credit constraints...

Benchmarking in digital circuit design automation

NARCIS (Netherlands)

Jozwiak, L.; Gawlowski, D.M.; Slusarczyk, A.S.

2008-01-01

This paper focuses on benchmarking, which is the main experimental approach to the design method and EDA-tool analysis, characterization and evaluation. We discuss the importance and difficulties of benchmarking, as well as the recent research effort related to it. To resolve several serious

Benchmarking, Total Quality Management, and Libraries.

Science.gov (United States)

Shaughnessy, Thomas W.

1993-01-01

Discussion of the use of Total Quality Management (TQM) in higher education and academic libraries focuses on the identification, collection, and use of reliable data. Methods for measuring quality, including benchmarking, are described; performance measures are considered; and benchmarking techniques are examined. (11 references) (MES)

IMPACTS OF AFRICA'S TOTAL AND COMMODITY-BASED TRADE WITH CHINA AND OECD COUNTRIES

Directory of Open Access Journals (Sweden)

Nihal Bayraktar

2017-02-01

Full Text Available This paper studies the changes in the pattern of Africa’s trade with China and OECD countries, and the impacts of these changes on sub-Saharan Africa’s economic growth. In the study, the country-level total exports and imports, as well as the commodity-based exports and imports are considered for 42 sub-Saharan African countries between 1980 and 2014. The results show that as the share of China in sub-Saharan Africa’s trade has significantly increased, a declining trend is observed for OECD countries, traditional trading partners. Despite changing trade links, the investigation of the commodity-based exports and imports indicate that the types of imported and exported commodities have not changed much for Africa. However, a strong link is observed between economic growth in SSA and its changing trade links from the OECD countries towards China at the total level as well as at the commodity level. The study concludes that there is an increase in the international competition for Africa’s commodities, and resulting in improvements in the terms of trade has led to higher income growth in the region.

Toxicological benchmarks for wildlife: 1994 Revision

International Nuclear Information System (INIS)

Opresko, D.M.; Sample, B.E.; Suter, G.W. II.

1994-09-01

The process by which ecological risks of environmental contaminants are evaluated is two-tiered. The first tier is a screening assessment where concentrations of contaminants in the environment are compared to toxicological benchmarks which represent concentrations of chemicals in environmental media (water, sediment, soil, food, etc.) that are presumed to be nonhazardous to the surrounding biota. The second tier is a baseline ecological risk assessment where toxicological benchmarks are one of several lines of evidence used to support or refute the presence of ecological effects. The report presents toxicological benchmarks for assessment of effects of 76 chemicals on 8 representative mammalian wildlife species and 31 chemicals on 9 avian wildlife species. The chemicals are some of those that occur at United States Department of Energy waste sites; the wildlife species were chosen because they are widely distributed and provide a representative range of body sizes and diets. Further descriptions of the chosen wildlife species and chemicals are provided in the report. The benchmarks presented in this report represent values believed to be nonhazardous for the listed wildlife species. These benchmarks only consider contaminant exposure through oral ingestion of contaminated media; exposure through inhalation or direct dermal exposure are not considered in this report

Toxicological benchmarks for wildlife: 1994 Revision

Energy Technology Data Exchange (ETDEWEB)

Opresko, D.M.; Sample, B.E.; Suter, G.W. II

1994-09-01

The process by which ecological risks of environmental contaminants are evaluated is two-tiered. The first tier is a screening assessment where concentrations of contaminants in the environment are compared to toxicological benchmarks which represent concentrations of chemicals in environmental media (water, sediment, soil, food, etc.) that are presumed to be nonhazardous to the surrounding biota. The second tier is a baseline ecological risk assessment where toxicological benchmarks are one of several lines of evidence used to support or refute the presence of ecological effects. The report presents toxicological benchmarks for assessment of effects of 76 chemicals on 8 representative mammalian wildlife species and 31 chemicals on 9 avian wildlife species. The chemicals are some of those that occur at United States Department of Energy waste sites; the wildlife species were chosen because they are widely distributed and provide a representative range of body sizes and diets. Further descriptions of the chosen wildlife species and chemicals are provided in the report. The benchmarks presented in this report represent values believed to be nonhazardous for the listed wildlife species. These benchmarks only consider contaminant exposure through oral ingestion of contaminated media; exposure through inhalation or direct dermal exposure are not considered in this report.

INTEGRAL BENCHMARKS AVAILABLE THROUGH THE INTERNATIONAL REACTOR PHYSICS EXPERIMENT EVALUATION PROJECT AND THE INTERNATIONAL CRITICALITY SAFETY BENCHMARK EVALUATION PROJECT

Energy Technology Data Exchange (ETDEWEB)

J. Blair Briggs; Lori Scott; Enrico Sartori; Yolanda Rugama

2008-09-01

Interest in high-quality integral benchmark data is increasing as efforts to quantify and reduce calculational uncertainties accelerate to meet the demands of next generation reactor and advanced fuel cycle concepts. The International Reactor Physics Experiment Evaluation Project (IRPhEP) and the International Criticality Safety Benchmark Evaluation Project (ICSBEP) continue to expand their efforts and broaden their scope to identify, evaluate, and provide integral benchmark data for method and data validation. Benchmark model specifications provided by these two projects are used heavily by the international reactor physics, nuclear data, and criticality safety communities. Thus far, 14 countries have contributed to the IRPhEP, and 20 have contributed to the ICSBEP. The status of the IRPhEP and ICSBEP is discussed in this paper, and the future of the two projects is outlined and discussed. Selected benchmarks that have been added to the IRPhEP and ICSBEP handbooks since PHYSOR’06 are highlighted, and the future of the two projects is discussed.

INTEGRAL BENCHMARKS AVAILABLE THROUGH THE INTERNATIONAL REACTOR PHYSICS EXPERIMENT EVALUATION PROJECT AND THE INTERNATIONAL CRITICALITY SAFETY BENCHMARK EVALUATION PROJECT

International Nuclear Information System (INIS)

J. Blair Briggs; Lori Scott; Enrico Sartori; Yolanda Rugama

2008-01-01

Interest in high-quality integral benchmark data is increasing as efforts to quantify and reduce calculational uncertainties accelerate to meet the demands of next generation reactor and advanced fuel cycle concepts. The International Reactor Physics Experiment Evaluation Project (IRPhEP) and the International Criticality Safety Benchmark Evaluation Project (ICSBEP) continue to expand their efforts and broaden their scope to identify, evaluate, and provide integral benchmark data for method and data validation. Benchmark model specifications provided by these two projects are used heavily by the international reactor physics, nuclear data, and criticality safety communities. Thus far, 14 countries have contributed to the IRPhEP, and 20 have contributed to the ICSBEP. The status of the IRPhEP and ICSBEP is discussed in this paper, and the future of the two projects is outlined and discussed. Selected benchmarks that have been added to the IRPhEP and ICSBEP handbooks since PHYSOR-06 are highlighted, and the future of the two projects is discussed

Rasplav. A unique OECD/Russian experimental/analytical program in severe accident management/mitigation

International Nuclear Information System (INIS)

Speis, T.P.; Behbahani, A.

1995-01-01

In 1994 the Nuclear Energy Agency of the Organization for Economic Cooperation and Development (NEA-OECD) sponsored the RASPLAV project in Russia to carry out an integrated program of experiments and analyses to address the conditions under which a degraded/molten core can be retained inside the reactor pressure vessel via cooling of the vessel from outside. The background, the objectives, the technical issues associated with, the utilization of the results and the benefits to the participating countries are discussed, involving Russian partnership with the most advanced OECD member countries in a project which will be carried out at the Kurchatov Institute in Russia. (author). 1 fig

The Role of the OECD and the EU in the Development of Labour Market Policy in the Czech Republic

DEFF Research Database (Denmark)

Porte, Caroline de la

2009-01-01

This article analyses the role of the OECD through its "Jobs Strategy" and the European Union (EU) through the "European Employment Strategy" in the development of macro-economic, employment and labour market policy in the Czech Republic. As a full member of the two organisations, the Czech...... Republic has been subject to their soft non-binding policy advice in the area of labour market reform. The OECD and EU policy models are similar, both insisting on growth-oriented macro-economic policy, supported by active labour market policies, an active and effective public employment service (PES......) and the de-regulation of labour markets. However, the OECD actively advocates private actor involvement in labour markets, while the EU insists on the role of the public sector. The inquisitive styles of the two organisations differ: the OECD has a decontextualised and quantified analysis of performance...

Financial Integrity Benchmarks

Data.gov (United States)

City of Jackson, Mississippi — This data compiles standard financial integrity benchmarks that allow the City to measure its financial standing. It measure the City's debt ratio and bond ratings....

Analysis of a molten salt reactor benchmark

International Nuclear Information System (INIS)

Ghosh, Biplab; Bajpai, Anil; Degweker, S.B.

2013-01-01

This paper discusses results of our studies of an IAEA molten salt reactor (MSR) benchmark. The benchmark, proposed by Japan, involves burnup calculations of a single lattice cell of a MSR for burning plutonium and other minor actinides. We have analyzed this cell with in-house developed burnup codes BURNTRAN and McBURN. This paper also presents a comparison of the results of our codes and those obtained by the proposers of the benchmark. (author)

Reactor fuel depletion benchmark of TINDER

International Nuclear Information System (INIS)

Martin, W.J.; Oliveira, C.R.E. de; Hecht, A.A.

2014-01-01

Highlights: • A reactor burnup benchmark of TINDER, coupling MCNP6 to CINDER2008, was performed. • TINDER is a poor candidate for fuel depletion calculations using its current libraries. • Data library modification is necessary if fuel depletion is desired from TINDER. - Abstract: Accurate burnup calculations are key to proper nuclear reactor design, fuel cycle modeling, and disposal estimations. The TINDER code, originally designed for activation analyses, has been modified to handle full burnup calculations, including the widely used predictor–corrector feature. In order to properly characterize the performance of TINDER for this application, a benchmark calculation was performed. Although the results followed the trends of past benchmarked codes for a UO 2 PWR fuel sample from the Takahama-3 reactor, there were obvious deficiencies in the final result, likely in the nuclear data library that was used. Isotopic comparisons versus experiment and past code benchmarks are given, as well as hypothesized areas of deficiency and future work

Does corporate income taxation affect securitization? : Evidence from OECD banks

NARCIS (Netherlands)

Gong, Di; Hu, Shiwei; Ligthart, J.E.

2015-01-01

Corporate income taxation, by affecting the after-tax cost of funding, has implications for a bank’s incentive to securitize. Using a sample of OECD banks over the period 1999–2006, we find that corporate income taxation led to more securitization at banks that are constrained in funding markets,

OECD Ülkelerinde Eğlence Vergisi Uygulamaları(Amusement Tax Applications in the OECD Countries

Directory of Open Access Journals (Sweden)

Bernur AÇIKGÖZ ERSOY

2010-01-01

Full Text Available In the 17th century, “the right of the poor” was a transitory tax on the income of entertainment in favor of public assistance in France. “The right of the poor” was abolished later by the regime of Vichy, which created a permanent tax on games and entertainment to the direct benefit of the communes. Later, other European countries followed the example of France by introducing a so-called amusement tax. The paper is organized as follows: The first part presents the historical development and theoretical base of amusement tax and amusement tax applications in the OECD countries. The second part shows the amusement tax application in Turkey, and the last part resumes arguments in favor of the maintenance or an abolishment of the tax on entertainment.

Benchmarking: contexts and details matter.

Science.gov (United States)

Zheng, Siyuan

2017-07-05

Benchmarking is an essential step in the development of computational tools. We take this opportunity to pitch in our opinions on tool benchmarking, in light of two correspondence articles published in Genome Biology.Please see related Li et al. and Newman et al. correspondence articles: www.dx.doi.org/10.1186/s13059-017-1256-5 and www.dx.doi.org/10.1186/s13059-017-1257-4.

OECD/NEA study on the economics of the long-term operation of nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

Lokhov, A.; Cameron, R. [OECD Nuclear Energy Agency, 12, boulevard des Iles, 92130 Issy-les-Moulineaux (France)

2012-07-01

The OECD Nuclear Energy Agency (NEA) established the Ad hoc expert group on the Economics of Long-term Operation (LTO) of Nuclear Power Plants. The primary aim of this group is to collect and analyse technical and economic data on the upgrade and lifetime extension experience in OECD countries, and to assess the likely applications for future extensions. This paper describes the key elements of the methodology of economic assessment of LTO and initial findings for selected NEA member countries. (authors)

Intergovernmental organisation activities: European Atomic Energy Community, International Atomic Energy Agency, OECD Nuclear Energy Agency

International Nuclear Information System (INIS)

Anon.

2012-01-01

European Atomic Energy Community: Proposed legislative instruments, Adopted legislative instruments, Non-legislative instruments, Other activities (meetings). International Atomic Energy Agency: IAEA Action Plan on Nuclear Safety. OECD Nuclear Energy Agency: The Russian Federation to join the OECD Nuclear Energy Agency; Participation by the regulatory authorities of India and the United Arab Emirates in the Multinational Design Evaluation Programme (MDEP); NEA International Workshop on Crisis Communication, 9-10 May 2012; International School of Nuclear Law: 2013; Next NEA International Nuclear Law Essentials Course

THAI experimental programme for containment safety assessment under severe accident conditions

Energy Technology Data Exchange (ETDEWEB)

Gupta, S.; Freitag, M. [Becker Technologies GmbH, Eschborn (Germany); Poss, G.

2016-05-15

The THAI (THAI = Thermal hydraulics, Hydrogen, Aerosols, Iodine) experimental programme aims to address open questions concerning the behavior of hydrogen, iodine and aerosols in the containment of water cooled reactors. Since its construction in 2000, THAI programme is being performed in the frame of various national projects (sponsored by German Federal Ministry for Economic Affairs and Energy, BMWi) and two international joint projects (under auspices of OECD/NEA). THAI experimental data have been widely used for the validation and further development of Lumped Parameter (LP) and Computational Fluid Dynamics (CFD) codes with 3D capabilities. Selected examples of code benchmark exercises performed based on the THAI data include; hydrogen distribution experiment (ISP-47 and OECD/NEA THAI code benchmark), hydrogen combustion behaviour (ISP-49), hydrogen mitigation by PARs (OECD/NEA THAI-2 code benchmark), iodine/surface interactions, iodine mass transfer, and iodine transport and multi-compartment behaviour (EU-SARNET and EU-SARNET2), thermal-hydraulic tests (German CFD-network). In the present paper, a brief overview on the THAI experiments and their role in the containment safety assessment is discussed.

Benchmark analysis of MCNP trademark ENDF/B-VI iron

International Nuclear Information System (INIS)

Court, J.D.; Hendricks, J.S.

1994-12-01

The MCNP ENDF/B-VI iron cross-section data was subjected to four benchmark studies as part of the Hiroshima/Nagasaki dose re-evaluation for the National Academy of Science and the Defense Nuclear Agency. The four benchmark studies were: (1) the iron sphere benchmarks from the Lawrence Livermore Pulsed Spheres; (2) the Oak Ridge National Laboratory Fusion Reactor Shielding Benchmark; (3) a 76-cm diameter iron sphere benchmark done at the University of Illinois; (4) the Oak Ridge National Laboratory Benchmark for Neutron Transport through Iron. MCNP4A was used to model each benchmark and computational results from the ENDF/B-VI iron evaluations were compared to ENDF/B-IV, ENDF/B-V, the MCNP Recommended Data Set (which includes Los Alamos National Laboratory Group T-2 evaluations), and experimental data. The results show that the ENDF/B-VI iron evaluations are as good as, or better than, previous data sets

Tax Havens and the OECD Campaign Against them

OpenAIRE

Narci, Hakan

2012-01-01

There are two essential primary purposes for this thesis. The first has been to highlight the phenomena Tax Havens with its economical impact on other countries outlined in chapter two. Firstly the concept of tax havens is presented based on the OECD definition. Secondly the secrecy legislation, regulation and the corporate structures which tax havens offer to foreign investors and firms are given with their significance for other states. Thirdly, the ways tax havens are used b...

Diagnostic Algorithm Benchmarking

Science.gov (United States)

Poll, Scott

2011-01-01

A poster for the NASA Aviation Safety Program Annual Technical Meeting. It describes empirical benchmarking on diagnostic algorithms using data from the ADAPT Electrical Power System testbed and a diagnostic software framework.

Working group on VVER safety analysis - report of the 2010 meeting

International Nuclear Information System (INIS)

Kliem, S.

2010-01-01

The AER Working Group D on WWER reactor safety analysis held its nineteenth meeting in Pisa, Italy, during the period 15-16 April, 2010. The meeting was hosted by the San Piero a Grado Nuclear Research Group of the University of Pisa and was held in conjunction with the second workshop on the OECD/NEA Benchmark for the Kalinin-3 WWER-1000 NPP and the fourth workshop on the OECD Benchmark for Uncertainty Analysis in Best-Estimate Modelling (UAM) for Design, Operation and Safety Analysis of LWRs. Altogether 12 participants attended the meeting of the working group D, 8 from AER member organizations and 4 guests from non-member organization. The co-ordinator of the working group, Mr. S. Kliem, served as chairman of the meeting. The meeting started with a general information exchange about the recent activities in the participating organizations. The given presentations and the discussions can be attributed to the following topics:-Code validation and benchmarking including the calculation of the OECD/NEA Benchmark for the Kalinin-3 WWER-1000 NPP;-Safety analyses and code developments;-Future activities A list of the participants and a list of the handouts distributed at the meeting are attached to the report. The corresponding PDF-files can be obtained from the chairman. (Author)

Experimental Results of A1.1 Test for OECD-ATLAS Project

Energy Technology Data Exchange (ETDEWEB)

Kang, Kyoung-Ho; Bae, Byoung-Uhn; Park, Yu-Sun; Kim, Jong-Rok; Choi, Nam-Hyun; Choi, Ki-Yong [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2015-10-15

KAERI (Korea Atomic Energy Research Institute) is operating an OECD/NEA project (hereafter, OECD-ATLAS project) by utilizing a thermal-hydraulic integral effect test facility, ATLAS (Advanced Thermal-hydraulic Test Loop for Accident Simulation). Considering the importance of the SBO scenario and the related accident mitigation measures, a prolonged SBO scenario was selected as the first test subject worthy of investigation in the OECD-ATLAS project as summarized in Table 1. After the Fukushima accident, design extension conditions (DECs) such as an SBO and a total loss of feed water (TLOFW) attracted wide international attention in that such high-risk multiple failure accidents should be revisited from the viewpoint of the reinforcement of the 'defense in depth' concept. In particular, an SBO is one of the most important DECs because a total loss of heat sink can lead to a core melt-down scenario under high pressure without any proper operator action. As for a prolonged SBO transient of the OECD-ATLAS project, two tests, named A1.1 and A1.2, were determined to be performed. In most nuclear power plants (NPPs), a turbine-driven auxiliary feedwater system was designed to remove the decay heat during the early period of an SBO transient. From a conservative point of view, however, it is necessary to investigate the thermal-hydraulic behaviors of the NPP when a turbine-driven auxiliary feedwater supply is not available during the initial period of an SBO transient and moreover a mobile pump-driven auxiliary feedwater supply can only become realized in the later period of the scenario. In particular, asymmetric heat removal characteristic through the supply of auxiliary feedwater only to one steam generator has its own peculiar importance in terms of safety analysis code validation. With an aim of considering these safety importance, in the A1.1 test, a prolonged SBO transient was simulated with two temporal phases: Phase (I) for a conservative SBO transient